IB/ipath: Support larger IB_QP_MAX_DEST_RD_ATOMIC and IB_QP_MAX_QP_RD_ATOMIC
This patch adds support for multiple RDMA reads and atomics to be sent
before an ACK is required to be seen by the requester.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c
index 64f07b1..c122fea 100644
--- a/drivers/infiniband/hw/ipath/ipath_qp.c
+++ b/drivers/infiniband/hw/ipath/ipath_qp.c
@@ -320,7 +320,8 @@
qp->remote_qpn = 0;
qp->qkey = 0;
qp->qp_access_flags = 0;
- clear_bit(IPATH_S_BUSY, &qp->s_flags);
+ qp->s_busy = 0;
+ qp->s_flags &= ~IPATH_S_SIGNAL_REQ_WR;
qp->s_hdrwords = 0;
qp->s_psn = 0;
qp->r_psn = 0;
@@ -333,7 +334,6 @@
qp->r_state = IB_OPCODE_UC_SEND_LAST;
}
qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
- qp->r_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
qp->r_nak_state = 0;
qp->r_wrid_valid = 0;
qp->s_rnr_timeout = 0;
@@ -344,6 +344,10 @@
qp->s_ssn = 1;
qp->s_lsn = 0;
qp->s_wait_credit = 0;
+ memset(qp->s_ack_queue, 0, sizeof(qp->s_ack_queue));
+ qp->r_head_ack_queue = 0;
+ qp->s_tail_ack_queue = 0;
+ qp->s_num_rd_atomic = 0;
if (qp->r_rq.wq) {
qp->r_rq.wq->head = 0;
qp->r_rq.wq->tail = 0;
@@ -503,6 +507,10 @@
attr->path_mig_state != IB_MIG_REARM)
goto inval;
+ if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)
+ if (attr->max_dest_rd_atomic > IPATH_MAX_RDMA_ATOMIC)
+ goto inval;
+
switch (new_state) {
case IB_QPS_RESET:
ipath_reset_qp(qp);
@@ -559,6 +567,12 @@
if (attr_mask & IB_QP_QKEY)
qp->qkey = attr->qkey;
+ if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)
+ qp->r_max_rd_atomic = attr->max_dest_rd_atomic;
+
+ if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC)
+ qp->s_max_rd_atomic = attr->max_rd_atomic;
+
qp->state = new_state;
spin_unlock_irqrestore(&qp->s_lock, flags);
@@ -598,8 +612,8 @@
attr->alt_pkey_index = 0;
attr->en_sqd_async_notify = 0;
attr->sq_draining = 0;
- attr->max_rd_atomic = 1;
- attr->max_dest_rd_atomic = 1;
+ attr->max_rd_atomic = qp->s_max_rd_atomic;
+ attr->max_dest_rd_atomic = qp->r_max_rd_atomic;
attr->min_rnr_timer = qp->r_min_rnr_timer;
attr->port_num = 1;
attr->timeout = qp->timeout;
@@ -614,7 +628,7 @@
init_attr->recv_cq = qp->ibqp.recv_cq;
init_attr->srq = qp->ibqp.srq;
init_attr->cap = attr->cap;
- if (qp->s_flags & (1 << IPATH_S_SIGNAL_REQ_WR))
+ if (qp->s_flags & IPATH_S_SIGNAL_REQ_WR)
init_attr->sq_sig_type = IB_SIGNAL_REQ_WR;
else
init_attr->sq_sig_type = IB_SIGNAL_ALL_WR;
@@ -786,7 +800,7 @@
qp->s_size = init_attr->cap.max_send_wr + 1;
qp->s_max_sge = init_attr->cap.max_send_sge;
if (init_attr->sq_sig_type == IB_SIGNAL_REQ_WR)
- qp->s_flags = 1 << IPATH_S_SIGNAL_REQ_WR;
+ qp->s_flags = IPATH_S_SIGNAL_REQ_WR;
else
qp->s_flags = 0;
dev = to_idev(ibpd->device);