blob: d0928c91c21c5ca348791c3058eb4c812ee6c2c5 [file] [log] [blame]
/*
* Linux device driver for RTL8180 / RTL8185
*
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
*
* Based on the r8180 driver, which is:
* Copyright 2004-2005 Andrea Merello <andreamrl@tiscali.it>, et al.
*
* Thanks to Realtek for their support!
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/eeprom_93cx6.h>
#include <net/mac80211.h>
#include "rtl8180.h"
#include "rtl8180_rtl8225.h"
#include "rtl8180_sa2400.h"
#include "rtl8180_max2820.h"
#include "rtl8180_grf5101.h"
MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
MODULE_DESCRIPTION("RTL8180 / RTL8185 PCI wireless driver");
MODULE_LICENSE("GPL");
static struct pci_device_id rtl8180_table[] __devinitdata = {
/* rtl8185 */
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8185) },
{ PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x700f) },
{ PCI_DEVICE(PCI_VENDOR_ID_BELKIN, 0x701f) },
/* rtl8180 */
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8180) },
{ PCI_DEVICE(0x1799, 0x6001) },
{ PCI_DEVICE(0x1799, 0x6020) },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x3300) },
{ }
};
MODULE_DEVICE_TABLE(pci, rtl8180_table);
static const struct ieee80211_rate rtl818x_rates[] = {
{ .bitrate = 10, .hw_value = 0, },
{ .bitrate = 20, .hw_value = 1, },
{ .bitrate = 55, .hw_value = 2, },
{ .bitrate = 110, .hw_value = 3, },
{ .bitrate = 60, .hw_value = 4, },
{ .bitrate = 90, .hw_value = 5, },
{ .bitrate = 120, .hw_value = 6, },
{ .bitrate = 180, .hw_value = 7, },
{ .bitrate = 240, .hw_value = 8, },
{ .bitrate = 360, .hw_value = 9, },
{ .bitrate = 480, .hw_value = 10, },
{ .bitrate = 540, .hw_value = 11, },
};
static const struct ieee80211_channel rtl818x_channels[] = {
{ .center_freq = 2412 },
{ .center_freq = 2417 },
{ .center_freq = 2422 },
{ .center_freq = 2427 },
{ .center_freq = 2432 },
{ .center_freq = 2437 },
{ .center_freq = 2442 },
{ .center_freq = 2447 },
{ .center_freq = 2452 },
{ .center_freq = 2457 },
{ .center_freq = 2462 },
{ .center_freq = 2467 },
{ .center_freq = 2472 },
{ .center_freq = 2484 },
};
void rtl8180_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
{
struct rtl8180_priv *priv = dev->priv;
int i = 10;
u32 buf;
buf = (data << 8) | addr;
rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf | 0x80);
while (i--) {
rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->PHY[0], buf);
if (rtl818x_ioread8(priv, &priv->map->PHY[2]) == (data & 0xFF))
return;
}
}
static void rtl8180_handle_rx(struct ieee80211_hw *dev)
{
struct rtl8180_priv *priv = dev->priv;
unsigned int count = 32;
while (count--) {
struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx];
struct sk_buff *skb = priv->rx_buf[priv->rx_idx];
u32 flags = le32_to_cpu(entry->flags);
if (flags & RTL8180_RX_DESC_FLAG_OWN)
return;
if (unlikely(flags & (RTL8180_RX_DESC_FLAG_DMA_FAIL |
RTL8180_RX_DESC_FLAG_FOF |
RTL8180_RX_DESC_FLAG_RX_ERR)))
goto done;
else {
u32 flags2 = le32_to_cpu(entry->flags2);
struct ieee80211_rx_status rx_status = {0};
struct sk_buff *new_skb = dev_alloc_skb(MAX_RX_SIZE);
if (unlikely(!new_skb))
goto done;
pci_unmap_single(priv->pdev,
*((dma_addr_t *)skb->cb),
MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
skb_put(skb, flags & 0xFFF);
rx_status.antenna = (flags2 >> 15) & 1;
/* TODO: improve signal/rssi reporting */
rx_status.signal = flags2 & 0xFF;
rx_status.ssi = (flags2 >> 8) & 0x7F;
/* XXX: is this correct? */
rx_status.rate_idx = (flags >> 20) & 0xF;
rx_status.freq = dev->conf.channel->center_freq;
rx_status.band = dev->conf.channel->band;
rx_status.mactime = le64_to_cpu(entry->tsft);
rx_status.flag |= RX_FLAG_TSFT;
if (flags & RTL8180_RX_DESC_FLAG_CRC32_ERR)
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
ieee80211_rx_irqsafe(dev, skb, &rx_status);
skb = new_skb;
priv->rx_buf[priv->rx_idx] = skb;
*((dma_addr_t *) skb->cb) =
pci_map_single(priv->pdev, skb_tail_pointer(skb),
MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
}
done:
entry->rx_buf = cpu_to_le32(*((dma_addr_t *)skb->cb));
entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN |
MAX_RX_SIZE);
if (priv->rx_idx == 31)
entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR);
priv->rx_idx = (priv->rx_idx + 1) % 32;
}
}
static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio)
{
struct rtl8180_priv *priv = dev->priv;
struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
while (skb_queue_len(&ring->queue)) {
struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
struct sk_buff *skb;
struct ieee80211_tx_status status;
struct ieee80211_tx_control *control;
u32 flags = le32_to_cpu(entry->flags);
if (flags & RTL8180_TX_DESC_FLAG_OWN)
return;
memset(&status, 0, sizeof(status));
ring->idx = (ring->idx + 1) % ring->entries;
skb = __skb_dequeue(&ring->queue);
pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
skb->len, PCI_DMA_TODEVICE);
control = *((struct ieee80211_tx_control **)skb->cb);
if (control)
memcpy(&status.control, control, sizeof(*control));
kfree(control);
if (!(status.control.flags & IEEE80211_TXCTL_NO_ACK)) {
if (flags & RTL8180_TX_DESC_FLAG_TX_OK)
status.flags = IEEE80211_TX_STATUS_ACK;
else
status.excessive_retries = 1;
}
status.retry_count = flags & 0xFF;
ieee80211_tx_status_irqsafe(dev, skb, &status);
if (ring->entries - skb_queue_len(&ring->queue) == 2)
ieee80211_wake_queue(dev, prio);
}
}
static irqreturn_t rtl8180_interrupt(int irq, void *dev_id)
{
struct ieee80211_hw *dev = dev_id;
struct rtl8180_priv *priv = dev->priv;
u16 reg;
spin_lock(&priv->lock);
reg = rtl818x_ioread16(priv, &priv->map->INT_STATUS);
if (unlikely(reg == 0xFFFF)) {
spin_unlock(&priv->lock);
return IRQ_HANDLED;
}
rtl818x_iowrite16(priv, &priv->map->INT_STATUS, reg);
if (reg & (RTL818X_INT_TXB_OK | RTL818X_INT_TXB_ERR))
rtl8180_handle_tx(dev, 3);
if (reg & (RTL818X_INT_TXH_OK | RTL818X_INT_TXH_ERR))
rtl8180_handle_tx(dev, 2);
if (reg & (RTL818X_INT_TXN_OK | RTL818X_INT_TXN_ERR))
rtl8180_handle_tx(dev, 1);
if (reg & (RTL818X_INT_TXL_OK | RTL818X_INT_TXL_ERR))
rtl8180_handle_tx(dev, 0);
if (reg & (RTL818X_INT_RX_OK | RTL818X_INT_RX_ERR))
rtl8180_handle_rx(dev);
spin_unlock(&priv->lock);
return IRQ_HANDLED;
}
static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
struct rtl8180_priv *priv = dev->priv;
struct rtl8180_tx_ring *ring;
struct rtl8180_tx_desc *entry;
unsigned long flags;
unsigned int idx, prio;
dma_addr_t mapping;
u32 tx_flags;
u16 plcp_len = 0;
__le16 rts_duration = 0;
prio = control->queue;
ring = &priv->tx_ring[prio];
mapping = pci_map_single(priv->pdev, skb->data,
skb->len, PCI_DMA_TODEVICE);
tx_flags = RTL8180_TX_DESC_FLAG_OWN | RTL8180_TX_DESC_FLAG_FS |
RTL8180_TX_DESC_FLAG_LS |
(control->tx_rate->hw_value << 24) |
(control->rts_cts_rate->hw_value << 19) | skb->len;
if (priv->r8185)
tx_flags |= RTL8180_TX_DESC_FLAG_DMA |
RTL8180_TX_DESC_FLAG_NO_ENC;
if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS)
tx_flags |= RTL8180_TX_DESC_FLAG_RTS;
else if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
tx_flags |= RTL8180_TX_DESC_FLAG_CTS;
*((struct ieee80211_tx_control **) skb->cb) =
kmemdup(control, sizeof(*control), GFP_ATOMIC);
if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS)
rts_duration = ieee80211_rts_duration(dev, priv->vif, skb->len,
control);
if (!priv->r8185) {
unsigned int remainder;
plcp_len = DIV_ROUND_UP(16 * (skb->len + 4),
(control->tx_rate->bitrate * 2) / 10);
remainder = (16 * (skb->len + 4)) %
((control->tx_rate->bitrate * 2) / 10);
if (remainder > 0 && remainder <= 6)
plcp_len |= 1 << 15;
}
spin_lock_irqsave(&priv->lock, flags);
idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
entry = &ring->desc[idx];
entry->rts_duration = rts_duration;
entry->plcp_len = cpu_to_le16(plcp_len);
entry->tx_buf = cpu_to_le32(mapping);
entry->frame_len = cpu_to_le32(skb->len);
entry->flags2 = control->alt_retry_rate != NULL ?
control->alt_retry_rate->bitrate << 4 : 0;
entry->retry_limit = control->retry_limit;
entry->flags = cpu_to_le32(tx_flags);
__skb_queue_tail(&ring->queue, skb);
if (ring->entries - skb_queue_len(&ring->queue) < 2)
ieee80211_stop_queue(dev, control->queue);
spin_unlock_irqrestore(&priv->lock, flags);
rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4)));
return 0;
}
void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
{
u8 reg;
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
rtl818x_iowrite8(priv, &priv->map->CONFIG3,
reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
rtl818x_iowrite8(priv, &priv->map->CONFIG3,
reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
}
static int rtl8180_init_hw(struct ieee80211_hw *dev)
{
struct rtl8180_priv *priv = dev->priv;
u16 reg;
rtl818x_iowrite8(priv, &priv->map->CMD, 0);
rtl818x_ioread8(priv, &priv->map->CMD);
msleep(10);
/* reset */
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
rtl818x_ioread8(priv, &priv->map->CMD);
reg = rtl818x_ioread8(priv, &priv->map->CMD);
reg &= (1 << 1);
reg |= RTL818X_CMD_RESET;
rtl818x_iowrite8(priv, &priv->map->CMD, RTL818X_CMD_RESET);
rtl818x_ioread8(priv, &priv->map->CMD);
msleep(200);
/* check success of reset */
if (rtl818x_ioread8(priv, &priv->map->CMD) & RTL818X_CMD_RESET) {
printk(KERN_ERR "%s: reset timeout!\n", wiphy_name(dev->wiphy));
return -ETIMEDOUT;
}
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
rtl818x_ioread8(priv, &priv->map->CMD);
msleep(200);
if (rtl818x_ioread8(priv, &priv->map->CONFIG3) & (1 << 3)) {
/* For cardbus */
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
reg |= 1 << 1;
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
reg = rtl818x_ioread16(priv, &priv->map->FEMR);
reg |= (1 << 15) | (1 << 14) | (1 << 4);
rtl818x_iowrite16(priv, &priv->map->FEMR, reg);
}
rtl818x_iowrite8(priv, &priv->map->MSR, 0);
if (!priv->r8185)
rtl8180_set_anaparam(priv, priv->anaparam);
rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
/* TODO: necessary? specs indicate not */
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg & ~(1 << 3));
if (priv->r8185) {
reg = rtl818x_ioread8(priv, &priv->map->CONFIG2);
rtl818x_iowrite8(priv, &priv->map->CONFIG2, reg | (1 << 4));
}
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
/* TODO: set CONFIG5 for calibrating AGC on rtl8180 + philips radio? */
/* TODO: turn off hw wep on rtl8180 */
rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
if (priv->r8185) {
rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
/* TODO: set ClkRun enable? necessary? */
reg = rtl818x_ioread8(priv, &priv->map->GP_ENABLE);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, reg & ~(1 << 6));
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | (1 << 2));
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
} else {
rtl818x_iowrite16(priv, &priv->map->BRSR, 0x1);
rtl818x_iowrite8(priv, &priv->map->SECURITY, 0);
rtl818x_iowrite8(priv, &priv->map->PHY_DELAY, 0x6);
rtl818x_iowrite8(priv, &priv->map->CARRIER_SENSE_COUNTER, 0x4C);
}
priv->rf->init(dev);
if (priv->r8185)
rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
return 0;
}
static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
{
struct rtl8180_priv *priv = dev->priv;
struct rtl8180_rx_desc *entry;
int i;
priv->rx_ring = pci_alloc_consistent(priv->pdev,
sizeof(*priv->rx_ring) * 32,
&priv->rx_ring_dma);
if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
printk(KERN_ERR "%s: Cannot allocate RX ring\n",
wiphy_name(dev->wiphy));
return -ENOMEM;
}
memset(priv->rx_ring, 0, sizeof(*priv->rx_ring) * 32);
priv->rx_idx = 0;
for (i = 0; i < 32; i++) {
struct sk_buff *skb = dev_alloc_skb(MAX_RX_SIZE);
dma_addr_t *mapping;
entry = &priv->rx_ring[i];
if (!skb)
return 0;
priv->rx_buf[i] = skb;
mapping = (dma_addr_t *)skb->cb;
*mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
entry->rx_buf = cpu_to_le32(*mapping);
entry->flags = cpu_to_le32(RTL8180_RX_DESC_FLAG_OWN |
MAX_RX_SIZE);
}
entry->flags |= cpu_to_le32(RTL8180_RX_DESC_FLAG_EOR);
return 0;
}
static void rtl8180_free_rx_ring(struct ieee80211_hw *dev)
{
struct rtl8180_priv *priv = dev->priv;
int i;
for (i = 0; i < 32; i++) {
struct sk_buff *skb = priv->rx_buf[i];
if (!skb)
continue;
pci_unmap_single(priv->pdev,
*((dma_addr_t *)skb->cb),
MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
kfree_skb(skb);
}
pci_free_consistent(priv->pdev, sizeof(*priv->rx_ring) * 32,
priv->rx_ring, priv->rx_ring_dma);
priv->rx_ring = NULL;
}
static int rtl8180_init_tx_ring(struct ieee80211_hw *dev,
unsigned int prio, unsigned int entries)
{
struct rtl8180_priv *priv = dev->priv;
struct rtl8180_tx_desc *ring;
dma_addr_t dma;
int i;
ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma);
if (!ring || (unsigned long)ring & 0xFF) {
printk(KERN_ERR "%s: Cannot allocate TX ring (prio = %d)\n",
wiphy_name(dev->wiphy), prio);
return -ENOMEM;
}
memset(ring, 0, sizeof(*ring)*entries);
priv->tx_ring[prio].desc = ring;
priv->tx_ring[prio].dma = dma;
priv->tx_ring[prio].idx = 0;
priv->tx_ring[prio].entries = entries;
skb_queue_head_init(&priv->tx_ring[prio].queue);
for (i = 0; i < entries; i++)
ring[i].next_tx_desc =
cpu_to_le32((u32)dma + ((i + 1) % entries) * sizeof(*ring));
return 0;
}
static void rtl8180_free_tx_ring(struct ieee80211_hw *dev, unsigned int prio)
{
struct rtl8180_priv *priv = dev->priv;
struct rtl8180_tx_ring *ring = &priv->tx_ring[prio];
while (skb_queue_len(&ring->queue)) {
struct rtl8180_tx_desc *entry = &ring->desc[ring->idx];
struct sk_buff *skb = __skb_dequeue(&ring->queue);
pci_unmap_single(priv->pdev, le32_to_cpu(entry->tx_buf),
skb->len, PCI_DMA_TODEVICE);
kfree(*((struct ieee80211_tx_control **) skb->cb));
kfree_skb(skb);
ring->idx = (ring->idx + 1) % ring->entries;
}
pci_free_consistent(priv->pdev, sizeof(*ring->desc)*ring->entries,
ring->desc, ring->dma);
ring->desc = NULL;
}
static int rtl8180_start(struct ieee80211_hw *dev)
{
struct rtl8180_priv *priv = dev->priv;
int ret, i;
u32 reg;
ret = rtl8180_init_rx_ring(dev);
if (ret)
return ret;
for (i = 0; i < 4; i++)
if ((ret = rtl8180_init_tx_ring(dev, i, 16)))
goto err_free_rings;
ret = rtl8180_init_hw(dev);
if (ret)
goto err_free_rings;
rtl818x_iowrite32(priv, &priv->map->RDSAR, priv->rx_ring_dma);
rtl818x_iowrite32(priv, &priv->map->TBDA, priv->tx_ring[3].dma);
rtl818x_iowrite32(priv, &priv->map->THPDA, priv->tx_ring[2].dma);
rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
ret = request_irq(priv->pdev->irq, &rtl8180_interrupt,
IRQF_SHARED, KBUILD_MODNAME, dev);
if (ret) {
printk(KERN_ERR "%s: failed to register IRQ handler\n",
wiphy_name(dev->wiphy));
goto err_free_rings;
}
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
rtl818x_iowrite32(priv, &priv->map->MAR[0], ~0);
rtl818x_iowrite32(priv, &priv->map->MAR[1], ~0);
reg = RTL818X_RX_CONF_ONLYERLPKT |
RTL818X_RX_CONF_RX_AUTORESETPHY |
RTL818X_RX_CONF_MGMT |
RTL818X_RX_CONF_DATA |
(7 << 8 /* MAX RX DMA */) |
RTL818X_RX_CONF_BROADCAST |
RTL818X_RX_CONF_NICMAC;
if (priv->r8185)
reg |= RTL818X_RX_CONF_CSDM1 | RTL818X_RX_CONF_CSDM2;
else {
reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE1)
? RTL818X_RX_CONF_CSDM1 : 0;
reg |= (priv->rfparam & RF_PARAM_CARRIERSENSE2)
? RTL818X_RX_CONF_CSDM2 : 0;
}
priv->rx_conf = reg;
rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
if (priv->r8185) {
reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
reg |= RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
/* disable early TX */
rtl818x_iowrite8(priv, (u8 __iomem *)priv->map + 0xec, 0x3f);
}
reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
reg |= (6 << 21 /* MAX TX DMA */) |
RTL818X_TX_CONF_NO_ICV;
if (priv->r8185)
reg &= ~RTL818X_TX_CONF_PROBE_DTS;
else
reg &= ~RTL818X_TX_CONF_HW_SEQNUM;
/* different meaning, same value on both rtl8185 and rtl8180 */
reg &= ~RTL818X_TX_CONF_SAT_HWPLCP;
rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
reg = rtl818x_ioread8(priv, &priv->map->CMD);
reg |= RTL818X_CMD_RX_ENABLE;
reg |= RTL818X_CMD_TX_ENABLE;
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
priv->mode = IEEE80211_IF_TYPE_MNTR;
return 0;
err_free_rings:
rtl8180_free_rx_ring(dev);
for (i = 0; i < 4; i++)
if (priv->tx_ring[i].desc)
rtl8180_free_tx_ring(dev, i);
return ret;
}
static void rtl8180_stop(struct ieee80211_hw *dev)
{
struct rtl8180_priv *priv = dev->priv;
u8 reg;
int i;
priv->mode = IEEE80211_IF_TYPE_INVALID;
rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
reg = rtl818x_ioread8(priv, &priv->map->CMD);
reg &= ~RTL818X_CMD_TX_ENABLE;
reg &= ~RTL818X_CMD_RX_ENABLE;
rtl818x_iowrite8(priv, &priv->map->CMD, reg);
priv->rf->stop(dev);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
free_irq(priv->pdev->irq, dev);
rtl8180_free_rx_ring(dev);
for (i = 0; i < 4; i++)
rtl8180_free_tx_ring(dev, i);
}
static int rtl8180_add_interface(struct ieee80211_hw *dev,
struct ieee80211_if_init_conf *conf)
{
struct rtl8180_priv *priv = dev->priv;
if (priv->mode != IEEE80211_IF_TYPE_MNTR)
return -EOPNOTSUPP;
switch (conf->type) {
case IEEE80211_IF_TYPE_STA:
priv->mode = conf->type;
break;
default:
return -EOPNOTSUPP;
}
priv->vif = conf->vif;
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
cpu_to_le32(*(u32 *)conf->mac_addr));
rtl818x_iowrite16(priv, (__le16 __iomem *)&priv->map->MAC[4],
cpu_to_le16(*(u16 *)(conf->mac_addr + 4)));
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
return 0;
}
static void rtl8180_remove_interface(struct ieee80211_hw *dev,
struct ieee80211_if_init_conf *conf)
{
struct rtl8180_priv *priv = dev->priv;
priv->mode = IEEE80211_IF_TYPE_MNTR;
priv->vif = NULL;
}
static int rtl8180_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
{
struct rtl8180_priv *priv = dev->priv;
priv->rf->set_chan(dev, conf);
return 0;
}
static int rtl8180_config_interface(struct ieee80211_hw *dev,
struct ieee80211_vif *vif,
struct ieee80211_if_conf *conf)
{
struct rtl8180_priv *priv = dev->priv;
int i;
for (i = 0; i < ETH_ALEN; i++)
rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
if (is_valid_ether_addr(conf->bssid))
rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
else
rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
return 0;
}
static void rtl8180_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
int mc_count, struct dev_addr_list *mclist)
{
struct rtl8180_priv *priv = dev->priv;
if (changed_flags & FIF_FCSFAIL)
priv->rx_conf ^= RTL818X_RX_CONF_FCS;
if (changed_flags & FIF_CONTROL)
priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
if (changed_flags & FIF_OTHER_BSS)
priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
if (*total_flags & FIF_ALLMULTI || mc_count > 0)
priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
else
priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
*total_flags = 0;
if (priv->rx_conf & RTL818X_RX_CONF_FCS)
*total_flags |= FIF_FCSFAIL;
if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
*total_flags |= FIF_CONTROL;
if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
*total_flags |= FIF_OTHER_BSS;
if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
*total_flags |= FIF_ALLMULTI;
rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
}
static const struct ieee80211_ops rtl8180_ops = {
.tx = rtl8180_tx,
.start = rtl8180_start,
.stop = rtl8180_stop,
.add_interface = rtl8180_add_interface,
.remove_interface = rtl8180_remove_interface,
.config = rtl8180_config,
.config_interface = rtl8180_config_interface,
.configure_filter = rtl8180_configure_filter,
};
static void rtl8180_eeprom_register_read(struct eeprom_93cx6 *eeprom)
{
struct ieee80211_hw *dev = eeprom->data;
struct rtl8180_priv *priv = dev->priv;
u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
}
static void rtl8180_eeprom_register_write(struct eeprom_93cx6 *eeprom)
{
struct ieee80211_hw *dev = eeprom->data;
struct rtl8180_priv *priv = dev->priv;
u8 reg = 2 << 6;
if (eeprom->reg_data_in)
reg |= RTL818X_EEPROM_CMD_WRITE;
if (eeprom->reg_data_out)
reg |= RTL818X_EEPROM_CMD_READ;
if (eeprom->reg_data_clock)
reg |= RTL818X_EEPROM_CMD_CK;
if (eeprom->reg_chip_select)
reg |= RTL818X_EEPROM_CMD_CS;
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
udelay(10);
}
static int __devinit rtl8180_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct ieee80211_hw *dev;
struct rtl8180_priv *priv;
unsigned long mem_addr, mem_len;
unsigned int io_addr, io_len;
int err, i;
struct eeprom_93cx6 eeprom;
const char *chip_name, *rf_name = NULL;
u32 reg;
u16 eeprom_val;
DECLARE_MAC_BUF(mac);
err = pci_enable_device(pdev);
if (err) {
printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n",
pci_name(pdev));
return err;
}
err = pci_request_regions(pdev, KBUILD_MODNAME);
if (err) {
printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n",
pci_name(pdev));
return err;
}
io_addr = pci_resource_start(pdev, 0);
io_len = pci_resource_len(pdev, 0);
mem_addr = pci_resource_start(pdev, 1);
mem_len = pci_resource_len(pdev, 1);
if (mem_len < sizeof(struct rtl818x_csr) ||
io_len < sizeof(struct rtl818x_csr)) {
printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n",
pci_name(pdev));
err = -ENOMEM;
goto err_free_reg;
}
if ((err = pci_set_dma_mask(pdev, 0xFFFFFF00ULL)) ||
(err = pci_set_consistent_dma_mask(pdev, 0xFFFFFF00ULL))) {
printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
pci_name(pdev));
goto err_free_reg;
}
pci_set_master(pdev);
dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8180_ops);
if (!dev) {
printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n",
pci_name(pdev));
err = -ENOMEM;
goto err_free_reg;
}
priv = dev->priv;
priv->pdev = pdev;
SET_IEEE80211_DEV(dev, &pdev->dev);
pci_set_drvdata(pdev, dev);
priv->map = pci_iomap(pdev, 1, mem_len);
if (!priv->map)
priv->map = pci_iomap(pdev, 0, io_len);
if (!priv->map) {
printk(KERN_ERR "%s (rtl8180): Cannot map device memory\n",
pci_name(pdev));
goto err_free_dev;
}
BUILD_BUG_ON(sizeof(priv->channels) != sizeof(rtl818x_channels));
BUILD_BUG_ON(sizeof(priv->rates) != sizeof(rtl818x_rates));
memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
priv->band.band = IEEE80211_BAND_2GHZ;
priv->band.channels = priv->channels;
priv->band.n_channels = ARRAY_SIZE(rtl818x_channels);
priv->band.bitrates = priv->rates;
priv->band.n_bitrates = 4;
dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_RX_INCLUDES_FCS;
dev->queues = 1;
dev->max_rssi = 65;
reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
reg &= RTL818X_TX_CONF_HWVER_MASK;
switch (reg) {
case RTL818X_TX_CONF_R8180_ABCD:
chip_name = "RTL8180";
break;
case RTL818X_TX_CONF_R8180_F:
chip_name = "RTL8180vF";
break;
case RTL818X_TX_CONF_R8185_ABC:
chip_name = "RTL8185";
break;
case RTL818X_TX_CONF_R8185_D:
chip_name = "RTL8185vD";
break;
default:
printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
pci_name(pdev), reg >> 25);
goto err_iounmap;
}
priv->r8185 = reg & RTL818X_TX_CONF_R8185_ABC;
if (priv->r8185) {
priv->band.n_bitrates = ARRAY_SIZE(rtl818x_rates);
pci_try_set_mwi(pdev);
}
eeprom.data = dev;
eeprom.register_read = rtl8180_eeprom_register_read;
eeprom.register_write = rtl8180_eeprom_register_write;
if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
eeprom.width = PCI_EEPROM_WIDTH_93C66;
else
eeprom.width = PCI_EEPROM_WIDTH_93C46;
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_PROGRAM);
rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
udelay(10);
eeprom_93cx6_read(&eeprom, 0x06, &eeprom_val);
eeprom_val &= 0xFF;
switch (eeprom_val) {
case 1: rf_name = "Intersil";
break;
case 2: rf_name = "RFMD";
break;
case 3: priv->rf = &sa2400_rf_ops;
break;
case 4: priv->rf = &max2820_rf_ops;
break;
case 5: priv->rf = &grf5101_rf_ops;
break;
case 9: priv->rf = rtl8180_detect_rf(dev);
break;
case 10:
rf_name = "RTL8255";
break;
default:
printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
pci_name(pdev), eeprom_val);
goto err_iounmap;
}
if (!priv->rf) {
printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n",
pci_name(pdev), rf_name);
goto err_iounmap;
}
eeprom_93cx6_read(&eeprom, 0x17, &eeprom_val);
priv->csthreshold = eeprom_val >> 8;
if (!priv->r8185) {
__le32 anaparam;
eeprom_93cx6_multiread(&eeprom, 0xD, (__le16 *)&anaparam, 2);
priv->anaparam = le32_to_cpu(anaparam);
eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
}
eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)dev->wiphy->perm_addr, 3);
if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
" randomly generated MAC addr\n", pci_name(pdev));
random_ether_addr(dev->wiphy->perm_addr);
}
/* CCK TX power */
for (i = 0; i < 14; i += 2) {
u16 txpwr;
eeprom_93cx6_read(&eeprom, 0x10 + (i >> 1), &txpwr);
priv->channels[i].hw_value = txpwr & 0xFF;
priv->channels[i + 1].hw_value = txpwr >> 8;
}
/* OFDM TX power */
if (priv->r8185) {
for (i = 0; i < 14; i += 2) {
u16 txpwr;
eeprom_93cx6_read(&eeprom, 0x20 + (i >> 1), &txpwr);
priv->channels[i].hw_value |= (txpwr & 0xFF) << 8;
priv->channels[i + 1].hw_value |= txpwr & 0xFF00;
}
}
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
spin_lock_init(&priv->lock);
err = ieee80211_register_hw(dev);
if (err) {
printk(KERN_ERR "%s (rtl8180): Cannot register device\n",
pci_name(pdev));
goto err_iounmap;
}
printk(KERN_INFO "%s: hwaddr %s, %s + %s\n",
wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
chip_name, priv->rf->name);
return 0;
err_iounmap:
iounmap(priv->map);
err_free_dev:
pci_set_drvdata(pdev, NULL);
ieee80211_free_hw(dev);
err_free_reg:
pci_release_regions(pdev);
pci_disable_device(pdev);
return err;
}
static void __devexit rtl8180_remove(struct pci_dev *pdev)
{
struct ieee80211_hw *dev = pci_get_drvdata(pdev);
struct rtl8180_priv *priv;
if (!dev)
return;
ieee80211_unregister_hw(dev);
priv = dev->priv;
pci_iounmap(pdev, priv->map);
pci_release_regions(pdev);
pci_disable_device(pdev);
ieee80211_free_hw(dev);
}
#ifdef CONFIG_PM
static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
{
pci_save_state(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
static int rtl8180_resume(struct pci_dev *pdev)
{
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
return 0;
}
#endif /* CONFIG_PM */
static struct pci_driver rtl8180_driver = {
.name = KBUILD_MODNAME,
.id_table = rtl8180_table,
.probe = rtl8180_probe,
.remove = __devexit_p(rtl8180_remove),
#ifdef CONFIG_PM
.suspend = rtl8180_suspend,
.resume = rtl8180_resume,
#endif /* CONFIG_PM */
};
static int __init rtl8180_init(void)
{
return pci_register_driver(&rtl8180_driver);
}
static void __exit rtl8180_exit(void)
{
pci_unregister_driver(&rtl8180_driver);
}
module_init(rtl8180_init);
module_exit(rtl8180_exit);