V4L/DVB (3697): More msp3400 and bttv fixes
- remove obsolete VIDIOC_S_INPUT i2c call in bttv
- translate VIDIOCSFREQ to VIDIOC_S_FREQUENCY in i2c call
- improve muting during carrier scan in msp3400
- don't start scan unless really needed.
- no longer reset chip for msp3400c/d.
- remove v4l2 check in tuner-core (radio stops after using the TV)
- add missing VIDIOC_INT_ strings in v4l2-common.c
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
index 926095c..b41ee9a 100644
--- a/drivers/media/video/msp3400-kthreads.c
+++ b/drivers/media/video/msp3400-kthreads.c
@@ -383,7 +383,7 @@
if (val > 32767)
val -= 65536;
v4l_dbg(2, msp_debug, client, "stereo detect register: %d\n", val);
- if (val > 4096) {
+ if (val > 8192) {
rxsubchans = V4L2_TUNER_SUB_STEREO;
} else if (val < -4096) {
rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
@@ -480,12 +480,14 @@
if (state->radio || MSP_MODE_EXTERN == state->mode) {
/* no carrier scan, just unmute */
v4l_dbg(1, msp_debug, client, "thread: no carrier scan\n");
+ state->scan_in_progress = 0;
msp_set_audio(client);
continue;
}
- /* put into sane state (and mute) */
- msp_reset(client);
+ /* mute audio */
+ state->scan_in_progress = 1;
+ msp_set_audio(client);
msp3400c_set_mode(client, MSP_MODE_AM_DETECT);
val1 = val2 = 0;
@@ -493,7 +495,7 @@
state->watch_stereo = 0;
state->nicam_on = 0;
- /* some time for the tuner to sync */
+ /* wait for tuner to settle down after a channel change */
if (msp_sleep(state, 200))
goto restart;
@@ -608,28 +610,26 @@
no_second:
state->second = msp3400c_carrier_detect_main[max1].cdo;
msp3400c_set_mode(client, MSP_MODE_FM_TERRA);
- state->rxsubchans = V4L2_TUNER_SUB_MONO;
break;
}
msp3400c_set_carrier(client, state->second, state->main);
- /* unmute, restore misc registers */
- msp_set_audio(client);
-
- msp_write_dsp(client, 0x13, state->acb);
+ /* unmute */
+ state->scan_in_progress = 0;
msp3400c_set_audmode(client);
+ msp_set_audio(client);
if (msp_debug)
msp3400c_print_mode(client);
/* monitor tv audio mode, the first time don't wait
so long to get a quick stereo/bilingual result */
- count = 20;
+ count = 3;
while (state->watch_stereo) {
- watch_stereo(client);
- if (msp_sleep(state, count ? 200 : 5000))
+ if (msp_sleep(state, count ? 1000 : 5000))
goto restart;
if (count) count--;
+ watch_stereo(client);
}
}
v4l_dbg(1, msp_debug, client, "thread: exit\n");
@@ -659,16 +659,14 @@
if (state->mode == MSP_MODE_EXTERN) {
/* no carrier scan needed, just unmute */
v4l_dbg(1, msp_debug, client, "thread: no carrier scan\n");
+ state->scan_in_progress = 0;
msp_set_audio(client);
continue;
}
- /* put into sane state (and mute) */
- msp_reset(client);
-
- /* some time for the tuner to sync */
- if (msp_sleep(state,200))
- goto restart;
+ /* mute audio */
+ state->scan_in_progress = 1;
+ msp_set_audio(client);
/* start autodetect. Note: autodetect is not supported for
NTSC-M and radio, hence we force the standard in those cases. */
@@ -679,6 +677,10 @@
state->watch_stereo = 0;
state->nicam_on = 0;
+ /* wait for tuner to settle down after a channel change */
+ if (msp_sleep(state, 200))
+ goto restart;
+
if (msp_debug)
v4l_dbg(2, msp_debug, client, "setting standard: %s (0x%04x)\n",
msp_standard_std_name(std), std);
@@ -708,6 +710,7 @@
state->main = msp_stdlist[i].main;
state->second = msp_stdlist[i].second;
state->std = val;
+ state->rxsubchans = V4L2_TUNER_SUB_MONO;
if (msp_amsound && !state->radio && (state->v4l2_std & V4L2_STD_SECAM) &&
(val != 0x0009)) {
@@ -729,20 +732,17 @@
else
state->mode = MSP_MODE_FM_NICAM1;
/* just turn on stereo */
- state->rxsubchans = V4L2_TUNER_SUB_STEREO;
state->nicam_on = 1;
state->watch_stereo = 1;
break;
case 0x0009:
state->mode = MSP_MODE_AM_NICAM;
- state->rxsubchans = V4L2_TUNER_SUB_MONO;
state->nicam_on = 1;
state->watch_stereo = 1;
break;
case 0x0020: /* BTSC */
/* The pre-'G' models only have BTSC-mono */
state->mode = MSP_MODE_BTSC;
- state->rxsubchans = V4L2_TUNER_SUB_MONO;
break;
case 0x0040: /* FM radio */
state->mode = MSP_MODE_FM_RADIO;
@@ -752,15 +752,12 @@
msp3400c_set_mode(client, MSP_MODE_FM_RADIO);
msp3400c_set_carrier(client, MSP_CARRIER(10.7),
MSP_CARRIER(10.7));
- /* scart routing (this doesn't belong here I think) */
- msp_set_scart(client,SCART_IN2,0);
break;
case 0x0002:
case 0x0003:
case 0x0004:
case 0x0005:
state->mode = MSP_MODE_FM_TERRA;
- state->rxsubchans = V4L2_TUNER_SUB_MONO;
state->watch_stereo = 1;
break;
}
@@ -774,20 +771,19 @@
if (state->has_i2s_conf)
msp_write_dem(client, 0x40, state->i2s_mode);
- /* unmute, restore misc registers */
- msp_set_audio(client);
-
- msp_write_dsp(client, 0x13, state->acb);
+ /* unmute */
msp3400c_set_audmode(client);
+ state->scan_in_progress = 0;
+ msp_set_audio(client);
/* monitor tv audio mode, the first time don't wait
so long to get a quick stereo/bilingual result */
- count = 20;
+ count = 3;
while (state->watch_stereo) {
- watch_stereo(client);
- if (msp_sleep(state, count ? 200 : 5000))
+ if (msp_sleep(state, count ? 1000 : 5000))
goto restart;
if (count) count--;
+ watch_stereo(client);
}
}
v4l_dbg(1, msp_debug, client, "thread: exit\n");
@@ -902,10 +898,6 @@
msp_reset(client);
- /* make sure that input/output is muted (paranoid mode) */
- /* ACB, mute DSP input, mute SCART 1 */
- msp_write_dsp(client, 0x13, 0x0f20);
-
if (state->has_i2s_conf)
msp_write_dem(client, 0x40, state->i2s_mode);