rt2x00: Add rt2800 EEPROM definition
Add and modify NIC Configuration and LED definition of EEPROM
Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index a81c437..9dcbf87 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -1841,32 +1841,51 @@
#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
/*
- * EEPROM ANTENNA config
+ * EEPROM NIC Configuration 0
* RXPATH: 1: 1R, 2: 2R, 3: 3R
- * TXPATH: 1: 1T, 2: 2T
+ * TXPATH: 1: 1T, 2: 2T, 3: 3T
+ * RF_TYPE: RFIC type
*/
-#define EEPROM_ANTENNA 0x001a
-#define EEPROM_ANTENNA_RXPATH FIELD16(0x000f)
-#define EEPROM_ANTENNA_TXPATH FIELD16(0x00f0)
-#define EEPROM_ANTENNA_RF_TYPE FIELD16(0x0f00)
+#define EEPROM_NIC_CONF0 0x001a
+#define EEPROM_NIC_CONF0_RXPATH FIELD16(0x000f)
+#define EEPROM_NIC_CONF0_TXPATH FIELD16(0x00f0)
+#define EEPROM_NIC_CONF0_RF_TYPE FIELD16(0x0f00)
/*
- * EEPROM NIC config
- * CARDBUS_ACCEL: 0 - enable, 1 - disable
+ * EEPROM NIC Configuration 1
+ * HW_RADIO: 0: disable, 1: enable
+ * EXTERNAL_TX_ALC: 0: disable, 1: enable
+ * EXTERNAL_LNA_2G: 0: disable, 1: enable
+ * EXTERNAL_LNA_5G: 0: disable, 1: enable
+ * CARDBUS_ACCEL: 0: enable, 1: disable
+ * BW40M_SB_2G: 0: disable, 1: enable
+ * BW40M_SB_5G: 0: disable, 1: enable
+ * WPS_PBC: 0: disable, 1: enable
+ * BW40M_2G: 0: enable, 1: disable
+ * BW40M_5G: 0: enable, 1: disable
+ * BROADBAND_EXT_LNA: 0: disable, 1: enable
+ * ANT_DIVERSITY: 00: Disable, 01: Diversity,
+ * 10: Main antenna, 11: Aux antenna
+ * INTERNAL_TX_ALC: 0: disable, 1: enable
+ * BT_COEXIST: 0: disable, 1: enable
+ * DAC_TEST: 0: disable, 1: enable
*/
-#define EEPROM_NIC 0x001b
-#define EEPROM_NIC_HW_RADIO FIELD16(0x0001)
-#define EEPROM_NIC_DYNAMIC_TX_AGC FIELD16(0x0002)
-#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0004)
-#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0008)
-#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0010)
-#define EEPROM_NIC_BW40M_SB_BG FIELD16(0x0020)
-#define EEPROM_NIC_BW40M_SB_A FIELD16(0x0040)
-#define EEPROM_NIC_WPS_PBC FIELD16(0x0080)
-#define EEPROM_NIC_BW40M_BG FIELD16(0x0100)
-#define EEPROM_NIC_BW40M_A FIELD16(0x0200)
-#define EEPROM_NIC_ANT_DIVERSITY FIELD16(0x0800)
-#define EEPROM_NIC_DAC_TEST FIELD16(0x8000)
+#define EEPROM_NIC_CONF1 0x001b
+#define EEPROM_NIC_CONF1_HW_RADIO FIELD16(0x0001)
+#define EEPROM_NIC_CONF1_EXTERNAL_TX_ALC FIELD16(0x0002)
+#define EEPROM_NIC_CONF1_EXTERNAL_LNA_2G FIELD16(0x0004)
+#define EEPROM_NIC_CONF1_EXTERNAL_LNA_5G FIELD16(0x0008)
+#define EEPROM_NIC_CONF1_CARDBUS_ACCEL FIELD16(0x0010)
+#define EEPROM_NIC_CONF1_BW40M_SB_2G FIELD16(0x0020)
+#define EEPROM_NIC_CONF1_BW40M_SB_5G FIELD16(0x0040)
+#define EEPROM_NIC_CONF1_WPS_PBC FIELD16(0x0080)
+#define EEPROM_NIC_CONF1_BW40M_2G FIELD16(0x0100)
+#define EEPROM_NIC_CONF1_BW40M_5G FIELD16(0x0200)
+#define EEPROM_NIC_CONF1_BROADBAND_EXT_LNA FIELD16(0x400)
+#define EEPROM_NIC_CONF1_ANT_DIVERSITY FIELD16(0x1800)
+#define EEPROM_NIC_CONF1_INTERNAL_TX_ALC FIELD16(0x2000)
+#define EEPROM_NIC_CONF1_BT_COEXIST FIELD16(0x4000)
+#define EEPROM_NIC_CONF1_DAC_TEST FIELD16(0x8000)
/*
* EEPROM frequency
@@ -1888,9 +1907,9 @@
* POLARITY_GPIO_4: Polarity GPIO4 setting.
* LED_MODE: Led mode.
*/
-#define EEPROM_LED1 0x001e
-#define EEPROM_LED2 0x001f
-#define EEPROM_LED3 0x0020
+#define EEPROM_LED_AG_CONF 0x001e
+#define EEPROM_LED_ACT_CONF 0x001f
+#define EEPROM_LED_POLARITY 0x0020
#define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001)
#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
@@ -1902,6 +1921,17 @@
#define EEPROM_LED_LED_MODE FIELD16(0x1f00)
/*
+ * EEPROM NIC Configuration 2
+ * RX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream
+ * TX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream
+ * CRYSTAL: 00: Reserved, 01: One crystal, 10: Two crystal, 11: Reserved
+ */
+#define EEPROM_NIC_CONF2 0x0021
+#define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f)
+#define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0)
+#define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600)
+
+/*
* EEPROM LNA
*/
#define EEPROM_LNA 0x0022
@@ -1951,7 +1981,7 @@
/*
* EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
- * This is delta in 40MHZ.
+ * This is delta in 40MHZ.
* VALUE: Tx Power dalta value (MAX=4)
* TYPE: 1: Plus the delta value, 0: minus the delta value
* TXPOWER: Enable:
@@ -2007,9 +2037,9 @@
#define MCU_CURRENT 0x36
#define MCU_LED 0x50
#define MCU_LED_STRENGTH 0x51
-#define MCU_LED_1 0x52
-#define MCU_LED_2 0x53
-#define MCU_LED_3 0x54
+#define MCU_LED_AG_CONF 0x52
+#define MCU_LED_ACT_CONF 0x53
+#define MCU_LED_LED_POLARITY 0x54
#define MCU_RADAR 0x60
#define MCU_BOOT_SIGNAL 0x72
#define MCU_BBP_SIGNAL 0x80