target: move transport_generic_prepare_cdb into pscsi
The virtual drivers don't need to clear cdb fields they never look at, so move
this code into the pscsi backend.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index 099c59d..9a776cc 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -1022,6 +1022,30 @@
return -ENOMEM;
}
+/*
+ * Clear a lun set in the cdb if the initiator talking to use spoke
+ * and old standards version, as we can't assume the underlying device
+ * won't choke up on it.
+ */
+static inline void pscsi_clear_cdb_lun(unsigned char *cdb)
+{
+ switch (cdb[0]) {
+ case READ_10: /* SBC - RDProtect */
+ case READ_12: /* SBC - RDProtect */
+ case READ_16: /* SBC - RDProtect */
+ case SEND_DIAGNOSTIC: /* SPC - SELF-TEST Code */
+ case VERIFY: /* SBC - VRProtect */
+ case VERIFY_16: /* SBC - VRProtect */
+ case WRITE_VERIFY: /* SBC - VRProtect */
+ case WRITE_VERIFY_12: /* SBC - VRProtect */
+ case MAINTENANCE_IN: /* SPC - Parameter Data Format for SA RTPG */
+ break;
+ default:
+ cdb[1] &= 0x1f; /* clear logical unit number */
+ break;
+ }
+}
+
static int pscsi_parse_cdb(struct se_cmd *cmd)
{
unsigned char *cdb = cmd->t_task_cdb;
@@ -1034,6 +1058,8 @@
return -EINVAL;
}
+ pscsi_clear_cdb_lun(cdb);
+
/*
* For REPORT LUNS we always need to emulate the respone, and for everything
* related to persistent reservations and ALUA we might optionally use our
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 3a7fe21..7cfb519 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1315,34 +1315,6 @@
}
EXPORT_SYMBOL(transport_add_device_to_core_hba);
-/* transport_generic_prepare_cdb():
- *
- * Since the Initiator sees iSCSI devices as LUNs, the SCSI CDB will
- * contain the iSCSI LUN in bits 7-5 of byte 1 as per SAM-2.
- * The point of this is since we are mapping iSCSI LUNs to
- * SCSI Target IDs having a non-zero LUN in the CDB will throw the
- * devices and HBAs for a loop.
- */
-static inline void transport_generic_prepare_cdb(
- unsigned char *cdb)
-{
- switch (cdb[0]) {
- case READ_10: /* SBC - RDProtect */
- case READ_12: /* SBC - RDProtect */
- case READ_16: /* SBC - RDProtect */
- case SEND_DIAGNOSTIC: /* SPC - SELF-TEST Code */
- case VERIFY: /* SBC - VRProtect */
- case VERIFY_16: /* SBC - VRProtect */
- case WRITE_VERIFY: /* SBC - VRProtect */
- case WRITE_VERIFY_12: /* SBC - VRProtect */
- case MAINTENANCE_IN: /* SPC - Parameter Data Format for SA RTPG */
- break;
- default:
- cdb[1] &= 0x1f; /* clear logical unit number */
- break;
- }
-}
-
int target_cmd_size_check(struct se_cmd *cmd, unsigned int size)
{
struct se_device *dev = cmd->se_dev;
@@ -1471,7 +1443,6 @@
unsigned long flags;
int ret;
- transport_generic_prepare_cdb(cdb);
/*
* Ensure that the received CDB is less than the max (252 + 8) bytes
* for VARIABLE_LENGTH_CMD