Merge tag 'v3.0' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus
diff --git a/CREDITS b/CREDITS
index a7ea8e3..1deb331 100644
--- a/CREDITS
+++ b/CREDITS
@@ -518,6 +518,14 @@
E: zab@zabbo.net
D: maestro pci sound
+N: David Brownell
+D: Kernel engineer, mentor, and friend. Maintained USB EHCI and
+D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few
+D: device drivers. His encouragement also helped many engineers get
+D: started working on the Linux kernel. David passed away in early
+D: 2011, and will be greatly missed.
+W: https://lkml.org/lkml/2011/4/5/36
+
N: Gary Brubaker
E: xavyer@ix.netcom.com
D: USB Serial Empeg Empeg-car Mark I/II Driver
diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
new file mode 100644
index 0000000..aa11dbd
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870
@@ -0,0 +1,56 @@
+What: /sys/class/backlight/<backlight>/<ambient light zone>_max
+What: /sys/class/backlight/<backlight>/l1_daylight_max
+What: /sys/class/backlight/<backlight>/l2_bright_max
+What: /sys/class/backlight/<backlight>/l3_office_max
+What: /sys/class/backlight/<backlight>/l4_indoor_max
+What: /sys/class/backlight/<backlight>/l5_dark_max
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Control the maximum brightness for <ambient light zone>
+ on this <backlight>. Values are between 0 and 127. This file
+ will also show the brightness level stored for this
+ <ambient light zone>.
+
+What: /sys/class/backlight/<backlight>/<ambient light zone>_dim
+What: /sys/class/backlight/<backlight>/l2_bright_dim
+What: /sys/class/backlight/<backlight>/l3_office_dim
+What: /sys/class/backlight/<backlight>/l4_indoor_dim
+What: /sys/class/backlight/<backlight>/l5_dark_dim
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Control the dim brightness for <ambient light zone>
+ on this <backlight>. Values are between 0 and 127, typically
+ set to 0. Full off when the backlight is disabled.
+ This file will also show the dim brightness level stored for
+ this <ambient light zone>.
+
+What: /sys/class/backlight/<backlight>/ambient_light_level
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Get conversion value of the light sensor.
+ This value is updated every 80 ms (when the light sensor
+ is enabled). Returns integer between 0 (dark) and
+ 8000 (max ambient brightness)
+
+What: /sys/class/backlight/<backlight>/ambient_light_zone
+Date: Mai 2011
+KernelVersion: 2.6.40
+Contact: device-drivers-devel@blackfin.uclinux.org
+Description:
+ Get/Set current ambient light zone. Reading returns
+ integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark).
+ Writing a value between 1..5 forces the backlight controller
+ to enter the corresponding ambient light zone.
+ Writing 0 returns to normal/automatic ambient light level
+ operation. The ambient light sensing feature on these devices
+ is an extension to the API documented in
+ Documentation/ABI/stable/sysfs-class-backlight.
+ It can be enabled by writing the value stored in
+ /sys/class/backlight/<backlight>/max_brightness to
+ /sys/class/backlight/<backlight>/brightness.
\ No newline at end of file
diff --git a/Documentation/Changes b/Documentation/Changes
index 5f4828a0..b175808 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -2,13 +2,7 @@
=====
This document is designed to provide a list of the minimum levels of
-software necessary to run the 2.6 kernels, as well as provide brief
-instructions regarding any other "Gotchas" users may encounter when
-trying life on the Bleeding Edge. If upgrading from a pre-2.4.x
-kernel, please consult the Changes file included with 2.4.x kernels for
-additional information; most of that information will not be repeated
-here. Basically, this document assumes that your system is already
-functional and running at least 2.4.x kernels.
+software necessary to run the 3.0 kernels.
This document is originally based on my "Changes" file for 2.0.x kernels
and therefore owes credit to the same people as that file (Jared Mauch,
@@ -22,11 +16,10 @@
encountered a bug! If you're unsure what version you're currently
running, the suggested command should tell you.
-Again, keep in mind that this list assumes you are already
-functionally running a Linux 2.4 kernel. Also, not all tools are
-necessary on all systems; obviously, if you don't have any ISDN
-hardware, for example, you probably needn't concern yourself with
-isdn4k-utils.
+Again, keep in mind that this list assumes you are already functionally
+running a Linux kernel. Also, not all tools are necessary on all
+systems; obviously, if you don't have any ISDN hardware, for example,
+you probably needn't concern yourself with isdn4k-utils.
o Gnu C 3.2 # gcc --version
o Gnu make 3.80 # make --version
@@ -114,12 +107,12 @@
If the unthinkable happens and your kernel oopses, you may need the
ksymoops tool to decode it, but in most cases you don't.
-In the 2.6 kernel it is generally preferred to build the kernel with
-CONFIG_KALLSYMS so that it produces readable dumps that can be used as-is
-(this also produces better output than ksymoops).
-If for some reason your kernel is not build with CONFIG_KALLSYMS and
-you have no way to rebuild and reproduce the Oops with that option, then
-you can still decode that Oops with ksymoops.
+It is generally preferred to build the kernel with CONFIG_KALLSYMS so
+that it produces readable dumps that can be used as-is (this also
+produces better output than ksymoops). If for some reason your kernel
+is not build with CONFIG_KALLSYMS and you have no way to rebuild and
+reproduce the Oops with that option, then you can still decode that Oops
+with ksymoops.
Module-Init-Tools
-----------------
@@ -261,8 +254,8 @@
NFS-utils
---------
-In 2.4 and earlier kernels, the nfs server needed to know about any
-client that expected to be able to access files via NFS. This
+In ancient (2.4 and earlier) kernels, the nfs server needed to know
+about any client that expected to be able to access files via NFS. This
information would be given to the kernel by "mountd" when the client
mounted the filesystem, or by "exportfs" at system startup. exportfs
would take information about active clients from /var/lib/nfs/rmtab.
@@ -272,11 +265,11 @@
fail-over. Even when the system is working well, rmtab suffers from
getting lots of old entries that never get removed.
-With 2.6 we have the option of having the kernel tell mountd when it
-gets a request from an unknown host, and mountd can give appropriate
-export information to the kernel. This removes the dependency on
-rmtab and means that the kernel only needs to know about currently
-active clients.
+With modern kernels we have the option of having the kernel tell mountd
+when it gets a request from an unknown host, and mountd can give
+appropriate export information to the kernel. This removes the
+dependency on rmtab and means that the kernel only needs to know about
+currently active clients.
To enable this new functionality, you need to:
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index 58b0bf9..fa6e25b 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -680,8 +680,8 @@
Chapter 14: Allocating memory
The kernel provides the following general purpose memory allocators:
-kmalloc(), kzalloc(), kcalloc(), and vmalloc(). Please refer to the API
-documentation for further information about them.
+kmalloc(), kzalloc(), kcalloc(), vmalloc(), and vzalloc(). Please refer to
+the API documentation for further information about them.
The preferred form for passing a size of a struct is the following:
diff --git a/Documentation/accounting/cgroupstats.txt b/Documentation/accounting/cgroupstats.txt
index eda40fd..d16a984 100644
--- a/Documentation/accounting/cgroupstats.txt
+++ b/Documentation/accounting/cgroupstats.txt
@@ -21,7 +21,7 @@
To extract cgroup statistics a utility very similar to getdelays.c
has been developed, the sample output of the utility is shown below
-~/balbir/cgroupstats # ./getdelays -C "/cgroup/a"
+~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup/a"
sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0
-~/balbir/cgroupstats # ./getdelays -C "/cgroup"
+~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup"
sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2
diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt
index 465351d..84f0a15 100644
--- a/Documentation/cgroups/blkio-controller.txt
+++ b/Documentation/cgroups/blkio-controller.txt
@@ -28,16 +28,19 @@
- Enable group scheduling in CFQ
CONFIG_CFQ_GROUP_IOSCHED=y
-- Compile and boot into kernel and mount IO controller (blkio).
+- Compile and boot into kernel and mount IO controller (blkio); see
+ cgroups.txt, Why are cgroups needed?.
- mount -t cgroup -o blkio none /cgroup
+ mount -t tmpfs cgroup_root /sys/fs/cgroup
+ mkdir /sys/fs/cgroup/blkio
+ mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
- Create two cgroups
- mkdir -p /cgroup/test1/ /cgroup/test2
+ mkdir -p /sys/fs/cgroup/blkio/test1/ /sys/fs/cgroup/blkio/test2
- Set weights of group test1 and test2
- echo 1000 > /cgroup/test1/blkio.weight
- echo 500 > /cgroup/test2/blkio.weight
+ echo 1000 > /sys/fs/cgroup/blkio/test1/blkio.weight
+ echo 500 > /sys/fs/cgroup/blkio/test2/blkio.weight
- Create two same size files (say 512MB each) on same disk (file1, file2) and
launch two dd threads in different cgroup to read those files.
@@ -46,12 +49,12 @@
echo 3 > /proc/sys/vm/drop_caches
dd if=/mnt/sdb/zerofile1 of=/dev/null &
- echo $! > /cgroup/test1/tasks
- cat /cgroup/test1/tasks
+ echo $! > /sys/fs/cgroup/blkio/test1/tasks
+ cat /sys/fs/cgroup/blkio/test1/tasks
dd if=/mnt/sdb/zerofile2 of=/dev/null &
- echo $! > /cgroup/test2/tasks
- cat /cgroup/test2/tasks
+ echo $! > /sys/fs/cgroup/blkio/test2/tasks
+ cat /sys/fs/cgroup/blkio/test2/tasks
- At macro level, first dd should finish first. To get more precise data, keep
on looking at (with the help of script), at blkio.disk_time and
@@ -68,13 +71,13 @@
- Enable throttling in block layer
CONFIG_BLK_DEV_THROTTLING=y
-- Mount blkio controller
- mount -t cgroup -o blkio none /cgroup/blkio
+- Mount blkio controller (see cgroups.txt, Why are cgroups needed?)
+ mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
- Specify a bandwidth rate on particular device for root group. The format
for policy is "<major>:<minor> <byes_per_second>".
- echo "8:16 1048576" > /cgroup/blkio/blkio.read_bps_device
+ echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
Above will put a limit of 1MB/second on reads happening for root group
on device having major/minor number 8:16.
@@ -87,7 +90,7 @@
1024+0 records out
4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s
- Limits for writes can be put using blkio.write_bps_device file.
+ Limits for writes can be put using blkio.throttle.write_bps_device file.
Hierarchical Cgroups
====================
@@ -108,7 +111,7 @@
CFQ and throttling will practically treat all groups at same level.
pivot
- / | \ \
+ / / \ \
root test1 test2 test3
Down the line we can implement hierarchical accounting/control support
@@ -149,7 +152,7 @@
Following is the format.
- #echo dev_maj:dev_minor weight > /path/to/cgroup/blkio.weight_device
+ # echo dev_maj:dev_minor weight > blkio.weight_device
Configure weight=300 on /dev/sdb (8:16) in this cgroup
# echo 8:16 300 > blkio.weight_device
# cat blkio.weight_device
@@ -283,28 +286,28 @@
specified in bytes per second. Rules are per deivce. Following is
the format.
- echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.read_bps_device
+ echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
- blkio.throttle.write_bps_device
- Specifies upper limit on WRITE rate to the device. IO rate is
specified in bytes per second. Rules are per deivce. Following is
the format.
- echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.write_bps_device
+ echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
- blkio.throttle.read_iops_device
- Specifies upper limit on READ rate from the device. IO rate is
specified in IO per second. Rules are per deivce. Following is
the format.
- echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.read_iops_device
+ echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
- blkio.throttle.write_iops_device
- Specifies upper limit on WRITE rate to the device. IO rate is
specified in io per second. Rules are per deivce. Following is
the format.
- echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.write_iops_device
+ echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
Note: If both BW and IOPS rules are specified for a device, then IO is
subjectd to both the constraints.
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index 0ed99f0..cd67e90 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -138,11 +138,11 @@
the admin can easily set up a script which receives exec notifications
and depending on who is launching the browser he can
- # echo browser_pid > /mnt/<restype>/<userclass>/tasks
+ # echo browser_pid > /sys/fs/cgroup/<restype>/<userclass>/tasks
With only a single hierarchy, he now would potentially have to create
a separate cgroup for every browser launched and associate it with
-approp network and other resource class. This may lead to
+appropriate network and other resource class. This may lead to
proliferation of such cgroups.
Also lets say that the administrator would like to give enhanced network
@@ -153,9 +153,9 @@
With ability to write pids directly to resource classes, it's just a
matter of :
- # echo pid > /mnt/network/<new_class>/tasks
+ # echo pid > /sys/fs/cgroup/network/<new_class>/tasks
(after some time)
- # echo pid > /mnt/network/<orig_class>/tasks
+ # echo pid > /sys/fs/cgroup/network/<orig_class>/tasks
Without this ability, he would have to split the cgroup into
multiple separate ones and then associate the new cgroups with the
@@ -310,21 +310,24 @@
To start a new job that is to be contained within a cgroup, using
the "cpuset" cgroup subsystem, the steps are something like:
- 1) mkdir /dev/cgroup
- 2) mount -t cgroup -ocpuset cpuset /dev/cgroup
- 3) Create the new cgroup by doing mkdir's and write's (or echo's) in
- the /dev/cgroup virtual file system.
- 4) Start a task that will be the "founding father" of the new job.
- 5) Attach that task to the new cgroup by writing its pid to the
- /dev/cgroup tasks file for that cgroup.
- 6) fork, exec or clone the job tasks from this founding father task.
+ 1) mount -t tmpfs cgroup_root /sys/fs/cgroup
+ 2) mkdir /sys/fs/cgroup/cpuset
+ 3) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
+ 4) Create the new cgroup by doing mkdir's and write's (or echo's) in
+ the /sys/fs/cgroup virtual file system.
+ 5) Start a task that will be the "founding father" of the new job.
+ 6) Attach that task to the new cgroup by writing its pid to the
+ /sys/fs/cgroup/cpuset/tasks file for that cgroup.
+ 7) fork, exec or clone the job tasks from this founding father task.
For example, the following sequence of commands will setup a cgroup
named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
and then start a subshell 'sh' in that cgroup:
- mount -t cgroup cpuset -ocpuset /dev/cgroup
- cd /dev/cgroup
+ mount -t tmpfs cgroup_root /sys/fs/cgroup
+ mkdir /sys/fs/cgroup/cpuset
+ mount -t cgroup cpuset -ocpuset /sys/fs/cgroup/cpuset
+ cd /sys/fs/cgroup/cpuset
mkdir Charlie
cd Charlie
/bin/echo 2-3 > cpuset.cpus
@@ -345,7 +348,7 @@
virtual filesystem.
To mount a cgroup hierarchy with all available subsystems, type:
-# mount -t cgroup xxx /dev/cgroup
+# mount -t cgroup xxx /sys/fs/cgroup
The "xxx" is not interpreted by the cgroup code, but will appear in
/proc/mounts so may be any useful identifying string that you like.
@@ -354,23 +357,32 @@
if cpusets are enabled the user will have to populate the cpus and mems files
for each new cgroup created before that group can be used.
+As explained in section `1.2 Why are cgroups needed?' you should create
+different hierarchies of cgroups for each single resource or group of
+resources you want to control. Therefore, you should mount a tmpfs on
+/sys/fs/cgroup and create directories for each cgroup resource or resource
+group.
+
+# mount -t tmpfs cgroup_root /sys/fs/cgroup
+# mkdir /sys/fs/cgroup/rg1
+
To mount a cgroup hierarchy with just the cpuset and memory
subsystems, type:
-# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup
+# mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1
To change the set of subsystems bound to a mounted hierarchy, just
remount with different options:
-# mount -o remount,cpuset,blkio hier1 /dev/cgroup
+# mount -o remount,cpuset,blkio hier1 /sys/fs/cgroup/rg1
Now memory is removed from the hierarchy and blkio is added.
Note this will add blkio to the hierarchy but won't remove memory or
cpuset, because the new options are appended to the old ones:
-# mount -o remount,blkio /dev/cgroup
+# mount -o remount,blkio /sys/fs/cgroup/rg1
To Specify a hierarchy's release_agent:
# mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \
- xxx /dev/cgroup
+ xxx /sys/fs/cgroup/rg1
Note that specifying 'release_agent' more than once will return failure.
@@ -379,17 +391,17 @@
the ability to arbitrarily bind/unbind subsystems from an existing
cgroup hierarchy is intended to be implemented in the future.
-Then under /dev/cgroup you can find a tree that corresponds to the
-tree of the cgroups in the system. For instance, /dev/cgroup
+Then under /sys/fs/cgroup/rg1 you can find a tree that corresponds to the
+tree of the cgroups in the system. For instance, /sys/fs/cgroup/rg1
is the cgroup that holds the whole system.
If you want to change the value of release_agent:
-# echo "/sbin/new_release_agent" > /dev/cgroup/release_agent
+# echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent
It can also be changed via remount.
-If you want to create a new cgroup under /dev/cgroup:
-# cd /dev/cgroup
+If you want to create a new cgroup under /sys/fs/cgroup/rg1:
+# cd /sys/fs/cgroup/rg1
# mkdir my_cgroup
Now you want to do something with this cgroup.
diff --git a/Documentation/cgroups/cpuacct.txt b/Documentation/cgroups/cpuacct.txt
index 8b93094..9ad85df 100644
--- a/Documentation/cgroups/cpuacct.txt
+++ b/Documentation/cgroups/cpuacct.txt
@@ -10,26 +10,25 @@
Accounting groups can be created by first mounting the cgroup filesystem.
-# mkdir /cgroups
-# mount -t cgroup -ocpuacct none /cgroups
+# mount -t cgroup -ocpuacct none /sys/fs/cgroup
-With the above step, the initial or the parent accounting group
-becomes visible at /cgroups. At bootup, this group includes all the
-tasks in the system. /cgroups/tasks lists the tasks in this cgroup.
-/cgroups/cpuacct.usage gives the CPU time (in nanoseconds) obtained by
-this group which is essentially the CPU time obtained by all the tasks
+With the above step, the initial or the parent accounting group becomes
+visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in
+the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup.
+/sys/fs/cgroup/cpuacct.usage gives the CPU time (in nanoseconds) obtained
+by this group which is essentially the CPU time obtained by all the tasks
in the system.
-New accounting groups can be created under the parent group /cgroups.
+New accounting groups can be created under the parent group /sys/fs/cgroup.
-# cd /cgroups
+# cd /sys/fs/cgroup
# mkdir g1
# echo $$ > g1
The above steps create a new group g1 and move the current shell
process (bash) into it. CPU time consumed by this bash and its children
can be obtained from g1/cpuacct.usage and the same is accumulated in
-/cgroups/cpuacct.usage also.
+/sys/fs/cgroup/cpuacct.usage also.
cpuacct.stat file lists a few statistics which further divide the
CPU time obtained by the cgroup into user and system times. Currently
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index 98a3082..5b0d78e 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -661,21 +661,21 @@
To start a new job that is to be contained within a cpuset, the steps are:
- 1) mkdir /dev/cpuset
- 2) mount -t cgroup -ocpuset cpuset /dev/cpuset
+ 1) mkdir /sys/fs/cgroup/cpuset
+ 2) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
3) Create the new cpuset by doing mkdir's and write's (or echo's) in
- the /dev/cpuset virtual file system.
+ the /sys/fs/cgroup/cpuset virtual file system.
4) Start a task that will be the "founding father" of the new job.
5) Attach that task to the new cpuset by writing its pid to the
- /dev/cpuset tasks file for that cpuset.
+ /sys/fs/cgroup/cpuset tasks file for that cpuset.
6) fork, exec or clone the job tasks from this founding father task.
For example, the following sequence of commands will setup a cpuset
named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
and then start a subshell 'sh' in that cpuset:
- mount -t cgroup -ocpuset cpuset /dev/cpuset
- cd /dev/cpuset
+ mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
+ cd /sys/fs/cgroup/cpuset
mkdir Charlie
cd Charlie
/bin/echo 2-3 > cpuset.cpus
@@ -710,14 +710,14 @@
virtual filesystem.
To mount it, type:
-# mount -t cgroup -o cpuset cpuset /dev/cpuset
+# mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset
-Then under /dev/cpuset you can find a tree that corresponds to the
-tree of the cpusets in the system. For instance, /dev/cpuset
+Then under /sys/fs/cgroup/cpuset you can find a tree that corresponds to the
+tree of the cpusets in the system. For instance, /sys/fs/cgroup/cpuset
is the cpuset that holds the whole system.
-If you want to create a new cpuset under /dev/cpuset:
-# cd /dev/cpuset
+If you want to create a new cpuset under /sys/fs/cgroup/cpuset:
+# cd /sys/fs/cgroup/cpuset
# mkdir my_cpuset
Now you want to do something with this cpuset.
@@ -765,12 +765,12 @@
The command
-mount -t cpuset X /dev/cpuset
+mount -t cpuset X /sys/fs/cgroup/cpuset
is equivalent to
-mount -t cgroup -ocpuset,noprefix X /dev/cpuset
-echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
+mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset
+echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent
2.2 Adding/removing cpus
------------------------
diff --git a/Documentation/cgroups/devices.txt b/Documentation/cgroups/devices.txt
index 57ca4c8..16624a7f8 100644
--- a/Documentation/cgroups/devices.txt
+++ b/Documentation/cgroups/devices.txt
@@ -22,16 +22,16 @@
An entry is added using devices.allow, and removed using
devices.deny. For instance
- echo 'c 1:3 mr' > /cgroups/1/devices.allow
+ echo 'c 1:3 mr' > /sys/fs/cgroup/1/devices.allow
allows cgroup 1 to read and mknod the device usually known as
/dev/null. Doing
- echo a > /cgroups/1/devices.deny
+ echo a > /sys/fs/cgroup/1/devices.deny
will remove the default 'a *:* rwm' entry. Doing
- echo a > /cgroups/1/devices.allow
+ echo a > /sys/fs/cgroup/1/devices.allow
will add the 'a *:* rwm' entry to the whitelist.
diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt
index 41f37fe..c21d777 100644
--- a/Documentation/cgroups/freezer-subsystem.txt
+++ b/Documentation/cgroups/freezer-subsystem.txt
@@ -59,28 +59,28 @@
* Examples of usage :
- # mkdir /containers
- # mount -t cgroup -ofreezer freezer /containers
- # mkdir /containers/0
- # echo $some_pid > /containers/0/tasks
+ # mkdir /sys/fs/cgroup/freezer
+ # mount -t cgroup -ofreezer freezer /sys/fs/cgroup/freezer
+ # mkdir /sys/fs/cgroup/freezer/0
+ # echo $some_pid > /sys/fs/cgroup/freezer/0/tasks
to get status of the freezer subsystem :
- # cat /containers/0/freezer.state
+ # cat /sys/fs/cgroup/freezer/0/freezer.state
THAWED
to freeze all tasks in the container :
- # echo FROZEN > /containers/0/freezer.state
- # cat /containers/0/freezer.state
+ # echo FROZEN > /sys/fs/cgroup/freezer/0/freezer.state
+ # cat /sys/fs/cgroup/freezer/0/freezer.state
FREEZING
- # cat /containers/0/freezer.state
+ # cat /sys/fs/cgroup/freezer/0/freezer.state
FROZEN
to unfreeze all tasks in the container :
- # echo THAWED > /containers/0/freezer.state
- # cat /containers/0/freezer.state
+ # echo THAWED > /sys/fs/cgroup/freezer/0/freezer.state
+ # cat /sys/fs/cgroup/freezer/0/freezer.state
THAWED
This is the basic mechanism which should do the right thing for user space task
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 7c16347..06eb6d9 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -1,8 +1,8 @@
Memory Resource Controller
-NOTE: The Memory Resource Controller has been generically been referred
- to as the memory controller in this document. Do not confuse memory
- controller used here with the memory controller that is used in hardware.
+NOTE: The Memory Resource Controller has generically been referred to as the
+ memory controller in this document. Do not confuse memory controller
+ used here with the memory controller that is used in hardware.
(For editors)
In this document:
@@ -70,6 +70,7 @@
(See sysctl's vm.swappiness)
memory.move_charge_at_immigrate # set/show controls of moving charges
memory.oom_control # set/show oom controls.
+ memory.numa_stat # show the number of memory usage per numa node
1. History
@@ -181,7 +182,7 @@
page will eventually get charged for it (once it is uncharged from
the cgroup that brought it in -- this will happen on memory pressure).
-Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used..
+Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used.
When you do swapoff and make swapped-out pages of shmem(tmpfs) to
be backed into memory in force, charges for pages are accounted against the
caller of swapoff rather than the users of shmem.
@@ -213,7 +214,7 @@
OS point of view.
* What happens when a cgroup hits memory.memsw.limit_in_bytes
-When a cgroup his memory.memsw.limit_in_bytes, it's useless to do swap-out
+When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out
in this cgroup. Then, swap-out will not be done by cgroup routine and file
caches are dropped. But as mentioned above, global LRU can do swapout memory
from it for sanity of the system's memory management state. You can't forbid
@@ -263,16 +264,17 @@
c. Enable CONFIG_CGROUP_MEM_RES_CTLR
d. Enable CONFIG_CGROUP_MEM_RES_CTLR_SWAP (to use swap extension)
-1. Prepare the cgroups
-# mkdir -p /cgroups
-# mount -t cgroup none /cgroups -o memory
+1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?)
+# mount -t tmpfs none /sys/fs/cgroup
+# mkdir /sys/fs/cgroup/memory
+# mount -t cgroup none /sys/fs/cgroup/memory -o memory
2. Make the new group and move bash into it
-# mkdir /cgroups/0
-# echo $$ > /cgroups/0/tasks
+# mkdir /sys/fs/cgroup/memory/0
+# echo $$ > /sys/fs/cgroup/memory/0/tasks
Since now we're in the 0 cgroup, we can alter the memory limit:
-# echo 4M > /cgroups/0/memory.limit_in_bytes
+# echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes
NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.)
@@ -280,11 +282,11 @@
NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
NOTE: We cannot set limits on the root cgroup any more.
-# cat /cgroups/0/memory.limit_in_bytes
+# cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes
4194304
We can check the usage:
-# cat /cgroups/0/memory.usage_in_bytes
+# cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes
1216512
A successful write to this file does not guarantee a successful set of
@@ -464,6 +466,24 @@
If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
value in memory.stat(see 5.2).
+5.6 numa_stat
+
+This is similar to numa_maps but operates on a per-memcg basis. This is
+useful for providing visibility into the numa locality information within
+an memcg since the pages are allowed to be allocated from any physical
+node. One of the usecases is evaluating application performance by
+combining this information with the application's cpu allocation.
+
+We export "total", "file", "anon" and "unevictable" pages per-node for
+each memcg. The ouput format of memory.numa_stat is:
+
+total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
+file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
+anon=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+unevictable=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+
+And we have total = file + anon + unevictable.
+
6. Hierarchy support
The memory controller supports a deep hierarchy and hierarchical accounting.
@@ -471,13 +491,13 @@
cgroup filesystem. Consider for example, the following cgroup filesystem
hierarchy
- root
+ root
/ | \
- / | \
- a b c
- | \
- | \
- d e
+ / | \
+ a b c
+ | \
+ | \
+ d e
In the diagram above, with hierarchical accounting enabled, all memory
usage of e, is accounted to its ancestors up until the root (i.e, c and root),
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 1a9446b..b1c921c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -481,23 +481,6 @@
----------------------------
-What: namespace cgroup (ns_cgroup)
-When: 2.6.38
-Why: The ns_cgroup leads to some problems:
- * cgroup creation is out-of-control
- * cgroup name can conflict when pids are looping
- * it is not possible to have a single process handling
- a lot of namespaces without falling in a exponential creation time
- * we may want to create a namespace without creating a cgroup
-
- The ns_cgroup is replaced by a compatibility flag 'clone_children',
- where a newly created cgroup will copy the parent cgroup values.
- The userspace has to manually create a cgroup and add a task to
- the 'tasks' file.
-Who: Daniel Lezcano <daniel.lezcano@free.fr>
-
-----------------------------
-
What: iwlwifi disable_hw_scan module parameters
When: 2.6.40
Why: Hareware scan is the prefer method for iwlwifi devices for
@@ -600,3 +583,25 @@
Who: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
----------------------------
+
+What: For VIDIOC_S_FREQUENCY the type field must match the device node's type.
+ If not, return -EINVAL.
+When: 3.2
+Why: It makes no sense to switch the tuner to radio mode by calling
+ VIDIOC_S_FREQUENCY on a video node, or to switch the tuner to tv mode by
+ calling VIDIOC_S_FREQUENCY on a radio node. This is the first step of a
+ move to more consistent handling of tv and radio tuners.
+Who: Hans Verkuil <hans.verkuil@cisco.com>
+
+----------------------------
+
+What: Opening a radio device node will no longer automatically switch the
+ tuner mode from tv to radio.
+When: 3.3
+Why: Just opening a V4L device should not change the state of the hardware
+ like that. It's very unexpected and against the V4L spec. Instead, you
+ switch to radio mode by calling VIDIOC_S_FREQUENCY. This is the second
+ and last step of the move to consistent handling of tv and radio tuners.
+Who: Hans Verkuil <hans.verkuil@cisco.com>
+
+----------------------------
diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt
index a167ab8..7cc6bf2 100644
--- a/Documentation/filesystems/caching/netfs-api.txt
+++ b/Documentation/filesystems/caching/netfs-api.txt
@@ -673,6 +673,22 @@
in which case the page will not be stored in the cache this time.
+BULK INODE PAGE UNCACHE
+-----------------------
+
+A convenience routine is provided to perform an uncache on all the pages
+attached to an inode. This assumes that the pages on the inode correspond on a
+1:1 basis with the pages in the cache.
+
+ void fscache_uncache_all_inode_pages(struct fscache_cookie *cookie,
+ struct inode *inode);
+
+This takes the netfs cookie that the pages were cached with and the inode that
+the pages are attached to. This function will wait for pages to finish being
+written to the cache and for the cache to finish with the page generally. No
+error is returned.
+
+
==========================
INDEX AND DATA FILE UPDATE
==========================
diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt
index d5c0cef..873a2ab 100644
--- a/Documentation/filesystems/nilfs2.txt
+++ b/Documentation/filesystems/nilfs2.txt
@@ -40,7 +40,6 @@
- POSIX ACLs
- quotas
- fsck
- - resize
- defragmentation
Mount options
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index f481780..db3b1ab 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -843,6 +843,7 @@
TASKLET: 0 0 0 290
SCHED: 27035 26983 26971 26746
HRTIMER: 0 0 0 0
+ RCU: 1678 1769 2178 2250
1.3 IDE devices in /proc/ide
diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg
index 84d2623..de91c0d 100644
--- a/Documentation/hwmon/f71882fg
+++ b/Documentation/hwmon/f71882fg
@@ -22,6 +22,10 @@
Prefix: 'f71869'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
+ * Fintek F71869A
+ Prefix: 'f71869a'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: Not public
* Fintek F71882FG and F71883FG
Prefix: 'f71882fg'
Addresses scanned: none, address read from Super I/O config space
diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
index 0393c89..a10f736 100644
--- a/Documentation/hwmon/k10temp
+++ b/Documentation/hwmon/k10temp
@@ -9,8 +9,8 @@
Socket S1G3: Athlon II, Sempron, Turion II
* AMD Family 11h processors:
Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
-* AMD Family 12h processors: "Llano"
-* AMD Family 14h processors: "Brazos" (C/E/G-Series)
+* AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
+* AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
* AMD Family 15h processors: "Bulldozer"
Prefix: 'k10temp'
@@ -20,12 +20,16 @@
http://support.amd.com/us/Processor_TechDocs/31116.pdf
BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41256.pdf
+ BIOS and Kernel Developer's Guide (BKDG) for AMD Family 12h Processors:
+ http://support.amd.com/us/Processor_TechDocs/41131.pdf
BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
http://support.amd.com/us/Processor_TechDocs/43170.pdf
Revision Guide for AMD Family 10h Processors:
http://support.amd.com/us/Processor_TechDocs/41322.pdf
Revision Guide for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41788.pdf
+ Revision Guide for AMD Family 12h Processors:
+ http://support.amd.com/us/Processor_TechDocs/44739.pdf
Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
http://support.amd.com/us/Processor_TechDocs/47534.pdf
AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d9a203b..aa47be7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2015,6 +2015,8 @@
the default.
off: Turn ECRC off
on: Turn ECRC on.
+ realloc reallocate PCI resources if allocations done by BIOS
+ are erroneous.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.
@@ -2598,6 +2600,8 @@
unlock ejectable media);
m = MAX_SECTORS_64 (don't transfer more
than 64 sectors = 32 KB at a time);
+ n = INITIAL_READ10 (force a retry of the
+ initial READ(10) command);
o = CAPACITY_OK (accept the capacity
reported by the device);
r = IGNORE_RESIDUE (the device reports
diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
index 090e6ee..51063e6 100644
--- a/Documentation/kmemleak.txt
+++ b/Documentation/kmemleak.txt
@@ -11,7 +11,9 @@
reported via /sys/kernel/debug/kmemleak. A similar method is used by the
Valgrind tool (memcheck --leak-check) to detect the memory leaks in
user-space applications.
-Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile.
+
+Please check DEBUG_KMEMLEAK dependencies in lib/Kconfig.debug for supported
+architectures.
Usage
-----
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 1565eefd..6181548 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -534,6 +534,8 @@
0x2404 System is waking up from hibernation to undock
0x2405 System is waking up from hibernation to eject bay
0x5010 Brightness level changed/control event
+0x6000 KEYBOARD: Numlock key pressed
+0x6005 KEYBOARD: Fn key pressed (TO BE VERIFIED)
Events that are propagated by the driver to userspace:
@@ -545,6 +547,8 @@
0x3006 Bay hotplug request (hint to power up SATA link when
the optical drive tray is ejected)
0x4003 Undocked (see 0x2x04), can sleep again
+0x4010 Docked into hotplug port replicator (non-ACPI dock)
+0x4011 Undocked from hotplug port replicator (non-ACPI dock)
0x500B Tablet pen inserted into its storage bay
0x500C Tablet pen removed from its storage bay
0x6011 ALARM: battery is too hot
@@ -552,6 +556,7 @@
0x6021 ALARM: a sensor is too hot
0x6022 ALARM: a sensor is extremely hot
0x6030 System thermal table changed
+0x6040 Nvidia Optimus/AC adapter related (TO BE VERIFIED)
Battery nearly empty alarms are a last resort attempt to get the
operating system to hibernate or shutdown cleanly (0x2313), or shutdown
diff --git a/Documentation/md.txt b/Documentation/md.txt
index 2366b1c..f0eee83 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -555,7 +555,7 @@
sync_min
sync_max
The two values, given as numbers of sectors, indicate a range
- withing the array where 'check'/'repair' will operate. Must be
+ within the array where 'check'/'repair' will operate. Must be
a multiple of chunk_size. When it reaches "sync_max" it will
pause, rather than complete.
You can use 'select' or 'poll' on "sync_completed" to wait for
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index d3d653a..bfe9242 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -346,7 +346,7 @@
when RTO retransmissions remain unacknowledged.
See tcp_retries2 for more details.
- The default value is 7.
+ The default value is 8.
If your machine is a loaded WEB server,
you should think about lowering this value, such sockets
may consume significant resources. Cf. tcp_max_orphans.
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 8888083..64565aa 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -520,59 +520,20 @@
device. This field is a pointer to an object of type struct dev_power_domain,
defined in include/linux/pm.h, providing a set of power management callbacks
analogous to the subsystem-level and device driver callbacks that are executed
-for the given device during all power transitions, in addition to the respective
-subsystem-level callbacks. Specifically, the power domain "suspend" callbacks
-(i.e. ->runtime_suspend(), ->suspend(), ->freeze(), ->poweroff(), etc.) are
-executed after the analogous subsystem-level callbacks, while the power domain
-"resume" callbacks (i.e. ->runtime_resume(), ->resume(), ->thaw(), ->restore,
-etc.) are executed before the analogous subsystem-level callbacks. Error codes
-returned by the "suspend" and "resume" power domain callbacks are ignored.
+for the given device during all power transitions, instead of the respective
+subsystem-level callbacks. Specifically, if a device's pm_domain pointer is
+not NULL, the ->suspend() callback from the object pointed to by it will be
+executed instead of its subsystem's (e.g. bus type's) ->suspend() callback and
+anlogously for all of the remaining callbacks. In other words, power management
+domain callbacks, if defined for the given device, always take precedence over
+the callbacks provided by the device's subsystem (e.g. bus type).
-Power domain ->runtime_idle() callback is executed before the subsystem-level
-->runtime_idle() callback and the result returned by it is not ignored. Namely,
-if it returns error code, the subsystem-level ->runtime_idle() callback will not
-be called and the helper function rpm_idle() executing it will return error
-code. This mechanism is intended to help platforms where saving device state
-is a time consuming operation and should only be carried out if all devices
-in the power domain are idle, before turning off the shared power resource(s).
-Namely, the power domain ->runtime_idle() callback may return error code until
-the pm_runtime_idle() helper (or its asychronous version) has been called for
-all devices in the power domain (it is recommended that the returned error code
-be -EBUSY in those cases), preventing the subsystem-level ->runtime_idle()
-callback from being run prematurely.
-
-The support for device power domains is only relevant to platforms needing to
-use the same subsystem-level (e.g. platform bus type) and device driver power
-management callbacks in many different power domain configurations and wanting
-to avoid incorporating the support for power domains into the subsystem-level
-callbacks. The other platforms need not implement it or take it into account
-in any way.
-
-
-System Devices
---------------
-System devices (sysdevs) follow a slightly different API, which can be found in
-
- include/linux/sysdev.h
- drivers/base/sys.c
-
-System devices will be suspended with interrupts disabled, and after all other
-devices have been suspended. On resume, they will be resumed before any other
-devices, and also with interrupts disabled. These things occur in special
-"sysdev_driver" phases, which affect only system devices.
-
-Thus, after the suspend_noirq (or freeze_noirq or poweroff_noirq) phase, when
-the non-boot CPUs are all offline and IRQs are disabled on the remaining online
-CPU, then a sysdev_driver.suspend phase is carried out, and the system enters a
-sleep state (or a system image is created). During resume (or after the image
-has been created or loaded) a sysdev_driver.resume phase is carried out, IRQs
-are enabled on the only online CPU, the non-boot CPUs are enabled, and the
-resume_noirq (or thaw_noirq or restore_noirq) phase begins.
-
-Code to actually enter and exit the system-wide low power state sometimes
-involves hardware details that are only known to the boot firmware, and
-may leave a CPU running software (from SRAM or flash memory) that monitors
-the system and manages its wakeup sequence.
+The support for device power management domains is only relevant to platforms
+needing to use the same device driver power management callbacks in many
+different power domain configurations and wanting to avoid incorporating the
+support for power domains into subsystem-level callbacks, for example by
+modifying the platform bus type. Other platforms need not implement it or take
+it into account in any way.
Device Low Power (suspend) States
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 654097b..b24875b 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -501,13 +501,29 @@
should be used. Of course, for this purpose the device's run-time PM has to be
enabled earlier by calling pm_runtime_enable().
-If the device bus type's or driver's ->probe() or ->remove() callback runs
+If the device bus type's or driver's ->probe() callback runs
pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts,
they will fail returning -EAGAIN, because the device's usage counter is
-incremented by the core before executing ->probe() and ->remove(). Still, it
-may be desirable to suspend the device as soon as ->probe() or ->remove() has
-finished, so the PM core uses pm_runtime_idle_sync() to invoke the
-subsystem-level idle callback for the device at that time.
+incremented by the driver core before executing ->probe(). Still, it may be
+desirable to suspend the device as soon as ->probe() has finished, so the driver
+core uses pm_runtime_put_sync() to invoke the subsystem-level idle callback for
+the device at that time.
+
+Moreover, the driver core prevents runtime PM callbacks from racing with the bus
+notifier callback in __device_release_driver(), which is necessary, because the
+notifier is used by some subsystems to carry out operations affecting the
+runtime PM functionality. It does so by calling pm_runtime_get_sync() before
+driver_sysfs_remove() and the BUS_NOTIFY_UNBIND_DRIVER notifications. This
+resumes the device if it's in the suspended state and prevents it from
+being suspended again while those routines are being executed.
+
+To allow bus types and drivers to put devices into the suspended state by
+calling pm_runtime_suspend() from their ->remove() routines, the driver core
+executes pm_runtime_put_sync() after running the BUS_NOTIFY_UNBIND_DRIVER
+notifications in __device_release_driver(). This requires bus types and
+drivers to make their ->remove() callbacks avoid races with runtime PM directly,
+but also it allows of more flexibility in the handling of devices during the
+removal of their drivers.
The user space can effectively disallow the driver of the device to power manage
it at run time by changing the value of its /sys/devices/.../power/control
@@ -566,11 +582,6 @@
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
-The PM core always increments the run-time usage counter before calling the
-->prepare() callback and decrements it after calling the ->complete() callback.
-Hence disabling run-time PM temporarily like this will not cause any run-time
-suspend callbacks to be lost.
-
7. Generic subsystem callbacks
Subsystems may wish to conserve code space by using the set of generic power
diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt
index 1b5a5dd..5df176e 100644
--- a/Documentation/printk-formats.txt
+++ b/Documentation/printk-formats.txt
@@ -9,7 +9,121 @@
size_t %zu or %zx
ssize_t %zd or %zx
-Raw pointer value SHOULD be printed with %p.
+Raw pointer value SHOULD be printed with %p. The kernel supports
+the following extended format specifiers for pointer types:
+
+Symbols/Function Pointers:
+
+ %pF versatile_init+0x0/0x110
+ %pf versatile_init
+ %pS versatile_init+0x0/0x110
+ %ps versatile_init
+ %pB prev_fn_of_versatile_init+0x88/0x88
+
+ For printing symbols and function pointers. The 'S' and 's' specifiers
+ result in the symbol name with ('S') or without ('s') offsets. Where
+ this is used on a kernel without KALLSYMS - the symbol address is
+ printed instead.
+
+ The 'B' specifier results in the symbol name with offsets and should be
+ used when printing stack backtraces. The specifier takes into
+ consideration the effect of compiler optimisations which may occur
+ when tail-call's are used and marked with the noreturn GCC attribute.
+
+ On ia64, ppc64 and parisc64 architectures function pointers are
+ actually function descriptors which must first be resolved. The 'F' and
+ 'f' specifiers perform this resolution and then provide the same
+ functionality as the 'S' and 's' specifiers.
+
+Kernel Pointers:
+
+ %pK 0x01234567 or 0x0123456789abcdef
+
+ For printing kernel pointers which should be hidden from unprivileged
+ users. The behaviour of %pK depends on the kptr_restrict sysctl - see
+ Documentation/sysctl/kernel.txt for more details.
+
+Struct Resources:
+
+ %pr [mem 0x60000000-0x6fffffff flags 0x2200] or
+ [mem 0x0000000060000000-0x000000006fffffff flags 0x2200]
+ %pR [mem 0x60000000-0x6fffffff pref] or
+ [mem 0x0000000060000000-0x000000006fffffff pref]
+
+ For printing struct resources. The 'R' and 'r' specifiers result in a
+ printed resource with ('R') or without ('r') a decoded flags member.
+
+MAC/FDDI addresses:
+
+ %pM 00:01:02:03:04:05
+ %pMF 00-01-02-03-04-05
+ %pm 000102030405
+
+ For printing 6-byte MAC/FDDI addresses in hex notation. The 'M' and 'm'
+ specifiers result in a printed address with ('M') or without ('m') byte
+ separators. The default byte separator is the colon (':').
+
+ Where FDDI addresses are concerned the 'F' specifier can be used after
+ the 'M' specifier to use dash ('-') separators instead of the default
+ separator.
+
+IPv4 addresses:
+
+ %pI4 1.2.3.4
+ %pi4 001.002.003.004
+ %p[Ii][hnbl]
+
+ For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4'
+ specifiers result in a printed address with ('i4') or without ('I4')
+ leading zeros.
+
+ The additional 'h', 'n', 'b', and 'l' specifiers are used to specify
+ host, network, big or little endian order addresses respectively. Where
+ no specifier is provided the default network/big endian order is used.
+
+IPv6 addresses:
+
+ %pI6 0001:0002:0003:0004:0005:0006:0007:0008
+ %pi6 00010002000300040005000600070008
+ %pI6c 1:2:3:4:5:6:7:8
+
+ For printing IPv6 network-order 16-bit hex addresses. The 'I6' and 'i6'
+ specifiers result in a printed address with ('I6') or without ('i6')
+ colon-separators. Leading zeros are always used.
+
+ The additional 'c' specifier can be used with the 'I' specifier to
+ print a compressed IPv6 address as described by
+ http://tools.ietf.org/html/rfc5952
+
+UUID/GUID addresses:
+
+ %pUb 00010203-0405-0607-0809-0a0b0c0d0e0f
+ %pUB 00010203-0405-0607-0809-0A0B0C0D0E0F
+ %pUl 03020100-0504-0706-0809-0a0b0c0e0e0f
+ %pUL 03020100-0504-0706-0809-0A0B0C0E0E0F
+
+ For printing 16-byte UUID/GUIDs addresses. The additional 'l', 'L',
+ 'b' and 'B' specifiers are used to specify a little endian order in
+ lower ('l') or upper case ('L') hex characters - and big endian order
+ in lower ('b') or upper case ('B') hex characters.
+
+ Where no additional specifiers are used the default little endian
+ order with lower case hex characters will be printed.
+
+struct va_format:
+
+ %pV
+
+ For printing struct va_format structures. These contain a format string
+ and va_list as follows:
+
+ struct va_format {
+ const char *fmt;
+ va_list *va;
+ };
+
+ Do not use this feature without some mechanism to verify the
+ correctness of the format string and va_list arguments.
u64 SHOULD be printed with %llu/%llx, (unsigned long long):
@@ -32,4 +146,5 @@
Thank you for your cooperation and attention.
-By Randy Dunlap <rdunlap@xenotime.net>
+By Randy Dunlap <rdunlap@xenotime.net> and
+Andrew Murray <amurray@mpc-data.co.uk>
diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt
index 9996199..91ecff0 100644
--- a/Documentation/scheduler/sched-design-CFS.txt
+++ b/Documentation/scheduler/sched-design-CFS.txt
@@ -223,9 +223,10 @@
group created using the pseudo filesystem. See example steps below to create
task groups and modify their CPU share using the "cgroups" pseudo filesystem.
- # mkdir /dev/cpuctl
- # mount -t cgroup -ocpu none /dev/cpuctl
- # cd /dev/cpuctl
+ # mount -t tmpfs cgroup_root /sys/fs/cgroup
+ # mkdir /sys/fs/cgroup/cpu
+ # mount -t cgroup -ocpu none /sys/fs/cgroup/cpu
+ # cd /sys/fs/cgroup/cpu
# mkdir multimedia # create "multimedia" group of tasks
# mkdir browser # create "browser" group of tasks
diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt
index 605b0d4..71b54d5 100644
--- a/Documentation/scheduler/sched-rt-group.txt
+++ b/Documentation/scheduler/sched-rt-group.txt
@@ -129,9 +129,8 @@
Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real
CPU bandwidth to task groups.
-This uses the /cgroup virtual file system and
-"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
-control group.
+This uses the cgroup virtual file system and "<cgroup>/cpu.rt_runtime_us"
+to control the CPU time reserved for each control group.
For more information on working with control groups, you should read
Documentation/cgroups/cgroups.txt as well.
@@ -150,7 +149,7 @@
===============
There is work in progress to make the scheduling period for each group
-("/cgroup/<cgroup>/cpu.rt_period_us") configurable as well.
+("<cgroup>/cpu.rt_period_us") configurable as well.
The constraint on the period is that a subgroup must have a smaller or
equal period to its parent. But realistically its not very useful _yet_
diff --git a/Documentation/spinlocks.txt b/Documentation/spinlocks.txt
index 2e3c64b..9dbe885 100644
--- a/Documentation/spinlocks.txt
+++ b/Documentation/spinlocks.txt
@@ -13,18 +13,8 @@
The above is always safe. It will disable interrupts _locally_, but the
spinlock itself will guarantee the global lock, so it will guarantee that
there is only one thread-of-control within the region(s) protected by that
-lock. This works well even under UP. The above sequence under UP
-essentially is just the same as doing
-
- unsigned long flags;
-
- save_flags(flags); cli();
- ... critical section ...
- restore_flags(flags);
-
-so the code does _not_ need to worry about UP vs SMP issues: the spinlocks
-work correctly under both (and spinlocks are actually more efficient on
-architectures that allow doing the "save_flags + cli" in one operation).
+lock. This works well even under UP also, so the code does _not_ need to
+worry about UP vs SMP issues: the spinlocks work correctly under both.
NOTE! Implications of spin_locks for memory are further described in:
@@ -36,27 +26,7 @@
spinlock for most things - using more than one spinlock can make things a
lot more complex and even slower and is usually worth it only for
sequences that you _know_ need to be split up: avoid it at all cost if you
-aren't sure). HOWEVER, it _does_ mean that if you have some code that does
-
- cli();
- .. critical section ..
- sti();
-
-and another sequence that does
-
- spin_lock_irqsave(flags);
- .. critical section ..
- spin_unlock_irqrestore(flags);
-
-then they are NOT mutually exclusive, and the critical regions can happen
-at the same time on two different CPU's. That's fine per se, but the
-critical regions had better be critical for different things (ie they
-can't stomp on each other).
-
-The above is a problem mainly if you end up mixing code - for example the
-routines in ll_rw_block() tend to use cli/sti to protect the atomicity of
-their actions, and if a driver uses spinlocks instead then you should
-think about issues like the above.
+aren't sure).
This is really the only really hard part about spinlocks: once you start
using spinlocks they tend to expand to areas you might not have noticed
@@ -120,11 +90,10 @@
The single spin-lock primitives above are by no means the only ones. They
are the most safe ones, and the ones that work under all circumstances,
-but partly _because_ they are safe they are also fairly slow. They are
-much faster than a generic global cli/sti pair, but slower than they'd
-need to be, because they do have to disable interrupts (which is just a
-single instruction on a x86, but it's an expensive one - and on other
-architectures it can be worse).
+but partly _because_ they are safe they are also fairly slow. They are slower
+than they'd need to be, because they do have to disable interrupts
+(which is just a single instruction on a x86, but it's an expensive one -
+and on other architectures it can be worse).
If you have a case where you have to protect a data structure across
several CPU's and you want to use spinlocks you can potentially use
diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt
index d83703e..b3f606b 100644
--- a/Documentation/usb/error-codes.txt
+++ b/Documentation/usb/error-codes.txt
@@ -76,6 +76,13 @@
reported. That's because transfers often involve several packets, so that
one or more packets could finish before an error stops further endpoint I/O.
+For isochronous URBs, the urb status value is non-zero only if the URB is
+unlinked, the device is removed, the host controller is disabled, or the total
+transferred length is less than the requested length and the URB_SHORT_NOT_OK
+flag is set. Completion handlers for isochronous URBs should only see
+urb->status set to zero, -ENOENT, -ECONNRESET, -ESHUTDOWN, or -EREMOTEIO.
+Individual frame descriptor status fields may report more status codes.
+
0 Transfer completed successfully
@@ -132,7 +139,7 @@
device removal events immediately.
-EXDEV ISO transfer only partially completed
- look at individual frame status for details
+ (only set in iso_frame_desc[n].status, not urb->status)
-EINVAL ISO madness, if this happens: Log off and go home
diff --git a/Documentation/vm/hwpoison.txt b/Documentation/vm/hwpoison.txt
index 12f9ba2..5500684 100644
--- a/Documentation/vm/hwpoison.txt
+++ b/Documentation/vm/hwpoison.txt
@@ -129,12 +129,12 @@
of the memcg.
Example:
- mkdir /cgroup/hwpoison
+ mkdir /sys/fs/cgroup/mem/hwpoison
usemem -m 100 -s 1000 &
- echo `jobs -p` > /cgroup/hwpoison/tasks
+ echo `jobs -p` > /sys/fs/cgroup/mem/hwpoison/tasks
- memcg_ino=$(ls -id /cgroup/hwpoison | cut -f1 -d' ')
+ memcg_ino=$(ls -id /sys/fs/cgroup/mem/hwpoison | cut -f1 -d' ')
echo $memcg_ino > /debug/hwpoison/corrupt-filter-memcg
page-types -p `pidof init` --hwpoison # shall do nothing
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index 9b7221a..7c3a880 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -674,7 +674,7 @@
Field name: init_size
Type: read
-Offset/size: 0x25c/4
+Offset/size: 0x260/4
This field indicates the amount of linear contiguous memory starting
at the kernel runtime start address that the kernel needs before it
diff --git a/MAINTAINERS b/MAINTAINERS
index 29801f7..187282d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -594,6 +594,16 @@
F: arch/arm/lib/floppydma.S
F: arch/arm/include/asm/floppy.h
+ARM PMU PROFILING AND DEBUGGING
+M: Will Deacon <will.deacon@arm.com>
+S: Maintained
+F: arch/arm/kernel/perf_event*
+F: arch/arm/oprofile/common.c
+F: arch/arm/kernel/pmu.c
+F: arch/arm/include/asm/pmu.h
+F: arch/arm/kernel/hw_breakpoint.c
+F: arch/arm/include/asm/hw_breakpoint.h
+
ARM PORT
M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1345,16 +1355,18 @@
F: include/linux/cfag12864b.h
AVR32 ARCHITECTURE
-M: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+M: Haavard Skinnemoen <hskinnemoen@gmail.com>
+M: Hans-Christian Egtvedt <egtvedt@samfundet.no>
W: http://www.atmel.com/products/AVR32/
W: http://avr32linux.org/
W: http://avrfreaks.net/
-S: Supported
+S: Maintained
F: arch/avr32/
AVR32/AT32AP MACHINE SUPPORT
-M: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-S: Supported
+M: Haavard Skinnemoen <hskinnemoen@gmail.com>
+M: Hans-Christian Egtvedt <egtvedt@samfundet.no>
+S: Maintained
F: arch/avr32/mach-at32ap/
AX.25 NETWORK LAYER
@@ -1390,7 +1402,6 @@
BATMAN ADVANCED
M: Marek Lindner <lindner_marek@yahoo.de>
M: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
-M: Sven Eckelmann <sven@narfation.org>
L: b.a.t.m.a.n@lists.open-mesh.org
W: http://www.open-mesh.org/
S: Maintained
@@ -1423,7 +1434,6 @@
F: arch/blackfin/
BLACKFIN EMAC DRIVER
-M: Michael Hennerich <michael.hennerich@analog.com>
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
@@ -1639,7 +1649,7 @@
M: Oliver Hartkopp <socketcan@hartkopp.net>
M: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
M: Urs Thuermann <urs.thuermann@volkswagen.de>
-L: socketcan-core@lists.berlios.de
+L: socketcan-core@lists.berlios.de (subscribers-only)
L: netdev@vger.kernel.org
W: http://developer.berlios.de/projects/socketcan/
S: Maintained
@@ -1651,7 +1661,7 @@
CAN NETWORK DRIVERS
M: Wolfgang Grandegger <wg@grandegger.com>
-L: socketcan-core@lists.berlios.de
+L: socketcan-core@lists.berlios.de (subscribers-only)
L: netdev@vger.kernel.org
W: http://developer.berlios.de/projects/socketcan/
S: Maintained
@@ -1739,7 +1749,7 @@
F: drivers/net/enic/
CIRRUS LOGIC EP93XX ETHERNET DRIVER
-M: Lennert Buytenhek <kernel@wantstofly.org>
+M: Hartley Sweeten <hsweeten@visionengravers.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/arm/ep93xx_eth.c
@@ -1889,7 +1899,6 @@
W: http://www.codemonkey.org.uk/projects/cpufreq/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
S: Maintained
-F: arch/x86/kernel/cpu/cpufreq/
F: drivers/cpufreq/
F: include/linux/cpufreq.h
@@ -2198,7 +2207,7 @@
DOCUMENTATION
M: Randy Dunlap <rdunlap@xenotime.net>
L: linux-doc@vger.kernel.org
-T: quilt oss.oracle.com/~rdunlap/kernel-doc-patches/current/
+T: quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/
S: Maintained
F: Documentation/
@@ -2292,8 +2301,7 @@
EBTABLES
M: Bart De Schuymer <bart.de.schuymer@pandora.be>
-L: ebtables-user@lists.sourceforge.net
-L: ebtables-devel@lists.sourceforge.net
+L: netfilter-devel@vger.kernel.org
W: http://ebtables.sourceforge.net/
S: Maintained
F: include/linux/netfilter_bridge/ebt_*.h
@@ -3820,6 +3828,12 @@
F: drivers/leds/
F: include/linux/leds.h
+LEGACY EEPROM DRIVER
+M: Jean Delvare <khali@linux-fr.org>
+S: Maintained
+F: Documentation/misc-devices/eeprom
+F: drivers/misc/eeprom/eeprom.c
+
LEGO USB Tower driver
M: Juergen Stuber <starblue@users.sourceforge.net>
L: legousb-devel@lists.sourceforge.net
@@ -4145,7 +4159,7 @@
F: mm/
MEMORY RESOURCE CONTROLLER
-M: Balbir Singh <balbir@linux.vnet.ibm.com>
+M: Balbir Singh <bsingharora@gmail.com>
M: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
L: linux-mm@kvack.org
@@ -4252,8 +4266,7 @@
F: include/linux/mmc/
MULTIMEDIA CARD (MMC) ETC. OVER SPI
-M: David Brownell <dbrownell@users.sourceforge.net>
-S: Odd Fixes
+S: Orphan
F: drivers/mmc/host/mmc_spi.c
F: include/linux/spi/mmc_spi.h
@@ -4603,7 +4616,6 @@
OMAP USB SUPPORT
M: Felipe Balbi <balbi@ti.com>
-M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@@ -4892,7 +4904,7 @@
F: arch/*/include/asm/percpu.h
PER-TASK DELAY ACCOUNTING
-M: Balbir Singh <balbir@linux.vnet.ibm.com>
+M: Balbir Singh <bsingharora@gmail.com>
S: Maintained
F: include/linux/delayacct.h
F: kernel/delayacct.c
@@ -4947,6 +4959,7 @@
F: drivers/input/serio/i8042-unicore32io.h
F: drivers/i2c/busses/i2c-puv3.c
F: drivers/video/fb-puv3.c
+F: drivers/rtc/rtc-puv3.c
PMC SIERRA MaxRAID DRIVER
M: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
@@ -4979,7 +4992,7 @@
PNP SUPPORT
M: Adam Belay <abelay@mit.edu>
-M: Bjorn Helgaas <bjorn.helgaas@hp.com>
+M: Bjorn Helgaas <bhelgaas@google.com>
S: Maintained
F: drivers/pnp/
@@ -5178,6 +5191,7 @@
F: drivers/net/qlcnic/
QLOGIC QLGE 10Gb ETHERNET DRIVER
+M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
M: Ron Mercer <ron.mercer@qlogic.com>
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
@@ -5984,7 +5998,6 @@
F: drivers/staging/tty/specialix*
SPI SUBSYSTEM
-M: David Brownell <dbrownell@users.sourceforge.net>
M: Grant Likely <grant.likely@secretlab.ca>
L: spi-devel-general@lists.sourceforge.net
Q: http://patchwork.kernel.org/project/spi-devel-general/list/
@@ -6100,7 +6113,7 @@
F: Documentation/target/
TASKSTATS STATISTICS INTERFACE
-M: Balbir Singh <balbir@linux.vnet.ibm.com>
+M: Balbir Singh <bsingharora@gmail.com>
S: Maintained
F: Documentation/accounting/taskstats*
F: include/linux/taskstats*
@@ -6432,9 +6445,9 @@
F: drivers/usb/misc/rio500*
USB EHCI DRIVER
-M: David Brownell <dbrownell@users.sourceforge.net>
+M: Alan Stern <stern@rowland.harvard.edu>
L: linux-usb@vger.kernel.org
-S: Odd Fixes
+S: Maintained
F: Documentation/usb/ehci.txt
F: drivers/usb/host/ehci*
@@ -6448,9 +6461,10 @@
F: drivers/media/video/et61x251/
USB GADGET/PERIPHERAL SUBSYSTEM
-M: David Brownell <dbrownell@users.sourceforge.net>
+M: Felipe Balbi <balbi@ti.com>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
F: drivers/usb/gadget/
F: include/linux/usb/gadget*
@@ -6460,9 +6474,15 @@
L: linux-usb@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
-F: Documentation/usb/hiddev.txt
+F: Documentation/hid/hiddev.txt
F: drivers/hid/usbhid/
+USB/IP DRIVERS
+M: Matt Mooney <mfm@muteddisk.com>
+L: linux-usb@vger.kernel.org
+S: Maintained
+F: drivers/staging/usbip/
+
USB ISP116X DRIVER
M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org
@@ -6492,9 +6512,9 @@
F: sound/usb/midi.*
USB OHCI DRIVER
-M: David Brownell <dbrownell@users.sourceforge.net>
+M: Alan Stern <stern@rowland.harvard.edu>
L: linux-usb@vger.kernel.org
-S: Odd Fixes
+S: Maintained
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*
@@ -6720,6 +6740,15 @@
F: Documentation/filesystems/vfat.txt
F: fs/fat/
+VIDEOBUF2 FRAMEWORK
+M: Pawel Osciak <pawel@osciak.com>
+M: Marek Szyprowski <m.szyprowski@samsung.com>
+M: Kyungmin Park <kyungmin.park@samsung.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/media/video/videobuf2-*
+F: include/media/videobuf2-*
+
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
L: virtualization@lists.linux-foundation.org
@@ -6997,6 +7026,13 @@
S: Maintained
F: drivers/platform/x86
+X86 MCE INFRASTRUCTURE
+M: Tony Luck <tony.luck@intel.com>
+M: Borislav Petkov <bp@amd64.org>
+L: linux-edac@vger.kernel.org
+S: Maintained
+F: arch/x86/kernel/cpu/mcheck/*
+
XEN HYPERVISOR INTERFACE
M: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
diff --git a/Makefile b/Makefile
index 0f1db8d..6a5bdad 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 0
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION =
NAME = Sneaky Weasel
# *DOCUMENTATION*
@@ -378,7 +378,7 @@
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
-KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
@@ -1005,7 +1005,7 @@
define filechk_version.h
(echo \#define LINUX_VERSION_CODE $(shell \
- expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
+ expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
endef
@@ -1110,11 +1110,6 @@
PHONY += _modinst_
_modinst_:
- @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
- echo "Warning: you may need to install module-init-tools"; \
- echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
- sleep 1; \
- fi
@rm -rf $(MODLIB)/kernel
@rm -f $(MODLIB)/source
@mkdir -p $(MODLIB)/kernel
@@ -1531,12 +1526,8 @@
# Run depmod only if we have System.map and depmod is executable
quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
- cmd_depmod = \
- if [ -r System.map -a -x $(DEPMOD) ]; then \
- $(DEPMOD) -ae -F System.map \
- $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \
- $(KERNELRELEASE); \
- fi
+ cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
+ $(KERNELRELEASE)
# Create temporary dir for module support files
# clean it up only when building all modules
diff --git a/README b/README
index 8510017..0d5a7dd 100644
--- a/README
+++ b/README
@@ -1,6 +1,6 @@
- Linux kernel release 2.6.xx <http://kernel.org/>
+ Linux kernel release 3.x <http://kernel.org/>
-These are the release notes for Linux version 2.6. Read them carefully,
+These are the release notes for Linux version 3. Read them carefully,
as they tell you what this is all about, explain how to install the
kernel, and what to do if something goes wrong.
@@ -62,10 +62,10 @@
directory where you have permissions (eg. your home directory) and
unpack it:
- gzip -cd linux-2.6.XX.tar.gz | tar xvf -
+ gzip -cd linux-3.X.tar.gz | tar xvf -
or
- bzip2 -dc linux-2.6.XX.tar.bz2 | tar xvf -
+ bzip2 -dc linux-3.X.tar.bz2 | tar xvf -
Replace "XX" with the version number of the latest kernel.
@@ -75,15 +75,15 @@
files. They should match the library, and not get messed up by
whatever the kernel-du-jour happens to be.
- - You can also upgrade between 2.6.xx releases by patching. Patches are
+ - You can also upgrade between 3.x releases by patching. Patches are
distributed in the traditional gzip and the newer bzip2 format. To
install by patching, get all the newer patch files, enter the
- top level directory of the kernel source (linux-2.6.xx) and execute:
+ top level directory of the kernel source (linux-3.x) and execute:
- gzip -cd ../patch-2.6.xx.gz | patch -p1
+ gzip -cd ../patch-3.x.gz | patch -p1
or
- bzip2 -dc ../patch-2.6.xx.bz2 | patch -p1
+ bzip2 -dc ../patch-3.x.bz2 | patch -p1
(repeat xx for all versions bigger than the version of your current
source tree, _in_order_) and you should be ok. You may want to remove
@@ -91,9 +91,9 @@
failed patches (xxx# or xxx.rej). If there are, either you or me has
made a mistake.
- Unlike patches for the 2.6.x kernels, patches for the 2.6.x.y kernels
+ Unlike patches for the 3.x kernels, patches for the 3.x.y kernels
(also known as the -stable kernels) are not incremental but instead apply
- directly to the base 2.6.x kernel. Please read
+ directly to the base 3.x kernel. Please read
Documentation/applying-patches.txt for more information.
Alternatively, the script patch-kernel can be used to automate this
@@ -107,14 +107,14 @@
an alternative directory can be specified as the second argument.
- If you are upgrading between releases using the stable series patches
- (for example, patch-2.6.xx.y), note that these "dot-releases" are
- not incremental and must be applied to the 2.6.xx base tree. For
- example, if your base kernel is 2.6.12 and you want to apply the
- 2.6.12.3 patch, you do not and indeed must not first apply the
- 2.6.12.1 and 2.6.12.2 patches. Similarly, if you are running kernel
- version 2.6.12.2 and want to jump to 2.6.12.3, you must first
- reverse the 2.6.12.2 patch (that is, patch -R) _before_ applying
- the 2.6.12.3 patch.
+ (for example, patch-3.x.y), note that these "dot-releases" are
+ not incremental and must be applied to the 3.x base tree. For
+ example, if your base kernel is 3.0 and you want to apply the
+ 3.0.3 patch, you do not and indeed must not first apply the
+ 3.0.1 and 3.0.2 patches. Similarly, if you are running kernel
+ version 3.0.2 and want to jump to 3.0.3, you must first
+ reverse the 3.0.2 patch (that is, patch -R) _before_ applying
+ the 3.0.3 patch.
You can read more on this in Documentation/applying-patches.txt
- Make sure you have no stale .o files and dependencies lying around:
@@ -126,7 +126,7 @@
SOFTWARE REQUIREMENTS
- Compiling and running the 2.6.xx kernels requires up-to-date
+ Compiling and running the 3.x kernels requires up-to-date
versions of various software packages. Consult
Documentation/Changes for the minimum version numbers required
and how to get updates for these packages. Beware that using
@@ -142,11 +142,11 @@
Using the option "make O=output/dir" allow you to specify an alternate
place for the output files (including .config).
Example:
- kernel source code: /usr/src/linux-2.6.N
+ kernel source code: /usr/src/linux-3.N
build directory: /home/name/build/kernel
To configure and build the kernel use:
- cd /usr/src/linux-2.6.N
+ cd /usr/src/linux-3.N
make O=/home/name/build/kernel menuconfig
make O=/home/name/build/kernel
sudo make O=/home/name/build/kernel modules_install install
diff --git a/arch/alpha/include/asm/mmzone.h b/arch/alpha/include/asm/mmzone.h
index 8af56ce..445dc42 100644
--- a/arch/alpha/include/asm/mmzone.h
+++ b/arch/alpha/include/asm/mmzone.h
@@ -56,7 +56,6 @@
* Given a kernel address, find the home node of the underlying memory.
*/
#define kvaddr_to_nid(kaddr) pa_to_nid(__pa(kaddr))
-#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
/*
* Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 376f221..326f0a2 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -409,7 +409,7 @@
return -EFAULT;
len = namelen;
- if (namelen > 32)
+ if (len > 32)
len = 32;
down_read(&uts_sem);
@@ -594,7 +594,7 @@
down_read(&uts_sem);
res = sysinfo_table[offset];
len = strlen(res)+1;
- if (len > count)
+ if ((unsigned long)len > (unsigned long)count)
len = count;
if (copy_to_user(buf, res, len))
err = -EFAULT;
@@ -649,7 +649,7 @@
return 1;
case GSI_GET_HWRPB:
- if (nbytes < sizeof(*hwrpb))
+ if (nbytes > sizeof(*hwrpb))
return -EINVAL;
if (copy_to_user(buffer, hwrpb, nbytes) != 0)
return -EFAULT;
@@ -1008,6 +1008,7 @@
{
struct rusage r;
long ret, err;
+ unsigned int status = 0;
mm_segment_t old_fs;
if (!ur)
@@ -1016,13 +1017,15 @@
old_fs = get_fs();
set_fs (KERNEL_DS);
- ret = sys_wait4(pid, ustatus, options, (struct rusage __user *) &r);
+ ret = sys_wait4(pid, (unsigned int __user *) &status, options,
+ (struct rusage __user *) &r);
set_fs (old_fs);
if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
return -EFAULT;
err = 0;
+ err |= put_user(status, ustatus);
err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index f9da419..940b201 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -597,6 +597,8 @@
sub pc, lr, r0, lsr #32 @ properly flush pipeline
#endif
+#define PROC_ENTRY_SIZE (4*5)
+
/*
* Here follow the relocatable cache support functions for the
* various processors. This is a generic hook for locating an
@@ -624,7 +626,7 @@
ARM( addeq pc, r12, r3 ) @ call cache function
THUMB( addeq r12, r3 )
THUMB( moveq pc, r12 ) @ call cache function
- add r12, r12, #4*5
+ add r12, r12, #PROC_ENTRY_SIZE
b 1b
/*
@@ -691,9 +693,9 @@
.word 0x41069260 @ ARM926EJ-S (v5TEJ)
.word 0xff0ffff0
- b __arm926ejs_mmu_cache_on
- b __armv4_mmu_cache_off
- b __armv5tej_mmu_cache_flush
+ W(b) __arm926ejs_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv5tej_mmu_cache_flush
.word 0x00007000 @ ARM7 IDs
.word 0x0000f000
@@ -794,6 +796,16 @@
.size proc_types, . - proc_types
+ /*
+ * If you get a "non-constant expression in ".if" statement"
+ * error from the assembler on this line, check that you have
+ * not accidentally written a "b" instruction where you should
+ * have written W(b).
+ */
+ .if (. - proc_types) % PROC_ENTRY_SIZE != 0
+ .error "The size of one or more proc_types entries is wrong."
+ .endif
+
/*
* Turn off the Cache and MMU. ARMv3 does not support
* reading the control register, but ARMv4 does.
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index e568163..841df7d2 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -255,7 +255,7 @@
if (buf == 0) {
dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
__func__, ptr);
- return 0;
+ return ~0;
}
dev_dbg(dev,
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 889922a..67b5abb6 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -157,7 +157,7 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 316af54..9c0ad79 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -60,7 +60,7 @@
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 8b0c717..1d01ddd 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -142,7 +142,7 @@
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_SA1100=m
CONFIG_EXT2_FS=m
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
index 5b55041..721832f 100644
--- a/arch/arm/configs/xcep_defconfig
+++ b/arch/arm/configs/xcep_defconfig
@@ -73,7 +73,7 @@
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_SA1100=m
CONFIG_DMADEVICES=y
# CONFIG_DNOTIFY is not set
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index 960f655..59577ad 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -158,7 +158,7 @@
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_PXA=m
CONFIG_EXT2_FS=y
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index bc2d2d7..65c3f24 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -13,6 +13,9 @@
* Do not include any C declarations in this file - it is included by
* assembler source.
*/
+#ifndef __ASM_ASSEMBLER_H__
+#define __ASM_ASSEMBLER_H__
+
#ifndef __ASSEMBLY__
#error "Only include this from assembly code"
#endif
@@ -290,3 +293,4 @@
.macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort
.endm
+#endif /* __ASM_ASSEMBLER_H__ */
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
index ec0bbf7..2da8547 100644
--- a/arch/arm/include/asm/entry-macro-multi.S
+++ b/arch/arm/include/asm/entry-macro-multi.S
@@ -1,3 +1,5 @@
+#include <asm/assembler.h>
+
/*
* Interrupt handling. Preserves r7, r8, r9
*/
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index a701e42..0cdd7b4 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -76,6 +76,9 @@
unsigned long dt_root;
const char *model;
+ if (!dt_phys)
+ return NULL;
+
devtree = phys_to_virt(dt_phys);
/* check device tree validity */
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index e8d8856..90c62cd 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -435,6 +435,10 @@
usr_entry
kuser_cmpxchg_check
+#ifdef CONFIG_IRQSOFF_TRACER
+ bl trace_hardirqs_off
+#endif
+
get_thread_info tsk
#ifdef CONFIG_PREEMPT
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
@@ -453,7 +457,7 @@
#endif
mov why, #0
- b ret_to_user
+ b ret_to_user_from_irq
UNWIND(.fnend )
ENDPROC(__irq_usr)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 1e7b04a..b2a27b6 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -64,6 +64,7 @@
ENTRY(ret_to_user)
ret_slow_syscall:
disable_irq @ disable interrupts
+ENTRY(ret_to_user_from_irq)
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne work_pending
@@ -75,6 +76,7 @@
arch_ret_to_user r1, lr
restore_user_regs fast = 0, offset = 0
+ENDPROC(ret_to_user_from_irq)
ENDPROC(ret_to_user)
/*
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index fee7c36..016d6a0 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -193,8 +193,17 @@
offset -= 0x02000000;
offset += sym->st_value - loc;
- /* only Thumb addresses allowed (no interworking) */
- if (!(offset & 1) ||
+ /*
+ * For function symbols, only Thumb addresses are
+ * allowed (no interworking).
+ *
+ * For non-function symbols, the destination
+ * has no specific ARM/Thumb disposition, so
+ * the branch is resolved under the assumption
+ * that interworking is not required.
+ */
+ if ((ELF32_ST_TYPE(sym->st_info) == STT_FUNC &&
+ !(offset & 1)) ||
offset <= (s32)0xff000000 ||
offset >= (s32)0x01000000) {
pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index d53c0ab..2b5b142 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -583,7 +583,7 @@
static void armpmu_enable(struct pmu *pmu)
{
/* Enable all of the perf events on hardware. */
- int idx;
+ int idx, enabled = 0;
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
if (!armpmu)
@@ -596,9 +596,11 @@
continue;
armpmu->enable(&event->hw, idx);
+ enabled = 1;
}
- armpmu->start();
+ if (enabled)
+ armpmu->start();
}
static void armpmu_disable(struct pmu *pmu)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index ed11fb0..acbb447 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -73,6 +73,7 @@
#endif
extern void paging_init(struct machine_desc *desc);
+extern void sanity_check_meminfo(void);
extern void reboot_setup(char *str);
unsigned int processor_id;
@@ -900,6 +901,7 @@
parse_early_param();
+ sanity_check_meminfo();
arm_memblock_init(&meminfo, mdesc);
paging_init(mdesc);
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 344e52b..e7f92a4 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -318,9 +318,13 @@
smp_store_cpu_info(cpu);
/*
- * OK, now it's safe to let the boot CPU continue
+ * OK, now it's safe to let the boot CPU continue. Wait for
+ * the CPU migration code to notice that the CPU is online
+ * before we continue.
*/
set_cpu_online(cpu, true);
+ while (!cpu_active(cpu))
+ cpu_relax();
/*
* OK, it's off to the idle thread for us
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 60636f4..2c277d4 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -115,7 +115,7 @@
twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
- (twd_timer_rate / 1000000) % 100);
+ (twd_timer_rate / 10000) % 100);
}
}
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index d52eec2..6807cb1 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -139,7 +139,7 @@
fs = get_fs();
set_fs(KERNEL_DS);
- for (i = -4; i < 1; i++) {
+ for (i = -4; i < 1 + !!thumb; i++) {
unsigned int val, bad;
if (thumb)
@@ -563,7 +563,7 @@
if (!pmd_present(*pmd))
goto bad_access;
pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
- if (!pte_present(*pte) || !pte_dirty(*pte)) {
+ if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) {
pte_unmap_unlock(pte, ptl);
goto bad_access;
}
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 17fae4a..f1013d0 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -223,15 +223,15 @@
};
static struct clk_lookup periph_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
- CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+ CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
+ CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
- CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
- CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index cd850ed..dba0d8d 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -1220,7 +1220,7 @@
{
if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
- at91cap9_set_console_clock(portnr);
+ at91cap9_set_console_clock(at91_uarts[portnr]->id);
}
}
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index b228ce9..83a1a3f 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -199,9 +199,9 @@
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
- CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
- CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
- CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index a0ba475..7227755 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1135,7 +1135,7 @@
{
if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
- at91rm9200_set_console_clock(portnr);
+ at91rm9200_set_console_clock(at91_uarts[portnr]->id);
}
}
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 1fdeb90..39f81f4 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1173,7 +1173,7 @@
{
if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
- at91sam9260_set_console_clock(portnr);
+ at91sam9260_set_console_clock(at91_uarts[portnr]->id);
}
}
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 3eb4538..5004bf0 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -1013,7 +1013,7 @@
{
if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
- at91sam9261_set_console_clock(portnr);
+ at91sam9261_set_console_clock(at91_uarts[portnr]->id);
}
}
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index ffe081b..a050f41 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -1395,7 +1395,7 @@
{
if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
- at91sam9263_set_console_clock(portnr);
+ at91sam9263_set_console_clock(at91_uarts[portnr]->id);
}
}
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 2bb6ff9..11e2141 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -217,11 +217,11 @@
static struct clk_lookup periph_clocks_lookups[] = {
/* One additional fake clock for ohci */
CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
- CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk),
- CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
- CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+ CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
+ CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 0567486..600bffb 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1550,7 +1550,7 @@
{
if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
- at91sam9g45_set_console_clock(portnr);
+ at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
}
}
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 1a40f16..29dff18 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -191,8 +191,8 @@
};
static struct clk_lookup periph_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
- CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+ CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
+ CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index c296045..aacb19d 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -1168,7 +1168,7 @@
{
if (portnr < ATMEL_MAX_UART) {
atmel_default_console_device = at91_uarts[portnr];
- at91sam9rl_set_console_clock(portnr);
+ at91sam9rl_set_console_clock(at91_uarts[portnr]->id);
}
}
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 1904fdf..cdb65d4 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -215,7 +215,7 @@
csa = at91_sys_read(AT91_MATRIX_EBICSA);
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
- cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit();
+ cap9adk_nand_data.bus_width_16 = board_have_nand_16bit();
/* setup bus-width (8 or 16) */
if (cap9adk_nand_data.bus_width_16)
cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index d600dc1..5c24074 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -214,7 +214,7 @@
static void __init ek_add_device_nand(void)
{
- ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+ ek_nand_data.bus_width_16 = board_have_nand_16bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index f897f84..b60c22b 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -220,7 +220,7 @@
static void __init ek_add_device_nand(void)
{
- ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+ ek_nand_data.bus_width_16 = board_have_nand_16bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 605b26f..9bbdc92 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -221,7 +221,7 @@
static void __init ek_add_device_nand(void)
{
- ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+ ek_nand_data.bus_width_16 = board_have_nand_16bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 7624cf0..1325a50 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -198,7 +198,7 @@
static void __init ek_add_device_nand(void)
{
- ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+ ek_nand_data.bus_width_16 = board_have_nand_16bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 063c95d..33eaa13 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -178,7 +178,7 @@
static void __init ek_add_device_nand(void)
{
- ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+ ek_nand_data.bus_width_16 = board_have_nand_16bit();
/* setup bus-width (8 or 16) */
if (ek_nand_data.bus_width_16)
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h
index b855ee7..8f48660 100644
--- a/arch/arm/mach-at91/include/mach/system_rev.h
+++ b/arch/arm/mach-at91/include/mach/system_rev.h
@@ -13,13 +13,13 @@
* the 16-31 bit are reserved for at91 generic information
*
* bit 31:
- * 0 => nand 16 bit
- * 1 => nand 8 bit
+ * 0 => nand 8 bit
+ * 1 => nand 16 bit
*/
-#define BOARD_HAVE_NAND_8BIT (1 << 31)
-static int inline board_have_nand_8bit(void)
+#define BOARD_HAVE_NAND_16BIT (1 << 31)
+static inline int board_have_nand_16bit(void)
{
- return system_rev & BOARD_HAVE_NAND_8BIT;
+ return system_rev & BOARD_HAVE_NAND_16BIT;
}
#endif /* __ARCH_SYSTEM_REV_H__ */
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index c67f684..09a87e6 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -520,7 +520,7 @@
*/
if (have_imager()) {
label = "HD imager";
- mux |= 1;
+ mux |= 2;
/* externally mux MMC1/ENET/AIC33 to imager */
mux |= BIT(6) | BIT(5) | BIT(3);
@@ -540,7 +540,7 @@
resets &= ~BIT(1);
if (have_tvp7002()) {
- mux |= 2;
+ mux |= 1;
resets &= ~BIT(2);
label = "tvp7002 HD";
} else {
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 4e66881..fc4e98ea 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -494,7 +494,7 @@
.resource = da850_mcasp_resources,
};
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
.name = "davinci-pcm-audio",
.id = -1,
};
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 8f4f736..806a2f0 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -298,7 +298,7 @@
/*-------------------------------------------------------------------------*/
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
.name = "davinci-pcm-audio",
.id = -1,
};
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index a0b8388..cafbe13 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -252,8 +252,12 @@
static void
gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
- struct davinci_gpio_regs __iomem *g = irq2regs(irq);
+ struct davinci_gpio_regs __iomem *g;
u32 mask = 0xffff;
+ struct davinci_gpio_controller *d;
+
+ d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
+ g = (struct davinci_gpio_regs __iomem *)d->regs;
/* we only care about one bank */
if (irq & 1)
@@ -272,11 +276,14 @@
if (!status)
break;
__raw_writel(status, &g->intstat);
- if (irq & 1)
- status >>= 16;
/* now demux them to the right lowlevel handler */
- n = (int)irq_get_handler_data(irq);
+ n = d->irq_base;
+ if (irq & 1) {
+ n += 16;
+ status >>= 16;
+ }
+
while (status) {
res = ffs(status);
n += res;
@@ -422,8 +429,13 @@
/* set up all irqs in this bank */
irq_set_chained_handler(bank_irq, gpio_irq_handler);
- irq_set_chip_data(bank_irq, (__force void *)g);
- irq_set_handler_data(bank_irq, (void *)irq);
+
+ /*
+ * Each chip handles 32 gpios, and each irq bank consists of 16
+ * gpio irqs. Pass the irq bank's corresponding controller to
+ * the chained irq handler.
+ */
+ irq_set_handler_data(bank_irq, &chips[gpio / 32]);
for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
irq_set_chip(irq, &gpio_irqchip);
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index bfe68ec..952dc12 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -52,8 +52,14 @@
struct irq_chip_type *ct;
gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq);
+ if (!gc) {
+ pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n",
+ __func__, irq_start);
+ return;
+ }
+
ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
ct->chip.irq_mask = irq_gc_mask_clr_bit;
ct->chip.irq_unmask = irq_gc_mask_set_bit;
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 8207954..6659a0d 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -251,9 +251,9 @@
unsigned int mcr;
mcr = 0;
- if (!(mctrl & TIOCM_RTS))
+ if (mctrl & TIOCM_RTS)
mcr |= 2;
- if (!(mctrl & TIOCM_DTR))
+ if (mctrl & TIOCM_DTR)
mcr |= 1;
__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
@@ -402,11 +402,15 @@
}
};
+static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
+
static struct platform_device ep93xx_eth_device = {
.name = "ep93xx-eth",
.id = -1,
.dev = {
- .platform_data = &ep93xx_eth_data,
+ .platform_data = &ep93xx_eth_data,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .dma_mask = &ep93xx_eth_dma_mask,
},
.num_resources = ARRAY_SIZE(ep93xx_eth_resource),
.resource = ep93xx_eth_resource,
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index b92c1e5..1435fc3 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -91,6 +91,11 @@
help
Common setup code for the camera interfaces.
+config EXYNOS4_SETUP_USB_PHY
+ bool
+ help
+ Common setup code for USB PHY controller
+
# machine support
menu "EXYNOS4 Machines"
@@ -176,6 +181,7 @@
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
+ select EXYNOS4_SETUP_USB_PHY
select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index a9bb94f..60fe5ecf 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -56,4 +56,4 @@
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_USB_SUPPORT) += usb-phy.o
+obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 08813a6..bfd6214 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -23,6 +23,7 @@
#include <plat/sdhci.h>
#include <plat/devs.h>
#include <plat/fimc-core.h>
+#include <plat/iic-core.h>
#include <mach/regs-irq.h>
@@ -98,7 +99,7 @@
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_USB_HSPHY,
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
.pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
.length = SZ_4K,
.type = MT_DEVICE,
@@ -132,6 +133,11 @@
s3c_fimc_setname(1, "exynos4-fimc");
s3c_fimc_setname(2, "exynos4-fimc");
s3c_fimc_setname(3, "exynos4-fimc");
+
+ /* The I2C bus controllers are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+ s3c_i2c2_setname("s3c2440-i2c");
}
void __init exynos4_init_clocks(int xtal)
diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c
index 1eed5f9..983069a 100644
--- a/arch/arm/mach-exynos4/dev-audio.c
+++ b/arch/arm/mach-exynos4/dev-audio.c
@@ -330,7 +330,7 @@
static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
{
- s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4));
return 0;
}
diff --git a/arch/arm/mach-exynos4/headsmp.S b/arch/arm/mach-exynos4/headsmp.S
index 6c6cfc5..3cdeb36 100644
--- a/arch/arm/mach-exynos4/headsmp.S
+++ b/arch/arm/mach-exynos4/headsmp.S
@@ -13,7 +13,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
- __INIT
+ __CPUINIT
/*
* exynos4 specific entry point for secondary CPUs. This provides
diff --git a/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h
index 703118d..c337cf3 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h
@@ -11,7 +11,7 @@
#ifndef __PLAT_S5P_REGS_USB_PHY_H
#define __PLAT_S5P_REGS_USB_PHY_H
-#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S5P_VA_USB_HSPHY)
+#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
#define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00)
#define PHY1_HSIC_NORMAL_MASK (0xf << 9)
diff --git a/arch/arm/mach-exynos4/init.c b/arch/arm/mach-exynos4/init.c
index cf91f50..a8a83e3 100644
--- a/arch/arm/mach-exynos4/init.c
+++ b/arch/arm/mach-exynos4/init.c
@@ -35,6 +35,7 @@
tcfg->clocks = exynos4_serial_clocks;
tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
}
+ tcfg->flags |= NO_NEED_CHECK_CLKSRC;
}
s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index 1526764..edd8141 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -78,9 +78,7 @@
};
static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
.max_width = 8,
@@ -96,9 +94,7 @@
};
static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
.max_width = 8,
diff --git a/arch/arm/mach-exynos4/usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c
similarity index 100%
rename from arch/arm/mach-exynos4/usb-phy.c
rename to arch/arm/mach-exynos4/setup-usb-phy.c
diff --git a/arch/arm/mach-exynos4/time.c b/arch/arm/mach-exynos4/time.c
index 86b9fa0..ebb8f38 100644
--- a/arch/arm/mach-exynos4/time.c
+++ b/arch/arm/mach-exynos4/time.c
@@ -206,6 +206,7 @@
return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
}
+#ifdef CONFIG_PM
static void exynos4_pwm4_resume(struct clocksource *cs)
{
unsigned long pclk;
@@ -218,6 +219,7 @@
exynos4_pwm_init(4, ~0);
exynos4_pwm_start(4, 1);
}
+#endif
struct clocksource pwm_clocksource = {
.name = "pwm_timer4",
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index 5f1f986..121ad1d 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -103,6 +103,7 @@
clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
+ ce->cpumask = cpumask_of(smp_processor_id());
clockevents_register_device(ce);
}
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 30b971d..1be2eeb 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -26,6 +26,7 @@
#include <asm/hardware/debug-8250.S>
#else
+#include <mach/hardware.h>
/* For EBSA285 debugging */
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
@@ -36,8 +37,8 @@
.else
mov \rp, #0
.endif
- orr \rv, \rp, #0x42000000
- orr \rp, \rp, #dc21285_high
+ orr \rv, \rp, #dc21285_high
+ orr \rp, \rp, #0x42000000
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-h720x/Kconfig b/arch/arm/mach-h720x/Kconfig
index 9b6982ef..abf356c 100644
--- a/arch/arm/mach-h720x/Kconfig
+++ b/arch/arm/mach-h720x/Kconfig
@@ -6,12 +6,14 @@
bool "gms30c7201"
depends on ARCH_H720X
select CPU_H7201
+ select ZONE_DMA
help
Say Y here if you are using the Hynix GMS30C7201 Reference Board
config ARCH_H7202
bool "hms30c7202"
select CPU_H7202
+ select ZONE_DMA
depends on ARCH_H720X
help
Say Y here if you are using the Hynix HMS30C7202 Reference Board
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 74ed81a..0777257 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -419,14 +419,20 @@
/*
* clocksource
*/
+
+static cycle_t ixp4xx_clocksource_read(struct clocksource *c)
+{
+ return *IXP4XX_OSTS;
+}
+
unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
EXPORT_SYMBOL(ixp4xx_timer_freq);
static void __init ixp4xx_clocksource_init(void)
{
init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq);
- clocksource_mmio_init(&IXP4XX_OSTS, "OSTS", ixp4xx_timer_freq, 200, 32,
- clocksource_mmio_readl_up);
+ clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
+ ixp4xx_clocksource_read);
}
/*
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 72b4e76..ab9f999 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -79,7 +79,7 @@
static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
-static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
static APMU_CLK(lcd, LCD, 0x7f, 312000000);
/* device and clock bindings */
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 8f92ccd..1464607 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -110,7 +110,7 @@
static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
-static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(nand, NAND, 0x19b, 156000000);
static APMU_CLK(u2o, USB, 0x1b, 480000000);
/* device and clock bindings */
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 38b95e9..63621f1 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -23,6 +23,8 @@
#include <linux/io.h>
#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+
#include <mach/msm_iomap.h>
#include <mach/cpu.h>
@@ -55,10 +57,12 @@
#if defined(CONFIG_ARCH_QSD8X50)
#define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */
#define MSM_DGT_SHIFT (0)
-#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \
- defined(CONFIG_ARCH_MSM8960)
+#elif defined(CONFIG_ARCH_MSM7X30)
#define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */
#define MSM_DGT_SHIFT (0)
+#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960)
+#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */
+#define MSM_DGT_SHIFT (0)
#else
#define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
#define MSM_DGT_SHIFT (5)
@@ -100,7 +104,11 @@
{
struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource);
- return readl(clk->global_counter);
+ /*
+ * Shift timer count down by a constant due to unreliable lower bits
+ * on some targets.
+ */
+ return readl(clk->global_counter) >> clk->shift;
}
static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt)
diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c
index 65157a3..54add60 100644
--- a/arch/arm/mach-mxs/ocotp.c
+++ b/arch/arm/mach-mxs/ocotp.c
@@ -16,6 +16,8 @@
#include <linux/err.h>
#include <linux/mutex.h>
+#include <asm/processor.h> /* for cpu_relax() */
+
#include <mach/mxs.h>
#define OCOTP_WORD_OFFSET 0x20
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index af98117..5b114d1 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -4,14 +4,14 @@
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
+obj-$(CONFIG_PM) += pm.o sleep.o
# DSP
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index de88c92..f49ce85 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -215,7 +215,7 @@
.delay = 9,
};
-static struct platform_device ams_delta_kp_device __initdata = {
+static struct platform_device ams_delta_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
@@ -225,12 +225,12 @@
.resource = ams_delta_kp_resources,
};
-static struct platform_device ams_delta_lcd_device __initdata = {
+static struct platform_device ams_delta_lcd_device = {
.name = "lcd_ams_delta",
.id = -1,
};
-static struct platform_device ams_delta_led_device __initdata = {
+static struct platform_device ams_delta_led_device = {
.name = "ams-delta-led",
.id = -1
};
@@ -267,7 +267,7 @@
.power = ams_delta_camera_power,
};
-static struct platform_device ams_delta_camera_device __initdata = {
+static struct platform_device ams_delta_camera_device = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index d855934..f5a5220 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -284,14 +284,15 @@
dma_base = ioremap(res[0].start, resource_size(&res[0]));
if (!dma_base) {
pr_err("%s: Unable to ioremap\n", __func__);
- return -ENODEV;
+ ret = -ENODEV;
+ goto exit_device_put;
}
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
- goto exit_device_del;
+ goto exit_device_put;
}
p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
@@ -299,7 +300,7 @@
dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
__func__, pdev->name);
ret = -ENOMEM;
- goto exit_device_put;
+ goto exit_device_del;
}
d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
@@ -380,10 +381,10 @@
kfree(d);
exit_release_p:
kfree(p);
-exit_device_put:
- platform_device_put(pdev);
exit_device_del:
platform_device_del(pdev);
+exit_device_put:
+ platform_device_put(pdev);
return ret;
}
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 04c4b04..364137c 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -41,7 +41,7 @@
.bank_stride = 1,
};
-static struct __initdata platform_device omap15xx_mpu_gpio = {
+static struct platform_device omap15xx_mpu_gpio = {
.name = "omap_gpio",
.id = 0,
.dev = {
@@ -70,7 +70,7 @@
.bank_width = 16,
};
-static struct __initdata platform_device omap15xx_gpio = {
+static struct platform_device omap15xx_gpio = {
.name = "omap_gpio",
.id = 1,
.dev = {
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 5dd0d4c..293a246 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -44,7 +44,7 @@
.bank_stride = 1,
};
-static struct __initdata platform_device omap16xx_mpu_gpio = {
+static struct platform_device omap16xx_mpu_gpio = {
.name = "omap_gpio",
.id = 0,
.dev = {
@@ -73,7 +73,7 @@
.bank_width = 16,
};
-static struct __initdata platform_device omap16xx_gpio1 = {
+static struct platform_device omap16xx_gpio1 = {
.name = "omap_gpio",
.id = 1,
.dev = {
@@ -102,7 +102,7 @@
.bank_width = 16,
};
-static struct __initdata platform_device omap16xx_gpio2 = {
+static struct platform_device omap16xx_gpio2 = {
.name = "omap_gpio",
.id = 2,
.dev = {
@@ -131,7 +131,7 @@
.bank_width = 16,
};
-static struct __initdata platform_device omap16xx_gpio3 = {
+static struct platform_device omap16xx_gpio3 = {
.name = "omap_gpio",
.id = 3,
.dev = {
@@ -160,7 +160,7 @@
.bank_width = 16,
};
-static struct __initdata platform_device omap16xx_gpio4 = {
+static struct platform_device omap16xx_gpio4 = {
.name = "omap_gpio",
.id = 4,
.dev = {
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 1204c8b..c6ad248 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -46,7 +46,7 @@
.bank_stride = 2,
};
-static struct __initdata platform_device omap7xx_mpu_gpio = {
+static struct platform_device omap7xx_mpu_gpio = {
.name = "omap_gpio",
.id = 0,
.dev = {
@@ -75,7 +75,7 @@
.bank_width = 32,
};
-static struct __initdata platform_device omap7xx_gpio1 = {
+static struct platform_device omap7xx_gpio1 = {
.name = "omap_gpio",
.id = 1,
.dev = {
@@ -104,7 +104,7 @@
.bank_width = 32,
};
-static struct __initdata platform_device omap7xx_gpio2 = {
+static struct platform_device omap7xx_gpio2 = {
.name = "omap_gpio",
.id = 2,
.dev = {
@@ -133,7 +133,7 @@
.bank_width = 32,
};
-static struct __initdata platform_device omap7xx_gpio3 = {
+static struct platform_device omap7xx_gpio3 = {
.name = "omap_gpio",
.id = 3,
.dev = {
@@ -162,7 +162,7 @@
.bank_width = 32,
};
-static struct __initdata platform_device omap7xx_gpio4 = {
+static struct platform_device omap7xx_gpio4 = {
.name = "omap_gpio",
.id = 4,
.dev = {
@@ -191,7 +191,7 @@
.bank_width = 32,
};
-static struct __initdata platform_device omap7xx_gpio5 = {
+static struct platform_device omap7xx_gpio5 = {
.name = "omap_gpio",
.id = 5,
.dev = {
@@ -220,7 +220,7 @@
.bank_width = 32,
};
-static struct __initdata platform_device omap7xx_gpio6 = {
+static struct platform_device omap7xx_gpio6 = {
.name = "omap_gpio",
.id = 6,
.dev = {
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index fe31d93..334fb88 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -56,9 +56,13 @@
USE_PLATFORM_PM_SLEEP_OPS
},
};
+#define OMAP1_PWR_DOMAIN (&default_power_domain)
+#else
+#define OMAP1_PWR_DOMAIN NULL
+#endif /* CONFIG_PM_RUNTIME */
static struct pm_clk_notifier_block platform_bus_notifier = {
- .pwr_domain = &default_power_domain,
+ .pwr_domain = OMAP1_PWR_DOMAIN,
.con_ids = { "ick", "fck", NULL, },
};
@@ -72,4 +76,4 @@
return 0;
}
core_initcall(omap1_pm_runtime_init);
-#endif /* CONFIG_PM_RUNTIME */
+
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index d54969b..5de6eac 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -26,13 +26,13 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <mach/gpio.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ae2963a..5dac974 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -622,19 +622,19 @@
OMAP_MUX_MODE0),
};
-static struct omap_board_data serial1_data = {
+static struct omap_board_data serial1_data __initdata = {
.id = 0,
.pads = serial1_pads,
.pads_cnt = ARRAY_SIZE(serial1_pads),
};
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 73fa90b..63de2d3 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -258,7 +258,7 @@
{ ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" },
};
-static int omap_ethernet_init(void)
+static int __init omap_ethernet_init(void)
{
int status;
@@ -322,6 +322,7 @@
.gpio_wp = -EINVAL,
.nonremovable = true,
.ocr_mask = MMC_VDD_29_30,
+ .no_off_init = true,
},
{
.mmc = 1,
@@ -681,19 +682,19 @@
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
@@ -729,7 +730,7 @@
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
- omap4_mux_init(board_mux, package);
+ omap4_mux_init(board_mux, NULL, package);
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index f3beb8e..b124bdf 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -27,13 +27,13 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/smc91x.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#include <mach/gpio.h>
#include <plat/led.h>
#include <plat/usb.h>
#include <plat/board.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index c63115b..77456de 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -63,8 +63,6 @@
#define SB_T35_SMSC911X_CS 4
#define SB_T35_SMSC911X_GPIO 65
-#define NAND_BLOCK_SIZE SZ_128K
-
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
#include <plat/gpmc-smsc911x.h>
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 08f08e8..c3a9fd3 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -48,6 +48,7 @@
#include "mux.h"
#include "control.h"
+#include "common-board-devices.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
@@ -177,7 +178,7 @@
.reset_gpio_port[2] = -EINVAL,
};
-static int cm_t3517_init_usbh(void)
+static int __init cm_t3517_init_usbh(void)
{
int err;
@@ -203,8 +204,6 @@
#endif
#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-#define NAND_BLOCK_SIZE SZ_128K
-
static struct mtd_partition cm_t3517_nand_partitions[] = {
{
.name = "xloader",
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index cf520d7..34956ec 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -61,8 +61,6 @@
#include "timer-gp.h"
#include "common-board-devices.h"
-#define NAND_BLOCK_SIZE SZ_128K
-
#define OMAP_DM9000_GPIO_IRQ 25
#define OMAP3_DEVKIT_TS_GPIO 27
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index be71426..7f21d24 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -54,8 +54,6 @@
#include "pm.h"
#include "common-board-devices.h"
-#define NAND_BLOCK_SIZE SZ_128K
-
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
@@ -106,6 +104,9 @@
beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
| (gpio_get_value(173) << 2);
+ gpio_free_array(omap3_beagle_rev_gpios,
+ ARRAY_SIZE(omap3_beagle_rev_gpios));
+
switch (beagle_rev) {
case 7:
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
@@ -579,6 +580,9 @@
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions));
+ /* Ensure msecure is mux'd to be able to set the RTC. */
+ omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
+
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1d10736..23f71d4 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -30,6 +30,7 @@
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
@@ -41,7 +42,6 @@
#include <plat/board.h>
#include <plat/common.h>
-#include <mach/gpio.h>
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
@@ -57,8 +57,6 @@
#define PANDORA_WIFI_NRESET_GPIO 23
#define OMAP3_PANDORA_TS_GPIO 94
-#define NAND_BLOCK_SIZE SZ_128K
-
static struct mtd_partition omap3pandora_nand_partitions[] = {
{
.name = "xloader",
@@ -86,7 +84,8 @@
static struct omap_nand_platform_data pandora_nand_data = {
.cs = 0,
- .devsize = 1, /* '0' for 8-bit, '1' for 16-bit device */
+ .devsize = NAND_BUSWIDTH_16,
+ .xfer_type = NAND_OMAP_PREFETCH_DMA,
.parts = omap3pandora_nand_partitions,
.nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions),
};
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 82872d7..5f649fa 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -56,8 +56,6 @@
#include <asm/setup.h>
-#define NAND_BLOCK_SIZE SZ_128K
-
#define OMAP3_AC_GPIO 136
#define OMAP3_TS_GPIO 162
#define TB_BL_PWM_TIMER 9
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 90485fc..0cfe200 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -526,19 +526,19 @@
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
@@ -687,7 +687,7 @@
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
- omap4_mux_init(board_mux, package);
+ omap4_mux_init(board_mux, NULL, package);
if (wl12xx_set_platform_data(&omap_panda_wlan_data))
pr_err("error setting wl12xx data\n");
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 1555918..175e1ab 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -24,6 +24,7 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
@@ -45,7 +46,6 @@
#include <plat/common.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
-#include <mach/gpio.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
@@ -65,8 +65,6 @@
#define OVERO_GPIO_USBH_CPEN 168
#define OVERO_GPIO_USBH_NRESET 183
-#define NAND_BLOCK_SIZE SZ_128K
-
#define OVERO_SMSC911X_CS 5
#define OVERO_SMSC911X_GPIO 176
#define OVERO_SMSC911X2_CS 4
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index f6247e7..88bd6f7 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -488,6 +488,7 @@
.name = "V28_A",
.min_uV = 2800000,
.max_uV = 3000000,
+ .always_on = true, /* due VIO leak to AIC34 VDDs */
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
@@ -557,7 +558,7 @@
.subdev_board_info = &rx51_si4713_board_info,
};
-static struct platform_device rx51_si4713_dev __initdata_or_module = {
+static struct platform_device rx51_si4713_dev = {
.name = "radio-si4713",
.id = -1,
.dev = {
@@ -582,7 +583,7 @@
{
/* FIXME this gpio setup is just a placeholder for now */
gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm");
- gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en");
+ gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en");
return 0;
}
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index c7c6beb..d4683ba 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -26,7 +26,7 @@
{ LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" },
};
-static void zoom_lcd_panel_init(void)
+static void __init zoom_lcd_panel_init(void)
{
zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
LCD_PANEL_RESET_GPIO_PROD :
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index e94903b..94ccf46 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -85,18 +85,18 @@
struct spi_board_info *spi_bi = &ads7846_spi_board_info;
int err;
- err = gpio_request(gpio_pendown, "TS PenDown");
- if (err) {
- pr_err("Could not obtain gpio for TS PenDown: %d\n", err);
- return;
+ if (board_pdata && board_pdata->get_pendown_state) {
+ err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+ if (err) {
+ pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+ return;
+ }
+ gpio_export(gpio_pendown, 0);
+
+ if (gpio_debounce)
+ gpio_set_debounce(gpio_pendown, gpio_debounce);
}
- gpio_direction_input(gpio_pendown);
- gpio_export(gpio_pendown, 0);
-
- if (gpio_debounce)
- gpio_set_debounce(gpio_pendown, gpio_debounce);
-
ads7846_config.gpio_pendown = gpio_pendown;
spi_bi->bus_num = bus_num;
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index eb80b3b..6797190 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -1,6 +1,8 @@
#ifndef __OMAP_COMMON_BOARD_DEVICES__
#define __OMAP_COMMON_BOARD_DEVICES__
+#define NAND_BLOCK_SIZE SZ_128K
+
struct twl4030_platform_data;
struct mtd_partition;
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 7b85585..5b8ca68 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -97,7 +97,7 @@
WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
- return PTR_ERR(od);
+ return IS_ERR(od) ? PTR_ERR(od) : 0;
}
postcore_initcall(omap4_l3_init);
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index b2f30be..66868c5 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -145,6 +145,7 @@
int power_on, int vdd)
{
u32 reg;
+ unsigned long timeout;
if (power_on) {
reg = omap4_ctrl_pad_readl(control_pbias_offset);
@@ -157,9 +158,15 @@
OMAP4_MMC1_PWRDNZ_MASK |
OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
- /* 4 microsec delay for comparator to generate an error*/
- udelay(4);
- reg = omap4_ctrl_pad_readl(control_pbias_offset);
+
+ timeout = jiffies + msecs_to_jiffies(5);
+ do {
+ reg = omap4_ctrl_pad_readl(control_pbias_offset);
+ if (!(reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK))
+ break;
+ usleep_range(100, 200);
+ } while (!time_after(jiffies, timeout));
+
if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
pr_err("Pbias Voltage is not same as LDO\n");
/* Caution : On VMODE_ERROR Power Down MMC IO */
@@ -331,6 +338,9 @@
if (c->no_off)
mmc->slots[0].no_off = 1;
+ if (c->no_off_init)
+ mmc->slots[0].no_regulator_off_init = c->no_off_init;
+
if (c->vcc_aux_disable_is_sleep)
mmc->slots[0].vcc_aux_disable_is_sleep = 1;
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index f119348..f757e78 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -18,6 +18,7 @@
bool nonremovable; /* Nonremovable e.g. eMMC */
bool power_saving; /* Try to sleep or power off when possible */
bool no_off; /* power_saving and power is not to go off */
+ bool no_off_init; /* no power off when not in MMC sleep state */
bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index a4ab1e3..c7fb22a 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -83,6 +83,9 @@
void omap_mux_write_array(struct omap_mux_partition *partition,
struct omap_board_mux *board_mux)
{
+ if (!board_mux)
+ return;
+
while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
omap_mux_write(partition, board_mux->value,
board_mux->reg_offset);
@@ -906,7 +909,7 @@
u16 omap_mux_get_gpio(int gpio)
{
struct omap_mux_partition *partition;
- struct omap_mux *m;
+ struct omap_mux *m = NULL;
list_for_each_entry(partition, &mux_partitions, node) {
m = omap_mux_get_by_gpio(partition, gpio);
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 137f321..2132308 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -323,10 +323,12 @@
/**
* omap4_mux_init() - initialize mux system with board specific set
- * @board_mux: Board specific mux table
+ * @board_subset: Board specific mux table
+ * @board_wkup_subset: Board specific mux table for wakeup instance
* @flags: OMAP package type used for the board
*/
-int omap4_mux_init(struct omap_board_mux *board_mux, int flags);
+int omap4_mux_init(struct omap_board_mux *board_subset,
+ struct omap_board_mux *board_wkup_subset, int flags);
/**
* omap_mux_init - private mux init function, do not call
diff --git a/arch/arm/mach-omap2/mux44xx.c b/arch/arm/mach-omap2/mux44xx.c
index 9a66445..f5a74da 100644
--- a/arch/arm/mach-omap2/mux44xx.c
+++ b/arch/arm/mach-omap2/mux44xx.c
@@ -1309,7 +1309,8 @@
#define omap4_wkup_cbl_cbs_ball NULL
#endif
-int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags)
+int __init omap4_mux_init(struct omap_board_mux *board_subset,
+ struct omap_board_mux *board_wkup_subset, int flags)
{
struct omap_ball *package_balls_core;
struct omap_ball *package_balls_wkup = omap4_wkup_cbl_cbs_ball;
@@ -1347,7 +1348,7 @@
OMAP_MUX_GPIO_IN_MODE3,
OMAP4_CTRL_MODULE_PAD_WKUP_MUX_PBASE,
OMAP4_CTRL_MODULE_PAD_WKUP_MUX_SIZE,
- omap4_wkup_muxmodes, NULL, board_subset,
+ omap4_wkup_muxmodes, NULL, board_wkup_subset,
package_balls_wkup);
return ret;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e034294..293fa6c 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1628,7 +1628,7 @@
void *data)
{
struct omap_hwmod *temp_oh;
- int ret;
+ int ret = 0;
if (!fn)
return -EINVAL;
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index abc548a..e1c69ff 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -5109,7 +5109,7 @@
&omap44xx_iva_seq1_hwmod,
/* kbd class */
-/* &omap44xx_kbd_hwmod, */
+ &omap44xx_kbd_hwmod,
/* mailbox class */
&omap44xx_mailbox_hwmod,
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index f47813e..58775e3 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -56,8 +56,10 @@
/* Power down the phy */
__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
- if (!dev)
+ if (!dev) {
+ iounmap(ctrl_base);
return 0;
+ }
phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
if (IS_ERR(phyclk)) {
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index a5a83b3..e01da45 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -189,7 +189,7 @@
static int pm_dbg_init_done;
-static int __init pm_dbg_init(void);
+static int pm_dbg_init(void);
enum {
DEBUG_FILE_COUNTERS = 0,
@@ -595,7 +595,7 @@
DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n");
-static int __init pm_dbg_init(void)
+static int pm_dbg_init(void)
{
int i;
struct dentry *d;
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 87ae312..b27544b 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -347,9 +347,9 @@
if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
(GPDR(i) & GPIO_bit(i))) {
if (GPLR(i) & GPIO_bit(i))
- PGSR(i) |= GPIO_bit(i);
+ PGSR(gpio_to_bank(i)) |= GPIO_bit(i);
else
- PGSR(i) &= ~GPIO_bit(i);
+ PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i);
}
}
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index d130f77..2f37d43 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -573,10 +573,10 @@
.xres = 480,
.yres = 272,
.bpp = 16,
- .hsync_len = 4,
+ .hsync_len = 41,
.left_margin = 2,
.right_margin = 1,
- .vsync_len = 1,
+ .vsync_len = 10,
.upper_margin = 3,
.lower_margin = 1,
.sync = 0,
@@ -596,29 +596,31 @@
{
int ret;
- pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
-
- /* Earlier devices had the backlight regulator controlled
- * via PWM, later versions use another controller for that */
- if ((system_rev & 0xff) < 2) {
- mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
- pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
- platform_device_register(&raumfeld_pwm_backlight_device);
- } else
- platform_device_register(&raumfeld_lt3593_device);
-
ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
if (ret < 0)
pr_warning("Unable to request GPIO_TFT_VA_EN\n");
else
gpio_direction_output(GPIO_TFT_VA_EN, 1);
+ msleep(100);
+
ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
if (ret < 0)
pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
else
gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
+ /* Hardware revision 2 has the backlight regulator controlled
+ * by an LT3593, earlier and later devices use PWM for that. */
+ if ((system_rev & 0xff) == 2) {
+ platform_device_register(&raumfeld_lt3593_device);
+ } else {
+ mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
+ pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+ platform_device_register(&raumfeld_pwm_backlight_device);
+ }
+
+ pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
platform_device_register(&pxa3xx_device_gcu);
}
@@ -657,10 +659,10 @@
#define SPI_AK4104 \
{ \
- .modalias = "ak4104", \
- .max_speed_hz = 10000, \
- .bus_num = 0, \
- .chip_select = 0, \
+ .modalias = "ak4104-codec", \
+ .max_speed_hz = 10000, \
+ .bus_num = 0, \
+ .chip_select = 0, \
.controller_data = (void *) GPIO_SPDIF_CS, \
}
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 7fe7406..094279a 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/apm-emulation.h>
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 0d468e9..8169535 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -10,7 +10,6 @@
obj- :=
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_CPU_S3C2410) += irq.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
deleted file mode 100644
index 2854129..0000000
--- a/arch/arm/mach-s3c2410/irq.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
-};
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index dd3120d..fc2dc0b 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -552,7 +552,7 @@
struct platform_device *optional[8];
};
-static void mini2440_parse_features(
+static void __init mini2440_parse_features(
struct mini2440_features_t * features,
const char * features_str )
{
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index 82db072..5e6b420 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -88,6 +88,7 @@
.cfg_gpio = s3c64xx_spi_cfg_gpio,
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
+ .tx_st_done = 21,
};
static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -132,6 +133,7 @@
.cfg_gpio = s3c64xx_spi_cfg_gpio,
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
+ .tx_st_done = 21,
};
struct platform_device s3c64xx_device_spi1 = {
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index b197171..204bfaf 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -113,7 +113,7 @@
return chan;
}
-int s3c2410_dma_config(unsigned int channel, int xferunit)
+int s3c2410_dma_config(enum dma_ch channel, int xferunit)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -297,7 +297,7 @@
return 0;
}
-int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -331,7 +331,7 @@
*
*/
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
dma_addr_t data, int size)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -415,7 +415,7 @@
EXPORT_SYMBOL(s3c2410_dma_enqueue);
-int s3c2410_dma_devconfig(unsigned int channel,
+int s3c2410_dma_devconfig(enum dma_ch channel,
enum s3c2410_dmasrc source,
unsigned long devaddr)
{
@@ -463,7 +463,7 @@
EXPORT_SYMBOL(s3c2410_dma_devconfig);
-int s3c2410_dma_getposition(unsigned int channel,
+int s3c2410_dma_getposition(enum dma_ch channel,
dma_addr_t *src, dma_addr_t *dst)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -487,7 +487,7 @@
* get control of an dma channel
*/
-int s3c2410_dma_request(unsigned int channel,
+int s3c2410_dma_request(enum dma_ch channel,
struct s3c2410_dma_client *client,
void *dev)
{
@@ -533,7 +533,7 @@
* allowed to go through.
*/
-int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
unsigned long flags;
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
index e78ee18..ac825e8 100644
--- a/arch/arm/mach-s5p64x0/dev-spi.c
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -112,12 +112,14 @@
.cfg_gpio = s5p6440_spi_cfg_gpio,
.fifo_lvl_mask = 0x1ff,
.rx_lvl_offset = 15,
+ .tx_st_done = 25,
};
static struct s3c64xx_spi_info s5p6450_spi0_pdata = {
.cfg_gpio = s5p6450_spi_cfg_gpio,
.fifo_lvl_mask = 0x1ff,
.rx_lvl_offset = 15,
+ .tx_st_done = 25,
};
static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -160,12 +162,14 @@
.cfg_gpio = s5p6440_spi_cfg_gpio,
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
+ .tx_st_done = 25,
};
static struct s3c64xx_spi_info s5p6450_spi1_pdata = {
.cfg_gpio = s5p6450_spi_cfg_gpio,
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
+ .tx_st_done = 25,
};
struct platform_device s5p64x0_device_spi1 = {
diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c
index 57b1979..e5d6c4d 100644
--- a/arch/arm/mach-s5pc100/dev-spi.c
+++ b/arch/arm/mach-s5pc100/dev-spi.c
@@ -15,6 +15,7 @@
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/spi-clocks.h>
+#include <mach/irqs.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
@@ -90,6 +91,7 @@
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.high_speed = 1,
+ .tx_st_done = 21,
};
static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -134,6 +136,7 @@
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.high_speed = 1,
+ .tx_st_done = 21,
};
struct platform_device s5pc100_device_spi1 = {
@@ -176,6 +179,7 @@
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.high_speed = 1,
+ .tx_st_done = 21,
};
struct platform_device s5pc100_device_spi2 = {
diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c
index 22046e2..153af8b 100644
--- a/arch/arm/mach-s5pv210/cpufreq.c
+++ b/arch/arm/mach-s5pv210/cpufreq.c
@@ -101,12 +101,14 @@
unsigned long tmp, tmp1;
void __iomem *reg = NULL;
- if (ch == DMC0)
+ if (ch == DMC0) {
reg = (S5P_VA_DMC0 + 0x30);
- else if (ch == DMC1)
+ } else if (ch == DMC1) {
reg = (S5P_VA_DMC1 + 0x30);
- else
+ } else {
printk(KERN_ERR "Cannot find DMC port\n");
+ return;
+ }
/* Find current DRAM frequency */
tmp = s5pv210_dram_conf[ch].freq;
diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c
index e3249a4..eaf9a7b 100644
--- a/arch/arm/mach-s5pv210/dev-spi.c
+++ b/arch/arm/mach-s5pv210/dev-spi.c
@@ -85,6 +85,7 @@
.fifo_lvl_mask = 0x1ff,
.rx_lvl_offset = 15,
.high_speed = 1,
+ .tx_st_done = 25,
};
static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -129,6 +130,7 @@
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
.high_speed = 1,
+ .tx_st_done = 25,
};
struct platform_device s5pv210_device_spi1 = {
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index c95258c..ce5c251 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -381,11 +381,9 @@
gpio_set_value(GPIO_PORT114, state);
}
-static struct sh_mobile_sdhi_info sh_sdhi1_platdata = {
- .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
- .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
+static struct sh_mobile_sdhi_info sh_sdhi1_info = {
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
- .tmio_caps = MMC_CAP_NONREMOVABLE,
+ .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
.tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.set_pwr = ag5evm_sdhi1_set_pwr,
};
@@ -415,7 +413,7 @@
.name = "sh_mobile_sdhi",
.id = 1,
.dev = {
- .platform_data = &sh_sdhi1_platdata,
+ .platform_data = &sh_sdhi1_info,
},
.num_resources = ARRAY_SIZE(sdhi1_resources),
.resource = sdhi1_resources,
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index f6b687f..803bc6e 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -913,7 +913,7 @@
I2C_BOARD_INFO("imx074", 0x1a),
};
-struct soc_camera_link imx074_link = {
+static struct soc_camera_link imx074_link = {
.bus_id = 0,
.board_info = &imx074_info,
.i2c_adapter_id = 0,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 776f205..3802f2a 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -126,7 +126,7 @@
* ------+--------------------+--------------------+-------
* IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low
* IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High
- * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Tuch Panel | Low
+ * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low
* IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low
* IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low
* IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High
@@ -165,10 +165,10 @@
* USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
* But don't select both drivers in same time.
* These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARD / IORESOURCE_IRQ_SHAREABLE.
+ * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
*
* Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports SHARD IRQ,
+ * This mean its register will be broken if it supports shared IRQ,
*/
/*
@@ -562,7 +562,121 @@
clk_put(hdmi_ick);
}
-/* USB1 (Host) */
+/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
+ *
+ * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
+ * but on this particular board IRQ7 is already used by
+ * the touch screen. This leaves us with software polling.
+ */
+#define USBHS0_POLL_INTERVAL (HZ * 5)
+
+struct usbhs_private {
+ unsigned int usbphyaddr;
+ unsigned int usbcrcaddr;
+ struct renesas_usbhs_platform_info info;
+ struct delayed_work work;
+ struct platform_device *pdev;
+};
+
+#define usbhs_get_priv(pdev) \
+ container_of(renesas_usbhs_get_info(pdev), \
+ struct usbhs_private, info)
+
+#define usbhs_is_connected(priv) \
+ (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
+
+static int usbhs_get_vbus(struct platform_device *pdev)
+{
+ return usbhs_is_connected(usbhs_get_priv(pdev));
+}
+
+static void usbhs_phy_reset(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ /* init phy */
+ __raw_writew(0x8a0a, priv->usbcrcaddr);
+}
+
+static int usbhs0_get_id(struct platform_device *pdev)
+{
+ return USBHS_GADGET;
+}
+
+static void usbhs0_work_function(struct work_struct *work)
+{
+ struct usbhs_private *priv = container_of(work, struct usbhs_private,
+ work.work);
+
+ renesas_usbhs_call_notify_hotplug(priv->pdev);
+ schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+}
+
+static int usbhs0_hardware_init(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ priv->pdev = pdev;
+ INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
+ schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+ return 0;
+}
+
+static void usbhs0_hardware_exit(struct platform_device *pdev)
+{
+ struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+ cancel_delayed_work_sync(&priv->work);
+}
+
+static struct usbhs_private usbhs0_private = {
+ .usbcrcaddr = 0xe605810c, /* USBCR2 */
+ .info = {
+ .platform_callback = {
+ .hardware_init = usbhs0_hardware_init,
+ .hardware_exit = usbhs0_hardware_exit,
+ .phy_reset = usbhs_phy_reset,
+ .get_id = usbhs0_get_id,
+ .get_vbus = usbhs_get_vbus,
+ },
+ .driver_param = {
+ .buswait_bwait = 4,
+ },
+ },
+};
+
+static struct resource usbhs0_resources[] = {
+ [0] = {
+ .name = "USBHS0",
+ .start = 0xe6890000,
+ .end = 0xe68900e6 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x1ca0) /* USB0_USB0I0 */,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbhs0_device = {
+ .name = "renesas_usbhs",
+ .id = 0,
+ .dev = {
+ .platform_data = &usbhs0_private.info,
+ },
+ .num_resources = ARRAY_SIZE(usbhs0_resources),
+ .resource = usbhs0_resources,
+};
+
+/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
+ *
+ * Use J30 to select between Host and Function. This setting
+ * can however not be detected by software. Hotplug of USBHS1
+ * is provided via IRQ8.
+ */
+#define IRQ8 evt2irq(0x0300)
+
+/* USBHS1 USB Host support via r8a66597_hcd */
static void usb1_host_port_power(int port, int power)
{
if (!power) /* only power-on is supported for now */
@@ -579,9 +693,9 @@
static struct resource usb1_host_resources[] = {
[0] = {
- .name = "USBHS",
- .start = 0xE68B0000,
- .end = 0xE68B00E6 - 1,
+ .name = "USBHS1",
+ .start = 0xe68b0000,
+ .end = 0xe68b00e6 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -602,37 +716,14 @@
.resource = usb1_host_resources,
};
-/* USB1 (Function) */
+/* USBHS1 USB Function support via renesas_usbhs */
+
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
#define USB_PHY_OFF (1 << 0)
#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF)
-struct usbhs_private {
- unsigned int irq;
- unsigned int usbphyaddr;
- unsigned int usbcrcaddr;
- struct renesas_usbhs_platform_info info;
-};
-
-#define usbhs_get_priv(pdev) \
- container_of(renesas_usbhs_get_info(pdev), \
- struct usbhs_private, info)
-
-#define usbhs_is_connected(priv) \
- (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
-
-static int usbhs1_get_id(struct platform_device *pdev)
-{
- return USBHS_GADGET;
-}
-
-static int usbhs1_get_vbus(struct platform_device *pdev)
-{
- return usbhs_is_connected(usbhs_get_priv(pdev));
-}
-
static irqreturn_t usbhs1_interrupt(int irq, void *data)
{
struct platform_device *pdev = data;
@@ -654,12 +745,10 @@
struct usbhs_private *priv = usbhs_get_priv(pdev);
int ret;
- irq_set_irq_type(priv->irq, IRQ_TYPE_LEVEL_HIGH);
-
/* clear interrupt status */
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
- ret = request_irq(priv->irq, usbhs1_interrupt, 0,
+ ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
dev_name(&pdev->dev), pdev);
if (ret) {
dev_err(&pdev->dev, "request_irq err\n");
@@ -679,15 +768,12 @@
/* clear interrupt status */
__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
- free_irq(priv->irq, pdev);
+ free_irq(IRQ8, pdev);
}
-static void usbhs1_phy_reset(struct platform_device *pdev)
+static int usbhs1_get_id(struct platform_device *pdev)
{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- /* init phy */
- __raw_writew(0x8a0a, priv->usbcrcaddr);
+ return USBHS_GADGET;
}
static u32 usbhs1_pipe_cfg[] = {
@@ -710,16 +796,15 @@
};
static struct usbhs_private usbhs1_private = {
- .irq = evt2irq(0x0300), /* IRQ8 */
- .usbphyaddr = 0xE60581E2, /* USBPHY1INTAP */
- .usbcrcaddr = 0xE6058130, /* USBCR4 */
+ .usbphyaddr = 0xe60581e2, /* USBPHY1INTAP */
+ .usbcrcaddr = 0xe6058130, /* USBCR4 */
.info = {
.platform_callback = {
.hardware_init = usbhs1_hardware_init,
.hardware_exit = usbhs1_hardware_exit,
- .phy_reset = usbhs1_phy_reset,
.get_id = usbhs1_get_id,
- .get_vbus = usbhs1_get_vbus,
+ .phy_reset = usbhs_phy_reset,
+ .get_vbus = usbhs_get_vbus,
},
.driver_param = {
.buswait_bwait = 4,
@@ -731,9 +816,9 @@
static struct resource usbhs1_resources[] = {
[0] = {
- .name = "USBHS",
- .start = 0xE68B0000,
- .end = 0xE68B00E6 - 1,
+ .name = "USBHS1",
+ .start = 0xe68b0000,
+ .end = 0xe68b00e6 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -752,7 +837,6 @@
.resource = usbhs1_resources,
};
-
/* LED */
static struct gpio_led mackerel_leds[] = {
{
@@ -1205,6 +1289,7 @@
&lcdc_device,
&usb1_host_device,
&usbhs1_device,
+ &usbhs0_device,
&leds_device,
&fsi_device,
&fsi_ak4643_device,
@@ -1301,6 +1386,7 @@
#define GPIO_PORT9CR 0xE6051009
#define GPIO_PORT10CR 0xE605100A
+#define GPIO_PORT167CR 0xE60520A7
#define GPIO_PORT168CR 0xE60520A8
#define SRCR4 0xe61580bc
#define USCCR1 0xE6058144
@@ -1354,17 +1440,17 @@
gpio_request(GPIO_PORT151, NULL); /* LCDDON */
gpio_direction_output(GPIO_PORT151, 1);
- /* USB enable */
- gpio_request(GPIO_FN_VBUS0_1, NULL);
- gpio_request(GPIO_FN_IDIN_1_18, NULL);
- gpio_request(GPIO_FN_PWEN_1_115, NULL);
- gpio_request(GPIO_FN_OVCN_1_114, NULL);
- gpio_request(GPIO_FN_EXTLP_1, NULL);
- gpio_request(GPIO_FN_OVCN2_1, NULL);
- gpio_pull_down(GPIO_PORT168CR);
+ /* USBHS0 */
+ gpio_request(GPIO_FN_VBUS0_0, NULL);
+ gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
- /* setup USB phy */
- __raw_writew(0x8a0a, 0xE6058130); /* USBCR4 */
+ /* USBHS1 */
+ gpio_request(GPIO_FN_VBUS0_1, NULL);
+ gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
+ gpio_request(GPIO_FN_IDIN_1_113, NULL);
+
+ /* USB phy tweak to make the r8a66597_hcd host driver work */
+ __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */
/* enable FSI2 port A (ak4643) */
gpio_request(GPIO_FN_FSIAIBT, NULL);
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 5d0e1503..a911a60 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -250,6 +250,11 @@
return IRQ_HANDLED;
}
+static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
+{
+ return 0; /* always allow wakeup */
+}
+
void __init sh73a0_init_irq(void)
{
void __iomem *gic_dist_base = __io(0xf0001000);
@@ -257,6 +262,7 @@
void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
gic_init(0, 29, gic_dist_base, gic_cpu_base);
+ gic_arch_extn.irq_set_wake = sh73a0_set_wake;
register_intc_controller(&intcs_desc);
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
index 2c10190..e546017 100644
--- a/arch/arm/mach-shmobile/setup-sh7367.c
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -38,7 +38,7 @@
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc00), evt2irq(0xc00),
evt2irq(0xc00), evt2irq(0xc00) },
};
@@ -57,7 +57,7 @@
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc20), evt2irq(0xc20),
evt2irq(0xc20), evt2irq(0xc20) },
};
@@ -76,7 +76,7 @@
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc40), evt2irq(0xc40),
evt2irq(0xc40), evt2irq(0xc40) },
};
@@ -95,7 +95,7 @@
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xc60), evt2irq(0xc60),
evt2irq(0xc60), evt2irq(0xc60) },
};
@@ -114,7 +114,7 @@
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xd20), evt2irq(0xd20),
evt2irq(0xd20), evt2irq(0xd20) },
};
@@ -133,7 +133,7 @@
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFA,
.irqs = { evt2irq(0xd40), evt2irq(0xd40),
evt2irq(0xd40), evt2irq(0xd40) },
};
@@ -152,7 +152,7 @@
.flags = UPF_BOOT_AUTOCONF,
.scscr = SCSCR_RE | SCSCR_TE,
.scbrr_algo_id = SCBRR_ALGO_4,
- .type = PORT_SCIF,
+ .type = PORT_SCIFB,
.irqs = { evt2irq(0xd60), evt2irq(0xd60),
evt2irq(0xd60), evt2irq(0xd60) },
};
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
index c34f3ea..4f50ca8 100644
--- a/arch/arm/mach-u300/clock.h
+++ b/arch/arm/mach-u300/clock.h
@@ -31,7 +31,7 @@
bool reset;
__u16 clk_val;
__s8 usecount;
- __u32 res_reg;
+ void __iomem * res_reg;
__u16 res_mask;
bool hw_ctrld;
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 8b85df4..035fdc9 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -18,6 +18,12 @@
* the defines are used for setting up the I/O memory mapping.
*/
+#ifdef __ASSEMBLER__
+#define IOMEM(a) (a)
+#else
+#define IOMEM(a) (void __iomem *) a
+#endif
+
/* NAND Flash CS0 */
#define U300_NAND_CS0_PHYS_BASE 0x80000000
@@ -48,13 +54,6 @@
#endif
/*
- * All the following peripherals are specified at their PHYSICAL address,
- * so if you need to access them (in the kernel), you MUST use the macros
- * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
- * etc.
- */
-
-/*
* AHB peripherals
*/
@@ -63,11 +62,11 @@
/* Vectored Interrupt Controller 0, servicing 32 interrupts */
#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
-#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000)
+#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
/* Vectored Interrupt Controller 1, servicing 32 interrupts */
#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
-#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000)
+#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
/* Memory Stick Pro (MSPRO) controller */
#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
@@ -115,7 +114,7 @@
/* SYSCON */
#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
-#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000)
+#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
/* Watchdog */
#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
@@ -125,7 +124,7 @@
/* APP side special timer */
#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
-#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000)
+#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
/* Keypad */
#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
@@ -181,5 +180,4 @@
* Virtual accessor macros for static devices
*/
-
#endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 891cf44..18d7fa0 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -411,8 +411,7 @@
/* Use general purpose timer 2 as clock source */
if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC,
"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
- printk(KERN_ERR "timer: failed to initialize clock "
- "source %s\n", clocksource_u300_1mhz.name);
+ pr_err("timer: failed to initialize U300 clock source\n");
clockevents_calc_mult_shift(&clockevent_u300_1mhz,
rate, APPTIMER_MIN_RANGE);
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index fd4cf1c..70cdbd6 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -110,10 +110,18 @@
GPIO168_KP_O0,
/* UART */
- GPIO0_U0_CTSn | PIN_INPUT_PULLUP,
- GPIO1_U0_RTSn | PIN_OUTPUT_HIGH,
- GPIO2_U0_RXD | PIN_INPUT_PULLUP,
- GPIO3_U0_TXD | PIN_OUTPUT_HIGH,
+ /* uart-0 pins gpio configuration should be
+ * kept intact to prevent glitch in tx line
+ * when tty dev is opened. Later these pins
+ * are configured to uart mop500_pins_uart0
+ *
+ * It will be replaced with uart configuration
+ * once the issue is solved.
+ */
+ GPIO0_GPIO | PIN_INPUT_PULLUP,
+ GPIO1_GPIO | PIN_OUTPUT_HIGH,
+ GPIO2_GPIO | PIN_INPUT_PULLUP,
+ GPIO3_GPIO | PIN_OUTPUT_HIGH,
GPIO29_U2_RXD | PIN_INPUT_PULLUP,
GPIO30_U2_TXD | PIN_OUTPUT_HIGH,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bb26f40..2a08c07 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -27,18 +27,21 @@
#include <linux/leds-lp5521.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/delay.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <plat/i2c.h>
#include <plat/ste_dma40.h>
+#include <plat/pincfg.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/irqs.h>
+#include "pins-db8500.h"
#include "ste-dma40-db8500.h"
#include "devices-db8500.h"
#include "board-mop500.h"
@@ -393,12 +396,63 @@
};
#endif
+
+static pin_cfg_t mop500_pins_uart0[] = {
+ GPIO0_U0_CTSn | PIN_INPUT_PULLUP,
+ GPIO1_U0_RTSn | PIN_OUTPUT_HIGH,
+ GPIO2_U0_RXD | PIN_INPUT_PULLUP,
+ GPIO3_U0_TXD | PIN_OUTPUT_HIGH,
+};
+
+#define PRCC_K_SOFTRST_SET 0x18
+#define PRCC_K_SOFTRST_CLEAR 0x1C
+static void ux500_uart0_reset(void)
+{
+ void __iomem *prcc_rst_set, *prcc_rst_clr;
+
+ prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+ PRCC_K_SOFTRST_SET);
+ prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+ PRCC_K_SOFTRST_CLEAR);
+
+ /* Activate soft reset PRCC_K_SOFTRST_CLEAR */
+ writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
+ udelay(1);
+
+ /* Release soft reset PRCC_K_SOFTRST_SET */
+ writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
+ udelay(1);
+}
+
+static void ux500_uart0_init(void)
+{
+ int ret;
+
+ ret = nmk_config_pins(mop500_pins_uart0,
+ ARRAY_SIZE(mop500_pins_uart0));
+ if (ret < 0)
+ pr_err("pl011: uart pins_enable failed\n");
+}
+
+static void ux500_uart0_exit(void)
+{
+ int ret;
+
+ ret = nmk_config_pins_sleep(mop500_pins_uart0,
+ ARRAY_SIZE(mop500_pins_uart0));
+ if (ret < 0)
+ pr_err("pl011: uart pins_disable failed\n");
+}
+
static struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
.dma_tx_param = &uart0_dma_cfg_tx,
#endif
+ .init = ux500_uart0_init,
+ .exit = ux500_uart0_exit,
+ .reset = ux500_uart0_reset,
};
static struct amba_pl011_data uart1_plat = {
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index c3c4176..4598b06 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -159,6 +159,9 @@
/* No custom data yet */
};
+ if (cpu_is_u8500v2())
+ pdata.supports_sleepmode = true;
+
dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
}
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 285edcd..9e6b93b 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -46,12 +46,6 @@
},
};
-static void __init v2m_init_early(void)
-{
- ct_desc->init_early();
- versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
-}
-
static void __init v2m_timer_init(void)
{
u32 scctrl;
@@ -365,6 +359,13 @@
},
};
+static void __init v2m_init_early(void)
+{
+ ct_desc->init_early();
+ clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
+ versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
+}
+
static void v2m_power_off(void)
{
if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
@@ -418,8 +419,6 @@
{
int i;
- clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
-
platform_device_register(&v2m_pcie_i2c_device);
platform_device_register(&v2m_ddc_i2c_device);
platform_device_register(&v2m_flash_device);
diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c
index 245140c..642de04 100644
--- a/arch/arm/mach-vt8500/irq.c
+++ b/arch/arm/mach-vt8500/irq.c
@@ -39,9 +39,10 @@
static void __iomem *ic_regbase;
static void __iomem *sic_regbase;
-static void vt8500_irq_mask(unsigned int irq)
+static void vt8500_irq_mask(struct irq_data *d)
{
void __iomem *base = ic_regbase;
+ unsigned irq = d->irq;
u8 edge;
if (irq >= 64) {
@@ -64,9 +65,10 @@
}
}
-static void vt8500_irq_unmask(unsigned int irq)
+static void vt8500_irq_unmask(struct irq_data *d)
{
void __iomem *base = ic_regbase;
+ unsigned irq = d->irq;
u8 dctr;
if (irq >= 64) {
@@ -78,10 +80,11 @@
writeb(dctr, base + VT8500_IC_DCTR + irq);
}
-static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
+static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
{
void __iomem *base = ic_regbase;
- unsigned int orig_irq = irq;
+ unsigned irq = d->irq;
+ unsigned orig_irq = irq;
u8 dctr;
if (irq >= 64) {
@@ -114,11 +117,11 @@
}
static struct irq_chip vt8500_irq_chip = {
- .name = "vt8500",
- .ack = vt8500_irq_mask,
- .mask = vt8500_irq_mask,
- .unmask = vt8500_irq_unmask,
- .set_type = vt8500_irq_set_type,
+ .name = "vt8500",
+ .irq_ack = vt8500_irq_mask,
+ .irq_mask = vt8500_irq_mask,
+ .irq_unmask = vt8500_irq_unmask,
+ .irq_set_type = vt8500_irq_set_type,
};
void __init vt8500_init_irq(void)
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index ef59099..44c0867 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -120,17 +120,22 @@
spin_unlock_irqrestore(&l2x0_lock, flags);
}
+static void __l2x0_flush_all(void)
+{
+ debug_writel(0x03);
+ writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
+ cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
+ cache_sync();
+ debug_writel(0x00);
+}
+
static void l2x0_flush_all(void)
{
unsigned long flags;
/* clean all ways */
spin_lock_irqsave(&l2x0_lock, flags);
- debug_writel(0x03);
- writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
- cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
- cache_sync();
- debug_writel(0x00);
+ __l2x0_flush_all();
spin_unlock_irqrestore(&l2x0_lock, flags);
}
@@ -266,7 +271,9 @@
unsigned long flags;
spin_lock_irqsave(&l2x0_lock, flags);
- writel(0, l2x0_base + L2X0_CTRL);
+ __l2x0_flush_all();
+ writel_relaxed(0, l2x0_base + L2X0_CTRL);
+ dsb();
spin_unlock_irqrestore(&l2x0_lock, flags);
}
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 8bfae96..b0ee9ba 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -24,7 +24,9 @@
/*
* We fork()ed a process, and we need a new context for the child
- * to run in.
+ * to run in. We reserve version 0 for initial tasks so we will
+ * always allocate an ASID. The ASID 0 is reserved for the TTBR
+ * register changing sequence.
*/
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
@@ -34,11 +36,8 @@
static void flush_context(void)
{
- u32 ttb;
- /* Copy TTBR1 into TTBR0 */
- asm volatile("mrc p15, 0, %0, c2, c0, 1\n"
- "mcr p15, 0, %0, c2, c0, 0"
- : "=r" (ttb));
+ /* set the reserved ASID before flushing the TLB */
+ asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0));
isb();
local_flush_tlb_all();
if (icache_is_vivt_asid_tagged()) {
@@ -94,7 +93,7 @@
return;
smp_rmb();
- asid = cpu_last_asid + cpu;
+ asid = cpu_last_asid + cpu + 1;
flush_context();
set_mm_context(mm, asid);
@@ -144,13 +143,13 @@
* to start a new version and flush the TLB.
*/
if (unlikely((asid & ~ASID_MASK) == 0)) {
- asid = cpu_last_asid + smp_processor_id();
+ asid = cpu_last_asid + smp_processor_id() + 1;
flush_context();
#ifdef CONFIG_SMP
smp_wmb();
smp_call_function(reset_context, NULL, 1);
#endif
- cpu_last_asid += NR_CPUS - 1;
+ cpu_last_asid += NR_CPUS;
}
set_mm_context(mm, asid);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 2c2cce9..c19571c 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -331,6 +331,12 @@
#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (phys_initrd_size &&
+ !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) {
+ pr_err("INITRD: 0x%08lx+0x%08lx is not a memory region - disabling initrd\n",
+ phys_initrd_start, phys_initrd_size);
+ phys_initrd_start = phys_initrd_size = 0;
+ }
+ if (phys_initrd_size &&
memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) {
pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n",
phys_initrd_start, phys_initrd_size);
@@ -635,7 +641,8 @@
" modules : 0x%08lx - 0x%08lx (%4ld MB)\n"
" .init : 0x%p" " - 0x%p" " (%4d kB)\n"
" .text : 0x%p" " - 0x%p" " (%4d kB)\n"
- " .data : 0x%p" " - 0x%p" " (%4d kB)\n",
+ " .data : 0x%p" " - 0x%p" " (%4d kB)\n"
+ " .bss : 0x%p" " - 0x%p" " (%4d kB)\n",
MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
(PAGE_SIZE)),
@@ -657,7 +664,8 @@
MLK_ROUNDUP(__init_begin, __init_end),
MLK_ROUNDUP(_text, _etext),
- MLK_ROUNDUP(_sdata, _edata));
+ MLK_ROUNDUP(_sdata, _edata),
+ MLK_ROUNDUP(__bss_start, __bss_stop));
#undef MLK
#undef MLM
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 9d9e736..594d677 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -759,7 +759,7 @@
static phys_addr_t lowmem_limit __initdata = 0;
-static void __init sanity_check_meminfo(void)
+void __init sanity_check_meminfo(void)
{
int i, j, highmem = 0;
@@ -1032,8 +1032,9 @@
{
void *zero_page;
+ memblock_set_current_limit(lowmem_limit);
+
build_mem_type_table();
- sanity_check_meminfo();
prepare_page_table();
map_lowmem();
devicemaps_init(mdesc);
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 687d023..941a98c 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -27,6 +27,10 @@
memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
}
+void __init sanity_check_meminfo(void)
+{
+}
+
/*
* paging_init() sets up the page tables, initialises the zone memory
* maps, and sets up the zero page, bad page and bad page tables.
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index e4c165c..537ffcb 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -146,7 +146,7 @@
.long 0
.long 0
.long v4_cache_fns
- .size __arm7tdmi_proc_info, . - __arm7dmi_proc_info
+ .size __arm7tdmi_proc_info, . - __arm7tdmi_proc_info
.type __triscenda7_proc_info, #object
__triscenda7_proc_info:
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index 7b7ebd4..546b54d 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -116,7 +116,7 @@
.long 0
.long 0
.long v4_cache_fns
- .size __arm9tdmi_proc_info, . - __arm9dmi_proc_info
+ .size __arm9tdmi_proc_info, . - __arm9tdmi_proc_info
.type __p2001_proc_info, #object
__p2001_proc_info:
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index b3b566e..089c0b5 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -108,16 +108,18 @@
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
#endif
- mrc p15, 0, r2, c2, c0, 1 @ load TTB 1
- mcr p15, 0, r2, c2, c0, 0 @ into TTB 0
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
+ mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
+ isb
+1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
isb
#ifdef CONFIG_ARM_ERRATA_754322
dsb
#endif
mcr p15, 0, r1, c13, c0, 1 @ set context ID
isb
- mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
- isb
#endif
mov pc, lr
ENDPROC(cpu_v7_switch_mm)
@@ -208,19 +210,21 @@
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
-.equ cpu_v7_suspend_size, 4 * 8
+.equ cpu_v7_suspend_size, 4 * 9
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v7_do_suspend)
stmfd sp!, {r4 - r11, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
mrc p15, 0, r5, c13, c0, 1 @ Context ID
+ mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID
+ stmia r0!, {r4 - r6}
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
mrc p15, 0, r7, c2, c0, 0 @ TTB 0
mrc p15, 0, r8, c2, c0, 1 @ TTB 1
mrc p15, 0, r9, c1, c0, 0 @ Control register
mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
- stmia r0, {r4 - r11}
+ stmia r0, {r6 - r11}
ldmfd sp!, {r4 - r11, pc}
ENDPROC(cpu_v7_do_suspend)
@@ -228,9 +232,11 @@
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
- ldmia r0, {r4 - r11}
+ ldmia r0!, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 1 @ Context ID
+ mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID
+ ldmia r0, {r6 - r11}
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
mcr p15, 0, r7, c2, c0, 0 @ TTB 0
mcr p15, 0, r8, c2, c0, 1 @ TTB 1
@@ -416,9 +422,9 @@
.word cpu_v7_dcache_clean_area
.word cpu_v7_switch_mm
.word cpu_v7_set_pte_ext
- .word 0
- .word 0
- .word 0
+ .word cpu_v7_suspend_size
+ .word cpu_v7_do_suspend
+ .word cpu_v7_do_resume
.size v7_processor_functions, . - v7_processor_functions
.section ".rodata"
diff --git a/arch/arm/plat-iop/cp6.c b/arch/arm/plat-iop/cp6.c
index 9612a87..bab73e2 100644
--- a/arch/arm/plat-iop/cp6.c
+++ b/arch/arm/plat-iop/cp6.c
@@ -18,6 +18,7 @@
*/
#include <linux/init.h>
#include <asm/traps.h>
+#include <asm/ptrace.h>
static int cp6_trap(struct pt_regs *regs, unsigned int instr)
{
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
index 3538b85e..b130f60 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -139,7 +139,7 @@
#endif
#ifdef CONFIG_SOC_IMX51
-static struct sdma_script_start_addrs addr_imx51_to1 = {
+static struct sdma_script_start_addrs addr_imx51 = {
.ap_2_ap_addr = 642,
.uart_2_mcu_addr = 817,
.mcu_2_app_addr = 747,
@@ -196,7 +196,9 @@
#if defined(CONFIG_SOC_IMX51)
if (cpu_is_mx51()) {
- imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1;
+ int to_version = mx51_revision() >> 4;
+ imx51_imx_sdma_data.pdata.to_version = to_version;
+ imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51;
ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
} else
#endif
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
index ea19a5b..d5d7e65 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -90,6 +90,7 @@
int num_gpio;
u32 (*get_secondary_status)(unsigned int bank);
void (*set_ioforce)(bool enable);
+ bool supports_sleepmode;
};
#endif /* __ASM_PLAT_GPIO_H */
diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h
index 3083195..0d88499 100644
--- a/arch/arm/plat-omap/include/plat/flash.h
+++ b/arch/arm/plat-omap/include/plat/flash.h
@@ -11,6 +11,7 @@
#include <linux/mtd/map.h>
+struct platform_device;
extern void omap1_set_vpp(struct platform_device *pdev, int enable);
#endif
diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
index 32a2f6c..e992b96 100644
--- a/arch/arm/plat-omap/include/plat/iovmm.h
+++ b/arch/arm/plat-omap/include/plat/iovmm.h
@@ -29,9 +29,6 @@
* lower 16 bit is used for h/w and upper 16 bit is for s/w.
*/
#define IOVMF_SW_SHIFT 16
-#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT)
-#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1)
-#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL
/*
* iovma: h/w flags derived from cam and ram attribute
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index f38fef9..c7b8741 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -101,6 +101,9 @@
/* If using power_saving and the MMC power is not to go off */
unsigned no_off:1;
+ /* eMMC does not handle power off when not in sleep state */
+ unsigned no_regulator_off_init:1;
+
/* Regulator off remapped to sleep */
unsigned vcc_aux_disable_is_sleep:1;
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 51ef43e..83a37c5 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -648,7 +648,6 @@
return PTR_ERR(va);
}
- flags &= IOVMF_HW_MASK;
flags |= IOVMF_DISCONT;
flags |= IOVMF_MMIO;
@@ -706,7 +705,6 @@
if (!va)
return -ENOMEM;
- flags &= IOVMF_HW_MASK;
flags |= IOVMF_DISCONT;
flags |= IOVMF_ALLOC;
@@ -795,7 +793,6 @@
if (!va)
return -ENOMEM;
- flags &= IOVMF_HW_MASK;
flags |= IOVMF_LINEAR;
flags |= IOVMF_MMIO;
@@ -853,7 +850,6 @@
return -ENOMEM;
pa = virt_to_phys(va);
- flags &= IOVMF_HW_MASK;
flags |= IOVMF_LINEAR;
flags |= IOVMF_ALLOC;
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index a37b8eb..49fc0df 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -84,6 +84,7 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/pm_runtime.h>
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
@@ -539,20 +540,34 @@
static int _od_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
+ int ret;
- return omap_device_idle(pdev);
+ ret = pm_generic_runtime_suspend(dev);
+
+ if (!ret)
+ omap_device_idle(pdev);
+
+ return ret;
+}
+
+static int _od_runtime_idle(struct device *dev)
+{
+ return pm_generic_runtime_idle(dev);
}
static int _od_runtime_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
- return omap_device_enable(pdev);
+ omap_device_enable(pdev);
+
+ return pm_generic_runtime_resume(dev);
}
static struct dev_power_domain omap_device_power_domain = {
.ops = {
.runtime_suspend = _od_runtime_suspend,
+ .runtime_idle = _od_runtime_idle,
.runtime_resume = _od_runtime_resume,
USE_PLATFORM_PM_SLEEP_OPS
}
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index a3f50b3..6af3d0b 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -166,7 +166,7 @@
else if (cpu_is_omap1611())
omap_sram_size = SZ_256K;
else {
- printk(KERN_ERR "Could not detect SRAM size\n");
+ pr_err("Could not detect SRAM size\n");
omap_sram_size = 0x4000;
}
}
@@ -221,10 +221,10 @@
omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
- printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
- __pfn_to_phys(omap_sram_io_desc[0].pfn),
- omap_sram_io_desc[0].virtual,
- omap_sram_io_desc[0].length);
+ pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n",
+ (long long) __pfn_to_phys(omap_sram_io_desc[0].pfn),
+ omap_sram_io_desc[0].virtual,
+ omap_sram_io_desc[0].length);
/*
* Normally devicemaps_init() would flush caches and tlb after
@@ -252,7 +252,7 @@
void *omap_sram_push_address(unsigned long size)
{
if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
- printk(KERN_ERR "Not enough space in SRAM\n");
+ pr_err("Not enough space in SRAM\n");
return NULL;
}
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 5b4fffa..41ab97e 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -432,7 +432,7 @@
ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF;
ct->regs.ack = GPIO_EDGE_CAUSE_OFF;
ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- ct->chip.irq_ack = irq_gc_ack;
+ ct->chip.irq_ack = irq_gc_ack_clr_bit;
ct->chip.irq_mask = irq_gc_mask_clr_bit;
ct->chip.irq_unmask = irq_gc_mask_set_bit;
ct->chip.irq_set_type = gpio_irq_set_type;
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index 48ebb94..a11dc36 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -50,7 +50,7 @@
return container_of(c, struct pxa_gpio_chip, chip)->regbase;
}
-static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio)
+static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)
{
return &pxa_gpio_chips[gpio_to_bank(gpio)];
}
@@ -161,7 +161,7 @@
int gpio = irq_to_gpio(d->irq);
unsigned long gpdr, mask = GPIO_bit(gpio);
- c = gpio_to_chip(gpio);
+ c = gpio_to_pxachip(gpio);
if (type == IRQ_TYPE_PROBE) {
/* Don't mess with enabled GPIOs using preconfigured edges or
@@ -230,7 +230,7 @@
static void pxa_ack_muxed_gpio(struct irq_data *d)
{
int gpio = irq_to_gpio(d->irq);
- struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+ struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
}
@@ -238,7 +238,7 @@
static void pxa_mask_muxed_gpio(struct irq_data *d)
{
int gpio = irq_to_gpio(d->irq);
- struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+ struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
uint32_t grer, gfer;
c->irq_mask &= ~GPIO_bit(gpio);
@@ -252,7 +252,7 @@
static void pxa_unmask_muxed_gpio(struct irq_data *d)
{
int gpio = irq_to_gpio(d->irq);
- struct pxa_gpio_chip *c = gpio_to_chip(gpio);
+ struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
c->irq_mask |= GPIO_bit(gpio);
update_edge_detect(c);
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index c10d10c..539bd0e 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -712,7 +712,7 @@
* get control of an dma channel
*/
-int s3c2410_dma_request(unsigned int channel,
+int s3c2410_dma_request(enum dma_ch channel,
struct s3c2410_dma_client *client,
void *dev)
{
@@ -783,7 +783,7 @@
* allowed to go through.
*/
-int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
unsigned long flags;
@@ -974,7 +974,7 @@
}
int
-s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -1021,23 +1021,19 @@
* xfersize: size of unit in bytes (1,2,4)
*/
-int s3c2410_dma_config(unsigned int channel,
+int s3c2410_dma_config(enum dma_ch channel,
int xferunit)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
unsigned int dcon;
- pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
- __func__, channel, xferunit, dcon);
+ pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit);
if (chan == NULL)
return -EINVAL;
- pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
-
dcon = chan->dcon & dma_sel.dcon_mask;
-
- pr_debug("%s: New dcon is %08x\n", __func__, dcon);
+ pr_debug("%s: dcon is %08x\n", __func__, dcon);
switch (chan->req_ch) {
case DMACH_I2S_IN:
@@ -1104,7 +1100,7 @@
* devaddr: physical address of the source
*/
-int s3c2410_dma_devconfig(unsigned int channel,
+int s3c2410_dma_devconfig(enum dma_ch channel,
enum s3c2410_dmasrc source,
unsigned long devaddr)
{
@@ -1177,7 +1173,7 @@
* returns the current transfer points for the dma source and destination
*/
-int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
+int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -1199,7 +1195,7 @@
#ifdef CONFIG_PM
-static void s3c2410_dma_suspend_chan(s3c2410_dma_chan *cp)
+static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp)
{
printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
@@ -1235,7 +1231,7 @@
/* restore channel's hardware configuration */
if (!cp->in_use)
- return 0;
+ return;
printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
@@ -1246,8 +1242,6 @@
if (cp->map != NULL)
dma_sel.select(cp, cp->map);
-
- return 0;
}
static void s3c2410_dma_resume(void)
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 9aee7e1..fc8c5f8 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -668,3 +669,8 @@
irqdbf("s3c2410: registered interrupt handlers\n");
}
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
+};
diff --git a/arch/arm/plat-s5p/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c
index 6db9262..20336c8 100644
--- a/arch/arm/plat-s5p/dev-onenand.c
+++ b/arch/arm/plat-s5p/dev-onenand.c
@@ -15,8 +15,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
#include <mach/irqs.h>
#include <mach/map.h>
@@ -45,13 +43,3 @@
.num_resources = ARRAY_SIZE(s5p_onenand_resources),
.resource = s5p_onenand_resources,
};
-
-void s5p_onenand_set_platdata(struct onenand_platform_data *pdata)
-{
- struct onenand_platform_data *pd;
-
- pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
- if (!pd)
- printk(KERN_ERR "%s: no memory for platform data\n", __func__);
- s5p_device_onenand.dev.platform_data = pd;
-}
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
index a6c3d32..d973d39 100644
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -39,7 +39,7 @@
#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000)
-#define S5P_VA_USB_HSPHY S3C_ADDR(0x02900000)
+#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index 135abda..327ab9f 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -152,7 +152,7 @@
if (!gc)
return -ENOMEM;
ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
ct->chip.irq_set_type = s5p_gpioint_set_type,
diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c
index 899a8cc..612934c 100644
--- a/arch/arm/plat-s5p/s5p-time.c
+++ b/arch/arm/plat-s5p/s5p-time.c
@@ -370,11 +370,11 @@
clock_rate = clk_get_rate(tin_source);
- init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
-
s5p_time_setup(timer_source.source_id, TCNT_MAX);
s5p_time_start(timer_source.source_id, PERIODIC);
+ init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate);
+
if (clocksource_register_hz(&time_clocksource, clock_rate))
panic("%s: can't register clocksource\n", time_clocksource.name);
}
diff --git a/arch/arm/plat-samsung/dev-onenand.c b/arch/arm/plat-samsung/dev-onenand.c
index 45ec732..f54ae71 100644
--- a/arch/arm/plat-samsung/dev-onenand.c
+++ b/arch/arm/plat-samsung/dev-onenand.c
@@ -13,8 +13,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
#include <mach/irqs.h>
#include <mach/map.h>
@@ -43,13 +41,3 @@
.num_resources = ARRAY_SIZE(s3c_onenand_resources),
.resource = s3c_onenand_resources,
};
-
-void s3c_onenand_set_platdata(struct onenand_platform_data *pdata)
-{
- struct onenand_platform_data *pd;
-
- pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
- if (!pd)
- printk(KERN_ERR "%s: no memory for platform data\n", __func__);
- s3c_device_onenand.dev.platform_data = pd;
-}
diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c
index cb459dd..6143aa1 100644
--- a/arch/arm/plat-samsung/dma.c
+++ b/arch/arm/plat-samsung/dma.c
@@ -41,7 +41,7 @@
* irq?
*/
-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -56,7 +56,7 @@
}
EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@@ -71,7 +71,7 @@
}
EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index b61b8ee..e3b31c2 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -12,6 +12,10 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#ifndef __PLAT_DEVS_H
+#define __PLAT_DEVS_H __FILE__
+
#include <linux/platform_device.h>
struct s3c24xx_uart_resources {
@@ -75,10 +79,8 @@
extern struct platform_device s5pc100_device_spi2;
extern struct platform_device s5pv210_device_spi0;
extern struct platform_device s5pv210_device_spi1;
-extern struct platform_device s5p6440_device_spi0;
-extern struct platform_device s5p6440_device_spi1;
-extern struct platform_device s5p6450_device_spi0;
-extern struct platform_device s5p6450_device_spi1;
+extern struct platform_device s5p64x0_device_spi0;
+extern struct platform_device s5p64x0_device_spi1;
extern struct platform_device s3c_device_hwmon;
@@ -161,3 +163,5 @@
*/
extern void *s3c_set_platdata(void *pd, size_t pdsize,
struct platform_device *pdev);
+
+#endif /* __PLAT_DEVS_H */
diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
index 2e8f8c6..8c273b7 100644
--- a/arch/arm/plat-samsung/include/plat/dma.h
+++ b/arch/arm/plat-samsung/include/plat/dma.h
@@ -42,6 +42,7 @@
};
struct s3c2410_dma_chan;
+enum dma_ch;
/* s3c2410_dma_cbfn_t
*
@@ -62,7 +63,7 @@
* request a dma channel exclusivley
*/
-extern int s3c2410_dma_request(unsigned int channel,
+extern int s3c2410_dma_request(enum dma_ch channel,
struct s3c2410_dma_client *, void *dev);
@@ -71,14 +72,14 @@
* change the state of the dma channel
*/
-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op);
/* s3c2410_dma_setflags
*
* set the channel's flags to a given state
*/
-extern int s3c2410_dma_setflags(unsigned int channel,
+extern int s3c2410_dma_setflags(enum dma_ch channel,
unsigned int flags);
/* s3c2410_dma_free
@@ -86,7 +87,7 @@
* free the dma channel (will also abort any outstanding operations)
*/
-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *);
/* s3c2410_dma_enqueue
*
@@ -95,7 +96,7 @@
* drained before the buffer is given to the DMA system.
*/
-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
dma_addr_t data, int size);
/* s3c2410_dma_config
@@ -103,14 +104,14 @@
* configure the dma channel
*/
-extern int s3c2410_dma_config(unsigned int channel, int xferunit);
+extern int s3c2410_dma_config(enum dma_ch channel, int xferunit);
/* s3c2410_dma_devconfig
*
* configure the device we're talking to
*/
-extern int s3c2410_dma_devconfig(unsigned int channel,
+extern int s3c2410_dma_devconfig(enum dma_ch channel,
enum s3c2410_dmasrc source, unsigned long devaddr);
/* s3c2410_dma_getposition
@@ -118,10 +119,10 @@
* get the position that the dma transfer is currently at
*/
-extern int s3c2410_dma_getposition(unsigned int channel,
+extern int s3c2410_dma_getposition(enum dma_ch channel,
dma_addr_t *src, dma_addr_t *dest);
-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index c151c5f..116edfe 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -224,6 +224,8 @@
#define S5PV210_UFSTAT_RXMASK (255<<0)
#define S5PV210_UFSTAT_RXSHIFT (0)
+#define NO_NEED_CHECK_CLKSRC 1
+
#ifndef __ASSEMBLY__
/* struct s3c24xx_uart_clksrc
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index 0ffe34a..4c16fa3 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -39,6 +39,7 @@
* @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6
* @rx_lvl_offset: Depends on tx fifo_lvl field and bus number
* @high_speed: If the controller supports HIGH_SPEED_EN bit
+ * @tx_st_done: Depends on tx fifo_lvl field
*/
struct s3c64xx_spi_info {
int src_clk_nr;
@@ -53,6 +54,7 @@
int fifo_lvl_mask;
int rx_lvl_offset;
int high_speed;
+ int tx_st_done;
};
/**
diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c
index 32582c0..657405c 100644
--- a/arch/arm/plat-samsung/irq-uart.c
+++ b/arch/arm/plat-samsung/irq-uart.c
@@ -54,8 +54,15 @@
gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base,
handle_level_irq);
+
+ if (!gc) {
+ pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n",
+ __func__, uirq->base_irq);
+ return;
+ }
+
ct = gc->chip_types;
- ct->chip.irq_ack = irq_gc_ack;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
ct->chip.irq_mask = irq_gc_mask_set_bit;
ct->chip.irq_unmask = irq_gc_mask_clr_bit;
ct->regs.ack = S3C64XX_UINTP;
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
index a607546..f714d06 100644
--- a/arch/arm/plat-samsung/irq-vic-timer.c
+++ b/arch/arm/plat-samsung/irq-vic-timer.c
@@ -54,6 +54,13 @@
s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
S3C64XX_TINT_CSTAT, handle_level_irq);
+
+ if (!s3c_tgc) {
+ pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n",
+ __func__, timer_irq);
+ return;
+ }
+
ct = s3c_tgc->chip_types;
ct->chip.irq_mask = irq_gc_mask_clr_bit;
ct->chip.irq_unmask = irq_gc_mask_set_bit;
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 6f9ca56..a06bfcc 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -5,6 +5,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
index 7eece0a..d8f1fe8 100644
--- a/arch/avr32/configs/atngw100_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
@@ -5,6 +5,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
index 387eb9d..d4c5b19 100644
--- a/arch/avr32/configs/atngw100_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
@@ -5,6 +5,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig
index 19f6cee..77ca4f9 100644
--- a/arch/avr32/configs/atngw100_mrmt_defconfig
+++ b/arch/avr32/configs/atngw100_mrmt_defconfig
@@ -7,6 +7,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_SLUB_DEBUG is not set
@@ -109,7 +110,7 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_AT32AP700X=m
CONFIG_DMADEVICES=y
diff --git a/arch/avr32/configs/atngw100mkii_defconfig b/arch/avr32/configs/atngw100mkii_defconfig
index f0fe237..6e0dca4 100644
--- a/arch/avr32/configs/atngw100mkii_defconfig
+++ b/arch/avr32/configs/atngw100mkii_defconfig
@@ -5,6 +5,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
index e4a7c1d..7f2a344 100644
--- a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig
@@ -5,6 +5,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
index 6f37f70..085eeba 100644
--- a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig
@@ -5,6 +5,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index 4fb01f5..d1a887e 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -5,6 +5,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 9faaf9b..956f281 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -5,6 +5,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 3d2a5d8..40c69f3 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -5,6 +5,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
index 1ed8f22..511eb8a 100644
--- a/arch/avr32/configs/atstk1006_defconfig
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -5,6 +5,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
index aeadc95..19973b0 100644
--- a/arch/avr32/configs/favr-32_defconfig
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -6,6 +6,7 @@
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig
index 1692bee..6f45681 100644
--- a/arch/avr32/configs/hammerhead_defconfig
+++ b/arch/avr32/configs/hammerhead_defconfig
@@ -7,6 +7,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/configs/merisc_defconfig b/arch/avr32/configs/merisc_defconfig
index 8b670a6..3befab9 100644
--- a/arch/avr32/configs/merisc_defconfig
+++ b/arch/avr32/configs/merisc_defconfig
@@ -7,6 +7,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
CONFIG_MODULES=y
diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig
index 5a51f2e..1bee51f 100644
--- a/arch/avr32/configs/mimc200_defconfig
+++ b/arch/avr32/configs/mimc200_defconfig
@@ -7,6 +7,7 @@
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set
diff --git a/arch/avr32/include/asm/processor.h b/arch/avr32/include/asm/processor.h
index 49a88f5..108502b 100644
--- a/arch/avr32/include/asm/processor.h
+++ b/arch/avr32/include/asm/processor.h
@@ -131,7 +131,6 @@
*/
#define start_thread(regs, new_pc, new_sp) \
do { \
- set_fs(USER_DS); \
memset(regs, 0, sizeof(*regs)); \
regs->sr = MODE_USER; \
regs->pc = new_pc & ~1; \
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index aa677e2..7fbf0dc 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1043,8 +1043,9 @@
data->regs = (void __iomem *)pdev->resource[0].start;
}
+ pdev->id = line;
pdata = pdev->dev.platform_data;
- pdata->num = portnr;
+ pdata->num = line;
at32_usarts[line] = pdev;
}
diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h
index 9c96a13..8181293 100644
--- a/arch/avr32/mach-at32ap/include/mach/cpu.h
+++ b/arch/avr32/mach-at32ap/include/mach/cpu.h
@@ -31,8 +31,20 @@
#define cpu_is_at91sam9263() (0)
#define cpu_is_at91sam9rl() (0)
#define cpu_is_at91cap9() (0)
+#define cpu_is_at91cap9_revB() (0)
+#define cpu_is_at91cap9_revC() (0)
#define cpu_is_at91sam9g10() (0)
+#define cpu_is_at91sam9g20() (0)
#define cpu_is_at91sam9g45() (0)
#define cpu_is_at91sam9g45es() (0)
+#define cpu_is_at91sam9m10() (0)
+#define cpu_is_at91sam9g46() (0)
+#define cpu_is_at91sam9m11() (0)
+#define cpu_is_at91sam9x5() (0)
+#define cpu_is_at91sam9g15() (0)
+#define cpu_is_at91sam9g35() (0)
+#define cpu_is_at91sam9x35() (0)
+#define cpu_is_at91sam9g25() (0)
+#define cpu_is_at91sam9x25() (0)
#endif /* __ASM_ARCH_CPU_H */
diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
index 3e36461..c9ac2f8 100644
--- a/arch/avr32/mach-at32ap/intc.c
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -167,14 +167,12 @@
return 0;
}
-static int intc_resume(void)
+static void intc_resume(void)
{
int i;
for (i = 0; i < 64; i++)
intc_writel(&intc0, INTPR0 + 4 * i, intc0.saved_ipr[i]);
-
- return 0;
}
#else
#define intc_suspend NULL
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 31d9542..9f1d084 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -112,7 +112,7 @@
CONFIG_USB_G_PRINTER=m
CONFIG_MMC=m
CONFIG_SDH_BFIN=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_BFIN=m
CONFIG_EXT2_FS=m
# CONFIG_DNOTIFY is not set
diff --git a/arch/m32r/include/asm/mmzone.h b/arch/m32r/include/asm/mmzone.h
index 9f3b5ac..115ced3 100644
--- a/arch/m32r/include/asm/mmzone.h
+++ b/arch/m32r/include/asm/mmzone.h
@@ -14,12 +14,6 @@
#define NODE_DATA(nid) (node_data[nid])
#define node_localnr(pfn, nid) ((pfn) - NODE_DATA(nid)->node_start_pfn)
-#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid) \
-({ \
- pg_data_t *__pgdat = NODE_DATA(nid); \
- __pgdat->node_start_pfn + __pgdat->node_spanned_pages - 1; \
-})
#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
/*
@@ -44,7 +38,7 @@
int node;
for (node = 0 ; node < MAX_NUMNODES ; node++)
- if (pfn >= node_start_pfn(node) && pfn <= node_end_pfn(node))
+ if (pfn >= node_start_pfn(node) && pfn < node_end_pfn(node))
break;
return node;
diff --git a/arch/m68k/Kconfig.nommu b/arch/m68k/Kconfig.nommu
index fc98f9b..b004dc1 100644
--- a/arch/m68k/Kconfig.nommu
+++ b/arch/m68k/Kconfig.nommu
@@ -14,6 +14,33 @@
bool
default n
+config M68000
+ bool
+ help
+ The Freescale (was Motorola) 68000 CPU is the first generation of
+ the well known M68K family of processors. The CPU core as well as
+ being available as a stand alone CPU was also used in many
+ System-On-Chip devices (eg 68328, 68302, etc). It does not contain
+ a paging MMU.
+
+config MCPU32
+ bool
+ help
+ The Freescale (was then Motorola) CPU32 is a CPU core that is
+ based on the 68020 processor. For the most part it is used in
+ System-On-Chip parts, and does not contain a paging MMU.
+
+config COLDFIRE
+ bool
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ The Freescale ColdFire family of processors is a modern derivitive
+ of the 68000 processor family. They are mainly targeted at embedded
+ applications, and are all System-On-Chip (SOC) devices, as opposed
+ to stand alone CPUs. They implement a subset of the original 68000
+ processor instruction set.
+
config COLDFIRE_SW_A7
bool
default n
@@ -36,26 +63,31 @@
config M68328
bool "MC68328"
+ select M68000
help
Motorola 68328 processor support.
config M68EZ328
bool "MC68EZ328"
+ select M68000
help
Motorola 68EX328 processor support.
config M68VZ328
bool "MC68VZ328"
+ select M68000
help
Motorola 68VZ328 processor support.
config M68360
bool "MC68360"
+ select MCPU32
help
Motorola 68360 processor support.
config M5206
bool "MCF5206"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
@@ -63,6 +95,7 @@
config M5206e
bool "MCF5206e"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
@@ -70,6 +103,7 @@
config M520x
bool "MCF520x"
+ select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
help
@@ -77,6 +111,7 @@
config M523x
bool "MCF523x"
+ select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
@@ -85,6 +120,7 @@
config M5249
bool "MCF5249"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
@@ -92,6 +128,7 @@
config M5271
bool "MCF5271"
+ select COLDFIRE
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -99,6 +136,7 @@
config M5272
bool "MCF5272"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
@@ -106,6 +144,7 @@
config M5275
bool "MCF5275"
+ select COLDFIRE
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@@ -113,6 +152,7 @@
config M528x
bool "MCF528x"
+ select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
@@ -121,6 +161,7 @@
config M5307
bool "MCF5307"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
@@ -129,12 +170,14 @@
config M532x
bool "MCF532x"
+ select COLDFIRE
select HAVE_CACHE_CB
help
Freescale (Motorola) ColdFire 532x processor support.
config M5407
bool "MCF5407"
+ select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
@@ -143,6 +186,7 @@
config M547x
bool "MCF547x"
+ select COLDFIRE
select HAVE_CACHE_CB
select HAVE_MBAR
help
@@ -150,6 +194,7 @@
config M548x
bool "MCF548x"
+ select COLDFIRE
select HAVE_CACHE_CB
select HAVE_MBAR
help
@@ -168,13 +213,6 @@
depends on (M548x || M547x)
default y
-config COLDFIRE
- bool
- depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M54xx)
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- default y
-
config CLOCK_SET
bool "Enable setting the CPU clock frequency"
default n
diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c
index 33f8276..1b7a14d 100644
--- a/arch/m68k/kernel/m68k_ksyms.c
+++ b/arch/m68k/kernel/m68k_ksyms.c
@@ -14,8 +14,7 @@
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__muldi3);
-#if !defined(__mc68020__) && !defined(__mc68030__) && \
- !defined(__mc68040__) && !defined(__mc68060__) && !defined(__mcpu32__)
+#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
/*
* Simpler 68k and ColdFire parts also need a few other gcc functions.
*/
diff --git a/arch/m68k/kernel/vmlinux.lds_no.S b/arch/m68k/kernel/vmlinux.lds_no.S
index f4d715cd..7dc4087 100644
--- a/arch/m68k/kernel/vmlinux.lds_no.S
+++ b/arch/m68k/kernel/vmlinux.lds_no.S
@@ -84,52 +84,52 @@
/* Kernel symbol table: Normal symbols */
. = ALIGN(4);
__start___ksymtab = .;
- *(__ksymtab)
+ *(SORT(___ksymtab+*))
__stop___ksymtab = .;
/* Kernel symbol table: GPL-only symbols */
__start___ksymtab_gpl = .;
- *(__ksymtab_gpl)
+ *(SORT(___ksymtab_gpl+*))
__stop___ksymtab_gpl = .;
/* Kernel symbol table: Normal unused symbols */
__start___ksymtab_unused = .;
- *(__ksymtab_unused)
+ *(SORT(___ksymtab_unused+*))
__stop___ksymtab_unused = .;
/* Kernel symbol table: GPL-only unused symbols */
__start___ksymtab_unused_gpl = .;
- *(__ksymtab_unused_gpl)
+ *(SORT(___ksymtab_unused_gpl+*))
__stop___ksymtab_unused_gpl = .;
/* Kernel symbol table: GPL-future symbols */
__start___ksymtab_gpl_future = .;
- *(__ksymtab_gpl_future)
+ *(SORT(___ksymtab_gpl_future+*))
__stop___ksymtab_gpl_future = .;
/* Kernel symbol table: Normal symbols */
__start___kcrctab = .;
- *(__kcrctab)
+ *(SORT(___kcrctab+*))
__stop___kcrctab = .;
/* Kernel symbol table: GPL-only symbols */
__start___kcrctab_gpl = .;
- *(__kcrctab_gpl)
+ *(SORT(___kcrctab_gpl+*))
__stop___kcrctab_gpl = .;
/* Kernel symbol table: Normal unused symbols */
__start___kcrctab_unused = .;
- *(__kcrctab_unused)
+ *(SORT(___kcrctab_unused+*))
__stop___kcrctab_unused = .;
/* Kernel symbol table: GPL-only unused symbols */
__start___kcrctab_unused_gpl = .;
- *(__kcrctab_unused_gpl)
+ *(SORT(___kcrctab_unused_gpl+*))
__stop___kcrctab_unused_gpl = .;
/* Kernel symbol table: GPL-future symbols */
__start___kcrctab_gpl_future = .;
- *(__kcrctab_gpl_future)
+ *(SORT(___kcrctab_gpl_future+*))
__stop___kcrctab_gpl_future = .;
/* Kernel symbol table: strings */
diff --git a/arch/m68k/lib/memcpy.c b/arch/m68k/lib/memcpy.c
index 62182c8..0648893 100644
--- a/arch/m68k/lib/memcpy.c
+++ b/arch/m68k/lib/memcpy.c
@@ -34,8 +34,10 @@
if (temp) {
long *lto = to;
const long *lfrom = from;
-#if defined(__mc68020__) || defined(__mc68030__) || \
- defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__)
+#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
+ for (; temp; temp--)
+ *lto++ = *lfrom++;
+#else
asm volatile (
" movel %2,%3\n"
" andw #7,%3\n"
@@ -56,9 +58,6 @@
" jpl 4b"
: "=a" (lfrom), "=a" (lto), "=d" (temp), "=&d" (temp1)
: "0" (lfrom), "1" (lto), "2" (temp));
-#else
- for (; temp; temp--)
- *lto++ = *lfrom++;
#endif
to = lto;
from = lfrom;
diff --git a/arch/m68k/lib/memset.c b/arch/m68k/lib/memset.c
index f649e6a..8a7639f 100644
--- a/arch/m68k/lib/memset.c
+++ b/arch/m68k/lib/memset.c
@@ -32,8 +32,10 @@
temp = count >> 2;
if (temp) {
long *ls = s;
-#if defined(__mc68020__) || defined(__mc68030__) || \
- defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__)
+#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
+ for (; temp; temp--)
+ *ls++ = c;
+#else
size_t temp1;
asm volatile (
" movel %1,%2\n"
@@ -55,9 +57,6 @@
" jpl 1b"
: "=a" (ls), "=d" (temp), "=&d" (temp1)
: "d" (c), "0" (ls), "1" (temp));
-#else
- for (; temp; temp--)
- *ls++ = c;
#endif
s = ls;
}
diff --git a/arch/m68k/lib/muldi3.c b/arch/m68k/lib/muldi3.c
index 079bafca..79e928a 100644
--- a/arch/m68k/lib/muldi3.c
+++ b/arch/m68k/lib/muldi3.c
@@ -19,17 +19,7 @@
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-#if defined(__mc68020__) || defined(__mc68030__) || \
- defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__)
-
-#define umul_ppmm(w1, w0, u, v) \
- __asm__ ("mulu%.l %3,%1:%0" \
- : "=d" ((USItype)(w0)), \
- "=d" ((USItype)(w1)) \
- : "%0" ((USItype)(u)), \
- "dmi" ((USItype)(v)))
-
-#else
+#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
#define SI_TYPE_SIZE 32
#define __BITS4 (SI_TYPE_SIZE / 4)
@@ -61,6 +51,15 @@
(w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
} while (0)
+#else
+
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("mulu%.l %3,%1:%0" \
+ : "=d" ((USItype)(w0)), \
+ "=d" ((USItype)(w1)) \
+ : "%0" ((USItype)(u)), \
+ "dmi" ((USItype)(v)))
+
#endif
#define __umulsidi3(u, v) \
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 37862b2..807c97e 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -678,7 +678,7 @@
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_DS1307=m
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index c018696..5c74eb7 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -14,7 +14,7 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
-#include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <asm/i8259.h>
@@ -215,14 +215,13 @@
}
}
-static int i8259A_resume(struct sys_device *dev)
+static void i8259A_resume(void)
{
if (i8259A_auto_eoi >= 0)
init_8259A(i8259A_auto_eoi);
- return 0;
}
-static int i8259A_shutdown(struct sys_device *dev)
+static void i8259A_shutdown(void)
{
/* Put the i8259A into a quiescent state that
* the kernel initialization code can get it
@@ -232,26 +231,17 @@
outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */
outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */
}
- return 0;
}
-static struct sysdev_class i8259_sysdev_class = {
- .name = "i8259",
+static struct syscore_ops i8259_syscore_ops = {
.resume = i8259A_resume,
.shutdown = i8259A_shutdown,
};
-static struct sys_device device_i8259A = {
- .id = 0,
- .cls = &i8259_sysdev_class,
-};
-
static int __init i8259A_init_sysfs(void)
{
- int error = sysdev_class_register(&i8259_sysdev_class);
- if (!error)
- error = sysdev_register(&device_i8259A);
- return error;
+ register_syscore_ops(&i8259_syscore_ops);
+ return 0;
}
device_initcall(i8259A_init_sysfs);
diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
index 3d6e60d..780560b 100644
--- a/arch/mn10300/include/asm/uaccess.h
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -15,6 +15,7 @@
* User space memory access functions
*/
#include <linux/thread_info.h>
+#include <linux/kernel.h>
#include <asm/page.h>
#include <asm/errno.h>
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index f03cb27..bd3e5e7 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -28,7 +28,7 @@
#include <linux/irq.h>
#include <asm/processor.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/atomic.h>
#include <asm/smp.h>
@@ -156,7 +156,7 @@
case EXCEP_TRAP:
case EXCEP_UNIMPINS:
- if (get_user(opcode, (uint8_t __user *)regs->pc) != 0)
+ if (probe_kernel_read(&opcode, (u8 *)regs->pc, 1) < 0)
break;
if (opcode == 0xff) {
if (notify_die(DIE_BREAKPOINT, str, regs, code, 0, 0))
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index 6f702a6..13c4814 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -44,6 +44,7 @@
RO_DATA(PAGE_SIZE)
/* writeable */
+ _sdata = .; /* Start of rw data section */
RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
_edata = .;
diff --git a/arch/mn10300/mm/cache-dbg-flush-by-reg.S b/arch/mn10300/mm/cache-dbg-flush-by-reg.S
index 665919f..a775ea5 100644
--- a/arch/mn10300/mm/cache-dbg-flush-by-reg.S
+++ b/arch/mn10300/mm/cache-dbg-flush-by-reg.S
@@ -120,14 +120,14 @@
# conditionally purge this line in all ways
mov d1,(L1_CACHE_WAYDISP*0,a0)
-debugger_local_cache_flushinv_no_dcache:
+debugger_local_cache_flushinv_one_no_dcache:
#
# now try to flush the icache
#
mov CHCTR,a0
movhu (a0),d0
btst CHCTR_ICEN,d0
- beq mn10300_local_icache_inv_range_reg_end
+ beq debugger_local_cache_flushinv_one_end
LOCAL_CLI_SAVE(d1)
diff --git a/arch/parisc/include/asm/mmzone.h b/arch/parisc/include/asm/mmzone.h
index 9608d2c..e67eb9c 100644
--- a/arch/parisc/include/asm/mmzone.h
+++ b/arch/parisc/include/asm/mmzone.h
@@ -14,13 +14,6 @@
#define NODE_DATA(nid) (&node_data[nid].pg_data)
-#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid) \
-({ \
- pg_data_t *__pgdat = NODE_DATA(nid); \
- __pgdat->node_start_pfn + __pgdat->node_spanned_pages; \
-})
-
/* We have these possible memory map layouts:
* Astro: 0-3.75, 67.75-68, 4-64
* zx1: 0-1, 257-260, 4-256
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 3d80c3e..12da77e 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -1,5 +1,4 @@
addnote
-dtc
empty.c
hack-coff
infblock.c
diff --git a/arch/powerpc/boot/dtc-src/.gitignore b/arch/powerpc/boot/dtc-src/.gitignore
deleted file mode 100644
index a7c3f94..0000000
--- a/arch/powerpc/boot/dtc-src/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-dtc-lexer.lex.c
-dtc-parser.tab.c
-dtc-parser.tab.h
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index 4f685a7..98d9426 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -209,8 +209,10 @@
wm8776:codec@1a {
compatible = "wlf,wm8776";
reg = <0x1a>;
- /* MCLK source is a stand-alone oscillator */
- clock-frequency = <12288000>;
+ /*
+ * clock-frequency will be set by U-Boot if
+ * the clock is enabled.
+ */
};
};
@@ -280,7 +282,8 @@
codec-handle = <&wm8776>;
fsl,playback-dma = <&dma00>;
fsl,capture-dma = <&dma01>;
- fsl,fifo-depth = <16>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-asynchronous;
};
dma@c300 {
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 7f7e4a8..22e7195 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -85,7 +85,7 @@
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PCI is not set
CONFIG_USB_STORAGE=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PCF8563=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 6472322..185c292 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -141,7 +141,7 @@
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_STORAGE=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PS3=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index c9f212b..80bc5de 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -148,7 +148,6 @@
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
-CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BE2ISCSI=m
CONFIG_SCSI_IBMVSCSI=y
CONFIG_SCSI_IBMVFC=m
diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h
index fd3fd58..7b58917 100644
--- a/arch/powerpc/include/asm/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -38,13 +38,6 @@
#define memory_hotplug_max() memblock_end_of_DRAM()
#endif
-/*
- * Following are macros that each numa implmentation must define.
- */
-
-#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn)
-
#else
#define memory_hotplug_max() memblock_end_of_DRAM()
#endif /* CONFIG_NEED_MULTIPLE_NODES */
diff --git a/arch/powerpc/include/asm/rio.h b/arch/powerpc/include/asm/rio.h
index d902abd..b1d2dec 100644
--- a/arch/powerpc/include/asm/rio.h
+++ b/arch/powerpc/include/asm/rio.h
@@ -14,7 +14,7 @@
#define ASM_PPC_RIO_H
extern void platform_rio_init(void);
-#ifdef CONFIG_RAPIDIO
+#ifdef CONFIG_FSL_RIO
extern int fsl_rio_mcheck_exception(struct pt_regs *);
#else
static inline int fsl_rio_mcheck_exception(struct pt_regs *regs) {return 0; }
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 34d2722..9fb9332 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1979,7 +1979,7 @@
.pvr_value = 0x80240000,
.cpu_name = "e5500",
.cpu_features = CPU_FTRS_E5500,
- .cpu_user_features = COMMON_USER_BOOKE,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
.mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
MMU_FTR_USE_TLBILX,
.icache_bsize = 64,
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index f2c906b..8c3112a 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -82,11 +82,29 @@
}
early_param("mem", early_parse_mem);
+/*
+ * overlaps_initrd - check for overlap with page aligned extension of
+ * initrd.
+ */
+static inline int overlaps_initrd(unsigned long start, unsigned long size)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (!initrd_start)
+ return 0;
+
+ return (start + size) > _ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
+ start <= _ALIGN_UP(initrd_end, PAGE_SIZE);
+#else
+ return 0;
+#endif
+}
+
/**
* move_device_tree - move tree to an unused area, if needed.
*
* The device tree may be allocated beyond our memory limit, or inside the
- * crash kernel region for kdump. If so, move it out of the way.
+ * crash kernel region for kdump, or within the page aligned range of initrd.
+ * If so, move it out of the way.
*/
static void __init move_device_tree(void)
{
@@ -99,7 +117,8 @@
size = be32_to_cpu(initial_boot_params->totalsize);
if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
- overlaps_crashkernel(start, size)) {
+ overlaps_crashkernel(start, size) ||
+ overlaps_initrd(start, size)) {
p = __va(memblock_alloc(size, PAGE_SIZE));
memcpy(p, initial_boot_params, size);
initial_boot_params = (struct boot_param_header *)p;
@@ -555,7 +574,9 @@
#ifdef CONFIG_BLK_DEV_INITRD
/* then reserve the initrd, if any */
if (initrd_start && (initrd_end > initrd_start))
- memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
+ memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
+ _ALIGN_UP(initrd_end, PAGE_SIZE) -
+ _ALIGN_DOWN(initrd_start, PAGE_SIZE));
#endif /* CONFIG_BLK_DEV_INITRD */
#ifdef CONFIG_PPC32
diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c
index 77578c0..c57c193 100644
--- a/arch/powerpc/kernel/rtas-rtc.c
+++ b/arch/powerpc/kernel/rtas-rtc.c
@@ -4,6 +4,7 @@
#include <linux/init.h>
#include <linux/rtc.h>
#include <linux/delay.h>
+#include <linux/ratelimit.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/time.h>
@@ -29,9 +30,10 @@
}
} while (wait_time && (get_tb() < max_wait_tb));
- if (error != 0 && printk_ratelimit()) {
- printk(KERN_WARNING "error: reading the clock failed (%d)\n",
- error);
+ if (error != 0) {
+ printk_ratelimited(KERN_WARNING
+ "error: reading the clock failed (%d)\n",
+ error);
return 0;
}
@@ -55,19 +57,21 @@
wait_time = rtas_busy_delay_time(error);
if (wait_time) {
- if (in_interrupt() && printk_ratelimit()) {
+ if (in_interrupt()) {
memset(rtc_tm, 0, sizeof(struct rtc_time));
- printk(KERN_WARNING "error: reading clock"
- " would delay interrupt\n");
+ printk_ratelimited(KERN_WARNING
+ "error: reading clock "
+ "would delay interrupt\n");
return; /* delay not allowed */
}
msleep(wait_time);
}
} while (wait_time && (get_tb() < max_wait_tb));
- if (error != 0 && printk_ratelimit()) {
- printk(KERN_WARNING "error: reading the clock failed (%d)\n",
- error);
+ if (error != 0) {
+ printk_ratelimited(KERN_WARNING
+ "error: reading the clock failed (%d)\n",
+ error);
return;
}
@@ -99,9 +103,10 @@
}
} while (wait_time && (get_tb() < max_wait_tb));
- if (error != 0 && printk_ratelimit())
- printk(KERN_WARNING "error: setting the clock failed (%d)\n",
- error);
+ if (error != 0)
+ printk_ratelimited(KERN_WARNING
+ "error: setting the clock failed (%d)\n",
+ error);
return 0;
}
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index b96a3a0..78b76dc 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -25,6 +25,7 @@
#include <linux/errno.h>
#include <linux/elf.h>
#include <linux/ptrace.h>
+#include <linux/ratelimit.h>
#ifdef CONFIG_PPC64
#include <linux/syscalls.h>
#include <linux/compat.h>
@@ -892,11 +893,12 @@
printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n",
regs, frame, newsp);
#endif
- if (show_unhandled_signals && printk_ratelimit())
- printk(KERN_INFO "%s[%d]: bad frame in handle_rt_signal32: "
- "%p nip %08lx lr %08lx\n",
- current->comm, current->pid,
- addr, regs->nip, regs->link);
+ if (show_unhandled_signals)
+ printk_ratelimited(KERN_INFO
+ "%s[%d]: bad frame in handle_rt_signal32: "
+ "%p nip %08lx lr %08lx\n",
+ current->comm, current->pid,
+ addr, regs->nip, regs->link);
force_sigsegv(sig, current);
return 0;
@@ -1058,11 +1060,12 @@
return 0;
bad:
- if (show_unhandled_signals && printk_ratelimit())
- printk(KERN_INFO "%s[%d]: bad frame in sys_rt_sigreturn: "
- "%p nip %08lx lr %08lx\n",
- current->comm, current->pid,
- rt_sf, regs->nip, regs->link);
+ if (show_unhandled_signals)
+ printk_ratelimited(KERN_INFO
+ "%s[%d]: bad frame in sys_rt_sigreturn: "
+ "%p nip %08lx lr %08lx\n",
+ current->comm, current->pid,
+ rt_sf, regs->nip, regs->link);
force_sig(SIGSEGV, current);
return 0;
@@ -1149,12 +1152,12 @@
* We kill the task with a SIGSEGV in this situation.
*/
if (do_setcontext(ctx, regs, 1)) {
- if (show_unhandled_signals && printk_ratelimit())
- printk(KERN_INFO "%s[%d]: bad frame in "
- "sys_debug_setcontext: %p nip %08lx "
- "lr %08lx\n",
- current->comm, current->pid,
- ctx, regs->nip, regs->link);
+ if (show_unhandled_signals)
+ printk_ratelimited(KERN_INFO "%s[%d]: bad frame in "
+ "sys_debug_setcontext: %p nip %08lx "
+ "lr %08lx\n",
+ current->comm, current->pid,
+ ctx, regs->nip, regs->link);
force_sig(SIGSEGV, current);
goto out;
@@ -1236,11 +1239,12 @@
printk("badframe in handle_signal, regs=%p frame=%p newsp=%lx\n",
regs, frame, newsp);
#endif
- if (show_unhandled_signals && printk_ratelimit())
- printk(KERN_INFO "%s[%d]: bad frame in handle_signal32: "
- "%p nip %08lx lr %08lx\n",
- current->comm, current->pid,
- frame, regs->nip, regs->link);
+ if (show_unhandled_signals)
+ printk_ratelimited(KERN_INFO
+ "%s[%d]: bad frame in handle_signal32: "
+ "%p nip %08lx lr %08lx\n",
+ current->comm, current->pid,
+ frame, regs->nip, regs->link);
force_sigsegv(sig, current);
return 0;
@@ -1288,11 +1292,12 @@
return 0;
badframe:
- if (show_unhandled_signals && printk_ratelimit())
- printk(KERN_INFO "%s[%d]: bad frame in sys_sigreturn: "
- "%p nip %08lx lr %08lx\n",
- current->comm, current->pid,
- addr, regs->nip, regs->link);
+ if (show_unhandled_signals)
+ printk_ratelimited(KERN_INFO
+ "%s[%d]: bad frame in sys_sigreturn: "
+ "%p nip %08lx lr %08lx\n",
+ current->comm, current->pid,
+ addr, regs->nip, regs->link);
force_sig(SIGSEGV, current);
return 0;
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index da989ff..e91c736 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -24,6 +24,7 @@
#include <linux/elf.h>
#include <linux/ptrace.h>
#include <linux/module.h>
+#include <linux/ratelimit.h>
#include <asm/sigcontext.h>
#include <asm/ucontext.h>
@@ -380,10 +381,10 @@
printk("badframe in sys_rt_sigreturn, regs=%p uc=%p &uc->uc_mcontext=%p\n",
regs, uc, &uc->uc_mcontext);
#endif
- if (show_unhandled_signals && printk_ratelimit())
- printk(regs->msr & MSR_64BIT ? fmt64 : fmt32,
- current->comm, current->pid, "rt_sigreturn",
- (long)uc, regs->nip, regs->link);
+ if (show_unhandled_signals)
+ printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32,
+ current->comm, current->pid, "rt_sigreturn",
+ (long)uc, regs->nip, regs->link);
force_sig(SIGSEGV, current);
return 0;
@@ -468,10 +469,10 @@
printk("badframe in setup_rt_frame, regs=%p frame=%p newsp=%lx\n",
regs, frame, newsp);
#endif
- if (show_unhandled_signals && printk_ratelimit())
- printk(regs->msr & MSR_64BIT ? fmt64 : fmt32,
- current->comm, current->pid, "setup_rt_frame",
- (long)frame, regs->nip, regs->link);
+ if (show_unhandled_signals)
+ printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32,
+ current->comm, current->pid, "setup_rt_frame",
+ (long)frame, regs->nip, regs->link);
force_sigsegv(signr, current);
return 0;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 0ff4ab9..1a01414 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -34,6 +34,7 @@
#include <linux/bug.h>
#include <linux/kdebug.h>
#include <linux/debugfs.h>
+#include <linux/ratelimit.h>
#include <asm/emulated_ops.h>
#include <asm/pgtable.h>
@@ -197,12 +198,11 @@
if (die("Exception in kernel mode", regs, signr))
return;
} else if (show_unhandled_signals &&
- unhandled_signal(current, signr) &&
- printk_ratelimit()) {
- printk(regs->msr & MSR_64BIT ? fmt64 : fmt32,
- current->comm, current->pid, signr,
- addr, regs->nip, regs->link, code);
- }
+ unhandled_signal(current, signr)) {
+ printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32,
+ current->comm, current->pid, signr,
+ addr, regs->nip, regs->link, code);
+ }
memset(&info, 0, sizeof(info));
info.si_signo = signr;
@@ -425,7 +425,7 @@
unsigned long reason = mcsr;
int recoverable = 1;
- if (reason & MCSR_BUS_RBERR) {
+ if (reason & MCSR_LD) {
recoverable = fsl_rio_mcheck_exception(regs);
if (recoverable == 1)
goto silent_out;
@@ -1342,9 +1342,8 @@
} else {
/* didn't recognize the instruction */
/* XXX quick hack for now: set the non-Java bit in the VSCR */
- if (printk_ratelimit())
- printk(KERN_ERR "Unrecognized altivec instruction "
- "in %s at %lx\n", current->comm, regs->nip);
+ printk_ratelimited(KERN_ERR "Unrecognized altivec instruction "
+ "in %s at %lx\n", current->comm, regs->nip);
current->thread.vscr.u[3] |= 0x10000;
}
}
@@ -1548,9 +1547,8 @@
void ppc_warn_emulated_print(const char *type)
{
- if (printk_ratelimit())
- pr_warning("%s used emulated %s instruction\n", current->comm,
- type);
+ pr_warn_ratelimited("%s used emulated %s instruction\n", current->comm,
+ type);
}
static int __init ppc_warn_emulated_init(void)
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 54f4fb9..ad35f66 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -31,6 +31,7 @@
#include <linux/kdebug.h>
#include <linux/perf_event.h>
#include <linux/magic.h>
+#include <linux/ratelimit.h>
#include <asm/firmware.h>
#include <asm/page.h>
@@ -346,11 +347,10 @@
return 0;
}
- if (is_exec && (error_code & DSISR_PROTFAULT)
- && printk_ratelimit())
- printk(KERN_CRIT "kernel tried to execute NX-protected"
- " page (%lx) - exploit attempt? (uid: %d)\n",
- address, current_uid());
+ if (is_exec && (error_code & DSISR_PROTFAULT))
+ printk_ratelimited(KERN_CRIT "kernel tried to execute NX-protected"
+ " page (%lx) - exploit attempt? (uid: %d)\n",
+ address, current_uid());
return SIGSEGV;
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index d65b591..5de0f25 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -223,21 +223,6 @@
#undef FREESEC
}
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
- if (start < end)
- printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
- for (; start < end; start += PAGE_SIZE) {
- ClearPageReserved(virt_to_page(start));
- init_page_count(virt_to_page(start));
- free_page(start);
- totalram_pages++;
- }
-}
-#endif
-
-
#ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */
void setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size)
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 6374b21..f6dbb4c 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -99,20 +99,6 @@
((unsigned long)__init_end - (unsigned long)__init_begin) >> 10);
}
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
- if (start < end)
- printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
- for (; start < end; start += PAGE_SIZE) {
- ClearPageReserved(virt_to_page(start));
- init_page_count(virt_to_page(start));
- free_page(start);
- totalram_pages++;
- }
-}
-#endif
-
static void pgd_ctor(void *addr)
{
memset(addr, 0, PGD_TABLE_SIZE);
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 57e545b..29d4dde 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -382,6 +382,25 @@
mem_init_done = 1;
}
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init free_initrd_mem(unsigned long start, unsigned long end)
+{
+ if (start >= end)
+ return;
+
+ start = _ALIGN_DOWN(start, PAGE_SIZE);
+ end = _ALIGN_UP(end, PAGE_SIZE);
+ pr_info("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+
+ for (; start < end; start += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(start));
+ init_page_count(virt_to_page(start));
+ free_page(start);
+ totalram_pages++;
+ }
+}
+#endif
+
/*
* This is called when a page has been modified by the kernel.
* It just marks the page as not i-cache clean. We do the i-cache
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 33867ec..9d6a8ef 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -12,6 +12,8 @@
#include <linux/of.h>
#include <linux/memblock.h>
#include <linux/vmalloc.h>
+#include <linux/memory.h>
+
#include <asm/firmware.h>
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
@@ -20,24 +22,25 @@
static unsigned long get_memblock_size(void)
{
struct device_node *np;
- unsigned int memblock_size = 0;
+ unsigned int memblock_size = MIN_MEMORY_BLOCK_SIZE;
+ struct resource r;
np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
if (np) {
- const unsigned long *size;
+ const __be64 *size;
size = of_get_property(np, "ibm,lmb-size", NULL);
- memblock_size = size ? *size : 0;
-
+ if (size)
+ memblock_size = be64_to_cpup(size);
of_node_put(np);
- } else {
+ } else if (machine_is(pseries)) {
+ /* This fallback really only applies to pseries */
unsigned int memzero_size = 0;
- const unsigned int *regs;
np = of_find_node_by_path("/memory@0");
if (np) {
- regs = of_get_property(np, "reg", NULL);
- memzero_size = regs ? regs[3] : 0;
+ if (!of_address_to_resource(np, 0, &r))
+ memzero_size = resource_size(&r);
of_node_put(np);
}
@@ -50,16 +53,21 @@
sprintf(buf, "/memory@%x", memzero_size);
np = of_find_node_by_path(buf);
if (np) {
- regs = of_get_property(np, "reg", NULL);
- memblock_size = regs ? regs[3] : 0;
+ if (!of_address_to_resource(np, 0, &r))
+ memblock_size = resource_size(&r);
of_node_put(np);
}
}
}
-
return memblock_size;
}
+/* WARNING: This is going to override the generic definition whenever
+ * pseries is built-in regardless of what platform is active at boot
+ * time. This is fine for now as this is the only "option" and it
+ * should work everywhere. If not, we'll have to turn this into a
+ * ppc_md. callback
+ */
unsigned long memory_block_size_bytes(void)
{
return get_memblock_size();
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index 0608b16..d917573 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -196,9 +196,6 @@
out_be32(&lbc->lteccr, LTECCR_CLEAR);
out_be32(&lbc->ltedr, LTEDR_ENABLE);
- /* Enable interrupts for any detected events */
- out_be32(&lbc->lteir, LTEIR_ENABLE);
-
/* Set the monitor timeout value to the maximum for erratum A001 */
if (of_device_is_compatible(node, "fsl,elbc"))
clrsetbits_be32(&lbc->lbcr, LBCR_BMT, LBCR_BMTPS);
@@ -322,6 +319,9 @@
goto err;
}
+ /* Enable interrupts for any detected events */
+ out_be32(&fsl_lbc_ctrl_dev->regs->lteir, LTEIR_ENABLE);
+
return 0;
err:
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 5b206a2..b3fd081 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -283,23 +283,24 @@
#ifdef CONFIG_E500
int fsl_rio_mcheck_exception(struct pt_regs *regs)
{
- const struct exception_table_entry *entry = NULL;
- unsigned long reason = mfspr(SPRN_MCSR);
+ const struct exception_table_entry *entry;
+ unsigned long reason;
- if (reason & MCSR_BUS_RBERR) {
- reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
- if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
- /* Check if we are prepared to handle this fault */
- entry = search_exception_tables(regs->nip);
- if (entry) {
- pr_debug("RIO: %s - MC Exception handled\n",
- __func__);
- out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
- 0);
- regs->msr |= MSR_RI;
- regs->nip = entry->fixup;
- return 1;
- }
+ if (!rio_regs_win)
+ return 0;
+
+ reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR));
+ if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) {
+ /* Check if we are prepared to handle this fault */
+ entry = search_exception_tables(regs->nip);
+ if (entry) {
+ pr_debug("RIO: %s - MC Exception handled\n",
+ __func__);
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR),
+ 0);
+ regs->msr |= MSR_RI;
+ regs->nip = entry->fixup;
+ return 1;
}
}
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 3a8de5b..58d7a53 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -29,6 +29,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/syscore_ops.h>
+#include <linux/ratelimit.h>
#include <asm/ptrace.h>
#include <asm/signal.h>
@@ -1648,9 +1649,8 @@
return NO_IRQ;
}
if (unlikely(mpic->protected && test_bit(src, mpic->protected))) {
- if (printk_ratelimit())
- printk(KERN_WARNING "%s: Got protected source %d !\n",
- mpic->name, (int)src);
+ printk_ratelimited(KERN_WARNING "%s: Got protected source %d !\n",
+ mpic->name, (int)src);
mpic_eoi(mpic);
return NO_IRQ;
}
@@ -1688,9 +1688,8 @@
return NO_IRQ;
}
if (unlikely(mpic->protected && test_bit(src, mpic->protected))) {
- if (printk_ratelimit())
- printk(KERN_WARNING "%s: Got protected source %d !\n",
- mpic->name, (int)src);
+ printk_ratelimited(KERN_WARNING "%s: Got protected source %d !\n",
+ mpic->name, (int)src);
return NO_IRQ;
}
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 9fab2aa..c03fef7 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -89,6 +89,7 @@
select HAVE_GET_USER_PAGES_FAST
select HAVE_ARCH_MUTEX_CPU_RELAX
select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
+ select HAVE_RCU_TABLE_FREE if SMP
select ARCH_INLINE_SPIN_TRYLOCK
select ARCH_INLINE_SPIN_TRYLOCK_BH
select ARCH_INLINE_SPIN_LOCK
@@ -578,6 +579,7 @@
def_bool y
prompt "s390 guest support for KVM (EXPERIMENTAL)"
depends on 64BIT && EXPERIMENTAL
+ select VIRTUALIZATION
select VIRTIO
select VIRTIO_RING
select VIRTIO_CONSOLE
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index f6314af..38e71eb 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -17,15 +17,15 @@
#include <linux/gfp.h>
#include <linux/mm.h>
-#define check_pgt_cache() do {} while (0)
-
unsigned long *crst_table_alloc(struct mm_struct *);
void crst_table_free(struct mm_struct *, unsigned long *);
-void crst_table_free_rcu(struct mm_struct *, unsigned long *);
unsigned long *page_table_alloc(struct mm_struct *);
void page_table_free(struct mm_struct *, unsigned long *);
-void page_table_free_rcu(struct mm_struct *, unsigned long *);
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+void page_table_free_rcu(struct mmu_gather *, unsigned long *);
+void __tlb_remove_table(void *_table);
+#endif
static inline void clear_table(unsigned long *s, unsigned long val, size_t n)
{
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index e4efacf..801fbe1 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -293,19 +293,6 @@
* swap pte is 1011 and 0001, 0011, 0101, 0111 are invalid.
*/
-/* Page status table bits for virtualization */
-#define RCP_ACC_BITS 0xf000000000000000UL
-#define RCP_FP_BIT 0x0800000000000000UL
-#define RCP_PCL_BIT 0x0080000000000000UL
-#define RCP_HR_BIT 0x0040000000000000UL
-#define RCP_HC_BIT 0x0020000000000000UL
-#define RCP_GR_BIT 0x0004000000000000UL
-#define RCP_GC_BIT 0x0002000000000000UL
-
-/* User dirty / referenced bit for KVM's migration feature */
-#define KVM_UR_BIT 0x0000800000000000UL
-#define KVM_UC_BIT 0x0000400000000000UL
-
#ifndef __s390x__
/* Bits in the segment table address-space-control-element */
@@ -325,6 +312,19 @@
#define _SEGMENT_ENTRY (_SEGMENT_ENTRY_PTL)
#define _SEGMENT_ENTRY_EMPTY (_SEGMENT_ENTRY_INV)
+/* Page status table bits for virtualization */
+#define RCP_ACC_BITS 0xf0000000UL
+#define RCP_FP_BIT 0x08000000UL
+#define RCP_PCL_BIT 0x00800000UL
+#define RCP_HR_BIT 0x00400000UL
+#define RCP_HC_BIT 0x00200000UL
+#define RCP_GR_BIT 0x00040000UL
+#define RCP_GC_BIT 0x00020000UL
+
+/* User dirty / referenced bit for KVM's migration feature */
+#define KVM_UR_BIT 0x00008000UL
+#define KVM_UC_BIT 0x00004000UL
+
#else /* __s390x__ */
/* Bits in the segment/region table address-space-control-element */
@@ -367,6 +367,19 @@
#define _SEGMENT_ENTRY_LARGE 0x400 /* STE-format control, large page */
#define _SEGMENT_ENTRY_CO 0x100 /* change-recording override */
+/* Page status table bits for virtualization */
+#define RCP_ACC_BITS 0xf000000000000000UL
+#define RCP_FP_BIT 0x0800000000000000UL
+#define RCP_PCL_BIT 0x0080000000000000UL
+#define RCP_HR_BIT 0x0040000000000000UL
+#define RCP_HC_BIT 0x0020000000000000UL
+#define RCP_GR_BIT 0x0004000000000000UL
+#define RCP_GC_BIT 0x0002000000000000UL
+
+/* User dirty / referenced bit for KVM's migration feature */
+#define KVM_UR_BIT 0x0000800000000000UL
+#define KVM_UC_BIT 0x0000400000000000UL
+
#endif /* __s390x__ */
/*
diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
index 350e7ee..15c9762 100644
--- a/arch/s390/include/asm/qdio.h
+++ b/arch/s390/include/asm/qdio.h
@@ -139,110 +139,47 @@
struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q];
} __attribute__ ((packed, aligned(2048)));
-/**
- * struct sbal_flags - storage block address list flags
- * @last: last entry
- * @cont: contiguous storage
- * @frag: fragmentation
- */
-struct sbal_flags {
- u8 : 1;
- u8 last : 1;
- u8 cont : 1;
- u8 : 1;
- u8 frag : 2;
- u8 : 2;
-} __attribute__ ((packed));
+#define SBAL_EFLAGS_LAST_ENTRY 0x40
+#define SBAL_EFLAGS_CONTIGUOUS 0x20
+#define SBAL_EFLAGS_FIRST_FRAG 0x04
+#define SBAL_EFLAGS_MIDDLE_FRAG 0x08
+#define SBAL_EFLAGS_LAST_FRAG 0x0c
+#define SBAL_EFLAGS_MASK 0x6f
-#define SBAL_FLAGS_FIRST_FRAG 0x04000000UL
-#define SBAL_FLAGS_MIDDLE_FRAG 0x08000000UL
-#define SBAL_FLAGS_LAST_FRAG 0x0c000000UL
-#define SBAL_FLAGS_LAST_ENTRY 0x40000000UL
-#define SBAL_FLAGS_CONTIGUOUS 0x20000000UL
-
-#define SBAL_FLAGS0_DATA_CONTINUATION 0x20UL
+#define SBAL_SFLAGS0_PCI_REQ 0x40
+#define SBAL_SFLAGS0_DATA_CONTINUATION 0x20
/* Awesome OpenFCP extensions */
-#define SBAL_FLAGS0_TYPE_STATUS 0x00UL
-#define SBAL_FLAGS0_TYPE_WRITE 0x08UL
-#define SBAL_FLAGS0_TYPE_READ 0x10UL
-#define SBAL_FLAGS0_TYPE_WRITE_READ 0x18UL
-#define SBAL_FLAGS0_MORE_SBALS 0x04UL
-#define SBAL_FLAGS0_COMMAND 0x02UL
-#define SBAL_FLAGS0_LAST_SBAL 0x00UL
-#define SBAL_FLAGS0_ONLY_SBAL SBAL_FLAGS0_COMMAND
-#define SBAL_FLAGS0_MIDDLE_SBAL SBAL_FLAGS0_MORE_SBALS
-#define SBAL_FLAGS0_FIRST_SBAL SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND
-#define SBAL_FLAGS0_PCI 0x40
-
-/**
- * struct sbal_sbalf_0 - sbal flags for sbale 0
- * @pci: PCI indicator
- * @cont: data continuation
- * @sbtype: storage-block type (FCP)
- */
-struct sbal_sbalf_0 {
- u8 : 1;
- u8 pci : 1;
- u8 cont : 1;
- u8 sbtype : 2;
- u8 : 3;
-} __attribute__ ((packed));
-
-/**
- * struct sbal_sbalf_1 - sbal flags for sbale 1
- * @key: storage key
- */
-struct sbal_sbalf_1 {
- u8 : 4;
- u8 key : 4;
-} __attribute__ ((packed));
-
-/**
- * struct sbal_sbalf_14 - sbal flags for sbale 14
- * @erridx: error index
- */
-struct sbal_sbalf_14 {
- u8 : 4;
- u8 erridx : 4;
-} __attribute__ ((packed));
-
-/**
- * struct sbal_sbalf_15 - sbal flags for sbale 15
- * @reason: reason for error state
- */
-struct sbal_sbalf_15 {
- u8 reason;
-} __attribute__ ((packed));
-
-/**
- * union sbal_sbalf - storage block address list flags
- * @i0: sbalf0
- * @i1: sbalf1
- * @i14: sbalf14
- * @i15: sblaf15
- * @value: raw value
- */
-union sbal_sbalf {
- struct sbal_sbalf_0 i0;
- struct sbal_sbalf_1 i1;
- struct sbal_sbalf_14 i14;
- struct sbal_sbalf_15 i15;
- u8 value;
-};
+#define SBAL_SFLAGS0_TYPE_STATUS 0x00
+#define SBAL_SFLAGS0_TYPE_WRITE 0x08
+#define SBAL_SFLAGS0_TYPE_READ 0x10
+#define SBAL_SFLAGS0_TYPE_WRITE_READ 0x18
+#define SBAL_SFLAGS0_MORE_SBALS 0x04
+#define SBAL_SFLAGS0_COMMAND 0x02
+#define SBAL_SFLAGS0_LAST_SBAL 0x00
+#define SBAL_SFLAGS0_ONLY_SBAL SBAL_SFLAGS0_COMMAND
+#define SBAL_SFLAGS0_MIDDLE_SBAL SBAL_SFLAGS0_MORE_SBALS
+#define SBAL_SFLAGS0_FIRST_SBAL (SBAL_SFLAGS0_MORE_SBALS | SBAL_SFLAGS0_COMMAND)
/**
* struct qdio_buffer_element - SBAL entry
- * @flags: flags
+ * @eflags: SBAL entry flags
+ * @scount: SBAL count
+ * @sflags: whole SBAL flags
* @length: length
* @addr: address
*/
struct qdio_buffer_element {
- u32 flags;
+ u8 eflags;
+ /* private: */
+ u8 res1;
+ /* public: */
+ u8 scount;
+ u8 sflags;
u32 length;
#ifdef CONFIG_32BIT
/* private: */
- void *reserved;
+ void *res2;
/* public: */
#endif
void *addr;
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index 77eee54..c687a2c 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -26,67 +26,60 @@
#include <linux/swap.h>
#include <asm/processor.h>
#include <asm/pgalloc.h>
-#include <asm/smp.h>
#include <asm/tlbflush.h>
struct mmu_gather {
struct mm_struct *mm;
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+ struct mmu_table_batch *batch;
+#endif
unsigned int fullmm;
- unsigned int nr_ptes;
- unsigned int nr_pxds;
- unsigned int max;
- void **array;
- void *local[8];
+ unsigned int need_flush;
};
-static inline void __tlb_alloc_page(struct mmu_gather *tlb)
-{
- unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0);
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+struct mmu_table_batch {
+ struct rcu_head rcu;
+ unsigned int nr;
+ void *tables[0];
+};
- if (addr) {
- tlb->array = (void *) addr;
- tlb->max = PAGE_SIZE / sizeof(void *);
- }
-}
+#define MAX_TABLE_BATCH \
+ ((PAGE_SIZE - sizeof(struct mmu_table_batch)) / sizeof(void *))
+
+extern void tlb_table_flush(struct mmu_gather *tlb);
+extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
+#endif
static inline void tlb_gather_mmu(struct mmu_gather *tlb,
struct mm_struct *mm,
unsigned int full_mm_flush)
{
tlb->mm = mm;
- tlb->max = ARRAY_SIZE(tlb->local);
- tlb->array = tlb->local;
tlb->fullmm = full_mm_flush;
+ tlb->need_flush = 0;
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+ tlb->batch = NULL;
+#endif
if (tlb->fullmm)
__tlb_flush_mm(mm);
- else
- __tlb_alloc_page(tlb);
- tlb->nr_ptes = 0;
- tlb->nr_pxds = tlb->max;
}
static inline void tlb_flush_mmu(struct mmu_gather *tlb)
{
- if (!tlb->fullmm && (tlb->nr_ptes > 0 || tlb->nr_pxds < tlb->max))
- __tlb_flush_mm(tlb->mm);
- while (tlb->nr_ptes > 0)
- page_table_free_rcu(tlb->mm, tlb->array[--tlb->nr_ptes]);
- while (tlb->nr_pxds < tlb->max)
- crst_table_free_rcu(tlb->mm, tlb->array[tlb->nr_pxds++]);
+ if (!tlb->need_flush)
+ return;
+ tlb->need_flush = 0;
+ __tlb_flush_mm(tlb->mm);
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+ tlb_table_flush(tlb);
+#endif
}
static inline void tlb_finish_mmu(struct mmu_gather *tlb,
unsigned long start, unsigned long end)
{
tlb_flush_mmu(tlb);
-
- rcu_table_freelist_finish();
-
- /* keep the page table cache within bounds */
- check_pgt_cache();
-
- if (tlb->array != tlb->local)
- free_pages((unsigned long) tlb->array, 0);
}
/*
@@ -112,12 +105,11 @@
static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
unsigned long address)
{
- if (!tlb->fullmm) {
- tlb->array[tlb->nr_ptes++] = pte;
- if (tlb->nr_ptes >= tlb->nr_pxds)
- tlb_flush_mmu(tlb);
- } else
- page_table_free(tlb->mm, (unsigned long *) pte);
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+ if (!tlb->fullmm)
+ return page_table_free_rcu(tlb, (unsigned long *) pte);
+#endif
+ page_table_free(tlb->mm, (unsigned long *) pte);
}
/*
@@ -133,12 +125,11 @@
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 31))
return;
- if (!tlb->fullmm) {
- tlb->array[--tlb->nr_pxds] = pmd;
- if (tlb->nr_ptes >= tlb->nr_pxds)
- tlb_flush_mmu(tlb);
- } else
- crst_table_free(tlb->mm, (unsigned long *) pmd);
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+ if (!tlb->fullmm)
+ return tlb_remove_table(tlb, pmd);
+#endif
+ crst_table_free(tlb->mm, (unsigned long *) pmd);
#endif
}
@@ -155,12 +146,11 @@
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 42))
return;
- if (!tlb->fullmm) {
- tlb->array[--tlb->nr_pxds] = pud;
- if (tlb->nr_ptes >= tlb->nr_pxds)
- tlb_flush_mmu(tlb);
- } else
- crst_table_free(tlb->mm, (unsigned long *) pud);
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
+ if (!tlb->fullmm)
+ return tlb_remove_table(tlb, pud);
+#endif
+ crst_table_free(tlb->mm, (unsigned long *) pud);
#endif
}
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 52420d2..1d55c95 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -262,7 +262,7 @@
memset(&parms.orvals, 0, sizeof(parms.orvals));
memset(&parms.andvals, 0xff, sizeof(parms.andvals));
- parms.orvals[cr] = 1 << bit;
+ parms.orvals[cr] = 1UL << bit;
on_each_cpu(smp_ctl_bit_callback, &parms, 1);
}
EXPORT_SYMBOL(smp_ctl_set_bit);
@@ -276,7 +276,7 @@
memset(&parms.orvals, 0, sizeof(parms.orvals));
memset(&parms.andvals, 0xff, sizeof(parms.andvals));
- parms.andvals[cr] = ~(1L << bit);
+ parms.andvals[cr] = ~(1UL << bit);
on_each_cpu(smp_ctl_bit_callback, &parms, 1);
}
EXPORT_SYMBOL(smp_ctl_clear_bit);
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 30ca85c..67345ae 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -731,6 +731,7 @@
}
memcpy(facilities, S390_lowcore.stfle_fac_list, 16);
facilities[0] &= 0xff00fff3f47c0000ULL;
+ facilities[1] &= 0x201c000000000000ULL;
return 0;
}
diff --git a/arch/s390/kvm/sie64a.S b/arch/s390/kvm/sie64a.S
index ab0e041..5faa1b1 100644
--- a/arch/s390/kvm/sie64a.S
+++ b/arch/s390/kvm/sie64a.S
@@ -93,4 +93,6 @@
.section __ex_table,"a"
.quad sie_inst,sie_err
+ .quad sie_exit,sie_err
+ .quad sie_reenter,sie_err
.previous
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index b09763f..37a23c22 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -24,94 +24,12 @@
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
-struct rcu_table_freelist {
- struct rcu_head rcu;
- struct mm_struct *mm;
- unsigned int pgt_index;
- unsigned int crst_index;
- unsigned long *table[0];
-};
-
-#define RCU_FREELIST_SIZE \
- ((PAGE_SIZE - sizeof(struct rcu_table_freelist)) \
- / sizeof(unsigned long))
-
-static DEFINE_PER_CPU(struct rcu_table_freelist *, rcu_table_freelist);
-
-static void __page_table_free(struct mm_struct *mm, unsigned long *table);
-
-static struct rcu_table_freelist *rcu_table_freelist_get(struct mm_struct *mm)
-{
- struct rcu_table_freelist **batchp = &__get_cpu_var(rcu_table_freelist);
- struct rcu_table_freelist *batch = *batchp;
-
- if (batch)
- return batch;
- batch = (struct rcu_table_freelist *) __get_free_page(GFP_ATOMIC);
- if (batch) {
- batch->mm = mm;
- batch->pgt_index = 0;
- batch->crst_index = RCU_FREELIST_SIZE;
- *batchp = batch;
- }
- return batch;
-}
-
-static void rcu_table_freelist_callback(struct rcu_head *head)
-{
- struct rcu_table_freelist *batch =
- container_of(head, struct rcu_table_freelist, rcu);
-
- while (batch->pgt_index > 0)
- __page_table_free(batch->mm, batch->table[--batch->pgt_index]);
- while (batch->crst_index < RCU_FREELIST_SIZE)
- crst_table_free(batch->mm, batch->table[batch->crst_index++]);
- free_page((unsigned long) batch);
-}
-
-void rcu_table_freelist_finish(void)
-{
- struct rcu_table_freelist **batchp = &get_cpu_var(rcu_table_freelist);
- struct rcu_table_freelist *batch = *batchp;
-
- if (!batch)
- goto out;
- call_rcu(&batch->rcu, rcu_table_freelist_callback);
- *batchp = NULL;
-out:
- put_cpu_var(rcu_table_freelist);
-}
-
-static void smp_sync(void *arg)
-{
-}
-
#ifndef CONFIG_64BIT
#define ALLOC_ORDER 1
-#define TABLES_PER_PAGE 4
-#define FRAG_MASK 15UL
-#define SECOND_HALVES 10UL
-
-void clear_table_pgstes(unsigned long *table)
-{
- clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE/4);
- memset(table + 256, 0, PAGE_SIZE/4);
- clear_table(table + 512, _PAGE_TYPE_EMPTY, PAGE_SIZE/4);
- memset(table + 768, 0, PAGE_SIZE/4);
-}
-
+#define FRAG_MASK 0x0f
#else
#define ALLOC_ORDER 2
-#define TABLES_PER_PAGE 2
-#define FRAG_MASK 3UL
-#define SECOND_HALVES 2UL
-
-void clear_table_pgstes(unsigned long *table)
-{
- clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE/2);
- memset(table + 256, 0, PAGE_SIZE/2);
-}
-
+#define FRAG_MASK 0x03
#endif
unsigned long VMALLOC_START = VMALLOC_END - VMALLOC_SIZE;
@@ -140,29 +58,6 @@
free_pages((unsigned long) table, ALLOC_ORDER);
}
-void crst_table_free_rcu(struct mm_struct *mm, unsigned long *table)
-{
- struct rcu_table_freelist *batch;
-
- preempt_disable();
- if (atomic_read(&mm->mm_users) < 2 &&
- cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) {
- crst_table_free(mm, table);
- goto out;
- }
- batch = rcu_table_freelist_get(mm);
- if (!batch) {
- smp_call_function(smp_sync, NULL, 1);
- crst_table_free(mm, table);
- goto out;
- }
- batch->table[--batch->crst_index] = table;
- if (batch->pgt_index >= batch->crst_index)
- rcu_table_freelist_finish();
-out:
- preempt_enable();
-}
-
#ifdef CONFIG_64BIT
int crst_table_upgrade(struct mm_struct *mm, unsigned long limit)
{
@@ -238,124 +133,175 @@
}
#endif
+static inline unsigned int atomic_xor_bits(atomic_t *v, unsigned int bits)
+{
+ unsigned int old, new;
+
+ do {
+ old = atomic_read(v);
+ new = old ^ bits;
+ } while (atomic_cmpxchg(v, old, new) != old);
+ return new;
+}
+
/*
* page table entry allocation/free routines.
*/
+#ifdef CONFIG_PGSTE
+static inline unsigned long *page_table_alloc_pgste(struct mm_struct *mm)
+{
+ struct page *page;
+ unsigned long *table;
+
+ page = alloc_page(GFP_KERNEL|__GFP_REPEAT);
+ if (!page)
+ return NULL;
+ pgtable_page_ctor(page);
+ atomic_set(&page->_mapcount, 3);
+ table = (unsigned long *) page_to_phys(page);
+ clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE/2);
+ clear_table(table + PTRS_PER_PTE, 0, PAGE_SIZE/2);
+ return table;
+}
+
+static inline void page_table_free_pgste(unsigned long *table)
+{
+ struct page *page;
+
+ page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
+ pgtable_page_ctor(page);
+ atomic_set(&page->_mapcount, -1);
+ __free_page(page);
+}
+#endif
+
unsigned long *page_table_alloc(struct mm_struct *mm)
{
struct page *page;
unsigned long *table;
- unsigned long bits;
+ unsigned int mask, bit;
- bits = (mm->context.has_pgste) ? 3UL : 1UL;
+#ifdef CONFIG_PGSTE
+ if (mm_has_pgste(mm))
+ return page_table_alloc_pgste(mm);
+#endif
+ /* Allocate fragments of a 4K page as 1K/2K page table */
spin_lock_bh(&mm->context.list_lock);
- page = NULL;
+ mask = FRAG_MASK;
if (!list_empty(&mm->context.pgtable_list)) {
page = list_first_entry(&mm->context.pgtable_list,
struct page, lru);
- if ((page->flags & FRAG_MASK) == ((1UL << TABLES_PER_PAGE) - 1))
- page = NULL;
+ table = (unsigned long *) page_to_phys(page);
+ mask = atomic_read(&page->_mapcount);
+ mask = mask | (mask >> 4);
}
- if (!page) {
+ if ((mask & FRAG_MASK) == FRAG_MASK) {
spin_unlock_bh(&mm->context.list_lock);
page = alloc_page(GFP_KERNEL|__GFP_REPEAT);
if (!page)
return NULL;
pgtable_page_ctor(page);
- page->flags &= ~FRAG_MASK;
+ atomic_set(&page->_mapcount, 1);
table = (unsigned long *) page_to_phys(page);
- if (mm->context.has_pgste)
- clear_table_pgstes(table);
- else
- clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
+ clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
spin_lock_bh(&mm->context.list_lock);
list_add(&page->lru, &mm->context.pgtable_list);
+ } else {
+ for (bit = 1; mask & bit; bit <<= 1)
+ table += PTRS_PER_PTE;
+ mask = atomic_xor_bits(&page->_mapcount, bit);
+ if ((mask & FRAG_MASK) == FRAG_MASK)
+ list_del(&page->lru);
}
- table = (unsigned long *) page_to_phys(page);
- while (page->flags & bits) {
- table += 256;
- bits <<= 1;
- }
- page->flags |= bits;
- if ((page->flags & FRAG_MASK) == ((1UL << TABLES_PER_PAGE) - 1))
- list_move_tail(&page->lru, &mm->context.pgtable_list);
spin_unlock_bh(&mm->context.list_lock);
return table;
}
-static void __page_table_free(struct mm_struct *mm, unsigned long *table)
-{
- struct page *page;
- unsigned long bits;
-
- bits = ((unsigned long) table) & 15;
- table = (unsigned long *)(((unsigned long) table) ^ bits);
- page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
- page->flags ^= bits;
- if (!(page->flags & FRAG_MASK)) {
- pgtable_page_dtor(page);
- __free_page(page);
- }
-}
-
void page_table_free(struct mm_struct *mm, unsigned long *table)
{
struct page *page;
- unsigned long bits;
+ unsigned int bit, mask;
- bits = (mm->context.has_pgste) ? 3UL : 1UL;
- bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long);
+#ifdef CONFIG_PGSTE
+ if (mm_has_pgste(mm))
+ return page_table_free_pgste(table);
+#endif
+ /* Free 1K/2K page table fragment of a 4K page */
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
+ bit = 1 << ((__pa(table) & ~PAGE_MASK)/(PTRS_PER_PTE*sizeof(pte_t)));
spin_lock_bh(&mm->context.list_lock);
- page->flags ^= bits;
- if (page->flags & FRAG_MASK) {
- /* Page now has some free pgtable fragments. */
- if (!list_empty(&page->lru))
- list_move(&page->lru, &mm->context.pgtable_list);
- page = NULL;
- } else
- /* All fragments of the 4K page have been freed. */
+ if ((atomic_read(&page->_mapcount) & FRAG_MASK) != FRAG_MASK)
list_del(&page->lru);
+ mask = atomic_xor_bits(&page->_mapcount, bit);
+ if (mask & FRAG_MASK)
+ list_add(&page->lru, &mm->context.pgtable_list);
spin_unlock_bh(&mm->context.list_lock);
- if (page) {
+ if (mask == 0) {
pgtable_page_dtor(page);
+ atomic_set(&page->_mapcount, -1);
__free_page(page);
}
}
-void page_table_free_rcu(struct mm_struct *mm, unsigned long *table)
-{
- struct rcu_table_freelist *batch;
- struct page *page;
- unsigned long bits;
+#ifdef CONFIG_HAVE_RCU_TABLE_FREE
- preempt_disable();
- if (atomic_read(&mm->mm_users) < 2 &&
- cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) {
- page_table_free(mm, table);
- goto out;
+static void __page_table_free_rcu(void *table, unsigned bit)
+{
+ struct page *page;
+
+#ifdef CONFIG_PGSTE
+ if (bit == FRAG_MASK)
+ return page_table_free_pgste(table);
+#endif
+ /* Free 1K/2K page table fragment of a 4K page */
+ page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
+ if (atomic_xor_bits(&page->_mapcount, bit) == 0) {
+ pgtable_page_dtor(page);
+ atomic_set(&page->_mapcount, -1);
+ __free_page(page);
}
- batch = rcu_table_freelist_get(mm);
- if (!batch) {
- smp_call_function(smp_sync, NULL, 1);
- page_table_free(mm, table);
- goto out;
+}
+
+void page_table_free_rcu(struct mmu_gather *tlb, unsigned long *table)
+{
+ struct mm_struct *mm;
+ struct page *page;
+ unsigned int bit, mask;
+
+ mm = tlb->mm;
+#ifdef CONFIG_PGSTE
+ if (mm_has_pgste(mm)) {
+ table = (unsigned long *) (__pa(table) | FRAG_MASK);
+ tlb_remove_table(tlb, table);
+ return;
}
- bits = (mm->context.has_pgste) ? 3UL : 1UL;
- bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long);
+#endif
+ bit = 1 << ((__pa(table) & ~PAGE_MASK) / (PTRS_PER_PTE*sizeof(pte_t)));
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
spin_lock_bh(&mm->context.list_lock);
- /* Delayed freeing with rcu prevents reuse of pgtable fragments */
- list_del_init(&page->lru);
+ if ((atomic_read(&page->_mapcount) & FRAG_MASK) != FRAG_MASK)
+ list_del(&page->lru);
+ mask = atomic_xor_bits(&page->_mapcount, bit | (bit << 4));
+ if (mask & FRAG_MASK)
+ list_add_tail(&page->lru, &mm->context.pgtable_list);
spin_unlock_bh(&mm->context.list_lock);
- table = (unsigned long *)(((unsigned long) table) | bits);
- batch->table[batch->pgt_index++] = table;
- if (batch->pgt_index >= batch->crst_index)
- rcu_table_freelist_finish();
-out:
- preempt_enable();
+ table = (unsigned long *) (__pa(table) | (bit << 4));
+ tlb_remove_table(tlb, table);
}
+void __tlb_remove_table(void *_table)
+{
+ void *table = (void *)((unsigned long) _table & PAGE_MASK);
+ unsigned type = (unsigned long) _table & ~PAGE_MASK;
+
+ if (type)
+ __page_table_free_rcu(table, type);
+ else
+ free_pages((unsigned long) table, ALLOC_ORDER);
+}
+
+#endif
+
/*
* switch on pgstes for its userspace process (for kvm)
*/
@@ -369,7 +315,7 @@
return -EINVAL;
/* Do we have pgstes? if yes, we are done */
- if (tsk->mm->context.has_pgste)
+ if (mm_has_pgste(tsk->mm))
return 0;
/* lets check if we are allowed to replace the mm */
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index 5995e9b..0e358c2 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -25,7 +25,7 @@
#include "hwsampler.h"
-#define DEFAULT_INTERVAL 4096
+#define DEFAULT_INTERVAL 4127518
#define DEFAULT_SDBT_BLOCKS 1
#define DEFAULT_SDB_BLOCKS 511
@@ -151,6 +151,12 @@
if (oprofile_max_interval == 0)
return -ENODEV;
+ /* The initial value should be sane */
+ if (oprofile_hw_interval < oprofile_min_interval)
+ oprofile_hw_interval = oprofile_min_interval;
+ if (oprofile_hw_interval > oprofile_max_interval)
+ oprofile_hw_interval = oprofile_max_interval;
+
if (oprofile_timer_init(ops))
return -ENODEV;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index f03338c..bbdeb48 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -348,6 +348,7 @@
select SYS_SUPPORTS_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select USB_ARCH_HAS_OHCI
+ select USB_OHCI_SH if USB_OHCI_HCD
help
Select SH7720 if you have a SH3-DSP SH7720 CPU.
@@ -357,6 +358,7 @@
select CPU_HAS_DSP
select SYS_SUPPORTS_CMT
select USB_ARCH_HAS_OHCI
+ select USB_OHCI_SH if USB_OHCI_HCD
help
Select SH7721 if you have a SH3-DSP SH7721 CPU.
@@ -440,6 +442,7 @@
bool "Support SH7763 processor"
select CPU_SH4A
select USB_ARCH_HAS_OHCI
+ select USB_OHCI_SH if USB_OHCI_HCD
help
Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
@@ -467,7 +470,9 @@
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select ARCH_WANT_OPTIONAL_GPIOLIB
select USB_ARCH_HAS_OHCI
+ select USB_OHCI_SH if USB_OHCI_HCD
select USB_ARCH_HAS_EHCI
+ select USB_EHCI_SH if USB_EHCI_HCD
config CPU_SUBTYPE_SHX3
bool "Support SH-X3 processor"
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 3a32741..513cb1a 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -20,6 +20,7 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/r8a66597.h>
+#include <linux/usb/renesas_usbhs.h>
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#include <linux/spi/spi.h>
@@ -232,6 +233,52 @@
.resource = usb1_common_resources,
};
+/*
+ * USBHS
+ */
+static int usbhs_get_id(struct platform_device *pdev)
+{
+ return gpio_get_value(GPIO_PTB3);
+}
+
+static struct renesas_usbhs_platform_info usbhs_info = {
+ .platform_callback = {
+ .get_id = usbhs_get_id,
+ },
+ .driver_param = {
+ .buswait_bwait = 4,
+ .detection_delay = 5,
+ },
+};
+
+static struct resource usbhs_resources[] = {
+ [0] = {
+ .start = 0xa4d90000,
+ .end = 0xa4d90124 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 66,
+ .end = 66,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbhs_device = {
+ .name = "renesas_usbhs",
+ .id = 1,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbhs_info,
+ },
+ .num_resources = ARRAY_SIZE(usbhs_resources),
+ .resource = usbhs_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_USB1,
+ },
+};
+
/* LCDC */
const static struct fb_videomode ecovec_lcd_modes[] = {
{
@@ -897,6 +944,7 @@
&sh_eth_device,
&usb0_host_device,
&usb1_common_device,
+ &usbhs_device,
&lcdc_device,
&ceu0_device,
&ceu1_device,
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index 780e083..23bc849 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -27,8 +27,6 @@
$(CONFIG_BOOT_LINK_OFFSET)]')
endif
-LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
ifeq ($(CONFIG_MCOUNT),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
@@ -37,7 +35,25 @@
LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
-T $(obj)/../../kernel/vmlinux.lds
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
+#
+# Pull in the necessary libgcc bits from the in-kernel implementation.
+#
+lib1funcs-$(CONFIG_SUPERH32) := ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S \
+ lshrsi3.S
+lib1funcs-obj := \
+ $(addsuffix .o, $(basename $(addprefix $(obj)/, $(lib1funcs-y))))
+
+lib1funcs-dir := $(srctree)/arch/$(SRCARCH)/lib
+ifeq ($(BITS),64)
+ lib1funcs-dir := $(addsuffix $(BITS), $(lib1funcs-dir))
+endif
+
+KBUILD_CFLAGS += -I$(lib1funcs-dir)
+
+$(addprefix $(obj)/,$(lib1funcs-y)): $(obj)/%: $(lib1funcs-dir)/% FORCE
+ $(call cmd,shipped)
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(lib1funcs-obj) FORCE
$(call if_changed,ld)
@:
diff --git a/arch/sh/configs/sh7757lcr_defconfig b/arch/sh/configs/sh7757lcr_defconfig
index 33ddb13..cfde98d 100644
--- a/arch/sh/configs/sh7757lcr_defconfig
+++ b/arch/sh/configs/sh7757lcr_defconfig
@@ -9,7 +9,6 @@
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS_ALL=y
CONFIG_SLAB=y
@@ -39,8 +38,6 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
@@ -56,18 +53,19 @@
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_MOUSE_PS2 is not set
# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=3
CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
CONFIG_SPI_SH=y
# CONFIG_HWMON is not set
-CONFIG_MFD_SH_MOBILE_SDHI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SH=y
CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_SH=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHI=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index 0f55891..e2cbd92 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -227,7 +227,7 @@
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_PL2303=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_SH=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
index 4676bf5..f848dec 100644
--- a/arch/sh/include/asm/cmpxchg-grb.h
+++ b/arch/sh/include/asm/cmpxchg-grb.h
@@ -15,8 +15,9 @@
" mov.l %2, @%1 \n\t" /* store new value */
"1: mov r1, r15 \n\t" /* LOGOUT */
: "=&r" (retval),
- "+r" (m)
- : "r" (val)
+ "+r" (m),
+ "+r" (val) /* inhibit r15 overloading */
+ :
: "memory", "r0", "r1");
return retval;
@@ -36,8 +37,9 @@
" mov.b %2, @%1 \n\t" /* store new value */
"1: mov r1, r15 \n\t" /* LOGOUT */
: "=&r" (retval),
- "+r" (m)
- : "r" (val)
+ "+r" (m),
+ "+r" (val) /* inhibit r15 overloading */
+ :
: "memory" , "r0", "r1");
return retval;
@@ -54,13 +56,14 @@
" nop \n\t"
" mov r15, r1 \n\t" /* r1 = saved sp */
" mov #-8, r15 \n\t" /* LOGIN */
- " mov.l @%1, %0 \n\t" /* load old value */
- " cmp/eq %0, %2 \n\t"
+ " mov.l @%3, %0 \n\t" /* load old value */
+ " cmp/eq %0, %1 \n\t"
" bf 1f \n\t" /* if not equal */
- " mov.l %3, @%1 \n\t" /* store new value */
+ " mov.l %2, @%3 \n\t" /* store new value */
"1: mov r1, r15 \n\t" /* LOGOUT */
- : "=&r" (retval)
- : "r" (m), "r" (old), "r" (new)
+ : "=&r" (retval),
+ "+r" (old), "+r" (new) /* old or new can be r15 */
+ : "r" (m)
: "memory" , "r0", "r1", "t");
return retval;
diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h
index 8887baf..15a8496 100644
--- a/arch/sh/include/asm/mmzone.h
+++ b/arch/sh/include/asm/mmzone.h
@@ -9,10 +9,6 @@
extern struct pglist_data *node_data[];
#define NODE_DATA(nid) (node_data[nid])
-#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \
- NODE_DATA(nid)->node_spanned_pages)
-
static inline int pfn_to_nid(unsigned long pfn)
{
int nid;
diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h
index 2a541dd..e25c4c7 100644
--- a/arch/sh/include/asm/processor_64.h
+++ b/arch/sh/include/asm/processor_64.h
@@ -150,7 +150,6 @@
#define SR_USER (SR_MMU | SR_FD)
#define start_thread(_regs, new_pc, new_sp) \
- set_fs(USER_DS); \
_regs->sr = SR_USER; /* User mode. */ \
_regs->pc = new_pc - 4; /* Compensate syscall exit */ \
_regs->pc |= 1; /* Set SHmedia ! */ \
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
index 3daef8e..cbc47e6 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -298,6 +298,14 @@
SHDMA_SLAVE_SCIF4_RX,
SHDMA_SLAVE_SCIF5_TX,
SHDMA_SLAVE_SCIF5_RX,
+ SHDMA_SLAVE_USB0D0_TX,
+ SHDMA_SLAVE_USB0D0_RX,
+ SHDMA_SLAVE_USB0D1_TX,
+ SHDMA_SLAVE_USB0D1_RX,
+ SHDMA_SLAVE_USB1D0_TX,
+ SHDMA_SLAVE_USB1D0_RX,
+ SHDMA_SLAVE_USB1D1_TX,
+ SHDMA_SLAVE_USB1D1_RX,
SHDMA_SLAVE_SDHI0_TX,
SHDMA_SLAVE_SDHI0_RX,
SHDMA_SLAVE_SDHI1_TX,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index 0333fe9..134a397 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -93,6 +93,46 @@
.chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x36,
}, {
+ .slave_id = SHDMA_SLAVE_USB0D0_TX,
+ .addr = 0xA4D80100,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0x73,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0D0_RX,
+ .addr = 0xA4D80100,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0x73,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0D1_TX,
+ .addr = 0xA4D80120,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0x77,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB0D1_RX,
+ .addr = 0xA4D80120,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0x77,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1D0_TX,
+ .addr = 0xA4D90100,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0xab,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1D0_RX,
+ .addr = 0xA4D90100,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0xab,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1D1_TX,
+ .addr = 0xA4D90120,
+ .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0xaf,
+ }, {
+ .slave_id = SHDMA_SLAVE_USB1D1_RX,
+ .addr = 0xA4D90120,
+ .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+ .mid_rid = 0xaf,
+ }, {
.slave_id = SHDMA_SLAVE_SDHI0_TX,
.addr = 0x04ce0030,
.chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index 423dabf..e915dea 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -183,7 +183,7 @@
{
.slave_id = SHDMA_SLAVE_SCIF2_RX,
.addr = 0x1f4b0014,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x22,
},
@@ -197,7 +197,7 @@
{
.slave_id = SHDMA_SLAVE_SCIF3_RX,
.addr = 0x1f4c0014,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2a,
},
@@ -211,7 +211,7 @@
{
.slave_id = SHDMA_SLAVE_SCIF4_RX,
.addr = 0x1f4d0014,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x42,
},
@@ -228,7 +228,7 @@
{
.slave_id = SHDMA_SLAVE_RIIC0_RX,
.addr = 0x1e500013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x22,
},
@@ -242,7 +242,7 @@
{
.slave_id = SHDMA_SLAVE_RIIC1_RX,
.addr = 0x1e510013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2a,
},
@@ -256,7 +256,7 @@
{
.slave_id = SHDMA_SLAVE_RIIC2_RX,
.addr = 0x1e520013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0xa2,
},
@@ -265,12 +265,12 @@
.addr = 0x1e530012,
.chcr = SM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xab,
+ .mid_rid = 0xa9,
},
{
.slave_id = SHDMA_SLAVE_RIIC3_RX,
.addr = 0x1e530013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0xaf,
},
@@ -279,14 +279,14 @@
.addr = 0x1e540012,
.chcr = SM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xc1,
+ .mid_rid = 0xc5,
},
{
.slave_id = SHDMA_SLAVE_RIIC4_RX,
.addr = 0x1e540013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
- .mid_rid = 0xc2,
+ .mid_rid = 0xc6,
},
};
@@ -301,7 +301,7 @@
{
.slave_id = SHDMA_SLAVE_RIIC5_RX,
.addr = 0x1e550013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x22,
},
@@ -315,7 +315,7 @@
{
.slave_id = SHDMA_SLAVE_RIIC6_RX,
.addr = 0x1e560013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x2a,
},
@@ -329,7 +329,7 @@
{
.slave_id = SHDMA_SLAVE_RIIC7_RX,
.addr = 0x1e570013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x42,
},
@@ -343,7 +343,7 @@
{
.slave_id = SHDMA_SLAVE_RIIC8_RX,
.addr = 0x1e580013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x46,
},
@@ -357,7 +357,7 @@
{
.slave_id = SHDMA_SLAVE_RIIC9_RX,
.addr = 0x1e590013,
- .chcr = SM_INC | 0x800 | 0x40000000 |
+ .chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x52,
},
@@ -659,6 +659,54 @@
.resource = spi0_resources,
};
+static struct resource usb_ehci_resources[] = {
+ [0] = {
+ .start = 0xfe4f1000,
+ .end = 0xfe4f10ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 57,
+ .end = 57,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb_ehci_device = {
+ .name = "sh_ehci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &usb_ehci_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(usb_ehci_resources),
+ .resource = usb_ehci_resources,
+};
+
+static struct resource usb_ohci_resources[] = {
+ [0] = {
+ .start = 0xfe4f1800,
+ .end = 0xfe4f18ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 57,
+ .end = 57,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usb_ohci_device = {
+ .name = "sh_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &usb_ohci_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(usb_ohci_resources),
+ .resource = usb_ohci_resources,
+};
+
static struct platform_device *sh7757_devices[] __initdata = {
&scif2_device,
&scif3_device,
@@ -670,6 +718,8 @@
&dma2_device,
&dma3_device,
&spi0_device,
+ &usb_ehci_device,
+ &usb_ohci_device,
};
static int __init sh7757_devices_setup(void)
@@ -1039,13 +1089,13 @@
/* Support for external interrupt pins in IRQ mode */
static struct intc_vect vectors_irq0123[] __initdata = {
- INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
- INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+ INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240),
+ INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0),
};
static struct intc_vect vectors_irq4567[] __initdata = {
- INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
- INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200),
+ INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340),
+ INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0),
};
static struct intc_sense_reg sense_registers[] __initdata = {
@@ -1079,14 +1129,14 @@
};
static struct intc_vect vectors_irl4567[] __initdata = {
- INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20),
- INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60),
- INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0),
- INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0),
- INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20),
- INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60),
- INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0),
- INTC_VECT(IRL4_HHHL, 0xcc0),
+ INTC_VECT(IRL4_LLLL, 0x200), INTC_VECT(IRL4_LLLH, 0x220),
+ INTC_VECT(IRL4_LLHL, 0x240), INTC_VECT(IRL4_LLHH, 0x260),
+ INTC_VECT(IRL4_LHLL, 0x280), INTC_VECT(IRL4_LHLH, 0x2a0),
+ INTC_VECT(IRL4_LHHL, 0x2c0), INTC_VECT(IRL4_LHHH, 0x2e0),
+ INTC_VECT(IRL4_HLLL, 0x300), INTC_VECT(IRL4_HLLH, 0x320),
+ INTC_VECT(IRL4_HLHL, 0x340), INTC_VECT(IRL4_HLHH, 0x360),
+ INTC_VECT(IRL4_HHLL, 0x380), INTC_VECT(IRL4_HHLH, 0x3a0),
+ INTC_VECT(IRL4_HHHL, 0x3c0),
};
static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7757-irl0123", vectors_irl0123,
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 9197110..a3ee919 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -13,6 +13,7 @@
#include <linux/seq_file.h>
#include <linux/ftrace.h>
#include <linux/delay.h>
+#include <linux/ratelimit.h>
#include <asm/processor.h>
#include <asm/machvec.h>
#include <asm/uaccess.h>
@@ -268,9 +269,8 @@
unsigned int newcpu = cpumask_any_and(data->affinity,
cpu_online_mask);
if (newcpu >= nr_cpu_ids) {
- if (printk_ratelimit())
- printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n",
- irq, cpu);
+ pr_info_ratelimited("IRQ%u no longer affine to CPU%u\n",
+ irq, cpu);
cpumask_setall(data->affinity);
newcpu = cpumask_any_and(data->affinity,
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index b473f0c..aaf6d59 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -102,8 +102,6 @@
void start_thread(struct pt_regs *regs, unsigned long new_pc,
unsigned long new_sp)
{
- set_fs(USER_DS);
-
regs->pr = 0;
regs->sr = SR_FD;
regs->pc = new_pc;
diff --git a/arch/sh/mm/alignment.c b/arch/sh/mm/alignment.c
index b2595b8..620fa7f 100644
--- a/arch/sh/mm/alignment.c
+++ b/arch/sh/mm/alignment.c
@@ -13,6 +13,7 @@
#include <linux/seq_file.h>
#include <linux/proc_fs.h>
#include <linux/uaccess.h>
+#include <linux/ratelimit.h>
#include <asm/alignment.h>
#include <asm/processor.h>
@@ -95,13 +96,13 @@
void unaligned_fixups_notify(struct task_struct *tsk, insn_size_t insn,
struct pt_regs *regs)
{
- if (user_mode(regs) && (se_usermode & UM_WARN) && printk_ratelimit())
- pr_notice("Fixing up unaligned userspace access "
+ if (user_mode(regs) && (se_usermode & UM_WARN))
+ pr_notice_ratelimited("Fixing up unaligned userspace access "
"in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
tsk->comm, task_pid_nr(tsk),
(void *)instruction_pointer(regs), insn);
- else if (se_kernmode_warn && printk_ratelimit())
- pr_notice("Fixing up unaligned kernel access "
+ else if (se_kernmode_warn)
+ pr_notice_ratelimited("Fixing up unaligned kernel access "
"in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
tsk->comm, task_pid_nr(tsk),
(void *)instruction_pointer(regs), insn);
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
index 5241146..1157251 100644
--- a/arch/sh/mm/cache-debugfs.c
+++ b/arch/sh/mm/cache-debugfs.c
@@ -26,9 +26,9 @@
{
unsigned int cache_type = (unsigned int)file->private;
struct cache_info *cache;
- unsigned int waysize, way, cache_size;
- unsigned long ccr, base;
- static unsigned long addrstart = 0;
+ unsigned int waysize, way;
+ unsigned long ccr;
+ unsigned long addrstart = 0;
/*
* Go uncached immediately so we don't skew the results any
@@ -45,28 +45,13 @@
}
if (cache_type == CACHE_TYPE_DCACHE) {
- base = CACHE_OC_ADDRESS_ARRAY;
+ addrstart = CACHE_OC_ADDRESS_ARRAY;
cache = ¤t_cpu_data.dcache;
} else {
- base = CACHE_IC_ADDRESS_ARRAY;
+ addrstart = CACHE_IC_ADDRESS_ARRAY;
cache = ¤t_cpu_data.icache;
}
- /*
- * Due to the amount of data written out (depending on the cache size),
- * we may be iterated over multiple times. In this case, keep track of
- * the entry position in addrstart, and rewind it when we've hit the
- * end of the cache.
- *
- * Likewise, the same code is used for multiple caches, so care must
- * be taken for bouncing addrstart back and forth so the appropriate
- * cache is hit.
- */
- cache_size = cache->ways * cache->sets * cache->linesz;
- if (((addrstart & 0xff000000) != base) ||
- (addrstart & 0x00ffffff) > cache_size)
- addrstart = base;
-
waysize = cache->sets;
/*
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index af32e17..253986b 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -26,7 +26,6 @@
select HAVE_DMA_API_DEBUG
select HAVE_ARCH_JUMP_LABEL
select HAVE_GENERIC_HARDIRQS
- select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
select USE_GENERIC_SMP_HELPERS if SMP
@@ -528,6 +527,23 @@
config PCI_SYSCALL
def_bool PCI
+config PCIC_PCI
+ bool
+ depends on PCI && SPARC32 && !SPARC_LEON
+ default y
+
+config LEON_PCI
+ bool
+ depends on PCI && SPARC_LEON
+ default y
+
+config GRPCI2
+ bool "GRPCI2 Host Bridge Support"
+ depends on LEON_PCI
+ default y
+ help
+ Say Y here to include the GRPCI2 Host Bridge Driver.
+
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
diff --git a/arch/sparc/include/asm/floppy_32.h b/arch/sparc/include/asm/floppy_32.h
index 482c79e..7440915 100644
--- a/arch/sparc/include/asm/floppy_32.h
+++ b/arch/sparc/include/asm/floppy_32.h
@@ -138,7 +138,7 @@
return sun_fdc->data_82072;
case 7: /* FD_DIR */
return sun_read_dir();
- };
+ }
panic("sun_82072_fd_inb: How did I get here?");
}
@@ -161,7 +161,7 @@
case 4: /* FD_STATUS */
sun_fdc->status_82072 = value;
break;
- };
+ }
return;
}
@@ -186,7 +186,7 @@
return sun_fdc->data_82077;
case 7: /* FD_DIR */
return sun_read_dir();
- };
+ }
panic("sun_82077_fd_inb: How did I get here?");
}
@@ -212,7 +212,7 @@
case 3: /* FD_TDR */
sun_fdc->tapectl_82077 = value;
break;
- };
+ }
return;
}
diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h
index 6597ce8..bcef1f5 100644
--- a/arch/sparc/include/asm/floppy_64.h
+++ b/arch/sparc/include/asm/floppy_64.h
@@ -111,7 +111,7 @@
case 7: /* FD_DIR */
/* XXX: Is DCL on 0x80 in sun4m? */
return sbus_readb(&sun_fdc->dir_82077);
- };
+ }
panic("sun_82072_fd_inb: How did I get here?");
}
@@ -135,7 +135,7 @@
case 4: /* FD_STATUS */
sbus_writeb(value, &sun_fdc->status_82077);
break;
- };
+ }
return;
}
diff --git a/arch/sparc/include/asm/irqflags_32.h b/arch/sparc/include/asm/irqflags_32.h
index d4d0711..1484890 100644
--- a/arch/sparc/include/asm/irqflags_32.h
+++ b/arch/sparc/include/asm/irqflags_32.h
@@ -18,7 +18,7 @@
extern unsigned long arch_local_irq_save(void);
extern void arch_local_irq_enable(void);
-static inline unsigned long arch_local_save_flags(void)
+static inline notrace unsigned long arch_local_save_flags(void)
{
unsigned long flags;
@@ -26,17 +26,17 @@
return flags;
}
-static inline void arch_local_irq_disable(void)
+static inline notrace void arch_local_irq_disable(void)
{
arch_local_irq_save();
}
-static inline bool arch_irqs_disabled_flags(unsigned long flags)
+static inline notrace bool arch_irqs_disabled_flags(unsigned long flags)
{
return (flags & PSR_PIL) != 0;
}
-static inline bool arch_irqs_disabled(void)
+static inline notrace bool arch_irqs_disabled(void)
{
return arch_irqs_disabled_flags(arch_local_save_flags());
}
diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h
index aab969c..23cd27f 100644
--- a/arch/sparc/include/asm/irqflags_64.h
+++ b/arch/sparc/include/asm/irqflags_64.h
@@ -14,7 +14,7 @@
#ifndef __ASSEMBLY__
-static inline unsigned long arch_local_save_flags(void)
+static inline notrace unsigned long arch_local_save_flags(void)
{
unsigned long flags;
@@ -26,7 +26,7 @@
return flags;
}
-static inline void arch_local_irq_restore(unsigned long flags)
+static inline notrace void arch_local_irq_restore(unsigned long flags)
{
__asm__ __volatile__(
"wrpr %0, %%pil"
@@ -36,7 +36,7 @@
);
}
-static inline void arch_local_irq_disable(void)
+static inline notrace void arch_local_irq_disable(void)
{
__asm__ __volatile__(
"wrpr %0, %%pil"
@@ -46,7 +46,7 @@
);
}
-static inline void arch_local_irq_enable(void)
+static inline notrace void arch_local_irq_enable(void)
{
__asm__ __volatile__(
"wrpr 0, %%pil"
@@ -56,17 +56,17 @@
);
}
-static inline int arch_irqs_disabled_flags(unsigned long flags)
+static inline notrace int arch_irqs_disabled_flags(unsigned long flags)
{
return (flags > 0);
}
-static inline int arch_irqs_disabled(void)
+static inline notrace int arch_irqs_disabled(void)
{
return arch_irqs_disabled_flags(arch_local_save_flags());
}
-static inline unsigned long arch_local_irq_save(void)
+static inline notrace unsigned long arch_local_irq_save(void)
{
unsigned long flags, tmp;
diff --git a/arch/sparc/include/asm/leon.h b/arch/sparc/include/asm/leon.h
index 6bdaf1e..a4e457f 100644
--- a/arch/sparc/include/asm/leon.h
+++ b/arch/sparc/include/asm/leon.h
@@ -318,6 +318,9 @@
extern unsigned int leon_build_device_irq(unsigned int real_irq,
irq_flow_handler_t flow_handler,
const char *name, int do_ack);
+extern void leon_update_virq_handling(unsigned int virq,
+ irq_flow_handler_t flow_handler,
+ const char *name, int do_ack);
extern void leon_clear_clock_irq(void);
extern void leon_load_profile_irq(int cpu, unsigned int limit);
extern void leon_init_timers(irq_handler_t counter_fn);
diff --git a/arch/sparc/include/asm/leon_pci.h b/arch/sparc/include/asm/leon_pci.h
new file mode 100644
index 0000000..42b4b31
--- /dev/null
+++ b/arch/sparc/include/asm/leon_pci.h
@@ -0,0 +1,21 @@
+/*
+ * asm/leon_pci.h
+ *
+ * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
+ */
+
+#ifndef _ASM_LEON_PCI_H_
+#define _ASM_LEON_PCI_H_
+
+/* PCI related definitions */
+struct leon_pci_info {
+ struct pci_ops *ops;
+ struct resource io_space;
+ struct resource mem_space;
+ int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
+};
+
+extern void leon_pci_init(struct platform_device *ofdev,
+ struct leon_pci_info *info);
+
+#endif /* _ASM_LEON_PCI_H_ */
diff --git a/arch/sparc/include/asm/mmzone.h b/arch/sparc/include/asm/mmzone.h
index e8c6487..99d9b9f 100644
--- a/arch/sparc/include/asm/mmzone.h
+++ b/arch/sparc/include/asm/mmzone.h
@@ -8,8 +8,6 @@
extern struct pglist_data *node_data[];
#define NODE_DATA(nid) (node_data[nid])
-#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn)
extern int numa_cpu_lookup_table[];
extern cpumask_t numa_cpumask_lookup_table[];
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
index 332ac9a..862e3ce 100644
--- a/arch/sparc/include/asm/pci_32.h
+++ b/arch/sparc/include/asm/pci_32.h
@@ -47,7 +47,31 @@
#endif /* __KERNEL__ */
+#ifndef CONFIG_LEON_PCI
/* generic pci stuff */
#include <asm-generic/pci.h>
+#else
+/*
+ * On LEON PCI Memory space is mapped 1:1 with physical address space.
+ *
+ * I/O space is located at low 64Kbytes in PCI I/O space. The I/O addresses
+ * are converted into CPU addresses to virtual addresses that are mapped with
+ * MMU to the PCI Host PCI I/O space window which are translated to the low
+ * 64Kbytes by the Host controller.
+ */
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res);
+
+extern void
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region);
+
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+ return PCI_IRQ_NONE;
+}
+#endif
#endif /* __SPARC_PCI_H */
diff --git a/arch/sparc/include/asm/pcic.h b/arch/sparc/include/asm/pcic.h
index 7eb5d78..6676cbc 100644
--- a/arch/sparc/include/asm/pcic.h
+++ b/arch/sparc/include/asm/pcic.h
@@ -29,7 +29,7 @@
int pcic_imdim;
};
-#ifdef CONFIG_PCI
+#ifdef CONFIG_PCIC_PCI
extern int pcic_present(void);
extern int pcic_probe(void);
extern void pci_time_init(void);
diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h
index c7ad3fe..b928b31 100644
--- a/arch/sparc/include/asm/ptrace.h
+++ b/arch/sparc/include/asm/ptrace.h
@@ -205,6 +205,7 @@
} while (0)
#define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV))
#define instruction_pointer(regs) ((regs)->tpc)
+#define instruction_pointer_set(regs, val) ((regs)->tpc = (val))
#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
#define regs_return_value(regs) ((regs)->u_regs[UREG_I0])
#ifdef CONFIG_SMP
diff --git a/arch/sparc/include/asm/system_32.h b/arch/sparc/include/asm/system_32.h
index 47a7e86..aba1609 100644
--- a/arch/sparc/include/asm/system_32.h
+++ b/arch/sparc/include/asm/system_32.h
@@ -220,7 +220,7 @@
switch (size) {
case 4:
return xchg_u32(ptr, x);
- };
+ }
__xchg_called_with_bad_pointer();
return x;
}
diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h
index 3c96d3b..10bcabc 100644
--- a/arch/sparc/include/asm/system_64.h
+++ b/arch/sparc/include/asm/system_64.h
@@ -234,7 +234,7 @@
return xchg32(ptr, x);
case 8:
return xchg64(ptr, x);
- };
+ }
__xchg_called_with_bad_pointer();
return x;
}
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 9cff270..b90b4a1 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -73,7 +73,9 @@
obj-y += dma.o
-obj-$(CONFIG_SPARC32_PCI) += pcic.o
+obj-$(CONFIG_PCIC_PCI) += pcic.o
+obj-$(CONFIG_LEON_PCI) += leon_pci.o
+obj-$(CONFIG_GRPCI2) += leon_pci_grpci2.o
obj-$(CONFIG_SMP) += trampoline_$(BITS).o smp_$(BITS).o
obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o leon_smp.o
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index 1e34f29..caef9de 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -123,7 +123,7 @@
default:
return -EINVAL;
- };
+ }
return 0;
}
diff --git a/arch/sparc/kernel/auxio_32.c b/arch/sparc/kernel/auxio_32.c
index 8505e0a..acf5151 100644
--- a/arch/sparc/kernel/auxio_32.c
+++ b/arch/sparc/kernel/auxio_32.c
@@ -101,7 +101,7 @@
break;
default:
panic("Can't set AUXIO register on this machine.");
- };
+ }
spin_unlock_irqrestore(&auxio_lock, flags);
}
EXPORT_SYMBOL(set_auxio);
diff --git a/arch/sparc/kernel/chmc.c b/arch/sparc/kernel/chmc.c
index 668c7be..5f45026 100644
--- a/arch/sparc/kernel/chmc.c
+++ b/arch/sparc/kernel/chmc.c
@@ -664,7 +664,7 @@
case 0x0:
bp->interleave = 16;
break;
- };
+ }
/* UK[10] is reserved, and UK[11] is not set for the SDRAM
* bank size definition.
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 8341963..f445e98 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -229,7 +229,7 @@
#ifdef CONFIG_SMP
.globl patchme_maybe_smp_msg
- cmp %l7, 12
+ cmp %l7, 11
patchme_maybe_smp_msg:
bgu maybe_smp4m_msg
nop
@@ -293,7 +293,7 @@
WRITE_PAUSE
wr %l4, PSR_ET, %psr
WRITE_PAUSE
- sll %o2, 28, %o2 ! shift for simpler checks below
+ srl %o3, 28, %o2 ! shift for simpler checks below
maybe_smp4m_msg_check_single:
andcc %o2, 0x1, %g0
beq,a maybe_smp4m_msg_check_mask
@@ -1604,7 +1604,7 @@
retl
nop
-#ifdef CONFIG_PCI
+#ifdef CONFIG_PCIC_PCI
#include <asm/pcic.h>
.align 4
@@ -1650,7 +1650,7 @@
rd %psr, %l0
.word 0
-#endif /* CONFIG_PCI */
+#endif /* CONFIG_PCIC_PCI */
.globl flushw_all
flushw_all:
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 2f538ac..d17255a 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -236,6 +236,21 @@
return leon_build_device_irq(real_irq, handle_simple_irq, "edge", 0);
}
+void leon_update_virq_handling(unsigned int virq,
+ irq_flow_handler_t flow_handler,
+ const char *name, int do_ack)
+{
+ unsigned long mask = (unsigned long)irq_get_chip_data(virq);
+
+ mask &= ~LEON_DO_ACK_HW;
+ if (do_ack)
+ mask |= LEON_DO_ACK_HW;
+
+ irq_set_chip_and_handler_name(virq, &leon_irq,
+ flow_handler, name);
+ irq_set_chip_data(virq, (void *)mask);
+}
+
void __init leon_init_timers(irq_handler_t counter_fn)
{
int irq, eirq;
@@ -361,6 +376,22 @@
prom_halt();
}
+#ifdef CONFIG_SMP
+ {
+ unsigned long flags;
+
+ /*
+ * In SMP, sun4m adds a IPI handler to IRQ trap handler that
+ * LEON never must take, sun4d and LEON overwrites the branch
+ * with a NOP.
+ */
+ local_irq_save(flags);
+ patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */
+ local_flush_cache_all();
+ local_irq_restore(flags);
+ }
+#endif
+
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl,
LEON3_GPTIMER_EN |
LEON3_GPTIMER_RL |
diff --git a/arch/sparc/kernel/leon_pci.c b/arch/sparc/kernel/leon_pci.c
new file mode 100644
index 0000000..a8a9a27
--- /dev/null
+++ b/arch/sparc/kernel/leon_pci.c
@@ -0,0 +1,253 @@
+/*
+ * leon_pci.c: LEON Host PCI support
+ *
+ * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
+ *
+ * Code is partially derived from pcic.c
+ */
+
+#include <linux/of_device.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/leon.h>
+#include <asm/leon_pci.h>
+
+/* The LEON architecture does not rely on a BIOS or bootloader to setup
+ * PCI for us. The Linux generic routines are used to setup resources,
+ * reset values of confuration-space registers settings ae preseved.
+ */
+void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info)
+{
+ struct pci_bus *root_bus;
+
+ root_bus = pci_scan_bus_parented(&ofdev->dev, 0, info->ops, info);
+ if (root_bus) {
+ root_bus->resource[0] = &info->io_space;
+ root_bus->resource[1] = &info->mem_space;
+ root_bus->resource[2] = NULL;
+
+ /* Init all PCI devices into PCI tree */
+ pci_bus_add_devices(root_bus);
+
+ /* Setup IRQs of all devices using custom routines */
+ pci_fixup_irqs(pci_common_swizzle, info->map_irq);
+
+ /* Assign devices with resources */
+ pci_assign_unassigned_resources();
+ }
+}
+
+/* PCI Memory and Prefetchable Memory is direct-mapped. However I/O Space is
+ * accessed through a Window which is translated to low 64KB in PCI space, the
+ * first 4KB is not used so 60KB is available.
+ *
+ * This function is used by generic code to translate resource addresses into
+ * PCI addresses.
+ */
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res)
+{
+ struct leon_pci_info *info = dev->bus->sysdata;
+
+ region->start = res->start;
+ region->end = res->end;
+
+ if (res->flags & IORESOURCE_IO) {
+ region->start -= (info->io_space.start - 0x1000);
+ region->end -= (info->io_space.start - 0x1000);
+ }
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+/* see pcibios_resource_to_bus() comment */
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region)
+{
+ struct leon_pci_info *info = dev->bus->sysdata;
+
+ res->start = region->start;
+ res->end = region->end;
+
+ if (res->flags & IORESOURCE_IO) {
+ res->start += (info->io_space.start - 0x1000);
+ res->end += (info->io_space.start - 0x1000);
+ }
+}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+
+void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
+{
+ struct leon_pci_info *info = pbus->sysdata;
+ struct pci_dev *dev;
+ int i, has_io, has_mem;
+ u16 cmd;
+
+ /* Generic PCI bus probing sets these to point at
+ * &io{port,mem}_resouce which is wrong for us.
+ */
+ if (pbus->self == NULL) {
+ pbus->resource[0] = &info->io_space;
+ pbus->resource[1] = &info->mem_space;
+ pbus->resource[2] = NULL;
+ }
+
+ list_for_each_entry(dev, &pbus->devices, bus_list) {
+ /*
+ * We can not rely on that the bootloader has enabled I/O
+ * or memory access to PCI devices. Instead we enable it here
+ * if the device has BARs of respective type.
+ */
+ has_io = has_mem = 0;
+ for (i = 0; i < PCI_ROM_RESOURCE; i++) {
+ unsigned long f = dev->resource[i].flags;
+ if (f & IORESOURCE_IO)
+ has_io = 1;
+ else if (f & IORESOURCE_MEM)
+ has_mem = 1;
+ }
+ /* ROM BARs are mapped into 32-bit memory space */
+ if (dev->resource[PCI_ROM_RESOURCE].end != 0) {
+ dev->resource[PCI_ROM_RESOURCE].flags |=
+ IORESOURCE_ROM_ENABLE;
+ has_mem = 1;
+ }
+ pci_bus_read_config_word(pbus, dev->devfn, PCI_COMMAND, &cmd);
+ if (has_io && !(cmd & PCI_COMMAND_IO)) {
+#ifdef CONFIG_PCI_DEBUG
+ printk(KERN_INFO "LEONPCI: Enabling I/O for dev %s\n",
+ pci_name(dev));
+#endif
+ cmd |= PCI_COMMAND_IO;
+ pci_bus_write_config_word(pbus, dev->devfn, PCI_COMMAND,
+ cmd);
+ }
+ if (has_mem && !(cmd & PCI_COMMAND_MEMORY)) {
+#ifdef CONFIG_PCI_DEBUG
+ printk(KERN_INFO "LEONPCI: Enabling MEMORY for dev"
+ "%s\n", pci_name(dev));
+#endif
+ cmd |= PCI_COMMAND_MEMORY;
+ pci_bus_write_config_word(pbus, dev->devfn, PCI_COMMAND,
+ cmd);
+ }
+ }
+}
+
+/*
+ * Other archs parse arguments here.
+ */
+char * __devinit pcibios_setup(char *str)
+{
+ return str;
+}
+
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ return res->start;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ return pci_enable_resources(dev, mask);
+}
+
+struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
+{
+ /*
+ * Currently the OpenBoot nodes are not connected with the PCI device,
+ * this is because the LEON PROM does not create PCI nodes. Eventually
+ * this will change and the same approach as pcic.c can be used to
+ * match PROM nodes with pci devices.
+ */
+ return NULL;
+}
+EXPORT_SYMBOL(pci_device_to_OF_node);
+
+void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+#ifdef CONFIG_PCI_DEBUG
+ printk(KERN_DEBUG "LEONPCI: Assigning IRQ %02d to %s\n", irq,
+ pci_name(dev));
+#endif
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+/* in/out routines taken from pcic.c
+ *
+ * This probably belongs here rather than ioport.c because
+ * we do not want this crud linked into SBus kernels.
+ * Also, think for a moment about likes of floppy.c that
+ * include architecture specific parts. They may want to redefine ins/outs.
+ *
+ * We do not use horrible macros here because we want to
+ * advance pointer by sizeof(size).
+ */
+void outsb(unsigned long addr, const void *src, unsigned long count)
+{
+ while (count) {
+ count -= 1;
+ outb(*(const char *)src, addr);
+ src += 1;
+ /* addr += 1; */
+ }
+}
+EXPORT_SYMBOL(outsb);
+
+void outsw(unsigned long addr, const void *src, unsigned long count)
+{
+ while (count) {
+ count -= 2;
+ outw(*(const short *)src, addr);
+ src += 2;
+ /* addr += 2; */
+ }
+}
+EXPORT_SYMBOL(outsw);
+
+void outsl(unsigned long addr, const void *src, unsigned long count)
+{
+ while (count) {
+ count -= 4;
+ outl(*(const long *)src, addr);
+ src += 4;
+ /* addr += 4; */
+ }
+}
+EXPORT_SYMBOL(outsl);
+
+void insb(unsigned long addr, void *dst, unsigned long count)
+{
+ while (count) {
+ count -= 1;
+ *(unsigned char *)dst = inb(addr);
+ dst += 1;
+ /* addr += 1; */
+ }
+}
+EXPORT_SYMBOL(insb);
+
+void insw(unsigned long addr, void *dst, unsigned long count)
+{
+ while (count) {
+ count -= 2;
+ *(unsigned short *)dst = inw(addr);
+ dst += 2;
+ /* addr += 2; */
+ }
+}
+EXPORT_SYMBOL(insw);
+
+void insl(unsigned long addr, void *dst, unsigned long count)
+{
+ while (count) {
+ count -= 4;
+ /*
+ * XXX I am sure we are in for an unaligned trap here.
+ */
+ *(unsigned long *)dst = inl(addr);
+ dst += 4;
+ /* addr += 4; */
+ }
+}
+EXPORT_SYMBOL(insl);
diff --git a/arch/sparc/kernel/leon_pci_grpci2.c b/arch/sparc/kernel/leon_pci_grpci2.c
new file mode 100644
index 0000000..44dc093
--- /dev/null
+++ b/arch/sparc/kernel/leon_pci_grpci2.c
@@ -0,0 +1,897 @@
+/*
+ * leon_pci_grpci2.c: GRPCI2 Host PCI driver
+ *
+ * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
+ *
+ */
+
+#include <linux/of_device.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/leon.h>
+#include <asm/vaddrs.h>
+#include <asm/sections.h>
+#include <asm/leon_pci.h>
+
+#include "irq.h"
+
+struct grpci2_barcfg {
+ unsigned long pciadr; /* PCI Space Address */
+ unsigned long ahbadr; /* PCI Base address mapped to this AHB addr */
+};
+
+/* Device Node Configuration options:
+ * - barcfgs : Custom Configuration of Host's 6 target BARs
+ * - irq_mask : Limit which PCI interrupts are enabled
+ * - do_reset : Force PCI Reset on startup
+ *
+ * barcfgs
+ * =======
+ *
+ * Optional custom Target BAR configuration (see struct grpci2_barcfg). All
+ * addresses are physical. Array always contains 6 elements (len=2*4*6 bytes)
+ *
+ * -1 means not configured (let host driver do default setup).
+ *
+ * [i*2+0] = PCI Address of BAR[i] on target interface
+ * [i*2+1] = Accessing PCI address of BAR[i] result in this AMBA address
+ *
+ *
+ * irq_mask
+ * ========
+ *
+ * Limit which PCI interrupts are enabled. 0=Disable, 1=Enable. By default
+ * all are enabled. Use this when PCI interrupt pins are floating on PCB.
+ * int, len=4.
+ * bit0 = PCI INTA#
+ * bit1 = PCI INTB#
+ * bit2 = PCI INTC#
+ * bit3 = PCI INTD#
+ *
+ *
+ * reset
+ * =====
+ *
+ * Force PCI reset on startup. int, len=4
+ */
+
+/* Enable Debugging Configuration Space Access */
+#undef GRPCI2_DEBUG_CFGACCESS
+
+/*
+ * GRPCI2 APB Register MAP
+ */
+struct grpci2_regs {
+ unsigned int ctrl; /* 0x00 Control */
+ unsigned int sts_cap; /* 0x04 Status / Capabilities */
+ int res1; /* 0x08 */
+ unsigned int io_map; /* 0x0C I/O Map address */
+ unsigned int dma_ctrl; /* 0x10 DMA */
+ unsigned int dma_bdbase; /* 0x14 DMA */
+ int res2[2]; /* 0x18 */
+ unsigned int bars[6]; /* 0x20 read-only PCI BARs */
+ int res3[2]; /* 0x38 */
+ unsigned int ahbmst_map[16]; /* 0x40 AHB->PCI Map per AHB Master */
+
+ /* PCI Trace Buffer Registers (OPTIONAL) */
+ unsigned int t_ctrl; /* 0x80 */
+ unsigned int t_cnt; /* 0x84 */
+ unsigned int t_adpat; /* 0x88 */
+ unsigned int t_admask; /* 0x8C */
+ unsigned int t_sigpat; /* 0x90 */
+ unsigned int t_sigmask; /* 0x94 */
+ unsigned int t_adstate; /* 0x98 */
+ unsigned int t_sigstate; /* 0x9C */
+};
+
+#define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a))))
+#define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a)))
+
+#define CTRL_BUS_BIT 16
+
+#define CTRL_RESET (1<<31)
+#define CTRL_SI (1<<27)
+#define CTRL_PE (1<<26)
+#define CTRL_EI (1<<25)
+#define CTRL_ER (1<<24)
+#define CTRL_BUS (0xff<<CTRL_BUS_BIT)
+#define CTRL_HOSTINT 0xf
+
+#define STS_HOST_BIT 31
+#define STS_MST_BIT 30
+#define STS_TAR_BIT 29
+#define STS_DMA_BIT 28
+#define STS_DI_BIT 27
+#define STS_HI_BIT 26
+#define STS_IRQMODE_BIT 24
+#define STS_TRACE_BIT 23
+#define STS_CFGERRVALID_BIT 20
+#define STS_CFGERR_BIT 19
+#define STS_INTTYPE_BIT 12
+#define STS_INTSTS_BIT 8
+#define STS_FDEPTH_BIT 2
+#define STS_FNUM_BIT 0
+
+#define STS_HOST (1<<STS_HOST_BIT)
+#define STS_MST (1<<STS_MST_BIT)
+#define STS_TAR (1<<STS_TAR_BIT)
+#define STS_DMA (1<<STS_DMA_BIT)
+#define STS_DI (1<<STS_DI_BIT)
+#define STS_HI (1<<STS_HI_BIT)
+#define STS_IRQMODE (0x3<<STS_IRQMODE_BIT)
+#define STS_TRACE (1<<STS_TRACE_BIT)
+#define STS_CFGERRVALID (1<<STS_CFGERRVALID_BIT)
+#define STS_CFGERR (1<<STS_CFGERR_BIT)
+#define STS_INTTYPE (0x3f<<STS_INTTYPE_BIT)
+#define STS_INTSTS (0xf<<STS_INTSTS_BIT)
+#define STS_FDEPTH (0x7<<STS_FDEPTH_BIT)
+#define STS_FNUM (0x3<<STS_FNUM_BIT)
+
+#define STS_ISYSERR (1<<17)
+#define STS_IDMA (1<<16)
+#define STS_IDMAERR (1<<15)
+#define STS_IMSTABRT (1<<14)
+#define STS_ITGTABRT (1<<13)
+#define STS_IPARERR (1<<12)
+
+#define STS_ERR_IRQ (STS_ISYSERR | STS_IMSTABRT | STS_ITGTABRT | STS_IPARERR)
+
+struct grpci2_bd_chan {
+ unsigned int ctrl; /* 0x00 DMA Control */
+ unsigned int nchan; /* 0x04 Next DMA Channel Address */
+ unsigned int nbd; /* 0x08 Next Data Descriptor in chan */
+ unsigned int res; /* 0x0C Reserved */
+};
+
+#define BD_CHAN_EN 0x80000000
+#define BD_CHAN_TYPE 0x00300000
+#define BD_CHAN_BDCNT 0x0000ffff
+#define BD_CHAN_EN_BIT 31
+#define BD_CHAN_TYPE_BIT 20
+#define BD_CHAN_BDCNT_BIT 0
+
+struct grpci2_bd_data {
+ unsigned int ctrl; /* 0x00 DMA Data Control */
+ unsigned int pci_adr; /* 0x04 PCI Start Address */
+ unsigned int ahb_adr; /* 0x08 AHB Start address */
+ unsigned int next; /* 0x0C Next Data Descriptor in chan */
+};
+
+#define BD_DATA_EN 0x80000000
+#define BD_DATA_IE 0x40000000
+#define BD_DATA_DR 0x20000000
+#define BD_DATA_TYPE 0x00300000
+#define BD_DATA_ER 0x00080000
+#define BD_DATA_LEN 0x0000ffff
+#define BD_DATA_EN_BIT 31
+#define BD_DATA_IE_BIT 30
+#define BD_DATA_DR_BIT 29
+#define BD_DATA_TYPE_BIT 20
+#define BD_DATA_ER_BIT 19
+#define BD_DATA_LEN_BIT 0
+
+/* GRPCI2 Capability */
+struct grpci2_cap_first {
+ unsigned int ctrl;
+ unsigned int pci2ahb_map[6];
+ unsigned int ext2ahb_map;
+ unsigned int io_map;
+ unsigned int pcibar_size[6];
+};
+#define CAP9_CTRL_OFS 0
+#define CAP9_BAR_OFS 0x4
+#define CAP9_IOMAP_OFS 0x20
+#define CAP9_BARSIZE_OFS 0x24
+
+struct grpci2_priv {
+ struct leon_pci_info info; /* must be on top of this structure */
+ struct grpci2_regs *regs;
+ char irq;
+ char irq_mode; /* IRQ Mode from CAPSTS REG */
+ char bt_enabled;
+ char do_reset;
+ char irq_mask;
+ u32 pciid; /* PCI ID of Host */
+ unsigned char irq_map[4];
+
+ /* Virtual IRQ numbers */
+ unsigned int virq_err;
+ unsigned int virq_dma;
+
+ /* AHB PCI Windows */
+ unsigned long pci_area; /* MEMORY */
+ unsigned long pci_area_end;
+ unsigned long pci_io; /* I/O */
+ unsigned long pci_conf; /* CONFIGURATION */
+ unsigned long pci_conf_end;
+ unsigned long pci_io_va;
+
+ struct grpci2_barcfg tgtbars[6];
+};
+
+DEFINE_SPINLOCK(grpci2_dev_lock);
+struct grpci2_priv *grpci2priv;
+
+int grpci2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct grpci2_priv *priv = dev->bus->sysdata;
+ int irq_group;
+
+ /* Use default IRQ decoding on PCI BUS0 according slot numbering */
+ irq_group = slot & 0x3;
+ pin = ((pin - 1) + irq_group) & 0x3;
+
+ return priv->irq_map[pin];
+}
+
+static int grpci2_cfg_r32(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 *val)
+{
+ unsigned int *pci_conf;
+ unsigned long flags;
+ u32 tmp;
+
+ if (where & 0x3)
+ return -EINVAL;
+
+ if (bus == 0 && PCI_SLOT(devfn) != 0)
+ devfn += (0x8 * 6);
+
+ /* Select bus */
+ spin_lock_irqsave(&grpci2_dev_lock, flags);
+ REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
+ (bus << 16));
+ spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+
+ /* clear old status */
+ REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
+
+ pci_conf = (unsigned int *) (priv->pci_conf |
+ (devfn << 8) | (where & 0xfc));
+ tmp = LEON3_BYPASS_LOAD_PA(pci_conf);
+
+ /* Wait until GRPCI2 signals that CFG access is done, it should be
+ * done instantaneously unless a DMA operation is ongoing...
+ */
+ while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
+ ;
+
+ if (REGLOAD(priv->regs->sts_cap) & STS_CFGERR) {
+ *val = 0xffffffff;
+ } else {
+ /* Bus always little endian (unaffected by byte-swapping) */
+ *val = flip_dword(tmp);
+ }
+
+ return 0;
+}
+
+static int grpci2_cfg_r16(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 *val)
+{
+ u32 v;
+ int ret;
+
+ if (where & 0x1)
+ return -EINVAL;
+ ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
+ *val = 0xffff & (v >> (8 * (where & 0x3)));
+ return ret;
+}
+
+static int grpci2_cfg_r8(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 *val)
+{
+ u32 v;
+ int ret;
+
+ ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
+ *val = 0xff & (v >> (8 * (where & 3)));
+
+ return ret;
+}
+
+static int grpci2_cfg_w32(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 val)
+{
+ unsigned int *pci_conf;
+ unsigned long flags;
+
+ if (where & 0x3)
+ return -EINVAL;
+
+ if (bus == 0 && PCI_SLOT(devfn) != 0)
+ devfn += (0x8 * 6);
+
+ /* Select bus */
+ spin_lock_irqsave(&grpci2_dev_lock, flags);
+ REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
+ (bus << 16));
+ spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+
+ /* clear old status */
+ REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
+
+ pci_conf = (unsigned int *) (priv->pci_conf |
+ (devfn << 8) | (where & 0xfc));
+ LEON3_BYPASS_STORE_PA(pci_conf, flip_dword(val));
+
+ /* Wait until GRPCI2 signals that CFG access is done, it should be
+ * done instantaneously unless a DMA operation is ongoing...
+ */
+ while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
+ ;
+
+ return 0;
+}
+
+static int grpci2_cfg_w16(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 val)
+{
+ int ret;
+ u32 v;
+
+ if (where & 0x1)
+ return -EINVAL;
+ ret = grpci2_cfg_r32(priv, bus, devfn, where&~3, &v);
+ if (ret)
+ return ret;
+ v = (v & ~(0xffff << (8 * (where & 0x3)))) |
+ ((0xffff & val) << (8 * (where & 0x3)));
+ return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
+}
+
+static int grpci2_cfg_w8(struct grpci2_priv *priv, unsigned int bus,
+ unsigned int devfn, int where, u32 val)
+{
+ int ret;
+ u32 v;
+
+ ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
+ if (ret != 0)
+ return ret;
+ v = (v & ~(0xff << (8 * (where & 0x3)))) |
+ ((0xff & val) << (8 * (where & 0x3)));
+ return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
+}
+
+/* Read from Configuration Space. When entering here the PCI layer has taken
+ * the pci_lock spinlock and IRQ is off.
+ */
+static int grpci2_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct grpci2_priv *priv = grpci2priv;
+ unsigned int busno = bus->number;
+ int ret;
+
+ if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) {
+ *val = ~0;
+ return 0;
+ }
+
+ switch (size) {
+ case 1:
+ ret = grpci2_cfg_r8(priv, busno, devfn, where, val);
+ break;
+ case 2:
+ ret = grpci2_cfg_r16(priv, busno, devfn, where, val);
+ break;
+ case 4:
+ ret = grpci2_cfg_r32(priv, busno, devfn, where, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+#ifdef GRPCI2_DEBUG_CFGACCESS
+ printk(KERN_INFO "grpci2_read_config: [%02x:%02x:%x] ofs=%d val=%x "
+ "size=%d\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where,
+ *val, size);
+#endif
+
+ return ret;
+}
+
+/* Write to Configuration Space. When entering here the PCI layer has taken
+ * the pci_lock spinlock and IRQ is off.
+ */
+static int grpci2_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ struct grpci2_priv *priv = grpci2priv;
+ unsigned int busno = bus->number;
+
+ if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0))
+ return 0;
+
+#ifdef GRPCI2_DEBUG_CFGACCESS
+ printk(KERN_INFO "grpci2_write_config: [%02x:%02x:%x] ofs=%d size=%d "
+ "val=%x\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn),
+ where, size, val);
+#endif
+
+ switch (size) {
+ default:
+ return -EINVAL;
+ case 1:
+ return grpci2_cfg_w8(priv, busno, devfn, where, val);
+ case 2:
+ return grpci2_cfg_w16(priv, busno, devfn, where, val);
+ case 4:
+ return grpci2_cfg_w32(priv, busno, devfn, where, val);
+ }
+}
+
+static struct pci_ops grpci2_ops = {
+ .read = grpci2_read_config,
+ .write = grpci2_write_config,
+};
+
+/* GENIRQ IRQ chip implementation for GRPCI2 irqmode=0..2. In configuration
+ * 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller
+ * this is not needed and the standard IRQ controller can be used.
+ */
+
+static void grpci2_mask_irq(struct irq_data *data)
+{
+ unsigned long flags;
+ unsigned int irqidx;
+ struct grpci2_priv *priv = grpci2priv;
+
+ irqidx = (unsigned int)data->chip_data - 1;
+ if (irqidx > 3) /* only mask PCI interrupts here */
+ return;
+
+ spin_lock_irqsave(&grpci2_dev_lock, flags);
+ REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) & ~(1 << irqidx));
+ spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+}
+
+static void grpci2_unmask_irq(struct irq_data *data)
+{
+ unsigned long flags;
+ unsigned int irqidx;
+ struct grpci2_priv *priv = grpci2priv;
+
+ irqidx = (unsigned int)data->chip_data - 1;
+ if (irqidx > 3) /* only unmask PCI interrupts here */
+ return;
+
+ spin_lock_irqsave(&grpci2_dev_lock, flags);
+ REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) | (1 << irqidx));
+ spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+}
+
+static unsigned int grpci2_startup_irq(struct irq_data *data)
+{
+ grpci2_unmask_irq(data);
+ return 0;
+}
+
+static void grpci2_shutdown_irq(struct irq_data *data)
+{
+ grpci2_mask_irq(data);
+}
+
+static struct irq_chip grpci2_irq = {
+ .name = "grpci2",
+ .irq_startup = grpci2_startup_irq,
+ .irq_shutdown = grpci2_shutdown_irq,
+ .irq_mask = grpci2_mask_irq,
+ .irq_unmask = grpci2_unmask_irq,
+};
+
+/* Handle one or multiple IRQs from the PCI core */
+static void grpci2_pci_flow_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct grpci2_priv *priv = grpci2priv;
+ int i, ack = 0;
+ unsigned int ctrl, sts_cap, pci_ints;
+
+ ctrl = REGLOAD(priv->regs->ctrl);
+ sts_cap = REGLOAD(priv->regs->sts_cap);
+
+ /* Error Interrupt? */
+ if (sts_cap & STS_ERR_IRQ) {
+ generic_handle_irq(priv->virq_err);
+ ack = 1;
+ }
+
+ /* PCI Interrupt? */
+ pci_ints = ((~sts_cap) >> STS_INTSTS_BIT) & ctrl & CTRL_HOSTINT;
+ if (pci_ints) {
+ /* Call respective PCI Interrupt handler */
+ for (i = 0; i < 4; i++) {
+ if (pci_ints & (1 << i))
+ generic_handle_irq(priv->irq_map[i]);
+ }
+ ack = 1;
+ }
+
+ /*
+ * Decode DMA Interrupt only when shared with Err and PCI INTX#, when
+ * the DMA is a unique IRQ the DMA interrupts doesn't end up here, they
+ * goes directly to DMA ISR.
+ */
+ if ((priv->irq_mode == 0) && (sts_cap & (STS_IDMA | STS_IDMAERR))) {
+ generic_handle_irq(priv->virq_dma);
+ ack = 1;
+ }
+
+ /*
+ * Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ
+ * Controller, this must be done after IRQ sources have been handled to
+ * avoid double IRQ generation
+ */
+ if (ack)
+ desc->irq_data.chip->irq_eoi(&desc->irq_data);
+}
+
+/* Create a virtual IRQ */
+static unsigned int grpci2_build_device_irq(unsigned int irq)
+{
+ unsigned int virq = 0, pil;
+
+ pil = 1 << 8;
+ virq = irq_alloc(irq, pil);
+ if (virq == 0)
+ goto out;
+
+ irq_set_chip_and_handler_name(virq, &grpci2_irq, handle_simple_irq,
+ "pcilvl");
+ irq_set_chip_data(virq, (void *)irq);
+
+out:
+ return virq;
+}
+
+void grpci2_hw_init(struct grpci2_priv *priv)
+{
+ u32 ahbadr, pciadr, bar_sz, capptr, io_map, data;
+ struct grpci2_regs *regs = priv->regs;
+ int i;
+ struct grpci2_barcfg *barcfg = priv->tgtbars;
+
+ /* Reset any earlier setup */
+ if (priv->do_reset) {
+ printk(KERN_INFO "GRPCI2: Resetting PCI bus\n");
+ REGSTORE(regs->ctrl, CTRL_RESET);
+ ssleep(1); /* Wait for boards to settle */
+ }
+ REGSTORE(regs->ctrl, 0);
+ REGSTORE(regs->sts_cap, ~0); /* Clear Status */
+ REGSTORE(regs->dma_ctrl, 0);
+ REGSTORE(regs->dma_bdbase, 0);
+
+ /* Translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */
+ REGSTORE(regs->io_map, REGLOAD(regs->io_map) & 0x0000ffff);
+
+ /* set 1:1 mapping between AHB -> PCI memory space, for all Masters
+ * Each AHB master has it's own mapping registers. Max 16 AHB masters.
+ */
+ for (i = 0; i < 16; i++)
+ REGSTORE(regs->ahbmst_map[i], priv->pci_area);
+
+ /* Get the GRPCI2 Host PCI ID */
+ grpci2_cfg_r32(priv, 0, 0, PCI_VENDOR_ID, &priv->pciid);
+
+ /* Get address to first (always defined) capability structure */
+ grpci2_cfg_r8(priv, 0, 0, PCI_CAPABILITY_LIST, &capptr);
+
+ /* Enable/Disable Byte twisting */
+ grpci2_cfg_r32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, &io_map);
+ io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0);
+ grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, io_map);
+
+ /* Setup the Host's PCI Target BARs for other peripherals to access,
+ * and do DMA to the host's memory. The target BARs can be sized and
+ * enabled individually.
+ *
+ * User may set custom target BARs, but default is:
+ * The first BARs is used to map kernel low (DMA is part of normal
+ * region on sparc which is SRMMU_MAXMEM big) main memory 1:1 to the
+ * PCI bus, the other BARs are disabled. We assume that the first BAR
+ * is always available.
+ */
+ for (i = 0; i < 6; i++) {
+ if (barcfg[i].pciadr != ~0 && barcfg[i].ahbadr != ~0) {
+ /* Target BARs must have the proper alignment */
+ ahbadr = barcfg[i].ahbadr;
+ pciadr = barcfg[i].pciadr;
+ bar_sz = ((pciadr - 1) & ~pciadr) + 1;
+ } else {
+ if (i == 0) {
+ /* Map main memory */
+ bar_sz = 0xf0000008; /* 256MB prefetchable */
+ ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN(
+ (unsigned long) &_end));
+ pciadr = ahbadr;
+ } else {
+ bar_sz = 0;
+ ahbadr = 0;
+ pciadr = 0;
+ }
+ }
+ grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BARSIZE_OFS+i*4, bar_sz);
+ grpci2_cfg_w32(priv, 0, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
+ grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
+ printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n",
+ i, pciadr, ahbadr);
+ }
+
+ /* set as bus master and enable pci memory responses */
+ grpci2_cfg_r32(priv, 0, 0, PCI_COMMAND, &data);
+ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ grpci2_cfg_w32(priv, 0, 0, PCI_COMMAND, data);
+
+ /* Enable Error respone (CPU-TRAP) on illegal memory access. */
+ REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE);
+}
+
+static irqreturn_t grpci2_jump_interrupt(int irq, void *arg)
+{
+ printk(KERN_ERR "GRPCI2: Jump IRQ happened\n");
+ return IRQ_NONE;
+}
+
+/* Handle GRPCI2 Error Interrupt */
+static irqreturn_t grpci2_err_interrupt(int irq, void *arg)
+{
+ struct grpci2_priv *priv = arg;
+ struct grpci2_regs *regs = priv->regs;
+ unsigned int status;
+
+ status = REGLOAD(regs->sts_cap);
+ if ((status & STS_ERR_IRQ) == 0)
+ return IRQ_NONE;
+
+ if (status & STS_IPARERR)
+ printk(KERN_ERR "GRPCI2: Parity Error\n");
+
+ if (status & STS_ITGTABRT)
+ printk(KERN_ERR "GRPCI2: Target Abort\n");
+
+ if (status & STS_IMSTABRT)
+ printk(KERN_ERR "GRPCI2: Master Abort\n");
+
+ if (status & STS_ISYSERR)
+ printk(KERN_ERR "GRPCI2: System Error\n");
+
+ /* Clear handled INT TYPE IRQs */
+ REGSTORE(regs->sts_cap, status & STS_ERR_IRQ);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit grpci2_of_probe(struct platform_device *ofdev)
+{
+ struct grpci2_regs *regs;
+ struct grpci2_priv *priv;
+ int err, i, len;
+ const int *tmp;
+ unsigned int capability;
+
+ if (grpci2priv) {
+ printk(KERN_ERR "GRPCI2: only one GRPCI2 core supported\n");
+ return -ENODEV;
+ }
+
+ if (ofdev->num_resources < 3) {
+ printk(KERN_ERR "GRPCI2: not enough APB/AHB resources\n");
+ return -EIO;
+ }
+
+ /* Find Device Address */
+ regs = of_ioremap(&ofdev->resource[0], 0,
+ resource_size(&ofdev->resource[0]),
+ "grlib-grpci2 regs");
+ if (regs == NULL) {
+ printk(KERN_ERR "GRPCI2: ioremap failed\n");
+ return -EIO;
+ }
+
+ /*
+ * Check that we're in Host Slot and that we can act as a Host Bridge
+ * and not only as target.
+ */
+ capability = REGLOAD(regs->sts_cap);
+ if ((capability & STS_HOST) || !(capability & STS_MST)) {
+ printk(KERN_INFO "GRPCI2: not in host system slot\n");
+ err = -EIO;
+ goto err1;
+ }
+
+ priv = grpci2priv = kzalloc(sizeof(struct grpci2_priv), GFP_KERNEL);
+ if (grpci2priv == NULL) {
+ err = -ENOMEM;
+ goto err1;
+ }
+ memset(grpci2priv, 0, sizeof(*grpci2priv));
+ priv->regs = regs;
+ priv->irq = ofdev->archdata.irqs[0]; /* BASE IRQ */
+ priv->irq_mode = (capability & STS_IRQMODE) >> STS_IRQMODE_BIT;
+
+ printk(KERN_INFO "GRPCI2: host found at %p, irq%d\n", regs, priv->irq);
+
+ /* Byte twisting should be made configurable from kernel command line */
+ priv->bt_enabled = 1;
+
+ /* Let user do custom Target BAR assignment */
+ tmp = of_get_property(ofdev->dev.of_node, "barcfg", &len);
+ if (tmp && (len == 2*4*6))
+ memcpy(priv->tgtbars, tmp, 2*4*6);
+ else
+ memset(priv->tgtbars, -1, 2*4*6);
+
+ /* Limit IRQ unmasking in irq_mode 2 and 3 */
+ tmp = of_get_property(ofdev->dev.of_node, "irq_mask", &len);
+ if (tmp && (len == 4))
+ priv->do_reset = *tmp;
+ else
+ priv->irq_mask = 0xf;
+
+ /* Optional PCI reset. Force PCI reset on startup */
+ tmp = of_get_property(ofdev->dev.of_node, "reset", &len);
+ if (tmp && (len == 4))
+ priv->do_reset = *tmp;
+ else
+ priv->do_reset = 0;
+
+ /* Find PCI Memory, I/O and Configuration Space Windows */
+ priv->pci_area = ofdev->resource[1].start;
+ priv->pci_area_end = ofdev->resource[1].end+1;
+ priv->pci_io = ofdev->resource[2].start;
+ priv->pci_conf = ofdev->resource[2].start + 0x10000;
+ priv->pci_conf_end = priv->pci_conf + 0x10000;
+ priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000);
+ if (!priv->pci_io_va) {
+ err = -EIO;
+ goto err2;
+ }
+
+ printk(KERN_INFO
+ "GRPCI2: MEMORY SPACE [0x%08lx - 0x%08lx]\n"
+ " I/O SPACE [0x%08lx - 0x%08lx]\n"
+ " CONFIG SPACE [0x%08lx - 0x%08lx]\n",
+ priv->pci_area, priv->pci_area_end-1,
+ priv->pci_io, priv->pci_conf-1,
+ priv->pci_conf, priv->pci_conf_end-1);
+
+ /*
+ * I/O Space resources in I/O Window mapped into Virtual Adr Space
+ * We never use low 4KB because some devices seem have problems using
+ * address 0.
+ */
+ memset(&priv->info.io_space, 0, sizeof(struct resource));
+ priv->info.io_space.name = "GRPCI2 PCI I/O Space";
+ priv->info.io_space.start = priv->pci_io_va + 0x1000;
+ priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1;
+ priv->info.io_space.flags = IORESOURCE_IO;
+
+ /*
+ * GRPCI2 has no prefetchable memory, map everything as
+ * non-prefetchable memory
+ */
+ memset(&priv->info.mem_space, 0, sizeof(struct resource));
+ priv->info.mem_space.name = "GRPCI2 PCI MEM Space";
+ priv->info.mem_space.start = priv->pci_area;
+ priv->info.mem_space.end = priv->pci_area_end - 1;
+ priv->info.mem_space.flags = IORESOURCE_MEM;
+
+ if (request_resource(&iomem_resource, &priv->info.mem_space) < 0)
+ goto err3;
+ if (request_resource(&ioport_resource, &priv->info.io_space) < 0)
+ goto err4;
+
+ grpci2_hw_init(priv);
+
+ /*
+ * Get PCI Interrupt to System IRQ mapping and setup IRQ handling
+ * Error IRQ always on PCI INTA.
+ */
+ if (priv->irq_mode < 2) {
+ /* All PCI interrupts are shared using the same system IRQ */
+ leon_update_virq_handling(priv->irq, grpci2_pci_flow_irq,
+ "pcilvl", 0);
+
+ priv->irq_map[0] = grpci2_build_device_irq(1);
+ priv->irq_map[1] = grpci2_build_device_irq(2);
+ priv->irq_map[2] = grpci2_build_device_irq(3);
+ priv->irq_map[3] = grpci2_build_device_irq(4);
+
+ priv->virq_err = grpci2_build_device_irq(5);
+ if (priv->irq_mode & 1)
+ priv->virq_dma = ofdev->archdata.irqs[1];
+ else
+ priv->virq_dma = grpci2_build_device_irq(6);
+
+ /* Enable IRQs on LEON IRQ controller */
+ err = request_irq(priv->irq, grpci2_jump_interrupt, 0,
+ "GRPCI2_JUMP", priv);
+ if (err)
+ printk(KERN_ERR "GRPCI2: ERR IRQ request failed\n");
+ } else {
+ /* All PCI interrupts have an unique IRQ interrupt */
+ for (i = 0; i < 4; i++) {
+ /* Make LEON IRQ layer handle level IRQ by acking */
+ leon_update_virq_handling(ofdev->archdata.irqs[i],
+ handle_fasteoi_irq, "pcilvl",
+ 1);
+ priv->irq_map[i] = ofdev->archdata.irqs[i];
+ }
+ priv->virq_err = priv->irq_map[0];
+ if (priv->irq_mode & 1)
+ priv->virq_dma = ofdev->archdata.irqs[4];
+ else
+ priv->virq_dma = priv->irq_map[0];
+
+ /* Unmask all PCI interrupts, request_irq will not do that */
+ REGSTORE(regs->ctrl, REGLOAD(regs->ctrl)|(priv->irq_mask&0xf));
+ }
+
+ /* Setup IRQ handler for non-configuration space access errors */
+ err = request_irq(priv->virq_err, grpci2_err_interrupt, IRQF_SHARED,
+ "GRPCI2_ERR", priv);
+ if (err) {
+ printk(KERN_DEBUG "GRPCI2: ERR VIRQ request failed: %d\n", err);
+ goto err5;
+ }
+
+ /*
+ * Enable Error Interrupts. PCI interrupts are unmasked once request_irq
+ * is called by the PCI Device drivers
+ */
+ REGSTORE(regs->ctrl, REGLOAD(regs->ctrl) | CTRL_EI | CTRL_SI);
+
+ /* Init common layer and scan buses */
+ priv->info.ops = &grpci2_ops;
+ priv->info.map_irq = grpci2_map_irq;
+ leon_pci_init(ofdev, &priv->info);
+
+ return 0;
+
+err5:
+ release_resource(&priv->info.io_space);
+err4:
+ release_resource(&priv->info.mem_space);
+err3:
+ err = -ENOMEM;
+ iounmap((void *)priv->pci_io_va);
+err2:
+ kfree(priv);
+err1:
+ of_iounmap(&ofdev->resource[0], regs,
+ resource_size(&ofdev->resource[0]));
+ return err;
+}
+
+static struct of_device_id grpci2_of_match[] = {
+ {
+ .name = "GAISLER_GRPCI2",
+ },
+ {
+ .name = "01_07c",
+ },
+ {},
+};
+
+static struct platform_driver grpci2_of_driver = {
+ .driver = {
+ .name = "grpci2",
+ .owner = THIS_MODULE,
+ .of_match_table = grpci2_of_match,
+ },
+ .probe = grpci2_of_probe,
+};
+
+static int __init grpci2_init(void)
+{
+ return platform_driver_register(&grpci2_of_driver);
+}
+
+subsys_initcall(grpci2_init);
diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c
index 8d348c4..99ba5ba 100644
--- a/arch/sparc/kernel/module.c
+++ b/arch/sparc/kernel/module.c
@@ -214,7 +214,7 @@
me->name,
(int) (ELF_R_TYPE(rel[i].r_info) & 0xff));
return -ENOEXEC;
- };
+ }
}
return 0;
}
diff --git a/arch/sparc/kernel/pci_common.c b/arch/sparc/kernel/pci_common.c
index 6e3874b..a689598 100644
--- a/arch/sparc/kernel/pci_common.c
+++ b/arch/sparc/kernel/pci_common.c
@@ -281,7 +281,7 @@
case 4:
*value = ret & 0xffffffff;
break;
- };
+ }
return PCIBIOS_SUCCESSFUL;
@@ -456,7 +456,7 @@
default:
break;
- };
+ }
}
if (!saw_io || !saw_mem) {
diff --git a/arch/sparc/kernel/pci_schizo.c b/arch/sparc/kernel/pci_schizo.c
index 283fbc3..f030b02 100644
--- a/arch/sparc/kernel/pci_schizo.c
+++ b/arch/sparc/kernel/pci_schizo.c
@@ -264,7 +264,7 @@
default:
type_string = "ECC Error";
break;
- };
+ }
printk("%s: IOMMU Error, type[%s]\n",
pbm->name, type_string);
@@ -319,7 +319,7 @@
default:
type_string = "ECC Error";
break;
- };
+ }
printk("%s: IOMMU TAG(%d)[error(%s) ctx(%x) wr(%d) str(%d) "
"sz(%dK) vpg(%08lx)]\n",
pbm->name, i, type_string,
@@ -1328,7 +1328,7 @@
default:
chipset_name = "SCHIZO";
break;
- };
+ }
/* For SCHIZO, three OBP regs:
* 1) PBM controller regs
diff --git a/arch/sparc/kernel/prom_irqtrans.c b/arch/sparc/kernel/prom_irqtrans.c
index 570b98f..40e4936 100644
--- a/arch/sparc/kernel/prom_irqtrans.c
+++ b/arch/sparc/kernel/prom_irqtrans.c
@@ -694,7 +694,7 @@
case 3:
iclr = reg_base + SYSIO_ICLR_SLOT3;
break;
- };
+ }
iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
}
diff --git a/arch/sparc/kernel/psycho_common.c b/arch/sparc/kernel/psycho_common.c
index fe2af66..8db48e8 100644
--- a/arch/sparc/kernel/psycho_common.c
+++ b/arch/sparc/kernel/psycho_common.c
@@ -228,7 +228,7 @@
default:
type_str = "ECC Error";
break;
- };
+ }
printk(KERN_ERR "%s: IOMMU Error, type[%s]\n",
pbm->name, type_str);
diff --git a/arch/sparc/kernel/sbus.c b/arch/sparc/kernel/sbus.c
index 2ca32d1..a161b9c 100644
--- a/arch/sparc/kernel/sbus.c
+++ b/arch/sparc/kernel/sbus.c
@@ -97,7 +97,7 @@
default:
return;
- };
+ }
val = upa_readq(cfg_reg);
if (val & (1UL << 14UL)) {
@@ -244,7 +244,7 @@
case 3:
iclr = reg_base + SYSIO_ICLR_SLOT3;
break;
- };
+ }
iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
}
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index 3249d3f..d26e1f6 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -267,7 +267,7 @@
default:
printk("UNKNOWN!\n");
break;
- };
+ }
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index f3b6850..c4dd099 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -209,7 +209,7 @@
default:
prom_printf("Unknown cpu type, halting.\n");
prom_halt();
- };
+ }
*(unsigned int *) (addr + 0) = insns[0];
wmb();
diff --git a/arch/sparc/kernel/smp_32.c b/arch/sparc/kernel/smp_32.c
index d5b3958..21b1253 100644
--- a/arch/sparc/kernel/smp_32.c
+++ b/arch/sparc/kernel/smp_32.c
@@ -114,7 +114,7 @@
printk("UNKNOWN!\n");
BUG();
break;
- };
+ }
}
void cpu_panic(void)
@@ -374,7 +374,7 @@
printk("UNKNOWN!\n");
BUG();
break;
- };
+ }
}
/* Set this up early so that things like the scheduler can init
@@ -447,7 +447,7 @@
printk("UNKNOWN!\n");
BUG();
break;
- };
+ }
if (!ret) {
cpumask_set_cpu(cpu, &smp_commenced_mask);
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index a9ea60e..1d13c5b 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -103,10 +103,9 @@
sbil = (sbusl << 2);
/* Loop for each pending SBI */
- for (sbino = 0; bus_mask; sbino++) {
+ for (sbino = 0; bus_mask; sbino++, bus_mask >>= 1) {
unsigned int idx, mask;
- bus_mask >>= 1;
if (!(bus_mask & 1))
continue;
/* XXX This seems to ACK the irq twice. acquire_sbi()
@@ -118,19 +117,16 @@
mask &= (0xf << sbil);
/* Loop for each pending SBI slot */
- idx = 0;
slot = (1 << sbil);
- while (mask != 0) {
+ for (idx = 0; mask != 0; idx++, slot <<= 1) {
unsigned int pil;
struct irq_bucket *p;
- idx++;
- slot <<= 1;
if (!(mask & slot))
continue;
mask &= ~slot;
- pil = sun4d_encode_irq(sbino, sbil, idx);
+ pil = sun4d_encode_irq(sbino, sbusl, idx);
p = irq_map[pil];
while (p) {
@@ -218,10 +214,10 @@
#ifdef CONFIG_SMP
spin_lock_irqsave(&sun4d_imsk_lock, flags);
- cc_set_imsk_other(cpuid, cc_get_imsk_other(cpuid) | ~(1 << real_irq));
+ cc_set_imsk_other(cpuid, cc_get_imsk_other(cpuid) & ~(1 << real_irq));
spin_unlock_irqrestore(&sun4d_imsk_lock, flags);
#else
- cc_set_imsk(cc_get_imsk() | ~(1 << real_irq));
+ cc_set_imsk(cc_get_imsk() & ~(1 << real_irq));
#endif
}
@@ -299,58 +295,19 @@
}
}
-unsigned int sun4d_build_device_irq(struct platform_device *op,
- unsigned int real_irq)
+unsigned int _sun4d_build_device_irq(unsigned int real_irq,
+ unsigned int pil,
+ unsigned int board)
{
- struct device_node *dp = op->dev.of_node;
- struct device_node *io_unit, *sbi = dp->parent;
- const struct linux_prom_registers *regs;
struct sun4d_handler_data *handler_data;
- unsigned int pil;
unsigned int irq;
- int board, slot;
- int sbusl;
-
- irq = 0;
- while (sbi) {
- if (!strcmp(sbi->name, "sbi"))
- break;
-
- sbi = sbi->parent;
- }
- if (!sbi)
- goto err_out;
-
- regs = of_get_property(dp, "reg", NULL);
- if (!regs)
- goto err_out;
-
- slot = regs->which_io;
-
- /*
- * If SBI's parent is not io-unit or the io-unit lacks
- * a "board#" property, something is very wrong.
- */
- if (!sbi->parent || strcmp(sbi->parent->name, "io-unit")) {
- printk("%s: Error, parent is not io-unit.\n", sbi->full_name);
- goto err_out;
- }
- io_unit = sbi->parent;
- board = of_getintprop_default(io_unit, "board#", -1);
- if (board == -1) {
- printk("%s: Error, lacks board# property.\n", io_unit->full_name);
- goto err_out;
- }
-
- sbusl = pil_to_sbus[real_irq];
- if (sbusl)
- pil = sun4d_encode_irq(board, sbusl, slot);
- else
- pil = real_irq;
irq = irq_alloc(real_irq, pil);
- if (irq == 0)
+ if (irq == 0) {
+ prom_printf("IRQ: allocate for %d %d %d failed\n",
+ real_irq, pil, board);
goto err_out;
+ }
handler_data = irq_get_handler_data(irq);
if (unlikely(handler_data))
@@ -368,9 +325,80 @@
irq_set_handler_data(irq, handler_data);
err_out:
- return real_irq;
+ return irq;
}
+
+
+unsigned int sun4d_build_device_irq(struct platform_device *op,
+ unsigned int real_irq)
+{
+ struct device_node *dp = op->dev.of_node;
+ struct device_node *board_parent, *bus = dp->parent;
+ char *bus_connection;
+ const struct linux_prom_registers *regs;
+ unsigned int pil;
+ unsigned int irq;
+ int board, slot;
+ int sbusl;
+
+ irq = real_irq;
+ while (bus) {
+ if (!strcmp(bus->name, "sbi")) {
+ bus_connection = "io-unit";
+ break;
+ }
+
+ if (!strcmp(bus->name, "bootbus")) {
+ bus_connection = "cpu-unit";
+ break;
+ }
+
+ bus = bus->parent;
+ }
+ if (!bus)
+ goto err_out;
+
+ regs = of_get_property(dp, "reg", NULL);
+ if (!regs)
+ goto err_out;
+
+ slot = regs->which_io;
+
+ /*
+ * If Bus nodes parent is not io-unit/cpu-unit or the io-unit/cpu-unit
+ * lacks a "board#" property, something is very wrong.
+ */
+ if (!bus->parent || strcmp(bus->parent->name, bus_connection)) {
+ printk(KERN_ERR "%s: Error, parent is not %s.\n",
+ bus->full_name, bus_connection);
+ goto err_out;
+ }
+ board_parent = bus->parent;
+ board = of_getintprop_default(board_parent, "board#", -1);
+ if (board == -1) {
+ printk(KERN_ERR "%s: Error, lacks board# property.\n",
+ board_parent->full_name);
+ goto err_out;
+ }
+
+ sbusl = pil_to_sbus[real_irq];
+ if (sbusl)
+ pil = sun4d_encode_irq(board, sbusl, slot);
+ else
+ pil = real_irq;
+
+ irq = _sun4d_build_device_irq(real_irq, pil, board);
+err_out:
+ return irq;
+}
+
+unsigned int sun4d_build_timer_irq(unsigned int board, unsigned int real_irq)
+{
+ return _sun4d_build_device_irq(real_irq, real_irq, board);
+}
+
+
static void __init sun4d_fixup_trap_table(void)
{
#ifdef CONFIG_SMP
@@ -402,6 +430,7 @@
unsigned int irq;
const u32 *reg;
int err;
+ int board;
dp = of_find_node_by_name(NULL, "cpu-unit");
if (!dp) {
@@ -414,12 +443,19 @@
* bootbus.
*/
reg = of_get_property(dp, "reg", NULL);
- of_node_put(dp);
if (!reg) {
prom_printf("sun4d_init_timers: No reg property\n");
prom_halt();
}
+ board = of_getintprop_default(dp, "board#", -1);
+ if (board == -1) {
+ prom_printf("sun4d_init_timers: No board# property on cpu-unit\n");
+ prom_halt();
+ }
+
+ of_node_put(dp);
+
res.start = reg[1];
res.end = reg[2] - 1;
res.flags = reg[0] & 0xff;
@@ -434,7 +470,7 @@
master_l10_counter = &sun4d_timers->l10_cur_count;
- irq = sun4d_build_device_irq(NULL, SUN4D_TIMER_IRQ);
+ irq = sun4d_build_timer_irq(board, SUN4D_TIMER_IRQ);
err = request_irq(irq, counter_fn, IRQF_TIMER, "timer", NULL);
if (err) {
prom_printf("sun4d_init_timers: request_irq() failed with %d\n",
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index 6db18c6..170cd8e 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -109,7 +109,7 @@
default:
return -ENOSYS;
- };
+ }
return -ENOSYS;
}
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 96082d3..908b47a 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -460,7 +460,7 @@
default:
err = -ENOSYS;
goto out;
- };
+ }
}
if (call <= MSGCTL) {
switch (call) {
@@ -481,7 +481,7 @@
default:
err = -ENOSYS;
goto out;
- };
+ }
}
if (call <= SHMCTL) {
switch (call) {
@@ -507,7 +507,7 @@
default:
err = -ENOSYS;
goto out;
- };
+ }
} else {
err = -ENOSYS;
}
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 2b8d54b..1db6b18 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -708,7 +708,7 @@
case CLOCK_EVT_MODE_UNUSED:
WARN_ON(1);
break;
- };
+ }
}
static struct clock_event_device sparc64_clockevent = {
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 1ed547b..0cbdaa4 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -1804,7 +1804,7 @@
return "warning resumable";
default:
return "unknown";
- };
+ }
}
static void sun4v_log_error(struct pt_regs *regs, struct sun4v_error_entry *ent, int cpu, const char *pfx, atomic_t *ocnt)
diff --git a/arch/sparc/kernel/unaligned_64.c b/arch/sparc/kernel/unaligned_64.c
index c752c4c..b2b019e 100644
--- a/arch/sparc/kernel/unaligned_64.c
+++ b/arch/sparc/kernel/unaligned_64.c
@@ -211,7 +211,7 @@
default:
BUG();
break;
- };
+ }
}
return __do_int_store(dst_addr, size, src_val, asi);
}
@@ -328,7 +328,7 @@
case ASI_SNFL:
asi &= ~0x08;
break;
- };
+ }
switch (dir) {
case load:
reg_addr = fetch_reg_addr(((insn>>25)&0x1f), regs);
@@ -351,7 +351,7 @@
default:
BUG();
break;
- };
+ }
*reg_addr = val_in;
}
break;
diff --git a/arch/sparc/kernel/us2e_cpufreq.c b/arch/sparc/kernel/us2e_cpufreq.c
index 531d54f..489fc15 100644
--- a/arch/sparc/kernel/us2e_cpufreq.c
+++ b/arch/sparc/kernel/us2e_cpufreq.c
@@ -176,7 +176,7 @@
default:
BUG();
- };
+ }
}
static unsigned long index_to_divisor(unsigned int index)
@@ -199,7 +199,7 @@
default:
BUG();
- };
+ }
}
static unsigned long estar_to_divisor(unsigned long estar)
@@ -224,7 +224,7 @@
break;
default:
BUG();
- };
+ }
return ret;
}
diff --git a/arch/sparc/kernel/us3_cpufreq.c b/arch/sparc/kernel/us3_cpufreq.c
index 9a8ceb7..eb1624b 100644
--- a/arch/sparc/kernel/us3_cpufreq.c
+++ b/arch/sparc/kernel/us3_cpufreq.c
@@ -71,7 +71,7 @@
break;
default:
BUG();
- };
+ }
return ret;
}
@@ -125,7 +125,7 @@
default:
BUG();
- };
+ }
reg = read_safari_cfg();
diff --git a/arch/sparc/kernel/viohs.c b/arch/sparc/kernel/viohs.c
index aa6ac70..29348ea 100644
--- a/arch/sparc/kernel/viohs.c
+++ b/arch/sparc/kernel/viohs.c
@@ -363,7 +363,7 @@
default:
return handshake_failure(vio);
- };
+ }
}
static int process_attr(struct vio_driver_state *vio, void *pkt)
diff --git a/arch/sparc/kernel/visemul.c b/arch/sparc/kernel/visemul.c
index 9dfd2eb..3635771 100644
--- a/arch/sparc/kernel/visemul.c
+++ b/arch/sparc/kernel/visemul.c
@@ -334,7 +334,7 @@
left = edge32_tab_l[(rs1 >> 2) & 0x1].left;
right = edge32_tab_l[(rs2 >> 2) & 0x1].right;
break;
- };
+ }
if ((rs1 & ~0x7UL) == (rs2 & ~0x7UL))
rd_val = right & left;
@@ -360,7 +360,7 @@
tstate = regs->tstate & ~(TSTATE_XCC | TSTATE_ICC);
regs->tstate = tstate | (ccr << 32UL);
}
- };
+ }
}
static void array(struct pt_regs *regs, unsigned int insn, unsigned int opf)
@@ -392,7 +392,7 @@
case ARRAY32_OPF:
rd_val <<= 2;
- };
+ }
store_reg(regs, rd_val, RD(insn));
}
@@ -577,7 +577,7 @@
*fpd_regaddr(f, RD(insn)) = rd_val;
break;
}
- };
+ }
}
static void pmul(struct pt_regs *regs, unsigned int insn, unsigned int opf)
@@ -693,7 +693,7 @@
*fpd_regaddr(f, RD(insn)) = rd_val;
break;
}
- };
+ }
}
static void pcmp(struct pt_regs *regs, unsigned int insn, unsigned int opf)
@@ -786,7 +786,7 @@
rd_val |= 1 << i;
}
break;
- };
+ }
maybe_flush_windows(0, 0, RD(insn), 0);
store_reg(regs, rd_val, RD(insn));
@@ -885,7 +885,7 @@
case BSHUFFLE_OPF:
bshuffle(regs, insn);
break;
- };
+ }
regs->tpc = regs->tnpc;
regs->tnpc += 4;
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index b10ac4d..7543ddb 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -135,7 +135,7 @@
default:
break;
- };
+ }
memset(®s, 0, sizeof (regs));
regs.pc = pc;
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index ca21732..7b00de6 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -340,7 +340,7 @@
prom_printf("paging_init: sparc_cpu_model = %d\n", sparc_cpu_model);
prom_printf("paging_init: Halting...\n");
prom_halt();
- };
+ }
/* Initialize the protection map with non-constant, MMU dependent values. */
protection_map[0] = PAGE_NONE;
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index e10cd03..3fd8e18 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -1625,7 +1625,7 @@
ktsb_descr[0].pgsz_idx = HV_PGSZ_IDX_4MB;
ktsb_descr[0].pgsz_mask = HV_PGSZ_MASK_4MB;
break;
- };
+ }
ktsb_descr[0].assoc = 1;
ktsb_descr[0].num_ttes = KERNEL_TSB_NENTRIES;
@@ -2266,7 +2266,7 @@
return _PAGE_SZ512K_4V;
case 4 * 1024 * 1024:
return _PAGE_SZ4MB_4V;
- };
+ }
} else {
switch (sz) {
case 8 * 1024:
@@ -2278,7 +2278,7 @@
return _PAGE_SZ512K_4U;
case 4 * 1024 * 1024:
return _PAGE_SZ4MB_4U;
- };
+ }
}
}
diff --git a/arch/sparc/mm/leon_mm.c b/arch/sparc/mm/leon_mm.c
index c0e0129..e485a68 100644
--- a/arch/sparc/mm/leon_mm.c
+++ b/arch/sparc/mm/leon_mm.c
@@ -226,7 +226,7 @@
* Leon2 and Leon3 differ in their way of telling cache information
*
*/
-int leon_flush_needed(void)
+int __init leon_flush_needed(void)
{
int flush_needed = -1;
unsigned int ssize, sets;
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index fe09fd8..cbef74e 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -1665,7 +1665,7 @@
default:
srmmu_modtype = Swift_ok;
break;
- };
+ }
BTFIXUPSET_CALL(flush_cache_all, swift_flush_cache_all, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(flush_cache_mm, swift_flush_cache_mm, BTFIXUPCALL_NORM);
@@ -2069,7 +2069,7 @@
/* Some other Cypress revision, assume a 605. */
init_cypress_605(mod_rev);
break;
- };
+ }
return;
}
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index a2350b5..1cf4f19 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -318,7 +318,7 @@
prom_printf("probe_vac: Didn't expect vac-linesize of %d, halting\n",
sun4c_vacinfo.linesize);
prom_halt();
- };
+ }
sun4c_flush_all();
sun4c_enable_vac();
@@ -364,7 +364,7 @@
prom_printf("Unhandled number of segmaps: %d\n",
num_segmaps);
prom_halt();
- };
+ }
switch (num_contexts) {
case 8:
/* Default, nothing to do. */
@@ -377,7 +377,7 @@
prom_printf("Unhandled number of contexts: %d\n",
num_contexts);
prom_halt();
- };
+ }
if (sun4c_vacinfo.do_hwflushes != 0) {
PATCH_INSN(vac_hwflush_patch1_on, vac_hwflush_patch1);
@@ -394,7 +394,7 @@
prom_printf("Impossible VAC linesize %d, halting...\n",
sun4c_vacinfo.linesize);
prom_halt();
- };
+ }
}
}
diff --git a/arch/sparc/mm/tsb.c b/arch/sparc/mm/tsb.c
index 9484615..a5f51b2 100644
--- a/arch/sparc/mm/tsb.c
+++ b/arch/sparc/mm/tsb.c
@@ -180,7 +180,7 @@
printk(KERN_ERR "TSB[%s:%d]: Impossible TSB size %lu, killing process.\n",
current->comm, current->pid, tsb_bytes);
do_exit(SIGSEGV);
- };
+ }
tte |= pte_sz_bits(page_sz);
if (tlb_type == cheetah_plus || tlb_type == hypervisor) {
@@ -215,7 +215,7 @@
#endif
default:
BUG();
- };
+ }
hp->assoc = 1;
hp->num_ttes = tsb_bytes / 16;
hp->ctx_idx = 0;
@@ -230,7 +230,7 @@
#endif
default:
BUG();
- };
+ }
hp->tsb_base = tsb_paddr;
hp->resv = 0;
}
diff --git a/arch/sparc/prom/console_32.c b/arch/sparc/prom/console_32.c
index b05e3db..a00f47b 100644
--- a/arch/sparc/prom/console_32.c
+++ b/arch/sparc/prom/console_32.c
@@ -38,7 +38,7 @@
break;
default:
break;
- };
+ }
restore_current();
spin_unlock_irqrestore(&prom_lock, flags);
return i; /* Ugh, we could spin forever on unsupported proms ;( */
diff --git a/arch/sparc/prom/init_32.c b/arch/sparc/prom/init_32.c
index 0a601b3..26c64ce 100644
--- a/arch/sparc/prom/init_32.c
+++ b/arch/sparc/prom/init_32.c
@@ -53,7 +53,7 @@
romvec->pv_romvers);
prom_halt();
break;
- };
+ }
prom_rev = romvec->pv_plugin_revision;
prom_prev = romvec->pv_printrev;
diff --git a/arch/sparc/prom/mp.c b/arch/sparc/prom/mp.c
index 97c44c9..0da8256 100644
--- a/arch/sparc/prom/mp.c
+++ b/arch/sparc/prom/mp.c
@@ -35,7 +35,7 @@
case PROM_V3:
ret = (*(romvec->v3_cpustart))(cpunode, (int) ctable_reg, ctx, pc);
break;
- };
+ }
restore_current();
spin_unlock_irqrestore(&prom_lock, flags);
diff --git a/arch/tile/include/asm/mmzone.h b/arch/tile/include/asm/mmzone.h
index c6344c4..9d3dbce 100644
--- a/arch/tile/include/asm/mmzone.h
+++ b/arch/tile/include/asm/mmzone.h
@@ -40,17 +40,6 @@
return highbits_to_node[__pfn_to_highbits(pfn)];
}
-/*
- * Following are macros that each numa implmentation must define.
- */
-
-#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid) \
-({ \
- pg_data_t *__pgdat = NODE_DATA(nid); \
- __pgdat->node_start_pfn + __pgdat->node_spanned_pages; \
-})
-
#define kern_addr_valid(kaddr) virt_addr_valid((void *)kaddr)
static inline int pfn_valid(int pfn)
diff --git a/arch/um/include/asm/percpu.h b/arch/um/include/asm/percpu.h
new file mode 100644
index 0000000..efe7508
--- /dev/null
+++ b/arch/um/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __UM_PERCPU_H
+#define __UM_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* __UM_PERCPU_H */
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index d3a3032..e57dcce 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -231,10 +231,6 @@
help
Enable support for NB0916 PWM controllers
-config PUV3_RTC
- tristate "PKUnity v3 RTC Support"
- depends on !ARCH_FPGA
-
if PUV3_NB0916
menu "PKUnity NetBook-0916 Features"
diff --git a/arch/unicore32/Makefile b/arch/unicore32/Makefile
index 76a8bee..6af4bc4 100644
--- a/arch/unicore32/Makefile
+++ b/arch/unicore32/Makefile
@@ -40,42 +40,10 @@
libs-y += arch/unicore32/lib/
-ASM_GENERATED_DIR := $(srctree)/arch/unicore32/include/generated
-LINUXINCLUDE += -I$(ASM_GENERATED_DIR)
-
-ASM_GENERIC_HEADERS := atomic.h auxvec.h
-ASM_GENERIC_HEADERS += bitsperlong.h bug.h bugs.h
-ASM_GENERIC_HEADERS += cputime.h current.h
-ASM_GENERIC_HEADERS += device.h div64.h
-ASM_GENERIC_HEADERS += emergency-restart.h errno.h
-ASM_GENERIC_HEADERS += fb.h fcntl.h ftrace.h futex.h
-ASM_GENERIC_HEADERS += hardirq.h hw_irq.h
-ASM_GENERIC_HEADERS += ioctl.h ioctls.h ipcbuf.h irq_regs.h
-ASM_GENERIC_HEADERS += kdebug.h kmap_types.h
-ASM_GENERIC_HEADERS += local.h
-ASM_GENERIC_HEADERS += mman.h module.h msgbuf.h
-ASM_GENERIC_HEADERS += param.h parport.h percpu.h poll.h posix_types.h
-ASM_GENERIC_HEADERS += resource.h
-ASM_GENERIC_HEADERS += scatterlist.h sections.h segment.h sembuf.h serial.h
-ASM_GENERIC_HEADERS += setup.h shmbuf.h shmparam.h
-ASM_GENERIC_HEADERS += siginfo.h signal.h sizes.h
-ASM_GENERIC_HEADERS += socket.h sockios.h stat.h statfs.h swab.h syscalls.h
-ASM_GENERIC_HEADERS += termbits.h termios.h topology.h types.h
-ASM_GENERIC_HEADERS += ucontext.h unaligned.h user.h
-ASM_GENERIC_HEADERS += vga.h
-ASM_GENERIC_HEADERS += xor.h
-
-archprepare:
-ifneq ($(ASM_GENERATED_DIR), $(wildcard $(ASM_GENERATED_DIR)))
- $(Q)mkdir -p $(ASM_GENERATED_DIR)/asm
- $(Q)$(foreach a, $(ASM_GENERIC_HEADERS), \
- echo '#include <asm-generic/$a>' \
- > $(ASM_GENERATED_DIR)/asm/$a; )
-endif
-
boot := arch/unicore32/boot
-# Default target when executing plain make
+# Default defconfig and target when executing plain make
+KBUILD_DEFCONFIG := $(ARCH)_defconfig
KBUILD_IMAGE := zImage
all: $(KBUILD_IMAGE)
@@ -83,8 +51,6 @@
zImage Image uImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-MRPROPER_DIRS += $(ASM_GENERATED_DIR)
-
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
diff --git a/arch/unicore32/boot/compressed/Makefile b/arch/unicore32/boot/compressed/Makefile
index 9537342..b0954a2 100644
--- a/arch/unicore32/boot/compressed/Makefile
+++ b/arch/unicore32/boot/compressed/Makefile
@@ -59,7 +59,7 @@
# We now have a PIC decompressor implementation. Decompressors running
# from RAM should not define ZTEXTADDR. Decompressors running directly
# from ROM or Flash must define ZTEXTADDR (preferably via the config)
-ZTEXTADDR := 0
+ZTEXTADDR := 0x03000000
ZBSSADDR := ALIGN(4)
SEDFLAGS_lds = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
diff --git a/arch/unicore32/configs/debug_defconfig b/arch/unicore32/configs/unicore32_defconfig
similarity index 97%
rename from arch/unicore32/configs/debug_defconfig
rename to arch/unicore32/configs/unicore32_defconfig
index b5fbde9..c9dd319 100644
--- a/arch/unicore32/configs/debug_defconfig
+++ b/arch/unicore32/configs/unicore32_defconfig
@@ -1,6 +1,6 @@
### General setup
CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-debug"
+CONFIG_LOCALVERSION="-unicore32"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -64,7 +64,6 @@
CONFIG_I2C_EEPROM_AT24=n
CONFIG_LCD_BACKLIGHT=n
-CONFIG_PUV3_RTC=y
CONFIG_PUV3_UMAL=y
CONFIG_PUV3_MUSB=n
CONFIG_PUV3_AC97=n
@@ -167,8 +166,9 @@
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# Real Time Clock
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PUV3=y
### File systems
CONFIG_EXT2_FS=m
diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild
index b200fda..ca113d6 100644
--- a/arch/unicore32/include/asm/Kbuild
+++ b/arch/unicore32/include/asm/Kbuild
@@ -1,2 +1,61 @@
include include/asm-generic/Kbuild.asm
+generic-y += atomic.h
+generic-y += auxvec.h
+generic-y += bitsperlong.h
+generic-y += bug.h
+generic-y += bugs.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += device.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += fb.h
+generic-y += fcntl.h
+generic-y += ftrace.h
+generic-y += futex.h
+generic-y += hardirq.h
+generic-y += hw_irq.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += local.h
+generic-y += mman.h
+generic-y += module.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += segment.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += setup.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += siginfo.h
+generic-y += signal.h
+generic-y += sizes.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += swab.h
+generic-y += syscalls.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += topology.h
+generic-y += types.h
+generic-y += ucontext.h
+generic-y += unaligned.h
+generic-y += user.h
+generic-y += vga.h
+generic-y += xor.h
diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile
index ec23a2f..aeb0f18 100644
--- a/arch/unicore32/kernel/Makefile
+++ b/arch/unicore32/kernel/Makefile
@@ -16,7 +16,6 @@
obj-$(CONFIG_ARCH_PUV3) += clock.o irq.o time.o
obj-$(CONFIG_PUV3_GPIO) += gpio.o
-obj-$(CONFIG_PUV3_RTC) += rtc.o
obj-$(CONFIG_PUV3_PWM) += pwm.o
obj-$(CONFIG_PUV3_PM) += pm.o sleep.o
obj-$(CONFIG_HIBERNATION) += hibernate.o hibernate_asm.o
diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S
index 9bf7f7a..77e407e 100644
--- a/arch/unicore32/kernel/vmlinux.lds.S
+++ b/arch/unicore32/kernel/vmlinux.lds.S
@@ -30,7 +30,7 @@
HEAD_TEXT_SECTION
INIT_TEXT_SECTION(PAGE_SIZE)
INIT_DATA_SECTION(16)
- PERCPU(L1_CACHE_BYTES, PAGE_SIZE)
+ PERCPU_SECTION(L1_CACHE_BYTES)
__init_end = .;
_stext = .;
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index da34972..37357a5 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1170,7 +1170,7 @@
config AMD_NUMA
def_bool y
prompt "Old style AMD Opteron NUMA detection"
- depends on NUMA && PCI
+ depends on X86_64 && NUMA && PCI
---help---
Enable AMD NUMA node topology detection. You should say Y here if
you have a multi processor AMD system. This uses an old method to
diff --git a/arch/x86/include/asm/apb_timer.h b/arch/x86/include/asm/apb_timer.h
index 2fefa50..af60d8a 100644
--- a/arch/x86/include/asm/apb_timer.h
+++ b/arch/x86/include/asm/apb_timer.h
@@ -62,7 +62,7 @@
#else /* CONFIG_APB_TIMER */
static inline unsigned long apbt_quick_calibrate(void) {return 0; }
-static inline void apbt_time_init(void) {return 0; }
+static inline void apbt_time_init(void) { }
#endif
#endif /* ASM_X86_APBT_H */
diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h
index 19ae14b..0cd3800 100644
--- a/arch/x86/include/asm/memblock.h
+++ b/arch/x86/include/asm/memblock.h
@@ -4,7 +4,6 @@
#define ARCH_DISCARD_MEMBLOCK
u64 memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align);
-void memblock_x86_to_bootmem(u64 start, u64 end);
void memblock_x86_reserve_range(u64 start, u64 end, char *name);
void memblock_x86_free_range(u64 start, u64 end);
@@ -19,5 +18,6 @@
u64 memblock_x86_find_in_range_node(int nid, u64 start, u64 end, u64 size, u64 align);
u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit);
u64 memblock_x86_memory_in_range(u64 addr, u64 limit);
+bool memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align);
#endif
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index 5e83a41..ffa037f 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -48,17 +48,6 @@
#endif
}
-/*
- * Following are macros that each numa implmentation must define.
- */
-
-#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid) \
-({ \
- pg_data_t *__pgdat = NODE_DATA(nid); \
- __pgdat->node_start_pfn + __pgdat->node_spanned_pages; \
-})
-
static inline int pfn_valid(int pfn)
{
int nid = pfn_to_nid(pfn);
@@ -68,6 +57,8 @@
return 0;
}
+#define early_pfn_valid(pfn) pfn_valid((pfn))
+
#endif /* CONFIG_DISCONTIGMEM */
#ifdef CONFIG_NEED_MULTIPLE_NODES
diff --git a/arch/x86/include/asm/mmzone_64.h b/arch/x86/include/asm/mmzone_64.h
index b3f88d7..129d9aa 100644
--- a/arch/x86/include/asm/mmzone_64.h
+++ b/arch/x86/include/asm/mmzone_64.h
@@ -13,8 +13,5 @@
#define NODE_DATA(nid) (node_data[nid])
-#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \
- NODE_DATA(nid)->node_spanned_pages)
#endif
#endif /* _ASM_X86_MMZONE_64_H */
diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
index 31d84ac..a518c0a 100644
--- a/arch/x86/include/asm/pvclock.h
+++ b/arch/x86/include/asm/pvclock.h
@@ -22,6 +22,8 @@
u64 product;
#ifdef __i386__
u32 tmp1, tmp2;
+#else
+ ulong tmp;
#endif
if (shift < 0)
@@ -42,8 +44,11 @@
: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
#elif defined(__x86_64__)
__asm__ (
- "mul %%rdx ; shrd $32,%%rdx,%%rax"
- : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
+ "mul %[mul_frac] ; shrd $32, %[hi], %[lo]"
+ : [lo]"=a"(product),
+ [hi]"=d"(tmp)
+ : "0"(delta),
+ [mul_frac]"rm"((u64)mul_frac));
#else
#error implement me!
#endif
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S
index ead21b6..b4fd836 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.S
@@ -28,6 +28,8 @@
pmode_cr4: .long 0 /* Saved %cr4 */
pmode_efer: .quad 0 /* Saved EFER */
pmode_gdt: .quad 0
+pmode_misc_en: .quad 0 /* Saved MISC_ENABLE MSR */
+pmode_behavior: .long 0 /* Wakeup behavior flags */
realmode_flags: .long 0
real_magic: .long 0
trampoline_segment: .word 0
@@ -91,6 +93,18 @@
/* Call the C code */
calll main
+ /* Restore MISC_ENABLE before entering protected mode, in case
+ BIOS decided to clear XD_DISABLE during S3. */
+ movl pmode_behavior, %eax
+ btl $WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %eax
+ jnc 1f
+
+ movl pmode_misc_en, %eax
+ movl pmode_misc_en + 4, %edx
+ movl $MSR_IA32_MISC_ENABLE, %ecx
+ wrmsr
+1:
+
/* Do any other stuff... */
#ifndef CONFIG_64BIT
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h
index e1828c0..97a29e1 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.h
+++ b/arch/x86/kernel/acpi/realmode/wakeup.h
@@ -21,6 +21,9 @@
u32 pmode_efer_low; /* Protected mode EFER */
u32 pmode_efer_high;
u64 pmode_gdt;
+ u32 pmode_misc_en_low; /* Protected mode MISC_ENABLE */
+ u32 pmode_misc_en_high;
+ u32 pmode_behavior; /* Wakeup routine behavior flags */
u32 realmode_flags;
u32 real_magic;
u16 trampoline_segment; /* segment with trampoline code, 64-bit only */
@@ -39,4 +42,7 @@
#define WAKEUP_HEADER_SIGNATURE 0x51ee1111
#define WAKEUP_END_SIGNATURE 0x65a22c82
+/* Wakeup behavior bits */
+#define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE 0
+
#endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 18a857b..103b6ab 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -77,6 +77,12 @@
header->pmode_cr0 = read_cr0();
header->pmode_cr4 = read_cr4_safe();
+ header->pmode_behavior = 0;
+ if (!rdmsr_safe(MSR_IA32_MISC_ENABLE,
+ &header->pmode_misc_en_low,
+ &header->pmode_misc_en_high))
+ header->pmode_behavior |=
+ (1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE);
header->realmode_flags = acpi_realmode_flags;
header->real_magic = 0x12345678;
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index cd8cbeb..7c3a95e 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -30,6 +30,7 @@
#include <asm/proto.h>
#include <asm/iommu.h>
#include <asm/gart.h>
+#include <asm/dma.h>
#include <asm/amd_iommu_proto.h>
#include <asm/amd_iommu_types.h>
#include <asm/amd_iommu.h>
@@ -154,6 +155,10 @@
pdev = pci_get_bus_and_slot(PCI_BUS(alias), alias & 0xff);
if (pdev)
dev_data->alias = &pdev->dev;
+ else {
+ kfree(dev_data);
+ return -ENOTSUPP;
+ }
atomic_set(&dev_data->bind, 0);
@@ -163,6 +168,20 @@
return 0;
}
+static void iommu_ignore_device(struct device *dev)
+{
+ u16 devid, alias;
+
+ devid = get_device_id(dev);
+ alias = amd_iommu_alias_table[devid];
+
+ memset(&amd_iommu_dev_table[devid], 0, sizeof(struct dev_table_entry));
+ memset(&amd_iommu_dev_table[alias], 0, sizeof(struct dev_table_entry));
+
+ amd_iommu_rlookup_table[devid] = NULL;
+ amd_iommu_rlookup_table[alias] = NULL;
+}
+
static void iommu_uninit_device(struct device *dev)
{
kfree(dev->archdata.iommu);
@@ -192,7 +211,9 @@
continue;
ret = iommu_init_device(&pdev->dev);
- if (ret)
+ if (ret == -ENOTSUPP)
+ iommu_ignore_device(&pdev->dev);
+ else if (ret)
goto out_free;
}
@@ -2383,6 +2404,23 @@
.dma_supported = amd_iommu_dma_supported,
};
+static unsigned device_dma_ops_init(void)
+{
+ struct pci_dev *pdev = NULL;
+ unsigned unhandled = 0;
+
+ for_each_pci_dev(pdev) {
+ if (!check_device(&pdev->dev)) {
+ unhandled += 1;
+ continue;
+ }
+
+ pdev->dev.archdata.dma_ops = &amd_iommu_dma_ops;
+ }
+
+ return unhandled;
+}
+
/*
* The function which clues the AMD IOMMU driver into dma_ops.
*/
@@ -2395,7 +2433,7 @@
int __init amd_iommu_init_dma_ops(void)
{
struct amd_iommu *iommu;
- int ret;
+ int ret, unhandled;
/*
* first allocate a default protection domain for every IOMMU we
@@ -2421,7 +2459,11 @@
swiotlb = 0;
/* Make the driver finally visible to the drivers */
- dma_ops = &amd_iommu_dma_ops;
+ unhandled = device_dma_ops_init();
+ if (unhandled && max_pfn > MAX_DMA32_PFN) {
+ /* There are unhandled devices - initialize swiotlb for them */
+ swiotlb = 1;
+ }
amd_iommu_stats_init();
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 9179c21..bfc8453 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -731,8 +731,8 @@
{
u8 *p = (u8 *)h;
u8 *end = p, flags = 0;
- u16 dev_i, devid = 0, devid_start = 0, devid_to = 0;
- u32 ext_flags = 0;
+ u16 devid = 0, devid_start = 0, devid_to = 0;
+ u32 dev_i, ext_flags = 0;
bool alias = false;
struct ivhd_entry *e;
@@ -887,7 +887,7 @@
/* Initializes the device->iommu mapping for the driver */
static int __init init_iommu_devices(struct amd_iommu *iommu)
{
- u16 i;
+ u32 i;
for (i = iommu->first_device; i <= iommu->last_device; ++i)
set_iommu_for_device(iommu, i);
@@ -1177,7 +1177,7 @@
*/
static void init_device_table(void)
{
- u16 devid;
+ u32 devid;
for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
set_dev_entry_bit(devid, DEV_ENTRY_VALID);
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index b961af8..b9338b8 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -390,7 +390,8 @@
/*
* If mask=1, the LVT entry does not generate interrupts while mask=0
- * enables the vector. See also the BKDGs.
+ * enables the vector. See also the BKDGs. Must be called with
+ * preemption disabled.
*/
int setup_APIC_eilvt(u8 offset, u8 vector, u8 msg_type, u8 mask)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index b511a01..adc66c3 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -632,14 +632,14 @@
/* Direct Legacy VGA I/O traffic to designated IOH */
int uv_set_vga_state(struct pci_dev *pdev, bool decode,
- unsigned int command_bits, bool change_bridge)
+ unsigned int command_bits, u32 flags)
{
int domain, bus, rc;
- PR_DEVEL("devfn %x decode %d cmd %x chg_brdg %d\n",
- pdev->devfn, decode, command_bits, change_bridge);
+ PR_DEVEL("devfn %x decode %d cmd %x flags %d\n",
+ pdev->devfn, decode, command_bits, flags);
- if (!change_bridge)
+ if (!(flags & PCI_VGA_STATE_CHANGE_BRIDGE))
return 0;
if ((command_bits & PCI_COMMAND_IO) == 0)
diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c
index 690bc84..9aeb78a 100644
--- a/arch/x86/kernel/devicetree.c
+++ b/arch/x86/kernel/devicetree.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/of_pci.h>
+#include <linux/initrd.h>
#include <asm/hpet.h>
#include <asm/irq_controller.h>
@@ -98,6 +99,16 @@
return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
}
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+ unsigned long end)
+{
+ initrd_start = (unsigned long)__va(start);
+ initrd_end = (unsigned long)__va(end);
+ initrd_below_start_ok = 1;
+}
+#endif
+
void __init add_dtb(u64 data)
{
initial_dtb = data + offsetof(struct setup_data, data);
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 2e4928d..e1ba8cb2 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -337,7 +337,7 @@
* Powermanagement idle function, if any..
*/
void (*pm_idle)(void);
-#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE)
+#ifdef CONFIG_APM_MODULE
EXPORT_SYMBOL(pm_idle);
#endif
@@ -399,7 +399,7 @@
cpu_relax();
}
}
-#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE)
+#ifdef CONFIG_APM_MODULE
EXPORT_SYMBOL(default_idle);
#endif
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 8d12878..a3d0dc5 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -245,7 +245,6 @@
{
set_user_gs(regs, 0);
regs->fs = 0;
- set_fs(USER_DS);
regs->ds = __USER_DS;
regs->es = __USER_DS;
regs->ss = __USER_DS;
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 6c9dd92..ca6f7ab 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -338,7 +338,6 @@
regs->cs = _cs;
regs->ss = _ss;
regs->flags = X86_EFLAGS_IF;
- set_fs(USER_DS);
/*
* Free the old FP and other extended state
*/
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 0c016f7..9242436 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -294,6 +294,14 @@
DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"),
},
},
+ { /* Handle reboot issue on Acer Aspire one */
+ .callback = set_bios_reboot,
+ .ident = "Acer Aspire One A110",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"),
+ },
+ },
{ }
};
@@ -411,6 +419,30 @@
DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"),
},
},
+ { /* Handle problems with rebooting on the Latitude E6320. */
+ .callback = set_pci_reboot,
+ .ident = "Dell Latitude E6320",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"),
+ },
+ },
+ { /* Handle problems with rebooting on the Latitude E5420. */
+ .callback = set_pci_reboot,
+ .ident = "Dell Latitude E5420",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5420"),
+ },
+ },
+ { /* Handle problems with rebooting on the Latitude E6420. */
+ .callback = set_pci_reboot,
+ .ident = "Dell Latitude E6420",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"),
+ },
+ },
{ }
};
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 33a0c11..9fd3137 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -285,6 +285,19 @@
per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
x86_platform.nmi_init();
+ /*
+ * Wait until the cpu which brought this one up marked it
+ * online before enabling interrupts. If we don't do that then
+ * we can end up waking up the softirq thread before this cpu
+ * reached the active state, which makes the scheduler unhappy
+ * and schedule the softirq thread on the wrong cpu. This is
+ * only observable with forced threaded interrupts, but in
+ * theory it could also happen w/o them. It's just way harder
+ * to achieve.
+ */
+ while (!cpumask_test_cpu(smp_processor_id(), cpu_active_mask))
+ cpu_relax();
+
/* enable local interrupts */
local_irq_enable();
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index d6e2477..adc9867 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -47,38 +47,40 @@
#define DstDI (5<<1) /* Destination is in ES:(E)DI */
#define DstMem64 (6<<1) /* 64bit memory operand */
#define DstImmUByte (7<<1) /* 8-bit unsigned immediate operand */
-#define DstMask (7<<1)
+#define DstDX (8<<1) /* Destination is in DX register */
+#define DstMask (0xf<<1)
/* Source operand type. */
-#define SrcNone (0<<4) /* No source operand. */
-#define SrcReg (1<<4) /* Register operand. */
-#define SrcMem (2<<4) /* Memory operand. */
-#define SrcMem16 (3<<4) /* Memory operand (16-bit). */
-#define SrcMem32 (4<<4) /* Memory operand (32-bit). */
-#define SrcImm (5<<4) /* Immediate operand. */
-#define SrcImmByte (6<<4) /* 8-bit sign-extended immediate operand. */
-#define SrcOne (7<<4) /* Implied '1' */
-#define SrcImmUByte (8<<4) /* 8-bit unsigned immediate operand. */
-#define SrcImmU (9<<4) /* Immediate operand, unsigned */
-#define SrcSI (0xa<<4) /* Source is in the DS:RSI */
-#define SrcImmFAddr (0xb<<4) /* Source is immediate far address */
-#define SrcMemFAddr (0xc<<4) /* Source is far address in memory */
-#define SrcAcc (0xd<<4) /* Source Accumulator */
-#define SrcImmU16 (0xe<<4) /* Immediate operand, unsigned, 16 bits */
-#define SrcMask (0xf<<4)
+#define SrcNone (0<<5) /* No source operand. */
+#define SrcReg (1<<5) /* Register operand. */
+#define SrcMem (2<<5) /* Memory operand. */
+#define SrcMem16 (3<<5) /* Memory operand (16-bit). */
+#define SrcMem32 (4<<5) /* Memory operand (32-bit). */
+#define SrcImm (5<<5) /* Immediate operand. */
+#define SrcImmByte (6<<5) /* 8-bit sign-extended immediate operand. */
+#define SrcOne (7<<5) /* Implied '1' */
+#define SrcImmUByte (8<<5) /* 8-bit unsigned immediate operand. */
+#define SrcImmU (9<<5) /* Immediate operand, unsigned */
+#define SrcSI (0xa<<5) /* Source is in the DS:RSI */
+#define SrcImmFAddr (0xb<<5) /* Source is immediate far address */
+#define SrcMemFAddr (0xc<<5) /* Source is far address in memory */
+#define SrcAcc (0xd<<5) /* Source Accumulator */
+#define SrcImmU16 (0xe<<5) /* Immediate operand, unsigned, 16 bits */
+#define SrcDX (0xf<<5) /* Source is in DX register */
+#define SrcMask (0xf<<5)
/* Generic ModRM decode. */
-#define ModRM (1<<8)
+#define ModRM (1<<9)
/* Destination is only written; never read. */
-#define Mov (1<<9)
-#define BitOp (1<<10)
-#define MemAbs (1<<11) /* Memory operand is absolute displacement */
-#define String (1<<12) /* String instruction (rep capable) */
-#define Stack (1<<13) /* Stack instruction (push/pop) */
-#define GroupMask (7<<14) /* Opcode uses one of the group mechanisms */
-#define Group (1<<14) /* Bits 3:5 of modrm byte extend opcode */
-#define GroupDual (2<<14) /* Alternate decoding of mod == 3 */
-#define Prefix (3<<14) /* Instruction varies with 66/f2/f3 prefix */
-#define RMExt (4<<14) /* Opcode extension in ModRM r/m if mod == 3 */
-#define Sse (1<<17) /* SSE Vector instruction */
+#define Mov (1<<10)
+#define BitOp (1<<11)
+#define MemAbs (1<<12) /* Memory operand is absolute displacement */
+#define String (1<<13) /* String instruction (rep capable) */
+#define Stack (1<<14) /* Stack instruction (push/pop) */
+#define GroupMask (7<<15) /* Opcode uses one of the group mechanisms */
+#define Group (1<<15) /* Bits 3:5 of modrm byte extend opcode */
+#define GroupDual (2<<15) /* Alternate decoding of mod == 3 */
+#define Prefix (3<<15) /* Instruction varies with 66/f2/f3 prefix */
+#define RMExt (4<<15) /* Opcode extension in ModRM r/m if mod == 3 */
+#define Sse (1<<18) /* SSE Vector instruction */
/* Misc flags */
#define Prot (1<<21) /* instruction generates #UD if not in prot-mode */
#define VendorSpecific (1<<22) /* Vendor specific instruction */
@@ -3154,8 +3156,8 @@
I(DstReg | SrcMem | ModRM | Src2Imm, em_imul_3op),
I(SrcImmByte | Mov | Stack, em_push),
I(DstReg | SrcMem | ModRM | Src2ImmByte, em_imul_3op),
- D2bvIP(DstDI | Mov | String, ins, check_perm_in), /* insb, insw/insd */
- D2bvIP(SrcSI | ImplicitOps | String, outs, check_perm_out), /* outsb, outsw/outsd */
+ D2bvIP(DstDI | SrcDX | Mov | String, ins, check_perm_in), /* insb, insw/insd */
+ D2bvIP(SrcSI | DstDX | String, outs, check_perm_out), /* outsb, outsw/outsd */
/* 0x70 - 0x7F */
X16(D(SrcImmByte)),
/* 0x80 - 0x87 */
@@ -3212,8 +3214,8 @@
/* 0xE8 - 0xEF */
D(SrcImm | Stack), D(SrcImm | ImplicitOps),
D(SrcImmFAddr | No64), D(SrcImmByte | ImplicitOps),
- D2bvIP(SrcNone | DstAcc, in, check_perm_in),
- D2bvIP(SrcAcc | ImplicitOps, out, check_perm_out),
+ D2bvIP(SrcDX | DstAcc, in, check_perm_in),
+ D2bvIP(SrcAcc | DstDX, out, check_perm_out),
/* 0xF0 - 0xF7 */
N, DI(ImplicitOps, icebp), N, N,
DI(ImplicitOps | Priv, hlt), D(ImplicitOps),
@@ -3370,7 +3372,7 @@
int def_op_bytes, def_ad_bytes, goffset, simd_prefix;
bool op_prefix = false;
struct opcode opcode;
- struct operand memop = { .type = OP_NONE };
+ struct operand memop = { .type = OP_NONE }, *memopp = NULL;
c->eip = ctxt->eip;
c->fetch.start = c->eip;
@@ -3545,9 +3547,6 @@
if (memop.type == OP_MEM && c->ad_bytes != 8)
memop.addr.mem.ea = (u32)memop.addr.mem.ea;
- if (memop.type == OP_MEM && c->rip_relative)
- memop.addr.mem.ea += c->eip;
-
/*
* Decode and fetch the source operand: register, memory
* or immediate.
@@ -3569,6 +3568,7 @@
c->op_bytes;
srcmem_common:
c->src = memop;
+ memopp = &c->src;
break;
case SrcImmU16:
rc = decode_imm(ctxt, &c->src, 2, false);
@@ -3613,6 +3613,12 @@
memop.bytes = c->op_bytes + 2;
goto srcmem_common;
break;
+ case SrcDX:
+ c->src.type = OP_REG;
+ c->src.bytes = 2;
+ c->src.addr.reg = &c->regs[VCPU_REGS_RDX];
+ fetch_register_operand(&c->src);
+ break;
}
if (rc != X86EMUL_CONTINUE)
@@ -3659,6 +3665,7 @@
case DstMem:
case DstMem64:
c->dst = memop;
+ memopp = &c->dst;
if ((c->d & DstMask) == DstMem64)
c->dst.bytes = 8;
else
@@ -3682,14 +3689,23 @@
c->dst.addr.mem.seg = VCPU_SREG_ES;
c->dst.val = 0;
break;
+ case DstDX:
+ c->dst.type = OP_REG;
+ c->dst.bytes = 2;
+ c->dst.addr.reg = &c->regs[VCPU_REGS_RDX];
+ fetch_register_operand(&c->dst);
+ break;
case ImplicitOps:
/* Special instructions do their own operand decoding. */
default:
c->dst.type = OP_NONE; /* Disable writeback. */
- return 0;
+ break;
}
done:
+ if (memopp && memopp->type == OP_MEM && c->rip_relative)
+ memopp->addr.mem.ea += c->eip;
+
return (rc == X86EMUL_UNHANDLEABLE) ? EMULATION_FAILED : EMULATION_OK;
}
@@ -4027,7 +4043,6 @@
break;
case 0xec: /* in al,dx */
case 0xed: /* in (e/r)ax,dx */
- c->src.val = c->regs[VCPU_REGS_RDX];
do_io_in:
if (!pio_in_emulated(ctxt, ops, c->dst.bytes, c->src.val,
&c->dst.val))
@@ -4035,7 +4050,6 @@
break;
case 0xee: /* out dx,al */
case 0xef: /* out dx,(e/r)ax */
- c->dst.val = c->regs[VCPU_REGS_RDX];
do_io_out:
ops->pio_out_emulated(ctxt, c->src.bytes, c->dst.val,
&c->src.val, 1);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index bd14bb4..aee3862 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -565,7 +565,7 @@
static bool mapping_level_dirty_bitmap(struct kvm_vcpu *vcpu, gfn_t large_gfn)
{
- return gfn_to_memslot_dirty_bitmap(vcpu, large_gfn, true);
+ return !gfn_to_memslot_dirty_bitmap(vcpu, large_gfn, true);
}
static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn)
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 6c4dc01..9d03ad4 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -121,7 +121,7 @@
gva_t addr, u32 access)
{
pt_element_t pte;
- pt_element_t __user *ptep_user;
+ pt_element_t __user *uninitialized_var(ptep_user);
gfn_t table_gfn;
unsigned index, pt_access, uninitialized_var(pte_access);
gpa_t pte_gpa;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 4c3fa0f..d48ec60 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2047,7 +2047,8 @@
unsigned long cr0,
struct kvm_vcpu *vcpu)
{
- vmx_decache_cr3(vcpu);
+ if (!test_bit(VCPU_EXREG_CR3, (ulong *)&vcpu->arch.regs_avail))
+ vmx_decache_cr3(vcpu);
if (!(cr0 & X86_CR0_PG)) {
/* From paging/starting to nonpaging */
vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index d865c4a..bbaaa00 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -28,6 +28,7 @@
#include <linux/poison.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
+#include <linux/memory.h>
#include <linux/memory_hotplug.h>
#include <linux/nmi.h>
#include <linux/gfp.h>
@@ -895,8 +896,6 @@
}
#ifdef CONFIG_X86_UV
-#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS)
-
unsigned long memory_block_size_bytes(void)
{
if (is_uv_system()) {
diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c
index aa11693..992da5e 100644
--- a/arch/x86/mm/memblock.c
+++ b/arch/x86/mm/memblock.c
@@ -8,7 +8,7 @@
#include <linux/range.h>
/* Check for already reserved areas */
-static bool __init check_with_memblock_reserved_size(u64 *addrp, u64 *sizep, u64 align)
+bool __init memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align)
{
struct memblock_region *r;
u64 addr = *addrp, last;
@@ -59,7 +59,7 @@
if (addr >= ei_last)
continue;
*sizep = ei_last - addr;
- while (check_with_memblock_reserved_size(&addr, sizep, align))
+ while (memblock_x86_check_reserved_size(&addr, sizep, align))
;
if (*sizep)
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index cf97500..68894fd 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -112,8 +112,10 @@
static int nmi_start(void)
{
get_online_cpus();
- on_each_cpu(nmi_cpu_start, NULL, 1);
ctr_running = 1;
+ /* make ctr_running visible to the nmi handler: */
+ smp_mb();
+ on_each_cpu(nmi_cpu_start, NULL, 1);
put_online_cpus();
return 0;
}
@@ -504,15 +506,18 @@
nmi_enabled = 0;
ctr_running = 0;
- barrier();
+ /* make variables visible to the nmi handler: */
+ smp_mb();
err = register_die_notifier(&profile_exceptions_nb);
if (err)
goto fail;
get_online_cpus();
register_cpu_notifier(&oprofile_cpu_nb);
- on_each_cpu(nmi_cpu_setup, NULL, 1);
nmi_enabled = 1;
+ /* make nmi_enabled visible to the nmi handler: */
+ smp_mb();
+ on_each_cpu(nmi_cpu_setup, NULL, 1);
put_online_cpus();
return 0;
@@ -531,7 +536,8 @@
nmi_enabled = 0;
ctr_running = 0;
put_online_cpus();
- barrier();
+ /* make variables visible to the nmi handler: */
+ smp_mb();
unregister_die_notifier(&profile_exceptions_nb);
msrs = &get_cpu_var(cpu_msrs);
model->shutdown(msrs);
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 9fd8a56..9cbb710 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -609,16 +609,21 @@
return 0;
}
+/*
+ * This runs only on the current cpu. We try to find an LVT offset and
+ * setup the local APIC. For this we must disable preemption. On
+ * success we initialize all nodes with this offset. This updates then
+ * the offset in the IBS_CTL per-node msr. The per-core APIC setup of
+ * the IBS interrupt vector is called from op_amd_setup_ctrs()/op_-
+ * amd_cpu_shutdown() using the new offset.
+ */
static int force_ibs_eilvt_setup(void)
{
int offset;
int ret;
- /*
- * find the next free available EILVT entry, skip offset 0,
- * pin search to this cpu
- */
preempt_disable();
+ /* find the next free available EILVT entry, skip offset 0 */
for (offset = 1; offset < APIC_EILVT_NR_MAX; offset++) {
if (get_eilvt(offset))
break;
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 0972315..68c3c13 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -188,7 +188,7 @@
return false;
}
-static void coalesce_windows(struct pci_root_info *info, int type)
+static void coalesce_windows(struct pci_root_info *info, unsigned long type)
{
int i, j;
struct resource *res1, *res2;
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 8214724..f567965 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -327,7 +327,7 @@
}
#ifdef CONFIG_XEN_DOM0
-static int xen_register_pirq(u32 gsi, int triggering)
+static int xen_register_pirq(u32 gsi, int gsi_override, int triggering)
{
int rc, pirq, irq = -1;
struct physdev_map_pirq map_irq;
@@ -344,16 +344,18 @@
shareable = 1;
name = "ioapic-level";
}
-
pirq = xen_allocate_pirq_gsi(gsi);
if (pirq < 0)
goto out;
- irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name);
+ if (gsi_override >= 0)
+ irq = xen_bind_pirq_gsi_to_irq(gsi_override, pirq, shareable, name);
+ else
+ irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name);
if (irq < 0)
goto out;
- printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d\n", pirq, irq);
+ printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", pirq, irq, gsi);
map_irq.domid = DOMID_SELF;
map_irq.type = MAP_PIRQ_TYPE_GSI;
@@ -370,7 +372,7 @@
return irq;
}
-static int xen_register_gsi(u32 gsi, int triggering, int polarity)
+static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity)
{
int rc, irq;
struct physdev_setup_gsi setup_gsi;
@@ -381,7 +383,7 @@
printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
gsi, triggering, polarity);
- irq = xen_register_pirq(gsi, triggering);
+ irq = xen_register_pirq(gsi, gsi_override, triggering);
setup_gsi.gsi = gsi;
setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
@@ -403,6 +405,8 @@
int rc;
int trigger, polarity;
int gsi = acpi_sci_override_gsi;
+ int irq = -1;
+ int gsi_override = -1;
if (!gsi)
return;
@@ -419,7 +423,25 @@
printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d "
"polarity=%d\n", gsi, trigger, polarity);
- gsi = xen_register_gsi(gsi, trigger, polarity);
+ /* Before we bind the GSI to a Linux IRQ, check whether
+ * we need to override it with bus_irq (IRQ) value. Usually for
+ * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so:
+ * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
+ * but there are oddballs where the IRQ != GSI:
+ * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
+ * which ends up being: gsi_to_irq[9] == 20
+ * (which is what acpi_gsi_to_irq ends up calling when starting the
+ * the ACPI interpreter and keels over since IRQ 9 has not been
+ * setup as we had setup IRQ 20 for it).
+ */
+ /* Check whether the GSI != IRQ */
+ if (acpi_gsi_to_irq(gsi, &irq) == 0) {
+ if (irq >= 0 && irq != gsi)
+ /* Bugger, we MUST have that IRQ. */
+ gsi_override = irq;
+ }
+
+ gsi = xen_register_gsi(gsi, gsi_override, trigger, polarity);
printk(KERN_INFO "xen: acpi sci %d\n", gsi);
return;
@@ -428,7 +450,7 @@
static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
int trigger, int polarity)
{
- return xen_register_gsi(gsi, trigger, polarity);
+ return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity);
}
static int __init pci_xen_initial_domain(void)
@@ -467,7 +489,7 @@
if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
continue;
- xen_register_pirq(irq,
+ xen_register_pirq(irq, -1 /* no GSI override */,
trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE);
}
}
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 0d3a4fa..899e393 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -310,14 +310,31 @@
for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
efi_memory_desc_t *md = p;
- unsigned long long start = md->phys_addr;
- unsigned long long size = md->num_pages << EFI_PAGE_SHIFT;
+ u64 start = md->phys_addr;
+ u64 size = md->num_pages << EFI_PAGE_SHIFT;
if (md->type != EFI_BOOT_SERVICES_CODE &&
md->type != EFI_BOOT_SERVICES_DATA)
continue;
-
- memblock_x86_reserve_range(start, start + size, "EFI Boot");
+ /* Only reserve where possible:
+ * - Not within any already allocated areas
+ * - Not over any memory area (really needed, if above?)
+ * - Not within any part of the kernel
+ * - Not the bios reserved area
+ */
+ if ((start+size >= virt_to_phys(_text)
+ && start <= virt_to_phys(_end)) ||
+ !e820_all_mapped(start, start+size, E820_RAM) ||
+ memblock_x86_check_reserved_size(&start, &size,
+ 1<<EFI_PAGE_SHIFT)) {
+ /* Could not reserve, skip it */
+ md->num_pages = 0;
+ memblock_dbg(PFX "Could not reserve boot range "
+ "[0x%010llx-0x%010llx]\n",
+ start, start+size-1);
+ } else
+ memblock_x86_reserve_range(start, start+size,
+ "EFI Boot");
}
}
@@ -334,6 +351,10 @@
md->type != EFI_BOOT_SERVICES_DATA)
continue;
+ /* Could not reserve boot area */
+ if (!size)
+ continue;
+
free_bootmem_late(start, size);
}
}
@@ -483,9 +504,6 @@
x86_platform.set_wallclock = efi_set_rtc_mmss;
#endif
- /* Setup for EFI runtime service */
- reboot_type = BOOT_EFI;
-
#if EFI_DEBUG
print_efi_memmap();
#endif
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index dd7b88f..5525163 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1033,6 +1033,13 @@
xen_reboot(SHUTDOWN_poweroff);
}
+static void xen_machine_power_off(void)
+{
+ if (pm_power_off)
+ pm_power_off();
+ xen_reboot(SHUTDOWN_poweroff);
+}
+
static void xen_crash_shutdown(struct pt_regs *regs)
{
xen_reboot(SHUTDOWN_crash);
@@ -1058,7 +1065,7 @@
static const struct machine_ops xen_machine_ops __initconst = {
.restart = xen_restart,
.halt = xen_machine_halt,
- .power_off = xen_machine_halt,
+ .power_off = xen_machine_power_off,
.shutdown = xen_machine_halt,
.crash_shutdown = xen_crash_shutdown,
.emergency_restart = xen_emergency_restart,
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index dc708dc..0ccccb6 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -59,6 +59,7 @@
#include <asm/page.h>
#include <asm/init.h>
#include <asm/pat.h>
+#include <asm/smp.h>
#include <asm/xen/hypercall.h>
#include <asm/xen/hypervisor.h>
@@ -1231,7 +1232,11 @@
{
struct {
struct mmuext_op op;
+#ifdef CONFIG_SMP
+ DECLARE_BITMAP(mask, num_processors);
+#else
DECLARE_BITMAP(mask, NR_CPUS);
+#endif
} *args;
struct multicall_space mcs;
@@ -1599,6 +1604,11 @@
for (pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) {
pte_t pte;
+#ifdef CONFIG_X86_32
+ if (pfn > max_pfn_mapped)
+ max_pfn_mapped = pfn;
+#endif
+
if (!pte_none(pte_page[pteidx]))
continue;
@@ -1766,7 +1776,9 @@
initial_kernel_pmd =
extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
- max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->mfn_list));
+ max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
+ xen_start_info->nr_pt_frames * PAGE_SIZE +
+ 512*1024);
kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c
index 8bff7e7..1b2b73f 100644
--- a/arch/x86/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
@@ -189,10 +189,10 @@
unsigned argidx = roundup(b->argidx, sizeof(u64));
BUG_ON(preemptible());
- BUG_ON(b->argidx > MC_ARGS);
+ BUG_ON(b->argidx >= MC_ARGS);
if (b->mcidx == MC_BATCH ||
- (argidx + args) > MC_ARGS) {
+ (argidx + args) >= MC_ARGS) {
mc_stats_flush(b->mcidx == MC_BATCH ? FL_SLOTS : FL_ARGS);
xen_mc_flush();
argidx = roundup(b->argidx, sizeof(u64));
@@ -206,7 +206,7 @@
ret.args = &b->args[argidx];
b->argidx = argidx + args;
- BUG_ON(b->argidx > MC_ARGS);
+ BUG_ON(b->argidx >= MC_ARGS);
return ret;
}
@@ -216,7 +216,7 @@
struct multicall_space ret = { NULL, NULL };
BUG_ON(preemptible());
- BUG_ON(b->argidx > MC_ARGS);
+ BUG_ON(b->argidx >= MC_ARGS);
if (b->mcidx == 0)
return ret;
@@ -224,14 +224,14 @@
if (b->entries[b->mcidx - 1].op != op)
return ret;
- if ((b->argidx + size) > MC_ARGS)
+ if ((b->argidx + size) >= MC_ARGS)
return ret;
ret.mc = &b->entries[b->mcidx - 1];
ret.args = &b->args[b->argidx];
b->argidx += size;
- BUG_ON(b->argidx > MC_ARGS);
+ BUG_ON(b->argidx >= MC_ARGS);
return ret;
}
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index be1a464..60aeeb5 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -227,11 +227,7 @@
memcpy(map_raw, map, sizeof(map));
e820.nr_map = 0;
-#ifdef CONFIG_X86_32
xen_extra_mem_start = mem_end;
-#else
- xen_extra_mem_start = max((1ULL << 32), mem_end);
-#endif
for (i = 0; i < memmap.nr_entries; i++) {
unsigned long long end;
@@ -266,6 +262,12 @@
if (map[i].size > 0)
e820_add_region(map[i].addr, map[i].size, map[i].type);
}
+ /* Align the balloon area so that max_low_pfn does not get set
+ * to be at the _end_ of the PCI gap at the far end (fee01000).
+ * Note that xen_extra_mem_start gets set in the loop above to be
+ * past the last E820 region. */
+ if (xen_initial_domain() && (xen_extra_mem_start < (1ULL<<32)))
+ xen_extra_mem_start = (1ULL<<32);
/*
* In domU, the ISA region is normal, usable memory, but we
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 41038c0..b4533a8 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -205,11 +205,18 @@
static void __init xen_smp_prepare_cpus(unsigned int max_cpus)
{
unsigned cpu;
+ unsigned int i;
xen_init_lock_cpu(0);
smp_store_cpu_info(0);
cpu_data(0).x86_max_cores = 1;
+
+ for_each_possible_cpu(i) {
+ zalloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL);
+ zalloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL);
+ zalloc_cpumask_var(&per_cpu(cpu_llc_shared_map, i), GFP_KERNEL);
+ }
set_cpu_sibling_map(0);
if (xen_smp_intr_init(0))
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index a62be8d..3689f83 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -927,7 +927,7 @@
bio_list_init(&bio_list_on_stack);
- throtl_log(td, "dispatch nr_queued=%lu read=%u write=%u",
+ throtl_log(td, "dispatch nr_queued=%d read=%u write=%u",
total_nr_queued(td), td->nr_queued[READ],
td->nr_queued[WRITE]);
@@ -1204,7 +1204,7 @@
}
queue_bio:
- throtl_log_tg(td, tg, "[%c] bio. bdisp=%u sz=%u bps=%llu"
+ throtl_log_tg(td, tg, "[%c] bio. bdisp=%llu sz=%u bps=%llu"
" iodisp=%u iops=%u queued=%d/%d",
rw == READ ? 'R' : 'W',
tg->bytes_disp[rw], bio->bi_size, tg->bps[rw],
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 3c7b537..ae21919 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -988,9 +988,10 @@
cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
st->min_vdisktime);
- cfq_log_cfqq(cfqq->cfqd, cfqq, "sl_used=%u disp=%u charge=%u iops=%u"
- " sect=%u", used_sl, cfqq->slice_dispatch, charge,
- iops_mode(cfqd), cfqq->nr_sectors);
+ cfq_log_cfqq(cfqq->cfqd, cfqq,
+ "sl_used=%u disp=%u charge=%u iops=%u sect=%lu",
+ used_sl, cfqq->slice_dispatch, charge,
+ iops_mode(cfqd), cfqq->nr_sectors);
cfq_blkiocg_update_timeslice_used(&cfqg->blkg, used_sl,
unaccounted_sl);
cfq_blkiocg_set_start_empty_time(&cfqg->blkg);
@@ -2023,8 +2024,8 @@
*/
if (sample_valid(cic->ttime_samples) &&
(cfqq->slice_end - jiffies < cic->ttime_mean)) {
- cfq_log_cfqq(cfqd, cfqq, "Not idling. think_time:%d",
- cic->ttime_mean);
+ cfq_log_cfqq(cfqd, cfqq, "Not idling. think_time:%lu",
+ cic->ttime_mean);
return;
}
@@ -2772,8 +2773,14 @@
smp_wmb();
cic->key = cfqd_dead_key(cfqd);
- if (ioc->ioc_data == cic)
+ rcu_read_lock();
+ if (rcu_dereference(ioc->ioc_data) == cic) {
+ rcu_read_unlock();
+ spin_lock(&ioc->lock);
rcu_assign_pointer(ioc->ioc_data, NULL);
+ spin_unlock(&ioc->lock);
+ } else
+ rcu_read_unlock();
if (cic->cfqq[BLK_RW_ASYNC]) {
cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]);
@@ -3080,7 +3087,8 @@
spin_lock_irqsave(&ioc->lock, flags);
- BUG_ON(ioc->ioc_data == cic);
+ BUG_ON(rcu_dereference_check(ioc->ioc_data,
+ lockdep_is_held(&ioc->lock)) == cic);
radix_tree_delete(&ioc->radix_root, cfqd->cic_index);
hlist_del_rcu(&cic->cic_list);
diff --git a/block/genhd.c b/block/genhd.c
index 95822ae..3608289 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -1371,6 +1371,7 @@
struct gendisk *disk; /* the associated disk */
spinlock_t lock;
+ struct mutex block_mutex; /* protects blocking */
int block; /* event blocking depth */
unsigned int pending; /* events already sent out */
unsigned int clearing; /* events being cleared */
@@ -1414,22 +1415,44 @@
return msecs_to_jiffies(intv_msecs);
}
-static void __disk_block_events(struct gendisk *disk, bool sync)
+/**
+ * disk_block_events - block and flush disk event checking
+ * @disk: disk to block events for
+ *
+ * On return from this function, it is guaranteed that event checking
+ * isn't in progress and won't happen until unblocked by
+ * disk_unblock_events(). Events blocking is counted and the actual
+ * unblocking happens after the matching number of unblocks are done.
+ *
+ * Note that this intentionally does not block event checking from
+ * disk_clear_events().
+ *
+ * CONTEXT:
+ * Might sleep.
+ */
+void disk_block_events(struct gendisk *disk)
{
struct disk_events *ev = disk->ev;
unsigned long flags;
bool cancel;
+ if (!ev)
+ return;
+
+ /*
+ * Outer mutex ensures that the first blocker completes canceling
+ * the event work before further blockers are allowed to finish.
+ */
+ mutex_lock(&ev->block_mutex);
+
spin_lock_irqsave(&ev->lock, flags);
cancel = !ev->block++;
spin_unlock_irqrestore(&ev->lock, flags);
- if (cancel) {
- if (sync)
- cancel_delayed_work_sync(&disk->ev->dwork);
- else
- cancel_delayed_work(&disk->ev->dwork);
- }
+ if (cancel)
+ cancel_delayed_work_sync(&disk->ev->dwork);
+
+ mutex_unlock(&ev->block_mutex);
}
static void __disk_unblock_events(struct gendisk *disk, bool check_now)
@@ -1461,27 +1484,6 @@
}
/**
- * disk_block_events - block and flush disk event checking
- * @disk: disk to block events for
- *
- * On return from this function, it is guaranteed that event checking
- * isn't in progress and won't happen until unblocked by
- * disk_unblock_events(). Events blocking is counted and the actual
- * unblocking happens after the matching number of unblocks are done.
- *
- * Note that this intentionally does not block event checking from
- * disk_clear_events().
- *
- * CONTEXT:
- * Might sleep.
- */
-void disk_block_events(struct gendisk *disk)
-{
- if (disk->ev)
- __disk_block_events(disk, true);
-}
-
-/**
* disk_unblock_events - unblock disk event checking
* @disk: disk to unblock events for
*
@@ -1508,10 +1510,18 @@
*/
void disk_check_events(struct gendisk *disk)
{
- if (disk->ev) {
- __disk_block_events(disk, false);
- __disk_unblock_events(disk, true);
+ struct disk_events *ev = disk->ev;
+ unsigned long flags;
+
+ if (!ev)
+ return;
+
+ spin_lock_irqsave(&ev->lock, flags);
+ if (!ev->block) {
+ cancel_delayed_work(&ev->dwork);
+ queue_delayed_work(system_nrt_wq, &ev->dwork, 0);
}
+ spin_unlock_irqrestore(&ev->lock, flags);
}
EXPORT_SYMBOL_GPL(disk_check_events);
@@ -1546,7 +1556,7 @@
spin_unlock_irq(&ev->lock);
/* uncondtionally schedule event check and wait for it to finish */
- __disk_block_events(disk, true);
+ disk_block_events(disk);
queue_delayed_work(system_nrt_wq, &ev->dwork, 0);
flush_delayed_work(&ev->dwork);
__disk_unblock_events(disk, false);
@@ -1664,7 +1674,7 @@
if (intv < 0 && intv != -1)
return -EINVAL;
- __disk_block_events(disk, true);
+ disk_block_events(disk);
disk->ev->poll_msecs = intv;
__disk_unblock_events(disk, true);
@@ -1750,6 +1760,7 @@
INIT_LIST_HEAD(&ev->node);
ev->disk = disk;
spin_lock_init(&ev->lock);
+ mutex_init(&ev->block_mutex);
ev->block = 1;
ev->poll_msecs = -1;
INIT_DELAYED_WORK(&ev->dwork, disk_events_workfn);
@@ -1770,7 +1781,7 @@
if (!disk->ev)
return;
- __disk_block_events(disk, true);
+ disk_block_events(disk);
mutex_lock(&disk_events_mutex);
list_del_init(&disk->ev->node);
diff --git a/crypto/deflate.c b/crypto/deflate.c
index b5ccae2..b0165ec 100644
--- a/crypto/deflate.c
+++ b/crypto/deflate.c
@@ -32,7 +32,6 @@
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/net.h>
-#include <linux/slab.h>
#define DEFLATE_DEF_LEVEL Z_DEFAULT_COMPRESSION
#define DEFLATE_DEF_WINBITS 11
@@ -73,7 +72,7 @@
int ret = 0;
struct z_stream_s *stream = &ctx->decomp_stream;
- stream->workspace = kzalloc(zlib_inflate_workspacesize(), GFP_KERNEL);
+ stream->workspace = vzalloc(zlib_inflate_workspacesize());
if (!stream->workspace) {
ret = -ENOMEM;
goto out;
@@ -86,7 +85,7 @@
out:
return ret;
out_free:
- kfree(stream->workspace);
+ vfree(stream->workspace);
goto out;
}
@@ -99,7 +98,7 @@
static void deflate_decomp_exit(struct deflate_ctx *ctx)
{
zlib_inflateEnd(&ctx->decomp_stream);
- kfree(ctx->decomp_stream.workspace);
+ vfree(ctx->decomp_stream.workspace);
}
static int deflate_init(struct crypto_tfm *tfm)
diff --git a/crypto/zlib.c b/crypto/zlib.c
index d11d761..06b62e5 100644
--- a/crypto/zlib.c
+++ b/crypto/zlib.c
@@ -29,7 +29,6 @@
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/net.h>
-#include <linux/slab.h>
#include <crypto/internal/compress.h>
@@ -60,7 +59,7 @@
if (stream->workspace) {
zlib_inflateEnd(stream);
- kfree(stream->workspace);
+ vfree(stream->workspace);
stream->workspace = NULL;
}
}
@@ -228,13 +227,13 @@
? nla_get_u32(tb[ZLIB_DECOMP_WINDOWBITS])
: DEF_WBITS;
- stream->workspace = kzalloc(zlib_inflate_workspacesize(), GFP_KERNEL);
+ stream->workspace = vzalloc(zlib_inflate_workspacesize());
if (!stream->workspace)
return -ENOMEM;
ret = zlib_inflateInit2(stream, ctx->decomp_windowBits);
if (ret != Z_OK) {
- kfree(stream->workspace);
+ vfree(stream->workspace);
stream->workspace = NULL;
return -EINVAL;
}
diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c
index abda378..181bc2f 100644
--- a/drivers/acpi/apei/hest.c
+++ b/drivers/acpi/apei/hest.c
@@ -139,13 +139,23 @@
{
struct platform_device *ghes_dev;
struct ghes_arr *ghes_arr = data;
- int rc;
+ int rc, i;
if (hest_hdr->type != ACPI_HEST_TYPE_GENERIC_ERROR)
return 0;
if (!((struct acpi_hest_generic *)hest_hdr)->enabled)
return 0;
+ for (i = 0; i < ghes_arr->count; i++) {
+ struct acpi_hest_header *hdr;
+ ghes_dev = ghes_arr->ghes_devs[i];
+ hdr = *(struct acpi_hest_header **)ghes_dev->dev.platform_data;
+ if (hdr->source_id == hest_hdr->source_id) {
+ pr_warning(FW_WARN HEST_PFX "Duplicated hardware error source ID: %d.\n",
+ hdr->source_id);
+ return -EIO;
+ }
+ }
ghes_dev = platform_device_alloc("GHES", hest_hdr->source_id);
if (!ghes_dev)
return -ENOMEM;
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 52ca964..372f9b7 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1333,23 +1333,6 @@
EXPORT_SYMBOL(acpi_resources_are_enforced);
/*
- * Create and initialize a spinlock.
- */
-acpi_status
-acpi_os_create_lock(acpi_spinlock *out_handle)
-{
- spinlock_t *lock;
-
- lock = ACPI_ALLOCATE(sizeof(spinlock_t));
- if (!lock)
- return AE_NO_MEMORY;
- spin_lock_init(lock);
- *out_handle = lock;
-
- return AE_OK;
-}
-
-/*
* Deallocate the memory for a spinlock.
*/
void acpi_os_delete_lock(acpi_spinlock handle)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index d38c40f..41223c7 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -452,7 +452,7 @@
}
if (mask_port_map) {
- dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n",
+ dev_printk(KERN_WARNING, dev, "masking port_map 0x%x -> 0x%x\n",
port_map,
port_map & mask_port_map);
port_map &= mask_port_map;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 736bee5..000d03a 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4143,9 +4143,9 @@
* Devices which choke on SETXFER. Applies only if both the
* device and controller are SATA.
*/
- { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER },
- { "PIONEER DVD-RW DVR-212D", "1.28", ATA_HORKAGE_NOSETXFER },
- { "PIONEER DVD-RW DVR-216D", "1.08", ATA_HORKAGE_NOSETXFER },
+ { "PIONEER DVD-RW DVRTD08", NULL, ATA_HORKAGE_NOSETXFER },
+ { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER },
+ { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
/* End Marker */
{ }
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index dfb6e9d..7f099d6 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2802,10 +2802,11 @@
}
/*
- * Some controllers can't be frozen very well and may set
- * spuruious error conditions during reset. Clear accumulated
- * error information. As reset is the final recovery action,
- * nothing is lost by doing this.
+ * Some controllers can't be frozen very well and may set spurious
+ * error conditions during reset. Clear accumulated error
+ * information and re-thaw the port if frozen. As reset is the
+ * final recovery action and we cross check link onlineness against
+ * device classification later, no hotplug event is lost by this.
*/
spin_lock_irqsave(link->ap->lock, flags);
memset(&link->eh_info, 0, sizeof(link->eh_info));
@@ -2814,6 +2815,9 @@
ap->pflags &= ~ATA_PFLAG_EH_PENDING;
spin_unlock_irqrestore(link->ap->lock, flags);
+ if (ap->pflags & ATA_PFLAG_FROZEN)
+ ata_eh_thaw_port(ap);
+
/*
* Make sure onlineness and classification result correspond.
* Hotplug could have happened during reset and some
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d51f979..927f968 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3797,6 +3797,12 @@
*/
int ata_sas_port_start(struct ata_port *ap)
{
+ /*
+ * the port is marked as frozen at allocation time, but if we don't
+ * have new eh, we won't thaw it
+ */
+ if (!ap->ops->error_handler)
+ ap->pflags &= ~ATA_PFLAG_FROZEN;
return 0;
}
EXPORT_SYMBOL_GPL(ata_sas_port_start);
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 75a6a0c..5d7f58a 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -161,6 +161,9 @@
{ PCI_DEVICE(0x11AB, 0x6121), },
{ PCI_DEVICE(0x11AB, 0x6123), },
{ PCI_DEVICE(0x11AB, 0x6145), },
+ { PCI_DEVICE(0x1B4B, 0x91A0), },
+ { PCI_DEVICE(0x1B4B, 0x91A4), },
+
{ } /* terminate list */
};
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 1c4b3aa..dc88a39 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -389,7 +389,7 @@
/*
* Function: get_burst_length_encode
* arguments: datalength: length in bytes of data
- * returns value to be programmed in register corrresponding to data length
+ * returns value to be programmed in register corresponding to data length
* This value is effectively the log(base 2) of the length
*/
static int get_burst_length_encode(int datalength)
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 9f9b235..45d7c8f 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -30,7 +30,6 @@
static DEFINE_MUTEX(mem_sysfs_mutex);
#define MEMORY_CLASS_NAME "memory"
-#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS)
static int sections_per_block;
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 1c291af..6040717 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -367,7 +367,7 @@
*
* Returns &struct platform_device pointer on success, or ERR_PTR() on error.
*/
-struct platform_device *__init_or_module platform_device_register_resndata(
+struct platform_device *platform_device_register_resndata(
struct device *parent,
const char *name, int id,
const struct resource *res, unsigned int num,
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index c0dd09d..ad367c4 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -291,7 +291,7 @@
{
struct pm_clk_notifier_block *clknb;
struct device *dev = data;
- char *con_id;
+ char **con_id;
int error;
dev_dbg(dev, "%s() %ld\n", __func__, action);
@@ -309,8 +309,8 @@
dev->pwr_domain = clknb->pwr_domain;
if (clknb->con_ids[0]) {
- for (con_id = clknb->con_ids[0]; *con_id; con_id++)
- pm_runtime_clk_add(dev, con_id);
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ pm_runtime_clk_add(dev, *con_id);
} else {
pm_runtime_clk_add(dev, NULL);
}
@@ -380,25 +380,25 @@
{
struct pm_clk_notifier_block *clknb;
struct device *dev = data;
- char *con_id;
+ char **con_id;
dev_dbg(dev, "%s() %ld\n", __func__, action);
clknb = container_of(nb, struct pm_clk_notifier_block, nb);
switch (action) {
- case BUS_NOTIFY_ADD_DEVICE:
+ case BUS_NOTIFY_BIND_DRIVER:
if (clknb->con_ids[0]) {
- for (con_id = clknb->con_ids[0]; *con_id; con_id++)
- enable_clock(dev, con_id);
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ enable_clock(dev, *con_id);
} else {
enable_clock(dev, NULL);
}
break;
- case BUS_NOTIFY_DEL_DEVICE:
+ case BUS_NOTIFY_UNBOUND_DRIVER:
if (clknb->con_ids[0]) {
- for (con_id = clknb->con_ids[0]; *con_id; con_id++)
- disable_clock(dev, con_id);
+ for (con_id = clknb->con_ids; *con_id; con_id++)
+ disable_clock(dev, *con_id);
} else {
disable_clock(dev, NULL);
}
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index aa632020..06f09bf 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -57,7 +57,8 @@
*/
void device_pm_init(struct device *dev)
{
- dev->power.in_suspend = false;
+ dev->power.is_prepared = false;
+ dev->power.is_suspended = false;
init_completion(&dev->power.completion);
complete_all(&dev->power.completion);
dev->power.wakeup = NULL;
@@ -91,7 +92,7 @@
pr_debug("PM: Adding info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus", dev_name(dev));
mutex_lock(&dpm_list_mtx);
- if (dev->parent && dev->parent->power.in_suspend)
+ if (dev->parent && dev->parent->power.is_prepared)
dev_warn(dev, "parent %s should not be sleeping\n",
dev_name(dev->parent));
list_add_tail(&dev->power.entry, &dpm_list);
@@ -511,7 +512,14 @@
dpm_wait(dev->parent, async);
device_lock(dev);
- dev->power.in_suspend = false;
+ /*
+ * This is a fib. But we'll allow new children to be added below
+ * a resumed device, even if the device hasn't been completed yet.
+ */
+ dev->power.is_prepared = false;
+
+ if (!dev->power.is_suspended)
+ goto Unlock;
if (dev->pwr_domain) {
pm_dev_dbg(dev, state, "power domain ");
@@ -548,6 +556,9 @@
}
End:
+ dev->power.is_suspended = false;
+
+ Unlock:
device_unlock(dev);
complete_all(&dev->power.completion);
@@ -670,7 +681,7 @@
struct device *dev = to_device(dpm_prepared_list.prev);
get_device(dev);
- dev->power.in_suspend = false;
+ dev->power.is_prepared = false;
list_move(&dev->power.entry, &list);
mutex_unlock(&dpm_list_mtx);
@@ -835,11 +846,11 @@
device_lock(dev);
if (async_error)
- goto End;
+ goto Unlock;
if (pm_wakeup_pending()) {
async_error = -EBUSY;
- goto End;
+ goto Unlock;
}
if (dev->pwr_domain) {
@@ -877,6 +888,9 @@
}
End:
+ dev->power.is_suspended = !error;
+
+ Unlock:
device_unlock(dev);
complete_all(&dev->power.completion);
@@ -1042,7 +1056,7 @@
put_device(dev);
break;
}
- dev->power.in_suspend = true;
+ dev->power.is_prepared = true;
if (!list_empty(&dev->power.entry))
list_move_tail(&dev->power.entry, &dpm_prepared_list);
put_device(dev);
diff --git a/drivers/base/syscore.c b/drivers/base/syscore.c
index c126db3..e8d11b6 100644
--- a/drivers/base/syscore.c
+++ b/drivers/base/syscore.c
@@ -9,6 +9,7 @@
#include <linux/syscore_ops.h>
#include <linux/mutex.h>
#include <linux/module.h>
+#include <linux/interrupt.h>
static LIST_HEAD(syscore_ops_list);
static DEFINE_MUTEX(syscore_ops_lock);
@@ -48,6 +49,13 @@
struct syscore_ops *ops;
int ret = 0;
+ pr_debug("Checking wakeup interrupts\n");
+
+ /* Return error code if there are any wakeup interrupts pending. */
+ ret = check_wakeup_irqs();
+ if (ret)
+ return ret;
+
WARN_ONCE(!irqs_disabled(),
"Interrupts enabled before system core suspend.\n");
diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c
index 09ef9a8..cf0e63d 100644
--- a/drivers/block/drbd/drbd_actlog.c
+++ b/drivers/block/drbd/drbd_actlog.c
@@ -79,7 +79,7 @@
md_io.error = 0;
if ((rw & WRITE) && !test_bit(MD_NO_FUA, &mdev->flags))
- rw |= REQ_FUA;
+ rw |= REQ_FUA | REQ_FLUSH;
rw |= REQ_SYNC;
bio = bio_alloc(GFP_NOIO, 1);
diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c
index f440a02..7b97629 100644
--- a/drivers/block/drbd/drbd_bitmap.c
+++ b/drivers/block/drbd/drbd_bitmap.c
@@ -112,9 +112,6 @@
struct task_struct *bm_task;
};
-static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
- unsigned long e, int val, const enum km_type km);
-
#define bm_print_lock_info(m) __bm_print_lock_info(m, __func__)
static void __bm_print_lock_info(struct drbd_conf *mdev, const char *func)
{
@@ -994,6 +991,9 @@
bio_endio(bio, -EIO);
} else {
submit_bio(rw, bio);
+ /* this should not count as user activity and cause the
+ * resync to throttle -- see drbd_rs_should_slow_down(). */
+ atomic_add(len >> 9, &mdev->rs_sect_ev);
}
}
@@ -1256,7 +1256,7 @@
* expected to be called for only a few bits (e - s about BITS_PER_LONG).
* Must hold bitmap lock already. */
static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
- unsigned long e, int val, const enum km_type km)
+ unsigned long e, int val)
{
struct drbd_bitmap *b = mdev->bitmap;
unsigned long *p_addr = NULL;
@@ -1274,14 +1274,14 @@
unsigned int page_nr = bm_bit_to_page_idx(b, bitnr);
if (page_nr != last_page_nr) {
if (p_addr)
- __bm_unmap(p_addr, km);
+ __bm_unmap(p_addr, KM_IRQ1);
if (c < 0)
bm_set_page_lazy_writeout(b->bm_pages[last_page_nr]);
else if (c > 0)
bm_set_page_need_writeout(b->bm_pages[last_page_nr]);
changed_total += c;
c = 0;
- p_addr = __bm_map_pidx(b, page_nr, km);
+ p_addr = __bm_map_pidx(b, page_nr, KM_IRQ1);
last_page_nr = page_nr;
}
if (val)
@@ -1290,7 +1290,7 @@
c -= (0 != __test_and_clear_bit_le(bitnr & BITS_PER_PAGE_MASK, p_addr));
}
if (p_addr)
- __bm_unmap(p_addr, km);
+ __bm_unmap(p_addr, KM_IRQ1);
if (c < 0)
bm_set_page_lazy_writeout(b->bm_pages[last_page_nr]);
else if (c > 0)
@@ -1318,7 +1318,7 @@
if ((val ? BM_DONT_SET : BM_DONT_CLEAR) & b->bm_flags)
bm_print_lock_info(mdev);
- c = __bm_change_bits_to(mdev, s, e, val, KM_IRQ1);
+ c = __bm_change_bits_to(mdev, s, e, val);
spin_unlock_irqrestore(&b->bm_lock, flags);
return c;
@@ -1343,16 +1343,17 @@
{
int i;
int bits;
- unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_USER0);
+ unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_IRQ1);
for (i = first_word; i < last_word; i++) {
bits = hweight_long(paddr[i]);
paddr[i] = ~0UL;
b->bm_set += BITS_PER_LONG - bits;
}
- kunmap_atomic(paddr, KM_USER0);
+ kunmap_atomic(paddr, KM_IRQ1);
}
-/* Same thing as drbd_bm_set_bits, but without taking the spin_lock_irqsave.
+/* Same thing as drbd_bm_set_bits,
+ * but more efficient for a large bit range.
* You must first drbd_bm_lock().
* Can be called to set the whole bitmap in one go.
* Sets bits from s to e _inclusive_. */
@@ -1366,6 +1367,7 @@
* Do not use memset, because we must account for changes,
* so we need to loop over the words with hweight() anyways.
*/
+ struct drbd_bitmap *b = mdev->bitmap;
unsigned long sl = ALIGN(s,BITS_PER_LONG);
unsigned long el = (e+1) & ~((unsigned long)BITS_PER_LONG-1);
int first_page;
@@ -1376,15 +1378,19 @@
if (e - s <= 3*BITS_PER_LONG) {
/* don't bother; el and sl may even be wrong. */
- __bm_change_bits_to(mdev, s, e, 1, KM_USER0);
+ spin_lock_irq(&b->bm_lock);
+ __bm_change_bits_to(mdev, s, e, 1);
+ spin_unlock_irq(&b->bm_lock);
return;
}
/* difference is large enough that we can trust sl and el */
+ spin_lock_irq(&b->bm_lock);
+
/* bits filling the current long */
if (sl)
- __bm_change_bits_to(mdev, s, sl-1, 1, KM_USER0);
+ __bm_change_bits_to(mdev, s, sl-1, 1);
first_page = sl >> (3 + PAGE_SHIFT);
last_page = el >> (3 + PAGE_SHIFT);
@@ -1397,8 +1403,10 @@
/* first and full pages, unless first page == last page */
for (page_nr = first_page; page_nr < last_page; page_nr++) {
bm_set_full_words_within_one_page(mdev->bitmap, page_nr, first_word, last_word);
+ spin_unlock_irq(&b->bm_lock);
cond_resched();
first_word = 0;
+ spin_lock_irq(&b->bm_lock);
}
/* last page (respectively only page, for first page == last page) */
@@ -1411,7 +1419,8 @@
* it would trigger an assert in __bm_change_bits_to()
*/
if (el <= e)
- __bm_change_bits_to(mdev, el, e, 1, KM_USER0);
+ __bm_change_bits_to(mdev, el, e, 1);
+ spin_unlock_irq(&b->bm_lock);
}
/* returns bit state
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 25d32c5..43beaca 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -4602,6 +4602,11 @@
dev_err(DEV, "meta connection shut down by peer.\n");
goto reconnect;
} else if (rv == -EAGAIN) {
+ /* If the data socket received something meanwhile,
+ * that is good enough: peer is still alive. */
+ if (time_after(mdev->last_received,
+ jiffies - mdev->meta.socket->sk->sk_rcvtimeo))
+ continue;
if (ping_timeout_active) {
dev_err(DEV, "PingAck did not arrive in time.\n");
goto reconnect;
@@ -4637,6 +4642,7 @@
goto reconnect;
}
if (received == expect) {
+ mdev->last_received = jiffies;
D_ASSERT(cmd != NULL);
if (!cmd->process(mdev, h))
goto reconnect;
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index 4d76b06..4d3e6f6 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -536,12 +536,7 @@
return 1;
}
- /* starting with drbd 8.3.8, we can handle multi-bio EEs,
- * if it should be necessary */
- max_bio_size =
- mdev->agreed_pro_version < 94 ? queue_max_hw_sectors(mdev->rq_queue) << 9 :
- mdev->agreed_pro_version < 95 ? DRBD_MAX_SIZE_H80_PACKET : DRBD_MAX_BIO_SIZE;
-
+ max_bio_size = queue_max_hw_sectors(mdev->rq_queue) << 9;
number = drbd_rs_number_requests(mdev);
if (number == 0)
goto requeue;
diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c
index fd6305b..8ecf4c6 100644
--- a/drivers/bluetooth/btmrvl_debugfs.c
+++ b/drivers/bluetooth/btmrvl_debugfs.c
@@ -64,6 +64,8 @@
return -EFAULT;
ret = strict_strtol(buf, 10, &result);
+ if (ret)
+ return ret;
priv->btmrvl_dev.hscfgcmd = result;
@@ -108,6 +110,8 @@
return -EFAULT;
ret = strict_strtol(buf, 10, &result);
+ if (ret)
+ return ret;
priv->btmrvl_dev.psmode = result;
@@ -147,6 +151,8 @@
return -EFAULT;
ret = strict_strtol(buf, 10, &result);
+ if (ret)
+ return ret;
priv->btmrvl_dev.pscmd = result;
@@ -191,6 +197,8 @@
return -EFAULT;
ret = strict_strtol(buf, 16, &result);
+ if (ret)
+ return ret;
priv->btmrvl_dev.gpio_gap = result;
@@ -230,6 +238,8 @@
return -EFAULT;
ret = strict_strtol(buf, 10, &result);
+ if (ret)
+ return ret;
priv->btmrvl_dev.hscmd = result;
if (priv->btmrvl_dev.hscmd) {
@@ -272,6 +282,8 @@
return -EFAULT;
ret = strict_strtol(buf, 10, &result);
+ if (ret)
+ return ret;
priv->btmrvl_dev.hsmode = result;
diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h
index 999803c..5da67f1 100644
--- a/drivers/char/agp/intel-agp.h
+++ b/drivers/char/agp/intel-agp.h
@@ -90,9 +90,10 @@
#define G4x_GMCH_SIZE_MASK (0xf << 8)
#define G4x_GMCH_SIZE_1M (0x1 << 8)
#define G4x_GMCH_SIZE_2M (0x3 << 8)
-#define G4x_GMCH_SIZE_VT_1M (0x9 << 8)
-#define G4x_GMCH_SIZE_VT_1_5M (0xa << 8)
-#define G4x_GMCH_SIZE_VT_2M (0xc << 8)
+#define G4x_GMCH_SIZE_VT_EN (0x8 << 8)
+#define G4x_GMCH_SIZE_VT_1M (G4x_GMCH_SIZE_1M | G4x_GMCH_SIZE_VT_EN)
+#define G4x_GMCH_SIZE_VT_1_5M ((0x2 << 8) | G4x_GMCH_SIZE_VT_EN)
+#define G4x_GMCH_SIZE_VT_2M (G4x_GMCH_SIZE_2M | G4x_GMCH_SIZE_VT_EN)
#define GFX_FLSH_CNTL 0x2170 /* 915+ */
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 051474c..34d6a1c 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -163,11 +163,32 @@
* This has the effect of treating non-periodic like periodic.
*/
if ((devp->hd_flags & (HPET_IE | HPET_PERIODIC)) == HPET_IE) {
- unsigned long m, t;
+ unsigned long m, t, mc, base, k;
+ struct hpet __iomem *hpet = devp->hd_hpet;
+ struct hpets *hpetp = devp->hd_hpets;
t = devp->hd_ireqfreq;
m = read_counter(&devp->hd_timer->hpet_compare);
- write_counter(t + m, &devp->hd_timer->hpet_compare);
+ mc = read_counter(&hpet->hpet_mc);
+ /* The time for the next interrupt would logically be t + m,
+ * however, if we are very unlucky and the interrupt is delayed
+ * for longer than t then we will completely miss the next
+ * interrupt if we set t + m and an application will hang.
+ * Therefore we need to make a more complex computation assuming
+ * that there exists a k for which the following is true:
+ * k * t + base < mc + delta
+ * (k + 1) * t + base > mc + delta
+ * where t is the interval in hpet ticks for the given freq,
+ * base is the theoretical start value 0 < base < t,
+ * mc is the main counter value at the time of the interrupt,
+ * delta is the time it takes to write the a value to the
+ * comparator.
+ * k may then be computed as (mc - base + delta) / t .
+ */
+ base = mc % t;
+ k = (mc - base + hpetp->hp_delta) / t;
+ write_counter(t * (k + 1) + base,
+ &devp->hd_timer->hpet_compare);
}
if (devp->hd_flags & HPET_SHARED_IRQ)
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index 219d88a..dde6a0f 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -139,6 +139,7 @@
spin_unlock_bh(&dev->cbdev->queue_lock);
if (cbq != NULL) {
+ err = 0;
cbq->callback(msg, nsp);
kfree_skb(skb);
cn_queue_release_callback(cbq);
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index 4e04e12..596d5dd 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -759,7 +759,7 @@
cpufreq_unregister_driver(&acpi_cpufreq_driver);
- free_percpu(acpi_perf_data);
+ free_acpi_perf_data();
}
module_param(acpi_pstate_strict, uint, 0644);
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index b60a4c2..faf7c52 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -298,11 +298,13 @@
old_index = stat->last_index;
new_index = freq_table_get_index(stat, freq->new);
- cpufreq_stats_update(freq->cpu);
- if (old_index == new_index)
+ /* We can't do stat->time_in_state[-1]= .. */
+ if (old_index == -1 || new_index == -1)
return 0;
- if (old_index == -1 || new_index == -1)
+ cpufreq_stats_update(freq->cpu);
+
+ if (old_index == new_index)
return 0;
spin_lock(&cpufreq_stats_lock);
@@ -387,6 +389,7 @@
unregister_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
for_each_online_cpu(cpu) {
cpufreq_stats_free_table(cpu);
+ cpufreq_stats_free_sysfs(cpu);
}
}
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index 83479b6..bce576d 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -1079,6 +1079,9 @@
}
res = transition_fid_vid(data, fid, vid);
+ if (res)
+ return res;
+
freqs.new = find_khz_freq_from_fid(data->currfid);
for_each_cpu(i, data->available_cores) {
@@ -1101,7 +1104,8 @@
/* get MSR index for hardware pstate transition */
pstate = index & HW_PSTATE_MASK;
if (pstate > data->max_hw_pstate)
- return 0;
+ return -EINVAL;
+
freqs.old = find_khz_freq_from_pstate(data->powernow_table,
data->currpstate);
freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c
index d0e65d6..676d957 100644
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -238,9 +238,9 @@
/* build shared descriptor for this session */
sh_desc = kmalloc(CAAM_CMD_SZ * DESC_AEAD_SHARED_TEXT_LEN +
- keys_fit_inline ?
- ctx->split_key_pad_len + ctx->enckeylen :
- CAAM_PTR_SZ * 2, GFP_DMA | GFP_KERNEL);
+ (keys_fit_inline ?
+ ctx->split_key_pad_len + ctx->enckeylen :
+ CAAM_PTR_SZ * 2), GFP_DMA | GFP_KERNEL);
if (!sh_desc) {
dev_err(jrdev, "could not allocate shared descriptor\n");
return -ENOMEM;
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index 2a638f9..0283300 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -1221,6 +1221,11 @@
} else {
do {
for (i = chanirq_res->start; i <= chanirq_res->end; i++) {
+ if (irq_cnt >= SH_DMAC_MAX_CHANNELS) {
+ irq_cap = 1;
+ break;
+ }
+
if ((errirq_res->flags & IORESOURCE_BITS) ==
IORESOURCE_IRQ_SHAREABLE)
chan_flag[irq_cnt] = IRQF_SHARED;
@@ -1230,15 +1235,11 @@
"Found IRQ %d for channel %d\n",
i, irq_cnt);
chan_irq[irq_cnt++] = i;
-
- if (irq_cnt >= SH_DMAC_MAX_CHANNELS)
- break;
}
- if (irq_cnt >= SH_DMAC_MAX_CHANNELS) {
- irq_cap = 1;
+ if (irq_cnt >= SH_DMAC_MAX_CHANNELS)
break;
- }
+
chanirq_res = platform_get_resource(pdev,
IORESOURCE_IRQ, ++irqres);
} while (irq_cnt < pdata->channel_num && chanirq_res);
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 438e6c8..ebb8973 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -264,6 +264,7 @@
#define PCI_DEVICE_ID_AGERE_FW643 0x5901
#define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380
#define PCI_DEVICE_ID_TI_TSB12LV22 0x8009
+#define PCI_VENDOR_ID_PINNACLE_SYSTEMS 0x11bd
#define QUIRK_CYCLE_TIMER 1
#define QUIRK_RESET_PACKET 2
@@ -3190,6 +3191,11 @@
int i, err;
size_t size;
+ if (dev->vendor == PCI_VENDOR_ID_PINNACLE_SYSTEMS) {
+ dev_err(&dev->dev, "Pinnacle MovieBoard is not yet supported\n");
+ return -ENOSYS;
+ }
+
ohci = kzalloc(sizeof(*ohci), GFP_KERNEL);
if (ohci == NULL) {
err = -ENOMEM;
diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig
index 87096b6..2f21b0b 100644
--- a/drivers/firmware/google/Kconfig
+++ b/drivers/firmware/google/Kconfig
@@ -13,6 +13,7 @@
config GOOGLE_SMI
tristate "SMI interface for Google platforms"
depends on ACPI && DMI
+ select EFI
select EFI_VARS
help
Say Y here if you want to enable SMI callbacks for Google
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index f032e44..bfe7232 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -108,7 +108,9 @@
*/
unsigned long __init find_ibft_region(unsigned long *sizep)
{
+#ifdef CONFIG_ACPI
int i;
+#endif
ibft_addr = NULL;
#ifdef CONFIG_ACPI
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 4a7f631..2967002 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -87,32 +87,20 @@
Say yes here to support GPIO functionality of IT8761E super I/O chip.
config GPIO_EXYNOS4
- bool "Samsung Exynos4 GPIO library support"
- default y if CPU_EXYNOS4210
- depends on ARM
- help
- Say yes here to support Samsung Exynos4 series SoCs GPIO library
+ def_bool y
+ depends on CPU_EXYNOS4210
config GPIO_PLAT_SAMSUNG
- bool "Samsung SoCs GPIO library support"
- default y if SAMSUNG_GPIOLIB_4BIT
- depends on ARM
- help
- Say yes here to support Samsung SoCs GPIO library
+ def_bool y
+ depends on SAMSUNG_GPIOLIB_4BIT
config GPIO_S5PC100
- bool "Samsung S5PC100 GPIO library support"
- default y if CPU_S5PC100
- depends on ARM
- help
- Say yes here to support Samsung S5PC100 SoCs GPIO library
+ def_bool y
+ depends on CPU_S5PC100
config GPIO_S5PV210
- bool "Samsung S5PV210/S5PC110 GPIO library support"
- default y if CPU_S5PV210
- depends on ARM
- help
- Say yes here to support Samsung S5PV210/S5PC110 SoCs GPIO library
+ def_bool y
+ depends on CPU_S5PV210
config GPIO_PL061
bool "PrimeCell PL061 GPIO support"
diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c
index d54ca6a..9029835 100644
--- a/drivers/gpio/gpio-exynos4.c
+++ b/drivers/gpio/gpio-exynos4.c
@@ -21,16 +21,37 @@
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
+int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ if (pull == S3C_GPIO_PULL_UP)
+ pull = 3;
+
+ return s3c_gpio_setpull_updown(chip, off, pull);
+}
+
+s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ s3c_gpio_pull_t pull;
+
+ pull = s3c_gpio_getpull_updown(chip, off);
+ if (pull == 3)
+ pull = S3C_GPIO_PULL_UP;
+
+ return pull;
+}
+
static struct s3c_gpio_cfg gpio_cfg = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
+ .set_pull = s3c_gpio_setpull_exynos4,
+ .get_pull = s3c_gpio_getpull_exynos4,
};
static struct s3c_gpio_cfg gpio_cfg_noint = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
+ .set_pull = s3c_gpio_setpull_exynos4,
+ .get_pull = s3c_gpio_getpull_exynos4,
};
/*
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 4961ef9..2c212c7 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -4,6 +4,7 @@
* Copyright (C) 2008,2009 STMicroelectronics
* Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
* Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2011 Linus Walleij <linus.walleij@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -49,6 +50,7 @@
u32 (*get_secondary_status)(unsigned int bank);
void (*set_ioforce)(bool enable);
spinlock_t lock;
+ bool sleepmode;
/* Keep track of configured edges */
u32 edge_rising;
u32 edge_falling;
@@ -393,14 +395,25 @@
* @gpio: pin number
* @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE,
*
- * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is
- * changed to an input (with pullup/down enabled) in sleep and deep sleep. If
- * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was
- * configured even when in sleep and deep sleep.
+ * This register is actually in the pinmux layer, not the GPIO block itself.
+ * The GPIO1B_SLPM register defines the GPIO mode when SLEEP/DEEP-SLEEP
+ * mode is entered (i.e. when signal IOFORCE is HIGH by the platform code).
+ * Each GPIO can be configured to be forced into GPIO mode when IOFORCE is
+ * HIGH, overriding the normal setting defined by GPIO_AFSELx registers.
+ * When IOFORCE returns LOW (by software, after SLEEP/DEEP-SLEEP exit),
+ * the GPIOs return to the normal setting defined by GPIO_AFSELx registers.
*
- * On DB8500v2 onwards, this setting loses the previous meaning and instead
- * indicates if wakeup detection is enabled on the pin. Note that
- * enable_irq_wake() will automatically enable wakeup detection.
+ * If @mode is NMK_GPIO_SLPM_INPUT, the corresponding GPIO is switched to GPIO
+ * mode when signal IOFORCE is HIGH (i.e. when SLEEP/DEEP-SLEEP mode is
+ * entered) regardless of the altfunction selected. Also wake-up detection is
+ * ENABLED.
+ *
+ * If @mode is NMK_GPIO_SLPM_NOCHANGE, the corresponding GPIO remains
+ * controlled by NMK_GPIO_DATC, NMK_GPIO_DATS, NMK_GPIO_DIR, NMK_GPIO_PDIS
+ * (for altfunction GPIO) or respective on-chip peripherals (for other
+ * altfuncs) when IOFORCE is HIGH. Also wake-up detection DISABLED.
+ *
+ * Note that enable_irq_wake() will automatically enable wakeup detection.
*/
int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
{
@@ -551,6 +564,12 @@
static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip,
int gpio, bool on)
{
+ if (nmk_chip->sleepmode) {
+ __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base,
+ on ? NMK_GPIO_SLPM_WAKEUP_ENABLE
+ : NMK_GPIO_SLPM_WAKEUP_DISABLE);
+ }
+
__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on);
}
@@ -901,7 +920,7 @@
writel(chip->fwimsc & chip->real_wake,
chip->addr + NMK_GPIO_FWIMSC);
- if (cpu_is_u8500v2()) {
+ if (chip->sleepmode) {
chip->slpm = readl(chip->addr + NMK_GPIO_SLPC);
/* 0 -> wakeup enable */
@@ -923,7 +942,7 @@
writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC);
writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC);
- if (cpu_is_u8500v2())
+ if (chip->sleepmode)
writel(chip->slpm, chip->addr + NMK_GPIO_SLPC);
}
}
@@ -1010,6 +1029,7 @@
nmk_chip->secondary_parent_irq = secondary_irq;
nmk_chip->get_secondary_status = pdata->get_secondary_status;
nmk_chip->set_ioforce = pdata->set_ioforce;
+ nmk_chip->sleepmode = pdata->supports_sleepmode;
spin_lock_init(&nmk_chip->lock);
chip = &nmk_chip->chip;
@@ -1065,5 +1085,3 @@
MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
MODULE_DESCRIPTION("Nomadik GPIO Driver");
MODULE_LICENSE("GPL");
-
-
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 6c51191..35bebde 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -432,7 +432,6 @@
{
void __iomem *base = bank->base;
u32 gpio_bit = 1 << gpio;
- u32 val;
if (cpu_is_omap44xx()) {
MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
@@ -455,15 +454,8 @@
}
if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
if (cpu_is_omap44xx()) {
- if (trigger != 0)
- __raw_writel(1 << gpio, bank->base+
- OMAP4_GPIO_IRQWAKEN0);
- else {
- val = __raw_readl(bank->base +
- OMAP4_GPIO_IRQWAKEN0);
- __raw_writel(val & (~(1 << gpio)), bank->base +
- OMAP4_GPIO_IRQWAKEN0);
- }
+ MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit,
+ trigger != 0);
} else {
/*
* GPIO wakeup request can only be generated on edge
@@ -477,8 +469,9 @@
+ OMAP24XX_GPIO_CLEARWKUENA);
}
}
- /* This part needs to be executed always for OMAP34xx */
- if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
+ /* This part needs to be executed always for OMAP{34xx, 44xx} */
+ if (cpu_is_omap34xx() || cpu_is_omap44xx() ||
+ (bank->non_wakeup_gpios & gpio_bit)) {
/*
* Log the edge gpio and manually trigger the IRQ
* after resume if the input level changes
@@ -1134,8 +1127,11 @@
{
unsigned int gpio = d->irq - IH_GPIO_BASE;
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ unsigned long flags;
+ spin_lock_irqsave(&bank->lock, flags);
_reset_gpio(bank, gpio);
+ spin_unlock_irqrestore(&bank->lock, flags);
}
static void gpio_ack_irq(struct irq_data *d)
@@ -1150,9 +1146,12 @@
{
unsigned int gpio = d->irq - IH_GPIO_BASE;
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
+ unsigned long flags;
+ spin_lock_irqsave(&bank->lock, flags);
_set_gpio_irqenable(bank, gpio, 0);
_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
+ spin_unlock_irqrestore(&bank->lock, flags);
}
static void gpio_unmask_irq(struct irq_data *d)
@@ -1161,7 +1160,9 @@
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
unsigned int irq_mask = 1 << get_gpio_index(gpio);
u32 trigger = irqd_get_trigger_type(d);
+ unsigned long flags;
+ spin_lock_irqsave(&bank->lock, flags);
if (trigger)
_set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
@@ -1173,6 +1174,7 @@
}
_set_gpio_irqenable(bank, gpio, 1);
+ spin_unlock_irqrestore(&bank->lock, flags);
}
static struct irq_chip gpio_irq_chip = {
@@ -1524,7 +1526,7 @@
}
}
-static void __init omap_gpio_chip_init(struct gpio_bank *bank)
+static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
{
int j;
static int gpio;
diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c
index bd6571e..644ba12 100644
--- a/drivers/gpio/langwell_gpio.c
+++ b/drivers/gpio/langwell_gpio.c
@@ -223,7 +223,7 @@
gedr = gpio_reg(&lnw->chip, base, GEDR);
pending = readl(gedr);
while (pending) {
- gpio = __ffs(pending) - 1;
+ gpio = __ffs(pending);
mask = BIT(gpio);
pending &= ~mask;
/* Clear before handling so we can't lose an edge */
diff --git a/drivers/gpio/tps65910-gpio.c b/drivers/gpio/tps65910-gpio.c
index 8d1ddfd..15097ca 100644
--- a/drivers/gpio/tps65910-gpio.c
+++ b/drivers/gpio/tps65910-gpio.c
@@ -81,8 +81,10 @@
switch(tps65910_chip_id(tps65910)) {
case TPS65910:
tps65910->gpio.ngpio = 6;
+ break;
case TPS65911:
tps65910->gpio.ngpio = 9;
+ break;
default:
return;
}
diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c
index 309644c..2bcfb0b 100644
--- a/drivers/gpio/wm831x-gpio.c
+++ b/drivers/gpio/wm831x-gpio.c
@@ -180,6 +180,7 @@
break;
case WM831X_GPIO_PULL_UP:
pull = "pullup";
+ break;
default:
pull = "INVALID PULL";
break;
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index 3e257a5..61e1ef9 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -46,10 +46,11 @@
list_for_each_entry(entry, &dev->maplist, head) {
/*
* Because the kernel-userspace ABI is fixed at a 32-bit offset
- * while PCI resources may live above that, we ignore the map
- * offset for maps of type _DRM_FRAMEBUFFER or _DRM_REGISTERS.
- * It is assumed that each driver will have only one resource of
- * each type.
+ * while PCI resources may live above that, we only compare the
+ * lower 32 bits of the map offset for maps of type
+ * _DRM_FRAMEBUFFER or _DRM_REGISTERS.
+ * It is assumed that if a driver have more than one resource
+ * of each type, the lower 32 bits are different.
*/
if (!entry->map ||
map->type != entry->map->type ||
@@ -59,9 +60,12 @@
case _DRM_SHM:
if (map->flags != _DRM_CONTAINS_LOCK)
break;
+ return entry;
case _DRM_REGISTERS:
case _DRM_FRAME_BUFFER:
- return entry;
+ if ((entry->map->offset & 0xffffffff) ==
+ (map->offset & 0xffffffff))
+ return entry;
default: /* Make gcc happy */
;
}
@@ -183,9 +187,6 @@
return -EINVAL;
}
#endif
-#ifdef __alpha__
- map->offset += dev->hose->mem_space->start;
-#endif
/* Some drivers preinitialize some maps, without the X Server
* needing to be aware of it. Therefore, we just return success
* when the server tries to create a duplicate map.
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 872747c..82db185 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -886,9 +886,6 @@
total_objects += dev->mode_config.num_connector;
total_objects += dev->mode_config.num_encoder;
- if (total_objects == 0)
- return -EINVAL;
-
group->id_list = kzalloc(total_objects * sizeof(uint32_t), GFP_KERNEL);
if (!group->id_list)
return -ENOMEM;
@@ -1113,7 +1110,7 @@
if (card_res->count_fbs >= fb_count) {
copied = 0;
fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr;
- list_for_each_entry(fb, &file_priv->fbs, head) {
+ list_for_each_entry(fb, &file_priv->fbs, filp_head) {
if (put_user(fb->base.id, fb_id + copied)) {
ret = -EFAULT;
goto out;
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 0a9357c..0929219 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -184,9 +184,9 @@
bad:
if (raw_edid) {
- DRM_ERROR("Raw EDID:\n");
+ printk(KERN_ERR "Raw EDID:\n");
print_hex_dump_bytes(KERN_ERR, DUMP_PREFIX_NONE, raw_edid, EDID_LENGTH);
- printk("\n");
+ printk(KERN_ERR "\n");
}
return 0;
}
@@ -258,6 +258,17 @@
return ret == 2 ? 0 : -1;
}
+static bool drm_edid_is_zero(u8 *in_edid, int length)
+{
+ int i;
+ u32 *raw_edid = (u32 *)in_edid;
+
+ for (i = 0; i < length / 4; i++)
+ if (*(raw_edid + i) != 0)
+ return false;
+ return true;
+}
+
static u8 *
drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
{
@@ -273,6 +284,10 @@
goto out;
if (drm_edid_block_valid(block))
break;
+ if (i == 0 && drm_edid_is_zero(block, EDID_LENGTH)) {
+ connector->null_edid_counter++;
+ goto carp;
+ }
}
if (i == 4)
goto carp;
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 74e4ff5..4012fe4 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -34,6 +34,7 @@
#include <linux/module.h>
#include <linux/mman.h>
#include <linux/pagemap.h>
+#include <linux/shmem_fs.h>
#include "drmP.h"
/** @file drm_gem.c
diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c
index d61d185..4a058c7 100644
--- a/drivers/gpu/drm/drm_ioc32.c
+++ b/drivers/gpu/drm/drm_ioc32.c
@@ -28,6 +28,7 @@
* IN THE SOFTWARE.
*/
#include <linux/compat.h>
+#include <linux/ratelimit.h>
#include "drmP.h"
#include "drm_core.h"
@@ -253,10 +254,10 @@
return -EFAULT;
m32.handle = (unsigned long)handle;
- if (m32.handle != (unsigned long)handle && printk_ratelimit())
- printk(KERN_ERR "compat_drm_addmap truncated handle"
- " %p for type %d offset %x\n",
- handle, m32.type, m32.offset);
+ if (m32.handle != (unsigned long)handle)
+ printk_ratelimited(KERN_ERR "compat_drm_addmap truncated handle"
+ " %p for type %d offset %x\n",
+ handle, m32.type, m32.offset);
if (copy_to_user(argp, &m32, sizeof(m32)))
return -EFAULT;
diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c
index e1aee4f..b6a19cb 100644
--- a/drivers/gpu/drm/drm_pci.c
+++ b/drivers/gpu/drm/drm_pci.c
@@ -251,7 +251,7 @@
}
-int drm_pci_irq_by_busid(struct drm_device *dev, struct drm_irq_busid *p)
+static int drm_pci_irq_by_busid(struct drm_device *dev, struct drm_irq_busid *p)
{
if ((p->busnum >> 8) != drm_get_pci_domain(dev) ||
(p->busnum & 0xff) != dev->pdev->bus->number ||
@@ -292,6 +292,7 @@
.get_name = drm_pci_get_name,
.set_busid = drm_pci_set_busid,
.set_unique = drm_pci_set_unique,
+ .irq_by_busid = drm_pci_irq_by_busid,
.agp_init = drm_pci_agp_init,
};
diff --git a/drivers/gpu/drm/drm_vm.c b/drivers/gpu/drm/drm_vm.c
index 2c3fcbd..5db96d45 100644
--- a/drivers/gpu/drm/drm_vm.c
+++ b/drivers/gpu/drm/drm_vm.c
@@ -526,7 +526,7 @@
static resource_size_t drm_core_get_reg_ofs(struct drm_device *dev)
{
#ifdef __alpha__
- return dev->hose->dense_mem_base - dev->hose->mem_space->start;
+ return dev->hose->dense_mem_base;
#else
return 0;
#endif
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 51c2257..0a893f7 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -776,7 +776,7 @@
seq_printf(m, " INSTPM: 0x%08x\n", error->instpm);
seq_printf(m, " seqno: 0x%08x\n", error->seqno);
- for (i = 0; i < 16; i++)
+ for (i = 0; i < dev_priv->num_fence_regs; i++)
seq_printf(m, " fence[%d] = %08llx\n", i, error->fence[i]);
if (error->active_bo)
@@ -1207,13 +1207,17 @@
if (ret)
return ret;
- seq_printf(m, "power context ");
- describe_obj(m, dev_priv->pwrctx);
- seq_printf(m, "\n");
+ if (dev_priv->pwrctx) {
+ seq_printf(m, "power context ");
+ describe_obj(m, dev_priv->pwrctx);
+ seq_printf(m, "\n");
+ }
- seq_printf(m, "render context ");
- describe_obj(m, dev_priv->renderctx);
- seq_printf(m, "\n");
+ if (dev_priv->renderctx) {
+ seq_printf(m, "render context ");
+ describe_obj(m, dev_priv->renderctx);
+ seq_printf(m, "\n");
+ }
mutex_unlock(&dev->mode_config.mutex);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 0239e99..296fbd6 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1266,30 +1266,6 @@
intel_modeset_gem_init(dev);
- if (IS_IVYBRIDGE(dev)) {
- /* Share pre & uninstall handlers with ILK/SNB */
- dev->driver->irq_handler = ivybridge_irq_handler;
- dev->driver->irq_preinstall = ironlake_irq_preinstall;
- dev->driver->irq_postinstall = ivybridge_irq_postinstall;
- dev->driver->irq_uninstall = ironlake_irq_uninstall;
- dev->driver->enable_vblank = ivybridge_enable_vblank;
- dev->driver->disable_vblank = ivybridge_disable_vblank;
- } else if (HAS_PCH_SPLIT(dev)) {
- dev->driver->irq_handler = ironlake_irq_handler;
- dev->driver->irq_preinstall = ironlake_irq_preinstall;
- dev->driver->irq_postinstall = ironlake_irq_postinstall;
- dev->driver->irq_uninstall = ironlake_irq_uninstall;
- dev->driver->enable_vblank = ironlake_enable_vblank;
- dev->driver->disable_vblank = ironlake_disable_vblank;
- } else {
- dev->driver->irq_preinstall = i915_driver_irq_preinstall;
- dev->driver->irq_postinstall = i915_driver_irq_postinstall;
- dev->driver->irq_uninstall = i915_driver_irq_uninstall;
- dev->driver->irq_handler = i915_driver_irq_handler;
- dev->driver->enable_vblank = i915_enable_vblank;
- dev->driver->disable_vblank = i915_disable_vblank;
- }
-
ret = drm_irq_install(dev);
if (ret)
goto cleanup_gem;
@@ -1967,7 +1943,7 @@
if (!dev_priv->mm.gtt) {
DRM_ERROR("Failed to initialize GTT\n");
ret = -ENODEV;
- goto out_iomapfree;
+ goto out_rmmap;
}
agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT;
@@ -2011,18 +1987,13 @@
if (dev_priv->wq == NULL) {
DRM_ERROR("Failed to create our workqueue.\n");
ret = -ENOMEM;
- goto out_iomapfree;
+ goto out_mtrrfree;
}
/* enable GEM by default */
dev_priv->has_gem = 1;
- dev->driver->get_vblank_counter = i915_get_vblank_counter;
- dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
- if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
- dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
- dev->driver->get_vblank_counter = gm45_get_vblank_counter;
- }
+ intel_irq_init(dev);
/* Try to make sure MCHBAR is enabled before poking at it */
intel_setup_mchbar(dev);
@@ -2103,13 +2074,21 @@
return 0;
out_gem_unload:
+ if (dev_priv->mm.inactive_shrinker.shrink)
+ unregister_shrinker(&dev_priv->mm.inactive_shrinker);
+
if (dev->pdev->msi_enabled)
pci_disable_msi(dev->pdev);
intel_teardown_gmbus(dev);
intel_teardown_mchbar(dev);
destroy_workqueue(dev_priv->wq);
-out_iomapfree:
+out_mtrrfree:
+ if (dev_priv->mm.gtt_mtrr >= 0) {
+ mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base,
+ dev->agp->agp_info.aper_size * 1024 * 1024);
+ dev_priv->mm.gtt_mtrr = -1;
+ }
io_mapping_free(dev_priv->mm.gtt_mapping);
out_rmmap:
pci_iounmap(dev->pdev, dev_priv->regs);
@@ -2182,9 +2161,8 @@
/* Flush any outstanding unpin_work. */
flush_workqueue(dev_priv->wq);
- i915_gem_free_all_phys_object(dev);
-
mutex_lock(&dev->struct_mutex);
+ i915_gem_free_all_phys_object(dev);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
if (I915_HAS_FBC(dev) && i915_powersave)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 0defd42..eb91e2d 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -52,7 +52,7 @@
unsigned int i915_semaphores = 0;
module_param_named(semaphores, i915_semaphores, int, 0600);
-unsigned int i915_enable_rc6 = 1;
+unsigned int i915_enable_rc6 = 0;
module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
unsigned int i915_enable_fbc = 0;
@@ -577,8 +577,12 @@
if (get_seconds() - dev_priv->last_gpu_reset < 5) {
DRM_ERROR("GPU hanging too fast, declaring wedged!\n");
} else switch (INTEL_INFO(dev)->gen) {
+ case 7:
case 6:
ret = gen6_do_reset(dev, flags);
+ /* If reset with a user forcewake, try to restore */
+ if (atomic_read(&dev_priv->forcewake_count))
+ __gen6_gt_force_wake_get(dev_priv);
break;
case 5:
ret = ironlake_do_reset(dev, flags);
@@ -762,14 +766,6 @@
.resume = i915_resume,
.device_is_agp = i915_driver_device_is_agp,
- .enable_vblank = i915_enable_vblank,
- .disable_vblank = i915_disable_vblank,
- .get_vblank_timestamp = i915_get_vblank_timestamp,
- .get_scanout_position = i915_get_crtc_scanoutpos,
- .irq_preinstall = i915_driver_irq_preinstall,
- .irq_postinstall = i915_driver_irq_postinstall,
- .irq_uninstall = i915_driver_irq_uninstall,
- .irq_handler = i915_driver_irq_handler,
.reclaim_buffers = drm_core_reclaim_buffers,
.master_create = i915_master_create,
.master_destroy = i915_master_destroy,
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ee66035..ce7914c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -211,6 +211,9 @@
void (*fdi_link_train)(struct drm_crtc *crtc);
void (*init_clock_gating)(struct drm_device *dev);
void (*init_pch_clock_gating)(struct drm_device *dev);
+ int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj);
/* clock updates for mode set */
/* cursor updates */
/* render clock increase/decrease */
@@ -259,6 +262,7 @@
};
#define QUIRK_PIPEA_FORCE (1<<0)
+#define QUIRK_LVDS_SSC_DISABLE (1<<1)
struct intel_fbdev;
@@ -716,6 +720,7 @@
struct intel_fbdev *fbdev;
struct drm_property *broadcast_rgb_property;
+ struct drm_property *force_audio_property;
atomic_t forcewake_count;
} drm_i915_private_t;
@@ -909,13 +914,6 @@
} mm;
};
-enum intel_chip_family {
- CHIP_I8XX = 0x01,
- CHIP_I9XX = 0x02,
- CHIP_I915 = 0x04,
- CHIP_I965 = 0x08,
-};
-
#define INTEL_INFO(dev) (((struct drm_i915_private *) (dev)->dev_private)->info)
#define IS_I830(dev) ((dev)->pci_device == 0x3577)
@@ -1000,8 +998,6 @@
extern int i915_suspend(struct drm_device *dev, pm_message_t state);
extern int i915_resume(struct drm_device *dev);
-extern void i915_save_display(struct drm_device *dev);
-extern void i915_restore_display(struct drm_device *dev);
extern int i915_master_create(struct drm_device *dev, struct drm_master *master);
extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master);
@@ -1036,33 +1032,12 @@
extern int i915_irq_wait(struct drm_device *dev, void *data,
struct drm_file *file_priv);
-extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
-extern void i915_driver_irq_preinstall(struct drm_device * dev);
-extern int i915_driver_irq_postinstall(struct drm_device *dev);
-extern void i915_driver_irq_uninstall(struct drm_device * dev);
-
-extern irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS);
-extern void ironlake_irq_preinstall(struct drm_device *dev);
-extern int ironlake_irq_postinstall(struct drm_device *dev);
-extern void ironlake_irq_uninstall(struct drm_device *dev);
-
-extern irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS);
-extern void ivybridge_irq_preinstall(struct drm_device *dev);
-extern int ivybridge_irq_postinstall(struct drm_device *dev);
-extern void ivybridge_irq_uninstall(struct drm_device *dev);
+extern void intel_irq_init(struct drm_device *dev);
extern int i915_vblank_pipe_set(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int i915_vblank_pipe_get(struct drm_device *dev, void *data,
struct drm_file *file_priv);
-extern int i915_enable_vblank(struct drm_device *dev, int crtc);
-extern void i915_disable_vblank(struct drm_device *dev, int crtc);
-extern int ironlake_enable_vblank(struct drm_device *dev, int crtc);
-extern void ironlake_disable_vblank(struct drm_device *dev, int crtc);
-extern int ivybridge_enable_vblank(struct drm_device *dev, int crtc);
-extern void ivybridge_disable_vblank(struct drm_device *dev, int crtc);
-extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc);
-extern u32 gm45_get_vblank_counter(struct drm_device *dev, int crtc);
extern int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv);
@@ -1073,13 +1048,6 @@
i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
void intel_enable_asle (struct drm_device *dev);
-int i915_get_vblank_timestamp(struct drm_device *dev, int crtc,
- int *max_error,
- struct timeval *vblank_time,
- unsigned flags);
-
-int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
- int *vpos, int *hpos);
#ifdef CONFIG_DEBUG_FS
extern void i915_destroy_error_state(struct drm_device *dev);
@@ -1227,7 +1195,9 @@
void i915_gem_release(struct drm_device *dev, struct drm_file *file);
uint32_t
-i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj);
+i915_gem_get_unfenced_gtt_alignment(struct drm_device *dev,
+ uint32_t size,
+ int tiling_mode);
/* i915_gem_gtt.c */
void i915_gem_restore_gtt_mappings(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 0b2e167..a087e1b 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -31,6 +31,7 @@
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
+#include <linux/shmem_fs.h>
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/pci.h>
@@ -354,13 +355,12 @@
* page_offset = offset within page
* page_length = bytes to copy for this page
*/
- page_offset = offset & (PAGE_SIZE-1);
+ page_offset = offset_in_page(offset);
page_length = remain;
if ((page_offset + remain) > PAGE_SIZE)
page_length = PAGE_SIZE - page_offset;
- page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
- GFP_HIGHUSER | __GFP_RECLAIMABLE);
+ page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
if (IS_ERR(page))
return PTR_ERR(page);
@@ -453,9 +453,9 @@
* data_page_offset = offset with data_page_index page.
* page_length = bytes to copy for this page
*/
- shmem_page_offset = offset & ~PAGE_MASK;
+ shmem_page_offset = offset_in_page(offset);
data_page_index = data_ptr / PAGE_SIZE - first_data_page;
- data_page_offset = data_ptr & ~PAGE_MASK;
+ data_page_offset = offset_in_page(data_ptr);
page_length = remain;
if ((shmem_page_offset + page_length) > PAGE_SIZE)
@@ -463,10 +463,11 @@
if ((data_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - data_page_offset;
- page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
- GFP_HIGHUSER | __GFP_RECLAIMABLE);
- if (IS_ERR(page))
- return PTR_ERR(page);
+ page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
+ if (IS_ERR(page)) {
+ ret = PTR_ERR(page);
+ goto out;
+ }
if (do_bit17_swizzling) {
slow_shmem_bit17_copy(page,
@@ -638,8 +639,8 @@
* page_offset = offset within page
* page_length = bytes to copy for this page
*/
- page_base = (offset & ~(PAGE_SIZE-1));
- page_offset = offset & (PAGE_SIZE-1);
+ page_base = offset & PAGE_MASK;
+ page_offset = offset_in_page(offset);
page_length = remain;
if ((page_offset + remain) > PAGE_SIZE)
page_length = PAGE_SIZE - page_offset;
@@ -650,7 +651,6 @@
*/
if (fast_user_write(dev_priv->mm.gtt_mapping, page_base,
page_offset, user_data, page_length))
-
return -EFAULT;
remain -= page_length;
@@ -730,9 +730,9 @@
* page_length = bytes to copy for this page
*/
gtt_page_base = offset & PAGE_MASK;
- gtt_page_offset = offset & ~PAGE_MASK;
+ gtt_page_offset = offset_in_page(offset);
data_page_index = data_ptr / PAGE_SIZE - first_data_page;
- data_page_offset = data_ptr & ~PAGE_MASK;
+ data_page_offset = offset_in_page(data_ptr);
page_length = remain;
if ((gtt_page_offset + page_length) > PAGE_SIZE)
@@ -791,13 +791,12 @@
* page_offset = offset within page
* page_length = bytes to copy for this page
*/
- page_offset = offset & (PAGE_SIZE-1);
+ page_offset = offset_in_page(offset);
page_length = remain;
if ((page_offset + remain) > PAGE_SIZE)
page_length = PAGE_SIZE - page_offset;
- page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
- GFP_HIGHUSER | __GFP_RECLAIMABLE);
+ page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
if (IS_ERR(page))
return PTR_ERR(page);
@@ -896,9 +895,9 @@
* data_page_offset = offset with data_page_index page.
* page_length = bytes to copy for this page
*/
- shmem_page_offset = offset & ~PAGE_MASK;
+ shmem_page_offset = offset_in_page(offset);
data_page_index = data_ptr / PAGE_SIZE - first_data_page;
- data_page_offset = data_ptr & ~PAGE_MASK;
+ data_page_offset = offset_in_page(data_ptr);
page_length = remain;
if ((shmem_page_offset + page_length) > PAGE_SIZE)
@@ -906,8 +905,7 @@
if ((data_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - data_page_offset;
- page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
- GFP_HIGHUSER | __GFP_RECLAIMABLE);
+ page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
goto out;
@@ -1218,11 +1216,11 @@
ret = i915_gem_object_bind_to_gtt(obj, 0, true);
if (ret)
goto unlock;
- }
- ret = i915_gem_object_set_to_gtt_domain(obj, write);
- if (ret)
- goto unlock;
+ ret = i915_gem_object_set_to_gtt_domain(obj, write);
+ if (ret)
+ goto unlock;
+ }
if (obj->tiling_mode == I915_TILING_NONE)
ret = i915_gem_object_put_fence(obj);
@@ -1376,25 +1374,24 @@
}
static uint32_t
-i915_gem_get_gtt_size(struct drm_i915_gem_object *obj)
+i915_gem_get_gtt_size(struct drm_device *dev, uint32_t size, int tiling_mode)
{
- struct drm_device *dev = obj->base.dev;
- uint32_t size;
+ uint32_t gtt_size;
if (INTEL_INFO(dev)->gen >= 4 ||
- obj->tiling_mode == I915_TILING_NONE)
- return obj->base.size;
+ tiling_mode == I915_TILING_NONE)
+ return size;
/* Previous chips need a power-of-two fence region when tiling */
if (INTEL_INFO(dev)->gen == 3)
- size = 1024*1024;
+ gtt_size = 1024*1024;
else
- size = 512*1024;
+ gtt_size = 512*1024;
- while (size < obj->base.size)
- size <<= 1;
+ while (gtt_size < size)
+ gtt_size <<= 1;
- return size;
+ return gtt_size;
}
/**
@@ -1405,58 +1402,52 @@
* potential fence register mapping.
*/
static uint32_t
-i915_gem_get_gtt_alignment(struct drm_i915_gem_object *obj)
+i915_gem_get_gtt_alignment(struct drm_device *dev,
+ uint32_t size,
+ int tiling_mode)
{
- struct drm_device *dev = obj->base.dev;
-
/*
* Minimum alignment is 4k (GTT page size), but might be greater
* if a fence register is needed for the object.
*/
if (INTEL_INFO(dev)->gen >= 4 ||
- obj->tiling_mode == I915_TILING_NONE)
+ tiling_mode == I915_TILING_NONE)
return 4096;
/*
* Previous chips need to be aligned to the size of the smallest
* fence register that can contain the object.
*/
- return i915_gem_get_gtt_size(obj);
+ return i915_gem_get_gtt_size(dev, size, tiling_mode);
}
/**
* i915_gem_get_unfenced_gtt_alignment - return required GTT alignment for an
* unfenced object
- * @obj: object to check
+ * @dev: the device
+ * @size: size of the object
+ * @tiling_mode: tiling mode of the object
*
* Return the required GTT alignment for an object, only taking into account
* unfenced tiled surface requirements.
*/
uint32_t
-i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj)
+i915_gem_get_unfenced_gtt_alignment(struct drm_device *dev,
+ uint32_t size,
+ int tiling_mode)
{
- struct drm_device *dev = obj->base.dev;
- int tile_height;
-
/*
* Minimum alignment is 4k (GTT page size) for sane hw.
*/
if (INTEL_INFO(dev)->gen >= 4 || IS_G33(dev) ||
- obj->tiling_mode == I915_TILING_NONE)
+ tiling_mode == I915_TILING_NONE)
return 4096;
- /*
- * Older chips need unfenced tiled buffers to be aligned to the left
- * edge of an even tile row (where tile rows are counted as if the bo is
- * placed in a fenced gtt region).
+ /* Previous hardware however needs to be aligned to a power-of-two
+ * tile height. The simplest method for determining this is to reuse
+ * the power-of-tile object size.
*/
- if (IS_GEN2(dev) ||
- (obj->tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
- tile_height = 32;
- else
- tile_height = 8;
-
- return tile_height * obj->stride * 2;
+ return i915_gem_get_gtt_size(dev, size, tiling_mode);
}
int
@@ -1556,12 +1547,10 @@
inode = obj->base.filp->f_path.dentry->d_inode;
mapping = inode->i_mapping;
+ gfpmask |= mapping_gfp_mask(mapping);
+
for (i = 0; i < page_count; i++) {
- page = read_cache_page_gfp(mapping, i,
- GFP_HIGHUSER |
- __GFP_COLD |
- __GFP_RECLAIMABLE |
- gfpmask);
+ page = shmem_read_mapping_page_gfp(mapping, i, gfpmask);
if (IS_ERR(page))
goto err_pages;
@@ -1699,13 +1688,10 @@
/* Our goal here is to return as much of the memory as
* is possible back to the system as we are called from OOM.
* To do this we must instruct the shmfs to drop all of its
- * backing pages, *now*. Here we mirror the actions taken
- * when by shmem_delete_inode() to release the backing store.
+ * backing pages, *now*.
*/
inode = obj->base.filp->f_path.dentry->d_inode;
- truncate_inode_pages(inode->i_mapping, 0);
- if (inode->i_op->truncate_range)
- inode->i_op->truncate_range(inode, 0, (loff_t)-1);
+ shmem_truncate_range(inode, 0, (loff_t)-1);
obj->madv = __I915_MADV_PURGED;
}
@@ -2078,8 +2064,8 @@
if (!ier) {
DRM_ERROR("something (likely vbetool) disabled "
"interrupts, re-enabling\n");
- i915_driver_irq_preinstall(ring->dev);
- i915_driver_irq_postinstall(ring->dev);
+ ring->dev->driver->irq_preinstall(ring->dev);
+ ring->dev->driver->irq_postinstall(ring->dev);
}
trace_i915_gem_request_wait_begin(ring, seqno);
@@ -2750,9 +2736,16 @@
return -EINVAL;
}
- fence_size = i915_gem_get_gtt_size(obj);
- fence_alignment = i915_gem_get_gtt_alignment(obj);
- unfenced_alignment = i915_gem_get_unfenced_gtt_alignment(obj);
+ fence_size = i915_gem_get_gtt_size(dev,
+ obj->base.size,
+ obj->tiling_mode);
+ fence_alignment = i915_gem_get_gtt_alignment(dev,
+ obj->base.size,
+ obj->tiling_mode);
+ unfenced_alignment =
+ i915_gem_get_unfenced_gtt_alignment(dev,
+ obj->base.size,
+ obj->tiling_mode);
if (alignment == 0)
alignment = map_and_fenceable ? fence_alignment :
@@ -2924,8 +2917,6 @@
*/
wmb();
- i915_gem_release_mmap(obj);
-
old_write_domain = obj->base.write_domain;
obj->base.write_domain = 0;
@@ -3565,6 +3556,7 @@
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj;
+ struct address_space *mapping;
obj = kzalloc(sizeof(*obj), GFP_KERNEL);
if (obj == NULL)
@@ -3575,6 +3567,9 @@
return NULL;
}
+ mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
+ mapping_set_gfp_mask(mapping, GFP_HIGHUSER | __GFP_RECLAIMABLE);
+
i915_gem_info_add_obj(dev_priv, size);
obj->base.write_domain = I915_GEM_DOMAIN_CPU;
@@ -3950,8 +3945,7 @@
page_count = obj->base.size / PAGE_SIZE;
for (i = 0; i < page_count; i++) {
- struct page *page = read_cache_page_gfp(mapping, i,
- GFP_HIGHUSER | __GFP_RECLAIMABLE);
+ struct page *page = shmem_read_mapping_page(mapping, i);
if (!IS_ERR(page)) {
char *dst = kmap_atomic(page);
memcpy(dst, vaddr + i*PAGE_SIZE, PAGE_SIZE);
@@ -4012,8 +4006,7 @@
struct page *page;
char *dst, *src;
- page = read_cache_page_gfp(mapping, i,
- GFP_HIGHUSER | __GFP_RECLAIMABLE);
+ page = shmem_read_mapping_page(mapping, i);
if (IS_ERR(page))
return PTR_ERR(page);
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 20a4cc5..4934cf8 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -187,10 +187,6 @@
if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU)
i915_gem_clflush_object(obj);
- /* blow away mappings if mapped through GTT */
- if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_GTT)
- i915_gem_release_mmap(obj);
-
if (obj->base.pending_write_domain)
cd->flips |= atomic_read(&obj->pending_flip);
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 82d70fd..99c4faa 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -348,7 +348,9 @@
/* Rebind if we need a change of alignment */
if (!obj->map_and_fenceable) {
u32 unfenced_alignment =
- i915_gem_get_unfenced_gtt_alignment(obj);
+ i915_gem_get_unfenced_gtt_alignment(dev,
+ obj->base.size,
+ args->tiling_mode);
if (obj->gtt_offset & (unfenced_alignment - 1))
ret = i915_gem_object_unbind(obj);
}
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b79619a..3b03f85 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -152,7 +152,7 @@
/* Called from drm generic code, passed a 'crtc', which
* we use as a pipe index
*/
-u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
+static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long high_frame;
@@ -184,7 +184,7 @@
return (high1 << 8) | low;
}
-u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
+static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int reg = PIPE_FRMCOUNT_GM45(pipe);
@@ -198,7 +198,7 @@
return I915_READ(reg);
}
-int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
+static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
int *vpos, int *hpos)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -264,7 +264,7 @@
return ret;
}
-int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
+static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
int *max_error,
struct timeval *vblank_time,
unsigned flags)
@@ -462,7 +462,7 @@
DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n");
}
-irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)
+static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -517,7 +517,7 @@
if (de_iir & DE_PIPEA_VBLANK_IVB)
drm_handle_vblank(dev, 0);
- if (de_iir & DE_PIPEB_VBLANK_IVB);
+ if (de_iir & DE_PIPEB_VBLANK_IVB)
drm_handle_vblank(dev, 1);
/* check event from PCH */
@@ -550,7 +550,7 @@
return ret;
}
-irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
+static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -1209,7 +1209,7 @@
}
}
-irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
+static irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -1454,7 +1454,7 @@
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
-int i915_enable_vblank(struct drm_device *dev, int pipe)
+static int i915_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
@@ -1478,7 +1478,7 @@
return 0;
}
-int ironlake_enable_vblank(struct drm_device *dev, int pipe)
+static int ironlake_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
@@ -1494,7 +1494,7 @@
return 0;
}
-int ivybridge_enable_vblank(struct drm_device *dev, int pipe)
+static int ivybridge_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
@@ -1513,7 +1513,7 @@
/* Called from drm generic code, passed 'crtc' which
* we use as a pipe index
*/
-void i915_disable_vblank(struct drm_device *dev, int pipe)
+static void i915_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
@@ -1529,7 +1529,7 @@
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
-void ironlake_disable_vblank(struct drm_device *dev, int pipe)
+static void ironlake_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
@@ -1540,7 +1540,7 @@
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
-void ivybridge_disable_vblank(struct drm_device *dev, int pipe)
+static void ivybridge_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
unsigned long irqflags;
@@ -1728,7 +1728,7 @@
/* drm_dma.h hooks
*/
-void ironlake_irq_preinstall(struct drm_device *dev)
+static void ironlake_irq_preinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -1740,6 +1740,17 @@
INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work);
I915_WRITE(HWSTAM, 0xeffe);
+ if (IS_GEN6(dev) || IS_GEN7(dev)) {
+ /* Workaround stalls observed on Sandy Bridge GPUs by
+ * making the blitter command streamer generate a
+ * write to the Hardware Status Page for
+ * MI_USER_INTERRUPT. This appears to serialize the
+ * previous seqno write out before the interrupt
+ * happens.
+ */
+ I915_WRITE(GEN6_BLITTER_HWSTAM, ~GEN6_BLITTER_USER_INTERRUPT);
+ I915_WRITE(GEN6_BSD_HWSTAM, ~GEN6_BSD_USER_INTERRUPT);
+ }
/* XXX hotplug from PCH */
@@ -1758,7 +1769,7 @@
POSTING_READ(SDEIER);
}
-int ironlake_irq_postinstall(struct drm_device *dev)
+static int ironlake_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
/* enable kind of interrupts always enabled */
@@ -1830,7 +1841,7 @@
return 0;
}
-int ivybridge_irq_postinstall(struct drm_device *dev)
+static int ivybridge_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
/* enable kind of interrupts always enabled */
@@ -1880,7 +1891,7 @@
return 0;
}
-void i915_driver_irq_preinstall(struct drm_device * dev)
+static void i915_driver_irq_preinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
@@ -1907,7 +1918,7 @@
* Must be called after intel_modeset_init or hotplug interrupts won't be
* enabled correctly.
*/
-int i915_driver_irq_postinstall(struct drm_device *dev)
+static int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR;
@@ -1983,7 +1994,7 @@
return 0;
}
-void ironlake_irq_uninstall(struct drm_device *dev)
+static void ironlake_irq_uninstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
@@ -2003,7 +2014,7 @@
I915_WRITE(GTIIR, I915_READ(GTIIR));
}
-void i915_driver_irq_uninstall(struct drm_device * dev)
+static void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
int pipe;
@@ -2029,3 +2040,41 @@
I915_READ(PIPESTAT(pipe)) & 0x8000ffff);
I915_WRITE(IIR, I915_READ(IIR));
}
+
+void intel_irq_init(struct drm_device *dev)
+{
+ dev->driver->get_vblank_counter = i915_get_vblank_counter;
+ dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
+ if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
+ dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
+ dev->driver->get_vblank_counter = gm45_get_vblank_counter;
+ }
+
+
+ dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
+ dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
+
+ if (IS_IVYBRIDGE(dev)) {
+ /* Share pre & uninstall handlers with ILK/SNB */
+ dev->driver->irq_handler = ivybridge_irq_handler;
+ dev->driver->irq_preinstall = ironlake_irq_preinstall;
+ dev->driver->irq_postinstall = ivybridge_irq_postinstall;
+ dev->driver->irq_uninstall = ironlake_irq_uninstall;
+ dev->driver->enable_vblank = ivybridge_enable_vblank;
+ dev->driver->disable_vblank = ivybridge_disable_vblank;
+ } else if (HAS_PCH_SPLIT(dev)) {
+ dev->driver->irq_handler = ironlake_irq_handler;
+ dev->driver->irq_preinstall = ironlake_irq_preinstall;
+ dev->driver->irq_postinstall = ironlake_irq_postinstall;
+ dev->driver->irq_uninstall = ironlake_irq_uninstall;
+ dev->driver->enable_vblank = ironlake_enable_vblank;
+ dev->driver->disable_vblank = ironlake_disable_vblank;
+ } else {
+ dev->driver->irq_preinstall = i915_driver_irq_preinstall;
+ dev->driver->irq_postinstall = i915_driver_irq_postinstall;
+ dev->driver->irq_uninstall = i915_driver_irq_uninstall;
+ dev->driver->irq_handler = i915_driver_irq_handler;
+ dev->driver->enable_vblank = i915_enable_vblank;
+ dev->driver->disable_vblank = i915_disable_vblank;
+ }
+}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2f967af..5d5def7 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -531,6 +531,7 @@
#define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE 0
#define GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR (1 << 3)
+#define GEN6_BSD_HWSTAM 0x12098
#define GEN6_BSD_IMR 0x120a8
#define GEN6_BSD_USER_INTERRUPT (1 << 12)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 60a94d2..5257cfc 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -597,7 +597,7 @@
return;
}
-void i915_save_display(struct drm_device *dev)
+static void i915_save_display(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -689,7 +689,7 @@
i915_save_vga(dev);
}
-void i915_restore_display(struct drm_device *dev)
+static void i915_restore_display(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -780,6 +780,7 @@
I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL);
else
I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
+
I915_WRITE(VGA0, dev_priv->saveVGA0);
I915_WRITE(VGA1, dev_priv->saveVGA1);
I915_WRITE(VGA_PD, dev_priv->saveVGA_PD);
@@ -796,6 +797,8 @@
pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+ mutex_lock(&dev->struct_mutex);
+
/* Hardware status page */
dev_priv->saveHWS = I915_READ(HWS_PGA);
@@ -835,6 +838,8 @@
for (i = 0; i < 3; i++)
dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
+ mutex_unlock(&dev->struct_mutex);
+
return 0;
}
@@ -845,6 +850,8 @@
pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
+ mutex_lock(&dev->struct_mutex);
+
/* Hardware status page */
I915_WRITE(HWS_PGA, dev_priv->saveHWS);
@@ -862,6 +869,7 @@
I915_WRITE(IER, dev_priv->saveIER);
I915_WRITE(IMR, dev_priv->saveIMR);
}
+ mutex_unlock(&dev->struct_mutex);
intel_init_clock_gating(dev);
@@ -873,6 +881,8 @@
if (IS_GEN6(dev))
gen6_enable_rps(dev_priv);
+ mutex_lock(&dev->struct_mutex);
+
/* Cache mode state */
I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);
@@ -886,6 +896,8 @@
for (i = 0; i < 3; i++)
I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
+ mutex_unlock(&dev->struct_mutex);
+
intel_i2c_reset(dev);
return 0;
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index e93f93c..0979d88 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -288,6 +288,8 @@
* This may be a DVI-I connector with a shared DDC
* link between analog and digital outputs, so we
* have to check the EDID input spec of the attached device.
+ *
+ * On the other hand, what should we do if it is a broken EDID?
*/
if (edid != NULL) {
is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
@@ -298,6 +300,8 @@
if (!is_digital) {
DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
return true;
+ } else {
+ DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
}
}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f553ddfd..0f1c799 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3983,54 +3983,6 @@
#define ILK_LP0_PLANE_LATENCY 700
#define ILK_LP0_CURSOR_LATENCY 1300
-static bool ironlake_compute_wm0(struct drm_device *dev,
- int pipe,
- const struct intel_watermark_params *display,
- int display_latency_ns,
- const struct intel_watermark_params *cursor,
- int cursor_latency_ns,
- int *plane_wm,
- int *cursor_wm)
-{
- struct drm_crtc *crtc;
- int htotal, hdisplay, clock, pixel_size;
- int line_time_us, line_count;
- int entries, tlb_miss;
-
- crtc = intel_get_crtc_for_pipe(dev, pipe);
- if (crtc->fb == NULL || !crtc->enabled)
- return false;
-
- htotal = crtc->mode.htotal;
- hdisplay = crtc->mode.hdisplay;
- clock = crtc->mode.clock;
- pixel_size = crtc->fb->bits_per_pixel / 8;
-
- /* Use the small buffer method to calculate plane watermark */
- entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
- tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8;
- if (tlb_miss > 0)
- entries += tlb_miss;
- entries = DIV_ROUND_UP(entries, display->cacheline_size);
- *plane_wm = entries + display->guard_size;
- if (*plane_wm > (int)display->max_wm)
- *plane_wm = display->max_wm;
-
- /* Use the large buffer method to calculate cursor watermark */
- line_time_us = ((htotal * 1000) / clock);
- line_count = (cursor_latency_ns / line_time_us + 1000) / 1000;
- entries = line_count * 64 * pixel_size;
- tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8;
- if (tlb_miss > 0)
- entries += tlb_miss;
- entries = DIV_ROUND_UP(entries, cursor->cacheline_size);
- *cursor_wm = entries + cursor->guard_size;
- if (*cursor_wm > (int)cursor->max_wm)
- *cursor_wm = (int)cursor->max_wm;
-
- return true;
-}
-
/*
* Check the wm result.
*
@@ -4139,12 +4091,12 @@
unsigned int enabled;
enabled = 0;
- if (ironlake_compute_wm0(dev, 0,
- &ironlake_display_wm_info,
- ILK_LP0_PLANE_LATENCY,
- &ironlake_cursor_wm_info,
- ILK_LP0_CURSOR_LATENCY,
- &plane_wm, &cursor_wm)) {
+ if (g4x_compute_wm0(dev, 0,
+ &ironlake_display_wm_info,
+ ILK_LP0_PLANE_LATENCY,
+ &ironlake_cursor_wm_info,
+ ILK_LP0_CURSOR_LATENCY,
+ &plane_wm, &cursor_wm)) {
I915_WRITE(WM0_PIPEA_ILK,
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
@@ -4153,12 +4105,12 @@
enabled |= 1;
}
- if (ironlake_compute_wm0(dev, 1,
- &ironlake_display_wm_info,
- ILK_LP0_PLANE_LATENCY,
- &ironlake_cursor_wm_info,
- ILK_LP0_CURSOR_LATENCY,
- &plane_wm, &cursor_wm)) {
+ if (g4x_compute_wm0(dev, 1,
+ &ironlake_display_wm_info,
+ ILK_LP0_PLANE_LATENCY,
+ &ironlake_cursor_wm_info,
+ ILK_LP0_CURSOR_LATENCY,
+ &plane_wm, &cursor_wm)) {
I915_WRITE(WM0_PIPEB_ILK,
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
@@ -4223,10 +4175,10 @@
unsigned int enabled;
enabled = 0;
- if (ironlake_compute_wm0(dev, 0,
- &sandybridge_display_wm_info, latency,
- &sandybridge_cursor_wm_info, latency,
- &plane_wm, &cursor_wm)) {
+ if (g4x_compute_wm0(dev, 0,
+ &sandybridge_display_wm_info, latency,
+ &sandybridge_cursor_wm_info, latency,
+ &plane_wm, &cursor_wm)) {
I915_WRITE(WM0_PIPEA_ILK,
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
@@ -4235,10 +4187,10 @@
enabled |= 1;
}
- if (ironlake_compute_wm0(dev, 1,
- &sandybridge_display_wm_info, latency,
- &sandybridge_cursor_wm_info, latency,
- &plane_wm, &cursor_wm)) {
+ if (g4x_compute_wm0(dev, 1,
+ &sandybridge_display_wm_info, latency,
+ &sandybridge_cursor_wm_info, latency,
+ &plane_wm, &cursor_wm)) {
I915_WRITE(WM0_PIPEB_ILK,
(plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
@@ -4353,7 +4305,8 @@
static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
{
- return dev_priv->lvds_use_ssc && i915_panel_use_ssc;
+ return dev_priv->lvds_use_ssc && i915_panel_use_ssc
+ && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
}
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
@@ -4735,6 +4688,7 @@
I915_WRITE(DSPCNTR(plane), dspcntr);
POSTING_READ(DSPCNTR(plane));
+ intel_enable_plane(dev_priv, plane, pipe);
ret = intel_pipe_set_base(crtc, x, y, old_fb);
@@ -5265,8 +5219,6 @@
I915_WRITE(DSPCNTR(plane), dspcntr);
POSTING_READ(DSPCNTR(plane));
- if (!HAS_PCH_SPLIT(dev))
- intel_enable_plane(dev_priv, plane, pipe);
ret = intel_pipe_set_base(crtc, x, y, old_fb);
@@ -6310,6 +6262,197 @@
spin_unlock_irqrestore(&dev->event_lock, flags);
}
+static int intel_gen2_queue_flip(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ unsigned long offset;
+ u32 flip_mask;
+ int ret;
+
+ ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+ if (ret)
+ goto out;
+
+ /* Offset into the new buffer for cases of shared fbs between CRTCs */
+ offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8;
+
+ ret = BEGIN_LP_RING(6);
+ if (ret)
+ goto out;
+
+ /* Can't queue multiple flips, so wait for the previous
+ * one to finish before executing the next.
+ */
+ if (intel_crtc->plane)
+ flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
+ else
+ flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
+ OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
+ OUT_RING(MI_NOOP);
+ OUT_RING(MI_DISPLAY_FLIP |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch);
+ OUT_RING(obj->gtt_offset + offset);
+ OUT_RING(MI_NOOP);
+ ADVANCE_LP_RING();
+out:
+ return ret;
+}
+
+static int intel_gen3_queue_flip(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ unsigned long offset;
+ u32 flip_mask;
+ int ret;
+
+ ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+ if (ret)
+ goto out;
+
+ /* Offset into the new buffer for cases of shared fbs between CRTCs */
+ offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8;
+
+ ret = BEGIN_LP_RING(6);
+ if (ret)
+ goto out;
+
+ if (intel_crtc->plane)
+ flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
+ else
+ flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
+ OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
+ OUT_RING(MI_NOOP);
+ OUT_RING(MI_DISPLAY_FLIP_I915 |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch);
+ OUT_RING(obj->gtt_offset + offset);
+ OUT_RING(MI_NOOP);
+
+ ADVANCE_LP_RING();
+out:
+ return ret;
+}
+
+static int intel_gen4_queue_flip(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ uint32_t pf, pipesrc;
+ int ret;
+
+ ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+ if (ret)
+ goto out;
+
+ ret = BEGIN_LP_RING(4);
+ if (ret)
+ goto out;
+
+ /* i965+ uses the linear or tiled offsets from the
+ * Display Registers (which do not change across a page-flip)
+ * so we need only reprogram the base address.
+ */
+ OUT_RING(MI_DISPLAY_FLIP |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch);
+ OUT_RING(obj->gtt_offset | obj->tiling_mode);
+
+ /* XXX Enabling the panel-fitter across page-flip is so far
+ * untested on non-native modes, so ignore it for now.
+ * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
+ */
+ pf = 0;
+ pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
+ OUT_RING(pf | pipesrc);
+ ADVANCE_LP_RING();
+out:
+ return ret;
+}
+
+static int intel_gen6_queue_flip(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ uint32_t pf, pipesrc;
+ int ret;
+
+ ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+ if (ret)
+ goto out;
+
+ ret = BEGIN_LP_RING(4);
+ if (ret)
+ goto out;
+
+ OUT_RING(MI_DISPLAY_FLIP |
+ MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+ OUT_RING(fb->pitch | obj->tiling_mode);
+ OUT_RING(obj->gtt_offset);
+
+ pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
+ pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
+ OUT_RING(pf | pipesrc);
+ ADVANCE_LP_RING();
+out:
+ return ret;
+}
+
+/*
+ * On gen7 we currently use the blit ring because (in early silicon at least)
+ * the render ring doesn't give us interrpts for page flip completion, which
+ * means clients will hang after the first flip is queued. Fortunately the
+ * blit ring generates interrupts properly, so use it instead.
+ */
+static int intel_gen7_queue_flip(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
+ int ret;
+
+ ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
+ if (ret)
+ goto out;
+
+ ret = intel_ring_begin(ring, 4);
+ if (ret)
+ goto out;
+
+ intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
+ intel_ring_emit(ring, (fb->pitch | obj->tiling_mode));
+ intel_ring_emit(ring, (obj->gtt_offset));
+ intel_ring_emit(ring, (MI_NOOP));
+ intel_ring_advance(ring);
+out:
+ return ret;
+}
+
+static int intel_default_queue_flip(struct drm_device *dev,
+ struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_i915_gem_object *obj)
+{
+ return -ENODEV;
+}
+
static int intel_crtc_page_flip(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event)
@@ -6320,9 +6463,7 @@
struct drm_i915_gem_object *obj;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_unpin_work *work;
- unsigned long flags, offset;
- int pipe = intel_crtc->pipe;
- u32 pf, pipesrc;
+ unsigned long flags;
int ret;
work = kzalloc(sizeof *work, GFP_KERNEL);
@@ -6351,9 +6492,6 @@
obj = intel_fb->obj;
mutex_lock(&dev->struct_mutex);
- ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
- if (ret)
- goto cleanup_work;
/* Reference the objects for the scheduled work. */
drm_gem_object_reference(&work->old_fb_obj->base);
@@ -6365,91 +6503,18 @@
if (ret)
goto cleanup_objs;
- if (IS_GEN3(dev) || IS_GEN2(dev)) {
- u32 flip_mask;
-
- /* Can't queue multiple flips, so wait for the previous
- * one to finish before executing the next.
- */
- ret = BEGIN_LP_RING(2);
- if (ret)
- goto cleanup_objs;
-
- if (intel_crtc->plane)
- flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
- else
- flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
- OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
- OUT_RING(MI_NOOP);
- ADVANCE_LP_RING();
- }
-
work->pending_flip_obj = obj;
work->enable_stall_check = true;
- /* Offset into the new buffer for cases of shared fbs between CRTCs */
- offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8;
-
- ret = BEGIN_LP_RING(4);
- if (ret)
- goto cleanup_objs;
-
/* Block clients from rendering to the new back buffer until
* the flip occurs and the object is no longer visible.
*/
atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
- switch (INTEL_INFO(dev)->gen) {
- case 2:
- OUT_RING(MI_DISPLAY_FLIP |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- OUT_RING(fb->pitch);
- OUT_RING(obj->gtt_offset + offset);
- OUT_RING(MI_NOOP);
- break;
-
- case 3:
- OUT_RING(MI_DISPLAY_FLIP_I915 |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- OUT_RING(fb->pitch);
- OUT_RING(obj->gtt_offset + offset);
- OUT_RING(MI_NOOP);
- break;
-
- case 4:
- case 5:
- /* i965+ uses the linear or tiled offsets from the
- * Display Registers (which do not change across a page-flip)
- * so we need only reprogram the base address.
- */
- OUT_RING(MI_DISPLAY_FLIP |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- OUT_RING(fb->pitch);
- OUT_RING(obj->gtt_offset | obj->tiling_mode);
-
- /* XXX Enabling the panel-fitter across page-flip is so far
- * untested on non-native modes, so ignore it for now.
- * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
- */
- pf = 0;
- pipesrc = I915_READ(PIPESRC(pipe)) & 0x0fff0fff;
- OUT_RING(pf | pipesrc);
- break;
-
- case 6:
- case 7:
- OUT_RING(MI_DISPLAY_FLIP |
- MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
- OUT_RING(fb->pitch | obj->tiling_mode);
- OUT_RING(obj->gtt_offset);
-
- pf = I915_READ(PF_CTL(pipe)) & PF_ENABLE;
- pipesrc = I915_READ(PIPESRC(pipe)) & 0x0fff0fff;
- OUT_RING(pf | pipesrc);
- break;
- }
- ADVANCE_LP_RING();
+ ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
+ if (ret)
+ goto cleanup_pending;
mutex_unlock(&dev->struct_mutex);
@@ -6457,10 +6522,11 @@
return 0;
+cleanup_pending:
+ atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
cleanup_objs:
drm_gem_object_unreference(&work->old_fb_obj->base);
drm_gem_object_unreference(&obj->base);
-cleanup_work:
mutex_unlock(&dev->struct_mutex);
spin_lock_irqsave(&dev->event_lock, flags);
@@ -7675,6 +7741,7 @@
dev_priv->display.update_wm = NULL;
} else
dev_priv->display.update_wm = pineview_update_wm;
+ dev_priv->display.init_clock_gating = gen3_init_clock_gating;
} else if (IS_G4X(dev)) {
dev_priv->display.update_wm = g4x_update_wm;
dev_priv->display.init_clock_gating = g4x_init_clock_gating;
@@ -7704,6 +7771,31 @@
else
dev_priv->display.get_fifo_size = i830_get_fifo_size;
}
+
+ /* Default just returns -ENODEV to indicate unsupported */
+ dev_priv->display.queue_flip = intel_default_queue_flip;
+
+ switch (INTEL_INFO(dev)->gen) {
+ case 2:
+ dev_priv->display.queue_flip = intel_gen2_queue_flip;
+ break;
+
+ case 3:
+ dev_priv->display.queue_flip = intel_gen3_queue_flip;
+ break;
+
+ case 4:
+ case 5:
+ dev_priv->display.queue_flip = intel_gen4_queue_flip;
+ break;
+
+ case 6:
+ dev_priv->display.queue_flip = intel_gen6_queue_flip;
+ break;
+ case 7:
+ dev_priv->display.queue_flip = intel_gen7_queue_flip;
+ break;
+ }
}
/*
@@ -7719,6 +7811,15 @@
DRM_DEBUG_DRIVER("applying pipe a force quirk\n");
}
+/*
+ * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
+ */
+static void quirk_ssc_force_disable(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
+}
+
struct intel_quirk {
int device;
int subsystem_vendor;
@@ -7747,6 +7848,9 @@
/* 855 & before need to leave pipe A & dpll A up */
{ 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
{ 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+
+ /* Lenovo U160 cannot use SSC on LVDS */
+ { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
};
static void intel_init_quirks(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index a4d8031..e2aced6 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -50,7 +50,6 @@
bool has_audio;
int force_audio;
uint32_t color_range;
- int dpms_mode;
uint8_t link_bw;
uint8_t lane_count;
uint8_t dpcd[4];
@@ -59,8 +58,6 @@
bool is_pch_edp;
uint8_t train_set[4];
uint8_t link_status[DP_LINK_STATUS_SIZE];
-
- struct drm_property *force_audio_property;
};
/**
@@ -140,8 +137,8 @@
{
int max_lane_count = 4;
- if (intel_dp->dpcd[0] >= 0x11) {
- max_lane_count = intel_dp->dpcd[2] & 0x1f;
+ if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) {
+ max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f;
switch (max_lane_count) {
case 1: case 2: case 4:
break;
@@ -155,7 +152,7 @@
static int
intel_dp_max_link_bw(struct intel_dp *intel_dp)
{
- int max_link_bw = intel_dp->dpcd[1];
+ int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE];
switch (max_link_bw) {
case DP_LINK_BW_1_62:
@@ -776,7 +773,8 @@
/*
* Check for DPCD version > 1.1 and enhanced framing support
*/
- if (intel_dp->dpcd[0] >= 0x11 && (intel_dp->dpcd[2] & DP_ENHANCED_FRAME_CAP)) {
+ if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
+ (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
intel_dp->DP |= DP_ENHANCED_FRAMING;
}
@@ -944,11 +942,44 @@
udelay(200);
}
+/* If the sink supports it, try to set the power state appropriately */
+static void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
+{
+ int ret, i;
+
+ /* Should have a valid DPCD by this point */
+ if (intel_dp->dpcd[DP_DPCD_REV] < 0x11)
+ return;
+
+ if (mode != DRM_MODE_DPMS_ON) {
+ ret = intel_dp_aux_native_write_1(intel_dp, DP_SET_POWER,
+ DP_SET_POWER_D3);
+ if (ret != 1)
+ DRM_DEBUG_DRIVER("failed to write sink power state\n");
+ } else {
+ /*
+ * When turning on, we need to retry for 1ms to give the sink
+ * time to wake up.
+ */
+ for (i = 0; i < 3; i++) {
+ ret = intel_dp_aux_native_write_1(intel_dp,
+ DP_SET_POWER,
+ DP_SET_POWER_D0);
+ if (ret == 1)
+ break;
+ msleep(1);
+ }
+ }
+}
+
static void intel_dp_prepare(struct drm_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
struct drm_device *dev = encoder->dev;
+ /* Wake up the sink first */
+ intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+
if (is_edp(intel_dp)) {
ironlake_edp_backlight_off(dev);
ironlake_edp_panel_off(dev);
@@ -992,6 +1023,7 @@
if (mode != DRM_MODE_DPMS_ON) {
if (is_edp(intel_dp))
ironlake_edp_backlight_off(dev);
+ intel_dp_sink_dpms(intel_dp, mode);
intel_dp_link_down(intel_dp);
if (is_edp(intel_dp))
ironlake_edp_panel_off(dev);
@@ -1000,6 +1032,7 @@
} else {
if (is_edp(intel_dp))
ironlake_edp_panel_vdd_on(intel_dp);
+ intel_dp_sink_dpms(intel_dp, mode);
if (!(dp_reg & DP_PORT_EN)) {
intel_dp_start_link_train(intel_dp);
if (is_edp(intel_dp)) {
@@ -1011,7 +1044,31 @@
if (is_edp(intel_dp))
ironlake_edp_backlight_on(dev);
}
- intel_dp->dpms_mode = mode;
+}
+
+/*
+ * Native read with retry for link status and receiver capability reads for
+ * cases where the sink may still be asleep.
+ */
+static bool
+intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address,
+ uint8_t *recv, int recv_bytes)
+{
+ int ret, i;
+
+ /*
+ * Sinks are *supposed* to come up within 1ms from an off state,
+ * but we're also supposed to retry 3 times per the spec.
+ */
+ for (i = 0; i < 3; i++) {
+ ret = intel_dp_aux_native_read(intel_dp, address, recv,
+ recv_bytes);
+ if (ret == recv_bytes)
+ return true;
+ msleep(1);
+ }
+
+ return false;
}
/*
@@ -1021,14 +1078,10 @@
static bool
intel_dp_get_link_status(struct intel_dp *intel_dp)
{
- int ret;
-
- ret = intel_dp_aux_native_read(intel_dp,
- DP_LANE0_1_STATUS,
- intel_dp->link_status, DP_LINK_STATUS_SIZE);
- if (ret != DP_LINK_STATUS_SIZE)
- return false;
- return true;
+ return intel_dp_aux_native_read_retry(intel_dp,
+ DP_LANE0_1_STATUS,
+ intel_dp->link_status,
+ DP_LINK_STATUS_SIZE);
}
static uint8_t
@@ -1517,6 +1570,8 @@
static void
intel_dp_check_link_status(struct intel_dp *intel_dp)
{
+ int ret;
+
if (!intel_dp->base.base.crtc)
return;
@@ -1525,6 +1580,15 @@
return;
}
+ /* Try to read receiver status if the link appears to be up */
+ ret = intel_dp_aux_native_read(intel_dp,
+ 0x000, intel_dp->dpcd,
+ sizeof (intel_dp->dpcd));
+ if (ret != sizeof(intel_dp->dpcd)) {
+ intel_dp_link_down(intel_dp);
+ return;
+ }
+
if (!intel_channel_eq_ok(intel_dp)) {
intel_dp_start_link_train(intel_dp);
intel_dp_complete_link_train(intel_dp);
@@ -1535,6 +1599,7 @@
ironlake_dp_detect(struct intel_dp *intel_dp)
{
enum drm_connector_status status;
+ bool ret;
/* Can't disconnect eDP, but you can close the lid... */
if (is_edp(intel_dp)) {
@@ -1545,13 +1610,11 @@
}
status = connector_status_disconnected;
- if (intel_dp_aux_native_read(intel_dp,
- 0x000, intel_dp->dpcd,
- sizeof (intel_dp->dpcd))
- == sizeof(intel_dp->dpcd)) {
- if (intel_dp->dpcd[0] != 0)
- status = connector_status_connected;
- }
+ ret = intel_dp_aux_native_read_retry(intel_dp,
+ 0x000, intel_dp->dpcd,
+ sizeof (intel_dp->dpcd));
+ if (ret && intel_dp->dpcd[DP_DPCD_REV] != 0)
+ status = connector_status_connected;
DRM_DEBUG_KMS("DPCD: %hx%hx%hx%hx\n", intel_dp->dpcd[0],
intel_dp->dpcd[1], intel_dp->dpcd[2], intel_dp->dpcd[3]);
return status;
@@ -1588,7 +1651,7 @@
if (intel_dp_aux_native_read(intel_dp, 0x000, intel_dp->dpcd,
sizeof (intel_dp->dpcd)) == sizeof (intel_dp->dpcd))
{
- if (intel_dp->dpcd[0] != 0)
+ if (intel_dp->dpcd[DP_DPCD_REV] != 0)
status = connector_status_connected;
}
@@ -1702,7 +1765,7 @@
if (ret)
return ret;
- if (property == intel_dp->force_audio_property) {
+ if (property == dev_priv->force_audio_property) {
int i = val;
bool has_audio;
@@ -1792,8 +1855,7 @@
{
struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base);
- if (intel_dp->dpms_mode == DRM_MODE_DPMS_ON)
- intel_dp_check_link_status(intel_dp);
+ intel_dp_check_link_status(intel_dp);
}
/* Return which DP Port should be selected for Transcoder DP control */
@@ -1841,16 +1903,7 @@
static void
intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector)
{
- struct drm_device *dev = connector->dev;
-
- intel_dp->force_audio_property =
- drm_property_create(dev, DRM_MODE_PROP_RANGE, "force_audio", 2);
- if (intel_dp->force_audio_property) {
- intel_dp->force_audio_property->values[0] = -1;
- intel_dp->force_audio_property->values[1] = 1;
- drm_connector_attach_property(connector, intel_dp->force_audio_property, 0);
- }
-
+ intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
}
@@ -1870,7 +1923,6 @@
return;
intel_dp->output_reg = output_reg;
- intel_dp->dpms_mode = -1;
intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
if (!intel_connector) {
@@ -1965,8 +2017,9 @@
sizeof(intel_dp->dpcd));
ironlake_edp_panel_vdd_off(intel_dp);
if (ret == sizeof(intel_dp->dpcd)) {
- if (intel_dp->dpcd[0] >= 0x11)
- dev_priv->no_aux_handshake = intel_dp->dpcd[3] &
+ if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
+ dev_priv->no_aux_handshake =
+ intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
} else {
/* if this fails, presume the device is a ghost */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 831d7a4..9ffa61e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -236,6 +236,7 @@
int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);
extern bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus);
+extern void intel_attach_force_audio_property(struct drm_connector *connector);
extern void intel_attach_broadcast_rgb_property(struct drm_connector *connector);
extern void intel_crt_init(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index f289b86..aa0a8e8 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -45,7 +45,6 @@
bool has_hdmi_sink;
bool has_audio;
int force_audio;
- struct drm_property *force_audio_property;
};
static struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder)
@@ -194,7 +193,7 @@
if (mode->clock > 165000)
return MODE_CLOCK_HIGH;
if (mode->clock < 20000)
- return MODE_CLOCK_HIGH;
+ return MODE_CLOCK_LOW;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
@@ -287,7 +286,7 @@
if (ret)
return ret;
- if (property == intel_hdmi->force_audio_property) {
+ if (property == dev_priv->force_audio_property) {
int i = val;
bool has_audio;
@@ -365,16 +364,7 @@
static void
intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *connector)
{
- struct drm_device *dev = connector->dev;
-
- intel_hdmi->force_audio_property =
- drm_property_create(dev, DRM_MODE_PROP_RANGE, "force_audio", 2);
- if (intel_hdmi->force_audio_property) {
- intel_hdmi->force_audio_property->values[0] = -1;
- intel_hdmi->force_audio_property->values[1] = 1;
- drm_connector_attach_property(connector, intel_hdmi->force_audio_property, 0);
- }
-
+ intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
}
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index d3b903b..d98cee6 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -401,8 +401,7 @@
bus->reg0 = i | GMBUS_RATE_100KHZ;
/* XXX force bit banging until GMBUS is fully debugged */
- if (IS_GEN2(dev))
- bus->force_bit = intel_gpio_create(dev_priv, i);
+ bus->force_bit = intel_gpio_create(dev_priv, i);
}
intel_i2c_reset(dev_priv->dev);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 67cb076..b28f7bd 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -727,6 +727,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "U800"),
},
},
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Asus EeeBox PC EB1007",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"),
+ },
+ },
{ } /* terminating entry */
};
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index 9034dd8f..3b26a3b 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -81,6 +81,36 @@
return ret;
}
+static const char *force_audio_names[] = {
+ "off",
+ "auto",
+ "on",
+};
+
+void
+intel_attach_force_audio_property(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_property *prop;
+ int i;
+
+ prop = dev_priv->force_audio_property;
+ if (prop == NULL) {
+ prop = drm_property_create(dev, DRM_MODE_PROP_ENUM,
+ "audio",
+ ARRAY_SIZE(force_audio_names));
+ if (prop == NULL)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(force_audio_names); i++)
+ drm_property_add_enum(prop, i, i-1, force_audio_names[i]);
+
+ dev_priv->force_audio_property = prop;
+ }
+ drm_connector_attach_property(connector, prop, 0);
+}
+
static const char *broadcast_rgb_names[] = {
"Full",
"Limited 16:235",
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index a670c00..9e2959b 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -1409,6 +1409,11 @@
overlay = kzalloc(sizeof(struct intel_overlay), GFP_KERNEL);
if (!overlay)
return;
+
+ mutex_lock(&dev->struct_mutex);
+ if (WARN_ON(dev_priv->overlay))
+ goto out_free;
+
overlay->dev = dev;
reg_bo = i915_gem_alloc_object(dev, PAGE_SIZE);
@@ -1448,7 +1453,7 @@
regs = intel_overlay_map_regs(overlay);
if (!regs)
- goto out_free_bo;
+ goto out_unpin_bo;
memset(regs, 0, sizeof(struct overlay_registers));
update_polyphase_filter(regs);
@@ -1457,14 +1462,17 @@
intel_overlay_unmap_regs(overlay, regs);
dev_priv->overlay = overlay;
+ mutex_unlock(&dev->struct_mutex);
DRM_INFO("initialized overlay support\n");
return;
out_unpin_bo:
- i915_gem_object_unpin(reg_bo);
+ if (!OVERLAY_NEEDS_PHYSICAL(dev))
+ i915_gem_object_unpin(reg_bo);
out_free_bo:
drm_gem_object_unreference(®_bo->base);
out_free:
+ mutex_unlock(&dev->struct_mutex);
kfree(overlay);
return;
}
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index c0e0ee6..39ac2b6 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -165,7 +165,7 @@
int __must_check intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n);
static inline int intel_wait_ring_idle(struct intel_ring_buffer *ring)
{
- return intel_wait_ring_buffer(ring, ring->space - 8);
+ return intel_wait_ring_buffer(ring, ring->size - 8);
}
int __must_check intel_ring_begin(struct intel_ring_buffer *ring, int n);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 754086f..30fe554 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -148,8 +148,6 @@
int format_supported_num;
struct drm_property *tv_format;
- struct drm_property *force_audio_property;
-
/* add the property for the SDVO-TV */
struct drm_property *left;
struct drm_property *right;
@@ -1712,7 +1710,7 @@
if (ret)
return ret;
- if (property == intel_sdvo_connector->force_audio_property) {
+ if (property == dev_priv->force_audio_property) {
int i = val;
bool has_audio;
@@ -2037,15 +2035,7 @@
{
struct drm_device *dev = connector->base.base.dev;
- connector->force_audio_property =
- drm_property_create(dev, DRM_MODE_PROP_RANGE, "force_audio", 2);
- if (connector->force_audio_property) {
- connector->force_audio_property->values[0] = -1;
- connector->force_audio_property->values[1] = 1;
- drm_connector_attach_property(&connector->base.base,
- connector->force_audio_property, 0);
- }
-
+ intel_attach_force_audio_property(&connector->base.base);
if (INTEL_INFO(dev)->gen >= 4 && IS_MOBILE(dev))
intel_attach_broadcast_rgb_property(&connector->base.base);
}
diff --git a/drivers/gpu/drm/mga/mga_drv.h b/drivers/gpu/drm/mga/mga_drv.h
index 1084fa4..54558a0 100644
--- a/drivers/gpu/drm/mga/mga_drv.h
+++ b/drivers/gpu/drm/mga/mga_drv.h
@@ -195,29 +195,10 @@
#define mga_flush_write_combine() DRM_WRITEMEMORYBARRIER()
-#if defined(__linux__) && defined(__alpha__)
-#define MGA_BASE(reg) ((unsigned long)(dev_priv->mmio->handle))
-#define MGA_ADDR(reg) (MGA_BASE(reg) + reg)
-
-#define MGA_DEREF(reg) (*(volatile u32 *)MGA_ADDR(reg))
-#define MGA_DEREF8(reg) (*(volatile u8 *)MGA_ADDR(reg))
-
-#define MGA_READ(reg) (_MGA_READ((u32 *)MGA_ADDR(reg)))
-#define MGA_READ8(reg) (_MGA_READ((u8 *)MGA_ADDR(reg)))
-#define MGA_WRITE(reg, val) do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF(reg) = val; } while (0)
-#define MGA_WRITE8(reg, val) do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF8(reg) = val; } while (0)
-
-static inline u32 _MGA_READ(u32 *addr)
-{
- DRM_MEMORYBARRIER();
- return *(volatile u32 *)addr;
-}
-#else
#define MGA_READ8(reg) DRM_READ8(dev_priv->mmio, (reg))
#define MGA_READ(reg) DRM_READ32(dev_priv->mmio, (reg))
#define MGA_WRITE8(reg, val) DRM_WRITE8(dev_priv->mmio, (reg), (val))
#define MGA_WRITE(reg, val) DRM_WRITE32(dev_priv->mmio, (reg), (val))
-#endif
#define DWGREG0 0x1c00
#define DWGREG0_END 0x1dff
diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c
index f0d459b..525744d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_acpi.c
+++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c
@@ -262,7 +262,6 @@
vga_count++;
retval = nouveau_dsm_pci_probe(pdev);
- printk("ret val is %d\n", retval);
if (retval & NOUVEAU_DSM_HAS_MUX)
has_dsm |= 1;
if (retval & NOUVEAU_DSM_HAS_OPT)
diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c
index 4b9f449..7347075 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fence.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fence.c
@@ -339,11 +339,12 @@
int ret;
if (dev_priv->chipset < 0x84) {
- ret = RING_SPACE(chan, 3);
+ ret = RING_SPACE(chan, 4);
if (ret)
return ret;
- BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_OFFSET, 2);
+ BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 3);
+ OUT_RING (chan, NvSema);
OUT_RING (chan, sema->mem->start);
OUT_RING (chan, 1);
} else
@@ -351,10 +352,12 @@
struct nouveau_vma *vma = &dev_priv->fence.bo->vma;
u64 offset = vma->offset + sema->mem->start;
- ret = RING_SPACE(chan, 5);
+ ret = RING_SPACE(chan, 7);
if (ret)
return ret;
+ BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1);
+ OUT_RING (chan, chan->vram_handle);
BEGIN_RING(chan, NvSubSw, 0x0010, 4);
OUT_RING (chan, upper_32_bits(offset));
OUT_RING (chan, lower_32_bits(offset));
@@ -394,11 +397,12 @@
int ret;
if (dev_priv->chipset < 0x84) {
- ret = RING_SPACE(chan, 4);
+ ret = RING_SPACE(chan, 5);
if (ret)
return ret;
- BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_OFFSET, 1);
+ BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 2);
+ OUT_RING (chan, NvSema);
OUT_RING (chan, sema->mem->start);
BEGIN_RING(chan, NvSubSw, NV_SW_SEMAPHORE_RELEASE, 1);
OUT_RING (chan, 1);
@@ -407,10 +411,12 @@
struct nouveau_vma *vma = &dev_priv->fence.bo->vma;
u64 offset = vma->offset + sema->mem->start;
- ret = RING_SPACE(chan, 5);
+ ret = RING_SPACE(chan, 7);
if (ret)
return ret;
+ BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1);
+ OUT_RING (chan, chan->vram_handle);
BEGIN_RING(chan, NvSubSw, 0x0010, 4);
OUT_RING (chan, upper_32_bits(offset));
OUT_RING (chan, lower_32_bits(offset));
@@ -504,22 +510,22 @@
struct nouveau_gpuobj *obj = NULL;
int ret;
- if (dev_priv->card_type >= NV_C0)
- goto out_initialised;
+ if (dev_priv->card_type < NV_C0) {
+ /* Create an NV_SW object for various sync purposes */
+ ret = nouveau_gpuobj_gr_new(chan, NvSw, NV_SW);
+ if (ret)
+ return ret;
- /* Create an NV_SW object for various sync purposes */
- ret = nouveau_gpuobj_gr_new(chan, NvSw, NV_SW);
- if (ret)
- return ret;
+ ret = RING_SPACE(chan, 2);
+ if (ret)
+ return ret;
- /* we leave subchannel empty for nvc0 */
- ret = RING_SPACE(chan, 2);
- if (ret)
- return ret;
- BEGIN_RING(chan, NvSubSw, 0, 1);
- OUT_RING(chan, NvSw);
+ BEGIN_RING(chan, NvSubSw, 0, 1);
+ OUT_RING (chan, NvSw);
+ FIRE_RING (chan);
+ }
- /* Create a DMA object for the shared cross-channel sync area. */
+ /* Setup area of memory shared between all channels for x-chan sync */
if (USE_SEMA(dev) && dev_priv->chipset < 0x84) {
struct ttm_mem_reg *mem = &dev_priv->fence.bo->bo.mem;
@@ -534,23 +540,8 @@
nouveau_gpuobj_ref(NULL, &obj);
if (ret)
return ret;
-
- ret = RING_SPACE(chan, 2);
- if (ret)
- return ret;
- BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1);
- OUT_RING(chan, NvSema);
- } else {
- ret = RING_SPACE(chan, 2);
- if (ret)
- return ret;
- BEGIN_RING(chan, NvSubSw, NV_SW_DMA_SEMAPHORE, 1);
- OUT_RING (chan, chan->vram_handle); /* whole VM */
}
- FIRE_RING(chan);
-
-out_initialised:
INIT_LIST_HEAD(&chan->fence.pending);
spin_lock_init(&chan->fence.lock);
atomic_set(&chan->fence.last_sequence_irq, 0);
diff --git a/drivers/gpu/drm/nouveau/nouveau_hw.c b/drivers/gpu/drm/nouveau/nouveau_hw.c
index 053edf9..ba896e5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_hw.c
+++ b/drivers/gpu/drm/nouveau/nouveau_hw.c
@@ -900,6 +900,7 @@
}
/* NV11 and NV20 don't have this, they stop at 0x52. */
if (nv_gf4_disp_arch(dev)) {
+ rd_cio_state(dev, head, regp, NV_CIO_CRE_42);
rd_cio_state(dev, head, regp, NV_CIO_CRE_53);
rd_cio_state(dev, head, regp, NV_CIO_CRE_54);
@@ -1003,6 +1004,7 @@
nouveau_wait_eq(dev, 650000000, NV_PRMCIO_INP0__COLOR, 0x8, 0x0);
}
+ wr_cio_state(dev, head, regp, NV_CIO_CRE_42);
wr_cio_state(dev, head, regp, NV_CIO_CRE_53);
wr_cio_state(dev, head, regp, NV_CIO_CRE_54);
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index 2960f58..5ee14d2 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -397,7 +397,7 @@
if (pci_dma_supported(dev->pdev, DMA_BIT_MASK(40)))
dma_bits = 40;
} else
- if (drm_pci_device_is_pcie(dev) &&
+ if (0 && drm_pci_device_is_pcie(dev) &&
dev_priv->chipset > 0x40 &&
dev_priv->chipset != 0x45) {
if (pci_dma_supported(dev->pdev, DMA_BIT_MASK(39)))
@@ -868,7 +868,9 @@
nouveau_vm_unmap(&node->tmp_vma);
nouveau_vm_put(&node->tmp_vma);
}
+
mem->mm_node = NULL;
+ kfree(node);
}
static int
diff --git a/drivers/gpu/drm/nouveau/nouveau_perf.c b/drivers/gpu/drm/nouveau/nouveau_perf.c
index 922fb6b..ef9dec0 100644
--- a/drivers/gpu/drm/nouveau/nouveau_perf.c
+++ b/drivers/gpu/drm/nouveau/nouveau_perf.c
@@ -182,6 +182,11 @@
entries = perf[2];
}
+ if (entries > NOUVEAU_PM_MAX_LEVEL) {
+ NV_DEBUG(dev, "perf table has too many entries - buggy vbios?\n");
+ entries = NOUVEAU_PM_MAX_LEVEL;
+ }
+
entry = perf + headerlen;
for (i = 0; i < entries; i++) {
struct nouveau_pm_level *perflvl = &pm->perflvl[pm->nr_perflvl];
diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
index c77111e..82fad91 100644
--- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
@@ -458,7 +458,7 @@
dev_priv->gart_info.type = NOUVEAU_GART_HW;
dev_priv->gart_info.func = &nv50_sgdma_backend;
} else
- if (drm_pci_device_is_pcie(dev) &&
+ if (0 && drm_pci_device_is_pcie(dev) &&
dev_priv->chipset > 0x40 && dev_priv->chipset != 0x45) {
if (nv44_graph_class(dev)) {
dev_priv->gart_info.func = &nv44_sgdma_backend;
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index 38ea662..731acea 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -563,68 +563,68 @@
if (ret)
goto out_timer;
- switch (dev_priv->card_type) {
- case NV_04:
- nv04_graph_create(dev);
- break;
- case NV_10:
- nv10_graph_create(dev);
- break;
- case NV_20:
- case NV_30:
- nv20_graph_create(dev);
- break;
- case NV_40:
- nv40_graph_create(dev);
- break;
- case NV_50:
- nv50_graph_create(dev);
- break;
- case NV_C0:
- nvc0_graph_create(dev);
- break;
- default:
- break;
- }
-
- switch (dev_priv->chipset) {
- case 0x84:
- case 0x86:
- case 0x92:
- case 0x94:
- case 0x96:
- case 0xa0:
- nv84_crypt_create(dev);
- break;
- }
-
- switch (dev_priv->card_type) {
- case NV_50:
- switch (dev_priv->chipset) {
- case 0xa3:
- case 0xa5:
- case 0xa8:
- case 0xaf:
- nva3_copy_create(dev);
+ if (!nouveau_noaccel) {
+ switch (dev_priv->card_type) {
+ case NV_04:
+ nv04_graph_create(dev);
+ break;
+ case NV_10:
+ nv10_graph_create(dev);
+ break;
+ case NV_20:
+ case NV_30:
+ nv20_graph_create(dev);
+ break;
+ case NV_40:
+ nv40_graph_create(dev);
+ break;
+ case NV_50:
+ nv50_graph_create(dev);
+ break;
+ case NV_C0:
+ nvc0_graph_create(dev);
+ break;
+ default:
break;
}
- break;
- case NV_C0:
- nvc0_copy_create(dev, 0);
- nvc0_copy_create(dev, 1);
- break;
- default:
- break;
- }
- if (dev_priv->card_type == NV_40)
- nv40_mpeg_create(dev);
- else
- if (dev_priv->card_type == NV_50 &&
- (dev_priv->chipset < 0x98 || dev_priv->chipset == 0xa0))
- nv50_mpeg_create(dev);
+ switch (dev_priv->chipset) {
+ case 0x84:
+ case 0x86:
+ case 0x92:
+ case 0x94:
+ case 0x96:
+ case 0xa0:
+ nv84_crypt_create(dev);
+ break;
+ }
- if (!nouveau_noaccel) {
+ switch (dev_priv->card_type) {
+ case NV_50:
+ switch (dev_priv->chipset) {
+ case 0xa3:
+ case 0xa5:
+ case 0xa8:
+ case 0xaf:
+ nva3_copy_create(dev);
+ break;
+ }
+ break;
+ case NV_C0:
+ nvc0_copy_create(dev, 0);
+ nvc0_copy_create(dev, 1);
+ break;
+ default:
+ break;
+ }
+
+ if (dev_priv->card_type == NV_40)
+ nv40_mpeg_create(dev);
+ else
+ if (dev_priv->card_type == NV_50 &&
+ (dev_priv->chipset < 0x98 || dev_priv->chipset == 0xa0))
+ nv50_mpeg_create(dev);
+
for (e = 0; e < NVOBJ_ENGINE_NR; e++) {
if (dev_priv->eng[e]) {
ret = dev_priv->eng[e]->init(dev, e);
@@ -880,8 +880,8 @@
#ifdef __BIG_ENDIAN
/* Put the card in BE mode if it's not */
- if (nv_rd32(dev, NV03_PMC_BOOT_1))
- nv_wr32(dev, NV03_PMC_BOOT_1, 0x00000001);
+ if (nv_rd32(dev, NV03_PMC_BOOT_1) != 0x01000001)
+ nv_wr32(dev, NV03_PMC_BOOT_1, 0x01000001);
DRM_MEMORYBARRIER();
#endif
diff --git a/drivers/gpu/drm/nouveau/nouveau_vm.c b/drivers/gpu/drm/nouveau/nouveau_vm.c
index 0059e6f..519a6b4 100644
--- a/drivers/gpu/drm/nouveau/nouveau_vm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_vm.c
@@ -58,6 +58,7 @@
num -= len;
pte += len;
if (unlikely(end >= max)) {
+ phys += len << (bits + 12);
pde++;
pte = 0;
}
diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c
index 3c78bc8..f1a3ae4 100644
--- a/drivers/gpu/drm/nouveau/nv04_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv04_crtc.c
@@ -376,7 +376,10 @@
*/
/* framebuffer can be larger than crtc scanout area. */
- regp->CRTC[NV_CIO_CRE_RPC0_INDEX] = XLATE(fb->pitch / 8, 8, NV_CIO_CRE_RPC0_OFFSET_10_8);
+ regp->CRTC[NV_CIO_CRE_RPC0_INDEX] =
+ XLATE(fb->pitch / 8, 8, NV_CIO_CRE_RPC0_OFFSET_10_8);
+ regp->CRTC[NV_CIO_CRE_42] =
+ XLATE(fb->pitch / 8, 11, NV_CIO_CRE_42_OFFSET_11);
regp->CRTC[NV_CIO_CRE_RPC1_INDEX] = mode->crtc_hdisplay < 1280 ?
MASK(NV_CIO_CRE_RPC1_LARGE) : 0x00;
regp->CRTC[NV_CIO_CRE_LSR_INDEX] = XLATE(horizBlankEnd, 6, NV_CIO_CRE_LSR_HBE_6) |
@@ -824,8 +827,11 @@
regp->CRTC[NV_CIO_CR_OFFSET_INDEX] = drm_fb->pitch >> 3;
regp->CRTC[NV_CIO_CRE_RPC0_INDEX] =
XLATE(drm_fb->pitch >> 3, 8, NV_CIO_CRE_RPC0_OFFSET_10_8);
+ regp->CRTC[NV_CIO_CRE_42] =
+ XLATE(drm_fb->pitch / 8, 11, NV_CIO_CRE_42_OFFSET_11);
crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_RPC0_INDEX);
crtc_wr_cio_state(crtc, regp, NV_CIO_CR_OFFSET_INDEX);
+ crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_42);
/* Update the framebuffer location. */
regp->fb_start = nv_crtc->fb.offset & ~3;
diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
index 74a3f68..08da478 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -409,7 +409,7 @@
struct nouveau_channel *evo = dispc->sync;
int ret;
- ret = RING_SPACE(evo, 24);
+ ret = RING_SPACE(evo, chan ? 25 : 27);
if (unlikely(ret))
return ret;
@@ -458,8 +458,19 @@
/* queue the flip on the crtc's "display sync" channel */
BEGIN_RING(evo, 0, 0x0100, 1);
OUT_RING (evo, 0xfffe0000);
- BEGIN_RING(evo, 0, 0x0084, 5);
- OUT_RING (evo, chan ? 0x00000100 : 0x00000010);
+ if (chan) {
+ BEGIN_RING(evo, 0, 0x0084, 1);
+ OUT_RING (evo, 0x00000100);
+ } else {
+ BEGIN_RING(evo, 0, 0x0084, 1);
+ OUT_RING (evo, 0x00000010);
+ /* allows gamma somehow, PDISP will bitch at you if
+ * you don't wait for vblank before changing this..
+ */
+ BEGIN_RING(evo, 0, 0x00e0, 1);
+ OUT_RING (evo, 0x40000000);
+ }
+ BEGIN_RING(evo, 0, 0x0088, 4);
OUT_RING (evo, dispc->sem.offset);
OUT_RING (evo, 0xf00d0000 | dispc->sem.value);
OUT_RING (evo, 0x74b1e000);
diff --git a/drivers/gpu/drm/nouveau/nvreg.h b/drivers/gpu/drm/nouveau/nvreg.h
index fe0f253..bbfb1a6 100644
--- a/drivers/gpu/drm/nouveau/nvreg.h
+++ b/drivers/gpu/drm/nouveau/nvreg.h
@@ -277,6 +277,8 @@
# define NV_CIO_CRE_EBR_VDE_11 2:2
# define NV_CIO_CRE_EBR_VRS_11 4:4
# define NV_CIO_CRE_EBR_VBS_11 6:6
+# define NV_CIO_CRE_42 0x42
+# define NV_CIO_CRE_42_OFFSET_11 6:6
# define NV_CIO_CRE_43 0x43
# define NV_CIO_CRE_44 0x44 /* head control */
# define NV_CIO_CRE_CSB 0x45 /* colour saturation boost */
diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig
index 9746fee..ea92bbe 100644
--- a/drivers/gpu/drm/radeon/Kconfig
+++ b/drivers/gpu/drm/radeon/Kconfig
@@ -28,11 +28,4 @@
The kernel will also perform security check on command stream
provided by the user, we want to catch and forbid any illegal use
of the GPU such as DMA into random system memory or into memory
- not owned by the process supplying the command stream. This part
- of the code is still incomplete and this why we propose that patch
- as a staging driver addition, future security might forbid current
- experimental userspace to run.
-
- This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX
- (radeon up to X1950). Works is underway to provide support for R6XX,
- R7XX and newer hardware (radeon from HD2XXX to HD4XXX).
+ not owned by the process supplying the command stream.
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 49611e2..1b50ad8 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -1200,6 +1200,7 @@
#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF 0x10
#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING 0x11
#define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION 0x12
+#define EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP 0x14
// ucConfig
#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index ec84878..9541995 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -671,6 +671,13 @@
DISPPLL_CONFIG_DUAL_LINK;
}
}
+ if (radeon_encoder_is_dp_bridge(encoder)) {
+ struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
+ struct radeon_encoder *ext_radeon_encoder = to_radeon_encoder(ext_encoder);
+ args.v3.sInput.ucExtTransmitterID = ext_radeon_encoder->encoder_id;
+ } else
+ args.v3.sInput.ucExtTransmitterID = 0;
+
atom_execute_table(rdev->mode_info.atom_context,
index, (uint32_t *)&args);
adjusted_clock = le32_to_cpu(args.v3.sOutput.ulDispPllFreq) * 10;
@@ -1045,7 +1052,7 @@
uint64_t fb_location;
uint32_t fb_format, fb_pitch_pixels, tiling_flags;
u32 fb_swap = EVERGREEN_GRPH_ENDIAN_SWAP(EVERGREEN_GRPH_ENDIAN_NONE);
- u32 tmp;
+ u32 tmp, viewport_w, viewport_h;
int r;
/* no fb bound */
@@ -1171,8 +1178,10 @@
y &= ~1;
WREG32(EVERGREEN_VIEWPORT_START + radeon_crtc->crtc_offset,
(x << 16) | y);
+ viewport_w = crtc->mode.hdisplay;
+ viewport_h = (crtc->mode.vdisplay + 1) & ~1;
WREG32(EVERGREEN_VIEWPORT_SIZE + radeon_crtc->crtc_offset,
- (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay);
+ (viewport_w << 16) | viewport_h);
/* pageflip setup */
/* make sure flip is at vb rather than hb */
@@ -1213,7 +1222,7 @@
uint64_t fb_location;
uint32_t fb_format, fb_pitch_pixels, tiling_flags;
u32 fb_swap = R600_D1GRPH_SWAP_ENDIAN_NONE;
- u32 tmp;
+ u32 tmp, viewport_w, viewport_h;
int r;
/* no fb bound */
@@ -1338,8 +1347,10 @@
y &= ~1;
WREG32(AVIVO_D1MODE_VIEWPORT_START + radeon_crtc->crtc_offset,
(x << 16) | y);
+ viewport_w = crtc->mode.hdisplay;
+ viewport_h = (crtc->mode.vdisplay + 1) & ~1;
WREG32(AVIVO_D1MODE_VIEWPORT_SIZE + radeon_crtc->crtc_offset,
- (crtc->mode.hdisplay << 16) | crtc->mode.vdisplay);
+ (viewport_w << 16) | viewport_h);
/* pageflip setup */
/* make sure flip is at vb rather than hb */
diff --git a/drivers/gpu/drm/radeon/cayman_blit_shaders.c b/drivers/gpu/drm/radeon/cayman_blit_shaders.c
index e148ab0..7b4eeb7 100644
--- a/drivers/gpu/drm/radeon/cayman_blit_shaders.c
+++ b/drivers/gpu/drm/radeon/cayman_blit_shaders.c
@@ -39,17 +39,335 @@
const u32 cayman_default_state[] =
{
- /* XXX fill in additional blit state */
+ 0xc0066900,
+ 0x00000000,
+ 0x00000060, /* DB_RENDER_CONTROL */
+ 0x00000000, /* DB_COUNT_CONTROL */
+ 0x00000000, /* DB_DEPTH_VIEW */
+ 0x0000002a, /* DB_RENDER_OVERRIDE */
+ 0x00000000, /* DB_RENDER_OVERRIDE2 */
+ 0x00000000, /* DB_HTILE_DATA_BASE */
0xc0026900,
- 0x00000316,
- 0x0000000e, /* VGT_VERTEX_REUSE_BLOCK_CNTL */
- 0x00000010, /* */
+ 0x0000000a,
+ 0x00000000, /* DB_STENCIL_CLEAR */
+ 0x00000000, /* DB_DEPTH_CLEAR */
+
+ 0xc0036900,
+ 0x0000000f,
+ 0x00000000, /* DB_DEPTH_INFO */
+ 0x00000000, /* DB_Z_INFO */
+ 0x00000000, /* DB_STENCIL_INFO */
+
+ 0xc0016900,
+ 0x00000080,
+ 0x00000000, /* PA_SC_WINDOW_OFFSET */
+
+ 0xc00d6900,
+ 0x00000083,
+ 0x0000ffff, /* PA_SC_CLIPRECT_RULE */
+ 0x00000000, /* PA_SC_CLIPRECT_0_TL */
+ 0x20002000, /* PA_SC_CLIPRECT_0_BR */
+ 0x00000000,
+ 0x20002000,
+ 0x00000000,
+ 0x20002000,
+ 0x00000000,
+ 0x20002000,
+ 0xaaaaaaaa, /* PA_SC_EDGERULE */
+ 0x00000000, /* PA_SU_HARDWARE_SCREEN_OFFSET */
+ 0x0000000f, /* CB_TARGET_MASK */
+ 0x0000000f, /* CB_SHADER_MASK */
+
+ 0xc0226900,
+ 0x00000094,
+ 0x80000000, /* PA_SC_VPORT_SCISSOR_0_TL */
+ 0x20002000, /* PA_SC_VPORT_SCISSOR_0_BR */
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x80000000,
+ 0x20002000,
+ 0x00000000, /* PA_SC_VPORT_ZMIN_0 */
+ 0x3f800000, /* PA_SC_VPORT_ZMAX_0 */
+
+ 0xc0016900,
+ 0x000000d4,
+ 0x00000000, /* SX_MISC */
0xc0026900,
0x000000d9,
0x00000000, /* CP_RINGID */
0x00000000, /* CP_VMID */
+
+ 0xc0096900,
+ 0x00000100,
+ 0x00ffffff, /* VGT_MAX_VTX_INDX */
+ 0x00000000, /* VGT_MIN_VTX_INDX */
+ 0x00000000, /* VGT_INDX_OFFSET */
+ 0x00000000, /* VGT_MULTI_PRIM_IB_RESET_INDX */
+ 0x00000000, /* SX_ALPHA_TEST_CONTROL */
+ 0x00000000, /* CB_BLEND_RED */
+ 0x00000000, /* CB_BLEND_GREEN */
+ 0x00000000, /* CB_BLEND_BLUE */
+ 0x00000000, /* CB_BLEND_ALPHA */
+
+ 0xc0016900,
+ 0x00000187,
+ 0x00000100, /* SPI_VS_OUT_ID_0 */
+
+ 0xc0026900,
+ 0x00000191,
+ 0x00000100, /* SPI_PS_INPUT_CNTL_0 */
+ 0x00000101, /* SPI_PS_INPUT_CNTL_1 */
+
+ 0xc0016900,
+ 0x000001b1,
+ 0x00000000, /* SPI_VS_OUT_CONFIG */
+
+ 0xc0106900,
+ 0x000001b3,
+ 0x20000001, /* SPI_PS_IN_CONTROL_0 */
+ 0x00000000, /* SPI_PS_IN_CONTROL_1 */
+ 0x00000000, /* SPI_INTERP_CONTROL_0 */
+ 0x00000000, /* SPI_INPUT_Z */
+ 0x00000000, /* SPI_FOG_CNTL */
+ 0x00100000, /* SPI_BARYC_CNTL */
+ 0x00000000, /* SPI_PS_IN_CONTROL_2 */
+ 0x00000000, /* SPI_COMPUTE_INPUT_CNTL */
+ 0x00000000, /* SPI_COMPUTE_NUM_THREAD_X */
+ 0x00000000, /* SPI_COMPUTE_NUM_THREAD_Y */
+ 0x00000000, /* SPI_COMPUTE_NUM_THREAD_Z */
+ 0x00000000, /* SPI_GPR_MGMT */
+ 0x00000000, /* SPI_LDS_MGMT */
+ 0x00000000, /* SPI_STACK_MGMT */
+ 0x00000000, /* SPI_WAVE_MGMT_1 */
+ 0x00000000, /* SPI_WAVE_MGMT_2 */
+
+ 0xc0016900,
+ 0x000001e0,
+ 0x00000000, /* CB_BLEND0_CONTROL */
+
+ 0xc00e6900,
+ 0x00000200,
+ 0x00000000, /* DB_DEPTH_CONTROL */
+ 0x00000000, /* DB_EQAA */
+ 0x00cc0010, /* CB_COLOR_CONTROL */
+ 0x00000210, /* DB_SHADER_CONTROL */
+ 0x00010000, /* PA_CL_CLIP_CNTL */
+ 0x00000004, /* PA_SU_SC_MODE_CNTL */
+ 0x00000100, /* PA_CL_VTE_CNTL */
+ 0x00000000, /* PA_CL_VS_OUT_CNTL */
+ 0x00000000, /* PA_CL_NANINF_CNTL */
+ 0x00000000, /* PA_SU_LINE_STIPPLE_CNTL */
+ 0x00000000, /* PA_SU_LINE_STIPPLE_SCALE */
+ 0x00000000, /* PA_SU_PRIM_FILTER_CNTL */
+ 0x00000000, /* */
+ 0x00000000, /* */
+
+ 0xc0026900,
+ 0x00000229,
+ 0x00000000, /* SQ_PGM_START_FS */
+ 0x00000000,
+
+ 0xc0016900,
+ 0x0000023b,
+ 0x00000000, /* SQ_LDS_ALLOC_PS */
+
+ 0xc0066900,
+ 0x00000240,
+ 0x00000000, /* SQ_ESGS_RING_ITEMSIZE */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+
+ 0xc0046900,
+ 0x00000247,
+ 0x00000000, /* SQ_GS_VERT_ITEMSIZE */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+
+ 0xc0116900,
+ 0x00000280,
+ 0x00000000, /* PA_SU_POINT_SIZE */
+ 0x00000000, /* PA_SU_POINT_MINMAX */
+ 0x00000008, /* PA_SU_LINE_CNTL */
+ 0x00000000, /* PA_SC_LINE_STIPPLE */
+ 0x00000000, /* VGT_OUTPUT_PATH_CNTL */
+ 0x00000000, /* VGT_HOS_CNTL */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000, /* VGT_GS_MODE */
+
+ 0xc0026900,
+ 0x00000292,
+ 0x00000000, /* PA_SC_MODE_CNTL_0 */
+ 0x00000000, /* PA_SC_MODE_CNTL_1 */
+
+ 0xc0016900,
+ 0x000002a1,
+ 0x00000000, /* VGT_PRIMITIVEID_EN */
+
+ 0xc0016900,
+ 0x000002a5,
+ 0x00000000, /* VGT_MULTI_PRIM_IB_RESET_EN */
+
+ 0xc0026900,
+ 0x000002a8,
+ 0x00000000, /* VGT_INSTANCE_STEP_RATE_0 */
+ 0x00000000,
+
+ 0xc0026900,
+ 0x000002ad,
+ 0x00000000, /* VGT_REUSE_OFF */
+ 0x00000000,
+
+ 0xc0016900,
+ 0x000002d5,
+ 0x00000000, /* VGT_SHADER_STAGES_EN */
+
+ 0xc0016900,
+ 0x000002dc,
+ 0x0000aa00, /* DB_ALPHA_TO_MASK */
+
+ 0xc0066900,
+ 0x000002de,
+ 0x00000000, /* PA_SU_POLY_OFFSET_DB_FMT_CNTL */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+
+ 0xc0026900,
+ 0x000002e5,
+ 0x00000000, /* VGT_STRMOUT_CONFIG */
+ 0x00000000,
+
+ 0xc01b6900,
+ 0x000002f5,
+ 0x76543210, /* PA_SC_CENTROID_PRIORITY_0 */
+ 0xfedcba98, /* PA_SC_CENTROID_PRIORITY_1 */
+ 0x00000000, /* PA_SC_LINE_CNTL */
+ 0x00000000, /* PA_SC_AA_CONFIG */
+ 0x00000005, /* PA_SU_VTX_CNTL */
+ 0x3f800000, /* PA_CL_GB_VERT_CLIP_ADJ */
+ 0x3f800000, /* PA_CL_GB_VERT_DISC_ADJ */
+ 0x3f800000, /* PA_CL_GB_HORZ_CLIP_ADJ */
+ 0x3f800000, /* PA_CL_GB_HORZ_DISC_ADJ */
+ 0x00000000, /* PA_SC_AA_SAMPLE_LOCS_PIXEL_X0Y0_0 */
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0x00000000,
+ 0xffffffff, /* PA_SC_AA_MASK_X0Y0_X1Y0 */
+ 0xffffffff,
+
+ 0xc0026900,
+ 0x00000316,
+ 0x0000000e, /* VGT_VERTEX_REUSE_BLOCK_CNTL */
+ 0x00000010, /* */
};
+const u32 cayman_vs[] =
+{
+ 0x00000004,
+ 0x80400400,
+ 0x0000a03c,
+ 0x95000688,
+ 0x00004000,
+ 0x15000688,
+ 0x00000000,
+ 0x88000000,
+ 0x04000000,
+ 0x67961001,
+#ifdef __BIG_ENDIAN
+ 0x00020000,
+#else
+ 0x00000000,
+#endif
+ 0x00000000,
+ 0x04000000,
+ 0x67961000,
+#ifdef __BIG_ENDIAN
+ 0x00020008,
+#else
+ 0x00000008,
+#endif
+ 0x00000000,
+};
+
+const u32 cayman_ps[] =
+{
+ 0x00000004,
+ 0xa00c0000,
+ 0x00000008,
+ 0x80400000,
+ 0x00000000,
+ 0x95000688,
+ 0x00000000,
+ 0x88000000,
+ 0x00380400,
+ 0x00146b10,
+ 0x00380000,
+ 0x20146b10,
+ 0x00380400,
+ 0x40146b00,
+ 0x80380000,
+ 0x60146b00,
+ 0x00000010,
+ 0x000d1000,
+ 0xb0800000,
+ 0x00000000,
+};
+
+const u32 cayman_ps_size = ARRAY_SIZE(cayman_ps);
+const u32 cayman_vs_size = ARRAY_SIZE(cayman_vs);
const u32 cayman_default_size = ARRAY_SIZE(cayman_default_state);
diff --git a/drivers/gpu/drm/radeon/cayman_blit_shaders.h b/drivers/gpu/drm/radeon/cayman_blit_shaders.h
index 33b75e5d..f5d0e9a 100644
--- a/drivers/gpu/drm/radeon/cayman_blit_shaders.h
+++ b/drivers/gpu/drm/radeon/cayman_blit_shaders.h
@@ -25,8 +25,11 @@
#ifndef CAYMAN_BLIT_SHADERS_H
#define CAYMAN_BLIT_SHADERS_H
+extern const u32 cayman_ps[];
+extern const u32 cayman_vs[];
extern const u32 cayman_default_state[];
+extern const u32 cayman_ps_size, cayman_vs_size;
extern const u32 cayman_default_size;
#endif
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 7c37638..15bd047 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -88,21 +88,40 @@
/* get temperature in millidegrees */
int evergreen_get_temp(struct radeon_device *rdev)
{
- u32 temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >>
- ASIC_T_SHIFT;
- u32 actual_temp = 0;
+ u32 temp, toffset;
+ int actual_temp = 0;
- if (temp & 0x400)
- actual_temp = -256;
- else if (temp & 0x200)
- actual_temp = 255;
- else if (temp & 0x100) {
- actual_temp = temp & 0x1ff;
- actual_temp |= ~0x1ff;
- } else
- actual_temp = temp & 0xff;
+ if (rdev->family == CHIP_JUNIPER) {
+ toffset = (RREG32(CG_THERMAL_CTRL) & TOFFSET_MASK) >>
+ TOFFSET_SHIFT;
+ temp = (RREG32(CG_TS0_STATUS) & TS0_ADC_DOUT_MASK) >>
+ TS0_ADC_DOUT_SHIFT;
- return (actual_temp * 1000) / 2;
+ if (toffset & 0x100)
+ actual_temp = temp / 2 - (0x200 - toffset);
+ else
+ actual_temp = temp / 2 + toffset;
+
+ actual_temp = actual_temp * 1000;
+
+ } else {
+ temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >>
+ ASIC_T_SHIFT;
+
+ if (temp & 0x400)
+ actual_temp = -256;
+ else if (temp & 0x200)
+ actual_temp = 255;
+ else if (temp & 0x100) {
+ actual_temp = temp & 0x1ff;
+ actual_temp |= ~0x1ff;
+ } else
+ actual_temp = temp & 0xff;
+
+ actual_temp = (actual_temp * 1000) / 2;
+ }
+
+ return actual_temp;
}
int sumo_get_temp(struct radeon_device *rdev)
@@ -121,11 +140,17 @@
struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
if (voltage->type == VOLTAGE_SW) {
+ /* 0xff01 is a flag rather then an actual voltage */
+ if (voltage->voltage == 0xff01)
+ return;
if (voltage->voltage && (voltage->voltage != rdev->pm.current_vddc)) {
radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC);
rdev->pm.current_vddc = voltage->voltage;
DRM_DEBUG("Setting: vddc: %d\n", voltage->voltage);
}
+ /* 0xff01 is a flag rather then an actual voltage */
+ if (voltage->vddci == 0xff01)
+ return;
if (voltage->vddci && (voltage->vddci != rdev->pm.current_vddci)) {
radeon_atom_set_voltage(rdev, voltage->vddci, SET_VOLTAGE_TYPE_ASIC_VDDCI);
rdev->pm.current_vddci = voltage->vddci;
@@ -960,17 +985,19 @@
{
save->vga_control[0] = RREG32(D1VGA_CONTROL);
save->vga_control[1] = RREG32(D2VGA_CONTROL);
- save->vga_control[2] = RREG32(EVERGREEN_D3VGA_CONTROL);
- save->vga_control[3] = RREG32(EVERGREEN_D4VGA_CONTROL);
- save->vga_control[4] = RREG32(EVERGREEN_D5VGA_CONTROL);
- save->vga_control[5] = RREG32(EVERGREEN_D6VGA_CONTROL);
save->vga_render_control = RREG32(VGA_RENDER_CONTROL);
save->vga_hdp_control = RREG32(VGA_HDP_CONTROL);
save->crtc_control[0] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET);
save->crtc_control[1] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET);
- if (!(rdev->flags & RADEON_IS_IGP)) {
+ if (rdev->num_crtc >= 4) {
+ save->vga_control[2] = RREG32(EVERGREEN_D3VGA_CONTROL);
+ save->vga_control[3] = RREG32(EVERGREEN_D4VGA_CONTROL);
save->crtc_control[2] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET);
save->crtc_control[3] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET);
+ }
+ if (rdev->num_crtc >= 6) {
+ save->vga_control[4] = RREG32(EVERGREEN_D5VGA_CONTROL);
+ save->vga_control[5] = RREG32(EVERGREEN_D6VGA_CONTROL);
save->crtc_control[4] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET);
save->crtc_control[5] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET);
}
@@ -979,35 +1006,45 @@
WREG32(VGA_RENDER_CONTROL, 0);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 1);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 1);
- if (!(rdev->flags & RADEON_IS_IGP)) {
+ if (rdev->num_crtc >= 4) {
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 1);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 1);
+ }
+ if (rdev->num_crtc >= 6) {
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 1);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 1);
}
WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
- if (!(rdev->flags & RADEON_IS_IGP)) {
+ if (rdev->num_crtc >= 4) {
WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
+ }
+ if (rdev->num_crtc >= 6) {
WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, 0);
WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
}
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
- if (!(rdev->flags & RADEON_IS_IGP)) {
+ if (rdev->num_crtc >= 4) {
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
+ }
+ if (rdev->num_crtc >= 6) {
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
}
WREG32(D1VGA_CONTROL, 0);
WREG32(D2VGA_CONTROL, 0);
- WREG32(EVERGREEN_D3VGA_CONTROL, 0);
- WREG32(EVERGREEN_D4VGA_CONTROL, 0);
- WREG32(EVERGREEN_D5VGA_CONTROL, 0);
- WREG32(EVERGREEN_D6VGA_CONTROL, 0);
+ if (rdev->num_crtc >= 4) {
+ WREG32(EVERGREEN_D3VGA_CONTROL, 0);
+ WREG32(EVERGREEN_D4VGA_CONTROL, 0);
+ }
+ if (rdev->num_crtc >= 6) {
+ WREG32(EVERGREEN_D5VGA_CONTROL, 0);
+ WREG32(EVERGREEN_D6VGA_CONTROL, 0);
+ }
}
void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *save)
@@ -1030,7 +1067,7 @@
WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + EVERGREEN_CRTC1_REGISTER_OFFSET,
(u32)rdev->mc.vram_start);
- if (!(rdev->flags & RADEON_IS_IGP)) {
+ if (rdev->num_crtc >= 4) {
WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC2_REGISTER_OFFSET,
upper_32_bits(rdev->mc.vram_start));
WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC2_REGISTER_OFFSET,
@@ -1048,7 +1085,8 @@
(u32)rdev->mc.vram_start);
WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + EVERGREEN_CRTC3_REGISTER_OFFSET,
(u32)rdev->mc.vram_start);
-
+ }
+ if (rdev->num_crtc >= 6) {
WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC4_REGISTER_OFFSET,
upper_32_bits(rdev->mc.vram_start));
WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC4_REGISTER_OFFSET,
@@ -1076,31 +1114,41 @@
/* Restore video state */
WREG32(D1VGA_CONTROL, save->vga_control[0]);
WREG32(D2VGA_CONTROL, save->vga_control[1]);
- WREG32(EVERGREEN_D3VGA_CONTROL, save->vga_control[2]);
- WREG32(EVERGREEN_D4VGA_CONTROL, save->vga_control[3]);
- WREG32(EVERGREEN_D5VGA_CONTROL, save->vga_control[4]);
- WREG32(EVERGREEN_D6VGA_CONTROL, save->vga_control[5]);
+ if (rdev->num_crtc >= 4) {
+ WREG32(EVERGREEN_D3VGA_CONTROL, save->vga_control[2]);
+ WREG32(EVERGREEN_D4VGA_CONTROL, save->vga_control[3]);
+ }
+ if (rdev->num_crtc >= 6) {
+ WREG32(EVERGREEN_D5VGA_CONTROL, save->vga_control[4]);
+ WREG32(EVERGREEN_D6VGA_CONTROL, save->vga_control[5]);
+ }
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 1);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 1);
- if (!(rdev->flags & RADEON_IS_IGP)) {
+ if (rdev->num_crtc >= 4) {
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 1);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 1);
+ }
+ if (rdev->num_crtc >= 6) {
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 1);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 1);
}
WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, save->crtc_control[0]);
WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, save->crtc_control[1]);
- if (!(rdev->flags & RADEON_IS_IGP)) {
+ if (rdev->num_crtc >= 4) {
WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, save->crtc_control[2]);
WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, save->crtc_control[3]);
+ }
+ if (rdev->num_crtc >= 6) {
WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, save->crtc_control[4]);
WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, save->crtc_control[5]);
}
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
- if (!(rdev->flags & RADEON_IS_IGP)) {
+ if (rdev->num_crtc >= 4) {
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
+ }
+ if (rdev->num_crtc >= 6) {
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0);
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
}
@@ -1415,6 +1463,8 @@
case CHIP_CEDAR:
case CHIP_REDWOOD:
case CHIP_PALM:
+ case CHIP_SUMO:
+ case CHIP_SUMO2:
case CHIP_TURKS:
case CHIP_CAICOS:
force_no_swizzle = false;
@@ -1544,6 +1594,8 @@
case CHIP_REDWOOD:
case CHIP_CEDAR:
case CHIP_PALM:
+ case CHIP_SUMO:
+ case CHIP_SUMO2:
case CHIP_TURKS:
case CHIP_CAICOS:
default:
@@ -1689,6 +1741,54 @@
rdev->config.evergreen.sc_hiz_tile_fifo_size = 0x30;
rdev->config.evergreen.sc_earlyz_tile_fifo_size = 0x130;
break;
+ case CHIP_SUMO:
+ rdev->config.evergreen.num_ses = 1;
+ rdev->config.evergreen.max_pipes = 4;
+ rdev->config.evergreen.max_tile_pipes = 2;
+ if (rdev->pdev->device == 0x9648)
+ rdev->config.evergreen.max_simds = 3;
+ else if ((rdev->pdev->device == 0x9647) ||
+ (rdev->pdev->device == 0x964a))
+ rdev->config.evergreen.max_simds = 4;
+ else
+ rdev->config.evergreen.max_simds = 5;
+ rdev->config.evergreen.max_backends = 2 * rdev->config.evergreen.num_ses;
+ rdev->config.evergreen.max_gprs = 256;
+ rdev->config.evergreen.max_threads = 248;
+ rdev->config.evergreen.max_gs_threads = 32;
+ rdev->config.evergreen.max_stack_entries = 256;
+ rdev->config.evergreen.sx_num_of_sets = 4;
+ rdev->config.evergreen.sx_max_export_size = 256;
+ rdev->config.evergreen.sx_max_export_pos_size = 64;
+ rdev->config.evergreen.sx_max_export_smx_size = 192;
+ rdev->config.evergreen.max_hw_contexts = 8;
+ rdev->config.evergreen.sq_num_cf_insts = 2;
+
+ rdev->config.evergreen.sc_prim_fifo_size = 0x40;
+ rdev->config.evergreen.sc_hiz_tile_fifo_size = 0x30;
+ rdev->config.evergreen.sc_earlyz_tile_fifo_size = 0x130;
+ break;
+ case CHIP_SUMO2:
+ rdev->config.evergreen.num_ses = 1;
+ rdev->config.evergreen.max_pipes = 4;
+ rdev->config.evergreen.max_tile_pipes = 4;
+ rdev->config.evergreen.max_simds = 2;
+ rdev->config.evergreen.max_backends = 1 * rdev->config.evergreen.num_ses;
+ rdev->config.evergreen.max_gprs = 256;
+ rdev->config.evergreen.max_threads = 248;
+ rdev->config.evergreen.max_gs_threads = 32;
+ rdev->config.evergreen.max_stack_entries = 512;
+ rdev->config.evergreen.sx_num_of_sets = 4;
+ rdev->config.evergreen.sx_max_export_size = 256;
+ rdev->config.evergreen.sx_max_export_pos_size = 64;
+ rdev->config.evergreen.sx_max_export_smx_size = 192;
+ rdev->config.evergreen.max_hw_contexts = 8;
+ rdev->config.evergreen.sq_num_cf_insts = 2;
+
+ rdev->config.evergreen.sc_prim_fifo_size = 0x40;
+ rdev->config.evergreen.sc_hiz_tile_fifo_size = 0x30;
+ rdev->config.evergreen.sc_earlyz_tile_fifo_size = 0x130;
+ break;
case CHIP_BARTS:
rdev->config.evergreen.num_ses = 2;
rdev->config.evergreen.max_pipes = 4;
@@ -1900,7 +2000,7 @@
gb_backend_map = 0x66442200;
break;
case CHIP_JUNIPER:
- gb_backend_map = 0x00006420;
+ gb_backend_map = 0x00002200;
break;
default:
gb_backend_map =
@@ -1936,9 +2036,9 @@
rdev->config.evergreen.tile_config |= (3 << 0);
break;
}
- /* num banks is 8 on all fusion asics */
+ /* num banks is 8 on all fusion asics. 0 = 4, 1 = 8, 2 = 16 */
if (rdev->flags & RADEON_IS_IGP)
- rdev->config.evergreen.tile_config |= 8 << 4;
+ rdev->config.evergreen.tile_config |= 1 << 4;
else
rdev->config.evergreen.tile_config |=
((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) << 4;
@@ -2039,6 +2139,8 @@
switch (rdev->family) {
case CHIP_CEDAR:
case CHIP_PALM:
+ case CHIP_SUMO:
+ case CHIP_SUMO2:
case CHIP_CAICOS:
/* no vertex cache */
sq_config &= ~VC_ENABLE;
@@ -2060,6 +2162,8 @@
switch (rdev->family) {
case CHIP_CEDAR:
case CHIP_PALM:
+ case CHIP_SUMO:
+ case CHIP_SUMO2:
ps_thread_count = 96;
break;
default:
@@ -2099,6 +2203,8 @@
switch (rdev->family) {
case CHIP_CEDAR:
case CHIP_PALM:
+ case CHIP_SUMO:
+ case CHIP_SUMO2:
case CHIP_CAICOS:
vgt_cache_invalidation = CACHE_INVALIDATION(TC_ONLY);
break;
@@ -2165,7 +2271,10 @@
/* Get VRAM informations */
rdev->mc.vram_is_ddr = true;
- tmp = RREG32(MC_ARB_RAMCFG);
+ if (rdev->flags & RADEON_IS_IGP)
+ tmp = RREG32(FUS_MC_ARB_RAMCFG);
+ else
+ tmp = RREG32(MC_ARB_RAMCFG);
if (tmp & CHANSIZE_OVERRIDE) {
chansize = 16;
} else if (tmp & CHANSIZE_MASK) {
@@ -2331,18 +2440,22 @@
WREG32(GRBM_INT_CNTL, 0);
WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
- if (!(rdev->flags & RADEON_IS_IGP)) {
+ if (rdev->num_crtc >= 4) {
WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
+ }
+ if (rdev->num_crtc >= 6) {
WREG32(INT_MASK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0);
WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
}
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0);
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0);
- if (!(rdev->flags & RADEON_IS_IGP)) {
+ if (rdev->num_crtc >= 4) {
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0);
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0);
+ }
+ if (rdev->num_crtc >= 6) {
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, 0);
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
}
@@ -2461,19 +2574,25 @@
WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1);
WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2);
- if (!(rdev->flags & RADEON_IS_IGP)) {
+ if (rdev->num_crtc >= 4) {
WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, crtc3);
WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, crtc4);
+ }
+ if (rdev->num_crtc >= 6) {
WREG32(INT_MASK + EVERGREEN_CRTC4_REGISTER_OFFSET, crtc5);
WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6);
}
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1);
WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2);
- WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3);
- WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4);
- WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5);
- WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6);
+ if (rdev->num_crtc >= 4) {
+ WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3);
+ WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4);
+ }
+ if (rdev->num_crtc >= 6) {
+ WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5);
+ WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6);
+ }
WREG32(DC_HPD1_INT_CONTROL, hpd1);
WREG32(DC_HPD2_INT_CONTROL, hpd2);
@@ -2497,53 +2616,57 @@
rdev->irq.stat_regs.evergreen.disp_int_cont5 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE5);
rdev->irq.stat_regs.evergreen.d1grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET);
rdev->irq.stat_regs.evergreen.d2grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET);
- rdev->irq.stat_regs.evergreen.d3grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET);
- rdev->irq.stat_regs.evergreen.d4grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET);
- rdev->irq.stat_regs.evergreen.d5grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET);
- rdev->irq.stat_regs.evergreen.d6grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET);
+ if (rdev->num_crtc >= 4) {
+ rdev->irq.stat_regs.evergreen.d3grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET);
+ rdev->irq.stat_regs.evergreen.d4grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET);
+ }
+ if (rdev->num_crtc >= 6) {
+ rdev->irq.stat_regs.evergreen.d5grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET);
+ rdev->irq.stat_regs.evergreen.d6grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET);
+ }
if (rdev->irq.stat_regs.evergreen.d1grph_int & GRPH_PFLIP_INT_OCCURRED)
WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
if (rdev->irq.stat_regs.evergreen.d2grph_int & GRPH_PFLIP_INT_OCCURRED)
WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
- if (rdev->irq.stat_regs.evergreen.d3grph_int & GRPH_PFLIP_INT_OCCURRED)
- WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
- if (rdev->irq.stat_regs.evergreen.d4grph_int & GRPH_PFLIP_INT_OCCURRED)
- WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
- if (rdev->irq.stat_regs.evergreen.d5grph_int & GRPH_PFLIP_INT_OCCURRED)
- WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
- if (rdev->irq.stat_regs.evergreen.d6grph_int & GRPH_PFLIP_INT_OCCURRED)
- WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
-
if (rdev->irq.stat_regs.evergreen.disp_int & LB_D1_VBLANK_INTERRUPT)
WREG32(VBLANK_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, VBLANK_ACK);
if (rdev->irq.stat_regs.evergreen.disp_int & LB_D1_VLINE_INTERRUPT)
WREG32(VLINE_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, VLINE_ACK);
-
if (rdev->irq.stat_regs.evergreen.disp_int_cont & LB_D2_VBLANK_INTERRUPT)
WREG32(VBLANK_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, VBLANK_ACK);
if (rdev->irq.stat_regs.evergreen.disp_int_cont & LB_D2_VLINE_INTERRUPT)
WREG32(VLINE_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, VLINE_ACK);
- if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VBLANK_INTERRUPT)
- WREG32(VBLANK_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VBLANK_ACK);
- if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VLINE_INTERRUPT)
- WREG32(VLINE_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VLINE_ACK);
+ if (rdev->num_crtc >= 4) {
+ if (rdev->irq.stat_regs.evergreen.d3grph_int & GRPH_PFLIP_INT_OCCURRED)
+ WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
+ if (rdev->irq.stat_regs.evergreen.d4grph_int & GRPH_PFLIP_INT_OCCURRED)
+ WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
+ if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VBLANK_INTERRUPT)
+ WREG32(VBLANK_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VBLANK_ACK);
+ if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VLINE_INTERRUPT)
+ WREG32(VLINE_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VLINE_ACK);
+ if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VBLANK_INTERRUPT)
+ WREG32(VBLANK_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VBLANK_ACK);
+ if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VLINE_INTERRUPT)
+ WREG32(VLINE_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VLINE_ACK);
+ }
- if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VBLANK_INTERRUPT)
- WREG32(VBLANK_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VBLANK_ACK);
- if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VLINE_INTERRUPT)
- WREG32(VLINE_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VLINE_ACK);
-
- if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VBLANK_INTERRUPT)
- WREG32(VBLANK_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VBLANK_ACK);
- if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VLINE_INTERRUPT)
- WREG32(VLINE_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VLINE_ACK);
-
- if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VBLANK_INTERRUPT)
- WREG32(VBLANK_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VBLANK_ACK);
- if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VLINE_INTERRUPT)
- WREG32(VLINE_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VLINE_ACK);
+ if (rdev->num_crtc >= 6) {
+ if (rdev->irq.stat_regs.evergreen.d5grph_int & GRPH_PFLIP_INT_OCCURRED)
+ WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
+ if (rdev->irq.stat_regs.evergreen.d6grph_int & GRPH_PFLIP_INT_OCCURRED)
+ WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR);
+ if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VBLANK_INTERRUPT)
+ WREG32(VBLANK_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VBLANK_ACK);
+ if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VLINE_INTERRUPT)
+ WREG32(VLINE_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VLINE_ACK);
+ if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VBLANK_INTERRUPT)
+ WREG32(VBLANK_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VBLANK_ACK);
+ if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VLINE_INTERRUPT)
+ WREG32(VLINE_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VLINE_ACK);
+ }
if (rdev->irq.stat_regs.evergreen.disp_int & DC_HPD1_INTERRUPT) {
tmp = RREG32(DC_HPD1_INT_CONTROL);
@@ -2618,28 +2741,25 @@
int evergreen_irq_process(struct radeon_device *rdev)
{
- u32 wptr = evergreen_get_ih_wptr(rdev);
- u32 rptr = rdev->ih.rptr;
+ u32 wptr;
+ u32 rptr;
u32 src_id, src_data;
u32 ring_index;
unsigned long flags;
bool queue_hotplug = false;
- DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr);
- if (!rdev->ih.enabled)
+ if (!rdev->ih.enabled || rdev->shutdown)
return IRQ_NONE;
- spin_lock_irqsave(&rdev->ih.lock, flags);
+ wptr = evergreen_get_ih_wptr(rdev);
+ rptr = rdev->ih.rptr;
+ DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr);
+ spin_lock_irqsave(&rdev->ih.lock, flags);
if (rptr == wptr) {
spin_unlock_irqrestore(&rdev->ih.lock, flags);
return IRQ_NONE;
}
- if (rdev->shutdown) {
- spin_unlock_irqrestore(&rdev->ih.lock, flags);
- return IRQ_NONE;
- }
-
restart_ih:
/* display interrupts */
evergreen_irq_ack(rdev);
@@ -2868,7 +2988,7 @@
radeon_fence_process(rdev);
break;
case 233: /* GUI IDLE */
- DRM_DEBUG("IH: CP EOP\n");
+ DRM_DEBUG("IH: GUI idle\n");
rdev->pm.gui_idle = true;
wake_up(&rdev->irq.idle_queue);
break;
@@ -3154,6 +3274,7 @@
r700_cp_fini(rdev);
r600_irq_fini(rdev);
radeon_wb_fini(rdev);
+ radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
evergreen_pcie_gart_fini(rdev);
radeon_gem_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/evergreen_blit_kms.c b/drivers/gpu/drm/radeon/evergreen_blit_kms.c
index ba06a69..2eb2518 100644
--- a/drivers/gpu/drm/radeon/evergreen_blit_kms.c
+++ b/drivers/gpu/drm/radeon/evergreen_blit_kms.c
@@ -31,6 +31,7 @@
#include "evergreend.h"
#include "evergreen_blit_shaders.h"
+#include "cayman_blit_shaders.h"
#define DI_PT_RECTLIST 0x11
#define DI_INDEX_SIZE_16_BIT 0x0
@@ -152,6 +153,8 @@
if ((rdev->family == CHIP_CEDAR) ||
(rdev->family == CHIP_PALM) ||
+ (rdev->family == CHIP_SUMO) ||
+ (rdev->family == CHIP_SUMO2) ||
(rdev->family == CHIP_CAICOS))
cp_set_surface_sync(rdev,
PACKET3_TC_ACTION_ENA, 48, gpu_addr);
@@ -199,6 +202,16 @@
set_scissors(struct radeon_device *rdev, int x1, int y1,
int x2, int y2)
{
+ /* workaround some hw bugs */
+ if (x2 == 0)
+ x1 = 1;
+ if (y2 == 0)
+ y1 = 1;
+ if (rdev->family == CHIP_CAYMAN) {
+ if ((x2 == 1) && (y2 == 1))
+ x2 = 2;
+ }
+
radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONTEXT_REG, 2));
radeon_ring_write(rdev, (PA_SC_SCREEN_SCISSOR_TL - PACKET3_SET_CONTEXT_REG_START) >> 2);
radeon_ring_write(rdev, (x1 << 0) | (y1 << 16));
@@ -239,7 +252,7 @@
}
-/* emits 36 */
+/* emits 39 */
static void
set_default_state(struct radeon_device *rdev)
{
@@ -255,238 +268,289 @@
u64 gpu_addr;
int dwords;
- switch (rdev->family) {
- case CHIP_CEDAR:
- default:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 96;
- num_vs_threads = 16;
- num_gs_threads = 16;
- num_es_threads = 16;
- num_hs_threads = 16;
- num_ls_threads = 16;
- num_ps_stack_entries = 42;
- num_vs_stack_entries = 42;
- num_gs_stack_entries = 42;
- num_es_stack_entries = 42;
- num_hs_stack_entries = 42;
- num_ls_stack_entries = 42;
- break;
- case CHIP_REDWOOD:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 128;
- num_vs_threads = 20;
- num_gs_threads = 20;
- num_es_threads = 20;
- num_hs_threads = 20;
- num_ls_threads = 20;
- num_ps_stack_entries = 42;
- num_vs_stack_entries = 42;
- num_gs_stack_entries = 42;
- num_es_stack_entries = 42;
- num_hs_stack_entries = 42;
- num_ls_stack_entries = 42;
- break;
- case CHIP_JUNIPER:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 128;
- num_vs_threads = 20;
- num_gs_threads = 20;
- num_es_threads = 20;
- num_hs_threads = 20;
- num_ls_threads = 20;
- num_ps_stack_entries = 85;
- num_vs_stack_entries = 85;
- num_gs_stack_entries = 85;
- num_es_stack_entries = 85;
- num_hs_stack_entries = 85;
- num_ls_stack_entries = 85;
- break;
- case CHIP_CYPRESS:
- case CHIP_HEMLOCK:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 128;
- num_vs_threads = 20;
- num_gs_threads = 20;
- num_es_threads = 20;
- num_hs_threads = 20;
- num_ls_threads = 20;
- num_ps_stack_entries = 85;
- num_vs_stack_entries = 85;
- num_gs_stack_entries = 85;
- num_es_stack_entries = 85;
- num_hs_stack_entries = 85;
- num_ls_stack_entries = 85;
- break;
- case CHIP_PALM:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 96;
- num_vs_threads = 16;
- num_gs_threads = 16;
- num_es_threads = 16;
- num_hs_threads = 16;
- num_ls_threads = 16;
- num_ps_stack_entries = 42;
- num_vs_stack_entries = 42;
- num_gs_stack_entries = 42;
- num_es_stack_entries = 42;
- num_hs_stack_entries = 42;
- num_ls_stack_entries = 42;
- break;
- case CHIP_BARTS:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 128;
- num_vs_threads = 20;
- num_gs_threads = 20;
- num_es_threads = 20;
- num_hs_threads = 20;
- num_ls_threads = 20;
- num_ps_stack_entries = 85;
- num_vs_stack_entries = 85;
- num_gs_stack_entries = 85;
- num_es_stack_entries = 85;
- num_hs_stack_entries = 85;
- num_ls_stack_entries = 85;
- break;
- case CHIP_TURKS:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 128;
- num_vs_threads = 20;
- num_gs_threads = 20;
- num_es_threads = 20;
- num_hs_threads = 20;
- num_ls_threads = 20;
- num_ps_stack_entries = 42;
- num_vs_stack_entries = 42;
- num_gs_stack_entries = 42;
- num_es_stack_entries = 42;
- num_hs_stack_entries = 42;
- num_ls_stack_entries = 42;
- break;
- case CHIP_CAICOS:
- num_ps_gprs = 93;
- num_vs_gprs = 46;
- num_temp_gprs = 4;
- num_gs_gprs = 31;
- num_es_gprs = 31;
- num_hs_gprs = 23;
- num_ls_gprs = 23;
- num_ps_threads = 128;
- num_vs_threads = 10;
- num_gs_threads = 10;
- num_es_threads = 10;
- num_hs_threads = 10;
- num_ls_threads = 10;
- num_ps_stack_entries = 42;
- num_vs_stack_entries = 42;
- num_gs_stack_entries = 42;
- num_es_stack_entries = 42;
- num_hs_stack_entries = 42;
- num_ls_stack_entries = 42;
- break;
- }
-
- if ((rdev->family == CHIP_CEDAR) ||
- (rdev->family == CHIP_PALM) ||
- (rdev->family == CHIP_CAICOS))
- sq_config = 0;
- else
- sq_config = VC_ENABLE;
-
- sq_config |= (EXPORT_SRC_C |
- CS_PRIO(0) |
- LS_PRIO(0) |
- HS_PRIO(0) |
- PS_PRIO(0) |
- VS_PRIO(1) |
- GS_PRIO(2) |
- ES_PRIO(3));
-
- sq_gpr_resource_mgmt_1 = (NUM_PS_GPRS(num_ps_gprs) |
- NUM_VS_GPRS(num_vs_gprs) |
- NUM_CLAUSE_TEMP_GPRS(num_temp_gprs));
- sq_gpr_resource_mgmt_2 = (NUM_GS_GPRS(num_gs_gprs) |
- NUM_ES_GPRS(num_es_gprs));
- sq_gpr_resource_mgmt_3 = (NUM_HS_GPRS(num_hs_gprs) |
- NUM_LS_GPRS(num_ls_gprs));
- sq_thread_resource_mgmt = (NUM_PS_THREADS(num_ps_threads) |
- NUM_VS_THREADS(num_vs_threads) |
- NUM_GS_THREADS(num_gs_threads) |
- NUM_ES_THREADS(num_es_threads));
- sq_thread_resource_mgmt_2 = (NUM_HS_THREADS(num_hs_threads) |
- NUM_LS_THREADS(num_ls_threads));
- sq_stack_resource_mgmt_1 = (NUM_PS_STACK_ENTRIES(num_ps_stack_entries) |
- NUM_VS_STACK_ENTRIES(num_vs_stack_entries));
- sq_stack_resource_mgmt_2 = (NUM_GS_STACK_ENTRIES(num_gs_stack_entries) |
- NUM_ES_STACK_ENTRIES(num_es_stack_entries));
- sq_stack_resource_mgmt_3 = (NUM_HS_STACK_ENTRIES(num_hs_stack_entries) |
- NUM_LS_STACK_ENTRIES(num_ls_stack_entries));
-
/* set clear context state */
radeon_ring_write(rdev, PACKET3(PACKET3_CLEAR_STATE, 0));
radeon_ring_write(rdev, 0);
- /* disable dyn gprs */
- radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1));
- radeon_ring_write(rdev, (SQ_DYN_GPR_CNTL_PS_FLUSH_REQ - PACKET3_SET_CONFIG_REG_START) >> 2);
- radeon_ring_write(rdev, 0);
+ if (rdev->family < CHIP_CAYMAN) {
+ switch (rdev->family) {
+ case CHIP_CEDAR:
+ default:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 96;
+ num_vs_threads = 16;
+ num_gs_threads = 16;
+ num_es_threads = 16;
+ num_hs_threads = 16;
+ num_ls_threads = 16;
+ num_ps_stack_entries = 42;
+ num_vs_stack_entries = 42;
+ num_gs_stack_entries = 42;
+ num_es_stack_entries = 42;
+ num_hs_stack_entries = 42;
+ num_ls_stack_entries = 42;
+ break;
+ case CHIP_REDWOOD:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 128;
+ num_vs_threads = 20;
+ num_gs_threads = 20;
+ num_es_threads = 20;
+ num_hs_threads = 20;
+ num_ls_threads = 20;
+ num_ps_stack_entries = 42;
+ num_vs_stack_entries = 42;
+ num_gs_stack_entries = 42;
+ num_es_stack_entries = 42;
+ num_hs_stack_entries = 42;
+ num_ls_stack_entries = 42;
+ break;
+ case CHIP_JUNIPER:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 128;
+ num_vs_threads = 20;
+ num_gs_threads = 20;
+ num_es_threads = 20;
+ num_hs_threads = 20;
+ num_ls_threads = 20;
+ num_ps_stack_entries = 85;
+ num_vs_stack_entries = 85;
+ num_gs_stack_entries = 85;
+ num_es_stack_entries = 85;
+ num_hs_stack_entries = 85;
+ num_ls_stack_entries = 85;
+ break;
+ case CHIP_CYPRESS:
+ case CHIP_HEMLOCK:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 128;
+ num_vs_threads = 20;
+ num_gs_threads = 20;
+ num_es_threads = 20;
+ num_hs_threads = 20;
+ num_ls_threads = 20;
+ num_ps_stack_entries = 85;
+ num_vs_stack_entries = 85;
+ num_gs_stack_entries = 85;
+ num_es_stack_entries = 85;
+ num_hs_stack_entries = 85;
+ num_ls_stack_entries = 85;
+ break;
+ case CHIP_PALM:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 96;
+ num_vs_threads = 16;
+ num_gs_threads = 16;
+ num_es_threads = 16;
+ num_hs_threads = 16;
+ num_ls_threads = 16;
+ num_ps_stack_entries = 42;
+ num_vs_stack_entries = 42;
+ num_gs_stack_entries = 42;
+ num_es_stack_entries = 42;
+ num_hs_stack_entries = 42;
+ num_ls_stack_entries = 42;
+ break;
+ case CHIP_SUMO:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 96;
+ num_vs_threads = 25;
+ num_gs_threads = 25;
+ num_es_threads = 25;
+ num_hs_threads = 25;
+ num_ls_threads = 25;
+ num_ps_stack_entries = 42;
+ num_vs_stack_entries = 42;
+ num_gs_stack_entries = 42;
+ num_es_stack_entries = 42;
+ num_hs_stack_entries = 42;
+ num_ls_stack_entries = 42;
+ break;
+ case CHIP_SUMO2:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 96;
+ num_vs_threads = 25;
+ num_gs_threads = 25;
+ num_es_threads = 25;
+ num_hs_threads = 25;
+ num_ls_threads = 25;
+ num_ps_stack_entries = 85;
+ num_vs_stack_entries = 85;
+ num_gs_stack_entries = 85;
+ num_es_stack_entries = 85;
+ num_hs_stack_entries = 85;
+ num_ls_stack_entries = 85;
+ break;
+ case CHIP_BARTS:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 128;
+ num_vs_threads = 20;
+ num_gs_threads = 20;
+ num_es_threads = 20;
+ num_hs_threads = 20;
+ num_ls_threads = 20;
+ num_ps_stack_entries = 85;
+ num_vs_stack_entries = 85;
+ num_gs_stack_entries = 85;
+ num_es_stack_entries = 85;
+ num_hs_stack_entries = 85;
+ num_ls_stack_entries = 85;
+ break;
+ case CHIP_TURKS:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 128;
+ num_vs_threads = 20;
+ num_gs_threads = 20;
+ num_es_threads = 20;
+ num_hs_threads = 20;
+ num_ls_threads = 20;
+ num_ps_stack_entries = 42;
+ num_vs_stack_entries = 42;
+ num_gs_stack_entries = 42;
+ num_es_stack_entries = 42;
+ num_hs_stack_entries = 42;
+ num_ls_stack_entries = 42;
+ break;
+ case CHIP_CAICOS:
+ num_ps_gprs = 93;
+ num_vs_gprs = 46;
+ num_temp_gprs = 4;
+ num_gs_gprs = 31;
+ num_es_gprs = 31;
+ num_hs_gprs = 23;
+ num_ls_gprs = 23;
+ num_ps_threads = 128;
+ num_vs_threads = 10;
+ num_gs_threads = 10;
+ num_es_threads = 10;
+ num_hs_threads = 10;
+ num_ls_threads = 10;
+ num_ps_stack_entries = 42;
+ num_vs_stack_entries = 42;
+ num_gs_stack_entries = 42;
+ num_es_stack_entries = 42;
+ num_hs_stack_entries = 42;
+ num_ls_stack_entries = 42;
+ break;
+ }
- /* SQ config */
- radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 11));
- radeon_ring_write(rdev, (SQ_CONFIG - PACKET3_SET_CONFIG_REG_START) >> 2);
- radeon_ring_write(rdev, sq_config);
- radeon_ring_write(rdev, sq_gpr_resource_mgmt_1);
- radeon_ring_write(rdev, sq_gpr_resource_mgmt_2);
- radeon_ring_write(rdev, sq_gpr_resource_mgmt_3);
- radeon_ring_write(rdev, 0);
- radeon_ring_write(rdev, 0);
- radeon_ring_write(rdev, sq_thread_resource_mgmt);
- radeon_ring_write(rdev, sq_thread_resource_mgmt_2);
- radeon_ring_write(rdev, sq_stack_resource_mgmt_1);
- radeon_ring_write(rdev, sq_stack_resource_mgmt_2);
- radeon_ring_write(rdev, sq_stack_resource_mgmt_3);
+ if ((rdev->family == CHIP_CEDAR) ||
+ (rdev->family == CHIP_PALM) ||
+ (rdev->family == CHIP_SUMO) ||
+ (rdev->family == CHIP_SUMO2) ||
+ (rdev->family == CHIP_CAICOS))
+ sq_config = 0;
+ else
+ sq_config = VC_ENABLE;
+
+ sq_config |= (EXPORT_SRC_C |
+ CS_PRIO(0) |
+ LS_PRIO(0) |
+ HS_PRIO(0) |
+ PS_PRIO(0) |
+ VS_PRIO(1) |
+ GS_PRIO(2) |
+ ES_PRIO(3));
+
+ sq_gpr_resource_mgmt_1 = (NUM_PS_GPRS(num_ps_gprs) |
+ NUM_VS_GPRS(num_vs_gprs) |
+ NUM_CLAUSE_TEMP_GPRS(num_temp_gprs));
+ sq_gpr_resource_mgmt_2 = (NUM_GS_GPRS(num_gs_gprs) |
+ NUM_ES_GPRS(num_es_gprs));
+ sq_gpr_resource_mgmt_3 = (NUM_HS_GPRS(num_hs_gprs) |
+ NUM_LS_GPRS(num_ls_gprs));
+ sq_thread_resource_mgmt = (NUM_PS_THREADS(num_ps_threads) |
+ NUM_VS_THREADS(num_vs_threads) |
+ NUM_GS_THREADS(num_gs_threads) |
+ NUM_ES_THREADS(num_es_threads));
+ sq_thread_resource_mgmt_2 = (NUM_HS_THREADS(num_hs_threads) |
+ NUM_LS_THREADS(num_ls_threads));
+ sq_stack_resource_mgmt_1 = (NUM_PS_STACK_ENTRIES(num_ps_stack_entries) |
+ NUM_VS_STACK_ENTRIES(num_vs_stack_entries));
+ sq_stack_resource_mgmt_2 = (NUM_GS_STACK_ENTRIES(num_gs_stack_entries) |
+ NUM_ES_STACK_ENTRIES(num_es_stack_entries));
+ sq_stack_resource_mgmt_3 = (NUM_HS_STACK_ENTRIES(num_hs_stack_entries) |
+ NUM_LS_STACK_ENTRIES(num_ls_stack_entries));
+
+ /* disable dyn gprs */
+ radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1));
+ radeon_ring_write(rdev, (SQ_DYN_GPR_CNTL_PS_FLUSH_REQ - PACKET3_SET_CONFIG_REG_START) >> 2);
+ radeon_ring_write(rdev, 0);
+
+ /* setup LDS */
+ radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1));
+ radeon_ring_write(rdev, (SQ_LDS_RESOURCE_MGMT - PACKET3_SET_CONFIG_REG_START) >> 2);
+ radeon_ring_write(rdev, 0x10001000);
+
+ /* SQ config */
+ radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 11));
+ radeon_ring_write(rdev, (SQ_CONFIG - PACKET3_SET_CONFIG_REG_START) >> 2);
+ radeon_ring_write(rdev, sq_config);
+ radeon_ring_write(rdev, sq_gpr_resource_mgmt_1);
+ radeon_ring_write(rdev, sq_gpr_resource_mgmt_2);
+ radeon_ring_write(rdev, sq_gpr_resource_mgmt_3);
+ radeon_ring_write(rdev, 0);
+ radeon_ring_write(rdev, 0);
+ radeon_ring_write(rdev, sq_thread_resource_mgmt);
+ radeon_ring_write(rdev, sq_thread_resource_mgmt_2);
+ radeon_ring_write(rdev, sq_stack_resource_mgmt_1);
+ radeon_ring_write(rdev, sq_stack_resource_mgmt_2);
+ radeon_ring_write(rdev, sq_stack_resource_mgmt_3);
+ }
/* CONTEXT_CONTROL */
radeon_ring_write(rdev, 0xc0012800);
@@ -560,7 +624,10 @@
mutex_init(&rdev->r600_blit.mutex);
rdev->r600_blit.state_offset = 0;
- rdev->r600_blit.state_len = evergreen_default_size;
+ if (rdev->family < CHIP_CAYMAN)
+ rdev->r600_blit.state_len = evergreen_default_size;
+ else
+ rdev->r600_blit.state_len = cayman_default_size;
dwords = rdev->r600_blit.state_len;
while (dwords & 0xf) {
@@ -572,11 +639,17 @@
obj_size = ALIGN(obj_size, 256);
rdev->r600_blit.vs_offset = obj_size;
- obj_size += evergreen_vs_size * 4;
+ if (rdev->family < CHIP_CAYMAN)
+ obj_size += evergreen_vs_size * 4;
+ else
+ obj_size += cayman_vs_size * 4;
obj_size = ALIGN(obj_size, 256);
rdev->r600_blit.ps_offset = obj_size;
- obj_size += evergreen_ps_size * 4;
+ if (rdev->family < CHIP_CAYMAN)
+ obj_size += evergreen_ps_size * 4;
+ else
+ obj_size += cayman_ps_size * 4;
obj_size = ALIGN(obj_size, 256);
r = radeon_bo_create(rdev, obj_size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
@@ -599,16 +672,29 @@
return r;
}
- memcpy_toio(ptr + rdev->r600_blit.state_offset,
- evergreen_default_state, rdev->r600_blit.state_len * 4);
+ if (rdev->family < CHIP_CAYMAN) {
+ memcpy_toio(ptr + rdev->r600_blit.state_offset,
+ evergreen_default_state, rdev->r600_blit.state_len * 4);
- if (num_packet2s)
- memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4),
- packet2s, num_packet2s * 4);
- for (i = 0; i < evergreen_vs_size; i++)
- *(u32 *)((unsigned long)ptr + rdev->r600_blit.vs_offset + i * 4) = cpu_to_le32(evergreen_vs[i]);
- for (i = 0; i < evergreen_ps_size; i++)
- *(u32 *)((unsigned long)ptr + rdev->r600_blit.ps_offset + i * 4) = cpu_to_le32(evergreen_ps[i]);
+ if (num_packet2s)
+ memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4),
+ packet2s, num_packet2s * 4);
+ for (i = 0; i < evergreen_vs_size; i++)
+ *(u32 *)((unsigned long)ptr + rdev->r600_blit.vs_offset + i * 4) = cpu_to_le32(evergreen_vs[i]);
+ for (i = 0; i < evergreen_ps_size; i++)
+ *(u32 *)((unsigned long)ptr + rdev->r600_blit.ps_offset + i * 4) = cpu_to_le32(evergreen_ps[i]);
+ } else {
+ memcpy_toio(ptr + rdev->r600_blit.state_offset,
+ cayman_default_state, rdev->r600_blit.state_len * 4);
+
+ if (num_packet2s)
+ memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4),
+ packet2s, num_packet2s * 4);
+ for (i = 0; i < cayman_vs_size; i++)
+ *(u32 *)((unsigned long)ptr + rdev->r600_blit.vs_offset + i * 4) = cpu_to_le32(cayman_vs[i]);
+ for (i = 0; i < cayman_ps_size; i++)
+ *(u32 *)((unsigned long)ptr + rdev->r600_blit.ps_offset + i * 4) = cpu_to_le32(cayman_ps[i]);
+ }
radeon_bo_kunmap(rdev->r600_blit.shader_obj);
radeon_bo_unreserve(rdev->r600_blit.shader_obj);
@@ -692,7 +778,7 @@
/* calculate number of loops correctly */
ring_size = num_loops * dwords_per_loop;
/* set default + shaders */
- ring_size += 52; /* shaders + def state */
+ ring_size += 55; /* shaders + def state */
ring_size += 10; /* fence emit for VB IB */
ring_size += 5; /* done copy */
ring_size += 10; /* fence emit for done copy */
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index f37e91e..b7b2714 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -168,10 +168,16 @@
#define SE_DB_BUSY (1 << 30)
#define SE_CB_BUSY (1 << 31)
/* evergreen */
+#define CG_THERMAL_CTRL 0x72c
+#define TOFFSET_MASK 0x00003FE0
+#define TOFFSET_SHIFT 5
#define CG_MULT_THERMAL_STATUS 0x740
#define ASIC_T(x) ((x) << 16)
-#define ASIC_T_MASK 0x7FF0000
+#define ASIC_T_MASK 0x07FF0000
#define ASIC_T_SHIFT 16
+#define CG_TS0_STATUS 0x760
+#define TS0_ADC_DOUT_MASK 0x000003FF
+#define TS0_ADC_DOUT_SHIFT 0
/* APU */
#define CG_THERMAL_STATUS 0x678
@@ -460,7 +466,7 @@
#define IH_RB_WPTR_ADDR_LO 0x3e14
#define IH_CNTL 0x3e18
# define ENABLE_INTR (1 << 0)
-# define IH_MC_SWAP(x) ((x) << 2)
+# define IH_MC_SWAP(x) ((x) << 1)
# define IH_MC_SWAP_NONE 0
# define IH_MC_SWAP_16BIT 1
# define IH_MC_SWAP_32BIT 2
@@ -541,7 +547,7 @@
# define LB_D5_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD5_INTERRUPT (1 << 17)
# define DC_HPD5_RX_INTERRUPT (1 << 18)
-#define DISP_INTERRUPT_STATUS_CONTINUE5 0x6050
+#define DISP_INTERRUPT_STATUS_CONTINUE5 0x6150
# define LB_D6_VLINE_INTERRUPT (1 << 2)
# define LB_D6_VBLANK_INTERRUPT (1 << 3)
# define DC_HPD6_INTERRUPT (1 << 17)
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index b205ba1..559dbd4 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1387,14 +1387,12 @@
return r;
cayman_gpu_init(rdev);
-#if 0
- r = cayman_blit_init(rdev);
+ r = evergreen_blit_init(rdev);
if (r) {
- cayman_blit_fini(rdev);
+ evergreen_blit_fini(rdev);
rdev->asic->copy = NULL;
dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r);
}
-#endif
/* allocate wb buffer */
r = radeon_wb_init(rdev);
@@ -1452,7 +1450,7 @@
int cayman_suspend(struct radeon_device *rdev)
{
- /* int r; */
+ int r;
/* FIXME: we should wait for ring to be empty */
cayman_cp_enable(rdev, false);
@@ -1461,14 +1459,13 @@
radeon_wb_disable(rdev);
cayman_pcie_gart_disable(rdev);
-#if 0
/* unpin shaders bo */
r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false);
if (likely(r == 0)) {
radeon_bo_unpin(rdev->r600_blit.shader_obj);
radeon_bo_unreserve(rdev->r600_blit.shader_obj);
}
-#endif
+
return 0;
}
@@ -1580,10 +1577,11 @@
void cayman_fini(struct radeon_device *rdev)
{
- /* cayman_blit_fini(rdev); */
+ evergreen_blit_fini(rdev);
cayman_cp_fini(rdev);
r600_irq_fini(rdev);
radeon_wb_fini(rdev);
+ radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
cayman_pcie_gart_fini(rdev);
radeon_gem_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/nid.h b/drivers/gpu/drm/radeon/nid.h
index 9736746..4672869 100644
--- a/drivers/gpu/drm/radeon/nid.h
+++ b/drivers/gpu/drm/radeon/nid.h
@@ -320,7 +320,7 @@
#define CGTS_USER_TCC_DISABLE 0x914C
#define TCC_DISABLE_MASK 0xFFFF0000
#define TCC_DISABLE_SHIFT 16
-#define CGTS_SM_CTRL_REG 0x915C
+#define CGTS_SM_CTRL_REG 0x9150
#define OVERRIDE (1 << 21)
#define TA_CNTL_AUX 0x9508
diff --git a/drivers/gpu/drm/radeon/r100_track.h b/drivers/gpu/drm/radeon/r100_track.h
index 2fef9de..686f9dc 100644
--- a/drivers/gpu/drm/radeon/r100_track.h
+++ b/drivers/gpu/drm/radeon/r100_track.h
@@ -63,7 +63,7 @@
unsigned num_arrays;
unsigned max_indx;
unsigned color_channel_mask;
- struct r100_cs_track_array arrays[11];
+ struct r100_cs_track_array arrays[16];
struct r100_cs_track_cb cb[R300_MAX_CB];
struct r100_cs_track_cb zb;
struct r100_cs_track_cb aa;
@@ -146,6 +146,12 @@
ib = p->ib->ptr;
track = (struct r100_cs_track *)p->track;
c = radeon_get_ib_value(p, idx++) & 0x1F;
+ if (c > 16) {
+ DRM_ERROR("Only 16 vertex buffers are allowed %d\n",
+ pkt->opcode);
+ r100_cs_dump_packet(p, pkt);
+ return -EINVAL;
+ }
track->num_arrays = c;
for (i = 0; i < (c - 1); i+=2, idx+=3) {
r = r100_cs_packet_next_reloc(p, &reloc);
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 6f27593..bc54b26 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -87,6 +87,10 @@
MODULE_FIRMWARE("radeon/PALM_pfp.bin");
MODULE_FIRMWARE("radeon/PALM_me.bin");
MODULE_FIRMWARE("radeon/SUMO_rlc.bin");
+MODULE_FIRMWARE("radeon/SUMO_pfp.bin");
+MODULE_FIRMWARE("radeon/SUMO_me.bin");
+MODULE_FIRMWARE("radeon/SUMO2_pfp.bin");
+MODULE_FIRMWARE("radeon/SUMO2_me.bin");
int r600_debugfs_mc_info_init(struct radeon_device *rdev);
@@ -586,6 +590,9 @@
struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+ /* 0xff01 is a flag rather then an actual voltage */
+ if (voltage->voltage == 0xff01)
+ return;
if (voltage->voltage != rdev->pm.current_vddc) {
radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC);
rdev->pm.current_vddc = voltage->voltage;
@@ -2024,6 +2031,14 @@
chip_name = "PALM";
rlc_chip_name = "SUMO";
break;
+ case CHIP_SUMO:
+ chip_name = "SUMO";
+ rlc_chip_name = "SUMO";
+ break;
+ case CHIP_SUMO2:
+ chip_name = "SUMO2";
+ rlc_chip_name = "SUMO";
+ break;
default: BUG();
}
@@ -2613,6 +2628,7 @@
r600_cp_fini(rdev);
r600_irq_fini(rdev);
radeon_wb_fini(rdev);
+ radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
r600_pcie_gart_fini(rdev);
radeon_agp_fini(rdev);
@@ -3282,27 +3298,26 @@
int r600_irq_process(struct radeon_device *rdev)
{
- u32 wptr = r600_get_ih_wptr(rdev);
- u32 rptr = rdev->ih.rptr;
+ u32 wptr;
+ u32 rptr;
u32 src_id, src_data;
u32 ring_index;
unsigned long flags;
bool queue_hotplug = false;
- DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr);
- if (!rdev->ih.enabled)
+ if (!rdev->ih.enabled || rdev->shutdown)
return IRQ_NONE;
+ wptr = r600_get_ih_wptr(rdev);
+ rptr = rdev->ih.rptr;
+ DRM_DEBUG("r600_irq_process start: rptr %d, wptr %d\n", rptr, wptr);
+
spin_lock_irqsave(&rdev->ih.lock, flags);
if (rptr == wptr) {
spin_unlock_irqrestore(&rdev->ih.lock, flags);
return IRQ_NONE;
}
- if (rdev->shutdown) {
- spin_unlock_irqrestore(&rdev->ih.lock, flags);
- return IRQ_NONE;
- }
restart_ih:
/* display interrupts */
@@ -3432,7 +3447,7 @@
radeon_fence_process(rdev);
break;
case 233: /* GUI IDLE */
- DRM_DEBUG("IH: CP EOP\n");
+ DRM_DEBUG("IH: GUI idle\n");
rdev->pm.gui_idle = true;
wake_up(&rdev->irq.idle_queue);
break;
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index fd18be9..909bda8 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -71,20 +71,21 @@
u64 db_bo_mc;
};
-#define FMT_8_BIT(fmt, vc) [fmt] = { 1, 1, 1, vc }
-#define FMT_16_BIT(fmt, vc) [fmt] = { 1, 1, 2, vc }
-#define FMT_24_BIT(fmt) [fmt] = { 1, 1, 3, 0 }
-#define FMT_32_BIT(fmt, vc) [fmt] = { 1, 1, 4, vc }
-#define FMT_48_BIT(fmt) [fmt] = { 1, 1, 6, 0 }
-#define FMT_64_BIT(fmt, vc) [fmt] = { 1, 1, 8, vc }
-#define FMT_96_BIT(fmt) [fmt] = { 1, 1, 12, 0 }
-#define FMT_128_BIT(fmt, vc) [fmt] = { 1, 1, 16, vc }
+#define FMT_8_BIT(fmt, vc) [fmt] = { 1, 1, 1, vc, CHIP_R600 }
+#define FMT_16_BIT(fmt, vc) [fmt] = { 1, 1, 2, vc, CHIP_R600 }
+#define FMT_24_BIT(fmt) [fmt] = { 1, 1, 3, 0, CHIP_R600 }
+#define FMT_32_BIT(fmt, vc) [fmt] = { 1, 1, 4, vc, CHIP_R600 }
+#define FMT_48_BIT(fmt) [fmt] = { 1, 1, 6, 0, CHIP_R600 }
+#define FMT_64_BIT(fmt, vc) [fmt] = { 1, 1, 8, vc, CHIP_R600 }
+#define FMT_96_BIT(fmt) [fmt] = { 1, 1, 12, 0, CHIP_R600 }
+#define FMT_128_BIT(fmt, vc) [fmt] = { 1, 1, 16,vc, CHIP_R600 }
struct gpu_formats {
unsigned blockwidth;
unsigned blockheight;
unsigned blocksize;
unsigned valid_color;
+ enum radeon_family min_family;
};
static const struct gpu_formats color_formats_table[] = {
@@ -154,7 +155,11 @@
[V_038004_FMT_BC3] = { 4, 4, 16, 0 },
[V_038004_FMT_BC4] = { 4, 4, 8, 0 },
[V_038004_FMT_BC5] = { 4, 4, 16, 0},
+ [V_038004_FMT_BC6] = { 4, 4, 16, 0, CHIP_CEDAR}, /* Evergreen-only */
+ [V_038004_FMT_BC7] = { 4, 4, 16, 0, CHIP_CEDAR}, /* Evergreen-only */
+ /* The other Evergreen formats */
+ [V_038004_FMT_32_AS_32_32_32_32] = { 1, 1, 4, 0, CHIP_CEDAR},
};
static inline bool fmt_is_valid_color(u32 format)
@@ -168,11 +173,14 @@
return false;
}
-static inline bool fmt_is_valid_texture(u32 format)
+static inline bool fmt_is_valid_texture(u32 format, enum radeon_family family)
{
if (format >= ARRAY_SIZE(color_formats_table))
return false;
+ if (family < color_formats_table[format].min_family)
+ return false;
+
if (color_formats_table[format].blockwidth > 0)
return true;
@@ -1325,7 +1333,7 @@
return -EINVAL;
}
format = G_038004_DATA_FORMAT(word1);
- if (!fmt_is_valid_texture(format)) {
+ if (!fmt_is_valid_texture(format, p->family)) {
dev_warn(p->dev, "%s:%d texture invalid format %d\n",
__func__, __LINE__, format);
return -EINVAL;
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index b2b944bc..0245ae6 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -536,7 +536,7 @@
#define IH_RB_WPTR_ADDR_LO 0x3e14
#define IH_CNTL 0x3e18
# define ENABLE_INTR (1 << 0)
-# define IH_MC_SWAP(x) ((x) << 2)
+# define IH_MC_SWAP(x) ((x) << 1)
# define IH_MC_SWAP_NONE 0
# define IH_MC_SWAP_16BIT 1
# define IH_MC_SWAP_32BIT 2
@@ -1309,6 +1309,9 @@
#define V_038004_FMT_BC3 0x00000033
#define V_038004_FMT_BC4 0x00000034
#define V_038004_FMT_BC5 0x00000035
+#define V_038004_FMT_BC6 0x00000036
+#define V_038004_FMT_BC7 0x00000037
+#define V_038004_FMT_32_AS_32_32_32_32 0x00000038
#define R_038010_SQ_TEX_RESOURCE_WORD4_0 0x038010
#define S_038010_FORMAT_COMP_X(x) (((x) & 0x3) << 0)
#define G_038010_FORMAT_COMP_X(x) (((x) >> 0) & 0x3)
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index ba643b5..ef0e0e0 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -165,6 +165,7 @@
uint32_t default_sclk;
uint32_t default_dispclk;
uint32_t dp_extclk;
+ uint32_t max_pixel_clock;
};
/*
@@ -178,6 +179,7 @@
void radeon_combios_get_power_modes(struct radeon_device *rdev);
void radeon_atombios_get_power_modes(struct radeon_device *rdev);
void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 voltage_type);
+int radeon_atom_get_max_vddc(struct radeon_device *rdev, u16 *voltage);
void rs690_pm_info(struct radeon_device *rdev);
extern int rv6xx_get_temp(struct radeon_device *rdev);
extern int rv770_get_temp(struct radeon_device *rdev);
diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c
index d948265..b244962 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -906,9 +906,9 @@
.get_vblank_counter = &evergreen_get_vblank_counter,
.fence_ring_emit = &r600_fence_ring_emit,
.cs_parse = &evergreen_cs_parse,
- .copy_blit = NULL,
- .copy_dma = NULL,
- .copy = NULL,
+ .copy_blit = &evergreen_copy_blit,
+ .copy_dma = &evergreen_copy_blit,
+ .copy = &evergreen_copy_blit,
.get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
.get_memory_clock = &radeon_atom_get_memory_clock,
@@ -938,6 +938,13 @@
int radeon_asic_init(struct radeon_device *rdev)
{
radeon_register_accessor_init(rdev);
+
+ /* set the number of crtcs */
+ if (rdev->flags & RADEON_SINGLE_CRTC)
+ rdev->num_crtc = 1;
+ else
+ rdev->num_crtc = 2;
+
switch (rdev->family) {
case CHIP_R100:
case CHIP_RV100:
@@ -1017,18 +1024,32 @@
case CHIP_JUNIPER:
case CHIP_CYPRESS:
case CHIP_HEMLOCK:
+ /* set num crtcs */
+ if (rdev->family == CHIP_CEDAR)
+ rdev->num_crtc = 4;
+ else
+ rdev->num_crtc = 6;
rdev->asic = &evergreen_asic;
break;
case CHIP_PALM:
+ case CHIP_SUMO:
+ case CHIP_SUMO2:
rdev->asic = &sumo_asic;
break;
case CHIP_BARTS:
case CHIP_TURKS:
case CHIP_CAICOS:
+ /* set num crtcs */
+ if (rdev->family == CHIP_CAICOS)
+ rdev->num_crtc = 4;
+ else
+ rdev->num_crtc = 6;
rdev->asic = &btc_asic;
break;
case CHIP_CAYMAN:
rdev->asic = &cayman_asic;
+ /* set num crtcs */
+ rdev->num_crtc = 6;
break;
default:
/* FIXME: not supported yet */
@@ -1040,18 +1061,6 @@
rdev->asic->set_memory_clock = NULL;
}
- /* set the number of crtcs */
- if (rdev->flags & RADEON_SINGLE_CRTC)
- rdev->num_crtc = 1;
- else {
- if (ASIC_IS_DCE41(rdev))
- rdev->num_crtc = 2;
- else if (ASIC_IS_DCE4(rdev))
- rdev->num_crtc = 6;
- else
- rdev->num_crtc = 2;
- }
-
return 0;
}
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 90dfb2b..bf2b615 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -1246,6 +1246,10 @@
}
*dcpll = *p1pll;
+ rdev->clock.max_pixel_clock = le16_to_cpu(firmware_info->info.usMaxPixelClock);
+ if (rdev->clock.max_pixel_clock == 0)
+ rdev->clock.max_pixel_clock = 40000;
+
return true;
}
@@ -2316,6 +2320,14 @@
le16_to_cpu(clock_info->r600.usVDDC);
}
+ /* patch up vddc if necessary */
+ if (rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage == 0xff01) {
+ u16 vddc;
+
+ if (radeon_atom_get_max_vddc(rdev, &vddc) == 0)
+ rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage = vddc;
+ }
+
if (rdev->flags & RADEON_IS_IGP) {
/* skip invalid modes */
if (rdev->pm.power_state[state_index].clock_info[mode_index].sclk == 0)
@@ -2603,6 +2615,10 @@
if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
return;
+ /* 0xff01 is a flag rather then an actual voltage */
+ if (voltage_level == 0xff01)
+ return;
+
switch (crev) {
case 1:
args.v1.ucVoltageType = voltage_type;
@@ -2622,7 +2638,35 @@
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
+int radeon_atom_get_max_vddc(struct radeon_device *rdev,
+ u16 *voltage)
+{
+ union set_voltage args;
+ int index = GetIndexIntoMasterTable(COMMAND, SetVoltage);
+ u8 frev, crev;
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return -EINVAL;
+
+ switch (crev) {
+ case 1:
+ return -EINVAL;
+ case 2:
+ args.v2.ucVoltageType = SET_VOLTAGE_GET_MAX_VOLTAGE;
+ args.v2.ucVoltageMode = 0;
+ args.v2.usVoltageLevel = 0;
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+ *voltage = le16_to_cpu(args.v2.usVoltageLevel);
+ break;
+ default:
+ DRM_ERROR("Unknown table version %d, %d\n", frev, crev);
+ return -EINVAL;
+ }
+
+ return 0;
+}
void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev)
{
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index 1aba85c..229a20f 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -104,7 +104,7 @@
static bool radeon_atrm_get_bios(struct radeon_device *rdev)
{
int ret;
- int size = 64 * 1024;
+ int size = 256 * 1024;
int i;
if (!radeon_atrm_supported(rdev->pdev))
@@ -331,7 +331,7 @@
seprom_cntl1 = RREG32(RADEON_SEPROM_CNTL1);
viph_control = RREG32(RADEON_VIPH_CONTROL);
- bus_cntl = RREG32(RADEON_BUS_CNTL);
+ bus_cntl = RREG32(RV370_BUS_CNTL);
d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
@@ -350,7 +350,7 @@
WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
/* enable the rom */
- WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+ WREG32(RV370_BUS_CNTL, (bus_cntl & ~RV370_BUS_BIOS_DIS_ROM));
/* Disable VGA mode */
WREG32(AVIVO_D1VGA_CONTROL,
@@ -367,7 +367,7 @@
/* restore regs */
WREG32(RADEON_SEPROM_CNTL1, seprom_cntl1);
WREG32(RADEON_VIPH_CONTROL, viph_control);
- WREG32(RADEON_BUS_CNTL, bus_cntl);
+ WREG32(RV370_BUS_CNTL, bus_cntl);
WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
@@ -390,7 +390,10 @@
seprom_cntl1 = RREG32(RADEON_SEPROM_CNTL1);
viph_control = RREG32(RADEON_VIPH_CONTROL);
- bus_cntl = RREG32(RADEON_BUS_CNTL);
+ if (rdev->flags & RADEON_IS_PCIE)
+ bus_cntl = RREG32(RV370_BUS_CNTL);
+ else
+ bus_cntl = RREG32(RADEON_BUS_CNTL);
crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL);
crtc2_gen_cntl = 0;
crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
@@ -412,7 +415,10 @@
WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
/* enable the rom */
- WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+ if (rdev->flags & RADEON_IS_PCIE)
+ WREG32(RV370_BUS_CNTL, (bus_cntl & ~RV370_BUS_BIOS_DIS_ROM));
+ else
+ WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
/* Turn off mem requests and CRTC for both controllers */
WREG32(RADEON_CRTC_GEN_CNTL,
@@ -439,7 +445,10 @@
/* restore regs */
WREG32(RADEON_SEPROM_CNTL1, seprom_cntl1);
WREG32(RADEON_VIPH_CONTROL, viph_control);
- WREG32(RADEON_BUS_CNTL, bus_cntl);
+ if (rdev->flags & RADEON_IS_PCIE)
+ WREG32(RV370_BUS_CNTL, bus_cntl);
+ else
+ WREG32(RADEON_BUS_CNTL, bus_cntl);
WREG32(RADEON_CRTC_GEN_CNTL, crtc_gen_cntl);
if (!(rdev->flags & RADEON_SINGLE_CRTC)) {
WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c
index 5249af8..2d48e7a 100644
--- a/drivers/gpu/drm/radeon/radeon_clocks.c
+++ b/drivers/gpu/drm/radeon/radeon_clocks.c
@@ -117,7 +117,7 @@
p1pll->reference_div = RREG32_PLL(RADEON_PPLL_REF_DIV) & 0x3ff;
if (p1pll->reference_div < 2)
p1pll->reference_div = 12;
- p2pll->reference_div = p1pll->reference_div;
+ p2pll->reference_div = p1pll->reference_div;
/* These aren't in the device-tree */
if (rdev->family >= CHIP_R420) {
@@ -139,6 +139,8 @@
p2pll->pll_out_min = 12500;
p2pll->pll_out_max = 35000;
}
+ /* not sure what the max should be in all cases */
+ rdev->clock.max_pixel_clock = 35000;
spll->reference_freq = mpll->reference_freq = p1pll->reference_freq;
spll->reference_div = mpll->reference_div =
@@ -151,7 +153,7 @@
else
rdev->clock.default_sclk =
radeon_legacy_get_engine_clock(rdev);
-
+
val = of_get_property(dp, "ATY,MCLK", NULL);
if (val && *val)
rdev->clock.default_mclk = (*val) / 10;
@@ -160,7 +162,7 @@
radeon_legacy_get_memory_clock(rdev);
DRM_INFO("Using device-tree clock info\n");
-
+
return true;
}
#else
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 5b991f7..e459467 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -866,6 +866,11 @@
rdev->clock.default_sclk = sclk;
rdev->clock.default_mclk = mclk;
+ if (RBIOS32(pll_info + 0x16))
+ rdev->clock.max_pixel_clock = RBIOS32(pll_info + 0x16);
+ else
+ rdev->clock.max_pixel_clock = 35000; /* might need something asic specific */
+
return true;
}
return false;
@@ -1548,10 +1553,12 @@
(rdev->pdev->subsystem_device == 0x4a48)) {
/* Mac X800 */
rdev->mode_info.connector_table = CT_MAC_X800;
- } else if ((rdev->pdev->device == 0x4150) &&
+ } else if ((of_machine_is_compatible("PowerMac7,2") ||
+ of_machine_is_compatible("PowerMac7,3")) &&
+ (rdev->pdev->device == 0x4150) &&
(rdev->pdev->subsystem_vendor == 0x1002) &&
(rdev->pdev->subsystem_device == 0x4150)) {
- /* Mac G5 9600 */
+ /* Mac G5 tower 9600 */
rdev->mode_info.connector_table = CT_MAC_G5_9600;
} else
#endif /* CONFIG_PPC_PMAC */
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index ee1dccb..9792d4f 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -44,12 +44,20 @@
radeon_legacy_backlight_init(struct radeon_encoder *radeon_encoder,
struct drm_connector *drm_connector);
+bool radeon_connector_encoder_is_dp_bridge(struct drm_connector *connector);
+
void radeon_connector_hotplug(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ /* bail if the connector does not have hpd pin, e.g.,
+ * VGA, TV, etc.
+ */
+ if (radeon_connector->hpd.hpd == RADEON_HPD_NONE)
+ return;
+
radeon_hpd_set_polarity(rdev, radeon_connector->hpd.hpd);
/* powering up/down the eDP panel generates hpd events which
@@ -626,8 +634,14 @@
static int radeon_vga_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
+ struct drm_device *dev = connector->dev;
+ struct radeon_device *rdev = dev->dev_private;
+
/* XXX check mode bandwidth */
- /* XXX verify against max DAC output frequency */
+
+ if ((mode->clock / 10) > rdev->clock.max_pixel_clock)
+ return MODE_CLOCK_HIGH;
+
return MODE_OK;
}
@@ -830,6 +844,13 @@
if (!radeon_connector->edid) {
DRM_ERROR("%s: probed a monitor but no|invalid EDID\n",
drm_get_connector_name(connector));
+ /* rs690 seems to have a problem with connectors not existing and always
+ * return a block of 0's. If we see this just stop polling on this output */
+ if ((rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740) && radeon_connector->base.null_edid_counter) {
+ ret = connector_status_disconnected;
+ DRM_ERROR("%s: detected RS690 floating bus bug, stopping ddc detect\n", drm_get_connector_name(connector));
+ radeon_connector->ddc_bus = NULL;
+ }
} else {
radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL);
@@ -1015,6 +1036,11 @@
} else
return MODE_CLOCK_HIGH;
}
+
+ /* check against the max pixel clock */
+ if ((mode->clock / 10) > rdev->clock.max_pixel_clock)
+ return MODE_CLOCK_HIGH;
+
return MODE_OK;
}
@@ -1052,10 +1078,11 @@
{
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
struct radeon_connector_atom_dig *radeon_dig_connector = radeon_connector->con_priv;
+ struct drm_encoder *encoder = radeon_best_single_encoder(connector);
int ret;
- if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
- struct drm_encoder *encoder;
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_eDP) ||
+ (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) {
struct drm_display_mode *mode;
if (!radeon_dig_connector->edp_on)
@@ -1067,7 +1094,6 @@
ATOM_TRANSMITTER_ACTION_POWER_OFF);
if (ret > 0) {
- encoder = radeon_best_single_encoder(connector);
if (encoder) {
radeon_fixup_lvds_native_mode(encoder, connector);
/* add scaled modes */
@@ -1091,8 +1117,14 @@
/* add scaled modes */
radeon_add_common_modes(encoder, connector);
}
- } else
+ } else {
+ /* need to setup ddc on the bridge */
+ if (radeon_connector_encoder_is_dp_bridge(connector)) {
+ if (encoder)
+ radeon_atom_ext_encoder_setup_ddc(encoder);
+ }
ret = radeon_ddc_get_modes(radeon_connector);
+ }
return ret;
}
@@ -1176,14 +1208,15 @@
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
enum drm_connector_status ret = connector_status_disconnected;
struct radeon_connector_atom_dig *radeon_dig_connector = radeon_connector->con_priv;
+ struct drm_encoder *encoder = radeon_best_single_encoder(connector);
if (radeon_connector->edid) {
kfree(radeon_connector->edid);
radeon_connector->edid = NULL;
}
- if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
- struct drm_encoder *encoder = radeon_best_single_encoder(connector);
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_eDP) ||
+ (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) {
if (encoder) {
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
@@ -1203,6 +1236,11 @@
atombios_set_edp_panel_power(connector,
ATOM_TRANSMITTER_ACTION_POWER_OFF);
} else {
+ /* need to setup ddc on the bridge */
+ if (radeon_connector_encoder_is_dp_bridge(connector)) {
+ if (encoder)
+ radeon_atom_ext_encoder_setup_ddc(encoder);
+ }
radeon_dig_connector->dp_sink_type = radeon_dp_getsinktype(radeon_connector);
if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) {
ret = connector_status_connected;
@@ -1217,6 +1255,16 @@
ret = connector_status_connected;
}
}
+
+ if ((ret == connector_status_disconnected) &&
+ radeon_connector->dac_load_detect) {
+ struct drm_encoder *encoder = radeon_best_single_encoder(connector);
+ struct drm_encoder_helper_funcs *encoder_funcs;
+ if (encoder) {
+ encoder_funcs = encoder->helper_private;
+ ret = encoder_funcs->detect(encoder, connector);
+ }
+ }
}
radeon_connector_update_scratch_regs(connector, ret);
@@ -1231,7 +1279,8 @@
/* XXX check mode bandwidth */
- if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_eDP) ||
+ (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) {
struct drm_encoder *encoder = radeon_best_single_encoder(connector);
if ((mode->hdisplay < 320) || (mode->vdisplay < 240))
@@ -1241,7 +1290,7 @@
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
- /* AVIVO hardware supports downscaling modes larger than the panel
+ /* AVIVO hardware supports downscaling modes larger than the panel
* to the panel size, but I'm not sure this is desirable.
*/
if ((mode->hdisplay > native_mode->hdisplay) ||
@@ -1390,6 +1439,10 @@
default:
connector->interlace_allowed = true;
connector->doublescan_allowed = true;
+ radeon_connector->dac_load_detect = true;
+ drm_connector_attach_property(&radeon_connector->base,
+ rdev->mode_info.load_detect_property,
+ 1);
break;
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_DVID:
@@ -1411,6 +1464,12 @@
connector->doublescan_allowed = true;
else
connector->doublescan_allowed = false;
+ if (connector_type == DRM_MODE_CONNECTOR_DVII) {
+ radeon_connector->dac_load_detect = true;
+ drm_connector_attach_property(&radeon_connector->base,
+ rdev->mode_info.load_detect_property,
+ 1);
+ }
break;
case DRM_MODE_CONNECTOR_LVDS:
case DRM_MODE_CONNECTOR_eDP:
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index 8c19169..fae00c0 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -228,6 +228,7 @@
parser.filp = filp;
parser.rdev = rdev;
parser.dev = rdev->dev;
+ parser.family = rdev->family;
r = radeon_cs_parser_init(&parser, data);
if (r) {
DRM_ERROR("Failed to initialize parser !\n");
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 5b61364..7cfaa7e 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -82,6 +82,8 @@
"CYPRESS",
"HEMLOCK",
"PALM",
+ "SUMO",
+ "SUMO2",
"BARTS",
"TURKS",
"CAICOS",
@@ -213,6 +215,8 @@
return r;
}
+ /* clear wb memory */
+ memset((char *)rdev->wb.wb, 0, RADEON_GPU_PAGE_SIZE);
/* disable event_write fences */
rdev->wb.use_event = false;
/* disabled via module param */
@@ -752,6 +756,7 @@
dma_bits = rdev->need_dma32 ? 32 : 40;
r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(dma_bits));
if (r) {
+ rdev->need_dma32 = true;
printk(KERN_WARNING "radeon: No suitable DMA available.\n");
}
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index ae247eec..292f73f 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -264,6 +264,8 @@
radeon_bo_unreserve(work->old_rbo);
} else
DRM_ERROR("failed to reserve buffer after flip\n");
+
+ drm_gem_object_unreference_unlocked(&work->old_rbo->gem_base);
kfree(work);
}
@@ -371,6 +373,8 @@
new_radeon_fb = to_radeon_framebuffer(fb);
/* schedule unpin of the old buffer */
obj = old_radeon_fb->obj;
+ /* take a reference to the old object */
+ drm_gem_object_reference(obj);
rbo = gem_to_radeon_bo(obj);
work->old_rbo = rbo;
INIT_WORK(&work->work, radeon_unpin_work_func);
@@ -378,12 +382,9 @@
/* We borrow the event spin lock for protecting unpin_work */
spin_lock_irqsave(&dev->event_lock, flags);
if (radeon_crtc->unpin_work) {
- spin_unlock_irqrestore(&dev->event_lock, flags);
- kfree(work);
- radeon_fence_unref(&fence);
-
DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
- return -EBUSY;
+ r = -EBUSY;
+ goto unlock_free;
}
radeon_crtc->unpin_work = work;
radeon_crtc->deferred_flip_completion = 0;
@@ -497,6 +498,8 @@
pflip_cleanup:
spin_lock_irqsave(&dev->event_lock, flags);
radeon_crtc->unpin_work = NULL;
+unlock_free:
+ drm_gem_object_unreference_unlocked(old_radeon_fb->obj);
spin_unlock_irqrestore(&dev->event_lock, flags);
radeon_fence_unref(&fence);
kfree(work);
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 1d33060..73dfbe8 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -113,7 +113,7 @@
int radeon_testing = 0;
int radeon_connector_table = 0;
int radeon_tv = 1;
-int radeon_audio = 1;
+int radeon_audio = 0;
int radeon_disp_priority = 0;
int radeon_hw_i2c = 0;
int radeon_pcie_gen2 = 0;
@@ -151,7 +151,7 @@
MODULE_PARM_DESC(tv, "TV enable (0 = disable)");
module_param_named(tv, radeon_tv, int, 0444);
-MODULE_PARM_DESC(audio, "Audio enable (0 = disable)");
+MODULE_PARM_DESC(audio, "Audio enable (1 = enable)");
module_param_named(audio, radeon_audio, int, 0444);
MODULE_PARM_DESC(disp_priority, "Display Priority (0 = auto, 1 = normal, 2 = high)");
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 1b55755..b293487 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -367,7 +367,8 @@
}
if (ASIC_IS_DCE3(rdev) &&
- (radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT))) {
+ ((radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) ||
+ radeon_encoder_is_dp_bridge(encoder))) {
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
radeon_dp_set_link_config(connector, mode);
}
@@ -660,21 +661,16 @@
if (radeon_encoder_is_dp_bridge(encoder))
return ATOM_ENCODER_MODE_DP;
+ /* DVO is always DVO */
+ if (radeon_encoder->encoder_id == ATOM_ENCODER_MODE_DVO)
+ return ATOM_ENCODER_MODE_DVO;
+
connector = radeon_get_connector_for_encoder(encoder);
- if (!connector) {
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
- return ATOM_ENCODER_MODE_DVI;
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
- default:
- return ATOM_ENCODER_MODE_CRT;
- }
- }
+ /* if we don't have an active device yet, just use one of
+ * the connectors tied to the encoder.
+ */
+ if (!connector)
+ connector = radeon_get_connector_for_encoder_init(encoder);
radeon_connector = to_radeon_connector(connector);
switch (connector->connector_type) {
@@ -954,10 +950,15 @@
int dp_lane_count = 0;
int connector_object_id = 0;
int igp_lane_info = 0;
+ int dig_encoder = dig->dig_encoder;
- if (action == ATOM_TRANSMITTER_ACTION_INIT)
+ if (action == ATOM_TRANSMITTER_ACTION_INIT) {
connector = radeon_get_connector_for_encoder_init(encoder);
- else
+ /* just needed to avoid bailing in the encoder check. the encoder
+ * isn't used for init
+ */
+ dig_encoder = 0;
+ } else
connector = radeon_get_connector_for_encoder(encoder);
if (connector) {
@@ -973,7 +974,7 @@
}
/* no dig encoder assigned */
- if (dig->dig_encoder == -1)
+ if (dig_encoder == -1)
return;
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP)
@@ -1023,7 +1024,7 @@
if (dig->linkb)
args.v3.acConfig.ucLinkSel = 1;
- if (dig->dig_encoder & 1)
+ if (dig_encoder & 1)
args.v3.acConfig.ucEncoderSel = 1;
/* Select the PLL for the PHY
@@ -1073,7 +1074,7 @@
args.v3.acConfig.fDualLinkConnector = 1;
}
} else if (ASIC_IS_DCE32(rdev)) {
- args.v2.acConfig.ucEncoderSel = dig->dig_encoder;
+ args.v2.acConfig.ucEncoderSel = dig_encoder;
if (dig->linkb)
args.v2.acConfig.ucLinkSel = 1;
@@ -1089,9 +1090,10 @@
break;
}
- if (is_dp)
+ if (is_dp) {
args.v2.acConfig.fCoherentMode = 1;
- else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
+ args.v2.acConfig.fDPConnector = 1;
+ } else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
if (dig->coherent_mode)
args.v2.acConfig.fCoherentMode = 1;
if (radeon_encoder->pixel_clock > 165000)
@@ -1100,7 +1102,7 @@
} else {
args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL;
- if (dig->dig_encoder)
+ if (dig_encoder)
args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER;
else
args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER;
@@ -1430,7 +1432,11 @@
if (is_dig) {
switch (mode) {
case DRM_MODE_DPMS_ON:
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
+ /* some early dce3.2 boards have a bug in their transmitter control table */
+ if ((rdev->family == CHIP_RV710) || (rdev->family == CHIP_RV730))
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE, 0, 0);
+ else
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
@@ -1521,26 +1527,29 @@
}
if (ext_encoder) {
- int action;
-
switch (mode) {
case DRM_MODE_DPMS_ON:
default:
- if (ASIC_IS_DCE41(rdev))
- action = EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT;
- else
- action = ATOM_ENABLE;
+ if (ASIC_IS_DCE41(rdev)) {
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT);
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF);
+ } else
+ atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
break;
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
- if (ASIC_IS_DCE41(rdev))
- action = EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT;
- else
- action = ATOM_DISABLE;
+ if (ASIC_IS_DCE41(rdev)) {
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING);
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT);
+ } else
+ atombios_external_encoder_setup(encoder, ext_encoder, ATOM_DISABLE);
break;
}
- atombios_external_encoder_setup(encoder, ext_encoder, action);
}
radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
@@ -1999,6 +2008,65 @@
return connector_status_disconnected;
}
+static enum drm_connector_status
+radeon_atom_dig_detect(struct drm_encoder *encoder, struct drm_connector *connector)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
+ u32 bios_0_scratch;
+
+ if (!ASIC_IS_DCE4(rdev))
+ return connector_status_unknown;
+
+ if (!ext_encoder)
+ return connector_status_unknown;
+
+ if ((radeon_connector->devices & ATOM_DEVICE_CRT_SUPPORT) == 0)
+ return connector_status_unknown;
+
+ /* load detect on the dp bridge */
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION);
+
+ bios_0_scratch = RREG32(R600_BIOS_0_SCRATCH);
+
+ DRM_DEBUG_KMS("Bios 0 scratch %x %08x\n", bios_0_scratch, radeon_encoder->devices);
+ if (radeon_connector->devices & ATOM_DEVICE_CRT1_SUPPORT) {
+ if (bios_0_scratch & ATOM_S0_CRT1_MASK)
+ return connector_status_connected;
+ }
+ if (radeon_connector->devices & ATOM_DEVICE_CRT2_SUPPORT) {
+ if (bios_0_scratch & ATOM_S0_CRT2_MASK)
+ return connector_status_connected;
+ }
+ if (radeon_connector->devices & ATOM_DEVICE_CV_SUPPORT) {
+ if (bios_0_scratch & (ATOM_S0_CV_MASK|ATOM_S0_CV_MASK_A))
+ return connector_status_connected;
+ }
+ if (radeon_connector->devices & ATOM_DEVICE_TV1_SUPPORT) {
+ if (bios_0_scratch & (ATOM_S0_TV1_COMPOSITE | ATOM_S0_TV1_COMPOSITE_A))
+ return connector_status_connected; /* CTV */
+ else if (bios_0_scratch & (ATOM_S0_TV1_SVIDEO | ATOM_S0_TV1_SVIDEO_A))
+ return connector_status_connected; /* STV */
+ }
+ return connector_status_disconnected;
+}
+
+void
+radeon_atom_ext_encoder_setup_ddc(struct drm_encoder *encoder)
+{
+ struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
+
+ if (ext_encoder)
+ /* ddc_setup on the dp bridge */
+ atombios_external_encoder_setup(encoder, ext_encoder,
+ EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP);
+
+}
+
static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
{
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
@@ -2162,7 +2230,7 @@
.mode_set = radeon_atom_encoder_mode_set,
.commit = radeon_atom_encoder_commit,
.disable = radeon_atom_encoder_disable,
- /* no detect for TMDS/LVDS yet */
+ .detect = radeon_atom_dig_detect,
};
static const struct drm_encoder_helper_funcs radeon_atom_dac_helper_funcs = {
diff --git a/drivers/gpu/drm/radeon/radeon_family.h b/drivers/gpu/drm/radeon/radeon_family.h
index 6f1d9e5..ec2f1ea 100644
--- a/drivers/gpu/drm/radeon/radeon_family.h
+++ b/drivers/gpu/drm/radeon/radeon_family.h
@@ -81,6 +81,8 @@
CHIP_CYPRESS,
CHIP_HEMLOCK,
CHIP_PALM,
+ CHIP_SUMO,
+ CHIP_SUMO2,
CHIP_BARTS,
CHIP_TURKS,
CHIP_CAICOS,
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 1f82294..021d2b6 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -40,6 +40,35 @@
#include "radeon.h"
#include "radeon_trace.h"
+static void radeon_fence_write(struct radeon_device *rdev, u32 seq)
+{
+ if (rdev->wb.enabled) {
+ u32 scratch_index;
+ if (rdev->wb.use_event)
+ scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
+ else
+ scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
+ rdev->wb.wb[scratch_index/4] = cpu_to_le32(seq);;
+ } else
+ WREG32(rdev->fence_drv.scratch_reg, seq);
+}
+
+static u32 radeon_fence_read(struct radeon_device *rdev)
+{
+ u32 seq;
+
+ if (rdev->wb.enabled) {
+ u32 scratch_index;
+ if (rdev->wb.use_event)
+ scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
+ else
+ scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
+ seq = le32_to_cpu(rdev->wb.wb[scratch_index/4]);
+ } else
+ seq = RREG32(rdev->fence_drv.scratch_reg);
+ return seq;
+}
+
int radeon_fence_emit(struct radeon_device *rdev, struct radeon_fence *fence)
{
unsigned long irq_flags;
@@ -50,12 +79,12 @@
return 0;
}
fence->seq = atomic_add_return(1, &rdev->fence_drv.seq);
- if (!rdev->cp.ready) {
+ if (!rdev->cp.ready)
/* FIXME: cp is not running assume everythings is done right
* away
*/
- WREG32(rdev->fence_drv.scratch_reg, fence->seq);
- } else
+ radeon_fence_write(rdev, fence->seq);
+ else
radeon_fence_ring_emit(rdev, fence);
trace_radeon_fence_emit(rdev->ddev, fence->seq);
@@ -73,15 +102,7 @@
bool wake = false;
unsigned long cjiffies;
- if (rdev->wb.enabled) {
- u32 scratch_index;
- if (rdev->wb.use_event)
- scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
- else
- scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
- seq = le32_to_cpu(rdev->wb.wb[scratch_index/4]);
- } else
- seq = RREG32(rdev->fence_drv.scratch_reg);
+ seq = radeon_fence_read(rdev);
if (seq != rdev->fence_drv.last_seq) {
rdev->fence_drv.last_seq = seq;
rdev->fence_drv.last_jiffies = jiffies;
@@ -251,7 +272,7 @@
r = radeon_gpu_reset(rdev);
if (r)
return r;
- WREG32(rdev->fence_drv.scratch_reg, fence->seq);
+ radeon_fence_write(rdev, fence->seq);
rdev->gpu_lockup = false;
}
timeout = RADEON_FENCE_JIFFIES_TIMEOUT;
@@ -351,7 +372,7 @@
write_unlock_irqrestore(&rdev->fence_drv.lock, irq_flags);
return r;
}
- WREG32(rdev->fence_drv.scratch_reg, 0);
+ radeon_fence_write(rdev, 0);
atomic_set(&rdev->fence_drv.seq, 0);
INIT_LIST_HEAD(&rdev->fence_drv.created);
INIT_LIST_HEAD(&rdev->fence_drv.emited);
@@ -391,7 +412,7 @@
struct radeon_fence *fence;
seq_printf(m, "Last signaled fence 0x%08X\n",
- RREG32(rdev->fence_drv.scratch_reg));
+ radeon_fence_read(rdev));
if (!list_empty(&rdev->fence_drv.emited)) {
fence = list_entry(rdev->fence_drv.emited.prev,
struct radeon_fence, list);
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 977a341..6df4e3c 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -483,6 +483,8 @@
extern void atombios_dig_transmitter_setup(struct drm_encoder *encoder,
int action, uint8_t lane_num,
uint8_t lane_set);
+extern void radeon_atom_ext_encoder_setup_ddc(struct drm_encoder *encoder);
+extern struct drm_encoder *radeon_atom_get_external_encoder(struct drm_encoder *encoder);
extern int radeon_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
u8 write_byte, u8 *read_byte);
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 86eda1e..aaa19dc 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -487,6 +487,7 @@
case THERMAL_TYPE_RV6XX:
case THERMAL_TYPE_RV770:
case THERMAL_TYPE_EVERGREEN:
+ case THERMAL_TYPE_NI:
case THERMAL_TYPE_SUMO:
rdev->pm.int_hwmon_dev = hwmon_device_register(rdev->dev);
if (IS_ERR(rdev->pm.int_hwmon_dev)) {
diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h
index ec93a75..bc44a3d 100644
--- a/drivers/gpu/drm/radeon/radeon_reg.h
+++ b/drivers/gpu/drm/radeon/radeon_reg.h
@@ -300,6 +300,8 @@
# define RADEON_BUS_READ_BURST (1 << 30)
#define RADEON_BUS_CNTL1 0x0034
# define RADEON_BUS_WAIT_ON_LOCK_EN (1 << 4)
+#define RV370_BUS_CNTL 0x004c
+# define RV370_BUS_BIOS_DIS_ROM (1 << 2)
/* rv370/rv380, rv410, r423/r430/r480, r5xx */
#define RADEON_MSI_REARM_EN 0x0160
# define RV370_MSI_REARM_EN (1 << 0)
diff --git a/drivers/gpu/drm/radeon/reg_srcs/r600 b/drivers/gpu/drm/radeon/reg_srcs/r600
index 92f1900..ea49752 100644
--- a/drivers/gpu/drm/radeon/reg_srcs/r600
+++ b/drivers/gpu/drm/radeon/reg_srcs/r600
@@ -758,6 +758,5 @@
0x00009714 VC_ENHANCE
0x00009830 DB_DEBUG
0x00009838 DB_WATERMARKS
-0x00028D28 DB_SRESULTS_COMPARE_STATE0
0x00028D44 DB_ALPHA_TO_MASK
0x00009700 VC_CNTL
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 6e3b11e..1f5850e 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -426,7 +426,7 @@
return radeon_gart_table_vram_alloc(rdev);
}
-int rs600_gart_enable(struct radeon_device *rdev)
+static int rs600_gart_enable(struct radeon_device *rdev)
{
u32 tmp;
int r, i;
@@ -440,8 +440,8 @@
return r;
radeon_gart_restore(rdev);
/* Enable bus master */
- tmp = RREG32(R_00004C_BUS_CNTL) & C_00004C_BUS_MASTER_DIS;
- WREG32(R_00004C_BUS_CNTL, tmp);
+ tmp = RREG32(RADEON_BUS_CNTL) & ~RS600_BUS_MASTER_DIS;
+ WREG32(RADEON_BUS_CNTL, tmp);
/* FIXME: setup default page */
WREG32_MC(R_000100_MC_PT0_CNTL,
(S_000100_EFFECTIVE_L2_CACHE_SIZE(6) |
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index ef8a5bab..4de5189 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -105,6 +105,9 @@
struct radeon_voltage *voltage = &ps->clock_info[req_cm_idx].voltage;
if ((voltage->type == VOLTAGE_SW) && voltage->voltage) {
+ /* 0xff01 is a flag rather then an actual voltage */
+ if (voltage->voltage == 0xff01)
+ return;
if (voltage->voltage != rdev->pm.current_vddc) {
radeon_atom_set_voltage(rdev, voltage->voltage, SET_VOLTAGE_TYPE_ASIC_VDDC);
rdev->pm.current_vddc = voltage->voltage;
@@ -572,6 +575,12 @@
else
tcp_chan_steer = 0x00fac688;
+ /* RV770 CE has special chremap setup */
+ if (rdev->pdev->device == 0x944e) {
+ tcp_chan_steer = 0x00b08b08;
+ mc_shared_chremap = 0x00b08b08;
+ }
+
WREG32(TCP_CHAN_STEER, tcp_chan_steer);
WREG32(MC_SHARED_CHREMAP, mc_shared_chremap);
}
@@ -1359,6 +1368,7 @@
r700_cp_fini(rdev);
r600_irq_fini(rdev);
radeon_wb_fini(rdev);
+ radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
rv770_pcie_gart_fini(rdev);
rv770_vram_scratch_fini(rdev);
diff --git a/drivers/gpu/drm/savage/savage_bci.c b/drivers/gpu/drm/savage/savage_bci.c
index bf5f83e..cb1ee4e 100644
--- a/drivers/gpu/drm/savage/savage_bci.c
+++ b/drivers/gpu/drm/savage/savage_bci.c
@@ -647,9 +647,6 @@
ret = drm_addmap(dev, aperture_base, SAVAGE_APERTURE_SIZE,
_DRM_FRAME_BUFFER, _DRM_WRITE_COMBINING,
&dev_priv->aperture);
- if (ret)
- return ret;
-
return ret;
}
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 90e23e0..58c271e 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -31,6 +31,7 @@
#include <linux/sched.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
+#include <linux/shmem_fs.h>
#include <linux/file.h>
#include <linux/swap.h>
#include <linux/slab.h>
@@ -484,7 +485,7 @@
swap_space = swap_storage->f_path.dentry->d_inode->i_mapping;
for (i = 0; i < ttm->num_pages; ++i) {
- from_page = read_mapping_page(swap_space, i, NULL);
+ from_page = shmem_read_mapping_page(swap_space, i);
if (IS_ERR(from_page)) {
ret = PTR_ERR(from_page);
goto out_err;
@@ -557,7 +558,7 @@
from_page = ttm->pages[i];
if (unlikely(from_page == NULL))
continue;
- to_page = read_mapping_page(swap_space, i, NULL);
+ to_page = shmem_read_mapping_page(swap_space, i);
if (unlikely(IS_ERR(to_page))) {
ret = PTR_ERR(to_page);
goto out_err;
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 67d2a75..36ca465 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -305,6 +305,7 @@
- 3M PCT touch screens
- ActionStar dual touch panels
- Cando dual touch panels
+ - Chunghwa panels
- CVTouch panels
- Cypress TrueTouch panels
- Elo TouchSystems IntelliTouch Plus panels
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index c957c4b..6f3289a 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1359,6 +1359,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
@@ -1422,6 +1423,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH_DUAL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 0b374a6..a756ee6 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -173,6 +173,9 @@
#define USB_DEVICE_ID_CHICONY_MULTI_TOUCH 0xb19d
#define USB_DEVICE_ID_CHICONY_WIRELESS 0x0618
+#define USB_VENDOR_ID_CHUNGHWAT 0x2247
+#define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH 0x0001
+
#define USB_VENDOR_ID_CIDC 0x1677
#define USB_VENDOR_ID_CMEDIA 0x0d8c
@@ -446,6 +449,7 @@
#define USB_VENDOR_ID_LUMIO 0x202e
#define USB_DEVICE_ID_CRYSTALTOUCH 0x0006
+#define USB_DEVICE_ID_CRYSTALTOUCH_DUAL 0x0007
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
@@ -622,6 +626,7 @@
#define USB_VENDOR_ID_UCLOGIC 0x5543
#define USB_DEVICE_ID_UCLOGIC_TABLET_PF1209 0x0042
#define USB_DEVICE_ID_UCLOGIC_TABLET_KNA5 0x6001
+#define USB_DEVICE_ID_UCLOGIC_TABLET_TWA60 0x0064
#define USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U 0x0003
#define USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U 0x0004
#define USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U 0x0005
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index a5eda4c..0ec91c1 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -501,17 +501,9 @@
}
report->size = 6;
- /*
- * The device reponds with 'invalid report id' when feature
- * report switching it into multitouch mode is sent to it.
- *
- * This results in -EIO from the _raw low-level transport callback,
- * but there seems to be no other way of switching the mode.
- * Thus the super-ugly hacky success check below.
- */
ret = hdev->hid_output_raw_report(hdev, feature, sizeof(feature),
HID_FEATURE_REPORT);
- if (ret != -EIO) {
+ if (ret != sizeof(feature)) {
hid_err(hdev, "unable to request touch data (%d)\n", ret);
goto err_stop_hw;
}
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index ecd4d2d..62cac4d 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -64,6 +64,7 @@
struct mt_class *mtclass; /* our mt device class */
unsigned last_field_index; /* last field index of the report */
unsigned last_slot_field; /* the last field of a slot */
+ int last_mt_collection; /* last known mt-related collection */
__s8 inputmode; /* InputMode HID feature, -1 if non-existent */
__u8 num_received; /* how many contacts we received */
__u8 num_expected; /* expected last contact index */
@@ -225,8 +226,10 @@
cls->sn_move);
/* touchscreen emulation */
set_abs(hi->input, ABS_X, field, cls->sn_move);
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_GD_Y:
if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP)
@@ -237,8 +240,10 @@
cls->sn_move);
/* touchscreen emulation */
set_abs(hi->input, ABS_Y, field, cls->sn_move);
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
}
return 0;
@@ -246,31 +251,42 @@
case HID_UP_DIGITIZER:
switch (usage->hid) {
case HID_DG_INRANGE:
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_DG_CONFIDENCE:
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_DG_TIPSWITCH:
hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
input_set_capability(hi->input, EV_KEY, BTN_TOUCH);
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_DG_CONTACTID:
+ if (!td->maxcontacts)
+ td->maxcontacts = MT_DEFAULT_MAXCONTACT;
input_mt_init_slots(hi->input, td->maxcontacts);
td->last_slot_field = usage->hid;
td->last_field_index = field->index;
+ td->last_mt_collection = usage->collection_index;
return 1;
case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TOUCH_MAJOR);
set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field,
cls->sn_width);
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_DG_HEIGHT:
hid_map_usage(hi, usage, bit, max,
@@ -279,8 +295,10 @@
cls->sn_height);
input_set_abs_params(hi->input,
ABS_MT_ORIENTATION, 0, 1, 0, 0);
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_DG_TIPPRESSURE:
if (quirks & MT_QUIRK_EGALAX_XYZ_FIXUP)
@@ -292,16 +310,20 @@
/* touchscreen emulation */
set_abs(hi->input, ABS_PRESSURE, field,
cls->sn_pressure);
- td->last_slot_field = usage->hid;
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index) {
+ td->last_slot_field = usage->hid;
+ td->last_field_index = field->index;
+ }
return 1;
case HID_DG_CONTACTCOUNT:
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index)
+ td->last_field_index = field->index;
return 1;
case HID_DG_CONTACTMAX:
/* we don't set td->last_slot_field as contactcount and
* contact max are global to the report */
- td->last_field_index = field->index;
+ if (td->last_mt_collection == usage->collection_index)
+ td->last_field_index = field->index;
return -1;
}
/* let hid-input decide for the others */
@@ -516,6 +538,7 @@
}
td->mtclass = mtclass;
td->inputmode = -1;
+ td->last_mt_collection = -1;
hid_set_drvdata(hdev, td);
ret = hid_parse(hdev);
@@ -526,9 +549,6 @@
if (ret)
goto fail;
- if (!td->maxcontacts)
- td->maxcontacts = MT_DEFAULT_MAXCONTACT;
-
td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot),
GFP_KERNEL);
if (!td->slots) {
@@ -593,6 +613,11 @@
HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
USB_DEVICE_ID_CANDO_MULTI_TOUCH_15_6) },
+ /* Chunghwa Telecom touch panels */
+ { .driver_data = MT_CLS_DEFAULT,
+ HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT,
+ USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) },
+
/* CVTouch panels */
{ .driver_data = MT_CLS_DEFAULT,
HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH,
@@ -651,6 +676,9 @@
{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
HID_USB_DEVICE(USB_VENDOR_ID_LUMIO,
USB_DEVICE_ID_CRYSTALTOUCH) },
+ { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
+ HID_USB_DEVICE(USB_VENDOR_ID_LUMIO,
+ USB_DEVICE_ID_CRYSTALTOUCH_DUAL) },
/* MosArt panels */
{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
@@ -681,10 +709,10 @@
HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
USB_DEVICE_ID_MTP)},
{ .driver_data = MT_CLS_CONFIDENCE,
- HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
+ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM,
USB_DEVICE_ID_MTP_STM)},
{ .driver_data = MT_CLS_CONFIDENCE,
- HID_USB_DEVICE(USB_VENDOR_ID_STANTUM,
+ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX,
USB_DEVICE_ID_MTP_SITRONIX)},
/* Touch International panels */
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 0e30b14..621959d 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -74,6 +74,7 @@
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5, HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWA60, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH, HID_QUIRK_MULTI_INPUT },
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index ff3c644..7c1188b 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -248,12 +248,15 @@
usbhid_close(list->hiddev->hid);
usbhid_put_power(list->hiddev->hid);
} else {
+ mutex_unlock(&list->hiddev->existancelock);
kfree(list->hiddev);
+ kfree(list);
+ return 0;
}
}
- kfree(list);
mutex_unlock(&list->hiddev->existancelock);
+ kfree(list);
return 0;
}
@@ -923,10 +926,11 @@
usb_deregister_dev(usbhid->intf, &hiddev_class);
if (hiddev->open) {
+ mutex_unlock(&hiddev->existancelock);
usbhid_close(hiddev->hid);
wake_up_interruptible(&hiddev->wait);
} else {
+ mutex_unlock(&hiddev->existancelock);
kfree(hiddev);
}
- mutex_unlock(&hiddev->existancelock);
}
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 16db83c..5f888f7 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -333,7 +333,7 @@
F71858FG
F71862FG
F71863FG
- F71869F/E
+ F71869F/E/A
F71882FG
F71883FG
F71889FG/ED/A
diff --git a/drivers/hwmon/adm1275.c b/drivers/hwmon/adm1275.c
index c2ee204..8bc1bd6 100644
--- a/drivers/hwmon/adm1275.c
+++ b/drivers/hwmon/adm1275.c
@@ -32,6 +32,7 @@
const struct i2c_device_id *id)
{
int config;
+ int ret;
struct pmbus_driver_info *info;
if (!i2c_check_functionality(client->adapter,
@@ -43,30 +44,32 @@
return -ENOMEM;
config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
- if (config < 0)
- return config;
+ if (config < 0) {
+ ret = config;
+ goto err_mem;
+ }
info->pages = 1;
info->direct[PSC_VOLTAGE_IN] = true;
info->direct[PSC_VOLTAGE_OUT] = true;
info->direct[PSC_CURRENT_OUT] = true;
- info->m[PSC_CURRENT_OUT] = 800;
+ info->m[PSC_CURRENT_OUT] = 807;
info->b[PSC_CURRENT_OUT] = 20475;
info->R[PSC_CURRENT_OUT] = -1;
info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
if (config & ADM1275_VRANGE) {
- info->m[PSC_VOLTAGE_IN] = 19045;
+ info->m[PSC_VOLTAGE_IN] = 19199;
info->b[PSC_VOLTAGE_IN] = 0;
info->R[PSC_VOLTAGE_IN] = -2;
- info->m[PSC_VOLTAGE_OUT] = 19045;
+ info->m[PSC_VOLTAGE_OUT] = 19199;
info->b[PSC_VOLTAGE_OUT] = 0;
info->R[PSC_VOLTAGE_OUT] = -2;
} else {
- info->m[PSC_VOLTAGE_IN] = 6666;
+ info->m[PSC_VOLTAGE_IN] = 6720;
info->b[PSC_VOLTAGE_IN] = 0;
info->R[PSC_VOLTAGE_IN] = -1;
- info->m[PSC_VOLTAGE_OUT] = 6666;
+ info->m[PSC_VOLTAGE_OUT] = 6720;
info->b[PSC_VOLTAGE_OUT] = 0;
info->R[PSC_VOLTAGE_OUT] = -1;
}
@@ -76,7 +79,14 @@
else
info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
- return pmbus_do_probe(client, id, info);
+ ret = pmbus_do_probe(client, id, info);
+ if (ret)
+ goto err_mem;
+ return 0;
+
+err_mem:
+ kfree(info);
+ return ret;
}
static int adm1275_remove(struct i2c_client *client)
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index b5e8920..00e9851 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -268,6 +268,7 @@
static void atk_init_attribute(struct device_attribute *attr, char *name,
sysfs_show_func show)
{
+ sysfs_attr_init(&attr->attr);
attr->attr.name = name;
attr->attr.mode = 0444;
attr->show = show;
@@ -673,6 +674,7 @@
else
err = -EIO;
+ ACPI_FREE(ret);
return err;
}
@@ -1188,19 +1190,15 @@
int err;
list_for_each_entry(s, &data->sensor_list, list) {
- sysfs_attr_init(&s->input_attr.attr);
err = device_create_file(data->hwmon_dev, &s->input_attr);
if (err)
return err;
- sysfs_attr_init(&s->label_attr.attr);
err = device_create_file(data->hwmon_dev, &s->label_attr);
if (err)
return err;
- sysfs_attr_init(&s->limit1_attr.attr);
err = device_create_file(data->hwmon_dev, &s->limit1_attr);
if (err)
return err;
- sysfs_attr_init(&s->limit2_attr.attr);
err = device_create_file(data->hwmon_dev, &s->limit2_attr);
if (err)
return err;
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 85e9379..0070d54 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -97,9 +97,7 @@
struct pdev_entry {
struct list_head list;
struct platform_device *pdev;
- unsigned int cpu;
u16 phys_proc_id;
- u16 cpu_core_id;
};
static LIST_HEAD(pdev_list);
@@ -653,9 +651,7 @@
}
pdev_entry->pdev = pdev;
- pdev_entry->cpu = cpu;
pdev_entry->phys_proc_id = TO_PHYS_ID(cpu);
- pdev_entry->cpu_core_id = TO_CORE_ID(cpu);
list_add_tail(&pdev_entry->list, &pdev_list);
mutex_unlock(&pdev_list_mutex);
diff --git a/drivers/hwmon/emc6w201.c b/drivers/hwmon/emc6w201.c
index e0ef323..0064432 100644
--- a/drivers/hwmon/emc6w201.c
+++ b/drivers/hwmon/emc6w201.c
@@ -78,8 +78,9 @@
lsb = i2c_smbus_read_byte_data(client, reg);
msb = i2c_smbus_read_byte_data(client, reg + 1);
- if (lsb < 0 || msb < 0) {
- dev_err(&client->dev, "16-bit read failed at 0x%02x\n", reg);
+ if (unlikely(lsb < 0 || msb < 0)) {
+ dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
+ 16, "read", reg);
return 0xFFFF; /* Arbitrary value */
}
@@ -95,10 +96,39 @@
int err;
err = i2c_smbus_write_byte_data(client, reg, val & 0xff);
- if (!err)
+ if (likely(!err))
err = i2c_smbus_write_byte_data(client, reg + 1, val >> 8);
- if (err < 0)
- dev_err(&client->dev, "16-bit write failed at 0x%02x\n", reg);
+ if (unlikely(err < 0))
+ dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
+ 16, "write", reg);
+
+ return err;
+}
+
+/* Read 8-bit value from register */
+static u8 emc6w201_read8(struct i2c_client *client, u8 reg)
+{
+ int val;
+
+ val = i2c_smbus_read_byte_data(client, reg);
+ if (unlikely(val < 0)) {
+ dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
+ 8, "read", reg);
+ return 0x00; /* Arbitrary value */
+ }
+
+ return val;
+}
+
+/* Write 8-bit value to register */
+static int emc6w201_write8(struct i2c_client *client, u8 reg, u8 val)
+{
+ int err;
+
+ err = i2c_smbus_write_byte_data(client, reg, val);
+ if (unlikely(err < 0))
+ dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n",
+ 8, "write", reg);
return err;
}
@@ -114,25 +144,25 @@
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
for (nr = 0; nr < 6; nr++) {
data->in[input][nr] =
- i2c_smbus_read_byte_data(client,
+ emc6w201_read8(client,
EMC6W201_REG_IN(nr));
data->in[min][nr] =
- i2c_smbus_read_byte_data(client,
+ emc6w201_read8(client,
EMC6W201_REG_IN_LOW(nr));
data->in[max][nr] =
- i2c_smbus_read_byte_data(client,
+ emc6w201_read8(client,
EMC6W201_REG_IN_HIGH(nr));
}
for (nr = 0; nr < 6; nr++) {
data->temp[input][nr] =
- i2c_smbus_read_byte_data(client,
+ emc6w201_read8(client,
EMC6W201_REG_TEMP(nr));
data->temp[min][nr] =
- i2c_smbus_read_byte_data(client,
+ emc6w201_read8(client,
EMC6W201_REG_TEMP_LOW(nr));
data->temp[max][nr] =
- i2c_smbus_read_byte_data(client,
+ emc6w201_read8(client,
EMC6W201_REG_TEMP_HIGH(nr));
}
@@ -192,7 +222,7 @@
mutex_lock(&data->update_lock);
data->in[sf][nr] = SENSORS_LIMIT(val, 0, 255);
- err = i2c_smbus_write_byte_data(client, reg, data->in[sf][nr]);
+ err = emc6w201_write8(client, reg, data->in[sf][nr]);
mutex_unlock(&data->update_lock);
return err < 0 ? err : count;
@@ -229,7 +259,7 @@
mutex_lock(&data->update_lock);
data->temp[sf][nr] = SENSORS_LIMIT(val, -127, 128);
- err = i2c_smbus_write_byte_data(client, reg, data->temp[sf][nr]);
+ err = emc6w201_write8(client, reg, data->temp[sf][nr]);
mutex_unlock(&data->update_lock);
return err < 0 ? err : count;
@@ -444,7 +474,7 @@
/* Check configuration */
config = i2c_smbus_read_byte_data(client, EMC6W201_REG_CONFIG);
- if ((config & 0xF4) != 0x04)
+ if (config < 0 || (config & 0xF4) != 0x04)
return -ENODEV;
if (!(config & 0x01)) {
dev_err(&client->dev, "Monitoring not enabled\n");
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index a4a94a0..2d96ed2 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -52,6 +52,7 @@
#define SIO_F71858_ID 0x0507 /* Chipset ID */
#define SIO_F71862_ID 0x0601 /* Chipset ID */
#define SIO_F71869_ID 0x0814 /* Chipset ID */
+#define SIO_F71869A_ID 0x1007 /* Chipset ID */
#define SIO_F71882_ID 0x0541 /* Chipset ID */
#define SIO_F71889_ID 0x0723 /* Chipset ID */
#define SIO_F71889E_ID 0x0909 /* Chipset ID */
@@ -108,8 +109,8 @@
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
-enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71882fg, f71889fg,
- f71889ed, f71889a, f8000, f81865f };
+enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71869a, f71882fg,
+ f71889fg, f71889ed, f71889a, f8000, f81865f };
static const char *f71882fg_names[] = {
"f71808e",
@@ -117,6 +118,7 @@
"f71858fg",
"f71862fg",
"f71869", /* Both f71869f and f71869e, reg. compatible and same id */
+ "f71869a",
"f71882fg",
"f71889fg", /* f81801u too, same id */
"f71889ed",
@@ -131,6 +133,7 @@
[f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
[f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
+ [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
@@ -145,6 +148,7 @@
[f71858fg] = 0,
[f71862fg] = 0,
[f71869] = 0,
+ [f71869a] = 0,
[f71882fg] = 1,
[f71889fg] = 1,
[f71889ed] = 1,
@@ -159,6 +163,7 @@
[f71858fg] = 0,
[f71862fg] = 1,
[f71869] = 1,
+ [f71869a] = 1,
[f71882fg] = 1,
[f71889fg] = 1,
[f71889ed] = 1,
@@ -173,6 +178,7 @@
[f71858fg] = 3,
[f71862fg] = 3,
[f71869] = 3,
+ [f71869a] = 3,
[f71882fg] = 4,
[f71889fg] = 3,
[f71889ed] = 3,
@@ -187,6 +193,7 @@
[f71858fg] = 0,
[f71862fg] = 1,
[f71869] = 1,
+ [f71869a] = 1,
[f71882fg] = 1,
[f71889fg] = 1,
[f71889ed] = 1,
@@ -201,6 +208,7 @@
[f71858fg] = 3,
[f71862fg] = 3,
[f71869] = 3,
+ [f71869a] = 3,
[f71882fg] = 3,
[f71889fg] = 3,
[f71889ed] = 3,
@@ -2243,6 +2251,7 @@
case f71808e:
case f71808a:
case f71869:
+ case f71869a:
/* These always have signed auto point temps */
data->auto_point_temp_signed = 1;
/* Fall through to select correct fan/pwm reg bank! */
@@ -2305,6 +2314,7 @@
case f71808e:
case f71808a:
case f71869:
+ case f71869a:
case f71889fg:
case f71889ed:
case f71889a:
@@ -2528,6 +2538,9 @@
case SIO_F71869_ID:
sio_data->type = f71869;
break;
+ case SIO_F71869A_ID:
+ sio_data->type = f71869a;
+ break;
case SIO_F71882_ID:
sio_data->type = f71882fg;
break;
@@ -2662,7 +2675,7 @@
}
MODULE_DESCRIPTION("F71882FG Hardware Monitoring Driver");
-MODULE_AUTHOR("Hans Edgington, Hans de Goede (hdegoede@redhat.com)");
+MODULE_AUTHOR("Hans Edgington, Hans de Goede <hdegoede@redhat.com>");
MODULE_LICENSE("GPL");
module_init(f71882fg_init);
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 2582bfe..c8195a0 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -202,7 +202,7 @@
{X86_VENDOR_CENTAUR, 0x6, 0x7, ANY, 85}, /* Eden ESP/Ezra */
{X86_VENDOR_CENTAUR, 0x6, 0x8, 0x7, 85}, /* Ezra T */
- {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nemiah */
+ {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nehemiah */
{X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17}, /* C3-M, Eden-N */
{X86_VENDOR_CENTAUR, 0x6, 0xA, 0x7, 0}, /* No information */
{X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13}, /* C7, Esther */
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index 537409d..1a409c5 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -947,6 +947,7 @@
/* Set up read-only sensors */
while (ro->label) {
+ sysfs_attr_init(&sensors->dev_attr.attr);
sensors->dev_attr.attr.name = ro->label;
sensors->dev_attr.attr.mode = S_IRUGO;
sensors->dev_attr.show = ro->show;
@@ -963,6 +964,7 @@
/* Set up read-write sensors */
while (rw->label) {
+ sysfs_attr_init(&sensors->dev_attr.attr);
sensors->dev_attr.attr.name = rw->label;
sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR;
sensors->dev_attr.show = rw->show;
diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c
index 06d4eaf..41dbf81 100644
--- a/drivers/hwmon/ibmpex.c
+++ b/drivers/hwmon/ibmpex.c
@@ -358,6 +358,7 @@
else if (type == POWER_SENSOR)
sprintf(n, power_sensor_name_templates[func], "power", counter);
+ sysfs_attr_init(&data->sensors[sensor].attr[func].dev_attr.attr);
data->sensors[sensor].attr[func].dev_attr.attr.name = n;
data->sensors[sensor].attr[func].dev_attr.attr.mode = S_IRUGO;
data->sensors[sensor].attr[func].dev_attr.show = ibmpex_show_sensor;
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index bb6405b..5f52477 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1538,7 +1538,7 @@
};
static const struct attribute_group it87_group_label = {
- .attrs = it87_attributes_vid,
+ .attrs = it87_attributes_label,
};
/* SuperIO detection - will change isa_address if a chip is found */
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index 1a6dfb6..d3b464b 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -98,11 +98,16 @@
};
/* Conversions */
-static int TempFromReg(u8 val_h, u8 val_l)
+static int temp_from_reg_signed(u8 val_h, u8 val_l)
{
- if (val_h & 0x80)
- return val_h - 0x100;
- return val_h * 1000 + val_l * 1000 / 256;
+ s16 val_hl = (val_h << 8) | val_l;
+ return val_hl * 1000 / 256;
+}
+
+static int temp_from_reg_unsigned(u8 val_h, u8 val_l)
+{
+ u16 val_hl = (val_h << 8) | val_l;
+ return val_hl * 1000 / 256;
}
static struct lm95241_data *lm95241_update_device(struct device *dev)
@@ -135,10 +140,13 @@
char *buf)
{
struct lm95241_data *data = lm95241_update_device(dev);
+ int index = to_sensor_dev_attr(attr)->index;
return snprintf(buf, PAGE_SIZE - 1, "%d\n",
- TempFromReg(data->temp[to_sensor_dev_attr(attr)->index],
- data->temp[to_sensor_dev_attr(attr)->index + 1]));
+ index == 0 || (data->config & (1 << (index / 2))) ?
+ temp_from_reg_signed(data->temp[index], data->temp[index + 1]) :
+ temp_from_reg_unsigned(data->temp[index],
+ data->temp[index + 1]));
}
static ssize_t show_type(struct device *dev, struct device_attribute *attr,
@@ -339,7 +347,7 @@
if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
== MANUFACTURER_ID)
&& (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
- >= DEFAULT_REVISION)) {
+ == DEFAULT_REVISION)) {
name = DEVNAME;
} else {
dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n",
diff --git a/drivers/hwmon/max1111.c b/drivers/hwmon/max1111.c
index 12a54aa..14335bb 100644
--- a/drivers/hwmon/max1111.c
+++ b/drivers/hwmon/max1111.c
@@ -40,6 +40,8 @@
struct spi_transfer xfer[2];
uint8_t *tx_buf;
uint8_t *rx_buf;
+ struct mutex drvdata_lock;
+ /* protect msg, xfer and buffers from multiple access */
};
static int max1111_read(struct device *dev, int channel)
@@ -48,6 +50,9 @@
uint8_t v1, v2;
int err;
+ /* writing to drvdata struct is not thread safe, wait on mutex */
+ mutex_lock(&data->drvdata_lock);
+
data->tx_buf[0] = (channel << MAX1111_CTRL_SEL_SH) |
MAX1111_CTRL_PD0 | MAX1111_CTRL_PD1 |
MAX1111_CTRL_SGL | MAX1111_CTRL_UNI | MAX1111_CTRL_STR;
@@ -55,12 +60,15 @@
err = spi_sync(data->spi, &data->msg);
if (err < 0) {
dev_err(dev, "spi_sync failed with %d\n", err);
+ mutex_unlock(&data->drvdata_lock);
return err;
}
v1 = data->rx_buf[0];
v2 = data->rx_buf[1];
+ mutex_unlock(&data->drvdata_lock);
+
if ((v1 & 0xc0) || (v2 & 0x3f))
return -EINVAL;
@@ -176,6 +184,8 @@
if (err)
goto err_free_data;
+ mutex_init(&data->drvdata_lock);
+
data->spi = spi;
spi_set_drvdata(spi, data);
@@ -213,6 +223,7 @@
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
+ mutex_destroy(&data->drvdata_lock);
kfree(data->rx_buf);
kfree(data->tx_buf);
kfree(data);
diff --git a/drivers/hwmon/pmbus.c b/drivers/hwmon/pmbus.c
index 98e2e28..9b1f0c3 100644
--- a/drivers/hwmon/pmbus.c
+++ b/drivers/hwmon/pmbus.c
@@ -47,22 +47,29 @@
if (info->func[0]
&& pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT))
info->func[0] |= PMBUS_HAVE_STATUS_INPUT;
- if (pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) {
+ if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) &&
+ pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) {
info->func[0] |= PMBUS_HAVE_FAN12;
if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12))
info->func[0] |= PMBUS_HAVE_STATUS_FAN12;
}
- if (pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) {
+ if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_34) &&
+ pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) {
info->func[0] |= PMBUS_HAVE_FAN34;
if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34))
info->func[0] |= PMBUS_HAVE_STATUS_FAN34;
}
- if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) {
+ if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1))
info->func[0] |= PMBUS_HAVE_TEMP;
- if (pmbus_check_byte_register(client, 0,
- PMBUS_STATUS_TEMPERATURE))
+ if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2))
+ info->func[0] |= PMBUS_HAVE_TEMP2;
+ if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3))
+ info->func[0] |= PMBUS_HAVE_TEMP3;
+ if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
+ | PMBUS_HAVE_TEMP3)
+ && pmbus_check_byte_register(client, 0,
+ PMBUS_STATUS_TEMPERATURE))
info->func[0] |= PMBUS_HAVE_STATUS_TEMP;
- }
/* Sensors detected on all pages */
for (page = 0; page < info->pages; page++) {
diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c
index 354770e..8e31a8e 100644
--- a/drivers/hwmon/pmbus_core.c
+++ b/drivers/hwmon/pmbus_core.c
@@ -362,8 +362,8 @@
* Convert linear sensor values to milli- or micro-units
* depending on sensor type.
*/
-static int pmbus_reg2data_linear(struct pmbus_data *data,
- struct pmbus_sensor *sensor)
+static long pmbus_reg2data_linear(struct pmbus_data *data,
+ struct pmbus_sensor *sensor)
{
s16 exponent;
s32 mantissa;
@@ -397,15 +397,15 @@
else
val >>= -exponent;
- return (int)val;
+ return val;
}
/*
* Convert direct sensor values to milli- or micro-units
* depending on sensor type.
*/
-static int pmbus_reg2data_direct(struct pmbus_data *data,
- struct pmbus_sensor *sensor)
+static long pmbus_reg2data_direct(struct pmbus_data *data,
+ struct pmbus_sensor *sensor)
{
long val = (s16) sensor->data;
long m, b, R;
@@ -440,12 +440,12 @@
R++;
}
- return (int)((val - b) / m);
+ return (val - b) / m;
}
-static int pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
+static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
{
- int val;
+ long val;
if (data->info->direct[sensor->class])
val = pmbus_reg2data_direct(data, sensor);
@@ -619,7 +619,7 @@
if (!s1 && !s2)
*val = !!regval;
else {
- int v1, v2;
+ long v1, v2;
struct pmbus_sensor *sensor1, *sensor2;
sensor1 = &data->sensors[s1];
@@ -661,7 +661,7 @@
if (sensor->data < 0)
return sensor->data;
- return snprintf(buf, PAGE_SIZE, "%d\n", pmbus_reg2data(data, sensor));
+ return snprintf(buf, PAGE_SIZE, "%ld\n", pmbus_reg2data(data, sensor));
}
static ssize_t pmbus_set_sensor(struct device *dev,
@@ -1430,14 +1430,9 @@
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
- /*
- * Bail out if status register or PMBus revision register
- * does not exist.
- */
- if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0
- || i2c_smbus_read_byte_data(client, PMBUS_REVISION) < 0) {
- dev_err(&client->dev,
- "Status or revision register not found\n");
+ /* Bail out if PMBus status register does not exist. */
+ if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0) {
+ dev_err(&client->dev, "PMBus status register not found\n");
ret = -ENODEV;
goto out_data;
}
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
index 92b42db..b39f52e 100644
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -232,6 +232,7 @@
attr = &attrs->in;
attr->index = channel;
+ sysfs_attr_init(&attr->dev_attr.attr);
attr->dev_attr.attr.name = attrs->in_name;
attr->dev_attr.attr.mode = S_IRUGO;
attr->dev_attr.show = s3c_hwmon_ch_show;
@@ -249,6 +250,7 @@
attr = &attrs->label;
attr->index = channel;
+ sysfs_attr_init(&attr->dev_attr.attr);
attr->dev_attr.attr.name = attrs->label_name;
attr->dev_attr.attr.mode = S_IRUGO;
attr->dev_attr.show = s3c_hwmon_label_show;
diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c
index 020c872..3494a4c 100644
--- a/drivers/hwmon/sch5627.c
+++ b/drivers/hwmon/sch5627.c
@@ -887,7 +887,7 @@
}
MODULE_DESCRIPTION("SMSC SCH5627 Hardware Monitoring Driver");
-MODULE_AUTHOR("Hans de Goede (hdegoede@redhat.com)");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_LICENSE("GPL");
module_init(sch5627_init);
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 52b545a..cbc98ae 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -193,7 +193,13 @@
return;
}
if (twi_int_status & MCOMP) {
- if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
+ if ((read_MASTER_CTL(iface) & MEN) == 0 &&
+ (iface->cur_mode == TWI_I2C_MODE_REPEAT ||
+ iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
+ iface->result = -1;
+ write_INT_MASK(iface, 0);
+ write_MASTER_CTL(iface, 0);
+ } else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
if (iface->readNum == 0) {
/* set the read number to 1 and ask for manual
* stop in block combine mode
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 6c00c10..f84a63c 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -248,12 +248,12 @@
return i2c->msg_ptr >= i2c->msg->len;
}
-/* i2s_s3c_irq_nextbyte
+/* i2c_s3c_irq_nextbyte
*
* process an interrupt and work out what to do
*/
-static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
+static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
{
unsigned long tmp;
unsigned char byte;
@@ -264,7 +264,6 @@
case STATE_IDLE:
dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__);
goto out;
- break;
case STATE_STOP:
dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
@@ -444,7 +443,7 @@
/* pretty much this leaves us with the fact that we've
* transmitted or received whatever byte we last sent */
- i2s_s3c_irq_nextbyte(i2c, status);
+ i2c_s3c_irq_nextbyte(i2c, status);
out:
return IRQ_HANDLED;
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index dd39c1e..26c352a 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -234,7 +234,7 @@
if (taos->state != TAOS_STATE_IDLE) {
err = -ENODEV;
- dev_dbg(&serio->dev, "TAOS EVM reset failed (state=%d, "
+ dev_err(&serio->dev, "TAOS EVM reset failed (state=%d, "
"pos=%d)\n", taos->state, taos->pos);
goto exit_close;
}
@@ -255,7 +255,7 @@
msecs_to_jiffies(250));
if (taos->state != TAOS_STATE_IDLE) {
err = -ENODEV;
- dev_err(&adapter->dev, "Echo off failed "
+ dev_err(&serio->dev, "TAOS EVM echo off failed "
"(state=%d)\n", taos->state);
goto exit_close;
}
@@ -263,7 +263,7 @@
err = i2c_add_adapter(adapter);
if (err)
goto exit_close;
- dev_dbg(&serio->dev, "Connected to TAOS EVM\n");
+ dev_info(&serio->dev, "Connected to TAOS EVM\n");
taos->client = taos_instantiate_device(adapter);
return 0;
@@ -288,7 +288,7 @@
serio_set_drvdata(serio, NULL);
kfree(taos);
- dev_dbg(&serio->dev, "Disconnected from TAOS EVM\n");
+ dev_info(&serio->dev, "Disconnected from TAOS EVM\n");
}
static struct serio_device_id taos_serio_ids[] = {
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 4d93196..fb3b4f8 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -40,8 +40,10 @@
#define I2C_CNFG_NEW_MASTER_FSM (1<<11)
#define I2C_STATUS 0x01C
#define I2C_SL_CNFG 0x020
+#define I2C_SL_CNFG_NACK (1<<1)
#define I2C_SL_CNFG_NEWSL (1<<2)
#define I2C_SL_ADDR1 0x02c
+#define I2C_SL_ADDR2 0x030
#define I2C_TX_FIFO 0x050
#define I2C_RX_FIFO 0x054
#define I2C_PACKET_TRANSFER_STATUS 0x058
@@ -337,7 +339,11 @@
if (!i2c_dev->is_dvc) {
u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
- i2c_writel(i2c_dev, sl_cfg | I2C_SL_CNFG_NEWSL, I2C_SL_CNFG);
+ sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL;
+ i2c_writel(i2c_dev, sl_cfg, I2C_SL_CNFG);
+ i2c_writel(i2c_dev, 0xfc, I2C_SL_ADDR1);
+ i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2);
+
}
val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |
diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c
index 54e1ce7..6f89536 100644
--- a/drivers/i2c/muxes/pca954x.c
+++ b/drivers/i2c/muxes/pca954x.c
@@ -201,10 +201,11 @@
i2c_set_clientdata(client, data);
- /* Read the mux register at addr to verify
- * that the mux is in fact present.
+ /* Write the mux register at addr to verify
+ * that the mux is in fact present. This also
+ * initializes the mux to disconnected state.
*/
- if (i2c_smbus_read_byte(client) < 0) {
+ if (i2c_smbus_write_byte(client, 0) < 0) {
dev_warn(&client->dev, "probe failed\n");
goto exit_free;
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 144d272..04b0956 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -778,7 +778,8 @@
sector_t block)
{
struct ide_cmd cmd;
- int uptodate = 0, nsectors;
+ int uptodate = 0;
+ unsigned int nsectors;
ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, block: %llu",
rq->cmd[0], (unsigned long long)block);
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index f62f52f..fc0f2bd 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -3641,7 +3641,8 @@
static char *cm_devnode(struct device *dev, mode_t *mode)
{
- *mode = 0666;
+ if (mode)
+ *mode = 0666;
return kasprintf(GFP_KERNEL, "infiniband/%s", dev_name(dev));
}
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index e49a85f..56898b6 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -826,7 +826,8 @@
static char *uverbs_devnode(struct device *dev, mode_t *mode)
{
- *mode = 0666;
+ if (mode)
+ *mode = 0666;
return kasprintf(GFP_KERNEL, "infiniband/%s", dev_name(dev));
}
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index f660cd0..31fb440 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -1463,9 +1463,9 @@
struct c4iw_qp_attributes attrs;
int disconnect = 1;
int release = 0;
- int abort = 0;
struct tid_info *t = dev->rdev.lldi.tids;
unsigned int tid = GET_TID(hdr);
+ int ret;
ep = lookup_tid(t, tid);
PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
@@ -1501,10 +1501,12 @@
start_ep_timer(ep);
__state_set(&ep->com, CLOSING);
attrs.next_state = C4IW_QP_STATE_CLOSING;
- abort = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
+ ret = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
- peer_close_upcall(ep);
- disconnect = 1;
+ if (ret != -ECONNRESET) {
+ peer_close_upcall(ep);
+ disconnect = 1;
+ }
break;
case ABORTING:
disconnect = 0;
@@ -2109,15 +2111,16 @@
break;
}
- mutex_unlock(&ep->com.mutex);
if (close) {
- if (abrupt)
- ret = abort_connection(ep, NULL, gfp);
- else
+ if (abrupt) {
+ close_complete_upcall(ep);
+ ret = send_abort(ep, NULL, gfp);
+ } else
ret = send_halfclose(ep, gfp);
if (ret)
fatal = 1;
}
+ mutex_unlock(&ep->com.mutex);
if (fatal)
release_ep_resources(ep);
return ret;
@@ -2301,6 +2304,31 @@
return 0;
}
+static int peer_abort_intr(struct c4iw_dev *dev, struct sk_buff *skb)
+{
+ struct cpl_abort_req_rss *req = cplhdr(skb);
+ struct c4iw_ep *ep;
+ struct tid_info *t = dev->rdev.lldi.tids;
+ unsigned int tid = GET_TID(req);
+
+ ep = lookup_tid(t, tid);
+ if (is_neg_adv_abort(req->status)) {
+ PDBG("%s neg_adv_abort ep %p tid %u\n", __func__, ep,
+ ep->hwtid);
+ kfree_skb(skb);
+ return 0;
+ }
+ PDBG("%s ep %p tid %u state %u\n", __func__, ep, ep->hwtid,
+ ep->com.state);
+
+ /*
+ * Wake up any threads in rdma_init() or rdma_fini().
+ */
+ c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
+ sched(dev, skb);
+ return 0;
+}
+
/*
* Most upcalls from the T4 Core go to sched() to
* schedule the processing on a work queue.
@@ -2317,7 +2345,7 @@
[CPL_PASS_ESTABLISH] = sched,
[CPL_PEER_CLOSE] = sched,
[CPL_CLOSE_CON_RPL] = sched,
- [CPL_ABORT_REQ_RSS] = sched,
+ [CPL_ABORT_REQ_RSS] = peer_abort_intr,
[CPL_RDMA_TERMINATE] = sched,
[CPL_FW4_ACK] = sched,
[CPL_SET_TCB_RPL] = set_tcb_rpl,
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index 8d8f8ad..1720dc7 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -801,6 +801,10 @@
if (ucontext) {
memsize = roundup(memsize, PAGE_SIZE);
hwentries = memsize / sizeof *chp->cq.queue;
+ while (hwentries > T4_MAX_IQ_SIZE) {
+ memsize -= PAGE_SIZE;
+ hwentries = memsize / sizeof *chp->cq.queue;
+ }
}
chp->cq.size = hwentries;
chp->cq.memsize = memsize;
diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c
index 273ffe4..0347eed 100644
--- a/drivers/infiniband/hw/cxgb4/mem.c
+++ b/drivers/infiniband/hw/cxgb4/mem.c
@@ -625,7 +625,7 @@
mhp->attr.perms = c4iw_ib_to_tpt_access(acc);
mhp->attr.va_fbo = virt;
mhp->attr.page_size = shift - 12;
- mhp->attr.len = (u32) length;
+ mhp->attr.len = length;
err = register_mem(rhp, php, mhp, shift);
if (err)
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index 3b773b0..a41578e 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -1207,11 +1207,8 @@
c4iw_get_ep(&qhp->ep->com);
}
ret = rdma_fini(rhp, qhp, ep);
- if (ret) {
- if (internal)
- c4iw_get_ep(&qhp->ep->com);
+ if (ret)
goto err;
- }
break;
case C4IW_QP_STATE_TERMINATE:
set_state(qhp, C4IW_QP_STATE_TERMINATE);
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 9f53e68..8ec5237 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -469,6 +469,8 @@
#define IB_7322_LT_STATE_RECOVERIDLE 0x0f
#define IB_7322_LT_STATE_CFGENH 0x10
#define IB_7322_LT_STATE_CFGTEST 0x11
+#define IB_7322_LT_STATE_CFGWAITRMTTEST 0x12
+#define IB_7322_LT_STATE_CFGWAITENH 0x13
/* link state machine states from IBC */
#define IB_7322_L_STATE_DOWN 0x0
@@ -498,8 +500,10 @@
IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
[IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH,
[IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN,
- [0x13] = IB_PHYSPORTSTATE_CFG_WAIT_ENH,
+ [IB_7322_LT_STATE_CFGWAITRMTTEST] =
+ IB_PHYSPORTSTATE_CFG_TRAIN,
+ [IB_7322_LT_STATE_CFGWAITENH] =
+ IB_PHYSPORTSTATE_CFG_WAIT_ENH,
[0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
[0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
[0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
@@ -1692,7 +1696,9 @@
break;
}
- if (ibclt == IB_7322_LT_STATE_CFGTEST &&
+ if (((ibclt >= IB_7322_LT_STATE_CFGTEST &&
+ ibclt <= IB_7322_LT_STATE_CFGWAITENH) ||
+ ibclt == IB_7322_LT_STATE_LINKUP) &&
(ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) {
force_h1(ppd);
ppd->cpspec->qdr_reforce = 1;
@@ -7301,12 +7307,17 @@
static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable)
{
u64 data = qib_read_kreg_port(ppd, krp_serdesctrl);
- printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS %s\n",
- ppd->dd->unit, ppd->port, (enable ? "on" : "off"));
- if (enable)
+ u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN);
+
+ if (enable && !state) {
+ printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS on\n",
+ ppd->dd->unit, ppd->port);
data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
- else
+ } else if (!enable && state) {
+ printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS off\n",
+ ppd->dd->unit, ppd->port);
data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN);
+ }
qib_write_kreg_port(ppd, krp_serdesctrl, data);
}
diff --git a/drivers/infiniband/hw/qib/qib_intr.c b/drivers/infiniband/hw/qib/qib_intr.c
index a693c56..6ae57d2 100644
--- a/drivers/infiniband/hw/qib/qib_intr.c
+++ b/drivers/infiniband/hw/qib/qib_intr.c
@@ -96,8 +96,12 @@
* states, or if it transitions from any of the up (INIT or better)
* states into any of the down states (except link recovery), then
* call the chip-specific code to take appropriate actions.
+ *
+ * ppd->lflags could be 0 if this is the first time the interrupt
+ * handlers has been called but the link is already up.
*/
- if (lstate >= IB_PORT_INIT && (ppd->lflags & QIBL_LINKDOWN) &&
+ if (lstate >= IB_PORT_INIT &&
+ (!ppd->lflags || (ppd->lflags & QIBL_LINKDOWN)) &&
ltstate == IB_PHYSPORTSTATE_LINKUP) {
/* transitioned to UP */
if (dd->f_ib_updown(ppd, 1, ibcs))
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index be0921e..4cf2534 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -111,7 +111,8 @@
rcu_read_unlock();
- wake_up_interruptible(&evdev->wait);
+ if (type == EV_SYN && code == SYN_REPORT)
+ wake_up_interruptible(&evdev->wait);
}
static int evdev_fasync(int fd, struct file *file, int on)
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 75e11c7..da38d97 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1756,7 +1756,7 @@
} else if (test_bit(ABS_MT_TRACKING_ID, dev->absbit)) {
mt_slots = dev->absinfo[ABS_MT_TRACKING_ID].maximum -
dev->absinfo[ABS_MT_TRACKING_ID].minimum + 1,
- clamp(mt_slots, 2, 32);
+ mt_slots = clamp(mt_slots, 2, 32);
} else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
mt_slots = 2;
} else {
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index f23a743..33d0bdc 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -209,6 +209,7 @@
#endif
}
}
+ input_sync(omap_kp_data->input);
memcpy(keypad_state, new_state, sizeof(keypad_state));
if (key_down) {
diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
index 40b02ae..6229c3e 100644
--- a/drivers/input/keyboard/pmic8xxx-keypad.c
+++ b/drivers/input/keyboard/pmic8xxx-keypad.c
@@ -520,7 +520,8 @@
*/
static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev)
{
- const struct pm8xxx_keypad_platform_data *pdata = mfd_get_data(pdev);
+ const struct pm8xxx_keypad_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
const struct matrix_keymap_data *keymap_data;
struct pmic8xxx_kp *kp;
int rc;
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index 834cf98..6876700 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -32,7 +32,7 @@
[SH_KEYSC_MODE_3] = { 2, 4, 7 },
[SH_KEYSC_MODE_4] = { 3, 6, 6 },
[SH_KEYSC_MODE_5] = { 4, 6, 7 },
- [SH_KEYSC_MODE_6] = { 5, 7, 7 },
+ [SH_KEYSC_MODE_6] = { 5, 8, 8 },
};
struct sh_keysc_priv {
diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c
index 97e07e7..b3cfb9c 100644
--- a/drivers/input/misc/pmic8xxx-pwrkey.c
+++ b/drivers/input/misc/pmic8xxx-pwrkey.c
@@ -90,7 +90,8 @@
unsigned int delay;
u8 pon_cntl;
struct pmic8xxx_pwrkey *pwrkey;
- const struct pm8xxx_pwrkey_platform_data *pdata = mfd_get_data(pdev);
+ const struct pm8xxx_pwrkey_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
if (!pdata) {
dev_err(&pdev->dev, "power key platform data not supplied\n");
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 257e033..0110b5a 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -187,7 +187,7 @@
if (size == 0)
size = xres ? : 1;
- clamp(value, min, max);
+ value = clamp(value, min, max);
mousedev->packet.x = ((value - min) * xres) / size;
mousedev->packet.abs_event = 1;
@@ -201,7 +201,7 @@
if (size == 0)
size = yres ? : 1;
- clamp(value, min, max);
+ value = clamp(value, min, max);
mousedev->packet.y = yres - ((value - min) * yres) / size;
mousedev->packet.abs_event = 1;
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 59de638..e35058b 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -156,8 +156,10 @@
if (!cs || !try_module_get(cs->driver->owner))
return -ENODEV;
- if (mutex_lock_interruptible(&cs->mutex))
+ if (mutex_lock_interruptible(&cs->mutex)) {
+ module_put(cs->driver->owner);
return -ERESTARTSYS;
+ }
tty->driver_data = cs;
++cs->open_count;
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 3ccbff1..71a8eb6 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -283,6 +283,7 @@
_queue_data(&dch->dev.D, MPH_INFORMATION_IND, MISDN_ID_ANY,
sizeof(struct ph_info_dch) + dch->dev.nrbchan *
sizeof(struct ph_info_ch), phi, GFP_ATOMIC);
+ kfree(phi);
}
/*
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 23f0d5e..713d43b 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -1,3 +1,10 @@
+config LEDS_GPIO_REGISTER
+ bool
+ help
+ This option provides the function gpio_led_register_device.
+ As this function is used by arch code it must not be compiled as a
+ module.
+
menuconfig NEW_LEDS
bool "LED Support"
help
@@ -7,22 +14,14 @@
This is not related to standard keyboard LEDs which are controlled
via the input system.
+if NEW_LEDS
+
config LEDS_CLASS
bool "LED Class Support"
- depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
-config LEDS_GPIO_REGISTER
- bool
- help
- This option provides the function gpio_led_register_device.
- As this function is used by arch code it must not be compiled as a
- module.
-
-if NEW_LEDS
-
comment "LED drivers"
config LEDS_88PM860X
@@ -391,6 +390,7 @@
config LEDS_ASIC3
bool "LED support for the HTC ASIC3"
+ depends on LEDS_CLASS
depends on MFD_ASIC3
default y
help
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index c0cff64..cc1dc48 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -593,7 +593,7 @@
&lp5521_led_attribute_group);
}
-static int __init lp5521_init_led(struct lp5521_led *led,
+static int __devinit lp5521_init_led(struct lp5521_led *led,
struct i2c_client *client,
int chan, struct lp5521_platform_data *pdata)
{
@@ -637,7 +637,7 @@
return 0;
}
-static int lp5521_probe(struct i2c_client *client,
+static int __devinit lp5521_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lp5521_chip *chip;
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index e19fed2..5971e309 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -826,7 +826,7 @@
return 0;
}
-static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev,
+static int __devinit lp5523_init_led(struct lp5523_led *led, struct device *dev,
int chan, struct lp5523_platform_data *pdata)
{
char name[32];
@@ -872,7 +872,7 @@
static struct i2c_driver lp5523_driver;
-static int lp5523_probe(struct i2c_client *client,
+static int __devinit lp5523_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lp5523_chip *chip;
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index d8d3a1e..a2c8746 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -88,7 +88,7 @@
static struct i2c_driver pca9532_driver = {
.driver = {
- .name = "pca953x",
+ .name = "leds-pca953x",
},
.probe = pca9532_probe,
.remove = pca9532_remove,
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 70bd738..574b09a 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -534,6 +534,82 @@
kunmap_atomic(sb, KM_USER0);
}
+/*
+ * bitmap_new_disk_sb
+ * @bitmap
+ *
+ * This function is somewhat the reverse of bitmap_read_sb. bitmap_read_sb
+ * reads and verifies the on-disk bitmap superblock and populates bitmap_info.
+ * This function verifies 'bitmap_info' and populates the on-disk bitmap
+ * structure, which is to be written to disk.
+ *
+ * Returns: 0 on success, -Exxx on error
+ */
+static int bitmap_new_disk_sb(struct bitmap *bitmap)
+{
+ bitmap_super_t *sb;
+ unsigned long chunksize, daemon_sleep, write_behind;
+ int err = -EINVAL;
+
+ bitmap->sb_page = alloc_page(GFP_KERNEL);
+ if (IS_ERR(bitmap->sb_page)) {
+ err = PTR_ERR(bitmap->sb_page);
+ bitmap->sb_page = NULL;
+ return err;
+ }
+ bitmap->sb_page->index = 0;
+
+ sb = kmap_atomic(bitmap->sb_page, KM_USER0);
+
+ sb->magic = cpu_to_le32(BITMAP_MAGIC);
+ sb->version = cpu_to_le32(BITMAP_MAJOR_HI);
+
+ chunksize = bitmap->mddev->bitmap_info.chunksize;
+ BUG_ON(!chunksize);
+ if (!is_power_of_2(chunksize)) {
+ kunmap_atomic(sb, KM_USER0);
+ printk(KERN_ERR "bitmap chunksize not a power of 2\n");
+ return -EINVAL;
+ }
+ sb->chunksize = cpu_to_le32(chunksize);
+
+ daemon_sleep = bitmap->mddev->bitmap_info.daemon_sleep;
+ if (!daemon_sleep ||
+ (daemon_sleep < 1) || (daemon_sleep > MAX_SCHEDULE_TIMEOUT)) {
+ printk(KERN_INFO "Choosing daemon_sleep default (5 sec)\n");
+ daemon_sleep = 5 * HZ;
+ }
+ sb->daemon_sleep = cpu_to_le32(daemon_sleep);
+ bitmap->mddev->bitmap_info.daemon_sleep = daemon_sleep;
+
+ /*
+ * FIXME: write_behind for RAID1. If not specified, what
+ * is a good choice? We choose COUNTER_MAX / 2 arbitrarily.
+ */
+ write_behind = bitmap->mddev->bitmap_info.max_write_behind;
+ if (write_behind > COUNTER_MAX)
+ write_behind = COUNTER_MAX / 2;
+ sb->write_behind = cpu_to_le32(write_behind);
+ bitmap->mddev->bitmap_info.max_write_behind = write_behind;
+
+ /* keep the array size field of the bitmap superblock up to date */
+ sb->sync_size = cpu_to_le64(bitmap->mddev->resync_max_sectors);
+
+ memcpy(sb->uuid, bitmap->mddev->uuid, 16);
+
+ bitmap->flags |= BITMAP_STALE;
+ sb->state |= cpu_to_le32(BITMAP_STALE);
+ bitmap->events_cleared = bitmap->mddev->events;
+ sb->events_cleared = cpu_to_le64(bitmap->mddev->events);
+
+ bitmap->flags |= BITMAP_HOSTENDIAN;
+ sb->version = cpu_to_le32(BITMAP_MAJOR_HOSTENDIAN);
+
+ kunmap_atomic(sb, KM_USER0);
+
+ return 0;
+}
+
/* read the superblock from the bitmap file and initialize some bitmap fields */
static int bitmap_read_sb(struct bitmap *bitmap)
{
@@ -575,7 +651,7 @@
reason = "unrecognized superblock version";
else if (chunksize < 512)
reason = "bitmap chunksize too small";
- else if ((1 << ffz(~chunksize)) != chunksize)
+ else if (!is_power_of_2(chunksize))
reason = "bitmap chunksize not a power of 2";
else if (daemon_sleep < 1 || daemon_sleep > MAX_SCHEDULE_TIMEOUT)
reason = "daemon sleep period out of range";
@@ -1076,8 +1152,8 @@
}
printk(KERN_INFO "%s: bitmap initialized from disk: "
- "read %lu/%lu pages, set %lu bits\n",
- bmname(bitmap), bitmap->file_pages, num_pages, bit_cnt);
+ "read %lu/%lu pages, set %lu of %lu bits\n",
+ bmname(bitmap), bitmap->file_pages, num_pages, bit_cnt, chunks);
return 0;
@@ -1332,7 +1408,7 @@
return 0;
}
- if (unlikely((*bmc & COUNTER_MAX) == COUNTER_MAX)) {
+ if (unlikely(COUNTER(*bmc) == COUNTER_MAX)) {
DEFINE_WAIT(__wait);
/* note that it is safe to do the prepare_to_wait
* after the test as long as we do it before dropping
@@ -1404,10 +1480,10 @@
sysfs_notify_dirent_safe(bitmap->sysfs_can_clear);
}
- if (!success && ! (*bmc & NEEDED_MASK))
+ if (!success && !NEEDED(*bmc))
*bmc |= NEEDED_MASK;
- if ((*bmc & COUNTER_MAX) == COUNTER_MAX)
+ if (COUNTER(*bmc) == COUNTER_MAX)
wake_up(&bitmap->overflow_wait);
(*bmc)--;
@@ -1728,9 +1804,16 @@
vfs_fsync(file, 1);
}
/* read superblock from bitmap file (this sets mddev->bitmap_info.chunksize) */
- if (!mddev->bitmap_info.external)
- err = bitmap_read_sb(bitmap);
- else {
+ if (!mddev->bitmap_info.external) {
+ /*
+ * If 'MD_ARRAY_FIRST_USE' is set, then device-mapper is
+ * instructing us to create a new on-disk bitmap instance.
+ */
+ if (test_and_clear_bit(MD_ARRAY_FIRST_USE, &mddev->flags))
+ err = bitmap_new_disk_sb(bitmap);
+ else
+ err = bitmap_read_sb(bitmap);
+ } else {
err = 0;
if (mddev->bitmap_info.chunksize == 0 ||
mddev->bitmap_info.daemon_sleep == 0)
@@ -1754,9 +1837,6 @@
bitmap->chunks = chunks;
bitmap->pages = pages;
bitmap->missing_pages = pages;
- bitmap->counter_bits = COUNTER_BITS;
-
- bitmap->syncchunk = ~0UL;
#ifdef INJECT_FATAL_FAULT_1
bitmap->bp = NULL;
diff --git a/drivers/md/bitmap.h b/drivers/md/bitmap.h
index d0aeaf4..b2a127e 100644
--- a/drivers/md/bitmap.h
+++ b/drivers/md/bitmap.h
@@ -85,7 +85,6 @@
typedef __u16 bitmap_counter_t;
#define COUNTER_BITS 16
#define COUNTER_BIT_SHIFT 4
-#define COUNTER_BYTE_RATIO (COUNTER_BITS / 8)
#define COUNTER_BYTE_SHIFT (COUNTER_BIT_SHIFT - 3)
#define NEEDED_MASK ((bitmap_counter_t) (1 << (COUNTER_BITS - 1)))
@@ -196,19 +195,10 @@
mddev_t *mddev; /* the md device that the bitmap is for */
- int counter_bits; /* how many bits per block counter */
-
/* bitmap chunksize -- how much data does each bit represent? */
unsigned long chunkshift; /* chunksize = 2^chunkshift (for bitops) */
unsigned long chunks; /* total number of data chunks for the array */
- /* We hold a count on the chunk currently being synced, and drop
- * it when the last block is started. If the resync is aborted
- * midway, we need to be able to drop that count, so we remember
- * the counted chunk..
- */
- unsigned long syncchunk;
-
__u64 events_cleared;
int need_sync;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index aa640a8..91e31e2 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -351,6 +351,9 @@
mddev->suspended = 0;
wake_up(&mddev->sb_wait);
mddev->pers->quiesce(mddev, 0);
+
+ md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
}
EXPORT_SYMBOL_GPL(mddev_resume);
@@ -1750,6 +1753,18 @@
},
};
+static void sync_super(mddev_t *mddev, mdk_rdev_t *rdev)
+{
+ if (mddev->sync_super) {
+ mddev->sync_super(mddev, rdev);
+ return;
+ }
+
+ BUG_ON(mddev->major_version >= ARRAY_SIZE(super_types));
+
+ super_types[mddev->major_version].sync_super(mddev, rdev);
+}
+
static int match_mddev_units(mddev_t *mddev1, mddev_t *mddev2)
{
mdk_rdev_t *rdev, *rdev2;
@@ -1781,8 +1796,8 @@
if (list_empty(&mddev->disks))
return 0; /* nothing to do */
- if (blk_get_integrity(mddev->gendisk))
- return 0; /* already registered */
+ if (!mddev->gendisk || blk_get_integrity(mddev->gendisk))
+ return 0; /* shouldn't register, or already is */
list_for_each_entry(rdev, &mddev->disks, same_set) {
/* skip spares and non-functional disks */
if (test_bit(Faulty, &rdev->flags))
@@ -2168,8 +2183,7 @@
/* Don't update this superblock */
rdev->sb_loaded = 2;
} else {
- super_types[mddev->major_version].
- sync_super(mddev, rdev);
+ sync_super(mddev, rdev);
rdev->sb_loaded = 1;
}
}
@@ -2462,7 +2476,7 @@
if (rdev->raid_disk == -1)
return -EEXIST;
/* personality does all needed checks */
- if (rdev->mddev->pers->hot_add_disk == NULL)
+ if (rdev->mddev->pers->hot_remove_disk == NULL)
return -EINVAL;
err = rdev->mddev->pers->
hot_remove_disk(rdev->mddev, rdev->raid_disk);
@@ -4619,9 +4633,6 @@
if (mddev->flags)
md_update_sb(mddev, 0);
- md_wakeup_thread(mddev->thread);
- md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
-
md_new_event(mddev);
sysfs_notify_dirent_safe(mddev->sysfs_state);
sysfs_notify_dirent_safe(mddev->sysfs_action);
@@ -4642,6 +4653,10 @@
bitmap_destroy(mddev);
goto out;
}
+
+ md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->sync_thread); /* possibly kick off a reshape */
+
set_capacity(mddev->gendisk, mddev->array_sectors);
revalidate_disk(mddev->gendisk);
mddev->changed = 1;
@@ -5259,6 +5274,8 @@
if (mddev->degraded)
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+ if (!err)
+ md_new_event(mddev);
md_wakeup_thread(mddev->thread);
return err;
}
@@ -6866,8 +6883,8 @@
* Tune reconstruction:
*/
window = 32*(PAGE_SIZE/512);
- printk(KERN_INFO "md: using %dk window, over a total of %llu blocks.\n",
- window/2,(unsigned long long) max_sectors/2);
+ printk(KERN_INFO "md: using %dk window, over a total of %lluk.\n",
+ window/2, (unsigned long long)max_sectors/2);
atomic_set(&mddev->recovery_active, 0);
last_check = 0;
@@ -7045,7 +7062,6 @@
}
EXPORT_SYMBOL_GPL(md_do_sync);
-
static int remove_and_add_spares(mddev_t *mddev)
{
mdk_rdev_t *rdev;
@@ -7072,6 +7088,7 @@
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (rdev->raid_disk >= 0 &&
!test_bit(In_sync, &rdev->flags) &&
+ !test_bit(Faulty, &rdev->flags) &&
!test_bit(Blocked, &rdev->flags))
spares++;
if (rdev->raid_disk < 0
@@ -7157,6 +7174,9 @@
*/
void md_check_recovery(mddev_t *mddev)
{
+ if (mddev->suspended)
+ return;
+
if (mddev->bitmap)
bitmap_daemon_work(mddev);
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 0b1fd3f..1c26c7a 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -124,6 +124,7 @@
#define MD_CHANGE_DEVS 0 /* Some device status has changed */
#define MD_CHANGE_CLEAN 1 /* transition to or from 'clean' */
#define MD_CHANGE_PENDING 2 /* switch from 'clean' to 'active' in progress */
+#define MD_ARRAY_FIRST_USE 3 /* First use of array, needs initialization */
int suspended;
atomic_t active_io;
@@ -330,6 +331,7 @@
atomic_t flush_pending;
struct work_struct flush_work;
struct work_struct event_work; /* used by dm to report failure event */
+ void (*sync_super)(mddev_t *mddev, mdk_rdev_t *rdev);
};
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 5d09609..f7431b6 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -497,21 +497,19 @@
return best_disk;
}
-static int raid1_congested(void *data, int bits)
+int md_raid1_congested(mddev_t *mddev, int bits)
{
- mddev_t *mddev = data;
conf_t *conf = mddev->private;
int i, ret = 0;
- if (mddev_congested(mddev, bits))
- return 1;
-
rcu_read_lock();
for (i = 0; i < mddev->raid_disks; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
if (rdev && !test_bit(Faulty, &rdev->flags)) {
struct request_queue *q = bdev_get_queue(rdev->bdev);
+ BUG_ON(!q);
+
/* Note the '|| 1' - when read_balance prefers
* non-congested targets, it can be removed
*/
@@ -524,7 +522,15 @@
rcu_read_unlock();
return ret;
}
+EXPORT_SYMBOL_GPL(md_raid1_congested);
+static int raid1_congested(void *data, int bits)
+{
+ mddev_t *mddev = data;
+
+ return mddev_congested(mddev, bits) ||
+ md_raid1_congested(mddev, bits);
+}
static void flush_pending_writes(conf_t *conf)
{
@@ -1972,6 +1978,8 @@
return PTR_ERR(conf);
list_for_each_entry(rdev, &mddev->disks, same_set) {
+ if (!mddev->gendisk)
+ continue;
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
/* as we don't honour merge_bvec_fn, we must never risk
@@ -2013,8 +2021,10 @@
md_set_array_sectors(mddev, raid1_size(mddev, 0, 0));
- mddev->queue->backing_dev_info.congested_fn = raid1_congested;
- mddev->queue->backing_dev_info.congested_data = mddev;
+ if (mddev->queue) {
+ mddev->queue->backing_dev_info.congested_fn = raid1_congested;
+ mddev->queue->backing_dev_info.congested_data = mddev;
+ }
return md_integrity_register(mddev);
}
diff --git a/drivers/md/raid1.h b/drivers/md/raid1.h
index 5fc4ca1..e743a64 100644
--- a/drivers/md/raid1.h
+++ b/drivers/md/raid1.h
@@ -126,4 +126,6 @@
*/
#define R1BIO_Returned 6
+extern int md_raid1_congested(mddev_t *mddev, int bits);
+
#endif
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 346e69b..b72edf3 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -129,7 +129,7 @@
static inline void raid5_set_bi_hw_segments(struct bio *bio, unsigned int cnt)
{
- bio->bi_phys_segments = raid5_bi_phys_segments(bio) || (cnt << 16);
+ bio->bi_phys_segments = raid5_bi_phys_segments(bio) | (cnt << 16);
}
/* Find first data disk in a raid6 stripe */
@@ -514,7 +514,7 @@
bi = &sh->dev[i].req;
bi->bi_rw = rw;
- if (rw == WRITE)
+ if (rw & WRITE)
bi->bi_end_io = raid5_end_write_request;
else
bi->bi_end_io = raid5_end_read_request;
@@ -548,13 +548,13 @@
bi->bi_io_vec[0].bv_offset = 0;
bi->bi_size = STRIPE_SIZE;
bi->bi_next = NULL;
- if (rw == WRITE &&
+ if ((rw & WRITE) &&
test_bit(R5_ReWrite, &sh->dev[i].flags))
atomic_add(STRIPE_SECTORS,
&rdev->corrected_errors);
generic_make_request(bi);
} else {
- if (rw == WRITE)
+ if (rw & WRITE)
set_bit(STRIPE_DEGRADED, &sh->state);
pr_debug("skip op %ld on disc %d for sector %llu\n",
bi->bi_rw, i, (unsigned long long)sh->sector);
@@ -585,7 +585,7 @@
init_async_submit(&submit, flags, tx, NULL, NULL, NULL);
bio_for_each_segment(bvl, bio, i) {
- int len = bio_iovec_idx(bio, i)->bv_len;
+ int len = bvl->bv_len;
int clen;
int b_offset = 0;
@@ -601,8 +601,8 @@
clen = len;
if (clen > 0) {
- b_offset += bio_iovec_idx(bio, i)->bv_offset;
- bio_page = bio_iovec_idx(bio, i)->bv_page;
+ b_offset += bvl->bv_offset;
+ bio_page = bvl->bv_page;
if (frombio)
tx = async_memcpy(page, bio_page, page_offset,
b_offset, clen, &submit);
@@ -4858,7 +4858,7 @@
printk(KERN_INFO "md/raid:%s: device %s operational as raid"
" disk %d\n",
mdname(mddev), bdevname(rdev->bdev, b), raid_disk);
- } else
+ } else if (rdev->saved_raid_disk != raid_disk)
/* Cannot rely on bitmap to complete recovery */
conf->fullsync = 1;
}
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 9827804..5b6b451 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -1988,6 +1988,14 @@
if (dvbdev->users == -1 && fe->ops.ts_bus_ctrl) {
if ((ret = fe->ops.ts_bus_ctrl(fe, 1)) < 0)
goto err0;
+
+ /* If we took control of the bus, we need to force
+ reinitialization. This is because many ts_bus_ctrl()
+ functions strobe the RESET pin on the demod, and if the
+ frontend thread already exists then the dvb_init() routine
+ won't get called (which is what usually does initial
+ register configuration). */
+ fepriv->reinitialise = 1;
}
if ((ret = dvb_generic_open (inode, file)) < 0)
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 4dc1ca3..7c327b5 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -60,8 +60,6 @@
int act_len, ret;
u8 buf[64];
- if (slen > sizeof(buf))
- slen = sizeof(buf);
memcpy(&buf[0], sbuf, slen);
buf[60] = state->seq++;
@@ -180,30 +178,37 @@
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
int ret = 0, inc, i = 0;
+ u8 buf[52]; /* 4 + 48 (I2C WR USB command header + I2C WR max) */
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
while (i < num) {
if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
- u8 buf[6];
+ if (msg[i].len > 2 || msg[i+1].len > 60) {
+ ret = -EOPNOTSUPP;
+ break;
+ }
buf[0] = CMD_I2C_READ;
buf[1] = (msg[i].addr << 1) | 0x01;
buf[2] = msg[i].buf[0];
buf[3] = msg[i].buf[1];
buf[4] = msg[i].len-1;
buf[5] = msg[i+1].len;
- ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf,
+ ret = anysee_ctrl_msg(d, buf, 6, msg[i+1].buf,
msg[i+1].len);
inc = 2;
} else {
- u8 buf[4+msg[i].len];
+ if (msg[i].len > 48) {
+ ret = -EOPNOTSUPP;
+ break;
+ }
buf[0] = CMD_I2C_WRITE;
buf[1] = (msg[i].addr << 1);
buf[2] = msg[i].len;
buf[3] = 0x01;
memcpy(&buf[4], msg[i].buf, msg[i].len);
- ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+ ret = anysee_ctrl_msg(d, buf, 4 + msg[i].len, NULL, 0);
inc = 1;
}
if (ret)
diff --git a/drivers/media/media-devnode.c b/drivers/media/media-devnode.c
index af5263c..7b42ace 100644
--- a/drivers/media/media-devnode.c
+++ b/drivers/media/media-devnode.c
@@ -213,14 +213,14 @@
/* Part 1: Find a free minor number */
mutex_lock(&media_devnode_lock);
- minor = find_next_zero_bit(media_devnode_nums, 0, MEDIA_NUM_DEVICES);
+ minor = find_next_zero_bit(media_devnode_nums, MEDIA_NUM_DEVICES, 0);
if (minor == MEDIA_NUM_DEVICES) {
mutex_unlock(&media_devnode_lock);
printk(KERN_ERR "could not get a free minor\n");
return -ENFILE;
}
- set_bit(mdev->minor, media_devnode_nums);
+ set_bit(minor, media_devnode_nums);
mutex_unlock(&media_devnode_lock);
mdev->minor = minor;
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index e4c97fd..52798a1 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -168,7 +168,7 @@
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
- depends on ISA && VIDEO_V4L2 && SND
+ depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
select SND_ISA
select SND_MIRO
---help---
@@ -201,7 +201,7 @@
config RADIO_SF16FMR2
tristate "SF16FMR2 Radio"
- depends on ISA && VIDEO_V4L2
+ depends on ISA && VIDEO_V4L2 && SND
---help---
Choose Y here if you have one of these FM radio cards.
diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c
index deca2e0..c9f4a8e6 100644
--- a/drivers/media/radio/si4713-i2c.c
+++ b/drivers/media/radio/si4713-i2c.c
@@ -1033,7 +1033,7 @@
char ps_name[MAX_RDS_PS_NAME + 1];
len = control->size - 1;
- if (len > MAX_RDS_PS_NAME) {
+ if (len < 0 || len > MAX_RDS_PS_NAME) {
rval = -ERANGE;
goto exit;
}
@@ -1057,7 +1057,7 @@
char radio_text[MAX_RDS_RADIO_TEXT + 1];
len = control->size - 1;
- if (len > MAX_RDS_RADIO_TEXT) {
+ if (len < 0 || len > MAX_RDS_RADIO_TEXT) {
rval = -ERANGE;
goto exit;
}
diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c
index 8fa539d..7f7079b 100644
--- a/drivers/media/rc/fintek-cir.c
+++ b/drivers/media/rc/fintek-cir.c
@@ -597,12 +597,17 @@
static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state)
{
struct fintek_dev *fintek = pnp_get_drvdata(pdev);
+ unsigned long flags;
fit_dbg("%s called", __func__);
+ spin_lock_irqsave(&fintek->fintek_lock, flags);
+
/* disable all CIR interrupts */
fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS);
+ spin_unlock_irqrestore(&fintek->fintek_lock, flags);
+
fintek_config_mode_enable(fintek);
/* disable cir logical dev */
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index 3f3c707..6bc35ee 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -307,6 +307,14 @@
/* 0xffdc iMON MCE VFD */
{ 0x00010000ffffffeell, KEY_VOLUMEUP },
{ 0x01000000ffffffeell, KEY_VOLUMEDOWN },
+ { 0x00000001ffffffeell, KEY_MUTE },
+ { 0x0000000fffffffeell, KEY_MEDIA },
+ { 0x00000012ffffffeell, KEY_UP },
+ { 0x00000013ffffffeell, KEY_DOWN },
+ { 0x00000014ffffffeell, KEY_LEFT },
+ { 0x00000015ffffffeell, KEY_RIGHT },
+ { 0x00000016ffffffeell, KEY_ENTER },
+ { 0x00000017ffffffeell, KEY_ESC },
/* iMON Knob values */
{ 0x000100ffffffffeell, KEY_VOLUMEUP },
{ 0x010000ffffffffeell, KEY_VOLUMEDOWN },
@@ -1582,16 +1590,16 @@
/* Only panel type events left to process now */
spin_lock_irqsave(&ictx->kc_lock, flags);
+ do_gettimeofday(&t);
/* KEY_MUTE repeats from knob need to be suppressed */
if (ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) {
- do_gettimeofday(&t);
msec = tv2int(&t, &prev_time);
- prev_time = t;
if (msec < ictx->idev->rep[REP_DELAY]) {
spin_unlock_irqrestore(&ictx->kc_lock, flags);
return;
}
}
+ prev_time = t;
kc = ictx->kc;
spin_unlock_irqrestore(&ictx->kc_lock, flags);
@@ -1603,7 +1611,9 @@
input_report_key(ictx->idev, kc, 0);
input_sync(ictx->idev);
+ spin_lock_irqsave(&ictx->kc_lock, flags);
ictx->last_keycode = kc;
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
return;
@@ -1740,6 +1750,8 @@
detected_display_type = IMON_DISPLAY_TYPE_VFD;
break;
/* iMON VFD, MCE IR */
+ case 0x46:
+ case 0x7e:
case 0x9e:
dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
detected_display_type = IMON_DISPLAY_TYPE_VFD;
@@ -1755,6 +1767,9 @@
dev_info(ictx->dev, "Unknown 0xffdc device, "
"defaulting to VFD and iMON IR");
detected_display_type = IMON_DISPLAY_TYPE_VFD;
+ /* We don't know which one it is, allow user to set the
+ * RC6 one from userspace if OTHER wasn't correct. */
+ allowed_protos |= RC_TYPE_RC6;
break;
}
diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c
index 11c19d8..423ed45 100644
--- a/drivers/media/rc/ir-raw.c
+++ b/drivers/media/rc/ir-raw.c
@@ -114,18 +114,20 @@
s64 delta; /* ns */
DEFINE_IR_RAW_EVENT(ev);
int rc = 0;
+ int delay;
if (!dev->raw)
return -EINVAL;
now = ktime_get();
delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event));
+ delay = MS_TO_NS(dev->input_dev->rep[REP_DELAY]);
/* Check for a long duration since last event or if we're
* being called for the first time, note that delta can't
* possibly be negative.
*/
- if (delta > IR_MAX_DURATION || !dev->raw->last_type)
+ if (delta > delay || !dev->raw->last_type)
type |= IR_START_EVENT;
else
ev.duration = delta;
diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c
index e716b93..ecd3d02 100644
--- a/drivers/media/rc/ite-cir.c
+++ b/drivers/media/rc/ite-cir.c
@@ -1347,6 +1347,7 @@
{ /* 0: ITE8704 */
.model = "ITE8704 CIR transceiver",
.io_region_size = IT87_IOREG_LENGTH,
+ .io_rsrc_no = 0,
.hw_tx_capable = true,
.sample_period = (u32) (1000000000ULL / 115200),
.tx_carrier_freq = 38000,
@@ -1371,6 +1372,7 @@
{ /* 1: ITE8713 */
.model = "ITE8713 CIR transceiver",
.io_region_size = IT87_IOREG_LENGTH,
+ .io_rsrc_no = 0,
.hw_tx_capable = true,
.sample_period = (u32) (1000000000ULL / 115200),
.tx_carrier_freq = 38000,
@@ -1395,6 +1397,7 @@
{ /* 2: ITE8708 */
.model = "ITE8708 CIR transceiver",
.io_region_size = IT8708_IOREG_LENGTH,
+ .io_rsrc_no = 0,
.hw_tx_capable = true,
.sample_period = (u32) (1000000000ULL / 115200),
.tx_carrier_freq = 38000,
@@ -1420,6 +1423,7 @@
{ /* 3: ITE8709 */
.model = "ITE8709 CIR transceiver",
.io_region_size = IT8709_IOREG_LENGTH,
+ .io_rsrc_no = 2,
.hw_tx_capable = true,
.sample_period = (u32) (1000000000ULL / 115200),
.tx_carrier_freq = 38000,
@@ -1461,6 +1465,7 @@
struct rc_dev *rdev = NULL;
int ret = -ENOMEM;
int model_no;
+ int io_rsrc_no;
ite_dbg("%s called", __func__);
@@ -1490,10 +1495,11 @@
/* get the description for the device */
dev_desc = &ite_dev_descs[model_no];
+ io_rsrc_no = dev_desc->io_rsrc_no;
/* validate pnp resources */
- if (!pnp_port_valid(pdev, 0) ||
- pnp_port_len(pdev, 0) != dev_desc->io_region_size) {
+ if (!pnp_port_valid(pdev, io_rsrc_no) ||
+ pnp_port_len(pdev, io_rsrc_no) != dev_desc->io_region_size) {
dev_err(&pdev->dev, "IR PNP Port not valid!\n");
goto failure;
}
@@ -1504,7 +1510,7 @@
}
/* store resource values */
- itdev->cir_addr = pnp_port_start(pdev, 0);
+ itdev->cir_addr = pnp_port_start(pdev, io_rsrc_no);
itdev->cir_irq = pnp_irq(pdev, 0);
/* initialize spinlocks */
diff --git a/drivers/media/rc/ite-cir.h b/drivers/media/rc/ite-cir.h
index 16a19f5..aa899a0 100644
--- a/drivers/media/rc/ite-cir.h
+++ b/drivers/media/rc/ite-cir.h
@@ -57,6 +57,9 @@
/* size of the I/O region */
int io_region_size;
+ /* IR pnp I/O resource number */
+ int io_rsrc_no;
+
/* true if the hardware supports transmission */
bool hw_tx_capable;
diff --git a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
index bb10ffe..8d558ae 100644
--- a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
@@ -15,43 +15,39 @@
/* Pinnacle PCTV HD 800i mini remote */
static struct rc_map_table pinnacle_pctv_hd[] = {
-
- { 0x0f, KEY_1 },
- { 0x15, KEY_2 },
- { 0x10, KEY_3 },
- { 0x18, KEY_4 },
- { 0x1b, KEY_5 },
- { 0x1e, KEY_6 },
- { 0x11, KEY_7 },
- { 0x21, KEY_8 },
- { 0x12, KEY_9 },
- { 0x27, KEY_0 },
-
- { 0x24, KEY_ZOOM },
- { 0x2a, KEY_SUBTITLE },
-
- { 0x00, KEY_MUTE },
- { 0x01, KEY_ENTER }, /* Pinnacle Logo */
- { 0x39, KEY_POWER },
-
- { 0x03, KEY_VOLUMEUP },
- { 0x09, KEY_VOLUMEDOWN },
- { 0x06, KEY_CHANNELUP },
- { 0x0c, KEY_CHANNELDOWN },
-
- { 0x2d, KEY_REWIND },
- { 0x30, KEY_PLAYPAUSE },
- { 0x33, KEY_FASTFORWARD },
- { 0x3c, KEY_STOP },
- { 0x36, KEY_RECORD },
- { 0x3f, KEY_EPG }, /* Labeled "?" */
+ /* Key codes for the tiny Pinnacle remote*/
+ { 0x0700, KEY_MUTE },
+ { 0x0701, KEY_MENU }, /* Pinnacle logo */
+ { 0x0739, KEY_POWER },
+ { 0x0703, KEY_VOLUMEUP },
+ { 0x0709, KEY_VOLUMEDOWN },
+ { 0x0706, KEY_CHANNELUP },
+ { 0x070c, KEY_CHANNELDOWN },
+ { 0x070f, KEY_1 },
+ { 0x0715, KEY_2 },
+ { 0x0710, KEY_3 },
+ { 0x0718, KEY_4 },
+ { 0x071b, KEY_5 },
+ { 0x071e, KEY_6 },
+ { 0x0711, KEY_7 },
+ { 0x0721, KEY_8 },
+ { 0x0712, KEY_9 },
+ { 0x0727, KEY_0 },
+ { 0x0724, KEY_ZOOM }, /* 'Square' key */
+ { 0x072a, KEY_SUBTITLE }, /* 'T' key */
+ { 0x072d, KEY_REWIND },
+ { 0x0730, KEY_PLAYPAUSE },
+ { 0x0733, KEY_FASTFORWARD },
+ { 0x0736, KEY_RECORD },
+ { 0x073c, KEY_STOP },
+ { 0x073f, KEY_HELP }, /* '?' key */
};
static struct rc_map_list pinnacle_pctv_hd_map = {
.map = {
.scan = pinnacle_pctv_hd,
.size = ARRAY_SIZE(pinnacle_pctv_hd),
- .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */
+ .rc_type = RC_TYPE_RC5,
.name = RC_MAP_PINNACLE_PCTV_HD,
}
};
diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c
index fd237ab..27997a9 100644
--- a/drivers/media/rc/lirc_dev.c
+++ b/drivers/media/rc/lirc_dev.c
@@ -55,6 +55,8 @@
struct lirc_buffer *buf;
unsigned int chunk_size;
+ struct cdev *cdev;
+
struct task_struct *task;
long jiffies_to_wait;
};
@@ -62,7 +64,6 @@
static DEFINE_MUTEX(lirc_dev_lock);
static struct irctl *irctls[MAX_IRCTL_DEVICES];
-static struct cdev cdevs[MAX_IRCTL_DEVICES];
/* Only used for sysfs but defined to void otherwise */
static struct class *lirc_class;
@@ -167,9 +168,13 @@
static int lirc_cdev_add(struct irctl *ir)
{
- int retval;
+ int retval = -ENOMEM;
struct lirc_driver *d = &ir->d;
- struct cdev *cdev = &cdevs[d->minor];
+ struct cdev *cdev;
+
+ cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+ if (!cdev)
+ goto err_out;
if (d->fops) {
cdev_init(cdev, d->fops);
@@ -180,12 +185,20 @@
}
retval = kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
if (retval)
- return retval;
+ goto err_out;
retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1);
- if (retval)
+ if (retval) {
kobject_put(&cdev->kobj);
+ goto err_out;
+ }
+ ir->cdev = cdev;
+
+ return 0;
+
+err_out:
+ kfree(cdev);
return retval;
}
@@ -214,7 +227,7 @@
if (MAX_IRCTL_DEVICES <= d->minor) {
dev_err(d->dev, "lirc_dev: lirc_register_driver: "
"\"minor\" must be between 0 and %d (%d)!\n",
- MAX_IRCTL_DEVICES-1, d->minor);
+ MAX_IRCTL_DEVICES - 1, d->minor);
err = -EBADRQC;
goto out;
}
@@ -369,7 +382,7 @@
if (minor < 0 || minor >= MAX_IRCTL_DEVICES) {
printk(KERN_ERR "lirc_dev: %s: minor (%d) must be between "
- "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES-1);
+ "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES - 1);
return -EBADRQC;
}
@@ -380,7 +393,7 @@
return -ENOENT;
}
- cdev = &cdevs[minor];
+ cdev = ir->cdev;
mutex_lock(&lirc_dev_lock);
@@ -410,6 +423,7 @@
} else {
lirc_irctl_cleanup(ir);
cdev_del(cdev);
+ kfree(cdev);
kfree(ir);
irctls[minor] = NULL;
}
@@ -453,7 +467,7 @@
goto error;
}
- cdev = &cdevs[iminor(inode)];
+ cdev = ir->cdev;
if (try_module_get(cdev->owner)) {
ir->open++;
retval = ir->d.set_use_inc(ir->d.data);
@@ -484,13 +498,15 @@
int lirc_dev_fop_close(struct inode *inode, struct file *file)
{
struct irctl *ir = irctls[iminor(inode)];
- struct cdev *cdev = &cdevs[iminor(inode)];
+ struct cdev *cdev;
if (!ir) {
printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
return -EINVAL;
}
+ cdev = ir->cdev;
+
dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor);
WARN_ON(mutex_lock_killable(&lirc_dev_lock));
@@ -503,6 +519,7 @@
lirc_irctl_cleanup(ir);
cdev_del(cdev);
irctls[ir->d.minor] = NULL;
+ kfree(cdev);
kfree(ir);
}
diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c
index ad927fc..ec972dc 100644
--- a/drivers/media/rc/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -108,6 +108,12 @@
static int debug;
#endif
+#define mce_dbg(dev, fmt, ...) \
+ do { \
+ if (debug) \
+ dev_info(dev, fmt, ## __VA_ARGS__); \
+ } while (0)
+
/* general constants */
#define SEND_FLAG_IN_PROGRESS 1
#define SEND_FLAG_COMPLETE 2
@@ -246,6 +252,9 @@
.driver_info = MCE_GEN2_TX_INV },
/* SMK eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_SMK, 0x0338) },
+ /* SMK/I-O Data GV-MC7/RCKIT Receiver */
+ { USB_DEVICE(VENDOR_SMK, 0x0353),
+ .driver_info = MCE_GEN2_NO_TX },
/* Tatung eHome Infrared Transceiver */
{ USB_DEVICE(VENDOR_TATUNG, 0x9150) },
/* Shuttle eHome Infrared Transceiver */
@@ -549,9 +558,10 @@
inout, data1);
break;
case MCE_CMD_S_TIMEOUT:
- /* value is in units of 50us, so x*50/100 or x/2 ms */
+ /* value is in units of 50us, so x*50/1000 ms */
dev_info(dev, "%s receive timeout of %d ms\n",
- inout, ((data1 << 8) | data2) / 2);
+ inout,
+ ((data1 << 8) | data2) * MCE_TIME_UNIT / 1000);
break;
case MCE_CMD_G_TIMEOUT:
dev_info(dev, "Get receive timeout\n");
@@ -606,12 +616,15 @@
if (ir) {
len = urb->actual_length;
- dev_dbg(ir->dev, "callback called (status=%d len=%d)\n",
+ mce_dbg(ir->dev, "callback called (status=%d len=%d)\n",
urb->status, len);
mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
}
+ /* the transfer buffer and urb were allocated in mce_request_packet */
+ kfree(urb->transfer_buffer);
+ usb_free_urb(urb);
}
/* request incoming or send outgoing usb packet - used to initialize remote */
@@ -655,17 +668,17 @@
return;
}
- dev_dbg(dev, "receive request called (size=%#x)\n", size);
+ mce_dbg(dev, "receive request called (size=%#x)\n", size);
async_urb->transfer_buffer_length = size;
async_urb->dev = ir->usbdev;
res = usb_submit_urb(async_urb, GFP_ATOMIC);
if (res) {
- dev_dbg(dev, "receive request FAILED! (res=%d)\n", res);
+ mce_dbg(dev, "receive request FAILED! (res=%d)\n", res);
return;
}
- dev_dbg(dev, "receive request complete (res=%d)\n", res);
+ mce_dbg(dev, "receive request complete (res=%d)\n", res);
}
static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
@@ -673,9 +686,9 @@
mce_request_packet(ir, data, size, MCEUSB_TX);
}
-static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
+static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size)
{
- mce_request_packet(ir, data, size, MCEUSB_RX);
+ mce_request_packet(ir, NULL, size, MCEUSB_RX);
}
/* Send data out the IR blaster port(s) */
@@ -794,7 +807,7 @@
ir->carrier = carrier;
cmdbuf[2] = MCE_CMD_SIG_END;
cmdbuf[3] = MCE_IRDATA_TRAILER;
- dev_dbg(ir->dev, "%s: disabling carrier "
+ mce_dbg(ir->dev, "%s: disabling carrier "
"modulation\n", __func__);
mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
return carrier;
@@ -806,7 +819,7 @@
ir->carrier = carrier;
cmdbuf[2] = prescaler;
cmdbuf[3] = divisor;
- dev_dbg(ir->dev, "%s: requesting %u HZ "
+ mce_dbg(ir->dev, "%s: requesting %u HZ "
"carrier\n", __func__, carrier);
/* Transmit new carrier to mce device */
@@ -835,7 +848,7 @@
switch (ir->buf_in[index]) {
/* 2-byte return value commands */
case MCE_CMD_S_TIMEOUT:
- ir->rc->timeout = US_TO_NS((hi << 8 | lo) / 2);
+ ir->rc->timeout = US_TO_NS((hi << 8 | lo) * MCE_TIME_UNIT);
break;
/* 1-byte return value commands */
@@ -879,7 +892,7 @@
rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
* US_TO_NS(MCE_TIME_UNIT);
- dev_dbg(ir->dev, "Storing %s with duration %d\n",
+ mce_dbg(ir->dev, "Storing %s with duration %d\n",
rawir.pulse ? "pulse" : "space",
rawir.duration);
@@ -911,7 +924,7 @@
if (ir->parser_state != CMD_HEADER && !ir->rem)
ir->parser_state = CMD_HEADER;
}
- dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
+ mce_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
ir_raw_event_handle(ir->rc);
}
@@ -933,7 +946,7 @@
if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
ir->send_flags = SEND_FLAG_COMPLETE;
- dev_dbg(ir->dev, "setup answer received %d bytes\n",
+ mce_dbg(ir->dev, "setup answer received %d bytes\n",
buf_len);
}
@@ -951,7 +964,7 @@
case -EPIPE:
default:
- dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
+ mce_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
break;
}
@@ -961,7 +974,6 @@
static void mceusb_gen1_init(struct mceusb_dev *ir)
{
int ret;
- int maxp = ir->len_in;
struct device *dev = ir->dev;
char *data;
@@ -978,8 +990,8 @@
ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
data, USB_CTRL_MSG_SZ, HZ * 3);
- dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
- dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
+ mce_dbg(dev, "%s - ret = %d\n", __func__, ret);
+ mce_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
__func__, data[0], data[1]);
/* set feature: bit rate 38400 bps */
@@ -987,71 +999,56 @@
USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
0xc04e, 0x0000, NULL, 0, HZ * 3);
- dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
+ mce_dbg(dev, "%s - ret = %d\n", __func__, ret);
/* bRequest 4: set char length to 8 bits */
ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
4, USB_TYPE_VENDOR,
0x0808, 0x0000, NULL, 0, HZ * 3);
- dev_dbg(dev, "%s - retB = %d\n", __func__, ret);
+ mce_dbg(dev, "%s - retB = %d\n", __func__, ret);
/* bRequest 2: set handshaking to use DTR/DSR */
ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
2, USB_TYPE_VENDOR,
0x0000, 0x0100, NULL, 0, HZ * 3);
- dev_dbg(dev, "%s - retC = %d\n", __func__, ret);
+ mce_dbg(dev, "%s - retC = %d\n", __func__, ret);
/* device reset */
mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
- mce_sync_in(ir, NULL, maxp);
/* get hw/sw revision? */
mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
- mce_sync_in(ir, NULL, maxp);
kfree(data);
};
static void mceusb_gen2_init(struct mceusb_dev *ir)
{
- int maxp = ir->len_in;
-
/* device reset */
mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
- mce_sync_in(ir, NULL, maxp);
/* get hw/sw revision? */
mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
- mce_sync_in(ir, NULL, maxp);
/* unknown what the next two actually return... */
mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
- mce_sync_in(ir, NULL, maxp);
mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
- mce_sync_in(ir, NULL, maxp);
}
static void mceusb_get_parameters(struct mceusb_dev *ir)
{
- int maxp = ir->len_in;
-
/* get the carrier and frequency */
mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
- mce_sync_in(ir, NULL, maxp);
- if (!ir->flags.no_tx) {
+ if (!ir->flags.no_tx)
/* get the transmitter bitmask */
mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
- mce_sync_in(ir, NULL, maxp);
- }
/* get receiver timeout value */
mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
- mce_sync_in(ir, NULL, maxp);
/* get receiver sensor setting */
mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
- mce_sync_in(ir, NULL, maxp);
}
static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
@@ -1082,7 +1079,7 @@
rc->priv = ir;
rc->driver_type = RC_DRIVER_IR_RAW;
rc->allowed_protos = RC_TYPE_ALL;
- rc->timeout = US_TO_NS(1000);
+ rc->timeout = MS_TO_NS(100);
if (!ir->flags.no_tx) {
rc->s_tx_mask = mceusb_set_tx_mask;
rc->s_tx_carrier = mceusb_set_tx_carrier;
@@ -1122,7 +1119,7 @@
bool tx_mask_normal;
int ir_intfnum;
- dev_dbg(&intf->dev, "%s called\n", __func__);
+ mce_dbg(&intf->dev, "%s called\n", __func__);
idesc = intf->cur_altsetting;
@@ -1150,7 +1147,7 @@
ep_in = ep;
ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
ep_in->bInterval = 1;
- dev_dbg(&intf->dev, "acceptable inbound endpoint "
+ mce_dbg(&intf->dev, "acceptable inbound endpoint "
"found\n");
}
@@ -1165,12 +1162,12 @@
ep_out = ep;
ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
ep_out->bInterval = 1;
- dev_dbg(&intf->dev, "acceptable outbound endpoint "
+ mce_dbg(&intf->dev, "acceptable outbound endpoint "
"found\n");
}
}
if (ep_in == NULL) {
- dev_dbg(&intf->dev, "inbound and/or endpoint not found\n");
+ mce_dbg(&intf->dev, "inbound and/or endpoint not found\n");
return -ENODEV;
}
@@ -1215,16 +1212,16 @@
if (!ir->rc)
goto rc_dev_fail;
- /* flush buffers on the device */
- mce_sync_in(ir, NULL, maxp);
- mce_sync_in(ir, NULL, maxp);
-
/* wire up inbound data handler */
usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
ir->urb_in->transfer_dma = ir->dma_in;
ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ /* flush buffers on the device */
+ mce_dbg(&intf->dev, "Flushing receive buffers\n");
+ mce_flush_rx_buffer(ir, maxp);
+
/* initialize device */
if (ir->flags.microsoft_gen1)
mceusb_gen1_init(ir);
diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index bf3060e..ce595f9 100644
--- a/drivers/media/rc/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -991,7 +991,6 @@
unsigned long flags;
spin_lock_irqsave(&nvt->nvt_lock, flags);
- nvt->in_use = true;
nvt_enable_cir(nvt);
spin_unlock_irqrestore(&nvt->nvt_lock, flags);
@@ -1004,7 +1003,6 @@
unsigned long flags;
spin_lock_irqsave(&nvt->nvt_lock, flags);
- nvt->in_use = false;
nvt_disable_cir(nvt);
spin_unlock_irqrestore(&nvt->nvt_lock, flags);
}
@@ -1112,7 +1110,7 @@
rdev->dev.parent = &pdev->dev;
rdev->driver_name = NVT_DRIVER_NAME;
rdev->map_name = RC_MAP_RC6_MCE;
- rdev->timeout = US_TO_NS(1000);
+ rdev->timeout = MS_TO_NS(100);
/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD);
#if 0
diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h
index 379795d..1241fc8 100644
--- a/drivers/media/rc/nuvoton-cir.h
+++ b/drivers/media/rc/nuvoton-cir.h
@@ -70,7 +70,6 @@
struct ir_raw_event rawir;
spinlock_t nvt_lock;
- bool in_use;
/* for rx */
u8 buf[RX_BUF_LEN];
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index f57cd56..3186ac7 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -522,18 +522,20 @@
/**
* ir_do_keyup() - internal function to signal the release of a keypress
* @dev: the struct rc_dev descriptor of the device
+ * @sync: whether or not to call input_sync
*
* This function is used internally to release a keypress, it must be
* called with keylock held.
*/
-static void ir_do_keyup(struct rc_dev *dev)
+static void ir_do_keyup(struct rc_dev *dev, bool sync)
{
if (!dev->keypressed)
return;
IR_dprintk(1, "keyup key 0x%04x\n", dev->last_keycode);
input_report_key(dev->input_dev, dev->last_keycode, 0);
- input_sync(dev->input_dev);
+ if (sync)
+ input_sync(dev->input_dev);
dev->keypressed = false;
}
@@ -549,7 +551,7 @@
unsigned long flags;
spin_lock_irqsave(&dev->keylock, flags);
- ir_do_keyup(dev);
+ ir_do_keyup(dev, true);
spin_unlock_irqrestore(&dev->keylock, flags);
}
EXPORT_SYMBOL_GPL(rc_keyup);
@@ -578,7 +580,7 @@
*/
spin_lock_irqsave(&dev->keylock, flags);
if (time_is_before_eq_jiffies(dev->keyup_jiffies))
- ir_do_keyup(dev);
+ ir_do_keyup(dev, true);
spin_unlock_irqrestore(&dev->keylock, flags);
}
@@ -597,6 +599,7 @@
spin_lock_irqsave(&dev->keylock, flags);
input_event(dev->input_dev, EV_MSC, MSC_SCAN, dev->last_scancode);
+ input_sync(dev->input_dev);
if (!dev->keypressed)
goto out;
@@ -622,29 +625,28 @@
static void ir_do_keydown(struct rc_dev *dev, int scancode,
u32 keycode, u8 toggle)
{
+ bool new_event = !dev->keypressed ||
+ dev->last_scancode != scancode ||
+ dev->last_toggle != toggle;
+
+ if (new_event && dev->keypressed)
+ ir_do_keyup(dev, false);
+
input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
- /* Repeat event? */
- if (dev->keypressed &&
- dev->last_scancode == scancode &&
- dev->last_toggle == toggle)
- return;
+ if (new_event && keycode != KEY_RESERVED) {
+ /* Register a keypress */
+ dev->keypressed = true;
+ dev->last_scancode = scancode;
+ dev->last_toggle = toggle;
+ dev->last_keycode = keycode;
- /* Release old keypress */
- ir_do_keyup(dev);
+ IR_dprintk(1, "%s: key down event, "
+ "key 0x%04x, scancode 0x%04x\n",
+ dev->input_name, keycode, scancode);
+ input_report_key(dev->input_dev, keycode, 1);
+ }
- dev->last_scancode = scancode;
- dev->last_toggle = toggle;
- dev->last_keycode = keycode;
-
- if (keycode == KEY_RESERVED)
- return;
-
- /* Register a keypress */
- dev->keypressed = true;
- IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
- dev->input_name, keycode, scancode);
- input_report_key(dev->input_dev, dev->last_keycode, 1);
input_sync(dev->input_dev);
}
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index a97cf27..834a483 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -3474,7 +3474,7 @@
if (0 != t->index)
return -EINVAL;
- bttv_call_all(btv, tuner, g_tuner, t);
+ bttv_call_all(btv, tuner, s_tuner, t);
return 0;
}
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index 1933d4d..e80134f 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -695,14 +695,10 @@
cx18_call_all(cx, tuner, g_tuner, vt);
- if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) {
+ if (vt->type == V4L2_TUNER_RADIO)
strlcpy(vt->name, "cx18 Radio Tuner", sizeof(vt->name));
- vt->type = V4L2_TUNER_RADIO;
- } else {
+ else
strlcpy(vt->name, "cx18 TV Tuner", sizeof(vt->name));
- vt->type = V4L2_TUNER_ANALOG_TV;
- }
-
return 0;
}
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 2354336..934185c 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -25,8 +25,8 @@
#include <linux/delay.h>
#include <media/cx25840.h>
#include <linux/firmware.h>
-#include <staging/altera.h>
+#include "../../../staging/altera-stapl/altera.h"
#include "cx23885.h"
#include "tuner-xc2028.h"
#include "netup-init.h"
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 64d9b21..419777a 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -2060,12 +2060,8 @@
goto fail_irq;
}
- if (!pci_enable_msi(pci_dev))
- err = request_irq(pci_dev->irq, cx23885_irq,
- IRQF_DISABLED, dev->name, dev);
- else
- err = request_irq(pci_dev->irq, cx23885_irq,
- IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+ err = request_irq(pci_dev->irq, cx23885_irq,
+ IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
if (err < 0) {
printk(KERN_ERR "%s: can't get IRQ %d\n",
dev->name, pci_dev->irq);
@@ -2114,7 +2110,6 @@
/* unregister stuff */
free_irq(pci_dev->irq, dev);
- pci_disable_msi(pci_dev);
cx23885_dev_unregister(dev);
v4l2_device_unregister(v4l2_dev);
diff --git a/drivers/media/video/gspca/coarse_expo_autogain.h b/drivers/media/video/gspca/coarse_expo_autogain.h
deleted file mode 100644
index 1cb9d94..0000000
--- a/drivers/media/video/gspca/coarse_expo_autogain.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Auto gain algorithm for camera's with a coarse exposure control
- *
- * Copyright (C) 2010 Hans de Goede <hdegoede@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/* Autogain + exposure algorithm for cameras with a coarse exposure control
- (usually this means we can only control the clockdiv to change exposure)
- As changing the clockdiv so that the fps drops from 30 to 15 fps for
- example, will lead to a huge exposure change (it effectively doubles),
- this algorithm normally tries to only adjust the gain (between 40 and
- 80 %) and if that does not help, only then changes exposure. This leads
- to a much more stable image then using the knee algorithm which at
- certain points of the knee graph will only try to adjust exposure,
- which leads to oscilating as one exposure step is huge.
-
- Note this assumes that the sd struct for the cam in question has
- exp_too_high_cnt and exp_too_high_cnt int members for use by this function.
-
- Returns 0 if no changes were made, 1 if the gain and or exposure settings
- where changed. */
-static int gspca_coarse_grained_expo_autogain(struct gspca_dev *gspca_dev,
- int avg_lum, int desired_avg_lum, int deadzone)
-{
- int i, steps, gain, orig_gain, exposure, orig_exposure;
- int gain_low, gain_high;
- const struct ctrl *gain_ctrl = NULL;
- const struct ctrl *exposure_ctrl = NULL;
- struct sd *sd = (struct sd *) gspca_dev;
- int retval = 0;
-
- for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
- if (gspca_dev->ctrl_dis & (1 << i))
- continue;
- if (gspca_dev->sd_desc->ctrls[i].qctrl.id == V4L2_CID_GAIN)
- gain_ctrl = &gspca_dev->sd_desc->ctrls[i];
- if (gspca_dev->sd_desc->ctrls[i].qctrl.id == V4L2_CID_EXPOSURE)
- exposure_ctrl = &gspca_dev->sd_desc->ctrls[i];
- }
- if (!gain_ctrl || !exposure_ctrl) {
- PDEBUG(D_ERR, "Error: gspca_coarse_grained_expo_autogain "
- "called on cam without gain or exposure");
- return 0;
- }
-
- if (gain_ctrl->get(gspca_dev, &gain) ||
- exposure_ctrl->get(gspca_dev, &exposure))
- return 0;
-
- orig_gain = gain;
- orig_exposure = exposure;
- gain_low =
- (gain_ctrl->qctrl.maximum - gain_ctrl->qctrl.minimum) / 5 * 2;
- gain_low += gain_ctrl->qctrl.minimum;
- gain_high =
- (gain_ctrl->qctrl.maximum - gain_ctrl->qctrl.minimum) / 5 * 4;
- gain_high += gain_ctrl->qctrl.minimum;
-
- /* If we are of a multiple of deadzone, do multiple steps to reach the
- desired lumination fast (with the risc of a slight overshoot) */
- steps = (desired_avg_lum - avg_lum) / deadzone;
-
- PDEBUG(D_FRAM, "autogain: lum: %d, desired: %d, steps: %d",
- avg_lum, desired_avg_lum, steps);
-
- if ((gain + steps) > gain_high &&
- sd->exposure < exposure_ctrl->qctrl.maximum) {
- gain = gain_high;
- sd->exp_too_low_cnt++;
- } else if ((gain + steps) < gain_low &&
- sd->exposure > exposure_ctrl->qctrl.minimum) {
- gain = gain_low;
- sd->exp_too_high_cnt++;
- } else {
- gain += steps;
- if (gain > gain_ctrl->qctrl.maximum)
- gain = gain_ctrl->qctrl.maximum;
- else if (gain < gain_ctrl->qctrl.minimum)
- gain = gain_ctrl->qctrl.minimum;
- sd->exp_too_high_cnt = 0;
- sd->exp_too_low_cnt = 0;
- }
-
- if (sd->exp_too_high_cnt > 3) {
- exposure--;
- sd->exp_too_high_cnt = 0;
- } else if (sd->exp_too_low_cnt > 3) {
- exposure++;
- sd->exp_too_low_cnt = 0;
- }
-
- if (gain != orig_gain) {
- gain_ctrl->set(gspca_dev, gain);
- retval = 1;
- }
- if (exposure != orig_exposure) {
- exposure_ctrl->set(gspca_dev, exposure);
- retval = 1;
- }
-
- return retval;
-}
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 36a46fc..057e287 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -609,7 +609,7 @@
* buffers, there are some pretty strict real time constraints for
* isochronous transfer for larger frame sizes).
*/
-/*jfm: this value works well for 1600x1200, but not 800x600 - see isoc_init */
+/*jfm: this value does not work for 800x600 - see isoc_init */
#define OVFX2_BULK_SIZE (13 * 4096)
/* I2C registers */
@@ -3307,6 +3307,7 @@
gspca_dev->cam.ctrls = sd->ctrls;
sd->quality = QUALITY_DEF;
+ sd->frame_rate = 15;
return 0;
}
@@ -3469,7 +3470,6 @@
ARRAY_SIZE(init_519_ov7660));
write_i2c_regvals(sd, norm_7660, ARRAY_SIZE(norm_7660));
sd->gspca_dev.curr_mode = 1; /* 640x480 */
- sd->frame_rate = 15;
ov519_set_mode(sd);
ov519_set_fr(sd);
sd->ctrls[COLORS].max = 4; /* 0..4 */
@@ -3511,7 +3511,7 @@
switch (sd->bridge) {
case BRIDGE_OVFX2:
- if (gspca_dev->width == 1600)
+ if (gspca_dev->width != 800)
gspca_dev->cam.bulk_size = OVFX2_BULK_SIZE;
else
gspca_dev->cam.bulk_size = 7 * 4096;
@@ -4478,7 +4478,7 @@
gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
/* A short read signals EOF */
- if (len < OVFX2_BULK_SIZE) {
+ if (len < gspca_dev->cam.bulk_size) {
/* If the frame is short, and it is one of the first ones
the sensor and bridge are still syncing, so drop it. */
if (sd->first_frame) {
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 6415aff..81b8a60 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -60,7 +60,7 @@
u32 pktsz; /* (used by pkt_scan) */
u16 npkt;
- u8 nchg;
+ s8 nchg;
s8 short_mark;
u8 quality; /* image quality */
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h
index b538dce..a14a84a 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h
@@ -125,7 +125,7 @@
#define HDCS_SLEEP_MODE (1 << 1)
#define HDCS_DEFAULT_EXPOSURE 48
-#define HDCS_DEFAULT_GAIN 128
+#define HDCS_DEFAULT_GAIN 50
static int hdcs_probe_1x00(struct sd *sd);
static int hdcs_probe_1020(struct sd *sd);
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index a4e4dfd..0fb7552 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -1328,6 +1328,8 @@
if (!itv->has_cx23415)
write_reg_sync(0x03, IVTV_REG_DMACONTROL);
+ ivtv_s_std_enc(itv, &itv->tuner_std);
+
/* Default interrupts enabled. For the PVR350 this includes the
decoder VSYNC interrupt, which is always on. It is not only used
during decoding but also by the OSD.
@@ -1336,12 +1338,10 @@
if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT | IVTV_IRQ_DEC_VSYNC);
ivtv_set_osd_alpha(itv);
- }
- else
+ ivtv_s_std_dec(itv, &itv->tuner_std);
+ } else {
ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT);
-
- /* For cards with video out, this call needs interrupts enabled */
- ivtv_s_std(NULL, &fh, &itv->tuner_std);
+ }
/* Setup initial controls */
cx2341x_handler_setup(&itv->cxhdl);
diff --git a/drivers/media/video/ivtv/ivtv-firmware.c b/drivers/media/video/ivtv/ivtv-firmware.c
index 14a1cea..02c5ade 100644
--- a/drivers/media/video/ivtv/ivtv-firmware.c
+++ b/drivers/media/video/ivtv/ivtv-firmware.c
@@ -280,8 +280,6 @@
{
int rc = 0;
v4l2_std_id std;
- struct ivtv_open_id fh;
- fh.itv = itv;
if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)
/* Display test image during restart */
@@ -301,14 +299,19 @@
/* Allow settings to reload */
ivtv_mailbox_cache_invalidate(itv);
- /* Restore video standard */
+ /* Restore encoder video standard */
std = itv->std;
itv->std = 0;
- ivtv_s_std(NULL, &fh, &std);
+ ivtv_s_std_enc(itv, &std);
if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
ivtv_init_mpeg_decoder(itv);
+ /* Restore decoder video standard */
+ std = itv->std_out;
+ itv->std_out = 0;
+ ivtv_s_std_dec(itv, &std);
+
/* Restore framebuffer if active */
if (itv->ivtvfb_restore)
itv->ivtvfb_restore(itv);
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 1689783..120c7d8 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -1071,28 +1071,8 @@
return 0;
}
-int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std)
+void ivtv_s_std_enc(struct ivtv *itv, v4l2_std_id *std)
{
- DEFINE_WAIT(wait);
- struct ivtv *itv = fh2id(fh)->itv;
- struct yuv_playback_info *yi = &itv->yuv_info;
- int f;
-
- if ((*std & V4L2_STD_ALL) == 0)
- return -EINVAL;
-
- if (*std == itv->std)
- return 0;
-
- if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags) ||
- atomic_read(&itv->capturing) > 0 ||
- atomic_read(&itv->decoding) > 0) {
- /* Switching standard would turn off the radio or mess
- with already running streams, prevent that by
- returning EBUSY. */
- return -EBUSY;
- }
-
itv->std = *std;
itv->is_60hz = (*std & V4L2_STD_525_60) ? 1 : 0;
itv->is_50hz = !itv->is_60hz;
@@ -1106,48 +1086,79 @@
if (itv->hw_flags & IVTV_HW_CX25840)
itv->vbi.sliced_decoder_line_size = itv->is_60hz ? 272 : 284;
- IVTV_DEBUG_INFO("Switching standard to %llx.\n", (unsigned long long)itv->std);
-
/* Tuner */
ivtv_call_all(itv, core, s_std, itv->std);
+}
- if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) {
- /* set display standard */
- itv->std_out = *std;
- itv->is_out_60hz = itv->is_60hz;
- itv->is_out_50hz = itv->is_50hz;
- ivtv_call_all(itv, video, s_std_output, itv->std_out);
+void ivtv_s_std_dec(struct ivtv *itv, v4l2_std_id *std)
+{
+ struct yuv_playback_info *yi = &itv->yuv_info;
+ DEFINE_WAIT(wait);
+ int f;
- /*
- * The next firmware call is time sensitive. Time it to
- * avoid risk of a hard lock, by trying to ensure the call
- * happens within the first 100 lines of the top field.
- * Make 4 attempts to sync to the decoder before giving up.
- */
- for (f = 0; f < 4; f++) {
- prepare_to_wait(&itv->vsync_waitq, &wait,
- TASK_UNINTERRUPTIBLE);
- if ((read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16) < 100)
- break;
- schedule_timeout(msecs_to_jiffies(25));
- }
- finish_wait(&itv->vsync_waitq, &wait);
+ /* set display standard */
+ itv->std_out = *std;
+ itv->is_out_60hz = (*std & V4L2_STD_525_60) ? 1 : 0;
+ itv->is_out_50hz = !itv->is_out_60hz;
+ ivtv_call_all(itv, video, s_std_output, itv->std_out);
- if (f == 4)
- IVTV_WARN("Mode change failed to sync to decoder\n");
-
- ivtv_vapi(itv, CX2341X_DEC_SET_STANDARD, 1, itv->is_out_50hz);
- itv->main_rect.left = itv->main_rect.top = 0;
- itv->main_rect.width = 720;
- itv->main_rect.height = itv->cxhdl.height;
- ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4,
- 720, itv->main_rect.height, 0, 0);
- yi->main_rect = itv->main_rect;
- if (!itv->osd_info) {
- yi->osd_full_w = 720;
- yi->osd_full_h = itv->is_out_50hz ? 576 : 480;
- }
+ /*
+ * The next firmware call is time sensitive. Time it to
+ * avoid risk of a hard lock, by trying to ensure the call
+ * happens within the first 100 lines of the top field.
+ * Make 4 attempts to sync to the decoder before giving up.
+ */
+ for (f = 0; f < 4; f++) {
+ prepare_to_wait(&itv->vsync_waitq, &wait,
+ TASK_UNINTERRUPTIBLE);
+ if ((read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16) < 100)
+ break;
+ schedule_timeout(msecs_to_jiffies(25));
}
+ finish_wait(&itv->vsync_waitq, &wait);
+
+ if (f == 4)
+ IVTV_WARN("Mode change failed to sync to decoder\n");
+
+ ivtv_vapi(itv, CX2341X_DEC_SET_STANDARD, 1, itv->is_out_50hz);
+ itv->main_rect.left = 0;
+ itv->main_rect.top = 0;
+ itv->main_rect.width = 720;
+ itv->main_rect.height = itv->is_out_50hz ? 576 : 480;
+ ivtv_vapi(itv, CX2341X_OSD_SET_FRAMEBUFFER_WINDOW, 4,
+ 720, itv->main_rect.height, 0, 0);
+ yi->main_rect = itv->main_rect;
+ if (!itv->osd_info) {
+ yi->osd_full_w = 720;
+ yi->osd_full_h = itv->is_out_50hz ? 576 : 480;
+ }
+}
+
+int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std)
+{
+ struct ivtv *itv = fh2id(fh)->itv;
+
+ if ((*std & V4L2_STD_ALL) == 0)
+ return -EINVAL;
+
+ if (*std == itv->std)
+ return 0;
+
+ if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags) ||
+ atomic_read(&itv->capturing) > 0 ||
+ atomic_read(&itv->decoding) > 0) {
+ /* Switching standard would mess with already running
+ streams, prevent that by returning EBUSY. */
+ return -EBUSY;
+ }
+
+ IVTV_DEBUG_INFO("Switching standard to %llx.\n",
+ (unsigned long long)itv->std);
+
+ ivtv_s_std_enc(itv, std);
+ if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)
+ ivtv_s_std_dec(itv, std);
+
return 0;
}
@@ -1173,14 +1184,10 @@
ivtv_call_all(itv, tuner, g_tuner, vt);
- if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags)) {
+ if (vt->type == V4L2_TUNER_RADIO)
strlcpy(vt->name, "ivtv Radio Tuner", sizeof(vt->name));
- vt->type = V4L2_TUNER_RADIO;
- } else {
+ else
strlcpy(vt->name, "ivtv TV Tuner", sizeof(vt->name));
- vt->type = V4L2_TUNER_ANALOG_TV;
- }
-
return 0;
}
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.h b/drivers/media/video/ivtv/ivtv-ioctl.h
index 58f0034..89185ca 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.h
+++ b/drivers/media/video/ivtv/ivtv-ioctl.h
@@ -27,7 +27,8 @@
void ivtv_set_osd_alpha(struct ivtv *itv);
int ivtv_set_speed(struct ivtv *itv, int speed);
void ivtv_set_funcs(struct video_device *vdev);
-int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std);
+void ivtv_s_std_enc(struct ivtv *itv, v4l2_std_id *std);
+void ivtv_s_std_dec(struct ivtv *itv, v4l2_std_id *std);
int ivtv_s_frequency(struct file *file, void *fh, struct v4l2_frequency *vf);
int ivtv_s_input(struct file *file, void *fh, unsigned int inp);
long ivtv_v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index 9426833..e7794dc 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -589,7 +589,7 @@
v4l2_subdev_call(itv->sd_audio, audio, s_stream, 1);
/* Avoid unpredictable PCI bus hang - disable video clocks */
v4l2_subdev_call(itv->sd_video, video, s_stream, 0);
- ivtv_msleep_timeout(300, 1);
+ ivtv_msleep_timeout(300, 0);
ivtv_vapi(itv, CX2341X_ENC_INITIALIZE_INPUT, 0);
v4l2_subdev_call(itv->sd_video, video, s_stream, 1);
}
@@ -834,7 +834,7 @@
}
/* Handle any pending interrupts */
- ivtv_msleep_timeout(100, 1);
+ ivtv_msleep_timeout(100, 0);
}
atomic_dec(&itv->capturing);
diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c
index b6eb51c..293db80 100644
--- a/drivers/media/video/ivtv/ivtv-vbi.c
+++ b/drivers/media/video/ivtv/ivtv-vbi.c
@@ -71,7 +71,7 @@
Turning this signal on and off can confuse certain
TVs. As far as I can tell there is no reason not to
transmit this signal. */
- if ((itv->std & V4L2_STD_625_50) && !enabled) {
+ if ((itv->std_out & V4L2_STD_625_50) && !enabled) {
enabled = 1;
mode = 0x08; /* 4x3 full format */
}
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index 1724745..6b7c9c8 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -247,7 +247,7 @@
static int ivtvfb_set_display_window(struct ivtv *itv, struct v4l2_rect *ivtv_window)
{
- int osd_height_limit = itv->is_50hz ? 576 : 480;
+ int osd_height_limit = itv->is_out_50hz ? 576 : 480;
/* Only fail if resolution too high, otherwise fudge the start coords. */
if ((ivtv_window->height > osd_height_limit) || (ivtv_window->width > IVTV_OSD_MAX_WIDTH))
@@ -471,9 +471,9 @@
vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT |
FB_VBLANK_HAVE_VSYNC;
trace = read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16;
- if (itv->is_50hz && trace > 312)
+ if (itv->is_out_50hz && trace > 312)
trace -= 312;
- else if (itv->is_60hz && trace > 262)
+ else if (itv->is_out_60hz && trace > 262)
trace -= 262;
if (trace == 1)
vblank.flags |= FB_VBLANK_VSYNCING;
@@ -656,7 +656,7 @@
IVTVFB_DEBUG_INFO("ivtvfb_check_var\n");
/* Set base references for mode calcs. */
- if (itv->is_50hz) {
+ if (itv->is_out_50hz) {
pixclock = 84316;
hlimit = 776;
vlimit = 591;
@@ -784,12 +784,12 @@
If the margins are too large, just center the screen
(enforcing margins causes too many problems) */
- if (var->left_margin + var->xres > IVTV_OSD_MAX_WIDTH + 1) {
+ if (var->left_margin + var->xres > IVTV_OSD_MAX_WIDTH + 1)
var->left_margin = 1 + ((IVTV_OSD_MAX_WIDTH - var->xres) / 2);
- }
- if (var->upper_margin + var->yres > (itv->is_50hz ? 577 : 481)) {
- var->upper_margin = 1 + (((itv->is_50hz ? 576 : 480) - var->yres) / 2);
- }
+
+ if (var->upper_margin + var->yres > (itv->is_out_50hz ? 577 : 481))
+ var->upper_margin = 1 + (((itv->is_out_50hz ? 576 : 480) -
+ var->yres) / 2);
/* Maintain overall 'size' for a constant refresh rate */
var->right_margin = hlimit - var->left_margin - var->xres;
@@ -836,7 +836,12 @@
u32 osd_pan_index;
struct ivtv *itv = (struct ivtv *) info->par;
- osd_pan_index = (var->xoffset + (var->yoffset * var->xres_virtual))*var->bits_per_pixel/8;
+ if (var->yoffset + info->var.yres > info->var.yres_virtual ||
+ var->xoffset + info->var.xres > info->var.xres_virtual)
+ return -EINVAL;
+
+ osd_pan_index = var->yoffset * info->fix.line_length
+ + var->xoffset * info->var.bits_per_pixel / 8;
write_reg(osd_pan_index, 0x02A0C);
/* Pass this info back the yuv handler */
@@ -1003,19 +1008,21 @@
/* Hardware coords start at 0, user coords start at 1. */
osd_left--;
- start_window.left = osd_left >= 0 ? osd_left : ((IVTV_OSD_MAX_WIDTH - start_window.width) / 2);
+ start_window.left = osd_left >= 0 ?
+ osd_left : ((IVTV_OSD_MAX_WIDTH - start_window.width) / 2);
oi->display_byte_stride =
start_window.width * oi->bytes_per_pixel;
/* Vertical size & position */
- max_height = itv->is_50hz ? 576 : 480;
+ max_height = itv->is_out_50hz ? 576 : 480;
if (osd_yres > max_height)
osd_yres = max_height;
- start_window.height = osd_yres ? osd_yres : itv->is_50hz ? 480 : 400;
+ start_window.height = osd_yres ?
+ osd_yres : itv->is_out_50hz ? 480 : 400;
/* Check vertical start (osd_upper). */
if (osd_upper + start_window.height > max_height + 1) {
diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h
index 10b55c8..89d09a8 100644
--- a/drivers/media/video/m5mols/m5mols.h
+++ b/drivers/media/video/m5mols/m5mols.h
@@ -2,10 +2,10 @@
* Header for M-5MOLS 8M Pixel camera sensor with ISP
*
* Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
*
* Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -106,23 +106,23 @@
* The each value according to each scenemode is recommended in the documents.
*/
struct m5mols_scenemode {
- u32 metering;
- u32 ev_bias;
- u32 wb_mode;
- u32 wb_preset;
- u32 chroma_en;
- u32 chroma_lvl;
- u32 edge_en;
- u32 edge_lvl;
- u32 af_range;
- u32 fd_mode;
- u32 mcc;
- u32 light;
- u32 flash;
- u32 tone;
- u32 iso;
- u32 capt_mode;
- u32 wdr;
+ u8 metering;
+ u8 ev_bias;
+ u8 wb_mode;
+ u8 wb_preset;
+ u8 chroma_en;
+ u8 chroma_lvl;
+ u8 edge_en;
+ u8 edge_lvl;
+ u8 af_range;
+ u8 fd_mode;
+ u8 mcc;
+ u8 light;
+ u8 flash;
+ u8 tone;
+ u8 iso;
+ u8 capt_mode;
+ u8 wdr;
};
/**
@@ -154,7 +154,6 @@
u8 str[VERSION_STRING_SIZE];
u8 af;
};
-#define VERSION_SIZE sizeof(struct m5mols_version)
/**
* struct m5mols_info - M-5MOLS driver data structure
@@ -216,9 +215,9 @@
bool lock_ae;
bool lock_awb;
u8 resolution;
- u32 interrupt;
- u32 mode;
- u32 mode_save;
+ u8 interrupt;
+ u8 mode;
+ u8 mode_save;
int (*set_power)(struct device *dev, int on);
};
@@ -256,9 +255,11 @@
* +-------+---+----------+-----+------+------+------+------+
* - d[0..3]: according to size1
*/
-int m5mols_read(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
+int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val);
+int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val);
+int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val);
-int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value);
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 value);
/*
* Mode operation of the M-5MOLS
@@ -280,12 +281,12 @@
* The available executing order between each modes are as follows:
* PARAMETER <---> MONITOR <---> CAPTURE
*/
-int m5mols_mode(struct m5mols_info *info, u32 mode);
+int m5mols_mode(struct m5mols_info *info, u8 mode);
-int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg);
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg);
int m5mols_sync_controls(struct m5mols_info *info);
int m5mols_start_capture(struct m5mols_info *info);
-int m5mols_do_scenemode(struct m5mols_info *info, u32 mode);
+int m5mols_do_scenemode(struct m5mols_info *info, u8 mode);
int m5mols_lock_3a(struct m5mols_info *info, bool lock);
int m5mols_set_ctrl(struct v4l2_ctrl *ctrl);
diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c
index d71a390..d947192 100644
--- a/drivers/media/video/m5mols/m5mols_capture.c
+++ b/drivers/media/video/m5mols/m5mols_capture.c
@@ -2,10 +2,10 @@
* The Capture code for Fujitsu M-5MOLS ISP
*
* Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
*
* Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -58,9 +58,9 @@
{
u32 num, den;
- int ret = m5mols_read(sd, addr_num, &num);
+ int ret = m5mols_read_u32(sd, addr_num, &num);
if (!ret)
- ret = m5mols_read(sd, addr_den, &den);
+ ret = m5mols_read_u32(sd, addr_den, &den);
if (ret)
return ret;
*val = den == 0 ? 0 : num / den;
@@ -99,20 +99,20 @@
if (ret)
return ret;
- ret = m5mols_read(sd, EXIF_INFO_ISO, (u32 *)&exif->iso_speed);
+ ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed);
if (!ret)
- ret = m5mols_read(sd, EXIF_INFO_FLASH, (u32 *)&exif->flash);
+ ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash);
if (!ret)
- ret = m5mols_read(sd, EXIF_INFO_SDR, (u32 *)&exif->sdr);
+ ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr);
if (!ret)
- ret = m5mols_read(sd, EXIF_INFO_QVAL, (u32 *)&exif->qval);
+ ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval);
if (ret)
return ret;
if (!ret)
- ret = m5mols_read(sd, CAPC_IMAGE_SIZE, &info->cap.main);
+ ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main);
if (!ret)
- ret = m5mols_read(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
+ ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
if (!ret)
info->cap.total = info->cap.main + info->cap.thumb;
@@ -122,7 +122,7 @@
int m5mols_start_capture(struct m5mols_info *info)
{
struct v4l2_subdev *sd = &info->sd;
- u32 resolution = info->resolution;
+ u8 resolution = info->resolution;
int timeout;
int ret;
diff --git a/drivers/media/video/m5mols/m5mols_controls.c b/drivers/media/video/m5mols/m5mols_controls.c
index 817c16f..d135d20 100644
--- a/drivers/media/video/m5mols/m5mols_controls.c
+++ b/drivers/media/video/m5mols/m5mols_controls.c
@@ -2,10 +2,10 @@
* Controls for M-5MOLS 8M Pixel camera sensor with ISP
*
* Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
*
* Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -130,7 +130,7 @@
*
* WARNING: The execution order is important. Do not change the order.
*/
-int m5mols_do_scenemode(struct m5mols_info *info, u32 mode)
+int m5mols_do_scenemode(struct m5mols_info *info, u8 mode)
{
struct v4l2_subdev *sd = &info->sd;
struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode];
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
index 76eac26..43c68f5 100644
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ b/drivers/media/video/m5mols/m5mols_core.c
@@ -2,10 +2,10 @@
* Driver for M-5MOLS 8M Pixel camera sensor with ISP
*
* Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
*
* Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -133,13 +133,13 @@
/**
* m5mols_read - I2C read function
* @reg: combination of size, category and command for the I2C packet
+ * @size: desired size of I2C packet
* @val: read value
*/
-int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
+static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1];
- u8 size = I2C_SIZE(reg);
u8 category = I2C_CATEGORY(reg);
u8 cmd = I2C_COMMAND(reg);
struct i2c_msg msg[2];
@@ -149,11 +149,6 @@
if (!client->adapter)
return -ENODEV;
- if (size != 1 && size != 2 && size != 4) {
- v4l2_err(sd, "Wrong data size\n");
- return -EINVAL;
- }
-
msg[0].addr = client->addr;
msg[0].flags = 0;
msg[0].len = 5;
@@ -184,6 +179,52 @@
return 0;
}
+int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg, u8 *val)
+{
+ u32 val_32;
+ int ret;
+
+ if (I2C_SIZE(reg) != 1) {
+ v4l2_err(sd, "Wrong data size\n");
+ return -EINVAL;
+ }
+
+ ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32);
+ if (ret)
+ return ret;
+
+ *val = (u8)val_32;
+ return ret;
+}
+
+int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg, u16 *val)
+{
+ u32 val_32;
+ int ret;
+
+ if (I2C_SIZE(reg) != 2) {
+ v4l2_err(sd, "Wrong data size\n");
+ return -EINVAL;
+ }
+
+ ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32);
+ if (ret)
+ return ret;
+
+ *val = (u16)val_32;
+ return ret;
+}
+
+int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val)
+{
+ if (I2C_SIZE(reg) != 4) {
+ v4l2_err(sd, "Wrong data size\n");
+ return -EINVAL;
+ }
+
+ return m5mols_read(sd, I2C_SIZE(reg), reg, val);
+}
+
/**
* m5mols_write - I2C command write function
* @reg: combination of size, category and command for the I2C packet
@@ -231,13 +272,14 @@
return 0;
}
-int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask)
+int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 mask)
{
- u32 busy, i;
+ u8 busy;
+ int i;
int ret;
for (i = 0; i < M5MOLS_I2C_CHECK_RETRY; i++) {
- ret = m5mols_read(sd, I2C_REG(category, cmd, 1), &busy);
+ ret = m5mols_read_u8(sd, I2C_REG(category, cmd, 1), &busy);
if (ret < 0)
return ret;
if ((busy & mask) == mask)
@@ -252,14 +294,14 @@
* Before writing desired interrupt value the INT_FACTOR register should
* be read to clear pending interrupts.
*/
-int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg)
+int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg)
{
struct m5mols_info *info = to_m5mols(sd);
- u32 mask = is_available_af(info) ? REG_INT_AF : 0;
- u32 dummy;
+ u8 mask = is_available_af(info) ? REG_INT_AF : 0;
+ u8 dummy;
int ret;
- ret = m5mols_read(sd, SYSTEM_INT_FACTOR, &dummy);
+ ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy);
if (!ret)
ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask);
return ret;
@@ -271,7 +313,7 @@
* It always accompanies a little delay changing the M-5MOLS mode, so it is
* needed checking current busy status to guarantee right mode.
*/
-static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode)
+static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode)
{
int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode);
@@ -286,16 +328,16 @@
* can be guaranteed only when the sensor is operating in mode which which
* a command belongs to.
*/
-int m5mols_mode(struct m5mols_info *info, u32 mode)
+int m5mols_mode(struct m5mols_info *info, u8 mode)
{
struct v4l2_subdev *sd = &info->sd;
int ret = -EINVAL;
- u32 reg;
+ u8 reg;
if (mode < REG_PARAMETER && mode > REG_CAPTURE)
return ret;
- ret = m5mols_read(sd, SYSTEM_SYSMODE, ®);
+ ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, ®);
if ((!ret && reg == mode) || ret)
return ret;
@@ -344,41 +386,37 @@
static int m5mols_get_version(struct v4l2_subdev *sd)
{
struct m5mols_info *info = to_m5mols(sd);
- union {
- struct m5mols_version ver;
- u8 bytes[VERSION_SIZE];
- } version;
- u32 *value;
- u8 cmd = CAT0_VER_CUSTOMER;
+ struct m5mols_version *ver = &info->ver;
+ u8 *str = ver->str;
+ int i;
int ret;
- do {
- value = (u32 *)&version.bytes[cmd];
- ret = m5mols_read(sd, SYSTEM_CMD(cmd), value);
- if (ret)
- return ret;
- } while (cmd++ != CAT0_VER_AWB);
-
- do {
- value = (u32 *)&version.bytes[cmd];
- ret = m5mols_read(sd, SYSTEM_VER_STRING, value);
- if (ret)
- return ret;
- if (cmd >= VERSION_SIZE - 1)
- return -EINVAL;
- } while (version.bytes[cmd++]);
-
- value = (u32 *)&version.bytes[cmd];
- ret = m5mols_read(sd, AF_VERSION, value);
+ ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer);
+ if (!ret)
+ ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project);
+ if (!ret)
+ ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw);
+ if (!ret)
+ ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw);
+ if (!ret)
+ ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param);
+ if (!ret)
+ ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb);
+ if (!ret)
+ ret = m5mols_read_u8(sd, AF_VERSION, &ver->af);
if (ret)
return ret;
- /* store version information swapped for being readable */
- info->ver = version.ver;
- info->ver.fw = be16_to_cpu(info->ver.fw);
- info->ver.hw = be16_to_cpu(info->ver.hw);
- info->ver.param = be16_to_cpu(info->ver.param);
- info->ver.awb = be16_to_cpu(info->ver.awb);
+ for (i = 0; i < VERSION_STRING_SIZE; i++) {
+ ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]);
+ if (ret)
+ return ret;
+ }
+
+ ver->fw = be16_to_cpu(ver->fw);
+ ver->hw = be16_to_cpu(ver->hw);
+ ver->param = be16_to_cpu(ver->param);
+ ver->awb = be16_to_cpu(ver->awb);
v4l2_info(sd, "Manufacturer\t[%s]\n",
is_manufacturer(info, REG_SAMSUNG_ELECTRO) ?
@@ -722,7 +760,7 @@
int ret;
/* Determine value's range & step of controls for various FW version */
- ret = m5mols_read(sd, AE_MAX_GAIN_MON, (u32 *)&max_exposure);
+ ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &max_exposure);
if (!ret)
step_zoom = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1;
if (ret)
@@ -842,18 +880,18 @@
struct m5mols_info *info =
container_of(work, struct m5mols_info, work_irq);
struct v4l2_subdev *sd = &info->sd;
- u32 reg;
+ u8 reg;
int ret;
if (!is_powered(info) ||
- m5mols_read(sd, SYSTEM_INT_FACTOR, &info->interrupt))
+ m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &info->interrupt))
return;
switch (info->interrupt & REG_INT_MASK) {
case REG_INT_AF:
if (!is_available_af(info))
break;
- ret = m5mols_read(sd, AF_STATUS, ®);
+ ret = m5mols_read_u8(sd, AF_STATUS, ®);
v4l2_dbg(2, m5mols_debug, sd, "AF %s\n",
reg == REG_AF_FAIL ? "Failed" :
reg == REG_AF_SUCCESS ? "Success" :
diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h
index b83e36f..c755bd6 100644
--- a/drivers/media/video/m5mols/m5mols_reg.h
+++ b/drivers/media/video/m5mols/m5mols_reg.h
@@ -2,10 +2,10 @@
* Register map for M-5MOLS 8M Pixel camera sensor with ISP
*
* Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
*
* Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -56,13 +56,24 @@
* more specific contents, see definition if file m5mols.h.
*/
#define CAT0_VER_CUSTOMER 0x00 /* customer version */
-#define CAT0_VER_AWB 0x09 /* Auto WB version */
+#define CAT0_VER_PROJECT 0x01 /* project version */
+#define CAT0_VER_FIRMWARE 0x02 /* Firmware version */
+#define CAT0_VER_HARDWARE 0x04 /* Hardware version */
+#define CAT0_VER_PARAMETER 0x06 /* Parameter version */
+#define CAT0_VER_AWB 0x08 /* Auto WB version */
#define CAT0_VER_STRING 0x0a /* string including M-5MOLS */
#define CAT0_SYSMODE 0x0b /* SYSTEM mode register */
#define CAT0_STATUS 0x0c /* SYSTEM mode status register */
#define CAT0_INT_FACTOR 0x10 /* interrupt pending register */
#define CAT0_INT_ENABLE 0x11 /* interrupt enable register */
+#define SYSTEM_VER_CUSTOMER I2C_REG(CAT_SYSTEM, CAT0_VER_CUSTOMER, 1)
+#define SYSTEM_VER_PROJECT I2C_REG(CAT_SYSTEM, CAT0_VER_PROJECT, 1)
+#define SYSTEM_VER_FIRMWARE I2C_REG(CAT_SYSTEM, CAT0_VER_FIRMWARE, 2)
+#define SYSTEM_VER_HARDWARE I2C_REG(CAT_SYSTEM, CAT0_VER_HARDWARE, 2)
+#define SYSTEM_VER_PARAMETER I2C_REG(CAT_SYSTEM, CAT0_VER_PARAMETER, 2)
+#define SYSTEM_VER_AWB I2C_REG(CAT_SYSTEM, CAT0_VER_AWB, 2)
+
#define SYSTEM_SYSMODE I2C_REG(CAT_SYSTEM, CAT0_SYSMODE, 1)
#define REG_SYSINIT 0x00 /* SYSTEM mode */
#define REG_PARAMETER 0x01 /* PARAMETER mode */
@@ -382,8 +393,8 @@
#define REG_CAP_START_MAIN 0x01
#define REG_CAP_START_THUMB 0x03
-#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 1)
-#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 1)
+#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 4)
+#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 4)
/*
* Category F - Flash
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index de5d481..c43c81f 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -480,12 +480,14 @@
struct msp_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (state->radio)
+ if (vt->type != V4L2_TUNER_ANALOG_TV)
return 0;
- if (state->opmode == OPMODE_AUTOSELECT)
- msp_detect_stereo(client);
- vt->audmode = state->audmode;
- vt->rxsubchans = state->rxsubchans;
+ if (!state->radio) {
+ if (state->opmode == OPMODE_AUTOSELECT)
+ msp_detect_stereo(client);
+ vt->rxsubchans = state->rxsubchans;
+ }
+ vt->audmode = state->audmode;
vt->capability |= V4L2_TUNER_CAP_STEREO |
V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
return 0;
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index bc0c23a..63f8a0c 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -444,12 +444,9 @@
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct mx1_camera_dev *pcdev = ici->priv;
- int ret;
- if (pcdev->icd) {
- ret = -EBUSY;
- goto ebusy;
- }
+ if (pcdev->icd)
+ return -EBUSY;
dev_info(icd->dev.parent, "MX1 Camera driver attached to camera %d\n",
icd->devnum);
@@ -458,8 +455,7 @@
pcdev->icd = icd;
-ebusy:
- return ret;
+ return 0;
}
static void mx1_camera_remove_device(struct soc_camera_device *icd)
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 4ada9be..4d07c58 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -982,6 +982,14 @@
startindex = (vout->vid == OMAP_VIDEO1) ?
video1_numbuffers : video2_numbuffers;
+ /* Check the size of the buffer */
+ if (*size > vout->buffer_size) {
+ v4l2_err(&vout->vid_dev->v4l2_dev,
+ "buffer allocation mismatch [%u] [%u]\n",
+ *size, vout->buffer_size);
+ return -ENOMEM;
+ }
+
for (i = startindex; i < *count; i++) {
vout->buffer_size = *size;
@@ -1228,6 +1236,14 @@
(vma->vm_pgoff << PAGE_SHIFT));
return -EINVAL;
}
+ /* Check the size of the buffer */
+ if (size > vout->buffer_size) {
+ v4l2_err(&vout->vid_dev->v4l2_dev,
+ "insufficient memory [%lu] [%u]\n",
+ size, vout->buffer_size);
+ return -ENOMEM;
+ }
+
q->bufs[i]->baddr = vma->vm_start;
vma->vm_flags |= VM_RESERVED;
@@ -2391,7 +2407,7 @@
/* Register the Video device with V4L2
*/
vfd = vout->vfd;
- if (video_register_device(vfd, VFL_TYPE_GRABBER, k + 1) < 0) {
+ if (video_register_device(vfd, VFL_TYPE_GRABBER, -1) < 0) {
dev_err(&pdev->dev, ": Could not register "
"Video for Linux device\n");
vfd->minor = -1;
diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/video/omap/omap_voutlib.c
index 2aa6a76..8ae7481 100644
--- a/drivers/media/video/omap/omap_voutlib.c
+++ b/drivers/media/video/omap/omap_voutlib.c
@@ -193,7 +193,7 @@
return -EINVAL;
if (cpu_is_omap24xx()) {
- if (crop->height != win->w.height) {
+ if (try_crop.height != win->w.height) {
/* If we're resizing vertically, we can't support a
* crop width wider than 768 pixels.
*/
@@ -202,7 +202,7 @@
}
}
/* vertical resizing */
- vresize = (1024 * crop->height) / win->w.height;
+ vresize = (1024 * try_crop.height) / win->w.height;
if (cpu_is_omap24xx() && (vresize > 2048))
vresize = 2048;
else if (cpu_is_omap34xx() && (vresize > 4096))
@@ -221,7 +221,7 @@
try_crop.height = 2;
}
/* horizontal resizing */
- hresize = (1024 * crop->width) / win->w.width;
+ hresize = (1024 * try_crop.width) / win->w.width;
if (cpu_is_omap24xx() && (hresize > 2048))
hresize = 2048;
else if (cpu_is_omap34xx() && (hresize > 4096))
diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index 472a693..94b6ed8 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -391,7 +391,7 @@
};
int i;
- dev_dbg(isp->dev, "");
+ dev_dbg(isp->dev, "ISP IRQ: ");
for (i = 0; i < ARRAY_SIZE(name); i++) {
if ((1 << i) & irqstatus)
@@ -1748,7 +1748,7 @@
goto done;
/* Register external entities */
- for (subdevs = pdata->subdevs; subdevs->subdevs; ++subdevs) {
+ for (subdevs = pdata->subdevs; subdevs && subdevs->subdevs; ++subdevs) {
struct v4l2_subdev *sensor;
struct media_entity *input;
unsigned int flags;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 9d0dd08..e98d382 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -3046,6 +3046,8 @@
if (hdw->input_dirty || hdw->audiomode_dirty || hdw->force_dirty) {
struct v4l2_tuner vt;
memset(&vt, 0, sizeof(vt));
+ vt.type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ?
+ V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
vt.audmode = hdw->audiomode_val;
v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, s_tuner, &vt);
}
@@ -5171,6 +5173,8 @@
{
struct v4l2_tuner *vtp = &hdw->tuner_signal_info;
memset(vtp, 0, sizeof(*vtp));
+ vtp->type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ?
+ V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
hdw->tuner_signal_stale = 0;
/* Note: There apparently is no replacement for VIDIOC_CROPCAP
using v4l2-subdev - therefore we can't support that AT ALL right
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 1593f8d..760b4de 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -1414,7 +1414,7 @@
{
ARG_DEF(struct pwc_probe, probe)
- strcpy(ARGR(probe).name, pdev->vdev->name);
+ strcpy(ARGR(probe).name, pdev->vdev.name);
ARGR(probe).type = pdev->type;
ARG_OUT(probe)
break;
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 356cd42..b0bde5a 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -40,7 +40,7 @@
Oh yes, convention: to disctinguish between all the various pointers to
device-structures, I use these names for the pointer variables:
udev: struct usb_device *
- vdev: struct video_device *
+ vdev: struct video_device (member of pwc_dev)
pdev: struct pwc_devive *
*/
@@ -152,6 +152,7 @@
size_t count, loff_t *ppos);
static unsigned int pwc_video_poll(struct file *file, poll_table *wait);
static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma);
+static void pwc_video_release(struct video_device *vfd);
static const struct v4l2_file_operations pwc_fops = {
.owner = THIS_MODULE,
@@ -164,42 +165,12 @@
};
static struct video_device pwc_template = {
.name = "Philips Webcam", /* Filled in later */
- .release = video_device_release,
+ .release = pwc_video_release,
.fops = &pwc_fops,
+ .ioctl_ops = &pwc_ioctl_ops,
};
/***************************************************************************/
-
-/* Okay, this is some magic that I worked out and the reasoning behind it...
-
- The biggest problem with any USB device is of course: "what to do
- when the user unplugs the device while it is in use by an application?"
- We have several options:
- 1) Curse them with the 7 plagues when they do (requires divine intervention)
- 2) Tell them not to (won't work: they'll do it anyway)
- 3) Oops the kernel (this will have a negative effect on a user's uptime)
- 4) Do something sensible.
-
- Of course, we go for option 4.
-
- It happens that this device will be linked to two times, once from
- usb_device and once from the video_device in their respective 'private'
- pointers. This is done when the device is probed() and all initialization
- succeeded. The pwc_device struct links back to both structures.
-
- When a device is unplugged while in use it will be removed from the
- list of known USB devices; I also de-register it as a V4L device, but
- unfortunately I can't free the memory since the struct is still in use
- by the file descriptor. This free-ing is then deferend until the first
- opportunity. Crude, but it works.
-
- A small 'advantage' is that if a user unplugs the cam and plugs it back
- in, it should get assigned the same video device minor, but unfortunately
- it's non-trivial to re-link the cam back to the video device... (that
- would surely be magic! :))
-*/
-
-/***************************************************************************/
/* Private functions */
/* Here we want the physical address of the memory.
@@ -1016,16 +987,15 @@
static DEVICE_ATTR(button, S_IRUGO | S_IWUSR, show_snapshot_button_status,
NULL);
-static int pwc_create_sysfs_files(struct video_device *vdev)
+static int pwc_create_sysfs_files(struct pwc_device *pdev)
{
- struct pwc_device *pdev = video_get_drvdata(vdev);
int rc;
- rc = device_create_file(&vdev->dev, &dev_attr_button);
+ rc = device_create_file(&pdev->vdev.dev, &dev_attr_button);
if (rc)
goto err;
if (pdev->features & FEATURE_MOTOR_PANTILT) {
- rc = device_create_file(&vdev->dev, &dev_attr_pan_tilt);
+ rc = device_create_file(&pdev->vdev.dev, &dev_attr_pan_tilt);
if (rc)
goto err_button;
}
@@ -1033,19 +1003,17 @@
return 0;
err_button:
- device_remove_file(&vdev->dev, &dev_attr_button);
+ device_remove_file(&pdev->vdev.dev, &dev_attr_button);
err:
PWC_ERROR("Could not create sysfs files.\n");
return rc;
}
-static void pwc_remove_sysfs_files(struct video_device *vdev)
+static void pwc_remove_sysfs_files(struct pwc_device *pdev)
{
- struct pwc_device *pdev = video_get_drvdata(vdev);
-
if (pdev->features & FEATURE_MOTOR_PANTILT)
- device_remove_file(&vdev->dev, &dev_attr_pan_tilt);
- device_remove_file(&vdev->dev, &dev_attr_button);
+ device_remove_file(&pdev->vdev.dev, &dev_attr_pan_tilt);
+ device_remove_file(&pdev->vdev.dev, &dev_attr_button);
}
#ifdef CONFIG_USB_PWC_DEBUG
@@ -1106,7 +1074,7 @@
if (ret >= 0)
{
PWC_DEBUG_OPEN("This %s camera is equipped with a %s (%d).\n",
- pdev->vdev->name,
+ pdev->vdev.name,
pwc_sensor_type_to_string(i), i);
}
}
@@ -1180,16 +1148,15 @@
return 0;
}
-
-static void pwc_cleanup(struct pwc_device *pdev)
+static void pwc_video_release(struct video_device *vfd)
{
- pwc_remove_sysfs_files(pdev->vdev);
- video_unregister_device(pdev->vdev);
+ struct pwc_device *pdev = container_of(vfd, struct pwc_device, vdev);
+ int hint;
-#ifdef CONFIG_USB_PWC_INPUT_EVDEV
- if (pdev->button_dev)
- input_unregister_device(pdev->button_dev);
-#endif
+ /* search device_hint[] table if we occupy a slot, by any chance */
+ for (hint = 0; hint < MAX_DEV_HINTS; hint++)
+ if (device_hint[hint].pdev == pdev)
+ device_hint[hint].pdev = NULL;
kfree(pdev);
}
@@ -1199,7 +1166,7 @@
{
struct video_device *vdev = file->private_data;
struct pwc_device *pdev;
- int i, hint;
+ int i;
PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev);
@@ -1234,12 +1201,6 @@
}
pdev->vopen--;
PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen);
- } else {
- pwc_cleanup(pdev);
- /* search device_hint[] table if we occupy a slot, by any chance */
- for (hint = 0; hint < MAX_DEV_HINTS; hint++)
- if (device_hint[hint].pdev == pdev)
- device_hint[hint].pdev = NULL;
}
return 0;
@@ -1715,19 +1676,12 @@
init_waitqueue_head(&pdev->frameq);
pdev->vcompression = pwc_preferred_compression;
- /* Allocate video_device structure */
- pdev->vdev = video_device_alloc();
- if (!pdev->vdev) {
- PWC_ERROR("Err, cannot allocate video_device struture. Failing probe.");
- rc = -ENOMEM;
- goto err_free_mem;
- }
- memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template));
- pdev->vdev->parent = &intf->dev;
- pdev->vdev->lock = &pdev->modlock;
- pdev->vdev->ioctl_ops = &pwc_ioctl_ops;
- strcpy(pdev->vdev->name, name);
- video_set_drvdata(pdev->vdev, pdev);
+ /* Init video_device structure */
+ memcpy(&pdev->vdev, &pwc_template, sizeof(pwc_template));
+ pdev->vdev.parent = &intf->dev;
+ pdev->vdev.lock = &pdev->modlock;
+ strcpy(pdev->vdev.name, name);
+ video_set_drvdata(&pdev->vdev, pdev);
pdev->release = le16_to_cpu(udev->descriptor.bcdDevice);
PWC_DEBUG_PROBE("Release: %04x\n", pdev->release);
@@ -1746,8 +1700,6 @@
}
}
- pdev->vdev->release = video_device_release;
-
/* occupy slot */
if (hint < MAX_DEV_HINTS)
device_hint[hint].pdev = pdev;
@@ -1759,16 +1711,16 @@
pwc_set_leds(pdev, 0, 0);
pwc_camera_power(pdev, 0);
- rc = video_register_device(pdev->vdev, VFL_TYPE_GRABBER, video_nr);
+ rc = video_register_device(&pdev->vdev, VFL_TYPE_GRABBER, video_nr);
if (rc < 0) {
PWC_ERROR("Failed to register as video device (%d).\n", rc);
- goto err_video_release;
+ goto err_free_mem;
}
- rc = pwc_create_sysfs_files(pdev->vdev);
+ rc = pwc_create_sysfs_files(pdev);
if (rc)
goto err_video_unreg;
- PWC_INFO("Registered as %s.\n", video_device_node_name(pdev->vdev));
+ PWC_INFO("Registered as %s.\n", video_device_node_name(&pdev->vdev));
#ifdef CONFIG_USB_PWC_INPUT_EVDEV
/* register webcam snapshot button input device */
@@ -1776,7 +1728,7 @@
if (!pdev->button_dev) {
PWC_ERROR("Err, insufficient memory for webcam snapshot button device.");
rc = -ENOMEM;
- pwc_remove_sysfs_files(pdev->vdev);
+ pwc_remove_sysfs_files(pdev);
goto err_video_unreg;
}
@@ -1794,7 +1746,7 @@
if (rc) {
input_free_device(pdev->button_dev);
pdev->button_dev = NULL;
- pwc_remove_sysfs_files(pdev->vdev);
+ pwc_remove_sysfs_files(pdev);
goto err_video_unreg;
}
#endif
@@ -1804,10 +1756,7 @@
err_video_unreg:
if (hint < MAX_DEV_HINTS)
device_hint[hint].pdev = NULL;
- video_unregister_device(pdev->vdev);
- pdev->vdev = NULL; /* So we don't try to release it below */
-err_video_release:
- video_device_release(pdev->vdev);
+ video_unregister_device(&pdev->vdev);
err_free_mem:
kfree(pdev);
return rc;
@@ -1816,10 +1765,8 @@
/* The user yanked out the cable... */
static void usb_pwc_disconnect(struct usb_interface *intf)
{
- struct pwc_device *pdev;
- int hint;
+ struct pwc_device *pdev = usb_get_intfdata(intf);
- pdev = usb_get_intfdata (intf);
mutex_lock(&pdev->modlock);
usb_set_intfdata (intf, NULL);
if (pdev == NULL) {
@@ -1836,30 +1783,25 @@
}
/* We got unplugged; this is signalled by an EPIPE error code */
- if (pdev->vopen) {
- PWC_INFO("Disconnected while webcam is in use!\n");
- pdev->error_status = EPIPE;
- }
+ pdev->error_status = EPIPE;
+ pdev->unplugged = 1;
/* Alert waiting processes */
wake_up_interruptible(&pdev->frameq);
- /* Wait until device is closed */
- if (pdev->vopen) {
- pdev->unplugged = 1;
- pwc_iso_stop(pdev);
- } else {
- /* Device is closed, so we can safely unregister it */
- PWC_DEBUG_PROBE("Unregistering video device in disconnect().\n");
+
+ /* No need to keep the urbs around after disconnection */
+ pwc_isoc_cleanup(pdev);
disconnect_out:
- /* search device_hint[] table if we occupy a slot, by any chance */
- for (hint = 0; hint < MAX_DEV_HINTS; hint++)
- if (device_hint[hint].pdev == pdev)
- device_hint[hint].pdev = NULL;
- }
-
mutex_unlock(&pdev->modlock);
- pwc_cleanup(pdev);
+
+ pwc_remove_sysfs_files(pdev);
+ video_unregister_device(&pdev->vdev);
+
+#ifdef CONFIG_USB_PWC_INPUT_EVDEV
+ if (pdev->button_dev)
+ input_unregister_device(pdev->button_dev);
+#endif
}
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index e947766..083f8b1 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -162,9 +162,9 @@
struct pwc_device
{
- struct video_device *vdev;
+ struct video_device vdev;
- /* Pointer to our usb_device */
+ /* Pointer to our usb_device, may be NULL after unplug */
struct usb_device *udev;
int type; /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index d142b40..81b4a82 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -1,7 +1,7 @@
/*
- * Samsung S5P SoC series camera interface (camera capture) driver
+ * Samsung S5P/EXYNOS4 SoC series camera interface (camera capture) driver
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd
+ * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd.
* Author: Sylwester Nawrocki, <s.nawrocki@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
@@ -262,12 +262,7 @@
{
if (!fr || plane >= fr->fmt->memplanes)
return 0;
-
- dbg("%s: w: %d. h: %d. depth[%d]: %d",
- __func__, fr->width, fr->height, plane, fr->fmt->depth[plane]);
-
return fr->f_width * fr->f_height * fr->fmt->depth[plane] / 8;
-
}
static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
@@ -283,24 +278,14 @@
*num_planes = fmt->memplanes;
- dbg("%s, buffer count=%d, plane count=%d",
- __func__, *num_buffers, *num_planes);
-
for (i = 0; i < fmt->memplanes; i++) {
sizes[i] = get_plane_size(&ctx->d_frame, i);
- dbg("plane: %u, plane_size: %lu", i, sizes[i]);
allocators[i] = ctx->fimc_dev->alloc_ctx;
}
return 0;
}
-static int buffer_init(struct vb2_buffer *vb)
-{
- /* TODO: */
- return 0;
-}
-
static int buffer_prepare(struct vb2_buffer *vb)
{
struct vb2_queue *vq = vb->vb2_queue;
@@ -380,7 +365,6 @@
.queue_setup = queue_setup,
.buf_prepare = buffer_prepare,
.buf_queue = buffer_queue,
- .buf_init = buffer_init,
.wait_prepare = fimc_unlock,
.wait_finish = fimc_lock,
.start_streaming = start_streaming,
@@ -903,6 +887,7 @@
err_v4l2_reg:
v4l2_device_unregister(v4l2_dev);
err_info:
+ kfree(ctx);
dev_err(&fimc->pdev->dev, "failed to install\n");
return ret;
}
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index dc91a85..bdf19ad 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -1,9 +1,8 @@
/*
- * S5P camera interface (video postprocessor) driver
+ * Samsung S5P/EXYNOS4 SoC series camera interface (video postprocessor) driver
*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd
- *
- * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
+ * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published
@@ -42,7 +41,6 @@
.color = S5P_FIMC_RGB565,
.memplanes = 1,
.colplanes = 1,
- .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_BE,
.flags = FMT_FLAGS_M2M,
}, {
.name = "BGR666",
@@ -232,11 +230,7 @@
return 0;
}
}
-
*shift = 0, *ratio = 1;
-
- dbg("s: %d, t: %d, shift: %d, ratio: %d",
- src, tar, *shift, *ratio);
return 0;
}
@@ -268,10 +262,8 @@
err("invalid source size: %d x %d", sx, sy);
return -EINVAL;
}
-
sc->real_width = sx;
sc->real_height = sy;
- dbg("sx= %d, sy= %d, tx= %d, ty= %d", sx, sy, tx, ty);
ret = fimc_get_scaler_factor(sx, tx, &sc->pre_hratio, &sc->hfactor);
if (ret)
@@ -711,22 +703,18 @@
f = ctx_get_frame(ctx, vq->type);
if (IS_ERR(f))
return PTR_ERR(f);
-
/*
* Return number of non-contigous planes (plane buffers)
* depending on the configured color format.
*/
- if (f->fmt)
- *num_planes = f->fmt->memplanes;
+ if (!f->fmt)
+ return -EINVAL;
+ *num_planes = f->fmt->memplanes;
for (i = 0; i < f->fmt->memplanes; i++) {
- sizes[i] = (f->width * f->height * f->fmt->depth[i]) >> 3;
+ sizes[i] = (f->f_width * f->f_height * f->fmt->depth[i]) / 8;
allocators[i] = ctx->fimc_dev->alloc_ctx;
}
-
- if (*num_buffers == 0)
- *num_buffers = 1;
-
return 0;
}
@@ -852,7 +840,7 @@
for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) {
fmt = &fimc_formats[i];
- if (fmt->fourcc == f->fmt.pix.pixelformat &&
+ if (fmt->fourcc == f->fmt.pix_mp.pixelformat &&
(fmt->flags & mask))
break;
}
diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
index 3beb1e5..1f70772 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.h
+++ b/drivers/media/video/s5p-fimc/fimc-core.h
@@ -1,7 +1,5 @@
/*
- * Copyright (c) 2010 Samsung Electronics
- *
- * Sylwester Nawrocki, <s.nawrocki@samsung.com>
+ * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -135,9 +133,10 @@
* @name: format description
* @fourcc: the fourcc code for this format, 0 if not applicable
* @color: the corresponding fimc_color_fmt
- * @depth: per plane driver's private 'number of bits per pixel'
* @memplanes: number of physically non-contiguous data planes
* @colplanes: number of physically contiguous data planes
+ * @depth: per plane driver's private 'number of bits per pixel'
+ * @flags: flags indicating which operation mode format applies to
*/
struct fimc_fmt {
enum v4l2_mbus_pixelcode mbus_code;
@@ -171,7 +170,7 @@
};
/**
- * struct fimc_effect - the configuration data for the "Arbitrary" image effect
+ * struct fimc_effect - color effect information
* @type: effect type
* @pat_cb: cr value when type is "arbitrary"
* @pat_cr: cr value when type is "arbitrary"
@@ -184,7 +183,6 @@
/**
* struct fimc_scaler - the configuration data for FIMC inetrnal scaler
- *
* @scaleup_h: flag indicating scaling up horizontally
* @scaleup_v: flag indicating scaling up vertically
* @copy_mode: flag indicating transparent DMA transfer (no scaling
@@ -220,7 +218,6 @@
/**
* struct fimc_addr - the FIMC physical address set for DMA
- *
* @y: luminance plane physical address
* @cb: Cb plane physical address
* @cr: Cr plane physical address
@@ -234,6 +231,7 @@
/**
* struct fimc_vid_buffer - the driver's video buffer
* @vb: v4l videobuf buffer
+ * @list: linked list structure for buffer queue
* @paddr: precalculated physical address set
* @index: buffer index for the output DMA engine
*/
@@ -254,11 +252,10 @@
* @offs_v: image vertical pixel offset
* @width: image pixel width
* @height: image pixel weight
- * @paddr: image frame buffer physical addresses
- * @buf_cnt: number of buffers depending on a color format
* @payload: image size in bytes (w x h x bpp)
- * @color: color format
+ * @paddr: image frame buffer physical addresses
* @dma_offset: DMA offset in bytes
+ * @fmt: fimc color format pointer
*/
struct fimc_frame {
u32 f_width;
@@ -390,21 +387,22 @@
/**
* struct fimc_dev - abstraction for FIMC entity
- *
* @slock: the spinlock protecting this data structure
* @lock: the mutex protecting this data structure
* @pdev: pointer to the FIMC platform device
* @pdata: pointer to the device platform data
+ * @variant: the IP variant information
* @id: FIMC device index (0..FIMC_MAX_DEVS)
* @num_clocks: the number of clocks managed by this device instance
- * @clock[]: the clocks required for FIMC operation
+ * @clock: clocks required for FIMC operation
* @regs: the mapped hardware registers
* @regs_res: the resource claimed for IO registers
- * @irq: interrupt number of the FIMC subdevice
- * @irq_queue:
+ * @irq: FIMC interrupt number
+ * @irq_queue: interrupt handler waitqueue
* @m2m: memory-to-memory V4L2 device information
* @vid_cap: camera capture device information
* @state: flags used to synchronize m2m and capture mode operation
+ * @alloc_ctx: videobuf2 memory allocator context
*/
struct fimc_dev {
spinlock_t slock;
@@ -427,8 +425,7 @@
/**
* fimc_ctx - the device context data
- *
- * @lock: mutex protecting this data structure
+ * @slock: spinlock protecting this data structure
* @s_frame: source frame properties
* @d_frame: destination frame properties
* @out_order_1p: output 1-plane YCBCR order
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index ff6c0e9..d4ee24b 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -963,7 +963,7 @@
* to work with other protocols.
*/
if (!ir->active) {
- timeout = jiffies + jiffies_to_msecs(15);
+ timeout = jiffies + msecs_to_jiffies(15);
mod_timer(&ir->timer, timeout);
ir->active = true;
}
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 3988643..4e4d412 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -1512,7 +1512,7 @@
*/
static int soc_camera_video_start(struct soc_camera_device *icd)
{
- struct device_type *type = icd->vdev->dev.type;
+ const struct device_type *type = icd->vdev->dev.type;
int ret;
if (!icd->dev.parent)
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 9363ed9..a03945a 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -714,29 +714,34 @@
* returns 0.
* This function is needed for boards that have a separate tuner for
* radio (like devices with tea5767).
+ * NOTE: mt20xx uses V4L2_TUNER_DIGITAL_TV and calls set_tv_freq to
+ * select a TV frequency. So, t_mode = T_ANALOG_TV could actually
+ * be used to represent a Digital TV too.
*/
static inline int check_mode(struct tuner *t, enum v4l2_tuner_type mode)
{
- if ((1 << mode & t->mode_mask) == 0)
+ int t_mode;
+ if (mode == V4L2_TUNER_RADIO)
+ t_mode = T_RADIO;
+ else
+ t_mode = T_ANALOG_TV;
+
+ if ((t_mode & t->mode_mask) == 0)
return -EINVAL;
return 0;
}
/**
- * set_mode_freq - Switch tuner to other mode.
- * @client: struct i2c_client pointer
+ * set_mode - Switch tuner to other mode.
* @t: a pointer to the module's internal struct_tuner
* @mode: enum v4l2_type (radio or TV)
- * @freq: frequency to set (0 means to use the previous one)
*
* If tuner doesn't support the needed mode (radio or TV), prints a
* debug message and returns -EINVAL, changing its state to standby.
- * Otherwise, changes the state and sets frequency to the last value, if
- * the tuner can sleep or if it supports both Radio and TV.
+ * Otherwise, changes the mode and returns 0.
*/
-static int set_mode_freq(struct i2c_client *client, struct tuner *t,
- enum v4l2_tuner_type mode, unsigned int freq)
+static int set_mode(struct tuner *t, enum v4l2_tuner_type mode)
{
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
@@ -752,19 +757,29 @@
t->mode = mode;
tuner_dbg("Changing to mode %d\n", mode);
}
- if (t->mode == V4L2_TUNER_RADIO) {
- if (freq)
- t->radio_freq = freq;
- set_radio_freq(client, t->radio_freq);
- } else {
- if (freq)
- t->tv_freq = freq;
- set_tv_freq(client, t->tv_freq);
- }
-
return 0;
}
+/**
+ * set_freq - Set the tuner to the desired frequency.
+ * @t: a pointer to the module's internal struct_tuner
+ * @freq: frequency to set (0 means to use the current frequency)
+ */
+static void set_freq(struct tuner *t, unsigned int freq)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&t->sd);
+
+ if (t->mode == V4L2_TUNER_RADIO) {
+ if (!freq)
+ freq = t->radio_freq;
+ set_radio_freq(client, freq);
+ } else {
+ if (!freq)
+ freq = t->tv_freq;
+ set_tv_freq(client, freq);
+ }
+}
+
/*
* Functions that are specific for TV mode
*/
@@ -817,7 +832,8 @@
/**
* tuner_fixup_std - force a given video standard variant
*
- * @t: tuner internal struct
+ * @t: tuner internal struct
+ * @std: TV standard
*
* A few devices or drivers have problem to detect some standard variations.
* On other operational systems, the drivers generally have a per-country
@@ -827,57 +843,39 @@
* to distinguish all video standard variations, a modprobe parameter can
* be used to force a video standard match.
*/
-static int tuner_fixup_std(struct tuner *t)
+static v4l2_std_id tuner_fixup_std(struct tuner *t, v4l2_std_id std)
{
- if ((t->std & V4L2_STD_PAL) == V4L2_STD_PAL) {
+ if (pal[0] != '-' && (std & V4L2_STD_PAL) == V4L2_STD_PAL) {
switch (pal[0]) {
case '6':
- tuner_dbg("insmod fixup: PAL => PAL-60\n");
- t->std = V4L2_STD_PAL_60;
- break;
+ return V4L2_STD_PAL_60;
case 'b':
case 'B':
case 'g':
case 'G':
- tuner_dbg("insmod fixup: PAL => PAL-BG\n");
- t->std = V4L2_STD_PAL_BG;
- break;
+ return V4L2_STD_PAL_BG;
case 'i':
case 'I':
- tuner_dbg("insmod fixup: PAL => PAL-I\n");
- t->std = V4L2_STD_PAL_I;
- break;
+ return V4L2_STD_PAL_I;
case 'd':
case 'D':
case 'k':
case 'K':
- tuner_dbg("insmod fixup: PAL => PAL-DK\n");
- t->std = V4L2_STD_PAL_DK;
- break;
+ return V4L2_STD_PAL_DK;
case 'M':
case 'm':
- tuner_dbg("insmod fixup: PAL => PAL-M\n");
- t->std = V4L2_STD_PAL_M;
- break;
+ return V4L2_STD_PAL_M;
case 'N':
case 'n':
- if (pal[1] == 'c' || pal[1] == 'C') {
- tuner_dbg("insmod fixup: PAL => PAL-Nc\n");
- t->std = V4L2_STD_PAL_Nc;
- } else {
- tuner_dbg("insmod fixup: PAL => PAL-N\n");
- t->std = V4L2_STD_PAL_N;
- }
- break;
- case '-':
- /* default parameter, do nothing */
- break;
+ if (pal[1] == 'c' || pal[1] == 'C')
+ return V4L2_STD_PAL_Nc;
+ return V4L2_STD_PAL_N;
default:
tuner_warn("pal= argument not recognised\n");
break;
}
}
- if ((t->std & V4L2_STD_SECAM) == V4L2_STD_SECAM) {
+ if (secam[0] != '-' && (std & V4L2_STD_SECAM) == V4L2_STD_SECAM) {
switch (secam[0]) {
case 'b':
case 'B':
@@ -885,63 +883,42 @@
case 'G':
case 'h':
case 'H':
- tuner_dbg("insmod fixup: SECAM => SECAM-BGH\n");
- t->std = V4L2_STD_SECAM_B |
- V4L2_STD_SECAM_G |
- V4L2_STD_SECAM_H;
- break;
+ return V4L2_STD_SECAM_B |
+ V4L2_STD_SECAM_G |
+ V4L2_STD_SECAM_H;
case 'd':
case 'D':
case 'k':
case 'K':
- tuner_dbg("insmod fixup: SECAM => SECAM-DK\n");
- t->std = V4L2_STD_SECAM_DK;
- break;
+ return V4L2_STD_SECAM_DK;
case 'l':
case 'L':
- if ((secam[1] == 'C') || (secam[1] == 'c')) {
- tuner_dbg("insmod fixup: SECAM => SECAM-L'\n");
- t->std = V4L2_STD_SECAM_LC;
- } else {
- tuner_dbg("insmod fixup: SECAM => SECAM-L\n");
- t->std = V4L2_STD_SECAM_L;
- }
- break;
- case '-':
- /* default parameter, do nothing */
- break;
+ if ((secam[1] == 'C') || (secam[1] == 'c'))
+ return V4L2_STD_SECAM_LC;
+ return V4L2_STD_SECAM_L;
default:
tuner_warn("secam= argument not recognised\n");
break;
}
}
- if ((t->std & V4L2_STD_NTSC) == V4L2_STD_NTSC) {
+ if (ntsc[0] != '-' && (std & V4L2_STD_NTSC) == V4L2_STD_NTSC) {
switch (ntsc[0]) {
case 'm':
case 'M':
- tuner_dbg("insmod fixup: NTSC => NTSC-M\n");
- t->std = V4L2_STD_NTSC_M;
- break;
+ return V4L2_STD_NTSC_M;
case 'j':
case 'J':
- tuner_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
- t->std = V4L2_STD_NTSC_M_JP;
- break;
+ return V4L2_STD_NTSC_M_JP;
case 'k':
case 'K':
- tuner_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
- t->std = V4L2_STD_NTSC_M_KR;
- break;
- case '-':
- /* default parameter, do nothing */
- break;
+ return V4L2_STD_NTSC_M_KR;
default:
tuner_info("ntsc= argument not recognised\n");
break;
}
}
- return 0;
+ return std;
}
/*
@@ -1016,7 +993,7 @@
case V4L2_TUNER_RADIO:
p = "radio";
break;
- case V4L2_TUNER_DIGITAL_TV:
+ case V4L2_TUNER_DIGITAL_TV: /* Used by mt20xx */
p = "digital TV";
break;
case V4L2_TUNER_ANALOG_TV:
@@ -1058,10 +1035,9 @@
static int tuner_s_radio(struct v4l2_subdev *sd)
{
struct tuner *t = to_tuner(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (set_mode_freq(client, t, V4L2_TUNER_RADIO, 0) == -EINVAL)
- return 0;
+ if (set_mode(t, V4L2_TUNER_RADIO) == 0)
+ set_freq(t, 0);
return 0;
}
@@ -1072,16 +1048,20 @@
/**
* tuner_s_power - controls the power state of the tuner
* @sd: pointer to struct v4l2_subdev
- * @on: a zero value puts the tuner to sleep
+ * @on: a zero value puts the tuner to sleep, non-zero wakes it up
*/
static int tuner_s_power(struct v4l2_subdev *sd, int on)
{
struct tuner *t = to_tuner(sd);
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
- /* FIXME: Why this function don't wake the tuner if on != 0 ? */
- if (on)
+ if (on) {
+ if (t->standby && set_mode(t, t->mode) == 0) {
+ tuner_dbg("Waking up tuner\n");
+ set_freq(t, 0);
+ }
return 0;
+ }
tuner_dbg("Putting tuner to sleep\n");
t->standby = true;
@@ -1093,28 +1073,36 @@
static int tuner_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct tuner *t = to_tuner(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (set_mode_freq(client, t, V4L2_TUNER_ANALOG_TV, 0) == -EINVAL)
+ if (set_mode(t, V4L2_TUNER_ANALOG_TV))
return 0;
- t->std = std;
- tuner_fixup_std(t);
-
+ t->std = tuner_fixup_std(t, std);
+ if (t->std != std)
+ tuner_dbg("Fixup standard %llx to %llx\n", std, t->std);
+ set_freq(t, 0);
return 0;
}
static int tuner_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
{
struct tuner *t = to_tuner(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (set_mode_freq(client, t, f->type, f->frequency) == -EINVAL)
- return 0;
-
+ if (set_mode(t, f->type) == 0)
+ set_freq(t, f->frequency);
return 0;
}
+/**
+ * tuner_g_frequency - Get the tuned frequency for the tuner
+ * @sd: pointer to struct v4l2_subdev
+ * @f: pointer to struct v4l2_frequency
+ *
+ * At return, the structure f will be filled with tuner frequency
+ * if the tuner matches the f->type.
+ * Note: f->type should be initialized before calling it.
+ * This is done by either video_ioctl2 or by the bridge driver.
+ */
static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
{
struct tuner *t = to_tuner(sd);
@@ -1122,8 +1110,7 @@
if (check_mode(t, f->type) == -EINVAL)
return 0;
- f->type = t->mode;
- if (fe_tuner_ops->get_frequency && !t->standby) {
+ if (f->type == t->mode && fe_tuner_ops->get_frequency && !t->standby) {
u32 abs_freq;
fe_tuner_ops->get_frequency(&t->fe, &abs_freq);
@@ -1131,12 +1118,22 @@
DIV_ROUND_CLOSEST(abs_freq * 2, 125) :
DIV_ROUND_CLOSEST(abs_freq, 62500);
} else {
- f->frequency = (V4L2_TUNER_RADIO == t->mode) ?
+ f->frequency = (V4L2_TUNER_RADIO == f->type) ?
t->radio_freq : t->tv_freq;
}
return 0;
}
+/**
+ * tuner_g_tuner - Fill in tuner information
+ * @sd: pointer to struct v4l2_subdev
+ * @vt: pointer to struct v4l2_tuner
+ *
+ * At return, the structure vt will be filled with tuner information
+ * if the tuner matches vt->type.
+ * Note: vt->type should be initialized before calling it.
+ * This is done by either video_ioctl2 or by the bridge driver.
+ */
static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
{
struct tuner *t = to_tuner(sd);
@@ -1145,48 +1142,57 @@
if (check_mode(t, vt->type) == -EINVAL)
return 0;
- vt->type = t->mode;
- if (analog_ops->get_afc)
+ if (vt->type == t->mode && analog_ops->get_afc)
vt->afc = analog_ops->get_afc(&t->fe);
- if (t->mode == V4L2_TUNER_ANALOG_TV)
- vt->capability |= V4L2_TUNER_CAP_NORM;
if (t->mode != V4L2_TUNER_RADIO) {
+ vt->capability |= V4L2_TUNER_CAP_NORM;
vt->rangelow = tv_range[0] * 16;
vt->rangehigh = tv_range[1] * 16;
return 0;
}
/* radio mode */
- vt->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
- if (fe_tuner_ops->get_status) {
- u32 tuner_status;
+ if (vt->type == t->mode) {
+ vt->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
+ if (fe_tuner_ops->get_status) {
+ u32 tuner_status;
- fe_tuner_ops->get_status(&t->fe, &tuner_status);
- vt->rxsubchans =
- (tuner_status & TUNER_STATUS_STEREO) ?
- V4L2_TUNER_SUB_STEREO :
- V4L2_TUNER_SUB_MONO;
+ fe_tuner_ops->get_status(&t->fe, &tuner_status);
+ vt->rxsubchans =
+ (tuner_status & TUNER_STATUS_STEREO) ?
+ V4L2_TUNER_SUB_STEREO :
+ V4L2_TUNER_SUB_MONO;
+ }
+ if (analog_ops->has_signal)
+ vt->signal = analog_ops->has_signal(&t->fe);
+ vt->audmode = t->audmode;
}
- if (analog_ops->has_signal)
- vt->signal = analog_ops->has_signal(&t->fe);
vt->capability |= V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
- vt->audmode = t->audmode;
vt->rangelow = radio_range[0] * 16000;
vt->rangehigh = radio_range[1] * 16000;
return 0;
}
+/**
+ * tuner_s_tuner - Set the tuner's audio mode
+ * @sd: pointer to struct v4l2_subdev
+ * @vt: pointer to struct v4l2_tuner
+ *
+ * Sets the audio mode if the tuner matches vt->type.
+ * Note: vt->type should be initialized before calling it.
+ * This is done by either video_ioctl2 or by the bridge driver.
+ */
static int tuner_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
{
struct tuner *t = to_tuner(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (set_mode_freq(client, t, vt->type, 0) == -EINVAL)
+ if (set_mode(t, vt->type))
return 0;
if (t->mode == V4L2_TUNER_RADIO)
t->audmode = vt->audmode;
+ set_freq(t, 0);
return 0;
}
@@ -1221,7 +1227,8 @@
tuner_dbg("resume\n");
if (!t->standby)
- set_mode_freq(c, t, t->type, 0);
+ if (set_mode(t, t->mode) == 0)
+ set_freq(t, 0);
return 0;
}
diff --git a/drivers/media/video/uvc/uvc_entity.c b/drivers/media/video/uvc/uvc_entity.c
index ede7852..48fea37 100644
--- a/drivers/media/video/uvc/uvc_entity.c
+++ b/drivers/media/video/uvc/uvc_entity.c
@@ -27,14 +27,20 @@
struct uvc_entity *entity)
{
const u32 flags = MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE;
- struct uvc_entity *remote;
+ struct media_entity *sink;
unsigned int i;
- u8 remote_pad;
int ret;
+ sink = (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING)
+ ? (entity->vdev ? &entity->vdev->entity : NULL)
+ : &entity->subdev.entity;
+ if (sink == NULL)
+ return 0;
+
for (i = 0; i < entity->num_pads; ++i) {
struct media_entity *source;
- struct media_entity *sink;
+ struct uvc_entity *remote;
+ u8 remote_pad;
if (!(entity->pads[i].flags & MEDIA_PAD_FL_SINK))
continue;
@@ -43,10 +49,11 @@
if (remote == NULL)
return -EINVAL;
- source = (UVC_ENTITY_TYPE(remote) == UVC_TT_STREAMING)
- ? &remote->vdev->entity : &remote->subdev.entity;
- sink = (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING)
- ? &entity->vdev->entity : &entity->subdev.entity;
+ source = (UVC_ENTITY_TYPE(remote) != UVC_TT_STREAMING)
+ ? (remote->vdev ? &remote->vdev->entity : NULL)
+ : &remote->subdev.entity;
+ if (source == NULL)
+ continue;
remote_pad = remote->num_pads - 1;
ret = media_entity_create_link(source, remote_pad,
@@ -55,11 +62,10 @@
return ret;
}
- if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING)
- ret = v4l2_device_register_subdev(&chain->dev->vdev,
- &entity->subdev);
+ if (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING)
+ return 0;
- return ret;
+ return v4l2_device_register_subdev(&chain->dev->vdev, &entity->subdev);
}
static struct v4l2_subdev_ops uvc_subdev_ops = {
@@ -84,9 +90,11 @@
ret = media_entity_init(&entity->subdev.entity,
entity->num_pads, entity->pads, 0);
- } else
+ } else if (entity->vdev != NULL) {
ret = media_entity_init(&entity->vdev->entity,
entity->num_pads, entity->pads, 0);
+ } else
+ ret = 0;
return ret;
}
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index 109a063..f90ce9f 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -104,6 +104,8 @@
}
if (queue->count) {
+ uvc_queue_cancel(queue, 0);
+ INIT_LIST_HEAD(&queue->mainqueue);
vfree(queue->mem);
queue->count = 0;
}
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index fc766b9..4999479 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -1255,8 +1255,10 @@
/* Commit the streaming parameters. */
ret = uvc_commit_video(stream, &stream->ctrl);
- if (ret < 0)
+ if (ret < 0) {
+ uvc_queue_enable(&stream->queue, 0);
return ret;
+ }
return uvc_init_video(stream, GFP_KERNEL);
}
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 19d5ae2..06f1400 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -167,6 +167,12 @@
mutex_unlock(&videodev_lock);
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
+ vdev->vfl_type != VFL_TYPE_SUBDEV)
+ media_device_unregister_entity(&vdev->entity);
+#endif
+
/* Release video_device and perform other
cleanups as needed. */
vdev->release(vdev);
@@ -389,9 +395,6 @@
static int v4l2_open(struct inode *inode, struct file *filp)
{
struct video_device *vdev;
-#if defined(CONFIG_MEDIA_CONTROLLER)
- struct media_entity *entity = NULL;
-#endif
int ret = 0;
/* Check if the video device is available */
@@ -405,17 +408,6 @@
/* and increase the device refcount */
video_get(vdev);
mutex_unlock(&videodev_lock);
-#if defined(CONFIG_MEDIA_CONTROLLER)
- if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
- vdev->vfl_type != VFL_TYPE_SUBDEV) {
- entity = media_entity_get(&vdev->entity);
- if (!entity) {
- ret = -EBUSY;
- video_put(vdev);
- return ret;
- }
- }
-#endif
if (vdev->fops->open) {
if (vdev->lock && mutex_lock_interruptible(vdev->lock)) {
ret = -ERESTARTSYS;
@@ -431,14 +423,8 @@
err:
/* decrease the refcount in case of an error */
- if (ret) {
-#if defined(CONFIG_MEDIA_CONTROLLER)
- if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
- vdev->vfl_type != VFL_TYPE_SUBDEV)
- media_entity_put(entity);
-#endif
+ if (ret)
video_put(vdev);
- }
return ret;
}
@@ -455,11 +441,6 @@
if (vdev->lock)
mutex_unlock(vdev->lock);
}
-#if defined(CONFIG_MEDIA_CONTROLLER)
- if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
- vdev->vfl_type != VFL_TYPE_SUBDEV)
- media_entity_put(&vdev->entity);
-#endif
/* decrease the refcount unconditionally since the release()
return value is ignored. */
video_put(vdev);
@@ -754,12 +735,6 @@
if (!vdev || !video_is_registered(vdev))
return;
-#if defined(CONFIG_MEDIA_CONTROLLER)
- if (vdev->v4l2_dev && vdev->v4l2_dev->mdev &&
- vdev->vfl_type != VFL_TYPE_SUBDEV)
- media_device_unregister_entity(&vdev->entity);
-#endif
-
mutex_lock(&videodev_lock);
/* This must be in a critical section to prevent a race with v4l2_open.
* Once this bit has been cleared video_get may never be called again.
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 506edcc2..69e8c6f 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -1822,6 +1822,8 @@
if (!ops->vidioc_g_tuner)
break;
+ p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
+ V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
ret = ops->vidioc_g_tuner(file, fh, p);
if (!ret)
dbgarg(cmd, "index=%d, name=%s, type=%d, "
@@ -1840,6 +1842,8 @@
if (!ops->vidioc_s_tuner)
break;
+ p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
+ V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
dbgarg(cmd, "index=%d, name=%s, type=%d, "
"capability=0x%x, rangelow=%d, "
"rangehigh=%d, signal=%d, afc=%d, "
@@ -1858,6 +1862,8 @@
if (!ops->vidioc_g_frequency)
break;
+ p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
+ V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
ret = ops->vidioc_g_frequency(file, fh, p);
if (!ret)
dbgarg(cmd, "tuner=%d, type=%d, frequency=%d\n",
@@ -1940,13 +1946,19 @@
case VIDIOC_S_HW_FREQ_SEEK:
{
struct v4l2_hw_freq_seek *p = arg;
+ enum v4l2_tuner_type type;
if (!ops->vidioc_s_hw_freq_seek)
break;
+ type = (vfd->vfl_type == VFL_TYPE_RADIO) ?
+ V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
dbgarg(cmd,
- "tuner=%d, type=%d, seek_upward=%d, wrap_around=%d\n",
- p->tuner, p->type, p->seek_upward, p->wrap_around);
- ret = ops->vidioc_s_hw_freq_seek(file, fh, p);
+ "tuner=%u, type=%u, seek_upward=%u, wrap_around=%u, spacing=%u\n",
+ p->tuner, p->type, p->seek_upward, p->wrap_around, p->spacing);
+ if (p->type != type)
+ ret = -EINVAL;
+ else
+ ret = ops->vidioc_s_hw_freq_seek(file, fh, p);
break;
}
case VIDIOC_ENUM_FRAMESIZES:
diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c
index 6ba1461..3015e60 100644
--- a/drivers/media/video/videobuf2-core.c
+++ b/drivers/media/video/videobuf2-core.c
@@ -492,13 +492,6 @@
return -EINVAL;
}
- /*
- * If the same number of buffers and memory access method is requested
- * then return immediately.
- */
- if (q->memory == req->memory && req->count == q->num_buffers)
- return 0;
-
if (req->count == 0 || q->num_buffers != 0 || q->memory != req->memory) {
/*
* We already have buffers allocated, so first check if they
@@ -539,9 +532,9 @@
/* Finally, allocate buffers and video memory */
ret = __vb2_queue_alloc(q, req->memory, num_buffers, num_planes,
plane_sizes);
- if (ret < 0) {
- dprintk(1, "Memory allocation failed with error: %d\n", ret);
- return ret;
+ if (ret == 0) {
+ dprintk(1, "Memory allocation failed\n");
+ return -ENOMEM;
}
/*
@@ -1196,6 +1189,7 @@
* has not already dequeued before initiating cancel.
*/
INIT_LIST_HEAD(&q->done_list);
+ atomic_set(&q->queued_count, 0);
wake_up_all(&q->done_wq);
/*
diff --git a/drivers/media/video/videobuf2-dma-sg.c b/drivers/media/video/videobuf2-dma-sg.c
index b2d9485..10a20d9 100644
--- a/drivers/media/video/videobuf2-dma-sg.c
+++ b/drivers/media/video/videobuf2-dma-sg.c
@@ -62,7 +62,7 @@
goto fail_pages_array_alloc;
for (i = 0; i < buf->sg_desc.num_pages; ++i) {
- buf->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO);
+ buf->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN);
if (NULL == buf->pages[i])
goto fail_pages_alloc;
sg_set_page(&buf->sg_desc.sglist[i],
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 0f09c05..6ca938a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -728,6 +728,9 @@
if you say yes here you get support for the TPS65910 series of
Power Management chips.
+config TPS65911_COMPARATOR
+ tristate
+
endif # MFD_SUPPORT
menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index efe3cc3..d7d47d2 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -94,3 +94,4 @@
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o
+obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index c27fd1f..c71ae09 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -619,6 +619,7 @@
/* MFD cells (SPI, PWM, LED, DS1WM, MMC) */
static struct ds1wm_driver_data ds1wm_pdata = {
.active_high = 1,
+ .reset_recover_delay = 1,
};
static struct resource ds1wm_resources[] = {
diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c
index 2808bd1..04c7093 100644
--- a/drivers/mfd/htc-pasic3.c
+++ b/drivers/mfd/htc-pasic3.c
@@ -99,6 +99,7 @@
static struct ds1wm_driver_data ds1wm_pdata = {
.active_high = 0,
+ .reset_recover_delay = 1,
};
static struct resource ds1wm_resources[] __initdata = {
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 8552195..1717144 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -26,7 +26,6 @@
#include <linux/spinlock.h>
#include <linux/gpio.h>
#include <plat/usb.h>
-#include <linux/pm_runtime.h>
#define USBHS_DRIVER_NAME "usbhs-omap"
#define OMAP_EHCI_DEVICE "ehci-omap"
@@ -147,6 +146,9 @@
struct usbhs_hcd_omap {
+ struct clk *usbhost_ick;
+ struct clk *usbhost_hs_fck;
+ struct clk *usbhost_fs_fck;
struct clk *xclk60mhsp1_ck;
struct clk *xclk60mhsp2_ck;
struct clk *utmi_p1_fck;
@@ -156,6 +158,8 @@
struct clk *usbhost_p2_fck;
struct clk *usbtll_p2_fck;
struct clk *init_60m_fclk;
+ struct clk *usbtll_fck;
+ struct clk *usbtll_ick;
void __iomem *uhh_base;
void __iomem *tll_base;
@@ -349,13 +353,46 @@
omap->platdata.ehci_data = pdata->ehci_data;
omap->platdata.ohci_data = pdata->ohci_data;
- pm_runtime_enable(&pdev->dev);
+ omap->usbhost_ick = clk_get(dev, "usbhost_ick");
+ if (IS_ERR(omap->usbhost_ick)) {
+ ret = PTR_ERR(omap->usbhost_ick);
+ dev_err(dev, "usbhost_ick failed error:%d\n", ret);
+ goto err_end;
+ }
+
+ omap->usbhost_hs_fck = clk_get(dev, "hs_fck");
+ if (IS_ERR(omap->usbhost_hs_fck)) {
+ ret = PTR_ERR(omap->usbhost_hs_fck);
+ dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret);
+ goto err_usbhost_ick;
+ }
+
+ omap->usbhost_fs_fck = clk_get(dev, "fs_fck");
+ if (IS_ERR(omap->usbhost_fs_fck)) {
+ ret = PTR_ERR(omap->usbhost_fs_fck);
+ dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret);
+ goto err_usbhost_hs_fck;
+ }
+
+ omap->usbtll_fck = clk_get(dev, "usbtll_fck");
+ if (IS_ERR(omap->usbtll_fck)) {
+ ret = PTR_ERR(omap->usbtll_fck);
+ dev_err(dev, "usbtll_fck failed error:%d\n", ret);
+ goto err_usbhost_fs_fck;
+ }
+
+ omap->usbtll_ick = clk_get(dev, "usbtll_ick");
+ if (IS_ERR(omap->usbtll_ick)) {
+ ret = PTR_ERR(omap->usbtll_ick);
+ dev_err(dev, "usbtll_ick failed error:%d\n", ret);
+ goto err_usbtll_fck;
+ }
omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
if (IS_ERR(omap->utmi_p1_fck)) {
ret = PTR_ERR(omap->utmi_p1_fck);
dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
- goto err_end;
+ goto err_usbtll_ick;
}
omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
@@ -485,8 +522,22 @@
err_utmi_p1_fck:
clk_put(omap->utmi_p1_fck);
+err_usbtll_ick:
+ clk_put(omap->usbtll_ick);
+
+err_usbtll_fck:
+ clk_put(omap->usbtll_fck);
+
+err_usbhost_fs_fck:
+ clk_put(omap->usbhost_fs_fck);
+
+err_usbhost_hs_fck:
+ clk_put(omap->usbhost_hs_fck);
+
+err_usbhost_ick:
+ clk_put(omap->usbhost_ick);
+
err_end:
- pm_runtime_disable(&pdev->dev);
kfree(omap);
end_probe:
@@ -520,7 +571,11 @@
clk_put(omap->utmi_p2_fck);
clk_put(omap->xclk60mhsp1_ck);
clk_put(omap->utmi_p1_fck);
- pm_runtime_disable(&pdev->dev);
+ clk_put(omap->usbtll_ick);
+ clk_put(omap->usbtll_fck);
+ clk_put(omap->usbhost_fs_fck);
+ clk_put(omap->usbhost_hs_fck);
+ clk_put(omap->usbhost_ick);
kfree(omap);
return 0;
@@ -640,6 +695,7 @@
struct usbhs_omap_platform_data *pdata = &omap->platdata;
unsigned long flags = 0;
int ret = 0;
+ unsigned long timeout;
unsigned reg;
dev_dbg(dev, "starting TI HSUSB Controller\n");
@@ -652,7 +708,11 @@
if (omap->count > 0)
goto end_count;
- pm_runtime_get_sync(dev);
+ clk_enable(omap->usbhost_ick);
+ clk_enable(omap->usbhost_hs_fck);
+ clk_enable(omap->usbhost_fs_fck);
+ clk_enable(omap->usbtll_fck);
+ clk_enable(omap->usbtll_ick);
if (pdata->ehci_data->phy_reset) {
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
@@ -676,6 +736,50 @@
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
+ /* perform TLL soft reset, and wait until reset is complete */
+ usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
+ OMAP_USBTLL_SYSCONFIG_SOFTRESET);
+
+ /* Wait for TLL reset to complete */
+ timeout = jiffies + msecs_to_jiffies(1000);
+ while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
+ & OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
+ cpu_relax();
+
+ if (time_after(jiffies, timeout)) {
+ dev_dbg(dev, "operation timed out\n");
+ ret = -EINVAL;
+ goto err_tll;
+ }
+ }
+
+ dev_dbg(dev, "TLL RESET DONE\n");
+
+ /* (1<<3) = no idle mode only for initial debugging */
+ usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
+ OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
+ OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
+ OMAP_USBTLL_SYSCONFIG_AUTOIDLE);
+
+ /* Put UHH in NoIdle/NoStandby mode */
+ reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG);
+ if (is_omap_usbhs_rev1(omap)) {
+ reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
+ | OMAP_UHH_SYSCONFIG_SIDLEMODE
+ | OMAP_UHH_SYSCONFIG_CACTIVITY
+ | OMAP_UHH_SYSCONFIG_MIDLEMODE);
+ reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+
+
+ } else if (is_omap_usbhs_rev2(omap)) {
+ reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
+ reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
+ reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
+ reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
+ }
+
+ usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
+
reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
/* setup ULPI bypass and burst configurations */
reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
@@ -815,8 +919,6 @@
return 0;
err_tll:
- pm_runtime_put_sync(dev);
- spin_unlock_irqrestore(&omap->lock, flags);
if (pdata->ehci_data->phy_reset) {
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
gpio_free(pdata->ehci_data->reset_gpio_port[0]);
@@ -824,6 +926,13 @@
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
gpio_free(pdata->ehci_data->reset_gpio_port[1]);
}
+
+ clk_disable(omap->usbtll_ick);
+ clk_disable(omap->usbtll_fck);
+ clk_disable(omap->usbhost_fs_fck);
+ clk_disable(omap->usbhost_hs_fck);
+ clk_disable(omap->usbhost_ick);
+ spin_unlock_irqrestore(&omap->lock, flags);
return ret;
}
@@ -896,7 +1005,11 @@
clk_disable(omap->utmi_p1_fck);
}
- pm_runtime_put_sync(dev);
+ clk_disable(omap->usbtll_ick);
+ clk_disable(omap->usbtll_fck);
+ clk_disable(omap->usbhost_fs_fck);
+ clk_disable(omap->usbhost_hs_fck);
+ clk_disable(omap->usbhost_ick);
/* The gpio_free migh sleep; so unlock the spinlock */
spin_unlock_irqrestore(&omap->lock, flags);
diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c
index 3d2dc56..283ac67 100644
--- a/drivers/mfd/tps65911-comparator.c
+++ b/drivers/mfd/tps65911-comparator.c
@@ -125,7 +125,7 @@
static __devinit int tps65911_comparator_probe(struct platform_device *pdev)
{
struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent);
- struct tps65910_platform_data *pdata = dev_get_platdata(tps65910->dev);
+ struct tps65910_board *pdata = dev_get_platdata(tps65910->dev);
int ret;
ret = comp_threshold_set(tps65910, COMP1, pdata->vmbch_threshold);
diff --git a/drivers/misc/apds990x.c b/drivers/misc/apds990x.c
index 200311f..e2a52e5 100644
--- a/drivers/misc/apds990x.c
+++ b/drivers/misc/apds990x.c
@@ -609,6 +609,7 @@
return ret;
}
+#if defined(CONFIG_PM) || defined(CONFIG_PM_RUNTIME)
static int apds990x_chip_on(struct apds990x_chip *chip)
{
int err = regulator_bulk_enable(ARRAY_SIZE(chip->regs),
@@ -624,6 +625,7 @@
apds990x_mode_on(chip);
return 0;
}
+#endif
static int apds990x_chip_off(struct apds990x_chip *chip)
{
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
index d019746..2a40d0e 100644
--- a/drivers/misc/cb710/sgbuf2.c
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -47,7 +47,7 @@
static inline bool needs_unaligned_copy(const void *ptr)
{
-#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
return false;
#else
return ((ptr - NULL) & 3) != 0;
diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c
index e01e08c..bc685bfc 100644
--- a/drivers/misc/cs5535-mfgpt.c
+++ b/drivers/misc/cs5535-mfgpt.c
@@ -174,7 +174,7 @@
timer_nr = t < max ? (int) t : -1;
} else {
/* check if the requested timer's available */
- if (test_bit(timer_nr, mfgpt->avail))
+ if (!test_bit(timer_nr, mfgpt->avail))
timer_nr = -1;
}
diff --git a/drivers/misc/ioc4.c b/drivers/misc/ioc4.c
index 668d41e..df03dd3 100644
--- a/drivers/misc/ioc4.c
+++ b/drivers/misc/ioc4.c
@@ -270,7 +270,7 @@
return IOC4_VARIANT_PCI_RT;
}
-static void __devinit
+static void
ioc4_load_modules(struct work_struct *work)
{
request_module("sgiioc4");
diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c
index 81d7fa4..150cd70 100644
--- a/drivers/misc/lkdtm.c
+++ b/drivers/misc/lkdtm.c
@@ -120,6 +120,7 @@
static enum cname cpoint = CN_INVALID;
static enum ctype cptype = CT_NONE;
static int count = DEFAULT_COUNT;
+static DEFINE_SPINLOCK(count_lock);
module_param(recur_count, int, 0644);
MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test, "\
@@ -230,11 +231,14 @@
static int lkdtm_parse_commandline(void)
{
int i;
+ unsigned long flags;
if (cpoint_count < 1 || recur_count < 1)
return -EINVAL;
+ spin_lock_irqsave(&count_lock, flags);
count = cpoint_count;
+ spin_unlock_irqrestore(&count_lock, flags);
/* No special parameters */
if (!cpoint_type && !cpoint_name)
@@ -349,6 +353,9 @@
static void lkdtm_handler(void)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&count_lock, flags);
count--;
printk(KERN_INFO "lkdtm: Crash point %s of type %s hit, trigger in %d rounds\n",
cp_name_to_str(cpoint), cp_type_to_str(cptype), count);
@@ -357,6 +364,7 @@
lkdtm_do_action(cptype);
count = cpoint_count;
}
+ spin_unlock_irqrestore(&count_lock, flags);
}
static int lkdtm_register_cpoint(enum cname which)
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index bb6f925..374dfcf 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -317,7 +317,8 @@
* a master, channel ID address
* used to write to PTI HW.
*
- * @mc: master, channel apeture ID address to be released.
+ * @mc: master, channel apeture ID address to be released. This
+ * will de-allocate the structure via kfree().
*/
void pti_release_masterchannel(struct pti_masterchannel *mc)
{
@@ -475,8 +476,10 @@
else
pti_tty_data->mc = pti_request_masterchannel(2);
- if (pti_tty_data->mc == NULL)
+ if (pti_tty_data->mc == NULL) {
+ kfree(pti_tty_data);
return -ENXIO;
+ }
tty->driver_data = pti_tty_data;
}
@@ -495,7 +498,7 @@
if (pti_tty_data == NULL)
return;
pti_release_masterchannel(pti_tty_data->mc);
- kfree(tty->driver_data);
+ kfree(pti_tty_data);
tty->driver_data = NULL;
}
@@ -581,7 +584,7 @@
static int pti_char_release(struct inode *inode, struct file *filp)
{
pti_release_masterchannel(filp->private_data);
- kfree(filp->private_data);
+ filp->private_data = NULL;
return 0;
}
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index ee5109a..42f0673 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -495,14 +495,14 @@
}
}
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
+
if (atomic_dec_return(&queued_msg->use_count) == 0) {
dev_kfree_skb(skb);
kfree(queued_msg);
}
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += skb->len;
-
return NETDEV_TX_OK;
}
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
index 7aded90..cfbddbe 100644
--- a/drivers/misc/spear13xx_pcie_gadget.c
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -845,7 +845,7 @@
err_iounmap_app:
iounmap(config->va_app_base);
err_kzalloc:
- kfree(config);
+ kfree(target);
err_rel_res:
release_mem_region(res1->start, resource_size(res1));
err_rel_res0:
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index f91f82e..54c91ff 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -605,7 +605,7 @@
pr_debug("%s: %d ", __func__, proto->chnl_id);
st_kim_ref(&st_gdata, 0);
- if (proto->chnl_id >= ST_MAX_CHANNELS) {
+ if (!st_gdata || proto->chnl_id >= ST_MAX_CHANNELS) {
pr_err(" chnl_id %d not supported", proto->chnl_id);
return -EPROTONOSUPPORT;
}
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 5da93ee..38fd2f0 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -245,9 +245,9 @@
pr_err("invalid action after change remote baud command");
} else {
*ptr = *ptr + sizeof(struct bts_action) +
- ((struct bts_action *)nxt_action)->size;
+ ((struct bts_action *)cur_action)->size;
*len = *len - (sizeof(struct bts_action) +
- ((struct bts_action *)nxt_action)->size);
+ ((struct bts_action *)cur_action)->size);
/* warn user on not commenting these in firmware */
pr_warn("skipping the wait event of change remote baud");
}
@@ -604,6 +604,10 @@
struct kim_data_s *kim_gdata;
/* get kim_gdata reference from platform device */
pdev = st_get_plat_device(id);
+ if (!pdev) {
+ *core_data = NULL;
+ return;
+ }
kim_gdata = dev_get_drvdata(&pdev->dev);
*core_data = kim_gdata->core_data;
}
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 71da564..f85e422 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1024,7 +1024,7 @@
INIT_LIST_HEAD(&md->part);
md->usage = 1;
- ret = mmc_init_queue(&md->queue, card, &md->lock);
+ ret = mmc_init_queue(&md->queue, card, &md->lock, subname);
if (ret)
goto err_putdisk;
@@ -1297,6 +1297,9 @@
struct mmc_blk_data *md = mmc_get_drvdata(card);
mmc_blk_remove_parts(card, md);
+ mmc_claim_host(card->host);
+ mmc_blk_part_switch(card, md);
+ mmc_release_host(card->host);
mmc_blk_remove_req(md);
mmc_set_drvdata(card, NULL);
}
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index c07322c..6413afa 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -106,10 +106,12 @@
* @mq: mmc queue
* @card: mmc card to attach this queue
* @lock: queue lock
+ * @subname: partition subname
*
* Initialise a MMC card request queue.
*/
-int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock)
+int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
+ spinlock_t *lock, const char *subname)
{
struct mmc_host *host = card->host;
u64 limit = BLK_BOUNCE_HIGH;
@@ -133,12 +135,7 @@
mq->queue->limits.max_discard_sectors = UINT_MAX;
if (card->erased_byte == 0)
mq->queue->limits.discard_zeroes_data = 1;
- if (!mmc_can_trim(card) && is_power_of_2(card->erase_size)) {
- mq->queue->limits.discard_granularity =
- card->erase_size << 9;
- mq->queue->limits.discard_alignment =
- card->erase_size << 9;
- }
+ mq->queue->limits.discard_granularity = card->pref_erase << 9;
if (mmc_can_secure_erase_trim(card))
queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD,
mq->queue);
@@ -209,8 +206,8 @@
sema_init(&mq->thread_sem, 1);
- mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d",
- host->index);
+ mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d%s",
+ host->index, subname ? subname : "");
if (IS_ERR(mq->thread)) {
ret = PTR_ERR(mq->thread);
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index 64e66e0..6223ef8 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -19,7 +19,8 @@
unsigned int bounce_sg_len;
};
-extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *);
+extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *,
+ const char *);
extern void mmc_cleanup_queue(struct mmc_queue *);
extern void mmc_queue_suspend(struct mmc_queue *);
extern void mmc_queue_resume(struct mmc_queue *);
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 68091dd..7843efe 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1245,7 +1245,7 @@
*/
timeout_clks <<= 1;
timeout_us += (timeout_clks * 1000) /
- (card->host->ios.clock / 1000);
+ (mmc_host_clk_rate(card->host) / 1000);
erase_timeout = timeout_us / 1000;
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 2a7e43b..aa7d1d7 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -247,12 +247,12 @@
return 0;
/* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */
+ card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
if (card->csd.structure == 3) {
- int ext_csd_struct = ext_csd[EXT_CSD_STRUCTURE];
- if (ext_csd_struct > 2) {
+ if (card->ext_csd.raw_ext_csd_structure > 2) {
printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
"version %d\n", mmc_hostname(card->host),
- ext_csd_struct);
+ card->ext_csd.raw_ext_csd_structure);
err = -EINVAL;
goto out;
}
@@ -266,6 +266,10 @@
goto out;
}
+ card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0];
+ card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1];
+ card->ext_csd.raw_sectors[2] = ext_csd[EXT_CSD_SEC_CNT + 2];
+ card->ext_csd.raw_sectors[3] = ext_csd[EXT_CSD_SEC_CNT + 3];
if (card->ext_csd.rev >= 2) {
card->ext_csd.sectors =
ext_csd[EXT_CSD_SEC_CNT + 0] << 0 |
@@ -277,7 +281,7 @@
if (card->ext_csd.sectors > (2u * 1024 * 1024 * 1024) / 512)
mmc_card_set_blockaddr(card);
}
-
+ card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 |
EXT_CSD_CARD_TYPE_26:
@@ -307,6 +311,11 @@
mmc_hostname(card->host));
}
+ card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT];
+ card->ext_csd.raw_erase_timeout_mult =
+ ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT];
+ card->ext_csd.raw_hc_erase_grp_size =
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
if (card->ext_csd.rev >= 3) {
u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT];
card->ext_csd.part_config = ext_csd[EXT_CSD_PART_CONFIG];
@@ -334,6 +343,16 @@
card->ext_csd.boot_size = ext_csd[EXT_CSD_BOOT_MULT] << 17;
}
+ card->ext_csd.raw_hc_erase_gap_size =
+ ext_csd[EXT_CSD_PARTITION_ATTRIBUTE];
+ card->ext_csd.raw_sec_trim_mult =
+ ext_csd[EXT_CSD_SEC_TRIM_MULT];
+ card->ext_csd.raw_sec_erase_mult =
+ ext_csd[EXT_CSD_SEC_ERASE_MULT];
+ card->ext_csd.raw_sec_feature_support =
+ ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
+ card->ext_csd.raw_trim_mult =
+ ext_csd[EXT_CSD_TRIM_MULT];
if (card->ext_csd.rev >= 4) {
/*
* Enhanced area feature support -- check whether the eMMC
@@ -341,7 +360,7 @@
* area offset and size to user by adding sysfs interface.
*/
if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
- (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
+ (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
u8 hc_erase_grp_sz =
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
u8 hc_wp_grp_sz =
@@ -401,17 +420,17 @@
}
-static int mmc_compare_ext_csds(struct mmc_card *card, u8 *ext_csd,
- unsigned bus_width)
+static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width)
{
u8 *bw_ext_csd;
int err;
- err = mmc_get_ext_csd(card, &bw_ext_csd);
- if (err)
- return err;
+ if (bus_width == MMC_BUS_WIDTH_1)
+ return 0;
- if ((ext_csd == NULL || bw_ext_csd == NULL)) {
+ err = mmc_get_ext_csd(card, &bw_ext_csd);
+
+ if (err || bw_ext_csd == NULL) {
if (bus_width != MMC_BUS_WIDTH_1)
err = -EINVAL;
goto out;
@@ -421,35 +440,40 @@
goto out;
/* only compare read only fields */
- err = (!(ext_csd[EXT_CSD_PARTITION_SUPPORT] ==
+ err = (!(card->ext_csd.raw_partition_support ==
bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) &&
- (ext_csd[EXT_CSD_ERASED_MEM_CONT] ==
+ (card->ext_csd.raw_erased_mem_count ==
bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) &&
- (ext_csd[EXT_CSD_REV] ==
+ (card->ext_csd.rev ==
bw_ext_csd[EXT_CSD_REV]) &&
- (ext_csd[EXT_CSD_STRUCTURE] ==
+ (card->ext_csd.raw_ext_csd_structure ==
bw_ext_csd[EXT_CSD_STRUCTURE]) &&
- (ext_csd[EXT_CSD_CARD_TYPE] ==
+ (card->ext_csd.raw_card_type ==
bw_ext_csd[EXT_CSD_CARD_TYPE]) &&
- (ext_csd[EXT_CSD_S_A_TIMEOUT] ==
+ (card->ext_csd.raw_s_a_timeout ==
bw_ext_csd[EXT_CSD_S_A_TIMEOUT]) &&
- (ext_csd[EXT_CSD_HC_WP_GRP_SIZE] ==
+ (card->ext_csd.raw_hc_erase_gap_size ==
bw_ext_csd[EXT_CSD_HC_WP_GRP_SIZE]) &&
- (ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT] ==
+ (card->ext_csd.raw_erase_timeout_mult ==
bw_ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]) &&
- (ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] ==
+ (card->ext_csd.raw_hc_erase_grp_size ==
bw_ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]) &&
- (ext_csd[EXT_CSD_SEC_TRIM_MULT] ==
+ (card->ext_csd.raw_sec_trim_mult ==
bw_ext_csd[EXT_CSD_SEC_TRIM_MULT]) &&
- (ext_csd[EXT_CSD_SEC_ERASE_MULT] ==
+ (card->ext_csd.raw_sec_erase_mult ==
bw_ext_csd[EXT_CSD_SEC_ERASE_MULT]) &&
- (ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT] ==
+ (card->ext_csd.raw_sec_feature_support ==
bw_ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) &&
- (ext_csd[EXT_CSD_TRIM_MULT] ==
+ (card->ext_csd.raw_trim_mult ==
bw_ext_csd[EXT_CSD_TRIM_MULT]) &&
- memcmp(&ext_csd[EXT_CSD_SEC_CNT],
- &bw_ext_csd[EXT_CSD_SEC_CNT],
- 4) != 0);
+ (card->ext_csd.raw_sectors[0] ==
+ bw_ext_csd[EXT_CSD_SEC_CNT + 0]) &&
+ (card->ext_csd.raw_sectors[1] ==
+ bw_ext_csd[EXT_CSD_SEC_CNT + 1]) &&
+ (card->ext_csd.raw_sectors[2] ==
+ bw_ext_csd[EXT_CSD_SEC_CNT + 2]) &&
+ (card->ext_csd.raw_sectors[3] ==
+ bw_ext_csd[EXT_CSD_SEC_CNT + 3]));
if (err)
err = -EINVAL;
@@ -770,7 +794,6 @@
*/
if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
err = mmc_compare_ext_csds(card,
- ext_csd,
bus_width);
else
err = mmc_bus_test(card, bus_width);
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 4d0c15b..262fff0 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -691,15 +691,54 @@
static int mmc_sdio_power_restore(struct mmc_host *host)
{
int ret;
+ u32 ocr;
BUG_ON(!host);
BUG_ON(!host->card);
mmc_claim_host(host);
+
+ /*
+ * Reset the card by performing the same steps that are taken by
+ * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
+ *
+ * sdio_reset() is technically not needed. Having just powered up the
+ * hardware, it should already be in reset state. However, some
+ * platforms (such as SD8686 on OLPC) do not instantly cut power,
+ * meaning that a reset is required when restoring power soon after
+ * powering off. It is harmless in other cases.
+ *
+ * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec,
+ * is not necessary for non-removable cards. However, it is required
+ * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
+ * harmless in other situations.
+ *
+ * With these steps taken, mmc_select_voltage() is also required to
+ * restore the correct voltage setting of the card.
+ */
+ sdio_reset(host);
+ mmc_go_idle(host);
+ mmc_send_if_cond(host, host->ocr_avail);
+
+ ret = mmc_send_io_op_cond(host, 0, &ocr);
+ if (ret)
+ goto out;
+
+ if (host->ocr_avail_sdio)
+ host->ocr_avail = host->ocr_avail_sdio;
+
+ host->ocr = mmc_select_voltage(host, ocr & ~0x7F);
+ if (!host->ocr) {
+ ret = -EINVAL;
+ goto out;
+ }
+
ret = mmc_sdio_init_card(host, host->ocr, host->card,
mmc_card_keep_power(host));
if (!ret && host->sdio_irqs)
mmc_signal_sdio_irq(host);
+
+out:
mmc_release_host(host);
return ret;
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index d29b9c3..d2565df 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -189,7 +189,7 @@
/* Then undo the runtime PM settings in sdio_bus_probe() */
if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
- pm_runtime_put_noidle(dev);
+ pm_runtime_put_sync(dev);
out:
return ret;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 5da5bea0..fe14072 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -582,6 +582,8 @@
data->error = -EILSEQ;
} else if (status & MCI_DATATIMEOUT) {
data->error = -ETIMEDOUT;
+ } else if (status & MCI_STARTBITERR) {
+ data->error = -ECOMM;
} else if (status & MCI_TXUNDERRUN) {
data->error = -EIO;
} else if (status & MCI_RXOVERRUN) {
@@ -1144,9 +1146,17 @@
else if (ret != -ENOSYS)
goto err_gpio_cd;
+ /*
+ * A gpio pin that will detect cards when inserted and removed
+ * will most likely want to trigger on the edges if it is
+ * 0 when ejected and 1 when inserted (or mutatis mutandis
+ * for the inverted case) so we request triggers on both
+ * edges.
+ */
ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd),
- mmci_cd_irq, 0,
- DRIVER_NAME " (cd)", host);
+ mmci_cd_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ DRIVER_NAME " (cd)", host);
if (ret >= 0)
host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
}
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index bb32e21..2164e8c 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -86,6 +86,7 @@
#define MCI_CMDRESPEND (1 << 6)
#define MCI_CMDSENT (1 << 7)
#define MCI_DATAEND (1 << 8)
+#define MCI_STARTBITERR (1 << 9)
#define MCI_DATABLOCKEND (1 << 10)
#define MCI_CMDACTIVE (1 << 11)
#define MCI_TXACTIVE (1 << 12)
@@ -112,6 +113,7 @@
#define MCI_CMDRESPENDCLR (1 << 6)
#define MCI_CMDSENTCLR (1 << 7)
#define MCI_DATAENDCLR (1 << 8)
+#define MCI_STARTBITERRCLR (1 << 9)
#define MCI_DATABLOCKENDCLR (1 << 10)
/* Extended status bits for the ST Micro variants */
#define MCI_ST_SDIOITC (1 << 22)
@@ -127,6 +129,7 @@
#define MCI_CMDRESPENDMASK (1 << 6)
#define MCI_CMDSENTMASK (1 << 7)
#define MCI_DATAENDMASK (1 << 8)
+#define MCI_STARTBITERRMASK (1 << 9)
#define MCI_DATABLOCKENDMASK (1 << 10)
#define MCI_CMDACTIVEMASK (1 << 11)
#define MCI_TXACTIVEMASK (1 << 12)
@@ -150,7 +153,7 @@
#define MCI_IRQENABLE \
(MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \
MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \
- MCI_CMDRESPENDMASK|MCI_CMDSENTMASK)
+ MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK)
/* These interrupts are directed to IRQ1 when two IRQ lines are available */
#define MCI_IRQ1MASK \
diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c
index e2aecb7..ab66f24 100644
--- a/drivers/mmc/host/of_mmc_spi.c
+++ b/drivers/mmc/host/of_mmc_spi.c
@@ -25,6 +25,11 @@
#include <linux/mmc/core.h>
#include <linux/mmc/host.h>
+/* For archs that don't support NO_IRQ (such as mips), provide a dummy value */
+#ifndef NO_IRQ
+#define NO_IRQ 0
+#endif
+
MODULE_LICENSE("GPL");
enum {
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 259ece0..dedf3da 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -429,12 +429,14 @@
return -EINVAL;
}
}
- mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg);
/* Allow an aux regulator */
reg = regulator_get(host->dev, "vmmc_aux");
host->vcc_aux = IS_ERR(reg) ? NULL : reg;
+ /* For eMMC do not power off when not in sleep state */
+ if (mmc_slot(host).no_regulator_off_init)
+ return 0;
/*
* UGLY HACK: workaround regulator framework bugs.
* When the bootloader leaves a supply active, it's
@@ -959,7 +961,8 @@
spin_unlock(&host->irq_lock);
if (host->use_dma && dma_ch != -1) {
- dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
+ dma_unmap_sg(mmc_dev(host->mmc), host->data->sg,
+ host->data->sg_len,
omap_hsmmc_get_dma_dir(host, host->data));
omap_free_dma(dma_ch);
}
@@ -1343,7 +1346,7 @@
return;
}
- dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
omap_hsmmc_get_dma_dir(host, data));
req_in_progress = host->req_in_progress;
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index b365429..ce500f0 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -92,7 +92,7 @@
mmc_data->ocr_mask = p->tmio_ocr_mask;
mmc_data->capabilities |= p->tmio_caps;
- if (p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) {
+ if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) {
priv->param_tx.slave_id = p->dma_slave_tx;
priv->param_rx.slave_id = p->dma_slave_rx;
priv->dma_priv.chan_priv_tx = &priv->param_tx;
@@ -165,13 +165,14 @@
p->pdata = NULL;
+ tmio_mmc_host_remove(host);
+
for (i = 0; i < 3; i++) {
irq = platform_get_irq(pdev, i);
if (irq >= 0)
free_irq(irq, host);
}
- tmio_mmc_host_remove(host);
clk_disable(priv->clk);
clk_put(priv->clk);
kfree(priv);
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index ad6347b..0b09e82 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -824,8 +824,8 @@
struct tmio_mmc_host *host = mmc_priv(mmc);
struct tmio_mmc_data *pdata = host->pdata;
- return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
- !(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
+ return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) ||
+ (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT));
}
static int tmio_mmc_get_cd(struct mmc_host *mmc)
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index cbb0330..d4455ff 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -2096,7 +2096,7 @@
static int vub300_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{ /* NOT irq */
- struct vub300_mmc_host *vub300 = NULL;
+ struct vub300_mmc_host *vub300;
struct usb_host_interface *iface_desc;
struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
int i;
@@ -2118,23 +2118,20 @@
command_out_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!command_out_urb) {
retval = -ENOMEM;
- dev_err(&vub300->udev->dev,
- "not enough memory for the command_out_urb\n");
+ dev_err(&udev->dev, "not enough memory for command_out_urb\n");
goto error0;
}
command_res_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!command_res_urb) {
retval = -ENOMEM;
- dev_err(&vub300->udev->dev,
- "not enough memory for the command_res_urb\n");
+ dev_err(&udev->dev, "not enough memory for command_res_urb\n");
goto error1;
}
/* this also allocates memory for our VUB300 mmc host device */
mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev);
if (!mmc) {
retval = -ENOMEM;
- dev_err(&vub300->udev->dev,
- "not enough memory for the mmc_host\n");
+ dev_err(&udev->dev, "not enough memory for the mmc_host\n");
goto error4;
}
/* MMC core transfer sizes tunable parameters */
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 0bb254c..33d8aad 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -339,9 +339,9 @@
(FIR_OP_UA << FIR_OP1_SHIFT) |
(FIR_OP_RBW << FIR_OP2_SHIFT));
out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT);
- /* 5 bytes for manuf, device and exts */
- out_be32(&lbc->fbcr, 5);
- elbc_fcm_ctrl->read_bytes = 5;
+ /* nand_get_flash_type() reads 8 bytes of entire ID string */
+ out_be32(&lbc->fbcr, 8);
+ elbc_fcm_ctrl->read_bytes = 8;
elbc_fcm_ctrl->use_mdr = 1;
elbc_fcm_ctrl->mdr = 0;
diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c
index d84f6e8..5b73298 100644
--- a/drivers/net/3c503.c
+++ b/drivers/net/3c503.c
@@ -412,7 +412,7 @@
outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR);
outb_p(0x00, E33G_IDCFR);
msleep(1);
- free_irq(*irqp, el2_probe_interrupt);
+ free_irq(*irqp, &seen);
if (!seen)
continue;
@@ -422,6 +422,7 @@
continue;
if (retval < 0)
goto err_disable;
+ break;
} while (*++irqp);
if (*irqp == 0) {
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 98517a3..e3bad82 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -992,6 +992,7 @@
* features
*/
dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+ dev->vlan_features = dev->features;
dev->irq = pdev->irq;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 19f04a3..93359fa 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -3416,7 +3416,8 @@
config NETCONSOLE_DYNAMIC
bool "Dynamic reconfiguration of logging targets"
- depends on NETCONSOLE && SYSFS && CONFIGFS_FS
+ depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \
+ !(NETCONSOLE=y && CONFIGFS_FS=m)
help
This option enables the ability to dynamically reconfigure target
parameters (interface, IP addresses, port numbers, MAC addresses)
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 0c9217f..7b3e23f 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -50,7 +50,7 @@
#ifdef __arm__
static void write_rreg(u_long base, u_int reg, u_int val)
{
- __asm__(
+ asm volatile(
"str%?h %1, [%2] @ NET_RAP\n\t"
"str%?h %0, [%2, #-4] @ NET_RDP"
:
@@ -60,7 +60,7 @@
static inline unsigned short read_rreg(u_long base_addr, u_int reg)
{
unsigned short v;
- __asm__(
+ asm volatile(
"str%?h %1, [%2] @ NET_RAP\n\t"
"ldr%?h %0, [%2, #-4] @ NET_RDP"
: "=r" (v)
@@ -70,7 +70,7 @@
static inline void write_ireg(u_long base, u_int reg, u_int val)
{
- __asm__(
+ asm volatile(
"str%?h %1, [%2] @ NET_RAP\n\t"
"str%?h %0, [%2, #8] @ NET_IDP"
:
@@ -80,7 +80,7 @@
static inline unsigned short read_ireg(u_long base_addr, u_int reg)
{
u_short v;
- __asm__(
+ asm volatile(
"str%?h %1, [%2] @ NAT_RAP\n\t"
"ldr%?h %0, [%2, #8] @ NET_IDP\n\t"
: "=r" (v)
@@ -91,47 +91,48 @@
#define am_writeword(dev,off,val) __raw_writew(val, ISAMEM_BASE + ((off) << 1))
#define am_readword(dev,off) __raw_readw(ISAMEM_BASE + ((off) << 1))
-static inline void
+static void
am_writebuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
{
offset = ISAMEM_BASE + (offset << 1);
length = (length + 1) & ~1;
if ((int)buf & 2) {
- __asm__ __volatile__("str%?h %2, [%0], #4"
+ asm volatile("str%?h %2, [%0], #4"
: "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
buf += 2;
length -= 2;
}
while (length > 8) {
- unsigned int tmp, tmp2;
- __asm__ __volatile__(
- "ldm%?ia %1!, {%2, %3}\n\t"
+ register unsigned int tmp asm("r2"), tmp2 asm("r3");
+ asm volatile(
+ "ldm%?ia %0!, {%1, %2}"
+ : "+r" (buf), "=&r" (tmp), "=&r" (tmp2));
+ length -= 8;
+ asm volatile(
+ "str%?h %1, [%0], #4\n\t"
+ "mov%? %1, %1, lsr #16\n\t"
+ "str%?h %1, [%0], #4\n\t"
"str%?h %2, [%0], #4\n\t"
"mov%? %2, %2, lsr #16\n\t"
- "str%?h %2, [%0], #4\n\t"
- "str%?h %3, [%0], #4\n\t"
- "mov%? %3, %3, lsr #16\n\t"
- "str%?h %3, [%0], #4"
- : "=&r" (offset), "=&r" (buf), "=r" (tmp), "=r" (tmp2)
- : "0" (offset), "1" (buf));
- length -= 8;
+ "str%?h %2, [%0], #4"
+ : "+r" (offset), "=&r" (tmp), "=&r" (tmp2));
}
while (length > 0) {
- __asm__ __volatile__("str%?h %2, [%0], #4"
+ asm volatile("str%?h %2, [%0], #4"
: "=&r" (offset) : "0" (offset), "r" (buf[0] | (buf[1] << 8)));
buf += 2;
length -= 2;
}
}
-static inline void
+static void
am_readbuffer(struct net_device *dev, u_int offset, unsigned char *buf, unsigned int length)
{
offset = ISAMEM_BASE + (offset << 1);
length = (length + 1) & ~1;
if ((int)buf & 2) {
unsigned int tmp;
- __asm__ __volatile__(
+ asm volatile(
"ldr%?h %2, [%0], #4\n\t"
"str%?b %2, [%1], #1\n\t"
"mov%? %2, %2, lsr #8\n\t"
@@ -140,12 +141,12 @@
length -= 2;
}
while (length > 8) {
- unsigned int tmp, tmp2, tmp3;
- __asm__ __volatile__(
+ register unsigned int tmp asm("r2"), tmp2 asm("r3"), tmp3;
+ asm volatile(
"ldr%?h %2, [%0], #4\n\t"
+ "ldr%?h %4, [%0], #4\n\t"
"ldr%?h %3, [%0], #4\n\t"
- "orr%? %2, %2, %3, lsl #16\n\t"
- "ldr%?h %3, [%0], #4\n\t"
+ "orr%? %2, %2, %4, lsl #16\n\t"
"ldr%?h %4, [%0], #4\n\t"
"orr%? %3, %3, %4, lsl #16\n\t"
"stm%?ia %1!, {%2, %3}"
@@ -155,7 +156,7 @@
}
while (length > 0) {
unsigned int tmp;
- __asm__ __volatile__(
+ asm volatile(
"ldr%?h %2, [%0], #4\n\t"
"str%?b %2, [%1], #1\n\t"
"mov%? %2, %2, lsr #8\n\t"
@@ -196,6 +197,42 @@
return errorcount;
}
+static void am79c961_mc_hash(char *addr, u16 *hash)
+{
+ if (addr[0] & 0x01) {
+ int idx, bit;
+ u32 crc;
+
+ crc = ether_crc_le(ETH_ALEN, addr);
+
+ idx = crc >> 30;
+ bit = (crc >> 26) & 15;
+
+ hash[idx] |= 1 << bit;
+ }
+}
+
+static unsigned int am79c961_get_rx_mode(struct net_device *dev, u16 *hash)
+{
+ unsigned int mode = MODE_PORT_10BT;
+
+ if (dev->flags & IFF_PROMISC) {
+ mode |= MODE_PROMISC;
+ memset(hash, 0xff, 4 * sizeof(*hash));
+ } else if (dev->flags & IFF_ALLMULTI) {
+ memset(hash, 0xff, 4 * sizeof(*hash));
+ } else {
+ struct netdev_hw_addr *ha;
+
+ memset(hash, 0, 4 * sizeof(*hash));
+
+ netdev_for_each_mc_addr(ha, dev)
+ am79c961_mc_hash(ha->addr, hash);
+ }
+
+ return mode;
+}
+
static void
am79c961_init_for_open(struct net_device *dev)
{
@@ -203,6 +240,7 @@
unsigned long flags;
unsigned char *p;
u_int hdr_addr, first_free_addr;
+ u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
int i;
/*
@@ -218,16 +256,12 @@
write_ireg (dev->base_addr, 2, 0x0000); /* MODE register selects media */
for (i = LADRL; i <= LADRH; i++)
- write_rreg (dev->base_addr, i, 0);
+ write_rreg (dev->base_addr, i, multi_hash[i - LADRL]);
for (i = PADRL, p = dev->dev_addr; i <= PADRH; i++, p += 2)
write_rreg (dev->base_addr, i, p[0] | (p[1] << 8));
- i = MODE_PORT_10BT;
- if (dev->flags & IFF_PROMISC)
- i |= MODE_PROMISC;
-
- write_rreg (dev->base_addr, MODE, i);
+ write_rreg (dev->base_addr, MODE, mode);
write_rreg (dev->base_addr, POLLINT, 0);
write_rreg (dev->base_addr, SIZERXR, -RX_BUFFERS);
write_rreg (dev->base_addr, SIZETXR, -TX_BUFFERS);
@@ -340,21 +374,6 @@
return 0;
}
-static void am79c961_mc_hash(char *addr, unsigned short *hash)
-{
- if (addr[0] & 0x01) {
- int idx, bit;
- u32 crc;
-
- crc = ether_crc_le(ETH_ALEN, addr);
-
- idx = crc >> 30;
- bit = (crc >> 26) & 15;
-
- hash[idx] |= 1 << bit;
- }
-}
-
/*
* Set or clear promiscuous/multicast mode filter for this adapter.
*/
@@ -362,24 +381,9 @@
{
struct dev_priv *priv = netdev_priv(dev);
unsigned long flags;
- unsigned short multi_hash[4], mode;
+ u16 multi_hash[4], mode = am79c961_get_rx_mode(dev, multi_hash);
int i, stopped;
- mode = MODE_PORT_10BT;
-
- if (dev->flags & IFF_PROMISC) {
- mode |= MODE_PROMISC;
- } else if (dev->flags & IFF_ALLMULTI) {
- memset(multi_hash, 0xff, sizeof(multi_hash));
- } else {
- struct netdev_hw_addr *ha;
-
- memset(multi_hash, 0x00, sizeof(multi_hash));
-
- netdev_for_each_mc_addr(ha, dev)
- am79c961_mc_hash(ha->addr, multi_hash);
- }
-
spin_lock_irqsave(&priv->chip_lock, flags);
stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 5a77001..0b46b8e 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -283,10 +283,14 @@
skb = dev_alloc_skb(length + 2);
if (likely(skb != NULL)) {
+ struct ep93xx_rdesc *rxd = &ep->descs->rdesc[entry];
skb_reserve(skb, 2);
- dma_sync_single_for_cpu(NULL, ep->descs->rdesc[entry].buf_addr,
+ dma_sync_single_for_cpu(dev->dev.parent, rxd->buf_addr,
length, DMA_FROM_DEVICE);
skb_copy_to_linear_data(skb, ep->rx_buf[entry], length);
+ dma_sync_single_for_device(dev->dev.parent,
+ rxd->buf_addr, length,
+ DMA_FROM_DEVICE);
skb_put(skb, length);
skb->protocol = eth_type_trans(skb, dev);
@@ -348,6 +352,7 @@
static int ep93xx_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ep93xx_priv *ep = netdev_priv(dev);
+ struct ep93xx_tdesc *txd;
int entry;
if (unlikely(skb->len > MAX_PKT_SIZE)) {
@@ -359,11 +364,14 @@
entry = ep->tx_pointer;
ep->tx_pointer = (ep->tx_pointer + 1) & (TX_QUEUE_ENTRIES - 1);
- ep->descs->tdesc[entry].tdesc1 =
- TDESC1_EOF | (entry << 16) | (skb->len & 0xfff);
+ txd = &ep->descs->tdesc[entry];
+
+ txd->tdesc1 = TDESC1_EOF | (entry << 16) | (skb->len & 0xfff);
+ dma_sync_single_for_cpu(dev->dev.parent, txd->buf_addr, skb->len,
+ DMA_TO_DEVICE);
skb_copy_and_csum_dev(skb, ep->tx_buf[entry]);
- dma_sync_single_for_cpu(NULL, ep->descs->tdesc[entry].buf_addr,
- skb->len, DMA_TO_DEVICE);
+ dma_sync_single_for_device(dev->dev.parent, txd->buf_addr, skb->len,
+ DMA_TO_DEVICE);
dev_kfree_skb(skb);
spin_lock_irq(&ep->tx_pending_lock);
@@ -457,89 +465,80 @@
static void ep93xx_free_buffers(struct ep93xx_priv *ep)
{
+ struct device *dev = ep->dev->dev.parent;
int i;
- for (i = 0; i < RX_QUEUE_ENTRIES; i += 2) {
+ for (i = 0; i < RX_QUEUE_ENTRIES; i++) {
dma_addr_t d;
d = ep->descs->rdesc[i].buf_addr;
if (d)
- dma_unmap_single(NULL, d, PAGE_SIZE, DMA_FROM_DEVICE);
+ dma_unmap_single(dev, d, PKT_BUF_SIZE, DMA_FROM_DEVICE);
if (ep->rx_buf[i] != NULL)
- free_page((unsigned long)ep->rx_buf[i]);
+ kfree(ep->rx_buf[i]);
}
- for (i = 0; i < TX_QUEUE_ENTRIES; i += 2) {
+ for (i = 0; i < TX_QUEUE_ENTRIES; i++) {
dma_addr_t d;
d = ep->descs->tdesc[i].buf_addr;
if (d)
- dma_unmap_single(NULL, d, PAGE_SIZE, DMA_TO_DEVICE);
+ dma_unmap_single(dev, d, PKT_BUF_SIZE, DMA_TO_DEVICE);
if (ep->tx_buf[i] != NULL)
- free_page((unsigned long)ep->tx_buf[i]);
+ kfree(ep->tx_buf[i]);
}
- dma_free_coherent(NULL, sizeof(struct ep93xx_descs), ep->descs,
+ dma_free_coherent(dev, sizeof(struct ep93xx_descs), ep->descs,
ep->descs_dma_addr);
}
-/*
- * The hardware enforces a sub-2K maximum packet size, so we put
- * two buffers on every hardware page.
- */
static int ep93xx_alloc_buffers(struct ep93xx_priv *ep)
{
+ struct device *dev = ep->dev->dev.parent;
int i;
- ep->descs = dma_alloc_coherent(NULL, sizeof(struct ep93xx_descs),
- &ep->descs_dma_addr, GFP_KERNEL | GFP_DMA);
+ ep->descs = dma_alloc_coherent(dev, sizeof(struct ep93xx_descs),
+ &ep->descs_dma_addr, GFP_KERNEL);
if (ep->descs == NULL)
return 1;
- for (i = 0; i < RX_QUEUE_ENTRIES; i += 2) {
- void *page;
+ for (i = 0; i < RX_QUEUE_ENTRIES; i++) {
+ void *buf;
dma_addr_t d;
- page = (void *)__get_free_page(GFP_KERNEL | GFP_DMA);
- if (page == NULL)
+ buf = kmalloc(PKT_BUF_SIZE, GFP_KERNEL);
+ if (buf == NULL)
goto err;
- d = dma_map_single(NULL, page, PAGE_SIZE, DMA_FROM_DEVICE);
- if (dma_mapping_error(NULL, d)) {
- free_page((unsigned long)page);
+ d = dma_map_single(dev, buf, PKT_BUF_SIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, d)) {
+ kfree(buf);
goto err;
}
- ep->rx_buf[i] = page;
+ ep->rx_buf[i] = buf;
ep->descs->rdesc[i].buf_addr = d;
ep->descs->rdesc[i].rdesc1 = (i << 16) | PKT_BUF_SIZE;
-
- ep->rx_buf[i + 1] = page + PKT_BUF_SIZE;
- ep->descs->rdesc[i + 1].buf_addr = d + PKT_BUF_SIZE;
- ep->descs->rdesc[i + 1].rdesc1 = ((i + 1) << 16) | PKT_BUF_SIZE;
}
- for (i = 0; i < TX_QUEUE_ENTRIES; i += 2) {
- void *page;
+ for (i = 0; i < TX_QUEUE_ENTRIES; i++) {
+ void *buf;
dma_addr_t d;
- page = (void *)__get_free_page(GFP_KERNEL | GFP_DMA);
- if (page == NULL)
+ buf = kmalloc(PKT_BUF_SIZE, GFP_KERNEL);
+ if (buf == NULL)
goto err;
- d = dma_map_single(NULL, page, PAGE_SIZE, DMA_TO_DEVICE);
- if (dma_mapping_error(NULL, d)) {
- free_page((unsigned long)page);
+ d = dma_map_single(dev, buf, PKT_BUF_SIZE, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, d)) {
+ kfree(buf);
goto err;
}
- ep->tx_buf[i] = page;
+ ep->tx_buf[i] = buf;
ep->descs->tdesc[i].buf_addr = d;
-
- ep->tx_buf[i + 1] = page + PKT_BUF_SIZE;
- ep->descs->tdesc[i + 1].buf_addr = d + PKT_BUF_SIZE;
}
return 0;
@@ -829,6 +828,7 @@
}
ep = netdev_priv(dev);
ep->dev = dev;
+ SET_NETDEV_DEV(dev, &pdev->dev);
netif_napi_add(dev, &ep->napi, ep93xx_poll, 64);
platform_set_drvdata(pdev, dev);
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 68d45ba..6c019e1 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -52,13 +52,13 @@
MODULE_ALIAS("platform:bfin_mac");
#if defined(CONFIG_BFIN_MAC_USE_L1)
-# define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size)
-# define bfin_mac_free(dma_handle, ptr) l1_data_sram_free(ptr)
+# define bfin_mac_alloc(dma_handle, size, num) l1_data_sram_zalloc(size*num)
+# define bfin_mac_free(dma_handle, ptr, num) l1_data_sram_free(ptr)
#else
-# define bfin_mac_alloc(dma_handle, size) \
- dma_alloc_coherent(NULL, size, dma_handle, GFP_KERNEL)
-# define bfin_mac_free(dma_handle, ptr) \
- dma_free_coherent(NULL, sizeof(*ptr), ptr, dma_handle)
+# define bfin_mac_alloc(dma_handle, size, num) \
+ dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL)
+# define bfin_mac_free(dma_handle, ptr, num) \
+ dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle)
#endif
#define PKT_BUF_SZ 1580
@@ -95,7 +95,7 @@
t = t->next;
}
}
- bfin_mac_free(dma_handle, tx_desc);
+ bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM);
}
if (rx_desc) {
@@ -109,7 +109,7 @@
r = r->next;
}
}
- bfin_mac_free(dma_handle, rx_desc);
+ bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM);
}
}
@@ -126,13 +126,13 @@
#endif
tx_desc = bfin_mac_alloc(&dma_handle,
- sizeof(struct net_dma_desc_tx) *
+ sizeof(struct net_dma_desc_tx),
CONFIG_BFIN_TX_DESC_NUM);
if (tx_desc == NULL)
goto init_error;
rx_desc = bfin_mac_alloc(&dma_handle,
- sizeof(struct net_dma_desc_rx) *
+ sizeof(struct net_dma_desc_rx),
CONFIG_BFIN_RX_DESC_NUM);
if (rx_desc == NULL)
goto init_error;
diff --git a/drivers/net/bna/bnad.c b/drivers/net/bna/bnad.c
index 7d25a97..44e219c 100644
--- a/drivers/net/bna/bnad.c
+++ b/drivers/net/bna/bnad.c
@@ -1111,7 +1111,7 @@
struct bna_intr_info *intr_info)
{
int err = 0;
- unsigned long flags;
+ unsigned long irq_flags = 0, flags;
u32 irq;
irq_handler_t irq_handler;
@@ -1125,18 +1125,17 @@
if (bnad->cfg_flags & BNAD_CF_MSIX) {
irq_handler = (irq_handler_t)bnad_msix_mbox_handler;
irq = bnad->msix_table[bnad->msix_num - 1].vector;
- flags = 0;
intr_info->intr_type = BNA_INTR_T_MSIX;
intr_info->idl[0].vector = bnad->msix_num - 1;
} else {
irq_handler = (irq_handler_t)bnad_isr;
irq = bnad->pcidev->irq;
- flags = IRQF_SHARED;
+ irq_flags = IRQF_SHARED;
intr_info->intr_type = BNA_INTR_T_INTX;
/* intr_info->idl.vector = 0 ? */
}
spin_unlock_irqrestore(&bnad->bna_lock, flags);
-
+ flags = irq_flags;
sprintf(bnad->mbox_irq_name, "%s", BNAD_NAME);
/*
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 4b70311..74be989 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -49,6 +49,7 @@
#include <linux/zlib.h>
#include <linux/io.h>
#include <linux/stringify.h>
+#include <linux/vmalloc.h>
#define BNX2X_MAIN
#include "bnx2x.h"
@@ -4537,8 +4538,7 @@
if (bp->strm == NULL)
goto gunzip_nomem2;
- bp->strm->workspace = kmalloc(zlib_inflate_workspacesize(),
- GFP_KERNEL);
+ bp->strm->workspace = vmalloc(zlib_inflate_workspacesize());
if (bp->strm->workspace == NULL)
goto gunzip_nomem3;
@@ -4562,7 +4562,7 @@
static void bnx2x_gunzip_end(struct bnx2x *bp)
{
if (bp->strm) {
- kfree(bp->strm->workspace);
+ vfree(bp->strm->workspace);
kfree(bp->strm);
bp->strm = NULL;
}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 17b4dd9..63c22b0 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -388,6 +388,8 @@
return next;
}
+#define bond_queue_mapping(skb) (*(u16 *)((skb)->cb))
+
/**
* bond_dev_queue_xmit - Prepare skb for xmit.
*
@@ -400,6 +402,9 @@
{
skb->dev = slave_dev;
skb->priority = 1;
+
+ skb->queue_mapping = bond_queue_mapping(skb);
+
if (unlikely(netpoll_tx_running(slave_dev)))
bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
else
@@ -1292,6 +1297,7 @@
goto out;
np->dev = slave->dev;
+ strlcpy(np->dev_name, slave->dev->name, IFNAMSIZ);
err = __netpoll_setup(np);
if (err) {
kfree(np);
@@ -1422,9 +1428,9 @@
return features;
}
-#define BOND_VLAN_FEATURES (NETIF_F_ALL_TX_OFFLOADS | \
- NETIF_F_SOFT_FEATURES | \
- NETIF_F_LRO)
+#define BOND_VLAN_FEATURES (NETIF_F_ALL_CSUM | NETIF_F_SG | \
+ NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
+ NETIF_F_HIGHDMA | NETIF_F_LRO)
static void bond_compute_features(struct bonding *bond)
{
@@ -4206,6 +4212,7 @@
return res;
}
+
static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb)
{
/*
@@ -4216,6 +4223,11 @@
*/
u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
+ /*
+ * Save the original txq to restore before passing to the driver
+ */
+ bond_queue_mapping(skb) = skb->queue_mapping;
+
if (unlikely(txq >= dev->real_num_tx_queues)) {
do {
txq -= dev->real_num_tx_queues;
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 1d699e3..754df5e 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -36,7 +36,7 @@
config CAN_DEV
tristate "Platform CAN drivers with Netlink support"
depends on CAN
- default Y
+ default y
---help---
Enables the common framework for platform CAN drivers with Netlink
support. This is the standard library for CAN drivers.
@@ -45,7 +45,7 @@
config CAN_CALC_BITTIMING
bool "CAN bit-timing calculation"
depends on CAN_DEV
- default Y
+ default y
---help---
If enabled, CAN bit-timing parameters will be calculated for the
bit-rate specified via Netlink argument "bitrate" when the device
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 3f562ba..76bf589 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -2026,7 +2026,7 @@
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else
skb_checksum_none_assert(skb);
- skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
+ skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]);
if (unlikely(p->vlan_valid)) {
struct vlan_group *grp = pi->vlan_grp;
@@ -2145,7 +2145,7 @@
if (!complete)
return;
- skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
+ skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]);
if (unlikely(cpl->vlan_valid)) {
struct vlan_group *grp = pi->vlan_grp;
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index c445457..23179db 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -346,7 +346,7 @@
if (np->pdev->vendor == PCI_VENDOR_ID_DLINK) { /* D-Link Only */
/* Check CRC */
crc = ~ether_crc_le (256 - 4, sromdata);
- if (psrom->crc != crc) {
+ if (psrom->crc != cpu_to_le32(crc)) {
printk (KERN_ERR "%s: EEPROM data CRC error.\n",
dev->name);
return -1;
diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c
index 7a84e45..7583a95 100644
--- a/drivers/net/fs_enet/mac-fcc.c
+++ b/drivers/net/fs_enet/mac-fcc.c
@@ -105,7 +105,7 @@
goto out_ep;
fep->fcc.mem = (void __iomem *)cpm2_immr;
- fpi->dpram_offset = cpm_dpalloc(128, 8);
+ fpi->dpram_offset = cpm_dpalloc(128, 32);
if (IS_ERR_VALUE(fpi->dpram_offset)) {
ret = fpi->dpram_offset;
goto out_fcccp;
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index ff60b23..dfa55f9 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -10,7 +10,7 @@
* Maintainer: Kumar Gala
* Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
*
- * Copyright 2002-2009 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc.
* Copyright 2007 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
@@ -476,9 +476,6 @@
#endif
};
-unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
-unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
-
void lock_rx_qs(struct gfar_private *priv)
{
int i = 0x0;
@@ -868,28 +865,28 @@
rqfar--;
rqfcr = RQFCR_CLE | RQFCR_PID_MASK | RQFCR_CMP_EXACT;
- ftp_rqfpr[rqfar] = rqfpr;
- ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
rqfar--;
rqfcr = RQFCR_CMP_NOMATCH;
- ftp_rqfpr[rqfar] = rqfpr;
- ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
rqfar--;
rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_PARSE | RQFCR_CLE | RQFCR_AND;
rqfpr = class;
- ftp_rqfcr[rqfar] = rqfcr;
- ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
rqfar--;
rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_MASK | RQFCR_AND;
rqfpr = class;
- ftp_rqfcr[rqfar] = rqfcr;
- ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
return rqfar;
@@ -904,8 +901,8 @@
/* Default rule */
rqfcr = RQFCR_CMP_MATCH;
- ftp_rqfcr[rqfar] = rqfcr;
- ftp_rqfpr[rqfar] = rqfpr;
+ priv->ftp_rqfcr[rqfar] = rqfcr;
+ priv->ftp_rqfpr[rqfar] = rqfpr;
gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6);
@@ -921,8 +918,8 @@
/* Rest are masked rules */
rqfcr = RQFCR_CMP_NOMATCH;
for (i = 0; i < rqfar; i++) {
- ftp_rqfcr[i] = rqfcr;
- ftp_rqfpr[i] = rqfpr;
+ priv->ftp_rqfcr[i] = rqfcr;
+ priv->ftp_rqfpr[i] = rqfpr;
gfar_write_filer(priv, i, rqfcr, rqfpr);
}
}
@@ -2292,6 +2289,23 @@
return 0;
}
+/* Check if rx parser should be activated */
+void gfar_check_rx_parser_mode(struct gfar_private *priv)
+{
+ struct gfar __iomem *regs;
+ u32 tempval;
+
+ regs = priv->gfargrp[0].regs;
+
+ tempval = gfar_read(®s->rctrl);
+ /* If parse is no longer required, then disable parser */
+ if (tempval & RCTRL_REQ_PARSER)
+ tempval |= RCTRL_PRSDEP_INIT;
+ else
+ tempval &= ~RCTRL_PRSDEP_INIT;
+ gfar_write(®s->rctrl, tempval);
+}
+
/* Enables and disables VLAN insertion/extraction */
static void gfar_vlan_rx_register(struct net_device *dev,
@@ -2328,12 +2342,9 @@
/* Disable VLAN tag extraction */
tempval = gfar_read(®s->rctrl);
tempval &= ~RCTRL_VLEX;
- /* If parse is no longer required, then disable parser */
- if (tempval & RCTRL_REQ_PARSER)
- tempval |= RCTRL_PRSDEP_INIT;
- else
- tempval &= ~RCTRL_PRSDEP_INIT;
gfar_write(®s->rctrl, tempval);
+
+ gfar_check_rx_parser_mode(priv);
}
gfar_change_mtu(dev, dev->mtu);
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index fc86f51..440e69d 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -9,7 +9,7 @@
* Maintainer: Kumar Gala
* Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
*
- * Copyright 2002-2009 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009, 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -274,7 +274,7 @@
#define RCTRL_PROM 0x00000008
#define RCTRL_EMEN 0x00000002
#define RCTRL_REQ_PARSER (RCTRL_VLEX | RCTRL_IPCSEN | \
- RCTRL_TUCSEN)
+ RCTRL_TUCSEN | RCTRL_FILREN)
#define RCTRL_CHECKSUMMING (RCTRL_IPCSEN | RCTRL_TUCSEN | \
RCTRL_PRSDEP_INIT)
#define RCTRL_EXTHASH (RCTRL_GHTX)
@@ -1107,10 +1107,12 @@
/* HW time stamping enabled flag */
int hwts_rx_en;
int hwts_tx_en;
+
+ /*Filer table*/
+ unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
+ unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
};
-extern unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
-extern unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
static inline int gfar_has_errata(struct gfar_private *priv,
enum gfar_errata err)
@@ -1154,6 +1156,7 @@
unsigned long tx_mask, unsigned long rx_mask);
void gfar_init_sysfs(struct net_device *dev);
int gfar_set_features(struct net_device *dev, u32 features);
+extern void gfar_check_rx_parser_mode(struct gfar_private *priv);
extern const struct ethtool_ops gfar_ethtool_ops;
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 493d743..239e333 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -9,7 +9,7 @@
* Maintainer: Kumar Gala
* Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
*
- * Copyright 2003-2006, 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2003-2006, 2008-2009, 2011 Freescale Semiconductor, Inc.
*
* This software may be used and distributed according to
* the terms of the GNU Public License, Version 2, incorporated herein
@@ -609,15 +609,15 @@
if (ethflow & RXH_L2DA) {
fcr = RQFCR_PID_DAH |RQFCR_CMP_NOMATCH |
RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
fcr = RQFCR_PID_DAL | RQFCR_AND | RQFCR_CMP_NOMATCH |
RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
@@ -626,16 +626,16 @@
fcr = RQFCR_PID_VID | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
if (ethflow & RXH_IP_SRC) {
fcr = RQFCR_PID_SIA | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
@@ -643,8 +643,8 @@
if (ethflow & (RXH_IP_DST)) {
fcr = RQFCR_PID_DIA | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
@@ -652,8 +652,8 @@
if (ethflow & RXH_L3_PROTO) {
fcr = RQFCR_PID_L4P | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
@@ -661,8 +661,8 @@
if (ethflow & RXH_L4_B_0_1) {
fcr = RQFCR_PID_SPT | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
@@ -670,8 +670,8 @@
if (ethflow & RXH_L4_B_2_3) {
fcr = RQFCR_PID_DPT | RQFCR_CMP_NOMATCH | RQFCR_HASH |
RQFCR_AND | RQFCR_HASHTBL_0;
- ftp_rqfpr[priv->cur_filer_idx] = fpr;
- ftp_rqfcr[priv->cur_filer_idx] = fcr;
+ priv->ftp_rqfpr[priv->cur_filer_idx] = fpr;
+ priv->ftp_rqfcr[priv->cur_filer_idx] = fcr;
gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
priv->cur_filer_idx = priv->cur_filer_idx - 1;
}
@@ -705,12 +705,12 @@
}
for (i = 0; i < MAX_FILER_IDX + 1; i++) {
- local_rqfpr[j] = ftp_rqfpr[i];
- local_rqfcr[j] = ftp_rqfcr[i];
+ local_rqfpr[j] = priv->ftp_rqfpr[i];
+ local_rqfcr[j] = priv->ftp_rqfcr[i];
j--;
- if ((ftp_rqfcr[i] == (RQFCR_PID_PARSE |
+ if ((priv->ftp_rqfcr[i] == (RQFCR_PID_PARSE |
RQFCR_CLE |RQFCR_AND)) &&
- (ftp_rqfpr[i] == cmp_rqfpr))
+ (priv->ftp_rqfpr[i] == cmp_rqfpr))
break;
}
@@ -724,20 +724,22 @@
* if it was already programmed, we need to overwrite these rules
*/
for (l = i+1; l < MAX_FILER_IDX; l++) {
- if ((ftp_rqfcr[l] & RQFCR_CLE) &&
- !(ftp_rqfcr[l] & RQFCR_AND)) {
- ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT |
+ if ((priv->ftp_rqfcr[l] & RQFCR_CLE) &&
+ !(priv->ftp_rqfcr[l] & RQFCR_AND)) {
+ priv->ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT |
RQFCR_HASHTBL_0 | RQFCR_PID_MASK;
- ftp_rqfpr[l] = FPR_FILER_MASK;
- gfar_write_filer(priv, l, ftp_rqfcr[l], ftp_rqfpr[l]);
+ priv->ftp_rqfpr[l] = FPR_FILER_MASK;
+ gfar_write_filer(priv, l, priv->ftp_rqfcr[l],
+ priv->ftp_rqfpr[l]);
break;
}
- if (!(ftp_rqfcr[l] & RQFCR_CLE) && (ftp_rqfcr[l] & RQFCR_AND))
+ if (!(priv->ftp_rqfcr[l] & RQFCR_CLE) &&
+ (priv->ftp_rqfcr[l] & RQFCR_AND))
continue;
else {
- local_rqfpr[j] = ftp_rqfpr[l];
- local_rqfcr[j] = ftp_rqfcr[l];
+ local_rqfpr[j] = priv->ftp_rqfpr[l];
+ local_rqfcr[j] = priv->ftp_rqfcr[l];
j--;
}
}
@@ -750,8 +752,8 @@
/* Write back the popped out rules again */
for (k = j+1; k < MAX_FILER_IDX; k++) {
- ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k];
- ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k];
+ priv->ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k];
+ priv->ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k];
gfar_write_filer(priv, priv->cur_filer_idx,
local_rqfcr[k], local_rqfpr[k]);
if (!priv->cur_filer_idx)
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index f181304..672f096 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -1015,11 +1015,10 @@
return -EINVAL;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ GRETH_REGSAVE(regs->esa_msb, dev->dev_addr[0] << 8 | dev->dev_addr[1]);
+ GRETH_REGSAVE(regs->esa_lsb, dev->dev_addr[2] << 24 | dev->dev_addr[3] << 16 |
+ dev->dev_addr[4] << 8 | dev->dev_addr[5]);
- GRETH_REGSAVE(regs->esa_msb, addr->sa_data[0] << 8 | addr->sa_data[1]);
- GRETH_REGSAVE(regs->esa_lsb,
- addr->sa_data[2] << 24 | addr->
- sa_data[3] << 16 | addr->sa_data[4] << 8 | addr->sa_data[5]);
return 0;
}
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 3e5d0b6..0d28378 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -692,10 +692,10 @@
{
struct sixpack *sp;
- write_lock(&disc_data_lock);
+ write_lock_bh(&disc_data_lock);
sp = tty->disc_data;
tty->disc_data = NULL;
- write_unlock(&disc_data_lock);
+ write_unlock_bh(&disc_data_lock);
if (!sp)
return;
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 4c62839..bc02968 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -813,10 +813,10 @@
{
struct mkiss *ax;
- write_lock(&disc_data_lock);
+ write_lock_bh(&disc_data_lock);
ax = tty->disc_data;
tty->disc_data = NULL;
- write_unlock(&disc_data_lock);
+ write_unlock_bh(&disc_data_lock);
if (!ax)
return;
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 8e10d2f..c3ecb11 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1580,12 +1580,12 @@
hp100_outl(ringptr->pdl_paddr, TX_PDA_L); /* Low Prio. Queue */
lp->txrcommit++;
- spin_unlock_irqrestore(&lp->lock, flags);
- /* Update statistics */
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
+ spin_unlock_irqrestore(&lp->lock, flags);
+
return NETDEV_TX_OK;
drop:
diff --git a/drivers/net/hplance.c b/drivers/net/hplance.c
index b6060f7..a900d5b 100644
--- a/drivers/net/hplance.c
+++ b/drivers/net/hplance.c
@@ -135,7 +135,7 @@
}
/* Initialise a single lance board at the given DIO device */
-static void __init hplance_init(struct net_device *dev, struct dio_dev *d)
+static void __devinit hplance_init(struct net_device *dev, struct dio_dev *d)
{
unsigned long va = (d->resource.start + DIO_VIRADDRBASE);
struct hplance_private *lp;
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 18fccf9..2c28621 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -2373,6 +2373,9 @@
}
#endif /* CONFIG_PCI_IOV */
adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
+ /* i350 cannot do RSS and SR-IOV at the same time */
+ if (hw->mac.type == e1000_i350 && adapter->vfs_allocated_count)
+ adapter->rss_queues = 1;
/*
* if rss_queues > 4 or vfs are going to be allocated with rss_queues
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index b78be08..60f46bc 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -140,7 +140,7 @@
module_param(mtu, int, 0);
module_param(debug, int, 0);
module_param(rx_copybreak, int, 0);
-module_param(dspcfg_workaround, int, 1);
+module_param(dspcfg_workaround, int, 0);
module_param_array(options, int, NULL, 0);
module_param_array(full_duplex, int, NULL, 0);
MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)");
@@ -2028,8 +2028,8 @@
np->rx_ring[i].cmd_status = 0;
np->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
if (np->rx_skbuff[i]) {
- pci_unmap_single(np->pci_dev,
- np->rx_dma[i], buflen,
+ pci_unmap_single(np->pci_dev, np->rx_dma[i],
+ buflen + NATSEMI_PADDING,
PCI_DMA_FROMDEVICE);
dev_kfree_skb(np->rx_skbuff[i]);
}
@@ -2360,7 +2360,8 @@
PCI_DMA_FROMDEVICE);
} else {
pci_unmap_single(np->pci_dev, np->rx_dma[entry],
- buflen, PCI_DMA_FROMDEVICE);
+ buflen + NATSEMI_PADDING,
+ PCI_DMA_FROMDEVICE);
skb_put(skb = np->rx_skbuff[entry], pkt_len);
np->rx_skbuff[entry] = NULL;
}
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index b644383..c0788a3 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -1965,11 +1965,11 @@
netxen_tso_check(netdev, tx_ring, first_desc, skb);
- netxen_nic_update_cmd_producer(adapter, tx_ring);
-
adapter->stats.txbytes += skb->len;
adapter->stats.xmitcalled++;
+ netxen_nic_update_cmd_producer(adapter, tx_ring);
+
return NETDEV_TX_OK;
drop_packet:
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 392a6c4..a702443 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -58,6 +58,7 @@
config BCM63XX_PHY
tristate "Drivers for Broadcom 63xx SOCs internal PHY"
+ depends on BCM63XX
---help---
Currently supports the 6348 and 6358 PHYs.
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index b0c9522..2cd8dc5 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -543,11 +543,20 @@
/* time stamping methods */
-static void decode_evnt(struct dp83640_private *dp83640,
- struct phy_txts *phy_txts, u16 ests)
+static int decode_evnt(struct dp83640_private *dp83640,
+ void *data, u16 ests)
{
+ struct phy_txts *phy_txts;
struct ptp_clock_event event;
int words = (ests >> EVNT_TS_LEN_SHIFT) & EVNT_TS_LEN_MASK;
+ u16 ext_status = 0;
+
+ if (ests & MULT_EVNT) {
+ ext_status = *(u16 *) data;
+ data += sizeof(ext_status);
+ }
+
+ phy_txts = data;
switch (words) { /* fall through in every case */
case 3:
@@ -565,6 +574,9 @@
event.timestamp = phy2txts(&dp83640->edata);
ptp_clock_event(dp83640->clock->ptp_clock, &event);
+
+ words = ext_status ? words + 2 : words + 1;
+ return words * sizeof(u16);
}
static void decode_rxts(struct dp83640_private *dp83640,
@@ -643,9 +655,7 @@
} else if (PSF_EVNT == type && len >= sizeof(*phy_txts)) {
- phy_txts = (struct phy_txts *) ptr;
- decode_evnt(dp83640, phy_txts, ests);
- size = sizeof(*phy_txts);
+ size = decode_evnt(dp83640, ptr, ests);
} else {
size = 0;
@@ -1034,8 +1044,8 @@
if (is_status_frame(skb, type)) {
decode_status_frame(dp83640, skb);
- /* Let the stack drop this frame. */
- return false;
+ kfree_skb(skb);
+ return true;
}
SKB_PTP_TYPE(skb) = type;
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index a1b82c9..c554a39 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -523,7 +523,7 @@
#define PUT_BYTE(ap, buf, c, islcp) do { \
if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\
*buf++ = PPP_ESCAPE; \
- *buf++ = c ^ 0x20; \
+ *buf++ = c ^ PPP_TRANS; \
} else \
*buf++ = c; \
} while (0)
@@ -896,7 +896,7 @@
sp = skb_put(skb, n);
memcpy(sp, buf, n);
if (ap->state & SC_ESCAPE) {
- sp[0] ^= 0x20;
+ sp[0] ^= PPP_TRANS;
ap->state &= ~SC_ESCAPE;
}
}
diff --git a/drivers/net/ppp_deflate.c b/drivers/net/ppp_deflate.c
index 31e9407..1dbdf82 100644
--- a/drivers/net/ppp_deflate.c
+++ b/drivers/net/ppp_deflate.c
@@ -305,7 +305,7 @@
if (state) {
zlib_inflateEnd(&state->strm);
- kfree(state->strm.workspace);
+ vfree(state->strm.workspace);
kfree(state);
}
}
@@ -345,8 +345,7 @@
state->w_size = w_size;
state->strm.next_out = NULL;
- state->strm.workspace = kmalloc(zlib_inflate_workspacesize(),
- GFP_KERNEL|__GFP_REPEAT);
+ state->strm.workspace = vmalloc(zlib_inflate_workspacesize());
if (state->strm.workspace == NULL)
goto out_free;
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 718879b..bc9a4bb 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -348,8 +348,9 @@
/* Only look at sockets that are using this specific device. */
switch (event) {
+ case NETDEV_CHANGEADDR:
case NETDEV_CHANGEMTU:
- /* A change in mtu is a bad thing, requiring
+ /* A change in mtu or address is a bad thing, requiring
* LCP re-negotiation.
*/
diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c
index 89f7540..5f597ca5 100644
--- a/drivers/net/pxa168_eth.c
+++ b/drivers/net/pxa168_eth.c
@@ -1273,7 +1273,7 @@
wmb();
wrl(pep, SDMA_CMD, SDMA_CMD_TXDH | SDMA_CMD_ERD);
- stats->tx_bytes += skb->len;
+ stats->tx_bytes += length;
stats->tx_packets++;
dev->trans_start = jiffies;
if (pep->tx_ring_size - pep->tx_desc_count <= 1) {
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index e965661..a5d9fbf 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -1406,6 +1406,7 @@
for (loop = 0; loop < que->no_ops; loop++) {
QLCNIC_WR_DUMP_REG(que->sel_addr, base, que_id);
+ addr = que->read_addr;
for (i = 0; i < cnt; i++) {
QLCNIC_RD_DUMP_REG(addr, base, &data);
*buffer++ = cpu_to_le32(data);
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index 3ab7d2c..0f6af5c 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -2159,6 +2159,7 @@
nf = &pbuf->frag_array[0];
pci_unmap_single(pdev, nf->dma, skb_headlen(skb), PCI_DMA_TODEVICE);
+ pbuf->skb = NULL;
}
static inline void
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index d328507..ca306fd 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -16,7 +16,7 @@
*/
#define DRV_NAME "qlge"
#define DRV_STRING "QLogic 10 Gigabit PCI-E Ethernet Driver "
-#define DRV_VERSION "v1.00.00.27.00.00-01"
+#define DRV_VERSION "v1.00.00.29.00.00-01"
#define WQ_ADDR_ALIGN 0x3 /* 4 byte alignment */
@@ -1996,6 +1996,7 @@
QL_LB_LINK_UP = 10,
QL_FRC_COREDUMP = 11,
QL_EEH_FATAL = 12,
+ QL_ASIC_RECOVERY = 14, /* We are in ascic recovery. */
};
/* link_status bit definitions */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 930ae45..6b4ff97 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -2152,6 +2152,10 @@
* thread
*/
clear_bit(QL_ADAPTER_UP, &qdev->flags);
+ /* Set asic recovery bit to indicate reset process that we are
+ * in fatal error recovery process rather than normal close
+ */
+ set_bit(QL_ASIC_RECOVERY, &qdev->flags);
queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0);
}
@@ -2166,23 +2170,20 @@
return;
case CAM_LOOKUP_ERR_EVENT:
- netif_err(qdev, link, qdev->ndev,
- "Multiple CAM hits lookup occurred.\n");
- netif_err(qdev, drv, qdev->ndev,
- "This event shouldn't occur.\n");
+ netdev_err(qdev->ndev, "Multiple CAM hits lookup occurred.\n");
+ netdev_err(qdev->ndev, "This event shouldn't occur.\n");
ql_queue_asic_error(qdev);
return;
case SOFT_ECC_ERROR_EVENT:
- netif_err(qdev, rx_err, qdev->ndev,
- "Soft ECC error detected.\n");
+ netdev_err(qdev->ndev, "Soft ECC error detected.\n");
ql_queue_asic_error(qdev);
break;
case PCI_ERR_ANON_BUF_RD:
- netif_err(qdev, rx_err, qdev->ndev,
- "PCI error occurred when reading anonymous buffers from rx_ring %d.\n",
- ib_ae_rsp->q_id);
+ netdev_err(qdev->ndev, "PCI error occurred when reading "
+ "anonymous buffers from rx_ring %d.\n",
+ ib_ae_rsp->q_id);
ql_queue_asic_error(qdev);
break;
@@ -2437,11 +2438,10 @@
*/
if (var & STS_FE) {
ql_queue_asic_error(qdev);
- netif_err(qdev, intr, qdev->ndev,
- "Got fatal error, STS = %x.\n", var);
+ netdev_err(qdev->ndev, "Got fatal error, STS = %x.\n", var);
var = ql_read32(qdev, ERR_STS);
- netif_err(qdev, intr, qdev->ndev,
- "Resetting chip. Error Status Register = 0x%x\n", var);
+ netdev_err(qdev->ndev, "Resetting chip. "
+ "Error Status Register = 0x%x\n", var);
return IRQ_HANDLED;
}
@@ -3818,11 +3818,17 @@
end_jiffies = jiffies +
max((unsigned long)1, usecs_to_jiffies(30));
- /* Stop management traffic. */
- ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP);
+ /* Check if bit is set then skip the mailbox command and
+ * clear the bit, else we are in normal reset process.
+ */
+ if (!test_bit(QL_ASIC_RECOVERY, &qdev->flags)) {
+ /* Stop management traffic. */
+ ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP);
- /* Wait for the NIC and MGMNT FIFOs to empty. */
- ql_wait_fifo_empty(qdev);
+ /* Wait for the NIC and MGMNT FIFOs to empty. */
+ ql_wait_fifo_empty(qdev);
+ } else
+ clear_bit(QL_ASIC_RECOVERY, &qdev->flags);
ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 200a363..0ffec46 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -677,9 +677,11 @@
if (status & RX_FIFO_FULL)
dev->stats.rx_fifo_errors++;
- /* Mask off RX interrupt */
- misr &= ~RX_INTS;
- napi_schedule(&lp->napi);
+ if (likely(napi_schedule_prep(&lp->napi))) {
+ /* Mask off RX interrupt */
+ misr &= ~RX_INTS;
+ __napi_schedule(&lp->napi);
+ }
}
/* TX interrupt request */
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index ef1ce2e..5990621 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -742,7 +742,7 @@
msleep(2);
for (i = 0; i < 5; i++) {
udelay(100);
- if (!(RTL_R32(ERIDR) & ERIAR_FLAG))
+ if (!(RTL_R32(ERIAR) & ERIAR_FLAG))
break;
}
@@ -1621,7 +1621,7 @@
*
* (RTL_R32(TxConfig) & 0x700000) == 0x200000 ? 8101Eb : 8101Ec
*/
- static const struct {
+ static const struct rtl_mac_info {
u32 mask;
u32 val;
int mac_version;
@@ -1689,7 +1689,8 @@
/* Catch-all */
{ 0x00000000, 0x00000000, RTL_GIGA_MAC_NONE }
- }, *p = mac_info;
+ };
+ const struct rtl_mac_info *p = mac_info;
u32 reg;
reg = RTL_R32(TxConfig);
@@ -3681,7 +3682,7 @@
static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
{
- static const struct {
+ static const struct rtl_cfg2_info {
u32 mac_version;
u32 clk;
u32 val;
@@ -3690,7 +3691,8 @@
{ RTL_GIGA_MAC_VER_05, PCI_Clock_66MHz, 0x000fffff },
{ RTL_GIGA_MAC_VER_06, PCI_Clock_33MHz, 0x00ffff00 }, // 8110SCe
{ RTL_GIGA_MAC_VER_06, PCI_Clock_66MHz, 0x00ffffff }
- }, *p = cfg2_info;
+ };
+ const struct rtl_cfg2_info *p = cfg2_info;
unsigned int i;
u32 clk;
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index 77c5092..5d3436d 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -378,7 +378,7 @@
static void rionet_remove(struct rio_dev *rdev)
{
- struct net_device *ndev = NULL;
+ struct net_device *ndev = rio_get_drvdata(rdev);
struct rionet_peer *peer, *tmp;
free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ?
@@ -433,22 +433,12 @@
.ndo_set_mac_address = eth_mac_addr,
};
-static int rionet_setup_netdev(struct rio_mport *mport)
+static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev)
{
int rc = 0;
- struct net_device *ndev = NULL;
struct rionet_private *rnet;
u16 device_id;
- /* Allocate our net_device structure */
- ndev = alloc_etherdev(sizeof(struct rionet_private));
- if (ndev == NULL) {
- printk(KERN_INFO "%s: could not allocate ethernet device.\n",
- DRV_NAME);
- rc = -ENOMEM;
- goto out;
- }
-
rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL,
mport->sys_size ? __fls(sizeof(void *)) + 4 : 0);
if (!rionet_active) {
@@ -504,11 +494,21 @@
int rc = -ENODEV;
u32 lpef, lsrc_ops, ldst_ops;
struct rionet_peer *peer;
+ struct net_device *ndev = NULL;
/* If local device is not rionet capable, give up quickly */
if (!rionet_capable)
goto out;
+ /* Allocate our net_device structure */
+ ndev = alloc_etherdev(sizeof(struct rionet_private));
+ if (ndev == NULL) {
+ printk(KERN_INFO "%s: could not allocate ethernet device.\n",
+ DRV_NAME);
+ rc = -ENOMEM;
+ goto out;
+ }
+
/*
* First time through, make sure local device is rionet
* capable, setup netdev, and set flags so this is skipped
@@ -529,7 +529,7 @@
goto out;
}
- rc = rionet_setup_netdev(rdev->net->hport);
+ rc = rionet_setup_netdev(rdev->net->hport, ndev);
rionet_check = 1;
}
@@ -546,6 +546,8 @@
list_add_tail(&peer->node, &rionet_peers);
}
+ rio_set_drvdata(rdev, ndev);
+
out:
return rc;
}
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 8a72a97..1f3f7b4 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -140,6 +140,8 @@
.tpauser = 1,
.hw_swap = 1,
.no_ade = 1,
+ .rpadir = 1,
+ .rpadir_value = 2 << 16,
};
#define SH_GIGA_ETH_BASE 0xfee00000
@@ -1184,8 +1186,8 @@
mdp->cd->set_rate(ndev);
}
if (mdp->link == PHY_DOWN) {
- sh_eth_write(ndev, (sh_eth_read(ndev, ECMR) & ~ECMR_TXF)
- | ECMR_DM, ECMR);
+ sh_eth_write(ndev,
+ (sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR);
new_state = 1;
mdp->link = phydev->link;
}
diff --git a/drivers/net/slip.c b/drivers/net/slip.c
index 8ec1a9a..2f110fb 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip.c
@@ -182,11 +182,11 @@
#ifdef SL_INCLUDE_CSLIP
cbuff = xchg(&sl->cbuff, cbuff);
slcomp = xchg(&sl->slcomp, slcomp);
+#endif
#ifdef CONFIG_SLIP_MODE_SLIP6
sl->xdata = 0;
sl->xbits = 0;
#endif
-#endif
spin_unlock_bh(&sl->lock);
err = 0;
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index dc4805f..f628574 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -2400,8 +2400,10 @@
{ .compatible = "smsc,lan91c94", },
{ .compatible = "smsc,lan91c111", },
{},
-}
+};
MODULE_DEVICE_TABLE(of, smc91x_match);
+#else
+#define smc91x_match NULL
#endif
static struct dev_pm_ops smc_drv_pm_ops = {
@@ -2416,9 +2418,7 @@
.name = CARDNAME,
.owner = THIS_MODULE,
.pm = &smc_drv_pm_ops,
-#ifdef CONFIG_OF
.of_match_table = smc91x_match,
-#endif
},
};
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 4685127..9a21ca3 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -879,7 +879,6 @@
txptr = db->tx_remove_ptr;
while(db->tx_packet_cnt) {
tdes0 = le32_to_cpu(txptr->tdes0);
- pr_debug("tdes0=%x\n", tdes0);
if (tdes0 & 0x80000000)
break;
@@ -889,7 +888,6 @@
/* Transmit statistic counter */
if ( tdes0 != 0x7fffffff ) {
- pr_debug("tdes0=%x\n", tdes0);
dev->stats.collisions += (tdes0 >> 3) & 0xf;
dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
if (tdes0 & TDES0_ERR_MASK) {
@@ -986,7 +984,6 @@
/* error summary bit check */
if (rdes0 & 0x8000) {
/* This is a error packet */
- pr_debug("rdes0: %x\n", rdes0);
dev->stats.rx_errors++;
if (rdes0 & 1)
dev->stats.rx_fifo_errors++;
@@ -1638,7 +1635,6 @@
else /* DM9102/DM9102A */
phy_mode = phy_read(db->ioaddr,
db->phy_addr, 17, db->chip_id) & 0xf000;
- pr_debug("Phy_mode %x\n", phy_mode);
switch (phy_mode) {
case 0x1000: db->op_mode = DMFE_10MHF; break;
case 0x2000: db->op_mode = DMFE_10MFD; break;
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 74e9405..5235f48 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -460,7 +460,23 @@
return (features & tun->set_features) | (features & ~TUN_USER_FEATURES);
}
-
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void tun_poll_controller(struct net_device *dev)
+{
+ /*
+ * Tun only receives frames when:
+ * 1) the char device endpoint gets data from user space
+ * 2) the tun socket gets a sendmsg call from user space
+ * Since both of those are syncronous operations, we are guaranteed
+ * never to have pending data when we poll for it
+ * so theres nothing to do here but return.
+ * We need this though so netpoll recognizes us as an interface that
+ * supports polling, which enables bridge devices in virt setups to
+ * still use netconsole
+ */
+ return;
+}
+#endif
static const struct net_device_ops tun_netdev_ops = {
.ndo_uninit = tun_net_uninit,
.ndo_open = tun_net_open,
@@ -468,6 +484,9 @@
.ndo_start_xmit = tun_net_xmit,
.ndo_change_mtu = tun_net_change_mtu,
.ndo_fix_features = tun_net_fix_features,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = tun_poll_controller,
+#endif
};
static const struct net_device_ops tap_netdev_ops = {
@@ -480,6 +499,9 @@
.ndo_set_multicast_list = tun_net_mclist,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = tun_poll_controller,
+#endif
};
/* Initialize net device. */
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 9d4f911..84d4608 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -385,6 +385,16 @@
router with USB ethernet port. This driver is for routers only,
it will not work with ADSL modems (use cxacru driver instead).
+config USB_NET_KALMIA
+ tristate "Samsung Kalmia based LTE USB modem"
+ depends on USB_USBNET
+ help
+ Choose this option if you have a Samsung Kalmia based USB modem
+ as Samsung GT-B3730.
+
+ To compile this driver as a module, choose M here: the
+ module will be called kalmia.
+
config USB_HSO
tristate "Option USB High Speed Mobile Devices"
depends on USB && RFKILL
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index c7ec8a5..c203fa2 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -23,6 +23,7 @@
obj-$(CONFIG_USB_USBNET) += usbnet.o
obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o
obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o
+obj-$(CONFIG_USB_NET_KALMIA) += kalmia.o
obj-$(CONFIG_USB_IPHETH) += ipheth.o
obj-$(CONFIG_USB_SIERRA_NET) += sierra_net.o
obj-$(CONFIG_USB_NET_CX82310_ETH) += cx82310_eth.o
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 387ca43..304fe78 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2421,10 +2421,8 @@
remove_net_device(hso_net->parent);
- if (hso_net->net) {
+ if (hso_net->net)
unregister_netdev(hso_net->net);
- free_netdev(hso_net->net);
- }
/* start freeing */
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
@@ -2436,6 +2434,9 @@
kfree(hso_net->mux_bulk_tx_buf);
hso_net->mux_bulk_tx_buf = NULL;
+ if (hso_net->net)
+ free_netdev(hso_net->net);
+
kfree(hso_dev);
}
diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c
new file mode 100644
index 0000000..a9b6c63
--- /dev/null
+++ b/drivers/net/usb/kalmia.c
@@ -0,0 +1,392 @@
+/*
+ * USB network interface driver for Samsung Kalmia based LTE USB modem like the
+ * Samsung GT-B3730 and GT-B3710.
+ *
+ * Copyright (C) 2011 Marius Bjoernstad Kotsbak <marius@kotsbak.com>
+ *
+ * Sponsored by Quicklink Video Distribution Services Ltd.
+ *
+ * Based on the cdc_eem module.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/gfp.h>
+
+/*
+ * The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control
+ * handled by the "option" module and an ethernet data port handled by this
+ * module.
+ *
+ * The stick must first be switched into modem mode by usb_modeswitch
+ * or similar tool. Then the modem gets sent two initialization packets by
+ * this module, which gives the MAC address of the device. User space can then
+ * connect the modem using AT commands through the ACM port and then use
+ * DHCP on the network interface exposed by this module. Network packets are
+ * sent to and from the modem in a proprietary format discovered after watching
+ * the behavior of the windows driver for the modem.
+ *
+ * More information about the use of the modem is available in usb_modeswitch
+ * forum and the project page:
+ *
+ * http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465
+ * https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver
+ */
+
+/* #define DEBUG */
+/* #define VERBOSE */
+
+#define KALMIA_HEADER_LENGTH 6
+#define KALMIA_ALIGN_SIZE 4
+#define KALMIA_USB_TIMEOUT 10000
+
+/*-------------------------------------------------------------------------*/
+
+static int
+kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len,
+ u8 *buffer, u8 expected_len)
+{
+ int act_len;
+ int status;
+
+ netdev_dbg(dev->net, "Sending init packet");
+
+ status = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 0x02),
+ init_msg, init_msg_len, &act_len, KALMIA_USB_TIMEOUT);
+ if (status != 0) {
+ netdev_err(dev->net,
+ "Error sending init packet. Status %i, length %i\n",
+ status, act_len);
+ return status;
+ }
+ else if (act_len != init_msg_len) {
+ netdev_err(dev->net,
+ "Did not send all of init packet. Bytes sent: %i",
+ act_len);
+ }
+ else {
+ netdev_dbg(dev->net, "Successfully sent init packet.");
+ }
+
+ status = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, 0x81),
+ buffer, expected_len, &act_len, KALMIA_USB_TIMEOUT);
+
+ if (status != 0)
+ netdev_err(dev->net,
+ "Error receiving init result. Status %i, length %i\n",
+ status, act_len);
+ else if (act_len != expected_len)
+ netdev_err(dev->net, "Unexpected init result length: %i\n",
+ act_len);
+
+ return status;
+}
+
+static int
+kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr)
+{
+ const static char init_msg_1[] =
+ { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00,
+ 0x00, 0x00 };
+ const static char init_msg_2[] =
+ { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4,
+ 0x00, 0x00 };
+ const static int buflen = 28;
+ char *usb_buf;
+ int status;
+
+ usb_buf = kmalloc(buflen, GFP_DMA | GFP_KERNEL);
+ if (!usb_buf)
+ return -ENOMEM;
+
+ memcpy(usb_buf, init_msg_1, 12);
+ status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1)
+ / sizeof(init_msg_1[0]), usb_buf, 24);
+ if (status != 0)
+ return status;
+
+ memcpy(usb_buf, init_msg_2, 12);
+ status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2)
+ / sizeof(init_msg_2[0]), usb_buf, 28);
+ if (status != 0)
+ return status;
+
+ memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN);
+
+ kfree(usb_buf);
+ return status;
+}
+
+static int
+kalmia_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int status;
+ u8 ethernet_addr[ETH_ALEN];
+
+ /* Don't bind to AT command interface */
+ if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
+ return -EINVAL;
+
+ dev->in = usb_rcvbulkpipe(dev->udev, 0x81 & USB_ENDPOINT_NUMBER_MASK);
+ dev->out = usb_sndbulkpipe(dev->udev, 0x02 & USB_ENDPOINT_NUMBER_MASK);
+ dev->status = NULL;
+
+ dev->net->hard_header_len += KALMIA_HEADER_LENGTH;
+ dev->hard_mtu = 1400;
+ dev->rx_urb_size = dev->hard_mtu * 10; // Found as optimal after testing
+
+ status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr);
+
+ if (status < 0) {
+ usb_set_intfdata(intf, NULL);
+ usb_driver_release_interface(driver_of(intf), intf);
+ return status;
+ }
+
+ memcpy(dev->net->dev_addr, ethernet_addr, ETH_ALEN);
+ memcpy(dev->net->perm_addr, ethernet_addr, ETH_ALEN);
+
+ return status;
+}
+
+static struct sk_buff *
+kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+ struct sk_buff *skb2 = NULL;
+ u16 content_len;
+ unsigned char *header_start;
+ unsigned char ether_type_1, ether_type_2;
+ u8 remainder, padlen = 0;
+
+ if (!skb_cloned(skb)) {
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+
+ if ((tailroom >= KALMIA_ALIGN_SIZE) && (headroom
+ >= KALMIA_HEADER_LENGTH))
+ goto done;
+
+ if ((headroom + tailroom) > (KALMIA_HEADER_LENGTH
+ + KALMIA_ALIGN_SIZE)) {
+ skb->data = memmove(skb->head + KALMIA_HEADER_LENGTH,
+ skb->data, skb->len);
+ skb_set_tail_pointer(skb, skb->len);
+ goto done;
+ }
+ }
+
+ skb2 = skb_copy_expand(skb, KALMIA_HEADER_LENGTH,
+ KALMIA_ALIGN_SIZE, flags);
+ if (!skb2)
+ return NULL;
+
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+
+done:
+ header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
+ ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12];
+ ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13];
+
+ netdev_dbg(dev->net, "Sending etherType: %02x%02x", ether_type_1,
+ ether_type_2);
+
+ /* According to empiric data for data packages */
+ header_start[0] = 0x57;
+ header_start[1] = 0x44;
+ content_len = skb->len - KALMIA_HEADER_LENGTH;
+
+ put_unaligned_le16(content_len, &header_start[2]);
+ header_start[4] = ether_type_1;
+ header_start[5] = ether_type_2;
+
+ /* Align to 4 bytes by padding with zeros */
+ remainder = skb->len % KALMIA_ALIGN_SIZE;
+ if (remainder > 0) {
+ padlen = KALMIA_ALIGN_SIZE - remainder;
+ memset(skb_put(skb, padlen), 0, padlen);
+ }
+
+ netdev_dbg(
+ dev->net,
+ "Sending package with length %i and padding %i. Header: %02x:%02x:%02x:%02x:%02x:%02x.",
+ content_len, padlen, header_start[0], header_start[1],
+ header_start[2], header_start[3], header_start[4],
+ header_start[5]);
+
+ return skb;
+}
+
+static int
+kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ /*
+ * Our task here is to strip off framing, leaving skb with one
+ * data frame for the usbnet framework code to process.
+ */
+ const static u8 HEADER_END_OF_USB_PACKET[] =
+ { 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 };
+ const static u8 EXPECTED_UNKNOWN_HEADER_1[] =
+ { 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 };
+ const static u8 EXPECTED_UNKNOWN_HEADER_2[] =
+ { 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 };
+ int i = 0;
+
+ /* incomplete header? */
+ if (skb->len < KALMIA_HEADER_LENGTH)
+ return 0;
+
+ do {
+ struct sk_buff *skb2 = NULL;
+ u8 *header_start;
+ u16 usb_packet_length, ether_packet_length;
+ int is_last;
+
+ header_start = skb->data;
+
+ if (unlikely(header_start[0] != 0x57 || header_start[1] != 0x44)) {
+ if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1,
+ sizeof(EXPECTED_UNKNOWN_HEADER_1)) || !memcmp(
+ header_start, EXPECTED_UNKNOWN_HEADER_2,
+ sizeof(EXPECTED_UNKNOWN_HEADER_2))) {
+ netdev_dbg(
+ dev->net,
+ "Received expected unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
+ header_start[0], header_start[1],
+ header_start[2], header_start[3],
+ header_start[4], header_start[5],
+ skb->len - KALMIA_HEADER_LENGTH);
+ }
+ else {
+ netdev_err(
+ dev->net,
+ "Received unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
+ header_start[0], header_start[1],
+ header_start[2], header_start[3],
+ header_start[4], header_start[5],
+ skb->len - KALMIA_HEADER_LENGTH);
+ return 0;
+ }
+ }
+ else
+ netdev_dbg(
+ dev->net,
+ "Received header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
+ header_start[0], header_start[1], header_start[2],
+ header_start[3], header_start[4], header_start[5],
+ skb->len - KALMIA_HEADER_LENGTH);
+
+ /* subtract start header and end header */
+ usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH);
+ ether_packet_length = get_unaligned_le16(&header_start[2]);
+ skb_pull(skb, KALMIA_HEADER_LENGTH);
+
+ /* Some small packets misses end marker */
+ if (usb_packet_length < ether_packet_length) {
+ ether_packet_length = usb_packet_length
+ + KALMIA_HEADER_LENGTH;
+ is_last = true;
+ }
+ else {
+ netdev_dbg(dev->net, "Correct package length #%i", i
+ + 1);
+
+ is_last = (memcmp(skb->data + ether_packet_length,
+ HEADER_END_OF_USB_PACKET,
+ sizeof(HEADER_END_OF_USB_PACKET)) == 0);
+ if (!is_last) {
+ header_start = skb->data + ether_packet_length;
+ netdev_dbg(
+ dev->net,
+ "End header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n",
+ header_start[0], header_start[1],
+ header_start[2], header_start[3],
+ header_start[4], header_start[5],
+ skb->len - KALMIA_HEADER_LENGTH);
+ }
+ }
+
+ if (is_last) {
+ skb2 = skb;
+ }
+ else {
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!skb2))
+ return 0;
+ }
+
+ skb_trim(skb2, ether_packet_length);
+
+ if (is_last) {
+ return 1;
+ }
+ else {
+ usbnet_skb_return(dev, skb2);
+ skb_pull(skb, ether_packet_length);
+ }
+
+ i++;
+ }
+ while (skb->len);
+
+ return 1;
+}
+
+static const struct driver_info kalmia_info = {
+ .description = "Samsung Kalmia LTE USB dongle",
+ .flags = FLAG_WWAN,
+ .bind = kalmia_bind,
+ .rx_fixup = kalmia_rx_fixup,
+ .tx_fixup = kalmia_tx_fixup
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+ /* The unswitched USB ID, to get the module auto loaded: */
+ { USB_DEVICE(0x04e8, 0x689a) },
+ /* The stick swithed into modem (by e.g. usb_modeswitch): */
+ { USB_DEVICE(0x04e8, 0x6889),
+ .driver_info = (unsigned long) &kalmia_info, },
+ { /* EMPTY == end of list */} };
+MODULE_DEVICE_TABLE( usb, products);
+
+static struct usb_driver kalmia_driver = {
+ .name = "kalmia",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume
+};
+
+static int __init kalmia_init(void)
+{
+ return usb_register(&kalmia_driver);
+}
+module_init( kalmia_init);
+
+static void __exit kalmia_exit(void)
+{
+ usb_deregister(&kalmia_driver);
+}
+module_exit( kalmia_exit);
+
+MODULE_AUTHOR("Marius Bjoernstad Kotsbak <marius@kotsbak.com>");
+MODULE_DESCRIPTION("Samsung Kalmia USB network driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c
index 241756e..1a2234c 100644
--- a/drivers/net/usb/zaurus.c
+++ b/drivers/net/usb/zaurus.c
@@ -331,17 +331,7 @@
ZAURUS_MASTER_INTERFACE,
.driver_info = ZAURUS_PXA_INFO,
},
-
-
-/* At least some of the newest PXA units have very different lies about
- * their standards support: they claim to be cell phones offering
- * direct access to their radios! (No, they don't conform to CDC MDLM.)
- */
{
- USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
- USB_CDC_PROTO_NONE),
- .driver_info = (unsigned long) &bogus_mdlm_info,
-}, {
/* Motorola MOTOMAGX phones */
USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index fa6e2ac..6740235 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -575,7 +575,7 @@
struct vmxnet3_cmd_ring *ring = &rq->rx_ring[ring_idx];
u32 val;
- while (num_allocated < num_to_alloc) {
+ while (num_allocated <= num_to_alloc) {
struct vmxnet3_rx_buf_info *rbi;
union Vmxnet3_GenericDesc *gd;
@@ -621,9 +621,15 @@
BUG_ON(rbi->dma_addr == 0);
gd->rxd.addr = cpu_to_le64(rbi->dma_addr);
- gd->dword[2] = cpu_to_le32((ring->gen << VMXNET3_RXD_GEN_SHIFT)
+ gd->dword[2] = cpu_to_le32((!ring->gen << VMXNET3_RXD_GEN_SHIFT)
| val | rbi->len);
+ /* Fill the last buffer but dont mark it ready, or else the
+ * device will think that the queue is full */
+ if (num_allocated == num_to_alloc)
+ break;
+
+ gd->dword[2] |= cpu_to_le32(ring->gen << VMXNET3_RXD_GEN_SHIFT);
num_allocated++;
vmxnet3_cmd_ring_adv_next2fill(ring);
}
@@ -1140,6 +1146,7 @@
VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2
};
u32 num_rxd = 0;
+ bool skip_page_frags = false;
struct Vmxnet3_RxCompDesc *rcd;
struct vmxnet3_rx_ctx *ctx = &rq->rx_ctx;
#ifdef __BIG_ENDIAN_BITFIELD
@@ -1150,11 +1157,12 @@
&rxComp);
while (rcd->gen == rq->comp_ring.gen) {
struct vmxnet3_rx_buf_info *rbi;
- struct sk_buff *skb;
+ struct sk_buff *skb, *new_skb = NULL;
+ struct page *new_page = NULL;
int num_to_alloc;
struct Vmxnet3_RxDesc *rxd;
u32 idx, ring_idx;
-
+ struct vmxnet3_cmd_ring *ring = NULL;
if (num_rxd >= quota) {
/* we may stop even before we see the EOP desc of
* the current pkt
@@ -1165,6 +1173,7 @@
BUG_ON(rcd->rqID != rq->qid && rcd->rqID != rq->qid2);
idx = rcd->rxdIdx;
ring_idx = rcd->rqID < adapter->num_rx_queues ? 0 : 1;
+ ring = rq->rx_ring + ring_idx;
vmxnet3_getRxDesc(rxd, &rq->rx_ring[ring_idx].base[idx].rxd,
&rxCmdDesc);
rbi = rq->buf_info[ring_idx] + idx;
@@ -1193,37 +1202,80 @@
goto rcd_done;
}
+ skip_page_frags = false;
ctx->skb = rbi->skb;
- rbi->skb = NULL;
+ new_skb = dev_alloc_skb(rbi->len + NET_IP_ALIGN);
+ if (new_skb == NULL) {
+ /* Skb allocation failed, do not handover this
+ * skb to stack. Reuse it. Drop the existing pkt
+ */
+ rq->stats.rx_buf_alloc_failure++;
+ ctx->skb = NULL;
+ rq->stats.drop_total++;
+ skip_page_frags = true;
+ goto rcd_done;
+ }
pci_unmap_single(adapter->pdev, rbi->dma_addr, rbi->len,
PCI_DMA_FROMDEVICE);
skb_put(ctx->skb, rcd->len);
+
+ /* Immediate refill */
+ new_skb->dev = adapter->netdev;
+ skb_reserve(new_skb, NET_IP_ALIGN);
+ rbi->skb = new_skb;
+ rbi->dma_addr = pci_map_single(adapter->pdev,
+ rbi->skb->data, rbi->len,
+ PCI_DMA_FROMDEVICE);
+ rxd->addr = cpu_to_le64(rbi->dma_addr);
+ rxd->len = rbi->len;
+
} else {
- BUG_ON(ctx->skb == NULL);
+ BUG_ON(ctx->skb == NULL && !skip_page_frags);
+
/* non SOP buffer must be type 1 in most cases */
- if (rbi->buf_type == VMXNET3_RX_BUF_PAGE) {
- BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY);
+ BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_PAGE);
+ BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY);
- if (rcd->len) {
- pci_unmap_page(adapter->pdev,
- rbi->dma_addr, rbi->len,
- PCI_DMA_FROMDEVICE);
+ /* If an sop buffer was dropped, skip all
+ * following non-sop fragments. They will be reused.
+ */
+ if (skip_page_frags)
+ goto rcd_done;
- vmxnet3_append_frag(ctx->skb, rcd, rbi);
- rbi->page = NULL;
- }
- } else {
- /*
- * The only time a non-SOP buffer is type 0 is
- * when it's EOP and error flag is raised, which
- * has already been handled.
+ new_page = alloc_page(GFP_ATOMIC);
+ if (unlikely(new_page == NULL)) {
+ /* Replacement page frag could not be allocated.
+ * Reuse this page. Drop the pkt and free the
+ * skb which contained this page as a frag. Skip
+ * processing all the following non-sop frags.
*/
- BUG_ON(true);
+ rq->stats.rx_buf_alloc_failure++;
+ dev_kfree_skb(ctx->skb);
+ ctx->skb = NULL;
+ skip_page_frags = true;
+ goto rcd_done;
}
+
+ if (rcd->len) {
+ pci_unmap_page(adapter->pdev,
+ rbi->dma_addr, rbi->len,
+ PCI_DMA_FROMDEVICE);
+
+ vmxnet3_append_frag(ctx->skb, rcd, rbi);
+ }
+
+ /* Immediate refill */
+ rbi->page = new_page;
+ rbi->dma_addr = pci_map_page(adapter->pdev, rbi->page,
+ 0, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ rxd->addr = cpu_to_le64(rbi->dma_addr);
+ rxd->len = rbi->len;
}
+
skb = ctx->skb;
if (rcd->eop) {
skb->len += skb->data_len;
@@ -1244,26 +1296,27 @@
}
rcd_done:
- /* device may skip some rx descs */
- rq->rx_ring[ring_idx].next2comp = idx;
- VMXNET3_INC_RING_IDX_ONLY(rq->rx_ring[ring_idx].next2comp,
- rq->rx_ring[ring_idx].size);
+ /* device may have skipped some rx descs */
+ ring->next2comp = idx;
+ num_to_alloc = vmxnet3_cmd_ring_desc_avail(ring);
+ ring = rq->rx_ring + ring_idx;
+ while (num_to_alloc) {
+ vmxnet3_getRxDesc(rxd, &ring->base[ring->next2fill].rxd,
+ &rxCmdDesc);
+ BUG_ON(!rxd->addr);
- /* refill rx buffers frequently to avoid starving the h/w */
- num_to_alloc = vmxnet3_cmd_ring_desc_avail(rq->rx_ring +
- ring_idx);
- if (unlikely(num_to_alloc > VMXNET3_RX_ALLOC_THRESHOLD(rq,
- ring_idx, adapter))) {
- vmxnet3_rq_alloc_rx_buf(rq, ring_idx, num_to_alloc,
- adapter);
+ /* Recv desc is ready to be used by the device */
+ rxd->gen = ring->gen;
+ vmxnet3_cmd_ring_adv_next2fill(ring);
+ num_to_alloc--;
+ }
- /* if needed, update the register */
- if (unlikely(rq->shared->updateRxProd)) {
- VMXNET3_WRITE_BAR0_REG(adapter,
- rxprod_reg[ring_idx] + rq->qid * 8,
- rq->rx_ring[ring_idx].next2fill);
- rq->uncommitted[ring_idx] = 0;
- }
+ /* if needed, update the register */
+ if (unlikely(rq->shared->updateRxProd)) {
+ VMXNET3_WRITE_BAR0_REG(adapter,
+ rxprod_reg[ring_idx] + rq->qid * 8,
+ ring->next2fill);
+ rq->uncommitted[ring_idx] = 0;
}
vmxnet3_comp_ring_adv_next2proc(&rq->comp_ring);
@@ -2894,6 +2947,7 @@
else
#endif
num_rx_queues = 1;
+ num_rx_queues = rounddown_pow_of_two(num_rx_queues);
if (enable_mq)
num_tx_queues = min(VMXNET3_DEVICE_MAX_TX_QUEUES,
@@ -2901,6 +2955,7 @@
else
num_tx_queues = 1;
+ num_tx_queues = rounddown_pow_of_two(num_tx_queues);
netdev = alloc_etherdev_mq(sizeof(struct vmxnet3_adapter),
max(num_tx_queues, num_rx_queues));
printk(KERN_INFO "# of Tx queues : %d, # of Rx queues : %d\n",
@@ -3085,6 +3140,7 @@
else
#endif
num_rx_queues = 1;
+ num_rx_queues = rounddown_pow_of_two(num_rx_queues);
cancel_work_sync(&adapter->work);
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index f50d36f..e08d75e 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -55,6 +55,7 @@
#include <linux/if_vlan.h>
#include <linux/if_arp.h>
#include <linux/inetdevice.h>
+#include <linux/log2.h>
#include "vmxnet3_defs.h"
@@ -68,10 +69,10 @@
/*
* Version numbers
*/
-#define VMXNET3_DRIVER_VERSION_STRING "1.1.9.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING "1.1.18.0-k"
/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM 0x01010900
+#define VMXNET3_DRIVER_VERSION_NUM 0x01011200
#if defined(CONFIG_PCI_MSI)
/* RSS only makes sense if MSI-X is supported. */
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index e050bd6..777d1a4 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -2203,8 +2203,10 @@
if (port->mode != FST_RAW) {
err = hdlc_open(dev);
- if (err)
+ if (err) {
+ module_put(THIS_MODULE);
return err;
+ }
}
fst_openport(port);
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 2204762..b6c5d37 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -72,6 +72,11 @@
module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
+static int modparam_fastchanswitch;
+module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO);
+MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios.");
+
+
/* Module info */
MODULE_AUTHOR("Jiri Slaby");
MODULE_AUTHOR("Nick Kossifidis");
@@ -2686,6 +2691,7 @@
struct ath5k_hw *ah = sc->ah;
struct ath_common *common = ath5k_hw_common(ah);
int ret, ani_mode;
+ bool fast;
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
@@ -2705,7 +2711,10 @@
ath5k_drain_tx_buffs(sc);
if (chan)
sc->curchan = chan;
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL,
+
+ fast = ((chan != NULL) && modparam_fastchanswitch) ? 1 : 0;
+
+ ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, fast,
skip_pcu);
if (ret) {
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c
index 62172d5..f82383b 100644
--- a/drivers/net/wireless/ath/ath5k/desc.c
+++ b/drivers/net/wireless/ath/ath5k/desc.c
@@ -107,10 +107,13 @@
case AR5K_PKT_TYPE_BEACON:
case AR5K_PKT_TYPE_PROBE_RESP:
frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY;
+ break;
case AR5K_PKT_TYPE_PIFS:
frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS;
+ break;
default:
frame_type = type;
+ break;
}
tx_ctl->tx_control_0 |=
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 1fef84f..392771f 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -691,14 +691,12 @@
if (!chinfo[pier].pd_curves)
continue;
- for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+ for (pdg = 0; pdg < AR5K_EEPROM_N_PD_CURVES; pdg++) {
struct ath5k_pdgain_info *pd =
&chinfo[pier].pd_curves[pdg];
- if (pd != NULL) {
- kfree(pd->pd_step);
- kfree(pd->pd_pwr);
- }
+ kfree(pd->pd_step);
+ kfree(pd->pd_pwr);
}
kfree(chinfo[pier].pd_curves);
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
index 296c316..f2c0c23 100644
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -297,7 +297,9 @@
#ifdef CONFIG_PM_SLEEP
static int ath5k_pci_suspend(struct device *dev)
{
- struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath5k_softc *sc = hw->priv;
ath5k_led_off(sc);
return 0;
@@ -306,7 +308,8 @@
static int ath5k_pci_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
- struct ath5k_softc *sc = pci_get_drvdata(pdev);
+ struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+ struct ath5k_softc *sc = hw->priv;
/*
* Suspend/Resume resets the PCI configuration space, so we have to
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 3510de2..126a4ea 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -1124,8 +1124,11 @@
/* Non fatal, can happen eg.
* on mode change */
ret = 0;
- } else
+ } else {
+ ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET,
+ "fast chan change successful\n");
return 0;
+ }
}
/*
diff --git a/drivers/net/wireless/ath/ath5k/sysfs.c b/drivers/net/wireless/ath/ath5k/sysfs.c
index 929c68c..a073cdc 100644
--- a/drivers/net/wireless/ath/ath5k/sysfs.c
+++ b/drivers/net/wireless/ath/ath5k/sysfs.c
@@ -10,7 +10,8 @@
struct device_attribute *attr, \
char *buf) \
{ \
- struct ath5k_softc *sc = dev_get_drvdata(dev); \
+ struct ieee80211_hw *hw = dev_get_drvdata(dev); \
+ struct ath5k_softc *sc = hw->priv; \
return snprintf(buf, PAGE_SIZE, "%d\n", get); \
} \
\
@@ -18,7 +19,8 @@
struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
- struct ath5k_softc *sc = dev_get_drvdata(dev); \
+ struct ieee80211_hw *hw = dev_get_drvdata(dev); \
+ struct ath5k_softc *sc = hw->priv; \
int val; \
\
val = (int)simple_strtoul(buf, NULL, 10); \
@@ -33,7 +35,8 @@
struct device_attribute *attr, \
char *buf) \
{ \
- struct ath5k_softc *sc = dev_get_drvdata(dev); \
+ struct ieee80211_hw *hw = dev_get_drvdata(dev); \
+ struct ath5k_softc *sc = hw->priv; \
return snprintf(buf, PAGE_SIZE, "%d\n", get); \
} \
static DEVICE_ATTR(name, S_IRUGO, ath5k_attr_show_##name, NULL)
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index b8cbfc7..3bad0b2 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -278,6 +278,12 @@
ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
+ /* The device has to be moved to FULLSLEEP forcibly.
+ * Otherwise the chip never moved to full sleep,
+ * when no interface is up.
+ */
+ ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 3779b89..33443bc 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -671,7 +671,8 @@
* TODO - this could be improved to be dependent on the rate.
* The hardware can keep up at lower rates, but not higher rates
*/
- if (fi->keyix != ATH9K_TXKEYIX_INVALID)
+ if ((fi->keyix != ATH9K_TXKEYIX_INVALID) &&
+ !(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA))
ndelim += ATH_AGGR_ENCRYPTDELIM;
/*
diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index 2fb53d0..333b69e 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -112,6 +112,8 @@
{ USB_DEVICE(0x04bb, 0x093f) },
/* NEC WL300NU-G */
{ USB_DEVICE(0x0409, 0x0249) },
+ /* NEC WL300NU-AG */
+ { USB_DEVICE(0x0409, 0x02b4) },
/* AVM FRITZ!WLAN USB Stick N */
{ USB_DEVICE(0x057c, 0x8401) },
/* AVM FRITZ!WLAN USB Stick N 2.4 */
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c
index f9db25b..facc94e 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965.c
@@ -1218,10 +1218,10 @@
* receive commit_rxon request
* abort any previous channel switch if still in process
*/
- if (priv->switch_rxon.switch_in_progress &&
- (priv->switch_rxon.channel != ctx->staging.channel)) {
+ if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) &&
+ (priv->switch_channel != ctx->staging.channel)) {
IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
- le16_to_cpu(priv->switch_rxon.channel));
+ le16_to_cpu(priv->switch_channel));
iwl_legacy_chswitch_done(priv, false);
}
@@ -1237,7 +1237,7 @@
memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
iwl_legacy_print_rx_config_cmd(priv, ctx);
- return 0;
+ goto set_tx_power;
}
/* If we are currently associated and the new config requires
@@ -1317,6 +1317,7 @@
iwl4965_init_sensitivity(priv);
+set_tx_power:
/* If we issue a new RXON command which required a tune then we must
* send a new TXPOWER command or we won't be able to Tx any frames */
ret = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true);
@@ -1403,9 +1404,6 @@
return rc;
}
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
-
return iwl_legacy_send_cmd_pdu(priv,
REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
}
diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c
index 42df832..3be76bd 100644
--- a/drivers/net/wireless/iwlegacy/iwl-core.c
+++ b/drivers/net/wireless/iwlegacy/iwl-core.c
@@ -859,12 +859,8 @@
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- if (priv->switch_rxon.switch_in_progress) {
+ if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
ieee80211_chswitch_done(ctx->vif, is_success);
- mutex_lock(&priv->mutex);
- priv->switch_rxon.switch_in_progress = false;
- mutex_unlock(&priv->mutex);
- }
}
EXPORT_SYMBOL(iwl_legacy_chswitch_done);
@@ -876,19 +872,19 @@
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl_legacy_rxon_cmd *rxon = (void *)&ctx->active;
- if (priv->switch_rxon.switch_in_progress) {
- if (!le32_to_cpu(csa->status) &&
- (csa->channel == priv->switch_rxon.channel)) {
- rxon->channel = csa->channel;
- ctx->staging.channel = csa->channel;
- IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
+ if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+ return;
+
+ if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) {
+ rxon->channel = csa->channel;
+ ctx->staging.channel = csa->channel;
+ IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
le16_to_cpu(csa->channel));
- iwl_legacy_chswitch_done(priv, true);
- } else {
- IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
- le16_to_cpu(csa->channel));
- iwl_legacy_chswitch_done(priv, false);
- }
+ iwl_legacy_chswitch_done(priv, true);
+ } else {
+ IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+ le16_to_cpu(csa->channel));
+ iwl_legacy_chswitch_done(priv, false);
}
}
EXPORT_SYMBOL(iwl_legacy_rx_csa);
diff --git a/drivers/net/wireless/iwlegacy/iwl-core.h b/drivers/net/wireless/iwlegacy/iwl-core.h
index bc66c60..c5fbda0 100644
--- a/drivers/net/wireless/iwlegacy/iwl-core.h
+++ b/drivers/net/wireless/iwlegacy/iwl-core.h
@@ -560,7 +560,7 @@
#define STATUS_SCAN_HW 15
#define STATUS_POWER_PMI 16
#define STATUS_FW_ERROR 17
-
+#define STATUS_CHANNEL_SWITCH_PENDING 18
static inline int iwl_legacy_is_ready(struct iwl_priv *priv)
{
diff --git a/drivers/net/wireless/iwlegacy/iwl-dev.h b/drivers/net/wireless/iwlegacy/iwl-dev.h
index be0106c..ea30122 100644
--- a/drivers/net/wireless/iwlegacy/iwl-dev.h
+++ b/drivers/net/wireless/iwlegacy/iwl-dev.h
@@ -855,17 +855,6 @@
};
/*
- * iwl_switch_rxon: "channel switch" structure
- *
- * @ switch_in_progress: channel switch in progress
- * @ channel: new channel
- */
-struct iwl_switch_rxon {
- bool switch_in_progress;
- __le16 channel;
-};
-
-/*
* schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
* to perform continuous uCode event logging operation if enabled
*/
@@ -1115,7 +1104,7 @@
struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
- struct iwl_switch_rxon switch_rxon;
+ __le16 switch_channel;
/* 1st responses from initialize and runtime uCode images.
* _4965's initialize alive response contains some calibration data. */
diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c
index af2ae22..7157ba5 100644
--- a/drivers/net/wireless/iwlegacy/iwl4965-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c
@@ -2861,16 +2861,13 @@
goto out;
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
- test_bit(STATUS_SCANNING, &priv->status))
+ test_bit(STATUS_SCANNING, &priv->status) ||
+ test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
goto out;
if (!iwl_legacy_is_associated_ctx(ctx))
goto out;
- /* channel switch in progress */
- if (priv->switch_rxon.switch_in_progress == true)
- goto out;
-
if (priv->cfg->ops->lib->set_channel_switch) {
ch = channel->hw_value;
@@ -2919,15 +2916,18 @@
* at this point, staging_rxon has the
* configuration for channel switch
*/
- if (priv->cfg->ops->lib->set_channel_switch(priv,
- ch_switch))
- priv->switch_rxon.switch_in_progress = false;
+ set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+ priv->switch_channel = cpu_to_le16(ch);
+ if (priv->cfg->ops->lib->set_channel_switch(priv, ch_switch)) {
+ clear_bit(STATUS_CHANNEL_SWITCH_PENDING,
+ &priv->status);
+ priv->switch_channel = 0;
+ ieee80211_chswitch_done(ctx->vif, false);
+ }
}
}
out:
mutex_unlock(&priv->mutex);
- if (!priv->switch_rxon.switch_in_progress)
- ieee80211_chswitch_done(ctx->vif, false);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 61d4a11..2a88e73 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -36,6 +36,7 @@
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
+#include <linux/stringify.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
@@ -55,10 +56,10 @@
#define IWL100_UCODE_API_MIN 5
#define IWL1000_FW_PRE "iwlwifi-1000-"
-#define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode"
+#define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE __stringify(api) ".ucode"
#define IWL100_FW_PRE "iwlwifi-100-"
-#define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE #api ".ucode"
+#define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE __stringify(api) ".ucode"
/*
diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c
index 86feec8..3df76f5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-2000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-2000.c
@@ -36,6 +36,7 @@
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
+#include <linux/stringify.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
@@ -58,13 +59,13 @@
#define IWL105_UCODE_API_MIN 5
#define IWL2030_FW_PRE "iwlwifi-2030-"
-#define IWL2030_MODULE_FIRMWARE(api) IWL2030_FW_PRE #api ".ucode"
+#define IWL2030_MODULE_FIRMWARE(api) IWL2030_FW_PRE __stringify(api) ".ucode"
#define IWL2000_FW_PRE "iwlwifi-2000-"
-#define IWL2000_MODULE_FIRMWARE(api) IWL2000_FW_PRE #api ".ucode"
+#define IWL2000_MODULE_FIRMWARE(api) IWL2000_FW_PRE __stringify(api) ".ucode"
#define IWL105_FW_PRE "iwlwifi-105-"
-#define IWL105_MODULE_FIRMWARE(api) IWL105_FW_PRE #api ".ucode"
+#define IWL105_MODULE_FIRMWARE(api) IWL105_FW_PRE __stringify(api) ".ucode"
static void iwl2000_set_ct_threshold(struct iwl_priv *priv)
{
@@ -177,79 +178,6 @@
return 0;
}
-static int iwl2030_hw_channel_switch(struct iwl_priv *priv,
- struct ieee80211_channel_switch *ch_switch)
-{
- /*
- * MULTI-FIXME
- * See iwl_mac_channel_switch.
- */
- struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
- struct iwl6000_channel_switch_cmd cmd;
- const struct iwl_channel_info *ch_info;
- u32 switch_time_in_usec, ucode_switch_time;
- u16 ch;
- u32 tsf_low;
- u8 switch_count;
- u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
- struct ieee80211_vif *vif = ctx->vif;
- struct iwl_host_cmd hcmd = {
- .id = REPLY_CHANNEL_SWITCH,
- .len = { sizeof(cmd), },
- .flags = CMD_SYNC,
- .data = { &cmd, },
- };
-
- cmd.band = priv->band == IEEE80211_BAND_2GHZ;
- ch = ch_switch->channel->hw_value;
- IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
- ctx->active.channel, ch);
- cmd.channel = cpu_to_le16(ch);
- cmd.rxon_flags = ctx->staging.flags;
- cmd.rxon_filter_flags = ctx->staging.filter_flags;
- switch_count = ch_switch->count;
- tsf_low = ch_switch->timestamp & 0x0ffffffff;
- /*
- * calculate the ucode channel switch time
- * adding TSF as one of the factor for when to switch
- */
- if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
- if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
- beacon_interval)) {
- switch_count -= (priv->ucode_beacon_time -
- tsf_low) / beacon_interval;
- } else
- switch_count = 0;
- }
- if (switch_count <= 1)
- cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
- else {
- switch_time_in_usec =
- vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
- ucode_switch_time = iwl_usecs_to_beacons(priv,
- switch_time_in_usec,
- beacon_interval);
- cmd.switch_time = iwl_add_beacon_time(priv,
- priv->ucode_beacon_time,
- ucode_switch_time,
- beacon_interval);
- }
- IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
- cmd.switch_time);
- ch_info = iwl_get_channel_info(priv, priv->band, ch);
- if (ch_info)
- cmd.expect_beacon = is_channel_radar(ch_info);
- else {
- IWL_ERR(priv, "invalid channel switch from %u to %u\n",
- ctx->active.channel, ch);
- return -EFAULT;
- }
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
-
- return iwl_send_cmd_sync(priv, &hcmd);
-}
-
static struct iwl_lib_ops iwl2000_lib = {
.set_hw_params = iwl2000_hw_set_hw_params,
.rx_handler_setup = iwlagn_rx_handler_setup,
@@ -258,7 +186,6 @@
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.send_tx_power = iwlagn_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
- .set_channel_switch = iwl2030_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.config = iwl2000_nic_config,
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index a70b8cf..e816c27 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -37,6 +37,7 @@
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
+#include <linux/stringify.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
@@ -57,10 +58,10 @@
#define IWL5150_UCODE_API_MIN 1
#define IWL5000_FW_PRE "iwlwifi-5000-"
-#define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE #api ".ucode"
+#define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE __stringify(api) ".ucode"
#define IWL5150_FW_PRE "iwlwifi-5150-"
-#define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE #api ".ucode"
+#define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE __stringify(api) ".ucode"
/* NIC configuration for 5000 series */
static void iwl5000_nic_config(struct iwl_priv *priv)
@@ -331,8 +332,6 @@
ctx->active.channel, ch);
return -EFAULT;
}
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
}
@@ -425,7 +424,6 @@
};
static struct iwl_ht_params iwl5000_ht_params = {
.ht_greenfield_support = true,
- .use_rts_for_aggregation = true, /* use rts/cts protection */
};
#define IWL_DEVICE_5000 \
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index fda6fe0..5b150bc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -36,6 +36,7 @@
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
+#include <linux/stringify.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
@@ -58,16 +59,16 @@
#define IWL6000G2_UCODE_API_MIN 4
#define IWL6000_FW_PRE "iwlwifi-6000-"
-#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
+#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode"
#define IWL6050_FW_PRE "iwlwifi-6050-"
-#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
+#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE __stringify(api) ".ucode"
#define IWL6005_FW_PRE "iwlwifi-6000g2a-"
-#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE #api ".ucode"
+#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE __stringify(api) ".ucode"
#define IWL6030_FW_PRE "iwlwifi-6000g2b-"
-#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE #api ".ucode"
+#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode"
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
@@ -270,8 +271,6 @@
ctx->active.channel, ch);
return -EFAULT;
}
- priv->switch_rxon.channel = cmd.channel;
- priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
index b12c72d..23fa93d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
@@ -163,17 +163,9 @@
__le16 fc, __le32 *tx_flags)
{
if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS ||
- info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT ||
+ info->flags & IEEE80211_TX_CTL_AMPDU)
*tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
- return;
- }
-
- if (priv->cfg->ht_params &&
- priv->cfg->ht_params->use_rts_for_aggregation &&
- info->flags & IEEE80211_TX_CTL_AMPDU) {
- *tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
- return;
- }
}
/* Calc max signal level (dBm) among 3 possible receivers */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
index a95ad84..09f679d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
@@ -325,6 +325,14 @@
return 0;
}
+ /*
+ * force CTS-to-self frames protection if RTS-CTS is not preferred
+ * one aggregation protection method
+ */
+ if (!(priv->cfg->ht_params &&
+ priv->cfg->ht_params->use_rts_for_aggregation))
+ ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+
if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
@@ -342,10 +350,10 @@
* receive commit_rxon request
* abort any previous channel switch if still in process
*/
- if (priv->switch_rxon.switch_in_progress &&
- (priv->switch_rxon.channel != ctx->staging.channel)) {
+ if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) &&
+ (priv->switch_channel != ctx->staging.channel)) {
IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
- le16_to_cpu(priv->switch_rxon.channel));
+ le16_to_cpu(priv->switch_channel));
iwl_chswitch_done(priv, false);
}
@@ -362,6 +370,11 @@
}
memcpy(active, &ctx->staging, sizeof(*active));
+ /*
+ * We do not commit tx power settings while channel changing,
+ * do it now if after settings changed.
+ */
+ iwl_set_tx_power(priv, priv->tx_power_next, false);
return 0;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index a662adc..8e1942e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2843,16 +2843,13 @@
goto out;
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
- test_bit(STATUS_SCANNING, &priv->status))
+ test_bit(STATUS_SCANNING, &priv->status) ||
+ test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
goto out;
if (!iwl_is_associated_ctx(ctx))
goto out;
- /* channel switch in progress */
- if (priv->switch_rxon.switch_in_progress == true)
- goto out;
-
if (priv->cfg->ops->lib->set_channel_switch) {
ch = channel->hw_value;
@@ -2901,15 +2898,19 @@
* at this point, staging_rxon has the
* configuration for channel switch
*/
+ set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+ priv->switch_channel = cpu_to_le16(ch);
if (priv->cfg->ops->lib->set_channel_switch(priv,
- ch_switch))
- priv->switch_rxon.switch_in_progress = false;
+ ch_switch)) {
+ clear_bit(STATUS_CHANNEL_SWITCH_PENDING,
+ &priv->status);
+ priv->switch_channel = 0;
+ ieee80211_chswitch_done(ctx->vif, false);
+ }
}
}
out:
mutex_unlock(&priv->mutex);
- if (!priv->switch_rxon.switch_in_progress)
- ieee80211_chswitch_done(ctx->vif, false);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 4653dea..45cc51c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -843,12 +843,8 @@
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- if (priv->switch_rxon.switch_in_progress) {
+ if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
ieee80211_chswitch_done(ctx->vif, is_success);
- mutex_lock(&priv->mutex);
- priv->switch_rxon.switch_in_progress = false;
- mutex_unlock(&priv->mutex);
- }
}
#ifdef CONFIG_IWLWIFI_DEBUG
@@ -1767,6 +1763,7 @@
struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl_rxon_context *tmp;
+ enum nl80211_iftype newviftype = newtype;
u32 interface_modes;
int err;
@@ -1822,7 +1819,7 @@
/* success */
iwl_teardown_interface(priv, vif, true);
- vif->type = newtype;
+ vif->type = newviftype;
vif->p2p = newp2p;
err = iwl_setup_interface(priv, ctx);
WARN_ON(err);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 3bb76f6..a54d416 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -560,6 +560,7 @@
#define STATUS_POWER_PMI 16
#define STATUS_FW_ERROR 17
#define STATUS_DEVICE_ENABLED 18
+#define STATUS_CHANNEL_SWITCH_PENDING 19
static inline int iwl_is_ready(struct iwl_priv *priv)
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 22a6e3e..c8de236 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -982,17 +982,6 @@
};
/*
- * iwl_switch_rxon: "channel switch" structure
- *
- * @ switch_in_progress: channel switch in progress
- * @ channel: new channel
- */
-struct iwl_switch_rxon {
- bool switch_in_progress;
- __le16 channel;
-};
-
-/*
* schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
* to perform continuous uCode event logging operation if enabled
*/
@@ -1287,7 +1276,7 @@
struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
- struct iwl_switch_rxon switch_rxon;
+ __le16 switch_channel;
struct {
u32 error_event_table;
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 0053e9e..b774517 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -250,19 +250,19 @@
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl_rxon_cmd *rxon = (void *)&ctx->active;
- if (priv->switch_rxon.switch_in_progress) {
- if (!le32_to_cpu(csa->status) &&
- (csa->channel == priv->switch_rxon.channel)) {
- rxon->channel = csa->channel;
- ctx->staging.channel = csa->channel;
- IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
+ if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+ return;
+
+ if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) {
+ rxon->channel = csa->channel;
+ ctx->staging.channel = csa->channel;
+ IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
le16_to_cpu(csa->channel));
- iwl_chswitch_done(priv, true);
- } else {
- IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
- le16_to_cpu(csa->channel));
- iwl_chswitch_done(priv, false);
- }
+ iwl_chswitch_done(priv, true);
+ } else {
+ IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+ le16_to_cpu(csa->channel));
+ iwl_chswitch_done(priv, false);
}
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 686e176..137dba9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -126,7 +126,7 @@
}
static void iwlagn_unmap_tfd(struct iwl_priv *priv, struct iwl_cmd_meta *meta,
- struct iwl_tfd *tfd)
+ struct iwl_tfd *tfd, int dma_dir)
{
struct pci_dev *dev = priv->pci_dev;
int i;
@@ -151,7 +151,7 @@
/* Unmap chunks, if any. */
for (i = 1; i < num_tbs; i++)
pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i),
- iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE);
+ iwl_tfd_tb_get_len(tfd, i), dma_dir);
}
/**
@@ -167,7 +167,8 @@
struct iwl_tfd *tfd_tmp = txq->tfds;
int index = txq->q.read_ptr;
- iwlagn_unmap_tfd(priv, &txq->meta[index], &tfd_tmp[index]);
+ iwlagn_unmap_tfd(priv, &txq->meta[index], &tfd_tmp[index],
+ PCI_DMA_TODEVICE);
/* free SKB */
if (txq->txb) {
@@ -310,9 +311,7 @@
i = get_cmd_index(q, q->read_ptr);
if (txq->meta[i].flags & CMD_MAPPED) {
- pci_unmap_single(priv->pci_dev,
- dma_unmap_addr(&txq->meta[i], mapping),
- dma_unmap_len(&txq->meta[i], len),
+ iwlagn_unmap_tfd(priv, &txq->meta[i], &txq->tfds[i],
PCI_DMA_BIDIRECTIONAL);
txq->meta[i].flags = 0;
}
@@ -535,12 +534,7 @@
void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq,
int slots_num, u32 txq_id)
{
- int actual_slots = slots_num;
-
- if (txq_id == priv->cmd_queue)
- actual_slots++;
-
- memset(txq->meta, 0, sizeof(struct iwl_cmd_meta) * actual_slots);
+ memset(txq->meta, 0, sizeof(struct iwl_cmd_meta) * slots_num);
txq->need_update = 0;
@@ -700,10 +694,11 @@
if (!(cmd->dataflags[i] & IWL_HCMD_DFL_NOCOPY))
continue;
phys_addr = pci_map_single(priv->pci_dev, (void *)cmd->data[i],
- cmd->len[i], PCI_DMA_TODEVICE);
+ cmd->len[i], PCI_DMA_BIDIRECTIONAL);
if (pci_dma_mapping_error(priv->pci_dev, phys_addr)) {
iwlagn_unmap_tfd(priv, out_meta,
- &txq->tfds[q->write_ptr]);
+ &txq->tfds[q->write_ptr],
+ PCI_DMA_BIDIRECTIONAL);
idx = -ENOMEM;
goto out;
}
@@ -807,7 +802,7 @@
cmd = txq->cmd[cmd_index];
meta = &txq->meta[cmd_index];
- iwlagn_unmap_tfd(priv, meta, &txq->tfds[index]);
+ iwlagn_unmap_tfd(priv, meta, &txq->tfds[index], PCI_DMA_BIDIRECTIONAL);
/* Input error checking is done when commands are added to queue. */
if (meta->flags & CMD_WANT_SKB) {
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index a7b5cb0..224e985 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -907,7 +907,7 @@
card = sdio_get_drvdata(func);
cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret);
- if (ret)
+ if (ret || !cause)
goto out;
lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause);
@@ -1008,10 +1008,6 @@
if (ret)
goto release;
- ret = sdio_claim_irq(func, if_sdio_interrupt);
- if (ret)
- goto disable;
-
/* For 1-bit transfers to the 8686 model, we need to enable the
* interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
* bit to allow access to non-vendor registers. */
@@ -1083,6 +1079,21 @@
card->rx_unit = 0;
/*
+ * Set up the interrupt handler late.
+ *
+ * If we set it up earlier, the (buggy) hardware generates a spurious
+ * interrupt, even before the interrupt has been enabled, with
+ * CCCR_INTx = 0.
+ *
+ * We register the interrupt handler late so that we can handle any
+ * spurious interrupts, and also to avoid generation of that known
+ * spurious interrupt in the first place.
+ */
+ ret = sdio_claim_irq(func, if_sdio_interrupt);
+ if (ret)
+ goto disable;
+
+ /*
* Enable interrupts now that everything is set up
*/
sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret);
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 660831c..687c1f2 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1288,6 +1288,8 @@
*(unsigned long *) wdev_priv = (unsigned long) priv;
+ set_wiphy_dev(wdev->wiphy, (struct device *) priv->adapter->dev);
+
ret = wiphy_register(wdev->wiphy);
if (ret < 0) {
dev_err(priv->adapter->dev, "%s: registering cfg80211 device\n",
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 3226118..aeac3cc 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -2474,6 +2474,7 @@
* faster client.
*/
#define MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY 0x00000400
+#define MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR 0x00000200
#define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT 0x00000080
#define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP 0x00000020
#define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON 0x00000010
@@ -2510,7 +2511,8 @@
cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT |
MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP |
MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON |
- MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY);
+ MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY |
+ MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR);
cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS);
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 555180d..b704e5b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -250,7 +250,8 @@
if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL)
rt2x00link_reset_tuner(rt2x00dev, false);
- if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+ test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
(ieee80211_flags & IEEE80211_CONF_CHANGE_PS) &&
(conf->flags & IEEE80211_CONF_PS)) {
beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index c018d67a..939821b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -146,6 +146,9 @@
struct rt2x00_dev *rt2x00dev =
container_of(work, struct rt2x00_dev, autowakeup_work.work);
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return;
+
if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
ERROR(rt2x00dev, "Device failed to wakeup.\n");
clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
@@ -1160,6 +1163,7 @@
* Stop all work.
*/
cancel_work_sync(&rt2x00dev->intf_work);
+ cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
if (rt2x00_is_usb(rt2x00dev)) {
del_timer_sync(&rt2x00dev->txstatus_timer);
cancel_work_sync(&rt2x00dev->rxdone_work);
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 89100e7..254b64b 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -669,6 +669,19 @@
&rx_status,
(u8 *) pdesc, skb);
+ new_skb = dev_alloc_skb(rtlpci->rxbuffersize);
+ if (unlikely(!new_skb)) {
+ RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV),
+ DBG_DMESG,
+ ("can't alloc skb for rx\n"));
+ goto done;
+ }
+
+ pci_unmap_single(rtlpci->pdev,
+ *((dma_addr_t *) skb->cb),
+ rtlpci->rxbuffersize,
+ PCI_DMA_FROMDEVICE);
+
skb_put(skb, rtlpriv->cfg->ops->get_desc((u8 *) pdesc,
false,
HW_DESC_RXPKT_LEN));
@@ -685,22 +698,7 @@
hdr = rtl_get_hdr(skb);
fc = rtl_get_fc(skb);
- /* try for new buffer - if allocation fails, drop
- * frame and reuse old buffer
- */
- new_skb = dev_alloc_skb(rtlpci->rxbuffersize);
- if (unlikely(!new_skb)) {
- RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV),
- DBG_DMESG,
- ("can't alloc skb for rx\n"));
- goto done;
- }
- pci_unmap_single(rtlpci->pdev,
- *((dma_addr_t *) skb->cb),
- rtlpci->rxbuffersize,
- PCI_DMA_FROMDEVICE);
-
- if (!stats.crc || !stats.hwerror) {
+ if (!stats.crc && !stats.hwerror) {
memcpy(IEEE80211_SKB_RXCB(skb), &rx_status,
sizeof(rx_status));
@@ -1626,6 +1624,16 @@
pci_read_config_byte(pdev, 0x8, &revisionid);
pci_read_config_word(pdev, 0x3C, &irqline);
+ /* PCI ID 0x10ec:0x8192 occurs for both RTL8192E, which uses
+ * r8192e_pci, and RTL8192SE, which uses this driver. If the
+ * revision ID is RTL_PCI_REVISION_ID_8192PCIE (0x01), then
+ * the correct driver is r8192e_pci, thus this routine should
+ * return false.
+ */
+ if (deviceid == RTL_PCI_8192SE_DID &&
+ revisionid == RTL_PCI_REVISION_ID_8192PCIE)
+ return false;
+
if (deviceid == RTL_PCI_8192_DID ||
deviceid == RTL_PCI_0044_DID ||
deviceid == RTL_PCI_0047_DID ||
@@ -1858,7 +1866,8 @@
pci_write_config_byte(pdev, 0x04, 0x07);
/* find adapter */
- _rtl_pci_find_adapter(pdev, hw);
+ if (!_rtl_pci_find_adapter(pdev, hw))
+ goto fail3;
/* Init IO handler */
_rtl_pci_io_handler_init(&pdev->dev, hw);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
index bee7c14..942f7a3 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
@@ -53,6 +53,8 @@
static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
+ const struct firmware *firmware;
+ int err;
rtlpriv->dm.dm_initialgain_enable = 1;
rtlpriv->dm.dm_flag = 0;
@@ -64,6 +66,24 @@
("Can't alloc buffer for fw.\n"));
return 1;
}
+ /* request fw */
+ err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
+ rtlpriv->io.dev);
+ if (err) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Failed to request firmware!\n"));
+ return 1;
+ }
+ if (firmware->size > 0x4000) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Firmware is too big!\n"));
+ release_firmware(firmware);
+ return 1;
+ }
+ memcpy(rtlpriv->rtlhal.pfirmware, firmware->data, firmware->size);
+ rtlpriv->rtlhal.fwsize = firmware->size;
+ release_firmware(firmware);
+
return 0;
}
@@ -278,6 +298,7 @@
{RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/
{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
+ {RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
{RTL_USB_DEVICE(0x0Df6, 0x0052, rtl92cu_hal_cfg)}, /*Sitecom - Edimax*/
{RTL_USB_DEVICE(0x0eb0, 0x9071, rtl92cu_hal_cfg)}, /*NO Brand - Etop*/
/* HP - Lite-On ,8188CUS Slim Combo */
diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c
index a3984f4..f34b5b2 100644
--- a/drivers/oprofile/buffer_sync.c
+++ b/drivers/oprofile/buffer_sync.c
@@ -141,6 +141,13 @@
.notifier_call = module_load_notify,
};
+static void free_all_tasks(void)
+{
+ /* make sure we don't leak task structs */
+ process_task_mortuary();
+ process_task_mortuary();
+}
+
int sync_start(void)
{
int err;
@@ -148,8 +155,6 @@
if (!zalloc_cpumask_var(&marked_cpus, GFP_KERNEL))
return -ENOMEM;
- mutex_lock(&buffer_mutex);
-
err = task_handoff_register(&task_free_nb);
if (err)
goto out1;
@@ -166,7 +171,6 @@
start_cpu_work();
out:
- mutex_unlock(&buffer_mutex);
return err;
out4:
profile_event_unregister(PROFILE_MUNMAP, &munmap_nb);
@@ -174,6 +178,7 @@
profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb);
out2:
task_handoff_unregister(&task_free_nb);
+ free_all_tasks();
out1:
free_cpumask_var(marked_cpus);
goto out;
@@ -182,20 +187,16 @@
void sync_stop(void)
{
- /* flush buffers */
- mutex_lock(&buffer_mutex);
end_cpu_work();
unregister_module_notifier(&module_load_nb);
profile_event_unregister(PROFILE_MUNMAP, &munmap_nb);
profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb);
task_handoff_unregister(&task_free_nb);
- mutex_unlock(&buffer_mutex);
+ barrier(); /* do all of the above first */
+
flush_cpu_work();
- /* make sure we don't leak task structs */
- process_task_mortuary();
- process_task_mortuary();
-
+ free_all_tasks();
free_cpumask_var(marked_cpus);
}
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index c85f744..094308e 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -51,6 +51,7 @@
obj-$(CONFIG_MN10300) += setup-bus.o
obj-$(CONFIG_MICROBLAZE) += setup-bus.o
obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
+obj-$(CONFIG_SPARC_LEON) += setup-bus.o setup-irq.o
#
# ACPI Related PCI FW Functions
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 59f17ac..f02c34d 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -3388,7 +3388,7 @@
}
#else
-static inline int init_iommu_pm_ops(void) { }
+static inline void init_iommu_pm_ops(void) {}
#endif /* CONFIG_PM */
/*
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 135df16..46767c5 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -624,7 +624,7 @@
* system from the sleep state, we'll have to prevent it from signaling
* wake-up.
*/
- pm_runtime_resume(dev);
+ pm_runtime_get_sync(dev);
if (drv && drv->pm && drv->pm->prepare)
error = drv->pm->prepare(dev);
@@ -638,6 +638,8 @@
if (drv && drv->pm && drv->pm->complete)
drv->pm->complete(dev);
+
+ pm_runtime_put_sync(dev);
}
#else /* !CONFIG_PM_SLEEP */
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 56098b3..692671b 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3271,11 +3271,11 @@
}
static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
- unsigned int command_bits, bool change_bridge)
+ unsigned int command_bits, u32 flags)
{
if (arch_set_vga_state)
return arch_set_vga_state(dev, decode, command_bits,
- change_bridge);
+ flags);
return 0;
}
@@ -3284,7 +3284,7 @@
* @dev: the PCI device
* @decode: true = enable decoding, false = disable decoding
* @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
- * @change_bridge_flags: traverse ancestors and change bridges
+ * @flags: traverse ancestors and change bridges
* CHANGE_BRIDGE_ONLY / CHANGE_BRIDGE
*/
int pci_set_vga_state(struct pci_dev *dev, bool decode,
@@ -3483,6 +3483,8 @@
pci_no_msi();
} else if (!strcmp(str, "noaer")) {
pci_no_aer();
+ } else if (!strncmp(str, "realloc", 7)) {
+ pci_realloc();
} else if (!strcmp(str, "nodomains")) {
pci_no_domains();
} else if (!strncmp(str, "cbiosize=", 9)) {
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 731e202..3a39bf1 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -146,6 +146,8 @@
static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { }
#endif
+extern void pci_realloc(void);
+
static inline int pci_no_d1d2(struct pci_dev *dev)
{
unsigned int parent_dstates = 0;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 48849ff..bafb3c3 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -168,7 +168,7 @@
res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN;
if (type == pci_bar_io) {
l &= PCI_BASE_ADDRESS_IO_MASK;
- mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT;
+ mask = PCI_BASE_ADDRESS_IO_MASK & (u32) IO_SPACE_LIMIT;
} else {
l &= PCI_BASE_ADDRESS_MEM_MASK;
mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e8a1406..02145e9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2761,6 +2761,8 @@
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
#endif /*CONFIG_MMC_RICOH_MMC*/
#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 1e9e5a5..9995842 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -47,6 +47,13 @@
(head)->next = NULL; \
} while (0)
+int pci_realloc_enable = 0;
+#define pci_realloc_enabled() pci_realloc_enable
+void pci_realloc(void)
+{
+ pci_realloc_enable = 1;
+}
+
/**
* add_to_list() - add a new resource tracker to the list
* @head: Head of the list
@@ -1025,6 +1032,7 @@
return depth;
}
+
/*
* first try will not touch pci bridge res
* second and later try will clear small leaf bridge res
@@ -1068,6 +1076,13 @@
/* any device complain? */
if (!head.next)
goto enable_and_dump;
+
+ /* don't realloc if asked to do so */
+ if (!pci_realloc_enabled()) {
+ free_list(resource_list_x, &head);
+ goto enable_and_dump;
+ }
+
failed_type = 0;
for (list = head.next; list;) {
failed_type |= list->flags;
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index 435002d..e956f65 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -11,6 +11,7 @@
*
*/
+#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -75,10 +76,10 @@
static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
if (skt->nr == 0)
- gpio_request_array(vpac270_pcmcia_gpios,
+ gpio_free_array(vpac270_pcmcia_gpios,
ARRAY_SIZE(vpac270_pcmcia_gpios));
else
- gpio_request_array(vpac270_cf_gpios,
+ gpio_free_array(vpac270_cf_gpios,
ARRAY_SIZE(vpac270_cf_gpios));
}
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 005417b..e1c4938 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -1156,9 +1156,9 @@
struct wmid3_gds_input_param params = {
.function_num = 0x1,
.hotkey_number = 0x01,
- .devices = ACER_WMID3_GDS_WIRELESS &
- ACER_WMID3_GDS_THREEG &
- ACER_WMID3_GDS_WIMAX &
+ .devices = ACER_WMID3_GDS_WIRELESS |
+ ACER_WMID3_GDS_THREEG |
+ ACER_WMID3_GDS_WIMAX |
ACER_WMID3_GDS_BLUETOOTH,
};
struct acpi_buffer input = {
@@ -1445,6 +1445,8 @@
union acpi_object *obj;
struct event_return_value return_value;
acpi_status status;
+ u16 device_state;
+ const struct key_entry *key;
status = wmi_get_event_data(value, &response);
if (status != AE_OK) {
@@ -1472,23 +1474,32 @@
switch (return_value.function) {
case WMID_HOTKEY_EVENT:
- if (return_value.device_state) {
- u16 device_state = return_value.device_state;
- pr_debug("device state: 0x%x\n", device_state);
- if (has_cap(ACER_CAP_WIRELESS))
- rfkill_set_sw_state(wireless_rfkill,
- !(device_state & ACER_WMID3_GDS_WIRELESS));
- if (has_cap(ACER_CAP_BLUETOOTH))
- rfkill_set_sw_state(bluetooth_rfkill,
- !(device_state & ACER_WMID3_GDS_BLUETOOTH));
- if (has_cap(ACER_CAP_THREEG))
- rfkill_set_sw_state(threeg_rfkill,
- !(device_state & ACER_WMID3_GDS_THREEG));
- }
- if (!sparse_keymap_report_event(acer_wmi_input_dev,
- return_value.key_num, 1, true))
+ device_state = return_value.device_state;
+ pr_debug("device state: 0x%x\n", device_state);
+
+ key = sparse_keymap_entry_from_scancode(acer_wmi_input_dev,
+ return_value.key_num);
+ if (!key) {
pr_warn("Unknown key number - 0x%x\n",
return_value.key_num);
+ } else {
+ switch (key->keycode) {
+ case KEY_WLAN:
+ case KEY_BLUETOOTH:
+ if (has_cap(ACER_CAP_WIRELESS))
+ rfkill_set_sw_state(wireless_rfkill,
+ !(device_state & ACER_WMID3_GDS_WIRELESS));
+ if (has_cap(ACER_CAP_THREEG))
+ rfkill_set_sw_state(threeg_rfkill,
+ !(device_state & ACER_WMID3_GDS_THREEG));
+ if (has_cap(ACER_CAP_BLUETOOTH))
+ rfkill_set_sw_state(bluetooth_rfkill,
+ !(device_state & ACER_WMID3_GDS_BLUETOOTH));
+ break;
+ }
+ sparse_keymap_report_entry(acer_wmi_input_dev, key,
+ 1, true);
+ }
break;
default:
pr_warn("Unknown function number - %d - %d\n",
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 00460cb..3c7857c 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -1025,6 +1025,7 @@
return power;
memset(&props, 0, sizeof(struct backlight_properties));
+ props.type = BACKLIGHT_PLATFORM;
props.max_brightness = max;
bd = backlight_device_register(asus->driver->name,
&asus->platform_device->dev, asus,
diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index 3f204fd..8877b83 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -1030,8 +1030,10 @@
initialize_fan_control_data(data);
err = sysfs_create_group(&pdev->dev.kobj, &compal_attribute_group);
- if (err)
+ if (err) {
+ kfree(data);
return err;
+ }
data->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index d3841de..e39ab1d 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -292,12 +292,9 @@
dell_send_request(buffer, 17, 11);
/* If the hardware switch controls this radio, and the hardware
- switch is disabled, don't allow changing the software state.
- If the hardware switch is reported as not supported, always
- fire the SMI to toggle the killswitch. */
+ switch is disabled, don't allow changing the software state */
if ((hwswitch_state & BIT(hwswitch_bit)) &&
- !(buffer->output[1] & BIT(16)) &&
- (buffer->output[1] & BIT(0))) {
+ !(buffer->output[1] & BIT(16))) {
ret = -EINVAL;
goto out;
}
@@ -403,23 +400,6 @@
static void dell_update_rfkill(struct work_struct *ignored)
{
- int status;
-
- get_buffer();
- dell_send_request(buffer, 17, 11);
- status = buffer->output[1];
- release_buffer();
-
- /* if hardware rfkill is not supported, set it explicitly */
- if (!(status & BIT(0))) {
- if (wifi_rfkill)
- dell_rfkill_set((void *)1, !((status & BIT(17)) >> 17));
- if (bluetooth_rfkill)
- dell_rfkill_set((void *)2, !((status & BIT(18)) >> 18));
- if (wwan_rfkill)
- dell_rfkill_set((void *)3, !((status & BIT(19)) >> 19));
- }
-
if (wifi_rfkill)
dell_rfkill_query(wifi_rfkill, (void *)1);
if (bluetooth_rfkill)
@@ -560,11 +540,11 @@
else
dell_send_request(buffer, 0, 1);
+ ret = buffer->output[1];
+
out:
release_buffer();
- if (ret)
- return ret;
- return buffer->output[1];
+ return ret;
}
static const struct backlight_ops dell_ops = {
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index f94017b..e2faa3c 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -207,6 +207,7 @@
};
struct acpi_buffer input = { sizeof(struct bios_args), &args };
struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ u32 rc;
if (WARN_ON(insize > sizeof(args.data)))
return -EINVAL;
@@ -224,13 +225,13 @@
}
bios_return = (struct bios_return *)obj->buffer.pointer;
+ rc = bios_return->return_code;
- if (bios_return->return_code) {
- if (bios_return->return_code != HPWMI_RET_UNKNOWN_CMDTYPE)
- pr_warn("query 0x%x returned error 0x%x\n",
- query, bios_return->return_code);
+ if (rc) {
+ if (rc != HPWMI_RET_UNKNOWN_CMDTYPE)
+ pr_warn("query 0x%x returned error 0x%x\n", query, rc);
kfree(obj);
- return bios_return->return_code;
+ return rc;
}
if (!outsize) {
diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c
index e936364..7f88c79 100644
--- a/drivers/platform/x86/intel_oaktrail.c
+++ b/drivers/platform/x86/intel_oaktrail.c
@@ -250,6 +250,7 @@
struct backlight_properties props;
memset(&props, 0, sizeof(struct backlight_properties));
+ props.type = BACKLIGHT_PLATFORM;
props.max_brightness = OT_EC_BL_BRIGHTNESS_MAX;
bd = backlight_device_register(DRIVER_NAME,
&oaktrail_device->dev, NULL,
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 77f6e70..26c5b11 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -184,6 +184,10 @@
/* Misc bay events */
TP_HKEY_EV_OPTDRV_EJ = 0x3006, /* opt. drive tray ejected */
+ TP_HKEY_EV_HOTPLUG_DOCK = 0x4010, /* docked into hotplug dock
+ or port replicator */
+ TP_HKEY_EV_HOTPLUG_UNDOCK = 0x4011, /* undocked from hotplug
+ dock or port replicator */
/* User-interface events */
TP_HKEY_EV_LID_CLOSE = 0x5001, /* laptop lid closed */
@@ -194,6 +198,10 @@
TP_HKEY_EV_PEN_REMOVED = 0x500c, /* tablet pen removed */
TP_HKEY_EV_BRGHT_CHANGED = 0x5010, /* backlight control event */
+ /* Key-related user-interface events */
+ TP_HKEY_EV_KEY_NUMLOCK = 0x6000, /* NumLock key pressed */
+ TP_HKEY_EV_KEY_FN = 0x6005, /* Fn key pressed? E420 */
+
/* Thermal events */
TP_HKEY_EV_ALARM_BAT_HOT = 0x6011, /* battery too hot */
TP_HKEY_EV_ALARM_BAT_XHOT = 0x6012, /* battery critically hot */
@@ -201,6 +209,10 @@
TP_HKEY_EV_ALARM_SENSOR_XHOT = 0x6022, /* sensor critically hot */
TP_HKEY_EV_THM_TABLE_CHANGED = 0x6030, /* thermal table changed */
+ TP_HKEY_EV_UNK_6040 = 0x6040, /* Related to AC change?
+ some sort of APM hint,
+ W520 */
+
/* Misc */
TP_HKEY_EV_RFKILL_CHANGED = 0x7000, /* rfkill switch changed */
};
@@ -3513,6 +3525,34 @@
return true;
}
+static bool hotkey_notify_dockevent(const u32 hkey,
+ bool *send_acpi_ev,
+ bool *ignore_acpi_ev)
+{
+ /* 0x4000-0x4FFF: dock-related events */
+ *send_acpi_ev = true;
+ *ignore_acpi_ev = false;
+
+ switch (hkey) {
+ case TP_HKEY_EV_UNDOCK_ACK:
+ /* ACPI undock operation completed after wakeup */
+ hotkey_autosleep_ack = 1;
+ pr_info("undocked\n");
+ hotkey_wakeup_hotunplug_complete_notify_change();
+ return true;
+
+ case TP_HKEY_EV_HOTPLUG_DOCK: /* docked to port replicator */
+ pr_info("docked into hotplug port replicator\n");
+ return true;
+ case TP_HKEY_EV_HOTPLUG_UNDOCK: /* undocked from port replicator */
+ pr_info("undocked from hotplug port replicator\n");
+ return true;
+
+ default:
+ return false;
+ }
+}
+
static bool hotkey_notify_usrevent(const u32 hkey,
bool *send_acpi_ev,
bool *ignore_acpi_ev)
@@ -3547,13 +3587,13 @@
static void thermal_dump_all_sensors(void);
-static bool hotkey_notify_thermal(const u32 hkey,
+static bool hotkey_notify_6xxx(const u32 hkey,
bool *send_acpi_ev,
bool *ignore_acpi_ev)
{
bool known = true;
- /* 0x6000-0x6FFF: thermal alarms */
+ /* 0x6000-0x6FFF: thermal alarms/notices and keyboard events */
*send_acpi_ev = true;
*ignore_acpi_ev = false;
@@ -3582,8 +3622,17 @@
"a sensor reports something is extremely hot!\n");
/* recommended action: immediate sleep/hibernate */
break;
+
+ case TP_HKEY_EV_KEY_NUMLOCK:
+ case TP_HKEY_EV_KEY_FN:
+ /* key press events, we just ignore them as long as the EC
+ * is still reporting them in the normal keyboard stream */
+ *send_acpi_ev = false;
+ *ignore_acpi_ev = true;
+ return true;
+
default:
- pr_alert("THERMAL ALERT: unknown thermal alarm received\n");
+ pr_warn("unknown possible thermal alarm or keyboard event received\n");
known = false;
}
@@ -3652,15 +3701,9 @@
}
break;
case 4:
- /* 0x4000-0x4FFF: dock-related wakeups */
- if (hkey == TP_HKEY_EV_UNDOCK_ACK) {
- hotkey_autosleep_ack = 1;
- pr_info("undocked\n");
- hotkey_wakeup_hotunplug_complete_notify_change();
- known_ev = true;
- } else {
- known_ev = false;
- }
+ /* 0x4000-0x4FFF: dock-related events */
+ known_ev = hotkey_notify_dockevent(hkey, &send_acpi_ev,
+ &ignore_acpi_ev);
break;
case 5:
/* 0x5000-0x5FFF: human interface helpers */
@@ -3668,8 +3711,9 @@
&ignore_acpi_ev);
break;
case 6:
- /* 0x6000-0x6FFF: thermal alarms */
- known_ev = hotkey_notify_thermal(hkey, &send_acpi_ev,
+ /* 0x6000-0x6FFF: thermal alarms/notices and
+ * keyboard events */
+ known_ev = hotkey_notify_6xxx(hkey, &send_acpi_ev,
&ignore_acpi_ev);
break;
case 7:
diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c
index a8d03ae..e7f301da2 100644
--- a/drivers/ptp/ptp_chardev.c
+++ b/drivers/ptp/ptp_chardev.c
@@ -46,7 +46,8 @@
caps.n_ext_ts = ptp->info->n_ext_ts;
caps.n_per_out = ptp->info->n_per_out;
caps.pps = ptp->info->pps;
- err = copy_to_user((void __user *)arg, &caps, sizeof(caps));
+ if (copy_to_user((void __user *)arg, &caps, sizeof(caps)))
+ err = -EFAULT;
break;
case PTP_EXTTS_REQUEST:
@@ -129,8 +130,10 @@
return -ERESTARTSYS;
}
- if (ptp->defunct)
+ if (ptp->defunct) {
+ mutex_unlock(&ptp->tsevq_mux);
return -ENODEV;
+ }
spin_lock_irqsave(&queue->lock, flags);
@@ -150,10 +153,8 @@
mutex_unlock(&ptp->tsevq_mux);
- if (copy_to_user(buf, event, cnt)) {
- mutex_unlock(&ptp->tsevq_mux);
+ if (copy_to_user(buf, event, cnt))
return -EFAULT;
- }
return cnt;
}
diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c
index e5f7b8fe..2bb8f45 100644
--- a/drivers/regulator/db8500-prcmu.c
+++ b/drivers/regulator/db8500-prcmu.c
@@ -266,7 +266,7 @@
* Regulator information
*/
static struct db8500_regulator_info
- db8500_regulator_info[DB8500_NUM_REGULATORS] = {
+db8500_regulator_info[DB8500_NUM_REGULATORS] = {
[DB8500_REGULATOR_VAPE] = {
.desc = {
.name = "db8500-vape",
@@ -492,11 +492,9 @@
info->desc.name, err);
/* if failing, unregister all earlier regulators */
- i--;
- while (i >= 0) {
+ while (--i >= 0) {
info = &db8500_regulator_info[i];
regulator_unregister(info->rdev);
- i--;
}
return err;
}
@@ -536,13 +534,7 @@
static int __init db8500_regulator_init(void)
{
- int ret;
-
- ret = platform_driver_register(&db8500_regulator_driver);
- if (ret < 0)
- return -ENODEV;
-
- return 0;
+ return platform_driver_register(&db8500_regulator_driver);
}
static void __exit db8500_regulator_exit(void)
diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index daff7fd..486ed81 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -139,7 +139,7 @@
s8 vid = -1, i;
if (!gpio_is_valid(max8952->pdata->gpio_vid0) ||
- !gpio_is_valid(max8952->pdata->gpio_vid0)) {
+ !gpio_is_valid(max8952->pdata->gpio_vid1)) {
/* DVS not supported */
return -EPERM;
}
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index 10d5a1d..ad6628c 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -39,25 +39,28 @@
struct regulator_dev **rdev;
int ramp_delay; /* in mV/us */
+ bool buck1_gpiodvs;
+ bool buck2_gpiodvs;
+ bool buck5_gpiodvs;
u8 buck1_vol[8];
u8 buck2_vol[8];
u8 buck5_vol[8];
+ int buck125_gpios[3];
int buck125_gpioindex;
+ bool ignore_gpiodvs_side_effect;
u8 saved_states[MAX8997_REG_MAX];
};
static inline void max8997_set_gpio(struct max8997_data *max8997)
{
- struct max8997_platform_data *pdata =
- dev_get_platdata(max8997->iodev->dev);
int set3 = (max8997->buck125_gpioindex) & 0x1;
int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1;
int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1;
- gpio_set_value(pdata->buck125_gpios[0], set1);
- gpio_set_value(pdata->buck125_gpios[1], set2);
- gpio_set_value(pdata->buck125_gpios[2], set3);
+ gpio_set_value(max8997->buck125_gpios[0], set1);
+ gpio_set_value(max8997->buck125_gpios[1], set2);
+ gpio_set_value(max8997->buck125_gpios[2], set3);
}
struct voltage_map_desc {
@@ -380,8 +383,6 @@
static int max8997_get_voltage(struct regulator_dev *rdev)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
- struct max8997_platform_data *pdata =
- dev_get_platdata(max8997->iodev->dev);
struct i2c_client *i2c = max8997->iodev->i2c;
int reg, shift, mask, ret;
int rid = max8997_get_rid(rdev);
@@ -391,9 +392,9 @@
if (ret)
return ret;
- if ((rid == MAX8997_BUCK1 && pdata->buck1_gpiodvs) ||
- (rid == MAX8997_BUCK2 && pdata->buck2_gpiodvs) ||
- (rid == MAX8997_BUCK5 && pdata->buck5_gpiodvs))
+ if ((rid == MAX8997_BUCK1 && max8997->buck1_gpiodvs) ||
+ (rid == MAX8997_BUCK2 && max8997->buck2_gpiodvs) ||
+ (rid == MAX8997_BUCK5 && max8997->buck5_gpiodvs))
reg += max8997->buck125_gpioindex;
ret = max8997_read_reg(i2c, reg, &val);
@@ -543,7 +544,8 @@
rid == MAX8997_BUCK4 || rid == MAX8997_BUCK5) {
/* If the voltage is increasing */
if (org < i)
- udelay(desc->step * (i - org) / max8997->ramp_delay);
+ udelay(DIV_ROUND_UP(desc->step * (i - org),
+ max8997->ramp_delay));
}
return ret;
@@ -561,8 +563,6 @@
u8 new_val, int *best)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
- struct max8997_platform_data *pdata =
- dev_get_platdata(max8997->iodev->dev);
int rid = max8997_get_rid(rdev);
u8 *buckx_val[3];
bool buckx_gpiodvs[3];
@@ -589,9 +589,9 @@
buckx_val[0] = max8997->buck1_vol;
buckx_val[1] = max8997->buck2_vol;
buckx_val[2] = max8997->buck5_vol;
- buckx_gpiodvs[0] = pdata->buck1_gpiodvs;
- buckx_gpiodvs[1] = pdata->buck2_gpiodvs;
- buckx_gpiodvs[2] = pdata->buck5_gpiodvs;
+ buckx_gpiodvs[0] = max8997->buck1_gpiodvs;
+ buckx_gpiodvs[1] = max8997->buck2_gpiodvs;
+ buckx_gpiodvs[2] = max8997->buck5_gpiodvs;
for (i = 0; i < 8; i++) {
int others;
@@ -640,8 +640,6 @@
int min_uV, int max_uV, unsigned *selector)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
- struct max8997_platform_data *pdata =
- dev_get_platdata(max8997->iodev->dev);
int rid = max8997_get_rid(rdev);
const struct voltage_map_desc *desc;
int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
@@ -653,15 +651,15 @@
switch (rid) {
case MAX8997_BUCK1:
- if (pdata->buck1_gpiodvs)
+ if (max8997->buck1_gpiodvs)
gpio_dvs_mode = true;
break;
case MAX8997_BUCK2:
- if (pdata->buck2_gpiodvs)
+ if (max8997->buck2_gpiodvs)
gpio_dvs_mode = true;
break;
case MAX8997_BUCK5:
- if (pdata->buck5_gpiodvs)
+ if (max8997->buck5_gpiodvs)
gpio_dvs_mode = true;
break;
}
@@ -695,7 +693,7 @@
new_idx = tmp_idx;
new_val = tmp_val;
- if (pdata->ignore_gpiodvs_side_effect == false)
+ if (max8997->ignore_gpiodvs_side_effect == false)
return -EINVAL;
dev_warn(&rdev->dev, "MAX8997 GPIO-DVS Side Effect Warning: GPIO SET:"
@@ -993,6 +991,11 @@
i2c = max8997->iodev->i2c;
max8997->buck125_gpioindex = pdata->buck125_default_idx;
+ max8997->buck1_gpiodvs = pdata->buck1_gpiodvs;
+ max8997->buck2_gpiodvs = pdata->buck2_gpiodvs;
+ max8997->buck5_gpiodvs = pdata->buck5_gpiodvs;
+ memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3);
+ max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect;
for (i = 0; i < 8; i++) {
max8997->buck1_vol[i] = ret =
@@ -1124,6 +1127,10 @@
0x3f);
}
+ /* Misc Settings */
+ max8997->ramp_delay = 10; /* set 10mV/us, which is the default */
+ max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9);
+
for (i = 0; i < pdata->num_regulators; i++) {
const struct voltage_map_desc *desc;
int id = pdata->regulators[i].id;
@@ -1148,10 +1155,6 @@
}
}
- /* Misc Settings */
- max8997->ramp_delay = 10; /* set 10mV/us, which is the default */
- max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9);
-
return 0;
err:
for (i = 0; i < max8997->num_regulators; i++)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index f822e13..ce2aabf 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1051,4 +1051,13 @@
Enable support for the Linux driver side of the Tilera
hypervisor's real-time clock interface.
+config RTC_DRV_PUV3
+ tristate "PKUnity v3 RTC support"
+ depends on ARCH_PUV3
+ help
+ This enables support for the RTC in the PKUnity-v3 SoCs.
+
+ This drive can also be built as a module. If so, the module
+ will be called rtc-puv3.
+
endif # RTC_CLASS
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 213d725..0ffefe8 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -78,6 +78,7 @@
obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
obj-$(CONFIG_RTC_DRV_PS3) += rtc-ps3.o
+obj-$(CONFIG_RTC_DRV_PUV3) += rtc-puv3.o
obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o
obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
obj-$(CONFIG_RTC_DRV_RP5C01) += rtc-rp5c01.o
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index ef6316a..df68618 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -318,7 +318,7 @@
}
EXPORT_SYMBOL_GPL(rtc_read_alarm);
-int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
+static int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
{
struct rtc_time tm;
long now, scheduled;
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index d0e06ed..cace6d3 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -421,7 +421,8 @@
err = ops->ioctl(rtc->dev.parent, cmd, arg);
if (err == -ENOIOCTLCMD)
err = -ENOTTY;
- }
+ } else
+ err = -ENOTTY;
break;
}
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 4724ba3..b2005b4 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -149,6 +149,7 @@
{ "ds1340", ds_1340 },
{ "ds3231", ds_3231 },
{ "m41t00", m41t00 },
+ { "pt7c4338", ds_1307 },
{ "rx8025", rx_8025 },
{ }
};
diff --git a/drivers/rtc/rtc-m41t93.c b/drivers/rtc/rtc-m41t93.c
index 1a84b3e..7317d3b 100644
--- a/drivers/rtc/rtc-m41t93.c
+++ b/drivers/rtc/rtc-m41t93.c
@@ -189,7 +189,7 @@
static int __devexit m41t93_remove(struct spi_device *spi)
{
- struct rtc_device *rtc = platform_get_drvdata(spi);
+ struct rtc_device *rtc = spi_get_drvdata(spi);
if (rtc)
rtc_device_unregister(rtc);
diff --git a/arch/unicore32/kernel/rtc.c b/drivers/rtc/rtc-puv3.c
similarity index 97%
rename from arch/unicore32/kernel/rtc.c
rename to drivers/rtc/rtc-puv3.c
index 8cad70b..46f14b8 100644
--- a/arch/unicore32/kernel/rtc.c
+++ b/drivers/rtc/rtc-puv3.c
@@ -1,7 +1,5 @@
/*
- * linux/arch/unicore32/kernel/rtc.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
+ * RTC driver code specific to PKUnity SoC and UniCore ISA
*
* Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
* Copyright (C) 2001-2010 Guan Xuetao
@@ -36,7 +34,6 @@
static DEFINE_SPINLOCK(puv3_rtc_pie_lock);
/* IRQ Handlers */
-
static irqreturn_t puv3_rtc_alarmirq(int irq, void *id)
{
struct rtc_device *rdev = id;
@@ -89,7 +86,6 @@
}
/* Time read/write */
-
static int puv3_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
{
rtc_time_to_tm(readl(RTC_RCNR), rtc_tm);
@@ -196,7 +192,6 @@
struct rtc_device *rtc_dev = platform_get_drvdata(pdev);
/* do not clear AIE here, it may be needed for wake */
-
puv3_rtc_setpie(dev, 0);
free_irq(puv3_rtc_alarmno, rtc_dev);
free_irq(puv3_rtc_tickno, rtc_dev);
@@ -218,7 +213,6 @@
writel(readl(RTC_RTSR) & ~RTC_RTSR_HZE, RTC_RTSR);
} else {
/* re-enable the device, and check it is ok */
-
if ((readl(RTC_RTSR) & RTC_RTSR_HZE) == 0) {
dev_info(&pdev->dev, "rtc disabled, re-enabling\n");
writel(readl(RTC_RTSR) | RTC_RTSR_HZE, RTC_RTSR);
@@ -251,7 +245,6 @@
pr_debug("%s: probe=%p\n", __func__, pdev);
/* find the IRQs */
-
puv3_rtc_tickno = platform_get_irq(pdev, 1);
if (puv3_rtc_tickno < 0) {
dev_err(&pdev->dev, "no irq for rtc tick\n");
@@ -268,7 +261,6 @@
puv3_rtc_tickno, puv3_rtc_alarmno);
/* get the memory region */
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "failed to get memory region resource\n");
@@ -288,7 +280,6 @@
puv3_rtc_enable(pdev, 1);
/* register RTC and exit */
-
rtc = rtc_device_register("pkunity", &pdev->dev, &puv3_rtcops,
THIS_MODULE);
@@ -315,8 +306,6 @@
#ifdef CONFIG_PM
-/* RTC Power management control */
-
static int ticnt_save;
static int puv3_rtc_suspend(struct platform_device *pdev, pm_message_t state)
@@ -368,4 +357,3 @@
MODULE_DESCRIPTION("RTC Driver for the PKUnity v3 chip");
MODULE_AUTHOR("Hu Dongliang");
MODULE_LICENSE("GPL v2");
-
diff --git a/drivers/rtc/rtc-vt8500.c b/drivers/rtc/rtc-vt8500.c
index b8bc862..efd6066 100644
--- a/drivers/rtc/rtc-vt8500.c
+++ b/drivers/rtc/rtc-vt8500.c
@@ -78,7 +78,6 @@
void __iomem *regbase;
struct resource *res;
int irq_alarm;
- int irq_hz;
struct rtc_device *rtc;
spinlock_t lock; /* Protects this structure */
};
@@ -100,10 +99,6 @@
if (isr & 1)
events |= RTC_AF | RTC_IRQF;
- /* Only second/minute interrupts are supported */
- if (isr & 2)
- events |= RTC_UF | RTC_IRQF;
-
rtc_update_irq(vt8500_rtc->rtc, 1, events);
return IRQ_HANDLED;
@@ -199,27 +194,12 @@
return 0;
}
-static int vt8500_update_irq_enable(struct device *dev, unsigned int enabled)
-{
- struct vt8500_rtc *vt8500_rtc = dev_get_drvdata(dev);
- unsigned long tmp = readl(vt8500_rtc->regbase + VT8500_RTC_CR);
-
- if (enabled)
- tmp |= VT8500_RTC_CR_SM_SEC | VT8500_RTC_CR_SM_ENABLE;
- else
- tmp &= ~VT8500_RTC_CR_SM_ENABLE;
-
- writel(tmp, vt8500_rtc->regbase + VT8500_RTC_CR);
- return 0;
-}
-
static const struct rtc_class_ops vt8500_rtc_ops = {
.read_time = vt8500_rtc_read_time,
.set_time = vt8500_rtc_set_time,
.read_alarm = vt8500_rtc_read_alarm,
.set_alarm = vt8500_rtc_set_alarm,
.alarm_irq_enable = vt8500_alarm_irq_enable,
- .update_irq_enable = vt8500_update_irq_enable,
};
static int __devinit vt8500_rtc_probe(struct platform_device *pdev)
@@ -248,13 +228,6 @@
goto err_free;
}
- vt8500_rtc->irq_hz = platform_get_irq(pdev, 1);
- if (vt8500_rtc->irq_hz < 0) {
- dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n");
- ret = -ENXIO;
- goto err_free;
- }
-
vt8500_rtc->res = request_mem_region(vt8500_rtc->res->start,
resource_size(vt8500_rtc->res),
"vt8500-rtc");
@@ -272,9 +245,8 @@
goto err_release;
}
- /* Enable the second/minute interrupt generation and enable RTC */
- writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H
- | VT8500_RTC_CR_SM_ENABLE | VT8500_RTC_CR_SM_SEC,
+ /* Enable RTC and set it to 24-hour mode */
+ writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H,
vt8500_rtc->regbase + VT8500_RTC_CR);
vt8500_rtc->rtc = rtc_device_register("vt8500-rtc", &pdev->dev,
@@ -286,26 +258,16 @@
goto err_unmap;
}
- ret = request_irq(vt8500_rtc->irq_hz, vt8500_rtc_irq, 0,
- "rtc 1Hz", vt8500_rtc);
- if (ret < 0) {
- dev_err(&pdev->dev, "can't get irq %i, err %d\n",
- vt8500_rtc->irq_hz, ret);
- goto err_unreg;
- }
-
ret = request_irq(vt8500_rtc->irq_alarm, vt8500_rtc_irq, 0,
"rtc alarm", vt8500_rtc);
if (ret < 0) {
dev_err(&pdev->dev, "can't get irq %i, err %d\n",
vt8500_rtc->irq_alarm, ret);
- goto err_free_hz;
+ goto err_unreg;
}
return 0;
-err_free_hz:
- free_irq(vt8500_rtc->irq_hz, vt8500_rtc);
err_unreg:
rtc_device_unregister(vt8500_rtc->rtc);
err_unmap:
@@ -323,7 +285,6 @@
struct vt8500_rtc *vt8500_rtc = platform_get_drvdata(pdev);
free_irq(vt8500_rtc->irq_alarm, vt8500_rtc);
- free_irq(vt8500_rtc->irq_hz, vt8500_rtc);
rtc_device_unregister(vt8500_rtc->rtc);
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 55e8f72..570d4da 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -416,7 +416,7 @@
/* special handling for no target buffer empty */
if ((!q->is_input_q &&
- (q->sbal[q->first_to_check]->element[15].flags & 0xff) == 0x10)) {
+ (q->sbal[q->first_to_check]->element[15].sflags) == 0x10)) {
qperf_inc(q, target_full);
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "OUTFULL FTC:%02x",
q->first_to_check);
@@ -427,8 +427,8 @@
DBF_ERROR((q->is_input_q) ? "IN:%2d" : "OUT:%2d", q->nr);
DBF_ERROR("FTC:%3d C:%3d", q->first_to_check, count);
DBF_ERROR("F14:%2x F15:%2x",
- q->sbal[q->first_to_check]->element[14].flags & 0xff,
- q->sbal[q->first_to_check]->element[15].flags & 0xff);
+ q->sbal[q->first_to_check]->element[14].sflags,
+ q->sbal[q->first_to_check]->element[15].sflags);
/*
* Interrupts may be avoided as long as the error is present
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 55c6aa1..d3cee33 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -361,7 +361,7 @@
static inline int qeth_is_last_sbale(struct qdio_buffer_element *sbale)
{
- return (sbale->flags & SBAL_FLAGS_LAST_ENTRY);
+ return (sbale->eflags & SBAL_EFLAGS_LAST_ENTRY);
}
enum qeth_qdio_buffer_states {
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 503678a..dd08f7b 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -890,7 +890,7 @@
struct sk_buff *skb;
/* is PCI flag set on buffer? */
- if (buf->buffer->element[0].flags & 0x40)
+ if (buf->buffer->element[0].sflags & SBAL_SFLAGS0_PCI_REQ)
atomic_dec(&queue->set_pci_flags_count);
skb = skb_dequeue(&buf->skb_list);
@@ -906,9 +906,11 @@
buf->is_header[i] = 0;
buf->buffer->element[i].length = 0;
buf->buffer->element[i].addr = NULL;
- buf->buffer->element[i].flags = 0;
+ buf->buffer->element[i].eflags = 0;
+ buf->buffer->element[i].sflags = 0;
}
- buf->buffer->element[15].flags = 0;
+ buf->buffer->element[15].eflags = 0;
+ buf->buffer->element[15].sflags = 0;
buf->next_element_to_fill = 0;
atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY);
}
@@ -2368,9 +2370,10 @@
buf->buffer->element[i].length = PAGE_SIZE;
buf->buffer->element[i].addr = pool_entry->elements[i];
if (i == QETH_MAX_BUFFER_ELEMENTS(card) - 1)
- buf->buffer->element[i].flags = SBAL_FLAGS_LAST_ENTRY;
+ buf->buffer->element[i].eflags = SBAL_EFLAGS_LAST_ENTRY;
else
- buf->buffer->element[i].flags = 0;
+ buf->buffer->element[i].eflags = 0;
+ buf->buffer->element[i].sflags = 0;
}
return 0;
}
@@ -2718,11 +2721,11 @@
if (qdio_error) {
QETH_CARD_TEXT(card, 2, dbftext);
QETH_CARD_TEXT_(card, 2, " F15=%02X",
- buf->element[15].flags & 0xff);
+ buf->element[15].sflags);
QETH_CARD_TEXT_(card, 2, " F14=%02X",
- buf->element[14].flags & 0xff);
+ buf->element[14].sflags);
QETH_CARD_TEXT_(card, 2, " qerr=%X", qdio_error);
- if ((buf->element[15].flags & 0xff) == 0x12) {
+ if ((buf->element[15].sflags) == 0x12) {
card->stats.rx_dropped++;
return 0;
} else
@@ -2798,7 +2801,7 @@
static int qeth_handle_send_error(struct qeth_card *card,
struct qeth_qdio_out_buffer *buffer, unsigned int qdio_err)
{
- int sbalf15 = buffer->buffer->element[15].flags & 0xff;
+ int sbalf15 = buffer->buffer->element[15].sflags;
QETH_CARD_TEXT(card, 6, "hdsnderr");
if (card->info.type == QETH_CARD_TYPE_IQD) {
@@ -2907,8 +2910,8 @@
for (i = index; i < index + count; ++i) {
buf = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q];
- buf->buffer->element[buf->next_element_to_fill - 1].flags |=
- SBAL_FLAGS_LAST_ENTRY;
+ buf->buffer->element[buf->next_element_to_fill - 1].eflags |=
+ SBAL_EFLAGS_LAST_ENTRY;
if (queue->card->info.type == QETH_CARD_TYPE_IQD)
continue;
@@ -2921,7 +2924,7 @@
/* it's likely that we'll go to packing
* mode soon */
atomic_inc(&queue->set_pci_flags_count);
- buf->buffer->element[0].flags |= 0x40;
+ buf->buffer->element[0].sflags |= SBAL_SFLAGS0_PCI_REQ;
}
} else {
if (!atomic_read(&queue->set_pci_flags_count)) {
@@ -2934,7 +2937,7 @@
* further send was requested by the stack
*/
atomic_inc(&queue->set_pci_flags_count);
- buf->buffer->element[0].flags |= 0x40;
+ buf->buffer->element[0].sflags |= SBAL_SFLAGS0_PCI_REQ;
}
}
}
@@ -3180,20 +3183,20 @@
if (!length) {
if (first_lap)
if (skb_shinfo(skb)->nr_frags)
- buffer->element[element].flags =
- SBAL_FLAGS_FIRST_FRAG;
+ buffer->element[element].eflags =
+ SBAL_EFLAGS_FIRST_FRAG;
else
- buffer->element[element].flags = 0;
+ buffer->element[element].eflags = 0;
else
- buffer->element[element].flags =
- SBAL_FLAGS_MIDDLE_FRAG;
+ buffer->element[element].eflags =
+ SBAL_EFLAGS_MIDDLE_FRAG;
} else {
if (first_lap)
- buffer->element[element].flags =
- SBAL_FLAGS_FIRST_FRAG;
+ buffer->element[element].eflags =
+ SBAL_EFLAGS_FIRST_FRAG;
else
- buffer->element[element].flags =
- SBAL_FLAGS_MIDDLE_FRAG;
+ buffer->element[element].eflags =
+ SBAL_EFLAGS_MIDDLE_FRAG;
}
data += length_here;
element++;
@@ -3205,12 +3208,12 @@
buffer->element[element].addr = (char *)page_to_phys(frag->page)
+ frag->page_offset;
buffer->element[element].length = frag->size;
- buffer->element[element].flags = SBAL_FLAGS_MIDDLE_FRAG;
+ buffer->element[element].eflags = SBAL_EFLAGS_MIDDLE_FRAG;
element++;
}
- if (buffer->element[element - 1].flags)
- buffer->element[element - 1].flags = SBAL_FLAGS_LAST_FRAG;
+ if (buffer->element[element - 1].eflags)
+ buffer->element[element - 1].eflags = SBAL_EFLAGS_LAST_FRAG;
*next_element_to_fill = element;
}
@@ -3234,7 +3237,7 @@
/*fill first buffer entry only with header information */
buffer->element[element].addr = skb->data;
buffer->element[element].length = hdr_len;
- buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG;
+ buffer->element[element].eflags = SBAL_EFLAGS_FIRST_FRAG;
buf->next_element_to_fill++;
skb->data += hdr_len;
skb->len -= hdr_len;
@@ -3246,7 +3249,7 @@
buffer->element[element].addr = hdr;
buffer->element[element].length = sizeof(struct qeth_hdr) +
hd_len;
- buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG;
+ buffer->element[element].eflags = SBAL_EFLAGS_FIRST_FRAG;
buf->is_header[element] = 1;
buf->next_element_to_fill++;
}
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 8512b5c..022fb6a 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -640,7 +640,7 @@
}
static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_qdio *qdio,
- u32 fsf_cmd, u32 sbtype,
+ u32 fsf_cmd, u8 sbtype,
mempool_t *pool)
{
struct zfcp_adapter *adapter = qdio->adapter;
@@ -841,7 +841,7 @@
if (zfcp_qdio_sbal_get(qdio))
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_ABORT_FCP_CMND,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.scsi_abort);
if (IS_ERR(req)) {
req = NULL;
@@ -1012,7 +1012,7 @@
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_GENERIC,
- SBAL_FLAGS0_TYPE_WRITE_READ, pool);
+ SBAL_SFLAGS0_TYPE_WRITE_READ, pool);
if (IS_ERR(req)) {
ret = PTR_ERR(req);
@@ -1110,7 +1110,7 @@
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_SEND_ELS,
- SBAL_FLAGS0_TYPE_WRITE_READ, NULL);
+ SBAL_SFLAGS0_TYPE_WRITE_READ, NULL);
if (IS_ERR(req)) {
ret = PTR_ERR(req);
@@ -1156,7 +1156,7 @@
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
@@ -1198,7 +1198,7 @@
goto out_unlock;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_CONFIG_DATA,
- SBAL_FLAGS0_TYPE_READ, NULL);
+ SBAL_SFLAGS0_TYPE_READ, NULL);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
@@ -1250,7 +1250,7 @@
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
@@ -1296,7 +1296,7 @@
goto out_unlock;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_EXCHANGE_PORT_DATA,
- SBAL_FLAGS0_TYPE_READ, NULL);
+ SBAL_SFLAGS0_TYPE_READ, NULL);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
@@ -1412,7 +1412,7 @@
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
@@ -1478,7 +1478,7 @@
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PORT,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
@@ -1553,7 +1553,7 @@
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_PORT_WITH_DID,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
@@ -1606,7 +1606,7 @@
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PORT,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
@@ -1698,7 +1698,7 @@
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_PHYSICAL_PORT,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
@@ -1812,7 +1812,7 @@
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_OPEN_LUN,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
adapter->pool.erp_req);
if (IS_ERR(req)) {
@@ -1901,7 +1901,7 @@
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_CLOSE_LUN,
- SBAL_FLAGS0_TYPE_READ,
+ SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
if (IS_ERR(req)) {
@@ -2161,7 +2161,7 @@
{
struct zfcp_fsf_req *req;
struct fcp_cmnd *fcp_cmnd;
- unsigned int sbtype = SBAL_FLAGS0_TYPE_READ;
+ u8 sbtype = SBAL_SFLAGS0_TYPE_READ;
int real_bytes, retval = -EIO, dix_bytes = 0;
struct scsi_device *sdev = scsi_cmnd->device;
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
@@ -2181,7 +2181,7 @@
}
if (scsi_cmnd->sc_data_direction == DMA_TO_DEVICE)
- sbtype = SBAL_FLAGS0_TYPE_WRITE;
+ sbtype = SBAL_SFLAGS0_TYPE_WRITE;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_FCP_CMND,
sbtype, adapter->pool.scsi_req);
@@ -2280,7 +2280,7 @@
goto out;
req = zfcp_fsf_req_create(qdio, FSF_QTCB_FCP_CMND,
- SBAL_FLAGS0_TYPE_WRITE,
+ SBAL_SFLAGS0_TYPE_WRITE,
qdio->adapter->pool.scsi_req);
if (IS_ERR(req)) {
@@ -2328,17 +2328,18 @@
struct zfcp_qdio *qdio = adapter->qdio;
struct zfcp_fsf_req *req = NULL;
struct fsf_qtcb_bottom_support *bottom;
- int direction, retval = -EIO, bytes;
+ int retval = -EIO, bytes;
+ u8 direction;
if (!(adapter->adapter_features & FSF_FEATURE_CFDC))
return ERR_PTR(-EOPNOTSUPP);
switch (fsf_cfdc->command) {
case FSF_QTCB_DOWNLOAD_CONTROL_FILE:
- direction = SBAL_FLAGS0_TYPE_WRITE;
+ direction = SBAL_SFLAGS0_TYPE_WRITE;
break;
case FSF_QTCB_UPLOAD_CONTROL_FILE:
- direction = SBAL_FLAGS0_TYPE_READ;
+ direction = SBAL_SFLAGS0_TYPE_READ;
break;
default:
return ERR_PTR(-EINVAL);
@@ -2413,7 +2414,7 @@
fsf_req->qdio_req.sbal_response = sbal_idx;
zfcp_fsf_req_complete(fsf_req);
- if (likely(sbale->flags & SBAL_FLAGS_LAST_ENTRY))
+ if (likely(sbale->eflags & SBAL_EFLAGS_LAST_ENTRY))
break;
}
}
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 98e97d9..d9c40ea 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -124,7 +124,7 @@
/* set last entry flag in current SBALE of current SBAL */
sbale = zfcp_qdio_sbale_curr(qdio, q_req);
- sbale->flags |= SBAL_FLAGS_LAST_ENTRY;
+ sbale->eflags |= SBAL_EFLAGS_LAST_ENTRY;
/* don't exceed last allowed SBAL */
if (q_req->sbal_last == q_req->sbal_limit)
@@ -132,7 +132,7 @@
/* set chaining flag in first SBALE of current SBAL */
sbale = zfcp_qdio_sbale_req(qdio, q_req);
- sbale->flags |= SBAL_FLAGS0_MORE_SBALS;
+ sbale->sflags |= SBAL_SFLAGS0_MORE_SBALS;
/* calculate index of next SBAL */
q_req->sbal_last++;
@@ -147,7 +147,7 @@
/* set storage-block type for new SBAL */
sbale = zfcp_qdio_sbale_curr(qdio, q_req);
- sbale->flags |= q_req->sbtype;
+ sbale->sflags |= q_req->sbtype;
return sbale;
}
@@ -177,7 +177,7 @@
/* set storage-block type for this request */
sbale = zfcp_qdio_sbale_req(qdio, q_req);
- sbale->flags |= q_req->sbtype;
+ sbale->sflags |= q_req->sbtype;
for (; sg; sg = sg_next(sg)) {
sbale = zfcp_qdio_sbale_next(qdio, q_req);
@@ -384,7 +384,8 @@
for (cc = 0; cc < QDIO_MAX_BUFFERS_PER_Q; cc++) {
sbale = &(qdio->res_q[cc]->element[0]);
sbale->length = 0;
- sbale->flags = SBAL_FLAGS_LAST_ENTRY;
+ sbale->eflags = SBAL_EFLAGS_LAST_ENTRY;
+ sbale->sflags = 0;
sbale->addr = NULL;
}
diff --git a/drivers/s390/scsi/zfcp_qdio.h b/drivers/s390/scsi/zfcp_qdio.h
index 2297d8d..54e22ac 100644
--- a/drivers/s390/scsi/zfcp_qdio.h
+++ b/drivers/s390/scsi/zfcp_qdio.h
@@ -67,7 +67,7 @@
* @qdio_outb_usage: usage of outbound queue
*/
struct zfcp_qdio_req {
- u32 sbtype;
+ u8 sbtype;
u8 sbal_number;
u8 sbal_first;
u8 sbal_last;
@@ -116,7 +116,7 @@
*/
static inline
void zfcp_qdio_req_init(struct zfcp_qdio *qdio, struct zfcp_qdio_req *q_req,
- unsigned long req_id, u32 sbtype, void *data, u32 len)
+ unsigned long req_id, u8 sbtype, void *data, u32 len)
{
struct qdio_buffer_element *sbale;
int count = min(atomic_read(&qdio->req_q_free),
@@ -131,7 +131,8 @@
sbale = zfcp_qdio_sbale_req(qdio, q_req);
sbale->addr = (void *) req_id;
- sbale->flags = SBAL_FLAGS0_COMMAND | sbtype;
+ sbale->eflags = 0;
+ sbale->sflags = SBAL_SFLAGS0_COMMAND | sbtype;
if (unlikely(!data))
return;
@@ -173,7 +174,7 @@
struct qdio_buffer_element *sbale;
sbale = zfcp_qdio_sbale_curr(qdio, q_req);
- sbale->flags |= SBAL_FLAGS_LAST_ENTRY;
+ sbale->eflags |= SBAL_EFLAGS_LAST_ENTRY;
}
/**
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 4a1f029..8d9dae8 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -830,6 +830,19 @@
To compile this driver as a module, choose M here: the
module will be called gdth.
+config SCSI_ISCI
+ tristate "Intel(R) C600 Series Chipset SAS Controller"
+ depends on PCI && SCSI
+ depends on X86
+ # (temporary): known alpha quality driver
+ depends on EXPERIMENTAL
+ select SCSI_SAS_LIBSAS
+ ---help---
+ This driver supports the 6Gb/s SAS capabilities of the storage
+ control unit found in the Intel(R) C600 series chipset.
+
+ The experimental tag will be removed after the driver exits alpha
+
config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI PIO support"
depends on ISA && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 7ad0b8a..3c08f53 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -73,6 +73,7 @@
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
obj-$(CONFIG_SCSI_PM8001) += pm8001/
+obj-$(CONFIG_SCSI_ISCI) += isci/
obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index c6c0434..6bba23a 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1037,6 +1037,7 @@
unsigned char sense_key;
unsigned char asc; /* additional sense code */
unsigned char ascq; /* additional sense code qualifier */
+ unsigned long sense_data_size;
ei = cp->err_info;
cmd = (struct scsi_cmnd *) cp->scsi_cmd;
@@ -1051,10 +1052,14 @@
cmd->result |= ei->ScsiStatus;
/* copy the sense data whether we need to or not. */
- memcpy(cmd->sense_buffer, ei->SenseInfo,
- ei->SenseLen > SCSI_SENSE_BUFFERSIZE ?
- SCSI_SENSE_BUFFERSIZE :
- ei->SenseLen);
+ if (SCSI_SENSE_BUFFERSIZE < sizeof(ei->SenseInfo))
+ sense_data_size = SCSI_SENSE_BUFFERSIZE;
+ else
+ sense_data_size = sizeof(ei->SenseInfo);
+ if (ei->SenseLen < sense_data_size)
+ sense_data_size = ei->SenseLen;
+
+ memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size);
scsi_set_resid(cmd, ei->ResidualCnt);
if (ei->CommandStatus == 0) {
@@ -2580,7 +2585,8 @@
c->SG[0].Ext = 0; /* we are not chaining*/
}
hpsa_scsi_do_simple_cmd_core(h, c);
- hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL);
+ if (iocommand.buf_size > 0)
+ hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL);
check_ioctl_unit_attention(h, c);
/* Copy the error information out */
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index b765061..bdfa223 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -4306,8 +4306,8 @@
spin_lock_irqsave(vhost->host->host_lock, flags);
if (rc == H_CLOSED)
vio_enable_interrupts(to_vio_dev(vhost->dev));
- else if (rc || (rc = ibmvfc_send_crq_init(vhost)) ||
- (rc = vio_enable_interrupts(to_vio_dev(vhost->dev)))) {
+ if (rc || (rc = ibmvfc_send_crq_init(vhost)) ||
+ (rc = vio_enable_interrupts(to_vio_dev(vhost->dev)))) {
ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
dev_err(vhost->dev, "Error after reset (rc=%d)\n", rc);
}
diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile
new file mode 100644
index 0000000..3359e10
--- /dev/null
+++ b/drivers/scsi/isci/Makefile
@@ -0,0 +1,8 @@
+obj-$(CONFIG_SCSI_ISCI) += isci.o
+isci-objs := init.o phy.o request.o \
+ remote_device.o port.o \
+ host.o task.o probe_roms.o \
+ remote_node_context.o \
+ remote_node_table.o \
+ unsolicited_frame_control.o \
+ port_config.o \
diff --git a/drivers/scsi/isci/firmware/Makefile b/drivers/scsi/isci/firmware/Makefile
new file mode 100644
index 0000000..5f54461
--- /dev/null
+++ b/drivers/scsi/isci/firmware/Makefile
@@ -0,0 +1,19 @@
+# Makefile for create_fw
+#
+CC=gcc
+CFLAGS=-c -Wall -O2 -g
+LDFLAGS=
+SOURCES=create_fw.c
+OBJECTS=$(SOURCES:.cpp=.o)
+EXECUTABLE=create_fw
+
+all: $(SOURCES) $(EXECUTABLE)
+
+$(EXECUTABLE): $(OBJECTS)
+ $(CC) $(LDFLAGS) $(OBJECTS) -o $@
+
+.c.o:
+ $(CC) $(CFLAGS) $< -O $@
+
+clean:
+ rm -f *.o $(EXECUTABLE)
diff --git a/drivers/scsi/isci/firmware/README b/drivers/scsi/isci/firmware/README
new file mode 100644
index 0000000..8056d2b
--- /dev/null
+++ b/drivers/scsi/isci/firmware/README
@@ -0,0 +1,36 @@
+This defines the temporary binary blow we are to pass to the SCU
+driver to emulate the binary firmware that we will eventually be
+able to access via NVRAM on the SCU controller.
+
+The current size of the binary blob is expected to be 149 bytes or larger
+
+Header Types:
+0x1: Phy Masks
+0x2: Phy Gens
+0x3: SAS Addrs
+0xff: End of Data
+
+ID string - u8[12]: "#SCU MAGIC#\0"
+Version - u8: 1
+SubVersion - u8: 0
+
+Header Type - u8: 0x1
+Size - u8: 8
+Phy Mask - u32[8]
+
+Header Type - u8: 0x2
+Size - u8: 8
+Phy Gen - u32[8]
+
+Header Type - u8: 0x3
+Size - u8: 8
+Sas Addr - u64[8]
+
+Header Type - u8: 0xf
+
+
+==============================================================================
+
+Place isci_firmware.bin in /lib/firmware
+Be sure to recreate the initramfs image to include the firmware.
+
diff --git a/drivers/scsi/isci/firmware/create_fw.c b/drivers/scsi/isci/firmware/create_fw.c
new file mode 100644
index 0000000..c7a2887
--- /dev/null
+++ b/drivers/scsi/isci/firmware/create_fw.c
@@ -0,0 +1,99 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <string.h>
+#include <errno.h>
+#include <asm/types.h>
+#include <strings.h>
+#include <stdint.h>
+
+#include "create_fw.h"
+#include "../probe_roms.h"
+
+int write_blob(struct isci_orom *isci_orom)
+{
+ FILE *fd;
+ int err;
+ size_t count;
+
+ fd = fopen(blob_name, "w+");
+ if (!fd) {
+ perror("Open file for write failed");
+ fclose(fd);
+ return -EIO;
+ }
+
+ count = fwrite(isci_orom, sizeof(struct isci_orom), 1, fd);
+ if (count != 1) {
+ perror("Write data failed");
+ fclose(fd);
+ return -EIO;
+ }
+
+ fclose(fd);
+
+ return 0;
+}
+
+void set_binary_values(struct isci_orom *isci_orom)
+{
+ int ctrl_idx, phy_idx, port_idx;
+
+ /* setting OROM signature */
+ strncpy(isci_orom->hdr.signature, sig, strlen(sig));
+ isci_orom->hdr.version = version;
+ isci_orom->hdr.total_block_length = sizeof(struct isci_orom);
+ isci_orom->hdr.hdr_length = sizeof(struct sci_bios_oem_param_block_hdr);
+ isci_orom->hdr.num_elements = num_elements;
+
+ for (ctrl_idx = 0; ctrl_idx < 2; ctrl_idx++) {
+ isci_orom->ctrl[ctrl_idx].controller.mode_type = mode_type;
+ isci_orom->ctrl[ctrl_idx].controller.max_concurrent_dev_spin_up =
+ max_num_concurrent_dev_spin_up;
+ isci_orom->ctrl[ctrl_idx].controller.do_enable_ssc =
+ enable_ssc;
+
+ for (port_idx = 0; port_idx < 4; port_idx++)
+ isci_orom->ctrl[ctrl_idx].ports[port_idx].phy_mask =
+ phy_mask[ctrl_idx][port_idx];
+
+ for (phy_idx = 0; phy_idx < 4; phy_idx++) {
+ isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.high =
+ (__u32)(sas_addr[ctrl_idx][phy_idx] >> 32);
+ isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.low =
+ (__u32)(sas_addr[ctrl_idx][phy_idx]);
+
+ isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control0 =
+ afe_tx_amp_control0;
+ isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control1 =
+ afe_tx_amp_control1;
+ isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control2 =
+ afe_tx_amp_control2;
+ isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control3 =
+ afe_tx_amp_control3;
+ }
+ }
+}
+
+int main(void)
+{
+ int err;
+ struct isci_orom *isci_orom;
+
+ isci_orom = malloc(sizeof(struct isci_orom));
+ memset(isci_orom, 0, sizeof(struct isci_orom));
+
+ set_binary_values(isci_orom);
+
+ err = write_blob(isci_orom);
+ if (err < 0) {
+ free(isci_orom);
+ return err;
+ }
+
+ free(isci_orom);
+ return 0;
+}
diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h
new file mode 100644
index 0000000..5f29882
--- /dev/null
+++ b/drivers/scsi/isci/firmware/create_fw.h
@@ -0,0 +1,77 @@
+#ifndef _CREATE_FW_H_
+#define _CREATE_FW_H_
+#include "../probe_roms.h"
+
+
+/* we are configuring for 2 SCUs */
+static const int num_elements = 2;
+
+/*
+ * For all defined arrays:
+ * elements 0-3 are for SCU0, ports 0-3
+ * elements 4-7 are for SCU1, ports 0-3
+ *
+ * valid configurations for one SCU are:
+ * P0 P1 P2 P3
+ * ----------------
+ * 0xF,0x0,0x0,0x0 # 1 x4 port
+ * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1
+ * # ports
+ * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2
+ * # port
+ * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port
+ * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration)
+ *
+ * if there is a port/phy on which you do not wish to override the default
+ * values, use the value assigned to UNINIT_PARAM (255).
+ */
+
+/* discovery mode type (port auto config mode by default ) */
+
+/*
+ * if there is a port/phy on which you do not wish to override the default
+ * values, use the value "0000000000000000". SAS address of zero's is
+ * considered invalid and will not be used.
+ */
+#ifdef MPC
+static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE;
+static const __u8 phy_mask[2][4] = { {1, 2, 4, 8},
+ {1, 2, 4, 8} };
+static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL,
+ 0x5FCFFFFFF0000002ULL,
+ 0x5FCFFFFFF0000003ULL,
+ 0x5FCFFFFFF0000004ULL },
+ { 0x5FCFFFFFF0000005ULL,
+ 0x5FCFFFFFF0000006ULL,
+ 0x5FCFFFFFF0000007ULL,
+ 0x5FCFFFFFF0000008ULL } };
+#else /* APC (default) */
+static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
+static const __u8 phy_mask[2][4];
+static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL,
+ 0x5FCFFFFF00000001ULL,
+ 0x5FCFFFFF00000001ULL,
+ 0x5FCFFFFF00000001ULL },
+ { 0x5FCFFFFF00000002ULL,
+ 0x5FCFFFFF00000002ULL,
+ 0x5FCFFFFF00000002ULL,
+ 0x5FCFFFFF00000002ULL } };
+#endif
+
+/* Maximum number of concurrent device spin up */
+static const int max_num_concurrent_dev_spin_up = 1;
+
+/* enable of ssc operation */
+static const int enable_ssc;
+
+/* AFE_TX_AMP_CONTROL */
+static const unsigned int afe_tx_amp_control0 = 0x000bdd08;
+static const unsigned int afe_tx_amp_control1 = 0x000ffc00;
+static const unsigned int afe_tx_amp_control2 = 0x000b7c09;
+static const unsigned int afe_tx_amp_control3 = 0x000afc6e;
+
+static const char blob_name[] = "isci_firmware.bin";
+static const char sig[] = "ISCUOEMB";
+static const unsigned char version = 0x10;
+
+#endif
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
new file mode 100644
index 0000000..26072f1
--- /dev/null
+++ b/drivers/scsi/isci/host.c
@@ -0,0 +1,2751 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <linux/circ_buf.h>
+#include <linux/device.h>
+#include <scsi/sas.h>
+#include "host.h"
+#include "isci.h"
+#include "port.h"
+#include "host.h"
+#include "probe_roms.h"
+#include "remote_device.h"
+#include "request.h"
+#include "scu_completion_codes.h"
+#include "scu_event_codes.h"
+#include "registers.h"
+#include "scu_remote_node_context.h"
+#include "scu_task_context.h"
+
+#define SCU_CONTEXT_RAM_INIT_STALL_TIME 200
+
+#define smu_max_ports(dcc_value) \
+ (\
+ (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \
+ )
+
+#define smu_max_task_contexts(dcc_value) \
+ (\
+ (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \
+ )
+
+#define smu_max_rncs(dcc_value) \
+ (\
+ (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \
+ )
+
+#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100
+
+/**
+ *
+ *
+ * The number of milliseconds to wait while a given phy is consuming power
+ * before allowing another set of phys to consume power. Ultimately, this will
+ * be specified by OEM parameter.
+ */
+#define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500
+
+/**
+ * NORMALIZE_PUT_POINTER() -
+ *
+ * This macro will normalize the completion queue put pointer so its value can
+ * be used as an array inde
+ */
+#define NORMALIZE_PUT_POINTER(x) \
+ ((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK)
+
+
+/**
+ * NORMALIZE_EVENT_POINTER() -
+ *
+ * This macro will normalize the completion queue event entry so its value can
+ * be used as an index.
+ */
+#define NORMALIZE_EVENT_POINTER(x) \
+ (\
+ ((x) & SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK) \
+ >> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \
+ )
+
+/**
+ * NORMALIZE_GET_POINTER() -
+ *
+ * This macro will normalize the completion queue get pointer so its value can
+ * be used as an index into an array
+ */
+#define NORMALIZE_GET_POINTER(x) \
+ ((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK)
+
+/**
+ * NORMALIZE_GET_POINTER_CYCLE_BIT() -
+ *
+ * This macro will normalize the completion queue cycle pointer so it matches
+ * the completion queue cycle bit
+ */
+#define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \
+ ((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT))
+
+/**
+ * COMPLETION_QUEUE_CYCLE_BIT() -
+ *
+ * This macro will return the cycle bit of the completion queue entry
+ */
+#define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000)
+
+/* Init the state machine and call the state entry function (if any) */
+void sci_init_sm(struct sci_base_state_machine *sm,
+ const struct sci_base_state *state_table, u32 initial_state)
+{
+ sci_state_transition_t handler;
+
+ sm->initial_state_id = initial_state;
+ sm->previous_state_id = initial_state;
+ sm->current_state_id = initial_state;
+ sm->state_table = state_table;
+
+ handler = sm->state_table[initial_state].enter_state;
+ if (handler)
+ handler(sm);
+}
+
+/* Call the state exit fn, update the current state, call the state entry fn */
+void sci_change_state(struct sci_base_state_machine *sm, u32 next_state)
+{
+ sci_state_transition_t handler;
+
+ handler = sm->state_table[sm->current_state_id].exit_state;
+ if (handler)
+ handler(sm);
+
+ sm->previous_state_id = sm->current_state_id;
+ sm->current_state_id = next_state;
+
+ handler = sm->state_table[sm->current_state_id].enter_state;
+ if (handler)
+ handler(sm);
+}
+
+static bool sci_controller_completion_queue_has_entries(struct isci_host *ihost)
+{
+ u32 get_value = ihost->completion_queue_get;
+ u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK;
+
+ if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) ==
+ COMPLETION_QUEUE_CYCLE_BIT(ihost->completion_queue[get_index]))
+ return true;
+
+ return false;
+}
+
+static bool sci_controller_isr(struct isci_host *ihost)
+{
+ if (sci_controller_completion_queue_has_entries(ihost)) {
+ return true;
+ } else {
+ /*
+ * we have a spurious interrupt it could be that we have already
+ * emptied the completion queue from a previous interrupt */
+ writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status);
+
+ /*
+ * There is a race in the hardware that could cause us not to be notified
+ * of an interrupt completion if we do not take this step. We will mask
+ * then unmask the interrupts so if there is another interrupt pending
+ * the clearing of the interrupt source we get the next interrupt message. */
+ writel(0xFF000000, &ihost->smu_registers->interrupt_mask);
+ writel(0, &ihost->smu_registers->interrupt_mask);
+ }
+
+ return false;
+}
+
+irqreturn_t isci_msix_isr(int vec, void *data)
+{
+ struct isci_host *ihost = data;
+
+ if (sci_controller_isr(ihost))
+ tasklet_schedule(&ihost->completion_tasklet);
+
+ return IRQ_HANDLED;
+}
+
+static bool sci_controller_error_isr(struct isci_host *ihost)
+{
+ u32 interrupt_status;
+
+ interrupt_status =
+ readl(&ihost->smu_registers->interrupt_status);
+ interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND);
+
+ if (interrupt_status != 0) {
+ /*
+ * There is an error interrupt pending so let it through and handle
+ * in the callback */
+ return true;
+ }
+
+ /*
+ * There is a race in the hardware that could cause us not to be notified
+ * of an interrupt completion if we do not take this step. We will mask
+ * then unmask the error interrupts so if there was another interrupt
+ * pending we will be notified.
+ * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */
+ writel(0xff, &ihost->smu_registers->interrupt_mask);
+ writel(0, &ihost->smu_registers->interrupt_mask);
+
+ return false;
+}
+
+static void sci_controller_task_completion(struct isci_host *ihost, u32 ent)
+{
+ u32 index = SCU_GET_COMPLETION_INDEX(ent);
+ struct isci_request *ireq = ihost->reqs[index];
+
+ /* Make sure that we really want to process this IO request */
+ if (test_bit(IREQ_ACTIVE, &ireq->flags) &&
+ ireq->io_tag != SCI_CONTROLLER_INVALID_IO_TAG &&
+ ISCI_TAG_SEQ(ireq->io_tag) == ihost->io_request_sequence[index])
+ /* Yep this is a valid io request pass it along to the
+ * io request handler
+ */
+ sci_io_request_tc_completion(ireq, ent);
+}
+
+static void sci_controller_sdma_completion(struct isci_host *ihost, u32 ent)
+{
+ u32 index;
+ struct isci_request *ireq;
+ struct isci_remote_device *idev;
+
+ index = SCU_GET_COMPLETION_INDEX(ent);
+
+ switch (scu_get_command_request_type(ent)) {
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC:
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC:
+ ireq = ihost->reqs[index];
+ dev_warn(&ihost->pdev->dev, "%s: %x for io request %p\n",
+ __func__, ent, ireq);
+ /* @todo For a post TC operation we need to fail the IO
+ * request
+ */
+ break;
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC:
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC:
+ case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC:
+ idev = ihost->device_table[index];
+ dev_warn(&ihost->pdev->dev, "%s: %x for device %p\n",
+ __func__, ent, idev);
+ /* @todo For a port RNC operation we need to fail the
+ * device
+ */
+ break;
+ default:
+ dev_warn(&ihost->pdev->dev, "%s: unknown completion type %x\n",
+ __func__, ent);
+ break;
+ }
+}
+
+static void sci_controller_unsolicited_frame(struct isci_host *ihost, u32 ent)
+{
+ u32 index;
+ u32 frame_index;
+
+ struct scu_unsolicited_frame_header *frame_header;
+ struct isci_phy *iphy;
+ struct isci_remote_device *idev;
+
+ enum sci_status result = SCI_FAILURE;
+
+ frame_index = SCU_GET_FRAME_INDEX(ent);
+
+ frame_header = ihost->uf_control.buffers.array[frame_index].header;
+ ihost->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE;
+
+ if (SCU_GET_FRAME_ERROR(ent)) {
+ /*
+ * / @todo If the IAF frame or SIGNATURE FIS frame has an error will
+ * / this cause a problem? We expect the phy initialization will
+ * / fail if there is an error in the frame. */
+ sci_controller_release_frame(ihost, frame_index);
+ return;
+ }
+
+ if (frame_header->is_address_frame) {
+ index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent);
+ iphy = &ihost->phys[index];
+ result = sci_phy_frame_handler(iphy, frame_index);
+ } else {
+
+ index = SCU_GET_COMPLETION_INDEX(ent);
+
+ if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) {
+ /*
+ * This is a signature fis or a frame from a direct attached SATA
+ * device that has not yet been created. In either case forwared
+ * the frame to the PE and let it take care of the frame data. */
+ index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent);
+ iphy = &ihost->phys[index];
+ result = sci_phy_frame_handler(iphy, frame_index);
+ } else {
+ if (index < ihost->remote_node_entries)
+ idev = ihost->device_table[index];
+ else
+ idev = NULL;
+
+ if (idev != NULL)
+ result = sci_remote_device_frame_handler(idev, frame_index);
+ else
+ sci_controller_release_frame(ihost, frame_index);
+ }
+ }
+
+ if (result != SCI_SUCCESS) {
+ /*
+ * / @todo Is there any reason to report some additional error message
+ * / when we get this failure notifiction? */
+ }
+}
+
+static void sci_controller_event_completion(struct isci_host *ihost, u32 ent)
+{
+ struct isci_remote_device *idev;
+ struct isci_request *ireq;
+ struct isci_phy *iphy;
+ u32 index;
+
+ index = SCU_GET_COMPLETION_INDEX(ent);
+
+ switch (scu_get_event_type(ent)) {
+ case SCU_EVENT_TYPE_SMU_COMMAND_ERROR:
+ /* / @todo The driver did something wrong and we need to fix the condtion. */
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC Controller 0x%p received SMU command error "
+ "0x%x\n",
+ __func__,
+ ihost,
+ ent);
+ break;
+
+ case SCU_EVENT_TYPE_SMU_PCQ_ERROR:
+ case SCU_EVENT_TYPE_SMU_ERROR:
+ case SCU_EVENT_TYPE_FATAL_MEMORY_ERROR:
+ /*
+ * / @todo This is a hardware failure and its likely that we want to
+ * / reset the controller. */
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC Controller 0x%p received fatal controller "
+ "event 0x%x\n",
+ __func__,
+ ihost,
+ ent);
+ break;
+
+ case SCU_EVENT_TYPE_TRANSPORT_ERROR:
+ ireq = ihost->reqs[index];
+ sci_io_request_event_handler(ireq, ent);
+ break;
+
+ case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT:
+ switch (scu_get_event_specifier(ent)) {
+ case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE:
+ case SCU_EVENT_SPECIFIC_TASK_TIMEOUT:
+ ireq = ihost->reqs[index];
+ if (ireq != NULL)
+ sci_io_request_event_handler(ireq, ent);
+ else
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC Controller 0x%p received "
+ "event 0x%x for io request object "
+ "that doesnt exist.\n",
+ __func__,
+ ihost,
+ ent);
+
+ break;
+
+ case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT:
+ idev = ihost->device_table[index];
+ if (idev != NULL)
+ sci_remote_device_event_handler(idev, ent);
+ else
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC Controller 0x%p received "
+ "event 0x%x for remote device object "
+ "that doesnt exist.\n",
+ __func__,
+ ihost,
+ ent);
+
+ break;
+ }
+ break;
+
+ case SCU_EVENT_TYPE_BROADCAST_CHANGE:
+ /*
+ * direct the broadcast change event to the phy first and then let
+ * the phy redirect the broadcast change to the port object */
+ case SCU_EVENT_TYPE_ERR_CNT_EVENT:
+ /*
+ * direct error counter event to the phy object since that is where
+ * we get the event notification. This is a type 4 event. */
+ case SCU_EVENT_TYPE_OSSP_EVENT:
+ index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent);
+ iphy = &ihost->phys[index];
+ sci_phy_event_handler(iphy, ent);
+ break;
+
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX:
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
+ case SCU_EVENT_TYPE_RNC_OPS_MISC:
+ if (index < ihost->remote_node_entries) {
+ idev = ihost->device_table[index];
+
+ if (idev != NULL)
+ sci_remote_device_event_handler(idev, ent);
+ } else
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC Controller 0x%p received event 0x%x "
+ "for remote device object 0x%0x that doesnt "
+ "exist.\n",
+ __func__,
+ ihost,
+ ent,
+ index);
+
+ break;
+
+ default:
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC Controller received unknown event code %x\n",
+ __func__,
+ ent);
+ break;
+ }
+}
+
+static void sci_controller_process_completions(struct isci_host *ihost)
+{
+ u32 completion_count = 0;
+ u32 ent;
+ u32 get_index;
+ u32 get_cycle;
+ u32 event_get;
+ u32 event_cycle;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: completion queue begining get:0x%08x\n",
+ __func__,
+ ihost->completion_queue_get);
+
+ /* Get the component parts of the completion queue */
+ get_index = NORMALIZE_GET_POINTER(ihost->completion_queue_get);
+ get_cycle = SMU_CQGR_CYCLE_BIT & ihost->completion_queue_get;
+
+ event_get = NORMALIZE_EVENT_POINTER(ihost->completion_queue_get);
+ event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & ihost->completion_queue_get;
+
+ while (
+ NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle)
+ == COMPLETION_QUEUE_CYCLE_BIT(ihost->completion_queue[get_index])
+ ) {
+ completion_count++;
+
+ ent = ihost->completion_queue[get_index];
+
+ /* increment the get pointer and check for rollover to toggle the cycle bit */
+ get_cycle ^= ((get_index+1) & SCU_MAX_COMPLETION_QUEUE_ENTRIES) <<
+ (SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT - SCU_MAX_COMPLETION_QUEUE_SHIFT);
+ get_index = (get_index+1) & (SCU_MAX_COMPLETION_QUEUE_ENTRIES-1);
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: completion queue entry:0x%08x\n",
+ __func__,
+ ent);
+
+ switch (SCU_GET_COMPLETION_TYPE(ent)) {
+ case SCU_COMPLETION_TYPE_TASK:
+ sci_controller_task_completion(ihost, ent);
+ break;
+
+ case SCU_COMPLETION_TYPE_SDMA:
+ sci_controller_sdma_completion(ihost, ent);
+ break;
+
+ case SCU_COMPLETION_TYPE_UFI:
+ sci_controller_unsolicited_frame(ihost, ent);
+ break;
+
+ case SCU_COMPLETION_TYPE_EVENT:
+ case SCU_COMPLETION_TYPE_NOTIFY: {
+ event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) <<
+ (SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT);
+ event_get = (event_get+1) & (SCU_MAX_EVENTS-1);
+
+ sci_controller_event_completion(ihost, ent);
+ break;
+ }
+ default:
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC Controller received unknown "
+ "completion type %x\n",
+ __func__,
+ ent);
+ break;
+ }
+ }
+
+ /* Update the get register if we completed one or more entries */
+ if (completion_count > 0) {
+ ihost->completion_queue_get =
+ SMU_CQGR_GEN_BIT(ENABLE) |
+ SMU_CQGR_GEN_BIT(EVENT_ENABLE) |
+ event_cycle |
+ SMU_CQGR_GEN_VAL(EVENT_POINTER, event_get) |
+ get_cycle |
+ SMU_CQGR_GEN_VAL(POINTER, get_index);
+
+ writel(ihost->completion_queue_get,
+ &ihost->smu_registers->completion_queue_get);
+
+ }
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: completion queue ending get:0x%08x\n",
+ __func__,
+ ihost->completion_queue_get);
+
+}
+
+static void sci_controller_error_handler(struct isci_host *ihost)
+{
+ u32 interrupt_status;
+
+ interrupt_status =
+ readl(&ihost->smu_registers->interrupt_status);
+
+ if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) &&
+ sci_controller_completion_queue_has_entries(ihost)) {
+
+ sci_controller_process_completions(ihost);
+ writel(SMU_ISR_QUEUE_SUSPEND, &ihost->smu_registers->interrupt_status);
+ } else {
+ dev_err(&ihost->pdev->dev, "%s: status: %#x\n", __func__,
+ interrupt_status);
+
+ sci_change_state(&ihost->sm, SCIC_FAILED);
+
+ return;
+ }
+
+ /* If we dont process any completions I am not sure that we want to do this.
+ * We are in the middle of a hardware fault and should probably be reset.
+ */
+ writel(0, &ihost->smu_registers->interrupt_mask);
+}
+
+irqreturn_t isci_intx_isr(int vec, void *data)
+{
+ irqreturn_t ret = IRQ_NONE;
+ struct isci_host *ihost = data;
+
+ if (sci_controller_isr(ihost)) {
+ writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status);
+ tasklet_schedule(&ihost->completion_tasklet);
+ ret = IRQ_HANDLED;
+ } else if (sci_controller_error_isr(ihost)) {
+ spin_lock(&ihost->scic_lock);
+ sci_controller_error_handler(ihost);
+ spin_unlock(&ihost->scic_lock);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+irqreturn_t isci_error_isr(int vec, void *data)
+{
+ struct isci_host *ihost = data;
+
+ if (sci_controller_error_isr(ihost))
+ sci_controller_error_handler(ihost);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * isci_host_start_complete() - This function is called by the core library,
+ * through the ISCI Module, to indicate controller start status.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @completion_status: This parameter specifies the completion status from the
+ * core library.
+ *
+ */
+static void isci_host_start_complete(struct isci_host *ihost, enum sci_status completion_status)
+{
+ if (completion_status != SCI_SUCCESS)
+ dev_info(&ihost->pdev->dev,
+ "controller start timed out, continuing...\n");
+ isci_host_change_state(ihost, isci_ready);
+ clear_bit(IHOST_START_PENDING, &ihost->flags);
+ wake_up(&ihost->eventq);
+}
+
+int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+ struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha;
+
+ if (test_bit(IHOST_START_PENDING, &ihost->flags))
+ return 0;
+
+ /* todo: use sas_flush_discovery once it is upstream */
+ scsi_flush_work(shost);
+
+ scsi_flush_work(shost);
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: ihost->status = %d, time = %ld\n",
+ __func__, isci_host_get_state(ihost), time);
+
+ return 1;
+
+}
+
+/**
+ * sci_controller_get_suggested_start_timeout() - This method returns the
+ * suggested sci_controller_start() timeout amount. The user is free to
+ * use any timeout value, but this method provides the suggested minimum
+ * start timeout value. The returned value is based upon empirical
+ * information determined as a result of interoperability testing.
+ * @controller: the handle to the controller object for which to return the
+ * suggested start timeout.
+ *
+ * This method returns the number of milliseconds for the suggested start
+ * operation timeout.
+ */
+static u32 sci_controller_get_suggested_start_timeout(struct isci_host *ihost)
+{
+ /* Validate the user supplied parameters. */
+ if (!ihost)
+ return 0;
+
+ /*
+ * The suggested minimum timeout value for a controller start operation:
+ *
+ * Signature FIS Timeout
+ * + Phy Start Timeout
+ * + Number of Phy Spin Up Intervals
+ * ---------------------------------
+ * Number of milliseconds for the controller start operation.
+ *
+ * NOTE: The number of phy spin up intervals will be equivalent
+ * to the number of phys divided by the number phys allowed
+ * per interval - 1 (once OEM parameters are supported).
+ * Currently we assume only 1 phy per interval. */
+
+ return SCIC_SDS_SIGNATURE_FIS_TIMEOUT
+ + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT
+ + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
+}
+
+static void sci_controller_enable_interrupts(struct isci_host *ihost)
+{
+ BUG_ON(ihost->smu_registers == NULL);
+ writel(0, &ihost->smu_registers->interrupt_mask);
+}
+
+void sci_controller_disable_interrupts(struct isci_host *ihost)
+{
+ BUG_ON(ihost->smu_registers == NULL);
+ writel(0xffffffff, &ihost->smu_registers->interrupt_mask);
+}
+
+static void sci_controller_enable_port_task_scheduler(struct isci_host *ihost)
+{
+ u32 port_task_scheduler_value;
+
+ port_task_scheduler_value =
+ readl(&ihost->scu_registers->peg0.ptsg.control);
+ port_task_scheduler_value |=
+ (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) |
+ SCU_PTSGCR_GEN_BIT(PTSG_ENABLE));
+ writel(port_task_scheduler_value,
+ &ihost->scu_registers->peg0.ptsg.control);
+}
+
+static void sci_controller_assign_task_entries(struct isci_host *ihost)
+{
+ u32 task_assignment;
+
+ /*
+ * Assign all the TCs to function 0
+ * TODO: Do we actually need to read this register to write it back?
+ */
+
+ task_assignment =
+ readl(&ihost->smu_registers->task_context_assignment[0]);
+
+ task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) |
+ (SMU_TCA_GEN_VAL(ENDING, ihost->task_context_entries - 1)) |
+ (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE));
+
+ writel(task_assignment,
+ &ihost->smu_registers->task_context_assignment[0]);
+
+}
+
+static void sci_controller_initialize_completion_queue(struct isci_host *ihost)
+{
+ u32 index;
+ u32 completion_queue_control_value;
+ u32 completion_queue_get_value;
+ u32 completion_queue_put_value;
+
+ ihost->completion_queue_get = 0;
+
+ completion_queue_control_value =
+ (SMU_CQC_QUEUE_LIMIT_SET(SCU_MAX_COMPLETION_QUEUE_ENTRIES - 1) |
+ SMU_CQC_EVENT_LIMIT_SET(SCU_MAX_EVENTS - 1));
+
+ writel(completion_queue_control_value,
+ &ihost->smu_registers->completion_queue_control);
+
+
+ /* Set the completion queue get pointer and enable the queue */
+ completion_queue_get_value = (
+ (SMU_CQGR_GEN_VAL(POINTER, 0))
+ | (SMU_CQGR_GEN_VAL(EVENT_POINTER, 0))
+ | (SMU_CQGR_GEN_BIT(ENABLE))
+ | (SMU_CQGR_GEN_BIT(EVENT_ENABLE))
+ );
+
+ writel(completion_queue_get_value,
+ &ihost->smu_registers->completion_queue_get);
+
+ /* Set the completion queue put pointer */
+ completion_queue_put_value = (
+ (SMU_CQPR_GEN_VAL(POINTER, 0))
+ | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0))
+ );
+
+ writel(completion_queue_put_value,
+ &ihost->smu_registers->completion_queue_put);
+
+ /* Initialize the cycle bit of the completion queue entries */
+ for (index = 0; index < SCU_MAX_COMPLETION_QUEUE_ENTRIES; index++) {
+ /*
+ * If get.cycle_bit != completion_queue.cycle_bit
+ * its not a valid completion queue entry
+ * so at system start all entries are invalid */
+ ihost->completion_queue[index] = 0x80000000;
+ }
+}
+
+static void sci_controller_initialize_unsolicited_frame_queue(struct isci_host *ihost)
+{
+ u32 frame_queue_control_value;
+ u32 frame_queue_get_value;
+ u32 frame_queue_put_value;
+
+ /* Write the queue size */
+ frame_queue_control_value =
+ SCU_UFQC_GEN_VAL(QUEUE_SIZE, SCU_MAX_UNSOLICITED_FRAMES);
+
+ writel(frame_queue_control_value,
+ &ihost->scu_registers->sdma.unsolicited_frame_queue_control);
+
+ /* Setup the get pointer for the unsolicited frame queue */
+ frame_queue_get_value = (
+ SCU_UFQGP_GEN_VAL(POINTER, 0)
+ | SCU_UFQGP_GEN_BIT(ENABLE_BIT)
+ );
+
+ writel(frame_queue_get_value,
+ &ihost->scu_registers->sdma.unsolicited_frame_get_pointer);
+ /* Setup the put pointer for the unsolicited frame queue */
+ frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0);
+ writel(frame_queue_put_value,
+ &ihost->scu_registers->sdma.unsolicited_frame_put_pointer);
+}
+
+static void sci_controller_transition_to_ready(struct isci_host *ihost, enum sci_status status)
+{
+ if (ihost->sm.current_state_id == SCIC_STARTING) {
+ /*
+ * We move into the ready state, because some of the phys/ports
+ * may be up and operational.
+ */
+ sci_change_state(&ihost->sm, SCIC_READY);
+
+ isci_host_start_complete(ihost, status);
+ }
+}
+
+static bool is_phy_starting(struct isci_phy *iphy)
+{
+ enum sci_phy_states state;
+
+ state = iphy->sm.current_state_id;
+ switch (state) {
+ case SCI_PHY_STARTING:
+ case SCI_PHY_SUB_INITIAL:
+ case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN:
+ case SCI_PHY_SUB_AWAIT_IAF_UF:
+ case SCI_PHY_SUB_AWAIT_SAS_POWER:
+ case SCI_PHY_SUB_AWAIT_SATA_POWER:
+ case SCI_PHY_SUB_AWAIT_SATA_PHY_EN:
+ case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
+ case SCI_PHY_SUB_AWAIT_SIG_FIS_UF:
+ case SCI_PHY_SUB_FINAL:
+ return true;
+ default:
+ return false;
+ }
+}
+
+/**
+ * sci_controller_start_next_phy - start phy
+ * @scic: controller
+ *
+ * If all the phys have been started, then attempt to transition the
+ * controller to the READY state and inform the user
+ * (sci_cb_controller_start_complete()).
+ */
+static enum sci_status sci_controller_start_next_phy(struct isci_host *ihost)
+{
+ struct sci_oem_params *oem = &ihost->oem_parameters;
+ struct isci_phy *iphy;
+ enum sci_status status;
+
+ status = SCI_SUCCESS;
+
+ if (ihost->phy_startup_timer_pending)
+ return status;
+
+ if (ihost->next_phy_to_start >= SCI_MAX_PHYS) {
+ bool is_controller_start_complete = true;
+ u32 state;
+ u8 index;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ iphy = &ihost->phys[index];
+ state = iphy->sm.current_state_id;
+
+ if (!phy_get_non_dummy_port(iphy))
+ continue;
+
+ /* The controller start operation is complete iff:
+ * - all links have been given an opportunity to start
+ * - have no indication of a connected device
+ * - have an indication of a connected device and it has
+ * finished the link training process.
+ */
+ if ((iphy->is_in_link_training == false && state == SCI_PHY_INITIAL) ||
+ (iphy->is_in_link_training == false && state == SCI_PHY_STOPPED) ||
+ (iphy->is_in_link_training == true && is_phy_starting(iphy))) {
+ is_controller_start_complete = false;
+ break;
+ }
+ }
+
+ /*
+ * The controller has successfully finished the start process.
+ * Inform the SCI Core user and transition to the READY state. */
+ if (is_controller_start_complete == true) {
+ sci_controller_transition_to_ready(ihost, SCI_SUCCESS);
+ sci_del_timer(&ihost->phy_timer);
+ ihost->phy_startup_timer_pending = false;
+ }
+ } else {
+ iphy = &ihost->phys[ihost->next_phy_to_start];
+
+ if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
+ if (phy_get_non_dummy_port(iphy) == NULL) {
+ ihost->next_phy_to_start++;
+
+ /* Caution recursion ahead be forwarned
+ *
+ * The PHY was never added to a PORT in MPC mode
+ * so start the next phy in sequence This phy
+ * will never go link up and will not draw power
+ * the OEM parameters either configured the phy
+ * incorrectly for the PORT or it was never
+ * assigned to a PORT
+ */
+ return sci_controller_start_next_phy(ihost);
+ }
+ }
+
+ status = sci_phy_start(iphy);
+
+ if (status == SCI_SUCCESS) {
+ sci_mod_timer(&ihost->phy_timer,
+ SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT);
+ ihost->phy_startup_timer_pending = true;
+ } else {
+ dev_warn(&ihost->pdev->dev,
+ "%s: Controller stop operation failed "
+ "to stop phy %d because of status "
+ "%d.\n",
+ __func__,
+ ihost->phys[ihost->next_phy_to_start].phy_index,
+ status);
+ }
+
+ ihost->next_phy_to_start++;
+ }
+
+ return status;
+}
+
+static void phy_startup_timeout(unsigned long data)
+{
+ struct sci_timer *tmr = (struct sci_timer *)data;
+ struct isci_host *ihost = container_of(tmr, typeof(*ihost), phy_timer);
+ unsigned long flags;
+ enum sci_status status;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (tmr->cancel)
+ goto done;
+
+ ihost->phy_startup_timer_pending = false;
+
+ do {
+ status = sci_controller_start_next_phy(ihost);
+ } while (status != SCI_SUCCESS);
+
+done:
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
+
+static u16 isci_tci_active(struct isci_host *ihost)
+{
+ return CIRC_CNT(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS);
+}
+
+static enum sci_status sci_controller_start(struct isci_host *ihost,
+ u32 timeout)
+{
+ enum sci_status result;
+ u16 index;
+
+ if (ihost->sm.current_state_id != SCIC_INITIALIZED) {
+ dev_warn(&ihost->pdev->dev,
+ "SCIC Controller start operation requested in "
+ "invalid state\n");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ /* Build the TCi free pool */
+ BUILD_BUG_ON(SCI_MAX_IO_REQUESTS > 1 << sizeof(ihost->tci_pool[0]) * 8);
+ ihost->tci_head = 0;
+ ihost->tci_tail = 0;
+ for (index = 0; index < ihost->task_context_entries; index++)
+ isci_tci_free(ihost, index);
+
+ /* Build the RNi free pool */
+ sci_remote_node_table_initialize(&ihost->available_remote_nodes,
+ ihost->remote_node_entries);
+
+ /*
+ * Before anything else lets make sure we will not be
+ * interrupted by the hardware.
+ */
+ sci_controller_disable_interrupts(ihost);
+
+ /* Enable the port task scheduler */
+ sci_controller_enable_port_task_scheduler(ihost);
+
+ /* Assign all the task entries to ihost physical function */
+ sci_controller_assign_task_entries(ihost);
+
+ /* Now initialize the completion queue */
+ sci_controller_initialize_completion_queue(ihost);
+
+ /* Initialize the unsolicited frame queue for use */
+ sci_controller_initialize_unsolicited_frame_queue(ihost);
+
+ /* Start all of the ports on this controller */
+ for (index = 0; index < ihost->logical_port_entries; index++) {
+ struct isci_port *iport = &ihost->ports[index];
+
+ result = sci_port_start(iport);
+ if (result)
+ return result;
+ }
+
+ sci_controller_start_next_phy(ihost);
+
+ sci_mod_timer(&ihost->timer, timeout);
+
+ sci_change_state(&ihost->sm, SCIC_STARTING);
+
+ return SCI_SUCCESS;
+}
+
+void isci_host_scan_start(struct Scsi_Host *shost)
+{
+ struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha;
+ unsigned long tmo = sci_controller_get_suggested_start_timeout(ihost);
+
+ set_bit(IHOST_START_PENDING, &ihost->flags);
+
+ spin_lock_irq(&ihost->scic_lock);
+ sci_controller_start(ihost, tmo);
+ sci_controller_enable_interrupts(ihost);
+ spin_unlock_irq(&ihost->scic_lock);
+}
+
+static void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status)
+{
+ isci_host_change_state(ihost, isci_stopped);
+ sci_controller_disable_interrupts(ihost);
+ clear_bit(IHOST_STOP_PENDING, &ihost->flags);
+ wake_up(&ihost->eventq);
+}
+
+static void sci_controller_completion_handler(struct isci_host *ihost)
+{
+ /* Empty out the completion queue */
+ if (sci_controller_completion_queue_has_entries(ihost))
+ sci_controller_process_completions(ihost);
+
+ /* Clear the interrupt and enable all interrupts again */
+ writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status);
+ /* Could we write the value of SMU_ISR_COMPLETION? */
+ writel(0xFF000000, &ihost->smu_registers->interrupt_mask);
+ writel(0, &ihost->smu_registers->interrupt_mask);
+}
+
+/**
+ * isci_host_completion_routine() - This function is the delayed service
+ * routine that calls the sci core library's completion handler. It's
+ * scheduled as a tasklet from the interrupt service routine when interrupts
+ * in use, or set as the timeout function in polled mode.
+ * @data: This parameter specifies the ISCI host object
+ *
+ */
+static void isci_host_completion_routine(unsigned long data)
+{
+ struct isci_host *ihost = (struct isci_host *)data;
+ struct list_head completed_request_list;
+ struct list_head errored_request_list;
+ struct list_head *current_position;
+ struct list_head *next_position;
+ struct isci_request *request;
+ struct isci_request *next_request;
+ struct sas_task *task;
+
+ INIT_LIST_HEAD(&completed_request_list);
+ INIT_LIST_HEAD(&errored_request_list);
+
+ spin_lock_irq(&ihost->scic_lock);
+
+ sci_controller_completion_handler(ihost);
+
+ /* Take the lists of completed I/Os from the host. */
+
+ list_splice_init(&ihost->requests_to_complete,
+ &completed_request_list);
+
+ /* Take the list of errored I/Os from the host. */
+ list_splice_init(&ihost->requests_to_errorback,
+ &errored_request_list);
+
+ spin_unlock_irq(&ihost->scic_lock);
+
+ /* Process any completions in the lists. */
+ list_for_each_safe(current_position, next_position,
+ &completed_request_list) {
+
+ request = list_entry(current_position, struct isci_request,
+ completed_node);
+ task = isci_request_access_task(request);
+
+ /* Normal notification (task_done) */
+ dev_dbg(&ihost->pdev->dev,
+ "%s: Normal - request/task = %p/%p\n",
+ __func__,
+ request,
+ task);
+
+ /* Return the task to libsas */
+ if (task != NULL) {
+
+ task->lldd_task = NULL;
+ if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+
+ /* If the task is already in the abort path,
+ * the task_done callback cannot be called.
+ */
+ task->task_done(task);
+ }
+ }
+
+ spin_lock_irq(&ihost->scic_lock);
+ isci_free_tag(ihost, request->io_tag);
+ spin_unlock_irq(&ihost->scic_lock);
+ }
+ list_for_each_entry_safe(request, next_request, &errored_request_list,
+ completed_node) {
+
+ task = isci_request_access_task(request);
+
+ /* Use sas_task_abort */
+ dev_warn(&ihost->pdev->dev,
+ "%s: Error - request/task = %p/%p\n",
+ __func__,
+ request,
+ task);
+
+ if (task != NULL) {
+
+ /* Put the task into the abort path if it's not there
+ * already.
+ */
+ if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED))
+ sas_task_abort(task);
+
+ } else {
+ /* This is a case where the request has completed with a
+ * status such that it needed further target servicing,
+ * but the sas_task reference has already been removed
+ * from the request. Since it was errored, it was not
+ * being aborted, so there is nothing to do except free
+ * it.
+ */
+
+ spin_lock_irq(&ihost->scic_lock);
+ /* Remove the request from the remote device's list
+ * of pending requests.
+ */
+ list_del_init(&request->dev_node);
+ isci_free_tag(ihost, request->io_tag);
+ spin_unlock_irq(&ihost->scic_lock);
+ }
+ }
+
+}
+
+/**
+ * sci_controller_stop() - This method will stop an individual controller
+ * object.This method will invoke the associated user callback upon
+ * completion. The completion callback is called when the following
+ * conditions are met: -# the method return status is SCI_SUCCESS. -# the
+ * controller has been quiesced. This method will ensure that all IO
+ * requests are quiesced, phys are stopped, and all additional operation by
+ * the hardware is halted.
+ * @controller: the handle to the controller object to stop.
+ * @timeout: This parameter specifies the number of milliseconds in which the
+ * stop operation should complete.
+ *
+ * The controller must be in the STARTED or STOPPED state. Indicate if the
+ * controller stop method succeeded or failed in some way. SCI_SUCCESS if the
+ * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the
+ * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the
+ * controller is not either in the STARTED or STOPPED states.
+ */
+static enum sci_status sci_controller_stop(struct isci_host *ihost, u32 timeout)
+{
+ if (ihost->sm.current_state_id != SCIC_READY) {
+ dev_warn(&ihost->pdev->dev,
+ "SCIC Controller stop operation requested in "
+ "invalid state\n");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ sci_mod_timer(&ihost->timer, timeout);
+ sci_change_state(&ihost->sm, SCIC_STOPPING);
+ return SCI_SUCCESS;
+}
+
+/**
+ * sci_controller_reset() - This method will reset the supplied core
+ * controller regardless of the state of said controller. This operation is
+ * considered destructive. In other words, all current operations are wiped
+ * out. No IO completions for outstanding devices occur. Outstanding IO
+ * requests are not aborted or completed at the actual remote device.
+ * @controller: the handle to the controller object to reset.
+ *
+ * Indicate if the controller reset method succeeded or failed in some way.
+ * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if
+ * the controller reset operation is unable to complete.
+ */
+static enum sci_status sci_controller_reset(struct isci_host *ihost)
+{
+ switch (ihost->sm.current_state_id) {
+ case SCIC_RESET:
+ case SCIC_READY:
+ case SCIC_STOPPED:
+ case SCIC_FAILED:
+ /*
+ * The reset operation is not a graceful cleanup, just
+ * perform the state transition.
+ */
+ sci_change_state(&ihost->sm, SCIC_RESETTING);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(&ihost->pdev->dev,
+ "SCIC Controller reset operation requested in "
+ "invalid state\n");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+void isci_host_deinit(struct isci_host *ihost)
+{
+ int i;
+
+ isci_host_change_state(ihost, isci_stopping);
+ for (i = 0; i < SCI_MAX_PORTS; i++) {
+ struct isci_port *iport = &ihost->ports[i];
+ struct isci_remote_device *idev, *d;
+
+ list_for_each_entry_safe(idev, d, &iport->remote_dev_list, node) {
+ if (test_bit(IDEV_ALLOCATED, &idev->flags))
+ isci_remote_device_stop(ihost, idev);
+ }
+ }
+
+ set_bit(IHOST_STOP_PENDING, &ihost->flags);
+
+ spin_lock_irq(&ihost->scic_lock);
+ sci_controller_stop(ihost, SCIC_CONTROLLER_STOP_TIMEOUT);
+ spin_unlock_irq(&ihost->scic_lock);
+
+ wait_for_stop(ihost);
+ sci_controller_reset(ihost);
+
+ /* Cancel any/all outstanding port timers */
+ for (i = 0; i < ihost->logical_port_entries; i++) {
+ struct isci_port *iport = &ihost->ports[i];
+ del_timer_sync(&iport->timer.timer);
+ }
+
+ /* Cancel any/all outstanding phy timers */
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ struct isci_phy *iphy = &ihost->phys[i];
+ del_timer_sync(&iphy->sata_timer.timer);
+ }
+
+ del_timer_sync(&ihost->port_agent.timer.timer);
+
+ del_timer_sync(&ihost->power_control.timer.timer);
+
+ del_timer_sync(&ihost->timer.timer);
+
+ del_timer_sync(&ihost->phy_timer.timer);
+}
+
+static void __iomem *scu_base(struct isci_host *isci_host)
+{
+ struct pci_dev *pdev = isci_host->pdev;
+ int id = isci_host->id;
+
+ return pcim_iomap_table(pdev)[SCI_SCU_BAR * 2] + SCI_SCU_BAR_SIZE * id;
+}
+
+static void __iomem *smu_base(struct isci_host *isci_host)
+{
+ struct pci_dev *pdev = isci_host->pdev;
+ int id = isci_host->id;
+
+ return pcim_iomap_table(pdev)[SCI_SMU_BAR * 2] + SCI_SMU_BAR_SIZE * id;
+}
+
+static void isci_user_parameters_get(struct sci_user_parameters *u)
+{
+ int i;
+
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ struct sci_phy_user_params *u_phy = &u->phys[i];
+
+ u_phy->max_speed_generation = phy_gen;
+
+ /* we are not exporting these for now */
+ u_phy->align_insertion_frequency = 0x7f;
+ u_phy->in_connection_align_insertion_frequency = 0xff;
+ u_phy->notify_enable_spin_up_insertion_frequency = 0x33;
+ }
+
+ u->stp_inactivity_timeout = stp_inactive_to;
+ u->ssp_inactivity_timeout = ssp_inactive_to;
+ u->stp_max_occupancy_timeout = stp_max_occ_to;
+ u->ssp_max_occupancy_timeout = ssp_max_occ_to;
+ u->no_outbound_task_timeout = no_outbound_task_to;
+ u->max_number_concurrent_device_spin_up = max_concurr_spinup;
+}
+
+static void sci_controller_initial_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ sci_change_state(&ihost->sm, SCIC_RESET);
+}
+
+static inline void sci_controller_starting_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ sci_del_timer(&ihost->timer);
+}
+
+#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853
+#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280
+#define INTERRUPT_COALESCE_TIMEOUT_MAX_US 2700000
+#define INTERRUPT_COALESCE_NUMBER_MAX 256
+#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN 7
+#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28
+
+/**
+ * sci_controller_set_interrupt_coalescence() - This method allows the user to
+ * configure the interrupt coalescence.
+ * @controller: This parameter represents the handle to the controller object
+ * for which its interrupt coalesce register is overridden.
+ * @coalesce_number: Used to control the number of entries in the Completion
+ * Queue before an interrupt is generated. If the number of entries exceed
+ * this number, an interrupt will be generated. The valid range of the input
+ * is [0, 256]. A setting of 0 results in coalescing being disabled.
+ * @coalesce_timeout: Timeout value in microseconds. The valid range of the
+ * input is [0, 2700000] . A setting of 0 is allowed and results in no
+ * interrupt coalescing timeout.
+ *
+ * Indicate if the user successfully set the interrupt coalesce parameters.
+ * SCI_SUCCESS The user successfully updated the interrutp coalescence.
+ * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range.
+ */
+static enum sci_status
+sci_controller_set_interrupt_coalescence(struct isci_host *ihost,
+ u32 coalesce_number,
+ u32 coalesce_timeout)
+{
+ u8 timeout_encode = 0;
+ u32 min = 0;
+ u32 max = 0;
+
+ /* Check if the input parameters fall in the range. */
+ if (coalesce_number > INTERRUPT_COALESCE_NUMBER_MAX)
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+ /*
+ * Defined encoding for interrupt coalescing timeout:
+ * Value Min Max Units
+ * ----- --- --- -----
+ * 0 - - Disabled
+ * 1 13.3 20.0 ns
+ * 2 26.7 40.0
+ * 3 53.3 80.0
+ * 4 106.7 160.0
+ * 5 213.3 320.0
+ * 6 426.7 640.0
+ * 7 853.3 1280.0
+ * 8 1.7 2.6 us
+ * 9 3.4 5.1
+ * 10 6.8 10.2
+ * 11 13.7 20.5
+ * 12 27.3 41.0
+ * 13 54.6 81.9
+ * 14 109.2 163.8
+ * 15 218.5 327.7
+ * 16 436.9 655.4
+ * 17 873.8 1310.7
+ * 18 1.7 2.6 ms
+ * 19 3.5 5.2
+ * 20 7.0 10.5
+ * 21 14.0 21.0
+ * 22 28.0 41.9
+ * 23 55.9 83.9
+ * 24 111.8 167.8
+ * 25 223.7 335.5
+ * 26 447.4 671.1
+ * 27 894.8 1342.2
+ * 28 1.8 2.7 s
+ * Others Undefined */
+
+ /*
+ * Use the table above to decide the encode of interrupt coalescing timeout
+ * value for register writing. */
+ if (coalesce_timeout == 0)
+ timeout_encode = 0;
+ else{
+ /* make the timeout value in unit of (10 ns). */
+ coalesce_timeout = coalesce_timeout * 100;
+ min = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS / 10;
+ max = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS / 10;
+
+ /* get the encode of timeout for register writing. */
+ for (timeout_encode = INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN;
+ timeout_encode <= INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX;
+ timeout_encode++) {
+ if (min <= coalesce_timeout && max > coalesce_timeout)
+ break;
+ else if (coalesce_timeout >= max && coalesce_timeout < min * 2
+ && coalesce_timeout <= INTERRUPT_COALESCE_TIMEOUT_MAX_US * 100) {
+ if ((coalesce_timeout - max) < (2 * min - coalesce_timeout))
+ break;
+ else{
+ timeout_encode++;
+ break;
+ }
+ } else {
+ max = max * 2;
+ min = min * 2;
+ }
+ }
+
+ if (timeout_encode == INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX + 1)
+ /* the value is out of range. */
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+ }
+
+ writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) |
+ SMU_ICC_GEN_VAL(TIMER, timeout_encode),
+ &ihost->smu_registers->interrupt_coalesce_control);
+
+
+ ihost->interrupt_coalesce_number = (u16)coalesce_number;
+ ihost->interrupt_coalesce_timeout = coalesce_timeout / 100;
+
+ return SCI_SUCCESS;
+}
+
+
+static void sci_controller_ready_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ /* set the default interrupt coalescence number and timeout value. */
+ sci_controller_set_interrupt_coalescence(ihost, 0x10, 250);
+}
+
+static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ /* disable interrupt coalescence. */
+ sci_controller_set_interrupt_coalescence(ihost, 0, 0);
+}
+
+static enum sci_status sci_controller_stop_phys(struct isci_host *ihost)
+{
+ u32 index;
+ enum sci_status status;
+ enum sci_status phy_status;
+
+ status = SCI_SUCCESS;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ phy_status = sci_phy_stop(&ihost->phys[index]);
+
+ if (phy_status != SCI_SUCCESS &&
+ phy_status != SCI_FAILURE_INVALID_STATE) {
+ status = SCI_FAILURE;
+
+ dev_warn(&ihost->pdev->dev,
+ "%s: Controller stop operation failed to stop "
+ "phy %d because of status %d.\n",
+ __func__,
+ ihost->phys[index].phy_index, phy_status);
+ }
+ }
+
+ return status;
+}
+
+static enum sci_status sci_controller_stop_ports(struct isci_host *ihost)
+{
+ u32 index;
+ enum sci_status port_status;
+ enum sci_status status = SCI_SUCCESS;
+
+ for (index = 0; index < ihost->logical_port_entries; index++) {
+ struct isci_port *iport = &ihost->ports[index];
+
+ port_status = sci_port_stop(iport);
+
+ if ((port_status != SCI_SUCCESS) &&
+ (port_status != SCI_FAILURE_INVALID_STATE)) {
+ status = SCI_FAILURE;
+
+ dev_warn(&ihost->pdev->dev,
+ "%s: Controller stop operation failed to "
+ "stop port %d because of status %d.\n",
+ __func__,
+ iport->logical_port_index,
+ port_status);
+ }
+ }
+
+ return status;
+}
+
+static enum sci_status sci_controller_stop_devices(struct isci_host *ihost)
+{
+ u32 index;
+ enum sci_status status;
+ enum sci_status device_status;
+
+ status = SCI_SUCCESS;
+
+ for (index = 0; index < ihost->remote_node_entries; index++) {
+ if (ihost->device_table[index] != NULL) {
+ /* / @todo What timeout value do we want to provide to this request? */
+ device_status = sci_remote_device_stop(ihost->device_table[index], 0);
+
+ if ((device_status != SCI_SUCCESS) &&
+ (device_status != SCI_FAILURE_INVALID_STATE)) {
+ dev_warn(&ihost->pdev->dev,
+ "%s: Controller stop operation failed "
+ "to stop device 0x%p because of "
+ "status %d.\n",
+ __func__,
+ ihost->device_table[index], device_status);
+ }
+ }
+ }
+
+ return status;
+}
+
+static void sci_controller_stopping_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ /* Stop all of the components for this controller */
+ sci_controller_stop_phys(ihost);
+ sci_controller_stop_ports(ihost);
+ sci_controller_stop_devices(ihost);
+}
+
+static void sci_controller_stopping_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ sci_del_timer(&ihost->timer);
+}
+
+static void sci_controller_reset_hardware(struct isci_host *ihost)
+{
+ /* Disable interrupts so we dont take any spurious interrupts */
+ sci_controller_disable_interrupts(ihost);
+
+ /* Reset the SCU */
+ writel(0xFFFFFFFF, &ihost->smu_registers->soft_reset_control);
+
+ /* Delay for 1ms to before clearing the CQP and UFQPR. */
+ udelay(1000);
+
+ /* The write to the CQGR clears the CQP */
+ writel(0x00000000, &ihost->smu_registers->completion_queue_get);
+
+ /* The write to the UFQGP clears the UFQPR */
+ writel(0, &ihost->scu_registers->sdma.unsolicited_frame_get_pointer);
+}
+
+static void sci_controller_resetting_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
+
+ sci_controller_reset_hardware(ihost);
+ sci_change_state(&ihost->sm, SCIC_RESET);
+}
+
+static const struct sci_base_state sci_controller_state_table[] = {
+ [SCIC_INITIAL] = {
+ .enter_state = sci_controller_initial_state_enter,
+ },
+ [SCIC_RESET] = {},
+ [SCIC_INITIALIZING] = {},
+ [SCIC_INITIALIZED] = {},
+ [SCIC_STARTING] = {
+ .exit_state = sci_controller_starting_state_exit,
+ },
+ [SCIC_READY] = {
+ .enter_state = sci_controller_ready_state_enter,
+ .exit_state = sci_controller_ready_state_exit,
+ },
+ [SCIC_RESETTING] = {
+ .enter_state = sci_controller_resetting_state_enter,
+ },
+ [SCIC_STOPPING] = {
+ .enter_state = sci_controller_stopping_state_enter,
+ .exit_state = sci_controller_stopping_state_exit,
+ },
+ [SCIC_STOPPED] = {},
+ [SCIC_FAILED] = {}
+};
+
+static void sci_controller_set_default_config_parameters(struct isci_host *ihost)
+{
+ /* these defaults are overridden by the platform / firmware */
+ u16 index;
+
+ /* Default to APC mode. */
+ ihost->oem_parameters.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
+
+ /* Default to APC mode. */
+ ihost->oem_parameters.controller.max_concurrent_dev_spin_up = 1;
+
+ /* Default to no SSC operation. */
+ ihost->oem_parameters.controller.do_enable_ssc = false;
+
+ /* Initialize all of the port parameter information to narrow ports. */
+ for (index = 0; index < SCI_MAX_PORTS; index++) {
+ ihost->oem_parameters.ports[index].phy_mask = 0;
+ }
+
+ /* Initialize all of the phy parameter information. */
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ /* Default to 6G (i.e. Gen 3) for now. */
+ ihost->user_parameters.phys[index].max_speed_generation = 3;
+
+ /* the frequencies cannot be 0 */
+ ihost->user_parameters.phys[index].align_insertion_frequency = 0x7f;
+ ihost->user_parameters.phys[index].in_connection_align_insertion_frequency = 0xff;
+ ihost->user_parameters.phys[index].notify_enable_spin_up_insertion_frequency = 0x33;
+
+ /*
+ * Previous Vitesse based expanders had a arbitration issue that
+ * is worked around by having the upper 32-bits of SAS address
+ * with a value greater then the Vitesse company identifier.
+ * Hence, usage of 0x5FCFFFFF. */
+ ihost->oem_parameters.phys[index].sas_address.low = 0x1 + ihost->id;
+ ihost->oem_parameters.phys[index].sas_address.high = 0x5FCFFFFF;
+ }
+
+ ihost->user_parameters.stp_inactivity_timeout = 5;
+ ihost->user_parameters.ssp_inactivity_timeout = 5;
+ ihost->user_parameters.stp_max_occupancy_timeout = 5;
+ ihost->user_parameters.ssp_max_occupancy_timeout = 20;
+ ihost->user_parameters.no_outbound_task_timeout = 20;
+}
+
+static void controller_timeout(unsigned long data)
+{
+ struct sci_timer *tmr = (struct sci_timer *)data;
+ struct isci_host *ihost = container_of(tmr, typeof(*ihost), timer);
+ struct sci_base_state_machine *sm = &ihost->sm;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (tmr->cancel)
+ goto done;
+
+ if (sm->current_state_id == SCIC_STARTING)
+ sci_controller_transition_to_ready(ihost, SCI_FAILURE_TIMEOUT);
+ else if (sm->current_state_id == SCIC_STOPPING) {
+ sci_change_state(sm, SCIC_FAILED);
+ isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT);
+ } else /* / @todo Now what do we want to do in this case? */
+ dev_err(&ihost->pdev->dev,
+ "%s: Controller timer fired when controller was not "
+ "in a state being timed.\n",
+ __func__);
+
+done:
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
+
+static enum sci_status sci_controller_construct(struct isci_host *ihost,
+ void __iomem *scu_base,
+ void __iomem *smu_base)
+{
+ u8 i;
+
+ sci_init_sm(&ihost->sm, sci_controller_state_table, SCIC_INITIAL);
+
+ ihost->scu_registers = scu_base;
+ ihost->smu_registers = smu_base;
+
+ sci_port_configuration_agent_construct(&ihost->port_agent);
+
+ /* Construct the ports for this controller */
+ for (i = 0; i < SCI_MAX_PORTS; i++)
+ sci_port_construct(&ihost->ports[i], i, ihost);
+ sci_port_construct(&ihost->ports[i], SCIC_SDS_DUMMY_PORT, ihost);
+
+ /* Construct the phys for this controller */
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ /* Add all the PHYs to the dummy port */
+ sci_phy_construct(&ihost->phys[i],
+ &ihost->ports[SCI_MAX_PORTS], i);
+ }
+
+ ihost->invalid_phy_mask = 0;
+
+ sci_init_timer(&ihost->timer, controller_timeout);
+
+ /* Initialize the User and OEM parameters to default values. */
+ sci_controller_set_default_config_parameters(ihost);
+
+ return sci_controller_reset(ihost);
+}
+
+int sci_oem_parameters_validate(struct sci_oem_params *oem)
+{
+ int i;
+
+ for (i = 0; i < SCI_MAX_PORTS; i++)
+ if (oem->ports[i].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX)
+ return -EINVAL;
+
+ for (i = 0; i < SCI_MAX_PHYS; i++)
+ if (oem->phys[i].sas_address.high == 0 &&
+ oem->phys[i].sas_address.low == 0)
+ return -EINVAL;
+
+ if (oem->controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) {
+ for (i = 0; i < SCI_MAX_PHYS; i++)
+ if (oem->ports[i].phy_mask != 0)
+ return -EINVAL;
+ } else if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
+ u8 phy_mask = 0;
+
+ for (i = 0; i < SCI_MAX_PHYS; i++)
+ phy_mask |= oem->ports[i].phy_mask;
+
+ if (phy_mask == 0)
+ return -EINVAL;
+ } else
+ return -EINVAL;
+
+ if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT)
+ return -EINVAL;
+
+ return 0;
+}
+
+static enum sci_status sci_oem_parameters_set(struct isci_host *ihost)
+{
+ u32 state = ihost->sm.current_state_id;
+
+ if (state == SCIC_RESET ||
+ state == SCIC_INITIALIZING ||
+ state == SCIC_INITIALIZED) {
+
+ if (sci_oem_parameters_validate(&ihost->oem_parameters))
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE_INVALID_STATE;
+}
+
+static void power_control_timeout(unsigned long data)
+{
+ struct sci_timer *tmr = (struct sci_timer *)data;
+ struct isci_host *ihost = container_of(tmr, typeof(*ihost), power_control.timer);
+ struct isci_phy *iphy;
+ unsigned long flags;
+ u8 i;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (tmr->cancel)
+ goto done;
+
+ ihost->power_control.phys_granted_power = 0;
+
+ if (ihost->power_control.phys_waiting == 0) {
+ ihost->power_control.timer_started = false;
+ goto done;
+ }
+
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+
+ if (ihost->power_control.phys_waiting == 0)
+ break;
+
+ iphy = ihost->power_control.requesters[i];
+ if (iphy == NULL)
+ continue;
+
+ if (ihost->power_control.phys_granted_power >=
+ ihost->oem_parameters.controller.max_concurrent_dev_spin_up)
+ break;
+
+ ihost->power_control.requesters[i] = NULL;
+ ihost->power_control.phys_waiting--;
+ ihost->power_control.phys_granted_power++;
+ sci_phy_consume_power_handler(iphy);
+ }
+
+ /*
+ * It doesn't matter if the power list is empty, we need to start the
+ * timer in case another phy becomes ready.
+ */
+ sci_mod_timer(tmr, SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
+ ihost->power_control.timer_started = true;
+
+done:
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
+
+void sci_controller_power_control_queue_insert(struct isci_host *ihost,
+ struct isci_phy *iphy)
+{
+ BUG_ON(iphy == NULL);
+
+ if (ihost->power_control.phys_granted_power <
+ ihost->oem_parameters.controller.max_concurrent_dev_spin_up) {
+ ihost->power_control.phys_granted_power++;
+ sci_phy_consume_power_handler(iphy);
+
+ /*
+ * stop and start the power_control timer. When the timer fires, the
+ * no_of_phys_granted_power will be set to 0
+ */
+ if (ihost->power_control.timer_started)
+ sci_del_timer(&ihost->power_control.timer);
+
+ sci_mod_timer(&ihost->power_control.timer,
+ SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL);
+ ihost->power_control.timer_started = true;
+
+ } else {
+ /* Add the phy in the waiting list */
+ ihost->power_control.requesters[iphy->phy_index] = iphy;
+ ihost->power_control.phys_waiting++;
+ }
+}
+
+void sci_controller_power_control_queue_remove(struct isci_host *ihost,
+ struct isci_phy *iphy)
+{
+ BUG_ON(iphy == NULL);
+
+ if (ihost->power_control.requesters[iphy->phy_index])
+ ihost->power_control.phys_waiting--;
+
+ ihost->power_control.requesters[iphy->phy_index] = NULL;
+}
+
+#define AFE_REGISTER_WRITE_DELAY 10
+
+/* Initialize the AFE for this phy index. We need to read the AFE setup from
+ * the OEM parameters
+ */
+static void sci_controller_afe_initialization(struct isci_host *ihost)
+{
+ const struct sci_oem_params *oem = &ihost->oem_parameters;
+ struct pci_dev *pdev = ihost->pdev;
+ u32 afe_status;
+ u32 phy_id;
+
+ /* Clear DFX Status registers */
+ writel(0x0081000f, &ihost->scu_registers->afe.afe_dfx_master_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ if (is_b0(pdev)) {
+ /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement
+ * Timer, PM Stagger Timer */
+ writel(0x0007BFFF, &ihost->scu_registers->afe.afe_pmsn_master_control2);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ /* Configure bias currents to normal */
+ if (is_a2(pdev))
+ writel(0x00005A00, &ihost->scu_registers->afe.afe_bias_control);
+ else if (is_b0(pdev) || is_c0(pdev))
+ writel(0x00005F00, &ihost->scu_registers->afe.afe_bias_control);
+
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Enable PLL */
+ if (is_b0(pdev) || is_c0(pdev))
+ writel(0x80040A08, &ihost->scu_registers->afe.afe_pll_control0);
+ else
+ writel(0x80040908, &ihost->scu_registers->afe.afe_pll_control0);
+
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Wait for the PLL to lock */
+ do {
+ afe_status = readl(&ihost->scu_registers->afe.afe_common_block_status);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ } while ((afe_status & 0x00001000) == 0);
+
+ if (is_a2(pdev)) {
+ /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */
+ writel(0x7bcc96ad, &ihost->scu_registers->afe.afe_pmsn_master_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) {
+ const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id];
+
+ if (is_b0(pdev)) {
+ /* Configure transmitter SSC parameters */
+ writel(0x00030000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ } else if (is_c0(pdev)) {
+ /* Configure transmitter SSC parameters */
+ writel(0x0003000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /*
+ * All defaults, except the Receive Word Alignament/Comma Detect
+ * Enable....(0xe800) */
+ writel(0x00004500, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ } else {
+ /*
+ * All defaults, except the Receive Word Alignament/Comma Detect
+ * Enable....(0xe800) */
+ writel(0x00004512, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(0x0050100F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ /*
+ * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
+ * & increase TX int & ext bias 20%....(0xe85c) */
+ if (is_a2(pdev))
+ writel(0x000003F0, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ else if (is_b0(pdev)) {
+ /* Power down TX and RX (PWRDNTX and PWRDNRX) */
+ writel(0x000003D7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /*
+ * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
+ * & increase TX int & ext bias 20%....(0xe85c) */
+ writel(0x000003D4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ } else {
+ writel(0x000001E7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /*
+ * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
+ * & increase TX int & ext bias 20%....(0xe85c) */
+ writel(0x000001E4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ }
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ if (is_a2(pdev)) {
+ /* Enable TX equalization (0xe824) */
+ writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ /*
+ * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On),
+ * RDD=0x0(RX Detect Enabled) ....(0xe800) */
+ writel(0x00004100, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Leave DFE/FFE on */
+ if (is_a2(pdev))
+ writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+ else if (is_b0(pdev)) {
+ writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ /* Enable TX equalization (0xe824) */
+ writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
+ } else {
+ writel(0x0140DF0F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(0x3F6F103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Enable TX equalization (0xe824) */
+ writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
+ }
+
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(oem_phy->afe_tx_amp_control0,
+ &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(oem_phy->afe_tx_amp_control1,
+ &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(oem_phy->afe_tx_amp_control2,
+ &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(oem_phy->afe_tx_amp_control3,
+ &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ }
+
+ /* Transfer control to the PEs */
+ writel(0x00010f00, &ihost->scu_registers->afe.afe_dfx_master_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+}
+
+static void sci_controller_initialize_power_control(struct isci_host *ihost)
+{
+ sci_init_timer(&ihost->power_control.timer, power_control_timeout);
+
+ memset(ihost->power_control.requesters, 0,
+ sizeof(ihost->power_control.requesters));
+
+ ihost->power_control.phys_waiting = 0;
+ ihost->power_control.phys_granted_power = 0;
+}
+
+static enum sci_status sci_controller_initialize(struct isci_host *ihost)
+{
+ struct sci_base_state_machine *sm = &ihost->sm;
+ enum sci_status result = SCI_FAILURE;
+ unsigned long i, state, val;
+
+ if (ihost->sm.current_state_id != SCIC_RESET) {
+ dev_warn(&ihost->pdev->dev,
+ "SCIC Controller initialize operation requested "
+ "in invalid state\n");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ sci_change_state(sm, SCIC_INITIALIZING);
+
+ sci_init_timer(&ihost->phy_timer, phy_startup_timeout);
+
+ ihost->next_phy_to_start = 0;
+ ihost->phy_startup_timer_pending = false;
+
+ sci_controller_initialize_power_control(ihost);
+
+ /*
+ * There is nothing to do here for B0 since we do not have to
+ * program the AFE registers.
+ * / @todo The AFE settings are supposed to be correct for the B0 but
+ * / presently they seem to be wrong. */
+ sci_controller_afe_initialization(ihost);
+
+
+ /* Take the hardware out of reset */
+ writel(0, &ihost->smu_registers->soft_reset_control);
+
+ /*
+ * / @todo Provide meaningfull error code for hardware failure
+ * result = SCI_FAILURE_CONTROLLER_HARDWARE; */
+ for (i = 100; i >= 1; i--) {
+ u32 status;
+
+ /* Loop until the hardware reports success */
+ udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME);
+ status = readl(&ihost->smu_registers->control_status);
+
+ if ((status & SCU_RAM_INIT_COMPLETED) == SCU_RAM_INIT_COMPLETED)
+ break;
+ }
+ if (i == 0)
+ goto out;
+
+ /*
+ * Determine what are the actaul device capacities that the
+ * hardware will support */
+ val = readl(&ihost->smu_registers->device_context_capacity);
+
+ /* Record the smaller of the two capacity values */
+ ihost->logical_port_entries = min(smu_max_ports(val), SCI_MAX_PORTS);
+ ihost->task_context_entries = min(smu_max_task_contexts(val), SCI_MAX_IO_REQUESTS);
+ ihost->remote_node_entries = min(smu_max_rncs(val), SCI_MAX_REMOTE_DEVICES);
+
+ /*
+ * Make all PEs that are unassigned match up with the
+ * logical ports
+ */
+ for (i = 0; i < ihost->logical_port_entries; i++) {
+ struct scu_port_task_scheduler_group_registers __iomem
+ *ptsg = &ihost->scu_registers->peg0.ptsg;
+
+ writel(i, &ptsg->protocol_engine[i]);
+ }
+
+ /* Initialize hardware PCI Relaxed ordering in DMA engines */
+ val = readl(&ihost->scu_registers->sdma.pdma_configuration);
+ val |= SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
+ writel(val, &ihost->scu_registers->sdma.pdma_configuration);
+
+ val = readl(&ihost->scu_registers->sdma.cdma_configuration);
+ val |= SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE);
+ writel(val, &ihost->scu_registers->sdma.cdma_configuration);
+
+ /*
+ * Initialize the PHYs before the PORTs because the PHY registers
+ * are accessed during the port initialization.
+ */
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ result = sci_phy_initialize(&ihost->phys[i],
+ &ihost->scu_registers->peg0.pe[i].tl,
+ &ihost->scu_registers->peg0.pe[i].ll);
+ if (result != SCI_SUCCESS)
+ goto out;
+ }
+
+ for (i = 0; i < ihost->logical_port_entries; i++) {
+ struct isci_port *iport = &ihost->ports[i];
+
+ iport->port_task_scheduler_registers = &ihost->scu_registers->peg0.ptsg.port[i];
+ iport->port_pe_configuration_register = &ihost->scu_registers->peg0.ptsg.protocol_engine[0];
+ iport->viit_registers = &ihost->scu_registers->peg0.viit[i];
+ }
+
+ result = sci_port_configuration_agent_initialize(ihost, &ihost->port_agent);
+
+ out:
+ /* Advance the controller state machine */
+ if (result == SCI_SUCCESS)
+ state = SCIC_INITIALIZED;
+ else
+ state = SCIC_FAILED;
+ sci_change_state(sm, state);
+
+ return result;
+}
+
+static enum sci_status sci_user_parameters_set(struct isci_host *ihost,
+ struct sci_user_parameters *sci_parms)
+{
+ u32 state = ihost->sm.current_state_id;
+
+ if (state == SCIC_RESET ||
+ state == SCIC_INITIALIZING ||
+ state == SCIC_INITIALIZED) {
+ u16 index;
+
+ /*
+ * Validate the user parameters. If they are not legal, then
+ * return a failure.
+ */
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ struct sci_phy_user_params *user_phy;
+
+ user_phy = &sci_parms->phys[index];
+
+ if (!((user_phy->max_speed_generation <=
+ SCIC_SDS_PARM_MAX_SPEED) &&
+ (user_phy->max_speed_generation >
+ SCIC_SDS_PARM_NO_SPEED)))
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+ if (user_phy->in_connection_align_insertion_frequency <
+ 3)
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+ if ((user_phy->in_connection_align_insertion_frequency <
+ 3) ||
+ (user_phy->align_insertion_frequency == 0) ||
+ (user_phy->
+ notify_enable_spin_up_insertion_frequency ==
+ 0))
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+ }
+
+ if ((sci_parms->stp_inactivity_timeout == 0) ||
+ (sci_parms->ssp_inactivity_timeout == 0) ||
+ (sci_parms->stp_max_occupancy_timeout == 0) ||
+ (sci_parms->ssp_max_occupancy_timeout == 0) ||
+ (sci_parms->no_outbound_task_timeout == 0))
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
+ memcpy(&ihost->user_parameters, sci_parms, sizeof(*sci_parms));
+
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE_INVALID_STATE;
+}
+
+static int sci_controller_mem_init(struct isci_host *ihost)
+{
+ struct device *dev = &ihost->pdev->dev;
+ dma_addr_t dma;
+ size_t size;
+ int err;
+
+ size = SCU_MAX_COMPLETION_QUEUE_ENTRIES * sizeof(u32);
+ ihost->completion_queue = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL);
+ if (!ihost->completion_queue)
+ return -ENOMEM;
+
+ writel(lower_32_bits(dma), &ihost->smu_registers->completion_queue_lower);
+ writel(upper_32_bits(dma), &ihost->smu_registers->completion_queue_upper);
+
+ size = ihost->remote_node_entries * sizeof(union scu_remote_node_context);
+ ihost->remote_node_context_table = dmam_alloc_coherent(dev, size, &dma,
+ GFP_KERNEL);
+ if (!ihost->remote_node_context_table)
+ return -ENOMEM;
+
+ writel(lower_32_bits(dma), &ihost->smu_registers->remote_node_context_lower);
+ writel(upper_32_bits(dma), &ihost->smu_registers->remote_node_context_upper);
+
+ size = ihost->task_context_entries * sizeof(struct scu_task_context),
+ ihost->task_context_table = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL);
+ if (!ihost->task_context_table)
+ return -ENOMEM;
+
+ ihost->task_context_dma = dma;
+ writel(lower_32_bits(dma), &ihost->smu_registers->host_task_table_lower);
+ writel(upper_32_bits(dma), &ihost->smu_registers->host_task_table_upper);
+
+ err = sci_unsolicited_frame_control_construct(ihost);
+ if (err)
+ return err;
+
+ /*
+ * Inform the silicon as to the location of the UF headers and
+ * address table.
+ */
+ writel(lower_32_bits(ihost->uf_control.headers.physical_address),
+ &ihost->scu_registers->sdma.uf_header_base_address_lower);
+ writel(upper_32_bits(ihost->uf_control.headers.physical_address),
+ &ihost->scu_registers->sdma.uf_header_base_address_upper);
+
+ writel(lower_32_bits(ihost->uf_control.address_table.physical_address),
+ &ihost->scu_registers->sdma.uf_address_table_lower);
+ writel(upper_32_bits(ihost->uf_control.address_table.physical_address),
+ &ihost->scu_registers->sdma.uf_address_table_upper);
+
+ return 0;
+}
+
+int isci_host_init(struct isci_host *ihost)
+{
+ int err = 0, i;
+ enum sci_status status;
+ struct sci_user_parameters sci_user_params;
+ struct isci_pci_info *pci_info = to_pci_info(ihost->pdev);
+
+ spin_lock_init(&ihost->state_lock);
+ spin_lock_init(&ihost->scic_lock);
+ init_waitqueue_head(&ihost->eventq);
+
+ isci_host_change_state(ihost, isci_starting);
+
+ status = sci_controller_construct(ihost, scu_base(ihost),
+ smu_base(ihost));
+
+ if (status != SCI_SUCCESS) {
+ dev_err(&ihost->pdev->dev,
+ "%s: sci_controller_construct failed - status = %x\n",
+ __func__,
+ status);
+ return -ENODEV;
+ }
+
+ ihost->sas_ha.dev = &ihost->pdev->dev;
+ ihost->sas_ha.lldd_ha = ihost;
+
+ /*
+ * grab initial values stored in the controller object for OEM and USER
+ * parameters
+ */
+ isci_user_parameters_get(&sci_user_params);
+ status = sci_user_parameters_set(ihost, &sci_user_params);
+ if (status != SCI_SUCCESS) {
+ dev_warn(&ihost->pdev->dev,
+ "%s: sci_user_parameters_set failed\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ /* grab any OEM parameters specified in orom */
+ if (pci_info->orom) {
+ status = isci_parse_oem_parameters(&ihost->oem_parameters,
+ pci_info->orom,
+ ihost->id);
+ if (status != SCI_SUCCESS) {
+ dev_warn(&ihost->pdev->dev,
+ "parsing firmware oem parameters failed\n");
+ return -EINVAL;
+ }
+ }
+
+ status = sci_oem_parameters_set(ihost);
+ if (status != SCI_SUCCESS) {
+ dev_warn(&ihost->pdev->dev,
+ "%s: sci_oem_parameters_set failed\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ tasklet_init(&ihost->completion_tasklet,
+ isci_host_completion_routine, (unsigned long)ihost);
+
+ INIT_LIST_HEAD(&ihost->requests_to_complete);
+ INIT_LIST_HEAD(&ihost->requests_to_errorback);
+
+ spin_lock_irq(&ihost->scic_lock);
+ status = sci_controller_initialize(ihost);
+ spin_unlock_irq(&ihost->scic_lock);
+ if (status != SCI_SUCCESS) {
+ dev_warn(&ihost->pdev->dev,
+ "%s: sci_controller_initialize failed -"
+ " status = 0x%x\n",
+ __func__, status);
+ return -ENODEV;
+ }
+
+ err = sci_controller_mem_init(ihost);
+ if (err)
+ return err;
+
+ for (i = 0; i < SCI_MAX_PORTS; i++)
+ isci_port_init(&ihost->ports[i], ihost, i);
+
+ for (i = 0; i < SCI_MAX_PHYS; i++)
+ isci_phy_init(&ihost->phys[i], ihost, i);
+
+ for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) {
+ struct isci_remote_device *idev = &ihost->devices[i];
+
+ INIT_LIST_HEAD(&idev->reqs_in_process);
+ INIT_LIST_HEAD(&idev->node);
+ }
+
+ for (i = 0; i < SCI_MAX_IO_REQUESTS; i++) {
+ struct isci_request *ireq;
+ dma_addr_t dma;
+
+ ireq = dmam_alloc_coherent(&ihost->pdev->dev,
+ sizeof(struct isci_request), &dma,
+ GFP_KERNEL);
+ if (!ireq)
+ return -ENOMEM;
+
+ ireq->tc = &ihost->task_context_table[i];
+ ireq->owning_controller = ihost;
+ spin_lock_init(&ireq->state_lock);
+ ireq->request_daddr = dma;
+ ireq->isci_host = ihost;
+ ihost->reqs[i] = ireq;
+ }
+
+ return 0;
+}
+
+void sci_controller_link_up(struct isci_host *ihost, struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ switch (ihost->sm.current_state_id) {
+ case SCIC_STARTING:
+ sci_del_timer(&ihost->phy_timer);
+ ihost->phy_startup_timer_pending = false;
+ ihost->port_agent.link_up_handler(ihost, &ihost->port_agent,
+ iport, iphy);
+ sci_controller_start_next_phy(ihost);
+ break;
+ case SCIC_READY:
+ ihost->port_agent.link_up_handler(ihost, &ihost->port_agent,
+ iport, iphy);
+ break;
+ default:
+ dev_dbg(&ihost->pdev->dev,
+ "%s: SCIC Controller linkup event from phy %d in "
+ "unexpected state %d\n", __func__, iphy->phy_index,
+ ihost->sm.current_state_id);
+ }
+}
+
+void sci_controller_link_down(struct isci_host *ihost, struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ switch (ihost->sm.current_state_id) {
+ case SCIC_STARTING:
+ case SCIC_READY:
+ ihost->port_agent.link_down_handler(ihost, &ihost->port_agent,
+ iport, iphy);
+ break;
+ default:
+ dev_dbg(&ihost->pdev->dev,
+ "%s: SCIC Controller linkdown event from phy %d in "
+ "unexpected state %d\n",
+ __func__,
+ iphy->phy_index,
+ ihost->sm.current_state_id);
+ }
+}
+
+static bool sci_controller_has_remote_devices_stopping(struct isci_host *ihost)
+{
+ u32 index;
+
+ for (index = 0; index < ihost->remote_node_entries; index++) {
+ if ((ihost->device_table[index] != NULL) &&
+ (ihost->device_table[index]->sm.current_state_id == SCI_DEV_STOPPING))
+ return true;
+ }
+
+ return false;
+}
+
+void sci_controller_remote_device_stopped(struct isci_host *ihost,
+ struct isci_remote_device *idev)
+{
+ if (ihost->sm.current_state_id != SCIC_STOPPING) {
+ dev_dbg(&ihost->pdev->dev,
+ "SCIC Controller 0x%p remote device stopped event "
+ "from device 0x%p in unexpected state %d\n",
+ ihost, idev,
+ ihost->sm.current_state_id);
+ return;
+ }
+
+ if (!sci_controller_has_remote_devices_stopping(ihost))
+ sci_change_state(&ihost->sm, SCIC_STOPPED);
+}
+
+void sci_controller_post_request(struct isci_host *ihost, u32 request)
+{
+ dev_dbg(&ihost->pdev->dev, "%s[%d]: %#x\n",
+ __func__, ihost->id, request);
+
+ writel(request, &ihost->smu_registers->post_context_port);
+}
+
+struct isci_request *sci_request_by_tag(struct isci_host *ihost, u16 io_tag)
+{
+ u16 task_index;
+ u16 task_sequence;
+
+ task_index = ISCI_TAG_TCI(io_tag);
+
+ if (task_index < ihost->task_context_entries) {
+ struct isci_request *ireq = ihost->reqs[task_index];
+
+ if (test_bit(IREQ_ACTIVE, &ireq->flags)) {
+ task_sequence = ISCI_TAG_SEQ(io_tag);
+
+ if (task_sequence == ihost->io_request_sequence[task_index])
+ return ireq;
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * This method allocates remote node index and the reserves the remote node
+ * context space for use. This method can fail if there are no more remote
+ * node index available.
+ * @scic: This is the controller object which contains the set of
+ * free remote node ids
+ * @sci_dev: This is the device object which is requesting the a remote node
+ * id
+ * @node_id: This is the remote node id that is assinged to the device if one
+ * is available
+ *
+ * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote
+ * node index available.
+ */
+enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ u16 *node_id)
+{
+ u16 node_index;
+ u32 remote_node_count = sci_remote_device_node_count(idev);
+
+ node_index = sci_remote_node_table_allocate_remote_node(
+ &ihost->available_remote_nodes, remote_node_count
+ );
+
+ if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) {
+ ihost->device_table[node_index] = idev;
+
+ *node_id = node_index;
+
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE_INSUFFICIENT_RESOURCES;
+}
+
+void sci_controller_free_remote_node_context(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ u16 node_id)
+{
+ u32 remote_node_count = sci_remote_device_node_count(idev);
+
+ if (ihost->device_table[node_id] == idev) {
+ ihost->device_table[node_id] = NULL;
+
+ sci_remote_node_table_release_remote_node_index(
+ &ihost->available_remote_nodes, remote_node_count, node_id
+ );
+ }
+}
+
+void sci_controller_copy_sata_response(void *response_buffer,
+ void *frame_header,
+ void *frame_buffer)
+{
+ /* XXX type safety? */
+ memcpy(response_buffer, frame_header, sizeof(u32));
+
+ memcpy(response_buffer + sizeof(u32),
+ frame_buffer,
+ sizeof(struct dev_to_host_fis) - sizeof(u32));
+}
+
+void sci_controller_release_frame(struct isci_host *ihost, u32 frame_index)
+{
+ if (sci_unsolicited_frame_control_release_frame(&ihost->uf_control, frame_index))
+ writel(ihost->uf_control.get,
+ &ihost->scu_registers->sdma.unsolicited_frame_get_pointer);
+}
+
+void isci_tci_free(struct isci_host *ihost, u16 tci)
+{
+ u16 tail = ihost->tci_tail & (SCI_MAX_IO_REQUESTS-1);
+
+ ihost->tci_pool[tail] = tci;
+ ihost->tci_tail = tail + 1;
+}
+
+static u16 isci_tci_alloc(struct isci_host *ihost)
+{
+ u16 head = ihost->tci_head & (SCI_MAX_IO_REQUESTS-1);
+ u16 tci = ihost->tci_pool[head];
+
+ ihost->tci_head = head + 1;
+ return tci;
+}
+
+static u16 isci_tci_space(struct isci_host *ihost)
+{
+ return CIRC_SPACE(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS);
+}
+
+u16 isci_alloc_tag(struct isci_host *ihost)
+{
+ if (isci_tci_space(ihost)) {
+ u16 tci = isci_tci_alloc(ihost);
+ u8 seq = ihost->io_request_sequence[tci];
+
+ return ISCI_TAG(seq, tci);
+ }
+
+ return SCI_CONTROLLER_INVALID_IO_TAG;
+}
+
+enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag)
+{
+ u16 tci = ISCI_TAG_TCI(io_tag);
+ u16 seq = ISCI_TAG_SEQ(io_tag);
+
+ /* prevent tail from passing head */
+ if (isci_tci_active(ihost) == 0)
+ return SCI_FAILURE_INVALID_IO_TAG;
+
+ if (seq == ihost->io_request_sequence[tci]) {
+ ihost->io_request_sequence[tci] = (seq+1) & (SCI_MAX_SEQ-1);
+
+ isci_tci_free(ihost, tci);
+
+ return SCI_SUCCESS;
+ }
+ return SCI_FAILURE_INVALID_IO_TAG;
+}
+
+enum sci_status sci_controller_start_io(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ enum sci_status status;
+
+ if (ihost->sm.current_state_id != SCIC_READY) {
+ dev_warn(&ihost->pdev->dev, "invalid state to start I/O");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ status = sci_remote_device_start_io(ihost, idev, ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ set_bit(IREQ_ACTIVE, &ireq->flags);
+ sci_controller_post_request(ihost, ireq->post_context);
+ return SCI_SUCCESS;
+}
+
+enum sci_status sci_controller_terminate_request(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ /* terminate an ongoing (i.e. started) core IO request. This does not
+ * abort the IO request at the target, but rather removes the IO
+ * request from the host controller.
+ */
+ enum sci_status status;
+
+ if (ihost->sm.current_state_id != SCIC_READY) {
+ dev_warn(&ihost->pdev->dev,
+ "invalid state to terminate request\n");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ status = sci_io_request_terminate(ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ /*
+ * Utilize the original post context command and or in the POST_TC_ABORT
+ * request sub-type.
+ */
+ sci_controller_post_request(ihost,
+ ireq->post_context | SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT);
+ return SCI_SUCCESS;
+}
+
+/**
+ * sci_controller_complete_io() - This method will perform core specific
+ * completion operations for an IO request. After this method is invoked,
+ * the user should consider the IO request as invalid until it is properly
+ * reused (i.e. re-constructed).
+ * @ihost: The handle to the controller object for which to complete the
+ * IO request.
+ * @idev: The handle to the remote device object for which to complete
+ * the IO request.
+ * @ireq: the handle to the io request object to complete.
+ */
+enum sci_status sci_controller_complete_io(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ enum sci_status status;
+ u16 index;
+
+ switch (ihost->sm.current_state_id) {
+ case SCIC_STOPPING:
+ /* XXX: Implement this function */
+ return SCI_FAILURE;
+ case SCIC_READY:
+ status = sci_remote_device_complete_io(ihost, idev, ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ index = ISCI_TAG_TCI(ireq->io_tag);
+ clear_bit(IREQ_ACTIVE, &ireq->flags);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(&ihost->pdev->dev, "invalid state to complete I/O");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+}
+
+enum sci_status sci_controller_continue_io(struct isci_request *ireq)
+{
+ struct isci_host *ihost = ireq->owning_controller;
+
+ if (ihost->sm.current_state_id != SCIC_READY) {
+ dev_warn(&ihost->pdev->dev, "invalid state to continue I/O");
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ set_bit(IREQ_ACTIVE, &ireq->flags);
+ sci_controller_post_request(ihost, ireq->post_context);
+ return SCI_SUCCESS;
+}
+
+/**
+ * sci_controller_start_task() - This method is called by the SCIC user to
+ * send/start a framework task management request.
+ * @controller: the handle to the controller object for which to start the task
+ * management request.
+ * @remote_device: the handle to the remote device object for which to start
+ * the task management request.
+ * @task_request: the handle to the task request object to start.
+ */
+enum sci_task_status sci_controller_start_task(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ enum sci_status status;
+
+ if (ihost->sm.current_state_id != SCIC_READY) {
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC Controller starting task from invalid "
+ "state\n",
+ __func__);
+ return SCI_TASK_FAILURE_INVALID_STATE;
+ }
+
+ status = sci_remote_device_start_task(ihost, idev, ireq);
+ switch (status) {
+ case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS:
+ set_bit(IREQ_ACTIVE, &ireq->flags);
+
+ /*
+ * We will let framework know this task request started successfully,
+ * although core is still woring on starting the request (to post tc when
+ * RNC is resumed.)
+ */
+ return SCI_SUCCESS;
+ case SCI_SUCCESS:
+ set_bit(IREQ_ACTIVE, &ireq->flags);
+ sci_controller_post_request(ihost, ireq->post_context);
+ break;
+ default:
+ break;
+ }
+
+ return status;
+}
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
new file mode 100644
index 0000000..062101a
--- /dev/null
+++ b/drivers/scsi/isci/host.h
@@ -0,0 +1,542 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _SCI_HOST_H_
+#define _SCI_HOST_H_
+
+#include "remote_device.h"
+#include "phy.h"
+#include "isci.h"
+#include "remote_node_table.h"
+#include "registers.h"
+#include "unsolicited_frame_control.h"
+#include "probe_roms.h"
+
+struct isci_request;
+struct scu_task_context;
+
+
+/**
+ * struct sci_power_control -
+ *
+ * This structure defines the fields for managing power control for direct
+ * attached disk devices.
+ */
+struct sci_power_control {
+ /**
+ * This field is set when the power control timer is running and cleared when
+ * it is not.
+ */
+ bool timer_started;
+
+ /**
+ * Timer to control when the directed attached disks can consume power.
+ */
+ struct sci_timer timer;
+
+ /**
+ * This field is used to keep track of how many phys are put into the
+ * requesters field.
+ */
+ u8 phys_waiting;
+
+ /**
+ * This field is used to keep track of how many phys have been granted to consume power
+ */
+ u8 phys_granted_power;
+
+ /**
+ * This field is an array of phys that we are waiting on. The phys are direct
+ * mapped into requesters via struct sci_phy.phy_index
+ */
+ struct isci_phy *requesters[SCI_MAX_PHYS];
+
+};
+
+struct sci_port_configuration_agent;
+typedef void (*port_config_fn)(struct isci_host *,
+ struct sci_port_configuration_agent *,
+ struct isci_port *, struct isci_phy *);
+
+struct sci_port_configuration_agent {
+ u16 phy_configured_mask;
+ u16 phy_ready_mask;
+ struct {
+ u8 min_index;
+ u8 max_index;
+ } phy_valid_port_range[SCI_MAX_PHYS];
+ bool timer_pending;
+ port_config_fn link_up_handler;
+ port_config_fn link_down_handler;
+ struct sci_timer timer;
+};
+
+/**
+ * isci_host - primary host/controller object
+ * @timer: timeout start/stop operations
+ * @device_table: rni (hw remote node index) to remote device lookup table
+ * @available_remote_nodes: rni allocator
+ * @power_control: manage device spin up
+ * @io_request_sequence: generation number for tci's (task contexts)
+ * @task_context_table: hw task context table
+ * @remote_node_context_table: hw remote node context table
+ * @completion_queue: hw-producer driver-consumer communication ring
+ * @completion_queue_get: tracks the driver 'head' of the ring to notify hw
+ * @logical_port_entries: min({driver|silicon}-supported-port-count)
+ * @remote_node_entries: min({driver|silicon}-supported-node-count)
+ * @task_context_entries: min({driver|silicon}-supported-task-count)
+ * @phy_timer: phy startup timer
+ * @invalid_phy_mask: if an invalid_link_up notification is reported a bit for
+ * the phy index is set so further notifications are not
+ * made. Once the phy reports link up and is made part of a
+ * port then this bit is cleared.
+
+ */
+struct isci_host {
+ struct sci_base_state_machine sm;
+ /* XXX can we time this externally */
+ struct sci_timer timer;
+ /* XXX drop reference module params directly */
+ struct sci_user_parameters user_parameters;
+ /* XXX no need to be a union */
+ struct sci_oem_params oem_parameters;
+ struct sci_port_configuration_agent port_agent;
+ struct isci_remote_device *device_table[SCI_MAX_REMOTE_DEVICES];
+ struct sci_remote_node_table available_remote_nodes;
+ struct sci_power_control power_control;
+ u8 io_request_sequence[SCI_MAX_IO_REQUESTS];
+ struct scu_task_context *task_context_table;
+ dma_addr_t task_context_dma;
+ union scu_remote_node_context *remote_node_context_table;
+ u32 *completion_queue;
+ u32 completion_queue_get;
+ u32 logical_port_entries;
+ u32 remote_node_entries;
+ u32 task_context_entries;
+ struct sci_unsolicited_frame_control uf_control;
+
+ /* phy startup */
+ struct sci_timer phy_timer;
+ /* XXX kill */
+ bool phy_startup_timer_pending;
+ u32 next_phy_to_start;
+ /* XXX convert to unsigned long and use bitops */
+ u8 invalid_phy_mask;
+
+ /* TODO attempt dynamic interrupt coalescing scheme */
+ u16 interrupt_coalesce_number;
+ u32 interrupt_coalesce_timeout;
+ struct smu_registers __iomem *smu_registers;
+ struct scu_registers __iomem *scu_registers;
+
+ u16 tci_head;
+ u16 tci_tail;
+ u16 tci_pool[SCI_MAX_IO_REQUESTS];
+
+ int id; /* unique within a given pci device */
+ struct isci_phy phys[SCI_MAX_PHYS];
+ struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */
+ struct sas_ha_struct sas_ha;
+
+ spinlock_t state_lock;
+ struct pci_dev *pdev;
+ enum isci_status status;
+ #define IHOST_START_PENDING 0
+ #define IHOST_STOP_PENDING 1
+ unsigned long flags;
+ wait_queue_head_t eventq;
+ struct Scsi_Host *shost;
+ struct tasklet_struct completion_tasklet;
+ struct list_head requests_to_complete;
+ struct list_head requests_to_errorback;
+ spinlock_t scic_lock;
+ struct isci_request *reqs[SCI_MAX_IO_REQUESTS];
+ struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES];
+};
+
+/**
+ * enum sci_controller_states - This enumeration depicts all the states
+ * for the common controller state machine.
+ */
+enum sci_controller_states {
+ /**
+ * Simply the initial state for the base controller state machine.
+ */
+ SCIC_INITIAL = 0,
+
+ /**
+ * This state indicates that the controller is reset. The memory for
+ * the controller is in it's initial state, but the controller requires
+ * initialization.
+ * This state is entered from the INITIAL state.
+ * This state is entered from the RESETTING state.
+ */
+ SCIC_RESET,
+
+ /**
+ * This state is typically an action state that indicates the controller
+ * is in the process of initialization. In this state no new IO operations
+ * are permitted.
+ * This state is entered from the RESET state.
+ */
+ SCIC_INITIALIZING,
+
+ /**
+ * This state indicates that the controller has been successfully
+ * initialized. In this state no new IO operations are permitted.
+ * This state is entered from the INITIALIZING state.
+ */
+ SCIC_INITIALIZED,
+
+ /**
+ * This state indicates the the controller is in the process of becoming
+ * ready (i.e. starting). In this state no new IO operations are permitted.
+ * This state is entered from the INITIALIZED state.
+ */
+ SCIC_STARTING,
+
+ /**
+ * This state indicates the controller is now ready. Thus, the user
+ * is able to perform IO operations on the controller.
+ * This state is entered from the STARTING state.
+ */
+ SCIC_READY,
+
+ /**
+ * This state is typically an action state that indicates the controller
+ * is in the process of resetting. Thus, the user is unable to perform
+ * IO operations on the controller. A reset is considered destructive in
+ * most cases.
+ * This state is entered from the READY state.
+ * This state is entered from the FAILED state.
+ * This state is entered from the STOPPED state.
+ */
+ SCIC_RESETTING,
+
+ /**
+ * This state indicates that the controller is in the process of stopping.
+ * In this state no new IO operations are permitted, but existing IO
+ * operations are allowed to complete.
+ * This state is entered from the READY state.
+ */
+ SCIC_STOPPING,
+
+ /**
+ * This state indicates that the controller has successfully been stopped.
+ * In this state no new IO operations are permitted.
+ * This state is entered from the STOPPING state.
+ */
+ SCIC_STOPPED,
+
+ /**
+ * This state indicates that the controller could not successfully be
+ * initialized. In this state no new IO operations are permitted.
+ * This state is entered from the INITIALIZING state.
+ * This state is entered from the STARTING state.
+ * This state is entered from the STOPPING state.
+ * This state is entered from the RESETTING state.
+ */
+ SCIC_FAILED,
+};
+
+/**
+ * struct isci_pci_info - This class represents the pci function containing the
+ * controllers. Depending on PCI SKU, there could be up to 2 controllers in
+ * the PCI function.
+ */
+#define SCI_MAX_MSIX_INT (SCI_NUM_MSI_X_INT*SCI_MAX_CONTROLLERS)
+
+struct isci_pci_info {
+ struct msix_entry msix_entries[SCI_MAX_MSIX_INT];
+ struct isci_host *hosts[SCI_MAX_CONTROLLERS];
+ struct isci_orom *orom;
+};
+
+static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev)
+{
+ return pci_get_drvdata(pdev);
+}
+
+#define for_each_isci_host(id, ihost, pdev) \
+ for (id = 0, ihost = to_pci_info(pdev)->hosts[id]; \
+ id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \
+ ihost = to_pci_info(pdev)->hosts[++id])
+
+static inline enum isci_status isci_host_get_state(struct isci_host *isci_host)
+{
+ return isci_host->status;
+}
+
+static inline void isci_host_change_state(struct isci_host *isci_host,
+ enum isci_status status)
+{
+ unsigned long flags;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_host = %p, state = 0x%x",
+ __func__,
+ isci_host,
+ status);
+ spin_lock_irqsave(&isci_host->state_lock, flags);
+ isci_host->status = status;
+ spin_unlock_irqrestore(&isci_host->state_lock, flags);
+
+}
+
+static inline void wait_for_start(struct isci_host *ihost)
+{
+ wait_event(ihost->eventq, !test_bit(IHOST_START_PENDING, &ihost->flags));
+}
+
+static inline void wait_for_stop(struct isci_host *ihost)
+{
+ wait_event(ihost->eventq, !test_bit(IHOST_STOP_PENDING, &ihost->flags));
+}
+
+static inline void wait_for_device_start(struct isci_host *ihost, struct isci_remote_device *idev)
+{
+ wait_event(ihost->eventq, !test_bit(IDEV_START_PENDING, &idev->flags));
+}
+
+static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_remote_device *idev)
+{
+ wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags));
+}
+
+static inline struct isci_host *dev_to_ihost(struct domain_device *dev)
+{
+ return dev->port->ha->lldd_ha;
+}
+
+/* we always use protocol engine group zero */
+#define ISCI_PEG 0
+
+/* see sci_controller_io_tag_allocate|free for how seq and tci are built */
+#define ISCI_TAG(seq, tci) (((u16) (seq)) << 12 | tci)
+
+/* these are returned by the hardware, so sanitize them */
+#define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1))
+#define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1))
+
+/* expander attached sata devices require 3 rnc slots */
+static inline int sci_remote_device_node_count(struct isci_remote_device *idev)
+{
+ struct domain_device *dev = idev->domain_dev;
+
+ if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) &&
+ !idev->is_direct_attached)
+ return SCU_STP_REMOTE_NODE_COUNT;
+ return SCU_SSP_REMOTE_NODE_COUNT;
+}
+
+/**
+ * sci_controller_clear_invalid_phy() -
+ *
+ * This macro will clear the bit in the invalid phy mask for this controller
+ * object. This is used to control messages reported for invalid link up
+ * notifications.
+ */
+#define sci_controller_clear_invalid_phy(controller, phy) \
+ ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index))
+
+static inline struct device *sciphy_to_dev(struct isci_phy *iphy)
+{
+
+ if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host)
+ return NULL;
+
+ return &iphy->isci_port->isci_host->pdev->dev;
+}
+
+static inline struct device *sciport_to_dev(struct isci_port *iport)
+{
+
+ if (!iport || !iport->isci_host)
+ return NULL;
+
+ return &iport->isci_host->pdev->dev;
+}
+
+static inline struct device *scirdev_to_dev(struct isci_remote_device *idev)
+{
+ if (!idev || !idev->isci_port || !idev->isci_port->isci_host)
+ return NULL;
+
+ return &idev->isci_port->isci_host->pdev->dev;
+}
+
+static inline bool is_a2(struct pci_dev *pdev)
+{
+ if (pdev->revision < 4)
+ return true;
+ return false;
+}
+
+static inline bool is_b0(struct pci_dev *pdev)
+{
+ if (pdev->revision == 4)
+ return true;
+ return false;
+}
+
+static inline bool is_c0(struct pci_dev *pdev)
+{
+ if (pdev->revision >= 5)
+ return true;
+ return false;
+}
+
+void sci_controller_post_request(struct isci_host *ihost,
+ u32 request);
+void sci_controller_release_frame(struct isci_host *ihost,
+ u32 frame_index);
+void sci_controller_copy_sata_response(void *response_buffer,
+ void *frame_header,
+ void *frame_buffer);
+enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ u16 *node_id);
+void sci_controller_free_remote_node_context(
+ struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ u16 node_id);
+
+struct isci_request *sci_request_by_tag(struct isci_host *ihost,
+ u16 io_tag);
+
+void sci_controller_power_control_queue_insert(
+ struct isci_host *ihost,
+ struct isci_phy *iphy);
+
+void sci_controller_power_control_queue_remove(
+ struct isci_host *ihost,
+ struct isci_phy *iphy);
+
+void sci_controller_link_up(
+ struct isci_host *ihost,
+ struct isci_port *iport,
+ struct isci_phy *iphy);
+
+void sci_controller_link_down(
+ struct isci_host *ihost,
+ struct isci_port *iport,
+ struct isci_phy *iphy);
+
+void sci_controller_remote_device_stopped(
+ struct isci_host *ihost,
+ struct isci_remote_device *idev);
+
+void sci_controller_copy_task_context(
+ struct isci_host *ihost,
+ struct isci_request *ireq);
+
+void sci_controller_register_setup(struct isci_host *ihost);
+
+enum sci_status sci_controller_continue_io(struct isci_request *ireq);
+int isci_host_scan_finished(struct Scsi_Host *, unsigned long);
+void isci_host_scan_start(struct Scsi_Host *);
+u16 isci_alloc_tag(struct isci_host *ihost);
+enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag);
+void isci_tci_free(struct isci_host *ihost, u16 tci);
+
+int isci_host_init(struct isci_host *);
+
+void isci_host_init_controller_names(
+ struct isci_host *isci_host,
+ unsigned int controller_idx);
+
+void isci_host_deinit(
+ struct isci_host *);
+
+void isci_host_port_link_up(
+ struct isci_host *,
+ struct isci_port *,
+ struct isci_phy *);
+int isci_host_dev_found(struct domain_device *);
+
+void isci_host_remote_device_start_complete(
+ struct isci_host *,
+ struct isci_remote_device *,
+ enum sci_status);
+
+void sci_controller_disable_interrupts(
+ struct isci_host *ihost);
+
+enum sci_status sci_controller_start_io(
+ struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq);
+
+enum sci_task_status sci_controller_start_task(
+ struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq);
+
+enum sci_status sci_controller_terminate_request(
+ struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq);
+
+enum sci_status sci_controller_complete_io(
+ struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq);
+
+void sci_port_configuration_agent_construct(
+ struct sci_port_configuration_agent *port_agent);
+
+enum sci_status sci_port_configuration_agent_initialize(
+ struct isci_host *ihost,
+ struct sci_port_configuration_agent *port_agent);
+#endif
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
new file mode 100644
index 0000000..61e0d09
--- /dev/null
+++ b/drivers/scsi/isci/init.c
@@ -0,0 +1,565 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/efi.h>
+#include <asm/string.h>
+#include "isci.h"
+#include "task.h"
+#include "probe_roms.h"
+
+static struct scsi_transport_template *isci_transport_template;
+
+static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = {
+ { PCI_VDEVICE(INTEL, 0x1D61),},
+ { PCI_VDEVICE(INTEL, 0x1D63),},
+ { PCI_VDEVICE(INTEL, 0x1D65),},
+ { PCI_VDEVICE(INTEL, 0x1D67),},
+ { PCI_VDEVICE(INTEL, 0x1D69),},
+ { PCI_VDEVICE(INTEL, 0x1D6B),},
+ { PCI_VDEVICE(INTEL, 0x1D60),},
+ { PCI_VDEVICE(INTEL, 0x1D62),},
+ { PCI_VDEVICE(INTEL, 0x1D64),},
+ { PCI_VDEVICE(INTEL, 0x1D66),},
+ { PCI_VDEVICE(INTEL, 0x1D68),},
+ { PCI_VDEVICE(INTEL, 0x1D6A),},
+ {}
+};
+
+MODULE_DEVICE_TABLE(pci, isci_id_table);
+
+/* linux isci specific settings */
+
+unsigned char no_outbound_task_to = 20;
+module_param(no_outbound_task_to, byte, 0);
+MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)");
+
+u16 ssp_max_occ_to = 20;
+module_param(ssp_max_occ_to, ushort, 0);
+MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)");
+
+u16 stp_max_occ_to = 5;
+module_param(stp_max_occ_to, ushort, 0);
+MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)");
+
+u16 ssp_inactive_to = 5;
+module_param(ssp_inactive_to, ushort, 0);
+MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)");
+
+u16 stp_inactive_to = 5;
+module_param(stp_inactive_to, ushort, 0);
+MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)");
+
+unsigned char phy_gen = 3;
+module_param(phy_gen, byte, 0);
+MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
+
+unsigned char max_concurr_spinup = 1;
+module_param(max_concurr_spinup, byte, 0);
+MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
+
+static struct scsi_host_template isci_sht = {
+
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .proc_name = DRV_NAME,
+ .queuecommand = sas_queuecommand,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = sas_slave_configure,
+ .slave_destroy = sas_slave_destroy,
+ .scan_finished = isci_host_scan_finished,
+ .scan_start = isci_host_scan_start,
+ .change_queue_depth = sas_change_queue_depth,
+ .change_queue_type = sas_change_queue_type,
+ .bios_param = sas_bios_param,
+ .can_queue = ISCI_CAN_QUEUE_VAL,
+ .cmd_per_lun = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .use_clustering = ENABLE_CLUSTERING,
+ .eh_device_reset_handler = sas_eh_device_reset_handler,
+ .eh_bus_reset_handler = isci_bus_reset_handler,
+ .slave_alloc = sas_slave_alloc,
+ .target_destroy = sas_target_destroy,
+ .ioctl = sas_ioctl,
+};
+
+static struct sas_domain_function_template isci_transport_ops = {
+
+ /* The class calls these to notify the LLDD of an event. */
+ .lldd_port_formed = isci_port_formed,
+ .lldd_port_deformed = isci_port_deformed,
+
+ /* The class calls these when a device is found or gone. */
+ .lldd_dev_found = isci_remote_device_found,
+ .lldd_dev_gone = isci_remote_device_gone,
+
+ .lldd_execute_task = isci_task_execute_task,
+ /* Task Management Functions. Must be called from process context. */
+ .lldd_abort_task = isci_task_abort_task,
+ .lldd_abort_task_set = isci_task_abort_task_set,
+ .lldd_clear_aca = isci_task_clear_aca,
+ .lldd_clear_task_set = isci_task_clear_task_set,
+ .lldd_I_T_nexus_reset = isci_task_I_T_nexus_reset,
+ .lldd_lu_reset = isci_task_lu_reset,
+ .lldd_query_task = isci_task_query_task,
+
+ /* Port and Adapter management */
+ .lldd_clear_nexus_port = isci_task_clear_nexus_port,
+ .lldd_clear_nexus_ha = isci_task_clear_nexus_ha,
+
+ /* Phy management */
+ .lldd_control_phy = isci_phy_control,
+};
+
+
+/******************************************************************************
+* P R O T E C T E D M E T H O D S
+******************************************************************************/
+
+
+
+/**
+ * isci_register_sas_ha() - This method initializes various lldd
+ * specific members of the sas_ha struct and calls the libsas
+ * sas_register_ha() function.
+ * @isci_host: This parameter specifies the lldd specific wrapper for the
+ * libsas sas_ha struct.
+ *
+ * This method returns an error code indicating sucess or failure. The user
+ * should check for possible memory allocation error return otherwise, a zero
+ * indicates success.
+ */
+static int isci_register_sas_ha(struct isci_host *isci_host)
+{
+ int i;
+ struct sas_ha_struct *sas_ha = &(isci_host->sas_ha);
+ struct asd_sas_phy **sas_phys;
+ struct asd_sas_port **sas_ports;
+
+ sas_phys = devm_kzalloc(&isci_host->pdev->dev,
+ SCI_MAX_PHYS * sizeof(void *),
+ GFP_KERNEL);
+ if (!sas_phys)
+ return -ENOMEM;
+
+ sas_ports = devm_kzalloc(&isci_host->pdev->dev,
+ SCI_MAX_PORTS * sizeof(void *),
+ GFP_KERNEL);
+ if (!sas_ports)
+ return -ENOMEM;
+
+ /*----------------- Libsas Initialization Stuff----------------------
+ * Set various fields in the sas_ha struct:
+ */
+
+ sas_ha->sas_ha_name = DRV_NAME;
+ sas_ha->lldd_module = THIS_MODULE;
+ sas_ha->sas_addr = &isci_host->phys[0].sas_addr[0];
+
+ /* set the array of phy and port structs. */
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ sas_phys[i] = &isci_host->phys[i].sas_phy;
+ sas_ports[i] = &isci_host->ports[i].sas_port;
+ }
+
+ sas_ha->sas_phy = sas_phys;
+ sas_ha->sas_port = sas_ports;
+ sas_ha->num_phys = SCI_MAX_PHYS;
+
+ sas_ha->lldd_queue_size = ISCI_CAN_QUEUE_VAL;
+ sas_ha->lldd_max_execute_num = 1;
+ sas_ha->strict_wide_ports = 1;
+
+ sas_register_ha(sas_ha);
+
+ return 0;
+}
+
+static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+ struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
+}
+
+static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
+
+static void isci_unregister(struct isci_host *isci_host)
+{
+ struct Scsi_Host *shost;
+
+ if (!isci_host)
+ return;
+
+ shost = isci_host->shost;
+ device_remove_file(&shost->shost_dev, &dev_attr_isci_id);
+
+ sas_unregister_ha(&isci_host->sas_ha);
+
+ sas_remove_host(isci_host->shost);
+ scsi_remove_host(isci_host->shost);
+ scsi_host_put(isci_host->shost);
+}
+
+static int __devinit isci_pci_init(struct pci_dev *pdev)
+{
+ int err, bar_num, bar_mask = 0;
+ void __iomem * const *iomap;
+
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "failed enable PCI device %s!\n",
+ pci_name(pdev));
+ return err;
+ }
+
+ for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++)
+ bar_mask |= 1 << (bar_num * 2);
+
+ err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME);
+ if (err)
+ return err;
+
+ iomap = pcim_iomap_table(pdev);
+ if (!iomap)
+ return -ENOMEM;
+
+ pci_set_master(pdev);
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err) {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err)
+ return err;
+ }
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err) {
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int num_controllers(struct pci_dev *pdev)
+{
+ /* bar size alone can tell us if we are running with a dual controller
+ * part, no need to trust revision ids that might be under broken firmware
+ * control
+ */
+ resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2);
+ resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2);
+
+ if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS &&
+ smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS)
+ return SCI_MAX_CONTROLLERS;
+ else
+ return 1;
+}
+
+static int isci_setup_interrupts(struct pci_dev *pdev)
+{
+ int err, i, num_msix;
+ struct isci_host *ihost;
+ struct isci_pci_info *pci_info = to_pci_info(pdev);
+
+ /*
+ * Determine the number of vectors associated with this
+ * PCI function.
+ */
+ num_msix = num_controllers(pdev) * SCI_NUM_MSI_X_INT;
+
+ for (i = 0; i < num_msix; i++)
+ pci_info->msix_entries[i].entry = i;
+
+ err = pci_enable_msix(pdev, pci_info->msix_entries, num_msix);
+ if (err)
+ goto intx;
+
+ for (i = 0; i < num_msix; i++) {
+ int id = i / SCI_NUM_MSI_X_INT;
+ struct msix_entry *msix = &pci_info->msix_entries[i];
+ irq_handler_t isr;
+
+ ihost = pci_info->hosts[id];
+ /* odd numbered vectors are error interrupts */
+ if (i & 1)
+ isr = isci_error_isr;
+ else
+ isr = isci_msix_isr;
+
+ err = devm_request_irq(&pdev->dev, msix->vector, isr, 0,
+ DRV_NAME"-msix", ihost);
+ if (!err)
+ continue;
+
+ dev_info(&pdev->dev, "msix setup failed falling back to intx\n");
+ while (i--) {
+ id = i / SCI_NUM_MSI_X_INT;
+ ihost = pci_info->hosts[id];
+ msix = &pci_info->msix_entries[i];
+ devm_free_irq(&pdev->dev, msix->vector, ihost);
+ }
+ pci_disable_msix(pdev);
+ goto intx;
+ }
+ return 0;
+
+ intx:
+ for_each_isci_host(i, ihost, pdev) {
+ err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr,
+ IRQF_SHARED, DRV_NAME"-intx", ihost);
+ if (err)
+ break;
+ }
+ return err;
+}
+
+static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
+{
+ struct isci_host *isci_host;
+ struct Scsi_Host *shost;
+ int err;
+
+ isci_host = devm_kzalloc(&pdev->dev, sizeof(*isci_host), GFP_KERNEL);
+ if (!isci_host)
+ return NULL;
+
+ isci_host->pdev = pdev;
+ isci_host->id = id;
+
+ shost = scsi_host_alloc(&isci_sht, sizeof(void *));
+ if (!shost)
+ return NULL;
+ isci_host->shost = shost;
+
+ err = isci_host_init(isci_host);
+ if (err)
+ goto err_shost;
+
+ SHOST_TO_SAS_HA(shost) = &isci_host->sas_ha;
+ isci_host->sas_ha.core.shost = shost;
+ shost->transportt = isci_transport_template;
+
+ shost->max_id = ~0;
+ shost->max_lun = ~0;
+ shost->max_cmd_len = MAX_COMMAND_SIZE;
+
+ err = scsi_add_host(shost, &pdev->dev);
+ if (err)
+ goto err_shost;
+
+ err = isci_register_sas_ha(isci_host);
+ if (err)
+ goto err_shost_remove;
+
+ err = device_create_file(&shost->shost_dev, &dev_attr_isci_id);
+ if (err)
+ goto err_unregister_ha;
+
+ return isci_host;
+
+ err_unregister_ha:
+ sas_unregister_ha(&(isci_host->sas_ha));
+ err_shost_remove:
+ scsi_remove_host(shost);
+ err_shost:
+ scsi_host_put(shost);
+
+ return NULL;
+}
+
+static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct isci_pci_info *pci_info;
+ int err, i;
+ struct isci_host *isci_host;
+ const struct firmware *fw = NULL;
+ struct isci_orom *orom = NULL;
+ char *source = "(platform)";
+
+ dev_info(&pdev->dev, "driver configured for rev: %d silicon\n",
+ pdev->revision);
+
+ pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL);
+ if (!pci_info)
+ return -ENOMEM;
+ pci_set_drvdata(pdev, pci_info);
+
+ if (efi_enabled)
+ orom = isci_get_efi_var(pdev);
+
+ if (!orom)
+ orom = isci_request_oprom(pdev);
+
+ for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) {
+ if (sci_oem_parameters_validate(&orom->ctrl[i])) {
+ dev_warn(&pdev->dev,
+ "[%d]: invalid oem parameters detected, falling back to firmware\n", i);
+ devm_kfree(&pdev->dev, orom);
+ orom = NULL;
+ break;
+ }
+ }
+
+ if (!orom) {
+ source = "(firmware)";
+ orom = isci_request_firmware(pdev, fw);
+ if (!orom) {
+ /* TODO convert this to WARN_TAINT_ONCE once the
+ * orom/efi parameter support is widely available
+ */
+ dev_warn(&pdev->dev,
+ "Loading user firmware failed, using default "
+ "values\n");
+ dev_warn(&pdev->dev,
+ "Default OEM configuration being used: 4 "
+ "narrow ports, and default SAS Addresses\n");
+ }
+ }
+
+ if (orom)
+ dev_info(&pdev->dev,
+ "OEM SAS parameters (version: %u.%u) loaded %s\n",
+ (orom->hdr.version & 0xf0) >> 4,
+ (orom->hdr.version & 0xf), source);
+
+ pci_info->orom = orom;
+
+ err = isci_pci_init(pdev);
+ if (err)
+ return err;
+
+ for (i = 0; i < num_controllers(pdev); i++) {
+ struct isci_host *h = isci_host_alloc(pdev, i);
+
+ if (!h) {
+ err = -ENOMEM;
+ goto err_host_alloc;
+ }
+ pci_info->hosts[i] = h;
+ }
+
+ err = isci_setup_interrupts(pdev);
+ if (err)
+ goto err_host_alloc;
+
+ for_each_isci_host(i, isci_host, pdev)
+ scsi_scan_host(isci_host->shost);
+
+ return 0;
+
+ err_host_alloc:
+ for_each_isci_host(i, isci_host, pdev)
+ isci_unregister(isci_host);
+ return err;
+}
+
+static void __devexit isci_pci_remove(struct pci_dev *pdev)
+{
+ struct isci_host *ihost;
+ int i;
+
+ for_each_isci_host(i, ihost, pdev) {
+ isci_unregister(ihost);
+ isci_host_deinit(ihost);
+ sci_controller_disable_interrupts(ihost);
+ }
+}
+
+static struct pci_driver isci_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = isci_id_table,
+ .probe = isci_pci_probe,
+ .remove = __devexit_p(isci_pci_remove),
+};
+
+static __init int isci_init(void)
+{
+ int err;
+
+ pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME);
+
+ isci_transport_template = sas_domain_attach_transport(&isci_transport_ops);
+ if (!isci_transport_template)
+ return -ENOMEM;
+
+ err = pci_register_driver(&isci_pci_driver);
+ if (err)
+ sas_release_transport(isci_transport_template);
+
+ return err;
+}
+
+static __exit void isci_exit(void)
+{
+ pci_unregister_driver(&isci_pci_driver);
+ sas_release_transport(isci_transport_template);
+}
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_FIRMWARE(ISCI_FW_NAME);
+module_init(isci_init);
+module_exit(isci_exit);
diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h
new file mode 100644
index 0000000..d1de633
--- /dev/null
+++ b/drivers/scsi/isci/isci.h
@@ -0,0 +1,538 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __ISCI_H__
+#define __ISCI_H__
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+
+#define DRV_NAME "isci"
+#define SCI_PCI_BAR_COUNT 2
+#define SCI_NUM_MSI_X_INT 2
+#define SCI_SMU_BAR 0
+#define SCI_SMU_BAR_SIZE (16*1024)
+#define SCI_SCU_BAR 1
+#define SCI_SCU_BAR_SIZE (4*1024*1024)
+#define SCI_IO_SPACE_BAR0 2
+#define SCI_IO_SPACE_BAR1 3
+#define ISCI_CAN_QUEUE_VAL 250 /* < SCI_MAX_IO_REQUESTS ? */
+#define SCIC_CONTROLLER_STOP_TIMEOUT 5000
+
+#define SCI_CONTROLLER_INVALID_IO_TAG 0xFFFF
+
+#define SCI_MAX_PHYS (4UL)
+#define SCI_MAX_PORTS SCI_MAX_PHYS
+#define SCI_MAX_SMP_PHYS (384) /* not silicon constrained */
+#define SCI_MAX_REMOTE_DEVICES (256UL)
+#define SCI_MAX_IO_REQUESTS (256UL)
+#define SCI_MAX_SEQ (16)
+#define SCI_MAX_MSIX_MESSAGES (2)
+#define SCI_MAX_SCATTER_GATHER_ELEMENTS 130 /* not silicon constrained */
+#define SCI_MAX_CONTROLLERS 2
+#define SCI_MAX_DOMAINS SCI_MAX_PORTS
+
+#define SCU_MAX_CRITICAL_NOTIFICATIONS (384)
+#define SCU_MAX_EVENTS_SHIFT (7)
+#define SCU_MAX_EVENTS (1 << SCU_MAX_EVENTS_SHIFT)
+#define SCU_MAX_UNSOLICITED_FRAMES (128)
+#define SCU_MAX_COMPLETION_QUEUE_SCRATCH (128)
+#define SCU_MAX_COMPLETION_QUEUE_ENTRIES (SCU_MAX_CRITICAL_NOTIFICATIONS \
+ + SCU_MAX_EVENTS \
+ + SCU_MAX_UNSOLICITED_FRAMES \
+ + SCI_MAX_IO_REQUESTS \
+ + SCU_MAX_COMPLETION_QUEUE_SCRATCH)
+#define SCU_MAX_COMPLETION_QUEUE_SHIFT (ilog2(SCU_MAX_COMPLETION_QUEUE_ENTRIES))
+
+#define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096)
+#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024)
+#define SCU_INVALID_FRAME_INDEX (0xFFFF)
+
+#define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF)
+#define SCU_IO_REQUEST_MAX_TRANSFER_LENGTH (0x00FFFFFF)
+
+static inline void check_sizes(void)
+{
+ BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_EVENTS);
+ BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES <= 8);
+ BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_UNSOLICITED_FRAMES);
+ BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_COMPLETION_QUEUE_ENTRIES);
+ BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES > SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES);
+ BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_IO_REQUESTS);
+ BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_SEQ);
+}
+
+/**
+ * enum sci_status - This is the general return status enumeration for non-IO,
+ * non-task management related SCI interface methods.
+ *
+ *
+ */
+enum sci_status {
+ /**
+ * This member indicates successful completion.
+ */
+ SCI_SUCCESS = 0,
+
+ /**
+ * This value indicates that the calling method completed successfully,
+ * but that the IO may have completed before having it's start method
+ * invoked. This occurs during SAT translation for requests that do
+ * not require an IO to the target or for any other requests that may
+ * be completed without having to submit IO.
+ */
+ SCI_SUCCESS_IO_COMPLETE_BEFORE_START,
+
+ /**
+ * This Value indicates that the SCU hardware returned an early response
+ * because the io request specified more data than is returned by the
+ * target device (mode pages, inquiry data, etc.). The completion routine
+ * will handle this case to get the actual number of bytes transferred.
+ */
+ SCI_SUCCESS_IO_DONE_EARLY,
+
+ /**
+ * This member indicates that the object for which a state change is
+ * being requested is already in said state.
+ */
+ SCI_WARNING_ALREADY_IN_STATE,
+
+ /**
+ * This member indicates interrupt coalescence timer may cause SAS
+ * specification compliance issues (i.e. SMP target mode response
+ * frames must be returned within 1.9 milliseconds).
+ */
+ SCI_WARNING_TIMER_CONFLICT,
+
+ /**
+ * This field indicates a sequence of action is not completed yet. Mostly,
+ * this status is used when multiple ATA commands are needed in a SATI translation.
+ */
+ SCI_WARNING_SEQUENCE_INCOMPLETE,
+
+ /**
+ * This member indicates that there was a general failure.
+ */
+ SCI_FAILURE,
+
+ /**
+ * This member indicates that the SCI implementation is unable to complete
+ * an operation due to a critical flaw the prevents any further operation
+ * (i.e. an invalid pointer).
+ */
+ SCI_FATAL_ERROR,
+
+ /**
+ * This member indicates the calling function failed, because the state
+ * of the controller is in a state that prevents successful completion.
+ */
+ SCI_FAILURE_INVALID_STATE,
+
+ /**
+ * This member indicates the calling function failed, because there is
+ * insufficient resources/memory to complete the request.
+ */
+ SCI_FAILURE_INSUFFICIENT_RESOURCES,
+
+ /**
+ * This member indicates the calling function failed, because the
+ * controller object required for the operation can't be located.
+ */
+ SCI_FAILURE_CONTROLLER_NOT_FOUND,
+
+ /**
+ * This member indicates the calling function failed, because the
+ * discovered controller type is not supported by the library.
+ */
+ SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE,
+
+ /**
+ * This member indicates the calling function failed, because the
+ * requested initialization data version isn't supported.
+ */
+ SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION,
+
+ /**
+ * This member indicates the calling function failed, because the
+ * requested configuration of SAS Phys into SAS Ports is not supported.
+ */
+ SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION,
+
+ /**
+ * This member indicates the calling function failed, because the
+ * requested protocol is not supported by the remote device, port,
+ * or controller.
+ */
+ SCI_FAILURE_UNSUPPORTED_PROTOCOL,
+
+ /**
+ * This member indicates the calling function failed, because the
+ * requested information type is not supported by the SCI implementation.
+ */
+ SCI_FAILURE_UNSUPPORTED_INFORMATION_TYPE,
+
+ /**
+ * This member indicates the calling function failed, because the
+ * device already exists.
+ */
+ SCI_FAILURE_DEVICE_EXISTS,
+
+ /**
+ * This member indicates the calling function failed, because adding
+ * a phy to the object is not possible.
+ */
+ SCI_FAILURE_ADDING_PHY_UNSUPPORTED,
+
+ /**
+ * This member indicates the calling function failed, because the
+ * requested information type is not supported by the SCI implementation.
+ */
+ SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD,
+
+ /**
+ * This member indicates the calling function failed, because the SCI
+ * implementation does not support the supplied time limit.
+ */
+ SCI_FAILURE_UNSUPPORTED_TIME_LIMIT,
+
+ /**
+ * This member indicates the calling method failed, because the SCI
+ * implementation does not contain the specified Phy.
+ */
+ SCI_FAILURE_INVALID_PHY,
+
+ /**
+ * This member indicates the calling method failed, because the SCI
+ * implementation does not contain the specified Port.
+ */
+ SCI_FAILURE_INVALID_PORT,
+
+ /**
+ * This member indicates the calling method was partly successful
+ * The port was reset but not all phys in port are operational
+ */
+ SCI_FAILURE_RESET_PORT_PARTIAL_SUCCESS,
+
+ /**
+ * This member indicates that calling method failed
+ * The port reset did not complete because none of the phys are operational
+ */
+ SCI_FAILURE_RESET_PORT_FAILURE,
+
+ /**
+ * This member indicates the calling method failed, because the SCI
+ * implementation does not contain the specified remote device.
+ */
+ SCI_FAILURE_INVALID_REMOTE_DEVICE,
+
+ /**
+ * This member indicates the calling method failed, because the remote
+ * device is in a bad state and requires a reset.
+ */
+ SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED,
+
+ /**
+ * This member indicates the calling method failed, because the SCI
+ * implementation does not contain or support the specified IO tag.
+ */
+ SCI_FAILURE_INVALID_IO_TAG,
+
+ /**
+ * This member indicates that the operation failed and the user should
+ * check the response data associated with the IO.
+ */
+ SCI_FAILURE_IO_RESPONSE_VALID,
+
+ /**
+ * This member indicates that the operation failed, the failure is
+ * controller implementation specific, and the response data associated
+ * with the request is not valid. You can query for the controller
+ * specific error information via sci_controller_get_request_status()
+ */
+ SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR,
+
+ /**
+ * This member indicated that the operation failed because the
+ * user requested this IO to be terminated.
+ */
+ SCI_FAILURE_IO_TERMINATED,
+
+ /**
+ * This member indicates that the operation failed and the associated
+ * request requires a SCSI abort task to be sent to the target.
+ */
+ SCI_FAILURE_IO_REQUIRES_SCSI_ABORT,
+
+ /**
+ * This member indicates that the operation failed because the supplied
+ * device could not be located.
+ */
+ SCI_FAILURE_DEVICE_NOT_FOUND,
+
+ /**
+ * This member indicates that the operation failed because the
+ * objects association is required and is not correctly set.
+ */
+ SCI_FAILURE_INVALID_ASSOCIATION,
+
+ /**
+ * This member indicates that the operation failed, because a timeout
+ * occurred.
+ */
+ SCI_FAILURE_TIMEOUT,
+
+ /**
+ * This member indicates that the operation failed, because the user
+ * specified a value that is either invalid or not supported.
+ */
+ SCI_FAILURE_INVALID_PARAMETER_VALUE,
+
+ /**
+ * This value indicates that the operation failed, because the number
+ * of messages (MSI-X) is not supported.
+ */
+ SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT,
+
+ /**
+ * This value indicates that the method failed due to a lack of
+ * available NCQ tags.
+ */
+ SCI_FAILURE_NO_NCQ_TAG_AVAILABLE,
+
+ /**
+ * This value indicates that a protocol violation has occurred on the
+ * link.
+ */
+ SCI_FAILURE_PROTOCOL_VIOLATION,
+
+ /**
+ * This value indicates a failure condition that retry may help to clear.
+ */
+ SCI_FAILURE_RETRY_REQUIRED,
+
+ /**
+ * This field indicates the retry limit was reached when a retry is attempted
+ */
+ SCI_FAILURE_RETRY_LIMIT_REACHED,
+
+ /**
+ * This member indicates the calling method was partly successful.
+ * Mostly, this status is used when a LUN_RESET issued to an expander attached
+ * STP device in READY NCQ substate needs to have RNC suspended/resumed
+ * before posting TC.
+ */
+ SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS,
+
+ /**
+ * This field indicates an illegal phy connection based on the routing attribute
+ * of both expander phy attached to each other.
+ */
+ SCI_FAILURE_ILLEGAL_ROUTING_ATTRIBUTE_CONFIGURATION,
+
+ /**
+ * This field indicates a CONFIG ROUTE INFO command has a response with function result
+ * INDEX DOES NOT EXIST, usually means exceeding max route index.
+ */
+ SCI_FAILURE_EXCEED_MAX_ROUTE_INDEX,
+
+ /**
+ * This value indicates that an unsupported PCI device ID has been
+ * specified. This indicates that attempts to invoke
+ * sci_library_allocate_controller() will fail.
+ */
+ SCI_FAILURE_UNSUPPORTED_PCI_DEVICE_ID
+
+};
+
+/**
+ * enum sci_io_status - This enumeration depicts all of the possible IO
+ * completion status values. Each value in this enumeration maps directly
+ * to a value in the enum sci_status enumeration. Please refer to that
+ * enumeration for detailed comments concerning what the status represents.
+ *
+ * Add the API to retrieve the SCU status from the core. Check to see that the
+ * following status are properly handled: - SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL
+ * - SCI_IO_FAILURE_INVALID_IO_TAG
+ */
+enum sci_io_status {
+ SCI_IO_SUCCESS = SCI_SUCCESS,
+ SCI_IO_FAILURE = SCI_FAILURE,
+ SCI_IO_SUCCESS_COMPLETE_BEFORE_START = SCI_SUCCESS_IO_COMPLETE_BEFORE_START,
+ SCI_IO_SUCCESS_IO_DONE_EARLY = SCI_SUCCESS_IO_DONE_EARLY,
+ SCI_IO_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE,
+ SCI_IO_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES,
+ SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL,
+ SCI_IO_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID,
+ SCI_IO_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR,
+ SCI_IO_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED,
+ SCI_IO_FAILURE_REQUIRES_SCSI_ABORT = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT,
+ SCI_IO_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE,
+ SCI_IO_FAILURE_NO_NCQ_TAG_AVAILABLE = SCI_FAILURE_NO_NCQ_TAG_AVAILABLE,
+ SCI_IO_FAILURE_PROTOCOL_VIOLATION = SCI_FAILURE_PROTOCOL_VIOLATION,
+
+ SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED,
+
+ SCI_IO_FAILURE_RETRY_REQUIRED = SCI_FAILURE_RETRY_REQUIRED,
+ SCI_IO_FAILURE_RETRY_LIMIT_REACHED = SCI_FAILURE_RETRY_LIMIT_REACHED,
+ SCI_IO_FAILURE_INVALID_REMOTE_DEVICE = SCI_FAILURE_INVALID_REMOTE_DEVICE
+};
+
+/**
+ * enum sci_task_status - This enumeration depicts all of the possible task
+ * completion status values. Each value in this enumeration maps directly
+ * to a value in the enum sci_status enumeration. Please refer to that
+ * enumeration for detailed comments concerning what the status represents.
+ *
+ * Check to see that the following status are properly handled:
+ */
+enum sci_task_status {
+ SCI_TASK_SUCCESS = SCI_SUCCESS,
+ SCI_TASK_FAILURE = SCI_FAILURE,
+ SCI_TASK_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE,
+ SCI_TASK_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES,
+ SCI_TASK_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL,
+ SCI_TASK_FAILURE_INVALID_TAG = SCI_FAILURE_INVALID_IO_TAG,
+ SCI_TASK_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID,
+ SCI_TASK_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR,
+ SCI_TASK_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED,
+ SCI_TASK_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE,
+
+ SCI_TASK_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED,
+ SCI_TASK_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS = SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS
+
+};
+
+/**
+ * sci_swab32_cpy - convert between scsi and scu-hardware byte format
+ * @dest: receive the 4-byte endian swapped version of src
+ * @src: word aligned source buffer
+ *
+ * scu hardware handles SSP/SMP control, response, and unidentified
+ * frames in "big endian dword" order. Regardless of host endian this
+ * is always a swab32()-per-dword conversion of the standard definition,
+ * i.e. single byte fields swapped and multi-byte fields in little-
+ * endian
+ */
+static inline void sci_swab32_cpy(void *_dest, void *_src, ssize_t word_cnt)
+{
+ u32 *dest = _dest, *src = _src;
+
+ while (--word_cnt >= 0)
+ dest[word_cnt] = swab32(src[word_cnt]);
+}
+
+extern unsigned char no_outbound_task_to;
+extern u16 ssp_max_occ_to;
+extern u16 stp_max_occ_to;
+extern u16 ssp_inactive_to;
+extern u16 stp_inactive_to;
+extern unsigned char phy_gen;
+extern unsigned char max_concurr_spinup;
+
+irqreturn_t isci_msix_isr(int vec, void *data);
+irqreturn_t isci_intx_isr(int vec, void *data);
+irqreturn_t isci_error_isr(int vec, void *data);
+
+/*
+ * Each timer is associated with a cancellation flag that is set when
+ * del_timer() is called and checked in the timer callback function. This
+ * is needed since del_timer_sync() cannot be called with sci_lock held.
+ * For deinit however, del_timer_sync() is used without holding the lock.
+ */
+struct sci_timer {
+ struct timer_list timer;
+ bool cancel;
+};
+
+static inline
+void sci_init_timer(struct sci_timer *tmr, void (*fn)(unsigned long))
+{
+ tmr->timer.function = fn;
+ tmr->timer.data = (unsigned long) tmr;
+ tmr->cancel = 0;
+ init_timer(&tmr->timer);
+}
+
+static inline void sci_mod_timer(struct sci_timer *tmr, unsigned long msec)
+{
+ tmr->cancel = 0;
+ mod_timer(&tmr->timer, jiffies + msecs_to_jiffies(msec));
+}
+
+static inline void sci_del_timer(struct sci_timer *tmr)
+{
+ tmr->cancel = 1;
+ del_timer(&tmr->timer);
+}
+
+struct sci_base_state_machine {
+ const struct sci_base_state *state_table;
+ u32 initial_state_id;
+ u32 current_state_id;
+ u32 previous_state_id;
+};
+
+typedef void (*sci_state_transition_t)(struct sci_base_state_machine *sm);
+
+struct sci_base_state {
+ sci_state_transition_t enter_state; /* Called on state entry */
+ sci_state_transition_t exit_state; /* Called on state exit */
+};
+
+extern void sci_init_sm(struct sci_base_state_machine *sm,
+ const struct sci_base_state *state_table,
+ u32 initial_state);
+extern void sci_change_state(struct sci_base_state_machine *sm, u32 next_state);
+#endif /* __ISCI_H__ */
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
new file mode 100644
index 0000000..79313a7
--- /dev/null
+++ b/drivers/scsi/isci/phy.c
@@ -0,0 +1,1312 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "isci.h"
+#include "host.h"
+#include "phy.h"
+#include "scu_event_codes.h"
+#include "probe_roms.h"
+
+/* Maximum arbitration wait time in micro-seconds */
+#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700)
+
+enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy)
+{
+ return iphy->max_negotiated_speed;
+}
+
+static enum sci_status
+sci_phy_transport_layer_initialization(struct isci_phy *iphy,
+ struct scu_transport_layer_registers __iomem *reg)
+{
+ u32 tl_control;
+
+ iphy->transport_layer_registers = reg;
+
+ writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX,
+ &iphy->transport_layer_registers->stp_rni);
+
+ /*
+ * Hardware team recommends that we enable the STP prefetch for all
+ * transports
+ */
+ tl_control = readl(&iphy->transport_layer_registers->control);
+ tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH);
+ writel(tl_control, &iphy->transport_layer_registers->control);
+
+ return SCI_SUCCESS;
+}
+
+static enum sci_status
+sci_phy_link_layer_initialization(struct isci_phy *iphy,
+ struct scu_link_layer_registers __iomem *reg)
+{
+ struct isci_host *ihost = iphy->owning_port->owning_controller;
+ int phy_idx = iphy->phy_index;
+ struct sci_phy_user_params *phy_user = &ihost->user_parameters.phys[phy_idx];
+ struct sci_phy_oem_params *phy_oem =
+ &ihost->oem_parameters.phys[phy_idx];
+ u32 phy_configuration;
+ struct sci_phy_cap phy_cap;
+ u32 parity_check = 0;
+ u32 parity_count = 0;
+ u32 llctl, link_rate;
+ u32 clksm_value = 0;
+
+ iphy->link_layer_registers = reg;
+
+ /* Set our IDENTIFY frame data */
+ #define SCI_END_DEVICE 0x01
+
+ writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) |
+ SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) |
+ SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) |
+ SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) |
+ SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE),
+ &iphy->link_layer_registers->transmit_identification);
+
+ /* Write the device SAS Address */
+ writel(0xFEDCBA98,
+ &iphy->link_layer_registers->sas_device_name_high);
+ writel(phy_idx, &iphy->link_layer_registers->sas_device_name_low);
+
+ /* Write the source SAS Address */
+ writel(phy_oem->sas_address.high,
+ &iphy->link_layer_registers->source_sas_address_high);
+ writel(phy_oem->sas_address.low,
+ &iphy->link_layer_registers->source_sas_address_low);
+
+ /* Clear and Set the PHY Identifier */
+ writel(0, &iphy->link_layer_registers->identify_frame_phy_id);
+ writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx),
+ &iphy->link_layer_registers->identify_frame_phy_id);
+
+ /* Change the initial state of the phy configuration register */
+ phy_configuration =
+ readl(&iphy->link_layer_registers->phy_configuration);
+
+ /* Hold OOB state machine in reset */
+ phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
+ writel(phy_configuration,
+ &iphy->link_layer_registers->phy_configuration);
+
+ /* Configure the SNW capabilities */
+ phy_cap.all = 0;
+ phy_cap.start = 1;
+ phy_cap.gen3_no_ssc = 1;
+ phy_cap.gen2_no_ssc = 1;
+ phy_cap.gen1_no_ssc = 1;
+ if (ihost->oem_parameters.controller.do_enable_ssc == true) {
+ phy_cap.gen3_ssc = 1;
+ phy_cap.gen2_ssc = 1;
+ phy_cap.gen1_ssc = 1;
+ }
+
+ /*
+ * The SAS specification indicates that the phy_capabilities that
+ * are transmitted shall have an even parity. Calculate the parity. */
+ parity_check = phy_cap.all;
+ while (parity_check != 0) {
+ if (parity_check & 0x1)
+ parity_count++;
+ parity_check >>= 1;
+ }
+
+ /*
+ * If parity indicates there are an odd number of bits set, then
+ * set the parity bit to 1 in the phy capabilities. */
+ if ((parity_count % 2) != 0)
+ phy_cap.parity = 1;
+
+ writel(phy_cap.all, &iphy->link_layer_registers->phy_capabilities);
+
+ /* Set the enable spinup period but disable the ability to send
+ * notify enable spinup
+ */
+ writel(SCU_ENSPINUP_GEN_VAL(COUNT,
+ phy_user->notify_enable_spin_up_insertion_frequency),
+ &iphy->link_layer_registers->notify_enable_spinup_control);
+
+ /* Write the ALIGN Insertion Ferequency for connected phy and
+ * inpendent of connected state
+ */
+ clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED,
+ phy_user->in_connection_align_insertion_frequency);
+
+ clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL,
+ phy_user->align_insertion_frequency);
+
+ writel(clksm_value, &iphy->link_layer_registers->clock_skew_management);
+
+ /* @todo Provide a way to write this register correctly */
+ writel(0x02108421,
+ &iphy->link_layer_registers->afe_lookup_table_control);
+
+ llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT,
+ (u8)ihost->user_parameters.no_outbound_task_timeout);
+
+ switch (phy_user->max_speed_generation) {
+ case SCIC_SDS_PARM_GEN3_SPEED:
+ link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3;
+ break;
+ case SCIC_SDS_PARM_GEN2_SPEED:
+ link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2;
+ break;
+ default:
+ link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1;
+ break;
+ }
+ llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
+ writel(llctl, &iphy->link_layer_registers->link_layer_control);
+
+ if (is_a2(ihost->pdev)) {
+ /* Program the max ARB time for the PHY to 700us so we inter-operate with
+ * the PMC expander which shuts down PHYs if the expander PHY generates too
+ * many breaks. This time value will guarantee that the initiator PHY will
+ * generate the break.
+ */
+ writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME,
+ &iphy->link_layer_registers->maximum_arbitration_wait_timer_timeout);
+ }
+
+ /* Disable link layer hang detection, rely on the OS timeout for I/O timeouts. */
+ writel(0, &iphy->link_layer_registers->link_layer_hang_detection_timeout);
+
+ /* We can exit the initial state to the stopped state */
+ sci_change_state(&iphy->sm, SCI_PHY_STOPPED);
+
+ return SCI_SUCCESS;
+}
+
+static void phy_sata_timeout(unsigned long data)
+{
+ struct sci_timer *tmr = (struct sci_timer *)data;
+ struct isci_phy *iphy = container_of(tmr, typeof(*iphy), sata_timer);
+ struct isci_host *ihost = iphy->owning_port->owning_controller;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (tmr->cancel)
+ goto done;
+
+ dev_dbg(sciphy_to_dev(iphy),
+ "%s: SCIC SDS Phy 0x%p did not receive signature fis before "
+ "timeout.\n",
+ __func__,
+ iphy);
+
+ sci_change_state(&iphy->sm, SCI_PHY_STARTING);
+done:
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
+
+/**
+ * This method returns the port currently containing this phy. If the phy is
+ * currently contained by the dummy port, then the phy is considered to not
+ * be part of a port.
+ * @sci_phy: This parameter specifies the phy for which to retrieve the
+ * containing port.
+ *
+ * This method returns a handle to a port that contains the supplied phy.
+ * NULL This value is returned if the phy is not part of a real
+ * port (i.e. it's contained in the dummy port). !NULL All other
+ * values indicate a handle/pointer to the port containing the phy.
+ */
+struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy)
+{
+ struct isci_port *iport = iphy->owning_port;
+
+ if (iport->physical_port_index == SCIC_SDS_DUMMY_PORT)
+ return NULL;
+
+ return iphy->owning_port;
+}
+
+/**
+ * This method will assign a port to the phy object.
+ * @out]: iphy This parameter specifies the phy for which to assign a port
+ * object.
+ *
+ *
+ */
+void sci_phy_set_port(
+ struct isci_phy *iphy,
+ struct isci_port *iport)
+{
+ iphy->owning_port = iport;
+
+ if (iphy->bcn_received_while_port_unassigned) {
+ iphy->bcn_received_while_port_unassigned = false;
+ sci_port_broadcast_change_received(iphy->owning_port, iphy);
+ }
+}
+
+enum sci_status sci_phy_initialize(struct isci_phy *iphy,
+ struct scu_transport_layer_registers __iomem *tl,
+ struct scu_link_layer_registers __iomem *ll)
+{
+ /* Perfrom the initialization of the TL hardware */
+ sci_phy_transport_layer_initialization(iphy, tl);
+
+ /* Perofrm the initialization of the PE hardware */
+ sci_phy_link_layer_initialization(iphy, ll);
+
+ /* There is nothing that needs to be done in this state just
+ * transition to the stopped state
+ */
+ sci_change_state(&iphy->sm, SCI_PHY_STOPPED);
+
+ return SCI_SUCCESS;
+}
+
+/**
+ * This method assigns the direct attached device ID for this phy.
+ *
+ * @iphy The phy for which the direct attached device id is to
+ * be assigned.
+ * @device_id The direct attached device ID to assign to the phy.
+ * This will either be the RNi for the device or an invalid RNi if there
+ * is no current device assigned to the phy.
+ */
+void sci_phy_setup_transport(struct isci_phy *iphy, u32 device_id)
+{
+ u32 tl_control;
+
+ writel(device_id, &iphy->transport_layer_registers->stp_rni);
+
+ /*
+ * The read should guarantee that the first write gets posted
+ * before the next write
+ */
+ tl_control = readl(&iphy->transport_layer_registers->control);
+ tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE);
+ writel(tl_control, &iphy->transport_layer_registers->control);
+}
+
+static void sci_phy_suspend(struct isci_phy *iphy)
+{
+ u32 scu_sas_pcfg_value;
+
+ scu_sas_pcfg_value =
+ readl(&iphy->link_layer_registers->phy_configuration);
+ scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
+ writel(scu_sas_pcfg_value,
+ &iphy->link_layer_registers->phy_configuration);
+
+ sci_phy_setup_transport(iphy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX);
+}
+
+void sci_phy_resume(struct isci_phy *iphy)
+{
+ u32 scu_sas_pcfg_value;
+
+ scu_sas_pcfg_value =
+ readl(&iphy->link_layer_registers->phy_configuration);
+ scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
+ writel(scu_sas_pcfg_value,
+ &iphy->link_layer_registers->phy_configuration);
+}
+
+void sci_phy_get_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas)
+{
+ sas->high = readl(&iphy->link_layer_registers->source_sas_address_high);
+ sas->low = readl(&iphy->link_layer_registers->source_sas_address_low);
+}
+
+void sci_phy_get_attached_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas)
+{
+ struct sas_identify_frame *iaf;
+
+ iaf = &iphy->frame_rcvd.iaf;
+ memcpy(sas, iaf->sas_addr, SAS_ADDR_SIZE);
+}
+
+void sci_phy_get_protocols(struct isci_phy *iphy, struct sci_phy_proto *proto)
+{
+ proto->all = readl(&iphy->link_layer_registers->transmit_identification);
+}
+
+enum sci_status sci_phy_start(struct isci_phy *iphy)
+{
+ enum sci_phy_states state = iphy->sm.current_state_id;
+
+ if (state != SCI_PHY_STOPPED) {
+ dev_dbg(sciphy_to_dev(iphy),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ sci_change_state(&iphy->sm, SCI_PHY_STARTING);
+ return SCI_SUCCESS;
+}
+
+enum sci_status sci_phy_stop(struct isci_phy *iphy)
+{
+ enum sci_phy_states state = iphy->sm.current_state_id;
+
+ switch (state) {
+ case SCI_PHY_SUB_INITIAL:
+ case SCI_PHY_SUB_AWAIT_OSSP_EN:
+ case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN:
+ case SCI_PHY_SUB_AWAIT_SAS_POWER:
+ case SCI_PHY_SUB_AWAIT_SATA_POWER:
+ case SCI_PHY_SUB_AWAIT_SATA_PHY_EN:
+ case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
+ case SCI_PHY_SUB_AWAIT_SIG_FIS_UF:
+ case SCI_PHY_SUB_FINAL:
+ case SCI_PHY_READY:
+ break;
+ default:
+ dev_dbg(sciphy_to_dev(iphy),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ sci_change_state(&iphy->sm, SCI_PHY_STOPPED);
+ return SCI_SUCCESS;
+}
+
+enum sci_status sci_phy_reset(struct isci_phy *iphy)
+{
+ enum sci_phy_states state = iphy->sm.current_state_id;
+
+ if (state != SCI_PHY_READY) {
+ dev_dbg(sciphy_to_dev(iphy),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ sci_change_state(&iphy->sm, SCI_PHY_RESETTING);
+ return SCI_SUCCESS;
+}
+
+enum sci_status sci_phy_consume_power_handler(struct isci_phy *iphy)
+{
+ enum sci_phy_states state = iphy->sm.current_state_id;
+
+ switch (state) {
+ case SCI_PHY_SUB_AWAIT_SAS_POWER: {
+ u32 enable_spinup;
+
+ enable_spinup = readl(&iphy->link_layer_registers->notify_enable_spinup_control);
+ enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE);
+ writel(enable_spinup, &iphy->link_layer_registers->notify_enable_spinup_control);
+
+ /* Change state to the final state this substate machine has run to completion */
+ sci_change_state(&iphy->sm, SCI_PHY_SUB_FINAL);
+
+ return SCI_SUCCESS;
+ }
+ case SCI_PHY_SUB_AWAIT_SATA_POWER: {
+ u32 scu_sas_pcfg_value;
+
+ /* Release the spinup hold state and reset the OOB state machine */
+ scu_sas_pcfg_value =
+ readl(&iphy->link_layer_registers->phy_configuration);
+ scu_sas_pcfg_value &=
+ ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE));
+ scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
+ writel(scu_sas_pcfg_value,
+ &iphy->link_layer_registers->phy_configuration);
+
+ /* Now restart the OOB operation */
+ scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
+ scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
+ writel(scu_sas_pcfg_value,
+ &iphy->link_layer_registers->phy_configuration);
+
+ /* Change state to the final state this substate machine has run to completion */
+ sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_PHY_EN);
+
+ return SCI_SUCCESS;
+ }
+ default:
+ dev_dbg(sciphy_to_dev(iphy),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+static void sci_phy_start_sas_link_training(struct isci_phy *iphy)
+{
+ /* continue the link training for the phy as if it were a SAS PHY
+ * instead of a SATA PHY. This is done because the completion queue had a SAS
+ * PHY DETECTED event when the state machine was expecting a SATA PHY event.
+ */
+ u32 phy_control;
+
+ phy_control = readl(&iphy->link_layer_registers->phy_configuration);
+ phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD);
+ writel(phy_control,
+ &iphy->link_layer_registers->phy_configuration);
+
+ sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SAS_SPEED_EN);
+
+ iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS;
+}
+
+static void sci_phy_start_sata_link_training(struct isci_phy *iphy)
+{
+ /* This method continues the link training for the phy as if it were a SATA PHY
+ * instead of a SAS PHY. This is done because the completion queue had a SATA
+ * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none
+ */
+ sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_POWER);
+
+ iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA;
+}
+
+/**
+ * sci_phy_complete_link_training - perform processing common to
+ * all protocols upon completion of link training.
+ * @sci_phy: This parameter specifies the phy object for which link training
+ * has completed.
+ * @max_link_rate: This parameter specifies the maximum link rate to be
+ * associated with this phy.
+ * @next_state: This parameter specifies the next state for the phy's starting
+ * sub-state machine.
+ *
+ */
+static void sci_phy_complete_link_training(struct isci_phy *iphy,
+ enum sas_linkrate max_link_rate,
+ u32 next_state)
+{
+ iphy->max_negotiated_speed = max_link_rate;
+
+ sci_change_state(&iphy->sm, next_state);
+}
+
+enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code)
+{
+ enum sci_phy_states state = iphy->sm.current_state_id;
+
+ switch (state) {
+ case SCI_PHY_SUB_AWAIT_OSSP_EN:
+ switch (scu_get_event_code(event_code)) {
+ case SCU_EVENT_SAS_PHY_DETECTED:
+ sci_phy_start_sas_link_training(iphy);
+ iphy->is_in_link_training = true;
+ break;
+ case SCU_EVENT_SATA_SPINUP_HOLD:
+ sci_phy_start_sata_link_training(iphy);
+ iphy->is_in_link_training = true;
+ break;
+ default:
+ dev_dbg(sciphy_to_dev(iphy),
+ "%s: PHY starting substate machine received "
+ "unexpected event_code %x\n",
+ __func__,
+ event_code);
+ return SCI_FAILURE;
+ }
+ return SCI_SUCCESS;
+ case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN:
+ switch (scu_get_event_code(event_code)) {
+ case SCU_EVENT_SAS_PHY_DETECTED:
+ /*
+ * Why is this being reported again by the controller?
+ * We would re-enter this state so just stay here */
+ break;
+ case SCU_EVENT_SAS_15:
+ case SCU_EVENT_SAS_15_SSC:
+ sci_phy_complete_link_training(iphy, SAS_LINK_RATE_1_5_GBPS,
+ SCI_PHY_SUB_AWAIT_IAF_UF);
+ break;
+ case SCU_EVENT_SAS_30:
+ case SCU_EVENT_SAS_30_SSC:
+ sci_phy_complete_link_training(iphy, SAS_LINK_RATE_3_0_GBPS,
+ SCI_PHY_SUB_AWAIT_IAF_UF);
+ break;
+ case SCU_EVENT_SAS_60:
+ case SCU_EVENT_SAS_60_SSC:
+ sci_phy_complete_link_training(iphy, SAS_LINK_RATE_6_0_GBPS,
+ SCI_PHY_SUB_AWAIT_IAF_UF);
+ break;
+ case SCU_EVENT_SATA_SPINUP_HOLD:
+ /*
+ * We were doing SAS PHY link training and received a SATA PHY event
+ * continue OOB/SN as if this were a SATA PHY */
+ sci_phy_start_sata_link_training(iphy);
+ break;
+ case SCU_EVENT_LINK_FAILURE:
+ /* Link failure change state back to the starting state */
+ sci_change_state(&iphy->sm, SCI_PHY_STARTING);
+ break;
+ default:
+ dev_warn(sciphy_to_dev(iphy),
+ "%s: PHY starting substate machine received "
+ "unexpected event_code %x\n",
+ __func__, event_code);
+
+ return SCI_FAILURE;
+ break;
+ }
+ return SCI_SUCCESS;
+ case SCI_PHY_SUB_AWAIT_IAF_UF:
+ switch (scu_get_event_code(event_code)) {
+ case SCU_EVENT_SAS_PHY_DETECTED:
+ /* Backup the state machine */
+ sci_phy_start_sas_link_training(iphy);
+ break;
+ case SCU_EVENT_SATA_SPINUP_HOLD:
+ /* We were doing SAS PHY link training and received a
+ * SATA PHY event continue OOB/SN as if this were a
+ * SATA PHY
+ */
+ sci_phy_start_sata_link_training(iphy);
+ break;
+ case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT:
+ case SCU_EVENT_LINK_FAILURE:
+ case SCU_EVENT_HARD_RESET_RECEIVED:
+ /* Start the oob/sn state machine over again */
+ sci_change_state(&iphy->sm, SCI_PHY_STARTING);
+ break;
+ default:
+ dev_warn(sciphy_to_dev(iphy),
+ "%s: PHY starting substate machine received "
+ "unexpected event_code %x\n",
+ __func__, event_code);
+ return SCI_FAILURE;
+ }
+ return SCI_SUCCESS;
+ case SCI_PHY_SUB_AWAIT_SAS_POWER:
+ switch (scu_get_event_code(event_code)) {
+ case SCU_EVENT_LINK_FAILURE:
+ /* Link failure change state back to the starting state */
+ sci_change_state(&iphy->sm, SCI_PHY_STARTING);
+ break;
+ default:
+ dev_warn(sciphy_to_dev(iphy),
+ "%s: PHY starting substate machine received unexpected "
+ "event_code %x\n",
+ __func__,
+ event_code);
+ return SCI_FAILURE;
+ }
+ return SCI_SUCCESS;
+ case SCI_PHY_SUB_AWAIT_SATA_POWER:
+ switch (scu_get_event_code(event_code)) {
+ case SCU_EVENT_LINK_FAILURE:
+ /* Link failure change state back to the starting state */
+ sci_change_state(&iphy->sm, SCI_PHY_STARTING);
+ break;
+ case SCU_EVENT_SATA_SPINUP_HOLD:
+ /* These events are received every 10ms and are
+ * expected while in this state
+ */
+ break;
+
+ case SCU_EVENT_SAS_PHY_DETECTED:
+ /* There has been a change in the phy type before OOB/SN for the
+ * SATA finished start down the SAS link traning path.
+ */
+ sci_phy_start_sas_link_training(iphy);
+ break;
+
+ default:
+ dev_warn(sciphy_to_dev(iphy),
+ "%s: PHY starting substate machine received "
+ "unexpected event_code %x\n",
+ __func__, event_code);
+
+ return SCI_FAILURE;
+ }
+ return SCI_SUCCESS;
+ case SCI_PHY_SUB_AWAIT_SATA_PHY_EN:
+ switch (scu_get_event_code(event_code)) {
+ case SCU_EVENT_LINK_FAILURE:
+ /* Link failure change state back to the starting state */
+ sci_change_state(&iphy->sm, SCI_PHY_STARTING);
+ break;
+ case SCU_EVENT_SATA_SPINUP_HOLD:
+ /* These events might be received since we dont know how many may be in
+ * the completion queue while waiting for power
+ */
+ break;
+ case SCU_EVENT_SATA_PHY_DETECTED:
+ iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA;
+
+ /* We have received the SATA PHY notification change state */
+ sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN);
+ break;
+ case SCU_EVENT_SAS_PHY_DETECTED:
+ /* There has been a change in the phy type before OOB/SN for the
+ * SATA finished start down the SAS link traning path.
+ */
+ sci_phy_start_sas_link_training(iphy);
+ break;
+ default:
+ dev_warn(sciphy_to_dev(iphy),
+ "%s: PHY starting substate machine received "
+ "unexpected event_code %x\n",
+ __func__,
+ event_code);
+
+ return SCI_FAILURE;;
+ }
+ return SCI_SUCCESS;
+ case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
+ switch (scu_get_event_code(event_code)) {
+ case SCU_EVENT_SATA_PHY_DETECTED:
+ /*
+ * The hardware reports multiple SATA PHY detected events
+ * ignore the extras */
+ break;
+ case SCU_EVENT_SATA_15:
+ case SCU_EVENT_SATA_15_SSC:
+ sci_phy_complete_link_training(iphy, SAS_LINK_RATE_1_5_GBPS,
+ SCI_PHY_SUB_AWAIT_SIG_FIS_UF);
+ break;
+ case SCU_EVENT_SATA_30:
+ case SCU_EVENT_SATA_30_SSC:
+ sci_phy_complete_link_training(iphy, SAS_LINK_RATE_3_0_GBPS,
+ SCI_PHY_SUB_AWAIT_SIG_FIS_UF);
+ break;
+ case SCU_EVENT_SATA_60:
+ case SCU_EVENT_SATA_60_SSC:
+ sci_phy_complete_link_training(iphy, SAS_LINK_RATE_6_0_GBPS,
+ SCI_PHY_SUB_AWAIT_SIG_FIS_UF);
+ break;
+ case SCU_EVENT_LINK_FAILURE:
+ /* Link failure change state back to the starting state */
+ sci_change_state(&iphy->sm, SCI_PHY_STARTING);
+ break;
+ case SCU_EVENT_SAS_PHY_DETECTED:
+ /*
+ * There has been a change in the phy type before OOB/SN for the
+ * SATA finished start down the SAS link traning path. */
+ sci_phy_start_sas_link_training(iphy);
+ break;
+ default:
+ dev_warn(sciphy_to_dev(iphy),
+ "%s: PHY starting substate machine received "
+ "unexpected event_code %x\n",
+ __func__, event_code);
+
+ return SCI_FAILURE;
+ }
+
+ return SCI_SUCCESS;
+ case SCI_PHY_SUB_AWAIT_SIG_FIS_UF:
+ switch (scu_get_event_code(event_code)) {
+ case SCU_EVENT_SATA_PHY_DETECTED:
+ /* Backup the state machine */
+ sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN);
+ break;
+
+ case SCU_EVENT_LINK_FAILURE:
+ /* Link failure change state back to the starting state */
+ sci_change_state(&iphy->sm, SCI_PHY_STARTING);
+ break;
+
+ default:
+ dev_warn(sciphy_to_dev(iphy),
+ "%s: PHY starting substate machine received "
+ "unexpected event_code %x\n",
+ __func__,
+ event_code);
+
+ return SCI_FAILURE;
+ }
+ return SCI_SUCCESS;
+ case SCI_PHY_READY:
+ switch (scu_get_event_code(event_code)) {
+ case SCU_EVENT_LINK_FAILURE:
+ /* Link failure change state back to the starting state */
+ sci_change_state(&iphy->sm, SCI_PHY_STARTING);
+ break;
+ case SCU_EVENT_BROADCAST_CHANGE:
+ /* Broadcast change received. Notify the port. */
+ if (phy_get_non_dummy_port(iphy) != NULL)
+ sci_port_broadcast_change_received(iphy->owning_port, iphy);
+ else
+ iphy->bcn_received_while_port_unassigned = true;
+ break;
+ default:
+ dev_warn(sciphy_to_dev(iphy),
+ "%sP SCIC PHY 0x%p ready state machine received "
+ "unexpected event_code %x\n",
+ __func__, iphy, event_code);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+ return SCI_SUCCESS;
+ case SCI_PHY_RESETTING:
+ switch (scu_get_event_code(event_code)) {
+ case SCU_EVENT_HARD_RESET_TRANSMITTED:
+ /* Link failure change state back to the starting state */
+ sci_change_state(&iphy->sm, SCI_PHY_STARTING);
+ break;
+ default:
+ dev_warn(sciphy_to_dev(iphy),
+ "%s: SCIC PHY 0x%p resetting state machine received "
+ "unexpected event_code %x\n",
+ __func__, iphy, event_code);
+
+ return SCI_FAILURE_INVALID_STATE;
+ break;
+ }
+ return SCI_SUCCESS;
+ default:
+ dev_dbg(sciphy_to_dev(iphy),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+enum sci_status sci_phy_frame_handler(struct isci_phy *iphy, u32 frame_index)
+{
+ enum sci_phy_states state = iphy->sm.current_state_id;
+ struct isci_host *ihost = iphy->owning_port->owning_controller;
+ enum sci_status result;
+ unsigned long flags;
+
+ switch (state) {
+ case SCI_PHY_SUB_AWAIT_IAF_UF: {
+ u32 *frame_words;
+ struct sas_identify_frame iaf;
+
+ result = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_words);
+
+ if (result != SCI_SUCCESS)
+ return result;
+
+ sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32));
+ if (iaf.frame_type == 0) {
+ u32 state;
+
+ spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf));
+ spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags);
+ if (iaf.smp_tport) {
+ /* We got the IAF for an expander PHY go to the final
+ * state since there are no power requirements for
+ * expander phys.
+ */
+ state = SCI_PHY_SUB_FINAL;
+ } else {
+ /* We got the IAF we can now go to the await spinup
+ * semaphore state
+ */
+ state = SCI_PHY_SUB_AWAIT_SAS_POWER;
+ }
+ sci_change_state(&iphy->sm, state);
+ result = SCI_SUCCESS;
+ } else
+ dev_warn(sciphy_to_dev(iphy),
+ "%s: PHY starting substate machine received "
+ "unexpected frame id %x\n",
+ __func__, frame_index);
+
+ sci_controller_release_frame(ihost, frame_index);
+ return result;
+ }
+ case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: {
+ struct dev_to_host_fis *frame_header;
+ u32 *fis_frame_data;
+
+ result = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_header);
+
+ if (result != SCI_SUCCESS)
+ return result;
+
+ if ((frame_header->fis_type == FIS_REGD2H) &&
+ !(frame_header->status & ATA_BUSY)) {
+ sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
+ frame_index,
+ (void **)&fis_frame_data);
+
+ spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags);
+ sci_controller_copy_sata_response(&iphy->frame_rcvd.fis,
+ frame_header,
+ fis_frame_data);
+ spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags);
+
+ /* got IAF we can now go to the await spinup semaphore state */
+ sci_change_state(&iphy->sm, SCI_PHY_SUB_FINAL);
+
+ result = SCI_SUCCESS;
+ } else
+ dev_warn(sciphy_to_dev(iphy),
+ "%s: PHY starting substate machine received "
+ "unexpected frame id %x\n",
+ __func__, frame_index);
+
+ /* Regardless of the result we are done with this frame with it */
+ sci_controller_release_frame(ihost, frame_index);
+
+ return result;
+ }
+ default:
+ dev_dbg(sciphy_to_dev(iphy),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+}
+
+static void sci_phy_starting_initial_substate_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+
+ /* This is just an temporary state go off to the starting state */
+ sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_OSSP_EN);
+}
+
+static void sci_phy_starting_await_sas_power_substate_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+ struct isci_host *ihost = iphy->owning_port->owning_controller;
+
+ sci_controller_power_control_queue_insert(ihost, iphy);
+}
+
+static void sci_phy_starting_await_sas_power_substate_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+ struct isci_host *ihost = iphy->owning_port->owning_controller;
+
+ sci_controller_power_control_queue_remove(ihost, iphy);
+}
+
+static void sci_phy_starting_await_sata_power_substate_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+ struct isci_host *ihost = iphy->owning_port->owning_controller;
+
+ sci_controller_power_control_queue_insert(ihost, iphy);
+}
+
+static void sci_phy_starting_await_sata_power_substate_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+ struct isci_host *ihost = iphy->owning_port->owning_controller;
+
+ sci_controller_power_control_queue_remove(ihost, iphy);
+}
+
+static void sci_phy_starting_await_sata_phy_substate_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+
+ sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
+}
+
+static void sci_phy_starting_await_sata_phy_substate_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+
+ sci_del_timer(&iphy->sata_timer);
+}
+
+static void sci_phy_starting_await_sata_speed_substate_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+
+ sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT);
+}
+
+static void sci_phy_starting_await_sata_speed_substate_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+
+ sci_del_timer(&iphy->sata_timer);
+}
+
+static void sci_phy_starting_await_sig_fis_uf_substate_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+
+ if (sci_port_link_detected(iphy->owning_port, iphy)) {
+
+ /*
+ * Clear the PE suspend condition so we can actually
+ * receive SIG FIS
+ * The hardware will not respond to the XRDY until the PE
+ * suspend condition is cleared.
+ */
+ sci_phy_resume(iphy);
+
+ sci_mod_timer(&iphy->sata_timer,
+ SCIC_SDS_SIGNATURE_FIS_TIMEOUT);
+ } else
+ iphy->is_in_link_training = false;
+}
+
+static void sci_phy_starting_await_sig_fis_uf_substate_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+
+ sci_del_timer(&iphy->sata_timer);
+}
+
+static void sci_phy_starting_final_substate_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+
+ /* State machine has run to completion so exit out and change
+ * the base state machine to the ready state
+ */
+ sci_change_state(&iphy->sm, SCI_PHY_READY);
+}
+
+/**
+ *
+ * @sci_phy: This is the struct isci_phy object to stop.
+ *
+ * This method will stop the struct isci_phy object. This does not reset the
+ * protocol engine it just suspends it and places it in a state where it will
+ * not cause the end device to power up. none
+ */
+static void scu_link_layer_stop_protocol_engine(
+ struct isci_phy *iphy)
+{
+ u32 scu_sas_pcfg_value;
+ u32 enable_spinup_value;
+
+ /* Suspend the protocol engine and place it in a sata spinup hold state */
+ scu_sas_pcfg_value =
+ readl(&iphy->link_layer_registers->phy_configuration);
+ scu_sas_pcfg_value |=
+ (SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
+ SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) |
+ SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD));
+ writel(scu_sas_pcfg_value,
+ &iphy->link_layer_registers->phy_configuration);
+
+ /* Disable the notify enable spinup primitives */
+ enable_spinup_value = readl(&iphy->link_layer_registers->notify_enable_spinup_control);
+ enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE);
+ writel(enable_spinup_value, &iphy->link_layer_registers->notify_enable_spinup_control);
+}
+
+/**
+ *
+ *
+ * This method will start the OOB/SN state machine for this struct isci_phy object.
+ */
+static void scu_link_layer_start_oob(
+ struct isci_phy *iphy)
+{
+ u32 scu_sas_pcfg_value;
+
+ scu_sas_pcfg_value =
+ readl(&iphy->link_layer_registers->phy_configuration);
+ scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
+ scu_sas_pcfg_value &=
+ ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
+ SCU_SAS_PCFG_GEN_BIT(HARD_RESET));
+ writel(scu_sas_pcfg_value,
+ &iphy->link_layer_registers->phy_configuration);
+}
+
+/**
+ *
+ *
+ * This method will transmit a hard reset request on the specified phy. The SCU
+ * hardware requires that we reset the OOB state machine and set the hard reset
+ * bit in the phy configuration register. We then must start OOB over with the
+ * hard reset bit set.
+ */
+static void scu_link_layer_tx_hard_reset(
+ struct isci_phy *iphy)
+{
+ u32 phy_configuration_value;
+
+ /*
+ * SAS Phys must wait for the HARD_RESET_TX event notification to transition
+ * to the starting state. */
+ phy_configuration_value =
+ readl(&iphy->link_layer_registers->phy_configuration);
+ phy_configuration_value |=
+ (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) |
+ SCU_SAS_PCFG_GEN_BIT(OOB_RESET));
+ writel(phy_configuration_value,
+ &iphy->link_layer_registers->phy_configuration);
+
+ /* Now take the OOB state machine out of reset */
+ phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
+ phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
+ writel(phy_configuration_value,
+ &iphy->link_layer_registers->phy_configuration);
+}
+
+static void sci_phy_stopped_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+ struct isci_port *iport = iphy->owning_port;
+ struct isci_host *ihost = iport->owning_controller;
+
+ /*
+ * @todo We need to get to the controller to place this PE in a
+ * reset state
+ */
+ sci_del_timer(&iphy->sata_timer);
+
+ scu_link_layer_stop_protocol_engine(iphy);
+
+ if (iphy->sm.previous_state_id != SCI_PHY_INITIAL)
+ sci_controller_link_down(ihost, phy_get_non_dummy_port(iphy), iphy);
+}
+
+static void sci_phy_starting_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+ struct isci_port *iport = iphy->owning_port;
+ struct isci_host *ihost = iport->owning_controller;
+
+ scu_link_layer_stop_protocol_engine(iphy);
+ scu_link_layer_start_oob(iphy);
+
+ /* We don't know what kind of phy we are going to be just yet */
+ iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
+ iphy->bcn_received_while_port_unassigned = false;
+
+ if (iphy->sm.previous_state_id == SCI_PHY_READY)
+ sci_controller_link_down(ihost, phy_get_non_dummy_port(iphy), iphy);
+
+ sci_change_state(&iphy->sm, SCI_PHY_SUB_INITIAL);
+}
+
+static void sci_phy_ready_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+ struct isci_port *iport = iphy->owning_port;
+ struct isci_host *ihost = iport->owning_controller;
+
+ sci_controller_link_up(ihost, phy_get_non_dummy_port(iphy), iphy);
+}
+
+static void sci_phy_ready_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+
+ sci_phy_suspend(iphy);
+}
+
+static void sci_phy_resetting_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm);
+
+ /* The phy is being reset, therefore deactivate it from the port. In
+ * the resetting state we don't notify the user regarding link up and
+ * link down notifications
+ */
+ sci_port_deactivate_phy(iphy->owning_port, iphy, false);
+
+ if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
+ scu_link_layer_tx_hard_reset(iphy);
+ } else {
+ /* The SCU does not need to have a discrete reset state so
+ * just go back to the starting state.
+ */
+ sci_change_state(&iphy->sm, SCI_PHY_STARTING);
+ }
+}
+
+static const struct sci_base_state sci_phy_state_table[] = {
+ [SCI_PHY_INITIAL] = { },
+ [SCI_PHY_STOPPED] = {
+ .enter_state = sci_phy_stopped_state_enter,
+ },
+ [SCI_PHY_STARTING] = {
+ .enter_state = sci_phy_starting_state_enter,
+ },
+ [SCI_PHY_SUB_INITIAL] = {
+ .enter_state = sci_phy_starting_initial_substate_enter,
+ },
+ [SCI_PHY_SUB_AWAIT_OSSP_EN] = { },
+ [SCI_PHY_SUB_AWAIT_SAS_SPEED_EN] = { },
+ [SCI_PHY_SUB_AWAIT_IAF_UF] = { },
+ [SCI_PHY_SUB_AWAIT_SAS_POWER] = {
+ .enter_state = sci_phy_starting_await_sas_power_substate_enter,
+ .exit_state = sci_phy_starting_await_sas_power_substate_exit,
+ },
+ [SCI_PHY_SUB_AWAIT_SATA_POWER] = {
+ .enter_state = sci_phy_starting_await_sata_power_substate_enter,
+ .exit_state = sci_phy_starting_await_sata_power_substate_exit
+ },
+ [SCI_PHY_SUB_AWAIT_SATA_PHY_EN] = {
+ .enter_state = sci_phy_starting_await_sata_phy_substate_enter,
+ .exit_state = sci_phy_starting_await_sata_phy_substate_exit
+ },
+ [SCI_PHY_SUB_AWAIT_SATA_SPEED_EN] = {
+ .enter_state = sci_phy_starting_await_sata_speed_substate_enter,
+ .exit_state = sci_phy_starting_await_sata_speed_substate_exit
+ },
+ [SCI_PHY_SUB_AWAIT_SIG_FIS_UF] = {
+ .enter_state = sci_phy_starting_await_sig_fis_uf_substate_enter,
+ .exit_state = sci_phy_starting_await_sig_fis_uf_substate_exit
+ },
+ [SCI_PHY_SUB_FINAL] = {
+ .enter_state = sci_phy_starting_final_substate_enter,
+ },
+ [SCI_PHY_READY] = {
+ .enter_state = sci_phy_ready_state_enter,
+ .exit_state = sci_phy_ready_state_exit,
+ },
+ [SCI_PHY_RESETTING] = {
+ .enter_state = sci_phy_resetting_state_enter,
+ },
+ [SCI_PHY_FINAL] = { },
+};
+
+void sci_phy_construct(struct isci_phy *iphy,
+ struct isci_port *iport, u8 phy_index)
+{
+ sci_init_sm(&iphy->sm, sci_phy_state_table, SCI_PHY_INITIAL);
+
+ /* Copy the rest of the input data to our locals */
+ iphy->owning_port = iport;
+ iphy->phy_index = phy_index;
+ iphy->bcn_received_while_port_unassigned = false;
+ iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN;
+ iphy->link_layer_registers = NULL;
+ iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
+
+ /* Create the SIGNATURE FIS Timeout timer for this phy */
+ sci_init_timer(&iphy->sata_timer, phy_sata_timeout);
+}
+
+void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index)
+{
+ struct sci_oem_params *oem = &ihost->oem_parameters;
+ u64 sci_sas_addr;
+ __be64 sas_addr;
+
+ sci_sas_addr = oem->phys[index].sas_address.high;
+ sci_sas_addr <<= 32;
+ sci_sas_addr |= oem->phys[index].sas_address.low;
+ sas_addr = cpu_to_be64(sci_sas_addr);
+ memcpy(iphy->sas_addr, &sas_addr, sizeof(sas_addr));
+
+ iphy->isci_port = NULL;
+ iphy->sas_phy.enabled = 0;
+ iphy->sas_phy.id = index;
+ iphy->sas_phy.sas_addr = &iphy->sas_addr[0];
+ iphy->sas_phy.frame_rcvd = (u8 *)&iphy->frame_rcvd;
+ iphy->sas_phy.ha = &ihost->sas_ha;
+ iphy->sas_phy.lldd_phy = iphy;
+ iphy->sas_phy.enabled = 1;
+ iphy->sas_phy.class = SAS;
+ iphy->sas_phy.iproto = SAS_PROTOCOL_ALL;
+ iphy->sas_phy.tproto = 0;
+ iphy->sas_phy.type = PHY_TYPE_PHYSICAL;
+ iphy->sas_phy.role = PHY_ROLE_INITIATOR;
+ iphy->sas_phy.oob_mode = OOB_NOT_CONNECTED;
+ iphy->sas_phy.linkrate = SAS_LINK_RATE_UNKNOWN;
+ memset(&iphy->frame_rcvd, 0, sizeof(iphy->frame_rcvd));
+}
+
+
+/**
+ * isci_phy_control() - This function is one of the SAS Domain Template
+ * functions. This is a phy management function.
+ * @phy: This parameter specifies the sphy being controlled.
+ * @func: This parameter specifies the phy control function being invoked.
+ * @buf: This parameter is specific to the phy function being invoked.
+ *
+ * status, zero indicates success.
+ */
+int isci_phy_control(struct asd_sas_phy *sas_phy,
+ enum phy_func func,
+ void *buf)
+{
+ int ret = 0;
+ struct isci_phy *iphy = sas_phy->lldd_phy;
+ struct isci_port *iport = iphy->isci_port;
+ struct isci_host *ihost = sas_phy->ha->lldd_ha;
+ unsigned long flags;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: phy %p; func %d; buf %p; isci phy %p, port %p\n",
+ __func__, sas_phy, func, buf, iphy, iport);
+
+ switch (func) {
+ case PHY_FUNC_DISABLE:
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ sci_phy_stop(iphy);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ break;
+
+ case PHY_FUNC_LINK_RESET:
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ sci_phy_stop(iphy);
+ sci_phy_start(iphy);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ break;
+
+ case PHY_FUNC_HARD_RESET:
+ if (!iport)
+ return -ENODEV;
+
+ /* Perform the port reset. */
+ ret = isci_port_perform_hard_reset(ihost, iport, iphy);
+
+ break;
+
+ default:
+ dev_dbg(&ihost->pdev->dev,
+ "%s: phy %p; func %d NOT IMPLEMENTED!\n",
+ __func__, sas_phy, func);
+ ret = -ENOSYS;
+ break;
+ }
+ return ret;
+}
diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h
new file mode 100644
index 0000000..67699c8
--- /dev/null
+++ b/drivers/scsi/isci/phy.h
@@ -0,0 +1,504 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _ISCI_PHY_H_
+#define _ISCI_PHY_H_
+
+#include <scsi/sas.h>
+#include <scsi/libsas.h>
+#include "isci.h"
+#include "sas.h"
+
+/* This is the timeout value for the SATA phy to wait for a SIGNATURE FIS
+ * before restarting the starting state machine. Technically, the old parallel
+ * ATA specification required up to 30 seconds for a device to issue its
+ * signature FIS as a result of a soft reset. Now we see that devices respond
+ * generally within 15 seconds, but we'll use 25 for now.
+ */
+#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT 25000
+
+/* This is the timeout for the SATA OOB/SN because the hardware does not
+ * recognize a hot plug after OOB signal but before the SN signals. We need to
+ * make sure after a hotplug timeout if we have not received the speed event
+ * notification from the hardware that we restart the hardware OOB state
+ * machine.
+ */
+#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250
+
+enum sci_phy_protocol {
+ SCIC_SDS_PHY_PROTOCOL_UNKNOWN,
+ SCIC_SDS_PHY_PROTOCOL_SAS,
+ SCIC_SDS_PHY_PROTOCOL_SATA,
+ SCIC_SDS_MAX_PHY_PROTOCOLS
+};
+
+/**
+ * isci_phy - hba local phy infrastructure
+ * @sm:
+ * @protocol: attached device protocol
+ * @phy_index: physical index relative to the controller (0-3)
+ * @bcn_received_while_port_unassigned: bcn to report after port association
+ * @sata_timer: timeout SATA signature FIS arrival
+ */
+struct isci_phy {
+ struct sci_base_state_machine sm;
+ struct isci_port *owning_port;
+ enum sas_linkrate max_negotiated_speed;
+ enum sci_phy_protocol protocol;
+ u8 phy_index;
+ bool bcn_received_while_port_unassigned;
+ bool is_in_link_training;
+ struct sci_timer sata_timer;
+ struct scu_transport_layer_registers __iomem *transport_layer_registers;
+ struct scu_link_layer_registers __iomem *link_layer_registers;
+ struct asd_sas_phy sas_phy;
+ struct isci_port *isci_port;
+ u8 sas_addr[SAS_ADDR_SIZE];
+ union {
+ struct sas_identify_frame iaf;
+ struct dev_to_host_fis fis;
+ } frame_rcvd;
+};
+
+static inline struct isci_phy *to_iphy(struct asd_sas_phy *sas_phy)
+{
+ struct isci_phy *iphy = container_of(sas_phy, typeof(*iphy), sas_phy);
+
+ return iphy;
+}
+
+struct sci_phy_cap {
+ union {
+ struct {
+ /*
+ * The SAS specification indicates the start bit shall
+ * always be set to
+ * 1. This implementation will have the start bit set
+ * to 0 if the PHY CAPABILITIES were either not
+ * received or speed negotiation failed.
+ */
+ u8 start:1;
+ u8 tx_ssc_type:1;
+ u8 res1:2;
+ u8 req_logical_linkrate:4;
+
+ u32 gen1_no_ssc:1;
+ u32 gen1_ssc:1;
+ u32 gen2_no_ssc:1;
+ u32 gen2_ssc:1;
+ u32 gen3_no_ssc:1;
+ u32 gen3_ssc:1;
+ u32 res2:17;
+ u32 parity:1;
+ };
+ u32 all;
+ };
+} __packed;
+
+/* this data structure reflects the link layer transmit identification reg */
+struct sci_phy_proto {
+ union {
+ struct {
+ u16 _r_a:1;
+ u16 smp_iport:1;
+ u16 stp_iport:1;
+ u16 ssp_iport:1;
+ u16 _r_b:4;
+ u16 _r_c:1;
+ u16 smp_tport:1;
+ u16 stp_tport:1;
+ u16 ssp_tport:1;
+ u16 _r_d:4;
+ };
+ u16 all;
+ };
+} __packed;
+
+
+/**
+ * struct sci_phy_properties - This structure defines the properties common to
+ * all phys that can be retrieved.
+ *
+ *
+ */
+struct sci_phy_properties {
+ /**
+ * This field specifies the port that currently contains the
+ * supplied phy. This field may be set to NULL
+ * if the phy is not currently contained in a port.
+ */
+ struct isci_port *iport;
+
+ /**
+ * This field specifies the link rate at which the phy is
+ * currently operating.
+ */
+ enum sas_linkrate negotiated_link_rate;
+
+ /**
+ * This field specifies the index of the phy in relation to other
+ * phys within the controller. This index is zero relative.
+ */
+ u8 index;
+};
+
+/**
+ * struct sci_sas_phy_properties - This structure defines the properties,
+ * specific to a SAS phy, that can be retrieved.
+ *
+ *
+ */
+struct sci_sas_phy_properties {
+ /**
+ * This field delineates the Identify Address Frame received
+ * from the remote end point.
+ */
+ struct sas_identify_frame rcvd_iaf;
+
+ /**
+ * This field delineates the Phy capabilities structure received
+ * from the remote end point.
+ */
+ struct sci_phy_cap rcvd_cap;
+
+};
+
+/**
+ * struct sci_sata_phy_properties - This structure defines the properties,
+ * specific to a SATA phy, that can be retrieved.
+ *
+ *
+ */
+struct sci_sata_phy_properties {
+ /**
+ * This field delineates the signature FIS received from the
+ * attached target.
+ */
+ struct dev_to_host_fis signature_fis;
+
+ /**
+ * This field specifies to the user if a port selector is connected
+ * on the specified phy.
+ */
+ bool is_port_selector_present;
+
+};
+
+/**
+ * enum sci_phy_counter_id - This enumeration depicts the various pieces of
+ * optional information that can be retrieved for a specific phy.
+ *
+ *
+ */
+enum sci_phy_counter_id {
+ /**
+ * This PHY information field tracks the number of frames received.
+ */
+ SCIC_PHY_COUNTER_RECEIVED_FRAME,
+
+ /**
+ * This PHY information field tracks the number of frames transmitted.
+ */
+ SCIC_PHY_COUNTER_TRANSMITTED_FRAME,
+
+ /**
+ * This PHY information field tracks the number of DWORDs received.
+ */
+ SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD,
+
+ /**
+ * This PHY information field tracks the number of DWORDs transmitted.
+ */
+ SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD,
+
+ /**
+ * This PHY information field tracks the number of times DWORD
+ * synchronization was lost.
+ */
+ SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR,
+
+ /**
+ * This PHY information field tracks the number of received DWORDs with
+ * running disparity errors.
+ */
+ SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR,
+
+ /**
+ * This PHY information field tracks the number of received frames with a
+ * CRC error (not including short or truncated frames).
+ */
+ SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR,
+
+ /**
+ * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT)
+ * primitives received.
+ */
+ SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT,
+
+ /**
+ * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT)
+ * primitives transmitted.
+ */
+ SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT,
+
+ /**
+ * This PHY information field tracks the number of times the inactivity
+ * timer for connections on the phy has been utilized.
+ */
+ SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED,
+
+ /**
+ * This PHY information field tracks the number of DONE (CREDIT TIMEOUT)
+ * primitives received.
+ */
+ SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT,
+
+ /**
+ * This PHY information field tracks the number of DONE (CREDIT TIMEOUT)
+ * primitives transmitted.
+ */
+ SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT,
+
+ /**
+ * This PHY information field tracks the number of CREDIT BLOCKED
+ * primitives received.
+ * @note Depending on remote device implementation, credit blocks
+ * may occur regularly.
+ */
+ SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED,
+
+ /**
+ * This PHY information field contains the number of short frames
+ * received. A short frame is simply a frame smaller then what is
+ * allowed by either the SAS or SATA specification.
+ */
+ SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME,
+
+ /**
+ * This PHY information field contains the number of frames received after
+ * credit has been exhausted.
+ */
+ SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT,
+
+ /**
+ * This PHY information field contains the number of frames received after
+ * a DONE has been received.
+ */
+ SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE,
+
+ /**
+ * This PHY information field contains the number of times the phy
+ * failed to achieve DWORD synchronization during speed negotiation.
+ */
+ SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR
+};
+
+enum sci_phy_states {
+ /**
+ * Simply the initial state for the base domain state machine.
+ */
+ SCI_PHY_INITIAL,
+
+ /**
+ * This state indicates that the phy has successfully been stopped.
+ * In this state no new IO operations are permitted on this phy.
+ * This state is entered from the INITIAL state.
+ * This state is entered from the STARTING state.
+ * This state is entered from the READY state.
+ * This state is entered from the RESETTING state.
+ */
+ SCI_PHY_STOPPED,
+
+ /**
+ * This state indicates that the phy is in the process of becomming
+ * ready. In this state no new IO operations are permitted on this phy.
+ * This state is entered from the STOPPED state.
+ * This state is entered from the READY state.
+ * This state is entered from the RESETTING state.
+ */
+ SCI_PHY_STARTING,
+
+ /**
+ * Initial state
+ */
+ SCI_PHY_SUB_INITIAL,
+
+ /**
+ * Wait state for the hardware OSSP event type notification
+ */
+ SCI_PHY_SUB_AWAIT_OSSP_EN,
+
+ /**
+ * Wait state for the PHY speed notification
+ */
+ SCI_PHY_SUB_AWAIT_SAS_SPEED_EN,
+
+ /**
+ * Wait state for the IAF Unsolicited frame notification
+ */
+ SCI_PHY_SUB_AWAIT_IAF_UF,
+
+ /**
+ * Wait state for the request to consume power
+ */
+ SCI_PHY_SUB_AWAIT_SAS_POWER,
+
+ /**
+ * Wait state for request to consume power
+ */
+ SCI_PHY_SUB_AWAIT_SATA_POWER,
+
+ /**
+ * Wait state for the SATA PHY notification
+ */
+ SCI_PHY_SUB_AWAIT_SATA_PHY_EN,
+
+ /**
+ * Wait for the SATA PHY speed notification
+ */
+ SCI_PHY_SUB_AWAIT_SATA_SPEED_EN,
+
+ /**
+ * Wait state for the SIGNATURE FIS unsolicited frame notification
+ */
+ SCI_PHY_SUB_AWAIT_SIG_FIS_UF,
+
+ /**
+ * Exit state for this state machine
+ */
+ SCI_PHY_SUB_FINAL,
+
+ /**
+ * This state indicates the the phy is now ready. Thus, the user
+ * is able to perform IO operations utilizing this phy as long as it
+ * is currently part of a valid port.
+ * This state is entered from the STARTING state.
+ */
+ SCI_PHY_READY,
+
+ /**
+ * This state indicates that the phy is in the process of being reset.
+ * In this state no new IO operations are permitted on this phy.
+ * This state is entered from the READY state.
+ */
+ SCI_PHY_RESETTING,
+
+ /**
+ * Simply the final state for the base phy state machine.
+ */
+ SCI_PHY_FINAL,
+};
+
+void sci_phy_construct(
+ struct isci_phy *iphy,
+ struct isci_port *iport,
+ u8 phy_index);
+
+struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy);
+
+void sci_phy_set_port(
+ struct isci_phy *iphy,
+ struct isci_port *iport);
+
+enum sci_status sci_phy_initialize(
+ struct isci_phy *iphy,
+ struct scu_transport_layer_registers __iomem *transport_layer_registers,
+ struct scu_link_layer_registers __iomem *link_layer_registers);
+
+enum sci_status sci_phy_start(
+ struct isci_phy *iphy);
+
+enum sci_status sci_phy_stop(
+ struct isci_phy *iphy);
+
+enum sci_status sci_phy_reset(
+ struct isci_phy *iphy);
+
+void sci_phy_resume(
+ struct isci_phy *iphy);
+
+void sci_phy_setup_transport(
+ struct isci_phy *iphy,
+ u32 device_id);
+
+enum sci_status sci_phy_event_handler(
+ struct isci_phy *iphy,
+ u32 event_code);
+
+enum sci_status sci_phy_frame_handler(
+ struct isci_phy *iphy,
+ u32 frame_index);
+
+enum sci_status sci_phy_consume_power_handler(
+ struct isci_phy *iphy);
+
+void sci_phy_get_sas_address(
+ struct isci_phy *iphy,
+ struct sci_sas_address *sas_address);
+
+void sci_phy_get_attached_sas_address(
+ struct isci_phy *iphy,
+ struct sci_sas_address *sas_address);
+
+struct sci_phy_proto;
+void sci_phy_get_protocols(
+ struct isci_phy *iphy,
+ struct sci_phy_proto *protocols);
+enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy);
+
+struct isci_host;
+void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index);
+int isci_phy_control(struct asd_sas_phy *phy, enum phy_func func, void *buf);
+
+#endif /* !defined(_ISCI_PHY_H_) */
diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
new file mode 100644
index 0000000..8f6f9b7
--- /dev/null
+++ b/drivers/scsi/isci/port.c
@@ -0,0 +1,1757 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "isci.h"
+#include "port.h"
+#include "request.h"
+
+#define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000)
+#define SCU_DUMMY_INDEX (0xFFFF)
+
+static void isci_port_change_state(struct isci_port *iport, enum isci_status status)
+{
+ unsigned long flags;
+
+ dev_dbg(&iport->isci_host->pdev->dev,
+ "%s: iport = %p, state = 0x%x\n",
+ __func__, iport, status);
+
+ /* XXX pointless lock */
+ spin_lock_irqsave(&iport->state_lock, flags);
+ iport->status = status;
+ spin_unlock_irqrestore(&iport->state_lock, flags);
+}
+
+static void sci_port_get_protocols(struct isci_port *iport, struct sci_phy_proto *proto)
+{
+ u8 index;
+
+ proto->all = 0;
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ struct isci_phy *iphy = iport->phy_table[index];
+
+ if (!iphy)
+ continue;
+ sci_phy_get_protocols(iphy, proto);
+ }
+}
+
+static u32 sci_port_get_phys(struct isci_port *iport)
+{
+ u32 index;
+ u32 mask;
+
+ mask = 0;
+ for (index = 0; index < SCI_MAX_PHYS; index++)
+ if (iport->phy_table[index])
+ mask |= (1 << index);
+
+ return mask;
+}
+
+/**
+ * sci_port_get_properties() - This method simply returns the properties
+ * regarding the port, such as: physical index, protocols, sas address, etc.
+ * @port: this parameter specifies the port for which to retrieve the physical
+ * index.
+ * @properties: This parameter specifies the properties structure into which to
+ * copy the requested information.
+ *
+ * Indicate if the user specified a valid port. SCI_SUCCESS This value is
+ * returned if the specified port was valid. SCI_FAILURE_INVALID_PORT This
+ * value is returned if the specified port is not valid. When this value is
+ * returned, no data is copied to the properties output parameter.
+ */
+static enum sci_status sci_port_get_properties(struct isci_port *iport,
+ struct sci_port_properties *prop)
+{
+ if (!iport || iport->logical_port_index == SCIC_SDS_DUMMY_PORT)
+ return SCI_FAILURE_INVALID_PORT;
+
+ prop->index = iport->logical_port_index;
+ prop->phy_mask = sci_port_get_phys(iport);
+ sci_port_get_sas_address(iport, &prop->local.sas_address);
+ sci_port_get_protocols(iport, &prop->local.protocols);
+ sci_port_get_attached_sas_address(iport, &prop->remote.sas_address);
+
+ return SCI_SUCCESS;
+}
+
+static void sci_port_bcn_enable(struct isci_port *iport)
+{
+ struct isci_phy *iphy;
+ u32 val;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) {
+ iphy = iport->phy_table[i];
+ if (!iphy)
+ continue;
+ val = readl(&iphy->link_layer_registers->link_layer_control);
+ /* clear the bit by writing 1. */
+ writel(val, &iphy->link_layer_registers->link_layer_control);
+ }
+}
+
+/* called under sci_lock to stabilize phy:port associations */
+void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport)
+{
+ int i;
+
+ clear_bit(IPORT_BCN_BLOCKED, &iport->flags);
+ wake_up(&ihost->eventq);
+
+ if (!test_and_clear_bit(IPORT_BCN_PENDING, &iport->flags))
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) {
+ struct isci_phy *iphy = iport->phy_table[i];
+
+ if (!iphy)
+ continue;
+
+ ihost->sas_ha.notify_port_event(&iphy->sas_phy,
+ PORTE_BROADCAST_RCVD);
+ break;
+ }
+}
+
+static void isci_port_bc_change_received(struct isci_host *ihost,
+ struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ if (iport && test_bit(IPORT_BCN_BLOCKED, &iport->flags)) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: disabled BCN; isci_phy = %p, sas_phy = %p\n",
+ __func__, iphy, &iphy->sas_phy);
+ set_bit(IPORT_BCN_PENDING, &iport->flags);
+ atomic_inc(&iport->event);
+ wake_up(&ihost->eventq);
+ } else {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: isci_phy = %p, sas_phy = %p\n",
+ __func__, iphy, &iphy->sas_phy);
+
+ ihost->sas_ha.notify_port_event(&iphy->sas_phy,
+ PORTE_BROADCAST_RCVD);
+ }
+ sci_port_bcn_enable(iport);
+}
+
+static void isci_port_link_up(struct isci_host *isci_host,
+ struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ unsigned long flags;
+ struct sci_port_properties properties;
+ unsigned long success = true;
+
+ BUG_ON(iphy->isci_port != NULL);
+
+ iphy->isci_port = iport;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_port = %p\n",
+ __func__, iport);
+
+ spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags);
+
+ isci_port_change_state(iphy->isci_port, isci_starting);
+
+ sci_port_get_properties(iport, &properties);
+
+ if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) {
+ u64 attached_sas_address;
+
+ iphy->sas_phy.oob_mode = SATA_OOB_MODE;
+ iphy->sas_phy.frame_rcvd_size = sizeof(struct dev_to_host_fis);
+
+ /*
+ * For direct-attached SATA devices, the SCI core will
+ * automagically assign a SAS address to the end device
+ * for the purpose of creating a port. This SAS address
+ * will not be the same as assigned to the PHY and needs
+ * to be obtained from struct sci_port_properties properties.
+ */
+ attached_sas_address = properties.remote.sas_address.high;
+ attached_sas_address <<= 32;
+ attached_sas_address |= properties.remote.sas_address.low;
+ swab64s(&attached_sas_address);
+
+ memcpy(&iphy->sas_phy.attached_sas_addr,
+ &attached_sas_address, sizeof(attached_sas_address));
+ } else if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
+ iphy->sas_phy.oob_mode = SAS_OOB_MODE;
+ iphy->sas_phy.frame_rcvd_size = sizeof(struct sas_identify_frame);
+
+ /* Copy the attached SAS address from the IAF */
+ memcpy(iphy->sas_phy.attached_sas_addr,
+ iphy->frame_rcvd.iaf.sas_addr, SAS_ADDR_SIZE);
+ } else {
+ dev_err(&isci_host->pdev->dev, "%s: unkown target\n", __func__);
+ success = false;
+ }
+
+ iphy->sas_phy.phy->negotiated_linkrate = sci_phy_linkrate(iphy);
+
+ spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags);
+
+ /* Notify libsas that we have an address frame, if indeed
+ * we've found an SSP, SMP, or STP target */
+ if (success)
+ isci_host->sas_ha.notify_port_event(&iphy->sas_phy,
+ PORTE_BYTES_DMAED);
+}
+
+
+/**
+ * isci_port_link_down() - This function is called by the sci core when a link
+ * becomes inactive.
+ * @isci_host: This parameter specifies the isci host object.
+ * @phy: This parameter specifies the isci phy with the active link.
+ * @port: This parameter specifies the isci port with the active link.
+ *
+ */
+static void isci_port_link_down(struct isci_host *isci_host,
+ struct isci_phy *isci_phy,
+ struct isci_port *isci_port)
+{
+ struct isci_remote_device *isci_device;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_port = %p\n", __func__, isci_port);
+
+ if (isci_port) {
+
+ /* check to see if this is the last phy on this port. */
+ if (isci_phy->sas_phy.port &&
+ isci_phy->sas_phy.port->num_phys == 1) {
+ atomic_inc(&isci_port->event);
+ isci_port_bcn_enable(isci_host, isci_port);
+
+ /* change the state for all devices on this port. The
+ * next task sent to this device will be returned as
+ * SAS_TASK_UNDELIVERED, and the scsi mid layer will
+ * remove the target
+ */
+ list_for_each_entry(isci_device,
+ &isci_port->remote_dev_list,
+ node) {
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device = %p\n",
+ __func__, isci_device);
+ set_bit(IDEV_GONE, &isci_device->flags);
+ }
+ }
+ isci_port_change_state(isci_port, isci_stopping);
+ }
+
+ /* Notify libsas of the borken link, this will trigger calls to our
+ * isci_port_deformed and isci_dev_gone functions.
+ */
+ sas_phy_disconnected(&isci_phy->sas_phy);
+ isci_host->sas_ha.notify_phy_event(&isci_phy->sas_phy,
+ PHYE_LOSS_OF_SIGNAL);
+
+ isci_phy->isci_port = NULL;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_port = %p - Done\n", __func__, isci_port);
+}
+
+
+/**
+ * isci_port_ready() - This function is called by the sci core when a link
+ * becomes ready.
+ * @isci_host: This parameter specifies the isci host object.
+ * @port: This parameter specifies the sci port with the active link.
+ *
+ */
+static void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_port)
+{
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_port = %p\n", __func__, isci_port);
+
+ complete_all(&isci_port->start_complete);
+ isci_port_change_state(isci_port, isci_ready);
+ return;
+}
+
+/**
+ * isci_port_not_ready() - This function is called by the sci core when a link
+ * is not ready. All remote devices on this link will be removed if they are
+ * in the stopping state.
+ * @isci_host: This parameter specifies the isci host object.
+ * @port: This parameter specifies the sci port with the active link.
+ *
+ */
+static void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *isci_port)
+{
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_port = %p\n", __func__, isci_port);
+}
+
+static void isci_port_stop_complete(struct isci_host *ihost,
+ struct isci_port *iport,
+ enum sci_status completion_status)
+{
+ dev_dbg(&ihost->pdev->dev, "Port stop complete\n");
+}
+
+/**
+ * isci_port_hard_reset_complete() - This function is called by the sci core
+ * when the hard reset complete notification has been received.
+ * @port: This parameter specifies the sci port with the active link.
+ * @completion_status: This parameter specifies the core status for the reset
+ * process.
+ *
+ */
+static void isci_port_hard_reset_complete(struct isci_port *isci_port,
+ enum sci_status completion_status)
+{
+ dev_dbg(&isci_port->isci_host->pdev->dev,
+ "%s: isci_port = %p, completion_status=%x\n",
+ __func__, isci_port, completion_status);
+
+ /* Save the status of the hard reset from the port. */
+ isci_port->hard_reset_status = completion_status;
+
+ complete_all(&isci_port->hard_reset_complete);
+}
+
+/* This method will return a true value if the specified phy can be assigned to
+ * this port The following is a list of phys for each port that are allowed: -
+ * Port 0 - 3 2 1 0 - Port 1 - 1 - Port 2 - 3 2 - Port 3 - 3 This method
+ * doesn't preclude all configurations. It merely ensures that a phy is part
+ * of the allowable set of phy identifiers for that port. For example, one
+ * could assign phy 3 to port 0 and no other phys. Please refer to
+ * sci_port_is_phy_mask_valid() for information regarding whether the
+ * phy_mask for a port can be supported. bool true if this is a valid phy
+ * assignment for the port false if this is not a valid phy assignment for the
+ * port
+ */
+bool sci_port_is_valid_phy_assignment(struct isci_port *iport, u32 phy_index)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ struct sci_user_parameters *user = &ihost->user_parameters;
+
+ /* Initialize to invalid value. */
+ u32 existing_phy_index = SCI_MAX_PHYS;
+ u32 index;
+
+ if ((iport->physical_port_index == 1) && (phy_index != 1))
+ return false;
+
+ if (iport->physical_port_index == 3 && phy_index != 3)
+ return false;
+
+ if (iport->physical_port_index == 2 &&
+ (phy_index == 0 || phy_index == 1))
+ return false;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++)
+ if (iport->phy_table[index] && index != phy_index)
+ existing_phy_index = index;
+
+ /* Ensure that all of the phys in the port are capable of
+ * operating at the same maximum link rate.
+ */
+ if (existing_phy_index < SCI_MAX_PHYS &&
+ user->phys[phy_index].max_speed_generation !=
+ user->phys[existing_phy_index].max_speed_generation)
+ return false;
+
+ return true;
+}
+
+/**
+ *
+ * @sci_port: This is the port object for which to determine if the phy mask
+ * can be supported.
+ *
+ * This method will return a true value if the port's phy mask can be supported
+ * by the SCU. The following is a list of valid PHY mask configurations for
+ * each port: - Port 0 - [[3 2] 1] 0 - Port 1 - [1] - Port 2 - [[3] 2]
+ * - Port 3 - [3] This method returns a boolean indication specifying if the
+ * phy mask can be supported. true if this is a valid phy assignment for the
+ * port false if this is not a valid phy assignment for the port
+ */
+static bool sci_port_is_phy_mask_valid(
+ struct isci_port *iport,
+ u32 phy_mask)
+{
+ if (iport->physical_port_index == 0) {
+ if (((phy_mask & 0x0F) == 0x0F)
+ || ((phy_mask & 0x03) == 0x03)
+ || ((phy_mask & 0x01) == 0x01)
+ || (phy_mask == 0))
+ return true;
+ } else if (iport->physical_port_index == 1) {
+ if (((phy_mask & 0x02) == 0x02)
+ || (phy_mask == 0))
+ return true;
+ } else if (iport->physical_port_index == 2) {
+ if (((phy_mask & 0x0C) == 0x0C)
+ || ((phy_mask & 0x04) == 0x04)
+ || (phy_mask == 0))
+ return true;
+ } else if (iport->physical_port_index == 3) {
+ if (((phy_mask & 0x08) == 0x08)
+ || (phy_mask == 0))
+ return true;
+ }
+
+ return false;
+}
+
+/*
+ * This method retrieves a currently active (i.e. connected) phy contained in
+ * the port. Currently, the lowest order phy that is connected is returned.
+ * This method returns a pointer to a SCIS_SDS_PHY object. NULL This value is
+ * returned if there are no currently active (i.e. connected to a remote end
+ * point) phys contained in the port. All other values specify a struct sci_phy
+ * object that is active in the port.
+ */
+static struct isci_phy *sci_port_get_a_connected_phy(struct isci_port *iport)
+{
+ u32 index;
+ struct isci_phy *iphy;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ /* Ensure that the phy is both part of the port and currently
+ * connected to the remote end-point.
+ */
+ iphy = iport->phy_table[index];
+ if (iphy && sci_port_active_phy(iport, iphy))
+ return iphy;
+ }
+
+ return NULL;
+}
+
+static enum sci_status sci_port_set_phy(struct isci_port *iport, struct isci_phy *iphy)
+{
+ /* Check to see if we can add this phy to a port
+ * that means that the phy is not part of a port and that the port does
+ * not already have a phy assinged to the phy index.
+ */
+ if (!iport->phy_table[iphy->phy_index] &&
+ !phy_get_non_dummy_port(iphy) &&
+ sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) {
+ /* Phy is being added in the stopped state so we are in MPC mode
+ * make logical port index = physical port index
+ */
+ iport->logical_port_index = iport->physical_port_index;
+ iport->phy_table[iphy->phy_index] = iphy;
+ sci_phy_set_port(iphy, iport);
+
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE;
+}
+
+static enum sci_status sci_port_clear_phy(struct isci_port *iport, struct isci_phy *iphy)
+{
+ /* Make sure that this phy is part of this port */
+ if (iport->phy_table[iphy->phy_index] == iphy &&
+ phy_get_non_dummy_port(iphy) == iport) {
+ struct isci_host *ihost = iport->owning_controller;
+
+ /* Yep it is assigned to this port so remove it */
+ sci_phy_set_port(iphy, &ihost->ports[SCI_MAX_PORTS]);
+ iport->phy_table[iphy->phy_index] = NULL;
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE;
+}
+
+void sci_port_get_sas_address(struct isci_port *iport, struct sci_sas_address *sas)
+{
+ u32 index;
+
+ sas->high = 0;
+ sas->low = 0;
+ for (index = 0; index < SCI_MAX_PHYS; index++)
+ if (iport->phy_table[index])
+ sci_phy_get_sas_address(iport->phy_table[index], sas);
+}
+
+void sci_port_get_attached_sas_address(struct isci_port *iport, struct sci_sas_address *sas)
+{
+ struct isci_phy *iphy;
+
+ /*
+ * Ensure that the phy is both part of the port and currently
+ * connected to the remote end-point.
+ */
+ iphy = sci_port_get_a_connected_phy(iport);
+ if (iphy) {
+ if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) {
+ sci_phy_get_attached_sas_address(iphy, sas);
+ } else {
+ sci_phy_get_sas_address(iphy, sas);
+ sas->low += iphy->phy_index;
+ }
+ } else {
+ sas->high = 0;
+ sas->low = 0;
+ }
+}
+
+/**
+ * sci_port_construct_dummy_rnc() - create dummy rnc for si workaround
+ *
+ * @sci_port: logical port on which we need to create the remote node context
+ * @rni: remote node index for this remote node context.
+ *
+ * This routine will construct a dummy remote node context data structure
+ * This structure will be posted to the hardware to work around a scheduler
+ * error in the hardware.
+ */
+static void sci_port_construct_dummy_rnc(struct isci_port *iport, u16 rni)
+{
+ union scu_remote_node_context *rnc;
+
+ rnc = &iport->owning_controller->remote_node_context_table[rni];
+
+ memset(rnc, 0, sizeof(union scu_remote_node_context));
+
+ rnc->ssp.remote_sas_address_hi = 0;
+ rnc->ssp.remote_sas_address_lo = 0;
+
+ rnc->ssp.remote_node_index = rni;
+ rnc->ssp.remote_node_port_width = 1;
+ rnc->ssp.logical_port_index = iport->physical_port_index;
+
+ rnc->ssp.nexus_loss_timer_enable = false;
+ rnc->ssp.check_bit = false;
+ rnc->ssp.is_valid = true;
+ rnc->ssp.is_remote_node_context = true;
+ rnc->ssp.function_number = 0;
+ rnc->ssp.arbitration_wait_time = 0;
+}
+
+/*
+ * construct a dummy task context data structure. This
+ * structure will be posted to the hardwre to work around a scheduler error
+ * in the hardware.
+ */
+static void sci_port_construct_dummy_task(struct isci_port *iport, u16 tag)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ struct scu_task_context *task_context;
+
+ task_context = &ihost->task_context_table[ISCI_TAG_TCI(tag)];
+ memset(task_context, 0, sizeof(struct scu_task_context));
+
+ task_context->initiator_request = 1;
+ task_context->connection_rate = 1;
+ task_context->logical_port_index = iport->physical_port_index;
+ task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP;
+ task_context->task_index = ISCI_TAG_TCI(tag);
+ task_context->valid = SCU_TASK_CONTEXT_VALID;
+ task_context->context_type = SCU_TASK_CONTEXT_TYPE;
+ task_context->remote_node_index = iport->reserved_rni;
+ task_context->do_not_dma_ssp_good_response = 1;
+ task_context->task_phase = 0x01;
+}
+
+static void sci_port_destroy_dummy_resources(struct isci_port *iport)
+{
+ struct isci_host *ihost = iport->owning_controller;
+
+ if (iport->reserved_tag != SCI_CONTROLLER_INVALID_IO_TAG)
+ isci_free_tag(ihost, iport->reserved_tag);
+
+ if (iport->reserved_rni != SCU_DUMMY_INDEX)
+ sci_remote_node_table_release_remote_node_index(&ihost->available_remote_nodes,
+ 1, iport->reserved_rni);
+
+ iport->reserved_rni = SCU_DUMMY_INDEX;
+ iport->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG;
+}
+
+void sci_port_setup_transports(struct isci_port *iport, u32 device_id)
+{
+ u8 index;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ if (iport->active_phy_mask & (1 << index))
+ sci_phy_setup_transport(iport->phy_table[index], device_id);
+ }
+}
+
+static void sci_port_activate_phy(struct isci_port *iport, struct isci_phy *iphy,
+ bool do_notify_user)
+{
+ struct isci_host *ihost = iport->owning_controller;
+
+ if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA)
+ sci_phy_resume(iphy);
+
+ iport->active_phy_mask |= 1 << iphy->phy_index;
+
+ sci_controller_clear_invalid_phy(ihost, iphy);
+
+ if (do_notify_user == true)
+ isci_port_link_up(ihost, iport, iphy);
+}
+
+void sci_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy,
+ bool do_notify_user)
+{
+ struct isci_host *ihost = iport->owning_controller;
+
+ iport->active_phy_mask &= ~(1 << iphy->phy_index);
+
+ iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
+
+ /* Re-assign the phy back to the LP as if it were a narrow port */
+ writel(iphy->phy_index,
+ &iport->port_pe_configuration_register[iphy->phy_index]);
+
+ if (do_notify_user == true)
+ isci_port_link_down(ihost, iphy, iport);
+}
+
+static void sci_port_invalid_link_up(struct isci_port *iport, struct isci_phy *iphy)
+{
+ struct isci_host *ihost = iport->owning_controller;
+
+ /*
+ * Check to see if we have alreay reported this link as bad and if
+ * not go ahead and tell the SCI_USER that we have discovered an
+ * invalid link.
+ */
+ if ((ihost->invalid_phy_mask & (1 << iphy->phy_index)) == 0) {
+ ihost->invalid_phy_mask |= 1 << iphy->phy_index;
+ dev_warn(&ihost->pdev->dev, "Invalid link up!\n");
+ }
+}
+
+static bool is_port_ready_state(enum sci_port_states state)
+{
+ switch (state) {
+ case SCI_PORT_READY:
+ case SCI_PORT_SUB_WAITING:
+ case SCI_PORT_SUB_OPERATIONAL:
+ case SCI_PORT_SUB_CONFIGURING:
+ return true;
+ default:
+ return false;
+ }
+}
+
+/* flag dummy rnc hanling when exiting a ready state */
+static void port_state_machine_change(struct isci_port *iport,
+ enum sci_port_states state)
+{
+ struct sci_base_state_machine *sm = &iport->sm;
+ enum sci_port_states old_state = sm->current_state_id;
+
+ if (is_port_ready_state(old_state) && !is_port_ready_state(state))
+ iport->ready_exit = true;
+
+ sci_change_state(sm, state);
+ iport->ready_exit = false;
+}
+
+/**
+ * sci_port_general_link_up_handler - phy can be assigned to port?
+ * @sci_port: sci_port object for which has a phy that has gone link up.
+ * @sci_phy: This is the struct isci_phy object that has gone link up.
+ * @do_notify_user: This parameter specifies whether to inform the user (via
+ * sci_port_link_up()) as to the fact that a new phy as become ready.
+ *
+ * Determine if this phy can be assigned to this
+ * port . If the phy is not a valid PHY for
+ * this port then the function will notify the user. A PHY can only be
+ * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in
+ * the same port. none
+ */
+static void sci_port_general_link_up_handler(struct isci_port *iport,
+ struct isci_phy *iphy,
+ bool do_notify_user)
+{
+ struct sci_sas_address port_sas_address;
+ struct sci_sas_address phy_sas_address;
+
+ sci_port_get_attached_sas_address(iport, &port_sas_address);
+ sci_phy_get_attached_sas_address(iphy, &phy_sas_address);
+
+ /* If the SAS address of the new phy matches the SAS address of
+ * other phys in the port OR this is the first phy in the port,
+ * then activate the phy and allow it to be used for operations
+ * in this port.
+ */
+ if ((phy_sas_address.high == port_sas_address.high &&
+ phy_sas_address.low == port_sas_address.low) ||
+ iport->active_phy_mask == 0) {
+ struct sci_base_state_machine *sm = &iport->sm;
+
+ sci_port_activate_phy(iport, iphy, do_notify_user);
+ if (sm->current_state_id == SCI_PORT_RESETTING)
+ port_state_machine_change(iport, SCI_PORT_READY);
+ } else
+ sci_port_invalid_link_up(iport, iphy);
+}
+
+
+
+/**
+ * This method returns false if the port only has a single phy object assigned.
+ * If there are no phys or more than one phy then the method will return
+ * true.
+ * @sci_port: The port for which the wide port condition is to be checked.
+ *
+ * bool true Is returned if this is a wide ported port. false Is returned if
+ * this is a narrow port.
+ */
+static bool sci_port_is_wide(struct isci_port *iport)
+{
+ u32 index;
+ u32 phy_count = 0;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ if (iport->phy_table[index] != NULL) {
+ phy_count++;
+ }
+ }
+
+ return phy_count != 1;
+}
+
+/**
+ * This method is called by the PHY object when the link is detected. if the
+ * port wants the PHY to continue on to the link up state then the port
+ * layer must return true. If the port object returns false the phy object
+ * must halt its attempt to go link up.
+ * @sci_port: The port associated with the phy object.
+ * @sci_phy: The phy object that is trying to go link up.
+ *
+ * true if the phy object can continue to the link up condition. true Is
+ * returned if this phy can continue to the ready state. false Is returned if
+ * can not continue on to the ready state. This notification is in place for
+ * wide ports and direct attached phys. Since there are no wide ported SATA
+ * devices this could become an invalid port configuration.
+ */
+bool sci_port_link_detected(
+ struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ if ((iport->logical_port_index != SCIC_SDS_DUMMY_PORT) &&
+ (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) &&
+ sci_port_is_wide(iport)) {
+ sci_port_invalid_link_up(iport, iphy);
+
+ return false;
+ }
+
+ return true;
+}
+
+static void port_timeout(unsigned long data)
+{
+ struct sci_timer *tmr = (struct sci_timer *)data;
+ struct isci_port *iport = container_of(tmr, typeof(*iport), timer);
+ struct isci_host *ihost = iport->owning_controller;
+ unsigned long flags;
+ u32 current_state;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (tmr->cancel)
+ goto done;
+
+ current_state = iport->sm.current_state_id;
+
+ if (current_state == SCI_PORT_RESETTING) {
+ /* if the port is still in the resetting state then the timeout
+ * fired before the reset completed.
+ */
+ port_state_machine_change(iport, SCI_PORT_FAILED);
+ } else if (current_state == SCI_PORT_STOPPED) {
+ /* if the port is stopped then the start request failed In this
+ * case stay in the stopped state.
+ */
+ dev_err(sciport_to_dev(iport),
+ "%s: SCIC Port 0x%p failed to stop before tiemout.\n",
+ __func__,
+ iport);
+ } else if (current_state == SCI_PORT_STOPPING) {
+ /* if the port is still stopping then the stop has not completed */
+ isci_port_stop_complete(iport->owning_controller,
+ iport,
+ SCI_FAILURE_TIMEOUT);
+ } else {
+ /* The port is in the ready state and we have a timer
+ * reporting a timeout this should not happen.
+ */
+ dev_err(sciport_to_dev(iport),
+ "%s: SCIC Port 0x%p is processing a timeout operation "
+ "in state %d.\n", __func__, iport, current_state);
+ }
+
+done:
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
+
+/* --------------------------------------------------------------------------- */
+
+/**
+ * This function updates the hardwares VIIT entry for this port.
+ *
+ *
+ */
+static void sci_port_update_viit_entry(struct isci_port *iport)
+{
+ struct sci_sas_address sas_address;
+
+ sci_port_get_sas_address(iport, &sas_address);
+
+ writel(sas_address.high,
+ &iport->viit_registers->initiator_sas_address_hi);
+ writel(sas_address.low,
+ &iport->viit_registers->initiator_sas_address_lo);
+
+ /* This value get cleared just in case its not already cleared */
+ writel(0, &iport->viit_registers->reserved);
+
+ /* We are required to update the status register last */
+ writel(SCU_VIIT_ENTRY_ID_VIIT |
+ SCU_VIIT_IPPT_INITIATOR |
+ ((1 << iport->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) |
+ SCU_VIIT_STATUS_ALL_VALID,
+ &iport->viit_registers->status);
+}
+
+enum sas_linkrate sci_port_get_max_allowed_speed(struct isci_port *iport)
+{
+ u16 index;
+ struct isci_phy *iphy;
+ enum sas_linkrate max_allowed_speed = SAS_LINK_RATE_6_0_GBPS;
+
+ /*
+ * Loop through all of the phys in this port and find the phy with the
+ * lowest maximum link rate. */
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ iphy = iport->phy_table[index];
+ if (iphy && sci_port_active_phy(iport, iphy) &&
+ iphy->max_negotiated_speed < max_allowed_speed)
+ max_allowed_speed = iphy->max_negotiated_speed;
+ }
+
+ return max_allowed_speed;
+}
+
+static void sci_port_suspend_port_task_scheduler(struct isci_port *iport)
+{
+ u32 pts_control_value;
+
+ pts_control_value = readl(&iport->port_task_scheduler_registers->control);
+ pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND);
+ writel(pts_control_value, &iport->port_task_scheduler_registers->control);
+}
+
+/**
+ * sci_port_post_dummy_request() - post dummy/workaround request
+ * @sci_port: port to post task
+ *
+ * Prevent the hardware scheduler from posting new requests to the front
+ * of the scheduler queue causing a starvation problem for currently
+ * ongoing requests.
+ *
+ */
+static void sci_port_post_dummy_request(struct isci_port *iport)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ u16 tag = iport->reserved_tag;
+ struct scu_task_context *tc;
+ u32 command;
+
+ tc = &ihost->task_context_table[ISCI_TAG_TCI(tag)];
+ tc->abort = 0;
+
+ command = SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
+ iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT |
+ ISCI_TAG_TCI(tag);
+
+ sci_controller_post_request(ihost, command);
+}
+
+/**
+ * This routine will abort the dummy request. This will alow the hardware to
+ * power down parts of the silicon to save power.
+ *
+ * @sci_port: The port on which the task must be aborted.
+ *
+ */
+static void sci_port_abort_dummy_request(struct isci_port *iport)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ u16 tag = iport->reserved_tag;
+ struct scu_task_context *tc;
+ u32 command;
+
+ tc = &ihost->task_context_table[ISCI_TAG_TCI(tag)];
+ tc->abort = 1;
+
+ command = SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT |
+ iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT |
+ ISCI_TAG_TCI(tag);
+
+ sci_controller_post_request(ihost, command);
+}
+
+/**
+ *
+ * @sci_port: This is the struct isci_port object to resume.
+ *
+ * This method will resume the port task scheduler for this port object. none
+ */
+static void
+sci_port_resume_port_task_scheduler(struct isci_port *iport)
+{
+ u32 pts_control_value;
+
+ pts_control_value = readl(&iport->port_task_scheduler_registers->control);
+ pts_control_value &= ~SCU_PTSxCR_GEN_BIT(SUSPEND);
+ writel(pts_control_value, &iport->port_task_scheduler_registers->control);
+}
+
+static void sci_port_ready_substate_waiting_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ sci_port_suspend_port_task_scheduler(iport);
+
+ iport->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS;
+
+ if (iport->active_phy_mask != 0) {
+ /* At least one of the phys on the port is ready */
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_OPERATIONAL);
+ }
+}
+
+static void sci_port_ready_substate_operational_enter(struct sci_base_state_machine *sm)
+{
+ u32 index;
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+ struct isci_host *ihost = iport->owning_controller;
+
+ isci_port_ready(ihost, iport);
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ if (iport->phy_table[index]) {
+ writel(iport->physical_port_index,
+ &iport->port_pe_configuration_register[
+ iport->phy_table[index]->phy_index]);
+ }
+ }
+
+ sci_port_update_viit_entry(iport);
+
+ sci_port_resume_port_task_scheduler(iport);
+
+ /*
+ * Post the dummy task for the port so the hardware can schedule
+ * io correctly
+ */
+ sci_port_post_dummy_request(iport);
+}
+
+static void sci_port_invalidate_dummy_remote_node(struct isci_port *iport)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ u8 phys_index = iport->physical_port_index;
+ union scu_remote_node_context *rnc;
+ u16 rni = iport->reserved_rni;
+ u32 command;
+
+ rnc = &ihost->remote_node_context_table[rni];
+
+ rnc->ssp.is_valid = false;
+
+ /* ensure the preceding tc abort request has reached the
+ * controller and give it ample time to act before posting the rnc
+ * invalidate
+ */
+ readl(&ihost->smu_registers->interrupt_status); /* flush */
+ udelay(10);
+
+ command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE |
+ phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni;
+
+ sci_controller_post_request(ihost, command);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct isci_port object.
+ *
+ * This method will perform the actions required by the struct isci_port on
+ * exiting the SCI_PORT_SUB_OPERATIONAL. This function reports
+ * the port not ready and suspends the port task scheduler. none
+ */
+static void sci_port_ready_substate_operational_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+ struct isci_host *ihost = iport->owning_controller;
+
+ /*
+ * Kill the dummy task for this port if it has not yet posted
+ * the hardware will treat this as a NOP and just return abort
+ * complete.
+ */
+ sci_port_abort_dummy_request(iport);
+
+ isci_port_not_ready(ihost, iport);
+
+ if (iport->ready_exit)
+ sci_port_invalidate_dummy_remote_node(iport);
+}
+
+static void sci_port_ready_substate_configuring_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+ struct isci_host *ihost = iport->owning_controller;
+
+ if (iport->active_phy_mask == 0) {
+ isci_port_not_ready(ihost, iport);
+
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_WAITING);
+ } else if (iport->started_request_count == 0)
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_OPERATIONAL);
+}
+
+static void sci_port_ready_substate_configuring_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ sci_port_suspend_port_task_scheduler(iport);
+ if (iport->ready_exit)
+ sci_port_invalidate_dummy_remote_node(iport);
+}
+
+enum sci_status sci_port_start(struct isci_port *iport)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ enum sci_status status = SCI_SUCCESS;
+ enum sci_port_states state;
+ u32 phy_mask;
+
+ state = iport->sm.current_state_id;
+ if (state != SCI_PORT_STOPPED) {
+ dev_warn(sciport_to_dev(iport),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ if (iport->assigned_device_count > 0) {
+ /* TODO This is a start failure operation because
+ * there are still devices assigned to this port.
+ * There must be no devices assigned to a port on a
+ * start operation.
+ */
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+ }
+
+ if (iport->reserved_rni == SCU_DUMMY_INDEX) {
+ u16 rni = sci_remote_node_table_allocate_remote_node(
+ &ihost->available_remote_nodes, 1);
+
+ if (rni != SCU_DUMMY_INDEX)
+ sci_port_construct_dummy_rnc(iport, rni);
+ else
+ status = SCI_FAILURE_INSUFFICIENT_RESOURCES;
+ iport->reserved_rni = rni;
+ }
+
+ if (iport->reserved_tag == SCI_CONTROLLER_INVALID_IO_TAG) {
+ u16 tag;
+
+ tag = isci_alloc_tag(ihost);
+ if (tag == SCI_CONTROLLER_INVALID_IO_TAG)
+ status = SCI_FAILURE_INSUFFICIENT_RESOURCES;
+ else
+ sci_port_construct_dummy_task(iport, tag);
+ iport->reserved_tag = tag;
+ }
+
+ if (status == SCI_SUCCESS) {
+ phy_mask = sci_port_get_phys(iport);
+
+ /*
+ * There are one or more phys assigned to this port. Make sure
+ * the port's phy mask is in fact legal and supported by the
+ * silicon.
+ */
+ if (sci_port_is_phy_mask_valid(iport, phy_mask) == true) {
+ port_state_machine_change(iport,
+ SCI_PORT_READY);
+
+ return SCI_SUCCESS;
+ }
+ status = SCI_FAILURE;
+ }
+
+ if (status != SCI_SUCCESS)
+ sci_port_destroy_dummy_resources(iport);
+
+ return status;
+}
+
+enum sci_status sci_port_stop(struct isci_port *iport)
+{
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+ switch (state) {
+ case SCI_PORT_STOPPED:
+ return SCI_SUCCESS;
+ case SCI_PORT_SUB_WAITING:
+ case SCI_PORT_SUB_OPERATIONAL:
+ case SCI_PORT_SUB_CONFIGURING:
+ case SCI_PORT_RESETTING:
+ port_state_machine_change(iport,
+ SCI_PORT_STOPPING);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(iport),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+static enum sci_status sci_port_hard_reset(struct isci_port *iport, u32 timeout)
+{
+ enum sci_status status = SCI_FAILURE_INVALID_PHY;
+ struct isci_phy *iphy = NULL;
+ enum sci_port_states state;
+ u32 phy_index;
+
+ state = iport->sm.current_state_id;
+ if (state != SCI_PORT_SUB_OPERATIONAL) {
+ dev_warn(sciport_to_dev(iport),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ /* Select a phy on which we can send the hard reset request. */
+ for (phy_index = 0; phy_index < SCI_MAX_PHYS && !iphy; phy_index++) {
+ iphy = iport->phy_table[phy_index];
+ if (iphy && !sci_port_active_phy(iport, iphy)) {
+ /*
+ * We found a phy but it is not ready select
+ * different phy
+ */
+ iphy = NULL;
+ }
+ }
+
+ /* If we have a phy then go ahead and start the reset procedure */
+ if (!iphy)
+ return status;
+ status = sci_phy_reset(iphy);
+
+ if (status != SCI_SUCCESS)
+ return status;
+
+ sci_mod_timer(&iport->timer, timeout);
+ iport->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED;
+
+ port_state_machine_change(iport, SCI_PORT_RESETTING);
+ return SCI_SUCCESS;
+}
+
+/**
+ * sci_port_add_phy() -
+ * @sci_port: This parameter specifies the port in which the phy will be added.
+ * @sci_phy: This parameter is the phy which is to be added to the port.
+ *
+ * This method will add a PHY to the selected port. This method returns an
+ * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other
+ * status is a failure to add the phy to the port.
+ */
+enum sci_status sci_port_add_phy(struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ enum sci_status status;
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+ switch (state) {
+ case SCI_PORT_STOPPED: {
+ struct sci_sas_address port_sas_address;
+
+ /* Read the port assigned SAS Address if there is one */
+ sci_port_get_sas_address(iport, &port_sas_address);
+
+ if (port_sas_address.high != 0 && port_sas_address.low != 0) {
+ struct sci_sas_address phy_sas_address;
+
+ /* Make sure that the PHY SAS Address matches the SAS Address
+ * for this port
+ */
+ sci_phy_get_sas_address(iphy, &phy_sas_address);
+
+ if (port_sas_address.high != phy_sas_address.high ||
+ port_sas_address.low != phy_sas_address.low)
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+ }
+ return sci_port_set_phy(iport, iphy);
+ }
+ case SCI_PORT_SUB_WAITING:
+ case SCI_PORT_SUB_OPERATIONAL:
+ status = sci_port_set_phy(iport, iphy);
+
+ if (status != SCI_SUCCESS)
+ return status;
+
+ sci_port_general_link_up_handler(iport, iphy, true);
+ iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
+ port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING);
+
+ return status;
+ case SCI_PORT_SUB_CONFIGURING:
+ status = sci_port_set_phy(iport, iphy);
+
+ if (status != SCI_SUCCESS)
+ return status;
+ sci_port_general_link_up_handler(iport, iphy, true);
+
+ /* Re-enter the configuring state since this may be the last phy in
+ * the port.
+ */
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_CONFIGURING);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(iport),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+/**
+ * sci_port_remove_phy() -
+ * @sci_port: This parameter specifies the port in which the phy will be added.
+ * @sci_phy: This parameter is the phy which is to be added to the port.
+ *
+ * This method will remove the PHY from the selected PORT. This method returns
+ * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any
+ * other status is a failure to add the phy to the port.
+ */
+enum sci_status sci_port_remove_phy(struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ enum sci_status status;
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+
+ switch (state) {
+ case SCI_PORT_STOPPED:
+ return sci_port_clear_phy(iport, iphy);
+ case SCI_PORT_SUB_OPERATIONAL:
+ status = sci_port_clear_phy(iport, iphy);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ sci_port_deactivate_phy(iport, iphy, true);
+ iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_CONFIGURING);
+ return SCI_SUCCESS;
+ case SCI_PORT_SUB_CONFIGURING:
+ status = sci_port_clear_phy(iport, iphy);
+
+ if (status != SCI_SUCCESS)
+ return status;
+ sci_port_deactivate_phy(iport, iphy, true);
+
+ /* Re-enter the configuring state since this may be the last phy in
+ * the port
+ */
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_CONFIGURING);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(iport),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+enum sci_status sci_port_link_up(struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+ switch (state) {
+ case SCI_PORT_SUB_WAITING:
+ /* Since this is the first phy going link up for the port we
+ * can just enable it and continue
+ */
+ sci_port_activate_phy(iport, iphy, true);
+
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_OPERATIONAL);
+ return SCI_SUCCESS;
+ case SCI_PORT_SUB_OPERATIONAL:
+ sci_port_general_link_up_handler(iport, iphy, true);
+ return SCI_SUCCESS;
+ case SCI_PORT_RESETTING:
+ /* TODO We should make sure that the phy that has gone
+ * link up is the same one on which we sent the reset. It is
+ * possible that the phy on which we sent the reset is not the
+ * one that has gone link up and we want to make sure that
+ * phy being reset comes back. Consider the case where a
+ * reset is sent but before the hardware processes the reset it
+ * get a link up on the port because of a hot plug event.
+ * because of the reset request this phy will go link down
+ * almost immediately.
+ */
+
+ /* In the resetting state we don't notify the user regarding
+ * link up and link down notifications.
+ */
+ sci_port_general_link_up_handler(iport, iphy, false);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(iport),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+enum sci_status sci_port_link_down(struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+ switch (state) {
+ case SCI_PORT_SUB_OPERATIONAL:
+ sci_port_deactivate_phy(iport, iphy, true);
+
+ /* If there are no active phys left in the port, then
+ * transition the port to the WAITING state until such time
+ * as a phy goes link up
+ */
+ if (iport->active_phy_mask == 0)
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_WAITING);
+ return SCI_SUCCESS;
+ case SCI_PORT_RESETTING:
+ /* In the resetting state we don't notify the user regarding
+ * link up and link down notifications. */
+ sci_port_deactivate_phy(iport, iphy, false);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(iport),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+enum sci_status sci_port_start_io(struct isci_port *iport,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+ switch (state) {
+ case SCI_PORT_SUB_WAITING:
+ return SCI_FAILURE_INVALID_STATE;
+ case SCI_PORT_SUB_OPERATIONAL:
+ iport->started_request_count++;
+ return SCI_SUCCESS;
+ default:
+ dev_warn(sciport_to_dev(iport),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+enum sci_status sci_port_complete_io(struct isci_port *iport,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ enum sci_port_states state;
+
+ state = iport->sm.current_state_id;
+ switch (state) {
+ case SCI_PORT_STOPPED:
+ dev_warn(sciport_to_dev(iport),
+ "%s: in wrong state: %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ case SCI_PORT_STOPPING:
+ sci_port_decrement_request_count(iport);
+
+ if (iport->started_request_count == 0)
+ port_state_machine_change(iport,
+ SCI_PORT_STOPPED);
+ break;
+ case SCI_PORT_READY:
+ case SCI_PORT_RESETTING:
+ case SCI_PORT_FAILED:
+ case SCI_PORT_SUB_WAITING:
+ case SCI_PORT_SUB_OPERATIONAL:
+ sci_port_decrement_request_count(iport);
+ break;
+ case SCI_PORT_SUB_CONFIGURING:
+ sci_port_decrement_request_count(iport);
+ if (iport->started_request_count == 0) {
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_OPERATIONAL);
+ }
+ break;
+ }
+ return SCI_SUCCESS;
+}
+
+static void sci_port_enable_port_task_scheduler(struct isci_port *iport)
+{
+ u32 pts_control_value;
+
+ /* enable the port task scheduler in a suspended state */
+ pts_control_value = readl(&iport->port_task_scheduler_registers->control);
+ pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND);
+ writel(pts_control_value, &iport->port_task_scheduler_registers->control);
+}
+
+static void sci_port_disable_port_task_scheduler(struct isci_port *iport)
+{
+ u32 pts_control_value;
+
+ pts_control_value = readl(&iport->port_task_scheduler_registers->control);
+ pts_control_value &=
+ ~(SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND));
+ writel(pts_control_value, &iport->port_task_scheduler_registers->control);
+}
+
+static void sci_port_post_dummy_remote_node(struct isci_port *iport)
+{
+ struct isci_host *ihost = iport->owning_controller;
+ u8 phys_index = iport->physical_port_index;
+ union scu_remote_node_context *rnc;
+ u16 rni = iport->reserved_rni;
+ u32 command;
+
+ rnc = &ihost->remote_node_context_table[rni];
+ rnc->ssp.is_valid = true;
+
+ command = SCU_CONTEXT_COMMAND_POST_RNC_32 |
+ phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni;
+
+ sci_controller_post_request(ihost, command);
+
+ /* ensure hardware has seen the post rnc command and give it
+ * ample time to act before sending the suspend
+ */
+ readl(&ihost->smu_registers->interrupt_status); /* flush */
+ udelay(10);
+
+ command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX |
+ phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni;
+
+ sci_controller_post_request(ihost, command);
+}
+
+static void sci_port_stopped_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ if (iport->sm.previous_state_id == SCI_PORT_STOPPING) {
+ /*
+ * If we enter this state becasuse of a request to stop
+ * the port then we want to disable the hardwares port
+ * task scheduler. */
+ sci_port_disable_port_task_scheduler(iport);
+ }
+}
+
+static void sci_port_stopped_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ /* Enable and suspend the port task scheduler */
+ sci_port_enable_port_task_scheduler(iport);
+}
+
+static void sci_port_ready_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+ struct isci_host *ihost = iport->owning_controller;
+ u32 prev_state;
+
+ prev_state = iport->sm.previous_state_id;
+ if (prev_state == SCI_PORT_RESETTING)
+ isci_port_hard_reset_complete(iport, SCI_SUCCESS);
+ else
+ isci_port_not_ready(ihost, iport);
+
+ /* Post and suspend the dummy remote node context for this port. */
+ sci_port_post_dummy_remote_node(iport);
+
+ /* Start the ready substate machine */
+ port_state_machine_change(iport,
+ SCI_PORT_SUB_WAITING);
+}
+
+static void sci_port_resetting_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ sci_del_timer(&iport->timer);
+}
+
+static void sci_port_stopping_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ sci_del_timer(&iport->timer);
+
+ sci_port_destroy_dummy_resources(iport);
+}
+
+static void sci_port_failed_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+
+ isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT);
+}
+
+/* --------------------------------------------------------------------------- */
+
+static const struct sci_base_state sci_port_state_table[] = {
+ [SCI_PORT_STOPPED] = {
+ .enter_state = sci_port_stopped_state_enter,
+ .exit_state = sci_port_stopped_state_exit
+ },
+ [SCI_PORT_STOPPING] = {
+ .exit_state = sci_port_stopping_state_exit
+ },
+ [SCI_PORT_READY] = {
+ .enter_state = sci_port_ready_state_enter,
+ },
+ [SCI_PORT_SUB_WAITING] = {
+ .enter_state = sci_port_ready_substate_waiting_enter,
+ },
+ [SCI_PORT_SUB_OPERATIONAL] = {
+ .enter_state = sci_port_ready_substate_operational_enter,
+ .exit_state = sci_port_ready_substate_operational_exit
+ },
+ [SCI_PORT_SUB_CONFIGURING] = {
+ .enter_state = sci_port_ready_substate_configuring_enter,
+ .exit_state = sci_port_ready_substate_configuring_exit
+ },
+ [SCI_PORT_RESETTING] = {
+ .exit_state = sci_port_resetting_state_exit
+ },
+ [SCI_PORT_FAILED] = {
+ .enter_state = sci_port_failed_state_enter,
+ }
+};
+
+void sci_port_construct(struct isci_port *iport, u8 index,
+ struct isci_host *ihost)
+{
+ sci_init_sm(&iport->sm, sci_port_state_table, SCI_PORT_STOPPED);
+
+ iport->logical_port_index = SCIC_SDS_DUMMY_PORT;
+ iport->physical_port_index = index;
+ iport->active_phy_mask = 0;
+ iport->ready_exit = false;
+
+ iport->owning_controller = ihost;
+
+ iport->started_request_count = 0;
+ iport->assigned_device_count = 0;
+
+ iport->reserved_rni = SCU_DUMMY_INDEX;
+ iport->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG;
+
+ sci_init_timer(&iport->timer, port_timeout);
+
+ iport->port_task_scheduler_registers = NULL;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++)
+ iport->phy_table[index] = NULL;
+}
+
+void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index)
+{
+ INIT_LIST_HEAD(&iport->remote_dev_list);
+ INIT_LIST_HEAD(&iport->domain_dev_list);
+ spin_lock_init(&iport->state_lock);
+ init_completion(&iport->start_complete);
+ iport->isci_host = ihost;
+ isci_port_change_state(iport, isci_freed);
+ atomic_set(&iport->event, 0);
+}
+
+/**
+ * isci_port_get_state() - This function gets the status of the port object.
+ * @isci_port: This parameter points to the isci_port object
+ *
+ * status of the object as a isci_status enum.
+ */
+enum isci_status isci_port_get_state(
+ struct isci_port *isci_port)
+{
+ return isci_port->status;
+}
+
+void sci_port_broadcast_change_received(struct isci_port *iport, struct isci_phy *iphy)
+{
+ struct isci_host *ihost = iport->owning_controller;
+
+ /* notify the user. */
+ isci_port_bc_change_received(ihost, iport, iphy);
+}
+
+int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ unsigned long flags;
+ enum sci_status status;
+ int idx, ret = TMF_RESP_FUNC_COMPLETE;
+
+ dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n",
+ __func__, iport);
+
+ init_completion(&iport->hard_reset_complete);
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT
+ status = sci_port_hard_reset(iport, ISCI_PORT_RESET_TIMEOUT);
+
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ if (status == SCI_SUCCESS) {
+ wait_for_completion(&iport->hard_reset_complete);
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: iport = %p; hard reset completion\n",
+ __func__, iport);
+
+ if (iport->hard_reset_status != SCI_SUCCESS)
+ ret = TMF_RESP_FUNC_FAILED;
+ } else {
+ ret = TMF_RESP_FUNC_FAILED;
+
+ dev_err(&ihost->pdev->dev,
+ "%s: iport = %p; sci_port_hard_reset call"
+ " failed 0x%x\n",
+ __func__, iport, status);
+
+ }
+
+ /* If the hard reset for the port has failed, consider this
+ * the same as link failures on all phys in the port.
+ */
+ if (ret != TMF_RESP_FUNC_COMPLETE) {
+
+ dev_err(&ihost->pdev->dev,
+ "%s: iport = %p; hard reset failed "
+ "(0x%x) - driving explicit link fail for all phys\n",
+ __func__, iport, iport->hard_reset_status);
+
+ /* Down all phys in the port. */
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ for (idx = 0; idx < SCI_MAX_PHYS; ++idx) {
+ struct isci_phy *iphy = iport->phy_table[idx];
+
+ if (!iphy)
+ continue;
+ sci_phy_stop(iphy);
+ sci_phy_start(iphy);
+ }
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ }
+ return ret;
+}
+
+/**
+ * isci_port_deformed() - This function is called by libsas when a port becomes
+ * inactive.
+ * @phy: This parameter specifies the libsas phy with the inactive port.
+ *
+ */
+void isci_port_deformed(struct asd_sas_phy *phy)
+{
+ pr_debug("%s: sas_phy = %p\n", __func__, phy);
+}
+
+/**
+ * isci_port_formed() - This function is called by libsas when a port becomes
+ * active.
+ * @phy: This parameter specifies the libsas phy with the active port.
+ *
+ */
+void isci_port_formed(struct asd_sas_phy *phy)
+{
+ pr_debug("%s: sas_phy = %p, sas_port = %p\n", __func__, phy, phy->port);
+}
diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h
new file mode 100644
index 0000000..b50ecd4
--- /dev/null
+++ b/drivers/scsi/isci/port.h
@@ -0,0 +1,306 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ISCI_PORT_H_
+#define _ISCI_PORT_H_
+
+#include <scsi/libsas.h>
+#include "isci.h"
+#include "sas.h"
+#include "phy.h"
+
+#define SCIC_SDS_DUMMY_PORT 0xFF
+
+struct isci_phy;
+struct isci_host;
+
+enum isci_status {
+ isci_freed = 0x00,
+ isci_starting = 0x01,
+ isci_ready = 0x02,
+ isci_ready_for_io = 0x03,
+ isci_stopping = 0x04,
+ isci_stopped = 0x05,
+};
+
+/**
+ * struct isci_port - isci direct attached sas port object
+ * @event: counts bcns and port stop events (for bcn filtering)
+ * @ready_exit: several states constitute 'ready'. When exiting ready we
+ * need to take extra port-teardown actions that are
+ * skipped when exiting to another 'ready' state.
+ * @logical_port_index: software port index
+ * @physical_port_index: hardware port index
+ * @active_phy_mask: identifies phy members
+ * @reserved_tag:
+ * @reserved_rni: reserver for port task scheduler workaround
+ * @started_request_count: reference count for outstanding commands
+ * @not_ready_reason: set during state transitions and notified
+ * @timer: timeout start/stop operations
+ */
+struct isci_port {
+ enum isci_status status;
+ #define IPORT_BCN_BLOCKED 0
+ #define IPORT_BCN_PENDING 1
+ unsigned long flags;
+ atomic_t event;
+ struct isci_host *isci_host;
+ struct asd_sas_port sas_port;
+ struct list_head remote_dev_list;
+ spinlock_t state_lock;
+ struct list_head domain_dev_list;
+ struct completion start_complete;
+ struct completion hard_reset_complete;
+ enum sci_status hard_reset_status;
+ struct sci_base_state_machine sm;
+ bool ready_exit;
+ u8 logical_port_index;
+ u8 physical_port_index;
+ u8 active_phy_mask;
+ u16 reserved_rni;
+ u16 reserved_tag;
+ u32 started_request_count;
+ u32 assigned_device_count;
+ u32 not_ready_reason;
+ struct isci_phy *phy_table[SCI_MAX_PHYS];
+ struct isci_host *owning_controller;
+ struct sci_timer timer;
+ struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers;
+ /* XXX rework: only one register, no need to replicate per-port */
+ u32 __iomem *port_pe_configuration_register;
+ struct scu_viit_entry __iomem *viit_registers;
+};
+
+enum sci_port_not_ready_reason_code {
+ SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS,
+ SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED,
+ SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION,
+ SCIC_PORT_NOT_READY_RECONFIGURING,
+
+ SCIC_PORT_NOT_READY_REASON_CODE_MAX
+};
+
+struct sci_port_end_point_properties {
+ struct sci_sas_address sas_address;
+ struct sci_phy_proto protocols;
+};
+
+struct sci_port_properties {
+ u32 index;
+ struct sci_port_end_point_properties local;
+ struct sci_port_end_point_properties remote;
+ u32 phy_mask;
+};
+
+/**
+ * enum sci_port_states - This enumeration depicts all the states for the
+ * common port state machine.
+ *
+ *
+ */
+enum sci_port_states {
+ /**
+ * This state indicates that the port has successfully been stopped.
+ * In this state no new IO operations are permitted.
+ * This state is entered from the STOPPING state.
+ */
+ SCI_PORT_STOPPED,
+
+ /**
+ * This state indicates that the port is in the process of stopping.
+ * In this state no new IO operations are permitted, but existing IO
+ * operations are allowed to complete.
+ * This state is entered from the READY state.
+ */
+ SCI_PORT_STOPPING,
+
+ /**
+ * This state indicates the port is now ready. Thus, the user is
+ * able to perform IO operations on this port.
+ * This state is entered from the STARTING state.
+ */
+ SCI_PORT_READY,
+
+ /**
+ * The substate where the port is started and ready but has no
+ * active phys.
+ */
+ SCI_PORT_SUB_WAITING,
+
+ /**
+ * The substate where the port is started and ready and there is
+ * at least one phy operational.
+ */
+ SCI_PORT_SUB_OPERATIONAL,
+
+ /**
+ * The substate where the port is started and there was an
+ * add/remove phy event. This state is only used in Automatic
+ * Port Configuration Mode (APC)
+ */
+ SCI_PORT_SUB_CONFIGURING,
+
+ /**
+ * This state indicates the port is in the process of performing a hard
+ * reset. Thus, the user is unable to perform IO operations on this
+ * port.
+ * This state is entered from the READY state.
+ */
+ SCI_PORT_RESETTING,
+
+ /**
+ * This state indicates the port has failed a reset request. This state
+ * is entered when a port reset request times out.
+ * This state is entered from the RESETTING state.
+ */
+ SCI_PORT_FAILED,
+
+
+};
+
+static inline void sci_port_decrement_request_count(struct isci_port *iport)
+{
+ if (WARN_ONCE(iport->started_request_count == 0,
+ "%s: tried to decrement started_request_count past 0!?",
+ __func__))
+ /* pass */;
+ else
+ iport->started_request_count--;
+}
+
+#define sci_port_active_phy(port, phy) \
+ (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0)
+
+void sci_port_construct(
+ struct isci_port *iport,
+ u8 port_index,
+ struct isci_host *ihost);
+
+enum sci_status sci_port_start(struct isci_port *iport);
+enum sci_status sci_port_stop(struct isci_port *iport);
+
+enum sci_status sci_port_add_phy(
+ struct isci_port *iport,
+ struct isci_phy *iphy);
+
+enum sci_status sci_port_remove_phy(
+ struct isci_port *iport,
+ struct isci_phy *iphy);
+
+void sci_port_setup_transports(
+ struct isci_port *iport,
+ u32 device_id);
+
+void isci_port_bcn_enable(struct isci_host *, struct isci_port *);
+
+void sci_port_deactivate_phy(
+ struct isci_port *iport,
+ struct isci_phy *iphy,
+ bool do_notify_user);
+
+bool sci_port_link_detected(
+ struct isci_port *iport,
+ struct isci_phy *iphy);
+
+enum sci_status sci_port_link_up(struct isci_port *iport,
+ struct isci_phy *iphy);
+enum sci_status sci_port_link_down(struct isci_port *iport,
+ struct isci_phy *iphy);
+
+struct isci_request;
+struct isci_remote_device;
+enum sci_status sci_port_start_io(
+ struct isci_port *iport,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq);
+
+enum sci_status sci_port_complete_io(
+ struct isci_port *iport,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq);
+
+enum sas_linkrate sci_port_get_max_allowed_speed(
+ struct isci_port *iport);
+
+void sci_port_broadcast_change_received(
+ struct isci_port *iport,
+ struct isci_phy *iphy);
+
+bool sci_port_is_valid_phy_assignment(
+ struct isci_port *iport,
+ u32 phy_index);
+
+void sci_port_get_sas_address(
+ struct isci_port *iport,
+ struct sci_sas_address *sas_address);
+
+void sci_port_get_attached_sas_address(
+ struct isci_port *iport,
+ struct sci_sas_address *sas_address);
+
+enum isci_status isci_port_get_state(
+ struct isci_port *isci_port);
+
+void isci_port_formed(struct asd_sas_phy *);
+void isci_port_deformed(struct asd_sas_phy *);
+
+void isci_port_init(
+ struct isci_port *port,
+ struct isci_host *host,
+ int index);
+
+int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
+ struct isci_phy *iphy);
+#endif /* !defined(_ISCI_PORT_H_) */
diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c
new file mode 100644
index 0000000..486b113
--- /dev/null
+++ b/drivers/scsi/isci/port_config.c
@@ -0,0 +1,754 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "host.h"
+
+#define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10)
+#define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10)
+#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (100)
+
+enum SCIC_SDS_APC_ACTIVITY {
+ SCIC_SDS_APC_SKIP_PHY,
+ SCIC_SDS_APC_ADD_PHY,
+ SCIC_SDS_APC_START_TIMER,
+
+ SCIC_SDS_APC_ACTIVITY_MAX
+};
+
+/*
+ * ******************************************************************************
+ * General port configuration agent routines
+ * ****************************************************************************** */
+
+/**
+ *
+ * @address_one: A SAS Address to be compared.
+ * @address_two: A SAS Address to be compared.
+ *
+ * Compare the two SAS Address and if SAS Address One is greater than SAS
+ * Address Two then return > 0 else if SAS Address One is less than SAS Address
+ * Two return < 0 Otherwise they are the same return 0 A signed value of x > 0
+ * > y where x is returned for Address One > Address Two y is returned for
+ * Address One < Address Two 0 is returned ofr Address One = Address Two
+ */
+static s32 sci_sas_address_compare(
+ struct sci_sas_address address_one,
+ struct sci_sas_address address_two)
+{
+ if (address_one.high > address_two.high) {
+ return 1;
+ } else if (address_one.high < address_two.high) {
+ return -1;
+ } else if (address_one.low > address_two.low) {
+ return 1;
+ } else if (address_one.low < address_two.low) {
+ return -1;
+ }
+
+ /* The two SAS Address must be identical */
+ return 0;
+}
+
+/**
+ *
+ * @controller: The controller object used for the port search.
+ * @phy: The phy object to match.
+ *
+ * This routine will find a matching port for the phy. This means that the
+ * port and phy both have the same broadcast sas address and same received sas
+ * address. The port address or the NULL if there is no matching
+ * port. port address if the port can be found to match the phy.
+ * NULL if there is no matching port for the phy.
+ */
+static struct isci_port *sci_port_configuration_agent_find_port(
+ struct isci_host *ihost,
+ struct isci_phy *iphy)
+{
+ u8 i;
+ struct sci_sas_address port_sas_address;
+ struct sci_sas_address port_attached_device_address;
+ struct sci_sas_address phy_sas_address;
+ struct sci_sas_address phy_attached_device_address;
+
+ /*
+ * Since this phy can be a member of a wide port check to see if one or
+ * more phys match the sent and received SAS address as this phy in which
+ * case it should participate in the same port.
+ */
+ sci_phy_get_sas_address(iphy, &phy_sas_address);
+ sci_phy_get_attached_sas_address(iphy, &phy_attached_device_address);
+
+ for (i = 0; i < ihost->logical_port_entries; i++) {
+ struct isci_port *iport = &ihost->ports[i];
+
+ sci_port_get_sas_address(iport, &port_sas_address);
+ sci_port_get_attached_sas_address(iport, &port_attached_device_address);
+
+ if (sci_sas_address_compare(port_sas_address, phy_sas_address) == 0 &&
+ sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0)
+ return iport;
+ }
+
+ return NULL;
+}
+
+/**
+ *
+ * @controller: This is the controller object that contains the port agent
+ * @port_agent: This is the port configruation agent for the controller.
+ *
+ * This routine will validate the port configuration is correct for the SCU
+ * hardware. The SCU hardware allows for port configurations as follows. LP0
+ * -> (PE0), (PE0, PE1), (PE0, PE1, PE2, PE3) LP1 -> (PE1) LP2 -> (PE2), (PE2,
+ * PE3) LP3 -> (PE3) enum sci_status SCI_SUCCESS the port configuration is valid for
+ * this port configuration agent. SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION
+ * the port configuration is not valid for this port configuration agent.
+ */
+static enum sci_status sci_port_configuration_agent_validate_ports(
+ struct isci_host *ihost,
+ struct sci_port_configuration_agent *port_agent)
+{
+ struct sci_sas_address first_address;
+ struct sci_sas_address second_address;
+
+ /*
+ * Sanity check the max ranges for all the phys the max index
+ * is always equal to the port range index */
+ if (port_agent->phy_valid_port_range[0].max_index != 0 ||
+ port_agent->phy_valid_port_range[1].max_index != 1 ||
+ port_agent->phy_valid_port_range[2].max_index != 2 ||
+ port_agent->phy_valid_port_range[3].max_index != 3)
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+
+ /*
+ * This is a request to configure a single x4 port or at least attempt
+ * to make all the phys into a single port */
+ if (port_agent->phy_valid_port_range[0].min_index == 0 &&
+ port_agent->phy_valid_port_range[1].min_index == 0 &&
+ port_agent->phy_valid_port_range[2].min_index == 0 &&
+ port_agent->phy_valid_port_range[3].min_index == 0)
+ return SCI_SUCCESS;
+
+ /*
+ * This is a degenerate case where phy 1 and phy 2 are assigned
+ * to the same port this is explicitly disallowed by the hardware
+ * unless they are part of the same x4 port and this condition was
+ * already checked above. */
+ if (port_agent->phy_valid_port_range[2].min_index == 1) {
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+ }
+
+ /*
+ * PE0 and PE3 can never have the same SAS Address unless they
+ * are part of the same x4 wide port and we have already checked
+ * for this condition. */
+ sci_phy_get_sas_address(&ihost->phys[0], &first_address);
+ sci_phy_get_sas_address(&ihost->phys[3], &second_address);
+
+ if (sci_sas_address_compare(first_address, second_address) == 0) {
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+ }
+
+ /*
+ * PE0 and PE1 are configured into a 2x1 ports make sure that the
+ * SAS Address for PE0 and PE2 are different since they can not be
+ * part of the same port. */
+ if (port_agent->phy_valid_port_range[0].min_index == 0 &&
+ port_agent->phy_valid_port_range[1].min_index == 1) {
+ sci_phy_get_sas_address(&ihost->phys[0], &first_address);
+ sci_phy_get_sas_address(&ihost->phys[2], &second_address);
+
+ if (sci_sas_address_compare(first_address, second_address) == 0) {
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+ }
+ }
+
+ /*
+ * PE2 and PE3 are configured into a 2x1 ports make sure that the
+ * SAS Address for PE1 and PE3 are different since they can not be
+ * part of the same port. */
+ if (port_agent->phy_valid_port_range[2].min_index == 2 &&
+ port_agent->phy_valid_port_range[3].min_index == 3) {
+ sci_phy_get_sas_address(&ihost->phys[1], &first_address);
+ sci_phy_get_sas_address(&ihost->phys[3], &second_address);
+
+ if (sci_sas_address_compare(first_address, second_address) == 0) {
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+ }
+ }
+
+ return SCI_SUCCESS;
+}
+
+/*
+ * ******************************************************************************
+ * Manual port configuration agent routines
+ * ****************************************************************************** */
+
+/* verify all of the phys in the same port are using the same SAS address */
+static enum sci_status
+sci_mpc_agent_validate_phy_configuration(struct isci_host *ihost,
+ struct sci_port_configuration_agent *port_agent)
+{
+ u32 phy_mask;
+ u32 assigned_phy_mask;
+ struct sci_sas_address sas_address;
+ struct sci_sas_address phy_assigned_address;
+ u8 port_index;
+ u8 phy_index;
+
+ assigned_phy_mask = 0;
+ sas_address.high = 0;
+ sas_address.low = 0;
+
+ for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) {
+ phy_mask = ihost->oem_parameters.ports[port_index].phy_mask;
+
+ if (!phy_mask)
+ continue;
+ /*
+ * Make sure that one or more of the phys were not already assinged to
+ * a different port. */
+ if ((phy_mask & ~assigned_phy_mask) == 0) {
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+ }
+
+ /* Find the starting phy index for this round through the loop */
+ for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) {
+ if ((phy_mask & (1 << phy_index)) == 0)
+ continue;
+ sci_phy_get_sas_address(&ihost->phys[phy_index],
+ &sas_address);
+
+ /*
+ * The phy_index can be used as the starting point for the
+ * port range since the hardware starts all logical ports
+ * the same as the PE index. */
+ port_agent->phy_valid_port_range[phy_index].min_index = port_index;
+ port_agent->phy_valid_port_range[phy_index].max_index = phy_index;
+
+ if (phy_index != port_index) {
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+ }
+
+ break;
+ }
+
+ /*
+ * See how many additional phys are being added to this logical port.
+ * Note: We have not moved the current phy_index so we will actually
+ * compare the startting phy with itself.
+ * This is expected and required to add the phy to the port. */
+ while (phy_index < SCI_MAX_PHYS) {
+ if ((phy_mask & (1 << phy_index)) == 0)
+ continue;
+ sci_phy_get_sas_address(&ihost->phys[phy_index],
+ &phy_assigned_address);
+
+ if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0) {
+ /*
+ * The phy mask specified that this phy is part of the same port
+ * as the starting phy and it is not so fail this configuration */
+ return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+ }
+
+ port_agent->phy_valid_port_range[phy_index].min_index = port_index;
+ port_agent->phy_valid_port_range[phy_index].max_index = phy_index;
+
+ sci_port_add_phy(&ihost->ports[port_index],
+ &ihost->phys[phy_index]);
+
+ assigned_phy_mask |= (1 << phy_index);
+ }
+
+ phy_index++;
+ }
+
+ return sci_port_configuration_agent_validate_ports(ihost, port_agent);
+}
+
+static void mpc_agent_timeout(unsigned long data)
+{
+ u8 index;
+ struct sci_timer *tmr = (struct sci_timer *)data;
+ struct sci_port_configuration_agent *port_agent;
+ struct isci_host *ihost;
+ unsigned long flags;
+ u16 configure_phy_mask;
+
+ port_agent = container_of(tmr, typeof(*port_agent), timer);
+ ihost = container_of(port_agent, typeof(*ihost), port_agent);
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (tmr->cancel)
+ goto done;
+
+ port_agent->timer_pending = false;
+
+ /* Find the mask of phys that are reported read but as yet unconfigured into a port */
+ configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ struct isci_phy *iphy = &ihost->phys[index];
+
+ if (configure_phy_mask & (1 << index)) {
+ port_agent->link_up_handler(ihost, port_agent,
+ phy_get_non_dummy_port(iphy),
+ iphy);
+ }
+ }
+
+done:
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
+
+static void sci_mpc_agent_link_up(struct isci_host *ihost,
+ struct sci_port_configuration_agent *port_agent,
+ struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ /* If the port is NULL then the phy was not assigned to a port.
+ * This is because the phy was not given the same SAS Address as
+ * the other PHYs in the port.
+ */
+ if (!iport)
+ return;
+
+ port_agent->phy_ready_mask |= (1 << iphy->phy_index);
+ sci_port_link_up(iport, iphy);
+ if ((iport->active_phy_mask & (1 << iphy->phy_index)))
+ port_agent->phy_configured_mask |= (1 << iphy->phy_index);
+}
+
+/**
+ *
+ * @controller: This is the controller object that receives the link down
+ * notification.
+ * @port: This is the port object associated with the phy. If the is no
+ * associated port this is an NULL. The port is an invalid
+ * handle only if the phy was never port of this port. This happens when
+ * the phy is not broadcasting the same SAS address as the other phys in the
+ * assigned port.
+ * @phy: This is the phy object which has gone link down.
+ *
+ * This function handles the manual port configuration link down notifications.
+ * Since all ports and phys are associated at initialization time we just turn
+ * around and notifiy the port object of the link down event. If this PHY is
+ * not associated with a port there is no action taken. Is it possible to get a
+ * link down notification from a phy that has no assocoated port?
+ */
+static void sci_mpc_agent_link_down(
+ struct isci_host *ihost,
+ struct sci_port_configuration_agent *port_agent,
+ struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ if (iport != NULL) {
+ /*
+ * If we can form a new port from the remainder of the phys
+ * then we want to start the timer to allow the SCI User to
+ * cleanup old devices and rediscover the port before
+ * rebuilding the port with the phys that remain in the ready
+ * state.
+ */
+ port_agent->phy_ready_mask &= ~(1 << iphy->phy_index);
+ port_agent->phy_configured_mask &= ~(1 << iphy->phy_index);
+
+ /*
+ * Check to see if there are more phys waiting to be
+ * configured into a port. If there are allow the SCI User
+ * to tear down this port, if necessary, and then reconstruct
+ * the port after the timeout.
+ */
+ if ((port_agent->phy_configured_mask == 0x0000) &&
+ (port_agent->phy_ready_mask != 0x0000) &&
+ !port_agent->timer_pending) {
+ port_agent->timer_pending = true;
+
+ sci_mod_timer(&port_agent->timer,
+ SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT);
+ }
+
+ sci_port_link_down(iport, iphy);
+ }
+}
+
+/* verify phys are assigned a valid SAS address for automatic port
+ * configuration mode.
+ */
+static enum sci_status
+sci_apc_agent_validate_phy_configuration(struct isci_host *ihost,
+ struct sci_port_configuration_agent *port_agent)
+{
+ u8 phy_index;
+ u8 port_index;
+ struct sci_sas_address sas_address;
+ struct sci_sas_address phy_assigned_address;
+
+ phy_index = 0;
+
+ while (phy_index < SCI_MAX_PHYS) {
+ port_index = phy_index;
+
+ /* Get the assigned SAS Address for the first PHY on the controller. */
+ sci_phy_get_sas_address(&ihost->phys[phy_index],
+ &sas_address);
+
+ while (++phy_index < SCI_MAX_PHYS) {
+ sci_phy_get_sas_address(&ihost->phys[phy_index],
+ &phy_assigned_address);
+
+ /* Verify each of the SAS address are all the same for every PHY */
+ if (sci_sas_address_compare(sas_address, phy_assigned_address) == 0) {
+ port_agent->phy_valid_port_range[phy_index].min_index = port_index;
+ port_agent->phy_valid_port_range[phy_index].max_index = phy_index;
+ } else {
+ port_agent->phy_valid_port_range[phy_index].min_index = phy_index;
+ port_agent->phy_valid_port_range[phy_index].max_index = phy_index;
+ break;
+ }
+ }
+ }
+
+ return sci_port_configuration_agent_validate_ports(ihost, port_agent);
+}
+
+static void sci_apc_agent_configure_ports(struct isci_host *ihost,
+ struct sci_port_configuration_agent *port_agent,
+ struct isci_phy *iphy,
+ bool start_timer)
+{
+ u8 port_index;
+ enum sci_status status;
+ struct isci_port *iport;
+ enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY;
+
+ iport = sci_port_configuration_agent_find_port(ihost, iphy);
+
+ if (iport) {
+ if (sci_port_is_valid_phy_assignment(iport, iphy->phy_index))
+ apc_activity = SCIC_SDS_APC_ADD_PHY;
+ else
+ apc_activity = SCIC_SDS_APC_SKIP_PHY;
+ } else {
+ /*
+ * There is no matching Port for this PHY so lets search through the
+ * Ports and see if we can add the PHY to its own port or maybe start
+ * the timer and wait to see if a wider port can be made.
+ *
+ * Note the break when we reach the condition of the port id == phy id */
+ for (port_index = port_agent->phy_valid_port_range[iphy->phy_index].min_index;
+ port_index <= port_agent->phy_valid_port_range[iphy->phy_index].max_index;
+ port_index++) {
+
+ iport = &ihost->ports[port_index];
+
+ /* First we must make sure that this PHY can be added to this Port. */
+ if (sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) {
+ /*
+ * Port contains a PHY with a greater PHY ID than the current
+ * PHY that has gone link up. This phy can not be part of any
+ * port so skip it and move on. */
+ if (iport->active_phy_mask > (1 << iphy->phy_index)) {
+ apc_activity = SCIC_SDS_APC_SKIP_PHY;
+ break;
+ }
+
+ /*
+ * We have reached the end of our Port list and have not found
+ * any reason why we should not either add the PHY to the port
+ * or wait for more phys to become active. */
+ if (iport->physical_port_index == iphy->phy_index) {
+ /*
+ * The Port either has no active PHYs.
+ * Consider that if the port had any active PHYs we would have
+ * or active PHYs with
+ * a lower PHY Id than this PHY. */
+ if (apc_activity != SCIC_SDS_APC_START_TIMER) {
+ apc_activity = SCIC_SDS_APC_ADD_PHY;
+ }
+
+ break;
+ }
+
+ /*
+ * The current Port has no active PHYs and this PHY could be part
+ * of this Port. Since we dont know as yet setup to start the
+ * timer and see if there is a better configuration. */
+ if (iport->active_phy_mask == 0) {
+ apc_activity = SCIC_SDS_APC_START_TIMER;
+ }
+ } else if (iport->active_phy_mask != 0) {
+ /*
+ * The Port has an active phy and the current Phy can not
+ * participate in this port so skip the PHY and see if
+ * there is a better configuration. */
+ apc_activity = SCIC_SDS_APC_SKIP_PHY;
+ }
+ }
+ }
+
+ /*
+ * Check to see if the start timer operations should instead map to an
+ * add phy operation. This is caused because we have been waiting to
+ * add a phy to a port but could not becuase the automatic port
+ * configuration engine had a choice of possible ports for the phy.
+ * Since we have gone through a timeout we are going to restrict the
+ * choice to the smallest possible port. */
+ if (
+ (start_timer == false)
+ && (apc_activity == SCIC_SDS_APC_START_TIMER)
+ ) {
+ apc_activity = SCIC_SDS_APC_ADD_PHY;
+ }
+
+ switch (apc_activity) {
+ case SCIC_SDS_APC_ADD_PHY:
+ status = sci_port_add_phy(iport, iphy);
+
+ if (status == SCI_SUCCESS) {
+ port_agent->phy_configured_mask |= (1 << iphy->phy_index);
+ }
+ break;
+
+ case SCIC_SDS_APC_START_TIMER:
+ /*
+ * This can occur for either a link down event, or a link
+ * up event where we cannot yet tell the port to which a
+ * phy belongs.
+ */
+ if (port_agent->timer_pending)
+ sci_del_timer(&port_agent->timer);
+
+ port_agent->timer_pending = true;
+ sci_mod_timer(&port_agent->timer,
+ SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION);
+ break;
+
+ case SCIC_SDS_APC_SKIP_PHY:
+ default:
+ /* do nothing the PHY can not be made part of a port at this time. */
+ break;
+ }
+}
+
+/**
+ * sci_apc_agent_link_up - handle apc link up events
+ * @scic: This is the controller object that receives the link up
+ * notification.
+ * @sci_port: This is the port object associated with the phy. If the is no
+ * associated port this is an NULL.
+ * @sci_phy: This is the phy object which has gone link up.
+ *
+ * This method handles the automatic port configuration for link up
+ * notifications. Is it possible to get a link down notification from a phy
+ * that has no assocoated port?
+ */
+static void sci_apc_agent_link_up(struct isci_host *ihost,
+ struct sci_port_configuration_agent *port_agent,
+ struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ u8 phy_index = iphy->phy_index;
+
+ if (!iport) {
+ /* the phy is not the part of this port */
+ port_agent->phy_ready_mask |= 1 << phy_index;
+ sci_apc_agent_configure_ports(ihost, port_agent, iphy, true);
+ } else {
+ /* the phy is already the part of the port */
+ u32 port_state = iport->sm.current_state_id;
+
+ /* if the PORT'S state is resetting then the link up is from
+ * port hard reset in this case, we need to tell the port
+ * that link up is recieved
+ */
+ BUG_ON(port_state != SCI_PORT_RESETTING);
+ port_agent->phy_ready_mask |= 1 << phy_index;
+ sci_port_link_up(iport, iphy);
+ }
+}
+
+/**
+ *
+ * @controller: This is the controller object that receives the link down
+ * notification.
+ * @iport: This is the port object associated with the phy. If the is no
+ * associated port this is an NULL.
+ * @iphy: This is the phy object which has gone link down.
+ *
+ * This method handles the automatic port configuration link down
+ * notifications. not associated with a port there is no action taken. Is it
+ * possible to get a link down notification from a phy that has no assocoated
+ * port?
+ */
+static void sci_apc_agent_link_down(
+ struct isci_host *ihost,
+ struct sci_port_configuration_agent *port_agent,
+ struct isci_port *iport,
+ struct isci_phy *iphy)
+{
+ port_agent->phy_ready_mask &= ~(1 << iphy->phy_index);
+
+ if (!iport)
+ return;
+ if (port_agent->phy_configured_mask & (1 << iphy->phy_index)) {
+ enum sci_status status;
+
+ status = sci_port_remove_phy(iport, iphy);
+
+ if (status == SCI_SUCCESS)
+ port_agent->phy_configured_mask &= ~(1 << iphy->phy_index);
+ }
+}
+
+/* configure the phys into ports when the timer fires */
+static void apc_agent_timeout(unsigned long data)
+{
+ u32 index;
+ struct sci_timer *tmr = (struct sci_timer *)data;
+ struct sci_port_configuration_agent *port_agent;
+ struct isci_host *ihost;
+ unsigned long flags;
+ u16 configure_phy_mask;
+
+ port_agent = container_of(tmr, typeof(*port_agent), timer);
+ ihost = container_of(port_agent, typeof(*ihost), port_agent);
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (tmr->cancel)
+ goto done;
+
+ port_agent->timer_pending = false;
+
+ configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask;
+
+ if (!configure_phy_mask)
+ return;
+
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ if ((configure_phy_mask & (1 << index)) == 0)
+ continue;
+
+ sci_apc_agent_configure_ports(ihost, port_agent,
+ &ihost->phys[index], false);
+ }
+
+done:
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
+
+/*
+ * ******************************************************************************
+ * Public port configuration agent routines
+ * ****************************************************************************** */
+
+/**
+ *
+ *
+ * This method will construct the port configuration agent for operation. This
+ * call is universal for both manual port configuration and automatic port
+ * configuration modes.
+ */
+void sci_port_configuration_agent_construct(
+ struct sci_port_configuration_agent *port_agent)
+{
+ u32 index;
+
+ port_agent->phy_configured_mask = 0x00;
+ port_agent->phy_ready_mask = 0x00;
+
+ port_agent->link_up_handler = NULL;
+ port_agent->link_down_handler = NULL;
+
+ port_agent->timer_pending = false;
+
+ for (index = 0; index < SCI_MAX_PORTS; index++) {
+ port_agent->phy_valid_port_range[index].min_index = 0;
+ port_agent->phy_valid_port_range[index].max_index = 0;
+ }
+}
+
+enum sci_status sci_port_configuration_agent_initialize(
+ struct isci_host *ihost,
+ struct sci_port_configuration_agent *port_agent)
+{
+ enum sci_status status;
+ enum sci_port_configuration_mode mode;
+
+ mode = ihost->oem_parameters.controller.mode_type;
+
+ if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
+ status = sci_mpc_agent_validate_phy_configuration(
+ ihost, port_agent);
+
+ port_agent->link_up_handler = sci_mpc_agent_link_up;
+ port_agent->link_down_handler = sci_mpc_agent_link_down;
+
+ sci_init_timer(&port_agent->timer, mpc_agent_timeout);
+ } else {
+ status = sci_apc_agent_validate_phy_configuration(
+ ihost, port_agent);
+
+ port_agent->link_up_handler = sci_apc_agent_link_up;
+ port_agent->link_down_handler = sci_apc_agent_link_down;
+
+ sci_init_timer(&port_agent->timer, apc_agent_timeout);
+ }
+
+ return status;
+}
diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c
new file mode 100644
index 0000000..b5f4341
--- /dev/null
+++ b/drivers/scsi/isci/probe_roms.c
@@ -0,0 +1,243 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ */
+
+/* probe_roms - scan for oem parameters */
+
+#include <linux/kernel.h>
+#include <linux/firmware.h>
+#include <linux/uaccess.h>
+#include <linux/efi.h>
+#include <asm/probe_roms.h>
+
+#include "isci.h"
+#include "task.h"
+#include "probe_roms.h"
+
+static efi_char16_t isci_efivar_name[] = {
+ 'R', 's', 't', 'S', 'c', 'u', 'O'
+};
+
+struct isci_orom *isci_request_oprom(struct pci_dev *pdev)
+{
+ void __iomem *oprom = pci_map_biosrom(pdev);
+ struct isci_orom *rom = NULL;
+ size_t len, i;
+ int j;
+ char oem_sig[4];
+ struct isci_oem_hdr oem_hdr;
+ u8 *tmp, sum;
+
+ if (!oprom)
+ return NULL;
+
+ len = pci_biosrom_size(pdev);
+ rom = devm_kzalloc(&pdev->dev, sizeof(*rom), GFP_KERNEL);
+ if (!rom) {
+ dev_warn(&pdev->dev,
+ "Unable to allocate memory for orom\n");
+ return NULL;
+ }
+
+ for (i = 0; i < len && rom; i += ISCI_OEM_SIG_SIZE) {
+ memcpy_fromio(oem_sig, oprom + i, ISCI_OEM_SIG_SIZE);
+
+ /* we think we found the OEM table */
+ if (memcmp(oem_sig, ISCI_OEM_SIG, ISCI_OEM_SIG_SIZE) == 0) {
+ size_t copy_len;
+
+ memcpy_fromio(&oem_hdr, oprom + i, sizeof(oem_hdr));
+
+ copy_len = min(oem_hdr.len - sizeof(oem_hdr),
+ sizeof(*rom));
+
+ memcpy_fromio(rom,
+ oprom + i + sizeof(oem_hdr),
+ copy_len);
+
+ /* calculate checksum */
+ tmp = (u8 *)&oem_hdr;
+ for (j = 0, sum = 0; j < sizeof(oem_hdr); j++, tmp++)
+ sum += *tmp;
+
+ tmp = (u8 *)rom;
+ for (j = 0; j < sizeof(*rom); j++, tmp++)
+ sum += *tmp;
+
+ if (sum != 0) {
+ dev_warn(&pdev->dev,
+ "OEM table checksum failed\n");
+ continue;
+ }
+
+ /* keep going if that's not the oem param table */
+ if (memcmp(rom->hdr.signature,
+ ISCI_ROM_SIG,
+ ISCI_ROM_SIG_SIZE) != 0)
+ continue;
+
+ dev_info(&pdev->dev,
+ "OEM parameter table found in OROM\n");
+ break;
+ }
+ }
+
+ if (i >= len) {
+ dev_err(&pdev->dev, "oprom parse error\n");
+ devm_kfree(&pdev->dev, rom);
+ rom = NULL;
+ }
+ pci_unmap_biosrom(oprom);
+
+ return rom;
+}
+
+enum sci_status isci_parse_oem_parameters(struct sci_oem_params *oem,
+ struct isci_orom *orom, int scu_index)
+{
+ /* check for valid inputs */
+ if (scu_index < 0 || scu_index >= SCI_MAX_CONTROLLERS ||
+ scu_index > orom->hdr.num_elements || !oem)
+ return -EINVAL;
+
+ *oem = orom->ctrl[scu_index];
+ return 0;
+}
+
+struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw)
+{
+ struct isci_orom *orom = NULL, *data;
+ int i, j;
+
+ if (request_firmware(&fw, ISCI_FW_NAME, &pdev->dev) != 0)
+ return NULL;
+
+ if (fw->size < sizeof(*orom))
+ goto out;
+
+ data = (struct isci_orom *)fw->data;
+
+ if (strncmp(ISCI_ROM_SIG, data->hdr.signature,
+ strlen(ISCI_ROM_SIG)) != 0)
+ goto out;
+
+ orom = devm_kzalloc(&pdev->dev, fw->size, GFP_KERNEL);
+ if (!orom)
+ goto out;
+
+ memcpy(orom, fw->data, fw->size);
+
+ if (is_c0(pdev))
+ goto out;
+
+ /*
+ * deprecated: override default amp_control for pre-preproduction
+ * silicon revisions
+ */
+ for (i = 0; i < ARRAY_SIZE(orom->ctrl); i++)
+ for (j = 0; j < ARRAY_SIZE(orom->ctrl[i].phys); j++) {
+ orom->ctrl[i].phys[j].afe_tx_amp_control0 = 0xe7c03;
+ orom->ctrl[i].phys[j].afe_tx_amp_control1 = 0xe7c03;
+ orom->ctrl[i].phys[j].afe_tx_amp_control2 = 0xe7c03;
+ orom->ctrl[i].phys[j].afe_tx_amp_control3 = 0xe7c03;
+ }
+ out:
+ release_firmware(fw);
+
+ return orom;
+}
+
+static struct efi *get_efi(void)
+{
+#ifdef CONFIG_EFI
+ return &efi;
+#else
+ return NULL;
+#endif
+}
+
+struct isci_orom *isci_get_efi_var(struct pci_dev *pdev)
+{
+ efi_status_t status;
+ struct isci_orom *rom;
+ struct isci_oem_hdr *oem_hdr;
+ u8 *tmp, sum;
+ int j;
+ unsigned long data_len;
+ u8 *efi_data;
+ u32 efi_attrib = 0;
+
+ data_len = 1024;
+ efi_data = devm_kzalloc(&pdev->dev, data_len, GFP_KERNEL);
+ if (!efi_data) {
+ dev_warn(&pdev->dev,
+ "Unable to allocate memory for EFI data\n");
+ return NULL;
+ }
+
+ rom = (struct isci_orom *)(efi_data + sizeof(struct isci_oem_hdr));
+
+ if (get_efi())
+ status = get_efi()->get_variable(isci_efivar_name,
+ &ISCI_EFI_VENDOR_GUID,
+ &efi_attrib,
+ &data_len,
+ efi_data);
+ else
+ status = EFI_NOT_FOUND;
+
+ if (status != EFI_SUCCESS) {
+ dev_warn(&pdev->dev,
+ "Unable to obtain EFI var data for OEM parms\n");
+ return NULL;
+ }
+
+ oem_hdr = (struct isci_oem_hdr *)efi_data;
+
+ if (memcmp(oem_hdr->sig, ISCI_OEM_SIG, ISCI_OEM_SIG_SIZE) != 0) {
+ dev_warn(&pdev->dev,
+ "Invalid OEM header signature\n");
+ return NULL;
+ }
+
+ /* calculate checksum */
+ tmp = (u8 *)efi_data;
+ for (j = 0, sum = 0; j < (sizeof(*oem_hdr) + sizeof(*rom)); j++, tmp++)
+ sum += *tmp;
+
+ if (sum != 0) {
+ dev_warn(&pdev->dev,
+ "OEM table checksum failed\n");
+ return NULL;
+ }
+
+ if (memcmp(rom->hdr.signature,
+ ISCI_ROM_SIG,
+ ISCI_ROM_SIG_SIZE) != 0) {
+ dev_warn(&pdev->dev,
+ "Invalid OEM table signature\n");
+ return NULL;
+ }
+
+ return rom;
+}
diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h
new file mode 100644
index 0000000..dc007e6
--- /dev/null
+++ b/drivers/scsi/isci/probe_roms.h
@@ -0,0 +1,249 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _ISCI_PROBE_ROMS_H_
+#define _ISCI_PROBE_ROMS_H_
+
+#ifdef __KERNEL__
+#include <linux/firmware.h>
+#include <linux/pci.h>
+#include <linux/efi.h>
+#include "isci.h"
+
+#define SCIC_SDS_PARM_NO_SPEED 0
+
+/* generation 1 (i.e. 1.5 Gb/s) */
+#define SCIC_SDS_PARM_GEN1_SPEED 1
+
+/* generation 2 (i.e. 3.0 Gb/s) */
+#define SCIC_SDS_PARM_GEN2_SPEED 2
+
+/* generation 3 (i.e. 6.0 Gb/s) */
+#define SCIC_SDS_PARM_GEN3_SPEED 3
+#define SCIC_SDS_PARM_MAX_SPEED SCIC_SDS_PARM_GEN3_SPEED
+
+/* parameters that can be set by module parameters */
+struct sci_user_parameters {
+ struct sci_phy_user_params {
+ /**
+ * This field specifies the NOTIFY (ENABLE SPIN UP) primitive
+ * insertion frequency for this phy index.
+ */
+ u32 notify_enable_spin_up_insertion_frequency;
+
+ /**
+ * This method specifies the number of transmitted DWORDs within which
+ * to transmit a single ALIGN primitive. This value applies regardless
+ * of what type of device is attached or connection state. A value of
+ * 0 indicates that no ALIGN primitives will be inserted.
+ */
+ u16 align_insertion_frequency;
+
+ /**
+ * This method specifies the number of transmitted DWORDs within which
+ * to transmit 2 ALIGN primitives. This applies for SAS connections
+ * only. A minimum value of 3 is required for this field.
+ */
+ u16 in_connection_align_insertion_frequency;
+
+ /**
+ * This field indicates the maximum speed generation to be utilized
+ * by phys in the supplied port.
+ * - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s).
+ * - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s).
+ * - A value of 3 indicates generation 3 (i.e. 6.0 Gb/s).
+ */
+ u8 max_speed_generation;
+
+ } phys[SCI_MAX_PHYS];
+
+ /**
+ * This field specifies the maximum number of direct attached devices
+ * that can have power supplied to them simultaneously.
+ */
+ u8 max_number_concurrent_device_spin_up;
+
+ /**
+ * This field specifies the number of seconds to allow a phy to consume
+ * power before yielding to another phy.
+ *
+ */
+ u8 phy_spin_up_delay_interval;
+
+ /**
+ * These timer values specifies how long a link will remain open with no
+ * activity in increments of a microsecond, it can be in increments of
+ * 100 microseconds if the upper most bit is set.
+ *
+ */
+ u16 stp_inactivity_timeout;
+ u16 ssp_inactivity_timeout;
+
+ /**
+ * These timer values specifies how long a link will remain open in increments
+ * of 100 microseconds.
+ *
+ */
+ u16 stp_max_occupancy_timeout;
+ u16 ssp_max_occupancy_timeout;
+
+ /**
+ * This timer value specifies how long a link will remain open with no
+ * outbound traffic in increments of a microsecond.
+ *
+ */
+ u8 no_outbound_task_timeout;
+
+};
+
+#define SCIC_SDS_PARM_PHY_MASK_MIN 0x0
+#define SCIC_SDS_PARM_PHY_MASK_MAX 0xF
+#define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4
+
+struct sci_oem_params;
+int sci_oem_parameters_validate(struct sci_oem_params *oem);
+
+struct isci_orom;
+struct isci_orom *isci_request_oprom(struct pci_dev *pdev);
+enum sci_status isci_parse_oem_parameters(struct sci_oem_params *oem,
+ struct isci_orom *orom, int scu_index);
+struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw);
+struct isci_orom *isci_get_efi_var(struct pci_dev *pdev);
+
+struct isci_oem_hdr {
+ u8 sig[4];
+ u8 rev_major;
+ u8 rev_minor;
+ u16 len;
+ u8 checksum;
+ u8 reserved1;
+ u16 reserved2;
+} __attribute__ ((packed));
+
+#else
+#define SCI_MAX_PORTS 4
+#define SCI_MAX_PHYS 4
+#define SCI_MAX_CONTROLLERS 2
+#endif
+
+#define ISCI_FW_NAME "isci/isci_firmware.bin"
+
+#define ROMSIGNATURE 0xaa55
+
+#define ISCI_OEM_SIG "$OEM"
+#define ISCI_OEM_SIG_SIZE 4
+#define ISCI_ROM_SIG "ISCUOEMB"
+#define ISCI_ROM_SIG_SIZE 8
+
+#define ISCI_EFI_VENDOR_GUID \
+ EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, \
+ 0x1a, 0x04, 0xc6)
+#define ISCI_EFI_VAR_NAME "RstScuO"
+
+/* Allowed PORT configuration modes APC Automatic PORT configuration mode is
+ * defined by the OEM configuration parameters providing no PHY_MASK parameters
+ * for any PORT. i.e. There are no phys assigned to any of the ports at start.
+ * MPC Manual PORT configuration mode is defined by the OEM configuration
+ * parameters providing a PHY_MASK value for any PORT. It is assumed that any
+ * PORT with no PHY_MASK is an invalid port and not all PHYs must be assigned.
+ * A PORT_PHY mask that assigns just a single PHY to a port and no other PHYs
+ * being assigned is sufficient to declare manual PORT configuration.
+ */
+enum sci_port_configuration_mode {
+ SCIC_PORT_MANUAL_CONFIGURATION_MODE = 0,
+ SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 1
+};
+
+struct sci_bios_oem_param_block_hdr {
+ uint8_t signature[ISCI_ROM_SIG_SIZE];
+ uint16_t total_block_length;
+ uint8_t hdr_length;
+ uint8_t version;
+ uint8_t preboot_source;
+ uint8_t num_elements;
+ uint16_t element_length;
+ uint8_t reserved[8];
+} __attribute__ ((packed));
+
+struct sci_oem_params {
+ struct {
+ uint8_t mode_type;
+ uint8_t max_concurrent_dev_spin_up;
+ uint8_t do_enable_ssc;
+ uint8_t reserved;
+ } controller;
+
+ struct {
+ uint8_t phy_mask;
+ } ports[SCI_MAX_PORTS];
+
+ struct sci_phy_oem_params {
+ struct {
+ uint32_t high;
+ uint32_t low;
+ } sas_address;
+
+ uint32_t afe_tx_amp_control0;
+ uint32_t afe_tx_amp_control1;
+ uint32_t afe_tx_amp_control2;
+ uint32_t afe_tx_amp_control3;
+ } phys[SCI_MAX_PHYS];
+} __attribute__ ((packed));
+
+struct isci_orom {
+ struct sci_bios_oem_param_block_hdr hdr;
+ struct sci_oem_params ctrl[SCI_MAX_CONTROLLERS];
+} __attribute__ ((packed));
+
+#endif
diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h
new file mode 100644
index 0000000..9b266c7
--- /dev/null
+++ b/drivers/scsi/isci/registers.h
@@ -0,0 +1,1934 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SCU_REGISTERS_H_
+#define _SCU_REGISTERS_H_
+
+/**
+ * This file contains the constants and structures for the SCU memory mapped
+ * registers.
+ *
+ *
+ */
+
+#define SCU_VIIT_ENTRY_ID_MASK (0xC0000000)
+#define SCU_VIIT_ENTRY_ID_SHIFT (30)
+
+#define SCU_VIIT_ENTRY_FUNCTION_MASK (0x0FF00000)
+#define SCU_VIIT_ENTRY_FUNCTION_SHIFT (20)
+
+#define SCU_VIIT_ENTRY_IPPTMODE_MASK (0x0001F800)
+#define SCU_VIIT_ENTRY_IPPTMODE_SHIFT (12)
+
+#define SCU_VIIT_ENTRY_LPVIE_MASK (0x00000F00)
+#define SCU_VIIT_ENTRY_LPVIE_SHIFT (8)
+
+#define SCU_VIIT_ENTRY_STATUS_MASK (0x000000FF)
+#define SCU_VIIT_ENTRY_STATUS_SHIFT (0)
+
+#define SCU_VIIT_ENTRY_ID_INVALID (0 << SCU_VIIT_ENTRY_ID_SHIFT)
+#define SCU_VIIT_ENTRY_ID_VIIT (1 << SCU_VIIT_ENTRY_ID_SHIFT)
+#define SCU_VIIT_ENTRY_ID_IIT (2 << SCU_VIIT_ENTRY_ID_SHIFT)
+#define SCU_VIIT_ENTRY_ID_VIRT_EXP (3 << SCU_VIIT_ENTRY_ID_SHIFT)
+
+#define SCU_VIIT_IPPT_SSP_INITIATOR (0x01 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT)
+#define SCU_VIIT_IPPT_SMP_INITIATOR (0x02 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT)
+#define SCU_VIIT_IPPT_STP_INITIATOR (0x04 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT)
+#define SCU_VIIT_IPPT_INITIATOR \
+ (\
+ SCU_VIIT_IPPT_SSP_INITIATOR \
+ | SCU_VIIT_IPPT_SMP_INITIATOR \
+ | SCU_VIIT_IPPT_STP_INITIATOR \
+ )
+
+#define SCU_VIIT_STATUS_RNC_VALID (0x01 << SCU_VIIT_ENTRY_STATUS_SHIFT)
+#define SCU_VIIT_STATUS_ADDRESS_VALID (0x02 << SCU_VIIT_ENTRY_STATUS_SHIFT)
+#define SCU_VIIT_STATUS_RNI_VALID (0x04 << SCU_VIIT_ENTRY_STATUS_SHIFT)
+#define SCU_VIIT_STATUS_ALL_VALID \
+ (\
+ SCU_VIIT_STATUS_RNC_VALID \
+ | SCU_VIIT_STATUS_ADDRESS_VALID \
+ | SCU_VIIT_STATUS_RNI_VALID \
+ )
+
+#define SCU_VIIT_IPPT_SMP_TARGET (0x10 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT)
+
+/**
+ * struct scu_viit_entry - This is the SCU Virtual Initiator Table Entry
+ *
+ *
+ */
+struct scu_viit_entry {
+ /**
+ * This must be encoded as to the type of initiator that is being constructed
+ * for this port.
+ */
+ u32 status;
+
+ /**
+ * Virtual initiator high SAS Address
+ */
+ u32 initiator_sas_address_hi;
+
+ /**
+ * Virtual initiator low SAS Address
+ */
+ u32 initiator_sas_address_lo;
+
+ /**
+ * This must be 0
+ */
+ u32 reserved;
+
+};
+
+
+/* IIT Status Defines */
+#define SCU_IIT_ENTRY_ID_MASK (0xC0000000)
+#define SCU_IIT_ENTRY_ID_SHIFT (30)
+
+#define SCU_IIT_ENTRY_STATUS_UPDATE_MASK (0x20000000)
+#define SCU_IIT_ENTRY_STATUS_UPDATE_SHIFT (29)
+
+#define SCU_IIT_ENTRY_LPI_MASK (0x00000F00)
+#define SCU_IIT_ENTRY_LPI_SHIFT (8)
+
+#define SCU_IIT_ENTRY_STATUS_MASK (0x000000FF)
+#define SCU_IIT_ENTRY_STATUS_SHIFT (0)
+
+/* IIT Remote Initiator Defines */
+#define SCU_IIT_ENTRY_REMOTE_TAG_MASK (0x0000FFFF)
+#define SCU_IIT_ENTRY_REMOTE_TAG_SHIFT (0)
+
+#define SCU_IIT_ENTRY_REMOTE_RNC_MASK (0x0FFF0000)
+#define SCU_IIT_ENTRY_REMOTE_RNC_SHIFT (16)
+
+#define SCU_IIT_ENTRY_ID_INVALID (0 << SCU_IIT_ENTRY_ID_SHIFT)
+#define SCU_IIT_ENTRY_ID_VIIT (1 << SCU_IIT_ENTRY_ID_SHIFT)
+#define SCU_IIT_ENTRY_ID_IIT (2 << SCU_IIT_ENTRY_ID_SHIFT)
+#define SCU_IIT_ENTRY_ID_VIRT_EXP (3 << SCU_IIT_ENTRY_ID_SHIFT)
+
+/**
+ * struct scu_iit_entry - This will be implemented later when we support
+ * virtual functions
+ *
+ *
+ */
+struct scu_iit_entry {
+ u32 status;
+ u32 remote_initiator_sas_address_hi;
+ u32 remote_initiator_sas_address_lo;
+ u32 remote_initiator;
+
+};
+
+/* Generate a value for an SCU register */
+#define SCU_GEN_VALUE(name, value) \
+ (((value) << name ## _SHIFT) & (name ## _MASK))
+
+/*
+ * Generate a bit value for an SCU register
+ * Make sure that the register MASK is just a single bit */
+#define SCU_GEN_BIT(name) \
+ SCU_GEN_VALUE(name, ((u32)1))
+
+#define SCU_SET_BIT(name, reg_value) \
+ ((reg_value) | SCU_GEN_BIT(name))
+
+#define SCU_CLEAR_BIT(name, reg_value) \
+ ((reg_value)$ ~(SCU_GEN_BIT(name)))
+
+/*
+ * *****************************************************************************
+ * Unions for bitfield definitions of SCU Registers
+ * SMU Post Context Port
+ * ***************************************************************************** */
+#define SMU_POST_CONTEXT_PORT_CONTEXT_INDEX_SHIFT (0)
+#define SMU_POST_CONTEXT_PORT_CONTEXT_INDEX_MASK (0x00000FFF)
+#define SMU_POST_CONTEXT_PORT_LOGICAL_PORT_INDEX_SHIFT (12)
+#define SMU_POST_CONTEXT_PORT_LOGICAL_PORT_INDEX_MASK (0x0000F000)
+#define SMU_POST_CONTEXT_PORT_PROTOCOL_ENGINE_SHIFT (16)
+#define SMU_POST_CONTEXT_PORT_PROTOCOL_ENGINE_MASK (0x00030000)
+#define SMU_POST_CONTEXT_PORT_COMMAND_CONTEXT_SHIFT (18)
+#define SMU_POST_CONTEXT_PORT_COMMAND_CONTEXT_MASK (0x00FC0000)
+#define SMU_POST_CONTEXT_PORT_RESERVED_MASK (0xFF000000)
+
+#define SMU_PCP_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SMU_POST_CONTEXT_PORT_ ## name, value)
+
+/* ***************************************************************************** */
+#define SMU_INTERRUPT_STATUS_COMPLETION_SHIFT (31)
+#define SMU_INTERRUPT_STATUS_COMPLETION_MASK (0x80000000)
+#define SMU_INTERRUPT_STATUS_QUEUE_SUSPEND_SHIFT (1)
+#define SMU_INTERRUPT_STATUS_QUEUE_SUSPEND_MASK (0x00000002)
+#define SMU_INTERRUPT_STATUS_QUEUE_ERROR_SHIFT (0)
+#define SMU_INTERRUPT_STATUS_QUEUE_ERROR_MASK (0x00000001)
+#define SMU_INTERRUPT_STATUS_RESERVED_MASK (0x7FFFFFFC)
+
+#define SMU_ISR_GEN_BIT(name) \
+ SCU_GEN_BIT(SMU_INTERRUPT_STATUS_ ## name)
+
+#define SMU_ISR_QUEUE_ERROR SMU_ISR_GEN_BIT(QUEUE_ERROR)
+#define SMU_ISR_QUEUE_SUSPEND SMU_ISR_GEN_BIT(QUEUE_SUSPEND)
+#define SMU_ISR_COMPLETION SMU_ISR_GEN_BIT(COMPLETION)
+
+/* ***************************************************************************** */
+#define SMU_INTERRUPT_MASK_COMPLETION_SHIFT (31)
+#define SMU_INTERRUPT_MASK_COMPLETION_MASK (0x80000000)
+#define SMU_INTERRUPT_MASK_QUEUE_SUSPEND_SHIFT (1)
+#define SMU_INTERRUPT_MASK_QUEUE_SUSPEND_MASK (0x00000002)
+#define SMU_INTERRUPT_MASK_QUEUE_ERROR_SHIFT (0)
+#define SMU_INTERRUPT_MASK_QUEUE_ERROR_MASK (0x00000001)
+#define SMU_INTERRUPT_MASK_RESERVED_MASK (0x7FFFFFFC)
+
+#define SMU_IMR_GEN_BIT(name) \
+ SCU_GEN_BIT(SMU_INTERRUPT_MASK_ ## name)
+
+#define SMU_IMR_QUEUE_ERROR SMU_IMR_GEN_BIT(QUEUE_ERROR)
+#define SMU_IMR_QUEUE_SUSPEND SMU_IMR_GEN_BIT(QUEUE_SUSPEND)
+#define SMU_IMR_COMPLETION SMU_IMR_GEN_BIT(COMPLETION)
+
+/* ***************************************************************************** */
+#define SMU_INTERRUPT_COALESCING_CONTROL_TIMER_SHIFT (0)
+#define SMU_INTERRUPT_COALESCING_CONTROL_TIMER_MASK (0x0000001F)
+#define SMU_INTERRUPT_COALESCING_CONTROL_NUMBER_SHIFT (8)
+#define SMU_INTERRUPT_COALESCING_CONTROL_NUMBER_MASK (0x0000FF00)
+#define SMU_INTERRUPT_COALESCING_CONTROL_RESERVED_MASK (0xFFFF00E0)
+
+#define SMU_ICC_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SMU_INTERRUPT_COALESCING_CONTROL_ ## name, value)
+
+/* ***************************************************************************** */
+#define SMU_TASK_CONTEXT_RANGE_START_SHIFT (0)
+#define SMU_TASK_CONTEXT_RANGE_START_MASK (0x00000FFF)
+#define SMU_TASK_CONTEXT_RANGE_ENDING_SHIFT (16)
+#define SMU_TASK_CONTEXT_RANGE_ENDING_MASK (0x0FFF0000)
+#define SMU_TASK_CONTEXT_RANGE_ENABLE_SHIFT (31)
+#define SMU_TASK_CONTEXT_RANGE_ENABLE_MASK (0x80000000)
+#define SMU_TASK_CONTEXT_RANGE_RESERVED_MASK (0x7000F000)
+
+#define SMU_TCR_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SMU_TASK_CONTEXT_RANGE_ ## name, value)
+
+#define SMU_TCR_GEN_BIT(name, value) \
+ SCU_GEN_BIT(SMU_TASK_CONTEXT_RANGE_ ## name)
+
+/* ***************************************************************************** */
+
+#define SMU_COMPLETION_QUEUE_PUT_POINTER_SHIFT (0)
+#define SMU_COMPLETION_QUEUE_PUT_POINTER_MASK (0x00003FFF)
+#define SMU_COMPLETION_QUEUE_PUT_CYCLE_BIT_SHIFT (15)
+#define SMU_COMPLETION_QUEUE_PUT_CYCLE_BIT_MASK (0x00008000)
+#define SMU_COMPLETION_QUEUE_PUT_EVENT_POINTER_SHIFT (16)
+#define SMU_COMPLETION_QUEUE_PUT_EVENT_POINTER_MASK (0x03FF0000)
+#define SMU_COMPLETION_QUEUE_PUT_EVENT_CYCLE_BIT_SHIFT (26)
+#define SMU_COMPLETION_QUEUE_PUT_EVENT_CYCLE_BIT_MASK (0x04000000)
+#define SMU_COMPLETION_QUEUE_PUT_RESERVED_MASK (0xF8004000)
+
+#define SMU_CQPR_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_PUT_ ## name, value)
+
+#define SMU_CQPR_GEN_BIT(name) \
+ SCU_GEN_BIT(SMU_COMPLETION_QUEUE_PUT_ ## name)
+
+/* ***************************************************************************** */
+
+#define SMU_COMPLETION_QUEUE_GET_POINTER_SHIFT (0)
+#define SMU_COMPLETION_QUEUE_GET_POINTER_MASK (0x00003FFF)
+#define SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT (15)
+#define SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_MASK (0x00008000)
+#define SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT (16)
+#define SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK (0x03FF0000)
+#define SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT (26)
+#define SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_MASK (0x04000000)
+#define SMU_COMPLETION_QUEUE_GET_ENABLE_SHIFT (30)
+#define SMU_COMPLETION_QUEUE_GET_ENABLE_MASK (0x40000000)
+#define SMU_COMPLETION_QUEUE_GET_EVENT_ENABLE_SHIFT (31)
+#define SMU_COMPLETION_QUEUE_GET_EVENT_ENABLE_MASK (0x80000000)
+#define SMU_COMPLETION_QUEUE_GET_RESERVED_MASK (0x38004000)
+
+#define SMU_CQGR_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_GET_ ## name, value)
+
+#define SMU_CQGR_GEN_BIT(name) \
+ SCU_GEN_BIT(SMU_COMPLETION_QUEUE_GET_ ## name)
+
+#define SMU_CQGR_CYCLE_BIT \
+ SMU_CQGR_GEN_BIT(CYCLE_BIT)
+
+#define SMU_CQGR_EVENT_CYCLE_BIT \
+ SMU_CQGR_GEN_BIT(EVENT_CYCLE_BIT)
+
+#define SMU_CQGR_GET_POINTER_SET(value) \
+ SMU_CQGR_GEN_VAL(POINTER, value)
+
+
+/* ***************************************************************************** */
+#define SMU_COMPLETION_QUEUE_CONTROL_QUEUE_LIMIT_SHIFT (0)
+#define SMU_COMPLETION_QUEUE_CONTROL_QUEUE_LIMIT_MASK (0x00003FFF)
+#define SMU_COMPLETION_QUEUE_CONTROL_EVENT_LIMIT_SHIFT (16)
+#define SMU_COMPLETION_QUEUE_CONTROL_EVENT_LIMIT_MASK (0x03FF0000)
+#define SMU_COMPLETION_QUEUE_CONTROL_RESERVED_MASK (0xFC00C000)
+
+#define SMU_CQC_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_CONTROL_ ## name, value)
+
+#define SMU_CQC_QUEUE_LIMIT_SET(value) \
+ SMU_CQC_GEN_VAL(QUEUE_LIMIT, value)
+
+#define SMU_CQC_EVENT_LIMIT_SET(value) \
+ SMU_CQC_GEN_VAL(EVENT_LIMIT, value)
+
+
+/* ***************************************************************************** */
+#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT (0)
+#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK (0x00000FFF)
+#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT (12)
+#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK (0x00007000)
+#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT (15)
+#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK (0x07FF8000)
+#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_SHIFT (27)
+#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_MASK (0x08000000)
+#define SMU_DEVICE_CONTEXT_CAPACITY_RESERVED_MASK (0xF0000000)
+
+#define SMU_DCC_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SMU_DEVICE_CONTEXT_CAPACITY_ ## name, value)
+
+#define SMU_DCC_GET_MAX_PEG(value) \
+ (\
+ ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT \
+ )
+
+#define SMU_DCC_GET_MAX_LP(value) \
+ (\
+ ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT \
+ )
+
+#define SMU_DCC_GET_MAX_TC(value) \
+ (\
+ ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT \
+ )
+
+#define SMU_DCC_GET_MAX_RNC(value) \
+ (\
+ ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \
+ >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT \
+ )
+
+/* -------------------------------------------------------------------------- */
+
+#define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_SHIFT (0)
+#define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_MASK (0x00000001)
+#define SMU_CONTROL_STATUS_COMPLETION_BYTE_SWAP_ENABLE_SHIFT (1)
+#define SMU_CONTROL_STATUS_COMPLETION_BYTE_SWAP_ENABLE_MASK (0x00000002)
+#define SMU_CONTROL_STATUS_CONTEXT_RAM_INIT_COMPLETED_SHIFT (16)
+#define SMU_CONTROL_STATUS_CONTEXT_RAM_INIT_COMPLETED_MASK (0x00010000)
+#define SMU_CONTROL_STATUS_SCHEDULER_RAM_INIT_COMPLETED_SHIFT (17)
+#define SMU_CONTROL_STATUS_SCHEDULER_RAM_INIT_COMPLETED_MASK (0x00020000)
+#define SMU_CONTROL_STATUS_RESERVED_MASK (0xFFFCFFFC)
+
+#define SMU_SMUCSR_GEN_BIT(name) \
+ SCU_GEN_BIT(SMU_CONTROL_STATUS_ ## name)
+
+#define SMU_SMUCSR_SCHEDULER_RAM_INIT_COMPLETED \
+ (SMU_SMUCSR_GEN_BIT(SCHEDULER_RAM_INIT_COMPLETED))
+
+#define SMU_SMUCSR_CONTEXT_RAM_INIT_COMPLETED \
+ (SMU_SMUCSR_GEN_BIT(CONTEXT_RAM_INIT_COMPLETED))
+
+#define SCU_RAM_INIT_COMPLETED \
+ (\
+ SMU_SMUCSR_CONTEXT_RAM_INIT_COMPLETED \
+ | SMU_SMUCSR_SCHEDULER_RAM_INIT_COMPLETED \
+ )
+
+/* -------------------------------------------------------------------------- */
+
+#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE0_SHIFT (0)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE0_MASK (0x00000001)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE1_SHIFT (1)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE1_MASK (0x00000002)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE2_SHIFT (2)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE2_MASK (0x00000004)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE3_SHIFT (3)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE3_MASK (0x00000008)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE0_SHIFT (8)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE0_MASK (0x00000100)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE1_SHIFT (9)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE1_MASK (0x00000200)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE2_SHIFT (10)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE2_MASK (0x00000400)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE3_SHIFT (11)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE3_MASK (0x00000800)
+
+#define SMU_RESET_PROTOCOL_ENGINE(peg, pe) \
+ ((1 << (pe)) << ((peg) * 8))
+
+#define SMU_RESET_PEG_PROTOCOL_ENGINES(peg) \
+ (\
+ SMU_RESET_PROTOCOL_ENGINE(peg, 0) \
+ | SMU_RESET_PROTOCOL_ENGINE(peg, 1) \
+ | SMU_RESET_PROTOCOL_ENGINE(peg, 2) \
+ | SMU_RESET_PROTOCOL_ENGINE(peg, 3) \
+ )
+
+#define SMU_RESET_ALL_PROTOCOL_ENGINES() \
+ (\
+ SMU_RESET_PEG_PROTOCOL_ENGINES(0) \
+ | SMU_RESET_PEG_PROTOCOL_ENGINES(1) \
+ )
+
+#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP0_SHIFT (16)
+#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP0_MASK (0x00010000)
+#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP2_SHIFT (17)
+#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP2_MASK (0x00020000)
+#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP0_SHIFT (18)
+#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP0_MASK (0x00040000)
+#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP2_SHIFT (19)
+#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP2_MASK (0x00080000)
+
+#define SMU_RESET_WIDE_PORT_QUEUE(peg, wide_port) \
+ ((1 << ((wide_port) / 2)) << ((peg) * 2) << 16)
+
+#define SMU_SOFTRESET_CONTROL_RESET_PEG0_SHIFT (20)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG0_MASK (0x00100000)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG1_SHIFT (21)
+#define SMU_SOFTRESET_CONTROL_RESET_PEG1_MASK (0x00200000)
+#define SMU_SOFTRESET_CONTROL_RESET_SCU_SHIFT (22)
+#define SMU_SOFTRESET_CONTROL_RESET_SCU_MASK (0x00400000)
+
+/*
+ * It seems to make sense that if you are going to reset the protocol
+ * engine group that you would also reset all of the protocol engines */
+#define SMU_RESET_PROTOCOL_ENGINE_GROUP(peg) \
+ (\
+ (1 << ((peg) + 20)) \
+ | SMU_RESET_WIDE_PORT_QUEUE(peg, 0) \
+ | SMU_RESET_WIDE_PORT_QUEUE(peg, 1) \
+ | SMU_RESET_PEG_PROTOCOL_ENGINES(peg) \
+ )
+
+#define SMU_RESET_ALL_PROTOCOL_ENGINE_GROUPS() \
+ (\
+ SMU_RESET_PROTOCOL_ENGINE_GROUP(0) \
+ | SMU_RESET_PROTOCOL_ENGINE_GROUP(1) \
+ )
+
+#define SMU_RESET_SCU() (0xFFFFFFFF)
+
+
+
+/* ***************************************************************************** */
+#define SMU_TASK_CONTEXT_ASSIGNMENT_STARTING_SHIFT (0)
+#define SMU_TASK_CONTEXT_ASSIGNMENT_STARTING_MASK (0x00000FFF)
+#define SMU_TASK_CONTEXT_ASSIGNMENT_ENDING_SHIFT (16)
+#define SMU_TASK_CONTEXT_ASSIGNMENT_ENDING_MASK (0x0FFF0000)
+#define SMU_TASK_CONTEXT_ASSIGNMENT_RANGE_CHECK_ENABLE_SHIFT (31)
+#define SMU_TASK_CONTEXT_ASSIGNMENT_RANGE_CHECK_ENABLE_MASK (0x80000000)
+#define SMU_TASK_CONTEXT_ASSIGNMENT_RESERVED_MASK (0x7000F000)
+
+#define SMU_TCA_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SMU_TASK_CONTEXT_ASSIGNMENT_ ## name, value)
+
+#define SMU_TCA_GEN_BIT(name) \
+ SCU_GEN_BIT(SMU_TASK_CONTEXT_ASSIGNMENT_ ## name)
+
+/* ***************************************************************************** */
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_QUEUE_SIZE_SHIFT (0)
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_QUEUE_SIZE_MASK (0x00000FFF)
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_RESERVED_MASK (0xFFFFF000)
+
+#define SCU_UFQC_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_ ## name, value)
+
+#define SCU_UFQC_QUEUE_SIZE_SET(value) \
+ SCU_UFQC_GEN_VAL(QUEUE_SIZE, value)
+
+/* ***************************************************************************** */
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_POINTER_SHIFT (0)
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_POINTER_MASK (0x00000FFF)
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_CYCLE_BIT_SHIFT (12)
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_CYCLE_BIT_MASK (0x00001000)
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_RESERVED_MASK (0xFFFFE000)
+
+#define SCU_UFQPP_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_ ## name, value)
+
+#define SCU_UFQPP_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_ ## name)
+
+/*
+ * *****************************************************************************
+ * * SDMA Registers
+ * ***************************************************************************** */
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_POINTER_SHIFT (0)
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_POINTER_MASK (0x00000FFF)
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_CYCLE_BIT_SHIFT (12)
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_CYCLE_BIT_MASK (12)
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ENABLE_BIT_SHIFT (31)
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ENABLE_BIT_MASK (0x80000000)
+#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_RESERVED_MASK (0x7FFFE000)
+
+#define SCU_UFQGP_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ ## name, value)
+
+#define SCU_UFQGP_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ ## name)
+
+#define SCU_UFQGP_CYCLE_BIT(value) \
+ SCU_UFQGP_GEN_BIT(CYCLE_BIT, value)
+
+#define SCU_UFQGP_GET_POINTER(value) \
+ SCU_UFQGP_GEN_VALUE(POINTER, value)
+
+#define SCU_UFQGP_ENABLE(value) \
+ (SCU_UFQGP_GEN_BIT(ENABLE) | value)
+
+#define SCU_UFQGP_DISABLE(value) \
+ (~SCU_UFQGP_GEN_BIT(ENABLE) & value)
+
+#define SCU_UFQGP_VALUE(bit, value) \
+ (SCU_UFQGP_CYCLE_BIT(bit) | SCU_UFQGP_GET_POINTER(value))
+
+/* ***************************************************************************** */
+#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SHIFT (0)
+#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_MASK (0x0000FFFF)
+#define SCU_PDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_SHIFT (16)
+#define SCU_PDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_MASK (0x00010000)
+#define SCU_PDMA_CONFIGURATION_PCI_NO_SNOOP_ENABLE_SHIFT (17)
+#define SCU_PDMA_CONFIGURATION_PCI_NO_SNOOP_ENABLE_MASK (0x00020000)
+#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_BYTE_SWAP_SHIFT (18)
+#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_BYTE_SWAP_MASK (0x00040000)
+#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_SGL_FETCH_SHIFT (19)
+#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_SGL_FETCH_MASK (0x00080000)
+#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_RX_HEADER_RAM_WRITE_SHIFT (20)
+#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_RX_HEADER_RAM_WRITE_MASK (0x00100000)
+#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_UF_ADDRESS_FETCH_SHIFT (21)
+#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_UF_ADDRESS_FETCH_MASK (0x00200000)
+#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SELECT_SHIFT (22)
+#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SELECT_MASK (0x00400000)
+#define SCU_PDMA_CONFIGURATION_RESERVED_MASK (0xFF800000)
+
+#define SCU_PDMACR_GEN_VALUE(name, value) \
+ SCU_GEN_VALUE(SCU_PDMA_CONFIGURATION_ ## name, value)
+
+#define SCU_PDMACR_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_PDMA_CONFIGURATION_ ## name)
+
+#define SCU_PDMACR_BE_GEN_BIT(name) \
+ SCU_PCMACR_GEN_BIT(BIG_ENDIAN_CONTROL_ ## name)
+
+/* ***************************************************************************** */
+#define SCU_CDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_SHIFT (8)
+#define SCU_CDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_MASK (0x00000100)
+
+#define SCU_CDMACR_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_CDMA_CONFIGURATION_ ## name)
+
+/*
+ * *****************************************************************************
+ * * SCU Link Layer Registers
+ * ***************************************************************************** */
+#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_TIMEOUT_SHIFT (0)
+#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_TIMEOUT_MASK (0x000000FF)
+#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_LOCK_TIME_SHIFT (8)
+#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_LOCK_TIME_MASK (0x0000FF00)
+#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_RATE_CHANGE_DELAY_SHIFT (16)
+#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_RATE_CHANGE_DELAY_MASK (0x00FF0000)
+#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_DWORD_SYNC_TIMEOUT_SHIFT (24)
+#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_DWORD_SYNC_TIMEOUT_MASK (0xFF000000)
+#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_REQUIRED_MASK (0x00000000)
+#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_DEFAULT_MASK (0x7D00676F)
+#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_RESERVED_MASK (0x00FF0000)
+
+#define SCU_SAS_SPDTOV_GEN_VALUE(name, value) \
+ SCU_GEN_VALUE(SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_ ## name, value)
+
+
+#define SCU_LINK_STATUS_DWORD_SYNC_AQUIRED_SHIFT (2)
+#define SCU_LINK_STATUS_DWORD_SYNC_AQUIRED_MASK (0x00000004)
+#define SCU_LINK_STATUS_TRANSMIT_PORT_SELECTION_DONE_SHIFT (4)
+#define SCU_LINK_STATUS_TRANSMIT_PORT_SELECTION_DONE_MASK (0x00000010)
+#define SCU_LINK_STATUS_RECEIVER_CREDIT_EXHAUSTED_SHIFT (5)
+#define SCU_LINK_STATUS_RECEIVER_CREDIT_EXHAUSTED_MASK (0x00000020)
+#define SCU_LINK_STATUS_RESERVED_MASK (0xFFFFFFCD)
+
+#define SCU_SAS_LLSTA_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_LINK_STATUS_ ## name)
+
+
+/* TODO: Where is the SATA_PSELTOV register? */
+
+/*
+ * *****************************************************************************
+ * * SCU SAS Maximum Arbitration Wait Time Timeout Register
+ * ***************************************************************************** */
+#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_VALUE_SHIFT (0)
+#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_VALUE_MASK (0x00007FFF)
+#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_SCALE_SHIFT (15)
+#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_SCALE_MASK (0x00008000)
+
+#define SCU_SAS_MAWTTOV_GEN_VALUE(name, value) \
+ SCU_GEN_VALUE(SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_ ## name, value)
+
+#define SCU_SAS_MAWTTOV_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_ ## name)
+
+
+/*
+ * TODO: Where is the SAS_LNKTOV regsiter?
+ * TODO: Where is the SAS_PHYTOV register? */
+
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_SHIFT (1)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_MASK (0x00000002)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_TARGET_SHIFT (2)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_TARGET_MASK (0x00000004)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_TARGET_SHIFT (3)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_TARGET_MASK (0x00000008)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_DA_SATA_HOST_SHIFT (8)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_DA_SATA_HOST_MASK (0x00000100)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_INITIATOR_SHIFT (9)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_INITIATOR_MASK (0x00000200)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_INITIATOR_SHIFT (10)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_INITIATOR_MASK (0x00000400)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_INITIATOR_SHIFT (11)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_INITIATOR_MASK (0x00000800)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_REASON_CODE_SHIFT (16)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_REASON_CODE_MASK (0x000F0000)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_ADDRESS_FRAME_TYPE_SHIFT (24)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_ADDRESS_FRAME_TYPE_MASK (0x0F000000)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_DEVICE_TYPE_SHIFT (28)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_DEVICE_TYPE_MASK (0x70000000)
+#define SCU_SAS_TRANSMIT_IDENTIFICATION_RESERVED_MASK (0x80F0F1F1)
+
+#define SCU_SAS_TIID_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SAS_TRANSMIT_IDENTIFICATION_ ## name, value)
+
+#define SCU_SAS_TIID_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_SAS_TRANSMIT_IDENTIFICATION_ ## name)
+
+/* SAS Identify Frame PHY Identifier Register */
+#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_BREAK_REPLY_CAPABLE_SHIFT (16)
+#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_BREAK_REPLY_CAPABLE_MASK (0x00010000)
+#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_REQUESTED_INSIDE_ZPSDS_SHIFT (17)
+#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_REQUESTED_INSIDE_ZPSDS_MASK (0x00020000)
+#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_INSIDE_ZPSDS_PERSISTENT_SHIFT (18)
+#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_INSIDE_ZPSDS_PERSISTENT_MASK (0x00040000)
+#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ID_SHIFT (24)
+#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ID_MASK (0xFF000000)
+#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_RESERVED_MASK (0x00F800FF)
+
+#define SCU_SAS_TIPID_GEN_VALUE(name, value) \
+ SCU_GEN_VALUE(SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ ## name, value)
+
+#define SCU_SAS_TIPID_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ ## name)
+
+
+#define SCU_SAS_PHY_CONFIGURATION_TX_PARITY_CHECK_SHIFT (4)
+#define SCU_SAS_PHY_CONFIGURATION_TX_PARITY_CHECK_MASK (0x00000010)
+#define SCU_SAS_PHY_CONFIGURATION_TX_BAD_CRC_SHIFT (6)
+#define SCU_SAS_PHY_CONFIGURATION_TX_BAD_CRC_MASK (0x00000040)
+#define SCU_SAS_PHY_CONFIGURATION_DISABLE_SCRAMBLER_SHIFT (7)
+#define SCU_SAS_PHY_CONFIGURATION_DISABLE_SCRAMBLER_MASK (0x00000080)
+#define SCU_SAS_PHY_CONFIGURATION_DISABLE_DESCRAMBLER_SHIFT (8)
+#define SCU_SAS_PHY_CONFIGURATION_DISABLE_DESCRAMBLER_MASK (0x00000100)
+#define SCU_SAS_PHY_CONFIGURATION_DISABLE_CREDIT_INSERTION_SHIFT (9)
+#define SCU_SAS_PHY_CONFIGURATION_DISABLE_CREDIT_INSERTION_MASK (0x00000200)
+#define SCU_SAS_PHY_CONFIGURATION_SUSPEND_PROTOCOL_ENGINE_SHIFT (11)
+#define SCU_SAS_PHY_CONFIGURATION_SUSPEND_PROTOCOL_ENGINE_MASK (0x00000800)
+#define SCU_SAS_PHY_CONFIGURATION_SATA_SPINUP_HOLD_SHIFT (12)
+#define SCU_SAS_PHY_CONFIGURATION_SATA_SPINUP_HOLD_MASK (0x00001000)
+#define SCU_SAS_PHY_CONFIGURATION_TRANSMIT_PORT_SELECTION_SIGNAL_SHIFT (13)
+#define SCU_SAS_PHY_CONFIGURATION_TRANSMIT_PORT_SELECTION_SIGNAL_MASK (0x00002000)
+#define SCU_SAS_PHY_CONFIGURATION_HARD_RESET_SHIFT (14)
+#define SCU_SAS_PHY_CONFIGURATION_HARD_RESET_MASK (0x00004000)
+#define SCU_SAS_PHY_CONFIGURATION_OOB_ENABLE_SHIFT (15)
+#define SCU_SAS_PHY_CONFIGURATION_OOB_ENABLE_MASK (0x00008000)
+#define SCU_SAS_PHY_CONFIGURATION_ENABLE_FRAME_TX_INSERT_ALIGN_SHIFT (23)
+#define SCU_SAS_PHY_CONFIGURATION_ENABLE_FRAME_TX_INSERT_ALIGN_MASK (0x00800000)
+#define SCU_SAS_PHY_CONFIGURATION_FORWARD_IDENTIFY_FRAME_SHIFT (27)
+#define SCU_SAS_PHY_CONFIGURATION_FORWARD_IDENTIFY_FRAME_MASK (0x08000000)
+#define SCU_SAS_PHY_CONFIGURATION_DISABLE_BYTE_TRANSPOSE_STP_FRAME_SHIFT (28)
+#define SCU_SAS_PHY_CONFIGURATION_DISABLE_BYTE_TRANSPOSE_STP_FRAME_MASK (0x10000000)
+#define SCU_SAS_PHY_CONFIGURATION_OOB_RESET_SHIFT (29)
+#define SCU_SAS_PHY_CONFIGURATION_OOB_RESET_MASK (0x20000000)
+#define SCU_SAS_PHY_CONFIGURATION_THREE_IAF_ENABLE_SHIFT (30)
+#define SCU_SAS_PHY_CONFIGURATION_THREE_IAF_ENABLE_MASK (0x40000000)
+#define SCU_SAS_PHY_CONFIGURATION_OOB_ALIGN0_ENABLE_SHIFT (31)
+#define SCU_SAS_PHY_CONFIGURATION_OOB_ALIGN0_ENABLE_MASK (0x80000000)
+#define SCU_SAS_PHY_CONFIGURATION_REQUIRED_MASK (0x0100000F)
+#define SCU_SAS_PHY_CONFIGURATION_DEFAULT_MASK (0x4180100F)
+#define SCU_SAS_PHY_CONFIGURATION_RESERVED_MASK (0x00000000)
+
+#define SCU_SAS_PCFG_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_SAS_PHY_CONFIGURATION_ ## name)
+
+#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_SHIFT (0)
+#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_MASK (0x000007FF)
+#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_SHIFT (16)
+#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_MASK (0x00ff0000)
+
+#define SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_##name, value)
+
+#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_SHIFT (0)
+#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_MASK (0x0003FFFF)
+#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ENABLE_SHIFT (31)
+#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ENABLE_MASK (0x80000000)
+#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_RESERVED_MASK (0x7FFC0000)
+
+#define SCU_ENSPINUP_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ ## name, value)
+
+#define SCU_ENSPINUP_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ ## name)
+
+
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_TXSSCTYPE_SHIFT (1)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_TXSSCTYPE_MASK (0x00000002)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_RLLRATE_SHIFT (4)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_RLLRATE_MASK (0x000000F0)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO15GBPS_SHIFT (8)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO15GBPS_MASK (0x00000100)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW15GBPS_SHIFT (9)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW15GBPS_MASK (0x00000201)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO30GBPS_SHIFT (10)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO30GBPS_MASK (0x00000401)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW30GBPS_SHIFT (11)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW30GBPS_MASK (0x00000801)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO60GBPS_SHIFT (12)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO60GBPS_MASK (0x00001001)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW60GBPS_SHIFT (13)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW60GBPS_MASK (0x00002001)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_EVEN_PARITY_SHIFT (31)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_EVEN_PARITY_MASK (0x80000000)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_DEFAULT_MASK (0x00003F01)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_REQUIRED_MASK (0x00000001)
+#define SCU_LINK_LAYER_PHY_CAPABILITIES_RESERVED_MASK (0x7FFFC00D)
+
+#define SCU_SAS_PHYCAP_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_LINK_LAYER_PHY_CAPABILITIES_ ## name, value)
+
+#define SCU_SAS_PHYCAP_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_LINK_LAYER_PHY_CAPABILITIES_ ## name)
+
+
+#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_VIRTUAL_EXPANDER_PHY_ZONE_GROUP_SHIFT (0)
+#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_VIRTUAL_EXPANDER_PHY_ZONE_GROUP_MASK (0x000000FF)
+#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_INSIDE_SOURCE_ZONE_GROUP_SHIFT (31)
+#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_INSIDE_SOURCE_ZONE_GROUP_MASK (0x80000000)
+#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_RESERVED_MASK (0x7FFFFF00)
+
+#define SCU_PSZGCR_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_ ## name, value)
+
+#define SCU_PSZGCR_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_ ## name)
+
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_LOCKED_SHIFT (1)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_LOCKED_MASK (0x00000002)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_UPDATING_SHIFT (2)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_UPDATING_MASK (0x00000004)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_LOCKED_SHIFT (4)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_LOCKED_MASK (0x00000010)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_UPDATING_SHIFT (5)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_UPDATING_MASK (0x00000020)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE0_SHIFT (16)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE0_MASK (0x00030000)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE0_SHIFT (19)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE0_MASK (0x00080000)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE1_SHIFT (20)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE1_MASK (0x00300000)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE1_SHIFT (23)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE1_MASK (0x00800000)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE2_SHIFT (24)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE2_MASK (0x03000000)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE2_SHIFT (27)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE2_MASK (0x08000000)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE3_SHIFT (28)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE3_MASK (0x30000000)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE3_SHIFT (31)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE3_MASK (0x80000000)
+#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_RESERVED_MASK (0x4444FFC9)
+
+#define SCU_PEG_SCUVZECR_GEN_VAL(name, val) \
+ SCU_GEN_VALUE(SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ ## name, val)
+
+#define SCU_PEG_SCUVZECR_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ ## name)
+
+
+/*
+ * *****************************************************************************
+ * * Port Task Scheduler registers shift and mask values
+ * ***************************************************************************** */
+#define SCU_PTSG_CONTROL_IT_NEXUS_TIMEOUT_SHIFT (0)
+#define SCU_PTSG_CONTROL_IT_NEXUS_TIMEOUT_MASK (0x0000FFFF)
+#define SCU_PTSG_CONTROL_TASK_TIMEOUT_SHIFT (16)
+#define SCU_PTSG_CONTROL_TASK_TIMEOUT_MASK (0x00FF0000)
+#define SCU_PTSG_CONTROL_PTSG_ENABLE_SHIFT (24)
+#define SCU_PTSG_CONTROL_PTSG_ENABLE_MASK (0x01000000)
+#define SCU_PTSG_CONTROL_ETM_ENABLE_SHIFT (25)
+#define SCU_PTSG_CONTROL_ETM_ENABLE_MASK (0x02000000)
+#define SCU_PTSG_CONTROL_DEFAULT_MASK (0x00020002)
+#define SCU_PTSG_CONTROL_REQUIRED_MASK (0x00000000)
+#define SCU_PTSG_CONTROL_RESERVED_MASK (0xFC000000)
+
+#define SCU_PTSGCR_GEN_VAL(name, val) \
+ SCU_GEN_VALUE(SCU_PTSG_CONTROL_ ## name, val)
+
+#define SCU_PTSGCR_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_PTSG_CONTROL_ ## name)
+
+
+/* ***************************************************************************** */
+#define SCU_PTSG_REAL_TIME_CLOCK_SHIFT (0)
+#define SCU_PTSG_REAL_TIME_CLOCK_MASK (0x0000FFFF)
+#define SCU_PTSG_REAL_TIME_CLOCK_RESERVED_MASK (0xFFFF0000)
+
+#define SCU_RTCR_GEN_VAL(name, val) \
+ SCU_GEN_VALUE(SCU_PTSG_ ## name, val)
+
+
+#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_PRESCALER_VALUE_SHIFT (0)
+#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_PRESCALER_VALUE_MASK (0x00FFFFFF)
+#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_RESERVED_MASK (0xFF000000)
+
+#define SCU_RTCCR_GEN_VAL(name, val) \
+ SCU_GEN_VALUE(SCU_PTSG_REAL_TIME_CLOCK_CONTROL_ ## name, val)
+
+
+#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_SUSPEND_SHIFT (0)
+#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_SUSPEND_MASK (0x00000001)
+#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ENABLE_SHIFT (1)
+#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ENABLE_MASK (0x00000002)
+#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_RESERVED_MASK (0xFFFFFFFC)
+
+#define SCU_PTSxCR_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ ## name)
+
+
+#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_NEXT_RN_VALID_SHIFT (0)
+#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_NEXT_RN_VALID_MASK (0x00000001)
+#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ACTIVE_RNSC_LIST_VALID_SHIFT (1)
+#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ACTIVE_RNSC_LIST_VALID_MASK (0x00000002)
+#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_PTS_SUSPENDED_SHIFT (2)
+#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_PTS_SUSPENDED_MASK (0x00000004)
+#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_RESERVED_MASK (0xFFFFFFF8)
+
+#define SCU_PTSxSR_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ ## name)
+
+
+/*
+ * *****************************************************************************
+ * * SGPIO Register shift and mask values
+ * ***************************************************************************** */
+#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_SHIFT (0)
+#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_MASK (0x00000001)
+#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_SHIFT (1)
+#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_MASK (0x00000002)
+#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_SHIFT (2)
+#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_MASK (0x00000004)
+#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_SHIFT (15)
+#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_MASK (0x00008000)
+#define SCU_SGPIO_CONTROL_SGPIO_RESERVED_MASK (0xFFFF7FF8)
+
+#define SCU_SGICRx_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_SGPIO_CONTROL_SGPIO_ ## name)
+
+#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_SHIFT (0)
+#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_MASK (0x0000000F)
+#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_SHIFT (4)
+#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_MASK (0x000000F0)
+#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_SHIFT (8)
+#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_MASK (0x00000F00)
+#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_SHIFT (12)
+#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_MASK (0x0000F000)
+#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_RESERVED_MASK (0xFFFF0000)
+
+#define SCU_SGPBRx_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_ ## name, value)
+
+#define SCU_SGPIO_START_DRIVE_LOWER_R0_SHIFT (0)
+#define SCU_SGPIO_START_DRIVE_LOWER_R0_MASK (0x00000003)
+#define SCU_SGPIO_START_DRIVE_LOWER_R1_SHIFT (4)
+#define SCU_SGPIO_START_DRIVE_LOWER_R1_MASK (0x00000030)
+#define SCU_SGPIO_START_DRIVE_LOWER_R2_SHIFT (8)
+#define SCU_SGPIO_START_DRIVE_LOWER_R2_MASK (0x00000300)
+#define SCU_SGPIO_START_DRIVE_LOWER_R3_SHIFT (12)
+#define SCU_SGPIO_START_DRIVE_LOWER_R3_MASK (0x00003000)
+#define SCU_SGPIO_START_DRIVE_LOWER_RESERVED_MASK (0xFFFF8888)
+
+#define SCU_SGSDLRx_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value)
+
+#define SCU_SGPIO_START_DRIVE_UPPER_R0_SHIFT (0)
+#define SCU_SGPIO_START_DRIVE_UPPER_R0_MASK (0x00000003)
+#define SCU_SGPIO_START_DRIVE_UPPER_R1_SHIFT (4)
+#define SCU_SGPIO_START_DRIVE_UPPER_R1_MASK (0x00000030)
+#define SCU_SGPIO_START_DRIVE_UPPER_R2_SHIFT (8)
+#define SCU_SGPIO_START_DRIVE_UPPER_R2_MASK (0x00000300)
+#define SCU_SGPIO_START_DRIVE_UPPER_R3_SHIFT (12)
+#define SCU_SGPIO_START_DRIVE_UPPER_R3_MASK (0x00003000)
+#define SCU_SGPIO_START_DRIVE_UPPER_RESERVED_MASK (0xFFFF8888)
+
+#define SCU_SGSDURx_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value)
+
+#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_SHIFT (0)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_MASK (0x00000003)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_SHIFT (4)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_MASK (0x00000030)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_SHIFT (8)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_MASK (0x00000300)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_SHIFT (12)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_MASK (0x00003000)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_RESERVED_MASK (0xFFFF8888)
+
+#define SCU_SGSIDLRx_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value)
+
+#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_SHIFT (0)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_MASK (0x00000003)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_SHIFT (4)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_MASK (0x00000030)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_SHIFT (8)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_MASK (0x00000300)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_SHIFT (12)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_MASK (0x00003000)
+#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_RESERVED_MASK (0xFFFF8888)
+
+#define SCU_SGSIDURx_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value)
+
+#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_SHIFT (0)
+#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_MASK (0x0000000F)
+#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_RESERVED_MASK (0xFFFFFFF0)
+
+#define SCU_SGVSCR_GEN_VAL(value) \
+ SCU_GEN_VALUE(SCU_SGPIO_VENDOR_SPECIFIC_CODE ## name, value)
+
+#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_SHIFT (0)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_MASK (0x00000003)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_SHIFT (2)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_MASK (0x00000004)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_SHIFT (3)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_MASK (0x00000008)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_SHIFT (4)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_MASK (0x00000030)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_SHIFT (6)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_MASK (0x00000040)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_SHIFT (7)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_MASK (0x00000080)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_SHIFT (8)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_MASK (0x00000300)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_SHIFT (10)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_MASK (0x00000400)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_SHIFT (11)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_MASK (0x00000800)
+#define SCU_SGPIO_OUPUT_DATA_SELECT_RESERVED_MASK (0xFFFFF000)
+
+#define SCU_SGODSR_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name, value)
+
+#define SCU_SGODSR_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name)
+
+/*
+ * *****************************************************************************
+ * * SMU Registers
+ * ***************************************************************************** */
+
+/*
+ * ----------------------------------------------------------------------------
+ * SMU Registers
+ * These registers are based off of BAR0
+ *
+ * To calculate the offset for other functions use
+ * BAR0 + FN# * SystemPageSize * 2
+ *
+ * The TCA is only accessable from FN#0 (Physical Function) and each
+ * is programmed by (BAR0 + SCU_SMU_TCA_OFFSET + (FN# * 0x04)) or
+ * TCA0 for FN#0 is at BAR0 + 0x0400
+ * TCA1 for FN#1 is at BAR0 + 0x0404
+ * etc.
+ * ----------------------------------------------------------------------------
+ * Accessable to all FN#s */
+#define SCU_SMU_PCP_OFFSET 0x0000
+#define SCU_SMU_AMR_OFFSET 0x0004
+#define SCU_SMU_ISR_OFFSET 0x0010
+#define SCU_SMU_IMR_OFFSET 0x0014
+#define SCU_SMU_ICC_OFFSET 0x0018
+#define SCU_SMU_HTTLBAR_OFFSET 0x0020
+#define SCU_SMU_HTTUBAR_OFFSET 0x0024
+#define SCU_SMU_TCR_OFFSET 0x0028
+#define SCU_SMU_CQLBAR_OFFSET 0x0030
+#define SCU_SMU_CQUBAR_OFFSET 0x0034
+#define SCU_SMU_CQPR_OFFSET 0x0040
+#define SCU_SMU_CQGR_OFFSET 0x0044
+#define SCU_SMU_CQC_OFFSET 0x0048
+/* Accessable to FN#0 only */
+#define SCU_SMU_RNCLBAR_OFFSET 0x0080
+#define SCU_SMU_RNCUBAR_OFFSET 0x0084
+#define SCU_SMU_DCC_OFFSET 0x0090
+#define SCU_SMU_DFC_OFFSET 0x0094
+#define SCU_SMU_SMUCSR_OFFSET 0x0098
+#define SCU_SMU_SCUSRCR_OFFSET 0x009C
+#define SCU_SMU_SMAW_OFFSET 0x00A0
+#define SCU_SMU_SMDW_OFFSET 0x00A4
+/* Accessable to FN#0 only */
+#define SCU_SMU_TCA_OFFSET 0x0400
+/* Accessable to all FN#s */
+#define SCU_SMU_MT_MLAR0_OFFSET 0x2000
+#define SCU_SMU_MT_MUAR0_OFFSET 0x2004
+#define SCU_SMU_MT_MDR0_OFFSET 0x2008
+#define SCU_SMU_MT_VCR0_OFFSET 0x200C
+#define SCU_SMU_MT_MLAR1_OFFSET 0x2010
+#define SCU_SMU_MT_MUAR1_OFFSET 0x2014
+#define SCU_SMU_MT_MDR1_OFFSET 0x2018
+#define SCU_SMU_MT_VCR1_OFFSET 0x201C
+#define SCU_SMU_MPBA_OFFSET 0x3000
+
+/**
+ * struct smu_registers - These are the SMU registers
+ *
+ *
+ */
+struct smu_registers {
+/* 0x0000 PCP */
+ u32 post_context_port;
+/* 0x0004 AMR */
+ u32 address_modifier;
+ u32 reserved_08;
+ u32 reserved_0C;
+/* 0x0010 ISR */
+ u32 interrupt_status;
+/* 0x0014 IMR */
+ u32 interrupt_mask;
+/* 0x0018 ICC */
+ u32 interrupt_coalesce_control;
+ u32 reserved_1C;
+/* 0x0020 HTTLBAR */
+ u32 host_task_table_lower;
+/* 0x0024 HTTUBAR */
+ u32 host_task_table_upper;
+/* 0x0028 TCR */
+ u32 task_context_range;
+ u32 reserved_2C;
+/* 0x0030 CQLBAR */
+ u32 completion_queue_lower;
+/* 0x0034 CQUBAR */
+ u32 completion_queue_upper;
+ u32 reserved_38;
+ u32 reserved_3C;
+/* 0x0040 CQPR */
+ u32 completion_queue_put;
+/* 0x0044 CQGR */
+ u32 completion_queue_get;
+/* 0x0048 CQC */
+ u32 completion_queue_control;
+ u32 reserved_4C;
+ u32 reserved_5x[4];
+ u32 reserved_6x[4];
+ u32 reserved_7x[4];
+/*
+ * Accessable to FN#0 only
+ * 0x0080 RNCLBAR */
+ u32 remote_node_context_lower;
+/* 0x0084 RNCUBAR */
+ u32 remote_node_context_upper;
+ u32 reserved_88;
+ u32 reserved_8C;
+/* 0x0090 DCC */
+ u32 device_context_capacity;
+/* 0x0094 DFC */
+ u32 device_function_capacity;
+/* 0x0098 SMUCSR */
+ u32 control_status;
+/* 0x009C SCUSRCR */
+ u32 soft_reset_control;
+/* 0x00A0 SMAW */
+ u32 mmr_address_window;
+/* 0x00A4 SMDW */
+ u32 mmr_data_window;
+ u32 reserved_A8;
+ u32 reserved_AC;
+/* A whole bunch of reserved space */
+ u32 reserved_Bx[4];
+ u32 reserved_Cx[4];
+ u32 reserved_Dx[4];
+ u32 reserved_Ex[4];
+ u32 reserved_Fx[4];
+ u32 reserved_1xx[64];
+ u32 reserved_2xx[64];
+ u32 reserved_3xx[64];
+/*
+ * Accessable to FN#0 only
+ * 0x0400 TCA */
+ u32 task_context_assignment[256];
+/* MSI-X registers not included */
+};
+
+/*
+ * *****************************************************************************
+ * SDMA Registers
+ * ***************************************************************************** */
+#define SCU_SDMA_BASE 0x6000
+#define SCU_SDMA_PUFATLHAR_OFFSET 0x0000
+#define SCU_SDMA_PUFATUHAR_OFFSET 0x0004
+#define SCU_SDMA_UFLHBAR_OFFSET 0x0008
+#define SCU_SDMA_UFUHBAR_OFFSET 0x000C
+#define SCU_SDMA_UFQC_OFFSET 0x0010
+#define SCU_SDMA_UFQPP_OFFSET 0x0014
+#define SCU_SDMA_UFQGP_OFFSET 0x0018
+#define SCU_SDMA_PDMACR_OFFSET 0x001C
+#define SCU_SDMA_CDMACR_OFFSET 0x0080
+
+/**
+ * struct scu_sdma_registers - These are the SCU SDMA Registers
+ *
+ *
+ */
+struct scu_sdma_registers {
+/* 0x0000 PUFATLHAR */
+ u32 uf_address_table_lower;
+/* 0x0004 PUFATUHAR */
+ u32 uf_address_table_upper;
+/* 0x0008 UFLHBAR */
+ u32 uf_header_base_address_lower;
+/* 0x000C UFUHBAR */
+ u32 uf_header_base_address_upper;
+/* 0x0010 UFQC */
+ u32 unsolicited_frame_queue_control;
+/* 0x0014 UFQPP */
+ u32 unsolicited_frame_put_pointer;
+/* 0x0018 UFQGP */
+ u32 unsolicited_frame_get_pointer;
+/* 0x001C PDMACR */
+ u32 pdma_configuration;
+/* Reserved until offset 0x80 */
+ u32 reserved_0020_007C[0x18];
+/* 0x0080 CDMACR */
+ u32 cdma_configuration;
+/* Remainder SDMA register space */
+ u32 reserved_0084_0400[0xDF];
+
+};
+
+/*
+ * *****************************************************************************
+ * * SCU Link Registers
+ * ***************************************************************************** */
+#define SCU_PEG0_OFFSET 0x0000
+#define SCU_PEG1_OFFSET 0x8000
+
+#define SCU_TL0_OFFSET 0x0000
+#define SCU_TL1_OFFSET 0x0400
+#define SCU_TL2_OFFSET 0x0800
+#define SCU_TL3_OFFSET 0x0C00
+
+#define SCU_LL_OFFSET 0x0080
+#define SCU_LL0_OFFSET (SCU_TL0_OFFSET + SCU_LL_OFFSET)
+#define SCU_LL1_OFFSET (SCU_TL1_OFFSET + SCU_LL_OFFSET)
+#define SCU_LL2_OFFSET (SCU_TL2_OFFSET + SCU_LL_OFFSET)
+#define SCU_LL3_OFFSET (SCU_TL3_OFFSET + SCU_LL_OFFSET)
+
+/* Transport Layer Offsets (PEG + TL) */
+#define SCU_TLCR_OFFSET 0x0000
+#define SCU_TLADTR_OFFSET 0x0004
+#define SCU_TLTTMR_OFFSET 0x0008
+#define SCU_TLEECR0_OFFSET 0x000C
+#define SCU_STPTLDARNI_OFFSET 0x0010
+
+
+#define SCU_TLCR_HASH_SAS_CHECKING_ENABLE_SHIFT (0)
+#define SCU_TLCR_HASH_SAS_CHECKING_ENABLE_MASK (0x00000001)
+#define SCU_TLCR_CLEAR_TCI_NCQ_MAPPING_TABLE_SHIFT (1)
+#define SCU_TLCR_CLEAR_TCI_NCQ_MAPPING_TABLE_MASK (0x00000002)
+#define SCU_TLCR_STP_WRITE_DATA_PREFETCH_SHIFT (3)
+#define SCU_TLCR_STP_WRITE_DATA_PREFETCH_MASK (0x00000008)
+#define SCU_TLCR_CMD_NAK_STATUS_CODE_SHIFT (4)
+#define SCU_TLCR_CMD_NAK_STATUS_CODE_MASK (0x00000010)
+#define SCU_TLCR_RESERVED_MASK (0xFFFFFFEB)
+
+#define SCU_TLCR_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_TLCR_ ## name)
+
+/**
+ * struct scu_transport_layer_registers - These are the SCU Transport Layer
+ * registers
+ *
+ *
+ */
+struct scu_transport_layer_registers {
+ /* 0x0000 TLCR */
+ u32 control;
+ /* 0x0004 TLADTR */
+ u32 arbitration_delay_timer;
+ /* 0x0008 TLTTMR */
+ u32 timer_test_mode;
+ /* 0x000C reserved */
+ u32 reserved_0C;
+ /* 0x0010 STPTLDARNI */
+ u32 stp_rni;
+ /* 0x0014 TLFEWPORCTRL */
+ u32 tlfe_wpo_read_control;
+ /* 0x0018 TLFEWPORDATA */
+ u32 tlfe_wpo_read_data;
+ /* 0x001C RXTLSSCSR1 */
+ u32 rxtl_single_step_control_status_1;
+ /* 0x0020 RXTLSSCSR2 */
+ u32 rxtl_single_step_control_status_2;
+ /* 0x0024 AWTRDDCR */
+ u32 tlfe_awt_retry_delay_debug_control;
+ /* Remainder of TL memory space */
+ u32 reserved_0028_007F[0x16];
+
+};
+
+/* Protocol Engine Group Registers */
+#define SCU_SCUVZECRx_OFFSET 0x1080
+
+/* Link Layer Offsets (PEG + TL + LL) */
+#define SCU_SAS_SPDTOV_OFFSET 0x0000
+#define SCU_SAS_LLSTA_OFFSET 0x0004
+#define SCU_SATA_PSELTOV_OFFSET 0x0008
+#define SCU_SAS_TIMETOV_OFFSET 0x0010
+#define SCU_SAS_LOSTOT_OFFSET 0x0014
+#define SCU_SAS_LNKTOV_OFFSET 0x0018
+#define SCU_SAS_PHYTOV_OFFSET 0x001C
+#define SCU_SAS_AFERCNT_OFFSET 0x0020
+#define SCU_SAS_WERCNT_OFFSET 0x0024
+#define SCU_SAS_TIID_OFFSET 0x0028
+#define SCU_SAS_TIDNH_OFFSET 0x002C
+#define SCU_SAS_TIDNL_OFFSET 0x0030
+#define SCU_SAS_TISSAH_OFFSET 0x0034
+#define SCU_SAS_TISSAL_OFFSET 0x0038
+#define SCU_SAS_TIPID_OFFSET 0x003C
+#define SCU_SAS_TIRES2_OFFSET 0x0040
+#define SCU_SAS_ADRSTA_OFFSET 0x0044
+#define SCU_SAS_MAWTTOV_OFFSET 0x0048
+#define SCU_SAS_FRPLDFIL_OFFSET 0x0054
+#define SCU_SAS_RFCNT_OFFSET 0x0060
+#define SCU_SAS_TFCNT_OFFSET 0x0064
+#define SCU_SAS_RFDCNT_OFFSET 0x0068
+#define SCU_SAS_TFDCNT_OFFSET 0x006C
+#define SCU_SAS_LERCNT_OFFSET 0x0070
+#define SCU_SAS_RDISERRCNT_OFFSET 0x0074
+#define SCU_SAS_CRERCNT_OFFSET 0x0078
+#define SCU_STPCTL_OFFSET 0x007C
+#define SCU_SAS_PCFG_OFFSET 0x0080
+#define SCU_SAS_CLKSM_OFFSET 0x0084
+#define SCU_SAS_TXCOMWAKE_OFFSET 0x0088
+#define SCU_SAS_TXCOMINIT_OFFSET 0x008C
+#define SCU_SAS_TXCOMSAS_OFFSET 0x0090
+#define SCU_SAS_COMINIT_OFFSET 0x0094
+#define SCU_SAS_COMWAKE_OFFSET 0x0098
+#define SCU_SAS_COMSAS_OFFSET 0x009C
+#define SCU_SAS_SFERCNT_OFFSET 0x00A0
+#define SCU_SAS_CDFERCNT_OFFSET 0x00A4
+#define SCU_SAS_DNFERCNT_OFFSET 0x00A8
+#define SCU_SAS_PRSTERCNT_OFFSET 0x00AC
+#define SCU_SAS_CNTCTL_OFFSET 0x00B0
+#define SCU_SAS_SSPTOV_OFFSET 0x00B4
+#define SCU_FTCTL_OFFSET 0x00B8
+#define SCU_FRCTL_OFFSET 0x00BC
+#define SCU_FTWMRK_OFFSET 0x00C0
+#define SCU_ENSPINUP_OFFSET 0x00C4
+#define SCU_SAS_TRNTOV_OFFSET 0x00C8
+#define SCU_SAS_PHYCAP_OFFSET 0x00CC
+#define SCU_SAS_PHYCTL_OFFSET 0x00D0
+#define SCU_SAS_LLCTL_OFFSET 0x00D8
+#define SCU_AFE_XCVRCR_OFFSET 0x00DC
+#define SCU_AFE_LUTCR_OFFSET 0x00E0
+
+#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT (0)
+#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK (0x00000003)
+#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 (0)
+#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2 (1)
+#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3 (2)
+#define SCU_SAS_LINK_LAYER_CONTROL_BROADCAST_PRIMITIVE_SHIFT (2)
+#define SCU_SAS_LINK_LAYER_CONTROL_BROADCAST_PRIMITIVE_MASK (0x000003FC)
+#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_ACTIVE_TASK_DISABLE_SHIFT (16)
+#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_ACTIVE_TASK_DISABLE_MASK (0x00010000)
+#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_OUTBOUND_TASK_DISABLE_SHIFT (17)
+#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_OUTBOUND_TASK_DISABLE_MASK (0x00020000)
+#define SCU_SAS_LINK_LAYER_CONTROL_NO_OUTBOUND_TASK_TIMEOUT_SHIFT (24)
+#define SCU_SAS_LINK_LAYER_CONTROL_NO_OUTBOUND_TASK_TIMEOUT_MASK (0xFF000000)
+#define SCU_SAS_LINK_LAYER_CONTROL_RESERVED (0x00FCFC00)
+
+#define SCU_SAS_LLCTL_GEN_VAL(name, value) \
+ SCU_GEN_VALUE(SCU_SAS_LINK_LAYER_CONTROL_ ## name, value)
+
+#define SCU_SAS_LLCTL_GEN_BIT(name) \
+ SCU_GEN_BIT(SCU_SAS_LINK_LAYER_CONTROL_ ## name)
+
+
+/* #define SCU_FRXHECR_DCNT_OFFSET 0x00B0 */
+#define SCU_PSZGCR_OFFSET 0x00E4
+#define SCU_SAS_RECPHYCAP_OFFSET 0x00E8
+/* #define SCU_TX_LUTSEL_OFFSET 0x00B8 */
+
+#define SCU_SAS_PTxC_OFFSET 0x00D4 /* Same offset as SAS_TCTSTM */
+
+/**
+ * struct scu_link_layer_registers - SCU Link Layer Registers
+ *
+ *
+ */
+struct scu_link_layer_registers {
+/* 0x0000 SAS_SPDTOV */
+ u32 speed_negotiation_timers;
+/* 0x0004 SAS_LLSTA */
+ u32 link_layer_status;
+/* 0x0008 SATA_PSELTOV */
+ u32 port_selector_timeout;
+ u32 reserved0C;
+/* 0x0010 SAS_TIMETOV */
+ u32 timeout_unit_value;
+/* 0x0014 SAS_RCDTOV */
+ u32 rcd_timeout;
+/* 0x0018 SAS_LNKTOV */
+ u32 link_timer_timeouts;
+/* 0x001C SAS_PHYTOV */
+ u32 sas_phy_timeouts;
+/* 0x0020 SAS_AFERCNT */
+ u32 received_address_frame_error_counter;
+/* 0x0024 SAS_WERCNT */
+ u32 invalid_dword_counter;
+/* 0x0028 SAS_TIID */
+ u32 transmit_identification;
+/* 0x002C SAS_TIDNH */
+ u32 sas_device_name_high;
+/* 0x0030 SAS_TIDNL */
+ u32 sas_device_name_low;
+/* 0x0034 SAS_TISSAH */
+ u32 source_sas_address_high;
+/* 0x0038 SAS_TISSAL */
+ u32 source_sas_address_low;
+/* 0x003C SAS_TIPID */
+ u32 identify_frame_phy_id;
+/* 0x0040 SAS_TIRES2 */
+ u32 identify_frame_reserved;
+/* 0x0044 SAS_ADRSTA */
+ u32 received_address_frame;
+/* 0x0048 SAS_MAWTTOV */
+ u32 maximum_arbitration_wait_timer_timeout;
+/* 0x004C SAS_PTxC */
+ u32 transmit_primitive;
+/* 0x0050 SAS_RORES */
+ u32 error_counter_event_notification_control;
+/* 0x0054 SAS_FRPLDFIL */
+ u32 frxq_payload_fill_threshold;
+/* 0x0058 SAS_LLHANG_TOT */
+ u32 link_layer_hang_detection_timeout;
+ u32 reserved_5C;
+/* 0x0060 SAS_RFCNT */
+ u32 received_frame_count;
+/* 0x0064 SAS_TFCNT */
+ u32 transmit_frame_count;
+/* 0x0068 SAS_RFDCNT */
+ u32 received_dword_count;
+/* 0x006C SAS_TFDCNT */
+ u32 transmit_dword_count;
+/* 0x0070 SAS_LERCNT */
+ u32 loss_of_sync_error_count;
+/* 0x0074 SAS_RDISERRCNT */
+ u32 running_disparity_error_count;
+/* 0x0078 SAS_CRERCNT */
+ u32 received_frame_crc_error_count;
+/* 0x007C STPCTL */
+ u32 stp_control;
+/* 0x0080 SAS_PCFG */
+ u32 phy_configuration;
+/* 0x0084 SAS_CLKSM */
+ u32 clock_skew_management;
+/* 0x0088 SAS_TXCOMWAKE */
+ u32 transmit_comwake_signal;
+/* 0x008C SAS_TXCOMINIT */
+ u32 transmit_cominit_signal;
+/* 0x0090 SAS_TXCOMSAS */
+ u32 transmit_comsas_signal;
+/* 0x0094 SAS_COMINIT */
+ u32 cominit_control;
+/* 0x0098 SAS_COMWAKE */
+ u32 comwake_control;
+/* 0x009C SAS_COMSAS */
+ u32 comsas_control;
+/* 0x00A0 SAS_SFERCNT */
+ u32 received_short_frame_count;
+/* 0x00A4 SAS_CDFERCNT */
+ u32 received_frame_without_credit_count;
+/* 0x00A8 SAS_DNFERCNT */
+ u32 received_frame_after_done_count;
+/* 0x00AC SAS_PRSTERCNT */
+ u32 phy_reset_problem_count;
+/* 0x00B0 SAS_CNTCTL */
+ u32 counter_control;
+/* 0x00B4 SAS_SSPTOV */
+ u32 ssp_timer_timeout_values;
+/* 0x00B8 FTCTL */
+ u32 ftx_control;
+/* 0x00BC FRCTL */
+ u32 frx_control;
+/* 0x00C0 FTWMRK */
+ u32 ftx_watermark;
+/* 0x00C4 ENSPINUP */
+ u32 notify_enable_spinup_control;
+/* 0x00C8 SAS_TRNTOV */
+ u32 sas_training_sequence_timer_values;
+/* 0x00CC SAS_PHYCAP */
+ u32 phy_capabilities;
+/* 0x00D0 SAS_PHYCTL */
+ u32 phy_control;
+ u32 reserved_d4;
+/* 0x00D8 LLCTL */
+ u32 link_layer_control;
+/* 0x00DC AFE_XCVRCR */
+ u32 afe_xcvr_control;
+/* 0x00E0 AFE_LUTCR */
+ u32 afe_lookup_table_control;
+/* 0x00E4 PSZGCR */
+ u32 phy_source_zone_group_control;
+/* 0x00E8 SAS_RECPHYCAP */
+ u32 receive_phycap;
+ u32 reserved_ec;
+/* 0x00F0 SNAFERXRSTCTL */
+ u32 speed_negotiation_afe_rx_reset_control;
+/* 0x00F4 SAS_SSIPMCTL */
+ u32 power_management_control;
+/* 0x00F8 SAS_PSPREQ_PRIM */
+ u32 sas_pm_partial_request_primitive;
+/* 0x00FC SAS_PSSREQ_PRIM */
+ u32 sas_pm_slumber_request_primitive;
+/* 0x0100 SAS_PPSACK_PRIM */
+ u32 sas_pm_ack_primitive_register;
+/* 0x0104 SAS_PSNAK_PRIM */
+ u32 sas_pm_nak_primitive_register;
+/* 0x0108 SAS_SSIPMTOV */
+ u32 sas_primitive_timeout;
+ u32 reserved_10c;
+/* 0x0110 - 0x011C PLAPRDCTRLxREG */
+ u32 pla_product_control[4];
+/* 0x0120 PLAPRDSUMREG */
+ u32 pla_product_sum;
+/* 0x0124 PLACONTROLREG */
+ u32 pla_control;
+/* Remainder of memory space 896 bytes */
+ u32 reserved_0128_037f[0x96];
+
+};
+
+/*
+ * 0x00D4 // Same offset as SAS_TCTSTM SAS_PTxC
+ * u32 primitive_transmit_control; */
+
+/*
+ * ----------------------------------------------------------------------------
+ * SGPIO
+ * ---------------------------------------------------------------------------- */
+#define SCU_SGPIO_OFFSET 0x1400
+
+/* #define SCU_SGPIO_OFFSET 0x6000 // later moves to 0x1400 see HSD 652625 */
+#define SCU_SGPIO_SGICR_OFFSET 0x0000
+#define SCU_SGPIO_SGPBR_OFFSET 0x0004
+#define SCU_SGPIO_SGSDLR_OFFSET 0x0008
+#define SCU_SGPIO_SGSDUR_OFFSET 0x000C
+#define SCU_SGPIO_SGSIDLR_OFFSET 0x0010
+#define SCU_SGPIO_SGSIDUR_OFFSET 0x0014
+#define SCU_SGPIO_SGVSCR_OFFSET 0x0018
+/* Address from 0x0820 to 0x083C */
+#define SCU_SGPIO_SGODSR_OFFSET 0x0020
+
+/**
+ * struct scu_sgpio_registers - SCU SGPIO Registers
+ *
+ *
+ */
+struct scu_sgpio_registers {
+/* 0x0000 SGPIO_SGICR */
+ u32 interface_control;
+/* 0x0004 SGPIO_SGPBR */
+ u32 blink_rate;
+/* 0x0008 SGPIO_SGSDLR */
+ u32 start_drive_lower;
+/* 0x000C SGPIO_SGSDUR */
+ u32 start_drive_upper;
+/* 0x0010 SGPIO_SGSIDLR */
+ u32 serial_input_lower;
+/* 0x0014 SGPIO_SGSIDUR */
+ u32 serial_input_upper;
+/* 0x0018 SGPIO_SGVSCR */
+ u32 vendor_specific_code;
+/* 0x0020 SGPIO_SGODSR */
+ u32 ouput_data_select[8];
+/* Remainder of memory space 256 bytes */
+ u32 reserved_1444_14ff[0x31];
+
+};
+
+/*
+ * *****************************************************************************
+ * * Defines for VIIT entry offsets
+ * * Access additional entries by SCU_VIIT_BASE + index * 0x10
+ * ***************************************************************************** */
+#define SCU_VIIT_BASE 0x1c00
+
+struct scu_viit_registers {
+ u32 registers[256];
+};
+
+/*
+ * *****************************************************************************
+ * * SCU PORT TASK SCHEDULER REGISTERS
+ * ***************************************************************************** */
+
+#define SCU_PTSG_BASE 0x1000
+
+#define SCU_PTSG_PTSGCR_OFFSET 0x0000
+#define SCU_PTSG_RTCR_OFFSET 0x0004
+#define SCU_PTSG_RTCCR_OFFSET 0x0008
+#define SCU_PTSG_PTS0CR_OFFSET 0x0010
+#define SCU_PTSG_PTS0SR_OFFSET 0x0014
+#define SCU_PTSG_PTS1CR_OFFSET 0x0018
+#define SCU_PTSG_PTS1SR_OFFSET 0x001C
+#define SCU_PTSG_PTS2CR_OFFSET 0x0020
+#define SCU_PTSG_PTS2SR_OFFSET 0x0024
+#define SCU_PTSG_PTS3CR_OFFSET 0x0028
+#define SCU_PTSG_PTS3SR_OFFSET 0x002C
+#define SCU_PTSG_PCSPE0CR_OFFSET 0x0030
+#define SCU_PTSG_PCSPE1CR_OFFSET 0x0034
+#define SCU_PTSG_PCSPE2CR_OFFSET 0x0038
+#define SCU_PTSG_PCSPE3CR_OFFSET 0x003C
+#define SCU_PTSG_ETMTSCCR_OFFSET 0x0040
+#define SCU_PTSG_ETMRNSCCR_OFFSET 0x0044
+
+/**
+ * struct scu_port_task_scheduler_registers - These are the control/stats pairs
+ * for each Port Task Scheduler.
+ *
+ *
+ */
+struct scu_port_task_scheduler_registers {
+ u32 control;
+ u32 status;
+};
+
+/**
+ * struct scu_port_task_scheduler_group_registers - These are the PORT Task
+ * Scheduler registers
+ *
+ *
+ */
+struct scu_port_task_scheduler_group_registers {
+/* 0x0000 PTSGCR */
+ u32 control;
+/* 0x0004 RTCR */
+ u32 real_time_clock;
+/* 0x0008 RTCCR */
+ u32 real_time_clock_control;
+/* 0x000C */
+ u32 reserved_0C;
+/*
+ * 0x0010 PTS0CR
+ * 0x0014 PTS0SR
+ * 0x0018 PTS1CR
+ * 0x001C PTS1SR
+ * 0x0020 PTS2CR
+ * 0x0024 PTS2SR
+ * 0x0028 PTS3CR
+ * 0x002C PTS3SR */
+ struct scu_port_task_scheduler_registers port[4];
+/*
+ * 0x0030 PCSPE0CR
+ * 0x0034 PCSPE1CR
+ * 0x0038 PCSPE2CR
+ * 0x003C PCSPE3CR */
+ u32 protocol_engine[4];
+/* 0x0040 ETMTSCCR */
+ u32 tc_scanning_interval_control;
+/* 0x0044 ETMRNSCCR */
+ u32 rnc_scanning_interval_control;
+/* Remainder of memory space 128 bytes */
+ u32 reserved_1048_107f[0x0E];
+
+};
+
+#define SCU_PTSG_SCUVZECR_OFFSET 0x003C
+
+/*
+ * *****************************************************************************
+ * * AFE REGISTERS
+ * ***************************************************************************** */
+#define SCU_AFE_MMR_BASE 0xE000
+
+/*
+ * AFE 0 is at offset 0x0800
+ * AFE 1 is at offset 0x0900
+ * AFE 2 is at offset 0x0a00
+ * AFE 3 is at offset 0x0b00 */
+struct scu_afe_transceiver {
+ /* 0x0000 AFE_XCVR_CTRL0 */
+ u32 afe_xcvr_control0;
+ /* 0x0004 AFE_XCVR_CTRL1 */
+ u32 afe_xcvr_control1;
+ /* 0x0008 */
+ u32 reserved_0008;
+ /* 0x000c afe_dfx_rx_control0 */
+ u32 afe_dfx_rx_control0;
+ /* 0x0010 AFE_DFX_RX_CTRL1 */
+ u32 afe_dfx_rx_control1;
+ /* 0x0014 */
+ u32 reserved_0014;
+ /* 0x0018 AFE_DFX_RX_STS0 */
+ u32 afe_dfx_rx_status0;
+ /* 0x001c AFE_DFX_RX_STS1 */
+ u32 afe_dfx_rx_status1;
+ /* 0x0020 */
+ u32 reserved_0020;
+ /* 0x0024 AFE_TX_CTRL */
+ u32 afe_tx_control;
+ /* 0x0028 AFE_TX_AMP_CTRL0 */
+ u32 afe_tx_amp_control0;
+ /* 0x002c AFE_TX_AMP_CTRL1 */
+ u32 afe_tx_amp_control1;
+ /* 0x0030 AFE_TX_AMP_CTRL2 */
+ u32 afe_tx_amp_control2;
+ /* 0x0034 AFE_TX_AMP_CTRL3 */
+ u32 afe_tx_amp_control3;
+ /* 0x0038 afe_tx_ssc_control */
+ u32 afe_tx_ssc_control;
+ /* 0x003c */
+ u32 reserved_003c;
+ /* 0x0040 AFE_RX_SSC_CTRL0 */
+ u32 afe_rx_ssc_control0;
+ /* 0x0044 AFE_RX_SSC_CTRL1 */
+ u32 afe_rx_ssc_control1;
+ /* 0x0048 AFE_RX_SSC_CTRL2 */
+ u32 afe_rx_ssc_control2;
+ /* 0x004c AFE_RX_EQ_STS0 */
+ u32 afe_rx_eq_status0;
+ /* 0x0050 AFE_RX_EQ_STS1 */
+ u32 afe_rx_eq_status1;
+ /* 0x0054 AFE_RX_CDR_STS */
+ u32 afe_rx_cdr_status;
+ /* 0x0058 */
+ u32 reserved_0058;
+ /* 0x005c AFE_CHAN_CTRL */
+ u32 afe_channel_control;
+ /* 0x0060-0x006c */
+ u32 reserved_0060_006c[0x04];
+ /* 0x0070 AFE_XCVR_EC_STS0 */
+ u32 afe_xcvr_error_capture_status0;
+ /* 0x0074 AFE_XCVR_EC_STS1 */
+ u32 afe_xcvr_error_capture_status1;
+ /* 0x0078 AFE_XCVR_EC_STS2 */
+ u32 afe_xcvr_error_capture_status2;
+ /* 0x007c afe_xcvr_ec_status3 */
+ u32 afe_xcvr_error_capture_status3;
+ /* 0x0080 AFE_XCVR_EC_STS4 */
+ u32 afe_xcvr_error_capture_status4;
+ /* 0x0084 AFE_XCVR_EC_STS5 */
+ u32 afe_xcvr_error_capture_status5;
+ /* 0x0088-0x00fc */
+ u32 reserved_008c_00fc[0x1e];
+};
+
+/**
+ * struct scu_afe_registers - AFE Regsiters
+ *
+ *
+ */
+/* Uaoa AFE registers */
+struct scu_afe_registers {
+ /* 0Xe000 AFE_BIAS_CTRL */
+ u32 afe_bias_control;
+ u32 reserved_0004;
+ /* 0x0008 AFE_PLL_CTRL0 */
+ u32 afe_pll_control0;
+ /* 0x000c AFE_PLL_CTRL1 */
+ u32 afe_pll_control1;
+ /* 0x0010 AFE_PLL_CTRL2 */
+ u32 afe_pll_control2;
+ /* 0x0014 AFE_CB_STS */
+ u32 afe_common_block_status;
+ /* 0x0018-0x007c */
+ u32 reserved_18_7c[0x1a];
+ /* 0x0080 AFE_PMSN_MCTRL0 */
+ u32 afe_pmsn_master_control0;
+ /* 0x0084 AFE_PMSN_MCTRL1 */
+ u32 afe_pmsn_master_control1;
+ /* 0x0088 AFE_PMSN_MCTRL2 */
+ u32 afe_pmsn_master_control2;
+ /* 0x008C-0x00fc */
+ u32 reserved_008c_00fc[0x1D];
+ /* 0x0100 AFE_DFX_MST_CTRL0 */
+ u32 afe_dfx_master_control0;
+ /* 0x0104 AFE_DFX_MST_CTRL1 */
+ u32 afe_dfx_master_control1;
+ /* 0x0108 AFE_DFX_DCL_CTRL */
+ u32 afe_dfx_dcl_control;
+ /* 0x010c AFE_DFX_DMON_CTRL */
+ u32 afe_dfx_digital_monitor_control;
+ /* 0x0110 AFE_DFX_AMONP_CTRL */
+ u32 afe_dfx_analog_p_monitor_control;
+ /* 0x0114 AFE_DFX_AMONN_CTRL */
+ u32 afe_dfx_analog_n_monitor_control;
+ /* 0x0118 AFE_DFX_NTL_STS */
+ u32 afe_dfx_ntl_status;
+ /* 0x011c AFE_DFX_FIFO_STS0 */
+ u32 afe_dfx_fifo_status0;
+ /* 0x0120 AFE_DFX_FIFO_STS1 */
+ u32 afe_dfx_fifo_status1;
+ /* 0x0124 AFE_DFX_MPAT_CTRL */
+ u32 afe_dfx_master_pattern_control;
+ /* 0x0128 AFE_DFX_P0_CTRL */
+ u32 afe_dfx_p0_control;
+ /* 0x012c-0x01a8 AFE_DFX_P0_DRx */
+ u32 afe_dfx_p0_data[32];
+ /* 0x01ac */
+ u32 reserved_01ac;
+ /* 0x01b0-0x020c AFE_DFX_P0_IRx */
+ u32 afe_dfx_p0_instruction[24];
+ /* 0x0210 */
+ u32 reserved_0210;
+ /* 0x0214 AFE_DFX_P1_CTRL */
+ u32 afe_dfx_p1_control;
+ /* 0x0218-0x245 AFE_DFX_P1_DRx */
+ u32 afe_dfx_p1_data[16];
+ /* 0x0258-0x029c */
+ u32 reserved_0258_029c[0x12];
+ /* 0x02a0-0x02bc AFE_DFX_P1_IRx */
+ u32 afe_dfx_p1_instruction[8];
+ /* 0x02c0-0x2fc */
+ u32 reserved_02c0_02fc[0x10];
+ /* 0x0300 AFE_DFX_TX_PMSN_CTRL */
+ u32 afe_dfx_tx_pmsn_control;
+ /* 0x0304 AFE_DFX_RX_PMSN_CTRL */
+ u32 afe_dfx_rx_pmsn_control;
+ u32 reserved_0308;
+ /* 0x030c AFE_DFX_NOA_CTRL0 */
+ u32 afe_dfx_noa_control0;
+ /* 0x0310 AFE_DFX_NOA_CTRL1 */
+ u32 afe_dfx_noa_control1;
+ /* 0x0314 AFE_DFX_NOA_CTRL2 */
+ u32 afe_dfx_noa_control2;
+ /* 0x0318 AFE_DFX_NOA_CTRL3 */
+ u32 afe_dfx_noa_control3;
+ /* 0x031c AFE_DFX_NOA_CTRL4 */
+ u32 afe_dfx_noa_control4;
+ /* 0x0320 AFE_DFX_NOA_CTRL5 */
+ u32 afe_dfx_noa_control5;
+ /* 0x0324 AFE_DFX_NOA_CTRL6 */
+ u32 afe_dfx_noa_control6;
+ /* 0x0328 AFE_DFX_NOA_CTRL7 */
+ u32 afe_dfx_noa_control7;
+ /* 0x032c-0x07fc */
+ u32 reserved_032c_07fc[0x135];
+
+ /* 0x0800-0x0bfc */
+ struct scu_afe_transceiver scu_afe_xcvr[4];
+
+ /* 0x0c00-0x0ffc */
+ u32 reserved_0c00_0ffc[0x0100];
+};
+
+struct scu_protocol_engine_group_registers {
+ u32 table[0xE0];
+};
+
+
+struct scu_viit_iit {
+ u32 table[256];
+};
+
+/**
+ * Placeholder for the ZONE Partition Table information ZONING will not be
+ * included in the 1.1 release.
+ *
+ *
+ */
+struct scu_zone_partition_table {
+ u32 table[2048];
+};
+
+/**
+ * Placeholder for the CRAM register since I am not sure if we need to
+ * read/write to these registers as yet.
+ *
+ *
+ */
+struct scu_completion_ram {
+ u32 ram[128];
+};
+
+/**
+ * Placeholder for the FBRAM registers since I am not sure if we need to
+ * read/write to these registers as yet.
+ *
+ *
+ */
+struct scu_frame_buffer_ram {
+ u32 ram[128];
+};
+
+#define scu_scratch_ram_SIZE_IN_DWORDS 256
+
+/**
+ * Placeholder for the scratch RAM registers.
+ *
+ *
+ */
+struct scu_scratch_ram {
+ u32 ram[scu_scratch_ram_SIZE_IN_DWORDS];
+};
+
+/**
+ * Placeholder since I am not yet sure what these registers are here for.
+ *
+ *
+ */
+struct noa_protocol_engine_partition {
+ u32 reserved[64];
+};
+
+/**
+ * Placeholder since I am not yet sure what these registers are here for.
+ *
+ *
+ */
+struct noa_hub_partition {
+ u32 reserved[64];
+};
+
+/**
+ * Placeholder since I am not yet sure what these registers are here for.
+ *
+ *
+ */
+struct noa_host_interface_partition {
+ u32 reserved[64];
+};
+
+/**
+ * struct transport_link_layer_pair - The SCU Hardware pairs up the TL
+ * registers with the LL registers so we must place them adjcent to make the
+ * array of registers in the PEG.
+ *
+ *
+ */
+struct transport_link_layer_pair {
+ struct scu_transport_layer_registers tl;
+ struct scu_link_layer_registers ll;
+};
+
+/**
+ * struct scu_peg_registers - SCU Protocol Engine Memory mapped register space.
+ * These registers are unique to each protocol engine group. There can be
+ * at most two PEG for a single SCU part.
+ *
+ *
+ */
+struct scu_peg_registers {
+ struct transport_link_layer_pair pe[4];
+ struct scu_port_task_scheduler_group_registers ptsg;
+ struct scu_protocol_engine_group_registers peg;
+ struct scu_sgpio_registers sgpio;
+ u32 reserved_01500_1BFF[0x1C0];
+ struct scu_viit_entry viit[64];
+ struct scu_zone_partition_table zpt0;
+ struct scu_zone_partition_table zpt1;
+};
+
+/**
+ * struct scu_registers - SCU regsiters including both PEG registers if we turn
+ * on that compile option. All of these registers are in the memory mapped
+ * space returned from BAR1.
+ *
+ *
+ */
+struct scu_registers {
+ /* 0x0000 - PEG 0 */
+ struct scu_peg_registers peg0;
+
+ /* 0x6000 - SDMA and Miscellaneous */
+ struct scu_sdma_registers sdma;
+ struct scu_completion_ram cram;
+ struct scu_frame_buffer_ram fbram;
+ u32 reserved_6800_69FF[0x80];
+ struct noa_protocol_engine_partition noa_pe;
+ struct noa_hub_partition noa_hub;
+ struct noa_host_interface_partition noa_if;
+ u32 reserved_6d00_7fff[0x4c0];
+
+ /* 0x8000 - PEG 1 */
+ struct scu_peg_registers peg1;
+
+ /* 0xE000 - AFE Registers */
+ struct scu_afe_registers afe;
+
+ /* 0xF000 - reserved */
+ u32 reserved_f000_211fff[0x80c00];
+
+ /* 0x212000 - scratch RAM */
+ struct scu_scratch_ram scratch_ram;
+};
+
+#endif /* _SCU_REGISTERS_HEADER_ */
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
new file mode 100644
index 0000000..b6e6368
--- /dev/null
+++ b/drivers/scsi/isci/remote_device.c
@@ -0,0 +1,1501 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <scsi/sas.h>
+#include "isci.h"
+#include "port.h"
+#include "remote_device.h"
+#include "request.h"
+#include "remote_node_context.h"
+#include "scu_event_codes.h"
+#include "task.h"
+
+/**
+ * isci_remote_device_not_ready() - This function is called by the ihost when
+ * the remote device is not ready. We mark the isci device as ready (not
+ * "ready_for_io") and signal the waiting proccess.
+ * @isci_host: This parameter specifies the isci host object.
+ * @isci_device: This parameter specifies the remote device
+ *
+ * sci_lock is held on entrance to this function.
+ */
+static void isci_remote_device_not_ready(struct isci_host *ihost,
+ struct isci_remote_device *idev, u32 reason)
+{
+ struct isci_request *ireq;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: isci_device = %p\n", __func__, idev);
+
+ switch (reason) {
+ case SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED:
+ set_bit(IDEV_GONE, &idev->flags);
+ break;
+ case SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED:
+ set_bit(IDEV_IO_NCQERROR, &idev->flags);
+
+ /* Kill all outstanding requests for the device. */
+ list_for_each_entry(ireq, &idev->reqs_in_process, dev_node) {
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: isci_device = %p request = %p\n",
+ __func__, idev, ireq);
+
+ sci_controller_terminate_request(ihost,
+ idev,
+ ireq);
+ }
+ /* Fall through into the default case... */
+ default:
+ clear_bit(IDEV_IO_READY, &idev->flags);
+ break;
+ }
+}
+
+/**
+ * isci_remote_device_ready() - This function is called by the ihost when the
+ * remote device is ready. We mark the isci device as ready and signal the
+ * waiting proccess.
+ * @ihost: our valid isci_host
+ * @idev: remote device
+ *
+ */
+static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote_device *idev)
+{
+ dev_dbg(&ihost->pdev->dev,
+ "%s: idev = %p\n", __func__, idev);
+
+ clear_bit(IDEV_IO_NCQERROR, &idev->flags);
+ set_bit(IDEV_IO_READY, &idev->flags);
+ if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags))
+ wake_up(&ihost->eventq);
+}
+
+/* called once the remote node context is ready to be freed.
+ * The remote device can now report that its stop operation is complete. none
+ */
+static void rnc_destruct_done(void *_dev)
+{
+ struct isci_remote_device *idev = _dev;
+
+ BUG_ON(idev->started_request_count != 0);
+ sci_change_state(&idev->sm, SCI_DEV_STOPPED);
+}
+
+static enum sci_status sci_remote_device_terminate_requests(struct isci_remote_device *idev)
+{
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+ enum sci_status status = SCI_SUCCESS;
+ u32 i;
+
+ for (i = 0; i < SCI_MAX_IO_REQUESTS; i++) {
+ struct isci_request *ireq = ihost->reqs[i];
+ enum sci_status s;
+
+ if (!test_bit(IREQ_ACTIVE, &ireq->flags) ||
+ ireq->target_device != idev)
+ continue;
+
+ s = sci_controller_terminate_request(ihost, idev, ireq);
+ if (s != SCI_SUCCESS)
+ status = s;
+ }
+
+ return status;
+}
+
+enum sci_status sci_remote_device_stop(struct isci_remote_device *idev,
+ u32 timeout)
+{
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
+
+ switch (state) {
+ case SCI_DEV_INITIAL:
+ case SCI_DEV_FAILED:
+ case SCI_DEV_FINAL:
+ default:
+ dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
+ __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ case SCI_DEV_STOPPED:
+ return SCI_SUCCESS;
+ case SCI_DEV_STARTING:
+ /* device not started so there had better be no requests */
+ BUG_ON(idev->started_request_count != 0);
+ sci_remote_node_context_destruct(&idev->rnc,
+ rnc_destruct_done, idev);
+ /* Transition to the stopping state and wait for the
+ * remote node to complete being posted and invalidated.
+ */
+ sci_change_state(sm, SCI_DEV_STOPPING);
+ return SCI_SUCCESS;
+ case SCI_DEV_READY:
+ case SCI_STP_DEV_IDLE:
+ case SCI_STP_DEV_CMD:
+ case SCI_STP_DEV_NCQ:
+ case SCI_STP_DEV_NCQ_ERROR:
+ case SCI_STP_DEV_AWAIT_RESET:
+ case SCI_SMP_DEV_IDLE:
+ case SCI_SMP_DEV_CMD:
+ sci_change_state(sm, SCI_DEV_STOPPING);
+ if (idev->started_request_count == 0) {
+ sci_remote_node_context_destruct(&idev->rnc,
+ rnc_destruct_done, idev);
+ return SCI_SUCCESS;
+ } else
+ return sci_remote_device_terminate_requests(idev);
+ break;
+ case SCI_DEV_STOPPING:
+ /* All requests should have been terminated, but if there is an
+ * attempt to stop a device already in the stopping state, then
+ * try again to terminate.
+ */
+ return sci_remote_device_terminate_requests(idev);
+ case SCI_DEV_RESETTING:
+ sci_change_state(sm, SCI_DEV_STOPPING);
+ return SCI_SUCCESS;
+ }
+}
+
+enum sci_status sci_remote_device_reset(struct isci_remote_device *idev)
+{
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
+
+ switch (state) {
+ case SCI_DEV_INITIAL:
+ case SCI_DEV_STOPPED:
+ case SCI_DEV_STARTING:
+ case SCI_SMP_DEV_IDLE:
+ case SCI_SMP_DEV_CMD:
+ case SCI_DEV_STOPPING:
+ case SCI_DEV_FAILED:
+ case SCI_DEV_RESETTING:
+ case SCI_DEV_FINAL:
+ default:
+ dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
+ __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ case SCI_DEV_READY:
+ case SCI_STP_DEV_IDLE:
+ case SCI_STP_DEV_CMD:
+ case SCI_STP_DEV_NCQ:
+ case SCI_STP_DEV_NCQ_ERROR:
+ case SCI_STP_DEV_AWAIT_RESET:
+ sci_change_state(sm, SCI_DEV_RESETTING);
+ return SCI_SUCCESS;
+ }
+}
+
+enum sci_status sci_remote_device_reset_complete(struct isci_remote_device *idev)
+{
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
+
+ if (state != SCI_DEV_RESETTING) {
+ dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
+ __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ sci_change_state(sm, SCI_DEV_READY);
+ return SCI_SUCCESS;
+}
+
+enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev,
+ u32 suspend_type)
+{
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
+
+ if (state != SCI_STP_DEV_CMD) {
+ dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
+ __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ return sci_remote_node_context_suspend(&idev->rnc,
+ suspend_type, NULL, NULL);
+}
+
+enum sci_status sci_remote_device_frame_handler(struct isci_remote_device *idev,
+ u32 frame_index)
+{
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+ enum sci_status status;
+
+ switch (state) {
+ case SCI_DEV_INITIAL:
+ case SCI_DEV_STOPPED:
+ case SCI_DEV_STARTING:
+ case SCI_STP_DEV_IDLE:
+ case SCI_SMP_DEV_IDLE:
+ case SCI_DEV_FINAL:
+ default:
+ dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
+ __func__, state);
+ /* Return the frame back to the controller */
+ sci_controller_release_frame(ihost, frame_index);
+ return SCI_FAILURE_INVALID_STATE;
+ case SCI_DEV_READY:
+ case SCI_STP_DEV_NCQ_ERROR:
+ case SCI_STP_DEV_AWAIT_RESET:
+ case SCI_DEV_STOPPING:
+ case SCI_DEV_FAILED:
+ case SCI_DEV_RESETTING: {
+ struct isci_request *ireq;
+ struct ssp_frame_hdr hdr;
+ void *frame_header;
+ ssize_t word_cnt;
+
+ status = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ &frame_header);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ word_cnt = sizeof(hdr) / sizeof(u32);
+ sci_swab32_cpy(&hdr, frame_header, word_cnt);
+
+ ireq = sci_request_by_tag(ihost, be16_to_cpu(hdr.tag));
+ if (ireq && ireq->target_device == idev) {
+ /* The IO request is now in charge of releasing the frame */
+ status = sci_io_request_frame_handler(ireq, frame_index);
+ } else {
+ /* We could not map this tag to a valid IO
+ * request Just toss the frame and continue
+ */
+ sci_controller_release_frame(ihost, frame_index);
+ }
+ break;
+ }
+ case SCI_STP_DEV_NCQ: {
+ struct dev_to_host_fis *hdr;
+
+ status = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ (void **)&hdr);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ if (hdr->fis_type == FIS_SETDEVBITS &&
+ (hdr->status & ATA_ERR)) {
+ idev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED;
+
+ /* TODO Check sactive and complete associated IO if any. */
+ sci_change_state(sm, SCI_STP_DEV_NCQ_ERROR);
+ } else if (hdr->fis_type == FIS_REGD2H &&
+ (hdr->status & ATA_ERR)) {
+ /*
+ * Some devices return D2H FIS when an NCQ error is detected.
+ * Treat this like an SDB error FIS ready reason.
+ */
+ idev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED;
+ sci_change_state(&idev->sm, SCI_STP_DEV_NCQ_ERROR);
+ } else
+ status = SCI_FAILURE;
+
+ sci_controller_release_frame(ihost, frame_index);
+ break;
+ }
+ case SCI_STP_DEV_CMD:
+ case SCI_SMP_DEV_CMD:
+ /* The device does not process any UF received from the hardware while
+ * in this state. All unsolicited frames are forwarded to the io request
+ * object.
+ */
+ status = sci_io_request_frame_handler(idev->working_request, frame_index);
+ break;
+ }
+
+ return status;
+}
+
+static bool is_remote_device_ready(struct isci_remote_device *idev)
+{
+
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
+
+ switch (state) {
+ case SCI_DEV_READY:
+ case SCI_STP_DEV_IDLE:
+ case SCI_STP_DEV_CMD:
+ case SCI_STP_DEV_NCQ:
+ case SCI_STP_DEV_NCQ_ERROR:
+ case SCI_STP_DEV_AWAIT_RESET:
+ case SCI_SMP_DEV_IDLE:
+ case SCI_SMP_DEV_CMD:
+ return true;
+ default:
+ return false;
+ }
+}
+
+enum sci_status sci_remote_device_event_handler(struct isci_remote_device *idev,
+ u32 event_code)
+{
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
+ enum sci_status status;
+
+ switch (scu_get_event_type(event_code)) {
+ case SCU_EVENT_TYPE_RNC_OPS_MISC:
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX:
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
+ status = sci_remote_node_context_event_handler(&idev->rnc, event_code);
+ break;
+ case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT:
+ if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) {
+ status = SCI_SUCCESS;
+
+ /* Suspend the associated RNC */
+ sci_remote_node_context_suspend(&idev->rnc,
+ SCI_SOFTWARE_SUSPENSION,
+ NULL, NULL);
+
+ dev_dbg(scirdev_to_dev(idev),
+ "%s: device: %p event code: %x: %s\n",
+ __func__, idev, event_code,
+ is_remote_device_ready(idev)
+ ? "I_T_Nexus_Timeout event"
+ : "I_T_Nexus_Timeout event in wrong state");
+
+ break;
+ }
+ /* Else, fall through and treat as unhandled... */
+ default:
+ dev_dbg(scirdev_to_dev(idev),
+ "%s: device: %p event code: %x: %s\n",
+ __func__, idev, event_code,
+ is_remote_device_ready(idev)
+ ? "unexpected event"
+ : "unexpected event in wrong state");
+ status = SCI_FAILURE_INVALID_STATE;
+ break;
+ }
+
+ if (status != SCI_SUCCESS)
+ return status;
+
+ if (state == SCI_STP_DEV_IDLE) {
+
+ /* We pick up suspension events to handle specifically to this
+ * state. We resume the RNC right away.
+ */
+ if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX ||
+ scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX)
+ status = sci_remote_node_context_resume(&idev->rnc, NULL, NULL);
+ }
+
+ return status;
+}
+
+static void sci_remote_device_start_request(struct isci_remote_device *idev,
+ struct isci_request *ireq,
+ enum sci_status status)
+{
+ struct isci_port *iport = idev->owning_port;
+
+ /* cleanup requests that failed after starting on the port */
+ if (status != SCI_SUCCESS)
+ sci_port_complete_io(iport, idev, ireq);
+ else {
+ kref_get(&idev->kref);
+ idev->started_request_count++;
+ }
+}
+
+enum sci_status sci_remote_device_start_io(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
+ struct isci_port *iport = idev->owning_port;
+ enum sci_status status;
+
+ switch (state) {
+ case SCI_DEV_INITIAL:
+ case SCI_DEV_STOPPED:
+ case SCI_DEV_STARTING:
+ case SCI_STP_DEV_NCQ_ERROR:
+ case SCI_DEV_STOPPING:
+ case SCI_DEV_FAILED:
+ case SCI_DEV_RESETTING:
+ case SCI_DEV_FINAL:
+ default:
+ dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
+ __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ case SCI_DEV_READY:
+ /* attempt to start an io request for this device object. The remote
+ * device object will issue the start request for the io and if
+ * successful it will start the request for the port object then
+ * increment its own request count.
+ */
+ status = sci_port_start_io(iport, idev, ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ status = sci_remote_node_context_start_io(&idev->rnc, ireq);
+ if (status != SCI_SUCCESS)
+ break;
+
+ status = sci_request_start(ireq);
+ break;
+ case SCI_STP_DEV_IDLE: {
+ /* handle the start io operation for a sata device that is in
+ * the command idle state. - Evalute the type of IO request to
+ * be started - If its an NCQ request change to NCQ substate -
+ * If its any other command change to the CMD substate
+ *
+ * If this is a softreset we may want to have a different
+ * substate.
+ */
+ enum sci_remote_device_states new_state;
+ struct sas_task *task = isci_request_access_task(ireq);
+
+ status = sci_port_start_io(iport, idev, ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ status = sci_remote_node_context_start_io(&idev->rnc, ireq);
+ if (status != SCI_SUCCESS)
+ break;
+
+ status = sci_request_start(ireq);
+ if (status != SCI_SUCCESS)
+ break;
+
+ if (task->ata_task.use_ncq)
+ new_state = SCI_STP_DEV_NCQ;
+ else {
+ idev->working_request = ireq;
+ new_state = SCI_STP_DEV_CMD;
+ }
+ sci_change_state(sm, new_state);
+ break;
+ }
+ case SCI_STP_DEV_NCQ: {
+ struct sas_task *task = isci_request_access_task(ireq);
+
+ if (task->ata_task.use_ncq) {
+ status = sci_port_start_io(iport, idev, ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ status = sci_remote_node_context_start_io(&idev->rnc, ireq);
+ if (status != SCI_SUCCESS)
+ break;
+
+ status = sci_request_start(ireq);
+ } else
+ return SCI_FAILURE_INVALID_STATE;
+ break;
+ }
+ case SCI_STP_DEV_AWAIT_RESET:
+ return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED;
+ case SCI_SMP_DEV_IDLE:
+ status = sci_port_start_io(iport, idev, ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ status = sci_remote_node_context_start_io(&idev->rnc, ireq);
+ if (status != SCI_SUCCESS)
+ break;
+
+ status = sci_request_start(ireq);
+ if (status != SCI_SUCCESS)
+ break;
+
+ idev->working_request = ireq;
+ sci_change_state(&idev->sm, SCI_SMP_DEV_CMD);
+ break;
+ case SCI_STP_DEV_CMD:
+ case SCI_SMP_DEV_CMD:
+ /* device is already handling a command it can not accept new commands
+ * until this one is complete.
+ */
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ sci_remote_device_start_request(idev, ireq, status);
+ return status;
+}
+
+static enum sci_status common_complete_io(struct isci_port *iport,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ enum sci_status status;
+
+ status = sci_request_complete(ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ status = sci_port_complete_io(iport, idev, ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ sci_remote_device_decrement_request_count(idev);
+ return status;
+}
+
+enum sci_status sci_remote_device_complete_io(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
+ struct isci_port *iport = idev->owning_port;
+ enum sci_status status;
+
+ switch (state) {
+ case SCI_DEV_INITIAL:
+ case SCI_DEV_STOPPED:
+ case SCI_DEV_STARTING:
+ case SCI_STP_DEV_IDLE:
+ case SCI_SMP_DEV_IDLE:
+ case SCI_DEV_FAILED:
+ case SCI_DEV_FINAL:
+ default:
+ dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
+ __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ case SCI_DEV_READY:
+ case SCI_STP_DEV_AWAIT_RESET:
+ case SCI_DEV_RESETTING:
+ status = common_complete_io(iport, idev, ireq);
+ break;
+ case SCI_STP_DEV_CMD:
+ case SCI_STP_DEV_NCQ:
+ case SCI_STP_DEV_NCQ_ERROR:
+ status = common_complete_io(iport, idev, ireq);
+ if (status != SCI_SUCCESS)
+ break;
+
+ if (ireq->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) {
+ /* This request causes hardware error, device needs to be Lun Reset.
+ * So here we force the state machine to IDLE state so the rest IOs
+ * can reach RNC state handler, these IOs will be completed by RNC with
+ * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE".
+ */
+ sci_change_state(sm, SCI_STP_DEV_AWAIT_RESET);
+ } else if (idev->started_request_count == 0)
+ sci_change_state(sm, SCI_STP_DEV_IDLE);
+ break;
+ case SCI_SMP_DEV_CMD:
+ status = common_complete_io(iport, idev, ireq);
+ if (status != SCI_SUCCESS)
+ break;
+ sci_change_state(sm, SCI_SMP_DEV_IDLE);
+ break;
+ case SCI_DEV_STOPPING:
+ status = common_complete_io(iport, idev, ireq);
+ if (status != SCI_SUCCESS)
+ break;
+
+ if (idev->started_request_count == 0)
+ sci_remote_node_context_destruct(&idev->rnc,
+ rnc_destruct_done,
+ idev);
+ break;
+ }
+
+ if (status != SCI_SUCCESS)
+ dev_err(scirdev_to_dev(idev),
+ "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x "
+ "could not complete\n", __func__, iport,
+ idev, ireq, status);
+ else
+ isci_put_device(idev);
+
+ return status;
+}
+
+static void sci_remote_device_continue_request(void *dev)
+{
+ struct isci_remote_device *idev = dev;
+
+ /* we need to check if this request is still valid to continue. */
+ if (idev->working_request)
+ sci_controller_continue_io(idev->working_request);
+}
+
+enum sci_status sci_remote_device_start_task(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
+ struct isci_port *iport = idev->owning_port;
+ enum sci_status status;
+
+ switch (state) {
+ case SCI_DEV_INITIAL:
+ case SCI_DEV_STOPPED:
+ case SCI_DEV_STARTING:
+ case SCI_SMP_DEV_IDLE:
+ case SCI_SMP_DEV_CMD:
+ case SCI_DEV_STOPPING:
+ case SCI_DEV_FAILED:
+ case SCI_DEV_RESETTING:
+ case SCI_DEV_FINAL:
+ default:
+ dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
+ __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ case SCI_STP_DEV_IDLE:
+ case SCI_STP_DEV_CMD:
+ case SCI_STP_DEV_NCQ:
+ case SCI_STP_DEV_NCQ_ERROR:
+ case SCI_STP_DEV_AWAIT_RESET:
+ status = sci_port_start_io(iport, idev, ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ status = sci_remote_node_context_start_task(&idev->rnc, ireq);
+ if (status != SCI_SUCCESS)
+ goto out;
+
+ status = sci_request_start(ireq);
+ if (status != SCI_SUCCESS)
+ goto out;
+
+ /* Note: If the remote device state is not IDLE this will
+ * replace the request that probably resulted in the task
+ * management request.
+ */
+ idev->working_request = ireq;
+ sci_change_state(sm, SCI_STP_DEV_CMD);
+
+ /* The remote node context must cleanup the TCi to NCQ mapping
+ * table. The only way to do this correctly is to either write
+ * to the TLCR register or to invalidate and repost the RNC. In
+ * either case the remote node context state machine will take
+ * the correct action when the remote node context is suspended
+ * and later resumed.
+ */
+ sci_remote_node_context_suspend(&idev->rnc,
+ SCI_SOFTWARE_SUSPENSION, NULL, NULL);
+ sci_remote_node_context_resume(&idev->rnc,
+ sci_remote_device_continue_request,
+ idev);
+
+ out:
+ sci_remote_device_start_request(idev, ireq, status);
+ /* We need to let the controller start request handler know that
+ * it can't post TC yet. We will provide a callback function to
+ * post TC when RNC gets resumed.
+ */
+ return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS;
+ case SCI_DEV_READY:
+ status = sci_port_start_io(iport, idev, ireq);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ status = sci_remote_node_context_start_task(&idev->rnc, ireq);
+ if (status != SCI_SUCCESS)
+ break;
+
+ status = sci_request_start(ireq);
+ break;
+ }
+ sci_remote_device_start_request(idev, ireq, status);
+
+ return status;
+}
+
+void sci_remote_device_post_request(struct isci_remote_device *idev, u32 request)
+{
+ struct isci_port *iport = idev->owning_port;
+ u32 context;
+
+ context = request |
+ (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
+ (iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) |
+ idev->rnc.remote_node_index;
+
+ sci_controller_post_request(iport->owning_controller, context);
+}
+
+/* called once the remote node context has transisitioned to a
+ * ready state. This is the indication that the remote device object can also
+ * transition to ready.
+ */
+static void remote_device_resume_done(void *_dev)
+{
+ struct isci_remote_device *idev = _dev;
+
+ if (is_remote_device_ready(idev))
+ return;
+
+ /* go 'ready' if we are not already in a ready state */
+ sci_change_state(&idev->sm, SCI_DEV_READY);
+}
+
+static void sci_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev)
+{
+ struct isci_remote_device *idev = _dev;
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+
+ /* For NCQ operation we do not issue a isci_remote_device_not_ready().
+ * As a result, avoid sending the ready notification.
+ */
+ if (idev->sm.previous_state_id != SCI_STP_DEV_NCQ)
+ isci_remote_device_ready(ihost, idev);
+}
+
+static void sci_remote_device_initial_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+
+ /* Initial state is a transitional state to the stopped state */
+ sci_change_state(&idev->sm, SCI_DEV_STOPPED);
+}
+
+/**
+ * sci_remote_device_destruct() - free remote node context and destruct
+ * @remote_device: This parameter specifies the remote device to be destructed.
+ *
+ * Remote device objects are a limited resource. As such, they must be
+ * protected. Thus calls to construct and destruct are mutually exclusive and
+ * non-reentrant. The return value shall indicate if the device was
+ * successfully destructed or if some failure occurred. enum sci_status This value
+ * is returned if the device is successfully destructed.
+ * SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the supplied
+ * device isn't valid (e.g. it's already been destoryed, the handle isn't
+ * valid, etc.).
+ */
+static enum sci_status sci_remote_device_destruct(struct isci_remote_device *idev)
+{
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
+ struct isci_host *ihost;
+
+ if (state != SCI_DEV_STOPPED) {
+ dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
+ __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ ihost = idev->owning_port->owning_controller;
+ sci_controller_free_remote_node_context(ihost, idev,
+ idev->rnc.remote_node_index);
+ idev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX;
+ sci_change_state(sm, SCI_DEV_FINAL);
+
+ return SCI_SUCCESS;
+}
+
+/**
+ * isci_remote_device_deconstruct() - This function frees an isci_remote_device.
+ * @ihost: This parameter specifies the isci host object.
+ * @idev: This parameter specifies the remote device to be freed.
+ *
+ */
+static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_remote_device *idev)
+{
+ dev_dbg(&ihost->pdev->dev,
+ "%s: isci_device = %p\n", __func__, idev);
+
+ /* There should not be any outstanding io's. All paths to
+ * here should go through isci_remote_device_nuke_requests.
+ * If we hit this condition, we will need a way to complete
+ * io requests in process */
+ BUG_ON(!list_empty(&idev->reqs_in_process));
+
+ sci_remote_device_destruct(idev);
+ list_del_init(&idev->node);
+ isci_put_device(idev);
+}
+
+static void sci_remote_device_stopped_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+ u32 prev_state;
+
+ /* If we are entering from the stopping state let the SCI User know that
+ * the stop operation has completed.
+ */
+ prev_state = idev->sm.previous_state_id;
+ if (prev_state == SCI_DEV_STOPPING)
+ isci_remote_device_deconstruct(ihost, idev);
+
+ sci_controller_remote_device_stopped(ihost, idev);
+}
+
+static void sci_remote_device_starting_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+
+ isci_remote_device_not_ready(ihost, idev,
+ SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED);
+}
+
+static void sci_remote_device_ready_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+ struct domain_device *dev = idev->domain_dev;
+
+ if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) {
+ sci_change_state(&idev->sm, SCI_STP_DEV_IDLE);
+ } else if (dev_is_expander(dev)) {
+ sci_change_state(&idev->sm, SCI_SMP_DEV_IDLE);
+ } else
+ isci_remote_device_ready(ihost, idev);
+}
+
+static void sci_remote_device_ready_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+ struct domain_device *dev = idev->domain_dev;
+
+ if (dev->dev_type == SAS_END_DEV) {
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+
+ isci_remote_device_not_ready(ihost, idev,
+ SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED);
+ }
+}
+
+static void sci_remote_device_resetting_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+
+ sci_remote_node_context_suspend(
+ &idev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL);
+}
+
+static void sci_remote_device_resetting_state_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+
+ sci_remote_node_context_resume(&idev->rnc, NULL, NULL);
+}
+
+static void sci_stp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+
+ idev->working_request = NULL;
+ if (sci_remote_node_context_is_ready(&idev->rnc)) {
+ /*
+ * Since the RNC is ready, it's alright to finish completion
+ * processing (e.g. signal the remote device is ready). */
+ sci_stp_remote_device_ready_idle_substate_resume_complete_handler(idev);
+ } else {
+ sci_remote_node_context_resume(&idev->rnc,
+ sci_stp_remote_device_ready_idle_substate_resume_complete_handler,
+ idev);
+ }
+}
+
+static void sci_stp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+
+ BUG_ON(idev->working_request == NULL);
+
+ isci_remote_device_not_ready(ihost, idev,
+ SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED);
+}
+
+static void sci_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+
+ if (idev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED)
+ isci_remote_device_not_ready(ihost, idev,
+ idev->not_ready_reason);
+}
+
+static void sci_smp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+
+ isci_remote_device_ready(ihost, idev);
+}
+
+static void sci_smp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+
+ BUG_ON(idev->working_request == NULL);
+
+ isci_remote_device_not_ready(ihost, idev,
+ SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED);
+}
+
+static void sci_smp_remote_device_ready_cmd_substate_exit(struct sci_base_state_machine *sm)
+{
+ struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm);
+
+ idev->working_request = NULL;
+}
+
+static const struct sci_base_state sci_remote_device_state_table[] = {
+ [SCI_DEV_INITIAL] = {
+ .enter_state = sci_remote_device_initial_state_enter,
+ },
+ [SCI_DEV_STOPPED] = {
+ .enter_state = sci_remote_device_stopped_state_enter,
+ },
+ [SCI_DEV_STARTING] = {
+ .enter_state = sci_remote_device_starting_state_enter,
+ },
+ [SCI_DEV_READY] = {
+ .enter_state = sci_remote_device_ready_state_enter,
+ .exit_state = sci_remote_device_ready_state_exit
+ },
+ [SCI_STP_DEV_IDLE] = {
+ .enter_state = sci_stp_remote_device_ready_idle_substate_enter,
+ },
+ [SCI_STP_DEV_CMD] = {
+ .enter_state = sci_stp_remote_device_ready_cmd_substate_enter,
+ },
+ [SCI_STP_DEV_NCQ] = { },
+ [SCI_STP_DEV_NCQ_ERROR] = {
+ .enter_state = sci_stp_remote_device_ready_ncq_error_substate_enter,
+ },
+ [SCI_STP_DEV_AWAIT_RESET] = { },
+ [SCI_SMP_DEV_IDLE] = {
+ .enter_state = sci_smp_remote_device_ready_idle_substate_enter,
+ },
+ [SCI_SMP_DEV_CMD] = {
+ .enter_state = sci_smp_remote_device_ready_cmd_substate_enter,
+ .exit_state = sci_smp_remote_device_ready_cmd_substate_exit,
+ },
+ [SCI_DEV_STOPPING] = { },
+ [SCI_DEV_FAILED] = { },
+ [SCI_DEV_RESETTING] = {
+ .enter_state = sci_remote_device_resetting_state_enter,
+ .exit_state = sci_remote_device_resetting_state_exit
+ },
+ [SCI_DEV_FINAL] = { },
+};
+
+/**
+ * sci_remote_device_construct() - common construction
+ * @sci_port: SAS/SATA port through which this device is accessed.
+ * @sci_dev: remote device to construct
+ *
+ * This routine just performs benign initialization and does not
+ * allocate the remote_node_context which is left to
+ * sci_remote_device_[de]a_construct(). sci_remote_device_destruct()
+ * frees the remote_node_context(s) for the device.
+ */
+static void sci_remote_device_construct(struct isci_port *iport,
+ struct isci_remote_device *idev)
+{
+ idev->owning_port = iport;
+ idev->started_request_count = 0;
+
+ sci_init_sm(&idev->sm, sci_remote_device_state_table, SCI_DEV_INITIAL);
+
+ sci_remote_node_context_construct(&idev->rnc,
+ SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX);
+}
+
+/**
+ * sci_remote_device_da_construct() - construct direct attached device.
+ *
+ * The information (e.g. IAF, Signature FIS, etc.) necessary to build
+ * the device is known to the SCI Core since it is contained in the
+ * sci_phy object. Remote node context(s) is/are a global resource
+ * allocated by this routine, freed by sci_remote_device_destruct().
+ *
+ * Returns:
+ * SCI_FAILURE_DEVICE_EXISTS - device has already been constructed.
+ * SCI_FAILURE_UNSUPPORTED_PROTOCOL - e.g. sas device attached to
+ * sata-only controller instance.
+ * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted.
+ */
+static enum sci_status sci_remote_device_da_construct(struct isci_port *iport,
+ struct isci_remote_device *idev)
+{
+ enum sci_status status;
+ struct domain_device *dev = idev->domain_dev;
+
+ sci_remote_device_construct(iport, idev);
+
+ /*
+ * This information is request to determine how many remote node context
+ * entries will be needed to store the remote node.
+ */
+ idev->is_direct_attached = true;
+ status = sci_controller_allocate_remote_node_context(iport->owning_controller,
+ idev,
+ &idev->rnc.remote_node_index);
+
+ if (status != SCI_SUCCESS)
+ return status;
+
+ if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV ||
+ (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev))
+ /* pass */;
+ else
+ return SCI_FAILURE_UNSUPPORTED_PROTOCOL;
+
+ idev->connection_rate = sci_port_get_max_allowed_speed(iport);
+
+ /* / @todo Should I assign the port width by reading all of the phys on the port? */
+ idev->device_port_width = 1;
+
+ return SCI_SUCCESS;
+}
+
+/**
+ * sci_remote_device_ea_construct() - construct expander attached device
+ *
+ * Remote node context(s) is/are a global resource allocated by this
+ * routine, freed by sci_remote_device_destruct().
+ *
+ * Returns:
+ * SCI_FAILURE_DEVICE_EXISTS - device has already been constructed.
+ * SCI_FAILURE_UNSUPPORTED_PROTOCOL - e.g. sas device attached to
+ * sata-only controller instance.
+ * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted.
+ */
+static enum sci_status sci_remote_device_ea_construct(struct isci_port *iport,
+ struct isci_remote_device *idev)
+{
+ struct domain_device *dev = idev->domain_dev;
+ enum sci_status status;
+
+ sci_remote_device_construct(iport, idev);
+
+ status = sci_controller_allocate_remote_node_context(iport->owning_controller,
+ idev,
+ &idev->rnc.remote_node_index);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV ||
+ (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev))
+ /* pass */;
+ else
+ return SCI_FAILURE_UNSUPPORTED_PROTOCOL;
+
+ /*
+ * For SAS-2 the physical link rate is actually a logical link
+ * rate that incorporates multiplexing. The SCU doesn't
+ * incorporate multiplexing and for the purposes of the
+ * connection the logical link rate is that same as the
+ * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay
+ * one another, so this code works for both situations. */
+ idev->connection_rate = min_t(u16, sci_port_get_max_allowed_speed(iport),
+ dev->linkrate);
+
+ /* / @todo Should I assign the port width by reading all of the phys on the port? */
+ idev->device_port_width = 1;
+
+ return SCI_SUCCESS;
+}
+
+/**
+ * sci_remote_device_start() - This method will start the supplied remote
+ * device. This method enables normal IO requests to flow through to the
+ * remote device.
+ * @remote_device: This parameter specifies the device to be started.
+ * @timeout: This parameter specifies the number of milliseconds in which the
+ * start operation should complete.
+ *
+ * An indication of whether the device was successfully started. SCI_SUCCESS
+ * This value is returned if the device was successfully started.
+ * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start
+ * the device when there have been no phys added to it.
+ */
+static enum sci_status sci_remote_device_start(struct isci_remote_device *idev,
+ u32 timeout)
+{
+ struct sci_base_state_machine *sm = &idev->sm;
+ enum sci_remote_device_states state = sm->current_state_id;
+ enum sci_status status;
+
+ if (state != SCI_DEV_STOPPED) {
+ dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n",
+ __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ status = sci_remote_node_context_resume(&idev->rnc,
+ remote_device_resume_done,
+ idev);
+ if (status != SCI_SUCCESS)
+ return status;
+
+ sci_change_state(sm, SCI_DEV_STARTING);
+
+ return SCI_SUCCESS;
+}
+
+static enum sci_status isci_remote_device_construct(struct isci_port *iport,
+ struct isci_remote_device *idev)
+{
+ struct isci_host *ihost = iport->isci_host;
+ struct domain_device *dev = idev->domain_dev;
+ enum sci_status status;
+
+ if (dev->parent && dev_is_expander(dev->parent))
+ status = sci_remote_device_ea_construct(iport, idev);
+ else
+ status = sci_remote_device_da_construct(iport, idev);
+
+ if (status != SCI_SUCCESS) {
+ dev_dbg(&ihost->pdev->dev, "%s: construct failed: %d\n",
+ __func__, status);
+
+ return status;
+ }
+
+ /* start the device. */
+ status = sci_remote_device_start(idev, ISCI_REMOTE_DEVICE_START_TIMEOUT);
+
+ if (status != SCI_SUCCESS)
+ dev_warn(&ihost->pdev->dev, "remote device start failed: %d\n",
+ status);
+
+ return status;
+}
+
+void isci_remote_device_nuke_requests(struct isci_host *ihost, struct isci_remote_device *idev)
+{
+ DECLARE_COMPLETION_ONSTACK(aborted_task_completion);
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: idev = %p\n", __func__, idev);
+
+ /* Cleanup all requests pending for this device. */
+ isci_terminate_pending_requests(ihost, idev);
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: idev = %p, done\n", __func__, idev);
+}
+
+/**
+ * This function builds the isci_remote_device when a libsas dev_found message
+ * is received.
+ * @isci_host: This parameter specifies the isci host object.
+ * @port: This parameter specifies the isci_port conected to this device.
+ *
+ * pointer to new isci_remote_device.
+ */
+static struct isci_remote_device *
+isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport)
+{
+ struct isci_remote_device *idev;
+ int i;
+
+ for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) {
+ idev = &ihost->devices[i];
+ if (!test_and_set_bit(IDEV_ALLOCATED, &idev->flags))
+ break;
+ }
+
+ if (i >= SCI_MAX_REMOTE_DEVICES) {
+ dev_warn(&ihost->pdev->dev, "%s: failed\n", __func__);
+ return NULL;
+ }
+
+ if (WARN_ONCE(!list_empty(&idev->reqs_in_process), "found requests in process\n"))
+ return NULL;
+
+ if (WARN_ONCE(!list_empty(&idev->node), "found non-idle remote device\n"))
+ return NULL;
+
+ return idev;
+}
+
+void isci_remote_device_release(struct kref *kref)
+{
+ struct isci_remote_device *idev = container_of(kref, typeof(*idev), kref);
+ struct isci_host *ihost = idev->isci_port->isci_host;
+
+ idev->domain_dev = NULL;
+ idev->isci_port = NULL;
+ clear_bit(IDEV_START_PENDING, &idev->flags);
+ clear_bit(IDEV_STOP_PENDING, &idev->flags);
+ clear_bit(IDEV_IO_READY, &idev->flags);
+ clear_bit(IDEV_GONE, &idev->flags);
+ clear_bit(IDEV_EH, &idev->flags);
+ smp_mb__before_clear_bit();
+ clear_bit(IDEV_ALLOCATED, &idev->flags);
+ wake_up(&ihost->eventq);
+}
+
+/**
+ * isci_remote_device_stop() - This function is called internally to stop the
+ * remote device.
+ * @isci_host: This parameter specifies the isci host object.
+ * @isci_device: This parameter specifies the remote device.
+ *
+ * The status of the ihost request to stop.
+ */
+enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_remote_device *idev)
+{
+ enum sci_status status;
+ unsigned long flags;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: isci_device = %p\n", __func__, idev);
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ idev->domain_dev->lldd_dev = NULL; /* disable new lookups */
+ set_bit(IDEV_GONE, &idev->flags);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ /* Kill all outstanding requests. */
+ isci_remote_device_nuke_requests(ihost, idev);
+
+ set_bit(IDEV_STOP_PENDING, &idev->flags);
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ status = sci_remote_device_stop(idev, 50);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ /* Wait for the stop complete callback. */
+ if (WARN_ONCE(status != SCI_SUCCESS, "failed to stop device\n"))
+ /* nothing to wait for */;
+ else
+ wait_for_device_stop(ihost, idev);
+
+ return status;
+}
+
+/**
+ * isci_remote_device_gone() - This function is called by libsas when a domain
+ * device is removed.
+ * @domain_device: This parameter specifies the libsas domain device.
+ *
+ */
+void isci_remote_device_gone(struct domain_device *dev)
+{
+ struct isci_host *ihost = dev_to_ihost(dev);
+ struct isci_remote_device *idev = dev->lldd_dev;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: domain_device = %p, isci_device = %p, isci_port = %p\n",
+ __func__, dev, idev, idev->isci_port);
+
+ isci_remote_device_stop(ihost, idev);
+}
+
+
+/**
+ * isci_remote_device_found() - This function is called by libsas when a remote
+ * device is discovered. A remote device object is created and started. the
+ * function then sleeps until the sci core device started message is
+ * received.
+ * @domain_device: This parameter specifies the libsas domain device.
+ *
+ * status, zero indicates success.
+ */
+int isci_remote_device_found(struct domain_device *domain_dev)
+{
+ struct isci_host *isci_host = dev_to_ihost(domain_dev);
+ struct isci_port *isci_port;
+ struct isci_phy *isci_phy;
+ struct asd_sas_port *sas_port;
+ struct asd_sas_phy *sas_phy;
+ struct isci_remote_device *isci_device;
+ enum sci_status status;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: domain_device = %p\n", __func__, domain_dev);
+
+ wait_for_start(isci_host);
+
+ sas_port = domain_dev->port;
+ sas_phy = list_first_entry(&sas_port->phy_list, struct asd_sas_phy,
+ port_phy_el);
+ isci_phy = to_iphy(sas_phy);
+ isci_port = isci_phy->isci_port;
+
+ /* we are being called for a device on this port,
+ * so it has to come up eventually
+ */
+ wait_for_completion(&isci_port->start_complete);
+
+ if ((isci_stopping == isci_port_get_state(isci_port)) ||
+ (isci_stopped == isci_port_get_state(isci_port)))
+ return -ENODEV;
+
+ isci_device = isci_remote_device_alloc(isci_host, isci_port);
+ if (!isci_device)
+ return -ENODEV;
+
+ kref_init(&isci_device->kref);
+ INIT_LIST_HEAD(&isci_device->node);
+
+ spin_lock_irq(&isci_host->scic_lock);
+ isci_device->domain_dev = domain_dev;
+ isci_device->isci_port = isci_port;
+ list_add_tail(&isci_device->node, &isci_port->remote_dev_list);
+
+ set_bit(IDEV_START_PENDING, &isci_device->flags);
+ status = isci_remote_device_construct(isci_port, isci_device);
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device = %p\n",
+ __func__, isci_device);
+
+ if (status == SCI_SUCCESS) {
+ /* device came up, advertise it to the world */
+ domain_dev->lldd_dev = isci_device;
+ } else
+ isci_put_device(isci_device);
+ spin_unlock_irq(&isci_host->scic_lock);
+
+ /* wait for the device ready callback. */
+ wait_for_device_start(isci_host, isci_device);
+
+ return status == SCI_SUCCESS ? 0 : -ENODEV;
+}
+/**
+ * isci_device_is_reset_pending() - This function will check if there is any
+ * pending reset condition on the device.
+ * @request: This parameter is the isci_device object.
+ *
+ * true if there is a reset pending for the device.
+ */
+bool isci_device_is_reset_pending(
+ struct isci_host *isci_host,
+ struct isci_remote_device *isci_device)
+{
+ struct isci_request *isci_request;
+ struct isci_request *tmp_req;
+ bool reset_is_pending = false;
+ unsigned long flags;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device = %p\n", __func__, isci_device);
+
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+
+ /* Check for reset on all pending requests. */
+ list_for_each_entry_safe(isci_request, tmp_req,
+ &isci_device->reqs_in_process, dev_node) {
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device = %p request = %p\n",
+ __func__, isci_device, isci_request);
+
+ if (isci_request->ttype == io_task) {
+ struct sas_task *task = isci_request_access_task(
+ isci_request);
+
+ spin_lock(&task->task_state_lock);
+ if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)
+ reset_is_pending = true;
+ spin_unlock(&task->task_state_lock);
+ }
+ }
+
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device = %p reset_is_pending = %d\n",
+ __func__, isci_device, reset_is_pending);
+
+ return reset_is_pending;
+}
+
+/**
+ * isci_device_clear_reset_pending() - This function will clear if any pending
+ * reset condition flags on the device.
+ * @request: This parameter is the isci_device object.
+ *
+ * true if there is a reset pending for the device.
+ */
+void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev)
+{
+ struct isci_request *isci_request;
+ struct isci_request *tmp_req;
+ unsigned long flags = 0;
+
+ dev_dbg(&ihost->pdev->dev, "%s: idev=%p, ihost=%p\n",
+ __func__, idev, ihost);
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ /* Clear reset pending on all pending requests. */
+ list_for_each_entry_safe(isci_request, tmp_req,
+ &idev->reqs_in_process, dev_node) {
+ dev_dbg(&ihost->pdev->dev, "%s: idev = %p request = %p\n",
+ __func__, idev, isci_request);
+
+ if (isci_request->ttype == io_task) {
+
+ unsigned long flags2;
+ struct sas_task *task = isci_request_access_task(
+ isci_request);
+
+ spin_lock_irqsave(&task->task_state_lock, flags2);
+ task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET;
+ spin_unlock_irqrestore(&task->task_state_lock, flags2);
+ }
+ }
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
new file mode 100644
index 0000000..57ccfc3
--- /dev/null
+++ b/drivers/scsi/isci/remote_device.h
@@ -0,0 +1,352 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ISCI_REMOTE_DEVICE_H_
+#define _ISCI_REMOTE_DEVICE_H_
+#include <scsi/libsas.h>
+#include <linux/kref.h>
+#include "scu_remote_node_context.h"
+#include "remote_node_context.h"
+#include "port.h"
+
+enum sci_remote_device_not_ready_reason_code {
+ SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED,
+ SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED,
+ SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED,
+ SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED,
+ SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED,
+ SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX
+};
+
+/**
+ * isci_remote_device - isci representation of a sas expander / end point
+ * @device_port_width: hw setting for number of simultaneous connections
+ * @connection_rate: per-taskcontext connection rate for this device
+ * @working_request: SATA requests have no tag we for unaccelerated
+ * protocols we need a method to associate unsolicited
+ * frames with a pending request
+ */
+struct isci_remote_device {
+ #define IDEV_START_PENDING 0
+ #define IDEV_STOP_PENDING 1
+ #define IDEV_ALLOCATED 2
+ #define IDEV_EH 3
+ #define IDEV_GONE 4
+ #define IDEV_IO_READY 5
+ #define IDEV_IO_NCQERROR 6
+ unsigned long flags;
+ struct kref kref;
+ struct isci_port *isci_port;
+ struct domain_device *domain_dev;
+ struct list_head node;
+ struct list_head reqs_in_process;
+ struct sci_base_state_machine sm;
+ u32 device_port_width;
+ enum sas_linkrate connection_rate;
+ bool is_direct_attached;
+ struct isci_port *owning_port;
+ struct sci_remote_node_context rnc;
+ /* XXX unify with device reference counting and delete */
+ u32 started_request_count;
+ struct isci_request *working_request;
+ u32 not_ready_reason;
+};
+
+#define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000
+
+/* device reference routines must be called under sci_lock */
+static inline struct isci_remote_device *isci_lookup_device(struct domain_device *dev)
+{
+ struct isci_remote_device *idev = dev->lldd_dev;
+
+ if (idev && !test_bit(IDEV_GONE, &idev->flags)) {
+ kref_get(&idev->kref);
+ return idev;
+ }
+
+ return NULL;
+}
+
+void isci_remote_device_release(struct kref *kref);
+static inline void isci_put_device(struct isci_remote_device *idev)
+{
+ if (idev)
+ kref_put(&idev->kref, isci_remote_device_release);
+}
+
+enum sci_status isci_remote_device_stop(struct isci_host *ihost,
+ struct isci_remote_device *idev);
+void isci_remote_device_nuke_requests(struct isci_host *ihost,
+ struct isci_remote_device *idev);
+void isci_remote_device_gone(struct domain_device *domain_dev);
+int isci_remote_device_found(struct domain_device *domain_dev);
+bool isci_device_is_reset_pending(struct isci_host *ihost,
+ struct isci_remote_device *idev);
+void isci_device_clear_reset_pending(struct isci_host *ihost,
+ struct isci_remote_device *idev);
+/**
+ * sci_remote_device_stop() - This method will stop both transmission and
+ * reception of link activity for the supplied remote device. This method
+ * disables normal IO requests from flowing through to the remote device.
+ * @remote_device: This parameter specifies the device to be stopped.
+ * @timeout: This parameter specifies the number of milliseconds in which the
+ * stop operation should complete.
+ *
+ * An indication of whether the device was successfully stopped. SCI_SUCCESS
+ * This value is returned if the transmission and reception for the device was
+ * successfully stopped.
+ */
+enum sci_status sci_remote_device_stop(
+ struct isci_remote_device *idev,
+ u32 timeout);
+
+/**
+ * sci_remote_device_reset() - This method will reset the device making it
+ * ready for operation. This method must be called anytime the device is
+ * reset either through a SMP phy control or a port hard reset request.
+ * @remote_device: This parameter specifies the device to be reset.
+ *
+ * This method does not actually cause the device hardware to be reset. This
+ * method resets the software object so that it will be operational after a
+ * device hardware reset completes. An indication of whether the device reset
+ * was accepted. SCI_SUCCESS This value is returned if the device reset is
+ * started.
+ */
+enum sci_status sci_remote_device_reset(
+ struct isci_remote_device *idev);
+
+/**
+ * sci_remote_device_reset_complete() - This method informs the device object
+ * that the reset operation is complete and the device can resume operation
+ * again.
+ * @remote_device: This parameter specifies the device which is to be informed
+ * of the reset complete operation.
+ *
+ * An indication that the device is resuming operation. SCI_SUCCESS the device
+ * is resuming operation.
+ */
+enum sci_status sci_remote_device_reset_complete(
+ struct isci_remote_device *idev);
+
+/**
+ * enum sci_remote_device_states - This enumeration depicts all the states
+ * for the common remote device state machine.
+ *
+ *
+ */
+enum sci_remote_device_states {
+ /**
+ * Simply the initial state for the base remote device state machine.
+ */
+ SCI_DEV_INITIAL,
+
+ /**
+ * This state indicates that the remote device has successfully been
+ * stopped. In this state no new IO operations are permitted.
+ * This state is entered from the INITIAL state.
+ * This state is entered from the STOPPING state.
+ */
+ SCI_DEV_STOPPED,
+
+ /**
+ * This state indicates the the remote device is in the process of
+ * becoming ready (i.e. starting). In this state no new IO operations
+ * are permitted.
+ * This state is entered from the STOPPED state.
+ */
+ SCI_DEV_STARTING,
+
+ /**
+ * This state indicates the remote device is now ready. Thus, the user
+ * is able to perform IO operations on the remote device.
+ * This state is entered from the STARTING state.
+ */
+ SCI_DEV_READY,
+
+ /**
+ * This is the idle substate for the stp remote device. When there are no
+ * active IO for the device it is is in this state.
+ */
+ SCI_STP_DEV_IDLE,
+
+ /**
+ * This is the command state for for the STP remote device. This state is
+ * entered when the device is processing a non-NCQ command. The device object
+ * will fail any new start IO requests until this command is complete.
+ */
+ SCI_STP_DEV_CMD,
+
+ /**
+ * This is the NCQ state for the STP remote device. This state is entered
+ * when the device is processing an NCQ reuqest. It will remain in this state
+ * so long as there is one or more NCQ requests being processed.
+ */
+ SCI_STP_DEV_NCQ,
+
+ /**
+ * This is the NCQ error state for the STP remote device. This state is
+ * entered when an SDB error FIS is received by the device object while in the
+ * NCQ state. The device object will only accept a READ LOG command while in
+ * this state.
+ */
+ SCI_STP_DEV_NCQ_ERROR,
+
+ /**
+ * This is the READY substate indicates the device is waiting for the RESET task
+ * coming to be recovered from certain hardware specific error.
+ */
+ SCI_STP_DEV_AWAIT_RESET,
+
+ /**
+ * This is the ready operational substate for the remote device. This is the
+ * normal operational state for a remote device.
+ */
+ SCI_SMP_DEV_IDLE,
+
+ /**
+ * This is the suspended state for the remote device. This is the state that
+ * the device is placed in when a RNC suspend is received by the SCU hardware.
+ */
+ SCI_SMP_DEV_CMD,
+
+ /**
+ * This state indicates that the remote device is in the process of
+ * stopping. In this state no new IO operations are permitted, but
+ * existing IO operations are allowed to complete.
+ * This state is entered from the READY state.
+ * This state is entered from the FAILED state.
+ */
+ SCI_DEV_STOPPING,
+
+ /**
+ * This state indicates that the remote device has failed.
+ * In this state no new IO operations are permitted.
+ * This state is entered from the INITIALIZING state.
+ * This state is entered from the READY state.
+ */
+ SCI_DEV_FAILED,
+
+ /**
+ * This state indicates the device is being reset.
+ * In this state no new IO operations are permitted.
+ * This state is entered from the READY state.
+ */
+ SCI_DEV_RESETTING,
+
+ /**
+ * Simply the final state for the base remote device state machine.
+ */
+ SCI_DEV_FINAL,
+};
+
+static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc)
+{
+ struct isci_remote_device *idev;
+
+ idev = container_of(rnc, typeof(*idev), rnc);
+
+ return idev;
+}
+
+static inline bool dev_is_expander(struct domain_device *dev)
+{
+ return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV;
+}
+
+static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev)
+{
+ /* XXX delete this voodoo when converting to the top-level device
+ * reference count
+ */
+ if (WARN_ONCE(idev->started_request_count == 0,
+ "%s: tried to decrement started_request_count past 0!?",
+ __func__))
+ /* pass */;
+ else
+ idev->started_request_count--;
+}
+
+enum sci_status sci_remote_device_frame_handler(
+ struct isci_remote_device *idev,
+ u32 frame_index);
+
+enum sci_status sci_remote_device_event_handler(
+ struct isci_remote_device *idev,
+ u32 event_code);
+
+enum sci_status sci_remote_device_start_io(
+ struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq);
+
+enum sci_status sci_remote_device_start_task(
+ struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq);
+
+enum sci_status sci_remote_device_complete_io(
+ struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq);
+
+enum sci_status sci_remote_device_suspend(
+ struct isci_remote_device *idev,
+ u32 suspend_type);
+
+void sci_remote_device_post_request(
+ struct isci_remote_device *idev,
+ u32 request);
+
+#endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */
diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c
new file mode 100644
index 0000000..748e8339
--- /dev/null
+++ b/drivers/scsi/isci/remote_node_context.c
@@ -0,0 +1,627 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "host.h"
+#include "isci.h"
+#include "remote_device.h"
+#include "remote_node_context.h"
+#include "scu_event_codes.h"
+#include "scu_task_context.h"
+
+
+/**
+ *
+ * @sci_rnc: The RNC for which the is posted request is being made.
+ *
+ * This method will return true if the RNC is not in the initial state. In all
+ * other states the RNC is considered active and this will return true. The
+ * destroy request of the state machine drives the RNC back to the initial
+ * state. If the state machine changes then this routine will also have to be
+ * changed. bool true if the state machine is not in the initial state false if
+ * the state machine is in the initial state
+ */
+
+/**
+ *
+ * @sci_rnc: The state of the remote node context object to check.
+ *
+ * This method will return true if the remote node context is in a READY state
+ * otherwise it will return false bool true if the remote node context is in
+ * the ready state. false if the remote node context is not in the ready state.
+ */
+bool sci_remote_node_context_is_ready(
+ struct sci_remote_node_context *sci_rnc)
+{
+ u32 current_state = sci_rnc->sm.current_state_id;
+
+ if (current_state == SCI_RNC_READY) {
+ return true;
+ }
+
+ return false;
+}
+
+static union scu_remote_node_context *sci_rnc_by_id(struct isci_host *ihost, u16 id)
+{
+ if (id < ihost->remote_node_entries &&
+ ihost->device_table[id])
+ return &ihost->remote_node_context_table[id];
+
+ return NULL;
+}
+
+static void sci_remote_node_context_construct_buffer(struct sci_remote_node_context *sci_rnc)
+{
+ struct isci_remote_device *idev = rnc_to_dev(sci_rnc);
+ struct domain_device *dev = idev->domain_dev;
+ int rni = sci_rnc->remote_node_index;
+ union scu_remote_node_context *rnc;
+ struct isci_host *ihost;
+ __le64 sas_addr;
+
+ ihost = idev->owning_port->owning_controller;
+ rnc = sci_rnc_by_id(ihost, rni);
+
+ memset(rnc, 0, sizeof(union scu_remote_node_context)
+ * sci_remote_device_node_count(idev));
+
+ rnc->ssp.remote_node_index = rni;
+ rnc->ssp.remote_node_port_width = idev->device_port_width;
+ rnc->ssp.logical_port_index = idev->owning_port->physical_port_index;
+
+ /* sas address is __be64, context ram format is __le64 */
+ sas_addr = cpu_to_le64(SAS_ADDR(dev->sas_addr));
+ rnc->ssp.remote_sas_address_hi = upper_32_bits(sas_addr);
+ rnc->ssp.remote_sas_address_lo = lower_32_bits(sas_addr);
+
+ rnc->ssp.nexus_loss_timer_enable = true;
+ rnc->ssp.check_bit = false;
+ rnc->ssp.is_valid = false;
+ rnc->ssp.is_remote_node_context = true;
+ rnc->ssp.function_number = 0;
+
+ rnc->ssp.arbitration_wait_time = 0;
+
+ if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
+ rnc->ssp.connection_occupancy_timeout =
+ ihost->user_parameters.stp_max_occupancy_timeout;
+ rnc->ssp.connection_inactivity_timeout =
+ ihost->user_parameters.stp_inactivity_timeout;
+ } else {
+ rnc->ssp.connection_occupancy_timeout =
+ ihost->user_parameters.ssp_max_occupancy_timeout;
+ rnc->ssp.connection_inactivity_timeout =
+ ihost->user_parameters.ssp_inactivity_timeout;
+ }
+
+ rnc->ssp.initial_arbitration_wait_time = 0;
+
+ /* Open Address Frame Parameters */
+ rnc->ssp.oaf_connection_rate = idev->connection_rate;
+ rnc->ssp.oaf_features = 0;
+ rnc->ssp.oaf_source_zone_group = 0;
+ rnc->ssp.oaf_more_compatibility_features = 0;
+}
+
+/**
+ *
+ * @sci_rnc:
+ * @callback:
+ * @callback_parameter:
+ *
+ * This method will setup the remote node context object so it will transition
+ * to its ready state. If the remote node context is already setup to
+ * transition to its final state then this function does nothing. none
+ */
+static void sci_remote_node_context_setup_to_resume(
+ struct sci_remote_node_context *sci_rnc,
+ scics_sds_remote_node_context_callback callback,
+ void *callback_parameter)
+{
+ if (sci_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) {
+ sci_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY;
+ sci_rnc->user_callback = callback;
+ sci_rnc->user_cookie = callback_parameter;
+ }
+}
+
+static void sci_remote_node_context_setup_to_destory(
+ struct sci_remote_node_context *sci_rnc,
+ scics_sds_remote_node_context_callback callback,
+ void *callback_parameter)
+{
+ sci_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL;
+ sci_rnc->user_callback = callback;
+ sci_rnc->user_cookie = callback_parameter;
+}
+
+/**
+ *
+ *
+ * This method just calls the user callback function and then resets the
+ * callback.
+ */
+static void sci_remote_node_context_notify_user(
+ struct sci_remote_node_context *rnc)
+{
+ if (rnc->user_callback != NULL) {
+ (*rnc->user_callback)(rnc->user_cookie);
+
+ rnc->user_callback = NULL;
+ rnc->user_cookie = NULL;
+ }
+}
+
+static void sci_remote_node_context_continue_state_transitions(struct sci_remote_node_context *rnc)
+{
+ if (rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY)
+ sci_remote_node_context_resume(rnc, rnc->user_callback,
+ rnc->user_cookie);
+}
+
+static void sci_remote_node_context_validate_context_buffer(struct sci_remote_node_context *sci_rnc)
+{
+ union scu_remote_node_context *rnc_buffer;
+ struct isci_remote_device *idev = rnc_to_dev(sci_rnc);
+ struct domain_device *dev = idev->domain_dev;
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+
+ rnc_buffer = sci_rnc_by_id(ihost, sci_rnc->remote_node_index);
+
+ rnc_buffer->ssp.is_valid = true;
+
+ if (!idev->is_direct_attached &&
+ (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))) {
+ sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_96);
+ } else {
+ sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_32);
+
+ if (idev->is_direct_attached)
+ sci_port_setup_transports(idev->owning_port,
+ sci_rnc->remote_node_index);
+ }
+}
+
+static void sci_remote_node_context_invalidate_context_buffer(struct sci_remote_node_context *sci_rnc)
+{
+ union scu_remote_node_context *rnc_buffer;
+ struct isci_remote_device *idev = rnc_to_dev(sci_rnc);
+ struct isci_host *ihost = idev->owning_port->owning_controller;
+
+ rnc_buffer = sci_rnc_by_id(ihost, sci_rnc->remote_node_index);
+
+ rnc_buffer->ssp.is_valid = false;
+
+ sci_remote_device_post_request(rnc_to_dev(sci_rnc),
+ SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE);
+}
+
+static void sci_remote_node_context_initial_state_enter(struct sci_base_state_machine *sm)
+{
+ struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm);
+
+ /* Check to see if we have gotten back to the initial state because
+ * someone requested to destroy the remote node context object.
+ */
+ if (sm->previous_state_id == SCI_RNC_INVALIDATING) {
+ rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED;
+ sci_remote_node_context_notify_user(rnc);
+ }
+}
+
+static void sci_remote_node_context_posting_state_enter(struct sci_base_state_machine *sm)
+{
+ struct sci_remote_node_context *sci_rnc = container_of(sm, typeof(*sci_rnc), sm);
+
+ sci_remote_node_context_validate_context_buffer(sci_rnc);
+}
+
+static void sci_remote_node_context_invalidating_state_enter(struct sci_base_state_machine *sm)
+{
+ struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm);
+
+ sci_remote_node_context_invalidate_context_buffer(rnc);
+}
+
+static void sci_remote_node_context_resuming_state_enter(struct sci_base_state_machine *sm)
+{
+ struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm);
+ struct isci_remote_device *idev;
+ struct domain_device *dev;
+
+ idev = rnc_to_dev(rnc);
+ dev = idev->domain_dev;
+
+ /*
+ * For direct attached SATA devices we need to clear the TLCR
+ * NCQ to TCi tag mapping on the phy and in cases where we
+ * resume because of a target reset we also need to update
+ * the STPTLDARNI register with the RNi of the device
+ */
+ if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) &&
+ idev->is_direct_attached)
+ sci_port_setup_transports(idev->owning_port,
+ rnc->remote_node_index);
+
+ sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME);
+}
+
+static void sci_remote_node_context_ready_state_enter(struct sci_base_state_machine *sm)
+{
+ struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm);
+
+ rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED;
+
+ if (rnc->user_callback)
+ sci_remote_node_context_notify_user(rnc);
+}
+
+static void sci_remote_node_context_tx_suspended_state_enter(struct sci_base_state_machine *sm)
+{
+ struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm);
+
+ sci_remote_node_context_continue_state_transitions(rnc);
+}
+
+static void sci_remote_node_context_tx_rx_suspended_state_enter(struct sci_base_state_machine *sm)
+{
+ struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm);
+
+ sci_remote_node_context_continue_state_transitions(rnc);
+}
+
+static const struct sci_base_state sci_remote_node_context_state_table[] = {
+ [SCI_RNC_INITIAL] = {
+ .enter_state = sci_remote_node_context_initial_state_enter,
+ },
+ [SCI_RNC_POSTING] = {
+ .enter_state = sci_remote_node_context_posting_state_enter,
+ },
+ [SCI_RNC_INVALIDATING] = {
+ .enter_state = sci_remote_node_context_invalidating_state_enter,
+ },
+ [SCI_RNC_RESUMING] = {
+ .enter_state = sci_remote_node_context_resuming_state_enter,
+ },
+ [SCI_RNC_READY] = {
+ .enter_state = sci_remote_node_context_ready_state_enter,
+ },
+ [SCI_RNC_TX_SUSPENDED] = {
+ .enter_state = sci_remote_node_context_tx_suspended_state_enter,
+ },
+ [SCI_RNC_TX_RX_SUSPENDED] = {
+ .enter_state = sci_remote_node_context_tx_rx_suspended_state_enter,
+ },
+ [SCI_RNC_AWAIT_SUSPENSION] = { },
+};
+
+void sci_remote_node_context_construct(struct sci_remote_node_context *rnc,
+ u16 remote_node_index)
+{
+ memset(rnc, 0, sizeof(struct sci_remote_node_context));
+
+ rnc->remote_node_index = remote_node_index;
+ rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED;
+
+ sci_init_sm(&rnc->sm, sci_remote_node_context_state_table, SCI_RNC_INITIAL);
+}
+
+enum sci_status sci_remote_node_context_event_handler(struct sci_remote_node_context *sci_rnc,
+ u32 event_code)
+{
+ enum scis_sds_remote_node_context_states state;
+
+ state = sci_rnc->sm.current_state_id;
+ switch (state) {
+ case SCI_RNC_POSTING:
+ switch (scu_get_event_code(event_code)) {
+ case SCU_EVENT_POST_RNC_COMPLETE:
+ sci_change_state(&sci_rnc->sm, SCI_RNC_READY);
+ break;
+ default:
+ goto out;
+ }
+ break;
+ case SCI_RNC_INVALIDATING:
+ if (scu_get_event_code(event_code) == SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE) {
+ if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL)
+ state = SCI_RNC_INITIAL;
+ else
+ state = SCI_RNC_POSTING;
+ sci_change_state(&sci_rnc->sm, state);
+ } else {
+ switch (scu_get_event_type(event_code)) {
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX:
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
+ /* We really dont care if the hardware is going to suspend
+ * the device since it's being invalidated anyway */
+ dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ "%s: SCIC Remote Node Context 0x%p was "
+ "suspeneded by hardware while being "
+ "invalidated.\n", __func__, sci_rnc);
+ break;
+ default:
+ goto out;
+ }
+ }
+ break;
+ case SCI_RNC_RESUMING:
+ if (scu_get_event_code(event_code) == SCU_EVENT_POST_RCN_RELEASE) {
+ sci_change_state(&sci_rnc->sm, SCI_RNC_READY);
+ } else {
+ switch (scu_get_event_type(event_code)) {
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX:
+ case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
+ /* We really dont care if the hardware is going to suspend
+ * the device since it's being resumed anyway */
+ dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ "%s: SCIC Remote Node Context 0x%p was "
+ "suspeneded by hardware while being resumed.\n",
+ __func__, sci_rnc);
+ break;
+ default:
+ goto out;
+ }
+ }
+ break;
+ case SCI_RNC_READY:
+ switch (scu_get_event_type(event_code)) {
+ case SCU_EVENT_TL_RNC_SUSPEND_TX:
+ sci_change_state(&sci_rnc->sm, SCI_RNC_TX_SUSPENDED);
+ sci_rnc->suspension_code = scu_get_event_specifier(event_code);
+ break;
+ case SCU_EVENT_TL_RNC_SUSPEND_TX_RX:
+ sci_change_state(&sci_rnc->sm, SCI_RNC_TX_RX_SUSPENDED);
+ sci_rnc->suspension_code = scu_get_event_specifier(event_code);
+ break;
+ default:
+ goto out;
+ }
+ break;
+ case SCI_RNC_AWAIT_SUSPENSION:
+ switch (scu_get_event_type(event_code)) {
+ case SCU_EVENT_TL_RNC_SUSPEND_TX:
+ sci_change_state(&sci_rnc->sm, SCI_RNC_TX_SUSPENDED);
+ sci_rnc->suspension_code = scu_get_event_specifier(event_code);
+ break;
+ case SCU_EVENT_TL_RNC_SUSPEND_TX_RX:
+ sci_change_state(&sci_rnc->sm, SCI_RNC_TX_RX_SUSPENDED);
+ sci_rnc->suspension_code = scu_get_event_specifier(event_code);
+ break;
+ default:
+ goto out;
+ }
+ break;
+ default:
+ dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ "%s: invalid state %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+ return SCI_SUCCESS;
+
+ out:
+ dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ "%s: code: %#x state: %d\n", __func__, event_code, state);
+ return SCI_FAILURE;
+
+}
+
+enum sci_status sci_remote_node_context_destruct(struct sci_remote_node_context *sci_rnc,
+ scics_sds_remote_node_context_callback cb_fn,
+ void *cb_p)
+{
+ enum scis_sds_remote_node_context_states state;
+
+ state = sci_rnc->sm.current_state_id;
+ switch (state) {
+ case SCI_RNC_INVALIDATING:
+ sci_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p);
+ return SCI_SUCCESS;
+ case SCI_RNC_POSTING:
+ case SCI_RNC_RESUMING:
+ case SCI_RNC_READY:
+ case SCI_RNC_TX_SUSPENDED:
+ case SCI_RNC_TX_RX_SUSPENDED:
+ case SCI_RNC_AWAIT_SUSPENSION:
+ sci_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p);
+ sci_change_state(&sci_rnc->sm, SCI_RNC_INVALIDATING);
+ return SCI_SUCCESS;
+ case SCI_RNC_INITIAL:
+ dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ "%s: invalid state %d\n", __func__, state);
+ /* We have decided that the destruct request on the remote node context
+ * can not fail since it is either in the initial/destroyed state or is
+ * can be destroyed.
+ */
+ return SCI_SUCCESS;
+ default:
+ dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ "%s: invalid state %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+enum sci_status sci_remote_node_context_suspend(struct sci_remote_node_context *sci_rnc,
+ u32 suspend_type,
+ scics_sds_remote_node_context_callback cb_fn,
+ void *cb_p)
+{
+ enum scis_sds_remote_node_context_states state;
+
+ state = sci_rnc->sm.current_state_id;
+ if (state != SCI_RNC_READY) {
+ dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ "%s: invalid state %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ sci_rnc->user_callback = cb_fn;
+ sci_rnc->user_cookie = cb_p;
+ sci_rnc->suspension_code = suspend_type;
+
+ if (suspend_type == SCI_SOFTWARE_SUSPENSION) {
+ sci_remote_device_post_request(rnc_to_dev(sci_rnc),
+ SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX);
+ }
+
+ sci_change_state(&sci_rnc->sm, SCI_RNC_AWAIT_SUSPENSION);
+ return SCI_SUCCESS;
+}
+
+enum sci_status sci_remote_node_context_resume(struct sci_remote_node_context *sci_rnc,
+ scics_sds_remote_node_context_callback cb_fn,
+ void *cb_p)
+{
+ enum scis_sds_remote_node_context_states state;
+
+ state = sci_rnc->sm.current_state_id;
+ switch (state) {
+ case SCI_RNC_INITIAL:
+ if (sci_rnc->remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX)
+ return SCI_FAILURE_INVALID_STATE;
+
+ sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p);
+ sci_remote_node_context_construct_buffer(sci_rnc);
+ sci_change_state(&sci_rnc->sm, SCI_RNC_POSTING);
+ return SCI_SUCCESS;
+ case SCI_RNC_POSTING:
+ case SCI_RNC_INVALIDATING:
+ case SCI_RNC_RESUMING:
+ if (sci_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY)
+ return SCI_FAILURE_INVALID_STATE;
+
+ sci_rnc->user_callback = cb_fn;
+ sci_rnc->user_cookie = cb_p;
+ return SCI_SUCCESS;
+ case SCI_RNC_TX_SUSPENDED: {
+ struct isci_remote_device *idev = rnc_to_dev(sci_rnc);
+ struct domain_device *dev = idev->domain_dev;
+
+ sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p);
+
+ /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */
+ if (dev->dev_type == SAS_END_DEV || dev_is_expander(dev))
+ sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING);
+ else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
+ if (idev->is_direct_attached) {
+ /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */
+ sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING);
+ } else {
+ sci_change_state(&sci_rnc->sm, SCI_RNC_INVALIDATING);
+ }
+ } else
+ return SCI_FAILURE;
+ return SCI_SUCCESS;
+ }
+ case SCI_RNC_TX_RX_SUSPENDED:
+ sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p);
+ sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING);
+ return SCI_FAILURE_INVALID_STATE;
+ case SCI_RNC_AWAIT_SUSPENSION:
+ sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ "%s: invalid state %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+enum sci_status sci_remote_node_context_start_io(struct sci_remote_node_context *sci_rnc,
+ struct isci_request *ireq)
+{
+ enum scis_sds_remote_node_context_states state;
+
+ state = sci_rnc->sm.current_state_id;
+
+ switch (state) {
+ case SCI_RNC_READY:
+ return SCI_SUCCESS;
+ case SCI_RNC_TX_SUSPENDED:
+ case SCI_RNC_TX_RX_SUSPENDED:
+ case SCI_RNC_AWAIT_SUSPENSION:
+ dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ "%s: invalid state %d\n", __func__, state);
+ return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED;
+ default:
+ break;
+ }
+ dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ "%s: requested to start IO while still resuming, %d\n",
+ __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+}
+
+enum sci_status sci_remote_node_context_start_task(struct sci_remote_node_context *sci_rnc,
+ struct isci_request *ireq)
+{
+ enum scis_sds_remote_node_context_states state;
+
+ state = sci_rnc->sm.current_state_id;
+ switch (state) {
+ case SCI_RNC_RESUMING:
+ case SCI_RNC_READY:
+ case SCI_RNC_AWAIT_SUSPENSION:
+ return SCI_SUCCESS;
+ case SCI_RNC_TX_SUSPENDED:
+ case SCI_RNC_TX_RX_SUSPENDED:
+ sci_remote_node_context_resume(sci_rnc, NULL, NULL);
+ return SCI_SUCCESS;
+ default:
+ dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ "%s: invalid state %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h
new file mode 100644
index 0000000..41580ad
--- /dev/null
+++ b/drivers/scsi/isci/remote_node_context.h
@@ -0,0 +1,224 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SCIC_SDS_REMOTE_NODE_CONTEXT_H_
+#define _SCIC_SDS_REMOTE_NODE_CONTEXT_H_
+
+/**
+ * This file contains the structures, constants, and prototypes associated with
+ * the remote node context in the silicon. It exists to model and manage
+ * the remote node context in the silicon.
+ *
+ *
+ */
+
+#include "isci.h"
+
+/**
+ *
+ *
+ * This constant represents an invalid remote device id, it is used to program
+ * the STPDARNI register so the driver knows when it has received a SIGNATURE
+ * FIS from the SCU.
+ */
+#define SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX 0x0FFF
+
+#define SCU_HARDWARE_SUSPENSION (0)
+#define SCI_SOFTWARE_SUSPENSION (1)
+
+struct isci_request;
+struct isci_remote_device;
+struct sci_remote_node_context;
+
+typedef void (*scics_sds_remote_node_context_callback)(void *);
+
+/**
+ * This is the enumeration of the remote node context states.
+ */
+enum scis_sds_remote_node_context_states {
+ /**
+ * This state is the initial state for a remote node context. On a resume
+ * request the remote node context will transition to the posting state.
+ */
+ SCI_RNC_INITIAL,
+
+ /**
+ * This is a transition state that posts the RNi to the hardware. Once the RNC
+ * is posted the remote node context will be made ready.
+ */
+ SCI_RNC_POSTING,
+
+ /**
+ * This is a transition state that will post an RNC invalidate to the
+ * hardware. Once the invalidate is complete the remote node context will
+ * transition to the posting state.
+ */
+ SCI_RNC_INVALIDATING,
+
+ /**
+ * This is a transition state that will post an RNC resume to the hardare.
+ * Once the event notification of resume complete is received the remote node
+ * context will transition to the ready state.
+ */
+ SCI_RNC_RESUMING,
+
+ /**
+ * This is the state that the remote node context must be in to accept io
+ * request operations.
+ */
+ SCI_RNC_READY,
+
+ /**
+ * This is the state that the remote node context transitions to when it gets
+ * a TX suspend notification from the hardware.
+ */
+ SCI_RNC_TX_SUSPENDED,
+
+ /**
+ * This is the state that the remote node context transitions to when it gets
+ * a TX RX suspend notification from the hardware.
+ */
+ SCI_RNC_TX_RX_SUSPENDED,
+
+ /**
+ * This state is a wait state for the remote node context that waits for a
+ * suspend notification from the hardware. This state is entered when either
+ * there is a request to supend the remote node context or when there is a TC
+ * completion where the remote node will be suspended by the hardware.
+ */
+ SCI_RNC_AWAIT_SUSPENSION
+};
+
+/**
+ *
+ *
+ * This enumeration is used to define the end destination state for the remote
+ * node context.
+ */
+enum sci_remote_node_context_destination_state {
+ SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED,
+ SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY,
+ SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL
+};
+
+/**
+ * struct sci_remote_node_context - This structure contains the data
+ * associated with the remote node context object. The remote node context
+ * (RNC) object models the the remote device information necessary to manage
+ * the silicon RNC.
+ */
+struct sci_remote_node_context {
+ /**
+ * This field indicates the remote node index (RNI) associated with
+ * this RNC.
+ */
+ u16 remote_node_index;
+
+ /**
+ * This field is the recored suspension code or the reason for the remote node
+ * context suspension.
+ */
+ u32 suspension_code;
+
+ /**
+ * This field is true if the remote node context is resuming from its current
+ * state. This can cause an automatic resume on receiving a suspension
+ * notification.
+ */
+ enum sci_remote_node_context_destination_state destination_state;
+
+ /**
+ * This field contains the callback function that the user requested to be
+ * called when the requested state transition is complete.
+ */
+ scics_sds_remote_node_context_callback user_callback;
+
+ /**
+ * This field contains the parameter that is called when the user requested
+ * state transition is completed.
+ */
+ void *user_cookie;
+
+ /**
+ * This field contains the data for the object's state machine.
+ */
+ struct sci_base_state_machine sm;
+};
+
+void sci_remote_node_context_construct(struct sci_remote_node_context *rnc,
+ u16 remote_node_index);
+
+
+bool sci_remote_node_context_is_ready(
+ struct sci_remote_node_context *sci_rnc);
+
+enum sci_status sci_remote_node_context_event_handler(struct sci_remote_node_context *sci_rnc,
+ u32 event_code);
+enum sci_status sci_remote_node_context_destruct(struct sci_remote_node_context *sci_rnc,
+ scics_sds_remote_node_context_callback callback,
+ void *callback_parameter);
+enum sci_status sci_remote_node_context_suspend(struct sci_remote_node_context *sci_rnc,
+ u32 suspend_type,
+ scics_sds_remote_node_context_callback cb_fn,
+ void *cb_p);
+enum sci_status sci_remote_node_context_resume(struct sci_remote_node_context *sci_rnc,
+ scics_sds_remote_node_context_callback cb_fn,
+ void *cb_p);
+enum sci_status sci_remote_node_context_start_task(struct sci_remote_node_context *sci_rnc,
+ struct isci_request *ireq);
+enum sci_status sci_remote_node_context_start_io(struct sci_remote_node_context *sci_rnc,
+ struct isci_request *ireq);
+
+#endif /* _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ */
diff --git a/drivers/scsi/isci/remote_node_table.c b/drivers/scsi/isci/remote_node_table.c
new file mode 100644
index 0000000..301b314
--- /dev/null
+++ b/drivers/scsi/isci/remote_node_table.c
@@ -0,0 +1,598 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * This file contains the implementation of the SCIC_SDS_REMOTE_NODE_TABLE
+ * public, protected, and private methods.
+ *
+ *
+ */
+#include "remote_node_table.h"
+#include "remote_node_context.h"
+
+/**
+ *
+ * @remote_node_table: This is the remote node index table from which the
+ * selection will be made.
+ * @group_table_index: This is the index to the group table from which to
+ * search for an available selection.
+ *
+ * This routine will find the bit position in absolute bit terms of the next 32
+ * + bit position. If there are available bits in the first u32 then it is
+ * just bit position. u32 This is the absolute bit position for an available
+ * group.
+ */
+static u32 sci_remote_node_table_get_group_index(
+ struct sci_remote_node_table *remote_node_table,
+ u32 group_table_index)
+{
+ u32 dword_index;
+ u32 *group_table;
+ u32 bit_index;
+
+ group_table = remote_node_table->remote_node_groups[group_table_index];
+
+ for (dword_index = 0; dword_index < remote_node_table->group_array_size; dword_index++) {
+ if (group_table[dword_index] != 0) {
+ for (bit_index = 0; bit_index < 32; bit_index++) {
+ if ((group_table[dword_index] & (1 << bit_index)) != 0) {
+ return (dword_index * 32) + bit_index;
+ }
+ }
+ }
+ }
+
+ return SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX;
+}
+
+/**
+ *
+ * @out]: remote_node_table This the remote node table in which to clear the
+ * selector.
+ * @set_index: This is the remote node selector in which the change will be
+ * made.
+ * @group_index: This is the bit index in the table to be modified.
+ *
+ * This method will clear the group index entry in the specified group index
+ * table. none
+ */
+static void sci_remote_node_table_clear_group_index(
+ struct sci_remote_node_table *remote_node_table,
+ u32 group_table_index,
+ u32 group_index)
+{
+ u32 dword_index;
+ u32 bit_index;
+ u32 *group_table;
+
+ BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT);
+ BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32));
+
+ dword_index = group_index / 32;
+ bit_index = group_index % 32;
+ group_table = remote_node_table->remote_node_groups[group_table_index];
+
+ group_table[dword_index] = group_table[dword_index] & ~(1 << bit_index);
+}
+
+/**
+ *
+ * @out]: remote_node_table This the remote node table in which to set the
+ * selector.
+ * @group_table_index: This is the remote node selector in which the change
+ * will be made.
+ * @group_index: This is the bit position in the table to be modified.
+ *
+ * This method will set the group index bit entry in the specified gropu index
+ * table. none
+ */
+static void sci_remote_node_table_set_group_index(
+ struct sci_remote_node_table *remote_node_table,
+ u32 group_table_index,
+ u32 group_index)
+{
+ u32 dword_index;
+ u32 bit_index;
+ u32 *group_table;
+
+ BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT);
+ BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32));
+
+ dword_index = group_index / 32;
+ bit_index = group_index % 32;
+ group_table = remote_node_table->remote_node_groups[group_table_index];
+
+ group_table[dword_index] = group_table[dword_index] | (1 << bit_index);
+}
+
+/**
+ *
+ * @out]: remote_node_table This is the remote node table in which to modify
+ * the remote node availability.
+ * @remote_node_index: This is the remote node index that is being returned to
+ * the table.
+ *
+ * This method will set the remote to available in the remote node allocation
+ * table. none
+ */
+static void sci_remote_node_table_set_node_index(
+ struct sci_remote_node_table *remote_node_table,
+ u32 remote_node_index)
+{
+ u32 dword_location;
+ u32 dword_remainder;
+ u32 slot_normalized;
+ u32 slot_position;
+
+ BUG_ON(
+ (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD)
+ <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT)
+ );
+
+ dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD;
+ dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD;
+ slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32);
+ slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT;
+
+ remote_node_table->available_remote_nodes[dword_location] |=
+ 1 << (slot_normalized + slot_position);
+}
+
+/**
+ *
+ * @out]: remote_node_table This is the remote node table from which to clear
+ * the available remote node bit.
+ * @remote_node_index: This is the remote node index which is to be cleared
+ * from the table.
+ *
+ * This method clears the remote node index from the table of available remote
+ * nodes. none
+ */
+static void sci_remote_node_table_clear_node_index(
+ struct sci_remote_node_table *remote_node_table,
+ u32 remote_node_index)
+{
+ u32 dword_location;
+ u32 dword_remainder;
+ u32 slot_position;
+ u32 slot_normalized;
+
+ BUG_ON(
+ (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD)
+ <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT)
+ );
+
+ dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD;
+ dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD;
+ slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32);
+ slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT;
+
+ remote_node_table->available_remote_nodes[dword_location] &=
+ ~(1 << (slot_normalized + slot_position));
+}
+
+/**
+ *
+ * @out]: remote_node_table The remote node table from which the slot will be
+ * cleared.
+ * @group_index: The index for the slot that is to be cleared.
+ *
+ * This method clears the entire table slot at the specified slot index. none
+ */
+static void sci_remote_node_table_clear_group(
+ struct sci_remote_node_table *remote_node_table,
+ u32 group_index)
+{
+ u32 dword_location;
+ u32 dword_remainder;
+ u32 dword_value;
+
+ BUG_ON(
+ (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD)
+ <= (group_index / SCU_STP_REMOTE_NODE_COUNT)
+ );
+
+ dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD;
+ dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD;
+
+ dword_value = remote_node_table->available_remote_nodes[dword_location];
+ dword_value &= ~(SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4));
+ remote_node_table->available_remote_nodes[dword_location] = dword_value;
+}
+
+/**
+ *
+ * @remote_node_table:
+ *
+ * THis method sets an entire remote node group in the remote node table.
+ */
+static void sci_remote_node_table_set_group(
+ struct sci_remote_node_table *remote_node_table,
+ u32 group_index)
+{
+ u32 dword_location;
+ u32 dword_remainder;
+ u32 dword_value;
+
+ BUG_ON(
+ (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD)
+ <= (group_index / SCU_STP_REMOTE_NODE_COUNT)
+ );
+
+ dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD;
+ dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD;
+
+ dword_value = remote_node_table->available_remote_nodes[dword_location];
+ dword_value |= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4));
+ remote_node_table->available_remote_nodes[dword_location] = dword_value;
+}
+
+/**
+ *
+ * @remote_node_table: This is the remote node table that for which the group
+ * value is to be returned.
+ * @group_index: This is the group index to use to find the group value.
+ *
+ * This method will return the group value for the specified group index. The
+ * bit values at the specified remote node group index.
+ */
+static u8 sci_remote_node_table_get_group_value(
+ struct sci_remote_node_table *remote_node_table,
+ u32 group_index)
+{
+ u32 dword_location;
+ u32 dword_remainder;
+ u32 dword_value;
+
+ dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD;
+ dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD;
+
+ dword_value = remote_node_table->available_remote_nodes[dword_location];
+ dword_value &= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4));
+ dword_value = dword_value >> (dword_remainder * 4);
+
+ return (u8)dword_value;
+}
+
+/**
+ *
+ * @out]: remote_node_table The remote that which is to be initialized.
+ * @remote_node_entries: The number of entries to put in the table.
+ *
+ * This method will initialize the remote node table for use. none
+ */
+void sci_remote_node_table_initialize(
+ struct sci_remote_node_table *remote_node_table,
+ u32 remote_node_entries)
+{
+ u32 index;
+
+ /*
+ * Initialize the raw data we could improve the speed by only initializing
+ * those entries that we are actually going to be used */
+ memset(
+ remote_node_table->available_remote_nodes,
+ 0x00,
+ sizeof(remote_node_table->available_remote_nodes)
+ );
+
+ memset(
+ remote_node_table->remote_node_groups,
+ 0x00,
+ sizeof(remote_node_table->remote_node_groups)
+ );
+
+ /* Initialize the available remote node sets */
+ remote_node_table->available_nodes_array_size = (u16)
+ (remote_node_entries / SCIC_SDS_REMOTE_NODES_PER_DWORD)
+ + ((remote_node_entries % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0);
+
+
+ /* Initialize each full DWORD to a FULL SET of remote nodes */
+ for (index = 0; index < remote_node_entries; index++) {
+ sci_remote_node_table_set_node_index(remote_node_table, index);
+ }
+
+ remote_node_table->group_array_size = (u16)
+ (remote_node_entries / (SCU_STP_REMOTE_NODE_COUNT * 32))
+ + ((remote_node_entries % (SCU_STP_REMOTE_NODE_COUNT * 32)) != 0);
+
+ for (index = 0; index < (remote_node_entries / SCU_STP_REMOTE_NODE_COUNT); index++) {
+ /*
+ * These are all guaranteed to be full slot values so fill them in the
+ * available sets of 3 remote nodes */
+ sci_remote_node_table_set_group_index(remote_node_table, 2, index);
+ }
+
+ /* Now fill in any remainders that we may find */
+ if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 2) {
+ sci_remote_node_table_set_group_index(remote_node_table, 1, index);
+ } else if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 1) {
+ sci_remote_node_table_set_group_index(remote_node_table, 0, index);
+ }
+}
+
+/**
+ *
+ * @out]: remote_node_table The remote node table from which to allocate a
+ * remote node.
+ * @table_index: The group index that is to be used for the search.
+ *
+ * This method will allocate a single RNi from the remote node table. The
+ * table index will determine from which remote node group table to search.
+ * This search may fail and another group node table can be specified. The
+ * function is designed to allow a serach of the available single remote node
+ * group up to the triple remote node group. If an entry is found in the
+ * specified table the remote node is removed and the remote node groups are
+ * updated. The RNi value or an invalid remote node context if an RNi can not
+ * be found.
+ */
+static u16 sci_remote_node_table_allocate_single_remote_node(
+ struct sci_remote_node_table *remote_node_table,
+ u32 group_table_index)
+{
+ u8 index;
+ u8 group_value;
+ u32 group_index;
+ u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX;
+
+ group_index = sci_remote_node_table_get_group_index(
+ remote_node_table, group_table_index);
+
+ /* We could not find an available slot in the table selector 0 */
+ if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) {
+ group_value = sci_remote_node_table_get_group_value(
+ remote_node_table, group_index);
+
+ for (index = 0; index < SCU_STP_REMOTE_NODE_COUNT; index++) {
+ if (((1 << index) & group_value) != 0) {
+ /* We have selected a bit now clear it */
+ remote_node_index = (u16)(group_index * SCU_STP_REMOTE_NODE_COUNT
+ + index);
+
+ sci_remote_node_table_clear_group_index(
+ remote_node_table, group_table_index, group_index
+ );
+
+ sci_remote_node_table_clear_node_index(
+ remote_node_table, remote_node_index
+ );
+
+ if (group_table_index > 0) {
+ sci_remote_node_table_set_group_index(
+ remote_node_table, group_table_index - 1, group_index
+ );
+ }
+
+ break;
+ }
+ }
+ }
+
+ return remote_node_index;
+}
+
+/**
+ *
+ * @remote_node_table: This is the remote node table from which to allocate the
+ * remote node entries.
+ * @group_table_index: THis is the group table index which must equal two (2)
+ * for this operation.
+ *
+ * This method will allocate three consecutive remote node context entries. If
+ * there are no remaining triple entries the function will return a failure.
+ * The remote node index that represents three consecutive remote node entries
+ * or an invalid remote node context if none can be found.
+ */
+static u16 sci_remote_node_table_allocate_triple_remote_node(
+ struct sci_remote_node_table *remote_node_table,
+ u32 group_table_index)
+{
+ u32 group_index;
+ u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX;
+
+ group_index = sci_remote_node_table_get_group_index(
+ remote_node_table, group_table_index);
+
+ if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) {
+ remote_node_index = (u16)group_index * SCU_STP_REMOTE_NODE_COUNT;
+
+ sci_remote_node_table_clear_group_index(
+ remote_node_table, group_table_index, group_index
+ );
+
+ sci_remote_node_table_clear_group(
+ remote_node_table, group_index
+ );
+ }
+
+ return remote_node_index;
+}
+
+/**
+ *
+ * @remote_node_table: This is the remote node table from which the remote node
+ * allocation is to take place.
+ * @remote_node_count: This is ther remote node count which is one of
+ * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3).
+ *
+ * This method will allocate a remote node that mataches the remote node count
+ * specified by the caller. Valid values for remote node count is
+ * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). u16 This is
+ * the remote node index that is returned or an invalid remote node context.
+ */
+u16 sci_remote_node_table_allocate_remote_node(
+ struct sci_remote_node_table *remote_node_table,
+ u32 remote_node_count)
+{
+ u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX;
+
+ if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) {
+ remote_node_index =
+ sci_remote_node_table_allocate_single_remote_node(
+ remote_node_table, 0);
+
+ if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) {
+ remote_node_index =
+ sci_remote_node_table_allocate_single_remote_node(
+ remote_node_table, 1);
+ }
+
+ if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) {
+ remote_node_index =
+ sci_remote_node_table_allocate_single_remote_node(
+ remote_node_table, 2);
+ }
+ } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) {
+ remote_node_index =
+ sci_remote_node_table_allocate_triple_remote_node(
+ remote_node_table, 2);
+ }
+
+ return remote_node_index;
+}
+
+/**
+ *
+ * @remote_node_table:
+ *
+ * This method will free a single remote node index back to the remote node
+ * table. This routine will update the remote node groups
+ */
+static void sci_remote_node_table_release_single_remote_node(
+ struct sci_remote_node_table *remote_node_table,
+ u16 remote_node_index)
+{
+ u32 group_index;
+ u8 group_value;
+
+ group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT;
+
+ group_value = sci_remote_node_table_get_group_value(remote_node_table, group_index);
+
+ /*
+ * Assert that we are not trying to add an entry to a slot that is already
+ * full. */
+ BUG_ON(group_value == SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE);
+
+ if (group_value == 0x00) {
+ /*
+ * There are no entries in this slot so it must be added to the single
+ * slot table. */
+ sci_remote_node_table_set_group_index(remote_node_table, 0, group_index);
+ } else if ((group_value & (group_value - 1)) == 0) {
+ /*
+ * There is only one entry in this slot so it must be moved from the
+ * single slot table to the dual slot table */
+ sci_remote_node_table_clear_group_index(remote_node_table, 0, group_index);
+ sci_remote_node_table_set_group_index(remote_node_table, 1, group_index);
+ } else {
+ /*
+ * There are two entries in the slot so it must be moved from the dual
+ * slot table to the tripple slot table. */
+ sci_remote_node_table_clear_group_index(remote_node_table, 1, group_index);
+ sci_remote_node_table_set_group_index(remote_node_table, 2, group_index);
+ }
+
+ sci_remote_node_table_set_node_index(remote_node_table, remote_node_index);
+}
+
+/**
+ *
+ * @remote_node_table: This is the remote node table to which the remote node
+ * index is to be freed.
+ *
+ * This method will release a group of three consecutive remote nodes back to
+ * the free remote nodes.
+ */
+static void sci_remote_node_table_release_triple_remote_node(
+ struct sci_remote_node_table *remote_node_table,
+ u16 remote_node_index)
+{
+ u32 group_index;
+
+ group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT;
+
+ sci_remote_node_table_set_group_index(
+ remote_node_table, 2, group_index
+ );
+
+ sci_remote_node_table_set_group(remote_node_table, group_index);
+}
+
+/**
+ *
+ * @remote_node_table: The remote node table to which the remote node index is
+ * to be freed.
+ * @remote_node_count: This is the count of consecutive remote nodes that are
+ * to be freed.
+ *
+ * This method will release the remote node index back into the remote node
+ * table free pool.
+ */
+void sci_remote_node_table_release_remote_node_index(
+ struct sci_remote_node_table *remote_node_table,
+ u32 remote_node_count,
+ u16 remote_node_index)
+{
+ if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) {
+ sci_remote_node_table_release_single_remote_node(
+ remote_node_table, remote_node_index);
+ } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) {
+ sci_remote_node_table_release_triple_remote_node(
+ remote_node_table, remote_node_index);
+ }
+}
+
diff --git a/drivers/scsi/isci/remote_node_table.h b/drivers/scsi/isci/remote_node_table.h
new file mode 100644
index 0000000..721ab98
--- /dev/null
+++ b/drivers/scsi/isci/remote_node_table.h
@@ -0,0 +1,188 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SCIC_SDS_REMOTE_NODE_TABLE_H_
+#define _SCIC_SDS_REMOTE_NODE_TABLE_H_
+
+#include "isci.h"
+
+/**
+ *
+ *
+ * Remote node sets are sets of remote node index in the remtoe node table The
+ * SCU hardware requires that STP remote node entries take three consecutive
+ * remote node index so the table is arranged in sets of three. The bits are
+ * used as 0111 0111 to make a byte and the bits define the set of three remote
+ * nodes to use as a sequence.
+ */
+#define SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE 2
+
+/**
+ *
+ *
+ * Since the remote node table is organized as DWORDS take the remote node sets
+ * in bytes and represent them in DWORDs. The lowest ordered bits are the ones
+ * used in case full DWORD is not being used. i.e. 0000 0000 0000 0000 0111
+ * 0111 0111 0111 // if only a single WORD is in use in the DWORD.
+ */
+#define SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD \
+ (sizeof(u32) * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE)
+/**
+ *
+ *
+ * This is a count of the numeber of remote nodes that can be represented in a
+ * byte
+ */
+#define SCIC_SDS_REMOTE_NODES_PER_BYTE \
+ (SCU_STP_REMOTE_NODE_COUNT * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE)
+
+/**
+ *
+ *
+ * This is a count of the number of remote nodes that can be represented in a
+ * DWROD
+ */
+#define SCIC_SDS_REMOTE_NODES_PER_DWORD \
+ (sizeof(u32) * SCIC_SDS_REMOTE_NODES_PER_BYTE)
+
+/**
+ *
+ *
+ * This is the number of bits in a remote node group
+ */
+#define SCIC_SDS_REMOTE_NODES_BITS_PER_GROUP 4
+
+#define SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX (0xFFFFFFFF)
+#define SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE (0x07)
+#define SCIC_SDS_REMOTE_NODE_TABLE_EMPTY_SLOT_VALUE (0x00)
+
+/**
+ *
+ *
+ * Expander attached sata remote node count
+ */
+#define SCU_STP_REMOTE_NODE_COUNT 3
+
+/**
+ *
+ *
+ * Expander or direct attached ssp remote node count
+ */
+#define SCU_SSP_REMOTE_NODE_COUNT 1
+
+/**
+ *
+ *
+ * Direct attached STP remote node count
+ */
+#define SCU_SATA_REMOTE_NODE_COUNT 1
+
+/**
+ * struct sci_remote_node_table -
+ *
+ *
+ */
+struct sci_remote_node_table {
+ /**
+ * This field contains the array size in dwords
+ */
+ u16 available_nodes_array_size;
+
+ /**
+ * This field contains the array size of the
+ */
+ u16 group_array_size;
+
+ /**
+ * This field is the array of available remote node entries in bits.
+ * Because of the way STP remote node data is allocated on the SCU hardware
+ * the remote nodes must occupy three consecutive remote node context
+ * entries. For ease of allocation and de-allocation we have broken the
+ * sets of three into a single nibble. When the STP RNi is allocated all
+ * of the bits in the nibble are cleared. This math results in a table size
+ * of MAX_REMOTE_NODES / CONSECUTIVE RNi ENTRIES for STP / 2 entries per byte.
+ */
+ u32 available_remote_nodes[
+ (SCI_MAX_REMOTE_DEVICES / SCIC_SDS_REMOTE_NODES_PER_DWORD)
+ + ((SCI_MAX_REMOTE_DEVICES % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0)];
+
+ /**
+ * This field is the nibble selector for the above table. There are three
+ * possible selectors each for fast lookup when trying to find one, two or
+ * three remote node entries.
+ */
+ u32 remote_node_groups[
+ SCU_STP_REMOTE_NODE_COUNT][
+ (SCI_MAX_REMOTE_DEVICES / (32 * SCU_STP_REMOTE_NODE_COUNT))
+ + ((SCI_MAX_REMOTE_DEVICES % (32 * SCU_STP_REMOTE_NODE_COUNT)) != 0)];
+
+};
+
+/* --------------------------------------------------------------------------- */
+
+void sci_remote_node_table_initialize(
+ struct sci_remote_node_table *remote_node_table,
+ u32 remote_node_entries);
+
+u16 sci_remote_node_table_allocate_remote_node(
+ struct sci_remote_node_table *remote_node_table,
+ u32 remote_node_count);
+
+void sci_remote_node_table_release_remote_node_index(
+ struct sci_remote_node_table *remote_node_table,
+ u32 remote_node_count,
+ u16 remote_node_index);
+
+#endif /* _SCIC_SDS_REMOTE_NODE_TABLE_H_ */
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
new file mode 100644
index 0000000..a46e07a
--- /dev/null
+++ b/drivers/scsi/isci/request.c
@@ -0,0 +1,3391 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "isci.h"
+#include "task.h"
+#include "request.h"
+#include "scu_completion_codes.h"
+#include "scu_event_codes.h"
+#include "sas.h"
+
+static struct scu_sgl_element_pair *to_sgl_element_pair(struct isci_request *ireq,
+ int idx)
+{
+ if (idx == 0)
+ return &ireq->tc->sgl_pair_ab;
+ else if (idx == 1)
+ return &ireq->tc->sgl_pair_cd;
+ else if (idx < 0)
+ return NULL;
+ else
+ return &ireq->sg_table[idx - 2];
+}
+
+static dma_addr_t to_sgl_element_pair_dma(struct isci_host *ihost,
+ struct isci_request *ireq, u32 idx)
+{
+ u32 offset;
+
+ if (idx == 0) {
+ offset = (void *) &ireq->tc->sgl_pair_ab -
+ (void *) &ihost->task_context_table[0];
+ return ihost->task_context_dma + offset;
+ } else if (idx == 1) {
+ offset = (void *) &ireq->tc->sgl_pair_cd -
+ (void *) &ihost->task_context_table[0];
+ return ihost->task_context_dma + offset;
+ }
+
+ return sci_io_request_get_dma_addr(ireq, &ireq->sg_table[idx - 2]);
+}
+
+static void init_sgl_element(struct scu_sgl_element *e, struct scatterlist *sg)
+{
+ e->length = sg_dma_len(sg);
+ e->address_upper = upper_32_bits(sg_dma_address(sg));
+ e->address_lower = lower_32_bits(sg_dma_address(sg));
+ e->address_modifier = 0;
+}
+
+static void sci_request_build_sgl(struct isci_request *ireq)
+{
+ struct isci_host *ihost = ireq->isci_host;
+ struct sas_task *task = isci_request_access_task(ireq);
+ struct scatterlist *sg = NULL;
+ dma_addr_t dma_addr;
+ u32 sg_idx = 0;
+ struct scu_sgl_element_pair *scu_sg = NULL;
+ struct scu_sgl_element_pair *prev_sg = NULL;
+
+ if (task->num_scatter > 0) {
+ sg = task->scatter;
+
+ while (sg) {
+ scu_sg = to_sgl_element_pair(ireq, sg_idx);
+ init_sgl_element(&scu_sg->A, sg);
+ sg = sg_next(sg);
+ if (sg) {
+ init_sgl_element(&scu_sg->B, sg);
+ sg = sg_next(sg);
+ } else
+ memset(&scu_sg->B, 0, sizeof(scu_sg->B));
+
+ if (prev_sg) {
+ dma_addr = to_sgl_element_pair_dma(ihost,
+ ireq,
+ sg_idx);
+
+ prev_sg->next_pair_upper =
+ upper_32_bits(dma_addr);
+ prev_sg->next_pair_lower =
+ lower_32_bits(dma_addr);
+ }
+
+ prev_sg = scu_sg;
+ sg_idx++;
+ }
+ } else { /* handle when no sg */
+ scu_sg = to_sgl_element_pair(ireq, sg_idx);
+
+ dma_addr = dma_map_single(&ihost->pdev->dev,
+ task->scatter,
+ task->total_xfer_len,
+ task->data_dir);
+
+ ireq->zero_scatter_daddr = dma_addr;
+
+ scu_sg->A.length = task->total_xfer_len;
+ scu_sg->A.address_upper = upper_32_bits(dma_addr);
+ scu_sg->A.address_lower = lower_32_bits(dma_addr);
+ }
+
+ if (scu_sg) {
+ scu_sg->next_pair_upper = 0;
+ scu_sg->next_pair_lower = 0;
+ }
+}
+
+static void sci_io_request_build_ssp_command_iu(struct isci_request *ireq)
+{
+ struct ssp_cmd_iu *cmd_iu;
+ struct sas_task *task = isci_request_access_task(ireq);
+
+ cmd_iu = &ireq->ssp.cmd;
+
+ memcpy(cmd_iu->LUN, task->ssp_task.LUN, 8);
+ cmd_iu->add_cdb_len = 0;
+ cmd_iu->_r_a = 0;
+ cmd_iu->_r_b = 0;
+ cmd_iu->en_fburst = 0; /* unsupported */
+ cmd_iu->task_prio = task->ssp_task.task_prio;
+ cmd_iu->task_attr = task->ssp_task.task_attr;
+ cmd_iu->_r_c = 0;
+
+ sci_swab32_cpy(&cmd_iu->cdb, task->ssp_task.cdb,
+ sizeof(task->ssp_task.cdb) / sizeof(u32));
+}
+
+static void sci_task_request_build_ssp_task_iu(struct isci_request *ireq)
+{
+ struct ssp_task_iu *task_iu;
+ struct sas_task *task = isci_request_access_task(ireq);
+ struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq);
+
+ task_iu = &ireq->ssp.tmf;
+
+ memset(task_iu, 0, sizeof(struct ssp_task_iu));
+
+ memcpy(task_iu->LUN, task->ssp_task.LUN, 8);
+
+ task_iu->task_func = isci_tmf->tmf_code;
+ task_iu->task_tag =
+ (ireq->ttype == tmf_task) ?
+ isci_tmf->io_tag :
+ SCI_CONTROLLER_INVALID_IO_TAG;
+}
+
+/**
+ * This method is will fill in the SCU Task Context for any type of SSP request.
+ * @sci_req:
+ * @task_context:
+ *
+ */
+static void scu_ssp_reqeust_construct_task_context(
+ struct isci_request *ireq,
+ struct scu_task_context *task_context)
+{
+ dma_addr_t dma_addr;
+ struct isci_remote_device *idev;
+ struct isci_port *iport;
+
+ idev = ireq->target_device;
+ iport = idev->owning_port;
+
+ /* Fill in the TC with the its required data */
+ task_context->abort = 0;
+ task_context->priority = 0;
+ task_context->initiator_request = 1;
+ task_context->connection_rate = idev->connection_rate;
+ task_context->protocol_engine_index = ISCI_PEG;
+ task_context->logical_port_index = iport->physical_port_index;
+ task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP;
+ task_context->valid = SCU_TASK_CONTEXT_VALID;
+ task_context->context_type = SCU_TASK_CONTEXT_TYPE;
+
+ task_context->remote_node_index = idev->rnc.remote_node_index;
+ task_context->command_code = 0;
+
+ task_context->link_layer_control = 0;
+ task_context->do_not_dma_ssp_good_response = 1;
+ task_context->strict_ordering = 0;
+ task_context->control_frame = 0;
+ task_context->timeout_enable = 0;
+ task_context->block_guard_enable = 0;
+
+ task_context->address_modifier = 0;
+
+ /* task_context->type.ssp.tag = ireq->io_tag; */
+ task_context->task_phase = 0x01;
+
+ ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
+ (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
+ (iport->physical_port_index <<
+ SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) |
+ ISCI_TAG_TCI(ireq->io_tag));
+
+ /*
+ * Copy the physical address for the command buffer to the
+ * SCU Task Context
+ */
+ dma_addr = sci_io_request_get_dma_addr(ireq, &ireq->ssp.cmd);
+
+ task_context->command_iu_upper = upper_32_bits(dma_addr);
+ task_context->command_iu_lower = lower_32_bits(dma_addr);
+
+ /*
+ * Copy the physical address for the response buffer to the
+ * SCU Task Context
+ */
+ dma_addr = sci_io_request_get_dma_addr(ireq, &ireq->ssp.rsp);
+
+ task_context->response_iu_upper = upper_32_bits(dma_addr);
+ task_context->response_iu_lower = lower_32_bits(dma_addr);
+}
+
+/**
+ * This method is will fill in the SCU Task Context for a SSP IO request.
+ * @sci_req:
+ *
+ */
+static void scu_ssp_io_request_construct_task_context(struct isci_request *ireq,
+ enum dma_data_direction dir,
+ u32 len)
+{
+ struct scu_task_context *task_context = ireq->tc;
+
+ scu_ssp_reqeust_construct_task_context(ireq, task_context);
+
+ task_context->ssp_command_iu_length =
+ sizeof(struct ssp_cmd_iu) / sizeof(u32);
+ task_context->type.ssp.frame_type = SSP_COMMAND;
+
+ switch (dir) {
+ case DMA_FROM_DEVICE:
+ case DMA_NONE:
+ default:
+ task_context->task_type = SCU_TASK_TYPE_IOREAD;
+ break;
+ case DMA_TO_DEVICE:
+ task_context->task_type = SCU_TASK_TYPE_IOWRITE;
+ break;
+ }
+
+ task_context->transfer_length_bytes = len;
+
+ if (task_context->transfer_length_bytes > 0)
+ sci_request_build_sgl(ireq);
+}
+
+/**
+ * This method will fill in the SCU Task Context for a SSP Task request. The
+ * following important settings are utilized: -# priority ==
+ * SCU_TASK_PRIORITY_HIGH. This ensures that the task request is issued
+ * ahead of other task destined for the same Remote Node. -# task_type ==
+ * SCU_TASK_TYPE_IOREAD. This simply indicates that a normal request type
+ * (i.e. non-raw frame) is being utilized to perform task management. -#
+ * control_frame == 1. This ensures that the proper endianess is set so
+ * that the bytes are transmitted in the right order for a task frame.
+ * @sci_req: This parameter specifies the task request object being
+ * constructed.
+ *
+ */
+static void scu_ssp_task_request_construct_task_context(struct isci_request *ireq)
+{
+ struct scu_task_context *task_context = ireq->tc;
+
+ scu_ssp_reqeust_construct_task_context(ireq, task_context);
+
+ task_context->control_frame = 1;
+ task_context->priority = SCU_TASK_PRIORITY_HIGH;
+ task_context->task_type = SCU_TASK_TYPE_RAW_FRAME;
+ task_context->transfer_length_bytes = 0;
+ task_context->type.ssp.frame_type = SSP_TASK;
+ task_context->ssp_command_iu_length =
+ sizeof(struct ssp_task_iu) / sizeof(u32);
+}
+
+/**
+ * This method is will fill in the SCU Task Context for any type of SATA
+ * request. This is called from the various SATA constructors.
+ * @sci_req: The general IO request object which is to be used in
+ * constructing the SCU task context.
+ * @task_context: The buffer pointer for the SCU task context which is being
+ * constructed.
+ *
+ * The general io request construction is complete. The buffer assignment for
+ * the command buffer is complete. none Revisit task context construction to
+ * determine what is common for SSP/SMP/STP task context structures.
+ */
+static void scu_sata_reqeust_construct_task_context(
+ struct isci_request *ireq,
+ struct scu_task_context *task_context)
+{
+ dma_addr_t dma_addr;
+ struct isci_remote_device *idev;
+ struct isci_port *iport;
+
+ idev = ireq->target_device;
+ iport = idev->owning_port;
+
+ /* Fill in the TC with the its required data */
+ task_context->abort = 0;
+ task_context->priority = SCU_TASK_PRIORITY_NORMAL;
+ task_context->initiator_request = 1;
+ task_context->connection_rate = idev->connection_rate;
+ task_context->protocol_engine_index = ISCI_PEG;
+ task_context->logical_port_index = iport->physical_port_index;
+ task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP;
+ task_context->valid = SCU_TASK_CONTEXT_VALID;
+ task_context->context_type = SCU_TASK_CONTEXT_TYPE;
+
+ task_context->remote_node_index = idev->rnc.remote_node_index;
+ task_context->command_code = 0;
+
+ task_context->link_layer_control = 0;
+ task_context->do_not_dma_ssp_good_response = 1;
+ task_context->strict_ordering = 0;
+ task_context->control_frame = 0;
+ task_context->timeout_enable = 0;
+ task_context->block_guard_enable = 0;
+
+ task_context->address_modifier = 0;
+ task_context->task_phase = 0x01;
+
+ task_context->ssp_command_iu_length =
+ (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32);
+
+ /* Set the first word of the H2D REG FIS */
+ task_context->type.words[0] = *(u32 *)&ireq->stp.cmd;
+
+ ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
+ (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
+ (iport->physical_port_index <<
+ SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) |
+ ISCI_TAG_TCI(ireq->io_tag));
+ /*
+ * Copy the physical address for the command buffer to the SCU Task
+ * Context. We must offset the command buffer by 4 bytes because the
+ * first 4 bytes are transfered in the body of the TC.
+ */
+ dma_addr = sci_io_request_get_dma_addr(ireq,
+ ((char *) &ireq->stp.cmd) +
+ sizeof(u32));
+
+ task_context->command_iu_upper = upper_32_bits(dma_addr);
+ task_context->command_iu_lower = lower_32_bits(dma_addr);
+
+ /* SATA Requests do not have a response buffer */
+ task_context->response_iu_upper = 0;
+ task_context->response_iu_lower = 0;
+}
+
+static void scu_stp_raw_request_construct_task_context(struct isci_request *ireq)
+{
+ struct scu_task_context *task_context = ireq->tc;
+
+ scu_sata_reqeust_construct_task_context(ireq, task_context);
+
+ task_context->control_frame = 0;
+ task_context->priority = SCU_TASK_PRIORITY_NORMAL;
+ task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME;
+ task_context->type.stp.fis_type = FIS_REGH2D;
+ task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32);
+}
+
+static enum sci_status sci_stp_pio_request_construct(struct isci_request *ireq,
+ bool copy_rx_frame)
+{
+ struct isci_stp_request *stp_req = &ireq->stp.req;
+
+ scu_stp_raw_request_construct_task_context(ireq);
+
+ stp_req->status = 0;
+ stp_req->sgl.offset = 0;
+ stp_req->sgl.set = SCU_SGL_ELEMENT_PAIR_A;
+
+ if (copy_rx_frame) {
+ sci_request_build_sgl(ireq);
+ stp_req->sgl.index = 0;
+ } else {
+ /* The user does not want the data copied to the SGL buffer location */
+ stp_req->sgl.index = -1;
+ }
+
+ return SCI_SUCCESS;
+}
+
+/**
+ *
+ * @sci_req: This parameter specifies the request to be constructed as an
+ * optimized request.
+ * @optimized_task_type: This parameter specifies whether the request is to be
+ * an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A
+ * value of 1 indicates NCQ.
+ *
+ * This method will perform request construction common to all types of STP
+ * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method
+ * returns an indication as to whether the construction was successful.
+ */
+static void sci_stp_optimized_request_construct(struct isci_request *ireq,
+ u8 optimized_task_type,
+ u32 len,
+ enum dma_data_direction dir)
+{
+ struct scu_task_context *task_context = ireq->tc;
+
+ /* Build the STP task context structure */
+ scu_sata_reqeust_construct_task_context(ireq, task_context);
+
+ /* Copy over the SGL elements */
+ sci_request_build_sgl(ireq);
+
+ /* Copy over the number of bytes to be transfered */
+ task_context->transfer_length_bytes = len;
+
+ if (dir == DMA_TO_DEVICE) {
+ /*
+ * The difference between the DMA IN and DMA OUT request task type
+ * values are consistent with the difference between FPDMA READ
+ * and FPDMA WRITE values. Add the supplied task type parameter
+ * to this difference to set the task type properly for this
+ * DATA OUT (WRITE) case. */
+ task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT
+ - SCU_TASK_TYPE_DMA_IN);
+ } else {
+ /*
+ * For the DATA IN (READ) case, simply save the supplied
+ * optimized task type. */
+ task_context->task_type = optimized_task_type;
+ }
+}
+
+
+
+static enum sci_status
+sci_io_request_construct_sata(struct isci_request *ireq,
+ u32 len,
+ enum dma_data_direction dir,
+ bool copy)
+{
+ enum sci_status status = SCI_SUCCESS;
+ struct sas_task *task = isci_request_access_task(ireq);
+
+ /* check for management protocols */
+ if (ireq->ttype == tmf_task) {
+ struct isci_tmf *tmf = isci_request_access_tmf(ireq);
+
+ if (tmf->tmf_code == isci_tmf_sata_srst_high ||
+ tmf->tmf_code == isci_tmf_sata_srst_low) {
+ scu_stp_raw_request_construct_task_context(ireq);
+ return SCI_SUCCESS;
+ } else {
+ dev_err(&ireq->owning_controller->pdev->dev,
+ "%s: Request 0x%p received un-handled SAT "
+ "management protocol 0x%x.\n",
+ __func__, ireq, tmf->tmf_code);
+
+ return SCI_FAILURE;
+ }
+ }
+
+ if (!sas_protocol_ata(task->task_proto)) {
+ dev_err(&ireq->owning_controller->pdev->dev,
+ "%s: Non-ATA protocol in SATA path: 0x%x\n",
+ __func__,
+ task->task_proto);
+ return SCI_FAILURE;
+
+ }
+
+ /* non data */
+ if (task->data_dir == DMA_NONE) {
+ scu_stp_raw_request_construct_task_context(ireq);
+ return SCI_SUCCESS;
+ }
+
+ /* NCQ */
+ if (task->ata_task.use_ncq) {
+ sci_stp_optimized_request_construct(ireq,
+ SCU_TASK_TYPE_FPDMAQ_READ,
+ len, dir);
+ return SCI_SUCCESS;
+ }
+
+ /* DMA */
+ if (task->ata_task.dma_xfer) {
+ sci_stp_optimized_request_construct(ireq,
+ SCU_TASK_TYPE_DMA_IN,
+ len, dir);
+ return SCI_SUCCESS;
+ } else /* PIO */
+ return sci_stp_pio_request_construct(ireq, copy);
+
+ return status;
+}
+
+static enum sci_status sci_io_request_construct_basic_ssp(struct isci_request *ireq)
+{
+ struct sas_task *task = isci_request_access_task(ireq);
+
+ ireq->protocol = SCIC_SSP_PROTOCOL;
+
+ scu_ssp_io_request_construct_task_context(ireq,
+ task->data_dir,
+ task->total_xfer_len);
+
+ sci_io_request_build_ssp_command_iu(ireq);
+
+ sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED);
+
+ return SCI_SUCCESS;
+}
+
+enum sci_status sci_task_request_construct_ssp(
+ struct isci_request *ireq)
+{
+ /* Construct the SSP Task SCU Task Context */
+ scu_ssp_task_request_construct_task_context(ireq);
+
+ /* Fill in the SSP Task IU */
+ sci_task_request_build_ssp_task_iu(ireq);
+
+ sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED);
+
+ return SCI_SUCCESS;
+}
+
+static enum sci_status sci_io_request_construct_basic_sata(struct isci_request *ireq)
+{
+ enum sci_status status;
+ bool copy = false;
+ struct sas_task *task = isci_request_access_task(ireq);
+
+ ireq->protocol = SCIC_STP_PROTOCOL;
+
+ copy = (task->data_dir == DMA_NONE) ? false : true;
+
+ status = sci_io_request_construct_sata(ireq,
+ task->total_xfer_len,
+ task->data_dir,
+ copy);
+
+ if (status == SCI_SUCCESS)
+ sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED);
+
+ return status;
+}
+
+enum sci_status sci_task_request_construct_sata(struct isci_request *ireq)
+{
+ enum sci_status status = SCI_SUCCESS;
+
+ /* check for management protocols */
+ if (ireq->ttype == tmf_task) {
+ struct isci_tmf *tmf = isci_request_access_tmf(ireq);
+
+ if (tmf->tmf_code == isci_tmf_sata_srst_high ||
+ tmf->tmf_code == isci_tmf_sata_srst_low) {
+ scu_stp_raw_request_construct_task_context(ireq);
+ } else {
+ dev_err(&ireq->owning_controller->pdev->dev,
+ "%s: Request 0x%p received un-handled SAT "
+ "Protocol 0x%x.\n",
+ __func__, ireq, tmf->tmf_code);
+
+ return SCI_FAILURE;
+ }
+ }
+
+ if (status != SCI_SUCCESS)
+ return status;
+ sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED);
+
+ return status;
+}
+
+/**
+ * sci_req_tx_bytes - bytes transferred when reply underruns request
+ * @sci_req: request that was terminated early
+ */
+#define SCU_TASK_CONTEXT_SRAM 0x200000
+static u32 sci_req_tx_bytes(struct isci_request *ireq)
+{
+ struct isci_host *ihost = ireq->owning_controller;
+ u32 ret_val = 0;
+
+ if (readl(&ihost->smu_registers->address_modifier) == 0) {
+ void __iomem *scu_reg_base = ihost->scu_registers;
+
+ /* get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where
+ * BAR1 is the scu_registers
+ * 0x20002C = 0x200000 + 0x2c
+ * = start of task context SRAM + offset of (type.ssp.data_offset)
+ * TCi is the io_tag of struct sci_request
+ */
+ ret_val = readl(scu_reg_base +
+ (SCU_TASK_CONTEXT_SRAM + offsetof(struct scu_task_context, type.ssp.data_offset)) +
+ ((sizeof(struct scu_task_context)) * ISCI_TAG_TCI(ireq->io_tag)));
+ }
+
+ return ret_val;
+}
+
+enum sci_status sci_request_start(struct isci_request *ireq)
+{
+ enum sci_base_request_states state;
+ struct scu_task_context *tc = ireq->tc;
+ struct isci_host *ihost = ireq->owning_controller;
+
+ state = ireq->sm.current_state_id;
+ if (state != SCI_REQ_CONSTRUCTED) {
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC IO Request requested to start while in wrong "
+ "state %d\n", __func__, state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ tc->task_index = ISCI_TAG_TCI(ireq->io_tag);
+
+ switch (tc->protocol_type) {
+ case SCU_TASK_CONTEXT_PROTOCOL_SMP:
+ case SCU_TASK_CONTEXT_PROTOCOL_SSP:
+ /* SSP/SMP Frame */
+ tc->type.ssp.tag = ireq->io_tag;
+ tc->type.ssp.target_port_transfer_tag = 0xFFFF;
+ break;
+
+ case SCU_TASK_CONTEXT_PROTOCOL_STP:
+ /* STP/SATA Frame
+ * tc->type.stp.ncq_tag = ireq->ncq_tag;
+ */
+ break;
+
+ case SCU_TASK_CONTEXT_PROTOCOL_NONE:
+ /* / @todo When do we set no protocol type? */
+ break;
+
+ default:
+ /* This should never happen since we build the IO
+ * requests */
+ break;
+ }
+
+ /* Add to the post_context the io tag value */
+ ireq->post_context |= ISCI_TAG_TCI(ireq->io_tag);
+
+ /* Everything is good go ahead and change state */
+ sci_change_state(&ireq->sm, SCI_REQ_STARTED);
+
+ return SCI_SUCCESS;
+}
+
+enum sci_status
+sci_io_request_terminate(struct isci_request *ireq)
+{
+ enum sci_base_request_states state;
+
+ state = ireq->sm.current_state_id;
+
+ switch (state) {
+ case SCI_REQ_CONSTRUCTED:
+ ireq->scu_status = SCU_TASK_DONE_TASK_ABORT;
+ ireq->sci_status = SCI_FAILURE_IO_TERMINATED;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ return SCI_SUCCESS;
+ case SCI_REQ_STARTED:
+ case SCI_REQ_TASK_WAIT_TC_COMP:
+ case SCI_REQ_SMP_WAIT_RESP:
+ case SCI_REQ_SMP_WAIT_TC_COMP:
+ case SCI_REQ_STP_UDMA_WAIT_TC_COMP:
+ case SCI_REQ_STP_UDMA_WAIT_D2H:
+ case SCI_REQ_STP_NON_DATA_WAIT_H2D:
+ case SCI_REQ_STP_NON_DATA_WAIT_D2H:
+ case SCI_REQ_STP_PIO_WAIT_H2D:
+ case SCI_REQ_STP_PIO_WAIT_FRAME:
+ case SCI_REQ_STP_PIO_DATA_IN:
+ case SCI_REQ_STP_PIO_DATA_OUT:
+ case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED:
+ case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG:
+ case SCI_REQ_STP_SOFT_RESET_WAIT_D2H:
+ sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
+ return SCI_SUCCESS;
+ case SCI_REQ_TASK_WAIT_TC_RESP:
+ sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ return SCI_SUCCESS;
+ case SCI_REQ_ABORTING:
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ return SCI_SUCCESS;
+ case SCI_REQ_COMPLETED:
+ default:
+ dev_warn(&ireq->owning_controller->pdev->dev,
+ "%s: SCIC IO Request requested to abort while in wrong "
+ "state %d\n",
+ __func__,
+ ireq->sm.current_state_id);
+ break;
+ }
+
+ return SCI_FAILURE_INVALID_STATE;
+}
+
+enum sci_status sci_request_complete(struct isci_request *ireq)
+{
+ enum sci_base_request_states state;
+ struct isci_host *ihost = ireq->owning_controller;
+
+ state = ireq->sm.current_state_id;
+ if (WARN_ONCE(state != SCI_REQ_COMPLETED,
+ "isci: request completion from wrong state (%d)\n", state))
+ return SCI_FAILURE_INVALID_STATE;
+
+ if (ireq->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX)
+ sci_controller_release_frame(ihost,
+ ireq->saved_rx_frame_index);
+
+ /* XXX can we just stop the machine and remove the 'final' state? */
+ sci_change_state(&ireq->sm, SCI_REQ_FINAL);
+ return SCI_SUCCESS;
+}
+
+enum sci_status sci_io_request_event_handler(struct isci_request *ireq,
+ u32 event_code)
+{
+ enum sci_base_request_states state;
+ struct isci_host *ihost = ireq->owning_controller;
+
+ state = ireq->sm.current_state_id;
+
+ if (state != SCI_REQ_STP_PIO_DATA_IN) {
+ dev_warn(&ihost->pdev->dev, "%s: (%x) in wrong state %d\n",
+ __func__, event_code, state);
+
+ return SCI_FAILURE_INVALID_STATE;
+ }
+
+ switch (scu_get_event_specifier(event_code)) {
+ case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT:
+ /* We are waiting for data and the SCU has R_ERR the data frame.
+ * Go back to waiting for the D2H Register FIS
+ */
+ sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
+ return SCI_SUCCESS;
+ default:
+ dev_err(&ihost->pdev->dev,
+ "%s: pio request unexpected event %#x\n",
+ __func__, event_code);
+
+ /* TODO Should we fail the PIO request when we get an
+ * unexpected event?
+ */
+ return SCI_FAILURE;
+ }
+}
+
+/*
+ * This function copies response data for requests returning response data
+ * instead of sense data.
+ * @sci_req: This parameter specifies the request object for which to copy
+ * the response data.
+ */
+static void sci_io_request_copy_response(struct isci_request *ireq)
+{
+ void *resp_buf;
+ u32 len;
+ struct ssp_response_iu *ssp_response;
+ struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq);
+
+ ssp_response = &ireq->ssp.rsp;
+
+ resp_buf = &isci_tmf->resp.resp_iu;
+
+ len = min_t(u32,
+ SSP_RESP_IU_MAX_SIZE,
+ be32_to_cpu(ssp_response->response_data_len));
+
+ memcpy(resp_buf, ssp_response->resp_data, len);
+}
+
+static enum sci_status
+request_started_state_tc_event(struct isci_request *ireq,
+ u32 completion_code)
+{
+ struct ssp_response_iu *resp_iu;
+ u8 datapres;
+
+ /* TODO: Any SDMA return code of other than 0 is bad decode 0x003C0000
+ * to determine SDMA status
+ */
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ break;
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): {
+ /* There are times when the SCU hardware will return an early
+ * response because the io request specified more data than is
+ * returned by the target device (mode pages, inquiry data,
+ * etc.). We must check the response stats to see if this is
+ * truly a failed request or a good request that just got
+ * completed early.
+ */
+ struct ssp_response_iu *resp = &ireq->ssp.rsp;
+ ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32);
+
+ sci_swab32_cpy(&ireq->ssp.rsp,
+ &ireq->ssp.rsp,
+ word_cnt);
+
+ if (resp->status == 0) {
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS_IO_DONE_EARLY;
+ } else {
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
+ }
+ break;
+ }
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): {
+ ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32);
+
+ sci_swab32_cpy(&ireq->ssp.rsp,
+ &ireq->ssp.rsp,
+ word_cnt);
+
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
+ break;
+ }
+
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR):
+ /* TODO With TASK_DONE_RESP_LEN_ERR is the response frame
+ * guaranteed to be received before this completion status is
+ * posted?
+ */
+ resp_iu = &ireq->ssp.rsp;
+ datapres = resp_iu->datapres;
+
+ if (datapres == 1 || datapres == 2) {
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
+ } else {
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ }
+ break;
+ /* only stp device gets suspended. */
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_PERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_DATA_LEN_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_ABORT_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_WD_LEN):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_RESP):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR):
+ if (ireq->protocol == SCIC_STP_PROTOCOL) {
+ ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
+ SCU_COMPLETION_TL_STATUS_SHIFT;
+ ireq->sci_status = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED;
+ } else {
+ ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
+ SCU_COMPLETION_TL_STATUS_SHIFT;
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ }
+ break;
+
+ /* both stp/ssp device gets suspended */
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LF_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_WRONG_DESTINATION):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_BAD_DESTINATION):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_ZONE_VIOLATION):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED):
+ ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
+ SCU_COMPLETION_TL_STATUS_SHIFT;
+ ireq->sci_status = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED;
+ break;
+
+ /* neither ssp nor stp gets suspended. */
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_CMD_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_XR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_IU_LEN_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDMA_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OFFSET_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EXCESS_DATA):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_DATA):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OPEN_FAIL):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_VIIT_ENTRY_NV):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_IIT_ENTRY_NV):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND):
+ default:
+ ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >>
+ SCU_COMPLETION_TL_STATUS_SHIFT;
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ break;
+ }
+
+ /*
+ * TODO: This is probably wrong for ACK/NAK timeout conditions
+ */
+
+ /* In all cases we will treat this as the completion of the IO req. */
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ return SCI_SUCCESS;
+}
+
+static enum sci_status
+request_aborting_state_tc_event(struct isci_request *ireq,
+ u32 completion_code)
+{
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT):
+ case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT):
+ ireq->scu_status = SCU_TASK_DONE_TASK_ABORT;
+ ireq->sci_status = SCI_FAILURE_IO_TERMINATED;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+
+ default:
+ /* Unless we get some strange error wait for the task abort to complete
+ * TODO: Should there be a state change for this completion?
+ */
+ break;
+ }
+
+ return SCI_SUCCESS;
+}
+
+static enum sci_status ssp_task_request_await_tc_event(struct isci_request *ireq,
+ u32 completion_code)
+{
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, SCI_REQ_TASK_WAIT_TC_RESP);
+ break;
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO):
+ /* Currently, the decision is to simply allow the task request
+ * to timeout if the task IU wasn't received successfully.
+ * There is a potential for receiving multiple task responses if
+ * we decide to send the task IU again.
+ */
+ dev_warn(&ireq->owning_controller->pdev->dev,
+ "%s: TaskRequest:0x%p CompletionCode:%x - "
+ "ACK/NAK timeout\n", __func__, ireq,
+ completion_code);
+
+ sci_change_state(&ireq->sm, SCI_REQ_TASK_WAIT_TC_RESP);
+ break;
+ default:
+ /*
+ * All other completion status cause the IO to be complete.
+ * If a NAK was received, then it is up to the user to retry
+ * the request.
+ */
+ ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ }
+
+ return SCI_SUCCESS;
+}
+
+static enum sci_status
+smp_request_await_response_tc_event(struct isci_request *ireq,
+ u32 completion_code)
+{
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+ /* In the AWAIT RESPONSE state, any TC completion is
+ * unexpected. but if the TC has success status, we
+ * complete the IO anyway.
+ */
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR):
+ /* These status has been seen in a specific LSI
+ * expander, which sometimes is not able to send smp
+ * response within 2 ms. This causes our hardware break
+ * the connection and set TC completion with one of
+ * these SMP_XXX_XX_ERR status. For these type of error,
+ * we ask ihost user to retry the request.
+ */
+ ireq->scu_status = SCU_TASK_DONE_SMP_RESP_TO_ERR;
+ ireq->sci_status = SCI_FAILURE_RETRY_REQUIRED;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ default:
+ /* All other completion status cause the IO to be complete. If a NAK
+ * was received, then it is up to the user to retry the request
+ */
+ ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ }
+
+ return SCI_SUCCESS;
+}
+
+static enum sci_status
+smp_request_await_tc_event(struct isci_request *ireq,
+ u32 completion_code)
+{
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ default:
+ /* All other completion status cause the IO to be
+ * complete. If a NAK was received, then it is up to
+ * the user to retry the request.
+ */
+ ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ }
+
+ return SCI_SUCCESS;
+}
+
+static struct scu_sgl_element *pio_sgl_next(struct isci_stp_request *stp_req)
+{
+ struct scu_sgl_element *sgl;
+ struct scu_sgl_element_pair *sgl_pair;
+ struct isci_request *ireq = to_ireq(stp_req);
+ struct isci_stp_pio_sgl *pio_sgl = &stp_req->sgl;
+
+ sgl_pair = to_sgl_element_pair(ireq, pio_sgl->index);
+ if (!sgl_pair)
+ sgl = NULL;
+ else if (pio_sgl->set == SCU_SGL_ELEMENT_PAIR_A) {
+ if (sgl_pair->B.address_lower == 0 &&
+ sgl_pair->B.address_upper == 0) {
+ sgl = NULL;
+ } else {
+ pio_sgl->set = SCU_SGL_ELEMENT_PAIR_B;
+ sgl = &sgl_pair->B;
+ }
+ } else {
+ if (sgl_pair->next_pair_lower == 0 &&
+ sgl_pair->next_pair_upper == 0) {
+ sgl = NULL;
+ } else {
+ pio_sgl->index++;
+ pio_sgl->set = SCU_SGL_ELEMENT_PAIR_A;
+ sgl_pair = to_sgl_element_pair(ireq, pio_sgl->index);
+ sgl = &sgl_pair->A;
+ }
+ }
+
+ return sgl;
+}
+
+static enum sci_status
+stp_request_non_data_await_h2d_tc_event(struct isci_request *ireq,
+ u32 completion_code)
+{
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, SCI_REQ_STP_NON_DATA_WAIT_D2H);
+ break;
+
+ default:
+ /* All other completion status cause the IO to be
+ * complete. If a NAK was received, then it is up to
+ * the user to retry the request.
+ */
+ ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ }
+
+ return SCI_SUCCESS;
+}
+
+#define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */
+
+/* transmit DATA_FIS from (current sgl + offset) for input
+ * parameter length. current sgl and offset is alreay stored in the IO request
+ */
+static enum sci_status sci_stp_request_pio_data_out_trasmit_data_frame(
+ struct isci_request *ireq,
+ u32 length)
+{
+ struct isci_stp_request *stp_req = &ireq->stp.req;
+ struct scu_task_context *task_context = ireq->tc;
+ struct scu_sgl_element_pair *sgl_pair;
+ struct scu_sgl_element *current_sgl;
+
+ /* Recycle the TC and reconstruct it for sending out DATA FIS containing
+ * for the data from current_sgl+offset for the input length
+ */
+ sgl_pair = to_sgl_element_pair(ireq, stp_req->sgl.index);
+ if (stp_req->sgl.set == SCU_SGL_ELEMENT_PAIR_A)
+ current_sgl = &sgl_pair->A;
+ else
+ current_sgl = &sgl_pair->B;
+
+ /* update the TC */
+ task_context->command_iu_upper = current_sgl->address_upper;
+ task_context->command_iu_lower = current_sgl->address_lower;
+ task_context->transfer_length_bytes = length;
+ task_context->type.stp.fis_type = FIS_DATA;
+
+ /* send the new TC out. */
+ return sci_controller_continue_io(ireq);
+}
+
+static enum sci_status sci_stp_request_pio_data_out_transmit_data(struct isci_request *ireq)
+{
+ struct isci_stp_request *stp_req = &ireq->stp.req;
+ struct scu_sgl_element_pair *sgl_pair;
+ struct scu_sgl_element *sgl;
+ enum sci_status status;
+ u32 offset;
+ u32 len = 0;
+
+ offset = stp_req->sgl.offset;
+ sgl_pair = to_sgl_element_pair(ireq, stp_req->sgl.index);
+ if (WARN_ONCE(!sgl_pair, "%s: null sgl element", __func__))
+ return SCI_FAILURE;
+
+ if (stp_req->sgl.set == SCU_SGL_ELEMENT_PAIR_A) {
+ sgl = &sgl_pair->A;
+ len = sgl_pair->A.length - offset;
+ } else {
+ sgl = &sgl_pair->B;
+ len = sgl_pair->B.length - offset;
+ }
+
+ if (stp_req->pio_len == 0)
+ return SCI_SUCCESS;
+
+ if (stp_req->pio_len >= len) {
+ status = sci_stp_request_pio_data_out_trasmit_data_frame(ireq, len);
+ if (status != SCI_SUCCESS)
+ return status;
+ stp_req->pio_len -= len;
+
+ /* update the current sgl, offset and save for future */
+ sgl = pio_sgl_next(stp_req);
+ offset = 0;
+ } else if (stp_req->pio_len < len) {
+ sci_stp_request_pio_data_out_trasmit_data_frame(ireq, stp_req->pio_len);
+
+ /* Sgl offset will be adjusted and saved for future */
+ offset += stp_req->pio_len;
+ sgl->address_lower += stp_req->pio_len;
+ stp_req->pio_len = 0;
+ }
+
+ stp_req->sgl.offset = offset;
+
+ return status;
+}
+
+/**
+ *
+ * @stp_request: The request that is used for the SGL processing.
+ * @data_buffer: The buffer of data to be copied.
+ * @length: The length of the data transfer.
+ *
+ * Copy the data from the buffer for the length specified to the IO reqeust SGL
+ * specified data region. enum sci_status
+ */
+static enum sci_status
+sci_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_req,
+ u8 *data_buf, u32 len)
+{
+ struct isci_request *ireq;
+ u8 *src_addr;
+ int copy_len;
+ struct sas_task *task;
+ struct scatterlist *sg;
+ void *kaddr;
+ int total_len = len;
+
+ ireq = to_ireq(stp_req);
+ task = isci_request_access_task(ireq);
+ src_addr = data_buf;
+
+ if (task->num_scatter > 0) {
+ sg = task->scatter;
+
+ while (total_len > 0) {
+ struct page *page = sg_page(sg);
+
+ copy_len = min_t(int, total_len, sg_dma_len(sg));
+ kaddr = kmap_atomic(page, KM_IRQ0);
+ memcpy(kaddr + sg->offset, src_addr, copy_len);
+ kunmap_atomic(kaddr, KM_IRQ0);
+ total_len -= copy_len;
+ src_addr += copy_len;
+ sg = sg_next(sg);
+ }
+ } else {
+ BUG_ON(task->total_xfer_len < total_len);
+ memcpy(task->scatter, src_addr, total_len);
+ }
+
+ return SCI_SUCCESS;
+}
+
+/**
+ *
+ * @sci_req: The PIO DATA IN request that is to receive the data.
+ * @data_buffer: The buffer to copy from.
+ *
+ * Copy the data buffer to the io request data region. enum sci_status
+ */
+static enum sci_status sci_stp_request_pio_data_in_copy_data(
+ struct isci_stp_request *stp_req,
+ u8 *data_buffer)
+{
+ enum sci_status status;
+
+ /*
+ * If there is less than 1K remaining in the transfer request
+ * copy just the data for the transfer */
+ if (stp_req->pio_len < SCU_MAX_FRAME_BUFFER_SIZE) {
+ status = sci_stp_request_pio_data_in_copy_data_buffer(
+ stp_req, data_buffer, stp_req->pio_len);
+
+ if (status == SCI_SUCCESS)
+ stp_req->pio_len = 0;
+ } else {
+ /* We are transfering the whole frame so copy */
+ status = sci_stp_request_pio_data_in_copy_data_buffer(
+ stp_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE);
+
+ if (status == SCI_SUCCESS)
+ stp_req->pio_len -= SCU_MAX_FRAME_BUFFER_SIZE;
+ }
+
+ return status;
+}
+
+static enum sci_status
+stp_request_pio_await_h2d_completion_tc_event(struct isci_request *ireq,
+ u32 completion_code)
+{
+ enum sci_status status = SCI_SUCCESS;
+
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
+ break;
+
+ default:
+ /* All other completion status cause the IO to be
+ * complete. If a NAK was received, then it is up to
+ * the user to retry the request.
+ */
+ ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ }
+
+ return status;
+}
+
+static enum sci_status
+pio_data_out_tx_done_tc_event(struct isci_request *ireq,
+ u32 completion_code)
+{
+ enum sci_status status = SCI_SUCCESS;
+ bool all_frames_transferred = false;
+ struct isci_stp_request *stp_req = &ireq->stp.req;
+
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+ /* Transmit data */
+ if (stp_req->pio_len != 0) {
+ status = sci_stp_request_pio_data_out_transmit_data(ireq);
+ if (status == SCI_SUCCESS) {
+ if (stp_req->pio_len == 0)
+ all_frames_transferred = true;
+ }
+ } else if (stp_req->pio_len == 0) {
+ /*
+ * this will happen if the all data is written at the
+ * first time after the pio setup fis is received
+ */
+ all_frames_transferred = true;
+ }
+
+ /* all data transferred. */
+ if (all_frames_transferred) {
+ /*
+ * Change the state to SCI_REQ_STP_PIO_DATA_IN
+ * and wait for PIO_SETUP fis / or D2H REg fis. */
+ sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
+ }
+ break;
+
+ default:
+ /*
+ * All other completion status cause the IO to be complete.
+ * If a NAK was received, then it is up to the user to retry
+ * the request.
+ */
+ ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ }
+
+ return status;
+}
+
+static enum sci_status sci_stp_request_udma_general_frame_handler(struct isci_request *ireq,
+ u32 frame_index)
+{
+ struct isci_host *ihost = ireq->owning_controller;
+ struct dev_to_host_fis *frame_header;
+ enum sci_status status;
+ u32 *frame_buffer;
+
+ status = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_header);
+
+ if ((status == SCI_SUCCESS) &&
+ (frame_header->fis_type == FIS_REGD2H)) {
+ sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_buffer);
+
+ sci_controller_copy_sata_response(&ireq->stp.rsp,
+ frame_header,
+ frame_buffer);
+ }
+
+ sci_controller_release_frame(ihost, frame_index);
+
+ return status;
+}
+
+enum sci_status
+sci_io_request_frame_handler(struct isci_request *ireq,
+ u32 frame_index)
+{
+ struct isci_host *ihost = ireq->owning_controller;
+ struct isci_stp_request *stp_req = &ireq->stp.req;
+ enum sci_base_request_states state;
+ enum sci_status status;
+ ssize_t word_cnt;
+
+ state = ireq->sm.current_state_id;
+ switch (state) {
+ case SCI_REQ_STARTED: {
+ struct ssp_frame_hdr ssp_hdr;
+ void *frame_header;
+
+ sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ &frame_header);
+
+ word_cnt = sizeof(struct ssp_frame_hdr) / sizeof(u32);
+ sci_swab32_cpy(&ssp_hdr, frame_header, word_cnt);
+
+ if (ssp_hdr.frame_type == SSP_RESPONSE) {
+ struct ssp_response_iu *resp_iu;
+ ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32);
+
+ sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
+ frame_index,
+ (void **)&resp_iu);
+
+ sci_swab32_cpy(&ireq->ssp.rsp, resp_iu, word_cnt);
+
+ resp_iu = &ireq->ssp.rsp;
+
+ if (resp_iu->datapres == 0x01 ||
+ resp_iu->datapres == 0x02) {
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ } else {
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ }
+ } else {
+ /* not a response frame, why did it get forwarded? */
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC IO Request 0x%p received unexpected "
+ "frame %d type 0x%02x\n", __func__, ireq,
+ frame_index, ssp_hdr.frame_type);
+ }
+
+ /*
+ * In any case we are done with this frame buffer return it to
+ * the controller
+ */
+ sci_controller_release_frame(ihost, frame_index);
+
+ return SCI_SUCCESS;
+ }
+
+ case SCI_REQ_TASK_WAIT_TC_RESP:
+ sci_io_request_copy_response(ireq);
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ sci_controller_release_frame(ihost, frame_index);
+ return SCI_SUCCESS;
+
+ case SCI_REQ_SMP_WAIT_RESP: {
+ struct smp_resp *rsp_hdr = &ireq->smp.rsp;
+ void *frame_header;
+
+ sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ &frame_header);
+
+ /* byte swap the header. */
+ word_cnt = SMP_RESP_HDR_SZ / sizeof(u32);
+ sci_swab32_cpy(rsp_hdr, frame_header, word_cnt);
+
+ if (rsp_hdr->frame_type == SMP_RESPONSE) {
+ void *smp_resp;
+
+ sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
+ frame_index,
+ &smp_resp);
+
+ word_cnt = (sizeof(struct smp_resp) - SMP_RESP_HDR_SZ) /
+ sizeof(u32);
+
+ sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ,
+ smp_resp, word_cnt);
+
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, SCI_REQ_SMP_WAIT_TC_COMP);
+ } else {
+ /*
+ * This was not a response frame why did it get
+ * forwarded?
+ */
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC SMP Request 0x%p received unexpected "
+ "frame %d type 0x%02x\n",
+ __func__,
+ ireq,
+ frame_index,
+ rsp_hdr->frame_type);
+
+ ireq->scu_status = SCU_TASK_DONE_SMP_FRM_TYPE_ERR;
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ }
+
+ sci_controller_release_frame(ihost, frame_index);
+
+ return SCI_SUCCESS;
+ }
+
+ case SCI_REQ_STP_UDMA_WAIT_TC_COMP:
+ return sci_stp_request_udma_general_frame_handler(ireq,
+ frame_index);
+
+ case SCI_REQ_STP_UDMA_WAIT_D2H:
+ /* Use the general frame handler to copy the resposne data */
+ status = sci_stp_request_udma_general_frame_handler(ireq, frame_index);
+
+ if (status != SCI_SUCCESS)
+ return status;
+
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ return SCI_SUCCESS;
+
+ case SCI_REQ_STP_NON_DATA_WAIT_D2H: {
+ struct dev_to_host_fis *frame_header;
+ u32 *frame_buffer;
+
+ status = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_header);
+
+ if (status != SCI_SUCCESS) {
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC IO Request 0x%p could not get frame "
+ "header for frame index %d, status %x\n",
+ __func__,
+ stp_req,
+ frame_index,
+ status);
+
+ return status;
+ }
+
+ switch (frame_header->fis_type) {
+ case FIS_REGD2H:
+ sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_buffer);
+
+ sci_controller_copy_sata_response(&ireq->stp.rsp,
+ frame_header,
+ frame_buffer);
+
+ /* The command has completed with error */
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
+ break;
+
+ default:
+ dev_warn(&ihost->pdev->dev,
+ "%s: IO Request:0x%p Frame Id:%d protocol "
+ "violation occurred\n", __func__, stp_req,
+ frame_index);
+
+ ireq->scu_status = SCU_TASK_DONE_UNEXP_FIS;
+ ireq->sci_status = SCI_FAILURE_PROTOCOL_VIOLATION;
+ break;
+ }
+
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+
+ /* Frame has been decoded return it to the controller */
+ sci_controller_release_frame(ihost, frame_index);
+
+ return status;
+ }
+
+ case SCI_REQ_STP_PIO_WAIT_FRAME: {
+ struct sas_task *task = isci_request_access_task(ireq);
+ struct dev_to_host_fis *frame_header;
+ u32 *frame_buffer;
+
+ status = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_header);
+
+ if (status != SCI_SUCCESS) {
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC IO Request 0x%p could not get frame "
+ "header for frame index %d, status %x\n",
+ __func__, stp_req, frame_index, status);
+ return status;
+ }
+
+ switch (frame_header->fis_type) {
+ case FIS_PIO_SETUP:
+ /* Get from the frame buffer the PIO Setup Data */
+ sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_buffer);
+
+ /* Get the data from the PIO Setup The SCU Hardware
+ * returns first word in the frame_header and the rest
+ * of the data is in the frame buffer so we need to
+ * back up one dword
+ */
+
+ /* transfer_count: first 16bits in the 4th dword */
+ stp_req->pio_len = frame_buffer[3] & 0xffff;
+
+ /* status: 4th byte in the 3rd dword */
+ stp_req->status = (frame_buffer[2] >> 24) & 0xff;
+
+ sci_controller_copy_sata_response(&ireq->stp.rsp,
+ frame_header,
+ frame_buffer);
+
+ ireq->stp.rsp.status = stp_req->status;
+
+ /* The next state is dependent on whether the
+ * request was PIO Data-in or Data out
+ */
+ if (task->data_dir == DMA_FROM_DEVICE) {
+ sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_DATA_IN);
+ } else if (task->data_dir == DMA_TO_DEVICE) {
+ /* Transmit data */
+ status = sci_stp_request_pio_data_out_transmit_data(ireq);
+ if (status != SCI_SUCCESS)
+ break;
+ sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_DATA_OUT);
+ }
+ break;
+
+ case FIS_SETDEVBITS:
+ sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
+ break;
+
+ case FIS_REGD2H:
+ if (frame_header->status & ATA_BUSY) {
+ /*
+ * Now why is the drive sending a D2H Register
+ * FIS when it is still busy? Do nothing since
+ * we are still in the right state.
+ */
+ dev_dbg(&ihost->pdev->dev,
+ "%s: SCIC PIO Request 0x%p received "
+ "D2H Register FIS with BSY status "
+ "0x%x\n",
+ __func__,
+ stp_req,
+ frame_header->status);
+ break;
+ }
+
+ sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_buffer);
+
+ sci_controller_copy_sata_response(&ireq->stp.req,
+ frame_header,
+ frame_buffer);
+
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+
+ default:
+ /* FIXME: what do we do here? */
+ break;
+ }
+
+ /* Frame is decoded return it to the controller */
+ sci_controller_release_frame(ihost, frame_index);
+
+ return status;
+ }
+
+ case SCI_REQ_STP_PIO_DATA_IN: {
+ struct dev_to_host_fis *frame_header;
+ struct sata_fis_data *frame_buffer;
+
+ status = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_header);
+
+ if (status != SCI_SUCCESS) {
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC IO Request 0x%p could not get frame "
+ "header for frame index %d, status %x\n",
+ __func__,
+ stp_req,
+ frame_index,
+ status);
+ return status;
+ }
+
+ if (frame_header->fis_type != FIS_DATA) {
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC PIO Request 0x%p received frame %d "
+ "with fis type 0x%02x when expecting a data "
+ "fis.\n",
+ __func__,
+ stp_req,
+ frame_index,
+ frame_header->fis_type);
+
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+
+ /* Frame is decoded return it to the controller */
+ sci_controller_release_frame(ihost, frame_index);
+ return status;
+ }
+
+ if (stp_req->sgl.index < 0) {
+ ireq->saved_rx_frame_index = frame_index;
+ stp_req->pio_len = 0;
+ } else {
+ sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_buffer);
+
+ status = sci_stp_request_pio_data_in_copy_data(stp_req,
+ (u8 *)frame_buffer);
+
+ /* Frame is decoded return it to the controller */
+ sci_controller_release_frame(ihost, frame_index);
+ }
+
+ /* Check for the end of the transfer, are there more
+ * bytes remaining for this data transfer
+ */
+ if (status != SCI_SUCCESS || stp_req->pio_len != 0)
+ return status;
+
+ if ((stp_req->status & ATA_BUSY) == 0) {
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ } else {
+ sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME);
+ }
+ return status;
+ }
+
+ case SCI_REQ_STP_SOFT_RESET_WAIT_D2H: {
+ struct dev_to_host_fis *frame_header;
+ u32 *frame_buffer;
+
+ status = sci_unsolicited_frame_control_get_header(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_header);
+ if (status != SCI_SUCCESS) {
+ dev_err(&ihost->pdev->dev,
+ "%s: SCIC IO Request 0x%p could not get frame "
+ "header for frame index %d, status %x\n",
+ __func__,
+ stp_req,
+ frame_index,
+ status);
+ return status;
+ }
+
+ switch (frame_header->fis_type) {
+ case FIS_REGD2H:
+ sci_unsolicited_frame_control_get_buffer(&ihost->uf_control,
+ frame_index,
+ (void **)&frame_buffer);
+
+ sci_controller_copy_sata_response(&ireq->stp.rsp,
+ frame_header,
+ frame_buffer);
+
+ /* The command has completed with error */
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
+ break;
+
+ default:
+ dev_warn(&ihost->pdev->dev,
+ "%s: IO Request:0x%p Frame Id:%d protocol "
+ "violation occurred\n",
+ __func__,
+ stp_req,
+ frame_index);
+
+ ireq->scu_status = SCU_TASK_DONE_UNEXP_FIS;
+ ireq->sci_status = SCI_FAILURE_PROTOCOL_VIOLATION;
+ break;
+ }
+
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+
+ /* Frame has been decoded return it to the controller */
+ sci_controller_release_frame(ihost, frame_index);
+
+ return status;
+ }
+ case SCI_REQ_ABORTING:
+ /*
+ * TODO: Is it even possible to get an unsolicited frame in the
+ * aborting state?
+ */
+ sci_controller_release_frame(ihost, frame_index);
+ return SCI_SUCCESS;
+
+ default:
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC IO Request given unexpected frame %x while "
+ "in state %d\n",
+ __func__,
+ frame_index,
+ state);
+
+ sci_controller_release_frame(ihost, frame_index);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq,
+ u32 completion_code)
+{
+ enum sci_status status = SCI_SUCCESS;
+
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR):
+ /* We must check ther response buffer to see if the D2H
+ * Register FIS was received before we got the TC
+ * completion.
+ */
+ if (ireq->stp.rsp.fis_type == FIS_REGD2H) {
+ sci_remote_device_suspend(ireq->target_device,
+ SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)));
+
+ ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE;
+ ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ } else {
+ /* If we have an error completion status for the
+ * TC then we can expect a D2H register FIS from
+ * the device so we must change state to wait
+ * for it
+ */
+ sci_change_state(&ireq->sm, SCI_REQ_STP_UDMA_WAIT_D2H);
+ }
+ break;
+
+ /* TODO Check to see if any of these completion status need to
+ * wait for the device to host register fis.
+ */
+ /* TODO We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR
+ * - this comes only for B0
+ */
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR):
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR):
+ sci_remote_device_suspend(ireq->target_device,
+ SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code)));
+ /* Fall through to the default case */
+ default:
+ /* All other completion status cause the IO to be complete. */
+ ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ }
+
+ return status;
+}
+
+static enum sci_status
+stp_request_soft_reset_await_h2d_asserted_tc_event(struct isci_request *ireq,
+ u32 completion_code)
+{
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG);
+ break;
+
+ default:
+ /*
+ * All other completion status cause the IO to be complete.
+ * If a NAK was received, then it is up to the user to retry
+ * the request.
+ */
+ ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ }
+
+ return SCI_SUCCESS;
+}
+
+static enum sci_status
+stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct isci_request *ireq,
+ u32 completion_code)
+{
+ switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) {
+ case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
+ ireq->scu_status = SCU_TASK_DONE_GOOD;
+ ireq->sci_status = SCI_SUCCESS;
+ sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_D2H);
+ break;
+
+ default:
+ /* All other completion status cause the IO to be complete. If
+ * a NAK was received, then it is up to the user to retry the
+ * request.
+ */
+ ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code);
+ ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR;
+ sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
+ break;
+ }
+
+ return SCI_SUCCESS;
+}
+
+enum sci_status
+sci_io_request_tc_completion(struct isci_request *ireq,
+ u32 completion_code)
+{
+ enum sci_base_request_states state;
+ struct isci_host *ihost = ireq->owning_controller;
+
+ state = ireq->sm.current_state_id;
+
+ switch (state) {
+ case SCI_REQ_STARTED:
+ return request_started_state_tc_event(ireq, completion_code);
+
+ case SCI_REQ_TASK_WAIT_TC_COMP:
+ return ssp_task_request_await_tc_event(ireq,
+ completion_code);
+
+ case SCI_REQ_SMP_WAIT_RESP:
+ return smp_request_await_response_tc_event(ireq,
+ completion_code);
+
+ case SCI_REQ_SMP_WAIT_TC_COMP:
+ return smp_request_await_tc_event(ireq, completion_code);
+
+ case SCI_REQ_STP_UDMA_WAIT_TC_COMP:
+ return stp_request_udma_await_tc_event(ireq,
+ completion_code);
+
+ case SCI_REQ_STP_NON_DATA_WAIT_H2D:
+ return stp_request_non_data_await_h2d_tc_event(ireq,
+ completion_code);
+
+ case SCI_REQ_STP_PIO_WAIT_H2D:
+ return stp_request_pio_await_h2d_completion_tc_event(ireq,
+ completion_code);
+
+ case SCI_REQ_STP_PIO_DATA_OUT:
+ return pio_data_out_tx_done_tc_event(ireq, completion_code);
+
+ case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED:
+ return stp_request_soft_reset_await_h2d_asserted_tc_event(ireq,
+ completion_code);
+
+ case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG:
+ return stp_request_soft_reset_await_h2d_diagnostic_tc_event(ireq,
+ completion_code);
+
+ case SCI_REQ_ABORTING:
+ return request_aborting_state_tc_event(ireq,
+ completion_code);
+
+ default:
+ dev_warn(&ihost->pdev->dev,
+ "%s: SCIC IO Request given task completion "
+ "notification %x while in wrong state %d\n",
+ __func__,
+ completion_code,
+ state);
+ return SCI_FAILURE_INVALID_STATE;
+ }
+}
+
+/**
+ * isci_request_process_response_iu() - This function sets the status and
+ * response iu, in the task struct, from the request object for the upper
+ * layer driver.
+ * @sas_task: This parameter is the task struct from the upper layer driver.
+ * @resp_iu: This parameter points to the response iu of the completed request.
+ * @dev: This parameter specifies the linux device struct.
+ *
+ * none.
+ */
+static void isci_request_process_response_iu(
+ struct sas_task *task,
+ struct ssp_response_iu *resp_iu,
+ struct device *dev)
+{
+ dev_dbg(dev,
+ "%s: resp_iu = %p "
+ "resp_iu->status = 0x%x,\nresp_iu->datapres = %d "
+ "resp_iu->response_data_len = %x, "
+ "resp_iu->sense_data_len = %x\nrepsonse data: ",
+ __func__,
+ resp_iu,
+ resp_iu->status,
+ resp_iu->datapres,
+ resp_iu->response_data_len,
+ resp_iu->sense_data_len);
+
+ task->task_status.stat = resp_iu->status;
+
+ /* libsas updates the task status fields based on the response iu. */
+ sas_ssp_task_response(dev, task, resp_iu);
+}
+
+/**
+ * isci_request_set_open_reject_status() - This function prepares the I/O
+ * completion for OPEN_REJECT conditions.
+ * @request: This parameter is the completed isci_request object.
+ * @response_ptr: This parameter specifies the service response for the I/O.
+ * @status_ptr: This parameter specifies the exec status for the I/O.
+ * @complete_to_host_ptr: This parameter specifies the action to be taken by
+ * the LLDD with respect to completing this request or forcing an abort
+ * condition on the I/O.
+ * @open_rej_reason: This parameter specifies the encoded reason for the
+ * abandon-class reject.
+ *
+ * none.
+ */
+static void isci_request_set_open_reject_status(
+ struct isci_request *request,
+ struct sas_task *task,
+ enum service_response *response_ptr,
+ enum exec_status *status_ptr,
+ enum isci_completion_selection *complete_to_host_ptr,
+ enum sas_open_rej_reason open_rej_reason)
+{
+ /* Task in the target is done. */
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+ *response_ptr = SAS_TASK_UNDELIVERED;
+ *status_ptr = SAS_OPEN_REJECT;
+ *complete_to_host_ptr = isci_perform_normal_io_completion;
+ task->task_status.open_rej_reason = open_rej_reason;
+}
+
+/**
+ * isci_request_handle_controller_specific_errors() - This function decodes
+ * controller-specific I/O completion error conditions.
+ * @request: This parameter is the completed isci_request object.
+ * @response_ptr: This parameter specifies the service response for the I/O.
+ * @status_ptr: This parameter specifies the exec status for the I/O.
+ * @complete_to_host_ptr: This parameter specifies the action to be taken by
+ * the LLDD with respect to completing this request or forcing an abort
+ * condition on the I/O.
+ *
+ * none.
+ */
+static void isci_request_handle_controller_specific_errors(
+ struct isci_remote_device *idev,
+ struct isci_request *request,
+ struct sas_task *task,
+ enum service_response *response_ptr,
+ enum exec_status *status_ptr,
+ enum isci_completion_selection *complete_to_host_ptr)
+{
+ unsigned int cstatus;
+
+ cstatus = request->scu_status;
+
+ dev_dbg(&request->isci_host->pdev->dev,
+ "%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR "
+ "- controller status = 0x%x\n",
+ __func__, request, cstatus);
+
+ /* Decode the controller-specific errors; most
+ * important is to recognize those conditions in which
+ * the target may still have a task outstanding that
+ * must be aborted.
+ *
+ * Note that there are SCU completion codes being
+ * named in the decode below for which SCIC has already
+ * done work to handle them in a way other than as
+ * a controller-specific completion code; these are left
+ * in the decode below for completeness sake.
+ */
+ switch (cstatus) {
+ case SCU_TASK_DONE_DMASETUP_DIRERR:
+ /* Also SCU_TASK_DONE_SMP_FRM_TYPE_ERR: */
+ case SCU_TASK_DONE_XFERCNT_ERR:
+ /* Also SCU_TASK_DONE_SMP_UFI_ERR: */
+ if (task->task_proto == SAS_PROTOCOL_SMP) {
+ /* SCU_TASK_DONE_SMP_UFI_ERR == Task Done. */
+ *response_ptr = SAS_TASK_COMPLETE;
+
+ /* See if the device has been/is being stopped. Note
+ * that we ignore the quiesce state, since we are
+ * concerned about the actual device state.
+ */
+ if (!idev)
+ *status_ptr = SAS_DEVICE_UNKNOWN;
+ else
+ *status_ptr = SAS_ABORTED_TASK;
+
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+
+ *complete_to_host_ptr =
+ isci_perform_normal_io_completion;
+ } else {
+ /* Task in the target is not done. */
+ *response_ptr = SAS_TASK_UNDELIVERED;
+
+ if (!idev)
+ *status_ptr = SAS_DEVICE_UNKNOWN;
+ else
+ *status_ptr = SAM_STAT_TASK_ABORTED;
+
+ clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+
+ *complete_to_host_ptr =
+ isci_perform_error_io_completion;
+ }
+
+ break;
+
+ case SCU_TASK_DONE_CRC_ERR:
+ case SCU_TASK_DONE_NAK_CMD_ERR:
+ case SCU_TASK_DONE_EXCESS_DATA:
+ case SCU_TASK_DONE_UNEXP_FIS:
+ /* Also SCU_TASK_DONE_UNEXP_RESP: */
+ case SCU_TASK_DONE_VIIT_ENTRY_NV: /* TODO - conditions? */
+ case SCU_TASK_DONE_IIT_ENTRY_NV: /* TODO - conditions? */
+ case SCU_TASK_DONE_RNCNV_OUTBOUND: /* TODO - conditions? */
+ /* These are conditions in which the target
+ * has completed the task, so that no cleanup
+ * is necessary.
+ */
+ *response_ptr = SAS_TASK_COMPLETE;
+
+ /* See if the device has been/is being stopped. Note
+ * that we ignore the quiesce state, since we are
+ * concerned about the actual device state.
+ */
+ if (!idev)
+ *status_ptr = SAS_DEVICE_UNKNOWN;
+ else
+ *status_ptr = SAS_ABORTED_TASK;
+
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+
+ *complete_to_host_ptr = isci_perform_normal_io_completion;
+ break;
+
+
+ /* Note that the only open reject completion codes seen here will be
+ * abandon-class codes; all others are automatically retried in the SCU.
+ */
+ case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION:
+
+ isci_request_set_open_reject_status(
+ request, task, response_ptr, status_ptr,
+ complete_to_host_ptr, SAS_OREJ_WRONG_DEST);
+ break;
+
+ case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION:
+
+ /* Note - the return of AB0 will change when
+ * libsas implements detection of zone violations.
+ */
+ isci_request_set_open_reject_status(
+ request, task, response_ptr, status_ptr,
+ complete_to_host_ptr, SAS_OREJ_RESV_AB0);
+ break;
+
+ case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1:
+
+ isci_request_set_open_reject_status(
+ request, task, response_ptr, status_ptr,
+ complete_to_host_ptr, SAS_OREJ_RESV_AB1);
+ break;
+
+ case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2:
+
+ isci_request_set_open_reject_status(
+ request, task, response_ptr, status_ptr,
+ complete_to_host_ptr, SAS_OREJ_RESV_AB2);
+ break;
+
+ case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3:
+
+ isci_request_set_open_reject_status(
+ request, task, response_ptr, status_ptr,
+ complete_to_host_ptr, SAS_OREJ_RESV_AB3);
+ break;
+
+ case SCU_TASK_OPEN_REJECT_BAD_DESTINATION:
+
+ isci_request_set_open_reject_status(
+ request, task, response_ptr, status_ptr,
+ complete_to_host_ptr, SAS_OREJ_BAD_DEST);
+ break;
+
+ case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY:
+
+ isci_request_set_open_reject_status(
+ request, task, response_ptr, status_ptr,
+ complete_to_host_ptr, SAS_OREJ_STP_NORES);
+ break;
+
+ case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED:
+
+ isci_request_set_open_reject_status(
+ request, task, response_ptr, status_ptr,
+ complete_to_host_ptr, SAS_OREJ_EPROTO);
+ break;
+
+ case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED:
+
+ isci_request_set_open_reject_status(
+ request, task, response_ptr, status_ptr,
+ complete_to_host_ptr, SAS_OREJ_CONN_RATE);
+ break;
+
+ case SCU_TASK_DONE_LL_R_ERR:
+ /* Also SCU_TASK_DONE_ACK_NAK_TO: */
+ case SCU_TASK_DONE_LL_PERR:
+ case SCU_TASK_DONE_LL_SY_TERM:
+ /* Also SCU_TASK_DONE_NAK_ERR:*/
+ case SCU_TASK_DONE_LL_LF_TERM:
+ /* Also SCU_TASK_DONE_DATA_LEN_ERR: */
+ case SCU_TASK_DONE_LL_ABORT_ERR:
+ case SCU_TASK_DONE_SEQ_INV_TYPE:
+ /* Also SCU_TASK_DONE_UNEXP_XR: */
+ case SCU_TASK_DONE_XR_IU_LEN_ERR:
+ case SCU_TASK_DONE_INV_FIS_LEN:
+ /* Also SCU_TASK_DONE_XR_WD_LEN: */
+ case SCU_TASK_DONE_SDMA_ERR:
+ case SCU_TASK_DONE_OFFSET_ERR:
+ case SCU_TASK_DONE_MAX_PLD_ERR:
+ case SCU_TASK_DONE_LF_ERR:
+ case SCU_TASK_DONE_SMP_RESP_TO_ERR: /* Escalate to dev reset? */
+ case SCU_TASK_DONE_SMP_LL_RX_ERR:
+ case SCU_TASK_DONE_UNEXP_DATA:
+ case SCU_TASK_DONE_UNEXP_SDBFIS:
+ case SCU_TASK_DONE_REG_ERR:
+ case SCU_TASK_DONE_SDB_ERR:
+ case SCU_TASK_DONE_TASK_ABORT:
+ default:
+ /* Task in the target is not done. */
+ *response_ptr = SAS_TASK_UNDELIVERED;
+ *status_ptr = SAM_STAT_TASK_ABORTED;
+
+ if (task->task_proto == SAS_PROTOCOL_SMP) {
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+
+ *complete_to_host_ptr = isci_perform_normal_io_completion;
+ } else {
+ clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+
+ *complete_to_host_ptr = isci_perform_error_io_completion;
+ }
+ break;
+ }
+}
+
+/**
+ * isci_task_save_for_upper_layer_completion() - This function saves the
+ * request for later completion to the upper layer driver.
+ * @host: This parameter is a pointer to the host on which the the request
+ * should be queued (either as an error or success).
+ * @request: This parameter is the completed request.
+ * @response: This parameter is the response code for the completed task.
+ * @status: This parameter is the status code for the completed task.
+ *
+ * none.
+ */
+static void isci_task_save_for_upper_layer_completion(
+ struct isci_host *host,
+ struct isci_request *request,
+ enum service_response response,
+ enum exec_status status,
+ enum isci_completion_selection task_notification_selection)
+{
+ struct sas_task *task = isci_request_access_task(request);
+
+ task_notification_selection
+ = isci_task_set_completion_status(task, response, status,
+ task_notification_selection);
+
+ /* Tasks aborted specifically by a call to the lldd_abort_task
+ * function should not be completed to the host in the regular path.
+ */
+ switch (task_notification_selection) {
+
+ case isci_perform_normal_io_completion:
+
+ /* Normal notification (task_done) */
+ dev_dbg(&host->pdev->dev,
+ "%s: Normal - task = %p, response=%d (%d), status=%d (%d)\n",
+ __func__,
+ task,
+ task->task_status.resp, response,
+ task->task_status.stat, status);
+ /* Add to the completed list. */
+ list_add(&request->completed_node,
+ &host->requests_to_complete);
+
+ /* Take the request off the device's pending request list. */
+ list_del_init(&request->dev_node);
+ break;
+
+ case isci_perform_aborted_io_completion:
+ /* No notification to libsas because this request is
+ * already in the abort path.
+ */
+ dev_dbg(&host->pdev->dev,
+ "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n",
+ __func__,
+ task,
+ task->task_status.resp, response,
+ task->task_status.stat, status);
+
+ /* Wake up whatever process was waiting for this
+ * request to complete.
+ */
+ WARN_ON(request->io_request_completion == NULL);
+
+ if (request->io_request_completion != NULL) {
+
+ /* Signal whoever is waiting that this
+ * request is complete.
+ */
+ complete(request->io_request_completion);
+ }
+ break;
+
+ case isci_perform_error_io_completion:
+ /* Use sas_task_abort */
+ dev_dbg(&host->pdev->dev,
+ "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n",
+ __func__,
+ task,
+ task->task_status.resp, response,
+ task->task_status.stat, status);
+ /* Add to the aborted list. */
+ list_add(&request->completed_node,
+ &host->requests_to_errorback);
+ break;
+
+ default:
+ dev_dbg(&host->pdev->dev,
+ "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n",
+ __func__,
+ task,
+ task->task_status.resp, response,
+ task->task_status.stat, status);
+
+ /* Add to the error to libsas list. */
+ list_add(&request->completed_node,
+ &host->requests_to_errorback);
+ break;
+ }
+}
+
+static void isci_request_process_stp_response(struct sas_task *task,
+ void *response_buffer)
+{
+ struct dev_to_host_fis *d2h_reg_fis = response_buffer;
+ struct task_status_struct *ts = &task->task_status;
+ struct ata_task_resp *resp = (void *)&ts->buf[0];
+
+ resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6));
+ memcpy(&resp->ending_fis[0], response_buffer + 16, 24);
+ ts->buf_valid_size = sizeof(*resp);
+
+ /**
+ * If the device fault bit is set in the status register, then
+ * set the sense data and return.
+ */
+ if (d2h_reg_fis->status & ATA_DF)
+ ts->stat = SAS_PROTO_RESPONSE;
+ else
+ ts->stat = SAM_STAT_GOOD;
+
+ ts->resp = SAS_TASK_COMPLETE;
+}
+
+static void isci_request_io_request_complete(struct isci_host *ihost,
+ struct isci_request *request,
+ enum sci_io_status completion_status)
+{
+ struct sas_task *task = isci_request_access_task(request);
+ struct ssp_response_iu *resp_iu;
+ void *resp_buf;
+ unsigned long task_flags;
+ struct isci_remote_device *idev = isci_lookup_device(task->dev);
+ enum service_response response = SAS_TASK_UNDELIVERED;
+ enum exec_status status = SAS_ABORTED_TASK;
+ enum isci_request_status request_status;
+ enum isci_completion_selection complete_to_host
+ = isci_perform_normal_io_completion;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: request = %p, task = %p,\n"
+ "task->data_dir = %d completion_status = 0x%x\n",
+ __func__,
+ request,
+ task,
+ task->data_dir,
+ completion_status);
+
+ spin_lock(&request->state_lock);
+ request_status = request->status;
+
+ /* Decode the request status. Note that if the request has been
+ * aborted by a task management function, we don't care
+ * what the status is.
+ */
+ switch (request_status) {
+
+ case aborted:
+ /* "aborted" indicates that the request was aborted by a task
+ * management function, since once a task management request is
+ * perfomed by the device, the request only completes because
+ * of the subsequent driver terminate.
+ *
+ * Aborted also means an external thread is explicitly managing
+ * this request, so that we do not complete it up the stack.
+ *
+ * The target is still there (since the TMF was successful).
+ */
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+ response = SAS_TASK_COMPLETE;
+
+ /* See if the device has been/is being stopped. Note
+ * that we ignore the quiesce state, since we are
+ * concerned about the actual device state.
+ */
+ if (!idev)
+ status = SAS_DEVICE_UNKNOWN;
+ else
+ status = SAS_ABORTED_TASK;
+
+ complete_to_host = isci_perform_aborted_io_completion;
+ /* This was an aborted request. */
+
+ spin_unlock(&request->state_lock);
+ break;
+
+ case aborting:
+ /* aborting means that the task management function tried and
+ * failed to abort the request. We need to note the request
+ * as SAS_TASK_UNDELIVERED, so that the scsi mid layer marks the
+ * target as down.
+ *
+ * Aborting also means an external thread is explicitly managing
+ * this request, so that we do not complete it up the stack.
+ */
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+ response = SAS_TASK_UNDELIVERED;
+
+ if (!idev)
+ /* The device has been /is being stopped. Note that
+ * we ignore the quiesce state, since we are
+ * concerned about the actual device state.
+ */
+ status = SAS_DEVICE_UNKNOWN;
+ else
+ status = SAS_PHY_DOWN;
+
+ complete_to_host = isci_perform_aborted_io_completion;
+
+ /* This was an aborted request. */
+
+ spin_unlock(&request->state_lock);
+ break;
+
+ case terminating:
+
+ /* This was an terminated request. This happens when
+ * the I/O is being terminated because of an action on
+ * the device (reset, tear down, etc.), and the I/O needs
+ * to be completed up the stack.
+ */
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+ response = SAS_TASK_UNDELIVERED;
+
+ /* See if the device has been/is being stopped. Note
+ * that we ignore the quiesce state, since we are
+ * concerned about the actual device state.
+ */
+ if (!idev)
+ status = SAS_DEVICE_UNKNOWN;
+ else
+ status = SAS_ABORTED_TASK;
+
+ complete_to_host = isci_perform_aborted_io_completion;
+
+ /* This was a terminated request. */
+
+ spin_unlock(&request->state_lock);
+ break;
+
+ case dead:
+ /* This was a terminated request that timed-out during the
+ * termination process. There is no task to complete to
+ * libsas.
+ */
+ complete_to_host = isci_perform_normal_io_completion;
+ spin_unlock(&request->state_lock);
+ break;
+
+ default:
+
+ /* The request is done from an SCU HW perspective. */
+ request->status = completed;
+
+ spin_unlock(&request->state_lock);
+
+ /* This is an active request being completed from the core. */
+ switch (completion_status) {
+
+ case SCI_IO_FAILURE_RESPONSE_VALID:
+ dev_dbg(&ihost->pdev->dev,
+ "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n",
+ __func__,
+ request,
+ task);
+
+ if (sas_protocol_ata(task->task_proto)) {
+ resp_buf = &request->stp.rsp;
+ isci_request_process_stp_response(task,
+ resp_buf);
+ } else if (SAS_PROTOCOL_SSP == task->task_proto) {
+
+ /* crack the iu response buffer. */
+ resp_iu = &request->ssp.rsp;
+ isci_request_process_response_iu(task, resp_iu,
+ &ihost->pdev->dev);
+
+ } else if (SAS_PROTOCOL_SMP == task->task_proto) {
+
+ dev_err(&ihost->pdev->dev,
+ "%s: SCI_IO_FAILURE_RESPONSE_VALID: "
+ "SAS_PROTOCOL_SMP protocol\n",
+ __func__);
+
+ } else
+ dev_err(&ihost->pdev->dev,
+ "%s: unknown protocol\n", __func__);
+
+ /* use the task status set in the task struct by the
+ * isci_request_process_response_iu call.
+ */
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+ response = task->task_status.resp;
+ status = task->task_status.stat;
+ break;
+
+ case SCI_IO_SUCCESS:
+ case SCI_IO_SUCCESS_IO_DONE_EARLY:
+
+ response = SAS_TASK_COMPLETE;
+ status = SAM_STAT_GOOD;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+
+ if (task->task_proto == SAS_PROTOCOL_SMP) {
+ void *rsp = &request->smp.rsp;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: SMP protocol completion\n",
+ __func__);
+
+ sg_copy_from_buffer(
+ &task->smp_task.smp_resp, 1,
+ rsp, sizeof(struct smp_resp));
+ } else if (completion_status
+ == SCI_IO_SUCCESS_IO_DONE_EARLY) {
+
+ /* This was an SSP / STP / SATA transfer.
+ * There is a possibility that less data than
+ * the maximum was transferred.
+ */
+ u32 transferred_length = sci_req_tx_bytes(request);
+
+ task->task_status.residual
+ = task->total_xfer_len - transferred_length;
+
+ /* If there were residual bytes, call this an
+ * underrun.
+ */
+ if (task->task_status.residual != 0)
+ status = SAS_DATA_UNDERRUN;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n",
+ __func__,
+ status);
+
+ } else
+ dev_dbg(&ihost->pdev->dev,
+ "%s: SCI_IO_SUCCESS\n",
+ __func__);
+
+ break;
+
+ case SCI_IO_FAILURE_TERMINATED:
+ dev_dbg(&ihost->pdev->dev,
+ "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n",
+ __func__,
+ request,
+ task);
+
+ /* The request was terminated explicitly. No handling
+ * is needed in the SCSI error handler path.
+ */
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+ response = SAS_TASK_UNDELIVERED;
+
+ /* See if the device has been/is being stopped. Note
+ * that we ignore the quiesce state, since we are
+ * concerned about the actual device state.
+ */
+ if (!idev)
+ status = SAS_DEVICE_UNKNOWN;
+ else
+ status = SAS_ABORTED_TASK;
+
+ complete_to_host = isci_perform_normal_io_completion;
+ break;
+
+ case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR:
+
+ isci_request_handle_controller_specific_errors(
+ idev, request, task, &response, &status,
+ &complete_to_host);
+
+ break;
+
+ case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED:
+ /* This is a special case, in that the I/O completion
+ * is telling us that the device needs a reset.
+ * In order for the device reset condition to be
+ * noticed, the I/O has to be handled in the error
+ * handler. Set the reset flag and cause the
+ * SCSI error thread to be scheduled.
+ */
+ spin_lock_irqsave(&task->task_state_lock, task_flags);
+ task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
+ spin_unlock_irqrestore(&task->task_state_lock, task_flags);
+
+ /* Fail the I/O. */
+ response = SAS_TASK_UNDELIVERED;
+ status = SAM_STAT_TASK_ABORTED;
+
+ complete_to_host = isci_perform_error_io_completion;
+ clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+ break;
+
+ case SCI_FAILURE_RETRY_REQUIRED:
+
+ /* Fail the I/O so it can be retried. */
+ response = SAS_TASK_UNDELIVERED;
+ if (!idev)
+ status = SAS_DEVICE_UNKNOWN;
+ else
+ status = SAS_ABORTED_TASK;
+
+ complete_to_host = isci_perform_normal_io_completion;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+ break;
+
+
+ default:
+ /* Catch any otherwise unhandled error codes here. */
+ dev_dbg(&ihost->pdev->dev,
+ "%s: invalid completion code: 0x%x - "
+ "isci_request = %p\n",
+ __func__, completion_status, request);
+
+ response = SAS_TASK_UNDELIVERED;
+
+ /* See if the device has been/is being stopped. Note
+ * that we ignore the quiesce state, since we are
+ * concerned about the actual device state.
+ */
+ if (!idev)
+ status = SAS_DEVICE_UNKNOWN;
+ else
+ status = SAS_ABORTED_TASK;
+
+ if (SAS_PROTOCOL_SMP == task->task_proto) {
+ set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+ complete_to_host = isci_perform_normal_io_completion;
+ } else {
+ clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags);
+ complete_to_host = isci_perform_error_io_completion;
+ }
+ break;
+ }
+ break;
+ }
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ if (task->data_dir == DMA_NONE)
+ break;
+ if (task->num_scatter == 0)
+ /* 0 indicates a single dma address */
+ dma_unmap_single(&ihost->pdev->dev,
+ request->zero_scatter_daddr,
+ task->total_xfer_len, task->data_dir);
+ else /* unmap the sgl dma addresses */
+ dma_unmap_sg(&ihost->pdev->dev, task->scatter,
+ request->num_sg_entries, task->data_dir);
+ break;
+ case SAS_PROTOCOL_SMP: {
+ struct scatterlist *sg = &task->smp_task.smp_req;
+ struct smp_req *smp_req;
+ void *kaddr;
+
+ dma_unmap_sg(&ihost->pdev->dev, sg, 1, DMA_TO_DEVICE);
+
+ /* need to swab it back in case the command buffer is re-used */
+ kaddr = kmap_atomic(sg_page(sg), KM_IRQ0);
+ smp_req = kaddr + sg->offset;
+ sci_swab32_cpy(smp_req, smp_req, sg->length / sizeof(u32));
+ kunmap_atomic(kaddr, KM_IRQ0);
+ break;
+ }
+ default:
+ break;
+ }
+
+ /* Put the completed request on the correct list */
+ isci_task_save_for_upper_layer_completion(ihost, request, response,
+ status, complete_to_host
+ );
+
+ /* complete the io request to the core. */
+ sci_controller_complete_io(ihost, request->target_device, request);
+ isci_put_device(idev);
+
+ /* set terminated handle so it cannot be completed or
+ * terminated again, and to cause any calls into abort
+ * task to recognize the already completed case.
+ */
+ set_bit(IREQ_TERMINATED, &request->flags);
+}
+
+static void sci_request_started_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_request *ireq = container_of(sm, typeof(*ireq), sm);
+ struct domain_device *dev = ireq->target_device->domain_dev;
+ struct sas_task *task;
+
+ /* XXX as hch said always creating an internal sas_task for tmf
+ * requests would simplify the driver
+ */
+ task = ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL;
+
+ /* all unaccelerated request types (non ssp or ncq) handled with
+ * substates
+ */
+ if (!task && dev->dev_type == SAS_END_DEV) {
+ sci_change_state(sm, SCI_REQ_TASK_WAIT_TC_COMP);
+ } else if (!task &&
+ (isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_high ||
+ isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_low)) {
+ sci_change_state(sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED);
+ } else if (task && task->task_proto == SAS_PROTOCOL_SMP) {
+ sci_change_state(sm, SCI_REQ_SMP_WAIT_RESP);
+ } else if (task && sas_protocol_ata(task->task_proto) &&
+ !task->ata_task.use_ncq) {
+ u32 state;
+
+ if (task->data_dir == DMA_NONE)
+ state = SCI_REQ_STP_NON_DATA_WAIT_H2D;
+ else if (task->ata_task.dma_xfer)
+ state = SCI_REQ_STP_UDMA_WAIT_TC_COMP;
+ else /* PIO */
+ state = SCI_REQ_STP_PIO_WAIT_H2D;
+
+ sci_change_state(sm, state);
+ }
+}
+
+static void sci_request_completed_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_request *ireq = container_of(sm, typeof(*ireq), sm);
+ struct isci_host *ihost = ireq->owning_controller;
+
+ /* Tell the SCI_USER that the IO request is complete */
+ if (!test_bit(IREQ_TMF, &ireq->flags))
+ isci_request_io_request_complete(ihost, ireq,
+ ireq->sci_status);
+ else
+ isci_task_request_complete(ihost, ireq, ireq->sci_status);
+}
+
+static void sci_request_aborting_state_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_request *ireq = container_of(sm, typeof(*ireq), sm);
+
+ /* Setting the abort bit in the Task Context is required by the silicon. */
+ ireq->tc->abort = 1;
+}
+
+static void sci_stp_request_started_non_data_await_h2d_completion_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_request *ireq = container_of(sm, typeof(*ireq), sm);
+
+ ireq->target_device->working_request = ireq;
+}
+
+static void sci_stp_request_started_pio_await_h2d_completion_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_request *ireq = container_of(sm, typeof(*ireq), sm);
+
+ ireq->target_device->working_request = ireq;
+}
+
+static void sci_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_request *ireq = container_of(sm, typeof(*ireq), sm);
+
+ ireq->target_device->working_request = ireq;
+}
+
+static void sci_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm)
+{
+ struct isci_request *ireq = container_of(sm, typeof(*ireq), sm);
+ struct scu_task_context *tc = ireq->tc;
+ struct host_to_dev_fis *h2d_fis;
+ enum sci_status status;
+
+ /* Clear the SRST bit */
+ h2d_fis = &ireq->stp.cmd;
+ h2d_fis->control = 0;
+
+ /* Clear the TC control bit */
+ tc->control_frame = 0;
+
+ status = sci_controller_continue_io(ireq);
+ WARN_ONCE(status != SCI_SUCCESS, "isci: continue io failure\n");
+}
+
+static const struct sci_base_state sci_request_state_table[] = {
+ [SCI_REQ_INIT] = { },
+ [SCI_REQ_CONSTRUCTED] = { },
+ [SCI_REQ_STARTED] = {
+ .enter_state = sci_request_started_state_enter,
+ },
+ [SCI_REQ_STP_NON_DATA_WAIT_H2D] = {
+ .enter_state = sci_stp_request_started_non_data_await_h2d_completion_enter,
+ },
+ [SCI_REQ_STP_NON_DATA_WAIT_D2H] = { },
+ [SCI_REQ_STP_PIO_WAIT_H2D] = {
+ .enter_state = sci_stp_request_started_pio_await_h2d_completion_enter,
+ },
+ [SCI_REQ_STP_PIO_WAIT_FRAME] = { },
+ [SCI_REQ_STP_PIO_DATA_IN] = { },
+ [SCI_REQ_STP_PIO_DATA_OUT] = { },
+ [SCI_REQ_STP_UDMA_WAIT_TC_COMP] = { },
+ [SCI_REQ_STP_UDMA_WAIT_D2H] = { },
+ [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED] = {
+ .enter_state = sci_stp_request_started_soft_reset_await_h2d_asserted_completion_enter,
+ },
+ [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG] = {
+ .enter_state = sci_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter,
+ },
+ [SCI_REQ_STP_SOFT_RESET_WAIT_D2H] = { },
+ [SCI_REQ_TASK_WAIT_TC_COMP] = { },
+ [SCI_REQ_TASK_WAIT_TC_RESP] = { },
+ [SCI_REQ_SMP_WAIT_RESP] = { },
+ [SCI_REQ_SMP_WAIT_TC_COMP] = { },
+ [SCI_REQ_COMPLETED] = {
+ .enter_state = sci_request_completed_state_enter,
+ },
+ [SCI_REQ_ABORTING] = {
+ .enter_state = sci_request_aborting_state_enter,
+ },
+ [SCI_REQ_FINAL] = { },
+};
+
+static void
+sci_general_request_construct(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ sci_init_sm(&ireq->sm, sci_request_state_table, SCI_REQ_INIT);
+
+ ireq->target_device = idev;
+ ireq->protocol = SCIC_NO_PROTOCOL;
+ ireq->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX;
+
+ ireq->sci_status = SCI_SUCCESS;
+ ireq->scu_status = 0;
+ ireq->post_context = 0xFFFFFFFF;
+}
+
+static enum sci_status
+sci_io_request_construct(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq)
+{
+ struct domain_device *dev = idev->domain_dev;
+ enum sci_status status = SCI_SUCCESS;
+
+ /* Build the common part of the request */
+ sci_general_request_construct(ihost, idev, ireq);
+
+ if (idev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX)
+ return SCI_FAILURE_INVALID_REMOTE_DEVICE;
+
+ if (dev->dev_type == SAS_END_DEV)
+ /* pass */;
+ else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))
+ memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd));
+ else if (dev_is_expander(dev))
+ /* pass */;
+ else
+ return SCI_FAILURE_UNSUPPORTED_PROTOCOL;
+
+ memset(ireq->tc, 0, offsetof(struct scu_task_context, sgl_pair_ab));
+
+ return status;
+}
+
+enum sci_status sci_task_request_construct(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ u16 io_tag, struct isci_request *ireq)
+{
+ struct domain_device *dev = idev->domain_dev;
+ enum sci_status status = SCI_SUCCESS;
+
+ /* Build the common part of the request */
+ sci_general_request_construct(ihost, idev, ireq);
+
+ if (dev->dev_type == SAS_END_DEV ||
+ dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
+ set_bit(IREQ_TMF, &ireq->flags);
+ memset(ireq->tc, 0, sizeof(struct scu_task_context));
+ } else
+ status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;
+
+ return status;
+}
+
+static enum sci_status isci_request_ssp_request_construct(
+ struct isci_request *request)
+{
+ enum sci_status status;
+
+ dev_dbg(&request->isci_host->pdev->dev,
+ "%s: request = %p\n",
+ __func__,
+ request);
+ status = sci_io_request_construct_basic_ssp(request);
+ return status;
+}
+
+static enum sci_status isci_request_stp_request_construct(struct isci_request *ireq)
+{
+ struct sas_task *task = isci_request_access_task(ireq);
+ struct host_to_dev_fis *fis = &ireq->stp.cmd;
+ struct ata_queued_cmd *qc = task->uldd_task;
+ enum sci_status status;
+
+ dev_dbg(&ireq->isci_host->pdev->dev,
+ "%s: ireq = %p\n",
+ __func__,
+ ireq);
+
+ memcpy(fis, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
+ if (!task->ata_task.device_control_reg_update)
+ fis->flags |= 0x80;
+ fis->flags &= 0xF0;
+
+ status = sci_io_request_construct_basic_sata(ireq);
+
+ if (qc && (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+ qc->tf.command == ATA_CMD_FPDMA_READ)) {
+ fis->sector_count = qc->tag << 3;
+ ireq->tc->type.stp.ncq_tag = qc->tag;
+ }
+
+ return status;
+}
+
+static enum sci_status
+sci_io_request_construct_smp(struct device *dev,
+ struct isci_request *ireq,
+ struct sas_task *task)
+{
+ struct scatterlist *sg = &task->smp_task.smp_req;
+ struct isci_remote_device *idev;
+ struct scu_task_context *task_context;
+ struct isci_port *iport;
+ struct smp_req *smp_req;
+ void *kaddr;
+ u8 req_len;
+ u32 cmd;
+
+ kaddr = kmap_atomic(sg_page(sg), KM_IRQ0);
+ smp_req = kaddr + sg->offset;
+ /*
+ * Look at the SMP requests' header fields; for certain SAS 1.x SMP
+ * functions under SAS 2.0, a zero request length really indicates
+ * a non-zero default length.
+ */
+ if (smp_req->req_len == 0) {
+ switch (smp_req->func) {
+ case SMP_DISCOVER:
+ case SMP_REPORT_PHY_ERR_LOG:
+ case SMP_REPORT_PHY_SATA:
+ case SMP_REPORT_ROUTE_INFO:
+ smp_req->req_len = 2;
+ break;
+ case SMP_CONF_ROUTE_INFO:
+ case SMP_PHY_CONTROL:
+ case SMP_PHY_TEST_FUNCTION:
+ smp_req->req_len = 9;
+ break;
+ /* Default - zero is a valid default for 2.0. */
+ }
+ }
+ req_len = smp_req->req_len;
+ sci_swab32_cpy(smp_req, smp_req, sg->length / sizeof(u32));
+ cmd = *(u32 *) smp_req;
+ kunmap_atomic(kaddr, KM_IRQ0);
+
+ if (!dma_map_sg(dev, sg, 1, DMA_TO_DEVICE))
+ return SCI_FAILURE;
+
+ ireq->protocol = SCIC_SMP_PROTOCOL;
+
+ /* byte swap the smp request. */
+
+ task_context = ireq->tc;
+
+ idev = ireq->target_device;
+ iport = idev->owning_port;
+
+ /*
+ * Fill in the TC with the its required data
+ * 00h
+ */
+ task_context->priority = 0;
+ task_context->initiator_request = 1;
+ task_context->connection_rate = idev->connection_rate;
+ task_context->protocol_engine_index = ISCI_PEG;
+ task_context->logical_port_index = iport->physical_port_index;
+ task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP;
+ task_context->abort = 0;
+ task_context->valid = SCU_TASK_CONTEXT_VALID;
+ task_context->context_type = SCU_TASK_CONTEXT_TYPE;
+
+ /* 04h */
+ task_context->remote_node_index = idev->rnc.remote_node_index;
+ task_context->command_code = 0;
+ task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST;
+
+ /* 08h */
+ task_context->link_layer_control = 0;
+ task_context->do_not_dma_ssp_good_response = 1;
+ task_context->strict_ordering = 0;
+ task_context->control_frame = 1;
+ task_context->timeout_enable = 0;
+ task_context->block_guard_enable = 0;
+
+ /* 0ch */
+ task_context->address_modifier = 0;
+
+ /* 10h */
+ task_context->ssp_command_iu_length = req_len;
+
+ /* 14h */
+ task_context->transfer_length_bytes = 0;
+
+ /*
+ * 18h ~ 30h, protocol specific
+ * since commandIU has been build by framework at this point, we just
+ * copy the frist DWord from command IU to this location. */
+ memcpy(&task_context->type.smp, &cmd, sizeof(u32));
+
+ /*
+ * 40h
+ * "For SMP you could program it to zero. We would prefer that way
+ * so that done code will be consistent." - Venki
+ */
+ task_context->task_phase = 0;
+
+ ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
+ (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) |
+ (iport->physical_port_index <<
+ SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) |
+ ISCI_TAG_TCI(ireq->io_tag));
+ /*
+ * Copy the physical address for the command buffer to the SCU Task
+ * Context command buffer should not contain command header.
+ */
+ task_context->command_iu_upper = upper_32_bits(sg_dma_address(sg));
+ task_context->command_iu_lower = lower_32_bits(sg_dma_address(sg) + sizeof(u32));
+
+ /* SMP response comes as UF, so no need to set response IU address. */
+ task_context->response_iu_upper = 0;
+ task_context->response_iu_lower = 0;
+
+ sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED);
+
+ return SCI_SUCCESS;
+}
+
+/*
+ * isci_smp_request_build() - This function builds the smp request.
+ * @ireq: This parameter points to the isci_request allocated in the
+ * request construct function.
+ *
+ * SCI_SUCCESS on successfull completion, or specific failure code.
+ */
+static enum sci_status isci_smp_request_build(struct isci_request *ireq)
+{
+ struct sas_task *task = isci_request_access_task(ireq);
+ struct device *dev = &ireq->isci_host->pdev->dev;
+ enum sci_status status = SCI_FAILURE;
+
+ status = sci_io_request_construct_smp(dev, ireq, task);
+ if (status != SCI_SUCCESS)
+ dev_dbg(&ireq->isci_host->pdev->dev,
+ "%s: failed with status = %d\n",
+ __func__,
+ status);
+
+ return status;
+}
+
+/**
+ * isci_io_request_build() - This function builds the io request object.
+ * @ihost: This parameter specifies the ISCI host object
+ * @request: This parameter points to the isci_request object allocated in the
+ * request construct function.
+ * @sci_device: This parameter is the handle for the sci core's remote device
+ * object that is the destination for this request.
+ *
+ * SCI_SUCCESS on successfull completion, or specific failure code.
+ */
+static enum sci_status isci_io_request_build(struct isci_host *ihost,
+ struct isci_request *request,
+ struct isci_remote_device *idev)
+{
+ enum sci_status status = SCI_SUCCESS;
+ struct sas_task *task = isci_request_access_task(request);
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: idev = 0x%p; request = %p, "
+ "num_scatter = %d\n",
+ __func__,
+ idev,
+ request,
+ task->num_scatter);
+
+ /* map the sgl addresses, if present.
+ * libata does the mapping for sata devices
+ * before we get the request.
+ */
+ if (task->num_scatter &&
+ !sas_protocol_ata(task->task_proto) &&
+ !(SAS_PROTOCOL_SMP & task->task_proto)) {
+
+ request->num_sg_entries = dma_map_sg(
+ &ihost->pdev->dev,
+ task->scatter,
+ task->num_scatter,
+ task->data_dir
+ );
+
+ if (request->num_sg_entries == 0)
+ return SCI_FAILURE_INSUFFICIENT_RESOURCES;
+ }
+
+ status = sci_io_request_construct(ihost, idev, request);
+
+ if (status != SCI_SUCCESS) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: failed request construct\n",
+ __func__);
+ return SCI_FAILURE;
+ }
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ status = isci_smp_request_build(request);
+ break;
+ case SAS_PROTOCOL_SSP:
+ status = isci_request_ssp_request_construct(request);
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ status = isci_request_stp_request_construct(request);
+ break;
+ default:
+ dev_dbg(&ihost->pdev->dev,
+ "%s: unknown protocol\n", __func__);
+ return SCI_FAILURE;
+ }
+
+ return SCI_SUCCESS;
+}
+
+static struct isci_request *isci_request_from_tag(struct isci_host *ihost, u16 tag)
+{
+ struct isci_request *ireq;
+
+ ireq = ihost->reqs[ISCI_TAG_TCI(tag)];
+ ireq->io_tag = tag;
+ ireq->io_request_completion = NULL;
+ ireq->flags = 0;
+ ireq->num_sg_entries = 0;
+ INIT_LIST_HEAD(&ireq->completed_node);
+ INIT_LIST_HEAD(&ireq->dev_node);
+ isci_request_change_state(ireq, allocated);
+
+ return ireq;
+}
+
+static struct isci_request *isci_io_request_from_tag(struct isci_host *ihost,
+ struct sas_task *task,
+ u16 tag)
+{
+ struct isci_request *ireq;
+
+ ireq = isci_request_from_tag(ihost, tag);
+ ireq->ttype_ptr.io_task_ptr = task;
+ ireq->ttype = io_task;
+ task->lldd_task = ireq;
+
+ return ireq;
+}
+
+struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost,
+ struct isci_tmf *isci_tmf,
+ u16 tag)
+{
+ struct isci_request *ireq;
+
+ ireq = isci_request_from_tag(ihost, tag);
+ ireq->ttype_ptr.tmf_task_ptr = isci_tmf;
+ ireq->ttype = tmf_task;
+
+ return ireq;
+}
+
+int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev,
+ struct sas_task *task, u16 tag)
+{
+ enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;
+ struct isci_request *ireq;
+ unsigned long flags;
+ int ret = 0;
+
+ /* do common allocation and init of request object. */
+ ireq = isci_io_request_from_tag(ihost, task, tag);
+
+ status = isci_io_request_build(ihost, ireq, idev);
+ if (status != SCI_SUCCESS) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: request_construct failed - status = 0x%x\n",
+ __func__,
+ status);
+ return status;
+ }
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (test_bit(IDEV_IO_NCQERROR, &idev->flags)) {
+
+ if (isci_task_is_ncq_recovery(task)) {
+
+ /* The device is in an NCQ recovery state. Issue the
+ * request on the task side. Note that it will
+ * complete on the I/O request side because the
+ * request was built that way (ie.
+ * ireq->is_task_management_request is false).
+ */
+ status = sci_controller_start_task(ihost,
+ idev,
+ ireq);
+ } else {
+ status = SCI_FAILURE;
+ }
+ } else {
+ /* send the request, let the core assign the IO TAG. */
+ status = sci_controller_start_io(ihost, idev,
+ ireq);
+ }
+
+ if (status != SCI_SUCCESS &&
+ status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: failed request start (0x%x)\n",
+ __func__, status);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ return status;
+ }
+
+ /* Either I/O started OK, or the core has signaled that
+ * the device needs a target reset.
+ *
+ * In either case, hold onto the I/O for later.
+ *
+ * Update it's status and add it to the list in the
+ * remote device object.
+ */
+ list_add(&ireq->dev_node, &idev->reqs_in_process);
+
+ if (status == SCI_SUCCESS) {
+ isci_request_change_state(ireq, started);
+ } else {
+ /* The request did not really start in the
+ * hardware, so clear the request handle
+ * here so no terminations will be done.
+ */
+ set_bit(IREQ_TERMINATED, &ireq->flags);
+ isci_request_change_state(ireq, completed);
+ }
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ if (status ==
+ SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) {
+ /* Signal libsas that we need the SCSI error
+ * handler thread to work on this I/O and that
+ * we want a device reset.
+ */
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ /* Cause this task to be scheduled in the SCSI error
+ * handler thread.
+ */
+ isci_execpath_callback(ihost, task,
+ sas_task_abort);
+
+ /* Change the status, since we are holding
+ * the I/O until it is managed by the SCSI
+ * error handler.
+ */
+ status = SCI_SUCCESS;
+ }
+
+ return ret;
+}
diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h
new file mode 100644
index 0000000..7a1d5a9
--- /dev/null
+++ b/drivers/scsi/isci/request.h
@@ -0,0 +1,448 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ISCI_REQUEST_H_
+#define _ISCI_REQUEST_H_
+
+#include "isci.h"
+#include "host.h"
+#include "scu_task_context.h"
+
+/**
+ * struct isci_request_status - This enum defines the possible states of an I/O
+ * request.
+ *
+ *
+ */
+enum isci_request_status {
+ unallocated = 0x00,
+ allocated = 0x01,
+ started = 0x02,
+ completed = 0x03,
+ aborting = 0x04,
+ aborted = 0x05,
+ terminating = 0x06,
+ dead = 0x07
+};
+
+enum task_type {
+ io_task = 0,
+ tmf_task = 1
+};
+
+enum sci_request_protocol {
+ SCIC_NO_PROTOCOL,
+ SCIC_SMP_PROTOCOL,
+ SCIC_SSP_PROTOCOL,
+ SCIC_STP_PROTOCOL
+}; /* XXX remove me, use sas_task.{dev|task_proto} instead */;
+
+/**
+ * isci_stp_request - extra request infrastructure to handle pio/atapi protocol
+ * @pio_len - number of bytes requested at PIO setup
+ * @status - pio setup ending status value to tell us if we need
+ * to wait for another fis or if the transfer is complete. Upon
+ * receipt of a d2h fis this will be the status field of that fis.
+ * @sgl - track pio transfer progress as we iterate through the sgl
+ * @device_cdb_len - atapi device advertises it's transfer constraints at setup
+ */
+struct isci_stp_request {
+ u32 pio_len;
+ u8 status;
+
+ struct isci_stp_pio_sgl {
+ int index;
+ u8 set;
+ u32 offset;
+ } sgl;
+ u32 device_cdb_len;
+};
+
+struct isci_request {
+ enum isci_request_status status;
+ #define IREQ_COMPLETE_IN_TARGET 0
+ #define IREQ_TERMINATED 1
+ #define IREQ_TMF 2
+ #define IREQ_ACTIVE 3
+ unsigned long flags;
+ /* XXX kill ttype and ttype_ptr, allocate full sas_task */
+ enum task_type ttype;
+ union ttype_ptr_union {
+ struct sas_task *io_task_ptr; /* When ttype==io_task */
+ struct isci_tmf *tmf_task_ptr; /* When ttype==tmf_task */
+ } ttype_ptr;
+ struct isci_host *isci_host;
+ /* For use in the requests_to_{complete|abort} lists: */
+ struct list_head completed_node;
+ /* For use in the reqs_in_process list: */
+ struct list_head dev_node;
+ spinlock_t state_lock;
+ dma_addr_t request_daddr;
+ dma_addr_t zero_scatter_daddr;
+ unsigned int num_sg_entries;
+ /* Note: "io_request_completion" is completed in two different ways
+ * depending on whether this is a TMF or regular request.
+ * - TMF requests are completed in the thread that started them;
+ * - regular requests are completed in the request completion callback
+ * function.
+ * This difference in operation allows the aborter of a TMF request
+ * to be sure that once the TMF request completes, the I/O that the
+ * TMF was aborting is guaranteed to have completed.
+ *
+ * XXX kill io_request_completion
+ */
+ struct completion *io_request_completion;
+ struct sci_base_state_machine sm;
+ struct isci_host *owning_controller;
+ struct isci_remote_device *target_device;
+ u16 io_tag;
+ enum sci_request_protocol protocol;
+ u32 scu_status; /* hardware result */
+ u32 sci_status; /* upper layer disposition */
+ u32 post_context;
+ struct scu_task_context *tc;
+ /* could be larger with sg chaining */
+ #define SCU_SGL_SIZE ((SCI_MAX_SCATTER_GATHER_ELEMENTS + 1) / 2)
+ struct scu_sgl_element_pair sg_table[SCU_SGL_SIZE] __attribute__ ((aligned(32)));
+ /* This field is a pointer to the stored rx frame data. It is used in
+ * STP internal requests and SMP response frames. If this field is
+ * non-NULL the saved frame must be released on IO request completion.
+ */
+ u32 saved_rx_frame_index;
+
+ union {
+ struct {
+ union {
+ struct ssp_cmd_iu cmd;
+ struct ssp_task_iu tmf;
+ };
+ union {
+ struct ssp_response_iu rsp;
+ u8 rsp_buf[SSP_RESP_IU_MAX_SIZE];
+ };
+ } ssp;
+ struct {
+ struct smp_resp rsp;
+ } smp;
+ struct {
+ struct isci_stp_request req;
+ struct host_to_dev_fis cmd;
+ struct dev_to_host_fis rsp;
+ } stp;
+ };
+};
+
+static inline struct isci_request *to_ireq(struct isci_stp_request *stp_req)
+{
+ struct isci_request *ireq;
+
+ ireq = container_of(stp_req, typeof(*ireq), stp.req);
+ return ireq;
+}
+
+/**
+ * enum sci_base_request_states - This enumeration depicts all the states for
+ * the common request state machine.
+ *
+ *
+ */
+enum sci_base_request_states {
+ /*
+ * Simply the initial state for the base request state machine.
+ */
+ SCI_REQ_INIT,
+
+ /*
+ * This state indicates that the request has been constructed.
+ * This state is entered from the INITIAL state.
+ */
+ SCI_REQ_CONSTRUCTED,
+
+ /*
+ * This state indicates that the request has been started. This state
+ * is entered from the CONSTRUCTED state.
+ */
+ SCI_REQ_STARTED,
+
+ SCI_REQ_STP_UDMA_WAIT_TC_COMP,
+ SCI_REQ_STP_UDMA_WAIT_D2H,
+
+ SCI_REQ_STP_NON_DATA_WAIT_H2D,
+ SCI_REQ_STP_NON_DATA_WAIT_D2H,
+
+ SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED,
+ SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG,
+ SCI_REQ_STP_SOFT_RESET_WAIT_D2H,
+
+ /*
+ * While in this state the IO request object is waiting for the TC
+ * completion notification for the H2D Register FIS
+ */
+ SCI_REQ_STP_PIO_WAIT_H2D,
+
+ /*
+ * While in this state the IO request object is waiting for either a
+ * PIO Setup FIS or a D2H register FIS. The type of frame received is
+ * based on the result of the prior frame and line conditions.
+ */
+ SCI_REQ_STP_PIO_WAIT_FRAME,
+
+ /*
+ * While in this state the IO request object is waiting for a DATA
+ * frame from the device.
+ */
+ SCI_REQ_STP_PIO_DATA_IN,
+
+ /*
+ * While in this state the IO request object is waiting to transmit
+ * the next data frame to the device.
+ */
+ SCI_REQ_STP_PIO_DATA_OUT,
+
+ /*
+ * The AWAIT_TC_COMPLETION sub-state indicates that the started raw
+ * task management request is waiting for the transmission of the
+ * initial frame (i.e. command, task, etc.).
+ */
+ SCI_REQ_TASK_WAIT_TC_COMP,
+
+ /*
+ * This sub-state indicates that the started task management request
+ * is waiting for the reception of an unsolicited frame
+ * (i.e. response IU).
+ */
+ SCI_REQ_TASK_WAIT_TC_RESP,
+
+ /*
+ * This sub-state indicates that the started task management request
+ * is waiting for the reception of an unsolicited frame
+ * (i.e. response IU).
+ */
+ SCI_REQ_SMP_WAIT_RESP,
+
+ /*
+ * The AWAIT_TC_COMPLETION sub-state indicates that the started SMP
+ * request is waiting for the transmission of the initial frame
+ * (i.e. command, task, etc.).
+ */
+ SCI_REQ_SMP_WAIT_TC_COMP,
+
+ /*
+ * This state indicates that the request has completed.
+ * This state is entered from the STARTED state. This state is entered
+ * from the ABORTING state.
+ */
+ SCI_REQ_COMPLETED,
+
+ /*
+ * This state indicates that the request is in the process of being
+ * terminated/aborted.
+ * This state is entered from the CONSTRUCTED state.
+ * This state is entered from the STARTED state.
+ */
+ SCI_REQ_ABORTING,
+
+ /*
+ * Simply the final state for the base request state machine.
+ */
+ SCI_REQ_FINAL,
+};
+
+enum sci_status sci_request_start(struct isci_request *ireq);
+enum sci_status sci_io_request_terminate(struct isci_request *ireq);
+enum sci_status
+sci_io_request_event_handler(struct isci_request *ireq,
+ u32 event_code);
+enum sci_status
+sci_io_request_frame_handler(struct isci_request *ireq,
+ u32 frame_index);
+enum sci_status
+sci_task_request_terminate(struct isci_request *ireq);
+extern enum sci_status
+sci_request_complete(struct isci_request *ireq);
+extern enum sci_status
+sci_io_request_tc_completion(struct isci_request *ireq, u32 code);
+
+/* XXX open code in caller */
+static inline dma_addr_t
+sci_io_request_get_dma_addr(struct isci_request *ireq, void *virt_addr)
+{
+
+ char *requested_addr = (char *)virt_addr;
+ char *base_addr = (char *)ireq;
+
+ BUG_ON(requested_addr < base_addr);
+ BUG_ON((requested_addr - base_addr) >= sizeof(*ireq));
+
+ return ireq->request_daddr + (requested_addr - base_addr);
+}
+
+/**
+ * isci_request_change_state() - This function sets the status of the request
+ * object.
+ * @request: This parameter points to the isci_request object
+ * @status: This Parameter is the new status of the object
+ *
+ */
+static inline enum isci_request_status
+isci_request_change_state(struct isci_request *isci_request,
+ enum isci_request_status status)
+{
+ enum isci_request_status old_state;
+ unsigned long flags;
+
+ dev_dbg(&isci_request->isci_host->pdev->dev,
+ "%s: isci_request = %p, state = 0x%x\n",
+ __func__,
+ isci_request,
+ status);
+
+ BUG_ON(isci_request == NULL);
+
+ spin_lock_irqsave(&isci_request->state_lock, flags);
+ old_state = isci_request->status;
+ isci_request->status = status;
+ spin_unlock_irqrestore(&isci_request->state_lock, flags);
+
+ return old_state;
+}
+
+/**
+ * isci_request_change_started_to_newstate() - This function sets the status of
+ * the request object.
+ * @request: This parameter points to the isci_request object
+ * @status: This Parameter is the new status of the object
+ *
+ * state previous to any change.
+ */
+static inline enum isci_request_status
+isci_request_change_started_to_newstate(struct isci_request *isci_request,
+ struct completion *completion_ptr,
+ enum isci_request_status newstate)
+{
+ enum isci_request_status old_state;
+ unsigned long flags;
+
+ spin_lock_irqsave(&isci_request->state_lock, flags);
+
+ old_state = isci_request->status;
+
+ if (old_state == started || old_state == aborting) {
+ BUG_ON(isci_request->io_request_completion != NULL);
+
+ isci_request->io_request_completion = completion_ptr;
+ isci_request->status = newstate;
+ }
+
+ spin_unlock_irqrestore(&isci_request->state_lock, flags);
+
+ dev_dbg(&isci_request->isci_host->pdev->dev,
+ "%s: isci_request = %p, old_state = 0x%x\n",
+ __func__,
+ isci_request,
+ old_state);
+
+ return old_state;
+}
+
+/**
+ * isci_request_change_started_to_aborted() - This function sets the status of
+ * the request object.
+ * @request: This parameter points to the isci_request object
+ * @completion_ptr: This parameter is saved as the kernel completion structure
+ * signalled when the old request completes.
+ *
+ * state previous to any change.
+ */
+static inline enum isci_request_status
+isci_request_change_started_to_aborted(struct isci_request *isci_request,
+ struct completion *completion_ptr)
+{
+ return isci_request_change_started_to_newstate(isci_request,
+ completion_ptr,
+ aborted);
+}
+
+#define isci_request_access_task(req) ((req)->ttype_ptr.io_task_ptr)
+
+#define isci_request_access_tmf(req) ((req)->ttype_ptr.tmf_task_ptr)
+
+struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost,
+ struct isci_tmf *isci_tmf,
+ u16 tag);
+int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev,
+ struct sas_task *task, u16 tag);
+void isci_terminate_pending_requests(struct isci_host *ihost,
+ struct isci_remote_device *idev);
+enum sci_status
+sci_task_request_construct(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ u16 io_tag,
+ struct isci_request *ireq);
+enum sci_status
+sci_task_request_construct_ssp(struct isci_request *ireq);
+enum sci_status
+sci_task_request_construct_sata(struct isci_request *ireq);
+void sci_smp_request_copy_response(struct isci_request *ireq);
+
+static inline int isci_task_is_ncq_recovery(struct sas_task *task)
+{
+ return (sas_protocol_ata(task->task_proto) &&
+ task->ata_task.fis.command == ATA_CMD_READ_LOG_EXT &&
+ task->ata_task.fis.lbal == ATA_LOG_SATA_NCQ);
+
+}
+
+#endif /* !defined(_ISCI_REQUEST_H_) */
diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h
new file mode 100644
index 0000000..462b151
--- /dev/null
+++ b/drivers/scsi/isci/sas.h
@@ -0,0 +1,219 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SCI_SAS_H_
+#define _SCI_SAS_H_
+
+#include <linux/kernel.h>
+
+/*
+ * SATA FIS Types These constants depict the various SATA FIS types devined in
+ * the serial ATA specification.
+ * XXX: This needs to go into <scsi/sas.h>
+ */
+#define FIS_REGH2D 0x27
+#define FIS_REGD2H 0x34
+#define FIS_SETDEVBITS 0xA1
+#define FIS_DMA_ACTIVATE 0x39
+#define FIS_DMA_SETUP 0x41
+#define FIS_BIST_ACTIVATE 0x58
+#define FIS_PIO_SETUP 0x5F
+#define FIS_DATA 0x46
+
+/**************************************************************************/
+#define SSP_RESP_IU_MAX_SIZE 280
+
+/*
+ * contents of the SSP COMMAND INFORMATION UNIT.
+ * For specific information on each of these individual fields please
+ * reference the SAS specification SSP transport layer section.
+ * XXX: This needs to go into <scsi/sas.h>
+ */
+struct ssp_cmd_iu {
+ u8 LUN[8];
+ u8 add_cdb_len:6;
+ u8 _r_a:2;
+ u8 _r_b;
+ u8 en_fburst:1;
+ u8 task_prio:4;
+ u8 task_attr:3;
+ u8 _r_c;
+
+ u8 cdb[16];
+} __packed;
+
+/*
+ * contents of the SSP TASK INFORMATION UNIT.
+ * For specific information on each of these individual fields please
+ * reference the SAS specification SSP transport layer section.
+ * XXX: This needs to go into <scsi/sas.h>
+ */
+struct ssp_task_iu {
+ u8 LUN[8];
+ u8 _r_a;
+ u8 task_func;
+ u8 _r_b[4];
+ u16 task_tag;
+ u8 _r_c[12];
+} __packed;
+
+
+/*
+ * struct smp_req_phy_id - This structure defines the contents of
+ * an SMP Request that is comprised of the struct smp_request_header and a
+ * phy identifier.
+ * Examples: SMP_REQUEST_DISCOVER, SMP_REQUEST_REPORT_PHY_SATA.
+ *
+ * For specific information on each of these individual fields please reference
+ * the SAS specification.
+ */
+struct smp_req_phy_id {
+ u8 _r_a[4]; /* bytes 4-7 */
+
+ u8 ign_zone_grp:1; /* byte 8 */
+ u8 _r_b:7;
+
+ u8 phy_id; /* byte 9 */
+ u8 _r_c; /* byte 10 */
+ u8 _r_d; /* byte 11 */
+} __packed;
+
+/*
+ * struct smp_req_config_route_info - This structure defines the
+ * contents of an SMP Configure Route Information request.
+ *
+ * For specific information on each of these individual fields please reference
+ * the SAS specification.
+ */
+struct smp_req_conf_rtinfo {
+ u16 exp_change_cnt; /* bytes 4-5 */
+ u8 exp_rt_idx_hi; /* byte 6 */
+ u8 exp_rt_idx; /* byte 7 */
+
+ u8 _r_a; /* byte 8 */
+ u8 phy_id; /* byte 9 */
+ u16 _r_b; /* bytes 10-11 */
+
+ u8 _r_c:7; /* byte 12 */
+ u8 dis_rt_entry:1;
+ u8 _r_d[3]; /* bytes 13-15 */
+
+ u8 rt_sas_addr[8]; /* bytes 16-23 */
+ u8 _r_e[16]; /* bytes 24-39 */
+} __packed;
+
+/*
+ * struct smp_req_phycntl - This structure defines the contents of an
+ * SMP Phy Controller request.
+ *
+ * For specific information on each of these individual fields please reference
+ * the SAS specification.
+ */
+struct smp_req_phycntl {
+ u16 exp_change_cnt; /* byte 4-5 */
+
+ u8 _r_a[3]; /* bytes 6-8 */
+
+ u8 phy_id; /* byte 9 */
+ u8 phy_op; /* byte 10 */
+
+ u8 upd_pathway:1; /* byte 11 */
+ u8 _r_b:7;
+
+ u8 _r_c[12]; /* byte 12-23 */
+
+ u8 att_dev_name[8]; /* byte 24-31 */
+
+ u8 _r_d:4; /* byte 32 */
+ u8 min_linkrate:4;
+
+ u8 _r_e:4; /* byte 33 */
+ u8 max_linkrate:4;
+
+ u8 _r_f[2]; /* byte 34-35 */
+
+ u8 pathway:4; /* byte 36 */
+ u8 _r_g:4;
+
+ u8 _r_h[3]; /* bytes 37-39 */
+} __packed;
+
+/*
+ * struct smp_req - This structure simply unionizes the existing request
+ * structures into a common request type.
+ *
+ * XXX: This data structure may need to go to scsi/sas.h
+ */
+struct smp_req {
+ u8 type; /* byte 0 */
+ u8 func; /* byte 1 */
+ u8 alloc_resp_len; /* byte 2 */
+ u8 req_len; /* byte 3 */
+ u8 req_data[0];
+} __packed;
+
+#define SMP_RESP_HDR_SZ 4
+
+/*
+ * struct sci_sas_address - This structure depicts how a SAS address is
+ * represented by SCI.
+ * XXX convert this to u8 [SAS_ADDR_SIZE] like the rest of libsas
+ *
+ */
+struct sci_sas_address {
+ u32 high;
+ u32 low;
+};
+#endif
diff --git a/drivers/scsi/isci/scu_completion_codes.h b/drivers/scsi/isci/scu_completion_codes.h
new file mode 100644
index 0000000..c8b329c
--- /dev/null
+++ b/drivers/scsi/isci/scu_completion_codes.h
@@ -0,0 +1,283 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SCU_COMPLETION_CODES_HEADER_
+#define _SCU_COMPLETION_CODES_HEADER_
+
+/**
+ * This file contains the constants and macros for the SCU hardware completion
+ * codes.
+ *
+ *
+ */
+
+#define SCU_COMPLETION_TYPE_SHIFT 28
+#define SCU_COMPLETION_TYPE_MASK 0x70000000
+
+/**
+ * SCU_COMPLETION_TYPE() -
+ *
+ * This macro constructs an SCU completion type
+ */
+#define SCU_COMPLETION_TYPE(type) \
+ ((u32)(type) << SCU_COMPLETION_TYPE_SHIFT)
+
+/**
+ * SCU_COMPLETION_TYPE() -
+ *
+ * These macros contain the SCU completion types SCU_COMPLETION_TYPE
+ */
+#define SCU_COMPLETION_TYPE_TASK SCU_COMPLETION_TYPE(0)
+#define SCU_COMPLETION_TYPE_SDMA SCU_COMPLETION_TYPE(1)
+#define SCU_COMPLETION_TYPE_UFI SCU_COMPLETION_TYPE(2)
+#define SCU_COMPLETION_TYPE_EVENT SCU_COMPLETION_TYPE(3)
+#define SCU_COMPLETION_TYPE_NOTIFY SCU_COMPLETION_TYPE(4)
+
+/**
+ *
+ *
+ * These constants provide the shift and mask values for the various parts of
+ * an SCU completion code.
+ */
+#define SCU_COMPLETION_STATUS_MASK 0x0FFC0000
+#define SCU_COMPLETION_TL_STATUS_MASK 0x0FC00000
+#define SCU_COMPLETION_TL_STATUS_SHIFT 22
+#define SCU_COMPLETION_SDMA_STATUS_MASK 0x003C0000
+#define SCU_COMPLETION_PEG_MASK 0x00010000
+#define SCU_COMPLETION_PORT_MASK 0x00007000
+#define SCU_COMPLETION_PE_MASK SCU_COMPLETION_PORT_MASK
+#define SCU_COMPLETION_PE_SHIFT 12
+#define SCU_COMPLETION_INDEX_MASK 0x00000FFF
+
+/**
+ * SCU_GET_COMPLETION_TYPE() -
+ *
+ * This macro returns the SCU completion type.
+ */
+#define SCU_GET_COMPLETION_TYPE(completion_code) \
+ ((completion_code) & SCU_COMPLETION_TYPE_MASK)
+
+/**
+ * SCU_GET_COMPLETION_STATUS() -
+ *
+ * This macro returns the SCU completion status.
+ */
+#define SCU_GET_COMPLETION_STATUS(completion_code) \
+ ((completion_code) & SCU_COMPLETION_STATUS_MASK)
+
+/**
+ * SCU_GET_COMPLETION_TL_STATUS() -
+ *
+ * This macro returns the transport layer completion status.
+ */
+#define SCU_GET_COMPLETION_TL_STATUS(completion_code) \
+ ((completion_code) & SCU_COMPLETION_TL_STATUS_MASK)
+
+/**
+ * SCU_MAKE_COMPLETION_STATUS() -
+ *
+ * This macro takes a completion code and performs the shift and mask
+ * operations to turn it into a completion code that can be compared to a
+ * SCU_GET_COMPLETION_TL_STATUS.
+ */
+#define SCU_MAKE_COMPLETION_STATUS(completion_code) \
+ ((u32)(completion_code) << SCU_COMPLETION_TL_STATUS_SHIFT)
+
+/**
+ * SCU_NORMALIZE_COMPLETION_STATUS() -
+ *
+ * This macro takes a SCU_GET_COMPLETION_TL_STATUS and normalizes it for a
+ * return code.
+ */
+#define SCU_NORMALIZE_COMPLETION_STATUS(completion_code) \
+ (\
+ ((completion_code) & SCU_COMPLETION_TL_STATUS_MASK) \
+ >> SCU_COMPLETION_TL_STATUS_SHIFT \
+ )
+
+/**
+ * SCU_GET_COMPLETION_SDMA_STATUS() -
+ *
+ * This macro returns the SDMA completion status.
+ */
+#define SCU_GET_COMPLETION_SDMA_STATUS(completion_code) \
+ ((completion_code) & SCU_COMPLETION_SDMA_STATUS_MASK)
+
+/**
+ * SCU_GET_COMPLETION_PEG() -
+ *
+ * This macro returns the Protocol Engine Group from the completion code.
+ */
+#define SCU_GET_COMPLETION_PEG(completion_code) \
+ ((completion_code) & SCU_COMPLETION_PEG_MASK)
+
+/**
+ * SCU_GET_COMPLETION_PORT() -
+ *
+ * This macro reuturns the logical port index from the completion code.
+ */
+#define SCU_GET_COMPLETION_PORT(completion_code) \
+ ((completion_code) & SCU_COMPLETION_PORT_MASK)
+
+/**
+ * SCU_GET_PROTOCOL_ENGINE_INDEX() -
+ *
+ * This macro returns the PE index from the completion code.
+ */
+#define SCU_GET_PROTOCOL_ENGINE_INDEX(completion_code) \
+ (((completion_code) & SCU_COMPLETION_PE_MASK) >> SCU_COMPLETION_PE_SHIFT)
+
+/**
+ * SCU_GET_COMPLETION_INDEX() -
+ *
+ * This macro returns the index of the completion which is either a TCi or an
+ * RNi depending on the completion type.
+ */
+#define SCU_GET_COMPLETION_INDEX(completion_code) \
+ ((completion_code) & SCU_COMPLETION_INDEX_MASK)
+
+#define SCU_UNSOLICITED_FRAME_MASK 0x0FFF0000
+#define SCU_UNSOLICITED_FRAME_SHIFT 16
+
+/**
+ * SCU_GET_FRAME_INDEX() -
+ *
+ * This macro returns a normalized frame index from an unsolicited frame
+ * completion.
+ */
+#define SCU_GET_FRAME_INDEX(completion_code) \
+ (\
+ ((completion_code) & SCU_UNSOLICITED_FRAME_MASK) \
+ >> SCU_UNSOLICITED_FRAME_SHIFT \
+ )
+
+#define SCU_UNSOLICITED_FRAME_ERROR_MASK 0x00008000
+
+/**
+ * SCU_GET_FRAME_ERROR() -
+ *
+ * This macro returns a zero (0) value if there is no frame error otherwise it
+ * returns non-zero (!0).
+ */
+#define SCU_GET_FRAME_ERROR(completion_code) \
+ ((completion_code) & SCU_UNSOLICITED_FRAME_ERROR_MASK)
+
+/**
+ *
+ *
+ * These constants represent normalized completion codes which must be shifted
+ * 18 bits to match it with the hardware completion code. In a 16-bit compiler,
+ * immediate constants are 16-bit values (the size of an int). If we shift
+ * those by 18 bits, we completely lose the value. To ensure the value is a
+ * 32-bit value like we want, each immediate value must be cast to a u32.
+ */
+#define SCU_TASK_DONE_GOOD ((u32)0x00)
+#define SCU_TASK_DONE_CRC_ERR ((u32)0x14)
+#define SCU_TASK_DONE_CHECK_RESPONSE ((u32)0x14)
+#define SCU_TASK_DONE_GEN_RESPONSE ((u32)0x15)
+#define SCU_TASK_DONE_NAK_CMD_ERR ((u32)0x16)
+#define SCU_TASK_DONE_CMD_LL_R_ERR ((u32)0x16)
+#define SCU_TASK_DONE_LL_R_ERR ((u32)0x17)
+#define SCU_TASK_DONE_ACK_NAK_TO ((u32)0x17)
+#define SCU_TASK_DONE_LL_PERR ((u32)0x18)
+#define SCU_TASK_DONE_LL_SY_TERM ((u32)0x19)
+#define SCU_TASK_DONE_NAK_ERR ((u32)0x19)
+#define SCU_TASK_DONE_LL_LF_TERM ((u32)0x1A)
+#define SCU_TASK_DONE_DATA_LEN_ERR ((u32)0x1A)
+#define SCU_TASK_DONE_LL_CL_TERM ((u32)0x1B)
+#define SCU_TASK_DONE_LL_ABORT_ERR ((u32)0x1B)
+#define SCU_TASK_DONE_SEQ_INV_TYPE ((u32)0x1C)
+#define SCU_TASK_DONE_UNEXP_XR ((u32)0x1C)
+#define SCU_TASK_DONE_INV_FIS_TYPE ((u32)0x1D)
+#define SCU_TASK_DONE_XR_IU_LEN_ERR ((u32)0x1D)
+#define SCU_TASK_DONE_INV_FIS_LEN ((u32)0x1E)
+#define SCU_TASK_DONE_XR_WD_LEN ((u32)0x1E)
+#define SCU_TASK_DONE_SDMA_ERR ((u32)0x1F)
+#define SCU_TASK_DONE_OFFSET_ERR ((u32)0x20)
+#define SCU_TASK_DONE_MAX_PLD_ERR ((u32)0x21)
+#define SCU_TASK_DONE_EXCESS_DATA ((u32)0x22)
+#define SCU_TASK_DONE_LF_ERR ((u32)0x23)
+#define SCU_TASK_DONE_UNEXP_FIS ((u32)0x24)
+#define SCU_TASK_DONE_UNEXP_RESP ((u32)0x24)
+#define SCU_TASK_DONE_EARLY_RESP ((u32)0x25)
+#define SCU_TASK_DONE_SMP_RESP_TO_ERR ((u32)0x26)
+#define SCU_TASK_DONE_DMASETUP_DIRERR ((u32)0x27)
+#define SCU_TASK_DONE_SMP_UFI_ERR ((u32)0x27)
+#define SCU_TASK_DONE_XFERCNT_ERR ((u32)0x28)
+#define SCU_TASK_DONE_SMP_FRM_TYPE_ERR ((u32)0x28)
+#define SCU_TASK_DONE_SMP_LL_RX_ERR ((u32)0x29)
+#define SCU_TASK_DONE_RESP_LEN_ERR ((u32)0x2A)
+#define SCU_TASK_DONE_UNEXP_DATA ((u32)0x2B)
+#define SCU_TASK_DONE_OPEN_FAIL ((u32)0x2C)
+#define SCU_TASK_DONE_UNEXP_SDBFIS ((u32)0x2D)
+#define SCU_TASK_DONE_REG_ERR ((u32)0x2E)
+#define SCU_TASK_DONE_SDB_ERR ((u32)0x2F)
+#define SCU_TASK_DONE_TASK_ABORT ((u32)0x30)
+#define SCU_TASK_DONE_CMD_SDMA_ERR ((U32)0x32)
+#define SCU_TASK_DONE_CMD_LL_ABORT_ERR ((U32)0x33)
+#define SCU_TASK_OPEN_REJECT_WRONG_DESTINATION ((u32)0x34)
+#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1 ((u32)0x35)
+#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2 ((u32)0x36)
+#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3 ((u32)0x37)
+#define SCU_TASK_OPEN_REJECT_BAD_DESTINATION ((u32)0x38)
+#define SCU_TASK_OPEN_REJECT_ZONE_VIOLATION ((u32)0x39)
+#define SCU_TASK_DONE_VIIT_ENTRY_NV ((u32)0x3A)
+#define SCU_TASK_DONE_IIT_ENTRY_NV ((u32)0x3B)
+#define SCU_TASK_DONE_RNCNV_OUTBOUND ((u32)0x3C)
+#define SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY ((u32)0x3D)
+#define SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED ((u32)0x3E)
+#define SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED ((u32)0x3F)
+
+#endif /* _SCU_COMPLETION_CODES_HEADER_ */
diff --git a/drivers/scsi/isci/scu_event_codes.h b/drivers/scsi/isci/scu_event_codes.h
new file mode 100644
index 0000000..36a945a
--- /dev/null
+++ b/drivers/scsi/isci/scu_event_codes.h
@@ -0,0 +1,336 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __SCU_EVENT_CODES_HEADER__
+#define __SCU_EVENT_CODES_HEADER__
+
+/**
+ * This file contains the constants and macros for the SCU event codes.
+ *
+ *
+ */
+
+#define SCU_EVENT_TYPE_CODE_SHIFT 24
+#define SCU_EVENT_TYPE_CODE_MASK 0x0F000000
+
+#define SCU_EVENT_SPECIFIC_CODE_SHIFT 18
+#define SCU_EVENT_SPECIFIC_CODE_MASK 0x00FC0000
+
+#define SCU_EVENT_CODE_MASK \
+ (SCU_EVENT_TYPE_CODE_MASK | SCU_EVENT_SPECIFIC_CODE_MASK)
+
+/**
+ * SCU_EVENT_TYPE() -
+ *
+ * This macro constructs an SCU event type from the type value.
+ */
+#define SCU_EVENT_TYPE(type) \
+ ((u32)(type) << SCU_EVENT_TYPE_CODE_SHIFT)
+
+/**
+ * SCU_EVENT_SPECIFIC() -
+ *
+ * This macro constructs an SCU event specifier from the code value.
+ */
+#define SCU_EVENT_SPECIFIC(code) \
+ ((u32)(code) << SCU_EVENT_SPECIFIC_CODE_SHIFT)
+
+/**
+ * SCU_EVENT_MESSAGE() -
+ *
+ * This macro constructs a combines an SCU event type and SCU event specifier
+ * from the type and code values.
+ */
+#define SCU_EVENT_MESSAGE(type, code) \
+ ((type) | SCU_EVENT_SPECIFIC(code))
+
+/**
+ * SCU_EVENT_TYPE() -
+ *
+ * SCU_EVENT_TYPES
+ */
+#define SCU_EVENT_TYPE_SMU_COMMAND_ERROR SCU_EVENT_TYPE(0x08)
+#define SCU_EVENT_TYPE_SMU_PCQ_ERROR SCU_EVENT_TYPE(0x09)
+#define SCU_EVENT_TYPE_SMU_ERROR SCU_EVENT_TYPE(0x00)
+#define SCU_EVENT_TYPE_TRANSPORT_ERROR SCU_EVENT_TYPE(0x01)
+#define SCU_EVENT_TYPE_BROADCAST_CHANGE SCU_EVENT_TYPE(0x02)
+#define SCU_EVENT_TYPE_OSSP_EVENT SCU_EVENT_TYPE(0x03)
+#define SCU_EVENT_TYPE_FATAL_MEMORY_ERROR SCU_EVENT_TYPE(0x0F)
+#define SCU_EVENT_TYPE_RNC_SUSPEND_TX SCU_EVENT_TYPE(0x04)
+#define SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX SCU_EVENT_TYPE(0x05)
+#define SCU_EVENT_TYPE_RNC_OPS_MISC SCU_EVENT_TYPE(0x06)
+#define SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT SCU_EVENT_TYPE(0x07)
+#define SCU_EVENT_TYPE_ERR_CNT_EVENT SCU_EVENT_TYPE(0x0A)
+
+/**
+ *
+ *
+ * SCU_EVENT_SPECIFIERS
+ */
+#define SCU_EVENT_SPECIFIER_DRIVER_SUSPEND 0x20
+#define SCU_EVENT_SPECIFIER_RNC_RELEASE 0x00
+
+/**
+ *
+ *
+ * SMU_COMMAND_EVENTS
+ */
+#define SCU_EVENT_INVALID_CONTEXT_COMMAND \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_COMMAND_ERROR, 0x00)
+
+/**
+ *
+ *
+ * SMU_PCQ_EVENTS
+ */
+#define SCU_EVENT_UNCORRECTABLE_PCQ_ERROR \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_PCQ_ERROR, 0x00)
+
+/**
+ *
+ *
+ * SMU_EVENTS
+ */
+#define SCU_EVENT_UNCORRECTABLE_REGISTER_WRITE \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x02)
+#define SCU_EVENT_UNCORRECTABLE_REGISTER_READ \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x03)
+#define SCU_EVENT_PCIE_INTERFACE_ERROR \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x04)
+#define SCU_EVENT_FUNCTION_LEVEL_RESET \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x05)
+
+/**
+ *
+ *
+ * TRANSPORT_LEVEL_ERRORS
+ */
+#define SCU_EVENT_ACK_NAK_TIMEOUT_ERROR \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_TRANSPORT_ERROR, 0x00)
+
+/**
+ *
+ *
+ * BROADCAST_CHANGE_EVENTS
+ */
+#define SCU_EVENT_BROADCAST_CHANGE \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x01)
+#define SCU_EVENT_BROADCAST_RESERVED0 \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x02)
+#define SCU_EVENT_BROADCAST_RESERVED1 \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x03)
+#define SCU_EVENT_BROADCAST_SES \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x04)
+#define SCU_EVENT_BROADCAST_EXPANDER \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x05)
+#define SCU_EVENT_BROADCAST_AEN \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x06)
+#define SCU_EVENT_BROADCAST_RESERVED3 \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x07)
+#define SCU_EVENT_BROADCAST_RESERVED4 \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x08)
+#define SCU_EVENT_PE_SUSPENDED \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x09)
+
+/**
+ *
+ *
+ * OSSP_EVENTS
+ */
+#define SCU_EVENT_PORT_SELECTOR_DETECTED \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x10)
+#define SCU_EVENT_SENT_PORT_SELECTION \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x11)
+#define SCU_EVENT_HARD_RESET_TRANSMITTED \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x12)
+#define SCU_EVENT_HARD_RESET_RECEIVED \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x13)
+#define SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x15)
+#define SCU_EVENT_LINK_FAILURE \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x16)
+#define SCU_EVENT_SATA_SPINUP_HOLD \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x17)
+#define SCU_EVENT_SAS_15_SSC \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x18)
+#define SCU_EVENT_SAS_15 \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x19)
+#define SCU_EVENT_SAS_30_SSC \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1A)
+#define SCU_EVENT_SAS_30 \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1B)
+#define SCU_EVENT_SAS_60_SSC \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1C)
+#define SCU_EVENT_SAS_60 \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1D)
+#define SCU_EVENT_SATA_15_SSC \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1E)
+#define SCU_EVENT_SATA_15 \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1F)
+#define SCU_EVENT_SATA_30_SSC \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x20)
+#define SCU_EVENT_SATA_30 \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x21)
+#define SCU_EVENT_SATA_60_SSC \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x22)
+#define SCU_EVENT_SATA_60 \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x23)
+#define SCU_EVENT_SAS_PHY_DETECTED \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x24)
+#define SCU_EVENT_SATA_PHY_DETECTED \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x25)
+
+/**
+ *
+ *
+ * FATAL_INTERNAL_MEMORY_ERROR_EVENTS
+ */
+#define SCU_EVENT_TSC_RNSC_UNCORRECTABLE_ERROR \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x00)
+#define SCU_EVENT_TC_RNC_UNCORRECTABLE_ERROR \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x01)
+#define SCU_EVENT_ZPT_UNCORRECTABLE_ERROR \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x02)
+
+/**
+ *
+ *
+ * REMOTE_NODE_SUSPEND_EVENTS
+ */
+#define SCU_EVENT_TL_RNC_SUSPEND_TX \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX, 0x00)
+#define SCU_EVENT_TL_RNC_SUSPEND_TX_RX \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX, 0x00)
+#define SCU_EVENT_DRIVER_POST_RNC_SUSPEND_TX \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX, 0x20)
+#define SCU_EVENT_DRIVER_POST_RNC_SUSPEND_TX_RX \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX, 0x20)
+
+/**
+ *
+ *
+ * REMOTE_NODE_MISC_EVENTS
+ */
+#define SCU_EVENT_POST_RCN_RELEASE \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, SCU_EVENT_SPECIFIER_RNC_RELEASE)
+#define SCU_EVENT_POST_IT_NEXUS_LOSS_TIMER_ENABLE \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x01)
+#define SCU_EVENT_POST_IT_NEXUS_LOSS_TIMER_DISABLE \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x02)
+#define SCU_EVENT_POST_RNC_COMPLETE \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x03)
+#define SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x04)
+
+/**
+ *
+ *
+ * ERROR_COUNT_EVENT
+ */
+#define SCU_EVENT_RX_CREDIT_BLOCKED_RECEIVED \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x00)
+#define SCU_EVENT_TX_DONE_CREDIT_TIMEOUT \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x01)
+#define SCU_EVENT_RX_DONE_CREDIT_TIMEOUT \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x02)
+
+/**
+ * scu_get_event_type() -
+ *
+ * This macro returns the SCU event type from the event code.
+ */
+#define scu_get_event_type(event_code) \
+ ((event_code) & SCU_EVENT_TYPE_CODE_MASK)
+
+/**
+ * scu_get_event_specifier() -
+ *
+ * This macro returns the SCU event specifier from the event code.
+ */
+#define scu_get_event_specifier(event_code) \
+ ((event_code) & SCU_EVENT_SPECIFIC_CODE_MASK)
+
+/**
+ * scu_get_event_code() -
+ *
+ * This macro returns the combined SCU event type and SCU event specifier from
+ * the event code.
+ */
+#define scu_get_event_code(event_code) \
+ ((event_code) & SCU_EVENT_CODE_MASK)
+
+
+/**
+ *
+ *
+ * PTS_SCHEDULE_EVENT
+ */
+#define SCU_EVENT_SMP_RESPONSE_NO_PE \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x00)
+#define SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE \
+ scu_get_event_specifier(SCU_EVENT_SMP_RESPONSE_NO_PE)
+
+#define SCU_EVENT_TASK_TIMEOUT \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x01)
+#define SCU_EVENT_SPECIFIC_TASK_TIMEOUT \
+ scu_get_event_specifier(SCU_EVENT_TASK_TIMEOUT)
+
+#define SCU_EVENT_IT_NEXUS_TIMEOUT \
+ SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x02)
+#define SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT \
+ scu_get_event_specifier(SCU_EVENT_IT_NEXUS_TIMEOUT)
+
+
+#endif /* __SCU_EVENT_CODES_HEADER__ */
diff --git a/drivers/scsi/isci/scu_remote_node_context.h b/drivers/scsi/isci/scu_remote_node_context.h
new file mode 100644
index 0000000..33745ad
--- /dev/null
+++ b/drivers/scsi/isci/scu_remote_node_context.h
@@ -0,0 +1,229 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __SCU_REMOTE_NODE_CONTEXT_HEADER__
+#define __SCU_REMOTE_NODE_CONTEXT_HEADER__
+
+/**
+ * This file contains the structures and constatns used by the SCU hardware to
+ * describe a remote node context.
+ *
+ *
+ */
+
+/**
+ * struct ssp_remote_node_context - This structure contains the SCU hardware
+ * definition for an SSP remote node.
+ *
+ *
+ */
+struct ssp_remote_node_context {
+ /* WORD 0 */
+
+ /**
+ * This field is the remote node index assigned for this remote node. All
+ * remote nodes must have a unique remote node index. The value of the remote
+ * node index can not exceed the maximum number of remote nodes reported in
+ * the SCU device context capacity register.
+ */
+ u32 remote_node_index:12;
+ u32 reserved0_1:4;
+
+ /**
+ * This field tells the SCU hardware how many simultaneous connections that
+ * this remote node will support.
+ */
+ u32 remote_node_port_width:4;
+
+ /**
+ * This field tells the SCU hardware which logical port to associate with this
+ * remote node.
+ */
+ u32 logical_port_index:3;
+ u32 reserved0_2:5;
+
+ /**
+ * This field will enable the I_T nexus loss timer for this remote node.
+ */
+ u32 nexus_loss_timer_enable:1;
+
+ /**
+ * This field is the for driver debug only and is not used.
+ */
+ u32 check_bit:1;
+
+ /**
+ * This field must be set to true when the hardware DMAs the remote node
+ * context to the hardware SRAM. When the remote node is being invalidated
+ * this field must be set to false.
+ */
+ u32 is_valid:1;
+
+ /**
+ * This field must be set to true.
+ */
+ u32 is_remote_node_context:1;
+
+ /* WORD 1 - 2 */
+
+ /**
+ * This is the low word of the remote device SAS Address
+ */
+ u32 remote_sas_address_lo;
+
+ /**
+ * This field is the high word of the remote device SAS Address
+ */
+ u32 remote_sas_address_hi;
+
+ /* WORD 3 */
+ /**
+ * This field reprensets the function number assigned to this remote device.
+ * This value must match the virtual function number that is being used to
+ * communicate to the device.
+ */
+ u32 function_number:8;
+ u32 reserved3_1:8;
+
+ /**
+ * This field provides the driver a way to cheat on the arbitration wait time
+ * for this remote node.
+ */
+ u32 arbitration_wait_time:16;
+
+ /* WORD 4 */
+ /**
+ * This field tells the SCU hardware how long this device may occupy the
+ * connection before it must be closed.
+ */
+ u32 connection_occupancy_timeout:16;
+
+ /**
+ * This field tells the SCU hardware how long to maintain a connection when
+ * there are no frames being transmitted on the link.
+ */
+ u32 connection_inactivity_timeout:16;
+
+ /* WORD 5 */
+ /**
+ * This field allows the driver to cheat on the arbitration wait time for this
+ * remote node.
+ */
+ u32 initial_arbitration_wait_time:16;
+
+ /**
+ * This field is tells the hardware what to program for the connection rate in
+ * the open address frame. See the SAS spec for valid values.
+ */
+ u32 oaf_connection_rate:4;
+
+ /**
+ * This field tells the SCU hardware what to program for the features in the
+ * open address frame. See the SAS spec for valid values.
+ */
+ u32 oaf_features:4;
+
+ /**
+ * This field tells the SCU hardware what to use for the source zone group in
+ * the open address frame. See the SAS spec for more details on zoning.
+ */
+ u32 oaf_source_zone_group:8;
+
+ /* WORD 6 */
+ /**
+ * This field tells the SCU hardware what to use as the more capibilities in
+ * the open address frame. See the SAS Spec for details.
+ */
+ u32 oaf_more_compatibility_features;
+
+ /* WORD 7 */
+ u32 reserved7;
+
+};
+
+/**
+ * struct stp_remote_node_context - This structure contains the SCU hardware
+ * definition for a STP remote node.
+ *
+ * STP Targets are not yet supported so this definition is a placeholder until
+ * we do support them.
+ */
+struct stp_remote_node_context {
+ /**
+ * Placeholder data for the STP remote node.
+ */
+ u32 data[8];
+
+};
+
+/**
+ * This union combines the SAS and SATA remote node definitions.
+ *
+ * union scu_remote_node_context
+ */
+union scu_remote_node_context {
+ /**
+ * SSP Remote Node
+ */
+ struct ssp_remote_node_context ssp;
+
+ /**
+ * STP Remote Node
+ */
+ struct stp_remote_node_context stp;
+
+};
+
+#endif /* __SCU_REMOTE_NODE_CONTEXT_HEADER__ */
diff --git a/drivers/scsi/isci/scu_task_context.h b/drivers/scsi/isci/scu_task_context.h
new file mode 100644
index 0000000..7df87d9
--- /dev/null
+++ b/drivers/scsi/isci/scu_task_context.h
@@ -0,0 +1,942 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SCU_TASK_CONTEXT_H_
+#define _SCU_TASK_CONTEXT_H_
+
+/**
+ * This file contains the structures and constants for the SCU hardware task
+ * context.
+ *
+ *
+ */
+
+
+/**
+ * enum scu_ssp_task_type - This enumberation defines the various SSP task
+ * types the SCU hardware will accept. The definition for the various task
+ * types the SCU hardware will accept can be found in the DS specification.
+ *
+ *
+ */
+typedef enum {
+ SCU_TASK_TYPE_IOREAD, /* /< IO READ direction or no direction */
+ SCU_TASK_TYPE_IOWRITE, /* /< IO Write direction */
+ SCU_TASK_TYPE_SMP_REQUEST, /* /< SMP Request type */
+ SCU_TASK_TYPE_RESPONSE, /* /< Driver generated response frame (targt mode) */
+ SCU_TASK_TYPE_RAW_FRAME, /* /< Raw frame request type */
+ SCU_TASK_TYPE_PRIMITIVE /* /< Request for a primitive to be transmitted */
+} scu_ssp_task_type;
+
+/**
+ * enum scu_sata_task_type - This enumeration defines the various SATA task
+ * types the SCU hardware will accept. The definition for the various task
+ * types the SCU hardware will accept can be found in the DS specification.
+ *
+ *
+ */
+typedef enum {
+ SCU_TASK_TYPE_DMA_IN, /* /< Read request */
+ SCU_TASK_TYPE_FPDMAQ_READ, /* /< NCQ read request */
+ SCU_TASK_TYPE_PACKET_DMA_IN, /* /< Packet read request */
+ SCU_TASK_TYPE_SATA_RAW_FRAME, /* /< Raw frame request */
+ RESERVED_4,
+ RESERVED_5,
+ RESERVED_6,
+ RESERVED_7,
+ SCU_TASK_TYPE_DMA_OUT, /* /< Write request */
+ SCU_TASK_TYPE_FPDMAQ_WRITE, /* /< NCQ write Request */
+ SCU_TASK_TYPE_PACKET_DMA_OUT /* /< Packet write request */
+} scu_sata_task_type;
+
+
+/**
+ *
+ *
+ * SCU_CONTEXT_TYPE
+ */
+#define SCU_TASK_CONTEXT_TYPE 0
+#define SCU_RNC_CONTEXT_TYPE 1
+
+/**
+ *
+ *
+ * SCU_TASK_CONTEXT_VALIDITY
+ */
+#define SCU_TASK_CONTEXT_INVALID 0
+#define SCU_TASK_CONTEXT_VALID 1
+
+/**
+ *
+ *
+ * SCU_COMMAND_CODE
+ */
+#define SCU_COMMAND_CODE_INITIATOR_NEW_TASK 0
+#define SCU_COMMAND_CODE_ACTIVE_TASK 1
+#define SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK 2
+#define SCU_COMMAND_CODE_TARGET_RAW_FRAMES 3
+
+/**
+ *
+ *
+ * SCU_TASK_PRIORITY
+ */
+/**
+ *
+ *
+ * This priority is used when there is no priority request for this request.
+ */
+#define SCU_TASK_PRIORITY_NORMAL 0
+
+/**
+ *
+ *
+ * This priority indicates that the task should be scheduled to the head of the
+ * queue. The task will NOT be executed if the TX is suspended for the remote
+ * node.
+ */
+#define SCU_TASK_PRIORITY_HEAD_OF_Q 1
+
+/**
+ *
+ *
+ * This priority indicates that the task will be executed before all
+ * SCU_TASK_PRIORITY_NORMAL and SCU_TASK_PRIORITY_HEAD_OF_Q tasks. The task
+ * WILL be executed if the TX is suspended for the remote node.
+ */
+#define SCU_TASK_PRIORITY_HIGH 2
+
+/**
+ *
+ *
+ * This task priority is reserved and should not be used.
+ */
+#define SCU_TASK_PRIORITY_RESERVED 3
+
+#define SCU_TASK_INITIATOR_MODE 1
+#define SCU_TASK_TARGET_MODE 0
+
+#define SCU_TASK_REGULAR 0
+#define SCU_TASK_ABORTED 1
+
+/* direction bit defintion */
+/**
+ *
+ *
+ * SATA_DIRECTION
+ */
+#define SCU_SATA_WRITE_DATA_DIRECTION 0
+#define SCU_SATA_READ_DATA_DIRECTION 1
+
+/**
+ *
+ *
+ * SCU_COMMAND_CONTEXT_MACROS These macros provide the mask and shift
+ * operations to construct the various SCU commands
+ */
+#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT 21
+#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK 0x00E00000
+#define scu_get_command_request_type(x) \
+ ((x) & SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK)
+
+#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT 18
+#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK 0x001C0000
+#define scu_get_command_request_subtype(x) \
+ ((x) & SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK)
+
+#define SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK \
+ (\
+ SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK \
+ | SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK \
+ )
+#define scu_get_command_request_full_type(x) \
+ ((x) & SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK)
+
+#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT 16
+#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK 0x00010000
+#define scu_get_command_protocl_engine_group(x) \
+ ((x) & SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK)
+
+#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT 12
+#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK 0x00007000
+#define scu_get_command_reqeust_logical_port(x) \
+ ((x) & SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK)
+
+
+#define MAKE_SCU_CONTEXT_COMMAND_TYPE(type) \
+ ((u32)(type) << SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT)
+
+/**
+ * MAKE_SCU_CONTEXT_COMMAND_TYPE() -
+ *
+ * SCU_COMMAND_TYPES These constants provide the grouping of the different SCU
+ * command types.
+ */
+#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(0)
+#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(1)
+#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(2)
+#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(3)
+#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(6)
+
+#define MAKE_SCU_CONTEXT_COMMAND_REQUEST(type, command) \
+ ((type) | ((command) << SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT))
+
+/**
+ *
+ *
+ * SCU_REQUEST_TYPES These constants are the various request types that can be
+ * posted to the SCU hardware.
+ */
+#define SCU_CONTEXT_COMMAND_REQUST_POST_TC \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 0))
+
+#define SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 1))
+
+#define SCU_CONTEXT_COMMAND_REQUST_DUMP_TC \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC, 0))
+
+#define SCU_CONTEXT_COMMAND_POST_RNC_32 \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 0))
+
+#define SCU_CONTEXT_COMMAND_POST_RNC_96 \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 1))
+
+#define SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 2))
+
+#define SCU_CONTEXT_COMMAND_DUMP_RNC_32 \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 0))
+
+#define SCU_CONTEXT_COMMAND_DUMP_RNC_96 \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 1))
+
+#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 0))
+
+#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 1))
+
+#define SCU_CONTEXT_COMMAND_POST_RNC_RESUME \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 2))
+
+#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_ENABLE \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 3))
+
+#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_DISABLE \
+ (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 4))
+
+/**
+ *
+ *
+ * SCU_TASK_CONTEXT_PROTOCOL SCU Task context protocol types this is uesd to
+ * program the SCU Task context protocol field in word 0x00.
+ */
+#define SCU_TASK_CONTEXT_PROTOCOL_SMP 0x00
+#define SCU_TASK_CONTEXT_PROTOCOL_SSP 0x01
+#define SCU_TASK_CONTEXT_PROTOCOL_STP 0x02
+#define SCU_TASK_CONTEXT_PROTOCOL_NONE 0x07
+
+/**
+ * struct ssp_task_context - This is the SCU hardware definition for an SSP
+ * request.
+ *
+ *
+ */
+struct ssp_task_context {
+ /* OFFSET 0x18 */
+ u32 reserved00:24;
+ u32 frame_type:8;
+
+ /* OFFSET 0x1C */
+ u32 reserved01;
+
+ /* OFFSET 0x20 */
+ u32 fill_bytes:2;
+ u32 reserved02:6;
+ u32 changing_data_pointer:1;
+ u32 retransmit:1;
+ u32 retry_data_frame:1;
+ u32 tlr_control:2;
+ u32 reserved03:19;
+
+ /* OFFSET 0x24 */
+ u32 uiRsvd4;
+
+ /* OFFSET 0x28 */
+ u32 target_port_transfer_tag:16;
+ u32 tag:16;
+
+ /* OFFSET 0x2C */
+ u32 data_offset;
+};
+
+/**
+ * struct stp_task_context - This is the SCU hardware definition for an STP
+ * request.
+ *
+ *
+ */
+struct stp_task_context {
+ /* OFFSET 0x18 */
+ u32 fis_type:8;
+ u32 pm_port:4;
+ u32 reserved0:3;
+ u32 control:1;
+ u32 command:8;
+ u32 features:8;
+
+ /* OFFSET 0x1C */
+ u32 reserved1;
+
+ /* OFFSET 0x20 */
+ u32 reserved2;
+
+ /* OFFSET 0x24 */
+ u32 reserved3;
+
+ /* OFFSET 0x28 */
+ u32 ncq_tag:5;
+ u32 reserved4:27;
+
+ /* OFFSET 0x2C */
+ u32 data_offset; /* TODO: What is this used for? */
+};
+
+/**
+ * struct smp_task_context - This is the SCU hardware definition for an SMP
+ * request.
+ *
+ *
+ */
+struct smp_task_context {
+ /* OFFSET 0x18 */
+ u32 response_length:8;
+ u32 function_result:8;
+ u32 function:8;
+ u32 frame_type:8;
+
+ /* OFFSET 0x1C */
+ u32 smp_response_ufi:12;
+ u32 reserved1:20;
+
+ /* OFFSET 0x20 */
+ u32 reserved2;
+
+ /* OFFSET 0x24 */
+ u32 reserved3;
+
+ /* OFFSET 0x28 */
+ u32 reserved4;
+
+ /* OFFSET 0x2C */
+ u32 reserved5;
+};
+
+/**
+ * struct primitive_task_context - This is the SCU hardware definition used
+ * when the driver wants to send a primitive on the link.
+ *
+ *
+ */
+struct primitive_task_context {
+ /* OFFSET 0x18 */
+ /**
+ * This field is the control word and it must be 0.
+ */
+ u32 control; /* /< must be set to 0 */
+
+ /* OFFSET 0x1C */
+ /**
+ * This field specifies the primitive that is to be transmitted.
+ */
+ u32 sequence;
+
+ /* OFFSET 0x20 */
+ u32 reserved0;
+
+ /* OFFSET 0x24 */
+ u32 reserved1;
+
+ /* OFFSET 0x28 */
+ u32 reserved2;
+
+ /* OFFSET 0x2C */
+ u32 reserved3;
+};
+
+/**
+ * The union of the protocols that can be selected in the SCU task context
+ * field.
+ *
+ * protocol_context
+ */
+union protocol_context {
+ struct ssp_task_context ssp;
+ struct stp_task_context stp;
+ struct smp_task_context smp;
+ struct primitive_task_context primitive;
+ u32 words[6];
+};
+
+/**
+ * struct scu_sgl_element - This structure represents a single SCU defined SGL
+ * element. SCU SGLs contain a 64 bit address with the maximum data transfer
+ * being 24 bits in size. The SGL can not cross a 4GB boundary.
+ *
+ * struct scu_sgl_element
+ */
+struct scu_sgl_element {
+ /**
+ * This field is the upper 32 bits of the 64 bit physical address.
+ */
+ u32 address_upper;
+
+ /**
+ * This field is the lower 32 bits of the 64 bit physical address.
+ */
+ u32 address_lower;
+
+ /**
+ * This field is the number of bytes to transfer.
+ */
+ u32 length:24;
+
+ /**
+ * This field is the address modifier to be used when a virtual function is
+ * requesting a data transfer.
+ */
+ u32 address_modifier:8;
+
+};
+
+#define SCU_SGL_ELEMENT_PAIR_A 0
+#define SCU_SGL_ELEMENT_PAIR_B 1
+
+/**
+ * struct scu_sgl_element_pair - This structure is the SCU hardware definition
+ * of a pair of SGL elements. The SCU hardware always works on SGL pairs.
+ * They are refered to in the DS specification as SGL A and SGL B. Each SGL
+ * pair is followed by the address of the next pair.
+ *
+ *
+ */
+struct scu_sgl_element_pair {
+ /* OFFSET 0x60-0x68 */
+ /**
+ * This field is the SGL element A of the SGL pair.
+ */
+ struct scu_sgl_element A;
+
+ /* OFFSET 0x6C-0x74 */
+ /**
+ * This field is the SGL element B of the SGL pair.
+ */
+ struct scu_sgl_element B;
+
+ /* OFFSET 0x78-0x7C */
+ /**
+ * This field is the upper 32 bits of the 64 bit address to the next SGL
+ * element pair.
+ */
+ u32 next_pair_upper;
+
+ /**
+ * This field is the lower 32 bits of the 64 bit address to the next SGL
+ * element pair.
+ */
+ u32 next_pair_lower;
+
+};
+
+/**
+ * struct transport_snapshot - This structure is the SCU hardware scratch area
+ * for the task context. This is set to 0 by the driver but can be read by
+ * issuing a dump TC request to the SCU.
+ *
+ *
+ */
+struct transport_snapshot {
+ /* OFFSET 0x48 */
+ u32 xfer_rdy_write_data_length;
+
+ /* OFFSET 0x4C */
+ u32 data_offset;
+
+ /* OFFSET 0x50 */
+ u32 data_transfer_size:24;
+ u32 reserved_50_0:8;
+
+ /* OFFSET 0x54 */
+ u32 next_initiator_write_data_offset;
+
+ /* OFFSET 0x58 */
+ u32 next_initiator_write_data_xfer_size:24;
+ u32 reserved_58_0:8;
+};
+
+/**
+ * struct scu_task_context - This structure defines the contents of the SCU
+ * silicon task context. It lays out all of the fields according to the
+ * expected order and location for the Storage Controller unit.
+ *
+ *
+ */
+struct scu_task_context {
+ /* OFFSET 0x00 ------ */
+ /**
+ * This field must be encoded to one of the valid SCU task priority values
+ * - SCU_TASK_PRIORITY_NORMAL
+ * - SCU_TASK_PRIORITY_HEAD_OF_Q
+ * - SCU_TASK_PRIORITY_HIGH
+ */
+ u32 priority:2;
+
+ /**
+ * This field must be set to true if this is an initiator generated request.
+ * Until target mode is supported all task requests are initiator requests.
+ */
+ u32 initiator_request:1;
+
+ /**
+ * This field must be set to one of the valid connection rates valid values
+ * are 0x8, 0x9, and 0xA.
+ */
+ u32 connection_rate:4;
+
+ /**
+ * This field muse be programed when generating an SMP response since the SMP
+ * connection remains open until the SMP response is generated.
+ */
+ u32 protocol_engine_index:3;
+
+ /**
+ * This field must contain the logical port for the task request.
+ */
+ u32 logical_port_index:3;
+
+ /**
+ * This field must be set to one of the SCU_TASK_CONTEXT_PROTOCOL values
+ * - SCU_TASK_CONTEXT_PROTOCOL_SMP
+ * - SCU_TASK_CONTEXT_PROTOCOL_SSP
+ * - SCU_TASK_CONTEXT_PROTOCOL_STP
+ * - SCU_TASK_CONTEXT_PROTOCOL_NONE
+ */
+ u32 protocol_type:3;
+
+ /**
+ * This filed must be set to the TCi allocated for this task
+ */
+ u32 task_index:12;
+
+ /**
+ * This field is reserved and must be set to 0x00
+ */
+ u32 reserved_00_0:1;
+
+ /**
+ * For a normal task request this must be set to 0. If this is an abort of
+ * this task request it must be set to 1.
+ */
+ u32 abort:1;
+
+ /**
+ * This field must be set to true for the SCU hardware to process the task.
+ */
+ u32 valid:1;
+
+ /**
+ * This field must be set to SCU_TASK_CONTEXT_TYPE
+ */
+ u32 context_type:1;
+
+ /* OFFSET 0x04 */
+ /**
+ * This field contains the RNi that is the target of this request.
+ */
+ u32 remote_node_index:12;
+
+ /**
+ * This field is programmed if this is a mirrored request, which we are not
+ * using, in which case it is the RNi for the mirrored target.
+ */
+ u32 mirrored_node_index:12;
+
+ /**
+ * This field is programmed with the direction of the SATA reqeust
+ * - SCU_SATA_WRITE_DATA_DIRECTION
+ * - SCU_SATA_READ_DATA_DIRECTION
+ */
+ u32 sata_direction:1;
+
+ /**
+ * This field is programmsed with one of the following SCU_COMMAND_CODE
+ * - SCU_COMMAND_CODE_INITIATOR_NEW_TASK
+ * - SCU_COMMAND_CODE_ACTIVE_TASK
+ * - SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK
+ * - SCU_COMMAND_CODE_TARGET_RAW_FRAMES
+ */
+ u32 command_code:2;
+
+ /**
+ * This field is set to true if the remote node should be suspended.
+ * This bit is only valid for SSP & SMP target devices.
+ */
+ u32 suspend_node:1;
+
+ /**
+ * This field is programmed with one of the following command type codes
+ *
+ * For SAS requests use the scu_ssp_task_type
+ * - SCU_TASK_TYPE_IOREAD
+ * - SCU_TASK_TYPE_IOWRITE
+ * - SCU_TASK_TYPE_SMP_REQUEST
+ * - SCU_TASK_TYPE_RESPONSE
+ * - SCU_TASK_TYPE_RAW_FRAME
+ * - SCU_TASK_TYPE_PRIMITIVE
+ *
+ * For SATA requests use the scu_sata_task_type
+ * - SCU_TASK_TYPE_DMA_IN
+ * - SCU_TASK_TYPE_FPDMAQ_READ
+ * - SCU_TASK_TYPE_PACKET_DMA_IN
+ * - SCU_TASK_TYPE_SATA_RAW_FRAME
+ * - SCU_TASK_TYPE_DMA_OUT
+ * - SCU_TASK_TYPE_FPDMAQ_WRITE
+ * - SCU_TASK_TYPE_PACKET_DMA_OUT
+ */
+ u32 task_type:4;
+
+ /* OFFSET 0x08 */
+ /**
+ * This field is reserved and the must be set to 0x00
+ */
+ u32 link_layer_control:8; /* presently all reserved */
+
+ /**
+ * This field is set to true when TLR is to be enabled
+ */
+ u32 ssp_tlr_enable:1;
+
+ /**
+ * This is field specifies if the SCU DMAs a response frame to host
+ * memory for good response frames when operating in target mode.
+ */
+ u32 dma_ssp_target_good_response:1;
+
+ /**
+ * This field indicates if the SCU should DMA the response frame to
+ * host memory.
+ */
+ u32 do_not_dma_ssp_good_response:1;
+
+ /**
+ * This field is set to true when strict ordering is to be enabled
+ */
+ u32 strict_ordering:1;
+
+ /**
+ * This field indicates the type of endianess to be utilized for the
+ * frame. command, task, and response frames utilized control_frame
+ * set to 1.
+ */
+ u32 control_frame:1;
+
+ /**
+ * This field is reserved and the driver should set to 0x00
+ */
+ u32 tl_control_reserved:3;
+
+ /**
+ * This field is set to true when the SCU hardware task timeout control is to
+ * be enabled
+ */
+ u32 timeout_enable:1;
+
+ /**
+ * This field is reserved and the driver should set it to 0x00
+ */
+ u32 pts_control_reserved:7;
+
+ /**
+ * This field should be set to true when block guard is to be enabled
+ */
+ u32 block_guard_enable:1;
+
+ /**
+ * This field is reserved and the driver should set to 0x00
+ */
+ u32 sdma_control_reserved:7;
+
+ /* OFFSET 0x0C */
+ /**
+ * This field is the address modifier for this io request it should be
+ * programmed with the virtual function that is making the request.
+ */
+ u32 address_modifier:16;
+
+ /**
+ * @todo What we support mirrored SMP response frame?
+ */
+ u32 mirrored_protocol_engine:3; /* mirrored protocol Engine Index */
+
+ /**
+ * If this is a mirrored request the logical port index for the mirrored RNi
+ * must be programmed.
+ */
+ u32 mirrored_logical_port:4; /* mirrored local port index */
+
+ /**
+ * This field is reserved and the driver must set it to 0x00
+ */
+ u32 reserved_0C_0:8;
+
+ /**
+ * This field must be set to true if the mirrored request processing is to be
+ * enabled.
+ */
+ u32 mirror_request_enable:1; /* Mirrored request Enable */
+
+ /* OFFSET 0x10 */
+ /**
+ * This field is the command iu length in dwords
+ */
+ u32 ssp_command_iu_length:8;
+
+ /**
+ * This is the target TLR enable bit it must be set to 0 when creatning the
+ * task context.
+ */
+ u32 xfer_ready_tlr_enable:1;
+
+ /**
+ * This field is reserved and the driver must set it to 0x00
+ */
+ u32 reserved_10_0:7;
+
+ /**
+ * This is the maximum burst size that the SCU hardware will send in one
+ * connection its value is (N x 512) and N must be a multiple of 2. If the
+ * value is 0x00 then maximum burst size is disabled.
+ */
+ u32 ssp_max_burst_size:16;
+
+ /* OFFSET 0x14 */
+ /**
+ * This filed is set to the number of bytes to be transfered in the request.
+ */
+ u32 transfer_length_bytes:24; /* In terms of bytes */
+
+ /**
+ * This field is reserved and the driver should set it to 0x00
+ */
+ u32 reserved_14_0:8;
+
+ /* OFFSET 0x18-0x2C */
+ /**
+ * This union provides for the protocol specif part of the SCU Task Context.
+ */
+ union protocol_context type;
+
+ /* OFFSET 0x30-0x34 */
+ /**
+ * This field is the upper 32 bits of the 64 bit physical address of the
+ * command iu buffer
+ */
+ u32 command_iu_upper;
+
+ /**
+ * This field is the lower 32 bits of the 64 bit physical address of the
+ * command iu buffer
+ */
+ u32 command_iu_lower;
+
+ /* OFFSET 0x38-0x3C */
+ /**
+ * This field is the upper 32 bits of the 64 bit physical address of the
+ * response iu buffer
+ */
+ u32 response_iu_upper;
+
+ /**
+ * This field is the lower 32 bits of the 64 bit physical address of the
+ * response iu buffer
+ */
+ u32 response_iu_lower;
+
+ /* OFFSET 0x40 */
+ /**
+ * This field is set to the task phase of the SCU hardware. The driver must
+ * set this to 0x01
+ */
+ u32 task_phase:8;
+
+ /**
+ * This field is set to the transport layer task status. The driver must set
+ * this to 0x00
+ */
+ u32 task_status:8;
+
+ /**
+ * This field is used during initiator write TLR
+ */
+ u32 previous_extended_tag:4;
+
+ /**
+ * This field is set the maximum number of retries for a STP non-data FIS
+ */
+ u32 stp_retry_count:2;
+
+ /**
+ * This field is reserved and the driver must set it to 0x00
+ */
+ u32 reserved_40_1:2;
+
+ /**
+ * This field is used by the SCU TL to determine when to take a snapshot when
+ * tranmitting read data frames.
+ * - 0x00 The entire IO
+ * - 0x01 32k
+ * - 0x02 64k
+ * - 0x04 128k
+ * - 0x08 256k
+ */
+ u32 ssp_tlr_threshold:4;
+
+ /**
+ * This field is reserved and the driver must set it to 0x00
+ */
+ u32 reserved_40_2:4;
+
+ /* OFFSET 0x44 */
+ u32 write_data_length; /* read only set to 0 */
+
+ /* OFFSET 0x48-0x58 */
+ struct transport_snapshot snapshot; /* read only set to 0 */
+
+ /* OFFSET 0x5C */
+ u32 block_protection_enable:1;
+ u32 block_size:2;
+ u32 block_protection_function:2;
+ u32 reserved_5C_0:9;
+ u32 active_sgl_element:2; /* read only set to 0 */
+ u32 sgl_exhausted:1; /* read only set to 0 */
+ u32 payload_data_transfer_error:4; /* read only set to 0 */
+ u32 frame_buffer_offset:11; /* read only set to 0 */
+
+ /* OFFSET 0x60-0x7C */
+ /**
+ * This field is the first SGL element pair found in the TC data structure.
+ */
+ struct scu_sgl_element_pair sgl_pair_ab;
+ /* OFFSET 0x80-0x9C */
+ /**
+ * This field is the second SGL element pair found in the TC data structure.
+ */
+ struct scu_sgl_element_pair sgl_pair_cd;
+
+ /* OFFSET 0xA0-BC */
+ struct scu_sgl_element_pair sgl_snapshot_ac;
+
+ /* OFFSET 0xC0 */
+ u32 active_sgl_element_pair; /* read only set to 0 */
+
+ /* OFFSET 0xC4-0xCC */
+ u32 reserved_C4_CC[3];
+
+ /* OFFSET 0xD0 */
+ u32 intermediate_crc_value:16;
+ u32 initial_crc_seed:16;
+
+ /* OFFSET 0xD4 */
+ u32 application_tag_for_verify:16;
+ u32 application_tag_for_generate:16;
+
+ /* OFFSET 0xD8 */
+ u32 reference_tag_seed_for_verify_function;
+
+ /* OFFSET 0xDC */
+ u32 reserved_DC;
+
+ /* OFFSET 0xE0 */
+ u32 reserved_E0_0:16;
+ u32 application_tag_mask_for_generate:16;
+
+ /* OFFSET 0xE4 */
+ u32 block_protection_control:16;
+ u32 application_tag_mask_for_verify:16;
+
+ /* OFFSET 0xE8 */
+ u32 block_protection_error:8;
+ u32 reserved_E8_0:24;
+
+ /* OFFSET 0xEC */
+ u32 reference_tag_seed_for_verify;
+
+ /* OFFSET 0xF0 */
+ u32 intermediate_crc_valid_snapshot:16;
+ u32 reserved_F0_0:16;
+
+ /* OFFSET 0xF4 */
+ u32 reference_tag_seed_for_verify_function_snapshot;
+
+ /* OFFSET 0xF8 */
+ u32 snapshot_of_reserved_dword_DC_of_tc;
+
+ /* OFFSET 0xFC */
+ u32 reference_tag_seed_for_generate_function_snapshot;
+
+};
+
+#endif /* _SCU_TASK_CONTEXT_H_ */
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
new file mode 100644
index 0000000..d6bcdd0
--- /dev/null
+++ b/drivers/scsi/isci/task.c
@@ -0,0 +1,1676 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/completion.h>
+#include <linux/irqflags.h>
+#include "sas.h"
+#include <scsi/libsas.h>
+#include "remote_device.h"
+#include "remote_node_context.h"
+#include "isci.h"
+#include "request.h"
+#include "task.h"
+#include "host.h"
+
+/**
+* isci_task_refuse() - complete the request to the upper layer driver in
+* the case where an I/O needs to be completed back in the submit path.
+* @ihost: host on which the the request was queued
+* @task: request to complete
+* @response: response code for the completed task.
+* @status: status code for the completed task.
+*
+*/
+static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task,
+ enum service_response response,
+ enum exec_status status)
+
+{
+ enum isci_completion_selection disposition;
+
+ disposition = isci_perform_normal_io_completion;
+ disposition = isci_task_set_completion_status(task, response, status,
+ disposition);
+
+ /* Tasks aborted specifically by a call to the lldd_abort_task
+ * function should not be completed to the host in the regular path.
+ */
+ switch (disposition) {
+ case isci_perform_normal_io_completion:
+ /* Normal notification (task_done) */
+ dev_dbg(&ihost->pdev->dev,
+ "%s: Normal - task = %p, response=%d, "
+ "status=%d\n",
+ __func__, task, response, status);
+
+ task->lldd_task = NULL;
+
+ isci_execpath_callback(ihost, task, task->task_done);
+ break;
+
+ case isci_perform_aborted_io_completion:
+ /*
+ * No notification because this request is already in the
+ * abort path.
+ */
+ dev_dbg(&ihost->pdev->dev,
+ "%s: Aborted - task = %p, response=%d, "
+ "status=%d\n",
+ __func__, task, response, status);
+ break;
+
+ case isci_perform_error_io_completion:
+ /* Use sas_task_abort */
+ dev_dbg(&ihost->pdev->dev,
+ "%s: Error - task = %p, response=%d, "
+ "status=%d\n",
+ __func__, task, response, status);
+
+ isci_execpath_callback(ihost, task, sas_task_abort);
+ break;
+
+ default:
+ dev_dbg(&ihost->pdev->dev,
+ "%s: isci task notification default case!",
+ __func__);
+ sas_task_abort(task);
+ break;
+ }
+}
+
+#define for_each_sas_task(num, task) \
+ for (; num > 0; num--,\
+ task = list_entry(task->list.next, struct sas_task, list))
+
+
+static inline int isci_device_io_ready(struct isci_remote_device *idev,
+ struct sas_task *task)
+{
+ return idev ? test_bit(IDEV_IO_READY, &idev->flags) ||
+ (test_bit(IDEV_IO_NCQERROR, &idev->flags) &&
+ isci_task_is_ncq_recovery(task))
+ : 0;
+}
+/**
+ * isci_task_execute_task() - This function is one of the SAS Domain Template
+ * functions. This function is called by libsas to send a task down to
+ * hardware.
+ * @task: This parameter specifies the SAS task to send.
+ * @num: This parameter specifies the number of tasks to queue.
+ * @gfp_flags: This parameter specifies the context of this call.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags)
+{
+ struct isci_host *ihost = dev_to_ihost(task->dev);
+ struct isci_remote_device *idev;
+ unsigned long flags;
+ bool io_ready;
+ u16 tag;
+
+ dev_dbg(&ihost->pdev->dev, "%s: num=%d\n", __func__, num);
+
+ for_each_sas_task(num, task) {
+ enum sci_status status = SCI_FAILURE;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ idev = isci_lookup_device(task->dev);
+ io_ready = isci_device_io_ready(idev, task);
+ tag = isci_alloc_tag(ihost);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ dev_dbg(&ihost->pdev->dev,
+ "task: %p, num: %d dev: %p idev: %p:%#lx cmd = %p\n",
+ task, num, task->dev, idev, idev ? idev->flags : 0,
+ task->uldd_task);
+
+ if (!idev) {
+ isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED,
+ SAS_DEVICE_UNKNOWN);
+ } else if (!io_ready || tag == SCI_CONTROLLER_INVALID_IO_TAG) {
+ /* Indicate QUEUE_FULL so that the scsi midlayer
+ * retries.
+ */
+ isci_task_refuse(ihost, task, SAS_TASK_COMPLETE,
+ SAS_QUEUE_FULL);
+ } else {
+ /* There is a device and it's ready for I/O. */
+ spin_lock_irqsave(&task->task_state_lock, flags);
+
+ if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+ /* The I/O was aborted. */
+ spin_unlock_irqrestore(&task->task_state_lock,
+ flags);
+
+ isci_task_refuse(ihost, task,
+ SAS_TASK_UNDELIVERED,
+ SAM_STAT_TASK_ABORTED);
+ } else {
+ task->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ /* build and send the request. */
+ status = isci_request_execute(ihost, idev, task, tag);
+
+ if (status != SCI_SUCCESS) {
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ /* Did not really start this command. */
+ task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ /* Indicate QUEUE_FULL so that the scsi
+ * midlayer retries. if the request
+ * failed for remote device reasons,
+ * it gets returned as
+ * SAS_TASK_UNDELIVERED next time
+ * through.
+ */
+ isci_task_refuse(ihost, task,
+ SAS_TASK_COMPLETE,
+ SAS_QUEUE_FULL);
+ }
+ }
+ }
+ if (status != SCI_SUCCESS && tag != SCI_CONTROLLER_INVALID_IO_TAG) {
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ /* command never hit the device, so just free
+ * the tci and skip the sequence increment
+ */
+ isci_tci_free(ihost, ISCI_TAG_TCI(tag));
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ }
+ isci_put_device(idev);
+ }
+ return 0;
+}
+
+static enum sci_status isci_sata_management_task_request_build(struct isci_request *ireq)
+{
+ struct isci_tmf *isci_tmf;
+ enum sci_status status;
+
+ if (tmf_task != ireq->ttype)
+ return SCI_FAILURE;
+
+ isci_tmf = isci_request_access_tmf(ireq);
+
+ switch (isci_tmf->tmf_code) {
+
+ case isci_tmf_sata_srst_high:
+ case isci_tmf_sata_srst_low: {
+ struct host_to_dev_fis *fis = &ireq->stp.cmd;
+
+ memset(fis, 0, sizeof(*fis));
+
+ fis->fis_type = 0x27;
+ fis->flags &= ~0x80;
+ fis->flags &= 0xF0;
+ if (isci_tmf->tmf_code == isci_tmf_sata_srst_high)
+ fis->control |= ATA_SRST;
+ else
+ fis->control &= ~ATA_SRST;
+ break;
+ }
+ /* other management commnd go here... */
+ default:
+ return SCI_FAILURE;
+ }
+
+ /* core builds the protocol specific request
+ * based on the h2d fis.
+ */
+ status = sci_task_request_construct_sata(ireq);
+
+ return status;
+}
+
+static struct isci_request *isci_task_request_build(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ u16 tag, struct isci_tmf *isci_tmf)
+{
+ enum sci_status status = SCI_FAILURE;
+ struct isci_request *ireq = NULL;
+ struct domain_device *dev;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: isci_tmf = %p\n", __func__, isci_tmf);
+
+ dev = idev->domain_dev;
+
+ /* do common allocation and init of request object. */
+ ireq = isci_tmf_request_from_tag(ihost, isci_tmf, tag);
+ if (!ireq)
+ return NULL;
+
+ /* let the core do it's construct. */
+ status = sci_task_request_construct(ihost, idev, tag,
+ ireq);
+
+ if (status != SCI_SUCCESS) {
+ dev_warn(&ihost->pdev->dev,
+ "%s: sci_task_request_construct failed - "
+ "status = 0x%x\n",
+ __func__,
+ status);
+ return NULL;
+ }
+
+ /* XXX convert to get this from task->tproto like other drivers */
+ if (dev->dev_type == SAS_END_DEV) {
+ isci_tmf->proto = SAS_PROTOCOL_SSP;
+ status = sci_task_request_construct_ssp(ireq);
+ if (status != SCI_SUCCESS)
+ return NULL;
+ }
+
+ if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
+ isci_tmf->proto = SAS_PROTOCOL_SATA;
+ status = isci_sata_management_task_request_build(ireq);
+
+ if (status != SCI_SUCCESS)
+ return NULL;
+ }
+ return ireq;
+}
+
+static int isci_task_execute_tmf(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_tmf *tmf, unsigned long timeout_ms)
+{
+ DECLARE_COMPLETION_ONSTACK(completion);
+ enum sci_task_status status = SCI_TASK_FAILURE;
+ struct isci_request *ireq;
+ int ret = TMF_RESP_FUNC_FAILED;
+ unsigned long flags;
+ unsigned long timeleft;
+ u16 tag;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ tag = isci_alloc_tag(ihost);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ if (tag == SCI_CONTROLLER_INVALID_IO_TAG)
+ return ret;
+
+ /* sanity check, return TMF_RESP_FUNC_FAILED
+ * if the device is not there and ready.
+ */
+ if (!idev ||
+ (!test_bit(IDEV_IO_READY, &idev->flags) &&
+ !test_bit(IDEV_IO_NCQERROR, &idev->flags))) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: idev = %p not ready (%#lx)\n",
+ __func__,
+ idev, idev ? idev->flags : 0);
+ goto err_tci;
+ } else
+ dev_dbg(&ihost->pdev->dev,
+ "%s: idev = %p\n",
+ __func__, idev);
+
+ /* Assign the pointer to the TMF's completion kernel wait structure. */
+ tmf->complete = &completion;
+
+ ireq = isci_task_request_build(ihost, idev, tag, tmf);
+ if (!ireq)
+ goto err_tci;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ /* start the TMF io. */
+ status = sci_controller_start_task(ihost, idev, ireq);
+
+ if (status != SCI_TASK_SUCCESS) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: start_io failed - status = 0x%x, request = %p\n",
+ __func__,
+ status,
+ ireq);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ goto err_tci;
+ }
+
+ if (tmf->cb_state_func != NULL)
+ tmf->cb_state_func(isci_tmf_started, tmf, tmf->cb_data);
+
+ isci_request_change_state(ireq, started);
+
+ /* add the request to the remote device request list. */
+ list_add(&ireq->dev_node, &idev->reqs_in_process);
+
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ /* Wait for the TMF to complete, or a timeout. */
+ timeleft = wait_for_completion_timeout(&completion,
+ msecs_to_jiffies(timeout_ms));
+
+ if (timeleft == 0) {
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ if (tmf->cb_state_func != NULL)
+ tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data);
+
+ sci_controller_terminate_request(ihost,
+ idev,
+ ireq);
+
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ wait_for_completion(tmf->complete);
+ }
+
+ isci_print_tmf(tmf);
+
+ if (tmf->status == SCI_SUCCESS)
+ ret = TMF_RESP_FUNC_COMPLETE;
+ else if (tmf->status == SCI_FAILURE_IO_RESPONSE_VALID) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: tmf.status == "
+ "SCI_FAILURE_IO_RESPONSE_VALID\n",
+ __func__);
+ ret = TMF_RESP_FUNC_COMPLETE;
+ }
+ /* Else - leave the default "failed" status alone. */
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: completed request = %p\n",
+ __func__,
+ ireq);
+
+ return ret;
+
+ err_tci:
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ isci_tci_free(ihost, ISCI_TAG_TCI(tag));
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ return ret;
+}
+
+static void isci_task_build_tmf(struct isci_tmf *tmf,
+ enum isci_tmf_function_codes code,
+ void (*tmf_sent_cb)(enum isci_tmf_cb_state,
+ struct isci_tmf *,
+ void *),
+ void *cb_data)
+{
+ memset(tmf, 0, sizeof(*tmf));
+
+ tmf->tmf_code = code;
+ tmf->cb_state_func = tmf_sent_cb;
+ tmf->cb_data = cb_data;
+}
+
+static void isci_task_build_abort_task_tmf(struct isci_tmf *tmf,
+ enum isci_tmf_function_codes code,
+ void (*tmf_sent_cb)(enum isci_tmf_cb_state,
+ struct isci_tmf *,
+ void *),
+ struct isci_request *old_request)
+{
+ isci_task_build_tmf(tmf, code, tmf_sent_cb, old_request);
+ tmf->io_tag = old_request->io_tag;
+}
+
+/**
+ * isci_task_validate_request_to_abort() - This function checks the given I/O
+ * against the "started" state. If the request is still "started", it's
+ * state is changed to aborted. NOTE: isci_host->scic_lock MUST BE HELD
+ * BEFORE CALLING THIS FUNCTION.
+ * @isci_request: This parameter specifies the request object to control.
+ * @isci_host: This parameter specifies the ISCI host object
+ * @isci_device: This is the device to which the request is pending.
+ * @aborted_io_completion: This is a completion structure that will be added to
+ * the request in case it is changed to aborting; this completion is
+ * triggered when the request is fully completed.
+ *
+ * Either "started" on successful change of the task status to "aborted", or
+ * "unallocated" if the task cannot be controlled.
+ */
+static enum isci_request_status isci_task_validate_request_to_abort(
+ struct isci_request *isci_request,
+ struct isci_host *isci_host,
+ struct isci_remote_device *isci_device,
+ struct completion *aborted_io_completion)
+{
+ enum isci_request_status old_state = unallocated;
+
+ /* Only abort the task if it's in the
+ * device's request_in_process list
+ */
+ if (isci_request && !list_empty(&isci_request->dev_node)) {
+ old_state = isci_request_change_started_to_aborted(
+ isci_request, aborted_io_completion);
+
+ }
+
+ return old_state;
+}
+
+/**
+* isci_request_cleanup_completed_loiterer() - This function will take care of
+* the final cleanup on any request which has been explicitly terminated.
+* @isci_host: This parameter specifies the ISCI host object
+* @isci_device: This is the device to which the request is pending.
+* @isci_request: This parameter specifies the terminated request object.
+* @task: This parameter is the libsas I/O request.
+*/
+static void isci_request_cleanup_completed_loiterer(
+ struct isci_host *isci_host,
+ struct isci_remote_device *isci_device,
+ struct isci_request *isci_request,
+ struct sas_task *task)
+{
+ unsigned long flags;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_device=%p, request=%p, task=%p\n",
+ __func__, isci_device, isci_request, task);
+
+ if (task != NULL) {
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->lldd_task = NULL;
+
+ task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET;
+
+ isci_set_task_doneflags(task);
+
+ /* If this task is not in the abort path, call task_done. */
+ if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ task->task_done(task);
+ } else
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ }
+
+ if (isci_request != NULL) {
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+ list_del_init(&isci_request->dev_node);
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+ }
+}
+
+/**
+ * isci_terminate_request_core() - This function will terminate the given
+ * request, and wait for it to complete. This function must only be called
+ * from a thread that can wait. Note that the request is terminated and
+ * completed (back to the host, if started there).
+ * @ihost: This SCU.
+ * @idev: The target.
+ * @isci_request: The I/O request to be terminated.
+ *
+ */
+static void isci_terminate_request_core(struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *isci_request)
+{
+ enum sci_status status = SCI_SUCCESS;
+ bool was_terminated = false;
+ bool needs_cleanup_handling = false;
+ enum isci_request_status request_status;
+ unsigned long flags;
+ unsigned long termination_completed = 1;
+ struct completion *io_request_completion;
+ struct sas_task *task;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: device = %p; request = %p\n",
+ __func__, idev, isci_request);
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+
+ io_request_completion = isci_request->io_request_completion;
+
+ task = (isci_request->ttype == io_task)
+ ? isci_request_access_task(isci_request)
+ : NULL;
+
+ /* Note that we are not going to control
+ * the target to abort the request.
+ */
+ set_bit(IREQ_COMPLETE_IN_TARGET, &isci_request->flags);
+
+ /* Make sure the request wasn't just sitting around signalling
+ * device condition (if the request handle is NULL, then the
+ * request completed but needed additional handling here).
+ */
+ if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) {
+ was_terminated = true;
+ needs_cleanup_handling = true;
+ status = sci_controller_terminate_request(ihost,
+ idev,
+ isci_request);
+ }
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ /*
+ * The only time the request to terminate will
+ * fail is when the io request is completed and
+ * being aborted.
+ */
+ if (status != SCI_SUCCESS) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: sci_controller_terminate_request"
+ " returned = 0x%x\n",
+ __func__, status);
+
+ isci_request->io_request_completion = NULL;
+
+ } else {
+ if (was_terminated) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: before completion wait (%p/%p)\n",
+ __func__, isci_request, io_request_completion);
+
+ /* Wait here for the request to complete. */
+ #define TERMINATION_TIMEOUT_MSEC 500
+ termination_completed
+ = wait_for_completion_timeout(
+ io_request_completion,
+ msecs_to_jiffies(TERMINATION_TIMEOUT_MSEC));
+
+ if (!termination_completed) {
+
+ /* The request to terminate has timed out. */
+ spin_lock_irqsave(&ihost->scic_lock,
+ flags);
+
+ /* Check for state changes. */
+ if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) {
+
+ /* The best we can do is to have the
+ * request die a silent death if it
+ * ever really completes.
+ *
+ * Set the request state to "dead",
+ * and clear the task pointer so that
+ * an actual completion event callback
+ * doesn't do anything.
+ */
+ isci_request->status = dead;
+ isci_request->io_request_completion
+ = NULL;
+
+ if (isci_request->ttype == io_task) {
+
+ /* Break links with the
+ * sas_task.
+ */
+ isci_request->ttype_ptr.io_task_ptr
+ = NULL;
+ }
+ } else
+ termination_completed = 1;
+
+ spin_unlock_irqrestore(&ihost->scic_lock,
+ flags);
+
+ if (!termination_completed) {
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: *** Timeout waiting for "
+ "termination(%p/%p)\n",
+ __func__, io_request_completion,
+ isci_request);
+
+ /* The request can no longer be referenced
+ * safely since it may go away if the
+ * termination every really does complete.
+ */
+ isci_request = NULL;
+ }
+ }
+ if (termination_completed)
+ dev_dbg(&ihost->pdev->dev,
+ "%s: after completion wait (%p/%p)\n",
+ __func__, isci_request, io_request_completion);
+ }
+
+ if (termination_completed) {
+
+ isci_request->io_request_completion = NULL;
+
+ /* Peek at the status of the request. This will tell
+ * us if there was special handling on the request such that it
+ * needs to be detached and freed here.
+ */
+ spin_lock_irqsave(&isci_request->state_lock, flags);
+ request_status = isci_request->status;
+
+ if ((isci_request->ttype == io_task) /* TMFs are in their own thread */
+ && ((request_status == aborted)
+ || (request_status == aborting)
+ || (request_status == terminating)
+ || (request_status == completed)
+ || (request_status == dead)
+ )
+ ) {
+
+ /* The completion routine won't free a request in
+ * the aborted/aborting/etc. states, so we do
+ * it here.
+ */
+ needs_cleanup_handling = true;
+ }
+ spin_unlock_irqrestore(&isci_request->state_lock, flags);
+
+ }
+ if (needs_cleanup_handling)
+ isci_request_cleanup_completed_loiterer(
+ ihost, idev, isci_request, task);
+ }
+}
+
+/**
+ * isci_terminate_pending_requests() - This function will change the all of the
+ * requests on the given device's state to "aborting", will terminate the
+ * requests, and wait for them to complete. This function must only be
+ * called from a thread that can wait. Note that the requests are all
+ * terminated and completed (back to the host, if started there).
+ * @isci_host: This parameter specifies SCU.
+ * @idev: This parameter specifies the target.
+ *
+ */
+void isci_terminate_pending_requests(struct isci_host *ihost,
+ struct isci_remote_device *idev)
+{
+ struct completion request_completion;
+ enum isci_request_status old_state;
+ unsigned long flags;
+ LIST_HEAD(list);
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ list_splice_init(&idev->reqs_in_process, &list);
+
+ /* assumes that isci_terminate_request_core deletes from the list */
+ while (!list_empty(&list)) {
+ struct isci_request *ireq = list_entry(list.next, typeof(*ireq), dev_node);
+
+ /* Change state to "terminating" if it is currently
+ * "started".
+ */
+ old_state = isci_request_change_started_to_newstate(ireq,
+ &request_completion,
+ terminating);
+ switch (old_state) {
+ case started:
+ case completed:
+ case aborting:
+ break;
+ default:
+ /* termination in progress, or otherwise dispositioned.
+ * We know the request was on 'list' so should be safe
+ * to move it back to reqs_in_process
+ */
+ list_move(&ireq->dev_node, &idev->reqs_in_process);
+ ireq = NULL;
+ break;
+ }
+
+ if (!ireq)
+ continue;
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ init_completion(&request_completion);
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: idev=%p request=%p; task=%p old_state=%d\n",
+ __func__, idev, ireq,
+ ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL,
+ old_state);
+
+ /* If the old_state is started:
+ * This request was not already being aborted. If it had been,
+ * then the aborting I/O (ie. the TMF request) would not be in
+ * the aborting state, and thus would be terminated here. Note
+ * that since the TMF completion's call to the kernel function
+ * "complete()" does not happen until the pending I/O request
+ * terminate fully completes, we do not have to implement a
+ * special wait here for already aborting requests - the
+ * termination of the TMF request will force the request
+ * to finish it's already started terminate.
+ *
+ * If old_state == completed:
+ * This request completed from the SCU hardware perspective
+ * and now just needs cleaning up in terms of freeing the
+ * request and potentially calling up to libsas.
+ *
+ * If old_state == aborting:
+ * This request has already gone through a TMF timeout, but may
+ * not have been terminated; needs cleaning up at least.
+ */
+ isci_terminate_request_core(ihost, idev, ireq);
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ }
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+}
+
+/**
+ * isci_task_send_lu_reset_sas() - This function is called by of the SAS Domain
+ * Template functions.
+ * @lun: This parameter specifies the lun to be reset.
+ *
+ * status, zero indicates success.
+ */
+static int isci_task_send_lu_reset_sas(
+ struct isci_host *isci_host,
+ struct isci_remote_device *isci_device,
+ u8 *lun)
+{
+ struct isci_tmf tmf;
+ int ret = TMF_RESP_FUNC_FAILED;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_host = %p, isci_device = %p\n",
+ __func__, isci_host, isci_device);
+ /* Send the LUN reset to the target. By the time the call returns,
+ * the TMF has fully exected in the target (in which case the return
+ * value is "TMF_RESP_FUNC_COMPLETE", or the request timed-out (or
+ * was otherwise unable to be executed ("TMF_RESP_FUNC_FAILED").
+ */
+ isci_task_build_tmf(&tmf, isci_tmf_ssp_lun_reset, NULL, NULL);
+
+ #define ISCI_LU_RESET_TIMEOUT_MS 2000 /* 2 second timeout. */
+ ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, ISCI_LU_RESET_TIMEOUT_MS);
+
+ if (ret == TMF_RESP_FUNC_COMPLETE)
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: %p: TMF_LU_RESET passed\n",
+ __func__, isci_device);
+ else
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: %p: TMF_LU_RESET failed (%x)\n",
+ __func__, isci_device, ret);
+
+ return ret;
+}
+
+static int isci_task_send_lu_reset_sata(struct isci_host *ihost,
+ struct isci_remote_device *idev, u8 *lun)
+{
+ int ret = TMF_RESP_FUNC_FAILED;
+ struct isci_tmf tmf;
+
+ /* Send the soft reset to the target */
+ #define ISCI_SRST_TIMEOUT_MS 25000 /* 25 second timeout. */
+ isci_task_build_tmf(&tmf, isci_tmf_sata_srst_high, NULL, NULL);
+
+ ret = isci_task_execute_tmf(ihost, idev, &tmf, ISCI_SRST_TIMEOUT_MS);
+
+ if (ret != TMF_RESP_FUNC_COMPLETE) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: Assert SRST failed (%p) = %x",
+ __func__, idev, ret);
+
+ /* Return the failure so that the LUN reset is escalated
+ * to a target reset.
+ */
+ }
+ return ret;
+}
+
+/**
+ * isci_task_lu_reset() - This function is one of the SAS Domain Template
+ * functions. This is one of the Task Management functoins called by libsas,
+ * to reset the given lun. Note the assumption that while this call is
+ * executing, no I/O will be sent by the host to the device.
+ * @lun: This parameter specifies the lun to be reset.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun)
+{
+ struct isci_host *isci_host = dev_to_ihost(domain_device);
+ struct isci_remote_device *isci_device;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+ isci_device = isci_lookup_device(domain_device);
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: domain_device=%p, isci_host=%p; isci_device=%p\n",
+ __func__, domain_device, isci_host, isci_device);
+
+ if (isci_device)
+ set_bit(IDEV_EH, &isci_device->flags);
+
+ /* If there is a device reset pending on any request in the
+ * device's list, fail this LUN reset request in order to
+ * escalate to the device reset.
+ */
+ if (!isci_device ||
+ isci_device_is_reset_pending(isci_host, isci_device)) {
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: No dev (%p), or "
+ "RESET PENDING: domain_device=%p\n",
+ __func__, isci_device, domain_device);
+ ret = TMF_RESP_FUNC_FAILED;
+ goto out;
+ }
+
+ /* Send the task management part of the reset. */
+ if (sas_protocol_ata(domain_device->tproto)) {
+ ret = isci_task_send_lu_reset_sata(isci_host, isci_device, lun);
+ } else
+ ret = isci_task_send_lu_reset_sas(isci_host, isci_device, lun);
+
+ /* If the LUN reset worked, all the I/O can now be terminated. */
+ if (ret == TMF_RESP_FUNC_COMPLETE)
+ /* Terminate all I/O now. */
+ isci_terminate_pending_requests(isci_host,
+ isci_device);
+
+ out:
+ isci_put_device(isci_device);
+ return ret;
+}
+
+
+/* int (*lldd_clear_nexus_port)(struct asd_sas_port *); */
+int isci_task_clear_nexus_port(struct asd_sas_port *port)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
+
+
+int isci_task_clear_nexus_ha(struct sas_ha_struct *ha)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
+/* Task Management Functions. Must be called from process context. */
+
+/**
+ * isci_abort_task_process_cb() - This is a helper function for the abort task
+ * TMF command. It manages the request state with respect to the successful
+ * transmission / completion of the abort task request.
+ * @cb_state: This parameter specifies when this function was called - after
+ * the TMF request has been started and after it has timed-out.
+ * @tmf: This parameter specifies the TMF in progress.
+ *
+ *
+ */
+static void isci_abort_task_process_cb(
+ enum isci_tmf_cb_state cb_state,
+ struct isci_tmf *tmf,
+ void *cb_data)
+{
+ struct isci_request *old_request;
+
+ old_request = (struct isci_request *)cb_data;
+
+ dev_dbg(&old_request->isci_host->pdev->dev,
+ "%s: tmf=%p, old_request=%p\n",
+ __func__, tmf, old_request);
+
+ switch (cb_state) {
+
+ case isci_tmf_started:
+ /* The TMF has been started. Nothing to do here, since the
+ * request state was already set to "aborted" by the abort
+ * task function.
+ */
+ if ((old_request->status != aborted)
+ && (old_request->status != completed))
+ dev_dbg(&old_request->isci_host->pdev->dev,
+ "%s: Bad request status (%d): tmf=%p, old_request=%p\n",
+ __func__, old_request->status, tmf, old_request);
+ break;
+
+ case isci_tmf_timed_out:
+
+ /* Set the task's state to "aborting", since the abort task
+ * function thread set it to "aborted" (above) in anticipation
+ * of the task management request working correctly. Since the
+ * timeout has now fired, the TMF request failed. We set the
+ * state such that the request completion will indicate the
+ * device is no longer present.
+ */
+ isci_request_change_state(old_request, aborting);
+ break;
+
+ default:
+ dev_dbg(&old_request->isci_host->pdev->dev,
+ "%s: Bad cb_state (%d): tmf=%p, old_request=%p\n",
+ __func__, cb_state, tmf, old_request);
+ break;
+ }
+}
+
+/**
+ * isci_task_abort_task() - This function is one of the SAS Domain Template
+ * functions. This function is called by libsas to abort a specified task.
+ * @task: This parameter specifies the SAS task to abort.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_abort_task(struct sas_task *task)
+{
+ struct isci_host *isci_host = dev_to_ihost(task->dev);
+ DECLARE_COMPLETION_ONSTACK(aborted_io_completion);
+ struct isci_request *old_request = NULL;
+ enum isci_request_status old_state;
+ struct isci_remote_device *isci_device = NULL;
+ struct isci_tmf tmf;
+ int ret = TMF_RESP_FUNC_FAILED;
+ unsigned long flags;
+ bool any_dev_reset = false;
+
+ /* Get the isci_request reference from the task. Note that
+ * this check does not depend on the pending request list
+ * in the device, because tasks driving resets may land here
+ * after completion in the core.
+ */
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+ spin_lock(&task->task_state_lock);
+
+ old_request = task->lldd_task;
+
+ /* If task is already done, the request isn't valid */
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE) &&
+ (task->task_state_flags & SAS_TASK_AT_INITIATOR) &&
+ old_request)
+ isci_device = isci_lookup_device(task->dev);
+
+ spin_unlock(&task->task_state_lock);
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: task = %p\n", __func__, task);
+
+ if (!isci_device || !old_request)
+ goto out;
+
+ set_bit(IDEV_EH, &isci_device->flags);
+
+ /* This version of the driver will fail abort requests for
+ * SATA/STP. Failing the abort request this way will cause the
+ * SCSI error handler thread to escalate to LUN reset
+ */
+ if (sas_protocol_ata(task->task_proto)) {
+ dev_dbg(&isci_host->pdev->dev,
+ " task %p is for a STP/SATA device;"
+ " returning TMF_RESP_FUNC_FAILED\n"
+ " to cause a LUN reset...\n", task);
+ goto out;
+ }
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: old_request == %p\n", __func__, old_request);
+
+ any_dev_reset = isci_device_is_reset_pending(isci_host, isci_device);
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+
+ any_dev_reset = any_dev_reset || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET);
+
+ /* If the extraction of the request reference from the task
+ * failed, then the request has been completed (or if there is a
+ * pending reset then this abort request function must be failed
+ * in order to escalate to the target reset).
+ */
+ if ((old_request == NULL) || any_dev_reset) {
+
+ /* If the device reset task flag is set, fail the task
+ * management request. Otherwise, the original request
+ * has completed.
+ */
+ if (any_dev_reset) {
+
+ /* Turn off the task's DONE to make sure this
+ * task is escalated to a target reset.
+ */
+ task->task_state_flags &= ~SAS_TASK_STATE_DONE;
+
+ /* Make the reset happen as soon as possible. */
+ task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
+
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ /* Fail the task management request in order to
+ * escalate to the target reset.
+ */
+ ret = TMF_RESP_FUNC_FAILED;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: Failing task abort in order to "
+ "escalate to target reset because\n"
+ "SAS_TASK_NEED_DEV_RESET is set for "
+ "task %p on dev %p\n",
+ __func__, task, isci_device);
+
+
+ } else {
+ /* The request has already completed and there
+ * is nothing to do here other than to set the task
+ * done bit, and indicate that the task abort function
+ * was sucessful.
+ */
+ isci_set_task_doneflags(task);
+
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ ret = TMF_RESP_FUNC_COMPLETE;
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: abort task not needed for %p\n",
+ __func__, task);
+ }
+ goto out;
+ } else {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ }
+
+ spin_lock_irqsave(&isci_host->scic_lock, flags);
+
+ /* Check the request status and change to "aborted" if currently
+ * "starting"; if true then set the I/O kernel completion
+ * struct that will be triggered when the request completes.
+ */
+ old_state = isci_task_validate_request_to_abort(
+ old_request, isci_host, isci_device,
+ &aborted_io_completion);
+ if ((old_state != started) &&
+ (old_state != completed) &&
+ (old_state != aborting)) {
+
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ /* The request was already being handled by someone else (because
+ * they got to set the state away from started).
+ */
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: device = %p; old_request %p already being aborted\n",
+ __func__,
+ isci_device, old_request);
+ ret = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ }
+ if (task->task_proto == SAS_PROTOCOL_SMP ||
+ test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) {
+
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: SMP request (%d)"
+ " or complete_in_target (%d), thus no TMF\n",
+ __func__, (task->task_proto == SAS_PROTOCOL_SMP),
+ test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags));
+
+ /* Set the state on the task. */
+ isci_task_all_done(task);
+
+ ret = TMF_RESP_FUNC_COMPLETE;
+
+ /* Stopping and SMP devices are not sent a TMF, and are not
+ * reset, but the outstanding I/O request is terminated below.
+ */
+ } else {
+ /* Fill in the tmf stucture */
+ isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort,
+ isci_abort_task_process_cb,
+ old_request);
+
+ spin_unlock_irqrestore(&isci_host->scic_lock, flags);
+
+ #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */
+ ret = isci_task_execute_tmf(isci_host, isci_device, &tmf,
+ ISCI_ABORT_TASK_TIMEOUT_MS);
+
+ if (ret != TMF_RESP_FUNC_COMPLETE)
+ dev_dbg(&isci_host->pdev->dev,
+ "%s: isci_task_send_tmf failed\n",
+ __func__);
+ }
+ if (ret == TMF_RESP_FUNC_COMPLETE) {
+ set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags);
+
+ /* Clean up the request on our side, and wait for the aborted
+ * I/O to complete.
+ */
+ isci_terminate_request_core(isci_host, isci_device, old_request);
+ }
+
+ /* Make sure we do not leave a reference to aborted_io_completion */
+ old_request->io_request_completion = NULL;
+ out:
+ isci_put_device(isci_device);
+ return ret;
+}
+
+/**
+ * isci_task_abort_task_set() - This function is one of the SAS Domain Template
+ * functions. This is one of the Task Management functoins called by libsas,
+ * to abort all task for the given lun.
+ * @d_device: This parameter specifies the domain device associated with this
+ * request.
+ * @lun: This parameter specifies the lun associated with this request.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_abort_task_set(
+ struct domain_device *d_device,
+ u8 *lun)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
+
+/**
+ * isci_task_clear_aca() - This function is one of the SAS Domain Template
+ * functions. This is one of the Task Management functoins called by libsas.
+ * @d_device: This parameter specifies the domain device associated with this
+ * request.
+ * @lun: This parameter specifies the lun associated with this request.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_clear_aca(
+ struct domain_device *d_device,
+ u8 *lun)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
+
+
+/**
+ * isci_task_clear_task_set() - This function is one of the SAS Domain Template
+ * functions. This is one of the Task Management functoins called by libsas.
+ * @d_device: This parameter specifies the domain device associated with this
+ * request.
+ * @lun: This parameter specifies the lun associated with this request.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_clear_task_set(
+ struct domain_device *d_device,
+ u8 *lun)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
+
+/**
+ * isci_task_query_task() - This function is implemented to cause libsas to
+ * correctly escalate the failed abort to a LUN or target reset (this is
+ * because sas_scsi_find_task libsas function does not correctly interpret
+ * all return codes from the abort task call). When TMF_RESP_FUNC_SUCC is
+ * returned, libsas turns this into a LUN reset; when FUNC_FAILED is
+ * returned, libsas will turn this into a target reset
+ * @task: This parameter specifies the sas task being queried.
+ * @lun: This parameter specifies the lun associated with this request.
+ *
+ * status, zero indicates success.
+ */
+int isci_task_query_task(
+ struct sas_task *task)
+{
+ /* See if there is a pending device reset for this device. */
+ if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET)
+ return TMF_RESP_FUNC_FAILED;
+ else
+ return TMF_RESP_FUNC_SUCC;
+}
+
+/*
+ * isci_task_request_complete() - This function is called by the sci core when
+ * an task request completes.
+ * @ihost: This parameter specifies the ISCI host object
+ * @ireq: This parameter is the completed isci_request object.
+ * @completion_status: This parameter specifies the completion status from the
+ * sci core.
+ *
+ * none.
+ */
+void
+isci_task_request_complete(struct isci_host *ihost,
+ struct isci_request *ireq,
+ enum sci_task_status completion_status)
+{
+ struct isci_tmf *tmf = isci_request_access_tmf(ireq);
+ struct completion *tmf_complete;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: request = %p, status=%d\n",
+ __func__, ireq, completion_status);
+
+ isci_request_change_state(ireq, completed);
+
+ tmf->status = completion_status;
+ set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags);
+
+ if (tmf->proto == SAS_PROTOCOL_SSP) {
+ memcpy(&tmf->resp.resp_iu,
+ &ireq->ssp.rsp,
+ SSP_RESP_IU_MAX_SIZE);
+ } else if (tmf->proto == SAS_PROTOCOL_SATA) {
+ memcpy(&tmf->resp.d2h_fis,
+ &ireq->stp.rsp,
+ sizeof(struct dev_to_host_fis));
+ }
+
+ /* PRINT_TMF( ((struct isci_tmf *)request->task)); */
+ tmf_complete = tmf->complete;
+
+ sci_controller_complete_io(ihost, ireq->target_device, ireq);
+ /* set the 'terminated' flag handle to make sure it cannot be terminated
+ * or completed again.
+ */
+ set_bit(IREQ_TERMINATED, &ireq->flags);
+
+ isci_request_change_state(ireq, unallocated);
+ list_del_init(&ireq->dev_node);
+
+ /* The task management part completes last. */
+ complete(tmf_complete);
+}
+
+static void isci_smp_task_timedout(unsigned long _task)
+{
+ struct sas_task *task = (void *) _task;
+ unsigned long flags;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ complete(&task->completion);
+}
+
+static void isci_smp_task_done(struct sas_task *task)
+{
+ if (!del_timer(&task->timer))
+ return;
+ complete(&task->completion);
+}
+
+static struct sas_task *isci_alloc_task(void)
+{
+ struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL);
+
+ if (task) {
+ INIT_LIST_HEAD(&task->list);
+ spin_lock_init(&task->task_state_lock);
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ init_timer(&task->timer);
+ init_completion(&task->completion);
+ }
+
+ return task;
+}
+
+static void isci_free_task(struct isci_host *ihost, struct sas_task *task)
+{
+ if (task) {
+ BUG_ON(!list_empty(&task->list));
+ kfree(task);
+ }
+}
+
+static int isci_smp_execute_task(struct isci_host *ihost,
+ struct domain_device *dev, void *req,
+ int req_size, void *resp, int resp_size)
+{
+ int res, retry;
+ struct sas_task *task = NULL;
+
+ for (retry = 0; retry < 3; retry++) {
+ task = isci_alloc_task();
+ if (!task)
+ return -ENOMEM;
+
+ task->dev = dev;
+ task->task_proto = dev->tproto;
+ sg_init_one(&task->smp_task.smp_req, req, req_size);
+ sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
+
+ task->task_done = isci_smp_task_done;
+
+ task->timer.data = (unsigned long) task;
+ task->timer.function = isci_smp_task_timedout;
+ task->timer.expires = jiffies + 10*HZ;
+ add_timer(&task->timer);
+
+ res = isci_task_execute_task(task, 1, GFP_KERNEL);
+
+ if (res) {
+ del_timer(&task->timer);
+ dev_dbg(&ihost->pdev->dev,
+ "%s: executing SMP task failed:%d\n",
+ __func__, res);
+ goto ex_err;
+ }
+
+ wait_for_completion(&task->completion);
+ res = -ECOMM;
+ if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: smp task timed out or aborted\n",
+ __func__);
+ isci_task_abort_task(task);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: SMP task aborted and not done\n",
+ __func__);
+ goto ex_err;
+ }
+ }
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAM_STAT_GOOD) {
+ res = 0;
+ break;
+ }
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_UNDERRUN) {
+ /* no error, but return the number of bytes of
+ * underrun */
+ res = task->task_status.residual;
+ break;
+ }
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_OVERRUN) {
+ res = -EMSGSIZE;
+ break;
+ } else {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: task to dev %016llx response: 0x%x "
+ "status 0x%x\n", __func__,
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
+ isci_free_task(ihost, task);
+ task = NULL;
+ }
+ }
+ex_err:
+ BUG_ON(retry == 3 && task != NULL);
+ isci_free_task(ihost, task);
+ return res;
+}
+
+#define DISCOVER_REQ_SIZE 16
+#define DISCOVER_RESP_SIZE 56
+
+int isci_smp_get_phy_attached_dev_type(struct isci_host *ihost,
+ struct domain_device *dev,
+ int phy_id, int *adt)
+{
+ struct smp_resp *disc_resp;
+ u8 *disc_req;
+ int res;
+
+ disc_resp = kzalloc(DISCOVER_RESP_SIZE, GFP_KERNEL);
+ if (!disc_resp)
+ return -ENOMEM;
+
+ disc_req = kzalloc(DISCOVER_REQ_SIZE, GFP_KERNEL);
+ if (disc_req) {
+ disc_req[0] = SMP_REQUEST;
+ disc_req[1] = SMP_DISCOVER;
+ disc_req[9] = phy_id;
+ } else {
+ kfree(disc_resp);
+ return -ENOMEM;
+ }
+ res = isci_smp_execute_task(ihost, dev, disc_req, DISCOVER_REQ_SIZE,
+ disc_resp, DISCOVER_RESP_SIZE);
+ if (!res) {
+ if (disc_resp->result != SMP_RESP_FUNC_ACC)
+ res = disc_resp->result;
+ else
+ *adt = disc_resp->disc.attached_dev_type;
+ }
+ kfree(disc_req);
+ kfree(disc_resp);
+
+ return res;
+}
+
+static void isci_wait_for_smp_phy_reset(struct isci_remote_device *idev, int phy_num)
+{
+ struct domain_device *dev = idev->domain_dev;
+ struct isci_port *iport = idev->isci_port;
+ struct isci_host *ihost = iport->isci_host;
+ int res, iteration = 0, attached_device_type;
+ #define STP_WAIT_MSECS 25000
+ unsigned long tmo = msecs_to_jiffies(STP_WAIT_MSECS);
+ unsigned long deadline = jiffies + tmo;
+ enum {
+ SMP_PHYWAIT_PHYDOWN,
+ SMP_PHYWAIT_PHYUP,
+ SMP_PHYWAIT_DONE
+ } phy_state = SMP_PHYWAIT_PHYDOWN;
+
+ /* While there is time, wait for the phy to go away and come back */
+ while (time_is_after_jiffies(deadline) && phy_state != SMP_PHYWAIT_DONE) {
+ int event = atomic_read(&iport->event);
+
+ ++iteration;
+
+ tmo = wait_event_timeout(ihost->eventq,
+ event != atomic_read(&iport->event) ||
+ !test_bit(IPORT_BCN_BLOCKED, &iport->flags),
+ tmo);
+ /* link down, stop polling */
+ if (!test_bit(IPORT_BCN_BLOCKED, &iport->flags))
+ break;
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: iport %p, iteration %d,"
+ " phase %d: time_remaining %lu, bcns = %d\n",
+ __func__, iport, iteration, phy_state,
+ tmo, test_bit(IPORT_BCN_PENDING, &iport->flags));
+
+ res = isci_smp_get_phy_attached_dev_type(ihost, dev, phy_num,
+ &attached_device_type);
+ tmo = deadline - jiffies;
+
+ if (res) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: iteration %d, phase %d:"
+ " SMP error=%d, time_remaining=%lu\n",
+ __func__, iteration, phy_state, res, tmo);
+ break;
+ }
+ dev_dbg(&ihost->pdev->dev,
+ "%s: iport %p, iteration %d,"
+ " phase %d: time_remaining %lu, bcns = %d, "
+ "attdevtype = %x\n",
+ __func__, iport, iteration, phy_state,
+ tmo, test_bit(IPORT_BCN_PENDING, &iport->flags),
+ attached_device_type);
+
+ switch (phy_state) {
+ case SMP_PHYWAIT_PHYDOWN:
+ /* Has the device gone away? */
+ if (!attached_device_type)
+ phy_state = SMP_PHYWAIT_PHYUP;
+
+ break;
+
+ case SMP_PHYWAIT_PHYUP:
+ /* Has the device come back? */
+ if (attached_device_type)
+ phy_state = SMP_PHYWAIT_DONE;
+ break;
+
+ case SMP_PHYWAIT_DONE:
+ break;
+ }
+
+ }
+ dev_dbg(&ihost->pdev->dev, "%s: done\n", __func__);
+}
+
+static int isci_reset_device(struct isci_host *ihost,
+ struct isci_remote_device *idev)
+{
+ struct sas_phy *phy = sas_find_local_phy(idev->domain_dev);
+ struct isci_port *iport = idev->isci_port;
+ enum sci_status status;
+ unsigned long flags;
+ int rc;
+
+ dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev);
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ status = sci_remote_device_reset(idev);
+ if (status != SCI_SUCCESS) {
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ dev_dbg(&ihost->pdev->dev,
+ "%s: sci_remote_device_reset(%p) returned %d!\n",
+ __func__, idev, status);
+
+ return TMF_RESP_FUNC_FAILED;
+ }
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ /* Make sure all pending requests are able to be fully terminated. */
+ isci_device_clear_reset_pending(ihost, idev);
+
+ /* If this is a device on an expander, disable BCN processing. */
+ if (!scsi_is_sas_phy_local(phy))
+ set_bit(IPORT_BCN_BLOCKED, &iport->flags);
+
+ rc = sas_phy_reset(phy, true);
+
+ /* Terminate in-progress I/O now. */
+ isci_remote_device_nuke_requests(ihost, idev);
+
+ /* Since all pending TCs have been cleaned, resume the RNC. */
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ status = sci_remote_device_reset_complete(idev);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ /* If this is a device on an expander, bring the phy back up. */
+ if (!scsi_is_sas_phy_local(phy)) {
+ /* A phy reset will cause the device to go away then reappear.
+ * Since libsas will take action on incoming BCNs (eg. remove
+ * a device going through an SMP phy-control driven reset),
+ * we need to wait until the phy comes back up before letting
+ * discovery proceed in libsas.
+ */
+ isci_wait_for_smp_phy_reset(idev, phy->number);
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ isci_port_bcn_enable(ihost, idev->isci_port);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ }
+
+ if (status != SCI_SUCCESS) {
+ dev_dbg(&ihost->pdev->dev,
+ "%s: sci_remote_device_reset_complete(%p) "
+ "returned %d!\n", __func__, idev, status);
+ }
+
+ dev_dbg(&ihost->pdev->dev, "%s: idev %p complete.\n", __func__, idev);
+
+ return rc;
+}
+
+int isci_task_I_T_nexus_reset(struct domain_device *dev)
+{
+ struct isci_host *ihost = dev_to_ihost(dev);
+ struct isci_remote_device *idev;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ idev = isci_lookup_device(dev);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ if (!idev || !test_bit(IDEV_EH, &idev->flags)) {
+ ret = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ }
+
+ ret = isci_reset_device(ihost, idev);
+ out:
+ isci_put_device(idev);
+ return ret;
+}
+
+int isci_bus_reset_handler(struct scsi_cmnd *cmd)
+{
+ struct domain_device *dev = sdev_to_domain_dev(cmd->device);
+ struct isci_host *ihost = dev_to_ihost(dev);
+ struct isci_remote_device *idev;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ idev = isci_lookup_device(dev);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+
+ if (!idev) {
+ ret = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ }
+
+ ret = isci_reset_device(ihost, idev);
+ out:
+ isci_put_device(idev);
+ return ret;
+}
diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h
new file mode 100644
index 0000000..4a7fa90
--- /dev/null
+++ b/drivers/scsi/isci/task.h
@@ -0,0 +1,367 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _ISCI_TASK_H_
+#define _ISCI_TASK_H_
+
+#include <scsi/sas_ata.h>
+#include "host.h"
+
+struct isci_request;
+
+/**
+ * enum isci_tmf_cb_state - This enum defines the possible states in which the
+ * TMF callback function is invoked during the TMF execution process.
+ *
+ *
+ */
+enum isci_tmf_cb_state {
+
+ isci_tmf_init_state = 0,
+ isci_tmf_started,
+ isci_tmf_timed_out
+};
+
+/**
+ * enum isci_tmf_function_codes - This enum defines the possible preparations
+ * of task management requests.
+ *
+ *
+ */
+enum isci_tmf_function_codes {
+
+ isci_tmf_func_none = 0,
+ isci_tmf_ssp_task_abort = TMF_ABORT_TASK,
+ isci_tmf_ssp_lun_reset = TMF_LU_RESET,
+ isci_tmf_sata_srst_high = TMF_LU_RESET + 0x100, /* Non SCSI */
+ isci_tmf_sata_srst_low = TMF_LU_RESET + 0x101 /* Non SCSI */
+};
+/**
+ * struct isci_tmf - This class represents the task management object which
+ * acts as an interface to libsas for processing task management requests
+ *
+ *
+ */
+struct isci_tmf {
+
+ struct completion *complete;
+ enum sas_protocol proto;
+ union {
+ struct ssp_response_iu resp_iu;
+ struct dev_to_host_fis d2h_fis;
+ u8 rsp_buf[SSP_RESP_IU_MAX_SIZE];
+ } resp;
+ unsigned char lun[8];
+ u16 io_tag;
+ struct isci_remote_device *device;
+ enum isci_tmf_function_codes tmf_code;
+ int status;
+
+ /* The optional callback function allows the user process to
+ * track the TMF transmit / timeout conditions.
+ */
+ void (*cb_state_func)(
+ enum isci_tmf_cb_state,
+ struct isci_tmf *, void *);
+ void *cb_data;
+
+};
+
+static inline void isci_print_tmf(struct isci_tmf *tmf)
+{
+ if (SAS_PROTOCOL_SATA == tmf->proto)
+ dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev,
+ "%s: status = %x\n"
+ "tmf->resp.d2h_fis.status = %x\n"
+ "tmf->resp.d2h_fis.error = %x\n",
+ __func__,
+ tmf->status,
+ tmf->resp.d2h_fis.status,
+ tmf->resp.d2h_fis.error);
+ else
+ dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev,
+ "%s: status = %x\n"
+ "tmf->resp.resp_iu.data_present = %x\n"
+ "tmf->resp.resp_iu.status = %x\n"
+ "tmf->resp.resp_iu.data_length = %x\n"
+ "tmf->resp.resp_iu.data[0] = %x\n"
+ "tmf->resp.resp_iu.data[1] = %x\n"
+ "tmf->resp.resp_iu.data[2] = %x\n"
+ "tmf->resp.resp_iu.data[3] = %x\n",
+ __func__,
+ tmf->status,
+ tmf->resp.resp_iu.datapres,
+ tmf->resp.resp_iu.status,
+ be32_to_cpu(tmf->resp.resp_iu.response_data_len),
+ tmf->resp.resp_iu.resp_data[0],
+ tmf->resp.resp_iu.resp_data[1],
+ tmf->resp.resp_iu.resp_data[2],
+ tmf->resp.resp_iu.resp_data[3]);
+}
+
+
+int isci_task_execute_task(
+ struct sas_task *task,
+ int num,
+ gfp_t gfp_flags);
+
+int isci_task_abort_task(
+ struct sas_task *task);
+
+int isci_task_abort_task_set(
+ struct domain_device *d_device,
+ u8 *lun);
+
+int isci_task_clear_aca(
+ struct domain_device *d_device,
+ u8 *lun);
+
+int isci_task_clear_task_set(
+ struct domain_device *d_device,
+ u8 *lun);
+
+int isci_task_query_task(
+ struct sas_task *task);
+
+int isci_task_lu_reset(
+ struct domain_device *d_device,
+ u8 *lun);
+
+int isci_task_clear_nexus_port(
+ struct asd_sas_port *port);
+
+int isci_task_clear_nexus_ha(
+ struct sas_ha_struct *ha);
+
+int isci_task_I_T_nexus_reset(
+ struct domain_device *d_device);
+
+void isci_task_request_complete(
+ struct isci_host *isci_host,
+ struct isci_request *request,
+ enum sci_task_status completion_status);
+
+u16 isci_task_ssp_request_get_io_tag_to_manage(
+ struct isci_request *request);
+
+u8 isci_task_ssp_request_get_function(
+ struct isci_request *request);
+
+
+void *isci_task_ssp_request_get_response_data_address(
+ struct isci_request *request);
+
+u32 isci_task_ssp_request_get_response_data_length(
+ struct isci_request *request);
+
+int isci_queuecommand(
+ struct scsi_cmnd *scsi_cmd,
+ void (*donefunc)(struct scsi_cmnd *));
+
+int isci_bus_reset_handler(struct scsi_cmnd *cmd);
+
+/**
+ * enum isci_completion_selection - This enum defines the possible actions to
+ * take with respect to a given request's notification back to libsas.
+ *
+ *
+ */
+enum isci_completion_selection {
+
+ isci_perform_normal_io_completion, /* Normal notify (task_done) */
+ isci_perform_aborted_io_completion, /* No notification. */
+ isci_perform_error_io_completion /* Use sas_task_abort */
+};
+
+static inline void isci_set_task_doneflags(
+ struct sas_task *task)
+{
+ /* Since no futher action will be taken on this task,
+ * make sure to mark it complete from the lldd perspective.
+ */
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+}
+/**
+ * isci_task_all_done() - This function clears the task bits to indicate the
+ * LLDD is done with the task.
+ *
+ *
+ */
+static inline void isci_task_all_done(
+ struct sas_task *task)
+{
+ unsigned long flags;
+
+ /* Since no futher action will be taken on this task,
+ * make sure to mark it complete from the lldd perspective.
+ */
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ isci_set_task_doneflags(task);
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+}
+
+/**
+ * isci_task_set_completion_status() - This function sets the completion status
+ * for the request.
+ * @task: This parameter is the completed request.
+ * @response: This parameter is the response code for the completed task.
+ * @status: This parameter is the status code for the completed task.
+ *
+* @return The new notification mode for the request.
+*/
+static inline enum isci_completion_selection
+isci_task_set_completion_status(
+ struct sas_task *task,
+ enum service_response response,
+ enum exec_status status,
+ enum isci_completion_selection task_notification_selection)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+
+ /* If a device reset is being indicated, make sure the I/O
+ * is in the error path.
+ */
+ if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) {
+ /* Fail the I/O to make sure it goes into the error path. */
+ response = SAS_TASK_UNDELIVERED;
+ status = SAM_STAT_TASK_ABORTED;
+
+ task_notification_selection = isci_perform_error_io_completion;
+ }
+ task->task_status.resp = response;
+ task->task_status.stat = status;
+
+ switch (task_notification_selection) {
+
+ case isci_perform_error_io_completion:
+
+ if (task->task_proto == SAS_PROTOCOL_SMP) {
+ /* There is no error escalation in the SMP case.
+ * Convert to a normal completion to avoid the
+ * timeout in the discovery path and to let the
+ * next action take place quickly.
+ */
+ task_notification_selection
+ = isci_perform_normal_io_completion;
+
+ /* Fall through to the normal case... */
+ } else {
+ /* Use sas_task_abort */
+ /* Leave SAS_TASK_STATE_DONE clear
+ * Leave SAS_TASK_AT_INITIATOR set.
+ */
+ break;
+ }
+
+ case isci_perform_aborted_io_completion:
+ /* This path can occur with task-managed requests as well as
+ * requests terminated because of LUN or device resets.
+ */
+ /* Fall through to the normal case... */
+ case isci_perform_normal_io_completion:
+ /* Normal notification (task_done) */
+ isci_set_task_doneflags(task);
+ break;
+ default:
+ WARN_ONCE(1, "unknown task_notification_selection: %d\n",
+ task_notification_selection);
+ break;
+ }
+
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ return task_notification_selection;
+
+}
+/**
+* isci_execpath_callback() - This function is called from the task
+* execute path when the task needs to callback libsas about the submit-time
+* task failure. The callback occurs either through the task's done function
+* or through sas_task_abort. In the case of regular non-discovery SATA/STP I/O
+* requests, libsas takes the host lock before calling execute task. Therefore
+* in this situation the host lock must be managed before calling the func.
+*
+* @ihost: This parameter is the controller to which the I/O request was sent.
+* @task: This parameter is the I/O request.
+* @func: This parameter is the function to call in the correct context.
+* @status: This parameter is the status code for the completed task.
+*
+*/
+static inline void isci_execpath_callback(struct isci_host *ihost,
+ struct sas_task *task,
+ void (*func)(struct sas_task *))
+{
+ struct domain_device *dev = task->dev;
+
+ if (dev_is_sata(dev) && task->uldd_task) {
+ unsigned long flags;
+
+ /* Since we are still in the submit path, and since
+ * libsas takes the host lock on behalf of SATA
+ * devices before I/O starts (in the non-discovery case),
+ * we need to unlock before we can call the callback function.
+ */
+ raw_local_irq_save(flags);
+ spin_unlock(dev->sata_dev.ap->lock);
+ func(task);
+ spin_lock(dev->sata_dev.ap->lock);
+ raw_local_irq_restore(flags);
+ } else
+ func(task);
+}
+#endif /* !defined(_SCI_TASK_H_) */
diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c
new file mode 100644
index 0000000..e9e1e2a
--- /dev/null
+++ b/drivers/scsi/isci/unsolicited_frame_control.c
@@ -0,0 +1,225 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "host.h"
+#include "unsolicited_frame_control.h"
+#include "registers.h"
+
+int sci_unsolicited_frame_control_construct(struct isci_host *ihost)
+{
+ struct sci_unsolicited_frame_control *uf_control = &ihost->uf_control;
+ struct sci_unsolicited_frame *uf;
+ u32 buf_len, header_len, i;
+ dma_addr_t dma;
+ size_t size;
+ void *virt;
+
+ /*
+ * Prepare all of the memory sizes for the UF headers, UF address
+ * table, and UF buffers themselves.
+ */
+ buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
+ header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header);
+ size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t);
+
+ /*
+ * The Unsolicited Frame buffers are set at the start of the UF
+ * memory descriptor entry. The headers and address table will be
+ * placed after the buffers.
+ */
+ virt = dmam_alloc_coherent(&ihost->pdev->dev, size, &dma, GFP_KERNEL);
+ if (!virt)
+ return -ENOMEM;
+
+ /*
+ * Program the location of the UF header table into the SCU.
+ * Notes:
+ * - The address must align on a 64-byte boundary. Guaranteed to be
+ * on 64-byte boundary already 1KB boundary for unsolicited frames.
+ * - Program unused header entries to overlap with the last
+ * unsolicited frame. The silicon will never DMA to these unused
+ * headers, since we program the UF address table pointers to
+ * NULL.
+ */
+ uf_control->headers.physical_address = dma + buf_len;
+ uf_control->headers.array = virt + buf_len;
+
+ /*
+ * Program the location of the UF address table into the SCU.
+ * Notes:
+ * - The address must align on a 64-bit boundary. Guaranteed to be on 64
+ * byte boundary already due to above programming headers being on a
+ * 64-bit boundary and headers are on a 64-bytes in size.
+ */
+ uf_control->address_table.physical_address = dma + buf_len + header_len;
+ uf_control->address_table.array = virt + buf_len + header_len;
+ uf_control->get = 0;
+
+ /*
+ * UF buffer requirements are:
+ * - The last entry in the UF queue is not NULL.
+ * - There is a power of 2 number of entries (NULL or not-NULL)
+ * programmed into the queue.
+ * - Aligned on a 1KB boundary. */
+
+ /*
+ * Program the actual used UF buffers into the UF address table and
+ * the controller's array of UFs.
+ */
+ for (i = 0; i < SCU_MAX_UNSOLICITED_FRAMES; i++) {
+ uf = &uf_control->buffers.array[i];
+
+ uf_control->address_table.array[i] = dma;
+
+ uf->buffer = virt;
+ uf->header = &uf_control->headers.array[i];
+ uf->state = UNSOLICITED_FRAME_EMPTY;
+
+ /*
+ * Increment the address of the physical and virtual memory
+ * pointers. Everything is aligned on 1k boundary with an
+ * increment of 1k.
+ */
+ virt += SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
+ dma += SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
+ }
+
+ return 0;
+}
+
+enum sci_status sci_unsolicited_frame_control_get_header(struct sci_unsolicited_frame_control *uf_control,
+ u32 frame_index,
+ void **frame_header)
+{
+ if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) {
+ /* Skip the first word in the frame since this is a controll word used
+ * by the hardware.
+ */
+ *frame_header = &uf_control->buffers.array[frame_index].header->data;
+
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+}
+
+enum sci_status sci_unsolicited_frame_control_get_buffer(struct sci_unsolicited_frame_control *uf_control,
+ u32 frame_index,
+ void **frame_buffer)
+{
+ if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) {
+ *frame_buffer = uf_control->buffers.array[frame_index].buffer;
+
+ return SCI_SUCCESS;
+ }
+
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+}
+
+bool sci_unsolicited_frame_control_release_frame(struct sci_unsolicited_frame_control *uf_control,
+ u32 frame_index)
+{
+ u32 frame_get;
+ u32 frame_cycle;
+
+ frame_get = uf_control->get & (SCU_MAX_UNSOLICITED_FRAMES - 1);
+ frame_cycle = uf_control->get & SCU_MAX_UNSOLICITED_FRAMES;
+
+ /*
+ * In the event there are NULL entries in the UF table, we need to
+ * advance the get pointer in order to find out if this frame should
+ * be released (i.e. update the get pointer)
+ */
+ while (lower_32_bits(uf_control->address_table.array[frame_get]) == 0 &&
+ upper_32_bits(uf_control->address_table.array[frame_get]) == 0 &&
+ frame_get < SCU_MAX_UNSOLICITED_FRAMES)
+ frame_get++;
+
+ /*
+ * The table has a NULL entry as it's last element. This is
+ * illegal.
+ */
+ BUG_ON(frame_get >= SCU_MAX_UNSOLICITED_FRAMES);
+ if (frame_index >= SCU_MAX_UNSOLICITED_FRAMES)
+ return false;
+
+ uf_control->buffers.array[frame_index].state = UNSOLICITED_FRAME_RELEASED;
+
+ if (frame_get != frame_index) {
+ /*
+ * Frames remain in use until we advance the get pointer
+ * so there is nothing we can do here
+ */
+ return false;
+ }
+
+ /*
+ * The frame index is equal to the current get pointer so we
+ * can now free up all of the frame entries that
+ */
+ while (uf_control->buffers.array[frame_get].state == UNSOLICITED_FRAME_RELEASED) {
+ uf_control->buffers.array[frame_get].state = UNSOLICITED_FRAME_EMPTY;
+
+ if (frame_get+1 == SCU_MAX_UNSOLICITED_FRAMES-1) {
+ frame_cycle ^= SCU_MAX_UNSOLICITED_FRAMES;
+ frame_get = 0;
+ } else
+ frame_get++;
+ }
+
+ uf_control->get = SCU_UFQGP_GEN_BIT(ENABLE_BIT) | frame_cycle | frame_get;
+
+ return true;
+}
diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h
new file mode 100644
index 0000000..31cb950
--- /dev/null
+++ b/drivers/scsi/isci/unsolicited_frame_control.h
@@ -0,0 +1,278 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_
+#define _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_
+
+#include "isci.h"
+
+#define SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS 15
+
+/**
+ * struct scu_unsolicited_frame_header -
+ *
+ * This structure delineates the format of an unsolicited frame header. The
+ * first DWORD are UF attributes defined by the silicon architecture. The data
+ * depicts actual header information received on the link.
+ */
+struct scu_unsolicited_frame_header {
+ /**
+ * This field indicates if there is an Initiator Index Table entry with
+ * which this header is associated.
+ */
+ u32 iit_exists:1;
+
+ /**
+ * This field simply indicates the protocol type (i.e. SSP, STP, SMP).
+ */
+ u32 protocol_type:3;
+
+ /**
+ * This field indicates if the frame is an address frame (IAF or OAF)
+ * or if it is a information unit frame.
+ */
+ u32 is_address_frame:1;
+
+ /**
+ * This field simply indicates the connection rate at which the frame
+ * was received.
+ */
+ u32 connection_rate:4;
+
+ u32 reserved:23;
+
+ /**
+ * This field represents the actual header data received on the link.
+ */
+ u32 data[SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS];
+
+};
+
+
+
+/**
+ * enum unsolicited_frame_state -
+ *
+ * This enumeration represents the current unsolicited frame state. The
+ * controller object can not updtate the hardware unsolicited frame put pointer
+ * unless it has already processed the priror unsolicited frames.
+ */
+enum unsolicited_frame_state {
+ /**
+ * This state is when the frame is empty and not in use. It is
+ * different from the released state in that the hardware could DMA
+ * data to this frame buffer.
+ */
+ UNSOLICITED_FRAME_EMPTY,
+
+ /**
+ * This state is set when the frame buffer is in use by by some
+ * object in the system.
+ */
+ UNSOLICITED_FRAME_IN_USE,
+
+ /**
+ * This state is set when the frame is returned to the free pool
+ * but one or more frames prior to this one are still in use.
+ * Once all of the frame before this one are freed it will go to
+ * the empty state.
+ */
+ UNSOLICITED_FRAME_RELEASED,
+
+ UNSOLICITED_FRAME_MAX_STATES
+};
+
+/**
+ * struct sci_unsolicited_frame -
+ *
+ * This is the unsolicited frame data structure it acts as the container for
+ * the current frame state, frame header and frame buffer.
+ */
+struct sci_unsolicited_frame {
+ /**
+ * This field contains the current frame state
+ */
+ enum unsolicited_frame_state state;
+
+ /**
+ * This field points to the frame header data.
+ */
+ struct scu_unsolicited_frame_header *header;
+
+ /**
+ * This field points to the frame buffer data.
+ */
+ void *buffer;
+
+};
+
+/**
+ * struct sci_uf_header_array -
+ *
+ * This structure contains all of the unsolicited frame header information.
+ */
+struct sci_uf_header_array {
+ /**
+ * This field is represents a virtual pointer to the start
+ * address of the UF address table. The table contains
+ * 64-bit pointers as required by the hardware.
+ */
+ struct scu_unsolicited_frame_header *array;
+
+ /**
+ * This field specifies the physical address location for the UF
+ * buffer array.
+ */
+ dma_addr_t physical_address;
+
+};
+
+/**
+ * struct sci_uf_buffer_array -
+ *
+ * This structure contains all of the unsolicited frame buffer (actual payload)
+ * information.
+ */
+struct sci_uf_buffer_array {
+ /**
+ * This field is the unsolicited frame data its used to manage
+ * the data for the unsolicited frame requests. It also represents
+ * the virtual address location that corresponds to the
+ * physical_address field.
+ */
+ struct sci_unsolicited_frame array[SCU_MAX_UNSOLICITED_FRAMES];
+
+ /**
+ * This field specifies the physical address location for the UF
+ * buffer array.
+ */
+ dma_addr_t physical_address;
+};
+
+/**
+ * struct sci_uf_address_table_array -
+ *
+ * This object maintains all of the unsolicited frame address table specific
+ * data. The address table is a collection of 64-bit pointers that point to
+ * 1KB buffers into which the silicon will DMA unsolicited frames.
+ */
+struct sci_uf_address_table_array {
+ /**
+ * This field represents a virtual pointer that refers to the
+ * starting address of the UF address table.
+ * 64-bit pointers are required by the hardware.
+ */
+ dma_addr_t *array;
+
+ /**
+ * This field specifies the physical address location for the UF
+ * address table.
+ */
+ dma_addr_t physical_address;
+
+};
+
+/**
+ * struct sci_unsolicited_frame_control -
+ *
+ * This object contains all of the data necessary to handle unsolicited frames.
+ */
+struct sci_unsolicited_frame_control {
+ /**
+ * This field is the software copy of the unsolicited frame queue
+ * get pointer. The controller object writes this value to the
+ * hardware to let the hardware put more unsolicited frame entries.
+ */
+ u32 get;
+
+ /**
+ * This field contains all of the unsolicited frame header
+ * specific fields.
+ */
+ struct sci_uf_header_array headers;
+
+ /**
+ * This field contains all of the unsolicited frame buffer
+ * specific fields.
+ */
+ struct sci_uf_buffer_array buffers;
+
+ /**
+ * This field contains all of the unsolicited frame address table
+ * specific fields.
+ */
+ struct sci_uf_address_table_array address_table;
+
+};
+
+struct isci_host;
+
+int sci_unsolicited_frame_control_construct(struct isci_host *ihost);
+
+enum sci_status sci_unsolicited_frame_control_get_header(
+ struct sci_unsolicited_frame_control *uf_control,
+ u32 frame_index,
+ void **frame_header);
+
+enum sci_status sci_unsolicited_frame_control_get_buffer(
+ struct sci_unsolicited_frame_control *uf_control,
+ u32 frame_index,
+ void **frame_buffer);
+
+bool sci_unsolicited_frame_control_release_frame(
+ struct sci_unsolicited_frame_control *uf_control,
+ u32 frame_index);
+
+#endif /* _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ */
diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index 4f64183..7e9c399 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -635,7 +635,7 @@
struct clk *clkp;
list_for_each_entry(clkp, &clock_list, node) {
- if (likely(clkp->ops)) {
+ if (likely(clkp->usecount && clkp->ops)) {
unsigned long rate = clkp->rate;
if (likely(clkp->ops->set_parent))
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 6a9e58d..d18ce9e 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -1861,6 +1861,7 @@
}
if ((clk_freq.cpsdvsr < CPSDVR_MIN)
|| (clk_freq.cpsdvsr > CPSDVR_MAX)) {
+ status = -EINVAL;
dev_err(&spi->dev,
"cpsdvsr is configured incorrectly\n");
goto err_config_params;
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index 6f86ba0..969cdd2 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -298,7 +298,7 @@
unsigned int count, c;
unsigned long base, tx_reg, rx_reg;
int word_len, data_type, element_count;
- int elements;
+ int elements = 0;
u32 l;
u8 * rx;
const u8 * tx;
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index f706dba..cc880c9 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -681,13 +681,14 @@
drv_data->cs_change = transfer->cs_change;
/* Bits per word setup */
- bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word;
- if ((bits_per_word > 0) && (bits_per_word % 16 == 0)) {
+ bits_per_word = transfer->bits_per_word ? :
+ message->spi->bits_per_word ? : 8;
+ if (bits_per_word % 16 == 0) {
drv_data->n_bytes = bits_per_word/8;
drv_data->len = (transfer->len) >> 1;
cr_width = BIT_CTL_WORDSIZE;
drv_data->ops = &bfin_bfin_spi_transfer_ops_u16;
- } else if ((bits_per_word > 0) && (bits_per_word % 8 == 0)) {
+ } else if (bits_per_word % 8 == 0) {
drv_data->n_bytes = bits_per_word/8;
drv_data->len = transfer->len;
cr_width = 0;
diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index 795828b..8945e20 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -116,9 +116,7 @@
(((i)->fifo_lvl_mask + 1))) \
? 1 : 0)
-#define S3C64XX_SPI_ST_TX_DONE(v, i) ((((v) >> (i)->rx_lvl_offset) & \
- (((i)->fifo_lvl_mask + 1) << 1)) \
- ? 1 : 0)
+#define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & (1 << (i)->tx_st_done)) ? 1 : 0)
#define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask)
#define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask)
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 82feb34..d6620ad 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -516,8 +516,17 @@
static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
{
+ ssb_pcicore_fix_sprom_core_index(pc);
+
/* Disable PCI interrupts. */
ssb_write32(pc->dev, SSB_INTVEC, 0);
+
+ /* Additional PCIe always once-executed workarounds */
+ if (pc->dev->id.coreid == SSB_DEV_PCIE) {
+ ssb_pcicore_serdes_workaround(pc);
+ /* TODO: ASPM */
+ /* TODO: Clock Request Update */
+ }
}
void ssb_pcicore_init(struct ssb_pcicore *pc)
@@ -529,8 +538,6 @@
if (!ssb_device_is_enabled(dev))
ssb_device_enable(dev, 0);
- ssb_pcicore_fix_sprom_core_index(pc);
-
#ifdef CONFIG_SSB_PCICORE_HOSTMODE
pc->hostmode = pcicore_is_in_hostmode(pc);
if (pc->hostmode)
@@ -538,11 +545,6 @@
#endif /* CONFIG_SSB_PCICORE_HOSTMODE */
if (!pc->hostmode)
ssb_pcicore_init_clientmode(pc);
-
- /* Additional always once-executed workarounds */
- ssb_pcicore_serdes_workaround(pc);
- /* TODO: ASPM */
- /* TODO: Clock Request Update */
}
static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index dfc16f9..196284d 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -24,23 +24,6 @@
if STAGING
-config STAGING_EXCLUDE_BUILD
- bool "Exclude Staging drivers from being built" if STAGING
- default y
- ---help---
- Are you sure you really want to build the staging drivers?
- They taint your kernel, don't live up to the normal Linux
- kernel quality standards, are a bit crufty around the edges,
- and might go off and kick your dog when you aren't paying
- attention.
-
- Say N here to be able to select and build the Staging drivers.
- This option is primarily here to prevent them from being built
- when selecting 'make allyesconfg' and 'make allmodconfig' so
- don't be all that put off, your dog will be just fine.
-
-if !STAGING_EXCLUDE_BUILD
-
source "drivers/staging/tty/Kconfig"
source "drivers/staging/generic_serial/Kconfig"
@@ -177,5 +160,4 @@
source "drivers/staging/nvec/Kconfig"
-endif # !STAGING_EXCLUDE_BUILD
endif # STAGING
diff --git a/drivers/staging/altera-stapl/altera-jtag.c b/drivers/staging/altera-stapl/altera-jtag.c
index 8763088..8b1620b 100644
--- a/drivers/staging/altera-stapl/altera-jtag.c
+++ b/drivers/staging/altera-stapl/altera-jtag.c
@@ -26,7 +26,7 @@
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/slab.h>
-#include <staging/altera.h>
+#include "altera.h"
#include "altera-exprt.h"
#include "altera-jtag.h"
diff --git a/drivers/staging/altera-stapl/altera.c b/drivers/staging/altera-stapl/altera.c
index 05aad35..9cd5e76 100644
--- a/drivers/staging/altera-stapl/altera.c
+++ b/drivers/staging/altera-stapl/altera.c
@@ -28,7 +28,7 @@
#include <linux/string.h>
#include <linux/firmware.h>
#include <linux/slab.h>
-#include <staging/altera.h>
+#include "altera.h"
#include "altera-exprt.h"
#include "altera-jtag.h"
diff --git a/include/staging/altera.h b/drivers/staging/altera-stapl/altera.h
similarity index 100%
rename from include/staging/altera.h
rename to drivers/staging/altera-stapl/altera.h
diff --git a/drivers/staging/ath6kl/Kconfig b/drivers/staging/ath6kl/Kconfig
index 1f15e1f..afd6cc1 100644
--- a/drivers/staging/ath6kl/Kconfig
+++ b/drivers/staging/ath6kl/Kconfig
@@ -1,6 +1,7 @@
config ATH6K_LEGACY
tristate "Atheros AR6003 support (non mac80211)"
depends on MMC && WLAN
+ depends on CFG80211
select WIRELESS_EXT
select WEXT_PRIV
help
diff --git a/drivers/staging/ath6kl/os/linux/cfg80211.c b/drivers/staging/ath6kl/os/linux/cfg80211.c
index 77dfb40..d3a774d 100644
--- a/drivers/staging/ath6kl/os/linux/cfg80211.c
+++ b/drivers/staging/ath6kl/os/linux/cfg80211.c
@@ -870,7 +870,8 @@
if(ar->scan_request)
{
/* Translate data to cfg80211 mgmt format */
- wmi_iterate_nodes(ar->arWmi, ar6k_cfg80211_scan_node, ar->wdev->wiphy);
+ if (ar->arWmi)
+ wmi_iterate_nodes(ar->arWmi, ar6k_cfg80211_scan_node, ar->wdev->wiphy);
cfg80211_scan_done(ar->scan_request,
((status & A_ECANCELED) || (status & A_EBUSY)) ? true : false);
diff --git a/drivers/staging/brcm80211/Kconfig b/drivers/staging/brcm80211/Kconfig
index f4cf9b2..379cf16 100644
--- a/drivers/staging/brcm80211/Kconfig
+++ b/drivers/staging/brcm80211/Kconfig
@@ -7,6 +7,7 @@
default n
depends on PCI
depends on WLAN && MAC80211
+ depends on X86 || MIPS
select BRCMUTIL
select FW_LOADER
select CRC_CCITT
@@ -20,6 +21,7 @@
default n
depends on MMC
depends on WLAN && CFG80211
+ depends on X86 || MIPS
select BRCMUTIL
select FW_LOADER
select WIRELESS_EXT
diff --git a/drivers/staging/brcm80211/brcmfmac/wl_iw.c b/drivers/staging/brcm80211/brcmfmac/wl_iw.c
index 929ceaf..15e1b05 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_iw.c
+++ b/drivers/staging/brcm80211/brcmfmac/wl_iw.c
@@ -64,8 +64,6 @@
extern bool wl_iw_conn_status_str(u32 event_type, u32 status,
u32 reason, char *stringBuf, uint buflen);
-uint wl_msg_level = WL_ERROR_VAL;
-
#define MAX_WLIW_IOCTL_LEN 1024
#ifdef CONFIG_WIRELESS_EXT
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 1502d80..20008a4 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -2,6 +2,7 @@
tristate "Data acquisition support (comedi)"
default N
depends on m
+ depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
---help---
Enable support a wide range of data acquisition devices
for Linux.
@@ -160,6 +161,7 @@
config COMEDI_PCL812
tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
@@ -171,6 +173,7 @@
config COMEDI_PCL816
tristate "Advantech PCL-814 and PCL-816 ISA card support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-814 and PCL-816 ISA cards
@@ -180,6 +183,7 @@
config COMEDI_PCL818
tristate "Advantech PCL-718 and PCL-818 ISA card support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for Advantech PCL-818 ISA cards
@@ -269,6 +273,7 @@
config COMEDI_DAS1800
tristate "DAS1800 and compatible ISA card support"
+ depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
@@ -340,6 +345,7 @@
config COMEDI_DT282X
tristate "Data Translation DT2821 series and DT-EZ ISA card support"
select COMEDI_FC
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for Data Translation DT2821 series including DT-EZ
@@ -419,6 +425,7 @@
config COMEDI_NI_AT_A2150
tristate "NI AT-A2150 ISA card support"
depends on COMEDI_NI_COMMON
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for National Instruments AT-A2150 cards
@@ -536,6 +543,7 @@
config COMEDI_ADDI_APCI_035
tristate "ADDI-DATA APCI_035 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_035 cards
@@ -545,6 +553,7 @@
config COMEDI_ADDI_APCI_1032
tristate "ADDI-DATA APCI_1032 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1032 cards
@@ -554,6 +563,7 @@
config COMEDI_ADDI_APCI_1500
tristate "ADDI-DATA APCI_1500 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1500 cards
@@ -563,6 +573,7 @@
config COMEDI_ADDI_APCI_1516
tristate "ADDI-DATA APCI_1516 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1516 cards
@@ -572,6 +583,7 @@
config COMEDI_ADDI_APCI_1564
tristate "ADDI-DATA APCI_1564 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_1564 cards
@@ -581,6 +593,7 @@
config COMEDI_ADDI_APCI_16XX
tristate "ADDI-DATA APCI_16xx support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_16xx cards
@@ -590,6 +603,7 @@
config COMEDI_ADDI_APCI_2016
tristate "ADDI-DATA APCI_2016 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2016 cards
@@ -599,6 +613,7 @@
config COMEDI_ADDI_APCI_2032
tristate "ADDI-DATA APCI_2032 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2032 cards
@@ -608,6 +623,7 @@
config COMEDI_ADDI_APCI_2200
tristate "ADDI-DATA APCI_2200 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_2200 cards
@@ -617,6 +633,7 @@
config COMEDI_ADDI_APCI_3001
tristate "ADDI-DATA APCI_3001 support"
+ depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
@@ -627,6 +644,7 @@
config COMEDI_ADDI_APCI_3120
tristate "ADDI-DATA APCI_3520 support"
+ depends on VIRT_TO_BUS
select COMEDI_FC
default N
---help---
@@ -637,6 +655,7 @@
config COMEDI_ADDI_APCI_3501
tristate "ADDI-DATA APCI_3501 support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_3501 cards
@@ -646,6 +665,7 @@
config COMEDI_ADDI_APCI_3XXX
tristate "ADDI-DATA APCI_3xxx support"
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADDI-DATA APCI_3xxx cards
@@ -712,6 +732,7 @@
config COMEDI_ADL_PCI9118
tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
select COMEDI_FC
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
@@ -1287,6 +1308,7 @@
depends on COMEDI_MITE
select COMEDI_8255
select COMEDI_FC
+ depends on VIRT_TO_BUS
default N
---help---
Enable support for National Instruments Lab-PC and compatibles
diff --git a/drivers/staging/gma500/psb_drv.c b/drivers/staging/gma500/psb_drv.c
index 1c45c11..aa87b1b 100644
--- a/drivers/staging/gma500/psb_drv.c
+++ b/drivers/staging/gma500/psb_drv.c
@@ -542,6 +542,8 @@
unsigned long irqflags;
int ret = -ENOMEM;
uint32_t tt_pages;
+ struct drm_connector *connector;
+ struct psb_intel_output *psb_intel_output;
dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
if (dev_priv == NULL)
@@ -663,7 +665,18 @@
drm_kms_helper_poll_init(dev);
}
- ret = psb_backlight_init(dev);
+ /* Only add backlight support if we have LVDS output */
+ list_for_each_entry(connector, &dev->mode_config.connector_list,
+ head) {
+ psb_intel_output = to_psb_intel_output(connector);
+
+ switch (psb_intel_output->type) {
+ case INTEL_OUTPUT_LVDS:
+ ret = psb_backlight_init(dev);
+ break;
+ }
+ }
+
if (ret)
return ret;
#if 0
diff --git a/drivers/staging/gma500/psb_fb.c b/drivers/staging/gma500/psb_fb.c
index 99c03a2..084c36b 100644
--- a/drivers/staging/gma500/psb_fb.c
+++ b/drivers/staging/gma500/psb_fb.c
@@ -441,6 +441,16 @@
info->screen_size = size;
memset(info->screen_base, 0, size);
+ if (dev_priv->pg->stolen_size) {
+ info->apertures = alloc_apertures(1);
+ if (!info->apertures) {
+ ret = -ENOMEM;
+ goto out_err0;
+ }
+ info->apertures->ranges[0].base = dev->mode_config.fb_base;
+ info->apertures->ranges[0].size = dev_priv->pg->stolen_size;
+ }
+
drm_fb_helper_fill_fix(info, fb->pitch, fb->depth);
drm_fb_helper_fill_var(info, &fbdev->psb_fb_helper,
sizes->fb_width, sizes->fb_height);
diff --git a/drivers/staging/gma500/psb_intel_bios.c b/drivers/staging/gma500/psb_intel_bios.c
index 48ac8ba..417965d 100644
--- a/drivers/staging/gma500/psb_intel_bios.c
+++ b/drivers/staging/gma500/psb_intel_bios.c
@@ -154,10 +154,15 @@
fill_detail_timing_data(panel_fixed_mode, dvo_timing);
- dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode;
-
- DRM_DEBUG("Found panel mode in BIOS VBT tables:\n");
- drm_mode_debug_printmodeline(panel_fixed_mode);
+ if (panel_fixed_mode->htotal > 0 && panel_fixed_mode->vtotal > 0) {
+ dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode;
+ DRM_DEBUG("Found panel mode in BIOS VBT tables:\n");
+ drm_mode_debug_printmodeline(panel_fixed_mode);
+ } else {
+ DRM_DEBUG("Ignoring bogus LVDS VBT mode.\n");
+ dev_priv->lvds_vbt = 0;
+ kfree(panel_fixed_mode);
+ }
return;
}
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index f96d5b5..d329635 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -4,7 +4,7 @@
menuconfig IIO
tristate "Industrial I/O support"
- depends on !S390
+ depends on GENERIC_HARDIRQS
help
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h
index 0b9b854..4cc1a5b 100644
--- a/drivers/staging/iio/accel/adis16201.h
+++ b/drivers/staging/iio/accel/adis16201.h
@@ -81,7 +81,6 @@
int adis16201_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
enum adis16201_scan {
ADIS16201_SCAN_SUPPLY,
ADIS16201_SCAN_ACC_X,
@@ -92,6 +91,7 @@
ADIS16201_SCAN_INCLI_Y,
};
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16201_remove_trigger(struct iio_dev *indio_dev);
int adis16201_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h
index 8bb8ce5..175e21b 100644
--- a/drivers/staging/iio/accel/adis16203.h
+++ b/drivers/staging/iio/accel/adis16203.h
@@ -76,7 +76,6 @@
int adis16203_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
enum adis16203_scan {
ADIS16203_SCAN_SUPPLY,
ADIS16203_SCAN_AUX_ADC,
@@ -85,6 +84,7 @@
ADIS16203_SCAN_INCLI_Y,
};
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16203_remove_trigger(struct iio_dev *indio_dev);
int adis16203_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h
index 5310a42..1690c0d 100644
--- a/drivers/staging/iio/accel/adis16204.h
+++ b/drivers/staging/iio/accel/adis16204.h
@@ -84,7 +84,6 @@
int adis16204_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
enum adis16204_scan {
ADIS16204_SCAN_SUPPLY,
ADIS16204_SCAN_ACC_X,
@@ -93,6 +92,7 @@
ADIS16204_SCAN_TEMP,
};
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16204_remove_trigger(struct iio_dev *indio_dev);
int adis16204_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h
index 58d08db..3153cbe 100644
--- a/drivers/staging/iio/accel/adis16209.h
+++ b/drivers/staging/iio/accel/adis16209.h
@@ -121,8 +121,6 @@
int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
-
#define ADIS16209_SCAN_SUPPLY 0
#define ADIS16209_SCAN_ACC_X 1
#define ADIS16209_SCAN_ACC_Y 2
@@ -132,6 +130,8 @@
#define ADIS16209_SCAN_INCLI_Y 6
#define ADIS16209_SCAN_ROT 7
+#ifdef CONFIG_IIO_RING_BUFFER
+
void adis16209_remove_trigger(struct iio_dev *indio_dev);
int adis16209_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/dac/max517.c b/drivers/staging/iio/dac/max517.c
index 881768d..2fe34d2 100644
--- a/drivers/staging/iio/dac/max517.c
+++ b/drivers/staging/iio/dac/max517.c
@@ -195,7 +195,7 @@
};
static const struct iio_info max518_info = {
- .attrs = &max517_attribute_group,
+ .attrs = &max518_attribute_group,
.driver_module = THIS_MODULE,
};
diff --git a/drivers/staging/iio/gyro/adis16260.h b/drivers/staging/iio/gyro/adis16260.h
index 702dc98..24bf70e 100644
--- a/drivers/staging/iio/gyro/adis16260.h
+++ b/drivers/staging/iio/gyro/adis16260.h
@@ -104,7 +104,6 @@
int adis16260_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
/* At the moment triggers are only used for ring buffer
* filling. This may change!
*/
@@ -115,6 +114,7 @@
#define ADIS16260_SCAN_TEMP 3
#define ADIS16260_SCAN_ANGL 4
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16260_remove_trigger(struct iio_dev *indio_dev);
int adis16260_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h
index db184d1..e87715b9 100644
--- a/drivers/staging/iio/imu/adis16400.h
+++ b/drivers/staging/iio/imu/adis16400.h
@@ -158,7 +158,6 @@
int adis16400_set_irq(struct iio_dev *indio_dev, bool enable);
-#ifdef CONFIG_IIO_RING_BUFFER
/* At the moment triggers are only used for ring buffer
* filling. This may change!
*/
@@ -182,6 +181,7 @@
#define ADIS16300_SCAN_INCLI_X 12
#define ADIS16300_SCAN_INCLI_Y 13
+#ifdef CONFIG_IIO_RING_BUFFER
void adis16400_remove_trigger(struct iio_dev *indio_dev);
int adis16400_probe_trigger(struct iio_dev *indio_dev);
diff --git a/drivers/staging/iio/imu/adis16400_ring.c b/drivers/staging/iio/imu/adis16400_ring.c
index 2589a7e..3612373 100644
--- a/drivers/staging/iio/imu/adis16400_ring.c
+++ b/drivers/staging/iio/imu/adis16400_ring.c
@@ -137,13 +137,13 @@
if (st->variant->flags & ADIS16400_NO_BURST) {
ret = adis16350_spi_read_all(&indio_dev->dev, st->rx);
if (ret < 0)
- return ret;
+ goto err;
for (; i < ring->scan_count; i++)
data[i] = *(s16 *)(st->rx + i*2);
} else {
ret = adis16400_spi_read_burst(&indio_dev->dev, st->rx);
if (ret < 0)
- return ret;
+ goto err;
for (; i < indio_dev->ring->scan_count; i++) {
j = __ffs(mask);
mask &= ~(1 << j);
@@ -158,9 +158,13 @@
ring->access->store_to(indio_dev->ring, (u8 *) data, pf->timestamp);
iio_trigger_notify_done(indio_dev->trig);
- kfree(data);
+ kfree(data);
return IRQ_HANDLED;
+
+err:
+ kfree(data);
+ return ret;
}
void adis16400_unconfigure_ring(struct iio_dev *indio_dev)
diff --git a/drivers/staging/iio/industrialio-trigger.c b/drivers/staging/iio/industrialio-trigger.c
index 6159023..d504aa2 100644
--- a/drivers/staging/iio/industrialio-trigger.c
+++ b/drivers/staging/iio/industrialio-trigger.c
@@ -294,6 +294,7 @@
pf->h = h;
pf->thread = thread;
pf->type = type;
+ pf->private_data = private;
return pf;
}
diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c
index 4039eda..4a9e563 100644
--- a/drivers/staging/lirc/lirc_imon.c
+++ b/drivers/staging/lirc/lirc_imon.c
@@ -672,8 +672,6 @@
static void usb_rx_callback(struct urb *urb)
{
struct imon_context *context;
- unsigned char *buf;
- int len;
int intfnum = 0;
if (!urb)
@@ -683,9 +681,6 @@
if (!context)
return;
- buf = urb->transfer_buffer;
- len = urb->actual_length;
-
switch (urb->status) {
case -ENOENT: /* usbcore unlink successful! */
return;
@@ -728,7 +723,6 @@
int ir_ep_found = 0;
int alloc_status = 0;
int vfd_proto_6p = 0;
- int code_length;
struct imon_context *context = NULL;
int i;
u16 vendor, product;
@@ -749,8 +743,6 @@
else
context->display = 1;
- code_length = BUF_CHUNK_SIZE * 8;
-
usbdev = usb_get_dev(interface_to_usbdev(interface));
iface_desc = interface->cur_altsetting;
num_endpts = iface_desc->desc.bNumEndpoints;
@@ -856,7 +848,7 @@
strcpy(driver->name, MOD_NAME);
driver->minor = -1;
- driver->code_length = sizeof(int) * 8;
+ driver->code_length = BUF_CHUNK_SIZE * 8;
driver->sample_rate = 0;
driver->features = LIRC_CAN_REC_MODE2;
driver->data = context;
diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c
index 4a3cca0..805df91 100644
--- a/drivers/staging/lirc/lirc_serial.c
+++ b/drivers/staging/lirc/lirc_serial.c
@@ -838,7 +838,23 @@
static int init_port(void)
{
- int i, nlow, nhigh;
+ int i, nlow, nhigh, result;
+
+ result = request_irq(irq, irq_handler,
+ IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0),
+ LIRC_DRIVER_NAME, (void *)&hardware);
+
+ switch (result) {
+ case -EBUSY:
+ printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq);
+ return -EBUSY;
+ case -EINVAL:
+ printk(KERN_ERR LIRC_DRIVER_NAME
+ ": Bad irq number or handler\n");
+ return -EINVAL;
+ default:
+ break;
+ };
/* Reserve io region. */
/*
@@ -893,34 +909,17 @@
printk(KERN_INFO LIRC_DRIVER_NAME ": Manually using active "
"%s receiver\n", sense ? "low" : "high");
+ dprintk("Interrupt %d, port %04x obtained\n", irq, io);
return 0;
}
static int set_use_inc(void *data)
{
- int result;
unsigned long flags;
/* initialize timestamp */
do_gettimeofday(&lasttv);
- result = request_irq(irq, irq_handler,
- IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0),
- LIRC_DRIVER_NAME, (void *)&hardware);
-
- switch (result) {
- case -EBUSY:
- printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq);
- return -EBUSY;
- case -EINVAL:
- printk(KERN_ERR LIRC_DRIVER_NAME
- ": Bad irq number or handler\n");
- return -EINVAL;
- default:
- dprintk("Interrupt %d, port %04x obtained\n", irq, io);
- break;
- }
-
spin_lock_irqsave(&hardware[type].lock, flags);
/* Set DLAB 0. */
@@ -945,10 +944,6 @@
soutp(UART_IER, sinp(UART_IER) &
(~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI)));
spin_unlock_irqrestore(&hardware[type].lock, flags);
-
- free_irq(irq, (void *)&hardware);
-
- dprintk("freed IRQ %d\n", irq);
}
static ssize_t lirc_write(struct file *file, const char *buf,
@@ -1256,6 +1251,9 @@
static void __exit lirc_serial_exit_module(void)
{
lirc_serial_exit();
+
+ free_irq(irq, (void *)&hardware);
+
if (iommap != 0)
release_mem_region(iommap, 8 << ioshift);
else
diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c
index a7b46f2..0d38645 100644
--- a/drivers/staging/lirc/lirc_sir.c
+++ b/drivers/staging/lirc/lirc_sir.c
@@ -739,23 +739,16 @@
static void send_pulse(unsigned long len)
{
long bytes_out = len / TIME_CONST;
- long time_left;
- time_left = (long)len - (long)bytes_out * (long)TIME_CONST;
- if (bytes_out == 0) {
+ if (bytes_out == 0)
bytes_out++;
- time_left = 0;
- }
+
while (bytes_out--) {
outb(PULSE, io + UART_TX);
/* FIXME treba seriozne cakanie z char/serial.c */
while (!(inb(io + UART_LSR) & UART_LSR_THRE))
;
}
-#if 0
- if (time_left > 0)
- safe_udelay(time_left);
-#endif
}
#endif
diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c
index dd6a57c..4e051f6 100644
--- a/drivers/staging/lirc/lirc_zilog.c
+++ b/drivers/staging/lirc/lirc_zilog.c
@@ -475,14 +475,14 @@
dprintk("poll thread started\n");
while (!kthread_should_stop()) {
+ set_current_state(TASK_INTERRUPTIBLE);
+
/* if device not opened, we can sleep half a second */
if (atomic_read(&ir->open_count) == 0) {
schedule_timeout(HZ/2);
continue;
}
- set_current_state(TASK_INTERRUPTIBLE);
-
/*
* This is ~113*2 + 24 + jitter (2*repeat gap + code length).
* We use this interval as the chip resets every time you poll
diff --git a/drivers/staging/mei/init.c b/drivers/staging/mei/init.c
index 2818851..685fcf6 100644
--- a/drivers/staging/mei/init.c
+++ b/drivers/staging/mei/init.c
@@ -189,7 +189,7 @@
mutex_lock(&dev->device_lock);
}
- if (!err && !dev->recvd_msg) {
+ if (err <= 0 && !dev->recvd_msg) {
dev->mei_state = MEI_DISABLED;
dev_dbg(&dev->pdev->dev,
"wait_event_interruptible_timeout failed"
@@ -205,10 +205,10 @@
"host_hw_state = 0x%08x, me_hw_state = 0x%08x.\n",
dev->host_hw_state, dev->me_hw_state);
- if (!(dev->host_hw_state & H_RDY) != H_RDY)
+ if (!(dev->host_hw_state & H_RDY))
dev_dbg(&dev->pdev->dev, "host turn off H_RDY.\n");
- if (!(dev->me_hw_state & ME_RDY_HRA) != ME_RDY_HRA)
+ if (!(dev->me_hw_state & ME_RDY_HRA))
dev_dbg(&dev->pdev->dev, "ME turn off ME_RDY.\n");
printk(KERN_ERR "mei: link layer initialization failed.\n");
diff --git a/drivers/staging/mei/wd.c b/drivers/staging/mei/wd.c
index 2564b03..fff53d0 100644
--- a/drivers/staging/mei/wd.c
+++ b/drivers/staging/mei/wd.c
@@ -169,10 +169,15 @@
ret = wait_event_interruptible_timeout(dev->wait_stop_wd,
dev->wd_stopped, 10 * HZ);
mutex_lock(&dev->device_lock);
- if (!dev->wd_stopped)
- dev_dbg(&dev->pdev->dev, "stop wd failed to complete.\n");
- else
- dev_dbg(&dev->pdev->dev, "stop wd complete.\n");
+ if (dev->wd_stopped) {
+ dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret);
+ ret = 0;
+ } else {
+ if (!ret)
+ ret = -ETIMEDOUT;
+ dev_warn(&dev->pdev->dev,
+ "stop wd failed to complete ret=%d.\n", ret);
+ }
if (preserve)
dev->wd_timeout = wd_timeout;
diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig
index b053067..fe40e0b 100644
--- a/drivers/staging/olpc_dcon/Kconfig
+++ b/drivers/staging/olpc_dcon/Kconfig
@@ -2,6 +2,7 @@
tristate "One Laptop Per Child Display CONtroller support"
depends on OLPC && FB
select I2C
+ select BACKLIGHT_CLASS_DEVICE
---help---
Add support for the OLPC XO DCON controller. This controller is
only available on OLPC platforms. Unless you have one of these
diff --git a/drivers/staging/rts_pstor/sd.c b/drivers/staging/rts_pstor/sd.c
index bddb031..cdae497 100644
--- a/drivers/staging/rts_pstor/sd.c
+++ b/drivers/staging/rts_pstor/sd.c
@@ -2328,7 +2328,7 @@
retval = sd_send_cmd_get_rsp(chip, IO_SEND_OP_COND, 0, SD_RSP_TYPE_R4, rsp, 5);
if (retval == STATUS_SUCCESS) {
- int func_num = (rsp[1] >> 4) && 0x07;
+ int func_num = (rsp[1] >> 4) & 0x07;
if (func_num) {
RTSX_DEBUGP("SD_IO card (Function number: %d)!\n", func_num);
chip->sd_io = 1;
diff --git a/drivers/staging/usbip/stub_dev.c b/drivers/staging/usbip/stub_dev.c
index 6e99ec8..8cbea42 100644
--- a/drivers/staging/usbip/stub_dev.c
+++ b/drivers/staging/usbip/stub_dev.c
@@ -26,6 +26,8 @@
static int stub_probe(struct usb_interface *interface,
const struct usb_device_id *id);
static void stub_disconnect(struct usb_interface *interface);
+static int stub_pre_reset(struct usb_interface *interface);
+static int stub_post_reset(struct usb_interface *interface);
/*
* Define device IDs here if you want to explicitly limit exportable devices.
@@ -59,6 +61,8 @@
.probe = stub_probe,
.disconnect = stub_disconnect,
.id_table = stub_table,
+ .pre_reset = stub_pre_reset,
+ .post_reset = stub_post_reset,
};
/*
@@ -541,3 +545,20 @@
del_match_busid((char *)udev_busid);
}
}
+
+/*
+ * Presence of pre_reset and post_reset prevents the driver from being unbound
+ * when the device is being reset
+ */
+
+int stub_pre_reset(struct usb_interface *interface)
+{
+ dev_dbg(&interface->dev, "pre_reset\n");
+ return 0;
+}
+
+int stub_post_reset(struct usb_interface *interface)
+{
+ dev_dbg(&interface->dev, "post_reset\n");
+ return 0;
+}
diff --git a/drivers/staging/usbip/stub_rx.c b/drivers/staging/usbip/stub_rx.c
index a5c1fa1..bc57844 100644
--- a/drivers/staging/usbip/stub_rx.c
+++ b/drivers/staging/usbip/stub_rx.c
@@ -175,16 +175,18 @@
dev_info(&urb->dev->dev, "usb_queue_reset_device\n");
/*
- * usb_lock_device_for_reset caused a deadlock: it causes the driver
- * to unbind. In the shutdown the rx thread is signalled to shut down
- * but this thread is pending in the usb_lock_device_for_reset.
- *
- * Instead queue the reset.
- *
- * Unfortunatly an existing usbip connection will be dropped due to
- * driver unbinding.
+ * With the implementation of pre_reset and post_reset the driver no
+ * longer unbinds. This allows the use of synchronous reset.
*/
- usb_queue_reset_device(sdev->interface);
+
+ if (usb_lock_device_for_reset(sdev->udev, sdev->interface)<0)
+ {
+ dev_err(&urb->dev->dev, "could not obtain lock to reset device\n");
+ return 0;
+ }
+ usb_reset_device(sdev->udev);
+ usb_unlock_device(sdev->udev);
+
return 0;
}
diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index dee2a2c..70c2e7f 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -386,7 +386,7 @@
*/
se_cmd->se_tmr_req = core_tmr_alloc_req(se_cmd, (void *)tl_tmr,
TMR_LUN_RESET);
- if (!se_cmd->se_tmr_req)
+ if (IS_ERR(se_cmd->se_tmr_req))
goto release;
/*
* Locate the underlying TCM struct se_lun from sc->device->lun
@@ -1017,6 +1017,7 @@
struct se_portal_group *se_tpg;
struct tcm_loop_hba *tl_hba = tl_tpg->tl_hba;
struct tcm_loop_nexus *tl_nexus;
+ int ret = -ENOMEM;
if (tl_tpg->tl_hba->tl_nexus) {
printk(KERN_INFO "tl_tpg->tl_hba->tl_nexus already exists\n");
@@ -1033,8 +1034,10 @@
* Initialize the struct se_session pointer
*/
tl_nexus->se_sess = transport_init_session();
- if (!tl_nexus->se_sess)
+ if (IS_ERR(tl_nexus->se_sess)) {
+ ret = PTR_ERR(tl_nexus->se_sess);
goto out;
+ }
/*
* Since we are running in 'demo mode' this call with generate a
* struct se_node_acl for the tcm_loop struct se_portal_group with the SCSI
@@ -1060,7 +1063,7 @@
out:
kfree(tl_nexus);
- return -ENOMEM;
+ return ret;
}
static int tcm_loop_drop_nexus(
@@ -1140,7 +1143,7 @@
* the fabric protocol_id set in tcm_loop_make_scsi_hba(), and call
* tcm_loop_make_nexus()
*/
- if (strlen(page) > TL_WWN_ADDR_LEN) {
+ if (strlen(page) >= TL_WWN_ADDR_LEN) {
printk(KERN_ERR "Emulated NAA Sas Address: %s, exceeds"
" max: %d\n", page, TL_WWN_ADDR_LEN);
return -EINVAL;
@@ -1321,7 +1324,7 @@
return ERR_PTR(-EINVAL);
check_len:
- if (strlen(name) > TL_WWN_ADDR_LEN) {
+ if (strlen(name) >= TL_WWN_ADDR_LEN) {
printk(KERN_ERR "Emulated NAA %s Address: %s, exceeds"
" max: %d\n", name, tcm_loop_dump_proto_id(tl_hba),
TL_WWN_ADDR_LEN);
diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c
index ee6fad9..25c1f49 100644
--- a/drivers/target/target_core_configfs.c
+++ b/drivers/target/target_core_configfs.c
@@ -304,7 +304,7 @@
printk(KERN_ERR "Unable to locate passed fabric name\n");
return NULL;
}
- if (strlen(name) > TARGET_FABRIC_NAME_SIZE) {
+ if (strlen(name) >= TARGET_FABRIC_NAME_SIZE) {
printk(KERN_ERR "Passed name: %s exceeds TARGET_FABRIC"
"_NAME_SIZE\n", name);
return NULL;
@@ -312,7 +312,7 @@
tf = kzalloc(sizeof(struct target_fabric_configfs), GFP_KERNEL);
if (!(tf))
- return ERR_PTR(-ENOMEM);
+ return NULL;
INIT_LIST_HEAD(&tf->tf_list);
atomic_set(&tf->tf_access_cnt, 0);
@@ -851,7 +851,7 @@
return -EOPNOTSUPP;
}
- if ((strlen(page) + 1) > INQUIRY_VPD_SERIAL_LEN) {
+ if (strlen(page) >= INQUIRY_VPD_SERIAL_LEN) {
printk(KERN_ERR "Emulated VPD Unit Serial exceeds"
" INQUIRY_VPD_SERIAL_LEN: %d\n", INQUIRY_VPD_SERIAL_LEN);
return -EOVERFLOW;
@@ -917,7 +917,7 @@
transport_dump_vpd_proto_id(vpd, buf, VPD_TMP_BUF_SIZE);
- if ((len + strlen(buf) > PAGE_SIZE))
+ if ((len + strlen(buf) >= PAGE_SIZE))
break;
len += sprintf(page+len, "%s", buf);
@@ -962,19 +962,19 @@
\
memset(buf, 0, VPD_TMP_BUF_SIZE); \
transport_dump_vpd_assoc(vpd, buf, VPD_TMP_BUF_SIZE); \
- if ((len + strlen(buf) > PAGE_SIZE)) \
+ if ((len + strlen(buf) >= PAGE_SIZE)) \
break; \
len += sprintf(page+len, "%s", buf); \
\
memset(buf, 0, VPD_TMP_BUF_SIZE); \
transport_dump_vpd_ident_type(vpd, buf, VPD_TMP_BUF_SIZE); \
- if ((len + strlen(buf) > PAGE_SIZE)) \
+ if ((len + strlen(buf) >= PAGE_SIZE)) \
break; \
len += sprintf(page+len, "%s", buf); \
\
memset(buf, 0, VPD_TMP_BUF_SIZE); \
transport_dump_vpd_ident(vpd, buf, VPD_TMP_BUF_SIZE); \
- if ((len + strlen(buf) > PAGE_SIZE)) \
+ if ((len + strlen(buf) >= PAGE_SIZE)) \
break; \
len += sprintf(page+len, "%s", buf); \
} \
@@ -1299,7 +1299,7 @@
&i_buf[0] : "", pr_reg->pr_res_key,
pr_reg->pr_res_generation);
- if ((len + strlen(buf) > PAGE_SIZE))
+ if ((len + strlen(buf) >= PAGE_SIZE))
break;
len += sprintf(page+len, "%s", buf);
@@ -1496,7 +1496,7 @@
ret = -ENOMEM;
goto out;
}
- if (strlen(i_port) > PR_APTPL_MAX_IPORT_LEN) {
+ if (strlen(i_port) >= PR_APTPL_MAX_IPORT_LEN) {
printk(KERN_ERR "APTPL metadata initiator_node="
" exceeds PR_APTPL_MAX_IPORT_LEN: %d\n",
PR_APTPL_MAX_IPORT_LEN);
@@ -1510,7 +1510,7 @@
ret = -ENOMEM;
goto out;
}
- if (strlen(isid) > PR_REG_ISID_LEN) {
+ if (strlen(isid) >= PR_REG_ISID_LEN) {
printk(KERN_ERR "APTPL metadata initiator_isid"
"= exceeds PR_REG_ISID_LEN: %d\n",
PR_REG_ISID_LEN);
@@ -1571,7 +1571,7 @@
ret = -ENOMEM;
goto out;
}
- if (strlen(t_port) > PR_APTPL_MAX_TPORT_LEN) {
+ if (strlen(t_port) >= PR_APTPL_MAX_TPORT_LEN) {
printk(KERN_ERR "APTPL metadata target_node="
" exceeds PR_APTPL_MAX_TPORT_LEN: %d\n",
PR_APTPL_MAX_TPORT_LEN);
@@ -3052,7 +3052,7 @@
int ret;
memset(buf, 0, TARGET_CORE_NAME_MAX_LEN);
- if (strlen(name) > TARGET_CORE_NAME_MAX_LEN) {
+ if (strlen(name) >= TARGET_CORE_NAME_MAX_LEN) {
printk(KERN_ERR "Passed *name strlen(): %d exceeds"
" TARGET_CORE_NAME_MAX_LEN: %d\n", (int)strlen(name),
TARGET_CORE_NAME_MAX_LEN);
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 8407f9c..ba698ea 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -192,7 +192,7 @@
&SE_NODE_ACL(se_sess)->device_list[unpacked_lun];
if (deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) {
se_lun = se_cmd->se_lun = se_tmr->tmr_lun = deve->se_lun;
- dev = se_tmr->tmr_dev = se_lun->lun_se_dev;
+ dev = se_lun->lun_se_dev;
se_cmd->pr_res_key = deve->pr_res_key;
se_cmd->orig_fe_lun = unpacked_lun;
se_cmd->se_orig_obj_ptr = SE_LUN(se_cmd)->lun_se_dev;
@@ -216,6 +216,7 @@
se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION;
return -1;
}
+ se_tmr->tmr_dev = dev;
spin_lock(&dev->se_tmr_lock);
list_add_tail(&se_tmr->tmr_list, &dev->dev_tmr_list);
@@ -1430,7 +1431,7 @@
struct se_lun_acl *lacl;
struct se_node_acl *nacl;
- if (strlen(initiatorname) > TRANSPORT_IQN_LEN) {
+ if (strlen(initiatorname) >= TRANSPORT_IQN_LEN) {
printk(KERN_ERR "%s InitiatorName exceeds maximum size.\n",
TPG_TFO(tpg)->get_fabric_name());
*ret = -EOVERFLOW;
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index a79f518..b662db3 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -1916,7 +1916,7 @@
pr_reg->pr_res_mapped_lun);
}
- if ((len + strlen(tmp) > pr_aptpl_buf_len)) {
+ if ((len + strlen(tmp) >= pr_aptpl_buf_len)) {
printk(KERN_ERR "Unable to update renaming"
" APTPL metadata\n");
spin_unlock(&T10_RES(su_dev)->registration_lock);
@@ -1934,7 +1934,7 @@
TPG_TFO(tpg)->tpg_get_tag(tpg),
lun->lun_sep->sep_rtpi, lun->unpacked_lun, reg_count);
- if ((len + strlen(tmp) > pr_aptpl_buf_len)) {
+ if ((len + strlen(tmp) >= pr_aptpl_buf_len)) {
printk(KERN_ERR "Unable to update renaming"
" APTPL metadata\n");
spin_unlock(&T10_RES(su_dev)->registration_lock);
@@ -1986,7 +1986,7 @@
memset(iov, 0, sizeof(struct iovec));
memset(path, 0, 512);
- if (strlen(&wwn->unit_serial[0]) > 512) {
+ if (strlen(&wwn->unit_serial[0]) >= 512) {
printk(KERN_ERR "WWN value for struct se_device does not fit"
" into path buffer\n");
return -1;
diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index 59b8b9c..179063d 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -75,10 +75,16 @@
{
struct se_device *dev = tmr->tmr_dev;
+ if (!dev) {
+ kmem_cache_free(se_tmr_req_cache, tmr);
+ return;
+ }
+
spin_lock(&dev->se_tmr_lock);
list_del(&tmr->tmr_list);
- kmem_cache_free(se_tmr_req_cache, tmr);
spin_unlock(&dev->se_tmr_lock);
+
+ kmem_cache_free(se_tmr_req_cache, tmr);
}
static void core_tmr_handle_tas_abort(
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 4dafeb8..4b9b716 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -536,13 +536,13 @@
void transport_deregister_session_configfs(struct se_session *se_sess)
{
struct se_node_acl *se_nacl;
-
+ unsigned long flags;
/*
* Used by struct se_node_acl's under ConfigFS to locate active struct se_session
*/
se_nacl = se_sess->se_node_acl;
if ((se_nacl)) {
- spin_lock_irq(&se_nacl->nacl_sess_lock);
+ spin_lock_irqsave(&se_nacl->nacl_sess_lock, flags);
list_del(&se_sess->sess_acl_list);
/*
* If the session list is empty, then clear the pointer.
@@ -556,7 +556,7 @@
se_nacl->acl_sess_list.prev,
struct se_session, sess_acl_list);
}
- spin_unlock_irq(&se_nacl->nacl_sess_lock);
+ spin_unlock_irqrestore(&se_nacl->nacl_sess_lock, flags);
}
}
EXPORT_SYMBOL(transport_deregister_session_configfs);
diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h
index defff32..7b82f1b 100644
--- a/drivers/target/tcm_fc/tcm_fc.h
+++ b/drivers/target/tcm_fc/tcm_fc.h
@@ -144,7 +144,7 @@
*/
struct ft_cmd {
enum ft_cmd_state state;
- u16 lun; /* LUN from request */
+ u32 lun; /* LUN from request */
struct ft_sess *sess; /* session held for cmd */
struct fc_seq *seq; /* sequence in exchange mgr */
struct se_cmd se_cmd; /* Local TCM I/O descriptor */
diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c
index c056a11..b2a1067 100644
--- a/drivers/target/tcm_fc/tfc_cmd.c
+++ b/drivers/target/tcm_fc/tfc_cmd.c
@@ -94,29 +94,6 @@
16, 4, cmd->cdb, MAX_COMMAND_SIZE, 0);
}
-/*
- * Get LUN from CDB.
- */
-static int ft_get_lun_for_cmd(struct ft_cmd *cmd, u8 *lunp)
-{
- u64 lun;
-
- lun = lunp[1];
- switch (lunp[0] >> 6) {
- case 0:
- break;
- case 1:
- lun |= (lunp[0] & 0x3f) << 8;
- break;
- default:
- return -1;
- }
- if (lun >= TRANSPORT_MAX_LUNS_PER_TPG)
- return -1;
- cmd->lun = lun;
- return transport_get_lun_for_cmd(&cmd->se_cmd, NULL, lun);
-}
-
static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd)
{
struct se_queue_obj *qobj;
@@ -418,6 +395,7 @@
{
struct se_tmr_req *tmr;
struct fcp_cmnd *fcp;
+ struct ft_sess *sess;
u8 tm_func;
fcp = fc_frame_payload_get(cmd->req_frame, sizeof(*fcp));
@@ -425,13 +403,6 @@
switch (fcp->fc_tm_flags) {
case FCP_TMF_LUN_RESET:
tm_func = TMR_LUN_RESET;
- if (ft_get_lun_for_cmd(cmd, fcp->fc_lun) < 0) {
- ft_dump_cmd(cmd, __func__);
- transport_send_check_condition_and_sense(&cmd->se_cmd,
- cmd->se_cmd.scsi_sense_reason, 0);
- ft_sess_put(cmd->sess);
- return;
- }
break;
case FCP_TMF_TGT_RESET:
tm_func = TMR_TARGET_WARM_RESET;
@@ -463,6 +434,36 @@
return;
}
cmd->se_cmd.se_tmr_req = tmr;
+
+ switch (fcp->fc_tm_flags) {
+ case FCP_TMF_LUN_RESET:
+ cmd->lun = scsilun_to_int((struct scsi_lun *)fcp->fc_lun);
+ if (transport_get_lun_for_tmr(&cmd->se_cmd, cmd->lun) < 0) {
+ /*
+ * Make sure to clean up newly allocated TMR request
+ * since "unable to handle TMR request because failed
+ * to get to LUN"
+ */
+ FT_TM_DBG("Failed to get LUN for TMR func %d, "
+ "se_cmd %p, unpacked_lun %d\n",
+ tm_func, &cmd->se_cmd, cmd->lun);
+ ft_dump_cmd(cmd, __func__);
+ sess = cmd->sess;
+ transport_send_check_condition_and_sense(&cmd->se_cmd,
+ cmd->se_cmd.scsi_sense_reason, 0);
+ transport_generic_free_cmd(&cmd->se_cmd, 0, 1, 0);
+ ft_sess_put(sess);
+ return;
+ }
+ break;
+ case FCP_TMF_TGT_RESET:
+ case FCP_TMF_CLR_TASK_SET:
+ case FCP_TMF_ABT_TASK_SET:
+ case FCP_TMF_CLR_ACA:
+ break;
+ default:
+ return;
+ }
transport_generic_handle_tmr(&cmd->se_cmd);
}
@@ -635,7 +636,8 @@
fc_seq_exch(cmd->seq)->lp->tt.seq_set_resp(cmd->seq, ft_recv_seq, cmd);
- ret = ft_get_lun_for_cmd(cmd, fcp->fc_lun);
+ cmd->lun = scsilun_to_int((struct scsi_lun *)fcp->fc_lun);
+ ret = transport_get_lun_for_cmd(&cmd->se_cmd, NULL, cmd->lun);
if (ret < 0) {
ft_dump_cmd(cmd, __func__);
transport_send_check_condition_and_sense(&cmd->se_cmd,
diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c
index 4c3c0ef..8c4a240 100644
--- a/drivers/target/tcm_fc/tfc_io.c
+++ b/drivers/target/tcm_fc/tfc_io.c
@@ -203,7 +203,7 @@
/* XXX For now, initiator will retry */
if (printk_ratelimit())
printk(KERN_ERR "%s: Failed to send frame %p, "
- "xid <0x%x>, remaining <0x%x>, "
+ "xid <0x%x>, remaining %zu, "
"lso_max <0x%x>\n",
__func__, fp, ep->xid,
remaining, lport->lso_max);
diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c
index a3bd57f..7491e21 100644
--- a/drivers/target/tcm_fc/tfc_sess.c
+++ b/drivers/target/tcm_fc/tfc_sess.c
@@ -229,7 +229,7 @@
return NULL;
sess->se_sess = transport_init_session();
- if (!sess->se_sess) {
+ if (IS_ERR(sess->se_sess)) {
kfree(sess);
return NULL;
}
@@ -332,7 +332,7 @@
lport = sess->tport->lport;
port_id = sess->port_id;
if (port_id == -1) {
- mutex_lock(&ft_lport_lock);
+ mutex_unlock(&ft_lport_lock);
return;
}
FT_SESS_DBG("port_id %x\n", port_id);
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 09e8c7d..19b4ae0 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -875,7 +875,8 @@
*dp++ = last << 7 | first << 6 | 1; /* EA */
len--;
}
- memcpy(dp, skb_pull(dlci->skb, len), len);
+ memcpy(dp, dlci->skb->data, len);
+ skb_pull(dlci->skb, len);
__gsm_data_queue(dlci, msg);
if (last)
dlci->skb = NULL;
@@ -984,10 +985,22 @@
*/
static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
- u32 modem)
+ u32 modem, int clen)
{
int mlines = 0;
- u8 brk = modem >> 6;
+ u8 brk = 0;
+
+ /* The modem status command can either contain one octet (v.24 signals)
+ or two octets (v.24 signals + break signals). The length field will
+ either be 2 or 3 respectively. This is specified in section
+ 5.4.6.3.7 of the 27.010 mux spec. */
+
+ if (clen == 2)
+ modem = modem & 0x7f;
+ else {
+ brk = modem & 0x7f;
+ modem = (modem >> 7) & 0x7f;
+ };
/* Flow control/ready to communicate */
if (modem & MDM_FC) {
@@ -1061,7 +1074,7 @@
return;
}
tty = tty_port_tty_get(&dlci->port);
- gsm_process_modem(tty, dlci, modem);
+ gsm_process_modem(tty, dlci, modem, clen);
if (tty) {
tty_wakeup(tty);
tty_kref_put(tty);
@@ -1482,12 +1495,13 @@
* open we shovel the bits down it, if not we drop them.
*/
-static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len)
+static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen)
{
/* krefs .. */
struct tty_port *port = &dlci->port;
struct tty_struct *tty = tty_port_tty_get(port);
unsigned int modem = 0;
+ int len = clen;
if (debug & 16)
pr_debug("%d bytes for tty %p\n", len, tty);
@@ -1507,7 +1521,7 @@
if (len == 0)
return;
}
- gsm_process_modem(tty, dlci, modem);
+ gsm_process_modem(tty, dlci, modem, clen);
/* Line state will go via DLCI 0 controls only */
case 1:
default:
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 0ad3288..c3954fb 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1815,6 +1815,7 @@
/* FIXME: does n_tty_set_room need locking ? */
n_tty_set_room(tty);
timeout = schedule_timeout(timeout);
+ BUG_ON(!tty->read_buf);
continue;
}
__set_current_state(TASK_RUNNING);
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index b40f7b9..b4129f5 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -3318,6 +3318,7 @@
uart->port.flags &= ~UPF_BOOT_AUTOCONF;
uart->port.type = PORT_UNKNOWN;
uart->port.dev = &serial8250_isa_devs->dev;
+ uart->capabilities = uart_config[uart->port.type].flags;
uart_add_one_port(&serial8250_reg, &uart->port);
} else {
uart->port.dev = NULL;
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 4b4968a..f41b425 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -973,7 +973,7 @@
static int
pci_omegapci_setup(struct serial_private *priv,
- struct pciserial_board *board,
+ const struct pciserial_board *board,
struct uart_port *port, int idx)
{
return setup_port(priv, port, 2, idx * 8, 0);
@@ -994,6 +994,15 @@
return pci_default_setup(priv, board, port, idx);
}
+static int pci_eg20t_init(struct pci_dev *dev)
+{
+#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE)
+ return -ENODEV;
+#else
+ return 0;
+#endif
+}
+
/* This should be in linux/pci_ids.h */
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
@@ -1446,6 +1455,56 @@
.init = pci_oxsemi_tornado_init,
.setup = pci_default_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8811,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8812,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8813,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = 0x8814,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x8027,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x8028,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x8029,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x800C,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x800D,
+ .init = pci_eg20t_init,
+ },
+ {
+ .vendor = 0x10DB,
+ .device = 0x800D,
+ .init = pci_eg20t_init,
+ },
/*
* Cronyx Omega PCI (PLX-chip based)
*/
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 8dc0541..f5f6831 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -50,6 +50,7 @@
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
+#include <linux/delay.h>
#include <asm/io.h>
#include <asm/sizes.h>
@@ -65,6 +66,30 @@
#define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
#define UART_DUMMY_DR_RX (1 << 16)
+
+#define UART_WA_SAVE_NR 14
+
+static void pl011_lockup_wa(unsigned long data);
+static const u32 uart_wa_reg[UART_WA_SAVE_NR] = {
+ ST_UART011_DMAWM,
+ ST_UART011_TIMEOUT,
+ ST_UART011_LCRH_RX,
+ UART011_IBRD,
+ UART011_FBRD,
+ ST_UART011_LCRH_TX,
+ UART011_IFLS,
+ ST_UART011_XFCR,
+ ST_UART011_XON1,
+ ST_UART011_XON2,
+ ST_UART011_XOFF1,
+ ST_UART011_XOFF2,
+ UART011_CR,
+ UART011_IMSC
+};
+
+static u32 uart_wa_regdata[UART_WA_SAVE_NR];
+static DECLARE_TASKLET(pl011_lockup_tlet, pl011_lockup_wa, 0);
+
/* There is by now at least one vendor with differing details, so handle it */
struct vendor_data {
unsigned int ifls;
@@ -72,6 +97,7 @@
unsigned int lcrh_tx;
unsigned int lcrh_rx;
bool oversampling;
+ bool interrupt_may_hang; /* vendor-specific */
bool dma_threshold;
};
@@ -90,9 +116,12 @@
.lcrh_tx = ST_UART011_LCRH_TX,
.lcrh_rx = ST_UART011_LCRH_RX,
.oversampling = true,
+ .interrupt_may_hang = true,
.dma_threshold = true,
};
+static struct uart_amba_port *amba_ports[UART_NR];
+
/* Deals with DMA transactions */
struct pl011_sgbuf {
@@ -132,6 +161,7 @@
unsigned int lcrh_rx; /* vendor-specific */
bool autorts;
char type[12];
+ bool interrupt_may_hang; /* vendor-specific */
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
bool using_tx_dma;
@@ -1008,6 +1038,68 @@
#endif
+/*
+ * pl011_lockup_wa
+ * This workaround aims to break the deadlock situation
+ * when after long transfer over uart in hardware flow
+ * control, uart interrupt registers cannot be cleared.
+ * Hence uart transfer gets blocked.
+ *
+ * It is seen that during such deadlock condition ICR
+ * don't get cleared even on multiple write. This leads
+ * pass_counter to decrease and finally reach zero. This
+ * can be taken as trigger point to run this UART_BT_WA.
+ *
+ */
+static void pl011_lockup_wa(unsigned long data)
+{
+ struct uart_amba_port *uap = amba_ports[0];
+ void __iomem *base = uap->port.membase;
+ struct circ_buf *xmit = &uap->port.state->xmit;
+ struct tty_struct *tty = uap->port.state->port.tty;
+ int buf_empty_retries = 200;
+ int loop;
+
+ /* Stop HCI layer from submitting data for tx */
+ tty->hw_stopped = 1;
+ while (!uart_circ_empty(xmit)) {
+ if (buf_empty_retries-- == 0)
+ break;
+ udelay(100);
+ }
+
+ /* Backup registers */
+ for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
+ uart_wa_regdata[loop] = readl(base + uart_wa_reg[loop]);
+
+ /* Disable UART so that FIFO data is flushed out */
+ writew(0x00, uap->port.membase + UART011_CR);
+
+ /* Soft reset UART module */
+ if (uap->port.dev->platform_data) {
+ struct amba_pl011_data *plat;
+
+ plat = uap->port.dev->platform_data;
+ if (plat->reset)
+ plat->reset();
+ }
+
+ /* Restore registers */
+ for (loop = 0; loop < UART_WA_SAVE_NR; loop++)
+ writew(uart_wa_regdata[loop] ,
+ uap->port.membase + uart_wa_reg[loop]);
+
+ /* Initialise the old status of the modem signals */
+ uap->old_status = readw(uap->port.membase + UART01x_FR) &
+ UART01x_FR_MODEM_ANY;
+
+ if (readl(base + UART011_MIS) & 0x2)
+ printk(KERN_EMERG "UART_BT_WA: ***FAILED***\n");
+
+ /* Start Tx/Rx */
+ tty->hw_stopped = 0;
+}
+
static void pl011_stop_tx(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1158,8 +1250,11 @@
if (status & UART011_TXIS)
pl011_tx_chars(uap);
- if (pass_counter-- == 0)
+ if (pass_counter-- == 0) {
+ if (uap->interrupt_may_hang)
+ tasklet_schedule(&pl011_lockup_tlet);
break;
+ }
status = readw(uap->port.membase + UART011_MIS);
} while (status != 0);
@@ -1339,6 +1434,14 @@
writew(uap->im, uap->port.membase + UART011_IMSC);
spin_unlock_irq(&uap->port.lock);
+ if (uap->port.dev->platform_data) {
+ struct amba_pl011_data *plat;
+
+ plat = uap->port.dev->platform_data;
+ if (plat->init)
+ plat->init();
+ }
+
return 0;
clk_dis:
@@ -1394,6 +1497,15 @@
* Shut down the clock producer
*/
clk_disable(uap->clk);
+
+ if (uap->port.dev->platform_data) {
+ struct amba_pl011_data *plat;
+
+ plat = uap->port.dev->platform_data;
+ if (plat->exit)
+ plat->exit();
+ }
+
}
static void
@@ -1700,6 +1812,14 @@
if (!uap)
return -ENODEV;
+ if (uap->port.dev->platform_data) {
+ struct amba_pl011_data *plat;
+
+ plat = uap->port.dev->platform_data;
+ if (plat->init)
+ plat->init();
+ }
+
uap->port.uartclk = clk_get_rate(uap->clk);
if (options)
@@ -1774,6 +1894,7 @@
uap->lcrh_rx = vendor->lcrh_rx;
uap->lcrh_tx = vendor->lcrh_tx;
uap->fifosize = vendor->fifosize;
+ uap->interrupt_may_hang = vendor->interrupt_may_hang;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 6d5d6e6..af9b781 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1709,12 +1709,13 @@
static int __devinit atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *port;
+ struct atmel_uart_data *pdata = pdev->dev.platform_data;
void *data;
int ret;
BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
- port = &atmel_ports[pdev->id];
+ port = &atmel_ports[pdata->num];
port->backup_imr = 0;
atmel_init_port(port, pdev);
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index a1a0e55..c0b68b9 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -250,6 +250,20 @@
/* get overrun/fifo empty information from ier
* register */
iestat = bcm_uart_readl(port, UART_IR_REG);
+
+ if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
+ unsigned int val;
+
+ /* fifo reset is required to clear
+ * interrupt */
+ val = bcm_uart_readl(port, UART_CTL_REG);
+ val |= UART_CTL_RSTRXFIFO_MASK;
+ bcm_uart_writel(port, val, UART_CTL_REG);
+
+ port->icount.overrun++;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+
if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
break;
@@ -284,10 +298,6 @@
if (uart_handle_sysrq_char(port, c))
continue;
- if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
- port->icount.overrun++;
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
if ((cstat & port->ignore_status_mask) == 0)
tty_insert_flip_char(tty, c, flag);
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index 18f5484..96da178 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -125,7 +125,7 @@
brd->bd_uart_offset = 0x200;
brd->bd_dividend = 921600;
- brd->re_map_membase = ioremap(brd->membase, 0x1000);
+ brd->re_map_membase = ioremap(brd->membase, pci_resource_len(pdev, 0));
if (!brd->re_map_membase) {
dev_err(&pdev->dev,
"card has no PCI Memory resources, "
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 1bd2845..a764bf9 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -421,7 +421,6 @@
int ret = 0;
struct circ_buf *xmit = &max->con_xmit;
- init_waitqueue_head(wq);
pr_info(PR_FMT "start main thread\n");
do {
@@ -823,7 +822,7 @@
res = RC_TAG;
ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0);
if (ret < 0 || res == 0 || res == 0xffff) {
- printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)",
+ dev_dbg(&spi->dev, "MAX3111 deemed not present (conf reg %04x)",
res);
ret = -ENODEV;
goto err_get_page;
@@ -838,6 +837,8 @@
max->con_xmit.head = 0;
max->con_xmit.tail = 0;
+ init_waitqueue_head(&max->wq);
+
max->main_thread = kthread_run(max3110_main_thread,
max, "max3110_main");
if (IS_ERR(max->main_thread)) {
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index f2cb750..4652109 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1397,6 +1397,7 @@
int fifosize, base_baud;
int port_type;
struct pch_uart_driver_data *board;
+ const char *board_name;
board = &drv_dat[id->driver_data];
port_type = board->port_type;
@@ -1412,7 +1413,8 @@
base_baud = 1843200; /* 1.8432MHz */
/* quirk for CM-iTC board */
- if (strstr(dmi_get_system_info(DMI_BOARD_NAME), "CM-iTC"))
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+ if (board_name && strstr(board_name, "CM-iTC"))
base_baud = 192000000; /* 192.0MHz */
switch (port_type) {
diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c
index fb2619f..dd194dc 100644
--- a/drivers/tty/serial/s5pv210.c
+++ b/drivers/tty/serial/s5pv210.c
@@ -30,7 +30,7 @@
struct s3c2410_uartcfg *cfg = port->dev->platform_data;
unsigned long ucon = rd_regl(port, S3C2410_UCON);
- if ((cfg->clocks_size) == 1)
+ if (cfg->flags & NO_NEED_CHECK_CLKSRC)
return 0;
if (strcmp(clk->name, "pclk") == 0)
@@ -55,7 +55,7 @@
clk->divisor = 1;
- if ((cfg->clocks_size) == 1)
+ if (cfg->flags & NO_NEED_CHECK_CLKSRC)
return 0;
switch (ucon & S5PV210_UCON_CLKMASK) {
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index f1a7918..6c9b7cd 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -413,8 +413,7 @@
spin_lock_irqsave(&tty->buf.lock, flags);
if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
- struct tty_buffer *head, *tail = tty->buf.tail;
- int seen_tail = 0;
+ struct tty_buffer *head;
while ((head = tty->buf.head) != NULL) {
int count;
char *char_buf;
@@ -424,15 +423,6 @@
if (!count) {
if (head->next == NULL)
break;
- /*
- There's a possibility tty might get new buffer
- added during the unlock window below. We could
- end up spinning in here forever hogging the CPU
- completely. To avoid this let's have a rest each
- time we processed the tail buffer.
- */
- if (tail == head)
- seen_tail = 1;
tty->buf.head = head->next;
tty_buffer_free(tty, head);
continue;
@@ -442,7 +432,7 @@
line discipline as we want to empty the queue */
if (test_bit(TTY_FLUSHPENDING, &tty->flags))
break;
- if (!tty->receive_room || seen_tail)
+ if (!tty->receive_room)
break;
if (count > tty->receive_room)
count = tty->receive_room;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 5d01d32..ef925d5 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -555,7 +555,7 @@
static int tty_ldisc_wait_idle(struct tty_struct *tty)
{
int ret;
- ret = wait_event_interruptible_timeout(tty_ldisc_idle,
+ ret = wait_event_timeout(tty_ldisc_idle,
atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
if (ret < 0)
return ret;
@@ -763,6 +763,8 @@
if (IS_ERR(ld))
return -1;
+ WARN_ON_ONCE(tty_ldisc_wait_idle(tty));
+
tty_ldisc_close(tty, tty->ldisc);
tty_ldisc_put(tty->ldisc);
tty->ldisc = NULL;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 395a347..dac7676 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1530,6 +1530,8 @@
{ NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
{ NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
{ NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0335), }, /* Nokia E7 */
+ { NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */
{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index e35a176..34e3da5 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -375,7 +375,7 @@
* Just re-enable it without affecting the endpoint toggles.
*/
usb_enable_interface(udev, intf, false);
- } else if (!error && !intf->dev.power.in_suspend) {
+ } else if (!error && !intf->dev.power.is_prepared) {
r = usb_set_interface(udev, intf->altsetting[0].
desc.bInterfaceNumber, 0);
if (r < 0)
@@ -960,7 +960,7 @@
}
/* Try to rebind the interface */
- if (!intf->dev.power.in_suspend) {
+ if (!intf->dev.power.is_prepared) {
intf->needs_binding = 0;
rc = device_attach(&intf->dev);
if (rc < 0)
@@ -1107,7 +1107,7 @@
if (intf->condition == USB_INTERFACE_UNBOUND) {
/* Carry out a deferred switch to altsetting 0 */
- if (intf->needs_altsetting0 && !intf->dev.power.in_suspend) {
+ if (intf->needs_altsetting0 && !intf->dev.power.is_prepared) {
usb_set_interface(udev, intf->altsetting[0].
desc.bInterfaceNumber, 0);
intf->needs_altsetting0 = 0;
@@ -1187,13 +1187,22 @@
for (i = n - 1; i >= 0; --i) {
intf = udev->actconfig->interface[i];
status = usb_suspend_interface(udev, intf, msg);
+
+ /* Ignore errors during system sleep transitions */
+ if (!(msg.event & PM_EVENT_AUTO))
+ status = 0;
if (status != 0)
break;
}
}
- if (status == 0)
+ if (status == 0) {
status = usb_suspend_device(udev, msg);
+ /* Again, ignore errors during system sleep transitions */
+ if (!(msg.event & PM_EVENT_AUTO))
+ status = 0;
+ }
+
/* If the suspend failed, resume interfaces that did get suspended */
if (status != 0) {
msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 79a58c3..a428aa0 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -339,7 +339,8 @@
{
int i, status = -ETIMEDOUT;
- for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+ for (i = 0; i < USB_STS_RETRIES &&
+ (status == -ETIMEDOUT || status == -EPIPE); i++) {
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
data, sizeof(*data), USB_STS_TIMEOUT);
@@ -355,7 +356,8 @@
{
int i, status = -ETIMEDOUT;
- for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+ for (i = 0; i < USB_STS_RETRIES &&
+ (status == -ETIMEDOUT || status == -EPIPE); i++) {
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1,
data, sizeof(*data), USB_STS_TIMEOUT);
@@ -1632,6 +1634,7 @@
{
struct usb_device *udev = *pdev;
int i;
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
if (!udev) {
pr_debug ("%s nodev\n", __func__);
@@ -1659,7 +1662,9 @@
* so that the hardware is now fully quiesced.
*/
dev_dbg (&udev->dev, "unregistering device\n");
+ mutex_lock(hcd->bandwidth_mutex);
usb_disable_device(udev, 0);
+ mutex_unlock(hcd->bandwidth_mutex);
usb_hcd_synchronize_unlinks(udev);
usb_remove_ep_devs(&udev->ep0);
@@ -2360,6 +2365,10 @@
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
USB_CTRL_SET_TIMEOUT);
+
+ /* System sleep transitions should never fail */
+ if (!(msg.event & PM_EVENT_AUTO))
+ status = 0;
} else {
/* device has up to 10 msec to fully suspend */
dev_dbg(&udev->dev, "usb %ssuspend\n",
@@ -2609,16 +2618,15 @@
struct usb_device *hdev = hub->hdev;
unsigned port1;
- /* fail if children aren't already suspended */
+ /* Warn if children aren't already suspended */
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
struct usb_device *udev;
udev = hdev->children [port1-1];
if (udev && udev->can_submit) {
- if (!(msg.event & PM_EVENT_AUTO))
- dev_dbg(&intf->dev, "port %d nyet suspended\n",
- port1);
- return -EBUSY;
+ dev_warn(&intf->dev, "port %d nyet suspended\n", port1);
+ if (msg.event & PM_EVENT_AUTO)
+ return -EBUSY;
}
}
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 1b125c2..2278dad 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -389,7 +389,6 @@
mutex_unlock(&inode->i_mutex);
if (!error)
d_delete(dentry);
- dput(dentry);
return error;
}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 5701e85..0b5ec23 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1135,15 +1135,26 @@
* Deallocates hcd/hardware state for the endpoints (nuking all or most
* pending urbs) and usbcore state for the interfaces, so that usbcore
* must usb_set_configuration() before any interfaces could be used.
+ *
+ * Must be called with hcd->bandwidth_mutex held.
*/
void usb_disable_device(struct usb_device *dev, int skip_ep0)
{
int i;
+ struct usb_hcd *hcd = bus_to_hcd(dev->bus);
/* getting rid of interfaces will disconnect
* any drivers bound to them (a key side effect)
*/
if (dev->actconfig) {
+ /*
+ * FIXME: In order to avoid self-deadlock involving the
+ * bandwidth_mutex, we have to mark all the interfaces
+ * before unregistering any of them.
+ */
+ for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++)
+ dev->actconfig->interface[i]->unregistering = 1;
+
for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
struct usb_interface *interface;
@@ -1153,7 +1164,6 @@
continue;
dev_dbg(&dev->dev, "unregistering interface %s\n",
dev_name(&interface->dev));
- interface->unregistering = 1;
remove_intf_ep_devs(interface);
device_del(&interface->dev);
}
@@ -1172,6 +1182,16 @@
dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
skip_ep0 ? "non-ep0" : "all");
+ if (hcd->driver->check_bandwidth) {
+ /* First pass: Cancel URBs, leave endpoint pointers intact. */
+ for (i = skip_ep0; i < 16; ++i) {
+ usb_disable_endpoint(dev, i, false);
+ usb_disable_endpoint(dev, i + USB_DIR_IN, false);
+ }
+ /* Remove endpoints from the host controller internal state */
+ usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+ /* Second pass: remove endpoint pointers */
+ }
for (i = skip_ep0; i < 16; ++i) {
usb_disable_endpoint(dev, i, true);
usb_disable_endpoint(dev, i + USB_DIR_IN, true);
@@ -1273,6 +1293,8 @@
interface);
return -EINVAL;
}
+ if (iface->unregistering)
+ return -ENODEV;
alt = usb_altnum_to_altsetting(iface, alternate);
if (!alt) {
@@ -1727,6 +1749,7 @@
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
+ mutex_lock(hcd->bandwidth_mutex);
if (dev->state != USB_STATE_ADDRESS)
usb_disable_device(dev, 1); /* Skip ep0 */
@@ -1739,7 +1762,6 @@
* host controller will not allow submissions to dropped endpoints. If
* this call fails, the device state is unchanged.
*/
- mutex_lock(hcd->bandwidth_mutex);
ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
if (ret < 0) {
mutex_unlock(hcd->bandwidth_mutex);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 58456d1..029e288 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -632,13 +632,10 @@
endchoice
+# Selected by UDC drivers that support high-speed operation.
config USB_GADGET_DUALSPEED
bool
depends on USB_GADGET
- default n
- help
- Means that gadget drivers should include extra descriptors
- and code to handle dual-speed controllers.
#
# USB Gadget Drivers
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 6e42aab..95e8138 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -60,6 +60,7 @@
#include <linux/device.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <asm/system.h>
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 41dc093..f4690ff 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -38,6 +38,7 @@
#include <linux/clk.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <mach/hardware.h>
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 61ff927..d3dcabc 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1906,6 +1906,7 @@
if (!hcd)
return -ENOMEM;
the_controller = hcd_to_dummy (hcd);
+ hcd->has_tt = 1;
retval = usb_add_hcd(hcd, 0, 0);
if (retval != 0) {
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 2cd9a60..4e48331 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -46,7 +46,6 @@
#include <asm/system.h>
#include <asm/unaligned.h>
#include <asm/dma.h>
-#include <asm/cacheflush.h>
#include "fsl_usb2_udc.h"
@@ -118,6 +117,17 @@
#define fsl_readl(p) (*_fsl_readl)((p))
#define fsl_writel(v, p) (*_fsl_writel)((v), (p))
+static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata)
+{
+ if (pdata->big_endian_mmio) {
+ _fsl_readl = _fsl_readl_be;
+ _fsl_writel = _fsl_writel_be;
+ } else {
+ _fsl_readl = _fsl_readl_le;
+ _fsl_writel = _fsl_writel_le;
+ }
+}
+
static inline u32 cpu_to_hc32(const u32 x)
{
return udc_controller->pdata->big_endian_desc
@@ -132,6 +142,8 @@
: le32_to_cpu((__force __le32)x);
}
#else /* !CONFIG_PPC32 */
+static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata) {}
+
#define fsl_readl(addr) readl(addr)
#define fsl_writel(val32, addr) writel(val32, addr)
#define cpu_to_hc32(x) cpu_to_le32(x)
@@ -1277,6 +1289,11 @@
req->req.complete = NULL;
req->dtd_count = 0;
+ req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
+ req->req.buf, req->req.length,
+ ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ req->mapped = 1;
+
if (fsl_req_to_dtd(req) == 0)
fsl_queue_td(ep, req);
else
@@ -1348,9 +1365,6 @@
/* Fill in the reqest structure */
*((u16 *) req->req.buf) = cpu_to_le16(tmp);
- /* flush cache for the req buffer */
- flush_dcache_range((u32)req->req.buf, (u32)req->req.buf + 8);
-
req->ep = ep;
req->req.length = 2;
req->req.status = -EINPROGRESS;
@@ -1358,6 +1372,11 @@
req->req.complete = NULL;
req->dtd_count = 0;
+ req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
+ req->req.buf, req->req.length,
+ ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ req->mapped = 1;
+
/* prime the data phase */
if ((fsl_req_to_dtd(req) == 0))
fsl_queue_td(ep, req);
@@ -2354,7 +2373,6 @@
struct fsl_req, req);
/* allocate a small amount of memory to get valid address */
udc->status_req->req.buf = kmalloc(8, GFP_KERNEL);
- udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf);
udc->resume_state = USB_STATE_NOTATTACHED;
udc->usb_state = USB_STATE_POWERED;
@@ -2470,13 +2488,7 @@
}
/* Set accessors only after pdata->init() ! */
- if (pdata->big_endian_mmio) {
- _fsl_readl = _fsl_readl_be;
- _fsl_writel = _fsl_writel_be;
- } else {
- _fsl_readl = _fsl_readl_le;
- _fsl_writel = _fsl_writel_le;
- }
+ fsl_set_accessors(pdata);
#ifndef CONFIG_ARCH_MXC
if (pdata->have_sysif_regs)
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index a01383f..a56876a 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -431,8 +431,10 @@
/* halt any endpoint by doing a "wrong direction" i/o call */
if (!usb_endpoint_dir_in(&data->desc)) {
- if (usb_endpoint_xfer_isoc(&data->desc))
+ if (usb_endpoint_xfer_isoc(&data->desc)) {
+ mutex_unlock(&data->lock);
return -EINVAL;
+ }
DBG (data->dev, "%s halt\n", data->name);
spin_lock_irq (&data->dev->lock);
if (likely (data->ep != NULL))
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index b62b264..b1a8146 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -2083,7 +2083,7 @@
}
#ifdef CONFIG_PM
-static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state)
+static int mv_udc_suspend(struct device *_dev)
{
struct mv_udc *udc = the_controller;
@@ -2092,7 +2092,7 @@
return 0;
}
-static int mv_udc_resume(struct platform_device *_dev)
+static int mv_udc_resume(struct device *_dev)
{
struct mv_udc *udc = the_controller;
int retval;
@@ -2100,7 +2100,7 @@
retval = mv_udc_phy_init(udc->phy_regs);
if (retval) {
dev_err(_dev, "phy initialization error %d\n", retval);
- goto error;
+ return retval;
}
udc_reset(udc);
ep0_reset(udc);
@@ -2122,7 +2122,7 @@
.owner = THIS_MODULE,
.name = "pxa-u2o",
#ifdef CONFIG_PM
- .pm = mv_udc_pm_ops,
+ .pm = &mv_udc_pm_ops,
#endif
},
};
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 24696f7..476d88e 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -63,6 +63,7 @@
#include <linux/device.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <asm/io.h>
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 365c02f..7745454 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -2216,7 +2216,6 @@
if (retval != 0) {
pr_err("%s: can't get irq %i, err %d\n",
driver_name, LUBBOCK_USB_DISC_IRQ, retval);
-lubbock_fail0:
goto err_irq_lub;
}
retval = request_irq(LUBBOCK_USB_IRQ,
@@ -2226,7 +2225,6 @@
if (retval != 0) {
pr_err("%s: can't get irq %i, err %d\n",
driver_name, LUBBOCK_USB_IRQ, retval);
- free_irq(LUBBOCK_USB_DISC_IRQ, dev);
goto lubbock_fail0;
}
} else
@@ -2236,10 +2234,11 @@
return 0;
#ifdef CONFIG_ARCH_LUBBOCK
+lubbock_fail0:
free_irq(LUBBOCK_USB_DISC_IRQ, dev);
err_irq_lub:
-#endif
free_irq(irq, dev);
+#endif
err_irq1:
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index acb9cc4..0dfee28 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2680,9 +2680,9 @@
writel(0, hsotg->regs + S3C_DAINTMSK);
- dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
- readl(hsotg->regs + S3C_DIEPCTL0),
- readl(hsotg->regs + S3C_DOEPCTL0));
+ dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ readl(hsotg->regs + S3C_DIEPCTL0),
+ readl(hsotg->regs + S3C_DOEPCTL0));
/* enable in and out endpoint interrupts */
s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt);
@@ -2701,7 +2701,7 @@
udelay(10); /* see openiboot */
__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
- dev_info(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
+ dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
/* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by
writing to the EPCTL register.. */
@@ -2721,9 +2721,9 @@
s3c_hsotg_enqueue_setup(hsotg);
- dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
- readl(hsotg->regs + S3C_DIEPCTL0),
- readl(hsotg->regs + S3C_DOEPCTL0));
+ dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ readl(hsotg->regs + S3C_DIEPCTL0),
+ readl(hsotg->regs + S3C_DOEPCTL0));
/* clear global NAKs */
writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
@@ -2921,9 +2921,9 @@
/* setup fifos */
- dev_info(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
- readl(hsotg->regs + S3C_GRXFSIZ),
- readl(hsotg->regs + S3C_GNPTXFSIZ));
+ dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+ readl(hsotg->regs + S3C_GRXFSIZ),
+ readl(hsotg->regs + S3C_GNPTXFSIZ));
s3c_hsotg_init_fifo(hsotg);
@@ -2945,6 +2945,7 @@
static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
{
+#ifdef DEBUG
struct device *dev = hsotg->dev;
void __iomem *regs = hsotg->regs;
u32 val;
@@ -2987,6 +2988,7 @@
dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE));
+#endif
}
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index cfe3cf5..d5e3e1e 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -26,6 +26,7 @@
#include <linux/clk.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/udc.h>
@@ -1301,7 +1302,8 @@
hsudc->uclk = clk_get(&pdev->dev, "usb-device");
if (IS_ERR(hsudc->uclk)) {
dev_err(dev, "failed to find usb-device clock source\n");
- return PTR_ERR(hsudc->uclk);
+ ret = PTR_ERR(hsudc->uclk);
+ goto err_clk;
}
clk_enable(hsudc->uclk);
@@ -1310,7 +1312,8 @@
disable_irq(hsudc->irq);
local_irq_enable();
return 0;
-
+err_clk:
+ free_irq(hsudc->irq, hsudc);
err_irq:
iounmap(hsudc->regs);
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 6d8b040..100f263 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -36,6 +36,7 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/prefetch.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
diff --git a/drivers/usb/host/ehci-ath79.c b/drivers/usb/host/ehci-ath79.c
index 98cc8a1..aa248c2 100644
--- a/drivers/usb/host/ehci-ath79.c
+++ b/drivers/usb/host/ehci-ath79.c
@@ -44,7 +44,6 @@
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct platform_device *pdev = to_platform_device(hcd->self.controller);
const struct platform_device_id *id;
- int hclength;
int ret;
id = platform_get_device_id(pdev);
@@ -53,20 +52,23 @@
return -EINVAL;
}
- hclength = HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
switch (id->driver_data) {
case EHCI_ATH79_IP_V1:
ehci->has_synopsys_hc_bug = 1;
ehci->caps = hcd->regs;
- ehci->regs = hcd->regs + hclength;
+ ehci->regs = hcd->regs +
+ HC_LENGTH(ehci,
+ ehci_readl(ehci, &ehci->caps->hc_capbase));
break;
case EHCI_ATH79_IP_V2:
hcd->has_tt = 1;
ehci->caps = hcd->regs + 0x100;
- ehci->regs = hcd->regs + 0x100 + hclength;
+ ehci->regs = hcd->regs + 0x100 +
+ HC_LENGTH(ehci,
+ ehci_readl(ehci, &ehci->caps->hc_capbase));
break;
default:
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b435ed6..f8030ee 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1,4 +1,8 @@
/*
+ * Enhanced Host Controller Interface (EHCI) driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
* Copyright (c) 2000-2004 by David Brownell
*
* This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index c9e6e45..55d3d58 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1555,7 +1555,7 @@
/* We need to forcefully reclaim the slot since some transfers never
return, e.g. interrupt transfers and NAKed bulk transfers. */
- if (usb_pipebulk(urb->pipe)) {
+ if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) {
skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
skip_map |= (1 << qh->slot);
reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 9aa10bd..f9cf3f0 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1,5 +1,7 @@
/*
- * OHCI HCD (Host Controller Driver) for USB.
+ * Open Host Controller Interface (OHCI) driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index afef7b0..80be5472 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -312,8 +312,10 @@
return PTR_ERR(usb_clk);
hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
- if (!hcd)
- return -ENOMEM;
+ if (!hcd) {
+ retval = -ENOMEM;
+ goto err0;
+ }
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
@@ -368,6 +370,7 @@
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
+ err0:
clk_put(usb_clk);
return retval;
}
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index db6f8b9..4586369 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2517,6 +2517,7 @@
INIT_LIST_HEAD(&r8a66597->child_device);
hcd->rsrc_start = res->start;
+ hcd->has_tt = 1;
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
if (ret != 0) {
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 2e04861..1f50b44 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -438,13 +438,13 @@
struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
switch (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state))) {
- case 0:
+ case SLOT_STATE_ENABLED:
return "enabled/disabled";
- case 1:
+ case SLOT_STATE_DEFAULT:
return "default";
- case 2:
+ case SLOT_STATE_ADDRESSED:
return "addressed";
- case 3:
+ case SLOT_STATE_CONFIGURED:
return "configured";
default:
return "reserved";
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 26caba4..fcb7f7e 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -985,9 +985,19 @@
interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
if (interval != ep->desc.bInterval - 1)
dev_warn(&udev->dev,
- "ep %#x - rounding interval to %d microframes\n",
+ "ep %#x - rounding interval to %d %sframes\n",
ep->desc.bEndpointAddress,
- 1 << interval);
+ 1 << interval,
+ udev->speed == USB_SPEED_FULL ? "" : "micro");
+
+ if (udev->speed == USB_SPEED_FULL) {
+ /*
+ * Full speed isoc endpoints specify interval in frames,
+ * not microframes. We are using microframes everywhere,
+ * so adjust accordingly.
+ */
+ interval += 3; /* 1 frame = 2^3 uframes */
+ }
return interval;
}
@@ -1205,8 +1215,6 @@
ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
/* dig out max burst from ep companion desc */
max_packet = ep->ss_ep_comp.bMaxBurst;
- if (!max_packet)
- xhci_warn(xhci, "WARN no SS endpoint bMaxBurst\n");
ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet));
break;
case USB_SPEED_HIGH:
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c408e9f..cb16de2 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -29,6 +29,9 @@
#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
+#define PCI_VENDOR_ID_ETRON 0x1b6f
+#define PCI_DEVICE_ID_ASROCK_P67 0x7023
+
static const char hcd_name[] = "xhci_hcd";
/* called after powerup, by probe or system-pm "wakeup" */
@@ -106,12 +109,22 @@
/* Look for vendor-specific quirks */
if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
- pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
- pdev->revision == 0x0) {
+ pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
+ if (pdev->revision == 0x0) {
xhci->quirks |= XHCI_RESET_EP_QUIRK;
xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
" endpoint cmd after reset endpoint\n");
+ }
+ /* Fresco Logic confirms: all revisions of this chip do not
+ * support MSI, even though some of them claim to in their PCI
+ * capabilities.
+ */
+ xhci->quirks |= XHCI_BROKEN_MSI;
+ xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
+ "has broken MSI implementation\n",
+ pdev->revision);
}
+
if (pdev->vendor == PCI_VENDOR_ID_NEC)
xhci->quirks |= XHCI_NEC_HOST;
@@ -124,6 +137,11 @@
xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
xhci->limit_active_eps = 64;
}
+ if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+ pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+ xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
+ }
/* Make sure the HC is halted. */
retval = xhci_halt(xhci);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index cc1485b..70cacbb 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1733,6 +1733,7 @@
frame->status = -EOVERFLOW;
skip_td = true;
break;
+ case COMP_DEV_ERR:
case COMP_STALL:
frame->status = -EPROTO;
skip_td = true;
@@ -1767,9 +1768,6 @@
}
}
- if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS)
- *status = 0;
-
return finish_td(xhci, td, event_trb, event, ep, status, false);
}
@@ -1782,13 +1780,12 @@
struct usb_iso_packet_descriptor *frame;
int idx;
- ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+ ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
urb_priv = td->urb->hcpriv;
idx = urb_priv->td_cnt;
frame = &td->urb->iso_frame_desc[idx];
- /* The transfer is partly done */
- *status = -EXDEV;
+ /* The transfer is partly done. */
frame->status = -EXDEV;
/* calc actual length */
@@ -2016,6 +2013,10 @@
TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
ep_index);
goto cleanup;
+ case COMP_DEV_ERR:
+ xhci_warn(xhci, "WARN: detect an incompatible device");
+ status = -EPROTO;
+ break;
case COMP_MISSED_INT:
/*
* When encounter missed service error, one or more isoc tds
@@ -2063,6 +2064,20 @@
/* Is this a TRB in the currently executing TD? */
event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
td->last_trb, event_dma);
+
+ /*
+ * Skip the Force Stopped Event. The event_trb(event_dma) of FSE
+ * is not in the current TD pointed by ep_ring->dequeue because
+ * that the hardware dequeue pointer still at the previous TRB
+ * of the current TD. The previous TRB maybe a Link TD or the
+ * last TRB of the previous TD. The command completion handle
+ * will take care the rest.
+ */
+ if (!event_seg && trb_comp_code == COMP_STOP_INVAL) {
+ ret = 0;
+ goto cleanup;
+ }
+
if (!event_seg) {
if (!ep->skip ||
!usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
@@ -2158,6 +2173,11 @@
urb->transfer_buffer_length,
status);
spin_unlock(&xhci->lock);
+ /* EHCI, UHCI, and OHCI always unconditionally set the
+ * urb->status of an isochronous endpoint to 0.
+ */
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+ status = 0;
usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status);
spin_lock(&xhci->lock);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index d9660eb..f5fe1ac 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -430,12 +430,19 @@
free_irq(hcd->irq, hcd);
hcd->irq = -1;
+ /* Some Fresco Logic host controllers advertise MSI, but fail to
+ * generate interrupts. Don't even try to enable MSI.
+ */
+ if (xhci->quirks & XHCI_BROKEN_MSI)
+ goto legacy_irq;
+
ret = xhci_setup_msix(xhci);
if (ret)
/* fall back to msi*/
ret = xhci_setup_msi(xhci);
if (ret) {
+legacy_irq:
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
@@ -752,6 +759,8 @@
msleep(100);
spin_lock_irq(&xhci->lock);
+ if (xhci->quirks & XHCI_RESET_ON_RESUME)
+ hibernated = true;
if (!hibernated) {
/* step 1: restore register */
@@ -1394,6 +1403,7 @@
u32 added_ctxs;
unsigned int last_ctx;
u32 new_add_flags, new_drop_flags, new_slot_info;
+ struct xhci_virt_device *virt_dev;
int ret = 0;
ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
@@ -1418,11 +1428,25 @@
return 0;
}
- in_ctx = xhci->devs[udev->slot_id]->in_ctx;
- out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ virt_dev = xhci->devs[udev->slot_id];
+ in_ctx = virt_dev->in_ctx;
+ out_ctx = virt_dev->out_ctx;
ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ep_index = xhci_get_endpoint_index(&ep->desc);
ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+
+ /* If this endpoint is already in use, and the upper layers are trying
+ * to add it again without dropping it, reject the addition.
+ */
+ if (virt_dev->eps[ep_index].ring &&
+ !(le32_to_cpu(ctrl_ctx->drop_flags) &
+ xhci_get_endpoint_flag(&ep->desc))) {
+ xhci_warn(xhci, "Trying to add endpoint 0x%x "
+ "without dropping it.\n",
+ (unsigned int) ep->desc.bEndpointAddress);
+ return -EINVAL;
+ }
+
/* If the HCD has already noted the endpoint is enabled,
* ignore this request.
*/
@@ -1438,8 +1462,7 @@
* process context, not interrupt context (or so documenation
* for usb_set_interface() and usb_set_configuration() claim).
*/
- if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id],
- udev, ep, GFP_NOIO) < 0) {
+ if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) {
dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
__func__, ep->desc.bEndpointAddress);
return -ENOMEM;
@@ -1530,6 +1553,11 @@
"and endpoint is not disabled.\n");
ret = -EINVAL;
break;
+ case COMP_DEV_ERR:
+ dev_warn(&udev->dev, "ERROR: Incompatible device for endpoint "
+ "configure command.\n");
+ ret = -ENODEV;
+ break;
case COMP_SUCCESS:
dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
ret = 0;
@@ -1564,6 +1592,11 @@
xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1);
ret = -EINVAL;
break;
+ case COMP_DEV_ERR:
+ dev_warn(&udev->dev, "ERROR: Incompatible device for evaluate "
+ "context command.\n");
+ ret = -ENODEV;
+ break;
case COMP_MEL_ERR:
/* Max Exit Latency too large error */
dev_warn(&udev->dev, "WARN: Max Exit Latency too large\n");
@@ -1849,8 +1882,8 @@
/* Free any rings that were dropped, but not changed. */
for (i = 1; i < 31; ++i) {
- if ((ctrl_ctx->drop_flags & (1 << (i + 1))) &&
- !(ctrl_ctx->add_flags & (1 << (i + 1))))
+ if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) &&
+ !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1))))
xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
}
xhci_zero_in_ctx(xhci, virt_dev);
@@ -2467,6 +2500,7 @@
struct xhci_command *reset_device_cmd;
int timeleft;
int last_freed_endpoint;
+ struct xhci_slot_ctx *slot_ctx;
ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__);
if (ret <= 0)
@@ -2499,6 +2533,12 @@
return -EINVAL;
}
+ /* If device is not setup, there is no point in resetting it */
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
+ SLOT_STATE_DISABLED)
+ return 0;
+
xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
/* Allocate the command structure that holds the struct completion.
* Assume we're in process context, since the normal device reset
@@ -2839,6 +2879,11 @@
dev_warn(&udev->dev, "Device not responding to set address.\n");
ret = -EPROTO;
break;
+ case COMP_DEV_ERR:
+ dev_warn(&udev->dev, "ERROR: Incompatible device for address "
+ "device command.\n");
+ ret = -ENODEV;
+ break;
case COMP_SUCCESS:
xhci_dbg(xhci, "Successful Address Device command\n");
break;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ac0196e..d8bbf5c 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -560,6 +560,11 @@
#define SLOT_STATE (0x1f << 27)
#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
+#define SLOT_STATE_DISABLED 0
+#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED
+#define SLOT_STATE_DEFAULT 1
+#define SLOT_STATE_ADDRESSED 2
+#define SLOT_STATE_CONFIGURED 3
/**
* struct xhci_ep_ctx
@@ -869,6 +874,8 @@
#define COMP_PING_ERR 20
/* Event Ring is full */
#define COMP_ER_FULL 21
+/* Incompatible Device Error */
+#define COMP_DEV_ERR 22
/* Missed Service Error - HC couldn't service an isoc ep within interval */
#define COMP_MISSED_INT 23
/* Successfully stopped command ring */
@@ -1302,6 +1309,8 @@
* commands.
*/
#define XHCI_EP_LIMIT_QUIRK (1 << 5)
+#define XHCI_BROKEN_MSI (1 << 6)
+#define XHCI_RESET_ON_RESUME (1 << 7)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index ab8e100..c71b037 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -96,6 +96,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/kobject.h>
+#include <linux/prefetch.h>
#include <linux/platform_device.h>
#include <linux/io.h>
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 0a50a35..6aeb363 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1524,6 +1524,12 @@
csr = musb_readw(epio, MUSB_TXCSR);
if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS;
+ /*
+ * Setting both TXPKTRDY and FLUSHFIFO makes controller
+ * to interrupt current FIFO loading, but not flushing
+ * the already loaded ones.
+ */
+ csr &= ~MUSB_TXCSR_TXPKTRDY;
musb_writew(epio, MUSB_TXCSR, csr);
/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
musb_writew(epio, MUSB_TXCSR, csr);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 7295e31..8b2473f 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1575,7 +1575,7 @@
/* even if there was an error, we did the dma
* for iso_frame_desc->length
*/
- if (d->status != EILSEQ && d->status != -EOVERFLOW)
+ if (d->status != -EILSEQ && d->status != -EOVERFLOW)
d->status = 0;
if (++qh->iso_idx >= urb->number_of_packets)
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 206cfab..547486c 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -1380,5 +1380,6 @@
{
struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+ kfree(gpriv->uep);
kfree(gpriv);
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index e8dbde5..2e06b90 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -179,6 +179,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
@@ -647,6 +648,7 @@
{ USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
@@ -847,7 +849,8 @@
[FT2232C] = "FT2232C",
[FT232RL] = "FT232RL",
[FT2232H] = "FT2232H",
- [FT4232H] = "FT4232H"
+ [FT4232H] = "FT4232H",
+ [FT232H] = "FT232H"
};
@@ -1167,6 +1170,7 @@
break;
case FT2232H: /* FT2232H chip */
case FT4232H: /* FT4232H chip */
+ case FT232H: /* FT232H chip */
if ((baud <= 12000000) & (baud >= 1200)) {
div_value = ftdi_2232h_baud_to_divisor(baud);
} else if (baud < 1200) {
@@ -1428,9 +1432,12 @@
} else if (version < 0x600) {
/* Assume it's an FT232BM (or FT245BM) */
priv->chip_type = FT232BM;
- } else {
- /* Assume it's an FT232R */
+ } else if (version < 0x900) {
+ /* Assume it's an FT232RL */
priv->chip_type = FT232RL;
+ } else {
+ /* Assume it's an FT232H */
+ priv->chip_type = FT232H;
}
dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
}
@@ -1558,7 +1565,8 @@
priv->chip_type == FT2232C ||
priv->chip_type == FT232RL ||
priv->chip_type == FT2232H ||
- priv->chip_type == FT4232H)) {
+ priv->chip_type == FT4232H ||
+ priv->chip_type == FT232H)) {
retval = device_create_file(&port->dev,
&dev_attr_latency_timer);
}
@@ -1579,7 +1587,8 @@
priv->chip_type == FT2232C ||
priv->chip_type == FT232RL ||
priv->chip_type == FT2232H ||
- priv->chip_type == FT4232H) {
+ priv->chip_type == FT4232H ||
+ priv->chip_type == FT232H) {
device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
@@ -2211,6 +2220,7 @@
case FT232RL:
case FT2232H:
case FT4232H:
+ case FT232H:
len = 2;
break;
default:
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 213fe3d..19584fa 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -156,7 +156,8 @@
FT2232C = 4,
FT232RL = 5,
FT2232H = 6,
- FT4232H = 7
+ FT4232H = 7,
+ FT232H = 8
};
enum ftdi_sio_baudrate {
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 1d946cd..19156d1 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -22,6 +22,7 @@
#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
+#define FTDI_232H_PID 0x6014 /* Single channel hi-speed device */
#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
@@ -351,6 +352,7 @@
*/
#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
+#define FTDI_4N_GALAXY_DE_3_PID 0xF3C2
/*
* Linx Technologies product ids
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 318dd00..60b25d8 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -311,10 +311,6 @@
#define ZTE_PRODUCT_AC2726 0xfff5
#define ZTE_PRODUCT_AC8710T 0xffff
-/* ZTE PRODUCTS -- alternate vendor ID */
-#define ZTE_VENDOR_ID2 0x1d6b
-#define ZTE_PRODUCT_MF_330 0x0002
-
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
@@ -340,11 +336,12 @@
#define TOSHIBA_PRODUCT_G450 0x0d45
#define ALINK_VENDOR_ID 0x1e0e
+#define ALINK_PRODUCT_PH300 0x9100
#define ALINK_PRODUCT_3GU 0x9200
/* ALCATEL PRODUCTS */
#define ALCATEL_VENDOR_ID 0x1bbb
-#define ALCATEL_PRODUCT_X060S 0x0000
+#define ALCATEL_PRODUCT_X060S_X200 0x0000
#define PIRELLI_VENDOR_ID 0x1266
#define PIRELLI_PRODUCT_C100_1 0x1002
@@ -379,6 +376,9 @@
* It seems to contain a Qualcomm QSC6240/6290 chipset */
#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603
+/* Zoom */
+#define ZOOM_PRODUCT_4597 0x9607
+
/* Haier products */
#define HAIER_VENDOR_ID 0x201e
#define HAIER_PRODUCT_CE100 0x2009
@@ -432,6 +432,20 @@
.reason = OPTION_BLACKLIST_SENDSETUP
};
+static const u8 alcatel_x200_no_sendsetup[] = { 0, 1 };
+static const struct option_blacklist_info alcatel_x200_blacklist = {
+ .infolen = ARRAY_SIZE(alcatel_x200_no_sendsetup),
+ .ifaceinfo = alcatel_x200_no_sendsetup,
+ .reason = OPTION_BLACKLIST_SENDSETUP
+};
+
+static const u8 zte_k3765_z_no_sendsetup[] = { 0, 1, 2 };
+static const struct option_blacklist_info zte_k3765_z_blacklist = {
+ .infolen = ARRAY_SIZE(zte_k3765_z_no_sendsetup),
+ .ifaceinfo = zte_k3765_z_no_sendsetup,
+ .reason = OPTION_BLACKLIST_SENDSETUP
+};
+
static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -916,13 +930,13 @@
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
+ 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
- { USB_DEVICE(ZTE_VENDOR_ID2, ZTE_PRODUCT_MF_330) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
@@ -935,13 +949,17 @@
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
+ { USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) },
{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
- { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
+ .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
+ },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
.driver_info = (kernel_ulong_t)&four_g_w14_blacklist
},
+ { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
/* Pirelli */
{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1)},
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index c6d92a5..ea84456 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1745,6 +1745,7 @@
}
if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
+ release_firmware(fw_p);
return -ENOENT;
}
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 0041899..e8ae21b 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -819,6 +819,35 @@
}
}
+ /*
+ * Some devices don't work or return incorrect data the first
+ * time they get a READ(10) command, or for the first READ(10)
+ * after a media change. If the INITIAL_READ10 flag is set,
+ * keep track of whether READ(10) commands succeed. If the
+ * previous one succeeded and this one failed, set the REDO_READ10
+ * flag to force a retry.
+ */
+ if (unlikely((us->fflags & US_FL_INITIAL_READ10) &&
+ srb->cmnd[0] == READ_10)) {
+ if (srb->result == SAM_STAT_GOOD) {
+ set_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+ } else if (test_bit(US_FLIDX_READ10_WORKED, &us->dflags)) {
+ clear_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+ set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+ }
+
+ /*
+ * Next, if the REDO_READ10 flag is set, return a result
+ * code that will cause the SCSI core to retry the READ(10)
+ * command immediately.
+ */
+ if (test_bit(US_FLIDX_REDO_READ10, &us->dflags)) {
+ clear_bit(US_FLIDX_REDO_READ10, &us->dflags);
+ srb->result = DID_IMM_RETRY << 16;
+ srb->sense_buffer[0] = 0;
+ }
+ }
+
/* Did we transfer less than the minimum amount required? */
if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) &&
scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c1602b8..ccff348 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1114,6 +1114,16 @@
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Paul Hartman <paul.hartman+linux@gmail.com>
+ * This card reader returns "Illegal Request, Logical Block Address
+ * Out of Range" for the first READ(10) after a new card is inserted.
+ */
+UNUSUAL_DEV( 0x090c, 0x6000, 0x0100, 0x0100,
+ "Feiya",
+ "SD/SDHC Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_INITIAL_READ10 ),
+
/* This Pentax still camera is not conformant
* to the USB storage specification: -
* - It does not like the INQUIRY command. So we must handle this command
@@ -1888,6 +1898,15 @@
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_READ_DISC_INFO ),
+/* Reported by Sven Geggus <sven-usbst@geggus.net>
+ * This encrypted pen drive returns bogus data for the initial READ(10).
+ */
+UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200,
+ "Corsair",
+ "Padlock v2",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_INITIAL_READ10 ),
+
/* Patch by Richard Schütz <r.schtz@t-online.de>
* This external hard drive enclosure uses a JMicron chip which
* needs the US_FL_IGNORE_RESIDUE flag to work properly. */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 5ee7ac4..0ca0958 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -440,7 +440,8 @@
US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
- US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16);
+ US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
+ US_FL_INITIAL_READ10);
p = quirks;
while (*p) {
@@ -490,6 +491,9 @@
case 'm':
f |= US_FL_MAX_SECTORS_64;
break;
+ case 'n':
+ f |= US_FL_INITIAL_READ10;
+ break;
case 'o':
f |= US_FL_CAPACITY_OK;
break;
@@ -953,6 +957,13 @@
if (result)
goto BadDevice;
+ /*
+ * If the device returns invalid data for the first READ(10)
+ * command, indicate the command should be retried.
+ */
+ if (us->fflags & US_FL_INITIAL_READ10)
+ set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+
/* Acquire all the other resources and add the host */
result = usb_stor_acquire_resources(us);
if (result)
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 89d3bff..7b0f211 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -73,6 +73,8 @@
#define US_FLIDX_RESETTING 4 /* device reset in progress */
#define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */
#define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */
+#define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */
+#define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */
#define USB_STOR_STRING_LEN 32
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index 5fc983c..cf03ad0 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -447,6 +447,8 @@
goto out;
}
+ fb->fb.device = &fb->dev->dev;
+
fb->fb.fix.mmio_start = fb->dev->res.start;
fb->fb.fix.mmio_len = resource_size(&fb->dev->res);
diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
index 3ec4923..c22e8d3 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/arcfb.c
@@ -515,11 +515,10 @@
/* We need a flat backing store for the Arc's
less-flat actual paged framebuffer */
- if (!(videomemory = vmalloc(videomemorysize)))
+ videomemory = vzalloc(videomemorysize);
+ if (!videomemory)
return retval;
- memset(videomemory, 0, videomemorysize);
-
info = framebuffer_alloc(sizeof(struct arcfb_par), &dev->dev);
if (!info)
goto err;
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index ebb893c..d7aaec5 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -248,10 +248,6 @@
static int aty_init(struct fb_info *info);
-#ifdef CONFIG_ATARI
-static int store_video_par(char *videopar, unsigned char m64_num);
-#endif
-
static void aty_get_crtc(const struct atyfb_par *par, struct crtc *crtc);
static void aty_set_crtc(const struct atyfb_par *par, const struct crtc *crtc);
@@ -2268,11 +2264,13 @@
return;
}
+#ifdef CONFIG_PCI
static void aty_bl_exit(struct backlight_device *bd)
{
backlight_device_unregister(bd);
printk("aty: Backlight unloaded\n");
}
+#endif /* CONFIG_PCI */
#endif /* CONFIG_FB_ATY_BACKLIGHT */
@@ -2789,7 +2787,7 @@
return ret;
}
-#ifdef CONFIG_ATARI
+#if defined(CONFIG_ATARI) && !defined(MODULE)
static int __devinit store_video_par(char *video_str, unsigned char m64_num)
{
char *p;
@@ -2818,7 +2816,7 @@
phys_vmembase[m64_num] = 0;
return -1;
}
-#endif /* CONFIG_ATARI */
+#endif /* CONFIG_ATARI && !MODULE */
/*
* Blank the display.
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 0c9373b..2d93c8d 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -302,6 +302,18 @@
To compile this driver as a module, choose M here: the module will
be called adp8860_bl.
+config BACKLIGHT_ADP8870
+ tristate "Backlight Driver for ADP8870 using WLED"
+ depends on BACKLIGHT_CLASS_DEVICE && I2C
+ select NEW_LEDS
+ select LEDS_CLASS
+ help
+ If you have a LCD backlight connected to the ADP8870,
+ say Y here to enable this driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called adp8870_bl.
+
config BACKLIGHT_88PM860X
tristate "Backlight Driver for 88PM8606 using WLED"
depends on MFD_88PM860X
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index b9ca849..ee72adb 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -34,6 +34,7 @@
obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o
obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o
+obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c
new file mode 100644
index 0000000..05a8832
--- /dev/null
+++ b/drivers/video/backlight/adp8870_bl.c
@@ -0,0 +1,1012 @@
+/*
+ * Backlight driver for Analog Devices ADP8870 Backlight Devices
+ *
+ * Copyright 2009-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#include <linux/i2c/adp8870.h>
+#define ADP8870_EXT_FEATURES
+#define ADP8870_USE_LEDS
+
+
+#define ADP8870_MFDVID 0x00 /* Manufacturer and device ID */
+#define ADP8870_MDCR 0x01 /* Device mode and status */
+#define ADP8870_INT_STAT 0x02 /* Interrupts status */
+#define ADP8870_INT_EN 0x03 /* Interrupts enable */
+#define ADP8870_CFGR 0x04 /* Configuration register */
+#define ADP8870_BLSEL 0x05 /* Sink enable backlight or independent */
+#define ADP8870_PWMLED 0x06 /* PWM Enable Selection Register */
+#define ADP8870_BLOFF 0x07 /* Backlight off timeout */
+#define ADP8870_BLDIM 0x08 /* Backlight dim timeout */
+#define ADP8870_BLFR 0x09 /* Backlight fade in and out rates */
+#define ADP8870_BLMX1 0x0A /* Backlight (Brightness Level 1-daylight) maximum current */
+#define ADP8870_BLDM1 0x0B /* Backlight (Brightness Level 1-daylight) dim current */
+#define ADP8870_BLMX2 0x0C /* Backlight (Brightness Level 2-bright) maximum current */
+#define ADP8870_BLDM2 0x0D /* Backlight (Brightness Level 2-bright) dim current */
+#define ADP8870_BLMX3 0x0E /* Backlight (Brightness Level 3-office) maximum current */
+#define ADP8870_BLDM3 0x0F /* Backlight (Brightness Level 3-office) dim current */
+#define ADP8870_BLMX4 0x10 /* Backlight (Brightness Level 4-indoor) maximum current */
+#define ADP8870_BLDM4 0x11 /* Backlight (Brightness Level 4-indoor) dim current */
+#define ADP8870_BLMX5 0x12 /* Backlight (Brightness Level 5-dark) maximum current */
+#define ADP8870_BLDM5 0x13 /* Backlight (Brightness Level 5-dark) dim current */
+#define ADP8870_ISCLAW 0x1A /* Independent sink current fade law register */
+#define ADP8870_ISCC 0x1B /* Independent sink current control register */
+#define ADP8870_ISCT1 0x1C /* Independent Sink Current Timer Register LED[7:5] */
+#define ADP8870_ISCT2 0x1D /* Independent Sink Current Timer Register LED[4:1] */
+#define ADP8870_ISCF 0x1E /* Independent sink current fade register */
+#define ADP8870_ISC1 0x1F /* Independent Sink Current LED1 */
+#define ADP8870_ISC2 0x20 /* Independent Sink Current LED2 */
+#define ADP8870_ISC3 0x21 /* Independent Sink Current LED3 */
+#define ADP8870_ISC4 0x22 /* Independent Sink Current LED4 */
+#define ADP8870_ISC5 0x23 /* Independent Sink Current LED5 */
+#define ADP8870_ISC6 0x24 /* Independent Sink Current LED6 */
+#define ADP8870_ISC7 0x25 /* Independent Sink Current LED7 (Brightness Level 1-daylight) */
+#define ADP8870_ISC7_L2 0x26 /* Independent Sink Current LED7 (Brightness Level 2-bright) */
+#define ADP8870_ISC7_L3 0x27 /* Independent Sink Current LED7 (Brightness Level 3-office) */
+#define ADP8870_ISC7_L4 0x28 /* Independent Sink Current LED7 (Brightness Level 4-indoor) */
+#define ADP8870_ISC7_L5 0x29 /* Independent Sink Current LED7 (Brightness Level 5-dark) */
+#define ADP8870_CMP_CTL 0x2D /* ALS Comparator Control Register */
+#define ADP8870_ALS1_EN 0x2E /* Main ALS comparator level enable */
+#define ADP8870_ALS2_EN 0x2F /* Second ALS comparator level enable */
+#define ADP8870_ALS1_STAT 0x30 /* Main ALS Comparator Status Register */
+#define ADP8870_ALS2_STAT 0x31 /* Second ALS Comparator Status Register */
+#define ADP8870_L2TRP 0x32 /* L2 comparator reference */
+#define ADP8870_L2HYS 0x33 /* L2 hysteresis */
+#define ADP8870_L3TRP 0x34 /* L3 comparator reference */
+#define ADP8870_L3HYS 0x35 /* L3 hysteresis */
+#define ADP8870_L4TRP 0x36 /* L4 comparator reference */
+#define ADP8870_L4HYS 0x37 /* L4 hysteresis */
+#define ADP8870_L5TRP 0x38 /* L5 comparator reference */
+#define ADP8870_L5HYS 0x39 /* L5 hysteresis */
+#define ADP8870_PH1LEVL 0x40 /* First phototransistor ambient light level-low byte register */
+#define ADP8870_PH1LEVH 0x41 /* First phototransistor ambient light level-high byte register */
+#define ADP8870_PH2LEVL 0x42 /* Second phototransistor ambient light level-low byte register */
+#define ADP8870_PH2LEVH 0x43 /* Second phototransistor ambient light level-high byte register */
+
+#define ADP8870_MANUFID 0x3 /* Analog Devices AD8870 Manufacturer and device ID */
+#define ADP8870_DEVID(x) ((x) & 0xF)
+#define ADP8870_MANID(x) ((x) >> 4)
+
+/* MDCR Device mode and status */
+#define D7ALSEN (1 << 7)
+#define INT_CFG (1 << 6)
+#define NSTBY (1 << 5)
+#define DIM_EN (1 << 4)
+#define GDWN_DIS (1 << 3)
+#define SIS_EN (1 << 2)
+#define CMP_AUTOEN (1 << 1)
+#define BLEN (1 << 0)
+
+/* ADP8870_ALS1_EN Main ALS comparator level enable */
+#define L5_EN (1 << 3)
+#define L4_EN (1 << 2)
+#define L3_EN (1 << 1)
+#define L2_EN (1 << 0)
+
+#define CFGR_BLV_SHIFT 3
+#define CFGR_BLV_MASK 0x7
+#define ADP8870_FLAG_LED_MASK 0xFF
+
+#define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4))
+#define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1))
+#define ALS_CMPR_CFG_VAL(filt) ((0x7 & (filt)) << 1)
+
+struct adp8870_bl {
+ struct i2c_client *client;
+ struct backlight_device *bl;
+ struct adp8870_led *led;
+ struct adp8870_backlight_platform_data *pdata;
+ struct mutex lock;
+ unsigned long cached_daylight_max;
+ int id;
+ int revid;
+ int current_brightness;
+};
+
+struct adp8870_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ struct i2c_client *client;
+ enum led_brightness new_brightness;
+ int id;
+ int flags;
+};
+
+static int adp8870_read(struct i2c_client *client, int reg, uint8_t *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed reading at 0x%02x\n", reg);
+ return ret;
+ }
+
+ *val = ret;
+ return 0;
+}
+
+
+static int adp8870_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret = i2c_smbus_write_byte_data(client, reg, val);
+ if (ret)
+ dev_err(&client->dev, "failed to write\n");
+
+ return ret;
+}
+
+static int adp8870_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
+{
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ uint8_t reg_val;
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ ret = adp8870_read(client, reg, ®_val);
+
+ if (!ret && ((reg_val & bit_mask) == 0)) {
+ reg_val |= bit_mask;
+ ret = adp8870_write(client, reg, reg_val);
+ }
+
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+static int adp8870_clr_bits(struct i2c_client *client, int reg, uint8_t bit_mask)
+{
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ uint8_t reg_val;
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ ret = adp8870_read(client, reg, ®_val);
+
+ if (!ret && (reg_val & bit_mask)) {
+ reg_val &= ~bit_mask;
+ ret = adp8870_write(client, reg, reg_val);
+ }
+
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+/*
+ * Independent sink / LED
+ */
+#if defined(ADP8870_USE_LEDS)
+static void adp8870_led_work(struct work_struct *work)
+{
+ struct adp8870_led *led = container_of(work, struct adp8870_led, work);
+ adp8870_write(led->client, ADP8870_ISC1 + led->id - 1,
+ led->new_brightness >> 1);
+}
+
+static void adp8870_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct adp8870_led *led;
+
+ led = container_of(led_cdev, struct adp8870_led, cdev);
+ led->new_brightness = value;
+ /*
+ * Use workqueue for IO since I2C operations can sleep.
+ */
+ schedule_work(&led->work);
+}
+
+static int adp8870_led_setup(struct adp8870_led *led)
+{
+ struct i2c_client *client = led->client;
+ int ret = 0;
+
+ ret = adp8870_write(client, ADP8870_ISC1 + led->id - 1, 0);
+ if (ret)
+ return ret;
+
+ ret = adp8870_set_bits(client, ADP8870_ISCC, 1 << (led->id - 1));
+ if (ret)
+ return ret;
+
+ if (led->id > 4)
+ ret = adp8870_set_bits(client, ADP8870_ISCT1,
+ (led->flags & 0x3) << ((led->id - 5) * 2));
+ else
+ ret = adp8870_set_bits(client, ADP8870_ISCT2,
+ (led->flags & 0x3) << ((led->id - 1) * 2));
+
+ return ret;
+}
+
+static int __devinit adp8870_led_probe(struct i2c_client *client)
+{
+ struct adp8870_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ struct adp8870_led *led, *led_dat;
+ struct led_info *cur_led;
+ int ret, i;
+
+
+ led = kcalloc(pdata->num_leds, sizeof(*led), GFP_KERNEL);
+ if (led == NULL) {
+ dev_err(&client->dev, "failed to alloc memory\n");
+ return -ENOMEM;
+ }
+
+ ret = adp8870_write(client, ADP8870_ISCLAW, pdata->led_fade_law);
+ if (ret)
+ goto err_free;
+
+ ret = adp8870_write(client, ADP8870_ISCT1,
+ (pdata->led_on_time & 0x3) << 6);
+ if (ret)
+ goto err_free;
+
+ ret = adp8870_write(client, ADP8870_ISCF,
+ FADE_VAL(pdata->led_fade_in, pdata->led_fade_out));
+ if (ret)
+ goto err_free;
+
+ for (i = 0; i < pdata->num_leds; ++i) {
+ cur_led = &pdata->leds[i];
+ led_dat = &led[i];
+
+ led_dat->id = cur_led->flags & ADP8870_FLAG_LED_MASK;
+
+ if (led_dat->id > 7 || led_dat->id < 1) {
+ dev_err(&client->dev, "Invalid LED ID %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ if (pdata->bl_led_assign & (1 << (led_dat->id - 1))) {
+ dev_err(&client->dev, "LED %d used by Backlight\n",
+ led_dat->id);
+ goto err;
+ }
+
+ led_dat->cdev.name = cur_led->name;
+ led_dat->cdev.default_trigger = cur_led->default_trigger;
+ led_dat->cdev.brightness_set = adp8870_led_set;
+ led_dat->cdev.brightness = LED_OFF;
+ led_dat->flags = cur_led->flags >> FLAG_OFFT_SHIFT;
+ led_dat->client = client;
+ led_dat->new_brightness = LED_OFF;
+ INIT_WORK(&led_dat->work, adp8870_led_work);
+
+ ret = led_classdev_register(&client->dev, &led_dat->cdev);
+ if (ret) {
+ dev_err(&client->dev, "failed to register LED %d\n",
+ led_dat->id);
+ goto err;
+ }
+
+ ret = adp8870_led_setup(led_dat);
+ if (ret) {
+ dev_err(&client->dev, "failed to write\n");
+ i++;
+ goto err;
+ }
+ }
+
+ data->led = led;
+
+ return 0;
+
+ err:
+ for (i = i - 1; i >= 0; --i) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+
+ err_free:
+ kfree(led);
+
+ return ret;
+}
+
+static int __devexit adp8870_led_remove(struct i2c_client *client)
+{
+ struct adp8870_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+ int i;
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ led_classdev_unregister(&data->led[i].cdev);
+ cancel_work_sync(&data->led[i].work);
+ }
+
+ kfree(data->led);
+ return 0;
+}
+#else
+static int __devinit adp8870_led_probe(struct i2c_client *client)
+{
+ return 0;
+}
+
+static int __devexit adp8870_led_remove(struct i2c_client *client)
+{
+ return 0;
+}
+#endif
+
+static int adp8870_bl_set(struct backlight_device *bl, int brightness)
+{
+ struct adp8870_bl *data = bl_get_data(bl);
+ struct i2c_client *client = data->client;
+ int ret = 0;
+
+ if (data->pdata->en_ambl_sens) {
+ if ((brightness > 0) && (brightness < ADP8870_MAX_BRIGHTNESS)) {
+ /* Disable Ambient Light auto adjust */
+ ret = adp8870_clr_bits(client, ADP8870_MDCR,
+ CMP_AUTOEN);
+ if (ret)
+ return ret;
+ ret = adp8870_write(client, ADP8870_BLMX1, brightness);
+ if (ret)
+ return ret;
+ } else {
+ /*
+ * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust
+ * restore daylight l1 sysfs brightness
+ */
+ ret = adp8870_write(client, ADP8870_BLMX1,
+ data->cached_daylight_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_set_bits(client, ADP8870_MDCR,
+ CMP_AUTOEN);
+ if (ret)
+ return ret;
+ }
+ } else {
+ ret = adp8870_write(client, ADP8870_BLMX1, brightness);
+ if (ret)
+ return ret;
+ }
+
+ if (data->current_brightness && brightness == 0)
+ ret = adp8870_set_bits(client,
+ ADP8870_MDCR, DIM_EN);
+ else if (data->current_brightness == 0 && brightness)
+ ret = adp8870_clr_bits(client,
+ ADP8870_MDCR, DIM_EN);
+
+ if (!ret)
+ data->current_brightness = brightness;
+
+ return ret;
+}
+
+static int adp8870_bl_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ return adp8870_bl_set(bl, brightness);
+}
+
+static int adp8870_bl_get_brightness(struct backlight_device *bl)
+{
+ struct adp8870_bl *data = bl_get_data(bl);
+
+ return data->current_brightness;
+}
+
+static const struct backlight_ops adp8870_bl_ops = {
+ .update_status = adp8870_bl_update_status,
+ .get_brightness = adp8870_bl_get_brightness,
+};
+
+static int adp8870_bl_setup(struct backlight_device *bl)
+{
+ struct adp8870_bl *data = bl_get_data(bl);
+ struct i2c_client *client = data->client;
+ struct adp8870_backlight_platform_data *pdata = data->pdata;
+ int ret = 0;
+
+ ret = adp8870_write(client, ADP8870_BLSEL, ~pdata->bl_led_assign);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_PWMLED, pdata->pwm_assign);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX1, pdata->l1_daylight_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLDM1, pdata->l1_daylight_dim);
+ if (ret)
+ return ret;
+
+ if (pdata->en_ambl_sens) {
+ data->cached_daylight_max = pdata->l1_daylight_max;
+ ret = adp8870_write(client, ADP8870_BLMX2,
+ pdata->l2_bright_max);
+ if (ret)
+ return ret;
+ ret = adp8870_write(client, ADP8870_BLDM2,
+ pdata->l2_bright_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX3,
+ pdata->l3_office_max);
+ if (ret)
+ return ret;
+ ret = adp8870_write(client, ADP8870_BLDM3,
+ pdata->l3_office_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX4,
+ pdata->l4_indoor_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLDM4,
+ pdata->l4_indor_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLMX5,
+ pdata->l5_dark_max);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLDM5,
+ pdata->l5_dark_dim);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L2TRP, pdata->l2_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L2HYS, pdata->l2_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L3TRP, pdata->l3_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L3HYS, pdata->l3_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L4TRP, pdata->l4_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L4HYS, pdata->l4_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L5TRP, pdata->l5_trip);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_L5HYS, pdata->l5_hyst);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_ALS1_EN, L5_EN | L4_EN |
+ L3_EN | L2_EN);
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_CMP_CTL,
+ ALS_CMPR_CFG_VAL(pdata->abml_filt));
+ if (ret)
+ return ret;
+ }
+
+ ret = adp8870_write(client, ADP8870_CFGR,
+ BL_CFGR_VAL(pdata->bl_fade_law, 0));
+ if (ret)
+ return ret;
+
+ ret = adp8870_write(client, ADP8870_BLFR, FADE_VAL(pdata->bl_fade_in,
+ pdata->bl_fade_out));
+ if (ret)
+ return ret;
+ /*
+ * ADP8870 Rev0 requires GDWN_DIS bit set
+ */
+
+ ret = adp8870_set_bits(client, ADP8870_MDCR, BLEN | DIM_EN | NSTBY |
+ (data->revid == 0 ? GDWN_DIS : 0));
+
+ return ret;
+}
+
+static ssize_t adp8870_show(struct device *dev, char *buf, int reg)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp8870_read(data->client, reg, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ return sprintf(buf, "%u\n", reg_val);
+}
+
+static ssize_t adp8870_store(struct device *dev, const char *buf,
+ size_t count, int reg)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&data->lock);
+ adp8870_write(data->client, reg, val);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t adp8870_bl_l5_dark_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX5);
+}
+
+static ssize_t adp8870_bl_l5_dark_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX5);
+}
+static DEVICE_ATTR(l5_dark_max, 0664, adp8870_bl_l5_dark_max_show,
+ adp8870_bl_l5_dark_max_store);
+
+
+static ssize_t adp8870_bl_l4_indoor_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX4);
+}
+
+static ssize_t adp8870_bl_l4_indoor_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX4);
+}
+static DEVICE_ATTR(l4_indoor_max, 0664, adp8870_bl_l4_indoor_max_show,
+ adp8870_bl_l4_indoor_max_store);
+
+
+static ssize_t adp8870_bl_l3_office_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX3);
+}
+
+static ssize_t adp8870_bl_l3_office_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX3);
+}
+
+static DEVICE_ATTR(l3_office_max, 0664, adp8870_bl_l3_office_max_show,
+ adp8870_bl_l3_office_max_store);
+
+static ssize_t adp8870_bl_l2_bright_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX2);
+}
+
+static ssize_t adp8870_bl_l2_bright_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLMX2);
+}
+static DEVICE_ATTR(l2_bright_max, 0664, adp8870_bl_l2_bright_max_show,
+ adp8870_bl_l2_bright_max_store);
+
+static ssize_t adp8870_bl_l1_daylight_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLMX1);
+}
+
+static ssize_t adp8870_bl_l1_daylight_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int ret = strict_strtoul(buf, 10, &data->cached_daylight_max);
+ if (ret)
+ return ret;
+
+ return adp8870_store(dev, buf, count, ADP8870_BLMX1);
+}
+static DEVICE_ATTR(l1_daylight_max, 0664, adp8870_bl_l1_daylight_max_show,
+ adp8870_bl_l1_daylight_max_store);
+
+static ssize_t adp8870_bl_l5_dark_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM5);
+}
+
+static ssize_t adp8870_bl_l5_dark_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM5);
+}
+static DEVICE_ATTR(l5_dark_dim, 0664, adp8870_bl_l5_dark_dim_show,
+ adp8870_bl_l5_dark_dim_store);
+
+static ssize_t adp8870_bl_l4_indoor_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM4);
+}
+
+static ssize_t adp8870_bl_l4_indoor_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM4);
+}
+static DEVICE_ATTR(l4_indoor_dim, 0664, adp8870_bl_l4_indoor_dim_show,
+ adp8870_bl_l4_indoor_dim_store);
+
+
+static ssize_t adp8870_bl_l3_office_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM3);
+}
+
+static ssize_t adp8870_bl_l3_office_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM3);
+}
+static DEVICE_ATTR(l3_office_dim, 0664, adp8870_bl_l3_office_dim_show,
+ adp8870_bl_l3_office_dim_store);
+
+static ssize_t adp8870_bl_l2_bright_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM2);
+}
+
+static ssize_t adp8870_bl_l2_bright_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM2);
+}
+static DEVICE_ATTR(l2_bright_dim, 0664, adp8870_bl_l2_bright_dim_show,
+ adp8870_bl_l2_bright_dim_store);
+
+static ssize_t adp8870_bl_l1_daylight_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp8870_show(dev, buf, ADP8870_BLDM1);
+}
+
+static ssize_t adp8870_bl_l1_daylight_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp8870_store(dev, buf, count, ADP8870_BLDM1);
+}
+static DEVICE_ATTR(l1_daylight_dim, 0664, adp8870_bl_l1_daylight_dim_show,
+ adp8870_bl_l1_daylight_dim_store);
+
+#ifdef ADP8870_EXT_FEATURES
+static ssize_t adp8870_bl_ambient_light_level_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+ uint16_t ret_val;
+
+ mutex_lock(&data->lock);
+ error = adp8870_read(data->client, ADP8870_PH1LEVL, ®_val);
+ if (error < 0) {
+ mutex_unlock(&data->lock);
+ return error;
+ }
+ ret_val = reg_val;
+ error = adp8870_read(data->client, ADP8870_PH1LEVH, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ /* Return 13-bit conversion value for the first light sensor */
+ ret_val += (reg_val & 0x1F) << 8;
+
+ return sprintf(buf, "%u\n", ret_val);
+}
+static DEVICE_ATTR(ambient_light_level, 0444,
+ adp8870_bl_ambient_light_level_show, NULL);
+
+static ssize_t adp8870_bl_ambient_light_zone_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp8870_read(data->client, ADP8870_CFGR, ®_val);
+ mutex_unlock(&data->lock);
+
+ if (error < 0)
+ return error;
+
+ return sprintf(buf, "%u\n",
+ ((reg_val >> CFGR_BLV_SHIFT) & CFGR_BLV_MASK) + 1);
+}
+
+static ssize_t adp8870_bl_ambient_light_zone_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct adp8870_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ uint8_t reg_val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ if (val == 0) {
+ /* Enable automatic ambient light sensing */
+ adp8870_set_bits(data->client, ADP8870_MDCR, CMP_AUTOEN);
+ } else if ((val > 0) && (val < 6)) {
+ /* Disable automatic ambient light sensing */
+ adp8870_clr_bits(data->client, ADP8870_MDCR, CMP_AUTOEN);
+
+ /* Set user supplied ambient light zone */
+ mutex_lock(&data->lock);
+ adp8870_read(data->client, ADP8870_CFGR, ®_val);
+ reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT);
+ reg_val |= (val - 1) << CFGR_BLV_SHIFT;
+ adp8870_write(data->client, ADP8870_CFGR, reg_val);
+ mutex_unlock(&data->lock);
+ }
+
+ return count;
+}
+static DEVICE_ATTR(ambient_light_zone, 0664,
+ adp8870_bl_ambient_light_zone_show,
+ adp8870_bl_ambient_light_zone_store);
+#endif
+
+static struct attribute *adp8870_bl_attributes[] = {
+ &dev_attr_l5_dark_max.attr,
+ &dev_attr_l5_dark_dim.attr,
+ &dev_attr_l4_indoor_max.attr,
+ &dev_attr_l4_indoor_dim.attr,
+ &dev_attr_l3_office_max.attr,
+ &dev_attr_l3_office_dim.attr,
+ &dev_attr_l2_bright_max.attr,
+ &dev_attr_l2_bright_dim.attr,
+ &dev_attr_l1_daylight_max.attr,
+ &dev_attr_l1_daylight_dim.attr,
+#ifdef ADP8870_EXT_FEATURES
+ &dev_attr_ambient_light_level.attr,
+ &dev_attr_ambient_light_zone.attr,
+#endif
+ NULL
+};
+
+static const struct attribute_group adp8870_bl_attr_group = {
+ .attrs = adp8870_bl_attributes,
+};
+
+static int __devinit adp8870_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct backlight_properties props;
+ struct backlight_device *bl;
+ struct adp8870_bl *data;
+ struct adp8870_backlight_platform_data *pdata =
+ client->dev.platform_data;
+ uint8_t reg_val;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data?\n");
+ return -EINVAL;
+ }
+
+ ret = adp8870_read(client, ADP8870_MFDVID, ®_val);
+ if (ret < 0)
+ return -EIO;
+
+ if (ADP8870_MANID(reg_val) != ADP8870_MANUFID) {
+ dev_err(&client->dev, "failed to probe\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ data->revid = ADP8870_DEVID(reg_val);
+ data->client = client;
+ data->pdata = pdata;
+ data->id = id->driver_data;
+ data->current_brightness = 0;
+ i2c_set_clientdata(client, data);
+
+ mutex_init(&data->lock);
+
+ memset(&props, 0, sizeof(props));
+ props.type = BACKLIGHT_RAW;
+ props.max_brightness = props.brightness = ADP8870_MAX_BRIGHTNESS;
+ bl = backlight_device_register(dev_driver_string(&client->dev),
+ &client->dev, data, &adp8870_bl_ops, &props);
+ if (IS_ERR(bl)) {
+ dev_err(&client->dev, "failed to register backlight\n");
+ ret = PTR_ERR(bl);
+ goto out2;
+ }
+
+ data->bl = bl;
+
+ if (pdata->en_ambl_sens)
+ ret = sysfs_create_group(&bl->dev.kobj,
+ &adp8870_bl_attr_group);
+
+ if (ret) {
+ dev_err(&client->dev, "failed to register sysfs\n");
+ goto out1;
+ }
+
+ ret = adp8870_bl_setup(bl);
+ if (ret) {
+ ret = -EIO;
+ goto out;
+ }
+
+ backlight_update_status(bl);
+
+ dev_info(&client->dev, "Rev.%d Backlight\n", data->revid);
+
+ if (pdata->num_leds)
+ adp8870_led_probe(client);
+
+ return 0;
+
+out:
+ if (data->pdata->en_ambl_sens)
+ sysfs_remove_group(&data->bl->dev.kobj,
+ &adp8870_bl_attr_group);
+out1:
+ backlight_device_unregister(bl);
+out2:
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+
+ return ret;
+}
+
+static int __devexit adp8870_remove(struct i2c_client *client)
+{
+ struct adp8870_bl *data = i2c_get_clientdata(client);
+
+ adp8870_clr_bits(client, ADP8870_MDCR, NSTBY);
+
+ if (data->led)
+ adp8870_led_remove(client);
+
+ if (data->pdata->en_ambl_sens)
+ sysfs_remove_group(&data->bl->dev.kobj,
+ &adp8870_bl_attr_group);
+
+ backlight_device_unregister(data->bl);
+ i2c_set_clientdata(client, NULL);
+ kfree(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp8870_i2c_suspend(struct i2c_client *client, pm_message_t message)
+{
+ adp8870_clr_bits(client, ADP8870_MDCR, NSTBY);
+
+ return 0;
+}
+
+static int adp8870_i2c_resume(struct i2c_client *client)
+{
+ adp8870_set_bits(client, ADP8870_MDCR, NSTBY);
+
+ return 0;
+}
+#else
+#define adp8870_i2c_suspend NULL
+#define adp8870_i2c_resume NULL
+#endif
+
+static const struct i2c_device_id adp8870_id[] = {
+ { "adp8870", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adp8870_id);
+
+static struct i2c_driver adp8870_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ },
+ .probe = adp8870_probe,
+ .remove = __devexit_p(adp8870_remove),
+ .suspend = adp8870_i2c_suspend,
+ .resume = adp8870_i2c_resume,
+ .id_table = adp8870_id,
+};
+
+static int __init adp8870_init(void)
+{
+ return i2c_add_driver(&adp8870_driver);
+}
+module_init(adp8870_init);
+
+static void __exit adp8870_exit(void)
+{
+ i2c_del_driver(&adp8870_driver);
+}
+module_exit(adp8870_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP8870 Backlight driver");
+MODULE_ALIAS("platform:adp8870-backlight");
diff --git a/drivers/video/bf537-lq035.c b/drivers/video/bf537-lq035.c
index 47c21fb..bea53c1 100644
--- a/drivers/video/bf537-lq035.c
+++ b/drivers/video/bf537-lq035.c
@@ -789,6 +789,7 @@
i2c_add_driver(&ad5280_driver);
memset(&props, 0, sizeof(props));
+ props.type = BACKLIGHT_RAW;
props.max_brightness = MAX_BRIGHENESS;
bl_dev = backlight_device_register("bf537-bl", NULL, NULL,
&bfin_lq035fb_bl_ops, &props);
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c
index ebda687..377dde3 100644
--- a/drivers/video/broadsheetfb.c
+++ b/drivers/video/broadsheetfb.c
@@ -1101,12 +1101,10 @@
videomemorysize = roundup((dpyw*dpyh), PAGE_SIZE);
- videomemory = vmalloc(videomemorysize);
+ videomemory = vzalloc(videomemorysize);
if (!videomemory)
goto err_fb_rel;
- memset(videomemory, 0, videomemorysize);
-
info->screen_base = (char *)videomemory;
info->fbops = &broadsheetfb_ops;
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index fb20584..784139a 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -16,6 +16,8 @@
#include <linux/pci.h>
#include <video/vga.h>
+static bool request_mem_succeeded = false;
+
static struct fb_var_screeninfo efifb_defined __devinitdata = {
.activate = FB_ACTIVATE_NOW,
.height = -1,
@@ -281,7 +283,9 @@
{
if (info->screen_base)
iounmap(info->screen_base);
- release_mem_region(info->apertures->ranges[0].base, info->apertures->ranges[0].size);
+ if (request_mem_succeeded)
+ release_mem_region(info->apertures->ranges[0].base,
+ info->apertures->ranges[0].size);
framebuffer_release(info);
}
@@ -326,14 +330,13 @@
return 0;
}
-static int __devinit efifb_probe(struct platform_device *dev)
+static int __init efifb_probe(struct platform_device *dev)
{
struct fb_info *info;
int err;
unsigned int size_vmode;
unsigned int size_remap;
unsigned int size_total;
- int request_succeeded = 0;
if (!screen_info.lfb_depth)
screen_info.lfb_depth = 32;
@@ -387,7 +390,7 @@
efifb_fix.smem_len = size_remap;
if (request_mem_region(efifb_fix.smem_start, size_remap, "efifb")) {
- request_succeeded = 1;
+ request_mem_succeeded = true;
} else {
/* We cannot make this fatal. Sometimes this comes from magic
spaces our resource handlers simply don't know about */
@@ -413,7 +416,7 @@
info->apertures->ranges[0].base = efifb_fix.smem_start;
info->apertures->ranges[0].size = size_remap;
- info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len);
+ info->screen_base = ioremap_wc(efifb_fix.smem_start, efifb_fix.smem_len);
if (!info->screen_base) {
printk(KERN_ERR "efifb: abort, cannot ioremap video memory "
"0x%x @ 0x%lx\n",
@@ -491,13 +494,12 @@
err_release_fb:
framebuffer_release(info);
err_release_mem:
- if (request_succeeded)
+ if (request_mem_succeeded)
release_mem_region(efifb_fix.smem_start, size_total);
return err;
}
static struct platform_driver efifb_driver = {
- .probe = efifb_probe,
.driver = {
.name = "efifb",
},
@@ -528,13 +530,21 @@
if (!screen_info.lfb_linelength)
return -ENODEV;
- ret = platform_driver_register(&efifb_driver);
+ ret = platform_device_register(&efifb_device);
+ if (ret)
+ return ret;
- if (!ret) {
- ret = platform_device_register(&efifb_device);
- if (ret)
- platform_driver_unregister(&efifb_driver);
+ /*
+ * This is not just an optimization. We will interfere
+ * with a real driver if we get reprobed, so don't allow
+ * it.
+ */
+ ret = platform_driver_probe(&efifb_driver, efifb_probe);
+ if (ret) {
+ platform_device_unregister(&efifb_device);
+ return ret;
}
+
return ret;
}
module_init(efifb_init);
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index bedf5be..0acc7d6 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -555,8 +555,6 @@
static int fsl_diu_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- unsigned long htotal, vtotal;
-
pr_debug("check_var xres: %d\n", var->xres);
pr_debug("check_var yres: %d\n", var->yres);
@@ -635,20 +633,6 @@
break;
}
- /* If the pixclock is below the minimum spec'd value then set to
- * refresh rate for 60Hz since this is supported by most monitors.
- * Refer to Documentation/fb/ for calculations.
- */
- if ((var->pixclock < MIN_PIX_CLK) || (var->pixclock > MAX_PIX_CLK)) {
- htotal = var->xres + var->right_margin + var->hsync_len +
- var->left_margin;
- vtotal = var->yres + var->lower_margin + var->vsync_len +
- var->upper_margin;
- var->pixclock = (vtotal * htotal * 6UL) / 100UL;
- var->pixclock = KHZ2PICOS(var->pixclock);
- pr_debug("pixclock set for 60Hz refresh = %u ps\n",
- var->pixclock);
- }
var->height = -1;
var->width = -1;
diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/geode/gx1fb_core.c
index c6b554f..5a5d092 100644
--- a/drivers/video/geode/gx1fb_core.c
+++ b/drivers/video/geode/gx1fb_core.c
@@ -29,7 +29,7 @@
static char panel_option[32] = "";
/* Modes relevant to the GX1 (taken from modedb.c) */
-static const struct fb_videomode __initdata gx1_modedb[] = {
+static const struct fb_videomode __devinitdata gx1_modedb[] = {
/* 640x480-60 VESA */
{ NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2,
0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
@@ -195,7 +195,7 @@
return par->vid_ops->blank_display(info, blank_mode);
}
-static int __init gx1fb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
+static int __devinit gx1fb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
{
struct geodefb_par *par = info->par;
unsigned gx_base;
@@ -268,7 +268,7 @@
.fb_imageblit = cfb_imageblit,
};
-static struct fb_info * __init gx1fb_init_fbinfo(struct device *dev)
+static struct fb_info * __devinit gx1fb_init_fbinfo(struct device *dev)
{
struct geodefb_par *par;
struct fb_info *info;
@@ -318,7 +318,7 @@
return info;
}
-static int __init gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static int __devinit gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct geodefb_par *par;
struct fb_info *info;
@@ -382,7 +382,7 @@
return ret;
}
-static void gx1fb_remove(struct pci_dev *pdev)
+static void __devexit gx1fb_remove(struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct geodefb_par *par = info->par;
@@ -441,7 +441,7 @@
.name = "gx1fb",
.id_table = gx1fb_id_table,
.probe = gx1fb_probe,
- .remove = gx1fb_remove,
+ .remove = __devexit_p(gx1fb_remove),
};
static int __init gx1fb_init(void)
@@ -456,7 +456,7 @@
return pci_register_driver(&gx1fb_driver);
}
-static void __exit gx1fb_cleanup(void)
+static void __devexit gx1fb_cleanup(void)
{
pci_unregister_driver(&gx1fb_driver);
}
diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c
index 1b94643..614251a 100644
--- a/drivers/video/hecubafb.c
+++ b/drivers/video/hecubafb.c
@@ -231,10 +231,9 @@
videomemorysize = (DPY_W*DPY_H)/8;
- if (!(videomemory = vmalloc(videomemorysize)))
- return retval;
-
- memset(videomemory, 0, videomemorysize);
+ videomemory = vzalloc(videomemorysize);
+ if (!videomemory)
+ goto err_videomem_alloc;
info = framebuffer_alloc(sizeof(struct hecubafb_par), &dev->dev);
if (!info)
@@ -276,6 +275,7 @@
framebuffer_release(info);
err_fballoc:
vfree(videomemory);
+err_videomem_alloc:
module_put(board->owner);
return retval;
}
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index d2ccfd6..f135dbe 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -856,10 +856,10 @@
dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu,
fbi->map_dma);
failed_map:
- clk_put(fbi->clk);
-failed_getclock:
iounmap(fbi->regs);
failed_ioremap:
+ clk_put(fbi->clk);
+failed_getclock:
release_mem_region(res->start, resource_size(res));
failed_req:
kfree(info->pseudo_palette);
diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
index ed64edf..97d45e5 100644
--- a/drivers/video/metronomefb.c
+++ b/drivers/video/metronomefb.c
@@ -628,12 +628,10 @@
/* we need to add a spare page because our csum caching scheme walks
* to the end of the page */
videomemorysize = PAGE_SIZE + (fw * fh);
- videomemory = vmalloc(videomemorysize);
+ videomemory = vzalloc(videomemorysize);
if (!videomemory)
goto err_fb_rel;
- memset(videomemory, 0, videomemorysize);
-
info->screen_base = (char __force __iomem *)videomemory;
info->fbops = &metronomefb_ops;
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 48c3ea8..cb175fe 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -1128,3 +1128,4 @@
EXPORT_SYMBOL(fb_find_nearest_mode);
EXPORT_SYMBOL(fb_videomode_to_modelist);
EXPORT_SYMBOL(fb_find_mode);
+EXPORT_SYMBOL(fb_find_mode_cvt);
diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
index 35f61dd..bb95ec5 100644
--- a/drivers/video/pxa168fb.c
+++ b/drivers/video/pxa168fb.c
@@ -623,19 +623,21 @@
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "no IO memory defined\n");
- return -ENOENT;
+ ret = -ENOENT;
+ goto failed_put_clk;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no IRQ defined\n");
- return -ENOENT;
+ ret = -ENOENT;
+ goto failed_put_clk;
}
info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev);
if (info == NULL) {
- clk_put(clk);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto failed_put_clk;
}
/* Initialize private data */
@@ -671,7 +673,7 @@
fbi->reg_base = ioremap_nocache(res->start, resource_size(res));
if (fbi->reg_base == NULL) {
ret = -ENOMEM;
- goto failed;
+ goto failed_free_info;
}
/*
@@ -683,7 +685,7 @@
&fbi->fb_start_dma, GFP_KERNEL);
if (info->screen_base == NULL) {
ret = -ENOMEM;
- goto failed;
+ goto failed_free_info;
}
info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
@@ -772,8 +774,9 @@
failed_free_fbmem:
dma_free_coherent(fbi->dev, info->fix.smem_len,
info->screen_base, fbi->fb_start_dma);
-failed:
+failed_free_info:
kfree(info);
+failed_put_clk:
clk_put(clk);
dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret);
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 0352afa..4aecf21 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -235,13 +235,12 @@
struct fb_info *info)
{
struct s3c_fb_win *win = info->par;
- struct s3c_fb_pd_win *windata = win->windata;
struct s3c_fb *sfb = win->parent;
dev_dbg(sfb->dev, "checking parameters\n");
- var->xres_virtual = max((unsigned int)windata->virtual_x, var->xres);
- var->yres_virtual = max((unsigned int)windata->virtual_y, var->yres);
+ var->xres_virtual = max(var->xres_virtual, var->xres);
+ var->yres_virtual = max(var->yres_virtual, var->yres);
if (!s3c_fb_validate_win_bpp(win, var->bits_per_pixel)) {
dev_dbg(sfb->dev, "win %d: unsupported bpp %d\n",
@@ -558,6 +557,13 @@
vidosd_set_alpha(win, alpha);
vidosd_set_size(win, data);
+ /* Enable DMA channel for this window */
+ if (sfb->variant.has_shadowcon) {
+ data = readl(sfb->regs + SHADOWCON);
+ data |= SHADOWCON_CHx_ENABLE(win_no);
+ writel(data, sfb->regs + SHADOWCON);
+ }
+
data = WINCONx_ENWIN;
/* note, since we have to round up the bits-per-pixel, we end up
@@ -637,13 +643,6 @@
writel(data, regs + sfb->variant.wincon + (win_no * 4));
writel(0x0, regs + sfb->variant.winmap + (win_no * 4));
- /* Enable DMA channel for this window */
- if (sfb->variant.has_shadowcon) {
- data = readl(sfb->regs + SHADOWCON);
- data |= SHADOWCON_CHx_ENABLE(win_no);
- writel(data, sfb->regs + SHADOWCON);
- }
-
shadow_protect_win(win, 0);
return 0;
@@ -1487,11 +1486,10 @@
release_mem_region(sfb->regs_res->start, resource_size(sfb->regs_res));
- kfree(sfb);
-
pm_runtime_put_sync(sfb->dev);
pm_runtime_disable(sfb->dev);
+ kfree(sfb);
return 0;
}
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index 3b7f2f5..4de541c 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -2237,6 +2237,22 @@
&info->modelist);
#endif
info->var = savagefb_var800x600x8;
+ /* if a panel was detected, default to a CVT mode instead */
+ if (par->SavagePanelWidth) {
+ struct fb_videomode cvt_mode;
+
+ memset(&cvt_mode, 0, sizeof(cvt_mode));
+ cvt_mode.xres = par->SavagePanelWidth;
+ cvt_mode.yres = par->SavagePanelHeight;
+ cvt_mode.refresh = 60;
+ /* FIXME: if we know there is only the panel
+ * we can enable reduced blanking as well */
+ if (fb_find_mode_cvt(&cvt_mode, 0, 0))
+ printk(KERN_WARNING "No CVT mode found for panel\n");
+ else if (fb_find_mode(&info->var, info, NULL, NULL, 0,
+ &cvt_mode, 0) != 3)
+ info->var = savagefb_var800x600x8;
+ }
if (mode_option) {
fb_find_mode(&info->var, info, mode_option,
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 6ae40b6..7d54e2c 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -1127,23 +1127,16 @@
struct fb_info *info = hdmi->info;
unsigned long parent_rate = 0, hdmi_rate;
- /* A device has been plugged in */
- pm_runtime_get_sync(hdmi->dev);
-
ret = sh_hdmi_read_edid(hdmi, &hdmi_rate, &parent_rate);
- if (ret < 0) {
- pm_runtime_put(hdmi->dev);
+ if (ret < 0)
goto out;
- }
hdmi->hp_state = HDMI_HOTPLUG_EDID_DONE;
/* Reconfigure the clock */
ret = sh_hdmi_clk_configure(hdmi, hdmi_rate, parent_rate);
- if (ret < 0) {
- pm_runtime_put(hdmi->dev);
+ if (ret < 0)
goto out;
- }
msleep(10);
sh_hdmi_configure(hdmi);
@@ -1191,7 +1184,6 @@
fb_set_suspend(hdmi->info, 1);
console_unlock();
- pm_runtime_put(hdmi->dev);
}
out:
@@ -1312,7 +1304,7 @@
INIT_DELAYED_WORK(&hdmi->edid_work, sh_hdmi_edid_work_fn);
pm_runtime_enable(&pdev->dev);
- pm_runtime_resume(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
/* Product and revision IDs are 0 in sh-mobile version */
dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n",
@@ -1340,7 +1332,7 @@
ecodec:
free_irq(irq, hdmi);
ereqirq:
- pm_runtime_suspend(&pdev->dev);
+ pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
iounmap(hdmi->base);
emap:
@@ -1377,7 +1369,7 @@
free_irq(irq, hdmi);
/* Wait for already scheduled work */
cancel_delayed_work_sync(&hdmi->edid_work);
- pm_runtime_suspend(&pdev->dev);
+ pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
clk_disable(hdmi->hdmi_clk);
clk_put(hdmi->hdmi_clk);
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 404c03b..019dbd3 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -470,7 +470,7 @@
unsigned long tmp;
int bpp = 0;
unsigned long ldddsr;
- int k, m;
+ int k, m, ret;
/* enable clocks before accessing the hardware */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
@@ -540,7 +540,7 @@
board_cfg = &ch->cfg.board_cfg;
if (board_cfg->setup_sys) {
- int ret = board_cfg->setup_sys(board_cfg->board_data,
+ ret = board_cfg->setup_sys(board_cfg->board_data,
ch, &sh_mobile_lcdc_sys_bus_ops);
if (ret)
return ret;
diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c
index 9170c82..cc7d732 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/sh_mobile_meram.c
@@ -218,7 +218,7 @@
icb_offset = 0xc0000000 | (cfg->current_reg << 23);
*icb_addr_y = icb_offset | (cfg->icb[0].marker_icb << 24);
- if ((*icb_addr_c) && is_nvcolor(cfg->pixelformat))
+ if (is_nvcolor(cfg->pixelformat))
*icb_addr_c = icb_offset | (cfg->icb[1].marker_icb << 24);
}
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 87f0be1..6294dca 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -1664,7 +1664,7 @@
resource_size(info->regs_res));
}
-static int sm501fb_init_fb(struct fb_info *fb,
+static int __devinit sm501fb_init_fb(struct fb_info *fb,
enum sm501_controller head,
const char *fbname)
{
diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 52b0f3e..816a4fd 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -1233,8 +1233,12 @@
if (dlfb_is_valid_mode(&info->monspecs.modedb[i], info))
fb_add_videomode(&info->monspecs.modedb[i],
&info->modelist);
- else /* if we've removed top/best mode */
- info->monspecs.misc &= ~FB_MISC_1ST_DETAIL;
+ else {
+ if (i == 0)
+ /* if we've removed top/best mode */
+ info->monspecs.misc
+ &= ~FB_MISC_1ST_DETAIL;
+ }
}
default_vmode = fb_find_best_display(&info->monspecs,
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index a99bbe8..501b340 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -175,6 +175,7 @@
static void vesafb_destroy(struct fb_info *info)
{
+ fb_dealloc_cmap(&info->cmap);
if (info->screen_base)
iounmap(info->screen_base);
release_mem_region(info->apertures->ranges[0].base, info->apertures->ranges[0].size);
diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
index 53b2c5a..305c975 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -1265,9 +1265,11 @@
static void vga16fb_destroy(struct fb_info *info)
{
+ struct platform_device *dev = container_of(info->device, struct platform_device, dev);
iounmap(info->screen_base);
fb_dealloc_cmap(&info->cmap);
/* XXX unshare VGA regions */
+ platform_set_drvdata(dev, NULL);
framebuffer_release(info);
}
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index a20218c..beac52fc 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -395,10 +395,9 @@
spin_lock_init(&info->dirty_lock);
spin_lock_init(&info->resize_lock);
- info->fb = vmalloc(fb_size);
+ info->fb = vzalloc(fb_size);
if (info->fb == NULL)
goto error_nomem;
- memset(info->fb, 0, fb_size);
info->nr_pages = (fb_size + PAGE_SIZE - 1) >> PAGE_SHIFT;
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 00d615d..979d6ee 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -42,7 +42,7 @@
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1
+ depends on W1 && GENERIC_HARDIRQS
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c
index ad57593..a0c8965 100644
--- a/drivers/w1/masters/ds1wm.c
+++ b/drivers/w1/masters/ds1wm.c
@@ -109,6 +109,7 @@
/* byte to write that makes all intr disabled, */
/* considering active_state (IAS) (optimization) */
u8 int_en_reg_none;
+ unsigned int reset_recover_delay; /* see ds1wm.h */
};
static inline void ds1wm_write_register(struct ds1wm_data *ds1wm_data, u32 reg,
@@ -187,6 +188,9 @@
return 1;
}
+ if (ds1wm_data->reset_recover_delay)
+ msleep(ds1wm_data->reset_recover_delay);
+
return 0;
}
@@ -490,6 +494,7 @@
}
ds1wm_data->irq = res->start;
ds1wm_data->int_en_reg_none = (plat->active_high ? DS1WM_INTEN_IAS : 0);
+ ds1wm_data->reset_recover_delay = plat->reset_recover_delay;
if (res->flags & IORESOURCE_IRQ_HIGHEDGE)
irq_set_irq_type(ds1wm_data->irq, IRQ_TYPE_EDGE_RISING);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 022f9eb..21d816e 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -535,8 +535,7 @@
config INTEL_SCU_WATCHDOG
bool "Intel SCU Watchdog for Mobile Platforms"
- depends on WATCHDOG
- depends on INTEL_SCU_IPC
+ depends on X86_MRST
---help---
Hardware driver for the watchdog time built into the Intel SCU
for Intel Mobile Platforms.
@@ -600,8 +599,7 @@
config HP_WATCHDOG
tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
- depends on X86
- default m
+ depends on X86 && PCI
help
A software monitoring watchdog and NMI sourcing driver. This driver
will detect lockups and provide a stack trace. This is a driver that
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index 750bc52..4ca5d40 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -448,7 +448,7 @@
}
module_exit(at32_wdt_exit);
-MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index 29a7cd4..b146082 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -329,4 +329,4 @@
MODULE_DESCRIPTION("GE watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-MODULE_ALIAS("platform: gef_wdt");
+MODULE_ALIAS("platform:gef_wdt");
diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c
index 919bdd1..ba43860 100644
--- a/drivers/watchdog/intel_scu_watchdog.c
+++ b/drivers/watchdog/intel_scu_watchdog.c
@@ -42,7 +42,6 @@
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/sfi.h>
-#include <linux/types.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <asm/intel_scu_ipc.h>
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index 1479dc4..0430e09 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -66,23 +66,18 @@
int default_ticks;
unsigned long inuse;
unsigned gpio;
- int gstate;
+ unsigned int gstate;
} mtx1_wdt_device;
static void mtx1_wdt_trigger(unsigned long unused)
{
- u32 tmp;
-
spin_lock(&mtx1_wdt_device.lock);
if (mtx1_wdt_device.running)
ticks--;
/* toggle wdt gpio */
- mtx1_wdt_device.gstate = ~mtx1_wdt_device.gstate;
- if (mtx1_wdt_device.gstate)
- gpio_direction_output(mtx1_wdt_device.gpio, 1);
- else
- gpio_direction_input(mtx1_wdt_device.gpio);
+ mtx1_wdt_device.gstate = !mtx1_wdt_device.gstate;
+ gpio_set_value(mtx1_wdt_device.gpio, mtx1_wdt_device.gstate);
if (mtx1_wdt_device.queue && ticks)
mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
@@ -105,7 +100,7 @@
if (!mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 1;
mtx1_wdt_device.gstate = 1;
- gpio_direction_output(mtx1_wdt_device.gpio, 1);
+ gpio_set_value(mtx1_wdt_device.gpio, 1);
mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
}
mtx1_wdt_device.running++;
@@ -120,7 +115,7 @@
if (mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 0;
mtx1_wdt_device.gstate = 0;
- gpio_direction_output(mtx1_wdt_device.gpio, 0);
+ gpio_set_value(mtx1_wdt_device.gpio, 0);
}
ticks = mtx1_wdt_device.default_ticks;
spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
@@ -214,6 +209,12 @@
int ret;
mtx1_wdt_device.gpio = pdev->resource[0].start;
+ ret = gpio_request_one(mtx1_wdt_device.gpio,
+ GPIOF_OUT_INIT_HIGH, "mtx1-wdt");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request gpio");
+ return ret;
+ }
spin_lock_init(&mtx1_wdt_device.lock);
init_completion(&mtx1_wdt_device.stop);
@@ -239,11 +240,13 @@
mtx1_wdt_device.queue = 0;
wait_for_completion(&mtx1_wdt_device.stop);
}
+
+ gpio_free(mtx1_wdt_device.gpio);
misc_deregister(&mtx1_wdt_misc);
return 0;
}
-static struct platform_driver mtx1_wdt = {
+static struct platform_driver mtx1_wdt_driver = {
.probe = mtx1_wdt_probe,
.remove = __devexit_p(mtx1_wdt_remove),
.driver.name = "mtx1-wdt",
@@ -252,12 +255,12 @@
static int __init mtx1_wdt_init(void)
{
- return platform_driver_register(&mtx1_wdt);
+ return platform_driver_register(&mtx1_wdt_driver);
}
static void __exit mtx1_wdt_exit(void)
{
- platform_driver_unregister(&mtx1_wdt);
+ platform_driver_unregister(&mtx1_wdt_driver);
}
module_init(mtx1_wdt_init);
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
index 8c4b2d5..871caea 100644
--- a/drivers/watchdog/wm831x_wdt.c
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -320,6 +320,11 @@
struct wm831x_watchdog_pdata *pdata;
int reg, ret;
+ if (wm831x) {
+ dev_err(&pdev->dev, "wm831x watchdog already registered\n");
+ return -EBUSY;
+ }
+
wm831x = dev_get_drvdata(pdev->dev.parent);
ret = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 3ff822b..30df85d 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -395,9 +395,9 @@
static void xen_irq_init(unsigned irq)
{
struct irq_info *info;
+#ifdef CONFIG_SMP
struct irq_desc *desc = irq_to_desc(irq);
-#ifdef CONFIG_SMP
/* By default all event channels notify CPU#0. */
cpumask_copy(desc->irq_data.affinity, cpumask_of(0));
#endif
@@ -626,6 +626,9 @@
*
* Note: We don't assign an event channel until the irq actually started
* up. Return an existing irq if we've already got one for the gsi.
+ *
+ * Shareable implies level triggered, not shareable implies edge
+ * triggered here.
*/
int xen_bind_pirq_gsi_to_irq(unsigned gsi,
unsigned pirq, int shareable, char *name)
@@ -664,16 +667,13 @@
pirq_query_unmask(irq);
/* We try to use the handler with the appropriate semantic for the
- * type of interrupt: if the interrupt doesn't need an eoi
- * (pirq_needs_eoi returns false), we treat it like an edge
- * triggered interrupt so we use handle_edge_irq.
- * As a matter of fact this only happens when the corresponding
- * physical interrupt is edge triggered or an msi.
+ * type of interrupt: if the interrupt is an edge triggered
+ * interrupt we use handle_edge_irq.
*
- * On the other hand if the interrupt needs an eoi (pirq_needs_eoi
- * returns true) we treat it like a level triggered interrupt so we
- * use handle_fasteoi_irq like the native code does for this kind of
+ * On the other hand if the interrupt is level triggered we use
+ * handle_fasteoi_irq like the native code does for this kind of
* interrupts.
+ *
* Depending on the Xen version, pirq_needs_eoi might return true
* not only for level triggered interrupts but for edge triggered
* interrupts too. In any case Xen always honors the eoi mechanism,
@@ -681,7 +681,7 @@
* hasn't received an eoi yet. Therefore using the fasteoi handler
* is the right choice either way.
*/
- if (pirq_needs_eoi(irq))
+ if (shareable)
irq_set_chip_and_handler_name(irq, &xen_pirq_chip,
handle_fasteoi_irq, name);
else
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 65ea21a..6e8c15a 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -147,9 +147,15 @@
{
unsigned long bytes;
int rc;
+ unsigned long nr_tbl;
- xen_io_tlb_nslabs = (64 * 1024 * 1024 >> IO_TLB_SHIFT);
- xen_io_tlb_nslabs = ALIGN(xen_io_tlb_nslabs, IO_TLB_SEGSIZE);
+ nr_tbl = swioltb_nr_tbl();
+ if (nr_tbl)
+ xen_io_tlb_nslabs = nr_tbl;
+ else {
+ xen_io_tlb_nslabs = (64 * 1024 * 1024 >> IO_TLB_SHIFT);
+ xen_io_tlb_nslabs = ALIGN(xen_io_tlb_nslabs, IO_TLB_SEGSIZE);
+ }
bytes = xen_io_tlb_nslabs << IO_TLB_SHIFT;
diff --git a/firmware/Makefile b/firmware/Makefile
index 0d15a3d..5f43bfb 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -82,6 +82,7 @@
fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
advansys/3550.bin advansys/38C0800.bin
+fw-shipped-$(CONFIG_SCSI_ISCI) += isci/isci_firmware.bin
fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
qlogic/12160.bin
fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
diff --git a/firmware/isci/isci_firmware.bin.ihex b/firmware/isci/isci_firmware.bin.ihex
new file mode 100644
index 0000000..2e66195
--- /dev/null
+++ b/firmware/isci/isci_firmware.bin.ihex
@@ -0,0 +1,16 @@
+:10000000495343554F454D42E80018100002000087
+:1000100000000000000000000101000000000000DE
+:10002000FFFFCF5F0100000008DD0B0000FC0F00A8
+:10003000097C0B006EFC0A00FFFFCF5F010000008F
+:1000400008DD0B0000FC0F00097C0B006EFC0A00B1
+:10005000FFFFCF5F0100000008DD0B0000FC0F0078
+:10006000097C0B006EFC0A00FFFFCF5F010000005F
+:1000700008DD0B0000FC0F00097C0B006EFC0A0081
+:100080000101000000000000FFFFCF5F0200000040
+:1000900008DD0B0000FC0F00097C0B006EFC0A0061
+:1000A000FFFFCF5F0200000008DD0B0000FC0F0027
+:1000B000097C0B006EFC0A00FFFFCF5F020000000E
+:1000C00008DD0B0000FC0F00097C0B006EFC0A0031
+:1000D000FFFFCF5F0200000008DD0B0000FC0F00F7
+:0800E000097C0B006EFC0A0014
+:00000001FF
diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index 20c106f..1b0b195 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -584,11 +584,11 @@
success:
d_add(dentry, inode);
- _leave(" = 0 { vn=%u u=%u } -> { ino=%lu v=%llu }",
+ _leave(" = 0 { vn=%u u=%u } -> { ino=%lu v=%u }",
fid.vnode,
fid.unique,
dentry->d_inode->i_ino,
- (unsigned long long)dentry->d_inode->i_version);
+ dentry->d_inode->i_generation);
return NULL;
}
@@ -671,10 +671,10 @@
* been deleted and replaced, and the original vnode ID has
* been reused */
if (fid.unique != vnode->fid.unique) {
- _debug("%s: file deleted (uq %u -> %u I:%llu)",
+ _debug("%s: file deleted (uq %u -> %u I:%u)",
dentry->d_name.name, fid.unique,
vnode->fid.unique,
- (unsigned long long)dentry->d_inode->i_version);
+ dentry->d_inode->i_generation);
spin_lock(&vnode->lock);
set_bit(AFS_VNODE_DELETED, &vnode->flags);
spin_unlock(&vnode->lock);
diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c
index 4bd0218..346e328 100644
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -89,7 +89,7 @@
i_size_write(&vnode->vfs_inode, size);
vnode->vfs_inode.i_uid = status->owner;
vnode->vfs_inode.i_gid = status->group;
- vnode->vfs_inode.i_version = vnode->fid.unique;
+ vnode->vfs_inode.i_generation = vnode->fid.unique;
vnode->vfs_inode.i_nlink = status->nlink;
mode = vnode->vfs_inode.i_mode;
@@ -102,6 +102,7 @@
vnode->vfs_inode.i_ctime.tv_sec = status->mtime_server;
vnode->vfs_inode.i_mtime = vnode->vfs_inode.i_ctime;
vnode->vfs_inode.i_atime = vnode->vfs_inode.i_ctime;
+ vnode->vfs_inode.i_version = data_version;
}
expected_version = status->data_version;
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index db66c52..0fdab6e 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -75,7 +75,8 @@
inode->i_ctime.tv_nsec = 0;
inode->i_atime = inode->i_mtime = inode->i_ctime;
inode->i_blocks = 0;
- inode->i_version = vnode->fid.unique;
+ inode->i_generation = vnode->fid.unique;
+ inode->i_version = vnode->status.data_version;
inode->i_mapping->a_ops = &afs_fs_aops;
/* check to see whether a symbolic link is really a mountpoint */
@@ -100,7 +101,7 @@
struct afs_iget_data *data = opaque;
return inode->i_ino == data->fid.vnode &&
- inode->i_version == data->fid.unique;
+ inode->i_generation == data->fid.unique;
}
/*
@@ -122,7 +123,7 @@
struct afs_vnode *vnode = AFS_FS_I(inode);
inode->i_ino = data->fid.vnode;
- inode->i_version = data->fid.unique;
+ inode->i_generation = data->fid.unique;
vnode->fid = data->fid;
vnode->volume = data->volume;
@@ -380,8 +381,7 @@
inode = dentry->d_inode;
- _enter("{ ino=%lu v=%llu }", inode->i_ino,
- (unsigned long long)inode->i_version);
+ _enter("{ ino=%lu v=%u }", inode->i_ino, inode->i_generation);
generic_fillattr(inode, stat);
return 0;
diff --git a/fs/afs/super.c b/fs/afs/super.c
index fb240e8..356dcf0 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -31,8 +31,8 @@
static void afs_i_init_once(void *foo);
static struct dentry *afs_mount(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data);
+static void afs_kill_super(struct super_block *sb);
static struct inode *afs_alloc_inode(struct super_block *sb);
-static void afs_put_super(struct super_block *sb);
static void afs_destroy_inode(struct inode *inode);
static int afs_statfs(struct dentry *dentry, struct kstatfs *buf);
@@ -40,7 +40,7 @@
.owner = THIS_MODULE,
.name = "afs",
.mount = afs_mount,
- .kill_sb = kill_anon_super,
+ .kill_sb = afs_kill_super,
.fs_flags = 0,
};
@@ -50,7 +50,6 @@
.drop_inode = afs_drop_inode,
.destroy_inode = afs_destroy_inode,
.evict_inode = afs_evict_inode,
- .put_super = afs_put_super,
.show_options = generic_show_options,
};
@@ -282,19 +281,25 @@
*/
static int afs_test_super(struct super_block *sb, void *data)
{
- struct afs_mount_params *params = data;
+ struct afs_super_info *as1 = data;
struct afs_super_info *as = sb->s_fs_info;
- return as->volume == params->volume;
+ return as->volume == as1->volume;
+}
+
+static int afs_set_super(struct super_block *sb, void *data)
+{
+ sb->s_fs_info = data;
+ return set_anon_super(sb, NULL);
}
/*
* fill in the superblock
*/
-static int afs_fill_super(struct super_block *sb, void *data)
+static int afs_fill_super(struct super_block *sb,
+ struct afs_mount_params *params)
{
- struct afs_mount_params *params = data;
- struct afs_super_info *as = NULL;
+ struct afs_super_info *as = sb->s_fs_info;
struct afs_fid fid;
struct dentry *root = NULL;
struct inode *inode = NULL;
@@ -302,23 +307,13 @@
_enter("");
- /* allocate a superblock info record */
- as = kzalloc(sizeof(struct afs_super_info), GFP_KERNEL);
- if (!as) {
- _leave(" = -ENOMEM");
- return -ENOMEM;
- }
-
- afs_get_volume(params->volume);
- as->volume = params->volume;
-
/* fill in the superblock */
sb->s_blocksize = PAGE_CACHE_SIZE;
sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
sb->s_magic = AFS_FS_MAGIC;
sb->s_op = &afs_super_ops;
- sb->s_fs_info = as;
sb->s_bdi = &as->volume->bdi;
+ strlcpy(sb->s_id, as->volume->vlocation->vldb.name, sizeof(sb->s_id));
/* allocate the root inode and dentry */
fid.vid = as->volume->vid;
@@ -326,7 +321,7 @@
fid.unique = 1;
inode = afs_iget(sb, params->key, &fid, NULL, NULL);
if (IS_ERR(inode))
- goto error_inode;
+ return PTR_ERR(inode);
if (params->autocell)
set_bit(AFS_VNODE_AUTOCELL, &AFS_FS_I(inode)->flags);
@@ -342,16 +337,8 @@
_leave(" = 0");
return 0;
-error_inode:
- ret = PTR_ERR(inode);
- inode = NULL;
error:
iput(inode);
- afs_put_volume(as->volume);
- kfree(as);
-
- sb->s_fs_info = NULL;
-
_leave(" = %d", ret);
return ret;
}
@@ -367,6 +354,7 @@
struct afs_volume *vol;
struct key *key;
char *new_opts = kstrdup(options, GFP_KERNEL);
+ struct afs_super_info *as;
int ret;
_enter(",,%s,%p", dev_name, options);
@@ -399,12 +387,22 @@
ret = PTR_ERR(vol);
goto error;
}
- params.volume = vol;
+
+ /* allocate a superblock info record */
+ as = kzalloc(sizeof(struct afs_super_info), GFP_KERNEL);
+ if (!as) {
+ ret = -ENOMEM;
+ afs_put_volume(vol);
+ goto error;
+ }
+ as->volume = vol;
/* allocate a deviceless superblock */
- sb = sget(fs_type, afs_test_super, set_anon_super, ¶ms);
+ sb = sget(fs_type, afs_test_super, afs_set_super, as);
if (IS_ERR(sb)) {
ret = PTR_ERR(sb);
+ afs_put_volume(vol);
+ kfree(as);
goto error;
}
@@ -422,16 +420,16 @@
} else {
_debug("reuse");
ASSERTCMP(sb->s_flags, &, MS_ACTIVE);
+ afs_put_volume(vol);
+ kfree(as);
}
- afs_put_volume(params.volume);
afs_put_cell(params.cell);
kfree(new_opts);
_leave(" = 0 [%p]", sb);
return dget(sb->s_root);
error:
- afs_put_volume(params.volume);
afs_put_cell(params.cell);
key_put(params.key);
kfree(new_opts);
@@ -439,18 +437,12 @@
return ERR_PTR(ret);
}
-/*
- * finish the unmounting process on the superblock
- */
-static void afs_put_super(struct super_block *sb)
+static void afs_kill_super(struct super_block *sb)
{
struct afs_super_info *as = sb->s_fs_info;
-
- _enter("");
-
+ kill_anon_super(sb);
afs_put_volume(as->volume);
-
- _leave("");
+ kfree(as);
}
/*
diff --git a/fs/afs/write.c b/fs/afs/write.c
index 789b3af..b806285 100644
--- a/fs/afs/write.c
+++ b/fs/afs/write.c
@@ -84,23 +84,21 @@
* partly or wholly fill a page that's under preparation for writing
*/
static int afs_fill_page(struct afs_vnode *vnode, struct key *key,
- loff_t pos, unsigned len, struct page *page)
+ loff_t pos, struct page *page)
{
loff_t i_size;
- unsigned eof;
int ret;
+ int len;
- _enter(",,%llu,%u", (unsigned long long)pos, len);
-
- ASSERTCMP(len, <=, PAGE_CACHE_SIZE);
+ _enter(",,%llu", (unsigned long long)pos);
i_size = i_size_read(&vnode->vfs_inode);
- if (pos + len > i_size)
- eof = i_size;
+ if (pos + PAGE_CACHE_SIZE > i_size)
+ len = i_size - pos;
else
- eof = PAGE_CACHE_SIZE;
+ len = PAGE_CACHE_SIZE;
- ret = afs_vnode_fetch_data(vnode, key, 0, eof, page);
+ ret = afs_vnode_fetch_data(vnode, key, pos, len, page);
if (ret < 0) {
if (ret == -ENOENT) {
_debug("got NOENT from server"
@@ -153,9 +151,8 @@
*pagep = page;
/* page won't leak in error case: it eventually gets cleaned off LRU */
- if (!PageUptodate(page)) {
- _debug("not up to date");
- ret = afs_fill_page(vnode, key, pos, len, page);
+ if (!PageUptodate(page) && len != PAGE_CACHE_SIZE) {
+ ret = afs_fill_page(vnode, key, index << PAGE_CACHE_SHIFT, page);
if (ret < 0) {
kfree(candidate);
_leave(" = %d [prep]", ret);
diff --git a/fs/bad_inode.c b/fs/bad_inode.c
index 9ad2369..bfcb18f 100644
--- a/fs/bad_inode.c
+++ b/fs/bad_inode.c
@@ -231,9 +231,6 @@
static int bad_inode_permission(struct inode *inode, int mask, unsigned int flags)
{
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
-
return -EIO;
}
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 63039ed..2bc5dc6 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1864,6 +1864,7 @@
kfree(psinfo);
kfree(notes);
kfree(fpu);
+ kfree(shdr4extnum);
#ifdef ELF_CORE_COPY_XFPREGS
kfree(xfpu);
#endif
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 1a2421f..610e8e0 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -762,7 +762,19 @@
if (!disk)
return ERR_PTR(-ENXIO);
- whole = bdget_disk(disk, 0);
+ /*
+ * Normally, @bdev should equal what's returned from bdget_disk()
+ * if partno is 0; however, some drivers (floppy) use multiple
+ * bdev's for the same physical device and @bdev may be one of the
+ * aliases. Keep @bdev if partno is 0. This means claimer
+ * tracking is broken for those devices but it has always been that
+ * way.
+ */
+ if (partno)
+ whole = bdget_disk(disk, 0);
+ else
+ whole = bdgrab(bdev);
+
module_put(disk->fops->owner);
put_disk(disk);
if (!whole)
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index d840893..2e66786 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -1228,6 +1228,7 @@
u32 nr;
u32 blocksize;
u32 nscan = 0;
+ bool map = true;
if (level != 1)
return;
@@ -1249,8 +1250,11 @@
nritems = btrfs_header_nritems(node);
nr = slot;
+ if (node->map_token || path->skip_locking)
+ map = false;
+
while (1) {
- if (!node->map_token) {
+ if (map && !node->map_token) {
unsigned long offset = btrfs_node_key_ptr_offset(nr);
map_private_extent_buffer(node, offset,
sizeof(struct btrfs_key_ptr),
@@ -1277,7 +1281,7 @@
if ((search <= target && target - search <= 65536) ||
(search > target && search - target <= 65536)) {
gen = btrfs_node_ptr_generation(node, nr);
- if (node->map_token) {
+ if (map && node->map_token) {
unmap_extent_buffer(node, node->map_token,
KM_USER1);
node->map_token = NULL;
@@ -1289,7 +1293,7 @@
if ((nread > 65536 || nscan > 32))
break;
}
- if (node->map_token) {
+ if (map && node->map_token) {
unmap_extent_buffer(node, node->map_token, KM_USER1);
node->map_token = NULL;
}
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 378b5b4..3b859a3 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -19,7 +19,6 @@
#ifndef __BTRFS_CTREE__
#define __BTRFS_CTREE__
-#include <linux/version.h>
#include <linux/mm.h>
#include <linux/highmem.h>
#include <linux/fs.h>
@@ -967,6 +966,12 @@
struct srcu_struct subvol_srcu;
spinlock_t trans_lock;
+ /*
+ * the reloc mutex goes with the trans lock, it is taken
+ * during commit to protect us from the relocation code
+ */
+ struct mutex reloc_mutex;
+
struct list_head trans_list;
struct list_head hashers;
struct list_head dead_roots;
@@ -1172,6 +1177,14 @@
u32 type;
u64 highest_objectid;
+
+ /* btrfs_record_root_in_trans is a multi-step process,
+ * and it can race with the balancing code. But the
+ * race is very small, and only the first time the root
+ * is added to each transaction. So in_trans_setup
+ * is used to tell us when more checks are required
+ */
+ unsigned long in_trans_setup;
int ref_cows;
int track_dirty;
int in_radix;
@@ -1181,7 +1194,6 @@
struct btrfs_key defrag_max;
int defrag_running;
char *name;
- int in_sysfs;
/* the dirty list is only used by non-reference counted roots */
struct list_head dirty_list;
@@ -1323,6 +1335,11 @@
*/
#define BTRFS_STRING_ITEM_KEY 253
+/*
+ * Flags for mount options.
+ *
+ * Note: don't forget to add new options to btrfs_show_options()
+ */
#define BTRFS_MOUNT_NODATASUM (1 << 0)
#define BTRFS_MOUNT_NODATACOW (1 << 1)
#define BTRFS_MOUNT_NOBARRIER (1 << 2)
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index 6462c29..98c68e6 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -82,6 +82,39 @@
return root->fs_info->delayed_root;
}
+static struct btrfs_delayed_node *btrfs_get_delayed_node(struct inode *inode)
+{
+ struct btrfs_inode *btrfs_inode = BTRFS_I(inode);
+ struct btrfs_root *root = btrfs_inode->root;
+ u64 ino = btrfs_ino(inode);
+ struct btrfs_delayed_node *node;
+
+ node = ACCESS_ONCE(btrfs_inode->delayed_node);
+ if (node) {
+ atomic_inc(&node->refs);
+ return node;
+ }
+
+ spin_lock(&root->inode_lock);
+ node = radix_tree_lookup(&root->delayed_nodes_tree, ino);
+ if (node) {
+ if (btrfs_inode->delayed_node) {
+ atomic_inc(&node->refs); /* can be accessed */
+ BUG_ON(btrfs_inode->delayed_node != node);
+ spin_unlock(&root->inode_lock);
+ return node;
+ }
+ btrfs_inode->delayed_node = node;
+ atomic_inc(&node->refs); /* can be accessed */
+ atomic_inc(&node->refs); /* cached in the inode */
+ spin_unlock(&root->inode_lock);
+ return node;
+ }
+ spin_unlock(&root->inode_lock);
+
+ return NULL;
+}
+
static struct btrfs_delayed_node *btrfs_get_or_create_delayed_node(
struct inode *inode)
{
@@ -92,26 +125,9 @@
int ret;
again:
- node = ACCESS_ONCE(btrfs_inode->delayed_node);
- if (node) {
- atomic_inc(&node->refs); /* can be accessed */
+ node = btrfs_get_delayed_node(inode);
+ if (node)
return node;
- }
-
- spin_lock(&root->inode_lock);
- node = radix_tree_lookup(&root->delayed_nodes_tree, ino);
- if (node) {
- if (btrfs_inode->delayed_node) {
- spin_unlock(&root->inode_lock);
- goto again;
- }
- btrfs_inode->delayed_node = node;
- atomic_inc(&node->refs); /* can be accessed */
- atomic_inc(&node->refs); /* cached in the inode */
- spin_unlock(&root->inode_lock);
- return node;
- }
- spin_unlock(&root->inode_lock);
node = kmem_cache_alloc(delayed_node_cache, GFP_NOFS);
if (!node)
@@ -297,7 +313,6 @@
item->data_len = data_len;
item->ins_or_del = 0;
item->bytes_reserved = 0;
- item->block_rsv = NULL;
item->delayed_node = NULL;
atomic_set(&item->refs, 1);
}
@@ -549,19 +564,6 @@
return next;
}
-static inline struct btrfs_delayed_node *btrfs_get_delayed_node(
- struct inode *inode)
-{
- struct btrfs_inode *btrfs_inode = BTRFS_I(inode);
- struct btrfs_delayed_node *delayed_node;
-
- delayed_node = btrfs_inode->delayed_node;
- if (delayed_node)
- atomic_inc(&delayed_node->refs);
-
- return delayed_node;
-}
-
static inline struct btrfs_root *btrfs_get_fs_root(struct btrfs_root *root,
u64 root_id)
{
@@ -593,10 +595,8 @@
num_bytes = btrfs_calc_trans_metadata_size(root, 1);
ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes);
- if (!ret) {
+ if (!ret)
item->bytes_reserved = num_bytes;
- item->block_rsv = dst_rsv;
- }
return ret;
}
@@ -604,10 +604,13 @@
static void btrfs_delayed_item_release_metadata(struct btrfs_root *root,
struct btrfs_delayed_item *item)
{
+ struct btrfs_block_rsv *rsv;
+
if (!item->bytes_reserved)
return;
- btrfs_block_rsv_release(root, item->block_rsv,
+ rsv = &root->fs_info->global_block_rsv;
+ btrfs_block_rsv_release(root, rsv,
item->bytes_reserved);
}
@@ -1014,6 +1017,7 @@
struct btrfs_delayed_root *delayed_root;
struct btrfs_delayed_node *curr_node, *prev_node;
struct btrfs_path *path;
+ struct btrfs_block_rsv *block_rsv;
int ret = 0;
path = btrfs_alloc_path();
@@ -1021,6 +1025,9 @@
return -ENOMEM;
path->leave_spinning = 1;
+ block_rsv = trans->block_rsv;
+ trans->block_rsv = &root->fs_info->global_block_rsv;
+
delayed_root = btrfs_get_delayed_root(root);
curr_node = btrfs_first_delayed_node(delayed_root);
@@ -1045,6 +1052,7 @@
}
btrfs_free_path(path);
+ trans->block_rsv = block_rsv;
return ret;
}
@@ -1052,6 +1060,7 @@
struct btrfs_delayed_node *node)
{
struct btrfs_path *path;
+ struct btrfs_block_rsv *block_rsv;
int ret;
path = btrfs_alloc_path();
@@ -1059,6 +1068,9 @@
return -ENOMEM;
path->leave_spinning = 1;
+ block_rsv = trans->block_rsv;
+ trans->block_rsv = &node->root->fs_info->global_block_rsv;
+
ret = btrfs_insert_delayed_items(trans, path, node->root, node);
if (!ret)
ret = btrfs_delete_delayed_items(trans, path, node->root, node);
@@ -1066,6 +1078,7 @@
ret = btrfs_update_delayed_inode(trans, node->root, path, node);
btrfs_free_path(path);
+ trans->block_rsv = block_rsv;
return ret;
}
@@ -1116,6 +1129,7 @@
struct btrfs_path *path;
struct btrfs_delayed_node *delayed_node = NULL;
struct btrfs_root *root;
+ struct btrfs_block_rsv *block_rsv;
unsigned long nr = 0;
int need_requeue = 0;
int ret;
@@ -1134,6 +1148,9 @@
if (IS_ERR(trans))
goto free_path;
+ block_rsv = trans->block_rsv;
+ trans->block_rsv = &root->fs_info->global_block_rsv;
+
ret = btrfs_insert_delayed_items(trans, path, root, delayed_node);
if (!ret)
ret = btrfs_delete_delayed_items(trans, path, root,
@@ -1176,6 +1193,7 @@
nr = trans->blocks_used;
+ trans->block_rsv = block_rsv;
btrfs_end_transaction_dmeta(trans, root);
__btrfs_btree_balance_dirty(root, nr);
free_path:
@@ -1222,6 +1240,13 @@
return 0;
}
+void btrfs_assert_delayed_root_empty(struct btrfs_root *root)
+{
+ struct btrfs_delayed_root *delayed_root;
+ delayed_root = btrfs_get_delayed_root(root);
+ WARN_ON(btrfs_first_delayed_node(delayed_root));
+}
+
void btrfs_balance_delayed_items(struct btrfs_root *root)
{
struct btrfs_delayed_root *delayed_root;
@@ -1382,8 +1407,7 @@
int btrfs_inode_delayed_dir_index_count(struct inode *inode)
{
- struct btrfs_delayed_node *delayed_node = BTRFS_I(inode)->delayed_node;
- int ret = 0;
+ struct btrfs_delayed_node *delayed_node = btrfs_get_delayed_node(inode);
if (!delayed_node)
return -ENOENT;
@@ -1393,11 +1417,14 @@
* a new directory index is added into the delayed node and index_cnt
* is updated now. So we needn't lock the delayed node.
*/
- if (!delayed_node->index_cnt)
+ if (!delayed_node->index_cnt) {
+ btrfs_release_delayed_node(delayed_node);
return -EINVAL;
+ }
BTRFS_I(inode)->index_cnt = delayed_node->index_cnt;
- return ret;
+ btrfs_release_delayed_node(delayed_node);
+ return 0;
}
void btrfs_get_delayed_items(struct inode *inode, struct list_head *ins_list,
@@ -1591,6 +1618,57 @@
inode->i_ctime.tv_nsec);
}
+int btrfs_fill_inode(struct inode *inode, u32 *rdev)
+{
+ struct btrfs_delayed_node *delayed_node;
+ struct btrfs_inode_item *inode_item;
+ struct btrfs_timespec *tspec;
+
+ delayed_node = btrfs_get_delayed_node(inode);
+ if (!delayed_node)
+ return -ENOENT;
+
+ mutex_lock(&delayed_node->mutex);
+ if (!delayed_node->inode_dirty) {
+ mutex_unlock(&delayed_node->mutex);
+ btrfs_release_delayed_node(delayed_node);
+ return -ENOENT;
+ }
+
+ inode_item = &delayed_node->inode_item;
+
+ inode->i_uid = btrfs_stack_inode_uid(inode_item);
+ inode->i_gid = btrfs_stack_inode_gid(inode_item);
+ btrfs_i_size_write(inode, btrfs_stack_inode_size(inode_item));
+ inode->i_mode = btrfs_stack_inode_mode(inode_item);
+ inode->i_nlink = btrfs_stack_inode_nlink(inode_item);
+ inode_set_bytes(inode, btrfs_stack_inode_nbytes(inode_item));
+ BTRFS_I(inode)->generation = btrfs_stack_inode_generation(inode_item);
+ BTRFS_I(inode)->sequence = btrfs_stack_inode_sequence(inode_item);
+ inode->i_rdev = 0;
+ *rdev = btrfs_stack_inode_rdev(inode_item);
+ BTRFS_I(inode)->flags = btrfs_stack_inode_flags(inode_item);
+
+ tspec = btrfs_inode_atime(inode_item);
+ inode->i_atime.tv_sec = btrfs_stack_timespec_sec(tspec);
+ inode->i_atime.tv_nsec = btrfs_stack_timespec_nsec(tspec);
+
+ tspec = btrfs_inode_mtime(inode_item);
+ inode->i_mtime.tv_sec = btrfs_stack_timespec_sec(tspec);
+ inode->i_mtime.tv_nsec = btrfs_stack_timespec_nsec(tspec);
+
+ tspec = btrfs_inode_ctime(inode_item);
+ inode->i_ctime.tv_sec = btrfs_stack_timespec_sec(tspec);
+ inode->i_ctime.tv_nsec = btrfs_stack_timespec_nsec(tspec);
+
+ inode->i_generation = BTRFS_I(inode)->generation;
+ BTRFS_I(inode)->index_cnt = (u64)-1;
+
+ mutex_unlock(&delayed_node->mutex);
+ btrfs_release_delayed_node(delayed_node);
+ return 0;
+}
+
int btrfs_delayed_update_inode(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode)
{
diff --git a/fs/btrfs/delayed-inode.h b/fs/btrfs/delayed-inode.h
index eb7d240..8d27af4 100644
--- a/fs/btrfs/delayed-inode.h
+++ b/fs/btrfs/delayed-inode.h
@@ -75,7 +75,6 @@
struct list_head tree_list; /* used for batch insert/delete items */
struct list_head readdir_list; /* used for readdir items */
u64 bytes_reserved;
- struct btrfs_block_rsv *block_rsv;
struct btrfs_delayed_node *delayed_node;
atomic_t refs;
int ins_or_del;
@@ -120,6 +119,7 @@
int btrfs_delayed_update_inode(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode);
+int btrfs_fill_inode(struct inode *inode, u32 *rdev);
/* Used for drop dead root */
void btrfs_kill_all_delayed_nodes(struct btrfs_root *root);
@@ -138,4 +138,8 @@
/* for init */
int __init btrfs_delayed_inode_init(void);
void btrfs_delayed_inode_exit(void);
+
+/* for debugging */
+void btrfs_assert_delayed_root_empty(struct btrfs_root *root);
+
#endif
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index a203d36..1ac8db5d 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1044,7 +1044,6 @@
root->last_trans = 0;
root->highest_objectid = 0;
root->name = NULL;
- root->in_sysfs = 0;
root->inode_tree = RB_ROOT;
INIT_RADIX_TREE(&root->delayed_nodes_tree, GFP_ATOMIC);
root->block_rsv = NULL;
@@ -1300,19 +1299,21 @@
return root;
root->free_ino_ctl = kzalloc(sizeof(*root->free_ino_ctl), GFP_NOFS);
- if (!root->free_ino_ctl)
- goto fail;
root->free_ino_pinned = kzalloc(sizeof(*root->free_ino_pinned),
GFP_NOFS);
- if (!root->free_ino_pinned)
+ if (!root->free_ino_pinned || !root->free_ino_ctl) {
+ ret = -ENOMEM;
goto fail;
+ }
btrfs_init_free_ino_ctl(root);
mutex_init(&root->fs_commit_mutex);
spin_lock_init(&root->cache_lock);
init_waitqueue_head(&root->cache_wait);
- set_anon_super(&root->anon_super, NULL);
+ ret = set_anon_super(&root->anon_super, NULL);
+ if (ret)
+ goto fail;
if (btrfs_root_refs(&root->root_item) == 0) {
ret = -ENOENT;
@@ -1618,6 +1619,7 @@
spin_lock_init(&fs_info->fs_roots_radix_lock);
spin_lock_init(&fs_info->delayed_iput_lock);
spin_lock_init(&fs_info->defrag_inodes_lock);
+ mutex_init(&fs_info->reloc_mutex);
init_completion(&fs_info->kobj_unregister);
fs_info->tree_root = tree_root;
@@ -1668,8 +1670,6 @@
init_waitqueue_head(&fs_info->scrub_pause_wait);
init_rwsem(&fs_info->scrub_super_lock);
fs_info->scrub_workers_refcnt = 0;
- btrfs_init_workers(&fs_info->scrub_workers, "scrub",
- fs_info->thread_pool_size, &fs_info->generic_worker);
sb->s_blocksize = 4096;
sb->s_blocksize_bits = blksize_bits(4096);
@@ -2911,9 +2911,8 @@
INIT_LIST_HEAD(&splice);
- list_splice_init(&root->fs_info->delalloc_inodes, &splice);
-
spin_lock(&root->fs_info->delalloc_lock);
+ list_splice_init(&root->fs_info->delalloc_inodes, &splice);
while (!list_empty(&splice)) {
btrfs_inode = list_entry(splice.next, struct btrfs_inode,
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 5b9b6b6..71cd456 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -3089,6 +3089,13 @@
}
goto again;
}
+
+ /*
+ * If we have less pinned bytes than we want to allocate then
+ * don't bother committing the transaction, it won't help us.
+ */
+ if (data_sinfo->bytes_pinned < bytes)
+ committed = 1;
spin_unlock(&data_sinfo->lock);
/* commit the current transaction and try again */
@@ -3307,10 +3314,6 @@
if (reserved == 0)
return 0;
- /* nothing to shrink - nothing to reclaim */
- if (root->fs_info->delalloc_bytes == 0)
- return 0;
-
max_reclaim = min(reserved, to_reclaim);
while (loops < 1024) {
@@ -4839,7 +4842,7 @@
u64 num_bytes, u64 empty_size,
u64 search_start, u64 search_end,
u64 hint_byte, struct btrfs_key *ins,
- int data)
+ u64 data)
{
int ret = 0;
struct btrfs_root *root = orig_root->fs_info->extent_root;
@@ -4866,7 +4869,7 @@
space_info = __find_space_info(root->fs_info, data);
if (!space_info) {
- printk(KERN_ERR "No space info for %d\n", data);
+ printk(KERN_ERR "No space info for %llu\n", data);
return -ENOSPC;
}
@@ -5211,9 +5214,7 @@
* LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try
* again
*/
- if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE &&
- (found_uncached_bg || empty_size || empty_cluster ||
- allowed_chunk_alloc)) {
+ if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE) {
index = 0;
if (loop == LOOP_FIND_IDEAL && found_uncached_bg) {
found_uncached_bg = false;
@@ -5253,32 +5254,36 @@
goto search;
}
- if (loop < LOOP_CACHING_WAIT) {
- loop++;
- goto search;
- }
+ loop++;
if (loop == LOOP_ALLOC_CHUNK) {
+ if (allowed_chunk_alloc) {
+ ret = do_chunk_alloc(trans, root, num_bytes +
+ 2 * 1024 * 1024, data,
+ CHUNK_ALLOC_LIMITED);
+ allowed_chunk_alloc = 0;
+ if (ret == 1)
+ done_chunk_alloc = 1;
+ } else if (!done_chunk_alloc &&
+ space_info->force_alloc ==
+ CHUNK_ALLOC_NO_FORCE) {
+ space_info->force_alloc = CHUNK_ALLOC_LIMITED;
+ }
+
+ /*
+ * We didn't allocate a chunk, go ahead and drop the
+ * empty size and loop again.
+ */
+ if (!done_chunk_alloc)
+ loop = LOOP_NO_EMPTY_SIZE;
+ }
+
+ if (loop == LOOP_NO_EMPTY_SIZE) {
empty_size = 0;
empty_cluster = 0;
}
- if (allowed_chunk_alloc) {
- ret = do_chunk_alloc(trans, root, num_bytes +
- 2 * 1024 * 1024, data,
- CHUNK_ALLOC_LIMITED);
- allowed_chunk_alloc = 0;
- done_chunk_alloc = 1;
- } else if (!done_chunk_alloc &&
- space_info->force_alloc == CHUNK_ALLOC_NO_FORCE) {
- space_info->force_alloc = CHUNK_ALLOC_LIMITED;
- }
-
- if (loop < LOOP_NO_EMPTY_SIZE) {
- loop++;
- goto search;
- }
- ret = -ENOSPC;
+ goto search;
} else if (!ins->objectid) {
ret = -ENOSPC;
} else if (ins->objectid) {
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index 4e8445a..a11a92e 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -126,9 +126,9 @@
unsigned long map_len;
struct page *first_page;
unsigned long bflags;
- atomic_t refs;
struct list_head leak_list;
struct rcu_head rcu_head;
+ atomic_t refs;
/* the spinlock is used to protect most operations */
spinlock_t lock;
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index ad14473..bf0d615 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -250,7 +250,7 @@
pgoff_t index = 0;
unsigned long first_page_offset;
int num_checksums;
- int ret = 0, ret2;
+ int ret = 0;
INIT_LIST_HEAD(&bitmaps);
@@ -421,11 +421,10 @@
goto free_cache;
}
spin_lock(&ctl->tree_lock);
- ret2 = link_free_space(ctl, e);
+ ret = link_free_space(ctl, e);
ctl->total_bitmaps++;
ctl->op->recalc_thresholds(ctl);
spin_unlock(&ctl->tree_lock);
- list_add_tail(&e->list, &bitmaps);
if (ret) {
printk(KERN_ERR "Duplicate entries in "
"free space cache, dumping\n");
@@ -434,6 +433,7 @@
page_cache_release(page);
goto free_cache;
}
+ list_add_tail(&e->list, &bitmaps);
}
num_entries--;
@@ -1417,6 +1417,23 @@
return 0;
}
+static u64 add_bytes_to_bitmap(struct btrfs_free_space_ctl *ctl,
+ struct btrfs_free_space *info, u64 offset,
+ u64 bytes)
+{
+ u64 bytes_to_set = 0;
+ u64 end;
+
+ end = info->offset + (u64)(BITS_PER_BITMAP * ctl->unit);
+
+ bytes_to_set = min(end - offset, bytes);
+
+ bitmap_set_bits(ctl, info, offset, bytes_to_set);
+
+ return bytes_to_set;
+
+}
+
static bool use_bitmap(struct btrfs_free_space_ctl *ctl,
struct btrfs_free_space *info)
{
@@ -1453,12 +1470,18 @@
return true;
}
+static struct btrfs_free_space_op free_space_op = {
+ .recalc_thresholds = recalculate_thresholds,
+ .use_bitmap = use_bitmap,
+};
+
static int insert_into_bitmap(struct btrfs_free_space_ctl *ctl,
struct btrfs_free_space *info)
{
struct btrfs_free_space *bitmap_info;
+ struct btrfs_block_group_cache *block_group = NULL;
int added = 0;
- u64 bytes, offset, end;
+ u64 bytes, offset, bytes_added;
int ret;
bytes = info->bytes;
@@ -1467,7 +1490,49 @@
if (!ctl->op->use_bitmap(ctl, info))
return 0;
+ if (ctl->op == &free_space_op)
+ block_group = ctl->private;
again:
+ /*
+ * Since we link bitmaps right into the cluster we need to see if we
+ * have a cluster here, and if so and it has our bitmap we need to add
+ * the free space to that bitmap.
+ */
+ if (block_group && !list_empty(&block_group->cluster_list)) {
+ struct btrfs_free_cluster *cluster;
+ struct rb_node *node;
+ struct btrfs_free_space *entry;
+
+ cluster = list_entry(block_group->cluster_list.next,
+ struct btrfs_free_cluster,
+ block_group_list);
+ spin_lock(&cluster->lock);
+ node = rb_first(&cluster->root);
+ if (!node) {
+ spin_unlock(&cluster->lock);
+ goto no_cluster_bitmap;
+ }
+
+ entry = rb_entry(node, struct btrfs_free_space, offset_index);
+ if (!entry->bitmap) {
+ spin_unlock(&cluster->lock);
+ goto no_cluster_bitmap;
+ }
+
+ if (entry->offset == offset_to_bitmap(ctl, offset)) {
+ bytes_added = add_bytes_to_bitmap(ctl, entry,
+ offset, bytes);
+ bytes -= bytes_added;
+ offset += bytes_added;
+ }
+ spin_unlock(&cluster->lock);
+ if (!bytes) {
+ ret = 1;
+ goto out;
+ }
+ }
+
+no_cluster_bitmap:
bitmap_info = tree_search_offset(ctl, offset_to_bitmap(ctl, offset),
1, 0);
if (!bitmap_info) {
@@ -1475,19 +1540,10 @@
goto new_bitmap;
}
- end = bitmap_info->offset + (u64)(BITS_PER_BITMAP * ctl->unit);
-
- if (offset >= bitmap_info->offset && offset + bytes > end) {
- bitmap_set_bits(ctl, bitmap_info, offset, end - offset);
- bytes -= end - offset;
- offset = end;
- added = 0;
- } else if (offset >= bitmap_info->offset && offset + bytes <= end) {
- bitmap_set_bits(ctl, bitmap_info, offset, bytes);
- bytes = 0;
- } else {
- BUG();
- }
+ bytes_added = add_bytes_to_bitmap(ctl, bitmap_info, offset, bytes);
+ bytes -= bytes_added;
+ offset += bytes_added;
+ added = 0;
if (!bytes) {
ret = 1;
@@ -1766,11 +1822,6 @@
"\n", count);
}
-static struct btrfs_free_space_op free_space_op = {
- .recalc_thresholds = recalculate_thresholds,
- .use_bitmap = use_bitmap,
-};
-
void btrfs_init_free_space_ctl(struct btrfs_block_group_cache *block_group)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
@@ -1842,9 +1893,12 @@
while ((node = rb_last(&ctl->free_space_offset)) != NULL) {
info = rb_entry(node, struct btrfs_free_space, offset_index);
- unlink_free_space(ctl, info);
- kfree(info->bitmap);
- kmem_cache_free(btrfs_free_space_cachep, info);
+ if (!info->bitmap) {
+ unlink_free_space(ctl, info);
+ kmem_cache_free(btrfs_free_space_cachep, info);
+ } else {
+ free_bitmap(ctl, info);
+ }
if (need_resched()) {
spin_unlock(&ctl->tree_lock);
cond_resched();
@@ -2142,9 +2196,11 @@
/*
* This searches the block group for just extents to fill the cluster with.
*/
-static int setup_cluster_no_bitmap(struct btrfs_block_group_cache *block_group,
- struct btrfs_free_cluster *cluster,
- u64 offset, u64 bytes, u64 min_bytes)
+static noinline int
+setup_cluster_no_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_cluster *cluster,
+ struct list_head *bitmaps, u64 offset, u64 bytes,
+ u64 min_bytes)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
struct btrfs_free_space *first = NULL;
@@ -2166,6 +2222,8 @@
* extent entry.
*/
while (entry->bitmap) {
+ if (list_empty(&entry->list))
+ list_add_tail(&entry->list, bitmaps);
node = rb_next(&entry->offset_index);
if (!node)
return -ENOSPC;
@@ -2185,8 +2243,12 @@
return -ENOSPC;
entry = rb_entry(node, struct btrfs_free_space, offset_index);
- if (entry->bitmap)
+ if (entry->bitmap) {
+ if (list_empty(&entry->list))
+ list_add_tail(&entry->list, bitmaps);
continue;
+ }
+
/*
* we haven't filled the empty size and the window is
* very large. reset and try again
@@ -2238,9 +2300,11 @@
* This specifically looks for bitmaps that may work in the cluster, we assume
* that we have already failed to find extents that will work.
*/
-static int setup_cluster_bitmap(struct btrfs_block_group_cache *block_group,
- struct btrfs_free_cluster *cluster,
- u64 offset, u64 bytes, u64 min_bytes)
+static noinline int
+setup_cluster_bitmap(struct btrfs_block_group_cache *block_group,
+ struct btrfs_free_cluster *cluster,
+ struct list_head *bitmaps, u64 offset, u64 bytes,
+ u64 min_bytes)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
struct btrfs_free_space *entry;
@@ -2250,10 +2314,39 @@
if (ctl->total_bitmaps == 0)
return -ENOSPC;
+ /*
+ * First check our cached list of bitmaps and see if there is an entry
+ * here that will work.
+ */
+ list_for_each_entry(entry, bitmaps, list) {
+ if (entry->bytes < min_bytes)
+ continue;
+ ret = btrfs_bitmap_cluster(block_group, entry, cluster, offset,
+ bytes, min_bytes);
+ if (!ret)
+ return 0;
+ }
+
+ /*
+ * If we do have entries on our list and we are here then we didn't find
+ * anything, so go ahead and get the next entry after the last entry in
+ * this list and start the search from there.
+ */
+ if (!list_empty(bitmaps)) {
+ entry = list_entry(bitmaps->prev, struct btrfs_free_space,
+ list);
+ node = rb_next(&entry->offset_index);
+ if (!node)
+ return -ENOSPC;
+ entry = rb_entry(node, struct btrfs_free_space, offset_index);
+ goto search;
+ }
+
entry = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 0, 1);
if (!entry)
return -ENOSPC;
+search:
node = &entry->offset_index;
do {
entry = rb_entry(node, struct btrfs_free_space, offset_index);
@@ -2284,6 +2377,8 @@
u64 offset, u64 bytes, u64 empty_size)
{
struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl;
+ struct list_head bitmaps;
+ struct btrfs_free_space *entry, *tmp;
u64 min_bytes;
int ret;
@@ -2322,11 +2417,16 @@
goto out;
}
- ret = setup_cluster_no_bitmap(block_group, cluster, offset, bytes,
- min_bytes);
+ INIT_LIST_HEAD(&bitmaps);
+ ret = setup_cluster_no_bitmap(block_group, cluster, &bitmaps, offset,
+ bytes, min_bytes);
if (ret)
- ret = setup_cluster_bitmap(block_group, cluster, offset,
- bytes, min_bytes);
+ ret = setup_cluster_bitmap(block_group, cluster, &bitmaps,
+ offset, bytes, min_bytes);
+
+ /* Clear our temporary list */
+ list_for_each_entry_safe(entry, tmp, &bitmaps, list)
+ list_del_init(&entry->list);
if (!ret) {
atomic_inc(&block_group->count);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index ebf95f7..3601f0a 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -1986,7 +1986,7 @@
}
if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)
- return 0;
+ goto good;
if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID &&
test_range_bit(io_tree, start, end, EXTENT_NODATASUM, 1, NULL)) {
@@ -2509,6 +2509,11 @@
int maybe_acls;
u32 rdev;
int ret;
+ bool filled = false;
+
+ ret = btrfs_fill_inode(inode, &rdev);
+ if (!ret)
+ filled = true;
path = btrfs_alloc_path();
BUG_ON(!path);
@@ -2520,6 +2525,10 @@
goto make_bad;
leaf = path->nodes[0];
+
+ if (filled)
+ goto cache_acl;
+
inode_item = btrfs_item_ptr(leaf, path->slots[0],
struct btrfs_inode_item);
if (!leaf->map_token)
@@ -2556,7 +2565,7 @@
BTRFS_I(inode)->index_cnt = (u64)-1;
BTRFS_I(inode)->flags = btrfs_inode_flags(leaf, inode_item);
-
+cache_acl:
/*
* try to precache a NULL acl entry for files that don't have
* any xattrs or acls
@@ -2572,7 +2581,6 @@
}
btrfs_free_path(path);
- inode_item = NULL;
switch (inode->i_mode & S_IFMT) {
case S_IFREG:
@@ -2670,12 +2678,14 @@
int ret;
/*
- * If root is tree root, it means this inode is used to
- * store free space information. And these inodes are updated
- * when committing the transaction, so they needn't delaye to
- * be updated, or deadlock will occured.
+ * If the inode is a free space inode, we can deadlock during commit
+ * if we put it into the delayed code.
+ *
+ * The data relocation inode should also be directly updated
+ * without delay
*/
- if (!is_free_space_inode(root, inode)) {
+ if (!is_free_space_inode(root, inode)
+ && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) {
ret = btrfs_delayed_update_inode(trans, root, inode);
if (!ret)
btrfs_set_inode_last_trans(trans, inode);
@@ -3076,6 +3086,7 @@
ret = btrfs_update_inode(trans, root, dir);
BUG_ON(ret);
+ btrfs_free_path(path);
return 0;
}
@@ -3646,7 +3657,7 @@
btrfs_i_size_write(inode, 0);
while (1) {
- trans = btrfs_start_transaction(root, 0);
+ trans = btrfs_join_transaction(root);
BUG_ON(IS_ERR(trans));
trans->block_rsv = root->orphan_block_rsv;
@@ -4519,6 +4530,7 @@
inode_tree_add(inode);
trace_btrfs_inode_new(inode);
+ btrfs_set_inode_last_trans(trans, inode);
return inode;
fail:
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index ac37040..a3c4751 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -482,8 +482,10 @@
ret = btrfs_snap_reserve_metadata(trans, pending_snapshot);
BUG_ON(ret);
+ spin_lock(&root->fs_info->trans_lock);
list_add(&pending_snapshot->list,
&trans->transaction->pending_snapshots);
+ spin_unlock(&root->fs_info->trans_lock);
if (async_transid) {
*async_transid = trans->transid;
ret = btrfs_commit_transaction_async(trans,
@@ -2054,29 +2056,34 @@
static long btrfs_ioctl_fs_info(struct btrfs_root *root, void __user *arg)
{
- struct btrfs_ioctl_fs_info_args fi_args;
+ struct btrfs_ioctl_fs_info_args *fi_args;
struct btrfs_device *device;
struct btrfs_device *next;
struct btrfs_fs_devices *fs_devices = root->fs_info->fs_devices;
+ int ret = 0;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- fi_args.num_devices = fs_devices->num_devices;
- fi_args.max_id = 0;
- memcpy(&fi_args.fsid, root->fs_info->fsid, sizeof(fi_args.fsid));
+ fi_args = kzalloc(sizeof(*fi_args), GFP_KERNEL);
+ if (!fi_args)
+ return -ENOMEM;
+
+ fi_args->num_devices = fs_devices->num_devices;
+ memcpy(&fi_args->fsid, root->fs_info->fsid, sizeof(fi_args->fsid));
mutex_lock(&fs_devices->device_list_mutex);
list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) {
- if (device->devid > fi_args.max_id)
- fi_args.max_id = device->devid;
+ if (device->devid > fi_args->max_id)
+ fi_args->max_id = device->devid;
}
mutex_unlock(&fs_devices->device_list_mutex);
- if (copy_to_user(arg, &fi_args, sizeof(fi_args)))
- return -EFAULT;
+ if (copy_to_user(arg, fi_args, sizeof(*fi_args)))
+ ret = -EFAULT;
- return 0;
+ kfree(fi_args);
+ return ret;
}
static long btrfs_ioctl_dev_info(struct btrfs_root *root, void __user *arg)
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index b1ef27c..5e0a3dc 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -1368,7 +1368,7 @@
int ret;
if (!root->reloc_root)
- return 0;
+ goto out;
reloc_root = root->reloc_root;
root_item = &reloc_root->root_item;
@@ -1390,6 +1390,8 @@
ret = btrfs_update_root(trans, root->fs_info->tree_root,
&reloc_root->root_key, root_item);
BUG_ON(ret);
+
+out:
return 0;
}
@@ -2142,10 +2144,11 @@
u64 num_bytes = 0;
int ret;
- spin_lock(&root->fs_info->trans_lock);
+ mutex_lock(&root->fs_info->reloc_mutex);
rc->merging_rsv_size += root->nodesize * (BTRFS_MAX_LEVEL - 1) * 2;
rc->merging_rsv_size += rc->nodes_relocated * 2;
- spin_unlock(&root->fs_info->trans_lock);
+ mutex_unlock(&root->fs_info->reloc_mutex);
+
again:
if (!err) {
num_bytes = rc->merging_rsv_size;
@@ -2214,9 +2217,16 @@
int ret;
again:
root = rc->extent_root;
- spin_lock(&root->fs_info->trans_lock);
+
+ /*
+ * this serializes us with btrfs_record_root_in_transaction,
+ * we have to make sure nobody is in the middle of
+ * adding their roots to the list while we are
+ * doing this splice
+ */
+ mutex_lock(&root->fs_info->reloc_mutex);
list_splice_init(&rc->reloc_roots, &reloc_roots);
- spin_unlock(&root->fs_info->trans_lock);
+ mutex_unlock(&root->fs_info->reloc_mutex);
while (!list_empty(&reloc_roots)) {
found = 1;
@@ -3590,17 +3600,19 @@
static void set_reloc_control(struct reloc_control *rc)
{
struct btrfs_fs_info *fs_info = rc->extent_root->fs_info;
- spin_lock(&fs_info->trans_lock);
+
+ mutex_lock(&fs_info->reloc_mutex);
fs_info->reloc_ctl = rc;
- spin_unlock(&fs_info->trans_lock);
+ mutex_unlock(&fs_info->reloc_mutex);
}
static void unset_reloc_control(struct reloc_control *rc)
{
struct btrfs_fs_info *fs_info = rc->extent_root->fs_info;
- spin_lock(&fs_info->trans_lock);
+
+ mutex_lock(&fs_info->reloc_mutex);
fs_info->reloc_ctl = NULL;
- spin_unlock(&fs_info->trans_lock);
+ mutex_unlock(&fs_info->reloc_mutex);
}
static int check_extent_flags(u64 flags)
diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index df50fd1..a8d03d5 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -16,13 +16,7 @@
* Boston, MA 021110-1307, USA.
*/
-#include <linux/sched.h>
-#include <linux/pagemap.h>
-#include <linux/writeback.h>
#include <linux/blkdev.h>
-#include <linux/rbtree.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
#include "ctree.h"
#include "volumes.h"
#include "disk-io.h"
@@ -804,18 +798,12 @@
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
- goto out;
+ goto out_noplug;
- l = path->nodes[0];
- slot = path->slots[0];
- btrfs_item_key_to_cpu(l, &key, slot);
- if (key.objectid != logical) {
- ret = btrfs_previous_item(root, path, 0,
- BTRFS_EXTENT_ITEM_KEY);
- if (ret < 0)
- goto out;
- }
-
+ /*
+ * we might miss half an extent here, but that doesn't matter,
+ * as it's only the prefetch
+ */
while (1) {
l = path->nodes[0];
slot = path->slots[0];
@@ -824,7 +812,7 @@
if (ret == 0)
continue;
if (ret < 0)
- goto out;
+ goto out_noplug;
break;
}
@@ -906,15 +894,20 @@
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
goto out;
-
- l = path->nodes[0];
- slot = path->slots[0];
- btrfs_item_key_to_cpu(l, &key, slot);
- if (key.objectid != logical) {
+ if (ret > 0) {
ret = btrfs_previous_item(root, path, 0,
BTRFS_EXTENT_ITEM_KEY);
if (ret < 0)
goto out;
+ if (ret > 0) {
+ /* there's no smaller item, so stick with the
+ * larger one */
+ btrfs_release_path(path);
+ ret = btrfs_search_slot(NULL, root, &key,
+ path, 0, 0);
+ if (ret < 0)
+ goto out;
+ }
}
while (1) {
@@ -989,6 +982,7 @@
out:
blk_finish_plug(&plug);
+out_noplug:
btrfs_free_path(path);
return ret < 0 ? ret : 0;
}
@@ -1064,8 +1058,15 @@
while (1) {
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
- goto out;
- ret = 0;
+ break;
+ if (ret > 0) {
+ if (path->slots[0] >=
+ btrfs_header_nritems(path->nodes[0])) {
+ ret = btrfs_next_leaf(root, path);
+ if (ret)
+ break;
+ }
+ }
l = path->nodes[0];
slot = path->slots[0];
@@ -1075,7 +1076,7 @@
if (found_key.objectid != sdev->dev->devid)
break;
- if (btrfs_key_type(&key) != BTRFS_DEV_EXTENT_KEY)
+ if (btrfs_key_type(&found_key) != BTRFS_DEV_EXTENT_KEY)
break;
if (found_key.offset >= end)
@@ -1104,7 +1105,7 @@
cache = btrfs_lookup_block_group(fs_info, chunk_offset);
if (!cache) {
ret = -ENOENT;
- goto out;
+ break;
}
ret = scrub_chunk(sdev, chunk_tree, chunk_objectid,
chunk_offset, length);
@@ -1116,9 +1117,13 @@
btrfs_release_path(path);
}
-out:
btrfs_free_path(path);
- return ret;
+
+ /*
+ * ret can still be 1 from search_slot or next_leaf,
+ * that's not an error
+ */
+ return ret < 0 ? ret : 0;
}
static noinline_for_stack int scrub_supers(struct scrub_dev *sdev)
@@ -1155,8 +1160,12 @@
struct btrfs_fs_info *fs_info = root->fs_info;
mutex_lock(&fs_info->scrub_lock);
- if (fs_info->scrub_workers_refcnt == 0)
+ if (fs_info->scrub_workers_refcnt == 0) {
+ btrfs_init_workers(&fs_info->scrub_workers, "scrub",
+ fs_info->thread_pool_size, &fs_info->generic_worker);
+ fs_info->scrub_workers.idle_thresh = 4;
btrfs_start_workers(&fs_info->scrub_workers, 1);
+ }
++fs_info->scrub_workers_refcnt;
mutex_unlock(&fs_info->scrub_lock);
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 117e74e..15634d4 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -723,6 +723,12 @@
seq_puts(seq, ",clear_cache");
if (btrfs_test_opt(root, USER_SUBVOL_RM_ALLOWED))
seq_puts(seq, ",user_subvol_rm_allowed");
+ if (btrfs_test_opt(root, ENOSPC_DEBUG))
+ seq_puts(seq, ",enospc_debug");
+ if (btrfs_test_opt(root, AUTO_DEFRAG))
+ seq_puts(seq, ",autodefrag");
+ if (btrfs_test_opt(root, INODE_MAP_CACHE))
+ seq_puts(seq, ",inode_cache");
return 0;
}
@@ -825,7 +831,7 @@
} else {
char b[BDEVNAME_SIZE];
- s->s_flags = flags;
+ s->s_flags = flags | MS_NOSEC;
strlcpy(s->s_id, bdevname(bdev, b), sizeof(s->s_id));
error = btrfs_fill_super(s, fs_devices, data,
flags & MS_SILENT ? 1 : 0);
diff --git a/fs/btrfs/sysfs.c b/fs/btrfs/sysfs.c
index c3c223a..daac9ae 100644
--- a/fs/btrfs/sysfs.c
+++ b/fs/btrfs/sysfs.c
@@ -28,152 +28,6 @@
#include "disk-io.h"
#include "transaction.h"
-static ssize_t root_blocks_used_show(struct btrfs_root *root, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (unsigned long long)btrfs_root_used(&root->root_item));
-}
-
-static ssize_t root_block_limit_show(struct btrfs_root *root, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (unsigned long long)btrfs_root_limit(&root->root_item));
-}
-
-static ssize_t super_blocks_used_show(struct btrfs_fs_info *fs, char *buf)
-{
-
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (unsigned long long)btrfs_super_bytes_used(&fs->super_copy));
-}
-
-static ssize_t super_total_blocks_show(struct btrfs_fs_info *fs, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (unsigned long long)btrfs_super_total_bytes(&fs->super_copy));
-}
-
-static ssize_t super_blocksize_show(struct btrfs_fs_info *fs, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%llu\n",
- (unsigned long long)btrfs_super_sectorsize(&fs->super_copy));
-}
-
-/* this is for root attrs (subvols/snapshots) */
-struct btrfs_root_attr {
- struct attribute attr;
- ssize_t (*show)(struct btrfs_root *, char *);
- ssize_t (*store)(struct btrfs_root *, const char *, size_t);
-};
-
-#define ROOT_ATTR(name, mode, show, store) \
-static struct btrfs_root_attr btrfs_root_attr_##name = __ATTR(name, mode, \
- show, store)
-
-ROOT_ATTR(blocks_used, 0444, root_blocks_used_show, NULL);
-ROOT_ATTR(block_limit, 0644, root_block_limit_show, NULL);
-
-static struct attribute *btrfs_root_attrs[] = {
- &btrfs_root_attr_blocks_used.attr,
- &btrfs_root_attr_block_limit.attr,
- NULL,
-};
-
-/* this is for super attrs (actual full fs) */
-struct btrfs_super_attr {
- struct attribute attr;
- ssize_t (*show)(struct btrfs_fs_info *, char *);
- ssize_t (*store)(struct btrfs_fs_info *, const char *, size_t);
-};
-
-#define SUPER_ATTR(name, mode, show, store) \
-static struct btrfs_super_attr btrfs_super_attr_##name = __ATTR(name, mode, \
- show, store)
-
-SUPER_ATTR(blocks_used, 0444, super_blocks_used_show, NULL);
-SUPER_ATTR(total_blocks, 0444, super_total_blocks_show, NULL);
-SUPER_ATTR(blocksize, 0444, super_blocksize_show, NULL);
-
-static struct attribute *btrfs_super_attrs[] = {
- &btrfs_super_attr_blocks_used.attr,
- &btrfs_super_attr_total_blocks.attr,
- &btrfs_super_attr_blocksize.attr,
- NULL,
-};
-
-static ssize_t btrfs_super_attr_show(struct kobject *kobj,
- struct attribute *attr, char *buf)
-{
- struct btrfs_fs_info *fs = container_of(kobj, struct btrfs_fs_info,
- super_kobj);
- struct btrfs_super_attr *a = container_of(attr,
- struct btrfs_super_attr,
- attr);
-
- return a->show ? a->show(fs, buf) : 0;
-}
-
-static ssize_t btrfs_super_attr_store(struct kobject *kobj,
- struct attribute *attr,
- const char *buf, size_t len)
-{
- struct btrfs_fs_info *fs = container_of(kobj, struct btrfs_fs_info,
- super_kobj);
- struct btrfs_super_attr *a = container_of(attr,
- struct btrfs_super_attr,
- attr);
-
- return a->store ? a->store(fs, buf, len) : 0;
-}
-
-static ssize_t btrfs_root_attr_show(struct kobject *kobj,
- struct attribute *attr, char *buf)
-{
- struct btrfs_root *root = container_of(kobj, struct btrfs_root,
- root_kobj);
- struct btrfs_root_attr *a = container_of(attr,
- struct btrfs_root_attr,
- attr);
-
- return a->show ? a->show(root, buf) : 0;
-}
-
-static ssize_t btrfs_root_attr_store(struct kobject *kobj,
- struct attribute *attr,
- const char *buf, size_t len)
-{
- struct btrfs_root *root = container_of(kobj, struct btrfs_root,
- root_kobj);
- struct btrfs_root_attr *a = container_of(attr,
- struct btrfs_root_attr,
- attr);
- return a->store ? a->store(root, buf, len) : 0;
-}
-
-static void btrfs_super_release(struct kobject *kobj)
-{
- struct btrfs_fs_info *fs = container_of(kobj, struct btrfs_fs_info,
- super_kobj);
- complete(&fs->kobj_unregister);
-}
-
-static void btrfs_root_release(struct kobject *kobj)
-{
- struct btrfs_root *root = container_of(kobj, struct btrfs_root,
- root_kobj);
- complete(&root->kobj_unregister);
-}
-
-static const struct sysfs_ops btrfs_super_attr_ops = {
- .show = btrfs_super_attr_show,
- .store = btrfs_super_attr_store,
-};
-
-static const struct sysfs_ops btrfs_root_attr_ops = {
- .show = btrfs_root_attr_show,
- .store = btrfs_root_attr_store,
-};
-
/* /sys/fs/btrfs/ entry */
static struct kset *btrfs_kset;
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index dd71966..51dcec8 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -126,28 +126,85 @@
* to make sure the old root from before we joined the transaction is deleted
* when the transaction commits
*/
-int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
+static int record_root_in_trans(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
if (root->ref_cows && root->last_trans < trans->transid) {
WARN_ON(root == root->fs_info->extent_root);
WARN_ON(root->commit_root != root->node);
+ /*
+ * see below for in_trans_setup usage rules
+ * we have the reloc mutex held now, so there
+ * is only one writer in this function
+ */
+ root->in_trans_setup = 1;
+
+ /* make sure readers find in_trans_setup before
+ * they find our root->last_trans update
+ */
+ smp_wmb();
+
spin_lock(&root->fs_info->fs_roots_radix_lock);
if (root->last_trans == trans->transid) {
spin_unlock(&root->fs_info->fs_roots_radix_lock);
return 0;
}
- root->last_trans = trans->transid;
radix_tree_tag_set(&root->fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid,
BTRFS_ROOT_TRANS_TAG);
spin_unlock(&root->fs_info->fs_roots_radix_lock);
+ root->last_trans = trans->transid;
+
+ /* this is pretty tricky. We don't want to
+ * take the relocation lock in btrfs_record_root_in_trans
+ * unless we're really doing the first setup for this root in
+ * this transaction.
+ *
+ * Normally we'd use root->last_trans as a flag to decide
+ * if we want to take the expensive mutex.
+ *
+ * But, we have to set root->last_trans before we
+ * init the relocation root, otherwise, we trip over warnings
+ * in ctree.c. The solution used here is to flag ourselves
+ * with root->in_trans_setup. When this is 1, we're still
+ * fixing up the reloc trees and everyone must wait.
+ *
+ * When this is zero, they can trust root->last_trans and fly
+ * through btrfs_record_root_in_trans without having to take the
+ * lock. smp_wmb() makes sure that all the writes above are
+ * done before we pop in the zero below
+ */
btrfs_init_reloc_root(trans, root);
+ smp_wmb();
+ root->in_trans_setup = 0;
}
return 0;
}
+
+int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root)
+{
+ if (!root->ref_cows)
+ return 0;
+
+ /*
+ * see record_root_in_trans for comments about in_trans_setup usage
+ * and barriers
+ */
+ smp_rmb();
+ if (root->last_trans == trans->transid &&
+ !root->in_trans_setup)
+ return 0;
+
+ mutex_lock(&root->fs_info->reloc_mutex);
+ record_root_in_trans(trans, root);
+ mutex_unlock(&root->fs_info->reloc_mutex);
+
+ return 0;
+}
+
/* wait for commit against the current transaction to become unblocked
* when this is done, it is safe to start a new transaction, but the current
* transaction might not be fully on disk.
@@ -349,7 +406,7 @@
list) {
if (t->in_commit) {
if (t->commit_done)
- goto out;
+ break;
cur_trans = t;
atomic_inc(&cur_trans->use_count);
break;
@@ -882,7 +939,7 @@
parent = dget_parent(dentry);
parent_inode = parent->d_inode;
parent_root = BTRFS_I(parent_inode)->root;
- btrfs_record_root_in_trans(trans, parent_root);
+ record_root_in_trans(trans, parent_root);
/*
* insert the directory item
@@ -900,7 +957,16 @@
ret = btrfs_update_inode(trans, parent_root, parent_inode);
BUG_ON(ret);
- btrfs_record_root_in_trans(trans, root);
+ /*
+ * pull in the delayed directory update
+ * and the delayed inode item
+ * otherwise we corrupt the FS during
+ * snapshot
+ */
+ ret = btrfs_run_delayed_items(trans, root);
+ BUG_ON(ret);
+
+ record_root_in_trans(trans, root);
btrfs_set_root_last_snapshot(&root->root_item, trans->transid);
memcpy(new_root_item, &root->root_item, sizeof(*new_root_item));
btrfs_check_and_init_root_item(new_root_item);
@@ -961,14 +1027,6 @@
int ret;
list_for_each_entry(pending, head, list) {
- /*
- * We must deal with the delayed items before creating
- * snapshots, or we will create a snapthot with inconsistent
- * information.
- */
- ret = btrfs_run_delayed_items(trans, fs_info->fs_root);
- BUG_ON(ret);
-
ret = create_pending_snapshot(trans, fs_info, pending);
BUG_ON(ret);
}
@@ -1118,8 +1176,11 @@
wait_current_trans_commit_start_and_unblock(root, cur_trans);
else
wait_current_trans_commit_start(root, cur_trans);
- put_transaction(cur_trans);
+ if (current->journal_info == trans)
+ current->journal_info = NULL;
+
+ put_transaction(cur_trans);
return 0;
}
@@ -1238,21 +1299,42 @@
schedule_timeout(1);
finish_wait(&cur_trans->writer_wait, &wait);
- spin_lock(&root->fs_info->trans_lock);
- root->fs_info->trans_no_join = 1;
- spin_unlock(&root->fs_info->trans_lock);
} while (atomic_read(&cur_trans->num_writers) > 1 ||
(should_grow && cur_trans->num_joined != joined));
- ret = create_pending_snapshots(trans, root->fs_info);
- BUG_ON(ret);
+ /*
+ * Ok now we need to make sure to block out any other joins while we
+ * commit the transaction. We could have started a join before setting
+ * no_join so make sure to wait for num_writers to == 1 again.
+ */
+ spin_lock(&root->fs_info->trans_lock);
+ root->fs_info->trans_no_join = 1;
+ spin_unlock(&root->fs_info->trans_lock);
+ wait_event(cur_trans->writer_wait,
+ atomic_read(&cur_trans->num_writers) == 1);
+
+ /*
+ * the reloc mutex makes sure that we stop
+ * the balancing code from coming in and moving
+ * extents around in the middle of the commit
+ */
+ mutex_lock(&root->fs_info->reloc_mutex);
ret = btrfs_run_delayed_items(trans, root);
BUG_ON(ret);
+ ret = create_pending_snapshots(trans, root->fs_info);
+ BUG_ON(ret);
+
ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
BUG_ON(ret);
+ /*
+ * make sure none of the code above managed to slip in a
+ * delayed item
+ */
+ btrfs_assert_delayed_root_empty(root);
+
WARN_ON(cur_trans != trans->transaction);
btrfs_scrub_pause(root);
@@ -1309,6 +1391,7 @@
root->fs_info->running_transaction = NULL;
root->fs_info->trans_no_join = 0;
spin_unlock(&root->fs_info->trans_lock);
+ mutex_unlock(&root->fs_info->reloc_mutex);
wake_up(&root->fs_info->transaction_wait);
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 592396c..4ce8a9f 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3177,7 +3177,7 @@
tmp_key.offset = (u64)-1;
wc.replay_dest = btrfs_read_fs_root_no_name(fs_info, &tmp_key);
- BUG_ON(!wc.replay_dest);
+ BUG_ON(IS_ERR_OR_NULL(wc.replay_dest));
wc.replay_dest->log_root = log;
btrfs_record_root_in_trans(trans, wc.replay_dest);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index da541df..19450bc 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -689,12 +689,8 @@
transid = btrfs_super_generation(disk_super);
if (disk_super->label[0])
printk(KERN_INFO "device label %s ", disk_super->label);
- else {
- /* FIXME, make a readl uuid parser */
- printk(KERN_INFO "device fsid %llx-%llx ",
- *(unsigned long long *)disk_super->fsid,
- *(unsigned long long *)(disk_super->fsid + 8));
- }
+ else
+ printk(KERN_INFO "device fsid %pU ", disk_super->fsid);
printk(KERN_CONT "devid %llu transid %llu %s\n",
(unsigned long long)devid, (unsigned long long)transid, path);
ret = device_list_add(path, disk_super, devid, fs_devices_ret);
@@ -2102,7 +2098,8 @@
chunk_root->root_key.objectid,
found_key.objectid,
found_key.offset);
- BUG_ON(ret && ret != -ENOSPC);
+ if (ret && ret != -ENOSPC)
+ goto error;
key.offset = found_key.offset - 1;
}
ret = 0;
diff --git a/fs/buffer.c b/fs/buffer.c
index 49c9aad..1a80b04 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1902,10 +1902,8 @@
if (!buffer_uptodate(*wait_bh))
err = -EIO;
}
- if (unlikely(err)) {
+ if (unlikely(err))
page_zero_new_buffers(page, from, to);
- ClearPageUptodate(page);
- }
return err;
}
EXPORT_SYMBOL(__block_write_begin);
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 33da49d..5a3953d 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -453,7 +453,7 @@
int err;
struct inode *inode = page->mapping->host;
BUG_ON(!inode);
- igrab(inode);
+ ihold(inode);
err = writepage_nounlock(page, wbc);
unlock_page(page);
iput(inode);
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 1f72b00..f605753 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -2940,14 +2940,12 @@
while (!list_empty(&mdsc->cap_dirty)) {
ci = list_first_entry(&mdsc->cap_dirty, struct ceph_inode_info,
i_dirty_item);
- inode = igrab(&ci->vfs_inode);
+ inode = &ci->vfs_inode;
+ ihold(inode);
dout("flush_dirty_caps %p\n", inode);
spin_unlock(&mdsc->cap_dirty_lock);
- if (inode) {
- ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_FLUSH,
- NULL);
- iput(inode);
- }
+ ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_FLUSH, NULL);
+ iput(inode);
spin_lock(&mdsc->cap_dirty_lock);
}
spin_unlock(&mdsc->cap_dirty_lock);
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 33729e8..ef8f08c 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -308,7 +308,8 @@
req = ceph_mdsc_create_request(mdsc, op, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_dentry = dget(filp->f_dentry);
/* hints to request -> mds selection code */
req->r_direct_mode = USE_AUTH_MDS;
@@ -787,10 +788,12 @@
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
err = ceph_mdsc_do_request(mdsc, dir, req);
- if (err)
+ if (err) {
d_drop(dentry);
- else if (!req->r_reply_info.head->is_dentry)
- d_instantiate(dentry, igrab(old_dentry->d_inode));
+ } else if (!req->r_reply_info.head->is_dentry) {
+ ihold(old_dentry->d_inode);
+ d_instantiate(dentry, old_dentry->d_inode);
+ }
ceph_mdsc_put_request(req);
return err;
}
diff --git a/fs/ceph/export.c b/fs/ceph/export.c
index a610d3d..f67b687 100644
--- a/fs/ceph/export.c
+++ b/fs/ceph/export.c
@@ -109,7 +109,7 @@
err = ceph_mdsc_do_request(mdsc, NULL, req);
inode = req->r_target_inode;
if (inode)
- igrab(inode);
+ ihold(inode);
ceph_mdsc_put_request(req);
if (!inode)
return ERR_PTR(-ESTALE);
@@ -167,7 +167,7 @@
err = ceph_mdsc_do_request(mdsc, NULL, req);
inode = req->r_target_inode;
if (inode)
- igrab(inode);
+ ihold(inode);
ceph_mdsc_put_request(req);
if (!inode)
return ERR_PTR(err ? err : -ESTALE);
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index 203252d..4698a5c 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -191,7 +191,8 @@
err = PTR_ERR(req);
goto out;
}
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_num_caps = 1;
err = ceph_mdsc_do_request(mdsc, parent_inode, req);
if (!err)
@@ -282,14 +283,13 @@
static int striped_read(struct inode *inode,
u64 off, u64 len,
struct page **pages, int num_pages,
- int *checkeof, bool align_to_pages,
+ int *checkeof, bool o_direct,
unsigned long buf_align)
{
struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
struct ceph_inode_info *ci = ceph_inode(inode);
u64 pos, this_len;
int io_align, page_align;
- int page_off = off & ~PAGE_CACHE_MASK; /* first byte's offset in page */
int left, pages_left;
int read;
struct page **page_pos;
@@ -307,7 +307,7 @@
io_align = off & ~PAGE_MASK;
more:
- if (align_to_pages)
+ if (o_direct)
page_align = (pos - io_align + buf_align) & ~PAGE_MASK;
else
page_align = pos & ~PAGE_MASK;
@@ -317,20 +317,19 @@
ci->i_truncate_seq,
ci->i_truncate_size,
page_pos, pages_left, page_align);
- hit_stripe = this_len < left;
- was_short = ret >= 0 && ret < this_len;
if (ret == -ENOENT)
ret = 0;
+ hit_stripe = this_len < left;
+ was_short = ret >= 0 && ret < this_len;
dout("striped_read %llu~%u (read %u) got %d%s%s\n", pos, left, read,
ret, hit_stripe ? " HITSTRIPE" : "", was_short ? " SHORT" : "");
if (ret > 0) {
- int didpages =
- ((pos & ~PAGE_CACHE_MASK) + ret) >> PAGE_CACHE_SHIFT;
+ int didpages = (page_align + ret) >> PAGE_CACHE_SHIFT;
if (read < pos - off) {
dout(" zero gap %llu to %llu\n", off + read, pos);
- ceph_zero_page_vector_range(page_off + read,
+ ceph_zero_page_vector_range(page_align + read,
pos - off - read, pages);
}
pos += ret;
@@ -345,20 +344,22 @@
}
if (was_short) {
- /* was original extent fully inside i_size? */
- if (pos + left <= inode->i_size) {
- dout("zero tail\n");
- ceph_zero_page_vector_range(page_off + read, len - read,
- pages);
- read = len;
- goto out;
- }
+ /* did we bounce off eof? */
+ if (pos + left > inode->i_size)
+ *checkeof = 1;
- /* check i_size */
- *checkeof = 1;
+ /* zero trailing bytes (inside i_size) */
+ if (left > 0 && pos < inode->i_size) {
+ if (pos + left > inode->i_size)
+ left = inode->i_size - pos;
+
+ dout("zero tail %d\n", left);
+ ceph_zero_page_vector_range(page_align + read, left,
+ pages);
+ read += left;
+ }
}
-out:
if (ret >= 0)
ret = read;
dout("striped_read returns %d\n", ret);
@@ -475,9 +476,6 @@
else
pos = *offset;
- io_align = pos & ~PAGE_MASK;
- buf_align = (unsigned long)data & ~PAGE_MASK;
-
ret = filemap_write_and_wait_range(inode->i_mapping, pos, pos + left);
if (ret < 0)
return ret;
@@ -501,6 +499,8 @@
* boundary. this isn't atomic, unfortunately. :(
*/
more:
+ io_align = pos & ~PAGE_MASK;
+ buf_align = (unsigned long)data & ~PAGE_MASK;
len = left;
if (file->f_flags & O_DIRECT) {
/* write from beginning of first page, regardless of
@@ -590,6 +590,7 @@
pos += len;
written += len;
left -= len;
+ data += written;
if (left)
goto more;
@@ -658,7 +659,7 @@
/* hit EOF or hole? */
if (statret == 0 && *ppos < inode->i_size) {
- dout("aio_read sync_read hit hole, reading more\n");
+ dout("aio_read sync_read hit hole, ppos %lld < size %lld, reading more\n", *ppos, inode->i_size);
read += ret;
base += ret;
len -= ret;
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 70b6a48..d8858e9 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1101,10 +1101,10 @@
goto done;
}
req->r_dentry = dn; /* may have spliced */
- igrab(in);
+ ihold(in);
} else if (ceph_ino(in) == vino.ino &&
ceph_snap(in) == vino.snap) {
- igrab(in);
+ ihold(in);
} else {
dout(" %p links to %p %llx.%llx, not %llx.%llx\n",
dn, in, ceph_ino(in), ceph_snap(in),
@@ -1144,7 +1144,7 @@
goto done;
}
req->r_dentry = dn; /* may have spliced */
- igrab(in);
+ ihold(in);
rinfo->head->is_dentry = 1; /* fool notrace handlers */
}
@@ -1328,7 +1328,7 @@
if (queue_work(ceph_inode_to_client(inode)->wb_wq,
&ceph_inode(inode)->i_wb_work)) {
dout("ceph_queue_writeback %p\n", inode);
- igrab(inode);
+ ihold(inode);
} else {
dout("ceph_queue_writeback %p failed\n", inode);
}
@@ -1353,7 +1353,7 @@
if (queue_work(ceph_inode_to_client(inode)->pg_inv_wq,
&ceph_inode(inode)->i_pg_inv_work)) {
dout("ceph_queue_invalidate %p\n", inode);
- igrab(inode);
+ ihold(inode);
} else {
dout("ceph_queue_invalidate %p failed\n", inode);
}
@@ -1477,7 +1477,7 @@
if (queue_work(ceph_sb_to_client(inode->i_sb)->trunc_wq,
&ci->i_vmtruncate_work)) {
dout("ceph_queue_vmtruncate %p\n", inode);
- igrab(inode);
+ ihold(inode);
} else {
dout("ceph_queue_vmtruncate %p failed, pending=%d\n",
inode, ci->i_truncate_pending);
@@ -1738,7 +1738,8 @@
__mark_inode_dirty(inode, inode_dirty_flags);
if (mask) {
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_inode_drop = release;
req->r_args.setattr.mask = cpu_to_le32(mask);
req->r_num_caps = 1;
@@ -1779,7 +1780,8 @@
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_GETATTR, USE_ANY_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_num_caps = 1;
req->r_args.getattr.mask = cpu_to_le32(mask);
err = ceph_mdsc_do_request(mdsc, NULL, req);
diff --git a/fs/ceph/ioctl.c b/fs/ceph/ioctl.c
index 8888c9ba..ef0b5f4 100644
--- a/fs/ceph/ioctl.c
+++ b/fs/ceph/ioctl.c
@@ -73,7 +73,8 @@
USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_inode_drop = CEPH_CAP_FILE_SHARED | CEPH_CAP_FILE_EXCL;
req->r_args.setlayout.layout.fl_stripe_unit =
@@ -135,7 +136,8 @@
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_args.setlayout.layout.fl_stripe_unit =
cpu_to_le32(l.stripe_unit);
diff --git a/fs/ceph/locks.c b/fs/ceph/locks.c
index 476b329..80576d05 100644
--- a/fs/ceph/locks.c
+++ b/fs/ceph/locks.c
@@ -23,7 +23,8 @@
req = ceph_mdsc_create_request(mdsc, operation, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
/* mds requires start and length rather than start and end */
if (LLONG_MAX == fl->fl_end)
@@ -32,11 +33,10 @@
length = fl->fl_end - fl->fl_start + 1;
dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
- "length: %llu, wait: %d, type`: %d", (int)lock_type,
+ "length: %llu, wait: %d, type: %d", (int)lock_type,
(int)operation, (u64)fl->fl_pid, fl->fl_start,
length, wait, fl->fl_type);
-
req->r_args.filelock_change.rule = lock_type;
req->r_args.filelock_change.type = cmd;
req->r_args.filelock_change.pid = cpu_to_le64((u64)fl->fl_pid);
@@ -70,7 +70,7 @@
}
ceph_mdsc_put_request(req);
dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
- "length: %llu, wait: %d, type`: %d, err code %d", (int)lock_type,
+ "length: %llu, wait: %d, type: %d, err code %d", (int)lock_type,
(int)operation, (u64)fl->fl_pid, fl->fl_start,
length, wait, fl->fl_type, err);
return err;
@@ -109,16 +109,20 @@
dout("mds locked, locking locally");
err = posix_lock_file(file, fl, NULL);
if (err && (CEPH_MDS_OP_SETFILELOCK == op)) {
- /* undo! This should only happen if the kernel detects
- * local deadlock. */
+ /* undo! This should only happen if
+ * the kernel detects local
+ * deadlock. */
ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
CEPH_LOCK_UNLOCK, 0, fl);
- dout("got %d on posix_lock_file, undid lock", err);
+ dout("got %d on posix_lock_file, undid lock",
+ err);
}
}
- } else {
- dout("mds returned error code %d", err);
+ } else if (err == -ERESTARTSYS) {
+ dout("undoing lock\n");
+ ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
+ CEPH_LOCK_UNLOCK, 0, fl);
}
return err;
}
@@ -155,8 +159,11 @@
file, CEPH_LOCK_UNLOCK, 0, fl);
dout("got %d on flock_lock_file_wait, undid lock", err);
}
- } else {
- dout("mds error code %d", err);
+ } else if (err == -ERESTARTSYS) {
+ dout("undoing lock\n");
+ ceph_lock_message(CEPH_LOCK_FLOCK,
+ CEPH_MDS_OP_SETFILELOCK,
+ file, CEPH_LOCK_UNLOCK, 0, fl);
}
return err;
}
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 79743d1..0c1d917 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -1438,12 +1438,15 @@
struct dentry *temp;
char *path;
int len, pos;
+ unsigned seq;
if (dentry == NULL)
return ERR_PTR(-EINVAL);
retry:
len = 0;
+ seq = read_seqbegin(&rename_lock);
+ rcu_read_lock();
for (temp = dentry; !IS_ROOT(temp);) {
struct inode *inode = temp->d_inode;
if (inode && ceph_snap(inode) == CEPH_SNAPDIR)
@@ -1455,10 +1458,12 @@
len += 1 + temp->d_name.len;
temp = temp->d_parent;
if (temp == NULL) {
+ rcu_read_unlock();
pr_err("build_path corrupt dentry %p\n", dentry);
return ERR_PTR(-EINVAL);
}
}
+ rcu_read_unlock();
if (len)
len--; /* no leading '/' */
@@ -1467,9 +1472,12 @@
return ERR_PTR(-ENOMEM);
pos = len;
path[pos] = 0; /* trailing null */
+ rcu_read_lock();
for (temp = dentry; !IS_ROOT(temp) && pos != 0; ) {
- struct inode *inode = temp->d_inode;
+ struct inode *inode;
+ spin_lock(&temp->d_lock);
+ inode = temp->d_inode;
if (inode && ceph_snap(inode) == CEPH_SNAPDIR) {
dout("build_path path+%d: %p SNAPDIR\n",
pos, temp);
@@ -1478,21 +1486,26 @@
break;
} else {
pos -= temp->d_name.len;
- if (pos < 0)
+ if (pos < 0) {
+ spin_unlock(&temp->d_lock);
break;
+ }
strncpy(path + pos, temp->d_name.name,
temp->d_name.len);
}
+ spin_unlock(&temp->d_lock);
if (pos)
path[--pos] = '/';
temp = temp->d_parent;
if (temp == NULL) {
+ rcu_read_unlock();
pr_err("build_path corrupt dentry\n");
kfree(path);
return ERR_PTR(-EINVAL);
}
}
- if (pos != 0) {
+ rcu_read_unlock();
+ if (pos != 0 || read_seqretry(&rename_lock, seq)) {
pr_err("build_path did not end path lookup where "
"expected, namelen is %d, pos is %d\n", len, pos);
/* presumably this is only possible if racing with a
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 24067d6..54b14de 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -722,7 +722,7 @@
ci = list_first_entry(&mdsc->snap_flush_list,
struct ceph_inode_info, i_snap_flush_item);
inode = &ci->vfs_inode;
- igrab(inode);
+ ihold(inode);
spin_unlock(&mdsc->snap_flush_lock);
spin_lock(&inode->i_lock);
__ceph_flush_snaps(ci, &session, 0);
diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
index f2b6286..f42d730 100644
--- a/fs/ceph/xattr.c
+++ b/fs/ceph/xattr.c
@@ -665,7 +665,8 @@
err = PTR_ERR(req);
goto out;
}
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_inode_drop = CEPH_CAP_XATTR_SHARED;
req->r_num_caps = 1;
req->r_args.setxattr.flags = cpu_to_le32(flags);
@@ -795,7 +796,8 @@
USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
- req->r_inode = igrab(inode);
+ req->r_inode = inode;
+ ihold(inode);
req->r_inode_drop = CEPH_CAP_XATTR_SHARED;
req->r_num_caps = 1;
req->r_path2 = kstrdup(name, GFP_NOFS);
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index 1cd4c3a..f66cc16 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -7,6 +7,7 @@
select CRYPTO_MD5
select CRYPTO_HMAC
select CRYPTO_ARC4
+ select CRYPTO_ECB
select CRYPTO_DES
help
This is the client VFS module for the Common Internet File System
@@ -148,13 +149,13 @@
config CIFS_ACL
bool "Provide CIFS ACL support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && CIFS_XATTR
+ depends on EXPERIMENTAL && CIFS_XATTR && KEYS
help
Allows to fetch CIFS/NTFS ACL from the server. The DACL blob
is handed over to the application/caller.
config CIFS_NFSD_EXPORT
bool "Allow nfsd to export CIFS file system (EXPERIMENTAL)"
- depends on CIFS && EXPERIMENTAL
+ depends on CIFS && EXPERIMENTAL && BROKEN
help
Allows NFS server to export a CIFS mounted share (nfsd over cifs)
diff --git a/fs/cifs/cache.c b/fs/cifs/cache.c
index dd8584d..545509c 100644
--- a/fs/cifs/cache.c
+++ b/fs/cifs/cache.c
@@ -92,7 +92,7 @@
break;
default:
- cERROR(1, "CIFS: Unknown network family '%d'", sa->sa_family);
+ cERROR(1, "Unknown network family '%d'", sa->sa_family);
key_len = 0;
break;
}
@@ -152,7 +152,7 @@
sharename = extract_sharename(tcon->treeName);
if (IS_ERR(sharename)) {
- cFYI(1, "CIFS: couldn't extract sharename\n");
+ cFYI(1, "%s: couldn't extract sharename\n", __func__);
sharename = NULL;
return 0;
}
@@ -302,7 +302,7 @@
pagevec_init(&pvec, 0);
first = 0;
- cFYI(1, "cifs inode 0x%p now uncached", cifsi);
+ cFYI(1, "%s: cifs inode 0x%p now uncached", __func__, cifsi);
for (;;) {
nr_pages = pagevec_lookup(&pvec,
diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index ffb1459..7260e11 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -42,6 +42,7 @@
#define CIFS_MOUNT_MULTIUSER 0x20000 /* multiuser mount */
#define CIFS_MOUNT_STRICT_IO 0x40000 /* strict cache mode */
#define CIFS_MOUNT_RWPIDFORWARD 0x80000 /* use pid forwarding for rw */
+#define CIFS_MOUNT_POSIXACL 0x100000 /* mirror of MS_POSIXACL in mnt_cifs_flags */
struct cifs_sb_info {
struct rb_root tlink_tree;
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index dfbd9f1..5a0ee7f 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -184,7 +184,7 @@
if (cifs_pdu == NULL || server == NULL)
return -EINVAL;
- if (cifs_pdu->Command == SMB_COM_NEGOTIATE)
+ if (!server->session_estab)
return 0;
if (cifs_pdu->Command == SMB_COM_LOCKING_ANDX) {
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 989442d..bc4b12c 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -35,6 +35,7 @@
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
+#include <linux/namei.h>
#include <net/ipv6.h>
#include "cifsfs.h"
#include "cifspdu.h"
@@ -104,8 +105,7 @@
}
static int
-cifs_read_super(struct super_block *sb, struct smb_vol *volume_info,
- const char *devname, int silent)
+cifs_read_super(struct super_block *sb)
{
struct inode *inode;
struct cifs_sb_info *cifs_sb;
@@ -113,22 +113,16 @@
cifs_sb = CIFS_SB(sb);
- spin_lock_init(&cifs_sb->tlink_tree_lock);
- cifs_sb->tlink_tree = RB_ROOT;
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIXACL)
+ sb->s_flags |= MS_POSIXACL;
- rc = bdi_setup_and_register(&cifs_sb->bdi, "cifs", BDI_CAP_MAP_COPY);
- if (rc)
- return rc;
+ if (cifs_sb_master_tcon(cifs_sb)->ses->capabilities & CAP_LARGE_FILES)
+ sb->s_maxbytes = MAX_LFS_FILESIZE;
+ else
+ sb->s_maxbytes = MAX_NON_LFS;
- cifs_sb->bdi.ra_pages = default_backing_dev_info.ra_pages;
-
- rc = cifs_mount(sb, cifs_sb, volume_info, devname);
-
- if (rc) {
- if (!silent)
- cERROR(1, "cifs_mount failed w/return code = %d", rc);
- goto out_mount_failed;
- }
+ /* BB FIXME fix time_gran to be larger for LANMAN sessions */
+ sb->s_time_gran = 100;
sb->s_magic = CIFS_MAGIC_NUMBER;
sb->s_op = &cifs_super_ops;
@@ -170,37 +164,14 @@
if (inode)
iput(inode);
- cifs_umount(sb, cifs_sb);
-
-out_mount_failed:
- bdi_destroy(&cifs_sb->bdi);
return rc;
}
-static void
-cifs_put_super(struct super_block *sb)
+static void cifs_kill_sb(struct super_block *sb)
{
- int rc = 0;
- struct cifs_sb_info *cifs_sb;
-
- cFYI(1, "In cifs_put_super");
- cifs_sb = CIFS_SB(sb);
- if (cifs_sb == NULL) {
- cFYI(1, "Empty cifs superblock info passed to unmount");
- return;
- }
-
- rc = cifs_umount(sb, cifs_sb);
- if (rc)
- cERROR(1, "cifs_umount failed with return code %d", rc);
- if (cifs_sb->mountdata) {
- kfree(cifs_sb->mountdata);
- cifs_sb->mountdata = NULL;
- }
-
- unload_nls(cifs_sb->local_nls);
- bdi_destroy(&cifs_sb->bdi);
- kfree(cifs_sb);
+ struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+ kill_anon_super(sb);
+ cifs_umount(cifs_sb);
}
static int
@@ -257,9 +228,6 @@
{
struct cifs_sb_info *cifs_sb;
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
-
cifs_sb = CIFS_SB(inode->i_sb);
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) {
@@ -352,6 +320,37 @@
}
}
+static void
+cifs_show_security(struct seq_file *s, struct TCP_Server_Info *server)
+{
+ seq_printf(s, ",sec=");
+
+ switch (server->secType) {
+ case LANMAN:
+ seq_printf(s, "lanman");
+ break;
+ case NTLMv2:
+ seq_printf(s, "ntlmv2");
+ break;
+ case NTLM:
+ seq_printf(s, "ntlm");
+ break;
+ case Kerberos:
+ seq_printf(s, "krb5");
+ break;
+ case RawNTLMSSP:
+ seq_printf(s, "ntlmssp");
+ break;
+ default:
+ /* shouldn't ever happen */
+ seq_printf(s, "unknown");
+ break;
+ }
+
+ if (server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ seq_printf(s, "i");
+}
+
/*
* cifs_show_options() is for displaying mount options in /proc/mounts.
* Not all settable options are displayed but most of the important
@@ -365,6 +364,8 @@
struct sockaddr *srcaddr;
srcaddr = (struct sockaddr *)&tcon->ses->server->srcaddr;
+ cifs_show_security(s, tcon->ses->server);
+
seq_printf(s, ",unc=%s", tcon->treeName);
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER)
@@ -518,7 +519,6 @@
}
static const struct super_operations cifs_super_ops = {
- .put_super = cifs_put_super,
.statfs = cifs_statfs,
.alloc_inode = cifs_alloc_inode,
.destroy_inode = cifs_destroy_inode,
@@ -543,91 +543,55 @@
static struct dentry *
cifs_get_root(struct smb_vol *vol, struct super_block *sb)
{
- int xid, rc;
- struct inode *inode;
- struct qstr name;
- struct dentry *dparent = NULL, *dchild = NULL, *alias;
+ struct dentry *dentry;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- unsigned int i, full_len, len;
- char *full_path = NULL, *pstart;
+ char *full_path = NULL;
+ char *s, *p;
char sep;
+ int xid;
full_path = cifs_build_path_to_root(vol, cifs_sb,
cifs_sb_master_tcon(cifs_sb));
if (full_path == NULL)
- return NULL;
+ return ERR_PTR(-ENOMEM);
cFYI(1, "Get root dentry for %s", full_path);
xid = GetXid();
sep = CIFS_DIR_SEP(cifs_sb);
- dparent = dget(sb->s_root);
- full_len = strlen(full_path);
- full_path[full_len] = sep;
- pstart = full_path + 1;
+ dentry = dget(sb->s_root);
+ p = s = full_path;
- for (i = 1, len = 0; i <= full_len; i++) {
- if (full_path[i] != sep || !len) {
- len++;
- continue;
- }
+ do {
+ struct inode *dir = dentry->d_inode;
+ struct dentry *child;
- full_path[i] = 0;
- cFYI(1, "get dentry for %s", pstart);
+ /* skip separators */
+ while (*s == sep)
+ s++;
+ if (!*s)
+ break;
+ p = s++;
+ /* next separator */
+ while (*s && *s != sep)
+ s++;
- name.name = pstart;
- name.len = len;
- name.hash = full_name_hash(pstart, len);
- dchild = d_lookup(dparent, &name);
- if (dchild == NULL) {
- cFYI(1, "not exists");
- dchild = d_alloc(dparent, &name);
- if (dchild == NULL) {
- dput(dparent);
- dparent = NULL;
- goto out;
- }
- }
-
- cFYI(1, "get inode");
- if (dchild->d_inode == NULL) {
- cFYI(1, "not exists");
- inode = NULL;
- if (cifs_sb_master_tcon(CIFS_SB(sb))->unix_ext)
- rc = cifs_get_inode_info_unix(&inode, full_path,
- sb, xid);
- else
- rc = cifs_get_inode_info(&inode, full_path,
- NULL, sb, xid, NULL);
- if (rc) {
- dput(dchild);
- dput(dparent);
- dparent = NULL;
- goto out;
- }
- alias = d_materialise_unique(dchild, inode);
- if (alias != NULL) {
- dput(dchild);
- if (IS_ERR(alias)) {
- dput(dparent);
- dparent = NULL;
- goto out;
- }
- dchild = alias;
- }
- }
- cFYI(1, "parent %p, child %p", dparent, dchild);
-
- dput(dparent);
- dparent = dchild;
- len = 0;
- pstart = full_path + i + 1;
- full_path[i] = sep;
- }
-out:
+ mutex_lock(&dir->i_mutex);
+ child = lookup_one_len(p, dentry, s - p);
+ mutex_unlock(&dir->i_mutex);
+ dput(dentry);
+ dentry = child;
+ } while (!IS_ERR(dentry));
_FreeXid(xid);
kfree(full_path);
- return dparent;
+ return dentry;
+}
+
+static int cifs_set_super(struct super_block *sb, void *data)
+{
+ struct cifs_mnt_data *mnt_data = data;
+ sb->s_fs_info = mnt_data->cifs_sb;
+ return set_anon_super(sb, NULL);
}
static struct dentry *
@@ -643,82 +607,80 @@
cFYI(1, "Devname: %s flags: %d ", dev_name, flags);
- rc = cifs_setup_volume_info(&volume_info, (char *)data, dev_name);
- if (rc)
- return ERR_PTR(rc);
+ volume_info = cifs_get_volume_info((char *)data, dev_name);
+ if (IS_ERR(volume_info))
+ return ERR_CAST(volume_info);
cifs_sb = kzalloc(sizeof(struct cifs_sb_info), GFP_KERNEL);
if (cifs_sb == NULL) {
root = ERR_PTR(-ENOMEM);
- goto out;
+ goto out_nls;
+ }
+
+ cifs_sb->mountdata = kstrndup(data, PAGE_SIZE, GFP_KERNEL);
+ if (cifs_sb->mountdata == NULL) {
+ root = ERR_PTR(-ENOMEM);
+ goto out_cifs_sb;
}
cifs_setup_cifs_sb(volume_info, cifs_sb);
+ rc = cifs_mount(cifs_sb, volume_info);
+ if (rc) {
+ if (!(flags & MS_SILENT))
+ cERROR(1, "cifs_mount failed w/return code = %d", rc);
+ root = ERR_PTR(rc);
+ goto out_mountdata;
+ }
+
mnt_data.vol = volume_info;
mnt_data.cifs_sb = cifs_sb;
mnt_data.flags = flags;
- sb = sget(fs_type, cifs_match_super, set_anon_super, &mnt_data);
+ sb = sget(fs_type, cifs_match_super, cifs_set_super, &mnt_data);
if (IS_ERR(sb)) {
root = ERR_CAST(sb);
- goto out_cifs_sb;
+ cifs_umount(cifs_sb);
+ goto out;
}
- if (sb->s_fs_info) {
+ if (sb->s_root) {
cFYI(1, "Use existing superblock");
- goto out_shared;
+ cifs_umount(cifs_sb);
+ } else {
+ sb->s_flags = flags;
+ /* BB should we make this contingent on mount parm? */
+ sb->s_flags |= MS_NODIRATIME | MS_NOATIME;
+
+ rc = cifs_read_super(sb);
+ if (rc) {
+ root = ERR_PTR(rc);
+ goto out_super;
+ }
+
+ sb->s_flags |= MS_ACTIVE;
}
- /*
- * Copy mount params for use in submounts. Better to do
- * the copy here and deal with the error before cleanup gets
- * complicated post-mount.
- */
- cifs_sb->mountdata = kstrndup(data, PAGE_SIZE, GFP_KERNEL);
- if (cifs_sb->mountdata == NULL) {
- root = ERR_PTR(-ENOMEM);
- goto out_super;
- }
-
- sb->s_flags = flags;
- /* BB should we make this contingent on mount parm? */
- sb->s_flags |= MS_NODIRATIME | MS_NOATIME;
- sb->s_fs_info = cifs_sb;
-
- rc = cifs_read_super(sb, volume_info, dev_name,
- flags & MS_SILENT ? 1 : 0);
- if (rc) {
- root = ERR_PTR(rc);
- goto out_super;
- }
-
- sb->s_flags |= MS_ACTIVE;
-
root = cifs_get_root(volume_info, sb);
- if (root == NULL)
+ if (IS_ERR(root))
goto out_super;
cFYI(1, "dentry root is: %p", root);
goto out;
-out_shared:
- root = cifs_get_root(volume_info, sb);
- if (root)
- cFYI(1, "dentry root is: %p", root);
- goto out;
-
out_super:
- kfree(cifs_sb->mountdata);
deactivate_locked_super(sb);
-
-out_cifs_sb:
- unload_nls(cifs_sb->local_nls);
- kfree(cifs_sb);
-
out:
- cifs_cleanup_volume_info(&volume_info);
+ cifs_cleanup_volume_info(volume_info);
return root;
+
+out_mountdata:
+ kfree(cifs_sb->mountdata);
+out_cifs_sb:
+ kfree(cifs_sb);
+out_nls:
+ unload_nls(volume_info->local_nls);
+ goto out;
}
static ssize_t cifs_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
@@ -807,7 +769,7 @@
.owner = THIS_MODULE,
.name = "cifs",
.mount = cifs_do_mount,
- .kill_sb = kill_anon_super,
+ .kill_sb = cifs_kill_sb,
/* .fs_flags */
};
const struct inode_operations cifs_dir_inode_ops = {
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 64313f7..036ca83 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -129,5 +129,5 @@
extern const struct export_operations cifs_export_ops;
#endif /* CIFS_NFSD_EXPORT */
-#define CIFS_VERSION "1.72"
+#define CIFS_VERSION "1.74"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 953f844..8df28e9 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -154,12 +154,11 @@
extern void cifs_setup_cifs_sb(struct smb_vol *pvolume_info,
struct cifs_sb_info *cifs_sb);
extern int cifs_match_super(struct super_block *, void *);
-extern void cifs_cleanup_volume_info(struct smb_vol **pvolume_info);
-extern int cifs_setup_volume_info(struct smb_vol **pvolume_info,
- char *mount_data, const char *devname);
-extern int cifs_mount(struct super_block *, struct cifs_sb_info *,
- struct smb_vol *, const char *);
-extern int cifs_umount(struct super_block *, struct cifs_sb_info *);
+extern void cifs_cleanup_volume_info(struct smb_vol *pvolume_info);
+extern struct smb_vol *cifs_get_volume_info(char *mount_data,
+ const char *devname);
+extern int cifs_mount(struct cifs_sb_info *, struct smb_vol *);
+extern void cifs_umount(struct cifs_sb_info *);
extern void cifs_dfs_release_automount_timer(void);
void cifs_proc_init(void);
void cifs_proc_clean(void);
@@ -218,7 +217,8 @@
struct dfs_info3_param **preferrals,
int remap);
extern void reset_cifs_unix_caps(int xid, struct cifs_tcon *tcon,
- struct super_block *sb, struct smb_vol *vol);
+ struct cifs_sb_info *cifs_sb,
+ struct smb_vol *vol);
extern int CIFSSMBQFSInfo(const int xid, struct cifs_tcon *tcon,
struct kstatfs *FSData);
extern int SMBOldQFSInfo(const int xid, struct cifs_tcon *tcon,
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 6d88b82..ccc1afa 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -65,6 +65,8 @@
static int generic_ip_connect(struct TCP_Server_Info *server);
static void tlink_rb_insert(struct rb_root *root, struct tcon_link *new_tlink);
static void cifs_prune_tlinks(struct work_struct *work);
+static int cifs_setup_volume_info(struct smb_vol *volume_info, char *mount_data,
+ const char *devname);
/*
* cifs tcp session reconnection
@@ -152,7 +154,7 @@
mid_entry->callback(mid_entry);
}
- while (server->tcpStatus == CifsNeedReconnect) {
+ do {
try_to_freeze();
/* we should try only the port we connected to before */
@@ -167,7 +169,7 @@
server->tcpStatus = CifsNeedNegotiate;
spin_unlock(&GlobalMid_Lock);
}
- }
+ } while (server->tcpStatus == CifsNeedReconnect);
return rc;
}
@@ -784,7 +786,7 @@
struct smb_vol *vol)
{
char *value, *data, *end;
- char *mountdata_copy, *options;
+ char *mountdata_copy = NULL, *options;
unsigned int temp_len, i, j;
char separator[2];
short int override_uid = -1;
@@ -1391,7 +1393,7 @@
"/proc/fs/cifs/LookupCacheEnabled to 0\n");
} else if (strnicmp(data, "fsc", 3) == 0) {
#ifndef CONFIG_CIFS_FSCACHE
- cERROR(1, "FS-Cache support needs CONFIG_CIFS_FSCACHE"
+ cERROR(1, "FS-Cache support needs CONFIG_CIFS_FSCACHE "
"kernel config option set");
goto cifs_parse_mount_err;
#endif
@@ -1976,7 +1978,7 @@
warned_on_ntlm = true;
cERROR(1, "default security mechanism requested. The default "
"security mechanism will be upgraded from ntlm to "
- "ntlmv2 in kernel release 2.6.41");
+ "ntlmv2 in kernel release 3.1");
}
ses->overrideSecFlg = volume_info->secFlg;
@@ -2149,7 +2151,10 @@
}
static inline struct tcon_link *
-cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb);
+cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb)
+{
+ return cifs_sb->master_tlink;
+}
static int
compare_mount_options(struct super_block *sb, struct cifs_mnt_data *mnt_data)
@@ -2237,8 +2242,8 @@
rc = compare_mount_options(sb, mnt_data);
out:
- cifs_put_tlink(tlink);
spin_unlock(&cifs_tcp_ses_lock);
+ cifs_put_tlink(tlink);
return rc;
}
@@ -2471,14 +2476,6 @@
if (rc < 0)
return rc;
- rc = socket->ops->connect(socket, saddr, slen, 0);
- if (rc < 0) {
- cFYI(1, "Error %d connecting to server", rc);
- sock_release(socket);
- server->ssocket = NULL;
- return rc;
- }
-
/*
* Eventually check for other socket options to change from
* the default. sock_setsockopt not used because it expects
@@ -2507,6 +2504,14 @@
socket->sk->sk_sndbuf,
socket->sk->sk_rcvbuf, socket->sk->sk_rcvtimeo);
+ rc = socket->ops->connect(socket, saddr, slen, 0);
+ if (rc < 0) {
+ cFYI(1, "Error %d connecting to server", rc);
+ sock_release(socket);
+ server->ssocket = NULL;
+ return rc;
+ }
+
if (sport == htons(RFC1001_PORT))
rc = ip_rfc1001_connect(server);
@@ -2543,7 +2548,7 @@
}
void reset_cifs_unix_caps(int xid, struct cifs_tcon *tcon,
- struct super_block *sb, struct smb_vol *vol_info)
+ struct cifs_sb_info *cifs_sb, struct smb_vol *vol_info)
{
/* if we are reconnecting then should we check to see if
* any requested capabilities changed locally e.g. via
@@ -2597,22 +2602,23 @@
cap &= ~CIFS_UNIX_POSIX_ACL_CAP;
else if (CIFS_UNIX_POSIX_ACL_CAP & cap) {
cFYI(1, "negotiated posix acl support");
- if (sb)
- sb->s_flags |= MS_POSIXACL;
+ if (cifs_sb)
+ cifs_sb->mnt_cifs_flags |=
+ CIFS_MOUNT_POSIXACL;
}
if (vol_info && vol_info->posix_paths == 0)
cap &= ~CIFS_UNIX_POSIX_PATHNAMES_CAP;
else if (cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) {
cFYI(1, "negotiate posix pathnames");
- if (sb)
- CIFS_SB(sb)->mnt_cifs_flags |=
+ if (cifs_sb)
+ cifs_sb->mnt_cifs_flags |=
CIFS_MOUNT_POSIX_PATHS;
}
- if (sb && (CIFS_SB(sb)->rsize > 127 * 1024)) {
+ if (cifs_sb && (cifs_sb->rsize > 127 * 1024)) {
if ((cap & CIFS_UNIX_LARGE_READ_CAP) == 0) {
- CIFS_SB(sb)->rsize = 127 * 1024;
+ cifs_sb->rsize = 127 * 1024;
cFYI(DBG2, "larger reads not supported by srv");
}
}
@@ -2659,6 +2665,9 @@
{
INIT_DELAYED_WORK(&cifs_sb->prune_tlinks, cifs_prune_tlinks);
+ spin_lock_init(&cifs_sb->tlink_tree_lock);
+ cifs_sb->tlink_tree = RB_ROOT;
+
if (pvolume_info->rsize > CIFSMaxBufSize) {
cERROR(1, "rsize %d too large, using MaxBufSize",
pvolume_info->rsize);
@@ -2747,21 +2756,21 @@
/*
* When the server supports very large writes via POSIX extensions, we can
- * allow up to 2^24 - PAGE_CACHE_SIZE.
+ * allow up to 2^24-1, minus the size of a WRITE_AND_X header, not including
+ * the RFC1001 length.
*
* Note that this might make for "interesting" allocation problems during
- * writeback however (as we have to allocate an array of pointers for the
- * pages). A 16M write means ~32kb page array with PAGE_CACHE_SIZE == 4096.
+ * writeback however as we have to allocate an array of pointers for the
+ * pages. A 16M write means ~32kb page array with PAGE_CACHE_SIZE == 4096.
*/
-#define CIFS_MAX_WSIZE ((1<<24) - PAGE_CACHE_SIZE)
+#define CIFS_MAX_WSIZE ((1<<24) - 1 - sizeof(WRITE_REQ) + 4)
/*
- * When the server doesn't allow large posix writes, default to a wsize of
- * 128k - PAGE_CACHE_SIZE -- one page less than the largest frame size
- * described in RFC1001. This allows space for the header without going over
- * that by default.
+ * When the server doesn't allow large posix writes, only allow a wsize of
+ * 128k minus the size of the WRITE_AND_X header. That allows for a write up
+ * to the maximum size described by RFC1002.
*/
-#define CIFS_MAX_RFC1001_WSIZE (128 * 1024 - PAGE_CACHE_SIZE)
+#define CIFS_MAX_RFC1002_WSIZE (128 * 1024 - sizeof(WRITE_REQ) + 4)
/*
* The default wsize is 1M. find_get_pages seems to return a maximum of 256
@@ -2780,11 +2789,18 @@
/* can server support 24-bit write sizes? (via UNIX extensions) */
if (!tcon->unix_ext || !(unix_cap & CIFS_UNIX_LARGE_WRITE_CAP))
- wsize = min_t(unsigned int, wsize, CIFS_MAX_RFC1001_WSIZE);
+ wsize = min_t(unsigned int, wsize, CIFS_MAX_RFC1002_WSIZE);
- /* no CAP_LARGE_WRITE_X? Limit it to 16 bits */
- if (!(server->capabilities & CAP_LARGE_WRITE_X))
- wsize = min_t(unsigned int, wsize, USHRT_MAX);
+ /*
+ * no CAP_LARGE_WRITE_X or is signing enabled without CAP_UNIX set?
+ * Limit it to max buffer offered by the server, minus the size of the
+ * WRITEX header, not including the 4 byte RFC1001 length.
+ */
+ if (!(server->capabilities & CAP_LARGE_WRITE_X) ||
+ (!(server->capabilities & CAP_UNIX) &&
+ (server->sec_mode & (SECMODE_SIGN_ENABLED|SECMODE_SIGN_REQUIRED))))
+ wsize = min_t(unsigned int, wsize,
+ server->maxBuf - sizeof(WRITE_REQ) + 4);
/* hard limit of CIFS_MAX_WSIZE */
wsize = min_t(unsigned int, wsize, CIFS_MAX_WSIZE);
@@ -2816,15 +2832,9 @@
return rc;
}
-void
-cifs_cleanup_volume_info(struct smb_vol **pvolume_info)
+static void
+cleanup_volume_info_contents(struct smb_vol *volume_info)
{
- struct smb_vol *volume_info;
-
- if (!pvolume_info || !*pvolume_info)
- return;
-
- volume_info = *pvolume_info;
kfree(volume_info->username);
kzfree(volume_info->password);
kfree(volume_info->UNC);
@@ -2832,28 +2842,44 @@
kfree(volume_info->domainname);
kfree(volume_info->iocharset);
kfree(volume_info->prepath);
- kfree(volume_info);
- *pvolume_info = NULL;
- return;
}
+void
+cifs_cleanup_volume_info(struct smb_vol *volume_info)
+{
+ if (!volume_info)
+ return;
+ cleanup_volume_info_contents(volume_info);
+ kfree(volume_info);
+}
+
+
#ifdef CONFIG_CIFS_DFS_UPCALL
/* build_path_to_root returns full path to root when
* we do not have an exiting connection (tcon) */
static char *
-build_unc_path_to_root(const struct smb_vol *volume_info,
+build_unc_path_to_root(const struct smb_vol *vol,
const struct cifs_sb_info *cifs_sb)
{
- char *full_path;
+ char *full_path, *pos;
+ unsigned int pplen = vol->prepath ? strlen(vol->prepath) : 0;
+ unsigned int unc_len = strnlen(vol->UNC, MAX_TREE_SIZE + 1);
- int unc_len = strnlen(volume_info->UNC, MAX_TREE_SIZE + 1);
- full_path = kmalloc(unc_len + 1, GFP_KERNEL);
+ full_path = kmalloc(unc_len + pplen + 1, GFP_KERNEL);
if (full_path == NULL)
return ERR_PTR(-ENOMEM);
- strncpy(full_path, volume_info->UNC, unc_len);
- full_path[unc_len] = 0; /* add trailing null */
+ strncpy(full_path, vol->UNC, unc_len);
+ pos = full_path + unc_len;
+
+ if (pplen) {
+ strncpy(pos, vol->prepath, pplen);
+ pos += pplen;
+ }
+
+ *pos = '\0'; /* add trailing null */
convert_delimiter(full_path, CIFS_DIR_SEP(cifs_sb));
+ cFYI(1, "%s: full_path=%s", __func__, full_path);
return full_path;
}
@@ -2896,15 +2922,18 @@
&fake_devname);
free_dfs_info_array(referrals, num_referrals);
- kfree(fake_devname);
-
- if (cifs_sb->mountdata != NULL)
- kfree(cifs_sb->mountdata);
if (IS_ERR(mdata)) {
rc = PTR_ERR(mdata);
mdata = NULL;
+ } else {
+ cleanup_volume_info_contents(volume_info);
+ memset(volume_info, '\0', sizeof(*volume_info));
+ rc = cifs_setup_volume_info(volume_info, mdata,
+ fake_devname);
}
+ kfree(fake_devname);
+ kfree(cifs_sb->mountdata);
cifs_sb->mountdata = mdata;
}
kfree(full_path);
@@ -2912,29 +2941,20 @@
}
#endif
-int cifs_setup_volume_info(struct smb_vol **pvolume_info, char *mount_data,
- const char *devname)
+static int
+cifs_setup_volume_info(struct smb_vol *volume_info, char *mount_data,
+ const char *devname)
{
- struct smb_vol *volume_info;
int rc = 0;
- *pvolume_info = NULL;
-
- volume_info = kzalloc(sizeof(struct smb_vol), GFP_KERNEL);
- if (!volume_info) {
- rc = -ENOMEM;
- goto out;
- }
-
- if (cifs_parse_mount_options(mount_data, devname,
- volume_info)) {
- rc = -EINVAL;
- goto out;
- }
+ if (cifs_parse_mount_options(mount_data, devname, volume_info))
+ return -EINVAL;
if (volume_info->nullauth) {
cFYI(1, "null user");
- volume_info->username = "";
+ volume_info->username = kzalloc(1, GFP_KERNEL);
+ if (volume_info->username == NULL)
+ return -ENOMEM;
} else if (volume_info->username) {
/* BB fixme parse for domain name here */
cFYI(1, "Username: %s", volume_info->username);
@@ -2942,8 +2962,7 @@
cifserror("No username specified");
/* In userspace mount helper we can get user name from alternate
locations such as env variables and files on disk */
- rc = -EINVAL;
- goto out;
+ return -EINVAL;
}
/* this is needed for ASCII cp to Unicode converts */
@@ -2955,21 +2974,34 @@
if (volume_info->local_nls == NULL) {
cERROR(1, "CIFS mount error: iocharset %s not found",
volume_info->iocharset);
- rc = -ELIBACC;
- goto out;
+ return -ELIBACC;
}
}
- *pvolume_info = volume_info;
- return rc;
-out:
- cifs_cleanup_volume_info(&volume_info);
return rc;
}
+struct smb_vol *
+cifs_get_volume_info(char *mount_data, const char *devname)
+{
+ int rc;
+ struct smb_vol *volume_info;
+
+ volume_info = kzalloc(sizeof(struct smb_vol), GFP_KERNEL);
+ if (!volume_info)
+ return ERR_PTR(-ENOMEM);
+
+ rc = cifs_setup_volume_info(volume_info, mount_data, devname);
+ if (rc) {
+ cifs_cleanup_volume_info(volume_info);
+ volume_info = ERR_PTR(rc);
+ }
+
+ return volume_info;
+}
+
int
-cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
- struct smb_vol *volume_info, const char *devname)
+cifs_mount(struct cifs_sb_info *cifs_sb, struct smb_vol *volume_info)
{
int rc = 0;
int xid;
@@ -2980,6 +3012,15 @@
struct tcon_link *tlink;
#ifdef CONFIG_CIFS_DFS_UPCALL
int referral_walks_count = 0;
+#endif
+
+ rc = bdi_setup_and_register(&cifs_sb->bdi, "cifs", BDI_CAP_MAP_COPY);
+ if (rc)
+ return rc;
+
+ cifs_sb->bdi.ra_pages = default_backing_dev_info.ra_pages;
+
+#ifdef CONFIG_CIFS_DFS_UPCALL
try_mount_again:
/* cleanup activities if we're chasing a referral */
if (referral_walks_count) {
@@ -2988,7 +3029,6 @@
else if (pSesInfo)
cifs_put_smb_ses(pSesInfo);
- cifs_cleanup_volume_info(&volume_info);
FreeXid(xid);
}
#endif
@@ -3004,6 +3044,7 @@
srvTcp = cifs_get_tcp_session(volume_info);
if (IS_ERR(srvTcp)) {
rc = PTR_ERR(srvTcp);
+ bdi_destroy(&cifs_sb->bdi);
goto out;
}
@@ -3015,14 +3056,6 @@
goto mount_fail_check;
}
- if (pSesInfo->capabilities & CAP_LARGE_FILES)
- sb->s_maxbytes = MAX_LFS_FILESIZE;
- else
- sb->s_maxbytes = MAX_NON_LFS;
-
- /* BB FIXME fix time_gran to be larger for LANMAN sessions */
- sb->s_time_gran = 100;
-
/* search for existing tcon to this server share */
tcon = cifs_get_tcon(pSesInfo, volume_info);
if (IS_ERR(tcon)) {
@@ -3035,7 +3068,7 @@
if (tcon->ses->capabilities & CAP_UNIX) {
/* reset of caps checks mount to see if unix extensions
disabled for just this mount */
- reset_cifs_unix_caps(xid, tcon, sb, volume_info);
+ reset_cifs_unix_caps(xid, tcon, cifs_sb, volume_info);
if ((tcon->ses->server->tcpStatus == CifsNeedReconnect) &&
(le64_to_cpu(tcon->fsUnixInfo.Capability) &
CIFS_UNIX_TRANSPORT_ENCRYPTION_MANDATORY_CAP)) {
@@ -3158,6 +3191,7 @@
cifs_put_smb_ses(pSesInfo);
else
cifs_put_tcp_session(srvTcp);
+ bdi_destroy(&cifs_sb->bdi);
goto out;
}
@@ -3171,6 +3205,10 @@
return rc;
}
+/*
+ * Issue a TREE_CONNECT request. Note that for IPC$ shares, that the tcon
+ * pointer may be NULL.
+ */
int
CIFSTCon(unsigned int xid, struct cifs_ses *ses,
const char *tree, struct cifs_tcon *tcon,
@@ -3205,7 +3243,7 @@
pSMB->AndXCommand = 0xFF;
pSMB->Flags = cpu_to_le16(TCON_EXTENDED_SECINFO);
bcc_ptr = &pSMB->Password[0];
- if ((ses->server->sec_mode) & SECMODE_USER) {
+ if (!tcon || (ses->server->sec_mode & SECMODE_USER)) {
pSMB->PasswordLength = cpu_to_le16(1); /* minimum */
*bcc_ptr = 0; /* password is null byte */
bcc_ptr++; /* skip password */
@@ -3328,8 +3366,8 @@
return rc;
}
-int
-cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb)
+void
+cifs_umount(struct cifs_sb_info *cifs_sb)
{
struct rb_root *root = &cifs_sb->tlink_tree;
struct rb_node *node;
@@ -3350,7 +3388,10 @@
}
spin_unlock(&cifs_sb->tlink_tree_lock);
- return 0;
+ bdi_destroy(&cifs_sb->bdi);
+ kfree(cifs_sb->mountdata);
+ unload_nls(cifs_sb->local_nls);
+ kfree(cifs_sb);
}
int cifs_negotiate_protocol(unsigned int xid, struct cifs_ses *ses)
@@ -3371,7 +3412,7 @@
}
if (rc == 0) {
spin_lock(&GlobalMid_Lock);
- if (server->tcpStatus != CifsExiting)
+ if (server->tcpStatus == CifsNeedNegotiate)
server->tcpStatus = CifsGood;
else
rc = -EHOSTDOWN;
@@ -3444,7 +3485,7 @@
goto out;
}
- snprintf(username, MAX_USERNAME_SIZE, "krb50x%x", fsuid);
+ snprintf(username, sizeof(username), "krb50x%x", fsuid);
vol_info->username = username;
vol_info->local_nls = cifs_sb->local_nls;
vol_info->linux_uid = fsuid;
@@ -3484,12 +3525,6 @@
return tcon;
}
-static inline struct tcon_link *
-cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb)
-{
- return cifs_sb->master_tlink;
-}
-
struct cifs_tcon *
cifs_sb_master_tcon(struct cifs_sb_info *cifs_sb)
{
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 81914df..fa8c21d9 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -55,6 +55,7 @@
char dirsep;
struct cifs_sb_info *cifs_sb = CIFS_SB(direntry->d_sb);
struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb);
+ unsigned seq;
if (direntry == NULL)
return NULL; /* not much we can do if dentry is freed and
@@ -68,22 +69,29 @@
dfsplen = 0;
cifs_bp_rename_retry:
namelen = dfsplen;
+ seq = read_seqbegin(&rename_lock);
+ rcu_read_lock();
for (temp = direntry; !IS_ROOT(temp);) {
namelen += (1 + temp->d_name.len);
temp = temp->d_parent;
if (temp == NULL) {
cERROR(1, "corrupt dentry");
+ rcu_read_unlock();
return NULL;
}
}
+ rcu_read_unlock();
full_path = kmalloc(namelen+1, GFP_KERNEL);
if (full_path == NULL)
return full_path;
full_path[namelen] = 0; /* trailing null */
+ rcu_read_lock();
for (temp = direntry; !IS_ROOT(temp);) {
+ spin_lock(&temp->d_lock);
namelen -= 1 + temp->d_name.len;
if (namelen < 0) {
+ spin_unlock(&temp->d_lock);
break;
} else {
full_path[namelen] = dirsep;
@@ -91,14 +99,17 @@
temp->d_name.len);
cFYI(0, "name: %s", full_path + namelen);
}
+ spin_unlock(&temp->d_lock);
temp = temp->d_parent;
if (temp == NULL) {
cERROR(1, "corrupt dentry");
+ rcu_read_unlock();
kfree(full_path);
return NULL;
}
}
- if (namelen != dfsplen) {
+ rcu_read_unlock();
+ if (namelen != dfsplen || read_seqretry(&rename_lock, seq)) {
cERROR(1, "did not end path lookup where expected namelen is %d",
namelen);
/* presumably this is only possible if racing with a rename
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index bb71471..a9b4a24 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1737,7 +1737,7 @@
io_parms.pid = pid;
io_parms.tcon = pTcon;
io_parms.offset = *poffset;
- io_parms.length = len;
+ io_parms.length = cur_len;
rc = CIFSSMBRead(xid, &io_parms, &bytes_read,
&read_data, &buf_type);
pSMBr = (struct smb_com_read_rsp *)read_data;
diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c
index d368a47..42e5363 100644
--- a/fs/cifs/fscache.c
+++ b/fs/cifs/fscache.c
@@ -28,14 +28,14 @@
server->fscache =
fscache_acquire_cookie(cifs_fscache_netfs.primary_index,
&cifs_fscache_server_index_def, server);
- cFYI(1, "CIFS: get client cookie (0x%p/0x%p)", server,
- server->fscache);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, server,
+ server->fscache);
}
void cifs_fscache_release_client_cookie(struct TCP_Server_Info *server)
{
- cFYI(1, "CIFS: release client cookie (0x%p/0x%p)", server,
- server->fscache);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, server,
+ server->fscache);
fscache_relinquish_cookie(server->fscache, 0);
server->fscache = NULL;
}
@@ -47,13 +47,13 @@
tcon->fscache =
fscache_acquire_cookie(server->fscache,
&cifs_fscache_super_index_def, tcon);
- cFYI(1, "CIFS: get superblock cookie (0x%p/0x%p)",
- server->fscache, tcon->fscache);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, server->fscache,
+ tcon->fscache);
}
void cifs_fscache_release_super_cookie(struct cifs_tcon *tcon)
{
- cFYI(1, "CIFS: releasing superblock cookie (0x%p)", tcon->fscache);
+ cFYI(1, "%s: (0x%p)", __func__, tcon->fscache);
fscache_relinquish_cookie(tcon->fscache, 0);
tcon->fscache = NULL;
}
@@ -70,8 +70,8 @@
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE) {
cifsi->fscache = fscache_acquire_cookie(tcon->fscache,
&cifs_fscache_inode_object_def, cifsi);
- cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache,
- cifsi->fscache);
+ cFYI(1, "%s: got FH cookie (0x%p/0x%p)", __func__,
+ tcon->fscache, cifsi->fscache);
}
}
@@ -80,8 +80,7 @@
struct cifsInodeInfo *cifsi = CIFS_I(inode);
if (cifsi->fscache) {
- cFYI(1, "CIFS releasing inode cookie (0x%p)",
- cifsi->fscache);
+ cFYI(1, "%s: (0x%p)", __func__, cifsi->fscache);
fscache_relinquish_cookie(cifsi->fscache, 0);
cifsi->fscache = NULL;
}
@@ -92,8 +91,8 @@
struct cifsInodeInfo *cifsi = CIFS_I(inode);
if (cifsi->fscache) {
- cFYI(1, "CIFS disabling inode cookie (0x%p)",
- cifsi->fscache);
+ cFYI(1, "%s: (0x%p)", __func__, cifsi->fscache);
+ fscache_uncache_all_inode_pages(cifsi->fscache, inode);
fscache_relinquish_cookie(cifsi->fscache, 1);
cifsi->fscache = NULL;
}
@@ -121,8 +120,8 @@
cifs_sb_master_tcon(cifs_sb)->fscache,
&cifs_fscache_inode_object_def,
cifsi);
- cFYI(1, "CIFS: new cookie 0x%p oldcookie 0x%p",
- cifsi->fscache, old);
+ cFYI(1, "%s: new cookie 0x%p oldcookie 0x%p",
+ __func__, cifsi->fscache, old);
}
}
@@ -132,8 +131,8 @@
struct inode *inode = page->mapping->host;
struct cifsInodeInfo *cifsi = CIFS_I(inode);
- cFYI(1, "CIFS: fscache release page (0x%p/0x%p)",
- page, cifsi->fscache);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, page,
+ cifsi->fscache);
if (!fscache_maybe_release_page(cifsi->fscache, page, gfp))
return 0;
}
@@ -144,8 +143,7 @@
static void cifs_readpage_from_fscache_complete(struct page *page, void *ctx,
int error)
{
- cFYI(1, "CFS: readpage_from_fscache_complete (0x%p/%d)",
- page, error);
+ cFYI(1, "%s: (0x%p/%d)", __func__, page, error);
if (!error)
SetPageUptodate(page);
unlock_page(page);
@@ -158,7 +156,7 @@
{
int ret;
- cFYI(1, "CIFS: readpage_from_fscache(fsc:%p, p:%p, i:0x%p",
+ cFYI(1, "%s: (fsc:%p, p:%p, i:0x%p", __func__,
CIFS_I(inode)->fscache, page, inode);
ret = fscache_read_or_alloc_page(CIFS_I(inode)->fscache, page,
cifs_readpage_from_fscache_complete,
@@ -167,11 +165,11 @@
switch (ret) {
case 0: /* page found in fscache, read submitted */
- cFYI(1, "CIFS: readpage_from_fscache: submitted");
+ cFYI(1, "%s: submitted", __func__);
return ret;
case -ENOBUFS: /* page won't be cached */
case -ENODATA: /* page not in cache */
- cFYI(1, "CIFS: readpage_from_fscache %d", ret);
+ cFYI(1, "%s: %d", __func__, ret);
return 1;
default:
@@ -190,7 +188,7 @@
{
int ret;
- cFYI(1, "CIFS: __cifs_readpages_from_fscache (0x%p/%u/0x%p)",
+ cFYI(1, "%s: (0x%p/%u/0x%p)", __func__,
CIFS_I(inode)->fscache, *nr_pages, inode);
ret = fscache_read_or_alloc_pages(CIFS_I(inode)->fscache, mapping,
pages, nr_pages,
@@ -199,12 +197,12 @@
mapping_gfp_mask(mapping));
switch (ret) {
case 0: /* read submitted to the cache for all pages */
- cFYI(1, "CIFS: readpages_from_fscache: submitted");
+ cFYI(1, "%s: submitted", __func__);
return ret;
case -ENOBUFS: /* some pages are not cached and can't be */
case -ENODATA: /* some pages are not cached */
- cFYI(1, "CIFS: readpages_from_fscache: no page");
+ cFYI(1, "%s: no page", __func__);
return 1;
default:
@@ -218,7 +216,7 @@
{
int ret;
- cFYI(1, "CIFS: readpage_to_fscache(fsc: %p, p: %p, i: %p",
+ cFYI(1, "%s: (fsc: %p, p: %p, i: %p)", __func__,
CIFS_I(inode)->fscache, page, inode);
ret = fscache_write_page(CIFS_I(inode)->fscache, page, GFP_KERNEL);
if (ret != 0)
@@ -230,7 +228,7 @@
struct cifsInodeInfo *cifsi = CIFS_I(inode);
struct fscache_cookie *cookie = cifsi->fscache;
- cFYI(1, "CIFS: fscache invalidatepage (0x%p/0x%p)", page, cookie);
+ cFYI(1, "%s: (0x%p/0x%p)", __func__, page, cookie);
fscache_wait_on_page_write(cookie, page);
fscache_uncache_page(cookie, page);
}
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 3892ab8..d3e6196 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -428,8 +428,7 @@
(SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) {
flags |= NTLMSSP_NEGOTIATE_SIGN;
if (!ses->server->session_estab)
- flags |= NTLMSSP_NEGOTIATE_KEY_XCH |
- NTLMSSP_NEGOTIATE_EXTENDED_SEC;
+ flags |= NTLMSSP_NEGOTIATE_KEY_XCH;
}
sec_blob->NegotiateFlags = cpu_to_le32(flags);
@@ -465,10 +464,11 @@
NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_EXTENDED_SEC;
if (ses->server->sec_mode &
- (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) {
flags |= NTLMSSP_NEGOTIATE_SIGN;
- if (ses->server->sec_mode & SECMODE_SIGN_REQUIRED)
- flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+ if (!ses->server->session_estab)
+ flags |= NTLMSSP_NEGOTIATE_KEY_XCH;
+ }
tmp = pbuffer + sizeof(AUTHENTICATE_MESSAGE);
sec_blob->NegotiateFlags = cpu_to_le32(flags);
diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c
index 1525d5e..1c5b770 100644
--- a/fs/cifs/smbencrypt.c
+++ b/fs/cifs/smbencrypt.c
@@ -90,12 +90,10 @@
sg_init_one(&sgout, out, 8);
rc = crypto_blkcipher_encrypt(&desc, &sgout, &sgin, 8);
- if (rc) {
+ if (rc)
cERROR(1, "could not encrypt crypt key rc: %d\n", rc);
- crypto_free_blkcipher(tfm_des);
- goto smbhash_err;
- }
+ crypto_free_blkcipher(tfm_des);
smbhash_err:
return rc;
}
diff --git a/fs/coda/pioctl.c b/fs/coda/pioctl.c
index 6cbb3af..cb140ef 100644
--- a/fs/coda/pioctl.c
+++ b/fs/coda/pioctl.c
@@ -43,8 +43,6 @@
/* the coda pioctl inode ops */
static int coda_ioctl_permission(struct inode *inode, int mask, unsigned int flags)
{
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
return (mask & MAY_EXEC) ? -EACCES : 0;
}
diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c
index e141939..739fb59 100644
--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -37,7 +37,7 @@
/* These macros may change in future, to provide better st_ino semantics. */
#define OFFSET(x) ((x)->i_ino)
-static unsigned long cramino(struct cramfs_inode *cino, unsigned int offset)
+static unsigned long cramino(const struct cramfs_inode *cino, unsigned int offset)
{
if (!cino->offset)
return offset + 1;
@@ -61,7 +61,7 @@
}
static struct inode *get_cramfs_inode(struct super_block *sb,
- struct cramfs_inode *cramfs_inode, unsigned int offset)
+ const struct cramfs_inode *cramfs_inode, unsigned int offset)
{
struct inode *inode;
static struct timespec zerotime;
@@ -317,7 +317,7 @@
/* Set it all up.. */
sb->s_op = &cramfs_ops;
root = get_cramfs_inode(sb, &super.root, 0);
- if (!root)
+ if (IS_ERR(root))
goto out;
sb->s_root = d_alloc_root(root);
if (!sb->s_root) {
@@ -423,6 +423,7 @@
static struct dentry * cramfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
{
unsigned int offset = 0;
+ struct inode *inode = NULL;
int sorted;
mutex_lock(&read_mutex);
@@ -449,8 +450,8 @@
for (;;) {
if (!namelen) {
- mutex_unlock(&read_mutex);
- return ERR_PTR(-EIO);
+ inode = ERR_PTR(-EIO);
+ goto out;
}
if (name[namelen-1])
break;
@@ -462,17 +463,18 @@
if (retval > 0)
continue;
if (!retval) {
- struct cramfs_inode entry = *de;
- mutex_unlock(&read_mutex);
- d_add(dentry, get_cramfs_inode(dir->i_sb, &entry, dir_off));
- return NULL;
+ inode = get_cramfs_inode(dir->i_sb, de, dir_off);
+ break;
}
/* else (retval < 0) */
if (sorted)
break;
}
+out:
mutex_unlock(&read_mutex);
- d_add(dentry, NULL);
+ if (IS_ERR(inode))
+ return ERR_CAST(inode);
+ d_add(dentry, inode);
return NULL;
}
diff --git a/fs/dcache.c b/fs/dcache.c
index 37f72ee..fbdcbca 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1813,8 +1813,6 @@
tname = dentry->d_name.name;
i = dentry->d_inode;
prefetch(tname);
- if (i)
- prefetch(i);
/*
* This seqcount check is required to ensure name and
* len are loaded atomically, so as not to walk off the
@@ -2213,14 +2211,15 @@
* The hash value has to match the hash queue that the dentry is on..
*/
/*
- * d_move - move a dentry
+ * __d_move - move a dentry
* @dentry: entry to move
* @target: new dentry
*
* Update the dcache to reflect the move of a file name. Negative
- * dcache entries should not be moved in this way.
+ * dcache entries should not be moved in this way. Caller hold
+ * rename_lock.
*/
-void d_move(struct dentry * dentry, struct dentry * target)
+static void __d_move(struct dentry * dentry, struct dentry * target)
{
if (!dentry->d_inode)
printk(KERN_WARNING "VFS: moving negative dcache entry\n");
@@ -2228,8 +2227,6 @@
BUG_ON(d_ancestor(dentry, target));
BUG_ON(d_ancestor(target, dentry));
- write_seqlock(&rename_lock);
-
dentry_lock_for_move(dentry, target);
write_seqcount_begin(&dentry->d_seq);
@@ -2275,6 +2272,20 @@
spin_unlock(&target->d_lock);
fsnotify_d_move(dentry);
spin_unlock(&dentry->d_lock);
+}
+
+/*
+ * d_move - move a dentry
+ * @dentry: entry to move
+ * @target: new dentry
+ *
+ * Update the dcache to reflect the move of a file name. Negative
+ * dcache entries should not be moved in this way.
+ */
+void d_move(struct dentry *dentry, struct dentry *target)
+{
+ write_seqlock(&rename_lock);
+ __d_move(dentry, target);
write_sequnlock(&rename_lock);
}
EXPORT_SYMBOL(d_move);
@@ -2302,7 +2313,7 @@
* This helper attempts to cope with remotely renamed directories
*
* It assumes that the caller is already holding
- * dentry->d_parent->d_inode->i_mutex and the inode->i_lock
+ * dentry->d_parent->d_inode->i_mutex, inode->i_lock and rename_lock
*
* Note: If ever the locking in lock_rename() changes, then please
* remember to update this too...
@@ -2317,11 +2328,6 @@
if (alias->d_parent == dentry->d_parent)
goto out_unalias;
- /* Check for loops */
- ret = ERR_PTR(-ELOOP);
- if (d_ancestor(alias, dentry))
- goto out_err;
-
/* See lock_rename() */
ret = ERR_PTR(-EBUSY);
if (!mutex_trylock(&dentry->d_sb->s_vfs_rename_mutex))
@@ -2331,7 +2337,7 @@
goto out_err;
m2 = &alias->d_parent->d_inode->i_mutex;
out_unalias:
- d_move(alias, dentry);
+ __d_move(alias, dentry);
ret = alias;
out_err:
spin_unlock(&inode->i_lock);
@@ -2416,15 +2422,24 @@
alias = __d_find_alias(inode, 0);
if (alias) {
actual = alias;
- /* Is this an anonymous mountpoint that we could splice
- * into our tree? */
- if (IS_ROOT(alias)) {
+ write_seqlock(&rename_lock);
+
+ if (d_ancestor(alias, dentry)) {
+ /* Check for loops */
+ actual = ERR_PTR(-ELOOP);
+ } else if (IS_ROOT(alias)) {
+ /* Is this an anonymous mountpoint that we
+ * could splice into our tree? */
__d_materialise_dentry(dentry, alias);
+ write_sequnlock(&rename_lock);
__d_drop(alias);
goto found;
+ } else {
+ /* Nope, but we must(!) avoid directory
+ * aliasing */
+ actual = __d_unalias(inode, dentry, alias);
}
- /* Nope, but we must(!) avoid directory aliasing */
- actual = __d_unalias(inode, dentry, alias);
+ write_sequnlock(&rename_lock);
if (IS_ERR(actual))
dput(alias);
goto out_nolock;
diff --git a/fs/dcookies.c b/fs/dcookies.c
index a21cabd..dda0dc7 100644
--- a/fs/dcookies.c
+++ b/fs/dcookies.c
@@ -178,6 +178,8 @@
/* FIXME: (deleted) ? */
path = d_path(&dcs->path, kbuf, PAGE_SIZE);
+ mutex_unlock(&dcookie_mutex);
+
if (IS_ERR(path)) {
err = PTR_ERR(path);
goto out_free;
@@ -194,6 +196,7 @@
out_free:
kfree(kbuf);
+ return err;
out:
mutex_unlock(&dcookie_mutex);
return err;
diff --git a/fs/exec.c b/fs/exec.c
index ea5f748..6075a1e 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1093,6 +1093,7 @@
bprm->mm = NULL; /* We're using it now */
+ set_fs(USER_DS);
current->flags &= ~(PF_RANDOMIZE | PF_KTHREAD);
flush_thread();
current->personality &= ~bprm->per_clear;
@@ -1357,10 +1358,6 @@
if (retval)
return retval;
- /* kernel module loader fixup */
- /* so we don't try to load run modprobe in kernel space. */
- set_fs(USER_DS);
-
retval = audit_bprm(bprm);
if (retval)
return retval;
@@ -1999,7 +1996,7 @@
* is a special value that we use to trap recursive
* core dumps
*/
-static int umh_pipe_setup(struct subprocess_info *info)
+static int umh_pipe_setup(struct subprocess_info *info, struct cred *new)
{
struct file *rp, *wp;
struct fdtable *fdt;
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 06065bd..c57bedd 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -913,7 +913,7 @@
unsigned long ino = exofs_parent_ino(child);
if (!ino)
- return NULL;
+ return ERR_PTR(-ESTALE);
return d_obtain_alias(exofs_iget(child->d_inode->i_sb, ino));
}
diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h
index 2e29abb..095c36f 100644
--- a/fs/ext4/ext4_extents.h
+++ b/fs/ext4/ext4_extents.h
@@ -125,7 +125,7 @@
* positive retcode - signal for ext4_ext_walk_space(), see below
* callback must return valid extent (passed or newly created)
*/
-typedef int (*ext_prepare_callback)(struct inode *, struct ext4_ext_path *,
+typedef int (*ext_prepare_callback)(struct inode *, ext4_lblk_t,
struct ext4_ext_cache *,
struct ext4_extent *, void *);
@@ -133,8 +133,11 @@
#define EXT_BREAK 1
#define EXT_REPEAT 2
-/* Maximum logical block in a file; ext4_extent's ee_block is __le32 */
-#define EXT_MAX_BLOCK 0xffffffff
+/*
+ * Maximum number of logical blocks in a file; ext4_extent's ee_block is
+ * __le32.
+ */
+#define EXT_MAX_BLOCKS 0xffffffff
/*
* EXT_INIT_MAX_LEN is the maximum number of blocks we can have in an
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 5199bac..f815cc8 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1408,7 +1408,7 @@
/*
* ext4_ext_next_allocated_block:
- * returns allocated block in subsequent extent or EXT_MAX_BLOCK.
+ * returns allocated block in subsequent extent or EXT_MAX_BLOCKS.
* NOTE: it considers block number from index entry as
* allocated block. Thus, index entries have to be consistent
* with leaves.
@@ -1422,7 +1422,7 @@
depth = path->p_depth;
if (depth == 0 && path->p_ext == NULL)
- return EXT_MAX_BLOCK;
+ return EXT_MAX_BLOCKS;
while (depth >= 0) {
if (depth == path->p_depth) {
@@ -1439,12 +1439,12 @@
depth--;
}
- return EXT_MAX_BLOCK;
+ return EXT_MAX_BLOCKS;
}
/*
* ext4_ext_next_leaf_block:
- * returns first allocated block from next leaf or EXT_MAX_BLOCK
+ * returns first allocated block from next leaf or EXT_MAX_BLOCKS
*/
static ext4_lblk_t ext4_ext_next_leaf_block(struct inode *inode,
struct ext4_ext_path *path)
@@ -1456,7 +1456,7 @@
/* zero-tree has no leaf blocks at all */
if (depth == 0)
- return EXT_MAX_BLOCK;
+ return EXT_MAX_BLOCKS;
/* go to index block */
depth--;
@@ -1469,7 +1469,7 @@
depth--;
}
- return EXT_MAX_BLOCK;
+ return EXT_MAX_BLOCKS;
}
/*
@@ -1677,13 +1677,13 @@
*/
if (b2 < b1) {
b2 = ext4_ext_next_allocated_block(path);
- if (b2 == EXT_MAX_BLOCK)
+ if (b2 == EXT_MAX_BLOCKS)
goto out;
}
/* check for wrap through zero on extent logical start block*/
if (b1 + len1 < b1) {
- len1 = EXT_MAX_BLOCK - b1;
+ len1 = EXT_MAX_BLOCKS - b1;
newext->ee_len = cpu_to_le16(len1);
ret = 1;
}
@@ -1767,7 +1767,7 @@
fex = EXT_LAST_EXTENT(eh);
next = ext4_ext_next_leaf_block(inode, path);
if (le32_to_cpu(newext->ee_block) > le32_to_cpu(fex->ee_block)
- && next != EXT_MAX_BLOCK) {
+ && next != EXT_MAX_BLOCKS) {
ext_debug("next leaf block - %d\n", next);
BUG_ON(npath != NULL);
npath = ext4_ext_find_extent(inode, next, NULL);
@@ -1887,7 +1887,7 @@
BUG_ON(func == NULL);
BUG_ON(inode == NULL);
- while (block < last && block != EXT_MAX_BLOCK) {
+ while (block < last && block != EXT_MAX_BLOCKS) {
num = last - block;
/* find extent for this block */
down_read(&EXT4_I(inode)->i_data_sem);
@@ -1958,7 +1958,7 @@
err = -EIO;
break;
}
- err = func(inode, path, &cbex, ex, cbdata);
+ err = func(inode, next, &cbex, ex, cbdata);
ext4_ext_drop_refs(path);
if (err < 0)
@@ -2020,7 +2020,7 @@
if (ex == NULL) {
/* there is no extent yet, so gap is [0;-] */
lblock = 0;
- len = EXT_MAX_BLOCK;
+ len = EXT_MAX_BLOCKS;
ext_debug("cache gap(whole file):");
} else if (block < le32_to_cpu(ex->ee_block)) {
lblock = block;
@@ -2350,7 +2350,7 @@
* never happen because at least one of the end points
* needs to be on the edge of the extent.
*/
- if (end == EXT_MAX_BLOCK) {
+ if (end == EXT_MAX_BLOCKS - 1) {
ext_debug(" bad truncate %u:%u\n",
start, end);
block = 0;
@@ -2398,7 +2398,7 @@
* If this is a truncate, this condition
* should never happen
*/
- if (end == EXT_MAX_BLOCK) {
+ if (end == EXT_MAX_BLOCKS - 1) {
ext_debug(" bad truncate %u:%u\n",
start, end);
err = -EIO;
@@ -2478,7 +2478,7 @@
* we need to remove it from the leaf
*/
if (num == 0) {
- if (end != EXT_MAX_BLOCK) {
+ if (end != EXT_MAX_BLOCKS - 1) {
/*
* For hole punching, we need to scoot all the
* extents up when an extent is removed so that
@@ -3699,7 +3699,7 @@
last_block = (inode->i_size + sb->s_blocksize - 1)
>> EXT4_BLOCK_SIZE_BITS(sb);
- err = ext4_ext_remove_space(inode, last_block, EXT_MAX_BLOCK);
+ err = ext4_ext_remove_space(inode, last_block, EXT_MAX_BLOCKS - 1);
/* In a multi-transaction truncate, we only make the final
* transaction synchronous.
@@ -3914,14 +3914,13 @@
/*
* Callback function called for each extent to gather FIEMAP information.
*/
-static int ext4_ext_fiemap_cb(struct inode *inode, struct ext4_ext_path *path,
+static int ext4_ext_fiemap_cb(struct inode *inode, ext4_lblk_t next,
struct ext4_ext_cache *newex, struct ext4_extent *ex,
void *data)
{
__u64 logical;
__u64 physical;
__u64 length;
- loff_t size;
__u32 flags = 0;
int ret = 0;
struct fiemap_extent_info *fieinfo = data;
@@ -4103,8 +4102,7 @@
if (ex && ext4_ext_is_uninitialized(ex))
flags |= FIEMAP_EXTENT_UNWRITTEN;
- size = i_size_read(inode);
- if (logical + length >= size)
+ if (next == EXT_MAX_BLOCKS)
flags |= FIEMAP_EXTENT_LAST;
ret = fiemap_fill_next_extent(fieinfo, logical, physical,
@@ -4347,8 +4345,8 @@
start_blk = start >> inode->i_sb->s_blocksize_bits;
last_blk = (start + len - 1) >> inode->i_sb->s_blocksize_bits;
- if (last_blk >= EXT_MAX_BLOCK)
- last_blk = EXT_MAX_BLOCK-1;
+ if (last_blk >= EXT_MAX_BLOCKS)
+ last_blk = EXT_MAX_BLOCKS-1;
len_blks = ((ext4_lblk_t) last_blk) - start_blk + 1;
/*
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index a5763e3..e3126c0 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2634,7 +2634,7 @@
struct buffer_head *page_bufs = NULL;
struct inode *inode = page->mapping->host;
- trace_ext4_writepage(inode, page);
+ trace_ext4_writepage(page);
size = i_size_read(inode);
if (page->index == size >> PAGE_CACHE_SHIFT)
len = size & ~PAGE_CACHE_MASK;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 859f2ae..6ed859d 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -3578,8 +3578,8 @@
free += next - bit;
trace_ext4_mballoc_discard(sb, NULL, group, bit, next - bit);
- trace_ext4_mb_release_inode_pa(sb, pa->pa_inode, pa,
- grp_blk_start + bit, next - bit);
+ trace_ext4_mb_release_inode_pa(pa, grp_blk_start + bit,
+ next - bit);
mb_free_blocks(pa->pa_inode, e4b, bit, next - bit);
bit = next + 1;
}
@@ -3608,7 +3608,7 @@
ext4_group_t group;
ext4_grpblk_t bit;
- trace_ext4_mb_release_group_pa(sb, pa);
+ trace_ext4_mb_release_group_pa(pa);
BUG_ON(pa->pa_deleted == 0);
ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit);
BUG_ON(group != e4b->bd_group && pa->pa_len != 0);
@@ -4448,7 +4448,7 @@
* @inode: inode
* @block: start physical block to free
* @count: number of blocks to count
- * @metadata: Are these metadata blocks
+ * @flags: flags used by ext4_free_blocks
*/
void ext4_free_blocks(handle_t *handle, struct inode *inode,
struct buffer_head *bh, ext4_fsblk_t block,
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index 2b8304b..f57455a 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -1002,12 +1002,12 @@
return -EINVAL;
}
- if ((orig_start > EXT_MAX_BLOCK) ||
- (donor_start > EXT_MAX_BLOCK) ||
- (*len > EXT_MAX_BLOCK) ||
- (orig_start + *len > EXT_MAX_BLOCK)) {
+ if ((orig_start >= EXT_MAX_BLOCKS) ||
+ (donor_start >= EXT_MAX_BLOCKS) ||
+ (*len > EXT_MAX_BLOCKS) ||
+ (orig_start + *len >= EXT_MAX_BLOCKS)) {
ext4_debug("ext4 move extent: Can't handle over [%u] blocks "
- "[ino:orig %lu, donor %lu]\n", EXT_MAX_BLOCK,
+ "[ino:orig %lu, donor %lu]\n", EXT_MAX_BLOCKS,
orig_inode->i_ino, donor_inode->i_ino);
return -EINVAL;
}
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index cc5c157..9ea71aa 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2243,6 +2243,12 @@
* in the vfs. ext4 inode has 48 bits of i_block in fsblock units,
* so that won't be a limiting factor.
*
+ * However there is other limiting factor. We do store extents in the form
+ * of starting block and length, hence the resulting length of the extent
+ * covering maximum file size must fit into on-disk format containers as
+ * well. Given that length is always by 1 unit bigger than max unit (because
+ * we count 0 as well) we have to lower the s_maxbytes by one fs block.
+ *
* Note, this does *not* consider any metadata overhead for vfs i_blocks.
*/
static loff_t ext4_max_size(int blkbits, int has_huge_files)
@@ -2264,10 +2270,13 @@
upper_limit <<= blkbits;
}
- /* 32-bit extent-start container, ee_block */
- res = 1LL << 32;
+ /*
+ * 32-bit extent-start container, ee_block. We lower the maxbytes
+ * by one fs block, so ee_len can cover the extent of maximum file
+ * size
+ */
+ res = (1LL << 32) - 1;
res <<= blkbits;
- res -= 1;
/* Sanity check against vm- & vfs- imposed limits */
if (res > upper_limit)
diff --git a/fs/fat/file.c b/fs/fat/file.c
index 7257752..7018e1d 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -102,7 +102,7 @@
if (attr & ATTR_SYS)
inode->i_flags |= S_IMMUTABLE;
else
- inode->i_flags &= S_IMMUTABLE;
+ inode->i_flags &= ~S_IMMUTABLE;
}
fat_save_attrs(inode, attr);
diff --git a/fs/fscache/page.c b/fs/fscache/page.c
index a2a5d19..3f7a59b 100644
--- a/fs/fscache/page.c
+++ b/fs/fscache/page.c
@@ -954,3 +954,43 @@
pagevec_reinit(pagevec);
}
EXPORT_SYMBOL(fscache_mark_pages_cached);
+
+/*
+ * Uncache all the pages in an inode that are marked PG_fscache, assuming them
+ * to be associated with the given cookie.
+ */
+void __fscache_uncache_all_inode_pages(struct fscache_cookie *cookie,
+ struct inode *inode)
+{
+ struct address_space *mapping = inode->i_mapping;
+ struct pagevec pvec;
+ pgoff_t next;
+ int i;
+
+ _enter("%p,%p", cookie, inode);
+
+ if (!mapping || mapping->nrpages == 0) {
+ _leave(" [no pages]");
+ return;
+ }
+
+ pagevec_init(&pvec, 0);
+ next = 0;
+ do {
+ if (!pagevec_lookup(&pvec, mapping, next, PAGEVEC_SIZE))
+ break;
+ for (i = 0; i < pagevec_count(&pvec); i++) {
+ struct page *page = pvec.pages[i];
+ next = page->index;
+ if (PageFsCache(page)) {
+ __fscache_wait_on_page_write(cookie, page);
+ __fscache_uncache_page(cookie, page);
+ }
+ }
+ pagevec_release(&pvec);
+ cond_resched();
+ } while (++next);
+
+ _leave("");
+}
+EXPORT_SYMBOL(__fscache_uncache_all_inode_pages);
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index cc6ec4b..38f84cd 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -921,6 +921,8 @@
if (sb->s_flags & MS_MANDLOCK)
goto err;
+ sb->s_flags &= ~MS_NOSEC;
+
if (!parse_fuse_opt((char *) data, &d, is_bdev))
goto err;
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 802ac5e..f9fbbe9 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -1069,6 +1069,7 @@
return 0;
gfs2_log_lock(sdp);
+ spin_lock(&sdp->sd_ail_lock);
head = bh = page_buffers(page);
do {
if (atomic_read(&bh->b_count))
@@ -1080,6 +1081,7 @@
goto not_possible;
bh = bh->b_this_page;
} while(bh != head);
+ spin_unlock(&sdp->sd_ail_lock);
gfs2_log_unlock(sdp);
head = bh = page_buffers(page);
@@ -1112,6 +1114,7 @@
WARN_ON(buffer_dirty(bh));
WARN_ON(buffer_pinned(bh));
cannot_release:
+ spin_unlock(&sdp->sd_ail_lock);
gfs2_log_unlock(sdp);
return 0;
}
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 2792a79..1c1336e 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -663,14 +663,19 @@
drop_ref = 1;
}
spin_lock(&gl->gl_spin);
- if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
+ if (test_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
gl->gl_state != LM_ST_UNLOCKED &&
gl->gl_demote_state != LM_ST_EXCLUSIVE) {
unsigned long holdtime, now = jiffies;
+
holdtime = gl->gl_tchange + gl->gl_ops->go_min_hold_time;
if (time_before(now, holdtime))
delay = holdtime - now;
- set_bit(delay ? GLF_PENDING_DEMOTE : GLF_DEMOTE, &gl->gl_flags);
+
+ if (!delay) {
+ clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags);
+ set_bit(GLF_DEMOTE, &gl->gl_flags);
+ }
}
run_queue(gl, 0);
spin_unlock(&gl->gl_spin);
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index 8ef70f4..2cca2931 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -47,10 +47,10 @@
bd_ail_gl_list);
bh = bd->bd_bh;
gfs2_remove_from_ail(bd);
- spin_unlock(&sdp->sd_ail_lock);
-
bd->bd_bh = NULL;
bh->b_private = NULL;
+ spin_unlock(&sdp->sd_ail_lock);
+
bd->bd_blkno = bh->b_blocknr;
gfs2_log_lock(sdp);
gfs2_assert_withdraw(sdp, !buffer_busy(bh));
@@ -221,8 +221,10 @@
}
}
- if (ip == GFS2_I(gl->gl_sbd->sd_rindex))
+ if (ip == GFS2_I(gl->gl_sbd->sd_rindex)) {
+ gfs2_log_flush(gl->gl_sbd, NULL);
gl->gl_sbd->sd_rindex_uptodate = 0;
+ }
if (ip && S_ISREG(ip->i_inode.i_mode))
truncate_inode_pages(ip->i_inode.i_mapping, 0);
}
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 0a064e9..81206e7 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -17,6 +17,7 @@
#include <linux/buffer_head.h>
#include <linux/rcupdate.h>
#include <linux/rculist_bl.h>
+#include <linux/completion.h>
#define DIO_WAIT 0x00000010
#define DIO_METADATA 0x00000020
@@ -546,6 +547,7 @@
struct gfs2_glock *sd_trans_gl;
wait_queue_head_t sd_glock_wait;
atomic_t sd_glock_disposal;
+ struct completion sd_locking_init;
/* Inode Stuff */
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index 903115f..85c6292 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -903,6 +903,7 @@
if (gfs2_ail1_empty(sdp))
break;
}
+ gfs2_log_flush(sdp, NULL);
}
static inline int gfs2_jrnl_flush_reqd(struct gfs2_sbd *sdp)
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 8ac9ae1..2a77071 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -72,6 +72,7 @@
init_waitqueue_head(&sdp->sd_glock_wait);
atomic_set(&sdp->sd_glock_disposal, 0);
+ init_completion(&sdp->sd_locking_init);
spin_lock_init(&sdp->sd_statfs_spin);
spin_lock_init(&sdp->sd_rindex_spin);
@@ -1017,11 +1018,13 @@
fsname++;
if (lm->lm_mount == NULL) {
fs_info(sdp, "Now mounting FS...\n");
+ complete(&sdp->sd_locking_init);
return 0;
}
ret = lm->lm_mount(sdp, fsname);
if (ret == 0)
fs_info(sdp, "Joined cluster. Now mounting FS...\n");
+ complete(&sdp->sd_locking_init);
return ret;
}
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index ed540e7..fb0edf7 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -757,13 +757,17 @@
struct timespec atime;
struct gfs2_dinode *di;
int ret = -EAGAIN;
+ int unlock_required = 0;
/* Skip timestamp update, if this is from a memalloc */
if (current->flags & PF_MEMALLOC)
goto do_flush;
- ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
- if (ret)
- goto do_flush;
+ if (!gfs2_glock_is_locked_by_me(ip->i_gl)) {
+ ret = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
+ if (ret)
+ goto do_flush;
+ unlock_required = 1;
+ }
ret = gfs2_trans_begin(sdp, RES_DINODE, 0);
if (ret)
goto do_unlock;
@@ -780,7 +784,8 @@
}
gfs2_trans_end(sdp);
do_unlock:
- gfs2_glock_dq_uninit(&gh);
+ if (unlock_required)
+ gfs2_glock_dq_uninit(&gh);
do_flush:
if (wbc->sync_mode == WB_SYNC_ALL)
gfs2_log_flush(GFS2_SB(inode), ip->i_gl);
@@ -1427,7 +1432,20 @@
return error;
}
-/*
+/**
+ * gfs2_evict_inode - Remove an inode from cache
+ * @inode: The inode to evict
+ *
+ * There are three cases to consider:
+ * 1. i_nlink == 0, we are final opener (and must deallocate)
+ * 2. i_nlink == 0, we are not the final opener (and cannot deallocate)
+ * 3. i_nlink > 0
+ *
+ * If the fs is read only, then we have to treat all cases as per #3
+ * since we are unable to do any deallocation. The inode will be
+ * deallocated by the next read/write node to attempt an allocation
+ * in the same resource group
+ *
* We have to (at the moment) hold the inodes main lock to cover
* the gap between unlocking the shared lock on the iopen lock and
* taking the exclusive lock. I'd rather do a shared -> exclusive
@@ -1470,6 +1488,8 @@
if (error)
goto out_truncate;
+ /* Case 1 starts here */
+
if (S_ISDIR(inode->i_mode) &&
(ip->i_diskflags & GFS2_DIF_EXHASH)) {
error = gfs2_dir_exhash_dealloc(ip);
@@ -1493,13 +1513,16 @@
goto out_unlock;
out_truncate:
+ /* Case 2 starts here */
error = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
if (error)
goto out_unlock;
- gfs2_final_release_pages(ip);
+ /* Needs to be done before glock release & also in a transaction */
+ truncate_inode_pages(&inode->i_data, 0);
gfs2_trans_end(sdp);
out_unlock:
+ /* Error path for case 1 */
if (test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags))
gfs2_glock_dq(&ip->i_iopen_gh);
gfs2_holder_uninit(&ip->i_iopen_gh);
@@ -1507,6 +1530,7 @@
if (error && error != GLR_TRYFAILED && error != -EROFS)
fs_warn(sdp, "gfs2_evict_inode: %d\n", error);
out:
+ /* Case 3 starts here */
truncate_inode_pages(&inode->i_data, 0);
end_writeback(inode);
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index e20eab3..443cabc 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -338,6 +338,9 @@
rv = sscanf(buf, "%u", &first);
if (rv != 1 || first > 1)
return -EINVAL;
+ rv = wait_for_completion_killable(&sdp->sd_locking_init);
+ if (rv)
+ return rv;
spin_lock(&sdp->sd_jindex_spin);
rv = -EBUSY;
if (test_bit(SDF_NOJOURNALID, &sdp->sd_flags) == 0)
@@ -414,7 +417,9 @@
rv = sscanf(buf, "%d", &jid);
if (rv != 1)
return -EINVAL;
-
+ rv = wait_for_completion_killable(&sdp->sd_locking_init);
+ if (rv)
+ return rv;
spin_lock(&sdp->sd_jindex_spin);
rv = -EINVAL;
if (sdp->sd_lockstruct.ls_ops->lm_mount == NULL)
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index b49b555..84a47b7 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -500,7 +500,7 @@
out_put_hidden_dir:
iput(sbi->hidden_dir);
out_put_root:
- iput(sbi->alloc_file);
+ iput(root);
out_put_alloc_file:
iput(sbi->alloc_file);
out_close_cat_tree:
diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c
index 3031d81..4ac88ff 100644
--- a/fs/hfsplus/wrapper.c
+++ b/fs/hfsplus/wrapper.c
@@ -36,6 +36,7 @@
{
DECLARE_COMPLETION_ONSTACK(wait);
struct bio *bio;
+ int ret = 0;
bio = bio_alloc(GFP_NOIO, 1);
bio->bi_sector = sector;
@@ -54,8 +55,10 @@
wait_for_completion(&wait);
if (!bio_flagged(bio, BIO_UPTODATE))
- return -EIO;
- return 0;
+ ret = -EIO;
+
+ bio_put(bio);
+ return ret;
}
static int hfsplus_read_mdb(void *bufptr, struct hfsplus_wd *wd)
diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index 87ed48e..85c098a 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -139,7 +139,8 @@
static struct dentry *hppfs_lookup(struct inode *ino, struct dentry *dentry,
struct nameidata *nd)
{
- struct dentry *proc_dentry, *new, *parent;
+ struct dentry *proc_dentry, *parent;
+ struct qstr *name = &dentry->d_name;
struct inode *inode;
int err, deleted;
@@ -149,23 +150,9 @@
else if (deleted)
return ERR_PTR(-ENOENT);
- err = -ENOMEM;
parent = HPPFS_I(ino)->proc_dentry;
mutex_lock(&parent->d_inode->i_mutex);
- proc_dentry = d_lookup(parent, &dentry->d_name);
- if (proc_dentry == NULL) {
- proc_dentry = d_alloc(parent, &dentry->d_name);
- if (proc_dentry == NULL) {
- mutex_unlock(&parent->d_inode->i_mutex);
- goto out;
- }
- new = (*parent->d_inode->i_op->lookup)(parent->d_inode,
- proc_dentry, NULL);
- if (new) {
- dput(proc_dentry);
- proc_dentry = new;
- }
- }
+ proc_dentry = lookup_one_len(name->name, parent, name->len);
mutex_unlock(&parent->d_inode->i_mutex);
if (IS_ERR(proc_dentry))
@@ -174,13 +161,11 @@
err = -ENOMEM;
inode = get_inode(ino->i_sb, proc_dentry);
if (!inode)
- goto out_dput;
+ goto out;
d_add(dentry, inode);
return NULL;
- out_dput:
- dput(proc_dentry);
out:
return ERR_PTR(err);
}
@@ -690,8 +675,10 @@
struct inode *proc_ino = dentry->d_inode;
struct inode *inode = new_inode(sb);
- if (!inode)
+ if (!inode) {
+ dput(dentry);
return ERR_PTR(-ENOMEM);
+ }
if (S_ISDIR(dentry->d_inode->i_mode)) {
inode->i_op = &hppfs_dir_iops;
@@ -704,7 +691,7 @@
inode->i_fop = &hppfs_file_fops;
}
- HPPFS_I(inode)->proc_dentry = dget(dentry);
+ HPPFS_I(inode)->proc_dentry = dentry;
inode->i_uid = proc_ino->i_uid;
inode->i_gid = proc_ino->i_gid;
@@ -737,7 +724,7 @@
sb->s_fs_info = proc_mnt;
err = -ENOMEM;
- root_inode = get_inode(sb, proc_mnt->mnt_sb->s_root);
+ root_inode = get_inode(sb, dget(proc_mnt->mnt_sb->s_root));
if (!root_inode)
goto out_mntput;
diff --git a/fs/inode.c b/fs/inode.c
index 0f7e88a..43566d1 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -423,7 +423,14 @@
void end_writeback(struct inode *inode)
{
might_sleep();
+ /*
+ * We have to cycle tree_lock here because reclaim can be still in the
+ * process of removing the last page (in __delete_from_page_cache())
+ * and we must not free mapping under it.
+ */
+ spin_lock_irq(&inode->i_data.tree_lock);
BUG_ON(inode->i_data.nrpages);
+ spin_unlock_irq(&inode->i_data.tree_lock);
BUG_ON(!list_empty(&inode->i_data.private_list));
BUG_ON(!(inode->i_state & I_FREEING));
BUG_ON(inode->i_state & I_CLEAR);
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index 3db5ba4..b3cc858 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -974,7 +974,7 @@
out_no_read:
printk(KERN_WARNING "%s: bread failed, dev=%s, iso_blknum=%d, block=%d\n",
__func__, s->s_id, iso_blknum, block);
- goto out_freesbi;
+ goto out_freebh;
out_bad_zone_size:
printk(KERN_WARNING "ISOFS: Bad logical zone size %ld\n",
sbi->s_log_zone_size);
@@ -989,6 +989,7 @@
out_freebh:
brelse(bh);
+ brelse(pri_bh);
out_freesbi:
kfree(opt.iocharset);
kfree(sbi);
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index 6a79fd0..2c62c5a 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -97,10 +97,14 @@
if (jh->b_jlist == BJ_None && !buffer_locked(bh) &&
!buffer_dirty(bh) && !buffer_write_io_error(bh)) {
+ /*
+ * Get our reference so that bh cannot be freed before
+ * we unlock it
+ */
+ get_bh(bh);
JBUFFER_TRACE(jh, "remove from checkpoint list");
ret = __jbd2_journal_remove_checkpoint(jh) + 1;
jbd_unlock_bh_state(bh);
- jbd2_journal_remove_journal_head(bh);
BUFFER_TRACE(bh, "release");
__brelse(bh);
} else {
@@ -223,8 +227,8 @@
spin_lock(&journal->j_list_lock);
goto restart;
}
+ get_bh(bh);
if (buffer_locked(bh)) {
- atomic_inc(&bh->b_count);
spin_unlock(&journal->j_list_lock);
jbd_unlock_bh_state(bh);
wait_on_buffer(bh);
@@ -243,7 +247,6 @@
*/
released = __jbd2_journal_remove_checkpoint(jh);
jbd_unlock_bh_state(bh);
- jbd2_journal_remove_journal_head(bh);
__brelse(bh);
}
@@ -284,7 +287,7 @@
int ret = 0;
if (buffer_locked(bh)) {
- atomic_inc(&bh->b_count);
+ get_bh(bh);
spin_unlock(&journal->j_list_lock);
jbd_unlock_bh_state(bh);
wait_on_buffer(bh);
@@ -316,12 +319,12 @@
ret = 1;
if (unlikely(buffer_write_io_error(bh)))
ret = -EIO;
+ get_bh(bh);
J_ASSERT_JH(jh, !buffer_jbddirty(bh));
BUFFER_TRACE(bh, "remove from checkpoint");
__jbd2_journal_remove_checkpoint(jh);
spin_unlock(&journal->j_list_lock);
jbd_unlock_bh_state(bh);
- jbd2_journal_remove_journal_head(bh);
__brelse(bh);
} else {
/*
@@ -554,7 +557,8 @@
/*
* journal_clean_one_cp_list
*
- * Find all the written-back checkpoint buffers in the given list and release them.
+ * Find all the written-back checkpoint buffers in the given list and
+ * release them.
*
* Called with the journal locked.
* Called with j_list_lock held.
@@ -663,8 +667,8 @@
* checkpoint lists.
*
* The function returns 1 if it frees the transaction, 0 otherwise.
+ * The function can free jh and bh.
*
- * This function is called with the journal locked.
* This function is called with j_list_lock held.
* This function is called with jbd_lock_bh_state(jh2bh(jh))
*/
@@ -684,13 +688,14 @@
}
journal = transaction->t_journal;
+ JBUFFER_TRACE(jh, "removing from transaction");
__buffer_unlink(jh);
jh->b_cp_transaction = NULL;
+ jbd2_journal_put_journal_head(jh);
if (transaction->t_checkpoint_list != NULL ||
transaction->t_checkpoint_io_list != NULL)
goto out;
- JBUFFER_TRACE(jh, "transaction has no more buffers");
/*
* There is one special case to worry about: if we have just pulled the
@@ -701,10 +706,8 @@
* The locking here around t_state is a bit sleazy.
* See the comment at the end of jbd2_journal_commit_transaction().
*/
- if (transaction->t_state != T_FINISHED) {
- JBUFFER_TRACE(jh, "belongs to running/committing transaction");
+ if (transaction->t_state != T_FINISHED)
goto out;
- }
/* OK, that was the last buffer for the transaction: we can now
safely remove this transaction from the log */
@@ -723,7 +726,6 @@
wake_up(&journal->j_wait_logspace);
ret = 1;
out:
- JBUFFER_TRACE(jh, "exit");
return ret;
}
@@ -742,6 +744,8 @@
J_ASSERT_JH(jh, buffer_dirty(jh2bh(jh)) || buffer_jbddirty(jh2bh(jh)));
J_ASSERT_JH(jh, jh->b_cp_transaction == NULL);
+ /* Get reference for checkpointing transaction */
+ jbd2_journal_grab_journal_head(jh2bh(jh));
jh->b_cp_transaction = transaction;
if (!transaction->t_checkpoint_list) {
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 7f21cf3..eef6979 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -848,10 +848,16 @@
while (commit_transaction->t_forget) {
transaction_t *cp_transaction;
struct buffer_head *bh;
+ int try_to_free = 0;
jh = commit_transaction->t_forget;
spin_unlock(&journal->j_list_lock);
bh = jh2bh(jh);
+ /*
+ * Get a reference so that bh cannot be freed before we are
+ * done with it.
+ */
+ get_bh(bh);
jbd_lock_bh_state(bh);
J_ASSERT_JH(jh, jh->b_transaction == commit_transaction);
@@ -914,28 +920,27 @@
__jbd2_journal_insert_checkpoint(jh, commit_transaction);
if (is_journal_aborted(journal))
clear_buffer_jbddirty(bh);
- JBUFFER_TRACE(jh, "refile for checkpoint writeback");
- __jbd2_journal_refile_buffer(jh);
- jbd_unlock_bh_state(bh);
} else {
J_ASSERT_BH(bh, !buffer_dirty(bh));
- /* The buffer on BJ_Forget list and not jbddirty means
+ /*
+ * The buffer on BJ_Forget list and not jbddirty means
* it has been freed by this transaction and hence it
* could not have been reallocated until this
* transaction has committed. *BUT* it could be
* reallocated once we have written all the data to
* disk and before we process the buffer on BJ_Forget
- * list. */
- JBUFFER_TRACE(jh, "refile or unfile freed buffer");
- __jbd2_journal_refile_buffer(jh);
- if (!jh->b_transaction) {
- jbd_unlock_bh_state(bh);
- /* needs a brelse */
- jbd2_journal_remove_journal_head(bh);
- release_buffer_page(bh);
- } else
- jbd_unlock_bh_state(bh);
+ * list.
+ */
+ if (!jh->b_next_transaction)
+ try_to_free = 1;
}
+ JBUFFER_TRACE(jh, "refile or unfile buffer");
+ __jbd2_journal_refile_buffer(jh);
+ jbd_unlock_bh_state(bh);
+ if (try_to_free)
+ release_buffer_page(bh); /* Drops bh reference */
+ else
+ __brelse(bh);
cond_resched_lock(&journal->j_list_lock);
}
spin_unlock(&journal->j_list_lock);
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 9a78269..0dfa5b59 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -2078,10 +2078,9 @@
* When a buffer has its BH_JBD bit set it is immune from being released by
* core kernel code, mainly via ->b_count.
*
- * A journal_head may be detached from its buffer_head when the journal_head's
- * b_transaction, b_cp_transaction and b_next_transaction pointers are NULL.
- * Various places in JBD call jbd2_journal_remove_journal_head() to indicate that the
- * journal_head can be dropped if needed.
+ * A journal_head is detached from its buffer_head when the journal_head's
+ * b_jcount reaches zero. Running transaction (b_transaction) and checkpoint
+ * transaction (b_cp_transaction) hold their references to b_jcount.
*
* Various places in the kernel want to attach a journal_head to a buffer_head
* _before_ attaching the journal_head to a transaction. To protect the
@@ -2094,17 +2093,16 @@
* (Attach a journal_head if needed. Increments b_jcount)
* struct journal_head *jh = jbd2_journal_add_journal_head(bh);
* ...
+ * (Get another reference for transaction)
+ * jbd2_journal_grab_journal_head(bh);
* jh->b_transaction = xxx;
+ * (Put original reference)
* jbd2_journal_put_journal_head(jh);
- *
- * Now, the journal_head's b_jcount is zero, but it is safe from being released
- * because it has a non-zero b_transaction.
*/
/*
* Give a buffer_head a journal_head.
*
- * Doesn't need the journal lock.
* May sleep.
*/
struct journal_head *jbd2_journal_add_journal_head(struct buffer_head *bh)
@@ -2168,61 +2166,29 @@
struct journal_head *jh = bh2jh(bh);
J_ASSERT_JH(jh, jh->b_jcount >= 0);
-
- get_bh(bh);
- if (jh->b_jcount == 0) {
- if (jh->b_transaction == NULL &&
- jh->b_next_transaction == NULL &&
- jh->b_cp_transaction == NULL) {
- J_ASSERT_JH(jh, jh->b_jlist == BJ_None);
- J_ASSERT_BH(bh, buffer_jbd(bh));
- J_ASSERT_BH(bh, jh2bh(jh) == bh);
- BUFFER_TRACE(bh, "remove journal_head");
- if (jh->b_frozen_data) {
- printk(KERN_WARNING "%s: freeing "
- "b_frozen_data\n",
- __func__);
- jbd2_free(jh->b_frozen_data, bh->b_size);
- }
- if (jh->b_committed_data) {
- printk(KERN_WARNING "%s: freeing "
- "b_committed_data\n",
- __func__);
- jbd2_free(jh->b_committed_data, bh->b_size);
- }
- bh->b_private = NULL;
- jh->b_bh = NULL; /* debug, really */
- clear_buffer_jbd(bh);
- __brelse(bh);
- journal_free_journal_head(jh);
- } else {
- BUFFER_TRACE(bh, "journal_head was locked");
- }
+ J_ASSERT_JH(jh, jh->b_transaction == NULL);
+ J_ASSERT_JH(jh, jh->b_next_transaction == NULL);
+ J_ASSERT_JH(jh, jh->b_cp_transaction == NULL);
+ J_ASSERT_JH(jh, jh->b_jlist == BJ_None);
+ J_ASSERT_BH(bh, buffer_jbd(bh));
+ J_ASSERT_BH(bh, jh2bh(jh) == bh);
+ BUFFER_TRACE(bh, "remove journal_head");
+ if (jh->b_frozen_data) {
+ printk(KERN_WARNING "%s: freeing b_frozen_data\n", __func__);
+ jbd2_free(jh->b_frozen_data, bh->b_size);
}
+ if (jh->b_committed_data) {
+ printk(KERN_WARNING "%s: freeing b_committed_data\n", __func__);
+ jbd2_free(jh->b_committed_data, bh->b_size);
+ }
+ bh->b_private = NULL;
+ jh->b_bh = NULL; /* debug, really */
+ clear_buffer_jbd(bh);
+ journal_free_journal_head(jh);
}
/*
- * jbd2_journal_remove_journal_head(): if the buffer isn't attached to a transaction
- * and has a zero b_jcount then remove and release its journal_head. If we did
- * see that the buffer is not used by any transaction we also "logically"
- * decrement ->b_count.
- *
- * We in fact take an additional increment on ->b_count as a convenience,
- * because the caller usually wants to do additional things with the bh
- * after calling here.
- * The caller of jbd2_journal_remove_journal_head() *must* run __brelse(bh) at some
- * time. Once the caller has run __brelse(), the buffer is eligible for
- * reaping by try_to_free_buffers().
- */
-void jbd2_journal_remove_journal_head(struct buffer_head *bh)
-{
- jbd_lock_bh_journal_head(bh);
- __journal_remove_journal_head(bh);
- jbd_unlock_bh_journal_head(bh);
-}
-
-/*
- * Drop a reference on the passed journal_head. If it fell to zero then try to
+ * Drop a reference on the passed journal_head. If it fell to zero then
* release the journal_head from the buffer_head.
*/
void jbd2_journal_put_journal_head(struct journal_head *jh)
@@ -2232,11 +2198,12 @@
jbd_lock_bh_journal_head(bh);
J_ASSERT_JH(jh, jh->b_jcount > 0);
--jh->b_jcount;
- if (!jh->b_jcount && !jh->b_transaction) {
+ if (!jh->b_jcount) {
__journal_remove_journal_head(bh);
+ jbd_unlock_bh_journal_head(bh);
__brelse(bh);
- }
- jbd_unlock_bh_journal_head(bh);
+ } else
+ jbd_unlock_bh_journal_head(bh);
}
/*
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 3eec82d..2d71094 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -30,6 +30,7 @@
#include <linux/module.h>
static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh);
+static void __jbd2_journal_unfile_buffer(struct journal_head *jh);
/*
* jbd2_get_transaction: obtain a new transaction_t object.
@@ -764,7 +765,6 @@
if (!jh->b_transaction) {
JBUFFER_TRACE(jh, "no transaction");
J_ASSERT_JH(jh, !jh->b_next_transaction);
- jh->b_transaction = transaction;
JBUFFER_TRACE(jh, "file as BJ_Reserved");
spin_lock(&journal->j_list_lock);
__jbd2_journal_file_buffer(jh, transaction, BJ_Reserved);
@@ -814,7 +814,6 @@
* int jbd2_journal_get_write_access() - notify intent to modify a buffer for metadata (not data) update.
* @handle: transaction to add buffer modifications to
* @bh: bh to be used for metadata writes
- * @credits: variable that will receive credits for the buffer
*
* Returns an error code or 0 on success.
*
@@ -896,8 +895,6 @@
* committed and so it's safe to clear the dirty bit.
*/
clear_buffer_dirty(jh2bh(jh));
- jh->b_transaction = transaction;
-
/* first access by this transaction */
jh->b_modified = 0;
@@ -932,7 +929,6 @@
* non-rewindable consequences
* @handle: transaction
* @bh: buffer to undo
- * @credits: store the number of taken credits here (if not NULL)
*
* Sometimes there is a need to distinguish between metadata which has
* been committed to disk and that which has not. The ext3fs code uses
@@ -1232,8 +1228,6 @@
__jbd2_journal_file_buffer(jh, transaction, BJ_Forget);
} else {
__jbd2_journal_unfile_buffer(jh);
- jbd2_journal_remove_journal_head(bh);
- __brelse(bh);
if (!buffer_jbd(bh)) {
spin_unlock(&journal->j_list_lock);
jbd_unlock_bh_state(bh);
@@ -1556,19 +1550,32 @@
mark_buffer_dirty(bh); /* Expose it to the VM */
}
-void __jbd2_journal_unfile_buffer(struct journal_head *jh)
+/*
+ * Remove buffer from all transactions.
+ *
+ * Called with bh_state lock and j_list_lock
+ *
+ * jh and bh may be already freed when this function returns.
+ */
+static void __jbd2_journal_unfile_buffer(struct journal_head *jh)
{
__jbd2_journal_temp_unlink_buffer(jh);
jh->b_transaction = NULL;
+ jbd2_journal_put_journal_head(jh);
}
void jbd2_journal_unfile_buffer(journal_t *journal, struct journal_head *jh)
{
- jbd_lock_bh_state(jh2bh(jh));
+ struct buffer_head *bh = jh2bh(jh);
+
+ /* Get reference so that buffer cannot be freed before we unlock it */
+ get_bh(bh);
+ jbd_lock_bh_state(bh);
spin_lock(&journal->j_list_lock);
__jbd2_journal_unfile_buffer(jh);
spin_unlock(&journal->j_list_lock);
- jbd_unlock_bh_state(jh2bh(jh));
+ jbd_unlock_bh_state(bh);
+ __brelse(bh);
}
/*
@@ -1595,8 +1602,6 @@
if (jh->b_jlist == BJ_None) {
JBUFFER_TRACE(jh, "remove from checkpoint list");
__jbd2_journal_remove_checkpoint(jh);
- jbd2_journal_remove_journal_head(bh);
- __brelse(bh);
}
}
spin_unlock(&journal->j_list_lock);
@@ -1659,7 +1664,6 @@
/*
* We take our own ref against the journal_head here to avoid
* having to add tons of locking around each instance of
- * jbd2_journal_remove_journal_head() and
* jbd2_journal_put_journal_head().
*/
jh = jbd2_journal_grab_journal_head(bh);
@@ -1697,10 +1701,9 @@
int may_free = 1;
struct buffer_head *bh = jh2bh(jh);
- __jbd2_journal_unfile_buffer(jh);
-
if (jh->b_cp_transaction) {
JBUFFER_TRACE(jh, "on running+cp transaction");
+ __jbd2_journal_temp_unlink_buffer(jh);
/*
* We don't want to write the buffer anymore, clear the
* bit so that we don't confuse checks in
@@ -1711,8 +1714,7 @@
may_free = 0;
} else {
JBUFFER_TRACE(jh, "on running transaction");
- jbd2_journal_remove_journal_head(bh);
- __brelse(bh);
+ __jbd2_journal_unfile_buffer(jh);
}
return may_free;
}
@@ -1990,6 +1992,8 @@
if (jh->b_transaction)
__jbd2_journal_temp_unlink_buffer(jh);
+ else
+ jbd2_journal_grab_journal_head(bh);
jh->b_transaction = transaction;
switch (jlist) {
@@ -2041,9 +2045,10 @@
* already started to be used by a subsequent transaction, refile the
* buffer on that transaction's metadata list.
*
- * Called under journal->j_list_lock
- *
+ * Called under j_list_lock
* Called under jbd_lock_bh_state(jh2bh(jh))
+ *
+ * jh and bh may be already free when this function returns
*/
void __jbd2_journal_refile_buffer(struct journal_head *jh)
{
@@ -2067,6 +2072,11 @@
was_dirty = test_clear_buffer_jbddirty(bh);
__jbd2_journal_temp_unlink_buffer(jh);
+ /*
+ * We set b_transaction here because b_next_transaction will inherit
+ * our jh reference and thus __jbd2_journal_file_buffer() must not
+ * take a new one.
+ */
jh->b_transaction = jh->b_next_transaction;
jh->b_next_transaction = NULL;
if (buffer_freed(bh))
@@ -2083,30 +2093,21 @@
}
/*
- * For the unlocked version of this call, also make sure that any
- * hanging journal_head is cleaned up if necessary.
+ * __jbd2_journal_refile_buffer() with necessary locking added. We take our
+ * bh reference so that we can safely unlock bh.
*
- * __jbd2_journal_refile_buffer is usually called as part of a single locked
- * operation on a buffer_head, in which the caller is probably going to
- * be hooking the journal_head onto other lists. In that case it is up
- * to the caller to remove the journal_head if necessary. For the
- * unlocked jbd2_journal_refile_buffer call, the caller isn't going to be
- * doing anything else to the buffer so we need to do the cleanup
- * ourselves to avoid a jh leak.
- *
- * *** The journal_head may be freed by this call! ***
+ * The jh and bh may be freed by this call.
*/
void jbd2_journal_refile_buffer(journal_t *journal, struct journal_head *jh)
{
struct buffer_head *bh = jh2bh(jh);
+ /* Get reference so that buffer cannot be freed before we unlock it */
+ get_bh(bh);
jbd_lock_bh_state(bh);
spin_lock(&journal->j_list_lock);
-
__jbd2_journal_refile_buffer(jh);
jbd_unlock_bh_state(bh);
- jbd2_journal_remove_journal_head(bh);
-
spin_unlock(&journal->j_list_lock);
__brelse(bh);
}
diff --git a/fs/jfs/file.c b/fs/jfs/file.c
index c5ce6c1..2f3f531 100644
--- a/fs/jfs/file.c
+++ b/fs/jfs/file.c
@@ -66,9 +66,9 @@
struct jfs_inode_info *ji = JFS_IP(inode);
spin_lock_irq(&ji->ag_lock);
if (ji->active_ag == -1) {
- ji->active_ag = ji->agno;
- atomic_inc(
- &JFS_SBI(inode->i_sb)->bmap->db_active[ji->agno]);
+ struct jfs_sb_info *jfs_sb = JFS_SBI(inode->i_sb);
+ ji->active_ag = BLKTOAG(addressPXD(&ji->ixpxd), jfs_sb);
+ atomic_inc( &jfs_sb->bmap->db_active[ji->active_ag]);
}
spin_unlock_irq(&ji->ag_lock);
}
diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c
index ed53a47..b78b2f9 100644
--- a/fs/jfs/jfs_imap.c
+++ b/fs/jfs/jfs_imap.c
@@ -397,7 +397,7 @@
release_metapage(mp);
/* set the ag for the inode */
- JFS_IP(ip)->agno = BLKTOAG(agstart, sbi);
+ JFS_IP(ip)->agstart = agstart;
JFS_IP(ip)->active_ag = -1;
return (rc);
@@ -901,7 +901,7 @@
/* get the allocation group for this ino.
*/
- agno = JFS_IP(ip)->agno;
+ agno = BLKTOAG(JFS_IP(ip)->agstart, JFS_SBI(ip->i_sb));
/* Lock the AG specific inode map information
*/
@@ -1315,12 +1315,11 @@
static inline void
diInitInode(struct inode *ip, int iagno, int ino, int extno, struct iag * iagp)
{
- struct jfs_sb_info *sbi = JFS_SBI(ip->i_sb);
struct jfs_inode_info *jfs_ip = JFS_IP(ip);
ip->i_ino = (iagno << L2INOSPERIAG) + ino;
jfs_ip->ixpxd = iagp->inoext[extno];
- jfs_ip->agno = BLKTOAG(le64_to_cpu(iagp->agstart), sbi);
+ jfs_ip->agstart = le64_to_cpu(iagp->agstart);
jfs_ip->active_ag = -1;
}
@@ -1379,7 +1378,7 @@
*/
/* get the ag number of this iag */
- agno = JFS_IP(pip)->agno;
+ agno = BLKTOAG(JFS_IP(pip)->agstart, JFS_SBI(pip->i_sb));
if (atomic_read(&JFS_SBI(pip->i_sb)->bmap->db_active[agno])) {
/*
@@ -2921,10 +2920,9 @@
continue;
}
- /* agstart that computes to the same ag is treated as same; */
agstart = le64_to_cpu(iagp->agstart);
- /* iagp->agstart = agstart & ~(mp->db_agsize - 1); */
n = agstart >> mp->db_agl2size;
+ iagp->agstart = cpu_to_le64((s64)n << mp->db_agl2size);
/* compute backed inodes */
numinos = (EXTSPERIAG - le32_to_cpu(iagp->nfreeexts))
diff --git a/fs/jfs/jfs_incore.h b/fs/jfs/jfs_incore.h
index 1439f11..584a4a1 100644
--- a/fs/jfs/jfs_incore.h
+++ b/fs/jfs/jfs_incore.h
@@ -50,8 +50,9 @@
short btindex; /* btpage entry index*/
struct inode *ipimap; /* inode map */
unsigned long cflag; /* commit flags */
+ u64 agstart; /* agstart of the containing IAG */
u16 bxflag; /* xflag of pseudo buffer? */
- unchar agno; /* ag number */
+ unchar pad;
signed char active_ag; /* ag currently allocating from */
lid_t blid; /* lid of pseudo buffer? */
lid_t atlhead; /* anonymous tlock list head */
diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c
index 278e3fb..583636f7 100644
--- a/fs/jfs/jfs_logmgr.c
+++ b/fs/jfs/jfs_logmgr.c
@@ -1123,7 +1123,7 @@
bdev = blkdev_get_by_dev(sbi->logdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL,
log);
if (IS_ERR(bdev)) {
- rc = -PTR_ERR(bdev);
+ rc = PTR_ERR(bdev);
goto free;
}
diff --git a/fs/jfs/resize.c b/fs/jfs/resize.c
index 8ea5efb..8d0c1c7 100644
--- a/fs/jfs/resize.c
+++ b/fs/jfs/resize.c
@@ -80,7 +80,7 @@
int log_formatted = 0;
struct inode *iplist[1];
struct jfs_superblock *j_sb, *j_sb2;
- uint old_agsize;
+ s64 old_agsize;
int agsizechanged = 0;
struct buffer_head *bh, *bh2;
diff --git a/fs/libfs.c b/fs/libfs.c
index c88eab5..275ca474 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -822,7 +822,7 @@
goto out;
attr->set_buf[size] = '\0';
- val = simple_strtol(attr->set_buf, NULL, 0);
+ val = simple_strtoll(attr->set_buf, NULL, 0);
ret = attr->set(attr->data, val);
if (ret == 0)
ret = len; /* on success, claim we got the whole input */
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index adb45ec..e374050 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -708,7 +708,13 @@
if (task->tk_status < 0) {
dprintk("lockd: unlock failed (err = %d)\n", -task->tk_status);
- goto retry_rebind;
+ switch (task->tk_status) {
+ case -EACCES:
+ case -EIO:
+ goto die;
+ default:
+ goto retry_rebind;
+ }
}
if (status == NLM_LCK_DENIED_GRACE_PERIOD) {
rpc_delay(task, NLMCLNT_GRACE_WAIT);
diff --git a/fs/locks.c b/fs/locks.c
index 0a4f50d..b286539 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -160,10 +160,28 @@
static struct kmem_cache *filelock_cache __read_mostly;
+static void locks_init_lock_always(struct file_lock *fl)
+{
+ fl->fl_next = NULL;
+ fl->fl_fasync = NULL;
+ fl->fl_owner = NULL;
+ fl->fl_pid = 0;
+ fl->fl_nspid = NULL;
+ fl->fl_file = NULL;
+ fl->fl_flags = 0;
+ fl->fl_type = 0;
+ fl->fl_start = fl->fl_end = 0;
+}
+
/* Allocate an empty lock structure. */
struct file_lock *locks_alloc_lock(void)
{
- return kmem_cache_alloc(filelock_cache, GFP_KERNEL);
+ struct file_lock *fl = kmem_cache_alloc(filelock_cache, GFP_KERNEL);
+
+ if (fl)
+ locks_init_lock_always(fl);
+
+ return fl;
}
EXPORT_SYMBOL_GPL(locks_alloc_lock);
@@ -200,17 +218,9 @@
INIT_LIST_HEAD(&fl->fl_link);
INIT_LIST_HEAD(&fl->fl_block);
init_waitqueue_head(&fl->fl_wait);
- fl->fl_next = NULL;
- fl->fl_fasync = NULL;
- fl->fl_owner = NULL;
- fl->fl_pid = 0;
- fl->fl_nspid = NULL;
- fl->fl_file = NULL;
- fl->fl_flags = 0;
- fl->fl_type = 0;
- fl->fl_start = fl->fl_end = 0;
fl->fl_ops = NULL;
fl->fl_lmops = NULL;
+ locks_init_lock_always(fl);
}
EXPORT_SYMBOL(locks_init_lock);
diff --git a/fs/logfs/dir.c b/fs/logfs/dir.c
index 9ed89d1..1afae26 100644
--- a/fs/logfs/dir.c
+++ b/fs/logfs/dir.c
@@ -555,13 +555,6 @@
return __logfs_create(dir, dentry, inode, target, destlen);
}
-static int logfs_permission(struct inode *inode, int mask, unsigned int flags)
-{
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
- return generic_permission(inode, mask, flags, NULL);
-}
-
static int logfs_link(struct dentry *old_dentry, struct inode *dir,
struct dentry *dentry)
{
@@ -820,7 +813,6 @@
.mknod = logfs_mknod,
.rename = logfs_rename,
.rmdir = logfs_rmdir,
- .permission = logfs_permission,
.symlink = logfs_symlink,
.unlink = logfs_unlink,
};
diff --git a/fs/namei.c b/fs/namei.c
index e2e4e8d..14ab8d3 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -238,7 +238,8 @@
/*
* Read/write DACs are always overridable.
- * Executable DACs are overridable if at least one exec bit is set.
+ * Executable DACs are overridable for all directories and
+ * for non-directories that have least one exec bit set.
*/
if (!(mask & MAY_EXEC) || execute_ok(inode))
if (ns_capable(inode_userns(inode), CAP_DAC_OVERRIDE))
@@ -432,6 +433,8 @@
goto err_parent;
BUG_ON(nd->inode != parent->d_inode);
} else {
+ if (dentry->d_parent != parent)
+ goto err_parent;
spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
if (!__d_rcu_to_refcount(dentry, nd->seq))
goto err_child;
@@ -812,6 +815,11 @@
if (!mnt) /* mount collision */
return 0;
+ if (!*need_mntput) {
+ /* lock_mount() may release path->mnt on error */
+ mntget(path->mnt);
+ *need_mntput = true;
+ }
err = finish_automount(mnt, path);
switch (err) {
@@ -819,12 +827,9 @@
/* Someone else made a mount here whilst we were busy */
return 0;
case 0:
- dput(path->dentry);
- if (*need_mntput)
- mntput(path->mnt);
+ path_put(path);
path->mnt = mnt;
path->dentry = dget(mnt->mnt_root);
- *need_mntput = true;
return 0;
default:
return err;
@@ -844,9 +849,10 @@
*/
static int follow_managed(struct path *path, unsigned flags)
{
+ struct vfsmount *mnt = path->mnt; /* held by caller, must be left alone */
unsigned managed;
bool need_mntput = false;
- int ret;
+ int ret = 0;
/* Given that we're not holding a lock here, we retain the value in a
* local variable for each dentry as we look at it so that we don't see
@@ -861,7 +867,7 @@
BUG_ON(!path->dentry->d_op->d_manage);
ret = path->dentry->d_op->d_manage(path->dentry, false);
if (ret < 0)
- return ret == -EISDIR ? 0 : ret;
+ break;
}
/* Transit to a mounted filesystem. */
@@ -887,14 +893,19 @@
if (managed & DCACHE_NEED_AUTOMOUNT) {
ret = follow_automount(path, flags, &need_mntput);
if (ret < 0)
- return ret == -EISDIR ? 0 : ret;
+ break;
continue;
}
/* We didn't change the current path point */
break;
}
- return 0;
+
+ if (need_mntput && path->mnt == mnt)
+ mntput(path->mnt);
+ if (ret == -EISDIR)
+ ret = 0;
+ return ret;
}
int follow_down_one(struct path *path)
@@ -931,7 +942,6 @@
* Don't forget we might have a non-mountpoint managed dentry
* that wants to block transit.
*/
- *inode = path->dentry->d_inode;
if (unlikely(managed_dentry_might_block(path->dentry)))
return false;
@@ -944,6 +954,12 @@
path->mnt = mounted;
path->dentry = mounted->mnt_root;
nd->seq = read_seqcount_begin(&path->dentry->d_seq);
+ /*
+ * Update the inode too. We don't need to re-check the
+ * dentry sequence number here after this d_inode read,
+ * because a mount-point is always pinned.
+ */
+ *inode = path->dentry->d_inode;
}
return true;
}
@@ -1003,9 +1019,6 @@
* Follow down to the covering mount currently visible to userspace. At each
* point, the filesystem owning that dentry may be queried as to whether the
* caller is permitted to proceed or not.
- *
- * Care must be taken as namespace_sem may be held (indicated by mounting_here
- * being true).
*/
int follow_down(struct path *path)
{
@@ -2624,6 +2637,10 @@
error = PTR_ERR(dentry);
if (IS_ERR(dentry))
goto exit2;
+ if (!dentry->d_inode) {
+ error = -ENOENT;
+ goto exit3;
+ }
error = mnt_want_write(nd.path.mnt);
if (error)
goto exit3;
@@ -2712,8 +2729,9 @@
if (nd.last.name[nd.last.len])
goto slashes;
inode = dentry->d_inode;
- if (inode)
- ihold(inode);
+ if (!inode)
+ goto slashes;
+ ihold(inode);
error = mnt_want_write(nd.path.mnt);
if (error)
goto exit2;
diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c
index ce153a6..419119c 100644
--- a/fs/nfs/fscache.c
+++ b/fs/nfs/fscache.c
@@ -259,12 +259,10 @@
dfprintk(FSCACHE,
"NFS: nfsi 0x%p turning cache off\n", NFS_I(inode));
- /* Need to invalidate any mapped pages that were read in before
- * turning off the cache.
+ /* Need to uncache any pages attached to this inode that
+ * fscache knows about before turning off the cache.
*/
- if (inode->i_mapping && inode->i_mapping->nrpages)
- invalidate_inode_pages2(inode->i_mapping);
-
+ fscache_uncache_all_inode_pages(NFS_I(inode)->fscache, inode);
nfs_fscache_zap_inode_cookie(inode);
}
}
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 144f2a3..6f4850d 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -256,7 +256,8 @@
nfs_attr_check_mountpoint(sb, fattr);
- if ((fattr->valid & NFS_ATTR_FATTR_FILEID) == 0 && (fattr->valid & NFS_ATTR_FATTR_MOUNTPOINT) == 0)
+ if (((fattr->valid & NFS_ATTR_FATTR_FILEID) == 0) &&
+ !nfs_attr_use_mounted_on_fileid(fattr))
goto out_no_inode;
if ((fattr->valid & NFS_ATTR_FATTR_TYPE) == 0)
goto out_no_inode;
@@ -1294,7 +1295,8 @@
if (new_isize != cur_isize) {
/* Do we perhaps have any outstanding writes, or has
* the file grown beyond our last write? */
- if (nfsi->npages == 0 || new_isize > cur_isize) {
+ if ((nfsi->npages == 0 && !test_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags)) ||
+ new_isize > cur_isize) {
i_size_write(inode, new_isize);
invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA;
}
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index b9056cb..2a55347 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -45,6 +45,17 @@
fattr->valid |= NFS_ATTR_FATTR_MOUNTPOINT;
}
+static inline int nfs_attr_use_mounted_on_fileid(struct nfs_fattr *fattr)
+{
+ if (((fattr->valid & NFS_ATTR_FATTR_MOUNTED_ON_FILEID) == 0) ||
+ (((fattr->valid & NFS_ATTR_FATTR_MOUNTPOINT) == 0) &&
+ ((fattr->valid & NFS_ATTR_FATTR_V4_REFERRAL) == 0)))
+ return 0;
+
+ fattr->fileid = fattr->mounted_on_fileid;
+ return 1;
+}
+
struct nfs_clone_mount {
const struct super_block *sb;
const struct dentry *dentry;
diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c
index 4269088..f9d03ab 100644
--- a/fs/nfs/nfs4filelayout.c
+++ b/fs/nfs/nfs4filelayout.c
@@ -30,6 +30,7 @@
*/
#include <linux/nfs_fs.h>
+#include <linux/nfs_page.h>
#include "internal.h"
#include "nfs4filelayout.h"
@@ -397,7 +398,6 @@
* this offset and save the original offset.
*/
data->args.offset = filelayout_get_dserver_offset(lseg, offset);
- data->mds_offset = offset;
/* Perform an asynchronous write */
status = nfs_initiate_write(data, ds->ds_clp->cl_rpcclient,
@@ -552,13 +552,18 @@
__func__, nfl_util, fl->num_fh, fl->first_stripe_index,
fl->pattern_offset);
- if (!fl->num_fh)
+ /* Note that a zero value for num_fh is legal for STRIPE_SPARSE.
+ * Futher checking is done in filelayout_check_layout */
+ if (fl->num_fh < 0 || fl->num_fh >
+ max(NFS4_PNFS_MAX_STRIPE_CNT, NFS4_PNFS_MAX_MULTI_CNT))
goto out_err;
- fl->fh_array = kzalloc(fl->num_fh * sizeof(struct nfs_fh *),
- gfp_flags);
- if (!fl->fh_array)
- goto out_err;
+ if (fl->num_fh > 0) {
+ fl->fh_array = kzalloc(fl->num_fh * sizeof(struct nfs_fh *),
+ gfp_flags);
+ if (!fl->fh_array)
+ goto out_err;
+ }
for (i = 0; i < fl->num_fh; i++) {
/* Do we want to use a mempool here? */
@@ -661,8 +666,9 @@
u64 p_stripe, r_stripe;
u32 stripe_unit;
- if (!pnfs_generic_pg_test(pgio, prev, req))
- return 0;
+ if (!pnfs_generic_pg_test(pgio, prev, req) ||
+ !nfs_generic_pg_test(pgio, prev, req))
+ return false;
if (!pgio->pg_lseg)
return 1;
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index d2c4b59..5879b23 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2265,12 +2265,14 @@
return nfs4_map_errors(status);
}
+static void nfs_fixup_referral_attributes(struct nfs_fattr *fattr);
/*
* Get locations and (maybe) other attributes of a referral.
* Note that we'll actually follow the referral later when
* we detect fsid mismatch in inode revalidation
*/
-static int nfs4_get_referral(struct inode *dir, const struct qstr *name, struct nfs_fattr *fattr, struct nfs_fh *fhandle)
+static int nfs4_get_referral(struct inode *dir, const struct qstr *name,
+ struct nfs_fattr *fattr, struct nfs_fh *fhandle)
{
int status = -ENOMEM;
struct page *page = NULL;
@@ -2288,15 +2290,16 @@
goto out;
/* Make sure server returned a different fsid for the referral */
if (nfs_fsid_equal(&NFS_SERVER(dir)->fsid, &locations->fattr.fsid)) {
- dprintk("%s: server did not return a different fsid for a referral at %s\n", __func__, name->name);
+ dprintk("%s: server did not return a different fsid for"
+ " a referral at %s\n", __func__, name->name);
status = -EIO;
goto out;
}
+ /* Fixup attributes for the nfs_lookup() call to nfs_fhget() */
+ nfs_fixup_referral_attributes(&locations->fattr);
+ /* replace the lookup nfs_fattr with the locations nfs_fattr */
memcpy(fattr, &locations->fattr, sizeof(struct nfs_fattr));
- fattr->valid |= NFS_ATTR_FATTR_V4_REFERRAL;
- if (!fattr->mode)
- fattr->mode = S_IFDIR;
memset(fhandle, 0, sizeof(struct nfs_fh));
out:
if (page)
@@ -4667,11 +4670,15 @@
return len;
}
+/*
+ * nfs_fhget will use either the mounted_on_fileid or the fileid
+ */
static void nfs_fixup_referral_attributes(struct nfs_fattr *fattr)
{
- if (!((fattr->valid & NFS_ATTR_FATTR_FILEID) &&
- (fattr->valid & NFS_ATTR_FATTR_FSID) &&
- (fattr->valid & NFS_ATTR_FATTR_V4_REFERRAL)))
+ if (!(((fattr->valid & NFS_ATTR_FATTR_MOUNTED_ON_FILEID) ||
+ (fattr->valid & NFS_ATTR_FATTR_FILEID)) &&
+ (fattr->valid & NFS_ATTR_FATTR_FSID) &&
+ (fattr->valid & NFS_ATTR_FATTR_V4_REFERRAL)))
return;
fattr->valid |= NFS_ATTR_FATTR_TYPE | NFS_ATTR_FATTR_MODE |
@@ -4686,7 +4693,6 @@
struct nfs_server *server = NFS_SERVER(dir);
u32 bitmask[2] = {
[0] = FATTR4_WORD0_FSID | FATTR4_WORD0_FS_LOCATIONS,
- [1] = FATTR4_WORD1_MOUNTED_ON_FILEID,
};
struct nfs4_fs_locations_arg args = {
.dir_fh = NFS_FH(dir),
@@ -4705,11 +4711,18 @@
int status;
dprintk("%s: start\n", __func__);
+
+ /* Ask for the fileid of the absent filesystem if mounted_on_fileid
+ * is not supported */
+ if (NFS_SERVER(dir)->attr_bitmask[1] & FATTR4_WORD1_MOUNTED_ON_FILEID)
+ bitmask[1] |= FATTR4_WORD1_MOUNTED_ON_FILEID;
+ else
+ bitmask[0] |= FATTR4_WORD0_FILEID;
+
nfs_fattr_init(&fs_locations->fattr);
fs_locations->server = server;
fs_locations->nlocations = 0;
status = nfs4_call_sync(server->client, server, &msg, &args.seq_args, &res.seq_res, 0);
- nfs_fixup_referral_attributes(&fs_locations->fattr);
dprintk("%s: returned status = %d\n", __func__, status);
return status;
}
@@ -5098,7 +5111,6 @@
if (mxresp_sz == 0)
mxresp_sz = NFS_MAX_FILE_IO_SIZE;
/* Fore channel attributes */
- args->fc_attrs.headerpadsz = 0;
args->fc_attrs.max_rqst_sz = mxrqst_sz;
args->fc_attrs.max_resp_sz = mxresp_sz;
args->fc_attrs.max_ops = NFS4_MAX_OPS;
@@ -5111,7 +5123,6 @@
args->fc_attrs.max_ops, args->fc_attrs.max_reqs);
/* Back channel attributes */
- args->bc_attrs.headerpadsz = 0;
args->bc_attrs.max_rqst_sz = PAGE_SIZE;
args->bc_attrs.max_resp_sz = PAGE_SIZE;
args->bc_attrs.max_resp_sz_cached = 0;
@@ -5131,8 +5142,6 @@
struct nfs4_channel_attrs *sent = &args->fc_attrs;
struct nfs4_channel_attrs *rcvd = &session->fc_attrs;
- if (rcvd->headerpadsz > sent->headerpadsz)
- return -EINVAL;
if (rcvd->max_resp_sz > sent->max_resp_sz)
return -EINVAL;
/*
@@ -5697,6 +5706,7 @@
{
struct nfs4_layoutreturn *lrp = calldata;
struct nfs_server *server;
+ struct pnfs_layout_hdr *lo = NFS_I(lrp->args.inode)->layout;
dprintk("--> %s\n", __func__);
@@ -5708,16 +5718,15 @@
nfs_restart_rpc(task, lrp->clp);
return;
}
+ spin_lock(&lo->plh_inode->i_lock);
if (task->tk_status == 0) {
- struct pnfs_layout_hdr *lo = NFS_I(lrp->args.inode)->layout;
-
if (lrp->res.lrs_present) {
- spin_lock(&lo->plh_inode->i_lock);
pnfs_set_layout_stateid(lo, &lrp->res.stateid, true);
- spin_unlock(&lo->plh_inode->i_lock);
} else
BUG_ON(!list_empty(&lo->plh_segs));
}
+ lo->plh_block_lgets--;
+ spin_unlock(&lo->plh_inode->i_lock);
dprintk("<-- %s\n", __func__);
}
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index d869a5e..e6e8f3b 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -91,7 +91,7 @@
#define encode_getfh_maxsz (op_encode_hdr_maxsz)
#define decode_getfh_maxsz (op_decode_hdr_maxsz + 1 + \
((3+NFS4_FHSIZE) >> 2))
-#define nfs4_fattr_bitmap_maxsz 3
+#define nfs4_fattr_bitmap_maxsz 4
#define encode_getattr_maxsz (op_encode_hdr_maxsz + nfs4_fattr_bitmap_maxsz)
#define nfs4_name_maxsz (1 + ((3 + NFS4_MAXNAMLEN) >> 2))
#define nfs4_path_maxsz (1 + ((3 + NFS4_MAXPATHLEN) >> 2))
@@ -255,7 +255,7 @@
#define decode_fs_locations_maxsz \
(0)
#define encode_secinfo_maxsz (op_encode_hdr_maxsz + nfs4_name_maxsz)
-#define decode_secinfo_maxsz (op_decode_hdr_maxsz + 4 + (NFS_MAX_SECFLAVORS * (16 + GSS_OID_MAX_LEN)))
+#define decode_secinfo_maxsz (op_decode_hdr_maxsz + 1 + ((NFS_MAX_SECFLAVORS * (16 + GSS_OID_MAX_LEN)) / 4))
#if defined(CONFIG_NFS_V4_1)
#define NFS4_MAX_MACHINE_NAME_LEN (64)
@@ -1725,7 +1725,7 @@
*p++ = cpu_to_be32(args->flags); /*flags */
/* Fore Channel */
- *p++ = cpu_to_be32(args->fc_attrs.headerpadsz); /* header padding size */
+ *p++ = cpu_to_be32(0); /* header padding size */
*p++ = cpu_to_be32(args->fc_attrs.max_rqst_sz); /* max req size */
*p++ = cpu_to_be32(args->fc_attrs.max_resp_sz); /* max resp size */
*p++ = cpu_to_be32(max_resp_sz_cached); /* Max resp sz cached */
@@ -1734,7 +1734,7 @@
*p++ = cpu_to_be32(0); /* rdmachannel_attrs */
/* Back Channel */
- *p++ = cpu_to_be32(args->fc_attrs.headerpadsz); /* header padding size */
+ *p++ = cpu_to_be32(0); /* header padding size */
*p++ = cpu_to_be32(args->bc_attrs.max_rqst_sz); /* max req size */
*p++ = cpu_to_be32(args->bc_attrs.max_resp_sz); /* max resp size */
*p++ = cpu_to_be32(args->bc_attrs.max_resp_sz_cached); /* Max resp sz cached */
@@ -3098,7 +3098,7 @@
return -EIO;
}
-static int decode_attr_error(struct xdr_stream *xdr, uint32_t *bitmap)
+static int decode_attr_error(struct xdr_stream *xdr, uint32_t *bitmap, int32_t *res)
{
__be32 *p;
@@ -3109,7 +3109,7 @@
if (unlikely(!p))
goto out_overflow;
bitmap[0] &= ~FATTR4_WORD0_RDATTR_ERROR;
- return -be32_to_cpup(p);
+ *res = -be32_to_cpup(p);
}
return 0;
out_overflow:
@@ -4070,6 +4070,7 @@
int status;
umode_t fmode = 0;
uint32_t type;
+ int32_t err;
status = decode_attr_type(xdr, bitmap, &type);
if (status < 0)
@@ -4095,13 +4096,12 @@
goto xdr_error;
fattr->valid |= status;
- status = decode_attr_error(xdr, bitmap);
- if (status == -NFS4ERR_WRONGSEC) {
- nfs_fixup_secinfo_attributes(fattr, fh);
- status = 0;
- }
+ err = 0;
+ status = decode_attr_error(xdr, bitmap, &err);
if (status < 0)
goto xdr_error;
+ if (err == -NFS4ERR_WRONGSEC)
+ nfs_fixup_secinfo_attributes(fattr, fh);
status = decode_attr_filehandle(xdr, bitmap, fh);
if (status < 0)
@@ -4997,12 +4997,14 @@
struct nfs4_channel_attrs *attrs)
{
__be32 *p;
- u32 nr_attrs;
+ u32 nr_attrs, val;
p = xdr_inline_decode(xdr, 28);
if (unlikely(!p))
goto out_overflow;
- attrs->headerpadsz = be32_to_cpup(p++);
+ val = be32_to_cpup(p++); /* headerpadsz */
+ if (val)
+ return -EINVAL; /* no support for header padding yet */
attrs->max_rqst_sz = be32_to_cpup(p++);
attrs->max_resp_sz = be32_to_cpup(p++);
attrs->max_resp_sz_cached = be32_to_cpup(p++);
diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c
index 9cf208d..8ff2ea3 100644
--- a/fs/nfs/objlayout/objio_osd.c
+++ b/fs/nfs/objlayout/objio_osd.c
@@ -108,7 +108,6 @@
de = n;
}
- atomic_inc(&de->id_node.ref);
return de;
}
@@ -1001,6 +1000,9 @@
if (!pnfs_generic_pg_test(pgio, prev, req))
return false;
+ if (pgio->pg_lseg == NULL)
+ return true;
+
return pgio->pg_count + req->wb_bytes <=
OBJIO_LSEG(pgio->pg_lseg)->max_io_size;
}
diff --git a/fs/nfs/objlayout/objlayout.c b/fs/nfs/objlayout/objlayout.c
index dc3956c..1d06f8e 100644
--- a/fs/nfs/objlayout/objlayout.c
+++ b/fs/nfs/objlayout/objlayout.c
@@ -291,7 +291,7 @@
struct nfs_read_data *rdata;
state->status = status;
- dprintk("%s: Begin status=%ld eof=%d\n", __func__, status, eof);
+ dprintk("%s: Begin status=%zd eof=%d\n", __func__, status, eof);
rdata = state->rpcdata;
rdata->task.tk_status = status;
if (status >= 0) {
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index 7913961..0098557 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -204,7 +204,7 @@
TASK_UNINTERRUPTIBLE);
}
-static bool nfs_generic_pg_test(struct nfs_pageio_descriptor *desc, struct nfs_page *prev, struct nfs_page *req)
+bool nfs_generic_pg_test(struct nfs_pageio_descriptor *desc, struct nfs_page *prev, struct nfs_page *req)
{
/*
* FIXME: ideally we should be able to coalesce all requests
@@ -218,6 +218,7 @@
return desc->pg_count + req->wb_bytes <= desc->pg_bsize;
}
+EXPORT_SYMBOL_GPL(nfs_generic_pg_test);
/**
* nfs_pageio_init - initialise a page io descriptor
diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index 8c1309d..29c0ca7f 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -634,14 +634,16 @@
spin_lock(&ino->i_lock);
lo = nfsi->layout;
- if (!lo || !mark_matching_lsegs_invalid(lo, &tmp_list, NULL)) {
+ if (!lo) {
spin_unlock(&ino->i_lock);
- dprintk("%s: no layout segments to return\n", __func__);
- goto out;
+ dprintk("%s: no layout to return\n", __func__);
+ return status;
}
stateid = nfsi->layout->plh_stateid;
/* Reference matched in nfs4_layoutreturn_release */
get_layout_hdr(lo);
+ mark_matching_lsegs_invalid(lo, &tmp_list, NULL);
+ lo->plh_block_lgets++;
spin_unlock(&ino->i_lock);
pnfs_free_lseg_list(&tmp_list);
@@ -650,6 +652,9 @@
lrp = kzalloc(sizeof(*lrp), GFP_KERNEL);
if (unlikely(lrp == NULL)) {
status = -ENOMEM;
+ set_bit(NFS_LAYOUT_RW_FAILED, &lo->plh_flags);
+ set_bit(NFS_LAYOUT_RO_FAILED, &lo->plh_flags);
+ put_layout_hdr(lo);
goto out;
}
@@ -887,7 +892,7 @@
ret = get_lseg(lseg);
break;
}
- if (cmp_layout(range, &lseg->pls_range) > 0)
+ if (lseg->pls_range.offset > range->offset)
break;
}
@@ -1059,23 +1064,36 @@
gfp_flags = GFP_NOFS;
}
- if (pgio->pg_count == prev->wb_bytes) {
+ if (pgio->pg_lseg == NULL) {
+ if (pgio->pg_count != prev->wb_bytes)
+ return true;
/* This is first coelesce call for a series of nfs_pages */
pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode,
prev->wb_context,
- req_offset(req),
+ req_offset(prev),
pgio->pg_count,
access_type,
gfp_flags);
- return true;
+ if (pgio->pg_lseg == NULL)
+ return true;
}
- if (pgio->pg_lseg &&
- req_offset(req) > end_offset(pgio->pg_lseg->pls_range.offset,
- pgio->pg_lseg->pls_range.length))
- return false;
-
- return true;
+ /*
+ * Test if a nfs_page is fully contained in the pnfs_layout_range.
+ * Note that this test makes several assumptions:
+ * - that the previous nfs_page in the struct nfs_pageio_descriptor
+ * is known to lie within the range.
+ * - that the nfs_page being tested is known to be contiguous with the
+ * previous nfs_page.
+ * - Layout ranges are page aligned, so we only have to test the
+ * start offset of the request.
+ *
+ * Please also note that 'end_offset' is actually the offset of the
+ * first byte that lies outside the pnfs_layout_range. FIXME?
+ *
+ */
+ return req_offset(req) < end_offset(pgio->pg_lseg->pls_range.offset,
+ pgio->pg_lseg->pls_range.length);
}
EXPORT_SYMBOL_GPL(pnfs_generic_pg_test);
diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h
index 48d0a8e..96bf4e6 100644
--- a/fs/nfs/pnfs.h
+++ b/fs/nfs/pnfs.h
@@ -186,6 +186,7 @@
/* pnfs_dev.c */
struct nfs4_deviceid_node {
struct hlist_node node;
+ struct hlist_node tmpnode;
const struct pnfs_layoutdriver_type *ld;
const struct nfs_client *nfs_client;
struct nfs4_deviceid deviceid;
diff --git a/fs/nfs/pnfs_dev.c b/fs/nfs/pnfs_dev.c
index c65e133..f0f8e1e 100644
--- a/fs/nfs/pnfs_dev.c
+++ b/fs/nfs/pnfs_dev.c
@@ -174,6 +174,7 @@
const struct nfs4_deviceid *id)
{
INIT_HLIST_NODE(&d->node);
+ INIT_HLIST_NODE(&d->tmpnode);
d->ld = ld;
d->nfs_client = nfs_client;
d->deviceid = *id;
@@ -208,6 +209,7 @@
hlist_add_head_rcu(&new->node, &nfs4_deviceid_cache[hash]);
spin_unlock(&nfs4_deviceid_lock);
+ atomic_inc(&new->ref);
return new;
}
@@ -238,24 +240,29 @@
_deviceid_purge_client(const struct nfs_client *clp, long hash)
{
struct nfs4_deviceid_node *d;
- struct hlist_node *n, *next;
+ struct hlist_node *n;
HLIST_HEAD(tmp);
+ spin_lock(&nfs4_deviceid_lock);
rcu_read_lock();
hlist_for_each_entry_rcu(d, n, &nfs4_deviceid_cache[hash], node)
if (d->nfs_client == clp && atomic_read(&d->ref)) {
hlist_del_init_rcu(&d->node);
- hlist_add_head(&d->node, &tmp);
+ hlist_add_head(&d->tmpnode, &tmp);
}
rcu_read_unlock();
+ spin_unlock(&nfs4_deviceid_lock);
if (hlist_empty(&tmp))
return;
synchronize_rcu();
- hlist_for_each_entry_safe(d, n, next, &tmp, node)
+ while (!hlist_empty(&tmp)) {
+ d = hlist_entry(tmp.first, struct nfs4_deviceid_node, tmpnode);
+ hlist_del(&d->tmpnode);
if (atomic_dec_and_test(&d->ref))
d->ld->free_deviceid_node(d);
+ }
}
void
@@ -263,8 +270,8 @@
{
long h;
- spin_lock(&nfs4_deviceid_lock);
+ if (!(clp->cl_exchange_flags & EXCHGID4_FLAG_USE_PNFS_MDS))
+ return;
for (h = 0; h < NFS4_DEVICE_ID_HASH_SIZE; h++)
_deviceid_purge_client(clp, h);
- spin_unlock(&nfs4_deviceid_lock);
}
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index e268e3b..7271680 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -864,6 +864,8 @@
data->args.fh = NFS_FH(inode);
data->args.offset = req_offset(req) + offset;
+ /* pnfs_set_layoutcommit needs this */
+ data->mds_offset = data->args.offset;
data->args.pgbase = req->wb_pgbase + offset;
data->args.pages = data->pagevec;
data->args.count = count;
diff --git a/fs/nfsd/Kconfig b/fs/nfsd/Kconfig
index 18b3e89..fbb2a5e 100644
--- a/fs/nfsd/Kconfig
+++ b/fs/nfsd/Kconfig
@@ -82,6 +82,7 @@
select NFSD_V3
select FS_POSIX_ACL
select SUNRPC_GSS
+ select CRYPTO
help
This option enables support in your system's NFS server for
version 4 of the NFS protocol (RFC 3530).
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 1f5eae4..2b1449d 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -13,6 +13,7 @@
#include <linux/lockd/lockd.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/gss_api.h>
+#include <linux/sunrpc/gss_krb5_enctypes.h>
#include "idmap.h"
#include "nfsd.h"
@@ -189,18 +190,10 @@
.release = single_release,
};
-#ifdef CONFIG_SUNRPC_GSS
+#if defined(CONFIG_SUNRPC_GSS) || defined(CONFIG_SUNRPC_GSS_MODULE)
static int supported_enctypes_show(struct seq_file *m, void *v)
{
- struct gss_api_mech *k5mech;
-
- k5mech = gss_mech_get_by_name("krb5");
- if (k5mech == NULL)
- goto out;
- if (k5mech->gm_upcall_enctypes != NULL)
- seq_printf(m, k5mech->gm_upcall_enctypes);
- gss_mech_put(k5mech);
-out:
+ seq_printf(m, KRB5_SUPPORTED_ENCTYPES);
return 0;
}
@@ -215,7 +208,7 @@
.llseek = seq_lseek,
.release = single_release,
};
-#endif /* CONFIG_SUNRPC_GSS */
+#endif /* CONFIG_SUNRPC_GSS or CONFIG_SUNRPC_GSS_MODULE */
extern int nfsd_pool_stats_open(struct inode *inode, struct file *file);
extern int nfsd_pool_stats_release(struct inode *inode, struct file *file);
@@ -1427,9 +1420,9 @@
[NFSD_Versions] = {"versions", &transaction_ops, S_IWUSR|S_IRUSR},
[NFSD_Ports] = {"portlist", &transaction_ops, S_IWUSR|S_IRUGO},
[NFSD_MaxBlkSize] = {"max_block_size", &transaction_ops, S_IWUSR|S_IRUGO},
-#ifdef CONFIG_SUNRPC_GSS
+#if defined(CONFIG_SUNRPC_GSS) || defined(CONFIG_SUNRPC_GSS_MODULE)
[NFSD_SupportedEnctypes] = {"supported_krb5_enctypes", &supported_enctypes_ops, S_IRUGO},
-#endif /* CONFIG_SUNRPC_GSS */
+#endif /* CONFIG_SUNRPC_GSS or CONFIG_SUNRPC_GSS_MODULE */
#ifdef CONFIG_NFSD_V4
[NFSD_Leasetime] = {"nfsv4leasetime", &transaction_ops, S_IWUSR|S_IRUSR},
[NFSD_Gracetime] = {"nfsv4gracetime", &transaction_ops, S_IWUSR|S_IRUSR},
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index d571827..fd0acca 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -696,7 +696,15 @@
}
#endif /* CONFIG_NFSD_V3 */
+static int nfsd_open_break_lease(struct inode *inode, int access)
+{
+ unsigned int mode;
+ if (access & NFSD_MAY_NOT_BREAK_LEASE)
+ return 0;
+ mode = (access & NFSD_MAY_WRITE) ? O_WRONLY : O_RDONLY;
+ return break_lease(inode, mode | O_NONBLOCK);
+}
/*
* Open an existing file or directory.
@@ -744,12 +752,7 @@
if (!inode->i_fop)
goto out;
- /*
- * Check to see if there are any leases on this file.
- * This may block while leases are broken.
- */
- if (!(access & NFSD_MAY_NOT_BREAK_LEASE))
- host_err = break_lease(inode, O_NONBLOCK | ((access & NFSD_MAY_WRITE) ? O_WRONLY : 0));
+ host_err = nfsd_open_break_lease(inode, access);
if (host_err) /* NOMEM or WOULDBLOCK */
goto out_nfserr;
@@ -1660,8 +1663,10 @@
if (!dold->d_inode)
goto out_drop_write;
host_err = nfsd_break_lease(dold->d_inode);
- if (host_err)
+ if (host_err) {
+ err = nfserrno(host_err);
goto out_drop_write;
+ }
host_err = vfs_link(dold, dirp, dnew);
if (!host_err) {
err = nfserrno(commit_metadata(ffhp));
diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index 7eafe46..b2e3ff3 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -1346,6 +1346,11 @@
path[level].bp_bh = NULL;
}
+static void nilfs_btree_nop(struct nilfs_bmap *btree,
+ struct nilfs_btree_path *path,
+ int level, __u64 *keyp, __u64 *ptrp)
+{
+}
static int nilfs_btree_prepare_delete(struct nilfs_bmap *btree,
struct nilfs_btree_path *path,
@@ -1356,20 +1361,19 @@
struct buffer_head *bh;
struct nilfs_btree_node *node, *parent, *sib;
__u64 sibptr;
- int pindex, level, ncmin, ncmax, ncblk, ret;
+ int pindex, dindex, level, ncmin, ncmax, ncblk, ret;
ret = 0;
stats->bs_nblocks = 0;
ncmin = NILFS_BTREE_NODE_NCHILDREN_MIN(nilfs_btree_node_size(btree));
ncblk = nilfs_btree_nchildren_per_block(btree);
- for (level = NILFS_BTREE_LEVEL_NODE_MIN;
+ for (level = NILFS_BTREE_LEVEL_NODE_MIN, dindex = path[level].bp_index;
level < nilfs_btree_height(btree) - 1;
level++) {
node = nilfs_btree_get_nonroot_node(path, level);
path[level].bp_oldreq.bpr_ptr =
- nilfs_btree_node_get_ptr(node, path[level].bp_index,
- ncblk);
+ nilfs_btree_node_get_ptr(node, dindex, ncblk);
ret = nilfs_bmap_prepare_end_ptr(btree,
&path[level].bp_oldreq, dat);
if (ret < 0)
@@ -1383,6 +1387,7 @@
parent = nilfs_btree_get_node(btree, path, level + 1, &ncmax);
pindex = path[level + 1].bp_index;
+ dindex = pindex;
if (pindex > 0) {
/* left sibling */
@@ -1421,6 +1426,14 @@
path[level].bp_sib_bh = bh;
path[level].bp_op = nilfs_btree_concat_right;
stats->bs_nblocks++;
+ /*
+ * When merging right sibling node
+ * into the current node, pointer to
+ * the right sibling node must be
+ * terminated instead. The adjustment
+ * below is required for that.
+ */
+ dindex = pindex + 1;
/* continue; */
}
} else {
@@ -1431,29 +1444,31 @@
NILFS_BTREE_ROOT_NCHILDREN_MAX) {
path[level].bp_op = nilfs_btree_shrink;
stats->bs_nblocks += 2;
+ level++;
+ path[level].bp_op = nilfs_btree_nop;
+ goto shrink_root_child;
} else {
path[level].bp_op = nilfs_btree_do_delete;
stats->bs_nblocks++;
+ goto out;
}
-
- goto out;
-
}
}
+ /* child of the root node is deleted */
+ path[level].bp_op = nilfs_btree_do_delete;
+ stats->bs_nblocks++;
+
+shrink_root_child:
node = nilfs_btree_get_root(btree);
path[level].bp_oldreq.bpr_ptr =
- nilfs_btree_node_get_ptr(node, path[level].bp_index,
+ nilfs_btree_node_get_ptr(node, dindex,
NILFS_BTREE_ROOT_NCHILDREN_MAX);
ret = nilfs_bmap_prepare_end_ptr(btree, &path[level].bp_oldreq, dat);
if (ret < 0)
goto err_out_child_node;
- /* child of the root node is deleted */
- path[level].bp_op = nilfs_btree_do_delete;
- stats->bs_nblocks++;
-
/* success */
out:
*levelp = level;
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index b954878..b9b45fc 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -801,12 +801,7 @@
int nilfs_permission(struct inode *inode, int mask, unsigned int flags)
{
- struct nilfs_root *root;
-
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
-
- root = NILFS_I(inode)->i_root;
+ struct nilfs_root *root = NILFS_I(inode)->i_root;
if ((mask & MAY_WRITE) && root &&
root->cno != NILFS_CPTREE_CURRENT_CNO)
return -EROFS; /* snapshot is not writable */
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index 141646e..bb24ab6 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2573,7 +2573,7 @@
sci->sc_watermark = NILFS_SC_DEFAULT_WATERMARK;
if (nilfs->ns_interval)
- sci->sc_interval = nilfs->ns_interval;
+ sci->sc_interval = HZ * nilfs->ns_interval;
if (nilfs->ns_watermark)
sci->sc_watermark = nilfs->ns_watermark;
return sci;
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index cdbaf5e..56f6102 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -1072,7 +1072,7 @@
sb->s_magic = OCFS2_SUPER_MAGIC;
- sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
+ sb->s_flags = (sb->s_flags & ~(MS_POSIXACL | MS_NOSEC)) |
((osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
/* Hard readonly mode only if: bdev_read_only, MS_RDONLY,
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index d738a7e..2c6d952 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -4,7 +4,6 @@
* Released under GPL v2.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/buffer_head.h>
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 14def99..fc5bc27 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2169,11 +2169,7 @@
*/
static int proc_fd_permission(struct inode *inode, int mask, unsigned int flags)
{
- int rv;
-
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
- rv = generic_permission(inode, mask, flags, NULL);
+ int rv = generic_permission(inode, mask, flags, NULL);
if (rv == 0)
return 0;
if (task_pid(current) == proc_pid(inode))
@@ -2712,6 +2708,9 @@
struct task_io_accounting acct = task->ioac;
unsigned long flags;
+ if (!ptrace_may_access(task, PTRACE_MODE_READ))
+ return -EACCES;
+
if (whole && lock_task_sighand(task, &flags)) {
struct task_struct *t = task;
@@ -2843,7 +2842,7 @@
REG("coredump_filter", S_IRUGO|S_IWUSR, proc_coredump_filter_operations),
#endif
#ifdef CONFIG_TASK_IO_ACCOUNTING
- INF("io", S_IRUGO, proc_tgid_io_accounting),
+ INF("io", S_IRUSR, proc_tgid_io_accounting),
#endif
#ifdef CONFIG_HARDWALL
INF("hardwall", S_IRUGO, proc_pid_hardwall),
@@ -3185,7 +3184,7 @@
REG("make-it-fail", S_IRUGO|S_IWUSR, proc_fault_inject_operations),
#endif
#ifdef CONFIG_TASK_IO_ACCOUNTING
- INF("io", S_IRUGO, proc_tid_io_accounting),
+ INF("io", S_IRUSR, proc_tid_io_accounting),
#endif
#ifdef CONFIG_HARDWALL
INF("hardwall", S_IRUGO, proc_pid_hardwall),
diff --git a/fs/proc/namespaces.c b/fs/proc/namespaces.c
index 781dec5..be177f7 100644
--- a/fs/proc/namespaces.c
+++ b/fs/proc/namespaces.c
@@ -38,18 +38,21 @@
struct inode *inode;
struct proc_inode *ei;
struct dentry *error = ERR_PTR(-ENOENT);
+ void *ns;
inode = proc_pid_make_inode(dir->i_sb, task);
if (!inode)
goto out;
+ ns = ns_ops->get(task);
+ if (!ns)
+ goto out_iput;
+
ei = PROC_I(inode);
inode->i_mode = S_IFREG|S_IRUSR;
inode->i_fop = &ns_file_operations;
ei->ns_ops = ns_ops;
- ei->ns = ns_ops->get(task);
- if (!ei->ns)
- goto out_iput;
+ ei->ns = ns;
dentry->d_op = &pid_dentry_operations;
d_add(dentry, inode);
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index f50133c..d167de3 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -304,9 +304,6 @@
struct ctl_table *table;
int error;
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
-
/* Executable files are not allowed under /proc/sys/ */
if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode))
return -EACCES;
diff --git a/fs/proc/root.c b/fs/proc/root.c
index a9000e9..d6c3b41 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -28,11 +28,12 @@
static int proc_set_super(struct super_block *sb, void *data)
{
- struct pid_namespace *ns;
-
- ns = (struct pid_namespace *)data;
- sb->s_fs_info = get_pid_ns(ns);
- return set_anon_super(sb, NULL);
+ int err = set_anon_super(sb, NULL);
+ if (!err) {
+ struct pid_namespace *ns = (struct pid_namespace *)data;
+ sb->s_fs_info = get_pid_ns(ns);
+ }
+ return err;
}
static struct dentry *proc_mount(struct file_system_type *fs_type,
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index e8a62f4..d780896 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -954,8 +954,6 @@
int reiserfs_permission(struct inode *inode, int mask, unsigned int flags)
{
- if (flags & IPERM_FLAG_RCU)
- return -ECHILD;
/*
* We don't do permission checks on the internal objects.
* Permissions are determined by the "owning" object.
diff --git a/fs/romfs/mmap-nommu.c b/fs/romfs/mmap-nommu.c
index f0511e8..eed9942 100644
--- a/fs/romfs/mmap-nommu.c
+++ b/fs/romfs/mmap-nommu.c
@@ -27,14 +27,18 @@
{
struct inode *inode = file->f_mapping->host;
struct mtd_info *mtd = inode->i_sb->s_mtd;
- unsigned long isize, offset;
+ unsigned long isize, offset, maxpages, lpages;
if (!mtd)
goto cant_map_directly;
+ /* the mapping mustn't extend beyond the EOF */
+ lpages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
isize = i_size_read(inode);
offset = pgoff << PAGE_SHIFT;
- if (offset > isize || len > isize || offset > isize - len)
+
+ maxpages = (isize + PAGE_SIZE - 1) >> PAGE_SHIFT;
+ if ((pgoff >= maxpages) || (maxpages - pgoff < lpages))
return (unsigned long) -EINVAL;
/* we need to call down to the MTD layer to do the actual mapping */
diff --git a/fs/super.c b/fs/super.c
index c755939..ab3d672 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -822,7 +822,7 @@
} else {
char b[BDEVNAME_SIZE];
- s->s_flags = flags;
+ s->s_flags = flags | MS_NOSEC;
s->s_mode = mode;
strlcpy(s->s_id, bdevname(bdev, b), sizeof(s->s_id));
sb_set_blocksize(s, block_size(bdev));
diff --git a/fs/sysfs/mount.c b/fs/sysfs/mount.c
index 2668957..e34f0d9 100644
--- a/fs/sysfs/mount.c
+++ b/fs/sysfs/mount.c
@@ -95,6 +95,14 @@
return error;
}
+static void free_sysfs_super_info(struct sysfs_super_info *info)
+{
+ int type;
+ for (type = KOBJ_NS_TYPE_NONE; type < KOBJ_NS_TYPES; type++)
+ kobj_ns_drop(type, info->ns[type]);
+ kfree(info);
+}
+
static struct dentry *sysfs_mount(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data)
{
@@ -108,11 +116,11 @@
return ERR_PTR(-ENOMEM);
for (type = KOBJ_NS_TYPE_NONE; type < KOBJ_NS_TYPES; type++)
- info->ns[type] = kobj_ns_current(type);
+ info->ns[type] = kobj_ns_grab_current(type);
sb = sget(fs_type, sysfs_test_super, sysfs_set_super, info);
if (IS_ERR(sb) || sb->s_fs_info != info)
- kfree(info);
+ free_sysfs_super_info(info);
if (IS_ERR(sb))
return ERR_CAST(sb);
if (!sb->s_root) {
@@ -131,12 +139,11 @@
static void sysfs_kill_sb(struct super_block *sb)
{
struct sysfs_super_info *info = sysfs_info(sb);
-
/* Remove the superblock from fs_supers/s_instances
* so we can't find it, before freeing sysfs_super_info.
*/
kill_anon_super(sb);
- kfree(info);
+ free_sysfs_super_info(info);
}
static struct file_system_type sysfs_fs_type = {
@@ -145,28 +152,6 @@
.kill_sb = sysfs_kill_sb,
};
-void sysfs_exit_ns(enum kobj_ns_type type, const void *ns)
-{
- struct super_block *sb;
-
- mutex_lock(&sysfs_mutex);
- spin_lock(&sb_lock);
- list_for_each_entry(sb, &sysfs_fs_type.fs_supers, s_instances) {
- struct sysfs_super_info *info = sysfs_info(sb);
- /*
- * If we see a superblock on the fs_supers/s_instances
- * list the unmount has not completed and sb->s_fs_info
- * points to a valid struct sysfs_super_info.
- */
- /* Ignore superblocks with the wrong ns */
- if (info->ns[type] != ns)
- continue;
- info->ns[type] = NULL;
- }
- spin_unlock(&sb_lock);
- mutex_unlock(&sysfs_mutex);
-}
-
int __init sysfs_init(void)
{
int err = -ENOMEM;
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index 3d28af31..2ed2404 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -136,7 +136,7 @@
* instance).
*/
struct sysfs_super_info {
- const void *ns[KOBJ_NS_TYPES];
+ void *ns[KOBJ_NS_TYPES];
};
#define sysfs_info(SB) ((struct sysfs_super_info *)(SB->s_fs_info))
extern struct sysfs_dirent sysfs_root;
diff --git a/fs/timerfd.c b/fs/timerfd.c
index f67acbd..dffeb37 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -61,7 +61,9 @@
/*
* Called when the clock was set to cancel the timers in the cancel
- * list.
+ * list. This will wake up processes waiting on these timers. The
+ * wake-up requires ctx->ticks to be non zero, therefore we increment
+ * it before calling wake_up_locked().
*/
void timerfd_clock_was_set(void)
{
@@ -76,6 +78,7 @@
spin_lock_irqsave(&ctx->wqh.lock, flags);
if (ctx->moffs.tv64 != moffs.tv64) {
ctx->moffs.tv64 = KTIME_MAX;
+ ctx->ticks++;
wake_up_locked(&ctx->wqh);
}
spin_unlock_irqrestore(&ctx->wqh.lock, flags);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index b5aeb5a..529be05 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1848,7 +1848,6 @@
bdi_destroy(&c->bdi);
ubi_close_volume(c->ubi);
mutex_unlock(&c->umount_mutex);
- kfree(c);
}
static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
@@ -1971,61 +1970,65 @@
return ERR_PTR(-EINVAL);
}
+static struct ubifs_info *alloc_ubifs_info(struct ubi_volume_desc *ubi)
+{
+ struct ubifs_info *c;
+
+ c = kzalloc(sizeof(struct ubifs_info), GFP_KERNEL);
+ if (c) {
+ spin_lock_init(&c->cnt_lock);
+ spin_lock_init(&c->cs_lock);
+ spin_lock_init(&c->buds_lock);
+ spin_lock_init(&c->space_lock);
+ spin_lock_init(&c->orphan_lock);
+ init_rwsem(&c->commit_sem);
+ mutex_init(&c->lp_mutex);
+ mutex_init(&c->tnc_mutex);
+ mutex_init(&c->log_mutex);
+ mutex_init(&c->mst_mutex);
+ mutex_init(&c->umount_mutex);
+ mutex_init(&c->bu_mutex);
+ mutex_init(&c->write_reserve_mutex);
+ init_waitqueue_head(&c->cmt_wq);
+ c->buds = RB_ROOT;
+ c->old_idx = RB_ROOT;
+ c->size_tree = RB_ROOT;
+ c->orph_tree = RB_ROOT;
+ INIT_LIST_HEAD(&c->infos_list);
+ INIT_LIST_HEAD(&c->idx_gc);
+ INIT_LIST_HEAD(&c->replay_list);
+ INIT_LIST_HEAD(&c->replay_buds);
+ INIT_LIST_HEAD(&c->uncat_list);
+ INIT_LIST_HEAD(&c->empty_list);
+ INIT_LIST_HEAD(&c->freeable_list);
+ INIT_LIST_HEAD(&c->frdi_idx_list);
+ INIT_LIST_HEAD(&c->unclean_leb_list);
+ INIT_LIST_HEAD(&c->old_buds);
+ INIT_LIST_HEAD(&c->orph_list);
+ INIT_LIST_HEAD(&c->orph_new);
+ c->no_chk_data_crc = 1;
+
+ c->highest_inum = UBIFS_FIRST_INO;
+ c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM;
+
+ ubi_get_volume_info(ubi, &c->vi);
+ ubi_get_device_info(c->vi.ubi_num, &c->di);
+ }
+ return c;
+}
+
static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
{
- struct ubi_volume_desc *ubi = sb->s_fs_info;
- struct ubifs_info *c;
+ struct ubifs_info *c = sb->s_fs_info;
struct inode *root;
int err;
- c = kzalloc(sizeof(struct ubifs_info), GFP_KERNEL);
- if (!c)
- return -ENOMEM;
-
- spin_lock_init(&c->cnt_lock);
- spin_lock_init(&c->cs_lock);
- spin_lock_init(&c->buds_lock);
- spin_lock_init(&c->space_lock);
- spin_lock_init(&c->orphan_lock);
- init_rwsem(&c->commit_sem);
- mutex_init(&c->lp_mutex);
- mutex_init(&c->tnc_mutex);
- mutex_init(&c->log_mutex);
- mutex_init(&c->mst_mutex);
- mutex_init(&c->umount_mutex);
- mutex_init(&c->bu_mutex);
- mutex_init(&c->write_reserve_mutex);
- init_waitqueue_head(&c->cmt_wq);
- c->buds = RB_ROOT;
- c->old_idx = RB_ROOT;
- c->size_tree = RB_ROOT;
- c->orph_tree = RB_ROOT;
- INIT_LIST_HEAD(&c->infos_list);
- INIT_LIST_HEAD(&c->idx_gc);
- INIT_LIST_HEAD(&c->replay_list);
- INIT_LIST_HEAD(&c->replay_buds);
- INIT_LIST_HEAD(&c->uncat_list);
- INIT_LIST_HEAD(&c->empty_list);
- INIT_LIST_HEAD(&c->freeable_list);
- INIT_LIST_HEAD(&c->frdi_idx_list);
- INIT_LIST_HEAD(&c->unclean_leb_list);
- INIT_LIST_HEAD(&c->old_buds);
- INIT_LIST_HEAD(&c->orph_list);
- INIT_LIST_HEAD(&c->orph_new);
- c->no_chk_data_crc = 1;
-
c->vfs_sb = sb;
- c->highest_inum = UBIFS_FIRST_INO;
- c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM;
-
- ubi_get_volume_info(ubi, &c->vi);
- ubi_get_device_info(c->vi.ubi_num, &c->di);
-
/* Re-open the UBI device in read-write mode */
c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READWRITE);
if (IS_ERR(c->ubi)) {
err = PTR_ERR(c->ubi);
- goto out_free;
+ goto out;
}
/*
@@ -2091,24 +2094,29 @@
bdi_destroy(&c->bdi);
out_close:
ubi_close_volume(c->ubi);
-out_free:
- kfree(c);
+out:
return err;
}
static int sb_test(struct super_block *sb, void *data)
{
- dev_t *dev = data;
+ struct ubifs_info *c1 = data;
struct ubifs_info *c = sb->s_fs_info;
- return c->vi.cdev == *dev;
+ return c->vi.cdev == c1->vi.cdev;
+}
+
+static int sb_set(struct super_block *sb, void *data)
+{
+ sb->s_fs_info = data;
+ return set_anon_super(sb, NULL);
}
static struct dentry *ubifs_mount(struct file_system_type *fs_type, int flags,
const char *name, void *data)
{
struct ubi_volume_desc *ubi;
- struct ubi_volume_info vi;
+ struct ubifs_info *c;
struct super_block *sb;
int err;
@@ -2125,19 +2133,25 @@
name, (int)PTR_ERR(ubi));
return ERR_CAST(ubi);
}
- ubi_get_volume_info(ubi, &vi);
- dbg_gen("opened ubi%d_%d", vi.ubi_num, vi.vol_id);
+ c = alloc_ubifs_info(ubi);
+ if (!c) {
+ err = -ENOMEM;
+ goto out_close;
+ }
- sb = sget(fs_type, &sb_test, &set_anon_super, &vi.cdev);
+ dbg_gen("opened ubi%d_%d", c->vi.ubi_num, c->vi.vol_id);
+
+ sb = sget(fs_type, sb_test, sb_set, c);
if (IS_ERR(sb)) {
err = PTR_ERR(sb);
+ kfree(c);
goto out_close;
}
if (sb->s_root) {
struct ubifs_info *c1 = sb->s_fs_info;
-
+ kfree(c);
/* A new mount point for already mounted UBIFS */
dbg_gen("this ubi volume is already mounted");
if (!!(flags & MS_RDONLY) != c1->ro_mount) {
@@ -2146,11 +2160,6 @@
}
} else {
sb->s_flags = flags;
- /*
- * Pass 'ubi' to 'fill_super()' in sb->s_fs_info where it is
- * replaced by 'c'.
- */
- sb->s_fs_info = ubi;
err = ubifs_fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
if (err)
goto out_deact;
@@ -2170,11 +2179,18 @@
return ERR_PTR(err);
}
+static void kill_ubifs_super(struct super_block *s)
+{
+ struct ubifs_info *c = s->s_fs_info;
+ kill_anon_super(s);
+ kfree(c);
+}
+
static struct file_system_type ubifs_fs_type = {
.name = "ubifs",
.owner = THIS_MODULE,
.mount = ubifs_mount,
- .kill_sb = kill_anon_super,
+ .kill_sb = kill_ubifs_super,
};
/*
diff --git a/fs/ufs/namei.c b/fs/ufs/namei.c
index 29309e2..b57aab9 100644
--- a/fs/ufs/namei.c
+++ b/fs/ufs/namei.c
@@ -56,16 +56,12 @@
lock_ufs(dir->i_sb);
ino = ufs_inode_by_name(dir, &dentry->d_name);
- if (ino) {
+ if (ino)
inode = ufs_iget(dir->i_sb, ino);
- if (IS_ERR(inode)) {
- unlock_ufs(dir->i_sb);
- return ERR_CAST(inode);
- }
- }
unlock_ufs(dir->i_sb);
- d_add(dentry, inode);
- return NULL;
+ if (IS_ERR(inode))
+ return ERR_CAST(inode);
+ return d_splice_alias(inode, dentry);
}
/*
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index f4213ba..7f782af 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -131,19 +131,34 @@
{
struct inode *inode = file->f_mapping->host;
struct xfs_inode *ip = XFS_I(inode);
+ struct xfs_mount *mp = ip->i_mount;
struct xfs_trans *tp;
int error = 0;
int log_flushed = 0;
trace_xfs_file_fsync(ip);
- if (XFS_FORCED_SHUTDOWN(ip->i_mount))
+ if (XFS_FORCED_SHUTDOWN(mp))
return -XFS_ERROR(EIO);
xfs_iflags_clear(ip, XFS_ITRUNCATED);
xfs_ioend_wait(ip);
+ if (mp->m_flags & XFS_MOUNT_BARRIER) {
+ /*
+ * If we have an RT and/or log subvolume we need to make sure
+ * to flush the write cache the device used for file data
+ * first. This is to ensure newly written file data make
+ * it to disk before logging the new inode size in case of
+ * an extending write.
+ */
+ if (XFS_IS_REALTIME_INODE(ip))
+ xfs_blkdev_issue_flush(mp->m_rtdev_targp);
+ else if (mp->m_logdev_targp != mp->m_ddev_targp)
+ xfs_blkdev_issue_flush(mp->m_ddev_targp);
+ }
+
/*
* We always need to make sure that the required inode state is safe on
* disk. The inode might be clean but we still might need to force the
@@ -175,9 +190,9 @@
* updates. The sync transaction will also force the log.
*/
xfs_iunlock(ip, XFS_ILOCK_SHARED);
- tp = xfs_trans_alloc(ip->i_mount, XFS_TRANS_FSYNC_TS);
+ tp = xfs_trans_alloc(mp, XFS_TRANS_FSYNC_TS);
error = xfs_trans_reserve(tp, 0,
- XFS_FSYNC_TS_LOG_RES(ip->i_mount), 0, 0, 0);
+ XFS_FSYNC_TS_LOG_RES(mp), 0, 0, 0);
if (error) {
xfs_trans_cancel(tp, 0);
return -error;
@@ -209,28 +224,25 @@
* force the log.
*/
if (xfs_ipincount(ip)) {
- error = _xfs_log_force_lsn(ip->i_mount,
+ error = _xfs_log_force_lsn(mp,
ip->i_itemp->ili_last_lsn,
XFS_LOG_SYNC, &log_flushed);
}
xfs_iunlock(ip, XFS_ILOCK_SHARED);
}
- if (ip->i_mount->m_flags & XFS_MOUNT_BARRIER) {
- /*
- * If the log write didn't issue an ordered tag we need
- * to flush the disk cache for the data device now.
- */
- if (!log_flushed)
- xfs_blkdev_issue_flush(ip->i_mount->m_ddev_targp);
-
- /*
- * If this inode is on the RT dev we need to flush that
- * cache as well.
- */
- if (XFS_IS_REALTIME_INODE(ip))
- xfs_blkdev_issue_flush(ip->i_mount->m_rtdev_targp);
- }
+ /*
+ * If we only have a single device, and the log force about was
+ * a no-op we might have to flush the data device cache here.
+ * This can only happen for fdatasync/O_DSYNC if we were overwriting
+ * an already allocated file and thus do not have any metadata to
+ * commit.
+ */
+ if ((mp->m_flags & XFS_MOUNT_BARRIER) &&
+ mp->m_logdev_targp == mp->m_ddev_targp &&
+ !XFS_IS_REALTIME_INODE(ip) &&
+ !log_flushed)
+ xfs_blkdev_issue_flush(mp->m_ddev_targp);
return -error;
}
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index dd21784..d44d92c 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -182,7 +182,7 @@
if (IS_POSIXACL(dir)) {
default_acl = xfs_get_acl(dir, ACL_TYPE_DEFAULT);
if (IS_ERR(default_acl))
- return -PTR_ERR(default_acl);
+ return PTR_ERR(default_acl);
if (!default_acl)
mode &= ~current_umask();
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 1e3a7ce..a1a881e 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -627,68 +627,6 @@
blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
}
-/*
- * Try to write out the superblock using barriers.
- */
-STATIC int
-xfs_barrier_test(
- xfs_mount_t *mp)
-{
- xfs_buf_t *sbp = xfs_getsb(mp, 0);
- int error;
-
- XFS_BUF_UNDONE(sbp);
- XFS_BUF_UNREAD(sbp);
- XFS_BUF_UNDELAYWRITE(sbp);
- XFS_BUF_WRITE(sbp);
- XFS_BUF_UNASYNC(sbp);
- XFS_BUF_ORDERED(sbp);
-
- xfsbdstrat(mp, sbp);
- error = xfs_buf_iowait(sbp);
-
- /*
- * Clear all the flags we set and possible error state in the
- * buffer. We only did the write to try out whether barriers
- * worked and shouldn't leave any traces in the superblock
- * buffer.
- */
- XFS_BUF_DONE(sbp);
- XFS_BUF_ERROR(sbp, 0);
- XFS_BUF_UNORDERED(sbp);
-
- xfs_buf_relse(sbp);
- return error;
-}
-
-STATIC void
-xfs_mountfs_check_barriers(xfs_mount_t *mp)
-{
- int error;
-
- if (mp->m_logdev_targp != mp->m_ddev_targp) {
- xfs_notice(mp,
- "Disabling barriers, not supported with external log device");
- mp->m_flags &= ~XFS_MOUNT_BARRIER;
- return;
- }
-
- if (xfs_readonly_buftarg(mp->m_ddev_targp)) {
- xfs_notice(mp,
- "Disabling barriers, underlying device is readonly");
- mp->m_flags &= ~XFS_MOUNT_BARRIER;
- return;
- }
-
- error = xfs_barrier_test(mp);
- if (error) {
- xfs_notice(mp,
- "Disabling barriers, trial barrier write failed");
- mp->m_flags &= ~XFS_MOUNT_BARRIER;
- return;
- }
-}
-
void
xfs_blkdev_issue_flush(
xfs_buftarg_t *buftarg)
@@ -1240,14 +1178,6 @@
switch (token) {
case Opt_barrier:
mp->m_flags |= XFS_MOUNT_BARRIER;
-
- /*
- * Test if barriers are actually working if we can,
- * else delay this check until the filesystem is
- * marked writeable.
- */
- if (!(mp->m_flags & XFS_MOUNT_RDONLY))
- xfs_mountfs_check_barriers(mp);
break;
case Opt_nobarrier:
mp->m_flags &= ~XFS_MOUNT_BARRIER;
@@ -1282,8 +1212,6 @@
/* ro -> rw */
if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) {
mp->m_flags &= ~XFS_MOUNT_RDONLY;
- if (mp->m_flags & XFS_MOUNT_BARRIER)
- xfs_mountfs_check_barriers(mp);
/*
* If this is the first remount to writeable state we
@@ -1465,9 +1393,6 @@
if (error)
goto out_free_sb;
- if (mp->m_flags & XFS_MOUNT_BARRIER)
- xfs_mountfs_check_barriers(mp);
-
error = xfs_filestream_mount(mp);
if (error)
goto out_free_sb;
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index c863753..01d2072 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -490,6 +490,13 @@
args.whichfork = XFS_ATTR_FORK;
/*
+ * we have no control over the attribute names that userspace passes us
+ * to remove, so we have to allow the name lookup prior to attribute
+ * removal to fail.
+ */
+ args.op_flags = XFS_DA_OP_OKNOENT;
+
+ /*
* Attach the dquots to the inode.
*/
error = xfs_qm_dqattach(dp, 0);
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index cb9b6d1..3631783 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -253,16 +253,21 @@
rcu_read_lock();
spin_lock(&ip->i_flags_lock);
- ip->i_flags &= ~XFS_INEW;
- ip->i_flags |= XFS_IRECLAIMABLE;
- __xfs_inode_set_reclaim_tag(pag, ip);
+ ip->i_flags &= ~(XFS_INEW | XFS_IRECLAIM);
+ ASSERT(ip->i_flags & XFS_IRECLAIMABLE);
trace_xfs_iget_reclaim_fail(ip);
goto out_error;
}
spin_lock(&pag->pag_ici_lock);
spin_lock(&ip->i_flags_lock);
- ip->i_flags &= ~(XFS_IRECLAIMABLE | XFS_IRECLAIM);
+
+ /*
+ * Clear the per-lifetime state in the inode as we are now
+ * effectively a new inode and need to return to the initial
+ * state before reuse occurs.
+ */
+ ip->i_flags &= ~XFS_IRECLAIM_RESET_FLAGS;
ip->i_flags |= XFS_INEW;
__xfs_inode_clear_reclaim_tag(mp, pag, ip);
inode->i_state = I_NEW;
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index 3ae6d58..964cfea 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -384,6 +384,16 @@
#define XFS_IDIRTY_RELEASE 0x0040 /* dirty release already seen */
/*
+ * Per-lifetime flags need to be reset when re-using a reclaimable inode during
+ * inode lookup. Thi prevents unintended behaviour on the new inode from
+ * ocurring.
+ */
+#define XFS_IRECLAIM_RESET_FLAGS \
+ (XFS_IRECLAIMABLE | XFS_IRECLAIM | \
+ XFS_IDIRTY_RELEASE | XFS_ITRUNCATED | \
+ XFS_IFILESTREAM);
+
+/*
* Flags for inode locking.
* Bit ranges: 1<<1 - 1<<16-1 -- iolock/ilock modes (bitfield)
* 1<<16 - 1<<32-1 -- lockdep annotation (integers)
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 09983a3..b1e88d5 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -681,15 +681,15 @@
* where the cluster buffer may be unpinned before the inode is inserted into
* the AIL during transaction committed processing. If the buffer is unpinned
* before the inode item has been committed and inserted, then it is possible
- * for the buffer to be written and IO completions before the inode is inserted
+ * for the buffer to be written and IO completes before the inode is inserted
* into the AIL. In that case, we'd be inserting a clean, stale inode into the
* AIL which will never get removed. It will, however, get reclaimed which
* triggers an assert in xfs_inode_free() complaining about freein an inode
* still in the AIL.
*
- * To avoid this, return a lower LSN than the one passed in so that the
- * transaction committed code will not move the inode forward in the AIL but
- * will still unpin it properly.
+ * To avoid this, just unpin the inode directly and return a LSN of -1 so the
+ * transaction committed code knows that it does not need to do any further
+ * processing on the item.
*/
STATIC xfs_lsn_t
xfs_inode_item_committed(
@@ -699,8 +699,10 @@
struct xfs_inode_log_item *iip = INODE_ITEM(lip);
struct xfs_inode *ip = iip->ili_inode;
- if (xfs_iflags_test(ip, XFS_ISTALE))
- return lsn - 1;
+ if (xfs_iflags_test(ip, XFS_ISTALE)) {
+ xfs_inode_item_unpin(lip, 0);
+ return -1;
+ }
return lsn;
}
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index 2119302..41d5b8f 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -1372,8 +1372,17 @@
XFS_BUF_ASYNC(bp);
bp->b_flags |= XBF_LOG_BUFFER;
- if (log->l_mp->m_flags & XFS_MOUNT_BARRIER)
+ if (log->l_mp->m_flags & XFS_MOUNT_BARRIER) {
+ /*
+ * If we have an external log device, flush the data device
+ * before flushing the log to make sure all meta data
+ * written back from the AIL actually made it to disk
+ * before writing out the new log tail LSN in the log buffer.
+ */
+ if (log->l_mp->m_logdev_targp != log->l_mp->m_ddev_targp)
+ xfs_blkdev_issue_flush(log->l_mp->m_ddev_targp);
XFS_BUF_ORDERED(bp);
+ }
ASSERT(XFS_BUF_ADDR(bp) <= log->l_logBBsize-1);
ASSERT(XFS_BUF_ADDR(bp) + BTOBB(count) <= log->l_logBBsize);
diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c
index 7c7bc2b..c83f63b 100644
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -1361,7 +1361,7 @@
lip->li_flags |= XFS_LI_ABORTED;
item_lsn = IOP_COMMITTED(lip, commit_lsn);
- /* If the committed routine returns -1, item has been freed. */
+ /* item_lsn of -1 means the item needs no further processing */
if (XFS_LSN_CMP(item_lsn, (xfs_lsn_t)-1) == 0)
return;
@@ -1474,7 +1474,7 @@
lip->li_flags |= XFS_LI_ABORTED;
item_lsn = IOP_COMMITTED(lip, commit_lsn);
- /* item_lsn of -1 means the item was freed */
+ /* item_lsn of -1 means the item needs no further processing */
if (XFS_LSN_CMP(item_lsn, (xfs_lsn_t)-1) == 0)
continue;
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index b7a5fe7..6197207 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -960,8 +960,11 @@
* be exposed to that problem.
*/
truncated = xfs_iflags_test_and_clear(ip, XFS_ITRUNCATED);
- if (truncated && VN_DIRTY(VFS_I(ip)) && ip->i_delayed_blks > 0)
- xfs_flush_pages(ip, 0, -1, XBF_ASYNC, FI_NONE);
+ if (truncated) {
+ xfs_iflags_clear(ip, XFS_IDIRTY_RELEASE);
+ if (VN_DIRTY(VFS_I(ip)) && ip->i_delayed_blks > 0)
+ xfs_flush_pages(ip, 0, -1, XBF_ASYNC, FI_NONE);
+ }
}
if (ip->i_d.di_nlink == 0)
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 3a10ef5..6cd5b64 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -210,7 +210,7 @@
struct acpi_device_power {
int state; /* Current state */
struct acpi_device_power_flags flags;
- struct acpi_device_power_state states[4]; /* Power states (D0-D3) */
+ struct acpi_device_power_state states[ACPI_D_STATE_COUNT]; /* Power states (D0-D3Cold) */
};
/* Performance Management */
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index a756bc8..4543b6f 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -98,8 +98,11 @@
/*
* Spinlock primitives
*/
+
+#ifndef acpi_os_create_lock
acpi_status
acpi_os_create_lock(acpi_spinlock *out_handle);
+#endif
void acpi_os_delete_lock(acpi_spinlock handle);
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 5d2a5e9..2ce1be9 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -159,6 +159,24 @@
} while (0)
#endif
+/*
+ * When lockdep is enabled, the spin_lock_init() macro stringifies it's
+ * argument and uses that as a name for the lock in debugging.
+ * By executing spin_lock_init() in a macro the key changes from "lock" for
+ * all locks to the name of the argument of acpi_os_create_lock(), which
+ * prevents lockdep from reporting false positives for ACPICA locks.
+ */
+#define acpi_os_create_lock(__handle) \
+({ \
+ spinlock_t *lock = ACPI_ALLOCATE(sizeof(*lock)); \
+ \
+ if (lock) { \
+ *(__handle) = lock; \
+ spin_lock_init(*(__handle)); \
+ } \
+ lock ? AE_OK : AE_NO_MEMORY; \
+})
+
#endif /* __KERNEL__ */
#endif /* __ACLINUX_H__ */
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index fcdcb5d..d494001 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -170,16 +170,6 @@
extern int __gpio_to_irq(unsigned gpio);
-#define GPIOF_DIR_OUT (0 << 0)
-#define GPIOF_DIR_IN (1 << 0)
-
-#define GPIOF_INIT_LOW (0 << 1)
-#define GPIOF_INIT_HIGH (1 << 1)
-
-#define GPIOF_IN (GPIOF_DIR_IN)
-#define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW)
-#define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH)
-
/**
* struct gpio - a structure describing a GPIO with configuration
* @gpio: the GPIO number
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index e9b8e59..76bff2b 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -88,7 +88,7 @@
pmd_t pmd = *pmdp;
pmd_clear(mm, address, pmdp);
return pmd;
-})
+}
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
#endif
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 9573e0c..33d12f8 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -520,6 +520,8 @@
uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
uint32_t force_encoder_id;
struct drm_encoder *encoder; /* currently active encoder */
+
+ int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
};
/**
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index f04b2a3..3d53efd 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -182,6 +182,7 @@
{0x1002, 0x6750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6758, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6759, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x675F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6760, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6761, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6762, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
@@ -192,6 +193,7 @@
{0x1002, 0x6767, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6768, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6770, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6778, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6779, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6880, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6888, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CYPRESS|RADEON_NEW_MEMMAP}, \
@@ -467,6 +469,17 @@
{0x1002, 0x9614, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9615, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9616, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS780|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9640, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9641, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9642, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9643, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9644, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9645, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO2|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
+ {0x1002, 0x9648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
+ {0x1002, 0x964a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x964e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
+ {0x1002, 0x964f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
{0x1002, 0x9710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9711, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 5479fdc..514ed45 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -201,6 +201,9 @@
bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
void *dma_rx_param;
void *dma_tx_param;
+ void (*init) (void);
+ void (*exit) (void);
+ void (*reset) (void);
};
#endif
diff --git a/include/linux/basic_mmio_gpio.h b/include/linux/basic_mmio_gpio.h
index 1ae1271..98999cf1 100644
--- a/include/linux/basic_mmio_gpio.h
+++ b/include/linux/basic_mmio_gpio.h
@@ -16,6 +16,7 @@
#include <linux/gpio.h>
#include <linux/types.h>
#include <linux/compiler.h>
+#include <linux/spinlock_types.h>
struct bgpio_pdata {
int base;
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 2a7cea53..6395692 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -167,7 +167,7 @@
(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
#define REQ_COMMON_MASK \
(REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \
- REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
+ REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE)
#define REQ_CLONE_MASK REQ_COMMON_MASK
#define REQ_RAHEAD (1 << __REQ_RAHEAD)
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index b22fb0d..8c7c2de 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -169,7 +169,8 @@
extern int do_blk_trace_setup(struct request_queue *q, char *name,
dev_t dev, struct block_device *bdev,
struct blk_user_trace_setup *buts);
-extern void __trace_note_message(struct blk_trace *, const char *fmt, ...);
+extern __attribute__((format(printf, 2, 3)))
+void __trace_note_message(struct blk_trace *, const char *fmt, ...);
/**
* blk_add_trace_msg - Add a (simple) message to the blktrace stream
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index d4646b4..18a1baf 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -188,6 +188,7 @@
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
/* Watchdog related data, used by the framework */
struct list_head wd_list;
+ cycle_t cs_last;
cycle_t wd_last;
#endif
} ____cacheline_aligned;
diff --git a/include/linux/compat.h b/include/linux/compat.h
index ddcb7db..846bb17 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -467,6 +467,8 @@
char __user *optval, unsigned int optlen);
asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg,
unsigned flags);
+asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg,
+ unsigned vlen, unsigned int flags);
asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg,
unsigned int flags);
asmlinkage long compat_sys_recv(int fd, void __user *buf, size_t len,
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 7c60d09..f696bcc 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -44,7 +44,7 @@
#define CN_VAL_DRBD 0x1
#define CN_KVP_IDX 0x9 /* HyperV KVP */
-#define CN_NETLINK_USERS 9
+#define CN_NETLINK_USERS 10 /* Highest index + 1 */
/*
* Maximum connector's message size.
diff --git a/include/linux/device.h b/include/linux/device.h
index c66111a..e4f62d8 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -530,7 +530,6 @@
* @dma_mem: Internal for coherent mem override.
* @archdata: For arch-specific additions.
* @of_node: Associated device tree node.
- * @of_match: Matching of_device_id from driver.
* @devt: For creating the sysfs "dev".
* @devres_lock: Spinlock to protect the resource of the device.
* @devres_head: The resources list of the device.
@@ -654,13 +653,13 @@
static inline void device_enable_async_suspend(struct device *dev)
{
- if (!dev->power.in_suspend)
+ if (!dev->power.is_prepared)
dev->power.async_suspend = true;
}
static inline void device_disable_async_suspend(struct device *dev)
{
- if (!dev->power.in_suspend)
+ if (!dev->power.is_prepared)
dev->power.async_suspend = false;
}
diff --git a/include/linux/device_cgroup.h b/include/linux/device_cgroup.h
index 0b0d9c3..7aad1f4 100644
--- a/include/linux/device_cgroup.h
+++ b/include/linux/device_cgroup.h
@@ -2,8 +2,16 @@
#include <linux/fs.h>
#ifdef CONFIG_CGROUP_DEVICE
-extern int devcgroup_inode_permission(struct inode *inode, int mask);
+extern int __devcgroup_inode_permission(struct inode *inode, int mask);
extern int devcgroup_inode_mknod(int mode, dev_t dev);
+static inline int devcgroup_inode_permission(struct inode *inode, int mask)
+{
+ if (likely(!inode->i_rdev))
+ return 0;
+ if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
+ return 0;
+ return __devcgroup_inode_permission(inode, mask);
+}
#else
static inline int devcgroup_inode_permission(struct inode *inode, int mask)
{ return 0; }
diff --git a/include/linux/drbd_limits.h b/include/linux/drbd_limits.h
index 246f576..447c367 100644
--- a/include/linux/drbd_limits.h
+++ b/include/linux/drbd_limits.h
@@ -117,10 +117,10 @@
/* drbdsetup XY resize -d Z
* you are free to reduce the device size to nothing, if you want to.
* the upper limit with 64bit kernel, enough ram and flexible meta data
- * is 16 TB, currently. */
+ * is 1 PiB, currently. */
/* DRBD_MAX_SECTORS */
#define DRBD_DISK_SIZE_SECT_MIN 0
-#define DRBD_DISK_SIZE_SECT_MAX (16 * (2LLU << 30))
+#define DRBD_DISK_SIZE_SECT_MAX (1 * (2LLU << 40))
#define DRBD_DISK_SIZE_SECT_DEF 0 /* = disabled = no user size... */
#define DRBD_ON_IO_ERROR_DEF EP_PASS_ON
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index c6a850a..439b173 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -268,7 +268,7 @@
__u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
- * being true) the user may set 'autonet' here non-zero to have the
+ * being true) the user may set 'autoneg' here non-zero to have the
* pause parameters be auto-negotiated too. In such a case, the
* {rx,tx}_pause values below determine what capabilities are
* advertised.
@@ -811,7 +811,7 @@
* @get_tx_csum: Deprecated as redundant. Report whether transmit checksums
* are turned on or off.
* @set_tx_csum: Deprecated in favour of generic netdev features. Turn
- * transmit checksums on or off. Returns a egative error code or zero.
+ * transmit checksums on or off. Returns a negative error code or zero.
* @get_sg: Deprecated as redundant. Report whether scatter-gather is
* enabled.
* @set_sg: Deprecated in favour of generic netdev features. Turn
@@ -1087,7 +1087,7 @@
/* The following are all involved in forcing a particular link
* mode for the device for setting things. When getting the
* devices settings, these indicate the current mode and whether
- * it was foced up into this mode or autonegotiated.
+ * it was forced up into this mode or autonegotiated.
*/
/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index c55d6b7..b5b9792 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -208,6 +208,7 @@
#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */
#define MS_I_VERSION (1<<23) /* Update inode I_version field */
#define MS_STRICTATIME (1<<24) /* Always perform atime updates */
+#define MS_NOSEC (1<<28)
#define MS_BORN (1<<29)
#define MS_ACTIVE (1<<30)
#define MS_NOUSER (1<<31)
@@ -638,6 +639,7 @@
struct prio_tree_root i_mmap; /* tree of private and shared mappings */
struct list_head i_mmap_nonlinear;/*list VM_NONLINEAR mappings */
struct mutex i_mmap_mutex; /* protect tree, count, list */
+ /* Protected by tree_lock together with the radix tree */
unsigned long nrpages; /* number of total pages */
pgoff_t writeback_index;/* writeback starts here */
const struct address_space_operations *a_ops; /* methods */
@@ -743,9 +745,13 @@
spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */
unsigned int i_flags;
+ unsigned long i_state;
+#ifdef CONFIG_SECURITY
+ void *i_security;
+#endif
struct mutex i_mutex;
- unsigned long i_state;
+
unsigned long dirtied_when; /* jiffies of first dirtying */
struct hlist_node i_hash;
@@ -797,9 +803,6 @@
atomic_t i_readcount; /* struct files open RO */
#endif
atomic_t i_writecount;
-#ifdef CONFIG_SECURITY
- void *i_security;
-#endif
#ifdef CONFIG_FS_POSIX_ACL
struct posix_acl *i_acl;
struct posix_acl *i_default_acl;
@@ -2591,7 +2594,7 @@
static inline void inode_has_no_xattr(struct inode *inode)
{
- if (!is_sxid(inode->i_mode))
+ if (!is_sxid(inode->i_mode) && (inode->i_sb->s_flags & MS_NOSEC))
inode->i_flags |= S_NOSEC;
}
diff --git a/include/linux/fscache.h b/include/linux/fscache.h
index 7c4d72f..9ec20de 100644
--- a/include/linux/fscache.h
+++ b/include/linux/fscache.h
@@ -204,6 +204,8 @@
extern void __fscache_wait_on_page_write(struct fscache_cookie *, struct page *);
extern bool __fscache_maybe_release_page(struct fscache_cookie *, struct page *,
gfp_t);
+extern void __fscache_uncache_all_inode_pages(struct fscache_cookie *,
+ struct inode *);
/**
* fscache_register_netfs - Register a filesystem as desiring caching services
@@ -643,4 +645,23 @@
return false;
}
+/**
+ * fscache_uncache_all_inode_pages - Uncache all an inode's pages
+ * @cookie: The cookie representing the inode's cache object.
+ * @inode: The inode to uncache pages from.
+ *
+ * Uncache all the pages in an inode that are marked PG_fscache, assuming them
+ * to be associated with the given cookie.
+ *
+ * This function may sleep. It will wait for pages that are being written out
+ * and will wait whilst the PG_fscache mark is removed by the cache.
+ */
+static inline
+void fscache_uncache_all_inode_pages(struct fscache_cookie *cookie,
+ struct inode *inode)
+{
+ if (fscache_cookie_valid(cookie))
+ __fscache_uncache_all_inode_pages(cookie, inode);
+}
+
#endif /* _LINUX_FSCACHE_H */
diff --git a/include/linux/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h
index 781d467..daa9952 100644
--- a/include/linux/fsl-diu-fb.h
+++ b/include/linux/fsl-diu-fb.h
@@ -24,12 +24,6 @@
* See mpc8610fb_set_par(), map_video_memory(), and unmap_video_memory()
*/
#define MEM_ALLOC_THRESHOLD (1024*768*4+32)
-/* Minimum value that the pixel clock can be set to in pico seconds
- * This is determined by platform clock/3 where the minimum platform
- * clock is 533MHz. This gives 5629 pico seconds.
- */
-#define MIN_PIX_CLK 5629
-#define MAX_PIX_CLK 96096
#include <linux/types.h>
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 32d47e7..17b5a0d 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -3,6 +3,17 @@
/* see Documentation/gpio.txt */
+/* make these flag values available regardless of GPIO kconfig options */
+#define GPIOF_DIR_OUT (0 << 0)
+#define GPIOF_DIR_IN (1 << 0)
+
+#define GPIOF_INIT_LOW (0 << 1)
+#define GPIOF_INIT_HIGH (1 << 1)
+
+#define GPIOF_IN (GPIOF_DIR_IN)
+#define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW)
+#define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH)
+
#ifdef CONFIG_GENERIC_GPIO
#include <asm/gpio.h>
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 51932e5..fd0dc30 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -135,6 +135,7 @@
* @cpu_base: per cpu clock base
* @index: clock type index for per_cpu support when moving a
* timer to a base on another cpu.
+ * @clockid: clock id for per_cpu support
* @active: red black tree root node for the active timers
* @resolution: the resolution of the clock, in nanoseconds
* @get_time: function to retrieve the current time of the clock
diff --git a/include/linux/i2c/adp8870.h b/include/linux/i2c/adp8870.h
new file mode 100644
index 0000000..624dcec
--- /dev/null
+++ b/include/linux/i2c/adp8870.h
@@ -0,0 +1,153 @@
+/*
+ * Definitions and platform data for Analog Devices
+ * Backlight drivers ADP8870
+ *
+ * Copyright 2009-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __LINUX_I2C_ADP8870_H
+#define __LINUX_I2C_ADP8870_H
+
+#define ID_ADP8870 8870
+
+#define ADP8870_MAX_BRIGHTNESS 0x7F
+#define FLAG_OFFT_SHIFT 8
+
+/*
+ * LEDs subdevice platform data
+ */
+
+#define ADP8870_LED_DIS_BLINK (0 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_600ms (1 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_1200ms (2 << FLAG_OFFT_SHIFT)
+#define ADP8870_LED_OFFT_1800ms (3 << FLAG_OFFT_SHIFT)
+
+#define ADP8870_LED_ONT_200ms 0
+#define ADP8870_LED_ONT_600ms 1
+#define ADP8870_LED_ONT_800ms 2
+#define ADP8870_LED_ONT_1200ms 3
+
+#define ADP8870_LED_D7 (7)
+#define ADP8870_LED_D6 (6)
+#define ADP8870_LED_D5 (5)
+#define ADP8870_LED_D4 (4)
+#define ADP8870_LED_D3 (3)
+#define ADP8870_LED_D2 (2)
+#define ADP8870_LED_D1 (1)
+
+/*
+ * Backlight subdevice platform data
+ */
+
+#define ADP8870_BL_D7 (1 << 6)
+#define ADP8870_BL_D6 (1 << 5)
+#define ADP8870_BL_D5 (1 << 4)
+#define ADP8870_BL_D4 (1 << 3)
+#define ADP8870_BL_D3 (1 << 2)
+#define ADP8870_BL_D2 (1 << 1)
+#define ADP8870_BL_D1 (1 << 0)
+
+#define ADP8870_FADE_T_DIS 0 /* Fade Timer Disabled */
+#define ADP8870_FADE_T_300ms 1 /* 0.3 Sec */
+#define ADP8870_FADE_T_600ms 2
+#define ADP8870_FADE_T_900ms 3
+#define ADP8870_FADE_T_1200ms 4
+#define ADP8870_FADE_T_1500ms 5
+#define ADP8870_FADE_T_1800ms 6
+#define ADP8870_FADE_T_2100ms 7
+#define ADP8870_FADE_T_2400ms 8
+#define ADP8870_FADE_T_2700ms 9
+#define ADP8870_FADE_T_3000ms 10
+#define ADP8870_FADE_T_3500ms 11
+#define ADP8870_FADE_T_4000ms 12
+#define ADP8870_FADE_T_4500ms 13
+#define ADP8870_FADE_T_5000ms 14
+#define ADP8870_FADE_T_5500ms 15 /* 5.5 Sec */
+
+#define ADP8870_FADE_LAW_LINEAR 0
+#define ADP8870_FADE_LAW_SQUARE 1
+#define ADP8870_FADE_LAW_CUBIC1 2
+#define ADP8870_FADE_LAW_CUBIC2 3
+
+#define ADP8870_BL_AMBL_FILT_80ms 0 /* Light sensor filter time */
+#define ADP8870_BL_AMBL_FILT_160ms 1
+#define ADP8870_BL_AMBL_FILT_320ms 2
+#define ADP8870_BL_AMBL_FILT_640ms 3
+#define ADP8870_BL_AMBL_FILT_1280ms 4
+#define ADP8870_BL_AMBL_FILT_2560ms 5
+#define ADP8870_BL_AMBL_FILT_5120ms 6
+#define ADP8870_BL_AMBL_FILT_10240ms 7 /* 10.24 sec */
+
+/*
+ * Blacklight current 0..30mA
+ */
+#define ADP8870_BL_CUR_mA(I) ((I * 127) / 30)
+
+/*
+ * L2 comparator current 0..1106uA
+ */
+#define ADP8870_L2_COMP_CURR_uA(I) ((I * 255) / 1106)
+
+/*
+ * L3 comparator current 0..551uA
+ */
+#define ADP8870_L3_COMP_CURR_uA(I) ((I * 255) / 551)
+
+/*
+ * L4 comparator current 0..275uA
+ */
+#define ADP8870_L4_COMP_CURR_uA(I) ((I * 255) / 275)
+
+/*
+ * L5 comparator current 0..138uA
+ */
+#define ADP8870_L5_COMP_CURR_uA(I) ((I * 255) / 138)
+
+struct adp8870_backlight_platform_data {
+ u8 bl_led_assign; /* 1 = Backlight 0 = Individual LED */
+ u8 pwm_assign; /* 1 = Enables PWM mode */
+
+ u8 bl_fade_in; /* Backlight Fade-In Timer */
+ u8 bl_fade_out; /* Backlight Fade-Out Timer */
+ u8 bl_fade_law; /* fade-on/fade-off transfer characteristic */
+
+ u8 en_ambl_sens; /* 1 = enable ambient light sensor */
+ u8 abml_filt; /* Light sensor filter time */
+
+ u8 l1_daylight_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l1_daylight_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l2_bright_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l2_bright_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l3_office_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l3_office_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l4_indoor_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l4_indor_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l5_dark_max; /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ u8 l5_dark_dim; /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+ u8 l2_trip; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ u8 l2_hyst; /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ u8 l3_trip; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+ u8 l3_hyst; /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+ u8 l4_trip; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+ u8 l4_hyst; /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+ u8 l5_trip; /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+ u8 l5_hyst; /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+
+ /**
+ * Independent Current Sinks / LEDS
+ * Sinks not assigned to the Backlight can be exposed to
+ * user space using the LEDS CLASS interface
+ */
+
+ int num_leds;
+ struct led_info *leds;
+ u8 led_fade_in; /* LED Fade-In Timer */
+ u8 led_fade_out; /* LED Fade-Out Timer */
+ u8 led_fade_law; /* fade-on/fade-off transfer characteristic */
+ u8 led_on_time;
+};
+
+#endif /* __LINUX_I2C_ADP8870_H */
diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h
index 6d66ce1..7b31863 100644
--- a/include/linux/if_packet.h
+++ b/include/linux/if_packet.h
@@ -62,6 +62,7 @@
__u16 tp_mac;
__u16 tp_net;
__u16 tp_vlan_tci;
+ __u16 tp_padding;
};
/* Rx ring - header status */
@@ -101,6 +102,7 @@
__u32 tp_sec;
__u32 tp_nsec;
__u16 tp_vlan_tci;
+ __u16 tp_padding;
};
#define TPACKET2_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index dc01681..affa273 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -225,7 +225,7 @@
}
/**
- * __vlan_put_tag - regular VLAN tag inserting
+ * vlan_insert_tag - regular VLAN tag inserting
* @skb: skbuff to tag
* @vlan_tci: VLAN TCI to insert
*
@@ -234,8 +234,10 @@
*
* Following the skb_unshare() example, in case of error, the calling function
* doesn't have to worry about freeing the original skb.
+ *
+ * Does not change skb->protocol so this function can be used during receive.
*/
-static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, u16 vlan_tci)
+static inline struct sk_buff *vlan_insert_tag(struct sk_buff *skb, u16 vlan_tci)
{
struct vlan_ethhdr *veth;
@@ -255,8 +257,25 @@
/* now, the TCI */
veth->h_vlan_TCI = htons(vlan_tci);
- skb->protocol = htons(ETH_P_8021Q);
+ return skb;
+}
+/**
+ * __vlan_put_tag - regular VLAN tag inserting
+ * @skb: skbuff to tag
+ * @vlan_tci: VLAN TCI to insert
+ *
+ * Inserts the VLAN tag into @skb as part of the payload
+ * Returns a VLAN tagged skb. If a new skb is created, @skb is freed.
+ *
+ * Following the skb_unshare() example, in case of error, the calling function
+ * doesn't have to worry about freeing the original skb.
+ */
+static inline struct sk_buff *__vlan_put_tag(struct sk_buff *skb, u16 vlan_tci)
+{
+ skb = vlan_insert_tag(skb, vlan_tci);
+ if (skb)
+ skb->protocol = htons(ETH_P_8021Q);
return skb;
}
diff --git a/include/linux/input/sh_keysc.h b/include/linux/input/sh_keysc.h
index 649dc7f..5d253cd 100644
--- a/include/linux/input/sh_keysc.h
+++ b/include/linux/input/sh_keysc.h
@@ -1,7 +1,7 @@
#ifndef __SH_KEYSC_H__
#define __SH_KEYSC_H__
-#define SH_KEYSC_MAXKEYS 49
+#define SH_KEYSC_MAXKEYS 64
struct sh_keysc_info {
enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3,
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 6c12989..f6efed0 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -414,6 +414,7 @@
TASKLET_SOFTIRQ,
SCHED_SOFTIRQ,
HRTIMER_SOFTIRQ,
+ RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */
NR_SOFTIRQS
};
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 8b45384..baa397e 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -676,7 +676,8 @@
void irq_gc_mask_set_bit(struct irq_data *d);
void irq_gc_mask_clr_bit(struct irq_data *d);
void irq_gc_unmask_enable_reg(struct irq_data *d);
-void irq_gc_ack(struct irq_data *d);
+void irq_gc_ack_set_bit(struct irq_data *d);
+void irq_gc_ack_clr_bit(struct irq_data *d);
void irq_gc_mask_disable_reg_and_ack(struct irq_data *d);
void irq_gc_eoi(struct irq_data *d);
int irq_gc_set_wake(struct irq_data *d, unsigned int on);
diff --git a/include/linux/irqreturn.h b/include/linux/irqreturn.h
index 819acaa..714ba08 100644
--- a/include/linux/irqreturn.h
+++ b/include/linux/irqreturn.h
@@ -8,9 +8,9 @@
* @IRQ_WAKE_THREAD handler requests to wake the handler thread
*/
enum irqreturn {
- IRQ_NONE,
- IRQ_HANDLED,
- IRQ_WAKE_THREAD,
+ IRQ_NONE = (0 << 0),
+ IRQ_HANDLED = (1 << 0),
+ IRQ_WAKE_THREAD = (1 << 1),
};
typedef enum irqreturn irqreturn_t;
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 4ecb7b1..d087c2e 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1024,7 +1024,6 @@
/* Filing buffers */
extern void jbd2_journal_unfile_buffer(journal_t *, struct journal_head *);
-extern void __jbd2_journal_unfile_buffer(struct journal_head *);
extern void __jbd2_journal_refile_buffer(struct journal_head *);
extern void jbd2_journal_refile_buffer(journal_t *, struct journal_head *);
extern void __jbd2_journal_file_buffer(struct journal_head *, transaction_t *, int);
@@ -1165,7 +1164,6 @@
*/
struct journal_head *jbd2_journal_add_journal_head(struct buffer_head *bh);
struct journal_head *jbd2_journal_grab_journal_head(struct buffer_head *bh);
-void jbd2_journal_remove_journal_head(struct buffer_head *bh);
void jbd2_journal_put_journal_head(struct journal_head *jh);
/*
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index fb0e732..953352a 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -671,8 +671,8 @@
#ifdef __CHECKER__
#define BUILD_BUG_ON_NOT_POWER_OF_2(n)
-#define BUILD_BUG_ON_ZERO(e)
-#define BUILD_BUG_ON_NULL(e)
+#define BUILD_BUG_ON_ZERO(e) (0)
+#define BUILD_BUG_ON_NULL(e) ((void*)0)
#define BUILD_BUG_ON(condition)
#else /* __CHECKER__ */
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index d4a5c84..0da38cf 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -45,7 +45,7 @@
#endif
-struct key;
+struct cred;
struct file;
enum umh_wait {
@@ -62,7 +62,7 @@
char **envp;
enum umh_wait wait;
int retval;
- int (*init)(struct subprocess_info *info);
+ int (*init)(struct subprocess_info *info, struct cred *new);
void (*cleanup)(struct subprocess_info *info);
void *data;
};
@@ -73,7 +73,7 @@
/* Set various pieces of state into the subprocess_info structure */
void call_usermodehelper_setfns(struct subprocess_info *info,
- int (*init)(struct subprocess_info *info),
+ int (*init)(struct subprocess_info *info, struct cred *new),
void (*cleanup)(struct subprocess_info *info),
void *data);
@@ -87,7 +87,7 @@
static inline int
call_usermodehelper_fns(char *path, char **argv, char **envp,
enum umh_wait wait,
- int (*init)(struct subprocess_info *info),
+ int (*init)(struct subprocess_info *info, struct cred *new),
void (*cleanup)(struct subprocess_info *), void *data)
{
struct subprocess_info *info;
diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h
index 2a0d7d6..ee0c952 100644
--- a/include/linux/kmsg_dump.h
+++ b/include/linux/kmsg_dump.h
@@ -12,6 +12,7 @@
#ifndef _LINUX_KMSG_DUMP_H
#define _LINUX_KMSG_DUMP_H
+#include <linux/errno.h>
#include <linux/list.h>
enum kmsg_dump_reason {
diff --git a/include/linux/kobject_ns.h b/include/linux/kobject_ns.h
index 82cb5bf..f66b065 100644
--- a/include/linux/kobject_ns.h
+++ b/include/linux/kobject_ns.h
@@ -32,15 +32,17 @@
/*
* Callbacks so sysfs can determine namespaces
- * @current_ns: return calling task's namespace
+ * @grab_current_ns: return a new reference to calling task's namespace
* @netlink_ns: return namespace to which a sock belongs (right?)
* @initial_ns: return the initial namespace (i.e. init_net_ns)
+ * @drop_ns: drops a reference to namespace
*/
struct kobj_ns_type_operations {
enum kobj_ns_type type;
- const void *(*current_ns)(void);
+ void *(*grab_current_ns)(void);
const void *(*netlink_ns)(struct sock *sk);
const void *(*initial_ns)(void);
+ void (*drop_ns)(void *);
};
int kobj_ns_type_register(const struct kobj_ns_type_operations *ops);
@@ -48,9 +50,9 @@
const struct kobj_ns_type_operations *kobj_child_ns_ops(struct kobject *parent);
const struct kobj_ns_type_operations *kobj_ns_ops(struct kobject *kobj);
-const void *kobj_ns_current(enum kobj_ns_type type);
+void *kobj_ns_grab_current(enum kobj_ns_type type);
const void *kobj_ns_netlink(enum kobj_ns_type type, struct sock *sk);
const void *kobj_ns_initial(enum kobj_ns_type type);
-void kobj_ns_exit(enum kobj_ns_type type, const void *ns);
+void kobj_ns_drop(enum kobj_ns_type type, void *ns);
#endif /* _LINUX_KOBJECT_NS_H */
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 9724a38..50940da 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -84,6 +84,7 @@
extern struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page);
extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p);
+extern struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm);
static inline
int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup)
@@ -246,6 +247,11 @@
return NULL;
}
+static inline struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
+{
+ return NULL;
+}
+
static inline int mm_match_cgroup(struct mm_struct *mm, struct mem_cgroup *mem)
{
return 1;
diff --git a/include/linux/memory.h b/include/linux/memory.h
index e1e3b2b..935699b 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -20,6 +20,8 @@
#include <linux/compiler.h>
#include <linux/mutex.h>
+#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS)
+
struct memory_block {
unsigned long start_section_nr;
unsigned long end_section_nr;
diff --git a/include/linux/mfd/ds1wm.h b/include/linux/mfd/ds1wm.h
index be469a3..38a372a 100644
--- a/include/linux/mfd/ds1wm.h
+++ b/include/linux/mfd/ds1wm.h
@@ -3,4 +3,11 @@
struct ds1wm_driver_data {
int active_high;
int clock_rate;
+ /* in milliseconds, the amount of time to */
+ /* sleep following a reset pulse. Zero */
+ /* should work if your bus devices recover*/
+ /* time respects the 1-wire spec since the*/
+ /* ds1wm implements the precise timings of*/
+ /* a reset pulse/presence detect sequence.*/
+ unsigned int reset_recover_delay;
};
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index c6927a4..6ad4355 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -64,6 +64,19 @@
unsigned long long enhanced_area_offset; /* Units: Byte */
unsigned int enhanced_area_size; /* Units: KB */
unsigned int boot_size; /* in bytes */
+ u8 raw_partition_support; /* 160 */
+ u8 raw_erased_mem_count; /* 181 */
+ u8 raw_ext_csd_structure; /* 194 */
+ u8 raw_card_type; /* 196 */
+ u8 raw_s_a_timeout; /* 217 */
+ u8 raw_hc_erase_gap_size; /* 221 */
+ u8 raw_erase_timeout_mult; /* 223 */
+ u8 raw_hc_erase_grp_size; /* 224 */
+ u8 raw_sec_trim_mult; /* 229 */
+ u8 raw_sec_erase_mult; /* 230 */
+ u8 raw_sec_feature_support;/* 231 */
+ u8 raw_trim_mult; /* 232 */
+ u8 raw_sectors[4]; /* 212 - 4 bytes */
};
struct sd_scr {
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index c928dac..9f7c3eb 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -647,6 +647,13 @@
#endif
#define nid_page_nr(nid, pagenr) pgdat_page_nr(NODE_DATA(nid),(pagenr))
+#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
+
+#define node_end_pfn(nid) ({\
+ pg_data_t *__pgdat = NODE_DATA(nid);\
+ __pgdat->node_start_pfn + __pgdat->node_spanned_pages;\
+})
+
#include <linux/memory_hotplug.h>
extern struct mutex zonelists_mutex;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index ca333e7..9e19477 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1097,12 +1097,6 @@
#define NETIF_F_ALL_FCOE (NETIF_F_FCOE_CRC | NETIF_F_FCOE_MTU | \
NETIF_F_FSO)
-#define NETIF_F_ALL_TX_OFFLOADS (NETIF_F_ALL_CSUM | NETIF_F_SG | \
- NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
- NETIF_F_HIGHDMA | \
- NETIF_F_SCTP_CSUM | \
- NETIF_F_ALL_FCOE)
-
/*
* If one device supports one of these features, then enable them
* for all in netdev_increment_features.
@@ -2555,7 +2549,7 @@
extern struct kobj_ns_type_operations net_ns_type_operations;
-extern char *netdev_drivername(const struct net_device *dev, char *buffer, int len);
+extern const char *netdev_drivername(const struct net_device *dev);
extern void linkwatch_run_queue(void);
diff --git a/include/linux/netfilter/nf_conntrack_common.h b/include/linux/netfilter/nf_conntrack_common.h
index 50cdc25..0d3dd66 100644
--- a/include/linux/netfilter/nf_conntrack_common.h
+++ b/include/linux/netfilter/nf_conntrack_common.h
@@ -18,6 +18,9 @@
/* >= this indicates reply direction */
IP_CT_IS_REPLY,
+ IP_CT_ESTABLISHED_REPLY = IP_CT_ESTABLISHED + IP_CT_IS_REPLY,
+ IP_CT_RELATED_REPLY = IP_CT_RELATED + IP_CT_IS_REPLY,
+ IP_CT_NEW_REPLY = IP_CT_NEW + IP_CT_IS_REPLY,
/* Number of distinct IP_CT types (no NEW in reply dirn). */
IP_CT_NUMBER = IP_CT_IS_REPLY * 2 - 1
};
diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h
index 3a34e80..25311b3 100644
--- a/include/linux/nfs_page.h
+++ b/include/linux/nfs_page.h
@@ -92,6 +92,9 @@
struct nfs_page *);
extern void nfs_pageio_complete(struct nfs_pageio_descriptor *desc);
extern void nfs_pageio_cond_complete(struct nfs_pageio_descriptor *, pgoff_t);
+extern bool nfs_generic_pg_test(struct nfs_pageio_descriptor *desc,
+ struct nfs_page *prev,
+ struct nfs_page *req);
extern int nfs_wait_on_request(struct nfs_page *);
extern void nfs_unlock_request(struct nfs_page *req);
extern int nfs_set_page_tag_locked(struct nfs_page *req);
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index 5e8444a..00848d8 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -158,7 +158,6 @@
/* nfs41 sessions channel attributes */
struct nfs4_channel_attrs {
- u32 headerpadsz;
u32 max_rqst_sz;
u32 max_resp_sz;
u32 max_resp_sz_cached;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index a311008..f8910e1 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1537,6 +1537,7 @@
#define PCI_DEVICE_ID_RICOH_RL5C476 0x0476
#define PCI_DEVICE_ID_RICOH_RL5C478 0x0478
#define PCI_DEVICE_ID_RICOH_R5C822 0x0822
+#define PCI_DEVICE_ID_RICOH_R5CE823 0xe823
#define PCI_DEVICE_ID_RICOH_R5C832 0x0832
#define PCI_DEVICE_ID_RICOH_R5C843 0x0843
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index 8b97308..9ca008f 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -259,6 +259,9 @@
* Special handling for cmpxchg_double. cmpxchg_double is passed two
* percpu variables. The first has to be aligned to a double word
* boundary and the second has to follow directly thereafter.
+ * We enforce this on all architectures even if they don't support
+ * a double cmpxchg instruction, since it's a cheap requirement, and it
+ * avoids breaking the requirement for architectures with the instruction.
*/
#define __pcpu_double_call_return_bool(stem, pcp1, pcp2, ...) \
({ \
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 3412684..e0786e3 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -137,14 +137,14 @@
*
* struct read_format {
* { u64 value;
- * { u64 time_enabled; } && PERF_FORMAT_ENABLED
- * { u64 time_running; } && PERF_FORMAT_RUNNING
+ * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
* { u64 id; } && PERF_FORMAT_ID
* } && !PERF_FORMAT_GROUP
*
* { u64 nr;
- * { u64 time_enabled; } && PERF_FORMAT_ENABLED
- * { u64 time_running; } && PERF_FORMAT_RUNNING
+ * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
* { u64 value;
* { u64 id; } && PERF_FORMAT_ID
* } cntr[nr];
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 3160648..411e4f4 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -425,7 +425,8 @@
pm_message_t power_state;
unsigned int can_wakeup:1;
unsigned int async_suspend:1;
- unsigned int in_suspend:1; /* Owned by the PM core */
+ bool is_prepared:1; /* Owned by the PM core */
+ bool is_suspended:1; /* Ditto */
spinlock_t lock;
#ifdef CONFIG_PM_SLEEP
struct list_head entry;
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 2a8621c..14a6c7b 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -808,7 +808,7 @@
* when BITS_PER_LONG <= 32 are pretty high and the returns do not justify the
* increased costs.
*/
-#if BITS_PER_LONG > 32
+#if 0 /* BITS_PER_LONG > 32 -- currently broken: it increases power usage under light load */
# define SCHED_LOAD_RESOLUTION 10
# define scale_load(w) ((w) << SCHED_LOAD_RESOLUTION)
# define scale_load_down(w) ((w) >> SCHED_LOAD_RESOLUTION)
@@ -844,6 +844,7 @@
#define SD_SERIALIZE 0x0400 /* Only a single load balancing instance */
#define SD_ASYM_PACKING 0x0800 /* Place busy groups earlier in the domain */
#define SD_PREFER_SIBLING 0x1000 /* Prefer to place tasks in a sibling domain */
+#define SD_OVERLAP 0x2000 /* sched_domains of this level overlap */
enum powersavings_balance_level {
POWERSAVINGS_BALANCE_NONE = 0, /* No power saving load balance */
@@ -893,16 +894,21 @@
return 0;
}
-struct sched_group {
- struct sched_group *next; /* Must be a circular list */
+struct sched_group_power {
atomic_t ref;
-
/*
* CPU power of this group, SCHED_LOAD_SCALE being max power for a
* single CPU.
*/
- unsigned int cpu_power, cpu_power_orig;
+ unsigned int power, power_orig;
+};
+
+struct sched_group {
+ struct sched_group *next; /* Must be a circular list */
+ atomic_t ref;
+
unsigned int group_weight;
+ struct sched_group_power *sgp;
/*
* The CPUs this group covers.
@@ -1063,6 +1069,7 @@
*/
#define WF_SYNC 0x01 /* waker goes to sleep after wakup */
#define WF_FORK 0x02 /* child wakeup after fork */
+#define WF_MIGRATED 0x04 /* internal use, task got migrated */
#define ENQUEUE_WAKEUP 1
#define ENQUEUE_HEAD 2
@@ -1253,6 +1260,9 @@
#ifdef CONFIG_PREEMPT_RCU
int rcu_read_lock_nesting;
char rcu_read_unlock_special;
+#if defined(CONFIG_RCU_BOOST) && defined(CONFIG_TREE_PREEMPT_RCU)
+ int rcu_boosted;
+#endif /* #if defined(CONFIG_RCU_BOOST) && defined(CONFIG_TREE_PREEMPT_RCU) */
struct list_head rcu_node_entry;
#endif /* #ifdef CONFIG_PREEMPT_RCU */
#ifdef CONFIG_TREE_PREEMPT_RCU
diff --git a/include/linux/sdla.h b/include/linux/sdla.h
index 564acd3..9995c7f 100644
--- a/include/linux/sdla.h
+++ b/include/linux/sdla.h
@@ -112,11 +112,7 @@
short Tb_max;
};
-#ifndef __KERNEL__
-
-void sdla(void *cfg_info, char *dev, struct frad_conf *conf, int quiet);
-
-#else
+#ifdef __KERNEL__
/* important Z80 window addresses */
#define SDLA_CONTROL_WND 0xE000
diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index e981189..c6db9fb 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -28,6 +28,7 @@
#include <linux/spinlock.h>
#include <linux/preempt.h>
+#include <asm/processor.h>
typedef struct {
unsigned sequence;
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
index 2b7fec8..aa08fa8 100644
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -3,6 +3,7 @@
#include <linux/swap.h>
#include <linux/mempolicy.h>
+#include <linux/pagemap.h>
#include <linux/percpu_counter.h>
/* inode in-kernel data */
@@ -45,7 +46,27 @@
return container_of(inode, struct shmem_inode_info, vfs_inode);
}
+/*
+ * Functions in mm/shmem.c called directly from elsewhere:
+ */
extern int init_tmpfs(void);
extern int shmem_fill_super(struct super_block *sb, void *data, int silent);
+extern struct file *shmem_file_setup(const char *name,
+ loff_t size, unsigned long flags);
+extern int shmem_zero_setup(struct vm_area_struct *);
+extern int shmem_lock(struct file *file, int lock, struct user_struct *user);
+extern struct page *shmem_read_mapping_page_gfp(struct address_space *mapping,
+ pgoff_t index, gfp_t gfp_mask);
+extern void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end);
+extern int shmem_unuse(swp_entry_t entry, struct page *page);
+extern void mem_cgroup_get_shmem_target(struct inode *inode, pgoff_t pgoff,
+ struct page **pagep, swp_entry_t *ent);
+
+static inline struct page *shmem_read_mapping_page(
+ struct address_space *mapping, pgoff_t index)
+{
+ return shmem_read_mapping_page_gfp(mapping, index,
+ mapping_gfp_mask(mapping));
+}
#endif
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index e8b78ce..c0a4f3a 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1256,6 +1256,11 @@
skb->tail += len;
}
+static inline void skb_reset_mac_len(struct sk_buff *skb)
+{
+ skb->mac_len = skb->network_header - skb->mac_header;
+}
+
#ifdef NET_SKBUFF_DATA_USES_OFFSET
static inline unsigned char *skb_transport_header(const struct sk_buff *skb)
{
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 7ad824d..8cc38d3 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -85,12 +85,15 @@
* Generic and arch helpers
*/
#ifdef CONFIG_USE_GENERIC_SMP_HELPERS
+void __init call_function_init(void);
void generic_smp_call_function_single_interrupt(void);
void generic_smp_call_function_interrupt(void);
void ipi_call_lock(void);
void ipi_call_unlock(void);
void ipi_call_lock_irq(void);
void ipi_call_unlock_irq(void);
+#else
+static inline void call_function_init(void) { }
#endif
/*
@@ -134,7 +137,7 @@
#define smp_prepare_boot_cpu() do {} while (0)
#define smp_call_function_many(mask, func, info, wait) \
(up_smp_call_function(func, info))
-static inline void init_call_single_data(void) { }
+static inline void call_function_init(void) { }
static inline int
smp_call_function_any(const struct cpumask *mask, smp_call_func_t func,
diff --git a/include/linux/sunrpc/gss_krb5_enctypes.h b/include/linux/sunrpc/gss_krb5_enctypes.h
new file mode 100644
index 0000000..ec6234e
--- /dev/null
+++ b/include/linux/sunrpc/gss_krb5_enctypes.h
@@ -0,0 +1,4 @@
+/*
+ * Dumb way to share this static piece of information with nfsd
+ */
+#define KRB5_SUPPORTED_ENCTYPES "18,17,16,23,3,1,2"
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index f73c482..fe2d8e6 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -84,7 +84,8 @@
#endif
unsigned char tk_priority : 2,/* Task priority */
tk_garb_retry : 2,
- tk_cred_retry : 2;
+ tk_cred_retry : 2,
+ tk_rebind_retry : 2;
};
#define tk_xprt tk_client->cl_xprt
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 384eb5f..a273468 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -300,16 +300,6 @@
extern int kswapd_run(int nid);
extern void kswapd_stop(int nid);
-#ifdef CONFIG_MMU
-/* linux/mm/shmem.c */
-extern int shmem_unuse(swp_entry_t entry, struct page *page);
-#endif /* CONFIG_MMU */
-
-#ifdef CONFIG_CGROUP_MEM_RES_CTLR
-extern void mem_cgroup_get_shmem_target(struct inode *inode, pgoff_t pgoff,
- struct page **pagep, swp_entry_t *ent);
-#endif
-
#ifdef CONFIG_SWAP
/* linux/mm/page_io.c */
extern int swap_readpage(struct page *);
@@ -358,6 +348,7 @@
extern struct mm_struct *swap_token_mm;
extern void grab_swap_token(struct mm_struct *);
extern void __put_swap_token(struct mm_struct *);
+extern void disable_swap_token(struct mem_cgroup *memcg);
static inline int has_swap_token(struct mm_struct *mm)
{
@@ -370,11 +361,6 @@
__put_swap_token(mm);
}
-static inline void disable_swap_token(void)
-{
- put_swap_token(swap_token_mm);
-}
-
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
extern void
mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent, bool swapout);
@@ -500,7 +486,7 @@
return 0;
}
-static inline void disable_swap_token(void)
+static inline void disable_swap_token(struct mem_cgroup *memcg)
{
}
diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
index 8c0e349..445702c 100644
--- a/include/linux/swiotlb.h
+++ b/include/linux/swiotlb.h
@@ -24,6 +24,7 @@
extern void swiotlb_init(int verbose);
extern void swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose);
+extern unsigned long swioltb_nr_tbl(void);
/*
* Enumeration for sync targets
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index c3acda6..e2696d7 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -177,9 +177,6 @@
struct sysfs_dirent *sysfs_get(struct sysfs_dirent *sd);
void sysfs_put(struct sysfs_dirent *sd);
-/* Called to clear a ns tag when it is no longer valid */
-void sysfs_exit_ns(enum kobj_ns_type type, const void *tag);
-
int __must_check sysfs_init(void);
#else /* CONFIG_SYSFS */
@@ -338,10 +335,6 @@
{
}
-static inline void sysfs_exit_ns(int type, const void *tag)
-{
-}
-
static inline int __must_check sysfs_init(void)
{
return 0;
diff --git a/include/linux/topology.h b/include/linux/topology.h
index b91a40e..fc839bf 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -60,7 +60,7 @@
* (in whatever arch specific measurement units returned by node_distance())
* then switch on zone reclaim on boot.
*/
-#define RECLAIM_DISTANCE 20
+#define RECLAIM_DISTANCE 30
#endif
#ifndef PENALTY_FOR_NODE_WITH_CPUS
#define PENALTY_FOR_NODE_WITH_CPUS (1)
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index 71693d4..17df360 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -62,7 +62,9 @@
US_FLAG(NO_READ_DISC_INFO, 0x00040000) \
/* cannot handle READ_DISC_INFO */ \
US_FLAG(NO_READ_CAPACITY_16, 0x00080000) \
- /* cannot handle READ_CAPACITY_16 */
+ /* cannot handle READ_CAPACITY_16 */ \
+ US_FLAG(INITIAL_READ10, 0x00100000) \
+ /* Initial READ(10) (and others) must be retried */
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
diff --git a/include/linux/uts.h b/include/linux/uts.h
index 73eb1ed..6ddbd86 100644
--- a/include/linux/uts.h
+++ b/include/linux/uts.h
@@ -9,7 +9,7 @@
#endif
#ifndef UTS_NODENAME
-#define UTS_NODENAME "(none)" /* set by sethostname() */
+#define UTS_NODENAME CONFIG_DEFAULT_HOSTNAME /* set by sethostname() */
#endif
#ifndef UTS_DOMAINNAME
diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h
index 630e702..168dd0b 100644
--- a/include/media/lirc_dev.h
+++ b/include/media/lirc_dev.h
@@ -9,7 +9,7 @@
#ifndef _LINUX_LIRC_DEV_H
#define _LINUX_LIRC_DEV_H
-#define MAX_IRCTL_DEVICES 4
+#define MAX_IRCTL_DEVICES 8
#define BUFLEN 16
#define mod(n, div) ((n) % (div))
diff --git a/include/media/m5mols.h b/include/media/m5mols.h
index 2d7e7ca..aac2c0e 100644
--- a/include/media/m5mols.h
+++ b/include/media/m5mols.h
@@ -2,10 +2,10 @@
* Driver header for M-5MOLS 8M Pixel camera sensor with ISP
*
* Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim, riverful.kim@samsung.com
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
*
* Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index 93e96fb..c7c40f1 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -128,8 +128,8 @@
struct mutex *lock;
};
-#define media_entity_to_video_device(entity) \
- container_of(entity, struct video_device, entity)
+#define media_entity_to_video_device(__e) \
+ container_of(__e, struct video_device, entity)
/* dev to video-device */
#define to_video_device(cd) container_of(cd, struct video_device, dev)
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 1562c4f..2884e3e 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -173,16 +173,20 @@
struct v4l2_event_subscription *sub);
};
-/* s_mode: switch the tuner to a specific tuner mode. Replacement of s_radio.
+/* s_radio: v4l device was opened in radio mode.
- s_radio: v4l device was opened in Radio mode, to be replaced by s_mode.
+ g_frequency: freq->type must be filled in. Normally done by video_ioctl2
+ or the bridge driver.
+
+ g_tuner:
+ s_tuner: vt->type must be filled in. Normally done by video_ioctl2 or the
+ bridge driver.
s_type_addr: sets tuner type and its I2C addr.
s_config: sets tda9887 specific stuff, like port1, port2 and qss
*/
struct v4l2_subdev_tuner_ops {
- int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type);
int (*s_radio)(struct v4l2_subdev *sd);
int (*s_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq);
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 0589f55..396e8fc 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2688,7 +2688,7 @@
* @dev: network device
* @addr: The source MAC address of the frame
* @key_type: The key type that the received frame used
- * @key_id: Key identifier (0..3)
+ * @key_id: Key identifier (0..3). Can be -1 if missing.
* @tsc: The TSC value of the frame that generated the MIC failure (6 octets)
* @gfp: allocation flags
*
diff --git a/include/net/dst.h b/include/net/dst.h
index 7d15d23..e12ddfb 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -77,6 +77,7 @@
#define DST_NOPOLICY 0x0004
#define DST_NOHASH 0x0008
#define DST_NOCACHE 0x0010
+#define DST_NOCOUNT 0x0020
union {
struct dst_entry *next;
struct rtable __rcu *rt_next;
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 2bf9ed9..aef430d 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -35,8 +35,11 @@
#define NETDEV_HASHENTRIES (1 << NETDEV_HASHBITS)
struct net {
+ atomic_t passive; /* To decided when the network
+ * namespace should be freed.
+ */
atomic_t count; /* To decided when the network
- * namespace should be freed.
+ * namespace should be shut down.
*/
#ifdef NETNS_REFCNT_DEBUG
atomic_t use_count; /* To track references we
@@ -154,6 +157,9 @@
{
return net1 == net2;
}
+
+extern void net_drop_ns(void *);
+
#else
static inline struct net *get_net(struct net *net)
@@ -175,6 +181,8 @@
{
return 1;
}
+
+#define net_drop_ns NULL
#endif
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index c7c42e7..5d4f8e5 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -307,6 +307,12 @@
return test_bit(IPS_UNTRACKED_BIT, &ct->status);
}
+/* Packet is received from loopback */
+static inline bool nf_is_loopback_packet(const struct sk_buff *skb)
+{
+ return skb->dev && skb->skb_iif && skb->dev->flags & IFF_LOOPBACK;
+}
+
extern int nf_conntrack_set_hashsize(const char *val, struct kernel_param *kp);
extern unsigned int nf_conntrack_htable_size;
extern unsigned int nf_conntrack_max;
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index dd6847e..6506458 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -63,6 +63,7 @@
SCTP_CMD_ECN_ECNE, /* Do delayed ECNE processing. */
SCTP_CMD_ECN_CWR, /* Do delayed CWR processing. */
SCTP_CMD_TIMER_START, /* Start a timer. */
+ SCTP_CMD_TIMER_START_ONCE, /* Start a timer once */
SCTP_CMD_TIMER_RESTART, /* Restart a timer. */
SCTP_CMD_TIMER_STOP, /* Stop a timer. */
SCTP_CMD_INIT_CHOOSE_TRANSPORT, /* Choose transport for an INIT. */
diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h
index 99b027b..ca4693b 100644
--- a/include/net/sctp/ulpevent.h
+++ b/include/net/sctp/ulpevent.h
@@ -80,7 +80,7 @@
void sctp_ulpevent_free(struct sctp_ulpevent *);
int sctp_ulpevent_is_notification(const struct sctp_ulpevent *);
-void sctp_queue_purge_ulpevents(struct sk_buff_head *list);
+unsigned int sctp_queue_purge_ulpevents(struct sk_buff_head *list);
struct sctp_ulpevent *sctp_ulpevent_make_assoc_change(
const struct sctp_association *asoc,
diff --git a/include/net/sock.h b/include/net/sock.h
index f2046e4..c0b938c 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -178,7 +178,6 @@
* @sk_dst_cache: destination cache
* @sk_dst_lock: destination cache lock
* @sk_policy: flow policy
- * @sk_rmem_alloc: receive queue bytes committed
* @sk_receive_queue: incoming packets
* @sk_wmem_alloc: transmit queue bytes committed
* @sk_write_queue: Packet sending queue
diff --git a/include/sound/sb16_csp.h b/include/sound/sb16_csp.h
index 736eac7..af1b49e 100644
--- a/include/sound/sb16_csp.h
+++ b/include/sound/sb16_csp.h
@@ -99,7 +99,14 @@
/* get CSP information */
#define SNDRV_SB_CSP_IOCTL_INFO _IOR('H', 0x10, struct snd_sb_csp_info)
/* load microcode to CSP */
-#define SNDRV_SB_CSP_IOCTL_LOAD_CODE _IOW('H', 0x11, struct snd_sb_csp_microcode)
+/* NOTE: struct snd_sb_csp_microcode overflows the max size (13 bits)
+ * defined for some architectures like MIPS, and it leads to build errors.
+ * (x86 and co have 14-bit size, thus it's valid, though.)
+ * As a workaround for skipping the size-limit check, here we don't use the
+ * normal _IOW() macro but _IOC() with the manual argument.
+ */
+#define SNDRV_SB_CSP_IOCTL_LOAD_CODE \
+ _IOC(_IOC_WRITE, 'H', 0x11, sizeof(struct snd_sb_csp_microcode))
/* unload microcode from CSP */
#define SNDRV_SB_CSP_IOCTL_UNLOAD_CODE _IO('H', 0x12)
/* start CSP */
diff --git a/include/sound/soc.h b/include/sound/soc.h
index f1de3e0..3a4bd3a 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -248,8 +248,7 @@
extern struct snd_ac97_bus_ops soc_ac97_ops;
enum snd_soc_control_type {
- SND_SOC_CUSTOM = 1,
- SND_SOC_I2C,
+ SND_SOC_I2C = 1,
SND_SOC_SPI,
};
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index e09592d..5ce2b2f 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -26,7 +26,7 @@
__field( umode_t, mode )
__field( uid_t, uid )
__field( gid_t, gid )
- __field( blkcnt_t, blocks )
+ __field( __u64, blocks )
),
TP_fast_assign(
@@ -40,9 +40,8 @@
TP_printk("dev %d,%d ino %lu mode 0%o uid %u gid %u blocks %llu",
MAJOR(__entry->dev), MINOR(__entry->dev),
- (unsigned long) __entry->ino,
- __entry->mode, __entry->uid, __entry->gid,
- (unsigned long long) __entry->blocks)
+ (unsigned long) __entry->ino, __entry->mode,
+ __entry->uid, __entry->gid, __entry->blocks)
);
TRACE_EVENT(ext4_request_inode,
@@ -178,7 +177,7 @@
TP_printk("dev %d,%d ino %lu new_size %lld",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- (long long) __entry->new_size)
+ __entry->new_size)
);
DECLARE_EVENT_CLASS(ext4__write_begin,
@@ -204,7 +203,7 @@
__entry->flags = flags;
),
- TP_printk("dev %d,%d ino %lu pos %llu len %u flags %u",
+ TP_printk("dev %d,%d ino %lu pos %lld len %u flags %u",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
__entry->pos, __entry->len, __entry->flags)
@@ -248,7 +247,7 @@
__entry->copied = copied;
),
- TP_printk("dev %d,%d ino %lu pos %llu len %u copied %u",
+ TP_printk("dev %d,%d ino %lu pos %lld len %u copied %u",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
__entry->pos, __entry->len, __entry->copied)
@@ -286,29 +285,6 @@
TP_ARGS(inode, pos, len, copied)
);
-TRACE_EVENT(ext4_writepage,
- TP_PROTO(struct inode *inode, struct page *page),
-
- TP_ARGS(inode, page),
-
- TP_STRUCT__entry(
- __field( dev_t, dev )
- __field( ino_t, ino )
- __field( pgoff_t, index )
-
- ),
-
- TP_fast_assign(
- __entry->dev = inode->i_sb->s_dev;
- __entry->ino = inode->i_ino;
- __entry->index = page->index;
- ),
-
- TP_printk("dev %d,%d ino %lu page_index %lu",
- MAJOR(__entry->dev), MINOR(__entry->dev),
- (unsigned long) __entry->ino, __entry->index)
-);
-
TRACE_EVENT(ext4_da_writepages,
TP_PROTO(struct inode *inode, struct writeback_control *wbc),
@@ -341,7 +317,7 @@
),
TP_printk("dev %d,%d ino %lu nr_to_write %ld pages_skipped %ld "
- "range_start %llu range_end %llu sync_mode %d"
+ "range_start %lld range_end %lld sync_mode %d"
"for_kupdate %d range_cyclic %d writeback_index %lu",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino, __entry->nr_to_write,
@@ -449,7 +425,14 @@
TP_printk("dev %d,%d ino %lu page_index %lu",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- __entry->index)
+ (unsigned long) __entry->index)
+);
+
+DEFINE_EVENT(ext4__page_op, ext4_writepage,
+
+ TP_PROTO(struct page *page),
+
+ TP_ARGS(page)
);
DEFINE_EVENT(ext4__page_op, ext4_readpage,
@@ -489,7 +472,7 @@
TP_printk("dev %d,%d ino %lu page_index %lu offset %lu",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- __entry->index, __entry->offset)
+ (unsigned long) __entry->index, __entry->offset)
);
TRACE_EVENT(ext4_discard_blocks,
@@ -562,12 +545,10 @@
);
TRACE_EVENT(ext4_mb_release_inode_pa,
- TP_PROTO(struct super_block *sb,
- struct inode *inode,
- struct ext4_prealloc_space *pa,
+ TP_PROTO(struct ext4_prealloc_space *pa,
unsigned long long block, unsigned int count),
- TP_ARGS(sb, inode, pa, block, count),
+ TP_ARGS(pa, block, count),
TP_STRUCT__entry(
__field( dev_t, dev )
@@ -578,8 +559,8 @@
),
TP_fast_assign(
- __entry->dev = sb->s_dev;
- __entry->ino = inode->i_ino;
+ __entry->dev = pa->pa_inode->i_sb->s_dev;
+ __entry->ino = pa->pa_inode->i_ino;
__entry->block = block;
__entry->count = count;
),
@@ -591,10 +572,9 @@
);
TRACE_EVENT(ext4_mb_release_group_pa,
- TP_PROTO(struct super_block *sb,
- struct ext4_prealloc_space *pa),
+ TP_PROTO(struct ext4_prealloc_space *pa),
- TP_ARGS(sb, pa),
+ TP_ARGS(pa),
TP_STRUCT__entry(
__field( dev_t, dev )
@@ -604,7 +584,7 @@
),
TP_fast_assign(
- __entry->dev = sb->s_dev;
+ __entry->dev = pa->pa_inode->i_sb->s_dev;
__entry->pa_pstart = pa->pa_pstart;
__entry->pa_len = pa->pa_len;
),
@@ -666,10 +646,10 @@
__field( ino_t, ino )
__field( unsigned int, flags )
__field( unsigned int, len )
- __field( __u64, logical )
+ __field( __u32, logical )
+ __field( __u32, lleft )
+ __field( __u32, lright )
__field( __u64, goal )
- __field( __u64, lleft )
- __field( __u64, lright )
__field( __u64, pleft )
__field( __u64, pright )
),
@@ -687,17 +667,13 @@
__entry->pright = ar->pright;
),
- TP_printk("dev %d,%d ino %lu flags %u len %u lblk %llu goal %llu "
- "lleft %llu lright %llu pleft %llu pright %llu ",
+ TP_printk("dev %d,%d ino %lu flags %u len %u lblk %u goal %llu "
+ "lleft %u lright %u pleft %llu pright %llu ",
MAJOR(__entry->dev), MINOR(__entry->dev),
- (unsigned long) __entry->ino,
- __entry->flags, __entry->len,
- (unsigned long long) __entry->logical,
- (unsigned long long) __entry->goal,
- (unsigned long long) __entry->lleft,
- (unsigned long long) __entry->lright,
- (unsigned long long) __entry->pleft,
- (unsigned long long) __entry->pright)
+ (unsigned long) __entry->ino, __entry->flags,
+ __entry->len, __entry->logical, __entry->goal,
+ __entry->lleft, __entry->lright, __entry->pleft,
+ __entry->pright)
);
TRACE_EVENT(ext4_allocate_blocks,
@@ -711,10 +687,10 @@
__field( __u64, block )
__field( unsigned int, flags )
__field( unsigned int, len )
- __field( __u64, logical )
+ __field( __u32, logical )
+ __field( __u32, lleft )
+ __field( __u32, lright )
__field( __u64, goal )
- __field( __u64, lleft )
- __field( __u64, lright )
__field( __u64, pleft )
__field( __u64, pright )
),
@@ -733,17 +709,13 @@
__entry->pright = ar->pright;
),
- TP_printk("dev %d,%d ino %lu flags %u len %u block %llu lblk %llu "
- "goal %llu lleft %llu lright %llu pleft %llu pright %llu",
+ TP_printk("dev %d,%d ino %lu flags %u len %u block %llu lblk %u "
+ "goal %llu lleft %u lright %u pleft %llu pright %llu",
MAJOR(__entry->dev), MINOR(__entry->dev),
- (unsigned long) __entry->ino,
- __entry->flags, __entry->len, __entry->block,
- (unsigned long long) __entry->logical,
- (unsigned long long) __entry->goal,
- (unsigned long long) __entry->lleft,
- (unsigned long long) __entry->lright,
- (unsigned long long) __entry->pleft,
- (unsigned long long) __entry->pright)
+ (unsigned long) __entry->ino, __entry->flags,
+ __entry->len, __entry->block, __entry->logical,
+ __entry->goal, __entry->lleft, __entry->lright,
+ __entry->pleft, __entry->pright)
);
TRACE_EVENT(ext4_free_blocks,
@@ -755,10 +727,10 @@
TP_STRUCT__entry(
__field( dev_t, dev )
__field( ino_t, ino )
- __field( umode_t, mode )
+ __field( umode_t, mode )
__field( __u64, block )
__field( unsigned long, count )
- __field( int, flags )
+ __field( int, flags )
),
TP_fast_assign(
@@ -798,7 +770,7 @@
__entry->parent = dentry->d_parent->d_inode->i_ino;
),
- TP_printk("dev %d,%d ino %ld parent %ld datasync %d ",
+ TP_printk("dev %d,%d ino %lu parent %lu datasync %d ",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
(unsigned long) __entry->parent, __entry->datasync)
@@ -821,7 +793,7 @@
__entry->dev = inode->i_sb->s_dev;
),
- TP_printk("dev %d,%d ino %ld ret %d",
+ TP_printk("dev %d,%d ino %lu ret %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
__entry->ret)
@@ -1005,7 +977,7 @@
__entry->result_len = len;
),
- TP_printk("dev %d,%d inode %lu extent %u/%d/%u ",
+ TP_printk("dev %d,%d inode %lu extent %u/%d/%d ",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
__entry->result_group, __entry->result_start,
@@ -1093,7 +1065,7 @@
"allocated_meta_blocks %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- __entry->mode, (unsigned long long) __entry->i_blocks,
+ __entry->mode, __entry->i_blocks,
__entry->used_blocks, __entry->reserved_data_blocks,
__entry->reserved_meta_blocks, __entry->allocated_meta_blocks)
);
@@ -1127,7 +1099,7 @@
"reserved_data_blocks %d reserved_meta_blocks %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- __entry->mode, (unsigned long long) __entry->i_blocks,
+ __entry->mode, __entry->i_blocks,
__entry->md_needed, __entry->reserved_data_blocks,
__entry->reserved_meta_blocks)
);
@@ -1164,7 +1136,7 @@
"allocated_meta_blocks %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- __entry->mode, (unsigned long long) __entry->i_blocks,
+ __entry->mode, __entry->i_blocks,
__entry->freed_blocks, __entry->reserved_data_blocks,
__entry->reserved_meta_blocks, __entry->allocated_meta_blocks)
);
@@ -1239,14 +1211,15 @@
__entry->rw = rw;
),
- TP_printk("dev %d,%d ino %lu pos %llu len %lu rw %d",
+ TP_printk("dev %d,%d ino %lu pos %lld len %lu rw %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- (unsigned long long) __entry->pos, __entry->len, __entry->rw)
+ __entry->pos, __entry->len, __entry->rw)
);
TRACE_EVENT(ext4_direct_IO_exit,
- TP_PROTO(struct inode *inode, loff_t offset, unsigned long len, int rw, int ret),
+ TP_PROTO(struct inode *inode, loff_t offset, unsigned long len,
+ int rw, int ret),
TP_ARGS(inode, offset, len, rw, ret),
@@ -1268,10 +1241,10 @@
__entry->ret = ret;
),
- TP_printk("dev %d,%d ino %lu pos %llu len %lu rw %d ret %d",
+ TP_printk("dev %d,%d ino %lu pos %lld len %lu rw %d ret %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- (unsigned long long) __entry->pos, __entry->len,
+ __entry->pos, __entry->len,
__entry->rw, __entry->ret)
);
@@ -1296,15 +1269,15 @@
__entry->mode = mode;
),
- TP_printk("dev %d,%d ino %ld pos %llu len %llu mode %d",
+ TP_printk("dev %d,%d ino %lu pos %lld len %lld mode %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
- (unsigned long) __entry->ino,
- (unsigned long long) __entry->pos,
- (unsigned long long) __entry->len, __entry->mode)
+ (unsigned long) __entry->ino, __entry->pos,
+ __entry->len, __entry->mode)
);
TRACE_EVENT(ext4_fallocate_exit,
- TP_PROTO(struct inode *inode, loff_t offset, unsigned int max_blocks, int ret),
+ TP_PROTO(struct inode *inode, loff_t offset,
+ unsigned int max_blocks, int ret),
TP_ARGS(inode, offset, max_blocks, ret),
@@ -1312,7 +1285,7 @@
__field( ino_t, ino )
__field( dev_t, dev )
__field( loff_t, pos )
- __field( unsigned, blocks )
+ __field( unsigned int, blocks )
__field( int, ret )
),
@@ -1324,10 +1297,10 @@
__entry->ret = ret;
),
- TP_printk("dev %d,%d ino %ld pos %llu blocks %d ret %d",
+ TP_printk("dev %d,%d ino %lu pos %lld blocks %u ret %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- (unsigned long long) __entry->pos, __entry->blocks,
+ __entry->pos, __entry->blocks,
__entry->ret)
);
@@ -1350,7 +1323,7 @@
__entry->dev = dentry->d_inode->i_sb->s_dev;
),
- TP_printk("dev %d,%d ino %ld size %lld parent %ld",
+ TP_printk("dev %d,%d ino %lu size %lld parent %lu",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino, __entry->size,
(unsigned long) __entry->parent)
@@ -1373,7 +1346,7 @@
__entry->ret = ret;
),
- TP_printk("dev %d,%d ino %ld ret %d",
+ TP_printk("dev %d,%d ino %lu ret %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
__entry->ret)
@@ -1387,7 +1360,7 @@
TP_STRUCT__entry(
__field( ino_t, ino )
__field( dev_t, dev )
- __field( blkcnt_t, blocks )
+ __field( __u64, blocks )
),
TP_fast_assign(
@@ -1396,9 +1369,9 @@
__entry->blocks = inode->i_blocks;
),
- TP_printk("dev %d,%d ino %lu blocks %lu",
+ TP_printk("dev %d,%d ino %lu blocks %llu",
MAJOR(__entry->dev), MINOR(__entry->dev),
- (unsigned long) __entry->ino, (unsigned long) __entry->blocks)
+ (unsigned long) __entry->ino, __entry->blocks)
);
DEFINE_EVENT(ext4__truncate, ext4_truncate_enter,
@@ -1417,7 +1390,7 @@
DECLARE_EVENT_CLASS(ext4__map_blocks_enter,
TP_PROTO(struct inode *inode, ext4_lblk_t lblk,
- unsigned len, unsigned flags),
+ unsigned int len, unsigned int flags),
TP_ARGS(inode, lblk, len, flags),
@@ -1425,8 +1398,8 @@
__field( ino_t, ino )
__field( dev_t, dev )
__field( ext4_lblk_t, lblk )
- __field( unsigned, len )
- __field( unsigned, flags )
+ __field( unsigned int, len )
+ __field( unsigned int, flags )
),
TP_fast_assign(
@@ -1440,7 +1413,7 @@
TP_printk("dev %d,%d ino %lu lblk %u len %u flags %u",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- (unsigned) __entry->lblk, __entry->len, __entry->flags)
+ __entry->lblk, __entry->len, __entry->flags)
);
DEFINE_EVENT(ext4__map_blocks_enter, ext4_ext_map_blocks_enter,
@@ -1459,7 +1432,7 @@
DECLARE_EVENT_CLASS(ext4__map_blocks_exit,
TP_PROTO(struct inode *inode, ext4_lblk_t lblk,
- ext4_fsblk_t pblk, unsigned len, int ret),
+ ext4_fsblk_t pblk, unsigned int len, int ret),
TP_ARGS(inode, lblk, pblk, len, ret),
@@ -1468,7 +1441,7 @@
__field( dev_t, dev )
__field( ext4_lblk_t, lblk )
__field( ext4_fsblk_t, pblk )
- __field( unsigned, len )
+ __field( unsigned int, len )
__field( int, ret )
),
@@ -1484,7 +1457,7 @@
TP_printk("dev %d,%d ino %lu lblk %u pblk %llu len %u ret %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- (unsigned) __entry->lblk, (unsigned long long) __entry->pblk,
+ __entry->lblk, __entry->pblk,
__entry->len, __entry->ret)
);
@@ -1524,7 +1497,7 @@
TP_printk("dev %d,%d ino %lu lblk %u pblk %llu",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
- (unsigned) __entry->lblk, (unsigned long long) __entry->pblk)
+ __entry->lblk, __entry->pblk)
);
TRACE_EVENT(ext4_load_inode,
diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h
index ae045ca..1c09820 100644
--- a/include/trace/events/irq.h
+++ b/include/trace/events/irq.h
@@ -20,7 +20,8 @@
softirq_name(BLOCK_IOPOLL), \
softirq_name(TASKLET), \
softirq_name(SCHED), \
- softirq_name(HRTIMER))
+ softirq_name(HRTIMER), \
+ softirq_name(RCU))
/**
* irq_handler_entry - called immediately before the irq action handler
diff --git a/include/trace/events/vmscan.h b/include/trace/events/vmscan.h
index ea422aa..b2c33bd 100644
--- a/include/trace/events/vmscan.h
+++ b/include/trace/events/vmscan.h
@@ -6,6 +6,8 @@
#include <linux/types.h>
#include <linux/tracepoint.h>
+#include <linux/mm.h>
+#include <linux/memcontrol.h>
#include "gfpflags.h"
#define RECLAIM_WB_ANON 0x0001u
@@ -310,6 +312,87 @@
show_reclaim_flags(__entry->reclaim_flags))
);
+TRACE_EVENT(replace_swap_token,
+ TP_PROTO(struct mm_struct *old_mm,
+ struct mm_struct *new_mm),
+
+ TP_ARGS(old_mm, new_mm),
+
+ TP_STRUCT__entry(
+ __field(struct mm_struct*, old_mm)
+ __field(unsigned int, old_prio)
+ __field(struct mm_struct*, new_mm)
+ __field(unsigned int, new_prio)
+ ),
+
+ TP_fast_assign(
+ __entry->old_mm = old_mm;
+ __entry->old_prio = old_mm ? old_mm->token_priority : 0;
+ __entry->new_mm = new_mm;
+ __entry->new_prio = new_mm->token_priority;
+ ),
+
+ TP_printk("old_token_mm=%p old_prio=%u new_token_mm=%p new_prio=%u",
+ __entry->old_mm, __entry->old_prio,
+ __entry->new_mm, __entry->new_prio)
+);
+
+DECLARE_EVENT_CLASS(put_swap_token_template,
+ TP_PROTO(struct mm_struct *swap_token_mm),
+
+ TP_ARGS(swap_token_mm),
+
+ TP_STRUCT__entry(
+ __field(struct mm_struct*, swap_token_mm)
+ ),
+
+ TP_fast_assign(
+ __entry->swap_token_mm = swap_token_mm;
+ ),
+
+ TP_printk("token_mm=%p", __entry->swap_token_mm)
+);
+
+DEFINE_EVENT(put_swap_token_template, put_swap_token,
+ TP_PROTO(struct mm_struct *swap_token_mm),
+ TP_ARGS(swap_token_mm)
+);
+
+DEFINE_EVENT_CONDITION(put_swap_token_template, disable_swap_token,
+ TP_PROTO(struct mm_struct *swap_token_mm),
+ TP_ARGS(swap_token_mm),
+ TP_CONDITION(swap_token_mm != NULL)
+);
+
+TRACE_EVENT_CONDITION(update_swap_token_priority,
+ TP_PROTO(struct mm_struct *mm,
+ unsigned int old_prio,
+ struct mm_struct *swap_token_mm),
+
+ TP_ARGS(mm, old_prio, swap_token_mm),
+
+ TP_CONDITION(mm->token_priority != old_prio),
+
+ TP_STRUCT__entry(
+ __field(struct mm_struct*, mm)
+ __field(unsigned int, old_prio)
+ __field(unsigned int, new_prio)
+ __field(struct mm_struct*, swap_token_mm)
+ __field(unsigned int, swap_token_prio)
+ ),
+
+ TP_fast_assign(
+ __entry->mm = mm;
+ __entry->old_prio = old_prio;
+ __entry->new_prio = mm->token_priority;
+ __entry->swap_token_mm = swap_token_mm;
+ __entry->swap_token_prio = swap_token_mm ? swap_token_mm->token_priority : 0;
+ ),
+
+ TP_printk("mm=%p old_prio=%u new_prio=%u swap_token_mm=%p token_prio=%u",
+ __entry->mm, __entry->old_prio, __entry->new_prio,
+ __entry->swap_token_mm, __entry->swap_token_prio)
+);
#endif /* _TRACE_VMSCAN_H */
diff --git a/init/Kconfig b/init/Kconfig
index ebafac4..412c21b 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -19,7 +19,6 @@
config CONSTRUCTORS
bool
depends on !UML
- default y
config HAVE_IRQ_WORK
bool
@@ -204,6 +203,15 @@
endchoice
+config DEFAULT_HOSTNAME
+ string "Default hostname"
+ default "(none)"
+ help
+ This option determines the default system hostname before userspace
+ calls sethostname(2). The kernel traditionally uses "(none)" here,
+ but you may wish to use a different default here to make a minimal
+ system more usable with less configuration.
+
config SWAP
bool "Support for paging of anonymous memory (swap)"
depends on MMU && BLOCK
diff --git a/init/calibrate.c b/init/calibrate.c
index cfd7000..aae2f40 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -93,9 +93,6 @@
* If the upper limit and lower limit of the timer_rate is
* >= 12.5% apart, redo calibration.
*/
- printk(KERN_DEBUG "calibrate_delay_direct() timer_rate_max=%lu "
- "timer_rate_min=%lu pre_start=%lu pre_end=%lu\n",
- timer_rate_max, timer_rate_min, pre_start, pre_end);
if (start >= post_end)
printk(KERN_NOTICE "calibrate_delay_direct() ignoring "
"timer_rate as we had a TSC wrap around"
@@ -248,30 +245,32 @@
void __cpuinit calibrate_delay(void)
{
+ unsigned long lpj;
static bool printed;
if (preset_lpj) {
- loops_per_jiffy = preset_lpj;
+ lpj = preset_lpj;
if (!printed)
pr_info("Calibrating delay loop (skipped) "
"preset value.. ");
} else if ((!printed) && lpj_fine) {
- loops_per_jiffy = lpj_fine;
+ lpj = lpj_fine;
pr_info("Calibrating delay loop (skipped), "
"value calculated using timer frequency.. ");
- } else if ((loops_per_jiffy = calibrate_delay_direct()) != 0) {
+ } else if ((lpj = calibrate_delay_direct()) != 0) {
if (!printed)
pr_info("Calibrating delay using timer "
"specific routine.. ");
} else {
if (!printed)
pr_info("Calibrating delay loop... ");
- loops_per_jiffy = calibrate_delay_converge();
+ lpj = calibrate_delay_converge();
}
if (!printed)
pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
- loops_per_jiffy/(500000/HZ),
- (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
+ lpj/(500000/HZ),
+ (lpj/(5000/HZ)) % 100, lpj);
+ loops_per_jiffy = lpj;
printed = true;
}
diff --git a/init/main.c b/init/main.c
index cafba67..d7211fa 100644
--- a/init/main.c
+++ b/init/main.c
@@ -542,6 +542,7 @@
timekeeping_init();
time_init();
profile_init();
+ call_function_init();
if (!irqs_disabled())
printk(KERN_CRIT "start_kernel(): bug: interrupts were "
"enabled early\n");
diff --git a/kernel/events/core.c b/kernel/events/core.c
index d863b3c..9efe710 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -7402,26 +7402,12 @@
return 0;
}
-static void perf_cgroup_move(struct task_struct *task)
+static void
+perf_cgroup_attach_task(struct cgroup *cgrp, struct task_struct *task)
{
task_function_call(task, __perf_cgroup_move, task);
}
-static void perf_cgroup_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
- struct cgroup *old_cgrp, struct task_struct *task,
- bool threadgroup)
-{
- perf_cgroup_move(task);
- if (threadgroup) {
- struct task_struct *c;
- rcu_read_lock();
- list_for_each_entry_rcu(c, &task->thread_group, thread_group) {
- perf_cgroup_move(c);
- }
- rcu_read_unlock();
- }
-}
-
static void perf_cgroup_exit(struct cgroup_subsys *ss, struct cgroup *cgrp,
struct cgroup *old_cgrp, struct task_struct *task)
{
@@ -7433,7 +7419,7 @@
if (!(task->flags & PF_EXITING))
return;
- perf_cgroup_move(task);
+ perf_cgroup_attach_task(cgrp, task);
}
struct cgroup_subsys perf_subsys = {
@@ -7442,6 +7428,6 @@
.create = perf_cgroup_create,
.destroy = perf_cgroup_destroy,
.exit = perf_cgroup_exit,
- .attach = perf_cgroup_attach,
+ .attach_task = perf_cgroup_attach_task,
};
#endif /* CONFIG_CGROUP_PERF */
diff --git a/kernel/exit.c b/kernel/exit.c
index 20a4064..f2b321b 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -561,29 +561,28 @@
#ifdef CONFIG_MM_OWNER
/*
- * Task p is exiting and it owned mm, lets find a new owner for it
+ * A task is exiting. If it owned this mm, find a new owner for the mm.
*/
-static inline int
-mm_need_new_owner(struct mm_struct *mm, struct task_struct *p)
-{
- /*
- * If there are other users of the mm and the owner (us) is exiting
- * we need to find a new owner to take on the responsibility.
- */
- if (atomic_read(&mm->mm_users) <= 1)
- return 0;
- if (mm->owner != p)
- return 0;
- return 1;
-}
-
void mm_update_next_owner(struct mm_struct *mm)
{
struct task_struct *c, *g, *p = current;
retry:
- if (!mm_need_new_owner(mm, p))
+ /*
+ * If the exiting or execing task is not the owner, it's
+ * someone else's problem.
+ */
+ if (mm->owner != p)
return;
+ /*
+ * The current owner is exiting/execing and there are no other
+ * candidates. Do not leave the mm pointing to a possibly
+ * freed task structure.
+ */
+ if (atomic_read(&mm->mm_users) <= 1) {
+ mm->owner = NULL;
+ return;
+ }
read_lock(&tasklist_lock);
/*
diff --git a/kernel/gcov/Kconfig b/kernel/gcov/Kconfig
index b8cadf7..5bf924d 100644
--- a/kernel/gcov/Kconfig
+++ b/kernel/gcov/Kconfig
@@ -2,7 +2,8 @@
config GCOV_KERNEL
bool "Enable gcov-based kernel profiling"
- depends on DEBUG_FS && CONSTRUCTORS
+ depends on DEBUG_FS
+ select CONSTRUCTORS
default n
---help---
This option enables gcov-based code profiling (e.g. for code coverage
diff --git a/kernel/irq/generic-chip.c b/kernel/irq/generic-chip.c
index 31a9db7..3a2cab4 100644
--- a/kernel/irq/generic-chip.c
+++ b/kernel/irq/generic-chip.c
@@ -101,10 +101,10 @@
}
/**
- * irq_gc_ack - Ack pending interrupt
+ * irq_gc_ack_set_bit - Ack pending interrupt via setting bit
* @d: irq_data
*/
-void irq_gc_ack(struct irq_data *d)
+void irq_gc_ack_set_bit(struct irq_data *d)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
u32 mask = 1 << (d->irq - gc->irq_base);
@@ -115,6 +115,20 @@
}
/**
+ * irq_gc_ack_clr_bit - Ack pending interrupt via clearing bit
+ * @d: irq_data
+ */
+void irq_gc_ack_clr_bit(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ u32 mask = ~(1 << (d->irq - gc->irq_base));
+
+ irq_gc_lock(gc);
+ irq_reg_writel(mask, gc->reg_base + cur_regs(d)->ack);
+ irq_gc_unlock(gc);
+}
+
+/**
* irq_gc_mask_disable_reg_and_ack- Mask and ack pending interrupt
* @d: irq_data
*/
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index 90cb55f..470d08c 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -133,12 +133,6 @@
switch (res) {
case IRQ_WAKE_THREAD:
/*
- * Set result to handled so the spurious check
- * does not trigger.
- */
- res = IRQ_HANDLED;
-
- /*
* Catch drivers which return WAKE_THREAD but
* did not set up a thread function
*/
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 886e803..4c60a50 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -257,13 +257,11 @@
count = ARRAY_SIZE(irq_desc);
for (i = 0; i < count; i++) {
- desc[i].irq_data.irq = i;
- desc[i].irq_data.chip = &no_irq_chip;
desc[i].kstat_irqs = alloc_percpu(unsigned int);
- irq_settings_clr_and_set(desc, ~0, _IRQ_DEFAULT_INIT_FLAGS);
- alloc_masks(desc + i, GFP_KERNEL, node);
- desc_smp_init(desc + i, node);
+ alloc_masks(&desc[i], GFP_KERNEL, node);
+ raw_spin_lock_init(&desc[i].lock);
lockdep_set_class(&desc[i].lock, &irq_desc_lock_class);
+ desc_set_defaults(i, &desc[i], node);
}
return arch_early_irq_init();
}
@@ -346,6 +344,12 @@
if (!cnt)
return -EINVAL;
+ if (irq >= 0) {
+ if (from > irq)
+ return -EINVAL;
+ from = irq;
+ }
+
mutex_lock(&sparse_irq_lock);
start = bitmap_find_next_zero_area(allocated_irqs, IRQ_BITMAP_BITS,
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index f7ce002..0a7840ae 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -491,6 +491,9 @@
struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
int ret = 0;
+ if (!desc)
+ return -EINVAL;
+
/* wakeup-capable irqs can be shared between drivers that
* don't need to have the same sleep mode behaviors.
*/
@@ -723,13 +726,16 @@
* context. So we need to disable bh here to avoid deadlocks and other
* side effects.
*/
-static void
+static irqreturn_t
irq_forced_thread_fn(struct irq_desc *desc, struct irqaction *action)
{
+ irqreturn_t ret;
+
local_bh_disable();
- action->thread_fn(action->irq, action->dev_id);
+ ret = action->thread_fn(action->irq, action->dev_id);
irq_finalize_oneshot(desc, action, false);
local_bh_enable();
+ return ret;
}
/*
@@ -737,10 +743,14 @@
* preemtible - many of them need to sleep and wait for slow busses to
* complete.
*/
-static void irq_thread_fn(struct irq_desc *desc, struct irqaction *action)
+static irqreturn_t irq_thread_fn(struct irq_desc *desc,
+ struct irqaction *action)
{
- action->thread_fn(action->irq, action->dev_id);
+ irqreturn_t ret;
+
+ ret = action->thread_fn(action->irq, action->dev_id);
irq_finalize_oneshot(desc, action, false);
+ return ret;
}
/*
@@ -753,7 +763,8 @@
};
struct irqaction *action = data;
struct irq_desc *desc = irq_to_desc(action->irq);
- void (*handler_fn)(struct irq_desc *desc, struct irqaction *action);
+ irqreturn_t (*handler_fn)(struct irq_desc *desc,
+ struct irqaction *action);
int wake;
if (force_irqthreads & test_bit(IRQTF_FORCED_THREAD,
@@ -783,8 +794,12 @@
desc->istate |= IRQS_PENDING;
raw_spin_unlock_irq(&desc->lock);
} else {
+ irqreturn_t action_ret;
+
raw_spin_unlock_irq(&desc->lock);
- handler_fn(desc, action);
+ action_ret = handler_fn(desc, action);
+ if (!noirqdebug)
+ note_interrupt(action->irq, desc, action_ret);
}
wake = atomic_dec_and_test(&desc->threads_active);
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index dfbd550..aa57d5d 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -167,6 +167,13 @@
jiffies + POLL_SPURIOUS_IRQ_INTERVAL);
}
+static inline int bad_action_ret(irqreturn_t action_ret)
+{
+ if (likely(action_ret <= (IRQ_HANDLED | IRQ_WAKE_THREAD)))
+ return 0;
+ return 1;
+}
+
/*
* If 99,900 of the previous 100,000 interrupts have not been handled
* then assume that the IRQ is stuck in some manner. Drop a diagnostic
@@ -182,7 +189,7 @@
struct irqaction *action;
unsigned long flags;
- if (action_ret != IRQ_HANDLED && action_ret != IRQ_NONE) {
+ if (bad_action_ret(action_ret)) {
printk(KERN_ERR "irq event %d: bogus return value %x\n",
irq, action_ret);
} else {
@@ -201,10 +208,11 @@
raw_spin_lock_irqsave(&desc->lock, flags);
action = desc->action;
while (action) {
- printk(KERN_ERR "[<%p>]", action->handler);
- print_symbol(" (%s)",
- (unsigned long)action->handler);
- printk("\n");
+ printk(KERN_ERR "[<%p>] %pf", action->handler, action->handler);
+ if (action->thread_fn)
+ printk(KERN_CONT " threaded [<%p>] %pf",
+ action->thread_fn, action->thread_fn);
+ printk(KERN_CONT "\n");
action = action->next;
}
raw_spin_unlock_irqrestore(&desc->lock, flags);
@@ -262,7 +270,16 @@
if (desc->istate & IRQS_POLL_INPROGRESS)
return;
- if (unlikely(action_ret != IRQ_HANDLED)) {
+ /* we get here again via the threaded handler */
+ if (action_ret == IRQ_WAKE_THREAD)
+ return;
+
+ if (bad_action_ret(action_ret)) {
+ report_bad_irq(irq, desc, action_ret);
+ return;
+ }
+
+ if (unlikely(action_ret == IRQ_NONE)) {
/*
* If we are seeing only the odd spurious IRQ caused by
* bus asynchronicity then don't eventually trigger an error,
@@ -274,8 +291,6 @@
else
desc->irqs_unhandled++;
desc->last_unhandled = jiffies;
- if (unlikely(action_ret != IRQ_NONE))
- report_bad_irq(irq, desc, action_ret);
}
if (unlikely(try_misrouted_irq(irq, desc, action_ret))) {
diff --git a/kernel/jump_label.c b/kernel/jump_label.c
index fa27e75..a8ce450 100644
--- a/kernel/jump_label.c
+++ b/kernel/jump_label.c
@@ -375,15 +375,19 @@
static void jump_label_update(struct jump_label_key *key, int enable)
{
- struct jump_entry *entry = key->entries;
-
- /* if there are no users, entry can be NULL */
- if (entry)
- __jump_label_update(key, entry, __stop___jump_table, enable);
+ struct jump_entry *entry = key->entries, *stop = __stop___jump_table;
#ifdef CONFIG_MODULES
+ struct module *mod = __module_address((jump_label_t)key);
+
__jump_label_mod_update(key, enable);
+
+ if (mod)
+ stop = mod->jump_entries + mod->num_jump_entries;
#endif
+ /* if there are no users, entry can be NULL */
+ if (entry)
+ __jump_label_update(key, entry, stop, enable);
}
#endif
diff --git a/kernel/kmod.c b/kernel/kmod.c
index ad6a81c..47613df 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -156,12 +156,6 @@
*/
set_user_nice(current, 0);
- if (sub_info->init) {
- retval = sub_info->init(sub_info);
- if (retval)
- goto fail;
- }
-
retval = -ENOMEM;
new = prepare_kernel_cred(current);
if (!new)
@@ -173,6 +167,14 @@
new->cap_inheritable);
spin_unlock(&umh_sysctl_lock);
+ if (sub_info->init) {
+ retval = sub_info->init(sub_info, new);
+ if (retval) {
+ abort_creds(new);
+ goto fail;
+ }
+ }
+
commit_creds(new);
retval = kernel_execve(sub_info->path,
@@ -388,7 +390,7 @@
* context in which call_usermodehelper_exec is called.
*/
void call_usermodehelper_setfns(struct subprocess_info *info,
- int (*init)(struct subprocess_info *info),
+ int (*init)(struct subprocess_info *info, struct cred *new),
void (*cleanup)(struct subprocess_info *info),
void *data)
{
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 63437d0..298c927 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -3426,7 +3426,7 @@
int ret = 0;
if (unlikely(current->lockdep_recursion))
- return ret;
+ return 1; /* avoid false negative lockdep_assert_held() */
raw_local_irq_save(flags);
check_flags(flags);
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index ace5588..06efa54 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -1211,7 +1211,11 @@
to_free_highmem = alloc_highmem - save;
} else {
to_free_highmem = 0;
- to_free_normal -= save - alloc_highmem;
+ save -= alloc_highmem;
+ if (to_free_normal > save)
+ to_free_normal -= save;
+ else
+ to_free_normal = 0;
}
memory_bm_position_reset(©_bm);
diff --git a/kernel/power/user.c b/kernel/power/user.c
index 7d02d33..42ddbc6 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -113,8 +113,10 @@
if (error)
pm_notifier_call_chain(PM_POST_RESTORE);
}
- if (error)
+ if (error) {
+ free_basic_memory_bitmaps();
atomic_inc(&snapshot_device_available);
+ }
data->frozen = 0;
data->ready = 0;
data->platform_support = 0;
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 89419ff..ba06207 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -84,10 +84,35 @@
static struct rcu_state *rcu_state;
+/*
+ * The rcu_scheduler_active variable transitions from zero to one just
+ * before the first task is spawned. So when this variable is zero, RCU
+ * can assume that there is but one task, allowing RCU to (for example)
+ * optimized synchronize_sched() to a simple barrier(). When this variable
+ * is one, RCU must actually do all the hard work required to detect real
+ * grace periods. This variable is also used to suppress boot-time false
+ * positives from lockdep-RCU error checking.
+ */
int rcu_scheduler_active __read_mostly;
EXPORT_SYMBOL_GPL(rcu_scheduler_active);
/*
+ * The rcu_scheduler_fully_active variable transitions from zero to one
+ * during the early_initcall() processing, which is after the scheduler
+ * is capable of creating new tasks. So RCU processing (for example,
+ * creating tasks for RCU priority boosting) must be delayed until after
+ * rcu_scheduler_fully_active transitions from zero to one. We also
+ * currently delay invocation of any RCU callbacks until after this point.
+ *
+ * It might later prove better for people registering RCU callbacks during
+ * early boot to take responsibility for these callbacks, but one step at
+ * a time.
+ */
+static int rcu_scheduler_fully_active __read_mostly;
+
+#ifdef CONFIG_RCU_BOOST
+
+/*
* Control variables for per-CPU and per-rcu_node kthreads. These
* handle all flavors of RCU.
*/
@@ -96,10 +121,12 @@
DEFINE_PER_CPU(int, rcu_cpu_kthread_cpu);
DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
DEFINE_PER_CPU(char, rcu_cpu_has_work);
-static char rcu_kthreads_spawnable;
+
+#endif /* #ifdef CONFIG_RCU_BOOST */
static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu);
-static void invoke_rcu_cpu_kthread(void);
+static void invoke_rcu_core(void);
+static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp);
#define RCU_KTHREAD_PRIO 1 /* RT priority for per-CPU kthreads. */
@@ -1088,14 +1115,8 @@
int need_report = 0;
struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
struct rcu_node *rnp;
- struct task_struct *t;
- /* Stop the CPU's kthread. */
- t = per_cpu(rcu_cpu_kthread_task, cpu);
- if (t != NULL) {
- per_cpu(rcu_cpu_kthread_task, cpu) = NULL;
- kthread_stop(t);
- }
+ rcu_stop_cpu_kthread(cpu);
/* Exclude any attempts to start a new grace period. */
raw_spin_lock_irqsave(&rsp->onofflock, flags);
@@ -1231,7 +1252,7 @@
/* Re-raise the RCU softirq if there are callbacks remaining. */
if (cpu_has_callbacks_ready_to_invoke(rdp))
- invoke_rcu_cpu_kthread();
+ invoke_rcu_core();
}
/*
@@ -1277,7 +1298,7 @@
}
rcu_preempt_check_callbacks(cpu);
if (rcu_pending(cpu))
- invoke_rcu_cpu_kthread();
+ invoke_rcu_core();
}
#ifdef CONFIG_SMP
@@ -1442,13 +1463,14 @@
}
/* If there are callbacks ready, invoke them. */
- rcu_do_batch(rsp, rdp);
+ if (cpu_has_callbacks_ready_to_invoke(rdp))
+ invoke_rcu_callbacks(rsp, rdp);
}
/*
* Do softirq processing for the current CPU.
*/
-static void rcu_process_callbacks(void)
+static void rcu_process_callbacks(struct softirq_action *unused)
{
__rcu_process_callbacks(&rcu_sched_state,
&__get_cpu_var(rcu_sched_data));
@@ -1465,342 +1487,22 @@
* the current CPU with interrupts disabled, the rcu_cpu_kthread_task
* cannot disappear out from under us.
*/
-static void invoke_rcu_cpu_kthread(void)
+static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp)
{
- unsigned long flags;
-
- local_irq_save(flags);
- __this_cpu_write(rcu_cpu_has_work, 1);
- if (__this_cpu_read(rcu_cpu_kthread_task) == NULL) {
- local_irq_restore(flags);
+ if (unlikely(!ACCESS_ONCE(rcu_scheduler_fully_active)))
+ return;
+ if (likely(!rsp->boost)) {
+ rcu_do_batch(rsp, rdp);
return;
}
- wake_up_process(__this_cpu_read(rcu_cpu_kthread_task));
- local_irq_restore(flags);
+ invoke_rcu_callbacks_kthread();
}
-/*
- * Wake up the specified per-rcu_node-structure kthread.
- * Because the per-rcu_node kthreads are immortal, we don't need
- * to do anything to keep them alive.
- */
-static void invoke_rcu_node_kthread(struct rcu_node *rnp)
+static void invoke_rcu_core(void)
{
- struct task_struct *t;
-
- t = rnp->node_kthread_task;
- if (t != NULL)
- wake_up_process(t);
+ raise_softirq(RCU_SOFTIRQ);
}
-/*
- * Set the specified CPU's kthread to run RT or not, as specified by
- * the to_rt argument. The CPU-hotplug locks are held, so the task
- * is not going away.
- */
-static void rcu_cpu_kthread_setrt(int cpu, int to_rt)
-{
- int policy;
- struct sched_param sp;
- struct task_struct *t;
-
- t = per_cpu(rcu_cpu_kthread_task, cpu);
- if (t == NULL)
- return;
- if (to_rt) {
- policy = SCHED_FIFO;
- sp.sched_priority = RCU_KTHREAD_PRIO;
- } else {
- policy = SCHED_NORMAL;
- sp.sched_priority = 0;
- }
- sched_setscheduler_nocheck(t, policy, &sp);
-}
-
-/*
- * Timer handler to initiate the waking up of per-CPU kthreads that
- * have yielded the CPU due to excess numbers of RCU callbacks.
- * We wake up the per-rcu_node kthread, which in turn will wake up
- * the booster kthread.
- */
-static void rcu_cpu_kthread_timer(unsigned long arg)
-{
- struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, arg);
- struct rcu_node *rnp = rdp->mynode;
-
- atomic_or(rdp->grpmask, &rnp->wakemask);
- invoke_rcu_node_kthread(rnp);
-}
-
-/*
- * Drop to non-real-time priority and yield, but only after posting a
- * timer that will cause us to regain our real-time priority if we
- * remain preempted. Either way, we restore our real-time priority
- * before returning.
- */
-static void rcu_yield(void (*f)(unsigned long), unsigned long arg)
-{
- struct sched_param sp;
- struct timer_list yield_timer;
-
- setup_timer_on_stack(&yield_timer, f, arg);
- mod_timer(&yield_timer, jiffies + 2);
- sp.sched_priority = 0;
- sched_setscheduler_nocheck(current, SCHED_NORMAL, &sp);
- set_user_nice(current, 19);
- schedule();
- sp.sched_priority = RCU_KTHREAD_PRIO;
- sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
- del_timer(&yield_timer);
-}
-
-/*
- * Handle cases where the rcu_cpu_kthread() ends up on the wrong CPU.
- * This can happen while the corresponding CPU is either coming online
- * or going offline. We cannot wait until the CPU is fully online
- * before starting the kthread, because the various notifier functions
- * can wait for RCU grace periods. So we park rcu_cpu_kthread() until
- * the corresponding CPU is online.
- *
- * Return 1 if the kthread needs to stop, 0 otherwise.
- *
- * Caller must disable bh. This function can momentarily enable it.
- */
-static int rcu_cpu_kthread_should_stop(int cpu)
-{
- while (cpu_is_offline(cpu) ||
- !cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)) ||
- smp_processor_id() != cpu) {
- if (kthread_should_stop())
- return 1;
- per_cpu(rcu_cpu_kthread_status, cpu) = RCU_KTHREAD_OFFCPU;
- per_cpu(rcu_cpu_kthread_cpu, cpu) = raw_smp_processor_id();
- local_bh_enable();
- schedule_timeout_uninterruptible(1);
- if (!cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)))
- set_cpus_allowed_ptr(current, cpumask_of(cpu));
- local_bh_disable();
- }
- per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
- return 0;
-}
-
-/*
- * Per-CPU kernel thread that invokes RCU callbacks. This replaces the
- * earlier RCU softirq.
- */
-static int rcu_cpu_kthread(void *arg)
-{
- int cpu = (int)(long)arg;
- unsigned long flags;
- int spincnt = 0;
- unsigned int *statusp = &per_cpu(rcu_cpu_kthread_status, cpu);
- char work;
- char *workp = &per_cpu(rcu_cpu_has_work, cpu);
-
- for (;;) {
- *statusp = RCU_KTHREAD_WAITING;
- rcu_wait(*workp != 0 || kthread_should_stop());
- local_bh_disable();
- if (rcu_cpu_kthread_should_stop(cpu)) {
- local_bh_enable();
- break;
- }
- *statusp = RCU_KTHREAD_RUNNING;
- per_cpu(rcu_cpu_kthread_loops, cpu)++;
- local_irq_save(flags);
- work = *workp;
- *workp = 0;
- local_irq_restore(flags);
- if (work)
- rcu_process_callbacks();
- local_bh_enable();
- if (*workp != 0)
- spincnt++;
- else
- spincnt = 0;
- if (spincnt > 10) {
- *statusp = RCU_KTHREAD_YIELDING;
- rcu_yield(rcu_cpu_kthread_timer, (unsigned long)cpu);
- spincnt = 0;
- }
- }
- *statusp = RCU_KTHREAD_STOPPED;
- return 0;
-}
-
-/*
- * Spawn a per-CPU kthread, setting up affinity and priority.
- * Because the CPU hotplug lock is held, no other CPU will be attempting
- * to manipulate rcu_cpu_kthread_task. There might be another CPU
- * attempting to access it during boot, but the locking in kthread_bind()
- * will enforce sufficient ordering.
- */
-static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
-{
- struct sched_param sp;
- struct task_struct *t;
-
- if (!rcu_kthreads_spawnable ||
- per_cpu(rcu_cpu_kthread_task, cpu) != NULL)
- return 0;
- t = kthread_create(rcu_cpu_kthread, (void *)(long)cpu, "rcuc%d", cpu);
- if (IS_ERR(t))
- return PTR_ERR(t);
- kthread_bind(t, cpu);
- per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
- WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
- per_cpu(rcu_cpu_kthread_task, cpu) = t;
- sp.sched_priority = RCU_KTHREAD_PRIO;
- sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
- return 0;
-}
-
-/*
- * Per-rcu_node kthread, which is in charge of waking up the per-CPU
- * kthreads when needed. We ignore requests to wake up kthreads
- * for offline CPUs, which is OK because force_quiescent_state()
- * takes care of this case.
- */
-static int rcu_node_kthread(void *arg)
-{
- int cpu;
- unsigned long flags;
- unsigned long mask;
- struct rcu_node *rnp = (struct rcu_node *)arg;
- struct sched_param sp;
- struct task_struct *t;
-
- for (;;) {
- rnp->node_kthread_status = RCU_KTHREAD_WAITING;
- rcu_wait(atomic_read(&rnp->wakemask) != 0);
- rnp->node_kthread_status = RCU_KTHREAD_RUNNING;
- raw_spin_lock_irqsave(&rnp->lock, flags);
- mask = atomic_xchg(&rnp->wakemask, 0);
- rcu_initiate_boost(rnp, flags); /* releases rnp->lock. */
- for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1) {
- if ((mask & 0x1) == 0)
- continue;
- preempt_disable();
- t = per_cpu(rcu_cpu_kthread_task, cpu);
- if (!cpu_online(cpu) || t == NULL) {
- preempt_enable();
- continue;
- }
- per_cpu(rcu_cpu_has_work, cpu) = 1;
- sp.sched_priority = RCU_KTHREAD_PRIO;
- sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
- preempt_enable();
- }
- }
- /* NOTREACHED */
- rnp->node_kthread_status = RCU_KTHREAD_STOPPED;
- return 0;
-}
-
-/*
- * Set the per-rcu_node kthread's affinity to cover all CPUs that are
- * served by the rcu_node in question. The CPU hotplug lock is still
- * held, so the value of rnp->qsmaskinit will be stable.
- *
- * We don't include outgoingcpu in the affinity set, use -1 if there is
- * no outgoing CPU. If there are no CPUs left in the affinity set,
- * this function allows the kthread to execute on any CPU.
- */
-static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
-{
- cpumask_var_t cm;
- int cpu;
- unsigned long mask = rnp->qsmaskinit;
-
- if (rnp->node_kthread_task == NULL)
- return;
- if (!alloc_cpumask_var(&cm, GFP_KERNEL))
- return;
- cpumask_clear(cm);
- for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1)
- if ((mask & 0x1) && cpu != outgoingcpu)
- cpumask_set_cpu(cpu, cm);
- if (cpumask_weight(cm) == 0) {
- cpumask_setall(cm);
- for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++)
- cpumask_clear_cpu(cpu, cm);
- WARN_ON_ONCE(cpumask_weight(cm) == 0);
- }
- set_cpus_allowed_ptr(rnp->node_kthread_task, cm);
- rcu_boost_kthread_setaffinity(rnp, cm);
- free_cpumask_var(cm);
-}
-
-/*
- * Spawn a per-rcu_node kthread, setting priority and affinity.
- * Called during boot before online/offline can happen, or, if
- * during runtime, with the main CPU-hotplug locks held. So only
- * one of these can be executing at a time.
- */
-static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
- struct rcu_node *rnp)
-{
- unsigned long flags;
- int rnp_index = rnp - &rsp->node[0];
- struct sched_param sp;
- struct task_struct *t;
-
- if (!rcu_kthreads_spawnable ||
- rnp->qsmaskinit == 0)
- return 0;
- if (rnp->node_kthread_task == NULL) {
- t = kthread_create(rcu_node_kthread, (void *)rnp,
- "rcun%d", rnp_index);
- if (IS_ERR(t))
- return PTR_ERR(t);
- raw_spin_lock_irqsave(&rnp->lock, flags);
- rnp->node_kthread_task = t;
- raw_spin_unlock_irqrestore(&rnp->lock, flags);
- sp.sched_priority = 99;
- sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
- }
- return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index);
-}
-
-static void rcu_wake_one_boost_kthread(struct rcu_node *rnp);
-
-/*
- * Spawn all kthreads -- called as soon as the scheduler is running.
- */
-static int __init rcu_spawn_kthreads(void)
-{
- int cpu;
- struct rcu_node *rnp;
- struct task_struct *t;
-
- rcu_kthreads_spawnable = 1;
- for_each_possible_cpu(cpu) {
- per_cpu(rcu_cpu_has_work, cpu) = 0;
- if (cpu_online(cpu)) {
- (void)rcu_spawn_one_cpu_kthread(cpu);
- t = per_cpu(rcu_cpu_kthread_task, cpu);
- if (t)
- wake_up_process(t);
- }
- }
- rnp = rcu_get_root(rcu_state);
- (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
- if (rnp->node_kthread_task)
- wake_up_process(rnp->node_kthread_task);
- if (NUM_RCU_NODES > 1) {
- rcu_for_each_leaf_node(rcu_state, rnp) {
- (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
- t = rnp->node_kthread_task;
- if (t)
- wake_up_process(t);
- rcu_wake_one_boost_kthread(rnp);
- }
- }
- return 0;
-}
-early_initcall(rcu_spawn_kthreads);
-
static void
__call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
struct rcu_state *rsp)
@@ -2207,44 +1909,6 @@
rcu_preempt_init_percpu_data(cpu);
}
-static void __cpuinit rcu_prepare_kthreads(int cpu)
-{
- struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
- struct rcu_node *rnp = rdp->mynode;
-
- /* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */
- if (rcu_kthreads_spawnable) {
- (void)rcu_spawn_one_cpu_kthread(cpu);
- if (rnp->node_kthread_task == NULL)
- (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
- }
-}
-
-/*
- * kthread_create() creates threads in TASK_UNINTERRUPTIBLE state,
- * but the RCU threads are woken on demand, and if demand is low this
- * could be a while triggering the hung task watchdog.
- *
- * In order to avoid this, poke all tasks once the CPU is fully
- * up and running.
- */
-static void __cpuinit rcu_online_kthreads(int cpu)
-{
- struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
- struct rcu_node *rnp = rdp->mynode;
- struct task_struct *t;
-
- t = per_cpu(rcu_cpu_kthread_task, cpu);
- if (t)
- wake_up_process(t);
-
- t = rnp->node_kthread_task;
- if (t)
- wake_up_process(t);
-
- rcu_wake_one_boost_kthread(rnp);
-}
-
/*
* Handle CPU online/offline notification events.
*/
@@ -2262,7 +1926,6 @@
rcu_prepare_kthreads(cpu);
break;
case CPU_ONLINE:
- rcu_online_kthreads(cpu);
case CPU_DOWN_FAILED:
rcu_node_kthread_setaffinity(rnp, -1);
rcu_cpu_kthread_setrt(cpu, 1);
@@ -2410,6 +2073,7 @@
rcu_init_one(&rcu_sched_state, &rcu_sched_data);
rcu_init_one(&rcu_bh_state, &rcu_bh_data);
__rcu_init_preempt();
+ open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
/*
* We don't need protection against CPU-hotplug here because
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 7b9a08b..01b2ccd 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -369,6 +369,7 @@
/* period because */
/* force_quiescent_state() */
/* was running. */
+ u8 boost; /* Subject to priority boost. */
unsigned long gpnum; /* Current gp number. */
unsigned long completed; /* # of last completed gp. */
@@ -426,6 +427,7 @@
#ifdef CONFIG_HOTPLUG_CPU
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
unsigned long flags);
+static void rcu_stop_cpu_kthread(int cpu);
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
static void rcu_print_detail_task_stall(struct rcu_state *rsp);
static void rcu_print_task_stall(struct rcu_node *rnp);
@@ -450,11 +452,19 @@
static void __init __rcu_init_preempt(void);
static void rcu_needs_cpu_flush(void);
static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags);
+static void rcu_preempt_boost_start_gp(struct rcu_node *rnp);
+static void invoke_rcu_callbacks_kthread(void);
+#ifdef CONFIG_RCU_BOOST
+static void rcu_preempt_do_callbacks(void);
static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp,
cpumask_var_t cm);
-static void rcu_preempt_boost_start_gp(struct rcu_node *rnp);
static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
struct rcu_node *rnp,
int rnp_index);
+static void invoke_rcu_node_kthread(struct rcu_node *rnp);
+static void rcu_yield(void (*f)(unsigned long), unsigned long arg);
+#endif /* #ifdef CONFIG_RCU_BOOST */
+static void rcu_cpu_kthread_setrt(int cpu, int to_rt);
+static void __cpuinit rcu_prepare_kthreads(int cpu);
#endif /* #ifndef RCU_TREE_NONCORE */
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index c8bff30..8aafbb8 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -68,6 +68,7 @@
DEFINE_PER_CPU(struct rcu_data, rcu_preempt_data);
static struct rcu_state *rcu_state = &rcu_preempt_state;
+static void rcu_read_unlock_special(struct task_struct *t);
static int rcu_preempted_readers_exp(struct rcu_node *rnp);
/*
@@ -147,7 +148,7 @@
struct rcu_data *rdp;
struct rcu_node *rnp;
- if (t->rcu_read_lock_nesting &&
+ if (t->rcu_read_lock_nesting > 0 &&
(t->rcu_read_unlock_special & RCU_READ_UNLOCK_BLOCKED) == 0) {
/* Possibly blocking in an RCU read-side critical section. */
@@ -190,6 +191,14 @@
rnp->gp_tasks = &t->rcu_node_entry;
}
raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ } else if (t->rcu_read_lock_nesting < 0 &&
+ t->rcu_read_unlock_special) {
+
+ /*
+ * Complete exit from RCU read-side critical section on
+ * behalf of preempted instance of __rcu_read_unlock().
+ */
+ rcu_read_unlock_special(t);
}
/*
@@ -284,7 +293,7 @@
* notify RCU core processing or task having blocked during the RCU
* read-side critical section.
*/
-static void rcu_read_unlock_special(struct task_struct *t)
+static noinline void rcu_read_unlock_special(struct task_struct *t)
{
int empty;
int empty_exp;
@@ -309,7 +318,7 @@
}
/* Hardware IRQ handlers cannot block. */
- if (in_irq()) {
+ if (in_irq() || in_serving_softirq()) {
local_irq_restore(flags);
return;
}
@@ -342,6 +351,11 @@
#ifdef CONFIG_RCU_BOOST
if (&t->rcu_node_entry == rnp->boost_tasks)
rnp->boost_tasks = np;
+ /* Snapshot and clear ->rcu_boosted with rcu_node lock held. */
+ if (t->rcu_boosted) {
+ special |= RCU_READ_UNLOCK_BOOSTED;
+ t->rcu_boosted = 0;
+ }
#endif /* #ifdef CONFIG_RCU_BOOST */
t->rcu_blocked_node = NULL;
@@ -358,7 +372,6 @@
#ifdef CONFIG_RCU_BOOST
/* Unboost if we were boosted. */
if (special & RCU_READ_UNLOCK_BOOSTED) {
- t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_BOOSTED;
rt_mutex_unlock(t->rcu_boost_mutex);
t->rcu_boost_mutex = NULL;
}
@@ -387,13 +400,22 @@
struct task_struct *t = current;
barrier(); /* needed if we ever invoke rcu_read_unlock in rcutree.c */
- --t->rcu_read_lock_nesting;
- barrier(); /* decrement before load of ->rcu_read_unlock_special */
- if (t->rcu_read_lock_nesting == 0 &&
- unlikely(ACCESS_ONCE(t->rcu_read_unlock_special)))
- rcu_read_unlock_special(t);
+ if (t->rcu_read_lock_nesting != 1)
+ --t->rcu_read_lock_nesting;
+ else {
+ t->rcu_read_lock_nesting = INT_MIN;
+ barrier(); /* assign before ->rcu_read_unlock_special load */
+ if (unlikely(ACCESS_ONCE(t->rcu_read_unlock_special)))
+ rcu_read_unlock_special(t);
+ barrier(); /* ->rcu_read_unlock_special load before assign */
+ t->rcu_read_lock_nesting = 0;
+ }
#ifdef CONFIG_PROVE_LOCKING
- WARN_ON_ONCE(ACCESS_ONCE(t->rcu_read_lock_nesting) < 0);
+ {
+ int rrln = ACCESS_ONCE(t->rcu_read_lock_nesting);
+
+ WARN_ON_ONCE(rrln < 0 && rrln > INT_MIN / 2);
+ }
#endif /* #ifdef CONFIG_PROVE_LOCKING */
}
EXPORT_SYMBOL_GPL(__rcu_read_unlock);
@@ -589,7 +611,8 @@
rcu_preempt_qs(cpu);
return;
}
- if (per_cpu(rcu_preempt_data, cpu).qs_pending)
+ if (t->rcu_read_lock_nesting > 0 &&
+ per_cpu(rcu_preempt_data, cpu).qs_pending)
t->rcu_read_unlock_special |= RCU_READ_UNLOCK_NEED_QS;
}
@@ -602,6 +625,15 @@
&__get_cpu_var(rcu_preempt_data));
}
+#ifdef CONFIG_RCU_BOOST
+
+static void rcu_preempt_do_callbacks(void)
+{
+ rcu_do_batch(&rcu_preempt_state, &__get_cpu_var(rcu_preempt_data));
+}
+
+#endif /* #ifdef CONFIG_RCU_BOOST */
+
/*
* Queue a preemptible-RCU callback for invocation after a grace period.
*/
@@ -686,9 +718,12 @@
raw_spin_lock_irqsave(&rnp->lock, flags);
for (;;) {
- if (!sync_rcu_preempt_exp_done(rnp))
+ if (!sync_rcu_preempt_exp_done(rnp)) {
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
break;
+ }
if (rnp->parent == NULL) {
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
wake_up(&sync_rcu_preempt_exp_wq);
break;
}
@@ -698,7 +733,6 @@
raw_spin_lock(&rnp->lock); /* irqs already disabled */
rnp->expmask &= ~mask;
}
- raw_spin_unlock_irqrestore(&rnp->lock, flags);
}
/*
@@ -1165,7 +1199,7 @@
t = container_of(tb, struct task_struct, rcu_node_entry);
rt_mutex_init_proxy_locked(&mtx, t);
t->rcu_boost_mutex = &mtx;
- t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BOOSTED;
+ t->rcu_boosted = 1;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
rt_mutex_lock(&mtx); /* Side effect: boosts task t's priority. */
rt_mutex_unlock(&mtx); /* Keep lockdep happy. */
@@ -1249,6 +1283,23 @@
}
/*
+ * Wake up the per-CPU kthread to invoke RCU callbacks.
+ */
+static void invoke_rcu_callbacks_kthread(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __this_cpu_write(rcu_cpu_has_work, 1);
+ if (__this_cpu_read(rcu_cpu_kthread_task) == NULL) {
+ local_irq_restore(flags);
+ return;
+ }
+ wake_up_process(__this_cpu_read(rcu_cpu_kthread_task));
+ local_irq_restore(flags);
+}
+
+/*
* Set the affinity of the boost kthread. The CPU-hotplug locks are
* held, so no one should be messing with the existence of the boost
* kthread.
@@ -1288,6 +1339,7 @@
if (&rcu_preempt_state != rsp)
return 0;
+ rsp->boost = 1;
if (rnp->boost_kthread_task != NULL)
return 0;
t = kthread_create(rcu_boost_kthread, (void *)rnp,
@@ -1299,13 +1351,372 @@
raw_spin_unlock_irqrestore(&rnp->lock, flags);
sp.sched_priority = RCU_KTHREAD_PRIO;
sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+ wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */
return 0;
}
-static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
+#ifdef CONFIG_HOTPLUG_CPU
+
+/*
+ * Stop the RCU's per-CPU kthread when its CPU goes offline,.
+ */
+static void rcu_stop_cpu_kthread(int cpu)
{
- if (rnp->boost_kthread_task)
- wake_up_process(rnp->boost_kthread_task);
+ struct task_struct *t;
+
+ /* Stop the CPU's kthread. */
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (t != NULL) {
+ per_cpu(rcu_cpu_kthread_task, cpu) = NULL;
+ kthread_stop(t);
+ }
+}
+
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+
+static void rcu_kthread_do_work(void)
+{
+ rcu_do_batch(&rcu_sched_state, &__get_cpu_var(rcu_sched_data));
+ rcu_do_batch(&rcu_bh_state, &__get_cpu_var(rcu_bh_data));
+ rcu_preempt_do_callbacks();
+}
+
+/*
+ * Wake up the specified per-rcu_node-structure kthread.
+ * Because the per-rcu_node kthreads are immortal, we don't need
+ * to do anything to keep them alive.
+ */
+static void invoke_rcu_node_kthread(struct rcu_node *rnp)
+{
+ struct task_struct *t;
+
+ t = rnp->node_kthread_task;
+ if (t != NULL)
+ wake_up_process(t);
+}
+
+/*
+ * Set the specified CPU's kthread to run RT or not, as specified by
+ * the to_rt argument. The CPU-hotplug locks are held, so the task
+ * is not going away.
+ */
+static void rcu_cpu_kthread_setrt(int cpu, int to_rt)
+{
+ int policy;
+ struct sched_param sp;
+ struct task_struct *t;
+
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (t == NULL)
+ return;
+ if (to_rt) {
+ policy = SCHED_FIFO;
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ } else {
+ policy = SCHED_NORMAL;
+ sp.sched_priority = 0;
+ }
+ sched_setscheduler_nocheck(t, policy, &sp);
+}
+
+/*
+ * Timer handler to initiate the waking up of per-CPU kthreads that
+ * have yielded the CPU due to excess numbers of RCU callbacks.
+ * We wake up the per-rcu_node kthread, which in turn will wake up
+ * the booster kthread.
+ */
+static void rcu_cpu_kthread_timer(unsigned long arg)
+{
+ struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, arg);
+ struct rcu_node *rnp = rdp->mynode;
+
+ atomic_or(rdp->grpmask, &rnp->wakemask);
+ invoke_rcu_node_kthread(rnp);
+}
+
+/*
+ * Drop to non-real-time priority and yield, but only after posting a
+ * timer that will cause us to regain our real-time priority if we
+ * remain preempted. Either way, we restore our real-time priority
+ * before returning.
+ */
+static void rcu_yield(void (*f)(unsigned long), unsigned long arg)
+{
+ struct sched_param sp;
+ struct timer_list yield_timer;
+
+ setup_timer_on_stack(&yield_timer, f, arg);
+ mod_timer(&yield_timer, jiffies + 2);
+ sp.sched_priority = 0;
+ sched_setscheduler_nocheck(current, SCHED_NORMAL, &sp);
+ set_user_nice(current, 19);
+ schedule();
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
+ del_timer(&yield_timer);
+}
+
+/*
+ * Handle cases where the rcu_cpu_kthread() ends up on the wrong CPU.
+ * This can happen while the corresponding CPU is either coming online
+ * or going offline. We cannot wait until the CPU is fully online
+ * before starting the kthread, because the various notifier functions
+ * can wait for RCU grace periods. So we park rcu_cpu_kthread() until
+ * the corresponding CPU is online.
+ *
+ * Return 1 if the kthread needs to stop, 0 otherwise.
+ *
+ * Caller must disable bh. This function can momentarily enable it.
+ */
+static int rcu_cpu_kthread_should_stop(int cpu)
+{
+ while (cpu_is_offline(cpu) ||
+ !cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)) ||
+ smp_processor_id() != cpu) {
+ if (kthread_should_stop())
+ return 1;
+ per_cpu(rcu_cpu_kthread_status, cpu) = RCU_KTHREAD_OFFCPU;
+ per_cpu(rcu_cpu_kthread_cpu, cpu) = raw_smp_processor_id();
+ local_bh_enable();
+ schedule_timeout_uninterruptible(1);
+ if (!cpumask_equal(¤t->cpus_allowed, cpumask_of(cpu)))
+ set_cpus_allowed_ptr(current, cpumask_of(cpu));
+ local_bh_disable();
+ }
+ per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
+ return 0;
+}
+
+/*
+ * Per-CPU kernel thread that invokes RCU callbacks. This replaces the
+ * earlier RCU softirq.
+ */
+static int rcu_cpu_kthread(void *arg)
+{
+ int cpu = (int)(long)arg;
+ unsigned long flags;
+ int spincnt = 0;
+ unsigned int *statusp = &per_cpu(rcu_cpu_kthread_status, cpu);
+ char work;
+ char *workp = &per_cpu(rcu_cpu_has_work, cpu);
+
+ for (;;) {
+ *statusp = RCU_KTHREAD_WAITING;
+ rcu_wait(*workp != 0 || kthread_should_stop());
+ local_bh_disable();
+ if (rcu_cpu_kthread_should_stop(cpu)) {
+ local_bh_enable();
+ break;
+ }
+ *statusp = RCU_KTHREAD_RUNNING;
+ per_cpu(rcu_cpu_kthread_loops, cpu)++;
+ local_irq_save(flags);
+ work = *workp;
+ *workp = 0;
+ local_irq_restore(flags);
+ if (work)
+ rcu_kthread_do_work();
+ local_bh_enable();
+ if (*workp != 0)
+ spincnt++;
+ else
+ spincnt = 0;
+ if (spincnt > 10) {
+ *statusp = RCU_KTHREAD_YIELDING;
+ rcu_yield(rcu_cpu_kthread_timer, (unsigned long)cpu);
+ spincnt = 0;
+ }
+ }
+ *statusp = RCU_KTHREAD_STOPPED;
+ return 0;
+}
+
+/*
+ * Spawn a per-CPU kthread, setting up affinity and priority.
+ * Because the CPU hotplug lock is held, no other CPU will be attempting
+ * to manipulate rcu_cpu_kthread_task. There might be another CPU
+ * attempting to access it during boot, but the locking in kthread_bind()
+ * will enforce sufficient ordering.
+ *
+ * Please note that we cannot simply refuse to wake up the per-CPU
+ * kthread because kthreads are created in TASK_UNINTERRUPTIBLE state,
+ * which can result in softlockup complaints if the task ends up being
+ * idle for more than a couple of minutes.
+ *
+ * However, please note also that we cannot bind the per-CPU kthread to its
+ * CPU until that CPU is fully online. We also cannot wait until the
+ * CPU is fully online before we create its per-CPU kthread, as this would
+ * deadlock the system when CPU notifiers tried waiting for grace
+ * periods. So we bind the per-CPU kthread to its CPU only if the CPU
+ * is online. If its CPU is not yet fully online, then the code in
+ * rcu_cpu_kthread() will wait until it is fully online, and then do
+ * the binding.
+ */
+static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu)
+{
+ struct sched_param sp;
+ struct task_struct *t;
+
+ if (!rcu_scheduler_fully_active ||
+ per_cpu(rcu_cpu_kthread_task, cpu) != NULL)
+ return 0;
+ t = kthread_create(rcu_cpu_kthread, (void *)(long)cpu, "rcuc%d", cpu);
+ if (IS_ERR(t))
+ return PTR_ERR(t);
+ if (cpu_online(cpu))
+ kthread_bind(t, cpu);
+ per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu;
+ WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL);
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+ per_cpu(rcu_cpu_kthread_task, cpu) = t;
+ wake_up_process(t); /* Get to TASK_INTERRUPTIBLE quickly. */
+ return 0;
+}
+
+/*
+ * Per-rcu_node kthread, which is in charge of waking up the per-CPU
+ * kthreads when needed. We ignore requests to wake up kthreads
+ * for offline CPUs, which is OK because force_quiescent_state()
+ * takes care of this case.
+ */
+static int rcu_node_kthread(void *arg)
+{
+ int cpu;
+ unsigned long flags;
+ unsigned long mask;
+ struct rcu_node *rnp = (struct rcu_node *)arg;
+ struct sched_param sp;
+ struct task_struct *t;
+
+ for (;;) {
+ rnp->node_kthread_status = RCU_KTHREAD_WAITING;
+ rcu_wait(atomic_read(&rnp->wakemask) != 0);
+ rnp->node_kthread_status = RCU_KTHREAD_RUNNING;
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ mask = atomic_xchg(&rnp->wakemask, 0);
+ rcu_initiate_boost(rnp, flags); /* releases rnp->lock. */
+ for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1) {
+ if ((mask & 0x1) == 0)
+ continue;
+ preempt_disable();
+ t = per_cpu(rcu_cpu_kthread_task, cpu);
+ if (!cpu_online(cpu) || t == NULL) {
+ preempt_enable();
+ continue;
+ }
+ per_cpu(rcu_cpu_has_work, cpu) = 1;
+ sp.sched_priority = RCU_KTHREAD_PRIO;
+ sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+ preempt_enable();
+ }
+ }
+ /* NOTREACHED */
+ rnp->node_kthread_status = RCU_KTHREAD_STOPPED;
+ return 0;
+}
+
+/*
+ * Set the per-rcu_node kthread's affinity to cover all CPUs that are
+ * served by the rcu_node in question. The CPU hotplug lock is still
+ * held, so the value of rnp->qsmaskinit will be stable.
+ *
+ * We don't include outgoingcpu in the affinity set, use -1 if there is
+ * no outgoing CPU. If there are no CPUs left in the affinity set,
+ * this function allows the kthread to execute on any CPU.
+ */
+static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
+{
+ cpumask_var_t cm;
+ int cpu;
+ unsigned long mask = rnp->qsmaskinit;
+
+ if (rnp->node_kthread_task == NULL)
+ return;
+ if (!alloc_cpumask_var(&cm, GFP_KERNEL))
+ return;
+ cpumask_clear(cm);
+ for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1)
+ if ((mask & 0x1) && cpu != outgoingcpu)
+ cpumask_set_cpu(cpu, cm);
+ if (cpumask_weight(cm) == 0) {
+ cpumask_setall(cm);
+ for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++)
+ cpumask_clear_cpu(cpu, cm);
+ WARN_ON_ONCE(cpumask_weight(cm) == 0);
+ }
+ set_cpus_allowed_ptr(rnp->node_kthread_task, cm);
+ rcu_boost_kthread_setaffinity(rnp, cm);
+ free_cpumask_var(cm);
+}
+
+/*
+ * Spawn a per-rcu_node kthread, setting priority and affinity.
+ * Called during boot before online/offline can happen, or, if
+ * during runtime, with the main CPU-hotplug locks held. So only
+ * one of these can be executing at a time.
+ */
+static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp,
+ struct rcu_node *rnp)
+{
+ unsigned long flags;
+ int rnp_index = rnp - &rsp->node[0];
+ struct sched_param sp;
+ struct task_struct *t;
+
+ if (!rcu_scheduler_fully_active ||
+ rnp->qsmaskinit == 0)
+ return 0;
+ if (rnp->node_kthread_task == NULL) {
+ t = kthread_create(rcu_node_kthread, (void *)rnp,
+ "rcun%d", rnp_index);
+ if (IS_ERR(t))
+ return PTR_ERR(t);
+ raw_spin_lock_irqsave(&rnp->lock, flags);
+ rnp->node_kthread_task = t;
+ raw_spin_unlock_irqrestore(&rnp->lock, flags);
+ sp.sched_priority = 99;
+ sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
+ wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */
+ }
+ return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index);
+}
+
+/*
+ * Spawn all kthreads -- called as soon as the scheduler is running.
+ */
+static int __init rcu_spawn_kthreads(void)
+{
+ int cpu;
+ struct rcu_node *rnp;
+
+ rcu_scheduler_fully_active = 1;
+ for_each_possible_cpu(cpu) {
+ per_cpu(rcu_cpu_has_work, cpu) = 0;
+ if (cpu_online(cpu))
+ (void)rcu_spawn_one_cpu_kthread(cpu);
+ }
+ rnp = rcu_get_root(rcu_state);
+ (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ if (NUM_RCU_NODES > 1) {
+ rcu_for_each_leaf_node(rcu_state, rnp)
+ (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ }
+ return 0;
+}
+early_initcall(rcu_spawn_kthreads);
+
+static void __cpuinit rcu_prepare_kthreads(int cpu)
+{
+ struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu);
+ struct rcu_node *rnp = rdp->mynode;
+
+ /* Fire up the incoming CPU's kthread and leaf rcu_node kthread. */
+ if (rcu_scheduler_fully_active) {
+ (void)rcu_spawn_one_cpu_kthread(cpu);
+ if (rnp->node_kthread_task == NULL)
+ (void)rcu_spawn_one_node_kthread(rcu_state, rnp);
+ }
}
#else /* #ifdef CONFIG_RCU_BOOST */
@@ -1315,23 +1726,39 @@
raw_spin_unlock_irqrestore(&rnp->lock, flags);
}
-static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp,
- cpumask_var_t cm)
+static void invoke_rcu_callbacks_kthread(void)
{
+ WARN_ON_ONCE(1);
}
static void rcu_preempt_boost_start_gp(struct rcu_node *rnp)
{
}
-static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp,
- struct rcu_node *rnp,
- int rnp_index)
+#ifdef CONFIG_HOTPLUG_CPU
+
+static void rcu_stop_cpu_kthread(int cpu)
{
- return 0;
}
-static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp)
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+
+static void rcu_node_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
+{
+}
+
+static void rcu_cpu_kthread_setrt(int cpu, int to_rt)
+{
+}
+
+static int __init rcu_scheduler_really_started(void)
+{
+ rcu_scheduler_fully_active = 1;
+ return 0;
+}
+early_initcall(rcu_scheduler_really_started);
+
+static void __cpuinit rcu_prepare_kthreads(int cpu)
{
}
@@ -1509,7 +1936,7 @@
*
* Because it is not legal to invoke rcu_process_callbacks() with irqs
* disabled, we do one pass of force_quiescent_state(), then do a
- * invoke_rcu_cpu_kthread() to cause rcu_process_callbacks() to be invoked
+ * invoke_rcu_core() to cause rcu_process_callbacks() to be invoked
* later. The per-cpu rcu_dyntick_drain variable controls the sequencing.
*/
int rcu_needs_cpu(int cpu)
@@ -1560,7 +1987,7 @@
/* If RCU callbacks are still pending, RCU still needs this CPU. */
if (c)
- invoke_rcu_cpu_kthread();
+ invoke_rcu_core();
return c;
}
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index 9678cc3..4e14487 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -46,6 +46,8 @@
#define RCU_TREE_NONCORE
#include "rcutree.h"
+#ifdef CONFIG_RCU_BOOST
+
DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_cpu);
DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
@@ -58,6 +60,8 @@
return "SRWOY"[kthread_status];
}
+#endif /* #ifdef CONFIG_RCU_BOOST */
+
static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp)
{
if (!rdp->beenonline)
@@ -76,7 +80,7 @@
rdp->dynticks_fqs);
#endif /* #ifdef CONFIG_NO_HZ */
seq_printf(m, " of=%lu ri=%lu", rdp->offline_fqs, rdp->resched_ipi);
- seq_printf(m, " ql=%ld qs=%c%c%c%c kt=%d/%c/%d ktl=%x b=%ld",
+ seq_printf(m, " ql=%ld qs=%c%c%c%c",
rdp->qlen,
".N"[rdp->nxttail[RCU_NEXT_READY_TAIL] !=
rdp->nxttail[RCU_NEXT_TAIL]],
@@ -84,13 +88,16 @@
rdp->nxttail[RCU_NEXT_READY_TAIL]],
".W"[rdp->nxttail[RCU_DONE_TAIL] !=
rdp->nxttail[RCU_WAIT_TAIL]],
- ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]],
+ ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]]);
+#ifdef CONFIG_RCU_BOOST
+ seq_printf(m, " kt=%d/%c/%d ktl=%x",
per_cpu(rcu_cpu_has_work, rdp->cpu),
convert_kthread_status(per_cpu(rcu_cpu_kthread_status,
rdp->cpu)),
per_cpu(rcu_cpu_kthread_cpu, rdp->cpu),
- per_cpu(rcu_cpu_kthread_loops, rdp->cpu) & 0xffff,
- rdp->blimit);
+ per_cpu(rcu_cpu_kthread_loops, rdp->cpu) & 0xffff);
+#endif /* #ifdef CONFIG_RCU_BOOST */
+ seq_printf(m, " b=%ld", rdp->blimit);
seq_printf(m, " ci=%lu co=%lu ca=%lu\n",
rdp->n_cbs_invoked, rdp->n_cbs_orphaned, rdp->n_cbs_adopted);
}
@@ -147,18 +154,21 @@
rdp->dynticks_fqs);
#endif /* #ifdef CONFIG_NO_HZ */
seq_printf(m, ",%lu,%lu", rdp->offline_fqs, rdp->resched_ipi);
- seq_printf(m, ",%ld,\"%c%c%c%c\",%d,\"%c\",%ld", rdp->qlen,
+ seq_printf(m, ",%ld,\"%c%c%c%c\"", rdp->qlen,
".N"[rdp->nxttail[RCU_NEXT_READY_TAIL] !=
rdp->nxttail[RCU_NEXT_TAIL]],
".R"[rdp->nxttail[RCU_WAIT_TAIL] !=
rdp->nxttail[RCU_NEXT_READY_TAIL]],
".W"[rdp->nxttail[RCU_DONE_TAIL] !=
rdp->nxttail[RCU_WAIT_TAIL]],
- ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]],
+ ".D"[&rdp->nxtlist != rdp->nxttail[RCU_DONE_TAIL]]);
+#ifdef CONFIG_RCU_BOOST
+ seq_printf(m, ",%d,\"%c\"",
per_cpu(rcu_cpu_has_work, rdp->cpu),
convert_kthread_status(per_cpu(rcu_cpu_kthread_status,
- rdp->cpu)),
- rdp->blimit);
+ rdp->cpu)));
+#endif /* #ifdef CONFIG_RCU_BOOST */
+ seq_printf(m, ",%ld", rdp->blimit);
seq_printf(m, ",%lu,%lu,%lu\n",
rdp->n_cbs_invoked, rdp->n_cbs_orphaned, rdp->n_cbs_adopted);
}
@@ -169,7 +179,11 @@
#ifdef CONFIG_NO_HZ
seq_puts(m, "\"dt\",\"dt nesting\",\"dt NMI nesting\",\"df\",");
#endif /* #ifdef CONFIG_NO_HZ */
- seq_puts(m, "\"of\",\"ri\",\"ql\",\"b\",\"ci\",\"co\",\"ca\"\n");
+ seq_puts(m, "\"of\",\"ri\",\"ql\",\"qs\"");
+#ifdef CONFIG_RCU_BOOST
+ seq_puts(m, "\"kt\",\"ktl\"");
+#endif /* #ifdef CONFIG_RCU_BOOST */
+ seq_puts(m, ",\"b\",\"ci\",\"co\",\"ca\"\n");
#ifdef CONFIG_TREE_PREEMPT_RCU
seq_puts(m, "\"rcu_preempt:\"\n");
PRINT_RCU_DATA(rcu_preempt_data, print_one_rcu_data_csv, m);
diff --git a/kernel/resource.c b/kernel/resource.c
index 798e2fa..3ff4017 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -38,6 +38,14 @@
};
EXPORT_SYMBOL(iomem_resource);
+/* constraints to be met while allocating resources */
+struct resource_constraint {
+ resource_size_t min, max, align;
+ resource_size_t (*alignf)(void *, const struct resource *,
+ resource_size_t, resource_size_t);
+ void *alignf_data;
+};
+
static DEFINE_RWLOCK(resource_lock);
static void *r_next(struct seq_file *m, void *v, loff_t *pos)
@@ -384,16 +392,13 @@
}
/*
- * Find empty slot in the resource tree given range and alignment.
+ * Find empty slot in the resource tree with the given range and
+ * alignment constraints
*/
-static int find_resource(struct resource *root, struct resource *new,
- resource_size_t size, resource_size_t min,
- resource_size_t max, resource_size_t align,
- resource_size_t (*alignf)(void *,
- const struct resource *,
- resource_size_t,
- resource_size_t),
- void *alignf_data)
+static int __find_resource(struct resource *root, struct resource *old,
+ struct resource *new,
+ resource_size_t size,
+ struct resource_constraint *constraint)
{
struct resource *this = root->child;
struct resource tmp = *new, avail, alloc;
@@ -404,25 +409,26 @@
* Skip past an allocated resource that starts at 0, since the assignment
* of this->start - 1 to tmp->end below would cause an underflow.
*/
- if (this && this->start == 0) {
- tmp.start = this->end + 1;
+ if (this && this->start == root->start) {
+ tmp.start = (this == old) ? old->start : this->end + 1;
this = this->sibling;
}
for(;;) {
if (this)
- tmp.end = this->start - 1;
+ tmp.end = (this == old) ? this->end : this->start - 1;
else
tmp.end = root->end;
- resource_clip(&tmp, min, max);
+ resource_clip(&tmp, constraint->min, constraint->max);
arch_remove_reservations(&tmp);
/* Check for overflow after ALIGN() */
avail = *new;
- avail.start = ALIGN(tmp.start, align);
+ avail.start = ALIGN(tmp.start, constraint->align);
avail.end = tmp.end;
if (avail.start >= tmp.start) {
- alloc.start = alignf(alignf_data, &avail, size, align);
+ alloc.start = constraint->alignf(constraint->alignf_data, &avail,
+ size, constraint->align);
alloc.end = alloc.start + size - 1;
if (resource_contains(&avail, &alloc)) {
new->start = alloc.start;
@@ -432,14 +438,75 @@
}
if (!this)
break;
- tmp.start = this->end + 1;
+ if (this != old)
+ tmp.start = this->end + 1;
this = this->sibling;
}
return -EBUSY;
}
+/*
+ * Find empty slot in the resource tree given range and alignment.
+ */
+static int find_resource(struct resource *root, struct resource *new,
+ resource_size_t size,
+ struct resource_constraint *constraint)
+{
+ return __find_resource(root, NULL, new, size, constraint);
+}
+
/**
- * allocate_resource - allocate empty slot in the resource tree given range & alignment
+ * reallocate_resource - allocate a slot in the resource tree given range & alignment.
+ * The resource will be relocated if the new size cannot be reallocated in the
+ * current location.
+ *
+ * @root: root resource descriptor
+ * @old: resource descriptor desired by caller
+ * @newsize: new size of the resource descriptor
+ * @constraint: the size and alignment constraints to be met.
+ */
+int reallocate_resource(struct resource *root, struct resource *old,
+ resource_size_t newsize,
+ struct resource_constraint *constraint)
+{
+ int err=0;
+ struct resource new = *old;
+ struct resource *conflict;
+
+ write_lock(&resource_lock);
+
+ if ((err = __find_resource(root, old, &new, newsize, constraint)))
+ goto out;
+
+ if (resource_contains(&new, old)) {
+ old->start = new.start;
+ old->end = new.end;
+ goto out;
+ }
+
+ if (old->child) {
+ err = -EBUSY;
+ goto out;
+ }
+
+ if (resource_contains(old, &new)) {
+ old->start = new.start;
+ old->end = new.end;
+ } else {
+ __release_resource(old);
+ *old = new;
+ conflict = __request_resource(root, old);
+ BUG_ON(conflict);
+ }
+out:
+ write_unlock(&resource_lock);
+ return err;
+}
+
+
+/**
+ * allocate_resource - allocate empty slot in the resource tree given range & alignment.
+ * The resource will be reallocated with a new size if it was already allocated
* @root: root resource descriptor
* @new: resource descriptor desired by caller
* @size: requested resource region size
@@ -459,12 +526,25 @@
void *alignf_data)
{
int err;
+ struct resource_constraint constraint;
if (!alignf)
alignf = simple_align_resource;
+ constraint.min = min;
+ constraint.max = max;
+ constraint.align = align;
+ constraint.alignf = alignf;
+ constraint.alignf_data = alignf_data;
+
+ if ( new->parent ) {
+ /* resource is already allocated, try reallocating with
+ the new constraints */
+ return reallocate_resource(root, new, size, &constraint);
+ }
+
write_lock(&resource_lock);
- err = find_resource(root, new, size, min, max, align, alignf, alignf_data);
+ err = find_resource(root, new, size, &constraint);
if (err >= 0 && __request_resource(root, new))
err = -EBUSY;
write_unlock(&resource_lock);
diff --git a/kernel/sched.c b/kernel/sched.c
index cbb3a0e..fde6ff9 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -292,8 +292,8 @@
* (The default weight is 1024 - so there's no practical
* limitation from this.)
*/
-#define MIN_SHARES 2
-#define MAX_SHARES (1UL << (18 + SCHED_LOAD_RESOLUTION))
+#define MIN_SHARES (1UL << 1)
+#define MAX_SHARES (1UL << 18)
static int root_task_group_load = ROOT_TASK_GROUP_LOAD;
#endif
@@ -605,10 +605,10 @@
/*
* Return the group to which this tasks belongs.
*
- * We use task_subsys_state_check() and extend the RCU verification
- * with lockdep_is_held(&p->pi_lock) because cpu_cgroup_attach()
- * holds that lock for each task it moves into the cgroup. Therefore
- * by holding that lock, we pin the task to the current cgroup.
+ * We use task_subsys_state_check() and extend the RCU verification with
+ * pi->lock and rq->lock because cpu_cgroup_attach() holds those locks for each
+ * task it moves into the cgroup. Therefore by holding either of those locks,
+ * we pin the task to the current cgroup.
*/
static inline struct task_group *task_group(struct task_struct *p)
{
@@ -616,7 +616,8 @@
struct cgroup_subsys_state *css;
css = task_subsys_state_check(p, cpu_cgroup_subsys_id,
- lockdep_is_held(&p->pi_lock));
+ lockdep_is_held(&p->pi_lock) ||
+ lockdep_is_held(&task_rq(p)->lock));
tg = container_of(css, struct task_group, css);
return autogroup_task_group(p, tg);
@@ -2200,6 +2201,16 @@
!(task_thread_info(p)->preempt_count & PREEMPT_ACTIVE));
#ifdef CONFIG_LOCKDEP
+ /*
+ * The caller should hold either p->pi_lock or rq->lock, when changing
+ * a task's CPU. ->pi_lock for waking tasks, rq->lock for runnable tasks.
+ *
+ * sched_move_task() holds both and thus holding either pins the cgroup,
+ * see set_task_rq().
+ *
+ * Furthermore, all task_rq users should acquire both locks, see
+ * task_rq_lock().
+ */
WARN_ON_ONCE(debug_locks && !(lockdep_is_held(&p->pi_lock) ||
lockdep_is_held(&task_rq(p)->lock)));
#endif
@@ -2447,6 +2458,10 @@
}
rcu_read_unlock();
}
+
+ if (wake_flags & WF_MIGRATED)
+ schedstat_inc(p, se.statistics.nr_wakeups_migrate);
+
#endif /* CONFIG_SMP */
schedstat_inc(rq, ttwu_count);
@@ -2455,9 +2470,6 @@
if (wake_flags & WF_SYNC)
schedstat_inc(p, se.statistics.nr_wakeups_sync);
- if (cpu != task_cpu(p))
- schedstat_inc(p, se.statistics.nr_wakeups_migrate);
-
#endif /* CONFIG_SCHEDSTATS */
}
@@ -2532,13 +2544,9 @@
}
#ifdef CONFIG_SMP
-static void sched_ttwu_pending(void)
+static void sched_ttwu_do_pending(struct task_struct *list)
{
struct rq *rq = this_rq();
- struct task_struct *list = xchg(&rq->wake_list, NULL);
-
- if (!list)
- return;
raw_spin_lock(&rq->lock);
@@ -2551,9 +2559,45 @@
raw_spin_unlock(&rq->lock);
}
+#ifdef CONFIG_HOTPLUG_CPU
+
+static void sched_ttwu_pending(void)
+{
+ struct rq *rq = this_rq();
+ struct task_struct *list = xchg(&rq->wake_list, NULL);
+
+ if (!list)
+ return;
+
+ sched_ttwu_do_pending(list);
+}
+
+#endif /* CONFIG_HOTPLUG_CPU */
+
void scheduler_ipi(void)
{
- sched_ttwu_pending();
+ struct rq *rq = this_rq();
+ struct task_struct *list = xchg(&rq->wake_list, NULL);
+
+ if (!list)
+ return;
+
+ /*
+ * Not all reschedule IPI handlers call irq_enter/irq_exit, since
+ * traditionally all their work was done from the interrupt return
+ * path. Now that we actually do some work, we need to make sure
+ * we do call them.
+ *
+ * Some archs already do call them, luckily irq_enter/exit nest
+ * properly.
+ *
+ * Arguably we should visit all archs and update all handlers,
+ * however a fair share of IPIs are still resched only so this would
+ * somewhat pessimize the simple resched case.
+ */
+ irq_enter();
+ sched_ttwu_do_pending(list);
+ irq_exit();
}
static void ttwu_queue_remote(struct task_struct *p, int cpu)
@@ -2600,6 +2644,7 @@
#if defined(CONFIG_SMP)
if (sched_feat(TTWU_QUEUE) && cpu != smp_processor_id()) {
+ sched_clock_cpu(cpu); /* sync clocks x-cpu */
ttwu_queue_remote(p, cpu);
return;
}
@@ -2674,8 +2719,10 @@
p->sched_class->task_waking(p);
cpu = select_task_rq(p, SD_BALANCE_WAKE, wake_flags);
- if (task_cpu(p) != cpu)
+ if (task_cpu(p) != cpu) {
+ wake_flags |= WF_MIGRATED;
set_task_cpu(p, cpu);
+ }
#endif /* CONFIG_SMP */
ttwu_queue(p, cpu);
@@ -6542,7 +6589,7 @@
break;
}
- if (!group->cpu_power) {
+ if (!group->sgp->power) {
printk(KERN_CONT "\n");
printk(KERN_ERR "ERROR: domain->cpu_power not "
"set\n");
@@ -6566,9 +6613,9 @@
cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group));
printk(KERN_CONT " %s", str);
- if (group->cpu_power != SCHED_POWER_SCALE) {
+ if (group->sgp->power != SCHED_POWER_SCALE) {
printk(KERN_CONT " (cpu_power = %d)",
- group->cpu_power);
+ group->sgp->power);
}
group = group->next;
@@ -6759,11 +6806,39 @@
return rd;
}
+static void free_sched_groups(struct sched_group *sg, int free_sgp)
+{
+ struct sched_group *tmp, *first;
+
+ if (!sg)
+ return;
+
+ first = sg;
+ do {
+ tmp = sg->next;
+
+ if (free_sgp && atomic_dec_and_test(&sg->sgp->ref))
+ kfree(sg->sgp);
+
+ kfree(sg);
+ sg = tmp;
+ } while (sg != first);
+}
+
static void free_sched_domain(struct rcu_head *rcu)
{
struct sched_domain *sd = container_of(rcu, struct sched_domain, rcu);
- if (atomic_dec_and_test(&sd->groups->ref))
+
+ /*
+ * If its an overlapping domain it has private groups, iterate and
+ * nuke them all.
+ */
+ if (sd->flags & SD_OVERLAP) {
+ free_sched_groups(sd->groups, 1);
+ } else if (atomic_dec_and_test(&sd->groups->ref)) {
+ kfree(sd->groups->sgp);
kfree(sd->groups);
+ }
kfree(sd);
}
@@ -6930,6 +7005,7 @@
struct sd_data {
struct sched_domain **__percpu sd;
struct sched_group **__percpu sg;
+ struct sched_group_power **__percpu sgp;
};
struct s_data {
@@ -6949,15 +7025,73 @@
typedef struct sched_domain *(*sched_domain_init_f)(struct sched_domain_topology_level *tl, int cpu);
typedef const struct cpumask *(*sched_domain_mask_f)(int cpu);
+#define SDTL_OVERLAP 0x01
+
struct sched_domain_topology_level {
sched_domain_init_f init;
sched_domain_mask_f mask;
+ int flags;
struct sd_data data;
};
-/*
- * Assumes the sched_domain tree is fully constructed
- */
+static int
+build_overlap_sched_groups(struct sched_domain *sd, int cpu)
+{
+ struct sched_group *first = NULL, *last = NULL, *groups = NULL, *sg;
+ const struct cpumask *span = sched_domain_span(sd);
+ struct cpumask *covered = sched_domains_tmpmask;
+ struct sd_data *sdd = sd->private;
+ struct sched_domain *child;
+ int i;
+
+ cpumask_clear(covered);
+
+ for_each_cpu(i, span) {
+ struct cpumask *sg_span;
+
+ if (cpumask_test_cpu(i, covered))
+ continue;
+
+ sg = kzalloc_node(sizeof(struct sched_group) + cpumask_size(),
+ GFP_KERNEL, cpu_to_node(i));
+
+ if (!sg)
+ goto fail;
+
+ sg_span = sched_group_cpus(sg);
+
+ child = *per_cpu_ptr(sdd->sd, i);
+ if (child->child) {
+ child = child->child;
+ cpumask_copy(sg_span, sched_domain_span(child));
+ } else
+ cpumask_set_cpu(i, sg_span);
+
+ cpumask_or(covered, covered, sg_span);
+
+ sg->sgp = *per_cpu_ptr(sdd->sgp, cpumask_first(sg_span));
+ atomic_inc(&sg->sgp->ref);
+
+ if (cpumask_test_cpu(cpu, sg_span))
+ groups = sg;
+
+ if (!first)
+ first = sg;
+ if (last)
+ last->next = sg;
+ last = sg;
+ last->next = first;
+ }
+ sd->groups = groups;
+
+ return 0;
+
+fail:
+ free_sched_groups(first, 0);
+
+ return -ENOMEM;
+}
+
static int get_group(int cpu, struct sd_data *sdd, struct sched_group **sg)
{
struct sched_domain *sd = *per_cpu_ptr(sdd->sd, cpu);
@@ -6966,24 +7100,24 @@
if (child)
cpu = cpumask_first(sched_domain_span(child));
- if (sg)
+ if (sg) {
*sg = *per_cpu_ptr(sdd->sg, cpu);
+ (*sg)->sgp = *per_cpu_ptr(sdd->sgp, cpu);
+ atomic_set(&(*sg)->sgp->ref, 1); /* for claim_allocations */
+ }
return cpu;
}
/*
- * build_sched_groups takes the cpumask we wish to span, and a pointer
- * to a function which identifies what group(along with sched group) a CPU
- * belongs to. The return value of group_fn must be a >= 0 and < nr_cpu_ids
- * (due to the fact that we keep track of groups covered with a struct cpumask).
- *
* build_sched_groups will build a circular linked list of the groups
* covered by the given span, and will set each group's ->cpumask correctly,
* and ->cpu_power to 0.
+ *
+ * Assumes the sched_domain tree is fully constructed
*/
-static void
-build_sched_groups(struct sched_domain *sd)
+static int
+build_sched_groups(struct sched_domain *sd, int cpu)
{
struct sched_group *first = NULL, *last = NULL;
struct sd_data *sdd = sd->private;
@@ -6991,6 +7125,12 @@
struct cpumask *covered;
int i;
+ get_group(cpu, sdd, &sd->groups);
+ atomic_inc(&sd->groups->ref);
+
+ if (cpu != cpumask_first(sched_domain_span(sd)))
+ return 0;
+
lockdep_assert_held(&sched_domains_mutex);
covered = sched_domains_tmpmask;
@@ -7005,7 +7145,7 @@
continue;
cpumask_clear(sched_group_cpus(sg));
- sg->cpu_power = 0;
+ sg->sgp->power = 0;
for_each_cpu(j, span) {
if (get_group(j, sdd, NULL) != group)
@@ -7022,6 +7162,8 @@
last = sg;
}
last->next = first;
+
+ return 0;
}
/*
@@ -7036,13 +7178,18 @@
*/
static void init_sched_groups_power(int cpu, struct sched_domain *sd)
{
- WARN_ON(!sd || !sd->groups);
+ struct sched_group *sg = sd->groups;
- if (cpu != group_first_cpu(sd->groups))
+ WARN_ON(!sd || !sg);
+
+ do {
+ sg->group_weight = cpumask_weight(sched_group_cpus(sg));
+ sg = sg->next;
+ } while (sg != sd->groups);
+
+ if (cpu != group_first_cpu(sg))
return;
- sd->groups->group_weight = cpumask_weight(sched_group_cpus(sd->groups));
-
update_group_power(sd, cpu);
}
@@ -7162,15 +7309,15 @@
static void claim_allocations(int cpu, struct sched_domain *sd)
{
struct sd_data *sdd = sd->private;
- struct sched_group *sg = sd->groups;
WARN_ON_ONCE(*per_cpu_ptr(sdd->sd, cpu) != sd);
*per_cpu_ptr(sdd->sd, cpu) = NULL;
- if (cpu == cpumask_first(sched_group_cpus(sg))) {
- WARN_ON_ONCE(*per_cpu_ptr(sdd->sg, cpu) != sg);
+ if (atomic_read(&(*per_cpu_ptr(sdd->sg, cpu))->ref))
*per_cpu_ptr(sdd->sg, cpu) = NULL;
- }
+
+ if (atomic_read(&(*per_cpu_ptr(sdd->sgp, cpu))->ref))
+ *per_cpu_ptr(sdd->sgp, cpu) = NULL;
}
#ifdef CONFIG_SCHED_SMT
@@ -7195,7 +7342,7 @@
#endif
{ sd_init_CPU, cpu_cpu_mask, },
#ifdef CONFIG_NUMA
- { sd_init_NODE, cpu_node_mask, },
+ { sd_init_NODE, cpu_node_mask, SDTL_OVERLAP, },
{ sd_init_ALLNODES, cpu_allnodes_mask, },
#endif
{ NULL, },
@@ -7219,9 +7366,14 @@
if (!sdd->sg)
return -ENOMEM;
+ sdd->sgp = alloc_percpu(struct sched_group_power *);
+ if (!sdd->sgp)
+ return -ENOMEM;
+
for_each_cpu(j, cpu_map) {
struct sched_domain *sd;
struct sched_group *sg;
+ struct sched_group_power *sgp;
sd = kzalloc_node(sizeof(struct sched_domain) + cpumask_size(),
GFP_KERNEL, cpu_to_node(j));
@@ -7236,6 +7388,13 @@
return -ENOMEM;
*per_cpu_ptr(sdd->sg, j) = sg;
+
+ sgp = kzalloc_node(sizeof(struct sched_group_power),
+ GFP_KERNEL, cpu_to_node(j));
+ if (!sgp)
+ return -ENOMEM;
+
+ *per_cpu_ptr(sdd->sgp, j) = sgp;
}
}
@@ -7251,11 +7410,15 @@
struct sd_data *sdd = &tl->data;
for_each_cpu(j, cpu_map) {
- kfree(*per_cpu_ptr(sdd->sd, j));
+ struct sched_domain *sd = *per_cpu_ptr(sdd->sd, j);
+ if (sd && (sd->flags & SD_OVERLAP))
+ free_sched_groups(sd->groups, 0);
kfree(*per_cpu_ptr(sdd->sg, j));
+ kfree(*per_cpu_ptr(sdd->sgp, j));
}
free_percpu(sdd->sd);
free_percpu(sdd->sg);
+ free_percpu(sdd->sgp);
}
}
@@ -7301,8 +7464,13 @@
struct sched_domain_topology_level *tl;
sd = NULL;
- for (tl = sched_domain_topology; tl->init; tl++)
+ for (tl = sched_domain_topology; tl->init; tl++) {
sd = build_sched_domain(tl, &d, cpu_map, attr, sd, i);
+ if (tl->flags & SDTL_OVERLAP || sched_feat(FORCE_SD_OVERLAP))
+ sd->flags |= SD_OVERLAP;
+ if (cpumask_equal(cpu_map, sched_domain_span(sd)))
+ break;
+ }
while (sd->child)
sd = sd->child;
@@ -7314,13 +7482,13 @@
for_each_cpu(i, cpu_map) {
for (sd = *per_cpu_ptr(d.sd, i); sd; sd = sd->parent) {
sd->span_weight = cpumask_weight(sched_domain_span(sd));
- get_group(i, sd->private, &sd->groups);
- atomic_inc(&sd->groups->ref);
-
- if (i != cpumask_first(sched_domain_span(sd)))
- continue;
-
- build_sched_groups(sd);
+ if (sd->flags & SD_OVERLAP) {
+ if (build_overlap_sched_groups(sd, i))
+ goto error;
+ } else {
+ if (build_sched_groups(sd, i))
+ goto error;
+ }
}
}
@@ -7742,6 +7910,9 @@
#endif
#endif
cfs_rq->min_vruntime = (u64)(-(1LL << 20));
+#ifndef CONFIG_64BIT
+ cfs_rq->min_vruntime_copy = cfs_rq->min_vruntime;
+#endif
}
static void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq)
@@ -8435,10 +8606,7 @@
if (!tg->se[0])
return -EINVAL;
- if (shares < MIN_SHARES)
- shares = MIN_SHARES;
- else if (shares > MAX_SHARES)
- shares = MAX_SHARES;
+ shares = clamp(shares, scale_load(MIN_SHARES), scale_load(MAX_SHARES));
mutex_lock(&shares_mutex);
if (tg->shares == shares)
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 433491c2..c768588 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1585,7 +1585,7 @@
}
/* Adjust by relative CPU power of the group */
- avg_load = (avg_load * SCHED_POWER_SCALE) / group->cpu_power;
+ avg_load = (avg_load * SCHED_POWER_SCALE) / group->sgp->power;
if (local_group) {
this_load = avg_load;
@@ -2631,7 +2631,7 @@
power >>= SCHED_POWER_SHIFT;
}
- sdg->cpu_power_orig = power;
+ sdg->sgp->power_orig = power;
if (sched_feat(ARCH_POWER))
power *= arch_scale_freq_power(sd, cpu);
@@ -2647,7 +2647,7 @@
power = 1;
cpu_rq(cpu)->cpu_power = power;
- sdg->cpu_power = power;
+ sdg->sgp->power = power;
}
static void update_group_power(struct sched_domain *sd, int cpu)
@@ -2665,11 +2665,11 @@
group = child->groups;
do {
- power += group->cpu_power;
+ power += group->sgp->power;
group = group->next;
} while (group != child->groups);
- sdg->cpu_power = power;
+ sdg->sgp->power = power;
}
/*
@@ -2691,7 +2691,7 @@
/*
* If ~90% of the cpu_power is still there, we're good.
*/
- if (group->cpu_power * 32 > group->cpu_power_orig * 29)
+ if (group->sgp->power * 32 > group->sgp->power_orig * 29)
return 1;
return 0;
@@ -2771,7 +2771,7 @@
}
/* Adjust by relative CPU power of the group */
- sgs->avg_load = (sgs->group_load*SCHED_POWER_SCALE) / group->cpu_power;
+ sgs->avg_load = (sgs->group_load*SCHED_POWER_SCALE) / group->sgp->power;
/*
* Consider the group unbalanced when the imbalance is larger
@@ -2788,7 +2788,7 @@
if ((max_cpu_load - min_cpu_load) >= avg_load_per_task && max_nr_running > 1)
sgs->group_imb = 1;
- sgs->group_capacity = DIV_ROUND_CLOSEST(group->cpu_power,
+ sgs->group_capacity = DIV_ROUND_CLOSEST(group->sgp->power,
SCHED_POWER_SCALE);
if (!sgs->group_capacity)
sgs->group_capacity = fix_small_capacity(sd, group);
@@ -2877,7 +2877,7 @@
return;
sds->total_load += sgs.group_load;
- sds->total_pwr += sg->cpu_power;
+ sds->total_pwr += sg->sgp->power;
/*
* In case the child domain prefers tasks go to siblings
@@ -2962,7 +2962,7 @@
if (this_cpu > busiest_cpu)
return 0;
- *imbalance = DIV_ROUND_CLOSEST(sds->max_load * sds->busiest->cpu_power,
+ *imbalance = DIV_ROUND_CLOSEST(sds->max_load * sds->busiest->sgp->power,
SCHED_POWER_SCALE);
return 1;
}
@@ -2993,7 +2993,7 @@
scaled_busy_load_per_task = sds->busiest_load_per_task
* SCHED_POWER_SCALE;
- scaled_busy_load_per_task /= sds->busiest->cpu_power;
+ scaled_busy_load_per_task /= sds->busiest->sgp->power;
if (sds->max_load - sds->this_load + scaled_busy_load_per_task >=
(scaled_busy_load_per_task * imbn)) {
@@ -3007,28 +3007,28 @@
* moving them.
*/
- pwr_now += sds->busiest->cpu_power *
+ pwr_now += sds->busiest->sgp->power *
min(sds->busiest_load_per_task, sds->max_load);
- pwr_now += sds->this->cpu_power *
+ pwr_now += sds->this->sgp->power *
min(sds->this_load_per_task, sds->this_load);
pwr_now /= SCHED_POWER_SCALE;
/* Amount of load we'd subtract */
tmp = (sds->busiest_load_per_task * SCHED_POWER_SCALE) /
- sds->busiest->cpu_power;
+ sds->busiest->sgp->power;
if (sds->max_load > tmp)
- pwr_move += sds->busiest->cpu_power *
+ pwr_move += sds->busiest->sgp->power *
min(sds->busiest_load_per_task, sds->max_load - tmp);
/* Amount of load we'd add */
- if (sds->max_load * sds->busiest->cpu_power <
+ if (sds->max_load * sds->busiest->sgp->power <
sds->busiest_load_per_task * SCHED_POWER_SCALE)
- tmp = (sds->max_load * sds->busiest->cpu_power) /
- sds->this->cpu_power;
+ tmp = (sds->max_load * sds->busiest->sgp->power) /
+ sds->this->sgp->power;
else
tmp = (sds->busiest_load_per_task * SCHED_POWER_SCALE) /
- sds->this->cpu_power;
- pwr_move += sds->this->cpu_power *
+ sds->this->sgp->power;
+ pwr_move += sds->this->sgp->power *
min(sds->this_load_per_task, sds->this_load + tmp);
pwr_move /= SCHED_POWER_SCALE;
@@ -3074,7 +3074,7 @@
load_above_capacity *= (SCHED_LOAD_SCALE * SCHED_POWER_SCALE);
- load_above_capacity /= sds->busiest->cpu_power;
+ load_above_capacity /= sds->busiest->sgp->power;
}
/*
@@ -3090,8 +3090,8 @@
max_pull = min(sds->max_load - sds->avg_load, load_above_capacity);
/* How much load to actually move to equalise the imbalance */
- *imbalance = min(max_pull * sds->busiest->cpu_power,
- (sds->avg_load - sds->this_load) * sds->this->cpu_power)
+ *imbalance = min(max_pull * sds->busiest->sgp->power,
+ (sds->avg_load - sds->this_load) * sds->this->sgp->power)
/ SCHED_POWER_SCALE;
/*
diff --git a/kernel/sched_features.h b/kernel/sched_features.h
index be40f73..1e7066d 100644
--- a/kernel/sched_features.h
+++ b/kernel/sched_features.h
@@ -70,3 +70,5 @@
* using the scheduler IPI. Reduces rq->lock contention/bounces.
*/
SCHED_FEAT(TTWU_QUEUE, 1)
+
+SCHED_FEAT(FORCE_SD_OVERLAP, 0)
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 88725c9..10d0182 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -1096,7 +1096,7 @@
* to move current somewhere else, making room for our non-migratable
* task.
*/
- if (p->prio == rq->curr->prio && !need_resched())
+ if (p->prio == rq->curr->prio && !test_tsk_need_resched(rq->curr))
check_preempt_equal_prio(rq, p);
#endif
}
@@ -1239,6 +1239,10 @@
int this_cpu = smp_processor_id();
int cpu = task_cpu(task);
+ /* Make sure the mask is initialized first */
+ if (unlikely(!lowest_mask))
+ return -1;
+
if (task->rt.nr_cpus_allowed == 1)
return -1; /* No other targets possible */
diff --git a/kernel/signal.c b/kernel/signal.c
index 86c32b8..415d85d 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1178,18 +1178,25 @@
{
struct sighand_struct *sighand;
- rcu_read_lock();
for (;;) {
+ local_irq_save(*flags);
+ rcu_read_lock();
sighand = rcu_dereference(tsk->sighand);
- if (unlikely(sighand == NULL))
+ if (unlikely(sighand == NULL)) {
+ rcu_read_unlock();
+ local_irq_restore(*flags);
break;
+ }
- spin_lock_irqsave(&sighand->siglock, *flags);
- if (likely(sighand == tsk->sighand))
+ spin_lock(&sighand->siglock);
+ if (likely(sighand == tsk->sighand)) {
+ rcu_read_unlock();
break;
- spin_unlock_irqrestore(&sighand->siglock, *flags);
+ }
+ spin_unlock(&sighand->siglock);
+ rcu_read_unlock();
+ local_irq_restore(*flags);
}
- rcu_read_unlock();
return sighand;
}
@@ -2365,7 +2372,7 @@
/**
* sys_rt_sigprocmask - change the list of currently blocked signals
* @how: whether to add, remove, or set signals
- * @set: stores pending signals
+ * @nset: stores pending signals
* @oset: previous value of signal mask if non-null
* @sigsetsize: size of sigset_t type
*/
diff --git a/kernel/smp.c b/kernel/smp.c
index 73a1951..fb67dfa 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -74,7 +74,7 @@
.notifier_call = hotplug_cfd,
};
-static int __cpuinit init_call_single_data(void)
+void __init call_function_init(void)
{
void *cpu = (void *)(long)smp_processor_id();
int i;
@@ -88,10 +88,7 @@
hotplug_cfd(&hotplug_cfd_notifier, CPU_UP_PREPARE, cpu);
register_cpu_notifier(&hotplug_cfd_notifier);
-
- return 0;
}
-early_initcall(init_call_single_data);
/*
* csd_lock/csd_unlock used to serialize access to per-cpu csd resources
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 1396017..fca82c3 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -58,7 +58,7 @@
char *softirq_to_name[NR_SOFTIRQS] = {
"HI", "TIMER", "NET_TX", "NET_RX", "BLOCK", "BLOCK_IOPOLL",
- "TASKLET", "SCHED", "HRTIMER"
+ "TASKLET", "SCHED", "HRTIMER", "RCU"
};
/*
@@ -315,16 +315,24 @@
{
if (!force_irqthreads)
__do_softirq();
- else
+ else {
+ __local_bh_disable((unsigned long)__builtin_return_address(0),
+ SOFTIRQ_OFFSET);
wakeup_softirqd();
+ __local_bh_enable(SOFTIRQ_OFFSET);
+ }
}
#else
static inline void invoke_softirq(void)
{
if (!force_irqthreads)
do_softirq();
- else
+ else {
+ __local_bh_disable((unsigned long)__builtin_return_address(0),
+ SOFTIRQ_OFFSET);
wakeup_softirqd();
+ __local_bh_enable(SOFTIRQ_OFFSET);
+ }
}
#endif
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 4fc9244..f175d98 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -938,6 +938,12 @@
},
#endif
#ifdef CONFIG_PERF_EVENTS
+ /*
+ * User-space scripts rely on the existence of this file
+ * as a feature check for perf_events being enabled.
+ *
+ * So it's an ABI, do not remove!
+ */
{
.procname = "perf_event_paranoid",
.data = &sysctl_perf_event_paranoid,
diff --git a/kernel/taskstats.c b/kernel/taskstats.c
index 9ffea36..fc0f220 100644
--- a/kernel/taskstats.c
+++ b/kernel/taskstats.c
@@ -285,16 +285,18 @@
static int add_del_listener(pid_t pid, const struct cpumask *mask, int isadd)
{
struct listener_list *listeners;
- struct listener *s, *tmp;
+ struct listener *s, *tmp, *s2;
unsigned int cpu;
if (!cpumask_subset(mask, cpu_possible_mask))
return -EINVAL;
+ s = NULL;
if (isadd == REGISTER) {
for_each_cpu(cpu, mask) {
- s = kmalloc_node(sizeof(struct listener), GFP_KERNEL,
- cpu_to_node(cpu));
+ if (!s)
+ s = kmalloc_node(sizeof(struct listener),
+ GFP_KERNEL, cpu_to_node(cpu));
if (!s)
goto cleanup;
s->pid = pid;
@@ -303,9 +305,16 @@
listeners = &per_cpu(listener_array, cpu);
down_write(&listeners->sem);
+ list_for_each_entry_safe(s2, tmp, &listeners->list, list) {
+ if (s2->pid == pid)
+ goto next_cpu;
+ }
list_add(&s->list, &listeners->list);
+ s = NULL;
+next_cpu:
up_write(&listeners->sem);
}
+ kfree(s);
return 0;
}
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index 2d96624..59f369f 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -42,15 +42,75 @@
clockid_t base_clockid;
} alarm_bases[ALARM_NUMTYPE];
+/* freezer delta & lock used to handle clock_nanosleep triggered wakeups */
+static ktime_t freezer_delta;
+static DEFINE_SPINLOCK(freezer_delta_lock);
+
#ifdef CONFIG_RTC_CLASS
/* rtc timer and device for setting alarm wakeups at suspend */
static struct rtc_timer rtctimer;
static struct rtc_device *rtcdev;
-#endif
+static DEFINE_SPINLOCK(rtcdev_lock);
-/* freezer delta & lock used to handle clock_nanosleep triggered wakeups */
-static ktime_t freezer_delta;
-static DEFINE_SPINLOCK(freezer_delta_lock);
+/**
+ * has_wakealarm - check rtc device has wakealarm ability
+ * @dev: current device
+ * @name_ptr: name to be returned
+ *
+ * This helper function checks to see if the rtc device can wake
+ * from suspend.
+ */
+static int has_wakealarm(struct device *dev, void *name_ptr)
+{
+ struct rtc_device *candidate = to_rtc_device(dev);
+
+ if (!candidate->ops->set_alarm)
+ return 0;
+ if (!device_may_wakeup(candidate->dev.parent))
+ return 0;
+
+ *(const char **)name_ptr = dev_name(dev);
+ return 1;
+}
+
+/**
+ * alarmtimer_get_rtcdev - Return selected rtcdevice
+ *
+ * This function returns the rtc device to use for wakealarms.
+ * If one has not already been chosen, it checks to see if a
+ * functional rtc device is available.
+ */
+static struct rtc_device *alarmtimer_get_rtcdev(void)
+{
+ struct device *dev;
+ char *str;
+ unsigned long flags;
+ struct rtc_device *ret;
+
+ spin_lock_irqsave(&rtcdev_lock, flags);
+ if (!rtcdev) {
+ /* Find an rtc device and init the rtc_timer */
+ dev = class_find_device(rtc_class, NULL, &str, has_wakealarm);
+ /* If we have a device then str is valid. See has_wakealarm() */
+ if (dev) {
+ rtcdev = rtc_class_open(str);
+ /*
+ * Drop the reference we got in class_find_device,
+ * rtc_open takes its own.
+ */
+ put_device(dev);
+ rtc_timer_init(&rtctimer, NULL, NULL);
+ }
+ }
+ ret = rtcdev;
+ spin_unlock_irqrestore(&rtcdev_lock, flags);
+
+ return ret;
+}
+#else
+#define alarmtimer_get_rtcdev() (0)
+#define rtcdev (0)
+#endif
/**
@@ -166,6 +226,7 @@
struct rtc_time tm;
ktime_t min, now;
unsigned long flags;
+ struct rtc_device *rtc;
int i;
spin_lock_irqsave(&freezer_delta_lock, flags);
@@ -173,8 +234,9 @@
freezer_delta = ktime_set(0, 0);
spin_unlock_irqrestore(&freezer_delta_lock, flags);
+ rtc = rtcdev;
/* If we have no rtcdev, just return */
- if (!rtcdev)
+ if (!rtc)
return 0;
/* Find the soonest timer to expire*/
@@ -199,12 +261,12 @@
WARN_ON(min.tv64 < NSEC_PER_SEC);
/* Setup an rtc timer to fire that far in the future */
- rtc_timer_cancel(rtcdev, &rtctimer);
- rtc_read_time(rtcdev, &tm);
+ rtc_timer_cancel(rtc, &rtctimer);
+ rtc_read_time(rtc, &tm);
now = rtc_tm_to_ktime(tm);
now = ktime_add(now, min);
- rtc_timer_start(rtcdev, &rtctimer, now, ktime_set(0, 0));
+ rtc_timer_start(rtc, &rtctimer, now, ktime_set(0, 0));
return 0;
}
@@ -322,6 +384,9 @@
{
clockid_t baseid = alarm_bases[clock2alarm(which_clock)].base_clockid;
+ if (!alarmtimer_get_rtcdev())
+ return -ENOTSUPP;
+
return hrtimer_get_res(baseid, tp);
}
@@ -336,6 +401,9 @@
{
struct alarm_base *base = &alarm_bases[clock2alarm(which_clock)];
+ if (!alarmtimer_get_rtcdev())
+ return -ENOTSUPP;
+
*tp = ktime_to_timespec(base->gettime());
return 0;
}
@@ -351,6 +419,9 @@
enum alarmtimer_type type;
struct alarm_base *base;
+ if (!alarmtimer_get_rtcdev())
+ return -ENOTSUPP;
+
if (!capable(CAP_WAKE_ALARM))
return -EPERM;
@@ -385,6 +456,9 @@
*/
static int alarm_timer_del(struct k_itimer *timr)
{
+ if (!rtcdev)
+ return -ENOTSUPP;
+
alarm_cancel(&timr->it.alarmtimer);
return 0;
}
@@ -402,6 +476,9 @@
struct itimerspec *new_setting,
struct itimerspec *old_setting)
{
+ if (!rtcdev)
+ return -ENOTSUPP;
+
/* Save old values */
old_setting->it_interval =
ktime_to_timespec(timr->it.alarmtimer.period);
@@ -541,6 +618,9 @@
int ret = 0;
struct restart_block *restart;
+ if (!alarmtimer_get_rtcdev())
+ return -ENOTSUPP;
+
if (!capable(CAP_WAKE_ALARM))
return -EPERM;
@@ -638,65 +718,3 @@
}
device_initcall(alarmtimer_init);
-#ifdef CONFIG_RTC_CLASS
-/**
- * has_wakealarm - check rtc device has wakealarm ability
- * @dev: current device
- * @name_ptr: name to be returned
- *
- * This helper function checks to see if the rtc device can wake
- * from suspend.
- */
-static int __init has_wakealarm(struct device *dev, void *name_ptr)
-{
- struct rtc_device *candidate = to_rtc_device(dev);
-
- if (!candidate->ops->set_alarm)
- return 0;
- if (!device_may_wakeup(candidate->dev.parent))
- return 0;
-
- *(const char **)name_ptr = dev_name(dev);
- return 1;
-}
-
-/**
- * alarmtimer_init_late - Late initializing of alarmtimer code
- *
- * This function locates a rtc device to use for wakealarms.
- * Run as late_initcall to make sure rtc devices have been
- * registered.
- */
-static int __init alarmtimer_init_late(void)
-{
- struct device *dev;
- char *str;
-
- /* Find an rtc device and init the rtc_timer */
- dev = class_find_device(rtc_class, NULL, &str, has_wakealarm);
- /* If we have a device then str is valid. See has_wakealarm() */
- if (dev) {
- rtcdev = rtc_class_open(str);
- /*
- * Drop the reference we got in class_find_device,
- * rtc_open takes its own.
- */
- put_device(dev);
- }
- if (!rtcdev) {
- printk(KERN_WARNING "No RTC device found, ALARM timers will"
- " not wake from suspend");
- }
- rtc_timer_init(&rtctimer, NULL, NULL);
-
- return 0;
-}
-#else
-static int __init alarmtimer_init_late(void)
-{
- printk(KERN_WARNING "Kernel not built with RTC support, ALARM timers"
- " will not wake from suspend");
- return 0;
-}
-#endif
-late_initcall(alarmtimer_init_late);
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index c027d4f..e4c699d 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -182,7 +182,10 @@
unsigned long flags;
BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED);
- BUG_ON(!dev->cpumask);
+ if (!dev->cpumask) {
+ WARN_ON(num_possible_cpus() > 1);
+ dev->cpumask = cpumask_of(smp_processor_id());
+ }
raw_spin_lock_irqsave(&clockevents_lock, flags);
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 1c95fd6..e0980f0 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -185,7 +185,6 @@
static struct timer_list watchdog_timer;
static DECLARE_WORK(watchdog_work, clocksource_watchdog_work);
static DEFINE_SPINLOCK(watchdog_lock);
-static cycle_t watchdog_last;
static int watchdog_running;
static int clocksource_watchdog_kthread(void *data);
@@ -254,11 +253,6 @@
if (!watchdog_running)
goto out;
- wdnow = watchdog->read(watchdog);
- wd_nsec = clocksource_cyc2ns((wdnow - watchdog_last) & watchdog->mask,
- watchdog->mult, watchdog->shift);
- watchdog_last = wdnow;
-
list_for_each_entry(cs, &watchdog_list, wd_list) {
/* Clocksource already marked unstable? */
@@ -268,19 +262,28 @@
continue;
}
+ local_irq_disable();
csnow = cs->read(cs);
+ wdnow = watchdog->read(watchdog);
+ local_irq_enable();
/* Clocksource initialized ? */
if (!(cs->flags & CLOCK_SOURCE_WATCHDOG)) {
cs->flags |= CLOCK_SOURCE_WATCHDOG;
- cs->wd_last = csnow;
+ cs->wd_last = wdnow;
+ cs->cs_last = csnow;
continue;
}
- /* Check the deviation from the watchdog clocksource. */
- cs_nsec = clocksource_cyc2ns((csnow - cs->wd_last) &
+ wd_nsec = clocksource_cyc2ns((wdnow - cs->wd_last) & watchdog->mask,
+ watchdog->mult, watchdog->shift);
+
+ cs_nsec = clocksource_cyc2ns((csnow - cs->cs_last) &
cs->mask, cs->mult, cs->shift);
- cs->wd_last = csnow;
+ cs->cs_last = csnow;
+ cs->wd_last = wdnow;
+
+ /* Check the deviation from the watchdog clocksource. */
if (abs(cs_nsec - wd_nsec) > WATCHDOG_THRESHOLD) {
clocksource_unstable(cs, cs_nsec - wd_nsec);
continue;
@@ -318,7 +321,6 @@
return;
init_timer(&watchdog_timer);
watchdog_timer.function = clocksource_watchdog;
- watchdog_last = watchdog->read(watchdog);
watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
add_timer_on(&watchdog_timer, cpumask_first(cpu_online_mask));
watchdog_running = 1;
diff --git a/kernel/timer.c b/kernel/timer.c
index fd61986..8cff361 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -749,16 +749,15 @@
unsigned long expires_limit, mask;
int bit;
- expires_limit = expires;
-
if (timer->slack >= 0) {
expires_limit = expires + timer->slack;
} else {
- unsigned long now = jiffies;
+ long delta = expires - jiffies;
- /* No slack, if already expired else auto slack 0.4% */
- if (time_after(expires, now))
- expires_limit = expires + (expires - now)/256;
+ if (delta < 256)
+ return expires;
+
+ expires_limit = expires + delta / 256;
}
mask = expires ^ expires_limit;
if (mask == 0)
@@ -795,6 +794,8 @@
*/
int mod_timer(struct timer_list *timer, unsigned long expires)
{
+ expires = apply_slack(timer, expires);
+
/*
* This is a common optimization triggered by the
* networking code - if the timer is re-modified
@@ -803,8 +804,6 @@
if (timer_pending(timer) && timer->expires == expires)
return 1;
- expires = apply_slack(timer, expires);
-
return __mod_timer(timer, expires, false, TIMER_NOT_PINNED);
}
EXPORT_SYMBOL(mod_timer);
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 1ee417f..908038f 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -2740,7 +2740,7 @@
{
char *func, *command, *next = buff;
struct ftrace_func_command *p;
- int ret;
+ int ret = -EINVAL;
func = strsep(&next, ":");
@@ -3330,6 +3330,7 @@
{
unsigned long *p;
unsigned long addr;
+ unsigned long flags;
mutex_lock(&ftrace_lock);
p = start;
@@ -3346,7 +3347,13 @@
ftrace_record_ip(addr);
}
+ /*
+ * Disable interrupts to prevent interrupts from executing
+ * code that is being modified.
+ */
+ local_irq_save(flags);
ftrace_update_code(mod);
+ local_irq_restore(flags);
mutex_unlock(&ftrace_lock);
return 0;
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index f925c45..27d13b3 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -1870,8 +1870,12 @@
#ifdef CONFIG_FTRACE_STARTUP_TEST
-static int kprobe_trace_selftest_target(int a1, int a2, int a3,
- int a4, int a5, int a6)
+/*
+ * The "__used" keeps gcc from removing the function symbol
+ * from the kallsyms table.
+ */
+static __used int kprobe_trace_selftest_target(int a1, int a2, int a3,
+ int a4, int a5, int a6)
{
return a1 + a2 + a3 + a4 + a5 + a6;
}
diff --git a/kernel/trace/trace_printk.c b/kernel/trace/trace_printk.c
index dff763b..1f06468 100644
--- a/kernel/trace/trace_printk.c
+++ b/kernel/trace/trace_printk.c
@@ -240,13 +240,10 @@
const char **fmt = v;
int start_index;
- if (!fmt)
- fmt = __start___trace_bprintk_fmt + *pos;
-
start_index = __stop___trace_bprintk_fmt - __start___trace_bprintk_fmt;
if (*pos < start_index)
- return fmt;
+ return __start___trace_bprintk_fmt + *pos;
return find_next_mod_format(start_index, v, fmt, pos);
}
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 41baf02..3f3b681 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -572,7 +572,7 @@
/**
* __bitmap_parselist - convert list format ASCII string to bitmap
- * @bp: read nul-terminated user string from this buffer
+ * @buf: read nul-terminated user string from this buffer
* @buflen: buffer size in bytes. If string is smaller than this
* then it must be terminated with a \0.
* @is_user: location of buffer, 0 indicates kernel space
diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index 9d86e45..a78b7c6 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -198,7 +198,7 @@
* initialized:
*/
if (obj_pool_free > ODEBUG_POOL_SIZE && obj_cache)
- sched = !work_pending(&debug_obj_work);
+ sched = keventd_up() && !work_pending(&debug_obj_work);
hlist_add_head(&obj->node, &obj_pool);
obj_pool_free++;
obj_pool_used--;
diff --git a/lib/kobject.c b/lib/kobject.c
index 82dc34c..640bd98 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -948,14 +948,14 @@
}
-const void *kobj_ns_current(enum kobj_ns_type type)
+void *kobj_ns_grab_current(enum kobj_ns_type type)
{
- const void *ns = NULL;
+ void *ns = NULL;
spin_lock(&kobj_ns_type_lock);
if ((type > KOBJ_NS_TYPE_NONE) && (type < KOBJ_NS_TYPES) &&
kobj_ns_ops_tbl[type])
- ns = kobj_ns_ops_tbl[type]->current_ns();
+ ns = kobj_ns_ops_tbl[type]->grab_current_ns();
spin_unlock(&kobj_ns_type_lock);
return ns;
@@ -987,23 +987,15 @@
return ns;
}
-/*
- * kobj_ns_exit - invalidate a namespace tag
- *
- * @type: the namespace type (i.e. KOBJ_NS_TYPE_NET)
- * @ns: the actual namespace being invalidated
- *
- * This is called when a tag is no longer valid. For instance,
- * when a network namespace exits, it uses this helper to
- * make sure no sb's sysfs_info points to the now-invalidated
- * netns.
- */
-void kobj_ns_exit(enum kobj_ns_type type, const void *ns)
+void kobj_ns_drop(enum kobj_ns_type type, void *ns)
{
- sysfs_exit_ns(type, ns);
+ spin_lock(&kobj_ns_type_lock);
+ if ((type > KOBJ_NS_TYPE_NONE) && (type < KOBJ_NS_TYPES) &&
+ kobj_ns_ops_tbl[type] && kobj_ns_ops_tbl[type]->drop_ns)
+ kobj_ns_ops_tbl[type]->drop_ns(ns);
+ spin_unlock(&kobj_ns_type_lock);
}
-
EXPORT_SYMBOL(kobject_get);
EXPORT_SYMBOL(kobject_put);
EXPORT_SYMBOL(kobject_del);
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 93ca08b..99093b3 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -110,6 +110,11 @@
__setup("swiotlb=", setup_io_tlb_npages);
/* make io_tlb_overflow tunable too? */
+unsigned long swioltb_nr_tbl(void)
+{
+ return io_tlb_nslabs;
+}
+
/* Note that this doesn't work with highmem page */
static dma_addr_t swiotlb_virt_to_bus(struct device *hwdev,
volatile void *address)
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index c112056..4365df3 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -666,6 +666,8 @@
colonpos = i;
}
}
+ if (longest == 1) /* don't compress a single 0 */
+ colonpos = -1;
/* emit address */
for (i = 0; i < range; i++) {
@@ -826,7 +828,7 @@
* IPv4 uses dot-separated decimal with leading 0's (010.123.045.006)
* - '[Ii]4[hnbl]' IPv4 addresses in host, network, big or little endian order
* - 'I6c' for IPv6 addresses printed as specified by
- * http://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-00
+ * http://tools.ietf.org/html/rfc5952
* - 'U' For a 16 byte UUID/GUID, it prints the UUID/GUID in the form
* "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
* Options for %pU are:
diff --git a/mm/compaction.c b/mm/compaction.c
index 021a296..6cc604b 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -144,9 +144,20 @@
int nr_freepages = cc->nr_freepages;
struct list_head *freelist = &cc->freepages;
+ /*
+ * Initialise the free scanner. The starting point is where we last
+ * scanned from (or the end of the zone if starting). The low point
+ * is the end of the pageblock the migration scanner is using.
+ */
pfn = cc->free_pfn;
low_pfn = cc->migrate_pfn + pageblock_nr_pages;
- high_pfn = low_pfn;
+
+ /*
+ * Take care that if the migration scanner is at the end of the zone
+ * that the free scanner does not accidentally move to the next zone
+ * in the next isolation cycle.
+ */
+ high_pfn = min(low_pfn, pfn);
/*
* Isolate free pages until enough are available to migrate the
@@ -240,11 +251,18 @@
return isolated > (inactive + active) / 2;
}
+/* possible outcome of isolate_migratepages */
+typedef enum {
+ ISOLATE_ABORT, /* Abort compaction now */
+ ISOLATE_NONE, /* No pages isolated, continue scanning */
+ ISOLATE_SUCCESS, /* Pages isolated, migrate */
+} isolate_migrate_t;
+
/*
* Isolate all pages that can be migrated from the block pointed to by
* the migrate scanner within compact_control.
*/
-static unsigned long isolate_migratepages(struct zone *zone,
+static isolate_migrate_t isolate_migratepages(struct zone *zone,
struct compact_control *cc)
{
unsigned long low_pfn, end_pfn;
@@ -261,7 +279,7 @@
/* Do not cross the free scanner or scan within a memory hole */
if (end_pfn > cc->free_pfn || !pfn_valid(low_pfn)) {
cc->migrate_pfn = end_pfn;
- return 0;
+ return ISOLATE_NONE;
}
/*
@@ -270,10 +288,14 @@
* delay for some time until fewer pages are isolated
*/
while (unlikely(too_many_isolated(zone))) {
+ /* async migration should just abort */
+ if (!cc->sync)
+ return ISOLATE_ABORT;
+
congestion_wait(BLK_RW_ASYNC, HZ/10);
if (fatal_signal_pending(current))
- return 0;
+ return ISOLATE_ABORT;
}
/* Time to isolate some pages for migration */
@@ -358,7 +380,7 @@
trace_mm_compaction_isolate_migratepages(nr_scanned, nr_isolated);
- return cc->nr_migratepages;
+ return ISOLATE_SUCCESS;
}
/*
@@ -420,13 +442,6 @@
if (cc->free_pfn <= cc->migrate_pfn)
return COMPACT_COMPLETE;
- /* Compaction run is not finished if the watermark is not met */
- watermark = low_wmark_pages(zone);
- watermark += (1 << cc->order);
-
- if (!zone_watermark_ok(zone, cc->order, watermark, 0, 0))
- return COMPACT_CONTINUE;
-
/*
* order == -1 is expected when compacting via
* /proc/sys/vm/compact_memory
@@ -434,6 +449,13 @@
if (cc->order == -1)
return COMPACT_CONTINUE;
+ /* Compaction run is not finished if the watermark is not met */
+ watermark = low_wmark_pages(zone);
+ watermark += (1 << cc->order);
+
+ if (!zone_watermark_ok(zone, cc->order, watermark, 0, 0))
+ return COMPACT_CONTINUE;
+
/* Direct compactor: Is a suitable page free? */
for (order = cc->order; order < MAX_ORDER; order++) {
/* Job done if page is free of the right migratetype */
@@ -461,6 +483,13 @@
unsigned long watermark;
/*
+ * order == -1 is expected when compacting via
+ * /proc/sys/vm/compact_memory
+ */
+ if (order == -1)
+ return COMPACT_CONTINUE;
+
+ /*
* Watermarks for order-0 must be met for compaction. Note the 2UL.
* This is because during migration, copies of pages need to be
* allocated and for a short time, the footprint is higher
@@ -470,17 +499,11 @@
return COMPACT_SKIPPED;
/*
- * order == -1 is expected when compacting via
- * /proc/sys/vm/compact_memory
- */
- if (order == -1)
- return COMPACT_CONTINUE;
-
- /*
* fragmentation index determines if allocation failures are due to
* low memory or external fragmentation
*
- * index of -1 implies allocations might succeed dependingon watermarks
+ * index of -1000 implies allocations might succeed depending on
+ * watermarks
* index towards 0 implies failure is due to lack of memory
* index towards 1000 implies failure is due to fragmentation
*
@@ -490,7 +513,8 @@
if (fragindex >= 0 && fragindex <= sysctl_extfrag_threshold)
return COMPACT_SKIPPED;
- if (fragindex == -1 && zone_watermark_ok(zone, order, watermark, 0, 0))
+ if (fragindex == -1000 && zone_watermark_ok(zone, order, watermark,
+ 0, 0))
return COMPACT_PARTIAL;
return COMPACT_CONTINUE;
@@ -522,8 +546,15 @@
unsigned long nr_migrate, nr_remaining;
int err;
- if (!isolate_migratepages(zone, cc))
+ switch (isolate_migratepages(zone, cc)) {
+ case ISOLATE_ABORT:
+ ret = COMPACT_PARTIAL;
+ goto out;
+ case ISOLATE_NONE:
continue;
+ case ISOLATE_SUCCESS:
+ ;
+ }
nr_migrate = cc->nr_migratepages;
err = migrate_pages(&cc->migratepages, compaction_alloc,
@@ -547,6 +578,7 @@
}
+out:
/* Release free pages and check accounting */
cc->nr_freepages -= release_freepages(&cc->freepages);
VM_BUG_ON(cc->nr_freepages != 0);
diff --git a/mm/filemap.c b/mm/filemap.c
index d7b1057..a8251a8 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2000,7 +2000,7 @@
error = security_inode_killpriv(dentry);
if (!error && killsuid)
error = __remove_suid(dentry, killsuid);
- if (!error)
+ if (!error && (inode->i_sb->s_flags & MS_NOSEC))
inode->i_flags |= S_NOSEC;
return error;
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 615d974..81532f2 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2234,11 +2234,8 @@
while (likely(khugepaged_enabled())) {
#ifndef CONFIG_NUMA
hpage = khugepaged_alloc_hugepage();
- if (unlikely(!hpage)) {
- count_vm_event(THP_COLLAPSE_ALLOC_FAILED);
+ if (unlikely(!hpage))
break;
- }
- count_vm_event(THP_COLLAPSE_ALLOC);
#else
if (IS_ERR(hpage)) {
khugepaged_alloc_sleep();
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 6402458..bfcf153 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1111,6 +1111,14 @@
WARN_ON(page_count(page) != 1);
prep_compound_huge_page(page, h->order);
prep_new_huge_page(h, page, page_to_nid(page));
+ /*
+ * If we had gigantic hugepages allocated at boot time, we need
+ * to restore the 'stolen' pages to totalram_pages in order to
+ * fix confusing memory reports from free(1) and another
+ * side-effects, like CommitLimit going negative.
+ */
+ if (h->order > (MAX_ORDER - 1))
+ totalram_pages += 1 << h->order;
}
}
diff --git a/mm/ksm.c b/mm/ksm.c
index d708b3e..9a68b0c 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -1302,6 +1302,12 @@
slot = list_entry(slot->mm_list.next, struct mm_slot, mm_list);
ksm_scan.mm_slot = slot;
spin_unlock(&ksm_mmlist_lock);
+ /*
+ * Although we tested list_empty() above, a racing __ksm_exit
+ * of the last mm on the list may have removed it since then.
+ */
+ if (slot == &ksm_mm_head)
+ return NULL;
next_mm:
ksm_scan.address = 0;
ksm_scan.rmap_list = &slot->rmap_list;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index bd9052a..e013b8e 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -35,6 +35,7 @@
#include <linux/limits.h>
#include <linux/mutex.h>
#include <linux/rbtree.h>
+#include <linux/shmem_fs.h>
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/swapops.h>
@@ -107,10 +108,12 @@
enum mem_cgroup_events_target {
MEM_CGROUP_TARGET_THRESH,
MEM_CGROUP_TARGET_SOFTLIMIT,
+ MEM_CGROUP_TARGET_NUMAINFO,
MEM_CGROUP_NTARGETS,
};
#define THRESHOLDS_EVENTS_TARGET (128)
#define SOFTLIMIT_EVENTS_TARGET (1024)
+#define NUMAINFO_EVENTS_TARGET (1024)
struct mem_cgroup_stat_cpu {
long count[MEM_CGROUP_STAT_NSTATS];
@@ -236,7 +239,8 @@
int last_scanned_node;
#if MAX_NUMNODES > 1
nodemask_t scan_nodes;
- unsigned long next_scan_node_update;
+ atomic_t numainfo_events;
+ atomic_t numainfo_updating;
#endif
/*
* Should the accounting and control be hierarchical, per subtree?
@@ -359,7 +363,7 @@
static void mem_cgroup_get(struct mem_cgroup *mem);
static void mem_cgroup_put(struct mem_cgroup *mem);
static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem);
-static void drain_all_stock_async(void);
+static void drain_all_stock_async(struct mem_cgroup *mem);
static struct mem_cgroup_per_zone *
mem_cgroup_zoneinfo(struct mem_cgroup *mem, int nid, int zid)
@@ -576,15 +580,6 @@
return val;
}
-static long mem_cgroup_local_usage(struct mem_cgroup *mem)
-{
- long ret;
-
- ret = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_RSS);
- ret += mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_CACHE);
- return ret;
-}
-
static void mem_cgroup_swap_statistics(struct mem_cgroup *mem,
bool charge)
{
@@ -688,6 +683,9 @@
case MEM_CGROUP_TARGET_SOFTLIMIT:
next = val + SOFTLIMIT_EVENTS_TARGET;
break;
+ case MEM_CGROUP_TARGET_NUMAINFO:
+ next = val + NUMAINFO_EVENTS_TARGET;
+ break;
default:
return;
}
@@ -706,11 +704,19 @@
mem_cgroup_threshold(mem);
__mem_cgroup_target_update(mem, MEM_CGROUP_TARGET_THRESH);
if (unlikely(__memcg_event_check(mem,
- MEM_CGROUP_TARGET_SOFTLIMIT))){
+ MEM_CGROUP_TARGET_SOFTLIMIT))) {
mem_cgroup_update_tree(mem, page);
__mem_cgroup_target_update(mem,
- MEM_CGROUP_TARGET_SOFTLIMIT);
+ MEM_CGROUP_TARGET_SOFTLIMIT);
}
+#if MAX_NUMNODES > 1
+ if (unlikely(__memcg_event_check(mem,
+ MEM_CGROUP_TARGET_NUMAINFO))) {
+ atomic_inc(&mem->numainfo_events);
+ __mem_cgroup_target_update(mem,
+ MEM_CGROUP_TARGET_NUMAINFO);
+ }
+#endif
}
}
@@ -735,7 +741,7 @@
struct mem_cgroup, css);
}
-static struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
+struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
{
struct mem_cgroup *mem = NULL;
@@ -1128,7 +1134,6 @@
return MEM_CGROUP_ZSTAT(mz, lru);
}
-#ifdef CONFIG_NUMA
static unsigned long mem_cgroup_node_nr_file_lru_pages(struct mem_cgroup *memcg,
int nid)
{
@@ -1140,6 +1145,17 @@
return ret;
}
+static unsigned long mem_cgroup_node_nr_anon_lru_pages(struct mem_cgroup *memcg,
+ int nid)
+{
+ unsigned long ret;
+
+ ret = mem_cgroup_get_zonestat_node(memcg, nid, LRU_INACTIVE_ANON) +
+ mem_cgroup_get_zonestat_node(memcg, nid, LRU_ACTIVE_ANON);
+ return ret;
+}
+
+#if MAX_NUMNODES > 1
static unsigned long mem_cgroup_nr_file_lru_pages(struct mem_cgroup *memcg)
{
u64 total = 0;
@@ -1151,17 +1167,6 @@
return total;
}
-static unsigned long mem_cgroup_node_nr_anon_lru_pages(struct mem_cgroup *memcg,
- int nid)
-{
- unsigned long ret;
-
- ret = mem_cgroup_get_zonestat_node(memcg, nid, LRU_INACTIVE_ANON) +
- mem_cgroup_get_zonestat_node(memcg, nid, LRU_ACTIVE_ANON);
-
- return ret;
-}
-
static unsigned long mem_cgroup_nr_anon_lru_pages(struct mem_cgroup *memcg)
{
u64 total = 0;
@@ -1558,6 +1563,28 @@
return ret;
}
+/**
+ * test_mem_cgroup_node_reclaimable
+ * @mem: the target memcg
+ * @nid: the node ID to be checked.
+ * @noswap : specify true here if the user wants flle only information.
+ *
+ * This function returns whether the specified memcg contains any
+ * reclaimable pages on a node. Returns true if there are any reclaimable
+ * pages in the node.
+ */
+static bool test_mem_cgroup_node_reclaimable(struct mem_cgroup *mem,
+ int nid, bool noswap)
+{
+ if (mem_cgroup_node_nr_file_lru_pages(mem, nid))
+ return true;
+ if (noswap || !total_swap_pages)
+ return false;
+ if (mem_cgroup_node_nr_anon_lru_pages(mem, nid))
+ return true;
+ return false;
+
+}
#if MAX_NUMNODES > 1
/*
@@ -1569,26 +1596,26 @@
static void mem_cgroup_may_update_nodemask(struct mem_cgroup *mem)
{
int nid;
-
- if (time_after(mem->next_scan_node_update, jiffies))
+ /*
+ * numainfo_events > 0 means there was at least NUMAINFO_EVENTS_TARGET
+ * pagein/pageout changes since the last update.
+ */
+ if (!atomic_read(&mem->numainfo_events))
+ return;
+ if (atomic_inc_return(&mem->numainfo_updating) > 1)
return;
- mem->next_scan_node_update = jiffies + 10*HZ;
/* make a nodemask where this memcg uses memory from */
mem->scan_nodes = node_states[N_HIGH_MEMORY];
for_each_node_mask(nid, node_states[N_HIGH_MEMORY]) {
- if (mem_cgroup_get_zonestat_node(mem, nid, LRU_INACTIVE_FILE) ||
- mem_cgroup_get_zonestat_node(mem, nid, LRU_ACTIVE_FILE))
- continue;
-
- if (total_swap_pages &&
- (mem_cgroup_get_zonestat_node(mem, nid, LRU_INACTIVE_ANON) ||
- mem_cgroup_get_zonestat_node(mem, nid, LRU_ACTIVE_ANON)))
- continue;
- node_clear(nid, mem->scan_nodes);
+ if (!test_mem_cgroup_node_reclaimable(mem, nid, false))
+ node_clear(nid, mem->scan_nodes);
}
+
+ atomic_set(&mem->numainfo_events, 0);
+ atomic_set(&mem->numainfo_updating, 0);
}
/*
@@ -1626,11 +1653,51 @@
return node;
}
+/*
+ * Check all nodes whether it contains reclaimable pages or not.
+ * For quick scan, we make use of scan_nodes. This will allow us to skip
+ * unused nodes. But scan_nodes is lazily updated and may not cotain
+ * enough new information. We need to do double check.
+ */
+bool mem_cgroup_reclaimable(struct mem_cgroup *mem, bool noswap)
+{
+ int nid;
+
+ /*
+ * quick check...making use of scan_node.
+ * We can skip unused nodes.
+ */
+ if (!nodes_empty(mem->scan_nodes)) {
+ for (nid = first_node(mem->scan_nodes);
+ nid < MAX_NUMNODES;
+ nid = next_node(nid, mem->scan_nodes)) {
+
+ if (test_mem_cgroup_node_reclaimable(mem, nid, noswap))
+ return true;
+ }
+ }
+ /*
+ * Check rest of nodes.
+ */
+ for_each_node_state(nid, N_HIGH_MEMORY) {
+ if (node_isset(nid, mem->scan_nodes))
+ continue;
+ if (test_mem_cgroup_node_reclaimable(mem, nid, noswap))
+ return true;
+ }
+ return false;
+}
+
#else
int mem_cgroup_select_victim_node(struct mem_cgroup *mem)
{
return 0;
}
+
+bool mem_cgroup_reclaimable(struct mem_cgroup *mem, bool noswap)
+{
+ return test_mem_cgroup_node_reclaimable(mem, 0, noswap);
+}
#endif
/*
@@ -1663,15 +1730,21 @@
excess = res_counter_soft_limit_excess(&root_mem->res) >> PAGE_SHIFT;
/* If memsw_is_minimum==1, swap-out is of-no-use. */
- if (root_mem->memsw_is_minimum)
+ if (!check_soft && root_mem->memsw_is_minimum)
noswap = true;
while (1) {
victim = mem_cgroup_select_victim(root_mem);
if (victim == root_mem) {
loop++;
- if (loop >= 1)
- drain_all_stock_async();
+ /*
+ * We are not draining per cpu cached charges during
+ * soft limit reclaim because global reclaim doesn't
+ * care about charges. It tries to free some memory and
+ * charges will not give any.
+ */
+ if (!check_soft && loop >= 1)
+ drain_all_stock_async(root_mem);
if (loop >= 2) {
/*
* If we have not been able to reclaim
@@ -1695,7 +1768,7 @@
}
}
}
- if (!mem_cgroup_local_usage(victim)) {
+ if (!mem_cgroup_reclaimable(victim, noswap)) {
/* this cgroup's local usage == 0 */
css_put(&victim->css);
continue;
@@ -1934,9 +2007,11 @@
struct mem_cgroup *cached; /* this never be root cgroup */
unsigned int nr_pages;
struct work_struct work;
+ unsigned long flags;
+#define FLUSHING_CACHED_CHARGE (0)
};
static DEFINE_PER_CPU(struct memcg_stock_pcp, memcg_stock);
-static atomic_t memcg_drain_count;
+static DEFINE_MUTEX(percpu_charge_mutex);
/*
* Try to consume stocked charge on this cpu. If success, one page is consumed
@@ -1984,6 +2059,7 @@
{
struct memcg_stock_pcp *stock = &__get_cpu_var(memcg_stock);
drain_stock(stock);
+ clear_bit(FLUSHING_CACHED_CHARGE, &stock->flags);
}
/*
@@ -2008,26 +2084,45 @@
* expects some charges will be back to res_counter later but cannot wait for
* it.
*/
-static void drain_all_stock_async(void)
+static void drain_all_stock_async(struct mem_cgroup *root_mem)
{
- int cpu;
- /* This function is for scheduling "drain" in asynchronous way.
- * The result of "drain" is not directly handled by callers. Then,
- * if someone is calling drain, we don't have to call drain more.
- * Anyway, WORK_STRUCT_PENDING check in queue_work_on() will catch if
- * there is a race. We just do loose check here.
+ int cpu, curcpu;
+ /*
+ * If someone calls draining, avoid adding more kworker runs.
*/
- if (atomic_read(&memcg_drain_count))
+ if (!mutex_trylock(&percpu_charge_mutex))
return;
/* Notify other cpus that system-wide "drain" is running */
- atomic_inc(&memcg_drain_count);
get_online_cpus();
+ /*
+ * Get a hint for avoiding draining charges on the current cpu,
+ * which must be exhausted by our charging. It is not required that
+ * this be a precise check, so we use raw_smp_processor_id() instead of
+ * getcpu()/putcpu().
+ */
+ curcpu = raw_smp_processor_id();
for_each_online_cpu(cpu) {
struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu);
- schedule_work_on(cpu, &stock->work);
+ struct mem_cgroup *mem;
+
+ if (cpu == curcpu)
+ continue;
+
+ mem = stock->cached;
+ if (!mem)
+ continue;
+ if (mem != root_mem) {
+ if (!root_mem->use_hierarchy)
+ continue;
+ /* check whether "mem" is under tree of "root_mem" */
+ if (!css_is_ancestor(&mem->css, &root_mem->css))
+ continue;
+ }
+ if (!test_and_set_bit(FLUSHING_CACHED_CHARGE, &stock->flags))
+ schedule_work_on(cpu, &stock->work);
}
put_online_cpus();
- atomic_dec(&memcg_drain_count);
+ mutex_unlock(&percpu_charge_mutex);
/* We don't wait for flush_work */
}
@@ -2035,9 +2130,9 @@
static void drain_all_stock_sync(void)
{
/* called when force_empty is called */
- atomic_inc(&memcg_drain_count);
+ mutex_lock(&percpu_charge_mutex);
schedule_on_each_cpu(drain_local_stock);
- atomic_dec(&memcg_drain_count);
+ mutex_unlock(&percpu_charge_mutex);
}
/*
@@ -4640,6 +4735,7 @@
{
.name = "numa_stat",
.open = mem_control_numa_stat_open,
+ .mode = S_IRUGO,
},
#endif
};
@@ -5414,18 +5510,16 @@
struct cgroup *old_cont,
struct task_struct *p)
{
- struct mm_struct *mm;
+ struct mm_struct *mm = get_task_mm(p);
- if (!mc.to)
- /* no need to move charge */
- return;
-
- mm = get_task_mm(p);
if (mm) {
- mem_cgroup_move_charge(mm);
+ if (mc.to)
+ mem_cgroup_move_charge(mm);
+ put_swap_token(mm);
mmput(mm);
}
- mem_cgroup_clear_mc();
+ if (mc.to)
+ mem_cgroup_clear_mc();
}
#else /* !CONFIG_MMU */
static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 5c8f7e0..740c4f5 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -52,6 +52,7 @@
#include <linux/swapops.h>
#include <linux/hugetlb.h>
#include <linux/memory_hotplug.h>
+#include <linux/mm_inline.h>
#include "internal.h"
int sysctl_memory_failure_early_kill __read_mostly = 0;
@@ -390,10 +391,11 @@
struct task_struct *tsk;
struct anon_vma *av;
- read_lock(&tasklist_lock);
av = page_lock_anon_vma(page);
if (av == NULL) /* Not actually mapped anymore */
- goto out;
+ return;
+
+ read_lock(&tasklist_lock);
for_each_process (tsk) {
struct anon_vma_chain *vmac;
@@ -407,9 +409,8 @@
add_to_kill(tsk, page, vma, to_kill, tkc);
}
}
- page_unlock_anon_vma(av);
-out:
read_unlock(&tasklist_lock);
+ page_unlock_anon_vma(av);
}
/*
@@ -423,17 +424,8 @@
struct prio_tree_iter iter;
struct address_space *mapping = page->mapping;
- /*
- * A note on the locking order between the two locks.
- * We don't rely on this particular order.
- * If you have some other code that needs a different order
- * feel free to switch them around. Or add a reverse link
- * from mm_struct to task_struct, then this could be all
- * done without taking tasklist_lock and looping over all tasks.
- */
-
- read_lock(&tasklist_lock);
mutex_lock(&mapping->i_mmap_mutex);
+ read_lock(&tasklist_lock);
for_each_process(tsk) {
pgoff_t pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
@@ -453,8 +445,8 @@
add_to_kill(tsk, page, vma, to_kill, tkc);
}
}
- mutex_unlock(&mapping->i_mmap_mutex);
read_unlock(&tasklist_lock);
+ mutex_unlock(&mapping->i_mmap_mutex);
}
/*
@@ -1468,7 +1460,8 @@
put_page(page);
if (!ret) {
LIST_HEAD(pagelist);
-
+ inc_zone_page_state(page, NR_ISOLATED_ANON +
+ page_is_file_cache(page));
list_add(&page->lru, &pagelist);
ret = migrate_pages(&pagelist, new_page, MPOL_MF_MOVE_ALL,
0, true);
diff --git a/mm/memory.c b/mm/memory.c
index 6953d39..9b8a01d 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -305,6 +305,7 @@
if (batch->nr == batch->max) {
if (!tlb_next_batch(tlb))
return 0;
+ batch = tlb->active;
}
VM_BUG_ON(batch->nr > batch->max);
@@ -1112,11 +1113,13 @@
int force_flush = 0;
int rss[NR_MM_COUNTERS];
spinlock_t *ptl;
+ pte_t *start_pte;
pte_t *pte;
again:
init_rss_vec(rss);
- pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+ start_pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
+ pte = start_pte;
arch_enter_lazy_mmu_mode();
do {
pte_t ptent = *pte;
@@ -1196,7 +1199,7 @@
add_mm_rss_vec(mm, rss);
arch_leave_lazy_mmu_mode();
- pte_unmap_unlock(pte - 1, ptl);
+ pte_unmap_unlock(start_pte, ptl);
/*
* mmu_gather ran out of room to batch pages, we break out of
@@ -1296,7 +1299,7 @@
/**
* unmap_vmas - unmap a range of memory covered by a list of vma's
- * @tlbp: address of the caller's struct mmu_gather
+ * @tlb: address of the caller's struct mmu_gather
* @vma: the starting vma
* @start_addr: virtual address at which to start unmapping
* @end_addr: virtual address at which to end unmapping
@@ -2796,30 +2799,6 @@
}
EXPORT_SYMBOL(unmap_mapping_range);
-int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end)
-{
- struct address_space *mapping = inode->i_mapping;
-
- /*
- * If the underlying filesystem is not going to provide
- * a way to truncate a range of blocks (punch a hole) -
- * we should return failure right now.
- */
- if (!inode->i_op->truncate_range)
- return -ENOSYS;
-
- mutex_lock(&inode->i_mutex);
- down_write(&inode->i_alloc_sem);
- unmap_mapping_range(mapping, offset, (end - offset), 1);
- truncate_inode_pages_range(mapping, offset, end);
- unmap_mapping_range(mapping, offset, (end - offset), 1);
- inode->i_op->truncate_range(inode, offset, end);
- up_write(&inode->i_alloc_sem);
- mutex_unlock(&inode->i_mutex);
-
- return 0;
-}
-
/*
* We enter with non-exclusive mmap_sem (to exclude vma changes,
* but allow concurrent faults), and pte mapped but not yet locked.
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 9f64637..c46887b 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -494,6 +494,14 @@
/* init node's zones as empty zones, we don't have any present pages.*/
free_area_init_node(nid, zones_size, start_pfn, zholes_size);
+ /*
+ * The node we allocated has no zone fallback lists. For avoiding
+ * to access not-initialized zonelist, build here.
+ */
+ mutex_lock(&zonelists_mutex);
+ build_all_zonelists(NULL);
+ mutex_unlock(&zonelists_mutex);
+
return pgdat;
}
@@ -515,7 +523,7 @@
lock_memory_hotplug();
pgdat = hotadd_new_pgdat(nid, 0);
- if (pgdat) {
+ if (!pgdat) {
ret = -ENOMEM;
goto out;
}
diff --git a/mm/migrate.c b/mm/migrate.c
index e4a5c91..666e4e6 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -288,7 +288,7 @@
*/
__dec_zone_page_state(page, NR_FILE_PAGES);
__inc_zone_page_state(newpage, NR_FILE_PAGES);
- if (PageSwapBacked(page)) {
+ if (!PageSwapCache(page) && PageSwapBacked(page)) {
__dec_zone_page_state(page, NR_SHMEM);
__inc_zone_page_state(newpage, NR_SHMEM);
}
diff --git a/mm/mmap.c b/mm/mmap.c
index bbdc9af..d49736f 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -906,14 +906,7 @@
if (anon_vma)
return anon_vma;
try_prev:
- /*
- * It is potentially slow to have to call find_vma_prev here.
- * But it's only on the first write fault on the vma, not
- * every time, and we could devise a way to avoid it later
- * (e.g. stash info in next's anon_vma_node when assigning
- * an anon_vma, or when trying vma_merge). Another time.
- */
- BUG_ON(find_vma_prev(vma->vm_mm, vma->vm_start, &near) != vma);
+ near = vma->vm_prev;
if (!near)
goto none;
@@ -2044,9 +2037,10 @@
return -EINVAL;
/* Find the first overlapping VMA */
- vma = find_vma_prev(mm, start, &prev);
+ vma = find_vma(mm, start);
if (!vma)
return 0;
+ prev = vma->vm_prev;
/* we have start < vma->vm_end */
/* if it doesn't overlap, we have nothing.. */
diff --git a/mm/nommu.c b/mm/nommu.c
index 1fd0c51..9edc897 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -1813,10 +1813,13 @@
return NULL;
}
-int remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
- unsigned long to, unsigned long size, pgprot_t prot)
+int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr,
+ unsigned long pfn, unsigned long size, pgprot_t prot)
{
- vma->vm_start = vma->vm_pgoff << PAGE_SHIFT;
+ if (addr != (pfn << PAGE_SHIFT))
+ return -EINVAL;
+
+ vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
return 0;
}
EXPORT_SYMBOL(remap_pfn_range);
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 74ccff6..53bffc6 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -162,13 +162,13 @@
}
#endif
-static int __meminit init_section_page_cgroup(unsigned long pfn)
+static int __meminit init_section_page_cgroup(unsigned long pfn, int nid)
{
struct page_cgroup *base, *pc;
struct mem_section *section;
unsigned long table_size;
unsigned long nr;
- int nid, index;
+ int index;
nr = pfn_to_section_nr(pfn);
section = __nr_to_section(nr);
@@ -176,7 +176,6 @@
if (section->page_cgroup)
return 0;
- nid = page_to_nid(pfn_to_page(pfn));
table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
base = alloc_page_cgroup(table_size, nid);
@@ -196,7 +195,11 @@
pc = base + index;
init_page_cgroup(pc, nr);
}
-
+ /*
+ * The passed "pfn" may not be aligned to SECTION. For the calculation
+ * we need to apply a mask.
+ */
+ pfn &= PAGE_SECTION_MASK;
section->page_cgroup = base - pfn;
total_usage += table_size;
return 0;
@@ -225,10 +228,20 @@
start = start_pfn & ~(PAGES_PER_SECTION - 1);
end = ALIGN(start_pfn + nr_pages, PAGES_PER_SECTION);
+ if (nid == -1) {
+ /*
+ * In this case, "nid" already exists and contains valid memory.
+ * "start_pfn" passed to us is a pfn which is an arg for
+ * online__pages(), and start_pfn should exist.
+ */
+ nid = pfn_to_nid(start_pfn);
+ VM_BUG_ON(!node_state(nid, N_ONLINE));
+ }
+
for (pfn = start; !fail && pfn < end; pfn += PAGES_PER_SECTION) {
if (!pfn_present(pfn))
continue;
- fail = init_section_page_cgroup(pfn);
+ fail = init_section_page_cgroup(pfn, nid);
}
if (!fail)
return 0;
@@ -284,25 +297,47 @@
void __init page_cgroup_init(void)
{
unsigned long pfn;
- int fail = 0;
+ int nid;
if (mem_cgroup_disabled())
return;
- for (pfn = 0; !fail && pfn < max_pfn; pfn += PAGES_PER_SECTION) {
- if (!pfn_present(pfn))
- continue;
- fail = init_section_page_cgroup(pfn);
+ for_each_node_state(nid, N_HIGH_MEMORY) {
+ unsigned long start_pfn, end_pfn;
+
+ start_pfn = node_start_pfn(nid);
+ end_pfn = node_end_pfn(nid);
+ /*
+ * start_pfn and end_pfn may not be aligned to SECTION and the
+ * page->flags of out of node pages are not initialized. So we
+ * scan [start_pfn, the biggest section's pfn < end_pfn) here.
+ */
+ for (pfn = start_pfn;
+ pfn < end_pfn;
+ pfn = ALIGN(pfn + 1, PAGES_PER_SECTION)) {
+
+ if (!pfn_valid(pfn))
+ continue;
+ /*
+ * Nodes's pfns can be overlapping.
+ * We know some arch can have a nodes layout such as
+ * -------------pfn-------------->
+ * N0 | N1 | N2 | N0 | N1 | N2|....
+ */
+ if (pfn_to_nid(pfn) != nid)
+ continue;
+ if (init_section_page_cgroup(pfn, nid))
+ goto oom;
+ }
}
- if (fail) {
- printk(KERN_CRIT "try 'cgroup_disable=memory' boot option\n");
- panic("Out of memory");
- } else {
- hotplug_memory_notifier(page_cgroup_callback, 0);
- }
+ hotplug_memory_notifier(page_cgroup_callback, 0);
printk(KERN_INFO "allocated %ld bytes of page_cgroup\n", total_usage);
- printk(KERN_INFO "please try 'cgroup_disable=memory' option if you don't"
- " want memory cgroups\n");
+ printk(KERN_INFO "please try 'cgroup_disable=memory' option if you "
+ "don't want memory cgroups\n");
+ return;
+oom:
+ printk(KERN_CRIT "try 'cgroup_disable=memory' boot option\n");
+ panic("Out of memory");
}
void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
diff --git a/mm/rmap.c b/mm/rmap.c
index 0eb463e..23295f65 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -38,9 +38,8 @@
* in arch-dependent flush_dcache_mmap_lock,
* within inode_wb_list_lock in __sync_single_inode)
*
- * (code doesn't rely on that order so it could be switched around)
- * ->tasklist_lock
- * anon_vma->mutex (memory_failure, collect_procs_anon)
+ * anon_vma->mutex,mapping->i_mutex (memory_failure, collect_procs_anon)
+ * ->tasklist_lock
* pte map lock
*/
@@ -112,9 +111,9 @@
kmem_cache_free(anon_vma_cachep, anon_vma);
}
-static inline struct anon_vma_chain *anon_vma_chain_alloc(void)
+static inline struct anon_vma_chain *anon_vma_chain_alloc(gfp_t gfp)
{
- return kmem_cache_alloc(anon_vma_chain_cachep, GFP_KERNEL);
+ return kmem_cache_alloc(anon_vma_chain_cachep, gfp);
}
static void anon_vma_chain_free(struct anon_vma_chain *anon_vma_chain)
@@ -159,7 +158,7 @@
struct mm_struct *mm = vma->vm_mm;
struct anon_vma *allocated;
- avc = anon_vma_chain_alloc();
+ avc = anon_vma_chain_alloc(GFP_KERNEL);
if (!avc)
goto out_enomem;
@@ -200,6 +199,32 @@
return -ENOMEM;
}
+/*
+ * This is a useful helper function for locking the anon_vma root as
+ * we traverse the vma->anon_vma_chain, looping over anon_vma's that
+ * have the same vma.
+ *
+ * Such anon_vma's should have the same root, so you'd expect to see
+ * just a single mutex_lock for the whole traversal.
+ */
+static inline struct anon_vma *lock_anon_vma_root(struct anon_vma *root, struct anon_vma *anon_vma)
+{
+ struct anon_vma *new_root = anon_vma->root;
+ if (new_root != root) {
+ if (WARN_ON_ONCE(root))
+ mutex_unlock(&root->mutex);
+ root = new_root;
+ mutex_lock(&root->mutex);
+ }
+ return root;
+}
+
+static inline void unlock_anon_vma_root(struct anon_vma *root)
+{
+ if (root)
+ mutex_unlock(&root->mutex);
+}
+
static void anon_vma_chain_link(struct vm_area_struct *vma,
struct anon_vma_chain *avc,
struct anon_vma *anon_vma)
@@ -208,13 +233,11 @@
avc->anon_vma = anon_vma;
list_add(&avc->same_vma, &vma->anon_vma_chain);
- anon_vma_lock(anon_vma);
/*
* It's critical to add new vmas to the tail of the anon_vma,
* see comment in huge_memory.c:__split_huge_page().
*/
list_add_tail(&avc->same_anon_vma, &anon_vma->head);
- anon_vma_unlock(anon_vma);
}
/*
@@ -224,13 +247,24 @@
int anon_vma_clone(struct vm_area_struct *dst, struct vm_area_struct *src)
{
struct anon_vma_chain *avc, *pavc;
+ struct anon_vma *root = NULL;
list_for_each_entry_reverse(pavc, &src->anon_vma_chain, same_vma) {
- avc = anon_vma_chain_alloc();
- if (!avc)
- goto enomem_failure;
- anon_vma_chain_link(dst, avc, pavc->anon_vma);
+ struct anon_vma *anon_vma;
+
+ avc = anon_vma_chain_alloc(GFP_NOWAIT | __GFP_NOWARN);
+ if (unlikely(!avc)) {
+ unlock_anon_vma_root(root);
+ root = NULL;
+ avc = anon_vma_chain_alloc(GFP_KERNEL);
+ if (!avc)
+ goto enomem_failure;
+ }
+ anon_vma = pavc->anon_vma;
+ root = lock_anon_vma_root(root, anon_vma);
+ anon_vma_chain_link(dst, avc, anon_vma);
}
+ unlock_anon_vma_root(root);
return 0;
enomem_failure:
@@ -263,7 +297,7 @@
anon_vma = anon_vma_alloc();
if (!anon_vma)
goto out_error;
- avc = anon_vma_chain_alloc();
+ avc = anon_vma_chain_alloc(GFP_KERNEL);
if (!avc)
goto out_error_free_anon_vma;
@@ -280,7 +314,9 @@
get_anon_vma(anon_vma->root);
/* Mark this anon_vma as the one where our new (COWed) pages go. */
vma->anon_vma = anon_vma;
+ anon_vma_lock(anon_vma);
anon_vma_chain_link(vma, avc, anon_vma);
+ anon_vma_unlock(anon_vma);
return 0;
@@ -291,36 +327,43 @@
return -ENOMEM;
}
-static void anon_vma_unlink(struct anon_vma_chain *anon_vma_chain)
-{
- struct anon_vma *anon_vma = anon_vma_chain->anon_vma;
- int empty;
-
- /* If anon_vma_fork fails, we can get an empty anon_vma_chain. */
- if (!anon_vma)
- return;
-
- anon_vma_lock(anon_vma);
- list_del(&anon_vma_chain->same_anon_vma);
-
- /* We must garbage collect the anon_vma if it's empty */
- empty = list_empty(&anon_vma->head);
- anon_vma_unlock(anon_vma);
-
- if (empty)
- put_anon_vma(anon_vma);
-}
-
void unlink_anon_vmas(struct vm_area_struct *vma)
{
struct anon_vma_chain *avc, *next;
+ struct anon_vma *root = NULL;
/*
* Unlink each anon_vma chained to the VMA. This list is ordered
* from newest to oldest, ensuring the root anon_vma gets freed last.
*/
list_for_each_entry_safe(avc, next, &vma->anon_vma_chain, same_vma) {
- anon_vma_unlink(avc);
+ struct anon_vma *anon_vma = avc->anon_vma;
+
+ root = lock_anon_vma_root(root, anon_vma);
+ list_del(&avc->same_anon_vma);
+
+ /*
+ * Leave empty anon_vmas on the list - we'll need
+ * to free them outside the lock.
+ */
+ if (list_empty(&anon_vma->head))
+ continue;
+
+ list_del(&avc->same_vma);
+ anon_vma_chain_free(avc);
+ }
+ unlock_anon_vma_root(root);
+
+ /*
+ * Iterate the list once more, it now only contains empty and unlinked
+ * anon_vmas, destroy them. Could not do before due to __put_anon_vma()
+ * needing to acquire the anon_vma->root->mutex.
+ */
+ list_for_each_entry_safe(avc, next, &vma->anon_vma_chain, same_vma) {
+ struct anon_vma *anon_vma = avc->anon_vma;
+
+ put_anon_vma(anon_vma);
+
list_del(&avc->same_vma);
anon_vma_chain_free(avc);
}
diff --git a/mm/shmem.c b/mm/shmem.c
index d221a1c..fcedf54 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -539,7 +539,7 @@
} while (next);
}
-static void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end)
+void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end)
{
struct shmem_inode_info *info = SHMEM_I(inode);
unsigned long idx;
@@ -562,6 +562,8 @@
spinlock_t *punch_lock;
unsigned long upper_limit;
+ truncate_inode_pages_range(inode->i_mapping, start, end);
+
inode->i_ctime = inode->i_mtime = CURRENT_TIME;
idx = (start + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
if (idx >= info->next_index)
@@ -738,16 +740,8 @@
* lowered next_index. Also, though shmem_getpage checks
* i_size before adding to cache, no recheck after: so fix the
* narrow window there too.
- *
- * Recalling truncate_inode_pages_range and unmap_mapping_range
- * every time for punch_hole (which never got a chance to clear
- * SHMEM_PAGEIN at the start of vmtruncate_range) is expensive,
- * yet hardly ever necessary: try to optimize them out later.
*/
truncate_inode_pages_range(inode->i_mapping, start, end);
- if (punch_hole)
- unmap_mapping_range(inode->i_mapping, start,
- end - start, 1);
}
spin_lock(&info->lock);
@@ -766,22 +760,23 @@
shmem_free_pages(pages_to_free.next);
}
}
+EXPORT_SYMBOL_GPL(shmem_truncate_range);
-static int shmem_notify_change(struct dentry *dentry, struct iattr *attr)
+static int shmem_setattr(struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = dentry->d_inode;
- loff_t newsize = attr->ia_size;
int error;
error = inode_change_ok(inode, attr);
if (error)
return error;
- if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)
- && newsize != inode->i_size) {
+ if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)) {
+ loff_t oldsize = inode->i_size;
+ loff_t newsize = attr->ia_size;
struct page *page = NULL;
- if (newsize < inode->i_size) {
+ if (newsize < oldsize) {
/*
* If truncating down to a partial page, then
* if that page is already allocated, hold it
@@ -810,12 +805,19 @@
spin_unlock(&info->lock);
}
}
-
- /* XXX(truncate): truncate_setsize should be called last */
- truncate_setsize(inode, newsize);
+ if (newsize != oldsize) {
+ i_size_write(inode, newsize);
+ inode->i_ctime = inode->i_mtime = CURRENT_TIME;
+ }
+ if (newsize < oldsize) {
+ loff_t holebegin = round_up(newsize, PAGE_SIZE);
+ unmap_mapping_range(inode->i_mapping, holebegin, 0, 1);
+ shmem_truncate_range(inode, newsize, (loff_t)-1);
+ /* unmap again to remove racily COWed private pages */
+ unmap_mapping_range(inode->i_mapping, holebegin, 0, 1);
+ }
if (page)
page_cache_release(page);
- shmem_truncate_range(inode, newsize, (loff_t)-1);
}
setattr_copy(inode, attr);
@@ -832,7 +834,6 @@
struct shmem_xattr *xattr, *nxattr;
if (inode->i_mapping->a_ops == &shmem_aops) {
- truncate_inode_pages(inode->i_mapping, 0);
shmem_unacct_size(info->flags, inode->i_size);
inode->i_size = 0;
shmem_truncate_range(inode, 0, (loff_t)-1);
@@ -2706,7 +2707,7 @@
};
static const struct inode_operations shmem_inode_operations = {
- .setattr = shmem_notify_change,
+ .setattr = shmem_setattr,
.truncate_range = shmem_truncate_range,
#ifdef CONFIG_TMPFS_XATTR
.setxattr = shmem_setxattr,
@@ -2739,7 +2740,7 @@
.removexattr = shmem_removexattr,
#endif
#ifdef CONFIG_TMPFS_POSIX_ACL
- .setattr = shmem_notify_change,
+ .setattr = shmem_setattr,
.check_acl = generic_check_acl,
#endif
};
@@ -2752,7 +2753,7 @@
.removexattr = shmem_removexattr,
#endif
#ifdef CONFIG_TMPFS_POSIX_ACL
- .setattr = shmem_notify_change,
+ .setattr = shmem_setattr,
.check_acl = generic_check_acl,
#endif
};
@@ -2908,6 +2909,12 @@
return 0;
}
+void shmem_truncate_range(struct inode *inode, loff_t start, loff_t end)
+{
+ truncate_inode_pages_range(inode->i_mapping, start, end);
+}
+EXPORT_SYMBOL_GPL(shmem_truncate_range);
+
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
/**
* mem_cgroup_get_shmem_target - find a page or entry assigned to the shmem file
@@ -3028,3 +3035,26 @@
vma->vm_flags |= VM_CAN_NONLINEAR;
return 0;
}
+
+/**
+ * shmem_read_mapping_page_gfp - read into page cache, using specified page allocation flags.
+ * @mapping: the page's address_space
+ * @index: the page index
+ * @gfp: the page allocator flags to use if allocating
+ *
+ * This behaves as a tmpfs "read_cache_page_gfp(mapping, index, gfp)",
+ * with any new page allocations done using the specified allocation flags.
+ * But read_cache_page_gfp() uses the ->readpage() method: which does not
+ * suit tmpfs, since it may have pages in swapcache, and needs to find those
+ * for itself; although drivers/gpu/drm i915 and ttm rely upon this support.
+ *
+ * Provide a stub for those callers to start using now, then later
+ * flesh it out to call shmem_getpage() with additional gfp mask, when
+ * shmem_file_splice_read() is added and shmem_readpage() is removed.
+ */
+struct page *shmem_read_mapping_page_gfp(struct address_space *mapping,
+ pgoff_t index, gfp_t gfp)
+{
+ return read_cache_page_gfp(mapping, index, gfp);
+}
+EXPORT_SYMBOL_GPL(shmem_read_mapping_page_gfp);
diff --git a/mm/slab.c b/mm/slab.c
index bcfa498..d96e223 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3604,13 +3604,14 @@
* Release an obj back to its cache. If the obj has a constructed state, it must
* be in this state _before_ it is released. Called with disabled ints.
*/
-static inline void __cache_free(struct kmem_cache *cachep, void *objp)
+static inline void __cache_free(struct kmem_cache *cachep, void *objp,
+ void *caller)
{
struct array_cache *ac = cpu_cache_get(cachep);
check_irq_off();
kmemleak_free_recursive(objp, cachep->flags);
- objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
+ objp = cache_free_debugcheck(cachep, objp, caller);
kmemcheck_slab_free(cachep, objp, obj_size(cachep));
@@ -3801,7 +3802,7 @@
debug_check_no_locks_freed(objp, obj_size(cachep));
if (!(cachep->flags & SLAB_DEBUG_OBJECTS))
debug_check_no_obj_freed(objp, obj_size(cachep));
- __cache_free(cachep, objp);
+ __cache_free(cachep, objp, __builtin_return_address(0));
local_irq_restore(flags);
trace_kmem_cache_free(_RET_IP_, objp);
@@ -3831,7 +3832,7 @@
c = virt_to_cache(objp);
debug_check_no_locks_freed(objp, obj_size(c));
debug_check_no_obj_freed(objp, obj_size(c));
- __cache_free(c, (void *)objp);
+ __cache_free(c, (void *)objp, __builtin_return_address(0));
local_irq_restore(flags);
}
EXPORT_SYMBOL(kfree);
diff --git a/mm/slub.c b/mm/slub.c
index 7be0223..35f351f 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2320,16 +2320,12 @@
BUILD_BUG_ON(PERCPU_DYNAMIC_EARLY_SIZE <
SLUB_PAGE_SHIFT * sizeof(struct kmem_cache_cpu));
-#ifdef CONFIG_CMPXCHG_LOCAL
/*
- * Must align to double word boundary for the double cmpxchg instructions
- * to work.
+ * Must align to double word boundary for the double cmpxchg
+ * instructions to work; see __pcpu_double_call_return_bool().
*/
- s->cpu_slab = __alloc_percpu(sizeof(struct kmem_cache_cpu), 2 * sizeof(void *));
-#else
- /* Regular alignment is sufficient */
- s->cpu_slab = alloc_percpu(struct kmem_cache_cpu);
-#endif
+ s->cpu_slab = __alloc_percpu(sizeof(struct kmem_cache_cpu),
+ 2 * sizeof(void *));
if (!s->cpu_slab)
return 0;
diff --git a/mm/swapfile.c b/mm/swapfile.c
index d537d29..ff8dc1a 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -14,7 +14,7 @@
#include <linux/vmalloc.h>
#include <linux/pagemap.h>
#include <linux/namei.h>
-#include <linux/shm.h>
+#include <linux/shmem_fs.h>
#include <linux/blkdev.h>
#include <linux/random.h>
#include <linux/writeback.h>
diff --git a/mm/thrash.c b/mm/thrash.c
index 2372d4e..fabf2d0 100644
--- a/mm/thrash.c
+++ b/mm/thrash.c
@@ -21,14 +21,40 @@
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/swap.h>
+#include <linux/memcontrol.h>
+
+#include <trace/events/vmscan.h>
+
+#define TOKEN_AGING_INTERVAL (0xFF)
static DEFINE_SPINLOCK(swap_token_lock);
struct mm_struct *swap_token_mm;
+struct mem_cgroup *swap_token_memcg;
static unsigned int global_faults;
+static unsigned int last_aging;
+
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+static struct mem_cgroup *swap_token_memcg_from_mm(struct mm_struct *mm)
+{
+ struct mem_cgroup *memcg;
+
+ memcg = try_get_mem_cgroup_from_mm(mm);
+ if (memcg)
+ css_put(mem_cgroup_css(memcg));
+
+ return memcg;
+}
+#else
+static struct mem_cgroup *swap_token_memcg_from_mm(struct mm_struct *mm)
+{
+ return NULL;
+}
+#endif
void grab_swap_token(struct mm_struct *mm)
{
int current_interval;
+ unsigned int old_prio = mm->token_priority;
global_faults++;
@@ -38,40 +64,81 @@
return;
/* First come first served */
- if (swap_token_mm == NULL) {
- mm->token_priority = mm->token_priority + 2;
- swap_token_mm = mm;
- goto out;
+ if (!swap_token_mm)
+ goto replace_token;
+
+ if ((global_faults - last_aging) > TOKEN_AGING_INTERVAL) {
+ swap_token_mm->token_priority /= 2;
+ last_aging = global_faults;
}
- if (mm != swap_token_mm) {
- if (current_interval < mm->last_interval)
- mm->token_priority++;
- else {
- if (likely(mm->token_priority > 0))
- mm->token_priority--;
- }
- /* Check if we deserve the token */
- if (mm->token_priority > swap_token_mm->token_priority) {
- mm->token_priority += 2;
- swap_token_mm = mm;
- }
- } else {
- /* Token holder came in again! */
+ if (mm == swap_token_mm) {
mm->token_priority += 2;
+ goto update_priority;
}
+ if (current_interval < mm->last_interval)
+ mm->token_priority++;
+ else {
+ if (likely(mm->token_priority > 0))
+ mm->token_priority--;
+ }
+
+ /* Check if we deserve the token */
+ if (mm->token_priority > swap_token_mm->token_priority)
+ goto replace_token;
+
+update_priority:
+ trace_update_swap_token_priority(mm, old_prio, swap_token_mm);
+
out:
mm->faultstamp = global_faults;
mm->last_interval = current_interval;
spin_unlock(&swap_token_lock);
+ return;
+
+replace_token:
+ mm->token_priority += 2;
+ trace_replace_swap_token(swap_token_mm, mm);
+ swap_token_mm = mm;
+ swap_token_memcg = swap_token_memcg_from_mm(mm);
+ last_aging = global_faults;
+ goto out;
}
/* Called on process exit. */
void __put_swap_token(struct mm_struct *mm)
{
spin_lock(&swap_token_lock);
- if (likely(mm == swap_token_mm))
+ if (likely(mm == swap_token_mm)) {
+ trace_put_swap_token(swap_token_mm);
swap_token_mm = NULL;
+ swap_token_memcg = NULL;
+ }
spin_unlock(&swap_token_lock);
}
+
+static bool match_memcg(struct mem_cgroup *a, struct mem_cgroup *b)
+{
+ if (!a)
+ return true;
+ if (!b)
+ return true;
+ if (a == b)
+ return true;
+ return false;
+}
+
+void disable_swap_token(struct mem_cgroup *memcg)
+{
+ /* memcg reclaim don't disable unrelated mm token. */
+ if (match_memcg(memcg, swap_token_memcg)) {
+ spin_lock(&swap_token_lock);
+ if (match_memcg(memcg, swap_token_memcg)) {
+ trace_disable_swap_token(swap_token_mm);
+ swap_token_mm = NULL;
+ swap_token_memcg = NULL;
+ }
+ spin_unlock(&swap_token_lock);
+ }
+}
diff --git a/mm/truncate.c b/mm/truncate.c
index 3a29a61..e13f22e 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -304,6 +304,11 @@
* @lstart: offset from which to truncate
*
* Called under (and serialised by) inode->i_mutex.
+ *
+ * Note: When this function returns, there can be a page in the process of
+ * deletion (inside __delete_from_page_cache()) in the specified range. Thus
+ * mapping->nrpages can be non-zero when this function returns even after
+ * truncation of the whole mapping.
*/
void truncate_inode_pages(struct address_space *mapping, loff_t lstart)
{
@@ -603,3 +608,27 @@
return 0;
}
EXPORT_SYMBOL(vmtruncate);
+
+int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end)
+{
+ struct address_space *mapping = inode->i_mapping;
+
+ /*
+ * If the underlying filesystem is not going to provide
+ * a way to truncate a range of blocks (punch a hole) -
+ * we should return failure right now.
+ */
+ if (!inode->i_op->truncate_range)
+ return -ENOSYS;
+
+ mutex_lock(&inode->i_mutex);
+ down_write(&inode->i_alloc_sem);
+ unmap_mapping_range(mapping, offset, (end - offset), 1);
+ inode->i_op->truncate_range(inode, offset, end);
+ /* unmap again to remove racily COWed private pages */
+ unmap_mapping_range(mapping, offset, (end - offset), 1);
+ up_write(&inode->i_alloc_sem);
+ mutex_unlock(&inode->i_mutex);
+
+ return 0;
+}
diff --git a/mm/vmscan.c b/mm/vmscan.c
index faa0a08..d036e59 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1124,8 +1124,20 @@
nr_lumpy_dirty++;
scan++;
} else {
- /* the page is freed already. */
- if (!page_count(cursor_page))
+ /*
+ * Check if the page is freed already.
+ *
+ * We can't use page_count() as that
+ * requires compound_head and we don't
+ * have a pin on the page here. If a
+ * page is tail, we may or may not
+ * have isolated the head, so assume
+ * it's not free, it'd be tricky to
+ * track the head status without a
+ * page pin.
+ */
+ if (!PageTail(cursor_page) &&
+ !atomic_read(&cursor_page->_count))
continue;
break;
}
@@ -1983,14 +1995,13 @@
* If a zone is deemed to be full of pinned pages then just give it a light
* scan then give up on it.
*/
-static unsigned long shrink_zones(int priority, struct zonelist *zonelist,
+static void shrink_zones(int priority, struct zonelist *zonelist,
struct scan_control *sc)
{
struct zoneref *z;
struct zone *zone;
unsigned long nr_soft_reclaimed;
unsigned long nr_soft_scanned;
- unsigned long total_scanned = 0;
for_each_zone_zonelist_nodemask(zone, z, zonelist,
gfp_zone(sc->gfp_mask), sc->nodemask) {
@@ -2005,19 +2016,23 @@
continue;
if (zone->all_unreclaimable && priority != DEF_PRIORITY)
continue; /* Let kswapd poll it */
+ /*
+ * This steals pages from memory cgroups over softlimit
+ * and returns the number of reclaimed pages and
+ * scanned pages. This works for global memory pressure
+ * and balancing, not for a memcg's limit.
+ */
+ nr_soft_scanned = 0;
+ nr_soft_reclaimed = mem_cgroup_soft_limit_reclaim(zone,
+ sc->order, sc->gfp_mask,
+ &nr_soft_scanned);
+ sc->nr_reclaimed += nr_soft_reclaimed;
+ sc->nr_scanned += nr_soft_scanned;
+ /* need some check for avoid more shrink_zone() */
}
- nr_soft_scanned = 0;
- nr_soft_reclaimed = mem_cgroup_soft_limit_reclaim(zone,
- sc->order, sc->gfp_mask,
- &nr_soft_scanned);
- sc->nr_reclaimed += nr_soft_reclaimed;
- total_scanned += nr_soft_scanned;
-
shrink_zone(priority, zone, sc);
}
-
- return total_scanned;
}
static bool zone_reclaimable(struct zone *zone)
@@ -2081,8 +2096,8 @@
for (priority = DEF_PRIORITY; priority >= 0; priority--) {
sc->nr_scanned = 0;
if (!priority)
- disable_swap_token();
- total_scanned += shrink_zones(priority, zonelist, sc);
+ disable_swap_token(sc->mem_cgroup);
+ shrink_zones(priority, zonelist, sc);
/*
* Don't shrink slabs when reclaiming memory from
* over limit cgroups
@@ -2295,7 +2310,8 @@
for (i = 0; i <= classzone_idx; i++)
present_pages += pgdat->node_zones[i].present_pages;
- return balanced_pages > (present_pages >> 2);
+ /* A special case here: if zone has no page, we think it's balanced */
+ return balanced_pages >= (present_pages >> 2);
}
/* is kswapd sleeping prematurely? */
@@ -2311,7 +2327,7 @@
return true;
/* Check the watermark levels */
- for (i = 0; i < pgdat->nr_zones; i++) {
+ for (i = 0; i <= classzone_idx; i++) {
struct zone *zone = pgdat->node_zones + i;
if (!populated_zone(zone))
@@ -2329,7 +2345,7 @@
}
if (!zone_watermark_ok_safe(zone, order, high_wmark_pages(zone),
- classzone_idx, 0))
+ i, 0))
all_zones_ok = false;
else
balanced += zone->present_pages;
@@ -2407,7 +2423,7 @@
/* The swap token gets in the way of swapout... */
if (!priority)
- disable_swap_token();
+ disable_swap_token(NULL);
all_zones_ok = 1;
balanced = 0;
@@ -2436,7 +2452,6 @@
if (!zone_watermark_ok_safe(zone, order,
high_wmark_pages(zone), 0, 0)) {
end_zone = i;
- *classzone_idx = i;
break;
}
}
@@ -2495,18 +2510,18 @@
KSWAPD_ZONE_BALANCE_GAP_RATIO);
if (!zone_watermark_ok_safe(zone, order,
high_wmark_pages(zone) + balance_gap,
- end_zone, 0))
+ end_zone, 0)) {
shrink_zone(priority, zone, &sc);
- reclaim_state->reclaimed_slab = 0;
- nr_slab = shrink_slab(&shrink, sc.nr_scanned, lru_pages);
- sc.nr_reclaimed += reclaim_state->reclaimed_slab;
- total_scanned += sc.nr_scanned;
- if (zone->all_unreclaimable)
- continue;
- if (nr_slab == 0 &&
- !zone_reclaimable(zone))
- zone->all_unreclaimable = 1;
+ reclaim_state->reclaimed_slab = 0;
+ nr_slab = shrink_slab(&shrink, sc.nr_scanned, lru_pages);
+ sc.nr_reclaimed += reclaim_state->reclaimed_slab;
+ total_scanned += sc.nr_scanned;
+
+ if (nr_slab == 0 && !zone_reclaimable(zone))
+ zone->all_unreclaimable = 1;
+ }
+
/*
* If we've done a decent amount of scanning and
* the reclaim ratio is low, start doing writepage
@@ -2516,6 +2531,12 @@
total_scanned > sc.nr_reclaimed + sc.nr_reclaimed / 2)
sc.may_writepage = 1;
+ if (zone->all_unreclaimable) {
+ if (end_zone && end_zone == i)
+ end_zone--;
+ continue;
+ }
+
if (!zone_watermark_ok_safe(zone, order,
high_wmark_pages(zone), end_zone, 0)) {
all_zones_ok = 0;
@@ -2694,8 +2715,8 @@
*/
static int kswapd(void *p)
{
- unsigned long order;
- int classzone_idx;
+ unsigned long order, new_order;
+ int classzone_idx, new_classzone_idx;
pg_data_t *pgdat = (pg_data_t*)p;
struct task_struct *tsk = current;
@@ -2725,17 +2746,23 @@
tsk->flags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD;
set_freezable();
- order = 0;
- classzone_idx = MAX_NR_ZONES - 1;
+ order = new_order = 0;
+ classzone_idx = new_classzone_idx = pgdat->nr_zones - 1;
for ( ; ; ) {
- unsigned long new_order;
- int new_classzone_idx;
int ret;
- new_order = pgdat->kswapd_max_order;
- new_classzone_idx = pgdat->classzone_idx;
- pgdat->kswapd_max_order = 0;
- pgdat->classzone_idx = MAX_NR_ZONES - 1;
+ /*
+ * If the last balance_pgdat was unsuccessful it's unlikely a
+ * new request of a similar or harder type will succeed soon
+ * so consider going to sleep on the basis we reclaimed at
+ */
+ if (classzone_idx >= new_classzone_idx && order == new_order) {
+ new_order = pgdat->kswapd_max_order;
+ new_classzone_idx = pgdat->classzone_idx;
+ pgdat->kswapd_max_order = 0;
+ pgdat->classzone_idx = pgdat->nr_zones - 1;
+ }
+
if (order < new_order || classzone_idx > new_classzone_idx) {
/*
* Don't sleep if someone wants a larger 'order'
@@ -2748,7 +2775,7 @@
order = pgdat->kswapd_max_order;
classzone_idx = pgdat->classzone_idx;
pgdat->kswapd_max_order = 0;
- pgdat->classzone_idx = MAX_NR_ZONES - 1;
+ pgdat->classzone_idx = pgdat->nr_zones - 1;
}
ret = try_to_freeze();
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index c7a581a..917ecb9 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -205,7 +205,7 @@
grp->nr_vlans++;
if (ngrp) {
- if (ops->ndo_vlan_rx_register)
+ if (ops->ndo_vlan_rx_register && (real_dev->features & NETIF_F_HW_VLAN_RX))
ops->ndo_vlan_rx_register(real_dev, ngrp);
rcu_assign_pointer(real_dev->vlgrp, ngrp);
}
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index 41495dc2..fcc6846 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -23,6 +23,31 @@
return false;
skb->dev = vlan_dev;
+ if (skb->pkt_type == PACKET_OTHERHOST) {
+ /* Our lower layer thinks this is not local, let's make sure.
+ * This allows the VLAN to have a different MAC than the
+ * underlying device, and still route correctly. */
+ if (!compare_ether_addr(eth_hdr(skb)->h_dest,
+ vlan_dev->dev_addr))
+ skb->pkt_type = PACKET_HOST;
+ }
+
+ if (!(vlan_dev_info(vlan_dev)->flags & VLAN_FLAG_REORDER_HDR)) {
+ unsigned int offset = skb->data - skb_mac_header(skb);
+
+ /*
+ * vlan_insert_tag expect skb->data pointing to mac header.
+ * So change skb->data before calling it and change back to
+ * original position later
+ */
+ skb_push(skb, offset);
+ skb = *skbp = vlan_insert_tag(skb, skb->vlan_tci);
+ if (!skb)
+ return false;
+ skb_pull(skb, offset + VLAN_HLEN);
+ skb_reset_mac_len(skb);
+ }
+
skb->priority = vlan_get_ingress_priority(vlan_dev, skb->vlan_tci);
skb->vlan_tci = 0;
@@ -31,22 +56,8 @@
u64_stats_update_begin(&rx_stats->syncp);
rx_stats->rx_packets++;
rx_stats->rx_bytes += skb->len;
-
- switch (skb->pkt_type) {
- case PACKET_BROADCAST:
- break;
- case PACKET_MULTICAST:
+ if (skb->pkt_type == PACKET_MULTICAST)
rx_stats->rx_multicast++;
- break;
- case PACKET_OTHERHOST:
- /* Our lower layer thinks this is not local, let's make sure.
- * This allows the VLAN to have a different MAC than the
- * underlying device, and still route correctly. */
- if (!compare_ether_addr(eth_hdr(skb)->h_dest,
- vlan_dev->dev_addr))
- skb->pkt_type = PACKET_HOST;
- break;
- }
u64_stats_update_end(&rx_stats->syncp);
return true;
@@ -89,18 +100,13 @@
}
EXPORT_SYMBOL(vlan_gro_frags);
-static struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
+static struct sk_buff *vlan_reorder_header(struct sk_buff *skb)
{
- if (vlan_dev_info(skb->dev)->flags & VLAN_FLAG_REORDER_HDR) {
- if (skb_cow(skb, skb_headroom(skb)) < 0)
- skb = NULL;
- if (skb) {
- /* Lifted from Gleb's VLAN code... */
- memmove(skb->data - ETH_HLEN,
- skb->data - VLAN_ETH_HLEN, 12);
- skb->mac_header += VLAN_HLEN;
- }
- }
+ if (skb_cow(skb, skb_headroom(skb)) < 0)
+ return NULL;
+ memmove(skb->data - ETH_HLEN, skb->data - VLAN_ETH_HLEN, 2 * ETH_ALEN);
+ skb->mac_header += VLAN_HLEN;
+ skb_reset_mac_len(skb);
return skb;
}
@@ -161,7 +167,7 @@
skb_pull_rcsum(skb, VLAN_HLEN);
vlan_set_encap_proto(skb, vhdr);
- skb = vlan_check_reorder_header(skb);
+ skb = vlan_reorder_header(skb);
if (unlikely(!skb))
goto err_free;
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 7ea5cf9..6e82148 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -528,7 +528,11 @@
(1<<__LINK_STATE_DORMANT))) |
(1<<__LINK_STATE_PRESENT);
- dev->hw_features = NETIF_F_ALL_TX_OFFLOADS;
+ dev->hw_features = NETIF_F_ALL_CSUM | NETIF_F_SG |
+ NETIF_F_FRAGLIST | NETIF_F_ALL_TSO |
+ NETIF_F_HIGHDMA | NETIF_F_SCTP_CSUM |
+ NETIF_F_ALL_FCOE;
+
dev->features |= real_dev->vlan_features | NETIF_F_LLTX;
dev->gso_max_size = real_dev->gso_max_size;
@@ -586,9 +590,14 @@
static u32 vlan_dev_fix_features(struct net_device *dev, u32 features)
{
struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
+ u32 old_features = features;
features &= real_dev->features;
features &= real_dev->vlan_features;
+
+ if (old_features & NETIF_F_SOFT_FEATURES)
+ features |= old_features & NETIF_F_SOFT_FEATURES;
+
if (dev_ethtool_get_rx_csum(real_dev))
features |= NETIF_F_RXCSUM;
features |= NETIF_F_LLTX;
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 3163330..bcd158f 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -393,6 +393,9 @@
hci_dev_put(hdev);
+ if (conn->handle == 0)
+ kfree(conn);
+
return 0;
}
@@ -608,11 +611,11 @@
goto encrypt;
auth:
- if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
+ if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
return 0;
- hci_conn_auth(conn, sec_level, auth_type);
- return 0;
+ if (!hci_conn_auth(conn, sec_level, auth_type))
+ return 0;
encrypt:
if (conn->link_mode & HCI_LM_ENCRYPT)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index f13ddbf..77930aa 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -477,14 +477,16 @@
* command otherwise */
u8 events[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 };
- /* Events for 1.2 and newer controllers */
- if (hdev->lmp_ver > 1) {
- events[4] |= 0x01; /* Flow Specification Complete */
- events[4] |= 0x02; /* Inquiry Result with RSSI */
- events[4] |= 0x04; /* Read Remote Extended Features Complete */
- events[5] |= 0x08; /* Synchronous Connection Complete */
- events[5] |= 0x10; /* Synchronous Connection Changed */
- }
+ /* CSR 1.1 dongles does not accept any bitfield so don't try to set
+ * any event mask for pre 1.2 devices */
+ if (hdev->lmp_ver <= 1)
+ return;
+
+ events[4] |= 0x01; /* Flow Specification Complete */
+ events[4] |= 0x02; /* Inquiry Result with RSSI */
+ events[4] |= 0x04; /* Read Remote Extended Features Complete */
+ events[5] |= 0x08; /* Synchronous Connection Complete */
+ events[5] |= 0x10; /* Synchronous Connection Changed */
if (hdev->features[3] & LMP_RSSI_INQ)
events[4] |= 0x04; /* Inquiry Result with RSSI */
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index c405a95..43b4c2d 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -464,7 +464,8 @@
{
struct hidp_session *session = (struct hidp_session *) arg;
- kthread_stop(session->task);
+ atomic_inc(&session->terminate);
+ wake_up_process(session->task);
}
static void hidp_set_timer(struct hidp_session *session)
@@ -535,7 +536,8 @@
skb_queue_purge(&session->ctrl_transmit);
skb_queue_purge(&session->intr_transmit);
- kthread_stop(session->task);
+ atomic_inc(&session->terminate);
+ wake_up_process(current);
}
}
@@ -706,9 +708,8 @@
add_wait_queue(sk_sleep(intr_sk), &intr_wait);
session->waiting_for_startup = 0;
wake_up_interruptible(&session->startup_queue);
- while (!kthread_should_stop()) {
- set_current_state(TASK_INTERRUPTIBLE);
-
+ set_current_state(TASK_INTERRUPTIBLE);
+ while (!atomic_read(&session->terminate)) {
if (ctrl_sk->sk_state != BT_CONNECTED ||
intr_sk->sk_state != BT_CONNECTED)
break;
@@ -726,6 +727,7 @@
hidp_process_transmit(session);
schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(sk_sleep(intr_sk), &intr_wait);
@@ -1060,7 +1062,8 @@
err_add_device:
hid_destroy_device(session->hid);
session->hid = NULL;
- kthread_stop(session->task);
+ atomic_inc(&session->terminate);
+ wake_up_process(session->task);
unlink:
hidp_del_timer(session);
@@ -1111,7 +1114,8 @@
skb_queue_purge(&session->ctrl_transmit);
skb_queue_purge(&session->intr_transmit);
- kthread_stop(session->task);
+ atomic_inc(&session->terminate);
+ wake_up_process(session->task);
}
} else
err = -ENOENT;
diff --git a/net/bluetooth/hidp/hidp.h b/net/bluetooth/hidp/hidp.h
index 19e9500..af1bcc8 100644
--- a/net/bluetooth/hidp/hidp.h
+++ b/net/bluetooth/hidp/hidp.h
@@ -142,6 +142,7 @@
uint ctrl_mtu;
uint intr_mtu;
+ atomic_t terminate;
struct task_struct *task;
unsigned char keys[8];
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index e64a1c2..7705e26 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -620,7 +620,8 @@
struct sock *parent = bt_sk(sk)->parent;
rsp.result = cpu_to_le16(L2CAP_CR_PEND);
rsp.status = cpu_to_le16(L2CAP_CS_AUTHOR_PEND);
- parent->sk_data_ready(parent, 0);
+ if (parent)
+ parent->sk_data_ready(parent, 0);
} else {
sk->sk_state = BT_CONFIG;
@@ -2323,7 +2324,7 @@
sk = chan->sk;
- if (sk->sk_state != BT_CONFIG) {
+ if (sk->sk_state != BT_CONFIG && sk->sk_state != BT_CONNECT2) {
struct l2cap_cmd_rej rej;
rej.reason = cpu_to_le16(0x0002);
@@ -2334,7 +2335,7 @@
/* Reject if config buffer is too small. */
len = cmd_len - sizeof(*req);
- if (chan->conf_len + len > sizeof(chan->conf_req)) {
+ if (len < 0 || chan->conf_len + len > sizeof(chan->conf_req)) {
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP,
l2cap_build_conf_rsp(chan, rsp,
L2CAP_CONF_REJECT, flags), rsp);
@@ -4002,21 +4003,31 @@
}
} else if (sk->sk_state == BT_CONNECT2) {
struct l2cap_conn_rsp rsp;
- __u16 result;
+ __u16 res, stat;
if (!status) {
- sk->sk_state = BT_CONFIG;
- result = L2CAP_CR_SUCCESS;
+ if (bt_sk(sk)->defer_setup) {
+ struct sock *parent = bt_sk(sk)->parent;
+ res = L2CAP_CR_PEND;
+ stat = L2CAP_CS_AUTHOR_PEND;
+ if (parent)
+ parent->sk_data_ready(parent, 0);
+ } else {
+ sk->sk_state = BT_CONFIG;
+ res = L2CAP_CR_SUCCESS;
+ stat = L2CAP_CS_NO_INFO;
+ }
} else {
sk->sk_state = BT_DISCONN;
l2cap_sock_set_timer(sk, HZ / 10);
- result = L2CAP_CR_SEC_BLOCK;
+ res = L2CAP_CR_SEC_BLOCK;
+ stat = L2CAP_CS_NO_INFO;
}
rsp.scid = cpu_to_le16(chan->dcid);
rsp.dcid = cpu_to_le16(chan->scid);
- rsp.result = cpu_to_le16(result);
- rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
+ rsp.result = cpu_to_le16(res);
+ rsp.status = cpu_to_le16(stat);
l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_RSP,
sizeof(rsp), &rsp);
}
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 18dc988..8248303 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -413,6 +413,7 @@
break;
}
+ memset(&cinfo, 0, sizeof(cinfo));
cinfo.hci_handle = chan->conn->hcon->handle;
memcpy(cinfo.dev_class, chan->conn->hcon->dev_class, 3);
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 386cfaf..1b10727 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -788,6 +788,7 @@
l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk;
+ memset(&cinfo, 0, sizeof(cinfo));
cinfo.hci_handle = conn->hcon->handle;
memcpy(cinfo.dev_class, conn->hcon->dev_class, 3);
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 42fdffd..cb4fb78 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -369,6 +369,15 @@
case BT_CONNECTED:
case BT_CONFIG:
+ if (sco_pi(sk)->conn) {
+ sk->sk_state = BT_DISCONN;
+ sco_sock_set_timer(sk, SCO_DISCONN_TIMEOUT);
+ hci_conn_put(sco_pi(sk)->conn->hcon);
+ sco_pi(sk)->conn->hcon = NULL;
+ } else
+ sco_chan_del(sk, ECONNRESET);
+ break;
+
case BT_CONNECT:
case BT_DISCONN:
sco_chan_del(sk, ECONNRESET);
@@ -819,7 +828,9 @@
conn->sk = NULL;
sco_pi(sk)->conn = NULL;
sco_conn_unlock(conn);
- hci_conn_put(conn->hcon);
+
+ if (conn->hcon)
+ hci_conn_put(conn->hcon);
}
sk->sk_state = BT_CLOSED;
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index a6b2f86..32b8f9f 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -49,7 +49,9 @@
skb_pull(skb, ETH_HLEN);
rcu_read_lock();
- if (is_multicast_ether_addr(dest)) {
+ if (is_broadcast_ether_addr(dest))
+ br_flood_deliver(br, skb);
+ else if (is_multicast_ether_addr(dest)) {
if (unlikely(netpoll_tx_running(dev))) {
br_flood_deliver(br, skb);
goto out;
@@ -243,6 +245,7 @@
goto out;
np->dev = p->dev;
+ strlcpy(np->dev_name, p->dev->name, IFNAMSIZ);
err = __netpoll_setup(np);
if (err) {
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index f3ac1e8..f06ee39 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -60,7 +60,7 @@
br = p->br;
br_fdb_update(br, p, eth_hdr(skb)->h_source);
- if (is_multicast_ether_addr(dest) &&
+ if (!is_broadcast_ether_addr(dest) && is_multicast_ether_addr(dest) &&
br_multicast_rcv(br, p, skb))
goto drop;
@@ -77,7 +77,9 @@
dst = NULL;
- if (is_multicast_ether_addr(dest)) {
+ if (is_broadcast_ether_addr(dest))
+ skb2 = skb;
+ else if (is_multicast_ether_addr(dest)) {
mdst = br_mdb_get(br, skb);
if (mdst || BR_INPUT_SKB_CB_MROUTERS_ONLY(skb)) {
if ((mdst && mdst->mglist) ||
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 2f14eaf..2d85ca7 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1379,8 +1379,11 @@
if (unlikely(ip_fast_csum((u8 *)iph, iph->ihl)))
return -EINVAL;
- if (iph->protocol != IPPROTO_IGMP)
+ if (iph->protocol != IPPROTO_IGMP) {
+ if ((iph->daddr & IGMP_LOCAL_GROUP_MASK) != IGMP_LOCAL_GROUP)
+ BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
return 0;
+ }
len = ntohs(iph->tot_len);
if (skb->len < len || len < ip_hdrlen(skb))
@@ -1424,7 +1427,7 @@
switch (ih->type) {
case IGMP_HOST_MEMBERSHIP_REPORT:
case IGMPV2_HOST_MEMBERSHIP_REPORT:
- BR_INPUT_SKB_CB(skb2)->mrouters_only = 1;
+ BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
err = br_ip4_multicast_add_group(br, port, ih->group);
break;
case IGMPV3_HOST_MEMBERSHIP_REPORT:
@@ -1543,7 +1546,7 @@
goto out;
}
mld = (struct mld_msg *)skb_transport_header(skb2);
- BR_INPUT_SKB_CB(skb2)->mrouters_only = 1;
+ BR_INPUT_SKB_CB(skb)->mrouters_only = 1;
err = br_ip6_multicast_add_group(br, port, &mld->mld_mca);
break;
}
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index 3fa1231..56149ec 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -104,10 +104,16 @@
{
}
+static u32 *fake_cow_metrics(struct dst_entry *dst, unsigned long old)
+{
+ return NULL;
+}
+
static struct dst_ops fake_dst_ops = {
.family = AF_INET,
.protocol = cpu_to_be16(ETH_P_IP),
.update_pmtu = fake_update_pmtu,
+ .cow_metrics = fake_cow_metrics,
};
/*
diff --git a/net/caif/cfmuxl.c b/net/caif/cfmuxl.c
index 3a66b8c..c23979e 100644
--- a/net/caif/cfmuxl.c
+++ b/net/caif/cfmuxl.c
@@ -255,7 +255,7 @@
if (cfsrvl_phyid_match(layer, phyid) && layer->ctrlcmd) {
- if ((ctrl == _CAIF_CTRLCMD_PHYIF_FLOW_OFF_IND ||
+ if ((ctrl == _CAIF_CTRLCMD_PHYIF_DOWN_IND ||
ctrl == CAIF_CTRLCMD_REMOTE_SHUTDOWN_IND) &&
layer->id != 0) {
diff --git a/net/ceph/ceph_fs.c b/net/ceph/ceph_fs.c
index a3a3a31..41466cc 100644
--- a/net/ceph/ceph_fs.c
+++ b/net/ceph/ceph_fs.c
@@ -36,16 +36,19 @@
if ((flags & O_DIRECTORY) == O_DIRECTORY)
return CEPH_FILE_MODE_PIN;
#endif
- if ((flags & O_APPEND) == O_APPEND)
- flags |= O_WRONLY;
- if ((flags & O_ACCMODE) == O_RDWR)
- mode = CEPH_FILE_MODE_RDWR;
- else if ((flags & O_ACCMODE) == O_WRONLY)
+ switch (flags & O_ACCMODE) {
+ case O_WRONLY:
mode = CEPH_FILE_MODE_WR;
- else
+ break;
+ case O_RDONLY:
mode = CEPH_FILE_MODE_RD;
-
+ break;
+ case O_RDWR:
+ case O_ACCMODE: /* this is what the VFS does */
+ mode = CEPH_FILE_MODE_RDWR;
+ break;
+ }
#ifdef O_LAZY
if (flags & O_LAZY)
mode |= CEPH_FILE_MODE_LAZY;
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 6ea2b89..7330c27 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -477,8 +477,9 @@
calc_layout(osdc, vino, layout, off, plen, req, ops);
req->r_file_layout = *layout; /* keep a copy */
- /* in case it differs from natural alignment that calc_layout
- filled in for us */
+ /* in case it differs from natural (file) alignment that
+ calc_layout filled in for us */
+ req->r_num_pages = calc_pages_for(page_align, *plen);
req->r_page_alignment = page_align;
ceph_osdc_build_request(req, off, plen, ops,
@@ -1144,6 +1145,13 @@
round_jiffies_relative(delay));
}
+static void complete_request(struct ceph_osd_request *req)
+{
+ if (req->r_safe_callback)
+ req->r_safe_callback(req, NULL);
+ complete_all(&req->r_safe_completion); /* fsync waiter */
+}
+
/*
* handle osd op reply. either call the callback if it is specified,
* or do the completion to wake up the waiting thread.
@@ -1226,11 +1234,8 @@
else
complete_all(&req->r_completion);
- if (flags & CEPH_OSD_FLAG_ONDISK) {
- if (req->r_safe_callback)
- req->r_safe_callback(req, msg);
- complete_all(&req->r_safe_completion); /* fsync waiter */
- }
+ if (flags & CEPH_OSD_FLAG_ONDISK)
+ complete_request(req);
done:
dout("req=%p req->r_linger=%d\n", req, req->r_linger);
@@ -1732,6 +1737,7 @@
__cancel_request(req);
__unregister_request(osdc, req);
mutex_unlock(&osdc->request_mutex);
+ complete_request(req);
dout("wait_request tid %llu canceled/timed out\n", req->r_tid);
return rc;
}
@@ -2022,8 +2028,9 @@
int want = calc_pages_for(req->r_page_alignment, data_len);
if (unlikely(req->r_num_pages < want)) {
- pr_warning("tid %lld reply %d > expected %d pages\n",
- tid, want, m->nr_pages);
+ pr_warning("tid %lld reply has %d bytes %d pages, we"
+ " had only %d pages ready\n", tid, data_len,
+ want, req->r_num_pages);
*skip = 1;
ceph_msg_put(m);
m = NULL;
diff --git a/net/core/dev.c b/net/core/dev.c
index 9393078..9c58c1e 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3114,7 +3114,7 @@
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
- skb->mac_len = skb->network_header - skb->mac_header;
+ skb_reset_mac_len(skb);
pt_prev = NULL;
@@ -6178,6 +6178,11 @@
oldsd->output_queue = NULL;
oldsd->output_queue_tailp = &oldsd->output_queue;
}
+ /* Append NAPI poll list from offline CPU. */
+ if (!list_empty(&oldsd->poll_list)) {
+ list_splice_init(&oldsd->poll_list, &sd->poll_list);
+ raise_softirq_irqoff(NET_RX_SOFTIRQ);
+ }
raise_softirq_irqoff(NET_TX_SOFTIRQ);
local_irq_enable();
@@ -6264,29 +6269,23 @@
/**
* netdev_drivername - network driver for the device
* @dev: network device
- * @buffer: buffer for resulting name
- * @len: size of buffer
*
* Determine network driver for device.
*/
-char *netdev_drivername(const struct net_device *dev, char *buffer, int len)
+const char *netdev_drivername(const struct net_device *dev)
{
const struct device_driver *driver;
const struct device *parent;
-
- if (len <= 0 || !buffer)
- return buffer;
- buffer[0] = 0;
+ const char *empty = "";
parent = dev->dev.parent;
-
if (!parent)
- return buffer;
+ return empty;
driver = parent->driver;
if (driver && driver->name)
- strlcpy(buffer, driver->name, len);
- return buffer;
+ return driver->name;
+ return empty;
}
static int __netdev_printk(const char *level, const struct net_device *dev,
diff --git a/net/core/dst.c b/net/core/dst.c
index 9ccca03..6135f36 100644
--- a/net/core/dst.c
+++ b/net/core/dst.c
@@ -190,7 +190,8 @@
dst->lastuse = jiffies;
dst->flags = flags;
dst->next = NULL;
- dst_entries_add(ops, 1);
+ if (!(flags & DST_NOCOUNT))
+ dst_entries_add(ops, 1);
return dst;
}
EXPORT_SYMBOL(dst_alloc);
@@ -243,7 +244,8 @@
neigh_release(neigh);
}
- dst_entries_add(dst->ops, -1);
+ if (!(dst->flags & DST_NOCOUNT))
+ dst_entries_add(dst->ops, -1);
if (dst->ops->destroy)
dst->ops->destroy(dst);
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 11b98bc..33d2a1f 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1179,9 +1179,14 @@
#endif
}
-static const void *net_current_ns(void)
+static void *net_grab_current_ns(void)
{
- return current->nsproxy->net_ns;
+ struct net *ns = current->nsproxy->net_ns;
+#ifdef CONFIG_NET_NS
+ if (ns)
+ atomic_inc(&ns->passive);
+#endif
+ return ns;
}
static const void *net_initial_ns(void)
@@ -1196,22 +1201,13 @@
struct kobj_ns_type_operations net_ns_type_operations = {
.type = KOBJ_NS_TYPE_NET,
- .current_ns = net_current_ns,
+ .grab_current_ns = net_grab_current_ns,
.netlink_ns = net_netlink_ns,
.initial_ns = net_initial_ns,
+ .drop_ns = net_drop_ns,
};
EXPORT_SYMBOL_GPL(net_ns_type_operations);
-static void net_kobj_ns_exit(struct net *net)
-{
- kobj_ns_exit(KOBJ_NS_TYPE_NET, net);
-}
-
-static struct pernet_operations kobj_net_ops = {
- .exit = net_kobj_ns_exit,
-};
-
-
#ifdef CONFIG_HOTPLUG
static int netdev_uevent(struct device *d, struct kobj_uevent_env *env)
{
@@ -1339,6 +1335,5 @@
int netdev_kobject_init(void)
{
kobj_ns_type_register(&net_ns_type_operations);
- register_pernet_subsys(&kobj_net_ops);
return class_register(&net_class);
}
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 6c6b86d..ea489db 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -128,6 +128,7 @@
LIST_HEAD(net_exit_list);
atomic_set(&net->count, 1);
+ atomic_set(&net->passive, 1);
#ifdef NETNS_REFCNT_DEBUG
atomic_set(&net->use_count, 0);
@@ -210,6 +211,13 @@
kmem_cache_free(net_cachep, net);
}
+void net_drop_ns(void *p)
+{
+ struct net *ns = p;
+ if (ns && atomic_dec_and_test(&ns->passive))
+ net_free(ns);
+}
+
struct net *copy_net_ns(unsigned long flags, struct net *old_net)
{
struct net *net;
@@ -230,7 +238,7 @@
}
mutex_unlock(&net_mutex);
if (rv < 0) {
- net_free(net);
+ net_drop_ns(net);
return ERR_PTR(rv);
}
return net;
@@ -286,7 +294,7 @@
/* Finally it is safe to free my network namespace structure */
list_for_each_entry_safe(net, tmp, &net_exit_list, exit_list) {
list_del_init(&net->exit_list);
- net_free(net);
+ net_drop_ns(net);
}
}
static DECLARE_WORK(net_cleanup_work, cleanup_net);
@@ -310,19 +318,17 @@
struct file *file;
struct net *net;
- net = ERR_PTR(-EINVAL);
file = proc_ns_fget(fd);
- if (!file)
- goto out;
+ if (IS_ERR(file))
+ return ERR_CAST(file);
ei = PROC_I(file->f_dentry->d_inode);
- if (ei->ns_ops != &netns_operations)
- goto out;
+ if (ei->ns_ops == &netns_operations)
+ net = get_net(ei->ns);
+ else
+ net = ERR_PTR(-EINVAL);
- net = get_net(ei->ns);
-out:
- if (file)
- fput(file);
+ fput(file);
return net;
}
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 2d7d6d4..18d9cbd 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -792,6 +792,13 @@
return -ENODEV;
}
+ if (ndev->master) {
+ printk(KERN_ERR "%s: %s is a slave device, aborting.\n",
+ np->name, np->dev_name);
+ err = -EBUSY;
+ goto put;
+ }
+
if (!netif_running(ndev)) {
unsigned long atmost, atleast;
diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c
index ed0eab3..02548b2 100644
--- a/net/ieee802154/nl-phy.c
+++ b/net/ieee802154/nl-phy.c
@@ -44,7 +44,7 @@
pr_debug("%s\n", __func__);
if (!buf)
- goto out;
+ return -EMSGSIZE;
hdr = genlmsg_put(msg, 0, seq, &nl802154_family, flags,
IEEE802154_LIST_PHY);
@@ -65,6 +65,7 @@
pages * sizeof(uint32_t), buf);
mutex_unlock(&phy->pib_lock);
+ kfree(buf);
return genlmsg_end(msg, hdr);
nla_put_failure:
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 9c19260..ef1528a 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -465,8 +465,10 @@
if (addr_len < sizeof(struct sockaddr_in))
goto out;
- if (addr->sin_family != AF_INET)
+ if (addr->sin_family != AF_INET) {
+ err = -EAFNOSUPPORT;
goto out;
+ }
chk_addr_ret = inet_addr_type(sock_net(sk), addr->sin_addr.s_addr);
@@ -676,6 +678,7 @@
lock_sock(sk2);
+ sock_rps_record_flow(sk2);
WARN_ON(!((1 << sk2->sk_state) &
(TCPF_ESTABLISHED | TCPF_CLOSE_WAIT | TCPF_CLOSE)));
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index 6ffe94c..3267d38 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -437,7 +437,7 @@
return 0;
if (cc == len)
return 1;
- if (op->yes < 4)
+ if (op->yes < 4 || op->yes & 3)
return 0;
len -= op->yes;
bc += op->yes;
@@ -447,11 +447,11 @@
static int inet_diag_bc_audit(const void *bytecode, int bytecode_len)
{
- const unsigned char *bc = bytecode;
+ const void *bc = bytecode;
int len = bytecode_len;
while (len > 0) {
- struct inet_diag_bc_op *op = (struct inet_diag_bc_op *)bc;
+ const struct inet_diag_bc_op *op = bc;
//printk("BC: %d %d %d {%d} / %d\n", op->code, op->yes, op->no, op[1].no, len);
switch (op->code) {
@@ -462,22 +462,20 @@
case INET_DIAG_BC_S_LE:
case INET_DIAG_BC_D_GE:
case INET_DIAG_BC_D_LE:
- if (op->yes < 4 || op->yes > len + 4)
- return -EINVAL;
case INET_DIAG_BC_JMP:
- if (op->no < 4 || op->no > len + 4)
+ if (op->no < 4 || op->no > len + 4 || op->no & 3)
return -EINVAL;
if (op->no < len &&
!valid_cc(bytecode, bytecode_len, len - op->no))
return -EINVAL;
break;
case INET_DIAG_BC_NOP:
- if (op->yes < 4 || op->yes > len + 4)
- return -EINVAL;
break;
default:
return -EINVAL;
}
+ if (op->yes < 4 || op->yes > len + 4 || op->yes & 3)
+ return -EINVAL;
bc += op->yes;
len -= op->yes;
}
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 98af369..84f26e8 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -799,9 +799,9 @@
int csummode = CHECKSUM_NONE;
struct rtable *rt = (struct rtable *)cork->dst;
- exthdrlen = transhdrlen ? rt->dst.header_len : 0;
- length += exthdrlen;
- transhdrlen += exthdrlen;
+ skb = skb_peek_tail(queue);
+
+ exthdrlen = !skb ? rt->dst.header_len : 0;
mtu = cork->fragsize;
hh_len = LL_RESERVED_SPACE(rt->dst.dev);
@@ -825,12 +825,10 @@
!exthdrlen)
csummode = CHECKSUM_PARTIAL;
- skb = skb_peek_tail(queue);
-
cork->length += length;
if (((length > mtu) || (skb && skb_is_gso(skb))) &&
(sk->sk_protocol == IPPROTO_UDP) &&
- (rt->dst.dev->features & NETIF_F_UFO)) {
+ (rt->dst.dev->features & NETIF_F_UFO) && !rt->dst.header_len) {
err = ip_ufo_append_data(sk, queue, getfrag, from, length,
hh_len, fragheaderlen, transhdrlen,
mtu, flags);
@@ -883,17 +881,16 @@
else
alloclen = fraglen;
+ alloclen += exthdrlen;
+
/* The last fragment gets additional space at tail.
* Note, with MSG_MORE we overallocate on fragments,
* because we have no idea what fragment will be
* the last.
*/
- if (datalen == length + fraggap) {
+ if (datalen == length + fraggap)
alloclen += rt->dst.trailer_len;
- /* make sure mtu is not reached */
- if (datalen > mtu - fragheaderlen - rt->dst.trailer_len)
- datalen -= ALIGN(rt->dst.trailer_len, 8);
- }
+
if (transhdrlen) {
skb = sock_alloc_send_skb(sk,
alloclen + hh_len + 15,
@@ -926,11 +923,11 @@
/*
* Find where to start putting bytes.
*/
- data = skb_put(skb, fraglen);
+ data = skb_put(skb, fraglen + exthdrlen);
skb_set_network_header(skb, exthdrlen);
skb->transport_header = (skb->network_header +
fragheaderlen);
- data += fragheaderlen;
+ data += fragheaderlen + exthdrlen;
if (fraggap) {
skb->csum = skb_copy_and_csum_bits(
@@ -1064,7 +1061,7 @@
*/
*rtp = NULL;
cork->fragsize = inet->pmtudisc == IP_PMTUDISC_PROBE ?
- rt->dst.dev->mtu : dst_mtu(rt->dst.path);
+ rt->dst.dev->mtu : dst_mtu(&rt->dst);
cork->dst = &rt->dst;
cork->length = 0;
cork->tx_flags = ipc->tx_flags;
diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c
index 4614bab..2e97e3e 100644
--- a/net/ipv4/netfilter.c
+++ b/net/ipv4/netfilter.c
@@ -17,51 +17,35 @@
const struct iphdr *iph = ip_hdr(skb);
struct rtable *rt;
struct flowi4 fl4 = {};
- unsigned long orefdst;
+ __be32 saddr = iph->saddr;
+ __u8 flags = 0;
unsigned int hh_len;
- unsigned int type;
- type = inet_addr_type(net, iph->saddr);
- if (skb->sk && inet_sk(skb->sk)->transparent)
- type = RTN_LOCAL;
- if (addr_type == RTN_UNSPEC)
- addr_type = type;
+ if (!skb->sk && addr_type != RTN_LOCAL) {
+ if (addr_type == RTN_UNSPEC)
+ addr_type = inet_addr_type(net, saddr);
+ if (addr_type == RTN_LOCAL || addr_type == RTN_UNICAST)
+ flags |= FLOWI_FLAG_ANYSRC;
+ else
+ saddr = 0;
+ }
/* some non-standard hacks like ipt_REJECT.c:send_reset() can cause
* packets with foreign saddr to appear on the NF_INET_LOCAL_OUT hook.
*/
- if (addr_type == RTN_LOCAL) {
- fl4.daddr = iph->daddr;
- if (type == RTN_LOCAL)
- fl4.saddr = iph->saddr;
- fl4.flowi4_tos = RT_TOS(iph->tos);
- fl4.flowi4_oif = skb->sk ? skb->sk->sk_bound_dev_if : 0;
- fl4.flowi4_mark = skb->mark;
- fl4.flowi4_flags = skb->sk ? inet_sk_flowi_flags(skb->sk) : 0;
- rt = ip_route_output_key(net, &fl4);
- if (IS_ERR(rt))
- return -1;
+ fl4.daddr = iph->daddr;
+ fl4.saddr = saddr;
+ fl4.flowi4_tos = RT_TOS(iph->tos);
+ fl4.flowi4_oif = skb->sk ? skb->sk->sk_bound_dev_if : 0;
+ fl4.flowi4_mark = skb->mark;
+ fl4.flowi4_flags = skb->sk ? inet_sk_flowi_flags(skb->sk) : flags;
+ rt = ip_route_output_key(net, &fl4);
+ if (IS_ERR(rt))
+ return -1;
- /* Drop old route. */
- skb_dst_drop(skb);
- skb_dst_set(skb, &rt->dst);
- } else {
- /* non-local src, find valid iif to satisfy
- * rp-filter when calling ip_route_input. */
- fl4.daddr = iph->saddr;
- rt = ip_route_output_key(net, &fl4);
- if (IS_ERR(rt))
- return -1;
-
- orefdst = skb->_skb_refdst;
- if (ip_route_input(skb, iph->daddr, iph->saddr,
- RT_TOS(iph->tos), rt->dst.dev) != 0) {
- dst_release(&rt->dst);
- return -1;
- }
- dst_release(&rt->dst);
- refdst_drop(orefdst);
- }
+ /* Drop old route. */
+ skb_dst_drop(skb);
+ skb_dst_set(skb, &rt->dst);
if (skb_dst(skb)->error)
return -1;
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index d2c1311..5c9b9d9 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -203,7 +203,8 @@
else
pmsg->outdev_name[0] = '\0';
- if (entry->indev && entry->skb->dev) {
+ if (entry->indev && entry->skb->dev &&
+ entry->skb->mac_header != entry->skb->network_header) {
pmsg->hw_type = entry->skb->dev->type;
pmsg->hw_addrlen = dev_parse_header(entry->skb,
pmsg->hw_addr);
@@ -402,7 +403,8 @@
static inline void
__ipq_rcv_skb(struct sk_buff *skb)
{
- int status, type, pid, flags, nlmsglen, skblen;
+ int status, type, pid, flags;
+ unsigned int nlmsglen, skblen;
struct nlmsghdr *nlh;
skblen = skb->len;
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index 7647438..24e556e 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -566,7 +566,7 @@
const struct xt_entry_target *t;
if (!ip_checkentry(&e->ip)) {
- duprintf("ip check failed %p %s.\n", e, par->match->name);
+ duprintf("ip check failed %p %s.\n", e, name);
return -EINVAL;
}
diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index d609ac3..5c9e97c 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -307,7 +307,7 @@
* error messages (RELATED) and information requests (see below) */
if (ip_hdr(skb)->protocol == IPPROTO_ICMP &&
(ctinfo == IP_CT_RELATED ||
- ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY))
+ ctinfo == IP_CT_RELATED_REPLY))
return XT_CONTINUE;
/* ip_conntrack_icmp guarantees us that we only have ICMP_ECHO,
@@ -321,12 +321,12 @@
ct->mark = hash;
break;
case IP_CT_RELATED:
- case IP_CT_RELATED+IP_CT_IS_REPLY:
+ case IP_CT_RELATED_REPLY:
/* FIXME: we don't handle expectations at the
* moment. they can arrive on a different node than
* the master connection (e.g. FTP passive mode) */
case IP_CT_ESTABLISHED:
- case IP_CT_ESTABLISHED+IP_CT_IS_REPLY:
+ case IP_CT_ESTABLISHED_REPLY:
break;
default:
break;
diff --git a/net/ipv4/netfilter/ipt_MASQUERADE.c b/net/ipv4/netfilter/ipt_MASQUERADE.c
index d2ed9dc..9931152 100644
--- a/net/ipv4/netfilter/ipt_MASQUERADE.c
+++ b/net/ipv4/netfilter/ipt_MASQUERADE.c
@@ -60,7 +60,7 @@
nat = nfct_nat(ct);
NF_CT_ASSERT(ct && (ctinfo == IP_CT_NEW || ctinfo == IP_CT_RELATED ||
- ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY));
+ ctinfo == IP_CT_RELATED_REPLY));
/* Source address is 0.0.0.0 - locally generated packet that is
* probably not supposed to be masqueraded.
diff --git a/net/ipv4/netfilter/ipt_REJECT.c b/net/ipv4/netfilter/ipt_REJECT.c
index 1ff79e5..51f13f8 100644
--- a/net/ipv4/netfilter/ipt_REJECT.c
+++ b/net/ipv4/netfilter/ipt_REJECT.c
@@ -40,7 +40,6 @@
struct iphdr *niph;
const struct tcphdr *oth;
struct tcphdr _otcph, *tcph;
- unsigned int addr_type;
/* IP header checks: fragment. */
if (ip_hdr(oldskb)->frag_off & htons(IP_OFFSET))
@@ -55,6 +54,9 @@
if (oth->rst)
return;
+ if (skb_rtable(oldskb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
+ return;
+
/* Check checksum */
if (nf_ip_checksum(oldskb, hook, ip_hdrlen(oldskb), IPPROTO_TCP))
return;
@@ -101,19 +103,11 @@
nskb->csum_start = (unsigned char *)tcph - nskb->head;
nskb->csum_offset = offsetof(struct tcphdr, check);
- addr_type = RTN_UNSPEC;
- if (hook != NF_INET_FORWARD
-#ifdef CONFIG_BRIDGE_NETFILTER
- || (nskb->nf_bridge && nskb->nf_bridge->mask & BRNF_BRIDGED)
-#endif
- )
- addr_type = RTN_LOCAL;
-
/* ip_route_me_harder expects skb->dst to be set */
skb_dst_set_noref(nskb, skb_dst(oldskb));
nskb->protocol = htons(ETH_P_IP);
- if (ip_route_me_harder(nskb, addr_type))
+ if (ip_route_me_harder(nskb, RTN_UNSPEC))
goto free_nskb;
niph->ttl = ip4_dst_hoplimit(skb_dst(nskb));
diff --git a/net/ipv4/netfilter/ipt_ecn.c b/net/ipv4/netfilter/ipt_ecn.c
index af6e9c7..2b57e52 100644
--- a/net/ipv4/netfilter/ipt_ecn.c
+++ b/net/ipv4/netfilter/ipt_ecn.c
@@ -25,7 +25,8 @@
static inline bool match_ip(const struct sk_buff *skb,
const struct ipt_ecn_info *einfo)
{
- return (ip_hdr(skb)->tos & IPT_ECN_IP_MASK) == einfo->ip_ect;
+ return ((ip_hdr(skb)->tos & IPT_ECN_IP_MASK) == einfo->ip_ect) ^
+ !!(einfo->invert & IPT_ECN_OP_MATCH_IP);
}
static inline bool match_tcp(const struct sk_buff *skb,
@@ -76,8 +77,6 @@
return false;
if (info->operation & (IPT_ECN_OP_MATCH_ECE|IPT_ECN_OP_MATCH_CWR)) {
- if (ip_hdr(skb)->protocol != IPPROTO_TCP)
- return false;
if (!match_tcp(skb, info, &par->hotdrop))
return false;
}
@@ -97,7 +96,7 @@
return -EINVAL;
if (info->operation & (IPT_ECN_OP_MATCH_ECE|IPT_ECN_OP_MATCH_CWR) &&
- ip->proto != IPPROTO_TCP) {
+ (ip->proto != IPPROTO_TCP || ip->invflags & IPT_INV_PROTO)) {
pr_info("cannot match TCP bits in rule for non-tcp packets\n");
return -EINVAL;
}
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
index 5a03c02..de9da21 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -101,7 +101,7 @@
/* This is where we call the helper: as the packet goes out. */
ct = nf_ct_get(skb, &ctinfo);
- if (!ct || ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY)
+ if (!ct || ctinfo == IP_CT_RELATED_REPLY)
goto out;
help = nfct_help(ct);
@@ -121,7 +121,9 @@
return ret;
}
- if (test_bit(IPS_SEQ_ADJUST_BIT, &ct->status)) {
+ /* adjust seqs for loopback traffic only in outgoing direction */
+ if (test_bit(IPS_SEQ_ADJUST_BIT, &ct->status) &&
+ !nf_is_loopback_packet(skb)) {
typeof(nf_nat_seq_adjust_hook) seq_adjust;
seq_adjust = rcu_dereference(nf_nat_seq_adjust_hook);
diff --git a/net/ipv4/netfilter/nf_conntrack_proto_icmp.c b/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
index 7404bde..ab5b27a 100644
--- a/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
+++ b/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
@@ -160,7 +160,7 @@
/* Update skb to refer to this connection */
skb->nfct = &nf_ct_tuplehash_to_ctrack(h)->ct_general;
skb->nfctinfo = *ctinfo;
- return -NF_ACCEPT;
+ return NF_ACCEPT;
}
/* Small and modified version of icmp_rcv */
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index 9c71b27..3346de5 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -433,7 +433,7 @@
/* Must be RELATED */
NF_CT_ASSERT(skb->nfctinfo == IP_CT_RELATED ||
- skb->nfctinfo == IP_CT_RELATED+IP_CT_IS_REPLY);
+ skb->nfctinfo == IP_CT_RELATED_REPLY);
/* Redirects on non-null nats must be dropped, else they'll
start talking to each other without our translation, and be
diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c
index 99cfa28..ebc5f88 100644
--- a/net/ipv4/netfilter/nf_nat_helper.c
+++ b/net/ipv4/netfilter/nf_nat_helper.c
@@ -160,7 +160,7 @@
if (skb->ip_summed != CHECKSUM_PARTIAL) {
if (!(rt->rt_flags & RTCF_LOCAL) &&
- skb->dev->features & NETIF_F_V4_CSUM) {
+ (!skb->dev || skb->dev->features & NETIF_F_V4_CSUM)) {
skb->ip_summed = CHECKSUM_PARTIAL;
skb->csum_start = skb_headroom(skb) +
skb_network_offset(skb) +
diff --git a/net/ipv4/netfilter/nf_nat_rule.c b/net/ipv4/netfilter/nf_nat_rule.c
index 21c3042..733c9ab 100644
--- a/net/ipv4/netfilter/nf_nat_rule.c
+++ b/net/ipv4/netfilter/nf_nat_rule.c
@@ -53,7 +53,7 @@
/* Connection must be valid and new. */
NF_CT_ASSERT(ct && (ctinfo == IP_CT_NEW || ctinfo == IP_CT_RELATED ||
- ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY));
+ ctinfo == IP_CT_RELATED_REPLY));
NF_CT_ASSERT(par->out != NULL);
return nf_nat_setup_info(ct, &mr->range[0], IP_NAT_MANIP_SRC);
diff --git a/net/ipv4/netfilter/nf_nat_standalone.c b/net/ipv4/netfilter/nf_nat_standalone.c
index 7317bdf..483b76d 100644
--- a/net/ipv4/netfilter/nf_nat_standalone.c
+++ b/net/ipv4/netfilter/nf_nat_standalone.c
@@ -116,7 +116,7 @@
switch (ctinfo) {
case IP_CT_RELATED:
- case IP_CT_RELATED+IP_CT_IS_REPLY:
+ case IP_CT_RELATED_REPLY:
if (ip_hdr(skb)->protocol == IPPROTO_ICMP) {
if (!nf_nat_icmp_reply_translation(ct, ctinfo,
hooknum, skb))
@@ -144,7 +144,7 @@
default:
/* ESTABLISHED */
NF_CT_ASSERT(ctinfo == IP_CT_ESTABLISHED ||
- ctinfo == (IP_CT_ESTABLISHED+IP_CT_IS_REPLY));
+ ctinfo == IP_CT_ESTABLISHED_REPLY);
}
return nf_nat_packet(ct, ctinfo, hooknum, skb);
diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index 9aaa671..39b403f 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -41,7 +41,6 @@
#include <linux/proc_fs.h>
#include <net/sock.h>
#include <net/ping.h>
-#include <net/icmp.h>
#include <net/udp.h>
#include <net/route.h>
#include <net/inet_common.h>
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 52b0b95..aa13ef1 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1316,6 +1316,23 @@
;
}
+static bool peer_pmtu_expired(struct inet_peer *peer)
+{
+ unsigned long orig = ACCESS_ONCE(peer->pmtu_expires);
+
+ return orig &&
+ time_after_eq(jiffies, orig) &&
+ cmpxchg(&peer->pmtu_expires, orig, 0) == orig;
+}
+
+static bool peer_pmtu_cleaned(struct inet_peer *peer)
+{
+ unsigned long orig = ACCESS_ONCE(peer->pmtu_expires);
+
+ return orig &&
+ cmpxchg(&peer->pmtu_expires, orig, 0) == orig;
+}
+
static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst)
{
struct rtable *rt = (struct rtable *)dst;
@@ -1331,14 +1348,8 @@
rt_genid(dev_net(dst->dev)));
rt_del(hash, rt);
ret = NULL;
- } else if (rt->peer &&
- rt->peer->pmtu_expires &&
- time_after_eq(jiffies, rt->peer->pmtu_expires)) {
- unsigned long orig = rt->peer->pmtu_expires;
-
- if (cmpxchg(&rt->peer->pmtu_expires, orig, 0) == orig)
- dst_metric_set(dst, RTAX_MTU,
- rt->peer->pmtu_orig);
+ } else if (rt->peer && peer_pmtu_expired(rt->peer)) {
+ dst_metric_set(dst, RTAX_MTU, rt->peer->pmtu_orig);
}
}
return ret;
@@ -1531,8 +1542,10 @@
static void check_peer_pmtu(struct dst_entry *dst, struct inet_peer *peer)
{
- unsigned long expires = peer->pmtu_expires;
+ unsigned long expires = ACCESS_ONCE(peer->pmtu_expires);
+ if (!expires)
+ return;
if (time_before(jiffies, expires)) {
u32 orig_dst_mtu = dst_mtu(dst);
if (peer->pmtu_learned < orig_dst_mtu) {
@@ -1555,10 +1568,11 @@
rt_bind_peer(rt, rt->rt_dst, 1);
peer = rt->peer;
if (peer) {
+ unsigned long pmtu_expires = ACCESS_ONCE(peer->pmtu_expires);
+
if (mtu < ip_rt_min_pmtu)
mtu = ip_rt_min_pmtu;
- if (!peer->pmtu_expires || mtu < peer->pmtu_learned) {
- unsigned long pmtu_expires;
+ if (!pmtu_expires || mtu < peer->pmtu_learned) {
pmtu_expires = jiffies + ip_rt_mtu_expires;
if (!pmtu_expires)
@@ -1612,13 +1626,14 @@
rt_bind_peer(rt, rt->rt_dst, 0);
peer = rt->peer;
- if (peer && peer->pmtu_expires)
+ if (peer) {
check_peer_pmtu(dst, peer);
- if (peer && peer->redirect_learned.a4 &&
- peer->redirect_learned.a4 != rt->rt_gateway) {
- if (check_peer_redir(dst, peer))
- return NULL;
+ if (peer->redirect_learned.a4 &&
+ peer->redirect_learned.a4 != rt->rt_gateway) {
+ if (check_peer_redir(dst, peer))
+ return NULL;
+ }
}
rt->rt_peer_genid = rt_peer_genid();
@@ -1649,14 +1664,8 @@
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
rt = skb_rtable(skb);
- if (rt &&
- rt->peer &&
- rt->peer->pmtu_expires) {
- unsigned long orig = rt->peer->pmtu_expires;
-
- if (cmpxchg(&rt->peer->pmtu_expires, orig, 0) == orig)
- dst_metric_set(&rt->dst, RTAX_MTU, rt->peer->pmtu_orig);
- }
+ if (rt && rt->peer && peer_pmtu_cleaned(rt->peer))
+ dst_metric_set(&rt->dst, RTAX_MTU, rt->peer->pmtu_orig);
}
static int ip_rt_bug(struct sk_buff *skb)
@@ -1770,8 +1779,7 @@
sizeof(u32) * RTAX_MAX);
dst_init_metrics(&rt->dst, peer->metrics, false);
- if (peer->pmtu_expires)
- check_peer_pmtu(&rt->dst, peer);
+ check_peer_pmtu(&rt->dst, peer);
if (peer->redirect_learned.a4 &&
peer->redirect_learned.a4 != rt->rt_gateway) {
rt->rt_gateway = peer->redirect_learned.a4;
@@ -1894,9 +1902,7 @@
hash = rt_hash(daddr, saddr, dev->ifindex, rt_genid(dev_net(dev)));
rth = rt_intern_hash(hash, rth, skb, dev->ifindex);
- err = 0;
- if (IS_ERR(rth))
- err = PTR_ERR(rth);
+ return IS_ERR(rth) ? PTR_ERR(rth) : 0;
e_nobufs:
return -ENOBUFS;
@@ -2775,7 +2781,8 @@
struct rtable *rt = skb_rtable(skb);
struct rtmsg *r;
struct nlmsghdr *nlh;
- long expires;
+ long expires = 0;
+ const struct inet_peer *peer = rt->peer;
u32 id = 0, ts = 0, tsage = 0, error;
nlh = nlmsg_put(skb, pid, seq, event, sizeof(*r), flags);
@@ -2823,15 +2830,16 @@
NLA_PUT_BE32(skb, RTA_MARK, rt->rt_mark);
error = rt->dst.error;
- expires = (rt->peer && rt->peer->pmtu_expires) ?
- rt->peer->pmtu_expires - jiffies : 0;
- if (rt->peer) {
+ if (peer) {
inet_peer_refcheck(rt->peer);
- id = atomic_read(&rt->peer->ip_id_count) & 0xffff;
- if (rt->peer->tcp_ts_stamp) {
- ts = rt->peer->tcp_ts;
- tsage = get_seconds() - rt->peer->tcp_ts_stamp;
+ id = atomic_read(&peer->ip_id_count) & 0xffff;
+ if (peer->tcp_ts_stamp) {
+ ts = peer->tcp_ts;
+ tsage = get_seconds() - peer->tcp_ts_stamp;
}
+ expires = ACCESS_ONCE(peer->pmtu_expires);
+ if (expires)
+ expires -= jiffies;
}
if (rt_is_input_route(rt)) {
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 054a59d..46febca 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -3220,7 +3220,7 @@
void __init tcp_init(void)
{
struct sk_buff *skb = NULL;
- unsigned long nr_pages, limit;
+ unsigned long limit;
int i, max_share, cnt;
unsigned long jiffy = jiffies;
@@ -3277,13 +3277,7 @@
sysctl_tcp_max_orphans = cnt / 2;
sysctl_max_syn_backlog = max(128, cnt / 256);
- /* Set the pressure threshold to be a fraction of global memory that
- * is up to 1/2 at 256 MB, decreasing toward zero with the amount of
- * memory, with a floor of 128 pages.
- */
- nr_pages = totalram_pages - totalhigh_pages;
- limit = min(nr_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT);
- limit = (limit * (nr_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11);
+ limit = nr_free_buffer_pages() / 8;
limit = max(limit, 128UL);
sysctl_tcp_mem[0] = limit / 4 * 3;
sysctl_tcp_mem[1] = limit;
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index a7d6671..708dc20 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1589,6 +1589,7 @@
goto discard;
if (nsk != sk) {
+ sock_rps_save_rxhash(nsk, skb->rxhash);
if (tcp_child_process(sk, nsk, skb)) {
rsk = nsk;
goto reset;
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index abca870..198f75b 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1249,6 +1249,9 @@
if (noblock)
return -EAGAIN;
+
+ /* starting over for a new packet */
+ msg->msg_flags &= ~MSG_TRUNC;
goto try_again;
}
@@ -2206,16 +2209,10 @@
void __init udp_init(void)
{
- unsigned long nr_pages, limit;
+ unsigned long limit;
udp_table_init(&udp_table, "UDP");
- /* Set the pressure threshold up by the same strategy of TCP. It is a
- * fraction of global memory that is up to 1/2 at 256 MB, decreasing
- * toward zero with the amount of memory, with a floor of 128 pages.
- */
- nr_pages = totalram_pages - totalhigh_pages;
- limit = min(nr_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT);
- limit = (limit * (nr_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11);
+ limit = nr_free_buffer_pages() / 8;
limit = max(limit, 128UL);
sysctl_udp_mem[0] = limit / 4 * 3;
sysctl_udp_mem[1] = limit;
diff --git a/net/ipv4/xfrm4_output.c b/net/ipv4/xfrm4_output.c
index 2d51840..327a617 100644
--- a/net/ipv4/xfrm4_output.c
+++ b/net/ipv4/xfrm4_output.c
@@ -32,7 +32,12 @@
dst = skb_dst(skb);
mtu = dst_mtu(dst);
if (skb->len > mtu) {
- icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu));
+ if (skb->sk)
+ ip_local_error(skb->sk, EMSGSIZE, ip_hdr(skb)->daddr,
+ inet_sk(skb->sk)->inet_dport, mtu);
+ else
+ icmp_send(skb, ICMP_DEST_UNREACH,
+ ICMP_FRAG_NEEDED, htonl(mtu));
ret = -EMSGSIZE;
}
out:
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index b7919f9..3b5669a 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -272,6 +272,10 @@
if (addr_len < SIN6_LEN_RFC2133)
return -EINVAL;
+
+ if (addr->sin6_family != AF_INET6)
+ return -EAFNOSUPPORT;
+
addr_type = ipv6_addr_type(&addr->sin6_addr);
if ((addr_type & IPV6_ADDR_MULTICAST) && sock->type == SOCK_STREAM)
return -EINVAL;
diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
index 413ab07..2493948 100644
--- a/net/ipv6/netfilter/ip6_queue.c
+++ b/net/ipv6/netfilter/ip6_queue.c
@@ -204,7 +204,8 @@
else
pmsg->outdev_name[0] = '\0';
- if (entry->indev && entry->skb->dev) {
+ if (entry->indev && entry->skb->dev &&
+ entry->skb->mac_header != entry->skb->network_header) {
pmsg->hw_type = entry->skb->dev->type;
pmsg->hw_addrlen = dev_parse_header(entry->skb, pmsg->hw_addr);
}
@@ -403,7 +404,8 @@
static inline void
__ipq_rcv_skb(struct sk_buff *skb)
{
- int status, type, pid, flags, nlmsglen, skblen;
+ int status, type, pid, flags;
+ unsigned int nlmsglen, skblen;
struct nlmsghdr *nlh;
skblen = skb->len;
diff --git a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
index c8af58b..4111050 100644
--- a/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
+++ b/net/ipv6/netfilter/nf_conntrack_l3proto_ipv6.c
@@ -160,7 +160,7 @@
/* This is where we call the helper: as the packet goes out. */
ct = nf_ct_get(skb, &ctinfo);
- if (!ct || ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY)
+ if (!ct || ctinfo == IP_CT_RELATED_REPLY)
goto out;
help = nfct_help(ct);
diff --git a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
index 1df3c8b..7c05e7e 100644
--- a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
+++ b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
@@ -177,7 +177,7 @@
/* Update skb to refer to this connection */
skb->nfct = &nf_ct_tuplehash_to_ctrack(h)->ct_general;
skb->nfctinfo = *ctinfo;
- return -NF_ACCEPT;
+ return NF_ACCEPT;
}
static int
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index de2b1de..0ef1f08 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -228,9 +228,10 @@
/* allocate dst with ip6_dst_ops */
static inline struct rt6_info *ip6_dst_alloc(struct dst_ops *ops,
- struct net_device *dev)
+ struct net_device *dev,
+ int flags)
{
- struct rt6_info *rt = dst_alloc(ops, dev, 0, 0, 0);
+ struct rt6_info *rt = dst_alloc(ops, dev, 0, 0, flags);
memset(&rt->rt6i_table, 0, sizeof(*rt) - sizeof(struct dst_entry));
@@ -1042,7 +1043,7 @@
if (unlikely(idev == NULL))
return NULL;
- rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, dev);
+ rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, dev, 0);
if (unlikely(rt == NULL)) {
in6_dev_put(idev);
goto out;
@@ -1062,14 +1063,6 @@
dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255);
rt->dst.output = ip6_output;
-#if 0 /* there's no chance to use these for ndisc */
- rt->dst.flags = ipv6_addr_type(addr) & IPV6_ADDR_UNICAST
- ? DST_HOST
- : 0;
- ipv6_addr_copy(&rt->rt6i_dst.addr, addr);
- rt->rt6i_dst.plen = 128;
-#endif
-
spin_lock_bh(&icmp6_dst_lock);
rt->dst.next = icmp6_dst_gc_list;
icmp6_dst_gc_list = &rt->dst;
@@ -1214,7 +1207,7 @@
goto out;
}
- rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, NULL);
+ rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops, NULL, DST_NOCOUNT);
if (rt == NULL) {
err = -ENOMEM;
@@ -1244,7 +1237,7 @@
ipv6_addr_prefix(&rt->rt6i_dst.addr, &cfg->fc_dst, cfg->fc_dst_len);
rt->rt6i_dst.plen = cfg->fc_dst_len;
if (rt->rt6i_dst.plen == 128)
- rt->dst.flags = DST_HOST;
+ rt->dst.flags |= DST_HOST;
#ifdef CONFIG_IPV6_SUBTREES
ipv6_addr_prefix(&rt->rt6i_src.addr, &cfg->fc_src, cfg->fc_src_len);
@@ -1734,7 +1727,7 @@
{
struct net *net = dev_net(ort->rt6i_dev);
struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops,
- ort->dst.dev);
+ ort->dst.dev, 0);
if (rt) {
rt->dst.input = ort->dst.input;
@@ -2013,7 +2006,7 @@
{
struct net *net = dev_net(idev->dev);
struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops,
- net->loopback_dev);
+ net->loopback_dev, 0);
struct neighbour *neigh;
if (rt == NULL) {
@@ -2025,7 +2018,7 @@
in6_dev_hold(idev);
- rt->dst.flags = DST_HOST;
+ rt->dst.flags |= DST_HOST;
rt->dst.input = ip6_input;
rt->dst.output = ip6_output;
rt->rt6i_idev = idev;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index d1fd287..87551ca 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1644,6 +1644,7 @@
* the new socket..
*/
if(nsk != sk) {
+ sock_rps_save_rxhash(nsk, skb->rxhash);
if (tcp_child_process(sk, nsk, skb))
goto reset;
if (opt_skb)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 41f8c9c..328985c 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -453,8 +453,11 @@
}
unlock_sock_fast(sk, slow);
- if (flags & MSG_DONTWAIT)
+ if (noblock)
return -EAGAIN;
+
+ /* starting over for a new packet */
+ msg->msg_flags &= ~MSG_TRUNC;
goto try_again;
}
diff --git a/net/irda/iriap.c b/net/irda/iriap.c
index 3647753..f876eed 100644
--- a/net/irda/iriap.c
+++ b/net/irda/iriap.c
@@ -87,6 +87,8 @@
iriap_watchdog_timer_expired);
}
+static struct lock_class_key irias_objects_key;
+
/*
* Function iriap_init (void)
*
@@ -114,6 +116,9 @@
return -ENOMEM;
}
+ lockdep_set_class_and_name(&irias_objects->hb_spinlock, &irias_objects_key,
+ "irias_objects");
+
/*
* Register some default services for IrLMP
*/
diff --git a/net/l2tp/l2tp_debugfs.c b/net/l2tp/l2tp_debugfs.c
index b8dbae8..7613013 100644
--- a/net/l2tp/l2tp_debugfs.c
+++ b/net/l2tp/l2tp_debugfs.c
@@ -258,7 +258,7 @@
*/
pd->net = get_net_ns_by_pid(current->pid);
if (IS_ERR(pd->net)) {
- rc = -PTR_ERR(pd->net);
+ rc = PTR_ERR(pd->net);
goto err_free_pd;
}
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 421eaa6..56c24ca 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -965,6 +965,10 @@
mutex_lock(&sdata->u.ibss.mtx);
+ sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH;
+ memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
+ sdata->u.ibss.ssid_len = 0;
+
active_ibss = ieee80211_sta_active_ibss(sdata);
if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) {
@@ -999,8 +1003,6 @@
kfree_skb(skb);
skb_queue_purge(&sdata->skb_queue);
- memset(sdata->u.ibss.bssid, 0, ETH_ALEN);
- sdata->u.ibss.ssid_len = 0;
del_timer_sync(&sdata->u.ibss.timer);
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 2025af5..090b0ec 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -775,9 +775,6 @@
int tx_headroom; /* required headroom for hardware/radiotap */
- /* count for keys needing tailroom space allocation */
- int crypto_tx_tailroom_needed_cnt;
-
/* Tasklet and skb queue to process calls from IRQ mode. All frames
* added to skb_queue will be processed, but frames in
* skb_queue_unreliable may be dropped if the total length of these
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 49d4f86..dee30ae 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1145,6 +1145,10 @@
+ IEEE80211_ENCRYPT_HEADROOM;
ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
+ ret = dev_alloc_name(ndev, ndev->name);
+ if (ret < 0)
+ goto fail;
+
ieee80211_assign_perm_addr(local, ndev, type);
memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 31afd712..f825e2f 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -101,11 +101,6 @@
if (!ret) {
key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE;
-
- if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
- (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
- key->local->crypto_tx_tailroom_needed_cnt--;
-
return 0;
}
@@ -161,10 +156,6 @@
key->conf.keyidx, sta ? sta->addr : bcast_addr, ret);
key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE;
-
- if (!((key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC) ||
- (key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)))
- key->local->crypto_tx_tailroom_needed_cnt++;
}
void ieee80211_key_removed(struct ieee80211_key_conf *key_conf)
@@ -403,10 +394,8 @@
ieee80211_aes_key_free(key->u.ccmp.tfm);
if (key->conf.cipher == WLAN_CIPHER_SUITE_AES_CMAC)
ieee80211_aes_cmac_key_free(key->u.aes_cmac.tfm);
- if (key->local) {
+ if (key->local)
ieee80211_debugfs_key_remove(key);
- key->local->crypto_tx_tailroom_needed_cnt--;
- }
kfree(key);
}
@@ -468,8 +457,6 @@
ieee80211_debugfs_key_add(key);
- key->local->crypto_tx_tailroom_needed_cnt++;
-
ret = ieee80211_key_enable_hw_accel(key);
mutex_unlock(&sdata->local->key_mtx);
@@ -511,12 +498,8 @@
mutex_lock(&sdata->local->key_mtx);
- sdata->local->crypto_tx_tailroom_needed_cnt = 0;
-
- list_for_each_entry(key, &sdata->key_list, list) {
- sdata->local->crypto_tx_tailroom_needed_cnt++;
+ list_for_each_entry(key, &sdata->key_list, list)
ieee80211_key_enable_hw_accel(key);
- }
mutex_unlock(&sdata->local->key_mtx);
}
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 456cccf..d595265 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -232,9 +232,6 @@
WARN_ON(!ieee80211_set_channel_type(local, sdata, channel_type));
}
- ieee80211_stop_queues_by_reason(&sdata->local->hw,
- IEEE80211_QUEUE_STOP_REASON_CSA);
-
/* channel_type change automatically detected */
ieee80211_hw_config(local, 0);
@@ -248,9 +245,6 @@
rcu_read_unlock();
}
- ieee80211_wake_queues_by_reason(&sdata->local->hw,
- IEEE80211_QUEUE_STOP_REASON_CSA);
-
ht_opmode = le16_to_cpu(hti->operation_mode);
/* if bss configuration changed store the new one */
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 58ffa7d..669d2e3 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -877,7 +877,8 @@
for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
local->sched_scan_ies.ie[i] = kzalloc(2 +
IEEE80211_MAX_SSID_LEN +
- local->scan_ies_len,
+ local->scan_ies_len +
+ req->ie_len,
GFP_KERNEL);
if (!local->sched_scan_ies.ie[i]) {
ret = -ENOMEM;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 64e0f75..3104c84 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1480,7 +1480,12 @@
{
int tail_need = 0;
- if (may_encrypt && local->crypto_tx_tailroom_needed_cnt) {
+ /*
+ * This could be optimised, devices that do full hardware
+ * crypto (including TKIP MMIC) need no tailroom... But we
+ * have no drivers for such devices currently.
+ */
+ if (may_encrypt) {
tail_need = IEEE80211_ENCRYPT_TAILROOM;
tail_need -= skb_tailroom(skb);
tail_need = max_t(int, tail_need, 0);
diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c
index 9dc3b5f..8f6a302 100644
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -86,6 +86,11 @@
struct sk_buff *skb = rx->skb;
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ int queue = rx->queue;
+
+ /* otherwise, TKIP is vulnerable to TID 0 vs. non-QoS replays */
+ if (rx->queue == NUM_RX_DATA_QUEUES - 1)
+ queue = 0;
/*
* it makes no sense to check for MIC errors on anything other
@@ -148,13 +153,19 @@
update_iv:
/* update IV in key information to be able to detect replays */
- rx->key->u.tkip.rx[rx->queue].iv32 = rx->tkip_iv32;
- rx->key->u.tkip.rx[rx->queue].iv16 = rx->tkip_iv16;
+ rx->key->u.tkip.rx[queue].iv32 = rx->tkip_iv32;
+ rx->key->u.tkip.rx[queue].iv16 = rx->tkip_iv16;
return RX_CONTINUE;
mic_fail:
- mac80211_ev_michael_mic_failure(rx->sdata, rx->key->conf.keyidx,
+ /*
+ * In some cases the key can be unset - e.g. a multicast packet, in
+ * a driver that supports HW encryption. Send up the key idx only if
+ * the key is set.
+ */
+ mac80211_ev_michael_mic_failure(rx->sdata,
+ rx->key ? rx->key->conf.keyidx : -1,
(void *) skb->data, NULL, GFP_ATOMIC);
return RX_DROP_UNUSABLE;
}
@@ -235,6 +246,11 @@
struct ieee80211_key *key = rx->key;
struct sk_buff *skb = rx->skb;
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+ int queue = rx->queue;
+
+ /* otherwise, TKIP is vulnerable to TID 0 vs. non-QoS replays */
+ if (rx->queue == NUM_RX_DATA_QUEUES - 1)
+ queue = 0;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
@@ -255,7 +271,7 @@
res = ieee80211_tkip_decrypt_data(rx->local->wep_rx_tfm,
key, skb->data + hdrlen,
skb->len - hdrlen, rx->sta->sta.addr,
- hdr->addr1, hwaccel, rx->queue,
+ hdr->addr1, hwaccel, queue,
&rx->tkip_iv32,
&rx->tkip_iv16);
if (res != TKIP_DECRYPT_OK)
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index 8041bef..42aa64b 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -767,7 +767,7 @@
if (!attr[IPSET_ATTR_SETNAME]) {
for (i = 0; i < ip_set_max; i++) {
if (ip_set_list[i] != NULL && ip_set_list[i]->ref) {
- ret = IPSET_ERR_BUSY;
+ ret = -IPSET_ERR_BUSY;
goto out;
}
}
diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c
index 4743e54..565a7c5 100644
--- a/net/netfilter/ipset/ip_set_hash_ipportnet.c
+++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c
@@ -146,8 +146,9 @@
{
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct hash_ipportnet4_elem data =
- { .cidr = h->nets[0].cidr || HOST_MASK };
+ struct hash_ipportnet4_elem data = {
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
@@ -394,8 +395,9 @@
{
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct hash_ipportnet6_elem data =
- { .cidr = h->nets[0].cidr || HOST_MASK };
+ struct hash_ipportnet6_elem data = {
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
diff --git a/net/netfilter/ipset/ip_set_hash_net.c b/net/netfilter/ipset/ip_set_hash_net.c
index c4db202..2aeeabc 100644
--- a/net/netfilter/ipset/ip_set_hash_net.c
+++ b/net/netfilter/ipset/ip_set_hash_net.c
@@ -131,7 +131,9 @@
{
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct hash_net4_elem data = { .cidr = h->nets[0].cidr || HOST_MASK };
+ struct hash_net4_elem data = {
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
@@ -296,7 +298,9 @@
{
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
- struct hash_net6_elem data = { .cidr = h->nets[0].cidr || HOST_MASK };
+ struct hash_net6_elem data = {
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
diff --git a/net/netfilter/ipset/ip_set_hash_netport.c b/net/netfilter/ipset/ip_set_hash_netport.c
index d2a4036..e50d9bb 100644
--- a/net/netfilter/ipset/ip_set_hash_netport.c
+++ b/net/netfilter/ipset/ip_set_hash_netport.c
@@ -144,7 +144,8 @@
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_netport4_elem data = {
- .cidr = h->nets[0].cidr || HOST_MASK };
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
@@ -357,7 +358,8 @@
const struct ip_set_hash *h = set->data;
ipset_adtfn adtfn = set->variant->adt[adt];
struct hash_netport6_elem data = {
- .cidr = h->nets[0].cidr || HOST_MASK };
+ .cidr = h->nets[0].cidr ? h->nets[0].cidr : HOST_MASK
+ };
if (data.cidr == 0)
return -EINVAL;
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index bf28ac2..782db27 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -776,8 +776,16 @@
if (cp->control)
ip_vs_control_del(cp);
- if (cp->flags & IP_VS_CONN_F_NFCT)
+ if (cp->flags & IP_VS_CONN_F_NFCT) {
ip_vs_conn_drop_conntrack(cp);
+ /* Do not access conntracks during subsys cleanup
+ * because nf_conntrack_find_get can not be used after
+ * conntrack cleanup for the net.
+ */
+ smp_rmb();
+ if (ipvs->enable)
+ ip_vs_conn_drop_conntrack(cp);
+ }
ip_vs_pe_put(cp->pe);
kfree(cp->pe_data);
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index bfa808f..24c28d2 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -1772,7 +1772,7 @@
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_IN,
- .priority = 99,
+ .priority = NF_IP_PRI_NAT_SRC - 2,
},
/* After packet filtering, forward packet through VS/DR, VS/TUN,
* or VS/NAT(change destination), so that filtering rules can be
@@ -1782,7 +1782,7 @@
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_IN,
- .priority = 101,
+ .priority = NF_IP_PRI_NAT_SRC - 1,
},
/* Before ip_vs_in, change source only for VS/NAT */
{
@@ -1790,7 +1790,7 @@
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_OUT,
- .priority = -99,
+ .priority = NF_IP_PRI_NAT_DST + 1,
},
/* After mangle, schedule and forward local requests */
{
@@ -1798,7 +1798,7 @@
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_OUT,
- .priority = -98,
+ .priority = NF_IP_PRI_NAT_DST + 2,
},
/* After packet filtering (but before ip_vs_out_icmp), catch icmp
* destined for 0.0.0.0/0, which is for incoming IPVS connections */
@@ -1824,7 +1824,7 @@
.owner = THIS_MODULE,
.pf = PF_INET6,
.hooknum = NF_INET_LOCAL_IN,
- .priority = 99,
+ .priority = NF_IP6_PRI_NAT_SRC - 2,
},
/* After packet filtering, forward packet through VS/DR, VS/TUN,
* or VS/NAT(change destination), so that filtering rules can be
@@ -1834,7 +1834,7 @@
.owner = THIS_MODULE,
.pf = PF_INET6,
.hooknum = NF_INET_LOCAL_IN,
- .priority = 101,
+ .priority = NF_IP6_PRI_NAT_SRC - 1,
},
/* Before ip_vs_in, change source only for VS/NAT */
{
@@ -1842,7 +1842,7 @@
.owner = THIS_MODULE,
.pf = PF_INET,
.hooknum = NF_INET_LOCAL_OUT,
- .priority = -99,
+ .priority = NF_IP6_PRI_NAT_DST + 1,
},
/* After mangle, schedule and forward local requests */
{
@@ -1850,7 +1850,7 @@
.owner = THIS_MODULE,
.pf = PF_INET6,
.hooknum = NF_INET_LOCAL_OUT,
- .priority = -98,
+ .priority = NF_IP6_PRI_NAT_DST + 2,
},
/* After packet filtering (but before ip_vs_out_icmp), catch icmp
* destined for 0.0.0.0/0, which is for incoming IPVS connections */
@@ -1945,6 +1945,7 @@
{
EnterFunction(2);
net_ipvs(net)->enable = 0; /* Disable packet reception */
+ smp_wmb();
__ip_vs_sync_cleanup(net);
LeaveFunction(2);
}
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 2e1c11f..f7af8b8 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -850,7 +850,7 @@
/* It exists; we have (non-exclusive) reference. */
if (NF_CT_DIRECTION(h) == IP_CT_DIR_REPLY) {
- *ctinfo = IP_CT_ESTABLISHED + IP_CT_IS_REPLY;
+ *ctinfo = IP_CT_ESTABLISHED_REPLY;
/* Please set reply bit if this packet OK */
*set_reply = 1;
} else {
@@ -922,6 +922,9 @@
ret = -ret;
goto out;
}
+ /* ICMP[v6] protocol trackers may assign one conntrack. */
+ if (skb->nfct)
+ goto out;
}
ct = resolve_normal_ct(net, tmpl, skb, dataoff, pf, protonum,
@@ -1143,7 +1146,7 @@
/* This ICMP is in reverse direction to the packet which caused it */
ct = nf_ct_get(skb, &ctinfo);
if (CTINFO2DIR(ctinfo) == IP_CT_DIR_ORIGINAL)
- ctinfo = IP_CT_RELATED + IP_CT_IS_REPLY;
+ ctinfo = IP_CT_RELATED_REPLY;
else
ctinfo = IP_CT_RELATED;
diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c
index e17cb7c..6f5801e 100644
--- a/net/netfilter/nf_conntrack_ftp.c
+++ b/net/netfilter/nf_conntrack_ftp.c
@@ -368,7 +368,7 @@
/* Until there's been traffic both ways, don't look in packets. */
if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
+ ctinfo != IP_CT_ESTABLISHED_REPLY) {
pr_debug("ftp: Conntrackinfo = %u\n", ctinfo);
return NF_ACCEPT;
}
diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c
index 18b2ce5..f03c2d4 100644
--- a/net/netfilter/nf_conntrack_h323_main.c
+++ b/net/netfilter/nf_conntrack_h323_main.c
@@ -571,10 +571,9 @@
int ret;
/* Until there's been traffic both ways, don't look in packets. */
- if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
+ if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
- }
+
pr_debug("nf_ct_h245: skblen = %u\n", skb->len);
spin_lock_bh(&nf_h323_lock);
@@ -1125,10 +1124,9 @@
int ret;
/* Until there's been traffic both ways, don't look in packets. */
- if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
+ if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
- }
+
pr_debug("nf_ct_q931: skblen = %u\n", skb->len);
spin_lock_bh(&nf_h323_lock);
diff --git a/net/netfilter/nf_conntrack_irc.c b/net/netfilter/nf_conntrack_irc.c
index b394aa3..4f9390b 100644
--- a/net/netfilter/nf_conntrack_irc.c
+++ b/net/netfilter/nf_conntrack_irc.c
@@ -125,8 +125,7 @@
return NF_ACCEPT;
/* Until there's been traffic both ways, don't look in packets. */
- if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY)
+ if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
/* Not a full tcp header? */
diff --git a/net/netfilter/nf_conntrack_pptp.c b/net/netfilter/nf_conntrack_pptp.c
index 0889448..2fd4565 100644
--- a/net/netfilter/nf_conntrack_pptp.c
+++ b/net/netfilter/nf_conntrack_pptp.c
@@ -519,8 +519,7 @@
u_int16_t msg;
/* don't do any tracking before tcp handshake complete */
- if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY)
+ if (ctinfo != IP_CT_ESTABLISHED && ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
nexthdr_off = protoff;
diff --git a/net/netfilter/nf_conntrack_sane.c b/net/netfilter/nf_conntrack_sane.c
index d9e2773..8501823 100644
--- a/net/netfilter/nf_conntrack_sane.c
+++ b/net/netfilter/nf_conntrack_sane.c
@@ -78,7 +78,7 @@
ct_sane_info = &nfct_help(ct)->help.ct_sane_info;
/* Until there's been traffic both ways, don't look in packets. */
if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED+IP_CT_IS_REPLY)
+ ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
/* Not a full tcp header? */
diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index cb5a285..93faf6a 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -1423,7 +1423,7 @@
typeof(nf_nat_sip_seq_adjust_hook) nf_nat_sip_seq_adjust;
if (ctinfo != IP_CT_ESTABLISHED &&
- ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY)
+ ctinfo != IP_CT_ESTABLISHED_REPLY)
return NF_ACCEPT;
/* No Data ? */
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index e0ee010..2e7ccbb 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -456,7 +456,8 @@
if (skb->mark)
NLA_PUT_BE32(inst->skb, NFULA_MARK, htonl(skb->mark));
- if (indev && skb->dev) {
+ if (indev && skb->dev &&
+ skb->mac_header != skb->network_header) {
struct nfulnl_msg_packet_hw phw;
int len = dev_parse_header(skb, phw.hw_addr);
if (len > 0) {
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index b83123f..fdd2faf 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -335,7 +335,8 @@
if (entskb->mark)
NLA_PUT_BE32(skb, NFQA_MARK, htonl(entskb->mark));
- if (indev && entskb->dev) {
+ if (indev && entskb->dev &&
+ entskb->mac_header != entskb->network_header) {
struct nfqnl_msg_packet_hw phw;
int len = dev_parse_header(entskb, phw.hw_addr);
if (len) {
diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c
index 9cc4635..fe39f7e 100644
--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -143,9 +143,9 @@
ct = nf_ct_get(skb, &ctinfo);
if (ct && !nf_ct_is_untracked(ct) &&
((iph->protocol != IPPROTO_ICMP &&
- ctinfo == IP_CT_IS_REPLY + IP_CT_ESTABLISHED) ||
+ ctinfo == IP_CT_ESTABLISHED_REPLY) ||
(iph->protocol == IPPROTO_ICMP &&
- ctinfo == IP_CT_IS_REPLY + IP_CT_RELATED)) &&
+ ctinfo == IP_CT_RELATED_REPLY)) &&
(ct->status & IPS_SRC_NAT_DONE)) {
daddr = ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip;
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index ba248d9..c0c3cda 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -804,6 +804,7 @@
} else {
h.h2->tp_vlan_tci = 0;
}
+ h.h2->tp_padding = 0;
hdrlen = sizeof(*h.h2);
break;
default:
@@ -1736,6 +1737,7 @@
} else {
aux.tp_vlan_tci = 0;
}
+ aux.tp_padding = 0;
put_cmsg(msg, SOL_PACKET, PACKET_AUXDATA, sizeof(aux), &aux);
}
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index b1721d7..b4c6809 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -251,9 +251,8 @@
}
if (some_queue_timedout) {
- char drivername[64];
WARN_ONCE(1, KERN_INFO "NETDEV WATCHDOG: %s (%s): transmit queue %u timed out\n",
- dev->name, netdev_drivername(dev, drivername, 64), i);
+ dev->name, netdev_drivername(dev), i);
dev->netdev_ops->ndo_tx_timeout(dev);
}
if (!mod_timer(&dev->watchdog_timer,
diff --git a/net/sctp/output.c b/net/sctp/output.c
index b4f3cf0..08b3cea 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -500,23 +500,20 @@
* Note: Adler-32 is no longer applicable, as has been replaced
* by CRC32-C as described in <draft-ietf-tsvwg-sctpcsum-02.txt>.
*/
- if (!sctp_checksum_disable &&
- !(dst->dev->features & (NETIF_F_NO_CSUM | NETIF_F_SCTP_CSUM))) {
- __u32 crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len);
+ if (!sctp_checksum_disable) {
+ if (!(dst->dev->features & NETIF_F_SCTP_CSUM)) {
+ __u32 crc32 = sctp_start_cksum((__u8 *)sh, cksum_buf_len);
- /* 3) Put the resultant value into the checksum field in the
- * common header, and leave the rest of the bits unchanged.
- */
- sh->checksum = sctp_end_cksum(crc32);
- } else {
- if (dst->dev->features & NETIF_F_SCTP_CSUM) {
+ /* 3) Put the resultant value into the checksum field in the
+ * common header, and leave the rest of the bits unchanged.
+ */
+ sh->checksum = sctp_end_cksum(crc32);
+ } else {
/* no need to seed pseudo checksum for SCTP */
nskb->ip_summed = CHECKSUM_PARTIAL;
nskb->csum_start = (skb_transport_header(nskb) -
nskb->head);
nskb->csum_offset = offsetof(struct sctphdr, checksum);
- } else {
- nskb->ip_summed = CHECKSUM_UNNECESSARY;
}
}
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 1c88c89..d036821 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -1582,6 +1582,8 @@
#endif /* SCTP_DEBUG */
if (transport) {
if (bytes_acked) {
+ struct sctp_association *asoc = transport->asoc;
+
/* We may have counted DATA that was migrated
* to this transport due to DEL-IP operation.
* Subtract those bytes, since the were never
@@ -1600,6 +1602,17 @@
transport->error_count = 0;
transport->asoc->overall_error_count = 0;
+ /*
+ * While in SHUTDOWN PENDING, we may have started
+ * the T5 shutdown guard timer after reaching the
+ * retransmission limit. Stop that timer as soon
+ * as the receiver acknowledged any data.
+ */
+ if (asoc->state == SCTP_STATE_SHUTDOWN_PENDING &&
+ del_timer(&asoc->timers
+ [SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD]))
+ sctp_association_put(asoc);
+
/* Mark the destination transport address as
* active if it is not so marked.
*/
@@ -1629,10 +1642,15 @@
* A sender is doing zero window probing when the
* receiver's advertised window is zero, and there is
* only one data chunk in flight to the receiver.
+ *
+ * Allow the association to timeout while in SHUTDOWN
+ * PENDING or SHUTDOWN RECEIVED in case the receiver
+ * stays in zero window mode forever.
*/
if (!q->asoc->peer.rwnd &&
!list_empty(&tlist) &&
- (sack_ctsn+2 == q->asoc->next_tsn)) {
+ (sack_ctsn+2 == q->asoc->next_tsn) &&
+ q->asoc->state < SCTP_STATE_SHUTDOWN_PENDING) {
SCTP_DEBUG_PRINTK("%s: SACK received for zero "
"window probe: %u\n",
__func__, sack_ctsn);
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 67380a2..207175b 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1058,7 +1058,6 @@
int status = -EINVAL;
unsigned long goal;
unsigned long limit;
- unsigned long nr_pages;
int max_share;
int order;
@@ -1148,15 +1147,7 @@
/* Initialize handle used for association ids. */
idr_init(&sctp_assocs_id);
- /* Set the pressure threshold to be a fraction of global memory that
- * is up to 1/2 at 256 MB, decreasing toward zero with the amount of
- * memory, with a floor of 128 pages.
- * Note this initializes the data in sctpv6_prot too
- * Unabashedly stolen from tcp_init
- */
- nr_pages = totalram_pages - totalhigh_pages;
- limit = min(nr_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT);
- limit = (limit * (nr_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11);
+ limit = nr_free_buffer_pages() / 8;
limit = max(limit, 128UL);
sysctl_sctp_mem[0] = limit / 4 * 3;
sysctl_sctp_mem[1] = limit;
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 534c2e5..6e0f882 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -670,10 +670,19 @@
/* 8.3 Upon the receipt of the HEARTBEAT ACK, the sender of the
* HEARTBEAT should clear the error counter of the destination
* transport address to which the HEARTBEAT was sent.
- * The association's overall error count is also cleared.
*/
t->error_count = 0;
- t->asoc->overall_error_count = 0;
+
+ /*
+ * Although RFC4960 specifies that the overall error count must
+ * be cleared when a HEARTBEAT ACK is received, we make an
+ * exception while in SHUTDOWN PENDING. If the peer keeps its
+ * window shut forever, we may never be able to transmit our
+ * outstanding data and rely on the retransmission limit be reached
+ * to shutdown the association.
+ */
+ if (t->asoc->state != SCTP_STATE_SHUTDOWN_PENDING)
+ t->asoc->overall_error_count = 0;
/* Clear the hb_sent flag to signal that we had a good
* acknowledgement.
@@ -1437,6 +1446,13 @@
sctp_cmd_setup_t2(commands, asoc, cmd->obj.ptr);
break;
+ case SCTP_CMD_TIMER_START_ONCE:
+ timer = &asoc->timers[cmd->obj.to];
+
+ if (timer_pending(timer))
+ break;
+ /* fall through */
+
case SCTP_CMD_TIMER_START:
timer = &asoc->timers[cmd->obj.to];
timeout = asoc->timeouts[cmd->obj.to];
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index a297283..2461171 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -5154,7 +5154,7 @@
* The sender of the SHUTDOWN MAY also start an overall guard timer
* 'T5-shutdown-guard' to bound the overall time for shutdown sequence.
*/
- sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_START,
+ sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART,
SCTP_TO(SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD));
if (asoc->autoclose)
@@ -5299,14 +5299,28 @@
SCTP_INC_STATS(SCTP_MIB_T3_RTX_EXPIREDS);
if (asoc->overall_error_count >= asoc->max_retrans) {
- sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
- SCTP_ERROR(ETIMEDOUT));
- /* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
- sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
- SCTP_PERR(SCTP_ERROR_NO_ERROR));
- SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
- SCTP_DEC_STATS(SCTP_MIB_CURRESTAB);
- return SCTP_DISPOSITION_DELETE_TCB;
+ if (asoc->state == SCTP_STATE_SHUTDOWN_PENDING) {
+ /*
+ * We are here likely because the receiver had its rwnd
+ * closed for a while and we have not been able to
+ * transmit the locally queued data within the maximum
+ * retransmission attempts limit. Start the T5
+ * shutdown guard timer to give the receiver one last
+ * chance and some additional time to recover before
+ * aborting.
+ */
+ sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_START_ONCE,
+ SCTP_TO(SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD));
+ } else {
+ sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+ SCTP_ERROR(ETIMEDOUT));
+ /* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
+ sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
+ SCTP_PERR(SCTP_ERROR_NO_ERROR));
+ SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
+ SCTP_DEC_STATS(SCTP_MIB_CURRESTAB);
+ return SCTP_DISPOSITION_DELETE_TCB;
+ }
}
/* E1) For the destination address for which the timer
diff --git a/net/sctp/sm_statetable.c b/net/sctp/sm_statetable.c
index 0338dc6..7c211a7 100644
--- a/net/sctp/sm_statetable.c
+++ b/net/sctp/sm_statetable.c
@@ -827,7 +827,7 @@
/* SCTP_STATE_ESTABLISHED */ \
TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
/* SCTP_STATE_SHUTDOWN_PENDING */ \
- TYPE_SCTP_FUNC(sctp_sf_timer_ignore), \
+ TYPE_SCTP_FUNC(sctp_sf_t5_timer_expire), \
/* SCTP_STATE_SHUTDOWN_SENT */ \
TYPE_SCTP_FUNC(sctp_sf_t5_timer_expire), \
/* SCTP_STATE_SHUTDOWN_RECEIVED */ \
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 6766913..d3ccf79 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1384,6 +1384,7 @@
struct sctp_endpoint *ep;
struct sctp_association *asoc;
struct list_head *pos, *temp;
+ unsigned int data_was_unread;
SCTP_DEBUG_PRINTK("sctp_close(sk: 0x%p, timeout:%ld)\n", sk, timeout);
@@ -1393,6 +1394,10 @@
ep = sctp_sk(sk)->ep;
+ /* Clean up any skbs sitting on the receive queue. */
+ data_was_unread = sctp_queue_purge_ulpevents(&sk->sk_receive_queue);
+ data_was_unread += sctp_queue_purge_ulpevents(&sctp_sk(sk)->pd_lobby);
+
/* Walk all associations on an endpoint. */
list_for_each_safe(pos, temp, &ep->asocs) {
asoc = list_entry(pos, struct sctp_association, asocs);
@@ -1410,7 +1415,9 @@
}
}
- if (sock_flag(sk, SOCK_LINGER) && !sk->sk_lingertime) {
+ if (data_was_unread || !skb_queue_empty(&asoc->ulpq.lobby) ||
+ !skb_queue_empty(&asoc->ulpq.reasm) ||
+ (sock_flag(sk, SOCK_LINGER) && !sk->sk_lingertime)) {
struct sctp_chunk *chunk;
chunk = sctp_make_abort_user(asoc, NULL, 0);
@@ -1420,10 +1427,6 @@
sctp_primitive_SHUTDOWN(asoc, NULL);
}
- /* Clean up any skbs sitting on the receive queue. */
- sctp_queue_purge_ulpevents(&sk->sk_receive_queue);
- sctp_queue_purge_ulpevents(&sctp_sk(sk)->pd_lobby);
-
/* On a TCP-style socket, block for at most linger_time if set. */
if (sctp_style(sk, TCP) && timeout)
sctp_wait_for_close(sk, timeout);
@@ -2073,10 +2076,33 @@
static int sctp_setsockopt_events(struct sock *sk, char __user *optval,
unsigned int optlen)
{
+ struct sctp_association *asoc;
+ struct sctp_ulpevent *event;
+
if (optlen > sizeof(struct sctp_event_subscribe))
return -EINVAL;
if (copy_from_user(&sctp_sk(sk)->subscribe, optval, optlen))
return -EFAULT;
+
+ /*
+ * At the time when a user app subscribes to SCTP_SENDER_DRY_EVENT,
+ * if there is no data to be sent or retransmit, the stack will
+ * immediately send up this notification.
+ */
+ if (sctp_ulpevent_type_enabled(SCTP_SENDER_DRY_EVENT,
+ &sctp_sk(sk)->subscribe)) {
+ asoc = sctp_id2assoc(sk, 0);
+
+ if (asoc && sctp_outq_is_empty(&asoc->outqueue)) {
+ event = sctp_ulpevent_make_sender_dry_event(asoc,
+ GFP_ATOMIC);
+ if (!event)
+ return -ENOMEM;
+
+ sctp_ulpq_tail_event(&asoc->ulpq, event);
+ }
+ }
+
return 0;
}
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index e70e5fc..8a84017 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -1081,9 +1081,19 @@
}
/* Purge the skb lists holding ulpevents. */
-void sctp_queue_purge_ulpevents(struct sk_buff_head *list)
+unsigned int sctp_queue_purge_ulpevents(struct sk_buff_head *list)
{
struct sk_buff *skb;
- while ((skb = skb_dequeue(list)) != NULL)
- sctp_ulpevent_free(sctp_skb2event(skb));
+ unsigned int data_unread = 0;
+
+ while ((skb = skb_dequeue(list)) != NULL) {
+ struct sctp_ulpevent *event = sctp_skb2event(skb);
+
+ if (!sctp_ulpevent_is_notification(event))
+ data_unread += skb->len;
+
+ sctp_ulpevent_free(event);
+ }
+
+ return data_unread;
}
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 339ba64..5daf6cc 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -577,13 +577,13 @@
}
inode = &gss_msg->inode->vfs_inode;
for (;;) {
- prepare_to_wait(&gss_msg->waitqueue, &wait, TASK_INTERRUPTIBLE);
+ prepare_to_wait(&gss_msg->waitqueue, &wait, TASK_KILLABLE);
spin_lock(&inode->i_lock);
if (gss_msg->ctx != NULL || gss_msg->msg.errno < 0) {
break;
}
spin_unlock(&inode->i_lock);
- if (signalled()) {
+ if (fatal_signal_pending(current)) {
err = -ERESTARTSYS;
goto out_intr;
}
diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c
index 0a9a2ec..c3b7533 100644
--- a/net/sunrpc/auth_gss/gss_krb5_mech.c
+++ b/net/sunrpc/auth_gss/gss_krb5_mech.c
@@ -43,6 +43,7 @@
#include <linux/sunrpc/gss_krb5.h>
#include <linux/sunrpc/xdr.h>
#include <linux/crypto.h>
+#include <linux/sunrpc/gss_krb5_enctypes.h>
#ifdef RPC_DEBUG
# define RPCDBG_FACILITY RPCDBG_AUTH
@@ -750,7 +751,7 @@
.gm_ops = &gss_kerberos_ops,
.gm_pf_num = ARRAY_SIZE(gss_kerberos_pfs),
.gm_pfs = gss_kerberos_pfs,
- .gm_upcall_enctypes = "18,17,16,23,3,1,2",
+ .gm_upcall_enctypes = KRB5_SUPPORTED_ENCTYPES,
};
static int __init init_kerberos_module(void)
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index b84d739..8c91415 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1061,7 +1061,7 @@
dprintk("RPC: %5u rpc_buffer allocation failed\n", task->tk_pid);
- if (RPC_IS_ASYNC(task) || !signalled()) {
+ if (RPC_IS_ASYNC(task) || !fatal_signal_pending(current)) {
task->tk_action = call_allocate;
rpc_delay(task, HZ>>4);
return;
@@ -1175,6 +1175,9 @@
status = -EOPNOTSUPP;
break;
}
+ if (task->tk_rebind_retry == 0)
+ break;
+ task->tk_rebind_retry--;
rpc_delay(task, 3*HZ);
goto retry_timeout;
case -ETIMEDOUT:
diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c
index 9a80a92..e45d2fb 100644
--- a/net/sunrpc/rpcb_clnt.c
+++ b/net/sunrpc/rpcb_clnt.c
@@ -597,7 +597,7 @@
u32 bind_version;
struct rpc_xprt *xprt;
struct rpc_clnt *rpcb_clnt;
- static struct rpcbind_args *map;
+ struct rpcbind_args *map;
struct rpc_task *child;
struct sockaddr_storage addr;
struct sockaddr *sap = (struct sockaddr *)&addr;
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 6b43ee7..4814e24 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -616,30 +616,25 @@
BUG_ON(RPC_IS_QUEUED(task));
for (;;) {
+ void (*do_action)(struct rpc_task *);
/*
- * Execute any pending callback.
+ * Execute any pending callback first.
*/
- if (task->tk_callback) {
- void (*save_callback)(struct rpc_task *);
-
- /*
- * We set tk_callback to NULL before calling it,
- * in case it sets the tk_callback field itself:
- */
- save_callback = task->tk_callback;
- task->tk_callback = NULL;
- save_callback(task);
- } else {
+ do_action = task->tk_callback;
+ task->tk_callback = NULL;
+ if (do_action == NULL) {
/*
* Perform the next FSM step.
- * tk_action may be NULL when the task has been killed
- * by someone else.
+ * tk_action may be NULL if the task has been killed.
+ * In particular, note that rpc_killall_tasks may
+ * do this at any time, so beware when dereferencing.
*/
- if (task->tk_action == NULL)
+ do_action = task->tk_action;
+ if (do_action == NULL)
break;
- task->tk_action(task);
}
+ do_action(task);
/*
* Lockless check for whether task is sleeping or not.
@@ -792,6 +787,7 @@
/* Initialize retry counters */
task->tk_garb_retry = 2;
task->tk_cred_retry = 2;
+ task->tk_rebind_retry = 2;
task->tk_priority = task_setup_data->priority - RPC_PRIORITY_LOW;
task->tk_owner = current->tgid;
diff --git a/net/wireless/core.c b/net/wireless/core.c
index c22ef34..880dbe2 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -366,6 +366,7 @@
mutex_init(&rdev->mtx);
mutex_init(&rdev->devlist_mtx);
+ mutex_init(&rdev->sched_scan_mtx);
INIT_LIST_HEAD(&rdev->netdev_list);
spin_lock_init(&rdev->bss_lock);
INIT_LIST_HEAD(&rdev->bss_list);
@@ -701,6 +702,7 @@
rfkill_destroy(rdev->rfkill);
mutex_destroy(&rdev->mtx);
mutex_destroy(&rdev->devlist_mtx);
+ mutex_destroy(&rdev->sched_scan_mtx);
list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list)
cfg80211_put_bss(&scan->pub);
cfg80211_rdev_free_wowlan(rdev);
@@ -737,12 +739,16 @@
___cfg80211_scan_done(rdev, true);
}
+ cfg80211_unlock_rdev(rdev);
+
+ mutex_lock(&rdev->sched_scan_mtx);
+
if (WARN_ON(rdev->sched_scan_req &&
rdev->sched_scan_req->dev == wdev->netdev)) {
__cfg80211_stop_sched_scan(rdev, false);
}
- cfg80211_unlock_rdev(rdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
mutex_lock(&rdev->devlist_mtx);
rdev->opencount--;
@@ -830,9 +836,9 @@
break;
case NL80211_IFTYPE_P2P_CLIENT:
case NL80211_IFTYPE_STATION:
- cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
__cfg80211_stop_sched_scan(rdev, false);
- cfg80211_unlock_rdev(rdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
wdev_lock(wdev);
#ifdef CONFIG_CFG80211_WEXT
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 3dce1f1..a570ff9 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -65,6 +65,8 @@
struct work_struct scan_done_wk;
struct work_struct sched_scan_results_wk;
+ struct mutex sched_scan_mtx;
+
#ifdef CONFIG_NL80211_TESTMODE
struct genl_info *testmode_info;
#endif
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 88a565f..cea3381 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3406,11 +3406,11 @@
i = 0;
if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) {
- request->ssids[i].ssid_len = nla_len(attr);
- if (request->ssids[i].ssid_len > IEEE80211_MAX_SSID_LEN) {
+ if (nla_len(attr) > IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
goto out_free;
}
+ request->ssids[i].ssid_len = nla_len(attr);
memcpy(request->ssids[i].ssid, nla_data(attr), nla_len(attr));
i++;
}
@@ -3461,9 +3461,6 @@
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
- if (rdev->sched_scan_req)
- return -EINPROGRESS;
-
if (!info->attrs[NL80211_ATTR_SCHED_SCAN_INTERVAL])
return -EINVAL;
@@ -3502,12 +3499,21 @@
if (ie_len > wiphy->max_scan_ie_len)
return -EINVAL;
+ mutex_lock(&rdev->sched_scan_mtx);
+
+ if (rdev->sched_scan_req) {
+ err = -EINPROGRESS;
+ goto out;
+ }
+
request = kzalloc(sizeof(*request)
+ sizeof(*request->ssids) * n_ssids
+ sizeof(*request->channels) * n_channels
+ ie_len, GFP_KERNEL);
- if (!request)
- return -ENOMEM;
+ if (!request) {
+ err = -ENOMEM;
+ goto out;
+ }
if (n_ssids)
request->ssids = (void *)&request->channels[n_channels];
@@ -3572,12 +3578,11 @@
if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS],
tmp) {
- request->ssids[i].ssid_len = nla_len(attr);
- if (request->ssids[i].ssid_len >
- IEEE80211_MAX_SSID_LEN) {
+ if (nla_len(attr) > IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
goto out_free;
}
+ request->ssids[i].ssid_len = nla_len(attr);
memcpy(request->ssids[i].ssid, nla_data(attr),
nla_len(attr));
i++;
@@ -3606,6 +3611,7 @@
out_free:
kfree(request);
out:
+ mutex_unlock(&rdev->sched_scan_mtx);
return err;
}
@@ -3613,12 +3619,17 @@
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ int err;
if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) ||
!rdev->ops->sched_scan_stop)
return -EOPNOTSUPP;
- return __cfg80211_stop_sched_scan(rdev, false);
+ mutex_lock(&rdev->sched_scan_mtx);
+ err = __cfg80211_stop_sched_scan(rdev, false);
+ mutex_unlock(&rdev->sched_scan_mtx);
+
+ return err;
}
static int nl80211_send_bss(struct sk_buff *msg, u32 pid, u32 seq, int flags,
@@ -6464,7 +6475,8 @@
if (addr)
NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, addr);
NLA_PUT_U32(msg, NL80211_ATTR_KEY_TYPE, key_type);
- NLA_PUT_U8(msg, NL80211_ATTR_KEY_IDX, key_id);
+ if (key_id != -1)
+ NLA_PUT_U8(msg, NL80211_ATTR_KEY_IDX, key_id);
if (tsc)
NLA_PUT(msg, NL80211_ATTR_KEY_SEQ, 6, tsc);
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 7a6c676..ae0c225 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -100,14 +100,14 @@
rdev = container_of(wk, struct cfg80211_registered_device,
sched_scan_results_wk);
- cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
/* we don't have sched_scan_req anymore if the scan is stopping */
if (rdev->sched_scan_req)
nl80211_send_sched_scan_results(rdev,
rdev->sched_scan_req->dev);
- cfg80211_unlock_rdev(rdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
}
void cfg80211_sched_scan_results(struct wiphy *wiphy)
@@ -123,9 +123,9 @@
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
- cfg80211_lock_rdev(rdev);
+ mutex_lock(&rdev->sched_scan_mtx);
__cfg80211_stop_sched_scan(rdev, true);
- cfg80211_unlock_rdev(rdev);
+ mutex_unlock(&rdev->sched_scan_mtx);
}
EXPORT_SYMBOL(cfg80211_sched_scan_stopped);
@@ -135,7 +135,7 @@
int err;
struct net_device *dev;
- ASSERT_RDEV_LOCK(rdev);
+ lockdep_assert_held(&rdev->sched_scan_mtx);
if (!rdev->sched_scan_req)
return 0;
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 9bec2e8..5ce74a3 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -50,7 +50,7 @@
static void xfrm_policy_put_afinfo(struct xfrm_policy_afinfo *afinfo);
static void xfrm_init_pmtu(struct dst_entry *dst);
static int stale_bundle(struct dst_entry *dst);
-static int xfrm_bundle_ok(struct xfrm_dst *xdst, int family);
+static int xfrm_bundle_ok(struct xfrm_dst *xdst);
static struct xfrm_policy *__xfrm_policy_unlink(struct xfrm_policy *pol,
@@ -2241,7 +2241,7 @@
static int stale_bundle(struct dst_entry *dst)
{
- return !xfrm_bundle_ok((struct xfrm_dst *)dst, AF_UNSPEC);
+ return !xfrm_bundle_ok((struct xfrm_dst *)dst);
}
void xfrm_dst_ifdown(struct dst_entry *dst, struct net_device *dev)
@@ -2313,7 +2313,7 @@
* still valid.
*/
-static int xfrm_bundle_ok(struct xfrm_dst *first, int family)
+static int xfrm_bundle_ok(struct xfrm_dst *first)
{
struct dst_entry *dst = &first->u.dst;
struct xfrm_dst *last;
diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c
index 47f1b86..b11ea69 100644
--- a/net/xfrm/xfrm_replay.c
+++ b/net/xfrm/xfrm_replay.c
@@ -265,7 +265,7 @@
bitnr = bitnr & 0x1F;
replay_esn->bmp[nr] |= (1U << bitnr);
} else {
- nr = replay_esn->replay_window >> 5;
+ nr = (replay_esn->replay_window - 1) >> 5;
for (i = 0; i <= nr; i++)
replay_esn->bmp[i] = 0;
@@ -471,7 +471,7 @@
bitnr = bitnr & 0x1F;
replay_esn->bmp[nr] |= (1U << bitnr);
} else {
- nr = replay_esn->replay_window >> 5;
+ nr = (replay_esn->replay_window - 1) >> 5;
for (i = 0; i <= nr; i++)
replay_esn->bmp[i] = 0;
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index d70f85e..9414b9c 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1345,6 +1345,8 @@
xfrm_state_check_expire(x1);
err = 0;
+ x->km.state = XFRM_STATE_DEAD;
+ __xfrm_state_put(x);
}
spin_unlock_bh(&x1->lock);
diff --git a/scripts/Makefile.asm-generic b/scripts/Makefile.asm-generic
index 490122c..40caf3c 100644
--- a/scripts/Makefile.asm-generic
+++ b/scripts/Makefile.asm-generic
@@ -17,6 +17,7 @@
cmd_wrap = echo "\#include <asm-generic/$*.h>" >$@
all: $(patsubst %, $(obj)/%, $(generic-y))
+ @:
$(obj)/%.h:
$(call cmd,wrap)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 8657f99..b0aa2c6 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1943,6 +1943,11 @@
WARN("LINUX_VERSION_CODE should be avoided, code should be for the version to which it is merged\n" . $herecurr);
}
+# check for uses of printk_ratelimit
+ if ($line =~ /\bprintk_ratelimit\s*\(/) {
+ WARN("Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit\n" . $herecurr);
+ }
+
# printk should use KERN_* levels. Note that follow on printk's on the
# same line do not need a level, so we use the current block context
# to try and find and validate the current printk. In summary the current
diff --git a/scripts/depmod.sh b/scripts/depmod.sh
new file mode 100755
index 0000000..a272356
--- /dev/null
+++ b/scripts/depmod.sh
@@ -0,0 +1,50 @@
+#!/bin/sh
+#
+# A depmod wrapper used by the toplevel Makefile
+
+if test $# -ne 2; then
+ echo "Usage: $0 /sbin/depmod <kernelrelease>" >&2
+ exit 1
+fi
+DEPMOD=$1
+KERNELRELEASE=$2
+
+if ! "$DEPMOD" -V 2>/dev/null | grep -q module-init-tools; then
+ echo "Warning: you may need to install module-init-tools" >&2
+ echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt" >&2
+ sleep 1
+fi
+
+if ! test -r System.map -a -x "$DEPMOD"; then
+ exit 0
+fi
+# older versions of depmod require the version string to start with three
+# numbers, so we cheat with a symlink here
+depmod_hack_needed=true
+tmp_dir=$(mktemp -d ${TMPDIR:-/tmp}/depmod.XXXXXX)
+mkdir -p "$tmp_dir/lib/modules/$KERNELRELEASE"
+if "$DEPMOD" -b "$tmp_dir" $KERNELRELEASE 2>/dev/null; then
+ if test -e "$tmp_dir/lib/modules/$KERNELRELEASE/modules.dep" -o \
+ -e "$tmp_dir/lib/modules/$KERNELRELEASE/modules.dep.bin"; then
+ depmod_hack_needed=false
+ fi
+fi
+rm -rf "$tmp_dir"
+if $depmod_hack_needed; then
+ symlink="$INSTALL_MOD_PATH/lib/modules/99.98.$KERNELRELEASE"
+ ln -s "$KERNELRELEASE" "$symlink"
+ KERNELRELEASE=99.98.$KERNELRELEASE
+fi
+
+set -- -ae -F System.map
+if test -n "$INSTALL_MOD_PATH"; then
+ set -- "$@" -b "$INSTALL_MOD_PATH"
+fi
+"$DEPMOD" "$@" "$KERNELRELEASE"
+ret=$?
+
+if $depmod_hack_needed; then
+ rm -f "$symlink"
+fi
+
+exit $ret
diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
index ec1bcec..3d2fd14 100644
--- a/security/apparmor/lsm.c
+++ b/security/apparmor/lsm.c
@@ -612,7 +612,7 @@
static int apparmor_task_setrlimit(struct task_struct *task,
unsigned int resource, struct rlimit *new_rlim)
{
- struct aa_profile *profile = aa_current_profile();
+ struct aa_profile *profile = __aa_current_profile();
int error = 0;
if (!unconfined(profile))
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index cd1f779..1be6826 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -474,17 +474,11 @@
.subsys_id = devices_subsys_id,
};
-int devcgroup_inode_permission(struct inode *inode, int mask)
+int __devcgroup_inode_permission(struct inode *inode, int mask)
{
struct dev_cgroup *dev_cgroup;
struct dev_whitelist_item *wh;
- dev_t device = inode->i_rdev;
- if (!device)
- return 0;
- if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
- return 0;
-
rcu_read_lock();
dev_cgroup = task_devcgroup(current);
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index d31862e..8246532 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -71,9 +71,8 @@
* This is called in context of freshly forked kthread before kernel_execve(),
* so we can simply install the desired session_keyring at this point.
*/
-static int umh_keys_init(struct subprocess_info *info)
+static int umh_keys_init(struct subprocess_info *info, struct cred *cred)
{
- struct cred *cred = (struct cred*)current_cred();
struct key *keyring = info->data;
return install_session_keyring_to_cred(cred, keyring);
@@ -470,7 +469,7 @@
} else if (ret == -EINPROGRESS) {
ret = 0;
} else {
- key = ERR_PTR(ret);
+ goto couldnt_alloc_key;
}
key_put(dest_keyring);
@@ -480,6 +479,7 @@
construction_failed:
key_negate_and_link(key, key_negative_timeout, NULL, NULL);
key_put(key);
+couldnt_alloc_key:
key_put(dest_keyring);
kleave(" = %d", ret);
return ERR_PTR(ret);
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index a0d3845..20219ef 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1476,7 +1476,6 @@
unsigned flags)
{
struct inode_security_struct *isec;
- struct common_audit_data ad;
u32 sid;
validate_creds(cred);
@@ -1487,15 +1486,21 @@
sid = cred_sid(cred);
isec = inode->i_security;
- if (!adp) {
- adp = &ad;
- COMMON_AUDIT_DATA_INIT(&ad, INODE);
- ad.u.inode = inode;
- }
-
return avc_has_perm_flags(sid, isec->sid, isec->sclass, perms, adp, flags);
}
+static int inode_has_perm_noadp(const struct cred *cred,
+ struct inode *inode,
+ u32 perms,
+ unsigned flags)
+{
+ struct common_audit_data ad;
+
+ COMMON_AUDIT_DATA_INIT(&ad, INODE);
+ ad.u.inode = inode;
+ return inode_has_perm(cred, inode, perms, &ad, flags);
+}
+
/* Same as inode_has_perm, but pass explicit audit data containing
the dentry to help the auditing code to more easily generate the
pathname if needed. */
@@ -2122,8 +2127,8 @@
struct tty_file_private, list);
file = file_priv->file;
inode = file->f_path.dentry->d_inode;
- if (inode_has_perm(cred, inode,
- FILE__READ | FILE__WRITE, NULL, 0)) {
+ if (inode_has_perm_noadp(cred, inode,
+ FILE__READ | FILE__WRITE, 0)) {
drop_tty = 1;
}
}
@@ -3228,7 +3233,7 @@
* new inode label or new policy.
* This check is not redundant - do not remove.
*/
- return inode_has_perm(cred, inode, open_file_to_av(file), NULL, 0);
+ return inode_has_perm_noadp(cred, inode, open_file_to_av(file), 0);
}
/* task security operations */
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 77d4413..3545934 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -29,6 +29,7 @@
#include <linux/audit.h>
#include <linux/uaccess.h>
#include <linux/kobject.h>
+#include <linux/ctype.h>
/* selinuxfs pseudo filesystem for exporting the security policy API.
Based on the proc code and the fs/nfsd/nfsctl.c code. */
@@ -751,6 +752,14 @@
return length;
}
+static inline int hexcode_to_int(int code) {
+ if (code == '\0' || !isxdigit(code))
+ return -1;
+ if (isdigit(code))
+ return code - '0';
+ return tolower(code) - 'a' + 10;
+}
+
static ssize_t sel_write_create(struct file *file, char *buf, size_t size)
{
char *scon = NULL, *tcon = NULL;
@@ -785,8 +794,34 @@
nargs = sscanf(buf, "%s %s %hu %s", scon, tcon, &tclass, namebuf);
if (nargs < 3 || nargs > 4)
goto out;
- if (nargs == 4)
+ if (nargs == 4) {
+ /*
+ * If and when the name of new object to be queried contains
+ * either whitespace or multibyte characters, they shall be
+ * encoded based on the percentage-encoding rule.
+ * If not encoded, the sscanf logic picks up only left-half
+ * of the supplied name; splitted by a whitespace unexpectedly.
+ */
+ char *r, *w;
+ int c1, c2;
+
+ r = w = namebuf;
+ do {
+ c1 = *r++;
+ if (c1 == '+')
+ c1 = ' ';
+ else if (c1 == '%') {
+ if ((c1 = hexcode_to_int(*r++)) < 0)
+ goto out;
+ if ((c2 = hexcode_to_int(*r++)) < 0)
+ goto out;
+ c1 = (c1 << 4) | c2;
+ }
+ *w++ = c1;
+ } while (c1 != '\0');
+
objname = namebuf;
+ }
length = security_context_to_sid(scon, strlen(scon) + 1, &ssid);
if (length)
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index 102e9ec..d246aca 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -3222,6 +3222,9 @@
__le32 buf[1];
int rc;
+ if (p->policyvers < POLICYDB_VERSION_FILENAME_TRANS)
+ return 0;
+
nel = 0;
rc = hashtab_map(p->filename_trans, hashtab_cnt, &nel);
if (rc)
diff --git a/security/tomoyo/mount.c b/security/tomoyo/mount.c
index 162a864..9fc2e15 100644
--- a/security/tomoyo/mount.c
+++ b/security/tomoyo/mount.c
@@ -138,7 +138,7 @@
}
if (need_dev) {
/* Get mount point or device file. */
- if (kern_path(dev_name, LOOKUP_FOLLOW, &path)) {
+ if (!dev_name || kern_path(dev_name, LOOKUP_FOLLOW, &path)) {
error = -ENOENT;
goto out;
}
diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c
index 6e24091..bfee60c 100644
--- a/sound/atmel/abdac.c
+++ b/sound/atmel/abdac.c
@@ -599,4 +599,4 @@
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Driver for Atmel Audio Bitstream DAC (ABDAC)");
-MODULE_AUTHOR("Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>");
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c
index b310702..ac35222 100644
--- a/sound/atmel/ac97c.c
+++ b/sound/atmel/ac97c.c
@@ -1199,4 +1199,4 @@
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Driver for Atmel AC97 controller");
-MODULE_AUTHOR("Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>");
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
diff --git a/sound/core/misc.c b/sound/core/misc.c
index 2c41825..eb9fe2e 100644
--- a/sound/core/misc.c
+++ b/sound/core/misc.c
@@ -58,26 +58,6 @@
else
return path;
}
-
-/* print file and line with a certain printk prefix */
-static int print_snd_pfx(unsigned int level, const char *path, int line,
- const char *format)
-{
- const char *file = sanity_file_name(path);
- char tmp[] = "<0>";
- const char *pfx = level ? KERN_DEBUG : KERN_DEFAULT;
- int ret = 0;
-
- if (format[0] == '<' && format[2] == '>') {
- tmp[1] = format[1];
- pfx = tmp;
- ret = 1;
- }
- printk("%sALSA %s:%d: ", pfx, file, line);
- return ret;
-}
-#else
-#define print_snd_pfx(level, path, line, format) 0
#endif
#if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
@@ -85,15 +65,29 @@
const char *format, ...)
{
va_list args;
-
+#ifdef CONFIG_SND_VERBOSE_PRINTK
+ struct va_format vaf;
+ char verbose_fmt[] = KERN_DEFAULT "ALSA %s:%d %pV";
+#endif
+
#ifdef CONFIG_SND_DEBUG
if (debug < level)
return;
#endif
+
va_start(args, format);
- if (print_snd_pfx(level, path, line, format))
- format += 3; /* skip the printk level-prefix */
+#ifdef CONFIG_SND_VERBOSE_PRINTK
+ vaf.fmt = format;
+ vaf.va = &args;
+ if (format[0] == '<' && format[2] == '>') {
+ memcpy(verbose_fmt, format, 3);
+ vaf.fmt = format + 3;
+ } else if (level)
+ memcpy(verbose_fmt, KERN_DEBUG, 3);
+ printk(verbose_fmt, sanity_file_name(path), line, &vaf);
+#else
vprintk(format, args);
+#endif
va_end(args);
}
EXPORT_SYMBOL_GPL(__snd_printk);
diff --git a/sound/firewire/isight.c b/sound/firewire/isight.c
index 86ee16c..4400308 100644
--- a/sound/firewire/isight.c
+++ b/sound/firewire/isight.c
@@ -209,6 +209,7 @@
isight->packet_index = -1;
return;
}
+ fw_iso_context_queue_flush(isight->context);
if (++index >= QUEUE_LENGTH)
index = 0;
diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index 2ca6f4f..e3569bd 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -27,7 +27,6 @@
#include "hpioctl.h"
#include <linux/pci.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/slab.h>
diff --git a/sound/pci/cs5535audio/cs5535audio_pcm.c b/sound/pci/cs5535audio/cs5535audio_pcm.c
index f16bc8a..e083122 100644
--- a/sound/pci/cs5535audio/cs5535audio_pcm.c
+++ b/sound/pci/cs5535audio/cs5535audio_pcm.c
@@ -149,7 +149,7 @@
&((struct cs5535audio_dma_desc *) dma->desc_buf.area)[i];
desc->addr = cpu_to_le32(addr);
desc->size = cpu_to_le32(period_bytes);
- desc->ctlreserved = cpu_to_le32(PRD_EOP);
+ desc->ctlreserved = cpu_to_le16(PRD_EOP);
desc_addr += sizeof(struct cs5535audio_dma_desc);
addr += period_bytes;
}
@@ -157,7 +157,7 @@
lastdesc = &((struct cs5535audio_dma_desc *) dma->desc_buf.area)[periods];
lastdesc->addr = cpu_to_le32((u32) dma->desc_buf.addr);
lastdesc->size = 0;
- lastdesc->ctlreserved = cpu_to_le32(PRD_JMP);
+ lastdesc->ctlreserved = cpu_to_le16(PRD_JMP);
jmpprd_addr = cpu_to_le32(lastdesc->addr +
(sizeof(struct cs5535audio_dma_desc)*periods));
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index 5e619a8..15f0161 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -1440,6 +1440,14 @@
.ca0102_chip = 1,
.spk71 = 1,
.emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 */
+ /* EMU0404 PCIe */
+ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40051102,
+ .driver = "Audigy2", .name = "E-mu 0404 PCIe [MAEM8984]",
+ .id = "EMU0404",
+ .emu10k2_chip = 1,
+ .ca0108_chip = 1,
+ .spk71 = 1,
+ .emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 PCIe ver_03 */
/* Note that all E-mu cards require kernel 2.6 or newer. */
{.vendor = 0x1102, .device = 0x0008,
.driver = "Audigy2", .name = "SB Audigy 2 Value [Unknown]",
diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h
index f1de1ba..55f0647 100644
--- a/sound/pci/hda/hda_beep.h
+++ b/sound/pci/hda/hda_beep.h
@@ -50,7 +50,12 @@
int snd_hda_attach_beep_device(struct hda_codec *codec, int nid);
void snd_hda_detach_beep_device(struct hda_codec *codec);
#else
-#define snd_hda_attach_beep_device(...) 0
-#define snd_hda_detach_beep_device(...)
+static inline int snd_hda_attach_beep_device(struct hda_codec *codec, int nid)
+{
+ return 0;
+}
+static inline void snd_hda_detach_beep_device(struct hda_codec *codec)
+{
+}
#endif
#endif
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index b05f7be..e3e8531 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -294,7 +294,7 @@
snd_printd(KERN_INFO "HDMI: out of range MNL %d\n", mnl);
goto out_fail;
} else
- strlcpy(e->monitor_name, buf + ELD_FIXED_BYTES, mnl);
+ strlcpy(e->monitor_name, buf + ELD_FIXED_BYTES, mnl + 1);
for (i = 0; i < e->sad_count; i++) {
if (ELD_FIXED_BYTES + mnl + 3 * (i + 1) > size) {
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 3e6b9a8..7bbc5f2 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3074,6 +3074,7 @@
};
static const struct snd_pci_quirk cxt5066_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT5066_AUTO),
SND_PCI_QUIRK_MASK(0x1025, 0xff00, 0x0400, "Acer", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1028, 0x02d8, "Dell Vostro", CXT5066_DELL_VOSTRO),
SND_PCI_QUIRK(0x1028, 0x02f5, "Dell Vostro 320", CXT5066_IDEAPAD),
@@ -3102,6 +3103,7 @@
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS),
SND_PCI_QUIRK(0x17aa, 0x3938, "Lenovo G565", CXT5066_AUTO),
SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT5066_IDEAPAD), /* Fallback for Lenovos without dock mic */
+ SND_PCI_QUIRK(0x1b0a, 0x2092, "CyberpowerPC Gamer Xplorer N57001", CXT5066_AUTO),
{}
};
@@ -4388,6 +4390,8 @@
.patch = patch_cxt5066 },
{ .id = 0x14f15069, .name = "CX20585",
.patch = patch_cxt5066 },
+ { .id = 0x14f1506c, .name = "CX20588",
+ .patch = patch_cxt5066 },
{ .id = 0x14f1506e, .name = "CX20590",
.patch = patch_cxt5066 },
{ .id = 0x14f15097, .name = "CX20631",
@@ -4416,6 +4420,7 @@
MODULE_ALIAS("snd-hda-codec-id:14f15067");
MODULE_ALIAS("snd-hda-codec-id:14f15068");
MODULE_ALIAS("snd-hda-codec-id:14f15069");
+MODULE_ALIAS("snd-hda-codec-id:14f1506c");
MODULE_ALIAS("snd-hda-codec-id:14f1506e");
MODULE_ALIAS("snd-hda-codec-id:14f15097");
MODULE_ALIAS("snd-hda-codec-id:14f15098");
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 7a4e100..b48fb43 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1141,6 +1141,13 @@
struct alc_spec *spec = codec->spec;
int on;
+ /* Control HP pins/amps depending on master_mute state;
+ * in general, HP pins/amps control should be enabled in all cases,
+ * but currently set only for master_mute, just to be safe
+ */
+ do_automute(codec, ARRAY_SIZE(spec->autocfg.hp_pins),
+ spec->autocfg.hp_pins, spec->master_mute, true);
+
if (!spec->automute)
on = 0;
else
@@ -2708,17 +2715,30 @@
static int alc_cap_getput_caller(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol,
- getput_call_t func)
+ getput_call_t func, bool check_adc_switch)
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
- unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
- int err;
+ int i, err = 0;
mutex_lock(&codec->control_mutex);
- kcontrol->private_value = HDA_COMPOSE_AMP_VAL(spec->adc_nids[adc_idx],
- 3, 0, HDA_INPUT);
- err = func(kcontrol, ucontrol);
+ if (check_adc_switch && spec->dual_adc_switch) {
+ for (i = 0; i < spec->num_adc_nids; i++) {
+ kcontrol->private_value =
+ HDA_COMPOSE_AMP_VAL(spec->adc_nids[i],
+ 3, 0, HDA_INPUT);
+ err = func(kcontrol, ucontrol);
+ if (err < 0)
+ goto error;
+ }
+ } else {
+ i = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+ kcontrol->private_value =
+ HDA_COMPOSE_AMP_VAL(spec->adc_nids[i],
+ 3, 0, HDA_INPUT);
+ err = func(kcontrol, ucontrol);
+ }
+ error:
mutex_unlock(&codec->control_mutex);
return err;
}
@@ -2727,14 +2747,14 @@
struct snd_ctl_elem_value *ucontrol)
{
return alc_cap_getput_caller(kcontrol, ucontrol,
- snd_hda_mixer_amp_volume_get);
+ snd_hda_mixer_amp_volume_get, false);
}
static int alc_cap_vol_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
return alc_cap_getput_caller(kcontrol, ucontrol,
- snd_hda_mixer_amp_volume_put);
+ snd_hda_mixer_amp_volume_put, true);
}
/* capture mixer elements */
@@ -2744,14 +2764,14 @@
struct snd_ctl_elem_value *ucontrol)
{
return alc_cap_getput_caller(kcontrol, ucontrol,
- snd_hda_mixer_amp_switch_get);
+ snd_hda_mixer_amp_switch_get, false);
}
static int alc_cap_sw_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
return alc_cap_getput_caller(kcontrol, ucontrol,
- snd_hda_mixer_amp_switch_put);
+ snd_hda_mixer_amp_switch_put, true);
}
#define _DEFINE_CAPMIX(num) \
@@ -4876,7 +4896,6 @@
SND_PCI_QUIRK(0x1025, 0xe309, "ULI", ALC880_3ST_DIG),
SND_PCI_QUIRK(0x1025, 0xe310, "ULI", ALC880_3ST),
SND_PCI_QUIRK(0x1039, 0x1234, NULL, ALC880_6ST_DIG),
- SND_PCI_QUIRK(0x103c, 0x2a09, "HP", ALC880_5ST),
SND_PCI_QUIRK(0x1043, 0x10b3, "ASUS W1V", ALC880_ASUS_W1V),
SND_PCI_QUIRK(0x1043, 0x10c2, "ASUS W6A", ALC880_ASUS_DIG),
SND_PCI_QUIRK(0x1043, 0x10c3, "ASUS Wxx", ALC880_ASUS_DIG),
@@ -6201,11 +6220,6 @@
/* update HP, line and mono out pins according to the master switch */
static void alc260_hp_master_update(struct hda_codec *codec)
{
- struct alc_spec *spec = codec->spec;
-
- /* change HP pins */
- do_automute(codec, ARRAY_SIZE(spec->autocfg.hp_pins),
- spec->autocfg.hp_pins, spec->master_mute, true);
update_speakers(codec);
}
@@ -11924,7 +11938,7 @@
* 0x1b = port replicator headphone out
*/
-#define ALC_HP_EVENT 0x37
+#define ALC_HP_EVENT ALC880_HP_EVENT
static const struct hda_verb alc262_fujitsu_unsol_verbs[] = {
{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
@@ -12598,6 +12612,7 @@
*/
enum {
PINFIX_FSC_H270,
+ PINFIX_HP_Z200,
};
static const struct alc_fixup alc262_fixups[] = {
@@ -12610,9 +12625,17 @@
{ }
}
},
+ [PINFIX_HP_Z200] = {
+ .type = ALC_FIXUP_PINS,
+ .v.pins = (const struct alc_pincfg[]) {
+ { 0x16, 0x99130120 }, /* internal speaker */
+ { }
+ }
+ },
};
static const struct snd_pci_quirk alc262_fixup_tbl[] = {
+ SND_PCI_QUIRK(0x103c, 0x170b, "HP Z200", PINFIX_HP_Z200),
SND_PCI_QUIRK(0x1734, 0x1147, "FSC Celsius H270", PINFIX_FSC_H270),
{}
};
@@ -12729,6 +12752,8 @@
ALC262_HP_BPC),
SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1500, "HP z series",
ALC262_HP_BPC),
+ SND_PCI_QUIRK(0x103c, 0x170b, "HP Z200",
+ ALC262_AUTO),
SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x1700, "HP xw series",
ALC262_HP_BPC),
SND_PCI_QUIRK(0x103c, 0x2800, "HP D7000", ALC262_HP_BPC_D7000_WL),
@@ -13314,9 +13339,8 @@
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x15;
spec->autocfg.speaker_pins[0] = 0x14;
- spec->automute_mixer_nid[0] = 0x0f;
spec->automute = 1;
- spec->automute_mode = ALC_AUTOMUTE_MIXER;
+ spec->automute_mode = ALC_AUTOMUTE_AMP;
spec->ext_mic.pin = 0x18;
spec->ext_mic.mux_idx = 0;
spec->int_mic.pin = 0x12;
@@ -13860,6 +13884,7 @@
SND_PCI_QUIRK(0x1025, 0x015b, "Acer Aspire One",
ALC268_ACER_ASPIRE_ONE),
SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
+ SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron 910", ALC268_AUTO),
SND_PCI_QUIRK_MASK(0x1028, 0xfff0, 0x02b0,
"Dell Inspiron Mini9/Vostro A90", ALC268_DELL),
/* almost compatible with toshiba but with optional digital outs;
@@ -13870,7 +13895,6 @@
SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
- SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
{}
};
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 605c99e..f43bb0e 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -745,12 +745,23 @@
struct via_spec *spec = codec->spec;
hda_nid_t nid = kcontrol->private_value;
unsigned int pinsel = ucontrol->value.enumerated.item[0];
+ unsigned int parm0, parm1;
/* Get Independent Mode index of headphone pin widget */
spec->hp_independent_mode = spec->hp_independent_mode_index == pinsel
? 1 : 0;
- if (spec->codec_type == VT1718S)
+ if (spec->codec_type == VT1718S) {
snd_hda_codec_write(codec, nid, 0,
AC_VERB_SET_CONNECT_SEL, pinsel ? 2 : 0);
+ /* Set correct mute switch for MW3 */
+ parm0 = spec->hp_independent_mode ?
+ AMP_IN_UNMUTE(0) : AMP_IN_MUTE(0);
+ parm1 = spec->hp_independent_mode ?
+ AMP_IN_MUTE(1) : AMP_IN_UNMUTE(1);
+ snd_hda_codec_write(codec, 0x1b, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, parm0);
+ snd_hda_codec_write(codec, 0x1b, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, parm1);
+ }
else
snd_hda_codec_write(codec, nid, 0,
AC_VERB_SET_CONNECT_SEL, pinsel);
@@ -832,10 +843,13 @@
knew->subdevice = HDA_SUBDEV_NID_FLAG | nid;
knew->private_value = nid;
- knew = via_clone_control(spec, &via_hp_mixer[1]);
- if (knew == NULL)
- return -ENOMEM;
- knew->subdevice = side_mute_channel(spec);
+ nid = side_mute_channel(spec);
+ if (nid) {
+ knew = via_clone_control(spec, &via_hp_mixer[1]);
+ if (knew == NULL)
+ return -ENOMEM;
+ knew->subdevice = nid;
+ }
return 0;
}
@@ -4280,9 +4294,6 @@
{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5)},
-
- /* Setup default input of Front HP to MW9 */
- {0x28, AC_VERB_SET_CONNECT_SEL, 0x1},
/* PW9 PW10 Output enable */
{0x2d, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_OUT_EN},
{0x2e, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_OUT_EN},
@@ -4291,10 +4302,10 @@
/* Enable Boost Volume backdoor */
{0x1, 0xf88, 0x8},
/* MW0/1/2/3/4: un-mute index 0 (AOWx), mute index 1 (MW9) */
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
@@ -4304,8 +4315,6 @@
/* set MUX1 = 2 (AOW4), MUX2 = 1 (AOW3) */
{0x34, AC_VERB_SET_CONNECT_SEL, 0x2},
{0x35, AC_VERB_SET_CONNECT_SEL, 0x1},
- /* Unmute MW4's index 0 */
- {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{ }
};
@@ -4453,6 +4462,19 @@
if (err < 0)
return err;
} else if (i == AUTO_SEQ_FRONT) {
+ /* add control to mixer index 0 */
+ err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
+ "Master Front Playback Volume",
+ HDA_COMPOSE_AMP_VAL(0x21, 3, 5,
+ HDA_INPUT));
+ if (err < 0)
+ return err;
+ err = via_add_control(spec, VIA_CTL_WIDGET_MUTE,
+ "Master Front Playback Switch",
+ HDA_COMPOSE_AMP_VAL(0x21, 3, 5,
+ HDA_INPUT));
+ if (err < 0)
+ return err;
/* Front */
sprintf(name, "%s Playback Volume", chname[i]);
err = via_add_control(
diff --git a/sound/pci/lola/lola.c b/sound/pci/lola/lola.c
index 34b2428..2692e5a 100644
--- a/sound/pci/lola/lola.c
+++ b/sound/pci/lola/lola.c
@@ -445,7 +445,7 @@
lola_setup_all_analog_gains(chip, PLAY, false); /* output, update */
}
-static int lola_parse_tree(struct lola *chip)
+static int __devinit lola_parse_tree(struct lola *chip)
{
unsigned int val;
int nid, err;
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 949691a..c8e402f 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -521,6 +521,7 @@
#define HDSPM_DMA_AREA_KILOBYTES (HDSPM_DMA_AREA_BYTES/1024)
/* revisions >= 230 indicate AES32 card */
+#define HDSPM_MADI_OLD_REV 207
#define HDSPM_MADI_REV 210
#define HDSPM_RAYDAT_REV 211
#define HDSPM_AIO_REV 212
@@ -895,11 +896,11 @@
unsigned char max_channels_in;
unsigned char max_channels_out;
- char *channel_map_in;
- char *channel_map_out;
+ signed char *channel_map_in;
+ signed char *channel_map_out;
- char *channel_map_in_ss, *channel_map_in_ds, *channel_map_in_qs;
- char *channel_map_out_ss, *channel_map_out_ds, *channel_map_out_qs;
+ signed char *channel_map_in_ss, *channel_map_in_ds, *channel_map_in_qs;
+ signed char *channel_map_out_ss, *channel_map_out_ds, *channel_map_out_qs;
char **port_names_in;
char **port_names_out;
@@ -1143,7 +1144,7 @@
/* if wordclock has synced freq and wordclock is valid */
if ((status2 & HDSPM_wcLock) != 0 &&
- (status & HDSPM_SelSyncRef0) == 0) {
+ (status2 & HDSPM_SelSyncRef0) == 0) {
rate_bits = status2 & HDSPM_wcFreqMask;
@@ -1639,12 +1640,14 @@
}
}
hmidi->pending = 0;
+ spin_unlock_irqrestore(&hmidi->lock, flags);
+ spin_lock_irqsave(&hmidi->hdspm->lock, flags);
hmidi->hdspm->control_register |= hmidi->ie;
hdspm_write(hmidi->hdspm, HDSPM_controlRegister,
hmidi->hdspm->control_register);
+ spin_unlock_irqrestore(&hmidi->hdspm->lock, flags);
- spin_unlock_irqrestore (&hmidi->lock, flags);
return snd_hdspm_midi_output_write (hmidi);
}
@@ -6377,6 +6380,7 @@
switch (hdspm->firmware_rev) {
case HDSPM_MADI_REV:
+ case HDSPM_MADI_OLD_REV:
hdspm->io_type = MADI;
hdspm->card_name = "RME MADI";
hdspm->midiPorts = 3;
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 7fbfa05..eda955b 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -848,9 +848,10 @@
if (IS_ERR(ssc))
pr_warn("Unable to parent ASoC SSC DAI on SSC: %ld\n",
PTR_ERR(ssc));
- else
+ else {
ssc_pdev->dev.parent = &(ssc->pdev->dev);
- ssc_free(ssc);
+ ssc_free(ssc);
+ }
ret = platform_device_add(ssc_pdev);
if (ret < 0)
diff --git a/sound/soc/blackfin/bf5xx-ad1836.c b/sound/soc/blackfin/bf5xx-ad1836.c
index ea4951c..f79d165 100644
--- a/sound/soc/blackfin/bf5xx-ad1836.c
+++ b/sound/soc/blackfin/bf5xx-ad1836.c
@@ -75,7 +75,7 @@
.cpu_dai_name = "bfin-tdm.0",
.codec_dai_name = "ad1836-hifi",
.platform_name = "bfin-tdm-pcm-audio",
- .codec_name = "ad1836.0",
+ .codec_name = "spi0.4",
.ops = &bf5xx_ad1836_ops,
},
{
@@ -84,7 +84,7 @@
.cpu_dai_name = "bfin-tdm.1",
.codec_dai_name = "ad1836-hifi",
.platform_name = "bfin-tdm-pcm-audio",
- .codec_name = "ad1836.0",
+ .codec_name = "spi0.4",
.ops = &bf5xx_ad1836_ops,
},
};
diff --git a/sound/soc/blackfin/bf5xx-i2s-pcm.c b/sound/soc/blackfin/bf5xx-i2s-pcm.c
index b5101ef..f1fd95b 100644
--- a/sound/soc/blackfin/bf5xx-i2s-pcm.c
+++ b/sound/soc/blackfin/bf5xx-i2s-pcm.c
@@ -138,11 +138,20 @@
pr_debug("%s enter\n", __func__);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
diff = sport_curr_offset_tx(sport);
- frames = bytes_to_frames(substream->runtime, diff);
} else {
diff = sport_curr_offset_rx(sport);
- frames = bytes_to_frames(substream->runtime, diff);
}
+
+ /*
+ * TX at least can report one frame beyond the end of the
+ * buffer if we hit the wraparound case - clamp to within the
+ * buffer as the ALSA APIs require.
+ */
+ if (diff == snd_pcm_lib_buffer_bytes(substream))
+ diff = 0;
+
+ frames = bytes_to_frames(substream->runtime, diff);
+
return frames;
}
diff --git a/sound/soc/codecs/ad1836.c b/sound/soc/codecs/ad1836.c
index ab63d52..754c496 100644
--- a/sound/soc/codecs/ad1836.c
+++ b/sound/soc/codecs/ad1836.c
@@ -145,22 +145,22 @@
/* bit size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
- word_len = 3;
+ word_len = AD1836_WORD_LEN_16;
break;
case SNDRV_PCM_FORMAT_S20_3LE:
- word_len = 1;
+ word_len = AD1836_WORD_LEN_20;
break;
case SNDRV_PCM_FORMAT_S24_LE:
case SNDRV_PCM_FORMAT_S32_LE:
- word_len = 0;
+ word_len = AD1836_WORD_LEN_24;
break;
}
- snd_soc_update_bits(codec, AD1836_DAC_CTRL1,
- AD1836_DAC_WORD_LEN_MASK, word_len);
+ snd_soc_update_bits(codec, AD1836_DAC_CTRL1, AD1836_DAC_WORD_LEN_MASK,
+ word_len << AD1836_DAC_WORD_LEN_OFFSET);
- snd_soc_update_bits(codec, AD1836_ADC_CTRL2,
- AD1836_ADC_WORD_LEN_MASK, word_len);
+ snd_soc_update_bits(codec, AD1836_ADC_CTRL2, AD1836_ADC_WORD_LEN_MASK,
+ word_len << AD1836_ADC_WORD_OFFSET);
return 0;
}
diff --git a/sound/soc/codecs/ad1836.h b/sound/soc/codecs/ad1836.h
index 8455967..9d6a3f8 100644
--- a/sound/soc/codecs/ad1836.h
+++ b/sound/soc/codecs/ad1836.h
@@ -25,6 +25,7 @@
#define AD1836_DAC_SERFMT_PCK256 (0x4 << 5)
#define AD1836_DAC_SERFMT_PCK128 (0x5 << 5)
#define AD1836_DAC_WORD_LEN_MASK 0x18
+#define AD1836_DAC_WORD_LEN_OFFSET 3
#define AD1836_DAC_CTRL2 1
#define AD1836_DACL1_MUTE 0
@@ -51,6 +52,7 @@
#define AD1836_ADCL2_MUTE 2
#define AD1836_ADCR2_MUTE 3
#define AD1836_ADC_WORD_LEN_MASK 0x30
+#define AD1836_ADC_WORD_OFFSET 5
#define AD1836_ADC_SERFMT_MASK (7 << 6)
#define AD1836_ADC_SERFMT_PCK256 (0x4 << 6)
#define AD1836_ADC_SERFMT_PCK128 (0x5 << 6)
@@ -60,4 +62,8 @@
#define AD1836_NUM_REGS 16
+#define AD1836_WORD_LEN_24 0x0
+#define AD1836_WORD_LEN_20 0x1
+#define AD1836_WORD_LEN_16 0x2
+
#endif
diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c
index 4be0570..65f4604 100644
--- a/sound/soc/codecs/ak4642.c
+++ b/sound/soc/codecs/ak4642.c
@@ -357,7 +357,7 @@
default:
return -EINVAL;
}
- snd_soc_update_bits(codec, PW_MGMT2, MS, data);
+ snd_soc_update_bits(codec, PW_MGMT2, MS | MCKO | PMPLL, data);
snd_soc_update_bits(codec, MD_CTL1, BCKO_MASK, bcko);
/* format type */
diff --git a/sound/soc/codecs/tlv320aic26.c b/sound/soc/codecs/tlv320aic26.c
index e2a7608..7859bdc 100644
--- a/sound/soc/codecs/tlv320aic26.c
+++ b/sound/soc/codecs/tlv320aic26.c
@@ -161,10 +161,18 @@
dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
}
- /* Configure PLL */
+ /**
+ * Configure PLL
+ * fsref = (mclk * PLLM) / 2048
+ * where PLLM = J.DDDD (DDDD register ranges from 0 to 9999, decimal)
+ */
pval = 1;
- jval = (fsref == 44100) ? 7 : 8;
- dval = (fsref == 44100) ? 5264 : 1920;
+ /* compute J portion of multiplier */
+ jval = fsref / (aic26->mclk / 2048);
+ /* compute fractional DDDD component of multiplier */
+ dval = fsref - (jval * (aic26->mclk / 2048));
+ dval = (10000 * dval) / (aic26->mclk / 2048);
+ dev_dbg(&aic26->spi->dev, "Setting PLLM to %d.%04d\n", jval, dval);
qval = 0;
reg = 0x8000 | qval << 11 | pval << 8 | jval << 2;
aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg);
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index c3d96fc..789453d 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1114,12 +1114,19 @@
/* Sync reg_cache with the hardware */
codec->cache_only = 0;
- for (i = 0; i < ARRAY_SIZE(aic3x_reg); i++)
+ for (i = AIC3X_SAMPLE_RATE_SEL_REG; i < ARRAY_SIZE(aic3x_reg); i++)
snd_soc_write(codec, i, cache[i]);
if (aic3x->model == AIC3X_MODEL_3007)
aic3x_init_3007(codec);
codec->cache_sync = 0;
} else {
+ /*
+ * Do soft reset to this codec instance in order to clear
+ * possible VDD leakage currents in case the supply regulators
+ * remain on
+ */
+ snd_soc_write(codec, AIC3X_RESET, SOFT_RESET);
+ codec->cache_sync = 1;
aic3x->power = 0;
/* HW writes are needless when bias is off */
codec->cache_only = 1;
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 2dc964b..76b4361 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -175,6 +175,7 @@
SOC_DAPM_ENUM("Input Select", wm8731_insel_enum);
static const struct snd_soc_dapm_widget wm8731_dapm_widgets[] = {
+SND_SOC_DAPM_SUPPLY("ACTIVE",WM8731_ACTIVE, 0, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("OSC", WM8731_PWR, 5, 1, NULL, 0),
SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1,
&wm8731_output_mixer_controls[0],
@@ -204,6 +205,8 @@
static const struct snd_soc_dapm_route wm8731_intercon[] = {
{"DAC", NULL, "OSC", wm8731_check_osc},
{"ADC", NULL, "OSC", wm8731_check_osc},
+ {"DAC", NULL, "ACTIVE"},
+ {"ADC", NULL, "ACTIVE"},
/* output mixer */
{"Output Mixer", "Line Bypass Switch", "Line Input"},
@@ -315,29 +318,6 @@
return 0;
}
-static int wm8731_pcm_prepare(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_codec *codec = dai->codec;
-
- /* set active */
- snd_soc_write(codec, WM8731_ACTIVE, 0x0001);
-
- return 0;
-}
-
-static void wm8731_shutdown(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_codec *codec = dai->codec;
-
- /* deactivate */
- if (!codec->active) {
- udelay(50);
- snd_soc_write(codec, WM8731_ACTIVE, 0x0);
- }
-}
-
static int wm8731_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
@@ -480,7 +460,6 @@
snd_soc_write(codec, WM8731_PWR, reg | 0x0040);
break;
case SND_SOC_BIAS_OFF:
- snd_soc_write(codec, WM8731_ACTIVE, 0x0);
snd_soc_write(codec, WM8731_PWR, 0xffff);
regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies),
wm8731->supplies);
@@ -496,9 +475,7 @@
SNDRV_PCM_FMTBIT_S24_LE)
static struct snd_soc_dai_ops wm8731_dai_ops = {
- .prepare = wm8731_pcm_prepare,
.hw_params = wm8731_hw_params,
- .shutdown = wm8731_shutdown,
.digital_mute = wm8731_mute,
.set_sysclk = wm8731_set_dai_sysclk,
.set_fmt = wm8731_set_dai_fmt,
diff --git a/sound/soc/codecs/wm8804.c b/sound/soc/codecs/wm8804.c
index 6785688..9a5e67c 100644
--- a/sound/soc/codecs/wm8804.c
+++ b/sound/soc/codecs/wm8804.c
@@ -680,20 +680,25 @@
#define WM8804_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
SNDRV_PCM_FMTBIT_S24_LE)
+#define WM8804_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \
+ SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
+
static struct snd_soc_dai_driver wm8804_dai = {
.name = "wm8804-spdif",
.playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
- .rates = SNDRV_PCM_RATE_8000_192000,
+ .rates = WM8804_RATES,
.formats = WM8804_FORMATS,
},
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
- .rates = SNDRV_PCM_RATE_8000_192000,
+ .rates = WM8804_RATES,
.formats = WM8804_FORMATS,
},
.ops = &wm8804_dai_ops,
diff --git a/sound/soc/codecs/wm8915.c b/sound/soc/codecs/wm8915.c
index a0b1a72..e2ab4fa 100644
--- a/sound/soc/codecs/wm8915.c
+++ b/sound/soc/codecs/wm8915.c
@@ -1839,7 +1839,7 @@
int old;
/* Disable SYSCLK while we reconfigure */
- old = snd_soc_read(codec, WM8915_AIF_CLOCKING_1);
+ old = snd_soc_read(codec, WM8915_AIF_CLOCKING_1) & WM8915_SYSCLK_ENA;
snd_soc_update_bits(codec, WM8915_AIF_CLOCKING_1,
WM8915_SYSCLK_ENA, 0);
@@ -2038,6 +2038,7 @@
break;
case WM8915_FLL_MCLK2:
reg = 1;
+ break;
case WM8915_FLL_DACLRCLK1:
reg = 2;
break;
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index f90ae42..5e05eed 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -1999,12 +1999,12 @@
return 0;
/* If the left PGA is enabled hit that VU bit... */
- if (reg_cache[WM8962_PWR_MGMT_2] & WM8962_HPOUTL_PGA_ENA)
+ if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTL_PGA_ENA)
return snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
reg_cache[WM8962_HPOUTL_VOLUME]);
/* ...otherwise the right. The VU is stereo. */
- if (reg_cache[WM8962_PWR_MGMT_2] & WM8962_HPOUTR_PGA_ENA)
+ if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTR_PGA_ENA)
return snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
reg_cache[WM8962_HPOUTR_VOLUME]);
diff --git a/sound/soc/codecs/wm8991.c b/sound/soc/codecs/wm8991.c
index 3c2ee1b..6af23d0 100644
--- a/sound/soc/codecs/wm8991.c
+++ b/sound/soc/codecs/wm8991.c
@@ -13,7 +13,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 970a95c..83014a7 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -1190,7 +1190,6 @@
SND_SOC_DAPM_INPUT("DMIC2DAT"),
SND_SOC_DAPM_INPUT("Clock"),
-SND_SOC_DAPM_MICBIAS("MICBIAS", WM8994_MICBIAS, 2, 0),
SND_SOC_DAPM_SUPPLY_S("MICBIAS Supply", 1, SND_SOC_NOPM, 0, 0, micbias_ev,
SND_SOC_DAPM_PRE_PMU),
@@ -1509,8 +1508,10 @@
{ "AIF2DACDAT", NULL, "AIF1DACDAT" },
{ "AIF1ADCDAT", NULL, "AIF2ADCDAT" },
{ "AIF2ADCDAT", NULL, "AIF1ADCDAT" },
- { "MICBIAS", NULL, "CLK_SYS" },
- { "MICBIAS", NULL, "MICBIAS Supply" },
+ { "MICBIAS1", NULL, "CLK_SYS" },
+ { "MICBIAS1", NULL, "MICBIAS Supply" },
+ { "MICBIAS2", NULL, "CLK_SYS" },
+ { "MICBIAS2", NULL, "MICBIAS Supply" },
};
static const struct snd_soc_dapm_route wm8994_intercon[] = {
@@ -1713,6 +1714,8 @@
snd_soc_update_bits(codec, WM8994_FLL1_CONTROL_1 + reg_offset,
WM8994_FLL1_ENA | WM8994_FLL1_FRAC,
reg);
+
+ msleep(5);
}
wm8994->fll[id].in = freq_in;
@@ -2761,7 +2764,7 @@
report = SND_JACK_MICROPHONE;
/* Everything else is buttons; just assign slots */
- if (status & 0x1c0)
+ if (status & 0x1c)
report |= SND_JACK_BTN_0;
done:
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index 15dac0f..6680c0b 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -310,7 +310,7 @@
* should allocate a DMA buffer only for the streams that are valid.
*/
- if (dai->driver->playback.channels_min) {
+ if (pcm->streams[0].substream) {
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev,
fsl_dma_hardware.buffer_bytes_max,
&pcm->streams[0].substream->dma_buffer);
@@ -320,13 +320,13 @@
}
}
- if (dai->driver->capture.channels_min) {
+ if (pcm->streams[1].substream) {
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev,
fsl_dma_hardware.buffer_bytes_max,
&pcm->streams[1].substream->dma_buffer);
if (ret) {
- snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
dev_err(card->dev, "can't alloc capture dma buffer\n");
+ snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
return ret;
}
}
@@ -449,7 +449,8 @@
dma_private->ld_buf_phys = ld_buf_phys;
dma_private->dma_buf_phys = substream->dma_buffer.addr;
- ret = request_irq(dma_private->irq, fsl_dma_isr, 0, "DMA", dma_private);
+ ret = request_irq(dma_private->irq, fsl_dma_isr, 0, "fsldma-audio",
+ dma_private);
if (ret) {
dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n",
dma_private->irq, ret);
diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index d8f130d..bb699bb 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -11,9 +11,6 @@
if SND_IMX_SOC
-config SND_MXC_SOC_SSI
- tristate
-
config SND_MXC_SOC_FIQ
tristate
@@ -24,7 +21,6 @@
tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
select SND_SOC_WM8350
- select SND_MXC_SOC_SSI
select SND_MXC_SOC_FIQ
help
Enable support for audio on the i.MX31ADS with the WM1133-EV1
@@ -34,7 +30,6 @@
tristate "SoC audio support for Visstrim M10 boards"
depends on MACH_IMX27_VISSTRIM_M10
select SND_SOC_TVL320AIC32X4
- select SND_MXC_SOC_SSI
select SND_MXC_SOC_MX2
help
Say Y if you want to add support for SoC audio on Visstrim SM10
@@ -44,7 +39,6 @@
tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards"
depends on MACH_PCM043 || MACH_PCA100
select SND_SOC_WM9712
- select SND_MXC_SOC_SSI
select SND_MXC_SOC_FIQ
help
Say Y if you want to add support for SoC audio on Phytec phyCORE
@@ -57,7 +51,6 @@
|| MACH_EUKREA_MBIMXSD35_BASEBOARD \
|| MACH_EUKREA_MBIMXSD51_BASEBOARD
select SND_SOC_TLV320AIC23
- select SND_MXC_SOC_SSI
select SND_MXC_SOC_FIQ
help
Enable I2S based access to the TLV320AIC23B codec attached
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index aab7765..4173b3d 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -337,3 +337,5 @@
platform_driver_unregister(&imx_pcm_driver);
}
module_exit(snd_imx_pcm_exit);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:imx-pcm-audio");
diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c
index 5b13fec..61fceb0 100644
--- a/sound/soc/imx/imx-ssi.c
+++ b/sound/soc/imx/imx-ssi.c
@@ -774,4 +774,4 @@
MODULE_AUTHOR("Sascha Hauer, <s.hauer@pengutronix.de>");
MODULE_DESCRIPTION("i.MX I2S/ac97 SoC Interface");
MODULE_LICENSE("GPL");
-
+MODULE_ALIAS("platform:imx-ssi");
diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c
index 2ce0b2d..fab20a5 100644
--- a/sound/soc/pxa/pxa2xx-pcm.c
+++ b/sound/soc/pxa/pxa2xx-pcm.c
@@ -95,14 +95,14 @@
if (!card->dev->coherent_dma_mask)
card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
- if (dai->driver->playback.channels_min) {
+ if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
ret = pxa2xx_pcm_preallocate_dma_buffer(pcm,
SNDRV_PCM_STREAM_PLAYBACK);
if (ret)
goto out;
}
- if (dai->driver->capture.channels_min) {
+ if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
ret = pxa2xx_pcm_preallocate_dma_buffer(pcm,
SNDRV_PCM_STREAM_CAPTURE);
if (ret)
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index ffa09b3..992a732 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -191,7 +191,7 @@
if (!i2s)
return false;
- active = readl(i2s->addr + I2SMOD);
+ active = readl(i2s->addr + I2SCON);
if (is_secondary(i2s))
active &= CON_TXSDMA_ACTIVE;
@@ -223,7 +223,7 @@
if (!i2s)
return false;
- active = readl(i2s->addr + I2SMOD) & CON_RXDMA_ACTIVE;
+ active = readl(i2s->addr + I2SCON) & CON_RXDMA_ACTIVE;
return active ? true : false;
}
diff --git a/sound/soc/sh/fsi-ak4642.c b/sound/soc/sh/fsi-ak4642.c
index d6f4703..770a71a 100644
--- a/sound/soc/sh/fsi-ak4642.c
+++ b/sound/soc/sh/fsi-ak4642.c
@@ -97,7 +97,7 @@
static struct fsi_ak4642_data fsi_a_ak4642 = {
.name = "AK4642",
- .card = "FSIA (AK4642)",
+ .card = "FSIA-AK4642",
.cpu_dai = "fsia-dai",
.codec = "ak4642-codec.0-0012",
.platform = "sh_fsi.0",
@@ -106,7 +106,7 @@
static struct fsi_ak4642_data fsi_b_ak4642 = {
.name = "AK4642",
- .card = "FSIB (AK4642)",
+ .card = "FSIB-AK4642",
.cpu_dai = "fsib-dai",
.codec = "ak4642-codec.0-0012",
.platform = "sh_fsi.0",
@@ -115,7 +115,7 @@
static struct fsi_ak4642_data fsi_a_ak4643 = {
.name = "AK4643",
- .card = "FSIA (AK4643)",
+ .card = "FSIA-AK4643",
.cpu_dai = "fsia-dai",
.codec = "ak4642-codec.0-0013",
.platform = "sh_fsi.0",
@@ -124,7 +124,7 @@
static struct fsi_ak4642_data fsi_b_ak4643 = {
.name = "AK4643",
- .card = "FSIB (AK4643)",
+ .card = "FSIB-AK4643",
.cpu_dai = "fsib-dai",
.codec = "ak4642-codec.0-0013",
.platform = "sh_fsi.0",
@@ -133,7 +133,7 @@
static struct fsi_ak4642_data fsi2_a_ak4642 = {
.name = "AK4642",
- .card = "FSI2A (AK4642)",
+ .card = "FSI2A-AK4642",
.cpu_dai = "fsia-dai",
.codec = "ak4642-codec.0-0012",
.platform = "sh_fsi2",
@@ -142,7 +142,7 @@
static struct fsi_ak4642_data fsi2_b_ak4642 = {
.name = "AK4642",
- .card = "FSI2B (AK4642)",
+ .card = "FSI2B-AK4642",
.cpu_dai = "fsib-dai",
.codec = "ak4642-codec.0-0012",
.platform = "sh_fsi2",
@@ -151,7 +151,7 @@
static struct fsi_ak4642_data fsi2_a_ak4643 = {
.name = "AK4643",
- .card = "FSI2A (AK4643)",
+ .card = "FSI2A-AK4643",
.cpu_dai = "fsia-dai",
.codec = "ak4642-codec.0-0013",
.platform = "sh_fsi2",
@@ -160,7 +160,7 @@
static struct fsi_ak4642_data fsi2_b_ak4643 = {
.name = "AK4643",
- .card = "FSI2B (AK4643)",
+ .card = "FSI2B-AK4643",
.cpu_dai = "fsib-dai",
.codec = "ak4642-codec.0-0013",
.platform = "sh_fsi2",
diff --git a/sound/soc/sh/fsi-da7210.c b/sound/soc/sh/fsi-da7210.c
index dbafd7a..59553fd 100644
--- a/sound/soc/sh/fsi-da7210.c
+++ b/sound/soc/sh/fsi-da7210.c
@@ -42,7 +42,7 @@
};
static struct snd_soc_card fsi_soc_card = {
- .name = "FSI (DA7210)",
+ .name = "FSI-DA7210",
.dai_link = &fsi_da7210_dai,
.num_links = 1,
};
diff --git a/sound/soc/sh/fsi-hdmi.c b/sound/soc/sh/fsi-hdmi.c
index 9719985..d3d9fd8 100644
--- a/sound/soc/sh/fsi-hdmi.c
+++ b/sound/soc/sh/fsi-hdmi.c
@@ -83,13 +83,13 @@
static struct fsi_hdmi_data fsi2_a_hdmi = {
.cpu_dai = "fsia-dai",
- .card = "FSI2A (SH MOBILE HDMI)",
+ .card = "FSI2A-HDMI",
.id = FSI_PORT_A,
};
static struct fsi_hdmi_data fsi2_b_hdmi = {
.cpu_dai = "fsib-dai",
- .card = "FSI2B (SH MOBILE HDMI)",
+ .card = "FSI2B-HDMI",
.id = FSI_PORT_B,
};
diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c
index 06b7b81..039b953 100644
--- a/sound/soc/soc-cache.c
+++ b/sound/soc/soc-cache.c
@@ -409,9 +409,6 @@
codec->bulk_write_raw = snd_soc_hw_bulk_write_raw;
switch (control) {
- case SND_SOC_CUSTOM:
- break;
-
case SND_SOC_I2C:
#if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
codec->hw_write = (hw_write_t)i2c_master_send;
@@ -466,6 +463,9 @@
static unsigned int snd_soc_get_cache_val(const void *base, unsigned int idx,
unsigned int word_size)
{
+ if (!base)
+ return -1;
+
switch (word_size) {
case 1: {
const u8 *cache = base;
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index d75043e..b194be0 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1929,8 +1929,9 @@
"%s", card->name);
snprintf(card->snd_card->longname, sizeof(card->snd_card->longname),
"%s", card->long_name ? card->long_name : card->name);
- snprintf(card->snd_card->driver, sizeof(card->snd_card->driver),
- "%s", card->driver_name ? card->driver_name : card->name);
+ if (card->driver_name)
+ strlcpy(card->snd_card->driver, card->driver_name,
+ sizeof(card->snd_card->driver));
if (card->late_probe) {
ret = card->late_probe(card);
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 776e6f4..32ab7fc 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -350,9 +350,9 @@
}
/* create new dapm mixer control */
-static int dapm_new_mixer(struct snd_soc_dapm_context *dapm,
- struct snd_soc_dapm_widget *w)
+static int dapm_new_mixer(struct snd_soc_dapm_widget *w)
{
+ struct snd_soc_dapm_context *dapm = w->dapm;
int i, ret = 0;
size_t name_len, prefix_len;
struct snd_soc_dapm_path *path;
@@ -450,9 +450,9 @@
}
/* create new dapm mux control */
-static int dapm_new_mux(struct snd_soc_dapm_context *dapm,
- struct snd_soc_dapm_widget *w)
+static int dapm_new_mux(struct snd_soc_dapm_widget *w)
{
+ struct snd_soc_dapm_context *dapm = w->dapm;
struct snd_soc_dapm_path *path = NULL;
struct snd_kcontrol *kcontrol;
struct snd_card *card = dapm->card->snd_card;
@@ -535,8 +535,7 @@
}
/* create new dapm volume control */
-static int dapm_new_pga(struct snd_soc_dapm_context *dapm,
- struct snd_soc_dapm_widget *w)
+static int dapm_new_pga(struct snd_soc_dapm_widget *w)
{
if (w->num_kcontrols)
dev_err(w->dapm->dev,
@@ -1826,13 +1825,13 @@
case snd_soc_dapm_mixer:
case snd_soc_dapm_mixer_named_ctl:
w->power_check = dapm_generic_check_power;
- dapm_new_mixer(dapm, w);
+ dapm_new_mixer(w);
break;
case snd_soc_dapm_mux:
case snd_soc_dapm_virt_mux:
case snd_soc_dapm_value_mux:
w->power_check = dapm_generic_check_power;
- dapm_new_mux(dapm, w);
+ dapm_new_mux(w);
break;
case snd_soc_dapm_adc:
case snd_soc_dapm_aif_out:
@@ -1845,7 +1844,7 @@
case snd_soc_dapm_pga:
case snd_soc_dapm_out_drv:
w->power_check = dapm_generic_check_power;
- dapm_new_pga(dapm, w);
+ dapm_new_pga(w);
break;
case snd_soc_dapm_input:
case snd_soc_dapm_output:
diff --git a/sound/soc/tegra/tegra_i2s.c b/sound/soc/tegra/tegra_i2s.c
index 6b817e2..95f03c1 100644
--- a/sound/soc/tegra/tegra_i2s.c
+++ b/sound/soc/tegra/tegra_i2s.c
@@ -222,12 +222,18 @@
if (i2sclock % (2 * srate))
reg |= TEGRA_I2S_TIMING_NON_SYM_ENABLE;
+ if (!i2s->clk_refs)
+ clk_enable(i2s->clk_i2s);
+
tegra_i2s_write(i2s, TEGRA_I2S_TIMING, reg);
tegra_i2s_write(i2s, TEGRA_I2S_FIFO_SCR,
TEGRA_I2S_FIFO_SCR_FIFO2_ATN_LVL_FOUR_SLOTS |
TEGRA_I2S_FIFO_SCR_FIFO1_ATN_LVL_FOUR_SLOTS);
+ if (!i2s->clk_refs)
+ clk_disable(i2s->clk_i2s);
+
return 0;
}
diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
index 337a002..4dd051b 100644
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
@@ -1124,6 +1124,6 @@
}
module_exit(at73c213_exit);
-MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
MODULE_DESCRIPTION("Sound driver for AT73C213 with Atmel SSC");
MODULE_LICENSE("GPL");
diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c
index a91719d..1e3ae33 100644
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -270,7 +270,6 @@
data = 0x00; /* resume ezusb cpu */
ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1);
if (ret < 0) {
- release_firmware(fw);
snd_printk(KERN_ERR PREFIX "unable to upload ezusb "
"firmware %s: end message.\n", fwname);
return ret;
diff --git a/sound/usb/6fire/pcm.c b/sound/usb/6fire/pcm.c
index b137b25..d144cdb 100644
--- a/sound/usb/6fire/pcm.c
+++ b/sound/usb/6fire/pcm.c
@@ -395,12 +395,12 @@
alsa_rt->hw = pcm_hw;
if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- if (rt->rate >= 0)
+ if (rt->rate < ARRAY_SIZE(rates))
alsa_rt->hw.rates = rates_alsaid[rt->rate];
alsa_rt->hw.channels_max = OUT_N_CHANNELS;
sub = &rt->playback;
} else if (alsa_sub->stream == SNDRV_PCM_STREAM_CAPTURE) {
- if (rt->rate >= 0)
+ if (rt->rate < ARRAY_SIZE(rates))
alsa_rt->hw.rates = rates_alsaid[rt->rate];
alsa_rt->hw.channels_max = IN_N_CHANNELS;
sub = &rt->capture;
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 032ba63..940257b 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -633,7 +633,7 @@
SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
-LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive $(EXTLIBS)
+LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive -Wl,--start-group $(EXTLIBS) -Wl,--end-group
ALL_CFLAGS += $(BASIC_CFLAGS)
ALL_CFLAGS += $(ARCH_CFLAGS)
diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c
index b671862..2da9162 100644
--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -474,7 +474,7 @@
unsigned int nr_events[nsyscalls],
expected_nr_events[nsyscalls], i, j;
struct perf_evsel *evsels[nsyscalls], *evsel;
- int sample_size = perf_sample_size(attr.sample_type);
+ int sample_size = __perf_evsel__sample_size(attr.sample_type);
for (i = 0; i < nsyscalls; ++i) {
char name[64];
diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN
index 26d4d3f..ad73300 100755
--- a/tools/perf/util/PERF-VERSION-GEN
+++ b/tools/perf/util/PERF-VERSION-GEN
@@ -23,12 +23,7 @@
then
VN=$(echo "$VN" | sed -e 's/-/./g');
else
- eval $(grep '^VERSION[[:space:]]*=' ../../Makefile|tr -d ' ')
- eval $(grep '^PATCHLEVEL[[:space:]]*=' ../../Makefile|tr -d ' ')
- eval $(grep '^SUBLEVEL[[:space:]]*=' ../../Makefile|tr -d ' ')
- eval $(grep '^EXTRAVERSION[[:space:]]*=' ../../Makefile|tr -d ' ')
-
- VN="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}"
+ VN=$(MAKEFLAGS= make -sC ../.. kernelversion)
fi
VN=$(expr "$VN" : v*'\(.*\)')
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 0fe9adf..3c1b8a6 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -35,22 +35,6 @@
return perf_event__names[id];
}
-int perf_sample_size(u64 sample_type)
-{
- u64 mask = sample_type & PERF_SAMPLE_MASK;
- int size = 0;
- int i;
-
- for (i = 0; i < 64; i++) {
- if (mask & (1ULL << i))
- size++;
- }
-
- size *= sizeof(u64);
-
- return size;
-}
-
static struct perf_sample synth_sample = {
.pid = -1,
.tid = -1,
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index c083328..1d7f664 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -82,8 +82,6 @@
struct ip_callchain *callchain;
};
-int perf_sample_size(u64 sample_type);
-
#define BUILD_ID_SIZE 20
struct build_id_event {
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index 50aa348..b021ea9 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -12,7 +12,6 @@
#include "evlist.h"
#include "evsel.h"
#include "util.h"
-#include "debug.h"
#include <sys/mman.h>
@@ -257,19 +256,15 @@
return evlist->mmap != NULL ? 0 : -ENOMEM;
}
-static int __perf_evlist__mmap(struct perf_evlist *evlist, struct perf_evsel *evsel,
+static int __perf_evlist__mmap(struct perf_evlist *evlist,
int idx, int prot, int mask, int fd)
{
evlist->mmap[idx].prev = 0;
evlist->mmap[idx].mask = mask;
evlist->mmap[idx].base = mmap(NULL, evlist->mmap_len, prot,
MAP_SHARED, fd, 0);
- if (evlist->mmap[idx].base == MAP_FAILED) {
- if (evlist->cpus->map[idx] == -1 && evsel->attr.inherit)
- ui__warning("Inherit is not allowed on per-task "
- "events using mmap.\n");
+ if (evlist->mmap[idx].base == MAP_FAILED)
return -1;
- }
perf_evlist__add_pollfd(evlist, fd);
return 0;
@@ -289,7 +284,7 @@
if (output == -1) {
output = fd;
- if (__perf_evlist__mmap(evlist, evsel, cpu,
+ if (__perf_evlist__mmap(evlist, cpu,
prot, mask, output) < 0)
goto out_unmap;
} else {
@@ -329,7 +324,7 @@
if (output == -1) {
output = fd;
- if (__perf_evlist__mmap(evlist, evsel, thread,
+ if (__perf_evlist__mmap(evlist, thread,
prot, mask, output) < 0)
goto out_unmap;
} else {
@@ -460,33 +455,46 @@
return 0;
}
-u64 perf_evlist__sample_type(struct perf_evlist *evlist)
+bool perf_evlist__valid_sample_type(const struct perf_evlist *evlist)
{
- struct perf_evsel *pos;
- u64 type = 0;
+ struct perf_evsel *pos, *first;
- list_for_each_entry(pos, &evlist->entries, node) {
- if (!type)
- type = pos->attr.sample_type;
- else if (type != pos->attr.sample_type)
- die("non matching sample_type");
+ pos = first = list_entry(evlist->entries.next, struct perf_evsel, node);
+
+ list_for_each_entry_continue(pos, &evlist->entries, node) {
+ if (first->attr.sample_type != pos->attr.sample_type)
+ return false;
}
- return type;
+ return true;
+}
+
+u64 perf_evlist__sample_type(const struct perf_evlist *evlist)
+{
+ struct perf_evsel *first;
+
+ first = list_entry(evlist->entries.next, struct perf_evsel, node);
+ return first->attr.sample_type;
+}
+
+bool perf_evlist__valid_sample_id_all(const struct perf_evlist *evlist)
+{
+ struct perf_evsel *pos, *first;
+
+ pos = first = list_entry(evlist->entries.next, struct perf_evsel, node);
+
+ list_for_each_entry_continue(pos, &evlist->entries, node) {
+ if (first->attr.sample_id_all != pos->attr.sample_id_all)
+ return false;
+ }
+
+ return true;
}
bool perf_evlist__sample_id_all(const struct perf_evlist *evlist)
{
- bool value = false, first = true;
- struct perf_evsel *pos;
+ struct perf_evsel *first;
- list_for_each_entry(pos, &evlist->entries, node) {
- if (first) {
- value = pos->attr.sample_id_all;
- first = false;
- } else if (value != pos->attr.sample_id_all)
- die("non matching sample_id_all");
- }
-
- return value;
+ first = list_entry(evlist->entries.next, struct perf_evsel, node);
+ return first->attr.sample_id_all;
}
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index 0a1ef1f..b2b8623 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -66,7 +66,9 @@
void perf_evlist__delete_maps(struct perf_evlist *evlist);
int perf_evlist__set_filters(struct perf_evlist *evlist);
-u64 perf_evlist__sample_type(struct perf_evlist *evlist);
-bool perf_evlist__sample_id_all(const struct perf_evlist *evlist);
+u64 perf_evlist__sample_type(const struct perf_evlist *evlist);
+bool perf_evlist__sample_id_all(const const struct perf_evlist *evlist);
+bool perf_evlist__valid_sample_type(const struct perf_evlist *evlist);
+bool perf_evlist__valid_sample_id_all(const struct perf_evlist *evlist);
#endif /* __PERF_EVLIST_H */
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index cca29ed..0239eb8 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -15,6 +15,22 @@
#define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y))
+int __perf_evsel__sample_size(u64 sample_type)
+{
+ u64 mask = sample_type & PERF_SAMPLE_MASK;
+ int size = 0;
+ int i;
+
+ for (i = 0; i < 64; i++) {
+ if (mask & (1ULL << i))
+ size++;
+ }
+
+ size *= sizeof(u64);
+
+ return size;
+}
+
void perf_evsel__init(struct perf_evsel *evsel,
struct perf_event_attr *attr, int idx)
{
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index f79bb2c..7e9366e 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -149,4 +149,11 @@
return __perf_evsel__read(evsel, ncpus, nthreads, true);
}
+int __perf_evsel__sample_size(u64 sample_type);
+
+static inline int perf_evsel__sample_size(struct perf_evsel *evsel)
+{
+ return __perf_evsel__sample_size(evsel->attr.sample_type);
+}
+
#endif /* __PERF_EVSEL_H */
diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c
index 69436b3..a9ac050 100644
--- a/tools/perf/util/python.c
+++ b/tools/perf/util/python.c
@@ -674,7 +674,7 @@
struct perf_evlist *evlist = &pevlist->evlist;
union perf_event *event;
int sample_id_all = 1, cpu;
- static char *kwlist[] = {"sample_id_all", NULL, NULL};
+ static char *kwlist[] = {"cpu", "sample_id_all", NULL, NULL};
int err;
if (!PyArg_ParseTupleAndKeywords(args, kwargs, "i|i", kwlist,
@@ -692,16 +692,14 @@
first = list_entry(evlist->entries.next, struct perf_evsel, node);
err = perf_event__parse_sample(event, first->attr.sample_type,
- perf_sample_size(first->attr.sample_type),
+ perf_evsel__sample_size(first),
sample_id_all, &pevent->sample);
- if (err) {
- pr_err("Can't parse sample, err = %d\n", err);
- goto end;
- }
-
+ if (err)
+ return PyErr_Format(PyExc_OSError,
+ "perf: can't parse sample, err=%d", err);
return pyevent;
}
-end:
+
Py_INCREF(Py_None);
return Py_None;
}
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 64500fc..f5a8fbd 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -58,6 +58,16 @@
goto out_close;
}
+ if (!perf_evlist__valid_sample_type(self->evlist)) {
+ pr_err("non matching sample_type");
+ goto out_close;
+ }
+
+ if (!perf_evlist__valid_sample_id_all(self->evlist)) {
+ pr_err("non matching sample_id_all");
+ goto out_close;
+ }
+
self->size = input_stat.st_size;
return 0;
@@ -97,7 +107,7 @@
void perf_session__update_sample_type(struct perf_session *self)
{
self->sample_type = perf_evlist__sample_type(self->evlist);
- self->sample_size = perf_sample_size(self->sample_type);
+ self->sample_size = __perf_evsel__sample_size(self->sample_type);
self->sample_id_all = perf_evlist__sample_id_all(self->evlist);
perf_session__id_header_size(self);
}
diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c
index 1e88485..0a7ed5b 100644
--- a/tools/perf/util/trace-event-parse.c
+++ b/tools/perf/util/trace-event-parse.c
@@ -2187,6 +2187,7 @@
{ "TASKLET_SOFTIRQ", 6 },
{ "SCHED_SOFTIRQ", 7 },
{ "HRTIMER_SOFTIRQ", 8 },
+ { "RCU_SOFTIRQ", 9 },
{ "HRTIMER_NORESTART", 0 },
{ "HRTIMER_RESTART", 1 },
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 22cdb96..96ebc06 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -467,12 +467,8 @@
if (!kvm->buses[i])
goto out_err;
}
+
spin_lock_init(&kvm->mmu_lock);
-
- r = kvm_init_mmu_notifier(kvm);
- if (r)
- goto out_err;
-
kvm->mm = current->mm;
atomic_inc(&kvm->mm->mm_count);
kvm_eventfd_init(kvm);
@@ -480,6 +476,11 @@
mutex_init(&kvm->irq_lock);
mutex_init(&kvm->slots_lock);
atomic_set(&kvm->users_count, 1);
+
+ r = kvm_init_mmu_notifier(kvm);
+ if (r)
+ goto out_err;
+
raw_spin_lock(&kvm_lock);
list_add(&kvm->vm_list, &vm_list);
raw_spin_unlock(&kvm_lock);
@@ -651,7 +652,9 @@
/* We can read the guest memory with __xxx_user() later on. */
if (user_alloc &&
((mem->userspace_addr & (PAGE_SIZE - 1)) ||
- !access_ok(VERIFY_WRITE, mem->userspace_addr, mem->memory_size)))
+ !access_ok(VERIFY_WRITE,
+ (void __user *)(unsigned long)mem->userspace_addr,
+ mem->memory_size)))
goto out;
if (mem->slot >= KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS)
goto out;