cfg80211: Add multiple scan plans for scheduled scan
Add the option to configure multiple 'scan plans' for scheduled scan.
Each 'scan plan' defines the number of scan cycles and the interval
between scans. The scan plans are executed in the order they were
configured. The last scan plan will always run infinitely and thus
defines only the interval between scans.
The maximum number of scan plans supported by the device and the
maximum number of iterations in a single scan plan are advertised
to userspace so it can configure the scan plans appropriately.
When scheduled scan results are received there is no way to know which
scan plan is being currently executed, so there is no way to know when
the next scan iteration will start. This is not a problem, however.
The scan start timestamp is only used for flushing old scan results,
and there is no difference between flushing all results received until
the end of the previous iteration or the start of the current one,
since no results will be received in between.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index fb0712b..28c29e7 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -479,6 +479,12 @@
[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI] = { .type = NLA_U32 },
};
+static const struct nla_policy
+nl80211_plan_policy[NL80211_SCHED_SCAN_PLAN_MAX + 1] = {
+ [NL80211_SCHED_SCAN_PLAN_INTERVAL] = { .type = NLA_U32 },
+ [NL80211_SCHED_SCAN_PLAN_ITERATIONS] = { .type = NLA_U32 },
+};
+
static int nl80211_prepare_wdev_dump(struct sk_buff *skb,
struct netlink_callback *cb,
struct cfg80211_registered_device **rdev,
@@ -1304,7 +1310,13 @@
nla_put_u16(msg, NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN,
rdev->wiphy.max_sched_scan_ie_len) ||
nla_put_u8(msg, NL80211_ATTR_MAX_MATCH_SETS,
- rdev->wiphy.max_match_sets))
+ rdev->wiphy.max_match_sets) ||
+ nla_put_u32(msg, NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
+ rdev->wiphy.max_sched_scan_plans) ||
+ nla_put_u32(msg, NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
+ rdev->wiphy.max_sched_scan_plan_interval) ||
+ nla_put_u32(msg, NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
+ rdev->wiphy.max_sched_scan_plan_iterations))
goto nla_put_failure;
if ((rdev->wiphy.flags & WIPHY_FLAG_IBSS_RSN) &&
@@ -5974,14 +5986,100 @@
return err;
}
+static int
+nl80211_parse_sched_scan_plans(struct wiphy *wiphy, int n_plans,
+ struct cfg80211_sched_scan_request *request,
+ struct nlattr **attrs)
+{
+ int tmp, err, i = 0;
+ struct nlattr *attr;
+
+ if (!attrs[NL80211_ATTR_SCHED_SCAN_PLANS]) {
+ u32 interval;
+
+ /*
+ * If scan plans are not specified,
+ * %NL80211_ATTR_SCHED_SCAN_INTERVAL must be specified. In this
+ * case one scan plan will be set with the specified scan
+ * interval and infinite number of iterations.
+ */
+ if (!attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
+ return -EINVAL;
+
+ interval = nla_get_u32(attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL]);
+ if (!interval)
+ return -EINVAL;
+
+ request->scan_plans[0].interval =
+ DIV_ROUND_UP(interval, MSEC_PER_SEC);
+ if (!request->scan_plans[0].interval)
+ return -EINVAL;
+
+ if (request->scan_plans[0].interval >
+ wiphy->max_sched_scan_plan_interval)
+ request->scan_plans[0].interval =
+ wiphy->max_sched_scan_plan_interval;
+
+ return 0;
+ }
+
+ nla_for_each_nested(attr, attrs[NL80211_ATTR_SCHED_SCAN_PLANS], tmp) {
+ struct nlattr *plan[NL80211_SCHED_SCAN_PLAN_MAX + 1];
+
+ if (WARN_ON(i >= n_plans))
+ return -EINVAL;
+
+ err = nla_parse(plan, NL80211_SCHED_SCAN_PLAN_MAX,
+ nla_data(attr), nla_len(attr),
+ nl80211_plan_policy);
+ if (err)
+ return err;
+
+ if (!plan[NL80211_SCHED_SCAN_PLAN_INTERVAL])
+ return -EINVAL;
+
+ request->scan_plans[i].interval =
+ nla_get_u32(plan[NL80211_SCHED_SCAN_PLAN_INTERVAL]);
+ if (!request->scan_plans[i].interval ||
+ request->scan_plans[i].interval >
+ wiphy->max_sched_scan_plan_interval)
+ return -EINVAL;
+
+ if (plan[NL80211_SCHED_SCAN_PLAN_ITERATIONS]) {
+ request->scan_plans[i].iterations =
+ nla_get_u32(plan[NL80211_SCHED_SCAN_PLAN_ITERATIONS]);
+ if (!request->scan_plans[i].iterations ||
+ (request->scan_plans[i].iterations >
+ wiphy->max_sched_scan_plan_iterations))
+ return -EINVAL;
+ } else if (i < n_plans - 1) {
+ /*
+ * All scan plans but the last one must specify
+ * a finite number of iterations
+ */
+ return -EINVAL;
+ }
+
+ i++;
+ }
+
+ /*
+ * The last scan plan must not specify the number of
+ * iterations, it is supposed to run infinitely
+ */
+ if (request->scan_plans[n_plans - 1].iterations)
+ return -EINVAL;
+
+ return 0;
+}
+
static struct cfg80211_sched_scan_request *
nl80211_parse_sched_scan(struct wiphy *wiphy, struct wireless_dev *wdev,
struct nlattr **attrs)
{
struct cfg80211_sched_scan_request *request;
struct nlattr *attr;
- int err, tmp, n_ssids = 0, n_match_sets = 0, n_channels, i;
- u32 interval;
+ int err, tmp, n_ssids = 0, n_match_sets = 0, n_channels, i, n_plans = 0;
enum ieee80211_band band;
size_t ie_len;
struct nlattr *tb[NL80211_SCHED_SCAN_MATCH_ATTR_MAX + 1];
@@ -5990,13 +6088,6 @@
if (!is_valid_ie_attr(attrs[NL80211_ATTR_IE]))
return ERR_PTR(-EINVAL);
- if (!attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
- return ERR_PTR(-EINVAL);
-
- interval = nla_get_u32(attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL]);
- if (interval == 0)
- return ERR_PTR(-EINVAL);
-
if (attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
n_channels = validate_scan_freqs(
attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
@@ -6060,9 +6151,37 @@
if (ie_len > wiphy->max_sched_scan_ie_len)
return ERR_PTR(-EINVAL);
+ if (attrs[NL80211_ATTR_SCHED_SCAN_PLANS]) {
+ /*
+ * NL80211_ATTR_SCHED_SCAN_INTERVAL must not be specified since
+ * each scan plan already specifies its own interval
+ */
+ if (attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
+ return ERR_PTR(-EINVAL);
+
+ nla_for_each_nested(attr,
+ attrs[NL80211_ATTR_SCHED_SCAN_PLANS], tmp)
+ n_plans++;
+ } else {
+ /*
+ * The scan interval attribute is kept for backward
+ * compatibility. If no scan plans are specified and sched scan
+ * interval is specified, one scan plan will be set with this
+ * scan interval and infinite number of iterations.
+ */
+ if (!attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
+ return ERR_PTR(-EINVAL);
+
+ n_plans = 1;
+ }
+
+ if (!n_plans || n_plans > wiphy->max_sched_scan_plans)
+ return ERR_PTR(-EINVAL);
+
request = kzalloc(sizeof(*request)
+ sizeof(*request->ssids) * n_ssids
+ sizeof(*request->match_sets) * n_match_sets
+ + sizeof(*request->scan_plans) * n_plans
+ sizeof(*request->channels) * n_channels
+ ie_len, GFP_KERNEL);
if (!request)
@@ -6090,6 +6209,18 @@
}
request->n_match_sets = n_match_sets;
+ if (n_match_sets)
+ request->scan_plans = (void *)(request->match_sets +
+ n_match_sets);
+ else if (request->ie)
+ request->scan_plans = (void *)(request->ie + ie_len);
+ else if (n_ssids)
+ request->scan_plans = (void *)(request->ssids + n_ssids);
+ else
+ request->scan_plans = (void *)(request->channels + n_channels);
+
+ request->n_scan_plans = n_plans;
+
i = 0;
if (attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
/* user specified, bail out if channel not found */
@@ -6252,7 +6383,10 @@
request->delay =
nla_get_u32(attrs[NL80211_ATTR_SCHED_SCAN_DELAY]);
- request->interval = interval;
+ err = nl80211_parse_sched_scan_plans(wiphy, n_plans, request, attrs);
+ if (err)
+ goto out_free;
+
request->scan_start = jiffies;
return request;
@@ -8850,7 +8984,7 @@
static int nl80211_send_wowlan_nd(struct sk_buff *msg,
struct cfg80211_sched_scan_request *req)
{
- struct nlattr *nd, *freqs, *matches, *match;
+ struct nlattr *nd, *freqs, *matches, *match, *scan_plans, *scan_plan;
int i;
if (!req)
@@ -8860,7 +8994,9 @@
if (!nd)
return -ENOBUFS;
- if (nla_put_u32(msg, NL80211_ATTR_SCHED_SCAN_INTERVAL, req->interval))
+ if (req->n_scan_plans == 1 &&
+ nla_put_u32(msg, NL80211_ATTR_SCHED_SCAN_INTERVAL,
+ req->scan_plans[0].interval * 1000))
return -ENOBUFS;
if (nla_put_u32(msg, NL80211_ATTR_SCHED_SCAN_DELAY, req->delay))
@@ -8887,6 +9023,23 @@
nla_nest_end(msg, matches);
}
+ scan_plans = nla_nest_start(msg, NL80211_ATTR_SCHED_SCAN_PLANS);
+ if (!scan_plans)
+ return -ENOBUFS;
+
+ for (i = 0; i < req->n_scan_plans; i++) {
+ scan_plan = nla_nest_start(msg, i + 1);
+ if (!scan_plan ||
+ nla_put_u32(msg, NL80211_SCHED_SCAN_PLAN_INTERVAL,
+ req->scan_plans[i].interval) ||
+ (req->scan_plans[i].iterations &&
+ nla_put_u32(msg, NL80211_SCHED_SCAN_PLAN_ITERATIONS,
+ req->scan_plans[i].iterations)))
+ return -ENOBUFS;
+ nla_nest_end(msg, scan_plan);
+ }
+ nla_nest_end(msg, scan_plans);
+
nla_nest_end(msg, nd);
return 0;