| /* |
| * This file is part of wl1271 |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #ifndef __CONF_H__ |
| #define __CONF_H__ |
| |
| enum { |
| CONF_HW_BIT_RATE_1MBPS = BIT(0), |
| CONF_HW_BIT_RATE_2MBPS = BIT(1), |
| CONF_HW_BIT_RATE_5_5MBPS = BIT(2), |
| CONF_HW_BIT_RATE_6MBPS = BIT(3), |
| CONF_HW_BIT_RATE_9MBPS = BIT(4), |
| CONF_HW_BIT_RATE_11MBPS = BIT(5), |
| CONF_HW_BIT_RATE_12MBPS = BIT(6), |
| CONF_HW_BIT_RATE_18MBPS = BIT(7), |
| CONF_HW_BIT_RATE_22MBPS = BIT(8), |
| CONF_HW_BIT_RATE_24MBPS = BIT(9), |
| CONF_HW_BIT_RATE_36MBPS = BIT(10), |
| CONF_HW_BIT_RATE_48MBPS = BIT(11), |
| CONF_HW_BIT_RATE_54MBPS = BIT(12), |
| CONF_HW_BIT_RATE_MCS_0 = BIT(13), |
| CONF_HW_BIT_RATE_MCS_1 = BIT(14), |
| CONF_HW_BIT_RATE_MCS_2 = BIT(15), |
| CONF_HW_BIT_RATE_MCS_3 = BIT(16), |
| CONF_HW_BIT_RATE_MCS_4 = BIT(17), |
| CONF_HW_BIT_RATE_MCS_5 = BIT(18), |
| CONF_HW_BIT_RATE_MCS_6 = BIT(19), |
| CONF_HW_BIT_RATE_MCS_7 = BIT(20) |
| }; |
| |
| enum { |
| CONF_HW_RATE_INDEX_1MBPS = 0, |
| CONF_HW_RATE_INDEX_2MBPS = 1, |
| CONF_HW_RATE_INDEX_5_5MBPS = 2, |
| CONF_HW_RATE_INDEX_6MBPS = 3, |
| CONF_HW_RATE_INDEX_9MBPS = 4, |
| CONF_HW_RATE_INDEX_11MBPS = 5, |
| CONF_HW_RATE_INDEX_12MBPS = 6, |
| CONF_HW_RATE_INDEX_18MBPS = 7, |
| CONF_HW_RATE_INDEX_22MBPS = 8, |
| CONF_HW_RATE_INDEX_24MBPS = 9, |
| CONF_HW_RATE_INDEX_36MBPS = 10, |
| CONF_HW_RATE_INDEX_48MBPS = 11, |
| CONF_HW_RATE_INDEX_54MBPS = 12, |
| CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, |
| }; |
| |
| enum { |
| CONF_HW_RXTX_RATE_MCS7 = 0, |
| CONF_HW_RXTX_RATE_MCS6, |
| CONF_HW_RXTX_RATE_MCS5, |
| CONF_HW_RXTX_RATE_MCS4, |
| CONF_HW_RXTX_RATE_MCS3, |
| CONF_HW_RXTX_RATE_MCS2, |
| CONF_HW_RXTX_RATE_MCS1, |
| CONF_HW_RXTX_RATE_MCS0, |
| CONF_HW_RXTX_RATE_54, |
| CONF_HW_RXTX_RATE_48, |
| CONF_HW_RXTX_RATE_36, |
| CONF_HW_RXTX_RATE_24, |
| CONF_HW_RXTX_RATE_22, |
| CONF_HW_RXTX_RATE_18, |
| CONF_HW_RXTX_RATE_12, |
| CONF_HW_RXTX_RATE_11, |
| CONF_HW_RXTX_RATE_9, |
| CONF_HW_RXTX_RATE_6, |
| CONF_HW_RXTX_RATE_5_5, |
| CONF_HW_RXTX_RATE_2, |
| CONF_HW_RXTX_RATE_1, |
| CONF_HW_RXTX_RATE_MAX, |
| CONF_HW_RXTX_RATE_UNSUPPORTED = 0xff |
| }; |
| |
| enum { |
| CONF_SG_DISABLE = 0, |
| CONF_SG_PROTECTIVE, |
| CONF_SG_OPPORTUNISTIC |
| }; |
| |
| enum { |
| /* |
| * PER threshold in PPM of the BT voice |
| * |
| * Range: 0 - 10000000 |
| */ |
| CONF_SG_BT_PER_THRESHOLD = 0, |
| |
| /* |
| * Number of consequent RX_ACTIVE activities to override BT voice |
| * frames to ensure WLAN connection |
| * |
| * Range: 0 - 100 |
| */ |
| CONF_SG_HV3_MAX_OVERRIDE, |
| |
| /* |
| * Defines the PER threshold of the BT voice |
| * |
| * Range: 0 - 65000 |
| */ |
| CONF_SG_BT_NFS_SAMPLE_INTERVAL, |
| |
| /* |
| * Defines the load ratio of BT |
| * |
| * Range: 0 - 100 (%) |
| */ |
| CONF_SG_BT_LOAD_RATIO, |
| |
| /* |
| * Defines whether the SG will force WLAN host to enter/exit PSM |
| * |
| * Range: 1 - SG can force, 0 - host handles PSM |
| */ |
| CONF_SG_AUTO_PS_MODE, |
| |
| /* |
| * Compensation percentage of probe requests when scan initiated |
| * during BT voice/ACL link. |
| * |
| * Range: 0 - 255 (%) |
| */ |
| CONF_SG_AUTO_SCAN_PROBE_REQ, |
| |
| /* |
| * Compensation percentage of probe requests when active scan initiated |
| * during BT voice |
| * |
| * Range: 0 - 255 (%) |
| */ |
| CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, |
| |
| /* |
| * Defines antenna configuration (single/dual antenna) |
| * |
| * Range: 0 - single antenna, 1 - dual antenna |
| */ |
| CONF_SG_ANTENNA_CONFIGURATION, |
| |
| /* |
| * The threshold (percent) of max consequtive beacon misses before |
| * increasing priority of beacon reception. |
| * |
| * Range: 0 - 100 (%) |
| */ |
| CONF_SG_BEACON_MISS_PERCENT, |
| |
| /* |
| * The rate threshold below which receiving a data frame from the AP |
| * will increase the priority of the data frame above BT traffic. |
| * |
| * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54 |
| */ |
| CONF_SG_RATE_ADAPT_THRESH, |
| |
| /* |
| * Not used currently. |
| * |
| * Range: 0 |
| */ |
| CONF_SG_RATE_ADAPT_SNR, |
| |
| /* |
| * Configure the min and max time BT gains the antenna |
| * in WLAN PSM / BT master basic rate |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR, |
| CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR, |
| |
| /* |
| * The time after it expires no new WLAN trigger frame is trasmitted |
| * in WLAN PSM / BT master basic rate |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR, |
| |
| /* |
| * Configure the min and max time BT gains the antenna |
| * in WLAN PSM / BT slave basic rate |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR, |
| CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR, |
| |
| /* |
| * The time after it expires no new WLAN trigger frame is trasmitted |
| * in WLAN PSM / BT slave basic rate |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR, |
| |
| /* |
| * Configure the min and max time BT gains the antenna |
| * in WLAN PSM / BT master EDR |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR, |
| CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR, |
| |
| /* |
| * The time after it expires no new WLAN trigger frame is trasmitted |
| * in WLAN PSM / BT master EDR |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR, |
| |
| /* |
| * Configure the min and max time BT gains the antenna |
| * in WLAN PSM / BT slave EDR |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR, |
| CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR, |
| |
| /* |
| * The time after it expires no new WLAN trigger frame is trasmitted |
| * in WLAN PSM / BT slave EDR |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR, |
| |
| /* |
| * RX guard time before the beginning of a new BT voice frame during |
| * which no new WLAN trigger frame is transmitted. |
| * |
| * Range: 0 - 100000 (us) |
| */ |
| CONF_SG_RXT, |
| |
| /* |
| * TX guard time before the beginning of a new BT voice frame during |
| * which no new WLAN frame is transmitted. |
| * |
| * Range: 0 - 100000 (us) |
| */ |
| |
| CONF_SG_TXT, |
| |
| /* |
| * Enable adaptive RXT/TXT algorithm. If disabled, the host values |
| * will be utilized. |
| * |
| * Range: 0 - disable, 1 - enable |
| */ |
| CONF_SG_ADAPTIVE_RXT_TXT, |
| |
| /* |
| * The used WLAN legacy service period during active BT ACL link |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_PS_POLL_TIMEOUT, |
| |
| /* |
| * The used WLAN UPSD service period during active BT ACL link |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_UPSD_TIMEOUT, |
| |
| /* |
| * Configure the min and max time BT gains the antenna |
| * in WLAN Active / BT master EDR |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR, |
| CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR, |
| |
| /* |
| * The maximum time WLAN can gain the antenna for |
| * in WLAN Active / BT master EDR |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR, |
| |
| /* |
| * Configure the min and max time BT gains the antenna |
| * in WLAN Active / BT slave EDR |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR, |
| CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR, |
| |
| /* |
| * The maximum time WLAN can gain the antenna for |
| * in WLAN Active / BT slave EDR |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR, |
| |
| /* |
| * Configure the min and max time BT gains the antenna |
| * in WLAN Active / BT basic rate |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR, |
| CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR, |
| |
| /* |
| * The maximum time WLAN can gain the antenna for |
| * in WLAN Active / BT basic rate |
| * |
| * Range: 0 - 255 (ms) |
| */ |
| CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR, |
| |
| /* |
| * Compensation percentage of WLAN passive scan window if initiated |
| * during BT voice |
| * |
| * Range: 0 - 1000 (%) |
| */ |
| CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, |
| |
| /* |
| * Compensation percentage of WLAN passive scan window if initiated |
| * during BT A2DP |
| * |
| * Range: 0 - 1000 (%) |
| */ |
| CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP, |
| |
| /* |
| * Fixed time ensured for BT traffic to gain the antenna during WLAN |
| * passive scan. |
| * |
| * Range: 0 - 1000 ms |
| */ |
| CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME, |
| |
| /* |
| * Fixed time ensured for WLAN traffic to gain the antenna during WLAN |
| * passive scan. |
| * |
| * Range: 0 - 1000 ms |
| */ |
| CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME, |
| |
| /* |
| * Number of consequent BT voice frames not interrupted by WLAN |
| * |
| * Range: 0 - 100 |
| */ |
| CONF_SG_HV3_MAX_SERVED, |
| |
| /* |
| * Protection time of the DHCP procedure. |
| * |
| * Range: 0 - 100000 (ms) |
| */ |
| CONF_SG_DHCP_TIME, |
| |
| /* |
| * Compensation percentage of WLAN active scan window if initiated |
| * during BT A2DP |
| * |
| * Range: 0 - 1000 (%) |
| */ |
| CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP, |
| CONF_SG_TEMP_PARAM_1, |
| CONF_SG_TEMP_PARAM_2, |
| CONF_SG_TEMP_PARAM_3, |
| CONF_SG_TEMP_PARAM_4, |
| CONF_SG_TEMP_PARAM_5, |
| CONF_SG_PARAMS_MAX, |
| CONF_SG_PARAMS_ALL = 0xff |
| }; |
| |
| struct conf_sg_settings { |
| u32 params[CONF_SG_PARAMS_MAX]; |
| u8 state; |
| }; |
| |
| enum conf_rx_queue_type { |
| CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */ |
| CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */ |
| }; |
| |
| struct conf_rx_settings { |
| /* |
| * The maximum amount of time, in TU, before the |
| * firmware discards the MSDU. |
| * |
| * Range: 0 - 0xFFFFFFFF |
| */ |
| u32 rx_msdu_life_time; |
| |
| /* |
| * Packet detection threshold in the PHY. |
| * |
| * FIXME: details unknown. |
| */ |
| u32 packet_detection_threshold; |
| |
| /* |
| * The longest time the STA will wait to receive traffic from the AP |
| * after a PS-poll has been transmitted. |
| * |
| * Range: 0 - 200000 |
| */ |
| u16 ps_poll_timeout; |
| /* |
| * The longest time the STA will wait to receive traffic from the AP |
| * after a frame has been sent from an UPSD enabled queue. |
| * |
| * Range: 0 - 200000 |
| */ |
| u16 upsd_timeout; |
| |
| /* |
| * The number of octets in an MPDU, below which an RTS/CTS |
| * handshake is not performed. |
| * |
| * Range: 0 - 4096 |
| */ |
| u16 rts_threshold; |
| |
| /* |
| * The RX Clear Channel Assessment threshold in the PHY |
| * (the energy threshold). |
| * |
| * Range: ENABLE_ENERGY_D == 0x140A |
| * DISABLE_ENERGY_D == 0xFFEF |
| */ |
| u16 rx_cca_threshold; |
| |
| /* |
| * Occupied Rx mem-blocks number which requires interrupting the host |
| * (0 = no buffering, 0xffff = disabled). |
| * |
| * Range: u16 |
| */ |
| u16 irq_blk_threshold; |
| |
| /* |
| * Rx packets number which requires interrupting the host |
| * (0 = no buffering). |
| * |
| * Range: u16 |
| */ |
| u16 irq_pkt_threshold; |
| |
| /* |
| * Max time in msec the FW may delay RX-Complete interrupt. |
| * |
| * Range: 1 - 100 |
| */ |
| u16 irq_timeout; |
| |
| /* |
| * The RX queue type. |
| * |
| * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY, |
| */ |
| u8 queue_type; |
| }; |
| |
| #define CONF_TX_MAX_RATE_CLASSES 8 |
| |
| #define CONF_TX_RATE_MASK_UNSPECIFIED 0 |
| #define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \ |
| CONF_HW_BIT_RATE_2MBPS) |
| #define CONF_TX_RATE_RETRY_LIMIT 10 |
| |
| /* |
| * Rates supported for data packets when operating as AP. Note the absense |
| * of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop |
| * one. The rate dropped is not mandatory under any operating mode. |
| */ |
| #define CONF_TX_AP_ENABLED_RATES (CONF_HW_BIT_RATE_1MBPS | \ |
| CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \ |
| CONF_HW_BIT_RATE_6MBPS | CONF_HW_BIT_RATE_9MBPS | \ |
| CONF_HW_BIT_RATE_11MBPS | CONF_HW_BIT_RATE_12MBPS | \ |
| CONF_HW_BIT_RATE_18MBPS | CONF_HW_BIT_RATE_24MBPS | \ |
| CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \ |
| CONF_HW_BIT_RATE_54MBPS) |
| |
| /* |
| * Default rates for management traffic when operating in AP mode. This |
| * should be configured according to the basic rate set of the AP |
| */ |
| #define CONF_TX_AP_DEFAULT_MGMT_RATES (CONF_HW_BIT_RATE_1MBPS | \ |
| CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS) |
| |
| struct conf_tx_rate_class { |
| |
| /* |
| * The rates enabled for this rate class. |
| * |
| * Range: CONF_HW_BIT_RATE_* bit mask |
| */ |
| u32 enabled_rates; |
| |
| /* |
| * The dot11 short retry limit used for TX retries. |
| * |
| * Range: u8 |
| */ |
| u8 short_retry_limit; |
| |
| /* |
| * The dot11 long retry limit used for TX retries. |
| * |
| * Range: u8 |
| */ |
| u8 long_retry_limit; |
| |
| /* |
| * Flags controlling the attributes of TX transmission. |
| * |
| * Range: bit 0: Truncate - when set, FW attempts to send a frame stop |
| * when the total valid per-rate attempts have |
| * been exhausted; otherwise transmissions |
| * will continue at the lowest available rate |
| * until the appropriate one of the |
| * short_retry_limit, long_retry_limit, |
| * dot11_max_transmit_msdu_life_time, or |
| * max_tx_life_time, is exhausted. |
| * 1: Preamble Override - indicates if the preamble type |
| * should be used in TX. |
| * 2: Preamble Type - the type of the preamble to be used by |
| * the policy (0 - long preamble, 1 - short preamble. |
| */ |
| u8 aflags; |
| }; |
| |
| #define CONF_TX_MAX_AC_COUNT 4 |
| |
| /* Slot number setting to start transmission at PIFS interval */ |
| #define CONF_TX_AIFS_PIFS 1 |
| /* Slot number setting to start transmission at DIFS interval normal |
| * DCF access */ |
| #define CONF_TX_AIFS_DIFS 2 |
| |
| |
| enum conf_tx_ac { |
| CONF_TX_AC_BE = 0, /* best effort / legacy */ |
| CONF_TX_AC_BK = 1, /* background */ |
| CONF_TX_AC_VI = 2, /* video */ |
| CONF_TX_AC_VO = 3, /* voice */ |
| CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */ |
| CONF_TX_AC_ANY_TID = 0x1f |
| }; |
| |
| struct conf_tx_ac_category { |
| /* |
| * The AC class identifier. |
| * |
| * Range: enum conf_tx_ac |
| */ |
| u8 ac; |
| |
| /* |
| * The contention window minimum size (in slots) for the access |
| * class. |
| * |
| * Range: u8 |
| */ |
| u8 cw_min; |
| |
| /* |
| * The contention window maximum size (in slots) for the access |
| * class. |
| * |
| * Range: u8 |
| */ |
| u16 cw_max; |
| |
| /* |
| * The AIF value (in slots) for the access class. |
| * |
| * Range: u8 |
| */ |
| u8 aifsn; |
| |
| /* |
| * The TX Op Limit (in microseconds) for the access class. |
| * |
| * Range: u16 |
| */ |
| u16 tx_op_limit; |
| }; |
| |
| #define CONF_TX_MAX_TID_COUNT 8 |
| |
| enum { |
| CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/ |
| CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/ |
| CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/ |
| }; |
| |
| enum { |
| CONF_PS_SCHEME_LEGACY = 0, |
| CONF_PS_SCHEME_UPSD_TRIGGER = 1, |
| CONF_PS_SCHEME_LEGACY_PSPOLL = 2, |
| CONF_PS_SCHEME_SAPSD = 3, |
| }; |
| |
| enum { |
| CONF_ACK_POLICY_LEGACY = 0, |
| CONF_ACK_POLICY_NO_ACK = 1, |
| CONF_ACK_POLICY_BLOCK = 2, |
| }; |
| |
| |
| struct conf_tx_tid { |
| u8 queue_id; |
| u8 channel_type; |
| u8 tsid; |
| u8 ps_scheme; |
| u8 ack_policy; |
| u32 apsd_conf[2]; |
| }; |
| |
| struct conf_tx_settings { |
| /* |
| * The TX ED value for TELEC Enable/Disable. |
| * |
| * Range: 0, 1 |
| */ |
| u8 tx_energy_detection; |
| |
| /* |
| * Configuration for rate classes for TX (currently only one |
| * rate class supported). Used in non-AP mode. |
| */ |
| struct conf_tx_rate_class sta_rc_conf; |
| |
| /* |
| * Configuration for access categories for TX rate control. |
| */ |
| u8 ac_conf_count; |
| struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT]; |
| |
| /* |
| * Configuration for rate classes in AP-mode. These rate classes |
| * are for the AC TX queues |
| */ |
| struct conf_tx_rate_class ap_rc_conf[CONF_TX_MAX_AC_COUNT]; |
| |
| /* |
| * Management TX rate class for AP-mode. |
| */ |
| struct conf_tx_rate_class ap_mgmt_conf; |
| |
| /* |
| * Broadcast TX rate class for AP-mode. |
| */ |
| struct conf_tx_rate_class ap_bcst_conf; |
| |
| /* |
| * AP-mode - allow this number of TX retries to a station before an |
| * event is triggered from FW. |
| */ |
| u16 ap_max_tx_retries; |
| |
| /* |
| * Configuration for TID parameters. |
| */ |
| u8 tid_conf_count; |
| struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT]; |
| |
| /* |
| * The TX fragmentation threshold. |
| * |
| * Range: u16 |
| */ |
| u16 frag_threshold; |
| |
| /* |
| * Max time in msec the FW may delay frame TX-Complete interrupt. |
| * |
| * Range: u16 |
| */ |
| u16 tx_compl_timeout; |
| |
| /* |
| * Completed TX packet count which requires to issue the TX-Complete |
| * interrupt. |
| * |
| * Range: u16 |
| */ |
| u16 tx_compl_threshold; |
| |
| /* |
| * The rate used for control messages and scanning on the 2.4GHz band |
| * |
| * Range: CONF_HW_BIT_RATE_* bit mask |
| */ |
| u32 basic_rate; |
| |
| /* |
| * The rate used for control messages and scanning on the 5GHz band |
| * |
| * Range: CONF_HW_BIT_RATE_* bit mask |
| */ |
| u32 basic_rate_5; |
| |
| /* |
| * TX retry limits for templates |
| */ |
| u8 tmpl_short_retry_limit; |
| u8 tmpl_long_retry_limit; |
| }; |
| |
| enum { |
| CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/ |
| CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/ |
| CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */ |
| CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */ |
| CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F |
| }; |
| |
| #define CONF_MAX_BCN_FILT_IE_COUNT 32 |
| |
| #define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0) |
| #define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1) |
| |
| #define CONF_BCN_IE_OUI_LEN 3 |
| #define CONF_BCN_IE_VER_LEN 2 |
| |
| struct conf_bcn_filt_rule { |
| /* |
| * IE number to which to associate a rule. |
| * |
| * Range: u8 |
| */ |
| u8 ie; |
| |
| /* |
| * Rule to associate with the specific ie. |
| * |
| * Range: CONF_BCN_RULE_PASS_ON_* |
| */ |
| u8 rule; |
| |
| /* |
| * OUI for the vendor specifie IE (221) |
| */ |
| u8 oui[CONF_BCN_IE_OUI_LEN]; |
| |
| /* |
| * Type for the vendor specifie IE (221) |
| */ |
| u8 type; |
| |
| /* |
| * Version for the vendor specifie IE (221) |
| */ |
| u8 version[CONF_BCN_IE_VER_LEN]; |
| }; |
| |
| #define CONF_MAX_RSSI_SNR_TRIGGERS 8 |
| |
| enum { |
| CONF_TRIG_METRIC_RSSI_BEACON = 0, |
| CONF_TRIG_METRIC_RSSI_DATA, |
| CONF_TRIG_METRIC_SNR_BEACON, |
| CONF_TRIG_METRIC_SNR_DATA |
| }; |
| |
| enum { |
| CONF_TRIG_EVENT_TYPE_LEVEL = 0, |
| CONF_TRIG_EVENT_TYPE_EDGE |
| }; |
| |
| enum { |
| CONF_TRIG_EVENT_DIR_LOW = 0, |
| CONF_TRIG_EVENT_DIR_HIGH, |
| CONF_TRIG_EVENT_DIR_BIDIR |
| }; |
| |
| struct conf_sig_weights { |
| |
| /* |
| * RSSI from beacons average weight. |
| * |
| * Range: u8 |
| */ |
| u8 rssi_bcn_avg_weight; |
| |
| /* |
| * RSSI from data average weight. |
| * |
| * Range: u8 |
| */ |
| u8 rssi_pkt_avg_weight; |
| |
| /* |
| * SNR from beacons average weight. |
| * |
| * Range: u8 |
| */ |
| u8 snr_bcn_avg_weight; |
| |
| /* |
| * SNR from data average weight. |
| * |
| * Range: u8 |
| */ |
| u8 snr_pkt_avg_weight; |
| }; |
| |
| enum conf_bcn_filt_mode { |
| CONF_BCN_FILT_MODE_DISABLED = 0, |
| CONF_BCN_FILT_MODE_ENABLED = 1 |
| }; |
| |
| enum conf_bet_mode { |
| CONF_BET_MODE_DISABLE = 0, |
| CONF_BET_MODE_ENABLE = 1, |
| }; |
| |
| struct conf_conn_settings { |
| /* |
| * Firmware wakeup conditions configuration. The host may set only |
| * one bit. |
| * |
| * Range: CONF_WAKE_UP_EVENT_* |
| */ |
| u8 wake_up_event; |
| |
| /* |
| * Listen interval for beacons or Dtims. |
| * |
| * Range: 0 for beacon and Dtim wakeup |
| * 1-10 for x Dtims |
| * 1-255 for x beacons |
| */ |
| u8 listen_interval; |
| |
| /* |
| * Enable or disable the beacon filtering. |
| * |
| * Range: CONF_BCN_FILT_MODE_* |
| */ |
| enum conf_bcn_filt_mode bcn_filt_mode; |
| |
| /* |
| * Configure Beacon filter pass-thru rules. |
| */ |
| u8 bcn_filt_ie_count; |
| struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT]; |
| |
| /* |
| * The number of consequtive beacons to lose, before the firmware |
| * becomes out of synch. |
| * |
| * Range: u32 |
| */ |
| u32 synch_fail_thold; |
| |
| /* |
| * After out-of-synch, the number of TU's to wait without a further |
| * received beacon (or probe response) before issuing the BSS_EVENT_LOSE |
| * event. |
| * |
| * Range: u32 |
| */ |
| u32 bss_lose_timeout; |
| |
| /* |
| * Beacon receive timeout. |
| * |
| * Range: u32 |
| */ |
| u32 beacon_rx_timeout; |
| |
| /* |
| * Broadcast receive timeout. |
| * |
| * Range: u32 |
| */ |
| u32 broadcast_timeout; |
| |
| /* |
| * Enable/disable reception of broadcast packets in power save mode |
| * |
| * Range: 1 - enable, 0 - disable |
| */ |
| u8 rx_broadcast_in_ps; |
| |
| /* |
| * Consequtive PS Poll failures before sending event to driver |
| * |
| * Range: u8 |
| */ |
| u8 ps_poll_threshold; |
| |
| /* |
| * PS Poll failure recovery ACTIVE period length |
| * |
| * Range: u32 (ms) |
| */ |
| u32 ps_poll_recovery_period; |
| |
| /* |
| * Configuration of signal average weights. |
| */ |
| struct conf_sig_weights sig_weights; |
| |
| /* |
| * Specifies if beacon early termination procedure is enabled or |
| * disabled. |
| * |
| * Range: CONF_BET_MODE_* |
| */ |
| u8 bet_enable; |
| |
| /* |
| * Specifies the maximum number of consecutive beacons that may be |
| * early terminated. After this number is reached at least one full |
| * beacon must be correctly received in FW before beacon ET |
| * resumes. |
| * |
| * Range 0 - 255 |
| */ |
| u8 bet_max_consecutive; |
| |
| /* |
| * Specifies the maximum number of times to try PSM entry if it fails |
| * (if sending the appropriate null-func message fails.) |
| * |
| * Range 0 - 255 |
| */ |
| u8 psm_entry_retries; |
| |
| /* |
| * Specifies the maximum number of times to try PSM exit if it fails |
| * (if sending the appropriate null-func message fails.) |
| * |
| * Range 0 - 255 |
| */ |
| u8 psm_exit_retries; |
| |
| /* |
| * Specifies the maximum number of times to try transmit the PSM entry |
| * null-func frame for each PSM entry attempt |
| * |
| * Range 0 - 255 |
| */ |
| u8 psm_entry_nullfunc_retries; |
| |
| /* |
| * Specifies the time to linger in active mode after successfully |
| * transmitting the PSM entry null-func frame. |
| * |
| * Range 0 - 255 TU's |
| */ |
| u8 psm_entry_hangover_period; |
| |
| /* |
| * |
| * Specifies the interval of the connection keep-alive null-func |
| * frame in ms. |
| * |
| * Range: 1000 - 3600000 |
| */ |
| u32 keep_alive_interval; |
| |
| /* |
| * Maximum listen interval supported by the driver in units of beacons. |
| * |
| * Range: u16 |
| */ |
| u8 max_listen_interval; |
| }; |
| |
| enum { |
| CONF_REF_CLK_19_2_E, |
| CONF_REF_CLK_26_E, |
| CONF_REF_CLK_38_4_E, |
| CONF_REF_CLK_52_E, |
| CONF_REF_CLK_38_4_M_XTAL, |
| CONF_REF_CLK_26_M_XTAL, |
| }; |
| |
| enum single_dual_band_enum { |
| CONF_SINGLE_BAND, |
| CONF_DUAL_BAND |
| }; |
| |
| #define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15 |
| #define CONF_NUMBER_OF_SUB_BANDS_5 7 |
| #define CONF_NUMBER_OF_RATE_GROUPS 6 |
| #define CONF_NUMBER_OF_CHANNELS_2_4 14 |
| #define CONF_NUMBER_OF_CHANNELS_5 35 |
| |
| struct conf_itrim_settings { |
| /* enable dco itrim */ |
| u8 enable; |
| |
| /* moderation timeout in microsecs from the last TX */ |
| u32 timeout; |
| }; |
| |
| struct conf_pm_config_settings { |
| /* |
| * Host clock settling time |
| * |
| * Range: 0 - 30000 us |
| */ |
| u32 host_clk_settling_time; |
| |
| /* |
| * Host fast wakeup support |
| * |
| * Range: true, false |
| */ |
| bool host_fast_wakeup_support; |
| }; |
| |
| struct conf_roam_trigger_settings { |
| /* |
| * The minimum interval between two trigger events. |
| * |
| * Range: 0 - 60000 ms |
| */ |
| u16 trigger_pacing; |
| |
| /* |
| * The weight for rssi/beacon average calculation |
| * |
| * Range: 0 - 255 |
| */ |
| u8 avg_weight_rssi_beacon; |
| |
| /* |
| * The weight for rssi/data frame average calculation |
| * |
| * Range: 0 - 255 |
| */ |
| u8 avg_weight_rssi_data; |
| |
| /* |
| * The weight for snr/beacon average calculation |
| * |
| * Range: 0 - 255 |
| */ |
| u8 avg_weight_snr_beacon; |
| |
| /* |
| * The weight for snr/data frame average calculation |
| * |
| * Range: 0 - 255 |
| */ |
| u8 avg_weight_snr_data; |
| }; |
| |
| struct conf_scan_settings { |
| /* |
| * The minimum time to wait on each channel for active scans |
| * |
| * Range: u32 tu/1000 |
| */ |
| u32 min_dwell_time_active; |
| |
| /* |
| * The maximum time to wait on each channel for active scans |
| * |
| * Range: u32 tu/1000 |
| */ |
| u32 max_dwell_time_active; |
| |
| /* |
| * The minimum time to wait on each channel for passive scans |
| * |
| * Range: u32 tu/1000 |
| */ |
| u32 min_dwell_time_passive; |
| |
| /* |
| * The maximum time to wait on each channel for passive scans |
| * |
| * Range: u32 tu/1000 |
| */ |
| u32 max_dwell_time_passive; |
| |
| /* |
| * Number of probe requests to transmit on each active scan channel |
| * |
| * Range: u8 |
| */ |
| u16 num_probe_reqs; |
| |
| }; |
| |
| /* these are number of channels on the band divided by two, rounded up */ |
| #define CONF_TX_PWR_COMPENSATION_LEN_2 7 |
| #define CONF_TX_PWR_COMPENSATION_LEN_5 18 |
| |
| struct conf_rf_settings { |
| /* |
| * Per channel power compensation for 2.4GHz |
| * |
| * Range: s8 |
| */ |
| u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2]; |
| |
| /* |
| * Per channel power compensation for 5GHz |
| * |
| * Range: s8 |
| */ |
| u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5]; |
| }; |
| |
| struct conf_ht_setting { |
| u16 tx_ba_win_size; |
| u16 inactivity_timeout; |
| }; |
| |
| struct conf_memory_settings { |
| /* Number of stations supported in IBSS mode */ |
| u8 num_stations; |
| |
| /* Number of ssid profiles used in IBSS mode */ |
| u8 ssid_profiles; |
| |
| /* Number of memory buffers allocated to rx pool */ |
| u8 rx_block_num; |
| |
| /* Minimum number of blocks allocated to tx pool */ |
| u8 tx_min_block_num; |
| |
| /* Disable/Enable dynamic memory */ |
| u8 dynamic_memory; |
| |
| /* |
| * Minimum required free tx memory blocks in order to assure optimum |
| * performence |
| * |
| * Range: 0-120 |
| */ |
| u8 min_req_tx_blocks; |
| |
| /* |
| * Minimum required free rx memory blocks in order to assure optimum |
| * performence |
| * |
| * Range: 0-120 |
| */ |
| u8 min_req_rx_blocks; |
| |
| /* |
| * Minimum number of mem blocks (free+used) guaranteed for TX |
| * |
| * Range: 0-120 |
| */ |
| u8 tx_min; |
| }; |
| |
| struct conf_drv_settings { |
| struct conf_sg_settings sg; |
| struct conf_rx_settings rx; |
| struct conf_tx_settings tx; |
| struct conf_conn_settings conn; |
| struct conf_itrim_settings itrim; |
| struct conf_pm_config_settings pm_config; |
| struct conf_roam_trigger_settings roam_trigger; |
| struct conf_scan_settings scan; |
| struct conf_rf_settings rf; |
| struct conf_ht_setting ht; |
| struct conf_memory_settings mem_wl127x; |
| struct conf_memory_settings mem_wl128x; |
| u8 hci_io_ds; |
| }; |
| |
| #endif |