kconfig: fix path to modules.txt in Kconfig help
Documentation/modules.txt doesn't exist, but
Documentation/kbuild/modules.txt does.
Signed-off-by: Alexander E. Patrakov
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 690c942..ff642f8 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -49,8 +49,8 @@
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module will
- be called ms02-nv.o.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called ms02-nv.ko.
config MTD_DATAFLASH
tristate "Support for AT45xxx DataFlash"
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index dcdad21..ad9a136 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -833,8 +833,8 @@
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc91x. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/networking/net-modules.txt>.
+ module, say M here and read <file:Documentation/kbuild/modules.txt>
+ as well as <file:Documentation/networking/net-modules.txt>.
config SMC9194
tristate "SMC 9194 support"
@@ -889,7 +889,7 @@
This driver is also available as a module. The module will be
called smc911x. If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>
+ here and read <file:Documentation/kbuild/modules.txt>
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index c4b3dc2..0184614 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -153,8 +153,8 @@
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ipw2100.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called ipw2100.ko.
config IPW2100_MONITOR
bool "Enable promiscuous mode"
@@ -208,8 +208,8 @@
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called ipw2200.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called ipw2200.ko.
config IPW2200_MONITOR
bool "Enable promiscuous mode"
@@ -517,8 +517,8 @@
If you want to compile the driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt>. The module
- will be called prism54.ko.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
+ The module will be called prism54.ko.
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index fcc4cb6..72fb5ec 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -170,7 +170,7 @@
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
- say M here and read <file:Documentation/modules.txt> and
+ say M here and read <file:Documentation/kbuild/modules.txt> and
<file:Documentation/scsi.txt>. The module will be called ch.o.
If unsure, say N.
@@ -1793,7 +1793,7 @@
This driver is also available as a module. This module will be
called zfcp. If you want to compile it as a module, say M here
- and read <file:Documentation/modules.txt>.
+ and read <file:Documentation/kbuild/modules.txt>.
config SCSI_SRP
tristate "SCSI RDMA Protocol helper library"
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index b1cb72c..05890dc 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -191,7 +191,7 @@
If you want to compile this as a module (=code which can be
inserted into and removed from the running kernel), say M
- here and read <file:Documentation/modules.txt>. The module
+ here and read <file:Documentation/kbuild/modules.txt>. The module
will be called amba-clcd.
choice
@@ -1491,7 +1491,7 @@
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called pxafb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
@@ -1544,7 +1544,7 @@
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called w100fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
@@ -1561,7 +1561,7 @@
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called s3c2410fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
config FB_S3C2410_DEBUG
diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig
index da07e9a..bbe99f8 100644
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
@@ -198,7 +198,7 @@
and OUTPUT chains.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
endmenu
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index c558f32..ea6211c 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -100,7 +100,7 @@
tracking code will be able to do state tracking on SCTP connections.
If you want to compile it as a module, say M here and read
- Documentation/modules.txt. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NF_CONNTRACK_AMANDA
tristate "Amanda backup protocol support"
@@ -279,8 +279,8 @@
affects the connection mark value rather than the packet mark value.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. The module will be called
- ipt_CONNMARK.o. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. The module will be called
+ ipt_CONNMARK.ko. If unsure, say `N'.
config NETFILTER_XT_TARGET_DSCP
tristate '"DSCP" target support'
@@ -341,7 +341,7 @@
no protocol helpers for the selected packets).
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_TARGET_SECMARK
tristate '"SECMARK" target support'
@@ -397,7 +397,7 @@
comments in your iptables ruleset.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_MATCH_CONNBYTES
tristate '"connbytes" per-connection counter match support'
@@ -409,7 +409,7 @@
number of bytes and/or packets for each direction within a connection.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_MATCH_CONNMARK
tristate '"connmark" connection mark match support'
@@ -421,8 +421,8 @@
connection mark value previously set for the session by `CONNMARK'.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. The module will be called
- ipt_connmark.o. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. The module will be called
+ ipt_connmark.ko. If unsure, say `N'.
config NETFILTER_XT_MATCH_CONNTRACK
tristate '"conntrack" connection tracking match support'
@@ -446,7 +446,7 @@
and DCCP flags.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_MATCH_DSCP
tristate '"DSCP" match support'
@@ -565,7 +565,7 @@
byte counter.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_MATCH_REALM
tristate '"realm" match support'
@@ -579,7 +579,7 @@
in tc world.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_MATCH_SCTP
tristate '"sctp" protocol match support (EXPERIMENTAL)'
@@ -590,7 +590,7 @@
and SCTP chunk types.
If you want to compile it as a module, say M here and read
- <file:Documentation/modules.txt>. If unsure, say `N'.
+ <file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config NETFILTER_XT_MATCH_STATE
tristate '"state" match support'
diff --git a/net/tipc/Kconfig b/net/tipc/Kconfig
index 3891cc0..f9e367d 100644
--- a/net/tipc/Kconfig
+++ b/net/tipc/Kconfig
@@ -18,7 +18,7 @@
This protocol support is also available as a module ( = code which
can be inserted in and removed from the running kernel whenever you
want). The module will be called tipc. If you want to compile it
- as a module, say M here and read <file:Documentation/modules.txt>.
+ as a module, say M here and read <file:Documentation/kbuild/modules.txt>.
If in doubt, say N.