Input: enable onkey driver of max8925
When ONKEY is held for 3 seconds, KEY_POWER event is reported.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
diff --git a/drivers/input/misc/max8925_onkey.c b/drivers/input/misc/max8925_onkey.c
new file mode 100644
index 0000000..80af446
--- /dev/null
+++ b/drivers/input/misc/max8925_onkey.c
@@ -0,0 +1,148 @@
+/**
+ * max8925_onkey.c - MAX8925 ONKEY driver
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max8925.h>
+#include <linux/slab.h>
+
+#define HARDRESET_EN (1 << 7)
+#define PWREN_EN (1 << 7)
+
+struct max8925_onkey_info {
+ struct input_dev *idev;
+ struct i2c_client *i2c;
+ int irq;
+};
+
+/*
+ * MAX8925 gives us an interrupt when ONKEY is held for 3 seconds.
+ * max8925_set_bits() operates I2C bus and may sleep. So implement
+ * it in thread IRQ handler.
+ */
+static irqreturn_t max8925_onkey_handler(int irq, void *data)
+{
+ struct max8925_onkey_info *info = data;
+
+ input_report_key(info->idev, KEY_POWER, 1);
+ input_sync(info->idev);
+
+ /* Enable hardreset to halt if system isn't shutdown on time */
+ max8925_set_bits(info->i2c, MAX8925_SYSENSEL,
+ HARDRESET_EN, HARDRESET_EN);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit max8925_onkey_probe(struct platform_device *pdev)
+{
+ struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct max8925_onkey_info *info;
+ int error;
+
+ info = kzalloc(sizeof(struct max8925_onkey_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->i2c = chip->i2c;
+ info->irq = chip->irq_base + MAX8925_IRQ_GPM_SW_3SEC;
+
+ info->idev = input_allocate_device();
+ if (!info->idev) {
+ dev_err(chip->dev, "Failed to allocate input dev\n");
+ error = -ENOMEM;
+ goto out_input;
+ }
+
+ info->idev->name = "max8925_on";
+ info->idev->phys = "max8925_on/input0";
+ info->idev->id.bustype = BUS_I2C;
+ info->idev->dev.parent = &pdev->dev;
+ info->idev->evbit[0] = BIT_MASK(EV_KEY);
+ info->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+
+ error = request_threaded_irq(info->irq, NULL, max8925_onkey_handler,
+ IRQF_ONESHOT, "onkey", info);
+ if (error < 0) {
+ dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+ info->irq, error);
+ goto out_irq;
+ }
+
+ error = input_register_device(info->idev);
+ if (error) {
+ dev_err(chip->dev, "Can't register input device: %d\n", error);
+ goto out;
+ }
+
+ platform_set_drvdata(pdev, info);
+
+ return 0;
+
+out:
+ free_irq(info->irq, info);
+out_irq:
+ input_free_device(info->idev);
+out_input:
+ kfree(info);
+ return error;
+}
+
+static int __devexit max8925_onkey_remove(struct platform_device *pdev)
+{
+ struct max8925_onkey_info *info = platform_get_drvdata(pdev);
+
+ free_irq(info->irq, info);
+ input_unregister_device(info->idev);
+ kfree(info);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver max8925_onkey_driver = {
+ .driver = {
+ .name = "max8925-onkey",
+ .owner = THIS_MODULE,
+ },
+ .probe = max8925_onkey_probe,
+ .remove = __devexit_p(max8925_onkey_remove),
+};
+
+static int __init max8925_onkey_init(void)
+{
+ return platform_driver_register(&max8925_onkey_driver);
+}
+module_init(max8925_onkey_init);
+
+static void __exit max8925_onkey_exit(void)
+{
+ platform_driver_unregister(&max8925_onkey_driver);
+}
+module_exit(max8925_onkey_exit);
+
+MODULE_DESCRIPTION("Maxim MAX8925 ONKEY driver");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");