wl12xx: update BT coex configuration params
The BT coex params api have been changed.
Update it, and init coex for both sta and ap.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 30ee7d3..a7c1478 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -99,40 +99,75 @@
enum {
/*
- * PER threshold in PPM of the BT voice
+ * Configure the min and max time BT gains the antenna
+ * in WLAN / BT master basic rate
*
- * Range: 0 - 10000000
+ * Range: 0 - 255 (ms)
*/
- CONF_SG_BT_PER_THRESHOLD = 0,
+ CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
+ CONF_SG_ACL_BT_MASTER_MAX_BR,
/*
- * Number of consequent RX_ACTIVE activities to override BT voice
- * frames to ensure WLAN connection
+ * Configure the min and max time BT gains the antenna
+ * in WLAN / BT slave basic rate
*
- * Range: 0 - 100
+ * Range: 0 - 255 (ms)
*/
- CONF_SG_HV3_MAX_OVERRIDE,
+ CONF_SG_ACL_BT_SLAVE_MIN_BR,
+ CONF_SG_ACL_BT_SLAVE_MAX_BR,
/*
- * Defines the PER threshold of the BT voice
+ * Configure the min and max time BT gains the antenna
+ * in WLAN / BT master EDR
*
- * Range: 0 - 65000
+ * Range: 0 - 255 (ms)
*/
- CONF_SG_BT_NFS_SAMPLE_INTERVAL,
+ CONF_SG_ACL_BT_MASTER_MIN_EDR,
+ CONF_SG_ACL_BT_MASTER_MAX_EDR,
/*
- * Defines the load ratio of BT
+ * Configure the min and max time BT gains the antenna
+ * in WLAN / BT slave EDR
*
- * Range: 0 - 100 (%)
+ * Range: 0 - 255 (ms)
*/
- CONF_SG_BT_LOAD_RATIO,
+ CONF_SG_ACL_BT_SLAVE_MIN_EDR,
+ CONF_SG_ACL_BT_SLAVE_MAX_EDR,
/*
- * Defines whether the SG will force WLAN host to enter/exit PSM
+ * The maximum time WLAN can gain the antenna
+ * in WLAN PSM / BT master/slave BR
*
- * Range: 1 - SG can force, 0 - host handles PSM
+ * Range: 0 - 255 (ms)
*/
- CONF_SG_AUTO_PS_MODE,
+ CONF_SG_ACL_WLAN_PS_MASTER_BR,
+ CONF_SG_ACL_WLAN_PS_SLAVE_BR,
+
+ /*
+ * The maximum time WLAN can gain the antenna
+ * in WLAN PSM / BT master/slave EDR
+ *
+ * Range: 0 - 255 (ms)
+ */
+ CONF_SG_ACL_WLAN_PS_MASTER_EDR,
+ CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
+
+ /* TODO: explain these values */
+ CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
+ CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
+ CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
+ CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
+ CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
+ CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
+ CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
+ CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
+
+ CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
+ CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
+ CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
+ CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
+ CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
+ CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
/*
* Compensation percentage of probe requests when scan initiated
@@ -151,6 +186,50 @@
CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
/*
+ * Compensation percentage of WLAN active scan window if initiated
+ * during BT A2DP
+ *
+ * Range: 0 - 1000 (%)
+ */
+ CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
+
+ /*
+ * Compensation percentage of WLAN passive scan window if initiated
+ * during BT A2DP BR
+ *
+ * Range: 0 - 1000 (%)
+ */
+ CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR,
+
+ /*
+ * Compensation percentage of WLAN passive scan window if initiated
+ * during BT A2DP EDR
+ *
+ * Range: 0 - 1000 (%)
+ */
+ CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR,
+
+ /*
+ * Compensation percentage of WLAN passive scan window if initiated
+ * during BT voice
+ *
+ * Range: 0 - 1000 (%)
+ */
+ CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
+
+ /* TODO: explain these values */
+ CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
+ CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN,
+ CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN,
+
+ /*
+ * Defines whether the SG will force WLAN host to enter/exit PSM
+ *
+ * Range: 1 - SG can force, 0 - host handles PSM
+ */
+ CONF_SG_STA_FORCE_PS_IN_BT_SCO,
+
+ /*
* Defines antenna configuration (single/dual antenna)
*
* Range: 0 - single antenna, 1 - dual antenna
@@ -158,7 +237,7 @@
CONF_SG_ANTENNA_CONFIGURATION,
/*
- * The threshold (percent) of max consequtive beacon misses before
+ * The threshold (percent) of max consecutive beacon misses before
* increasing priority of beacon reception.
*
* Range: 0 - 100 (%)
@@ -166,87 +245,11 @@
CONF_SG_BEACON_MISS_PERCENT,
/*
- * The rate threshold below which receiving a data frame from the AP
- * will increase the priority of the data frame above BT traffic.
+ * Protection time of the DHCP procedure.
*
- * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54
+ * Range: 0 - 100000 (ms)
*/
- CONF_SG_RATE_ADAPT_THRESH,
-
- /*
- * Not used currently.
- *
- * Range: 0
- */
- CONF_SG_RATE_ADAPT_SNR,
-
- /*
- * Configure the min and max time BT gains the antenna
- * in WLAN PSM / BT master basic rate
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR,
- CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR,
-
- /*
- * The time after it expires no new WLAN trigger frame is trasmitted
- * in WLAN PSM / BT master basic rate
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR,
-
- /*
- * Configure the min and max time BT gains the antenna
- * in WLAN PSM / BT slave basic rate
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR,
- CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR,
-
- /*
- * The time after it expires no new WLAN trigger frame is trasmitted
- * in WLAN PSM / BT slave basic rate
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR,
-
- /*
- * Configure the min and max time BT gains the antenna
- * in WLAN PSM / BT master EDR
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR,
- CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR,
-
- /*
- * The time after it expires no new WLAN trigger frame is trasmitted
- * in WLAN PSM / BT master EDR
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR,
-
- /*
- * Configure the min and max time BT gains the antenna
- * in WLAN PSM / BT slave EDR
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR,
- CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR,
-
- /*
- * The time after it expires no new WLAN trigger frame is trasmitted
- * in WLAN PSM / BT slave EDR
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR,
+ CONF_SG_DHCP_TIME,
/*
* RX guard time before the beginning of a new BT voice frame during
@@ -273,6 +276,16 @@
*/
CONF_SG_ADAPTIVE_RXT_TXT,
+ /* TODO: explain this value */
+ CONF_SG_GENERAL_USAGE_BIT_MAP,
+
+ /*
+ * Number of consecutive BT voice frames not interrupted by WLAN
+ *
+ * Range: 0 - 100
+ */
+ CONF_SG_HV3_MAX_SERVED,
+
/*
* The used WLAN legacy service period during active BT ACL link
*
@@ -287,152 +300,35 @@
*/
CONF_SG_UPSD_TIMEOUT,
- /*
- * Configure the min and max time BT gains the antenna
- * in WLAN Active / BT master EDR
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR,
- CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR,
+ CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
+ CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
+ CONF_SG_STA_CONNECTION_PROTECTION_TIME,
- /*
- * The maximum time WLAN can gain the antenna for
- * in WLAN Active / BT master EDR
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR,
+ /* AP params */
+ CONF_AP_BEACON_MISS_TX,
+ CONF_AP_RX_WINDOW_AFTER_BEACON,
+ CONF_AP_BEACON_WINDOW_INTERVAL,
+ CONF_AP_CONNECTION_PROTECTION_TIME,
+ CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
+ CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
- /*
- * Configure the min and max time BT gains the antenna
- * in WLAN Active / BT slave EDR
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR,
- CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR,
-
- /*
- * The maximum time WLAN can gain the antenna for
- * in WLAN Active / BT slave EDR
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR,
-
- /*
- * Configure the min and max time BT gains the antenna
- * in WLAN Active / BT basic rate
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR,
- CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR,
-
- /*
- * The maximum time WLAN can gain the antenna for
- * in WLAN Active / BT basic rate
- *
- * Range: 0 - 255 (ms)
- */
- CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR,
-
- /*
- * Compensation percentage of WLAN passive scan window if initiated
- * during BT voice
- *
- * Range: 0 - 1000 (%)
- */
- CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
-
- /*
- * Compensation percentage of WLAN passive scan window if initiated
- * during BT A2DP
- *
- * Range: 0 - 1000 (%)
- */
- CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP,
-
- /*
- * Fixed time ensured for BT traffic to gain the antenna during WLAN
- * passive scan.
- *
- * Range: 0 - 1000 ms
- */
- CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME,
-
- /*
- * Fixed time ensured for WLAN traffic to gain the antenna during WLAN
- * passive scan.
- *
- * Range: 0 - 1000 ms
- */
- CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME,
-
- /*
- * Number of consequent BT voice frames not interrupted by WLAN
- *
- * Range: 0 - 100
- */
- CONF_SG_HV3_MAX_SERVED,
-
- /*
- * Protection time of the DHCP procedure.
- *
- * Range: 0 - 100000 (ms)
- */
- CONF_SG_DHCP_TIME,
-
- /*
- * Compensation percentage of WLAN active scan window if initiated
- * during BT A2DP
- *
- * Range: 0 - 1000 (%)
- */
- CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
CONF_SG_TEMP_PARAM_1,
CONF_SG_TEMP_PARAM_2,
CONF_SG_TEMP_PARAM_3,
CONF_SG_TEMP_PARAM_4,
CONF_SG_TEMP_PARAM_5,
-
- /*
- * AP beacon miss
- *
- * Range: 0 - 255
- */
- CONF_SG_AP_BEACON_MISS_TX,
-
- /*
- * AP RX window length
- *
- * Range: 0 - 50
- */
- CONF_SG_RX_WINDOW_LENGTH,
-
- /*
- * AP connection protection time
- *
- * Range: 0 - 5000
- */
- CONF_SG_AP_CONNECTION_PROTECTION_TIME,
-
CONF_SG_TEMP_PARAM_6,
CONF_SG_TEMP_PARAM_7,
CONF_SG_TEMP_PARAM_8,
CONF_SG_TEMP_PARAM_9,
CONF_SG_TEMP_PARAM_10,
- CONF_SG_STA_PARAMS_MAX = CONF_SG_TEMP_PARAM_5 + 1,
- CONF_SG_AP_PARAMS_MAX = CONF_SG_TEMP_PARAM_10 + 1,
-
+ CONF_SG_PARAMS_MAX,
CONF_SG_PARAMS_ALL = 0xff
};
struct conf_sg_settings {
- u32 sta_params[CONF_SG_STA_PARAMS_MAX];
- u32 ap_params[CONF_SG_AP_PARAMS_MAX];
+ u32 params[CONF_SG_PARAMS_MAX];
u8 state;
};
@@ -913,7 +809,7 @@
struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT];
/*
- * The number of consequtive beacons to lose, before the firmware
+ * The number of consecutive beacons to lose, before the firmware
* becomes out of synch.
*
* Range: u32
@@ -951,7 +847,7 @@
u8 rx_broadcast_in_ps;
/*
- * Consequtive PS Poll failures before sending event to driver
+ * Consecutive PS Poll failures before sending event to driver
*
* Range: u8
*/