iwlegacy: s/TABLE/TBL/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
diff --git a/drivers/net/wireless/iwlegacy/iwl-3945-fh.h b/drivers/net/wireless/iwlegacy/iwl-3945-fh.h
index b98cabb..aa44a90 100644
--- a/drivers/net/wireless/iwlegacy/iwl-3945-fh.h
+++ b/drivers/net/wireless/iwlegacy/iwl-3945-fh.h
@@ -74,25 +74,25 @@
#define FH39_MEM_LOWER_BOUND (0x0800)
#define FH39_MEM_UPPER_BOUND (0x1000)
-#define FH39_CBCC_TABLE (FH39_MEM_LOWER_BOUND + 0x140)
-#define FH39_TFDB_TABLE (FH39_MEM_LOWER_BOUND + 0x180)
-#define FH39_RCSR_TABLE (FH39_MEM_LOWER_BOUND + 0x400)
-#define FH39_RSSR_TABLE (FH39_MEM_LOWER_BOUND + 0x4c0)
-#define FH39_TCSR_TABLE (FH39_MEM_LOWER_BOUND + 0x500)
-#define FH39_TSSR_TABLE (FH39_MEM_LOWER_BOUND + 0x680)
+#define FH39_CBCC_TBL (FH39_MEM_LOWER_BOUND + 0x140)
+#define FH39_TFDB_TBL (FH39_MEM_LOWER_BOUND + 0x180)
+#define FH39_RCSR_TBL (FH39_MEM_LOWER_BOUND + 0x400)
+#define FH39_RSSR_TBL (FH39_MEM_LOWER_BOUND + 0x4c0)
+#define FH39_TCSR_TBL (FH39_MEM_LOWER_BOUND + 0x500)
+#define FH39_TSSR_TBL (FH39_MEM_LOWER_BOUND + 0x680)
/* TFDB (Transmit Frame Buffer Descriptor) */
-#define FH39_TFDB(_ch, buf) (FH39_TFDB_TABLE + \
+#define FH39_TFDB(_ch, buf) (FH39_TFDB_TBL + \
((_ch) * 2 + (buf)) * 0x28)
-#define FH39_TFDB_CHNL_BUF_CTRL_REG(_ch) (FH39_TFDB_TABLE + 0x50 * (_ch))
+#define FH39_TFDB_CHNL_BUF_CTRL_REG(_ch) (FH39_TFDB_TBL + 0x50 * (_ch))
/* CBCC channel is [0,2] */
-#define FH39_CBCC(_ch) (FH39_CBCC_TABLE + (_ch) * 0x8)
+#define FH39_CBCC(_ch) (FH39_CBCC_TBL + (_ch) * 0x8)
#define FH39_CBCC_CTRL(_ch) (FH39_CBCC(_ch) + 0x00)
#define FH39_CBCC_BASE(_ch) (FH39_CBCC(_ch) + 0x04)
/* RCSR channel is [0,2] */
-#define FH39_RCSR(_ch) (FH39_RCSR_TABLE + (_ch) * 0x40)
+#define FH39_RCSR(_ch) (FH39_RCSR_TBL + (_ch) * 0x40)
#define FH39_RCSR_CONFIG(_ch) (FH39_RCSR(_ch) + 0x00)
#define FH39_RCSR_RBD_BASE(_ch) (FH39_RCSR(_ch) + 0x04)
#define FH39_RCSR_WPTR(_ch) (FH39_RCSR(_ch) + 0x20)
@@ -101,19 +101,19 @@
#define FH39_RSCSR_CHNL0_WPTR (FH39_RCSR_WPTR(0))
/* RSSR */
-#define FH39_RSSR_CTRL (FH39_RSSR_TABLE + 0x000)
-#define FH39_RSSR_STATUS (FH39_RSSR_TABLE + 0x004)
+#define FH39_RSSR_CTRL (FH39_RSSR_TBL + 0x000)
+#define FH39_RSSR_STATUS (FH39_RSSR_TBL + 0x004)
/* TCSR */
-#define FH39_TCSR(_ch) (FH39_TCSR_TABLE + (_ch) * 0x20)
+#define FH39_TCSR(_ch) (FH39_TCSR_TBL + (_ch) * 0x20)
#define FH39_TCSR_CONFIG(_ch) (FH39_TCSR(_ch) + 0x00)
#define FH39_TCSR_CREDIT(_ch) (FH39_TCSR(_ch) + 0x04)
#define FH39_TCSR_BUFF_STTS(_ch) (FH39_TCSR(_ch) + 0x08)
/* TSSR */
-#define FH39_TSSR_CBB_BASE (FH39_TSSR_TABLE + 0x000)
-#define FH39_TSSR_MSG_CONFIG (FH39_TSSR_TABLE + 0x008)
-#define FH39_TSSR_TX_STATUS (FH39_TSSR_TABLE + 0x010)
+#define FH39_TSSR_CBB_BASE (FH39_TSSR_TBL + 0x000)
+#define FH39_TSSR_MSG_CONFIG (FH39_TSSR_TBL + 0x008)
+#define FH39_TSSR_TX_STATUS (FH39_TSSR_TBL + 0x010)
/* DBM */
diff --git a/drivers/net/wireless/iwlegacy/iwl-3945.c b/drivers/net/wireless/iwlegacy/iwl-3945.c
index 96a7628..b6abf34 100644
--- a/drivers/net/wireless/iwlegacy/iwl-3945.c
+++ b/drivers/net/wireless/iwlegacy/iwl-3945.c
@@ -60,8 +60,8 @@
RATE_##rn##M_IDX, \
RATE_##pp##M_IDX, \
RATE_##np##M_IDX, \
- RATE_##r##M_IDX_TABLE, \
- RATE_##ip##M_IDX_TABLE }
+ RATE_##r##M_IDX_TBL, \
+ RATE_##ip##M_IDX_TBL }
/*
* Parameter order:
@@ -1330,7 +1330,7 @@
/* use this channel group's 6Mbit clipping/saturation pwr,
* but cap at regulatory scan power restriction (set during init
* based on eeprom channel data) for this channel. */
- power = min(ch_info->scan_power, clip_pwrs[RATE_6M_IDX_TABLE]);
+ power = min(ch_info->scan_power, clip_pwrs[RATE_6M_IDX_TBL]);
power = min(power, il->tx_power_user_lmt);
scan_power_info->requested_power = power;
@@ -1342,7 +1342,7 @@
* *idx*. */
power_idx = ch_info->power_info[rate_idx].power_table_idx
- (power - ch_info->power_info
- [RATE_6M_IDX_TABLE].requested_power) * 2;
+ [RATE_6M_IDX_TBL].requested_power) * 2;
/* store reference idx that we use when adjusting *all* scan
* powers. So we can accommodate user (all channel) or spectrum
@@ -1394,7 +1394,7 @@
}
if (!il_is_channel_valid(ch_info)) {
- D_POWER("Not calling TX_PWR_TABLE_CMD on "
+ D_POWER("Not calling TX_PWR_TBL_CMD on "
"non-Tx channel.\n");
return 0;
}
@@ -1428,7 +1428,7 @@
txpower.power[i].rate);
}
- return il_send_cmd_pdu(il, REPLY_TX_PWR_TABLE_CMD,
+ return il_send_cmd_pdu(il, REPLY_TX_PWR_TBL_CMD,
sizeof(struct il3945_txpowertable_cmd),
&txpower);
@@ -1466,7 +1466,7 @@
power_info = ch_info->power_info;
/* update OFDM Txpower settings */
- for (i = RATE_6M_IDX_TABLE; i <= RATE_54M_IDX_TABLE;
+ for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL;
i++, ++power_info) {
int delta_idx;
@@ -1490,14 +1490,14 @@
* ... all CCK power settings for a given channel are the *same*. */
if (power_changed) {
power =
- ch_info->power_info[RATE_12M_IDX_TABLE].
+ ch_info->power_info[RATE_12M_IDX_TBL].
requested_power + IL_CCK_FROM_OFDM_POWER_DIFF;
/* do all CCK rates' il3945_channel_power_info structures */
- for (i = RATE_1M_IDX_TABLE; i <= RATE_11M_IDX_TABLE; i++) {
+ for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) {
power_info->requested_power = power;
power_info->base_power_idx =
- ch_info->power_info[RATE_12M_IDX_TABLE].
+ ch_info->power_info[RATE_12M_IDX_TBL].
base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
++power_info;
}
@@ -1597,7 +1597,7 @@
for (scan_tbl_idx = 0;
scan_tbl_idx < IL_NUM_SCAN_RATES; scan_tbl_idx++) {
s32 actual_idx = (scan_tbl_idx == 0) ?
- RATE_1M_IDX_TABLE : RATE_6M_IDX_TABLE;
+ RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
actual_idx, clip_pwrs,
ch_info, a_band);
@@ -2012,19 +2012,19 @@
for (rate_idx = 0;
rate_idx < RATE_COUNT_3945; rate_idx++, clip_pwrs++) {
switch (rate_idx) {
- case RATE_36M_IDX_TABLE:
+ case RATE_36M_IDX_TBL:
if (i == 0) /* B/G */
*clip_pwrs = satur_pwr;
else /* A */
*clip_pwrs = satur_pwr - 5;
break;
- case RATE_48M_IDX_TABLE:
+ case RATE_48M_IDX_TBL:
if (i == 0)
*clip_pwrs = satur_pwr - 7;
else
*clip_pwrs = satur_pwr - 10;
break;
- case RATE_54M_IDX_TABLE:
+ case RATE_54M_IDX_TBL:
if (i == 0)
*clip_pwrs = satur_pwr - 9;
else
@@ -2139,7 +2139,7 @@
}
/* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
- pwr_info = &ch_info->power_info[RATE_12M_IDX_TABLE];
+ pwr_info = &ch_info->power_info[RATE_12M_IDX_TBL];
power = pwr_info->requested_power +
IL_CCK_FROM_OFDM_POWER_DIFF;
pwr_idx = pwr_info->power_table_idx +
@@ -2169,7 +2169,7 @@
for (scan_tbl_idx = 0;
scan_tbl_idx < IL_NUM_SCAN_RATES; scan_tbl_idx++) {
s32 actual_idx = (scan_tbl_idx == 0) ?
- RATE_1M_IDX_TABLE : RATE_6M_IDX_TABLE;
+ RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
actual_idx, clip_pwrs, ch_info, a_band);
}
@@ -2223,7 +2223,7 @@
switch (cmd_id) {
case REPLY_RXON:
return sizeof(struct il3945_rxon_cmd);
- case POWER_TABLE_CMD:
+ case POWER_TBL_CMD:
return sizeof(struct il3945_powertable_cmd);
default:
return len;
@@ -2326,17 +2326,17 @@
D_RATE("Select A mode rate scale\n");
/* If one of the following CCK rates is used,
* have it fall back to the 6M OFDM rate */
- for (i = RATE_1M_IDX_TABLE;
- i <= RATE_11M_IDX_TABLE; i++)
+ for (i = RATE_1M_IDX_TBL;
+ i <= RATE_11M_IDX_TBL; i++)
table[i].next_rate_idx =
il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
/* Don't fall back to CCK rates */
- table[RATE_12M_IDX_TABLE].next_rate_idx =
- RATE_9M_IDX_TABLE;
+ table[RATE_12M_IDX_TBL].next_rate_idx =
+ RATE_9M_IDX_TBL;
/* Don't drop out of OFDM rates */
- table[RATE_6M_IDX_TABLE].next_rate_idx =
+ table[RATE_6M_IDX_TBL].next_rate_idx =
il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
break;
@@ -2349,14 +2349,14 @@
il_is_associated(il)) {
idx = IL_FIRST_CCK_RATE;
- for (i = RATE_6M_IDX_TABLE;
- i <= RATE_54M_IDX_TABLE; i++)
+ for (i = RATE_6M_IDX_TBL;
+ i <= RATE_54M_IDX_TBL; i++)
table[i].next_rate_idx =
il3945_rates[idx].table_rs_idx;
- idx = RATE_11M_IDX_TABLE;
+ idx = RATE_11M_IDX_TBL;
/* CCK shouldn't fall back to OFDM... */
- table[idx].next_rate_idx = RATE_5M_IDX_TABLE;
+ table[idx].next_rate_idx = RATE_5M_IDX_TBL;
}
break;
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-calib.c b/drivers/net/wireless/iwlegacy/iwl-4965-calib.c
index d622b27..1d873a6 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-calib.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-calib.c
@@ -429,18 +429,18 @@
il4965_prepare_legacy_sensitivity_tbl(il, data, &cmd.table[0]);
/* Update uCode's "work" table, and copy it to DSP */
- cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE;
+ cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TBL;
/* Don't send command to uCode if nothing has changed */
if (!memcmp(&cmd.table[0], &(il->sensitivity_tbl[0]),
- sizeof(u16)*HD_TABLE_SIZE)) {
+ sizeof(u16)*HD_TBL_SIZE)) {
D_CALIB("No change in SENSITIVITY_CMD\n");
return 0;
}
/* Copy table for comparison next time */
memcpy(&(il->sensitivity_tbl[0]), &(cmd.table[0]),
- sizeof(u16)*HD_TABLE_SIZE);
+ sizeof(u16)*HD_TBL_SIZE);
return il_send_cmd(il, &cmd_out);
}
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-rs.c b/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
index b8f8064..4a54311 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-rs.c
@@ -1001,11 +1001,11 @@
D_RATE("we are staying in the same table\n");
lq_sta->stay_in_tbl = 1; /* only place this gets set */
if (is_legacy) {
- lq_sta->table_count_limit = IL_LEGACY_TABLE_COUNT;
+ lq_sta->table_count_limit = IL_LEGACY_TBL_COUNT;
lq_sta->max_failure_limit = IL_LEGACY_FAILURE_LIMIT;
lq_sta->max_success_limit = IL_LEGACY_SUCCESS_LIMIT;
} else {
- lq_sta->table_count_limit = IL_NONE_LEGACY_TABLE_COUNT;
+ lq_sta->table_count_limit = IL_NONE_LEGACY_TBL_COUNT;
lq_sta->max_failure_limit = IL_NONE_LEGACY_FAILURE_LIMIT;
lq_sta->max_success_limit = IL_NONE_LEGACY_SUCCESS_LIMIT;
}
@@ -1916,7 +1916,7 @@
* continuing to use the setup that we've been trying. */
if (win->average_tpt > lq_sta->last_tpt) {
- D_RATE("LQ: SWITCHING TO NEW TABLE "
+ D_RATE("LQ: SWITCHING TO NEW TBL "
"suc=%d cur-tpt=%d old-tpt=%d\n",
win->success_ratio,
win->average_tpt,
@@ -1932,7 +1932,7 @@
/* Else poor success; go back to mode in "active" table */
} else {
- D_RATE("LQ: GOING BACK TO THE OLD TABLE "
+ D_RATE("LQ: GOING BACK TO THE OLD TBL "
"suc=%d cur-tpt=%d old-tpt=%d\n",
win->success_ratio,
win->average_tpt,
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c
index 8fd383e..bdfb3a6 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965.c
@@ -1010,7 +1010,7 @@
}
/* for each of 33 bit-rates (including 1 for CCK) */
- for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) {
+ for (i = 0; i < POWER_TBL_NUM_ENTRIES; i++) {
u8 is_mimo_rate;
union il4965_tx_power_dual_stream tx_power;
@@ -1072,7 +1072,7 @@
power_idx += 9;
/* CCK, rate 32, reduce txpower for CCK */
- if (i == POWER_TABLE_CCK_ENTRY)
+ if (i == POWER_TBL_CCK_ENTRY)
power_idx +=
IL_TX_POWER_CCK_COMPENSATION_C_STEP;
@@ -1144,7 +1144,7 @@
goto out;
ret = il_send_cmd_pdu(il,
- REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd);
+ REPLY_TX_PWR_TBL_CMD, sizeof(cmd), &cmd);
out:
return ret;
diff --git a/drivers/net/wireless/iwlegacy/iwl-commands.h b/drivers/net/wireless/iwlegacy/iwl-commands.h
index 408391295..e6688b1 100644
--- a/drivers/net/wireless/iwlegacy/iwl-commands.h
+++ b/drivers/net/wireless/iwlegacy/iwl-commands.h
@@ -114,7 +114,7 @@
SPECTRUM_MEASURE_NOTIFICATION = 0x75,
/* Power Management */
- POWER_TABLE_CMD = 0x77,
+ POWER_TBL_CMD = 0x77,
PM_SLEEP_NOTIFICATION = 0x7A,
PM_DEBUG_STATISTIC_NOTIFIC = 0x7B,
@@ -130,7 +130,7 @@
REPLY_TX_BEACON = 0x91,
/* Miscellaneous commands */
- REPLY_TX_PWR_TABLE_CMD = 0x97,
+ REPLY_TX_PWR_TBL_CMD = 0x97,
/* Bluetooth device coexistence config command */
REPLY_BT_CONFIG = 0x9b,
@@ -214,7 +214,7 @@
/**
* struct il3945_tx_power
*
- * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_SCAN_CMD, REPLY_CHANNEL_SWITCH
+ * Used in REPLY_TX_PWR_TBL_CMD, REPLY_SCAN_CMD, REPLY_CHANNEL_SWITCH
*
* Each entry contains two values:
* 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained
@@ -233,7 +233,7 @@
/**
* struct il3945_power_per_rate
*
- * Used in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
+ * Used in REPLY_TX_PWR_TBL_CMD, REPLY_CHANNEL_SWITCH
*/
struct il3945_power_per_rate {
u8 rate; /* plcp */
@@ -326,9 +326,9 @@
#define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | RATE_MCS_ANT_C_MSK)
#define RATE_ANT_NUM 3
-#define POWER_TABLE_NUM_ENTRIES 33
-#define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32
-#define POWER_TABLE_CCK_ENTRY 32
+#define POWER_TBL_NUM_ENTRIES 33
+#define POWER_TBL_NUM_HT_OFDM_ENTRIES 32
+#define POWER_TBL_CCK_ENTRY 32
#define IL_PWR_NUM_HT_OFDM_ENTRIES 24
#define IL_PWR_CCK_ENTRIES 2
@@ -336,7 +336,7 @@
/**
* union il4965_tx_power_dual_stream
*
- * Host format used for REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
+ * Host format used for REPLY_TX_PWR_TBL_CMD, REPLY_CHANNEL_SWITCH
* Use __le32 version (struct tx_power_dual_stream) when building command.
*
* Driver provides radio gain and DSP attenuation settings to device in pairs,
@@ -360,7 +360,7 @@
/**
* struct tx_power_dual_stream
*
- * Table entries in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
+ * Table entries in REPLY_TX_PWR_TBL_CMD, REPLY_CHANNEL_SWITCH
*
* Same format as il_tx_power_dual_stream, but __le32
*/
@@ -371,10 +371,10 @@
/**
* struct il4965_tx_power_db
*
- * Entire table within REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
+ * Entire table within REPLY_TX_PWR_TBL_CMD, REPLY_CHANNEL_SWITCH
*/
struct il4965_tx_power_db {
- struct tx_power_dual_stream power_tbl[POWER_TABLE_NUM_ENTRIES];
+ struct tx_power_dual_stream power_tbl[POWER_TBL_NUM_ENTRIES];
} __packed;
/******************************************************************************
@@ -653,7 +653,7 @@
* channel.
*
* NOTE: All RXONs wipe clean the internal txpower table. Driver must
- * issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10),
+ * issue a new REPLY_TX_PWR_TBL_CMD after each REPLY_RXON (0x10),
* regardless of whether RXON_FILTER_ASSOC_MSK is set.
*/
@@ -1067,7 +1067,7 @@
#define ADD_STA_SUCCESS_MSK 0x1
-#define ADD_STA_NO_ROOM_IN_TABLE 0x2
+#define ADD_STA_NO_ROOM_IN_TBL 0x2
#define ADD_STA_NO_BLOCK_ACK_RESOURCE 0x4
#define ADD_STA_MODIFY_NON_EXIST_STA 0x8
/*
@@ -1271,7 +1271,7 @@
* command, as set up by the REPLY_RATE_SCALE (for 3945) or
* REPLY_TX_LINK_QUALITY_CMD (4965).
*
- * Driver sets up transmit power for various rates via REPLY_TX_PWR_TABLE_CMD.
+ * Driver sets up transmit power for various rates via REPLY_TX_PWR_TBL_CMD.
* This command must be executed after every RXON command, before Tx can occur.
*****************************************************************************/
@@ -1754,7 +1754,7 @@
} __packed;
/*
- * REPLY_TX_PWR_TABLE_CMD = 0x97 (command, has simple generic response)
+ * REPLY_TX_PWR_TBL_CMD = 0x97 (command, has simple generic response)
*
* See details under "TXPOWER" in iwl-4965-hw.h.
*/
@@ -1909,7 +1909,7 @@
* procedures are possible, and may work better for particular environments.
*
*
- * FILLING THE RATE TABLE
+ * FILLING THE RATE TBL
*
* Given a particular initial rate and mode, as determined by the rate
* scaling algorithm described below, the Linux driver uses the following
@@ -2263,7 +2263,7 @@
* struct il_powertable_cmd - Power Table Command
* @flags: See below:
*
- * POWER_TABLE_CMD = 0x77 (command, has simple generic response)
+ * POWER_TBL_CMD = 0x77 (command, has simple generic response)
*
* PM allow:
* bit 0 - '0' Driver not allow power management
@@ -2290,7 +2290,7 @@
* '10' force xtal sleep
* '11' Illegal set
*
- * NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then
+ * NOTE: if sleep_interval[SLEEP_INTRVL_TBL_SIZE-1] > DTIM period then
* ucode assume sleep over DTIM is allowed and we don't need to wake up
* for every DTIM.
*/
@@ -3219,7 +3219,7 @@
/*
* Table entries in SENSITIVITY_CMD (struct il_sensitivity_cmd)
*/
-#define HD_TABLE_SIZE (11) /* number of entries */
+#define HD_TBL_SIZE (11) /* number of entries */
#define HD_MIN_ENERGY_CCK_DET_IDX (0) /* table idxes */
#define HD_MIN_ENERGY_OFDM_DET_IDX (1)
#define HD_AUTO_CORR32_X1_TH_ADD_MIN_IDX (2)
@@ -3233,8 +3233,8 @@
#define HD_OFDM_ENERGY_TH_IN_IDX (10)
/* Control field in struct il_sensitivity_cmd */
-#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE cpu_to_le16(0)
-#define SENSITIVITY_CMD_CONTROL_WORK_TABLE cpu_to_le16(1)
+#define SENSITIVITY_CMD_CONTROL_DEFAULT_TBL cpu_to_le16(0)
+#define SENSITIVITY_CMD_CONTROL_WORK_TBL cpu_to_le16(1)
/**
* struct il_sensitivity_cmd
@@ -3245,7 +3245,7 @@
*/
struct il_sensitivity_cmd {
__le16 control; /* always use "1" */
- __le16 table[HD_TABLE_SIZE]; /* use HD_* as idx */
+ __le16 table[HD_TBL_SIZE]; /* use HD_* as idx */
} __packed;
diff --git a/drivers/net/wireless/iwlegacy/iwl-csr.h b/drivers/net/wireless/iwlegacy/iwl-csr.h
index 34edec3..4db0429 100644
--- a/drivers/net/wireless/iwlegacy/iwl-csr.h
+++ b/drivers/net/wireless/iwlegacy/iwl-csr.h
@@ -357,7 +357,7 @@
/* HPET MEM debug */
#define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000)
-/* DRAM INT TABLE */
+/* DRAM INT TBL */
#define CSR_DRAM_INT_TBL_ENABLE (1 << 31)
#define CSR_DRAM_INIT_TBL_WRAP_CHECK (1 << 27)
diff --git a/drivers/net/wireless/iwlegacy/iwl-dev.h b/drivers/net/wireless/iwlegacy/iwl-dev.h
index 2555f9f..7c86d19 100644
--- a/drivers/net/wireless/iwlegacy/iwl-dev.h
+++ b/drivers/net/wireless/iwlegacy/iwl-dev.h
@@ -1060,7 +1060,7 @@
u8 start_calib;
struct il_sensitivity_data sensitivity_data;
struct il_chain_noise_data chain_noise_data;
- __le16 sensitivity_tbl[HD_TABLE_SIZE];
+ __le16 sensitivity_tbl[HD_TBL_SIZE];
struct il_ht_config current_ht_config;
diff --git a/drivers/net/wireless/iwlegacy/iwl-hcmd.c b/drivers/net/wireless/iwlegacy/iwl-hcmd.c
index e63777b..0b11f2f 100644
--- a/drivers/net/wireless/iwlegacy/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlegacy/iwl-hcmd.c
@@ -58,7 +58,7 @@
IL_CMD(CHANNEL_SWITCH_NOTIFICATION);
IL_CMD(REPLY_SPECTRUM_MEASUREMENT_CMD);
IL_CMD(SPECTRUM_MEASURE_NOTIFICATION);
- IL_CMD(POWER_TABLE_CMD);
+ IL_CMD(POWER_TBL_CMD);
IL_CMD(PM_SLEEP_NOTIFICATION);
IL_CMD(PM_DEBUG_STATISTIC_NOTIFIC);
IL_CMD(REPLY_SCAN_CMD);
@@ -68,7 +68,7 @@
IL_CMD(SCAN_COMPLETE_NOTIFICATION);
IL_CMD(BEACON_NOTIFICATION);
IL_CMD(REPLY_TX_BEACON);
- IL_CMD(REPLY_TX_PWR_TABLE_CMD);
+ IL_CMD(REPLY_TX_PWR_TBL_CMD);
IL_CMD(REPLY_BT_CONFIG);
IL_CMD(REPLY_STATISTICS_CMD);
IL_CMD(STATISTICS_NOTIFICATION);
diff --git a/drivers/net/wireless/iwlegacy/iwl-legacy-rs.h b/drivers/net/wireless/iwlegacy/iwl-legacy-rs.h
index bc09a5d..58e04cb 100644
--- a/drivers/net/wireless/iwlegacy/iwl-legacy-rs.h
+++ b/drivers/net/wireless/iwlegacy/iwl-legacy-rs.h
@@ -80,19 +80,19 @@
};
enum {
- RATE_6M_IDX_TABLE = 0,
- RATE_9M_IDX_TABLE,
- RATE_12M_IDX_TABLE,
- RATE_18M_IDX_TABLE,
- RATE_24M_IDX_TABLE,
- RATE_36M_IDX_TABLE,
- RATE_48M_IDX_TABLE,
- RATE_54M_IDX_TABLE,
- RATE_1M_IDX_TABLE,
- RATE_2M_IDX_TABLE,
- RATE_5M_IDX_TABLE,
- RATE_11M_IDX_TABLE,
- RATE_INVM_IDX_TABLE = RATE_INVM_IDX - 1,
+ RATE_6M_IDX_TBL = 0,
+ RATE_9M_IDX_TBL,
+ RATE_12M_IDX_TBL,
+ RATE_18M_IDX_TBL,
+ RATE_24M_IDX_TBL,
+ RATE_36M_IDX_TBL,
+ RATE_48M_IDX_TBL,
+ RATE_54M_IDX_TBL,
+ RATE_1M_IDX_TBL,
+ RATE_2M_IDX_TBL,
+ RATE_5M_IDX_TBL,
+ RATE_11M_IDX_TBL,
+ RATE_INVM_IDX_TBL = RATE_INVM_IDX - 1,
};
enum {
@@ -213,11 +213,11 @@
* searching for a new modulation mode */
#define IL_LEGACY_FAILURE_LIMIT 160
#define IL_LEGACY_SUCCESS_LIMIT 480
-#define IL_LEGACY_TABLE_COUNT 160
+#define IL_LEGACY_TBL_COUNT 160
#define IL_NONE_LEGACY_FAILURE_LIMIT 400
#define IL_NONE_LEGACY_SUCCESS_LIMIT 4500
-#define IL_NONE_LEGACY_TABLE_COUNT 1500
+#define IL_NONE_LEGACY_TBL_COUNT 1500
/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
#define IL_RS_GOOD_RATIO 12800 /* 100% */
diff --git a/drivers/net/wireless/iwlegacy/iwl-power.c b/drivers/net/wireless/iwlegacy/iwl-power.c
index 6c6e5e7..051623a 100644
--- a/drivers/net/wireless/iwlegacy/iwl-power.c
+++ b/drivers/net/wireless/iwlegacy/iwl-power.c
@@ -88,7 +88,7 @@
le32_to_cpu(cmd->sleep_interval[3]),
le32_to_cpu(cmd->sleep_interval[4]));
- return il_send_cmd_pdu(il, POWER_TABLE_CMD,
+ return il_send_cmd_pdu(il, POWER_TBL_CMD,
sizeof(struct il_powertable_cmd), cmd);
}
diff --git a/drivers/net/wireless/iwlegacy/iwl-prph.h b/drivers/net/wireless/iwlegacy/iwl-prph.h
index 8128c87..e34d907 100644
--- a/drivers/net/wireless/iwlegacy/iwl-prph.h
+++ b/drivers/net/wireless/iwlegacy/iwl-prph.h
@@ -189,7 +189,7 @@
* procedure.
*
* This save/restore method is mostly for autonomous power management during
- * normal operation (result of POWER_TABLE_CMD). Platform suspend/resume and
+ * normal operation (result of POWER_TBL_CMD). Platform suspend/resume and
* RFKILL should use complete restarts (with total re-initialization) of uCode,
* allowing total shutdown (including BSM memory).
*
@@ -494,7 +494,7 @@
* When queue is in Scheduler-ACK mode, frames placed in a that queue must be
* for only one combination of receiver address (RA) and traffic ID (TID), i.e.
* one QOS priority level destined for one station (for this wireless link,
- * not final destination). The SCD_TRANSLATE_TABLE area provides 16 16-bit
+ * not final destination). The SCD_TRANSLATE_TBL area provides 16 16-bit
* mappings, one for each of the 16 queues. If queue is not in Scheduler-ACK
* mode, the device ignores the mapping value.
*
diff --git a/drivers/net/wireless/iwlegacy/iwl-sta.c b/drivers/net/wireless/iwlegacy/iwl-sta.c
index a7fe9ea..ffb966b 100644
--- a/drivers/net/wireless/iwlegacy/iwl-sta.c
+++ b/drivers/net/wireless/iwlegacy/iwl-sta.c
@@ -83,7 +83,7 @@
il_sta_ucode_activate(il, sta_id);
ret = 0;
break;
- case ADD_STA_NO_ROOM_IN_TABLE:
+ case ADD_STA_NO_ROOM_IN_TBL:
IL_ERR("Adding station %d failed, no room in table.\n",
sta_id);
break;
diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c
index 9244208..41104e7 100644
--- a/drivers/net/wireless/iwlegacy/iwl3945-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c
@@ -885,7 +885,7 @@
* Rx theory of operation
*
* The host allocates 32 DMA target addresses and passes the host address
- * to the firmware at register IL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
+ * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is
* 0 to 31
*
* Rx Queue Indexes
diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c
index afdec78..043d51e 100644
--- a/drivers/net/wireless/iwlegacy/iwl4965-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c
@@ -1470,7 +1470,7 @@
"HW_ERROR_TUNE_LOCK",
"HW_ERROR_TEMPERATURE",
"ILLEGAL_CHAN_FREQ",
- "VCC_NOT_STABLE",
+ "VCC_NOT_STBL",
"FH_ERROR",
"NMI_INTERRUPT_HOST",
"NMI_INTERRUPT_ACTION_PT",