| /* |
| * Reference Device Tree Source for the Bock-W board |
| * |
| * Copyright (C) 2013 Renesas Solutions Corp. |
| * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| * |
| * based on r8a7779 |
| * |
| * Copyright (C) 2013 Renesas Solutions Corp. |
| * Copyright (C) 2013 Simon Horman |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| /dts-v1/; |
| #include "r8a7778.dtsi" |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "bockw"; |
| compatible = "renesas,bockw", "renesas,r8a7778"; |
| |
| aliases { |
| serial0 = &scif0; |
| }; |
| |
| chosen { |
| bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw"; |
| stdout-path = &scif0; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x60000000 0x10000000>; |
| }; |
| |
| fixedregulator3v3: fixedregulator@0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "fixed-3.3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sound { |
| compatible = "simple-audio-card"; |
| |
| simple-audio-card,format = "left_j"; |
| simple-audio-card,bitclock-master = <&sndcodec>; |
| simple-audio-card,frame-master = <&sndcodec>; |
| |
| sndcpu: simple-audio-card,cpu { |
| sound-dai = <&rcar_sound>; |
| }; |
| |
| sndcodec: simple-audio-card,codec { |
| sound-dai = <&ak4643>; |
| system-clock-frequency = <11289600>; |
| }; |
| }; |
| }; |
| |
| &bsc { |
| ethernet@18300000 { |
| compatible = "smsc,lan9220", "smsc,lan9115"; |
| reg = <0x18300000 0x1000>; |
| |
| phy-mode = "mii"; |
| interrupt-parent = <&irqpin>; |
| interrupts = <0 IRQ_TYPE_EDGE_FALLING>; |
| reg-io-width = <4>; |
| vddvario-supply = <&fixedregulator3v3>; |
| vdd33a-supply = <&fixedregulator3v3>; |
| }; |
| }; |
| |
| &extal_clk { |
| clock-frequency = <33333333>; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| |
| ak4643: codec@12 { |
| compatible = "asahi-kasei,ak4643"; |
| #sound-dai-cells = <0>; |
| reg = <0x12>; |
| }; |
| |
| camera@41 { |
| compatible = "oki,ml86v7667"; |
| reg = <0x41>; |
| }; |
| |
| camera@43 { |
| compatible = "oki,ml86v7667"; |
| reg = <0x43>; |
| }; |
| |
| rx8581: rtc@51 { |
| compatible = "epson,rx8581"; |
| reg = <0x51>; |
| }; |
| }; |
| |
| &mmcif { |
| pinctrl-0 = <&mmc_pins>; |
| pinctrl-names = "default"; |
| |
| vmmc-supply = <&fixedregulator3v3>; |
| bus-width = <8>; |
| broken-cd; |
| status = "okay"; |
| }; |
| |
| &irqpin { |
| status = "okay"; |
| }; |
| |
| &tmu0 { |
| status = "okay"; |
| }; |
| |
| &pfc { |
| scif0_pins: serial0 { |
| renesas,groups = "scif0_data_a", "scif0_ctrl"; |
| renesas,function = "scif0"; |
| }; |
| |
| mmc_pins: mmc { |
| renesas,groups = "mmc_data8", "mmc_ctrl"; |
| renesas,function = "mmc"; |
| }; |
| |
| sdhi0_pins: sd0 { |
| renesas,groups = "sdhi0_data4", "sdhi0_ctrl", |
| "sdhi0_cd"; |
| renesas,function = "sdhi0"; |
| }; |
| |
| hspi0_pins: hspi0 { |
| renesas,groups = "hspi0_a"; |
| renesas,function = "hspi0"; |
| }; |
| |
| usb0_pins: usb0 { |
| renesas,groups = "usb0"; |
| renesas,function = "usb0"; |
| }; |
| |
| usb1_pins: usb1 { |
| renesas,groups = "usb1"; |
| renesas,function = "usb1"; |
| }; |
| |
| vin0_pins: vin0 { |
| renesas,groups = "vin0_data8", "vin0_clk"; |
| renesas,function = "vin0"; |
| }; |
| |
| vin1_pins: vin1 { |
| renesas,groups = "vin1_data8", "vin1_clk"; |
| renesas,function = "vin1"; |
| }; |
| }; |
| |
| &sdhi0 { |
| pinctrl-0 = <&sdhi0_pins>; |
| pinctrl-names = "default"; |
| |
| vmmc-supply = <&fixedregulator3v3>; |
| bus-width = <4>; |
| status = "okay"; |
| wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &hspi0 { |
| pinctrl-0 = <&hspi0_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| flash: flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "spansion,s25fl008k", "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <104000000>; |
| m25p,fast-read; |
| |
| partition@0 { |
| label = "data(spi)"; |
| reg = <0x00000000 0x00100000>; |
| }; |
| }; |
| }; |
| |
| &scif0 { |
| pinctrl-0 = <&scif0_pins>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| }; |