| /* * This file is part of UBIFS. |
| * |
| * Copyright (C) 2006-2008 Nokia Corporation. |
| * Copyright (C) 2006, 2007 University of Szeged, Hungary |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., 51 |
| * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| * Authors: Artem Bityutskiy (Битюцкий Артём) |
| * Adrian Hunter |
| * Zoltan Sogor |
| */ |
| |
| /* |
| * This file implements directory operations. |
| * |
| * All FS operations in this file allocate budget before writing anything to the |
| * media. If they fail to allocate it, the error is returned. The only |
| * exceptions are 'ubifs_unlink()' and 'ubifs_rmdir()' which keep working even |
| * if they unable to allocate the budget, because deletion %-ENOSPC failure is |
| * not what users are usually ready to get. UBIFS budgeting subsystem has some |
| * space reserved for these purposes. |
| * |
| * All operations in this file write all inodes which they change straight |
| * away, instead of marking them dirty. For example, 'ubifs_link()' changes |
| * @i_size of the parent inode and writes the parent inode together with the |
| * target inode. This was done to simplify file-system recovery which would |
| * otherwise be very difficult to do. The only exception is rename which marks |
| * the re-named inode dirty (because its @i_ctime is updated) but does not |
| * write it, but just marks it as dirty. |
| */ |
| |
| #include "ubifs.h" |
| |
| /** |
| * inherit_flags - inherit flags of the parent inode. |
| * @dir: parent inode |
| * @mode: new inode mode flags |
| * |
| * This is a helper function for 'ubifs_new_inode()' which inherits flag of the |
| * parent directory inode @dir. UBIFS inodes inherit the following flags: |
| * o %UBIFS_COMPR_FL, which is useful to switch compression on/of on |
| * sub-directory basis; |
| * o %UBIFS_SYNC_FL - useful for the same reasons; |
| * o %UBIFS_DIRSYNC_FL - similar, but relevant only to directories. |
| * |
| * This function returns the inherited flags. |
| */ |
| static int inherit_flags(const struct inode *dir, umode_t mode) |
| { |
| int flags; |
| const struct ubifs_inode *ui = ubifs_inode(dir); |
| |
| if (!S_ISDIR(dir->i_mode)) |
| /* |
| * The parent is not a directory, which means that an extended |
| * attribute inode is being created. No flags. |
| */ |
| return 0; |
| |
| flags = ui->flags & (UBIFS_COMPR_FL | UBIFS_SYNC_FL | UBIFS_DIRSYNC_FL); |
| if (!S_ISDIR(mode)) |
| /* The "DIRSYNC" flag only applies to directories */ |
| flags &= ~UBIFS_DIRSYNC_FL; |
| return flags; |
| } |
| |
| /** |
| * ubifs_new_inode - allocate new UBIFS inode object. |
| * @c: UBIFS file-system description object |
| * @dir: parent directory inode |
| * @mode: inode mode flags |
| * |
| * This function finds an unused inode number, allocates new inode and |
| * initializes it. Returns new inode in case of success and an error code in |
| * case of failure. |
| */ |
| struct inode *ubifs_new_inode(struct ubifs_info *c, const struct inode *dir, |
| umode_t mode) |
| { |
| struct inode *inode; |
| struct ubifs_inode *ui; |
| |
| inode = new_inode(c->vfs_sb); |
| ui = ubifs_inode(inode); |
| if (!inode) |
| return ERR_PTR(-ENOMEM); |
| |
| /* |
| * Set 'S_NOCMTIME' to prevent VFS form updating [mc]time of inodes and |
| * marking them dirty in file write path (see 'file_update_time()'). |
| * UBIFS has to fully control "clean <-> dirty" transitions of inodes |
| * to make budgeting work. |
| */ |
| inode->i_flags |= S_NOCMTIME; |
| |
| inode_init_owner(inode, dir, mode); |
| inode->i_mtime = inode->i_atime = inode->i_ctime = |
| ubifs_current_time(inode); |
| inode->i_mapping->nrpages = 0; |
| |
| switch (mode & S_IFMT) { |
| case S_IFREG: |
| inode->i_mapping->a_ops = &ubifs_file_address_operations; |
| inode->i_op = &ubifs_file_inode_operations; |
| inode->i_fop = &ubifs_file_operations; |
| break; |
| case S_IFDIR: |
| inode->i_op = &ubifs_dir_inode_operations; |
| inode->i_fop = &ubifs_dir_operations; |
| inode->i_size = ui->ui_size = UBIFS_INO_NODE_SZ; |
| break; |
| case S_IFLNK: |
| inode->i_op = &ubifs_symlink_inode_operations; |
| break; |
| case S_IFSOCK: |
| case S_IFIFO: |
| case S_IFBLK: |
| case S_IFCHR: |
| inode->i_op = &ubifs_file_inode_operations; |
| break; |
| default: |
| BUG(); |
| } |
| |
| ui->flags = inherit_flags(dir, mode); |
| ubifs_set_inode_flags(inode); |
| if (S_ISREG(mode)) |
| ui->compr_type = c->default_compr; |
| else |
| ui->compr_type = UBIFS_COMPR_NONE; |
| ui->synced_i_size = 0; |
| |
| spin_lock(&c->cnt_lock); |
| /* Inode number overflow is currently not supported */ |
| if (c->highest_inum >= INUM_WARN_WATERMARK) { |
| if (c->highest_inum >= INUM_WATERMARK) { |
| spin_unlock(&c->cnt_lock); |
| ubifs_err("out of inode numbers"); |
| make_bad_inode(inode); |
| iput(inode); |
| return ERR_PTR(-EINVAL); |
| } |
| ubifs_warn("running out of inode numbers (current %lu, max %d)", |
| (unsigned long)c->highest_inum, INUM_WATERMARK); |
| } |
| |
| inode->i_ino = ++c->highest_inum; |
| /* |
| * The creation sequence number remains with this inode for its |
| * lifetime. All nodes for this inode have a greater sequence number, |
| * and so it is possible to distinguish obsolete nodes belonging to a |
| * previous incarnation of the same inode number - for example, for the |
| * purpose of rebuilding the index. |
| */ |
| ui->creat_sqnum = ++c->max_sqnum; |
| spin_unlock(&c->cnt_lock); |
| return inode; |
| } |
| |
| static int dbg_check_name(const struct ubifs_info *c, |
| const struct ubifs_dent_node *dent, |
| const struct qstr *nm) |
| { |
| if (!dbg_is_chk_gen(c)) |
| return 0; |
| if (le16_to_cpu(dent->nlen) != nm->len) |
| return -EINVAL; |
| if (memcmp(dent->name, nm->name, nm->len)) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static struct dentry *ubifs_lookup(struct inode *dir, struct dentry *dentry, |
| unsigned int flags) |
| { |
| int err; |
| union ubifs_key key; |
| struct inode *inode = NULL; |
| struct ubifs_dent_node *dent; |
| struct ubifs_info *c = dir->i_sb->s_fs_info; |
| |
| dbg_gen("'%pd' in dir ino %lu", dentry, dir->i_ino); |
| |
| if (dentry->d_name.len > UBIFS_MAX_NLEN) |
| return ERR_PTR(-ENAMETOOLONG); |
| |
| dent = kmalloc(UBIFS_MAX_DENT_NODE_SZ, GFP_NOFS); |
| if (!dent) |
| return ERR_PTR(-ENOMEM); |
| |
| dent_key_init(c, &key, dir->i_ino, &dentry->d_name); |
| |
| err = ubifs_tnc_lookup_nm(c, &key, dent, &dentry->d_name); |
| if (err) { |
| if (err == -ENOENT) { |
| dbg_gen("not found"); |
| goto done; |
| } |
| goto out; |
| } |
| |
| if (dbg_check_name(c, dent, &dentry->d_name)) { |
| err = -EINVAL; |
| goto out; |
| } |
| |
| inode = ubifs_iget(dir->i_sb, le64_to_cpu(dent->inum)); |
| if (IS_ERR(inode)) { |
| /* |
| * This should not happen. Probably the file-system needs |
| * checking. |
| */ |
| err = PTR_ERR(inode); |
| ubifs_err("dead directory entry '%pd', error %d", |
| dentry, err); |
| ubifs_ro_mode(c, err); |
| goto out; |
| } |
| |
| done: |
| kfree(dent); |
| /* |
| * Note, d_splice_alias() would be required instead if we supported |
| * NFS. |
| */ |
| d_add(dentry, inode); |
| return NULL; |
| |
| out: |
| kfree(dent); |
| return ERR_PTR(err); |
| } |
| |
| static int ubifs_create(struct inode *dir, struct dentry *dentry, umode_t mode, |
| bool excl) |
| { |
| struct inode *inode; |
| struct ubifs_info *c = dir->i_sb->s_fs_info; |
| int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len); |
| struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1, |
| .dirtied_ino = 1 }; |
| struct ubifs_inode *dir_ui = ubifs_inode(dir); |
| |
| /* |
| * Budget request settings: new inode, new direntry, changing the |
| * parent directory inode. |
| */ |
| |
| dbg_gen("dent '%pd', mode %#hx in dir ino %lu", |
| dentry, mode, dir->i_ino); |
| |
| err = ubifs_budget_space(c, &req); |
| if (err) |
| return err; |
| |
| inode = ubifs_new_inode(c, dir, mode); |
| if (IS_ERR(inode)) { |
| err = PTR_ERR(inode); |
| goto out_budg; |
| } |
| |
| err = ubifs_init_security(dir, inode, &dentry->d_name); |
| if (err) |
| goto out_cancel; |
| |
| mutex_lock(&dir_ui->ui_mutex); |
| dir->i_size += sz_change; |
| dir_ui->ui_size = dir->i_size; |
| dir->i_mtime = dir->i_ctime = inode->i_ctime; |
| err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0); |
| if (err) |
| goto out_cancel; |
| mutex_unlock(&dir_ui->ui_mutex); |
| |
| ubifs_release_budget(c, &req); |
| insert_inode_hash(inode); |
| d_instantiate(dentry, inode); |
| return 0; |
| |
| out_cancel: |
| dir->i_size -= sz_change; |
| dir_ui->ui_size = dir->i_size; |
| mutex_unlock(&dir_ui->ui_mutex); |
| make_bad_inode(inode); |
| iput(inode); |
| out_budg: |
| ubifs_release_budget(c, &req); |
| ubifs_err("cannot create regular file, error %d", err); |
| return err; |
| } |
| |
| /** |
| * vfs_dent_type - get VFS directory entry type. |
| * @type: UBIFS directory entry type |
| * |
| * This function converts UBIFS directory entry type into VFS directory entry |
| * type. |
| */ |
| static unsigned int vfs_dent_type(uint8_t type) |
| { |
| switch (type) { |
| case UBIFS_ITYPE_REG: |
| return DT_REG; |
| case UBIFS_ITYPE_DIR: |
| return DT_DIR; |
| case UBIFS_ITYPE_LNK: |
| return DT_LNK; |
| case UBIFS_ITYPE_BLK: |
| return DT_BLK; |
| case UBIFS_ITYPE_CHR: |
| return DT_CHR; |
| case UBIFS_ITYPE_FIFO: |
| return DT_FIFO; |
| case UBIFS_ITYPE_SOCK: |
| return DT_SOCK; |
| default: |
| BUG(); |
| } |
| return 0; |
| } |
| |
| /* |
| * The classical Unix view for directory is that it is a linear array of |
| * (name, inode number) entries. Linux/VFS assumes this model as well. |
| * Particularly, 'readdir()' call wants us to return a directory entry offset |
| * which later may be used to continue 'readdir()'ing the directory or to |
| * 'seek()' to that specific direntry. Obviously UBIFS does not really fit this |
| * model because directory entries are identified by keys, which may collide. |
| * |
| * UBIFS uses directory entry hash value for directory offsets, so |
| * 'seekdir()'/'telldir()' may not always work because of possible key |
| * collisions. But UBIFS guarantees that consecutive 'readdir()' calls work |
| * properly by means of saving full directory entry name in the private field |
| * of the file description object. |
| * |
| * This means that UBIFS cannot support NFS which requires full |
| * 'seekdir()'/'telldir()' support. |
| */ |
| static int ubifs_readdir(struct file *file, struct dir_context *ctx) |
| { |
| int err; |
| struct qstr nm; |
| union ubifs_key key; |
| struct ubifs_dent_node *dent; |
| struct inode *dir = file_inode(file); |
| struct ubifs_info *c = dir->i_sb->s_fs_info; |
| |
| dbg_gen("dir ino %lu, f_pos %#llx", dir->i_ino, ctx->pos); |
| |
| if (ctx->pos > UBIFS_S_KEY_HASH_MASK || ctx->pos == 2) |
| /* |
| * The directory was seek'ed to a senseless position or there |
| * are no more entries. |
| */ |
| return 0; |
| |
| if (file->f_version == 0) { |
| /* |
| * The file was seek'ed, which means that @file->private_data |
| * is now invalid. This may also be just the first |
| * 'ubifs_readdir()' invocation, in which case |
| * @file->private_data is NULL, and the below code is |
| * basically a no-op. |
| */ |
| kfree(file->private_data); |
| file->private_data = NULL; |
| } |
| |
| /* |
| * 'generic_file_llseek()' unconditionally sets @file->f_version to |
| * zero, and we use this for detecting whether the file was seek'ed. |
| */ |
| file->f_version = 1; |
| |
| /* File positions 0 and 1 correspond to "." and ".." */ |
| if (ctx->pos < 2) { |
| ubifs_assert(!file->private_data); |
| if (!dir_emit_dots(file, ctx)) |
| return 0; |
| |
| /* Find the first entry in TNC and save it */ |
| lowest_dent_key(c, &key, dir->i_ino); |
| nm.name = NULL; |
| dent = ubifs_tnc_next_ent(c, &key, &nm); |
| if (IS_ERR(dent)) { |
| err = PTR_ERR(dent); |
| goto out; |
| } |
| |
| ctx->pos = key_hash_flash(c, &dent->key); |
| file->private_data = dent; |
| } |
| |
| dent = file->private_data; |
| if (!dent) { |
| /* |
| * The directory was seek'ed to and is now readdir'ed. |
| * Find the entry corresponding to @ctx->pos or the closest one. |
| */ |
| dent_key_init_hash(c, &key, dir->i_ino, ctx->pos); |
| nm.name = NULL; |
| dent = ubifs_tnc_next_ent(c, &key, &nm); |
| if (IS_ERR(dent)) { |
| err = PTR_ERR(dent); |
| goto out; |
| } |
| ctx->pos = key_hash_flash(c, &dent->key); |
| file->private_data = dent; |
| } |
| |
| while (1) { |
| dbg_gen("feed '%s', ino %llu, new f_pos %#x", |
| dent->name, (unsigned long long)le64_to_cpu(dent->inum), |
| key_hash_flash(c, &dent->key)); |
| ubifs_assert(le64_to_cpu(dent->ch.sqnum) > |
| ubifs_inode(dir)->creat_sqnum); |
| |
| nm.len = le16_to_cpu(dent->nlen); |
| if (!dir_emit(ctx, dent->name, nm.len, |
| le64_to_cpu(dent->inum), |
| vfs_dent_type(dent->type))) |
| return 0; |
| |
| /* Switch to the next entry */ |
| key_read(c, &dent->key, &key); |
| nm.name = dent->name; |
| dent = ubifs_tnc_next_ent(c, &key, &nm); |
| if (IS_ERR(dent)) { |
| err = PTR_ERR(dent); |
| goto out; |
| } |
| |
| kfree(file->private_data); |
| ctx->pos = key_hash_flash(c, &dent->key); |
| file->private_data = dent; |
| cond_resched(); |
| } |
| |
| out: |
| if (err != -ENOENT) { |
| ubifs_err("cannot find next direntry, error %d", err); |
| return err; |
| } |
| |
| kfree(file->private_data); |
| file->private_data = NULL; |
| /* 2 is a special value indicating that there are no more direntries */ |
| ctx->pos = 2; |
| return 0; |
| } |
| |
| /* Free saved readdir() state when the directory is closed */ |
| static int ubifs_dir_release(struct inode *dir, struct file *file) |
| { |
| kfree(file->private_data); |
| file->private_data = NULL; |
| return 0; |
| } |
| |
| /** |
| * lock_2_inodes - a wrapper for locking two UBIFS inodes. |
| * @inode1: first inode |
| * @inode2: second inode |
| * |
| * We do not implement any tricks to guarantee strict lock ordering, because |
| * VFS has already done it for us on the @i_mutex. So this is just a simple |
| * wrapper function. |
| */ |
| static void lock_2_inodes(struct inode *inode1, struct inode *inode2) |
| { |
| mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1); |
| mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2); |
| } |
| |
| /** |
| * unlock_2_inodes - a wrapper for unlocking two UBIFS inodes. |
| * @inode1: first inode |
| * @inode2: second inode |
| */ |
| static void unlock_2_inodes(struct inode *inode1, struct inode *inode2) |
| { |
| mutex_unlock(&ubifs_inode(inode2)->ui_mutex); |
| mutex_unlock(&ubifs_inode(inode1)->ui_mutex); |
| } |
| |
| static int ubifs_link(struct dentry *old_dentry, struct inode *dir, |
| struct dentry *dentry) |
| { |
| struct ubifs_info *c = dir->i_sb->s_fs_info; |
| struct inode *inode = old_dentry->d_inode; |
| struct ubifs_inode *ui = ubifs_inode(inode); |
| struct ubifs_inode *dir_ui = ubifs_inode(dir); |
| int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len); |
| struct ubifs_budget_req req = { .new_dent = 1, .dirtied_ino = 2, |
| .dirtied_ino_d = ALIGN(ui->data_len, 8) }; |
| |
| /* |
| * Budget request settings: new direntry, changing the target inode, |
| * changing the parent inode. |
| */ |
| |
| dbg_gen("dent '%pd' to ino %lu (nlink %d) in dir ino %lu", |
| dentry, inode->i_ino, |
| inode->i_nlink, dir->i_ino); |
| ubifs_assert(mutex_is_locked(&dir->i_mutex)); |
| ubifs_assert(mutex_is_locked(&inode->i_mutex)); |
| |
| err = dbg_check_synced_i_size(c, inode); |
| if (err) |
| return err; |
| |
| err = ubifs_budget_space(c, &req); |
| if (err) |
| return err; |
| |
| lock_2_inodes(dir, inode); |
| inc_nlink(inode); |
| ihold(inode); |
| inode->i_ctime = ubifs_current_time(inode); |
| dir->i_size += sz_change; |
| dir_ui->ui_size = dir->i_size; |
| dir->i_mtime = dir->i_ctime = inode->i_ctime; |
| err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0); |
| if (err) |
| goto out_cancel; |
| unlock_2_inodes(dir, inode); |
| |
| ubifs_release_budget(c, &req); |
| d_instantiate(dentry, inode); |
| return 0; |
| |
| out_cancel: |
| dir->i_size -= sz_change; |
| dir_ui->ui_size = dir->i_size; |
| drop_nlink(inode); |
| unlock_2_inodes(dir, inode); |
| ubifs_release_budget(c, &req); |
| iput(inode); |
| return err; |
| } |
| |
| static int ubifs_unlink(struct inode *dir, struct dentry *dentry) |
| { |
| struct ubifs_info *c = dir->i_sb->s_fs_info; |
| struct inode *inode = dentry->d_inode; |
| struct ubifs_inode *dir_ui = ubifs_inode(dir); |
| int sz_change = CALC_DENT_SIZE(dentry->d_name.len); |
| int err, budgeted = 1; |
| struct ubifs_budget_req req = { .mod_dent = 1, .dirtied_ino = 2 }; |
| unsigned int saved_nlink = inode->i_nlink; |
| |
| /* |
| * Budget request settings: deletion direntry, deletion inode (+1 for |
| * @dirtied_ino), changing the parent directory inode. If budgeting |
| * fails, go ahead anyway because we have extra space reserved for |
| * deletions. |
| */ |
| |
| dbg_gen("dent '%pd' from ino %lu (nlink %d) in dir ino %lu", |
| dentry, inode->i_ino, |
| inode->i_nlink, dir->i_ino); |
| ubifs_assert(mutex_is_locked(&dir->i_mutex)); |
| ubifs_assert(mutex_is_locked(&inode->i_mutex)); |
| err = dbg_check_synced_i_size(c, inode); |
| if (err) |
| return err; |
| |
| err = ubifs_budget_space(c, &req); |
| if (err) { |
| if (err != -ENOSPC) |
| return err; |
| budgeted = 0; |
| } |
| |
| lock_2_inodes(dir, inode); |
| inode->i_ctime = ubifs_current_time(dir); |
| drop_nlink(inode); |
| dir->i_size -= sz_change; |
| dir_ui->ui_size = dir->i_size; |
| dir->i_mtime = dir->i_ctime = inode->i_ctime; |
| err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 1, 0); |
| if (err) |
| goto out_cancel; |
| unlock_2_inodes(dir, inode); |
| |
| if (budgeted) |
| ubifs_release_budget(c, &req); |
| else { |
| /* We've deleted something - clean the "no space" flags */ |
| c->bi.nospace = c->bi.nospace_rp = 0; |
| smp_wmb(); |
| } |
| return 0; |
| |
| out_cancel: |
| dir->i_size += sz_change; |
| dir_ui->ui_size = dir->i_size; |
| set_nlink(inode, saved_nlink); |
| unlock_2_inodes(dir, inode); |
| if (budgeted) |
| ubifs_release_budget(c, &req); |
| return err; |
| } |
| |
| /** |
| * check_dir_empty - check if a directory is empty or not. |
| * @c: UBIFS file-system description object |
| * @dir: VFS inode object of the directory to check |
| * |
| * This function checks if directory @dir is empty. Returns zero if the |
| * directory is empty, %-ENOTEMPTY if it is not, and other negative error codes |
| * in case of of errors. |
| */ |
| static int check_dir_empty(struct ubifs_info *c, struct inode *dir) |
| { |
| struct qstr nm = { .name = NULL }; |
| struct ubifs_dent_node *dent; |
| union ubifs_key key; |
| int err; |
| |
| lowest_dent_key(c, &key, dir->i_ino); |
| dent = ubifs_tnc_next_ent(c, &key, &nm); |
| if (IS_ERR(dent)) { |
| err = PTR_ERR(dent); |
| if (err == -ENOENT) |
| err = 0; |
| } else { |
| kfree(dent); |
| err = -ENOTEMPTY; |
| } |
| return err; |
| } |
| |
| static int ubifs_rmdir(struct inode *dir, struct dentry *dentry) |
| { |
| struct ubifs_info *c = dir->i_sb->s_fs_info; |
| struct inode *inode = dentry->d_inode; |
| int sz_change = CALC_DENT_SIZE(dentry->d_name.len); |
| int err, budgeted = 1; |
| struct ubifs_inode *dir_ui = ubifs_inode(dir); |
| struct ubifs_budget_req req = { .mod_dent = 1, .dirtied_ino = 2 }; |
| |
| /* |
| * Budget request settings: deletion direntry, deletion inode and |
| * changing the parent inode. If budgeting fails, go ahead anyway |
| * because we have extra space reserved for deletions. |
| */ |
| |
| dbg_gen("directory '%pd', ino %lu in dir ino %lu", dentry, |
| inode->i_ino, dir->i_ino); |
| ubifs_assert(mutex_is_locked(&dir->i_mutex)); |
| ubifs_assert(mutex_is_locked(&inode->i_mutex)); |
| err = check_dir_empty(c, dentry->d_inode); |
| if (err) |
| return err; |
| |
| err = ubifs_budget_space(c, &req); |
| if (err) { |
| if (err != -ENOSPC) |
| return err; |
| budgeted = 0; |
| } |
| |
| lock_2_inodes(dir, inode); |
| inode->i_ctime = ubifs_current_time(dir); |
| clear_nlink(inode); |
| drop_nlink(dir); |
| dir->i_size -= sz_change; |
| dir_ui->ui_size = dir->i_size; |
| dir->i_mtime = dir->i_ctime = inode->i_ctime; |
| err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 1, 0); |
| if (err) |
| goto out_cancel; |
| unlock_2_inodes(dir, inode); |
| |
| if (budgeted) |
| ubifs_release_budget(c, &req); |
| else { |
| /* We've deleted something - clean the "no space" flags */ |
| c->bi.nospace = c->bi.nospace_rp = 0; |
| smp_wmb(); |
| } |
| return 0; |
| |
| out_cancel: |
| dir->i_size += sz_change; |
| dir_ui->ui_size = dir->i_size; |
| inc_nlink(dir); |
| set_nlink(inode, 2); |
| unlock_2_inodes(dir, inode); |
| if (budgeted) |
| ubifs_release_budget(c, &req); |
| return err; |
| } |
| |
| static int ubifs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode) |
| { |
| struct inode *inode; |
| struct ubifs_inode *dir_ui = ubifs_inode(dir); |
| struct ubifs_info *c = dir->i_sb->s_fs_info; |
| int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len); |
| struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1 }; |
| |
| /* |
| * Budget request settings: new inode, new direntry and changing parent |
| * directory inode. |
| */ |
| |
| dbg_gen("dent '%pd', mode %#hx in dir ino %lu", |
| dentry, mode, dir->i_ino); |
| |
| err = ubifs_budget_space(c, &req); |
| if (err) |
| return err; |
| |
| inode = ubifs_new_inode(c, dir, S_IFDIR | mode); |
| if (IS_ERR(inode)) { |
| err = PTR_ERR(inode); |
| goto out_budg; |
| } |
| |
| err = ubifs_init_security(dir, inode, &dentry->d_name); |
| if (err) |
| goto out_cancel; |
| |
| mutex_lock(&dir_ui->ui_mutex); |
| insert_inode_hash(inode); |
| inc_nlink(inode); |
| inc_nlink(dir); |
| dir->i_size += sz_change; |
| dir_ui->ui_size = dir->i_size; |
| dir->i_mtime = dir->i_ctime = inode->i_ctime; |
| err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0); |
| if (err) { |
| ubifs_err("cannot create directory, error %d", err); |
| goto out_cancel; |
| } |
| mutex_unlock(&dir_ui->ui_mutex); |
| |
| ubifs_release_budget(c, &req); |
| d_instantiate(dentry, inode); |
| return 0; |
| |
| out_cancel: |
| dir->i_size -= sz_change; |
| dir_ui->ui_size = dir->i_size; |
| drop_nlink(dir); |
| mutex_unlock(&dir_ui->ui_mutex); |
| make_bad_inode(inode); |
| iput(inode); |
| out_budg: |
| ubifs_release_budget(c, &req); |
| return err; |
| } |
| |
| static int ubifs_mknod(struct inode *dir, struct dentry *dentry, |
| umode_t mode, dev_t rdev) |
| { |
| struct inode *inode; |
| struct ubifs_inode *ui; |
| struct ubifs_inode *dir_ui = ubifs_inode(dir); |
| struct ubifs_info *c = dir->i_sb->s_fs_info; |
| union ubifs_dev_desc *dev = NULL; |
| int sz_change = CALC_DENT_SIZE(dentry->d_name.len); |
| int err, devlen = 0; |
| struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1, |
| .new_ino_d = ALIGN(devlen, 8), |
| .dirtied_ino = 1 }; |
| |
| /* |
| * Budget request settings: new inode, new direntry and changing parent |
| * directory inode. |
| */ |
| |
| dbg_gen("dent '%pd' in dir ino %lu", dentry, dir->i_ino); |
| |
| if (!new_valid_dev(rdev)) |
| return -EINVAL; |
| |
| if (S_ISBLK(mode) || S_ISCHR(mode)) { |
| dev = kmalloc(sizeof(union ubifs_dev_desc), GFP_NOFS); |
| if (!dev) |
| return -ENOMEM; |
| devlen = ubifs_encode_dev(dev, rdev); |
| } |
| |
| err = ubifs_budget_space(c, &req); |
| if (err) { |
| kfree(dev); |
| return err; |
| } |
| |
| inode = ubifs_new_inode(c, dir, mode); |
| if (IS_ERR(inode)) { |
| kfree(dev); |
| err = PTR_ERR(inode); |
| goto out_budg; |
| } |
| |
| init_special_inode(inode, inode->i_mode, rdev); |
| inode->i_size = ubifs_inode(inode)->ui_size = devlen; |
| ui = ubifs_inode(inode); |
| ui->data = dev; |
| ui->data_len = devlen; |
| |
| err = ubifs_init_security(dir, inode, &dentry->d_name); |
| if (err) |
| goto out_cancel; |
| |
| mutex_lock(&dir_ui->ui_mutex); |
| dir->i_size += sz_change; |
| dir_ui->ui_size = dir->i_size; |
| dir->i_mtime = dir->i_ctime = inode->i_ctime; |
| err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0); |
| if (err) |
| goto out_cancel; |
| mutex_unlock(&dir_ui->ui_mutex); |
| |
| ubifs_release_budget(c, &req); |
| insert_inode_hash(inode); |
| d_instantiate(dentry, inode); |
| return 0; |
| |
| out_cancel: |
| dir->i_size -= sz_change; |
| dir_ui->ui_size = dir->i_size; |
| mutex_unlock(&dir_ui->ui_mutex); |
| make_bad_inode(inode); |
| iput(inode); |
| out_budg: |
| ubifs_release_budget(c, &req); |
| return err; |
| } |
| |
| static int ubifs_symlink(struct inode *dir, struct dentry *dentry, |
| const char *symname) |
| { |
| struct inode *inode; |
| struct ubifs_inode *ui; |
| struct ubifs_inode *dir_ui = ubifs_inode(dir); |
| struct ubifs_info *c = dir->i_sb->s_fs_info; |
| int err, len = strlen(symname); |
| int sz_change = CALC_DENT_SIZE(dentry->d_name.len); |
| struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1, |
| .new_ino_d = ALIGN(len, 8), |
| .dirtied_ino = 1 }; |
| |
| /* |
| * Budget request settings: new inode, new direntry and changing parent |
| * directory inode. |
| */ |
| |
| dbg_gen("dent '%pd', target '%s' in dir ino %lu", dentry, |
| symname, dir->i_ino); |
| |
| if (len > UBIFS_MAX_INO_DATA) |
| return -ENAMETOOLONG; |
| |
| err = ubifs_budget_space(c, &req); |
| if (err) |
| return err; |
| |
| inode = ubifs_new_inode(c, dir, S_IFLNK | S_IRWXUGO); |
| if (IS_ERR(inode)) { |
| err = PTR_ERR(inode); |
| goto out_budg; |
| } |
| |
| ui = ubifs_inode(inode); |
| ui->data = kmalloc(len + 1, GFP_NOFS); |
| if (!ui->data) { |
| err = -ENOMEM; |
| goto out_inode; |
| } |
| |
| memcpy(ui->data, symname, len); |
| ((char *)ui->data)[len] = '\0'; |
| /* |
| * The terminating zero byte is not written to the flash media and it |
| * is put just to make later in-memory string processing simpler. Thus, |
| * data length is @len, not @len + %1. |
| */ |
| ui->data_len = len; |
| inode->i_size = ubifs_inode(inode)->ui_size = len; |
| |
| err = ubifs_init_security(dir, inode, &dentry->d_name); |
| if (err) |
| goto out_cancel; |
| |
| mutex_lock(&dir_ui->ui_mutex); |
| dir->i_size += sz_change; |
| dir_ui->ui_size = dir->i_size; |
| dir->i_mtime = dir->i_ctime = inode->i_ctime; |
| err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0); |
| if (err) |
| goto out_cancel; |
| mutex_unlock(&dir_ui->ui_mutex); |
| |
| ubifs_release_budget(c, &req); |
| insert_inode_hash(inode); |
| d_instantiate(dentry, inode); |
| return 0; |
| |
| out_cancel: |
| dir->i_size -= sz_change; |
| dir_ui->ui_size = dir->i_size; |
| mutex_unlock(&dir_ui->ui_mutex); |
| out_inode: |
| make_bad_inode(inode); |
| iput(inode); |
| out_budg: |
| ubifs_release_budget(c, &req); |
| return err; |
| } |
| |
| /** |
| * lock_3_inodes - a wrapper for locking three UBIFS inodes. |
| * @inode1: first inode |
| * @inode2: second inode |
| * @inode3: third inode |
| * |
| * This function is used for 'ubifs_rename()' and @inode1 may be the same as |
| * @inode2 whereas @inode3 may be %NULL. |
| * |
| * We do not implement any tricks to guarantee strict lock ordering, because |
| * VFS has already done it for us on the @i_mutex. So this is just a simple |
| * wrapper function. |
| */ |
| static void lock_3_inodes(struct inode *inode1, struct inode *inode2, |
| struct inode *inode3) |
| { |
| mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1); |
| if (inode2 != inode1) |
| mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2); |
| if (inode3) |
| mutex_lock_nested(&ubifs_inode(inode3)->ui_mutex, WB_MUTEX_3); |
| } |
| |
| /** |
| * unlock_3_inodes - a wrapper for unlocking three UBIFS inodes for rename. |
| * @inode1: first inode |
| * @inode2: second inode |
| * @inode3: third inode |
| */ |
| static void unlock_3_inodes(struct inode *inode1, struct inode *inode2, |
| struct inode *inode3) |
| { |
| if (inode3) |
| mutex_unlock(&ubifs_inode(inode3)->ui_mutex); |
| if (inode1 != inode2) |
| mutex_unlock(&ubifs_inode(inode2)->ui_mutex); |
| mutex_unlock(&ubifs_inode(inode1)->ui_mutex); |
| } |
| |
| static int ubifs_rename(struct inode *old_dir, struct dentry *old_dentry, |
| struct inode *new_dir, struct dentry *new_dentry) |
| { |
| struct ubifs_info *c = old_dir->i_sb->s_fs_info; |
| struct inode *old_inode = old_dentry->d_inode; |
| struct inode *new_inode = new_dentry->d_inode; |
| struct ubifs_inode *old_inode_ui = ubifs_inode(old_inode); |
| int err, release, sync = 0, move = (new_dir != old_dir); |
| int is_dir = S_ISDIR(old_inode->i_mode); |
| int unlink = !!new_inode; |
| int new_sz = CALC_DENT_SIZE(new_dentry->d_name.len); |
| int old_sz = CALC_DENT_SIZE(old_dentry->d_name.len); |
| struct ubifs_budget_req req = { .new_dent = 1, .mod_dent = 1, |
| .dirtied_ino = 3 }; |
| struct ubifs_budget_req ino_req = { .dirtied_ino = 1, |
| .dirtied_ino_d = ALIGN(old_inode_ui->data_len, 8) }; |
| struct timespec time; |
| unsigned int uninitialized_var(saved_nlink); |
| |
| /* |
| * Budget request settings: deletion direntry, new direntry, removing |
| * the old inode, and changing old and new parent directory inodes. |
| * |
| * However, this operation also marks the target inode as dirty and |
| * does not write it, so we allocate budget for the target inode |
| * separately. |
| */ |
| |
| dbg_gen("dent '%pd' ino %lu in dir ino %lu to dent '%pd' in dir ino %lu", |
| old_dentry, old_inode->i_ino, old_dir->i_ino, |
| new_dentry, new_dir->i_ino); |
| ubifs_assert(mutex_is_locked(&old_dir->i_mutex)); |
| ubifs_assert(mutex_is_locked(&new_dir->i_mutex)); |
| if (unlink) |
| ubifs_assert(mutex_is_locked(&new_inode->i_mutex)); |
| |
| |
| if (unlink && is_dir) { |
| err = check_dir_empty(c, new_inode); |
| if (err) |
| return err; |
| } |
| |
| err = ubifs_budget_space(c, &req); |
| if (err) |
| return err; |
| err = ubifs_budget_space(c, &ino_req); |
| if (err) { |
| ubifs_release_budget(c, &req); |
| return err; |
| } |
| |
| lock_3_inodes(old_dir, new_dir, new_inode); |
| |
| /* |
| * Like most other Unix systems, set the @i_ctime for inodes on a |
| * rename. |
| */ |
| time = ubifs_current_time(old_dir); |
| old_inode->i_ctime = time; |
| |
| /* We must adjust parent link count when renaming directories */ |
| if (is_dir) { |
| if (move) { |
| /* |
| * @old_dir loses a link because we are moving |
| * @old_inode to a different directory. |
| */ |
| drop_nlink(old_dir); |
| /* |
| * @new_dir only gains a link if we are not also |
| * overwriting an existing directory. |
| */ |
| if (!unlink) |
| inc_nlink(new_dir); |
| } else { |
| /* |
| * @old_inode is not moving to a different directory, |
| * but @old_dir still loses a link if we are |
| * overwriting an existing directory. |
| */ |
| if (unlink) |
| drop_nlink(old_dir); |
| } |
| } |
| |
| old_dir->i_size -= old_sz; |
| ubifs_inode(old_dir)->ui_size = old_dir->i_size; |
| old_dir->i_mtime = old_dir->i_ctime = time; |
| new_dir->i_mtime = new_dir->i_ctime = time; |
| |
| /* |
| * And finally, if we unlinked a direntry which happened to have the |
| * same name as the moved direntry, we have to decrement @i_nlink of |
| * the unlinked inode and change its ctime. |
| */ |
| if (unlink) { |
| /* |
| * Directories cannot have hard-links, so if this is a |
| * directory, just clear @i_nlink. |
| */ |
| saved_nlink = new_inode->i_nlink; |
| if (is_dir) |
| clear_nlink(new_inode); |
| else |
| drop_nlink(new_inode); |
| new_inode->i_ctime = time; |
| } else { |
| new_dir->i_size += new_sz; |
| ubifs_inode(new_dir)->ui_size = new_dir->i_size; |
| } |
| |
| /* |
| * Do not ask 'ubifs_jnl_rename()' to flush write-buffer if @old_inode |
| * is dirty, because this will be done later on at the end of |
| * 'ubifs_rename()'. |
| */ |
| if (IS_SYNC(old_inode)) { |
| sync = IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir); |
| if (unlink && IS_SYNC(new_inode)) |
| sync = 1; |
| } |
| err = ubifs_jnl_rename(c, old_dir, old_dentry, new_dir, new_dentry, |
| sync); |
| if (err) |
| goto out_cancel; |
| |
| unlock_3_inodes(old_dir, new_dir, new_inode); |
| ubifs_release_budget(c, &req); |
| |
| mutex_lock(&old_inode_ui->ui_mutex); |
| release = old_inode_ui->dirty; |
| mark_inode_dirty_sync(old_inode); |
| mutex_unlock(&old_inode_ui->ui_mutex); |
| |
| if (release) |
| ubifs_release_budget(c, &ino_req); |
| if (IS_SYNC(old_inode)) |
| err = old_inode->i_sb->s_op->write_inode(old_inode, NULL); |
| return err; |
| |
| out_cancel: |
| if (unlink) { |
| set_nlink(new_inode, saved_nlink); |
| } else { |
| new_dir->i_size -= new_sz; |
| ubifs_inode(new_dir)->ui_size = new_dir->i_size; |
| } |
| old_dir->i_size += old_sz; |
| ubifs_inode(old_dir)->ui_size = old_dir->i_size; |
| if (is_dir) { |
| if (move) { |
| inc_nlink(old_dir); |
| if (!unlink) |
| drop_nlink(new_dir); |
| } else { |
| if (unlink) |
| inc_nlink(old_dir); |
| } |
| } |
| unlock_3_inodes(old_dir, new_dir, new_inode); |
| ubifs_release_budget(c, &ino_req); |
| ubifs_release_budget(c, &req); |
| return err; |
| } |
| |
| int ubifs_getattr(struct vfsmount *mnt, struct dentry *dentry, |
| struct kstat *stat) |
| { |
| loff_t size; |
| struct inode *inode = dentry->d_inode; |
| struct ubifs_inode *ui = ubifs_inode(inode); |
| |
| mutex_lock(&ui->ui_mutex); |
| generic_fillattr(inode, stat); |
| stat->blksize = UBIFS_BLOCK_SIZE; |
| stat->size = ui->ui_size; |
| |
| /* |
| * Unfortunately, the 'stat()' system call was designed for block |
| * device based file systems, and it is not appropriate for UBIFS, |
| * because UBIFS does not have notion of "block". For example, it is |
| * difficult to tell how many block a directory takes - it actually |
| * takes less than 300 bytes, but we have to round it to block size, |
| * which introduces large mistake. This makes utilities like 'du' to |
| * report completely senseless numbers. This is the reason why UBIFS |
| * goes the same way as JFFS2 - it reports zero blocks for everything |
| * but regular files, which makes more sense than reporting completely |
| * wrong sizes. |
| */ |
| if (S_ISREG(inode->i_mode)) { |
| size = ui->xattr_size; |
| size += stat->size; |
| size = ALIGN(size, UBIFS_BLOCK_SIZE); |
| /* |
| * Note, user-space expects 512-byte blocks count irrespectively |
| * of what was reported in @stat->size. |
| */ |
| stat->blocks = size >> 9; |
| } else |
| stat->blocks = 0; |
| mutex_unlock(&ui->ui_mutex); |
| return 0; |
| } |
| |
| const struct inode_operations ubifs_dir_inode_operations = { |
| .lookup = ubifs_lookup, |
| .create = ubifs_create, |
| .link = ubifs_link, |
| .symlink = ubifs_symlink, |
| .unlink = ubifs_unlink, |
| .mkdir = ubifs_mkdir, |
| .rmdir = ubifs_rmdir, |
| .mknod = ubifs_mknod, |
| .rename = ubifs_rename, |
| .setattr = ubifs_setattr, |
| .getattr = ubifs_getattr, |
| .setxattr = ubifs_setxattr, |
| .getxattr = ubifs_getxattr, |
| .listxattr = ubifs_listxattr, |
| .removexattr = ubifs_removexattr, |
| }; |
| |
| const struct file_operations ubifs_dir_operations = { |
| .llseek = generic_file_llseek, |
| .release = ubifs_dir_release, |
| .read = generic_read_dir, |
| .iterate = ubifs_readdir, |
| .fsync = ubifs_fsync, |
| .unlocked_ioctl = ubifs_ioctl, |
| #ifdef CONFIG_COMPAT |
| .compat_ioctl = ubifs_compat_ioctl, |
| #endif |
| }; |