spi: ti-qspi: Simplify qspi_write_msg and qspi_read_msg implementation
Make the unit of wlen to be byte, and simplify the code to avoid duplicate
code for different wlen cases.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 1211b66..a850b40 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -208,53 +208,36 @@
txbuf = t->tx_buf;
cmd = qspi->cmd | QSPI_WR_SNGL;
count = t->len;
- wlen = t->bits_per_word;
+ wlen = t->bits_per_word >> 3; /* in bytes */
while (count) {
switch (wlen) {
- case 8:
+ case 1:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n",
cmd, qspi->dc, *txbuf);
writeb(*txbuf, qspi->base + QSPI_SPI_DATA_REG);
- ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
- ret = wait_for_completion_timeout(&qspi->transfer_complete,
- QSPI_COMPLETION_TIMEOUT);
- if (ret == 0) {
- dev_err(qspi->dev, "write timed out\n");
- return -ETIMEDOUT;
- }
- txbuf += 1;
- count -= 1;
break;
- case 16:
+ case 2:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %04x\n",
cmd, qspi->dc, *txbuf);
writew(*((u16 *)txbuf), qspi->base + QSPI_SPI_DATA_REG);
- ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
- ret = wait_for_completion_timeout(&qspi->transfer_complete,
- QSPI_COMPLETION_TIMEOUT);
- if (ret == 0) {
- dev_err(qspi->dev, "write timed out\n");
- return -ETIMEDOUT;
- }
- txbuf += 2;
- count -= 2;
break;
- case 32:
+ case 4:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %08x\n",
cmd, qspi->dc, *txbuf);
writel(*((u32 *)txbuf), qspi->base + QSPI_SPI_DATA_REG);
- ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
- ret = wait_for_completion_timeout(&qspi->transfer_complete,
- QSPI_COMPLETION_TIMEOUT);
- if (ret == 0) {
- dev_err(qspi->dev, "write timed out\n");
- return -ETIMEDOUT;
- }
- txbuf += 4;
- count -= 4;
break;
}
+
+ ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
+ ret = wait_for_completion_timeout(&qspi->transfer_complete,
+ QSPI_COMPLETION_TIMEOUT);
+ if (ret == 0) {
+ dev_err(qspi->dev, "write timed out\n");
+ return -ETIMEDOUT;
+ }
+ txbuf += wlen;
+ count -= wlen;
}
return 0;
@@ -280,7 +263,7 @@
break;
}
count = t->len;
- wlen = t->bits_per_word;
+ wlen = t->bits_per_word >> 3; /* in bytes */
while (count) {
dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc);
@@ -292,22 +275,18 @@
return -ETIMEDOUT;
}
switch (wlen) {
- case 8:
+ case 1:
*rxbuf = readb(qspi->base + QSPI_SPI_DATA_REG);
- rxbuf += 1;
- count -= 1;
break;
- case 16:
+ case 2:
*((u16 *)rxbuf) = readw(qspi->base + QSPI_SPI_DATA_REG);
- rxbuf += 2;
- count -= 2;
break;
- case 32:
+ case 4:
*((u32 *)rxbuf) = readl(qspi->base + QSPI_SPI_DATA_REG);
- rxbuf += 4;
- count -= 4;
break;
}
+ rxbuf += wlen;
+ count -= wlen;
}
return 0;