MIPS: Malta: Probe interrupt controllers via DT
Probe the CPU, GIC & i8259 interrupt controllers present in the Malta
system using device tree. This enables interrupts to be provided to
devices using device tree as they are moved over to being probed using
it.
Since Malta is very configurable it's unknown whether a GIC will be
present at compile time. In order to support both cases the
malta_dt_shim code is added in order to detect whether a GIC is present,
adjusting the DT to route interrupts correctly and nop out the GIC node
if no GIC is found.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14274/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index c6a6c7a..9f83224 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -14,11 +14,13 @@
*/
#include <linux/init.h>
#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irqchip/mips-gic.h>
+#include <linux/of_irq.h>
#include <linux/kernel_stat.h>
#include <linux/kernel.h>
#include <linux/random.h>
@@ -37,10 +39,6 @@
#include <asm/setup.h>
#include <asm/rtlx.h>
-static void __iomem *_msc01_biu_base;
-
-static DEFINE_RAW_SPINLOCK(mips_irq_lock);
-
static inline int mips_pcibios_iack(void)
{
int irq;
@@ -85,49 +83,6 @@
return irq;
}
-static inline int get_int(void)
-{
- unsigned long flags;
- int irq;
- raw_spin_lock_irqsave(&mips_irq_lock, flags);
-
- irq = mips_pcibios_iack();
-
- /*
- * The only way we can decide if an interrupt is spurious
- * is by checking the 8259 registers. This needs a spinlock
- * on an SMP system, so leave it up to the generic code...
- */
-
- raw_spin_unlock_irqrestore(&mips_irq_lock, flags);
-
- return irq;
-}
-
-static void malta_hw0_irqdispatch(void)
-{
- int irq;
-
- irq = get_int();
- if (irq < 0) {
- /* interrupt has already been cleared */
- return;
- }
-
- do_IRQ(MALTA_INT_BASE + irq);
-
-#ifdef CONFIG_MIPS_VPE_APSP_API_MT
- if (aprp_hook)
- aprp_hook();
-#endif
-}
-
-static irqreturn_t i8259_handler(int irq, void *dev_id)
-{
- malta_hw0_irqdispatch();
- return IRQ_HANDLED;
-}
-
static void corehi_irqdispatch(void)
{
unsigned int intedge, intsteer, pcicmd, pcibadaddr;
@@ -240,12 +195,6 @@
};
#endif /* CONFIG_MIPS_MT_SMP */
-static struct irqaction i8259irq = {
- .handler = i8259_handler,
- .name = "XT-PIC cascade",
- .flags = IRQF_NO_THREAD,
-};
-
static struct irqaction corehi_irqaction = {
.handler = corehi_handler,
.name = "CoreHi",
@@ -281,28 +230,10 @@
void __init arch_init_irq(void)
{
- int corehi_irq, i8259_irq;
+ int corehi_irq;
- init_i8259_irqs();
-
- if (!cpu_has_veic)
- mips_cpu_irq_init();
-
- if (mips_cm_present()) {
- write_gcr_gic_base(GIC_BASE_ADDR | CM_GCR_GIC_BASE_GICEN_MSK);
- gic_present = 1;
- } else {
- if (mips_revision_sconid == MIPS_REVISION_SCON_ROCIT) {
- _msc01_biu_base = ioremap_nocache(MSC01_BIU_REG_BASE,
- MSC01_BIU_ADDRSPACE_SZ);
- gic_present =
- (__raw_readl(_msc01_biu_base + MSC01_SC_CFG_OFS) &
- MSC01_SC_CFG_GICPRES_MSK) >>
- MSC01_SC_CFG_GICPRES_SHF;
- }
- }
- if (gic_present)
- pr_debug("GIC present\n");
+ i8259_set_poll(mips_pcibios_iack);
+ irqchip_init();
switch (mips_revision_sconid) {
case MIPS_REVISION_SCON_SOCIT:
@@ -330,18 +261,6 @@
}
if (gic_present) {
- int i;
-
- gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, MIPSCPU_INT_GIC,
- MIPS_GIC_IRQ_BASE);
- if (!mips_cm_present()) {
- /* Enable the GIC */
- i = __raw_readl(_msc01_biu_base + MSC01_SC_CFG_OFS);
- __raw_writel(i | (0x1 << MSC01_SC_CFG_GICENA_SHF),
- _msc01_biu_base + MSC01_SC_CFG_OFS);
- pr_debug("GIC Enabled\n");
- }
- i8259_irq = MIPS_GIC_IRQ_BASE + GIC_INT_I8259A;
corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
} else {
#if defined(CONFIG_MIPS_MT_SMP)
@@ -361,19 +280,14 @@
arch_init_ipiirq(cpu_ipi_call_irq, &irq_call);
#endif
if (cpu_has_veic) {
- set_vi_handler(MSC01E_INT_I8259A,
- malta_hw0_irqdispatch);
set_vi_handler(MSC01E_INT_COREHI,
corehi_irqdispatch);
- i8259_irq = MSC01E_INT_BASE + MSC01E_INT_I8259A;
corehi_irq = MSC01E_INT_BASE + MSC01E_INT_COREHI;
} else {
- i8259_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_I8259A;
corehi_irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_COREHI;
}
}
- setup_irq(i8259_irq, &i8259irq);
setup_irq(corehi_irq, &corehi_irqaction);
}