drm/radeon/dp: switch to the common i2c over aux code
Provides a nice cleanup in radeon.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index e448304..1593652 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -207,98 +207,15 @@
void radeon_dp_aux_init(struct radeon_connector *radeon_connector)
{
- struct radeon_connector_atom_dig *dig_connector = radeon_connector->con_priv;
-
- dig_connector->dp_i2c_bus->aux.dev = radeon_connector->base.kdev;
- dig_connector->dp_i2c_bus->aux.transfer = radeon_dp_aux_transfer;
-}
-
-int radeon_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
- u8 write_byte, u8 *read_byte)
-{
- struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
- struct radeon_i2c_chan *auxch = i2c_get_adapdata(adapter);
- u16 address = algo_data->address;
- u8 msg[5];
- u8 reply[2];
- unsigned retry;
- int msg_bytes;
- int reply_bytes = 1;
int ret;
- u8 ack;
- /* Set up the address */
- msg[0] = address;
- msg[1] = address >> 8;
+ radeon_connector->ddc_bus->aux.dev = radeon_connector->base.kdev;
+ radeon_connector->ddc_bus->aux.transfer = radeon_dp_aux_transfer;
+ ret = drm_dp_aux_register_i2c_bus(&radeon_connector->ddc_bus->aux);
+ if (!ret)
+ radeon_connector->ddc_bus->has_aux = true;
- /* Set up the command byte */
- if (mode & MODE_I2C_READ) {
- msg[2] = DP_AUX_I2C_READ << 4;
- msg_bytes = 4;
- msg[3] = msg_bytes << 4;
- } else {
- msg[2] = DP_AUX_I2C_WRITE << 4;
- msg_bytes = 5;
- msg[3] = msg_bytes << 4;
- msg[4] = write_byte;
- }
-
- /* special handling for start/stop */
- if (mode & (MODE_I2C_START | MODE_I2C_STOP))
- msg[3] = 3 << 4;
-
- /* Set MOT bit for all but stop */
- if ((mode & MODE_I2C_STOP) == 0)
- msg[2] |= DP_AUX_I2C_MOT << 4;
-
- for (retry = 0; retry < 7; retry++) {
- ret = radeon_process_aux_ch(auxch,
- msg, msg_bytes, reply, reply_bytes, 0, &ack);
- if (ret == -EBUSY)
- continue;
- else if (ret < 0) {
- DRM_DEBUG_KMS("aux_ch failed %d\n", ret);
- return ret;
- }
-
- switch ((ack >> 4) & DP_AUX_NATIVE_REPLY_MASK) {
- case DP_AUX_NATIVE_REPLY_ACK:
- /* I2C-over-AUX Reply field is only valid
- * when paired with AUX ACK.
- */
- break;
- case DP_AUX_NATIVE_REPLY_NACK:
- DRM_DEBUG_KMS("aux_ch native nack\n");
- return -EREMOTEIO;
- case DP_AUX_NATIVE_REPLY_DEFER:
- DRM_DEBUG_KMS("aux_ch native defer\n");
- usleep_range(500, 600);
- continue;
- default:
- DRM_ERROR("aux_ch invalid native reply 0x%02x\n", ack);
- return -EREMOTEIO;
- }
-
- switch ((ack >> 4) & DP_AUX_I2C_REPLY_MASK) {
- case DP_AUX_I2C_REPLY_ACK:
- if (mode == MODE_I2C_READ)
- *read_byte = reply[0];
- return ret;
- case DP_AUX_I2C_REPLY_NACK:
- DRM_DEBUG_KMS("aux_i2c nack\n");
- return -EREMOTEIO;
- case DP_AUX_I2C_REPLY_DEFER:
- DRM_DEBUG_KMS("aux_i2c defer\n");
- usleep_range(400, 500);
- break;
- default:
- DRM_ERROR("aux_i2c invalid reply 0x%02x\n", ack);
- return -EREMOTEIO;
- }
- }
-
- DRM_DEBUG_KMS("aux i2c too many retries, giving up\n");
- return -EREMOTEIO;
+ WARN(ret, "drm_dp_aux_register_i2c_bus() failed with error %d\n", ret);
}
/***** general DP utility functions *****/
@@ -433,12 +350,11 @@
u8 radeon_dp_getsinktype(struct radeon_connector *radeon_connector)
{
- struct radeon_connector_atom_dig *dig_connector = radeon_connector->con_priv;
struct drm_device *dev = radeon_connector->base.dev;
struct radeon_device *rdev = dev->dev_private;
return radeon_dp_encoder_service(rdev, ATOM_DP_ACTION_GET_SINK_TYPE, 0,
- dig_connector->dp_i2c_bus->rec.i2c_id, 0);
+ radeon_connector->ddc_bus->rec.i2c_id, 0);
}
static void radeon_dp_probe_oui(struct radeon_connector *radeon_connector)
@@ -449,11 +365,11 @@
if (!(dig_connector->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT))
return;
- if (drm_dp_dpcd_read(&dig_connector->dp_i2c_bus->aux, DP_SINK_OUI, buf, 3))
+ if (drm_dp_dpcd_read(&radeon_connector->ddc_bus->aux, DP_SINK_OUI, buf, 3))
DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
buf[0], buf[1], buf[2]);
- if (drm_dp_dpcd_read(&dig_connector->dp_i2c_bus->aux, DP_BRANCH_OUI, buf, 3))
+ if (drm_dp_dpcd_read(&radeon_connector->ddc_bus->aux, DP_BRANCH_OUI, buf, 3))
DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
buf[0], buf[1], buf[2]);
}
@@ -464,7 +380,7 @@
u8 msg[DP_DPCD_SIZE];
int ret, i;
- ret = drm_dp_dpcd_read(&dig_connector->dp_i2c_bus->aux, DP_DPCD_REV, msg,
+ ret = drm_dp_dpcd_read(&radeon_connector->ddc_bus->aux, DP_DPCD_REV, msg,
DP_DPCD_SIZE);
if (ret > 0) {
memcpy(dig_connector->dpcd, msg, DP_DPCD_SIZE);
@@ -502,7 +418,7 @@
if (dp_bridge != ENCODER_OBJECT_ID_NONE) {
/* DP bridge chips */
- drm_dp_dpcd_readb(&dig_connector->dp_i2c_bus->aux,
+ drm_dp_dpcd_readb(&radeon_connector->ddc_bus->aux,
DP_EDP_CONFIGURATION_CAP, &tmp);
if (tmp & 1)
panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
@@ -513,7 +429,7 @@
panel_mode = DP_PANEL_MODE_EXTERNAL_DP_MODE;
} else if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
/* eDP */
- drm_dp_dpcd_readb(&dig_connector->dp_i2c_bus->aux,
+ drm_dp_dpcd_readb(&radeon_connector->ddc_bus->aux,
DP_EDP_CONFIGURATION_CAP, &tmp);
if (tmp & 1)
panel_mode = DP_PANEL_MODE_INTERNAL_DP2_MODE;
@@ -567,7 +483,8 @@
u8 link_status[DP_LINK_STATUS_SIZE];
struct radeon_connector_atom_dig *dig = radeon_connector->con_priv;
- if (drm_dp_dpcd_read_link_status(&dig->dp_i2c_bus->aux, link_status) <= 0)
+ if (drm_dp_dpcd_read_link_status(&radeon_connector->ddc_bus->aux, link_status)
+ <= 0)
return false;
if (drm_dp_channel_eq_ok(link_status, dig->dp_lane_count))
return false;
@@ -587,7 +504,7 @@
/* power up/down the sink */
if (dig_connector->dpcd[0] >= 0x11) {
- drm_dp_dpcd_writeb(&dig_connector->dp_i2c_bus->aux,
+ drm_dp_dpcd_writeb(&radeon_connector->ddc_bus->aux,
DP_SET_POWER, power_state);
usleep_range(1000, 2000);
}
@@ -891,7 +808,7 @@
else
dp_info.enc_id |= ATOM_DP_CONFIG_LINK_A;
- drm_dp_dpcd_readb(&dig_connector->dp_i2c_bus->aux, DP_MAX_LANE_COUNT, &tmp);
+ drm_dp_dpcd_readb(&radeon_connector->ddc_bus->aux, DP_MAX_LANE_COUNT, &tmp);
if (ASIC_IS_DCE5(rdev) && (tmp & DP_TPS3_SUPPORTED))
dp_info.tp3_supported = true;
else
@@ -903,7 +820,7 @@
dp_info.connector = connector;
dp_info.dp_lane_count = dig_connector->dp_lane_count;
dp_info.dp_clock = dig_connector->dp_clock;
- dp_info.aux = &dig_connector->dp_i2c_bus->aux;
+ dp_info.aux = &radeon_connector->ddc_bus->aux;
if (radeon_dp_link_train_init(&dp_info))
goto done;