drivers/ide/amd74xx.c - kernel/msm-4.9 - Gitiles

 /*
  * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
  * IDE driver for Linux.
  *
  * Copyright (c) 2000-2002 Vojtech Pavlik
  * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz
  *
  * Based on the work of:
  *      Andre Hedrick
  */

 /*
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */

 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/ide.h>

 #define DRV_NAME "amd74xx"

 enum {
 	AMD_IDE_CONFIG		= 0x41,
 	AMD_CABLE_DETECT	= 0x42,
 	AMD_DRIVE_TIMING	= 0x48,
 	AMD_8BIT_TIMING		= 0x4e,
 	AMD_ADDRESS_SETUP	= 0x4c,
 	AMD_UDMA_TIMING		= 0x50,
 };

 static unsigned int amd_80w;
 static unsigned int amd_clock;

 static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
 static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };

 static inline u8 amd_offset(struct pci_dev *dev)
 {
 	return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0;
 }

 /*
  * amd_set_speed() writes timing values to the chipset registers
  */

 static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
 			  struct ide_timing *timing)
 {
 	u8 t = 0, offset = amd_offset(dev);

 	pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t);
 	t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
 	pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t);

 	pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)),
 		((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));

 	pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn),
 		((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));

 	switch (udma_mask) {
 	case ATA_UDMA2: t = timing->udma ? (0xc0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
 	case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break;
 	case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break;
 	case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break;
 	default: return;
 	}

 	if (timing->udma)
 		pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + 3 - dn, t);
 }

 /*
  * amd_set_drive() computes timing values and configures the chipset
  * to a desired transfer mode.  It also can be called by upper layers.
  */

 static void amd_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	ide_drive_t *peer = ide_get_pair_dev(drive);
 	struct ide_timing t, p;
 	int T, UT;
 	u8 udma_mask = hwif->ultra_mask;
 	const u8 speed = drive->dma_mode;

 	T = 1000000000 / amd_clock;
 	UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);

 	ide_timing_compute(drive, speed, &t, T, UT);

 	if (peer) {
 		ide_timing_compute(peer, peer->pio_mode, &p, T, UT);
 		ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
 	}

 	if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
 	if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;

 	amd_set_speed(dev, drive->dn, udma_mask, &t);
 }

 /*
  * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
  */

 static void amd_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	drive->dma_mode = drive->pio_mode;
 	amd_set_drive(hwif, drive);
 }

 static void amd7409_cable_detect(struct pci_dev *dev)
 {
 	/* no host side cable detection */
 	amd_80w = 0x03;
 }

 static void amd7411_cable_detect(struct pci_dev *dev)
 {
 	int i;
 	u32 u = 0;
 	u8 t = 0, offset = amd_offset(dev);

 	pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t);
 	pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u);
 	amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
 	for (i = 24; i >= 0; i -= 8)
 		if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
 			printk(KERN_WARNING DRV_NAME " %s: BIOS didn't set "
 				"cable bits correctly. Enabling workaround.\n",
 				pci_name(dev));
 			amd_80w |= (1 << (1 - (i >> 4)));
 		}
 }

 /*
  * The initialization callback.  Initialize drive independent registers.
  */

 static int init_chipset_amd74xx(struct pci_dev *dev)
 {
 	u8 t = 0, offset = amd_offset(dev);

 /*
  * Check 80-wire cable presence.
  */

 	if (dev->vendor == PCI_VENDOR_ID_AMD &&
 	    dev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
 		; /* no UDMA > 2 */
 	else if (dev->vendor == PCI_VENDOR_ID_AMD &&
 		 dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
 		amd7409_cable_detect(dev);
 	else
 		amd7411_cable_detect(dev);

 /*
  * Take care of prefetch & postwrite.
  */

 	pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t);
 	/*
 	 * Check for broken FIFO support.
 	 */
 	if (dev->vendor == PCI_VENDOR_ID_AMD &&
 	    dev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
 		t &= 0x0f;
 	else
 		t |= 0xf0;
 	pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t);

 	return 0;
 }

 static u8 amd_cable_detect(ide_hwif_t *hwif)
 {
 	if ((amd_80w >> hwif->channel) & 1)
 		return ATA_CBL_PATA80;
 	else
 		return ATA_CBL_PATA40;
 }

 static const struct ide_port_ops amd_port_ops = {
 	.set_pio_mode		= amd_set_pio_mode,
 	.set_dma_mode		= amd_set_drive,
 	.cable_detect		= amd_cable_detect,
 };

 #define IDE_HFLAGS_AMD \
 	(IDE_HFLAG_PIO_NO_BLACKLIST | \
 	 IDE_HFLAG_POST_SET_MODE | \
 	 IDE_HFLAG_IO_32BIT | \
 	 IDE_HFLAG_UNMASK_IRQS)

 #define DECLARE_AMD_DEV(swdma, udma)				\
 	{								\
 		.name		= DRV_NAME,				\
 		.init_chipset	= init_chipset_amd74xx,			\
 		.enablebits	= {{0x40,0x02,0x02}, {0x40,0x01,0x01}},	\
 		.port_ops	= &amd_port_ops,			\
 		.host_flags	= IDE_HFLAGS_AMD,			\
 		.pio_mask	= ATA_PIO5,				\
 		.swdma_mask	= swdma,				\
 		.mwdma_mask	= ATA_MWDMA2,				\
 		.udma_mask	= udma,					\
 	}

 #define DECLARE_NV_DEV(udma)					\
 	{								\
 		.name		= DRV_NAME,				\
 		.init_chipset	= init_chipset_amd74xx,			\
 		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x01,0x01}},	\
 		.port_ops	= &amd_port_ops,			\
 		.host_flags	= IDE_HFLAGS_AMD,			\
 		.pio_mask	= ATA_PIO5,				\
 		.swdma_mask	= ATA_SWDMA2,				\
 		.mwdma_mask	= ATA_MWDMA2,				\
 		.udma_mask	= udma,					\
 	}

 static const struct ide_port_info amd74xx_chipsets[] __devinitconst = {
 	/* 0: AMD7401 */	DECLARE_AMD_DEV(0x00, ATA_UDMA2),
 	/* 1: AMD7409 */	DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4),
 	/* 2: AMD7411/7441 */	DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
 	/* 3: AMD8111 */	DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA6),

 	/* 4: NFORCE */		DECLARE_NV_DEV(ATA_UDMA5),
 	/* 5: >= NFORCE2 */	DECLARE_NV_DEV(ATA_UDMA6),

 	/* 6: AMD5536 */	DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
 };

 static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct ide_port_info d;
 	u8 idx = id->driver_data;

 	d = amd74xx_chipsets[idx];

 	/*
 	 * Check for bad SWDMA and incorrectly wired Serenade mainboards.
 	 */
 	if (idx == 1) {
 		if (dev->revision <= 7)
 			d.swdma_mask = 0;
 		d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
 	} else if (idx == 3) {
 		if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
 		    dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
 			d.udma_mask = ATA_UDMA5;
 	}

 	/*
 	 * It seems that on some nVidia controllers using AltStatus
 	 * register can be unreliable so default to Status register
 	 * if the device is in Compatibility Mode.
 	 */
 	if (dev->vendor == PCI_VENDOR_ID_NVIDIA &&
 	    ide_pci_is_in_compatibility_mode(dev))
 		d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS;

 	printk(KERN_INFO "%s %s: UDMA%s controller\n",
 		d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);

 	/*
 	* Determine the system bus clock.
 	*/
 	amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;

 	switch (amd_clock) {
 	case 33000: amd_clock = 33333; break;
 	case 37000: amd_clock = 37500; break;
 	case 41000: amd_clock = 41666; break;
 	}

 	if (amd_clock < 20000 || amd_clock > 50000) {
 		printk(KERN_WARNING "%s: User given PCI clock speed impossible"
 				    " (%d), using 33 MHz instead.\n",
 				    d.name, amd_clock);
 		amd_clock = 33333;
 	}

 	return ide_pci_init_one(dev, &d, NULL);
 }

 static const struct pci_device_id amd74xx_pci_tbl[] = {
 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_COBRA_7401),		 0 },
 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_VIPER_7409),		 1 },
 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_VIPER_7411),		 2 },
 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_OPUS_7441),		 2 },
 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_8111_IDE),		 3 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_IDE),	 4 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE),	 5 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE),	 5 },
 #ifdef CONFIG_BLK_DEV_IDE_SATA
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA),	 5 },
 #endif
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE),	 5 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE),	 5 },
 #ifdef CONFIG_BLK_DEV_IDE_SATA
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA),	 5 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2),	 5 },
 #endif
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE),	 5 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE),	 5 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE),	 5 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE),	 5 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE),	 5 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE),	 5 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE),	 5 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE),	 5 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE),	 5 },
 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_CS5536_IDE),		 6 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);

 static struct pci_driver amd74xx_pci_driver = {
 	.name		= "AMD_IDE",
 	.id_table	= amd74xx_pci_tbl,
 	.probe		= amd74xx_probe,
 	.remove		= ide_pci_remove,
 	.suspend	= ide_pci_suspend,
 	.resume		= ide_pci_resume,
 };

 static int __init amd74xx_ide_init(void)
 {
 	return ide_pci_register_driver(&amd74xx_pci_driver);
 }

 static void __exit amd74xx_ide_exit(void)
 {
 	pci_unregister_driver(&amd74xx_pci_driver);
 }

 module_init(amd74xx_ide_init);
 module_exit(amd74xx_ide_exit);

 MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("AMD PCI IDE driver");
 MODULE_LICENSE("GPL");
	/*
	* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
	* IDE driver for Linux.
	*
	* Copyright (c) 2000-2002 Vojtech Pavlik
	* Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz
	*
	* Based on the work of:
	* Andre Hedrick
	*/

	/*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License version 2 as published by
	* the Free Software Foundation.
	*/

	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/pci.h>
	#include <linux/init.h>
	#include <linux/ide.h>

	#define DRV_NAME "amd74xx"

	enum {
	AMD_IDE_CONFIG = 0x41,
	AMD_CABLE_DETECT = 0x42,
	AMD_DRIVE_TIMING = 0x48,
	AMD_8BIT_TIMING = 0x4e,
	AMD_ADDRESS_SETUP = 0x4c,
	AMD_UDMA_TIMING = 0x50,
	};

	static unsigned int amd_80w;
	static unsigned int amd_clock;

	static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
	static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };

	static inline u8 amd_offset(struct pci_dev *dev)
	{
	return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0;
	}

	/*
	* amd_set_speed() writes timing values to the chipset registers
	*/

	static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
	struct ide_timing *timing)
	{
	u8 t = 0, offset = amd_offset(dev);

	pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t);
	t = (t & ~(3 << ((3 - dn) << 1))) \| ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
	pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t);

	pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)),
	((clamp_val(timing->act8b, 1, 16) - 1) << 4) \| (clamp_val(timing->rec8b, 1, 16) - 1));

	pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn),
	((clamp_val(timing->active, 1, 16) - 1) << 4) \| (clamp_val(timing->recover, 1, 16) - 1));

	switch (udma_mask) {
	case ATA_UDMA2: t = timing->udma ? (0xc0 \| (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
	case ATA_UDMA4: t = timing->udma ? (0xc0 \| amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break;
	case ATA_UDMA5: t = timing->udma ? (0xc0 \| amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break;
	case ATA_UDMA6: t = timing->udma ? (0xc0 \| amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break;
	default: return;
	}

	if (timing->udma)
	pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + 3 - dn, t);
	}

	/*
	* amd_set_drive() computes timing values and configures the chipset
	* to a desired transfer mode. It also can be called by upper layers.
	*/

	static void amd_set_drive(ide_hwif_t hwif, ide_drive_t drive)
	{
	struct pci_dev *dev = to_pci_dev(hwif->dev);
	ide_drive_t *peer = ide_get_pair_dev(drive);
	struct ide_timing t, p;
	int T, UT;
	u8 udma_mask = hwif->ultra_mask;
	const u8 speed = drive->dma_mode;

	T = 1000000000 / amd_clock;
	UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);

	ide_timing_compute(drive, speed, &t, T, UT);

	if (peer) {
	ide_timing_compute(peer, peer->pio_mode, &p, T, UT);
	ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
	}

	if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
	if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;

	amd_set_speed(dev, drive->dn, udma_mask, &t);
	}

	/*
	* amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
	*/

	static void amd_set_pio_mode(ide_hwif_t hwif, ide_drive_t drive)
	{
	drive->dma_mode = drive->pio_mode;
	amd_set_drive(hwif, drive);
	}

	static void amd7409_cable_detect(struct pci_dev *dev)
	{
	/* no host side cable detection */
	amd_80w = 0x03;
	}

	static void amd7411_cable_detect(struct pci_dev *dev)
	{
	int i;
	u32 u = 0;
	u8 t = 0, offset = amd_offset(dev);

	pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t);
	pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u);
	amd_80w = ((t & 0x3) ? 1 : 0) \| ((t & 0xc) ? 2 : 0);
	for (i = 24; i >= 0; i -= 8)
	if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
	printk(KERN_WARNING DRV_NAME " %s: BIOS didn't set "
	"cable bits correctly. Enabling workaround.\n",
	pci_name(dev));
	amd_80w \|= (1 << (1 - (i >> 4)));
	}
	}

	/*
	* The initialization callback. Initialize drive independent registers.
	*/

	static int init_chipset_amd74xx(struct pci_dev *dev)
	{
	u8 t = 0, offset = amd_offset(dev);

	/*
	* Check 80-wire cable presence.
	*/

	if (dev->vendor == PCI_VENDOR_ID_AMD &&
	dev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
	; /* no UDMA > 2 */
	else if (dev->vendor == PCI_VENDOR_ID_AMD &&
	dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
	amd7409_cable_detect(dev);
	else
	amd7411_cable_detect(dev);

	/*
	* Take care of prefetch & postwrite.
	*/

	pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t);
	/*
	* Check for broken FIFO support.
	*/
	if (dev->vendor == PCI_VENDOR_ID_AMD &&
	dev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
	t &= 0x0f;
	else
	t \|= 0xf0;
	pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t);

	return 0;
	}

	static u8 amd_cable_detect(ide_hwif_t *hwif)
	{
	if ((amd_80w >> hwif->channel) & 1)
	return ATA_CBL_PATA80;
	else
	return ATA_CBL_PATA40;
	}

	static const struct ide_port_ops amd_port_ops = {
	.set_pio_mode = amd_set_pio_mode,
	.set_dma_mode = amd_set_drive,
	.cable_detect = amd_cable_detect,
	};

	#define IDE_HFLAGS_AMD \
	(IDE_HFLAG_PIO_NO_BLACKLIST \| \
	IDE_HFLAG_POST_SET_MODE \| \
	IDE_HFLAG_IO_32BIT \| \
	IDE_HFLAG_UNMASK_IRQS)

	#define DECLARE_AMD_DEV(swdma, udma) \
	{ \
	.name = DRV_NAME, \
	.init_chipset = init_chipset_amd74xx, \
	.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
	.port_ops = &amd_port_ops, \
	.host_flags = IDE_HFLAGS_AMD, \
	.pio_mask = ATA_PIO5, \
	.swdma_mask = swdma, \
	.mwdma_mask = ATA_MWDMA2, \
	.udma_mask = udma, \
	}

	#define DECLARE_NV_DEV(udma) \
	{ \
	.name = DRV_NAME, \
	.init_chipset = init_chipset_amd74xx, \
	.enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
	.port_ops = &amd_port_ops, \
	.host_flags = IDE_HFLAGS_AMD, \
	.pio_mask = ATA_PIO5, \
	.swdma_mask = ATA_SWDMA2, \
	.mwdma_mask = ATA_MWDMA2, \
	.udma_mask = udma, \
	}

	static const struct ide_port_info amd74xx_chipsets[] __devinitconst = {
	/* 0: AMD7401 */ DECLARE_AMD_DEV(0x00, ATA_UDMA2),
	/* 1: AMD7409 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4),
	/* 2: AMD7411/7441 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
	/* 3: AMD8111 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA6),

	/* 4: NFORCE */ DECLARE_NV_DEV(ATA_UDMA5),
	/* 5: >= NFORCE2 */ DECLARE_NV_DEV(ATA_UDMA6),

	/* 6: AMD5536 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
	};

	static int __devinit amd74xx_probe(struct pci_dev dev, const struct pci_device_id id)
	{
	struct ide_port_info d;
	u8 idx = id->driver_data;

	d = amd74xx_chipsets[idx];

	/*
	* Check for bad SWDMA and incorrectly wired Serenade mainboards.
	*/
	if (idx == 1) {
	if (dev->revision <= 7)
	d.swdma_mask = 0;
	d.host_flags \|= IDE_HFLAG_CLEAR_SIMPLEX;
	} else if (idx == 3) {
	if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
	dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
	d.udma_mask = ATA_UDMA5;
	}

	/*
	* It seems that on some nVidia controllers using AltStatus
	* register can be unreliable so default to Status register
	* if the device is in Compatibility Mode.
	*/
	if (dev->vendor == PCI_VENDOR_ID_NVIDIA &&
	ide_pci_is_in_compatibility_mode(dev))
	d.host_flags \|= IDE_HFLAG_BROKEN_ALTSTATUS;

	printk(KERN_INFO "%s %s: UDMA%s controller\n",
	d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);

	/*
	* Determine the system bus clock.
	*/
	amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;

	switch (amd_clock) {
	case 33000: amd_clock = 33333; break;
	case 37000: amd_clock = 37500; break;
	case 41000: amd_clock = 41666; break;
	}

	if (amd_clock < 20000 \|\| amd_clock > 50000) {
	printk(KERN_WARNING "%s: User given PCI clock speed impossible"
	" (%d), using 33 MHz instead.\n",
	d.name, amd_clock);
	amd_clock = 33333;
	}

	return ide_pci_init_one(dev, &d, NULL);
	}

	static const struct pci_device_id amd74xx_pci_tbl[] = {
	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 },
	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 },
	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 2 },
	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 2 },
	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 3 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 4 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 5 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 5 },
	#ifdef CONFIG_BLK_DEV_IDE_SATA
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), 5 },
	#endif
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 5 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 5 },
	#ifdef CONFIG_BLK_DEV_IDE_SATA
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), 5 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), 5 },
	#endif
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 5 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 5 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 5 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 5 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 5 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 5 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 5 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 5 },
	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 5 },
	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 6 },
	{ 0, },
	};
	MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);

	static struct pci_driver amd74xx_pci_driver = {
	.name = "AMD_IDE",
	.id_table = amd74xx_pci_tbl,
	.probe = amd74xx_probe,
	.remove = ide_pci_remove,
	.suspend = ide_pci_suspend,
	.resume = ide_pci_resume,
	};

	static int __init amd74xx_ide_init(void)
	{
	return ide_pci_register_driver(&amd74xx_pci_driver);
	}

	static void __exit amd74xx_ide_exit(void)
	{
	pci_unregister_driver(&amd74xx_pci_driver);
	}

	module_init(amd74xx_ide_init);
	module_exit(amd74xx_ide_exit);

	MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz");
	MODULE_DESCRIPTION("AMD PCI IDE driver");
	MODULE_LICENSE("GPL");