| /* |
| * This file is part of the zfcp device driver for |
| * FCP adapters for IBM System z9 and zSeries. |
| * |
| * (C) Copyright IBM Corp. 2002, 2006 |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "zfcp_ext.h" |
| |
| #define ZFCP_LOG_AREA ZFCP_LOG_AREA_CONFIG |
| |
| static int zfcp_ccw_probe(struct ccw_device *); |
| static void zfcp_ccw_remove(struct ccw_device *); |
| static int zfcp_ccw_set_online(struct ccw_device *); |
| static int zfcp_ccw_set_offline(struct ccw_device *); |
| static int zfcp_ccw_notify(struct ccw_device *, int); |
| static void zfcp_ccw_shutdown(struct device *); |
| |
| static struct ccw_device_id zfcp_ccw_device_id[] = { |
| {CCW_DEVICE_DEVTYPE(ZFCP_CONTROL_UNIT_TYPE, |
| ZFCP_CONTROL_UNIT_MODEL, |
| ZFCP_DEVICE_TYPE, |
| ZFCP_DEVICE_MODEL)}, |
| {CCW_DEVICE_DEVTYPE(ZFCP_CONTROL_UNIT_TYPE, |
| ZFCP_CONTROL_UNIT_MODEL, |
| ZFCP_DEVICE_TYPE, |
| ZFCP_DEVICE_MODEL_PRIV)}, |
| {}, |
| }; |
| |
| static struct ccw_driver zfcp_ccw_driver = { |
| .owner = THIS_MODULE, |
| .name = ZFCP_NAME, |
| .ids = zfcp_ccw_device_id, |
| .probe = zfcp_ccw_probe, |
| .remove = zfcp_ccw_remove, |
| .set_online = zfcp_ccw_set_online, |
| .set_offline = zfcp_ccw_set_offline, |
| .notify = zfcp_ccw_notify, |
| .driver = { |
| .shutdown = zfcp_ccw_shutdown, |
| }, |
| }; |
| |
| MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id); |
| |
| /** |
| * zfcp_ccw_probe - probe function of zfcp driver |
| * @ccw_device: pointer to belonging ccw device |
| * |
| * This function gets called by the common i/o layer and sets up the initial |
| * data structures for each fcp adapter, which was detected by the system. |
| * Also the sysfs files for this adapter will be created by this function. |
| * In addition the nameserver port will be added to the ports of the adapter |
| * and its sysfs representation will be created too. |
| */ |
| static int |
| zfcp_ccw_probe(struct ccw_device *ccw_device) |
| { |
| struct zfcp_adapter *adapter; |
| int retval = 0; |
| |
| down(&zfcp_data.config_sema); |
| adapter = zfcp_adapter_enqueue(ccw_device); |
| if (!adapter) |
| retval = -EINVAL; |
| else |
| ZFCP_LOG_DEBUG("Probed adapter %s\n", |
| zfcp_get_busid_by_adapter(adapter)); |
| up(&zfcp_data.config_sema); |
| return retval; |
| } |
| |
| /** |
| * zfcp_ccw_remove - remove function of zfcp driver |
| * @ccw_device: pointer to belonging ccw device |
| * |
| * This function gets called by the common i/o layer and removes an adapter |
| * from the system. Task of this function is to get rid of all units and |
| * ports that belong to this adapter. And in addition all resources of this |
| * adapter will be freed too. |
| */ |
| static void |
| zfcp_ccw_remove(struct ccw_device *ccw_device) |
| { |
| struct zfcp_adapter *adapter; |
| struct zfcp_port *port, *p; |
| struct zfcp_unit *unit, *u; |
| |
| ccw_device_set_offline(ccw_device); |
| down(&zfcp_data.config_sema); |
| adapter = dev_get_drvdata(&ccw_device->dev); |
| |
| ZFCP_LOG_DEBUG("Removing adapter %s\n", |
| zfcp_get_busid_by_adapter(adapter)); |
| write_lock_irq(&zfcp_data.config_lock); |
| list_for_each_entry_safe(port, p, &adapter->port_list_head, list) { |
| list_for_each_entry_safe(unit, u, &port->unit_list_head, list) { |
| list_move(&unit->list, &port->unit_remove_lh); |
| atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, |
| &unit->status); |
| } |
| list_move(&port->list, &adapter->port_remove_lh); |
| atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status); |
| } |
| atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status); |
| write_unlock_irq(&zfcp_data.config_lock); |
| |
| list_for_each_entry_safe(port, p, &adapter->port_remove_lh, list) { |
| list_for_each_entry_safe(unit, u, &port->unit_remove_lh, list) { |
| zfcp_unit_dequeue(unit); |
| } |
| zfcp_port_dequeue(port); |
| } |
| zfcp_adapter_wait(adapter); |
| zfcp_adapter_dequeue(adapter); |
| |
| up(&zfcp_data.config_sema); |
| } |
| |
| /** |
| * zfcp_ccw_set_online - set_online function of zfcp driver |
| * @ccw_device: pointer to belonging ccw device |
| * |
| * This function gets called by the common i/o layer and sets an adapter |
| * into state online. Setting an fcp device online means that it will be |
| * registered with the SCSI stack, that the QDIO queues will be set up |
| * and that the adapter will be opened (asynchronously). |
| */ |
| static int |
| zfcp_ccw_set_online(struct ccw_device *ccw_device) |
| { |
| struct zfcp_adapter *adapter; |
| int retval; |
| |
| down(&zfcp_data.config_sema); |
| adapter = dev_get_drvdata(&ccw_device->dev); |
| |
| retval = zfcp_adapter_debug_register(adapter); |
| if (retval) |
| goto out; |
| retval = zfcp_erp_thread_setup(adapter); |
| if (retval) { |
| ZFCP_LOG_INFO("error: start of error recovery thread for " |
| "adapter %s failed\n", |
| zfcp_get_busid_by_adapter(adapter)); |
| goto out_erp_thread; |
| } |
| |
| retval = zfcp_adapter_scsi_register(adapter); |
| if (retval) |
| goto out_scsi_register; |
| zfcp_erp_modify_adapter_status(adapter, ZFCP_STATUS_COMMON_RUNNING, |
| ZFCP_SET); |
| zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED); |
| zfcp_erp_wait(adapter); |
| goto out; |
| |
| out_scsi_register: |
| zfcp_erp_thread_kill(adapter); |
| out_erp_thread: |
| zfcp_adapter_debug_unregister(adapter); |
| out: |
| up(&zfcp_data.config_sema); |
| return retval; |
| } |
| |
| /** |
| * zfcp_ccw_set_offline - set_offline function of zfcp driver |
| * @ccw_device: pointer to belonging ccw device |
| * |
| * This function gets called by the common i/o layer and sets an adapter |
| * into state offline. Setting an fcp device offline means that it will be |
| * unregistered from the SCSI stack and that the adapter will be shut down |
| * asynchronously. |
| */ |
| static int |
| zfcp_ccw_set_offline(struct ccw_device *ccw_device) |
| { |
| struct zfcp_adapter *adapter; |
| |
| down(&zfcp_data.config_sema); |
| adapter = dev_get_drvdata(&ccw_device->dev); |
| zfcp_erp_adapter_shutdown(adapter, 0); |
| zfcp_erp_wait(adapter); |
| zfcp_adapter_scsi_unregister(adapter); |
| zfcp_erp_thread_kill(adapter); |
| zfcp_adapter_debug_unregister(adapter); |
| up(&zfcp_data.config_sema); |
| return 0; |
| } |
| |
| /** |
| * zfcp_ccw_notify |
| * @ccw_device: pointer to belonging ccw device |
| * @event: indicates if adapter was detached or attached |
| * |
| * This function gets called by the common i/o layer if an adapter has gone |
| * or reappeared. |
| */ |
| static int |
| zfcp_ccw_notify(struct ccw_device *ccw_device, int event) |
| { |
| struct zfcp_adapter *adapter; |
| |
| down(&zfcp_data.config_sema); |
| adapter = dev_get_drvdata(&ccw_device->dev); |
| switch (event) { |
| case CIO_GONE: |
| ZFCP_LOG_NORMAL("adapter %s: device gone\n", |
| zfcp_get_busid_by_adapter(adapter)); |
| debug_text_event(adapter->erp_dbf,1,"dev_gone"); |
| zfcp_erp_adapter_shutdown(adapter, 0); |
| break; |
| case CIO_NO_PATH: |
| ZFCP_LOG_NORMAL("adapter %s: no path\n", |
| zfcp_get_busid_by_adapter(adapter)); |
| debug_text_event(adapter->erp_dbf,1,"no_path"); |
| zfcp_erp_adapter_shutdown(adapter, 0); |
| break; |
| case CIO_OPER: |
| ZFCP_LOG_NORMAL("adapter %s: operational again\n", |
| zfcp_get_busid_by_adapter(adapter)); |
| debug_text_event(adapter->erp_dbf,1,"dev_oper"); |
| zfcp_erp_modify_adapter_status(adapter, |
| ZFCP_STATUS_COMMON_RUNNING, |
| ZFCP_SET); |
| zfcp_erp_adapter_reopen(adapter, |
| ZFCP_STATUS_COMMON_ERP_FAILED); |
| break; |
| } |
| zfcp_erp_wait(adapter); |
| up(&zfcp_data.config_sema); |
| return 1; |
| } |
| |
| /** |
| * zfcp_ccw_register - ccw register function |
| * |
| * Registers the driver at the common i/o layer. This function will be called |
| * at module load time/system start. |
| */ |
| int __init |
| zfcp_ccw_register(void) |
| { |
| int retval; |
| |
| retval = ccw_driver_register(&zfcp_ccw_driver); |
| if (retval) |
| goto out; |
| retval = zfcp_sysfs_driver_create_files(&zfcp_ccw_driver.driver); |
| if (retval) |
| ccw_driver_unregister(&zfcp_ccw_driver); |
| out: |
| return retval; |
| } |
| |
| /** |
| * zfcp_ccw_unregister - ccw unregister function |
| * |
| * Unregisters the driver from common i/o layer. Function will be called at |
| * module unload/system shutdown. |
| */ |
| void __exit |
| zfcp_ccw_unregister(void) |
| { |
| zfcp_sysfs_driver_remove_files(&zfcp_ccw_driver.driver); |
| ccw_driver_unregister(&zfcp_ccw_driver); |
| } |
| |
| /** |
| * zfcp_ccw_shutdown - gets called on reboot/shutdown |
| * |
| * Makes sure that QDIO queues are down when the system gets stopped. |
| */ |
| static void |
| zfcp_ccw_shutdown(struct device *dev) |
| { |
| struct zfcp_adapter *adapter; |
| |
| down(&zfcp_data.config_sema); |
| adapter = dev_get_drvdata(dev); |
| zfcp_erp_adapter_shutdown(adapter, 0); |
| zfcp_erp_wait(adapter); |
| up(&zfcp_data.config_sema); |
| } |
| |
| #undef ZFCP_LOG_AREA |