| /* |
| * Copyright (C) 2013 Emilio López <emilio@elopez.com.ar> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Adjustable factor-based clock implementation |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| |
| #include "clk-factors.h" |
| |
| /* |
| * DOC: basic adjustable factor-based clock |
| * |
| * Traits of this clock: |
| * prepare - clk_prepare only ensures that parents are prepared |
| * enable - clk_enable only ensures that parents are enabled |
| * rate - rate is adjustable. |
| * clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1) |
| * parent - fixed parent. No clk_set_parent support |
| */ |
| |
| #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) |
| |
| #define FACTORS_MAX_PARENTS 5 |
| |
| #define SETMASK(len, pos) (((1U << (len)) - 1) << (pos)) |
| #define CLRMASK(len, pos) (~(SETMASK(len, pos))) |
| #define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit)) |
| |
| #define FACTOR_SET(bit, len, reg, val) \ |
| (((reg) & CLRMASK(len, bit)) | (val << (bit))) |
| |
| static unsigned long clk_factors_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| u8 n = 1, k = 0, p = 0, m = 0; |
| u32 reg; |
| unsigned long rate; |
| struct clk_factors *factors = to_clk_factors(hw); |
| struct clk_factors_config *config = factors->config; |
| |
| /* Fetch the register value */ |
| reg = readl(factors->reg); |
| |
| /* Get each individual factor if applicable */ |
| if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE) |
| n = FACTOR_GET(config->nshift, config->nwidth, reg); |
| if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE) |
| k = FACTOR_GET(config->kshift, config->kwidth, reg); |
| if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE) |
| m = FACTOR_GET(config->mshift, config->mwidth, reg); |
| if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE) |
| p = FACTOR_GET(config->pshift, config->pwidth, reg); |
| |
| /* Calculate the rate */ |
| rate = (parent_rate * (n + config->n_start) * (k + 1) >> p) / (m + 1); |
| |
| return rate; |
| } |
| |
| static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| struct clk_factors *factors = to_clk_factors(hw); |
| factors->get_factors((u32 *)&rate, (u32)*parent_rate, |
| NULL, NULL, NULL, NULL); |
| |
| return rate; |
| } |
| |
| static long clk_factors_determine_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *best_parent_rate, |
| struct clk **best_parent_p) |
| { |
| struct clk *clk = hw->clk, *parent, *best_parent = NULL; |
| int i, num_parents; |
| unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0; |
| |
| /* find the parent that can help provide the fastest rate <= rate */ |
| num_parents = __clk_get_num_parents(clk); |
| for (i = 0; i < num_parents; i++) { |
| parent = clk_get_parent_by_index(clk, i); |
| if (!parent) |
| continue; |
| if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT) |
| parent_rate = __clk_round_rate(parent, rate); |
| else |
| parent_rate = __clk_get_rate(parent); |
| |
| child_rate = clk_factors_round_rate(hw, rate, &parent_rate); |
| |
| if (child_rate <= rate && child_rate > best_child_rate) { |
| best_parent = parent; |
| best = parent_rate; |
| best_child_rate = child_rate; |
| } |
| } |
| |
| if (best_parent) |
| *best_parent_p = best_parent; |
| *best_parent_rate = best; |
| |
| return best_child_rate; |
| } |
| |
| static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| u8 n = 0, k = 0, m = 0, p = 0; |
| u32 reg; |
| struct clk_factors *factors = to_clk_factors(hw); |
| struct clk_factors_config *config = factors->config; |
| unsigned long flags = 0; |
| |
| factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p); |
| |
| if (factors->lock) |
| spin_lock_irqsave(factors->lock, flags); |
| |
| /* Fetch the register value */ |
| reg = readl(factors->reg); |
| |
| /* Set up the new factors - macros do not do anything if width is 0 */ |
| reg = FACTOR_SET(config->nshift, config->nwidth, reg, n); |
| reg = FACTOR_SET(config->kshift, config->kwidth, reg, k); |
| reg = FACTOR_SET(config->mshift, config->mwidth, reg, m); |
| reg = FACTOR_SET(config->pshift, config->pwidth, reg, p); |
| |
| /* Apply them now */ |
| writel(reg, factors->reg); |
| |
| /* delay 500us so pll stabilizes */ |
| __delay((rate >> 20) * 500 / 2); |
| |
| if (factors->lock) |
| spin_unlock_irqrestore(factors->lock, flags); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops clk_factors_ops = { |
| .determine_rate = clk_factors_determine_rate, |
| .recalc_rate = clk_factors_recalc_rate, |
| .round_rate = clk_factors_round_rate, |
| .set_rate = clk_factors_set_rate, |
| }; |
| |
| struct clk * __init sunxi_factors_register(struct device_node *node, |
| const struct factors_data *data, |
| spinlock_t *lock) |
| { |
| struct clk *clk; |
| struct clk_factors *factors; |
| struct clk_gate *gate = NULL; |
| struct clk_mux *mux = NULL; |
| struct clk_hw *gate_hw = NULL; |
| struct clk_hw *mux_hw = NULL; |
| const char *clk_name = node->name; |
| const char *parents[FACTORS_MAX_PARENTS]; |
| void __iomem *reg; |
| int i = 0; |
| |
| reg = of_iomap(node, 0); |
| |
| /* if we have a mux, we will have >1 parents */ |
| while (i < FACTORS_MAX_PARENTS && |
| (parents[i] = of_clk_get_parent_name(node, i)) != NULL) |
| i++; |
| |
| /* |
| * some factor clocks, such as pll5 and pll6, may have multiple |
| * outputs, and have their name designated in factors_data |
| */ |
| if (data->name) |
| clk_name = data->name; |
| else |
| of_property_read_string(node, "clock-output-names", &clk_name); |
| |
| factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); |
| if (!factors) |
| return NULL; |
| |
| /* set up factors properties */ |
| factors->reg = reg; |
| factors->config = data->table; |
| factors->get_factors = data->getter; |
| factors->lock = lock; |
| |
| /* Add a gate if this factor clock can be gated */ |
| if (data->enable) { |
| gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); |
| if (!gate) { |
| kfree(factors); |
| return NULL; |
| } |
| |
| /* set up gate properties */ |
| gate->reg = reg; |
| gate->bit_idx = data->enable; |
| gate->lock = factors->lock; |
| gate_hw = &gate->hw; |
| } |
| |
| /* Add a mux if this factor clock can be muxed */ |
| if (data->mux) { |
| mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); |
| if (!mux) { |
| kfree(factors); |
| kfree(gate); |
| return NULL; |
| } |
| |
| /* set up gate properties */ |
| mux->reg = reg; |
| mux->shift = data->mux; |
| mux->mask = SUNXI_FACTORS_MUX_MASK; |
| mux->lock = factors->lock; |
| mux_hw = &mux->hw; |
| } |
| |
| clk = clk_register_composite(NULL, clk_name, |
| parents, i, |
| mux_hw, &clk_mux_ops, |
| &factors->hw, &clk_factors_ops, |
| gate_hw, &clk_gate_ops, 0); |
| |
| if (!IS_ERR(clk)) { |
| of_clk_add_provider(node, of_clk_src_simple_get, clk); |
| clk_register_clkdev(clk, clk_name, NULL); |
| } |
| |
| return clk; |
| } |