mfd: Use uppercase only for asic3 macros and defines
Let's be consistent and use uppercase only, for both macro and defines.
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 1924eb0..9931581 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -55,8 +55,8 @@
/* IRQs */
#define MAX_ASIC_ISR_LOOPS 20
-#define ASIC3_GPIO_Base_INCR \
- (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base)
+#define ASIC3_GPIO_BASE_INCR \
+ (ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE)
static void asic3_irq_flip_edge(struct asic3 *asic,
u32 base, int bit)
@@ -66,10 +66,10 @@
spin_lock_irqsave(&asic->lock, flags);
edge = asic3_read_register(asic,
- base + ASIC3_GPIO_EdgeTrigger);
+ base + ASIC3_GPIO_EDGE_TRIGGER);
edge ^= bit;
asic3_write_register(asic,
- base + ASIC3_GPIO_EdgeTrigger, edge);
+ base + ASIC3_GPIO_EDGE_TRIGGER, edge);
spin_unlock_irqrestore(&asic->lock, flags);
}
@@ -89,7 +89,7 @@
spin_lock_irqsave(&asic->lock, flags);
status = asic3_read_register(asic,
- ASIC3_OFFSET(INTR, PIntStat));
+ ASIC3_OFFSET(INTR, P_INT_STAT));
spin_unlock_irqrestore(&asic->lock, flags);
/* Check all ten register bits */
@@ -101,17 +101,17 @@
if (status & (1 << bank)) {
unsigned long base, istat;
- base = ASIC3_GPIO_A_Base
- + bank * ASIC3_GPIO_Base_INCR;
+ base = ASIC3_GPIO_A_BASE
+ + bank * ASIC3_GPIO_BASE_INCR;
spin_lock_irqsave(&asic->lock, flags);
istat = asic3_read_register(asic,
base +
- ASIC3_GPIO_IntStatus);
+ ASIC3_GPIO_INT_STATUS);
/* Clearing IntStatus */
asic3_write_register(asic,
base +
- ASIC3_GPIO_IntStatus, 0);
+ ASIC3_GPIO_INT_STATUS, 0);
spin_unlock_irqrestore(&asic->lock, flags);
for (i = 0; i < ASIC3_GPIOS_PER_BANK; i++) {
@@ -154,7 +154,7 @@
n = (irq - asic->irq_base) >> 4;
- return (n * (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base));
+ return (n * (ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE));
}
static inline int asic3_irq_to_index(struct asic3 *asic, int irq)
@@ -172,9 +172,9 @@
index = asic3_irq_to_index(asic, irq);
spin_lock_irqsave(&asic->lock, flags);
- val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask);
+ val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK);
val |= 1 << index;
- asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val);
+ asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val);
spin_unlock_irqrestore(&asic->lock, flags);
}
@@ -186,15 +186,15 @@
spin_lock_irqsave(&asic->lock, flags);
regval = asic3_read_register(asic,
- ASIC3_INTR_Base +
- ASIC3_INTR_IntMask);
+ ASIC3_INTR_BASE +
+ ASIC3_INTR_INT_MASK);
regval &= ~(ASIC3_INTMASK_MASK0 <<
(irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
asic3_write_register(asic,
- ASIC3_INTR_Base +
- ASIC3_INTR_IntMask,
+ ASIC3_INTR_BASE +
+ ASIC3_INTR_INT_MASK,
regval);
spin_unlock_irqrestore(&asic->lock, flags);
}
@@ -209,9 +209,9 @@
index = asic3_irq_to_index(asic, irq);
spin_lock_irqsave(&asic->lock, flags);
- val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask);
+ val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK);
val &= ~(1 << index);
- asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val);
+ asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val);
spin_unlock_irqrestore(&asic->lock, flags);
}
@@ -223,15 +223,15 @@
spin_lock_irqsave(&asic->lock, flags);
regval = asic3_read_register(asic,
- ASIC3_INTR_Base +
- ASIC3_INTR_IntMask);
+ ASIC3_INTR_BASE +
+ ASIC3_INTR_INT_MASK);
regval |= (ASIC3_INTMASK_MASK0 <<
(irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
asic3_write_register(asic,
- ASIC3_INTR_Base +
- ASIC3_INTR_IntMask,
+ ASIC3_INTR_BASE +
+ ASIC3_INTR_INT_MASK,
regval);
spin_unlock_irqrestore(&asic->lock, flags);
}
@@ -249,11 +249,11 @@
spin_lock_irqsave(&asic->lock, flags);
level = asic3_read_register(asic,
- bank + ASIC3_GPIO_LevelTrigger);
+ bank + ASIC3_GPIO_LEVEL_TRIGGER);
edge = asic3_read_register(asic,
- bank + ASIC3_GPIO_EdgeTrigger);
+ bank + ASIC3_GPIO_EDGE_TRIGGER);
trigger = asic3_read_register(asic,
- bank + ASIC3_GPIO_TriggerType);
+ bank + ASIC3_GPIO_TRIGGER_TYPE);
asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit;
if (type == IRQT_RISING) {
@@ -283,11 +283,11 @@
*/
dev_notice(asic->dev, "irq type not changed\n");
}
- asic3_write_register(asic, bank + ASIC3_GPIO_LevelTrigger,
+ asic3_write_register(asic, bank + ASIC3_GPIO_LEVEL_TRIGGER,
level);
- asic3_write_register(asic, bank + ASIC3_GPIO_EdgeTrigger,
+ asic3_write_register(asic, bank + ASIC3_GPIO_EDGE_TRIGGER,
edge);
- asic3_write_register(asic, bank + ASIC3_GPIO_TriggerType,
+ asic3_write_register(asic, bank + ASIC3_GPIO_TRIGGER_TYPE,
trigger);
spin_unlock_irqrestore(&asic->lock, flags);
return 0;
@@ -336,7 +336,7 @@
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- asic3_write_register(asic, ASIC3_OFFSET(INTR, IntMask),
+ asic3_write_register(asic, ASIC3_OFFSET(INTR, INT_MASK),
ASIC3_INTMASK_GINTMASK);
set_irq_chained_handler(asic->irq_nr, asic3_irq_demux);
@@ -374,7 +374,7 @@
asic = container_of(chip, struct asic3, gpio);
gpio_base = ASIC3_GPIO_TO_BASE(offset);
- if (gpio_base > ASIC3_GPIO_D_Base) {
+ if (gpio_base > ASIC3_GPIO_D_BASE) {
dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
gpio_base, offset);
return -EINVAL;
@@ -382,7 +382,7 @@
spin_lock_irqsave(&asic->lock, flags);
- out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_Direction);
+ out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_DIRECTION);
/* Input is 0, Output is 1 */
if (out)
@@ -390,7 +390,7 @@
else
out_reg &= ~mask;
- asic3_write_register(asic, gpio_base + ASIC3_GPIO_Direction, out_reg);
+ asic3_write_register(asic, gpio_base + ASIC3_GPIO_DIRECTION, out_reg);
spin_unlock_irqrestore(&asic->lock, flags);
@@ -420,13 +420,13 @@
asic = container_of(chip, struct asic3, gpio);
gpio_base = ASIC3_GPIO_TO_BASE(offset);
- if (gpio_base > ASIC3_GPIO_D_Base) {
+ if (gpio_base > ASIC3_GPIO_D_BASE) {
dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
gpio_base, offset);
return -EINVAL;
}
- return asic3_read_register(asic, gpio_base + ASIC3_GPIO_Status) & mask;
+ return asic3_read_register(asic, gpio_base + ASIC3_GPIO_STATUS) & mask;
}
static void asic3_gpio_set(struct gpio_chip *chip,
@@ -440,7 +440,7 @@
asic = container_of(chip, struct asic3, gpio);
gpio_base = ASIC3_GPIO_TO_BASE(offset);
- if (gpio_base > ASIC3_GPIO_D_Base) {
+ if (gpio_base > ASIC3_GPIO_D_BASE) {
dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n",
gpio_base, offset);
return;
@@ -450,14 +450,14 @@
spin_lock_irqsave(&asic->lock, flags);
- out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_Out);
+ out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_OUT);
if (value)
out_reg |= mask;
else
out_reg &= ~mask;
- asic3_write_register(asic, gpio_base + ASIC3_GPIO_Out, out_reg);
+ asic3_write_register(asic, gpio_base + ASIC3_GPIO_OUT, out_reg);
spin_unlock_irqrestore(&asic->lock, flags);
@@ -478,10 +478,10 @@
memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS);
/* Enable all GPIOs */
- asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, Mask), 0xffff);
- asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, Mask), 0xffff);
- asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, Mask), 0xffff);
- asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, Mask), 0xffff);
+ asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff);
+ asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, MASK), 0xffff);
+ asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, MASK), 0xffff);
+ asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, MASK), 0xffff);
for (i = 0; i < num; i++) {
u8 alt, pin, dir, init, bank_num, bit_num;
@@ -503,14 +503,14 @@
for (i = 0; i < ASIC3_NUM_GPIO_BANKS; i++) {
asic3_write_register(asic,
ASIC3_BANK_TO_BASE(i) +
- ASIC3_GPIO_Direction,
+ ASIC3_GPIO_DIRECTION,
dir_reg[i]);
asic3_write_register(asic,
- ASIC3_BANK_TO_BASE(i) + ASIC3_GPIO_Out,
+ ASIC3_BANK_TO_BASE(i) + ASIC3_GPIO_OUT,
out_reg[i]);
asic3_write_register(asic,
ASIC3_BANK_TO_BASE(i) +
- ASIC3_GPIO_AltFunction,
+ ASIC3_GPIO_ALT_FUNCTION,
alt_reg[i]);
}