include/linux/mod_devicetable.h - kernel/msm-4.9 - Gitiles

 /*
  * Device tables which are exported to userspace via
  * scripts/mod/file2alias.c.  You must keep that file in sync with this
  * header.
  */

 #ifndef LINUX_MOD_DEVICETABLE_H
 #define LINUX_MOD_DEVICETABLE_H

 #ifdef __KERNEL__
 #include <linux/types.h>
 typedef unsigned long kernel_ulong_t;
 #endif

 #define PCI_ANY_ID (~0)

 struct pci_device_id {
 	__u32 vendor, device;		/* Vendor and device ID or PCI_ANY_ID*/
 	__u32 subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
 	__u32 class, class_mask;	/* (class,subclass,prog-if) triplet */
 	kernel_ulong_t driver_data;	/* Data private to the driver */
 };


 #define IEEE1394_MATCH_VENDOR_ID	0x0001
 #define IEEE1394_MATCH_MODEL_ID		0x0002
 #define IEEE1394_MATCH_SPECIFIER_ID	0x0004
 #define IEEE1394_MATCH_VERSION		0x0008

 struct ieee1394_device_id {
 	__u32 match_flags;
 	__u32 vendor_id;
 	__u32 model_id;
 	__u32 specifier_id;
 	__u32 version;
 	kernel_ulong_t driver_data
 		__attribute__((aligned(sizeof(kernel_ulong_t))));
 };


 /*
  * Device table entry for "new style" table-driven USB drivers.
  * User mode code can read these tables to choose which modules to load.
  * Declare the table as a MODULE_DEVICE_TABLE.
  *
  * A probe() parameter will point to a matching entry from this table.
  * Use the driver_info field for each match to hold information tied
  * to that match:  device quirks, etc.
  *
  * Terminate the driver's table with an all-zeroes entry.
  * Use the flag values to control which fields are compared.
  */

 /**
  * struct usb_device_id - identifies USB devices for probing and hotplugging
  * @match_flags: Bit mask controlling of the other fields are used to match
  *	against new devices.  Any field except for driver_info may be used,
  *	although some only make sense in conjunction with other fields.
  *	This is usually set by a USB_DEVICE_*() macro, which sets all
  *	other fields in this structure except for driver_info.
  * @idVendor: USB vendor ID for a device; numbers are assigned
  *	by the USB forum to its members.
  * @idProduct: Vendor-assigned product ID.
  * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
  *	This is also used to identify individual product versions, for
  *	a range consisting of a single device.
  * @bcdDevice_hi: High end of version number range.  The range of product
  *	versions is inclusive.
  * @bDeviceClass: Class of device; numbers are assigned
  *	by the USB forum.  Products may choose to implement classes,
  *	or be vendor-specific.  Device classes specify behavior of all
  *	the interfaces on a devices.
  * @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
  * @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
  * @bInterfaceClass: Class of interface; numbers are assigned
  *	by the USB forum.  Products may choose to implement classes,
  *	or be vendor-specific.  Interface classes specify behavior only
  *	of a given interface; other interfaces may support other classes.
  * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
  * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
  * @driver_info: Holds information used by the driver.  Usually it holds
  *	a pointer to a descriptor understood by the driver, or perhaps
  *	device flags.
  *
  * In most cases, drivers will create a table of device IDs by using
  * USB_DEVICE(), or similar macros designed for that purpose.
  * They will then export it to userspace using MODULE_DEVICE_TABLE(),
  * and provide it to the USB core through their usb_driver structure.
  *
  * See the usb_match_id() function for information about how matches are
  * performed.  Briefly, you will normally use one of several macros to help
  * construct these entries.  Each entry you provide will either identify
  * one or more specific products, or will identify a class of products
  * which have agreed to behave the same.  You should put the more specific
  * matches towards the beginning of your table, so that driver_info can
  * record quirks of specific products.
  */
 struct usb_device_id {
 	/* which fields to match against? */
 	__u16		match_flags;

 	/* Used for product specific matches; range is inclusive */
 	__u16		idVendor;
 	__u16		idProduct;
 	__u16		bcdDevice_lo;
 	__u16		bcdDevice_hi;

 	/* Used for device class matches */
 	__u8		bDeviceClass;
 	__u8		bDeviceSubClass;
 	__u8		bDeviceProtocol;

 	/* Used for interface class matches */
 	__u8		bInterfaceClass;
 	__u8		bInterfaceSubClass;
 	__u8		bInterfaceProtocol;

 	/* not matched against */
 	kernel_ulong_t	driver_info;
 };

 /* Some useful macros to use to create struct usb_device_id */
 #define USB_DEVICE_ID_MATCH_VENDOR		0x0001
 #define USB_DEVICE_ID_MATCH_PRODUCT		0x0002
 #define USB_DEVICE_ID_MATCH_DEV_LO		0x0004
 #define USB_DEVICE_ID_MATCH_DEV_HI		0x0008
 #define USB_DEVICE_ID_MATCH_DEV_CLASS		0x0010
 #define USB_DEVICE_ID_MATCH_DEV_SUBCLASS	0x0020
 #define USB_DEVICE_ID_MATCH_DEV_PROTOCOL	0x0040
 #define USB_DEVICE_ID_MATCH_INT_CLASS		0x0080
 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS	0x0100
 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL	0x0200

 /* s390 CCW devices */
 struct ccw_device_id {
 	__u16	match_flags;	/* which fields to match against */

 	__u16	cu_type;	/* control unit type     */
 	__u16	dev_type;	/* device type           */
 	__u8	cu_model;	/* control unit model    */
 	__u8	dev_model;	/* device model          */

 	kernel_ulong_t driver_info;
 };

 #define CCW_DEVICE_ID_MATCH_CU_TYPE		0x01
 #define CCW_DEVICE_ID_MATCH_CU_MODEL		0x02
 #define CCW_DEVICE_ID_MATCH_DEVICE_TYPE		0x04
 #define CCW_DEVICE_ID_MATCH_DEVICE_MODEL	0x08


 #define PNP_ID_LEN	8
 #define PNP_MAX_DEVICES	8

 struct pnp_device_id {
 	__u8 id[PNP_ID_LEN];
 	kernel_ulong_t driver_data;
 };

 struct pnp_card_device_id {
 	__u8 id[PNP_ID_LEN];
 	kernel_ulong_t driver_data;
 	struct {
 		__u8 id[PNP_ID_LEN];
 	} devs[PNP_MAX_DEVICES];
 };


 #define SERIO_ANY	0xff

 struct serio_device_id {
 	__u8 type;
 	__u8 extra;
 	__u8 id;
 	__u8 proto;
 };

 /*
  * Struct used for matching a device
  */
 struct of_device_id
 {
 	char	name[32];
 	char	type[32];
 	char	compatible[128];
 #ifdef __KERNEL__
 	void	*data;
 #else
 	kernel_ulong_t data;
 #endif
 };

 /* VIO */
 struct vio_device_id {
 	char type[32];
 	char compat[32];
 };

 /* PCMCIA */

 struct pcmcia_device_id {
 	__u16		match_flags;

 	__u16		manf_id;
 	__u16 		card_id;

 	__u8  		func_id;

 	/* for real multi-function devices */
 	__u8  		function;

 	/* for pseudo multi-function devices */
 	__u8  		device_no;

 	__u32 		prod_id_hash[4]
 		__attribute__((aligned(sizeof(__u32))));

 	/* not matched against in kernelspace*/
 #ifdef __KERNEL__
 	const char *	prod_id[4];
 #else
 	kernel_ulong_t	prod_id[4]
 		__attribute__((aligned(sizeof(kernel_ulong_t))));
 #endif

 	/* not matched against */
 	kernel_ulong_t	driver_info;
 #ifdef __KERNEL__
 	char *		cisfile;
 #else
 	kernel_ulong_t	cisfile;
 #endif
 };

 #define PCMCIA_DEV_ID_MATCH_MANF_ID	0x0001
 #define PCMCIA_DEV_ID_MATCH_CARD_ID	0x0002
 #define PCMCIA_DEV_ID_MATCH_FUNC_ID	0x0004
 #define PCMCIA_DEV_ID_MATCH_FUNCTION	0x0008
 #define PCMCIA_DEV_ID_MATCH_PROD_ID1	0x0010
 #define PCMCIA_DEV_ID_MATCH_PROD_ID2	0x0020
 #define PCMCIA_DEV_ID_MATCH_PROD_ID3	0x0040
 #define PCMCIA_DEV_ID_MATCH_PROD_ID4	0x0080
 #define PCMCIA_DEV_ID_MATCH_DEVICE_NO	0x0100
 #define PCMCIA_DEV_ID_MATCH_FAKE_CIS	0x0200
 #define PCMCIA_DEV_ID_MATCH_ANONYMOUS	0x0400

 /* I2C */
 struct i2c_device_id {
 	__u16 id;
 };

 /* Input */
 #define INPUT_DEVICE_ID_EV_MAX		0x1f
 #define INPUT_DEVICE_ID_KEY_MAX		0x1ff
 #define INPUT_DEVICE_ID_REL_MAX		0x0f
 #define INPUT_DEVICE_ID_ABS_MAX		0x3f
 #define INPUT_DEVICE_ID_MSC_MAX		0x07
 #define INPUT_DEVICE_ID_LED_MAX		0x0f
 #define INPUT_DEVICE_ID_SND_MAX		0x07
 #define INPUT_DEVICE_ID_FF_MAX		0x7f
 #define INPUT_DEVICE_ID_SW_MAX		0x0f

 #define INPUT_DEVICE_ID_MATCH_BUS	1
 #define INPUT_DEVICE_ID_MATCH_VENDOR	2
 #define INPUT_DEVICE_ID_MATCH_PRODUCT	4
 #define INPUT_DEVICE_ID_MATCH_VERSION	8

 #define INPUT_DEVICE_ID_MATCH_EVBIT	0x0010
 #define INPUT_DEVICE_ID_MATCH_KEYBIT	0x0020
 #define INPUT_DEVICE_ID_MATCH_RELBIT	0x0040
 #define INPUT_DEVICE_ID_MATCH_ABSBIT	0x0080
 #define INPUT_DEVICE_ID_MATCH_MSCIT	0x0100
 #define INPUT_DEVICE_ID_MATCH_LEDBIT	0x0200
 #define INPUT_DEVICE_ID_MATCH_SNDBIT	0x0400
 #define INPUT_DEVICE_ID_MATCH_FFBIT	0x0800
 #define INPUT_DEVICE_ID_MATCH_SWBIT	0x1000

 struct input_device_id {

 	kernel_ulong_t flags;

 	__u16 bustype;
 	__u16 vendor;
 	__u16 product;
 	__u16 version;

 	kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1];
 	kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1];
 	kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1];
 	kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1];
 	kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1];
 	kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1];
 	kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
 	kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
 	kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];

 	kernel_ulong_t driver_info;
 };

 #endif /* LINUX_MOD_DEVICETABLE_H */
	/*
	* Device tables which are exported to userspace via
	* scripts/mod/file2alias.c. You must keep that file in sync with this
	* header.
	*/

	#ifndef LINUX_MOD_DEVICETABLE_H
	#define LINUX_MOD_DEVICETABLE_H

	#ifdef __KERNEL__
	#include <linux/types.h>
	typedef unsigned long kernel_ulong_t;
	#endif

	#define PCI_ANY_ID (~0)

	struct pci_device_id {
	__u32 vendor, device; /* Vendor and device ID or PCI_ANY_ID*/
	__u32 subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
	__u32 class, class_mask; /* (class,subclass,prog-if) triplet */
	kernel_ulong_t driver_data; /* Data private to the driver */
	};


	#define IEEE1394_MATCH_VENDOR_ID 0x0001
	#define IEEE1394_MATCH_MODEL_ID 0x0002
	#define IEEE1394_MATCH_SPECIFIER_ID 0x0004
	#define IEEE1394_MATCH_VERSION 0x0008

	struct ieee1394_device_id {
	__u32 match_flags;
	__u32 vendor_id;
	__u32 model_id;
	__u32 specifier_id;
	__u32 version;
	kernel_ulong_t driver_data
	__attribute__((aligned(sizeof(kernel_ulong_t))));
	};


	/*
	* Device table entry for "new style" table-driven USB drivers.
	* User mode code can read these tables to choose which modules to load.
	* Declare the table as a MODULE_DEVICE_TABLE.
	*
	* A probe() parameter will point to a matching entry from this table.
	* Use the driver_info field for each match to hold information tied
	* to that match: device quirks, etc.
	*
	* Terminate the driver's table with an all-zeroes entry.
	* Use the flag values to control which fields are compared.
	*/

	/**
	* struct usb_device_id - identifies USB devices for probing and hotplugging
	* @match_flags: Bit mask controlling of the other fields are used to match
	* against new devices. Any field except for driver_info may be used,
	* although some only make sense in conjunction with other fields.
	* This is usually set by a USB_DEVICE_*() macro, which sets all
	* other fields in this structure except for driver_info.
	* @idVendor: USB vendor ID for a device; numbers are assigned
	* by the USB forum to its members.
	* @idProduct: Vendor-assigned product ID.
	* @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
	* This is also used to identify individual product versions, for
	* a range consisting of a single device.
	* @bcdDevice_hi: High end of version number range. The range of product
	* versions is inclusive.
	* @bDeviceClass: Class of device; numbers are assigned
	* by the USB forum. Products may choose to implement classes,
	* or be vendor-specific. Device classes specify behavior of all
	* the interfaces on a devices.
	* @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
	* @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
	* @bInterfaceClass: Class of interface; numbers are assigned
	* by the USB forum. Products may choose to implement classes,
	* or be vendor-specific. Interface classes specify behavior only
	* of a given interface; other interfaces may support other classes.
	* @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
	* @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
	* @driver_info: Holds information used by the driver. Usually it holds
	* a pointer to a descriptor understood by the driver, or perhaps
	* device flags.
	*
	* In most cases, drivers will create a table of device IDs by using
	* USB_DEVICE(), or similar macros designed for that purpose.
	* They will then export it to userspace using MODULE_DEVICE_TABLE(),
	* and provide it to the USB core through their usb_driver structure.
	*
	* See the usb_match_id() function for information about how matches are
	* performed. Briefly, you will normally use one of several macros to help
	* construct these entries. Each entry you provide will either identify
	* one or more specific products, or will identify a class of products
	* which have agreed to behave the same. You should put the more specific
	* matches towards the beginning of your table, so that driver_info can
	* record quirks of specific products.
	*/
	struct usb_device_id {
	/* which fields to match against? */
	__u16 match_flags;

	/* Used for product specific matches; range is inclusive */
	__u16 idVendor;
	__u16 idProduct;
	__u16 bcdDevice_lo;
	__u16 bcdDevice_hi;

	/* Used for device class matches */
	__u8 bDeviceClass;
	__u8 bDeviceSubClass;
	__u8 bDeviceProtocol;

	/* Used for interface class matches */
	__u8 bInterfaceClass;
	__u8 bInterfaceSubClass;
	__u8 bInterfaceProtocol;

	/* not matched against */
	kernel_ulong_t driver_info;
	};

	/* Some useful macros to use to create struct usb_device_id */
	#define USB_DEVICE_ID_MATCH_VENDOR 0x0001
	#define USB_DEVICE_ID_MATCH_PRODUCT 0x0002
	#define USB_DEVICE_ID_MATCH_DEV_LO 0x0004
	#define USB_DEVICE_ID_MATCH_DEV_HI 0x0008
	#define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010
	#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020
	#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040
	#define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080
	#define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100
	#define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200

	/* s390 CCW devices */
	struct ccw_device_id {
	__u16 match_flags; /* which fields to match against */

	__u16 cu_type; /* control unit type */
	__u16 dev_type; /* device type */
	__u8 cu_model; /* control unit model */
	__u8 dev_model; /* device model */

	kernel_ulong_t driver_info;
	};

	#define CCW_DEVICE_ID_MATCH_CU_TYPE 0x01
	#define CCW_DEVICE_ID_MATCH_CU_MODEL 0x02
	#define CCW_DEVICE_ID_MATCH_DEVICE_TYPE 0x04
	#define CCW_DEVICE_ID_MATCH_DEVICE_MODEL 0x08


	#define PNP_ID_LEN 8
	#define PNP_MAX_DEVICES 8

	struct pnp_device_id {
	__u8 id[PNP_ID_LEN];
	kernel_ulong_t driver_data;
	};

	struct pnp_card_device_id {
	__u8 id[PNP_ID_LEN];
	kernel_ulong_t driver_data;
	struct {
	__u8 id[PNP_ID_LEN];
	} devs[PNP_MAX_DEVICES];
	};


	#define SERIO_ANY 0xff

	struct serio_device_id {
	__u8 type;
	__u8 extra;
	__u8 id;
	__u8 proto;
	};

	/*
	* Struct used for matching a device
	*/
	struct of_device_id
	{
	char name[32];
	char type[32];
	char compatible[128];
	#ifdef __KERNEL__
	void *data;
	#else
	kernel_ulong_t data;
	#endif
	};

	/* VIO */
	struct vio_device_id {
	char type[32];
	char compat[32];
	};

	/* PCMCIA */

	struct pcmcia_device_id {
	__u16 match_flags;

	__u16 manf_id;
	__u16 card_id;

	__u8 func_id;

	/* for real multi-function devices */
	__u8 function;

	/* for pseudo multi-function devices */
	__u8 device_no;

	__u32 prod_id_hash[4]
	__attribute__((aligned(sizeof(__u32))));

	/* not matched against in kernelspace*/
	#ifdef __KERNEL__
	const char * prod_id[4];
	#else
	kernel_ulong_t prod_id[4]
	__attribute__((aligned(sizeof(kernel_ulong_t))));
	#endif

	/* not matched against */
	kernel_ulong_t driver_info;
	#ifdef __KERNEL__
	char * cisfile;
	#else
	kernel_ulong_t cisfile;
	#endif
	};

	#define PCMCIA_DEV_ID_MATCH_MANF_ID 0x0001
	#define PCMCIA_DEV_ID_MATCH_CARD_ID 0x0002
	#define PCMCIA_DEV_ID_MATCH_FUNC_ID 0x0004
	#define PCMCIA_DEV_ID_MATCH_FUNCTION 0x0008
	#define PCMCIA_DEV_ID_MATCH_PROD_ID1 0x0010
	#define PCMCIA_DEV_ID_MATCH_PROD_ID2 0x0020
	#define PCMCIA_DEV_ID_MATCH_PROD_ID3 0x0040
	#define PCMCIA_DEV_ID_MATCH_PROD_ID4 0x0080
	#define PCMCIA_DEV_ID_MATCH_DEVICE_NO 0x0100
	#define PCMCIA_DEV_ID_MATCH_FAKE_CIS 0x0200
	#define PCMCIA_DEV_ID_MATCH_ANONYMOUS 0x0400

	/* I2C */
	struct i2c_device_id {
	__u16 id;
	};

	/* Input */
	#define INPUT_DEVICE_ID_EV_MAX 0x1f
	#define INPUT_DEVICE_ID_KEY_MAX 0x1ff
	#define INPUT_DEVICE_ID_REL_MAX 0x0f
	#define INPUT_DEVICE_ID_ABS_MAX 0x3f
	#define INPUT_DEVICE_ID_MSC_MAX 0x07
	#define INPUT_DEVICE_ID_LED_MAX 0x0f
	#define INPUT_DEVICE_ID_SND_MAX 0x07
	#define INPUT_DEVICE_ID_FF_MAX 0x7f
	#define INPUT_DEVICE_ID_SW_MAX 0x0f

	#define INPUT_DEVICE_ID_MATCH_BUS 1
	#define INPUT_DEVICE_ID_MATCH_VENDOR 2
	#define INPUT_DEVICE_ID_MATCH_PRODUCT 4
	#define INPUT_DEVICE_ID_MATCH_VERSION 8

	#define INPUT_DEVICE_ID_MATCH_EVBIT 0x0010
	#define INPUT_DEVICE_ID_MATCH_KEYBIT 0x0020
	#define INPUT_DEVICE_ID_MATCH_RELBIT 0x0040
	#define INPUT_DEVICE_ID_MATCH_ABSBIT 0x0080
	#define INPUT_DEVICE_ID_MATCH_MSCIT 0x0100
	#define INPUT_DEVICE_ID_MATCH_LEDBIT 0x0200
	#define INPUT_DEVICE_ID_MATCH_SNDBIT 0x0400
	#define INPUT_DEVICE_ID_MATCH_FFBIT 0x0800
	#define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000

	struct input_device_id {

	kernel_ulong_t flags;

	__u16 bustype;
	__u16 vendor;
	__u16 product;
	__u16 version;

	kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1];
	kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1];
	kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1];
	kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1];
	kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1];
	kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1];
	kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
	kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
	kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];

	kernel_ulong_t driver_info;
	};

	#endif /* LINUX_MOD_DEVICETABLE_H */