USB: EHCI: rescan the queue after an unlink
This patch (as1280) fixes an obscure bug in ehci-hcd's dequeuing logic
for async URBs. If a later URB is unlinked and the completion
routine unlinks an earlier URB, then the earlier URB won't be given
back in a timely manner because the endpoint queue isn't rescanned as
it should be.
Similar bugs occur if an endpoint is reset or a halt is cleared while
a completion routine is running, because the subroutines don't test
for the COMPLETING state.
All these problems are solved by adding a new needs_rescan flag to the
ehci_qh structure. If the flag is set while scanning through an idle
QH, the scan will be repeated. If the QH isn't idle then an unlink
cycle will be initiated, and the proper action will be taken when it
becomes idle.
Also, an unnecessary test is removed from qh_link_async(): That
routine is never called if the QH's state isn't IDLE.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 377ed53..57a8479 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -310,13 +310,13 @@
static unsigned
qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
{
- struct ehci_qtd *last = NULL, *end = qh->dummy;
+ struct ehci_qtd *last, *end = qh->dummy;
struct list_head *entry, *tmp;
- int last_status = -EINPROGRESS;
+ int last_status;
int stopped;
unsigned count = 0;
u8 state;
- __le32 halt = HALT_BIT(ehci);
+ const __le32 halt = HALT_BIT(ehci);
struct ehci_qh_hw *hw = qh->hw;
if (unlikely (list_empty (&qh->qtd_list)))
@@ -327,11 +327,20 @@
* they add urbs to this qh's queue or mark them for unlinking.
*
* NOTE: unlinking expects to be done in queue order.
+ *
+ * It's a bug for qh->qh_state to be anything other than
+ * QH_STATE_IDLE, unless our caller is scan_async() or
+ * scan_periodic().
*/
state = qh->qh_state;
qh->qh_state = QH_STATE_COMPLETING;
stopped = (state == QH_STATE_IDLE);
+ rescan:
+ last = NULL;
+ last_status = -EINPROGRESS;
+ qh->needs_rescan = 0;
+
/* remove de-activated QTDs from front of queue.
* after faults (including short reads), cleanup this urb
* then let the queue advance.
@@ -507,6 +516,21 @@
ehci_qtd_free (ehci, last);
}
+ /* Do we need to rescan for URBs dequeued during a giveback? */
+ if (unlikely(qh->needs_rescan)) {
+ /* If the QH is already unlinked, do the rescan now. */
+ if (state == QH_STATE_IDLE)
+ goto rescan;
+
+ /* Otherwise we have to wait until the QH is fully unlinked.
+ * Our caller will start an unlink if qh->needs_rescan is
+ * set. But if an unlink has already started, nothing needs
+ * to be done.
+ */
+ if (state != QH_STATE_LINKED)
+ qh->needs_rescan = 0;
+ }
+
/* restore original state; caller must unlink or relink */
qh->qh_state = state;
@@ -535,8 +559,10 @@
& hw->hw_info2) != 0) {
intr_deschedule (ehci, qh);
(void) qh_schedule (ehci, qh);
- } else
- unlink_async (ehci, qh);
+ } else {
+ /* Tell the caller to start an unlink */
+ qh->needs_rescan = 1;
+ }
break;
/* otherwise, unlink already started */
}
@@ -916,6 +942,8 @@
if (unlikely(qh->clearing_tt))
return;
+ WARN_ON(qh->qh_state != QH_STATE_IDLE);
+
/* (re)start the async schedule? */
head = ehci->async;
timer_action_done (ehci, TIMER_ASYNC_OFF);
@@ -934,8 +962,7 @@
}
/* clear halt and/or toggle; and maybe recover from silicon quirk */
- if (qh->qh_state == QH_STATE_IDLE)
- qh_refresh (ehci, qh);
+ qh_refresh(ehci, qh);
/* splice right after start */
qh->qh_next = head->qh_next;
@@ -1220,6 +1247,8 @@
qh = qh_get (qh);
qh->stamp = ehci->stamp;
temp = qh_completions (ehci, qh);
+ if (qh->needs_rescan)
+ unlink_async(ehci, qh);
qh_put (qh);
if (temp != 0) {
goto rescan;