drivers/pcmcia/Kconfig - kernel/msm-4.9 - Gitiles

 #
 # PCMCIA bus subsystem configuration
 #
 # Right now the non-CardBus choices are not supported
 # by the integrated kernel driver.
 #

 menu "PCCARD (PCMCIA/CardBus) support"

 config PCCARD
 	tristate "PCCard (PCMCIA/CardBus) support"
 	select HOTPLUG
 	---help---
 	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
 	  computer.  These are credit-card size devices such as network cards,
 	  modems or hard drives often used with laptops computers.  There are
 	  actually two varieties of these cards: the older 16 bit PCMCIA cards
 	  and the newer 32 bit CardBus cards.

 	  To compile this driver as modules, choose M here: the
 	  module will be called pcmcia_core.

 if PCCARD

 config PCMCIA_DEBUG
 	bool "Enable PCCARD debugging"
 	help
 	  Say Y here to enable PCMCIA subsystem debugging.  You
 	  will need to choose the debugging level either via the
 	  kernel command line, or module options depending whether
 	  you build the PCMCIA as modules.

 	  The kernel command line options are:
 	    pcmcia_core.pc_debug=N
 	    ds.pc_debug=N
 	    sa11xx_core.pc_debug=N

 	  The module option is called pc_debug=N

 	  In all the above examples, N is the debugging verbosity
 	  level.

 config PCMCIA
 	tristate "16-bit PCMCIA support"
 	default y
 	---help---
 	   This option enables support for 16-bit PCMCIA cards. Most older
 	   PC-cards are such 16-bit PCMCIA cards, so unless you know you're
 	   only using 32-bit CardBus cards, say Y or M here.

 	   To use 16-bit PCMCIA cards, you will need supporting software from
 	   David Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
  	   for location).  Please also read the PCMCIA-HOWTO, available from
 	   <http://www.tldp.org/docs.html#howto>.

 	   To compile this driver as modules, choose M here: the
 	   module will be called pcmcia.

 	   If unsure, say Y.

 config PCMCIA_LOAD_CIS
 	bool "Load CIS updates from userspace (EXPERIMENTAL)"
 	depends on PCMCIA && EXPERIMENTAL
 	select FW_LOADER
 	default y
 	help
 	  Some PCMCIA cards require an updated Card Information Structure (CIS)
 	  to be loaded from userspace to work correctly. If you say Y here,
 	  and your userspace is arranged correctly, this will be loaded
 	  automatically using the in-kernel firmware loader and the hotplug
 	  subsystem, instead of relying on cardmgr from pcmcia-cs to do so.

 	  If unsure, say Y.

 config CARDBUS
 	bool "32-bit CardBus support"
 	depends on PCI
 	default y
 	---help---
 	  CardBus is a bus mastering architecture for PC-cards, which allows
 	  for 32 bit PC-cards (the original PCMCIA standard specifies only
 	  a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.

 	  To use 32 bit PC-cards, you also need a CardBus compatible host
 	  bridge. Virtually all modern PCMCIA bridges do this, and most of
 	  them are "yenta-compatible", so say Y or M there, too.

 	  If unsure, say Y.

 comment "PC-card bridges"

 config YENTA
 	tristate "CardBus yenta-compatible bridge support"
 	depends on PCI
 #fixme: remove dependendcy on CARDBUS
 	depends on CARDBUS
 	select PCCARD_NONSTATIC
 	---help---
 	  This option enables support for CardBus host bridges.  Virtually
 	  all modern PCMCIA bridges are CardBus compatible.  A "bridge" is
 	  the hardware inside your computer that PCMCIA cards are plugged
 	  into.

 	  To compile this driver as modules, choose M here: the
 	  module will be called yenta_socket.

 	  If unsure, say Y.

 config PD6729
 	tristate "Cirrus PD6729 compatible bridge support"
 	depends on PCMCIA && PCI
 	select PCCARD_NONSTATIC
 	help
 	  This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
 	  device, found in some older laptops and PCMCIA card readers.

 config I82092
 	tristate "i82092 compatible bridge support"
 	depends on PCMCIA && PCI
 	select PCCARD_NONSTATIC
 	help
 	  This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
 	  found in some older laptops and more commonly in evaluation boards for the
 	  chip.

 config I82365
 	tristate "i82365 compatible bridge support"
 	depends on PCMCIA && ISA
 	select PCCARD_NONSTATIC
 	help
 	  Say Y here to include support for ISA-bus PCMCIA host bridges that
 	  are register compatible with the Intel i82365.  These are found on
 	  older laptops and ISA-bus card readers for desktop systems.  A
 	  "bridge" is the hardware inside your computer that PCMCIA cards are
 	  plugged into. If unsure, say N.

 config TCIC
 	tristate "Databook TCIC host bridge support"
 	depends on PCMCIA
 	select PCCARD_NONSTATIC
 	help
 	  Say Y here to include support for the Databook TCIC family of PCMCIA
 	  host bridges. These are only found on a handful of old systems.
 	  "Bridge" is the name used for the hardware inside your computer that
 	  PCMCIA cards are plugged into. If unsure, say N.

 config HD64465_PCMCIA
 	tristate "HD64465 host bridge support"
 	depends on HD64465 && PCMCIA

 config PCMCIA_AU1X00
 	tristate "Au1x00 pcmcia support"
 	depends on SOC_AU1X00 && PCMCIA

 config PCMCIA_SA1100
 	tristate "SA1100 support"
 	depends on ARM && ARCH_SA1100 && PCMCIA
 	help
 	  Say Y here to include support for SA11x0-based PCMCIA or CF
 	  sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
 	  Xscale(R) embedded machines.

 	  This driver is also available as a module called sa1100_cs.

 config PCMCIA_SA1111
 	tristate "SA1111 support"
 	depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
 	help
 	  Say Y  here to include support for SA1111-based PCMCIA or CF
 	  sockets, found on the Jornada 720, Graphicsmaster and other
 	  StrongARM(R)/Xscale(R) embedded machines.

 	  This driver is also available as a module called sa1111_cs.

 config PCMCIA_PXA2XX
 	tristate "PXA2xx support"
 	depends on ARM && ARCH_PXA && PCMCIA
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller

 config PCMCIA_PROBE
 	bool
 	default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X

 config M32R_PCC
 	bool "M32R PCMCIA I/F"
 	depends on M32R && CHIP_M32700 && PCMCIA
 	select PCCARD_NONSTATIC
 	help
 	  Say Y here to use the M32R PCMCIA controller.

 config M32R_CFC
 	bool "M32R CF I/F Controller"
 	depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
 	select PCCARD_NONSTATIC
 	help
 	  Say Y here to use the M32R CompactFlash controller.

 config M32R_CFC_NUM
 	int "M32R CF I/F number"
 	depends on M32R_CFC
 	default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
 	help
 	  Set the number of M32R CF slots.

 config PCMCIA_VRC4171
 	tristate "NEC VRC4171 Card Controllers support"
 	depends on VRC4171 && PCMCIA

 config PCMCIA_VRC4173
 	tristate "NEC VRC4173 CARDU support"
 	depends on CPU_VR41XX && PCI && PCMCIA

 config PCCARD_NONSTATIC
 	tristate

 endif	# PCCARD

 endmenu
	#
	# PCMCIA bus subsystem configuration
	#
	# Right now the non-CardBus choices are not supported
	# by the integrated kernel driver.
	#

	menu "PCCARD (PCMCIA/CardBus) support"

	config PCCARD
	tristate "PCCard (PCMCIA/CardBus) support"
	select HOTPLUG
	---help---
	Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
	computer. These are credit-card size devices such as network cards,
	modems or hard drives often used with laptops computers. There are
	actually two varieties of these cards: the older 16 bit PCMCIA cards
	and the newer 32 bit CardBus cards.

	To compile this driver as modules, choose M here: the
	module will be called pcmcia_core.

	if PCCARD

	config PCMCIA_DEBUG
	bool "Enable PCCARD debugging"
	help
	Say Y here to enable PCMCIA subsystem debugging. You
	will need to choose the debugging level either via the
	kernel command line, or module options depending whether
	you build the PCMCIA as modules.

	The kernel command line options are:
	pcmcia_core.pc_debug=N
	ds.pc_debug=N
	sa11xx_core.pc_debug=N

	The module option is called pc_debug=N

	In all the above examples, N is the debugging verbosity
	level.

	config PCMCIA
	tristate "16-bit PCMCIA support"
	default y
	---help---
	This option enables support for 16-bit PCMCIA cards. Most older
	PC-cards are such 16-bit PCMCIA cards, so unless you know you're
	only using 32-bit CardBus cards, say Y or M here.

	To use 16-bit PCMCIA cards, you will need supporting software from
	David Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
	for location). Please also read the PCMCIA-HOWTO, available from
	<http://www.tldp.org/docs.html#howto>.

	To compile this driver as modules, choose M here: the
	module will be called pcmcia.

	If unsure, say Y.

	config PCMCIA_LOAD_CIS
	bool "Load CIS updates from userspace (EXPERIMENTAL)"
	depends on PCMCIA && EXPERIMENTAL
	select FW_LOADER
	default y
	help
	Some PCMCIA cards require an updated Card Information Structure (CIS)
	to be loaded from userspace to work correctly. If you say Y here,
	and your userspace is arranged correctly, this will be loaded
	automatically using the in-kernel firmware loader and the hotplug
	subsystem, instead of relying on cardmgr from pcmcia-cs to do so.

	If unsure, say Y.

	config CARDBUS
	bool "32-bit CardBus support"
	depends on PCI
	default y
	---help---
	CardBus is a bus mastering architecture for PC-cards, which allows
	for 32 bit PC-cards (the original PCMCIA standard specifies only
	a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.

	To use 32 bit PC-cards, you also need a CardBus compatible host
	bridge. Virtually all modern PCMCIA bridges do this, and most of
	them are "yenta-compatible", so say Y or M there, too.

	If unsure, say Y.

	comment "PC-card bridges"

	config YENTA
	tristate "CardBus yenta-compatible bridge support"
	depends on PCI
	#fixme: remove dependendcy on CARDBUS
	depends on CARDBUS
	select PCCARD_NONSTATIC
	---help---
	This option enables support for CardBus host bridges. Virtually
	all modern PCMCIA bridges are CardBus compatible. A "bridge" is
	the hardware inside your computer that PCMCIA cards are plugged
	into.

	To compile this driver as modules, choose M here: the
	module will be called yenta_socket.

	If unsure, say Y.

	config PD6729
	tristate "Cirrus PD6729 compatible bridge support"
	depends on PCMCIA && PCI
	select PCCARD_NONSTATIC
	help
	This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
	device, found in some older laptops and PCMCIA card readers.

	config I82092
	tristate "i82092 compatible bridge support"
	depends on PCMCIA && PCI
	select PCCARD_NONSTATIC
	help
	This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
	found in some older laptops and more commonly in evaluation boards for the
	chip.

	config I82365
	tristate "i82365 compatible bridge support"
	depends on PCMCIA && ISA
	select PCCARD_NONSTATIC
	help
	Say Y here to include support for ISA-bus PCMCIA host bridges that
	are register compatible with the Intel i82365. These are found on
	older laptops and ISA-bus card readers for desktop systems. A
	"bridge" is the hardware inside your computer that PCMCIA cards are
	plugged into. If unsure, say N.

	config TCIC
	tristate "Databook TCIC host bridge support"
	depends on PCMCIA
	select PCCARD_NONSTATIC
	help
	Say Y here to include support for the Databook TCIC family of PCMCIA
	host bridges. These are only found on a handful of old systems.
	"Bridge" is the name used for the hardware inside your computer that
	PCMCIA cards are plugged into. If unsure, say N.

	config HD64465_PCMCIA
	tristate "HD64465 host bridge support"
	depends on HD64465 && PCMCIA

	config PCMCIA_AU1X00
	tristate "Au1x00 pcmcia support"
	depends on SOC_AU1X00 && PCMCIA

	config PCMCIA_SA1100
	tristate "SA1100 support"
	depends on ARM && ARCH_SA1100 && PCMCIA
	help
	Say Y here to include support for SA11x0-based PCMCIA or CF
	sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
	Xscale(R) embedded machines.

	This driver is also available as a module called sa1100_cs.

	config PCMCIA_SA1111
	tristate "SA1111 support"
	depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
	help
	Say Y here to include support for SA1111-based PCMCIA or CF
	sockets, found on the Jornada 720, Graphicsmaster and other
	StrongARM(R)/Xscale(R) embedded machines.

	This driver is also available as a module called sa1111_cs.

	config PCMCIA_PXA2XX
	tristate "PXA2xx support"
	depends on ARM && ARCH_PXA && PCMCIA
	help
	Say Y here to include support for the PXA2xx PCMCIA controller

	config PCMCIA_PROBE
	bool
	default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X

	config M32R_PCC
	bool "M32R PCMCIA I/F"
	depends on M32R && CHIP_M32700 && PCMCIA
	select PCCARD_NONSTATIC
	help
	Say Y here to use the M32R PCMCIA controller.

	config M32R_CFC
	bool "M32R CF I/F Controller"
	depends on M32R && (PLAT_USRV \|\| PLAT_M32700UT \|\| PLAT_MAPPI2 \|\| PLAT_MAPPI3 \|\| PLAT_OPSPUT)
	select PCCARD_NONSTATIC
	help
	Say Y here to use the M32R CompactFlash controller.

	config M32R_CFC_NUM
	int "M32R CF I/F number"
	depends on M32R_CFC
	default "1" if PLAT_USRV \|\| PLAT_M32700UT \|\| PLAT_MAPPI2 \|\| PLAT_MAPPI3 \|\| PLAT_OPSPUT
	help
	Set the number of M32R CF slots.

	config PCMCIA_VRC4171
	tristate "NEC VRC4171 Card Controllers support"
	depends on VRC4171 && PCMCIA

	config PCMCIA_VRC4173
	tristate "NEC VRC4173 CARDU support"
	depends on CPU_VR41XX && PCI && PCMCIA

	config PCCARD_NONSTATIC
	tristate

	endif # PCCARD

	endmenu