[ALSA] emu10k1 - Use enum for emu_model types
Use enum instead of digits for emu_model types.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index 54b978e..7e46325 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -725,15 +725,18 @@
/* Return to Audio Dock programming mode */
snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware\n");
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_AUDIODOCK );
- if (emu->card_capabilities->emu_model == 1) {
+ if (emu->card_capabilities->emu_model ==
+ EMU_MODEL_EMU1010) {
if ((err = snd_emu1010_load_firmware(emu, DOCK_FILENAME)) != 0) {
continue;
}
- } else if (emu->card_capabilities->emu_model == 2) {
+ } else if (emu->card_capabilities->emu_model ==
+ EMU_MODEL_EMU1010B) {
if ((err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME)) != 0) {
continue;
}
- } else if (emu->card_capabilities->emu_model == 3) {
+ } else if (emu->card_capabilities->emu_model ==
+ EMU_MODEL_EMU1616) {
if ((err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME)) != 0) {
continue;
}
@@ -845,16 +848,16 @@
}
snd_printk(KERN_INFO "emu1010: EMU_HANA_ID=0x%x\n",reg);
switch (emu->card_capabilities->emu_model) {
- case 1:
+ case EMU_MODEL_EMU1010:
filename = HANA_FILENAME;
break;
- case 2:
+ case EMU_MODEL_EMU1010B:
filename = EMU1010B_FILENAME;
break;
- case 3:
+ case EMU_MODEL_EMU1616:
filename = EMU1010_NOTEBOOK_FILENAME;
break;
- case 4:
+ case EMU_MODEL_EMU0404:
filename = EMU0404_FILENAME;
break;
default:
@@ -1103,7 +1106,7 @@
EMU_DST_HANA_SPDIF_RIGHT1, EMU_SRC_ALICE_EMU32A + 3); /* ALICE2 bus 0xb3 */
#endif
/* Default outputs */
- if (emu->card_capabilities->emu_model == 3) {
+ if (emu->card_capabilities->emu_model == EMU_MODEL_EMU1616) {
/* 1616(M) cardbus default outputs */
/* ALICE2 bus 0xa0 */
snd_emu1010_fpga_link_dst_src_write(emu,
@@ -1250,7 +1253,7 @@
}
snd_emu10k1_free_efx(emu);
}
- if (emu->card_capabilities->emu_model == 1) {
+ if (emu->card_capabilities->emu_model == EMU_MODEL_EMU1010) {
/* Disable 48Volt power to Audio Dock */
snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0 );
}
@@ -1394,7 +1397,7 @@
.emu10k2_chip = 1,
.ca0102_chip = 1,
.spk71 = 1,
- .emu_model = 4} , /* EMU 0404 */
+ .emu_model = EMU_MODEL_EMU0404} , /* EMU 0404 */
/* Tested by James@superbug.co.uk 4th Nov 2007. */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x42011102,
.driver = "Audigy2", .name = "E-mu 1010 Notebook [MAEM8950]",
@@ -1403,7 +1406,7 @@
.ca0108_chip = 1,
.ca_cardbus_chip = 1,
.spk71 = 1 ,
- .emu_model = 3} ,
+ .emu_model = EMU_MODEL_EMU1616},
/* Tested by James@superbug.co.uk 4th Nov 2007. */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40041102,
.driver = "Audigy2", .name = "E-mu 1010b PCI [MAEM????]",
@@ -1411,7 +1414,7 @@
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1,
- .emu_model = 2} ,
+ .emu_model = EMU_MODEL_EMU1010B},
/* Tested by James@superbug.co.uk 8th July 2005. */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102,
.driver = "Audigy2", .name = "E-mu 1010 [4001]",
@@ -1419,7 +1422,7 @@
.emu10k2_chip = 1,
.ca0102_chip = 1,
.spk71 = 1,
- .emu_model = 1} , /* Emu 1010 */
+ .emu_model = EMU_MODEL_EMU1010} , /* Emu 1010 */
/* Audigy4 (Not PRO) SB0610 */
{.vendor = 0x1102, .device = 0x0008,
.driver = "Audigy2", .name = "Audigy 2 Value [Unknown]",