tree-wide: Assorted spelling fixes
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index f3757a1..c33360e8 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -28,7 +28,7 @@
*
* Micro9-High has up to 64MB of 32-bit flash on CS1
* Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Lite uses a separate MTD map driver for flash support
* Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
*************************************************************************/
static struct physmap_flash_data micro9_flash_data;
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 9438bf6..ab3712c 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -38,7 +38,7 @@
#define SRC_CR_INIT_MASK 0x00007fff
#define SRC_CR_INIT_VAL 0x2aaa8000
-/* These adresses span 16MB, so use three individual pages */
+/* These addresses span 16MB, so use three individual pages */
static struct resource nhk8815_nand_resources[] = {
{
.name = "nand_addr",
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 653e25b..d0cb5e9 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -356,7 +356,7 @@
/*
* The AVE3e requires two regions of 256MB that it considers
* "invisible". The hardware will not be able to access these
- * adresses, so they should never point to system RAM.
+ * addresses, so they should never point to system RAM.
*/
{
.name = "AVE3e Reserved 0",
@@ -571,7 +571,7 @@
/*
* Some devices and their resources require reserved physical memory from
* the end of the available RAM. This function traverses the list of devices
- * and assigns actual adresses to these.
+ * and assigns actual addresses to these.
*/
static void __init u300_assign_physmem(void)
{
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index f3a1cbb..d591fe1 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
#include <mach/hardware.h>
.macro addruart,rx
- /* If we move the adress using MMU, use this. */
+ /* If we move the address using MMU, use this. */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
index 652e2bb..dda19da 100644
--- a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h
@@ -78,7 +78,7 @@
* others = Special functions (dependant on bank)
*
* Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a seperate set of functions for
+ * registers instead of one, we do not have a separate set of functions for
* each case.
*/
extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
index 36a85f5..a111ad8 100644
--- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
+++ b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h
@@ -12,7 +12,7 @@
* published by the Free Software Foundation.
*/
-/* Note, this is a seperate header file as some of the clock framework
+/* Note, this is a separate header file as some of the clock framework
* needs to touch this if the clk_48m is used as the USB OHCI or other
* peripheral source.
*/
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index 33d421d..d623235 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -135,7 +135,7 @@
* @locktime_m: The lock-time in uS for the MPLL.
* @locktime_u: The lock-time in uS for the UPLL.
* @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to acheive
+ * @need_pll: Set if this driver needs to change the PLL values to achieve
* any frequency changes. This is really only need by devices like the
* S3C2410 where there is no or limited divider between the PLL and the
* ARMCLK.
diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c
index 1734b46..8f79163 100644
--- a/arch/cris/arch-v10/lib/old_checksum.c
+++ b/arch/cris/arch-v10/lib/old_checksum.c
@@ -77,7 +77,7 @@
sum += *buff++;
if (endMarker > buff)
- sum += *(const u8 *)buff; /* add extra byte seperately */
+ sum += *(const u8 *)buff; /* add extra byte separately */
BITOFF;
return (__force __wsum)sum;
diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c
index 6779bcb..c030d02 100644
--- a/arch/cris/arch-v32/mm/tlb.c
+++ b/arch/cris/arch-v32/mm/tlb.c
@@ -189,7 +189,7 @@
spin_unlock(&mmu_context_lock);
/*
- * Remember the pgd for the fault handlers. Keep a seperate
+ * Remember the pgd for the fault handlers. Keep a separate
* copy of it because current and active_mm might be invalid
* at points where * there's still a need to derefer the pgd.
*/
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
index 33e842f..c1a8df2 100644
--- a/arch/h8300/include/asm/io.h
+++ b/arch/h8300/include/asm/io.h
@@ -25,7 +25,7 @@
* memory location directly.
*/
/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
+ * two accesses to memory, which may be undesirable for some devices.
*/
/*
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index ece1bf9..c6c6d93 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -241,7 +241,7 @@
* Note: This stuff is duped here because Altix requires the PCDP to
* locate a usable VGA device due to lack of proper ACPI support. Structures
* could be used from drivers/firmware/pcdp.h, but it was decided that moving
- * this file to a more public location just for Altix use was undesireable.
+ * this file to a more public location just for Altix use was undesirable.
*/
struct hcdp_uart_desc {
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index 4add96d..5890897 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -121,7 +121,7 @@
* bytes have been lost and in which state of the packet structure we are now.
* This usually causes keyboards bytes to be interpreted as mouse movements
* and vice versa, which is very annoying. It seems better to throw away some
- * bytes (that are usually mouse bytes) than to misinterpret them. Therefor I
+ * bytes (that are usually mouse bytes) than to misinterpret them. Therefore I
* introduced the RESYNC state for IKBD data. In this state, the bytes up to
* one that really looks like a key event (0x04..0xf2) or the start of a mouse
* packet (0xf8..0xfb) are thrown away, but at most 2 bytes. This at least
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 359065d5..6e2413e 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -16,7 +16,7 @@
* memory location directly.
*/
/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesireable for some devices.
+ * two accesses to memory, which may be undesirable for some devices.
*/
/*
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index 65b8b4f..d8b5d12 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -490,7 +490,7 @@
compatible = "cfi-flash";
/*
* The Intel P30 chip has 2 non-identical chips on
- * one die, so we need to define 2 seperate regions
+ * one die, so we need to define 2 separate regions
* that are scanned by physmap_of independantly.
*/
reg = <0 0x00000000 0x02000000
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index e85679a..e34347d 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -20,7 +20,7 @@
/**
* struct ccw1 - channel command word
* @cmd_code: command code
- * @flags: flags, like IDA adressing, etc.
+ * @flags: flags, like IDA addressing, etc.
* @count: byte count
* @cda: data address
*
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S
index e27ca63..27c1a2e 100644
--- a/arch/s390/kernel/sclp.S
+++ b/arch/s390/kernel/sclp.S
@@ -221,7 +221,7 @@
lh %r9,0(%r8) # update sccb length
ar %r9,%r6
sth %r9,0(%r8)
- ar %r7,%r6 # update current mto adress
+ ar %r7,%r6 # update current mto address
ltr %r0,%r0 # more characters?
jnz .LinitmtoS4
l %r2,.LwritedataS4-.LbaseS4(%r13)# write data
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 87f1760..554e0b8 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -124,7 +124,7 @@
if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) &
(1<<LEON3_GPTIMER_SEPIRQ))) {
- prom_printf("irq timer not configured with seperate irqs \n");
+ prom_printf("irq timer not configured with separate irqs \n");
BUG();
}
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index e856456..a565ee5 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -1353,7 +1353,7 @@
}
/* Like powerpc we can't get PMU interrupts within the PMU handler,
- * so no need for seperate NMI and IRQ chains as on x86.
+ * so no need for separate NMI and IRQ chains as on x86.
*/
static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
diff --git a/arch/x86/crypto/twofish-i586-asm_32.S b/arch/x86/crypto/twofish-i586-asm_32.S
index 39b98ed..575331c 100644
--- a/arch/x86/crypto/twofish-i586-asm_32.S
+++ b/arch/x86/crypto/twofish-i586-asm_32.S
@@ -22,7 +22,7 @@
#include <asm/asm-offsets.h>
-/* return adress at 0 */
+/* return address at 0 */
#define in_blk 12 /* input byte array address parameter*/
#define out_blk 8 /* output byte array address parameter*/
@@ -230,8 +230,8 @@
push %edi
mov tfm + 16(%esp), %ebp /* abuse the base pointer: set new base bointer to the crypto tfm */
- add $crypto_tfm_ctx_offset, %ebp /* ctx adress */
- mov in_blk+16(%esp),%edi /* input adress in edi */
+ add $crypto_tfm_ctx_offset, %ebp /* ctx address */
+ mov in_blk+16(%esp),%edi /* input address in edi */
mov (%edi), %eax
mov b_offset(%edi), %ebx
@@ -286,8 +286,8 @@
mov tfm + 16(%esp), %ebp /* abuse the base pointer: set new base bointer to the crypto tfm */
- add $crypto_tfm_ctx_offset, %ebp /* ctx adress */
- mov in_blk+16(%esp),%edi /* input adress in edi */
+ add $crypto_tfm_ctx_offset, %ebp /* ctx address */
+ mov in_blk+16(%esp),%edi /* input address in edi */
mov (%edi), %eax
mov b_offset(%edi), %ebx
diff --git a/arch/x86/crypto/twofish-x86_64-asm_64.S b/arch/x86/crypto/twofish-x86_64-asm_64.S
index 35974a5..573aa10 100644
--- a/arch/x86/crypto/twofish-x86_64-asm_64.S
+++ b/arch/x86/crypto/twofish-x86_64-asm_64.S
@@ -221,11 +221,11 @@
twofish_enc_blk:
pushq R1
- /* %rdi contains the crypto tfm adress */
- /* %rsi contains the output adress */
- /* %rdx contains the input adress */
- add $crypto_tfm_ctx_offset, %rdi /* set ctx adress */
- /* ctx adress is moved to free one non-rex register
+ /* %rdi contains the crypto tfm address */
+ /* %rsi contains the output address */
+ /* %rdx contains the input address */
+ add $crypto_tfm_ctx_offset, %rdi /* set ctx address */
+ /* ctx address is moved to free one non-rex register
as target for the 8bit high operations */
mov %rdi, %r11
@@ -274,11 +274,11 @@
twofish_dec_blk:
pushq R1
- /* %rdi contains the crypto tfm adress */
- /* %rsi contains the output adress */
- /* %rdx contains the input adress */
- add $crypto_tfm_ctx_offset, %rdi /* set ctx adress */
- /* ctx adress is moved to free one non-rex register
+ /* %rdi contains the crypto tfm address */
+ /* %rsi contains the output address */
+ /* %rdx contains the input address */
+ add $crypto_tfm_ctx_offset, %rdi /* set ctx address */
+ /* ctx address is moved to free one non-rex register
as target for the 8bit high operations */
mov %rdi, %r11
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 2d8b503..3d1e6f1 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -27,7 +27,7 @@
#define GET_CR2_INTO_RCX movq %cr2, %rcx
#endif
-/* we are not able to switch in one step to the final KERNEL ADRESS SPACE
+/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
* because we need identity-mapped pages.
*
*/
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 2bbde60..fb99f7e 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -1309,7 +1309,7 @@
/*
* get_tce_space_from_tar():
* Function for kdump case. Get the tce tables from first kernel
- * by reading the contents of the base adress register of calgary iommu
+ * by reading the contents of the base address register of calgary iommu
*/
static void __init get_tce_space_from_tar(void)
{
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 597683a..dec8f68 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -50,7 +50,7 @@
* unstable. We do this because unlike Time Of Day,
* the scheduler clock tolerates small errors and it's
* very important for it to be as fast as the platform
- * can achive it. )
+ * can achieve it. )
*/
if (unlikely(tsc_disabled)) {
/* No locking but a rare wrong value is not a big deal: */
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 80d24c4..77fc9f6 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -104,7 +104,7 @@
* excsave has been restored, and
* stack pointer (a1) has been set.
*
- * Note: _user_exception might be at an odd adress. Don't use call0..call12
+ * Note: _user_exception might be at an odd address. Don't use call0..call12
*/
ENTRY(user_exception)
@@ -244,7 +244,7 @@
* excsave has been restored, and
* stack pointer (a1) has been set.
*
- * Note: _kernel_exception might be at an odd adress. Don't use call0..call12
+ * Note: _kernel_exception might be at an odd address. Don't use call0..call12
*/
ENTRY(kernel_exception)