diff --git a/.mailmap b/.mailmap
index 779a9ca..6c3d82d 100644
--- a/.mailmap
+++ b/.mailmap
@@ -11,6 +11,7 @@
 Adam Oldham <oldhamca@gmail.com>
 Adam Radford <aradford@gmail.com>
 Adrian Bunk <bunk@stusta.de>
+Adriana Reus <adi.reus@gmail.com> <adriana.reus@intel.com>
 Alan Cox <alan@lxorguk.ukuu.org.uk>
 Alan Cox <root@hraefn.swansea.linux.org.uk>
 Aleksey Gorelov <aleksey_gorelov@phoenix.com>
@@ -90,6 +91,8 @@
 Mark Brown <broonie@sirena.org.uk>
 Matthieu CASTET <castet.matthieu@free.fr>
 Mauro Carvalho Chehab <mchehab@kernel.org> <maurochehab@gmail.com> <mchehab@infradead.org> <mchehab@redhat.com> <m.chehab@samsung.com> <mchehab@osg.samsung.com> <mchehab@s-opensource.com>
+Matt Ranostay <mranostay@gmail.com> Matthew Ranostay <mranostay@embeddedalley.com>
+Matt Ranostay <mranostay@gmail.com> <matt.ranostay@intel.com>
 Mayuresh Janorkar <mayur@ti.com>
 Michael Buesch <m@bues.ch>
 Michel Dänzer <michel@tungstengraphics.com>
diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
new file mode 100644
index 0000000..f0bbd7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
@@ -0,0 +1,124 @@
+* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver
+
+Required properties:
+ - compatible: Has to contain one of the following:
+	adi,ad5755
+	adi,ad5755-1
+	adi,ad5757
+	adi,ad5735
+	adi,ad5737
+
+ - reg: spi chip select number for the device
+ - spi-cpha or spi-cpol: is the only modes that is supported
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+See include/dt-bindings/iio/ad5755.h
+ - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an
+					 external resistor and thereby bypasses
+					 the internal compensation resistor.
+ - adi,dc-dc-phase:
+	Valid values for DC DC Phase control is:
+	0: All dc-to-dc converters clock on the same edge.
+	1: Channel A and Channel B clock on the same edge,
+	   Channel C and Channel D clock on opposite edges.
+	2: Channel A and Channel C clock on the same edge,
+	   Channel B and Channel D clock on opposite edges.
+	3: Channel A, Channel B, Channel C, and Channel D
+	   clock 90 degrees out of phase from each other.
+ - adi,dc-dc-freq-hz:
+	Valid values for DC DC frequency is [Hz]:
+	250000
+	410000
+	650000
+ - adi,dc-dc-max-microvolt:
+	Valid values for the maximum allowed Vboost voltage supplied by
+	the dc-to-dc converter is:
+	23000000
+	24500000
+	27000000
+	29500000
+
+Optional for every channel:
+ - adi,mode:
+	Valid values for DAC modes is:
+	0: 0 V to 5 V voltage range.
+	1: 0 V to 10 V voltage range.
+	2: Plus minus 5 V voltage range.
+	3: Plus minus 10 V voltage range.
+	4: 4 mA to 20 mA current range.
+	5: 0 mA to 20 mA current range.
+	6: 0 mA to 24 mA current range.
+ - adi,ext-current-sense-resistor: boolean set if the hardware a external
+				   current sense resistor.
+ - adi,enable-voltage-overrange: boolean enable voltage overrange
+ - adi,slew: Array of slewrate settings should contain 3 fields:
+	1: Should be either 0 or 1 in order to enable or disable slewrate.
+	2: Slew rate settings:
+		Valid values for the slew rate update frequency:
+		64000
+		32000
+		16000
+		8000
+		4000
+		2000
+		1000
+		500
+		250
+		125
+		64
+		32
+		16
+		8
+		4
+		0
+	3: Slew step size:
+		Valid values for the step size LSBs:
+		1
+		2
+		4
+		16
+		32
+		64
+		128
+		256
+
+Example:
+dac@0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "adi,ad5755";
+	reg = <0>;
+	spi-max-frequency = <1000000>;
+	spi-cpha;
+	adi,dc-dc-phase = <0>;
+	adi,dc-dc-freq-hz = <410000>;
+	adi,dc-dc-max-microvolt = <23000000>;
+	channel@0 {
+		reg = <0>;
+		adi,mode = <4>;
+		adi,ext-current-sense-resistor;
+		adi,slew = <0 64000 1>;
+	};
+	channel@1 {
+		reg = <1>;
+		adi,mode = <4>;
+		adi,ext-current-sense-resistor;
+		adi,slew = <0 64000 1>;
+	};
+	channel@2 {
+		reg = <2>;
+		adi,mode = <4>;
+		adi,ext-current-sense-resistor;
+		adi,slew = <0 64000 1>;
+	};
+	channel@3 {
+		reg = <3>;
+		adi,mode = <4>;
+		adi,ext-current-sense-resistor;
+		adi,slew = <0 64000 1>;
+	};
+};
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 3132587..89d7820 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -157,12 +157,12 @@
 	  will be called mma7660.
 
 config MMA8452
-	tristate "Freescale MMA8452Q and similar Accelerometers Driver"
+	tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver"
 	depends on I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
-	  Say yes here to build support for the following Freescale 3-axis
+	  Say yes here to build support for the following Freescale / NXP 3-axis
 	  accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC,
 	  FXLS8471Q.
 
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 458c827..799fe64 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1,22 +1,22 @@
 /*
- * mma8452.c - Support for following Freescale 3-axis accelerometers:
+ * mma8452.c - Support for following Freescale / NXP 3-axis accelerometers:
  *
- * MMA8451Q (14 bit)
- * MMA8452Q (12 bit)
- * MMA8453Q (10 bit)
- * MMA8652FC (12 bit)
- * MMA8653FC (10 bit)
- * FXLS8471Q (14 bit)
+ * device name	digital output	7-bit I2C slave address (pin selectable)
+ * ---------------------------------------------------------------------
+ * MMA8451Q	14 bit		0x1c / 0x1d
+ * MMA8452Q	12 bit		0x1c / 0x1d
+ * MMA8453Q	10 bit		0x1c / 0x1d
+ * MMA8652FC	12 bit		0x1d
+ * MMA8653FC	10 bit		0x1d
+ * FXLS8471Q	14 bit		0x1e / 0x1d / 0x1c / 0x1f
  *
- * Copyright 2015 Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
+ * Copyright 2015 Martin Kepplinger <martink@posteo.de>
  * Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net>
  *
  * This file is subject to the terms and conditions of version 2 of
  * the GNU General Public License.  See the file COPYING in the main
  * directory of this archive for more details.
  *
- * 7-bit I2C slave address 0x1c/0x1d (pin selectable)
- *
  * TODO: orientation events
  */
 
@@ -108,7 +108,7 @@
 };
 
 /**
- * struct mma_chip_info - chip specific data for Freescale's accelerometers
+ * struct mma_chip_info - chip specific data
  * @chip_id:			WHO_AM_I register's value
  * @channels:			struct iio_chan_spec matching the device's
  *				capabilities
@@ -1693,5 +1693,5 @@
 module_i2c_driver(mma8452_driver);
 
 MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
-MODULE_DESCRIPTION("Freescale MMA8452 accelerometer driver");
+MODULE_DESCRIPTION("Freescale / NXP MMA8452 accelerometer driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c
index 9fd032d..f8807ad 100644
--- a/drivers/iio/adc/ti-adc081c.c
+++ b/drivers/iio/adc/ti-adc081c.c
@@ -22,6 +22,7 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/acpi.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -149,12 +150,24 @@
 {
 	struct iio_dev *iio;
 	struct adc081c *adc;
-	struct adcxx1c_model *model = &adcxx1c_models[id->driver_data];
+	struct adcxx1c_model *model;
 	int err;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
 		return -EOPNOTSUPP;
 
+	if (ACPI_COMPANION(&client->dev)) {
+		const struct acpi_device_id *ad_id;
+
+		ad_id = acpi_match_device(client->dev.driver->acpi_match_table,
+					  &client->dev);
+		if (!ad_id)
+			return -ENODEV;
+		model = &adcxx1c_models[ad_id->driver_data];
+	} else {
+		model = &adcxx1c_models[id->driver_data];
+	}
+
 	iio = devm_iio_device_alloc(&client->dev, sizeof(*adc));
 	if (!iio)
 		return -ENOMEM;
@@ -231,10 +244,21 @@
 MODULE_DEVICE_TABLE(of, adc081c_of_match);
 #endif
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id adc081c_acpi_match[] = {
+	{ "ADC081C", ADC081C },
+	{ "ADC101C", ADC101C },
+	{ "ADC121C", ADC121C },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, adc081c_acpi_match);
+#endif
+
 static struct i2c_driver adc081c_driver = {
 	.driver = {
 		.name = "adc081c",
 		.of_match_table = of_match_ptr(adc081c_of_match),
+		.acpi_match_table = ACPI_PTR(adc081c_acpi_match),
 	},
 	.probe = adc081c_probe,
 	.remove = adc081c_remove,
diff --git a/drivers/iio/buffer/industrialio-buffer-dma.c b/drivers/iio/buffer/industrialio-buffer-dma.c
index 212cbed..dd99d27 100644
--- a/drivers/iio/buffer/industrialio-buffer-dma.c
+++ b/drivers/iio/buffer/industrialio-buffer-dma.c
@@ -305,7 +305,7 @@
 	queue->fileio.active_block = NULL;
 
 	spin_lock_irq(&queue->list_lock);
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) {
 		block = queue->fileio.blocks[i];
 
 		/* If we can't re-use it free it */
@@ -323,7 +323,7 @@
 
 	INIT_LIST_HEAD(&queue->incoming);
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) {
 		if (queue->fileio.blocks[i]) {
 			block = queue->fileio.blocks[i];
 			if (block->state == IIO_BLOCK_STATE_DEAD) {
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index f7c71da..ca81447 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -248,11 +248,12 @@
 config STX104
 	tristate "Apex Embedded Systems STX104 DAC driver"
 	depends on X86 && ISA_BUS_API
+	select GPIOLIB
 	help
-	  Say yes here to build support for the 2-channel DAC on the Apex
-	  Embedded Systems STX104 integrated analog PC/104 card. The base port
-	  addresses for the devices may be configured via the "base" module
-	  parameter array.
+	  Say yes here to build support for the 2-channel DAC and GPIO on the
+	  Apex Embedded Systems STX104 integrated analog PC/104 card. The base
+	  port addresses for the devices may be configured via the base array
+	  module parameter.
 
 config VF610_DAC
 	tristate "Vybrid vf610 DAC driver"
diff --git a/drivers/iio/dac/ad5755.c b/drivers/iio/dac/ad5755.c
index bfb350a..0fde593 100644
--- a/drivers/iio/dac/ad5755.c
+++ b/drivers/iio/dac/ad5755.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/platform_data/ad5755.h>
@@ -109,6 +110,51 @@
 	ID_AD5737,
 };
 
+#ifdef CONFIG_OF
+static const int ad5755_dcdc_freq_table[][2] = {
+	{ 250000, AD5755_DC_DC_FREQ_250kHZ },
+	{ 410000, AD5755_DC_DC_FREQ_410kHZ },
+	{ 650000, AD5755_DC_DC_FREQ_650kHZ }
+};
+
+static const int ad5755_dcdc_maxv_table[][2] = {
+	{ 23000000, AD5755_DC_DC_MAXV_23V },
+	{ 24500000, AD5755_DC_DC_MAXV_24V5 },
+	{ 27000000, AD5755_DC_DC_MAXV_27V },
+	{ 29500000, AD5755_DC_DC_MAXV_29V5 },
+};
+
+static const int ad5755_slew_rate_table[][2] = {
+	{ 64000, AD5755_SLEW_RATE_64k },
+	{ 32000, AD5755_SLEW_RATE_32k },
+	{ 16000, AD5755_SLEW_RATE_16k },
+	{ 8000, AD5755_SLEW_RATE_8k },
+	{ 4000, AD5755_SLEW_RATE_4k },
+	{ 2000, AD5755_SLEW_RATE_2k },
+	{ 1000, AD5755_SLEW_RATE_1k },
+	{ 500, AD5755_SLEW_RATE_500 },
+	{ 250, AD5755_SLEW_RATE_250 },
+	{ 125, AD5755_SLEW_RATE_125 },
+	{ 64, AD5755_SLEW_RATE_64 },
+	{ 32, AD5755_SLEW_RATE_32 },
+	{ 16, AD5755_SLEW_RATE_16 },
+	{ 8, AD5755_SLEW_RATE_8 },
+	{ 4, AD5755_SLEW_RATE_4 },
+	{ 0, AD5755_SLEW_RATE_0_5 },
+};
+
+static const int ad5755_slew_step_table[][2] = {
+	{ 256, AD5755_SLEW_STEP_SIZE_256 },
+	{ 128, AD5755_SLEW_STEP_SIZE_128 },
+	{ 64, AD5755_SLEW_STEP_SIZE_64 },
+	{ 32, AD5755_SLEW_STEP_SIZE_32 },
+	{ 16, AD5755_SLEW_STEP_SIZE_16 },
+	{ 4, AD5755_SLEW_STEP_SIZE_4 },
+	{ 2, AD5755_SLEW_STEP_SIZE_2 },
+	{ 1, AD5755_SLEW_STEP_SIZE_1 },
+};
+#endif
+
 static int ad5755_write_unlocked(struct iio_dev *indio_dev,
 	unsigned int reg, unsigned int val)
 {
@@ -556,6 +602,129 @@
 	},
 };
 
+#ifdef CONFIG_OF
+static struct ad5755_platform_data *ad5755_parse_dt(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct device_node *pp;
+	struct ad5755_platform_data *pdata;
+	unsigned int tmp;
+	unsigned int tmparray[3];
+	int devnr, i;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	pdata->ext_dc_dc_compenstation_resistor =
+	    of_property_read_bool(np, "adi,ext-dc-dc-compenstation-resistor");
+
+	if (!of_property_read_u32(np, "adi,dc-dc-phase", &tmp))
+		pdata->dc_dc_phase = tmp;
+	else
+		pdata->dc_dc_phase = AD5755_DC_DC_PHASE_ALL_SAME_EDGE;
+
+	pdata->dc_dc_freq = AD5755_DC_DC_FREQ_410kHZ;
+	if (!of_property_read_u32(np, "adi,dc-dc-freq-hz", &tmp)) {
+		for (i = 0; i < ARRAY_SIZE(ad5755_dcdc_freq_table); i++) {
+			if (tmp == ad5755_dcdc_freq_table[i][0]) {
+				pdata->dc_dc_freq = ad5755_dcdc_freq_table[i][1];
+				break;
+			}
+		}
+
+		if (i == ARRAY_SIZE(ad5755_dcdc_freq_table)) {
+			dev_err(dev,
+				"adi,dc-dc-freq out of range selecting 410kHz");
+		}
+	}
+
+	pdata->dc_dc_maxv = AD5755_DC_DC_MAXV_23V;
+	if (!of_property_read_u32(np, "adi,dc-dc-max-microvolt", &tmp)) {
+		for (i = 0; i < ARRAY_SIZE(ad5755_dcdc_maxv_table); i++) {
+			if (tmp == ad5755_dcdc_maxv_table[i][0]) {
+				pdata->dc_dc_maxv = ad5755_dcdc_maxv_table[i][1];
+				break;
+			}
+		}
+		if (i == ARRAY_SIZE(ad5755_dcdc_maxv_table)) {
+				dev_err(dev,
+					"adi,dc-dc-maxv out of range selecting 23V");
+		}
+	}
+
+	devnr = 0;
+	for_each_child_of_node(np, pp) {
+		if (devnr > AD5755_NUM_CHANNELS) {
+			dev_err(dev,
+				"There is to many channels defined in DT\n");
+			goto error_out;
+		}
+
+		if (!of_property_read_u32(pp, "adi,mode", &tmp))
+			pdata->dac[devnr].mode = tmp;
+		else
+			pdata->dac[devnr].mode = AD5755_MODE_CURRENT_4mA_20mA;
+
+		pdata->dac[devnr].ext_current_sense_resistor =
+		    of_property_read_bool(pp, "adi,ext-current-sense-resistor");
+
+		pdata->dac[devnr].enable_voltage_overrange =
+		    of_property_read_bool(pp, "adi,enable-voltage-overrange");
+
+		if (!of_property_read_u32_array(pp, "adi,slew", tmparray, 3)) {
+			pdata->dac[devnr].slew.enable = tmparray[0];
+
+			pdata->dac[devnr].slew.rate = AD5755_SLEW_RATE_64k;
+			for (i = 0; i < ARRAY_SIZE(ad5755_slew_rate_table); i++) {
+				if (tmparray[1] == ad5755_slew_rate_table[i][0]) {
+					pdata->dac[devnr].slew.rate =
+						ad5755_slew_rate_table[i][1];
+					break;
+				}
+			}
+			if (i == ARRAY_SIZE(ad5755_slew_rate_table)) {
+				dev_err(dev,
+					"channel %d slew rate out of range selecting 64kHz",
+					devnr);
+			}
+
+			pdata->dac[devnr].slew.step_size = AD5755_SLEW_STEP_SIZE_1;
+			for (i = 0; i < ARRAY_SIZE(ad5755_slew_step_table); i++) {
+				if (tmparray[2] == ad5755_slew_step_table[i][0]) {
+					pdata->dac[devnr].slew.step_size =
+						ad5755_slew_step_table[i][1];
+					break;
+				}
+			}
+			if (i == ARRAY_SIZE(ad5755_slew_step_table)) {
+				dev_err(dev,
+					"channel %d slew step size out of range selecting 1 LSB",
+					devnr);
+			}
+		} else {
+			pdata->dac[devnr].slew.enable = false;
+			pdata->dac[devnr].slew.rate = AD5755_SLEW_RATE_64k;
+			pdata->dac[devnr].slew.step_size =
+			    AD5755_SLEW_STEP_SIZE_1;
+		}
+		devnr++;
+	}
+
+	return pdata;
+
+ error_out:
+	devm_kfree(dev, pdata);
+	return NULL;
+}
+#else
+static
+struct ad5755_platform_data *ad5755_parse_dt(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
 static int ad5755_probe(struct spi_device *spi)
 {
 	enum ad5755_type type = spi_get_device_id(spi)->driver_data;
@@ -583,8 +752,15 @@
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->num_channels = AD5755_NUM_CHANNELS;
 
-	if (!pdata)
+	if (spi->dev.of_node)
+		pdata = ad5755_parse_dt(&spi->dev);
+	else
+		pdata = spi->dev.platform_data;
+
+	if (!pdata) {
+		dev_warn(&spi->dev, "no platform data? using default\n");
 		pdata = &ad5755_default_pdata;
+	}
 
 	ret = ad5755_init_channels(indio_dev, pdata);
 	if (ret)
@@ -607,6 +783,16 @@
 };
 MODULE_DEVICE_TABLE(spi, ad5755_id);
 
+static const struct of_device_id ad5755_of_match[] = {
+	{ .compatible = "adi,ad5755" },
+	{ .compatible = "adi,ad5755-1" },
+	{ .compatible = "adi,ad5757" },
+	{ .compatible = "adi,ad5735" },
+	{ .compatible = "adi,ad5737" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad5755_of_match);
+
 static struct spi_driver ad5755_driver = {
 	.driver = {
 		.name = "ad5755",
diff --git a/drivers/iio/dac/stx104.c b/drivers/iio/dac/stx104.c
index 2794122..792a971 100644
--- a/drivers/iio/dac/stx104.c
+++ b/drivers/iio/dac/stx104.c
@@ -14,6 +14,7 @@
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/errno.h>
+#include <linux/gpio/driver.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/types.h>
 #include <linux/io.h>
@@ -21,6 +22,7 @@
 #include <linux/isa.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/spinlock.h>
 
 #define STX104_NUM_CHAN 2
 
@@ -49,6 +51,20 @@
 	unsigned base;
 };
 
+/**
+ * struct stx104_gpio - GPIO device private data structure
+ * @chip:	instance of the gpio_chip
+ * @lock:	synchronization lock to prevent I/O race conditions
+ * @base:	base port address of the GPIO device
+ * @out_state:	output bits state
+ */
+struct stx104_gpio {
+	struct gpio_chip chip;
+	spinlock_t lock;
+	unsigned int base;
+	unsigned int out_state;
+};
+
 static int stx104_read_raw(struct iio_dev *indio_dev,
 	struct iio_chan_spec const *chan, int *val, int *val2, long mask)
 {
@@ -88,15 +104,81 @@
 	STX104_CHAN(1)
 };
 
+static int stx104_gpio_get_direction(struct gpio_chip *chip,
+	unsigned int offset)
+{
+	if (offset < 4)
+		return 1;
+
+	return 0;
+}
+
+static int stx104_gpio_direction_input(struct gpio_chip *chip,
+	unsigned int offset)
+{
+	if (offset >= 4)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int stx104_gpio_direction_output(struct gpio_chip *chip,
+	unsigned int offset, int value)
+{
+	if (offset < 4)
+		return -EINVAL;
+
+	chip->set(chip, offset, value);
+	return 0;
+}
+
+static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
+
+	if (offset >= 4)
+		return -EINVAL;
+
+	return !!(inb(stx104gpio->base) & BIT(offset));
+}
+
+static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset,
+	int value)
+{
+	struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
+	const unsigned int mask = BIT(offset) >> 4;
+	unsigned long flags;
+
+	if (offset < 4)
+		return;
+
+	spin_lock_irqsave(&stx104gpio->lock, flags);
+
+	if (value)
+		stx104gpio->out_state |= mask;
+	else
+		stx104gpio->out_state &= ~mask;
+
+	outb(stx104gpio->out_state, stx104gpio->base);
+
+	spin_unlock_irqrestore(&stx104gpio->lock, flags);
+}
+
 static int stx104_probe(struct device *dev, unsigned int id)
 {
 	struct iio_dev *indio_dev;
 	struct stx104_iio *priv;
+	struct stx104_gpio *stx104gpio;
+	int err;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
 	if (!indio_dev)
 		return -ENOMEM;
 
+	stx104gpio = devm_kzalloc(dev, sizeof(*stx104gpio), GFP_KERNEL);
+	if (!stx104gpio)
+		return -ENOMEM;
+
 	if (!devm_request_region(dev, base[id], STX104_EXTENT,
 		dev_name(dev))) {
 		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
@@ -117,14 +199,53 @@
 	outw(0, base[id] + 4);
 	outw(0, base[id] + 6);
 
-	return devm_iio_device_register(dev, indio_dev);
+	err = devm_iio_device_register(dev, indio_dev);
+	if (err) {
+		dev_err(dev, "IIO device registering failed (%d)\n", err);
+		return err;
+	}
+
+	stx104gpio->chip.label = dev_name(dev);
+	stx104gpio->chip.parent = dev;
+	stx104gpio->chip.owner = THIS_MODULE;
+	stx104gpio->chip.base = -1;
+	stx104gpio->chip.ngpio = 8;
+	stx104gpio->chip.get_direction = stx104_gpio_get_direction;
+	stx104gpio->chip.direction_input = stx104_gpio_direction_input;
+	stx104gpio->chip.direction_output = stx104_gpio_direction_output;
+	stx104gpio->chip.get = stx104_gpio_get;
+	stx104gpio->chip.set = stx104_gpio_set;
+	stx104gpio->base = base[id] + 3;
+	stx104gpio->out_state = 0x0;
+
+	spin_lock_init(&stx104gpio->lock);
+
+	dev_set_drvdata(dev, stx104gpio);
+
+	err = gpiochip_add_data(&stx104gpio->chip, stx104gpio);
+	if (err) {
+		dev_err(dev, "GPIO registering failed (%d)\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int stx104_remove(struct device *dev, unsigned int id)
+{
+	struct stx104_gpio *const stx104gpio = dev_get_drvdata(dev);
+
+	gpiochip_remove(&stx104gpio->chip);
+
+	return 0;
 }
 
 static struct isa_driver stx104_driver = {
 	.probe = stx104_probe,
 	.driver = {
 		.name = "stx104"
-	}
+	},
+	.remove = stx104_remove
 };
 
 module_isa_driver(stx104_driver, num_stx104);
diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index 7c15c30..98457f0 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -64,6 +64,8 @@
 };
 ATTRIBUTE_GROUPS(iio_trig_dev);
 
+static struct iio_trigger *__iio_trigger_find_by_name(const char *name);
+
 int iio_trigger_register(struct iio_trigger *trig_info)
 {
 	int ret;
@@ -86,11 +88,19 @@
 
 	/* Add to list of available triggers held by the IIO core */
 	mutex_lock(&iio_trigger_list_lock);
+	if (__iio_trigger_find_by_name(trig_info->name)) {
+		pr_err("Duplicate trigger name '%s'\n", trig_info->name);
+		ret = -EEXIST;
+		goto error_device_del;
+	}
 	list_add_tail(&trig_info->list, &iio_trigger_list);
 	mutex_unlock(&iio_trigger_list_lock);
 
 	return 0;
 
+error_device_del:
+	mutex_unlock(&iio_trigger_list_lock);
+	device_del(&trig_info->dev);
 error_unregister_id:
 	ida_simple_remove(&iio_trigger_ida, trig_info->id);
 	return ret;
@@ -109,6 +119,18 @@
 }
 EXPORT_SYMBOL(iio_trigger_unregister);
 
+/* Search for trigger by name, assuming iio_trigger_list_lock held */
+static struct iio_trigger *__iio_trigger_find_by_name(const char *name)
+{
+	struct iio_trigger *iter;
+
+	list_for_each_entry(iter, &iio_trigger_list, list)
+		if (!strcmp(iter->name, name))
+			return iter;
+
+	return NULL;
+}
+
 static struct iio_trigger *iio_trigger_find_by_name(const char *name,
 						    size_t len)
 {
diff --git a/drivers/iio/light/gp2ap020a00f.c b/drivers/iio/light/gp2ap020a00f.c
index 6d41086..af73af3 100644
--- a/drivers/iio/light/gp2ap020a00f.c
+++ b/drivers/iio/light/gp2ap020a00f.c
@@ -1287,22 +1287,14 @@
 	struct gp2ap020a00f_data *data = iio_priv(indio_dev);
 	int err = -EINVAL;
 
-	mutex_lock(&data->lock);
-
-	switch (mask) {
-	case IIO_CHAN_INFO_RAW:
-		if (iio_buffer_enabled(indio_dev)) {
-			err = -EBUSY;
-			goto error_unlock;
-		}
+	if (mask == IIO_CHAN_INFO_RAW) {
+		err = iio_device_claim_direct_mode(indio_dev);
+		if (err)
+			return err;
 
 		err = gp2ap020a00f_read_channel(data, chan, val);
-		break;
+		iio_device_release_direct_mode(indio_dev);
 	}
-
-error_unlock:
-	mutex_unlock(&data->lock);
-
 	return err < 0 ? err : IIO_VAL_INT;
 }
 
diff --git a/drivers/iio/light/isl29125.c b/drivers/iio/light/isl29125.c
index e2945a2..a6b9d66 100644
--- a/drivers/iio/light/isl29125.c
+++ b/drivers/iio/light/isl29125.c
@@ -50,7 +50,6 @@
 
 struct isl29125_data {
 	struct i2c_client *client;
-	struct mutex lock;
 	u8 conf1;
 	u16 buffer[8]; /* 3x 16-bit, padding, 8 bytes timestamp */
 };
@@ -128,11 +127,11 @@
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		if (iio_buffer_enabled(indio_dev))
-			return -EBUSY;
-		mutex_lock(&data->lock);
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
 		ret = isl29125_read_data(data, chan->scan_index);
-		mutex_unlock(&data->lock);
+		iio_device_release_direct_mode(indio_dev);
 		if (ret < 0)
 			return ret;
 		*val = ret;
@@ -259,7 +258,6 @@
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
-	mutex_init(&data->lock);
 
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->info = &isl29125_info;
diff --git a/drivers/iio/light/tcs3414.c b/drivers/iio/light/tcs3414.c
index f90f8c5..8a15fb5 100644
--- a/drivers/iio/light/tcs3414.c
+++ b/drivers/iio/light/tcs3414.c
@@ -53,7 +53,6 @@
 
 struct tcs3414_data {
 	struct i2c_client *client;
-	struct mutex lock;
 	u8 control;
 	u8 gain;
 	u8 timing;
@@ -134,16 +133,16 @@
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		if (iio_buffer_enabled(indio_dev))
-			return -EBUSY;
-		mutex_lock(&data->lock);
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
 		ret = tcs3414_req_data(data);
 		if (ret < 0) {
-			mutex_unlock(&data->lock);
+			iio_device_release_direct_mode(indio_dev);
 			return ret;
 		}
 		ret = i2c_smbus_read_word_data(data->client, chan->address);
-		mutex_unlock(&data->lock);
+		iio_device_release_direct_mode(indio_dev);
 		if (ret < 0)
 			return ret;
 		*val = ret;
@@ -288,7 +287,6 @@
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
-	mutex_init(&data->lock);
 
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->info = &tcs3414_info;
diff --git a/drivers/iio/light/tcs3472.c b/drivers/iio/light/tcs3472.c
index 1b530bf..b29312f 100644
--- a/drivers/iio/light/tcs3472.c
+++ b/drivers/iio/light/tcs3472.c
@@ -52,7 +52,6 @@
 
 struct tcs3472_data {
 	struct i2c_client *client;
-	struct mutex lock;
 	u8 enable;
 	u8 control;
 	u8 atime;
@@ -117,17 +116,16 @@
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		if (iio_buffer_enabled(indio_dev))
-			return -EBUSY;
-
-		mutex_lock(&data->lock);
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
 		ret = tcs3472_req_data(data);
 		if (ret < 0) {
-			mutex_unlock(&data->lock);
+			iio_device_release_direct_mode(indio_dev);
 			return ret;
 		}
 		ret = i2c_smbus_read_word_data(data->client, chan->address);
-		mutex_unlock(&data->lock);
+		iio_device_release_direct_mode(indio_dev);
 		if (ret < 0)
 			return ret;
 		*val = ret;
@@ -263,7 +261,6 @@
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
-	mutex_init(&data->lock);
 
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->info = &tcs3472_info;
diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c
index 8fb6f7a..953ffbc 100644
--- a/drivers/iio/pressure/ms5637.c
+++ b/drivers/iio/pressure/ms5637.c
@@ -1,6 +1,6 @@
 /*
- * ms5637.c - Support for Measurement-Specialties ms5637 and ms8607
- *            pressure & temperature sensor
+ * ms5637.c - Support for Measurement-Specialties MS5637, MS5805
+ *            MS5837 and MS8607 pressure & temperature sensor
  *
  * Copyright (c) 2015 Measurement-Specialties
  *
@@ -11,6 +11,10 @@
  * Datasheet:
  *  http://www.meas-spec.com/downloads/MS5637-02BA03.pdf
  * Datasheet:
+ *  http://www.meas-spec.com/downloads/MS5805-02BA01.pdf
+ * Datasheet:
+ *  http://www.meas-spec.com/downloads/MS5837-30BA.pdf
+ * Datasheet:
  *  http://www.meas-spec.com/downloads/MS8607-02BA01.pdf
  */
 
@@ -170,7 +174,9 @@
 
 static const struct i2c_device_id ms5637_id[] = {
 	{"ms5637", 0},
-	{"ms8607-temppressure", 1},
+	{"ms5805", 0},
+	{"ms5837", 0},
+	{"ms8607-temppressure", 0},
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, ms5637_id);
diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c
index 9aa2ce5..2e3a70e 100644
--- a/drivers/iio/proximity/as3935.c
+++ b/drivers/iio/proximity/as3935.c
@@ -231,10 +231,16 @@
 {
 	struct as3935_state *st;
 	int val;
+	int ret;
 
 	st = container_of(work, struct as3935_state, work.work);
 
-	as3935_read(st, AS3935_INT, &val);
+	ret = as3935_read(st, AS3935_INT, &val);
+	if (ret) {
+		dev_warn(&st->spi->dev, "read error\n");
+		return;
+	}
+
 	val &= AS3935_INT_MASK;
 
 	switch (val) {
@@ -242,7 +248,7 @@
 		iio_trigger_poll(st->trig);
 		break;
 	case AS3935_NOISE_INT:
-		dev_warn(&st->spi->dev, "noise level is too high");
+		dev_warn(&st->spi->dev, "noise level is too high\n");
 		break;
 	}
 }
@@ -346,7 +352,6 @@
 
 	st = iio_priv(indio_dev);
 	st->spi = spi;
-	st->tune_cap = 0;
 
 	spi_set_drvdata(spi, indio_dev);
 	mutex_init(&st->lock);
diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
index 4f502386..c0b0e82 100644
--- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
+++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
@@ -203,22 +203,19 @@
 	struct lidar_data *data = iio_priv(indio_dev);
 	int ret = -EINVAL;
 
-	mutex_lock(&indio_dev->mlock);
-
-	if (iio_buffer_enabled(indio_dev) && mask == IIO_CHAN_INFO_RAW) {
-		ret = -EBUSY;
-		goto error_busy;
-	}
-
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW: {
 		u16 reg;
 
+		if (iio_device_claim_direct_mode(indio_dev))
+			return -EBUSY;
+
 		ret = lidar_get_measurement(data, &reg);
 		if (!ret) {
 			*val = reg;
 			ret = IIO_VAL_INT;
 		}
+		iio_device_release_direct_mode(indio_dev);
 		break;
 	}
 	case IIO_CHAN_INFO_SCALE:
@@ -228,9 +225,6 @@
 		break;
 	}
 
-error_busy:
-	mutex_unlock(&indio_dev->mlock);
-
 	return ret;
 }
 
diff --git a/drivers/staging/iio/accel/sca3000_core.c b/drivers/staging/iio/accel/sca3000_core.c
index a8f533a..53c5425 100644
--- a/drivers/staging/iio/accel/sca3000_core.c
+++ b/drivers/staging/iio/accel/sca3000_core.c
@@ -1046,6 +1046,8 @@
 
 	/* Disable ring buffer */
 	ret = sca3000_read_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL);
+	if (ret < 0)
+		goto error_ret;
 	ret = sca3000_write_ctrl_reg(st, SCA3000_REG_CTRL_SEL_OUT_CTRL,
 				     (ret & SCA3000_OUT_CTRL_PROT_MASK)
 				     | SCA3000_OUT_CTRL_BUF_X_EN
diff --git a/tools/iio/iio_generic_buffer.c b/tools/iio/iio_generic_buffer.c
index e8c3052..0e8a1f7 100644
--- a/tools/iio/iio_generic_buffer.c
+++ b/tools/iio/iio_generic_buffer.c
@@ -341,7 +341,7 @@
 
 	char *data = NULL;
 	ssize_t read_size;
-	int dev_num = -1, trig_num;
+	int dev_num = -1, trig_num = -1;
 	char *buffer_access = NULL;
 	int scan_size;
 	int noevents = 0;
@@ -456,7 +456,7 @@
 
 	if (notrigger) {
 		printf("trigger-less mode selected\n");
-	} if (trig_num > 0) {
+	} if (trig_num >= 0) {
 		char *trig_dev_name;
 		ret = asprintf(&trig_dev_name, "%strigger%d", iio_dir, trig_num);
 		if (ret < 0) {