| /* |
| * Copyright (C) 2010 Marvell International Ltd. |
| * Zhangfei Gao <zhangfei.gao@marvell.com> |
| * Kevin Wang <dwang4@marvell.com> |
| * Jun Nie <njun@marvell.com> |
| * Qiming Wu <wuqm@marvell.com> |
| * Philip Rakity <prakity@marvell.com> |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/host.h> |
| #include <linux/platform_data/pxa_sdhci.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| |
| #include "sdhci.h" |
| #include "sdhci-pltfm.h" |
| |
| #define SD_FIFO_PARAM 0xe0 |
| #define DIS_PAD_SD_CLK_GATE 0x0400 /* Turn on/off Dynamic SD Clock Gating */ |
| #define CLK_GATE_ON 0x0200 /* Disable/enable Clock Gate */ |
| #define CLK_GATE_CTL 0x0100 /* Clock Gate Control */ |
| #define CLK_GATE_SETTING_BITS (DIS_PAD_SD_CLK_GATE | \ |
| CLK_GATE_ON | CLK_GATE_CTL) |
| |
| #define SD_CLOCK_BURST_SIZE_SETUP 0xe6 |
| #define SDCLK_SEL_SHIFT 8 |
| #define SDCLK_SEL_MASK 0x3 |
| #define SDCLK_DELAY_SHIFT 10 |
| #define SDCLK_DELAY_MASK 0x3c |
| |
| #define SD_CE_ATA_2 0xea |
| #define MMC_CARD 0x1000 |
| #define MMC_WIDTH 0x0100 |
| |
| static void pxav2_reset(struct sdhci_host *host, u8 mask) |
| { |
| struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); |
| struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; |
| |
| sdhci_reset(host, mask); |
| |
| if (mask == SDHCI_RESET_ALL) { |
| u16 tmp = 0; |
| |
| /* |
| * tune timing of read data/command when crc error happen |
| * no performance impact |
| */ |
| if (pdata && pdata->clk_delay_sel == 1) { |
| tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); |
| |
| tmp &= ~(SDCLK_DELAY_MASK << SDCLK_DELAY_SHIFT); |
| tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK) |
| << SDCLK_DELAY_SHIFT; |
| tmp &= ~(SDCLK_SEL_MASK << SDCLK_SEL_SHIFT); |
| tmp |= (1 & SDCLK_SEL_MASK) << SDCLK_SEL_SHIFT; |
| |
| writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); |
| } |
| |
| if (pdata && (pdata->flags & PXA_FLAG_ENABLE_CLOCK_GATING)) { |
| tmp = readw(host->ioaddr + SD_FIFO_PARAM); |
| tmp &= ~CLK_GATE_SETTING_BITS; |
| writew(tmp, host->ioaddr + SD_FIFO_PARAM); |
| } else { |
| tmp = readw(host->ioaddr + SD_FIFO_PARAM); |
| tmp &= ~CLK_GATE_SETTING_BITS; |
| tmp |= CLK_GATE_SETTING_BITS; |
| writew(tmp, host->ioaddr + SD_FIFO_PARAM); |
| } |
| } |
| } |
| |
| static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width) |
| { |
| u8 ctrl; |
| u16 tmp; |
| |
| ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); |
| tmp = readw(host->ioaddr + SD_CE_ATA_2); |
| if (width == MMC_BUS_WIDTH_8) { |
| ctrl &= ~SDHCI_CTRL_4BITBUS; |
| tmp |= MMC_CARD | MMC_WIDTH; |
| } else { |
| tmp &= ~(MMC_CARD | MMC_WIDTH); |
| if (width == MMC_BUS_WIDTH_4) |
| ctrl |= SDHCI_CTRL_4BITBUS; |
| else |
| ctrl &= ~SDHCI_CTRL_4BITBUS; |
| } |
| writew(tmp, host->ioaddr + SD_CE_ATA_2); |
| writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); |
| } |
| |
| static const struct sdhci_ops pxav2_sdhci_ops = { |
| .set_clock = sdhci_set_clock, |
| .get_max_clock = sdhci_pltfm_clk_get_max_clock, |
| .set_bus_width = pxav2_mmc_set_bus_width, |
| .reset = pxav2_reset, |
| .set_uhs_signaling = sdhci_set_uhs_signaling, |
| }; |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id sdhci_pxav2_of_match[] = { |
| { |
| .compatible = "mrvl,pxav2-mmc", |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, sdhci_pxav2_of_match); |
| |
| static struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev) |
| { |
| struct sdhci_pxa_platdata *pdata; |
| struct device_node *np = dev->of_node; |
| u32 bus_width; |
| u32 clk_delay_cycles; |
| |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return NULL; |
| |
| if (of_find_property(np, "non-removable", NULL)) |
| pdata->flags |= PXA_FLAG_CARD_PERMANENT; |
| |
| of_property_read_u32(np, "bus-width", &bus_width); |
| if (bus_width == 8) |
| pdata->flags |= PXA_FLAG_SD_8_BIT_CAPABLE_SLOT; |
| |
| of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles); |
| if (clk_delay_cycles > 0) { |
| pdata->clk_delay_sel = 1; |
| pdata->clk_delay_cycles = clk_delay_cycles; |
| } |
| |
| return pdata; |
| } |
| #else |
| static inline struct sdhci_pxa_platdata *pxav2_get_mmc_pdata(struct device *dev) |
| { |
| return NULL; |
| } |
| #endif |
| |
| static int sdhci_pxav2_probe(struct platform_device *pdev) |
| { |
| struct sdhci_pltfm_host *pltfm_host; |
| struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; |
| struct device *dev = &pdev->dev; |
| struct sdhci_host *host = NULL; |
| const struct of_device_id *match; |
| |
| int ret; |
| struct clk *clk; |
| |
| host = sdhci_pltfm_init(pdev, NULL, 0); |
| if (IS_ERR(host)) |
| return PTR_ERR(host); |
| |
| pltfm_host = sdhci_priv(host); |
| |
| clk = clk_get(dev, "PXA-SDHCLK"); |
| if (IS_ERR(clk)) { |
| dev_err(dev, "failed to get io clock\n"); |
| ret = PTR_ERR(clk); |
| goto err_clk_get; |
| } |
| pltfm_host->clk = clk; |
| clk_prepare_enable(clk); |
| |
| host->quirks = SDHCI_QUIRK_BROKEN_ADMA |
| | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
| | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN; |
| |
| match = of_match_device(of_match_ptr(sdhci_pxav2_of_match), &pdev->dev); |
| if (match) { |
| pdata = pxav2_get_mmc_pdata(dev); |
| } |
| if (pdata) { |
| if (pdata->flags & PXA_FLAG_CARD_PERMANENT) { |
| /* on-chip device */ |
| host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; |
| host->mmc->caps |= MMC_CAP_NONREMOVABLE; |
| } |
| |
| /* If slot design supports 8 bit data, indicate this to MMC. */ |
| if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) |
| host->mmc->caps |= MMC_CAP_8_BIT_DATA; |
| |
| if (pdata->quirks) |
| host->quirks |= pdata->quirks; |
| if (pdata->host_caps) |
| host->mmc->caps |= pdata->host_caps; |
| if (pdata->pm_caps) |
| host->mmc->pm_caps |= pdata->pm_caps; |
| } |
| |
| host->ops = &pxav2_sdhci_ops; |
| |
| ret = sdhci_add_host(host); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to add host\n"); |
| goto err_add_host; |
| } |
| |
| platform_set_drvdata(pdev, host); |
| |
| return 0; |
| |
| err_add_host: |
| clk_disable_unprepare(clk); |
| clk_put(clk); |
| err_clk_get: |
| sdhci_pltfm_free(pdev); |
| return ret; |
| } |
| |
| static int sdhci_pxav2_remove(struct platform_device *pdev) |
| { |
| struct sdhci_host *host = platform_get_drvdata(pdev); |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| |
| sdhci_remove_host(host, 1); |
| |
| clk_disable_unprepare(pltfm_host->clk); |
| clk_put(pltfm_host->clk); |
| sdhci_pltfm_free(pdev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver sdhci_pxav2_driver = { |
| .driver = { |
| .name = "sdhci-pxav2", |
| .of_match_table = of_match_ptr(sdhci_pxav2_of_match), |
| .pm = &sdhci_pltfm_pmops, |
| }, |
| .probe = sdhci_pxav2_probe, |
| .remove = sdhci_pxav2_remove, |
| }; |
| |
| module_platform_driver(sdhci_pxav2_driver); |
| |
| MODULE_DESCRIPTION("SDHCI driver for pxav2"); |
| MODULE_AUTHOR("Marvell International Ltd."); |
| MODULE_LICENSE("GPL v2"); |
| |