Merge commit 'v2.6.38-rc6' into devicetree/next
Conflicts:
drivers/spi/pxa2xx_spi_pci.c
diff --git a/Documentation/devicetree/bindings/serio/altera_ps2.txt b/Documentation/devicetree/bindings/serio/altera_ps2.txt
new file mode 100644
index 0000000..4d9eecc
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/altera_ps2.txt
@@ -0,0 +1,4 @@
+Altera UP PS/2 controller
+
+Required properties:
+- compatible : should be "ALTR,ps2-1.0".
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 0c68764..1071766 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -104,11 +104,22 @@
int global_number; /* PCI domain number */
};
+#ifdef CONFIG_PCI
static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
{
return bus->sysdata;
}
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+ struct pci_controller *host;
+
+ if (bus->self)
+ return pci_device_to_OF_node(bus->self);
+ host = pci_bus_to_host(bus);
+ return host ? host->dn : NULL;
+}
+
static inline int isa_vaddr_is_ioport(void __iomem *address)
{
/* No specific ISA handling on ppc32 at this stage, it
@@ -116,6 +127,7 @@
*/
return 0;
}
+#endif /* CONFIG_PCI */
/* These are used for config access before all the PCI probing
has been done. */
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 2e72af0..d0890d3 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -64,21 +64,6 @@
/* CPU OF node matching */
struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev: the device whose interrupt is to be resolved
- * @out_irq: structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-struct pci_dev;
-struct of_irq;
-extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index 9ae24f4..47187cc 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -2,88 +2,11 @@
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/pci_regs.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/etherdevice.h>
#include <linux/of_address.h>
#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#ifdef CONFIG_PCI
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
-{
- struct device_node *dn, *ppnode;
- struct pci_dev *ppdev;
- u32 lspec;
- u32 laddr[3];
- u8 pin;
- int rc;
-
- /* Check if we have a device node, if yes, fallback to standard OF
- * parsing
- */
- dn = pci_device_to_OF_node(pdev);
- if (dn)
- return of_irq_map_one(dn, 0, out_irq);
-
- /* Ok, we don't, time to have fun. Let's start by building up an
- * interrupt spec. we assume #interrupt-cells is 1, which is standard
- * for PCI. If you do different, then don't use that routine.
- */
- rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
- if (rc != 0)
- return rc;
- /* No pin, exit */
- if (pin == 0)
- return -ENODEV;
-
- /* Now we walk up the PCI tree */
- lspec = pin;
- for (;;) {
- /* Get the pci_dev of our parent */
- ppdev = pdev->bus->self;
-
- /* Ouch, it's a host bridge... */
- if (ppdev == NULL) {
- struct pci_controller *host;
- host = pci_bus_to_host(pdev->bus);
- ppnode = host ? host->dn : NULL;
- /* No node for host bridge ? give up */
- if (ppnode == NULL)
- return -EINVAL;
- } else
- /* We found a P2P bridge, check if it has a node */
- ppnode = pci_device_to_OF_node(ppdev);
-
- /* Ok, we have found a parent with a device-node, hand over to
- * the OF parsing code.
- * We build a unit address from the linux device to be used for
- * resolution. Note that we use the linux bus number which may
- * not match your firmware bus numbering.
- * Fortunately, in most cases, interrupt-map-mask doesn't
- * include the bus number as part of the matching.
- * You should still be careful about that though if you intend
- * to rely on this function (you ship a firmware that doesn't
- * create device nodes for all PCI devices).
- */
- if (ppnode)
- break;
-
- /* We can only get here if we hit a P2P bridge with no node,
- * let's do standard swizzling and try again
- */
- lspec = pci_swizzle_interrupt_pin(pdev, lspec);
- pdev = ppdev;
- }
-
- laddr[0] = (pdev->bus->number << 16)
- | (pdev->devfn << 8);
- laddr[1] = laddr[2] = 0;
- return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
-}
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
-#endif /* CONFIG_PCI */
void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
unsigned long *busno, unsigned long *phys, unsigned long *size)
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index e363615..1e01a12 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -29,6 +29,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_pci.h>
#include <asm/processor.h>
#include <asm/io.h>
diff --git a/arch/microblaze/pci/pci_32.c b/arch/microblaze/pci/pci_32.c
index 3c3d808..92728a6 100644
--- a/arch/microblaze/pci/pci_32.c
+++ b/arch/microblaze/pci/pci_32.c
@@ -332,6 +332,7 @@
hose->global_number);
return;
}
+ bus.dev->of_node = of_node_get(node);
bus->secondary = hose->first_busno;
hose->bus = bus;
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 51e9e6f..5e156e0 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -164,13 +164,23 @@
resource_size_t cfg_addr,
resource_size_t cfg_data, u32 flags);
-#ifndef CONFIG_PPC64
-
static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
{
return bus->sysdata;
}
+#ifndef CONFIG_PPC64
+
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+ struct pci_controller *host;
+
+ if (bus->self)
+ return pci_device_to_OF_node(bus->self);
+ host = pci_bus_to_host(bus);
+ return host ? host->dn : NULL;
+}
+
static inline int isa_vaddr_is_ioport(void __iomem *address)
{
/* No specific ISA handling on ppc32 at this stage, it
@@ -218,19 +228,10 @@
/* Get a device_node from a pci_dev. This code must be fast except
* in the case where the sysdata is incorrect and needs to be fixed
- * up (this will only happen once).
- * In this case the sysdata will have been inherited from a PCI host
- * bridge or a PCI-PCI bridge further up the tree, so it will point
- * to a valid struct pci_dn, just not the one we want.
- */
+ * up (this will only happen once). */
static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev)
{
- struct device_node *dn = dev->sysdata;
- struct pci_dn *pdn = dn->data;
-
- if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number)
- return dn; /* fast path. sysdata is good */
- return fetch_dev_dn(dev);
+ return dev->dev.of_node ? dev->dev.of_node : fetch_dev_dn(dev);
}
static inline int pci_device_from_OF_node(struct device_node *np,
@@ -248,7 +249,7 @@
if (bus->self)
return pci_device_to_OF_node(bus->self);
else
- return bus->sysdata; /* Must be root bus (PHB) */
+ return bus->dev.of_node; /* Must be root bus (PHB) */
}
/** Find the bus corresponding to the indicated device node */
@@ -260,14 +261,6 @@
/** Discover new pci devices under this bus, and add them */
extern void pcibios_add_pci_devices(struct pci_bus *bus);
-static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
-{
- struct device_node *busdn = bus->sysdata;
-
- BUG_ON(busdn == NULL);
- return PCI_DN(busdn)->phb;
-}
-
extern void isa_bridge_find_early(struct pci_controller *hose);
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index a20a9ad..7d77909 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -201,7 +201,7 @@
extern void pcibios_setup_bus_devices(struct pci_bus *bus);
extern void pcibios_setup_bus_self(struct pci_bus *bus);
extern void pcibios_setup_phb_io_space(struct pci_controller *hose);
-extern void pcibios_scan_phb(struct pci_controller *hose, void *sysdata);
+extern void pcibios_scan_phb(struct pci_controller *hose);
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index d727575..c189aa5 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -70,21 +70,6 @@
#endif
#define of_node_to_nid of_node_to_nid
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev: the device whose interrupt is to be resolved
- * @out_irq: structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-struct pci_dev;
-struct of_irq;
-extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
-
extern void of_instantiate_rtc(void);
/* These includes are put at the bottom because they may contain things
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index b2c363e..9bd951c 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -74,7 +74,7 @@
#endif /* CONFIG_EEH */
/* Scan the bus */
- pcibios_scan_phb(phb, dev->dev.of_node);
+ pcibios_scan_phb(phb);
if (phb->bus == NULL)
return -ENXIO;
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 10a44e6..3cd85fa 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/of_address.h>
+#include <linux/of_pci.h>
#include <linux/mm.h>
#include <linux/list.h>
#include <linux/syscalls.h>
@@ -1687,13 +1688,8 @@
/**
* pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
* @hose: Pointer to the PCI host controller instance structure
- * @sysdata: value to use for sysdata pointer. ppc32 and ppc64 differ here
- *
- * Note: the 'data' pointer is a temporary measure. As 32 and 64 bit
- * pci code gets merged, this parameter should become unnecessary because
- * both will use the same value.
*/
-void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata)
+void __devinit pcibios_scan_phb(struct pci_controller *hose)
{
struct pci_bus *bus;
struct device_node *node = hose->dn;
@@ -1703,13 +1699,13 @@
node ? node->full_name : "<NO NAME>");
/* Create an empty bus for the toplevel */
- bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops,
- sysdata);
+ bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
if (bus == NULL) {
pr_err("Failed to create bus for PCI domain %04x\n",
hose->global_number);
return;
}
+ bus->dev.of_node = of_node_get(node);
bus->secondary = hose->first_busno;
hose->bus = bus;
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index e7db5b4..bedb370 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -381,7 +381,7 @@
if (pci_assign_all_buses)
hose->first_busno = next_busno;
hose->last_busno = 0xff;
- pcibios_scan_phb(hose, hose);
+ pcibios_scan_phb(hose);
pci_bus_add_devices(hose->bus);
if (pci_assign_all_buses || next_busno <= hose->last_busno)
next_busno = hose->last_busno + pcibios_assign_bus_offset;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 8515776..fc6452b 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -64,7 +64,7 @@
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
- pcibios_scan_phb(hose, hose->dn);
+ pcibios_scan_phb(hose);
pci_bus_add_devices(hose->bus);
}
@@ -242,10 +242,10 @@
break;
bus = NULL;
}
- if (bus == NULL || bus->sysdata == NULL)
+ if (bus == NULL || bus->dev.of_node == NULL)
return -ENODEV;
- hose_node = (struct device_node *)bus->sysdata;
+ hose_node = bus->dev.of_node;
hose = PCI_DN(hose_node)->phb;
switch (which) {
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index d56b35e..2985268 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -161,7 +161,7 @@
/*
* This is the "slow" path for looking up a device_node from a
* pci_dev. It will hunt for the device under its parent's
- * phb and then update sysdata for a future fastpath.
+ * phb and then update of_node pointer.
*
* It may also do fixups on the actual device since this happens
* on the first read/write.
@@ -170,16 +170,19 @@
* In this case it may probe for real hardware ("just in case")
* and add a device_node to the device tree if necessary.
*
+ * Is this function necessary anymore now that dev->dev.of_node is
+ * used to store the node pointer?
+ *
*/
struct device_node *fetch_dev_dn(struct pci_dev *dev)
{
- struct device_node *orig_dn = dev->sysdata;
+ struct device_node *orig_dn = dev->dev.of_node;
struct device_node *dn;
unsigned long searchval = (dev->bus->number << 8) | dev->devfn;
dn = traverse_pci_devices(orig_dn, is_devfn_node, (void *)searchval);
if (dn)
- dev->sysdata = dn;
+ dev->dev.of_node = dn;
return dn;
}
EXPORT_SYMBOL(fetch_dev_dn);
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index e7515063..1e89a72f 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -135,7 +135,7 @@
pr_debug(" create device, devfn: %x, type: %s\n", devfn, type);
dev->bus = bus;
- dev->sysdata = node;
+ dev->dev.of_node = of_node_get(node);
dev->dev.parent = bus->bridge;
dev->dev.bus = &pci_bus_type;
dev->devfn = devfn;
@@ -238,7 +238,7 @@
bus->primary = dev->bus->number;
bus->subordinate = busrange[1];
bus->bridge_ctl = 0;
- bus->sysdata = node;
+ bus->dev.of_node = of_node_get(node);
/* parse ranges property */
/* PCI #address-cells == 3 and #size-cells == 2 always */
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index c2b7a07..47187cc 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -2,95 +2,11 @@
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/pci_regs.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/etherdevice.h>
#include <linux/of_address.h>
#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#ifdef CONFIG_PCI
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
-{
- struct device_node *dn, *ppnode;
- struct pci_dev *ppdev;
- u32 lspec;
- u32 laddr[3];
- u8 pin;
- int rc;
-
- /* Check if we have a device node, if yes, fallback to standard OF
- * parsing
- */
- dn = pci_device_to_OF_node(pdev);
- if (dn) {
- rc = of_irq_map_one(dn, 0, out_irq);
- if (!rc)
- return rc;
- }
-
- /* Ok, we don't, time to have fun. Let's start by building up an
- * interrupt spec. we assume #interrupt-cells is 1, which is standard
- * for PCI. If you do different, then don't use that routine.
- */
- rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
- if (rc != 0)
- return rc;
- /* No pin, exit */
- if (pin == 0)
- return -ENODEV;
-
- /* Now we walk up the PCI tree */
- lspec = pin;
- for (;;) {
- /* Get the pci_dev of our parent */
- ppdev = pdev->bus->self;
-
- /* Ouch, it's a host bridge... */
- if (ppdev == NULL) {
-#ifdef CONFIG_PPC64
- ppnode = pci_bus_to_OF_node(pdev->bus);
-#else
- struct pci_controller *host;
- host = pci_bus_to_host(pdev->bus);
- ppnode = host ? host->dn : NULL;
-#endif
- /* No node for host bridge ? give up */
- if (ppnode == NULL)
- return -EINVAL;
- } else
- /* We found a P2P bridge, check if it has a node */
- ppnode = pci_device_to_OF_node(ppdev);
-
- /* Ok, we have found a parent with a device-node, hand over to
- * the OF parsing code.
- * We build a unit address from the linux device to be used for
- * resolution. Note that we use the linux bus number which may
- * not match your firmware bus numbering.
- * Fortunately, in most cases, interrupt-map-mask doesn't include
- * the bus number as part of the matching.
- * You should still be careful about that though if you intend
- * to rely on this function (you ship a firmware that doesn't
- * create device nodes for all PCI devices).
- */
- if (ppnode)
- break;
-
- /* We can only get here if we hit a P2P bridge with no node,
- * let's do standard swizzling and try again
- */
- lspec = pci_swizzle_interrupt_pin(pdev, lspec);
- pdev = ppdev;
- }
-
- laddr[0] = (pdev->bus->number << 16)
- | (pdev->devfn << 8);
- laddr[1] = laddr[2] = 0;
- return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
-}
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
-#endif /* CONFIG_PCI */
void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
unsigned long *busno, unsigned long *phys, unsigned long *size)
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 5fcc92a..3bf4488 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -149,7 +149,7 @@
if (dn->child)
eeh_add_device_tree_early(dn);
- pcibios_scan_phb(phb, dn);
+ pcibios_scan_phb(phb);
pcibios_finish_adding_to_bus(phb->bus);
return phb;
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index ef3bcb1..c2ef5ce 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -330,9 +330,7 @@
i2c->adap = ocores_adapter;
i2c_set_adapdata(&i2c->adap, i2c);
i2c->adap.dev.parent = &pdev->dev;
-#ifdef CONFIG_OF
i2c->adap.dev.of_node = pdev->dev.of_node;
-#endif
/* add i2c adapter to i2c tree */
ret = i2c_add_adapter(&i2c->adap);
@@ -390,15 +388,11 @@
#define ocores_i2c_resume NULL
#endif
-#ifdef CONFIG_OF
static struct of_device_id ocores_i2c_match[] = {
- {
- .compatible = "opencores,i2c-ocores",
- },
- {},
+ { .compatible = "opencores,i2c-ocores", },
+ {},
};
MODULE_DEVICE_TABLE(of, ocores_i2c_match);
-#endif
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:ocores-i2c");
@@ -411,9 +405,7 @@
.driver = {
.owner = THIS_MODULE,
.name = "ocores-i2c",
-#ifdef CONFIG_OF
- .of_match_table = ocores_i2c_match,
-#endif
+ .of_match_table = ocores_i2c_match,
},
};
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index f0bd5bc..045ba6e 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -537,9 +537,7 @@
client->dev.parent = &client->adapter->dev;
client->dev.bus = &i2c_bus_type;
client->dev.type = &i2c_client_type;
-#ifdef CONFIG_OF
client->dev.of_node = info->of_node;
-#endif
dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
client->addr);
diff --git a/drivers/input/serio/altera_ps2.c b/drivers/input/serio/altera_ps2.c
index 7998560..d363dc4 100644
--- a/drivers/input/serio/altera_ps2.c
+++ b/drivers/input/serio/altera_ps2.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/of.h>
#define DRV_NAME "altera_ps2"
@@ -173,6 +174,16 @@
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id altera_ps2_match[] = {
+ { .compatible = "ALTR,ps2-1.0", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, altera_ps2_match);
+#else /* CONFIG_OF */
+#define altera_ps2_match NULL
+#endif /* CONFIG_OF */
+
/*
* Our device driver structure
*/
@@ -182,6 +193,7 @@
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
+ .of_match_table = altera_ps2_match,
},
};
@@ -189,13 +201,12 @@
{
return platform_driver_register(&altera_ps2_driver);
}
+module_init(altera_ps2_init);
static void __exit altera_ps2_exit(void)
{
platform_driver_unregister(&altera_ps2_driver);
}
-
-module_init(altera_ps2_init);
module_exit(altera_ps2_exit);
MODULE_DESCRIPTION("Altera University Program PS2 controller driver");
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index fd877f6..2f7fc0c 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -1516,21 +1516,17 @@
return 0;
}
-#if defined(CONFIG_OF)
static struct of_device_id mmc_spi_of_match_table[] __devinitdata = {
{ .compatible = "mmc-spi-slot", },
{},
};
-#endif
static struct spi_driver mmc_spi_driver = {
.driver = {
.name = "mmc_spi",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
-#if defined(CONFIG_OF)
.of_match_table = mmc_spi_of_match_table,
-#endif
},
.probe = mmc_spi_probe,
.remove = __devexit_p(mmc_spi_remove),
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index b79d7e1..db0290f 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -1163,15 +1163,11 @@
# define ethoc_resume NULL
#endif
-#ifdef CONFIG_OF
static struct of_device_id ethoc_match[] = {
- {
- .compatible = "opencores,ethoc",
- },
+ { .compatible = "opencores,ethoc", },
{},
};
MODULE_DEVICE_TABLE(of, ethoc_match);
-#endif
static struct platform_driver ethoc_driver = {
.probe = ethoc_probe,
@@ -1181,9 +1177,7 @@
.driver = {
.name = "ethoc",
.owner = THIS_MODULE,
-#ifdef CONFIG_OF
.of_match_table = ethoc_match,
-#endif
},
};
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index 3c6e100..efabbf9 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -69,4 +69,10 @@
help
OpenFirmware MDIO bus (Ethernet PHY) accessors
+config OF_PCI
+ def_tristate PCI
+ depends on PCI && (PPC || MICROBLAZE)
+ help
+ OpenFirmware PCI bus accessors
+
endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 3ab21a0..f7861ed 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -9,3 +9,4 @@
obj-$(CONFIG_OF_NET) += of_net.o
obj-$(CONFIG_OF_SPI) += of_spi.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o
+obj-$(CONFIG_OF_PCI) += of_pci.o
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
new file mode 100644
index 0000000..314535f
--- /dev/null
+++ b/drivers/of/of_pci.c
@@ -0,0 +1,91 @@
+#include <linux/kernel.h>
+#include <linux/of_pci.h>
+#include <asm/prom.h>
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev: the device whose interrupt is to be resolved
+ * @out_irq: structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+ struct device_node *dn, *ppnode;
+ struct pci_dev *ppdev;
+ u32 lspec;
+ __be32 lspec_be;
+ __be32 laddr[3];
+ u8 pin;
+ int rc;
+
+ /* Check if we have a device node, if yes, fallback to standard
+ * device tree parsing
+ */
+ dn = pci_device_to_OF_node(pdev);
+ if (dn) {
+ rc = of_irq_map_one(dn, 0, out_irq);
+ if (!rc)
+ return rc;
+ }
+
+ /* Ok, we don't, time to have fun. Let's start by building up an
+ * interrupt spec. we assume #interrupt-cells is 1, which is standard
+ * for PCI. If you do different, then don't use that routine.
+ */
+ rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+ if (rc != 0)
+ return rc;
+ /* No pin, exit */
+ if (pin == 0)
+ return -ENODEV;
+
+ /* Now we walk up the PCI tree */
+ lspec = pin;
+ for (;;) {
+ /* Get the pci_dev of our parent */
+ ppdev = pdev->bus->self;
+
+ /* Ouch, it's a host bridge... */
+ if (ppdev == NULL) {
+ ppnode = pci_bus_to_OF_node(pdev->bus);
+
+ /* No node for host bridge ? give up */
+ if (ppnode == NULL)
+ return -EINVAL;
+ } else {
+ /* We found a P2P bridge, check if it has a node */
+ ppnode = pci_device_to_OF_node(ppdev);
+ }
+
+ /* Ok, we have found a parent with a device-node, hand over to
+ * the OF parsing code.
+ * We build a unit address from the linux device to be used for
+ * resolution. Note that we use the linux bus number which may
+ * not match your firmware bus numbering.
+ * Fortunately, in most cases, interrupt-map-mask doesn't
+ * include the bus number as part of the matching.
+ * You should still be careful about that though if you intend
+ * to rely on this function (you ship a firmware that doesn't
+ * create device nodes for all PCI devices).
+ */
+ if (ppnode)
+ break;
+
+ /* We can only get here if we hit a P2P bridge with no node,
+ * let's do standard swizzling and try again
+ */
+ lspec = pci_swizzle_interrupt_pin(pdev, lspec);
+ pdev = ppdev;
+ }
+
+ lspec_be = cpu_to_be32(lspec);
+ laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
+ laddr[1] = laddr[2] = cpu_to_be32(0);
+ return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 9592883..a429b01 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1557,9 +1557,7 @@
drv_data->ssp = ssp;
master->dev.parent = &pdev->dev;
-#ifdef CONFIG_OF
master->dev.of_node = pdev->dev.of_node;
-#endif
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
diff --git a/drivers/spi/pxa2xx_spi_pci.c b/drivers/spi/pxa2xx_spi_pci.c
index 19752b0..378e504 100644
--- a/drivers/spi/pxa2xx_spi_pci.c
+++ b/drivers/spi/pxa2xx_spi_pci.c
@@ -89,9 +89,7 @@
goto err_nomem;
pdev->dev.parent = &dev->dev;
-#ifdef CONFIG_OF
pdev->dev.of_node = dev->dev.of_node;
-#endif
ssp = &spi_info->ssp;
ssp->phys_base = pci_resource_start(dev, 0);
ssp->mmio_base = ioremap(phys_beg, phys_len);
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 7adaef6..4d2c75d 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -351,14 +351,12 @@
return IRQ_HANDLED;
}
-#ifdef CONFIG_OF
static const struct of_device_id xilinx_spi_of_match[] = {
{ .compatible = "xlnx,xps-spi-2.00.a", },
{ .compatible = "xlnx,xps-spi-2.00.b", },
{}
};
MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
-#endif
struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word)
@@ -394,9 +392,7 @@
master->bus_num = bus_num;
master->num_chipselect = num_cs;
-#ifdef CONFIG_OF
master->dev.of_node = dev->of_node;
-#endif
xspi->mem = *mem;
xspi->irq = irq;
@@ -539,9 +535,7 @@
.driver = {
.name = XILINX_SPI_NAME,
.owner = THIS_MODULE,
-#ifdef CONFIG_OF
.of_match_table = xilinx_spi_of_match,
-#endif
},
};
diff --git a/include/linux/device.h b/include/linux/device.h
index 1bf5cf0..ca5d252 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -128,9 +128,7 @@
bool suppress_bind_attrs; /* disables bind/unbind via sysfs */
-#if defined(CONFIG_OF)
const struct of_device_id *of_match_table;
-#endif
int (*probe) (struct device *dev);
int (*remove) (struct device *dev);
@@ -441,9 +439,8 @@
override */
/* arch specific additions */
struct dev_archdata archdata;
-#ifdef CONFIG_OF
- struct device_node *of_node;
-#endif
+
+ struct device_node *of_node; /* associated device tree node */
dev_t devt; /* dev_t, creates the sysfs "dev" */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 903576d..06a8d9c 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -258,9 +258,7 @@
unsigned short addr;
void *platform_data;
struct dev_archdata *archdata;
-#ifdef CONFIG_OF
struct device_node *of_node;
-#endif
int irq;
};
diff --git a/include/linux/of.h b/include/linux/of.h
index cad7cf0..d9dd664 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -23,8 +23,6 @@
#include <asm/byteorder.h>
-#ifdef CONFIG_OF
-
typedef u32 phandle;
typedef u32 ihandle;
@@ -65,6 +63,8 @@
#endif
};
+#ifdef CONFIG_OF
+
/* Pointer for first entry in chain of all nodes. */
extern struct device_node *allnodes;
extern struct device_node *of_chosen;
diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h
new file mode 100644
index 0000000..85a27b6
--- /dev/null
+++ b/include/linux/of_pci.h
@@ -0,0 +1,9 @@
+#ifndef __OF_PCI_H
+#define __OF_PCI_H
+
+#include <linux/pci.h>
+
+struct pci_dev;
+struct of_irq;
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+#endif