hwmon: (it87) Pass SIO base address as parameter to superio functions

This will let us support more than one chip on different SIO addresses
with the same driver.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 8f28f9b..4840f2d 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -80,9 +80,9 @@
 
 static struct platform_device *it87_pdev;
 
-#define	REG	0x2e	/* The register to read/write */
+#define	REG_2E	0x2e	/* The register to read/write */
+
 #define	DEV	0x07	/* Register: Logical device select */
-#define	VAL	0x2f	/* The value to read/write */
 #define PME	0x04	/* The device with the fan registers in it */
 
 /* The device with the IT8718F/IT8720F VID value in it */
@@ -91,54 +91,54 @@
 #define	DEVID	0x20	/* Register: Device ID */
 #define	DEVREV	0x22	/* Register: Device Revision */
 
-static inline int superio_inb(int reg)
+static inline int superio_inb(int ioreg, int reg)
 {
-	outb(reg, REG);
-	return inb(VAL);
+	outb(reg, ioreg);
+	return inb(ioreg + 1);
 }
 
-static inline void superio_outb(int reg, int val)
+static inline void superio_outb(int ioreg, int reg, int val)
 {
-	outb(reg, REG);
-	outb(val, VAL);
+	outb(reg, ioreg);
+	outb(val, ioreg + 1);
 }
 
-static int superio_inw(int reg)
+static int superio_inw(int ioreg, int reg)
 {
 	int val;
-	outb(reg++, REG);
-	val = inb(VAL) << 8;
-	outb(reg, REG);
-	val |= inb(VAL);
+	outb(reg++, ioreg);
+	val = inb(ioreg + 1) << 8;
+	outb(reg, ioreg);
+	val |= inb(ioreg + 1);
 	return val;
 }
 
-static inline void superio_select(int ldn)
+static inline void superio_select(int ioreg, int ldn)
 {
-	outb(DEV, REG);
-	outb(ldn, VAL);
+	outb(DEV, ioreg);
+	outb(ldn, ioreg + 1);
 }
 
-static inline int superio_enter(void)
+static inline int superio_enter(int ioreg)
 {
 	/*
-	 * Try to reserve REG and REG + 1 for exclusive access.
+	 * Try to reserve ioreg and ioreg + 1 for exclusive access.
 	 */
-	if (!request_muxed_region(REG, 2, DRVNAME))
+	if (!request_muxed_region(ioreg, 2, DRVNAME))
 		return -EBUSY;
 
-	outb(0x87, REG);
-	outb(0x01, REG);
-	outb(0x55, REG);
-	outb(0x55, REG);
+	outb(0x87, ioreg);
+	outb(0x01, ioreg);
+	outb(0x55, ioreg);
+	outb(0x55, ioreg);
 	return 0;
 }
 
-static inline void superio_exit(void)
+static inline void superio_exit(int ioreg)
 {
-	outb(0x02, REG);
-	outb(0x02, VAL);
-	release_region(REG, 2);
+	outb(0x02, ioreg);
+	outb(0x02, ioreg + 1);
+	release_region(ioreg, 2);
 }
 
 /* Logical device 4 registers */
@@ -1929,20 +1929,20 @@
 };
 
 /* SuperIO detection - will change isa_address if a chip is found */
-static int __init it87_find(unsigned short *address,
-	struct it87_sio_data *sio_data)
+static int __init it87_find(int sioaddr, unsigned short *address,
+			    struct it87_sio_data *sio_data)
 {
 	int err;
 	u16 chip_type;
 	const char *board_vendor, *board_name;
 	const struct it87_devices *config;
 
-	err = superio_enter();
+	err = superio_enter(sioaddr);
 	if (err)
 		return err;
 
 	err = -ENODEV;
-	chip_type = force_id ? force_id : superio_inw(DEVID);
+	chip_type = force_id ? force_id : superio_inw(sioaddr, DEVID);
 
 	switch (chip_type) {
 	case IT8705F_DEVID:
@@ -2005,20 +2005,20 @@
 		goto exit;
 	}
 
-	superio_select(PME);
-	if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
+	superio_select(sioaddr, PME);
+	if (!(superio_inb(sioaddr, IT87_ACT_REG) & 0x01)) {
 		pr_info("Device not activated, skipping\n");
 		goto exit;
 	}
 
-	*address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
+	*address = superio_inw(sioaddr, IT87_BASE_REG) & ~(IT87_EXTENT - 1);
 	if (*address == 0) {
 		pr_info("Base address not set, skipping\n");
 		goto exit;
 	}
 
 	err = 0;
-	sio_data->revision = superio_inb(DEVREV) & 0x0f;
+	sio_data->revision = superio_inb(sioaddr, DEVREV) & 0x0f;
 	pr_info("Found IT%04x%s chip at 0x%x, revision %d\n", chip_type,
 		it87_devices[sio_data->type].suffix,
 		*address, sio_data->revision);
@@ -2047,18 +2047,19 @@
 	/* Read GPIO config and VID value from LDN 7 (GPIO) */
 	if (sio_data->type == it87) {
 		/* The IT8705F has a different LD number for GPIO */
-		superio_select(5);
-		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
+		superio_select(sioaddr, 5);
+		sio_data->beep_pin = superio_inb(sioaddr,
+						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	} else if (sio_data->type == it8783) {
 		int reg25, reg27, reg2a, reg2c, regef;
 
-		superio_select(GPIO);
+		superio_select(sioaddr, GPIO);
 
-		reg25 = superio_inb(IT87_SIO_GPIO1_REG);
-		reg27 = superio_inb(IT87_SIO_GPIO3_REG);
-		reg2a = superio_inb(IT87_SIO_PINX1_REG);
-		reg2c = superio_inb(IT87_SIO_PINX2_REG);
-		regef = superio_inb(IT87_SIO_SPI_REG);
+		reg25 = superio_inb(sioaddr, IT87_SIO_GPIO1_REG);
+		reg27 = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
+		reg2a = superio_inb(sioaddr, IT87_SIO_PINX1_REG);
+		reg2c = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
+		regef = superio_inb(sioaddr, IT87_SIO_SPI_REG);
 
 		/* Check if fan3 is there or not */
 		if ((reg27 & (1 << 0)) || !(reg2c & (1 << 2)))
@@ -2101,7 +2102,8 @@
 			 */
 			if (!(reg2c & (1 << 1))) {
 				reg2c |= (1 << 1);
-				superio_outb(IT87_SIO_PINX2_REG, reg2c);
+				superio_outb(sioaddr, IT87_SIO_PINX2_REG,
+					     reg2c);
 				pr_notice("Routing internal VCCH5V to in7.\n");
 			}
 			pr_notice("in7 routed to internal voltage divider, with external pin disabled.\n");
@@ -2113,13 +2115,14 @@
 		if (reg2c & (1 << 1))
 			sio_data->internal |= (1 << 1);
 
-		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
+		sio_data->beep_pin = superio_inb(sioaddr,
+						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	} else if (sio_data->type == it8603) {
 		int reg27, reg29;
 
-		superio_select(GPIO);
+		superio_select(sioaddr, GPIO);
 
-		reg27 = superio_inb(IT87_SIO_GPIO3_REG);
+		reg27 = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
 
 		/* Check if fan3 is there or not */
 		if (reg27 & (1 << 6))
@@ -2128,7 +2131,7 @@
 			sio_data->skip_fan |= (1 << 2);
 
 		/* Check if fan2 is there or not */
-		reg29 = superio_inb(IT87_SIO_GPIO5_REG);
+		reg29 = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
 		if (reg29 & (1 << 1))
 			sio_data->skip_pwm |= (1 << 1);
 		if (reg29 & (1 << 2))
@@ -2137,38 +2140,39 @@
 		sio_data->skip_in |= (1 << 5); /* No VIN5 */
 		sio_data->skip_in |= (1 << 6); /* No VIN6 */
 
-		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
+		sio_data->beep_pin = superio_inb(sioaddr,
+						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	} else if (sio_data->type == it8620) {
 		int reg;
 
-		superio_select(GPIO);
+		superio_select(sioaddr, GPIO);
 
 		/* Check for pwm5 */
-		reg = superio_inb(IT87_SIO_GPIO1_REG);
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO1_REG);
 		if (reg & (1 << 6))
 			sio_data->skip_pwm |= (1 << 4);
 
 		/* Check for fan4, fan5 */
-		reg = superio_inb(IT87_SIO_GPIO2_REG);
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO2_REG);
 		if (!(reg & (1 << 5)))
 			sio_data->skip_fan |= (1 << 3);
 		if (!(reg & (1 << 4)))
 			sio_data->skip_fan |= (1 << 4);
 
 		/* Check for pwm3, fan3 */
-		reg = superio_inb(IT87_SIO_GPIO3_REG);
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
 		if (reg & (1 << 6))
 			sio_data->skip_pwm |= (1 << 2);
 		if (reg & (1 << 7))
 			sio_data->skip_fan |= (1 << 2);
 
 		/* Check for pwm4 */
-		reg = superio_inb(IT87_SIO_GPIO4_REG);
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO4_REG);
 		if (!(reg & (1 << 2)))
 			sio_data->skip_pwm |= (1 << 3);
 
 		/* Check for pwm2, fan2 */
-		reg = superio_inb(IT87_SIO_GPIO5_REG);
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
 		if (reg & (1 << 1))
 			sio_data->skip_pwm |= (1 << 1);
 		if (reg & (1 << 2))
@@ -2179,14 +2183,15 @@
 			sio_data->skip_fan |= (1 << 5);
 		}
 
-		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
+		sio_data->beep_pin = superio_inb(sioaddr,
+						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	} else {
 		int reg;
 		bool uart6;
 
-		superio_select(GPIO);
+		superio_select(sioaddr, GPIO);
 
-		reg = superio_inb(IT87_SIO_GPIO3_REG);
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
 		if (!sio_data->skip_vid) {
 			/* We need at least 4 VID pins */
 			if (reg & 0x0f) {
@@ -2202,7 +2207,7 @@
 			sio_data->skip_fan |= (1 << 2);
 
 		/* Check if fan2 is there or not */
-		reg = superio_inb(IT87_SIO_GPIO5_REG);
+		reg = superio_inb(sioaddr, IT87_SIO_GPIO5_REG);
 		if (reg & (1 << 1))
 			sio_data->skip_pwm |= (1 << 1);
 		if (reg & (1 << 2))
@@ -2210,9 +2215,10 @@
 
 		if ((sio_data->type == it8718 || sio_data->type == it8720)
 		 && !(sio_data->skip_vid))
-			sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
+			sio_data->vid_value = superio_inb(sioaddr,
+							  IT87_SIO_VID_REG);
 
-		reg = superio_inb(IT87_SIO_PINX2_REG);
+		reg = superio_inb(sioaddr, IT87_SIO_PINX2_REG);
 
 		uart6 = sio_data->type == it8782 && (reg & (1 << 2));
 
@@ -2232,7 +2238,7 @@
 		 */
 		if ((sio_data->type == it8720 || uart6) && !(reg & (1 << 1))) {
 			reg |= (1 << 1);
-			superio_outb(IT87_SIO_PINX2_REG, reg);
+			superio_outb(sioaddr, IT87_SIO_PINX2_REG, reg);
 			pr_notice("Routing internal VCCH to in7\n");
 		}
 		if (reg & (1 << 0))
@@ -2254,7 +2260,8 @@
 			sio_data->skip_temp |= (1 << 2);
 		}
 
-		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
+		sio_data->beep_pin = superio_inb(sioaddr,
+						 IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	}
 	if (sio_data->beep_pin)
 		pr_info("Beeping is supported\n");
@@ -2279,7 +2286,7 @@
 	}
 
 exit:
-	superio_exit();
+	superio_exit(sioaddr);
 	return err;
 }
 
@@ -2939,7 +2946,7 @@
 	struct it87_sio_data sio_data;
 
 	memset(&sio_data, 0, sizeof(struct it87_sio_data));
-	err = it87_find(&isa_address, &sio_data);
+	err = it87_find(REG_2E, &isa_address, &sio_data);
 	if (err)
 		return err;
 	err = platform_driver_register(&it87_driver);