diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index 9b22bd1..eac7df9 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -114,11 +114,11 @@
 Then you must load the gadget serial driver.  To load it as an
 ACM device (recommended for interoperability), do this:
 
-  modprobe g_serial use_acm=1
+  modprobe g_serial
 
 To load it as a vendor specific bulk in/out device, do this:
 
-  modprobe g_serial
+  modprobe g_serial use_acm=0
 
 This will also automatically load the underlying gadget peripheral
 controller driver.  This must be done each time you reboot the gadget
diff --git a/Documentation/usb/proc_usb_info.txt b/Documentation/usb/proc_usb_info.txt
index 077e903..fafcd47 100644
--- a/Documentation/usb/proc_usb_info.txt
+++ b/Documentation/usb/proc_usb_info.txt
@@ -49,8 +49,10 @@
 
 These files can be read as binary data.  The binary data consists
 of first the device descriptor, then the descriptors for each
-configuration of the device.  That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device.  Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel.  This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
 
 These files may also be used to write user-level drivers for the USB
 devices.  You would open the /proc/bus/usb/BBB/DDD file read/write,
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 2917ce4..2704819 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -34,11 +34,12 @@
 Verify that bus sockets are present.
 
 # ls /sys/kernel/debug/usbmon
-0s  0t  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
+0s  0u  1s  1t  1u  2s  2t  2u  3s  3t  3u  4s  4t  4u
 #
 
-Now you can choose to either use the sockets numbered '0' (to capture packets on
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+Now you can choose to either use the socket '0u' (to capture packets on all
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
 
 2. Find which bus connects to the desired device
 
@@ -99,8 +100,9 @@
 
 Here is the list of words, from left to right:
 
-- URB Tag. This is used to identify URBs is normally a kernel mode address
- of the URB structure in hexadecimal.
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
+  of the URB structure in hexadecimal, but can be a sequence number or any
+  other unique string, within reason.
 
 - Timestamp in microseconds, a decimal number. The timestamp's resolution
   depends on available clock, and so it can be much worse than a microsecond
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 8e74657..43a863c 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -51,6 +51,7 @@
 	{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
 	{ 0, } /* terminating entry */
 };
+MODULE_DEVICE_TABLE(usb, usbtmc_devices);
 
 /*
  * This structure is the capabilities for the device
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 3d7793d..8c08130 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -279,7 +279,9 @@
 	 * altsetting means creating new endpoint device entries).
 	 * When either of these happens, defer the Set-Interface.
 	 */
-	if (!error && intf->dev.power.status == DPM_ON)
+	if (intf->cur_altsetting->desc.bAlternateSetting == 0)
+		;	/* Already in altsetting 0 so skip Set-Interface */
+	else if (!error && intf->dev.power.status == DPM_ON)
 		usb_set_interface(udev, intf->altsetting[0].
 				desc.bInterfaceNumber, 0);
 	else
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 428b599..3a8bb53 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -651,6 +651,8 @@
 				fs_in_desc.bEndpointAddress;
 		hs_out_desc.bEndpointAddress =
 				fs_out_desc.bEndpointAddress;
+		hs_notify_desc.bEndpointAddress =
+				fs_notify_desc.bEndpointAddress;
 
 		/* copy descriptors, and track endpoint copies */
 		f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
@@ -662,6 +664,8 @@
 				f->hs_descriptors, &hs_in_desc);
 		rndis->hs.out = usb_find_endpoint(eth_hs_function,
 				f->hs_descriptors, &hs_out_desc);
+		rndis->hs.notify = usb_find_endpoint(eth_hs_function,
+				f->hs_descriptors, &hs_notify_desc);
 	}
 
 	rndis->port.open = rndis_open;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index aad1359..fb6f293 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -143,6 +143,7 @@
 static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -166,6 +167,7 @@
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
 	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 07a3992..373ee09 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -40,6 +40,9 @@
 /* AlphaMicro Components AMC-232USB01 device */
 #define FTDI_AMC232_PID 0xFF00 /* Product Id */
 
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
 /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
 /* the VID is the standard ftdi vid (FTDI_VID) */
 #define FTDI_SCS_DEVICE_0_PID 0xD010    /* SCS PTC-IIusb */
@@ -75,6 +78,9 @@
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID	0xBFD8
 
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II		0xF0C8
+
 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
 #define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 491c885..1aed584 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,6 +91,8 @@
 	{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
 	{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index a3bd039..54974f4 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -110,3 +110,11 @@
 /* Y.C. Cable U.S.A., Inc - USB to RS-232 */
 #define YCCABLE_VENDOR_ID	0x05ad
 #define YCCABLE_PRODUCT_ID	0x0fba
+
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID	0x5372
+#define SUPERIAL_PRODUCT_ID	0x2303
+
+/* Hewlett-Packard LD220-HP POS Pole Display */
+#define HP_VENDOR_ID		0x03f0
+#define HP_LD220_PRODUCT_ID	0x3524
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 31c42d1..01d0c70 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -16,56 +16,6 @@
  * For questions or problems with this driver, contact Texas Instruments
  * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
  * Peter Berger <pberger@brimson.com>.
- *
- * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
- * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
- * configuration.
- *
- * #!/bin/bash
- *
- * BOOT_CONFIG=1
- * ACTIVE_CONFIG=2
- *
- * if [[ "$ACTION" != "add" ]]
- * then
- * 	exit
- * fi
- *
- * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
- *
- * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
- * then
- * 	exit
- * fi
- *
- * PRODUCT=${PRODUCT%/?*}		# delete version
- * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
- * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
- *
- * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
- *
- * function scan() {
- * 	s=$1
- * 	shift
- * 	for i
- * 	do
- * 		if [[ $s -eq $i ]]
- * 		then
- * 			return 0
- * 		fi
- * 	done
- * 	return 1
- * }
- *
- * IFS=$IFS,
- *
- * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
- * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
- * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
- * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
- * then
- * 	echo $ACTIVE_CONFIG > $CONFIG_PATH
- * fi
  */
 
 #include <linux/kernel.h>
@@ -457,9 +407,10 @@
 		goto free_tdev;
 	}
 
-	/* the second configuration must be set (in sysfs by hotplug script) */
+	/* the second configuration must be set */
 	if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
-		status = -ENODEV;
+		status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
+		status = status ? status : -ENODEV;
 		goto free_tdev;
 	}
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index e61f2bf..bfcc1fe 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -167,8 +167,22 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Ozan Sener <themgzzy@gmail.com> */
+UNUSUAL_DEV(  0x0421, 0x0060, 0x0551, 0x0551,
+		"Nokia",
+		"3500c",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
+/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */
+UNUSUAL_DEV(  0x0421, 0x0063, 0x0001, 0x0601,
+		"Nokia",
+		"Nokia 3109c",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY ),
+
 /* Patch for Nokia 5310 capacity */
-UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0591,
+UNUSUAL_DEV(  0x0421, 0x006a, 0x0000, 0x0701,
 		"Nokia",
 		"5310",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 73a2f4e..9b42bae 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -158,8 +158,12 @@
  * (rarely) accepted by SET_DESCRIPTOR.
  *
  * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire".  But when exposed through Linux-USB APIs,
- * they've been converted to cpu byte order.
+ * byte order "on the wire".  Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
  */
 
 /*