[SCSI] qla2xxx: Add host-statistics FC transport attributes.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 3099b37..49ce197 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -7,7 +7,6 @@
#include "qla_def.h"
#include <linux/delay.h>
-#include <scsi/scsi_transport_fc.h>
static void
qla2x00_mbx_sem_timeout(unsigned long data)
@@ -2017,8 +2016,109 @@
return rval;
}
+#endif
-uint8_t
+/*
+ * qla2x00_get_link_status
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * loop_id = device loop ID.
+ * ret_buf = pointer to link status return buffer.
+ *
+ * Returns:
+ * 0 = success.
+ * BIT_0 = mem alloc error.
+ * BIT_1 = mailbox error.
+ */
+int
+qla2x00_get_link_status(scsi_qla_host_t *ha, uint16_t loop_id,
+ link_stat_t *ret_buf, uint16_t *status)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ link_stat_t *stat_buf;
+ dma_addr_t stat_buf_dma;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no);)
+
+ stat_buf = dma_pool_alloc(ha->s_dma_pool, GFP_ATOMIC, &stat_buf_dma);
+ if (stat_buf == NULL) {
+ DEBUG2_3_11(printk("%s(%ld): Failed to allocate memory.\n",
+ __func__, ha->host_no));
+ return BIT_0;
+ }
+ memset(stat_buf, 0, sizeof(link_stat_t));
+
+ mcp->mb[0] = MBC_GET_LINK_STATUS;
+ mcp->mb[2] = MSW(stat_buf_dma);
+ mcp->mb[3] = LSW(stat_buf_dma);
+ mcp->mb[6] = MSW(MSD(stat_buf_dma));
+ mcp->mb[7] = LSW(MSD(stat_buf_dma));
+ mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_0;
+ mcp->in_mb = MBX_0;
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ mcp->mb[1] = loop_id;
+ mcp->mb[4] = 0;
+ mcp->mb[10] = 0;
+ mcp->out_mb |= MBX_10|MBX_4|MBX_1;
+ mcp->in_mb |= MBX_1;
+ } else if (HAS_EXTENDED_IDS(ha)) {
+ mcp->mb[1] = loop_id;
+ mcp->mb[10] = 0;
+ mcp->out_mb |= MBX_10|MBX_1;
+ } else {
+ mcp->mb[1] = loop_id << 8;
+ mcp->out_mb |= MBX_1;
+ }
+ mcp->tov = 30;
+ mcp->flags = IOCTL_CMD;
+ rval = qla2x00_mailbox_command(ha, mcp);
+
+ if (rval == QLA_SUCCESS) {
+ if (mcp->mb[0] != MBS_COMMAND_COMPLETE) {
+ DEBUG2_3_11(printk("%s(%ld): cmd failed. mbx0=%x.\n",
+ __func__, ha->host_no, mcp->mb[0]);)
+ status[0] = mcp->mb[0];
+ rval = BIT_1;
+ } else {
+ /* copy over data -- firmware data is LE. */
+ ret_buf->link_fail_cnt =
+ le32_to_cpu(stat_buf->link_fail_cnt);
+ ret_buf->loss_sync_cnt =
+ le32_to_cpu(stat_buf->loss_sync_cnt);
+ ret_buf->loss_sig_cnt =
+ le32_to_cpu(stat_buf->loss_sig_cnt);
+ ret_buf->prim_seq_err_cnt =
+ le32_to_cpu(stat_buf->prim_seq_err_cnt);
+ ret_buf->inval_xmit_word_cnt =
+ le32_to_cpu(stat_buf->inval_xmit_word_cnt);
+ ret_buf->inval_crc_cnt =
+ le32_to_cpu(stat_buf->inval_crc_cnt);
+
+ DEBUG11(printk("%s(%ld): stat dump: fail_cnt=%d "
+ "loss_sync=%d loss_sig=%d seq_err=%d "
+ "inval_xmt_word=%d inval_crc=%d.\n", __func__,
+ ha->host_no, stat_buf->link_fail_cnt,
+ stat_buf->loss_sync_cnt, stat_buf->loss_sig_cnt,
+ stat_buf->prim_seq_err_cnt,
+ stat_buf->inval_xmit_word_cnt,
+ stat_buf->inval_crc_cnt);)
+ }
+ } else {
+ /* Failed. */
+ DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
+ ha->host_no, rval);)
+ rval = BIT_1;
+ }
+
+ dma_pool_free(ha->s_dma_pool, stat_buf, stat_buf_dma);
+
+ return rval;
+}
+
+int
qla24xx_get_isp_stats(scsi_qla_host_t *ha, uint32_t *dwbuf, uint32_t dwords,
uint16_t *status)
{
@@ -2080,7 +2180,6 @@
return rval;
}
-#endif
int
qla24xx_abort_command(scsi_qla_host_t *ha, srb_t *sp)