staging:iio:meter remove stubs from ade7759.
General cleanup and use of standard functions to simplfy some spi reads
as well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c
index fafc3c1..a9d3203 100644
--- a/drivers/staging/iio/meter/ade7759.c
+++ b/drivers/staging/iio/meter/ade7759.c
@@ -23,7 +23,7 @@
#include "meter.h"
#include "ade7759.h"
-int ade7759_spi_write_reg_8(struct device *dev,
+static int ade7759_spi_write_reg_8(struct device *dev,
u8 reg_address,
u8 val)
{
@@ -46,25 +46,14 @@
u16 value)
{
int ret;
- struct spi_message msg;
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct ade7759_state *st = iio_dev_get_devdata(indio_dev);
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 3,
- }
- };
mutex_lock(&st->buf_lock);
st->tx[0] = ADE7759_WRITE_REG(reg_address);
st->tx[1] = (value >> 8) & 0xFF;
st->tx[2] = value & 0xFF;
-
- spi_message_init(&msg);
- spi_message_add_tail(xfers, &msg);
- ret = spi_sync(st->us, &msg);
+ ret = spi_write(st->us, st->tx, 3);
mutex_unlock(&st->buf_lock);
return ret;
@@ -74,73 +63,40 @@
u8 reg_address,
u8 *val)
{
- struct spi_message msg;
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct ade7759_state *st = iio_dev_get_devdata(indio_dev);
int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = 2,
- },
- };
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADE7759_READ_REG(reg_address);
- st->tx[1] = 0;
-
- spi_message_init(&msg);
- spi_message_add_tail(xfers, &msg);
- ret = spi_sync(st->us, &msg);
- if (ret) {
+ ret = spi_w8r8(st->us, ADE7759_READ_REG(reg_address));
+ if (ret < 0) {
dev_err(&st->us->dev, "problem when reading 8 bit register 0x%02X",
reg_address);
- goto error_ret;
+ return ret;
}
- *val = st->rx[1];
+ *val = ret;
-error_ret:
- mutex_unlock(&st->buf_lock);
- return ret;
+ return 0;
}
static int ade7759_spi_read_reg_16(struct device *dev,
u8 reg_address,
u16 *val)
{
- struct spi_message msg;
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct ade7759_state *st = iio_dev_get_devdata(indio_dev);
int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = 3,
- },
- };
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADE7759_READ_REG(reg_address);
- st->tx[1] = 0;
- st->tx[2] = 0;
-
- spi_message_init(&msg);
- spi_message_add_tail(xfers, &msg);
- ret = spi_sync(st->us, &msg);
- if (ret) {
+ ret = spi_w8r16(st->us, ADE7759_READ_REG(reg_address));
+ if (ret < 0) {
dev_err(&st->us->dev, "problem when reading 16 bit register 0x%02X",
- reg_address);
- goto error_ret;
+ reg_address);
+ return ret;
}
- *val = (st->rx[1] << 8) | st->rx[2];
-error_ret:
- mutex_unlock(&st->buf_lock);
- return ret;
+ *val = ret;
+ *val = be16_to_cpup(val);
+
+ return 0;
}
static int ade7759_spi_read_reg_40(struct device *dev,
@@ -354,27 +310,22 @@
irqen &= ~(1 << 3);
ret = ade7759_spi_write_reg_8(dev, ADE7759_IRQEN, irqen);
- if (ret)
- goto error_ret;
error_ret:
return ret;
}
/* Power down the device */
-int ade7759_stop_device(struct device *dev)
+static int ade7759_stop_device(struct device *dev)
{
- int ret;
u16 val;
+
ade7759_spi_read_reg_16(dev,
ADE7759_MODE,
&val);
val |= 1 << 4; /* AD converters can be turned off */
- ret = ade7759_spi_write_reg_16(dev,
- ADE7759_MODE,
- val);
- return ret;
+ return ade7759_spi_write_reg_16(dev, ADE7759_MODE, val);
}
static int ade7759_initial_setup(struct ade7759_state *st)
@@ -404,7 +355,7 @@
struct device_attribute *attr,
char *buf)
{
- int ret, len = 0;
+ int ret;
u16 t;
int sps;
ret = ade7759_spi_read_reg_16(dev,
@@ -416,8 +367,7 @@
t = (t >> 3) & 0x3;
sps = 27900 / (1 + t);
- len = sprintf(buf, "%d SPS\n", sps);
- return len;
+ return sprintf(buf, "%d\n", sps);
}
static ssize_t ade7759_write_frequency(struct device *dev,
@@ -446,18 +396,14 @@
else
st->us->max_speed_hz = ADE7759_SPI_FAST;
- ret = ade7759_spi_read_reg_16(dev,
- ADE7759_MODE,
- ®);
+ ret = ade7759_spi_read_reg_16(dev, ADE7759_MODE, ®);
if (ret)
goto out;
reg &= ~(3 << 13);
reg |= t << 13;
- ret = ade7759_spi_write_reg_16(dev,
- ADE7759_MODE,
- reg);
+ ret = ade7759_spi_write_reg_16(dev, ADE7759_MODE, reg);
out:
mutex_unlock(&indio_dev->mlock);
@@ -478,14 +424,6 @@
static IIO_CONST_ATTR(name, "ade7759");
-static struct attribute *ade7759_event_attributes[] = {
- NULL
-};
-
-static struct attribute_group ade7759_event_attribute_group = {
- .attrs = ade7759_event_attributes,
-};
-
static struct attribute *ade7759_attributes[] = {
&iio_dev_attr_temp_raw.dev_attr.attr,
&iio_const_attr_temp_offset.dev_attr.attr,
@@ -517,7 +455,7 @@
static int __devinit ade7759_probe(struct spi_device *spi)
{
- int ret, regdone = 0;
+ int ret;
struct ade7759_state *st = kzalloc(sizeof *st, GFP_KERNEL);
if (!st) {
ret = -ENOMEM;
@@ -548,62 +486,27 @@
st->indio_dev->dev.parent = &spi->dev;
st->indio_dev->num_interrupt_lines = 1;
- st->indio_dev->event_attrs = &ade7759_event_attribute_group;
+
st->indio_dev->attrs = &ade7759_attribute_group;
st->indio_dev->dev_data = (void *)(st);
st->indio_dev->driver_module = THIS_MODULE;
st->indio_dev->modes = INDIO_DIRECT_MODE;
- ret = ade7759_configure_ring(st->indio_dev);
- if (ret)
- goto error_free_dev;
-
ret = iio_device_register(st->indio_dev);
if (ret)
- goto error_unreg_ring_funcs;
- regdone = 1;
-
- ret = ade7759_initialize_ring(st->indio_dev->ring);
- if (ret) {
- printk(KERN_ERR "failed to initialize the ring\n");
- goto error_unreg_ring_funcs;
- }
-
- if (spi->irq) {
- ret = iio_register_interrupt_line(spi->irq,
- st->indio_dev,
- 0,
- IRQF_TRIGGER_FALLING,
- "ade7759");
- if (ret)
- goto error_uninitialize_ring;
-
- ret = ade7759_probe_trigger(st->indio_dev);
- if (ret)
- goto error_unregister_line;
- }
+ goto error_free_dev;
/* Get the device into a sane initial state */
ret = ade7759_initial_setup(st);
if (ret)
- goto error_remove_trigger;
+ goto error_unreg_dev;
return 0;
-error_remove_trigger:
- if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
- ade7759_remove_trigger(st->indio_dev);
-error_unregister_line:
- if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
- iio_unregister_interrupt_line(st->indio_dev, 0);
-error_uninitialize_ring:
- ade7759_uninitialize_ring(st->indio_dev->ring);
-error_unreg_ring_funcs:
- ade7759_unconfigure_ring(st->indio_dev);
+
+error_unreg_dev:
+ iio_device_unregister(st->indio_dev);
error_free_dev:
- if (regdone)
- iio_device_unregister(st->indio_dev);
- else
- iio_free_device(st->indio_dev);
+ iio_free_device(st->indio_dev);
error_free_tx:
kfree(st->tx);
error_free_rx:
@@ -625,14 +528,6 @@
if (ret)
goto err_ret;
- flush_scheduled_work();
-
- ade7759_remove_trigger(indio_dev);
- if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
- iio_unregister_interrupt_line(indio_dev, 0);
-
- ade7759_uninitialize_ring(indio_dev->ring);
- ade7759_unconfigure_ring(indio_dev);
iio_device_unregister(indio_dev);
kfree(st->tx);
kfree(st->rx);
diff --git a/drivers/staging/iio/meter/ade7759.h b/drivers/staging/iio/meter/ade7759.h
index 813dea2..e9d1c43 100644
--- a/drivers/staging/iio/meter/ade7759.h
+++ b/drivers/staging/iio/meter/ade7759.h
@@ -41,82 +41,17 @@
/**
* struct ade7759_state - device instance specific data
* @us: actual spi_device
- * @work_trigger_to_ring: bh for triggered event handling
- * @inter: used to check if new interrupt has been triggered
- * @last_timestamp: passing timestamp from th to bh of interrupt handler
* @indio_dev: industrial I/O device structure
- * @trig: data ready trigger registered with iio
* @tx: transmit buffer
* @rx: recieve buffer
* @buf_lock: mutex to protect tx and rx
**/
struct ade7759_state {
struct spi_device *us;
- struct work_struct work_trigger_to_ring;
- s64 last_timestamp;
struct iio_dev *indio_dev;
- struct iio_trigger *trig;
u8 *tx;
u8 *rx;
struct mutex buf_lock;
};
-#if defined(CONFIG_IIO_RING_BUFFER) && defined(THIS_HAS_RING_BUFFER_SUPPORT)
-/* At the moment triggers are only used for ring buffer
- * filling. This may change!
- */
-
-enum ade7759_scan {
- ADE7759_SCAN_ACTIVE_POWER,
- ADE7759_SCAN_CH1_CH2,
- ADE7759_SCAN_CH1,
- ADE7759_SCAN_CH2,
-};
-
-void ade7759_remove_trigger(struct iio_dev *indio_dev);
-int ade7759_probe_trigger(struct iio_dev *indio_dev);
-
-ssize_t ade7759_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf);
-
-
-int ade7759_configure_ring(struct iio_dev *indio_dev);
-void ade7759_unconfigure_ring(struct iio_dev *indio_dev);
-
-int ade7759_initialize_ring(struct iio_ring_buffer *ring);
-void ade7759_uninitialize_ring(struct iio_ring_buffer *ring);
-#else /* CONFIG_IIO_RING_BUFFER */
-
-static inline void ade7759_remove_trigger(struct iio_dev *indio_dev)
-{
-}
-static inline int ade7759_probe_trigger(struct iio_dev *indio_dev)
-{
- return 0;
-}
-
-static inline ssize_t
-ade7759_read_data_from_ring(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return 0;
-}
-
-static int ade7759_configure_ring(struct iio_dev *indio_dev)
-{
- return 0;
-}
-static inline void ade7759_unconfigure_ring(struct iio_dev *indio_dev)
-{
-}
-static inline int ade7759_initialize_ring(struct iio_ring_buffer *ring)
-{
- return 0;
-}
-static inline void ade7759_uninitialize_ring(struct iio_ring_buffer *ring)
-{
-}
-#endif /* CONFIG_IIO_RING_BUFFER */
#endif