3c5xx: convert printk() to pr_<foo>()
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index b61073c..c10ca30 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -125,8 +125,6 @@
#define NET_DEBUG 2
#endif
-#undef DEBUG_IRQ
-
static unsigned int mc32_debug = NET_DEBUG;
/* The number of low I/O ports used by the ethercard. */
@@ -351,15 +349,15 @@
/* Time to play MCA games */
if (mc32_debug && version_printed++ == 0)
- printk(KERN_DEBUG "%s", version);
+ pr_debug("%s", version);
- printk(KERN_INFO "%s: %s found in slot %d:", dev->name, cardname, slot);
+ pr_info("%s: %s found in slot %d: ", dev->name, cardname, slot);
POS = mca_read_stored_pos(slot, 2);
if(!(POS&1))
{
- printk(" disabled.\n");
+ pr_cont("disabled.\n");
return -ENODEV;
}
@@ -370,7 +368,7 @@
POS = mca_read_stored_pos(slot, 4);
if(!(POS&1))
{
- printk("memory window disabled.\n");
+ pr_cont("memory window disabled.\n");
return -ENODEV;
}
@@ -379,7 +377,7 @@
i=(POS>>4)&3;
if(i==3)
{
- printk("invalid memory window.\n");
+ pr_cont("invalid memory window.\n");
return -ENODEV;
}
@@ -392,11 +390,11 @@
if(!request_region(dev->base_addr, MC32_IO_EXTENT, cardname))
{
- printk("io 0x%3lX, which is busy.\n", dev->base_addr);
+ pr_cont("io 0x%3lX, which is busy.\n", dev->base_addr);
return -EBUSY;
}
- printk("io 0x%3lX irq %d mem 0x%lX (%dK)\n",
+ pr_cont("io 0x%3lX irq %d mem 0x%lX (%dK)\n",
dev->base_addr, dev->irq, dev->mem_start, i/1024);
@@ -416,7 +414,7 @@
dev->dev_addr[i] = mca_read_pos(slot,3);
}
- printk("%s: Address %pM", dev->name, dev->dev_addr);
+ pr_info("%s: Address %pM ", dev->name, dev->dev_addr);
mca_write_pos(slot, 6, 0);
mca_write_pos(slot, 7, 0);
@@ -424,9 +422,9 @@
POS = mca_read_stored_pos(slot, 4);
if(POS&2)
- printk(" : BNC port selected.\n");
+ pr_cont(": BNC port selected.\n");
else
- printk(" : AUI port selected.\n");
+ pr_cont(": AUI port selected.\n");
POS=inb(dev->base_addr+HOST_CTRL);
POS|=HOST_CTRL_ATTN|HOST_CTRL_RESET;
@@ -447,7 +445,7 @@
err = request_irq(dev->irq, &mc32_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, DRV_NAME, dev);
if (err) {
release_region(dev->base_addr, MC32_IO_EXTENT);
- printk(KERN_ERR "%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq);
+ pr_err("%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq);
goto err_exit_ports;
}
@@ -463,7 +461,7 @@
i++;
if(i == 1000)
{
- printk(KERN_ERR "%s: failed to boot adapter.\n", dev->name);
+ pr_err("%s: failed to boot adapter.\n", dev->name);
err = -ENODEV;
goto err_exit_irq;
}
@@ -475,10 +473,10 @@
if(base>0)
{
if(base < 0x0C)
- printk(KERN_ERR "%s: %s%s.\n", dev->name, failures[base-1],
+ pr_err("%s: %s%s.\n", dev->name, failures[base-1],
base<0x0A?" test failure":"");
else
- printk(KERN_ERR "%s: unknown failure %d.\n", dev->name, base);
+ pr_err("%s: unknown failure %d.\n", dev->name, base);
err = -ENODEV;
goto err_exit_irq;
}
@@ -494,7 +492,7 @@
udelay(50);
if(n>100)
{
- printk(KERN_ERR "%s: mailbox read fail (%d).\n", dev->name, i);
+ pr_err("%s: mailbox read fail (%d).\n", dev->name, i);
err = -ENODEV;
goto err_exit_irq;
}
@@ -527,7 +525,7 @@
init_completion(&lp->execution_cmd);
init_completion(&lp->xceiver_cmd);
- printk("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n",
+ pr_info("%s: Firmware Rev %d. %d RX buffers, %d TX buffers. Base of 0x%08X.\n",
dev->name, lp->exec_box->data[12], lp->rx_len, lp->tx_len, lp->base);
dev->netdev_ops = &netdev_ops;
@@ -939,7 +937,7 @@
*/
if(mc32_command(dev, 8, descnumbuffs, 4)) {
- printk("%s: %s rejected our buffer configuration!\n",
+ pr_info("%s: %s rejected our buffer configuration!\n",
dev->name, cardname);
mc32_close(dev);
return -ENOBUFS;
@@ -995,7 +993,7 @@
static void mc32_timeout(struct net_device *dev)
{
- printk(KERN_WARNING "%s: transmit timed out?\n", dev->name);
+ pr_warning("%s: transmit timed out?\n", dev->name);
/* Try to restart the adaptor. */
netif_wake_queue(dev);
}
@@ -1335,11 +1333,9 @@
{
status=inb(ioaddr+HOST_CMD);
-#ifdef DEBUG_IRQ
- printk("Status TX%d RX%d EX%d OV%d BC%d\n",
+ pr_debug("Status TX%d RX%d EX%d OV%d BC%d\n",
(status&7), (status>>3)&7, (status>>6)&1,
(status>>7)&1, boguscount);
-#endif
switch(status&7)
{
@@ -1354,7 +1350,7 @@
complete(&lp->xceiver_cmd);
break;
default:
- printk("%s: strange tx ack %d\n", dev->name, status&7);
+ pr_notice("%s: strange tx ack %d\n", dev->name, status&7);
}
status>>=3;
switch(status&7)
@@ -1376,7 +1372,7 @@
mc32_start_transceiver(dev);
break;
default:
- printk("%s: strange rx ack %d\n",
+ pr_notice("%s: strange rx ack %d\n",
dev->name, status&7);
}
status>>=3;