| /* |
| * Copyright (c) 2015-2017, The Linux Foundation.All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #ifndef _DSI_DISPLAY_H_ |
| #define _DSI_DISPLAY_H_ |
| |
| #include <linux/types.h> |
| #include <linux/bitops.h> |
| #include <linux/debugfs.h> |
| #include <linux/of_device.h> |
| #include <drm/drmP.h> |
| #include <drm/drm_crtc.h> |
| |
| #include "msm_drv.h" |
| #include "dsi_defs.h" |
| #include "dsi_ctrl.h" |
| #include "dsi_phy.h" |
| #include "dsi_panel.h" |
| |
| #define MAX_DSI_CTRLS_PER_DISPLAY 2 |
| #define DSI_CLIENT_NAME_SIZE 20 |
| #define MAX_CMDLINE_PARAM_LEN 512 |
| /* |
| * DSI Validate Mode modifiers |
| * @DSI_VALIDATE_FLAG_ALLOW_ADJUST: Allow mode validation to also do fixup |
| */ |
| #define DSI_VALIDATE_FLAG_ALLOW_ADJUST 0x1 |
| |
| /** |
| * enum dsi_display_selection_type - enumerates DSI display selection types |
| * @DSI_PRIMARY: primary DSI display selected from module parameter |
| * @DSI_SECONDARY: Secondary DSI display selected from module parameter |
| * @MAX_DSI_ACTIVE_DISPLAY: Maximum acive displays that can be selected |
| */ |
| enum dsi_display_selection_type { |
| DSI_PRIMARY = 0, |
| DSI_SECONDARY, |
| MAX_DSI_ACTIVE_DISPLAY, |
| }; |
| |
| /** |
| * enum dsi_display_type - enumerates DSI display types |
| * @DSI_DISPLAY_SINGLE: A panel connected on a single DSI interface. |
| * @DSI_DISPLAY_EXT_BRIDGE: A bridge is connected between panel and DSI host. |
| * It utilizes a single DSI interface. |
| * @DSI_DISPLAY_SPLIT: A panel that utilizes more than one DSI |
| * interfaces. |
| * @DSI_DISPLAY_SPLIT_EXT_BRIDGE: A bridge is present between panel and DSI |
| * host. It utilizes more than one DSI interface. |
| */ |
| enum dsi_display_type { |
| DSI_DISPLAY_SINGLE = 0, |
| DSI_DISPLAY_EXT_BRIDGE, |
| DSI_DISPLAY_SPLIT, |
| DSI_DISPLAY_SPLIT_EXT_BRIDGE, |
| DSI_DISPLAY_MAX, |
| }; |
| |
| /** |
| * struct dsi_display_ctrl - dsi ctrl/phy information for the display |
| * @ctrl: Handle to the DSI controller device. |
| * @ctrl_of_node: pHandle to the DSI controller device. |
| * @dsi_ctrl_idx: DSI controller instance id. |
| * @power_state: Current power state of the DSI controller. |
| * @phy: Handle to the DSI PHY device. |
| * @phy_of_node: pHandle to the DSI PHY device. |
| * @phy_enabled: PHY power status. |
| */ |
| struct dsi_display_ctrl { |
| /* controller info */ |
| struct dsi_ctrl *ctrl; |
| struct device_node *ctrl_of_node; |
| u32 dsi_ctrl_idx; |
| |
| enum dsi_power_state power_state; |
| |
| /* phy info */ |
| struct msm_dsi_phy *phy; |
| struct device_node *phy_of_node; |
| |
| bool phy_enabled; |
| }; |
| /** |
| * struct dsi_display_boot_param - defines DSI boot display selection |
| * @name:Name of DSI display selected as a boot param. |
| * @boot_disp_en:bool to indicate dtsi availability of display node |
| * @is_primary:bool to indicate whether current display is primary display |
| * @length:length of DSI display. |
| * @cmdline_topology: Display topology shared from kernel command line. |
| */ |
| struct dsi_display_boot_param { |
| char name[MAX_CMDLINE_PARAM_LEN]; |
| bool boot_disp_en; |
| bool is_primary; |
| int length; |
| struct device_node *node; |
| int cmdline_topology; |
| }; |
| |
| /** |
| * struct dsi_display_clk_info - dsi display clock source information |
| * @src_clks: Source clocks for DSI display. |
| * @mux_clks: Mux clocks used for DFPS. |
| * @shadow_clks: Used for DFPS. |
| */ |
| struct dsi_display_clk_info { |
| struct dsi_clk_link_set src_clks; |
| struct dsi_clk_link_set mux_clks; |
| struct dsi_clk_link_set shadow_clks; |
| }; |
| |
| /** |
| * struct dsi_display - dsi display information |
| * @pdev: Pointer to platform device. |
| * @drm_dev: DRM device associated with the display. |
| * @name: Name of the display. |
| * @display_type: Display type as defined in device tree. |
| * @list: List pointer. |
| * @is_active: Is display active. |
| * @is_cont_splash_enabled: Is continuous splash enabled |
| * @display_lock: Mutex for dsi_display interface. |
| * @ctrl_count: Number of DSI interfaces required by panel. |
| * @ctrl: Controller information for DSI display. |
| * @panel: Handle to DSI panel. |
| * @panel_of: pHandle to DSI panel. |
| * @type: DSI display type. |
| * @clk_master_idx: The master controller for controlling clocks. This is an |
| * index into the ctrl[MAX_DSI_CTRLS_PER_DISPLAY] array. |
| * @cmd_master_idx: The master controller for sending DSI commands to panel. |
| * @video_master_idx: The master controller for enabling video engine. |
| * @clock_info: Clock sourcing for DSI display. |
| * @config: DSI host configuration information. |
| * @lane_map: Lane mapping between DSI host and Panel. |
| * @cmdline_topology: Display topology shared from kernel command line. |
| * @cmdline_timing: Display timing shared from kernel command line. |
| * @is_tpg_enabled: TPG state. |
| * @ulps_enabled: ulps state. |
| * @clamp_enabled: clamp state. |
| * @phy_idle_power_off: PHY power state. |
| * @host: DRM MIPI DSI Host. |
| * @bridge: Pointer to DRM bridge object. |
| * @cmd_engine_refcount: Reference count enforcing single instance of cmd eng |
| * @clk_mngr: DSI clock manager. |
| * @dsi_clk_handle: DSI clock handle. |
| * @mdp_clk_handle: MDP clock handle. |
| * @root: Debugfs root directory |
| * @misr_enable Frame MISR enable/disable |
| * @misr_frame_count Number of frames to accumulate the MISR value |
| */ |
| struct dsi_display { |
| struct platform_device *pdev; |
| struct drm_device *drm_dev; |
| |
| const char *name; |
| const char *display_type; |
| struct list_head list; |
| bool is_active; |
| bool is_cont_splash_enabled; |
| struct mutex display_lock; |
| |
| u32 ctrl_count; |
| struct dsi_display_ctrl ctrl[MAX_DSI_CTRLS_PER_DISPLAY]; |
| |
| /* panel info */ |
| struct dsi_panel *panel; |
| struct device_node *panel_of; |
| |
| enum dsi_display_type type; |
| u32 clk_master_idx; |
| u32 cmd_master_idx; |
| u32 video_master_idx; |
| |
| struct dsi_display_clk_info clock_info; |
| struct dsi_host_config config; |
| struct dsi_lane_map lane_map; |
| int cmdline_topology; |
| int cmdline_timing; |
| bool is_tpg_enabled; |
| bool ulps_enabled; |
| bool clamp_enabled; |
| bool phy_idle_power_off; |
| struct drm_gem_object *tx_cmd_buf; |
| u32 cmd_buffer_size; |
| u32 cmd_buffer_iova; |
| void *vaddr; |
| struct msm_gem_address_space *aspace; |
| |
| struct mipi_dsi_host host; |
| struct dsi_bridge *bridge; |
| u32 cmd_engine_refcount; |
| |
| struct sde_power_handle *phandle; |
| struct sde_power_client *cont_splash_client; |
| |
| void *clk_mngr; |
| void *dsi_clk_handle; |
| void *mdp_clk_handle; |
| |
| /* DEBUG FS */ |
| struct dentry *root; |
| |
| bool misr_enable; |
| u32 misr_frame_count; |
| /* multiple dsi error handlers */ |
| struct workqueue_struct *err_workq; |
| struct work_struct fifo_underflow_work; |
| struct work_struct fifo_overflow_work; |
| struct work_struct lp_rx_timeout_work; |
| }; |
| |
| int dsi_display_dev_probe(struct platform_device *pdev); |
| int dsi_display_dev_remove(struct platform_device *pdev); |
| |
| /** |
| * dsi_display_get_num_of_displays() - returns number of display devices |
| * supported. |
| * |
| * Return: number of displays. |
| */ |
| int dsi_display_get_num_of_displays(void); |
| |
| /** |
| * dsi_display_get_active_displays - returns pointers for active display devices |
| * @display_array: Pointer to display array to be filled |
| * @max_display_count: Size of display_array |
| * @Returns: Number of display entries filled |
| */ |
| int dsi_display_get_active_displays(void **display_array, |
| u32 max_display_count); |
| |
| /** |
| * dsi_display_get_boot_display()- get DSI boot display name |
| * @index: index of display selection |
| * |
| * Return: returns the display node pointer |
| */ |
| struct device_node *dsi_display_get_boot_display(int index); |
| |
| /** |
| * dsi_display_get_display_by_name()- finds display by name |
| * @name: name of the display. |
| * |
| * Return: handle to the display or error code. |
| */ |
| struct dsi_display *dsi_display_get_display_by_name(const char *name); |
| |
| /** |
| * dsi_display_set_active_state() - sets the state of the display |
| * @display: Handle to display. |
| * @is_active: state |
| */ |
| void dsi_display_set_active_state(struct dsi_display *display, bool is_active); |
| |
| /** |
| * dsi_display_drm_bridge_init() - initializes DRM bridge object for DSI |
| * @display: Handle to the display. |
| * @encoder: Pointer to the encoder object which is connected to the |
| * display. |
| * |
| * Return: error code. |
| */ |
| int dsi_display_drm_bridge_init(struct dsi_display *display, |
| struct drm_encoder *enc); |
| |
| /** |
| * dsi_display_drm_bridge_deinit() - destroys DRM bridge for the display |
| * @display: Handle to the display. |
| * |
| * Return: error code. |
| */ |
| int dsi_display_drm_bridge_deinit(struct dsi_display *display); |
| |
| /** |
| * dsi_display_get_info() - returns the display properties |
| * @info: Pointer to the structure where info is stored. |
| * @disp: Handle to the display. |
| * |
| * Return: error code. |
| */ |
| int dsi_display_get_info(struct msm_display_info *info, void *disp); |
| |
| /** |
| * dsi_display_get_mode_count() - get number of modes supported by the display |
| * @display: Handle to display. |
| * @count: Number of modes supported |
| * |
| * Return: error code. |
| */ |
| int dsi_display_get_mode_count(struct dsi_display *display, u32 *count); |
| |
| /** |
| * dsi_display_get_modes() - get modes supported by display |
| * @display: Handle to display. |
| * @modes; Pointer to array of modes. Memory allocated should be |
| * big enough to store (count * struct dsi_display_mode) |
| * elements. If modes pointer is NULL, number of modes will |
| * be stored in the memory pointed to by count. |
| * |
| * Return: error code. |
| */ |
| int dsi_display_get_modes(struct dsi_display *display, |
| struct dsi_display_mode *modes); |
| |
| /** |
| * dsi_display_put_mode() - free up mode created for the display |
| * @display: Handle to display. |
| * @mode: Display mode to be freed up |
| * |
| * Return: error code. |
| */ |
| void dsi_display_put_mode(struct dsi_display *display, |
| struct dsi_display_mode *mode); |
| |
| /** |
| * dsi_display_validate_mode() - validates if mode is supported by display |
| * @display: Handle to display. |
| * @mode: Mode to be validated. |
| * @flags: Modifier flags. |
| * |
| * Return: 0 if supported or error code. |
| */ |
| int dsi_display_validate_mode(struct dsi_display *display, |
| struct dsi_display_mode *mode, |
| u32 flags); |
| |
| /** |
| * dsi_display_validate_mode_vrr() - validates mode if variable refresh case |
| * @display: Handle to display. |
| * @mode: Mode to be validated.. |
| * |
| * Return: 0 if error code. |
| */ |
| int dsi_display_validate_mode_vrr(struct dsi_display *display, |
| struct dsi_display_mode *cur_dsi_mode, |
| struct dsi_display_mode *mode); |
| |
| /** |
| * dsi_display_set_mode() - Set mode on the display. |
| * @display: Handle to display. |
| * @mode: mode to be set. |
| * @flags: Modifier flags. |
| * |
| * Return: error code. |
| */ |
| int dsi_display_set_mode(struct dsi_display *display, |
| struct dsi_display_mode *mode, |
| u32 flags); |
| |
| /** |
| * dsi_display_prepare() - prepare display |
| * @display: Handle to display. |
| * |
| * Prepare will perform power up sequences for the host and panel hardware. |
| * Power and clock resources might be turned on (depending on the panel mode). |
| * The video engine is not enabled. |
| * |
| * Return: error code. |
| */ |
| int dsi_display_prepare(struct dsi_display *display); |
| |
| /** |
| * dsi_display_splash_res_cleanup() - cleanup for continuous splash |
| * @display: Pointer to dsi display |
| * Returns: Zero on success |
| */ |
| int dsi_display_splash_res_cleanup(struct dsi_display *display); |
| |
| /** |
| * dsi_display_config_ctrl_for_cont_splash()- Enable engine modes for DSI |
| * controller during continuous splash |
| * @display: Handle to DSI display |
| * |
| * Return: returns error code |
| */ |
| int dsi_display_config_ctrl_for_cont_splash(struct dsi_display *display); |
| |
| /** |
| * dsi_display_enable() - enable display |
| * @display: Handle to display. |
| * |
| * Enable will turn on the host engine and the panel. At the end of the enable |
| * function, Host and panel hardware are ready to accept pixel data from |
| * upstream. |
| * |
| * Return: error code. |
| */ |
| int dsi_display_enable(struct dsi_display *display); |
| |
| /** |
| * dsi_display_post_enable() - perform post enable operations. |
| * @display: Handle to display. |
| * |
| * Some panels might require some commands to be sent after pixel data |
| * transmission has started. Such commands are sent as part of the post_enable |
| * function. |
| * |
| * Return: error code. |
| */ |
| int dsi_display_post_enable(struct dsi_display *display); |
| |
| /** |
| * dsi_display_pre_disable() - perform pre disable operations. |
| * @display: Handle to display. |
| * |
| * If a panel requires commands to be sent before pixel data transmission is |
| * stopped, those can be sent as part of pre_disable. |
| * |
| * Return: error code. |
| */ |
| int dsi_display_pre_disable(struct dsi_display *display); |
| |
| /** |
| * dsi_display_disable() - disable panel and host hardware. |
| * @display: Handle to display. |
| * |
| * Disable host and panel hardware and pixel data transmission can not continue. |
| * |
| * Return: error code. |
| */ |
| int dsi_display_disable(struct dsi_display *display); |
| |
| /** |
| * dsi_pre_clkoff_cb() - Callback before clock is turned off |
| * @priv: private data pointer. |
| * @clk_type: clock which is being turned on. |
| * @new_state: next state for the clock. |
| * |
| * @return: error code. |
| */ |
| int dsi_pre_clkoff_cb(void *priv, enum dsi_clk_type clk_type, |
| enum dsi_clk_state new_state); |
| |
| /** |
| * dsi_display_update_pps() - update PPS buffer. |
| * @pps_cmd: PPS buffer. |
| * @display: Handle to display. |
| * |
| * Copies new PPS buffer into display structure. |
| * |
| * Return: error code. |
| */ |
| int dsi_display_update_pps(char *pps_cmd, void *display); |
| |
| /** |
| * dsi_post_clkoff_cb() - Callback after clock is turned off |
| * @priv: private data pointer. |
| * @clk_type: clock which is being turned on. |
| * @curr_state: current state for the clock. |
| * |
| * @return: error code. |
| */ |
| int dsi_post_clkoff_cb(void *priv, enum dsi_clk_type clk_type, |
| enum dsi_clk_state curr_state); |
| |
| /** |
| * dsi_post_clkon_cb() - Callback after clock is turned on |
| * @priv: private data pointer. |
| * @clk_type: clock which is being turned on. |
| * @curr_state: current state for the clock. |
| * |
| * @return: error code. |
| */ |
| int dsi_post_clkon_cb(void *priv, enum dsi_clk_type clk_type, |
| enum dsi_clk_state curr_state); |
| |
| |
| /** |
| * dsi_pre_clkon_cb() - Callback before clock is turned on |
| * @priv: private data pointer. |
| * @clk_type: clock which is being turned on. |
| * @new_state: next state for the clock. |
| * |
| * @return: error code. |
| */ |
| int dsi_pre_clkon_cb(void *priv, enum dsi_clk_type clk_type, |
| enum dsi_clk_state new_state); |
| |
| /** |
| * dsi_display_unprepare() - power off display hardware. |
| * @display: Handle to display. |
| * |
| * Host and panel hardware is turned off. Panel will be in reset state at the |
| * end of the function. |
| * |
| * Return: error code. |
| */ |
| int dsi_display_unprepare(struct dsi_display *display); |
| |
| int dsi_display_set_tpg_state(struct dsi_display *display, bool enable); |
| |
| int dsi_display_clock_gate(struct dsi_display *display, bool enable); |
| int dsi_dispaly_static_frame(struct dsi_display *display, bool enable); |
| |
| /** |
| * dsi_display_enable_event() - enable interrupt based connector event |
| * @display: Handle to display. |
| * @event_idx: Event index. |
| * @event_info: Event callback definition. |
| * @enable: Whether to enable/disable the event interrupt. |
| */ |
| void dsi_display_enable_event(struct dsi_display *display, |
| uint32_t event_idx, struct dsi_event_cb_info *event_info, |
| bool enable); |
| |
| int dsi_display_set_backlight(void *display, u32 bl_lvl); |
| |
| /** |
| * dsi_display_check_status() - check if panel is dead or alive |
| * @display: Handle to display. |
| */ |
| int dsi_display_check_status(void *display); |
| |
| /** |
| * dsi_display_soft_reset() - perform a soft reset on DSI controller |
| * @display: Handle to display |
| * |
| * The video, command and controller engines will be disabled before the |
| * reset is triggered. After, the engines will be re-enabled to the same state |
| * as before the reset. |
| * |
| * If the reset is done while MDP timing engine is turned on, the video |
| * engine should be re-enabled only during the vertical blanking time. |
| * |
| * Return: error code |
| */ |
| int dsi_display_soft_reset(void *display); |
| |
| /** |
| * dsi_display_set_power - update power/dpms setting |
| * @connector: Pointer to drm connector structure |
| * @power_mode: One of the following, |
| * SDE_MODE_DPMS_ON |
| * SDE_MODE_DPMS_LP1 |
| * SDE_MODE_DPMS_LP2 |
| * SDE_MODE_DPMS_STANDBY |
| * SDE_MODE_DPMS_SUSPEND |
| * SDE_MODE_DPMS_OFF |
| * @display: Pointer to private display structure |
| * Returns: Zero on success |
| */ |
| int dsi_display_set_power(struct drm_connector *connector, |
| int power_mode, void *display); |
| |
| /* |
| * dsi_display_pre_kickoff - program kickoff-time features |
| * @display: Pointer to private display structure |
| * @params: Parameters for kickoff-time programming |
| * Returns: Zero on success |
| */ |
| int dsi_display_pre_kickoff(struct dsi_display *display, |
| struct msm_display_kickoff_params *params); |
| /** |
| * dsi_display_get_dst_format() - get dst_format from DSI display |
| * @display: Handle to display |
| * |
| * Return: enum dsi_pixel_format type |
| */ |
| enum dsi_pixel_format dsi_display_get_dst_format(void *display); |
| |
| #endif /* _DSI_DISPLAY_H_ */ |