ASoC: Convert WM8993 to use shared cache I/O code
Saves a little bit of code duplication.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c
index 61239e0..3c9336c 100644
--- a/sound/soc/codecs/wm8993.c
+++ b/sound/soc/codecs/wm8993.c
@@ -231,34 +231,6 @@
int fll_src;
};
-static unsigned int wm8993_read_hw(struct snd_soc_codec *codec, u8 reg)
-{
- struct i2c_msg xfer[2];
- u16 data;
- int ret;
- struct i2c_client *i2c = codec->control_data;
-
- /* Write register */
- xfer[0].addr = i2c->addr;
- xfer[0].flags = 0;
- xfer[0].len = 1;
- xfer[0].buf = ®
-
- /* Read data */
- xfer[1].addr = i2c->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = 2;
- xfer[1].buf = (u8 *)&data;
-
- ret = i2c_transfer(i2c->adapter, xfer, 2);
- if (ret != 2) {
- dev_err(codec->dev, "Failed to read 0x%x: %d\n", reg, ret);
- return 0;
- }
-
- return (data >> 8) | ((data & 0xff) << 8);
-}
-
static int wm8993_volatile(unsigned int reg)
{
switch (reg) {
@@ -273,48 +245,6 @@
}
}
-static unsigned int wm8993_read(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *reg_cache = codec->reg_cache;
-
- BUG_ON(reg > WM8993_MAX_REGISTER);
-
- if (wm8993_volatile(reg))
- return wm8993_read_hw(codec, reg);
- else
- return reg_cache[reg];
-}
-
-static int wm8993_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u16 *reg_cache = codec->reg_cache;
- u8 data[3];
- int ret;
-
- BUG_ON(reg > WM8993_MAX_REGISTER);
-
- /* data is
- * D15..D9 WM8993 register offset
- * D8...D0 register data
- */
- data[0] = reg;
- data[1] = value >> 8;
- data[2] = value & 0x00ff;
-
- if (!wm8993_volatile(reg))
- reg_cache[reg] = value;
-
- ret = codec->hw_write(codec->control_data, data, 3);
-
- if (ret == 3)
- return 0;
- if (ret < 0)
- return ret;
- return -EIO;
-}
-
struct _fll_div {
u16 fll_fratio;
u16 fll_outdiv;
@@ -443,9 +373,9 @@
wm8993->fll_fref = 0;
wm8993->fll_fout = 0;
- reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1);
+ reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
reg1 &= ~WM8993_FLL_ENA;
- wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
return 0;
}
@@ -454,7 +384,7 @@
if (ret != 0)
return ret;
- reg5 = wm8993_read(codec, WM8993_FLL_CONTROL_5);
+ reg5 = snd_soc_read(codec, WM8993_FLL_CONTROL_5);
reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
switch (fll_id) {
@@ -476,33 +406,33 @@
/* Any FLL configuration change requires that the FLL be
* disabled first. */
- reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1);
+ reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1);
reg1 &= ~WM8993_FLL_ENA;
- wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
/* Apply the configuration */
if (fll_div.k)
reg1 |= WM8993_FLL_FRAC_MASK;
else
reg1 &= ~WM8993_FLL_FRAC_MASK;
- wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1);
- wm8993_write(codec, WM8993_FLL_CONTROL_2,
- (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
- (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
- wm8993_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_2,
+ (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
+ (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
+ snd_soc_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
- reg4 = wm8993_read(codec, WM8993_FLL_CONTROL_4);
+ reg4 = snd_soc_read(codec, WM8993_FLL_CONTROL_4);
reg4 &= ~WM8993_FLL_N_MASK;
reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
- wm8993_write(codec, WM8993_FLL_CONTROL_4, reg4);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_4, reg4);
reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
- wm8993_write(codec, WM8993_FLL_CONTROL_5, reg5);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_5, reg5);
/* Enable the FLL */
- wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
+ snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
@@ -523,7 +453,7 @@
case WM8993_SYSCLK_MCLK:
dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
- reg = wm8993_read(codec, WM8993_CLOCKING_2);
+ reg = snd_soc_read(codec, WM8993_CLOCKING_2);
reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
if (wm8993->mclk_rate > 13500000) {
reg |= WM8993_MCLK_DIV;
@@ -532,14 +462,14 @@
reg &= ~WM8993_MCLK_DIV;
wm8993->sysclk_rate = wm8993->mclk_rate;
}
- wm8993_write(codec, WM8993_CLOCKING_2, reg);
+ snd_soc_write(codec, WM8993_CLOCKING_2, reg);
break;
case WM8993_SYSCLK_FLL:
dev_dbg(codec->dev, "Using %dHz FLL clock\n",
wm8993->fll_fout);
- reg = wm8993_read(codec, WM8993_CLOCKING_2);
+ reg = snd_soc_read(codec, WM8993_CLOCKING_2);
reg |= WM8993_SYSCLK_SRC;
if (wm8993->fll_fout > 13500000) {
reg |= WM8993_MCLK_DIV;
@@ -548,7 +478,7 @@
reg &= ~WM8993_MCLK_DIV;
wm8993->sysclk_rate = wm8993->fll_fout;
}
- wm8993_write(codec, WM8993_CLOCKING_2, reg);
+ snd_soc_write(codec, WM8993_CLOCKING_2, reg);
break;
default:
@@ -1083,8 +1013,8 @@
{
struct snd_soc_codec *codec = dai->codec;
struct wm8993_priv *wm8993 = codec->private_data;
- unsigned int aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1);
- unsigned int aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4);
+ unsigned int aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
+ unsigned int aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
@@ -1167,8 +1097,8 @@
return -EINVAL;
}
- wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
- wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
+ snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
+ snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
return 0;
}
@@ -1182,16 +1112,16 @@
int ret, i, best, best_val, cur_val;
unsigned int clocking1, clocking3, aif1, aif4;
- clocking1 = wm8993_read(codec, WM8993_CLOCKING_1);
+ clocking1 = snd_soc_read(codec, WM8993_CLOCKING_1);
clocking1 &= ~WM8993_BCLK_DIV_MASK;
- clocking3 = wm8993_read(codec, WM8993_CLOCKING_3);
+ clocking3 = snd_soc_read(codec, WM8993_CLOCKING_3);
clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
- aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1);
+ aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1);
aif1 &= ~WM8993_AIF_WL_MASK;
- aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4);
+ aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4);
aif4 &= ~WM8993_LRCLK_RATE_MASK;
/* What BCLK do we need? */
@@ -1284,14 +1214,14 @@
dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
aif4 |= wm8993->bclk / wm8993->fs;
- wm8993_write(codec, WM8993_CLOCKING_1, clocking1);
- wm8993_write(codec, WM8993_CLOCKING_3, clocking3);
- wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
- wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
+ snd_soc_write(codec, WM8993_CLOCKING_1, clocking1);
+ snd_soc_write(codec, WM8993_CLOCKING_3, clocking3);
+ snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
+ snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
/* ReTune Mobile? */
if (wm8993->pdata.num_retune_configs) {
- u16 eq1 = wm8993_read(codec, WM8993_EQ1);
+ u16 eq1 = snd_soc_read(codec, WM8993_EQ1);
struct wm8993_retune_mobile_setting *s;
best = 0;
@@ -1314,7 +1244,7 @@
snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0);
for (i = 1; i < ARRAY_SIZE(s->config); i++)
- wm8993_write(codec, WM8993_EQ1 + i, s->config[i]);
+ snd_soc_write(codec, WM8993_EQ1 + i, s->config[i]);
snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1);
}
@@ -1327,14 +1257,14 @@
struct snd_soc_codec *codec = codec_dai->codec;
unsigned int reg;
- reg = wm8993_read(codec, WM8993_DAC_CTRL);
+ reg = snd_soc_read(codec, WM8993_DAC_CTRL);
if (mute)
reg |= WM8993_DAC_MUTE;
else
reg &= ~WM8993_DAC_MUTE;
- wm8993_write(codec, WM8993_DAC_CTRL, reg);
+ snd_soc_write(codec, WM8993_DAC_CTRL, reg);
return 0;
}
@@ -1586,9 +1516,7 @@
INIT_LIST_HEAD(&codec->dapm_paths);
codec->name = "WM8993";
- codec->read = wm8993_read;
- codec->write = wm8993_write;
- codec->hw_write = (hw_write_t)i2c_master_send;
+ codec->volatile_register = wm8993_volatile;
codec->reg_cache = wm8993->reg_cache;
codec->reg_cache_size = ARRAY_SIZE(wm8993->reg_cache);
codec->bias_level = SND_SOC_BIAS_OFF;
@@ -1603,20 +1531,26 @@
memcpy(wm8993->reg_cache, wm8993_reg_defaults,
sizeof(wm8993->reg_cache));
+ ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
+ if (ret != 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ goto err;
+ }
+
i2c_set_clientdata(i2c, wm8993);
codec->control_data = i2c;
wm8993_codec = codec;
codec->dev = &i2c->dev;
- val = wm8993_read_hw(codec, WM8993_SOFTWARE_RESET);
+ val = snd_soc_read(codec, WM8993_SOFTWARE_RESET);
if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) {
dev_err(codec->dev, "Invalid ID register value %x\n", val);
ret = -EINVAL;
goto err;
}
- ret = wm8993_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
+ ret = snd_soc_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
if (ret != 0)
goto err;