| /** |
| * This file contains functions used in USB interface module. |
| */ |
| #include <linux/delay.h> |
| #include <linux/firmware.h> |
| #include <linux/netdevice.h> |
| #include <linux/usb.h> |
| |
| #include "host.h" |
| #include "sbi.h" |
| #include "decl.h" |
| #include "defs.h" |
| #include "dev.h" |
| #include "if_usb.h" |
| |
| #define MESSAGE_HEADER_LEN 4 |
| |
| static const char usbdriver_name[] = "usb8xxx"; |
| |
| #define MAX_DEVS 5 |
| static struct net_device *libertas_devs[MAX_DEVS]; |
| static int libertas_found = 0; |
| |
| static struct usb_device_id if_usb_table[] = { |
| /* Enter the device signature inside */ |
| { USB_DEVICE(0x1286, 0x2001) }, |
| { USB_DEVICE(0x05a3, 0x8388) }, |
| {} /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, if_usb_table); |
| |
| static void if_usb_receive(struct urb *urb); |
| static void if_usb_receive_fwload(struct urb *urb); |
| static int reset_device(wlan_private *priv); |
| |
| /** |
| * @brief call back function to handle the status of the URB |
| * @param urb pointer to urb structure |
| * @return N/A |
| */ |
| static void if_usb_write_bulk_callback(struct urb *urb) |
| { |
| wlan_private *priv = (wlan_private *) (urb->context); |
| wlan_adapter *adapter = priv->adapter; |
| struct net_device *dev = priv->wlan_dev.netdev; |
| |
| /* handle the transmission complete validations */ |
| |
| if (urb->status != 0) { |
| /* print the failure status number for debug */ |
| lbs_pr_info("URB in failure status\n"); |
| } else { |
| /* |
| lbs_deb_usbd(&urb->dev->dev, "URB status is successfull\n"); |
| lbs_deb_usbd(&urb->dev->dev, "Actual length transmitted %d\n", |
| urb->actual_length); |
| */ |
| priv->wlan_dev.dnld_sent = DNLD_RES_RECEIVED; |
| /* Wake main thread if commands are pending */ |
| if (!adapter->cur_cmd) |
| wake_up_interruptible(&priv->mainthread.waitq); |
| if ((adapter->connect_status == libertas_connected)) |
| netif_wake_queue(dev); |
| } |
| |
| return; |
| } |
| |
| /** |
| * @brief free tx/rx urb, skb and rx buffer |
| * @param cardp pointer usb_card_rec |
| * @return N/A |
| */ |
| void if_usb_free(struct usb_card_rec *cardp) |
| { |
| lbs_deb_enter(LBS_DEB_USB); |
| |
| /* Unlink tx & rx urb */ |
| usb_kill_urb(cardp->tx_urb); |
| usb_kill_urb(cardp->rx_urb); |
| |
| usb_free_urb(cardp->tx_urb); |
| cardp->tx_urb = NULL; |
| |
| usb_free_urb(cardp->rx_urb); |
| cardp->rx_urb = NULL; |
| |
| kfree(cardp->bulk_out_buffer); |
| cardp->bulk_out_buffer = NULL; |
| |
| lbs_deb_leave(LBS_DEB_USB); |
| } |
| |
| /** |
| * @brief sets the configuration values |
| * @param ifnum interface number |
| * @param id pointer to usb_device_id |
| * @return 0 on success, error code on failure |
| */ |
| static int if_usb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *udev; |
| struct usb_host_interface *iface_desc; |
| struct usb_endpoint_descriptor *endpoint; |
| wlan_private *priv; |
| struct usb_card_rec *usb_cardp; |
| int i; |
| |
| udev = interface_to_usbdev(intf); |
| |
| usb_cardp = kzalloc(sizeof(struct usb_card_rec), GFP_KERNEL); |
| if (!usb_cardp) { |
| lbs_pr_err("Out of memory allocating private data.\n"); |
| goto error; |
| } |
| |
| usb_cardp->udev = udev; |
| iface_desc = intf->cur_altsetting; |
| |
| lbs_deb_usbd(&udev->dev, "bcdUSB = 0x%X bDeviceClass = 0x%X" |
| " bDeviceSubClass = 0x%X, bDeviceProtocol = 0x%X\n", |
| udev->descriptor.bcdUSB, |
| udev->descriptor.bDeviceClass, |
| udev->descriptor.bDeviceSubClass, |
| udev->descriptor.bDeviceProtocol); |
| |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { |
| endpoint = &iface_desc->endpoint[i].desc; |
| if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) |
| && ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == |
| USB_ENDPOINT_XFER_BULK)) { |
| /* we found a bulk in endpoint */ |
| lbs_deb_usbd(&udev->dev, "Bulk in size is %d\n", |
| endpoint->wMaxPacketSize); |
| if (! |
| (usb_cardp->rx_urb = |
| usb_alloc_urb(0, GFP_KERNEL))) { |
| lbs_deb_usbd(&udev->dev, |
| "Rx URB allocation failed\n"); |
| goto dealloc; |
| } |
| usb_cardp->rx_urb_recall = 0; |
| |
| usb_cardp->bulk_in_size = |
| endpoint->wMaxPacketSize; |
| usb_cardp->bulk_in_endpointAddr = |
| (endpoint-> |
| bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); |
| lbs_deb_usbd(&udev->dev, "in_endpoint = %d\n", |
| endpoint->bEndpointAddress); |
| } |
| |
| if (((endpoint-> |
| bEndpointAddress & USB_ENDPOINT_DIR_MASK) == |
| USB_DIR_OUT) |
| && ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == |
| USB_ENDPOINT_XFER_BULK)) { |
| /* We found bulk out endpoint */ |
| if (! |
| (usb_cardp->tx_urb = |
| usb_alloc_urb(0, GFP_KERNEL))) { |
| lbs_deb_usbd(&udev->dev, |
| "Tx URB allocation failed\n"); |
| goto dealloc; |
| } |
| |
| usb_cardp->bulk_out_size = |
| endpoint->wMaxPacketSize; |
| lbs_deb_usbd(&udev->dev, |
| "Bulk out size is %d\n", |
| endpoint->wMaxPacketSize); |
| usb_cardp->bulk_out_endpointAddr = |
| endpoint->bEndpointAddress; |
| lbs_deb_usbd(&udev->dev, "out_endpoint = %d\n", |
| endpoint->bEndpointAddress); |
| usb_cardp->bulk_out_buffer = |
| kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE, |
| GFP_KERNEL); |
| |
| if (!usb_cardp->bulk_out_buffer) { |
| lbs_deb_usbd(&udev->dev, |
| "Could not allocate buffer\n"); |
| goto dealloc; |
| } |
| } |
| } |
| |
| |
| /* At this point wlan_add_card() will be called. Don't worry |
| * about keeping pwlanpriv around since it will be set on our |
| * usb device data in -> add() -> libertas_sbi_register_dev(). |
| */ |
| if (!(priv = wlan_add_card(usb_cardp))) |
| goto dealloc; |
| |
| if (libertas_found < MAX_DEVS) { |
| libertas_devs[libertas_found] = priv->wlan_dev.netdev; |
| libertas_found++; |
| } |
| |
| if (wlan_add_mesh(priv)) |
| goto dealloc; |
| |
| usb_get_dev(udev); |
| usb_set_intfdata(intf, usb_cardp); |
| |
| /* |
| * return card structure, which can be got back in the |
| * diconnect function as the ptr |
| * argument. |
| */ |
| return 0; |
| |
| dealloc: |
| if_usb_free(usb_cardp); |
| |
| error: |
| return -ENOMEM; |
| } |
| |
| /** |
| * @brief free resource and cleanup |
| * @param udev pointer to usb_device |
| * @param ptr pointer to usb_cardp |
| * @return N/A |
| */ |
| static void if_usb_disconnect(struct usb_interface *intf) |
| { |
| struct usb_card_rec *cardp = usb_get_intfdata(intf); |
| wlan_private *priv = (wlan_private *) cardp->priv; |
| wlan_adapter *adapter = NULL; |
| int i; |
| |
| adapter = priv->adapter; |
| |
| /* |
| * Update Surprise removed to TRUE |
| */ |
| adapter->surpriseremoved = 1; |
| |
| for (i = 0; i<libertas_found; i++) { |
| if (libertas_devs[i]==priv->wlan_dev.netdev) { |
| libertas_devs[i] = libertas_devs[--libertas_found]; |
| libertas_devs[libertas_found] = NULL ; |
| break; |
| } |
| } |
| |
| /* card is removed and we can call wlan_remove_card */ |
| lbs_deb_usbd(&cardp->udev->dev, "call remove card\n"); |
| wlan_remove_mesh(priv); |
| wlan_remove_card(priv); |
| |
| /* Unlink and free urb */ |
| if_usb_free(cardp); |
| |
| usb_set_intfdata(intf, NULL); |
| usb_put_dev(interface_to_usbdev(intf)); |
| |
| return; |
| } |
| |
| /** |
| * @brief This function download FW |
| * @param priv pointer to wlan_private |
| * @return 0 |
| */ |
| static int if_prog_firmware(wlan_private * priv) |
| { |
| struct usb_card_rec *cardp = priv->wlan_dev.card; |
| struct FWData *fwdata; |
| struct fwheader *fwheader; |
| u8 *firmware = priv->firmware->data; |
| |
| fwdata = kmalloc(sizeof(struct FWData), GFP_ATOMIC); |
| |
| if (!fwdata) |
| return -1; |
| |
| fwheader = &fwdata->fwheader; |
| |
| if (!cardp->CRC_OK) { |
| cardp->totalbytes = cardp->fwlastblksent; |
| cardp->fwseqnum = cardp->lastseqnum - 1; |
| } |
| |
| /* |
| lbs_deb_usbd(&cardp->udev->dev, "totalbytes = %d\n", |
| cardp->totalbytes); |
| */ |
| |
| memcpy(fwheader, &firmware[cardp->totalbytes], |
| sizeof(struct fwheader)); |
| |
| cardp->fwlastblksent = cardp->totalbytes; |
| cardp->totalbytes += sizeof(struct fwheader); |
| |
| /* lbs_deb_usbd(&cardp->udev->dev,"Copy Data\n"); */ |
| memcpy(fwdata->data, &firmware[cardp->totalbytes], |
| fwdata->fwheader.datalength); |
| |
| /* |
| lbs_deb_usbd(&cardp->udev->dev, |
| "Data length = %d\n", fwdata->fwheader.datalength); |
| */ |
| |
| cardp->fwseqnum = cardp->fwseqnum + 1; |
| |
| fwdata->seqnum = cardp->fwseqnum; |
| cardp->lastseqnum = fwdata->seqnum; |
| cardp->totalbytes += fwdata->fwheader.datalength; |
| |
| if (fwheader->dnldcmd == FW_HAS_DATA_TO_RECV) { |
| /* |
| lbs_deb_usbd(&cardp->udev->dev, "There is data to follow\n"); |
| lbs_deb_usbd(&cardp->udev->dev, |
| "seqnum = %d totalbytes = %d\n", cardp->fwseqnum, |
| cardp->totalbytes); |
| */ |
| memcpy(cardp->bulk_out_buffer, fwheader, FW_DATA_XMIT_SIZE); |
| usb_tx_block(priv, cardp->bulk_out_buffer, FW_DATA_XMIT_SIZE); |
| |
| } else if (fwdata->fwheader.dnldcmd == FW_HAS_LAST_BLOCK) { |
| /* |
| lbs_deb_usbd(&cardp->udev->dev, |
| "Host has finished FW downloading\n"); |
| lbs_deb_usbd(&cardp->udev->dev, |
| "Donwloading FW JUMP BLOCK\n"); |
| */ |
| memcpy(cardp->bulk_out_buffer, fwheader, FW_DATA_XMIT_SIZE); |
| usb_tx_block(priv, cardp->bulk_out_buffer, FW_DATA_XMIT_SIZE); |
| cardp->fwfinalblk = 1; |
| } |
| |
| /* |
| lbs_deb_usbd(&cardp->udev->dev, |
| "The firmware download is done size is %d\n", |
| cardp->totalbytes); |
| */ |
| |
| kfree(fwdata); |
| |
| return 0; |
| } |
| |
| static int libertas_do_reset(wlan_private *priv) |
| { |
| int ret; |
| struct usb_card_rec *cardp = priv->wlan_dev.card; |
| |
| lbs_deb_enter(LBS_DEB_USB); |
| |
| ret = usb_reset_device(cardp->udev); |
| if (!ret) { |
| msleep(10); |
| reset_device(priv); |
| msleep(10); |
| } |
| |
| lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret); |
| |
| return ret; |
| } |
| |
| /** |
| * @brief This function transfer the data to the device. |
| * @param priv pointer to wlan_private |
| * @param payload pointer to payload data |
| * @param nb data length |
| * @return 0 or -1 |
| */ |
| int usb_tx_block(wlan_private * priv, u8 * payload, u16 nb) |
| { |
| /* pointer to card structure */ |
| struct usb_card_rec *cardp = priv->wlan_dev.card; |
| int ret = -1; |
| |
| /* check if device is removed */ |
| if (priv->adapter->surpriseremoved) { |
| lbs_deb_usbd(&cardp->udev->dev, "Device removed\n"); |
| goto tx_ret; |
| } |
| |
| usb_fill_bulk_urb(cardp->tx_urb, cardp->udev, |
| usb_sndbulkpipe(cardp->udev, |
| cardp->bulk_out_endpointAddr), |
| payload, nb, if_usb_write_bulk_callback, priv); |
| |
| cardp->tx_urb->transfer_flags |= URB_ZERO_PACKET; |
| |
| if ((ret = usb_submit_urb(cardp->tx_urb, GFP_ATOMIC))) { |
| /* transfer failed */ |
| lbs_deb_usbd(&cardp->udev->dev, "usb_submit_urb failed\n"); |
| ret = -1; |
| } else { |
| /* lbs_deb_usbd(&cardp->udev->dev, "usb_submit_urb success\n"); */ |
| ret = 0; |
| } |
| |
| tx_ret: |
| return ret; |
| } |
| |
| static int __if_usb_submit_rx_urb(wlan_private * priv, |
| void (*callbackfn) |
| (struct urb *urb)) |
| { |
| struct usb_card_rec *cardp = priv->wlan_dev.card; |
| struct sk_buff *skb; |
| struct read_cb_info *rinfo = &cardp->rinfo; |
| int ret = -1; |
| |
| if (!(skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE))) { |
| lbs_pr_err("No free skb\n"); |
| goto rx_ret; |
| } |
| |
| rinfo->skb = skb; |
| |
| /* Fill the receive configuration URB and initialise the Rx call back */ |
| usb_fill_bulk_urb(cardp->rx_urb, cardp->udev, |
| usb_rcvbulkpipe(cardp->udev, |
| cardp->bulk_in_endpointAddr), |
| (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET), |
| MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, |
| rinfo); |
| |
| cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET; |
| |
| /* lbs_deb_usbd(&cardp->udev->dev, "Pointer for rx_urb %p\n", cardp->rx_urb); */ |
| if ((ret = usb_submit_urb(cardp->rx_urb, GFP_ATOMIC))) { |
| /* handle failure conditions */ |
| lbs_deb_usbd(&cardp->udev->dev, "Submit Rx URB failed\n"); |
| ret = -1; |
| } else { |
| /* lbs_deb_usbd(&cardp->udev->dev, "Submit Rx URB success\n"); */ |
| ret = 0; |
| } |
| |
| rx_ret: |
| return ret; |
| } |
| |
| static inline int if_usb_submit_rx_urb_fwload(wlan_private * priv) |
| { |
| return __if_usb_submit_rx_urb(priv, &if_usb_receive_fwload); |
| } |
| |
| static inline int if_usb_submit_rx_urb(wlan_private * priv) |
| { |
| return __if_usb_submit_rx_urb(priv, &if_usb_receive); |
| } |
| |
| static void if_usb_receive_fwload(struct urb *urb) |
| { |
| struct read_cb_info *rinfo = (struct read_cb_info *)urb->context; |
| wlan_private *priv = rinfo->priv; |
| struct sk_buff *skb = rinfo->skb; |
| struct usb_card_rec *cardp = (struct usb_card_rec *)priv->wlan_dev.card; |
| struct fwsyncheader *syncfwheader; |
| struct bootcmdrespStr bootcmdresp; |
| |
| if (urb->status) { |
| lbs_deb_usbd(&cardp->udev->dev, |
| "URB status is failed during fw load\n"); |
| kfree_skb(skb); |
| return; |
| } |
| |
| if (cardp->bootcmdresp == 0) { |
| memcpy (&bootcmdresp, skb->data + IPFIELD_ALIGN_OFFSET, |
| sizeof(bootcmdresp)); |
| if (cardp->udev->descriptor.bcdDevice < 0x3106) { |
| kfree_skb(skb); |
| if_usb_submit_rx_urb_fwload(priv); |
| cardp->bootcmdresp = 1; |
| lbs_deb_usbd(&cardp->udev->dev, |
| "Received valid boot command response\n"); |
| return; |
| } |
| if (bootcmdresp.u32magicnumber != BOOT_CMD_MAGIC_NUMBER) { |
| lbs_pr_info( |
| "boot cmd response wrong magic number (0x%x)\n", |
| bootcmdresp.u32magicnumber); |
| } else if (bootcmdresp.u8cmd_tag != BOOT_CMD_FW_BY_USB) { |
| lbs_pr_info( |
| "boot cmd response cmd_tag error (%d)\n", |
| bootcmdresp.u8cmd_tag); |
| } else if (bootcmdresp.u8result != BOOT_CMD_RESP_OK) { |
| lbs_pr_info( |
| "boot cmd response result error (%d)\n", |
| bootcmdresp.u8result); |
| } else { |
| cardp->bootcmdresp = 1; |
| lbs_deb_usbd(&cardp->udev->dev, |
| "Received valid boot command response\n"); |
| } |
| kfree_skb(skb); |
| if_usb_submit_rx_urb_fwload(priv); |
| return; |
| } |
| |
| syncfwheader = kmalloc(sizeof(struct fwsyncheader), GFP_ATOMIC); |
| if (!syncfwheader) { |
| lbs_deb_usbd(&cardp->udev->dev, "Failure to allocate syncfwheader\n"); |
| kfree_skb(skb); |
| return; |
| } |
| |
| memcpy(syncfwheader, skb->data + IPFIELD_ALIGN_OFFSET, |
| sizeof(struct fwsyncheader)); |
| |
| if (!syncfwheader->cmd) { |
| /* |
| lbs_deb_usbd(&cardp->udev->dev, |
| "FW received Blk with correct CRC\n"); |
| lbs_deb_usbd(&cardp->udev->dev, |
| "FW received Blk seqnum = %d\n", |
| syncfwheader->seqnum); |
| */ |
| cardp->CRC_OK = 1; |
| } else { |
| lbs_deb_usbd(&cardp->udev->dev, |
| "FW received Blk with CRC error\n"); |
| cardp->CRC_OK = 0; |
| } |
| |
| kfree_skb(skb); |
| |
| if (cardp->fwfinalblk) { |
| cardp->fwdnldover = 1; |
| goto exit; |
| } |
| |
| if_prog_firmware(priv); |
| |
| if_usb_submit_rx_urb_fwload(priv); |
| exit: |
| kfree(syncfwheader); |
| |
| return; |
| |
| } |
| |
| #define MRVDRV_MIN_PKT_LEN 30 |
| |
| static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb, |
| struct usb_card_rec *cardp, |
| wlan_private *priv) |
| { |
| if (recvlength > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + |
| MESSAGE_HEADER_LEN || recvlength < MRVDRV_MIN_PKT_LEN) { |
| lbs_deb_usbd(&cardp->udev->dev, |
| "Packet length is Invalid\n"); |
| kfree_skb(skb); |
| return; |
| } |
| |
| skb_reserve(skb, IPFIELD_ALIGN_OFFSET); |
| skb_put(skb, recvlength); |
| skb_pull(skb, MESSAGE_HEADER_LEN); |
| libertas_process_rxed_packet(priv, skb); |
| priv->wlan_dev.upld_len = (recvlength - MESSAGE_HEADER_LEN); |
| } |
| |
| static inline void process_cmdrequest(int recvlength, u8 *recvbuff, |
| struct sk_buff *skb, |
| struct usb_card_rec *cardp, |
| wlan_private *priv) |
| { |
| u8 *cmdbuf; |
| if (recvlength > MRVDRV_SIZE_OF_CMD_BUFFER) { |
| lbs_deb_usbd(&cardp->udev->dev, |
| "The receive buffer is too large\n"); |
| kfree_skb(skb); |
| return; |
| } |
| |
| if (!in_interrupt()) |
| BUG(); |
| |
| spin_lock(&priv->adapter->driver_lock); |
| /* take care of cur_cmd = NULL case by reading the |
| * data to clear the interrupt */ |
| if (!priv->adapter->cur_cmd) { |
| cmdbuf = priv->wlan_dev.upld_buf; |
| priv->adapter->hisregcpy &= ~his_cmdupldrdy; |
| } else |
| cmdbuf = priv->adapter->cur_cmd->bufvirtualaddr; |
| |
| cardp->usb_int_cause |= his_cmdupldrdy; |
| priv->wlan_dev.upld_len = (recvlength - MESSAGE_HEADER_LEN); |
| memcpy(cmdbuf, recvbuff + MESSAGE_HEADER_LEN, |
| priv->wlan_dev.upld_len); |
| |
| kfree_skb(skb); |
| libertas_interrupt(priv->wlan_dev.netdev); |
| spin_unlock(&priv->adapter->driver_lock); |
| |
| lbs_deb_usbd(&cardp->udev->dev, |
| "Wake up main thread to handle cmd response\n"); |
| |
| return; |
| } |
| |
| /** |
| * @brief This function reads of the packet into the upload buff, |
| * wake up the main thread and initialise the Rx callack. |
| * |
| * @param urb pointer to struct urb |
| * @return N/A |
| */ |
| static void if_usb_receive(struct urb *urb) |
| { |
| struct read_cb_info *rinfo = (struct read_cb_info *)urb->context; |
| wlan_private *priv = rinfo->priv; |
| struct sk_buff *skb = rinfo->skb; |
| struct usb_card_rec *cardp = (struct usb_card_rec *)priv->wlan_dev.card; |
| |
| int recvlength = urb->actual_length; |
| u8 *recvbuff = NULL; |
| u32 recvtype; |
| |
| lbs_deb_enter(LBS_DEB_USB); |
| |
| if (recvlength) { |
| if (urb->status) { |
| lbs_deb_usbd(&cardp->udev->dev, |
| "URB status is failed\n"); |
| kfree_skb(skb); |
| goto setup_for_next; |
| } |
| |
| recvbuff = skb->data + IPFIELD_ALIGN_OFFSET; |
| memcpy(&recvtype, recvbuff, sizeof(u32)); |
| lbs_deb_usbd(&cardp->udev->dev, |
| "Recv length = 0x%x\n", recvlength); |
| lbs_deb_usbd(&cardp->udev->dev, |
| "Receive type = 0x%X\n", recvtype); |
| recvtype = le32_to_cpu(recvtype); |
| lbs_deb_usbd(&cardp->udev->dev, |
| "Receive type after = 0x%X\n", recvtype); |
| } else if (urb->status) |
| goto rx_exit; |
| |
| |
| switch (recvtype) { |
| case CMD_TYPE_DATA: |
| process_cmdtypedata(recvlength, skb, cardp, priv); |
| break; |
| |
| case CMD_TYPE_REQUEST: |
| process_cmdrequest(recvlength, recvbuff, skb, cardp, priv); |
| break; |
| |
| case CMD_TYPE_INDICATION: |
| /* Event cause handling */ |
| spin_lock(&priv->adapter->driver_lock); |
| cardp->usb_event_cause = *(u32 *) (recvbuff + MESSAGE_HEADER_LEN); |
| lbs_deb_usbd(&cardp->udev->dev,"**EVENT** 0x%X\n", |
| cardp->usb_event_cause); |
| if (cardp->usb_event_cause & 0xffff0000) { |
| libertas_send_tx_feedback(priv); |
| spin_unlock(&priv->adapter->driver_lock); |
| break; |
| } |
| cardp->usb_event_cause = le32_to_cpu(cardp->usb_event_cause) << 3; |
| cardp->usb_int_cause |= his_cardevent; |
| kfree_skb(skb); |
| libertas_interrupt(priv->wlan_dev.netdev); |
| spin_unlock(&priv->adapter->driver_lock); |
| goto rx_exit; |
| default: |
| kfree_skb(skb); |
| break; |
| } |
| |
| setup_for_next: |
| if_usb_submit_rx_urb(priv); |
| rx_exit: |
| lbs_deb_leave(LBS_DEB_USB); |
| } |
| |
| /** |
| * @brief This function downloads data to FW |
| * @param priv pointer to wlan_private structure |
| * @param type type of data |
| * @param buf pointer to data buffer |
| * @param len number of bytes |
| * @return 0 or -1 |
| */ |
| int libertas_sbi_host_to_card(wlan_private * priv, u8 type, u8 * payload, u16 nb) |
| { |
| int ret = -1; |
| u32 tmp; |
| struct usb_card_rec *cardp = (struct usb_card_rec *)priv->wlan_dev.card; |
| |
| lbs_deb_usbd(&cardp->udev->dev,"*** type = %u\n", type); |
| lbs_deb_usbd(&cardp->udev->dev,"size after = %d\n", nb); |
| |
| if (type == MVMS_CMD) { |
| tmp = cpu_to_le32(CMD_TYPE_REQUEST); |
| priv->wlan_dev.dnld_sent = DNLD_CMD_SENT; |
| memcpy(cardp->bulk_out_buffer, (u8 *) & tmp, |
| MESSAGE_HEADER_LEN); |
| |
| } else { |
| tmp = cpu_to_le32(CMD_TYPE_DATA); |
| priv->wlan_dev.dnld_sent = DNLD_DATA_SENT; |
| memcpy(cardp->bulk_out_buffer, (u8 *) & tmp, |
| MESSAGE_HEADER_LEN); |
| } |
| |
| memcpy((cardp->bulk_out_buffer + MESSAGE_HEADER_LEN), payload, nb); |
| |
| ret = |
| usb_tx_block(priv, cardp->bulk_out_buffer, nb + MESSAGE_HEADER_LEN); |
| |
| return ret; |
| } |
| |
| /* called with adapter->driver_lock held */ |
| int libertas_sbi_get_int_status(wlan_private * priv, u8 * ireg) |
| { |
| struct usb_card_rec *cardp = priv->wlan_dev.card; |
| |
| *ireg = cardp->usb_int_cause; |
| cardp->usb_int_cause = 0; |
| |
| lbs_deb_usbd(&cardp->udev->dev,"Int cause is 0x%X\n", *ireg); |
| |
| return 0; |
| } |
| |
| int libertas_sbi_read_event_cause(wlan_private * priv) |
| { |
| struct usb_card_rec *cardp = priv->wlan_dev.card; |
| priv->adapter->eventcause = cardp->usb_event_cause; |
| /* Re-submit rx urb here to avoid event lost issue */ |
| if_usb_submit_rx_urb(priv); |
| return 0; |
| } |
| |
| static int reset_device(wlan_private *priv) |
| { |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_USB); |
| ret = libertas_prepare_and_send_command(priv, cmd_802_11_reset, |
| cmd_act_halt, 0, 0, NULL); |
| msleep_interruptible(10); |
| |
| lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret); |
| return ret; |
| } |
| |
| int libertas_sbi_unregister_dev(wlan_private * priv) |
| { |
| int ret = 0; |
| |
| /* Need to send a Reset command to device before USB resources freed |
| * and wlan_remove_card() called, then device can handle FW download |
| * again. |
| */ |
| if (priv) |
| reset_device(priv); |
| |
| return ret; |
| } |
| |
| |
| /** |
| * @brief This function register usb device and initialize parameter |
| * @param priv pointer to wlan_private |
| * @return 0 or -1 |
| */ |
| int libertas_sbi_register_dev(wlan_private * priv) |
| { |
| struct usb_card_rec *cardp = (struct usb_card_rec *)priv->wlan_dev.card; |
| |
| lbs_deb_enter(LBS_DEB_USB); |
| |
| cardp->priv = priv; |
| cardp->eth_dev = priv->wlan_dev.netdev; |
| priv->hotplug_device = &(cardp->udev->dev); |
| |
| SET_NETDEV_DEV(cardp->eth_dev, &(cardp->udev->dev)); |
| |
| lbs_deb_usbd(&cardp->udev->dev, "udev pointer is at %p\n", |
| cardp->udev); |
| |
| lbs_deb_leave(LBS_DEB_USB); |
| return 0; |
| } |
| |
| |
| |
| int libertas_sbi_prog_firmware(wlan_private * priv) |
| { |
| struct usb_card_rec *cardp = priv->wlan_dev.card; |
| int i = 0; |
| static int reset_count = 10; |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_USB); |
| |
| cardp->rinfo.priv = priv; |
| |
| restart: |
| if (if_usb_submit_rx_urb_fwload(priv) < 0) { |
| lbs_deb_usbd(&cardp->udev->dev, "URB submission is failed\n"); |
| ret = -1; |
| goto done; |
| } |
| |
| cardp->bootcmdresp = 0; |
| do { |
| int j = 0; |
| i++; |
| /* Issue Boot command = 1, Boot from Download-FW */ |
| if_usb_issue_boot_command(priv, BOOT_CMD_FW_BY_USB); |
| /* wait for command response */ |
| do { |
| j++; |
| msleep_interruptible(100); |
| } while (cardp->bootcmdresp == 0 && j < 10); |
| } while (cardp->bootcmdresp == 0 && i < 5); |
| |
| if (cardp->bootcmdresp == 0) { |
| if (--reset_count >= 0) { |
| libertas_do_reset(priv); |
| goto restart; |
| } |
| return -1; |
| } |
| |
| i = 0; |
| priv->adapter->fw_ready = 0; |
| |
| cardp->totalbytes = 0; |
| cardp->fwlastblksent = 0; |
| cardp->CRC_OK = 1; |
| cardp->fwdnldover = 0; |
| cardp->fwseqnum = -1; |
| cardp->totalbytes = 0; |
| cardp->fwfinalblk = 0; |
| |
| if_prog_firmware(priv); |
| |
| do { |
| lbs_deb_usbd(&cardp->udev->dev,"Wlan sched timeout\n"); |
| i++; |
| msleep_interruptible(100); |
| if (priv->adapter->surpriseremoved || i >= 20) |
| break; |
| } while (!cardp->fwdnldover); |
| |
| if (!cardp->fwdnldover) { |
| lbs_pr_info("failed to load fw, resetting device!\n"); |
| if (--reset_count >= 0) { |
| libertas_do_reset(priv); |
| goto restart; |
| } |
| |
| lbs_pr_info("FW download failure, time = %d ms\n", i * 100); |
| ret = -1; |
| goto done; |
| } |
| |
| if_usb_submit_rx_urb(priv); |
| |
| /* Delay 200 ms to waiting for the FW ready */ |
| msleep_interruptible(200); |
| |
| priv->adapter->fw_ready = 1; |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret); |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM |
| static int if_usb_suspend(struct usb_interface *intf, pm_message_t message) |
| { |
| struct usb_card_rec *cardp = usb_get_intfdata(intf); |
| wlan_private *priv = cardp->priv; |
| |
| lbs_deb_enter(LBS_DEB_USB); |
| |
| if (priv->adapter->psstate != PS_STATE_FULL_POWER) |
| return -1; |
| |
| netif_device_detach(cardp->eth_dev); |
| |
| /* Unlink tx & rx urb */ |
| usb_kill_urb(cardp->tx_urb); |
| usb_kill_urb(cardp->rx_urb); |
| |
| cardp->rx_urb_recall = 1; |
| |
| lbs_deb_leave(LBS_DEB_USB); |
| return 0; |
| } |
| |
| static int if_usb_resume(struct usb_interface *intf) |
| { |
| struct usb_card_rec *cardp = usb_get_intfdata(intf); |
| |
| lbs_deb_enter(LBS_DEB_USB); |
| |
| cardp->rx_urb_recall = 0; |
| |
| if_usb_submit_rx_urb(cardp->priv); |
| |
| netif_device_attach(cardp->eth_dev); |
| |
| lbs_deb_leave(LBS_DEB_USB); |
| return 0; |
| } |
| #else |
| #define if_usb_suspend NULL |
| #define if_usb_resume NULL |
| #endif |
| |
| static struct usb_driver if_usb_driver = { |
| /* driver name */ |
| .name = usbdriver_name, |
| /* probe function name */ |
| .probe = if_usb_probe, |
| /* disconnect function name */ |
| .disconnect = if_usb_disconnect, |
| /* device signature table */ |
| .id_table = if_usb_table, |
| .suspend = if_usb_suspend, |
| .resume = if_usb_resume, |
| }; |
| |
| /** |
| * @brief This function registers driver. |
| * @param add pointer to add_card callback function |
| * @param remove pointer to remove card callback function |
| * @param arg pointer to call back function parameter |
| * @return dummy success variable |
| */ |
| int libertas_sbi_register(void) |
| { |
| /* |
| * API registers the Marvell USB driver |
| * to the USB system |
| */ |
| usb_register(&if_usb_driver); |
| |
| /* Return success to wlan layer */ |
| return 0; |
| } |
| |
| /** |
| * @brief This function removes usb driver. |
| * @return N/A |
| */ |
| void libertas_sbi_unregister(void) |
| { |
| int i; |
| |
| for (i = 0; i<libertas_found; i++) { |
| wlan_private *priv = libertas_devs[i]->priv; |
| reset_device(priv); |
| } |
| |
| /* API unregisters the driver from USB subsystem */ |
| usb_deregister(&if_usb_driver); |
| } |