pcmcia: do not lock socket driver module on card insert

Do not lock the socket driver module on card insert, as
the PCMCIA core can handle a socket module removal, at least
if we add a call to socket_remove() on pccardd()'s shutdown.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index f0630a6..137a5db 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -407,7 +407,7 @@
 			   "*** DANGER *** unable to remove socket power\n");
 	}
 
-	cs_socket_put(s);
+	s->state &= ~SOCKET_INUSE;
 }
 
 static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
@@ -496,8 +496,8 @@
 
 	dev_dbg(&skt->dev, "insert\n");
 
-	if (!cs_socket_get(skt))
-		return -ENODEV;
+	WARN_ON(skt->state & SOCKET_INUSE);
+	skt->state |= SOCKET_INUSE;
 
 	ret = socket_setup(skt, setup_delay);
 	if (ret == 0) {
@@ -697,6 +697,13 @@
 	/* make sure we are running before we exit */
 	set_current_state(TASK_RUNNING);
 
+	/* shut down socket, if a device is still present */
+	if (skt->state & SOCKET_PRESENT) {
+		mutex_lock(&skt->skt_mutex);
+		socket_remove(skt);
+		mutex_unlock(&skt->skt_mutex);
+	}
+
 	/* remove from the device core */
 	pccard_sysfs_remove_socket(&skt->dev);
 	device_unregister(&skt->dev);
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index 3bc02d5..9a3bbad 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -87,26 +87,6 @@
 #define SOCKET_CARDBUS		0x8000
 #define SOCKET_CARDBUS_CONFIG	0x10000
 
-static inline int cs_socket_get(struct pcmcia_socket *skt)
-{
-	int ret;
-
-	WARN_ON(skt->state & SOCKET_INUSE);
-
-	ret = try_module_get(skt->owner);
-	if (ret)
-		skt->state |= SOCKET_INUSE;
-	return ret;
-}
-
-static inline void cs_socket_put(struct pcmcia_socket *skt)
-{
-	if (skt->state & SOCKET_INUSE) {
-		skt->state &= ~SOCKET_INUSE;
-		module_put(skt->owner);
-	}
-}
-
 
 /*
  * Stuff internal to module "pcmcia_core":