| /* |
| ************************************************************************* |
| * Ralink Tech Inc. |
| * 5F., No.36, Taiyuan St., Jhubei City, |
| * Hsinchu County 302, |
| * Taiwan, R.O.C. |
| * |
| * (c) Copyright 2002-2007, Ralink Technology, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify * |
| * it under the terms of the GNU General Public License as published by * |
| * the Free Software Foundation; either version 2 of the License, or * |
| * (at your option) any later version. * |
| * * |
| * This program is distributed in the hope that it will be useful, * |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of * |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * |
| * GNU General Public License for more details. * |
| * * |
| * You should have received a copy of the GNU General Public License * |
| * along with this program; if not, write to the * |
| * Free Software Foundation, Inc., * |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * |
| * * |
| ************************************************************************* |
| |
| Module Name: |
| rt28xx.h |
| |
| Abstract: |
| RT28xx ASIC related definition & structures |
| |
| Revision History: |
| Who When What |
| -------- ---------- ---------------------------------------------- |
| Jan Lee Jan-3-2006 created for RT2860c |
| */ |
| |
| #ifndef __RT28XX_H__ |
| #define __RT28XX_H__ |
| |
| |
| // |
| // PCI registers - base address 0x0000 |
| // |
| #define PCI_CFG 0x0000 |
| #define PCI_EECTRL 0x0004 |
| #define PCI_MCUCTRL 0x0008 |
| |
| #ifdef RT30xx |
| #define OPT_14 0x114 |
| |
| typedef int NTSTATUS; |
| #define RETRY_LIMIT 10 |
| #define STATUS_SUCCESS 0x00 |
| #define STATUS_UNSUCCESSFUL 0x01 |
| #endif |
| |
| // |
| // SCH/DMA registers - base address 0x0200 |
| // |
| // INT_SOURCE_CSR: Interrupt source register. Write one to clear corresponding bit |
| // |
| #define DMA_CSR0 0x200 |
| #define INT_SOURCE_CSR 0x200 |
| typedef union _INT_SOURCE_CSR_STRUC { |
| struct { |
| UINT32 RxDelayINT:1; |
| UINT32 TxDelayINT:1; |
| UINT32 RxDone:1; |
| UINT32 Ac0DmaDone:1;//4 |
| UINT32 Ac1DmaDone:1; |
| UINT32 Ac2DmaDone:1; |
| UINT32 Ac3DmaDone:1; |
| UINT32 HccaDmaDone:1; // bit7 |
| UINT32 MgmtDmaDone:1; |
| UINT32 MCUCommandINT:1;//bit 9 |
| UINT32 RxTxCoherent:1; |
| UINT32 TBTTInt:1; |
| UINT32 PreTBTT:1; |
| UINT32 TXFifoStatusInt:1;//FIFO Statistics is full, sw should read 0x171c |
| UINT32 AutoWakeup:1;//bit14 |
| UINT32 GPTimer:1; |
| UINT32 RxCoherent:1;//bit16 |
| UINT32 TxCoherent:1; |
| UINT32 :14; |
| } field; |
| UINT32 word; |
| } INT_SOURCE_CSR_STRUC, *PINT_SOURCE_CSR_STRUC; |
| |
| // |
| // INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF |
| // |
| #define INT_MASK_CSR 0x204 |
| typedef union _INT_MASK_CSR_STRUC { |
| struct { |
| UINT32 RXDelay_INT_MSK:1; |
| UINT32 TxDelay:1; |
| UINT32 RxDone:1; |
| UINT32 Ac0DmaDone:1; |
| UINT32 Ac1DmaDone:1; |
| UINT32 Ac2DmaDone:1; |
| UINT32 Ac3DmaDone:1; |
| UINT32 HccaDmaDone:1; |
| UINT32 MgmtDmaDone:1; |
| UINT32 MCUCommandINT:1; |
| UINT32 :20; |
| UINT32 RxCoherent:1; |
| UINT32 TxCoherent:1; |
| } field; |
| UINT32 word; |
| } INT_MASK_CSR_STRUC, *PINT_MASK_CSR_STRUC; |
| |
| #define WPDMA_GLO_CFG 0x208 |
| typedef union _WPDMA_GLO_CFG_STRUC { |
| struct { |
| UINT32 EnableTxDMA:1; |
| UINT32 TxDMABusy:1; |
| UINT32 EnableRxDMA:1; |
| UINT32 RxDMABusy:1; |
| UINT32 WPDMABurstSIZE:2; |
| UINT32 EnTXWriteBackDDONE:1; |
| UINT32 BigEndian:1; |
| UINT32 RXHdrScater:8; |
| UINT32 HDR_SEG_LEN:16; |
| } field; |
| UINT32 word; |
| } WPDMA_GLO_CFG_STRUC, *PWPDMA_GLO_CFG_STRUC; |
| |
| #define WPDMA_RST_IDX 0x20c |
| typedef union _WPDMA_RST_IDX_STRUC { |
| struct { |
| UINT32 RST_DTX_IDX0:1; |
| UINT32 RST_DTX_IDX1:1; |
| UINT32 RST_DTX_IDX2:1; |
| UINT32 RST_DTX_IDX3:1; |
| UINT32 RST_DTX_IDX4:1; |
| UINT32 RST_DTX_IDX5:1; |
| UINT32 rsv:10; |
| UINT32 RST_DRX_IDX0:1; |
| UINT32 :15; |
| } field; |
| UINT32 word; |
| } WPDMA_RST_IDX_STRUC, *PWPDMA_RST_IDX_STRUC; |
| |
| #define DELAY_INT_CFG 0x0210 |
| typedef union _DELAY_INT_CFG_STRUC { |
| struct { |
| UINT32 RXMAX_PTIME:8; |
| UINT32 RXMAX_PINT:7; |
| UINT32 RXDLY_INT_EN:1; |
| UINT32 TXMAX_PTIME:8; |
| UINT32 TXMAX_PINT:7; |
| UINT32 TXDLY_INT_EN:1; |
| } field; |
| UINT32 word; |
| } DELAY_INT_CFG_STRUC, *PDELAY_INT_CFG_STRUC; |
| |
| #define WMM_AIFSN_CFG 0x0214 |
| typedef union _AIFSN_CSR_STRUC { |
| struct { |
| UINT32 Aifsn0:4; // for AC_BE |
| UINT32 Aifsn1:4; // for AC_BK |
| UINT32 Aifsn2:4; // for AC_VI |
| UINT32 Aifsn3:4; // for AC_VO |
| UINT32 Rsv:16; |
| } field; |
| UINT32 word; |
| } AIFSN_CSR_STRUC, *PAIFSN_CSR_STRUC; |
| |
| // |
| // CWMIN_CSR: CWmin for each EDCA AC |
| // |
| #define WMM_CWMIN_CFG 0x0218 |
| typedef union _CWMIN_CSR_STRUC { |
| struct { |
| UINT32 Cwmin0:4; // for AC_BE |
| UINT32 Cwmin1:4; // for AC_BK |
| UINT32 Cwmin2:4; // for AC_VI |
| UINT32 Cwmin3:4; // for AC_VO |
| UINT32 Rsv:16; |
| } field; |
| UINT32 word; |
| } CWMIN_CSR_STRUC, *PCWMIN_CSR_STRUC; |
| |
| // |
| // CWMAX_CSR: CWmin for each EDCA AC |
| // |
| #define WMM_CWMAX_CFG 0x021c |
| typedef union _CWMAX_CSR_STRUC { |
| struct { |
| UINT32 Cwmax0:4; // for AC_BE |
| UINT32 Cwmax1:4; // for AC_BK |
| UINT32 Cwmax2:4; // for AC_VI |
| UINT32 Cwmax3:4; // for AC_VO |
| UINT32 Rsv:16; |
| } field; |
| UINT32 word; |
| } CWMAX_CSR_STRUC, *PCWMAX_CSR_STRUC; |
| |
| // |
| // AC_TXOP_CSR0: AC_BK/AC_BE TXOP register |
| // |
| #define WMM_TXOP0_CFG 0x0220 |
| typedef union _AC_TXOP_CSR0_STRUC { |
| struct { |
| USHORT Ac0Txop; // for AC_BK, in unit of 32us |
| USHORT Ac1Txop; // for AC_BE, in unit of 32us |
| } field; |
| UINT32 word; |
| } AC_TXOP_CSR0_STRUC, *PAC_TXOP_CSR0_STRUC; |
| |
| // |
| // AC_TXOP_CSR1: AC_VO/AC_VI TXOP register |
| // |
| #define WMM_TXOP1_CFG 0x0224 |
| typedef union _AC_TXOP_CSR1_STRUC { |
| struct { |
| USHORT Ac2Txop; // for AC_VI, in unit of 32us |
| USHORT Ac3Txop; // for AC_VO, in unit of 32us |
| } field; |
| UINT32 word; |
| } AC_TXOP_CSR1_STRUC, *PAC_TXOP_CSR1_STRUC; |
| |
| #define RINGREG_DIFF 0x10 |
| #define GPIO_CTRL_CFG 0x0228 //MAC_CSR13 |
| #define MCU_CMD_CFG 0x022c |
| #define TX_BASE_PTR0 0x0230 //AC_BK base address |
| #define TX_MAX_CNT0 0x0234 |
| #define TX_CTX_IDX0 0x0238 |
| #define TX_DTX_IDX0 0x023c |
| #define TX_BASE_PTR1 0x0240 //AC_BE base address |
| #define TX_MAX_CNT1 0x0244 |
| #define TX_CTX_IDX1 0x0248 |
| #define TX_DTX_IDX1 0x024c |
| #define TX_BASE_PTR2 0x0250 //AC_VI base address |
| #define TX_MAX_CNT2 0x0254 |
| #define TX_CTX_IDX2 0x0258 |
| #define TX_DTX_IDX2 0x025c |
| #define TX_BASE_PTR3 0x0260 //AC_VO base address |
| #define TX_MAX_CNT3 0x0264 |
| #define TX_CTX_IDX3 0x0268 |
| #define TX_DTX_IDX3 0x026c |
| #define TX_BASE_PTR4 0x0270 //HCCA base address |
| #define TX_MAX_CNT4 0x0274 |
| #define TX_CTX_IDX4 0x0278 |
| #define TX_DTX_IDX4 0x027c |
| #define TX_BASE_PTR5 0x0280 //MGMT base address |
| #define TX_MAX_CNT5 0x0284 |
| #define TX_CTX_IDX5 0x0288 |
| #define TX_DTX_IDX5 0x028c |
| #define TX_MGMTMAX_CNT TX_MAX_CNT5 |
| #define TX_MGMTCTX_IDX TX_CTX_IDX5 |
| #define TX_MGMTDTX_IDX TX_DTX_IDX5 |
| #define RX_BASE_PTR 0x0290 //RX base address |
| #define RX_MAX_CNT 0x0294 |
| #define RX_CRX_IDX 0x0298 |
| #define RX_DRX_IDX 0x029c |
| #define USB_DMA_CFG 0x02a0 |
| |
| typedef union _USB_DMA_CFG_STRUC { |
| struct { |
| UINT32 RxBulkAggTOut:8; //Rx Bulk Aggregation TimeOut in unit of 33ns |
| UINT32 RxBulkAggLmt:8; //Rx Bulk Aggregation Limit in unit of 256 bytes |
| UINT32 phyclear:1; //phy watch dog enable. write 1 |
| UINT32 rsv:2; |
| UINT32 TxClear:1; //Clear USB DMA TX path |
| UINT32 TxopHalt:1; //Halt TXOP count down when TX buffer is full. |
| UINT32 RxBulkAggEn:1; //Enable Rx Bulk Aggregation |
| UINT32 RxBulkEn:1; //Enable USB DMA Rx |
| UINT32 TxBulkEn:1; //Enable USB DMA Tx |
| UINT32 EpoutValid:6; //OUT endpoint data valid |
| UINT32 RxBusy:1; //USB DMA RX FSM busy |
| UINT32 TxBusy:1; //USB DMA TX FSM busy |
| } field; |
| UINT32 word; |
| } USB_DMA_CFG_STRUC, *PUSB_DMA_CFG_STRUC; |
| |
| // |
| // 3 PBF registers |
| // |
| // |
| // Most are for debug. Driver doesn't touch PBF register. |
| #define PBF_SYS_CTRL 0x0400 |
| #define PBF_CFG 0x0408 |
| #define PBF_MAX_PCNT 0x040C |
| #define PBF_CTRL 0x0410 |
| #define PBF_INT_STA 0x0414 |
| #define PBF_INT_ENA 0x0418 |
| #define TXRXQ_PCNT 0x0438 |
| #define PBF_DBG 0x043c |
| #define PBF_CAP_CTRL 0x0440 |
| |
| #ifdef RT30xx |
| // eFuse registers |
| #define EFUSE_CTRL 0x0580 |
| #define EFUSE_DATA0 0x0590 |
| #define EFUSE_DATA1 0x0594 |
| #define EFUSE_DATA2 0x0598 |
| #define EFUSE_DATA3 0x059c |
| #define EFUSE_USAGE_MAP_START 0x2d0 |
| #define EFUSE_USAGE_MAP_END 0x2fc |
| #define EFUSE_TAG 0x2fe |
| #define EFUSE_USAGE_MAP_SIZE 45 |
| |
| typedef union _EFUSE_CTRL_STRUC { |
| struct { |
| UINT32 EFSROM_AOUT:6; |
| UINT32 EFSROM_MODE:2; |
| UINT32 EFSROM_LDO_OFF_TIME:6; |
| UINT32 EFSROM_LDO_ON_TIME:2; |
| UINT32 EFSROM_AIN:10; |
| UINT32 RESERVED:4; |
| UINT32 EFSROM_KICK:1; |
| UINT32 SEL_EFUSE:1; |
| } field; |
| UINT32 word; |
| } EFUSE_CTRL_STRUC, *PEFUSE_CTRL_STRUC; |
| |
| #define LDO_CFG0 0x05d4 |
| #define GPIO_SWITCH 0x05dc |
| #endif /* RT30xx */ |
| |
| // |
| // 4 MAC registers |
| // |
| // |
| // 4.1 MAC SYSTEM configuration registers (offset:0x1000) |
| // |
| #define MAC_CSR0 0x1000 |
| typedef union _ASIC_VER_ID_STRUC { |
| struct { |
| USHORT ASICRev; // reversion : 0 |
| USHORT ASICVer; // version : 2860 |
| } field; |
| UINT32 word; |
| } ASIC_VER_ID_STRUC, *PASIC_VER_ID_STRUC; |
| |
| #define MAC_SYS_CTRL 0x1004 //MAC_CSR1 |
| #define MAC_ADDR_DW0 0x1008 // MAC ADDR DW0 |
| #define MAC_ADDR_DW1 0x100c // MAC ADDR DW1 |
| // |
| // MAC_CSR2: STA MAC register 0 |
| // |
| typedef union _MAC_DW0_STRUC { |
| struct { |
| UCHAR Byte0; // MAC address byte 0 |
| UCHAR Byte1; // MAC address byte 1 |
| UCHAR Byte2; // MAC address byte 2 |
| UCHAR Byte3; // MAC address byte 3 |
| } field; |
| UINT32 word; |
| } MAC_DW0_STRUC, *PMAC_DW0_STRUC; |
| |
| // |
| // MAC_CSR3: STA MAC register 1 |
| // |
| typedef union _MAC_DW1_STRUC { |
| struct { |
| UCHAR Byte4; // MAC address byte 4 |
| UCHAR Byte5; // MAC address byte 5 |
| UCHAR U2MeMask; |
| UCHAR Rsvd1; |
| } field; |
| UINT32 word; |
| } MAC_DW1_STRUC, *PMAC_DW1_STRUC; |
| |
| #define MAC_BSSID_DW0 0x1010 // MAC BSSID DW0 |
| #define MAC_BSSID_DW1 0x1014 // MAC BSSID DW1 |
| |
| // |
| // MAC_CSR5: BSSID register 1 |
| // |
| typedef union _MAC_CSR5_STRUC { |
| struct { |
| UCHAR Byte4; // BSSID byte 4 |
| UCHAR Byte5; // BSSID byte 5 |
| USHORT BssIdMask:2; // 0: one BSSID, 10: 4 BSSID, 01: 2 BSSID , 11: 8BSSID |
| USHORT MBssBcnNum:3; |
| USHORT Rsvd:11; |
| } field; |
| UINT32 word; |
| } MAC_CSR5_STRUC, *PMAC_CSR5_STRUC; |
| |
| #define MAX_LEN_CFG 0x1018 // rt2860b max 16k bytes. bit12:13 Maximum PSDU length (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 |
| #define BBP_CSR_CFG 0x101c // |
| // |
| // BBP_CSR_CFG: BBP serial control register |
| // |
| typedef union _BBP_CSR_CFG_STRUC { |
| struct { |
| UINT32 Value:8; // Register value to program into BBP |
| UINT32 RegNum:8; // Selected BBP register |
| UINT32 fRead:1; // 0: Write BBP, 1: Read BBP |
| UINT32 Busy:1; // 1: ASIC is busy execute BBP programming. |
| UINT32 BBP_PAR_DUR:1; // 0: 4 MAC clock cycles 1: 8 MAC clock cycles |
| UINT32 BBP_RW_MODE:1; // 0: use serial mode 1:parallel |
| UINT32 :12; |
| } field; |
| UINT32 word; |
| } BBP_CSR_CFG_STRUC, *PBBP_CSR_CFG_STRUC; |
| |
| #define RF_CSR_CFG0 0x1020 |
| // |
| // RF_CSR_CFG: RF control register |
| // |
| typedef union _RF_CSR_CFG0_STRUC { |
| struct { |
| UINT32 RegIdAndContent:24; // Register value to program into BBP |
| UINT32 bitwidth:5; // Selected BBP register |
| UINT32 StandbyMode:1; // 0: high when stand by 1: low when standby |
| UINT32 Sel:1; // 0:RF_LE0 activate 1:RF_LE1 activate |
| UINT32 Busy:1; // 0: idle 1: 8busy |
| } field; |
| UINT32 word; |
| } RF_CSR_CFG0_STRUC, *PRF_CSR_CFG0_STRUC; |
| |
| #define RF_CSR_CFG1 0x1024 |
| typedef union _RF_CSR_CFG1_STRUC { |
| struct { |
| UINT32 RegIdAndContent:24; // Register value to program into BBP |
| UINT32 RFGap:5; // Gap between BB_CONTROL_RF and RF_LE. 0: 3 system clock cycle (37.5usec) 1: 5 system clock cycle (62.5usec) |
| UINT32 rsv:7; // 0: idle 1: 8busy |
| } field; |
| UINT32 word; |
| } RF_CSR_CFG1_STRUC, *PRF_CSR_CFG1_STRUC; |
| |
| #define RF_CSR_CFG2 0x1028 // |
| typedef union _RF_CSR_CFG2_STRUC { |
| struct { |
| UINT32 RegIdAndContent:24; // Register value to program into BBP |
| UINT32 rsv:8; // 0: idle 1: 8busy |
| } field; |
| UINT32 word; |
| } RF_CSR_CFG2_STRUC, *PRF_CSR_CFG2_STRUC; |
| |
| #define LED_CFG 0x102c // MAC_CSR14 |
| typedef union _LED_CFG_STRUC { |
| struct { |
| UINT32 OnPeriod:8; // blinking on period unit 1ms |
| UINT32 OffPeriod:8; // blinking off period unit 1ms |
| UINT32 SlowBlinkPeriod:6; // slow blinking period. unit:1ms |
| UINT32 rsv:2; |
| UINT32 RLedMode:2; // red Led Mode 0: off1: blinking upon TX2: periodic slow blinking3: always on |
| UINT32 GLedMode:2; // green Led Mode |
| UINT32 YLedMode:2; // yellow Led Mode |
| UINT32 LedPolar:1; // Led Polarity. 0: active low1: active high |
| UINT32 :1; |
| } field; |
| UINT32 word; |
| } LED_CFG_STRUC, *PLED_CFG_STRUC; |
| |
| // |
| // 4.2 MAC TIMING configuration registers (offset:0x1100) |
| // |
| #define XIFS_TIME_CFG 0x1100 // MAC_CSR8 MAC_CSR9 |
| typedef union _IFS_SLOT_CFG_STRUC { |
| struct { |
| UINT32 CckmSifsTime:8; // unit 1us. Applied after CCK RX/TX |
| UINT32 OfdmSifsTime:8; // unit 1us. Applied after OFDM RX/TX |
| UINT32 OfdmXifsTime:4; //OFDM SIFS. unit 1us. Applied after OFDM RX when MAC doesn't reference BBP signal BBRXEND |
| UINT32 EIFS:9; // unit 1us |
| UINT32 BBRxendEnable:1; // reference RXEND signal to begin XIFS defer |
| UINT32 rsv:2; |
| } field; |
| UINT32 word; |
| } IFS_SLOT_CFG_STRUC, *PIFS_SLOT_CFG_STRUC; |
| |
| #define BKOFF_SLOT_CFG 0x1104 // mac_csr9 last 8 bits |
| #define NAV_TIME_CFG 0x1108 // NAV (MAC_CSR15) |
| #define CH_TIME_CFG 0x110C // Count as channel busy |
| #define PBF_LIFE_TIMER 0x1110 //TX/RX MPDU timestamp timer (free run)Unit: 1us |
| #define BCN_TIME_CFG 0x1114 // TXRX_CSR9 |
| |
| #define BCN_OFFSET0 0x042C |
| #define BCN_OFFSET1 0x0430 |
| |
| // |
| // BCN_TIME_CFG : Synchronization control register |
| // |
| typedef union _BCN_TIME_CFG_STRUC { |
| struct { |
| UINT32 BeaconInterval:16; // in unit of 1/16 TU |
| UINT32 bTsfTicking:1; // Enable TSF auto counting |
| UINT32 TsfSyncMode:2; // Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode |
| UINT32 bTBTTEnable:1; |
| UINT32 bBeaconGen:1; // Enable beacon generator |
| UINT32 :3; |
| UINT32 TxTimestampCompensate:8; |
| } field; |
| UINT32 word; |
| } BCN_TIME_CFG_STRUC, *PBCN_TIME_CFG_STRUC; |
| |
| #define TBTT_SYNC_CFG 0x1118 // txrx_csr10 |
| #define TSF_TIMER_DW0 0x111C // Local TSF timer lsb 32 bits. Read-only |
| #define TSF_TIMER_DW1 0x1120 // msb 32 bits. Read-only. |
| #define TBTT_TIMER 0x1124 // TImer remains till next TBTT. Read-only. TXRX_CSR14 |
| #define INT_TIMER_CFG 0x1128 // |
| #define INT_TIMER_EN 0x112c // GP-timer and pre-tbtt Int enable |
| #define CH_IDLE_STA 0x1130 // channel idle time |
| #define CH_BUSY_STA 0x1134 // channle busy time |
| // |
| // 4.2 MAC POWER configuration registers (offset:0x1200) |
| // |
| #define MAC_STATUS_CFG 0x1200 // old MAC_CSR12 |
| #define PWR_PIN_CFG 0x1204 // old MAC_CSR12 |
| #define AUTO_WAKEUP_CFG 0x1208 // old MAC_CSR10 |
| // |
| // AUTO_WAKEUP_CFG: Manual power control / status register |
| // |
| typedef union _AUTO_WAKEUP_STRUC { |
| struct { |
| UINT32 AutoLeadTime:8; |
| UINT32 NumofSleepingTbtt:7; // ForceWake has high privilege than PutToSleep when both set |
| UINT32 EnableAutoWakeup:1; // 0:sleep, 1:awake |
| UINT32 :16; |
| } field; |
| UINT32 word; |
| } AUTO_WAKEUP_STRUC, *PAUTO_WAKEUP_STRUC; |
| |
| // |
| // 4.3 MAC TX configuration registers (offset:0x1300) |
| // |
| |
| #define EDCA_AC0_CFG 0x1300 //AC_TXOP_CSR0 0x3474 |
| #define EDCA_AC1_CFG 0x1304 |
| #define EDCA_AC2_CFG 0x1308 |
| #define EDCA_AC3_CFG 0x130c |
| typedef union _EDCA_AC_CFG_STRUC { |
| struct { |
| UINT32 AcTxop:8; // in unit of 32us |
| UINT32 Aifsn:4; // # of slot time |
| UINT32 Cwmin:4; // |
| UINT32 Cwmax:4; //unit power of 2 |
| UINT32 :12; // |
| } field; |
| UINT32 word; |
| } EDCA_AC_CFG_STRUC, *PEDCA_AC_CFG_STRUC; |
| |
| #define EDCA_TID_AC_MAP 0x1310 |
| #define TX_PWR_CFG_0 0x1314 |
| #define TX_PWR_CFG_1 0x1318 |
| #define TX_PWR_CFG_2 0x131C |
| #define TX_PWR_CFG_3 0x1320 |
| #define TX_PWR_CFG_4 0x1324 |
| #define TX_PIN_CFG 0x1328 |
| #define TX_BAND_CFG 0x132c // 0x1 use upper 20MHz. 0 juse lower 20MHz |
| #define TX_SW_CFG0 0x1330 |
| #define TX_SW_CFG1 0x1334 |
| #define TX_SW_CFG2 0x1338 |
| #define TXOP_THRES_CFG 0x133c |
| #define TXOP_CTRL_CFG 0x1340 |
| #define TX_RTS_CFG 0x1344 |
| |
| typedef union _TX_RTS_CFG_STRUC { |
| struct { |
| UINT32 AutoRtsRetryLimit:8; |
| UINT32 RtsThres:16; // unit:byte |
| UINT32 RtsFbkEn:1; // enable rts rate fallback |
| UINT32 rsv:7; // 1: HT non-STBC control frame enable |
| } field; |
| UINT32 word; |
| } TX_RTS_CFG_STRUC, *PTX_RTS_CFG_STRUC; |
| |
| #define TX_TIMEOUT_CFG 0x1348 |
| typedef union _TX_TIMEOUT_CFG_STRUC { |
| struct { |
| UINT32 rsv:4; |
| UINT32 MpduLifeTime:4; // expiration time = 2^(9+MPDU LIFE TIME) us |
| UINT32 RxAckTimeout:8; // unit:slot. Used for TX precedure |
| UINT32 TxopTimeout:8; //TXOP timeout value for TXOP truncation. It is recommended that (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) |
| UINT32 rsv2:8; // 1: HT non-STBC control frame enable |
| } field; |
| UINT32 word; |
| } TX_TIMEOUT_CFG_STRUC, *PTX_TIMEOUT_CFG_STRUC; |
| |
| #define TX_RTY_CFG 0x134c |
| typedef union PACKED _TX_RTY_CFG_STRUC { |
| struct { |
| UINT32 ShortRtyLimit:8; // short retry limit |
| UINT32 LongRtyLimit:8; //long retry limit |
| UINT32 LongRtyThre:12; // Long retry threshoold |
| UINT32 NonAggRtyMode:1; // Non-Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer |
| UINT32 AggRtyMode:1; // Aggregate MPDU retry mode. 0:expired by retry limit, 1: expired by mpdu life timer |
| UINT32 TxautoFBEnable:1; // Tx retry PHY rate auto fallback enable |
| UINT32 rsv:1; // 1: HT non-STBC control frame enable |
| } field; |
| UINT32 word; |
| } TX_RTY_CFG_STRUC, *PTX_RTY_CFG_STRUC; |
| |
| #define TX_LINK_CFG 0x1350 |
| typedef union PACKED _TX_LINK_CFG_STRUC { |
| struct PACKED { |
| UINT32 RemoteMFBLifeTime:8; //remote MFB life time. unit : 32us |
| UINT32 MFBEnable:1; // TX apply remote MFB 1:enable |
| UINT32 RemoteUMFSEnable:1; // remote unsolicit MFB enable. 0: not apply remote remote unsolicit (MFS=7) |
| UINT32 TxMRQEn:1; // MCS request TX enable |
| UINT32 TxRDGEn:1; // RDG TX enable |
| UINT32 TxCFAckEn:1; // Piggyback CF-ACK enable |
| UINT32 rsv:3; // |
| UINT32 RemotMFB:8; // remote MCS feedback |
| UINT32 RemotMFS:8; //remote MCS feedback sequence number |
| } field; |
| UINT32 word; |
| } TX_LINK_CFG_STRUC, *PTX_LINK_CFG_STRUC; |
| |
| #define HT_FBK_CFG0 0x1354 |
| typedef union PACKED _HT_FBK_CFG0_STRUC { |
| struct { |
| UINT32 HTMCS0FBK:4; |
| UINT32 HTMCS1FBK:4; |
| UINT32 HTMCS2FBK:4; |
| UINT32 HTMCS3FBK:4; |
| UINT32 HTMCS4FBK:4; |
| UINT32 HTMCS5FBK:4; |
| UINT32 HTMCS6FBK:4; |
| UINT32 HTMCS7FBK:4; |
| } field; |
| UINT32 word; |
| } HT_FBK_CFG0_STRUC, *PHT_FBK_CFG0_STRUC; |
| |
| #define HT_FBK_CFG1 0x1358 |
| typedef union _HT_FBK_CFG1_STRUC { |
| struct { |
| UINT32 HTMCS8FBK:4; |
| UINT32 HTMCS9FBK:4; |
| UINT32 HTMCS10FBK:4; |
| UINT32 HTMCS11FBK:4; |
| UINT32 HTMCS12FBK:4; |
| UINT32 HTMCS13FBK:4; |
| UINT32 HTMCS14FBK:4; |
| UINT32 HTMCS15FBK:4; |
| } field; |
| UINT32 word; |
| } HT_FBK_CFG1_STRUC, *PHT_FBK_CFG1_STRUC; |
| |
| #define LG_FBK_CFG0 0x135c |
| typedef union _LG_FBK_CFG0_STRUC { |
| struct { |
| UINT32 OFDMMCS0FBK:4; //initial value is 0 |
| UINT32 OFDMMCS1FBK:4; //initial value is 0 |
| UINT32 OFDMMCS2FBK:4; //initial value is 1 |
| UINT32 OFDMMCS3FBK:4; //initial value is 2 |
| UINT32 OFDMMCS4FBK:4; //initial value is 3 |
| UINT32 OFDMMCS5FBK:4; //initial value is 4 |
| UINT32 OFDMMCS6FBK:4; //initial value is 5 |
| UINT32 OFDMMCS7FBK:4; //initial value is 6 |
| } field; |
| UINT32 word; |
| } LG_FBK_CFG0_STRUC, *PLG_FBK_CFG0_STRUC; |
| |
| #define LG_FBK_CFG1 0x1360 |
| typedef union _LG_FBK_CFG1_STRUC { |
| struct { |
| UINT32 CCKMCS0FBK:4; //initial value is 0 |
| UINT32 CCKMCS1FBK:4; //initial value is 0 |
| UINT32 CCKMCS2FBK:4; //initial value is 1 |
| UINT32 CCKMCS3FBK:4; //initial value is 2 |
| UINT32 rsv:16; |
| } field; |
| UINT32 word; |
| } LG_FBK_CFG1_STRUC, *PLG_FBK_CFG1_STRUC; |
| |
| //======================================================= |
| //================ Protection Paramater================================ |
| //======================================================= |
| #define CCK_PROT_CFG 0x1364 //CCK Protection |
| #define ASIC_SHORTNAV 1 |
| #define ASIC_LONGNAV 2 |
| #define ASIC_RTS 1 |
| #define ASIC_CTS 2 |
| typedef union _PROT_CFG_STRUC { |
| struct { |
| UINT32 ProtectRate:16; //Protection control frame rate for CCK TX(RTS/CTS/CFEnd). |
| UINT32 ProtectCtrl:2; //Protection control frame type for CCK TX. 1:RTS/CTS, 2:CTS-to-self, 0:None, 3:rsv |
| UINT32 ProtectNav:2; //TXOP protection type for CCK TX. 0:None, 1:ShortNAVprotect, 2:LongNAVProtect, 3:rsv |
| UINT32 TxopAllowCck:1; //CCK TXOP allowance.0:disallow. |
| UINT32 TxopAllowOfdm:1; //CCK TXOP allowance.0:disallow. |
| UINT32 TxopAllowMM20:1; //CCK TXOP allowance. 0:disallow. |
| UINT32 TxopAllowMM40:1; //CCK TXOP allowance.0:disallow. |
| UINT32 TxopAllowGF20:1; //CCK TXOP allowance.0:disallow. |
| UINT32 TxopAllowGF40:1; //CCK TXOP allowance.0:disallow. |
| UINT32 RTSThEn:1; //RTS threshold enable on CCK TX |
| UINT32 rsv:5; |
| } field; |
| UINT32 word; |
| } PROT_CFG_STRUC, *PPROT_CFG_STRUC; |
| |
| #define OFDM_PROT_CFG 0x1368 //OFDM Protection |
| #define MM20_PROT_CFG 0x136C //MM20 Protection |
| #define MM40_PROT_CFG 0x1370 //MM40 Protection |
| #define GF20_PROT_CFG 0x1374 //GF20 Protection |
| #define GF40_PROT_CFG 0x1378 //GR40 Protection |
| #define EXP_CTS_TIME 0x137C // |
| #define EXP_ACK_TIME 0x1380 // |
| |
| // |
| // 4.4 MAC RX configuration registers (offset:0x1400) |
| // |
| #define RX_FILTR_CFG 0x1400 //TXRX_CSR0 |
| #define AUTO_RSP_CFG 0x1404 //TXRX_CSR4 |
| // |
| // TXRX_CSR4: Auto-Responder/ |
| // |
| typedef union _AUTO_RSP_CFG_STRUC { |
| struct { |
| UINT32 AutoResponderEnable:1; |
| UINT32 BACAckPolicyEnable:1; // 0:long, 1:short preamble |
| UINT32 CTS40MMode:1; // Response CTS 40MHz duplicate mode |
| UINT32 CTS40MRef:1; // Response CTS 40MHz duplicate mode |
| UINT32 AutoResponderPreamble:1; // 0:long, 1:short preamble |
| UINT32 rsv:1; // Power bit value in conrtrol frame |
| UINT32 DualCTSEn:1; // Power bit value in conrtrol frame |
| UINT32 AckCtsPsmBit:1; // Power bit value in conrtrol frame |
| UINT32 :24; |
| } field; |
| UINT32 word; |
| } AUTO_RSP_CFG_STRUC, *PAUTO_RSP_CFG_STRUC; |
| |
| #define LEGACY_BASIC_RATE 0x1408 // TXRX_CSR5 0x3054 |
| #define HT_BASIC_RATE 0x140c |
| #define HT_CTRL_CFG 0x1410 |
| #define SIFS_COST_CFG 0x1414 |
| #define RX_PARSER_CFG 0x1418 //Set NAV for all received frames |
| |
| // |
| // 4.5 MAC Security configuration (offset:0x1500) |
| // |
| #define TX_SEC_CNT0 0x1500 // |
| #define RX_SEC_CNT0 0x1504 // |
| #define CCMP_FC_MUTE 0x1508 // |
| // |
| // 4.6 HCCA/PSMP (offset:0x1600) |
| // |
| #define TXOP_HLDR_ADDR0 0x1600 |
| #define TXOP_HLDR_ADDR1 0x1604 |
| #define TXOP_HLDR_ET 0x1608 |
| #define QOS_CFPOLL_RA_DW0 0x160c |
| #define QOS_CFPOLL_A1_DW1 0x1610 |
| #define QOS_CFPOLL_QC 0x1614 |
| // |
| // 4.7 MAC Statistis registers (offset:0x1700) |
| // |
| #define RX_STA_CNT0 0x1700 // |
| #define RX_STA_CNT1 0x1704 // |
| #define RX_STA_CNT2 0x1708 // |
| |
| // |
| // RX_STA_CNT0_STRUC: RX PLCP error count & RX CRC error count |
| // |
| typedef union _RX_STA_CNT0_STRUC { |
| struct { |
| USHORT CrcErr; |
| USHORT PhyErr; |
| } field; |
| UINT32 word; |
| } RX_STA_CNT0_STRUC, *PRX_STA_CNT0_STRUC; |
| |
| // |
| // RX_STA_CNT1_STRUC: RX False CCA count & RX LONG frame count |
| // |
| typedef union _RX_STA_CNT1_STRUC { |
| struct { |
| USHORT FalseCca; |
| USHORT PlcpErr; |
| } field; |
| UINT32 word; |
| } RX_STA_CNT1_STRUC, *PRX_STA_CNT1_STRUC; |
| |
| // |
| // RX_STA_CNT2_STRUC: |
| // |
| typedef union _RX_STA_CNT2_STRUC { |
| struct { |
| USHORT RxDupliCount; |
| USHORT RxFifoOverflowCount; |
| } field; |
| UINT32 word; |
| } RX_STA_CNT2_STRUC, *PRX_STA_CNT2_STRUC; |
| |
| #define TX_STA_CNT0 0x170C // |
| // |
| // STA_CSR3: TX Beacon count |
| // |
| typedef union _TX_STA_CNT0_STRUC { |
| struct { |
| USHORT TxFailCount; |
| USHORT TxBeaconCount; |
| } field; |
| UINT32 word; |
| } TX_STA_CNT0_STRUC, *PTX_STA_CNT0_STRUC; |
| |
| #define TX_STA_CNT1 0x1710 // |
| // |
| // TX_STA_CNT1: TX tx count |
| // |
| typedef union _TX_STA_CNT1_STRUC { |
| struct { |
| USHORT TxSuccess; |
| USHORT TxRetransmit; |
| } field; |
| UINT32 word; |
| } TX_STA_CNT1_STRUC, *PTX_STA_CNT1_STRUC; |
| |
| #define TX_STA_CNT2 0x1714 // |
| // |
| // TX_STA_CNT2: TX tx count |
| // |
| typedef union _TX_STA_CNT2_STRUC { |
| struct { |
| USHORT TxZeroLenCount; |
| USHORT TxUnderFlowCount; |
| } field; |
| UINT32 word; |
| } TX_STA_CNT2_STRUC, *PTX_STA_CNT2_STRUC; |
| |
| #define TX_STA_FIFO 0x1718 // |
| // |
| // TX_STA_FIFO_STRUC: TX Result for specific PID status fifo register |
| // |
| typedef union PACKED _TX_STA_FIFO_STRUC { |
| struct { |
| UINT32 bValid:1; // 1:This register contains a valid TX result |
| UINT32 PidType:4; |
| UINT32 TxSuccess:1; // Tx No retry success |
| UINT32 TxAggre:1; // Tx Retry Success |
| UINT32 TxAckRequired:1; // Tx fail |
| UINT32 wcid:8; //wireless client index |
| // UINT32 SuccessRate:16; //include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16. |
| UINT32 SuccessRate:13; //include MCS, mode ,shortGI, BW settingSame format as TXWI Word 0 Bit 31-16. |
| UINT32 TxBF:1; |
| UINT32 Reserve:2; |
| } field; |
| UINT32 word; |
| } TX_STA_FIFO_STRUC, *PTX_STA_FIFO_STRUC; |
| |
| // Debug counter |
| #define TX_AGG_CNT 0x171c |
| typedef union _TX_AGG_CNT_STRUC { |
| struct { |
| USHORT NonAggTxCount; |
| USHORT AggTxCount; |
| } field; |
| UINT32 word; |
| } TX_AGG_CNT_STRUC, *PTX_AGG_CNT_STRUC; |
| |
| // Debug counter |
| #define TX_AGG_CNT0 0x1720 |
| typedef union _TX_AGG_CNT0_STRUC { |
| struct { |
| USHORT AggSize1Count; |
| USHORT AggSize2Count; |
| } field; |
| UINT32 word; |
| } TX_AGG_CNT0_STRUC, *PTX_AGG_CNT0_STRUC; |
| |
| // Debug counter |
| #define TX_AGG_CNT1 0x1724 |
| typedef union _TX_AGG_CNT1_STRUC { |
| struct { |
| USHORT AggSize3Count; |
| USHORT AggSize4Count; |
| } field; |
| UINT32 word; |
| } TX_AGG_CNT1_STRUC, *PTX_AGG_CNT1_STRUC; |
| |
| #define TX_AGG_CNT2 0x1728 |
| typedef union _TX_AGG_CNT2_STRUC { |
| struct { |
| USHORT AggSize5Count; |
| USHORT AggSize6Count; |
| } field; |
| UINT32 word; |
| } TX_AGG_CNT2_STRUC, *PTX_AGG_CNT2_STRUC; |
| |
| // Debug counter |
| #define TX_AGG_CNT3 0x172c |
| typedef union _TX_AGG_CNT3_STRUC { |
| struct { |
| USHORT AggSize7Count; |
| USHORT AggSize8Count; |
| } field; |
| UINT32 word; |
| } TX_AGG_CNT3_STRUC, *PTX_AGG_CNT3_STRUC; |
| |
| // Debug counter |
| #define TX_AGG_CNT4 0x1730 |
| typedef union _TX_AGG_CNT4_STRUC { |
| struct { |
| USHORT AggSize9Count; |
| USHORT AggSize10Count; |
| } field; |
| UINT32 word; |
| } TX_AGG_CNT4_STRUC, *PTX_AGG_CNT4_STRUC; |
| |
| #define TX_AGG_CNT5 0x1734 |
| typedef union _TX_AGG_CNT5_STRUC { |
| struct { |
| USHORT AggSize11Count; |
| USHORT AggSize12Count; |
| } field; |
| UINT32 word; |
| } TX_AGG_CNT5_STRUC, *PTX_AGG_CNT5_STRUC; |
| |
| #define TX_AGG_CNT6 0x1738 |
| typedef union _TX_AGG_CNT6_STRUC { |
| struct { |
| USHORT AggSize13Count; |
| USHORT AggSize14Count; |
| } field; |
| UINT32 word; |
| } TX_AGG_CNT6_STRUC, *PTX_AGG_CNT6_STRUC; |
| |
| #define TX_AGG_CNT7 0x173c |
| typedef union _TX_AGG_CNT7_STRUC { |
| struct { |
| USHORT AggSize15Count; |
| USHORT AggSize16Count; |
| } field; |
| UINT32 word; |
| } TX_AGG_CNT7_STRUC, *PTX_AGG_CNT7_STRUC; |
| |
| #define MPDU_DENSITY_CNT 0x1740 |
| typedef union _MPDU_DEN_CNT_STRUC { |
| struct { |
| USHORT TXZeroDelCount; //TX zero length delimiter count |
| USHORT RXZeroDelCount; //RX zero length delimiter count |
| } field; |
| UINT32 word; |
| } MPDU_DEN_CNT_STRUC, *PMPDU_DEN_CNT_STRUC; |
| |
| // |
| // TXRX control registers - base address 0x3000 |
| // |
| // rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. |
| #define TXRX_CSR1 0x77d0 |
| |
| // |
| // Security key table memory, base address = 0x1000 |
| // |
| #define MAC_WCID_BASE 0x1800 //8-bytes(use only 6-bytes) * 256 entry = |
| #define HW_WCID_ENTRY_SIZE 8 |
| #define PAIRWISE_KEY_TABLE_BASE 0x4000 // 32-byte * 256-entry = -byte |
| #define HW_KEY_ENTRY_SIZE 0x20 |
| #define PAIRWISE_IVEIV_TABLE_BASE 0x6000 // 8-byte * 256-entry = -byte |
| #define MAC_IVEIV_TABLE_BASE 0x6000 // 8-byte * 256-entry = -byte |
| #define HW_IVEIV_ENTRY_SIZE 8 |
| #define MAC_WCID_ATTRIBUTE_BASE 0x6800 // 4-byte * 256-entry = -byte |
| #define HW_WCID_ATTRI_SIZE 4 |
| #define WCID_RESERVED 0x6bfc |
| #define SHARED_KEY_TABLE_BASE 0x6c00 // 32-byte * 16-entry = 512-byte |
| #define SHARED_KEY_MODE_BASE 0x7000 // 32-byte * 16-entry = 512-byte |
| #define HW_SHARED_KEY_MODE_SIZE 4 |
| #define SHAREDKEYTABLE 0 |
| #define PAIRWISEKEYTABLE 1 |
| |
| typedef union _SHAREDKEY_MODE_STRUC { |
| struct { |
| UINT32 Bss0Key0CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss0Key1CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss0Key2CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss0Key3CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss1Key0CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss1Key1CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss1Key2CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss1Key3CipherAlg:3; |
| UINT32 :1; |
| } field; |
| UINT32 word; |
| } SHAREDKEY_MODE_STRUC, *PSHAREDKEY_MODE_STRUC; |
| |
| // 64-entry for pairwise key table |
| typedef struct _HW_WCID_ENTRY { // 8-byte per entry |
| UCHAR Address[6]; |
| UCHAR Rsv[2]; |
| } HW_WCID_ENTRY, PHW_WCID_ENTRY; |
| |
| |
| |
| // |
| // Other on-chip shared memory space, base = 0x2000 |
| // |
| |
| // CIS space - base address = 0x2000 |
| #define HW_CIS_BASE 0x2000 |
| |
| // Carrier-sense CTS frame base address. It's where mac stores carrier-sense frame for carrier-sense function. |
| #define HW_CS_CTS_BASE 0x7700 |
| // DFS CTS frame base address. It's where mac stores CTS frame for DFS. |
| #define HW_DFS_CTS_BASE 0x7780 |
| #define HW_CTS_FRAME_SIZE 0x80 |
| |
| // 2004-11-08 john - since NULL frame won't be that long (256 byte). We steal 16 tail bytes |
| // to save debugging settings |
| #define HW_DEBUG_SETTING_BASE 0x77f0 // 0x77f0~0x77ff total 16 bytes |
| #define HW_DEBUG_SETTING_BASE2 0x7770 // 0x77f0~0x77ff total 16 bytes |
| |
| // In order to support maximum 8 MBSS and its maximum length is 512 for each beacon |
| // Three section discontinue memory segments will be used. |
| // 1. The original region for BCN 0~3 |
| // 2. Extract memory from FCE table for BCN 4~5 |
| // 3. Extract memory from Pair-wise key table for BCN 6~7 |
| // It occupied those memory of wcid 238~253 for BCN 6 |
| // and wcid 222~237 for BCN 7 |
| #define HW_BEACON_MAX_SIZE 0x1000 /* unit: byte */ |
| #define HW_BEACON_BASE0 0x7800 |
| #define HW_BEACON_BASE1 0x7A00 |
| #define HW_BEACON_BASE2 0x7C00 |
| #define HW_BEACON_BASE3 0x7E00 |
| #define HW_BEACON_BASE4 0x7200 |
| #define HW_BEACON_BASE5 0x7400 |
| #define HW_BEACON_BASE6 0x5DC0 |
| #define HW_BEACON_BASE7 0x5BC0 |
| |
| #define HW_BEACON_MAX_COUNT 8 |
| #define HW_BEACON_OFFSET 0x0200 |
| #define HW_BEACON_CONTENT_LEN (HW_BEACON_OFFSET - TXWI_SIZE) |
| |
| // HOST-MCU shared memory - base address = 0x2100 |
| #define HOST_CMD_CSR 0x404 |
| #define H2M_MAILBOX_CSR 0x7010 |
| #define H2M_MAILBOX_CID 0x7014 |
| #define H2M_MAILBOX_STATUS 0x701c |
| #define H2M_INT_SRC 0x7024 |
| #define H2M_BBP_AGENT 0x7028 |
| #define M2H_CMD_DONE_CSR 0x000c |
| #define MCU_TXOP_ARRAY_BASE 0x000c // TODO: to be provided by Albert |
| #define MCU_TXOP_ENTRY_SIZE 32 // TODO: to be provided by Albert |
| #define MAX_NUM_OF_TXOP_ENTRY 16 // TODO: must be same with 8051 firmware |
| #define MCU_MBOX_VERSION 0x01 // TODO: to be confirmed by Albert |
| #define MCU_MBOX_VERSION_OFFSET 5 // TODO: to be provided by Albert |
| |
| // |
| // Host DMA registers - base address 0x200 . TX0-3=EDCAQid0-3, TX4=HCCA, TX5=MGMT, |
| // |
| // |
| // DMA RING DESCRIPTOR |
| // |
| #define E2PROM_CSR 0x0004 |
| #define IO_CNTL_CSR 0x77d0 |
| |
| #ifdef RT2870 |
| // 8051 firmware image for usb - use last-half base address = 0x3000 |
| #define FIRMWARE_IMAGE_BASE 0x3000 |
| #define MAX_FIRMWARE_IMAGE_SIZE 0x1000 // 4kbyte |
| #endif // RT2870 // |
| |
| // ================================================================ |
| // Tx / Rx / Mgmt ring descriptor definition |
| // ================================================================ |
| |
| // the following PID values are used to mark outgoing frame type in TXD->PID so that |
| // proper TX statistics can be collected based on these categories |
| // b3-2 of PID field - |
| #define PID_MGMT 0x05 |
| #define PID_BEACON 0x0c |
| #define PID_DATA_NORMALUCAST 0x02 |
| #define PID_DATA_AMPDU 0x04 |
| #define PID_DATA_NO_ACK 0x08 |
| #define PID_DATA_NOT_NORM_ACK 0x03 |
| |
| // value domain of pTxD->HostQId (4-bit: 0~15) |
| #define QID_AC_BK 1 // meet ACI definition in 802.11e |
| #define QID_AC_BE 0 // meet ACI definition in 802.11e |
| #define QID_AC_VI 2 |
| #define QID_AC_VO 3 |
| #define QID_HCCA 4 |
| #define NUM_OF_TX_RING 5 |
| #define QID_MGMT 13 |
| #define QID_RX 14 |
| #define QID_OTHER 15 |
| |
| |
| // ------------------------------------------------------ |
| // BBP & RF definition |
| // ------------------------------------------------------ |
| #define BUSY 1 |
| #define IDLE 0 |
| |
| #define RF_R00 0 |
| #define RF_R01 1 |
| #define RF_R02 2 |
| #define RF_R03 3 |
| #define RF_R04 4 |
| #define RF_R05 5 |
| #define RF_R06 6 |
| #define RF_R07 7 |
| #define RF_R08 8 |
| #define RF_R09 9 |
| #define RF_R10 10 |
| #define RF_R11 11 |
| #define RF_R12 12 |
| #define RF_R13 13 |
| #define RF_R14 14 |
| #define RF_R15 15 |
| #define RF_R16 16 |
| #define RF_R17 17 |
| #define RF_R18 18 |
| #define RF_R19 19 |
| #define RF_R20 20 |
| #define RF_R21 21 |
| #define RF_R22 22 |
| #define RF_R23 23 |
| #define RF_R24 24 |
| #define RF_R25 25 |
| #define RF_R26 26 |
| #define RF_R27 27 |
| #define RF_R28 28 |
| #define RF_R29 29 |
| #define RF_R30 30 |
| #define RF_R31 31 |
| |
| #define BBP_R0 0 // version |
| #define BBP_R1 1 // TSSI |
| #define BBP_R2 2 // TX configure |
| #define BBP_R3 3 |
| #define BBP_R4 4 |
| #define BBP_R5 5 |
| #define BBP_R6 6 |
| #define BBP_R14 14 // RX configure |
| #define BBP_R16 16 |
| #define BBP_R17 17 // RX sensibility |
| #define BBP_R18 18 |
| #define BBP_R21 21 |
| #define BBP_R22 22 |
| #define BBP_R24 24 |
| #define BBP_R25 25 |
| #ifdef RT30xx |
| #define BBP_R31 31 |
| #endif |
| #define BBP_R49 49 //TSSI |
| #define BBP_R50 50 |
| #define BBP_R51 51 |
| #define BBP_R52 52 |
| #define BBP_R55 55 |
| #define BBP_R62 62 // Rx SQ0 Threshold HIGH |
| #define BBP_R63 63 |
| #define BBP_R64 64 |
| #define BBP_R65 65 |
| #define BBP_R66 66 |
| #define BBP_R67 67 |
| #define BBP_R68 68 |
| #define BBP_R69 69 |
| #define BBP_R70 70 // Rx AGC SQ CCK Xcorr threshold |
| #define BBP_R73 73 |
| #define BBP_R75 75 |
| #define BBP_R77 77 |
| #ifdef RT30xx |
| #define BBP_R79 79 |
| #define BBP_R80 80 |
| #endif |
| #define BBP_R81 81 |
| #define BBP_R82 82 |
| #define BBP_R83 83 |
| #define BBP_R84 84 |
| #define BBP_R86 86 |
| #define BBP_R91 91 |
| #define BBP_R92 92 |
| #define BBP_R94 94 // Tx Gain Control |
| #define BBP_R103 103 |
| #define BBP_R105 105 |
| #define BBP_R113 113 |
| #define BBP_R114 114 |
| #define BBP_R115 115 |
| #define BBP_R116 116 |
| #define BBP_R117 117 |
| #define BBP_R118 118 |
| #define BBP_R119 119 |
| #define BBP_R120 120 |
| #define BBP_R121 121 |
| #define BBP_R122 122 |
| #define BBP_R123 123 |
| #ifdef RT30xx |
| #define BBP_R138 138 // add by johnli, RF power sequence setup, ADC dynamic on/off control |
| #endif // RT30xx // |
| |
| |
| #define BBPR94_DEFAULT 0x06 // Add 1 value will gain 1db |
| |
| #define RSSI_FOR_VERY_LOW_SENSIBILITY -35 |
| #define RSSI_FOR_LOW_SENSIBILITY -58 |
| #define RSSI_FOR_MID_LOW_SENSIBILITY -80 |
| #define RSSI_FOR_MID_SENSIBILITY -90 |
| |
| //------------------------------------------------------------------------- |
| // EEPROM definition |
| //------------------------------------------------------------------------- |
| #define EEDO 0x08 |
| #define EEDI 0x04 |
| #define EECS 0x02 |
| #define EESK 0x01 |
| #define EERL 0x80 |
| |
| #define EEPROM_WRITE_OPCODE 0x05 |
| #define EEPROM_READ_OPCODE 0x06 |
| #define EEPROM_EWDS_OPCODE 0x10 |
| #define EEPROM_EWEN_OPCODE 0x13 |
| |
| #define NUM_EEPROM_BBP_PARMS 19 // Include NIC Config 0, 1, CR, TX ALC step, BBPs |
| #define NUM_EEPROM_TX_G_PARMS 7 |
| #define EEPROM_NIC1_OFFSET 0x34 // The address is from NIC config 0, not BBP register ID |
| #define EEPROM_NIC2_OFFSET 0x36 // The address is from NIC config 0, not BBP register ID |
| #define EEPROM_BBP_BASE_OFFSET 0xf0 // The address is from NIC config 0, not BBP register ID |
| #define EEPROM_G_TX_PWR_OFFSET 0x52 |
| #define EEPROM_G_TX2_PWR_OFFSET 0x60 |
| #define EEPROM_LED1_OFFSET 0x3c |
| #define EEPROM_LED2_OFFSET 0x3e |
| #define EEPROM_LED3_OFFSET 0x40 |
| #define EEPROM_LNA_OFFSET 0x44 |
| #define EEPROM_RSSI_BG_OFFSET 0x46 |
| #define EEPROM_RSSI_A_OFFSET 0x4a |
| #define EEPROM_DEFINE_MAX_TXPWR 0x4e |
| #define EEPROM_TXPOWER_BYRATE_20MHZ_2_4G 0xde // 20MHZ 2.4G tx power. |
| #define EEPROM_TXPOWER_BYRATE_40MHZ_2_4G 0xee // 40MHZ 2.4G tx power. |
| #define EEPROM_TXPOWER_BYRATE_20MHZ_5G 0xfa // 20MHZ 5G tx power. |
| #define EEPROM_TXPOWER_BYRATE_40MHZ_5G 0x10a // 40MHZ 5G tx power. |
| #define EEPROM_A_TX_PWR_OFFSET 0x78 |
| #define EEPROM_A_TX2_PWR_OFFSET 0xa6 |
| #define EEPROM_VERSION_OFFSET 0x02 |
| #define EEPROM_FREQ_OFFSET 0x3a |
| #define EEPROM_TXPOWER_BYRATE 0xde // 20MHZ power. |
| #define EEPROM_TXPOWER_DELTA 0x50 // 20MHZ AND 40 MHZ use different power. This is delta in 40MHZ. |
| #define VALID_EEPROM_VERSION 1 |
| |
| // PairKeyMode definition |
| #define PKMODE_NONE 0 |
| #define PKMODE_WEP64 1 |
| #define PKMODE_WEP128 2 |
| #define PKMODE_TKIP 3 |
| #define PKMODE_AES 4 |
| #define PKMODE_CKIP64 5 |
| #define PKMODE_CKIP128 6 |
| #define PKMODE_TKIP_NO_MIC 7 // MIC appended by driver: not a valid value in hardware key table |
| |
| // ================================================================================= |
| // WCID format |
| // ================================================================================= |
| //7.1 WCID ENTRY format : 8bytes |
| typedef struct _WCID_ENTRY_STRUC { |
| UCHAR RXBABitmap7; // bit0 for TID8, bit7 for TID 15 |
| UCHAR RXBABitmap0; // bit0 for TID0, bit7 for TID 7 |
| UCHAR MAC[6]; // 0 for shared key table. 1 for pairwise key table |
| } WCID_ENTRY_STRUC, *PWCID_ENTRY_STRUC; |
| |
| //8.1.1 SECURITY KEY format : 8DW |
| // 32-byte per entry, total 16-entry for shared key table, 64-entry for pairwise key table |
| typedef struct _HW_KEY_ENTRY { // 32-byte per entry |
| UCHAR Key[16]; |
| UCHAR TxMic[8]; |
| UCHAR RxMic[8]; |
| } HW_KEY_ENTRY, *PHW_KEY_ENTRY; |
| |
| //8.1.2 IV/EIV format : 2DW |
| |
| //8.1.3 RX attribute entry format : 1DW |
| typedef struct _MAC_ATTRIBUTE_STRUC { |
| UINT32 KeyTab:1; // 0 for shared key table. 1 for pairwise key table |
| UINT32 PairKeyMode:3; |
| UINT32 BSSIDIdx:3; //multipleBSS index for the WCID |
| UINT32 RXWIUDF:3; |
| UINT32 rsv:22; |
| } MAC_ATTRIBUTE_STRUC, *PMAC_ATTRIBUTE_STRUC; |
| |
| // ================================================================================= |
| // TX / RX ring descriptor format |
| // ================================================================================= |
| |
| // the first 24-byte in TXD is called TXINFO and will be DMAed to MAC block through TXFIFO. |
| // MAC block use this TXINFO to control the transmission behavior of this frame. |
| #define FIFO_MGMT 0 |
| #define FIFO_HCCA 1 |
| #define FIFO_EDCA 2 |
| |
| // |
| // TX descriptor format, Tx ring, Mgmt Ring |
| // |
| typedef struct PACKED _TXD_STRUC { |
| // Word 0 |
| UINT32 SDPtr0; |
| // Word 1 |
| UINT32 SDLen1:14; |
| UINT32 LastSec1:1; |
| UINT32 Burst:1; |
| UINT32 SDLen0:14; |
| UINT32 LastSec0:1; |
| UINT32 DMADONE:1; |
| //Word2 |
| UINT32 SDPtr1; |
| //Word3 |
| UINT32 rsv2:24; |
| UINT32 WIV:1; // Wireless Info Valid. 1 if Driver already fill WI, o if DMA needs to copy WI to correctposition |
| UINT32 QSEL:2; // select on-chip FIFO ID for 2nd-stage output scheduler.0:MGMT, 1:HCCA 2:EDCA |
| UINT32 rsv:2; |
| UINT32 TCO:1; // |
| UINT32 UCO:1; // |
| UINT32 ICO:1; // |
| } TXD_STRUC, *PTXD_STRUC; |
| |
| // |
| // TXD Wireless Information format for Tx ring and Mgmt Ring |
| // |
| //txop : for txop mode |
| // 0:txop for the MPDU frame will be handles by ASIC by register |
| // 1/2/3:the MPDU frame is send after PIFS/backoff/SIFS |
| typedef struct PACKED _TXWI_STRUC { |
| // Word 0 |
| UINT32 FRAG:1; // 1 to inform TKIP engine this is a fragment. |
| UINT32 MIMOps:1; // the remote peer is in dynamic MIMO-PS mode |
| UINT32 CFACK:1; |
| UINT32 TS:1; |
| |
| UINT32 AMPDU:1; |
| UINT32 MpduDensity:3; |
| UINT32 txop:2; //FOR "THIS" frame. 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs only when previous frame exchange is successful. |
| UINT32 rsv:6; |
| |
| UINT32 MCS:7; |
| UINT32 BW:1; //channel bandwidth 20MHz or 40 MHz |
| UINT32 ShortGI:1; |
| UINT32 STBC:2; // 1: STBC support MCS =0-7, 2,3 : RESERVE |
| UINT32 Ifs:1; // |
| UINT32 rsv2:1; |
| UINT32 TxBF:1; // 3*3 |
| UINT32 PHYMODE:2; |
| // Word 1 |
| UINT32 ACK:1; |
| UINT32 NSEQ:1; |
| UINT32 BAWinSize:6; |
| UINT32 WirelessCliID:8; |
| UINT32 MPDUtotalByteCount:12; |
| UINT32 PacketId:4; |
| //Word2 |
| UINT32 IV; |
| //Word3 |
| UINT32 EIV; |
| } TXWI_STRUC, *PTXWI_STRUC; |
| |
| // |
| // Rx descriptor format, Rx Ring |
| // |
| // |
| // RXWI wireless information format, in PBF. invisible in driver. |
| // |
| typedef struct PACKED _RXWI_STRUC { |
| // Word 0 |
| UINT32 WirelessCliID:8; |
| UINT32 KeyIndex:2; |
| UINT32 BSSID:3; |
| UINT32 UDF:3; |
| UINT32 MPDUtotalByteCount:12; |
| UINT32 TID:4; |
| // Word 1 |
| UINT32 FRAG:4; |
| UINT32 SEQUENCE:12; |
| UINT32 MCS:7; |
| UINT32 BW:1; |
| UINT32 ShortGI:1; |
| UINT32 STBC:2; |
| UINT32 rsv:3; |
| UINT32 PHYMODE:2; // 1: this RX frame is unicast to me |
| //Word2 |
| UINT32 RSSI0:8; |
| UINT32 RSSI1:8; |
| UINT32 RSSI2:8; |
| UINT32 rsv1:8; |
| //Word3 |
| UINT32 SNR0:8; |
| UINT32 SNR1:8; |
| UINT32 rsv2:16; |
| } RXWI_STRUC, *PRXWI_STRUC; |
| |
| // ================================================================================= |
| // HOST-MCU communication data structure |
| // ================================================================================= |
| |
| // |
| // H2M_MAILBOX_CSR: Host-to-MCU Mailbox |
| // |
| typedef union _H2M_MAILBOX_STRUC { |
| struct { |
| UINT32 LowByte:8; |
| UINT32 HighByte:8; |
| UINT32 CmdToken:8; |
| UINT32 Owner:8; |
| } field; |
| UINT32 word; |
| } H2M_MAILBOX_STRUC, *PH2M_MAILBOX_STRUC; |
| |
| // |
| // M2H_CMD_DONE_CSR: MCU-to-Host command complete indication |
| // |
| typedef union _M2H_CMD_DONE_STRUC { |
| struct { |
| UINT32 CmdToken0; |
| UINT32 CmdToken1; |
| UINT32 CmdToken2; |
| UINT32 CmdToken3; |
| } field; |
| UINT32 word; |
| } M2H_CMD_DONE_STRUC, *PM2H_CMD_DONE_STRUC; |
| |
| // |
| // MCU_LEDCS: MCU LED Control Setting. |
| // |
| typedef union _MCU_LEDCS_STRUC { |
| struct { |
| UCHAR LedMode:7; |
| UCHAR Polarity:1; |
| } field; |
| UCHAR word; |
| } MCU_LEDCS_STRUC, *PMCU_LEDCS_STRUC; |
| |
| // ================================================================================= |
| // Register format |
| // ================================================================================= |
| |
| |
| |
| //NAV_TIME_CFG :NAV |
| typedef union _NAV_TIME_CFG_STRUC { |
| struct { |
| UCHAR Sifs; // in unit of 1-us |
| UCHAR SlotTime; // in unit of 1-us |
| USHORT Eifs:9; // in unit of 1-us |
| USHORT ZeroSifs:1; // Applied zero SIFS timer after OFDM RX 0: disable |
| USHORT rsv:6; |
| } field; |
| UINT32 word; |
| } NAV_TIME_CFG_STRUC, *PNAV_TIME_CFG_STRUC; |
| |
| // |
| // RX_FILTR_CFG: /RX configuration register |
| // |
| typedef union _RX_FILTR_CFG_STRUC { |
| struct { |
| UINT32 DropCRCErr:1; // Drop CRC error |
| UINT32 DropPhyErr:1; // Drop physical error |
| UINT32 DropNotToMe:1; // Drop not to me unicast frame |
| UINT32 DropNotMyBSSID:1; // Drop fram ToDs bit is true |
| |
| UINT32 DropVerErr:1; // Drop version error frame |
| UINT32 DropMcast:1; // Drop multicast frames |
| UINT32 DropBcast:1; // Drop broadcast frames |
| UINT32 DropDuplicate:1; // Drop duplicate frame |
| |
| UINT32 DropCFEndAck:1; // Drop Ps-Poll |
| UINT32 DropCFEnd:1; // Drop Ps-Poll |
| UINT32 DropAck:1; // Drop Ps-Poll |
| UINT32 DropCts:1; // Drop Ps-Poll |
| |
| UINT32 DropRts:1; // Drop Ps-Poll |
| UINT32 DropPsPoll:1; // Drop Ps-Poll |
| UINT32 DropBA:1; // |
| UINT32 DropBAR:1; // |
| |
| UINT32 DropRsvCntlType:1; |
| UINT32 :15; |
| } field; |
| UINT32 word; |
| } RX_FILTR_CFG_STRUC, *PRX_FILTR_CFG_STRUC; |
| |
| // |
| // PHY_CSR4: RF serial control register |
| // |
| typedef union _PHY_CSR4_STRUC { |
| struct { |
| UINT32 RFRegValue:24; // Register value (include register id) serial out to RF/IF chip. |
| UINT32 NumberOfBits:5; // Number of bits used in RFRegValue (I:20, RFMD:22) |
| UINT32 IFSelect:1; // 1: select IF to program, 0: select RF to program |
| UINT32 PLL_LD:1; // RF PLL_LD status |
| UINT32 Busy:1; // 1: ASIC is busy execute RF programming. |
| } field; |
| UINT32 word; |
| } PHY_CSR4_STRUC, *PPHY_CSR4_STRUC; |
| |
| // |
| // SEC_CSR5: shared key table security mode register |
| // |
| typedef union _SEC_CSR5_STRUC { |
| struct { |
| UINT32 Bss2Key0CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss2Key1CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss2Key2CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss2Key3CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss3Key0CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss3Key1CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss3Key2CipherAlg:3; |
| UINT32 :1; |
| UINT32 Bss3Key3CipherAlg:3; |
| UINT32 :1; |
| } field; |
| UINT32 word; |
| } SEC_CSR5_STRUC, *PSEC_CSR5_STRUC; |
| |
| // |
| // HOST_CMD_CSR: For HOST to interrupt embedded processor |
| // |
| typedef union _HOST_CMD_CSR_STRUC { |
| struct { |
| UINT32 HostCommand:8; |
| UINT32 Rsv:24; |
| } field; |
| UINT32 word; |
| } HOST_CMD_CSR_STRUC, *PHOST_CMD_CSR_STRUC; |
| |
| // |
| // AIFSN_CSR: AIFSN for each EDCA AC |
| // |
| |
| |
| |
| // |
| // E2PROM_CSR: EEPROM control register |
| // |
| typedef union _E2PROM_CSR_STRUC { |
| struct { |
| UINT32 Reload:1; // Reload EEPROM content, write one to reload, self-cleared. |
| UINT32 EepromSK:1; |
| UINT32 EepromCS:1; |
| UINT32 EepromDI:1; |
| UINT32 EepromDO:1; |
| UINT32 Type:1; // 1: 93C46, 0:93C66 |
| UINT32 LoadStatus:1; // 1:loading, 0:done |
| UINT32 Rsvd:25; |
| } field; |
| UINT32 word; |
| } E2PROM_CSR_STRUC, *PE2PROM_CSR_STRUC; |
| |
| // ------------------------------------------------------------------- |
| // E2PROM data layout |
| // ------------------------------------------------------------------- |
| |
| // |
| // EEPROM antenna select format |
| // |
| typedef union _EEPROM_ANTENNA_STRUC { |
| struct { |
| USHORT RxPath:4; // 1: 1R, 2: 2R, 3: 3R |
| USHORT TxPath:4; // 1: 1T, 2: 2T |
| USHORT RfIcType:4; // see E2PROM document |
| USHORT Rsv:4; |
| } field; |
| USHORT word; |
| } EEPROM_ANTENNA_STRUC, *PEEPROM_ANTENNA_STRUC; |
| |
| typedef union _EEPROM_NIC_CINFIG2_STRUC { |
| struct { |
| USHORT HardwareRadioControl:1; // 1:enable, 0:disable |
| USHORT DynamicTxAgcControl:1; // |
| USHORT ExternalLNAForG:1; // |
| USHORT ExternalLNAForA:1; // external LNA enable for 2.4G |
| USHORT CardbusAcceleration:1; // !!! NOTE: 0 - enable, 1 - disable |
| USHORT BW40MSidebandForG:1; |
| USHORT BW40MSidebandForA:1; |
| USHORT EnableWPSPBC:1; // WPS PBC Control bit |
| USHORT BW40MAvailForG:1; // 0:enable, 1:disable |
| USHORT BW40MAvailForA:1; // 0:enable, 1:disable |
| #ifndef RT30xx |
| USHORT Rsv2:6; // must be 0 |
| #endif |
| #ifdef RT30xx |
| USHORT Rsv1:1; // must be 0 |
| USHORT AntDiversity:1; // Antenna diversity |
| USHORT Rsv2:3; // must be 0 |
| USHORT DACTestBit:1; // control if driver should patch the DAC issue |
| #endif |
| } field; |
| USHORT word; |
| } EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC; |
| |
| // |
| // TX_PWR Value valid range 0xFA(-6) ~ 0x24(36) |
| // |
| typedef union _EEPROM_TX_PWR_STRUC { |
| struct { |
| CHAR Byte0; // Low Byte |
| CHAR Byte1; // High Byte |
| } field; |
| USHORT word; |
| } EEPROM_TX_PWR_STRUC, *PEEPROM_TX_PWR_STRUC; |
| |
| typedef union _EEPROM_VERSION_STRUC { |
| struct { |
| UCHAR FaeReleaseNumber; // Low Byte |
| UCHAR Version; // High Byte |
| } field; |
| USHORT word; |
| } EEPROM_VERSION_STRUC, *PEEPROM_VERSION_STRUC; |
| |
| typedef union _EEPROM_LED_STRUC { |
| struct { |
| USHORT PolarityRDY_G:1; // Polarity RDY_G setting. |
| USHORT PolarityRDY_A:1; // Polarity RDY_A setting. |
| USHORT PolarityACT:1; // Polarity ACT setting. |
| USHORT PolarityGPIO_0:1; // Polarity GPIO#0 setting. |
| USHORT PolarityGPIO_1:1; // Polarity GPIO#1 setting. |
| USHORT PolarityGPIO_2:1; // Polarity GPIO#2 setting. |
| USHORT PolarityGPIO_3:1; // Polarity GPIO#3 setting. |
| USHORT PolarityGPIO_4:1; // Polarity GPIO#4 setting. |
| USHORT LedMode:5; // Led mode. |
| USHORT Rsvd:3; // Reserved |
| } field; |
| USHORT word; |
| } EEPROM_LED_STRUC, *PEEPROM_LED_STRUC; |
| |
| typedef union _EEPROM_TXPOWER_DELTA_STRUC { |
| struct { |
| UCHAR DeltaValue:6; // Tx Power dalta value (MAX=4) |
| UCHAR Type:1; // 1: plus the delta value, 0: minus the delta value |
| UCHAR TxPowerEnable:1;// Enable |
| } field; |
| UCHAR value; |
| } EEPROM_TXPOWER_DELTA_STRUC, *PEEPROM_TXPOWER_DELTA_STRUC; |
| |
| // |
| // QOS_CSR0: TXOP holder address0 register |
| // |
| typedef union _QOS_CSR0_STRUC { |
| struct { |
| UCHAR Byte0; // MAC address byte 0 |
| UCHAR Byte1; // MAC address byte 1 |
| UCHAR Byte2; // MAC address byte 2 |
| UCHAR Byte3; // MAC address byte 3 |
| } field; |
| UINT32 word; |
| } QOS_CSR0_STRUC, *PQOS_CSR0_STRUC; |
| |
| // |
| // QOS_CSR1: TXOP holder address1 register |
| // |
| typedef union _QOS_CSR1_STRUC { |
| struct { |
| UCHAR Byte4; // MAC address byte 4 |
| UCHAR Byte5; // MAC address byte 5 |
| UCHAR Rsvd0; |
| UCHAR Rsvd1; |
| } field; |
| UINT32 word; |
| } QOS_CSR1_STRUC, *PQOS_CSR1_STRUC; |
| |
| #define RF_CSR_CFG 0x500 |
| typedef union _RF_CSR_CFG_STRUC { |
| struct { |
| UINT RF_CSR_DATA:8; // DATA |
| UINT TESTCSR_RFACC_REGNUM:5; // RF register ID |
| UINT Rsvd2:3; // Reserved |
| UINT RF_CSR_WR:1; // 0: read 1: write |
| UINT RF_CSR_KICK:1; // kick RF register read/write |
| UINT Rsvd1:14; // Reserved |
| } field; |
| UINT word; |
| } RF_CSR_CFG_STRUC, *PRF_CSR_CFG_STRUC; |
| |
| #endif // __RT28XX_H__ |