ide: use ATA_* defines instead of *_STAT and *_ERR ones
* ERR_STAT -> ATA_ERR
* INDEX_STAT -> ATA_IDX
* ECC_STAT -> ATA_CORR
* DRQ_STAT -> ATA_DRQ
* SEEK_STAT -> ATA_DSC
* WRERR_STAT -> ATA_DF
* READY_STAT -> ATA_DRDY
* BUSY_STAT -> ATA_BUSY
* MARK_ERR -> ATA_AMNF
* TRK0_ERR -> ATA_TRK0NF
* ABRT_ERR -> ATA_ABORTED
* MCR_ERR -> ATA_MCR
* ID_ERR -> ATA_IDNF
* MC_ERR -> ATA_MC
* ECC_ERR -> ATA_UNC
* ICRC_ERR -> ATA_ICRC
* BBD_ERR -> ATA_BBK
Also:
* ILI_ERR -> ATAPI_ILI
* EOM_ERR -> ATAPI_EOM
* LFS_ERR -> ATAPI_LFS
* CD -> ATAPI_COD
* IO -> ATAPI_IO
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 9224f67..b1fb815 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -136,7 +136,7 @@
local_irq_enable_in_hardirq();
stat = hwif->tp_ops->read_status(hwif);
- if (OK_STAT(stat, READY_STAT, BAD_STAT))
+ if (OK_STAT(stat, ATA_DRDY, BAD_STAT))
drive->mult_count = drive->mult_req;
else {
drive->mult_req = drive->mult_count = 0;
@@ -159,15 +159,15 @@
while (1) {
stat = hwif->tp_ops->read_status(hwif);
- if ((stat & BUSY_STAT) == 0 || retries-- == 0)
+ if ((stat & ATA_BUSY) == 0 || retries-- == 0)
break;
udelay(10);
};
- if (OK_STAT(stat, READY_STAT, BAD_STAT))
+ if (OK_STAT(stat, ATA_DRDY, BAD_STAT))
return ide_stopped;
- if (stat & (ERR_STAT|DRQ_STAT))
+ if (stat & (ATA_ERR | ATA_DRQ))
return ide_error(drive, "set_geometry_intr", stat);
ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL);
@@ -185,7 +185,7 @@
local_irq_enable_in_hardirq();
stat = hwif->tp_ops->read_status(hwif);
- if (!OK_STAT(stat, READY_STAT, BAD_STAT))
+ if (!OK_STAT(stat, ATA_DRDY, BAD_STAT))
return ide_error(drive, "recal_intr", stat);
return ide_stopped;
}
@@ -202,7 +202,7 @@
local_irq_enable_in_hardirq();
stat = hwif->tp_ops->read_status(hwif);
- if (!OK_STAT(stat, READY_STAT, BAD_STAT))
+ if (!OK_STAT(stat, ATA_DRDY, BAD_STAT))
return ide_error(drive, "task_no_data_intr", stat);
/* calls ide_end_drive_cmd */
@@ -225,13 +225,13 @@
for (retries = 0; retries < 1000; retries++) {
stat = hwif->tp_ops->read_status(hwif);
- if (stat & BUSY_STAT)
+ if (stat & ATA_BUSY)
udelay(10);
else
break;
}
- if (stat & BUSY_STAT)
+ if (stat & ATA_BUSY)
printk(KERN_ERR "%s: drive still BUSY!\n", drive->name);
return stat;
@@ -390,7 +390,7 @@
static ide_startstop_t task_in_unexpected(ide_drive_t *drive, struct request *rq, u8 stat)
{
/* Command all done? */
- if (OK_STAT(stat, READY_STAT, BUSY_STAT)) {
+ if (OK_STAT(stat, ATA_DRDY, ATA_BUSY)) {
task_end_request(drive, rq, stat);
return ide_stopped;
}
@@ -410,11 +410,11 @@
u8 stat = hwif->tp_ops->read_status(hwif);
/* Error? */
- if (stat & ERR_STAT)
+ if (stat & ATA_ERR)
return task_error(drive, rq, __func__, stat);
/* Didn't want any data? Odd. */
- if (!(stat & DRQ_STAT))
+ if ((stat & ATA_DRQ) == 0)
return task_in_unexpected(drive, rq, stat);
ide_pio_datablock(drive, rq, 0);
@@ -447,7 +447,7 @@
return task_error(drive, rq, __func__, stat);
/* Deal with unexpected ATA data phase. */
- if (((stat & DRQ_STAT) == 0) ^ !hwif->nleft)
+ if (((stat & ATA_DRQ) == 0) ^ !hwif->nleft)
return task_error(drive, rq, __func__, stat);
if (!hwif->nleft) {
@@ -466,7 +466,7 @@
{
ide_startstop_t startstop;
- if (ide_wait_stat(&startstop, drive, DRQ_STAT,
+ if (ide_wait_stat(&startstop, drive, ATA_DRQ,
drive->bad_wstat, WAIT_DRQ)) {
printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n",
drive->name,