diff --git a/Documentation/ABI/testing/sysfs-bus-fcoe b/Documentation/ABI/testing/sysfs-bus-fcoe
index 469d09c..50e2a80 100644
--- a/Documentation/ABI/testing/sysfs-bus-fcoe
+++ b/Documentation/ABI/testing/sysfs-bus-fcoe
@@ -9,19 +9,19 @@
 			  this value will change the dev_loss_tmo for all
 			  FCFs discovered by this controller.
 
-	lesb_link_fail:   Link Error Status Block (LESB) link failure count.
+	lesb/link_fail:   Link Error Status Block (LESB) link failure count.
 
-	lesb_vlink_fail:  Link Error Status Block (LESB) virtual link
+	lesb/vlink_fail:  Link Error Status Block (LESB) virtual link
 			  failure count.
 
-	lesb_miss_fka:    Link Error Status Block (LESB) missed FCoE
+	lesb/miss_fka:    Link Error Status Block (LESB) missed FCoE
 			  Initialization Protocol (FIP) Keep-Alives (FKA).
 
-	lesb_symb_err:    Link Error Status Block (LESB) symbolic error count.
+	lesb/symb_err:    Link Error Status Block (LESB) symbolic error count.
 
-	lesb_err_block:   Link Error Status Block (LESB) block error count.
+	lesb/err_block:   Link Error Status Block (LESB) block error count.
 
-	lesb_fcs_error:   Link Error Status Block (LESB) Fibre Channel
+	lesb/fcs_error:   Link Error Status Block (LESB) Fibre Channel
 			  Serivces error count.
 
 Notes: ctlr_X (global increment starting at 0)
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
index 1c18449..728c38c 100644
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@@ -132,3 +132,12 @@
 which are 'A'live, and the array is 2/490221568 complete with recovery.
 Faulty or missing devices are marked 'D'.  Devices that are out-of-sync
 are marked 'a'.
+
+
+Version History
+---------------
+1.0.0	Initial version.  Support for RAID 4/5/6
+1.1.0	Added support for RAID 1
+1.2.0	Handle creation of arrays that contain failed devices.
+1.3.0	Added support for RAID 10
+1.3.1	Allow device replacement/rebuild for RAID 10
diff --git a/Documentation/filesystems/nfs/nfsd-admin-interfaces.txt b/Documentation/filesystems/nfs/nfsd-admin-interfaces.txt
new file mode 100644
index 0000000..56a96fb
--- /dev/null
+++ b/Documentation/filesystems/nfs/nfsd-admin-interfaces.txt
@@ -0,0 +1,41 @@
+Administrative interfaces for nfsd
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Note that normally these interfaces are used only by the utilities in
+nfs-utils.
+
+nfsd is controlled mainly by pseudofiles under the "nfsd" filesystem,
+which is normally mounted at /proc/fs/nfsd/.
+
+The server is always started by the first write of a nonzero value to
+nfsd/threads.
+
+Before doing that, NFSD can be told which sockets to listen on by
+writing to nfsd/portlist; that write may be:
+
+	- an ascii-encoded file descriptor, which should refer to a
+	  bound (and listening, for tcp) socket, or
+	- "transportname port", where transportname is currently either
+	  "udp", "tcp", or "rdma".
+
+If nfsd is started without doing any of these, then it will create one
+udp and one tcp listener at port 2049 (see nfsd_init_socks).
+
+On startup, nfsd and lockd grace periods start.
+
+nfsd is shut down by a write of 0 to nfsd/threads.  All locks and state
+are thrown away at that point.
+
+Between startup and shutdown, the number of threads may be adjusted up
+or down by additional writes to nfsd/threads or by writes to
+nfsd/pool_threads.
+
+For more detail about files under nfsd/ and what they control, see
+fs/nfsd/nfsctl.c; most of them have detailed comments.
+
+Implementation notes
+^^^^^^^^^^^^^^^^^^^^
+
+Note that the rpc server requires the caller to serialize addition and
+removal of listening sockets, and startup and shutdown of the server.
+For nfsd this is done using nfsd_mutex.
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 3a30794..da03146 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,16 @@
+Release Date    : Mon. Oct 1, 2012 17:00:00 PST 2012 -
+			(emaild-id:megaraidlinux@lsi.com)
+			Adam Radford
+Current Version : 06.504.01.00-rc1
+Old Version     : 00.00.06.18-rc1
+    1. Removed un-needed completion_lock spinlock calls.
+    2. Add module param for configurable MSI-X vector count.
+    3. Load io_request DataLength in bytes.
+    4. Add array boundary check for SystemPD.
+    5. Add SystemPD FastPath support.
+    6. Remove duplicate code.
+    7. Version, Changelog, Copyright update.
+-------------------------------------------------------------------------------
 Release Date    : Tue. Jun 17, 2012 17:00:00 PST 2012 -
 			(emaild-id:megaraidlinux@lsi.com)
 			Adam Radford/Kashyap Desai
diff --git a/Documentation/thermal/cpu-cooling-api.txt b/Documentation/thermal/cpu-cooling-api.txt
new file mode 100644
index 0000000..fca24c9
--- /dev/null
+++ b/Documentation/thermal/cpu-cooling-api.txt
@@ -0,0 +1,32 @@
+CPU cooling APIs How To
+===================================
+
+Written by Amit Daniel Kachhap <amit.kachhap@linaro.org>
+
+Updated: 12 May 2012
+
+Copyright (c)  2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
+
+0. Introduction
+
+The generic cpu cooling(freq clipping) provides registration/unregistration APIs
+to the caller. The binding of the cooling devices to the trip point is left for
+the user. The registration APIs returns the cooling device pointer.
+
+1. cpu cooling APIs
+
+1.1 cpufreq registration/unregistration APIs
+1.1.1 struct thermal_cooling_device *cpufreq_cooling_register(
+	struct cpumask *clip_cpus)
+
+    This interface function registers the cpufreq cooling device with the name
+    "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
+    cooling devices.
+
+   clip_cpus: cpumask of cpus where the frequency constraints will happen.
+
+1.1.2 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
+
+    This interface function unregisters the "thermal-cpufreq-%x" cooling device.
+
+    cdev: Cooling device pointer which has to be unregistered.
diff --git a/Documentation/hwmon/exynos4_tmu b/Documentation/thermal/exynos_thermal
similarity index 70%
rename from Documentation/hwmon/exynos4_tmu
rename to Documentation/thermal/exynos_thermal
index c3c6b41..2b46f67 100644
--- a/Documentation/hwmon/exynos4_tmu
+++ b/Documentation/thermal/exynos_thermal
@@ -46,36 +46,7 @@
   The threshold and each trigger_level are set
   through the corresponding registers.
 
-When an interrupt occurs, this driver notify user space of
-one of four threshold levels for the interrupt
-through kobject_uevent_env and sysfs_notify functions.
+When an interrupt occurs, this driver notify kernel thermal framework
+with the function exynos4_report_trigger.
 Although an interrupt condition for level_0 can be set,
-it is not notified to user space through sysfs_notify function.
-
-Sysfs Interface
----------------
-name		name of the temperature sensor
-		RO
-
-temp1_input	temperature
-		RO
-
-temp1_max	temperature for level_1 interrupt
-		RO
-
-temp1_crit	temperature for level_2 interrupt
-		RO
-
-temp1_emergency	temperature for level_3 interrupt
-		RO
-
-temp1_max_alarm	alarm for level_1 interrupt
-		RO
-
-temp1_crit_alarm
-		alarm for level_2 interrupt
-		RO
-
-temp1_emergency_alarm
-		alarm for level_3 interrupt
-		RO
+it can be used to synchronize the cooling action.
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index c087dbc..ca1a1a3 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -84,7 +84,8 @@
 
 1.3 interface for binding a thermal zone device with a thermal cooling device
 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
-		int trip, struct thermal_cooling_device *cdev);
+	int trip, struct thermal_cooling_device *cdev,
+	unsigned long upper, unsigned long lower);
 
     This interface function bind a thermal cooling device to the certain trip
     point of a thermal zone device.
@@ -93,6 +94,12 @@
     cdev: thermal cooling device
     trip: indicates which trip point the cooling devices is associated with
 	  in this thermal zone.
+    upper:the Maximum cooling state for this trip point.
+          THERMAL_NO_LIMIT means no upper limit,
+	  and the cooling device can be in max_state.
+    lower:the Minimum cooling state can be used for this trip point.
+          THERMAL_NO_LIMIT means no lower limit,
+	  and the cooling device can be in cooling state 0.
 
 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
 		int trip, struct thermal_cooling_device *cdev);
diff --git a/arch/Kconfig b/arch/Kconfig
index 26a2841..a79a1ad 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -274,6 +274,9 @@
 config GENERIC_KERNEL_THREAD
 	bool
 
+config GENERIC_KERNEL_EXECVE
+	bool
+
 config HAVE_ARCH_SECCOMP_FILTER
 	bool
 	help
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 7da9124..7a08cfb 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -21,6 +21,7 @@
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select GENERIC_KERNEL_THREAD
+	select GENERIC_KERNEL_EXECVE
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 3cb6c11..7826e22 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -482,7 +482,6 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
 #define __ARCH_WANT_SYS_EXECVE
-#define __ARCH_WANT_KERNEL_EXECVE
 
 /* "Conditional" syscalls.  What we want is
 
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index 2a359c9..a760783 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -311,7 +311,7 @@
 
 	.align	4
 ret_from_sys_call:
-	cmovne	$26, 0, $19		/* $19 = 0 => non-restartable */
+	cmovne	$26, 0, $18		/* $18 = 0 => non-restartable */
 	ldq	$0, SP_OFF($sp)
 	and	$0, 8, $0
 	beq	$0, ret_to_kernel
@@ -320,8 +320,8 @@
 		sampling and the rti.  */
 	lda	$16, 7
 	call_pal PAL_swpipl
-	ldl	$5, TI_FLAGS($8)
-	and	$5, _TIF_WORK_MASK, $2
+	ldl	$17, TI_FLAGS($8)
+	and	$17, _TIF_WORK_MASK, $2
 	bne	$2, work_pending
 restore_all:
 	RESTORE_ALL
@@ -341,10 +341,10 @@
 	 * frame to indicate that a negative return value wasn't an
 	 * error number..
 	 */
-	ldq	$19, 0($sp)	/* old syscall nr (zero if success) */
-	beq	$19, $ret_success
+	ldq	$18, 0($sp)	/* old syscall nr (zero if success) */
+	beq	$18, $ret_success
 
-	ldq	$20, 72($sp)	/* .. and this a3 */
+	ldq	$19, 72($sp)	/* .. and this a3 */
 	subq	$31, $0, $0	/* with error in v0 */
 	addq	$31, 1, $1	/* set a3 for errno return */
 	stq	$0, 0($sp)
@@ -362,51 +362,35 @@
  * Do all cleanup when returning from all interrupts and system calls.
  *
  * Arguments:
- *       $5: TI_FLAGS.
  *       $8: current.
- *      $19: The old syscall number, or zero if this is not a return
+ *      $17: TI_FLAGS.
+ *      $18: The old syscall number, or zero if this is not a return
  *           from a syscall that errored and is possibly restartable.
- *      $20: The old a3 value
+ *      $19: The old a3 value
  */
 
 	.align	4
 	.ent	work_pending
 work_pending:
-	and	$5, _TIF_NEED_RESCHED, $2
-	beq	$2, $work_notifysig
+	and	$17, _TIF_NOTIFY_RESUME | _TIF_SIGPENDING, $2
+	bne	$2, $work_notifysig
 
 $work_resched:
-	subq	$sp, 16, $sp
-	stq	$19, 0($sp)              /* save syscall nr */
-	stq	$20, 8($sp)              /* and error indication (a3) */
+	/*
+	 * We can get here only if we returned from syscall without SIGPENDING
+	 * or got through work_notifysig already.  Either case means no syscall
+	 * restarts for us, so let $18 and $19 burn.
+	 */
 	jsr	$26, schedule
-	ldq	$19, 0($sp)
-	ldq	$20, 8($sp)
-	addq	$sp, 16, $sp
-	/* Make sure need_resched and sigpending don't change between
-		sampling and the rti.  */
-	lda	$16, 7
-	call_pal PAL_swpipl
-	ldl	$5, TI_FLAGS($8)
-	and	$5, _TIF_WORK_MASK, $2
-	beq	$2, restore_all
-	and	$5, _TIF_NEED_RESCHED, $2
-	bne	$2, $work_resched
+	mov	0, $18
+	br	ret_to_user
 
 $work_notifysig:
 	mov	$sp, $16
 	bsr	$1, do_switch_stack
-	mov	$sp, $17
-	mov	$5, $18
-	mov	$19, $9		/* save old syscall number */
-	mov	$20, $10	/* save old a3 */
-	and	$5, _TIF_SIGPENDING, $2
-	cmovne	$2, 0, $9	/* we don't want double syscall restarts */
-	jsr	$26, do_notify_resume
-	mov	$9, $19
-	mov	$10, $20
+	jsr	$26, do_work_pending
 	bsr	$1, undo_switch_stack
-	br	ret_to_user
+	br	restore_all
 .end work_pending
 
 /*
@@ -454,9 +438,9 @@
 
 	.align	3
 $strace_error:
-	ldq	$19, 0($sp)	/* old syscall nr (zero if success) */
-	beq	$19, $strace_success
-	ldq	$20, 72($sp)	/* .. and this a3 */
+	ldq	$18, 0($sp)	/* old syscall nr (zero if success) */
+	beq	$18, $strace_success
+	ldq	$19, 72($sp)	/* .. and this a3 */
 
 	subq	$31, $0, $0	/* with error in v0 */
 	addq	$31, 1, $1	/* set a3 for errno return */
@@ -464,11 +448,11 @@
 	stq	$1, 72($sp)	/* a3 for return */
 
 	bsr	$1, do_switch_stack
-	mov	$19, $9		/* save old syscall number */
-	mov	$20, $10	/* save old a3 */
+	mov	$18, $9		/* save old syscall number */
+	mov	$19, $10	/* save old a3 */
 	jsr	$26, syscall_trace_leave
-	mov	$9, $19
-	mov	$10, $20
+	mov	$9, $18
+	mov	$10, $19
 	bsr	$1, undo_switch_stack
 
 	mov	$31, $26	/* tell "ret_from_sys_call" we can restart */
@@ -619,24 +603,9 @@
 	mov	$9, $27
 	mov	$10, $16
 	jsr	$26, ($9)
-	ldgp	$gp, 0($26)
-	mov	$0, $16
-	mov	$31, $26
-	jmp	$31, sys_exit
-.end ret_from_kernel_thread
-
-	.globl	ret_from_kernel_execve
-	.align	4
-	.ent	ret_from_kernel_execve
-ret_from_kernel_execve:
-	mov	$16, $sp
-	/* Avoid the HAE being gratuitously wrong, to avoid restoring it.  */
-	ldq	$2, alpha_mv+HAE_CACHE
-	stq	$2, 152($sp)		/* HAE */
 	mov	$31, $19		/* to disable syscall restarts */
 	br	$31, ret_to_user
-
-.end	ret_from_kernel_execve
+.end ret_from_kernel_thread
 
 
 /*
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 63e77e3..9eb0905 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -449,7 +449,7 @@
 {
 	int retval;
 	struct cdfs_args tmp;
-	char *devname;
+	struct filename *devname;
 
 	retval = -EFAULT;
 	if (copy_from_user(&tmp, args, sizeof(tmp)))
@@ -458,7 +458,7 @@
 	retval = PTR_ERR(devname);
 	if (IS_ERR(devname))
 		goto out;
-	retval = do_mount(devname, dirname, "ext2", flags, NULL);
+	retval = do_mount(devname->name, dirname, "ext2", flags, NULL);
 	putname(devname);
  out:
 	return retval;
@@ -469,7 +469,7 @@
 {
 	int retval;
 	struct cdfs_args tmp;
-	char *devname;
+	struct filename *devname;
 
 	retval = -EFAULT;
 	if (copy_from_user(&tmp, args, sizeof(tmp)))
@@ -478,7 +478,7 @@
 	retval = PTR_ERR(devname);
 	if (IS_ERR(devname))
 		goto out;
-	retval = do_mount(devname, dirname, "iso9660", flags, NULL);
+	retval = do_mount(devname->name, dirname, "iso9660", flags, NULL);
 	putname(devname);
  out:
 	return retval;
@@ -499,7 +499,7 @@
 		int, flag, void __user *, data)
 {
 	int retval;
-	char *name;
+	struct filename *name;
 
 	name = getname(path);
 	retval = PTR_ERR(name);
@@ -507,13 +507,13 @@
 		goto out;
 	switch (typenr) {
 	case 1:
-		retval = osf_ufs_mount(name, data, flag);
+		retval = osf_ufs_mount(name->name, data, flag);
 		break;
 	case 6:
-		retval = osf_cdfs_mount(name, data, flag);
+		retval = osf_cdfs_mount(name->name, data, flag);
 		break;
 	case 9:
-		retval = osf_procfs_mount(name, data, flag);
+		retval = osf_procfs_mount(name->name, data, flag);
 		break;
 	default:
 		retval = -EINVAL;
diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index a8c97d4..32575f8 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -298,8 +298,9 @@
 
 static long
 setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, 
-		 struct switch_stack *sw, unsigned long mask, unsigned long sp)
+		 unsigned long mask, unsigned long sp)
 {
+	struct switch_stack *sw = (struct switch_stack *)regs - 1;
 	long i, err = 0;
 
 	err |= __put_user(on_sig_stack((unsigned long)sc), &sc->sc_onstack);
@@ -354,7 +355,7 @@
 
 static int
 setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
-	    struct pt_regs *regs, struct switch_stack * sw)
+	    struct pt_regs *regs)
 {
 	unsigned long oldsp, r26, err = 0;
 	struct sigframe __user *frame;
@@ -364,7 +365,7 @@
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		return -EFAULT;
 
-	err |= setup_sigcontext(&frame->sc, regs, sw, set->sig[0], oldsp);
+	err |= setup_sigcontext(&frame->sc, regs, set->sig[0], oldsp);
 	if (err)
 		return -EFAULT;
 
@@ -401,7 +402,7 @@
 
 static int
 setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-	       sigset_t *set, struct pt_regs *regs, struct switch_stack * sw)
+	       sigset_t *set, struct pt_regs *regs)
 {
 	unsigned long oldsp, r26, err = 0;
 	struct rt_sigframe __user *frame;
@@ -420,7 +421,7 @@
 	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(oldsp), &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, sw,
+	err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, 
 				set->sig[0], oldsp);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)
@@ -464,15 +465,15 @@
  */
 static inline void
 handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info,
-	      struct pt_regs * regs, struct switch_stack *sw)
+	      struct pt_regs * regs)
 {
 	sigset_t *oldset = sigmask_to_save();
 	int ret;
 
 	if (ka->sa.sa_flags & SA_SIGINFO)
-		ret = setup_rt_frame(sig, ka, info, oldset, regs, sw);
+		ret = setup_rt_frame(sig, ka, info, oldset, regs);
 	else
-		ret = setup_frame(sig, ka, oldset, regs, sw);
+		ret = setup_frame(sig, ka, oldset, regs);
 
 	if (ret) {
 		force_sigsegv(sig, current);
@@ -519,8 +520,7 @@
  * all (if we get here from anything but a syscall return, it will be 0)
  */
 static void
-do_signal(struct pt_regs * regs, struct switch_stack * sw,
-	  unsigned long r0, unsigned long r19)
+do_signal(struct pt_regs *regs, unsigned long r0, unsigned long r19)
 {
 	siginfo_t info;
 	int signr;
@@ -537,7 +537,7 @@
 		/* Whee!  Actually deliver the signal.  */
 		if (r0)
 			syscall_restart(r0, r19, regs, &ka);
-		handle_signal(signr, &ka, &info, regs, sw);
+		handle_signal(signr, &ka, &info, regs);
 		if (single_stepping) 
 			ptrace_set_bpt(current); /* re-set bpt */
 		return;
@@ -568,15 +568,23 @@
 }
 
 void
-do_notify_resume(struct pt_regs *regs, struct switch_stack *sw,
-		 unsigned long thread_info_flags,
+do_work_pending(struct pt_regs *regs, unsigned long thread_flags,
 		 unsigned long r0, unsigned long r19)
 {
-	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal(regs, sw, r0, r19);
-
-	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
-		tracehook_notify_resume(regs);
-	}
+	do {
+		if (thread_flags & _TIF_NEED_RESCHED) {
+			schedule();
+		} else {
+			local_irq_enable();
+			if (thread_flags & _TIF_SIGPENDING) {
+				do_signal(regs, r0, r19);
+				r0 = 0;
+			} else {
+				clear_thread_flag(TIF_NOTIFY_RESUME);
+				tracehook_notify_resume(regs);
+			}
+		}
+		local_irq_disable();
+		thread_flags = current_thread_info()->flags;
+	} while (thread_flags & _TIF_WORK_MASK);
 }
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1bc092e..261fdd0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,6 +12,7 @@
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_KERNEL_THREAD
+	select GENERIC_KERNEL_EXECVE
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_STRNCPY_FROM_USER
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 202bc3a..8f60b6e 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -42,7 +42,6 @@
 #define __ARCH_WANT_SYS_SOCKETCALL
 #endif
 #define __ARCH_WANT_SYS_EXECVE
-#define __ARCH_WANT_KERNEL_EXECVE
 
 /*
  * "Conditional" syscalls
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index e340fa1..417bac1 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -86,35 +86,14 @@
  */
 ENTRY(ret_from_fork)
 	bl	schedule_tail
+	cmp	r5, #0
+	movne	r0, r4
+	movne	lr, pc
+	movne	pc, r5
 	get_thread_info tsk
-	mov	why, #1
 	b	ret_slow_syscall
 ENDPROC(ret_from_fork)
 
-ENTRY(ret_from_kernel_thread)
- UNWIND(.fnstart)
- UNWIND(.cantunwind)
-	bl	schedule_tail
-	mov	r0, r4
-	adr	lr, BSYM(1f)	@ kernel threads should not exit
-	mov	pc, r5
-1:	bl	do_exit
-	nop
- UNWIND(.fnend)
-ENDPROC(ret_from_kernel_thread)
-
-/*
- * turn a kernel thread into userland process
- * use: ret_from_kernel_execve(struct pt_regs *normal)
- */
-ENTRY(ret_from_kernel_execve)
-	mov	why, #0			@ not a syscall
-	str	why, [r0, #S_R0]	@ ... and we want 0 in ->ARM_r0 as well
-	get_thread_info tsk		@ thread structure
-	mov	sp, r0			@ stack pointer just under pt_regs
-	b	ret_slow_syscall
-ENDPROC(ret_from_kernel_execve)
-
 	.equ NR_syscalls,0
 #define CALL(x) .equ NR_syscalls,NR_syscalls+1
 #include "calls.S"
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index f98c17f..90084a6 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -373,7 +373,6 @@
 }
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
-asmlinkage void ret_from_kernel_thread(void) __asm__("ret_from_kernel_thread");
 
 int
 copy_thread(unsigned long clone_flags, unsigned long stack_start,
@@ -388,13 +387,13 @@
 		*childregs = *regs;
 		childregs->ARM_r0 = 0;
 		childregs->ARM_sp = stack_start;
-		thread->cpu_context.pc = (unsigned long)ret_from_fork;
 	} else {
+		memset(childregs, 0, sizeof(struct pt_regs));
 		thread->cpu_context.r4 = stk_sz;
 		thread->cpu_context.r5 = stack_start;
-		thread->cpu_context.pc = (unsigned long)ret_from_kernel_thread;
 		childregs->ARM_cpsr = SVC_MODE;
 	}
+	thread->cpu_context.pc = (unsigned long)ret_from_fork;
 	thread->cpu_context.sp = (unsigned long)childregs;
 
 	clear_ptrace_hw_breakpoint(p);
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index 35924a5..fe77e51 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -1,6 +1,4 @@
-include include/asm-generic/Kbuild.asm
 
-header-y += hwcap.h
 
 generic-y += bug.h
 generic-y += bugs.h
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
index db05f97..6d4482f 100644
--- a/arch/arm64/include/asm/hwcap.h
+++ b/arch/arm64/include/asm/hwcap.h
@@ -16,11 +16,7 @@
 #ifndef __ASM_HWCAP_H
 #define __ASM_HWCAP_H
 
-/*
- * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
- */
-#define HWCAP_FP		(1 << 0)
-#define HWCAP_ASIMD		(1 << 1)
+#include <uapi/asm/hwcap.h>
 
 #define COMPAT_HWCAP_HALF	(1 << 1)
 #define COMPAT_HWCAP_THUMB	(1 << 2)
@@ -35,7 +31,6 @@
 #define COMPAT_HWCAP_IDIVT	(1 << 18)
 #define COMPAT_HWCAP_IDIV	(COMPAT_HWCAP_IDIVA|COMPAT_HWCAP_IDIVT)
 
-#ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 /*
  * This yields a mask that user programs can use to figure out what
@@ -51,5 +46,3 @@
 extern unsigned int elf_hwcap;
 #endif
 #endif
-
-#endif
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 0fa5d6c..b04d340 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -19,9 +19,7 @@
 #ifndef __ASM_PTRACE_H
 #define __ASM_PTRACE_H
 
-#include <linux/types.h>
-
-#include <asm/hwcap.h>
+#include <uapi/asm/ptrace.h>
 
 /* AArch32-specific ptrace requests */
 #define COMPAT_PTRACE_GETREGS		12
@@ -32,80 +30,18 @@
 #define COMPAT_PTRACE_SETVFPREGS	28
 #define COMPAT_PTRACE_GETHBPREGS	29
 #define COMPAT_PTRACE_SETHBPREGS	30
-
-/*
- * PSR bits
- */
-#define PSR_MODE_EL0t	0x00000000
-#define PSR_MODE_EL1t	0x00000004
-#define PSR_MODE_EL1h	0x00000005
-#define PSR_MODE_EL2t	0x00000008
-#define PSR_MODE_EL2h	0x00000009
-#define PSR_MODE_EL3t	0x0000000c
-#define PSR_MODE_EL3h	0x0000000d
-#define PSR_MODE_MASK	0x0000000f
-
-/* AArch32 CPSR bits */
-#define PSR_MODE32_BIT		0x00000010
 #define COMPAT_PSR_MODE_USR	0x00000010
 #define COMPAT_PSR_T_BIT	0x00000020
 #define COMPAT_PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
-
-/* AArch64 SPSR bits */
-#define PSR_F_BIT	0x00000040
-#define PSR_I_BIT	0x00000080
-#define PSR_A_BIT	0x00000100
-#define PSR_D_BIT	0x00000200
-#define PSR_Q_BIT	0x08000000
-#define PSR_V_BIT	0x10000000
-#define PSR_C_BIT	0x20000000
-#define PSR_Z_BIT	0x40000000
-#define PSR_N_BIT	0x80000000
-
-/*
- * Groups of PSR bits
- */
-#define PSR_f		0xff000000	/* Flags		*/
-#define PSR_s		0x00ff0000	/* Status		*/
-#define PSR_x		0x0000ff00	/* Extension		*/
-#define PSR_c		0x000000ff	/* Control		*/
-
 /*
  * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
  * process is located in memory.
  */
-#define PT_TEXT_ADDR		0x10000
-#define PT_DATA_ADDR		0x10004
-#define PT_TEXT_END_ADDR	0x10008
-
+#define COMPAT_PT_TEXT_ADDR		0x10000
+#define COMPAT_PT_DATA_ADDR		0x10004
+#define COMPAT_PT_TEXT_END_ADDR		0x10008
 #ifndef __ASSEMBLY__
 
-/*
- * User structures for general purpose, floating point and debug registers.
- */
-struct user_pt_regs {
-	__u64		regs[31];
-	__u64		sp;
-	__u64		pc;
-	__u64		pstate;
-};
-
-struct user_fpsimd_state {
-	__uint128_t	vregs[32];
-	__u32		fpsr;
-	__u32		fpcr;
-};
-
-struct user_hwdebug_state {
-	__u32		dbg_info;
-	struct {
-		__u64	addr;
-		__u32	ctrl;
-	}		dbg_regs[16];
-};
-
-#ifdef __KERNEL__
-
 /* sizeof(struct user) for AArch32 */
 #define COMPAT_USER_SZ	296
 /* AArch32 uses x13 as the stack pointer... */
@@ -200,8 +136,5 @@
 
 extern int aarch32_break_trap(struct pt_regs *regs);
 
-#endif /* __KERNEL__ */
-
 #endif /* __ASSEMBLY__ */
-
 #endif
diff --git a/arch/arm64/include/asm/sigcontext.h b/arch/arm64/include/asm/sigcontext.h
index 573cec7..dca1094 100644
--- a/arch/arm64/include/asm/sigcontext.h
+++ b/arch/arm64/include/asm/sigcontext.h
@@ -16,45 +16,9 @@
 #ifndef __ASM_SIGCONTEXT_H
 #define __ASM_SIGCONTEXT_H
 
-#include <linux/types.h>
+#include <uapi/asm/sigcontext.h>
 
 /*
- * Signal context structure - contains all info to do with the state
- * before the signal handler was invoked.
- */
-struct sigcontext {
-	__u64 fault_address;
-	/* AArch64 registers */
-	__u64 regs[31];
-	__u64 sp;
-	__u64 pc;
-	__u64 pstate;
-	/* 4K reserved for FP/SIMD state and future expansion */
-	__u8 __reserved[4096] __attribute__((__aligned__(16)));
-};
-
-/*
- * Header to be used at the beginning of structures extending the user
- * context. Such structures must be placed after the rt_sigframe on the stack
- * and be 16-byte aligned. The last structure must be a dummy one with the
- * magic and size set to 0.
- */
-struct _aarch64_ctx {
-	__u32 magic;
-	__u32 size;
-};
-
-#define FPSIMD_MAGIC	0x46508001
-
-struct fpsimd_context {
-	struct _aarch64_ctx head;
-	__u32 fpsr;
-	__u32 fpcr;
-	__uint128_t vregs[32];
-};
-
-#ifdef __KERNEL__
-/*
  * Auxiliary context saved in the sigcontext.__reserved array. Not exported to
  * user space as it will change with the addition of new context. User space
  * should check the magic/size information.
@@ -65,5 +29,3 @@
 	struct _aarch64_ctx end;
 };
 #endif
-
-#endif
diff --git a/arch/arm64/include/asm/stat.h b/arch/arm64/include/asm/stat.h
index a9f580c..15e3559 100644
--- a/arch/arm64/include/asm/stat.h
+++ b/arch/arm64/include/asm/stat.h
@@ -16,9 +16,8 @@
 #ifndef __ASM_STAT_H
 #define __ASM_STAT_H
 
-#include <asm-generic/stat.h>
+#include <uapi/asm/stat.h>
 
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 
 #include <asm/compat.h>
@@ -60,5 +59,3 @@
 
 #endif
 #endif
-
-#endif
diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
index 8f03dee..63f853f 100644
--- a/arch/arm64/include/asm/unistd.h
+++ b/arch/arm64/include/asm/unistd.h
@@ -13,13 +13,17 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-
-#ifndef __SYSCALL_COMPAT
-#include <asm-generic/unistd.h>
-#endif
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
-#include <asm/unistd32.h>
+#define __ARCH_WANT_COMPAT_IPC_PARSE_VERSION
+#define __ARCH_WANT_COMPAT_STAT64
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_COMPAT_SYS_SENDFILE
 #endif
-#endif
+#include <uapi/asm/unistd.h>
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index ba42d41..6d909fa 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -1,5 +1,5 @@
 /*
- * Based on arch/arm/include/asm/unistd.h
+ * AArch32 (compat) system call definitions.
  *
  * Copyright (C) 2001-2005 Russell King
  * Copyright (C) 2012 ARM Ltd.
@@ -21,715 +21,390 @@
 #define __SYSCALL(x, y)
 #endif
 
+__SYSCALL(0,   sys_restart_syscall)
+__SYSCALL(1,   sys_exit)
+__SYSCALL(2,   compat_sys_fork_wrapper)
+__SYSCALL(3,   sys_read)
+__SYSCALL(4,   sys_write)
+__SYSCALL(5,   compat_sys_open)
+__SYSCALL(6,   sys_close)
+__SYSCALL(7,   sys_ni_syscall)			/* 7 was sys_waitpid */
+__SYSCALL(8,   sys_creat)
+__SYSCALL(9,   sys_link)
+__SYSCALL(10,  sys_unlink)
+__SYSCALL(11,  compat_sys_execve_wrapper)
+__SYSCALL(12,  sys_chdir)
+__SYSCALL(13,  sys_ni_syscall)			/* 13 was sys_time */
+__SYSCALL(14,  sys_mknod)
+__SYSCALL(15,  sys_chmod)
+__SYSCALL(16,  sys_lchown16)
+__SYSCALL(17,  sys_ni_syscall)			/* 17 was sys_break */
+__SYSCALL(18,  sys_ni_syscall)			/* 18 was sys_stat */
+__SYSCALL(19,  compat_sys_lseek_wrapper)
+__SYSCALL(20,  sys_getpid)
+__SYSCALL(21,  compat_sys_mount)
+__SYSCALL(22,  sys_ni_syscall)			/* 22 was sys_umount */
+__SYSCALL(23,  sys_setuid16)
+__SYSCALL(24,  sys_getuid16)
+__SYSCALL(25,  sys_ni_syscall)			/* 25 was sys_stime */
+__SYSCALL(26,  compat_sys_ptrace)
+__SYSCALL(27,  sys_ni_syscall)			/* 27 was sys_alarm */
+__SYSCALL(28,  sys_ni_syscall)			/* 28 was sys_fstat */
+__SYSCALL(29,  sys_pause)
+__SYSCALL(30,  sys_ni_syscall)			/* 30 was sys_utime */
+__SYSCALL(31,  sys_ni_syscall)			/* 31 was sys_stty */
+__SYSCALL(32,  sys_ni_syscall)			/* 32 was sys_gtty */
+__SYSCALL(33,  sys_access)
+__SYSCALL(34,  sys_nice)
+__SYSCALL(35,  sys_ni_syscall)			/* 35 was sys_ftime */
+__SYSCALL(36,  sys_sync)
+__SYSCALL(37,  sys_kill)
+__SYSCALL(38,  sys_rename)
+__SYSCALL(39,  sys_mkdir)
+__SYSCALL(40,  sys_rmdir)
+__SYSCALL(41,  sys_dup)
+__SYSCALL(42,  sys_pipe)
+__SYSCALL(43,  compat_sys_times)
+__SYSCALL(44,  sys_ni_syscall)			/* 44 was sys_prof */
+__SYSCALL(45,  sys_brk)
+__SYSCALL(46,  sys_setgid16)
+__SYSCALL(47,  sys_getgid16)
+__SYSCALL(48,  sys_ni_syscall)			/* 48 was sys_signal */
+__SYSCALL(49,  sys_geteuid16)
+__SYSCALL(50,  sys_getegid16)
+__SYSCALL(51,  sys_acct)
+__SYSCALL(52,  sys_umount)
+__SYSCALL(53,  sys_ni_syscall)			/* 53 was sys_lock */
+__SYSCALL(54,  compat_sys_ioctl)
+__SYSCALL(55,  compat_sys_fcntl)
+__SYSCALL(56,  sys_ni_syscall)			/* 56 was sys_mpx */
+__SYSCALL(57,  sys_setpgid)
+__SYSCALL(58,  sys_ni_syscall)			/* 58 was sys_ulimit */
+__SYSCALL(59,  sys_ni_syscall)			/* 59 was sys_olduname */
+__SYSCALL(60,  sys_umask)
+__SYSCALL(61,  sys_chroot)
+__SYSCALL(62,  compat_sys_ustat)
+__SYSCALL(63,  sys_dup2)
+__SYSCALL(64,  sys_getppid)
+__SYSCALL(65,  sys_getpgrp)
+__SYSCALL(66,  sys_setsid)
+__SYSCALL(67,  compat_sys_sigaction)
+__SYSCALL(68,  sys_ni_syscall)			/* 68 was sys_sgetmask */
+__SYSCALL(69,  sys_ni_syscall)			/* 69 was sys_ssetmask */
+__SYSCALL(70,  sys_setreuid16)
+__SYSCALL(71,  sys_setregid16)
+__SYSCALL(72,  compat_sys_sigsuspend)
+__SYSCALL(73,  compat_sys_sigpending)
+__SYSCALL(74,  sys_sethostname)
+__SYSCALL(75,  compat_sys_setrlimit)
+__SYSCALL(76,  sys_ni_syscall)			/* 76 was compat_sys_getrlimit */
+__SYSCALL(77,  compat_sys_getrusage)
+__SYSCALL(78,  compat_sys_gettimeofday)
+__SYSCALL(79,  compat_sys_settimeofday)
+__SYSCALL(80,  sys_getgroups16)
+__SYSCALL(81,  sys_setgroups16)
+__SYSCALL(82,  sys_ni_syscall)			/* 82 was compat_sys_select */
+__SYSCALL(83,  sys_symlink)
+__SYSCALL(84,  sys_ni_syscall)			/* 84 was sys_lstat */
+__SYSCALL(85,  sys_readlink)
+__SYSCALL(86,  sys_uselib)
+__SYSCALL(87,  sys_swapon)
+__SYSCALL(88,  sys_reboot)
+__SYSCALL(89,  sys_ni_syscall)			/* 89 was sys_readdir */
+__SYSCALL(90,  sys_ni_syscall)			/* 90 was sys_mmap */
+__SYSCALL(91,  sys_munmap)
+__SYSCALL(92,  sys_truncate)
+__SYSCALL(93,  sys_ftruncate)
+__SYSCALL(94,  sys_fchmod)
+__SYSCALL(95,  sys_fchown16)
+__SYSCALL(96,  sys_getpriority)
+__SYSCALL(97,  sys_setpriority)
+__SYSCALL(98,  sys_ni_syscall)			/* 98 was sys_profil */
+__SYSCALL(99,  compat_sys_statfs)
+__SYSCALL(100, compat_sys_fstatfs)
+__SYSCALL(101, sys_ni_syscall)			/* 101 was sys_ioperm */
+__SYSCALL(102, sys_ni_syscall)			/* 102 was sys_socketcall */
+__SYSCALL(103, sys_syslog)
+__SYSCALL(104, compat_sys_setitimer)
+__SYSCALL(105, compat_sys_getitimer)
+__SYSCALL(106, compat_sys_newstat)
+__SYSCALL(107, compat_sys_newlstat)
+__SYSCALL(108, compat_sys_newfstat)
+__SYSCALL(109, sys_ni_syscall)			/* 109 was sys_uname */
+__SYSCALL(110, sys_ni_syscall)			/* 110 was sys_iopl */
+__SYSCALL(111, sys_vhangup)
+__SYSCALL(112, sys_ni_syscall)			/* 112 was sys_idle */
+__SYSCALL(113, sys_ni_syscall)			/* 113 was sys_syscall */
+__SYSCALL(114, compat_sys_wait4)
+__SYSCALL(115, sys_swapoff)
+__SYSCALL(116, compat_sys_sysinfo)
+__SYSCALL(117, sys_ni_syscall)			/* 117 was sys_ipc */
+__SYSCALL(118, sys_fsync)
+__SYSCALL(119, compat_sys_sigreturn_wrapper)
+__SYSCALL(120, compat_sys_clone_wrapper)
+__SYSCALL(121, sys_setdomainname)
+__SYSCALL(122, sys_newuname)
+__SYSCALL(123, sys_ni_syscall)			/* 123 was sys_modify_ldt */
+__SYSCALL(124, compat_sys_adjtimex)
+__SYSCALL(125, sys_mprotect)
+__SYSCALL(126, compat_sys_sigprocmask)
+__SYSCALL(127, sys_ni_syscall)			/* 127 was sys_create_module */
+__SYSCALL(128, sys_init_module)
+__SYSCALL(129, sys_delete_module)
+__SYSCALL(130, sys_ni_syscall)			/* 130 was sys_get_kernel_syms */
+__SYSCALL(131, sys_quotactl)
+__SYSCALL(132, sys_getpgid)
+__SYSCALL(133, sys_fchdir)
+__SYSCALL(134, sys_bdflush)
+__SYSCALL(135, sys_sysfs)
+__SYSCALL(136, sys_personality)
+__SYSCALL(137, sys_ni_syscall)			/* 137 was sys_afs_syscall */
+__SYSCALL(138, sys_setfsuid16)
+__SYSCALL(139, sys_setfsgid16)
+__SYSCALL(140, sys_llseek)
+__SYSCALL(141, compat_sys_getdents)
+__SYSCALL(142, compat_sys_select)
+__SYSCALL(143, sys_flock)
+__SYSCALL(144, sys_msync)
+__SYSCALL(145, compat_sys_readv)
+__SYSCALL(146, compat_sys_writev)
+__SYSCALL(147, sys_getsid)
+__SYSCALL(148, sys_fdatasync)
+__SYSCALL(149, compat_sys_sysctl)
+__SYSCALL(150, sys_mlock)
+__SYSCALL(151, sys_munlock)
+__SYSCALL(152, sys_mlockall)
+__SYSCALL(153, sys_munlockall)
+__SYSCALL(154, sys_sched_setparam)
+__SYSCALL(155, sys_sched_getparam)
+__SYSCALL(156, sys_sched_setscheduler)
+__SYSCALL(157, sys_sched_getscheduler)
+__SYSCALL(158, sys_sched_yield)
+__SYSCALL(159, sys_sched_get_priority_max)
+__SYSCALL(160, sys_sched_get_priority_min)
+__SYSCALL(161, compat_sys_sched_rr_get_interval)
+__SYSCALL(162, compat_sys_nanosleep)
+__SYSCALL(163, sys_mremap)
+__SYSCALL(164, sys_setresuid16)
+__SYSCALL(165, sys_getresuid16)
+__SYSCALL(166, sys_ni_syscall)			/* 166 was sys_vm86 */
+__SYSCALL(167, sys_ni_syscall)			/* 167 was sys_query_module */
+__SYSCALL(168, sys_poll)
+__SYSCALL(169, sys_ni_syscall)
+__SYSCALL(170, sys_setresgid16)
+__SYSCALL(171, sys_getresgid16)
+__SYSCALL(172, sys_prctl)
+__SYSCALL(173, compat_sys_rt_sigreturn_wrapper)
+__SYSCALL(174, compat_sys_rt_sigaction)
+__SYSCALL(175, compat_sys_rt_sigprocmask)
+__SYSCALL(176, compat_sys_rt_sigpending)
+__SYSCALL(177, compat_sys_rt_sigtimedwait)
+__SYSCALL(178, compat_sys_rt_sigqueueinfo)
+__SYSCALL(179, compat_sys_rt_sigsuspend)
+__SYSCALL(180, compat_sys_pread64_wrapper)
+__SYSCALL(181, compat_sys_pwrite64_wrapper)
+__SYSCALL(182, sys_chown16)
+__SYSCALL(183, sys_getcwd)
+__SYSCALL(184, sys_capget)
+__SYSCALL(185, sys_capset)
+__SYSCALL(186, compat_sys_sigaltstack_wrapper)
+__SYSCALL(187, compat_sys_sendfile)
+__SYSCALL(188, sys_ni_syscall)			/* 188 reserved */
+__SYSCALL(189, sys_ni_syscall)			/* 189 reserved */
+__SYSCALL(190, compat_sys_vfork_wrapper)
+__SYSCALL(191, compat_sys_getrlimit)		/* SuS compliant getrlimit */
+__SYSCALL(192, sys_mmap_pgoff)
+__SYSCALL(193, compat_sys_truncate64_wrapper)
+__SYSCALL(194, compat_sys_ftruncate64_wrapper)
+__SYSCALL(195, sys_stat64)
+__SYSCALL(196, sys_lstat64)
+__SYSCALL(197, sys_fstat64)
+__SYSCALL(198, sys_lchown)
+__SYSCALL(199, sys_getuid)
+__SYSCALL(200, sys_getgid)
+__SYSCALL(201, sys_geteuid)
+__SYSCALL(202, sys_getegid)
+__SYSCALL(203, sys_setreuid)
+__SYSCALL(204, sys_setregid)
+__SYSCALL(205, sys_getgroups)
+__SYSCALL(206, sys_setgroups)
+__SYSCALL(207, sys_fchown)
+__SYSCALL(208, sys_setresuid)
+__SYSCALL(209, sys_getresuid)
+__SYSCALL(210, sys_setresgid)
+__SYSCALL(211, sys_getresgid)
+__SYSCALL(212, sys_chown)
+__SYSCALL(213, sys_setuid)
+__SYSCALL(214, sys_setgid)
+__SYSCALL(215, sys_setfsuid)
+__SYSCALL(216, sys_setfsgid)
+__SYSCALL(217, compat_sys_getdents64)
+__SYSCALL(218, sys_pivot_root)
+__SYSCALL(219, sys_mincore)
+__SYSCALL(220, sys_madvise)
+__SYSCALL(221, compat_sys_fcntl64)
+__SYSCALL(222, sys_ni_syscall)			/* 222 for tux */
+__SYSCALL(223, sys_ni_syscall)			/* 223 is unused */
+__SYSCALL(224, sys_gettid)
+__SYSCALL(225, compat_sys_readahead_wrapper)
+__SYSCALL(226, sys_setxattr)
+__SYSCALL(227, sys_lsetxattr)
+__SYSCALL(228, sys_fsetxattr)
+__SYSCALL(229, sys_getxattr)
+__SYSCALL(230, sys_lgetxattr)
+__SYSCALL(231, sys_fgetxattr)
+__SYSCALL(232, sys_listxattr)
+__SYSCALL(233, sys_llistxattr)
+__SYSCALL(234, sys_flistxattr)
+__SYSCALL(235, sys_removexattr)
+__SYSCALL(236, sys_lremovexattr)
+__SYSCALL(237, sys_fremovexattr)
+__SYSCALL(238, sys_tkill)
+__SYSCALL(239, sys_sendfile64)
+__SYSCALL(240, compat_sys_futex)
+__SYSCALL(241, compat_sys_sched_setaffinity)
+__SYSCALL(242, compat_sys_sched_getaffinity)
+__SYSCALL(243, compat_sys_io_setup)
+__SYSCALL(244, sys_io_destroy)
+__SYSCALL(245, compat_sys_io_getevents)
+__SYSCALL(246, compat_sys_io_submit)
+__SYSCALL(247, sys_io_cancel)
+__SYSCALL(248, sys_exit_group)
+__SYSCALL(249, compat_sys_lookup_dcookie)
+__SYSCALL(250, sys_epoll_create)
+__SYSCALL(251, sys_epoll_ctl)
+__SYSCALL(252, sys_epoll_wait)
+__SYSCALL(253, sys_remap_file_pages)
+__SYSCALL(254, sys_ni_syscall)			/* 254 for set_thread_area */
+__SYSCALL(255, sys_ni_syscall)			/* 255 for get_thread_area */
+__SYSCALL(256, sys_set_tid_address)
+__SYSCALL(257, compat_sys_timer_create)
+__SYSCALL(258, compat_sys_timer_settime)
+__SYSCALL(259, compat_sys_timer_gettime)
+__SYSCALL(260, sys_timer_getoverrun)
+__SYSCALL(261, sys_timer_delete)
+__SYSCALL(262, compat_sys_clock_settime)
+__SYSCALL(263, compat_sys_clock_gettime)
+__SYSCALL(264, compat_sys_clock_getres)
+__SYSCALL(265, compat_sys_clock_nanosleep)
+__SYSCALL(266, compat_sys_statfs64_wrapper)
+__SYSCALL(267, compat_sys_fstatfs64_wrapper)
+__SYSCALL(268, sys_tgkill)
+__SYSCALL(269, compat_sys_utimes)
+__SYSCALL(270, compat_sys_fadvise64_64_wrapper)
+__SYSCALL(271, sys_pciconfig_iobase)
+__SYSCALL(272, sys_pciconfig_read)
+__SYSCALL(273, sys_pciconfig_write)
+__SYSCALL(274, compat_sys_mq_open)
+__SYSCALL(275, sys_mq_unlink)
+__SYSCALL(276, compat_sys_mq_timedsend)
+__SYSCALL(277, compat_sys_mq_timedreceive)
+__SYSCALL(278, compat_sys_mq_notify)
+__SYSCALL(279, compat_sys_mq_getsetattr)
+__SYSCALL(280, compat_sys_waitid)
+__SYSCALL(281, sys_socket)
+__SYSCALL(282, sys_bind)
+__SYSCALL(283, sys_connect)
+__SYSCALL(284, sys_listen)
+__SYSCALL(285, sys_accept)
+__SYSCALL(286, sys_getsockname)
+__SYSCALL(287, sys_getpeername)
+__SYSCALL(288, sys_socketpair)
+__SYSCALL(289, sys_send)
+__SYSCALL(290, sys_sendto)
+__SYSCALL(291, compat_sys_recv)
+__SYSCALL(292, compat_sys_recvfrom)
+__SYSCALL(293, sys_shutdown)
+__SYSCALL(294, compat_sys_setsockopt)
+__SYSCALL(295, compat_sys_getsockopt)
+__SYSCALL(296, compat_sys_sendmsg)
+__SYSCALL(297, compat_sys_recvmsg)
+__SYSCALL(298, sys_semop)
+__SYSCALL(299, sys_semget)
+__SYSCALL(300, compat_sys_semctl)
+__SYSCALL(301, compat_sys_msgsnd)
+__SYSCALL(302, compat_sys_msgrcv)
+__SYSCALL(303, sys_msgget)
+__SYSCALL(304, compat_sys_msgctl)
+__SYSCALL(305, compat_sys_shmat)
+__SYSCALL(306, sys_shmdt)
+__SYSCALL(307, sys_shmget)
+__SYSCALL(308, compat_sys_shmctl)
+__SYSCALL(309, sys_add_key)
+__SYSCALL(310, sys_request_key)
+__SYSCALL(311, compat_sys_keyctl)
+__SYSCALL(312, compat_sys_semtimedop)
+__SYSCALL(313, sys_ni_syscall)
+__SYSCALL(314, sys_ioprio_set)
+__SYSCALL(315, sys_ioprio_get)
+__SYSCALL(316, sys_inotify_init)
+__SYSCALL(317, sys_inotify_add_watch)
+__SYSCALL(318, sys_inotify_rm_watch)
+__SYSCALL(319, compat_sys_mbind)
+__SYSCALL(320, compat_sys_get_mempolicy)
+__SYSCALL(321, compat_sys_set_mempolicy)
+__SYSCALL(322, compat_sys_openat)
+__SYSCALL(323, sys_mkdirat)
+__SYSCALL(324, sys_mknodat)
+__SYSCALL(325, sys_fchownat)
+__SYSCALL(326, compat_sys_futimesat)
+__SYSCALL(327, sys_fstatat64)
+__SYSCALL(328, sys_unlinkat)
+__SYSCALL(329, sys_renameat)
+__SYSCALL(330, sys_linkat)
+__SYSCALL(331, sys_symlinkat)
+__SYSCALL(332, sys_readlinkat)
+__SYSCALL(333, sys_fchmodat)
+__SYSCALL(334, sys_faccessat)
+__SYSCALL(335, compat_sys_pselect6)
+__SYSCALL(336, compat_sys_ppoll)
+__SYSCALL(337, sys_unshare)
+__SYSCALL(338, compat_sys_set_robust_list)
+__SYSCALL(339, compat_sys_get_robust_list)
+__SYSCALL(340, sys_splice)
+__SYSCALL(341, compat_sys_sync_file_range2_wrapper)
+__SYSCALL(342, sys_tee)
+__SYSCALL(343, compat_sys_vmsplice)
+__SYSCALL(344, compat_sys_move_pages)
+__SYSCALL(345, sys_getcpu)
+__SYSCALL(346, compat_sys_epoll_pwait)
+__SYSCALL(347, compat_sys_kexec_load)
+__SYSCALL(348, compat_sys_utimensat)
+__SYSCALL(349, compat_sys_signalfd)
+__SYSCALL(350, sys_timerfd_create)
+__SYSCALL(351, sys_eventfd)
+__SYSCALL(352, compat_sys_fallocate_wrapper)
+__SYSCALL(353, compat_sys_timerfd_settime)
+__SYSCALL(354, compat_sys_timerfd_gettime)
+__SYSCALL(355, compat_sys_signalfd4)
+__SYSCALL(356, sys_eventfd2)
+__SYSCALL(357, sys_epoll_create1)
+__SYSCALL(358, sys_dup3)
+__SYSCALL(359, sys_pipe2)
+__SYSCALL(360, sys_inotify_init1)
+__SYSCALL(361, compat_sys_preadv)
+__SYSCALL(362, compat_sys_pwritev)
+__SYSCALL(363, compat_sys_rt_tgsigqueueinfo)
+__SYSCALL(364, sys_perf_event_open)
+__SYSCALL(365, compat_sys_recvmmsg)
+__SYSCALL(366, sys_accept4)
+__SYSCALL(367, sys_fanotify_init)
+__SYSCALL(368, compat_sys_fanotify_mark_wrapper)
+__SYSCALL(369, sys_prlimit64)
+__SYSCALL(370, sys_name_to_handle_at)
+__SYSCALL(371, sys_open_by_handle_at)
+__SYSCALL(372, sys_clock_adjtime)
+__SYSCALL(373, sys_syncfs)
+
+#define __NR_compat_syscalls		374
+
 /*
- * This file contains the system call numbers.
+ * Compat syscall numbers used by the AArch64 kernel.
  */
+#define __NR_compat_restart_syscall	0
+#define __NR_compat_sigreturn		119
+#define __NR_compat_rt_sigreturn	173
 
-#ifdef __SYSCALL_COMPAT
-
-#define __NR_restart_syscall		0
-__SYSCALL(__NR_restart_syscall, sys_restart_syscall)
-#define __NR_exit			1
-__SYSCALL(__NR_exit, sys_exit)
-#define __NR_fork			2
-__SYSCALL(__NR_fork, sys_fork)
-#define __NR_read			3
-__SYSCALL(__NR_read, sys_read)
-#define __NR_write			4
-__SYSCALL(__NR_write, sys_write)
-#define __NR_open			5
-__SYSCALL(__NR_open, sys_open)
-#define __NR_close			6
-__SYSCALL(__NR_close, sys_close)
-__SYSCALL(7, sys_ni_syscall)		/* 7 was sys_waitpid */
-#define __NR_creat			8
-__SYSCALL(__NR_creat, sys_creat)
-#define __NR_link			9
-__SYSCALL(__NR_link, sys_link)
-#define __NR_unlink			10
-__SYSCALL(__NR_unlink, sys_unlink)
-#define __NR_execve			11
-__SYSCALL(__NR_execve, sys_execve)
-#define __NR_chdir			12
-__SYSCALL(__NR_chdir, sys_chdir)
-__SYSCALL(13, sys_ni_syscall)		/* 13 was sys_time */
-#define __NR_mknod			14
-__SYSCALL(__NR_mknod, sys_mknod)
-#define __NR_chmod			15
-__SYSCALL(__NR_chmod, sys_chmod)
-#define __NR_lchown			16
-__SYSCALL(__NR_lchown, sys_lchown16)
-__SYSCALL(17, sys_ni_syscall)		/* 17 was sys_break */
-__SYSCALL(18, sys_ni_syscall)		/* 18 was sys_stat */
-#define __NR_lseek			19
-__SYSCALL(__NR_lseek, sys_lseek)
-#define __NR_getpid			20
-__SYSCALL(__NR_getpid, sys_getpid)
-#define __NR_mount			21
-__SYSCALL(__NR_mount, sys_mount)
-__SYSCALL(22, sys_ni_syscall)		/* 22 was sys_umount */
-#define __NR_setuid			23
-__SYSCALL(__NR_setuid, sys_setuid16)
-#define __NR_getuid			24
-__SYSCALL(__NR_getuid, sys_getuid16)
-__SYSCALL(25, sys_ni_syscall)		/* 25 was sys_stime */
-#define __NR_ptrace			26
-__SYSCALL(__NR_ptrace, sys_ptrace)
-__SYSCALL(27, sys_ni_syscall)		/* 27 was sys_alarm */
-__SYSCALL(28, sys_ni_syscall)		/* 28 was sys_fstat */
-#define __NR_pause			29
-__SYSCALL(__NR_pause, sys_pause)
-__SYSCALL(30, sys_ni_syscall)		/* 30 was sys_utime */
-__SYSCALL(31, sys_ni_syscall)		/* 31 was sys_stty */
-__SYSCALL(32, sys_ni_syscall)		/* 32 was sys_gtty */
-#define __NR_access			33
-__SYSCALL(__NR_access, sys_access)
-#define __NR_nice			34
-__SYSCALL(__NR_nice, sys_nice)
-__SYSCALL(35, sys_ni_syscall)		/* 35 was sys_ftime */
-#define __NR_sync			36
-__SYSCALL(__NR_sync, sys_sync)
-#define __NR_kill			37
-__SYSCALL(__NR_kill, sys_kill)
-#define __NR_rename			38
-__SYSCALL(__NR_rename, sys_rename)
-#define __NR_mkdir			39
-__SYSCALL(__NR_mkdir, sys_mkdir)
-#define __NR_rmdir			40
-__SYSCALL(__NR_rmdir, sys_rmdir)
-#define __NR_dup			41
-__SYSCALL(__NR_dup, sys_dup)
-#define __NR_pipe			42
-__SYSCALL(__NR_pipe, sys_pipe)
-#define __NR_times			43
-__SYSCALL(__NR_times, sys_times)
-__SYSCALL(44, sys_ni_syscall)		/* 44 was sys_prof */
-#define __NR_brk			45
-__SYSCALL(__NR_brk, sys_brk)
-#define __NR_setgid			46
-__SYSCALL(__NR_setgid, sys_setgid16)
-#define __NR_getgid			47
-__SYSCALL(__NR_getgid, sys_getgid16)
-__SYSCALL(48, sys_ni_syscall)		/* 48 was sys_signal */
-#define __NR_geteuid			49
-__SYSCALL(__NR_geteuid, sys_geteuid16)
-#define __NR_getegid			50
-__SYSCALL(__NR_getegid, sys_getegid16)
-#define __NR_acct			51
-__SYSCALL(__NR_acct, sys_acct)
-#define __NR_umount2			52
-__SYSCALL(__NR_umount2, sys_umount)
-__SYSCALL(53, sys_ni_syscall)		/* 53 was sys_lock */
-#define __NR_ioctl			54
-__SYSCALL(__NR_ioctl, sys_ioctl)
-#define __NR_fcntl			55
-__SYSCALL(__NR_fcntl, sys_fcntl)
-__SYSCALL(56, sys_ni_syscall)		/* 56 was sys_mpx */
-#define __NR_setpgid			57
-__SYSCALL(__NR_setpgid, sys_setpgid)
-__SYSCALL(58, sys_ni_syscall)		/* 58 was sys_ulimit */
-__SYSCALL(59, sys_ni_syscall)		/* 59 was sys_olduname */
-#define __NR_umask			60
-__SYSCALL(__NR_umask, sys_umask)
-#define __NR_chroot			61
-__SYSCALL(__NR_chroot, sys_chroot)
-#define __NR_ustat			62
-__SYSCALL(__NR_ustat, sys_ustat)
-#define __NR_dup2			63
-__SYSCALL(__NR_dup2, sys_dup2)
-#define __NR_getppid			64
-__SYSCALL(__NR_getppid, sys_getppid)
-#define __NR_getpgrp			65
-__SYSCALL(__NR_getpgrp, sys_getpgrp)
-#define __NR_setsid			66
-__SYSCALL(__NR_setsid, sys_setsid)
-#define __NR_sigaction			67
-__SYSCALL(__NR_sigaction, sys_sigaction)
-__SYSCALL(68, sys_ni_syscall)		/* 68 was sys_sgetmask */
-__SYSCALL(69, sys_ni_syscall)		/* 69 was sys_ssetmask */
-#define __NR_setreuid			70
-__SYSCALL(__NR_setreuid, sys_setreuid16)
-#define __NR_setregid			71
-__SYSCALL(__NR_setregid, sys_setregid16)
-#define __NR_sigsuspend			72
-__SYSCALL(__NR_sigsuspend, sys_sigsuspend)
-#define __NR_sigpending			73
-__SYSCALL(__NR_sigpending, sys_sigpending)
-#define __NR_sethostname		74
-__SYSCALL(__NR_sethostname, sys_sethostname)
-#define __NR_setrlimit			75
-__SYSCALL(__NR_setrlimit, sys_setrlimit)
-__SYSCALL(76, sys_ni_syscall)		/* 76 was sys_getrlimit */
-#define __NR_getrusage			77
-__SYSCALL(__NR_getrusage, sys_getrusage)
-#define __NR_gettimeofday		78
-__SYSCALL(__NR_gettimeofday, sys_gettimeofday)
-#define __NR_settimeofday		79
-__SYSCALL(__NR_settimeofday, sys_settimeofday)
-#define __NR_getgroups			80
-__SYSCALL(__NR_getgroups, sys_getgroups16)
-#define __NR_setgroups			81
-__SYSCALL(__NR_setgroups, sys_setgroups16)
-__SYSCALL(82, sys_ni_syscall)		/* 82 was sys_select */
-#define __NR_symlink			83
-__SYSCALL(__NR_symlink, sys_symlink)
-__SYSCALL(84, sys_ni_syscall)		/* 84 was sys_lstat */
-#define __NR_readlink			85
-__SYSCALL(__NR_readlink, sys_readlink)
-#define __NR_uselib			86
-__SYSCALL(__NR_uselib, sys_uselib)
-#define __NR_swapon			87
-__SYSCALL(__NR_swapon, sys_swapon)
-#define __NR_reboot			88
-__SYSCALL(__NR_reboot, sys_reboot)
-__SYSCALL(89, sys_ni_syscall)		/* 89 was sys_readdir */
-__SYSCALL(90, sys_ni_syscall)		/* 90 was sys_mmap */
-#define __NR_munmap			91
-__SYSCALL(__NR_munmap, sys_munmap)
-#define __NR_truncate			92
-__SYSCALL(__NR_truncate, sys_truncate)
-#define __NR_ftruncate			93
-__SYSCALL(__NR_ftruncate, sys_ftruncate)
-#define __NR_fchmod			94
-__SYSCALL(__NR_fchmod, sys_fchmod)
-#define __NR_fchown			95
-__SYSCALL(__NR_fchown, sys_fchown16)
-#define __NR_getpriority		96
-__SYSCALL(__NR_getpriority, sys_getpriority)
-#define __NR_setpriority		97
-__SYSCALL(__NR_setpriority, sys_setpriority)
-__SYSCALL(98, sys_ni_syscall)		/* 98 was sys_profil */
-#define __NR_statfs			99
-__SYSCALL(__NR_statfs, sys_statfs)
-#define __NR_fstatfs			100
-__SYSCALL(__NR_fstatfs, sys_fstatfs)
-__SYSCALL(101, sys_ni_syscall)		/* 101 was sys_ioperm */
-__SYSCALL(102, sys_ni_syscall)		/* 102 was sys_socketcall */
-#define __NR_syslog			103
-__SYSCALL(__NR_syslog, sys_syslog)
-#define __NR_setitimer			104
-__SYSCALL(__NR_setitimer, sys_setitimer)
-#define __NR_getitimer			105
-__SYSCALL(__NR_getitimer, sys_getitimer)
-#define __NR_stat			106
-__SYSCALL(__NR_stat, sys_newstat)
-#define __NR_lstat			107
-__SYSCALL(__NR_lstat, sys_newlstat)
-#define __NR_fstat			108
-__SYSCALL(__NR_fstat, sys_newfstat)
-__SYSCALL(109, sys_ni_syscall)		/* 109 was sys_uname */
-__SYSCALL(110, sys_ni_syscall)		/* 110 was sys_iopl */
-#define __NR_vhangup			111
-__SYSCALL(__NR_vhangup, sys_vhangup)
-__SYSCALL(112, sys_ni_syscall)		/* 112 was sys_idle */
-__SYSCALL(113, sys_ni_syscall)		/* 113 was sys_syscall */
-#define __NR_wait4			114
-__SYSCALL(__NR_wait4, sys_wait4)
-#define __NR_swapoff			115
-__SYSCALL(__NR_swapoff, sys_swapoff)
-#define __NR_sysinfo			116
-__SYSCALL(__NR_sysinfo, sys_sysinfo)
-__SYSCALL(117, sys_ni_syscall)		/* 117 was sys_ipc */
-#define __NR_fsync			118
-__SYSCALL(__NR_fsync, sys_fsync)
-#define __NR_sigreturn			119
-__SYSCALL(__NR_sigreturn, sys_sigreturn)
-#define __NR_clone			120
-__SYSCALL(__NR_clone, sys_clone)
-#define __NR_setdomainname		121
-__SYSCALL(__NR_setdomainname, sys_setdomainname)
-#define __NR_uname			122
-__SYSCALL(__NR_uname, sys_newuname)
-__SYSCALL(123, sys_ni_syscall)		/* 123 was sys_modify_ldt */
-#define __NR_adjtimex			124
-__SYSCALL(__NR_adjtimex, sys_adjtimex)
-#define __NR_mprotect			125
-__SYSCALL(__NR_mprotect, sys_mprotect)
-#define __NR_sigprocmask		126
-__SYSCALL(__NR_sigprocmask, sys_sigprocmask)
-__SYSCALL(127, sys_ni_syscall)		/* 127 was sys_create_module */
-#define __NR_init_module		128
-__SYSCALL(__NR_init_module, sys_init_module)
-#define __NR_delete_module		129
-__SYSCALL(__NR_delete_module, sys_delete_module)
-__SYSCALL(130, sys_ni_syscall)		/* 130 was sys_get_kernel_syms */
-#define __NR_quotactl			131
-__SYSCALL(__NR_quotactl, sys_quotactl)
-#define __NR_getpgid			132
-__SYSCALL(__NR_getpgid, sys_getpgid)
-#define __NR_fchdir			133
-__SYSCALL(__NR_fchdir, sys_fchdir)
-#define __NR_bdflush			134
-__SYSCALL(__NR_bdflush, sys_bdflush)
-#define __NR_sysfs			135
-__SYSCALL(__NR_sysfs, sys_sysfs)
-#define __NR_personality		136
-__SYSCALL(__NR_personality, sys_personality)
-__SYSCALL(137, sys_ni_syscall)		/* 137 was sys_afs_syscall */
-#define __NR_setfsuid			138
-__SYSCALL(__NR_setfsuid, sys_setfsuid16)
-#define __NR_setfsgid			139
-__SYSCALL(__NR_setfsgid, sys_setfsgid16)
-#define __NR__llseek			140
-__SYSCALL(__NR__llseek, sys_llseek)
-#define __NR_getdents			141
-__SYSCALL(__NR_getdents, sys_getdents)
-#define __NR__newselect			142
-__SYSCALL(__NR__newselect, sys_select)
-#define __NR_flock			143
-__SYSCALL(__NR_flock, sys_flock)
-#define __NR_msync			144
-__SYSCALL(__NR_msync, sys_msync)
-#define __NR_readv			145
-__SYSCALL(__NR_readv, sys_readv)
-#define __NR_writev			146
-__SYSCALL(__NR_writev, sys_writev)
-#define __NR_getsid			147
-__SYSCALL(__NR_getsid, sys_getsid)
-#define __NR_fdatasync			148
-__SYSCALL(__NR_fdatasync, sys_fdatasync)
-#define __NR__sysctl			149
-__SYSCALL(__NR__sysctl, sys_sysctl)
-#define __NR_mlock			150
-__SYSCALL(__NR_mlock, sys_mlock)
-#define __NR_munlock			151
-__SYSCALL(__NR_munlock, sys_munlock)
-#define __NR_mlockall			152
-__SYSCALL(__NR_mlockall, sys_mlockall)
-#define __NR_munlockall			153
-__SYSCALL(__NR_munlockall, sys_munlockall)
-#define __NR_sched_setparam		154
-__SYSCALL(__NR_sched_setparam, sys_sched_setparam)
-#define __NR_sched_getparam		155
-__SYSCALL(__NR_sched_getparam, sys_sched_getparam)
-#define __NR_sched_setscheduler		156
-__SYSCALL(__NR_sched_setscheduler, sys_sched_setscheduler)
-#define __NR_sched_getscheduler		157
-__SYSCALL(__NR_sched_getscheduler, sys_sched_getscheduler)
-#define __NR_sched_yield		158
-__SYSCALL(__NR_sched_yield, sys_sched_yield)
-#define __NR_sched_get_priority_max	159
-__SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max)
-#define __NR_sched_get_priority_min	160
-__SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min)
-#define __NR_sched_rr_get_interval	161
-__SYSCALL(__NR_sched_rr_get_interval, sys_sched_rr_get_interval)
-#define __NR_nanosleep			162
-__SYSCALL(__NR_nanosleep, sys_nanosleep)
-#define __NR_mremap			163
-__SYSCALL(__NR_mremap, sys_mremap)
-#define __NR_setresuid			164
-__SYSCALL(__NR_setresuid, sys_setresuid16)
-#define __NR_getresuid			165
-__SYSCALL(__NR_getresuid, sys_getresuid16)
-__SYSCALL(166, sys_ni_syscall)		/* 166 was sys_vm86 */
-__SYSCALL(167, sys_ni_syscall)		/* 167 was sys_query_module */
-#define __NR_poll			168
-__SYSCALL(__NR_poll, sys_poll)
-#define __NR_nfsservctl			169
-__SYSCALL(__NR_nfsservctl, sys_ni_syscall)
-#define __NR_setresgid			170
-__SYSCALL(__NR_setresgid, sys_setresgid16)
-#define __NR_getresgid			171
-__SYSCALL(__NR_getresgid, sys_getresgid16)
-#define __NR_prctl			172
-__SYSCALL(__NR_prctl, sys_prctl)
-#define __NR_rt_sigreturn		173
-__SYSCALL(__NR_rt_sigreturn, sys_rt_sigreturn)
-#define __NR_rt_sigaction		174
-__SYSCALL(__NR_rt_sigaction, sys_rt_sigaction)
-#define __NR_rt_sigprocmask		175
-__SYSCALL(__NR_rt_sigprocmask, sys_rt_sigprocmask)
-#define __NR_rt_sigpending		176
-__SYSCALL(__NR_rt_sigpending, sys_rt_sigpending)
-#define __NR_rt_sigtimedwait		177
-__SYSCALL(__NR_rt_sigtimedwait, sys_rt_sigtimedwait)
-#define __NR_rt_sigqueueinfo		178
-__SYSCALL(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo)
-#define __NR_rt_sigsuspend		179
-__SYSCALL(__NR_rt_sigsuspend, sys_rt_sigsuspend)
-#define __NR_pread64			180
-__SYSCALL(__NR_pread64, sys_pread64)
-#define __NR_pwrite64			181
-__SYSCALL(__NR_pwrite64, sys_pwrite64)
-#define __NR_chown			182
-__SYSCALL(__NR_chown, sys_chown16)
-#define __NR_getcwd			183
-__SYSCALL(__NR_getcwd, sys_getcwd)
-#define __NR_capget			184
-__SYSCALL(__NR_capget, sys_capget)
-#define __NR_capset			185
-__SYSCALL(__NR_capset, sys_capset)
-#define __NR_sigaltstack		186
-__SYSCALL(__NR_sigaltstack, sys_sigaltstack)
-#define __NR_sendfile			187
-__SYSCALL(__NR_sendfile, sys_sendfile)
-__SYSCALL(188, sys_ni_syscall)		/* 188 reserved */
-__SYSCALL(189, sys_ni_syscall)		/* 189 reserved */
-#define __NR_vfork			190
-__SYSCALL(__NR_vfork, sys_vfork)
-#define __NR_ugetrlimit			191	/* SuS compliant getrlimit */
-__SYSCALL(__NR_ugetrlimit, sys_getrlimit)
-#define __NR_mmap2			192
-__SYSCALL(__NR_mmap2, sys_mmap2)
-#define __NR_truncate64			193
-__SYSCALL(__NR_truncate64, sys_truncate64)
-#define __NR_ftruncate64		194
-__SYSCALL(__NR_ftruncate64, sys_ftruncate64)
-#define __NR_stat64			195
-__SYSCALL(__NR_stat64, sys_stat64)
-#define __NR_lstat64			196
-__SYSCALL(__NR_lstat64, sys_lstat64)
-#define __NR_fstat64			197
-__SYSCALL(__NR_fstat64, sys_fstat64)
-#define __NR_lchown32			198
-__SYSCALL(__NR_lchown32, sys_lchown)
-#define __NR_getuid32			199
-__SYSCALL(__NR_getuid32, sys_getuid)
-#define __NR_getgid32			200
-__SYSCALL(__NR_getgid32, sys_getgid)
-#define __NR_geteuid32			201
-__SYSCALL(__NR_geteuid32, sys_geteuid)
-#define __NR_getegid32			202
-__SYSCALL(__NR_getegid32, sys_getegid)
-#define __NR_setreuid32			203
-__SYSCALL(__NR_setreuid32, sys_setreuid)
-#define __NR_setregid32			204
-__SYSCALL(__NR_setregid32, sys_setregid)
-#define __NR_getgroups32		205
-__SYSCALL(__NR_getgroups32, sys_getgroups)
-#define __NR_setgroups32		206
-__SYSCALL(__NR_setgroups32, sys_setgroups)
-#define __NR_fchown32			207
-__SYSCALL(__NR_fchown32, sys_fchown)
-#define __NR_setresuid32		208
-__SYSCALL(__NR_setresuid32, sys_setresuid)
-#define __NR_getresuid32		209
-__SYSCALL(__NR_getresuid32, sys_getresuid)
-#define __NR_setresgid32		210
-__SYSCALL(__NR_setresgid32, sys_setresgid)
-#define __NR_getresgid32		211
-__SYSCALL(__NR_getresgid32, sys_getresgid)
-#define __NR_chown32			212
-__SYSCALL(__NR_chown32, sys_chown)
-#define __NR_setuid32			213
-__SYSCALL(__NR_setuid32, sys_setuid)
-#define __NR_setgid32			214
-__SYSCALL(__NR_setgid32, sys_setgid)
-#define __NR_setfsuid32			215
-__SYSCALL(__NR_setfsuid32, sys_setfsuid)
-#define __NR_setfsgid32			216
-__SYSCALL(__NR_setfsgid32, sys_setfsgid)
-#define __NR_getdents64			217
-__SYSCALL(__NR_getdents64, sys_getdents64)
-#define __NR_pivot_root			218
-__SYSCALL(__NR_pivot_root, sys_pivot_root)
-#define __NR_mincore			219
-__SYSCALL(__NR_mincore, sys_mincore)
-#define __NR_madvise			220
-__SYSCALL(__NR_madvise, sys_madvise)
-#define __NR_fcntl64			221
-__SYSCALL(__NR_fcntl64, sys_fcntl64)
-__SYSCALL(222, sys_ni_syscall)		/* 222 for tux */
-__SYSCALL(223, sys_ni_syscall)		/* 223 is unused */
-#define __NR_gettid			224
-__SYSCALL(__NR_gettid, sys_gettid)
-#define __NR_readahead			225
-__SYSCALL(__NR_readahead, sys_readahead)
-#define __NR_setxattr			226
-__SYSCALL(__NR_setxattr, sys_setxattr)
-#define __NR_lsetxattr			227
-__SYSCALL(__NR_lsetxattr, sys_lsetxattr)
-#define __NR_fsetxattr			228
-__SYSCALL(__NR_fsetxattr, sys_fsetxattr)
-#define __NR_getxattr			229
-__SYSCALL(__NR_getxattr, sys_getxattr)
-#define __NR_lgetxattr			230
-__SYSCALL(__NR_lgetxattr, sys_lgetxattr)
-#define __NR_fgetxattr			231
-__SYSCALL(__NR_fgetxattr, sys_fgetxattr)
-#define __NR_listxattr			232
-__SYSCALL(__NR_listxattr, sys_listxattr)
-#define __NR_llistxattr			233
-__SYSCALL(__NR_llistxattr, sys_llistxattr)
-#define __NR_flistxattr			234
-__SYSCALL(__NR_flistxattr, sys_flistxattr)
-#define __NR_removexattr		235
-__SYSCALL(__NR_removexattr, sys_removexattr)
-#define __NR_lremovexattr		236
-__SYSCALL(__NR_lremovexattr, sys_lremovexattr)
-#define __NR_fremovexattr		237
-__SYSCALL(__NR_fremovexattr, sys_fremovexattr)
-#define __NR_tkill			238
-__SYSCALL(__NR_tkill, sys_tkill)
-#define __NR_sendfile64			239
-__SYSCALL(__NR_sendfile64, sys_sendfile64)
-#define __NR_futex			240
-__SYSCALL(__NR_futex, sys_futex)
-#define __NR_sched_setaffinity		241
-__SYSCALL(__NR_sched_setaffinity, sys_sched_setaffinity)
-#define __NR_sched_getaffinity		242
-__SYSCALL(__NR_sched_getaffinity, sys_sched_getaffinity)
-#define __NR_io_setup			243
-__SYSCALL(__NR_io_setup, sys_io_setup)
-#define __NR_io_destroy			244
-__SYSCALL(__NR_io_destroy, sys_io_destroy)
-#define __NR_io_getevents		245
-__SYSCALL(__NR_io_getevents, sys_io_getevents)
-#define __NR_io_submit			246
-__SYSCALL(__NR_io_submit, sys_io_submit)
-#define __NR_io_cancel			247
-__SYSCALL(__NR_io_cancel, sys_io_cancel)
-#define __NR_exit_group			248
-__SYSCALL(__NR_exit_group, sys_exit_group)
-#define __NR_lookup_dcookie		249
-__SYSCALL(__NR_lookup_dcookie, sys_lookup_dcookie)
-#define __NR_epoll_create		250
-__SYSCALL(__NR_epoll_create, sys_epoll_create)
-#define __NR_epoll_ctl			251
-__SYSCALL(__NR_epoll_ctl, sys_epoll_ctl)
-#define __NR_epoll_wait			252
-__SYSCALL(__NR_epoll_wait, sys_epoll_wait)
-#define __NR_remap_file_pages		253
-__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
-__SYSCALL(254, sys_ni_syscall)		/* 254 for set_thread_area */
-__SYSCALL(255, sys_ni_syscall)		/* 255 for get_thread_area */
-#define __NR_set_tid_address		256
-__SYSCALL(__NR_set_tid_address, sys_set_tid_address)
-#define __NR_timer_create		257
-__SYSCALL(__NR_timer_create, sys_timer_create)
-#define __NR_timer_settime		258
-__SYSCALL(__NR_timer_settime, sys_timer_settime)
-#define __NR_timer_gettime		259
-__SYSCALL(__NR_timer_gettime, sys_timer_gettime)
-#define __NR_timer_getoverrun		260
-__SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun)
-#define __NR_timer_delete		261
-__SYSCALL(__NR_timer_delete, sys_timer_delete)
-#define __NR_clock_settime		262
-__SYSCALL(__NR_clock_settime, sys_clock_settime)
-#define __NR_clock_gettime		263
-__SYSCALL(__NR_clock_gettime, sys_clock_gettime)
-#define __NR_clock_getres		264
-__SYSCALL(__NR_clock_getres, sys_clock_getres)
-#define __NR_clock_nanosleep		265
-__SYSCALL(__NR_clock_nanosleep, sys_clock_nanosleep)
-#define __NR_statfs64			266
-__SYSCALL(__NR_statfs64, sys_statfs64)
-#define __NR_fstatfs64			267
-__SYSCALL(__NR_fstatfs64, sys_fstatfs64)
-#define __NR_tgkill			268
-__SYSCALL(__NR_tgkill, sys_tgkill)
-#define __NR_utimes			269
-__SYSCALL(__NR_utimes, sys_utimes)
-#define __NR_fadvise64			270
-__SYSCALL(__NR_fadvise64, sys_fadvise64_64)
-#define __NR_pciconfig_iobase		271
-__SYSCALL(__NR_pciconfig_iobase, sys_pciconfig_iobase)
-#define __NR_pciconfig_read		272
-__SYSCALL(__NR_pciconfig_read, sys_pciconfig_read)
-#define __NR_pciconfig_write		273
-__SYSCALL(__NR_pciconfig_write, sys_pciconfig_write)
-#define __NR_mq_open			274
-__SYSCALL(__NR_mq_open, sys_mq_open)
-#define __NR_mq_unlink			275
-__SYSCALL(__NR_mq_unlink, sys_mq_unlink)
-#define __NR_mq_timedsend		276
-__SYSCALL(__NR_mq_timedsend, sys_mq_timedsend)
-#define __NR_mq_timedreceive		277
-__SYSCALL(__NR_mq_timedreceive, sys_mq_timedreceive)
-#define __NR_mq_notify			278
-__SYSCALL(__NR_mq_notify, sys_mq_notify)
-#define __NR_mq_getsetattr		279
-__SYSCALL(__NR_mq_getsetattr, sys_mq_getsetattr)
-#define __NR_waitid			280
-__SYSCALL(__NR_waitid, sys_waitid)
-#define __NR_socket			281
-__SYSCALL(__NR_socket, sys_socket)
-#define __NR_bind			282
-__SYSCALL(__NR_bind, sys_bind)
-#define __NR_connect			283
-__SYSCALL(__NR_connect, sys_connect)
-#define __NR_listen			284
-__SYSCALL(__NR_listen, sys_listen)
-#define __NR_accept			285
-__SYSCALL(__NR_accept, sys_accept)
-#define __NR_getsockname		286
-__SYSCALL(__NR_getsockname, sys_getsockname)
-#define __NR_getpeername		287
-__SYSCALL(__NR_getpeername, sys_getpeername)
-#define __NR_socketpair			288
-__SYSCALL(__NR_socketpair, sys_socketpair)
-#define __NR_send			289
-__SYSCALL(__NR_send, sys_send)
-#define __NR_sendto			290
-__SYSCALL(__NR_sendto, sys_sendto)
-#define __NR_recv			291
-__SYSCALL(__NR_recv, sys_recv)
-#define __NR_recvfrom			292
-__SYSCALL(__NR_recvfrom, sys_recvfrom)
-#define __NR_shutdown			293
-__SYSCALL(__NR_shutdown, sys_shutdown)
-#define __NR_setsockopt			294
-__SYSCALL(__NR_setsockopt, sys_setsockopt)
-#define __NR_getsockopt			295
-__SYSCALL(__NR_getsockopt, sys_getsockopt)
-#define __NR_sendmsg			296
-__SYSCALL(__NR_sendmsg, sys_sendmsg)
-#define __NR_recvmsg			297
-__SYSCALL(__NR_recvmsg, sys_recvmsg)
-#define __NR_semop			298
-__SYSCALL(__NR_semop, sys_semop)
-#define __NR_semget			299
-__SYSCALL(__NR_semget, sys_semget)
-#define __NR_semctl			300
-__SYSCALL(__NR_semctl, sys_semctl)
-#define __NR_msgsnd			301
-__SYSCALL(__NR_msgsnd, sys_msgsnd)
-#define __NR_msgrcv			302
-__SYSCALL(__NR_msgrcv, sys_msgrcv)
-#define __NR_msgget			303
-__SYSCALL(__NR_msgget, sys_msgget)
-#define __NR_msgctl			304
-__SYSCALL(__NR_msgctl, sys_msgctl)
-#define __NR_shmat			305
-__SYSCALL(__NR_shmat, sys_shmat)
-#define __NR_shmdt			306
-__SYSCALL(__NR_shmdt, sys_shmdt)
-#define __NR_shmget			307
-__SYSCALL(__NR_shmget, sys_shmget)
-#define __NR_shmctl			308
-__SYSCALL(__NR_shmctl, sys_shmctl)
-#define __NR_add_key			309
-__SYSCALL(__NR_add_key, sys_add_key)
-#define __NR_request_key		310
-__SYSCALL(__NR_request_key, sys_request_key)
-#define __NR_keyctl			311
-__SYSCALL(__NR_keyctl, sys_keyctl)
-#define __NR_semtimedop			312
-__SYSCALL(__NR_semtimedop, sys_semtimedop)
-#define __NR_vserver			313
-__SYSCALL(__NR_vserver, sys_ni_syscall)
-#define __NR_ioprio_set			314
-__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
-#define __NR_ioprio_get			315
-__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
-#define __NR_inotify_init		316
-__SYSCALL(__NR_inotify_init, sys_inotify_init)
-#define __NR_inotify_add_watch		317
-__SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch)
-#define __NR_inotify_rm_watch		318
-__SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch)
-#define __NR_mbind			319
-__SYSCALL(__NR_mbind, sys_mbind)
-#define __NR_get_mempolicy		320
-__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
-#define __NR_set_mempolicy		321
-__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
-#define __NR_openat			322
-__SYSCALL(__NR_openat, sys_openat)
-#define __NR_mkdirat			323
-__SYSCALL(__NR_mkdirat, sys_mkdirat)
-#define __NR_mknodat			324
-__SYSCALL(__NR_mknodat, sys_mknodat)
-#define __NR_fchownat			325
-__SYSCALL(__NR_fchownat, sys_fchownat)
-#define __NR_futimesat			326
-__SYSCALL(__NR_futimesat, sys_futimesat)
-#define __NR_fstatat64			327
-__SYSCALL(__NR_fstatat64, sys_fstatat64)
-#define __NR_unlinkat			328
-__SYSCALL(__NR_unlinkat, sys_unlinkat)
-#define __NR_renameat			329
-__SYSCALL(__NR_renameat, sys_renameat)
-#define __NR_linkat			330
-__SYSCALL(__NR_linkat, sys_linkat)
-#define __NR_symlinkat			331
-__SYSCALL(__NR_symlinkat, sys_symlinkat)
-#define __NR_readlinkat			332
-__SYSCALL(__NR_readlinkat, sys_readlinkat)
-#define __NR_fchmodat			333
-__SYSCALL(__NR_fchmodat, sys_fchmodat)
-#define __NR_faccessat			334
-__SYSCALL(__NR_faccessat, sys_faccessat)
-#define __NR_pselect6			335
-__SYSCALL(__NR_pselect6, sys_pselect6)
-#define __NR_ppoll			336
-__SYSCALL(__NR_ppoll, sys_ppoll)
-#define __NR_unshare			337
-__SYSCALL(__NR_unshare, sys_unshare)
-#define __NR_set_robust_list		338
-__SYSCALL(__NR_set_robust_list, sys_set_robust_list)
-#define __NR_get_robust_list		339
-__SYSCALL(__NR_get_robust_list, sys_get_robust_list)
-#define __NR_splice			340
-__SYSCALL(__NR_splice, sys_splice)
-#define __NR_sync_file_range2		341
-__SYSCALL(__NR_sync_file_range2, sys_sync_file_range2)
-#define __NR_tee			342
-__SYSCALL(__NR_tee, sys_tee)
-#define __NR_vmsplice			343
-__SYSCALL(__NR_vmsplice, sys_vmsplice)
-#define __NR_move_pages			344
-__SYSCALL(__NR_move_pages, sys_move_pages)
-#define __NR_getcpu			345
-__SYSCALL(__NR_getcpu, sys_getcpu)
-#define __NR_epoll_pwait		346
-__SYSCALL(__NR_epoll_pwait, sys_epoll_pwait)
-#define __NR_kexec_load			347
-__SYSCALL(__NR_kexec_load, sys_kexec_load)
-#define __NR_utimensat			348
-__SYSCALL(__NR_utimensat, sys_utimensat)
-#define __NR_signalfd			349
-__SYSCALL(__NR_signalfd, sys_signalfd)
-#define __NR_timerfd_create		350
-__SYSCALL(__NR_timerfd_create, sys_timerfd_create)
-#define __NR_eventfd			351
-__SYSCALL(__NR_eventfd, sys_eventfd)
-#define __NR_fallocate			352
-__SYSCALL(__NR_fallocate, sys_fallocate)
-#define __NR_timerfd_settime		353
-__SYSCALL(__NR_timerfd_settime, sys_timerfd_settime)
-#define __NR_timerfd_gettime		354
-__SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
-#define __NR_signalfd4			355
-__SYSCALL(__NR_signalfd4, sys_signalfd4)
-#define __NR_eventfd2			356
-__SYSCALL(__NR_eventfd2, sys_eventfd2)
-#define __NR_epoll_create1		357
-__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
-#define __NR_dup3			358
-__SYSCALL(__NR_dup3, sys_dup3)
-#define __NR_pipe2			359
-__SYSCALL(__NR_pipe2, sys_pipe2)
-#define __NR_inotify_init1		360
-__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
-#define __NR_preadv			361
-__SYSCALL(__NR_preadv, sys_preadv)
-#define __NR_pwritev			362
-__SYSCALL(__NR_pwritev, sys_pwritev)
-#define __NR_rt_tgsigqueueinfo		363
-__SYSCALL(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo)
-#define __NR_perf_event_open		364
-__SYSCALL(__NR_perf_event_open, sys_perf_event_open)
-#define __NR_recvmmsg			365
-__SYSCALL(__NR_recvmmsg, sys_recvmmsg)
-#define __NR_accept4			366
-__SYSCALL(__NR_accept4, sys_accept4)
-#define __NR_fanotify_init		367
-__SYSCALL(__NR_fanotify_init, sys_fanotify_init)
-#define __NR_fanotify_mark		368
-__SYSCALL(__NR_fanotify_mark, sys_fanotify_mark)
-#define __NR_prlimit64			369
-__SYSCALL(__NR_prlimit64, sys_prlimit64)
-#define __NR_name_to_handle_at		370
-__SYSCALL(__NR_name_to_handle_at, sys_name_to_handle_at)
-#define __NR_open_by_handle_at		371
-__SYSCALL(__NR_open_by_handle_at, sys_open_by_handle_at)
-#define __NR_clock_adjtime		372
-__SYSCALL(__NR_clock_adjtime, sys_clock_adjtime)
-#define __NR_syncfs			373
-__SYSCALL(__NR_syncfs, sys_syncfs)
 
 /*
  * The following SVCs are ARM private.
@@ -737,19 +412,3 @@
 #define __ARM_NR_COMPAT_BASE		0x0f0000
 #define __ARM_NR_compat_cacheflush	(__ARM_NR_COMPAT_BASE+2)
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE+5)
-
-#endif	/* __SYSCALL_COMPAT */
-
-#define __NR_compat_syscalls		374
-
-#define __ARCH_WANT_COMPAT_IPC_PARSE_VERSION
-#define __ARCH_WANT_COMPAT_STAT64
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
-#define __ARCH_WANT_COMPAT_SYS_SENDFILE
diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild
index baebb3d..ca5b65f 100644
--- a/arch/arm64/include/uapi/asm/Kbuild
+++ b/arch/arm64/include/uapi/asm/Kbuild
@@ -1,3 +1,17 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += byteorder.h
+header-y += fcntl.h
+header-y += hwcap.h
+header-y += param.h
+header-y += ptrace.h
+header-y += setup.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += stat.h
+header-y += statfs.h
+header-y += unistd.h
diff --git a/arch/arm64/include/asm/auxvec.h b/arch/arm64/include/uapi/asm/auxvec.h
similarity index 100%
rename from arch/arm64/include/asm/auxvec.h
rename to arch/arm64/include/uapi/asm/auxvec.h
diff --git a/arch/arm64/include/asm/bitsperlong.h b/arch/arm64/include/uapi/asm/bitsperlong.h
similarity index 100%
rename from arch/arm64/include/asm/bitsperlong.h
rename to arch/arm64/include/uapi/asm/bitsperlong.h
diff --git a/arch/arm64/include/asm/byteorder.h b/arch/arm64/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/arm64/include/asm/byteorder.h
rename to arch/arm64/include/uapi/asm/byteorder.h
diff --git a/arch/arm64/include/asm/fcntl.h b/arch/arm64/include/uapi/asm/fcntl.h
similarity index 100%
rename from arch/arm64/include/asm/fcntl.h
rename to arch/arm64/include/uapi/asm/fcntl.h
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
new file mode 100644
index 0000000..eea4975
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _UAPI__ASM_HWCAP_H
+#define _UAPI__ASM_HWCAP_H
+
+/*
+ * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
+ */
+#define HWCAP_FP		(1 << 0)
+#define HWCAP_ASIMD		(1 << 1)
+
+
+#endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/include/asm/param.h b/arch/arm64/include/uapi/asm/param.h
similarity index 100%
rename from arch/arm64/include/asm/param.h
rename to arch/arm64/include/uapi/asm/param.h
diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..9b131b4
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/ptrace.h
@@ -0,0 +1,91 @@
+/*
+ * Based on arch/arm/include/asm/ptrace.h
+ *
+ * Copyright (C) 1996-2003 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _UAPI__ASM_PTRACE_H
+#define _UAPI__ASM_PTRACE_H
+
+#include <linux/types.h>
+
+#include <asm/hwcap.h>
+
+
+/*
+ * PSR bits
+ */
+#define PSR_MODE_EL0t	0x00000000
+#define PSR_MODE_EL1t	0x00000004
+#define PSR_MODE_EL1h	0x00000005
+#define PSR_MODE_EL2t	0x00000008
+#define PSR_MODE_EL2h	0x00000009
+#define PSR_MODE_EL3t	0x0000000c
+#define PSR_MODE_EL3h	0x0000000d
+#define PSR_MODE_MASK	0x0000000f
+
+/* AArch32 CPSR bits */
+#define PSR_MODE32_BIT		0x00000010
+
+/* AArch64 SPSR bits */
+#define PSR_F_BIT	0x00000040
+#define PSR_I_BIT	0x00000080
+#define PSR_A_BIT	0x00000100
+#define PSR_D_BIT	0x00000200
+#define PSR_Q_BIT	0x08000000
+#define PSR_V_BIT	0x10000000
+#define PSR_C_BIT	0x20000000
+#define PSR_Z_BIT	0x40000000
+#define PSR_N_BIT	0x80000000
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f		0xff000000	/* Flags		*/
+#define PSR_s		0x00ff0000	/* Status		*/
+#define PSR_x		0x0000ff00	/* Extension		*/
+#define PSR_c		0x000000ff	/* Control		*/
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * User structures for general purpose, floating point and debug registers.
+ */
+struct user_pt_regs {
+	__u64		regs[31];
+	__u64		sp;
+	__u64		pc;
+	__u64		pstate;
+};
+
+struct user_fpsimd_state {
+	__uint128_t	vregs[32];
+	__u32		fpsr;
+	__u32		fpcr;
+};
+
+struct user_hwdebug_state {
+	__u32		dbg_info;
+	struct {
+		__u64	addr;
+		__u32	ctrl;
+	}		dbg_regs[16];
+};
+
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _UAPI__ASM_PTRACE_H */
diff --git a/arch/arm64/include/asm/setup.h b/arch/arm64/include/uapi/asm/setup.h
similarity index 100%
rename from arch/arm64/include/asm/setup.h
rename to arch/arm64/include/uapi/asm/setup.h
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
new file mode 100644
index 0000000..690ad51
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _UAPI__ASM_SIGCONTEXT_H
+#define _UAPI__ASM_SIGCONTEXT_H
+
+#include <linux/types.h>
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.
+ */
+struct sigcontext {
+	__u64 fault_address;
+	/* AArch64 registers */
+	__u64 regs[31];
+	__u64 sp;
+	__u64 pc;
+	__u64 pstate;
+	/* 4K reserved for FP/SIMD state and future expansion */
+	__u8 __reserved[4096] __attribute__((__aligned__(16)));
+};
+
+/*
+ * Header to be used at the beginning of structures extending the user
+ * context. Such structures must be placed after the rt_sigframe on the stack
+ * and be 16-byte aligned. The last structure must be a dummy one with the
+ * magic and size set to 0.
+ */
+struct _aarch64_ctx {
+	__u32 magic;
+	__u32 size;
+};
+
+#define FPSIMD_MAGIC	0x46508001
+
+struct fpsimd_context {
+	struct _aarch64_ctx head;
+	__u32 fpsr;
+	__u32 fpcr;
+	__uint128_t vregs[32];
+};
+
+
+#endif /* _UAPI__ASM_SIGCONTEXT_H */
diff --git a/arch/arm64/include/asm/siginfo.h b/arch/arm64/include/uapi/asm/siginfo.h
similarity index 100%
rename from arch/arm64/include/asm/siginfo.h
rename to arch/arm64/include/uapi/asm/siginfo.h
diff --git a/arch/arm64/include/asm/signal.h b/arch/arm64/include/uapi/asm/signal.h
similarity index 100%
rename from arch/arm64/include/asm/signal.h
rename to arch/arm64/include/uapi/asm/signal.h
diff --git a/arch/arm64/include/uapi/asm/stat.h b/arch/arm64/include/uapi/asm/stat.h
new file mode 100644
index 0000000..eeb702e
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/stat.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <asm-generic/stat.h>
diff --git a/arch/arm64/include/asm/statfs.h b/arch/arm64/include/uapi/asm/statfs.h
similarity index 100%
rename from arch/arm64/include/asm/statfs.h
rename to arch/arm64/include/uapi/asm/statfs.h
diff --git a/arch/arm64/include/uapi/asm/unistd.h b/arch/arm64/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..1caadc2
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/unistd.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <asm-generic/unistd.h>
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 6538928..a6f3f7d 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -26,6 +26,7 @@
 #include <asm/errno.h>
 #include <asm/thread_info.h>
 #include <asm/unistd.h>
+#include <asm/unistd32.h>
 
 /*
  * Bad Abort numbers
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index ac3550e..2ea3968 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -823,11 +823,11 @@
 	if (off & 3)
 		return -EIO;
 
-	if (off == PT_TEXT_ADDR)
+	if (off == COMPAT_PT_TEXT_ADDR)
 		tmp = tsk->mm->start_code;
-	else if (off == PT_DATA_ADDR)
+	else if (off == COMPAT_PT_DATA_ADDR)
 		tmp = tsk->mm->start_data;
-	else if (off == PT_TEXT_END_ADDR)
+	else if (off == COMPAT_PT_TEXT_END_ADDR)
 		tmp = tsk->mm->end_code;
 	else if (off < sizeof(compat_elf_gregset_t))
 		return copy_regset_to_user(tsk, &user_aarch32_view,
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index 0790a87..4654824 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -18,8 +18,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#define __SYSCALL_COMPAT
-
 #include <linux/compat.h>
 #include <linux/signal.h>
 #include <linux/syscalls.h>
@@ -28,7 +26,7 @@
 #include <asm/fpsimd.h>
 #include <asm/signal32.h>
 #include <asm/uaccess.h>
-#include <asm/unistd.h>
+#include <asm/unistd32.h>
 
 struct compat_sigaction {
 	compat_uptr_t			sa_handler;
@@ -126,19 +124,19 @@
  * For ARM syscalls, the syscall number has to be loaded into r7.
  * We do not support an OABI userspace.
  */
-#define MOV_R7_NR_SIGRETURN	(0xe3a07000 | __NR_sigreturn)
-#define SVC_SYS_SIGRETURN	(0xef000000 | __NR_sigreturn)
-#define MOV_R7_NR_RT_SIGRETURN	(0xe3a07000 | __NR_rt_sigreturn)
-#define SVC_SYS_RT_SIGRETURN	(0xef000000 | __NR_rt_sigreturn)
+#define MOV_R7_NR_SIGRETURN	(0xe3a07000 | __NR_compat_sigreturn)
+#define SVC_SYS_SIGRETURN	(0xef000000 | __NR_compat_sigreturn)
+#define MOV_R7_NR_RT_SIGRETURN	(0xe3a07000 | __NR_compat_rt_sigreturn)
+#define SVC_SYS_RT_SIGRETURN	(0xef000000 | __NR_compat_rt_sigreturn)
 
 /*
  * For Thumb syscalls, we also pass the syscall number via r7. We therefore
  * need two 16-bit instructions.
  */
-#define SVC_THUMB_SIGRETURN	(((0xdf00 | __NR_sigreturn) << 16) | \
-				   0x2700 | __NR_sigreturn)
-#define SVC_THUMB_RT_SIGRETURN	(((0xdf00 | __NR_rt_sigreturn) << 16) | \
-				   0x2700 | __NR_rt_sigreturn)
+#define SVC_THUMB_SIGRETURN	(((0xdf00 | __NR_compat_sigreturn) << 16) | \
+				   0x2700 | __NR_compat_sigreturn)
+#define SVC_THUMB_RT_SIGRETURN	(((0xdf00 | __NR_compat_rt_sigreturn) << 16) | \
+				   0x2700 | __NR_compat_rt_sigreturn)
 
 const compat_ulong_t aarch32_sigret_code[6] = {
 	/*
@@ -819,5 +817,5 @@
 
 void compat_setup_restart_syscall(struct pt_regs *regs)
 {
-       regs->regs[7] = __NR_restart_syscall;
+       regs->regs[7] = __NR_compat_restart_syscall;
 }
diff --git a/arch/arm64/kernel/sys.c b/arch/arm64/kernel/sys.c
index 905fcfb..b120df3 100644
--- a/arch/arm64/kernel/sys.c
+++ b/arch/arm64/kernel/sys.c
@@ -50,13 +50,13 @@
 			   struct pt_regs *regs)
 {
 	long error;
-	char * filename;
+	struct filename *filename;
 
 	filename = getname(filenamei);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = do_execve(filename, argv, envp, regs);
+	error = do_execve(filename->name, argv, envp, regs);
 	putname(filename);
 out:
 	return error;
diff --git a/arch/arm64/kernel/sys32.S b/arch/arm64/kernel/sys32.S
index 5e4dc93..54c4aec 100644
--- a/arch/arm64/kernel/sys32.S
+++ b/arch/arm64/kernel/sys32.S
@@ -147,136 +147,12 @@
 	b	sys_fanotify_mark
 ENDPROC(compat_sys_fanotify_mark_wrapper)
 
-/*
- * Use the compat system call wrappers.
- */
-#define sys_fork		compat_sys_fork_wrapper
-#define sys_open		compat_sys_open
-#define sys_execve		compat_sys_execve_wrapper
-#define sys_lseek		compat_sys_lseek_wrapper
-#define sys_mount		compat_sys_mount
-#define sys_ptrace		compat_sys_ptrace
-#define sys_times		compat_sys_times
-#define sys_ioctl		compat_sys_ioctl
-#define sys_fcntl		compat_sys_fcntl
-#define sys_ustat		compat_sys_ustat
-#define sys_sigaction		compat_sys_sigaction
-#define sys_sigsuspend		compat_sys_sigsuspend
-#define sys_sigpending		compat_sys_sigpending
-#define sys_setrlimit		compat_sys_setrlimit
-#define sys_getrusage		compat_sys_getrusage
-#define sys_gettimeofday	compat_sys_gettimeofday
-#define sys_settimeofday	compat_sys_settimeofday
-#define sys_statfs		compat_sys_statfs
-#define sys_fstatfs		compat_sys_fstatfs
-#define sys_setitimer		compat_sys_setitimer
-#define sys_getitimer		compat_sys_getitimer
-#define sys_newstat		compat_sys_newstat
-#define sys_newlstat		compat_sys_newlstat
-#define sys_newfstat		compat_sys_newfstat
-#define sys_wait4		compat_sys_wait4
-#define sys_sysinfo		compat_sys_sysinfo
-#define sys_sigreturn		compat_sys_sigreturn_wrapper
-#define sys_clone		compat_sys_clone_wrapper
-#define sys_adjtimex		compat_sys_adjtimex
-#define sys_sigprocmask		compat_sys_sigprocmask
-#define sys_getdents		compat_sys_getdents
-#define sys_select		compat_sys_select
-#define sys_readv		compat_sys_readv
-#define sys_writev		compat_sys_writev
-#define sys_sysctl		compat_sys_sysctl
-#define sys_sched_rr_get_interval compat_sys_sched_rr_get_interval
-#define sys_nanosleep		compat_sys_nanosleep
-#define sys_rt_sigreturn	compat_sys_rt_sigreturn_wrapper
-#define sys_rt_sigaction	compat_sys_rt_sigaction
-#define sys_rt_sigprocmask	compat_sys_rt_sigprocmask
-#define sys_rt_sigpending	compat_sys_rt_sigpending
-#define sys_rt_sigtimedwait	compat_sys_rt_sigtimedwait
-#define sys_rt_sigqueueinfo	compat_sys_rt_sigqueueinfo
-#define sys_rt_sigsuspend	compat_sys_rt_sigsuspend
-#define sys_pread64		compat_sys_pread64_wrapper
-#define sys_pwrite64		compat_sys_pwrite64_wrapper
-#define sys_sigaltstack		compat_sys_sigaltstack_wrapper
-#define sys_sendfile		compat_sys_sendfile
-#define sys_vfork		compat_sys_vfork_wrapper
-#define sys_getrlimit		compat_sys_getrlimit
-#define sys_mmap2		sys_mmap_pgoff
-#define sys_truncate64		compat_sys_truncate64_wrapper
-#define sys_ftruncate64		compat_sys_ftruncate64_wrapper
-#define sys_getdents64		compat_sys_getdents64
-#define sys_fcntl64		compat_sys_fcntl64
-#define sys_readahead		compat_sys_readahead_wrapper
-#define sys_futex		compat_sys_futex
-#define sys_sched_setaffinity	compat_sys_sched_setaffinity
-#define sys_sched_getaffinity	compat_sys_sched_getaffinity
-#define sys_io_setup		compat_sys_io_setup
-#define sys_io_getevents	compat_sys_io_getevents
-#define sys_io_submit		compat_sys_io_submit
-#define sys_lookup_dcookie	compat_sys_lookup_dcookie
-#define sys_timer_create	compat_sys_timer_create
-#define sys_timer_settime	compat_sys_timer_settime
-#define sys_timer_gettime	compat_sys_timer_gettime
-#define sys_clock_settime	compat_sys_clock_settime
-#define sys_clock_gettime	compat_sys_clock_gettime
-#define sys_clock_getres	compat_sys_clock_getres
-#define sys_clock_nanosleep	compat_sys_clock_nanosleep
-#define sys_statfs64		compat_sys_statfs64_wrapper
-#define sys_fstatfs64		compat_sys_fstatfs64_wrapper
-#define sys_utimes		compat_sys_utimes
-#define sys_fadvise64_64	compat_sys_fadvise64_64_wrapper
-#define sys_mq_open		compat_sys_mq_open
-#define sys_mq_timedsend	compat_sys_mq_timedsend
-#define sys_mq_timedreceive	compat_sys_mq_timedreceive
-#define sys_mq_notify		compat_sys_mq_notify
-#define sys_mq_getsetattr	compat_sys_mq_getsetattr
-#define sys_waitid		compat_sys_waitid
-#define sys_recv		compat_sys_recv
-#define sys_recvfrom		compat_sys_recvfrom
-#define sys_setsockopt		compat_sys_setsockopt
-#define sys_getsockopt		compat_sys_getsockopt
-#define sys_sendmsg		compat_sys_sendmsg
-#define sys_recvmsg		compat_sys_recvmsg
-#define sys_semctl		compat_sys_semctl
-#define sys_msgsnd		compat_sys_msgsnd
-#define sys_msgrcv		compat_sys_msgrcv
-#define sys_msgctl		compat_sys_msgctl
-#define sys_shmat		compat_sys_shmat
-#define sys_shmctl		compat_sys_shmctl
-#define sys_keyctl		compat_sys_keyctl
-#define sys_semtimedop		compat_sys_semtimedop
-#define sys_mbind		compat_sys_mbind
-#define sys_get_mempolicy	compat_sys_get_mempolicy
-#define sys_set_mempolicy	compat_sys_set_mempolicy
-#define sys_openat		compat_sys_openat
-#define sys_futimesat		compat_sys_futimesat
-#define sys_pselect6		compat_sys_pselect6
-#define sys_ppoll		compat_sys_ppoll
-#define sys_set_robust_list	compat_sys_set_robust_list
-#define sys_get_robust_list	compat_sys_get_robust_list
-#define sys_sync_file_range2	compat_sys_sync_file_range2_wrapper
-#define sys_vmsplice		compat_sys_vmsplice
-#define sys_move_pages		compat_sys_move_pages
-#define sys_epoll_pwait		compat_sys_epoll_pwait
-#define sys_kexec_load		compat_sys_kexec_load
-#define sys_utimensat		compat_sys_utimensat
-#define sys_signalfd		compat_sys_signalfd
-#define sys_fallocate		compat_sys_fallocate_wrapper
-#define sys_timerfd_settime	compat_sys_timerfd_settime
-#define sys_timerfd_gettime	compat_sys_timerfd_gettime
-#define sys_signalfd4		compat_sys_signalfd4
-#define sys_preadv		compat_sys_preadv
-#define sys_pwritev		compat_sys_pwritev
-#define sys_rt_tgsigqueueinfo	compat_sys_rt_tgsigqueueinfo
-#define sys_recvmmsg		compat_sys_recvmmsg
-#define sys_fanotify_mark	compat_sys_fanotify_mark_wrapper
-
 #undef __SYSCALL
 #define __SYSCALL(x, y)		.quad	y	// x
-#define __SYSCALL_COMPAT
 
 /*
  * The system calls table must be 4KB aligned.
  */
 	.align	12
 ENTRY(compat_sys_call_table)
-#include <asm/unistd.h>
+#include <asm/unistd32.h>
diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c
index 93f10e2..906e3bd 100644
--- a/arch/arm64/kernel/sys_compat.c
+++ b/arch/arm64/kernel/sys_compat.c
@@ -18,8 +18,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#define __SYSCALL_COMPAT
-
 #include <linux/compat.h>
 #include <linux/personality.h>
 #include <linux/sched.h>
@@ -28,7 +26,7 @@
 #include <linux/uaccess.h>
 
 #include <asm/cacheflush.h>
-#include <asm/unistd.h>
+#include <asm/unistd32.h>
 
 asmlinkage int compat_sys_fork(struct pt_regs *regs)
 {
@@ -56,14 +54,14 @@
 				 struct pt_regs *regs)
 {
 	int error;
-	char * filename;
+	struct filename *filename;
 
 	filename = getname(filenamei);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = compat_do_execve(filename, compat_ptr(argv), compat_ptr(envp),
-				 regs);
+	error = compat_do_execve(filename->name, compat_ptr(argv),
+					compat_ptr(envp), regs);
 	putname(filename);
 out:
 	return error;
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
index be0433e..4807ded 100644
--- a/arch/avr32/include/asm/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
@@ -1,6 +1,3 @@
-include include/asm-generic/Kbuild.asm
 
 generic-y	+= clkdev.h
 generic-y	+= exec.h
-
-header-y	+= cachectl.h
diff --git a/arch/avr32/include/asm/param.h b/arch/avr32/include/asm/param.h
index 34bc8d4..009a167 100644
--- a/arch/avr32/include/asm/param.h
+++ b/arch/avr32/include/asm/param.h
@@ -1,23 +1,9 @@
 #ifndef __ASM_AVR32_PARAM_H
 #define __ASM_AVR32_PARAM_H
 
-#ifdef __KERNEL__
+#include <uapi/asm/param.h>
+
 # define HZ		CONFIG_HZ
 # define USER_HZ	100		/* User interfaces are in "ticks" */
 # define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
-#endif
-
-#ifndef HZ
-# define HZ		100
-#endif
-
-/* TODO: Should be configurable */
-#define EXEC_PAGESIZE	4096
-
-#ifndef NOGROUP
-# define NOGROUP	(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64
-
 #endif /* __ASM_AVR32_PARAM_H */
diff --git a/arch/avr32/include/asm/ptrace.h b/arch/avr32/include/asm/ptrace.h
index c67a007..8d3c412 100644
--- a/arch/avr32/include/asm/ptrace.h
+++ b/arch/avr32/include/asm/ptrace.h
@@ -8,119 +8,9 @@
 #ifndef __ASM_AVR32_PTRACE_H
 #define __ASM_AVR32_PTRACE_H
 
-#define PTRACE_GETREGS		12
-#define PTRACE_SETREGS		13
-
-/*
- * Status Register bits
- */
-#define SR_H		0x20000000
-#define SR_J		0x10000000
-#define SR_DM		0x08000000
-#define SR_D		0x04000000
-#define MODE_NMI	0x01c00000
-#define MODE_EXCEPTION	0x01800000
-#define MODE_INT3	0x01400000
-#define MODE_INT2	0x01000000
-#define MODE_INT1	0x00c00000
-#define MODE_INT0	0x00800000
-#define MODE_SUPERVISOR	0x00400000
-#define MODE_USER	0x00000000
-#define MODE_MASK	0x01c00000
-#define SR_EM		0x00200000
-#define SR_I3M		0x00100000
-#define SR_I2M		0x00080000
-#define SR_I1M		0x00040000
-#define SR_I0M		0x00020000
-#define SR_GM		0x00010000
-
-#define SR_H_BIT	29
-#define SR_J_BIT	28
-#define SR_DM_BIT	27
-#define SR_D_BIT	26
-#define MODE_SHIFT	22
-#define SR_EM_BIT	21
-#define SR_I3M_BIT	20
-#define SR_I2M_BIT	19
-#define SR_I1M_BIT	18
-#define SR_I0M_BIT	17
-#define SR_GM_BIT	16
-
-/* The user-visible part */
-#define SR_L		0x00000020
-#define SR_Q		0x00000010
-#define SR_V		0x00000008
-#define SR_N		0x00000004
-#define SR_Z		0x00000002
-#define SR_C		0x00000001
-
-#define SR_L_BIT	5
-#define SR_Q_BIT	4
-#define SR_V_BIT	3
-#define SR_N_BIT	2
-#define SR_Z_BIT	1
-#define SR_C_BIT	0
-
-/*
- * The order is defined by the stmts instruction. r0 is stored first,
- * so it gets the highest address.
- *
- * Registers 0-12 are general-purpose registers (r12 is normally used for
- * the function return value).
- * Register 13 is the stack pointer
- * Register 14 is the link register
- * Register 15 is the program counter (retrieved from the RAR sysreg)
- */
-#define FRAME_SIZE_FULL 72
-#define REG_R12_ORIG	68
-#define REG_R0		64
-#define REG_R1		60
-#define REG_R2		56
-#define REG_R3		52
-#define REG_R4		48
-#define REG_R5		44
-#define REG_R6		40
-#define REG_R7		36
-#define REG_R8		32
-#define REG_R9		28
-#define REG_R10		24
-#define REG_R11		20
-#define REG_R12		16
-#define REG_SP		12
-#define REG_LR		 8
-
-#define FRAME_SIZE_MIN	 8
-#define REG_PC		 4
-#define REG_SR		 0
+#include <uapi/asm/ptrace.h>
 
 #ifndef __ASSEMBLY__
-struct pt_regs {
-	/* These are always saved */
-	unsigned long sr;
-	unsigned long pc;
-
-	/* These are sometimes saved */
-	unsigned long lr;
-	unsigned long sp;
-	unsigned long r12;
-	unsigned long r11;
-	unsigned long r10;
-	unsigned long r9;
-	unsigned long r8;
-	unsigned long r7;
-	unsigned long r6;
-	unsigned long r5;
-	unsigned long r4;
-	unsigned long r3;
-	unsigned long r2;
-	unsigned long r1;
-	unsigned long r0;
-
-	/* Only saved on system call */
-	unsigned long r12_orig;
-};
-
-#ifdef __KERNEL__
 
 #include <asm/ocd.h>
 
@@ -150,8 +40,5 @@
 }
 
 
-#endif /* __KERNEL__ */
-
 #endif /* ! __ASSEMBLY__ */
-
 #endif /* __ASM_AVR32_PTRACE_H */
diff --git a/arch/avr32/include/asm/setup.h b/arch/avr32/include/asm/setup.h
index 160543d..73490ae 100644
--- a/arch/avr32/include/asm/setup.h
+++ b/arch/avr32/include/asm/setup.h
@@ -11,9 +11,8 @@
 #ifndef __ASM_AVR32_SETUP_H__
 #define __ASM_AVR32_SETUP_H__
 
-#define COMMAND_LINE_SIZE 256
+#include <uapi/asm/setup.h>
 
-#ifdef __KERNEL__
 
 /* Magic number indicating that a tag table is present */
 #define ATAG_MAGIC	0xa2a25441
@@ -142,6 +141,4 @@
 
 #endif /* !__ASSEMBLY__ */
 
-#endif  /*  __KERNEL__  */
-
 #endif /* __ASM_AVR32_SETUP_H__ */
diff --git a/arch/avr32/include/asm/signal.h b/arch/avr32/include/asm/signal.h
index ae56849..4d502fd 100644
--- a/arch/avr32/include/asm/signal.h
+++ b/arch/avr32/include/asm/signal.h
@@ -8,12 +8,8 @@
 #ifndef __ASM_AVR32_SIGNAL_H
 #define __ASM_AVR32_SIGNAL_H
 
-#include <linux/types.h>
+#include <uapi/asm/signal.h>
 
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
 /* Most things should be clean enough to redefine this at will, if care
    is taken to make libc match.  */
 
@@ -27,94 +23,6 @@
 	unsigned long sig[_NSIG_WORDS];
 } sigset_t;
 
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	(_NSIG-1)
-
-/*
- * SA_FLAGS values:
- *
- * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
- * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
- * SA_SIGINFO		deliver the signal with SIGINFO structs
- * SA_ONSTACK		indicates that a registered stack_t will be used.
- * SA_RESTART		flag to get restarting signals (which were the default long ago)
- * SA_NODEFER		prevents the current signal from being masked in the handler.
- * SA_RESETHAND		clears the handler when the signal is delivered.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_RESTORER	0x04000000
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal-defs.h>
-
-#ifdef __KERNEL__
 struct sigaction {
 	__sighandler_t sa_handler;
 	unsigned long sa_flags;
@@ -125,37 +33,10 @@
 struct k_sigaction {
 	struct sigaction sa;
 };
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-		__sighandler_t _sa_handler;
-		void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
 
 #include <asm/sigcontext.h>
 #undef __HAVE_ARCH_SIG_BITOPS
 
 #define ptrace_signal_deliver(regs, cookie) do { } while (0)
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/arch/avr32/include/asm/termios.h b/arch/avr32/include/asm/termios.h
index dd7e9da..9d59437 100644
--- a/arch/avr32/include/asm/termios.h
+++ b/arch/avr32/include/asm/termios.h
@@ -8,45 +8,8 @@
 #ifndef __ASM_AVR32_TERMIOS_H
 #define __ASM_AVR32_TERMIOS_H
 
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
+#include <uapi/asm/termios.h>
 
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
 /*	intr=^C		quit=^\		erase=del	kill=^U
 	eof=^D		vtime=\0	vmin=\1		sxtc=\0
 	start=^Q	stop=^S		susp=^Z		eol=\0
@@ -57,6 +20,4 @@
 
 #include <asm-generic/termios-base.h>
 
-#endif	/* __KERNEL__ */
-
 #endif	/* __ASM_AVR32_TERMIOS_H */
diff --git a/arch/avr32/include/asm/types.h b/arch/avr32/include/asm/types.h
index 9bb2d8b..5932405 100644
--- a/arch/avr32/include/asm/types.h
+++ b/arch/avr32/include/asm/types.h
@@ -8,16 +8,12 @@
 #ifndef __ASM_AVR32_TYPES_H
 #define __ASM_AVR32_TYPES_H
 
-#include <asm-generic/int-ll64.h>
+#include <uapi/asm/types.h>
 
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
-#ifdef __KERNEL__
 
 #define BITS_PER_LONG 32
 
-#endif /* __KERNEL__ */
-
-
 #endif /* __ASM_AVR32_TYPES_H */
diff --git a/arch/avr32/include/asm/unistd.h b/arch/avr32/include/asm/unistd.h
index 1358e36..157b4bd 100644
--- a/arch/avr32/include/asm/unistd.h
+++ b/arch/avr32/include/asm/unistd.h
@@ -8,300 +8,8 @@
 #ifndef __ASM_AVR32_UNISTD_H
 #define __ASM_AVR32_UNISTD_H
 
-/*
- * This file contains the system call numbers.
- */
+#include <uapi/asm/unistd.h>
 
-#define __NR_restart_syscall      0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_umask		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_chown		 16
-#define __NR_lchown		 17
-#define __NR_lseek		 18
-#define __NR__llseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount2		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_pause		 28
-#define __NR_utime		 29
-#define __NR_stat		 30
-#define __NR_fstat		 31
-#define __NR_lstat		 32
-#define __NR_access		 33
-#define __NR_chroot		 34
-#define __NR_sync		 35
-#define __NR_fsync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_clone		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_getcwd		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_setfsuid		 52
-#define __NR_setfsgid		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_setpgid		 56
-#define __NR_mremap		 57
-#define __NR_setresuid		 58
-#define __NR_getresuid		 59
-#define __NR_setreuid		 60
-#define __NR_setregid		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_rt_sigaction	 67
-#define __NR_rt_sigreturn	 68
-#define __NR_rt_sigprocmask	 69
-#define __NR_rt_sigpending	 70
-#define __NR_rt_sigtimedwait	 71
-#define __NR_rt_sigqueueinfo	 72
-#define __NR_rt_sigsuspend	 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76	/* SuS compliant getrlimit */
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_fchdir		 84
-#define __NR_readlink		 85
-#define __NR_pread		 86
-#define __NR_pwrite		 87
-#define __NR_swapon		 88
-#define __NR_reboot		 89
-#define __NR_mmap2		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_wait4		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_vhangup		101
-#define __NR_sigaltstack	102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_swapoff		106
-#define __NR_sysinfo		107
-/* 108 was __NR_ipc for a little while */
-#define __NR_sendfile		109
-#define __NR_setdomainname	110
-#define __NR_uname		111
-#define __NR_adjtimex		112
-#define __NR_mprotect		113
-#define __NR_vfork		114
-#define __NR_init_module	115
-#define __NR_delete_module	116
-#define __NR_quotactl		117
-#define __NR_getpgid		118
-#define __NR_bdflush		119
-#define __NR_sysfs		120
-#define __NR_personality	121
-#define __NR_afs_syscall	122 /* Syscall for Andrew File System */
-#define __NR_getdents		123
-#define __NR_flock		124
-#define __NR_msync		125
-#define __NR_readv		126
-#define __NR_writev		127
-#define __NR_getsid		128
-#define __NR_fdatasync		129
-#define __NR__sysctl		130
-#define __NR_mlock		131
-#define __NR_munlock		132
-#define __NR_mlockall		133
-#define __NR_munlockall		134
-#define __NR_sched_setparam		135
-#define __NR_sched_getparam		136
-#define __NR_sched_setscheduler		137
-#define __NR_sched_getscheduler		138
-#define __NR_sched_yield		139
-#define __NR_sched_get_priority_max	140
-#define __NR_sched_get_priority_min	141
-#define __NR_sched_rr_get_interval	142
-#define __NR_nanosleep		143
-#define __NR_poll		144
-#define __NR_nfsservctl		145
-#define __NR_setresgid		146
-#define __NR_getresgid		147
-#define __NR_prctl              148
-#define __NR_socket		149
-#define __NR_bind		150
-#define __NR_connect		151
-#define __NR_listen		152
-#define __NR_accept		153
-#define __NR_getsockname	154
-#define __NR_getpeername	155
-#define __NR_socketpair		156
-#define __NR_send		157
-#define __NR_recv		158
-#define __NR_sendto		159
-#define __NR_recvfrom		160
-#define __NR_shutdown		161
-#define __NR_setsockopt		162
-#define __NR_getsockopt		163
-#define __NR_sendmsg		164
-#define __NR_recvmsg		165
-#define __NR_truncate64		166
-#define __NR_ftruncate64	167
-#define __NR_stat64		168
-#define __NR_lstat64		169
-#define __NR_fstat64		170
-#define __NR_pivot_root		171
-#define __NR_mincore		172
-#define __NR_madvise		173
-#define __NR_getdents64		174
-#define __NR_fcntl64		175
-#define __NR_gettid		176
-#define __NR_readahead		177
-#define __NR_setxattr		178
-#define __NR_lsetxattr		179
-#define __NR_fsetxattr		180
-#define __NR_getxattr		181
-#define __NR_lgetxattr		182
-#define __NR_fgetxattr		183
-#define __NR_listxattr		184
-#define __NR_llistxattr		185
-#define __NR_flistxattr		186
-#define __NR_removexattr	187
-#define __NR_lremovexattr	188
-#define __NR_fremovexattr	189
-#define __NR_tkill		190
-#define __NR_sendfile64		191
-#define __NR_futex		192
-#define __NR_sched_setaffinity	193
-#define __NR_sched_getaffinity	194
-#define __NR_capget		195
-#define __NR_capset		196
-#define __NR_io_setup		197
-#define __NR_io_destroy		198
-#define __NR_io_getevents	199
-#define __NR_io_submit		200
-#define __NR_io_cancel		201
-#define __NR_fadvise64		202
-#define __NR_exit_group		203
-#define __NR_lookup_dcookie	204
-#define __NR_epoll_create	205
-#define __NR_epoll_ctl		206
-#define __NR_epoll_wait		207
-#define __NR_remap_file_pages	208
-#define __NR_set_tid_address	209
-
-#define __NR_timer_create	210
-#define __NR_timer_settime	211
-#define __NR_timer_gettime	212
-#define __NR_timer_getoverrun	213
-#define __NR_timer_delete	214
-#define __NR_clock_settime	215
-#define __NR_clock_gettime	216
-#define __NR_clock_getres	217
-#define __NR_clock_nanosleep	218
-#define __NR_statfs64		219
-#define __NR_fstatfs64		220
-#define __NR_tgkill		221
-				/* 222 reserved for tux */
-#define __NR_utimes		223
-#define __NR_fadvise64_64	224
-
-#define __NR_cacheflush		225
-
-#define __NR_vserver		226
-#define __NR_mq_open		227
-#define __NR_mq_unlink		228
-#define __NR_mq_timedsend	229
-#define __NR_mq_timedreceive	230
-#define __NR_mq_notify		231
-#define __NR_mq_getsetattr	232
-#define __NR_kexec_load		233
-#define __NR_waitid		234
-#define __NR_add_key		235
-#define __NR_request_key	236
-#define __NR_keyctl		237
-#define __NR_ioprio_set		238
-#define __NR_ioprio_get		239
-#define __NR_inotify_init	240
-#define __NR_inotify_add_watch	241
-#define __NR_inotify_rm_watch	242
-#define __NR_openat		243
-#define __NR_mkdirat		244
-#define __NR_mknodat		245
-#define __NR_fchownat		246
-#define __NR_futimesat		247
-#define __NR_fstatat64		248
-#define __NR_unlinkat		249
-#define __NR_renameat		250
-#define __NR_linkat		251
-#define __NR_symlinkat		252
-#define __NR_readlinkat		253
-#define __NR_fchmodat		254
-#define __NR_faccessat		255
-#define __NR_pselect6		256
-#define __NR_ppoll		257
-#define __NR_unshare		258
-#define __NR_set_robust_list	259
-#define __NR_get_robust_list	260
-#define __NR_splice		261
-#define __NR_sync_file_range	262
-#define __NR_tee		263
-#define __NR_vmsplice		264
-#define __NR_epoll_pwait	265
-
-#define __NR_msgget		266
-#define __NR_msgsnd		267
-#define __NR_msgrcv		268
-#define __NR_msgctl		269
-#define __NR_semget		270
-#define __NR_semop		271
-#define __NR_semctl		272
-#define __NR_semtimedop		273
-#define __NR_shmat		274
-#define __NR_shmget		275
-#define __NR_shmdt		276
-#define __NR_shmctl		277
-
-#define __NR_utimensat		278
-#define __NR_signalfd		279
-/* 280 was __NR_timerfd */
-#define __NR_eventfd		281
-#define __NR_setns		283
-
-#ifdef __KERNEL__
 #define NR_syscalls		284
 
 /* Old stuff */
@@ -340,6 +48,4 @@
  */
 #define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
 
-#endif /* __KERNEL__ */
-
 #endif /* __ASM_AVR32_UNISTD_H */
diff --git a/arch/avr32/include/uapi/asm/Kbuild b/arch/avr32/include/uapi/asm/Kbuild
index baebb3d..df53e7a 100644
--- a/arch/avr32/include/uapi/asm/Kbuild
+++ b/arch/avr32/include/uapi/asm/Kbuild
@@ -1,3 +1,35 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += byteorder.h
+header-y += cachectl.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += kvm_para.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += param.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ptrace.h
+header-y += resource.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += unistd.h
diff --git a/arch/avr32/include/asm/auxvec.h b/arch/avr32/include/uapi/asm/auxvec.h
similarity index 100%
rename from arch/avr32/include/asm/auxvec.h
rename to arch/avr32/include/uapi/asm/auxvec.h
diff --git a/arch/avr32/include/asm/bitsperlong.h b/arch/avr32/include/uapi/asm/bitsperlong.h
similarity index 100%
rename from arch/avr32/include/asm/bitsperlong.h
rename to arch/avr32/include/uapi/asm/bitsperlong.h
diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/avr32/include/asm/byteorder.h
rename to arch/avr32/include/uapi/asm/byteorder.h
diff --git a/arch/avr32/include/asm/cachectl.h b/arch/avr32/include/uapi/asm/cachectl.h
similarity index 100%
rename from arch/avr32/include/asm/cachectl.h
rename to arch/avr32/include/uapi/asm/cachectl.h
diff --git a/arch/avr32/include/asm/errno.h b/arch/avr32/include/uapi/asm/errno.h
similarity index 100%
rename from arch/avr32/include/asm/errno.h
rename to arch/avr32/include/uapi/asm/errno.h
diff --git a/arch/avr32/include/asm/fcntl.h b/arch/avr32/include/uapi/asm/fcntl.h
similarity index 100%
rename from arch/avr32/include/asm/fcntl.h
rename to arch/avr32/include/uapi/asm/fcntl.h
diff --git a/arch/avr32/include/asm/ioctl.h b/arch/avr32/include/uapi/asm/ioctl.h
similarity index 100%
rename from arch/avr32/include/asm/ioctl.h
rename to arch/avr32/include/uapi/asm/ioctl.h
diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/uapi/asm/ioctls.h
similarity index 100%
rename from arch/avr32/include/asm/ioctls.h
rename to arch/avr32/include/uapi/asm/ioctls.h
diff --git a/arch/avr32/include/asm/ipcbuf.h b/arch/avr32/include/uapi/asm/ipcbuf.h
similarity index 100%
rename from arch/avr32/include/asm/ipcbuf.h
rename to arch/avr32/include/uapi/asm/ipcbuf.h
diff --git a/arch/avr32/include/asm/kvm_para.h b/arch/avr32/include/uapi/asm/kvm_para.h
similarity index 100%
rename from arch/avr32/include/asm/kvm_para.h
rename to arch/avr32/include/uapi/asm/kvm_para.h
diff --git a/arch/avr32/include/asm/mman.h b/arch/avr32/include/uapi/asm/mman.h
similarity index 100%
rename from arch/avr32/include/asm/mman.h
rename to arch/avr32/include/uapi/asm/mman.h
diff --git a/arch/avr32/include/asm/msgbuf.h b/arch/avr32/include/uapi/asm/msgbuf.h
similarity index 100%
rename from arch/avr32/include/asm/msgbuf.h
rename to arch/avr32/include/uapi/asm/msgbuf.h
diff --git a/arch/avr32/include/uapi/asm/param.h b/arch/avr32/include/uapi/asm/param.h
new file mode 100644
index 0000000..d28aa5e
--- /dev/null
+++ b/arch/avr32/include/uapi/asm/param.h
@@ -0,0 +1,18 @@
+#ifndef _UAPI__ASM_AVR32_PARAM_H
+#define _UAPI__ASM_AVR32_PARAM_H
+
+
+#ifndef HZ
+# define HZ		100
+#endif
+
+/* TODO: Should be configurable */
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+# define NOGROUP	(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64
+
+#endif /* _UAPI__ASM_AVR32_PARAM_H */
diff --git a/arch/avr32/include/asm/poll.h b/arch/avr32/include/uapi/asm/poll.h
similarity index 100%
rename from arch/avr32/include/asm/poll.h
rename to arch/avr32/include/uapi/asm/poll.h
diff --git a/arch/avr32/include/asm/posix_types.h b/arch/avr32/include/uapi/asm/posix_types.h
similarity index 100%
rename from arch/avr32/include/asm/posix_types.h
rename to arch/avr32/include/uapi/asm/posix_types.h
diff --git a/arch/avr32/include/uapi/asm/ptrace.h b/arch/avr32/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..fe8c162
--- /dev/null
+++ b/arch/avr32/include/uapi/asm/ptrace.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPI__ASM_AVR32_PTRACE_H
+#define _UAPI__ASM_AVR32_PTRACE_H
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+
+/*
+ * Status Register bits
+ */
+#define SR_H		0x20000000
+#define SR_J		0x10000000
+#define SR_DM		0x08000000
+#define SR_D		0x04000000
+#define MODE_NMI	0x01c00000
+#define MODE_EXCEPTION	0x01800000
+#define MODE_INT3	0x01400000
+#define MODE_INT2	0x01000000
+#define MODE_INT1	0x00c00000
+#define MODE_INT0	0x00800000
+#define MODE_SUPERVISOR	0x00400000
+#define MODE_USER	0x00000000
+#define MODE_MASK	0x01c00000
+#define SR_EM		0x00200000
+#define SR_I3M		0x00100000
+#define SR_I2M		0x00080000
+#define SR_I1M		0x00040000
+#define SR_I0M		0x00020000
+#define SR_GM		0x00010000
+
+#define SR_H_BIT	29
+#define SR_J_BIT	28
+#define SR_DM_BIT	27
+#define SR_D_BIT	26
+#define MODE_SHIFT	22
+#define SR_EM_BIT	21
+#define SR_I3M_BIT	20
+#define SR_I2M_BIT	19
+#define SR_I1M_BIT	18
+#define SR_I0M_BIT	17
+#define SR_GM_BIT	16
+
+/* The user-visible part */
+#define SR_L		0x00000020
+#define SR_Q		0x00000010
+#define SR_V		0x00000008
+#define SR_N		0x00000004
+#define SR_Z		0x00000002
+#define SR_C		0x00000001
+
+#define SR_L_BIT	5
+#define SR_Q_BIT	4
+#define SR_V_BIT	3
+#define SR_N_BIT	2
+#define SR_Z_BIT	1
+#define SR_C_BIT	0
+
+/*
+ * The order is defined by the stmts instruction. r0 is stored first,
+ * so it gets the highest address.
+ *
+ * Registers 0-12 are general-purpose registers (r12 is normally used for
+ * the function return value).
+ * Register 13 is the stack pointer
+ * Register 14 is the link register
+ * Register 15 is the program counter (retrieved from the RAR sysreg)
+ */
+#define FRAME_SIZE_FULL 72
+#define REG_R12_ORIG	68
+#define REG_R0		64
+#define REG_R1		60
+#define REG_R2		56
+#define REG_R3		52
+#define REG_R4		48
+#define REG_R5		44
+#define REG_R6		40
+#define REG_R7		36
+#define REG_R8		32
+#define REG_R9		28
+#define REG_R10		24
+#define REG_R11		20
+#define REG_R12		16
+#define REG_SP		12
+#define REG_LR		 8
+
+#define FRAME_SIZE_MIN	 8
+#define REG_PC		 4
+#define REG_SR		 0
+
+#ifndef __ASSEMBLY__
+struct pt_regs {
+	/* These are always saved */
+	unsigned long sr;
+	unsigned long pc;
+
+	/* These are sometimes saved */
+	unsigned long lr;
+	unsigned long sp;
+	unsigned long r12;
+	unsigned long r11;
+	unsigned long r10;
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long r7;
+	unsigned long r6;
+	unsigned long r5;
+	unsigned long r4;
+	unsigned long r3;
+	unsigned long r2;
+	unsigned long r1;
+	unsigned long r0;
+
+	/* Only saved on system call */
+	unsigned long r12_orig;
+};
+
+
+#endif /* ! __ASSEMBLY__ */
+
+#endif /* _UAPI__ASM_AVR32_PTRACE_H */
diff --git a/arch/avr32/include/asm/resource.h b/arch/avr32/include/uapi/asm/resource.h
similarity index 100%
rename from arch/avr32/include/asm/resource.h
rename to arch/avr32/include/uapi/asm/resource.h
diff --git a/arch/avr32/include/asm/sembuf.h b/arch/avr32/include/uapi/asm/sembuf.h
similarity index 100%
rename from arch/avr32/include/asm/sembuf.h
rename to arch/avr32/include/uapi/asm/sembuf.h
diff --git a/arch/avr32/include/uapi/asm/setup.h b/arch/avr32/include/uapi/asm/setup.h
new file mode 100644
index 0000000..e58aa93
--- /dev/null
+++ b/arch/avr32/include/uapi/asm/setup.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * Based on linux/include/asm-arm/setup.h
+ *   Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPI__ASM_AVR32_SETUP_H__
+#define _UAPI__ASM_AVR32_SETUP_H__
+
+#define COMMAND_LINE_SIZE 256
+
+
+#endif /* _UAPI__ASM_AVR32_SETUP_H__ */
diff --git a/arch/avr32/include/asm/shmbuf.h b/arch/avr32/include/uapi/asm/shmbuf.h
similarity index 100%
rename from arch/avr32/include/asm/shmbuf.h
rename to arch/avr32/include/uapi/asm/shmbuf.h
diff --git a/arch/avr32/include/asm/sigcontext.h b/arch/avr32/include/uapi/asm/sigcontext.h
similarity index 100%
rename from arch/avr32/include/asm/sigcontext.h
rename to arch/avr32/include/uapi/asm/sigcontext.h
diff --git a/arch/avr32/include/asm/siginfo.h b/arch/avr32/include/uapi/asm/siginfo.h
similarity index 100%
rename from arch/avr32/include/asm/siginfo.h
rename to arch/avr32/include/uapi/asm/siginfo.h
diff --git a/arch/avr32/include/uapi/asm/signal.h b/arch/avr32/include/uapi/asm/signal.h
new file mode 100644
index 0000000..eb46f61
--- /dev/null
+++ b/arch/avr32/include/uapi/asm/signal.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPI__ASM_AVR32_SIGNAL_H
+#define _UAPI__ASM_AVR32_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	(_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
+ * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
+ * SA_SIGINFO		deliver the signal with SIGINFO structs
+ * SA_ONSTACK		indicates that a registered stack_t will be used.
+ * SA_RESTART		flag to get restarting signals (which were the default long ago)
+ * SA_NODEFER		prevents the current signal from being masked in the handler.
+ * SA_RESETHAND		clears the handler when the signal is delivered.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_RESTORER	0x04000000
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal-defs.h>
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+		__sighandler_t _sa_handler;
+		void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+
+#endif /* _UAPI__ASM_AVR32_SIGNAL_H */
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/uapi/asm/socket.h
similarity index 100%
rename from arch/avr32/include/asm/socket.h
rename to arch/avr32/include/uapi/asm/socket.h
diff --git a/arch/avr32/include/asm/sockios.h b/arch/avr32/include/uapi/asm/sockios.h
similarity index 100%
rename from arch/avr32/include/asm/sockios.h
rename to arch/avr32/include/uapi/asm/sockios.h
diff --git a/arch/avr32/include/asm/stat.h b/arch/avr32/include/uapi/asm/stat.h
similarity index 100%
rename from arch/avr32/include/asm/stat.h
rename to arch/avr32/include/uapi/asm/stat.h
diff --git a/arch/avr32/include/asm/statfs.h b/arch/avr32/include/uapi/asm/statfs.h
similarity index 100%
rename from arch/avr32/include/asm/statfs.h
rename to arch/avr32/include/uapi/asm/statfs.h
diff --git a/arch/avr32/include/asm/swab.h b/arch/avr32/include/uapi/asm/swab.h
similarity index 100%
rename from arch/avr32/include/asm/swab.h
rename to arch/avr32/include/uapi/asm/swab.h
diff --git a/arch/avr32/include/asm/termbits.h b/arch/avr32/include/uapi/asm/termbits.h
similarity index 100%
rename from arch/avr32/include/asm/termbits.h
rename to arch/avr32/include/uapi/asm/termbits.h
diff --git a/arch/avr32/include/uapi/asm/termios.h b/arch/avr32/include/uapi/asm/termios.h
new file mode 100644
index 0000000..b8ef8ea
--- /dev/null
+++ b/arch/avr32/include/uapi/asm/termios.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPI__ASM_AVR32_TERMIOS_H
+#define _UAPI__ASM_AVR32_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+
+#endif /* _UAPI__ASM_AVR32_TERMIOS_H */
diff --git a/arch/avr32/include/uapi/asm/types.h b/arch/avr32/include/uapi/asm/types.h
new file mode 100644
index 0000000..bb34ad3
--- /dev/null
+++ b/arch/avr32/include/uapi/asm/types.h
@@ -0,0 +1,8 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm-generic/int-ll64.h>
diff --git a/arch/avr32/include/uapi/asm/unistd.h b/arch/avr32/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..3eaa687
--- /dev/null
+++ b/arch/avr32/include/uapi/asm/unistd.h
@@ -0,0 +1,305 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPI__ASM_AVR32_UNISTD_H
+#define _UAPI__ASM_AVR32_UNISTD_H
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_umask		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_lchown		 17
+#define __NR_lseek		 18
+#define __NR__llseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount2		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_pause		 28
+#define __NR_utime		 29
+#define __NR_stat		 30
+#define __NR_fstat		 31
+#define __NR_lstat		 32
+#define __NR_access		 33
+#define __NR_chroot		 34
+#define __NR_sync		 35
+#define __NR_fsync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_clone		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_getcwd		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_setfsuid		 52
+#define __NR_setfsgid		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_setpgid		 56
+#define __NR_mremap		 57
+#define __NR_setresuid		 58
+#define __NR_getresuid		 59
+#define __NR_setreuid		 60
+#define __NR_setregid		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_rt_sigaction	 67
+#define __NR_rt_sigreturn	 68
+#define __NR_rt_sigprocmask	 69
+#define __NR_rt_sigpending	 70
+#define __NR_rt_sigtimedwait	 71
+#define __NR_rt_sigqueueinfo	 72
+#define __NR_rt_sigsuspend	 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* SuS compliant getrlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_fchdir		 84
+#define __NR_readlink		 85
+#define __NR_pread		 86
+#define __NR_pwrite		 87
+#define __NR_swapon		 88
+#define __NR_reboot		 89
+#define __NR_mmap2		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_wait4		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_vhangup		101
+#define __NR_sigaltstack	102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_swapoff		106
+#define __NR_sysinfo		107
+/* 108 was __NR_ipc for a little while */
+#define __NR_sendfile		109
+#define __NR_setdomainname	110
+#define __NR_uname		111
+#define __NR_adjtimex		112
+#define __NR_mprotect		113
+#define __NR_vfork		114
+#define __NR_init_module	115
+#define __NR_delete_module	116
+#define __NR_quotactl		117
+#define __NR_getpgid		118
+#define __NR_bdflush		119
+#define __NR_sysfs		120
+#define __NR_personality	121
+#define __NR_afs_syscall	122 /* Syscall for Andrew File System */
+#define __NR_getdents		123
+#define __NR_flock		124
+#define __NR_msync		125
+#define __NR_readv		126
+#define __NR_writev		127
+#define __NR_getsid		128
+#define __NR_fdatasync		129
+#define __NR__sysctl		130
+#define __NR_mlock		131
+#define __NR_munlock		132
+#define __NR_mlockall		133
+#define __NR_munlockall		134
+#define __NR_sched_setparam		135
+#define __NR_sched_getparam		136
+#define __NR_sched_setscheduler		137
+#define __NR_sched_getscheduler		138
+#define __NR_sched_yield		139
+#define __NR_sched_get_priority_max	140
+#define __NR_sched_get_priority_min	141
+#define __NR_sched_rr_get_interval	142
+#define __NR_nanosleep		143
+#define __NR_poll		144
+#define __NR_nfsservctl		145
+#define __NR_setresgid		146
+#define __NR_getresgid		147
+#define __NR_prctl              148
+#define __NR_socket		149
+#define __NR_bind		150
+#define __NR_connect		151
+#define __NR_listen		152
+#define __NR_accept		153
+#define __NR_getsockname	154
+#define __NR_getpeername	155
+#define __NR_socketpair		156
+#define __NR_send		157
+#define __NR_recv		158
+#define __NR_sendto		159
+#define __NR_recvfrom		160
+#define __NR_shutdown		161
+#define __NR_setsockopt		162
+#define __NR_getsockopt		163
+#define __NR_sendmsg		164
+#define __NR_recvmsg		165
+#define __NR_truncate64		166
+#define __NR_ftruncate64	167
+#define __NR_stat64		168
+#define __NR_lstat64		169
+#define __NR_fstat64		170
+#define __NR_pivot_root		171
+#define __NR_mincore		172
+#define __NR_madvise		173
+#define __NR_getdents64		174
+#define __NR_fcntl64		175
+#define __NR_gettid		176
+#define __NR_readahead		177
+#define __NR_setxattr		178
+#define __NR_lsetxattr		179
+#define __NR_fsetxattr		180
+#define __NR_getxattr		181
+#define __NR_lgetxattr		182
+#define __NR_fgetxattr		183
+#define __NR_listxattr		184
+#define __NR_llistxattr		185
+#define __NR_flistxattr		186
+#define __NR_removexattr	187
+#define __NR_lremovexattr	188
+#define __NR_fremovexattr	189
+#define __NR_tkill		190
+#define __NR_sendfile64		191
+#define __NR_futex		192
+#define __NR_sched_setaffinity	193
+#define __NR_sched_getaffinity	194
+#define __NR_capget		195
+#define __NR_capset		196
+#define __NR_io_setup		197
+#define __NR_io_destroy		198
+#define __NR_io_getevents	199
+#define __NR_io_submit		200
+#define __NR_io_cancel		201
+#define __NR_fadvise64		202
+#define __NR_exit_group		203
+#define __NR_lookup_dcookie	204
+#define __NR_epoll_create	205
+#define __NR_epoll_ctl		206
+#define __NR_epoll_wait		207
+#define __NR_remap_file_pages	208
+#define __NR_set_tid_address	209
+
+#define __NR_timer_create	210
+#define __NR_timer_settime	211
+#define __NR_timer_gettime	212
+#define __NR_timer_getoverrun	213
+#define __NR_timer_delete	214
+#define __NR_clock_settime	215
+#define __NR_clock_gettime	216
+#define __NR_clock_getres	217
+#define __NR_clock_nanosleep	218
+#define __NR_statfs64		219
+#define __NR_fstatfs64		220
+#define __NR_tgkill		221
+				/* 222 reserved for tux */
+#define __NR_utimes		223
+#define __NR_fadvise64_64	224
+
+#define __NR_cacheflush		225
+
+#define __NR_vserver		226
+#define __NR_mq_open		227
+#define __NR_mq_unlink		228
+#define __NR_mq_timedsend	229
+#define __NR_mq_timedreceive	230
+#define __NR_mq_notify		231
+#define __NR_mq_getsetattr	232
+#define __NR_kexec_load		233
+#define __NR_waitid		234
+#define __NR_add_key		235
+#define __NR_request_key	236
+#define __NR_keyctl		237
+#define __NR_ioprio_set		238
+#define __NR_ioprio_get		239
+#define __NR_inotify_init	240
+#define __NR_inotify_add_watch	241
+#define __NR_inotify_rm_watch	242
+#define __NR_openat		243
+#define __NR_mkdirat		244
+#define __NR_mknodat		245
+#define __NR_fchownat		246
+#define __NR_futimesat		247
+#define __NR_fstatat64		248
+#define __NR_unlinkat		249
+#define __NR_renameat		250
+#define __NR_linkat		251
+#define __NR_symlinkat		252
+#define __NR_readlinkat		253
+#define __NR_fchmodat		254
+#define __NR_faccessat		255
+#define __NR_pselect6		256
+#define __NR_ppoll		257
+#define __NR_unshare		258
+#define __NR_set_robust_list	259
+#define __NR_get_robust_list	260
+#define __NR_splice		261
+#define __NR_sync_file_range	262
+#define __NR_tee		263
+#define __NR_vmsplice		264
+#define __NR_epoll_pwait	265
+
+#define __NR_msgget		266
+#define __NR_msgsnd		267
+#define __NR_msgrcv		268
+#define __NR_msgctl		269
+#define __NR_semget		270
+#define __NR_semop		271
+#define __NR_semctl		272
+#define __NR_semtimedop		273
+#define __NR_shmat		274
+#define __NR_shmget		275
+#define __NR_shmdt		276
+#define __NR_shmctl		277
+
+#define __NR_utimensat		278
+#define __NR_signalfd		279
+/* 280 was __NR_timerfd */
+#define __NR_eventfd		281
+#define __NR_setns		283
+
+
+#endif /* _UAPI__ASM_AVR32_UNISTD_H */
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 92c5af9..1bb0a8a 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -388,14 +388,14 @@
 			  struct pt_regs *regs)
 {
 	int error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname(ufilename);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
 
-	error = do_execve(filename, uargv, uenvp, regs);
+	error = do_execve(filename->name, uargv, uenvp, regs);
 	putname(filename);
 
 out:
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 62bcea7..bb1cc72 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -213,14 +213,14 @@
 			  const char __user *const __user *envp)
 {
 	int error;
-	char *filename;
+	struct filename *filename;
 	struct pt_regs *regs = (struct pt_regs *)((&name) + 6);
 
 	filename = getname(name);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		return error;
-	error = do_execve(filename, argv, envp, regs);
+	error = do_execve(filename->name, argv, envp, regs);
 	putname(filename);
 	return error;
 }
diff --git a/arch/c6x/include/asm/Kbuild b/arch/c6x/include/asm/Kbuild
index 4e4e98d..112a496 100644
--- a/arch/c6x/include/asm/Kbuild
+++ b/arch/c6x/include/asm/Kbuild
@@ -1,4 +1,3 @@
-include include/asm-generic/Kbuild.asm
 
 generic-y += atomic.h
 generic-y += auxvec.h
diff --git a/arch/c6x/include/asm/ptrace.h b/arch/c6x/include/asm/ptrace.h
index b04ff59..76da6ad 100644
--- a/arch/c6x/include/asm/ptrace.h
+++ b/arch/c6x/include/asm/ptrace.h
@@ -11,156 +11,13 @@
 #ifndef _ASM_C6X_PTRACE_H
 #define _ASM_C6X_PTRACE_H
 
-#define BKPT_OPCODE	0x56454314	/* illegal opcode */
-
-#ifdef _BIG_ENDIAN
-#define PT_LO(odd, even)  odd
-#define PT_HI(odd, even)  even
-#else
-#define PT_LO(odd, even)  even
-#define PT_HI(odd, even)  odd
-#endif
-
-#define PT_A4_ORG  PT_LO(1, 0)
-#define PT_TSR	   PT_HI(1, 0)
-#define PT_ILC	   PT_LO(3, 2)
-#define PT_RILC    PT_HI(3, 2)
-#define PT_CSR	   PT_LO(5, 4)
-#define PT_PC	   PT_HI(5, 4)
-#define PT_B16	   PT_LO(7, 6)
-#define PT_B17	   PT_HI(7, 6)
-#define PT_B18	   PT_LO(9, 8)
-#define PT_B19	   PT_HI(9, 8)
-#define PT_B20	   PT_LO(11, 10)
-#define PT_B21	   PT_HI(11, 10)
-#define PT_B22	   PT_LO(13, 12)
-#define PT_B23	   PT_HI(13, 12)
-#define PT_B24	   PT_LO(15, 14)
-#define PT_B25	   PT_HI(15, 14)
-#define PT_B26	   PT_LO(17, 16)
-#define PT_B27	   PT_HI(17, 16)
-#define PT_B28	   PT_LO(19, 18)
-#define PT_B29	   PT_HI(19, 18)
-#define PT_B30	   PT_LO(21, 20)
-#define PT_B31	   PT_HI(21, 20)
-#define PT_B0	   PT_LO(23, 22)
-#define PT_B1	   PT_HI(23, 22)
-#define PT_B2	   PT_LO(25, 24)
-#define PT_B3	   PT_HI(25, 24)
-#define PT_B4	   PT_LO(27, 26)
-#define PT_B5	   PT_HI(27, 26)
-#define PT_B6	   PT_LO(29, 28)
-#define PT_B7	   PT_HI(29, 28)
-#define PT_B8	   PT_LO(31, 30)
-#define PT_B9	   PT_HI(31, 30)
-#define PT_B10	   PT_LO(33, 32)
-#define PT_B11	   PT_HI(33, 32)
-#define PT_B12	   PT_LO(35, 34)
-#define PT_B13	   PT_HI(35, 34)
-#define PT_A16	   PT_LO(37, 36)
-#define PT_A17	   PT_HI(37, 36)
-#define PT_A18	   PT_LO(39, 38)
-#define PT_A19	   PT_HI(39, 38)
-#define PT_A20	   PT_LO(41, 40)
-#define PT_A21	   PT_HI(41, 40)
-#define PT_A22	   PT_LO(43, 42)
-#define PT_A23	   PT_HI(43, 42)
-#define PT_A24	   PT_LO(45, 44)
-#define PT_A25	   PT_HI(45, 44)
-#define PT_A26	   PT_LO(47, 46)
-#define PT_A27	   PT_HI(47, 46)
-#define PT_A28	   PT_LO(49, 48)
-#define PT_A29	   PT_HI(49, 48)
-#define PT_A30	   PT_LO(51, 50)
-#define PT_A31	   PT_HI(51, 50)
-#define PT_A0	   PT_LO(53, 52)
-#define PT_A1	   PT_HI(53, 52)
-#define PT_A2	   PT_LO(55, 54)
-#define PT_A3	   PT_HI(55, 54)
-#define PT_A4	   PT_LO(57, 56)
-#define PT_A5	   PT_HI(57, 56)
-#define PT_A6	   PT_LO(59, 58)
-#define PT_A7	   PT_HI(59, 58)
-#define PT_A8	   PT_LO(61, 60)
-#define PT_A9	   PT_HI(61, 60)
-#define PT_A10	   PT_LO(63, 62)
-#define PT_A11	   PT_HI(63, 62)
-#define PT_A12	   PT_LO(65, 64)
-#define PT_A13	   PT_HI(65, 64)
-#define PT_A14	   PT_LO(67, 66)
-#define PT_A15	   PT_HI(67, 66)
-#define PT_B14	   PT_LO(69, 68)
-#define PT_B15	   PT_HI(69, 68)
-
-#define NR_PTREGS  70
-
-#define PT_DP	   PT_B14  /* Data Segment Pointer (B14) */
-#define PT_SP	   PT_B15  /* Stack Pointer (B15)  */
-
-#define PTRACE_GETFDPIC		31	/* get the ELF fdpic loadmap address */
-
-#define PTRACE_GETFDPIC_EXEC	0	/* [addr] request the executable loadmap */
-#define PTRACE_GETFDPIC_INTERP	1	/* [addr] request the interpreter loadmap */
+#include <uapi/asm/ptrace.h>
 
 #ifndef __ASSEMBLY__
-
 #ifdef _BIG_ENDIAN
-#define REG_PAIR(odd, even) unsigned long odd; unsigned long even
 #else
-#define REG_PAIR(odd, even) unsigned long even; unsigned long odd
 #endif
 
-/*
- * this struct defines the way the registers are stored on the
- * stack during a system call. fields defined with REG_PAIR
- * are saved and restored using double-word memory operations
- * which means the word ordering of the pair depends on endianess.
- */
-struct pt_regs {
-	REG_PAIR(tsr, orig_a4);
-	REG_PAIR(rilc, ilc);
-	REG_PAIR(pc, csr);
-
-	REG_PAIR(b17, b16);
-	REG_PAIR(b19, b18);
-	REG_PAIR(b21, b20);
-	REG_PAIR(b23, b22);
-	REG_PAIR(b25, b24);
-	REG_PAIR(b27, b26);
-	REG_PAIR(b29, b28);
-	REG_PAIR(b31, b30);
-
-	REG_PAIR(b1, b0);
-	REG_PAIR(b3, b2);
-	REG_PAIR(b5, b4);
-	REG_PAIR(b7, b6);
-	REG_PAIR(b9, b8);
-	REG_PAIR(b11, b10);
-	REG_PAIR(b13, b12);
-
-	REG_PAIR(a17, a16);
-	REG_PAIR(a19, a18);
-	REG_PAIR(a21, a20);
-	REG_PAIR(a23, a22);
-	REG_PAIR(a25, a24);
-	REG_PAIR(a27, a26);
-	REG_PAIR(a29, a28);
-	REG_PAIR(a31, a30);
-
-	REG_PAIR(a1, a0);
-	REG_PAIR(a3, a2);
-	REG_PAIR(a5, a4);
-	REG_PAIR(a7, a6);
-	REG_PAIR(a9, a8);
-	REG_PAIR(a11, a10);
-	REG_PAIR(a13, a12);
-
-	REG_PAIR(a15, a14);
-	REG_PAIR(sp, dp);
-};
-
-#ifdef __KERNEL__
-
 #include <linux/linkage.h>
 
 #define user_mode(regs)	((((regs)->tsr) & 0x40) != 0)
@@ -174,6 +31,5 @@
 extern asmlinkage unsigned long syscall_trace_entry(struct pt_regs *regs);
 extern asmlinkage void syscall_trace_exit(struct pt_regs *regs);
 
-#endif /* __KERNEL__ */
 #endif /* __ASSEMBLY__ */
 #endif /* _ASM_C6X_PTRACE_H */
diff --git a/arch/c6x/include/uapi/asm/Kbuild b/arch/c6x/include/uapi/asm/Kbuild
index baebb3d..c312b42 100644
--- a/arch/c6x/include/uapi/asm/Kbuild
+++ b/arch/c6x/include/uapi/asm/Kbuild
@@ -1,3 +1,10 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+header-y += byteorder.h
+header-y += kvm_para.h
+header-y += ptrace.h
+header-y += setup.h
+header-y += sigcontext.h
+header-y += swab.h
+header-y += unistd.h
diff --git a/arch/c6x/include/asm/byteorder.h b/arch/c6x/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/c6x/include/asm/byteorder.h
rename to arch/c6x/include/uapi/asm/byteorder.h
diff --git a/arch/c6x/include/asm/kvm_para.h b/arch/c6x/include/uapi/asm/kvm_para.h
similarity index 100%
rename from arch/c6x/include/asm/kvm_para.h
rename to arch/c6x/include/uapi/asm/kvm_para.h
diff --git a/arch/c6x/include/uapi/asm/ptrace.h b/arch/c6x/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..cc0a4d9
--- /dev/null
+++ b/arch/c6x/include/uapi/asm/ptrace.h
@@ -0,0 +1,163 @@
+/*
+ *  Copyright (C) 2004, 2006, 2009, 2010 Texas Instruments Incorporated
+ *  Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
+ *
+ *  Updated for 2.6.34: Mark Salter <msalter@redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#ifndef _UAPI_ASM_C6X_PTRACE_H
+#define _UAPI_ASM_C6X_PTRACE_H
+
+#define BKPT_OPCODE	0x56454314	/* illegal opcode */
+
+#ifdef _BIG_ENDIAN
+#define PT_LO(odd, even)  odd
+#define PT_HI(odd, even)  even
+#else
+#define PT_LO(odd, even)  even
+#define PT_HI(odd, even)  odd
+#endif
+
+#define PT_A4_ORG  PT_LO(1, 0)
+#define PT_TSR	   PT_HI(1, 0)
+#define PT_ILC	   PT_LO(3, 2)
+#define PT_RILC    PT_HI(3, 2)
+#define PT_CSR	   PT_LO(5, 4)
+#define PT_PC	   PT_HI(5, 4)
+#define PT_B16	   PT_LO(7, 6)
+#define PT_B17	   PT_HI(7, 6)
+#define PT_B18	   PT_LO(9, 8)
+#define PT_B19	   PT_HI(9, 8)
+#define PT_B20	   PT_LO(11, 10)
+#define PT_B21	   PT_HI(11, 10)
+#define PT_B22	   PT_LO(13, 12)
+#define PT_B23	   PT_HI(13, 12)
+#define PT_B24	   PT_LO(15, 14)
+#define PT_B25	   PT_HI(15, 14)
+#define PT_B26	   PT_LO(17, 16)
+#define PT_B27	   PT_HI(17, 16)
+#define PT_B28	   PT_LO(19, 18)
+#define PT_B29	   PT_HI(19, 18)
+#define PT_B30	   PT_LO(21, 20)
+#define PT_B31	   PT_HI(21, 20)
+#define PT_B0	   PT_LO(23, 22)
+#define PT_B1	   PT_HI(23, 22)
+#define PT_B2	   PT_LO(25, 24)
+#define PT_B3	   PT_HI(25, 24)
+#define PT_B4	   PT_LO(27, 26)
+#define PT_B5	   PT_HI(27, 26)
+#define PT_B6	   PT_LO(29, 28)
+#define PT_B7	   PT_HI(29, 28)
+#define PT_B8	   PT_LO(31, 30)
+#define PT_B9	   PT_HI(31, 30)
+#define PT_B10	   PT_LO(33, 32)
+#define PT_B11	   PT_HI(33, 32)
+#define PT_B12	   PT_LO(35, 34)
+#define PT_B13	   PT_HI(35, 34)
+#define PT_A16	   PT_LO(37, 36)
+#define PT_A17	   PT_HI(37, 36)
+#define PT_A18	   PT_LO(39, 38)
+#define PT_A19	   PT_HI(39, 38)
+#define PT_A20	   PT_LO(41, 40)
+#define PT_A21	   PT_HI(41, 40)
+#define PT_A22	   PT_LO(43, 42)
+#define PT_A23	   PT_HI(43, 42)
+#define PT_A24	   PT_LO(45, 44)
+#define PT_A25	   PT_HI(45, 44)
+#define PT_A26	   PT_LO(47, 46)
+#define PT_A27	   PT_HI(47, 46)
+#define PT_A28	   PT_LO(49, 48)
+#define PT_A29	   PT_HI(49, 48)
+#define PT_A30	   PT_LO(51, 50)
+#define PT_A31	   PT_HI(51, 50)
+#define PT_A0	   PT_LO(53, 52)
+#define PT_A1	   PT_HI(53, 52)
+#define PT_A2	   PT_LO(55, 54)
+#define PT_A3	   PT_HI(55, 54)
+#define PT_A4	   PT_LO(57, 56)
+#define PT_A5	   PT_HI(57, 56)
+#define PT_A6	   PT_LO(59, 58)
+#define PT_A7	   PT_HI(59, 58)
+#define PT_A8	   PT_LO(61, 60)
+#define PT_A9	   PT_HI(61, 60)
+#define PT_A10	   PT_LO(63, 62)
+#define PT_A11	   PT_HI(63, 62)
+#define PT_A12	   PT_LO(65, 64)
+#define PT_A13	   PT_HI(65, 64)
+#define PT_A14	   PT_LO(67, 66)
+#define PT_A15	   PT_HI(67, 66)
+#define PT_B14	   PT_LO(69, 68)
+#define PT_B15	   PT_HI(69, 68)
+
+#define NR_PTREGS  70
+
+#define PT_DP	   PT_B14  /* Data Segment Pointer (B14) */
+#define PT_SP	   PT_B15  /* Stack Pointer (B15)  */
+
+#define PTRACE_GETFDPIC		31	/* get the ELF fdpic loadmap address */
+
+#define PTRACE_GETFDPIC_EXEC	0	/* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP	1	/* [addr] request the interpreter loadmap */
+
+#ifndef __ASSEMBLY__
+
+#ifdef _BIG_ENDIAN
+#define REG_PAIR(odd, even) unsigned long odd; unsigned long even
+#else
+#define REG_PAIR(odd, even) unsigned long even; unsigned long odd
+#endif
+
+/*
+ * this struct defines the way the registers are stored on the
+ * stack during a system call. fields defined with REG_PAIR
+ * are saved and restored using double-word memory operations
+ * which means the word ordering of the pair depends on endianess.
+ */
+struct pt_regs {
+	REG_PAIR(tsr, orig_a4);
+	REG_PAIR(rilc, ilc);
+	REG_PAIR(pc, csr);
+
+	REG_PAIR(b17, b16);
+	REG_PAIR(b19, b18);
+	REG_PAIR(b21, b20);
+	REG_PAIR(b23, b22);
+	REG_PAIR(b25, b24);
+	REG_PAIR(b27, b26);
+	REG_PAIR(b29, b28);
+	REG_PAIR(b31, b30);
+
+	REG_PAIR(b1, b0);
+	REG_PAIR(b3, b2);
+	REG_PAIR(b5, b4);
+	REG_PAIR(b7, b6);
+	REG_PAIR(b9, b8);
+	REG_PAIR(b11, b10);
+	REG_PAIR(b13, b12);
+
+	REG_PAIR(a17, a16);
+	REG_PAIR(a19, a18);
+	REG_PAIR(a21, a20);
+	REG_PAIR(a23, a22);
+	REG_PAIR(a25, a24);
+	REG_PAIR(a27, a26);
+	REG_PAIR(a29, a28);
+	REG_PAIR(a31, a30);
+
+	REG_PAIR(a1, a0);
+	REG_PAIR(a3, a2);
+	REG_PAIR(a5, a4);
+	REG_PAIR(a7, a6);
+	REG_PAIR(a9, a8);
+	REG_PAIR(a11, a10);
+	REG_PAIR(a13, a12);
+
+	REG_PAIR(a15, a14);
+	REG_PAIR(sp, dp);
+};
+
+#endif /* __ASSEMBLY__ */
+#endif /* _UAPI_ASM_C6X_PTRACE_H */
diff --git a/arch/c6x/include/asm/setup.h b/arch/c6x/include/uapi/asm/setup.h
similarity index 100%
rename from arch/c6x/include/asm/setup.h
rename to arch/c6x/include/uapi/asm/setup.h
diff --git a/arch/c6x/include/asm/sigcontext.h b/arch/c6x/include/uapi/asm/sigcontext.h
similarity index 100%
rename from arch/c6x/include/asm/sigcontext.h
rename to arch/c6x/include/uapi/asm/sigcontext.h
diff --git a/arch/c6x/include/asm/swab.h b/arch/c6x/include/uapi/asm/swab.h
similarity index 100%
rename from arch/c6x/include/asm/swab.h
rename to arch/c6x/include/uapi/asm/swab.h
diff --git a/arch/c6x/include/asm/unistd.h b/arch/c6x/include/uapi/asm/unistd.h
similarity index 100%
rename from arch/c6x/include/asm/unistd.h
rename to arch/c6x/include/uapi/asm/unistd.h
diff --git a/arch/cris/arch-v10/kernel/process.c b/arch/cris/arch-v10/kernel/process.c
index bee8df4..15ac715 100644
--- a/arch/cris/arch-v10/kernel/process.c
+++ b/arch/cris/arch-v10/kernel/process.c
@@ -212,14 +212,14 @@
 			  struct pt_regs *regs)
 {
 	int error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname(fname);
 	error = PTR_ERR(filename);
 
 	if (IS_ERR(filename))
 	        goto out;
-	error = do_execve(filename, argv, envp, regs);
+	error = do_execve(filename->name, argv, envp, regs);
 	putname(filename);
  out:
 	return error;
diff --git a/arch/cris/arch-v32/kernel/process.c b/arch/cris/arch-v32/kernel/process.c
index 0570e8c..4e99922 100644
--- a/arch/cris/arch-v32/kernel/process.c
+++ b/arch/cris/arch-v32/kernel/process.c
@@ -224,7 +224,7 @@
 	   struct pt_regs *regs)
 {
 	int error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname(fname);
 	error = PTR_ERR(filename);
@@ -232,7 +232,7 @@
 	if (IS_ERR(filename))
 	        goto out;
 
-	error = do_execve(filename, argv, envp, regs);
+	error = do_execve(filename->name, argv, envp, regs);
 	putname(filename);
  out:
 	return error;
diff --git a/arch/frv/include/asm/Kbuild b/arch/frv/include/asm/Kbuild
index 251bd71..4a159da 100644
--- a/arch/frv/include/asm/Kbuild
+++ b/arch/frv/include/asm/Kbuild
@@ -1,6 +1,3 @@
-include include/asm-generic/Kbuild.asm
 
-header-y += registers.h
-header-y += termios.h
 generic-y += clkdev.h
 generic-y += exec.h
diff --git a/arch/frv/include/asm/ptrace.h b/arch/frv/include/asm/ptrace.h
index bd534b2..034f179 100644
--- a/arch/frv/include/asm/ptrace.h
+++ b/arch/frv/include/asm/ptrace.h
@@ -11,58 +11,10 @@
 #ifndef _ASM_PTRACE_H
 #define _ASM_PTRACE_H
 
-#include <asm/registers.h>
-#ifdef __KERNEL__
 #include <asm/irq_regs.h>
+#include <uapi/asm/ptrace.h>
 
 #define in_syscall(regs) (((regs)->tbr & TBR_TT) == TBR_TT_TRAP0)
-#endif
-
-
-#define PT_PSR		0
-#define	PT_ISR		1
-#define PT_CCR		2
-#define PT_CCCR		3
-#define PT_LR		4
-#define PT_LCR		5
-#define PT_PC		6
-
-#define PT__STATUS	7	/* exception status */
-#define PT_SYSCALLNO	8	/* syscall number or -1 */
-#define PT_ORIG_GR8	9	/* saved GR8 for signal handling */
-#define PT_GNER0	10
-#define PT_GNER1	11
-#define PT_IACC0H	12
-#define PT_IACC0L	13
-
-#define PT_GR(j)	( 14 + (j))	/* GRj for 0<=j<=63 */
-#define PT_FR(j)	( 78 + (j))	/* FRj for 0<=j<=63 */
-#define PT_FNER(j)	(142 + (j))	/* FNERj for 0<=j<=1 */
-#define PT_MSR(j)	(144 + (j))	/* MSRj for 0<=j<=2 */
-#define PT_ACC(j)	(146 + (j))	/* ACCj for 0<=j<=7 */
-#define PT_ACCG(jklm)	(154 + (jklm))	/* ACCGjklm for 0<=jklm<=1 (reads four regs per slot) */
-#define PT_FSR(j)	(156 + (j))	/* FSRj for 0<=j<=0 */
-#define PT__GPEND	78
-#define PT__END		157
-
-#define PT_TBR		PT_GR(0)
-#define PT_SP		PT_GR(1)
-#define PT_FP		PT_GR(2)
-#define PT_PREV_FRAME	PT_GR(28)	/* previous exception frame pointer (old gr28 value) */
-#define PT_CURR_TASK	PT_GR(29)	/* current task */
-
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS		12
-#define PTRACE_SETREGS		13
-#define PTRACE_GETFPREGS	14
-#define PTRACE_SETFPREGS	15
-#define PTRACE_GETFDPIC		31	/* get the ELF fdpic loadmap address */
-
-#define PTRACE_GETFDPIC_EXEC	0	/* [addr] request the executable loadmap */
-#define PTRACE_GETFDPIC_INTERP	1	/* [addr] request the interpreter loadmap */
-
-#ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 
 struct task_struct;
@@ -86,5 +38,4 @@
 #define arch_has_single_step()	(1)
 
 #endif /* !__ASSEMBLY__ */
-#endif /* __KERNEL__ */
 #endif /* _ASM_PTRACE_H */
diff --git a/arch/frv/include/asm/setup.h b/arch/frv/include/asm/setup.h
index afd787c..aa76f2e 100644
--- a/arch/frv/include/asm/setup.h
+++ b/arch/frv/include/asm/setup.h
@@ -8,15 +8,12 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-
 #ifndef _ASM_SETUP_H
 #define _ASM_SETUP_H
 
-#define COMMAND_LINE_SIZE       512
-
-#ifdef __KERNEL__
 
 #include <linux/init.h>
+#include <uapi/asm/setup.h>
 
 #ifndef __ASSEMBLY__
 
@@ -26,6 +23,4 @@
 
 #endif /* !__ASSEMBLY__ */
 
-#endif  /*  __KERNEL__  */
-
 #endif /* _ASM_SETUP_H */
diff --git a/arch/frv/include/asm/signal.h b/arch/frv/include/asm/signal.h
index f071e81..599500a 100644
--- a/arch/frv/include/asm/signal.h
+++ b/arch/frv/include/asm/signal.h
@@ -1,21 +1,8 @@
 #ifndef _ASM_SIGNAL_H
 #define _ASM_SIGNAL_H
 
-#include <linux/types.h>
+#include <uapi/asm/signal.h>
 
-#ifndef __KERNEL__
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* !__KERNEL__ */
-
-#define SA_RESTORER	0x04000000 /* to get struct sigaction correct */
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
 struct old_sigaction {
 	__sighandler_t sa_handler;
 	old_sigset_t sa_mask;
@@ -23,22 +10,4 @@
 	__sigrestore_t sa_restorer;
 };
 
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_SIGNAL_H */
diff --git a/arch/frv/include/asm/termios.h b/arch/frv/include/asm/termios.h
index b4868aa..9f753fc 100644
--- a/arch/frv/include/asm/termios.h
+++ b/arch/frv/include/asm/termios.h
@@ -1,27 +1,8 @@
 #ifndef _ASM_TERMIOS_H
 #define _ASM_TERMIOS_H
 
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
+#include <uapi/asm/termios.h>
 
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-#ifdef __KERNEL__
 /*	intr=^C		quit=^|		erase=del	kill=^U
 	eof=^D		vtime=\0	vmin=\1		sxtc=\0
 	start=^Q	stop=^S		susp=^Z		eol=\0
@@ -29,30 +10,5 @@
 	eol2=\0
 */
 #define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-#define TIOCM_MODEM_BITS       TIOCM_OUT2      /* IRDA support */
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
 #include <asm-generic/termios-base.h>
-#endif
-
 #endif /* _ASM_TERMIOS_H */
diff --git a/arch/frv/include/asm/types.h b/arch/frv/include/asm/types.h
index 390a612..6bc6365 100644
--- a/arch/frv/include/asm/types.h
+++ b/arch/frv/include/asm/types.h
@@ -8,19 +8,15 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-
 #ifndef _ASM_TYPES_H
 #define _ASM_TYPES_H
 
-#include <asm-generic/int-ll64.h>
+#include <uapi/asm/types.h>
 
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
-#ifdef __KERNEL__
 
 #define BITS_PER_LONG 32
 
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_TYPES_H */
diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h
index b6b07e5..266a5b2 100644
--- a/arch/frv/include/asm/unistd.h
+++ b/arch/frv/include/asm/unistd.h
@@ -1,351 +1,8 @@
 #ifndef _ASM_UNISTD_H_
 #define _ASM_UNISTD_H_
 
-/*
- * This file contains the system call numbers.
- */
+#include <uapi/asm/unistd.h>
 
-#define __NR_restart_syscall      0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_lchown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-// #define __NR_oldolduname	 /* 59 */ obsolete
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-// #define __NR_mmap		 90	/* obsolete - not implemented */
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-// #define __NR_profil		 /* 98 */ obsolete
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-// #define __NR_ioperm		/* 101 */ not supported
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-// #define __NR_olduname		/* 109 */ obsolete
-// #define __NR_iopl		/* 110 */ not supported
-#define __NR_vhangup		111
-// #define __NR_idle		/* 112 */ Obsolete
-// #define __NR_vm86old		/* 113 */ not supported
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-// #define __NR_modify_ldt	/* 123 */ not supported
-#define __NR_cacheflush		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-// #define __NR_vm86		/* 166 */ not supported
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl		172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_chown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_lchown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_chown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_mincore		218
-#define __NR_madvise		219
-
-#define __NR_getdents64		220
-#define __NR_fcntl64		221
-#define __NR_security		223	/* syscall for security modules */
-#define __NR_gettid		224
-#define __NR_readahead		225
-#define __NR_setxattr		226
-#define __NR_lsetxattr		227
-#define __NR_fsetxattr		228
-#define __NR_getxattr		229
-#define __NR_lgetxattr		230
-#define __NR_fgetxattr		231
-#define __NR_listxattr		232
-#define __NR_llistxattr		233
-#define __NR_flistxattr		234
-#define __NR_removexattr	235
-#define __NR_lremovexattr	236
-#define __NR_fremovexattr	237
-#define __NR_tkill		238
-#define __NR_sendfile64		239
-#define __NR_futex		240
-#define __NR_sched_setaffinity	241
-#define __NR_sched_getaffinity	242
-#define __NR_set_thread_area	243
-#define __NR_get_thread_area	244
-#define __NR_io_setup		245
-#define __NR_io_destroy		246
-#define __NR_io_getevents	247
-#define __NR_io_submit		248
-#define __NR_io_cancel		249
-#define __NR_fadvise64		250
-
-#define __NR_exit_group		252
-#define __NR_lookup_dcookie	253
-#define __NR_epoll_create	254
-#define __NR_epoll_ctl		255
-#define __NR_epoll_wait		256
-#define __NR_remap_file_pages	257
-#define __NR_set_tid_address	258
-#define __NR_timer_create	259
-#define __NR_timer_settime	(__NR_timer_create+1)
-#define __NR_timer_gettime	(__NR_timer_create+2)
-#define __NR_timer_getoverrun	(__NR_timer_create+3)
-#define __NR_timer_delete	(__NR_timer_create+4)
-#define __NR_clock_settime	(__NR_timer_create+5)
-#define __NR_clock_gettime	(__NR_timer_create+6)
-#define __NR_clock_getres	(__NR_timer_create+7)
-#define __NR_clock_nanosleep	(__NR_timer_create+8)
-#define __NR_statfs64		268
-#define __NR_fstatfs64		269
-#define __NR_tgkill		270
-#define __NR_utimes		271
-#define __NR_fadvise64_64	272
-#define __NR_vserver		273
-#define __NR_mbind		274
-#define __NR_get_mempolicy	275
-#define __NR_set_mempolicy	276
-#define __NR_mq_open 		277
-#define __NR_mq_unlink		(__NR_mq_open+1)
-#define __NR_mq_timedsend	(__NR_mq_open+2)
-#define __NR_mq_timedreceive	(__NR_mq_open+3)
-#define __NR_mq_notify		(__NR_mq_open+4)
-#define __NR_mq_getsetattr	(__NR_mq_open+5)
-#define __NR_kexec_load		283
-#define __NR_waitid		284
-/* #define __NR_sys_setaltroot	285 */
-#define __NR_add_key		286
-#define __NR_request_key	287
-#define __NR_keyctl		288
-#define __NR_ioprio_set		289
-#define __NR_ioprio_get		290
-#define __NR_inotify_init	291
-#define __NR_inotify_add_watch	292
-#define __NR_inotify_rm_watch	293
-#define __NR_migrate_pages	294
-#define __NR_openat		295
-#define __NR_mkdirat		296
-#define __NR_mknodat		297
-#define __NR_fchownat		298
-#define __NR_futimesat		299
-#define __NR_fstatat64		300
-#define __NR_unlinkat		301
-#define __NR_renameat		302
-#define __NR_linkat		303
-#define __NR_symlinkat		304
-#define __NR_readlinkat		305
-#define __NR_fchmodat		306
-#define __NR_faccessat		307
-#define __NR_pselect6		308
-#define __NR_ppoll		309
-#define __NR_unshare		310
-#define __NR_set_robust_list	311
-#define __NR_get_robust_list	312
-#define __NR_splice		313
-#define __NR_sync_file_range	314
-#define __NR_tee		315
-#define __NR_vmsplice		316
-#define __NR_move_pages		317
-#define __NR_getcpu		318
-#define __NR_epoll_pwait	319
-#define __NR_utimensat		320
-#define __NR_signalfd		321
-#define __NR_timerfd_create	322
-#define __NR_eventfd		323
-#define __NR_fallocate		324
-#define __NR_timerfd_settime	325
-#define __NR_timerfd_gettime	326
-#define __NR_signalfd4		327
-#define __NR_eventfd2		328
-#define __NR_epoll_create1	329
-#define __NR_dup3		330
-#define __NR_pipe2		331
-#define __NR_inotify_init1	332
-#define __NR_preadv		333
-#define __NR_pwritev		334
-#define __NR_rt_tgsigqueueinfo	335
-#define __NR_perf_event_open	336
-#define __NR_setns		337
-
-#ifdef __KERNEL__
 
 #define NR_syscalls 338
 
@@ -385,5 +42,4 @@
 #define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
 #endif
 
-#endif /* __KERNEL__ */
 #endif /* _ASM_UNISTD_H_ */
diff --git a/arch/frv/include/uapi/asm/Kbuild b/arch/frv/include/uapi/asm/Kbuild
index baebb3d..42a2b33 100644
--- a/arch/frv/include/uapi/asm/Kbuild
+++ b/arch/frv/include/uapi/asm/Kbuild
@@ -1,3 +1,35 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += byteorder.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += kvm_para.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += param.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ptrace.h
+header-y += registers.h
+header-y += resource.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += unistd.h
diff --git a/arch/frv/include/asm/auxvec.h b/arch/frv/include/uapi/asm/auxvec.h
similarity index 100%
rename from arch/frv/include/asm/auxvec.h
rename to arch/frv/include/uapi/asm/auxvec.h
diff --git a/arch/frv/include/asm/bitsperlong.h b/arch/frv/include/uapi/asm/bitsperlong.h
similarity index 100%
rename from arch/frv/include/asm/bitsperlong.h
rename to arch/frv/include/uapi/asm/bitsperlong.h
diff --git a/arch/frv/include/asm/byteorder.h b/arch/frv/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/frv/include/asm/byteorder.h
rename to arch/frv/include/uapi/asm/byteorder.h
diff --git a/arch/frv/include/asm/errno.h b/arch/frv/include/uapi/asm/errno.h
similarity index 100%
rename from arch/frv/include/asm/errno.h
rename to arch/frv/include/uapi/asm/errno.h
diff --git a/arch/frv/include/asm/fcntl.h b/arch/frv/include/uapi/asm/fcntl.h
similarity index 100%
rename from arch/frv/include/asm/fcntl.h
rename to arch/frv/include/uapi/asm/fcntl.h
diff --git a/arch/frv/include/asm/ioctl.h b/arch/frv/include/uapi/asm/ioctl.h
similarity index 100%
rename from arch/frv/include/asm/ioctl.h
rename to arch/frv/include/uapi/asm/ioctl.h
diff --git a/arch/frv/include/asm/ioctls.h b/arch/frv/include/uapi/asm/ioctls.h
similarity index 100%
rename from arch/frv/include/asm/ioctls.h
rename to arch/frv/include/uapi/asm/ioctls.h
diff --git a/arch/frv/include/asm/ipcbuf.h b/arch/frv/include/uapi/asm/ipcbuf.h
similarity index 100%
rename from arch/frv/include/asm/ipcbuf.h
rename to arch/frv/include/uapi/asm/ipcbuf.h
diff --git a/arch/frv/include/asm/kvm_para.h b/arch/frv/include/uapi/asm/kvm_para.h
similarity index 100%
rename from arch/frv/include/asm/kvm_para.h
rename to arch/frv/include/uapi/asm/kvm_para.h
diff --git a/arch/frv/include/asm/mman.h b/arch/frv/include/uapi/asm/mman.h
similarity index 100%
rename from arch/frv/include/asm/mman.h
rename to arch/frv/include/uapi/asm/mman.h
diff --git a/arch/frv/include/asm/msgbuf.h b/arch/frv/include/uapi/asm/msgbuf.h
similarity index 100%
rename from arch/frv/include/asm/msgbuf.h
rename to arch/frv/include/uapi/asm/msgbuf.h
diff --git a/arch/frv/include/asm/param.h b/arch/frv/include/uapi/asm/param.h
similarity index 100%
rename from arch/frv/include/asm/param.h
rename to arch/frv/include/uapi/asm/param.h
diff --git a/arch/frv/include/asm/poll.h b/arch/frv/include/uapi/asm/poll.h
similarity index 100%
rename from arch/frv/include/asm/poll.h
rename to arch/frv/include/uapi/asm/poll.h
diff --git a/arch/frv/include/asm/posix_types.h b/arch/frv/include/uapi/asm/posix_types.h
similarity index 100%
rename from arch/frv/include/asm/posix_types.h
rename to arch/frv/include/uapi/asm/posix_types.h
diff --git a/arch/frv/include/uapi/asm/ptrace.h b/arch/frv/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..3887e493
--- /dev/null
+++ b/arch/frv/include/uapi/asm/ptrace.h
@@ -0,0 +1,60 @@
+/* ptrace.h: ptrace() relevant definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_ASM_PTRACE_H
+#define _UAPI_ASM_PTRACE_H
+
+#include <asm/registers.h>
+
+
+#define PT_PSR		0
+#define	PT_ISR		1
+#define PT_CCR		2
+#define PT_CCCR		3
+#define PT_LR		4
+#define PT_LCR		5
+#define PT_PC		6
+
+#define PT__STATUS	7	/* exception status */
+#define PT_SYSCALLNO	8	/* syscall number or -1 */
+#define PT_ORIG_GR8	9	/* saved GR8 for signal handling */
+#define PT_GNER0	10
+#define PT_GNER1	11
+#define PT_IACC0H	12
+#define PT_IACC0L	13
+
+#define PT_GR(j)	( 14 + (j))	/* GRj for 0<=j<=63 */
+#define PT_FR(j)	( 78 + (j))	/* FRj for 0<=j<=63 */
+#define PT_FNER(j)	(142 + (j))	/* FNERj for 0<=j<=1 */
+#define PT_MSR(j)	(144 + (j))	/* MSRj for 0<=j<=2 */
+#define PT_ACC(j)	(146 + (j))	/* ACCj for 0<=j<=7 */
+#define PT_ACCG(jklm)	(154 + (jklm))	/* ACCGjklm for 0<=jklm<=1 (reads four regs per slot) */
+#define PT_FSR(j)	(156 + (j))	/* FSRj for 0<=j<=0 */
+#define PT__GPEND	78
+#define PT__END		157
+
+#define PT_TBR		PT_GR(0)
+#define PT_SP		PT_GR(1)
+#define PT_FP		PT_GR(2)
+#define PT_PREV_FRAME	PT_GR(28)	/* previous exception frame pointer (old gr28 value) */
+#define PT_CURR_TASK	PT_GR(29)	/* current task */
+
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+#define PTRACE_GETFDPIC		31	/* get the ELF fdpic loadmap address */
+
+#define PTRACE_GETFDPIC_EXEC	0	/* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP	1	/* [addr] request the interpreter loadmap */
+
+#endif /* _UAPI_ASM_PTRACE_H */
diff --git a/arch/frv/include/asm/registers.h b/arch/frv/include/uapi/asm/registers.h
similarity index 100%
rename from arch/frv/include/asm/registers.h
rename to arch/frv/include/uapi/asm/registers.h
diff --git a/arch/frv/include/asm/resource.h b/arch/frv/include/uapi/asm/resource.h
similarity index 100%
rename from arch/frv/include/asm/resource.h
rename to arch/frv/include/uapi/asm/resource.h
diff --git a/arch/frv/include/asm/sembuf.h b/arch/frv/include/uapi/asm/sembuf.h
similarity index 100%
rename from arch/frv/include/asm/sembuf.h
rename to arch/frv/include/uapi/asm/sembuf.h
diff --git a/arch/frv/include/uapi/asm/setup.h b/arch/frv/include/uapi/asm/setup.h
new file mode 100644
index 0000000..fbf3fc9
--- /dev/null
+++ b/arch/frv/include/uapi/asm/setup.h
@@ -0,0 +1,18 @@
+/* setup.h: setup stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_ASM_SETUP_H
+#define _UAPI_ASM_SETUP_H
+
+#define COMMAND_LINE_SIZE       512
+
+
+#endif /* _UAPI_ASM_SETUP_H */
diff --git a/arch/frv/include/asm/shmbuf.h b/arch/frv/include/uapi/asm/shmbuf.h
similarity index 100%
rename from arch/frv/include/asm/shmbuf.h
rename to arch/frv/include/uapi/asm/shmbuf.h
diff --git a/arch/frv/include/asm/sigcontext.h b/arch/frv/include/uapi/asm/sigcontext.h
similarity index 100%
rename from arch/frv/include/asm/sigcontext.h
rename to arch/frv/include/uapi/asm/sigcontext.h
diff --git a/arch/frv/include/asm/siginfo.h b/arch/frv/include/uapi/asm/siginfo.h
similarity index 100%
rename from arch/frv/include/asm/siginfo.h
rename to arch/frv/include/uapi/asm/siginfo.h
diff --git a/arch/frv/include/uapi/asm/signal.h b/arch/frv/include/uapi/asm/signal.h
new file mode 100644
index 0000000..bf3b162
--- /dev/null
+++ b/arch/frv/include/uapi/asm/signal.h
@@ -0,0 +1,36 @@
+#ifndef _UAPI_ASM_SIGNAL_H
+#define _UAPI_ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* !__KERNEL__ */
+
+#define SA_RESTORER	0x04000000 /* to get struct sigaction correct */
+
+#include <asm-generic/signal.h>
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+#endif /* _UAPI_ASM_SIGNAL_H */
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/uapi/asm/socket.h
similarity index 100%
rename from arch/frv/include/asm/socket.h
rename to arch/frv/include/uapi/asm/socket.h
diff --git a/arch/frv/include/asm/sockios.h b/arch/frv/include/uapi/asm/sockios.h
similarity index 100%
rename from arch/frv/include/asm/sockios.h
rename to arch/frv/include/uapi/asm/sockios.h
diff --git a/arch/frv/include/asm/stat.h b/arch/frv/include/uapi/asm/stat.h
similarity index 100%
rename from arch/frv/include/asm/stat.h
rename to arch/frv/include/uapi/asm/stat.h
diff --git a/arch/frv/include/asm/statfs.h b/arch/frv/include/uapi/asm/statfs.h
similarity index 100%
rename from arch/frv/include/asm/statfs.h
rename to arch/frv/include/uapi/asm/statfs.h
diff --git a/arch/frv/include/asm/swab.h b/arch/frv/include/uapi/asm/swab.h
similarity index 100%
rename from arch/frv/include/asm/swab.h
rename to arch/frv/include/uapi/asm/swab.h
diff --git a/arch/frv/include/asm/termbits.h b/arch/frv/include/uapi/asm/termbits.h
similarity index 100%
rename from arch/frv/include/asm/termbits.h
rename to arch/frv/include/uapi/asm/termbits.h
diff --git a/arch/frv/include/uapi/asm/termios.h b/arch/frv/include/uapi/asm/termios.h
new file mode 100644
index 0000000..edcc08a
--- /dev/null
+++ b/arch/frv/include/uapi/asm/termios.h
@@ -0,0 +1,46 @@
+#ifndef _UAPI_ASM_TERMIOS_H
+#define _UAPI_ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+#define TIOCM_MODEM_BITS       TIOCM_OUT2      /* IRDA support */
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+
+#endif /* _UAPI_ASM_TERMIOS_H */
diff --git a/arch/frv/include/uapi/asm/types.h b/arch/frv/include/uapi/asm/types.h
new file mode 100644
index 0000000..cf23149
--- /dev/null
+++ b/arch/frv/include/uapi/asm/types.h
@@ -0,0 +1,11 @@
+/* types.h: FRV types
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm-generic/int-ll64.h>
diff --git a/arch/frv/include/uapi/asm/unistd.h b/arch/frv/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..9e2612f
--- /dev/null
+++ b/arch/frv/include/uapi/asm/unistd.h
@@ -0,0 +1,348 @@
+#ifndef _UAPI_ASM_UNISTD_H_
+#define _UAPI_ASM_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+// #define __NR_oldolduname	 /* 59 */ obsolete
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+// #define __NR_mmap		 90	/* obsolete - not implemented */
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+// #define __NR_profil		 /* 98 */ obsolete
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+// #define __NR_ioperm		/* 101 */ not supported
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+// #define __NR_olduname		/* 109 */ obsolete
+// #define __NR_iopl		/* 110 */ not supported
+#define __NR_vhangup		111
+// #define __NR_idle		/* 112 */ Obsolete
+// #define __NR_vm86old		/* 113 */ not supported
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+// #define __NR_modify_ldt	/* 123 */ not supported
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+// #define __NR_vm86		/* 166 */ not supported
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+#define __NR_security		223	/* syscall for security modules */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind		274
+#define __NR_get_mempolicy	275
+#define __NR_set_mempolicy	276
+#define __NR_mq_open 		277
+#define __NR_mq_unlink		(__NR_mq_open+1)
+#define __NR_mq_timedsend	(__NR_mq_open+2)
+#define __NR_mq_timedreceive	(__NR_mq_open+3)
+#define __NR_mq_notify		(__NR_mq_open+4)
+#define __NR_mq_getsetattr	(__NR_mq_open+5)
+#define __NR_kexec_load		283
+#define __NR_waitid		284
+/* #define __NR_sys_setaltroot	285 */
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+#define __NR_ioprio_set		289
+#define __NR_ioprio_get		290
+#define __NR_inotify_init	291
+#define __NR_inotify_add_watch	292
+#define __NR_inotify_rm_watch	293
+#define __NR_migrate_pages	294
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+#define __NR_set_robust_list	311
+#define __NR_get_robust_list	312
+#define __NR_splice		313
+#define __NR_sync_file_range	314
+#define __NR_tee		315
+#define __NR_vmsplice		316
+#define __NR_move_pages		317
+#define __NR_getcpu		318
+#define __NR_epoll_pwait	319
+#define __NR_utimensat		320
+#define __NR_signalfd		321
+#define __NR_timerfd_create	322
+#define __NR_eventfd		323
+#define __NR_fallocate		324
+#define __NR_timerfd_settime	325
+#define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+#define __NR_preadv		333
+#define __NR_pwritev		334
+#define __NR_rt_tgsigqueueinfo	335
+#define __NR_perf_event_open	336
+#define __NR_setns		337
+
+#endif /* _UAPI_ASM_UNISTD_H_ */
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index f153ed1..e8dc139 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -217,14 +217,14 @@
 			  int dummy, ...)
 {
 	int error;
-	char * filename;
+	struct filename *filename;
 	struct pt_regs *regs = (struct pt_regs *) ((unsigned char *)&dummy-4);
 
 	filename = getname(name);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		return error;
-	error = do_execve(filename, argv, envp, regs);
+	error = do_execve(filename->name, argv, envp, regs);
 	putname(filename);
 	return error;
 }
diff --git a/arch/hexagon/kernel/syscall.c b/arch/hexagon/kernel/syscall.c
index 553cd60..25a9bfe 100644
--- a/arch/hexagon/kernel/syscall.c
+++ b/arch/hexagon/kernel/syscall.c
@@ -40,7 +40,7 @@
 			  const char __user *const __user *envp)
 {
 	struct pt_regs *pregs = current_thread_info()->regs;
-	char *filename;
+	struct filename *filename;
 	int retval;
 
 	filename = getname(ufilename);
@@ -48,7 +48,7 @@
 	if (IS_ERR(filename))
 		return retval;
 
-	retval = do_execve(filename, argv, envp, pregs);
+	retval = do_execve(filename->name, argv, envp, pregs);
 	putname(filename);
 
 	return retval;
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 3c720ef..4c10e60 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -39,7 +39,7 @@
 	select ARCH_TASK_STRUCT_ALLOCATOR
 	select ARCH_THREAD_INFO_ALLOCATOR
 	select ARCH_CLOCKSOURCE_DATA
-	select GENERIC_TIME_VSYSCALL
+	select GENERIC_TIME_VSYSCALL_OLD
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
index 562f593..4a159da 100644
--- a/arch/ia64/include/asm/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
@@ -1,17 +1,3 @@
-include include/asm-generic/Kbuild.asm
 
-header-y += break.h
-header-y += cmpxchg.h
-header-y += fpu.h
-header-y += gcc_intrin.h
-header-y += ia64regs.h
-header-y += intel_intrin.h
-header-y += intrinsics.h
-header-y += perfmon.h
-header-y += perfmon_default_smpl.h
-header-y += ptrace_offsets.h
-header-y += rse.h
-header-y += ucontext.h
-header-y += ustack.h
 generic-y += clkdev.h
 generic-y += exec.h
diff --git a/arch/ia64/include/asm/gcc_intrin.h b/arch/ia64/include/asm/gcc_intrin.h
index 21ddee5..f9495b1 100644
--- a/arch/ia64/include/asm/gcc_intrin.h
+++ b/arch/ia64/include/asm/gcc_intrin.h
@@ -1,621 +1,12 @@
-#ifndef _ASM_IA64_GCC_INTRIN_H
-#define _ASM_IA64_GCC_INTRIN_H
 /*
  *
  * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
  * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
  */
+#ifndef _ASM_IA64_GCC_INTRIN_H
+#define _ASM_IA64_GCC_INTRIN_H
 
-#include <linux/types.h>
-#include <linux/compiler.h>
+#include <uapi/asm/gcc_intrin.h>
 
-/* define this macro to get some asm stmts included in 'c' files */
-#define ASM_SUPPORTED
-
-/* Optimization barrier */
-/* The "volatile" is due to gcc bugs */
-#define ia64_barrier()	asm volatile ("":::"memory")
-
-#define ia64_stop()	asm volatile (";;"::)
-
-#define ia64_invala_gr(regnum)	asm volatile ("invala.e r%0" :: "i"(regnum))
-
-#define ia64_invala_fr(regnum)	asm volatile ("invala.e f%0" :: "i"(regnum))
-
-#define ia64_flushrs() asm volatile ("flushrs;;":::"memory")
-
-#define ia64_loadrs() asm volatile ("loadrs;;":::"memory")
-
-extern void ia64_bad_param_for_setreg (void);
-extern void ia64_bad_param_for_getreg (void);
-
-#ifdef __KERNEL__
 register unsigned long ia64_r13 asm ("r13") __used;
-#endif
-
-#define ia64_native_setreg(regnum, val)						\
-({										\
-	switch (regnum) {							\
-	    case _IA64_REG_PSR_L:						\
-		    asm volatile ("mov psr.l=%0" :: "r"(val) : "memory");	\
-		    break;							\
-	    case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
-		    asm volatile ("mov ar%0=%1" ::				\
-		    			  "i" (regnum - _IA64_REG_AR_KR0),	\
-					  "r"(val): "memory");			\
-		    break;							\
-	    case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:			\
-		    asm volatile ("mov cr%0=%1" ::				\
-				          "i" (regnum - _IA64_REG_CR_DCR),	\
-					  "r"(val): "memory" );			\
-		    break;							\
-	    case _IA64_REG_SP:							\
-		    asm volatile ("mov r12=%0" ::				\
-			    		  "r"(val): "memory");			\
-		    break;							\
-	    case _IA64_REG_GP:							\
-		    asm volatile ("mov gp=%0" :: "r"(val) : "memory");		\
-		break;								\
-	    default:								\
-		    ia64_bad_param_for_setreg();				\
-		    break;							\
-	}									\
-})
-
-#define ia64_native_getreg(regnum)						\
-({										\
-	__u64 ia64_intri_res;							\
-										\
-	switch (regnum) {							\
-	case _IA64_REG_GP:							\
-		asm volatile ("mov %0=gp" : "=r"(ia64_intri_res));		\
-		break;								\
-	case _IA64_REG_IP:							\
-		asm volatile ("mov %0=ip" : "=r"(ia64_intri_res));		\
-		break;								\
-	case _IA64_REG_PSR:							\
-		asm volatile ("mov %0=psr" : "=r"(ia64_intri_res));		\
-		break;								\
-	case _IA64_REG_TP:	/* for current() */				\
-		ia64_intri_res = ia64_r13;					\
-		break;								\
-	case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
-		asm volatile ("mov %0=ar%1" : "=r" (ia64_intri_res)		\
-				      : "i"(regnum - _IA64_REG_AR_KR0));	\
-		break;								\
-	case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:				\
-		asm volatile ("mov %0=cr%1" : "=r" (ia64_intri_res)		\
-				      : "i" (regnum - _IA64_REG_CR_DCR));	\
-		break;								\
-	case _IA64_REG_SP:							\
-		asm volatile ("mov %0=sp" : "=r" (ia64_intri_res));		\
-		break;								\
-	default:								\
-		ia64_bad_param_for_getreg();					\
-		break;								\
-	}									\
-	ia64_intri_res;								\
-})
-
-#define ia64_hint_pause 0
-
-#define ia64_hint(mode)						\
-({								\
-	switch (mode) {						\
-	case ia64_hint_pause:					\
-		asm volatile ("hint @pause" ::: "memory");	\
-		break;						\
-	}							\
-})
-
-
-/* Integer values for mux1 instruction */
-#define ia64_mux1_brcst 0
-#define ia64_mux1_mix   8
-#define ia64_mux1_shuf  9
-#define ia64_mux1_alt  10
-#define ia64_mux1_rev  11
-
-#define ia64_mux1(x, mode)							\
-({										\
-	__u64 ia64_intri_res;							\
-										\
-	switch (mode) {								\
-	case ia64_mux1_brcst:							\
-		asm ("mux1 %0=%1,@brcst" : "=r" (ia64_intri_res) : "r" (x));	\
-		break;								\
-	case ia64_mux1_mix:							\
-		asm ("mux1 %0=%1,@mix" : "=r" (ia64_intri_res) : "r" (x));	\
-		break;								\
-	case ia64_mux1_shuf:							\
-		asm ("mux1 %0=%1,@shuf" : "=r" (ia64_intri_res) : "r" (x));	\
-		break;								\
-	case ia64_mux1_alt:							\
-		asm ("mux1 %0=%1,@alt" : "=r" (ia64_intri_res) : "r" (x));	\
-		break;								\
-	case ia64_mux1_rev:							\
-		asm ("mux1 %0=%1,@rev" : "=r" (ia64_intri_res) : "r" (x));	\
-		break;								\
-	}									\
-	ia64_intri_res;								\
-})
-
-#if __GNUC__ >= 4 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
-# define ia64_popcnt(x)		__builtin_popcountl(x)
-#else
-# define ia64_popcnt(x)						\
-  ({								\
-	__u64 ia64_intri_res;					\
-	asm ("popcnt %0=%1" : "=r" (ia64_intri_res) : "r" (x));	\
-								\
-	ia64_intri_res;						\
-  })
-#endif
-
-#define ia64_getf_exp(x)					\
-({								\
-	long ia64_intri_res;					\
-								\
-	asm ("getf.exp %0=%1" : "=r"(ia64_intri_res) : "f"(x));	\
-								\
-	ia64_intri_res;						\
-})
-
-#define ia64_shrp(a, b, count)								\
-({											\
-	__u64 ia64_intri_res;								\
-	asm ("shrp %0=%1,%2,%3" : "=r"(ia64_intri_res) : "r"(a), "r"(b), "i"(count));	\
-	ia64_intri_res;									\
-})
-
-#define ia64_ldfs(regnum, x)					\
-({								\
-	register double __f__ asm ("f"#regnum);			\
-	asm volatile ("ldfs %0=[%1]" :"=f"(__f__): "r"(x));	\
-})
-
-#define ia64_ldfd(regnum, x)					\
-({								\
-	register double __f__ asm ("f"#regnum);			\
-	asm volatile ("ldfd %0=[%1]" :"=f"(__f__): "r"(x));	\
-})
-
-#define ia64_ldfe(regnum, x)					\
-({								\
-	register double __f__ asm ("f"#regnum);			\
-	asm volatile ("ldfe %0=[%1]" :"=f"(__f__): "r"(x));	\
-})
-
-#define ia64_ldf8(regnum, x)					\
-({								\
-	register double __f__ asm ("f"#regnum);			\
-	asm volatile ("ldf8 %0=[%1]" :"=f"(__f__): "r"(x));	\
-})
-
-#define ia64_ldf_fill(regnum, x)				\
-({								\
-	register double __f__ asm ("f"#regnum);			\
-	asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x));	\
-})
-
-#define ia64_st4_rel_nta(m, val)					\
-({									\
-	asm volatile ("st4.rel.nta [%0] = %1\n\t" :: "r"(m), "r"(val));	\
-})
-
-#define ia64_stfs(x, regnum)						\
-({									\
-	register double __f__ asm ("f"#regnum);				\
-	asm volatile ("stfs [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
-})
-
-#define ia64_stfd(x, regnum)						\
-({									\
-	register double __f__ asm ("f"#regnum);				\
-	asm volatile ("stfd [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
-})
-
-#define ia64_stfe(x, regnum)						\
-({									\
-	register double __f__ asm ("f"#regnum);				\
-	asm volatile ("stfe [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
-})
-
-#define ia64_stf8(x, regnum)						\
-({									\
-	register double __f__ asm ("f"#regnum);				\
-	asm volatile ("stf8 [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
-})
-
-#define ia64_stf_spill(x, regnum)						\
-({										\
-	register double __f__ asm ("f"#regnum);					\
-	asm volatile ("stf.spill [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
-})
-
-#define ia64_fetchadd4_acq(p, inc)						\
-({										\
-										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("fetchadd4.acq %0=[%1],%2"				\
-				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
-				: "memory");					\
-										\
-	ia64_intri_res;								\
-})
-
-#define ia64_fetchadd4_rel(p, inc)						\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("fetchadd4.rel %0=[%1],%2"				\
-				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
-				: "memory");					\
-										\
-	ia64_intri_res;								\
-})
-
-#define ia64_fetchadd8_acq(p, inc)						\
-({										\
-										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("fetchadd8.acq %0=[%1],%2"				\
-				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
-				: "memory");					\
-										\
-	ia64_intri_res;								\
-})
-
-#define ia64_fetchadd8_rel(p, inc)						\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("fetchadd8.rel %0=[%1],%2"				\
-				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
-				: "memory");					\
-										\
-	ia64_intri_res;								\
-})
-
-#define ia64_xchg1(ptr,x)							\
-({										\
-	__u64 ia64_intri_res;							\
-	asm volatile ("xchg1 %0=[%1],%2"					\
-		      : "=r" (ia64_intri_res) : "r" (ptr), "r" (x) : "memory");	\
-	ia64_intri_res;								\
-})
-
-#define ia64_xchg2(ptr,x)						\
-({									\
-	__u64 ia64_intri_res;						\
-	asm volatile ("xchg2 %0=[%1],%2" : "=r" (ia64_intri_res)	\
-		      : "r" (ptr), "r" (x) : "memory");			\
-	ia64_intri_res;							\
-})
-
-#define ia64_xchg4(ptr,x)						\
-({									\
-	__u64 ia64_intri_res;						\
-	asm volatile ("xchg4 %0=[%1],%2" : "=r" (ia64_intri_res)	\
-		      : "r" (ptr), "r" (x) : "memory");			\
-	ia64_intri_res;							\
-})
-
-#define ia64_xchg8(ptr,x)						\
-({									\
-	__u64 ia64_intri_res;						\
-	asm volatile ("xchg8 %0=[%1],%2" : "=r" (ia64_intri_res)	\
-		      : "r" (ptr), "r" (x) : "memory");			\
-	ia64_intri_res;							\
-})
-
-#define ia64_cmpxchg1_acq(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-	asm volatile ("cmpxchg1.acq %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg1_rel(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-	asm volatile ("cmpxchg1.rel %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg2_acq(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-	asm volatile ("cmpxchg2.acq %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg2_rel(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-											\
-	asm volatile ("cmpxchg2.rel %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg4_acq(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-	asm volatile ("cmpxchg4.acq %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg4_rel(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-	asm volatile ("cmpxchg4.rel %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg8_acq(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-	asm volatile ("cmpxchg8.acq %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_cmpxchg8_rel(ptr, new, old)						\
-({											\
-	__u64 ia64_intri_res;								\
-	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
-											\
-	asm volatile ("cmpxchg8.rel %0=[%1],%2,ar.ccv":					\
-			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
-	ia64_intri_res;									\
-})
-
-#define ia64_mf()	asm volatile ("mf" ::: "memory")
-#define ia64_mfa()	asm volatile ("mf.a" ::: "memory")
-
-#define ia64_invala() asm volatile ("invala" ::: "memory")
-
-#define ia64_native_thash(addr)							\
-({										\
-	unsigned long ia64_intri_res;						\
-	asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr));	\
-	ia64_intri_res;								\
-})
-
-#define ia64_srlz_i()	asm volatile (";; srlz.i ;;" ::: "memory")
-#define ia64_srlz_d()	asm volatile (";; srlz.d" ::: "memory");
-
-#ifdef HAVE_SERIALIZE_DIRECTIVE
-# define ia64_dv_serialize_data()		asm volatile (".serialize.data");
-# define ia64_dv_serialize_instruction()	asm volatile (".serialize.instruction");
-#else
-# define ia64_dv_serialize_data()
-# define ia64_dv_serialize_instruction()
-#endif
-
-#define ia64_nop(x)	asm volatile ("nop %0"::"i"(x));
-
-#define ia64_itci(addr)	asm volatile ("itc.i %0;;" :: "r"(addr) : "memory")
-
-#define ia64_itcd(addr)	asm volatile ("itc.d %0;;" :: "r"(addr) : "memory")
-
-
-#define ia64_itri(trnum, addr) asm volatile ("itr.i itr[%0]=%1"				\
-					     :: "r"(trnum), "r"(addr) : "memory")
-
-#define ia64_itrd(trnum, addr) asm volatile ("itr.d dtr[%0]=%1"				\
-					     :: "r"(trnum), "r"(addr) : "memory")
-
-#define ia64_tpa(addr)								\
-({										\
-	unsigned long ia64_pa;							\
-	asm volatile ("tpa %0 = %1" : "=r"(ia64_pa) : "r"(addr) : "memory");	\
-	ia64_pa;								\
-})
-
-#define __ia64_set_dbr(index, val)						\
-	asm volatile ("mov dbr[%0]=%1" :: "r"(index), "r"(val) : "memory")
-
-#define ia64_set_ibr(index, val)						\
-	asm volatile ("mov ibr[%0]=%1" :: "r"(index), "r"(val) : "memory")
-
-#define ia64_set_pkr(index, val)						\
-	asm volatile ("mov pkr[%0]=%1" :: "r"(index), "r"(val) : "memory")
-
-#define ia64_set_pmc(index, val)						\
-	asm volatile ("mov pmc[%0]=%1" :: "r"(index), "r"(val) : "memory")
-
-#define ia64_set_pmd(index, val)						\
-	asm volatile ("mov pmd[%0]=%1" :: "r"(index), "r"(val) : "memory")
-
-#define ia64_native_set_rr(index, val)							\
-	asm volatile ("mov rr[%0]=%1" :: "r"(index), "r"(val) : "memory");
-
-#define ia64_native_get_cpuid(index)							\
-({											\
-	unsigned long ia64_intri_res;							\
-	asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index));	\
-	ia64_intri_res;									\
-})
-
-#define __ia64_get_dbr(index)							\
-({										\
-	unsigned long ia64_intri_res;						\
-	asm volatile ("mov %0=dbr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
-	ia64_intri_res;								\
-})
-
-#define ia64_get_ibr(index)							\
-({										\
-	unsigned long ia64_intri_res;						\
-	asm volatile ("mov %0=ibr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
-	ia64_intri_res;								\
-})
-
-#define ia64_get_pkr(index)							\
-({										\
-	unsigned long ia64_intri_res;						\
-	asm volatile ("mov %0=pkr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
-	ia64_intri_res;								\
-})
-
-#define ia64_get_pmc(index)							\
-({										\
-	unsigned long ia64_intri_res;						\
-	asm volatile ("mov %0=pmc[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
-	ia64_intri_res;								\
-})
-
-
-#define ia64_native_get_pmd(index)						\
-({										\
-	unsigned long ia64_intri_res;						\
-	asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
-	ia64_intri_res;								\
-})
-
-#define ia64_native_get_rr(index)						\
-({										\
-	unsigned long ia64_intri_res;						\
-	asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index));	\
-	ia64_intri_res;								\
-})
-
-#define ia64_native_fc(addr)	asm volatile ("fc %0" :: "r"(addr) : "memory")
-
-
-#define ia64_sync_i()	asm volatile (";; sync.i" ::: "memory")
-
-#define ia64_native_ssm(mask)	asm volatile ("ssm %0":: "i"((mask)) : "memory")
-#define ia64_native_rsm(mask)	asm volatile ("rsm %0":: "i"((mask)) : "memory")
-#define ia64_sum(mask)	asm volatile ("sum %0":: "i"((mask)) : "memory")
-#define ia64_rum(mask)	asm volatile ("rum %0":: "i"((mask)) : "memory")
-
-#define ia64_ptce(addr)	asm volatile ("ptc.e %0" :: "r"(addr))
-
-#define ia64_native_ptcga(addr, size)						\
-do {										\
-	asm volatile ("ptc.ga %0,%1" :: "r"(addr), "r"(size) : "memory");	\
-	ia64_dv_serialize_data();						\
-} while (0)
-
-#define ia64_ptcl(addr, size)							\
-do {										\
-	asm volatile ("ptc.l %0,%1" :: "r"(addr), "r"(size) : "memory");	\
-	ia64_dv_serialize_data();						\
-} while (0)
-
-#define ia64_ptri(addr, size)						\
-	asm volatile ("ptr.i %0,%1" :: "r"(addr), "r"(size) : "memory")
-
-#define ia64_ptrd(addr, size)						\
-	asm volatile ("ptr.d %0,%1" :: "r"(addr), "r"(size) : "memory")
-
-#define ia64_ttag(addr)							\
-({									  \
-	__u64 ia64_intri_res;						   \
-	asm volatile ("ttag %0=%1" : "=r"(ia64_intri_res) : "r" (addr));   \
-	ia64_intri_res;							 \
-})
-
-
-/* Values for lfhint in ia64_lfetch and ia64_lfetch_fault */
-
-#define ia64_lfhint_none   0
-#define ia64_lfhint_nt1    1
-#define ia64_lfhint_nt2    2
-#define ia64_lfhint_nta    3
-
-#define ia64_lfetch(lfhint, y)					\
-({								\
-        switch (lfhint) {					\
-        case ia64_lfhint_none:					\
-                asm volatile ("lfetch [%0]" : : "r"(y));	\
-                break;						\
-        case ia64_lfhint_nt1:					\
-                asm volatile ("lfetch.nt1 [%0]" : : "r"(y));	\
-                break;						\
-        case ia64_lfhint_nt2:					\
-                asm volatile ("lfetch.nt2 [%0]" : : "r"(y));	\
-                break;						\
-        case ia64_lfhint_nta:					\
-                asm volatile ("lfetch.nta [%0]" : : "r"(y));	\
-                break;						\
-        }							\
-})
-
-#define ia64_lfetch_excl(lfhint, y)					\
-({									\
-        switch (lfhint) {						\
-        case ia64_lfhint_none:						\
-                asm volatile ("lfetch.excl [%0]" :: "r"(y));		\
-                break;							\
-        case ia64_lfhint_nt1:						\
-                asm volatile ("lfetch.excl.nt1 [%0]" :: "r"(y));	\
-                break;							\
-        case ia64_lfhint_nt2:						\
-                asm volatile ("lfetch.excl.nt2 [%0]" :: "r"(y));	\
-                break;							\
-        case ia64_lfhint_nta:						\
-                asm volatile ("lfetch.excl.nta [%0]" :: "r"(y));	\
-                break;							\
-        }								\
-})
-
-#define ia64_lfetch_fault(lfhint, y)					\
-({									\
-        switch (lfhint) {						\
-        case ia64_lfhint_none:						\
-                asm volatile ("lfetch.fault [%0]" : : "r"(y));		\
-                break;							\
-        case ia64_lfhint_nt1:						\
-                asm volatile ("lfetch.fault.nt1 [%0]" : : "r"(y));	\
-                break;							\
-        case ia64_lfhint_nt2:						\
-                asm volatile ("lfetch.fault.nt2 [%0]" : : "r"(y));	\
-                break;							\
-        case ia64_lfhint_nta:						\
-                asm volatile ("lfetch.fault.nta [%0]" : : "r"(y));	\
-                break;							\
-        }								\
-})
-
-#define ia64_lfetch_fault_excl(lfhint, y)				\
-({									\
-        switch (lfhint) {						\
-        case ia64_lfhint_none:						\
-                asm volatile ("lfetch.fault.excl [%0]" :: "r"(y));	\
-                break;							\
-        case ia64_lfhint_nt1:						\
-                asm volatile ("lfetch.fault.excl.nt1 [%0]" :: "r"(y));	\
-                break;							\
-        case ia64_lfhint_nt2:						\
-                asm volatile ("lfetch.fault.excl.nt2 [%0]" :: "r"(y));	\
-                break;							\
-        case ia64_lfhint_nta:						\
-                asm volatile ("lfetch.fault.excl.nta [%0]" :: "r"(y));	\
-                break;							\
-        }								\
-})
-
-#define ia64_native_intrin_local_irq_restore(x)			\
-do {								\
-	asm volatile (";;   cmp.ne p6,p7=%0,r0;;"		\
-		      "(p6) ssm psr.i;"				\
-		      "(p7) rsm psr.i;;"			\
-		      "(p6) srlz.d"				\
-		      :: "r"((x)) : "p6", "p7", "memory");	\
-} while (0)
-
 #endif /* _ASM_IA64_GCC_INTRIN_H */
diff --git a/arch/ia64/include/asm/intrinsics.h b/arch/ia64/include/asm/intrinsics.h
index d129e36..20477ea 100644
--- a/arch/ia64/include/asm/intrinsics.h
+++ b/arch/ia64/include/asm/intrinsics.h
@@ -1,99 +1,16 @@
-#ifndef _ASM_IA64_INTRINSICS_H
-#define _ASM_IA64_INTRINSICS_H
-
 /*
  * Compiler-dependent intrinsics.
  *
  * Copyright (C) 2002-2003 Hewlett-Packard Co
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
+#ifndef _ASM_IA64_INTRINSICS_H
+#define _ASM_IA64_INTRINSICS_H
 
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-/* include compiler specific intrinsics */
-#include <asm/ia64regs.h>
-#ifdef __INTEL_COMPILER
-# include <asm/intel_intrin.h>
-#else
-# include <asm/gcc_intrin.h>
-#endif
-#include <asm/cmpxchg.h>
-
-#define ia64_native_get_psr_i()	(ia64_native_getreg(_IA64_REG_PSR) & IA64_PSR_I)
-
-#define ia64_native_set_rr0_to_rr4(val0, val1, val2, val3, val4)	\
-do {									\
-	ia64_native_set_rr(0x0000000000000000UL, (val0));		\
-	ia64_native_set_rr(0x2000000000000000UL, (val1));		\
-	ia64_native_set_rr(0x4000000000000000UL, (val2));		\
-	ia64_native_set_rr(0x6000000000000000UL, (val3));		\
-	ia64_native_set_rr(0x8000000000000000UL, (val4));		\
-} while (0)
-
-/*
- * Force an unresolved reference if someone tries to use
- * ia64_fetch_and_add() with a bad value.
- */
-extern unsigned long __bad_size_for_ia64_fetch_and_add (void);
-extern unsigned long __bad_increment_for_ia64_fetch_and_add (void);
-
-#define IA64_FETCHADD(tmp,v,n,sz,sem)						\
-({										\
-	switch (sz) {								\
-	      case 4:								\
-	        tmp = ia64_fetchadd4_##sem((unsigned int *) v, n);		\
-		break;								\
-										\
-	      case 8:								\
-	        tmp = ia64_fetchadd8_##sem((unsigned long *) v, n);		\
-		break;								\
-										\
-	      default:								\
-		__bad_size_for_ia64_fetch_and_add();				\
-	}									\
-})
-
-#define ia64_fetchadd(i,v,sem)								\
-({											\
-	__u64 _tmp;									\
-	volatile __typeof__(*(v)) *_v = (v);						\
-	/* Can't use a switch () here: gcc isn't always smart enough for that... */	\
-	if ((i) == -16)									\
-		IA64_FETCHADD(_tmp, _v, -16, sizeof(*(v)), sem);			\
-	else if ((i) == -8)								\
-		IA64_FETCHADD(_tmp, _v, -8, sizeof(*(v)), sem);				\
-	else if ((i) == -4)								\
-		IA64_FETCHADD(_tmp, _v, -4, sizeof(*(v)), sem);				\
-	else if ((i) == -1)								\
-		IA64_FETCHADD(_tmp, _v, -1, sizeof(*(v)), sem);				\
-	else if ((i) == 1)								\
-		IA64_FETCHADD(_tmp, _v, 1, sizeof(*(v)), sem);				\
-	else if ((i) == 4)								\
-		IA64_FETCHADD(_tmp, _v, 4, sizeof(*(v)), sem);				\
-	else if ((i) == 8)								\
-		IA64_FETCHADD(_tmp, _v, 8, sizeof(*(v)), sem);				\
-	else if ((i) == 16)								\
-		IA64_FETCHADD(_tmp, _v, 16, sizeof(*(v)), sem);				\
-	else										\
-		_tmp = __bad_increment_for_ia64_fetch_and_add();			\
-	(__typeof__(*(v))) (_tmp);	/* return old value */				\
-})
-
-#define ia64_fetch_and_add(i,v)	(ia64_fetchadd(i, v, rel) + (i)) /* return new value */
-
-#endif
-
-#ifdef __KERNEL__
 #include <asm/paravirt_privop.h>
-#endif
+#include <uapi/asm/intrinsics.h>
 
 #ifndef __ASSEMBLY__
-
-#define IA64_INTRINSIC_API(name)	ia64_native_ ## name
-#define IA64_INTRINSIC_MACRO(name)	ia64_native_ ## name
-
-#if defined(__KERNEL__)
 #if defined(CONFIG_PARAVIRT)
 # undef IA64_INTRINSIC_API
 # undef IA64_INTRINSIC_MACRO
@@ -104,36 +21,5 @@
 # endif
 #define IA64_INTRINSIC_MACRO(name)	paravirt_ ## name
 #endif
-#endif
-
-/************************************************/
-/* Instructions paravirtualized for correctness */
-/************************************************/
-/* fc, thash, get_cpuid, get_pmd, get_eflags, set_eflags */
-/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag"
- * is not currently used (though it may be in a long-format VHPT system!)
- */
-#define ia64_fc				IA64_INTRINSIC_API(fc)
-#define ia64_thash			IA64_INTRINSIC_API(thash)
-#define ia64_get_cpuid			IA64_INTRINSIC_API(get_cpuid)
-#define ia64_get_pmd			IA64_INTRINSIC_API(get_pmd)
-
-
-/************************************************/
-/* Instructions paravirtualized for performance */
-/************************************************/
-#define ia64_ssm			IA64_INTRINSIC_MACRO(ssm)
-#define ia64_rsm			IA64_INTRINSIC_MACRO(rsm)
-#define ia64_getreg			IA64_INTRINSIC_MACRO(getreg)
-#define ia64_setreg			IA64_INTRINSIC_API(setreg)
-#define ia64_set_rr			IA64_INTRINSIC_API(set_rr)
-#define ia64_get_rr			IA64_INTRINSIC_API(get_rr)
-#define ia64_ptcga			IA64_INTRINSIC_API(ptcga)
-#define ia64_get_psr_i			IA64_INTRINSIC_API(get_psr_i)
-#define ia64_intrin_local_irq_restore	\
-	IA64_INTRINSIC_API(intrin_local_irq_restore)
-#define ia64_set_rr0_to_rr4		IA64_INTRINSIC_API(set_rr0_to_rr4)
-
 #endif /* !__ASSEMBLY__ */
-
 #endif /* _ASM_IA64_INTRINSICS_H */
diff --git a/arch/ia64/include/asm/kvm_para.h b/arch/ia64/include/asm/kvm_para.h
index 2019cb9..47c00f9 100644
--- a/arch/ia64/include/asm/kvm_para.h
+++ b/arch/ia64/include/asm/kvm_para.h
@@ -1,6 +1,3 @@
-#ifndef __IA64_KVM_PARA_H
-#define __IA64_KVM_PARA_H
-
 /*
  * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
  *
@@ -18,8 +15,11 @@
  * Place - Suite 330, Boston, MA 02111-1307 USA.
  *
  */
+#ifndef __IA64_KVM_PARA_H
+#define __IA64_KVM_PARA_H
 
-#ifdef __KERNEL__
+#include <uapi/asm/kvm_para.h>
+
 
 static inline unsigned int kvm_arch_para_features(void)
 {
@@ -32,5 +32,3 @@
 }
 
 #endif
-
-#endif
diff --git a/arch/ia64/include/asm/mman.h b/arch/ia64/include/asm/mman.h
index 4459028..fdd5f52 100644
--- a/arch/ia64/include/asm/mman.h
+++ b/arch/ia64/include/asm/mman.h
@@ -1,23 +1,17 @@
-#ifndef _ASM_IA64_MMAN_H
-#define _ASM_IA64_MMAN_H
-
 /*
  * Based on <asm-i386/mman.h>.
  *
  * Modified 1998-2000, 2002
  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
  */
+#ifndef _ASM_IA64_MMAN_H
+#define _ASM_IA64_MMAN_H
 
-#include <asm-generic/mman.h>
+#include <uapi/asm/mman.h>
 
-#define MAP_GROWSUP	0x0200		/* register stack-like segment */
-
-#ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 #define arch_mmap_check	ia64_mmap_check
 int ia64_mmap_check(unsigned long addr, unsigned long len,
 		unsigned long flags);
 #endif
-#endif
-
 #endif /* _ASM_IA64_MMAN_H */
diff --git a/arch/ia64/include/asm/param.h b/arch/ia64/include/asm/param.h
index 0964c32..1295913 100644
--- a/arch/ia64/include/asm/param.h
+++ b/arch/ia64/include/asm/param.h
@@ -1,6 +1,3 @@
-#ifndef _ASM_IA64_PARAM_H
-#define _ASM_IA64_PARAM_H
-
 /*
  * Fundamental kernel parameters.
  *
@@ -9,25 +6,12 @@
  * Modified 1998, 1999, 2002-2003
  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
  */
+#ifndef _ASM_IA64_PARAM_H
+#define _ASM_IA64_PARAM_H
 
-#define EXEC_PAGESIZE	65536
+#include <uapi/asm/param.h>
 
-#ifndef NOGROUP
-# define NOGROUP	(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#ifdef __KERNEL__
 # define HZ		CONFIG_HZ
 # define USER_HZ	HZ
 # define CLOCKS_PER_SEC	HZ	/* frequency at which times() counts */
-#else
-   /*
-    * Technically, this is wrong, but some old apps still refer to it.  The proper way to
-    * get the HZ value is via sysconf(_SC_CLK_TCK).
-    */
-# define HZ 1024
-#endif
-
 #endif /* _ASM_IA64_PARAM_H */
diff --git a/arch/ia64/include/asm/perfmon.h b/arch/ia64/include/asm/perfmon.h
index d551183..15476dd 100644
--- a/arch/ia64/include/asm/perfmon.h
+++ b/arch/ia64/include/asm/perfmon.h
@@ -2,178 +2,11 @@
  * Copyright (C) 2001-2003 Hewlett-Packard Co
  *               Stephane Eranian <eranian@hpl.hp.com>
  */
-
 #ifndef _ASM_IA64_PERFMON_H
 #define _ASM_IA64_PERFMON_H
 
-/*
- * perfmon commands supported on all CPU models
- */
-#define PFM_WRITE_PMCS		0x01
-#define PFM_WRITE_PMDS		0x02
-#define PFM_READ_PMDS		0x03
-#define PFM_STOP		0x04
-#define PFM_START		0x05
-#define PFM_ENABLE		0x06 /* obsolete */
-#define PFM_DISABLE		0x07 /* obsolete */
-#define PFM_CREATE_CONTEXT	0x08
-#define PFM_DESTROY_CONTEXT	0x09 /* obsolete use close() */
-#define PFM_RESTART		0x0a
-#define PFM_PROTECT_CONTEXT	0x0b /* obsolete */
-#define PFM_GET_FEATURES	0x0c
-#define PFM_DEBUG		0x0d
-#define PFM_UNPROTECT_CONTEXT	0x0e /* obsolete */
-#define PFM_GET_PMC_RESET_VAL	0x0f
-#define PFM_LOAD_CONTEXT	0x10
-#define PFM_UNLOAD_CONTEXT	0x11
+#include <uapi/asm/perfmon.h>
 
-/*
- * PMU model specific commands (may not be supported on all PMU models)
- */
-#define PFM_WRITE_IBRS		0x20
-#define PFM_WRITE_DBRS		0x21
-
-/*
- * context flags
- */
-#define PFM_FL_NOTIFY_BLOCK    	 0x01	/* block task on user level notifications */
-#define PFM_FL_SYSTEM_WIDE	 0x02	/* create a system wide context */
-#define PFM_FL_OVFL_NO_MSG	 0x80   /* do not post overflow/end messages for notification */
-
-/*
- * event set flags
- */
-#define PFM_SETFL_EXCL_IDLE      0x01   /* exclude idle task (syswide only) XXX: DO NOT USE YET */
-
-/*
- * PMC flags
- */
-#define PFM_REGFL_OVFL_NOTIFY	0x1	/* send notification on overflow */
-#define PFM_REGFL_RANDOM	0x2	/* randomize sampling interval   */
-
-/*
- * PMD/PMC/IBR/DBR return flags (ignored on input)
- *
- * Those flags are used on output and must be checked in case EAGAIN is returned
- * by any of the calls using a pfarg_reg_t or pfarg_dbreg_t structure.
- */
-#define PFM_REG_RETFL_NOTAVAIL	(1UL<<31) /* set if register is implemented but not available */
-#define PFM_REG_RETFL_EINVAL	(1UL<<30) /* set if register entry is invalid */
-#define PFM_REG_RETFL_MASK	(PFM_REG_RETFL_NOTAVAIL|PFM_REG_RETFL_EINVAL)
-
-#define PFM_REG_HAS_ERROR(flag)	(((flag) & PFM_REG_RETFL_MASK) != 0)
-
-typedef unsigned char pfm_uuid_t[16];	/* custom sampling buffer identifier type */
-
-/*
- * Request structure used to define a context
- */
-typedef struct {
-	pfm_uuid_t     ctx_smpl_buf_id;	 /* which buffer format to use (if needed) */
-	unsigned long  ctx_flags;	 /* noblock/block */
-	unsigned short ctx_nextra_sets;	 /* number of extra event sets (you always get 1) */
-	unsigned short ctx_reserved1;	 /* for future use */
-	int	       ctx_fd;		 /* return arg: unique identification for context */
-	void	       *ctx_smpl_vaddr;	 /* return arg: virtual address of sampling buffer, is used */
-	unsigned long  ctx_reserved2[11];/* for future use */
-} pfarg_context_t;
-
-/*
- * Request structure used to write/read a PMC or PMD
- */
-typedef struct {
-	unsigned int	reg_num;	   /* which register */
-	unsigned short	reg_set;	   /* event set for this register */
-	unsigned short	reg_reserved1;	   /* for future use */
-
-	unsigned long	reg_value;	   /* initial pmc/pmd value */
-	unsigned long	reg_flags;	   /* input: pmc/pmd flags, return: reg error */
-
-	unsigned long	reg_long_reset;	   /* reset after buffer overflow notification */
-	unsigned long	reg_short_reset;   /* reset after counter overflow */
-
-	unsigned long	reg_reset_pmds[4]; /* which other counters to reset on overflow */
-	unsigned long	reg_random_seed;   /* seed value when randomization is used */
-	unsigned long	reg_random_mask;   /* bitmask used to limit random value */
-	unsigned long   reg_last_reset_val;/* return: PMD last reset value */
-
-	unsigned long	reg_smpl_pmds[4];  /* which pmds are accessed when PMC overflows */
-	unsigned long	reg_smpl_eventid;  /* opaque sampling event identifier */
-
-	unsigned long   reg_reserved2[3];   /* for future use */
-} pfarg_reg_t;
-
-typedef struct {
-	unsigned int	dbreg_num;		/* which debug register */
-	unsigned short	dbreg_set;		/* event set for this register */
-	unsigned short	dbreg_reserved1;	/* for future use */
-	unsigned long	dbreg_value;		/* value for debug register */
-	unsigned long	dbreg_flags;		/* return: dbreg error */
-	unsigned long	dbreg_reserved2[1];	/* for future use */
-} pfarg_dbreg_t;
-
-typedef struct {
-	unsigned int	ft_version;	/* perfmon: major [16-31], minor [0-15] */
-	unsigned int	ft_reserved;	/* reserved for future use */
-	unsigned long	reserved[4];	/* for future use */
-} pfarg_features_t;
-
-typedef struct {
-	pid_t		load_pid;	   /* process to load the context into */
-	unsigned short	load_set;	   /* first event set to load */
-	unsigned short	load_reserved1;	   /* for future use */
-	unsigned long	load_reserved2[3]; /* for future use */
-} pfarg_load_t;
-
-typedef struct {
-	int		msg_type;		/* generic message header */
-	int		msg_ctx_fd;		/* generic message header */
-	unsigned long	msg_ovfl_pmds[4];	/* which PMDs overflowed */
-	unsigned short  msg_active_set;		/* active set at the time of overflow */
-	unsigned short  msg_reserved1;		/* for future use */
-	unsigned int    msg_reserved2;		/* for future use */
-	unsigned long	msg_tstamp;		/* for perf tuning/debug */
-} pfm_ovfl_msg_t;
-
-typedef struct {
-	int		msg_type;		/* generic message header */
-	int		msg_ctx_fd;		/* generic message header */
-	unsigned long	msg_tstamp;		/* for perf tuning */
-} pfm_end_msg_t;
-
-typedef struct {
-	int		msg_type;		/* type of the message */
-	int		msg_ctx_fd;		/* unique identifier for the context */
-	unsigned long	msg_tstamp;		/* for perf tuning */
-} pfm_gen_msg_t;
-
-#define PFM_MSG_OVFL	1	/* an overflow happened */
-#define PFM_MSG_END	2	/* task to which context was attached ended */
-
-typedef union {
-	pfm_ovfl_msg_t	pfm_ovfl_msg;
-	pfm_end_msg_t	pfm_end_msg;
-	pfm_gen_msg_t	pfm_gen_msg;
-} pfm_msg_t;
-
-/*
- * Define the version numbers for both perfmon as a whole and the sampling buffer format.
- */
-#define PFM_VERSION_MAJ		 2U
-#define PFM_VERSION_MIN		 0U
-#define PFM_VERSION		 (((PFM_VERSION_MAJ&0xffff)<<16)|(PFM_VERSION_MIN & 0xffff))
-#define PFM_VERSION_MAJOR(x)	 (((x)>>16) & 0xffff)
-#define PFM_VERSION_MINOR(x)	 ((x) & 0xffff)
-
-
-/*
- * miscellaneous architected definitions
- */
-#define PMU_FIRST_COUNTER	4	/* first counting monitor (PMC/PMD) */
-#define PMU_MAX_PMCS		256	/* maximum architected number of PMC registers */
-#define PMU_MAX_PMDS		256	/* maximum architected number of PMD registers */
-
-#ifdef __KERNEL__
 
 extern long perfmonctl(int fd, int cmd, void *arg, int narg);
 
@@ -274,6 +107,4 @@
 extern pfm_sysctl_t pfm_sysctl;
 
 
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_IA64_PERFMON_H */
diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h
index 68c98f5..b0e9736 100644
--- a/arch/ia64/include/asm/ptrace.h
+++ b/arch/ia64/include/asm/ptrace.h
@@ -1,6 +1,3 @@
-#ifndef _ASM_IA64_PTRACE_H
-#define _ASM_IA64_PTRACE_H
-
 /*
  * Copyright (C) 1998-2004 Hewlett-Packard Co
  *	David Mosberger-Tang <davidm@hpl.hp.com>
@@ -15,52 +12,13 @@
  *  6/17/99	D. Mosberger	added second unat member to "struct switch_stack"
  *
  */
-/*
- * When a user process is blocked, its state looks as follows:
- *
- *            +----------------------+	-------	IA64_STK_OFFSET
- *     	      |			     |	 ^
- *            | struct pt_regs       |	 |
- *	      |			     |	 |
- *            +----------------------+	 |
- *	      |			     |	 |
- *     	      |	   memory stack	     |	 |
- *	      |	(growing downwards)  |	 |
- *	      //.....................//	 |
- *					 |
- *	      //.....................//	 |
- *	      |			     |	 |
- *            +----------------------+	 |
- *            | struct switch_stack  |	 |
- *	      |			     |	 |
- *	      +----------------------+	 |
- *	      |			     |	 |
- *	      //.....................//	 |
- *					 |
- *	      //.....................//	 |
- *	      |			     |	 |
- *	      |	 register stack	     |	 |
- *	      |	(growing upwards)    |	 |
- *            |			     |	 |
- *	      +----------------------+	 |  ---	IA64_RBS_OFFSET
- *            |  struct thread_info  |	 |  ^
- *	      +----------------------+	 |  |
- *	      |			     |	 |  |
- *            |  struct task_struct  |	 |  |
- * current -> |			     |   |  |
- *	      +----------------------+ -------
- *
- * Note that ar.ec is not saved explicitly in pt_reg or switch_stack.
- * This is because ar.ec is saved as part of ar.pfs.
- */
+#ifndef _ASM_IA64_PTRACE_H
+#define _ASM_IA64_PTRACE_H
 
-
-#include <asm/fpu.h>
-
-#ifdef __KERNEL__
 #ifndef ASM_OFFSETS_C
 #include <asm/asm-offsets.h>
 #endif
+#include <uapi/asm/ptrace.h>
 
 /*
  * Base-2 logarithm of number of pages to allocate per task structure
@@ -81,155 +39,8 @@
 
 #define KERNEL_STACK_SIZE		IA64_STK_OFFSET
 
-#endif /* __KERNEL__ */
-
 #ifndef __ASSEMBLY__
 
-/*
- * This struct defines the way the registers are saved on system
- * calls.
- *
- * We don't save all floating point register because the kernel
- * is compiled to use only a very small subset, so the other are
- * untouched.
- *
- * THIS STRUCTURE MUST BE A MULTIPLE 16-BYTE IN SIZE
- * (because the memory stack pointer MUST ALWAYS be aligned this way)
- *
- */
-struct pt_regs {
-	/* The following registers are saved by SAVE_MIN: */
-	unsigned long b6;		/* scratch */
-	unsigned long b7;		/* scratch */
-
-	unsigned long ar_csd;           /* used by cmp8xchg16 (scratch) */
-	unsigned long ar_ssd;           /* reserved for future use (scratch) */
-
-	unsigned long r8;		/* scratch (return value register 0) */
-	unsigned long r9;		/* scratch (return value register 1) */
-	unsigned long r10;		/* scratch (return value register 2) */
-	unsigned long r11;		/* scratch (return value register 3) */
-
-	unsigned long cr_ipsr;		/* interrupted task's psr */
-	unsigned long cr_iip;		/* interrupted task's instruction pointer */
-	/*
-	 * interrupted task's function state; if bit 63 is cleared, it
-	 * contains syscall's ar.pfs.pfm:
-	 */
-	unsigned long cr_ifs;
-
-	unsigned long ar_unat;		/* interrupted task's NaT register (preserved) */
-	unsigned long ar_pfs;		/* prev function state  */
-	unsigned long ar_rsc;		/* RSE configuration */
-	/* The following two are valid only if cr_ipsr.cpl > 0 || ti->flags & _TIF_MCA_INIT */
-	unsigned long ar_rnat;		/* RSE NaT */
-	unsigned long ar_bspstore;	/* RSE bspstore */
-
-	unsigned long pr;		/* 64 predicate registers (1 bit each) */
-	unsigned long b0;		/* return pointer (bp) */
-	unsigned long loadrs;		/* size of dirty partition << 16 */
-
-	unsigned long r1;		/* the gp pointer */
-	unsigned long r12;		/* interrupted task's memory stack pointer */
-	unsigned long r13;		/* thread pointer */
-
-	unsigned long ar_fpsr;		/* floating point status (preserved) */
-	unsigned long r15;		/* scratch */
-
-	/* The remaining registers are NOT saved for system calls.  */
-
-	unsigned long r14;		/* scratch */
-	unsigned long r2;		/* scratch */
-	unsigned long r3;		/* scratch */
-
-	/* The following registers are saved by SAVE_REST: */
-	unsigned long r16;		/* scratch */
-	unsigned long r17;		/* scratch */
-	unsigned long r18;		/* scratch */
-	unsigned long r19;		/* scratch */
-	unsigned long r20;		/* scratch */
-	unsigned long r21;		/* scratch */
-	unsigned long r22;		/* scratch */
-	unsigned long r23;		/* scratch */
-	unsigned long r24;		/* scratch */
-	unsigned long r25;		/* scratch */
-	unsigned long r26;		/* scratch */
-	unsigned long r27;		/* scratch */
-	unsigned long r28;		/* scratch */
-	unsigned long r29;		/* scratch */
-	unsigned long r30;		/* scratch */
-	unsigned long r31;		/* scratch */
-
-	unsigned long ar_ccv;		/* compare/exchange value (scratch) */
-
-	/*
-	 * Floating point registers that the kernel considers scratch:
-	 */
-	struct ia64_fpreg f6;		/* scratch */
-	struct ia64_fpreg f7;		/* scratch */
-	struct ia64_fpreg f8;		/* scratch */
-	struct ia64_fpreg f9;		/* scratch */
-	struct ia64_fpreg f10;		/* scratch */
-	struct ia64_fpreg f11;		/* scratch */
-};
-
-/*
- * This structure contains the addition registers that need to
- * preserved across a context switch.  This generally consists of
- * "preserved" registers.
- */
-struct switch_stack {
-	unsigned long caller_unat;	/* user NaT collection register (preserved) */
-	unsigned long ar_fpsr;		/* floating-point status register */
-
-	struct ia64_fpreg f2;		/* preserved */
-	struct ia64_fpreg f3;		/* preserved */
-	struct ia64_fpreg f4;		/* preserved */
-	struct ia64_fpreg f5;		/* preserved */
-
-	struct ia64_fpreg f12;		/* scratch, but untouched by kernel */
-	struct ia64_fpreg f13;		/* scratch, but untouched by kernel */
-	struct ia64_fpreg f14;		/* scratch, but untouched by kernel */
-	struct ia64_fpreg f15;		/* scratch, but untouched by kernel */
-	struct ia64_fpreg f16;		/* preserved */
-	struct ia64_fpreg f17;		/* preserved */
-	struct ia64_fpreg f18;		/* preserved */
-	struct ia64_fpreg f19;		/* preserved */
-	struct ia64_fpreg f20;		/* preserved */
-	struct ia64_fpreg f21;		/* preserved */
-	struct ia64_fpreg f22;		/* preserved */
-	struct ia64_fpreg f23;		/* preserved */
-	struct ia64_fpreg f24;		/* preserved */
-	struct ia64_fpreg f25;		/* preserved */
-	struct ia64_fpreg f26;		/* preserved */
-	struct ia64_fpreg f27;		/* preserved */
-	struct ia64_fpreg f28;		/* preserved */
-	struct ia64_fpreg f29;		/* preserved */
-	struct ia64_fpreg f30;		/* preserved */
-	struct ia64_fpreg f31;		/* preserved */
-
-	unsigned long r4;		/* preserved */
-	unsigned long r5;		/* preserved */
-	unsigned long r6;		/* preserved */
-	unsigned long r7;		/* preserved */
-
-	unsigned long b0;		/* so we can force a direct return in copy_thread */
-	unsigned long b1;
-	unsigned long b2;
-	unsigned long b3;
-	unsigned long b4;
-	unsigned long b5;
-
-	unsigned long ar_pfs;		/* previous function state */
-	unsigned long ar_lc;		/* loop counter (preserved) */
-	unsigned long ar_unat;		/* NaT bits for r4-r7 */
-	unsigned long ar_rnat;		/* RSE NaT collection register */
-	unsigned long ar_bspstore;	/* RSE dirty base (preserved) */
-	unsigned long pr;		/* 64 predicate registers (1 bit each) */
-};
-
-#ifdef __KERNEL__
-
 #include <asm/current.h>
 #include <asm/page.h>
 
@@ -331,46 +142,5 @@
   #define arch_has_single_step()  (1)
   #define arch_has_block_step()   (1)
 
-#endif /* !__KERNEL__ */
-
-/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
-struct pt_all_user_regs {
-	unsigned long nat;
-	unsigned long cr_iip;
-	unsigned long cfm;
-	unsigned long cr_ipsr;
-	unsigned long pr;
-
-	unsigned long gr[32];
-	unsigned long br[8];
-	unsigned long ar[128];
-	struct ia64_fpreg fr[128];
-};
-
 #endif /* !__ASSEMBLY__ */
-
-/* indices to application-registers array in pt_all_user_regs */
-#define PT_AUR_RSC	16
-#define PT_AUR_BSP	17
-#define PT_AUR_BSPSTORE	18
-#define PT_AUR_RNAT	19
-#define PT_AUR_CCV	32
-#define PT_AUR_UNAT	36
-#define PT_AUR_FPSR	40
-#define PT_AUR_PFS	64
-#define PT_AUR_LC	65
-#define PT_AUR_EC	66
-
-/*
- * The numbers chosen here are somewhat arbitrary but absolutely MUST
- * not overlap with any of the number assigned in <linux/ptrace.h>.
- */
-#define PTRACE_SINGLEBLOCK	12	/* resume execution until next branch */
-#define PTRACE_OLD_GETSIGINFO	13	/* (replaced by PTRACE_GETSIGINFO in <linux/ptrace.h>)  */
-#define PTRACE_OLD_SETSIGINFO	14	/* (replaced by PTRACE_SETSIGINFO in <linux/ptrace.h>)  */
-#define PTRACE_GETREGS		18	/* get all registers (pt_all_user_regs) in one shot */
-#define PTRACE_SETREGS		19	/* set all registers (pt_all_user_regs) in one shot */
-
-#define PTRACE_OLDSETOPTIONS	21
-
 #endif /* _ASM_IA64_PTRACE_H */
diff --git a/arch/ia64/include/asm/siginfo.h b/arch/ia64/include/asm/siginfo.h
index c8fcaa2..6f2e2dd 100644
--- a/arch/ia64/include/asm/siginfo.h
+++ b/arch/ia64/include/asm/siginfo.h
@@ -1,124 +1,14 @@
-#ifndef _ASM_IA64_SIGINFO_H
-#define _ASM_IA64_SIGINFO_H
-
 /*
  * Based on <asm-i386/siginfo.h>.
  *
  * Modified 1998-2002
  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
  */
+#ifndef _ASM_IA64_SIGINFO_H
+#define _ASM_IA64_SIGINFO_H
 
-#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
-
-#define HAVE_ARCH_SIGINFO_T
-#define HAVE_ARCH_COPY_SIGINFO
-#define HAVE_ARCH_COPY_SIGINFO_TO_USER
-
-#include <asm-generic/siginfo.h>
-
-typedef struct siginfo {
-	int si_signo;
-	int si_errno;
-	int si_code;
-	int __pad0;
-
-	union {
-		int _pad[SI_PAD_SIZE];
-
-		/* kill() */
-		struct {
-			pid_t _pid;		/* sender's pid */
-			uid_t _uid;		/* sender's uid */
-		} _kill;
-
-		/* POSIX.1b timers */
-		struct {
-			timer_t _tid;		/* timer id */
-			int _overrun;		/* overrun count */
-			char _pad[sizeof(__ARCH_SI_UID_T) - sizeof(int)];
-			sigval_t _sigval;	/* must overlay ._rt._sigval! */
-			int _sys_private;	/* not to be passed to user */
-		} _timer;
-
-		/* POSIX.1b signals */
-		struct {
-			pid_t _pid;		/* sender's pid */
-			uid_t _uid;		/* sender's uid */
-			sigval_t _sigval;
-		} _rt;
-
-		/* SIGCHLD */
-		struct {
-			pid_t _pid;		/* which child */
-			uid_t _uid;		/* sender's uid */
-			int _status;		/* exit code */
-			clock_t _utime;
-			clock_t _stime;
-		} _sigchld;
-
-		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
-		struct {
-			void __user *_addr;	/* faulting insn/memory ref. */
-			int _imm;		/* immediate value for "break" */
-			unsigned int _flags;	/* see below */
-			unsigned long _isr;	/* isr */
-			short _addr_lsb;	/* lsb of faulting address */
-		} _sigfault;
-
-		/* SIGPOLL */
-		struct {
-			long _band;	/* POLL_IN, POLL_OUT, POLL_MSG (XPG requires a "long") */
-			int _fd;
-		} _sigpoll;
-	} _sifields;
-} siginfo_t;
-
-#define si_imm		_sifields._sigfault._imm	/* as per UNIX SysV ABI spec */
-#define si_flags	_sifields._sigfault._flags
-/*
- * si_isr is valid for SIGILL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP provided that
- * si_code is non-zero and __ISR_VALID is set in si_flags.
- */
-#define si_isr		_sifields._sigfault._isr
-
-/*
- * Flag values for si_flags:
- */
-#define __ISR_VALID_BIT	0
-#define __ISR_VALID	(1 << __ISR_VALID_BIT)
-
-/*
- * SIGILL si_codes
- */
-#define ILL_BADIADDR	(__SI_FAULT|9)	/* unimplemented instruction address */
-#define __ILL_BREAK	(__SI_FAULT|10)	/* illegal break */
-#define __ILL_BNDMOD	(__SI_FAULT|11)	/* bundle-update (modification) in progress */
-#undef NSIGILL
-#define NSIGILL		11
-
-/*
- * SIGFPE si_codes
- */
-#define __FPE_DECOVF	(__SI_FAULT|9)	/* decimal overflow */
-#define __FPE_DECDIV	(__SI_FAULT|10)	/* decimal division by zero */
-#define __FPE_DECERR	(__SI_FAULT|11)	/* packed decimal error */
-#define __FPE_INVASC	(__SI_FAULT|12)	/* invalid ASCII digit */
-#define __FPE_INVDEC	(__SI_FAULT|13)	/* invalid decimal digit */
-#undef NSIGFPE
-#define NSIGFPE		13
-
-/*
- * SIGSEGV si_codes
- */
-#define __SEGV_PSTKOVF	(__SI_FAULT|3)	/* paragraph stack overflow */
-#undef NSIGSEGV
-#define NSIGSEGV	3
-
-#undef NSIGTRAP
-#define NSIGTRAP	4
-
-#ifdef __KERNEL__
 #include <linux/string.h>
+#include <uapi/asm/siginfo.h>
 
 static inline void
 copy_siginfo (siginfo_t *to, siginfo_t *from)
@@ -130,6 +20,4 @@
 		memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld));
 }
 
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_IA64_SIGINFO_H */
diff --git a/arch/ia64/include/asm/signal.h b/arch/ia64/include/asm/signal.h
index b166248..aecda5b 100644
--- a/arch/ia64/include/asm/signal.h
+++ b/arch/ia64/include/asm/signal.h
@@ -1,6 +1,3 @@
-#ifndef _ASM_IA64_SIGNAL_H
-#define _ASM_IA64_SIGNAL_H
-
 /*
  * Modified 1998-2001, 2003
  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
@@ -8,129 +5,18 @@
  * Unfortunately, this file is being included by bits/signal.h in
  * glibc-2.x.  Hence the #ifdef __KERNEL__ ugliness.
  */
+#ifndef _ASM_IA64_SIGNAL_H
+#define _ASM_IA64_SIGNAL_H
 
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-/* signal 31 is no longer "unused", but the SIGUNUSED macro remains for backwards compatibility */
-#define	SIGUNUSED	31
+#include <uapi/asm/signal.h>
 
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001
-#define SA_NOCLDWAIT	0x00000002
-#define SA_SIGINFO	0x00000004
-#define SA_ONSTACK	0x08000000
-#define SA_RESTART	0x10000000
-#define SA_NODEFER	0x40000000
-#define SA_RESETHAND	0x80000000
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-/*
- * The minimum stack size needs to be fairly large because we want to
- * be sure that an app compiled for today's CPUs will continue to run
- * on all future CPU models.  The CPU model matters because the signal
- * frame needs to have space for the complete machine state, including
- * all physical stacked registers.  The number of physical stacked
- * registers is CPU model dependent, but given that the width of
- * ar.rsc.loadrs is 14 bits, we can assume that they'll never take up
- * more than 16KB of space.
- */
-#if 1
-  /*
-   * This is a stupid typo: the value was _meant_ to be 131072 (0x20000), but I typed it
-   * in wrong. ;-(  To preserve backwards compatibility, we leave the kernel at the
-   * incorrect value and fix libc only.
-   */
-# define MINSIGSTKSZ	131027	/* min. stack size for sigaltstack() */
-#else
-# define MINSIGSTKSZ	131072	/* min. stack size for sigaltstack() */
-#endif
-#define SIGSTKSZ	262144	/* default stack size for sigaltstack() */
-
-#ifdef __KERNEL__
 
 #define _NSIG		64
 #define _NSIG_BPW	64
 #define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
 
-#endif /* __KERNEL__ */
-
-#include <asm-generic/signal-defs.h>
-
 # ifndef __ASSEMBLY__
 
-#  include <linux/types.h>
-
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
 /* Most things should be clean enough to redefine this at will, if care
    is taken to make libc match.  */
 
@@ -154,7 +40,5 @@
 
 #define ptrace_signal_deliver(regs, cookie) do { } while (0)
 
-#endif /* __KERNEL__ */
-
 # endif /* !__ASSEMBLY__ */
 #endif /* _ASM_IA64_SIGNAL_H */
diff --git a/arch/ia64/include/asm/termios.h b/arch/ia64/include/asm/termios.h
index 689d218..a42f870 100644
--- a/arch/ia64/include/asm/termios.h
+++ b/arch/ia64/include/asm/termios.h
@@ -1,52 +1,14 @@
-#ifndef _ASM_IA64_TERMIOS_H
-#define _ASM_IA64_TERMIOS_H
-
 /*
  * Modified 1999
  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
  *
  * 99/01/28	Added N_IRDA and N_SMSBLOCK
  */
+#ifndef _ASM_IA64_TERMIOS_H
+#define _ASM_IA64_TERMIOS_H
 
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
+#include <uapi/asm/termios.h>
 
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-# ifdef __KERNEL__
 
 /*	intr=^C		quit=^\		erase=del	kill=^U
 	eof=^D		vtime=\0	vmin=\1		sxtc=\0
@@ -92,6 +54,4 @@
 #define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
 #define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
 
-# endif /* __KERNEL__ */
-
 #endif /* _ASM_IA64_TERMIOS_H */
diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h
index 3f5b122..4c351b1 100644
--- a/arch/ia64/include/asm/types.h
+++ b/arch/ia64/include/asm/types.h
@@ -1,6 +1,3 @@
-#ifndef _ASM_IA64_TYPES_H
-#define _ASM_IA64_TYPES_H
-
 /*
  * This file is never included by application software unless explicitly
  * requested (e.g., via linux/types.h) in which case the application is
@@ -13,32 +10,22 @@
  * Modified 1998-2000, 2002
  *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
  */
+#ifndef _ASM_IA64_TYPES_H
+#define _ASM_IA64_TYPES_H
 
-#ifdef __KERNEL__
 #include <asm-generic/int-ll64.h>
-#else
-#include <asm-generic/int-l64.h>
-#endif
+#include <uapi/asm/types.h>
 
 #ifdef __ASSEMBLY__
-# define __IA64_UL(x)		(x)
-# define __IA64_UL_CONST(x)	x
-
 #else
-# define __IA64_UL(x)		((unsigned long)(x))
-# define __IA64_UL_CONST(x)	x##UL
-
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
-# ifdef __KERNEL__
 
 struct fnptr {
 	unsigned long ip;
 	unsigned long gp;
 };
 
-# endif /* __KERNEL__ */
 #endif /* !__ASSEMBLY__ */
-
 #endif /* _ASM_IA64_TYPES_H */
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 7a3bd25..8b3ff2f 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -1,331 +1,14 @@
-#ifndef _ASM_IA64_UNISTD_H
-#define _ASM_IA64_UNISTD_H
-
 /*
  * IA-64 Linux syscall numbers and inline-functions.
  *
  * Copyright (C) 1998-2005 Hewlett-Packard Co
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
+#ifndef _ASM_IA64_UNISTD_H
+#define _ASM_IA64_UNISTD_H
 
-#include <asm/break.h>
+#include <uapi/asm/unistd.h>
 
-#define __BREAK_SYSCALL			__IA64_BREAK_SYSCALL
-
-#define __NR_ni_syscall			1024
-#define __NR_exit			1025
-#define __NR_read			1026
-#define __NR_write			1027
-#define __NR_open			1028
-#define __NR_close			1029
-#define __NR_creat			1030
-#define __NR_link			1031
-#define __NR_unlink			1032
-#define __NR_execve			1033
-#define __NR_chdir			1034
-#define __NR_fchdir			1035
-#define __NR_utimes			1036
-#define __NR_mknod			1037
-#define __NR_chmod			1038
-#define __NR_chown			1039
-#define __NR_lseek			1040
-#define __NR_getpid			1041
-#define __NR_getppid			1042
-#define __NR_mount			1043
-#define __NR_umount			1044
-#define __NR_setuid			1045
-#define __NR_getuid			1046
-#define __NR_geteuid			1047
-#define __NR_ptrace			1048
-#define __NR_access			1049
-#define __NR_sync			1050
-#define __NR_fsync			1051
-#define __NR_fdatasync			1052
-#define __NR_kill			1053
-#define __NR_rename			1054
-#define __NR_mkdir			1055
-#define __NR_rmdir			1056
-#define __NR_dup			1057
-#define __NR_pipe			1058
-#define __NR_times			1059
-#define __NR_brk			1060
-#define __NR_setgid			1061
-#define __NR_getgid			1062
-#define __NR_getegid			1063
-#define __NR_acct			1064
-#define __NR_ioctl			1065
-#define __NR_fcntl			1066
-#define __NR_umask			1067
-#define __NR_chroot			1068
-#define __NR_ustat			1069
-#define __NR_dup2			1070
-#define __NR_setreuid			1071
-#define __NR_setregid			1072
-#define __NR_getresuid			1073
-#define __NR_setresuid			1074
-#define __NR_getresgid			1075
-#define __NR_setresgid			1076
-#define __NR_getgroups			1077
-#define __NR_setgroups			1078
-#define __NR_getpgid			1079
-#define __NR_setpgid			1080
-#define __NR_setsid			1081
-#define __NR_getsid			1082
-#define __NR_sethostname		1083
-#define __NR_setrlimit			1084
-#define __NR_getrlimit			1085
-#define __NR_getrusage			1086
-#define __NR_gettimeofday		1087
-#define __NR_settimeofday		1088
-#define __NR_select			1089
-#define __NR_poll			1090
-#define __NR_symlink			1091
-#define __NR_readlink			1092
-#define __NR_uselib			1093
-#define __NR_swapon			1094
-#define __NR_swapoff			1095
-#define __NR_reboot			1096
-#define __NR_truncate			1097
-#define __NR_ftruncate			1098
-#define __NR_fchmod			1099
-#define __NR_fchown			1100
-#define __NR_getpriority		1101
-#define __NR_setpriority		1102
-#define __NR_statfs			1103
-#define __NR_fstatfs			1104
-#define __NR_gettid			1105
-#define __NR_semget			1106
-#define __NR_semop			1107
-#define __NR_semctl			1108
-#define __NR_msgget			1109
-#define __NR_msgsnd			1110
-#define __NR_msgrcv			1111
-#define __NR_msgctl			1112
-#define __NR_shmget			1113
-#define __NR_shmat			1114
-#define __NR_shmdt			1115
-#define __NR_shmctl			1116
-/* also known as klogctl() in GNU libc: */
-#define __NR_syslog			1117
-#define __NR_setitimer			1118
-#define __NR_getitimer			1119
-/* 1120 was __NR_old_stat */
-/* 1121 was __NR_old_lstat */
-/* 1122 was __NR_old_fstat */
-#define __NR_vhangup			1123
-#define __NR_lchown			1124
-#define __NR_remap_file_pages		1125
-#define __NR_wait4			1126
-#define __NR_sysinfo			1127
-#define __NR_clone			1128
-#define __NR_setdomainname		1129
-#define __NR_uname			1130
-#define __NR_adjtimex			1131
-/* 1132 was __NR_create_module */
-#define __NR_init_module		1133
-#define __NR_delete_module		1134
-/* 1135 was __NR_get_kernel_syms */
-/* 1136 was __NR_query_module */
-#define __NR_quotactl			1137
-#define __NR_bdflush			1138
-#define __NR_sysfs			1139
-#define __NR_personality		1140
-#define __NR_afs_syscall		1141
-#define __NR_setfsuid			1142
-#define __NR_setfsgid			1143
-#define __NR_getdents			1144
-#define __NR_flock			1145
-#define __NR_readv			1146
-#define __NR_writev			1147
-#define __NR_pread64			1148
-#define __NR_pwrite64			1149
-#define __NR__sysctl			1150
-#define __NR_mmap			1151
-#define __NR_munmap			1152
-#define __NR_mlock			1153
-#define __NR_mlockall			1154
-#define __NR_mprotect			1155
-#define __NR_mremap			1156
-#define __NR_msync			1157
-#define __NR_munlock			1158
-#define __NR_munlockall			1159
-#define __NR_sched_getparam		1160
-#define __NR_sched_setparam		1161
-#define __NR_sched_getscheduler		1162
-#define __NR_sched_setscheduler		1163
-#define __NR_sched_yield		1164
-#define __NR_sched_get_priority_max	1165
-#define __NR_sched_get_priority_min	1166
-#define __NR_sched_rr_get_interval	1167
-#define __NR_nanosleep			1168
-#define __NR_nfsservctl			1169
-#define __NR_prctl			1170
-/* 1171 is reserved for backwards compatibility with old __NR_getpagesize */
-#define __NR_mmap2			1172
-#define __NR_pciconfig_read		1173
-#define __NR_pciconfig_write		1174
-#define __NR_perfmonctl			1175
-#define __NR_sigaltstack		1176
-#define __NR_rt_sigaction		1177
-#define __NR_rt_sigpending		1178
-#define __NR_rt_sigprocmask		1179
-#define __NR_rt_sigqueueinfo		1180
-#define __NR_rt_sigreturn		1181
-#define __NR_rt_sigsuspend		1182
-#define __NR_rt_sigtimedwait		1183
-#define __NR_getcwd			1184
-#define __NR_capget			1185
-#define __NR_capset			1186
-#define __NR_sendfile			1187
-#define __NR_getpmsg			1188
-#define __NR_putpmsg			1189
-#define __NR_socket			1190
-#define __NR_bind			1191
-#define __NR_connect			1192
-#define __NR_listen			1193
-#define __NR_accept			1194
-#define __NR_getsockname		1195
-#define __NR_getpeername		1196
-#define __NR_socketpair			1197
-#define __NR_send			1198
-#define __NR_sendto			1199
-#define __NR_recv			1200
-#define __NR_recvfrom			1201
-#define __NR_shutdown			1202
-#define __NR_setsockopt			1203
-#define __NR_getsockopt			1204
-#define __NR_sendmsg			1205
-#define __NR_recvmsg			1206
-#define __NR_pivot_root			1207
-#define __NR_mincore			1208
-#define __NR_madvise			1209
-#define __NR_stat			1210
-#define __NR_lstat			1211
-#define __NR_fstat			1212
-#define __NR_clone2			1213
-#define __NR_getdents64			1214
-#define __NR_getunwind			1215
-#define __NR_readahead			1216
-#define __NR_setxattr			1217
-#define __NR_lsetxattr			1218
-#define __NR_fsetxattr			1219
-#define __NR_getxattr			1220
-#define __NR_lgetxattr			1221
-#define __NR_fgetxattr			1222
-#define __NR_listxattr			1223
-#define __NR_llistxattr			1224
-#define __NR_flistxattr			1225
-#define __NR_removexattr		1226
-#define __NR_lremovexattr		1227
-#define __NR_fremovexattr		1228
-#define __NR_tkill			1229
-#define __NR_futex			1230
-#define __NR_sched_setaffinity		1231
-#define __NR_sched_getaffinity		1232
-#define __NR_set_tid_address		1233
-#define __NR_fadvise64			1234
-#define __NR_tgkill			1235
-#define __NR_exit_group			1236
-#define __NR_lookup_dcookie		1237
-#define __NR_io_setup			1238
-#define __NR_io_destroy			1239
-#define __NR_io_getevents		1240
-#define __NR_io_submit			1241
-#define __NR_io_cancel			1242
-#define __NR_epoll_create		1243
-#define __NR_epoll_ctl			1244
-#define __NR_epoll_wait			1245
-#define __NR_restart_syscall		1246
-#define __NR_semtimedop			1247
-#define __NR_timer_create		1248
-#define __NR_timer_settime		1249
-#define __NR_timer_gettime		1250
-#define __NR_timer_getoverrun		1251
-#define __NR_timer_delete		1252
-#define __NR_clock_settime		1253
-#define __NR_clock_gettime		1254
-#define __NR_clock_getres		1255
-#define __NR_clock_nanosleep		1256
-#define __NR_fstatfs64			1257
-#define __NR_statfs64			1258
-#define __NR_mbind			1259
-#define __NR_get_mempolicy		1260
-#define __NR_set_mempolicy		1261
-#define __NR_mq_open			1262
-#define __NR_mq_unlink			1263
-#define __NR_mq_timedsend		1264
-#define __NR_mq_timedreceive		1265
-#define __NR_mq_notify			1266
-#define __NR_mq_getsetattr		1267
-#define __NR_kexec_load			1268
-#define __NR_vserver			1269
-#define __NR_waitid			1270
-#define __NR_add_key			1271
-#define __NR_request_key		1272
-#define __NR_keyctl			1273
-#define __NR_ioprio_set			1274
-#define __NR_ioprio_get			1275
-#define __NR_move_pages			1276
-#define __NR_inotify_init		1277
-#define __NR_inotify_add_watch		1278
-#define __NR_inotify_rm_watch		1279
-#define __NR_migrate_pages		1280
-#define __NR_openat			1281
-#define __NR_mkdirat			1282
-#define __NR_mknodat			1283
-#define __NR_fchownat			1284
-#define __NR_futimesat			1285
-#define __NR_newfstatat			1286
-#define __NR_unlinkat			1287
-#define __NR_renameat			1288
-#define __NR_linkat			1289
-#define __NR_symlinkat			1290
-#define __NR_readlinkat			1291
-#define __NR_fchmodat			1292
-#define __NR_faccessat			1293
-#define __NR_pselect6			1294
-#define __NR_ppoll			1295
-#define __NR_unshare			1296
-#define __NR_splice			1297
-#define __NR_set_robust_list		1298
-#define __NR_get_robust_list		1299
-#define __NR_sync_file_range		1300
-#define __NR_tee			1301
-#define __NR_vmsplice			1302
-#define __NR_fallocate			1303
-#define __NR_getcpu			1304
-#define __NR_epoll_pwait		1305
-#define __NR_utimensat			1306
-#define __NR_signalfd			1307
-#define __NR_timerfd			1308
-#define __NR_eventfd			1309
-#define __NR_timerfd_create		1310
-#define __NR_timerfd_settime		1311
-#define __NR_timerfd_gettime		1312
-#define __NR_signalfd4			1313
-#define __NR_eventfd2			1314
-#define __NR_epoll_create1		1315
-#define __NR_dup3			1316
-#define __NR_pipe2			1317
-#define __NR_inotify_init1		1318
-#define __NR_preadv			1319
-#define __NR_pwritev			1320
-#define __NR_rt_tgsigqueueinfo		1321
-#define __NR_recvmmsg			1322
-#define __NR_fanotify_init		1323
-#define __NR_fanotify_mark		1324
-#define __NR_prlimit64			1325
-#define __NR_name_to_handle_at		1326
-#define __NR_open_by_handle_at  	1327
-#define __NR_clock_adjtime		1328
-#define __NR_syncfs			1329
-#define __NR_setns			1330
-#define __NR_sendmmsg			1331
-#define __NR_process_vm_readv		1332
-#define __NR_process_vm_writev		1333
-#define __NR_accept4			1334
-
-#ifdef __KERNEL__
 
 
 #define NR_syscalls			311 /* length of syscall table */
@@ -382,5 +65,4 @@
 #define cond_syscall(x) asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
 
 #endif /* !__ASSEMBLY__ */
-#endif /* __KERNEL__ */
 #endif /* _ASM_IA64_UNISTD_H */
diff --git a/arch/ia64/include/asm/ustack.h b/arch/ia64/include/asm/ustack.h
index 504167c..b275401 100644
--- a/arch/ia64/include/asm/ustack.h
+++ b/arch/ia64/include/asm/ustack.h
@@ -1,20 +1,11 @@
 #ifndef _ASM_IA64_USTACK_H
 #define _ASM_IA64_USTACK_H
 
-/*
- * Constants for the user stack size
- */
-
-#ifdef __KERNEL__
 #include <asm/page.h>
+#include <uapi/asm/ustack.h>
 
 /* The absolute hard limit for stack size is 1/2 of the mappable space in the region */
 #define MAX_USER_STACK_SIZE	(RGN_MAP_LIMIT/2)
 #define STACK_TOP		(0x6000000000000000UL + RGN_MAP_LIMIT)
 #define STACK_TOP_MAX		STACK_TOP
-#endif
-
-/* Make a default stack size of 2GiB */
-#define DEFAULT_USER_STACK_SIZE	(1UL << 31)
-
 #endif /* _ASM_IA64_USTACK_H */
diff --git a/arch/ia64/include/uapi/asm/Kbuild b/arch/ia64/include/uapi/asm/Kbuild
index baebb3d..30cafac 100644
--- a/arch/ia64/include/uapi/asm/Kbuild
+++ b/arch/ia64/include/uapi/asm/Kbuild
@@ -1,3 +1,48 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += break.h
+header-y += byteorder.h
+header-y += cmpxchg.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += fpu.h
+header-y += gcc_intrin.h
+header-y += ia64regs.h
+header-y += intel_intrin.h
+header-y += intrinsics.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += kvm.h
+header-y += kvm_para.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += param.h
+header-y += perfmon.h
+header-y += perfmon_default_smpl.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ptrace.h
+header-y += ptrace_offsets.h
+header-y += resource.h
+header-y += rse.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += ucontext.h
+header-y += unistd.h
+header-y += ustack.h
diff --git a/arch/ia64/include/asm/auxvec.h b/arch/ia64/include/uapi/asm/auxvec.h
similarity index 100%
rename from arch/ia64/include/asm/auxvec.h
rename to arch/ia64/include/uapi/asm/auxvec.h
diff --git a/arch/ia64/include/asm/bitsperlong.h b/arch/ia64/include/uapi/asm/bitsperlong.h
similarity index 100%
rename from arch/ia64/include/asm/bitsperlong.h
rename to arch/ia64/include/uapi/asm/bitsperlong.h
diff --git a/arch/ia64/include/asm/break.h b/arch/ia64/include/uapi/asm/break.h
similarity index 100%
rename from arch/ia64/include/asm/break.h
rename to arch/ia64/include/uapi/asm/break.h
diff --git a/arch/ia64/include/asm/byteorder.h b/arch/ia64/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/ia64/include/asm/byteorder.h
rename to arch/ia64/include/uapi/asm/byteorder.h
diff --git a/arch/ia64/include/asm/cmpxchg.h b/arch/ia64/include/uapi/asm/cmpxchg.h
similarity index 100%
rename from arch/ia64/include/asm/cmpxchg.h
rename to arch/ia64/include/uapi/asm/cmpxchg.h
diff --git a/arch/ia64/include/asm/errno.h b/arch/ia64/include/uapi/asm/errno.h
similarity index 100%
rename from arch/ia64/include/asm/errno.h
rename to arch/ia64/include/uapi/asm/errno.h
diff --git a/arch/ia64/include/asm/fcntl.h b/arch/ia64/include/uapi/asm/fcntl.h
similarity index 100%
rename from arch/ia64/include/asm/fcntl.h
rename to arch/ia64/include/uapi/asm/fcntl.h
diff --git a/arch/ia64/include/asm/fpu.h b/arch/ia64/include/uapi/asm/fpu.h
similarity index 100%
rename from arch/ia64/include/asm/fpu.h
rename to arch/ia64/include/uapi/asm/fpu.h
diff --git a/arch/ia64/include/uapi/asm/gcc_intrin.h b/arch/ia64/include/uapi/asm/gcc_intrin.h
new file mode 100644
index 0000000..61d0d01
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/gcc_intrin.h
@@ -0,0 +1,618 @@
+/*
+ *
+ * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
+ * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+#ifndef _UAPI_ASM_IA64_GCC_INTRIN_H
+#define _UAPI_ASM_IA64_GCC_INTRIN_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* define this macro to get some asm stmts included in 'c' files */
+#define ASM_SUPPORTED
+
+/* Optimization barrier */
+/* The "volatile" is due to gcc bugs */
+#define ia64_barrier()	asm volatile ("":::"memory")
+
+#define ia64_stop()	asm volatile (";;"::)
+
+#define ia64_invala_gr(regnum)	asm volatile ("invala.e r%0" :: "i"(regnum))
+
+#define ia64_invala_fr(regnum)	asm volatile ("invala.e f%0" :: "i"(regnum))
+
+#define ia64_flushrs() asm volatile ("flushrs;;":::"memory")
+
+#define ia64_loadrs() asm volatile ("loadrs;;":::"memory")
+
+extern void ia64_bad_param_for_setreg (void);
+extern void ia64_bad_param_for_getreg (void);
+
+
+#define ia64_native_setreg(regnum, val)						\
+({										\
+	switch (regnum) {							\
+	    case _IA64_REG_PSR_L:						\
+		    asm volatile ("mov psr.l=%0" :: "r"(val) : "memory");	\
+		    break;							\
+	    case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
+		    asm volatile ("mov ar%0=%1" ::				\
+		    			  "i" (regnum - _IA64_REG_AR_KR0),	\
+					  "r"(val): "memory");			\
+		    break;							\
+	    case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:			\
+		    asm volatile ("mov cr%0=%1" ::				\
+				          "i" (regnum - _IA64_REG_CR_DCR),	\
+					  "r"(val): "memory" );			\
+		    break;							\
+	    case _IA64_REG_SP:							\
+		    asm volatile ("mov r12=%0" ::				\
+			    		  "r"(val): "memory");			\
+		    break;							\
+	    case _IA64_REG_GP:							\
+		    asm volatile ("mov gp=%0" :: "r"(val) : "memory");		\
+		break;								\
+	    default:								\
+		    ia64_bad_param_for_setreg();				\
+		    break;							\
+	}									\
+})
+
+#define ia64_native_getreg(regnum)						\
+({										\
+	__u64 ia64_intri_res;							\
+										\
+	switch (regnum) {							\
+	case _IA64_REG_GP:							\
+		asm volatile ("mov %0=gp" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_IP:							\
+		asm volatile ("mov %0=ip" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_PSR:							\
+		asm volatile ("mov %0=psr" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_TP:	/* for current() */				\
+		ia64_intri_res = ia64_r13;					\
+		break;								\
+	case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
+		asm volatile ("mov %0=ar%1" : "=r" (ia64_intri_res)		\
+				      : "i"(regnum - _IA64_REG_AR_KR0));	\
+		break;								\
+	case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:				\
+		asm volatile ("mov %0=cr%1" : "=r" (ia64_intri_res)		\
+				      : "i" (regnum - _IA64_REG_CR_DCR));	\
+		break;								\
+	case _IA64_REG_SP:							\
+		asm volatile ("mov %0=sp" : "=r" (ia64_intri_res));		\
+		break;								\
+	default:								\
+		ia64_bad_param_for_getreg();					\
+		break;								\
+	}									\
+	ia64_intri_res;								\
+})
+
+#define ia64_hint_pause 0
+
+#define ia64_hint(mode)						\
+({								\
+	switch (mode) {						\
+	case ia64_hint_pause:					\
+		asm volatile ("hint @pause" ::: "memory");	\
+		break;						\
+	}							\
+})
+
+
+/* Integer values for mux1 instruction */
+#define ia64_mux1_brcst 0
+#define ia64_mux1_mix   8
+#define ia64_mux1_shuf  9
+#define ia64_mux1_alt  10
+#define ia64_mux1_rev  11
+
+#define ia64_mux1(x, mode)							\
+({										\
+	__u64 ia64_intri_res;							\
+										\
+	switch (mode) {								\
+	case ia64_mux1_brcst:							\
+		asm ("mux1 %0=%1,@brcst" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_mix:							\
+		asm ("mux1 %0=%1,@mix" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_shuf:							\
+		asm ("mux1 %0=%1,@shuf" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_alt:							\
+		asm ("mux1 %0=%1,@alt" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_rev:							\
+		asm ("mux1 %0=%1,@rev" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	}									\
+	ia64_intri_res;								\
+})
+
+#if __GNUC__ >= 4 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
+# define ia64_popcnt(x)		__builtin_popcountl(x)
+#else
+# define ia64_popcnt(x)						\
+  ({								\
+	__u64 ia64_intri_res;					\
+	asm ("popcnt %0=%1" : "=r" (ia64_intri_res) : "r" (x));	\
+								\
+	ia64_intri_res;						\
+  })
+#endif
+
+#define ia64_getf_exp(x)					\
+({								\
+	long ia64_intri_res;					\
+								\
+	asm ("getf.exp %0=%1" : "=r"(ia64_intri_res) : "f"(x));	\
+								\
+	ia64_intri_res;						\
+})
+
+#define ia64_shrp(a, b, count)								\
+({											\
+	__u64 ia64_intri_res;								\
+	asm ("shrp %0=%1,%2,%3" : "=r"(ia64_intri_res) : "r"(a), "r"(b), "i"(count));	\
+	ia64_intri_res;									\
+})
+
+#define ia64_ldfs(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfs %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldfd(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfd %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldfe(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfe %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldf8(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldf8 %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldf_fill(regnum, x)				\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_st4_rel_nta(m, val)					\
+({									\
+	asm volatile ("st4.rel.nta [%0] = %1\n\t" :: "r"(m), "r"(val));	\
+})
+
+#define ia64_stfs(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfs [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stfd(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfd [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stfe(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfe [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stf8(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stf8 [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stf_spill(x, regnum)						\
+({										\
+	register double __f__ asm ("f"#regnum);					\
+	asm volatile ("stf.spill [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_fetchadd4_acq(p, inc)						\
+({										\
+										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd4.acq %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd4_rel(p, inc)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd4.rel %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd8_acq(p, inc)						\
+({										\
+										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd8.acq %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd8_rel(p, inc)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd8.rel %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_xchg1(ptr,x)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("xchg1 %0=[%1],%2"					\
+		      : "=r" (ia64_intri_res) : "r" (ptr), "r" (x) : "memory");	\
+	ia64_intri_res;								\
+})
+
+#define ia64_xchg2(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg2 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_xchg4(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg4 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_xchg8(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg8 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_cmpxchg1_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg1.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg1_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg1.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg2_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg2.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg2_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+											\
+	asm volatile ("cmpxchg2.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg4_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg4.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg4_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg4.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg8_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg8.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg8_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+											\
+	asm volatile ("cmpxchg8.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_mf()	asm volatile ("mf" ::: "memory")
+#define ia64_mfa()	asm volatile ("mf.a" ::: "memory")
+
+#define ia64_invala() asm volatile ("invala" ::: "memory")
+
+#define ia64_native_thash(addr)							\
+({										\
+	unsigned long ia64_intri_res;						\
+	asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_srlz_i()	asm volatile (";; srlz.i ;;" ::: "memory")
+#define ia64_srlz_d()	asm volatile (";; srlz.d" ::: "memory");
+
+#ifdef HAVE_SERIALIZE_DIRECTIVE
+# define ia64_dv_serialize_data()		asm volatile (".serialize.data");
+# define ia64_dv_serialize_instruction()	asm volatile (".serialize.instruction");
+#else
+# define ia64_dv_serialize_data()
+# define ia64_dv_serialize_instruction()
+#endif
+
+#define ia64_nop(x)	asm volatile ("nop %0"::"i"(x));
+
+#define ia64_itci(addr)	asm volatile ("itc.i %0;;" :: "r"(addr) : "memory")
+
+#define ia64_itcd(addr)	asm volatile ("itc.d %0;;" :: "r"(addr) : "memory")
+
+
+#define ia64_itri(trnum, addr) asm volatile ("itr.i itr[%0]=%1"				\
+					     :: "r"(trnum), "r"(addr) : "memory")
+
+#define ia64_itrd(trnum, addr) asm volatile ("itr.d dtr[%0]=%1"				\
+					     :: "r"(trnum), "r"(addr) : "memory")
+
+#define ia64_tpa(addr)								\
+({										\
+	unsigned long ia64_pa;							\
+	asm volatile ("tpa %0 = %1" : "=r"(ia64_pa) : "r"(addr) : "memory");	\
+	ia64_pa;								\
+})
+
+#define __ia64_set_dbr(index, val)						\
+	asm volatile ("mov dbr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_ibr(index, val)						\
+	asm volatile ("mov ibr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pkr(index, val)						\
+	asm volatile ("mov pkr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pmc(index, val)						\
+	asm volatile ("mov pmc[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pmd(index, val)						\
+	asm volatile ("mov pmd[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_native_set_rr(index, val)							\
+	asm volatile ("mov rr[%0]=%1" :: "r"(index), "r"(val) : "memory");
+
+#define ia64_native_get_cpuid(index)							\
+({											\
+	unsigned long ia64_intri_res;							\
+	asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index));	\
+	ia64_intri_res;									\
+})
+
+#define __ia64_get_dbr(index)							\
+({										\
+	unsigned long ia64_intri_res;						\
+	asm volatile ("mov %0=dbr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_ibr(index)							\
+({										\
+	unsigned long ia64_intri_res;						\
+	asm volatile ("mov %0=ibr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_pkr(index)							\
+({										\
+	unsigned long ia64_intri_res;						\
+	asm volatile ("mov %0=pkr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_pmc(index)							\
+({										\
+	unsigned long ia64_intri_res;						\
+	asm volatile ("mov %0=pmc[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+
+#define ia64_native_get_pmd(index)						\
+({										\
+	unsigned long ia64_intri_res;						\
+	asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_native_get_rr(index)						\
+({										\
+	unsigned long ia64_intri_res;						\
+	asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_native_fc(addr)	asm volatile ("fc %0" :: "r"(addr) : "memory")
+
+
+#define ia64_sync_i()	asm volatile (";; sync.i" ::: "memory")
+
+#define ia64_native_ssm(mask)	asm volatile ("ssm %0":: "i"((mask)) : "memory")
+#define ia64_native_rsm(mask)	asm volatile ("rsm %0":: "i"((mask)) : "memory")
+#define ia64_sum(mask)	asm volatile ("sum %0":: "i"((mask)) : "memory")
+#define ia64_rum(mask)	asm volatile ("rum %0":: "i"((mask)) : "memory")
+
+#define ia64_ptce(addr)	asm volatile ("ptc.e %0" :: "r"(addr))
+
+#define ia64_native_ptcga(addr, size)						\
+do {										\
+	asm volatile ("ptc.ga %0,%1" :: "r"(addr), "r"(size) : "memory");	\
+	ia64_dv_serialize_data();						\
+} while (0)
+
+#define ia64_ptcl(addr, size)							\
+do {										\
+	asm volatile ("ptc.l %0,%1" :: "r"(addr), "r"(size) : "memory");	\
+	ia64_dv_serialize_data();						\
+} while (0)
+
+#define ia64_ptri(addr, size)						\
+	asm volatile ("ptr.i %0,%1" :: "r"(addr), "r"(size) : "memory")
+
+#define ia64_ptrd(addr, size)						\
+	asm volatile ("ptr.d %0,%1" :: "r"(addr), "r"(size) : "memory")
+
+#define ia64_ttag(addr)							\
+({									  \
+	__u64 ia64_intri_res;						   \
+	asm volatile ("ttag %0=%1" : "=r"(ia64_intri_res) : "r" (addr));   \
+	ia64_intri_res;							 \
+})
+
+
+/* Values for lfhint in ia64_lfetch and ia64_lfetch_fault */
+
+#define ia64_lfhint_none   0
+#define ia64_lfhint_nt1    1
+#define ia64_lfhint_nt2    2
+#define ia64_lfhint_nta    3
+
+#define ia64_lfetch(lfhint, y)					\
+({								\
+        switch (lfhint) {					\
+        case ia64_lfhint_none:					\
+                asm volatile ("lfetch [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nt1:					\
+                asm volatile ("lfetch.nt1 [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nt2:					\
+                asm volatile ("lfetch.nt2 [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nta:					\
+                asm volatile ("lfetch.nta [%0]" : : "r"(y));	\
+                break;						\
+        }							\
+})
+
+#define ia64_lfetch_excl(lfhint, y)					\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.excl [%0]" :: "r"(y));		\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.excl.nt1 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.excl.nt2 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.excl.nta [%0]" :: "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_lfetch_fault(lfhint, y)					\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.fault [%0]" : : "r"(y));		\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.fault.nt1 [%0]" : : "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.fault.nt2 [%0]" : : "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.fault.nta [%0]" : : "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_lfetch_fault_excl(lfhint, y)				\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.fault.excl [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.fault.excl.nt1 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.fault.excl.nt2 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.fault.excl.nta [%0]" :: "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_native_intrin_local_irq_restore(x)			\
+do {								\
+	asm volatile (";;   cmp.ne p6,p7=%0,r0;;"		\
+		      "(p6) ssm psr.i;"				\
+		      "(p7) rsm psr.i;;"			\
+		      "(p6) srlz.d"				\
+		      :: "r"((x)) : "p6", "p7", "memory");	\
+} while (0)
+
+#endif /* _UAPI_ASM_IA64_GCC_INTRIN_H */
diff --git a/arch/ia64/include/asm/ia64regs.h b/arch/ia64/include/uapi/asm/ia64regs.h
similarity index 100%
rename from arch/ia64/include/asm/ia64regs.h
rename to arch/ia64/include/uapi/asm/ia64regs.h
diff --git a/arch/ia64/include/asm/intel_intrin.h b/arch/ia64/include/uapi/asm/intel_intrin.h
similarity index 100%
rename from arch/ia64/include/asm/intel_intrin.h
rename to arch/ia64/include/uapi/asm/intel_intrin.h
diff --git a/arch/ia64/include/uapi/asm/intrinsics.h b/arch/ia64/include/uapi/asm/intrinsics.h
new file mode 100644
index 0000000..5829978
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/intrinsics.h
@@ -0,0 +1,124 @@
+/*
+ * Compiler-dependent intrinsics.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _UAPI_ASM_IA64_INTRINSICS_H
+#define _UAPI_ASM_IA64_INTRINSICS_H
+
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+/* include compiler specific intrinsics */
+#include <asm/ia64regs.h>
+#ifdef __INTEL_COMPILER
+# include <asm/intel_intrin.h>
+#else
+# include <asm/gcc_intrin.h>
+#endif
+#include <asm/cmpxchg.h>
+
+#define ia64_native_get_psr_i()	(ia64_native_getreg(_IA64_REG_PSR) & IA64_PSR_I)
+
+#define ia64_native_set_rr0_to_rr4(val0, val1, val2, val3, val4)	\
+do {									\
+	ia64_native_set_rr(0x0000000000000000UL, (val0));		\
+	ia64_native_set_rr(0x2000000000000000UL, (val1));		\
+	ia64_native_set_rr(0x4000000000000000UL, (val2));		\
+	ia64_native_set_rr(0x6000000000000000UL, (val3));		\
+	ia64_native_set_rr(0x8000000000000000UL, (val4));		\
+} while (0)
+
+/*
+ * Force an unresolved reference if someone tries to use
+ * ia64_fetch_and_add() with a bad value.
+ */
+extern unsigned long __bad_size_for_ia64_fetch_and_add (void);
+extern unsigned long __bad_increment_for_ia64_fetch_and_add (void);
+
+#define IA64_FETCHADD(tmp,v,n,sz,sem)						\
+({										\
+	switch (sz) {								\
+	      case 4:								\
+	        tmp = ia64_fetchadd4_##sem((unsigned int *) v, n);		\
+		break;								\
+										\
+	      case 8:								\
+	        tmp = ia64_fetchadd8_##sem((unsigned long *) v, n);		\
+		break;								\
+										\
+	      default:								\
+		__bad_size_for_ia64_fetch_and_add();				\
+	}									\
+})
+
+#define ia64_fetchadd(i,v,sem)								\
+({											\
+	__u64 _tmp;									\
+	volatile __typeof__(*(v)) *_v = (v);						\
+	/* Can't use a switch () here: gcc isn't always smart enough for that... */	\
+	if ((i) == -16)									\
+		IA64_FETCHADD(_tmp, _v, -16, sizeof(*(v)), sem);			\
+	else if ((i) == -8)								\
+		IA64_FETCHADD(_tmp, _v, -8, sizeof(*(v)), sem);				\
+	else if ((i) == -4)								\
+		IA64_FETCHADD(_tmp, _v, -4, sizeof(*(v)), sem);				\
+	else if ((i) == -1)								\
+		IA64_FETCHADD(_tmp, _v, -1, sizeof(*(v)), sem);				\
+	else if ((i) == 1)								\
+		IA64_FETCHADD(_tmp, _v, 1, sizeof(*(v)), sem);				\
+	else if ((i) == 4)								\
+		IA64_FETCHADD(_tmp, _v, 4, sizeof(*(v)), sem);				\
+	else if ((i) == 8)								\
+		IA64_FETCHADD(_tmp, _v, 8, sizeof(*(v)), sem);				\
+	else if ((i) == 16)								\
+		IA64_FETCHADD(_tmp, _v, 16, sizeof(*(v)), sem);				\
+	else										\
+		_tmp = __bad_increment_for_ia64_fetch_and_add();			\
+	(__typeof__(*(v))) (_tmp);	/* return old value */				\
+})
+
+#define ia64_fetch_and_add(i,v)	(ia64_fetchadd(i, v, rel) + (i)) /* return new value */
+
+#endif
+
+
+#ifndef __ASSEMBLY__
+
+#define IA64_INTRINSIC_API(name)	ia64_native_ ## name
+#define IA64_INTRINSIC_MACRO(name)	ia64_native_ ## name
+
+
+/************************************************/
+/* Instructions paravirtualized for correctness */
+/************************************************/
+/* fc, thash, get_cpuid, get_pmd, get_eflags, set_eflags */
+/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag"
+ * is not currently used (though it may be in a long-format VHPT system!)
+ */
+#define ia64_fc				IA64_INTRINSIC_API(fc)
+#define ia64_thash			IA64_INTRINSIC_API(thash)
+#define ia64_get_cpuid			IA64_INTRINSIC_API(get_cpuid)
+#define ia64_get_pmd			IA64_INTRINSIC_API(get_pmd)
+
+
+/************************************************/
+/* Instructions paravirtualized for performance */
+/************************************************/
+#define ia64_ssm			IA64_INTRINSIC_MACRO(ssm)
+#define ia64_rsm			IA64_INTRINSIC_MACRO(rsm)
+#define ia64_getreg			IA64_INTRINSIC_MACRO(getreg)
+#define ia64_setreg			IA64_INTRINSIC_API(setreg)
+#define ia64_set_rr			IA64_INTRINSIC_API(set_rr)
+#define ia64_get_rr			IA64_INTRINSIC_API(get_rr)
+#define ia64_ptcga			IA64_INTRINSIC_API(ptcga)
+#define ia64_get_psr_i			IA64_INTRINSIC_API(get_psr_i)
+#define ia64_intrin_local_irq_restore	\
+	IA64_INTRINSIC_API(intrin_local_irq_restore)
+#define ia64_set_rr0_to_rr4		IA64_INTRINSIC_API(set_rr0_to_rr4)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _UAPI_ASM_IA64_INTRINSICS_H */
diff --git a/arch/ia64/include/asm/ioctl.h b/arch/ia64/include/uapi/asm/ioctl.h
similarity index 100%
rename from arch/ia64/include/asm/ioctl.h
rename to arch/ia64/include/uapi/asm/ioctl.h
diff --git a/arch/ia64/include/asm/ioctls.h b/arch/ia64/include/uapi/asm/ioctls.h
similarity index 100%
rename from arch/ia64/include/asm/ioctls.h
rename to arch/ia64/include/uapi/asm/ioctls.h
diff --git a/arch/ia64/include/asm/ipcbuf.h b/arch/ia64/include/uapi/asm/ipcbuf.h
similarity index 100%
rename from arch/ia64/include/asm/ipcbuf.h
rename to arch/ia64/include/uapi/asm/ipcbuf.h
diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/uapi/asm/kvm.h
similarity index 100%
rename from arch/ia64/include/asm/kvm.h
rename to arch/ia64/include/uapi/asm/kvm.h
diff --git a/arch/ia64/include/uapi/asm/kvm_para.h b/arch/ia64/include/uapi/asm/kvm_para.h
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/kvm_para.h
diff --git a/arch/ia64/include/uapi/asm/mman.h b/arch/ia64/include/uapi/asm/mman.h
new file mode 100644
index 0000000..8740819
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/mman.h
@@ -0,0 +1,16 @@
+/*
+ * Based on <asm-i386/mman.h>.
+ *
+ * Modified 1998-2000, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+#ifndef _UAPI_ASM_IA64_MMAN_H
+#define _UAPI_ASM_IA64_MMAN_H
+
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSUP	0x0200		/* register stack-like segment */
+
+
+#endif /* _UAPI_ASM_IA64_MMAN_H */
diff --git a/arch/ia64/include/asm/msgbuf.h b/arch/ia64/include/uapi/asm/msgbuf.h
similarity index 100%
rename from arch/ia64/include/asm/msgbuf.h
rename to arch/ia64/include/uapi/asm/msgbuf.h
diff --git a/arch/ia64/include/uapi/asm/param.h b/arch/ia64/include/uapi/asm/param.h
new file mode 100644
index 0000000..d7da41d
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/param.h
@@ -0,0 +1,29 @@
+/*
+ * Fundamental kernel parameters.
+ *
+ * Based on <asm-i386/param.h>.
+ *
+ * Modified 1998, 1999, 2002-2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+#ifndef _UAPI_ASM_IA64_PARAM_H
+#define _UAPI_ASM_IA64_PARAM_H
+
+
+#define EXEC_PAGESIZE	65536
+
+#ifndef NOGROUP
+# define NOGROUP	(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#ifndef __KERNEL__
+   /*
+    * Technically, this is wrong, but some old apps still refer to it.  The proper way to
+    * get the HZ value is via sysconf(_SC_CLK_TCK).
+    */
+# define HZ 1024
+#endif
+
+#endif /* _UAPI_ASM_IA64_PARAM_H */
diff --git a/arch/ia64/include/uapi/asm/perfmon.h b/arch/ia64/include/uapi/asm/perfmon.h
new file mode 100644
index 0000000..1a10a2d
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/perfmon.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2001-2003 Hewlett-Packard Co
+ *               Stephane Eranian <eranian@hpl.hp.com>
+ */
+
+#ifndef _UAPI_ASM_IA64_PERFMON_H
+#define _UAPI_ASM_IA64_PERFMON_H
+
+/*
+ * perfmon commands supported on all CPU models
+ */
+#define PFM_WRITE_PMCS		0x01
+#define PFM_WRITE_PMDS		0x02
+#define PFM_READ_PMDS		0x03
+#define PFM_STOP		0x04
+#define PFM_START		0x05
+#define PFM_ENABLE		0x06 /* obsolete */
+#define PFM_DISABLE		0x07 /* obsolete */
+#define PFM_CREATE_CONTEXT	0x08
+#define PFM_DESTROY_CONTEXT	0x09 /* obsolete use close() */
+#define PFM_RESTART		0x0a
+#define PFM_PROTECT_CONTEXT	0x0b /* obsolete */
+#define PFM_GET_FEATURES	0x0c
+#define PFM_DEBUG		0x0d
+#define PFM_UNPROTECT_CONTEXT	0x0e /* obsolete */
+#define PFM_GET_PMC_RESET_VAL	0x0f
+#define PFM_LOAD_CONTEXT	0x10
+#define PFM_UNLOAD_CONTEXT	0x11
+
+/*
+ * PMU model specific commands (may not be supported on all PMU models)
+ */
+#define PFM_WRITE_IBRS		0x20
+#define PFM_WRITE_DBRS		0x21
+
+/*
+ * context flags
+ */
+#define PFM_FL_NOTIFY_BLOCK    	 0x01	/* block task on user level notifications */
+#define PFM_FL_SYSTEM_WIDE	 0x02	/* create a system wide context */
+#define PFM_FL_OVFL_NO_MSG	 0x80   /* do not post overflow/end messages for notification */
+
+/*
+ * event set flags
+ */
+#define PFM_SETFL_EXCL_IDLE      0x01   /* exclude idle task (syswide only) XXX: DO NOT USE YET */
+
+/*
+ * PMC flags
+ */
+#define PFM_REGFL_OVFL_NOTIFY	0x1	/* send notification on overflow */
+#define PFM_REGFL_RANDOM	0x2	/* randomize sampling interval   */
+
+/*
+ * PMD/PMC/IBR/DBR return flags (ignored on input)
+ *
+ * Those flags are used on output and must be checked in case EAGAIN is returned
+ * by any of the calls using a pfarg_reg_t or pfarg_dbreg_t structure.
+ */
+#define PFM_REG_RETFL_NOTAVAIL	(1UL<<31) /* set if register is implemented but not available */
+#define PFM_REG_RETFL_EINVAL	(1UL<<30) /* set if register entry is invalid */
+#define PFM_REG_RETFL_MASK	(PFM_REG_RETFL_NOTAVAIL|PFM_REG_RETFL_EINVAL)
+
+#define PFM_REG_HAS_ERROR(flag)	(((flag) & PFM_REG_RETFL_MASK) != 0)
+
+typedef unsigned char pfm_uuid_t[16];	/* custom sampling buffer identifier type */
+
+/*
+ * Request structure used to define a context
+ */
+typedef struct {
+	pfm_uuid_t     ctx_smpl_buf_id;	 /* which buffer format to use (if needed) */
+	unsigned long  ctx_flags;	 /* noblock/block */
+	unsigned short ctx_nextra_sets;	 /* number of extra event sets (you always get 1) */
+	unsigned short ctx_reserved1;	 /* for future use */
+	int	       ctx_fd;		 /* return arg: unique identification for context */
+	void	       *ctx_smpl_vaddr;	 /* return arg: virtual address of sampling buffer, is used */
+	unsigned long  ctx_reserved2[11];/* for future use */
+} pfarg_context_t;
+
+/*
+ * Request structure used to write/read a PMC or PMD
+ */
+typedef struct {
+	unsigned int	reg_num;	   /* which register */
+	unsigned short	reg_set;	   /* event set for this register */
+	unsigned short	reg_reserved1;	   /* for future use */
+
+	unsigned long	reg_value;	   /* initial pmc/pmd value */
+	unsigned long	reg_flags;	   /* input: pmc/pmd flags, return: reg error */
+
+	unsigned long	reg_long_reset;	   /* reset after buffer overflow notification */
+	unsigned long	reg_short_reset;   /* reset after counter overflow */
+
+	unsigned long	reg_reset_pmds[4]; /* which other counters to reset on overflow */
+	unsigned long	reg_random_seed;   /* seed value when randomization is used */
+	unsigned long	reg_random_mask;   /* bitmask used to limit random value */
+	unsigned long   reg_last_reset_val;/* return: PMD last reset value */
+
+	unsigned long	reg_smpl_pmds[4];  /* which pmds are accessed when PMC overflows */
+	unsigned long	reg_smpl_eventid;  /* opaque sampling event identifier */
+
+	unsigned long   reg_reserved2[3];   /* for future use */
+} pfarg_reg_t;
+
+typedef struct {
+	unsigned int	dbreg_num;		/* which debug register */
+	unsigned short	dbreg_set;		/* event set for this register */
+	unsigned short	dbreg_reserved1;	/* for future use */
+	unsigned long	dbreg_value;		/* value for debug register */
+	unsigned long	dbreg_flags;		/* return: dbreg error */
+	unsigned long	dbreg_reserved2[1];	/* for future use */
+} pfarg_dbreg_t;
+
+typedef struct {
+	unsigned int	ft_version;	/* perfmon: major [16-31], minor [0-15] */
+	unsigned int	ft_reserved;	/* reserved for future use */
+	unsigned long	reserved[4];	/* for future use */
+} pfarg_features_t;
+
+typedef struct {
+	pid_t		load_pid;	   /* process to load the context into */
+	unsigned short	load_set;	   /* first event set to load */
+	unsigned short	load_reserved1;	   /* for future use */
+	unsigned long	load_reserved2[3]; /* for future use */
+} pfarg_load_t;
+
+typedef struct {
+	int		msg_type;		/* generic message header */
+	int		msg_ctx_fd;		/* generic message header */
+	unsigned long	msg_ovfl_pmds[4];	/* which PMDs overflowed */
+	unsigned short  msg_active_set;		/* active set at the time of overflow */
+	unsigned short  msg_reserved1;		/* for future use */
+	unsigned int    msg_reserved2;		/* for future use */
+	unsigned long	msg_tstamp;		/* for perf tuning/debug */
+} pfm_ovfl_msg_t;
+
+typedef struct {
+	int		msg_type;		/* generic message header */
+	int		msg_ctx_fd;		/* generic message header */
+	unsigned long	msg_tstamp;		/* for perf tuning */
+} pfm_end_msg_t;
+
+typedef struct {
+	int		msg_type;		/* type of the message */
+	int		msg_ctx_fd;		/* unique identifier for the context */
+	unsigned long	msg_tstamp;		/* for perf tuning */
+} pfm_gen_msg_t;
+
+#define PFM_MSG_OVFL	1	/* an overflow happened */
+#define PFM_MSG_END	2	/* task to which context was attached ended */
+
+typedef union {
+	pfm_ovfl_msg_t	pfm_ovfl_msg;
+	pfm_end_msg_t	pfm_end_msg;
+	pfm_gen_msg_t	pfm_gen_msg;
+} pfm_msg_t;
+
+/*
+ * Define the version numbers for both perfmon as a whole and the sampling buffer format.
+ */
+#define PFM_VERSION_MAJ		 2U
+#define PFM_VERSION_MIN		 0U
+#define PFM_VERSION		 (((PFM_VERSION_MAJ&0xffff)<<16)|(PFM_VERSION_MIN & 0xffff))
+#define PFM_VERSION_MAJOR(x)	 (((x)>>16) & 0xffff)
+#define PFM_VERSION_MINOR(x)	 ((x) & 0xffff)
+
+
+/*
+ * miscellaneous architected definitions
+ */
+#define PMU_FIRST_COUNTER	4	/* first counting monitor (PMC/PMD) */
+#define PMU_MAX_PMCS		256	/* maximum architected number of PMC registers */
+#define PMU_MAX_PMDS		256	/* maximum architected number of PMD registers */
+
+
+#endif /* _UAPI_ASM_IA64_PERFMON_H */
diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/uapi/asm/perfmon_default_smpl.h
similarity index 100%
rename from arch/ia64/include/asm/perfmon_default_smpl.h
rename to arch/ia64/include/uapi/asm/perfmon_default_smpl.h
diff --git a/arch/ia64/include/asm/poll.h b/arch/ia64/include/uapi/asm/poll.h
similarity index 100%
rename from arch/ia64/include/asm/poll.h
rename to arch/ia64/include/uapi/asm/poll.h
diff --git a/arch/ia64/include/asm/posix_types.h b/arch/ia64/include/uapi/asm/posix_types.h
similarity index 100%
rename from arch/ia64/include/asm/posix_types.h
rename to arch/ia64/include/uapi/asm/posix_types.h
diff --git a/arch/ia64/include/uapi/asm/ptrace.h b/arch/ia64/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..0a02f63
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/ptrace.h
@@ -0,0 +1,247 @@
+/*
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 2003 Intel Co
+ *	Suresh Siddha <suresh.b.siddha@intel.com>
+ *	Fenghua Yu <fenghua.yu@intel.com>
+ *	Arun Sharma <arun.sharma@intel.com>
+ *
+ * 12/07/98	S. Eranian	added pt_regs & switch_stack
+ * 12/21/98	D. Mosberger	updated to match latest code
+ *  6/17/99	D. Mosberger	added second unat member to "struct switch_stack"
+ *
+ */
+#ifndef _UAPI_ASM_IA64_PTRACE_H
+#define _UAPI_ASM_IA64_PTRACE_H
+
+/*
+ * When a user process is blocked, its state looks as follows:
+ *
+ *            +----------------------+	-------	IA64_STK_OFFSET
+ *     	      |			     |	 ^
+ *            | struct pt_regs       |	 |
+ *	      |			     |	 |
+ *            +----------------------+	 |
+ *	      |			     |	 |
+ *     	      |	   memory stack	     |	 |
+ *	      |	(growing downwards)  |	 |
+ *	      //.....................//	 |
+ *					 |
+ *	      //.....................//	 |
+ *	      |			     |	 |
+ *            +----------------------+	 |
+ *            | struct switch_stack  |	 |
+ *	      |			     |	 |
+ *	      +----------------------+	 |
+ *	      |			     |	 |
+ *	      //.....................//	 |
+ *					 |
+ *	      //.....................//	 |
+ *	      |			     |	 |
+ *	      |	 register stack	     |	 |
+ *	      |	(growing upwards)    |	 |
+ *            |			     |	 |
+ *	      +----------------------+	 |  ---	IA64_RBS_OFFSET
+ *            |  struct thread_info  |	 |  ^
+ *	      +----------------------+	 |  |
+ *	      |			     |	 |  |
+ *            |  struct task_struct  |	 |  |
+ * current -> |			     |   |  |
+ *	      +----------------------+ -------
+ *
+ * Note that ar.ec is not saved explicitly in pt_reg or switch_stack.
+ * This is because ar.ec is saved as part of ar.pfs.
+ */
+
+
+#include <asm/fpu.h>
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are saved on system
+ * calls.
+ *
+ * We don't save all floating point register because the kernel
+ * is compiled to use only a very small subset, so the other are
+ * untouched.
+ *
+ * THIS STRUCTURE MUST BE A MULTIPLE 16-BYTE IN SIZE
+ * (because the memory stack pointer MUST ALWAYS be aligned this way)
+ *
+ */
+struct pt_regs {
+	/* The following registers are saved by SAVE_MIN: */
+	unsigned long b6;		/* scratch */
+	unsigned long b7;		/* scratch */
+
+	unsigned long ar_csd;           /* used by cmp8xchg16 (scratch) */
+	unsigned long ar_ssd;           /* reserved for future use (scratch) */
+
+	unsigned long r8;		/* scratch (return value register 0) */
+	unsigned long r9;		/* scratch (return value register 1) */
+	unsigned long r10;		/* scratch (return value register 2) */
+	unsigned long r11;		/* scratch (return value register 3) */
+
+	unsigned long cr_ipsr;		/* interrupted task's psr */
+	unsigned long cr_iip;		/* interrupted task's instruction pointer */
+	/*
+	 * interrupted task's function state; if bit 63 is cleared, it
+	 * contains syscall's ar.pfs.pfm:
+	 */
+	unsigned long cr_ifs;
+
+	unsigned long ar_unat;		/* interrupted task's NaT register (preserved) */
+	unsigned long ar_pfs;		/* prev function state  */
+	unsigned long ar_rsc;		/* RSE configuration */
+	/* The following two are valid only if cr_ipsr.cpl > 0 || ti->flags & _TIF_MCA_INIT */
+	unsigned long ar_rnat;		/* RSE NaT */
+	unsigned long ar_bspstore;	/* RSE bspstore */
+
+	unsigned long pr;		/* 64 predicate registers (1 bit each) */
+	unsigned long b0;		/* return pointer (bp) */
+	unsigned long loadrs;		/* size of dirty partition << 16 */
+
+	unsigned long r1;		/* the gp pointer */
+	unsigned long r12;		/* interrupted task's memory stack pointer */
+	unsigned long r13;		/* thread pointer */
+
+	unsigned long ar_fpsr;		/* floating point status (preserved) */
+	unsigned long r15;		/* scratch */
+
+	/* The remaining registers are NOT saved for system calls.  */
+
+	unsigned long r14;		/* scratch */
+	unsigned long r2;		/* scratch */
+	unsigned long r3;		/* scratch */
+
+	/* The following registers are saved by SAVE_REST: */
+	unsigned long r16;		/* scratch */
+	unsigned long r17;		/* scratch */
+	unsigned long r18;		/* scratch */
+	unsigned long r19;		/* scratch */
+	unsigned long r20;		/* scratch */
+	unsigned long r21;		/* scratch */
+	unsigned long r22;		/* scratch */
+	unsigned long r23;		/* scratch */
+	unsigned long r24;		/* scratch */
+	unsigned long r25;		/* scratch */
+	unsigned long r26;		/* scratch */
+	unsigned long r27;		/* scratch */
+	unsigned long r28;		/* scratch */
+	unsigned long r29;		/* scratch */
+	unsigned long r30;		/* scratch */
+	unsigned long r31;		/* scratch */
+
+	unsigned long ar_ccv;		/* compare/exchange value (scratch) */
+
+	/*
+	 * Floating point registers that the kernel considers scratch:
+	 */
+	struct ia64_fpreg f6;		/* scratch */
+	struct ia64_fpreg f7;		/* scratch */
+	struct ia64_fpreg f8;		/* scratch */
+	struct ia64_fpreg f9;		/* scratch */
+	struct ia64_fpreg f10;		/* scratch */
+	struct ia64_fpreg f11;		/* scratch */
+};
+
+/*
+ * This structure contains the addition registers that need to
+ * preserved across a context switch.  This generally consists of
+ * "preserved" registers.
+ */
+struct switch_stack {
+	unsigned long caller_unat;	/* user NaT collection register (preserved) */
+	unsigned long ar_fpsr;		/* floating-point status register */
+
+	struct ia64_fpreg f2;		/* preserved */
+	struct ia64_fpreg f3;		/* preserved */
+	struct ia64_fpreg f4;		/* preserved */
+	struct ia64_fpreg f5;		/* preserved */
+
+	struct ia64_fpreg f12;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f13;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f14;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f15;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f16;		/* preserved */
+	struct ia64_fpreg f17;		/* preserved */
+	struct ia64_fpreg f18;		/* preserved */
+	struct ia64_fpreg f19;		/* preserved */
+	struct ia64_fpreg f20;		/* preserved */
+	struct ia64_fpreg f21;		/* preserved */
+	struct ia64_fpreg f22;		/* preserved */
+	struct ia64_fpreg f23;		/* preserved */
+	struct ia64_fpreg f24;		/* preserved */
+	struct ia64_fpreg f25;		/* preserved */
+	struct ia64_fpreg f26;		/* preserved */
+	struct ia64_fpreg f27;		/* preserved */
+	struct ia64_fpreg f28;		/* preserved */
+	struct ia64_fpreg f29;		/* preserved */
+	struct ia64_fpreg f30;		/* preserved */
+	struct ia64_fpreg f31;		/* preserved */
+
+	unsigned long r4;		/* preserved */
+	unsigned long r5;		/* preserved */
+	unsigned long r6;		/* preserved */
+	unsigned long r7;		/* preserved */
+
+	unsigned long b0;		/* so we can force a direct return in copy_thread */
+	unsigned long b1;
+	unsigned long b2;
+	unsigned long b3;
+	unsigned long b4;
+	unsigned long b5;
+
+	unsigned long ar_pfs;		/* previous function state */
+	unsigned long ar_lc;		/* loop counter (preserved) */
+	unsigned long ar_unat;		/* NaT bits for r4-r7 */
+	unsigned long ar_rnat;		/* RSE NaT collection register */
+	unsigned long ar_bspstore;	/* RSE dirty base (preserved) */
+	unsigned long pr;		/* 64 predicate registers (1 bit each) */
+};
+
+
+/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
+struct pt_all_user_regs {
+	unsigned long nat;
+	unsigned long cr_iip;
+	unsigned long cfm;
+	unsigned long cr_ipsr;
+	unsigned long pr;
+
+	unsigned long gr[32];
+	unsigned long br[8];
+	unsigned long ar[128];
+	struct ia64_fpreg fr[128];
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/* indices to application-registers array in pt_all_user_regs */
+#define PT_AUR_RSC	16
+#define PT_AUR_BSP	17
+#define PT_AUR_BSPSTORE	18
+#define PT_AUR_RNAT	19
+#define PT_AUR_CCV	32
+#define PT_AUR_UNAT	36
+#define PT_AUR_FPSR	40
+#define PT_AUR_PFS	64
+#define PT_AUR_LC	65
+#define PT_AUR_EC	66
+
+/*
+ * The numbers chosen here are somewhat arbitrary but absolutely MUST
+ * not overlap with any of the number assigned in <linux/ptrace.h>.
+ */
+#define PTRACE_SINGLEBLOCK	12	/* resume execution until next branch */
+#define PTRACE_OLD_GETSIGINFO	13	/* (replaced by PTRACE_GETSIGINFO in <linux/ptrace.h>)  */
+#define PTRACE_OLD_SETSIGINFO	14	/* (replaced by PTRACE_SETSIGINFO in <linux/ptrace.h>)  */
+#define PTRACE_GETREGS		18	/* get all registers (pt_all_user_regs) in one shot */
+#define PTRACE_SETREGS		19	/* set all registers (pt_all_user_regs) in one shot */
+
+#define PTRACE_OLDSETOPTIONS	21
+
+#endif /* _UAPI_ASM_IA64_PTRACE_H */
diff --git a/arch/ia64/include/asm/ptrace_offsets.h b/arch/ia64/include/uapi/asm/ptrace_offsets.h
similarity index 100%
rename from arch/ia64/include/asm/ptrace_offsets.h
rename to arch/ia64/include/uapi/asm/ptrace_offsets.h
diff --git a/arch/ia64/include/asm/resource.h b/arch/ia64/include/uapi/asm/resource.h
similarity index 100%
rename from arch/ia64/include/asm/resource.h
rename to arch/ia64/include/uapi/asm/resource.h
diff --git a/arch/ia64/include/asm/rse.h b/arch/ia64/include/uapi/asm/rse.h
similarity index 100%
rename from arch/ia64/include/asm/rse.h
rename to arch/ia64/include/uapi/asm/rse.h
diff --git a/arch/ia64/include/asm/sembuf.h b/arch/ia64/include/uapi/asm/sembuf.h
similarity index 100%
rename from arch/ia64/include/asm/sembuf.h
rename to arch/ia64/include/uapi/asm/sembuf.h
diff --git a/arch/ia64/include/asm/setup.h b/arch/ia64/include/uapi/asm/setup.h
similarity index 100%
rename from arch/ia64/include/asm/setup.h
rename to arch/ia64/include/uapi/asm/setup.h
diff --git a/arch/ia64/include/asm/shmbuf.h b/arch/ia64/include/uapi/asm/shmbuf.h
similarity index 100%
rename from arch/ia64/include/asm/shmbuf.h
rename to arch/ia64/include/uapi/asm/shmbuf.h
diff --git a/arch/ia64/include/asm/sigcontext.h b/arch/ia64/include/uapi/asm/sigcontext.h
similarity index 100%
rename from arch/ia64/include/asm/sigcontext.h
rename to arch/ia64/include/uapi/asm/sigcontext.h
diff --git a/arch/ia64/include/uapi/asm/siginfo.h b/arch/ia64/include/uapi/asm/siginfo.h
new file mode 100644
index 0000000..4ea6225
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/siginfo.h
@@ -0,0 +1,121 @@
+/*
+ * Based on <asm-i386/siginfo.h>.
+ *
+ * Modified 1998-2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+#ifndef _UAPI_ASM_IA64_SIGINFO_H
+#define _UAPI_ASM_IA64_SIGINFO_H
+
+
+#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+
+#define HAVE_ARCH_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+	int __pad0;
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			uid_t _uid;		/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			char _pad[sizeof(__ARCH_SI_UID_T) - sizeof(int)];
+			sigval_t _sigval;	/* must overlay ._rt._sigval! */
+			int _sys_private;	/* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			uid_t _uid;		/* sender's uid */
+			sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			pid_t _pid;		/* which child */
+			uid_t _uid;		/* sender's uid */
+			int _status;		/* exit code */
+			clock_t _utime;
+			clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			void __user *_addr;	/* faulting insn/memory ref. */
+			int _imm;		/* immediate value for "break" */
+			unsigned int _flags;	/* see below */
+			unsigned long _isr;	/* isr */
+			short _addr_lsb;	/* lsb of faulting address */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			long _band;	/* POLL_IN, POLL_OUT, POLL_MSG (XPG requires a "long") */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} siginfo_t;
+
+#define si_imm		_sifields._sigfault._imm	/* as per UNIX SysV ABI spec */
+#define si_flags	_sifields._sigfault._flags
+/*
+ * si_isr is valid for SIGILL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP provided that
+ * si_code is non-zero and __ISR_VALID is set in si_flags.
+ */
+#define si_isr		_sifields._sigfault._isr
+
+/*
+ * Flag values for si_flags:
+ */
+#define __ISR_VALID_BIT	0
+#define __ISR_VALID	(1 << __ISR_VALID_BIT)
+
+/*
+ * SIGILL si_codes
+ */
+#define ILL_BADIADDR	(__SI_FAULT|9)	/* unimplemented instruction address */
+#define __ILL_BREAK	(__SI_FAULT|10)	/* illegal break */
+#define __ILL_BNDMOD	(__SI_FAULT|11)	/* bundle-update (modification) in progress */
+#undef NSIGILL
+#define NSIGILL		11
+
+/*
+ * SIGFPE si_codes
+ */
+#define __FPE_DECOVF	(__SI_FAULT|9)	/* decimal overflow */
+#define __FPE_DECDIV	(__SI_FAULT|10)	/* decimal division by zero */
+#define __FPE_DECERR	(__SI_FAULT|11)	/* packed decimal error */
+#define __FPE_INVASC	(__SI_FAULT|12)	/* invalid ASCII digit */
+#define __FPE_INVDEC	(__SI_FAULT|13)	/* invalid decimal digit */
+#undef NSIGFPE
+#define NSIGFPE		13
+
+/*
+ * SIGSEGV si_codes
+ */
+#define __SEGV_PSTKOVF	(__SI_FAULT|3)	/* paragraph stack overflow */
+#undef NSIGSEGV
+#define NSIGSEGV	3
+
+#undef NSIGTRAP
+#define NSIGTRAP	4
+
+
+#endif /* _UAPI_ASM_IA64_SIGINFO_H */
diff --git a/arch/ia64/include/uapi/asm/signal.h b/arch/ia64/include/uapi/asm/signal.h
new file mode 100644
index 0000000..e531c42
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/signal.h
@@ -0,0 +1,127 @@
+/*
+ * Modified 1998-2001, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * Unfortunately, this file is being included by bits/signal.h in
+ * glibc-2.x.  Hence the #ifdef __KERNEL__ ugliness.
+ */
+#ifndef _UAPI_ASM_IA64_SIGNAL_H
+#define _UAPI_ASM_IA64_SIGNAL_H
+
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+/* signal 31 is no longer "unused", but the SIGUNUSED macro remains for backwards compatibility */
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+/*
+ * The minimum stack size needs to be fairly large because we want to
+ * be sure that an app compiled for today's CPUs will continue to run
+ * on all future CPU models.  The CPU model matters because the signal
+ * frame needs to have space for the complete machine state, including
+ * all physical stacked registers.  The number of physical stacked
+ * registers is CPU model dependent, but given that the width of
+ * ar.rsc.loadrs is 14 bits, we can assume that they'll never take up
+ * more than 16KB of space.
+ */
+#if 1
+  /*
+   * This is a stupid typo: the value was _meant_ to be 131072 (0x20000), but I typed it
+   * in wrong. ;-(  To preserve backwards compatibility, we leave the kernel at the
+   * incorrect value and fix libc only.
+   */
+# define MINSIGSTKSZ	131027	/* min. stack size for sigaltstack() */
+#else
+# define MINSIGSTKSZ	131072	/* min. stack size for sigaltstack() */
+#endif
+#define SIGSTKSZ	262144	/* default stack size for sigaltstack() */
+
+
+#include <asm-generic/signal-defs.h>
+
+# ifndef __ASSEMBLY__
+
+#  include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+
+# endif /* !__ASSEMBLY__ */
+#endif /* _UAPI_ASM_IA64_SIGNAL_H */
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/uapi/asm/socket.h
similarity index 100%
rename from arch/ia64/include/asm/socket.h
rename to arch/ia64/include/uapi/asm/socket.h
diff --git a/arch/ia64/include/asm/sockios.h b/arch/ia64/include/uapi/asm/sockios.h
similarity index 100%
rename from arch/ia64/include/asm/sockios.h
rename to arch/ia64/include/uapi/asm/sockios.h
diff --git a/arch/ia64/include/asm/stat.h b/arch/ia64/include/uapi/asm/stat.h
similarity index 100%
rename from arch/ia64/include/asm/stat.h
rename to arch/ia64/include/uapi/asm/stat.h
diff --git a/arch/ia64/include/asm/statfs.h b/arch/ia64/include/uapi/asm/statfs.h
similarity index 100%
rename from arch/ia64/include/asm/statfs.h
rename to arch/ia64/include/uapi/asm/statfs.h
diff --git a/arch/ia64/include/asm/swab.h b/arch/ia64/include/uapi/asm/swab.h
similarity index 100%
rename from arch/ia64/include/asm/swab.h
rename to arch/ia64/include/uapi/asm/swab.h
diff --git a/arch/ia64/include/asm/termbits.h b/arch/ia64/include/uapi/asm/termbits.h
similarity index 100%
rename from arch/ia64/include/asm/termbits.h
rename to arch/ia64/include/uapi/asm/termbits.h
diff --git a/arch/ia64/include/uapi/asm/termios.h b/arch/ia64/include/uapi/asm/termios.h
new file mode 100644
index 0000000..d59b48c
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/termios.h
@@ -0,0 +1,50 @@
+/*
+ * Modified 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * 99/01/28	Added N_IRDA and N_SMSBLOCK
+ */
+#ifndef _UAPI_ASM_IA64_TERMIOS_H
+#define _UAPI_ASM_IA64_TERMIOS_H
+
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+
+#endif /* _UAPI_ASM_IA64_TERMIOS_H */
diff --git a/arch/ia64/include/uapi/asm/types.h b/arch/ia64/include/uapi/asm/types.h
new file mode 100644
index 0000000..321193b
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/types.h
@@ -0,0 +1,31 @@
+/*
+ * This file is never included by application software unless explicitly
+ * requested (e.g., via linux/types.h) in which case the application is
+ * Linux specific so (user-) name space pollution is not a major issue.
+ * However, for interoperability, libraries still need to be careful to
+ * avoid naming clashes.
+ *
+ * Based on <asm-alpha/types.h>.
+ *
+ * Modified 1998-2000, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+#ifndef _UAPI_ASM_IA64_TYPES_H
+#define _UAPI_ASM_IA64_TYPES_H
+
+
+#ifndef __KERNEL__
+#include <asm-generic/int-l64.h>
+#endif
+
+#ifdef __ASSEMBLY__
+# define __IA64_UL(x)		(x)
+# define __IA64_UL_CONST(x)	x
+
+#else
+# define __IA64_UL(x)		((unsigned long)(x))
+# define __IA64_UL_CONST(x)	x##UL
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _UAPI_ASM_IA64_TYPES_H */
diff --git a/arch/ia64/include/asm/ucontext.h b/arch/ia64/include/uapi/asm/ucontext.h
similarity index 100%
rename from arch/ia64/include/asm/ucontext.h
rename to arch/ia64/include/uapi/asm/ucontext.h
diff --git a/arch/ia64/include/uapi/asm/unistd.h b/arch/ia64/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..b706aa5
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/unistd.h
@@ -0,0 +1,328 @@
+/*
+ * IA-64 Linux syscall numbers and inline-functions.
+ *
+ * Copyright (C) 1998-2005 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _UAPI_ASM_IA64_UNISTD_H
+#define _UAPI_ASM_IA64_UNISTD_H
+
+
+#include <asm/break.h>
+
+#define __BREAK_SYSCALL			__IA64_BREAK_SYSCALL
+
+#define __NR_ni_syscall			1024
+#define __NR_exit			1025
+#define __NR_read			1026
+#define __NR_write			1027
+#define __NR_open			1028
+#define __NR_close			1029
+#define __NR_creat			1030
+#define __NR_link			1031
+#define __NR_unlink			1032
+#define __NR_execve			1033
+#define __NR_chdir			1034
+#define __NR_fchdir			1035
+#define __NR_utimes			1036
+#define __NR_mknod			1037
+#define __NR_chmod			1038
+#define __NR_chown			1039
+#define __NR_lseek			1040
+#define __NR_getpid			1041
+#define __NR_getppid			1042
+#define __NR_mount			1043
+#define __NR_umount			1044
+#define __NR_setuid			1045
+#define __NR_getuid			1046
+#define __NR_geteuid			1047
+#define __NR_ptrace			1048
+#define __NR_access			1049
+#define __NR_sync			1050
+#define __NR_fsync			1051
+#define __NR_fdatasync			1052
+#define __NR_kill			1053
+#define __NR_rename			1054
+#define __NR_mkdir			1055
+#define __NR_rmdir			1056
+#define __NR_dup			1057
+#define __NR_pipe			1058
+#define __NR_times			1059
+#define __NR_brk			1060
+#define __NR_setgid			1061
+#define __NR_getgid			1062
+#define __NR_getegid			1063
+#define __NR_acct			1064
+#define __NR_ioctl			1065
+#define __NR_fcntl			1066
+#define __NR_umask			1067
+#define __NR_chroot			1068
+#define __NR_ustat			1069
+#define __NR_dup2			1070
+#define __NR_setreuid			1071
+#define __NR_setregid			1072
+#define __NR_getresuid			1073
+#define __NR_setresuid			1074
+#define __NR_getresgid			1075
+#define __NR_setresgid			1076
+#define __NR_getgroups			1077
+#define __NR_setgroups			1078
+#define __NR_getpgid			1079
+#define __NR_setpgid			1080
+#define __NR_setsid			1081
+#define __NR_getsid			1082
+#define __NR_sethostname		1083
+#define __NR_setrlimit			1084
+#define __NR_getrlimit			1085
+#define __NR_getrusage			1086
+#define __NR_gettimeofday		1087
+#define __NR_settimeofday		1088
+#define __NR_select			1089
+#define __NR_poll			1090
+#define __NR_symlink			1091
+#define __NR_readlink			1092
+#define __NR_uselib			1093
+#define __NR_swapon			1094
+#define __NR_swapoff			1095
+#define __NR_reboot			1096
+#define __NR_truncate			1097
+#define __NR_ftruncate			1098
+#define __NR_fchmod			1099
+#define __NR_fchown			1100
+#define __NR_getpriority		1101
+#define __NR_setpriority		1102
+#define __NR_statfs			1103
+#define __NR_fstatfs			1104
+#define __NR_gettid			1105
+#define __NR_semget			1106
+#define __NR_semop			1107
+#define __NR_semctl			1108
+#define __NR_msgget			1109
+#define __NR_msgsnd			1110
+#define __NR_msgrcv			1111
+#define __NR_msgctl			1112
+#define __NR_shmget			1113
+#define __NR_shmat			1114
+#define __NR_shmdt			1115
+#define __NR_shmctl			1116
+/* also known as klogctl() in GNU libc: */
+#define __NR_syslog			1117
+#define __NR_setitimer			1118
+#define __NR_getitimer			1119
+/* 1120 was __NR_old_stat */
+/* 1121 was __NR_old_lstat */
+/* 1122 was __NR_old_fstat */
+#define __NR_vhangup			1123
+#define __NR_lchown			1124
+#define __NR_remap_file_pages		1125
+#define __NR_wait4			1126
+#define __NR_sysinfo			1127
+#define __NR_clone			1128
+#define __NR_setdomainname		1129
+#define __NR_uname			1130
+#define __NR_adjtimex			1131
+/* 1132 was __NR_create_module */
+#define __NR_init_module		1133
+#define __NR_delete_module		1134
+/* 1135 was __NR_get_kernel_syms */
+/* 1136 was __NR_query_module */
+#define __NR_quotactl			1137
+#define __NR_bdflush			1138
+#define __NR_sysfs			1139
+#define __NR_personality		1140
+#define __NR_afs_syscall		1141
+#define __NR_setfsuid			1142
+#define __NR_setfsgid			1143
+#define __NR_getdents			1144
+#define __NR_flock			1145
+#define __NR_readv			1146
+#define __NR_writev			1147
+#define __NR_pread64			1148
+#define __NR_pwrite64			1149
+#define __NR__sysctl			1150
+#define __NR_mmap			1151
+#define __NR_munmap			1152
+#define __NR_mlock			1153
+#define __NR_mlockall			1154
+#define __NR_mprotect			1155
+#define __NR_mremap			1156
+#define __NR_msync			1157
+#define __NR_munlock			1158
+#define __NR_munlockall			1159
+#define __NR_sched_getparam		1160
+#define __NR_sched_setparam		1161
+#define __NR_sched_getscheduler		1162
+#define __NR_sched_setscheduler		1163
+#define __NR_sched_yield		1164
+#define __NR_sched_get_priority_max	1165
+#define __NR_sched_get_priority_min	1166
+#define __NR_sched_rr_get_interval	1167
+#define __NR_nanosleep			1168
+#define __NR_nfsservctl			1169
+#define __NR_prctl			1170
+/* 1171 is reserved for backwards compatibility with old __NR_getpagesize */
+#define __NR_mmap2			1172
+#define __NR_pciconfig_read		1173
+#define __NR_pciconfig_write		1174
+#define __NR_perfmonctl			1175
+#define __NR_sigaltstack		1176
+#define __NR_rt_sigaction		1177
+#define __NR_rt_sigpending		1178
+#define __NR_rt_sigprocmask		1179
+#define __NR_rt_sigqueueinfo		1180
+#define __NR_rt_sigreturn		1181
+#define __NR_rt_sigsuspend		1182
+#define __NR_rt_sigtimedwait		1183
+#define __NR_getcwd			1184
+#define __NR_capget			1185
+#define __NR_capset			1186
+#define __NR_sendfile			1187
+#define __NR_getpmsg			1188
+#define __NR_putpmsg			1189
+#define __NR_socket			1190
+#define __NR_bind			1191
+#define __NR_connect			1192
+#define __NR_listen			1193
+#define __NR_accept			1194
+#define __NR_getsockname		1195
+#define __NR_getpeername		1196
+#define __NR_socketpair			1197
+#define __NR_send			1198
+#define __NR_sendto			1199
+#define __NR_recv			1200
+#define __NR_recvfrom			1201
+#define __NR_shutdown			1202
+#define __NR_setsockopt			1203
+#define __NR_getsockopt			1204
+#define __NR_sendmsg			1205
+#define __NR_recvmsg			1206
+#define __NR_pivot_root			1207
+#define __NR_mincore			1208
+#define __NR_madvise			1209
+#define __NR_stat			1210
+#define __NR_lstat			1211
+#define __NR_fstat			1212
+#define __NR_clone2			1213
+#define __NR_getdents64			1214
+#define __NR_getunwind			1215
+#define __NR_readahead			1216
+#define __NR_setxattr			1217
+#define __NR_lsetxattr			1218
+#define __NR_fsetxattr			1219
+#define __NR_getxattr			1220
+#define __NR_lgetxattr			1221
+#define __NR_fgetxattr			1222
+#define __NR_listxattr			1223
+#define __NR_llistxattr			1224
+#define __NR_flistxattr			1225
+#define __NR_removexattr		1226
+#define __NR_lremovexattr		1227
+#define __NR_fremovexattr		1228
+#define __NR_tkill			1229
+#define __NR_futex			1230
+#define __NR_sched_setaffinity		1231
+#define __NR_sched_getaffinity		1232
+#define __NR_set_tid_address		1233
+#define __NR_fadvise64			1234
+#define __NR_tgkill			1235
+#define __NR_exit_group			1236
+#define __NR_lookup_dcookie		1237
+#define __NR_io_setup			1238
+#define __NR_io_destroy			1239
+#define __NR_io_getevents		1240
+#define __NR_io_submit			1241
+#define __NR_io_cancel			1242
+#define __NR_epoll_create		1243
+#define __NR_epoll_ctl			1244
+#define __NR_epoll_wait			1245
+#define __NR_restart_syscall		1246
+#define __NR_semtimedop			1247
+#define __NR_timer_create		1248
+#define __NR_timer_settime		1249
+#define __NR_timer_gettime		1250
+#define __NR_timer_getoverrun		1251
+#define __NR_timer_delete		1252
+#define __NR_clock_settime		1253
+#define __NR_clock_gettime		1254
+#define __NR_clock_getres		1255
+#define __NR_clock_nanosleep		1256
+#define __NR_fstatfs64			1257
+#define __NR_statfs64			1258
+#define __NR_mbind			1259
+#define __NR_get_mempolicy		1260
+#define __NR_set_mempolicy		1261
+#define __NR_mq_open			1262
+#define __NR_mq_unlink			1263
+#define __NR_mq_timedsend		1264
+#define __NR_mq_timedreceive		1265
+#define __NR_mq_notify			1266
+#define __NR_mq_getsetattr		1267
+#define __NR_kexec_load			1268
+#define __NR_vserver			1269
+#define __NR_waitid			1270
+#define __NR_add_key			1271
+#define __NR_request_key		1272
+#define __NR_keyctl			1273
+#define __NR_ioprio_set			1274
+#define __NR_ioprio_get			1275
+#define __NR_move_pages			1276
+#define __NR_inotify_init		1277
+#define __NR_inotify_add_watch		1278
+#define __NR_inotify_rm_watch		1279
+#define __NR_migrate_pages		1280
+#define __NR_openat			1281
+#define __NR_mkdirat			1282
+#define __NR_mknodat			1283
+#define __NR_fchownat			1284
+#define __NR_futimesat			1285
+#define __NR_newfstatat			1286
+#define __NR_unlinkat			1287
+#define __NR_renameat			1288
+#define __NR_linkat			1289
+#define __NR_symlinkat			1290
+#define __NR_readlinkat			1291
+#define __NR_fchmodat			1292
+#define __NR_faccessat			1293
+#define __NR_pselect6			1294
+#define __NR_ppoll			1295
+#define __NR_unshare			1296
+#define __NR_splice			1297
+#define __NR_set_robust_list		1298
+#define __NR_get_robust_list		1299
+#define __NR_sync_file_range		1300
+#define __NR_tee			1301
+#define __NR_vmsplice			1302
+#define __NR_fallocate			1303
+#define __NR_getcpu			1304
+#define __NR_epoll_pwait		1305
+#define __NR_utimensat			1306
+#define __NR_signalfd			1307
+#define __NR_timerfd			1308
+#define __NR_eventfd			1309
+#define __NR_timerfd_create		1310
+#define __NR_timerfd_settime		1311
+#define __NR_timerfd_gettime		1312
+#define __NR_signalfd4			1313
+#define __NR_eventfd2			1314
+#define __NR_epoll_create1		1315
+#define __NR_dup3			1316
+#define __NR_pipe2			1317
+#define __NR_inotify_init1		1318
+#define __NR_preadv			1319
+#define __NR_pwritev			1320
+#define __NR_rt_tgsigqueueinfo		1321
+#define __NR_recvmmsg			1322
+#define __NR_fanotify_init		1323
+#define __NR_fanotify_mark		1324
+#define __NR_prlimit64			1325
+#define __NR_name_to_handle_at		1326
+#define __NR_open_by_handle_at  	1327
+#define __NR_clock_adjtime		1328
+#define __NR_syncfs			1329
+#define __NR_setns			1330
+#define __NR_sendmmsg			1331
+#define __NR_process_vm_readv		1332
+#define __NR_process_vm_writev		1333
+#define __NR_accept4			1334
+
+#endif /* _UAPI_ASM_IA64_UNISTD_H */
diff --git a/arch/ia64/include/uapi/asm/ustack.h b/arch/ia64/include/uapi/asm/ustack.h
new file mode 100644
index 0000000..1dfebc6
--- /dev/null
+++ b/arch/ia64/include/uapi/asm/ustack.h
@@ -0,0 +1,12 @@
+#ifndef _UAPI_ASM_IA64_USTACK_H
+#define _UAPI_ASM_IA64_USTACK_H
+
+/*
+ * Constants for the user stack size
+ */
+
+
+/* Make a default stack size of 2GiB */
+#define DEFAULT_USER_STACK_SIZE	(1UL << 31)
+
+#endif /* _UAPI_ASM_IA64_USTACK_H */
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index ee31fe9..35e106f 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -614,14 +614,14 @@
 	    const char __user *const __user *envp,
 	    struct pt_regs *regs)
 {
-	char *fname;
+	struct filename *fname;
 	int error;
 
 	fname = getname(filename);
 	error = PTR_ERR(fname);
 	if (IS_ERR(fname))
 		goto out;
-	error = do_execve(fname, argv, envp, regs);
+	error = do_execve(fname->name, argv, envp, regs);
 	putname(fname);
 out:
 	return error;
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 80ff9ac..f638821 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -19,7 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/efi.h>
 #include <linux/timex.h>
-#include <linux/clocksource.h>
+#include <linux/timekeeper_internal.h>
 #include <linux/platform_device.h>
 
 #include <asm/machvec.h>
@@ -454,7 +454,7 @@
 {
 }
 
-void update_vsyscall(struct timespec *wall, struct timespec *wtm,
+void update_vsyscall_old(struct timespec *wall, struct timespec *wtm,
 			struct clocksource *c, u32 mult)
 {
 	write_seqcount_begin(&fsyscall_gtod_data.seq);
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
index 384e63f..e736627 100644
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@@ -296,14 +296,14 @@
 			  unsigned long r6, struct pt_regs regs)
 {
 	int error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname(ufilename);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
 
-	error = do_execve(filename, uargv, uenvp, &regs);
+	error = do_execve(filename->name, uargv, uenvp, &regs);
 	putname(filename);
 out:
 	return error;
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index e5b154f..404c0f2 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -54,13 +54,13 @@
 				  struct pt_regs *regs)
 {
 	int error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname(filenamei);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = do_execve(filename, argv, envp, regs);
+	error = do_execve(filename->name, argv, envp, regs);
 	putname(filename);
 out:
 	return error;
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index f4546e9..23817a6 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -283,6 +283,15 @@
 	struct pt_regs *regs = args->regs;
 	int trap = (regs->cp0_cause & 0x7c) >> 2;
 
+#ifdef CONFIG_KPROBES
+	/*
+	 * Return immediately if the kprobes fault notifier has set
+	 * DIE_PAGE_FAULT.
+	 */
+	if (cmd == DIE_PAGE_FAULT)
+		return NOTIFY_DONE;
+#endif /* CONFIG_KPROBES */
+
 	/* Userspace events, ignore. */
 	if (user_mode(regs))
 		return NOTIFY_DONE;
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 922a554..3a21ace 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -83,13 +83,13 @@
 asmlinkage int sys32_execve(nabi_no_regargs struct pt_regs regs)
 {
 	int error;
-	char * filename;
+	struct filename *filename;
 
 	filename = getname(compat_ptr(regs.regs[4]));
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = compat_do_execve(filename, compat_ptr(regs.regs[5]),
+	error = compat_do_execve(filename->name, compat_ptr(regs.regs[5]),
 				 compat_ptr(regs.regs[6]), &regs);
 	putname(filename);
 
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index b08220c..2bd561b 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -133,13 +133,13 @@
 asmlinkage int sys_execve(nabi_no_regargs struct pt_regs regs)
 {
 	int error;
-	char * filename;
+	struct filename *filename;
 
 	filename = getname((const char __user *) (long)regs.regs[4]);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = do_execve(filename,
+	error = do_execve(filename->name,
 			  (const char __user *const __user *) (long)regs.regs[5],
 	                  (const char __user *const __user *) (long)regs.regs[6],
 			  &regs);
diff --git a/arch/mn10300/include/asm/Kbuild b/arch/mn10300/include/asm/Kbuild
index fccd81e..4a159da 100644
--- a/arch/mn10300/include/asm/Kbuild
+++ b/arch/mn10300/include/asm/Kbuild
@@ -1,4 +1,3 @@
-include include/asm-generic/Kbuild.asm
 
 generic-y += clkdev.h
 generic-y += exec.h
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
index 08ac856..838a383 100644
--- a/arch/mn10300/include/asm/ptrace.h
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -11,77 +11,8 @@
 #ifndef _ASM_PTRACE_H
 #define _ASM_PTRACE_H
 
-#define PT_A3		0
-#define PT_A2		1
-#define PT_D3		2
-#define	PT_D2		3
-#define PT_MCVF		4
-#define	PT_MCRL		5
-#define PT_MCRH		6
-#define	PT_MDRQ		7
-#define	PT_E1		8
-#define	PT_E0		9
-#define	PT_E7		10
-#define	PT_E6		11
-#define	PT_E5		12
-#define	PT_E4		13
-#define	PT_E3		14
-#define	PT_E2		15
-#define	PT_SP		16
-#define	PT_LAR		17
-#define	PT_LIR		18
-#define	PT_MDR		19
-#define	PT_A1		20
-#define	PT_A0		21
-#define	PT_D1		22
-#define	PT_D0		23
-#define PT_ORIG_D0	24
-#define	PT_EPSW		25
-#define	PT_PC		26
-#define NR_PTREGS	27
+#include <uapi/asm/ptrace.h>
 
-/*
- * This defines the way registers are stored in the event of an exception
- * - the strange order is due to the MOVM instruction
- */
-struct pt_regs {
-	unsigned long		a3;		/* syscall arg 3 */
-	unsigned long		a2;		/* syscall arg 4 */
-	unsigned long		d3;		/* syscall arg 5 */
-	unsigned long		d2;		/* syscall arg 6 */
-	unsigned long		mcvf;
-	unsigned long		mcrl;
-	unsigned long		mcrh;
-	unsigned long		mdrq;
-	unsigned long		e1;
-	unsigned long		e0;
-	unsigned long		e7;
-	unsigned long		e6;
-	unsigned long		e5;
-	unsigned long		e4;
-	unsigned long		e3;
-	unsigned long		e2;
-	unsigned long		sp;
-	unsigned long		lar;
-	unsigned long		lir;
-	unsigned long		mdr;
-	unsigned long		a1;
-	unsigned long		a0;		/* syscall arg 1 */
-	unsigned long		d1;		/* syscall arg 2 */
-	unsigned long		d0;		/* syscall ret */
-	struct pt_regs		*next;		/* next frame pointer */
-	unsigned long		orig_d0;	/* syscall number */
-	unsigned long		epsw;
-	unsigned long		pc;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-
-#ifdef __KERNEL__
 
 #define user_mode(regs)			(((regs)->epsw & EPSW_nSL) == EPSW_nSL)
 #define instruction_pointer(regs)	((regs)->pc)
@@ -92,5 +23,4 @@
 
 #define profile_pc(regs) ((regs)->pc)
 
-#endif /* __KERNEL__  */
 #endif /* _ASM_PTRACE_H */
diff --git a/arch/mn10300/include/asm/setup.h b/arch/mn10300/include/asm/setup.h
index c229d1e..fb02455 100644
--- a/arch/mn10300/include/asm/setup.h
+++ b/arch/mn10300/include/asm/setup.h
@@ -11,8 +11,8 @@
 #ifndef _ASM_SETUP_H
 #define _ASM_SETUP_H
 
-#ifdef __KERNEL__
+#include <uapi/asm/setup.h>
+
 extern void __init unit_setup(void);
 extern void __init unit_init_IRQ(void);
-#endif
 #endif /* _ASM_SETUP_H */
diff --git a/arch/mn10300/include/asm/signal.h b/arch/mn10300/include/asm/signal.h
index 1865d72..f9668ec 100644
--- a/arch/mn10300/include/asm/signal.h
+++ b/arch/mn10300/include/asm/signal.h
@@ -11,12 +11,8 @@
 #ifndef _ASM_SIGNAL_H
 #define _ASM_SIGNAL_H
 
-#include <linux/types.h>
+#include <uapi/asm/signal.h>
 
-/* Avoid too many header ordering problems.  */
-struct siginfo;
-
-#ifdef __KERNEL__
 /* Most things should be clean enough to redefine this at will, if care
    is taken to make libc match.  */
 
@@ -30,94 +26,6 @@
 	unsigned long	sig[_NSIG_WORDS];
 } sigset_t;
 
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-#define NSIG		32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001U
-#define SA_NOCLDWAIT	0x00000002U
-#define SA_SIGINFO	0x00000004U
-#define SA_ONSTACK	0x08000000U
-#define SA_RESTART	0x10000000U
-#define SA_NODEFER	0x40000000U
-#define SA_RESETHAND	0x80000000U
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal-defs.h>
-
-#ifdef __KERNEL__
 struct old_sigaction {
 	__sighandler_t sa_handler;
 	old_sigset_t sa_mask;
@@ -135,37 +43,10 @@
 struct k_sigaction {
 	struct sigaction sa;
 };
-#else
-/* Here we must cater to libcs that poke about in kernel headers.  */
-
-struct sigaction {
-	union {
-	  __sighandler_t _sa_handler;
-	  void (*_sa_sigaction)(int, struct siginfo *, void *);
-	} _u;
-	sigset_t sa_mask;
-	unsigned long sa_flags;
-	void (*sa_restorer)(void);
-};
-
-#define sa_handler	_u._sa_handler
-#define sa_sigaction	_u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
-	void __user	*ss_sp;
-	int		ss_flags;
-	size_t		ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
 #include <asm/sigcontext.h>
 
 
 struct pt_regs;
 #define ptrace_signal_deliver(regs, cookie) do { } while (0)
 
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_SIGNAL_H */
diff --git a/arch/mn10300/include/asm/termios.h b/arch/mn10300/include/asm/termios.h
index dd7cf61..c2e29c7 100644
--- a/arch/mn10300/include/asm/termios.h
+++ b/arch/mn10300/include/asm/termios.h
@@ -1,27 +1,8 @@
 #ifndef _ASM_TERMIOS_H
 #define _ASM_TERMIOS_H
 
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
+#include <uapi/asm/termios.h>
 
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-#ifdef __KERNEL__
 /*	intr=^C		quit=^|		erase=del	kill=^U
 	eof=^D		vtime=\0	vmin=\1		sxtc=\0
 	start=^Q	stop=^S		susp=^Z		eol=\0
@@ -29,64 +10,4 @@
 	eol2=\0
 */
 #define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-#define TIOCM_MODEM_BITS       TIOCM_OUT2      /* IRDA support */
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
-	unsigned short __tmp; \
-	get_user(__tmp, &(termio)->x); \
-	*(unsigned short *) &(termios)->x = __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
-	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
-	put_user((termios)->c_iflag, &(termio)->c_iflag); \
-	put_user((termios)->c_oflag, &(termio)->c_oflag); \
-	put_user((termios)->c_cflag, &(termio)->c_cflag); \
-	put_user((termios)->c_lflag, &(termio)->c_lflag); \
-	put_user((termios)->c_line,  &(termio)->c_line); \
-	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) \
-	copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) \
-	copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) \
-	copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) \
-	copy_to_user(u, k, sizeof(struct termios))
-
 #endif	/* _ASM_TERMIOS_H */
diff --git a/arch/mn10300/include/asm/types.h b/arch/mn10300/include/asm/types.h
index 713d4ba..3d6e483 100644
--- a/arch/mn10300/include/asm/types.h
+++ b/arch/mn10300/include/asm/types.h
@@ -11,15 +11,12 @@
 #ifndef _ASM_TYPES_H
 #define _ASM_TYPES_H
 
-#include <asm-generic/int-ll64.h>
+#include <uapi/asm/types.h>
 
 /*
  * These aren't exported outside the kernel to avoid name space clashes
  */
-#ifdef __KERNEL__
 
 #define BITS_PER_LONG 32
 
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_TYPES_H */
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
index 044c770..55bbec1 100644
--- a/arch/mn10300/include/asm/unistd.h
+++ b/arch/mn10300/include/asm/unistd.h
@@ -11,347 +11,8 @@
 #ifndef _ASM_UNISTD_H
 #define _ASM_UNISTD_H
 
-#define __NR_restart_syscall      0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_lchown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		110
-#define __NR_vhangup		111
-#define __NR_idle		112
-#define __NR_vm86old		113
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_modify_ldt		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_vm86		166
-#define __NR_query_module	167
-#define __NR_poll		168
-#define __NR_nfsservctl		169
-#define __NR_setresgid		170
-#define __NR_getresgid		171
-#define __NR_prctl              172
-#define __NR_rt_sigreturn	173
-#define __NR_rt_sigaction	174
-#define __NR_rt_sigprocmask	175
-#define __NR_rt_sigpending	176
-#define __NR_rt_sigtimedwait	177
-#define __NR_rt_sigqueueinfo	178
-#define __NR_rt_sigsuspend	179
-#define __NR_pread64		180
-#define __NR_pwrite64		181
-#define __NR_chown		182
-#define __NR_getcwd		183
-#define __NR_capget		184
-#define __NR_capset		185
-#define __NR_sigaltstack	186
-#define __NR_sendfile		187
-#define __NR_getpmsg		188	/* some people actually want streams */
-#define __NR_putpmsg		189	/* some people actually want streams */
-#define __NR_vfork		190
-#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#define __NR_lchown32		198
-#define __NR_getuid32		199
-#define __NR_getgid32		200
-#define __NR_geteuid32		201
-#define __NR_getegid32		202
-#define __NR_setreuid32		203
-#define __NR_setregid32		204
-#define __NR_getgroups32	205
-#define __NR_setgroups32	206
-#define __NR_fchown32		207
-#define __NR_setresuid32	208
-#define __NR_getresuid32	209
-#define __NR_setresgid32	210
-#define __NR_getresgid32	211
-#define __NR_chown32		212
-#define __NR_setuid32		213
-#define __NR_setgid32		214
-#define __NR_setfsuid32		215
-#define __NR_setfsgid32		216
-#define __NR_pivot_root		217
-#define __NR_mincore		218
-#define __NR_madvise		219
-#define __NR_madvise1		219	/* delete when C lib stub is removed */
-#define __NR_getdents64		220
-#define __NR_fcntl64		221
-/* 223 is unused */
-#define __NR_gettid		224
-#define __NR_readahead		225
-#define __NR_setxattr		226
-#define __NR_lsetxattr		227
-#define __NR_fsetxattr		228
-#define __NR_getxattr		229
-#define __NR_lgetxattr		230
-#define __NR_fgetxattr		231
-#define __NR_listxattr		232
-#define __NR_llistxattr		233
-#define __NR_flistxattr		234
-#define __NR_removexattr	235
-#define __NR_lremovexattr	236
-#define __NR_fremovexattr	237
-#define __NR_tkill		238
-#define __NR_sendfile64		239
-#define __NR_futex		240
-#define __NR_sched_setaffinity	241
-#define __NR_sched_getaffinity	242
-#define __NR_set_thread_area	243
-#define __NR_get_thread_area	244
-#define __NR_io_setup		245
-#define __NR_io_destroy		246
-#define __NR_io_getevents	247
-#define __NR_io_submit		248
-#define __NR_io_cancel		249
-#define __NR_fadvise64		250
+#include <uapi/asm/unistd.h>
 
-#define __NR_exit_group		252
-#define __NR_lookup_dcookie	253
-#define __NR_epoll_create	254
-#define __NR_epoll_ctl		255
-#define __NR_epoll_wait		256
-#define __NR_remap_file_pages	257
-#define __NR_set_tid_address	258
-#define __NR_timer_create	259
-#define __NR_timer_settime	(__NR_timer_create+1)
-#define __NR_timer_gettime	(__NR_timer_create+2)
-#define __NR_timer_getoverrun	(__NR_timer_create+3)
-#define __NR_timer_delete	(__NR_timer_create+4)
-#define __NR_clock_settime	(__NR_timer_create+5)
-#define __NR_clock_gettime	(__NR_timer_create+6)
-#define __NR_clock_getres	(__NR_timer_create+7)
-#define __NR_clock_nanosleep	(__NR_timer_create+8)
-#define __NR_statfs64		268
-#define __NR_fstatfs64		269
-#define __NR_tgkill		270
-#define __NR_utimes		271
-#define __NR_fadvise64_64	272
-#define __NR_vserver		273
-#define __NR_mbind		274
-#define __NR_get_mempolicy	275
-#define __NR_set_mempolicy	276
-#define __NR_mq_open 		277
-#define __NR_mq_unlink		(__NR_mq_open+1)
-#define __NR_mq_timedsend	(__NR_mq_open+2)
-#define __NR_mq_timedreceive	(__NR_mq_open+3)
-#define __NR_mq_notify		(__NR_mq_open+4)
-#define __NR_mq_getsetattr	(__NR_mq_open+5)
-#define __NR_kexec_load		283
-#define __NR_waitid		284
-#define __NR_add_key		286
-#define __NR_request_key	287
-#define __NR_keyctl		288
-#define __NR_cacheflush		289
-#define __NR_ioprio_set		290
-#define __NR_ioprio_get		291
-#define __NR_inotify_init	292
-#define __NR_inotify_add_watch	293
-#define __NR_inotify_rm_watch	294
-#define __NR_migrate_pages	295
-#define __NR_openat		296
-#define __NR_mkdirat		297
-#define __NR_mknodat		298
-#define __NR_fchownat		299
-#define __NR_futimesat		300
-#define __NR_fstatat64		301
-#define __NR_unlinkat		302
-#define __NR_renameat		303
-#define __NR_linkat		304
-#define __NR_symlinkat		305
-#define __NR_readlinkat		306
-#define __NR_fchmodat		307
-#define __NR_faccessat		308
-#define __NR_pselect6		309
-#define __NR_ppoll		310
-#define __NR_unshare		311
-#define __NR_set_robust_list	312
-#define __NR_get_robust_list	313
-#define __NR_splice		314
-#define __NR_sync_file_range	315
-#define __NR_tee		316
-#define __NR_vmsplice		317
-#define __NR_move_pages		318
-#define __NR_getcpu		319
-#define __NR_epoll_pwait	320
-#define __NR_utimensat		321
-#define __NR_signalfd		322
-#define __NR_timerfd_create	323
-#define __NR_eventfd		324
-#define __NR_fallocate		325
-#define __NR_timerfd_settime	326
-#define __NR_timerfd_gettime	327
-#define __NR_signalfd4		328
-#define __NR_eventfd2		329
-#define __NR_epoll_create1	330
-#define __NR_dup3		331
-#define __NR_pipe2		332
-#define __NR_inotify_init1	333
-#define __NR_preadv		334
-#define __NR_pwritev		335
-#define __NR_rt_tgsigqueueinfo	336
-#define __NR_perf_event_open	337
-#define __NR_recvmmsg		338
-#define __NR_setns		339
-
-#ifdef __KERNEL__
 
 #define NR_syscalls 340
 
@@ -395,5 +56,4 @@
 #define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
 #endif
 
-#endif /* __KERNEL__ */
 #endif /* _ASM_UNISTD_H */
diff --git a/arch/mn10300/include/uapi/asm/Kbuild b/arch/mn10300/include/uapi/asm/Kbuild
index baebb3d..040178c 100644
--- a/arch/mn10300/include/uapi/asm/Kbuild
+++ b/arch/mn10300/include/uapi/asm/Kbuild
@@ -1,3 +1,34 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += byteorder.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += kvm_para.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += param.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ptrace.h
+header-y += resource.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += unistd.h
diff --git a/arch/mn10300/include/asm/auxvec.h b/arch/mn10300/include/uapi/asm/auxvec.h
similarity index 100%
rename from arch/mn10300/include/asm/auxvec.h
rename to arch/mn10300/include/uapi/asm/auxvec.h
diff --git a/arch/mn10300/include/asm/bitsperlong.h b/arch/mn10300/include/uapi/asm/bitsperlong.h
similarity index 100%
rename from arch/mn10300/include/asm/bitsperlong.h
rename to arch/mn10300/include/uapi/asm/bitsperlong.h
diff --git a/arch/mn10300/include/asm/byteorder.h b/arch/mn10300/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/mn10300/include/asm/byteorder.h
rename to arch/mn10300/include/uapi/asm/byteorder.h
diff --git a/arch/mn10300/include/asm/errno.h b/arch/mn10300/include/uapi/asm/errno.h
similarity index 100%
rename from arch/mn10300/include/asm/errno.h
rename to arch/mn10300/include/uapi/asm/errno.h
diff --git a/arch/mn10300/include/asm/fcntl.h b/arch/mn10300/include/uapi/asm/fcntl.h
similarity index 100%
rename from arch/mn10300/include/asm/fcntl.h
rename to arch/mn10300/include/uapi/asm/fcntl.h
diff --git a/arch/mn10300/include/asm/ioctl.h b/arch/mn10300/include/uapi/asm/ioctl.h
similarity index 100%
rename from arch/mn10300/include/asm/ioctl.h
rename to arch/mn10300/include/uapi/asm/ioctl.h
diff --git a/arch/mn10300/include/asm/ioctls.h b/arch/mn10300/include/uapi/asm/ioctls.h
similarity index 100%
rename from arch/mn10300/include/asm/ioctls.h
rename to arch/mn10300/include/uapi/asm/ioctls.h
diff --git a/arch/mn10300/include/asm/ipcbuf.h b/arch/mn10300/include/uapi/asm/ipcbuf.h
similarity index 100%
rename from arch/mn10300/include/asm/ipcbuf.h
rename to arch/mn10300/include/uapi/asm/ipcbuf.h
diff --git a/arch/mn10300/include/asm/kvm_para.h b/arch/mn10300/include/uapi/asm/kvm_para.h
similarity index 100%
rename from arch/mn10300/include/asm/kvm_para.h
rename to arch/mn10300/include/uapi/asm/kvm_para.h
diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/uapi/asm/mman.h
similarity index 100%
rename from arch/mn10300/include/asm/mman.h
rename to arch/mn10300/include/uapi/asm/mman.h
diff --git a/arch/mn10300/include/asm/msgbuf.h b/arch/mn10300/include/uapi/asm/msgbuf.h
similarity index 100%
rename from arch/mn10300/include/asm/msgbuf.h
rename to arch/mn10300/include/uapi/asm/msgbuf.h
diff --git a/arch/mn10300/include/asm/param.h b/arch/mn10300/include/uapi/asm/param.h
similarity index 100%
rename from arch/mn10300/include/asm/param.h
rename to arch/mn10300/include/uapi/asm/param.h
diff --git a/arch/mn10300/include/asm/poll.h b/arch/mn10300/include/uapi/asm/poll.h
similarity index 100%
rename from arch/mn10300/include/asm/poll.h
rename to arch/mn10300/include/uapi/asm/poll.h
diff --git a/arch/mn10300/include/asm/posix_types.h b/arch/mn10300/include/uapi/asm/posix_types.h
similarity index 100%
rename from arch/mn10300/include/asm/posix_types.h
rename to arch/mn10300/include/uapi/asm/posix_types.h
diff --git a/arch/mn10300/include/uapi/asm/ptrace.h b/arch/mn10300/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..71b2251
--- /dev/null
+++ b/arch/mn10300/include/uapi/asm/ptrace.h
@@ -0,0 +1,84 @@
+/* MN10300 Exception frame layout and ptrace constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _UAPI_ASM_PTRACE_H
+#define _UAPI_ASM_PTRACE_H
+
+#define PT_A3		0
+#define PT_A2		1
+#define PT_D3		2
+#define	PT_D2		3
+#define PT_MCVF		4
+#define	PT_MCRL		5
+#define PT_MCRH		6
+#define	PT_MDRQ		7
+#define	PT_E1		8
+#define	PT_E0		9
+#define	PT_E7		10
+#define	PT_E6		11
+#define	PT_E5		12
+#define	PT_E4		13
+#define	PT_E3		14
+#define	PT_E2		15
+#define	PT_SP		16
+#define	PT_LAR		17
+#define	PT_LIR		18
+#define	PT_MDR		19
+#define	PT_A1		20
+#define	PT_A0		21
+#define	PT_D1		22
+#define	PT_D0		23
+#define PT_ORIG_D0	24
+#define	PT_EPSW		25
+#define	PT_PC		26
+#define NR_PTREGS	27
+
+/*
+ * This defines the way registers are stored in the event of an exception
+ * - the strange order is due to the MOVM instruction
+ */
+struct pt_regs {
+	unsigned long		a3;		/* syscall arg 3 */
+	unsigned long		a2;		/* syscall arg 4 */
+	unsigned long		d3;		/* syscall arg 5 */
+	unsigned long		d2;		/* syscall arg 6 */
+	unsigned long		mcvf;
+	unsigned long		mcrl;
+	unsigned long		mcrh;
+	unsigned long		mdrq;
+	unsigned long		e1;
+	unsigned long		e0;
+	unsigned long		e7;
+	unsigned long		e6;
+	unsigned long		e5;
+	unsigned long		e4;
+	unsigned long		e3;
+	unsigned long		e2;
+	unsigned long		sp;
+	unsigned long		lar;
+	unsigned long		lir;
+	unsigned long		mdr;
+	unsigned long		a1;
+	unsigned long		a0;		/* syscall arg 1 */
+	unsigned long		d1;		/* syscall arg 2 */
+	unsigned long		d0;		/* syscall ret */
+	struct pt_regs		*next;		/* next frame pointer */
+	unsigned long		orig_d0;	/* syscall number */
+	unsigned long		epsw;
+	unsigned long		pc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+
+#endif /* _UAPI_ASM_PTRACE_H */
diff --git a/arch/mn10300/include/asm/resource.h b/arch/mn10300/include/uapi/asm/resource.h
similarity index 100%
rename from arch/mn10300/include/asm/resource.h
rename to arch/mn10300/include/uapi/asm/resource.h
diff --git a/arch/mn10300/include/asm/sembuf.h b/arch/mn10300/include/uapi/asm/sembuf.h
similarity index 100%
rename from arch/mn10300/include/asm/sembuf.h
rename to arch/mn10300/include/uapi/asm/sembuf.h
diff --git a/arch/mn10300/include/uapi/asm/setup.h b/arch/mn10300/include/uapi/asm/setup.h
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/arch/mn10300/include/uapi/asm/setup.h
diff --git a/arch/mn10300/include/asm/shmbuf.h b/arch/mn10300/include/uapi/asm/shmbuf.h
similarity index 100%
rename from arch/mn10300/include/asm/shmbuf.h
rename to arch/mn10300/include/uapi/asm/shmbuf.h
diff --git a/arch/mn10300/include/asm/sigcontext.h b/arch/mn10300/include/uapi/asm/sigcontext.h
similarity index 100%
rename from arch/mn10300/include/asm/sigcontext.h
rename to arch/mn10300/include/uapi/asm/sigcontext.h
diff --git a/arch/mn10300/include/asm/siginfo.h b/arch/mn10300/include/uapi/asm/siginfo.h
similarity index 100%
rename from arch/mn10300/include/asm/siginfo.h
rename to arch/mn10300/include/uapi/asm/siginfo.h
diff --git a/arch/mn10300/include/uapi/asm/signal.h b/arch/mn10300/include/uapi/asm/signal.h
new file mode 100644
index 0000000..08dcd6a
--- /dev/null
+++ b/arch/mn10300/include/uapi/asm/signal.h
@@ -0,0 +1,131 @@
+/* MN10300 Signal definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _UAPI_ASM_SIGNAL_H
+#define _UAPI_ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001U
+#define SA_NOCLDWAIT	0x00000002U
+#define SA_SIGINFO	0x00000004U
+#define SA_ONSTACK	0x08000000U
+#define SA_RESTART	0x10000000U
+#define SA_NODEFER	0x40000000U
+#define SA_RESETHAND	0x80000000U
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal-defs.h>
+
+#ifndef __KERNEL__
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user	*ss_sp;
+	int		ss_flags;
+	size_t		ss_size;
+} stack_t;
+
+
+#endif /* _UAPI_ASM_SIGNAL_H */
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/uapi/asm/socket.h
similarity index 100%
rename from arch/mn10300/include/asm/socket.h
rename to arch/mn10300/include/uapi/asm/socket.h
diff --git a/arch/mn10300/include/asm/sockios.h b/arch/mn10300/include/uapi/asm/sockios.h
similarity index 100%
rename from arch/mn10300/include/asm/sockios.h
rename to arch/mn10300/include/uapi/asm/sockios.h
diff --git a/arch/mn10300/include/asm/stat.h b/arch/mn10300/include/uapi/asm/stat.h
similarity index 100%
rename from arch/mn10300/include/asm/stat.h
rename to arch/mn10300/include/uapi/asm/stat.h
diff --git a/arch/mn10300/include/asm/statfs.h b/arch/mn10300/include/uapi/asm/statfs.h
similarity index 100%
rename from arch/mn10300/include/asm/statfs.h
rename to arch/mn10300/include/uapi/asm/statfs.h
diff --git a/arch/mn10300/include/asm/swab.h b/arch/mn10300/include/uapi/asm/swab.h
similarity index 100%
rename from arch/mn10300/include/asm/swab.h
rename to arch/mn10300/include/uapi/asm/swab.h
diff --git a/arch/mn10300/include/asm/termbits.h b/arch/mn10300/include/uapi/asm/termbits.h
similarity index 100%
rename from arch/mn10300/include/asm/termbits.h
rename to arch/mn10300/include/uapi/asm/termbits.h
diff --git a/arch/mn10300/include/uapi/asm/termios.h b/arch/mn10300/include/uapi/asm/termios.h
new file mode 100644
index 0000000..11d3cc9
--- /dev/null
+++ b/arch/mn10300/include/uapi/asm/termios.h
@@ -0,0 +1,83 @@
+#ifndef _UAPI_ASM_TERMIOS_H
+#define _UAPI_ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+#define TIOCM_MODEM_BITS       TIOCM_OUT2      /* IRDA support */
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp, &(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+	copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) \
+	copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) \
+	copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) \
+	copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* _UAPI_ASM_TERMIOS_H */
diff --git a/arch/mn10300/include/uapi/asm/types.h b/arch/mn10300/include/uapi/asm/types.h
new file mode 100644
index 0000000..8b3f050
--- /dev/null
+++ b/arch/mn10300/include/uapi/asm/types.h
@@ -0,0 +1,11 @@
+/* MN10300 Basic type definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm-generic/int-ll64.h>
diff --git a/arch/mn10300/include/uapi/asm/unistd.h b/arch/mn10300/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..e28ac3f
--- /dev/null
+++ b/arch/mn10300/include/uapi/asm/unistd.h
@@ -0,0 +1,354 @@
+/* MN10300 System call number list
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _UAPI_ASM_UNISTD_H
+#define _UAPI_ASM_UNISTD_H
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_madvise1		219	/* delete when C lib stub is removed */
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+/* 223 is unused */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind		274
+#define __NR_get_mempolicy	275
+#define __NR_set_mempolicy	276
+#define __NR_mq_open 		277
+#define __NR_mq_unlink		(__NR_mq_open+1)
+#define __NR_mq_timedsend	(__NR_mq_open+2)
+#define __NR_mq_timedreceive	(__NR_mq_open+3)
+#define __NR_mq_notify		(__NR_mq_open+4)
+#define __NR_mq_getsetattr	(__NR_mq_open+5)
+#define __NR_kexec_load		283
+#define __NR_waitid		284
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+#define __NR_cacheflush		289
+#define __NR_ioprio_set		290
+#define __NR_ioprio_get		291
+#define __NR_inotify_init	292
+#define __NR_inotify_add_watch	293
+#define __NR_inotify_rm_watch	294
+#define __NR_migrate_pages	295
+#define __NR_openat		296
+#define __NR_mkdirat		297
+#define __NR_mknodat		298
+#define __NR_fchownat		299
+#define __NR_futimesat		300
+#define __NR_fstatat64		301
+#define __NR_unlinkat		302
+#define __NR_renameat		303
+#define __NR_linkat		304
+#define __NR_symlinkat		305
+#define __NR_readlinkat		306
+#define __NR_fchmodat		307
+#define __NR_faccessat		308
+#define __NR_pselect6		309
+#define __NR_ppoll		310
+#define __NR_unshare		311
+#define __NR_set_robust_list	312
+#define __NR_get_robust_list	313
+#define __NR_splice		314
+#define __NR_sync_file_range	315
+#define __NR_tee		316
+#define __NR_vmsplice		317
+#define __NR_move_pages		318
+#define __NR_getcpu		319
+#define __NR_epoll_pwait	320
+#define __NR_utimensat		321
+#define __NR_signalfd		322
+#define __NR_timerfd_create	323
+#define __NR_eventfd		324
+#define __NR_fallocate		325
+#define __NR_timerfd_settime	326
+#define __NR_timerfd_gettime	327
+#define __NR_signalfd4		328
+#define __NR_eventfd2		329
+#define __NR_epoll_create1	330
+#define __NR_dup3		331
+#define __NR_pipe2		332
+#define __NR_inotify_init1	333
+#define __NR_preadv		334
+#define __NR_pwritev		335
+#define __NR_rt_tgsigqueueinfo	336
+#define __NR_perf_event_open	337
+#define __NR_recvmmsg		338
+#define __NR_setns		339
+
+#endif /* _UAPI_ASM_UNISTD_H */
diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild
index 7140b6b..78de680 100644
--- a/arch/openrisc/include/asm/Kbuild
+++ b/arch/openrisc/include/asm/Kbuild
@@ -1,6 +1,4 @@
-include include/asm-generic/Kbuild.asm
 
-header-y += elf.h
 header-y += ucontext.h
 
 generic-y += atomic.h
diff --git a/arch/openrisc/include/asm/elf.h b/arch/openrisc/include/asm/elf.h
index 225a7ff..f4aa8a5 100644
--- a/arch/openrisc/include/asm/elf.h
+++ b/arch/openrisc/include/asm/elf.h
@@ -15,60 +15,12 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
 #ifndef __ASM_OPENRISC_ELF_H
 #define __ASM_OPENRISC_ELF_H
 
-/*
- * This files is partially exported to userspace.  This allows us to keep
- * the ELF bits in one place which should assist in keeping the kernel and
- * userspace in sync.
- */
-
-/*
- * ELF register definitions..
- */
-
-/* for struct user_regs_struct definition */
-#include <asm/ptrace.h>
-
-/* The OR1K relocation types... not all relevant for module loader */
-#define R_OR32_NONE	0
-#define R_OR32_32	1
-#define R_OR32_16	2
-#define R_OR32_8	3
-#define R_OR32_CONST	4
-#define R_OR32_CONSTH	5
-#define R_OR32_JUMPTARG	6
-#define R_OR32_VTINHERIT 7
-#define R_OR32_VTENTRY	8
-
-typedef unsigned long elf_greg_t;
-
-/*
- * Note that NGREG is defined to ELF_NGREG in include/linux/elfcore.h, and is
- * thus exposed to user-space.
- */
-#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-/* A placeholder; OR32 does not have fp support yes, so no fp regs for now.  */
-typedef unsigned long elf_fpregset_t;
-
-/* This should be moved to include/linux/elf.h */
-#define EM_OR32         0x8472
-#define EM_OPENRISC     92     /* OpenRISC 32-bit embedded processor */
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_ARCH	EM_OR32
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2MSB
-
-#ifdef __KERNEL__
 
 #include <linux/types.h>
+#include <uapi/asm/elf.h>
 
 /*
  * This is used to ensure we don't load something for the wrong architecture.
@@ -113,5 +65,4 @@
 #define SET_PERSONALITY(ex) \
 	set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/arch/openrisc/include/asm/processor.h b/arch/openrisc/include/asm/processor.h
index 30462f1..43decdb 100644
--- a/arch/openrisc/include/asm/processor.h
+++ b/arch/openrisc/include/asm/processor.h
@@ -103,7 +103,7 @@
 
 #define init_stack      (init_thread_union.stack)
 
-#define cpu_relax()     do { } while (0)
+#define cpu_relax()     barrier()
 
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_OPENRISC_PROCESSOR_H */
diff --git a/arch/openrisc/include/asm/ptrace.h b/arch/openrisc/include/asm/ptrace.h
index 8555c0c..6ca1726 100644
--- a/arch/openrisc/include/asm/ptrace.h
+++ b/arch/openrisc/include/asm/ptrace.h
@@ -15,25 +15,12 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
 #ifndef __ASM_OPENRISC_PTRACE_H
 #define __ASM_OPENRISC_PTRACE_H
 
-#ifndef __ASSEMBLY__
-/*
- * This is the layout of the regset returned by the GETREGSET ptrace call
- */
-struct user_regs_struct {
-	/* GPR R0-R31... */
-	unsigned long gpr[32];
-	unsigned long pc;
-	unsigned long sr;
-};
-#endif
-
-#ifdef __KERNEL__
 
 #include <asm/spr_defs.h>
+#include <uapi/asm/ptrace.h>
 
 /*
  * Make kernel PTrace/register structures opaque to userspace... userspace can
@@ -134,6 +121,4 @@
 #define PT_ORIG_GPR11 132
 #define PT_SYSCALLNO  136
 
-#endif /* __KERNEL__ */
-
 #endif /* __ASM_OPENRISC_PTRACE_H */
diff --git a/arch/openrisc/include/uapi/asm/Kbuild b/arch/openrisc/include/uapi/asm/Kbuild
index baebb3d..80761eb 100644
--- a/arch/openrisc/include/uapi/asm/Kbuild
+++ b/arch/openrisc/include/uapi/asm/Kbuild
@@ -1,3 +1,10 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+header-y += byteorder.h
+header-y += elf.h
+header-y += kvm_para.h
+header-y += param.h
+header-y += ptrace.h
+header-y += sigcontext.h
+header-y += unistd.h
diff --git a/arch/openrisc/include/asm/byteorder.h b/arch/openrisc/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/openrisc/include/asm/byteorder.h
rename to arch/openrisc/include/uapi/asm/byteorder.h
diff --git a/arch/openrisc/include/uapi/asm/elf.h b/arch/openrisc/include/uapi/asm/elf.h
new file mode 100644
index 0000000..f02ea58
--- /dev/null
+++ b/arch/openrisc/include/uapi/asm/elf.h
@@ -0,0 +1,69 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UAPI__ASM_OPENRISC_ELF_H
+#define _UAPI__ASM_OPENRISC_ELF_H
+
+/*
+ * This files is partially exported to userspace.  This allows us to keep
+ * the ELF bits in one place which should assist in keeping the kernel and
+ * userspace in sync.
+ */
+
+/*
+ * ELF register definitions..
+ */
+
+/* for struct user_regs_struct definition */
+#include <asm/ptrace.h>
+
+/* The OR1K relocation types... not all relevant for module loader */
+#define R_OR32_NONE	0
+#define R_OR32_32	1
+#define R_OR32_16	2
+#define R_OR32_8	3
+#define R_OR32_CONST	4
+#define R_OR32_CONSTH	5
+#define R_OR32_JUMPTARG	6
+#define R_OR32_VTINHERIT 7
+#define R_OR32_VTENTRY	8
+
+typedef unsigned long elf_greg_t;
+
+/*
+ * Note that NGREG is defined to ELF_NGREG in include/linux/elfcore.h, and is
+ * thus exposed to user-space.
+ */
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* A placeholder; OR32 does not have fp support yes, so no fp regs for now.  */
+typedef unsigned long elf_fpregset_t;
+
+/* This should be moved to include/linux/elf.h */
+#define EM_OR32         0x8472
+#define EM_OPENRISC     92     /* OpenRISC 32-bit embedded processor */
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH	EM_OR32
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+
+#endif /* _UAPI__ASM_OPENRISC_ELF_H */
diff --git a/arch/openrisc/include/asm/kvm_para.h b/arch/openrisc/include/uapi/asm/kvm_para.h
similarity index 100%
rename from arch/openrisc/include/asm/kvm_para.h
rename to arch/openrisc/include/uapi/asm/kvm_para.h
diff --git a/arch/openrisc/include/asm/param.h b/arch/openrisc/include/uapi/asm/param.h
similarity index 100%
rename from arch/openrisc/include/asm/param.h
rename to arch/openrisc/include/uapi/asm/param.h
diff --git a/arch/openrisc/include/uapi/asm/ptrace.h b/arch/openrisc/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..9760bd1
--- /dev/null
+++ b/arch/openrisc/include/uapi/asm/ptrace.h
@@ -0,0 +1,35 @@
+/*
+ * OpenRISC Linux
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * OpenRISC implementation:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ * et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UAPI__ASM_OPENRISC_PTRACE_H
+#define _UAPI__ASM_OPENRISC_PTRACE_H
+
+#ifndef __ASSEMBLY__
+/*
+ * This is the layout of the regset returned by the GETREGSET ptrace call
+ */
+struct user_regs_struct {
+	/* GPR R0-R31... */
+	unsigned long gpr[32];
+	unsigned long pc;
+	unsigned long sr;
+};
+#endif
+
+
+#endif /* _UAPI__ASM_OPENRISC_PTRACE_H */
diff --git a/arch/openrisc/include/asm/sigcontext.h b/arch/openrisc/include/uapi/asm/sigcontext.h
similarity index 100%
rename from arch/openrisc/include/asm/sigcontext.h
rename to arch/openrisc/include/uapi/asm/sigcontext.h
diff --git a/arch/openrisc/include/asm/unistd.h b/arch/openrisc/include/uapi/asm/unistd.h
similarity index 100%
rename from arch/openrisc/include/asm/unistd.h
rename to arch/openrisc/include/uapi/asm/unistd.h
diff --git a/arch/openrisc/kernel/irq.c b/arch/openrisc/kernel/irq.c
index e935b9d..8ec77bc 100644
--- a/arch/openrisc/kernel/irq.c
+++ b/arch/openrisc/kernel/irq.c
@@ -46,19 +46,19 @@
 
 static void or1k_pic_mask(struct irq_data *data)
 {
-	mtspr(SPR_PICMR, mfspr(SPR_PICMR) & ~(1UL << data->irq));
+	mtspr(SPR_PICMR, mfspr(SPR_PICMR) & ~(1UL << data->hwirq));
 }
 
 static void or1k_pic_unmask(struct irq_data *data)
 {
-	mtspr(SPR_PICMR, mfspr(SPR_PICMR) | (1UL << data->irq));
+	mtspr(SPR_PICMR, mfspr(SPR_PICMR) | (1UL << data->hwirq));
 }
 
 static void or1k_pic_ack(struct irq_data *data)
 {
 	/* EDGE-triggered interrupts need to be ack'ed in order to clear
 	 * the latch.
-	 * LEVER-triggered interrupts do not need to be ack'ed; however,
+	 * LEVEL-triggered interrupts do not need to be ack'ed; however,
 	 * ack'ing the interrupt has no ill-effect and is quicker than
 	 * trying to figure out what type it is...
 	 */
@@ -75,10 +75,10 @@
 	 *     as opposed to a 1 as mandated by the spec
 	 */
 
-	mtspr(SPR_PICSR, mfspr(SPR_PICSR) & ~(1UL << data->irq));
+	mtspr(SPR_PICSR, mfspr(SPR_PICSR) & ~(1UL << data->hwirq));
 #else
-	WARN(1, "Interrupt handling possibily broken\n");
-	mtspr(SPR_PICSR, (1UL << irq));
+	WARN(1, "Interrupt handling possibly broken\n");
+	mtspr(SPR_PICSR, (1UL << data->hwirq));
 #endif
 }
 
@@ -87,10 +87,12 @@
 	/* Comments for pic_ack apply here, too */
 
 #ifdef CONFIG_OR1K_1200
-	mtspr(SPR_PICSR, mfspr(SPR_PICSR) & ~(1UL << data->irq));
+	mtspr(SPR_PICMR, mfspr(SPR_PICMR) & ~(1UL << data->hwirq));
+	mtspr(SPR_PICSR, mfspr(SPR_PICSR) & ~(1UL << data->hwirq));
 #else
-	WARN(1, "Interrupt handling possibily broken\n");
-	mtspr(SPR_PICSR, (1UL << irq));
+	WARN(1, "Interrupt handling possibly broken\n");
+	mtspr(SPR_PICMR, (1UL << data->hwirq));
+	mtspr(SPR_PICSR, (1UL << data->hwirq));
 #endif
 }
 
diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c
index 55210f3..c35f3ab 100644
--- a/arch/openrisc/kernel/process.c
+++ b/arch/openrisc/kernel/process.c
@@ -271,7 +271,7 @@
 			    struct pt_regs *regs)
 {
 	int error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname(name);
 	error = PTR_ERR(filename);
@@ -279,7 +279,7 @@
 	if (IS_ERR(filename))
 		goto out;
 
-	error = do_execve(filename, argv, envp, regs);
+	error = do_execve(filename->name, argv, envp, regs);
 	putname(filename);
 
 out:
diff --git a/arch/openrisc/kernel/ptrace.c b/arch/openrisc/kernel/ptrace.c
index e71781d..71a2a0c 100644
--- a/arch/openrisc/kernel/ptrace.c
+++ b/arch/openrisc/kernel/ptrace.c
@@ -187,7 +187,7 @@
 		 */
 		ret = -1L;
 
-	audit_syscall_entry(audit_arch(), regs->gpr[11],
+	audit_syscall_entry(AUDIT_ARCH_OPENRISC, regs->gpr[11],
 			    regs->gpr[3], regs->gpr[4],
 			    regs->gpr[5], regs->gpr[6]);
 
diff --git a/arch/openrisc/lib/delay.c b/arch/openrisc/lib/delay.c
index 01d9740..c330767 100644
--- a/arch/openrisc/lib/delay.c
+++ b/arch/openrisc/lib/delay.c
@@ -30,9 +30,9 @@
 
 void __delay(unsigned long cycles)
 {
-	cycles_t target = get_cycles() + cycles;
+	cycles_t start = get_cycles();
 
-	while (get_cycles() < target)
+	while ((get_cycles() - start) < cycles)
 		cpu_relax();
 }
 EXPORT_SYMBOL(__delay);
@@ -41,7 +41,7 @@
 {
 	unsigned long long loops;
 
-	loops = xloops * loops_per_jiffy * HZ;
+	loops = (unsigned long long)xloops * loops_per_jiffy * HZ;
 
 	__delay(loops >> 32);
 }
diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index 6785de7..a0760b8 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -34,14 +34,14 @@
 int hpux_execve(struct pt_regs *regs)
 {
 	int error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname((const char __user *) regs->gr[26]);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
 
-	error = do_execve(filename,
+	error = do_execve(filename->name,
 			  (const char __user *const __user *) regs->gr[25],
 			  (const char __user *const __user *) regs->gr[24],
 			  regs);
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 8c6b6b6..cbc3721 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -342,13 +342,13 @@
 asmlinkage int sys_execve(struct pt_regs *regs)
 {
 	int error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname((const char __user *) regs->gr[26]);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = do_execve(filename,
+	error = do_execve(filename->name,
 			  (const char __user *const __user *) regs->gr[25],
 			  (const char __user *const __user *) regs->gr[24],
 			  regs);
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index dc9a624..bf5b93a 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -60,14 +60,14 @@
 asmlinkage int sys32_execve(struct pt_regs *regs)
 {
 	int error;
-	char *filename;
+	struct filename *filename;
 
 	DBG(("sys32_execve(%p) r26 = 0x%lx\n", regs, regs->gr[26]));
 	filename = getname((const char __user *) regs->gr[26]);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = compat_do_execve(filename, compat_ptr(regs->gr[25]),
+	error = compat_do_execve(filename->name, compat_ptr(regs->gr[25]),
 				 compat_ptr(regs->gr[24]), regs);
 	putname(filename);
 out:
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 78d6588..969f3d9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -137,7 +137,7 @@
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_CMOS_UPDATE
-	select GENERIC_TIME_VSYSCALL
+	select GENERIC_TIME_VSYSCALL_OLD
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
index ace53db..a4fe15e 100644
--- a/arch/powerpc/include/asm/Kbuild
+++ b/arch/powerpc/include/asm/Kbuild
@@ -1,39 +1,4 @@
-include include/asm-generic/Kbuild.asm
 
-header-y += auxvec.h
-header-y += bootx.h
-header-y += byteorder.h
-header-y += cputable.h
-header-y += elf.h
-header-y += errno.h
-header-y += fcntl.h
-header-y += ioctl.h
-header-y += ioctls.h
-header-y += ipcbuf.h
-header-y += linkage.h
-header-y += msgbuf.h
-header-y += nvram.h
-header-y += param.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ps3fb.h
-header-y += resource.h
-header-y += seccomp.h
-header-y += sembuf.h
-header-y += shmbuf.h
-header-y += sigcontext.h
-header-y += siginfo.h
-header-y += signal.h
-header-y += socket.h
-header-y += sockios.h
-header-y += spu_info.h
-header-y += stat.h
-header-y += statfs.h
-header-y += termbits.h
-header-y += termios.h
-header-y += types.h
-header-y += ucontext.h
-header-y += unistd.h
 
 generic-y += clkdev.h
 generic-y += rwsem.h
diff --git a/arch/powerpc/include/asm/bootx.h b/arch/powerpc/include/asm/bootx.h
index 60a3c9e..dd94610 100644
--- a/arch/powerpc/include/asm/bootx.h
+++ b/arch/powerpc/include/asm/bootx.h
@@ -5,126 +5,11 @@
  * Written by Benjamin Herrenschmidt.
  */
 
-
 #ifndef __ASM_BOOTX_H__
 #define __ASM_BOOTX_H__
 
-#include <linux/types.h>
+#include <uapi/asm/bootx.h>
 
-#ifdef macintosh
-#include <Types.h>
-#include "linux_type_defs.h"
-#endif
-
-#ifdef macintosh
-/* All this requires PowerPC alignment */
-#pragma options align=power
-#endif
-
-/* On kernel entry:
- *
- * r3 = 0x426f6f58    ('BooX')
- * r4 = pointer to boot_infos
- * r5 = NULL
- *
- * Data and instruction translation disabled, interrupts
- * disabled, kernel loaded at physical 0x00000000 on PCI
- * machines (will be different on NuBus).
- */
-
-#define BOOT_INFO_VERSION               5
-#define BOOT_INFO_COMPATIBLE_VERSION    1
-
-/* Bit in the architecture flag mask. More to be defined in
-   future versions. Note that either BOOT_ARCH_PCI or
-   BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are
-   set additionally when BOOT_ARCH_NUBUS is set.
- */
-#define BOOT_ARCH_PCI                   0x00000001UL
-#define BOOT_ARCH_NUBUS                 0x00000002UL
-#define BOOT_ARCH_NUBUS_PDM             0x00000010UL
-#define BOOT_ARCH_NUBUS_PERFORMA        0x00000020UL
-#define BOOT_ARCH_NUBUS_POWERBOOK       0x00000040UL
-
-/*  Maximum number of ranges in phys memory map */
-#define MAX_MEM_MAP_SIZE				26
-
-/* This is the format of an element in the physical memory map. Note that
-   the map is optional and current BootX will only build it for pre-PCI
-   machines */
-typedef struct boot_info_map_entry
-{
-    __u32       physAddr;                /* Physical starting address */
-    __u32       size;                    /* Size in bytes */
-} boot_info_map_entry_t;
-
-
-/* Here are the boot informations that are passed to the bootstrap
- * Note that the kernel arguments and the device tree are appended
- * at the end of this structure. */
-typedef struct boot_infos
-{
-    /* Version of this structure */
-    __u32       version;
-    /* backward compatible down to version: */
-    __u32       compatible_version;
-
-    /* NEW (vers. 2) this holds the current _logical_ base addr of
-       the frame buffer (for use by early boot message) */
-    __u8*       logicalDisplayBase;
-
-    /* NEW (vers. 4) Apple's machine identification */
-    __u32       machineID;
-
-    /* NEW (vers. 4) Detected hw architecture */
-    __u32       architecture;
-
-    /* The device tree (internal addresses relative to the beginning of the tree,
-     * device tree offset relative to the beginning of this structure).
-     * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this
-     * field is 0.
-     */
-    __u32       deviceTreeOffset;        /* Device tree offset */
-    __u32       deviceTreeSize;          /* Size of the device tree */
-
-    /* Some infos about the current MacOS display */
-    __u32       dispDeviceRect[4];       /* left,top,right,bottom */
-    __u32       dispDeviceDepth;         /* (8, 16 or 32) */
-    __u8*       dispDeviceBase;          /* base address (physical) */
-    __u32       dispDeviceRowBytes;      /* rowbytes (in bytes) */
-    __u32       dispDeviceColorsOffset;  /* Colormap (8 bits only) or 0 (*) */
-    /* Optional offset in the registry to the current
-     * MacOS display. (Can be 0 when not detected) */
-     __u32      dispDeviceRegEntryOffset;
-
-    /* Optional pointer to boot ramdisk (offset from this structure) */
-    __u32       ramDisk;
-    __u32       ramDiskSize;             /* size of ramdisk image */
-
-    /* Kernel command line arguments (offset from this structure) */
-    __u32       kernelParamsOffset;
-
-    /* ALL BELOW NEW (vers. 4) */
-
-    /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
-       (non-PCI) only. On PCI, memory is contiguous and it's size is in the
-       device-tree. */
-    boot_info_map_entry_t
-    	        physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */
-    __u32       physMemoryMapSize;               /* How many entries in map */
-
-
-    /* The framebuffer size (optional, currently 0) */
-    __u32       frameBufferSize;         /* Represents a max size, can be 0. */
-
-    /* NEW (vers. 5) */
-
-    /* Total params size (args + colormap + device tree + ramdisk) */
-    __u32       totalParamsSize;
-
-} boot_infos_t;
-
-#ifdef __KERNEL__
 /* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index
  * is represented by 3 short words containing a 16 bits (unsigned) color
  * component. Later versions may contain the gamma table for direct-color
@@ -162,10 +47,4 @@
 
 extern void bootx_init(unsigned long r4, unsigned long phys);
 
-#endif /* __KERNEL__ */
-
-#ifdef macintosh
-#pragma options align=reset
-#endif
-
 #endif
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index b3c083d..21a0687 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -1,42 +1,10 @@
 #ifndef __ASM_POWERPC_CPUTABLE_H
 #define __ASM_POWERPC_CPUTABLE_H
 
-#define PPC_FEATURE_32			0x80000000
-#define PPC_FEATURE_64			0x40000000
-#define PPC_FEATURE_601_INSTR		0x20000000
-#define PPC_FEATURE_HAS_ALTIVEC		0x10000000
-#define PPC_FEATURE_HAS_FPU		0x08000000
-#define PPC_FEATURE_HAS_MMU		0x04000000
-#define PPC_FEATURE_HAS_4xxMAC		0x02000000
-#define PPC_FEATURE_UNIFIED_CACHE	0x01000000
-#define PPC_FEATURE_HAS_SPE		0x00800000
-#define PPC_FEATURE_HAS_EFP_SINGLE	0x00400000
-#define PPC_FEATURE_HAS_EFP_DOUBLE	0x00200000
-#define PPC_FEATURE_NO_TB		0x00100000
-#define PPC_FEATURE_POWER4		0x00080000
-#define PPC_FEATURE_POWER5		0x00040000
-#define PPC_FEATURE_POWER5_PLUS		0x00020000
-#define PPC_FEATURE_CELL		0x00010000
-#define PPC_FEATURE_BOOKE		0x00008000
-#define PPC_FEATURE_SMT			0x00004000
-#define PPC_FEATURE_ICACHE_SNOOP	0x00002000
-#define PPC_FEATURE_ARCH_2_05		0x00001000
-#define PPC_FEATURE_PA6T		0x00000800
-#define PPC_FEATURE_HAS_DFP		0x00000400
-#define PPC_FEATURE_POWER6_EXT		0x00000200
-#define PPC_FEATURE_ARCH_2_06		0x00000100
-#define PPC_FEATURE_HAS_VSX		0x00000080
-
-#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \
-					0x00000040
-
-#define PPC_FEATURE_TRUE_LE		0x00000002
-#define PPC_FEATURE_PPC_LE		0x00000001
-
-#ifdef __KERNEL__
 
 #include <asm/asm-compat.h>
 #include <asm/feature-fixups.h>
+#include <uapi/asm/cputable.h>
 
 #ifndef __ASSEMBLY__
 
@@ -557,5 +525,4 @@
 
 #endif /* !__ASSEMBLY__ */
 
-#endif /* __KERNEL__ */
 #endif /* __ASM_POWERPC_CPUTABLE_H */
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index 3bf9cca..6abf0a1 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -1,90 +1,3 @@
-#ifndef _ASM_POWERPC_ELF_H
-#define _ASM_POWERPC_ELF_H
-
-#ifdef __KERNEL__
-#include <linux/sched.h>	/* for task_struct */
-#include <asm/page.h>
-#include <asm/string.h>
-#endif
-
-#include <linux/types.h>
-
-#include <asm/ptrace.h>
-#include <asm/cputable.h>
-#include <asm/auxvec.h>
-
-/* PowerPC relocations defined by the ABIs */
-#define R_PPC_NONE		0
-#define R_PPC_ADDR32		1	/* 32bit absolute address */
-#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
-#define R_PPC_ADDR16		3	/* 16bit absolute address */
-#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
-#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
-#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
-#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
-#define R_PPC_ADDR14_BRTAKEN	8
-#define R_PPC_ADDR14_BRNTAKEN	9
-#define R_PPC_REL24		10	/* PC relative 26 bit */
-#define R_PPC_REL14		11	/* PC relative 16 bit */
-#define R_PPC_REL14_BRTAKEN	12
-#define R_PPC_REL14_BRNTAKEN	13
-#define R_PPC_GOT16		14
-#define R_PPC_GOT16_LO		15
-#define R_PPC_GOT16_HI		16
-#define R_PPC_GOT16_HA		17
-#define R_PPC_PLTREL24		18
-#define R_PPC_COPY		19
-#define R_PPC_GLOB_DAT		20
-#define R_PPC_JMP_SLOT		21
-#define R_PPC_RELATIVE		22
-#define R_PPC_LOCAL24PC		23
-#define R_PPC_UADDR32		24
-#define R_PPC_UADDR16		25
-#define R_PPC_REL32		26
-#define R_PPC_PLT32		27
-#define R_PPC_PLTREL32		28
-#define R_PPC_PLT16_LO		29
-#define R_PPC_PLT16_HI		30
-#define R_PPC_PLT16_HA		31
-#define R_PPC_SDAREL16		32
-#define R_PPC_SECTOFF		33
-#define R_PPC_SECTOFF_LO	34
-#define R_PPC_SECTOFF_HI	35
-#define R_PPC_SECTOFF_HA	36
-
-/* PowerPC relocations defined for the TLS access ABI.  */
-#define R_PPC_TLS		67 /* none	(sym+add)@tls */
-#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
-#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
-#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
-#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
-#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
-#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
-#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
-#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
-#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
-#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
-#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
-
-/* keep this the last entry. */
-#define R_PPC_NUM		95
-
 /*
  * ELF register definitions..
  *
@@ -93,77 +6,14 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#ifndef _ASM_POWERPC_ELF_H
+#define _ASM_POWERPC_ELF_H
 
-#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
-#define ELF_NFPREG	33	/* includes fpscr */
+#include <linux/sched.h>	/* for task_struct */
+#include <asm/page.h>
+#include <asm/string.h>
+#include <uapi/asm/elf.h>
 
-typedef unsigned long elf_greg_t64;
-typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG];
-
-typedef unsigned int elf_greg_t32;
-typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG];
-typedef elf_gregset_t32 compat_elf_gregset_t;
-
-/*
- * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps.
- */
-#ifdef __powerpc64__
-# define ELF_NVRREG32	33	/* includes vscr & vrsave stuffed together */
-# define ELF_NVRREG	34	/* includes vscr & vrsave in split vectors */
-# define ELF_NVSRHALFREG 32	/* Half the vsx registers */
-# define ELF_GREG_TYPE	elf_greg_t64
-#else
-# define ELF_NEVRREG	34	/* includes acc (as 2) */
-# define ELF_NVRREG	33	/* includes vscr */
-# define ELF_GREG_TYPE	elf_greg_t32
-# define ELF_ARCH	EM_PPC
-# define ELF_CLASS	ELFCLASS32
-# define ELF_DATA	ELFDATA2MSB
-#endif /* __powerpc64__ */
-
-#ifndef ELF_ARCH
-# define ELF_ARCH	EM_PPC64
-# define ELF_CLASS	ELFCLASS64
-# define ELF_DATA	ELFDATA2MSB
-  typedef elf_greg_t64 elf_greg_t;
-  typedef elf_gregset_t64 elf_gregset_t;
-#else
-  /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */
-  typedef elf_greg_t32 elf_greg_t;
-  typedef elf_gregset_t32 elf_gregset_t;
-#endif /* ELF_ARCH */
-
-/* Floating point registers */
-typedef double elf_fpreg_t;
-typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
-
-/* Altivec registers */
-/*
- * The entries with indexes 0-31 contain the corresponding vector registers. 
- * The entry with index 32 contains the vscr as the last word (offset 12) 
- * within the quadword.  This allows the vscr to be stored as either a 
- * quadword (since it must be copied via a vector register to/from storage) 
- * or as a word.  
- *
- * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first  
- * word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32 
- * ptrace interface.  This allows signal handling and ptrace to use the same 
- * structures.  This also simplifies the implementation of a bi-arch 
- * (combined (32- and 64-bit) gdb.
- *
- * Note that it's _not_ compatible with 32 bits ucontext which stuffs the
- * vrsave along with vscr and so only uses 33 vectors for the register set
- */
-typedef __vector128 elf_vrreg_t;
-typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
-#ifdef __powerpc64__
-typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32];
-typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG];
-#endif
-
-#ifdef __KERNEL__
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
@@ -277,153 +127,6 @@
 extern unsigned long arch_randomize_brk(struct mm_struct *mm);
 #define arch_randomize_brk arch_randomize_brk
 
-#endif /* __KERNEL__ */
-
-/*
- * The requirements here are:
- * - keep the final alignment of sp (sp & 0xf)
- * - make sure the 32-bit value at the first 16 byte aligned position of
- *   AUXV is greater than 16 for glibc compatibility.
- *   AT_IGNOREPPC is used for that.
- * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
- *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
- * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes
- */
-#define ARCH_DLINFO							\
-do {									\
-	/* Handle glibc compatibility. */				\
-	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
-	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
-	/* Cache size items */						\
-	NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);			\
-	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			\
-	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			\
-	VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base);	\
-} while (0)
-
-/* PowerPC64 relocations defined by the ABIs */
-#define R_PPC64_NONE    R_PPC_NONE
-#define R_PPC64_ADDR32  R_PPC_ADDR32  /* 32bit absolute address.  */
-#define R_PPC64_ADDR24  R_PPC_ADDR24  /* 26bit address, word aligned.  */
-#define R_PPC64_ADDR16  R_PPC_ADDR16  /* 16bit absolute address. */
-#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address.  */
-#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */
-#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits.  */
-#define R_PPC64_ADDR14 R_PPC_ADDR14   /* 16bit address, word aligned.  */
-#define R_PPC64_ADDR14_BRTAKEN  R_PPC_ADDR14_BRTAKEN
-#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
-#define R_PPC64_REL24   R_PPC_REL24 /* PC relative 26 bit, word aligned.  */
-#define R_PPC64_REL14   R_PPC_REL14 /* PC relative 16 bit. */
-#define R_PPC64_REL14_BRTAKEN   R_PPC_REL14_BRTAKEN
-#define R_PPC64_REL14_BRNTAKEN  R_PPC_REL14_BRNTAKEN
-#define R_PPC64_GOT16     R_PPC_GOT16
-#define R_PPC64_GOT16_LO  R_PPC_GOT16_LO
-#define R_PPC64_GOT16_HI  R_PPC_GOT16_HI
-#define R_PPC64_GOT16_HA  R_PPC_GOT16_HA
-
-#define R_PPC64_COPY      R_PPC_COPY
-#define R_PPC64_GLOB_DAT  R_PPC_GLOB_DAT
-#define R_PPC64_JMP_SLOT  R_PPC_JMP_SLOT
-#define R_PPC64_RELATIVE  R_PPC_RELATIVE
-
-#define R_PPC64_UADDR32   R_PPC_UADDR32
-#define R_PPC64_UADDR16   R_PPC_UADDR16
-#define R_PPC64_REL32     R_PPC_REL32
-#define R_PPC64_PLT32     R_PPC_PLT32
-#define R_PPC64_PLTREL32  R_PPC_PLTREL32
-#define R_PPC64_PLT16_LO  R_PPC_PLT16_LO
-#define R_PPC64_PLT16_HI  R_PPC_PLT16_HI
-#define R_PPC64_PLT16_HA  R_PPC_PLT16_HA
-
-#define R_PPC64_SECTOFF     R_PPC_SECTOFF
-#define R_PPC64_SECTOFF_LO  R_PPC_SECTOFF_LO
-#define R_PPC64_SECTOFF_HI  R_PPC_SECTOFF_HI
-#define R_PPC64_SECTOFF_HA  R_PPC_SECTOFF_HA
-#define R_PPC64_ADDR30          37  /* word30 (S + A - P) >> 2.  */
-#define R_PPC64_ADDR64          38  /* doubleword64 S + A.  */
-#define R_PPC64_ADDR16_HIGHER   39  /* half16 #higher(S + A).  */
-#define R_PPC64_ADDR16_HIGHERA  40  /* half16 #highera(S + A).  */
-#define R_PPC64_ADDR16_HIGHEST  41  /* half16 #highest(S + A).  */
-#define R_PPC64_ADDR16_HIGHESTA 42  /* half16 #highesta(S + A). */
-#define R_PPC64_UADDR64     43  /* doubleword64 S + A.  */
-#define R_PPC64_REL64       44  /* doubleword64 S + A - P.  */
-#define R_PPC64_PLT64       45  /* doubleword64 L + A.  */
-#define R_PPC64_PLTREL64    46  /* doubleword64 L + A - P.  */
-#define R_PPC64_TOC16       47  /* half16* S + A - .TOC.  */
-#define R_PPC64_TOC16_LO    48  /* half16 #lo(S + A - .TOC.).  */
-#define R_PPC64_TOC16_HI    49  /* half16 #hi(S + A - .TOC.).  */
-#define R_PPC64_TOC16_HA    50  /* half16 #ha(S + A - .TOC.).  */
-#define R_PPC64_TOC         51  /* doubleword64 .TOC. */
-#define R_PPC64_PLTGOT16    52  /* half16* M + A.  */
-#define R_PPC64_PLTGOT16_LO 53  /* half16 #lo(M + A).  */
-#define R_PPC64_PLTGOT16_HI 54  /* half16 #hi(M + A).  */
-#define R_PPC64_PLTGOT16_HA 55  /* half16 #ha(M + A).  */
-
-#define R_PPC64_ADDR16_DS      56 /* half16ds* (S + A) >> 2.  */
-#define R_PPC64_ADDR16_LO_DS   57 /* half16ds  #lo(S + A) >> 2.  */
-#define R_PPC64_GOT16_DS       58 /* half16ds* (G + A) >> 2.  */
-#define R_PPC64_GOT16_LO_DS    59 /* half16ds  #lo(G + A) >> 2.  */
-#define R_PPC64_PLT16_LO_DS    60 /* half16ds  #lo(L + A) >> 2.  */
-#define R_PPC64_SECTOFF_DS     61 /* half16ds* (R + A) >> 2.  */
-#define R_PPC64_SECTOFF_LO_DS  62 /* half16ds  #lo(R + A) >> 2.  */
-#define R_PPC64_TOC16_DS       63 /* half16ds* (S + A - .TOC.) >> 2.  */
-#define R_PPC64_TOC16_LO_DS    64 /* half16ds  #lo(S + A - .TOC.) >> 2.  */
-#define R_PPC64_PLTGOT16_DS    65 /* half16ds* (M + A) >> 2.  */
-#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds  #lo(M + A) >> 2.  */
-
-/* PowerPC64 relocations defined for the TLS access ABI.  */
-#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
-#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
-#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
-#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
-#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
-#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
-#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
-#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
-#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
-#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
-#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
-#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
-#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
-#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
-#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
-#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
-#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
-#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
-#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
-#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
-#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
-#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
-#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
-#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
-#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
-#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
-#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
-#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
-#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
-#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
-#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
-#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
-#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
-#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
-#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
-#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
-#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
-#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
-#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
-#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
-
-/* Keep this the last entry.  */
-#define R_PPC64_NUM		107
-
-/* There's actually a third entry here, but it's unused */
-struct ppc64_opd_entry
-{
-	unsigned long funcaddr;
-	unsigned long r2;
-};
-
-#ifdef  __KERNEL__
 
 #ifdef CONFIG_SPU_BASE
 /* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */
@@ -433,6 +136,4 @@
 
 #endif /* CONFIG_SPU_BASE */
 
-#endif /* __KERNEL */
-
 #endif /* _ASM_POWERPC_ELF_H */
diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h
index c18916b..9365860 100644
--- a/arch/powerpc/include/asm/kvm_para.h
+++ b/arch/powerpc/include/asm/kvm_para.h
@@ -16,77 +16,11 @@
  *
  * Authors: Hollis Blanchard <hollisb@us.ibm.com>
  */
-
 #ifndef __POWERPC_KVM_PARA_H__
 #define __POWERPC_KVM_PARA_H__
 
-#include <linux/types.h>
+#include <uapi/asm/kvm_para.h>
 
-/*
- * Additions to this struct must only occur at the end, and should be
- * accompanied by a KVM_MAGIC_FEAT flag to advertise that they are present
- * (albeit not necessarily relevant to the current target hardware platform).
- *
- * Struct fields are always 32 or 64 bit aligned, depending on them being 32
- * or 64 bit wide respectively.
- *
- * See Documentation/virtual/kvm/ppc-pv.txt
- */
-struct kvm_vcpu_arch_shared {
-	__u64 scratch1;
-	__u64 scratch2;
-	__u64 scratch3;
-	__u64 critical;		/* Guest may not get interrupts if == r1 */
-	__u64 sprg0;
-	__u64 sprg1;
-	__u64 sprg2;
-	__u64 sprg3;
-	__u64 srr0;
-	__u64 srr1;
-	__u64 dar;		/* dear on BookE */
-	__u64 msr;
-	__u32 dsisr;
-	__u32 int_pending;	/* Tells the guest if we have an interrupt */
-	__u32 sr[16];
-	__u32 mas0;
-	__u32 mas1;
-	__u64 mas7_3;
-	__u64 mas2;
-	__u32 mas4;
-	__u32 mas6;
-	__u32 esr;
-	__u32 pir;
-
-	/*
-	 * SPRG4-7 are user-readable, so we can only keep these consistent
-	 * between the shared area and the real registers when there's an
-	 * intervening exit to KVM.  This also applies to SPRG3 on some
-	 * chips.
-	 *
-	 * This suffices for access by guest userspace, since in PR-mode
-	 * KVM, an exit must occur when changing the guest's MSR[PR].
-	 * If the guest kernel writes to SPRG3-7 via the shared area, it
-	 * must also use the shared area for reading while in kernel space.
-	 */
-	__u64 sprg4;
-	__u64 sprg5;
-	__u64 sprg6;
-	__u64 sprg7;
-};
-
-#define KVM_SC_MAGIC_R0		0x4b564d21 /* "KVM!" */
-#define HC_VENDOR_KVM		(42 << 16)
-#define HC_EV_SUCCESS		0
-#define HC_EV_UNIMPLEMENTED	12
-
-#define KVM_FEATURE_MAGIC_PAGE	1
-
-#define KVM_MAGIC_FEAT_SR		(1 << 0)
-
-/* MASn, ESR, PIR, and high SPRGs */
-#define KVM_MAGIC_FEAT_MAS0_TO_SPRG7	(1 << 1)
-
-#ifdef __KERNEL__
 
 #ifdef CONFIG_KVM_GUEST
 
@@ -211,6 +145,4 @@
 	return false;
 }
 
-#endif /* __KERNEL__ */
-
 #endif /* __POWERPC_KVM_PARA_H__ */
diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h
index d4a7f64..8565c25 100644
--- a/arch/powerpc/include/asm/mman.h
+++ b/arch/powerpc/include/asm/mman.h
@@ -1,34 +1,14 @@
-#ifndef _ASM_POWERPC_MMAN_H
-#define _ASM_POWERPC_MMAN_H
-
-#include <asm-generic/mman-common.h>
-
 /*
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#ifndef _ASM_POWERPC_MMAN_H
+#define _ASM_POWERPC_MMAN_H
 
-#define PROT_SAO	0x10		/* Strong Access Ordering */
+#include <uapi/asm/mman.h>
 
-#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
-#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
-#define MAP_LOCKED	0x80
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-
-#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
-#define MCL_FUTURE      0x4000          /* lock all additions to address space */
-
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
-
-#ifdef __KERNEL__
 #ifdef CONFIG_PPC64
 
 #include <asm/cputable.h>
@@ -61,5 +41,4 @@
 #define arch_validate_prot(prot) arch_validate_prot(prot)
 
 #endif /* CONFIG_PPC64 */
-#endif /* __KERNEL__ */
 #endif	/* _ASM_POWERPC_MMAN_H */
diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h
index 9d1aafe..b0fe0fe 100644
--- a/arch/powerpc/include/asm/nvram.h
+++ b/arch/powerpc/include/asm/nvram.h
@@ -6,29 +6,13 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-
 #ifndef _ASM_POWERPC_NVRAM_H
 #define _ASM_POWERPC_NVRAM_H
 
-/* Signatures for nvram partitions */
-#define NVRAM_SIG_SP	0x02	/* support processor */
-#define NVRAM_SIG_OF	0x50	/* open firmware config */
-#define NVRAM_SIG_FW	0x51	/* general firmware */
-#define NVRAM_SIG_HW	0x52	/* hardware (VPD) */
-#define NVRAM_SIG_FLIP	0x5a	/* Apple flip/flop header */
-#define NVRAM_SIG_APPL	0x5f	/* Apple "system" (???) */
-#define NVRAM_SIG_SYS	0x70	/* system env vars */
-#define NVRAM_SIG_CFG	0x71	/* config data */
-#define NVRAM_SIG_ELOG	0x72	/* error log */
-#define NVRAM_SIG_VEND	0x7e	/* vendor defined */
-#define NVRAM_SIG_FREE	0x7f	/* Free space */
-#define NVRAM_SIG_OS	0xa0	/* OS defined */
-#define NVRAM_SIG_PANIC	0xa1	/* Apple OSX "panic" */
-
-#ifdef __KERNEL__
 
 #include <linux/errno.h>
 #include <linux/list.h>
+#include <uapi/asm/nvram.h>
 
 #ifdef CONFIG_PPC_PSERIES
 extern int nvram_write_error_log(char * buff, int length,
@@ -56,17 +40,6 @@
 extern int nvram_get_partition_size(loff_t data_index);
 extern loff_t nvram_find_partition(const char *name, int sig, int *out_size);
 
-#endif /* __KERNEL__ */
-
-/* PowerMac specific nvram stuffs */
-
-enum {
-	pmac_nvram_OF,		/* Open Firmware partition */
-	pmac_nvram_XPRAM,	/* MacOS XPRAM partition */
-	pmac_nvram_NR		/* MacOS Name Registry partition */
-};
-
-#ifdef __KERNEL__
 /* Return partition offset in nvram */
 extern int	pmac_get_partition(int partition);
 
@@ -83,30 +56,4 @@
 /* Normal access to NVRAM */
 extern unsigned char nvram_read_byte(int i);
 extern void nvram_write_byte(unsigned char c, int i);
-#endif
-
-/* Some offsets in XPRAM */
-#define PMAC_XPRAM_MACHINE_LOC	0xe4
-#define PMAC_XPRAM_SOUND_VOLUME	0x08
-
-/* Machine location structure in PowerMac XPRAM */
-struct pmac_machine_location {
-	unsigned int	latitude;	/* 2+30 bit Fractional number */
-	unsigned int	longitude;	/* 2+30 bit Fractional number */
-	unsigned int	delta;		/* mix of GMT delta and DLS */
-};
-
-/*
- * /dev/nvram ioctls
- *
- * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is
- * definitely obsolete. Do not use it if you can avoid it
- */
-
-#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \
-				_IOWR('p', 0x40, int)
-
-#define IOC_NVRAM_GET_OFFSET	_IOWR('p', 0x42, int)	/* Get NVRAM partition offset */
-#define IOC_NVRAM_SYNC		_IO('p', 0x43)		/* Sync NVRAM image */
-
 #endif /* _ASM_POWERPC_NVRAM_H */
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index f76b88c..5f99568 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -1,6 +1,3 @@
-#ifndef _ASM_POWERPC_PTRACE_H
-#define _ASM_POWERPC_PTRACE_H
-
 /*
  * Copyright (C) 2001 PPC64 Team, IBM Corp
  *
@@ -23,37 +20,11 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#ifndef _ASM_POWERPC_PTRACE_H
+#define _ASM_POWERPC_PTRACE_H
 
-#include <linux/types.h>
+#include <uapi/asm/ptrace.h>
 
-#ifndef __ASSEMBLY__
-
-struct pt_regs {
-	unsigned long gpr[32];
-	unsigned long nip;
-	unsigned long msr;
-	unsigned long orig_gpr3;	/* Used for restarting system calls */
-	unsigned long ctr;
-	unsigned long link;
-	unsigned long xer;
-	unsigned long ccr;
-#ifdef __powerpc64__
-	unsigned long softe;		/* Soft enabled/disabled */
-#else
-	unsigned long mq;		/* 601 only (not used at present) */
-					/* Used on APUS to hold IPL value. */
-#endif
-	unsigned long trap;		/* Reason for being here */
-	/* N.B. for critical exceptions on 4xx, the dar and dsisr
-	   fields are overloaded to hold srr0 and srr1. */
-	unsigned long dar;		/* Fault registers */
-	unsigned long dsisr;		/* on 4xx/Book-E used for ESR */
-	unsigned long result;		/* Result of a system call */
-};
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
 
 #ifdef __powerpc64__
 
@@ -222,219 +193,12 @@
 
 #endif /* __ASSEMBLY__ */
 
-#endif /* __KERNEL__ */
-
-/*
- * Offsets used by 'ptrace' system call interface.
- * These can't be changed without breaking binary compatibility
- * with MkLinux, etc.
- */
-#define PT_R0	0
-#define PT_R1	1
-#define PT_R2	2
-#define PT_R3	3
-#define PT_R4	4
-#define PT_R5	5
-#define PT_R6	6
-#define PT_R7	7
-#define PT_R8	8
-#define PT_R9	9
-#define PT_R10	10
-#define PT_R11	11
-#define PT_R12	12
-#define PT_R13	13
-#define PT_R14	14
-#define PT_R15	15
-#define PT_R16	16
-#define PT_R17	17
-#define PT_R18	18
-#define PT_R19	19
-#define PT_R20	20
-#define PT_R21	21
-#define PT_R22	22
-#define PT_R23	23
-#define PT_R24	24
-#define PT_R25	25
-#define PT_R26	26
-#define PT_R27	27
-#define PT_R28	28
-#define PT_R29	29
-#define PT_R30	30
-#define PT_R31	31
-
-#define PT_NIP	32
-#define PT_MSR	33
-#define PT_ORIG_R3 34
-#define PT_CTR	35
-#define PT_LNK	36
-#define PT_XER	37
-#define PT_CCR	38
 #ifndef __powerpc64__
-#define PT_MQ	39
-#else
-#define PT_SOFTE 39
-#endif
-#define PT_TRAP	40
-#define PT_DAR	41
-#define PT_DSISR 42
-#define PT_RESULT 43
-#define PT_REGS_COUNT 44
-
-#define PT_FPR0	48	/* each FP reg occupies 2 slots in this space */
-
-#ifndef __powerpc64__
-
-#define PT_FPR31 (PT_FPR0 + 2*31)
-#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
-
 #else /* __powerpc64__ */
-
-#define PT_FPSCR (PT_FPR0 + 32)	/* each FP reg occupies 1 slot in 64-bit space */
-
-#ifdef __KERNEL__
 #define PT_FPSCR32 (PT_FPR0 + 2*32 + 1)	/* each FP reg occupies 2 32-bit userspace slots */
-#endif
-
-#define PT_VR0 82	/* each Vector reg occupies 2 slots in 64-bit */
-#define PT_VSCR (PT_VR0 + 32*2 + 1)
-#define PT_VRSAVE (PT_VR0 + 33*2)
-
-#ifdef __KERNEL__
 #define PT_VR0_32 164	/* each Vector reg occupies 4 slots in 32-bit */
 #define PT_VSCR_32 (PT_VR0 + 32*4 + 3)
 #define PT_VRSAVE_32 (PT_VR0 + 33*4)
-#endif
-
-/*
- * Only store first 32 VSRs here. The second 32 VSRs in VR0-31
- */
-#define PT_VSR0 150	/* each VSR reg occupies 2 slots in 64-bit */
-#define PT_VSR31 (PT_VSR0 + 2*31)
-#ifdef __KERNEL__
 #define PT_VSR0_32 300 	/* each VSR reg occupies 4 slots in 32-bit */
-#endif
 #endif /* __powerpc64__ */
-
-/*
- * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
- * The transfer totals 34 quadword.  Quadwords 0-31 contain the
- * corresponding vector registers.  Quadword 32 contains the vscr as the
- * last word (offset 12) within that quadword.  Quadword 33 contains the
- * vrsave as the first word (offset 0) within the quadword.
- *
- * This definition of the VMX state is compatible with the current PPC32
- * ptrace interface.  This allows signal handling and ptrace to use the same
- * structures.  This also simplifies the implementation of a bi-arch
- * (combined (32- and 64-bit) gdb.
- */
-#define PTRACE_GETVRREGS	18
-#define PTRACE_SETVRREGS	19
-
-/* Get/set all the upper 32-bits of the SPE registers, accumulator, and
- * spefscr, in one go */
-#define PTRACE_GETEVRREGS	20
-#define PTRACE_SETEVRREGS	21
-
-/* Get the first 32 128bit VSX registers */
-#define PTRACE_GETVSRREGS	27
-#define PTRACE_SETVSRREGS	28
-
-/*
- * Get or set a debug register. The first 16 are DABR registers and the
- * second 16 are IABR registers.
- */
-#define PTRACE_GET_DEBUGREG	25
-#define PTRACE_SET_DEBUGREG	26
-
-/* (new) PTRACE requests using the same numbers as x86 and the same
- * argument ordering. Additionally, they support more registers too
- */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#define PTRACE_GETREGS64	  22
-#define PTRACE_SETREGS64	  23
-
-/* Calls to trace a 64bit program from a 32bit program */
-#define PPC_PTRACE_PEEKTEXT_3264 0x95
-#define PPC_PTRACE_PEEKDATA_3264 0x94
-#define PPC_PTRACE_POKETEXT_3264 0x93
-#define PPC_PTRACE_POKEDATA_3264 0x92
-#define PPC_PTRACE_PEEKUSR_3264  0x91
-#define PPC_PTRACE_POKEUSR_3264  0x90
-
-#define PTRACE_SINGLEBLOCK	0x100	/* resume execution until next branch */
-
-#define PPC_PTRACE_GETHWDBGINFO	0x89
-#define PPC_PTRACE_SETHWDEBUG	0x88
-#define PPC_PTRACE_DELHWDEBUG	0x87
-
-#ifndef __ASSEMBLY__
-
-struct ppc_debug_info {
-	__u32 version;			/* Only version 1 exists to date */
-	__u32 num_instruction_bps;
-	__u32 num_data_bps;
-	__u32 num_condition_regs;
-	__u32 data_bp_alignment;
-	__u32 sizeof_condition;		/* size of the DVC register */
-	__u64 features;
-};
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * features will have bits indication whether there is support for:
- */
-#define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x0000000000000001
-#define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x0000000000000002
-#define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x0000000000000004
-#define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x0000000000000008
-
-#ifndef __ASSEMBLY__
-
-struct ppc_hw_breakpoint {
-	__u32 version;		/* currently, version must be 1 */
-	__u32 trigger_type;	/* only some combinations allowed */
-	__u32 addr_mode;	/* address match mode */
-	__u32 condition_mode;	/* break/watchpoint condition flags */
-	__u64 addr;		/* break/watchpoint address */
-	__u64 addr2;		/* range end or mask */
-	__u64 condition_value;	/* contents of the DVC register */
-};
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * Trigger Type
- */
-#define PPC_BREAKPOINT_TRIGGER_EXECUTE	0x00000001
-#define PPC_BREAKPOINT_TRIGGER_READ	0x00000002
-#define PPC_BREAKPOINT_TRIGGER_WRITE	0x00000004
-#define PPC_BREAKPOINT_TRIGGER_RW	\
-	(PPC_BREAKPOINT_TRIGGER_READ | PPC_BREAKPOINT_TRIGGER_WRITE)
-
-/*
- * Address Mode
- */
-#define PPC_BREAKPOINT_MODE_EXACT		0x00000000
-#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE	0x00000001
-#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE	0x00000002
-#define PPC_BREAKPOINT_MODE_MASK		0x00000003
-
-/*
- * Condition Mode
- */
-#define PPC_BREAKPOINT_CONDITION_MODE	0x00000003
-#define PPC_BREAKPOINT_CONDITION_NONE	0x00000000
-#define PPC_BREAKPOINT_CONDITION_AND	0x00000001
-#define PPC_BREAKPOINT_CONDITION_EXACT	PPC_BREAKPOINT_CONDITION_AND
-#define PPC_BREAKPOINT_CONDITION_OR	0x00000002
-#define PPC_BREAKPOINT_CONDITION_AND_OR	0x00000003
-#define PPC_BREAKPOINT_CONDITION_BE_ALL	0x00ff0000
-#define PPC_BREAKPOINT_CONDITION_BE_SHIFT	16
-#define PPC_BREAKPOINT_CONDITION_BE(n)	\
-	(1<<((n)+PPC_BREAKPOINT_CONDITION_BE_SHIFT))
-
 #endif /* _ASM_POWERPC_PTRACE_H */
diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h
index 3eb13be..189998b 100644
--- a/arch/powerpc/include/asm/signal.h
+++ b/arch/powerpc/include/asm/signal.h
@@ -1,149 +1,8 @@
 #ifndef _ASM_POWERPC_SIGNAL_H
 #define _ASM_POWERPC_SIGNAL_H
 
-#include <linux/types.h>
+#include <uapi/asm/signal.h>
 
-#define _NSIG		64
-#ifdef __powerpc64__
-#define _NSIG_BPW	64
-#else
-#define _NSIG_BPW	32
-#endif
-#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t;		/* at least 32 bits */
-
-typedef struct {
-	unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-#define SIGBUS		 7
-#define SIGFPE		 8
-#define SIGKILL		 9
-#define SIGUSR1		10
-#define SIGSEGV		11
-#define SIGUSR2		12
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGSTKFLT	16
-#define SIGCHLD		17
-#define SIGCONT		18
-#define SIGSTOP		19
-#define SIGTSTP		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGURG		23
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGIO		29
-#define SIGPOLL		SIGIO
-/*
-#define SIGLOST		29
-*/
-#define SIGPWR		30
-#define SIGSYS		31
-#define	SIGUNUSED	31
-
-/* These should not be considered constants from userland.  */
-#define SIGRTMIN	32
-#define SIGRTMAX	_NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP	0x00000001U
-#define SA_NOCLDWAIT	0x00000002U
-#define SA_SIGINFO	0x00000004U
-#define SA_ONSTACK	0x08000000U
-#define SA_RESTART	0x10000000U
-#define SA_NODEFER	0x40000000U
-#define SA_RESETHAND	0x80000000U
-
-#define SA_NOMASK	SA_NODEFER
-#define SA_ONESHOT	SA_RESETHAND
-
-#define SA_RESTORER	0x04000000U
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	2048
-#define SIGSTKSZ	8192
-
-#include <asm-generic/signal-defs.h>
-
-struct old_sigaction {
-	__sighandler_t sa_handler;
-	old_sigset_t sa_mask;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-};
-
-struct sigaction {
-	__sighandler_t sa_handler;
-	unsigned long sa_flags;
-	__sigrestore_t sa_restorer;
-	sigset_t sa_mask;		/* mask last for extensibility */
-};
-
-struct k_sigaction {
-	struct sigaction sa;
-};
-
-typedef struct sigaltstack {
-	void __user *ss_sp;
-	int ss_flags;
-	size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
 struct pt_regs;
 #define ptrace_signal_deliver(regs, cookie) do { } while (0)
-#endif /* __KERNEL__ */
-
-#ifndef __powerpc64__
-/*
- * These are parameters to dbg_sigreturn syscall.  They enable or
- * disable certain debugging things that can be done from signal
- * handlers.  The dbg_sigreturn syscall *must* be called from a
- * SA_SIGINFO signal so the ucontext can be passed to it.  It takes an
- * array of struct sig_dbg_op, which has the debug operations to
- * perform before returning from the signal.
- */
-struct sig_dbg_op {
-	int dbg_type;
-	unsigned long dbg_value;
-};
-
-/* Enable or disable single-stepping.  The value sets the state. */
-#define SIG_DBG_SINGLE_STEPPING		1
-
-/* Enable or disable branch tracing.  The value sets the state. */
-#define SIG_DBG_BRANCH_TRACING		2
-#endif /* ! __powerpc64__ */
-
 #endif /* _ASM_POWERPC_SIGNAL_H */
diff --git a/arch/powerpc/include/asm/spu_info.h b/arch/powerpc/include/asm/spu_info.h
index 1286c82..7146b78 100644
--- a/arch/powerpc/include/asm/spu_info.h
+++ b/arch/powerpc/include/asm/spu_info.h
@@ -19,37 +19,10 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-
 #ifndef _SPU_INFO_H
 #define _SPU_INFO_H
 
-#include <linux/types.h>
-
-#ifdef __KERNEL__
 #include <asm/spu.h>
-#else
-struct mfc_cq_sr {
-	__u64 mfc_cq_data0_RW;
-	__u64 mfc_cq_data1_RW;
-	__u64 mfc_cq_data2_RW;
-	__u64 mfc_cq_data3_RW;
-};
-#endif /* __KERNEL__ */
-
-struct spu_dma_info {
-	__u64 dma_info_type;
-	__u64 dma_info_mask;
-	__u64 dma_info_status;
-	__u64 dma_info_stall_and_notify;
-	__u64 dma_info_atomic_command_status;
-	struct mfc_cq_sr dma_info_command_data[16];
-};
-
-struct spu_proxydma_info {
-	__u64 proxydma_info_type;
-	__u64 proxydma_info_mask;
-	__u64 proxydma_info_status;
-	struct mfc_cq_sr proxydma_info_command_data[8];
-};
+#include <uapi/asm/spu_info.h>
 
 #endif
diff --git a/arch/powerpc/include/asm/swab.h b/arch/powerpc/include/asm/swab.h
index c581e3e..b9bd1ca 100644
--- a/arch/powerpc/include/asm/swab.h
+++ b/arch/powerpc/include/asm/swab.h
@@ -1,24 +1,18 @@
-#ifndef _ASM_POWERPC_SWAB_H
-#define _ASM_POWERPC_SWAB_H
-
 /*
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#ifndef _ASM_POWERPC_SWAB_H
+#define _ASM_POWERPC_SWAB_H
 
-#include <linux/types.h>
-#include <linux/compiler.h>
+#include <uapi/asm/swab.h>
 
 #ifdef __GNUC__
-
 #ifndef __powerpc64__
-#define __SWAB_64_THRU_32__
 #endif /* __powerpc64__ */
 
-#ifdef __KERNEL__
-
 static __inline__ __u16 ld_le16(const volatile __u16 *addr)
 {
 	__u16 val;
@@ -83,8 +77,5 @@
 }
 #define __arch_swab32 __arch_swab32
 
-#endif /* __KERNEL__ */
-
 #endif /* __GNUC__ */
-
 #endif /* _ASM_POWERPC_SWAB_H */
diff --git a/arch/powerpc/include/asm/termios.h b/arch/powerpc/include/asm/termios.h
index a24f487..b8353e2 100644
--- a/arch/powerpc/include/asm/termios.h
+++ b/arch/powerpc/include/asm/termios.h
@@ -1,6 +1,3 @@
-#ifndef _ASM_POWERPC_TERMIOS_H
-#define _ASM_POWERPC_TERMIOS_H
-
 /*
  * Liberally adapted from alpha/termios.h.  In particular, the c_cc[]
  * fields have been reordered so that termio & termios share the
@@ -12,74 +9,14 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#ifndef _ASM_POWERPC_TERMIOS_H
+#define _ASM_POWERPC_TERMIOS_H
 
-#include <asm/ioctls.h>
-#include <asm/termbits.h>
+#include <uapi/asm/termios.h>
 
-struct sgttyb {
-	char	sg_ispeed;
-	char	sg_ospeed;
-	char	sg_erase;
-	char	sg_kill;
-	short	sg_flags;
-};
-
-struct tchars {
-	char	t_intrc;
-	char	t_quitc;
-	char	t_startc;
-	char	t_stopc;
-	char	t_eofc;
-	char	t_brkc;
-};
-
-struct ltchars {
-	char	t_suspc;
-	char	t_dsuspc;
-	char	t_rprntc;
-	char	t_flushc;
-	char	t_werasc;
-	char	t_lnextc;
-};
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 10
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* c_cc characters */
-#define _VINTR	0
-#define _VQUIT	1
-#define _VERASE	2
-#define _VKILL	3
-#define _VEOF	4
-#define _VMIN	5
-#define _VEOL	6
-#define _VTIME	7
-#define _VEOL2	8
-#define _VSWTC	9
-
-#ifdef __KERNEL__
 /*                   ^C  ^\ del  ^U  ^D   1   0   0   0   0  ^W  ^R  ^Z  ^Q  ^S  ^V  ^U  */
 #define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" 
-#endif
-
-#ifdef __KERNEL__
 
 #include <asm-generic/termios-base.h>
 
-#endif	/* __KERNEL__ */
-
 #endif	/* _ASM_POWERPC_TERMIOS_H */
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
index 0abf7f2..bfb6ded 100644
--- a/arch/powerpc/include/asm/types.h
+++ b/arch/powerpc/include/asm/types.h
@@ -1,22 +1,3 @@
-#ifndef _ASM_POWERPC_TYPES_H
-#define _ASM_POWERPC_TYPES_H
-
-/*
- * This is here because we used to use l64 for 64bit powerpc
- * and we don't want to impact user mode with our change to ll64
- * in the kernel.
- *
- * However, some user programs are fine with this.  They can
- * flag __SANE_USERSPACE_TYPES__ to get int-ll64.h here.
- */
-#if !defined(__SANE_USERSPACE_TYPES__) && defined(__powerpc64__) && !defined(__KERNEL__)
-# include <asm-generic/int-l64.h>
-#else
-# include <asm-generic/int-ll64.h>
-#endif
-
-#ifndef __ASSEMBLY__
-
 /*
  * This file is never included by application software unless
  * explicitly requested (e.g., via linux/types.h) in which case the
@@ -29,14 +10,11 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#ifndef _ASM_POWERPC_TYPES_H
+#define _ASM_POWERPC_TYPES_H
 
-typedef struct {
-	__u32 u[4];
-} __attribute__((aligned(16))) __vector128;
+#include <uapi/asm/types.h>
 
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 
 typedef __vector128 vector128;
@@ -49,6 +27,4 @@
 
 #endif /* __ASSEMBLY__ */
 
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_POWERPC_TYPES_H */
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 2533752..921dce6 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -1,6 +1,3 @@
-#ifndef _ASM_POWERPC_UNISTD_H_
-#define _ASM_POWERPC_UNISTD_H_
-
 /*
  * This file contains the system call numbers.
  *
@@ -9,374 +6,11 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
+#ifndef _ASM_POWERPC_UNISTD_H_
+#define _ASM_POWERPC_UNISTD_H_
 
-#define __NR_restart_syscall	  0
-#define __NR_exit		  1
-#define __NR_fork		  2
-#define __NR_read		  3
-#define __NR_write		  4
-#define __NR_open		  5
-#define __NR_close		  6
-#define __NR_waitpid		  7
-#define __NR_creat		  8
-#define __NR_link		  9
-#define __NR_unlink		 10
-#define __NR_execve		 11
-#define __NR_chdir		 12
-#define __NR_time		 13
-#define __NR_mknod		 14
-#define __NR_chmod		 15
-#define __NR_lchown		 16
-#define __NR_break		 17
-#define __NR_oldstat		 18
-#define __NR_lseek		 19
-#define __NR_getpid		 20
-#define __NR_mount		 21
-#define __NR_umount		 22
-#define __NR_setuid		 23
-#define __NR_getuid		 24
-#define __NR_stime		 25
-#define __NR_ptrace		 26
-#define __NR_alarm		 27
-#define __NR_oldfstat		 28
-#define __NR_pause		 29
-#define __NR_utime		 30
-#define __NR_stty		 31
-#define __NR_gtty		 32
-#define __NR_access		 33
-#define __NR_nice		 34
-#define __NR_ftime		 35
-#define __NR_sync		 36
-#define __NR_kill		 37
-#define __NR_rename		 38
-#define __NR_mkdir		 39
-#define __NR_rmdir		 40
-#define __NR_dup		 41
-#define __NR_pipe		 42
-#define __NR_times		 43
-#define __NR_prof		 44
-#define __NR_brk		 45
-#define __NR_setgid		 46
-#define __NR_getgid		 47
-#define __NR_signal		 48
-#define __NR_geteuid		 49
-#define __NR_getegid		 50
-#define __NR_acct		 51
-#define __NR_umount2		 52
-#define __NR_lock		 53
-#define __NR_ioctl		 54
-#define __NR_fcntl		 55
-#define __NR_mpx		 56
-#define __NR_setpgid		 57
-#define __NR_ulimit		 58
-#define __NR_oldolduname	 59
-#define __NR_umask		 60
-#define __NR_chroot		 61
-#define __NR_ustat		 62
-#define __NR_dup2		 63
-#define __NR_getppid		 64
-#define __NR_getpgrp		 65
-#define __NR_setsid		 66
-#define __NR_sigaction		 67
-#define __NR_sgetmask		 68
-#define __NR_ssetmask		 69
-#define __NR_setreuid		 70
-#define __NR_setregid		 71
-#define __NR_sigsuspend		 72
-#define __NR_sigpending		 73
-#define __NR_sethostname	 74
-#define __NR_setrlimit		 75
-#define __NR_getrlimit		 76
-#define __NR_getrusage		 77
-#define __NR_gettimeofday	 78
-#define __NR_settimeofday	 79
-#define __NR_getgroups		 80
-#define __NR_setgroups		 81
-#define __NR_select		 82
-#define __NR_symlink		 83
-#define __NR_oldlstat		 84
-#define __NR_readlink		 85
-#define __NR_uselib		 86
-#define __NR_swapon		 87
-#define __NR_reboot		 88
-#define __NR_readdir		 89
-#define __NR_mmap		 90
-#define __NR_munmap		 91
-#define __NR_truncate		 92
-#define __NR_ftruncate		 93
-#define __NR_fchmod		 94
-#define __NR_fchown		 95
-#define __NR_getpriority	 96
-#define __NR_setpriority	 97
-#define __NR_profil		 98
-#define __NR_statfs		 99
-#define __NR_fstatfs		100
-#define __NR_ioperm		101
-#define __NR_socketcall		102
-#define __NR_syslog		103
-#define __NR_setitimer		104
-#define __NR_getitimer		105
-#define __NR_stat		106
-#define __NR_lstat		107
-#define __NR_fstat		108
-#define __NR_olduname		109
-#define __NR_iopl		110
-#define __NR_vhangup		111
-#define __NR_idle		112
-#define __NR_vm86		113
-#define __NR_wait4		114
-#define __NR_swapoff		115
-#define __NR_sysinfo		116
-#define __NR_ipc		117
-#define __NR_fsync		118
-#define __NR_sigreturn		119
-#define __NR_clone		120
-#define __NR_setdomainname	121
-#define __NR_uname		122
-#define __NR_modify_ldt		123
-#define __NR_adjtimex		124
-#define __NR_mprotect		125
-#define __NR_sigprocmask	126
-#define __NR_create_module	127
-#define __NR_init_module	128
-#define __NR_delete_module	129
-#define __NR_get_kernel_syms	130
-#define __NR_quotactl		131
-#define __NR_getpgid		132
-#define __NR_fchdir		133
-#define __NR_bdflush		134
-#define __NR_sysfs		135
-#define __NR_personality	136
-#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
-#define __NR_setfsuid		138
-#define __NR_setfsgid		139
-#define __NR__llseek		140
-#define __NR_getdents		141
-#define __NR__newselect		142
-#define __NR_flock		143
-#define __NR_msync		144
-#define __NR_readv		145
-#define __NR_writev		146
-#define __NR_getsid		147
-#define __NR_fdatasync		148
-#define __NR__sysctl		149
-#define __NR_mlock		150
-#define __NR_munlock		151
-#define __NR_mlockall		152
-#define __NR_munlockall		153
-#define __NR_sched_setparam		154
-#define __NR_sched_getparam		155
-#define __NR_sched_setscheduler		156
-#define __NR_sched_getscheduler		157
-#define __NR_sched_yield		158
-#define __NR_sched_get_priority_max	159
-#define __NR_sched_get_priority_min	160
-#define __NR_sched_rr_get_interval	161
-#define __NR_nanosleep		162
-#define __NR_mremap		163
-#define __NR_setresuid		164
-#define __NR_getresuid		165
-#define __NR_query_module	166
-#define __NR_poll		167
-#define __NR_nfsservctl		168
-#define __NR_setresgid		169
-#define __NR_getresgid		170
-#define __NR_prctl		171
-#define __NR_rt_sigreturn	172
-#define __NR_rt_sigaction	173
-#define __NR_rt_sigprocmask	174
-#define __NR_rt_sigpending	175
-#define __NR_rt_sigtimedwait	176
-#define __NR_rt_sigqueueinfo	177
-#define __NR_rt_sigsuspend	178
-#define __NR_pread64		179
-#define __NR_pwrite64		180
-#define __NR_chown		181
-#define __NR_getcwd		182
-#define __NR_capget		183
-#define __NR_capset		184
-#define __NR_sigaltstack	185
-#define __NR_sendfile		186
-#define __NR_getpmsg		187	/* some people actually want streams */
-#define __NR_putpmsg		188	/* some people actually want streams */
-#define __NR_vfork		189
-#define __NR_ugetrlimit		190	/* SuS compliant getrlimit */
-#define __NR_readahead		191
-#ifndef __powerpc64__			/* these are 32-bit only */
-#define __NR_mmap2		192
-#define __NR_truncate64		193
-#define __NR_ftruncate64	194
-#define __NR_stat64		195
-#define __NR_lstat64		196
-#define __NR_fstat64		197
-#endif
-#define __NR_pciconfig_read	198
-#define __NR_pciconfig_write	199
-#define __NR_pciconfig_iobase	200
-#define __NR_multiplexer	201
-#define __NR_getdents64		202
-#define __NR_pivot_root		203
-#ifndef __powerpc64__
-#define __NR_fcntl64		204
-#endif
-#define __NR_madvise		205
-#define __NR_mincore		206
-#define __NR_gettid		207
-#define __NR_tkill		208
-#define __NR_setxattr		209
-#define __NR_lsetxattr		210
-#define __NR_fsetxattr		211
-#define __NR_getxattr		212
-#define __NR_lgetxattr		213
-#define __NR_fgetxattr		214
-#define __NR_listxattr		215
-#define __NR_llistxattr		216
-#define __NR_flistxattr		217
-#define __NR_removexattr	218
-#define __NR_lremovexattr	219
-#define __NR_fremovexattr	220
-#define __NR_futex		221
-#define __NR_sched_setaffinity	222
-#define __NR_sched_getaffinity	223
-/* 224 currently unused */
-#define __NR_tuxcall		225
-#ifndef __powerpc64__
-#define __NR_sendfile64		226
-#endif
-#define __NR_io_setup		227
-#define __NR_io_destroy		228
-#define __NR_io_getevents	229
-#define __NR_io_submit		230
-#define __NR_io_cancel		231
-#define __NR_set_tid_address	232
-#define __NR_fadvise64		233
-#define __NR_exit_group		234
-#define __NR_lookup_dcookie	235
-#define __NR_epoll_create	236
-#define __NR_epoll_ctl		237
-#define __NR_epoll_wait		238
-#define __NR_remap_file_pages	239
-#define __NR_timer_create	240
-#define __NR_timer_settime	241
-#define __NR_timer_gettime	242
-#define __NR_timer_getoverrun	243
-#define __NR_timer_delete	244
-#define __NR_clock_settime	245
-#define __NR_clock_gettime	246
-#define __NR_clock_getres	247
-#define __NR_clock_nanosleep	248
-#define __NR_swapcontext	249
-#define __NR_tgkill		250
-#define __NR_utimes		251
-#define __NR_statfs64		252
-#define __NR_fstatfs64		253
-#ifndef __powerpc64__
-#define __NR_fadvise64_64	254
-#endif
-#define __NR_rtas		255
-#define __NR_sys_debug_setcontext 256
-/* Number 257 is reserved for vserver */
-#define __NR_migrate_pages	258
-#define __NR_mbind		259
-#define __NR_get_mempolicy	260
-#define __NR_set_mempolicy	261
-#define __NR_mq_open		262
-#define __NR_mq_unlink		263
-#define __NR_mq_timedsend	264
-#define __NR_mq_timedreceive	265
-#define __NR_mq_notify		266
-#define __NR_mq_getsetattr	267
-#define __NR_kexec_load		268
-#define __NR_add_key		269
-#define __NR_request_key	270
-#define __NR_keyctl		271
-#define __NR_waitid		272
-#define __NR_ioprio_set		273
-#define __NR_ioprio_get		274
-#define __NR_inotify_init	275
-#define __NR_inotify_add_watch	276
-#define __NR_inotify_rm_watch	277
-#define __NR_spu_run		278
-#define __NR_spu_create		279
-#define __NR_pselect6		280
-#define __NR_ppoll		281
-#define __NR_unshare		282
-#define __NR_splice		283
-#define __NR_tee		284
-#define __NR_vmsplice		285
-#define __NR_openat		286
-#define __NR_mkdirat		287
-#define __NR_mknodat		288
-#define __NR_fchownat		289
-#define __NR_futimesat		290
-#ifdef __powerpc64__
-#define __NR_newfstatat		291
-#else
-#define __NR_fstatat64		291
-#endif
-#define __NR_unlinkat		292
-#define __NR_renameat		293
-#define __NR_linkat		294
-#define __NR_symlinkat		295
-#define __NR_readlinkat		296
-#define __NR_fchmodat		297
-#define __NR_faccessat		298
-#define __NR_get_robust_list	299
-#define __NR_set_robust_list	300
-#define __NR_move_pages		301
-#define __NR_getcpu		302
-#define __NR_epoll_pwait	303
-#define __NR_utimensat		304
-#define __NR_signalfd		305
-#define __NR_timerfd_create	306
-#define __NR_eventfd		307
-#define __NR_sync_file_range2	308
-#define __NR_fallocate		309
-#define __NR_subpage_prot	310
-#define __NR_timerfd_settime	311
-#define __NR_timerfd_gettime	312
-#define __NR_signalfd4		313
-#define __NR_eventfd2		314
-#define __NR_epoll_create1	315
-#define __NR_dup3		316
-#define __NR_pipe2		317
-#define __NR_inotify_init1	318
-#define __NR_perf_event_open	319
-#define __NR_preadv		320
-#define __NR_pwritev		321
-#define __NR_rt_tgsigqueueinfo	322
-#define __NR_fanotify_init	323
-#define __NR_fanotify_mark	324
-#define __NR_prlimit64		325
-#define __NR_socket		326
-#define __NR_bind		327
-#define __NR_connect		328
-#define __NR_listen		329
-#define __NR_accept		330
-#define __NR_getsockname	331
-#define __NR_getpeername	332
-#define __NR_socketpair		333
-#define __NR_send		334
-#define __NR_sendto		335
-#define __NR_recv		336
-#define __NR_recvfrom		337
-#define __NR_shutdown		338
-#define __NR_setsockopt		339
-#define __NR_getsockopt		340
-#define __NR_sendmsg		341
-#define __NR_recvmsg		342
-#define __NR_recvmmsg		343
-#define __NR_accept4		344
-#define __NR_name_to_handle_at	345
-#define __NR_open_by_handle_at	346
-#define __NR_clock_adjtime	347
-#define __NR_syncfs		348
-#define __NR_sendmmsg		349
-#define __NR_setns		350
-#define __NR_process_vm_readv	351
-#define __NR_process_vm_writev	352
+#include <uapi/asm/unistd.h>
 
-#ifdef __KERNEL__
 
 #define __NR_syscalls		353
 
@@ -431,6 +65,4 @@
 	asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
 
 #endif		/* __ASSEMBLY__ */
-#endif		/* __KERNEL__ */
-
 #endif /* _ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild
index baebb3d..a33c3c0 100644
--- a/arch/powerpc/include/uapi/asm/Kbuild
+++ b/arch/powerpc/include/uapi/asm/Kbuild
@@ -1,3 +1,44 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += bootx.h
+header-y += byteorder.h
+header-y += cputable.h
+header-y += elf.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += kvm.h
+header-y += kvm_para.h
+header-y += linkage.h
+header-y += mman.h
+header-y += msgbuf.h
+header-y += nvram.h
+header-y += param.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ps3fb.h
+header-y += ptrace.h
+header-y += resource.h
+header-y += seccomp.h
+header-y += sembuf.h
+header-y += setup.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += socket.h
+header-y += sockios.h
+header-y += spu_info.h
+header-y += stat.h
+header-y += statfs.h
+header-y += swab.h
+header-y += termbits.h
+header-y += termios.h
+header-y += types.h
+header-y += ucontext.h
+header-y += unistd.h
diff --git a/arch/powerpc/include/asm/auxvec.h b/arch/powerpc/include/uapi/asm/auxvec.h
similarity index 100%
rename from arch/powerpc/include/asm/auxvec.h
rename to arch/powerpc/include/uapi/asm/auxvec.h
diff --git a/arch/powerpc/include/asm/bitsperlong.h b/arch/powerpc/include/uapi/asm/bitsperlong.h
similarity index 100%
rename from arch/powerpc/include/asm/bitsperlong.h
rename to arch/powerpc/include/uapi/asm/bitsperlong.h
diff --git a/arch/powerpc/include/uapi/asm/bootx.h b/arch/powerpc/include/uapi/asm/bootx.h
new file mode 100644
index 0000000..6e51cf0
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/bootx.h
@@ -0,0 +1,132 @@
+/*
+ * This file describes the structure passed from the BootX application
+ * (for MacOS) when it is used to boot Linux.
+ *
+ * Written by Benjamin Herrenschmidt.
+ */
+
+
+#ifndef _UAPI__ASM_BOOTX_H__
+#define _UAPI__ASM_BOOTX_H__
+
+#include <linux/types.h>
+
+#ifdef macintosh
+#include <Types.h>
+#include "linux_type_defs.h"
+#endif
+
+#ifdef macintosh
+/* All this requires PowerPC alignment */
+#pragma options align=power
+#endif
+
+/* On kernel entry:
+ *
+ * r3 = 0x426f6f58    ('BooX')
+ * r4 = pointer to boot_infos
+ * r5 = NULL
+ *
+ * Data and instruction translation disabled, interrupts
+ * disabled, kernel loaded at physical 0x00000000 on PCI
+ * machines (will be different on NuBus).
+ */
+
+#define BOOT_INFO_VERSION               5
+#define BOOT_INFO_COMPATIBLE_VERSION    1
+
+/* Bit in the architecture flag mask. More to be defined in
+   future versions. Note that either BOOT_ARCH_PCI or
+   BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are
+   set additionally when BOOT_ARCH_NUBUS is set.
+ */
+#define BOOT_ARCH_PCI                   0x00000001UL
+#define BOOT_ARCH_NUBUS                 0x00000002UL
+#define BOOT_ARCH_NUBUS_PDM             0x00000010UL
+#define BOOT_ARCH_NUBUS_PERFORMA        0x00000020UL
+#define BOOT_ARCH_NUBUS_POWERBOOK       0x00000040UL
+
+/*  Maximum number of ranges in phys memory map */
+#define MAX_MEM_MAP_SIZE				26
+
+/* This is the format of an element in the physical memory map. Note that
+   the map is optional and current BootX will only build it for pre-PCI
+   machines */
+typedef struct boot_info_map_entry
+{
+    __u32       physAddr;                /* Physical starting address */
+    __u32       size;                    /* Size in bytes */
+} boot_info_map_entry_t;
+
+
+/* Here are the boot informations that are passed to the bootstrap
+ * Note that the kernel arguments and the device tree are appended
+ * at the end of this structure. */
+typedef struct boot_infos
+{
+    /* Version of this structure */
+    __u32       version;
+    /* backward compatible down to version: */
+    __u32       compatible_version;
+
+    /* NEW (vers. 2) this holds the current _logical_ base addr of
+       the frame buffer (for use by early boot message) */
+    __u8*       logicalDisplayBase;
+
+    /* NEW (vers. 4) Apple's machine identification */
+    __u32       machineID;
+
+    /* NEW (vers. 4) Detected hw architecture */
+    __u32       architecture;
+
+    /* The device tree (internal addresses relative to the beginning of the tree,
+     * device tree offset relative to the beginning of this structure).
+     * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this
+     * field is 0.
+     */
+    __u32       deviceTreeOffset;        /* Device tree offset */
+    __u32       deviceTreeSize;          /* Size of the device tree */
+
+    /* Some infos about the current MacOS display */
+    __u32       dispDeviceRect[4];       /* left,top,right,bottom */
+    __u32       dispDeviceDepth;         /* (8, 16 or 32) */
+    __u8*       dispDeviceBase;          /* base address (physical) */
+    __u32       dispDeviceRowBytes;      /* rowbytes (in bytes) */
+    __u32       dispDeviceColorsOffset;  /* Colormap (8 bits only) or 0 (*) */
+    /* Optional offset in the registry to the current
+     * MacOS display. (Can be 0 when not detected) */
+     __u32      dispDeviceRegEntryOffset;
+
+    /* Optional pointer to boot ramdisk (offset from this structure) */
+    __u32       ramDisk;
+    __u32       ramDiskSize;             /* size of ramdisk image */
+
+    /* Kernel command line arguments (offset from this structure) */
+    __u32       kernelParamsOffset;
+
+    /* ALL BELOW NEW (vers. 4) */
+
+    /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
+       (non-PCI) only. On PCI, memory is contiguous and it's size is in the
+       device-tree. */
+    boot_info_map_entry_t
+    	        physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */
+    __u32       physMemoryMapSize;               /* How many entries in map */
+
+
+    /* The framebuffer size (optional, currently 0) */
+    __u32       frameBufferSize;         /* Represents a max size, can be 0. */
+
+    /* NEW (vers. 5) */
+
+    /* Total params size (args + colormap + device tree + ramdisk) */
+    __u32       totalParamsSize;
+
+} boot_infos_t;
+
+
+#ifdef macintosh
+#pragma options align=reset
+#endif
+
+#endif /* _UAPI__ASM_BOOTX_H__ */
diff --git a/arch/powerpc/include/asm/byteorder.h b/arch/powerpc/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/powerpc/include/asm/byteorder.h
rename to arch/powerpc/include/uapi/asm/byteorder.h
diff --git a/arch/powerpc/include/uapi/asm/cputable.h b/arch/powerpc/include/uapi/asm/cputable.h
new file mode 100644
index 0000000..ed9dd81
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/cputable.h
@@ -0,0 +1,36 @@
+#ifndef _UAPI__ASM_POWERPC_CPUTABLE_H
+#define _UAPI__ASM_POWERPC_CPUTABLE_H
+
+#define PPC_FEATURE_32			0x80000000
+#define PPC_FEATURE_64			0x40000000
+#define PPC_FEATURE_601_INSTR		0x20000000
+#define PPC_FEATURE_HAS_ALTIVEC		0x10000000
+#define PPC_FEATURE_HAS_FPU		0x08000000
+#define PPC_FEATURE_HAS_MMU		0x04000000
+#define PPC_FEATURE_HAS_4xxMAC		0x02000000
+#define PPC_FEATURE_UNIFIED_CACHE	0x01000000
+#define PPC_FEATURE_HAS_SPE		0x00800000
+#define PPC_FEATURE_HAS_EFP_SINGLE	0x00400000
+#define PPC_FEATURE_HAS_EFP_DOUBLE	0x00200000
+#define PPC_FEATURE_NO_TB		0x00100000
+#define PPC_FEATURE_POWER4		0x00080000
+#define PPC_FEATURE_POWER5		0x00040000
+#define PPC_FEATURE_POWER5_PLUS		0x00020000
+#define PPC_FEATURE_CELL		0x00010000
+#define PPC_FEATURE_BOOKE		0x00008000
+#define PPC_FEATURE_SMT			0x00004000
+#define PPC_FEATURE_ICACHE_SNOOP	0x00002000
+#define PPC_FEATURE_ARCH_2_05		0x00001000
+#define PPC_FEATURE_PA6T		0x00000800
+#define PPC_FEATURE_HAS_DFP		0x00000400
+#define PPC_FEATURE_POWER6_EXT		0x00000200
+#define PPC_FEATURE_ARCH_2_06		0x00000100
+#define PPC_FEATURE_HAS_VSX		0x00000080
+
+#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \
+					0x00000040
+
+#define PPC_FEATURE_TRUE_LE		0x00000002
+#define PPC_FEATURE_PPC_LE		0x00000001
+
+#endif /* _UAPI__ASM_POWERPC_CPUTABLE_H */
diff --git a/arch/powerpc/include/uapi/asm/elf.h b/arch/powerpc/include/uapi/asm/elf.h
new file mode 100644
index 0000000..05b8d56
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/elf.h
@@ -0,0 +1,307 @@
+/*
+ * ELF register definitions..
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_ASM_POWERPC_ELF_H
+#define _UAPI_ASM_POWERPC_ELF_H
+
+
+#include <linux/types.h>
+
+#include <asm/ptrace.h>
+#include <asm/cputable.h>
+#include <asm/auxvec.h>
+
+/* PowerPC relocations defined by the ABIs */
+#define R_PPC_NONE		0
+#define R_PPC_ADDR32		1	/* 32bit absolute address */
+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
+#define R_PPC_ADDR16		3	/* 16bit absolute address */
+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
+#define R_PPC_ADDR14_BRTAKEN	8
+#define R_PPC_ADDR14_BRNTAKEN	9
+#define R_PPC_REL24		10	/* PC relative 26 bit */
+#define R_PPC_REL14		11	/* PC relative 16 bit */
+#define R_PPC_REL14_BRTAKEN	12
+#define R_PPC_REL14_BRNTAKEN	13
+#define R_PPC_GOT16		14
+#define R_PPC_GOT16_LO		15
+#define R_PPC_GOT16_HI		16
+#define R_PPC_GOT16_HA		17
+#define R_PPC_PLTREL24		18
+#define R_PPC_COPY		19
+#define R_PPC_GLOB_DAT		20
+#define R_PPC_JMP_SLOT		21
+#define R_PPC_RELATIVE		22
+#define R_PPC_LOCAL24PC		23
+#define R_PPC_UADDR32		24
+#define R_PPC_UADDR16		25
+#define R_PPC_REL32		26
+#define R_PPC_PLT32		27
+#define R_PPC_PLTREL32		28
+#define R_PPC_PLT16_LO		29
+#define R_PPC_PLT16_HI		30
+#define R_PPC_PLT16_HA		31
+#define R_PPC_SDAREL16		32
+#define R_PPC_SECTOFF		33
+#define R_PPC_SECTOFF_LO	34
+#define R_PPC_SECTOFF_HI	35
+#define R_PPC_SECTOFF_HA	36
+
+/* PowerPC relocations defined for the TLS access ABI.  */
+#define R_PPC_TLS		67 /* none	(sym+add)@tls */
+#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
+#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
+#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
+#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
+#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
+#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
+#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
+#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
+#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
+#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
+#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
+#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
+#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
+#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
+#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
+#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
+#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
+#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
+#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
+#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
+#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
+#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
+#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
+#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
+#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
+#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
+#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
+
+/* keep this the last entry. */
+#define R_PPC_NUM		95
+
+
+#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
+#define ELF_NFPREG	33	/* includes fpscr */
+
+typedef unsigned long elf_greg_t64;
+typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG];
+
+typedef unsigned int elf_greg_t32;
+typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG];
+typedef elf_gregset_t32 compat_elf_gregset_t;
+
+/*
+ * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps.
+ */
+#ifdef __powerpc64__
+# define ELF_NVRREG32	33	/* includes vscr & vrsave stuffed together */
+# define ELF_NVRREG	34	/* includes vscr & vrsave in split vectors */
+# define ELF_NVSRHALFREG 32	/* Half the vsx registers */
+# define ELF_GREG_TYPE	elf_greg_t64
+#else
+# define ELF_NEVRREG	34	/* includes acc (as 2) */
+# define ELF_NVRREG	33	/* includes vscr */
+# define ELF_GREG_TYPE	elf_greg_t32
+# define ELF_ARCH	EM_PPC
+# define ELF_CLASS	ELFCLASS32
+# define ELF_DATA	ELFDATA2MSB
+#endif /* __powerpc64__ */
+
+#ifndef ELF_ARCH
+# define ELF_ARCH	EM_PPC64
+# define ELF_CLASS	ELFCLASS64
+# define ELF_DATA	ELFDATA2MSB
+  typedef elf_greg_t64 elf_greg_t;
+  typedef elf_gregset_t64 elf_gregset_t;
+#else
+  /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */
+  typedef elf_greg_t32 elf_greg_t;
+  typedef elf_gregset_t32 elf_gregset_t;
+#endif /* ELF_ARCH */
+
+/* Floating point registers */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* Altivec registers */
+/*
+ * The entries with indexes 0-31 contain the corresponding vector registers. 
+ * The entry with index 32 contains the vscr as the last word (offset 12) 
+ * within the quadword.  This allows the vscr to be stored as either a 
+ * quadword (since it must be copied via a vector register to/from storage) 
+ * or as a word.  
+ *
+ * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first  
+ * word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32 
+ * ptrace interface.  This allows signal handling and ptrace to use the same 
+ * structures.  This also simplifies the implementation of a bi-arch 
+ * (combined (32- and 64-bit) gdb.
+ *
+ * Note that it's _not_ compatible with 32 bits ucontext which stuffs the
+ * vrsave along with vscr and so only uses 33 vectors for the register set
+ */
+typedef __vector128 elf_vrreg_t;
+typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
+#ifdef __powerpc64__
+typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32];
+typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG];
+#endif
+
+
+/*
+ * The requirements here are:
+ * - keep the final alignment of sp (sp & 0xf)
+ * - make sure the 32-bit value at the first 16 byte aligned position of
+ *   AUXV is greater than 16 for glibc compatibility.
+ *   AT_IGNOREPPC is used for that.
+ * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
+ *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
+ * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes
+ */
+#define ARCH_DLINFO							\
+do {									\
+	/* Handle glibc compatibility. */				\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	/* Cache size items */						\
+	NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);			\
+	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			\
+	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			\
+	VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base);	\
+} while (0)
+
+/* PowerPC64 relocations defined by the ABIs */
+#define R_PPC64_NONE    R_PPC_NONE
+#define R_PPC64_ADDR32  R_PPC_ADDR32  /* 32bit absolute address.  */
+#define R_PPC64_ADDR24  R_PPC_ADDR24  /* 26bit address, word aligned.  */
+#define R_PPC64_ADDR16  R_PPC_ADDR16  /* 16bit absolute address. */
+#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address.  */
+#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */
+#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits.  */
+#define R_PPC64_ADDR14 R_PPC_ADDR14   /* 16bit address, word aligned.  */
+#define R_PPC64_ADDR14_BRTAKEN  R_PPC_ADDR14_BRTAKEN
+#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
+#define R_PPC64_REL24   R_PPC_REL24 /* PC relative 26 bit, word aligned.  */
+#define R_PPC64_REL14   R_PPC_REL14 /* PC relative 16 bit. */
+#define R_PPC64_REL14_BRTAKEN   R_PPC_REL14_BRTAKEN
+#define R_PPC64_REL14_BRNTAKEN  R_PPC_REL14_BRNTAKEN
+#define R_PPC64_GOT16     R_PPC_GOT16
+#define R_PPC64_GOT16_LO  R_PPC_GOT16_LO
+#define R_PPC64_GOT16_HI  R_PPC_GOT16_HI
+#define R_PPC64_GOT16_HA  R_PPC_GOT16_HA
+
+#define R_PPC64_COPY      R_PPC_COPY
+#define R_PPC64_GLOB_DAT  R_PPC_GLOB_DAT
+#define R_PPC64_JMP_SLOT  R_PPC_JMP_SLOT
+#define R_PPC64_RELATIVE  R_PPC_RELATIVE
+
+#define R_PPC64_UADDR32   R_PPC_UADDR32
+#define R_PPC64_UADDR16   R_PPC_UADDR16
+#define R_PPC64_REL32     R_PPC_REL32
+#define R_PPC64_PLT32     R_PPC_PLT32
+#define R_PPC64_PLTREL32  R_PPC_PLTREL32
+#define R_PPC64_PLT16_LO  R_PPC_PLT16_LO
+#define R_PPC64_PLT16_HI  R_PPC_PLT16_HI
+#define R_PPC64_PLT16_HA  R_PPC_PLT16_HA
+
+#define R_PPC64_SECTOFF     R_PPC_SECTOFF
+#define R_PPC64_SECTOFF_LO  R_PPC_SECTOFF_LO
+#define R_PPC64_SECTOFF_HI  R_PPC_SECTOFF_HI
+#define R_PPC64_SECTOFF_HA  R_PPC_SECTOFF_HA
+#define R_PPC64_ADDR30          37  /* word30 (S + A - P) >> 2.  */
+#define R_PPC64_ADDR64          38  /* doubleword64 S + A.  */
+#define R_PPC64_ADDR16_HIGHER   39  /* half16 #higher(S + A).  */
+#define R_PPC64_ADDR16_HIGHERA  40  /* half16 #highera(S + A).  */
+#define R_PPC64_ADDR16_HIGHEST  41  /* half16 #highest(S + A).  */
+#define R_PPC64_ADDR16_HIGHESTA 42  /* half16 #highesta(S + A). */
+#define R_PPC64_UADDR64     43  /* doubleword64 S + A.  */
+#define R_PPC64_REL64       44  /* doubleword64 S + A - P.  */
+#define R_PPC64_PLT64       45  /* doubleword64 L + A.  */
+#define R_PPC64_PLTREL64    46  /* doubleword64 L + A - P.  */
+#define R_PPC64_TOC16       47  /* half16* S + A - .TOC.  */
+#define R_PPC64_TOC16_LO    48  /* half16 #lo(S + A - .TOC.).  */
+#define R_PPC64_TOC16_HI    49  /* half16 #hi(S + A - .TOC.).  */
+#define R_PPC64_TOC16_HA    50  /* half16 #ha(S + A - .TOC.).  */
+#define R_PPC64_TOC         51  /* doubleword64 .TOC. */
+#define R_PPC64_PLTGOT16    52  /* half16* M + A.  */
+#define R_PPC64_PLTGOT16_LO 53  /* half16 #lo(M + A).  */
+#define R_PPC64_PLTGOT16_HI 54  /* half16 #hi(M + A).  */
+#define R_PPC64_PLTGOT16_HA 55  /* half16 #ha(M + A).  */
+
+#define R_PPC64_ADDR16_DS      56 /* half16ds* (S + A) >> 2.  */
+#define R_PPC64_ADDR16_LO_DS   57 /* half16ds  #lo(S + A) >> 2.  */
+#define R_PPC64_GOT16_DS       58 /* half16ds* (G + A) >> 2.  */
+#define R_PPC64_GOT16_LO_DS    59 /* half16ds  #lo(G + A) >> 2.  */
+#define R_PPC64_PLT16_LO_DS    60 /* half16ds  #lo(L + A) >> 2.  */
+#define R_PPC64_SECTOFF_DS     61 /* half16ds* (R + A) >> 2.  */
+#define R_PPC64_SECTOFF_LO_DS  62 /* half16ds  #lo(R + A) >> 2.  */
+#define R_PPC64_TOC16_DS       63 /* half16ds* (S + A - .TOC.) >> 2.  */
+#define R_PPC64_TOC16_LO_DS    64 /* half16ds  #lo(S + A - .TOC.) >> 2.  */
+#define R_PPC64_PLTGOT16_DS    65 /* half16ds* (M + A) >> 2.  */
+#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds  #lo(M + A) >> 2.  */
+
+/* PowerPC64 relocations defined for the TLS access ABI.  */
+#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
+#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
+#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
+#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
+#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
+#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
+#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
+#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
+#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
+#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
+#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
+#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
+#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
+#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
+#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
+#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
+#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
+#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
+#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
+#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
+#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
+#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
+#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
+#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
+#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
+#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
+#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
+#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
+#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
+#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
+#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
+#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
+#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
+#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
+
+/* Keep this the last entry.  */
+#define R_PPC64_NUM		107
+
+/* There's actually a third entry here, but it's unused */
+struct ppc64_opd_entry
+{
+	unsigned long funcaddr;
+	unsigned long r2;
+};
+
+
+#endif /* _UAPI_ASM_POWERPC_ELF_H */
diff --git a/arch/powerpc/include/asm/errno.h b/arch/powerpc/include/uapi/asm/errno.h
similarity index 100%
rename from arch/powerpc/include/asm/errno.h
rename to arch/powerpc/include/uapi/asm/errno.h
diff --git a/arch/powerpc/include/asm/fcntl.h b/arch/powerpc/include/uapi/asm/fcntl.h
similarity index 100%
rename from arch/powerpc/include/asm/fcntl.h
rename to arch/powerpc/include/uapi/asm/fcntl.h
diff --git a/arch/powerpc/include/asm/ioctl.h b/arch/powerpc/include/uapi/asm/ioctl.h
similarity index 100%
rename from arch/powerpc/include/asm/ioctl.h
rename to arch/powerpc/include/uapi/asm/ioctl.h
diff --git a/arch/powerpc/include/asm/ioctls.h b/arch/powerpc/include/uapi/asm/ioctls.h
similarity index 100%
rename from arch/powerpc/include/asm/ioctls.h
rename to arch/powerpc/include/uapi/asm/ioctls.h
diff --git a/arch/powerpc/include/asm/ipcbuf.h b/arch/powerpc/include/uapi/asm/ipcbuf.h
similarity index 100%
rename from arch/powerpc/include/asm/ipcbuf.h
rename to arch/powerpc/include/uapi/asm/ipcbuf.h
diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
similarity index 100%
rename from arch/powerpc/include/asm/kvm.h
rename to arch/powerpc/include/uapi/asm/kvm.h
diff --git a/arch/powerpc/include/uapi/asm/kvm_para.h b/arch/powerpc/include/uapi/asm/kvm_para.h
new file mode 100644
index 0000000..5e04383
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/kvm_para.h
@@ -0,0 +1,90 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef _UAPI__POWERPC_KVM_PARA_H__
+#define _UAPI__POWERPC_KVM_PARA_H__
+
+#include <linux/types.h>
+
+/*
+ * Additions to this struct must only occur at the end, and should be
+ * accompanied by a KVM_MAGIC_FEAT flag to advertise that they are present
+ * (albeit not necessarily relevant to the current target hardware platform).
+ *
+ * Struct fields are always 32 or 64 bit aligned, depending on them being 32
+ * or 64 bit wide respectively.
+ *
+ * See Documentation/virtual/kvm/ppc-pv.txt
+ */
+struct kvm_vcpu_arch_shared {
+	__u64 scratch1;
+	__u64 scratch2;
+	__u64 scratch3;
+	__u64 critical;		/* Guest may not get interrupts if == r1 */
+	__u64 sprg0;
+	__u64 sprg1;
+	__u64 sprg2;
+	__u64 sprg3;
+	__u64 srr0;
+	__u64 srr1;
+	__u64 dar;		/* dear on BookE */
+	__u64 msr;
+	__u32 dsisr;
+	__u32 int_pending;	/* Tells the guest if we have an interrupt */
+	__u32 sr[16];
+	__u32 mas0;
+	__u32 mas1;
+	__u64 mas7_3;
+	__u64 mas2;
+	__u32 mas4;
+	__u32 mas6;
+	__u32 esr;
+	__u32 pir;
+
+	/*
+	 * SPRG4-7 are user-readable, so we can only keep these consistent
+	 * between the shared area and the real registers when there's an
+	 * intervening exit to KVM.  This also applies to SPRG3 on some
+	 * chips.
+	 *
+	 * This suffices for access by guest userspace, since in PR-mode
+	 * KVM, an exit must occur when changing the guest's MSR[PR].
+	 * If the guest kernel writes to SPRG3-7 via the shared area, it
+	 * must also use the shared area for reading while in kernel space.
+	 */
+	__u64 sprg4;
+	__u64 sprg5;
+	__u64 sprg6;
+	__u64 sprg7;
+};
+
+#define KVM_SC_MAGIC_R0		0x4b564d21 /* "KVM!" */
+#define HC_VENDOR_KVM		(42 << 16)
+#define HC_EV_SUCCESS		0
+#define HC_EV_UNIMPLEMENTED	12
+
+#define KVM_FEATURE_MAGIC_PAGE	1
+
+#define KVM_MAGIC_FEAT_SR		(1 << 0)
+
+/* MASn, ESR, PIR, and high SPRGs */
+#define KVM_MAGIC_FEAT_MAS0_TO_SPRG7	(1 << 1)
+
+
+#endif /* _UAPI__POWERPC_KVM_PARA_H__ */
diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/uapi/asm/linkage.h
similarity index 100%
rename from arch/powerpc/include/asm/linkage.h
rename to arch/powerpc/include/uapi/asm/linkage.h
diff --git a/arch/powerpc/include/uapi/asm/mman.h b/arch/powerpc/include/uapi/asm/mman.h
new file mode 100644
index 0000000..6ea26df
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/mman.h
@@ -0,0 +1,31 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_ASM_POWERPC_MMAN_H
+#define _UAPI_ASM_POWERPC_MMAN_H
+
+#include <asm-generic/mman-common.h>
+
+
+#define PROT_SAO	0x10		/* Strong Access Ordering */
+
+#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
+#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
+#define MAP_LOCKED	0x80
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+
+#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
+#define MCL_FUTURE      0x4000          /* lock all additions to address space */
+
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+#define MAP_HUGETLB	0x40000		/* create a huge page mapping */
+
+#endif /* _UAPI_ASM_POWERPC_MMAN_H */
diff --git a/arch/powerpc/include/asm/msgbuf.h b/arch/powerpc/include/uapi/asm/msgbuf.h
similarity index 100%
rename from arch/powerpc/include/asm/msgbuf.h
rename to arch/powerpc/include/uapi/asm/msgbuf.h
diff --git a/arch/powerpc/include/uapi/asm/nvram.h b/arch/powerpc/include/uapi/asm/nvram.h
new file mode 100644
index 0000000..608bdc8
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/nvram.h
@@ -0,0 +1,62 @@
+/*
+ * NVRAM definitions and access functions.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_ASM_POWERPC_NVRAM_H
+#define _UAPI_ASM_POWERPC_NVRAM_H
+
+/* Signatures for nvram partitions */
+#define NVRAM_SIG_SP	0x02	/* support processor */
+#define NVRAM_SIG_OF	0x50	/* open firmware config */
+#define NVRAM_SIG_FW	0x51	/* general firmware */
+#define NVRAM_SIG_HW	0x52	/* hardware (VPD) */
+#define NVRAM_SIG_FLIP	0x5a	/* Apple flip/flop header */
+#define NVRAM_SIG_APPL	0x5f	/* Apple "system" (???) */
+#define NVRAM_SIG_SYS	0x70	/* system env vars */
+#define NVRAM_SIG_CFG	0x71	/* config data */
+#define NVRAM_SIG_ELOG	0x72	/* error log */
+#define NVRAM_SIG_VEND	0x7e	/* vendor defined */
+#define NVRAM_SIG_FREE	0x7f	/* Free space */
+#define NVRAM_SIG_OS	0xa0	/* OS defined */
+#define NVRAM_SIG_PANIC	0xa1	/* Apple OSX "panic" */
+
+
+/* PowerMac specific nvram stuffs */
+
+enum {
+	pmac_nvram_OF,		/* Open Firmware partition */
+	pmac_nvram_XPRAM,	/* MacOS XPRAM partition */
+	pmac_nvram_NR		/* MacOS Name Registry partition */
+};
+
+
+/* Some offsets in XPRAM */
+#define PMAC_XPRAM_MACHINE_LOC	0xe4
+#define PMAC_XPRAM_SOUND_VOLUME	0x08
+
+/* Machine location structure in PowerMac XPRAM */
+struct pmac_machine_location {
+	unsigned int	latitude;	/* 2+30 bit Fractional number */
+	unsigned int	longitude;	/* 2+30 bit Fractional number */
+	unsigned int	delta;		/* mix of GMT delta and DLS */
+};
+
+/*
+ * /dev/nvram ioctls
+ *
+ * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is
+ * definitely obsolete. Do not use it if you can avoid it
+ */
+
+#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \
+				_IOWR('p', 0x40, int)
+
+#define IOC_NVRAM_GET_OFFSET	_IOWR('p', 0x42, int)	/* Get NVRAM partition offset */
+#define IOC_NVRAM_SYNC		_IO('p', 0x43)		/* Sync NVRAM image */
+
+#endif /* _UAPI_ASM_POWERPC_NVRAM_H */
diff --git a/arch/powerpc/include/asm/param.h b/arch/powerpc/include/uapi/asm/param.h
similarity index 100%
rename from arch/powerpc/include/asm/param.h
rename to arch/powerpc/include/uapi/asm/param.h
diff --git a/arch/powerpc/include/asm/poll.h b/arch/powerpc/include/uapi/asm/poll.h
similarity index 100%
rename from arch/powerpc/include/asm/poll.h
rename to arch/powerpc/include/uapi/asm/poll.h
diff --git a/arch/powerpc/include/asm/posix_types.h b/arch/powerpc/include/uapi/asm/posix_types.h
similarity index 100%
rename from arch/powerpc/include/asm/posix_types.h
rename to arch/powerpc/include/uapi/asm/posix_types.h
diff --git a/arch/powerpc/include/asm/ps3fb.h b/arch/powerpc/include/uapi/asm/ps3fb.h
similarity index 100%
rename from arch/powerpc/include/asm/ps3fb.h
rename to arch/powerpc/include/uapi/asm/ps3fb.h
diff --git a/arch/powerpc/include/uapi/asm/ptrace.h b/arch/powerpc/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..ee67a2b
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/ptrace.h
@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ *
+ * this should only contain volatile regs
+ * since we can keep non-volatile in the thread_struct
+ * should set this up when only volatiles are saved
+ * by intr code.
+ *
+ * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
+ * that the overall structure is a multiple of 16 bytes in length.
+ *
+ * Note that the offsets of the fields in this struct correspond with
+ * the PT_* values below.  This simplifies arch/powerpc/kernel/ptrace.c.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_ASM_POWERPC_PTRACE_H
+#define _UAPI_ASM_POWERPC_PTRACE_H
+
+
+#include <linux/types.h>
+
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+	unsigned long gpr[32];
+	unsigned long nip;
+	unsigned long msr;
+	unsigned long orig_gpr3;	/* Used for restarting system calls */
+	unsigned long ctr;
+	unsigned long link;
+	unsigned long xer;
+	unsigned long ccr;
+#ifdef __powerpc64__
+	unsigned long softe;		/* Soft enabled/disabled */
+#else
+	unsigned long mq;		/* 601 only (not used at present) */
+					/* Used on APUS to hold IPL value. */
+#endif
+	unsigned long trap;		/* Reason for being here */
+	/* N.B. for critical exceptions on 4xx, the dar and dsisr
+	   fields are overloaded to hold srr0 and srr1. */
+	unsigned long dar;		/* Fault registers */
+	unsigned long dsisr;		/* on 4xx/Book-E used for ESR */
+	unsigned long result;		/* Result of a system call */
+};
+
+#endif /* __ASSEMBLY__ */
+
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ * These can't be changed without breaking binary compatibility
+ * with MkLinux, etc.
+ */
+#define PT_R0	0
+#define PT_R1	1
+#define PT_R2	2
+#define PT_R3	3
+#define PT_R4	4
+#define PT_R5	5
+#define PT_R6	6
+#define PT_R7	7
+#define PT_R8	8
+#define PT_R9	9
+#define PT_R10	10
+#define PT_R11	11
+#define PT_R12	12
+#define PT_R13	13
+#define PT_R14	14
+#define PT_R15	15
+#define PT_R16	16
+#define PT_R17	17
+#define PT_R18	18
+#define PT_R19	19
+#define PT_R20	20
+#define PT_R21	21
+#define PT_R22	22
+#define PT_R23	23
+#define PT_R24	24
+#define PT_R25	25
+#define PT_R26	26
+#define PT_R27	27
+#define PT_R28	28
+#define PT_R29	29
+#define PT_R30	30
+#define PT_R31	31
+
+#define PT_NIP	32
+#define PT_MSR	33
+#define PT_ORIG_R3 34
+#define PT_CTR	35
+#define PT_LNK	36
+#define PT_XER	37
+#define PT_CCR	38
+#ifndef __powerpc64__
+#define PT_MQ	39
+#else
+#define PT_SOFTE 39
+#endif
+#define PT_TRAP	40
+#define PT_DAR	41
+#define PT_DSISR 42
+#define PT_RESULT 43
+#define PT_REGS_COUNT 44
+
+#define PT_FPR0	48	/* each FP reg occupies 2 slots in this space */
+
+#ifndef __powerpc64__
+
+#define PT_FPR31 (PT_FPR0 + 2*31)
+#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
+
+#else /* __powerpc64__ */
+
+#define PT_FPSCR (PT_FPR0 + 32)	/* each FP reg occupies 1 slot in 64-bit space */
+
+
+#define PT_VR0 82	/* each Vector reg occupies 2 slots in 64-bit */
+#define PT_VSCR (PT_VR0 + 32*2 + 1)
+#define PT_VRSAVE (PT_VR0 + 33*2)
+
+
+/*
+ * Only store first 32 VSRs here. The second 32 VSRs in VR0-31
+ */
+#define PT_VSR0 150	/* each VSR reg occupies 2 slots in 64-bit */
+#define PT_VSR31 (PT_VSR0 + 2*31)
+#endif /* __powerpc64__ */
+
+/*
+ * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
+ * The transfer totals 34 quadword.  Quadwords 0-31 contain the
+ * corresponding vector registers.  Quadword 32 contains the vscr as the
+ * last word (offset 12) within that quadword.  Quadword 33 contains the
+ * vrsave as the first word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32
+ * ptrace interface.  This allows signal handling and ptrace to use the same
+ * structures.  This also simplifies the implementation of a bi-arch
+ * (combined (32- and 64-bit) gdb.
+ */
+#define PTRACE_GETVRREGS	18
+#define PTRACE_SETVRREGS	19
+
+/* Get/set all the upper 32-bits of the SPE registers, accumulator, and
+ * spefscr, in one go */
+#define PTRACE_GETEVRREGS	20
+#define PTRACE_SETEVRREGS	21
+
+/* Get the first 32 128bit VSX registers */
+#define PTRACE_GETVSRREGS	27
+#define PTRACE_SETVSRREGS	28
+
+/*
+ * Get or set a debug register. The first 16 are DABR registers and the
+ * second 16 are IABR registers.
+ */
+#define PTRACE_GET_DEBUGREG	25
+#define PTRACE_SET_DEBUGREG	26
+
+/* (new) PTRACE requests using the same numbers as x86 and the same
+ * argument ordering. Additionally, they support more registers too
+ */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_GETREGS64	  22
+#define PTRACE_SETREGS64	  23
+
+/* Calls to trace a 64bit program from a 32bit program */
+#define PPC_PTRACE_PEEKTEXT_3264 0x95
+#define PPC_PTRACE_PEEKDATA_3264 0x94
+#define PPC_PTRACE_POKETEXT_3264 0x93
+#define PPC_PTRACE_POKEDATA_3264 0x92
+#define PPC_PTRACE_PEEKUSR_3264  0x91
+#define PPC_PTRACE_POKEUSR_3264  0x90
+
+#define PTRACE_SINGLEBLOCK	0x100	/* resume execution until next branch */
+
+#define PPC_PTRACE_GETHWDBGINFO	0x89
+#define PPC_PTRACE_SETHWDEBUG	0x88
+#define PPC_PTRACE_DELHWDEBUG	0x87
+
+#ifndef __ASSEMBLY__
+
+struct ppc_debug_info {
+	__u32 version;			/* Only version 1 exists to date */
+	__u32 num_instruction_bps;
+	__u32 num_data_bps;
+	__u32 num_condition_regs;
+	__u32 data_bp_alignment;
+	__u32 sizeof_condition;		/* size of the DVC register */
+	__u64 features;
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * features will have bits indication whether there is support for:
+ */
+#define PPC_DEBUG_FEATURE_INSN_BP_RANGE		0x0000000000000001
+#define PPC_DEBUG_FEATURE_INSN_BP_MASK		0x0000000000000002
+#define PPC_DEBUG_FEATURE_DATA_BP_RANGE		0x0000000000000004
+#define PPC_DEBUG_FEATURE_DATA_BP_MASK		0x0000000000000008
+
+#ifndef __ASSEMBLY__
+
+struct ppc_hw_breakpoint {
+	__u32 version;		/* currently, version must be 1 */
+	__u32 trigger_type;	/* only some combinations allowed */
+	__u32 addr_mode;	/* address match mode */
+	__u32 condition_mode;	/* break/watchpoint condition flags */
+	__u64 addr;		/* break/watchpoint address */
+	__u64 addr2;		/* range end or mask */
+	__u64 condition_value;	/* contents of the DVC register */
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Trigger Type
+ */
+#define PPC_BREAKPOINT_TRIGGER_EXECUTE	0x00000001
+#define PPC_BREAKPOINT_TRIGGER_READ	0x00000002
+#define PPC_BREAKPOINT_TRIGGER_WRITE	0x00000004
+#define PPC_BREAKPOINT_TRIGGER_RW	\
+	(PPC_BREAKPOINT_TRIGGER_READ | PPC_BREAKPOINT_TRIGGER_WRITE)
+
+/*
+ * Address Mode
+ */
+#define PPC_BREAKPOINT_MODE_EXACT		0x00000000
+#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE	0x00000001
+#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE	0x00000002
+#define PPC_BREAKPOINT_MODE_MASK		0x00000003
+
+/*
+ * Condition Mode
+ */
+#define PPC_BREAKPOINT_CONDITION_MODE	0x00000003
+#define PPC_BREAKPOINT_CONDITION_NONE	0x00000000
+#define PPC_BREAKPOINT_CONDITION_AND	0x00000001
+#define PPC_BREAKPOINT_CONDITION_EXACT	PPC_BREAKPOINT_CONDITION_AND
+#define PPC_BREAKPOINT_CONDITION_OR	0x00000002
+#define PPC_BREAKPOINT_CONDITION_AND_OR	0x00000003
+#define PPC_BREAKPOINT_CONDITION_BE_ALL	0x00ff0000
+#define PPC_BREAKPOINT_CONDITION_BE_SHIFT	16
+#define PPC_BREAKPOINT_CONDITION_BE(n)	\
+	(1<<((n)+PPC_BREAKPOINT_CONDITION_BE_SHIFT))
+
+#endif /* _UAPI_ASM_POWERPC_PTRACE_H */
diff --git a/arch/powerpc/include/asm/resource.h b/arch/powerpc/include/uapi/asm/resource.h
similarity index 100%
rename from arch/powerpc/include/asm/resource.h
rename to arch/powerpc/include/uapi/asm/resource.h
diff --git a/arch/powerpc/include/asm/seccomp.h b/arch/powerpc/include/uapi/asm/seccomp.h
similarity index 100%
rename from arch/powerpc/include/asm/seccomp.h
rename to arch/powerpc/include/uapi/asm/seccomp.h
diff --git a/arch/powerpc/include/asm/sembuf.h b/arch/powerpc/include/uapi/asm/sembuf.h
similarity index 100%
rename from arch/powerpc/include/asm/sembuf.h
rename to arch/powerpc/include/uapi/asm/sembuf.h
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/uapi/asm/setup.h
similarity index 100%
rename from arch/powerpc/include/asm/setup.h
rename to arch/powerpc/include/uapi/asm/setup.h
diff --git a/arch/powerpc/include/asm/shmbuf.h b/arch/powerpc/include/uapi/asm/shmbuf.h
similarity index 100%
rename from arch/powerpc/include/asm/shmbuf.h
rename to arch/powerpc/include/uapi/asm/shmbuf.h
diff --git a/arch/powerpc/include/asm/sigcontext.h b/arch/powerpc/include/uapi/asm/sigcontext.h
similarity index 100%
rename from arch/powerpc/include/asm/sigcontext.h
rename to arch/powerpc/include/uapi/asm/sigcontext.h
diff --git a/arch/powerpc/include/asm/siginfo.h b/arch/powerpc/include/uapi/asm/siginfo.h
similarity index 100%
rename from arch/powerpc/include/asm/siginfo.h
rename to arch/powerpc/include/uapi/asm/siginfo.h
diff --git a/arch/powerpc/include/uapi/asm/signal.h b/arch/powerpc/include/uapi/asm/signal.h
new file mode 100644
index 0000000..48fa8d3
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/signal.h
@@ -0,0 +1,145 @@
+#ifndef _UAPI_ASM_POWERPC_SIGNAL_H
+#define _UAPI_ASM_POWERPC_SIGNAL_H
+
+#include <linux/types.h>
+
+#define _NSIG		64
+#ifdef __powerpc64__
+#define _NSIG_BPW	64
+#else
+#define _NSIG_BPW	32
+#endif
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001U
+#define SA_NOCLDWAIT	0x00000002U
+#define SA_SIGINFO	0x00000004U
+#define SA_ONSTACK	0x08000000U
+#define SA_RESTART	0x10000000U
+#define SA_NODEFER	0x40000000U
+#define SA_RESETHAND	0x80000000U
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000U
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal-defs.h>
+
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+
+#ifndef __powerpc64__
+/*
+ * These are parameters to dbg_sigreturn syscall.  They enable or
+ * disable certain debugging things that can be done from signal
+ * handlers.  The dbg_sigreturn syscall *must* be called from a
+ * SA_SIGINFO signal so the ucontext can be passed to it.  It takes an
+ * array of struct sig_dbg_op, which has the debug operations to
+ * perform before returning from the signal.
+ */
+struct sig_dbg_op {
+	int dbg_type;
+	unsigned long dbg_value;
+};
+
+/* Enable or disable single-stepping.  The value sets the state. */
+#define SIG_DBG_SINGLE_STEPPING		1
+
+/* Enable or disable branch tracing.  The value sets the state. */
+#define SIG_DBG_BRANCH_TRACING		2
+#endif /* ! __powerpc64__ */
+
+#endif /* _UAPI_ASM_POWERPC_SIGNAL_H */
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/uapi/asm/socket.h
similarity index 100%
rename from arch/powerpc/include/asm/socket.h
rename to arch/powerpc/include/uapi/asm/socket.h
diff --git a/arch/powerpc/include/asm/sockios.h b/arch/powerpc/include/uapi/asm/sockios.h
similarity index 100%
rename from arch/powerpc/include/asm/sockios.h
rename to arch/powerpc/include/uapi/asm/sockios.h
diff --git a/arch/powerpc/include/uapi/asm/spu_info.h b/arch/powerpc/include/uapi/asm/spu_info.h
new file mode 100644
index 0000000..ed071bf
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/spu_info.h
@@ -0,0 +1,53 @@
+/*
+ * SPU info structures
+ *
+ * (C) Copyright 2006 IBM Corp.
+ *
+ * Author: Dwayne Grant McConnell <decimal@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _UAPI_SPU_INFO_H
+#define _UAPI_SPU_INFO_H
+
+#include <linux/types.h>
+
+#ifndef __KERNEL__
+struct mfc_cq_sr {
+	__u64 mfc_cq_data0_RW;
+	__u64 mfc_cq_data1_RW;
+	__u64 mfc_cq_data2_RW;
+	__u64 mfc_cq_data3_RW;
+};
+#endif /* __KERNEL__ */
+
+struct spu_dma_info {
+	__u64 dma_info_type;
+	__u64 dma_info_mask;
+	__u64 dma_info_status;
+	__u64 dma_info_stall_and_notify;
+	__u64 dma_info_atomic_command_status;
+	struct mfc_cq_sr dma_info_command_data[16];
+};
+
+struct spu_proxydma_info {
+	__u64 proxydma_info_type;
+	__u64 proxydma_info_mask;
+	__u64 proxydma_info_status;
+	struct mfc_cq_sr proxydma_info_command_data[8];
+};
+
+#endif /* _UAPI_SPU_INFO_H */
diff --git a/arch/powerpc/include/asm/stat.h b/arch/powerpc/include/uapi/asm/stat.h
similarity index 100%
rename from arch/powerpc/include/asm/stat.h
rename to arch/powerpc/include/uapi/asm/stat.h
diff --git a/arch/powerpc/include/asm/statfs.h b/arch/powerpc/include/uapi/asm/statfs.h
similarity index 100%
rename from arch/powerpc/include/asm/statfs.h
rename to arch/powerpc/include/uapi/asm/statfs.h
diff --git a/arch/powerpc/include/uapi/asm/swab.h b/arch/powerpc/include/uapi/asm/swab.h
new file mode 100644
index 0000000..b6c368a
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/swab.h
@@ -0,0 +1,23 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_ASM_POWERPC_SWAB_H
+#define _UAPI_ASM_POWERPC_SWAB_H
+
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+
+#ifndef __powerpc64__
+#define __SWAB_64_THRU_32__
+#endif /* __powerpc64__ */
+
+
+#endif /* __GNUC__ */
+
+#endif /* _UAPI_ASM_POWERPC_SWAB_H */
diff --git a/arch/powerpc/include/asm/termbits.h b/arch/powerpc/include/uapi/asm/termbits.h
similarity index 100%
rename from arch/powerpc/include/asm/termbits.h
rename to arch/powerpc/include/uapi/asm/termbits.h
diff --git a/arch/powerpc/include/uapi/asm/termios.h b/arch/powerpc/include/uapi/asm/termios.h
new file mode 100644
index 0000000..6cca5cd
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/termios.h
@@ -0,0 +1,76 @@
+/*
+ * Liberally adapted from alpha/termios.h.  In particular, the c_cc[]
+ * fields have been reordered so that termio & termios share the
+ * common subset in the same order (for brain dead programs that don't
+ * know or care about the differences).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_ASM_POWERPC_TERMIOS_H
+#define _UAPI_ASM_POWERPC_TERMIOS_H
+
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 10
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* c_cc characters */
+#define _VINTR	0
+#define _VQUIT	1
+#define _VERASE	2
+#define _VKILL	3
+#define _VEOF	4
+#define _VMIN	5
+#define _VEOL	6
+#define _VTIME	7
+#define _VEOL2	8
+#define _VSWTC	9
+
+
+
+#endif /* _UAPI_ASM_POWERPC_TERMIOS_H */
diff --git a/arch/powerpc/include/uapi/asm/types.h b/arch/powerpc/include/uapi/asm/types.h
new file mode 100644
index 0000000..4b8ab99
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/types.h
@@ -0,0 +1,40 @@
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_ASM_POWERPC_TYPES_H
+#define _UAPI_ASM_POWERPC_TYPES_H
+
+/*
+ * This is here because we used to use l64 for 64bit powerpc
+ * and we don't want to impact user mode with our change to ll64
+ * in the kernel.
+ *
+ * However, some user programs are fine with this.  They can
+ * flag __SANE_USERSPACE_TYPES__ to get int-ll64.h here.
+ */
+#if !defined(__SANE_USERSPACE_TYPES__) && defined(__powerpc64__) && !defined(__KERNEL__)
+# include <asm-generic/int-l64.h>
+#else
+# include <asm-generic/int-ll64.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+
+typedef struct {
+	__u32 u[4];
+} __attribute__((aligned(16))) __vector128;
+
+#endif /* __ASSEMBLY__ */
+
+
+#endif /* _UAPI_ASM_POWERPC_TYPES_H */
diff --git a/arch/powerpc/include/asm/ucontext.h b/arch/powerpc/include/uapi/asm/ucontext.h
similarity index 100%
rename from arch/powerpc/include/asm/ucontext.h
rename to arch/powerpc/include/uapi/asm/ucontext.h
diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..380b5d3
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/unistd.h
@@ -0,0 +1,380 @@
+/*
+ * This file contains the system call numbers.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_ASM_POWERPC_UNISTD_H_
+#define _UAPI_ASM_POWERPC_UNISTD_H_
+
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_query_module	166
+#define __NR_poll		167
+#define __NR_nfsservctl		168
+#define __NR_setresgid		169
+#define __NR_getresgid		170
+#define __NR_prctl		171
+#define __NR_rt_sigreturn	172
+#define __NR_rt_sigaction	173
+#define __NR_rt_sigprocmask	174
+#define __NR_rt_sigpending	175
+#define __NR_rt_sigtimedwait	176
+#define __NR_rt_sigqueueinfo	177
+#define __NR_rt_sigsuspend	178
+#define __NR_pread64		179
+#define __NR_pwrite64		180
+#define __NR_chown		181
+#define __NR_getcwd		182
+#define __NR_capget		183
+#define __NR_capset		184
+#define __NR_sigaltstack	185
+#define __NR_sendfile		186
+#define __NR_getpmsg		187	/* some people actually want streams */
+#define __NR_putpmsg		188	/* some people actually want streams */
+#define __NR_vfork		189
+#define __NR_ugetrlimit		190	/* SuS compliant getrlimit */
+#define __NR_readahead		191
+#ifndef __powerpc64__			/* these are 32-bit only */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#endif
+#define __NR_pciconfig_read	198
+#define __NR_pciconfig_write	199
+#define __NR_pciconfig_iobase	200
+#define __NR_multiplexer	201
+#define __NR_getdents64		202
+#define __NR_pivot_root		203
+#ifndef __powerpc64__
+#define __NR_fcntl64		204
+#endif
+#define __NR_madvise		205
+#define __NR_mincore		206
+#define __NR_gettid		207
+#define __NR_tkill		208
+#define __NR_setxattr		209
+#define __NR_lsetxattr		210
+#define __NR_fsetxattr		211
+#define __NR_getxattr		212
+#define __NR_lgetxattr		213
+#define __NR_fgetxattr		214
+#define __NR_listxattr		215
+#define __NR_llistxattr		216
+#define __NR_flistxattr		217
+#define __NR_removexattr	218
+#define __NR_lremovexattr	219
+#define __NR_fremovexattr	220
+#define __NR_futex		221
+#define __NR_sched_setaffinity	222
+#define __NR_sched_getaffinity	223
+/* 224 currently unused */
+#define __NR_tuxcall		225
+#ifndef __powerpc64__
+#define __NR_sendfile64		226
+#endif
+#define __NR_io_setup		227
+#define __NR_io_destroy		228
+#define __NR_io_getevents	229
+#define __NR_io_submit		230
+#define __NR_io_cancel		231
+#define __NR_set_tid_address	232
+#define __NR_fadvise64		233
+#define __NR_exit_group		234
+#define __NR_lookup_dcookie	235
+#define __NR_epoll_create	236
+#define __NR_epoll_ctl		237
+#define __NR_epoll_wait		238
+#define __NR_remap_file_pages	239
+#define __NR_timer_create	240
+#define __NR_timer_settime	241
+#define __NR_timer_gettime	242
+#define __NR_timer_getoverrun	243
+#define __NR_timer_delete	244
+#define __NR_clock_settime	245
+#define __NR_clock_gettime	246
+#define __NR_clock_getres	247
+#define __NR_clock_nanosleep	248
+#define __NR_swapcontext	249
+#define __NR_tgkill		250
+#define __NR_utimes		251
+#define __NR_statfs64		252
+#define __NR_fstatfs64		253
+#ifndef __powerpc64__
+#define __NR_fadvise64_64	254
+#endif
+#define __NR_rtas		255
+#define __NR_sys_debug_setcontext 256
+/* Number 257 is reserved for vserver */
+#define __NR_migrate_pages	258
+#define __NR_mbind		259
+#define __NR_get_mempolicy	260
+#define __NR_set_mempolicy	261
+#define __NR_mq_open		262
+#define __NR_mq_unlink		263
+#define __NR_mq_timedsend	264
+#define __NR_mq_timedreceive	265
+#define __NR_mq_notify		266
+#define __NR_mq_getsetattr	267
+#define __NR_kexec_load		268
+#define __NR_add_key		269
+#define __NR_request_key	270
+#define __NR_keyctl		271
+#define __NR_waitid		272
+#define __NR_ioprio_set		273
+#define __NR_ioprio_get		274
+#define __NR_inotify_init	275
+#define __NR_inotify_add_watch	276
+#define __NR_inotify_rm_watch	277
+#define __NR_spu_run		278
+#define __NR_spu_create		279
+#define __NR_pselect6		280
+#define __NR_ppoll		281
+#define __NR_unshare		282
+#define __NR_splice		283
+#define __NR_tee		284
+#define __NR_vmsplice		285
+#define __NR_openat		286
+#define __NR_mkdirat		287
+#define __NR_mknodat		288
+#define __NR_fchownat		289
+#define __NR_futimesat		290
+#ifdef __powerpc64__
+#define __NR_newfstatat		291
+#else
+#define __NR_fstatat64		291
+#endif
+#define __NR_unlinkat		292
+#define __NR_renameat		293
+#define __NR_linkat		294
+#define __NR_symlinkat		295
+#define __NR_readlinkat		296
+#define __NR_fchmodat		297
+#define __NR_faccessat		298
+#define __NR_get_robust_list	299
+#define __NR_set_robust_list	300
+#define __NR_move_pages		301
+#define __NR_getcpu		302
+#define __NR_epoll_pwait	303
+#define __NR_utimensat		304
+#define __NR_signalfd		305
+#define __NR_timerfd_create	306
+#define __NR_eventfd		307
+#define __NR_sync_file_range2	308
+#define __NR_fallocate		309
+#define __NR_subpage_prot	310
+#define __NR_timerfd_settime	311
+#define __NR_timerfd_gettime	312
+#define __NR_signalfd4		313
+#define __NR_eventfd2		314
+#define __NR_epoll_create1	315
+#define __NR_dup3		316
+#define __NR_pipe2		317
+#define __NR_inotify_init1	318
+#define __NR_perf_event_open	319
+#define __NR_preadv		320
+#define __NR_pwritev		321
+#define __NR_rt_tgsigqueueinfo	322
+#define __NR_fanotify_init	323
+#define __NR_fanotify_mark	324
+#define __NR_prlimit64		325
+#define __NR_socket		326
+#define __NR_bind		327
+#define __NR_connect		328
+#define __NR_listen		329
+#define __NR_accept		330
+#define __NR_getsockname	331
+#define __NR_getpeername	332
+#define __NR_socketpair		333
+#define __NR_send		334
+#define __NR_sendto		335
+#define __NR_recv		336
+#define __NR_recvfrom		337
+#define __NR_shutdown		338
+#define __NR_setsockopt		339
+#define __NR_getsockopt		340
+#define __NR_sendmsg		341
+#define __NR_recvmsg		342
+#define __NR_recvmmsg		343
+#define __NR_accept4		344
+#define __NR_name_to_handle_at	345
+#define __NR_open_by_handle_at	346
+#define __NR_clock_adjtime	347
+#define __NR_syncfs		348
+#define __NR_sendmmsg		349
+#define __NR_setns		350
+#define __NR_process_vm_readv	351
+#define __NR_process_vm_writev	352
+
+
+#endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index c9986fd..ce4cb77 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -73,7 +73,7 @@
 /* powerpc clocksource/clockevent code */
 
 #include <linux/clockchips.h>
-#include <linux/clocksource.h>
+#include <linux/timekeeper_internal.h>
 
 static cycle_t rtc_read(struct clocksource *);
 static struct clocksource clocksource_rtc = {
@@ -727,7 +727,7 @@
 	return (cycle_t)get_tb();
 }
 
-void update_vsyscall(struct timespec *wall_time, struct timespec *wtm,
+void update_vsyscall_old(struct timespec *wall_time, struct timespec *wtm,
 			struct clocksource *clock, u32 mult)
 {
 	u64 new_tb_to_xs, new_stamp_xsec;
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index 51faaac..185bedd 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -23,6 +23,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
+#include <linux/kthread.h>
 #include <asm/eeh_event.h>
 #include <asm/ppc-pci.h>
 
@@ -59,8 +60,6 @@
 	struct eeh_event *event;
 	struct eeh_pe *pe;
 
-	set_task_comm(current, "eehd");
-
 	spin_lock_irqsave(&eeh_eventlist_lock, flags);
 	event = NULL;
 
@@ -108,7 +107,7 @@
  */
 static void eeh_thread_launcher(struct work_struct *dummy)
 {
-	if (kernel_thread(eeh_event_handler, NULL, CLONE_KERNEL) < 0)
+	if (IS_ERR(kthread_run(eeh_event_handler, NULL, "eehd")))
 		printk(KERN_ERR "Failed to start EEH daemon\n");
 }
 
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 99d2d79..e5dac12 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -131,7 +131,7 @@
 	select HAVE_UID16 if 32BIT
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_TIME_VSYSCALL
+	select GENERIC_TIME_VSYSCALL_OLD
 	select GENERIC_CLOCKEVENTS
 	select KTIME_SCALAR if 32BIT
 	select HAVE_ARCH_SECCOMP_FILTER
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 2db1011..7fcd690 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -34,7 +34,7 @@
 #include <linux/profile.h>
 #include <linux/timex.h>
 #include <linux/notifier.h>
-#include <linux/clocksource.h>
+#include <linux/timekeeper_internal.h>
 #include <linux/clockchips.h>
 #include <linux/gfp.h>
 #include <linux/kprobes.h>
@@ -219,7 +219,7 @@
 	return &clocksource_tod;
 }
 
-void update_vsyscall(struct timespec *wall_time, struct timespec *wtm,
+void update_vsyscall_old(struct timespec *wall_time, struct timespec *wtm,
 			struct clocksource *clock, u32 mult)
 {
 	if (clock != &clocksource_tod)
diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c
index 21e8679..d45cf00 100644
--- a/arch/score/kernel/sys_score.c
+++ b/arch/score/kernel/sys_score.c
@@ -92,14 +92,14 @@
 score_execve(struct pt_regs *regs)
 {
 	int error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname((char __user*)regs->regs[4]);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		return error;
 
-	error = do_execve(filename,
+	error = do_execve(filename->name,
 			  (const char __user *const __user *)regs->regs[5],
 			  (const char __user *const __user *)regs->regs[6],
 			  regs);
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 59521e8..ba7345f 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -298,14 +298,14 @@
 {
 	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);
 	int error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname(ufilename);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
 
-	error = do_execve(filename, uargv, uenvp, regs);
+	error = do_execve(filename->name, uargv, uenvp, regs);
 	putname(filename);
 out:
 	return error;
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 602545b..98a709f 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -491,14 +491,14 @@
 			  struct pt_regs *pregs)
 {
 	int error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname((char __user *)ufilename);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
 
-	error = do_execve(filename,
+	error = do_execve(filename->name,
 			  (const char __user *const __user *)uargv,
 			  (const char __user *const __user *)uenvp,
 			  pregs);
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index 7c831d8..73083e1 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -265,6 +265,11 @@
 #define __copy_to_user_inatomic ___copy_to_user
 #define __copy_from_user_inatomic ___copy_from_user
 
+struct pt_regs;
+extern unsigned long compute_effective_address(struct pt_regs *,
+					       unsigned int insn,
+					       unsigned int rd);
+
 #endif  /* __ASSEMBLY__ */
 
 #endif /* _ASM_UACCESS_H */
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index 14006d8..487bffb 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -482,7 +482,7 @@
 asmlinkage int sparc_execve(struct pt_regs *regs)
 {
 	int error, base = 0;
-	char *filename;
+	struct filename *filename;
 
 	/* Check for indirect call. */
 	if(regs->u_regs[UREG_G1] == 0)
@@ -492,7 +492,7 @@
 	error = PTR_ERR(filename);
 	if(IS_ERR(filename))
 		goto out;
-	error = do_execve(filename,
+	error = do_execve(filename->name,
 			  (const char __user *const  __user *)
 			  regs->u_regs[base + UREG_I1],
 			  (const char __user *const  __user *)
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index aff0c72..fcaa594 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -722,7 +722,7 @@
 asmlinkage int sparc_execve(struct pt_regs *regs)
 {
 	int error, base = 0;
-	char *filename;
+	struct filename *filename;
 
 	/* User register window flush is done by entry.S */
 
@@ -734,7 +734,7 @@
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = do_execve(filename,
+	error = do_execve(filename->name,
 			  (const char __user *const __user *)
 			  regs->u_regs[base + UREG_I1],
 			  (const char __user *const __user *)
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index d862499..c323981 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -403,7 +403,7 @@
 asmlinkage long sparc32_execve(struct pt_regs *regs)
 {
 	int error, base = 0;
-	char *filename;
+	struct filename *filename;
 
 	/* User register window flush is done by entry.S */
 
@@ -416,7 +416,7 @@
 	if (IS_ERR(filename))
 		goto out;
 
-	error = compat_do_execve(filename,
+	error = compat_do_execve(filename->name,
 				 compat_ptr(regs->u_regs[base + UREG_I1]),
 				 compat_ptr(regs->u_regs[base + UREG_I2]), regs);
 
diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S
index 1d7e274..7f5f65d 100644
--- a/arch/sparc/kernel/syscalls.S
+++ b/arch/sparc/kernel/syscalls.S
@@ -212,24 +212,20 @@
 3:	stx	%o0, [%sp + PTREGS_OFF + PT_V9_I0]
 ret_sys_call:
 	ldx	[%sp + PTREGS_OFF + PT_V9_TSTATE], %g3
-	ldx	[%sp + PTREGS_OFF + PT_V9_TNPC], %l1 ! pc = npc
 	sra	%o0, 0, %o0
 	mov	%ulo(TSTATE_XCARRY | TSTATE_ICARRY), %g2
 	sllx	%g2, 32, %g2
 
-	/* Check if force_successful_syscall_return()
-	 * was invoked.
-	 */
-	ldub	[%g6 + TI_SYS_NOERROR], %l2
-	brnz,a,pn %l2, 80f
-	 stb	%g0, [%g6 + TI_SYS_NOERROR]
-
 	cmp	%o0, -ERESTART_RESTARTBLOCK
 	bgeu,pn	%xcc, 1f
-	 andcc	%l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT), %l6
-80:
+	 andcc	%l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT), %g0
+	ldx	[%sp + PTREGS_OFF + PT_V9_TNPC], %l1 ! pc = npc
+
+2:
+	stb	%g0, [%g6 + TI_SYS_NOERROR]
 	/* System call success, clear Carry condition code. */
 	andn	%g3, %g2, %g3
+3:
 	stx	%g3, [%sp + PTREGS_OFF + PT_V9_TSTATE]	
 	bne,pn	%icc, linux_syscall_trace2
 	 add	%l1, 0x4, %l2			! npc = npc+4
@@ -238,20 +234,20 @@
 	 stx	%l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
 
 1:
+	/* Check if force_successful_syscall_return()
+	 * was invoked.
+	 */
+	ldub	[%g6 + TI_SYS_NOERROR], %l2
+	brnz,pn %l2, 2b
+	 ldx	[%sp + PTREGS_OFF + PT_V9_TNPC], %l1 ! pc = npc
 	/* System call failure, set Carry condition code.
 	 * Also, get abs(errno) to return to the process.
 	 */
-	andcc	%l0, (_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT|_TIF_SYSCALL_TRACEPOINT), %l6	
 	sub	%g0, %o0, %o0
-	or	%g3, %g2, %g3
 	stx	%o0, [%sp + PTREGS_OFF + PT_V9_I0]
-	stx	%g3, [%sp + PTREGS_OFF + PT_V9_TSTATE]
-	bne,pn	%icc, linux_syscall_trace2
-	 add	%l1, 0x4, %l2			! npc = npc+4
-	stx	%l1, [%sp + PTREGS_OFF + PT_V9_TPC]
+	ba,pt	%xcc, 3b
+	 or	%g3, %g2, %g3
 
-	b,pt	%xcc, rtrap
-	 stx	%l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
 linux_syscall_trace2:
 	call	syscall_trace_leave
 	 add	%sp, PTREGS_OFF, %o0
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index fa1f1d3..b66a779 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -1,6 +1,6 @@
 /* arch/sparc64/kernel/traps.c
  *
- * Copyright (C) 1995,1997,2008,2009 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1995,1997,2008,2009,2012 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997,1999,2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/kdebug.h>
 #include <linux/ftrace.h>
+#include <linux/reboot.h>
 #include <linux/gfp.h>
 
 #include <asm/smp.h>
@@ -1760,85 +1761,223 @@
 }
 
 struct sun4v_error_entry {
-	u64		err_handle;
-	u64		err_stick;
+	/* Unique error handle */
+/*0x00*/u64		err_handle;
 
-	u32		err_type;
+	/* %stick value at the time of the error */
+/*0x08*/u64		err_stick;
+
+/*0x10*/u8		reserved_1[3];
+
+	/* Error type */
+/*0x13*/u8		err_type;
 #define SUN4V_ERR_TYPE_UNDEFINED	0
 #define SUN4V_ERR_TYPE_UNCORRECTED_RES	1
 #define SUN4V_ERR_TYPE_PRECISE_NONRES	2
 #define SUN4V_ERR_TYPE_DEFERRED_NONRES	3
-#define SUN4V_ERR_TYPE_WARNING_RES	4
+#define SUN4V_ERR_TYPE_SHUTDOWN_RQST	4
+#define SUN4V_ERR_TYPE_DUMP_CORE	5
+#define SUN4V_ERR_TYPE_SP_STATE_CHANGE	6
+#define SUN4V_ERR_TYPE_NUM		7
 
-	u32		err_attrs;
+	/* Error attributes */
+/*0x14*/u32		err_attrs;
 #define SUN4V_ERR_ATTRS_PROCESSOR	0x00000001
 #define SUN4V_ERR_ATTRS_MEMORY		0x00000002
 #define SUN4V_ERR_ATTRS_PIO		0x00000004
 #define SUN4V_ERR_ATTRS_INT_REGISTERS	0x00000008
 #define SUN4V_ERR_ATTRS_FPU_REGISTERS	0x00000010
-#define SUN4V_ERR_ATTRS_USER_MODE	0x01000000
-#define SUN4V_ERR_ATTRS_PRIV_MODE	0x02000000
+#define SUN4V_ERR_ATTRS_SHUTDOWN_RQST	0x00000020
+#define SUN4V_ERR_ATTRS_ASR		0x00000040
+#define SUN4V_ERR_ATTRS_ASI		0x00000080
+#define SUN4V_ERR_ATTRS_PRIV_REG	0x00000100
+#define SUN4V_ERR_ATTRS_SPSTATE_MSK	0x00000600
+#define SUN4V_ERR_ATTRS_SPSTATE_SHFT	9
+#define SUN4V_ERR_ATTRS_MODE_MSK	0x03000000
+#define SUN4V_ERR_ATTRS_MODE_SHFT	24
 #define SUN4V_ERR_ATTRS_RES_QUEUE_FULL	0x80000000
 
-	u64		err_raddr;
-	u32		err_size;
-	u16		err_cpu;
-	u16		err_pad;
+#define SUN4V_ERR_SPSTATE_FAULTED	0
+#define SUN4V_ERR_SPSTATE_AVAILABLE	1
+#define SUN4V_ERR_SPSTATE_NOT_PRESENT	2
+
+#define SUN4V_ERR_MODE_USER		1
+#define SUN4V_ERR_MODE_PRIV		2
+
+	/* Real address of the memory region or PIO transaction */
+/*0x18*/u64		err_raddr;
+
+	/* Size of the operation triggering the error, in bytes */
+/*0x20*/u32		err_size;
+
+	/* ID of the CPU */
+/*0x24*/u16		err_cpu;
+
+	/* Grace periof for shutdown, in seconds */
+/*0x26*/u16		err_secs;
+
+	/* Value of the %asi register */
+/*0x28*/u8		err_asi;
+
+/*0x29*/u8		reserved_2;
+
+	/* Value of the ASR register number */
+/*0x2a*/u16		err_asr;
+#define SUN4V_ERR_ASR_VALID		0x8000
+
+/*0x2c*/u32		reserved_3;
+/*0x30*/u64		reserved_4;
+/*0x38*/u64		reserved_5;
 };
 
 static atomic_t sun4v_resum_oflow_cnt = ATOMIC_INIT(0);
 static atomic_t sun4v_nonresum_oflow_cnt = ATOMIC_INIT(0);
 
-static const char *sun4v_err_type_to_str(u32 type)
+static const char *sun4v_err_type_to_str(u8 type)
 {
-	switch (type) {
-	case SUN4V_ERR_TYPE_UNDEFINED:
-		return "undefined";
-	case SUN4V_ERR_TYPE_UNCORRECTED_RES:
-		return "uncorrected resumable";
-	case SUN4V_ERR_TYPE_PRECISE_NONRES:
-		return "precise nonresumable";
-	case SUN4V_ERR_TYPE_DEFERRED_NONRES:
-		return "deferred nonresumable";
-	case SUN4V_ERR_TYPE_WARNING_RES:
-		return "warning resumable";
-	default:
-		return "unknown";
-	}
+	static const char *types[SUN4V_ERR_TYPE_NUM] = {
+		"undefined",
+		"uncorrected resumable",
+		"precise nonresumable",
+		"deferred nonresumable",
+		"shutdown request",
+		"dump core",
+		"SP state change",
+	};
+
+	if (type < SUN4V_ERR_TYPE_NUM)
+		return types[type];
+
+	return "unknown";
 }
 
-static void sun4v_log_error(struct pt_regs *regs, struct sun4v_error_entry *ent, int cpu, const char *pfx, atomic_t *ocnt)
+static void sun4v_emit_err_attr_strings(u32 attrs)
 {
+	static const char *attr_names[] = {
+		"processor",
+		"memory",
+		"PIO",
+		"int-registers",
+		"fpu-registers",
+		"shutdown-request",
+		"ASR",
+		"ASI",
+		"priv-reg",
+	};
+	static const char *sp_states[] = {
+		"sp-faulted",
+		"sp-available",
+		"sp-not-present",
+		"sp-state-reserved",
+	};
+	static const char *modes[] = {
+		"mode-reserved0",
+		"user",
+		"priv",
+		"mode-reserved1",
+	};
+	u32 sp_state, mode;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(attr_names); i++) {
+		if (attrs & (1U << i)) {
+			const char *s = attr_names[i];
+
+			pr_cont("%s ", s);
+		}
+	}
+
+	sp_state = ((attrs & SUN4V_ERR_ATTRS_SPSTATE_MSK) >>
+		    SUN4V_ERR_ATTRS_SPSTATE_SHFT);
+	pr_cont("%s ", sp_states[sp_state]);
+
+	mode = ((attrs & SUN4V_ERR_ATTRS_MODE_MSK) >>
+		SUN4V_ERR_ATTRS_MODE_SHFT);
+	pr_cont("%s ", modes[mode]);
+
+	if (attrs & SUN4V_ERR_ATTRS_RES_QUEUE_FULL)
+		pr_cont("res-queue-full ");
+}
+
+/* When the report contains a real-address of "-1" it means that the
+ * hardware did not provide the address.  So we compute the effective
+ * address of the load or store instruction at regs->tpc and report
+ * that.  Usually when this happens it's a PIO and in such a case we
+ * are using physical addresses with bypass ASIs anyways, so what we
+ * report here is exactly what we want.
+ */
+static void sun4v_report_real_raddr(const char *pfx, struct pt_regs *regs)
+{
+	unsigned int insn;
+	u64 addr;
+
+	if (!(regs->tstate & TSTATE_PRIV))
+		return;
+
+	insn = *(unsigned int *) regs->tpc;
+
+	addr = compute_effective_address(regs, insn, 0);
+
+	printk("%s: insn effective address [0x%016llx]\n",
+	       pfx, addr);
+}
+
+static void sun4v_log_error(struct pt_regs *regs, struct sun4v_error_entry *ent,
+			    int cpu, const char *pfx, atomic_t *ocnt)
+{
+	u64 *raw_ptr = (u64 *) ent;
+	u32 attrs;
 	int cnt;
 
 	printk("%s: Reporting on cpu %d\n", pfx, cpu);
-	printk("%s: err_handle[%llx] err_stick[%llx] err_type[%08x:%s]\n",
-	       pfx,
-	       ent->err_handle, ent->err_stick,
-	       ent->err_type,
-	       sun4v_err_type_to_str(ent->err_type));
-	printk("%s: err_attrs[%08x:%s %s %s %s %s %s %s %s]\n",
-	       pfx,
-	       ent->err_attrs,
-	       ((ent->err_attrs & SUN4V_ERR_ATTRS_PROCESSOR) ?
-		"processor" : ""),
-	       ((ent->err_attrs & SUN4V_ERR_ATTRS_MEMORY) ?
-		"memory" : ""),
-	       ((ent->err_attrs & SUN4V_ERR_ATTRS_PIO) ?
-		"pio" : ""),
-	       ((ent->err_attrs & SUN4V_ERR_ATTRS_INT_REGISTERS) ?
-		"integer-regs" : ""),
-	       ((ent->err_attrs & SUN4V_ERR_ATTRS_FPU_REGISTERS) ?
-		"fpu-regs" : ""),
-	       ((ent->err_attrs & SUN4V_ERR_ATTRS_USER_MODE) ?
-		"user" : ""),
-	       ((ent->err_attrs & SUN4V_ERR_ATTRS_PRIV_MODE) ?
-		"privileged" : ""),
-	       ((ent->err_attrs & SUN4V_ERR_ATTRS_RES_QUEUE_FULL) ?
-		"queue-full" : ""));
-	printk("%s: err_raddr[%016llx] err_size[%u] err_cpu[%u]\n",
-	       pfx,
-	       ent->err_raddr, ent->err_size, ent->err_cpu);
+	printk("%s: TPC [0x%016lx] <%pS>\n",
+	       pfx, regs->tpc, (void *) regs->tpc);
+
+	printk("%s: RAW [%016llx:%016llx:%016llx:%016llx\n",
+	       pfx, raw_ptr[0], raw_ptr[1], raw_ptr[2], raw_ptr[3]);
+	printk("%s:      %016llx:%016llx:%016llx:%016llx]\n",
+	       pfx, raw_ptr[4], raw_ptr[5], raw_ptr[6], raw_ptr[7]);
+
+	printk("%s: handle [0x%016llx] stick [0x%016llx]\n",
+	       pfx, ent->err_handle, ent->err_stick);
+
+	printk("%s: type [%s]\n", pfx, sun4v_err_type_to_str(ent->err_type));
+
+	attrs = ent->err_attrs;
+	printk("%s: attrs [0x%08x] < ", pfx, attrs);
+	sun4v_emit_err_attr_strings(attrs);
+	pr_cont(">\n");
+
+	/* Various fields in the error report are only valid if
+	 * certain attribute bits are set.
+	 */
+	if (attrs & (SUN4V_ERR_ATTRS_MEMORY |
+		     SUN4V_ERR_ATTRS_PIO |
+		     SUN4V_ERR_ATTRS_ASI)) {
+		printk("%s: raddr [0x%016llx]\n", pfx, ent->err_raddr);
+
+		if (ent->err_raddr == ~(u64)0)
+			sun4v_report_real_raddr(pfx, regs);
+	}
+
+	if (attrs & (SUN4V_ERR_ATTRS_MEMORY | SUN4V_ERR_ATTRS_ASI))
+		printk("%s: size [0x%x]\n", pfx, ent->err_size);
+
+	if (attrs & (SUN4V_ERR_ATTRS_PROCESSOR |
+		     SUN4V_ERR_ATTRS_INT_REGISTERS |
+		     SUN4V_ERR_ATTRS_FPU_REGISTERS |
+		     SUN4V_ERR_ATTRS_PRIV_REG))
+		printk("%s: cpu[%u]\n", pfx, ent->err_cpu);
+
+	if (attrs & SUN4V_ERR_ATTRS_ASI)
+		printk("%s: asi [0x%02x]\n", pfx, ent->err_asi);
+
+	if ((attrs & (SUN4V_ERR_ATTRS_INT_REGISTERS |
+		      SUN4V_ERR_ATTRS_FPU_REGISTERS |
+		      SUN4V_ERR_ATTRS_PRIV_REG)) &&
+	    (ent->err_asr & SUN4V_ERR_ASR_VALID) != 0)
+		printk("%s: reg [0x%04x]\n",
+		       pfx, ent->err_asr & ~SUN4V_ERR_ASR_VALID);
 
 	show_regs(regs);
 
@@ -1874,13 +2013,15 @@
 
 	put_cpu();
 
-	if (ent->err_type == SUN4V_ERR_TYPE_WARNING_RES) {
-		/* If err_type is 0x4, it's a powerdown request.  Do
-		 * not do the usual resumable error log because that
-		 * makes it look like some abnormal error.
+	if (local_copy.err_type == SUN4V_ERR_TYPE_SHUTDOWN_RQST) {
+		/* We should really take the seconds field of
+		 * the error report and use it for the shutdown
+		 * invocation, but for now do the same thing we
+		 * do for a DS shutdown request.
 		 */
-		printk(KERN_INFO "Power down request...\n");
-		kill_cad_pid(SIGINT, 1);
+		pr_info("Shutdown request, %u seconds...\n",
+			local_copy.err_secs);
+		orderly_poweroff(true);
 		return;
 	}
 
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index 2976dba..097aee7 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -151,8 +151,6 @@
 	printk(KERN_CONT "\n");
 }
 
-extern unsigned long compute_effective_address(struct pt_regs *, unsigned int, unsigned int);
-
 static void do_fault_siginfo(int code, int sig, struct pt_regs *regs,
 			     unsigned int insn, int fault_code)
 {
diff --git a/arch/tile/include/arch/Kbuild b/arch/tile/include/arch/Kbuild
index 9c0ea24..e69de29 100644
--- a/arch/tile/include/arch/Kbuild
+++ b/arch/tile/include/arch/Kbuild
@@ -1,17 +0,0 @@
-header-y += abi.h
-header-y += chip.h
-header-y += chip_tile64.h
-header-y += chip_tilegx.h
-header-y += chip_tilepro.h
-header-y += icache.h
-header-y += interrupts.h
-header-y += interrupts_32.h
-header-y += interrupts_64.h
-header-y += opcode.h
-header-y += opcode_tilegx.h
-header-y += opcode_tilepro.h
-header-y += sim.h
-header-y += sim_def.h
-header-y += spr_def.h
-header-y += spr_def_32.h
-header-y += spr_def_64.h
diff --git a/arch/tile/include/arch/spr_def.h b/arch/tile/include/arch/spr_def.h
index d6ba449..2de83e7 100644
--- a/arch/tile/include/arch/spr_def.h
+++ b/arch/tile/include/arch/spr_def.h
@@ -11,15 +11,11 @@
  *   NON INFRINGEMENT.  See the GNU General Public License for
  *   more details.
  */
+#ifndef __ARCH_SPR_DEF_H__
+#define __ARCH_SPR_DEF_H__
 
-/* Include the proper base SPR definition file. */
-#ifdef __tilegx__
-#include <arch/spr_def_64.h>
-#else
-#include <arch/spr_def_32.h>
-#endif
+#include <uapi/arch/spr_def.h>
 
-#ifdef __KERNEL__
 
 /*
  * In addition to including the proper base SPR definition file, depending
@@ -110,4 +106,4 @@
 #define INT_INTCTRL_K \
 	_concat4(INT_INTCTRL_, CONFIG_KERNEL_PL,,)
 
-#endif /* __KERNEL__ */
+#endif /* __ARCH_SPR_DEF_H__ */
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index 5cd98fa..c68808a 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -1,10 +1,7 @@
-include include/asm-generic/Kbuild.asm
 
 header-y += ../arch/
 
-header-y += cachectl.h
 header-y += ucontext.h
-header-y += hardwall.h
 
 generic-y += bug.h
 generic-y += bugs.h
diff --git a/arch/tile/include/asm/hardwall.h b/arch/tile/include/asm/hardwall.h
index 47514a5..2f572b6 100644
--- a/arch/tile/include/asm/hardwall.h
+++ b/arch/tile/include/asm/hardwall.h
@@ -14,40 +14,11 @@
  * Provide methods for access control of per-cpu resources like
  * UDN, IDN, or IPI.
  */
-
 #ifndef _ASM_TILE_HARDWALL_H
 #define _ASM_TILE_HARDWALL_H
 
-#include <arch/chip.h>
-#include <linux/ioctl.h>
+#include <uapi/asm/hardwall.h>
 
-#define HARDWALL_IOCTL_BASE 0xa2
-
-/*
- * The HARDWALL_CREATE() ioctl is a macro with a "size" argument.
- * The resulting ioctl value is passed to the kernel in conjunction
- * with a pointer to a standard kernel bitmask of cpus.
- * For network resources (UDN or IDN) the bitmask must physically
- * represent a rectangular configuration on the chip.
- * The "size" is the number of bytes of cpu mask data.
- */
-#define _HARDWALL_CREATE 1
-#define HARDWALL_CREATE(size) \
-  _IOC(_IOC_READ, HARDWALL_IOCTL_BASE, _HARDWALL_CREATE, (size))
-
-#define _HARDWALL_ACTIVATE 2
-#define HARDWALL_ACTIVATE \
-  _IO(HARDWALL_IOCTL_BASE, _HARDWALL_ACTIVATE)
-
-#define _HARDWALL_DEACTIVATE 3
-#define HARDWALL_DEACTIVATE \
- _IO(HARDWALL_IOCTL_BASE, _HARDWALL_DEACTIVATE)
-
-#define _HARDWALL_GET_ID 4
-#define HARDWALL_GET_ID \
- _IO(HARDWALL_IOCTL_BASE, _HARDWALL_GET_ID)
-
-#ifdef __KERNEL__
 /* /proc hooks for hardwall. */
 struct proc_dir_entry;
 #ifdef CONFIG_HARDWALL
@@ -56,6 +27,4 @@
 #else
 static inline void proc_tile_hardwall_init(struct proc_dir_entry *root) {}
 #endif
-#endif
-
 #endif /* _ASM_TILE_HARDWALL_H */
diff --git a/arch/tile/include/asm/ptrace.h b/arch/tile/include/asm/ptrace.h
index c6cddd7..1a4fd9a 100644
--- a/arch/tile/include/asm/ptrace.h
+++ b/arch/tile/include/asm/ptrace.h
@@ -11,87 +11,21 @@
  *   NON INFRINGEMENT.  See the GNU General Public License for
  *   more details.
  */
-
 #ifndef _ASM_TILE_PTRACE_H
 #define _ASM_TILE_PTRACE_H
 
-#include <arch/chip.h>
-#include <arch/abi.h>
-
-/* These must match struct pt_regs, below. */
-#if CHIP_WORD_SIZE() == 32
-#define PTREGS_OFFSET_REG(n)    ((n)*4)
-#else
-#define PTREGS_OFFSET_REG(n)    ((n)*8)
-#endif
-#define PTREGS_OFFSET_BASE      0
-#define PTREGS_OFFSET_TP        PTREGS_OFFSET_REG(53)
-#define PTREGS_OFFSET_SP        PTREGS_OFFSET_REG(54)
-#define PTREGS_OFFSET_LR        PTREGS_OFFSET_REG(55)
-#define PTREGS_NR_GPRS          56
-#define PTREGS_OFFSET_PC        PTREGS_OFFSET_REG(56)
-#define PTREGS_OFFSET_EX1       PTREGS_OFFSET_REG(57)
-#define PTREGS_OFFSET_FAULTNUM  PTREGS_OFFSET_REG(58)
-#define PTREGS_OFFSET_ORIG_R0   PTREGS_OFFSET_REG(59)
-#define PTREGS_OFFSET_FLAGS     PTREGS_OFFSET_REG(60)
-#if CHIP_HAS_CMPEXCH()
-#define PTREGS_OFFSET_CMPEXCH   PTREGS_OFFSET_REG(61)
-#endif
-#define PTREGS_SIZE             PTREGS_OFFSET_REG(64)
+#include <linux/compiler.h>
 
 #ifndef __ASSEMBLY__
-
-#ifdef __KERNEL__
 /* Benefit from consistent use of "long" on all chips. */
 typedef unsigned long pt_reg_t;
-#else
-/* Provide appropriate length type to userspace regardless of -m32/-m64. */
-typedef uint_reg_t pt_reg_t;
 #endif
 
-/*
- * This struct defines the way the registers are stored on the stack during a
- * system call or exception.  "struct sigcontext" has the same shape.
- */
-struct pt_regs {
-	/* Saved main processor registers; 56..63 are special. */
-	/* tp, sp, and lr must immediately follow regs[] for aliasing. */
-	pt_reg_t regs[53];
-	pt_reg_t tp;		/* aliases regs[TREG_TP] */
-	pt_reg_t sp;		/* aliases regs[TREG_SP] */
-	pt_reg_t lr;		/* aliases regs[TREG_LR] */
+#include <uapi/asm/ptrace.h>
 
-	/* Saved special registers. */
-	pt_reg_t pc;		/* stored in EX_CONTEXT_K_0 */
-	pt_reg_t ex1;		/* stored in EX_CONTEXT_K_1 (PL and ICS bit) */
-	pt_reg_t faultnum;	/* fault number (INT_SWINT_1 for syscall) */
-	pt_reg_t orig_r0;	/* r0 at syscall entry, else zero */
-	pt_reg_t flags;		/* flags (see below) */
-#if !CHIP_HAS_CMPEXCH()
-	pt_reg_t pad[3];
-#else
-	pt_reg_t cmpexch;	/* value of CMPEXCH_VALUE SPR at interrupt */
-	pt_reg_t pad[2];
-#endif
-};
-
-#endif /* __ASSEMBLY__ */
-
-#define PTRACE_GETREGS		12
-#define PTRACE_SETREGS		13
-#define PTRACE_GETFPREGS	14
-#define PTRACE_SETFPREGS	15
-
-/* Support TILE-specific ptrace options, with events starting at 16. */
-#define PTRACE_O_TRACEMIGRATE	0x00010000
-#define PTRACE_EVENT_MIGRATE	16
-#ifdef __KERNEL__
 #define PTRACE_O_MASK_TILE	(PTRACE_O_TRACEMIGRATE)
 #define PT_TRACE_MIGRATE	0x00080000
 #define PT_TRACE_MASK_TILE	(PT_TRACE_MIGRATE)
-#endif
-
-#ifdef __KERNEL__
 
 /* Flag bits in pt_regs.flags */
 #define PT_FLAGS_DISABLE_IRQ    1  /* on return to kernel, disable irqs */
@@ -159,6 +93,4 @@
 #define SINGLESTEP_STATE_TARGET_LB              2
 #define SINGLESTEP_STATE_TARGET_UB              7
 
-#endif /* !__KERNEL__ */
-
 #endif /* _ASM_TILE_PTRACE_H */
diff --git a/arch/tile/include/asm/setup.h b/arch/tile/include/asm/setup.h
index c67eb70..d048888 100644
--- a/arch/tile/include/asm/setup.h
+++ b/arch/tile/include/asm/setup.h
@@ -11,16 +11,13 @@
  *   NON INFRINGEMENT.  See the GNU General Public License for
  *   more details.
  */
-
 #ifndef _ASM_TILE_SETUP_H
 #define _ASM_TILE_SETUP_H
 
-#define COMMAND_LINE_SIZE	2048
-
-#ifdef __KERNEL__
 
 #include <linux/pfn.h>
 #include <linux/init.h>
+#include <uapi/asm/setup.h>
 
 /*
  * Reserved space for vmalloc and iomap - defined in asm/page.h
@@ -53,6 +50,4 @@
 } while (0)
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_TILE_SETUP_H */
diff --git a/arch/tile/include/asm/signal.h b/arch/tile/include/asm/signal.h
index 1e5e49a..10e183d 100644
--- a/arch/tile/include/asm/signal.h
+++ b/arch/tile/include/asm/signal.h
@@ -11,19 +11,11 @@
  *   NON INFRINGEMENT.  See the GNU General Public License for
  *   more details.
  */
-
 #ifndef _ASM_TILE_SIGNAL_H
 #define _ASM_TILE_SIGNAL_H
 
-/* Do not notify a ptracer when this signal is handled. */
-#define SA_NOPTRACE 0x02000000u
+#include <uapi/asm/signal.h>
 
-/* Used in earlier Tilera releases, so keeping for binary compatibility. */
-#define SA_RESTORER 0x04000000u
-
-#include <asm-generic/signal.h>
-
-#if defined(__KERNEL__)
 #if !defined(__ASSEMBLY__)
 struct pt_regs;
 int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
@@ -34,6 +26,4 @@
 void trace_unhandled_signal(const char *type, struct pt_regs *regs,
 			    unsigned long address, int signo);
 #endif
-#endif
-
 #endif /* _ASM_TILE_SIGNAL_H */
diff --git a/arch/tile/include/asm/unistd.h b/arch/tile/include/asm/unistd.h
index 0e1f3e66..6e032a0 100644
--- a/arch/tile/include/asm/unistd.h
+++ b/arch/tile/include/asm/unistd.h
@@ -11,32 +11,9 @@
  *   NON INFRINGEMENT.  See the GNU General Public License for
  *   more details.
  */
-
-#if !defined(__LP64__) || defined(__SYSCALL_COMPAT)
-/* Use the flavor of this syscall that matches the 32-bit API better. */
-#define __ARCH_WANT_SYNC_FILE_RANGE2
-#endif
-
-/* Use the standard ABI for syscalls. */
-#include <asm-generic/unistd.h>
-
-/* Additional Tilera-specific syscalls. */
-#define __NR_cacheflush	(__NR_arch_specific_syscall + 1)
-__SYSCALL(__NR_cacheflush, sys_cacheflush)
-
-#ifndef __tilegx__
-/* "Fast" syscalls provide atomic support for 32-bit chips. */
-#define __NR_FAST_cmpxchg	-1
-#define __NR_FAST_atomic_update	-2
-#define __NR_FAST_cmpxchg64	-3
-#define __NR_cmpxchg_badaddr	(__NR_arch_specific_syscall + 0)
-__SYSCALL(__NR_cmpxchg_badaddr, sys_cmpxchg_badaddr)
-#endif
-
-#ifdef __KERNEL__
 /* In compat mode, we use sys_llseek() for compat_sys_llseek(). */
 #ifdef CONFIG_COMPAT
 #define __ARCH_WANT_SYS_LLSEEK
 #endif
 #define __ARCH_WANT_SYS_NEWFSTATAT
-#endif
+#include <uapi/asm/unistd.h>
diff --git a/arch/tile/include/uapi/arch/Kbuild b/arch/tile/include/uapi/arch/Kbuild
index aafaa5a..4ebc34f 100644
--- a/arch/tile/include/uapi/arch/Kbuild
+++ b/arch/tile/include/uapi/arch/Kbuild
@@ -1 +1,18 @@
 # UAPI Header export list
+header-y += abi.h
+header-y += chip.h
+header-y += chip_tile64.h
+header-y += chip_tilegx.h
+header-y += chip_tilepro.h
+header-y += icache.h
+header-y += interrupts.h
+header-y += interrupts_32.h
+header-y += interrupts_64.h
+header-y += opcode.h
+header-y += opcode_tilegx.h
+header-y += opcode_tilepro.h
+header-y += sim.h
+header-y += sim_def.h
+header-y += spr_def.h
+header-y += spr_def_32.h
+header-y += spr_def_64.h
diff --git a/arch/tile/include/arch/abi.h b/arch/tile/include/uapi/arch/abi.h
similarity index 100%
rename from arch/tile/include/arch/abi.h
rename to arch/tile/include/uapi/arch/abi.h
diff --git a/arch/tile/include/arch/chip.h b/arch/tile/include/uapi/arch/chip.h
similarity index 100%
rename from arch/tile/include/arch/chip.h
rename to arch/tile/include/uapi/arch/chip.h
diff --git a/arch/tile/include/arch/chip_tile64.h b/arch/tile/include/uapi/arch/chip_tile64.h
similarity index 100%
rename from arch/tile/include/arch/chip_tile64.h
rename to arch/tile/include/uapi/arch/chip_tile64.h
diff --git a/arch/tile/include/arch/chip_tilegx.h b/arch/tile/include/uapi/arch/chip_tilegx.h
similarity index 100%
rename from arch/tile/include/arch/chip_tilegx.h
rename to arch/tile/include/uapi/arch/chip_tilegx.h
diff --git a/arch/tile/include/arch/chip_tilepro.h b/arch/tile/include/uapi/arch/chip_tilepro.h
similarity index 100%
rename from arch/tile/include/arch/chip_tilepro.h
rename to arch/tile/include/uapi/arch/chip_tilepro.h
diff --git a/arch/tile/include/arch/icache.h b/arch/tile/include/uapi/arch/icache.h
similarity index 100%
rename from arch/tile/include/arch/icache.h
rename to arch/tile/include/uapi/arch/icache.h
diff --git a/arch/tile/include/arch/interrupts.h b/arch/tile/include/uapi/arch/interrupts.h
similarity index 100%
rename from arch/tile/include/arch/interrupts.h
rename to arch/tile/include/uapi/arch/interrupts.h
diff --git a/arch/tile/include/arch/interrupts_32.h b/arch/tile/include/uapi/arch/interrupts_32.h
similarity index 100%
rename from arch/tile/include/arch/interrupts_32.h
rename to arch/tile/include/uapi/arch/interrupts_32.h
diff --git a/arch/tile/include/arch/interrupts_64.h b/arch/tile/include/uapi/arch/interrupts_64.h
similarity index 100%
rename from arch/tile/include/arch/interrupts_64.h
rename to arch/tile/include/uapi/arch/interrupts_64.h
diff --git a/arch/tile/include/arch/opcode.h b/arch/tile/include/uapi/arch/opcode.h
similarity index 100%
rename from arch/tile/include/arch/opcode.h
rename to arch/tile/include/uapi/arch/opcode.h
diff --git a/arch/tile/include/arch/opcode_tilegx.h b/arch/tile/include/uapi/arch/opcode_tilegx.h
similarity index 100%
rename from arch/tile/include/arch/opcode_tilegx.h
rename to arch/tile/include/uapi/arch/opcode_tilegx.h
diff --git a/arch/tile/include/arch/opcode_tilepro.h b/arch/tile/include/uapi/arch/opcode_tilepro.h
similarity index 100%
rename from arch/tile/include/arch/opcode_tilepro.h
rename to arch/tile/include/uapi/arch/opcode_tilepro.h
diff --git a/arch/tile/include/arch/sim.h b/arch/tile/include/uapi/arch/sim.h
similarity index 100%
rename from arch/tile/include/arch/sim.h
rename to arch/tile/include/uapi/arch/sim.h
diff --git a/arch/tile/include/arch/sim_def.h b/arch/tile/include/uapi/arch/sim_def.h
similarity index 100%
rename from arch/tile/include/arch/sim_def.h
rename to arch/tile/include/uapi/arch/sim_def.h
diff --git a/arch/tile/include/uapi/arch/spr_def.h b/arch/tile/include/uapi/arch/spr_def.h
new file mode 100644
index 0000000..c250c5a
--- /dev/null
+++ b/arch/tile/include/uapi/arch/spr_def.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _UAPI__ARCH_SPR_DEF_H__
+#define _UAPI__ARCH_SPR_DEF_H__
+
+/* Include the proper base SPR definition file. */
+#ifdef __tilegx__
+#include <arch/spr_def_64.h>
+#else
+#include <arch/spr_def_32.h>
+#endif
+
+
+#endif /* _UAPI__ARCH_SPR_DEF_H__ */
diff --git a/arch/tile/include/arch/spr_def_32.h b/arch/tile/include/uapi/arch/spr_def_32.h
similarity index 98%
rename from arch/tile/include/arch/spr_def_32.h
rename to arch/tile/include/uapi/arch/spr_def_32.h
index 78bbce2..c689446 100644
--- a/arch/tile/include/arch/spr_def_32.h
+++ b/arch/tile/include/uapi/arch/spr_def_32.h
@@ -14,8 +14,8 @@
 
 #ifndef __DOXYGEN__
 
-#ifndef __ARCH_SPR_DEF_H__
-#define __ARCH_SPR_DEF_H__
+#ifndef __ARCH_SPR_DEF_32_H__
+#define __ARCH_SPR_DEF_32_H__
 
 #define SPR_AUX_PERF_COUNT_0 0x6005
 #define SPR_AUX_PERF_COUNT_1 0x6006
@@ -252,6 +252,6 @@
 #define SPR_WATCH_MASK 0x420a
 #define SPR_WATCH_VAL 0x420b
 
-#endif /* !defined(__ARCH_SPR_DEF_H__) */
+#endif /* !defined(__ARCH_SPR_DEF_32_H__) */
 
 #endif /* !defined(__DOXYGEN__) */
diff --git a/arch/tile/include/arch/spr_def_64.h b/arch/tile/include/uapi/arch/spr_def_64.h
similarity index 98%
rename from arch/tile/include/arch/spr_def_64.h
rename to arch/tile/include/uapi/arch/spr_def_64.h
index 0da86fa..67a6c17 100644
--- a/arch/tile/include/arch/spr_def_64.h
+++ b/arch/tile/include/uapi/arch/spr_def_64.h
@@ -14,8 +14,8 @@
 
 #ifndef __DOXYGEN__
 
-#ifndef __ARCH_SPR_DEF_H__
-#define __ARCH_SPR_DEF_H__
+#ifndef __ARCH_SPR_DEF_64_H__
+#define __ARCH_SPR_DEF_64_H__
 
 #define SPR_AUX_PERF_COUNT_0 0x2105
 #define SPR_AUX_PERF_COUNT_1 0x2106
@@ -211,6 +211,6 @@
 #define SPR_WATCH_MASK 0x200a
 #define SPR_WATCH_VAL 0x200b
 
-#endif /* !defined(__ARCH_SPR_DEF_H__) */
+#endif /* !defined(__ARCH_SPR_DEF_64_H__) */
 
 #endif /* !defined(__DOXYGEN__) */
diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild
index baebb3d..5c6915f 100644
--- a/arch/tile/include/uapi/asm/Kbuild
+++ b/arch/tile/include/uapi/asm/Kbuild
@@ -1,3 +1,18 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
+header-y += auxvec.h
+header-y += bitsperlong.h
+header-y += byteorder.h
+header-y += cachectl.h
+header-y += hardwall.h
+header-y += kvm_para.h
+header-y += mman.h
+header-y += ptrace.h
+header-y += setup.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += signal.h
+header-y += stat.h
+header-y += swab.h
+header-y += unistd.h
diff --git a/arch/tile/include/asm/auxvec.h b/arch/tile/include/uapi/asm/auxvec.h
similarity index 100%
rename from arch/tile/include/asm/auxvec.h
rename to arch/tile/include/uapi/asm/auxvec.h
diff --git a/arch/tile/include/asm/bitsperlong.h b/arch/tile/include/uapi/asm/bitsperlong.h
similarity index 100%
rename from arch/tile/include/asm/bitsperlong.h
rename to arch/tile/include/uapi/asm/bitsperlong.h
diff --git a/arch/tile/include/asm/byteorder.h b/arch/tile/include/uapi/asm/byteorder.h
similarity index 100%
rename from arch/tile/include/asm/byteorder.h
rename to arch/tile/include/uapi/asm/byteorder.h
diff --git a/arch/tile/include/asm/cachectl.h b/arch/tile/include/uapi/asm/cachectl.h
similarity index 100%
rename from arch/tile/include/asm/cachectl.h
rename to arch/tile/include/uapi/asm/cachectl.h
diff --git a/arch/tile/include/uapi/asm/hardwall.h b/arch/tile/include/uapi/asm/hardwall.h
new file mode 100644
index 0000000..c2169d4
--- /dev/null
+++ b/arch/tile/include/uapi/asm/hardwall.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * Provide methods for access control of per-cpu resources like
+ * UDN, IDN, or IPI.
+ */
+
+#ifndef _UAPI_ASM_TILE_HARDWALL_H
+#define _UAPI_ASM_TILE_HARDWALL_H
+
+#include <arch/chip.h>
+#include <linux/ioctl.h>
+
+#define HARDWALL_IOCTL_BASE 0xa2
+
+/*
+ * The HARDWALL_CREATE() ioctl is a macro with a "size" argument.
+ * The resulting ioctl value is passed to the kernel in conjunction
+ * with a pointer to a standard kernel bitmask of cpus.
+ * For network resources (UDN or IDN) the bitmask must physically
+ * represent a rectangular configuration on the chip.
+ * The "size" is the number of bytes of cpu mask data.
+ */
+#define _HARDWALL_CREATE 1
+#define HARDWALL_CREATE(size) \
+  _IOC(_IOC_READ, HARDWALL_IOCTL_BASE, _HARDWALL_CREATE, (size))
+
+#define _HARDWALL_ACTIVATE 2
+#define HARDWALL_ACTIVATE \
+  _IO(HARDWALL_IOCTL_BASE, _HARDWALL_ACTIVATE)
+
+#define _HARDWALL_DEACTIVATE 3
+#define HARDWALL_DEACTIVATE \
+ _IO(HARDWALL_IOCTL_BASE, _HARDWALL_DEACTIVATE)
+
+#define _HARDWALL_GET_ID 4
+#define HARDWALL_GET_ID \
+ _IO(HARDWALL_IOCTL_BASE, _HARDWALL_GET_ID)
+
+
+#endif /* _UAPI_ASM_TILE_HARDWALL_H */
diff --git a/arch/tile/include/asm/kvm_para.h b/arch/tile/include/uapi/asm/kvm_para.h
similarity index 100%
rename from arch/tile/include/asm/kvm_para.h
rename to arch/tile/include/uapi/asm/kvm_para.h
diff --git a/arch/tile/include/asm/mman.h b/arch/tile/include/uapi/asm/mman.h
similarity index 100%
rename from arch/tile/include/asm/mman.h
rename to arch/tile/include/uapi/asm/mman.h
diff --git a/arch/tile/include/uapi/asm/ptrace.h b/arch/tile/include/uapi/asm/ptrace.h
new file mode 100644
index 0000000..c717d0f
--- /dev/null
+++ b/arch/tile/include/uapi/asm/ptrace.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _UAPI_ASM_TILE_PTRACE_H
+#define _UAPI_ASM_TILE_PTRACE_H
+
+#include <arch/chip.h>
+#include <arch/abi.h>
+
+/* These must match struct pt_regs, below. */
+#if CHIP_WORD_SIZE() == 32
+#define PTREGS_OFFSET_REG(n)    ((n)*4)
+#else
+#define PTREGS_OFFSET_REG(n)    ((n)*8)
+#endif
+#define PTREGS_OFFSET_BASE      0
+#define PTREGS_OFFSET_TP        PTREGS_OFFSET_REG(53)
+#define PTREGS_OFFSET_SP        PTREGS_OFFSET_REG(54)
+#define PTREGS_OFFSET_LR        PTREGS_OFFSET_REG(55)
+#define PTREGS_NR_GPRS          56
+#define PTREGS_OFFSET_PC        PTREGS_OFFSET_REG(56)
+#define PTREGS_OFFSET_EX1       PTREGS_OFFSET_REG(57)
+#define PTREGS_OFFSET_FAULTNUM  PTREGS_OFFSET_REG(58)
+#define PTREGS_OFFSET_ORIG_R0   PTREGS_OFFSET_REG(59)
+#define PTREGS_OFFSET_FLAGS     PTREGS_OFFSET_REG(60)
+#if CHIP_HAS_CMPEXCH()
+#define PTREGS_OFFSET_CMPEXCH   PTREGS_OFFSET_REG(61)
+#endif
+#define PTREGS_SIZE             PTREGS_OFFSET_REG(64)
+
+
+#ifndef __ASSEMBLY__
+
+#ifndef __KERNEL__
+/* Provide appropriate length type to userspace regardless of -m32/-m64. */
+typedef uint_reg_t pt_reg_t;
+#endif
+
+/*
+ * This struct defines the way the registers are stored on the stack during a
+ * system call or exception.  "struct sigcontext" has the same shape.
+ */
+struct pt_regs {
+	/* Saved main processor registers; 56..63 are special. */
+	/* tp, sp, and lr must immediately follow regs[] for aliasing. */
+	pt_reg_t regs[53];
+	pt_reg_t tp;		/* aliases regs[TREG_TP] */
+	pt_reg_t sp;		/* aliases regs[TREG_SP] */
+	pt_reg_t lr;		/* aliases regs[TREG_LR] */
+
+	/* Saved special registers. */
+	pt_reg_t pc;		/* stored in EX_CONTEXT_K_0 */
+	pt_reg_t ex1;		/* stored in EX_CONTEXT_K_1 (PL and ICS bit) */
+	pt_reg_t faultnum;	/* fault number (INT_SWINT_1 for syscall) */
+	pt_reg_t orig_r0;	/* r0 at syscall entry, else zero */
+	pt_reg_t flags;		/* flags (see below) */
+#if !CHIP_HAS_CMPEXCH()
+	pt_reg_t pad[3];
+#else
+	pt_reg_t cmpexch;	/* value of CMPEXCH_VALUE SPR at interrupt */
+	pt_reg_t pad[2];
+#endif
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+
+/* Support TILE-specific ptrace options, with events starting at 16. */
+#define PTRACE_O_TRACEMIGRATE	0x00010000
+#define PTRACE_EVENT_MIGRATE	16
+
+
+#endif /* _UAPI_ASM_TILE_PTRACE_H */
diff --git a/arch/tile/include/uapi/asm/setup.h b/arch/tile/include/uapi/asm/setup.h
new file mode 100644
index 0000000..e6f7da2
--- /dev/null
+++ b/arch/tile/include/uapi/asm/setup.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _UAPI_ASM_TILE_SETUP_H
+#define _UAPI_ASM_TILE_SETUP_H
+
+#define COMMAND_LINE_SIZE	2048
+
+
+#endif /* _UAPI_ASM_TILE_SETUP_H */
diff --git a/arch/tile/include/asm/sigcontext.h b/arch/tile/include/uapi/asm/sigcontext.h
similarity index 100%
rename from arch/tile/include/asm/sigcontext.h
rename to arch/tile/include/uapi/asm/sigcontext.h
diff --git a/arch/tile/include/asm/siginfo.h b/arch/tile/include/uapi/asm/siginfo.h
similarity index 100%
rename from arch/tile/include/asm/siginfo.h
rename to arch/tile/include/uapi/asm/siginfo.h
diff --git a/arch/tile/include/uapi/asm/signal.h b/arch/tile/include/uapi/asm/signal.h
new file mode 100644
index 0000000..ef0d32d
--- /dev/null
+++ b/arch/tile/include/uapi/asm/signal.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _UAPI_ASM_TILE_SIGNAL_H
+#define _UAPI_ASM_TILE_SIGNAL_H
+
+/* Do not notify a ptracer when this signal is handled. */
+#define SA_NOPTRACE 0x02000000u
+
+/* Used in earlier Tilera releases, so keeping for binary compatibility. */
+#define SA_RESTORER 0x04000000u
+
+#include <asm-generic/signal.h>
+
+
+#endif /* _UAPI_ASM_TILE_SIGNAL_H */
diff --git a/arch/tile/include/asm/stat.h b/arch/tile/include/uapi/asm/stat.h
similarity index 100%
rename from arch/tile/include/asm/stat.h
rename to arch/tile/include/uapi/asm/stat.h
diff --git a/arch/tile/include/asm/swab.h b/arch/tile/include/uapi/asm/swab.h
similarity index 100%
rename from arch/tile/include/asm/swab.h
rename to arch/tile/include/uapi/asm/swab.h
diff --git a/arch/tile/include/uapi/asm/unistd.h b/arch/tile/include/uapi/asm/unistd.h
new file mode 100644
index 0000000..cd7b6dd
--- /dev/null
+++ b/arch/tile/include/uapi/asm/unistd.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#if !defined(__LP64__) || defined(__SYSCALL_COMPAT)
+/* Use the flavor of this syscall that matches the 32-bit API better. */
+#define __ARCH_WANT_SYNC_FILE_RANGE2
+#endif
+
+/* Use the standard ABI for syscalls. */
+#include <asm-generic/unistd.h>
+
+/* Additional Tilera-specific syscalls. */
+#define __NR_cacheflush	(__NR_arch_specific_syscall + 1)
+__SYSCALL(__NR_cacheflush, sys_cacheflush)
+
+#ifndef __tilegx__
+/* "Fast" syscalls provide atomic support for 32-bit chips. */
+#define __NR_FAST_cmpxchg	-1
+#define __NR_FAST_atomic_update	-2
+#define __NR_FAST_cmpxchg64	-3
+#define __NR_cmpxchg_badaddr	(__NR_arch_specific_syscall + 0)
+__SYSCALL(__NR_cmpxchg_badaddr, sys_cmpxchg_badaddr)
+#endif
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 6be7991..307d010 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -548,6 +548,9 @@
 	if (!user_mode(regs))
 		return 0;
 
+	/* Enable interrupts; they are disabled again on return to caller. */
+	local_irq_enable();
+
 	if (thread_info_flags & _TIF_NEED_RESCHED) {
 		schedule();
 		return 1;
@@ -594,13 +597,13 @@
 		struct pt_regs *, regs)
 {
 	long error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname(path);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = do_execve(filename, argv, envp, regs);
+	error = do_execve(filename->name, argv, envp, regs);
 	putname(filename);
 	if (error == 0)
 		single_step_execve();
@@ -615,13 +618,13 @@
 		       struct pt_regs *regs)
 {
 	long error;
-	char *filename;
+	struct filename *filename;
 
 	filename = getname(path);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = compat_do_execve(filename, argv, envp, regs);
+	error = compat_do_execve(filename->name, argv, envp, regs);
 	putname(filename);
 	if (error == 0)
 		single_step_execve();
diff --git a/arch/um/include/asm/processor-generic.h b/arch/um/include/asm/processor-generic.h
index 1e82e95..c03cd5a 100644
--- a/arch/um/include/asm/processor-generic.h
+++ b/arch/um/include/asm/processor-generic.h
@@ -26,7 +26,6 @@
 	jmp_buf *fault_catcher;
 	struct task_struct *prev_sched;
 	unsigned long temp_stack;
-	jmp_buf *exec_buf;
 	struct arch_thread arch;
 	jmp_buf switch_buf;
 	int mm_count;
@@ -54,7 +53,6 @@
 	.fault_addr		= NULL, \
 	.prev_sched		= NULL, \
 	.temp_stack		= 0, \
-	.exec_buf		= NULL, \
 	.arch			= INIT_ARCH_THREAD, \
 	.request		= { 0 } \
 }
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
index 4488304..95feaa4 100644
--- a/arch/um/include/shared/os.h
+++ b/arch/um/include/shared/os.h
@@ -191,7 +191,6 @@
 extern int os_getpgrp(void);
 
 extern void init_new_thread_signals(void);
-extern int run_kernel_thread(int (*fn)(void *), void *arg, jmp_buf **jmp_ptr);
 
 extern int os_map_memory(void *virt, int fd, unsigned long long off,
 			 unsigned long len, int r, int w, int x);
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index ab019c7..3a8ece7 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -47,8 +47,3 @@
 #endif
 }
 EXPORT_SYMBOL(start_thread);
-
-void __noreturn ret_from_kernel_execve(struct pt_regs *unused)
-{
-	UML_LONGJMP(current->thread.exec_buf, 1);
-}
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 3062978..b6d699c 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -135,14 +135,10 @@
 	arg = current->thread.request.u.thread.arg;
 
 	/*
-	 * The return value is 1 if the kernel thread execs a process,
-	 * 0 if it just exits
+	 * callback returns only if the kernel thread execs a process
 	 */
-	n = run_kernel_thread(fn, arg, &current->thread.exec_buf);
-	if (n == 1)
-		userspace(&current->thread.regs.regs);
-	else
-		do_exit(0);
+	n = fn(arg);
+	userspace(&current->thread.regs.regs);
 }
 
 /* Called magically, see new_thread_handler above */
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index 162bea3..b8f34c9 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -244,16 +244,3 @@
 	signal(SIGWINCH, SIG_IGN);
 	signal(SIGTERM, SIG_DFL);
 }
-
-int run_kernel_thread(int (*fn)(void *), void *arg, jmp_buf **jmp_ptr)
-{
-	jmp_buf buf;
-	int n;
-
-	*jmp_ptr = &buf;
-	n = UML_SETJMP(&buf);
-	if (n != 0)
-		return n;
-	(*fn)(arg);
-	return 0;
-}
diff --git a/arch/unicore32/kernel/sys.c b/arch/unicore32/kernel/sys.c
index 5fd9af7..fabdee9 100644
--- a/arch/unicore32/kernel/sys.c
+++ b/arch/unicore32/kernel/sys.c
@@ -51,13 +51,13 @@
 			  struct pt_regs *regs)
 {
 	int error;
-	char *fn;
+	struct filename *fn;
 
 	fn = getname(filename);
 	error = PTR_ERR(fn);
 	if (IS_ERR(fn))
 		goto out;
-	error = do_execve(fn, argv, envp, regs);
+	error = do_execve(fn->name, argv, envp, regs);
 	putname(fn);
 out:
 	return error;
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 42d2c35..70071b1 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -109,6 +109,7 @@
 	select HAVE_RCU_USER_QS if X86_64
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select GENERIC_KERNEL_THREAD
+	select GENERIC_KERNEL_EXECVE
 
 config INSTRUCTION_DECODER
 	def_bool y
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index fbee971..7f0edce 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -121,6 +121,11 @@
 #define MSR_P6_EVNTSEL0			0x00000186
 #define MSR_P6_EVNTSEL1			0x00000187
 
+#define MSR_KNC_PERFCTR0               0x00000020
+#define MSR_KNC_PERFCTR1               0x00000021
+#define MSR_KNC_EVNTSEL0               0x00000028
+#define MSR_KNC_EVNTSEL1               0x00000029
+
 /* AMD64 MSRs. Not complete. See the architecture manual for a more
    complete list. */
 
diff --git a/arch/x86/include/asm/unistd.h b/arch/x86/include/asm/unistd.h
index 55d1555..16f3fc6 100644
--- a/arch/x86/include/asm/unistd.h
+++ b/arch/x86/include/asm/unistd.h
@@ -51,7 +51,6 @@
 # define __ARCH_WANT_SYS_UTIME
 # define __ARCH_WANT_SYS_WAITPID
 # define __ARCH_WANT_SYS_EXECVE
-# define __ARCH_WANT_KERNEL_EXECVE
 
 /*
  * "Conditional" syscalls
diff --git a/arch/x86/include/asm/vgtod.h b/arch/x86/include/asm/vgtod.h
index 8b38be2..46e24d3 100644
--- a/arch/x86/include/asm/vgtod.h
+++ b/arch/x86/include/asm/vgtod.h
@@ -17,8 +17,8 @@
 
 	/* open coded 'struct timespec' */
 	time_t		wall_time_sec;
-	u32		wall_time_nsec;
-	u32		monotonic_time_nsec;
+	u64		wall_time_snsec;
+	u64		monotonic_time_snsec;
 	time_t		monotonic_time_sec;
 
 	struct timezone sys_tz;
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index d30a6a9..a0e067d 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -32,7 +32,7 @@
 
 ifdef CONFIG_PERF_EVENTS
 obj-$(CONFIG_CPU_SUP_AMD)		+= perf_event_amd.o
-obj-$(CONFIG_CPU_SUP_INTEL)		+= perf_event_p6.o perf_event_p4.o
+obj-$(CONFIG_CPU_SUP_INTEL)		+= perf_event_p6.o perf_event_knc.o perf_event_p4.o
 obj-$(CONFIG_CPU_SUP_INTEL)		+= perf_event_intel_lbr.o perf_event_intel_ds.o perf_event_intel.o
 obj-$(CONFIG_CPU_SUP_INTEL)		+= perf_event_intel_uncore.o
 endif
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index 8b6defe..271d257 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -626,6 +626,8 @@
 
 int p6_pmu_init(void);
 
+int knc_pmu_init(void);
+
 #else /* CONFIG_CPU_SUP_INTEL */
 
 static inline void reserve_ds_buffers(void)
diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
index eebd5ff..6336bcb 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c
+++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
@@ -41,17 +41,22 @@
 };
 
 struct perf_ibs {
-	struct pmu	pmu;
-	unsigned int	msr;
-	u64		config_mask;
-	u64		cnt_mask;
-	u64		enable_mask;
-	u64		valid_mask;
-	u64		max_period;
-	unsigned long	offset_mask[1];
-	int		offset_max;
-	struct cpu_perf_ibs __percpu *pcpu;
-	u64		(*get_count)(u64 config);
+	struct pmu			pmu;
+	unsigned int			msr;
+	u64				config_mask;
+	u64				cnt_mask;
+	u64				enable_mask;
+	u64				valid_mask;
+	u64				max_period;
+	unsigned long			offset_mask[1];
+	int				offset_max;
+	struct cpu_perf_ibs __percpu	*pcpu;
+
+	struct attribute		**format_attrs;
+	struct attribute_group		format_group;
+	const struct attribute_group	*attr_groups[2];
+
+	u64				(*get_count)(u64 config);
 };
 
 struct perf_ibs_data {
@@ -446,6 +451,19 @@
 
 static void perf_ibs_read(struct perf_event *event) { }
 
+PMU_FORMAT_ATTR(rand_en,	"config:57");
+PMU_FORMAT_ATTR(cnt_ctl,	"config:19");
+
+static struct attribute *ibs_fetch_format_attrs[] = {
+	&format_attr_rand_en.attr,
+	NULL,
+};
+
+static struct attribute *ibs_op_format_attrs[] = {
+	NULL,	/* &format_attr_cnt_ctl.attr if IBS_CAPS_OPCNT */
+	NULL,
+};
+
 static struct perf_ibs perf_ibs_fetch = {
 	.pmu = {
 		.task_ctx_nr	= perf_invalid_context,
@@ -465,6 +483,7 @@
 	.max_period		= IBS_FETCH_MAX_CNT << 4,
 	.offset_mask		= { MSR_AMD64_IBSFETCH_REG_MASK },
 	.offset_max		= MSR_AMD64_IBSFETCH_REG_COUNT,
+	.format_attrs		= ibs_fetch_format_attrs,
 
 	.get_count		= get_ibs_fetch_count,
 };
@@ -488,6 +507,7 @@
 	.max_period		= IBS_OP_MAX_CNT << 4,
 	.offset_mask		= { MSR_AMD64_IBSOP_REG_MASK },
 	.offset_max		= MSR_AMD64_IBSOP_REG_COUNT,
+	.format_attrs		= ibs_op_format_attrs,
 
 	.get_count		= get_ibs_op_count,
 };
@@ -597,6 +617,17 @@
 
 	perf_ibs->pcpu = pcpu;
 
+	/* register attributes */
+	if (perf_ibs->format_attrs[0]) {
+		memset(&perf_ibs->format_group, 0, sizeof(perf_ibs->format_group));
+		perf_ibs->format_group.name	= "format";
+		perf_ibs->format_group.attrs	= perf_ibs->format_attrs;
+
+		memset(&perf_ibs->attr_groups, 0, sizeof(perf_ibs->attr_groups));
+		perf_ibs->attr_groups[0]	= &perf_ibs->format_group;
+		perf_ibs->pmu.attr_groups	= perf_ibs->attr_groups;
+	}
+
 	ret = perf_pmu_register(&perf_ibs->pmu, name, -1);
 	if (ret) {
 		perf_ibs->pcpu = NULL;
@@ -608,13 +639,19 @@
 
 static __init int perf_event_ibs_init(void)
 {
+	struct attribute **attr = ibs_op_format_attrs;
+
 	if (!ibs_caps)
 		return -ENODEV;	/* ibs not supported by the cpu */
 
 	perf_ibs_pmu_init(&perf_ibs_fetch, "ibs_fetch");
-	if (ibs_caps & IBS_CAPS_OPCNT)
+
+	if (ibs_caps & IBS_CAPS_OPCNT) {
 		perf_ibs_op.config_mask |= IBS_OP_CNT_CTL;
+		*attr++ = &format_attr_cnt_ctl.attr;
+	}
 	perf_ibs_pmu_init(&perf_ibs_op, "ibs_op");
+
 	register_nmi_handler(NMI_LOCAL, perf_ibs_nmi_handler, 0, "perf_ibs");
 	printk(KERN_INFO "perf: AMD IBS detected (0x%08x)\n", ibs_caps);
 
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 6bca492..324bb52 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -1906,6 +1906,8 @@
 		switch (boot_cpu_data.x86) {
 		case 0x6:
 			return p6_pmu_init();
+		case 0xb:
+			return knc_pmu_init();
 		case 0xf:
 			return p4_pmu_init();
 		}
diff --git a/arch/x86/kernel/cpu/perf_event_knc.c b/arch/x86/kernel/cpu/perf_event_knc.c
new file mode 100644
index 0000000..7c46bfd
--- /dev/null
+++ b/arch/x86/kernel/cpu/perf_event_knc.c
@@ -0,0 +1,248 @@
+/* Driver for Intel Xeon Phi "Knights Corner" PMU */
+
+#include <linux/perf_event.h>
+#include <linux/types.h>
+
+#include "perf_event.h"
+
+static const u64 knc_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]		= 0x002a,
+  [PERF_COUNT_HW_INSTRUCTIONS]		= 0x0016,
+  [PERF_COUNT_HW_CACHE_REFERENCES]	= 0x0028,
+  [PERF_COUNT_HW_CACHE_MISSES]		= 0x0029,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= 0x0012,
+  [PERF_COUNT_HW_BRANCH_MISSES]		= 0x002b,
+};
+
+static __initconst u64 knc_hw_cache_event_ids
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+	[ C(OP_READ) ] = {
+		/* On Xeon Phi event "0" is a valid DATA_READ          */
+		/*   (L1 Data Cache Reads) Instruction.                */
+		/* We code this as ARCH_PERFMON_EVENTSEL_INT as this   */
+		/* bit will always be set in x86_pmu_hw_config().      */
+		[ C(RESULT_ACCESS) ] = ARCH_PERFMON_EVENTSEL_INT,
+						/* DATA_READ           */
+		[ C(RESULT_MISS)   ] = 0x0003,	/* DATA_READ_MISS      */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0001,	/* DATA_WRITE          */
+		[ C(RESULT_MISS)   ] = 0x0004,	/* DATA_WRITE_MISS     */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0011,	/* L1_DATA_PF1         */
+		[ C(RESULT_MISS)   ] = 0x001c,	/* L1_DATA_PF1_MISS    */
+	},
+ },
+ [ C(L1I ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x000c,	/* CODE_READ          */
+		[ C(RESULT_MISS)   ] = 0x000e,	/* CODE_CACHE_MISS    */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0x0,
+	},
+ },
+ [ C(LL  ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0,
+		[ C(RESULT_MISS)   ] = 0x10cb,	/* L2_READ_MISS */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x10cc,	/* L2_WRITE_HIT */
+		[ C(RESULT_MISS)   ] = 0,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x10fc,	/* L2_DATA_PF2      */
+		[ C(RESULT_MISS)   ] = 0x10fe,	/* L2_DATA_PF2_MISS */
+	},
+ },
+ [ C(DTLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = ARCH_PERFMON_EVENTSEL_INT,
+						/* DATA_READ */
+						/* see note on L1 OP_READ */
+		[ C(RESULT_MISS)   ] = 0x0002,	/* DATA_PAGE_WALK */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0001,	/* DATA_WRITE */
+		[ C(RESULT_MISS)   ] = 0x0002,	/* DATA_PAGE_WALK */
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0,
+		[ C(RESULT_MISS)   ] = 0x0,
+	},
+ },
+ [ C(ITLB) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x000c,	/* CODE_READ */
+		[ C(RESULT_MISS)   ] = 0x000d,	/* CODE_PAGE_WALK */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+ [ C(BPU ) ] = {
+	[ C(OP_READ) ] = {
+		[ C(RESULT_ACCESS) ] = 0x0012,	/* BRANCHES */
+		[ C(RESULT_MISS)   ] = 0x002b,	/* BRANCHES_MISPREDICTED */
+	},
+	[ C(OP_WRITE) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+	[ C(OP_PREFETCH) ] = {
+		[ C(RESULT_ACCESS) ] = -1,
+		[ C(RESULT_MISS)   ] = -1,
+	},
+ },
+};
+
+
+static u64 knc_pmu_event_map(int hw_event)
+{
+	return knc_perfmon_event_map[hw_event];
+}
+
+static struct event_constraint knc_event_constraints[] =
+{
+	INTEL_EVENT_CONSTRAINT(0xc3, 0x1),	/* HWP_L2HIT */
+	INTEL_EVENT_CONSTRAINT(0xc4, 0x1),	/* HWP_L2MISS */
+	INTEL_EVENT_CONSTRAINT(0xc8, 0x1),	/* L2_READ_HIT_E */
+	INTEL_EVENT_CONSTRAINT(0xc9, 0x1),	/* L2_READ_HIT_M */
+	INTEL_EVENT_CONSTRAINT(0xca, 0x1),	/* L2_READ_HIT_S */
+	INTEL_EVENT_CONSTRAINT(0xcb, 0x1),	/* L2_READ_MISS */
+	INTEL_EVENT_CONSTRAINT(0xcc, 0x1),	/* L2_WRITE_HIT */
+	INTEL_EVENT_CONSTRAINT(0xce, 0x1),	/* L2_STRONGLY_ORDERED_STREAMING_VSTORES_MISS */
+	INTEL_EVENT_CONSTRAINT(0xcf, 0x1),	/* L2_WEAKLY_ORDERED_STREAMING_VSTORE_MISS */
+	INTEL_EVENT_CONSTRAINT(0xd7, 0x1),	/* L2_VICTIM_REQ_WITH_DATA */
+	INTEL_EVENT_CONSTRAINT(0xe3, 0x1),	/* SNP_HITM_BUNIT */
+	INTEL_EVENT_CONSTRAINT(0xe6, 0x1),	/* SNP_HIT_L2 */
+	INTEL_EVENT_CONSTRAINT(0xe7, 0x1),	/* SNP_HITM_L2 */
+	INTEL_EVENT_CONSTRAINT(0xf1, 0x1),	/* L2_DATA_READ_MISS_CACHE_FILL */
+	INTEL_EVENT_CONSTRAINT(0xf2, 0x1),	/* L2_DATA_WRITE_MISS_CACHE_FILL */
+	INTEL_EVENT_CONSTRAINT(0xf6, 0x1),	/* L2_DATA_READ_MISS_MEM_FILL */
+	INTEL_EVENT_CONSTRAINT(0xf7, 0x1),	/* L2_DATA_WRITE_MISS_MEM_FILL */
+	INTEL_EVENT_CONSTRAINT(0xfc, 0x1),	/* L2_DATA_PF2 */
+	INTEL_EVENT_CONSTRAINT(0xfd, 0x1),	/* L2_DATA_PF2_DROP */
+	INTEL_EVENT_CONSTRAINT(0xfe, 0x1),	/* L2_DATA_PF2_MISS */
+	INTEL_EVENT_CONSTRAINT(0xff, 0x1),	/* L2_DATA_HIT_INFLIGHT_PF2 */
+	EVENT_CONSTRAINT_END
+};
+
+#define MSR_KNC_IA32_PERF_GLOBAL_STATUS		0x0000002d
+#define MSR_KNC_IA32_PERF_GLOBAL_OVF_CONTROL	0x0000002e
+#define MSR_KNC_IA32_PERF_GLOBAL_CTRL		0x0000002f
+
+#define KNC_ENABLE_COUNTER0			0x00000001
+#define KNC_ENABLE_COUNTER1			0x00000002
+
+static void knc_pmu_disable_all(void)
+{
+	u64 val;
+
+	rdmsrl(MSR_KNC_IA32_PERF_GLOBAL_CTRL, val);
+	val &= ~(KNC_ENABLE_COUNTER0|KNC_ENABLE_COUNTER1);
+	wrmsrl(MSR_KNC_IA32_PERF_GLOBAL_CTRL, val);
+}
+
+static void knc_pmu_enable_all(int added)
+{
+	u64 val;
+
+	rdmsrl(MSR_KNC_IA32_PERF_GLOBAL_CTRL, val);
+	val |= (KNC_ENABLE_COUNTER0|KNC_ENABLE_COUNTER1);
+	wrmsrl(MSR_KNC_IA32_PERF_GLOBAL_CTRL, val);
+}
+
+static inline void
+knc_pmu_disable_event(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	u64 val;
+
+	val = hwc->config;
+	if (cpuc->enabled)
+		val &= ~ARCH_PERFMON_EVENTSEL_ENABLE;
+
+	(void)wrmsrl_safe(hwc->config_base + hwc->idx, val);
+}
+
+static void knc_pmu_enable_event(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	u64 val;
+
+	val = hwc->config;
+	if (cpuc->enabled)
+		val |= ARCH_PERFMON_EVENTSEL_ENABLE;
+
+	(void)wrmsrl_safe(hwc->config_base + hwc->idx, val);
+}
+
+PMU_FORMAT_ATTR(event,	"config:0-7"	);
+PMU_FORMAT_ATTR(umask,	"config:8-15"	);
+PMU_FORMAT_ATTR(edge,	"config:18"	);
+PMU_FORMAT_ATTR(inv,	"config:23"	);
+PMU_FORMAT_ATTR(cmask,	"config:24-31"	);
+
+static struct attribute *intel_knc_formats_attr[] = {
+	&format_attr_event.attr,
+	&format_attr_umask.attr,
+	&format_attr_edge.attr,
+	&format_attr_inv.attr,
+	&format_attr_cmask.attr,
+	NULL,
+};
+
+static __initconst struct x86_pmu knc_pmu = {
+	.name			= "knc",
+	.handle_irq		= x86_pmu_handle_irq,
+	.disable_all		= knc_pmu_disable_all,
+	.enable_all		= knc_pmu_enable_all,
+	.enable			= knc_pmu_enable_event,
+	.disable		= knc_pmu_disable_event,
+	.hw_config		= x86_pmu_hw_config,
+	.schedule_events	= x86_schedule_events,
+	.eventsel		= MSR_KNC_EVNTSEL0,
+	.perfctr		= MSR_KNC_PERFCTR0,
+	.event_map		= knc_pmu_event_map,
+	.max_events             = ARRAY_SIZE(knc_perfmon_event_map),
+	.apic			= 1,
+	.max_period		= (1ULL << 31) - 1,
+	.version		= 0,
+	.num_counters		= 2,
+	/* in theory 40 bits, early silicon is buggy though */
+	.cntval_bits		= 32,
+	.cntval_mask		= (1ULL << 32) - 1,
+	.get_event_constraints	= x86_get_event_constraints,
+	.event_constraints	= knc_event_constraints,
+	.format_attrs		= intel_knc_formats_attr,
+};
+
+__init int knc_pmu_init(void)
+{
+	x86_pmu = knc_pmu;
+
+	memcpy(hw_cache_event_ids, knc_hw_cache_event_ids, 
+		sizeof(hw_cache_event_ids));
+
+	return 0;
+}
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 966512b..2e8caf0 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -56,6 +56,8 @@
 		switch (boot_cpu_data.x86) {
 		case 6:
 			return msr - MSR_P6_PERFCTR0;
+		case 11:
+			return msr - MSR_KNC_PERFCTR0;
 		case 15:
 			return msr - MSR_P4_BPU_PERFCTR0;
 		}
@@ -82,6 +84,8 @@
 		switch (boot_cpu_data.x86) {
 		case 6:
 			return msr - MSR_P6_EVNTSEL0;
+		case 11:
+			return msr - MSR_KNC_EVNTSEL0;
 		case 15:
 			return msr - MSR_P4_BSU_ESCR0;
 		}
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 2c63407..a1193ae 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -299,12 +299,20 @@
 	CFI_ENDPROC
 END(ret_from_fork)
 
-ENTRY(ret_from_kernel_execve)
-	movl %eax, %esp
-	movl $0,PT_EAX(%esp)
+ENTRY(ret_from_kernel_thread)
+	CFI_STARTPROC
+	pushl_cfi %eax
+	call schedule_tail
 	GET_THREAD_INFO(%ebp)
+	popl_cfi %eax
+	pushl_cfi $0x0202		# Reset kernel eflags
+	popfl_cfi
+	movl PT_EBP(%esp),%eax
+	call *PT_EBX(%esp)
+	movl $0,PT_EAX(%esp)
 	jmp syscall_exit
-END(ret_from_kernel_execve)
+	CFI_ENDPROC
+ENDPROC(ret_from_kernel_thread)
 
 /*
  * Interrupt exit functions should be protected against kprobes
@@ -1015,21 +1023,6 @@
  */
 	.popsection
 
-ENTRY(ret_from_kernel_thread)
-	CFI_STARTPROC
-	pushl_cfi %eax
-	call schedule_tail
-	GET_THREAD_INFO(%ebp)
-	popl_cfi %eax
-	pushl_cfi $0x0202		# Reset kernel eflags
-	popfl_cfi
-	movl PT_EBP(%esp),%eax
-	call *PT_EBX(%esp)
-	call do_exit
-	ud2			# padding for call trace
-	CFI_ENDPROC
-ENDPROC(ret_from_kernel_thread)
-
 #ifdef CONFIG_XEN
 /* Xen doesn't set %esp to be precisely what the normal sysenter
    entrypoint expects, so fix it up before using the normal path. */
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index cdc790c..0c58952 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -563,15 +563,13 @@
 	jmp ret_from_sys_call			# go to the SYSRET fastpath
 
 1:
-	subq $REST_SKIP, %rsp	# move the stack pointer back
+	subq $REST_SKIP, %rsp	# leave space for volatiles
 	CFI_ADJUST_CFA_OFFSET	REST_SKIP
 	movq %rbp, %rdi
 	call *%rbx
-	# exit
-	mov %eax, %edi
-	call do_exit
-	ud2			# padding for call trace
-
+	movl $0, RAX(%rsp)
+	RESTORE_REST
+	jmp int_ret_from_sys_call
 	CFI_ENDPROC
 END(ret_from_fork)
 
@@ -1326,20 +1324,6 @@
 	jmp  2b
 	.previous
 
-ENTRY(ret_from_kernel_execve)
-	movq %rdi, %rsp
-	movl $0, RAX(%rsp)
-	// RESTORE_REST
-	movq 0*8(%rsp), %r15
-	movq 1*8(%rsp), %r14
-	movq 2*8(%rsp), %r13
-	movq 3*8(%rsp), %r12
-	movq 4*8(%rsp), %rbp
-	movq 5*8(%rsp), %rbx
-	addq $(6*8), %rsp
-	jmp int_ret_from_sys_call
-END(ret_from_kernel_execve)
-
 /* Call softirq on interrupt stack. Interrupts are off. */
 ENTRY(call_softirq)
 	CFI_STARTPROC
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 3f61904..836f832 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -746,7 +746,9 @@
 int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
 {
 	int err;
+#ifdef CONFIG_DEBUG_RODATA
 	char opc[BREAK_INSTR_SIZE];
+#endif /* CONFIG_DEBUG_RODATA */
 
 	bpt->type = BP_BREAKPOINT;
 	err = probe_kernel_read(bpt->saved_instr, (char *)bpt->bpt_addr,
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d609be0..a2bb18e 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -68,6 +68,7 @@
 #include <linux/percpu.h>
 #include <linux/crash_dump.h>
 #include <linux/tboot.h>
+#include <linux/jiffies.h>
 
 #include <video/edid.h>
 
@@ -1032,6 +1033,8 @@
 	mcheck_init();
 
 	arch_init_ideal_nops();
+
+	register_refined_jiffies(CLOCK_TICK_RATE);
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 8d141b3..3a3e8c9 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -28,7 +28,7 @@
 #include <linux/jiffies.h>
 #include <linux/sysctl.h>
 #include <linux/topology.h>
-#include <linux/clocksource.h>
+#include <linux/timekeeper_internal.h>
 #include <linux/getcpu.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
@@ -82,32 +82,41 @@
 	vsyscall_gtod_data.sys_tz = sys_tz;
 }
 
-void update_vsyscall(struct timespec *wall_time, struct timespec *wtm,
-			struct clocksource *clock, u32 mult)
+void update_vsyscall(struct timekeeper *tk)
 {
-	struct timespec monotonic;
+	struct vsyscall_gtod_data *vdata = &vsyscall_gtod_data;
 
-	write_seqcount_begin(&vsyscall_gtod_data.seq);
+	write_seqcount_begin(&vdata->seq);
 
 	/* copy vsyscall data */
-	vsyscall_gtod_data.clock.vclock_mode	= clock->archdata.vclock_mode;
-	vsyscall_gtod_data.clock.cycle_last	= clock->cycle_last;
-	vsyscall_gtod_data.clock.mask		= clock->mask;
-	vsyscall_gtod_data.clock.mult		= mult;
-	vsyscall_gtod_data.clock.shift		= clock->shift;
+	vdata->clock.vclock_mode	= tk->clock->archdata.vclock_mode;
+	vdata->clock.cycle_last		= tk->clock->cycle_last;
+	vdata->clock.mask		= tk->clock->mask;
+	vdata->clock.mult		= tk->mult;
+	vdata->clock.shift		= tk->shift;
 
-	vsyscall_gtod_data.wall_time_sec	= wall_time->tv_sec;
-	vsyscall_gtod_data.wall_time_nsec	= wall_time->tv_nsec;
+	vdata->wall_time_sec		= tk->xtime_sec;
+	vdata->wall_time_snsec		= tk->xtime_nsec;
 
-	monotonic = timespec_add(*wall_time, *wtm);
-	vsyscall_gtod_data.monotonic_time_sec	= monotonic.tv_sec;
-	vsyscall_gtod_data.monotonic_time_nsec	= monotonic.tv_nsec;
+	vdata->monotonic_time_sec	= tk->xtime_sec
+					+ tk->wall_to_monotonic.tv_sec;
+	vdata->monotonic_time_snsec	= tk->xtime_nsec
+					+ (tk->wall_to_monotonic.tv_nsec
+						<< tk->shift);
+	while (vdata->monotonic_time_snsec >=
+					(((u64)NSEC_PER_SEC) << tk->shift)) {
+		vdata->monotonic_time_snsec -=
+					((u64)NSEC_PER_SEC) << tk->shift;
+		vdata->monotonic_time_sec++;
+	}
 
-	vsyscall_gtod_data.wall_time_coarse	= __current_kernel_time();
-	vsyscall_gtod_data.monotonic_time_coarse =
-		timespec_add(vsyscall_gtod_data.wall_time_coarse, *wtm);
+	vdata->wall_time_coarse.tv_sec	= tk->xtime_sec;
+	vdata->wall_time_coarse.tv_nsec	= (long)(tk->xtime_nsec >> tk->shift);
 
-	write_seqcount_end(&vsyscall_gtod_data.seq);
+	vdata->monotonic_time_coarse	= timespec_add(vdata->wall_time_coarse,
+							tk->wall_to_monotonic);
+
+	write_seqcount_end(&vdata->seq);
 }
 
 static void warn_bad_vsyscall(const char *level, struct pt_regs *regs,
diff --git a/arch/x86/um/Kconfig b/arch/x86/um/Kconfig
index 30c4eec..9fa950d 100644
--- a/arch/x86/um/Kconfig
+++ b/arch/x86/um/Kconfig
@@ -14,6 +14,7 @@
 	def_bool y
 	select GENERIC_FIND_FIRST_BIT
 	select GENERIC_KERNEL_THREAD
+	select GENERIC_KERNEL_EXECVE
 
 config 64BIT
 	bool "64-bit kernel" if SUBARCH = "x86"
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index 885eff4..4df6c37 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -80,7 +80,7 @@
 }
 
 
-notrace static inline long vgetns(void)
+notrace static inline u64 vgetsns(void)
 {
 	long v;
 	cycles_t cycles;
@@ -91,21 +91,24 @@
 	else
 		return 0;
 	v = (cycles - gtod->clock.cycle_last) & gtod->clock.mask;
-	return (v * gtod->clock.mult) >> gtod->clock.shift;
+	return v * gtod->clock.mult;
 }
 
 /* Code size doesn't matter (vdso is 4k anyway) and this is faster. */
 notrace static int __always_inline do_realtime(struct timespec *ts)
 {
-	unsigned long seq, ns;
+	unsigned long seq;
+	u64 ns;
 	int mode;
 
+	ts->tv_nsec = 0;
 	do {
 		seq = read_seqcount_begin(&gtod->seq);
 		mode = gtod->clock.vclock_mode;
 		ts->tv_sec = gtod->wall_time_sec;
-		ts->tv_nsec = gtod->wall_time_nsec;
-		ns = vgetns();
+		ns = gtod->wall_time_snsec;
+		ns += vgetsns();
+		ns >>= gtod->clock.shift;
 	} while (unlikely(read_seqcount_retry(&gtod->seq, seq)));
 
 	timespec_add_ns(ts, ns);
@@ -114,15 +117,18 @@
 
 notrace static int do_monotonic(struct timespec *ts)
 {
-	unsigned long seq, ns;
+	unsigned long seq;
+	u64 ns;
 	int mode;
 
+	ts->tv_nsec = 0;
 	do {
 		seq = read_seqcount_begin(&gtod->seq);
 		mode = gtod->clock.vclock_mode;
 		ts->tv_sec = gtod->monotonic_time_sec;
-		ts->tv_nsec = gtod->monotonic_time_nsec;
-		ns = vgetns();
+		ns = gtod->monotonic_time_snsec;
+		ns += vgetsns();
+		ns >>= gtod->clock.shift;
 	} while (unlikely(read_seqcount_retry(&gtod->seq, seq)));
 	timespec_add_ns(ts, ns);
 
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index bf788d3..e3497f2 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -987,7 +987,16 @@
 
 	native_write_cr4(cr4);
 }
-
+#ifdef CONFIG_X86_64
+static inline unsigned long xen_read_cr8(void)
+{
+	return 0;
+}
+static inline void xen_write_cr8(unsigned long val)
+{
+	BUG_ON(val);
+}
+#endif
 static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
 {
 	int ret;
@@ -1156,6 +1165,11 @@
 	.read_cr4_safe = native_read_cr4_safe,
 	.write_cr4 = xen_write_cr4,
 
+#ifdef CONFIG_X86_64
+	.read_cr8 = xen_read_cr8,
+	.write_cr8 = xen_write_cr8,
+#endif
+
 	.wbinvd = native_wbinvd,
 
 	.read_msr = native_read_msr_safe,
@@ -1164,6 +1178,8 @@
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
 
+	.read_tscp = native_read_tscp,
+
 	.iret = xen_iret,
 	.irq_enable_sysexit = xen_sysexit,
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index fd28d86..6226c99 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -47,6 +47,7 @@
 #include <linux/gfp.h>
 #include <linux/memblock.h>
 #include <linux/seq_file.h>
+#include <linux/crash_dump.h>
 
 #include <trace/events/xen.h>
 
@@ -2381,6 +2382,43 @@
 EXPORT_SYMBOL_GPL(xen_destroy_contiguous_region);
 
 #ifdef CONFIG_XEN_PVHVM
+#ifdef CONFIG_PROC_VMCORE
+/*
+ * This function is used in two contexts:
+ * - the kdump kernel has to check whether a pfn of the crashed kernel
+ *   was a ballooned page. vmcore is using this function to decide
+ *   whether to access a pfn of the crashed kernel.
+ * - the kexec kernel has to check whether a pfn was ballooned by the
+ *   previous kernel. If the pfn is ballooned, handle it properly.
+ * Returns 0 if the pfn is not backed by a RAM page, the caller may
+ * handle the pfn special in this case.
+ */
+static int xen_oldmem_pfn_is_ram(unsigned long pfn)
+{
+	struct xen_hvm_get_mem_type a = {
+		.domid = DOMID_SELF,
+		.pfn = pfn,
+	};
+	int ram;
+
+	if (HYPERVISOR_hvm_op(HVMOP_get_mem_type, &a))
+		return -ENXIO;
+
+	switch (a.mem_type) {
+		case HVMMEM_mmio_dm:
+			ram = 0;
+			break;
+		case HVMMEM_ram_rw:
+		case HVMMEM_ram_ro:
+		default:
+			ram = 1;
+			break;
+	}
+
+	return ram;
+}
+#endif
+
 static void xen_hvm_exit_mmap(struct mm_struct *mm)
 {
 	struct xen_hvm_pagetable_dying a;
@@ -2411,6 +2449,9 @@
 {
 	if (is_pagetable_dying_supported())
 		pv_mmu_ops.exit_mmap = xen_hvm_exit_mmap;
+#ifdef CONFIG_PROC_VMCORE
+	register_oldmem_pfn_is_ram(&xen_oldmem_pfn_is_ram);
+#endif
 }
 #endif
 
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index bc44311..bc02082 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -328,13 +328,13 @@
                    struct pt_regs *regs)
 {
 	long error;
-	char * filename;
+	struct filename *filename;
 
 	filename = getname(name);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
 		goto out;
-	error = do_execve(filename, argv, envp, regs);
+	error = do_execve(filename->name, argv, envp, regs);
 	putname(filename);
 out:
 	return error;
diff --git a/crypto/xor.c b/crypto/xor.c
index 65c7b41..35d6b3a 100644
--- a/crypto/xor.c
+++ b/crypto/xor.c
@@ -56,11 +56,11 @@
 EXPORT_SYMBOL(xor_blocks);
 
 /* Set of all registered templates.  */
-static struct xor_block_template *template_list;
+static struct xor_block_template *__initdata template_list;
 
 #define BENCH_SIZE (PAGE_SIZE)
 
-static void
+static void __init
 do_xor_speed(struct xor_block_template *tmpl, void *b1, void *b2)
 {
 	int speed;
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 7edaccc..a51df96 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -71,9 +71,6 @@
 #define ACPI_EC_UDELAY_GLK	1000	/* Wait 1ms max. to get global lock */
 #define ACPI_EC_MSI_UDELAY	550	/* Wait 550us for MSI EC */
 
-#define ACPI_EC_STORM_THRESHOLD 8	/* number of false interrupts
-					   per one transaction */
-
 enum {
 	EC_FLAGS_QUERY_PENDING,		/* Query is pending */
 	EC_FLAGS_GPE_STORM,		/* GPE storm detected */
@@ -87,6 +84,15 @@
 module_param(ec_delay, uint, 0644);
 MODULE_PARM_DESC(ec_delay, "Timeout(ms) waited until an EC command completes");
 
+/*
+ * If the number of false interrupts per one transaction exceeds
+ * this threshold, will think there is a GPE storm happened and
+ * will disable the GPE for normal transaction.
+ */
+static unsigned int ec_storm_threshold  __read_mostly = 8;
+module_param(ec_storm_threshold, uint, 0644);
+MODULE_PARM_DESC(ec_storm_threshold, "Maxim false GPE numbers not considered as GPE storm");
+
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
 /* External interfaces use first EC only, so remember */
 typedef int (*acpi_ec_query_func) (void *data);
@@ -319,7 +325,7 @@
 		msleep(1);
 		/* It is safe to enable the GPE outside of the transaction. */
 		acpi_enable_gpe(NULL, ec->gpe);
-	} else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
+	} else if (t->irq_count > ec_storm_threshold) {
 		pr_info(PREFIX "GPE storm detected, "
 			"transactions will use polling mode\n");
 		set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
@@ -924,6 +930,17 @@
 	return 0;
 }
 
+/*
+ * Clevo M720 notebook actually works ok with IRQ mode, if we lifted
+ * the GPE storm threshold back to 20
+ */
+static int ec_enlarge_storm_threshold(const struct dmi_system_id *id)
+{
+	pr_debug("Setting the EC GPE storm threshold to 20\n");
+	ec_storm_threshold  = 20;
+	return 0;
+}
+
 static struct dmi_system_id __initdata ec_dmi_table[] = {
 	{
 	ec_skip_dsdt_scan, "Compal JFL92", {
@@ -955,10 +972,13 @@
 	{
 	ec_validate_ecdt, "ASUS hardware", {
 	DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc.") }, NULL},
+	{
+	ec_enlarge_storm_threshold, "CLEVO hardware", {
+	DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
+	DMI_MATCH(DMI_PRODUCT_NAME, "M720T/M730T"),}, NULL},
 	{},
 };
 
-
 int __init acpi_ec_ecdt_probe(void)
 {
 	acpi_status status;
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 3655ab9..e8086c7 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1132,7 +1132,7 @@
 int acpi_processor_hotplug(struct acpi_processor *pr)
 {
 	int ret = 0;
-	struct cpuidle_device *dev = per_cpu(acpi_cpuidle_device, pr->id);
+	struct cpuidle_device *dev;
 
 	if (disabled_by_idle_boot_param())
 		return 0;
@@ -1147,6 +1147,7 @@
 	if (!pr->flags.power_setup_done)
 		return -ENODEV;
 
+	dev = per_cpu(acpi_cpuidle_device, pr->id);
 	cpuidle_pause_and_lock();
 	cpuidle_disable_device(dev);
 	acpi_processor_get_power_info(pr);
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index edda74a..804204d 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -708,6 +708,40 @@
 		return -EINVAL;
 }
 
+static int thermal_get_trend(struct thermal_zone_device *thermal,
+				int trip, enum thermal_trend *trend)
+{
+	struct acpi_thermal *tz = thermal->devdata;
+	enum thermal_trip_type type;
+	int i;
+
+	if (thermal_get_trip_type(thermal, trip, &type))
+		return -EINVAL;
+
+	if (type == THERMAL_TRIP_ACTIVE) {
+		/* aggressive active cooling */
+		*trend = THERMAL_TREND_RAISING;
+		return 0;
+	}
+
+	/*
+	 * tz->temperature has already been updated by generic thermal layer,
+	 * before this callback being invoked
+	 */
+	i = (tz->trips.passive.tc1 * (tz->temperature - tz->last_temperature))
+		+ (tz->trips.passive.tc2
+		* (tz->temperature - tz->trips.passive.temperature));
+
+	if (i > 0)
+		*trend = THERMAL_TREND_RAISING;
+	else if (i < 0)
+		*trend = THERMAL_TREND_DROPPING;
+	else
+		*trend = THERMAL_TREND_STABLE;
+	return 0;
+}
+
+
 static int thermal_notify(struct thermal_zone_device *thermal, int trip,
 			   enum thermal_trip_type trip_type)
 {
@@ -731,11 +765,9 @@
 	return 0;
 }
 
-typedef int (*cb)(struct thermal_zone_device *, int,
-		  struct thermal_cooling_device *);
 static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
 					struct thermal_cooling_device *cdev,
-					cb action)
+					bool bind)
 {
 	struct acpi_device *device = cdev->devdata;
 	struct acpi_thermal *tz = thermal->devdata;
@@ -759,11 +791,19 @@
 		    i++) {
 			handle = tz->trips.passive.devices.handles[i];
 			status = acpi_bus_get_device(handle, &dev);
-			if (ACPI_SUCCESS(status) && (dev == device)) {
-				result = action(thermal, trip, cdev);
-				if (result)
-					goto failed;
-			}
+			if (ACPI_FAILURE(status) || dev != device)
+				continue;
+			if (bind)
+				result =
+					thermal_zone_bind_cooling_device
+					(thermal, trip, cdev,
+					 THERMAL_NO_LIMIT, THERMAL_NO_LIMIT);
+			else
+				result =
+					thermal_zone_unbind_cooling_device
+					(thermal, trip, cdev);
+			if (result)
+				goto failed;
 		}
 	}
 
@@ -776,11 +816,17 @@
 		    j++) {
 			handle = tz->trips.active[i].devices.handles[j];
 			status = acpi_bus_get_device(handle, &dev);
-			if (ACPI_SUCCESS(status) && (dev == device)) {
-				result = action(thermal, trip, cdev);
-				if (result)
-					goto failed;
-			}
+			if (ACPI_FAILURE(status) || dev != device)
+				continue;
+			if (bind)
+				result = thermal_zone_bind_cooling_device
+					(thermal, trip, cdev,
+					 THERMAL_NO_LIMIT, THERMAL_NO_LIMIT);
+			else
+				result = thermal_zone_unbind_cooling_device
+					(thermal, trip, cdev);
+			if (result)
+				goto failed;
 		}
 	}
 
@@ -788,7 +834,14 @@
 		handle = tz->devices.handles[i];
 		status = acpi_bus_get_device(handle, &dev);
 		if (ACPI_SUCCESS(status) && (dev == device)) {
-			result = action(thermal, -1, cdev);
+			if (bind)
+				result = thermal_zone_bind_cooling_device
+						(thermal, -1, cdev,
+						 THERMAL_NO_LIMIT,
+						 THERMAL_NO_LIMIT);
+			else
+				result = thermal_zone_unbind_cooling_device
+						(thermal, -1, cdev);
 			if (result)
 				goto failed;
 		}
@@ -802,16 +855,14 @@
 acpi_thermal_bind_cooling_device(struct thermal_zone_device *thermal,
 					struct thermal_cooling_device *cdev)
 {
-	return acpi_thermal_cooling_device_cb(thermal, cdev,
-				thermal_zone_bind_cooling_device);
+	return acpi_thermal_cooling_device_cb(thermal, cdev, true);
 }
 
 static int
 acpi_thermal_unbind_cooling_device(struct thermal_zone_device *thermal,
 					struct thermal_cooling_device *cdev)
 {
-	return acpi_thermal_cooling_device_cb(thermal, cdev,
-				thermal_zone_unbind_cooling_device);
+	return acpi_thermal_cooling_device_cb(thermal, cdev, false);
 }
 
 static const struct thermal_zone_device_ops acpi_thermal_zone_ops = {
@@ -823,6 +874,7 @@
 	.get_trip_type = thermal_get_trip_type,
 	.get_trip_temp = thermal_get_trip_temp,
 	.get_crit_temp = thermal_get_crit_temp,
+	.get_trend = thermal_get_trend,
 	.notify = thermal_notify,
 };
 
@@ -849,15 +901,12 @@
 		tz->thermal_zone =
 			thermal_zone_device_register("acpitz", trips, 0, tz,
 						     &acpi_thermal_zone_ops,
-						     tz->trips.passive.tc1,
-						     tz->trips.passive.tc2,
 						     tz->trips.passive.tsp*100,
 						     tz->polling_frequency*100);
 	else
 		tz->thermal_zone =
 			thermal_zone_device_register("acpitz", trips, 0, tz,
-						     &acpi_thermal_zone_ops,
-						     0, 0, 0,
+						     &acpi_thermal_zone_ops, 0,
 						     tz->polling_frequency*100);
 	if (IS_ERR(tz->thermal_zone))
 		return -ENODEV;
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index f26afdb..93211df 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -1182,17 +1182,20 @@
 		  size_t size, loff_t *off)
 {
 	struct tpm_chip *chip = file->private_data;
-	size_t in_size = size, out_size;
+	size_t in_size = size;
+	ssize_t out_size;
 
 	/* cannot perform a write until the read has cleared
-	   either via tpm_read or a user_read_timer timeout */
-	while (atomic_read(&chip->data_pending) != 0)
-		msleep(TPM_TIMEOUT);
-
-	mutex_lock(&chip->buffer_mutex);
+	   either via tpm_read or a user_read_timer timeout.
+	   This also prevents splitted buffered writes from blocking here.
+	*/
+	if (atomic_read(&chip->data_pending) != 0)
+		return -EBUSY;
 
 	if (in_size > TPM_BUFSIZE)
-		in_size = TPM_BUFSIZE;
+		return -E2BIG;
+
+	mutex_lock(&chip->buffer_mutex);
 
 	if (copy_from_user
 	    (chip->data_buffer, (void __user *) buf, in_size)) {
@@ -1202,6 +1205,10 @@
 
 	/* atomic tpm command send and result receive */
 	out_size = tpm_transmit(chip, chip->data_buffer, TPM_BUFSIZE);
+	if (out_size < 0) {
+		mutex_unlock(&chip->buffer_mutex);
+		return out_size;
+	}
 
 	atomic_set(&chip->data_pending, out_size);
 	mutex_unlock(&chip->buffer_mutex);
@@ -1259,6 +1266,7 @@
 
 	misc_deregister(&chip->vendor.miscdev);
 	sysfs_remove_group(&dev->kobj, chip->vendor.attr_group);
+	tpm_remove_ppi(&dev->kobj);
 	tpm_bios_log_teardown(chip->bios_dir);
 
 	/* write it this way to be explicit (chip->dev == dev) */
@@ -1476,7 +1484,7 @@
 		goto put_device;
 	}
 
-	if (sys_add_ppi(&dev->kobj)) {
+	if (tpm_add_ppi(&dev->kobj)) {
 		misc_deregister(&chip->vendor.miscdev);
 		goto put_device;
 	}
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 02c266a..8ef7649 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -329,10 +329,15 @@
 			     wait_queue_head_t *);
 
 #ifdef CONFIG_ACPI
-extern ssize_t sys_add_ppi(struct kobject *parent);
+extern int tpm_add_ppi(struct kobject *);
+extern void tpm_remove_ppi(struct kobject *);
 #else
-static inline ssize_t sys_add_ppi(struct kobject *parent)
+static inline int tpm_add_ppi(struct kobject *parent)
 {
 	return 0;
 }
+
+static inline void tpm_remove_ppi(struct kobject *parent)
+{
+}
 #endif
diff --git a/drivers/char/tpm/tpm_ppi.c b/drivers/char/tpm/tpm_ppi.c
index f27b58c..720ebcf 100644
--- a/drivers/char/tpm/tpm_ppi.c
+++ b/drivers/char/tpm/tpm_ppi.c
@@ -444,18 +444,20 @@
 	&dev_attr_vs_operations.attr, NULL,
 };
 static struct attribute_group ppi_attr_grp = {
+	.name = "ppi",
 	.attrs = ppi_attrs
 };
 
-ssize_t sys_add_ppi(struct kobject *parent)
+int tpm_add_ppi(struct kobject *parent)
 {
-	struct kobject *ppi;
-	ppi = kobject_create_and_add("ppi", parent);
-	if (sysfs_create_group(ppi, &ppi_attr_grp))
-		return -EFAULT;
-	else
-		return 0;
+	return sysfs_create_group(parent, &ppi_attr_grp);
 }
-EXPORT_SYMBOL_GPL(sys_add_ppi);
+EXPORT_SYMBOL_GPL(tpm_add_ppi);
+
+void tpm_remove_ppi(struct kobject *parent)
+{
+	sysfs_remove_group(parent, &ppi_attr_grp);
+}
+EXPORT_SYMBOL_GPL(tpm_remove_ppi);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index e28f6ea..7f15b85 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -368,7 +368,7 @@
  */
 void cpuidle_disable_device(struct cpuidle_device *dev)
 {
-	if (!dev->enabled)
+	if (!dev || !dev->enabled)
 		return;
 	if (!cpuidle_get_driver() || !cpuidle_curr_governor)
 		return;
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index c74e73b..c4633de 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -334,16 +334,6 @@
 	  This driver can also be built as module. If so, the module
 	  will be called da9052-hwmon.
 
-config SENSORS_EXYNOS4_TMU
-	tristate "Temperature sensor on Samsung EXYNOS4"
-	depends on ARCH_EXYNOS4
-	help
-	  If you say yes here you get support for TMU (Thermal Management
-	  Unit) on SAMSUNG EXYNOS4 series of SoC.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called exynos4-tmu.
-
 config SENSORS_I5K_AMB
 	tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 	depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index a62ce17..8d5fcb5 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -50,7 +50,6 @@
 obj-$(CONFIG_SENSORS_EMC1403)	+= emc1403.o
 obj-$(CONFIG_SENSORS_EMC2103)	+= emc2103.o
 obj-$(CONFIG_SENSORS_EMC6W201)	+= emc6w201.o
-obj-$(CONFIG_SENSORS_EXYNOS4_TMU)	+= exynos4_tmu.o
 obj-$(CONFIG_SENSORS_F71805F)	+= f71805f.o
 obj-$(CONFIG_SENSORS_F71882FG)	+= f71882fg.o
 obj-$(CONFIG_SENSORS_F75375S)	+= f75375s.o
diff --git a/drivers/hwmon/exynos4_tmu.c b/drivers/hwmon/exynos4_tmu.c
deleted file mode 100644
index e912059..0000000
--- a/drivers/hwmon/exynos4_tmu.c
+++ /dev/null
@@ -1,518 +0,0 @@
-/*
- * exynos4_tmu.c - Samsung EXYNOS4 TMU (Thermal Management Unit)
- *
- *  Copyright (C) 2011 Samsung Electronics
- *  Donggeun Kim <dg77.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/workqueue.h>
-#include <linux/sysfs.h>
-#include <linux/kobject.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-
-#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
-
-#include <linux/platform_data/exynos4_tmu.h>
-
-#define EXYNOS4_TMU_REG_TRIMINFO	0x0
-#define EXYNOS4_TMU_REG_CONTROL		0x20
-#define EXYNOS4_TMU_REG_STATUS		0x28
-#define EXYNOS4_TMU_REG_CURRENT_TEMP	0x40
-#define EXYNOS4_TMU_REG_THRESHOLD_TEMP	0x44
-#define EXYNOS4_TMU_REG_TRIG_LEVEL0	0x50
-#define EXYNOS4_TMU_REG_TRIG_LEVEL1	0x54
-#define EXYNOS4_TMU_REG_TRIG_LEVEL2	0x58
-#define EXYNOS4_TMU_REG_TRIG_LEVEL3	0x5C
-#define EXYNOS4_TMU_REG_PAST_TEMP0	0x60
-#define EXYNOS4_TMU_REG_PAST_TEMP1	0x64
-#define EXYNOS4_TMU_REG_PAST_TEMP2	0x68
-#define EXYNOS4_TMU_REG_PAST_TEMP3	0x6C
-#define EXYNOS4_TMU_REG_INTEN		0x70
-#define EXYNOS4_TMU_REG_INTSTAT		0x74
-#define EXYNOS4_TMU_REG_INTCLEAR	0x78
-
-#define EXYNOS4_TMU_GAIN_SHIFT		8
-#define EXYNOS4_TMU_REF_VOLTAGE_SHIFT	24
-
-#define EXYNOS4_TMU_TRIM_TEMP_MASK	0xff
-#define EXYNOS4_TMU_CORE_ON	3
-#define EXYNOS4_TMU_CORE_OFF	2
-#define EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET	50
-#define EXYNOS4_TMU_TRIG_LEVEL0_MASK	0x1
-#define EXYNOS4_TMU_TRIG_LEVEL1_MASK	0x10
-#define EXYNOS4_TMU_TRIG_LEVEL2_MASK	0x100
-#define EXYNOS4_TMU_TRIG_LEVEL3_MASK	0x1000
-#define EXYNOS4_TMU_INTCLEAR_VAL	0x1111
-
-struct exynos4_tmu_data {
-	struct exynos4_tmu_platform_data *pdata;
-	struct device *hwmon_dev;
-	struct resource *mem;
-	void __iomem *base;
-	int irq;
-	struct work_struct irq_work;
-	struct mutex lock;
-	struct clk *clk;
-	u8 temp_error1, temp_error2;
-};
-
-/*
- * TMU treats temperature as a mapped temperature code.
- * The temperature is converted differently depending on the calibration type.
- */
-static int temp_to_code(struct exynos4_tmu_data *data, u8 temp)
-{
-	struct exynos4_tmu_platform_data *pdata = data->pdata;
-	int temp_code;
-
-	/* temp should range between 25 and 125 */
-	if (temp < 25 || temp > 125) {
-		temp_code = -EINVAL;
-		goto out;
-	}
-
-	switch (pdata->cal_type) {
-	case TYPE_TWO_POINT_TRIMMING:
-		temp_code = (temp - 25) *
-		    (data->temp_error2 - data->temp_error1) /
-		    (85 - 25) + data->temp_error1;
-		break;
-	case TYPE_ONE_POINT_TRIMMING:
-		temp_code = temp + data->temp_error1 - 25;
-		break;
-	default:
-		temp_code = temp + EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET;
-		break;
-	}
-out:
-	return temp_code;
-}
-
-/*
- * Calculate a temperature value from a temperature code.
- * The unit of the temperature is degree Celsius.
- */
-static int code_to_temp(struct exynos4_tmu_data *data, u8 temp_code)
-{
-	struct exynos4_tmu_platform_data *pdata = data->pdata;
-	int temp;
-
-	/* temp_code should range between 75 and 175 */
-	if (temp_code < 75 || temp_code > 175) {
-		temp = -ENODATA;
-		goto out;
-	}
-
-	switch (pdata->cal_type) {
-	case TYPE_TWO_POINT_TRIMMING:
-		temp = (temp_code - data->temp_error1) * (85 - 25) /
-		    (data->temp_error2 - data->temp_error1) + 25;
-		break;
-	case TYPE_ONE_POINT_TRIMMING:
-		temp = temp_code - data->temp_error1 + 25;
-		break;
-	default:
-		temp = temp_code - EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET;
-		break;
-	}
-out:
-	return temp;
-}
-
-static int exynos4_tmu_initialize(struct platform_device *pdev)
-{
-	struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
-	struct exynos4_tmu_platform_data *pdata = data->pdata;
-	unsigned int status, trim_info;
-	int ret = 0, threshold_code;
-
-	mutex_lock(&data->lock);
-	clk_enable(data->clk);
-
-	status = readb(data->base + EXYNOS4_TMU_REG_STATUS);
-	if (!status) {
-		ret = -EBUSY;
-		goto out;
-	}
-
-	/* Save trimming info in order to perform calibration */
-	trim_info = readl(data->base + EXYNOS4_TMU_REG_TRIMINFO);
-	data->temp_error1 = trim_info & EXYNOS4_TMU_TRIM_TEMP_MASK;
-	data->temp_error2 = ((trim_info >> 8) & EXYNOS4_TMU_TRIM_TEMP_MASK);
-
-	/* Write temperature code for threshold */
-	threshold_code = temp_to_code(data, pdata->threshold);
-	if (threshold_code < 0) {
-		ret = threshold_code;
-		goto out;
-	}
-	writeb(threshold_code,
-		data->base + EXYNOS4_TMU_REG_THRESHOLD_TEMP);
-
-	writeb(pdata->trigger_levels[0],
-		data->base + EXYNOS4_TMU_REG_TRIG_LEVEL0);
-	writeb(pdata->trigger_levels[1],
-		data->base + EXYNOS4_TMU_REG_TRIG_LEVEL1);
-	writeb(pdata->trigger_levels[2],
-		data->base + EXYNOS4_TMU_REG_TRIG_LEVEL2);
-	writeb(pdata->trigger_levels[3],
-		data->base + EXYNOS4_TMU_REG_TRIG_LEVEL3);
-
-	writel(EXYNOS4_TMU_INTCLEAR_VAL,
-		data->base + EXYNOS4_TMU_REG_INTCLEAR);
-out:
-	clk_disable(data->clk);
-	mutex_unlock(&data->lock);
-
-	return ret;
-}
-
-static void exynos4_tmu_control(struct platform_device *pdev, bool on)
-{
-	struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
-	struct exynos4_tmu_platform_data *pdata = data->pdata;
-	unsigned int con, interrupt_en;
-
-	mutex_lock(&data->lock);
-	clk_enable(data->clk);
-
-	con = pdata->reference_voltage << EXYNOS4_TMU_REF_VOLTAGE_SHIFT |
-		pdata->gain << EXYNOS4_TMU_GAIN_SHIFT;
-	if (on) {
-		con |= EXYNOS4_TMU_CORE_ON;
-		interrupt_en = pdata->trigger_level3_en << 12 |
-			pdata->trigger_level2_en << 8 |
-			pdata->trigger_level1_en << 4 |
-			pdata->trigger_level0_en;
-	} else {
-		con |= EXYNOS4_TMU_CORE_OFF;
-		interrupt_en = 0; /* Disable all interrupts */
-	}
-	writel(interrupt_en, data->base + EXYNOS4_TMU_REG_INTEN);
-	writel(con, data->base + EXYNOS4_TMU_REG_CONTROL);
-
-	clk_disable(data->clk);
-	mutex_unlock(&data->lock);
-}
-
-static int exynos4_tmu_read(struct exynos4_tmu_data *data)
-{
-	u8 temp_code;
-	int temp;
-
-	mutex_lock(&data->lock);
-	clk_enable(data->clk);
-
-	temp_code = readb(data->base + EXYNOS4_TMU_REG_CURRENT_TEMP);
-	temp = code_to_temp(data, temp_code);
-
-	clk_disable(data->clk);
-	mutex_unlock(&data->lock);
-
-	return temp;
-}
-
-static void exynos4_tmu_work(struct work_struct *work)
-{
-	struct exynos4_tmu_data *data = container_of(work,
-			struct exynos4_tmu_data, irq_work);
-
-	mutex_lock(&data->lock);
-	clk_enable(data->clk);
-
-	writel(EXYNOS4_TMU_INTCLEAR_VAL, data->base + EXYNOS4_TMU_REG_INTCLEAR);
-
-	kobject_uevent(&data->hwmon_dev->kobj, KOBJ_CHANGE);
-
-	enable_irq(data->irq);
-
-	clk_disable(data->clk);
-	mutex_unlock(&data->lock);
-}
-
-static irqreturn_t exynos4_tmu_irq(int irq, void *id)
-{
-	struct exynos4_tmu_data *data = id;
-
-	disable_irq_nosync(irq);
-	schedule_work(&data->irq_work);
-
-	return IRQ_HANDLED;
-}
-
-static ssize_t exynos4_tmu_show_name(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	return sprintf(buf, "exynos4-tmu\n");
-}
-
-static ssize_t exynos4_tmu_show_temp(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct exynos4_tmu_data *data = dev_get_drvdata(dev);
-	int ret;
-
-	ret = exynos4_tmu_read(data);
-	if (ret < 0)
-		return ret;
-
-	/* convert from degree Celsius to millidegree Celsius */
-	return sprintf(buf, "%d\n", ret * 1000);
-}
-
-static ssize_t exynos4_tmu_show_alarm(struct device *dev,
-		struct device_attribute *devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct exynos4_tmu_data *data = dev_get_drvdata(dev);
-	struct exynos4_tmu_platform_data *pdata = data->pdata;
-	int temp;
-	unsigned int trigger_level;
-
-	temp = exynos4_tmu_read(data);
-	if (temp < 0)
-		return temp;
-
-	trigger_level = pdata->threshold + pdata->trigger_levels[attr->index];
-
-	return sprintf(buf, "%d\n", !!(temp > trigger_level));
-}
-
-static ssize_t exynos4_tmu_show_level(struct device *dev,
-		struct device_attribute *devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct exynos4_tmu_data *data = dev_get_drvdata(dev);
-	struct exynos4_tmu_platform_data *pdata = data->pdata;
-	unsigned int temp = pdata->threshold +
-			pdata->trigger_levels[attr->index];
-
-	return sprintf(buf, "%u\n", temp * 1000);
-}
-
-static DEVICE_ATTR(name, S_IRUGO, exynos4_tmu_show_name, NULL);
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, exynos4_tmu_show_temp, NULL, 0);
-
-static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
-		exynos4_tmu_show_alarm, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
-		exynos4_tmu_show_alarm, NULL, 2);
-static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO,
-		exynos4_tmu_show_alarm, NULL, 3);
-
-static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, exynos4_tmu_show_level, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, exynos4_tmu_show_level, NULL, 2);
-static SENSOR_DEVICE_ATTR(temp1_emergency, S_IRUGO,
-		exynos4_tmu_show_level, NULL, 3);
-
-static struct attribute *exynos4_tmu_attributes[] = {
-	&dev_attr_name.attr,
-	&sensor_dev_attr_temp1_input.dev_attr.attr,
-	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr,
-	&sensor_dev_attr_temp1_max.dev_attr.attr,
-	&sensor_dev_attr_temp1_crit.dev_attr.attr,
-	&sensor_dev_attr_temp1_emergency.dev_attr.attr,
-	NULL,
-};
-
-static const struct attribute_group exynos4_tmu_attr_group = {
-	.attrs = exynos4_tmu_attributes,
-};
-
-static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
-{
-	struct exynos4_tmu_data *data;
-	struct exynos4_tmu_platform_data *pdata = pdev->dev.platform_data;
-	int ret;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "No platform init data supplied.\n");
-		return -ENODEV;
-	}
-
-	data = kzalloc(sizeof(struct exynos4_tmu_data), GFP_KERNEL);
-	if (!data) {
-		dev_err(&pdev->dev, "Failed to allocate driver structure\n");
-		return -ENOMEM;
-	}
-
-	data->irq = platform_get_irq(pdev, 0);
-	if (data->irq < 0) {
-		ret = data->irq;
-		dev_err(&pdev->dev, "Failed to get platform irq\n");
-		goto err_free;
-	}
-
-	INIT_WORK(&data->irq_work, exynos4_tmu_work);
-
-	data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!data->mem) {
-		ret = -ENOENT;
-		dev_err(&pdev->dev, "Failed to get platform resource\n");
-		goto err_free;
-	}
-
-	data->mem = request_mem_region(data->mem->start,
-			resource_size(data->mem), pdev->name);
-	if (!data->mem) {
-		ret = -ENODEV;
-		dev_err(&pdev->dev, "Failed to request memory region\n");
-		goto err_free;
-	}
-
-	data->base = ioremap(data->mem->start, resource_size(data->mem));
-	if (!data->base) {
-		ret = -ENODEV;
-		dev_err(&pdev->dev, "Failed to ioremap memory\n");
-		goto err_mem_region;
-	}
-
-	ret = request_irq(data->irq, exynos4_tmu_irq,
-		IRQF_TRIGGER_RISING,
-		"exynos4-tmu", data);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
-		goto err_io_remap;
-	}
-
-	data->clk = clk_get(NULL, "tmu_apbif");
-	if (IS_ERR(data->clk)) {
-		ret = PTR_ERR(data->clk);
-		dev_err(&pdev->dev, "Failed to get clock\n");
-		goto err_irq;
-	}
-
-	data->pdata = pdata;
-	platform_set_drvdata(pdev, data);
-	mutex_init(&data->lock);
-
-	ret = exynos4_tmu_initialize(pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to initialize TMU\n");
-		goto err_clk;
-	}
-
-	ret = sysfs_create_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to create sysfs group\n");
-		goto err_clk;
-	}
-
-	data->hwmon_dev = hwmon_device_register(&pdev->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		ret = PTR_ERR(data->hwmon_dev);
-		dev_err(&pdev->dev, "Failed to register hwmon device\n");
-		goto err_create_group;
-	}
-
-	exynos4_tmu_control(pdev, true);
-
-	return 0;
-
-err_create_group:
-	sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
-err_clk:
-	platform_set_drvdata(pdev, NULL);
-	clk_put(data->clk);
-err_irq:
-	free_irq(data->irq, data);
-err_io_remap:
-	iounmap(data->base);
-err_mem_region:
-	release_mem_region(data->mem->start, resource_size(data->mem));
-err_free:
-	kfree(data);
-
-	return ret;
-}
-
-static int __devexit exynos4_tmu_remove(struct platform_device *pdev)
-{
-	struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
-
-	exynos4_tmu_control(pdev, false);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
-
-	clk_put(data->clk);
-
-	free_irq(data->irq, data);
-
-	iounmap(data->base);
-	release_mem_region(data->mem->start, resource_size(data->mem));
-
-	platform_set_drvdata(pdev, NULL);
-
-	kfree(data);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4_tmu_suspend(struct device *dev)
-{
-	exynos4_tmu_control(to_platform_device(dev), false);
-
-	return 0;
-}
-
-static int exynos4_tmu_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	exynos4_tmu_initialize(pdev);
-	exynos4_tmu_control(pdev, true);
-
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(exynos4_tmu_pm,
-			 exynos4_tmu_suspend, exynos4_tmu_resume);
-#define EXYNOS4_TMU_PM	&exynos4_tmu_pm
-#else
-#define EXYNOS4_TMU_PM	NULL
-#endif
-
-static struct platform_driver exynos4_tmu_driver = {
-	.driver = {
-		.name   = "exynos4-tmu",
-		.owner  = THIS_MODULE,
-		.pm     = EXYNOS4_TMU_PM,
-	},
-	.probe = exynos4_tmu_probe,
-	.remove	= __devexit_p(exynos4_tmu_remove),
-};
-
-module_platform_driver(exynos4_tmu_driver);
-
-MODULE_DESCRIPTION("EXYNOS4 TMU Driver");
-MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:exynos4-tmu");
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 118d030..6ae2ac4 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -23,11 +23,11 @@
 #include <linux/input/mt.h>
 #include <linux/major.h>
 #include <linux/device.h>
+#include <linux/cdev.h>
 #include "input-compat.h"
 
 struct evdev {
 	int open;
-	int minor;
 	struct input_handle handle;
 	wait_queue_head_t wait;
 	struct evdev_client __rcu *grab;
@@ -35,6 +35,7 @@
 	spinlock_t client_lock; /* protects client_list */
 	struct mutex mutex;
 	struct device dev;
+	struct cdev cdev;
 	bool exist;
 };
 
@@ -51,9 +52,6 @@
 	struct input_event buffer[];
 };
 
-static struct evdev *evdev_table[EVDEV_MINORS];
-static DEFINE_MUTEX(evdev_table_mutex);
-
 static void __pass_event(struct evdev_client *client,
 			 const struct input_event *event)
 {
@@ -310,35 +308,16 @@
 
 static int evdev_open(struct inode *inode, struct file *file)
 {
-	struct evdev *evdev;
+	struct evdev *evdev = container_of(inode->i_cdev, struct evdev, cdev);
+	unsigned int bufsize = evdev_compute_buffer_size(evdev->handle.dev);
 	struct evdev_client *client;
-	int i = iminor(inode) - EVDEV_MINOR_BASE;
-	unsigned int bufsize;
 	int error;
 
-	if (i >= EVDEV_MINORS)
-		return -ENODEV;
-
-	error = mutex_lock_interruptible(&evdev_table_mutex);
-	if (error)
-		return error;
-	evdev = evdev_table[i];
-	if (evdev)
-		get_device(&evdev->dev);
-	mutex_unlock(&evdev_table_mutex);
-
-	if (!evdev)
-		return -ENODEV;
-
-	bufsize = evdev_compute_buffer_size(evdev->handle.dev);
-
 	client = kzalloc(sizeof(struct evdev_client) +
 				bufsize * sizeof(struct input_event),
 			 GFP_KERNEL);
-	if (!client) {
-		error = -ENOMEM;
-		goto err_put_evdev;
-	}
+	if (!client)
+		return -ENOMEM;
 
 	client->bufsize = bufsize;
 	spin_lock_init(&client->buffer_lock);
@@ -352,13 +331,12 @@
 	file->private_data = client;
 	nonseekable_open(inode, file);
 
+	get_device(&evdev->dev);
 	return 0;
 
  err_free_client:
 	evdev_detach_client(evdev, client);
 	kfree(client);
- err_put_evdev:
-	put_device(&evdev->dev);
 	return error;
 }
 
@@ -942,26 +920,6 @@
 	.llseek		= no_llseek,
 };
 
-static int evdev_install_chrdev(struct evdev *evdev)
-{
-	/*
-	 * No need to do any locking here as calls to connect and
-	 * disconnect are serialized by the input core
-	 */
-	evdev_table[evdev->minor] = evdev;
-	return 0;
-}
-
-static void evdev_remove_chrdev(struct evdev *evdev)
-{
-	/*
-	 * Lock evdev table to prevent race with evdev_open()
-	 */
-	mutex_lock(&evdev_table_mutex);
-	evdev_table[evdev->minor] = NULL;
-	mutex_unlock(&evdev_table_mutex);
-}
-
 /*
  * Mark device non-existent. This disables writes, ioctls and
  * prevents new users from opening the device. Already posted
@@ -980,7 +938,8 @@
 
 	evdev_mark_dead(evdev);
 	evdev_hangup(evdev);
-	evdev_remove_chrdev(evdev);
+
+	cdev_del(&evdev->cdev);
 
 	/* evdev is marked dead so no one else accesses evdev->open */
 	if (evdev->open) {
@@ -991,43 +950,47 @@
 
 /*
  * Create new evdev device. Note that input core serializes calls
- * to connect and disconnect so we don't need to lock evdev_table here.
+ * to connect and disconnect.
  */
 static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
 			 const struct input_device_id *id)
 {
 	struct evdev *evdev;
 	int minor;
+	int dev_no;
 	int error;
 
-	for (minor = 0; minor < EVDEV_MINORS; minor++)
-		if (!evdev_table[minor])
-			break;
-
-	if (minor == EVDEV_MINORS) {
-		pr_err("no more free evdev devices\n");
-		return -ENFILE;
+	minor = input_get_new_minor(EVDEV_MINOR_BASE, EVDEV_MINORS, true);
+	if (minor < 0) {
+		error = minor;
+		pr_err("failed to reserve new minor: %d\n", error);
+		return error;
 	}
 
 	evdev = kzalloc(sizeof(struct evdev), GFP_KERNEL);
-	if (!evdev)
-		return -ENOMEM;
+	if (!evdev) {
+		error = -ENOMEM;
+		goto err_free_minor;
+	}
 
 	INIT_LIST_HEAD(&evdev->client_list);
 	spin_lock_init(&evdev->client_lock);
 	mutex_init(&evdev->mutex);
 	init_waitqueue_head(&evdev->wait);
-
-	dev_set_name(&evdev->dev, "event%d", minor);
 	evdev->exist = true;
-	evdev->minor = minor;
+
+	dev_no = minor;
+	/* Normalize device number if it falls into legacy range */
+	if (dev_no < EVDEV_MINOR_BASE + EVDEV_MINORS)
+		dev_no -= EVDEV_MINOR_BASE;
+	dev_set_name(&evdev->dev, "event%d", dev_no);
 
 	evdev->handle.dev = input_get_device(dev);
 	evdev->handle.name = dev_name(&evdev->dev);
 	evdev->handle.handler = handler;
 	evdev->handle.private = evdev;
 
-	evdev->dev.devt = MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor);
+	evdev->dev.devt = MKDEV(INPUT_MAJOR, minor);
 	evdev->dev.class = &input_class;
 	evdev->dev.parent = &dev->dev;
 	evdev->dev.release = evdev_free;
@@ -1037,7 +1000,8 @@
 	if (error)
 		goto err_free_evdev;
 
-	error = evdev_install_chrdev(evdev);
+	cdev_init(&evdev->cdev, &evdev_fops);
+	error = cdev_add(&evdev->cdev, evdev->dev.devt, 1);
 	if (error)
 		goto err_unregister_handle;
 
@@ -1053,6 +1017,8 @@
 	input_unregister_handle(&evdev->handle);
  err_free_evdev:
 	put_device(&evdev->dev);
+ err_free_minor:
+	input_free_minor(minor);
 	return error;
 }
 
@@ -1062,6 +1028,7 @@
 
 	device_del(&evdev->dev);
 	evdev_cleanup(evdev);
+	input_free_minor(MINOR(evdev->dev.devt));
 	input_unregister_handle(handle);
 	put_device(&evdev->dev);
 }
@@ -1078,7 +1045,7 @@
 	.events		= evdev_events,
 	.connect	= evdev_connect,
 	.disconnect	= evdev_disconnect,
-	.fops		= &evdev_fops,
+	.legacy_minors	= true,
 	.minor		= EVDEV_MINOR_BASE,
 	.name		= "evdev",
 	.id_table	= evdev_ids,
diff --git a/drivers/input/input.c b/drivers/input/input.c
index ace3f7c..53a0dde 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -14,6 +14,7 @@
 
 #include <linux/init.h>
 #include <linux/types.h>
+#include <linux/idr.h>
 #include <linux/input/mt.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -32,7 +33,9 @@
 MODULE_DESCRIPTION("Input core");
 MODULE_LICENSE("GPL");
 
-#define INPUT_DEVICES	256
+#define INPUT_MAX_CHAR_DEVICES		1024
+#define INPUT_FIRST_DYNAMIC_DEV		256
+static DEFINE_IDA(input_ida);
 
 static LIST_HEAD(input_dev_list);
 static LIST_HEAD(input_handler_list);
@@ -45,8 +48,6 @@
  */
 static DEFINE_MUTEX(input_mutex);
 
-static struct input_handler *input_table[8];
-
 static const struct input_value input_value_sync = { EV_SYN, SYN_REPORT, 1 };
 
 static inline int is_event_supported(unsigned int code,
@@ -1218,7 +1219,7 @@
 	seq_printf(seq, "N: Number=%u Name=%s", state->pos, handler->name);
 	if (handler->filter)
 		seq_puts(seq, " (filter)");
-	if (handler->fops)
+	if (handler->legacy_minors)
 		seq_printf(seq, " Minor=%d", handler->minor);
 	seq_putc(seq, '\n');
 
@@ -2016,22 +2017,14 @@
 int input_register_handler(struct input_handler *handler)
 {
 	struct input_dev *dev;
-	int retval;
+	int error;
 
-	retval = mutex_lock_interruptible(&input_mutex);
-	if (retval)
-		return retval;
+	error = mutex_lock_interruptible(&input_mutex);
+	if (error)
+		return error;
 
 	INIT_LIST_HEAD(&handler->h_list);
 
-	if (handler->fops != NULL) {
-		if (input_table[handler->minor >> 5]) {
-			retval = -EBUSY;
-			goto out;
-		}
-		input_table[handler->minor >> 5] = handler;
-	}
-
 	list_add_tail(&handler->node, &input_handler_list);
 
 	list_for_each_entry(dev, &input_dev_list, node)
@@ -2039,9 +2032,8 @@
 
 	input_wakeup_procfs_readers();
 
- out:
 	mutex_unlock(&input_mutex);
-	return retval;
+	return 0;
 }
 EXPORT_SYMBOL(input_register_handler);
 
@@ -2064,9 +2056,6 @@
 
 	list_del_init(&handler->node);
 
-	if (handler->fops != NULL)
-		input_table[handler->minor >> 5] = NULL;
-
 	input_wakeup_procfs_readers();
 
 	mutex_unlock(&input_mutex);
@@ -2183,51 +2172,52 @@
 }
 EXPORT_SYMBOL(input_unregister_handle);
 
-static int input_open_file(struct inode *inode, struct file *file)
+/**
+ * input_get_new_minor - allocates a new input minor number
+ * @legacy_base: beginning or the legacy range to be searched
+ * @legacy_num: size of legacy range
+ * @allow_dynamic: whether we can also take ID from the dynamic range
+ *
+ * This function allocates a new device minor for from input major namespace.
+ * Caller can request legacy minor by specifying @legacy_base and @legacy_num
+ * parameters and whether ID can be allocated from dynamic range if there are
+ * no free IDs in legacy range.
+ */
+int input_get_new_minor(int legacy_base, unsigned int legacy_num,
+			bool allow_dynamic)
 {
-	struct input_handler *handler;
-	const struct file_operations *old_fops, *new_fops = NULL;
-	int err;
-
-	err = mutex_lock_interruptible(&input_mutex);
-	if (err)
-		return err;
-
-	/* No load-on-demand here? */
-	handler = input_table[iminor(inode) >> 5];
-	if (handler)
-		new_fops = fops_get(handler->fops);
-
-	mutex_unlock(&input_mutex);
-
 	/*
-	 * That's _really_ odd. Usually NULL ->open means "nothing special",
-	 * not "no device". Oh, well...
+	 * This function should be called from input handler's ->connect()
+	 * methods, which are serialized with input_mutex, so no additional
+	 * locking is needed here.
 	 */
-	if (!new_fops || !new_fops->open) {
-		fops_put(new_fops);
-		err = -ENODEV;
-		goto out;
+	if (legacy_base >= 0) {
+		int minor = ida_simple_get(&input_ida,
+					   legacy_base,
+					   legacy_base + legacy_num,
+					   GFP_KERNEL);
+		if (minor >= 0 || !allow_dynamic)
+			return minor;
 	}
 
-	old_fops = file->f_op;
-	file->f_op = new_fops;
-
-	err = new_fops->open(inode, file);
-	if (err) {
-		fops_put(file->f_op);
-		file->f_op = fops_get(old_fops);
-	}
-	fops_put(old_fops);
-out:
-	return err;
+	return ida_simple_get(&input_ida,
+			      INPUT_FIRST_DYNAMIC_DEV, INPUT_MAX_CHAR_DEVICES,
+			      GFP_KERNEL);
 }
+EXPORT_SYMBOL(input_get_new_minor);
 
-static const struct file_operations input_fops = {
-	.owner = THIS_MODULE,
-	.open = input_open_file,
-	.llseek = noop_llseek,
-};
+/**
+ * input_free_minor - release previously allocated minor
+ * @minor: minor to be released
+ *
+ * This function releases previously allocated input minor so that it can be
+ * reused later.
+ */
+void input_free_minor(unsigned int minor)
+{
+	ida_simple_remove(&input_ida, minor);
+}
+EXPORT_SYMBOL(input_free_minor);
 
 static int __init input_init(void)
 {
@@ -2243,7 +2233,8 @@
 	if (err)
 		goto fail1;
 
-	err = register_chrdev(INPUT_MAJOR, "input", &input_fops);
+	err = register_chrdev_region(MKDEV(INPUT_MAJOR, 0),
+				     INPUT_MAX_CHAR_DEVICES, "input");
 	if (err) {
 		pr_err("unable to register char major %d", INPUT_MAJOR);
 		goto fail2;
@@ -2259,7 +2250,8 @@
 static void __exit input_exit(void)
 {
 	input_proc_exit();
-	unregister_chrdev(INPUT_MAJOR, "input");
+	unregister_chrdev_region(MKDEV(INPUT_MAJOR, 0),
+				 INPUT_MAX_CHAR_DEVICES);
 	class_unregister(&input_class);
 }
 
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 78f323e..b62b589 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -27,6 +27,7 @@
 #include <linux/poll.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/cdev.h>
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Joystick device interfaces");
@@ -39,13 +40,13 @@
 
 struct joydev {
 	int open;
-	int minor;
 	struct input_handle handle;
 	wait_queue_head_t wait;
 	struct list_head client_list;
 	spinlock_t client_lock; /* protects client_list */
 	struct mutex mutex;
 	struct device dev;
+	struct cdev cdev;
 	bool exist;
 
 	struct js_corr corr[ABS_CNT];
@@ -70,9 +71,6 @@
 	struct list_head node;
 };
 
-static struct joydev *joydev_table[JOYDEV_MINORS];
-static DEFINE_MUTEX(joydev_table_mutex);
-
 static int joydev_correct(int value, struct js_corr *corr)
 {
 	switch (corr->type) {
@@ -252,30 +250,14 @@
 
 static int joydev_open(struct inode *inode, struct file *file)
 {
+	struct joydev *joydev =
+			container_of(inode->i_cdev, struct joydev, cdev);
 	struct joydev_client *client;
-	struct joydev *joydev;
-	int i = iminor(inode) - JOYDEV_MINOR_BASE;
 	int error;
 
-	if (i >= JOYDEV_MINORS)
-		return -ENODEV;
-
-	error = mutex_lock_interruptible(&joydev_table_mutex);
-	if (error)
-		return error;
-	joydev = joydev_table[i];
-	if (joydev)
-		get_device(&joydev->dev);
-	mutex_unlock(&joydev_table_mutex);
-
-	if (!joydev)
-		return -ENODEV;
-
 	client = kzalloc(sizeof(struct joydev_client), GFP_KERNEL);
-	if (!client) {
-		error = -ENOMEM;
-		goto err_put_joydev;
-	}
+	if (!client)
+		return -ENOMEM;
 
 	spin_lock_init(&client->buffer_lock);
 	client->joydev = joydev;
@@ -288,13 +270,12 @@
 	file->private_data = client;
 	nonseekable_open(inode, file);
 
+	get_device(&joydev->dev);
 	return 0;
 
  err_free_client:
 	joydev_detach_client(joydev, client);
 	kfree(client);
- err_put_joydev:
-	put_device(&joydev->dev);
 	return error;
 }
 
@@ -742,19 +723,6 @@
 	.llseek		= no_llseek,
 };
 
-static int joydev_install_chrdev(struct joydev *joydev)
-{
-	joydev_table[joydev->minor] = joydev;
-	return 0;
-}
-
-static void joydev_remove_chrdev(struct joydev *joydev)
-{
-	mutex_lock(&joydev_table_mutex);
-	joydev_table[joydev->minor] = NULL;
-	mutex_unlock(&joydev_table_mutex);
-}
-
 /*
  * Mark device non-existent. This disables writes, ioctls and
  * prevents new users from opening the device. Already posted
@@ -773,7 +741,8 @@
 
 	joydev_mark_dead(joydev);
 	joydev_hangup(joydev);
-	joydev_remove_chrdev(joydev);
+
+	cdev_del(&joydev->cdev);
 
 	/* joydev is marked dead so no one else accesses joydev->open */
 	if (joydev->open)
@@ -798,30 +767,33 @@
 			  const struct input_device_id *id)
 {
 	struct joydev *joydev;
-	int i, j, t, minor;
+	int i, j, t, minor, dev_no;
 	int error;
 
-	for (minor = 0; minor < JOYDEV_MINORS; minor++)
-		if (!joydev_table[minor])
-			break;
-
-	if (minor == JOYDEV_MINORS) {
-		pr_err("no more free joydev devices\n");
-		return -ENFILE;
+	minor = input_get_new_minor(JOYDEV_MINOR_BASE, JOYDEV_MINORS, true);
+	if (minor < 0) {
+		error = minor;
+		pr_err("failed to reserve new minor: %d\n", error);
+		return error;
 	}
 
 	joydev = kzalloc(sizeof(struct joydev), GFP_KERNEL);
-	if (!joydev)
-		return -ENOMEM;
+	if (!joydev) {
+		error = -ENOMEM;
+		goto err_free_minor;
+	}
 
 	INIT_LIST_HEAD(&joydev->client_list);
 	spin_lock_init(&joydev->client_lock);
 	mutex_init(&joydev->mutex);
 	init_waitqueue_head(&joydev->wait);
-
-	dev_set_name(&joydev->dev, "js%d", minor);
 	joydev->exist = true;
-	joydev->minor = minor;
+
+	dev_no = minor;
+	/* Normalize device number if it falls into legacy range */
+	if (dev_no < JOYDEV_MINOR_BASE + JOYDEV_MINORS)
+		dev_no -= JOYDEV_MINOR_BASE;
+	dev_set_name(&joydev->dev, "js%d", dev_no);
 
 	joydev->handle.dev = input_get_device(dev);
 	joydev->handle.name = dev_name(&joydev->dev);
@@ -875,7 +847,7 @@
 		}
 	}
 
-	joydev->dev.devt = MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor);
+	joydev->dev.devt = MKDEV(INPUT_MAJOR, minor);
 	joydev->dev.class = &input_class;
 	joydev->dev.parent = &dev->dev;
 	joydev->dev.release = joydev_free;
@@ -885,7 +857,8 @@
 	if (error)
 		goto err_free_joydev;
 
-	error = joydev_install_chrdev(joydev);
+	cdev_init(&joydev->cdev, &joydev_fops);
+	error = cdev_add(&joydev->cdev, joydev->dev.devt, 1);
 	if (error)
 		goto err_unregister_handle;
 
@@ -901,6 +874,8 @@
 	input_unregister_handle(&joydev->handle);
  err_free_joydev:
 	put_device(&joydev->dev);
+ err_free_minor:
+	input_free_minor(minor);
 	return error;
 }
 
@@ -910,6 +885,7 @@
 
 	device_del(&joydev->dev);
 	joydev_cleanup(joydev);
+	input_free_minor(MINOR(joydev->dev.devt));
 	input_unregister_handle(handle);
 	put_device(&joydev->dev);
 }
@@ -961,7 +937,7 @@
 	.match		= joydev_match,
 	.connect	= joydev_connect,
 	.disconnect	= joydev_disconnect,
-	.fops		= &joydev_fops,
+	.legacy_minors	= true,
 	.minor		= JOYDEV_MINOR_BASE,
 	.name		= "joydev",
 	.id_table	= joydev_ids,
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index 277e26d..9d7a111 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -431,6 +431,12 @@
 		goto err_unmap_base;
 	}
 
+	error = clk_prepare(keypad->clk);
+	if (error) {
+		dev_err(&pdev->dev, "keypad clock prepare failed\n");
+		goto err_put_clk;
+	}
+
 	keypad->input_dev = input_dev;
 	keypad->pdev = pdev;
 	keypad->row_shift = row_shift;
@@ -461,7 +467,7 @@
 					   keypad->keycodes, input_dev);
 	if (error) {
 		dev_err(&pdev->dev, "failed to build keymap\n");
-		goto err_put_clk;
+		goto err_unprepare_clk;
 	}
 
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
@@ -503,6 +509,8 @@
 	pm_runtime_disable(&pdev->dev);
 	device_init_wakeup(&pdev->dev, 0);
 	platform_set_drvdata(pdev, NULL);
+err_unprepare_clk:
+	clk_unprepare(keypad->clk);
 err_put_clk:
 	clk_put(keypad->clk);
 	samsung_keypad_dt_gpio_free(keypad);
@@ -531,6 +539,7 @@
 	 */
 	free_irq(keypad->irq, keypad);
 
+	clk_unprepare(keypad->clk);
 	clk_put(keypad->clk);
 	samsung_keypad_dt_gpio_free(keypad);
 
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 964e43d..a1b4c37 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -24,10 +24,8 @@
 #include <linux/random.h>
 #include <linux/major.h>
 #include <linux/device.h>
+#include <linux/cdev.h>
 #include <linux/kernel.h>
-#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
-#include <linux/miscdevice.h>
-#endif
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Mouse (ExplorerPS/2) device interfaces");
@@ -61,17 +59,18 @@
 
 struct mousedev {
 	int open;
-	int minor;
 	struct input_handle handle;
 	wait_queue_head_t wait;
 	struct list_head client_list;
 	spinlock_t client_lock; /* protects client_list */
 	struct mutex mutex;
 	struct device dev;
+	struct cdev cdev;
 	bool exist;
+	bool is_mixdev;
 
 	struct list_head mixdev_node;
-	int mixdev_open;
+	bool opened_by_mixdev;
 
 	struct mousedev_hw_data packet;
 	unsigned int pkt_count;
@@ -114,10 +113,6 @@
 static unsigned char mousedev_imps_seq[] = { 0xf3, 200, 0xf3, 100, 0xf3, 80 };
 static unsigned char mousedev_imex_seq[] = { 0xf3, 200, 0xf3, 200, 0xf3, 80 };
 
-static struct input_handler mousedev_handler;
-
-static struct mousedev *mousedev_table[MOUSEDEV_MINORS];
-static DEFINE_MUTEX(mousedev_table_mutex);
 static struct mousedev *mousedev_mix;
 static LIST_HEAD(mousedev_mix_list);
 
@@ -433,7 +428,7 @@
 	if (retval)
 		return retval;
 
-	if (mousedev->minor == MOUSEDEV_MIX)
+	if (mousedev->is_mixdev)
 		mixdev_open_devices();
 	else if (!mousedev->exist)
 		retval = -ENODEV;
@@ -451,7 +446,7 @@
 {
 	mutex_lock(&mousedev->mutex);
 
-	if (mousedev->minor == MOUSEDEV_MIX)
+	if (mousedev->is_mixdev)
 		mixdev_close_devices();
 	else if (mousedev->exist && !--mousedev->open)
 		input_close_device(&mousedev->handle);
@@ -472,11 +467,11 @@
 		return;
 
 	list_for_each_entry(mousedev, &mousedev_mix_list, mixdev_node) {
-		if (!mousedev->mixdev_open) {
+		if (!mousedev->opened_by_mixdev) {
 			if (mousedev_open_device(mousedev))
 				continue;
 
-			mousedev->mixdev_open = 1;
+			mousedev->opened_by_mixdev = true;
 		}
 	}
 }
@@ -494,8 +489,8 @@
 		return;
 
 	list_for_each_entry(mousedev, &mousedev_mix_list, mixdev_node) {
-		if (mousedev->mixdev_open) {
-			mousedev->mixdev_open = 0;
+		if (mousedev->opened_by_mixdev) {
+			mousedev->opened_by_mixdev = false;
 			mousedev_close_device(mousedev);
 		}
 	}
@@ -538,35 +533,17 @@
 	struct mousedev_client *client;
 	struct mousedev *mousedev;
 	int error;
-	int i;
 
 #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
 	if (imajor(inode) == MISC_MAJOR)
-		i = MOUSEDEV_MIX;
+		mousedev = mousedev_mix;
 	else
 #endif
-		i = iminor(inode) - MOUSEDEV_MINOR_BASE;
-
-	if (i >= MOUSEDEV_MINORS)
-		return -ENODEV;
-
-	error = mutex_lock_interruptible(&mousedev_table_mutex);
-	if (error)
-		return error;
-
-	mousedev = mousedev_table[i];
-	if (mousedev)
-		get_device(&mousedev->dev);
-	mutex_unlock(&mousedev_table_mutex);
-
-	if (!mousedev)
-		return -ENODEV;
+		mousedev = container_of(inode->i_cdev, struct mousedev, cdev);
 
 	client = kzalloc(sizeof(struct mousedev_client), GFP_KERNEL);
-	if (!client) {
-		error = -ENOMEM;
-		goto err_put_mousedev;
-	}
+	if (!client)
+		return -ENOMEM;
 
 	spin_lock_init(&client->packet_lock);
 	client->pos_x = xres / 2;
@@ -579,13 +556,14 @@
 		goto err_free_client;
 
 	file->private_data = client;
+	nonseekable_open(inode, file);
+
+	get_device(&mousedev->dev);
 	return 0;
 
  err_free_client:
 	mousedev_detach_client(mousedev, client);
 	kfree(client);
- err_put_mousedev:
-	put_device(&mousedev->dev);
 	return error;
 }
 
@@ -785,29 +763,16 @@
 }
 
 static const struct file_operations mousedev_fops = {
-	.owner =	THIS_MODULE,
-	.read =		mousedev_read,
-	.write =	mousedev_write,
-	.poll =		mousedev_poll,
-	.open =		mousedev_open,
-	.release =	mousedev_release,
-	.fasync =	mousedev_fasync,
-	.llseek = noop_llseek,
+	.owner		= THIS_MODULE,
+	.read		= mousedev_read,
+	.write		= mousedev_write,
+	.poll		= mousedev_poll,
+	.open		= mousedev_open,
+	.release	= mousedev_release,
+	.fasync		= mousedev_fasync,
+	.llseek		= noop_llseek,
 };
 
-static int mousedev_install_chrdev(struct mousedev *mousedev)
-{
-	mousedev_table[mousedev->minor] = mousedev;
-	return 0;
-}
-
-static void mousedev_remove_chrdev(struct mousedev *mousedev)
-{
-	mutex_lock(&mousedev_table_mutex);
-	mousedev_table[mousedev->minor] = NULL;
-	mutex_unlock(&mousedev_table_mutex);
-}
-
 /*
  * Mark device non-existent. This disables writes, ioctls and
  * prevents new users from opening the device. Already posted
@@ -842,24 +807,50 @@
 
 	mousedev_mark_dead(mousedev);
 	mousedev_hangup(mousedev);
-	mousedev_remove_chrdev(mousedev);
+
+	cdev_del(&mousedev->cdev);
 
 	/* mousedev is marked dead so no one else accesses mousedev->open */
 	if (mousedev->open)
 		input_close_device(handle);
 }
 
+static int mousedev_reserve_minor(bool mixdev)
+{
+	int minor;
+
+	if (mixdev) {
+		minor = input_get_new_minor(MOUSEDEV_MIX, 1, false);
+		if (minor < 0)
+			pr_err("failed to reserve mixdev minor: %d\n", minor);
+	} else {
+		minor = input_get_new_minor(MOUSEDEV_MINOR_BASE,
+					    MOUSEDEV_MINORS, true);
+		if (minor < 0)
+			pr_err("failed to reserve new minor: %d\n", minor);
+	}
+
+	return minor;
+}
+
 static struct mousedev *mousedev_create(struct input_dev *dev,
 					struct input_handler *handler,
-					int minor)
+					bool mixdev)
 {
 	struct mousedev *mousedev;
+	int minor;
 	int error;
 
+	minor = mousedev_reserve_minor(mixdev);
+	if (minor < 0) {
+		error = minor;
+		goto err_out;
+	}
+
 	mousedev = kzalloc(sizeof(struct mousedev), GFP_KERNEL);
 	if (!mousedev) {
 		error = -ENOMEM;
-		goto err_out;
+		goto err_free_minor;
 	}
 
 	INIT_LIST_HEAD(&mousedev->client_list);
@@ -867,16 +858,21 @@
 	spin_lock_init(&mousedev->client_lock);
 	mutex_init(&mousedev->mutex);
 	lockdep_set_subclass(&mousedev->mutex,
-			     minor == MOUSEDEV_MIX ? SINGLE_DEPTH_NESTING : 0);
+			     mixdev ? SINGLE_DEPTH_NESTING : 0);
 	init_waitqueue_head(&mousedev->wait);
 
-	if (minor == MOUSEDEV_MIX)
+	if (mixdev) {
 		dev_set_name(&mousedev->dev, "mice");
-	else
-		dev_set_name(&mousedev->dev, "mouse%d", minor);
+	} else {
+		int dev_no = minor;
+		/* Normalize device number if it falls into legacy range */
+		if (dev_no < MOUSEDEV_MINOR_BASE + MOUSEDEV_MINORS)
+			dev_no -= MOUSEDEV_MINOR_BASE;
+		dev_set_name(&mousedev->dev, "mouse%d", dev_no);
+	}
 
-	mousedev->minor = minor;
 	mousedev->exist = true;
+	mousedev->is_mixdev = mixdev;
 	mousedev->handle.dev = input_get_device(dev);
 	mousedev->handle.name = dev_name(&mousedev->dev);
 	mousedev->handle.handler = handler;
@@ -885,17 +881,18 @@
 	mousedev->dev.class = &input_class;
 	if (dev)
 		mousedev->dev.parent = &dev->dev;
-	mousedev->dev.devt = MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor);
+	mousedev->dev.devt = MKDEV(INPUT_MAJOR, minor);
 	mousedev->dev.release = mousedev_free;
 	device_initialize(&mousedev->dev);
 
-	if (minor != MOUSEDEV_MIX) {
+	if (!mixdev) {
 		error = input_register_handle(&mousedev->handle);
 		if (error)
 			goto err_free_mousedev;
 	}
 
-	error = mousedev_install_chrdev(mousedev);
+	cdev_init(&mousedev->cdev, &mousedev_fops);
+	error = cdev_add(&mousedev->cdev, mousedev->dev.devt, 1);
 	if (error)
 		goto err_unregister_handle;
 
@@ -908,10 +905,12 @@
  err_cleanup_mousedev:
 	mousedev_cleanup(mousedev);
  err_unregister_handle:
-	if (minor != MOUSEDEV_MIX)
+	if (!mixdev)
 		input_unregister_handle(&mousedev->handle);
  err_free_mousedev:
 	put_device(&mousedev->dev);
+ err_free_minor:
+	input_free_minor(minor);
  err_out:
 	return ERR_PTR(error);
 }
@@ -920,7 +919,8 @@
 {
 	device_del(&mousedev->dev);
 	mousedev_cleanup(mousedev);
-	if (mousedev->minor != MOUSEDEV_MIX)
+	input_free_minor(MINOR(mousedev->dev.devt));
+	if (!mousedev->is_mixdev)
 		input_unregister_handle(&mousedev->handle);
 	put_device(&mousedev->dev);
 }
@@ -938,7 +938,7 @@
 		if (retval)
 			goto out;
 
-		mousedev->mixdev_open = 1;
+		mousedev->opened_by_mixdev = true;
 	}
 
 	get_device(&mousedev->dev);
@@ -953,8 +953,8 @@
 {
 	mutex_lock(&mousedev_mix->mutex);
 
-	if (mousedev->mixdev_open) {
-		mousedev->mixdev_open = 0;
+	if (mousedev->opened_by_mixdev) {
+		mousedev->opened_by_mixdev = false;
 		mousedev_close_device(mousedev);
 	}
 
@@ -969,19 +969,9 @@
 			    const struct input_device_id *id)
 {
 	struct mousedev *mousedev;
-	int minor;
 	int error;
 
-	for (minor = 0; minor < MOUSEDEV_MINORS; minor++)
-		if (!mousedev_table[minor])
-			break;
-
-	if (minor == MOUSEDEV_MINORS) {
-		pr_err("no more free mousedev devices\n");
-		return -ENFILE;
-	}
-
-	mousedev = mousedev_create(dev, handler, minor);
+	mousedev = mousedev_create(dev, handler, false);
 	if (IS_ERR(mousedev))
 		return PTR_ERR(mousedev);
 
@@ -1054,27 +1044,53 @@
 MODULE_DEVICE_TABLE(input, mousedev_ids);
 
 static struct input_handler mousedev_handler = {
-	.event =	mousedev_event,
-	.connect =	mousedev_connect,
-	.disconnect =	mousedev_disconnect,
-	.fops =		&mousedev_fops,
-	.minor =	MOUSEDEV_MINOR_BASE,
-	.name =		"mousedev",
-	.id_table =	mousedev_ids,
+	.event		= mousedev_event,
+	.connect	= mousedev_connect,
+	.disconnect	= mousedev_disconnect,
+	.legacy_minors	= true,
+	.minor		= MOUSEDEV_MINOR_BASE,
+	.name		= "mousedev",
+	.id_table	= mousedev_ids,
 };
 
 #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
+#include <linux/miscdevice.h>
+
 static struct miscdevice psaux_mouse = {
-	PSMOUSE_MINOR, "psaux", &mousedev_fops
+	.minor	= PSMOUSE_MINOR,
+	.name	= "psaux",
+	.fops	= &mousedev_fops,
 };
-static int psaux_registered;
+
+static bool psaux_registered;
+
+static void __init mousedev_psaux_register(void)
+{
+	int error;
+
+	error = misc_register(&psaux_mouse);
+	if (error)
+		pr_warn("could not register psaux device, error: %d\n",
+			   error);
+	else
+		psaux_registered = true;
+}
+
+static void __exit mousedev_psaux_unregister(void)
+{
+	if (psaux_registered)
+		misc_deregister(&psaux_mouse);
+}
+#else
+static inline void mousedev_psaux_register(void) { }
+static inline void mousedev_psaux_unregister(void) { }
 #endif
 
 static int __init mousedev_init(void)
 {
 	int error;
 
-	mousedev_mix = mousedev_create(NULL, &mousedev_handler, MOUSEDEV_MIX);
+	mousedev_mix = mousedev_create(NULL, &mousedev_handler, true);
 	if (IS_ERR(mousedev_mix))
 		return PTR_ERR(mousedev_mix);
 
@@ -1084,14 +1100,7 @@
 		return error;
 	}
 
-#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
-	error = misc_register(&psaux_mouse);
-	if (error)
-		pr_warn("could not register psaux device, error: %d\n",
-			   error);
-	else
-		psaux_registered = 1;
-#endif
+	mousedev_psaux_register();
 
 	pr_info("PS/2 mouse device common for all mice\n");
 
@@ -1100,10 +1109,7 @@
 
 static void __exit mousedev_exit(void)
 {
-#ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
-	if (psaux_registered)
-		misc_deregister(&psaux_mouse);
-#endif
+	mousedev_psaux_unregister();
 	input_unregister_handler(&mousedev_handler);
 	mousedev_destroy(mousedev_mix);
 }
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 0d3219f..9edf980 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -172,6 +172,76 @@
 }
 
 /*
+ * Calculate the resolution of the X or Y axis, given appropriate HID data.
+ * This function is little more than hidinput_calc_abs_res stripped down.
+ */
+static int wacom_calc_hid_res(int logical_extents, int physical_extents,
+                              unsigned char unit, unsigned char exponent)
+{
+	int prev, unit_exponent;
+
+	/* Check if the extents are sane */
+	if (logical_extents <= 0 || physical_extents <= 0)
+		return 0;
+
+	/* Get signed value of nybble-sized twos-compliment exponent */
+	unit_exponent = exponent;
+	if (unit_exponent > 7)
+		unit_exponent -= 16;
+
+	/* Convert physical_extents to millimeters */
+	if (unit == 0x11) {		/* If centimeters */
+		unit_exponent += 1;
+	} else if (unit == 0x13) {	/* If inches */
+		prev = physical_extents;
+		physical_extents *= 254;
+		if (physical_extents < prev)
+			return 0;
+		unit_exponent -= 1;
+	} else {
+		return 0;
+	}
+
+	/* Apply negative unit exponent */
+	for (; unit_exponent < 0; unit_exponent++) {
+		prev = logical_extents;
+		logical_extents *= 10;
+		if (logical_extents < prev)
+			return 0;
+	}
+	/* Apply positive unit exponent */
+	for (; unit_exponent > 0; unit_exponent--) {
+		prev = physical_extents;
+		physical_extents *= 10;
+		if (physical_extents < prev)
+			return 0;
+	}
+
+	/* Calculate resolution */
+	return logical_extents / physical_extents;
+}
+
+/*
+ * The physical dimension specified by the HID descriptor is likely not in
+ * the "100th of a mm" units expected by wacom_calculate_touch_res. This
+ * function adjusts the value of [xy]_phy based on the unit and exponent
+ * provided by the HID descriptor. If an error occurs durring conversion
+ * (e.g. from the unit being left unspecified) [xy]_phy is not modified.
+ */
+static void wacom_fix_phy_from_hid(struct wacom_features *features)
+{
+	int xres = wacom_calc_hid_res(features->x_max, features->x_phy,
+					features->unit, features->unitExpo);
+	int yres = wacom_calc_hid_res(features->y_max, features->y_phy,
+					features->unit, features->unitExpo);
+
+	if (xres > 0 && yres > 0) {
+		features->x_phy = (100 * features->x_max) / xres;
+		features->y_phy = (100 * features->y_max) / yres;
+	}
+}
+
+/*
  * Static values for max X/Y and resolution of Pen interface is stored in
  * features. This mean physical size of active area can be computed.
  * This is useful to do when Pen and Touch have same active area of tablet.
@@ -432,58 +502,54 @@
 	return result;
 }
 
-static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_features *features)
+static int wacom_set_device_mode(struct usb_interface *intf, int report_id, int length, int mode)
 {
 	unsigned char *rep_data;
-	int limit = 0, report_id = 2;
-	int error = -ENOMEM;
+	int error = -ENOMEM, limit = 0;
 
-	rep_data = kmalloc(4, GFP_KERNEL);
+	rep_data = kzalloc(length, GFP_KERNEL);
 	if (!rep_data)
 		return error;
 
-	/* ask to report Wacom data */
-	if (features->device_type == BTN_TOOL_FINGER) {
-		/* if it is an MT Tablet PC touch */
-		if (features->type > TABLETPC) {
-			do {
-				rep_data[0] = 3;
-				rep_data[1] = 4;
-				rep_data[2] = 0;
-				rep_data[3] = 0;
-				report_id = 3;
-				error = wacom_set_report(intf,
-							 WAC_HID_FEATURE_REPORT,
-							 report_id,
-							 rep_data, 4, 1);
-				if (error >= 0)
-					error = wacom_get_report(intf,
-							WAC_HID_FEATURE_REPORT,
-							report_id,
-							rep_data, 4, 1);
-			} while ((error < 0 || rep_data[1] != 4) &&
-				 limit++ < WAC_MSG_RETRIES);
-		}
-	} else if (features->type <= BAMBOO_PT &&
-		   features->type != WIRELESS &&
-		   features->device_type == BTN_TOOL_PEN) {
-		do {
-			rep_data[0] = 2;
-			rep_data[1] = 2;
-			error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
-						 report_id, rep_data, 2, 1);
-			if (error >= 0)
-				error = wacom_get_report(intf,
-						WAC_HID_FEATURE_REPORT,
-						report_id, rep_data, 2, 1);
-		} while ((error < 0 || rep_data[1] != 2) && limit++ < WAC_MSG_RETRIES);
-	}
+	rep_data[0] = report_id;
+	rep_data[1] = mode;
+
+	do {
+		error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
+		                         report_id, rep_data, length, 1);
+		if (error >= 0)
+			error = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
+			                         report_id, rep_data, length, 1);
+	} while ((error < 0 || rep_data[1] != mode) && limit++ < WAC_MSG_RETRIES);
 
 	kfree(rep_data);
 
 	return error < 0 ? error : 0;
 }
 
+/*
+ * Switch the tablet into its most-capable mode. Wacom tablets are
+ * typically configured to power-up in a mode which sends mouse-like
+ * reports to the OS. To get absolute position, pressure data, etc.
+ * from the tablet, it is necessary to switch the tablet out of this
+ * mode and into one which sends the full range of tablet data.
+ */
+static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_features *features)
+{
+	if (features->device_type == BTN_TOOL_FINGER) {
+		if (features->type > TABLETPC) {
+			/* MT Tablet PC touch */
+			return wacom_set_device_mode(intf, 3, 4, 4);
+		}
+	} else if (features->device_type == BTN_TOOL_PEN) {
+		if (features->type <= BAMBOO_PT && features->type != WIRELESS) {
+			return wacom_set_device_mode(intf, 2, 2, 2);
+		}
+	}
+
+	return 0;
+}
+
 static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
 					 struct wacom_features *features)
 {
@@ -531,6 +597,7 @@
 	error = wacom_parse_hid(intf, hid_desc, features);
 	if (error)
 		goto out;
+	wacom_fix_phy_from_hid(features);
 
  out:
 	return error;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 08b462b..c3468c8 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -25,6 +25,11 @@
 #define WACOM_INTUOS_RES	100
 #define WACOM_INTUOS3_RES	200
 
+/* Scale factor relating reported contact size to logical contact area.
+ * 2^14/pi is a good approximation on Intuos5 and 3rd-gen Bamboo
+ */
+#define WACOM_CONTACT_AREA_SCALE 2607
+
 static int wacom_penpartner_irq(struct wacom_wac *wacom)
 {
 	unsigned char *data = wacom->data;
@@ -326,7 +331,7 @@
 
 	/* Enter report */
 	if ((data[1] & 0xfc) == 0xc0) {
-		if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+		if (features->quirks == WACOM_QUIRK_MULTI_INPUT)
 			wacom->shared->stylus_in_proximity = true;
 
 		/* serial number of the tool */
@@ -414,7 +419,7 @@
 
 	/* Exit report */
 	if ((data[1] & 0xfe) == 0x80) {
-		if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+		if (features->quirks == WACOM_QUIRK_MULTI_INPUT)
 			wacom->shared->stylus_in_proximity = false;
 
 		/*
@@ -1043,11 +1048,19 @@
 	if (touch) {
 		int x = (data[2] << 4) | (data[4] >> 4);
 		int y = (data[3] << 4) | (data[4] & 0x0f);
-		int w = data[6];
+		int a = data[5];
+
+		// "a" is a scaled-down area which we assume is roughly
+		// circular and which can be described as: a=(pi*r^2)/C.
+		int x_res  = input_abs_get_res(input, ABS_X);
+		int y_res  = input_abs_get_res(input, ABS_Y);
+		int width  = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE);
+		int height = width * y_res / x_res;
 
 		input_report_abs(input, ABS_MT_POSITION_X, x);
 		input_report_abs(input, ABS_MT_POSITION_Y, y);
-		input_report_abs(input, ABS_MT_TOUCH_MAJOR, w);
+		input_report_abs(input, ABS_MT_TOUCH_MAJOR, width);
+		input_report_abs(input, ABS_MT_TOUCH_MINOR, height);
 	}
 }
 
@@ -1533,7 +1546,9 @@
 			input_mt_init_slots(input_dev, features->touch_max, 0);
 
 			input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
-			                     0, 255, 0, 0);
+			                     0, features->x_max, 0, 0);
+			input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
+			                     0, features->y_max, 0, 0);
 
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
 					     0, features->x_max,
@@ -1641,7 +1656,10 @@
 
 				input_set_abs_params(input_dev,
 						     ABS_MT_TOUCH_MAJOR,
-						     0, 255, 0, 0);
+						     0, features->x_max, 0, 0);
+				input_set_abs_params(input_dev,
+						     ABS_MT_TOUCH_MINOR,
+						     0, features->y_max, 0, 0);
 			}
 
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index e92615d..1df2396a 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -320,10 +320,8 @@
 static void mxt_dump_message(struct device *dev,
 			     struct mxt_message *message)
 {
-	dev_dbg(dev, "reportid: %u\tmessage: %02x %02x %02x %02x %02x %02x %02x\n",
-		message->reportid, message->message[0], message->message[1],
-		message->message[2], message->message[3], message->message[4],
-		message->message[5], message->message[6]);
+	dev_dbg(dev, "reportid: %u\tmessage: %*ph\n",
+		message->reportid, 7, message->message);
 }
 
 static int mxt_check_bootloader(struct i2c_client *client,
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index a1e7601..61d78fa 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -595,7 +595,7 @@
 			j = ipc->num / (sizeof(long) * 8);
 			i = ipc->num % (sizeof(long) * 8);
 			if (j < 8)
-				protos[j] |= (0x1 << i);
+				protos[j] |= (1UL << i);
 			ipc = ipc->next;
 		}
 		if ((r = set_arg(argp, protos, 8 * sizeof(long))))
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index d949b78..91a02ee 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -216,6 +216,13 @@
 	 as a cache, holding recently-read blocks in memory and performing
 	 delayed writes.
 
+config DM_BIO_PRISON
+       tristate
+       depends on BLK_DEV_DM && EXPERIMENTAL
+       ---help---
+	 Some bio locking schemes used by other device-mapper targets
+	 including thin provisioning.
+
 source "drivers/md/persistent-data/Kconfig"
 
 config DM_CRYPT
@@ -247,6 +254,7 @@
        tristate "Thin provisioning target (EXPERIMENTAL)"
        depends on BLK_DEV_DM && EXPERIMENTAL
        select DM_PERSISTENT_DATA
+       select DM_BIO_PRISON
        ---help---
          Provides thin provisioning and snapshots that share a data store.
 
diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index 8b2e0df..94dce8b 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -29,6 +29,7 @@
 obj-$(CONFIG_BLK_DEV_MD)	+= md-mod.o
 obj-$(CONFIG_BLK_DEV_DM)	+= dm-mod.o
 obj-$(CONFIG_DM_BUFIO)		+= dm-bufio.o
+obj-$(CONFIG_DM_BIO_PRISON)	+= dm-bio-prison.o
 obj-$(CONFIG_DM_CRYPT)		+= dm-crypt.o
 obj-$(CONFIG_DM_DELAY)		+= dm-delay.o
 obj-$(CONFIG_DM_FLAKEY)		+= dm-flakey.o
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 94e7f6b..7155945 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -163,20 +163,17 @@
 	 * As devices are only added or removed when raid_disk is < 0 and
 	 * nr_pending is 0 and In_sync is clear, the entries we return will
 	 * still be in the same position on the list when we re-enter
-	 * list_for_each_continue_rcu.
+	 * list_for_each_entry_continue_rcu.
 	 */
-	struct list_head *pos;
 	rcu_read_lock();
 	if (rdev == NULL)
 		/* start at the beginning */
-		pos = &mddev->disks;
+		rdev = list_entry_rcu(&mddev->disks, struct md_rdev, same_set);
 	else {
 		/* release the previous rdev and start from there. */
 		rdev_dec_pending(rdev, mddev);
-		pos = &rdev->same_set;
 	}
-	list_for_each_continue_rcu(pos, &mddev->disks) {
-		rdev = list_entry(pos, struct md_rdev, same_set);
+	list_for_each_entry_continue_rcu(rdev, &mddev->disks, same_set) {
 		if (rdev->raid_disk >= 0 &&
 		    !test_bit(Faulty, &rdev->flags)) {
 			/* this is a usable devices */
@@ -473,14 +470,10 @@
 {
 	bitmap_super_t *sb;
 	unsigned long chunksize, daemon_sleep, write_behind;
-	int err = -EINVAL;
 
 	bitmap->storage.sb_page = alloc_page(GFP_KERNEL);
-	if (IS_ERR(bitmap->storage.sb_page)) {
-		err = PTR_ERR(bitmap->storage.sb_page);
-		bitmap->storage.sb_page = NULL;
-		return err;
-	}
+	if (bitmap->storage.sb_page == NULL)
+		return -ENOMEM;
 	bitmap->storage.sb_page->index = 0;
 
 	sb = kmap_atomic(bitmap->storage.sb_page);
diff --git a/drivers/md/dm-bio-prison.c b/drivers/md/dm-bio-prison.c
new file mode 100644
index 0000000..e4e8415
--- /dev/null
+++ b/drivers/md/dm-bio-prison.c
@@ -0,0 +1,415 @@
+/*
+ * Copyright (C) 2012 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm.h"
+#include "dm-bio-prison.h"
+
+#include <linux/spinlock.h>
+#include <linux/mempool.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+/*----------------------------------------------------------------*/
+
+struct dm_bio_prison_cell {
+	struct hlist_node list;
+	struct dm_bio_prison *prison;
+	struct dm_cell_key key;
+	struct bio *holder;
+	struct bio_list bios;
+};
+
+struct dm_bio_prison {
+	spinlock_t lock;
+	mempool_t *cell_pool;
+
+	unsigned nr_buckets;
+	unsigned hash_mask;
+	struct hlist_head *cells;
+};
+
+/*----------------------------------------------------------------*/
+
+static uint32_t calc_nr_buckets(unsigned nr_cells)
+{
+	uint32_t n = 128;
+
+	nr_cells /= 4;
+	nr_cells = min(nr_cells, 8192u);
+
+	while (n < nr_cells)
+		n <<= 1;
+
+	return n;
+}
+
+static struct kmem_cache *_cell_cache;
+
+/*
+ * @nr_cells should be the number of cells you want in use _concurrently_.
+ * Don't confuse it with the number of distinct keys.
+ */
+struct dm_bio_prison *dm_bio_prison_create(unsigned nr_cells)
+{
+	unsigned i;
+	uint32_t nr_buckets = calc_nr_buckets(nr_cells);
+	size_t len = sizeof(struct dm_bio_prison) +
+		(sizeof(struct hlist_head) * nr_buckets);
+	struct dm_bio_prison *prison = kmalloc(len, GFP_KERNEL);
+
+	if (!prison)
+		return NULL;
+
+	spin_lock_init(&prison->lock);
+	prison->cell_pool = mempool_create_slab_pool(nr_cells, _cell_cache);
+	if (!prison->cell_pool) {
+		kfree(prison);
+		return NULL;
+	}
+
+	prison->nr_buckets = nr_buckets;
+	prison->hash_mask = nr_buckets - 1;
+	prison->cells = (struct hlist_head *) (prison + 1);
+	for (i = 0; i < nr_buckets; i++)
+		INIT_HLIST_HEAD(prison->cells + i);
+
+	return prison;
+}
+EXPORT_SYMBOL_GPL(dm_bio_prison_create);
+
+void dm_bio_prison_destroy(struct dm_bio_prison *prison)
+{
+	mempool_destroy(prison->cell_pool);
+	kfree(prison);
+}
+EXPORT_SYMBOL_GPL(dm_bio_prison_destroy);
+
+static uint32_t hash_key(struct dm_bio_prison *prison, struct dm_cell_key *key)
+{
+	const unsigned long BIG_PRIME = 4294967291UL;
+	uint64_t hash = key->block * BIG_PRIME;
+
+	return (uint32_t) (hash & prison->hash_mask);
+}
+
+static int keys_equal(struct dm_cell_key *lhs, struct dm_cell_key *rhs)
+{
+	       return (lhs->virtual == rhs->virtual) &&
+		       (lhs->dev == rhs->dev) &&
+		       (lhs->block == rhs->block);
+}
+
+static struct dm_bio_prison_cell *__search_bucket(struct hlist_head *bucket,
+						  struct dm_cell_key *key)
+{
+	struct dm_bio_prison_cell *cell;
+	struct hlist_node *tmp;
+
+	hlist_for_each_entry(cell, tmp, bucket, list)
+		if (keys_equal(&cell->key, key))
+			return cell;
+
+	return NULL;
+}
+
+/*
+ * This may block if a new cell needs allocating.  You must ensure that
+ * cells will be unlocked even if the calling thread is blocked.
+ *
+ * Returns 1 if the cell was already held, 0 if @inmate is the new holder.
+ */
+int dm_bio_detain(struct dm_bio_prison *prison, struct dm_cell_key *key,
+		  struct bio *inmate, struct dm_bio_prison_cell **ref)
+{
+	int r = 1;
+	unsigned long flags;
+	uint32_t hash = hash_key(prison, key);
+	struct dm_bio_prison_cell *cell, *cell2;
+
+	BUG_ON(hash > prison->nr_buckets);
+
+	spin_lock_irqsave(&prison->lock, flags);
+
+	cell = __search_bucket(prison->cells + hash, key);
+	if (cell) {
+		bio_list_add(&cell->bios, inmate);
+		goto out;
+	}
+
+	/*
+	 * Allocate a new cell
+	 */
+	spin_unlock_irqrestore(&prison->lock, flags);
+	cell2 = mempool_alloc(prison->cell_pool, GFP_NOIO);
+	spin_lock_irqsave(&prison->lock, flags);
+
+	/*
+	 * We've been unlocked, so we have to double check that
+	 * nobody else has inserted this cell in the meantime.
+	 */
+	cell = __search_bucket(prison->cells + hash, key);
+	if (cell) {
+		mempool_free(cell2, prison->cell_pool);
+		bio_list_add(&cell->bios, inmate);
+		goto out;
+	}
+
+	/*
+	 * Use new cell.
+	 */
+	cell = cell2;
+
+	cell->prison = prison;
+	memcpy(&cell->key, key, sizeof(cell->key));
+	cell->holder = inmate;
+	bio_list_init(&cell->bios);
+	hlist_add_head(&cell->list, prison->cells + hash);
+
+	r = 0;
+
+out:
+	spin_unlock_irqrestore(&prison->lock, flags);
+
+	*ref = cell;
+
+	return r;
+}
+EXPORT_SYMBOL_GPL(dm_bio_detain);
+
+/*
+ * @inmates must have been initialised prior to this call
+ */
+static void __cell_release(struct dm_bio_prison_cell *cell, struct bio_list *inmates)
+{
+	struct dm_bio_prison *prison = cell->prison;
+
+	hlist_del(&cell->list);
+
+	if (inmates) {
+		bio_list_add(inmates, cell->holder);
+		bio_list_merge(inmates, &cell->bios);
+	}
+
+	mempool_free(cell, prison->cell_pool);
+}
+
+void dm_cell_release(struct dm_bio_prison_cell *cell, struct bio_list *bios)
+{
+	unsigned long flags;
+	struct dm_bio_prison *prison = cell->prison;
+
+	spin_lock_irqsave(&prison->lock, flags);
+	__cell_release(cell, bios);
+	spin_unlock_irqrestore(&prison->lock, flags);
+}
+EXPORT_SYMBOL_GPL(dm_cell_release);
+
+/*
+ * There are a couple of places where we put a bio into a cell briefly
+ * before taking it out again.  In these situations we know that no other
+ * bio may be in the cell.  This function releases the cell, and also does
+ * a sanity check.
+ */
+static void __cell_release_singleton(struct dm_bio_prison_cell *cell, struct bio *bio)
+{
+	BUG_ON(cell->holder != bio);
+	BUG_ON(!bio_list_empty(&cell->bios));
+
+	__cell_release(cell, NULL);
+}
+
+void dm_cell_release_singleton(struct dm_bio_prison_cell *cell, struct bio *bio)
+{
+	unsigned long flags;
+	struct dm_bio_prison *prison = cell->prison;
+
+	spin_lock_irqsave(&prison->lock, flags);
+	__cell_release_singleton(cell, bio);
+	spin_unlock_irqrestore(&prison->lock, flags);
+}
+EXPORT_SYMBOL_GPL(dm_cell_release_singleton);
+
+/*
+ * Sometimes we don't want the holder, just the additional bios.
+ */
+static void __cell_release_no_holder(struct dm_bio_prison_cell *cell, struct bio_list *inmates)
+{
+	struct dm_bio_prison *prison = cell->prison;
+
+	hlist_del(&cell->list);
+	bio_list_merge(inmates, &cell->bios);
+
+	mempool_free(cell, prison->cell_pool);
+}
+
+void dm_cell_release_no_holder(struct dm_bio_prison_cell *cell, struct bio_list *inmates)
+{
+	unsigned long flags;
+	struct dm_bio_prison *prison = cell->prison;
+
+	spin_lock_irqsave(&prison->lock, flags);
+	__cell_release_no_holder(cell, inmates);
+	spin_unlock_irqrestore(&prison->lock, flags);
+}
+EXPORT_SYMBOL_GPL(dm_cell_release_no_holder);
+
+void dm_cell_error(struct dm_bio_prison_cell *cell)
+{
+	struct dm_bio_prison *prison = cell->prison;
+	struct bio_list bios;
+	struct bio *bio;
+	unsigned long flags;
+
+	bio_list_init(&bios);
+
+	spin_lock_irqsave(&prison->lock, flags);
+	__cell_release(cell, &bios);
+	spin_unlock_irqrestore(&prison->lock, flags);
+
+	while ((bio = bio_list_pop(&bios)))
+		bio_io_error(bio);
+}
+EXPORT_SYMBOL_GPL(dm_cell_error);
+
+/*----------------------------------------------------------------*/
+
+#define DEFERRED_SET_SIZE 64
+
+struct dm_deferred_entry {
+	struct dm_deferred_set *ds;
+	unsigned count;
+	struct list_head work_items;
+};
+
+struct dm_deferred_set {
+	spinlock_t lock;
+	unsigned current_entry;
+	unsigned sweeper;
+	struct dm_deferred_entry entries[DEFERRED_SET_SIZE];
+};
+
+struct dm_deferred_set *dm_deferred_set_create(void)
+{
+	int i;
+	struct dm_deferred_set *ds;
+
+	ds = kmalloc(sizeof(*ds), GFP_KERNEL);
+	if (!ds)
+		return NULL;
+
+	spin_lock_init(&ds->lock);
+	ds->current_entry = 0;
+	ds->sweeper = 0;
+	for (i = 0; i < DEFERRED_SET_SIZE; i++) {
+		ds->entries[i].ds = ds;
+		ds->entries[i].count = 0;
+		INIT_LIST_HEAD(&ds->entries[i].work_items);
+	}
+
+	return ds;
+}
+EXPORT_SYMBOL_GPL(dm_deferred_set_create);
+
+void dm_deferred_set_destroy(struct dm_deferred_set *ds)
+{
+	kfree(ds);
+}
+EXPORT_SYMBOL_GPL(dm_deferred_set_destroy);
+
+struct dm_deferred_entry *dm_deferred_entry_inc(struct dm_deferred_set *ds)
+{
+	unsigned long flags;
+	struct dm_deferred_entry *entry;
+
+	spin_lock_irqsave(&ds->lock, flags);
+	entry = ds->entries + ds->current_entry;
+	entry->count++;
+	spin_unlock_irqrestore(&ds->lock, flags);
+
+	return entry;
+}
+EXPORT_SYMBOL_GPL(dm_deferred_entry_inc);
+
+static unsigned ds_next(unsigned index)
+{
+	return (index + 1) % DEFERRED_SET_SIZE;
+}
+
+static void __sweep(struct dm_deferred_set *ds, struct list_head *head)
+{
+	while ((ds->sweeper != ds->current_entry) &&
+	       !ds->entries[ds->sweeper].count) {
+		list_splice_init(&ds->entries[ds->sweeper].work_items, head);
+		ds->sweeper = ds_next(ds->sweeper);
+	}
+
+	if ((ds->sweeper == ds->current_entry) && !ds->entries[ds->sweeper].count)
+		list_splice_init(&ds->entries[ds->sweeper].work_items, head);
+}
+
+void dm_deferred_entry_dec(struct dm_deferred_entry *entry, struct list_head *head)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&entry->ds->lock, flags);
+	BUG_ON(!entry->count);
+	--entry->count;
+	__sweep(entry->ds, head);
+	spin_unlock_irqrestore(&entry->ds->lock, flags);
+}
+EXPORT_SYMBOL_GPL(dm_deferred_entry_dec);
+
+/*
+ * Returns 1 if deferred or 0 if no pending items to delay job.
+ */
+int dm_deferred_set_add_work(struct dm_deferred_set *ds, struct list_head *work)
+{
+	int r = 1;
+	unsigned long flags;
+	unsigned next_entry;
+
+	spin_lock_irqsave(&ds->lock, flags);
+	if ((ds->sweeper == ds->current_entry) &&
+	    !ds->entries[ds->current_entry].count)
+		r = 0;
+	else {
+		list_add(work, &ds->entries[ds->current_entry].work_items);
+		next_entry = ds_next(ds->current_entry);
+		if (!ds->entries[next_entry].count)
+			ds->current_entry = next_entry;
+	}
+	spin_unlock_irqrestore(&ds->lock, flags);
+
+	return r;
+}
+EXPORT_SYMBOL_GPL(dm_deferred_set_add_work);
+
+/*----------------------------------------------------------------*/
+
+static int __init dm_bio_prison_init(void)
+{
+	_cell_cache = KMEM_CACHE(dm_bio_prison_cell, 0);
+	if (!_cell_cache)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void __exit dm_bio_prison_exit(void)
+{
+	kmem_cache_destroy(_cell_cache);
+	_cell_cache = NULL;
+}
+
+/*
+ * module hooks
+ */
+module_init(dm_bio_prison_init);
+module_exit(dm_bio_prison_exit);
+
+MODULE_DESCRIPTION(DM_NAME " bio prison");
+MODULE_AUTHOR("Joe Thornber <dm-devel@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/md/dm-bio-prison.h b/drivers/md/dm-bio-prison.h
new file mode 100644
index 0000000..4e0ac376
--- /dev/null
+++ b/drivers/md/dm-bio-prison.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2011-2012 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_BIO_PRISON_H
+#define DM_BIO_PRISON_H
+
+#include "persistent-data/dm-block-manager.h" /* FIXME: for dm_block_t */
+#include "dm-thin-metadata.h" /* FIXME: for dm_thin_id */
+
+#include <linux/list.h>
+#include <linux/bio.h>
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Sometimes we can't deal with a bio straight away.  We put them in prison
+ * where they can't cause any mischief.  Bios are put in a cell identified
+ * by a key, multiple bios can be in the same cell.  When the cell is
+ * subsequently unlocked the bios become available.
+ */
+struct dm_bio_prison;
+struct dm_bio_prison_cell;
+
+/* FIXME: this needs to be more abstract */
+struct dm_cell_key {
+	int virtual;
+	dm_thin_id dev;
+	dm_block_t block;
+};
+
+struct dm_bio_prison *dm_bio_prison_create(unsigned nr_cells);
+void dm_bio_prison_destroy(struct dm_bio_prison *prison);
+
+/*
+ * This may block if a new cell needs allocating.  You must ensure that
+ * cells will be unlocked even if the calling thread is blocked.
+ *
+ * Returns 1 if the cell was already held, 0 if @inmate is the new holder.
+ */
+int dm_bio_detain(struct dm_bio_prison *prison, struct dm_cell_key *key,
+		  struct bio *inmate, struct dm_bio_prison_cell **ref);
+
+void dm_cell_release(struct dm_bio_prison_cell *cell, struct bio_list *bios);
+void dm_cell_release_singleton(struct dm_bio_prison_cell *cell, struct bio *bio); // FIXME: bio arg not needed
+void dm_cell_release_no_holder(struct dm_bio_prison_cell *cell, struct bio_list *inmates);
+void dm_cell_error(struct dm_bio_prison_cell *cell);
+
+/*----------------------------------------------------------------*/
+
+/*
+ * We use the deferred set to keep track of pending reads to shared blocks.
+ * We do this to ensure the new mapping caused by a write isn't performed
+ * until these prior reads have completed.  Otherwise the insertion of the
+ * new mapping could free the old block that the read bios are mapped to.
+ */
+
+struct dm_deferred_set;
+struct dm_deferred_entry;
+
+struct dm_deferred_set *dm_deferred_set_create(void);
+void dm_deferred_set_destroy(struct dm_deferred_set *ds);
+
+struct dm_deferred_entry *dm_deferred_entry_inc(struct dm_deferred_set *ds);
+void dm_deferred_entry_dec(struct dm_deferred_entry *entry, struct list_head *head);
+int dm_deferred_set_add_work(struct dm_deferred_set *ds, struct list_head *work);
+
+/*----------------------------------------------------------------*/
+
+#endif
diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c
index cc06a1e..651ca79 100644
--- a/drivers/md/dm-bufio.c
+++ b/drivers/md/dm-bufio.c
@@ -280,9 +280,7 @@
 	BUG_ON(!mutex_is_locked(&dm_bufio_clients_lock));
 	BUG_ON(dm_bufio_client_count < 0);
 
-	dm_bufio_cache_size_latch = dm_bufio_cache_size;
-
-	barrier();
+	dm_bufio_cache_size_latch = ACCESS_ONCE(dm_bufio_cache_size);
 
 	/*
 	 * Use default if set to 0 and report the actual cache size used.
@@ -441,8 +439,7 @@
 	c->n_buffers[b->list_mode]--;
 	c->n_buffers[dirty]++;
 	b->list_mode = dirty;
-	list_del(&b->lru_list);
-	list_add(&b->lru_list, &c->lru[dirty]);
+	list_move(&b->lru_list, &c->lru[dirty]);
 }
 
 /*----------------------------------------------------------------
@@ -813,7 +810,7 @@
 {
 	unsigned long buffers;
 
-	if (dm_bufio_cache_size != dm_bufio_cache_size_latch) {
+	if (ACCESS_ONCE(dm_bufio_cache_size) != dm_bufio_cache_size_latch) {
 		mutex_lock(&dm_bufio_clients_lock);
 		__cache_size_refresh();
 		mutex_unlock(&dm_bufio_clients_lock);
@@ -1591,11 +1588,9 @@
 
 static void cleanup_old_buffers(void)
 {
-	unsigned long max_age = dm_bufio_max_age;
+	unsigned long max_age = ACCESS_ONCE(dm_bufio_max_age);
 	struct dm_bufio_client *c;
 
-	barrier();
-
 	if (max_age > ULONG_MAX / HZ)
 		max_age = ULONG_MAX / HZ;
 
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index d778563..573bd04 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1309,13 +1309,14 @@
 {
 	struct multipath *m = ti->private;
 	struct dm_mpath_io *mpio = map_context->ptr;
-	struct pgpath *pgpath = mpio->pgpath;
+	struct pgpath *pgpath;
 	struct path_selector *ps;
 	int r;
 
 	BUG_ON(!mpio);
 
 	r  = do_end_io(m, clone, error, mpio);
+	pgpath = mpio->pgpath;
 	if (pgpath) {
 		ps = &pgpath->pg->ps;
 		if (ps->type->end_io)
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 982e3e3..45d94a7 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -338,6 +338,84 @@
 }
 
 /*
+ * validate_rebuild_devices
+ * @rs
+ *
+ * Determine if the devices specified for rebuild can result in a valid
+ * usable array that is capable of rebuilding the given devices.
+ *
+ * Returns: 0 on success, -EINVAL on failure.
+ */
+static int validate_rebuild_devices(struct raid_set *rs)
+{
+	unsigned i, rebuild_cnt = 0;
+	unsigned rebuilds_per_group, copies, d;
+
+	if (!(rs->print_flags & DMPF_REBUILD))
+		return 0;
+
+	for (i = 0; i < rs->md.raid_disks; i++)
+		if (!test_bit(In_sync, &rs->dev[i].rdev.flags))
+			rebuild_cnt++;
+
+	switch (rs->raid_type->level) {
+	case 1:
+		if (rebuild_cnt >= rs->md.raid_disks)
+			goto too_many;
+		break;
+	case 4:
+	case 5:
+	case 6:
+		if (rebuild_cnt > rs->raid_type->parity_devs)
+			goto too_many;
+		break;
+	case 10:
+		copies = raid10_md_layout_to_copies(rs->md.layout);
+		if (rebuild_cnt < copies)
+			break;
+
+		/*
+		 * It is possible to have a higher rebuild count for RAID10,
+		 * as long as the failed devices occur in different mirror
+		 * groups (i.e. different stripes).
+		 *
+		 * Right now, we only allow for "near" copies.  When other
+		 * formats are added, we will have to check those too.
+		 *
+		 * When checking "near" format, make sure no adjacent devices
+		 * have failed beyond what can be handled.  In addition to the
+		 * simple case where the number of devices is a multiple of the
+		 * number of copies, we must also handle cases where the number
+		 * of devices is not a multiple of the number of copies.
+		 * E.g.    dev1 dev2 dev3 dev4 dev5
+		 *          A    A    B    B    C
+		 *          C    D    D    E    E
+		 */
+		rebuilds_per_group = 0;
+		for (i = 0; i < rs->md.raid_disks * copies; i++) {
+			d = i % rs->md.raid_disks;
+			if (!test_bit(In_sync, &rs->dev[d].rdev.flags) &&
+			    (++rebuilds_per_group >= copies))
+				goto too_many;
+			if (!((i + 1) % copies))
+				rebuilds_per_group = 0;
+		}
+		break;
+	default:
+		DMERR("The rebuild parameter is not supported for %s",
+		      rs->raid_type->name);
+		rs->ti->error = "Rebuild not supported for this RAID type";
+		return -EINVAL;
+	}
+
+	return 0;
+
+too_many:
+	rs->ti->error = "Too many rebuild devices specified";
+	return -EINVAL;
+}
+
+/*
  * Possible arguments are...
  *	<chunk_size> [optional_args]
  *
@@ -365,7 +443,7 @@
 {
 	char *raid10_format = "near";
 	unsigned raid10_copies = 2;
-	unsigned i, rebuild_cnt = 0;
+	unsigned i;
 	unsigned long value, region_size = 0;
 	sector_t sectors_per_dev = rs->ti->len;
 	sector_t max_io_len;
@@ -461,31 +539,7 @@
 
 		/* Parameters that take a numeric value are checked here */
 		if (!strcasecmp(key, "rebuild")) {
-			rebuild_cnt++;
-
-			switch (rs->raid_type->level) {
-			case 1:
-				if (rebuild_cnt >= rs->md.raid_disks) {
-					rs->ti->error = "Too many rebuild devices specified";
-					return -EINVAL;
-				}
-				break;
-			case 4:
-			case 5:
-			case 6:
-				if (rebuild_cnt > rs->raid_type->parity_devs) {
-					rs->ti->error = "Too many rebuild devices specified for given RAID type";
-					return -EINVAL;
-				}
-				break;
-			case 10:
-			default:
-				DMERR("The rebuild parameter is not supported for %s", rs->raid_type->name);
-				rs->ti->error = "Rebuild not supported for this RAID type";
-				return -EINVAL;
-			}
-
-			if (value > rs->md.raid_disks) {
+			if (value >= rs->md.raid_disks) {
 				rs->ti->error = "Invalid rebuild index given";
 				return -EINVAL;
 			}
@@ -608,6 +662,9 @@
 	}
 	rs->md.dev_sectors = sectors_per_dev;
 
+	if (validate_rebuild_devices(rs))
+		return -EINVAL;
+
 	/* Assume there are no metadata devices until the drives are parsed */
 	rs->md.persistent = 0;
 	rs->md.external = 1;
@@ -960,6 +1017,19 @@
 
 	freshest = NULL;
 	rdev_for_each_safe(rdev, tmp, mddev) {
+		/*
+		 * Skipping super_load due to DMPF_SYNC will cause
+		 * the array to undergo initialization again as
+		 * though it were new.  This is the intended effect
+		 * of the "sync" directive.
+		 *
+		 * When reshaping capability is added, we must ensure
+		 * that the "sync" directive is disallowed during the
+		 * reshape.
+		 */
+		if (rs->print_flags & DMPF_SYNC)
+			continue;
+
 		if (!rdev->meta_bdev)
 			continue;
 
@@ -1360,7 +1430,7 @@
 
 static struct target_type raid_target = {
 	.name = "raid",
-	.version = {1, 3, 0},
+	.version = {1, 3, 1},
 	.module = THIS_MODULE,
 	.ctr = raid_ctr,
 	.dtr = raid_dtr,
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
index c29410a..058acf3 100644
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -5,6 +5,7 @@
  */
 
 #include "dm-thin-metadata.h"
+#include "dm-bio-prison.h"
 #include "dm.h"
 
 #include <linux/device-mapper.h>
@@ -21,7 +22,6 @@
  * Tunable constants
  */
 #define ENDIO_HOOK_POOL_SIZE 1024
-#define DEFERRED_SET_SIZE 64
 #define MAPPING_POOL_SIZE 1024
 #define PRISON_CELLS 1024
 #define COMMIT_PERIOD HZ
@@ -58,7 +58,7 @@
  * i) plug io further to this physical block. (see bio_prison code).
  *
  * ii) quiesce any read io to that shared data block.  Obviously
- * including all devices that share this block.  (see deferred_set code)
+ * including all devices that share this block.  (see dm_deferred_set code)
  *
  * iii) copy the data block to a newly allocate block.  This step can be
  * missed out if the io covers the block. (schedule_copy).
@@ -99,381 +99,10 @@
 /*----------------------------------------------------------------*/
 
 /*
- * Sometimes we can't deal with a bio straight away.  We put them in prison
- * where they can't cause any mischief.  Bios are put in a cell identified
- * by a key, multiple bios can be in the same cell.  When the cell is
- * subsequently unlocked the bios become available.
- */
-struct bio_prison;
-
-struct cell_key {
-	int virtual;
-	dm_thin_id dev;
-	dm_block_t block;
-};
-
-struct dm_bio_prison_cell {
-	struct hlist_node list;
-	struct bio_prison *prison;
-	struct cell_key key;
-	struct bio *holder;
-	struct bio_list bios;
-};
-
-struct bio_prison {
-	spinlock_t lock;
-	mempool_t *cell_pool;
-
-	unsigned nr_buckets;
-	unsigned hash_mask;
-	struct hlist_head *cells;
-};
-
-static uint32_t calc_nr_buckets(unsigned nr_cells)
-{
-	uint32_t n = 128;
-
-	nr_cells /= 4;
-	nr_cells = min(nr_cells, 8192u);
-
-	while (n < nr_cells)
-		n <<= 1;
-
-	return n;
-}
-
-static struct kmem_cache *_cell_cache;
-
-/*
- * @nr_cells should be the number of cells you want in use _concurrently_.
- * Don't confuse it with the number of distinct keys.
- */
-static struct bio_prison *prison_create(unsigned nr_cells)
-{
-	unsigned i;
-	uint32_t nr_buckets = calc_nr_buckets(nr_cells);
-	size_t len = sizeof(struct bio_prison) +
-		(sizeof(struct hlist_head) * nr_buckets);
-	struct bio_prison *prison = kmalloc(len, GFP_KERNEL);
-
-	if (!prison)
-		return NULL;
-
-	spin_lock_init(&prison->lock);
-	prison->cell_pool = mempool_create_slab_pool(nr_cells, _cell_cache);
-	if (!prison->cell_pool) {
-		kfree(prison);
-		return NULL;
-	}
-
-	prison->nr_buckets = nr_buckets;
-	prison->hash_mask = nr_buckets - 1;
-	prison->cells = (struct hlist_head *) (prison + 1);
-	for (i = 0; i < nr_buckets; i++)
-		INIT_HLIST_HEAD(prison->cells + i);
-
-	return prison;
-}
-
-static void prison_destroy(struct bio_prison *prison)
-{
-	mempool_destroy(prison->cell_pool);
-	kfree(prison);
-}
-
-static uint32_t hash_key(struct bio_prison *prison, struct cell_key *key)
-{
-	const unsigned long BIG_PRIME = 4294967291UL;
-	uint64_t hash = key->block * BIG_PRIME;
-
-	return (uint32_t) (hash & prison->hash_mask);
-}
-
-static int keys_equal(struct cell_key *lhs, struct cell_key *rhs)
-{
-	       return (lhs->virtual == rhs->virtual) &&
-		       (lhs->dev == rhs->dev) &&
-		       (lhs->block == rhs->block);
-}
-
-static struct dm_bio_prison_cell *__search_bucket(struct hlist_head *bucket,
-						  struct cell_key *key)
-{
-	struct dm_bio_prison_cell *cell;
-	struct hlist_node *tmp;
-
-	hlist_for_each_entry(cell, tmp, bucket, list)
-		if (keys_equal(&cell->key, key))
-			return cell;
-
-	return NULL;
-}
-
-/*
- * This may block if a new cell needs allocating.  You must ensure that
- * cells will be unlocked even if the calling thread is blocked.
- *
- * Returns 1 if the cell was already held, 0 if @inmate is the new holder.
- */
-static int bio_detain(struct bio_prison *prison, struct cell_key *key,
-		      struct bio *inmate, struct dm_bio_prison_cell **ref)
-{
-	int r = 1;
-	unsigned long flags;
-	uint32_t hash = hash_key(prison, key);
-	struct dm_bio_prison_cell *cell, *cell2;
-
-	BUG_ON(hash > prison->nr_buckets);
-
-	spin_lock_irqsave(&prison->lock, flags);
-
-	cell = __search_bucket(prison->cells + hash, key);
-	if (cell) {
-		bio_list_add(&cell->bios, inmate);
-		goto out;
-	}
-
-	/*
-	 * Allocate a new cell
-	 */
-	spin_unlock_irqrestore(&prison->lock, flags);
-	cell2 = mempool_alloc(prison->cell_pool, GFP_NOIO);
-	spin_lock_irqsave(&prison->lock, flags);
-
-	/*
-	 * We've been unlocked, so we have to double check that
-	 * nobody else has inserted this cell in the meantime.
-	 */
-	cell = __search_bucket(prison->cells + hash, key);
-	if (cell) {
-		mempool_free(cell2, prison->cell_pool);
-		bio_list_add(&cell->bios, inmate);
-		goto out;
-	}
-
-	/*
-	 * Use new cell.
-	 */
-	cell = cell2;
-
-	cell->prison = prison;
-	memcpy(&cell->key, key, sizeof(cell->key));
-	cell->holder = inmate;
-	bio_list_init(&cell->bios);
-	hlist_add_head(&cell->list, prison->cells + hash);
-
-	r = 0;
-
-out:
-	spin_unlock_irqrestore(&prison->lock, flags);
-
-	*ref = cell;
-
-	return r;
-}
-
-/*
- * @inmates must have been initialised prior to this call
- */
-static void __cell_release(struct dm_bio_prison_cell *cell, struct bio_list *inmates)
-{
-	struct bio_prison *prison = cell->prison;
-
-	hlist_del(&cell->list);
-
-	if (inmates) {
-		bio_list_add(inmates, cell->holder);
-		bio_list_merge(inmates, &cell->bios);
-	}
-
-	mempool_free(cell, prison->cell_pool);
-}
-
-static void cell_release(struct dm_bio_prison_cell *cell, struct bio_list *bios)
-{
-	unsigned long flags;
-	struct bio_prison *prison = cell->prison;
-
-	spin_lock_irqsave(&prison->lock, flags);
-	__cell_release(cell, bios);
-	spin_unlock_irqrestore(&prison->lock, flags);
-}
-
-/*
- * There are a couple of places where we put a bio into a cell briefly
- * before taking it out again.  In these situations we know that no other
- * bio may be in the cell.  This function releases the cell, and also does
- * a sanity check.
- */
-static void __cell_release_singleton(struct dm_bio_prison_cell *cell, struct bio *bio)
-{
-	BUG_ON(cell->holder != bio);
-	BUG_ON(!bio_list_empty(&cell->bios));
-
-	__cell_release(cell, NULL);
-}
-
-static void cell_release_singleton(struct dm_bio_prison_cell *cell, struct bio *bio)
-{
-	unsigned long flags;
-	struct bio_prison *prison = cell->prison;
-
-	spin_lock_irqsave(&prison->lock, flags);
-	__cell_release_singleton(cell, bio);
-	spin_unlock_irqrestore(&prison->lock, flags);
-}
-
-/*
- * Sometimes we don't want the holder, just the additional bios.
- */
-static void __cell_release_no_holder(struct dm_bio_prison_cell *cell,
-				     struct bio_list *inmates)
-{
-	struct bio_prison *prison = cell->prison;
-
-	hlist_del(&cell->list);
-	bio_list_merge(inmates, &cell->bios);
-
-	mempool_free(cell, prison->cell_pool);
-}
-
-static void cell_release_no_holder(struct dm_bio_prison_cell *cell,
-				   struct bio_list *inmates)
-{
-	unsigned long flags;
-	struct bio_prison *prison = cell->prison;
-
-	spin_lock_irqsave(&prison->lock, flags);
-	__cell_release_no_holder(cell, inmates);
-	spin_unlock_irqrestore(&prison->lock, flags);
-}
-
-static void cell_error(struct dm_bio_prison_cell *cell)
-{
-	struct bio_prison *prison = cell->prison;
-	struct bio_list bios;
-	struct bio *bio;
-	unsigned long flags;
-
-	bio_list_init(&bios);
-
-	spin_lock_irqsave(&prison->lock, flags);
-	__cell_release(cell, &bios);
-	spin_unlock_irqrestore(&prison->lock, flags);
-
-	while ((bio = bio_list_pop(&bios)))
-		bio_io_error(bio);
-}
-
-/*----------------------------------------------------------------*/
-
-/*
- * We use the deferred set to keep track of pending reads to shared blocks.
- * We do this to ensure the new mapping caused by a write isn't performed
- * until these prior reads have completed.  Otherwise the insertion of the
- * new mapping could free the old block that the read bios are mapped to.
- */
-
-struct deferred_set;
-struct deferred_entry {
-	struct deferred_set *ds;
-	unsigned count;
-	struct list_head work_items;
-};
-
-struct deferred_set {
-	spinlock_t lock;
-	unsigned current_entry;
-	unsigned sweeper;
-	struct deferred_entry entries[DEFERRED_SET_SIZE];
-};
-
-static void ds_init(struct deferred_set *ds)
-{
-	int i;
-
-	spin_lock_init(&ds->lock);
-	ds->current_entry = 0;
-	ds->sweeper = 0;
-	for (i = 0; i < DEFERRED_SET_SIZE; i++) {
-		ds->entries[i].ds = ds;
-		ds->entries[i].count = 0;
-		INIT_LIST_HEAD(&ds->entries[i].work_items);
-	}
-}
-
-static struct deferred_entry *ds_inc(struct deferred_set *ds)
-{
-	unsigned long flags;
-	struct deferred_entry *entry;
-
-	spin_lock_irqsave(&ds->lock, flags);
-	entry = ds->entries + ds->current_entry;
-	entry->count++;
-	spin_unlock_irqrestore(&ds->lock, flags);
-
-	return entry;
-}
-
-static unsigned ds_next(unsigned index)
-{
-	return (index + 1) % DEFERRED_SET_SIZE;
-}
-
-static void __sweep(struct deferred_set *ds, struct list_head *head)
-{
-	while ((ds->sweeper != ds->current_entry) &&
-	       !ds->entries[ds->sweeper].count) {
-		list_splice_init(&ds->entries[ds->sweeper].work_items, head);
-		ds->sweeper = ds_next(ds->sweeper);
-	}
-
-	if ((ds->sweeper == ds->current_entry) && !ds->entries[ds->sweeper].count)
-		list_splice_init(&ds->entries[ds->sweeper].work_items, head);
-}
-
-static void ds_dec(struct deferred_entry *entry, struct list_head *head)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&entry->ds->lock, flags);
-	BUG_ON(!entry->count);
-	--entry->count;
-	__sweep(entry->ds, head);
-	spin_unlock_irqrestore(&entry->ds->lock, flags);
-}
-
-/*
- * Returns 1 if deferred or 0 if no pending items to delay job.
- */
-static int ds_add_work(struct deferred_set *ds, struct list_head *work)
-{
-	int r = 1;
-	unsigned long flags;
-	unsigned next_entry;
-
-	spin_lock_irqsave(&ds->lock, flags);
-	if ((ds->sweeper == ds->current_entry) &&
-	    !ds->entries[ds->current_entry].count)
-		r = 0;
-	else {
-		list_add(work, &ds->entries[ds->current_entry].work_items);
-		next_entry = ds_next(ds->current_entry);
-		if (!ds->entries[next_entry].count)
-			ds->current_entry = next_entry;
-	}
-	spin_unlock_irqrestore(&ds->lock, flags);
-
-	return r;
-}
-
-/*----------------------------------------------------------------*/
-
-/*
  * Key building.
  */
 static void build_data_key(struct dm_thin_device *td,
-			   dm_block_t b, struct cell_key *key)
+			   dm_block_t b, struct dm_cell_key *key)
 {
 	key->virtual = 0;
 	key->dev = dm_thin_dev_id(td);
@@ -481,7 +110,7 @@
 }
 
 static void build_virtual_key(struct dm_thin_device *td, dm_block_t b,
-			      struct cell_key *key)
+			      struct dm_cell_key *key)
 {
 	key->virtual = 1;
 	key->dev = dm_thin_dev_id(td);
@@ -534,7 +163,7 @@
 	unsigned low_water_triggered:1;	/* A dm event has been sent */
 	unsigned no_free_space:1;	/* A -ENOSPC warning has been issued */
 
-	struct bio_prison *prison;
+	struct dm_bio_prison *prison;
 	struct dm_kcopyd_client *copier;
 
 	struct workqueue_struct *wq;
@@ -552,8 +181,8 @@
 
 	struct bio_list retry_on_resume_list;
 
-	struct deferred_set shared_read_ds;
-	struct deferred_set all_io_ds;
+	struct dm_deferred_set *shared_read_ds;
+	struct dm_deferred_set *all_io_ds;
 
 	struct dm_thin_new_mapping *next_mapping;
 	mempool_t *mapping_pool;
@@ -660,8 +289,8 @@
 
 struct dm_thin_endio_hook {
 	struct thin_c *tc;
-	struct deferred_entry *shared_read_entry;
-	struct deferred_entry *all_io_entry;
+	struct dm_deferred_entry *shared_read_entry;
+	struct dm_deferred_entry *all_io_entry;
 	struct dm_thin_new_mapping *overwrite_mapping;
 };
 
@@ -877,7 +506,7 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&pool->lock, flags);
-	cell_release(cell, &pool->deferred_bios);
+	dm_cell_release(cell, &pool->deferred_bios);
 	spin_unlock_irqrestore(&tc->pool->lock, flags);
 
 	wake_worker(pool);
@@ -896,7 +525,7 @@
 	bio_list_init(&bios);
 
 	spin_lock_irqsave(&pool->lock, flags);
-	cell_release_no_holder(cell, &pool->deferred_bios);
+	dm_cell_release_no_holder(cell, &pool->deferred_bios);
 	spin_unlock_irqrestore(&pool->lock, flags);
 
 	wake_worker(pool);
@@ -906,7 +535,7 @@
 {
 	if (m->bio)
 		m->bio->bi_end_io = m->saved_bi_end_io;
-	cell_error(m->cell);
+	dm_cell_error(m->cell);
 	list_del(&m->list);
 	mempool_free(m, m->tc->pool->mapping_pool);
 }
@@ -921,7 +550,7 @@
 		bio->bi_end_io = m->saved_bi_end_io;
 
 	if (m->err) {
-		cell_error(m->cell);
+		dm_cell_error(m->cell);
 		goto out;
 	}
 
@@ -933,7 +562,7 @@
 	r = dm_thin_insert_block(tc->td, m->virt_block, m->data_block);
 	if (r) {
 		DMERR("dm_thin_insert_block() failed");
-		cell_error(m->cell);
+		dm_cell_error(m->cell);
 		goto out;
 	}
 
@@ -1067,7 +696,7 @@
 	m->err = 0;
 	m->bio = NULL;
 
-	if (!ds_add_work(&pool->shared_read_ds, &m->list))
+	if (!dm_deferred_set_add_work(pool->shared_read_ds, &m->list))
 		m->quiesced = 1;
 
 	/*
@@ -1099,7 +728,7 @@
 		if (r < 0) {
 			mempool_free(m, pool->mapping_pool);
 			DMERR("dm_kcopyd_copy() failed");
-			cell_error(cell);
+			dm_cell_error(cell);
 		}
 	}
 }
@@ -1164,7 +793,7 @@
 		if (r < 0) {
 			mempool_free(m, pool->mapping_pool);
 			DMERR("dm_kcopyd_zero() failed");
-			cell_error(cell);
+			dm_cell_error(cell);
 		}
 	}
 }
@@ -1276,7 +905,7 @@
 	struct bio_list bios;
 
 	bio_list_init(&bios);
-	cell_release(cell, &bios);
+	dm_cell_release(cell, &bios);
 
 	while ((bio = bio_list_pop(&bios)))
 		retry_on_resume(bio);
@@ -1288,13 +917,13 @@
 	unsigned long flags;
 	struct pool *pool = tc->pool;
 	struct dm_bio_prison_cell *cell, *cell2;
-	struct cell_key key, key2;
+	struct dm_cell_key key, key2;
 	dm_block_t block = get_bio_block(tc, bio);
 	struct dm_thin_lookup_result lookup_result;
 	struct dm_thin_new_mapping *m;
 
 	build_virtual_key(tc->td, block, &key);
-	if (bio_detain(tc->pool->prison, &key, bio, &cell))
+	if (dm_bio_detain(tc->pool->prison, &key, bio, &cell))
 		return;
 
 	r = dm_thin_find_block(tc->td, block, 1, &lookup_result);
@@ -1306,8 +935,8 @@
 		 * on this block.
 		 */
 		build_data_key(tc->td, lookup_result.block, &key2);
-		if (bio_detain(tc->pool->prison, &key2, bio, &cell2)) {
-			cell_release_singleton(cell, bio);
+		if (dm_bio_detain(tc->pool->prison, &key2, bio, &cell2)) {
+			dm_cell_release_singleton(cell, bio);
 			break;
 		}
 
@@ -1326,7 +955,7 @@
 			m->err = 0;
 			m->bio = bio;
 
-			if (!ds_add_work(&pool->all_io_ds, &m->list)) {
+			if (!dm_deferred_set_add_work(pool->all_io_ds, &m->list)) {
 				spin_lock_irqsave(&pool->lock, flags);
 				list_add(&m->list, &pool->prepared_discards);
 				spin_unlock_irqrestore(&pool->lock, flags);
@@ -1338,8 +967,8 @@
 			 * a block boundary.  So we submit the discard of a
 			 * partial block appropriately.
 			 */
-			cell_release_singleton(cell, bio);
-			cell_release_singleton(cell2, bio);
+			dm_cell_release_singleton(cell, bio);
+			dm_cell_release_singleton(cell2, bio);
 			if ((!lookup_result.shared) && pool->pf.discard_passdown)
 				remap_and_issue(tc, bio, lookup_result.block);
 			else
@@ -1351,20 +980,20 @@
 		/*
 		 * It isn't provisioned, just forget it.
 		 */
-		cell_release_singleton(cell, bio);
+		dm_cell_release_singleton(cell, bio);
 		bio_endio(bio, 0);
 		break;
 
 	default:
 		DMERR("discard: find block unexpectedly returned %d", r);
-		cell_release_singleton(cell, bio);
+		dm_cell_release_singleton(cell, bio);
 		bio_io_error(bio);
 		break;
 	}
 }
 
 static void break_sharing(struct thin_c *tc, struct bio *bio, dm_block_t block,
-			  struct cell_key *key,
+			  struct dm_cell_key *key,
 			  struct dm_thin_lookup_result *lookup_result,
 			  struct dm_bio_prison_cell *cell)
 {
@@ -1384,7 +1013,7 @@
 
 	default:
 		DMERR("%s: alloc_data_block() failed, error = %d", __func__, r);
-		cell_error(cell);
+		dm_cell_error(cell);
 		break;
 	}
 }
@@ -1395,14 +1024,14 @@
 {
 	struct dm_bio_prison_cell *cell;
 	struct pool *pool = tc->pool;
-	struct cell_key key;
+	struct dm_cell_key key;
 
 	/*
 	 * If cell is already occupied, then sharing is already in the process
 	 * of being broken so we have nothing further to do here.
 	 */
 	build_data_key(tc->td, lookup_result->block, &key);
-	if (bio_detain(pool->prison, &key, bio, &cell))
+	if (dm_bio_detain(pool->prison, &key, bio, &cell))
 		return;
 
 	if (bio_data_dir(bio) == WRITE && bio->bi_size)
@@ -1410,9 +1039,9 @@
 	else {
 		struct dm_thin_endio_hook *h = dm_get_mapinfo(bio)->ptr;
 
-		h->shared_read_entry = ds_inc(&pool->shared_read_ds);
+		h->shared_read_entry = dm_deferred_entry_inc(pool->shared_read_ds);
 
-		cell_release_singleton(cell, bio);
+		dm_cell_release_singleton(cell, bio);
 		remap_and_issue(tc, bio, lookup_result->block);
 	}
 }
@@ -1427,7 +1056,7 @@
 	 * Remap empty bios (flushes) immediately, without provisioning.
 	 */
 	if (!bio->bi_size) {
-		cell_release_singleton(cell, bio);
+		dm_cell_release_singleton(cell, bio);
 		remap_and_issue(tc, bio, 0);
 		return;
 	}
@@ -1437,7 +1066,7 @@
 	 */
 	if (bio_data_dir(bio) == READ) {
 		zero_fill_bio(bio);
-		cell_release_singleton(cell, bio);
+		dm_cell_release_singleton(cell, bio);
 		bio_endio(bio, 0);
 		return;
 	}
@@ -1458,7 +1087,7 @@
 	default:
 		DMERR("%s: alloc_data_block() failed, error = %d", __func__, r);
 		set_pool_mode(tc->pool, PM_READ_ONLY);
-		cell_error(cell);
+		dm_cell_error(cell);
 		break;
 	}
 }
@@ -1468,7 +1097,7 @@
 	int r;
 	dm_block_t block = get_bio_block(tc, bio);
 	struct dm_bio_prison_cell *cell;
-	struct cell_key key;
+	struct dm_cell_key key;
 	struct dm_thin_lookup_result lookup_result;
 
 	/*
@@ -1476,7 +1105,7 @@
 	 * being provisioned so we have nothing further to do here.
 	 */
 	build_virtual_key(tc->td, block, &key);
-	if (bio_detain(tc->pool->prison, &key, bio, &cell))
+	if (dm_bio_detain(tc->pool->prison, &key, bio, &cell))
 		return;
 
 	r = dm_thin_find_block(tc->td, block, 1, &lookup_result);
@@ -1491,7 +1120,7 @@
 		 * TODO: this will probably have to change when discard goes
 		 * back in.
 		 */
-		cell_release_singleton(cell, bio);
+		dm_cell_release_singleton(cell, bio);
 
 		if (lookup_result.shared)
 			process_shared_bio(tc, bio, block, &lookup_result);
@@ -1501,7 +1130,7 @@
 
 	case -ENODATA:
 		if (bio_data_dir(bio) == READ && tc->origin_dev) {
-			cell_release_singleton(cell, bio);
+			dm_cell_release_singleton(cell, bio);
 			remap_to_origin_and_issue(tc, bio);
 		} else
 			provision_block(tc, bio, block, cell);
@@ -1509,7 +1138,7 @@
 
 	default:
 		DMERR("dm_thin_find_block() failed, error = %d", r);
-		cell_release_singleton(cell, bio);
+		dm_cell_release_singleton(cell, bio);
 		bio_io_error(bio);
 		break;
 	}
@@ -1718,7 +1347,7 @@
 
 	h->tc = tc;
 	h->shared_read_entry = NULL;
-	h->all_io_entry = bio->bi_rw & REQ_DISCARD ? NULL : ds_inc(&pool->all_io_ds);
+	h->all_io_entry = bio->bi_rw & REQ_DISCARD ? NULL : dm_deferred_entry_inc(pool->all_io_ds);
 	h->overwrite_mapping = NULL;
 
 	return h;
@@ -1928,7 +1557,7 @@
 	if (dm_pool_metadata_close(pool->pmd) < 0)
 		DMWARN("%s: dm_pool_metadata_close() failed.", __func__);
 
-	prison_destroy(pool->prison);
+	dm_bio_prison_destroy(pool->prison);
 	dm_kcopyd_client_destroy(pool->copier);
 
 	if (pool->wq)
@@ -1938,6 +1567,8 @@
 		mempool_free(pool->next_mapping, pool->mapping_pool);
 	mempool_destroy(pool->mapping_pool);
 	mempool_destroy(pool->endio_hook_pool);
+	dm_deferred_set_destroy(pool->shared_read_ds);
+	dm_deferred_set_destroy(pool->all_io_ds);
 	kfree(pool);
 }
 
@@ -1976,7 +1607,7 @@
 		pool->sectors_per_block_shift = __ffs(block_size);
 	pool->low_water_blocks = 0;
 	pool_features_init(&pool->pf);
-	pool->prison = prison_create(PRISON_CELLS);
+	pool->prison = dm_bio_prison_create(PRISON_CELLS);
 	if (!pool->prison) {
 		*error = "Error creating pool's bio prison";
 		err_p = ERR_PTR(-ENOMEM);
@@ -2012,8 +1643,20 @@
 	pool->low_water_triggered = 0;
 	pool->no_free_space = 0;
 	bio_list_init(&pool->retry_on_resume_list);
-	ds_init(&pool->shared_read_ds);
-	ds_init(&pool->all_io_ds);
+
+	pool->shared_read_ds = dm_deferred_set_create();
+	if (!pool->shared_read_ds) {
+		*error = "Error creating pool's shared read deferred set";
+		err_p = ERR_PTR(-ENOMEM);
+		goto bad_shared_read_ds;
+	}
+
+	pool->all_io_ds = dm_deferred_set_create();
+	if (!pool->all_io_ds) {
+		*error = "Error creating pool's all io deferred set";
+		err_p = ERR_PTR(-ENOMEM);
+		goto bad_all_io_ds;
+	}
 
 	pool->next_mapping = NULL;
 	pool->mapping_pool = mempool_create_slab_pool(MAPPING_POOL_SIZE,
@@ -2042,11 +1685,15 @@
 bad_endio_hook_pool:
 	mempool_destroy(pool->mapping_pool);
 bad_mapping_pool:
+	dm_deferred_set_destroy(pool->all_io_ds);
+bad_all_io_ds:
+	dm_deferred_set_destroy(pool->shared_read_ds);
+bad_shared_read_ds:
 	destroy_workqueue(pool->wq);
 bad_wq:
 	dm_kcopyd_client_destroy(pool->copier);
 bad_kcopyd_client:
-	prison_destroy(pool->prison);
+	dm_bio_prison_destroy(pool->prison);
 bad_prison:
 	kfree(pool);
 bad_pool:
@@ -2272,15 +1919,6 @@
 		goto out_flags_changed;
 	}
 
-	/*
-	 * The block layer requires discard_granularity to be a power of 2.
-	 */
-	if (pf.discard_enabled && !is_power_of_2(block_size)) {
-		ti->error = "Discard support must be disabled when the block size is not a power of 2";
-		r = -EINVAL;
-		goto out_flags_changed;
-	}
-
 	pt->pool = pool;
 	pt->ti = ti;
 	pt->metadata_dev = metadata_dev;
@@ -2762,6 +2400,11 @@
 	return min(max_size, q->merge_bvec_fn(q, bvm, biovec));
 }
 
+static bool block_size_is_power_of_two(struct pool *pool)
+{
+	return pool->sectors_per_block_shift >= 0;
+}
+
 static void set_discard_limits(struct pool_c *pt, struct queue_limits *limits)
 {
 	struct pool *pool = pt->pool;
@@ -2775,8 +2418,15 @@
 	if (pt->adjusted_pf.discard_passdown) {
 		data_limits = &bdev_get_queue(pt->data_dev->bdev)->limits;
 		limits->discard_granularity = data_limits->discard_granularity;
-	} else
+	} else if (block_size_is_power_of_two(pool))
 		limits->discard_granularity = pool->sectors_per_block << SECTOR_SHIFT;
+	else
+		/*
+		 * Use largest power of 2 that is a factor of sectors_per_block
+		 * but at least DATA_DEV_BLOCK_SIZE_MIN_SECTORS.
+		 */
+		limits->discard_granularity = max(1 << (ffs(pool->sectors_per_block) - 1),
+						  DATA_DEV_BLOCK_SIZE_MIN_SECTORS) << SECTOR_SHIFT;
 }
 
 static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits)
@@ -2804,7 +2454,7 @@
 	.name = "thin-pool",
 	.features = DM_TARGET_SINGLETON | DM_TARGET_ALWAYS_WRITEABLE |
 		    DM_TARGET_IMMUTABLE,
-	.version = {1, 4, 0},
+	.version = {1, 5, 0},
 	.module = THIS_MODULE,
 	.ctr = pool_ctr,
 	.dtr = pool_dtr,
@@ -2979,7 +2629,7 @@
 
 	if (h->shared_read_entry) {
 		INIT_LIST_HEAD(&work);
-		ds_dec(h->shared_read_entry, &work);
+		dm_deferred_entry_dec(h->shared_read_entry, &work);
 
 		spin_lock_irqsave(&pool->lock, flags);
 		list_for_each_entry_safe(m, tmp, &work, list) {
@@ -2992,7 +2642,7 @@
 
 	if (h->all_io_entry) {
 		INIT_LIST_HEAD(&work);
-		ds_dec(h->all_io_entry, &work);
+		dm_deferred_entry_dec(h->all_io_entry, &work);
 		spin_lock_irqsave(&pool->lock, flags);
 		list_for_each_entry_safe(m, tmp, &work, list)
 			list_add(&m->list, &pool->prepared_discards);
@@ -3095,7 +2745,7 @@
 
 static struct target_type thin_target = {
 	.name = "thin",
-	.version = {1, 4, 0},
+	.version = {1, 5, 0},
 	.module	= THIS_MODULE,
 	.ctr = thin_ctr,
 	.dtr = thin_dtr,
@@ -3125,10 +2775,6 @@
 
 	r = -ENOMEM;
 
-	_cell_cache = KMEM_CACHE(dm_bio_prison_cell, 0);
-	if (!_cell_cache)
-		goto bad_cell_cache;
-
 	_new_mapping_cache = KMEM_CACHE(dm_thin_new_mapping, 0);
 	if (!_new_mapping_cache)
 		goto bad_new_mapping_cache;
@@ -3142,8 +2788,6 @@
 bad_endio_hook_cache:
 	kmem_cache_destroy(_new_mapping_cache);
 bad_new_mapping_cache:
-	kmem_cache_destroy(_cell_cache);
-bad_cell_cache:
 	dm_unregister_target(&pool_target);
 bad_pool_target:
 	dm_unregister_target(&thin_target);
@@ -3156,7 +2800,6 @@
 	dm_unregister_target(&thin_target);
 	dm_unregister_target(&pool_target);
 
-	kmem_cache_destroy(_cell_cache);
 	kmem_cache_destroy(_new_mapping_cache);
 	kmem_cache_destroy(_endio_hook_cache);
 }
diff --git a/drivers/md/dm-verity.c b/drivers/md/dm-verity.c
index 892ae27..9e7328b 100644
--- a/drivers/md/dm-verity.c
+++ b/drivers/md/dm-verity.c
@@ -438,7 +438,7 @@
 		verity_hash_at_level(v, io->block, i, &hash_block_start, NULL);
 		verity_hash_at_level(v, io->block + io->n_blocks - 1, i, &hash_block_end, NULL);
 		if (!i) {
-			unsigned cluster = *(volatile unsigned *)&dm_verity_prefetch_cluster;
+			unsigned cluster = ACCESS_ONCE(dm_verity_prefetch_cluster);
 
 			cluster >>= v->data_dev_block_bits;
 			if (unlikely(!cluster))
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 66ceaff..02db918 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -71,6 +71,7 @@
 	struct dm_io *io;
 	struct dm_target *ti;
 	union map_info info;
+	struct bio clone;
 };
 
 /*
@@ -214,7 +215,6 @@
 
 #define MIN_IOS 256
 static struct kmem_cache *_io_cache;
-static struct kmem_cache *_tio_cache;
 static struct kmem_cache *_rq_tio_cache;
 
 /*
@@ -232,14 +232,9 @@
 	if (!_io_cache)
 		return r;
 
-	/* allocate a slab for the target ios */
-	_tio_cache = KMEM_CACHE(dm_target_io, 0);
-	if (!_tio_cache)
-		goto out_free_io_cache;
-
 	_rq_tio_cache = KMEM_CACHE(dm_rq_target_io, 0);
 	if (!_rq_tio_cache)
-		goto out_free_tio_cache;
+		goto out_free_io_cache;
 
 	_rq_bio_info_cache = KMEM_CACHE(dm_rq_clone_bio_info, 0);
 	if (!_rq_bio_info_cache)
@@ -265,8 +260,6 @@
 	kmem_cache_destroy(_rq_bio_info_cache);
 out_free_rq_tio_cache:
 	kmem_cache_destroy(_rq_tio_cache);
-out_free_tio_cache:
-	kmem_cache_destroy(_tio_cache);
 out_free_io_cache:
 	kmem_cache_destroy(_io_cache);
 
@@ -277,7 +270,6 @@
 {
 	kmem_cache_destroy(_rq_bio_info_cache);
 	kmem_cache_destroy(_rq_tio_cache);
-	kmem_cache_destroy(_tio_cache);
 	kmem_cache_destroy(_io_cache);
 	unregister_blkdev(_major, _name);
 	dm_uevent_exit();
@@ -463,7 +455,7 @@
 
 static void free_tio(struct mapped_device *md, struct dm_target_io *tio)
 {
-	mempool_free(tio, md->tio_pool);
+	bio_put(&tio->clone);
 }
 
 static struct dm_rq_target_io *alloc_rq_tio(struct mapped_device *md,
@@ -682,7 +674,6 @@
 	}
 
 	free_tio(md, tio);
-	bio_put(bio);
 	dec_pending(io, error);
 }
 
@@ -1002,12 +993,12 @@
 }
 EXPORT_SYMBOL_GPL(dm_set_target_max_io_len);
 
-static void __map_bio(struct dm_target *ti, struct bio *clone,
-		      struct dm_target_io *tio)
+static void __map_bio(struct dm_target *ti, struct dm_target_io *tio)
 {
 	int r;
 	sector_t sector;
 	struct mapped_device *md;
+	struct bio *clone = &tio->clone;
 
 	clone->bi_end_io = clone_endio;
 	clone->bi_private = tio;
@@ -1031,7 +1022,6 @@
 		/* error the io and bail out, or requeue it if needed */
 		md = tio->io->md;
 		dec_pending(tio->io, r);
-		bio_put(clone);
 		free_tio(md, tio);
 	} else if (r) {
 		DMWARN("unimplemented target map return value: %d", r);
@@ -1052,14 +1042,13 @@
 /*
  * Creates a little bio that just does part of a bvec.
  */
-static struct bio *split_bvec(struct bio *bio, sector_t sector,
-			      unsigned short idx, unsigned int offset,
-			      unsigned int len, struct bio_set *bs)
+static void split_bvec(struct dm_target_io *tio, struct bio *bio,
+		       sector_t sector, unsigned short idx, unsigned int offset,
+		       unsigned int len, struct bio_set *bs)
 {
-	struct bio *clone;
+	struct bio *clone = &tio->clone;
 	struct bio_vec *bv = bio->bi_io_vec + idx;
 
-	clone = bio_alloc_bioset(GFP_NOIO, 1, bs);
 	*clone->bi_io_vec = *bv;
 
 	clone->bi_sector = sector;
@@ -1076,20 +1065,18 @@
 		bio_integrity_trim(clone,
 				   bio_sector_offset(bio, idx, offset), len);
 	}
-
-	return clone;
 }
 
 /*
  * Creates a bio that consists of range of complete bvecs.
  */
-static struct bio *clone_bio(struct bio *bio, sector_t sector,
-			     unsigned short idx, unsigned short bv_count,
-			     unsigned int len, struct bio_set *bs)
+static void clone_bio(struct dm_target_io *tio, struct bio *bio,
+		      sector_t sector, unsigned short idx,
+		      unsigned short bv_count, unsigned int len,
+		      struct bio_set *bs)
 {
-	struct bio *clone;
+	struct bio *clone = &tio->clone;
 
-	clone = bio_alloc_bioset(GFP_NOIO, bio->bi_max_vecs, bs);
 	__bio_clone(clone, bio);
 	clone->bi_sector = sector;
 	clone->bi_idx = idx;
@@ -1104,14 +1091,16 @@
 			bio_integrity_trim(clone,
 					   bio_sector_offset(bio, idx, 0), len);
 	}
-
-	return clone;
 }
 
 static struct dm_target_io *alloc_tio(struct clone_info *ci,
-				      struct dm_target *ti)
+				      struct dm_target *ti, int nr_iovecs)
 {
-	struct dm_target_io *tio = mempool_alloc(ci->md->tio_pool, GFP_NOIO);
+	struct dm_target_io *tio;
+	struct bio *clone;
+
+	clone = bio_alloc_bioset(GFP_NOIO, nr_iovecs, ci->md->bs);
+	tio = container_of(clone, struct dm_target_io, clone);
 
 	tio->io = ci->io;
 	tio->ti = ti;
@@ -1123,8 +1112,8 @@
 static void __issue_target_request(struct clone_info *ci, struct dm_target *ti,
 				   unsigned request_nr, sector_t len)
 {
-	struct dm_target_io *tio = alloc_tio(ci, ti);
-	struct bio *clone;
+	struct dm_target_io *tio = alloc_tio(ci, ti, ci->bio->bi_max_vecs);
+	struct bio *clone = &tio->clone;
 
 	tio->info.target_request_nr = request_nr;
 
@@ -1133,14 +1122,14 @@
 	 * ci->bio->bi_max_vecs is BIO_INLINE_VECS anyway, for both flush
 	 * and discard, so no need for concern about wasted bvec allocations.
 	 */
-	clone = bio_clone_bioset(ci->bio, GFP_NOIO, ci->md->bs);
 
+	 __bio_clone(clone, ci->bio);
 	if (len) {
 		clone->bi_sector = ci->sector;
 		clone->bi_size = to_bytes(len);
 	}
 
-	__map_bio(ti, clone, tio);
+	__map_bio(ti, tio);
 }
 
 static void __issue_target_requests(struct clone_info *ci, struct dm_target *ti,
@@ -1169,14 +1158,13 @@
  */
 static void __clone_and_map_simple(struct clone_info *ci, struct dm_target *ti)
 {
-	struct bio *clone, *bio = ci->bio;
+	struct bio *bio = ci->bio;
 	struct dm_target_io *tio;
 
-	tio = alloc_tio(ci, ti);
-	clone = clone_bio(bio, ci->sector, ci->idx,
-			  bio->bi_vcnt - ci->idx, ci->sector_count,
-			  ci->md->bs);
-	__map_bio(ti, clone, tio);
+	tio = alloc_tio(ci, ti, bio->bi_max_vecs);
+	clone_bio(tio, bio, ci->sector, ci->idx, bio->bi_vcnt - ci->idx,
+		  ci->sector_count, ci->md->bs);
+	__map_bio(ti, tio);
 	ci->sector_count = 0;
 }
 
@@ -1214,7 +1202,7 @@
 
 static int __clone_and_map(struct clone_info *ci)
 {
-	struct bio *clone, *bio = ci->bio;
+	struct bio *bio = ci->bio;
 	struct dm_target *ti;
 	sector_t len = 0, max;
 	struct dm_target_io *tio;
@@ -1254,10 +1242,10 @@
 			len += bv_len;
 		}
 
-		tio = alloc_tio(ci, ti);
-		clone = clone_bio(bio, ci->sector, ci->idx, i - ci->idx, len,
-				  ci->md->bs);
-		__map_bio(ti, clone, tio);
+		tio = alloc_tio(ci, ti, bio->bi_max_vecs);
+		clone_bio(tio, bio, ci->sector, ci->idx, i - ci->idx, len,
+			  ci->md->bs);
+		__map_bio(ti, tio);
 
 		ci->sector += len;
 		ci->sector_count -= len;
@@ -1282,12 +1270,11 @@
 
 			len = min(remaining, max);
 
-			tio = alloc_tio(ci, ti);
-			clone = split_bvec(bio, ci->sector, ci->idx,
-					   bv->bv_offset + offset, len,
-					   ci->md->bs);
+			tio = alloc_tio(ci, ti, 1);
+			split_bvec(tio, bio, ci->sector, ci->idx,
+				   bv->bv_offset + offset, len, ci->md->bs);
 
-			__map_bio(ti, clone, tio);
+			__map_bio(ti, tio);
 
 			ci->sector += len;
 			ci->sector_count -= len;
@@ -1955,7 +1942,7 @@
 {
 	struct dm_md_mempools *p;
 
-	if (md->io_pool && md->tio_pool && md->bs)
+	if (md->io_pool && (md->tio_pool || dm_table_get_type(t) == DM_TYPE_BIO_BASED) && md->bs)
 		/* the md already has necessary mempools */
 		goto out;
 
@@ -2732,14 +2719,16 @@
 	if (!pools->io_pool)
 		goto free_pools_and_out;
 
-	pools->tio_pool = (type == DM_TYPE_BIO_BASED) ?
-			  mempool_create_slab_pool(MIN_IOS, _tio_cache) :
-			  mempool_create_slab_pool(MIN_IOS, _rq_tio_cache);
-	if (!pools->tio_pool)
-		goto free_io_pool_and_out;
+	pools->tio_pool = NULL;
+	if (type == DM_TYPE_REQUEST_BASED) {
+		pools->tio_pool = mempool_create_slab_pool(MIN_IOS, _rq_tio_cache);
+		if (!pools->tio_pool)
+			goto free_io_pool_and_out;
+	}
 
 	pools->bs = (type == DM_TYPE_BIO_BASED) ?
-		bioset_create(pool_size, 0) :
+		bioset_create(pool_size,
+			      offsetof(struct dm_target_io, clone)) :
 		bioset_create(pool_size,
 			      offsetof(struct dm_rq_clone_bio_info, clone));
 	if (!pools->bs)
@@ -2754,7 +2743,8 @@
 	bioset_free(pools->bs);
 
 free_tio_pool_and_out:
-	mempool_destroy(pools->tio_pool);
+	if (pools->tio_pool)
+		mempool_destroy(pools->tio_pool);
 
 free_io_pool_and_out:
 	mempool_destroy(pools->io_pool);
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index fa211d8..2101483 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -138,6 +138,7 @@
 	struct linear_conf *conf;
 	struct md_rdev *rdev;
 	int i, cnt;
+	bool discard_supported = false;
 
 	conf = kzalloc (sizeof (*conf) + raid_disks*sizeof(struct dev_info),
 			GFP_KERNEL);
@@ -171,6 +172,8 @@
 		conf->array_sectors += rdev->sectors;
 		cnt++;
 
+		if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+			discard_supported = true;
 	}
 	if (cnt != raid_disks) {
 		printk(KERN_ERR "md/linear:%s: not enough drives present. Aborting!\n",
@@ -178,6 +181,11 @@
 		goto out;
 	}
 
+	if (!discard_supported)
+		queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+	else
+		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+
 	/*
 	 * Here we calculate the device offsets.
 	 */
@@ -244,7 +252,9 @@
 	if (!newconf)
 		return -ENOMEM;
 
-	oldconf = rcu_dereference(mddev->private);
+	oldconf = rcu_dereference_protected(mddev->private,
+					    lockdep_is_held(
+						    &mddev->reconfig_mutex));
 	mddev->raid_disks++;
 	rcu_assign_pointer(mddev->private, newconf);
 	md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
@@ -256,7 +266,10 @@
 
 static int linear_stop (struct mddev *mddev)
 {
-	struct linear_conf *conf = mddev->private;
+	struct linear_conf *conf =
+		rcu_dereference_protected(mddev->private,
+					  lockdep_is_held(
+						  &mddev->reconfig_mutex));
 
 	/*
 	 * We do not require rcu protection here since
@@ -326,6 +339,14 @@
 	bio->bi_sector = bio->bi_sector - start_sector
 		+ tmp_dev->rdev->data_offset;
 	rcu_read_unlock();
+
+	if (unlikely((bio->bi_rw & REQ_DISCARD) &&
+		     !blk_queue_discard(bdev_get_queue(bio->bi_bdev)))) {
+		/* Just ignore it */
+		bio_endio(bio, 0);
+		return;
+	}
+
 	generic_make_request(bio);
 }
 
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 95c8801..9ab768a 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -674,7 +674,18 @@
 	return NULL;
 }
 
-static struct md_rdev * find_rdev(struct mddev * mddev, dev_t dev)
+static struct md_rdev *find_rdev_nr_rcu(struct mddev *mddev, int nr)
+{
+	struct md_rdev *rdev;
+
+	rdev_for_each_rcu(rdev, mddev)
+		if (rdev->desc_nr == nr)
+			return rdev;
+
+	return NULL;
+}
+
+static struct md_rdev *find_rdev(struct mddev *mddev, dev_t dev)
 {
 	struct md_rdev *rdev;
 
@@ -685,6 +696,17 @@
 	return NULL;
 }
 
+static struct md_rdev *find_rdev_rcu(struct mddev *mddev, dev_t dev)
+{
+	struct md_rdev *rdev;
+
+	rdev_for_each_rcu(rdev, mddev)
+		if (rdev->bdev->bd_dev == dev)
+			return rdev;
+
+	return NULL;
+}
+
 static struct md_personality *find_pers(int level, char *clevel)
 {
 	struct md_personality *pers;
@@ -2022,8 +2044,14 @@
 /* Disable data integrity if non-capable/non-matching disk is being added */
 void md_integrity_add_rdev(struct md_rdev *rdev, struct mddev *mddev)
 {
-	struct blk_integrity *bi_rdev = bdev_get_integrity(rdev->bdev);
-	struct blk_integrity *bi_mddev = blk_get_integrity(mddev->gendisk);
+	struct blk_integrity *bi_rdev;
+	struct blk_integrity *bi_mddev;
+
+	if (!mddev->gendisk)
+		return;
+
+	bi_rdev = bdev_get_integrity(rdev->bdev);
+	bi_mddev = blk_get_integrity(mddev->gendisk);
 
 	if (!bi_mddev) /* nothing to do */
 		return;
@@ -3754,6 +3782,8 @@
 		return -EINVAL;
 
 	mddev->recovery_cp = n;
+	if (mddev->pers)
+		set_bit(MD_CHANGE_CLEAN, &mddev->flags);
 	return len;
 }
 static struct md_sysfs_entry md_resync_start =
@@ -4231,6 +4261,13 @@
 		set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
 		set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
 	}
+	if (mddev->ro == 2) {
+		/* A write to sync_action is enough to justify
+		 * canceling read-auto mode
+		 */
+		mddev->ro = 0;
+		md_wakeup_thread(mddev->sync_thread);
+	}
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 	md_wakeup_thread(mddev->thread);
 	sysfs_notify_dirent_safe(mddev->sysfs_action);
@@ -4241,7 +4278,8 @@
 mismatch_cnt_show(struct mddev *mddev, char *page)
 {
 	return sprintf(page, "%llu\n",
-		       (unsigned long long) mddev->resync_mismatches);
+		       (unsigned long long)
+		       atomic64_read(&mddev->resync_mismatches));
 }
 
 static struct md_sysfs_entry md_scan_mode =
@@ -4362,6 +4400,10 @@
 	if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
 		return sprintf(page, "none\n");
 
+	if (mddev->curr_resync == 1 ||
+	    mddev->curr_resync == 2)
+		return sprintf(page, "delayed\n");
+
 	if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ||
 	    test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
 		max_sectors = mddev->resync_max_sectors;
@@ -5207,7 +5249,7 @@
 	mddev->new_layout = 0;
 	mddev->new_chunk_sectors = 0;
 	mddev->curr_resync = 0;
-	mddev->resync_mismatches = 0;
+	atomic64_set(&mddev->resync_mismatches, 0);
 	mddev->suspend_lo = mddev->suspend_hi = 0;
 	mddev->sync_speed_min = mddev->sync_speed_max = 0;
 	mddev->recovery = 0;
@@ -5509,8 +5551,9 @@
 	int nr,working,insync,failed,spare;
 	struct md_rdev *rdev;
 
-	nr=working=insync=failed=spare=0;
-	rdev_for_each(rdev, mddev) {
+	nr = working = insync = failed = spare = 0;
+	rcu_read_lock();
+	rdev_for_each_rcu(rdev, mddev) {
 		nr++;
 		if (test_bit(Faulty, &rdev->flags))
 			failed++;
@@ -5522,6 +5565,7 @@
 				spare++;
 		}
 	}
+	rcu_read_unlock();
 
 	info.major_version = mddev->major_version;
 	info.minor_version = mddev->minor_version;
@@ -5605,7 +5649,8 @@
 	if (copy_from_user(&info, arg, sizeof(info)))
 		return -EFAULT;
 
-	rdev = find_rdev_nr(mddev, info.number);
+	rcu_read_lock();
+	rdev = find_rdev_nr_rcu(mddev, info.number);
 	if (rdev) {
 		info.major = MAJOR(rdev->bdev->bd_dev);
 		info.minor = MINOR(rdev->bdev->bd_dev);
@@ -5624,6 +5669,7 @@
 		info.raid_disk = -1;
 		info.state = (1<<MD_DISK_REMOVED);
 	}
+	rcu_read_unlock();
 
 	if (copy_to_user(arg, &info, sizeof(info)))
 		return -EFAULT;
@@ -6232,18 +6278,22 @@
 static int set_disk_faulty(struct mddev *mddev, dev_t dev)
 {
 	struct md_rdev *rdev;
+	int err = 0;
 
 	if (mddev->pers == NULL)
 		return -ENODEV;
 
-	rdev = find_rdev(mddev, dev);
+	rcu_read_lock();
+	rdev = find_rdev_rcu(mddev, dev);
 	if (!rdev)
-		return -ENODEV;
-
-	md_error(mddev, rdev);
-	if (!test_bit(Faulty, &rdev->flags))
-		return -EBUSY;
-	return 0;
+		err =  -ENODEV;
+	else {
+		md_error(mddev, rdev);
+		if (!test_bit(Faulty, &rdev->flags))
+			err = -EBUSY;
+	}
+	rcu_read_unlock();
+	return err;
 }
 
 /*
@@ -6315,6 +6365,27 @@
 		goto abort;
 	}
 
+	/* Some actions do not requires the mutex */
+	switch (cmd) {
+	case GET_ARRAY_INFO:
+		if (!mddev->raid_disks && !mddev->external)
+			err = -ENODEV;
+		else
+			err = get_array_info(mddev, argp);
+		goto abort;
+
+	case GET_DISK_INFO:
+		if (!mddev->raid_disks && !mddev->external)
+			err = -ENODEV;
+		else
+			err = get_disk_info(mddev, argp);
+		goto abort;
+
+	case SET_DISK_FAULTY:
+		err = set_disk_faulty(mddev, new_decode_dev(arg));
+		goto abort;
+	}
+
 	err = mddev_lock(mddev);
 	if (err) {
 		printk(KERN_INFO 
@@ -6387,18 +6458,10 @@
 	 */
 	switch (cmd)
 	{
-		case GET_ARRAY_INFO:
-			err = get_array_info(mddev, argp);
-			goto done_unlock;
-
 		case GET_BITMAP_FILE:
 			err = get_bitmap_file(mddev, argp);
 			goto done_unlock;
 
-		case GET_DISK_INFO:
-			err = get_disk_info(mddev, argp);
-			goto done_unlock;
-
 		case RESTART_ARRAY_RW:
 			err = restart_array(mddev);
 			goto done_unlock;
@@ -6480,10 +6543,6 @@
 			err = hot_add_disk(mddev, new_decode_dev(arg));
 			goto done_unlock;
 
-		case SET_DISK_FAULTY:
-			err = set_disk_faulty(mddev, new_decode_dev(arg));
-			goto done_unlock;
-
 		case RUN_ARRAY:
 			err = do_md_run(mddev);
 			goto done_unlock;
@@ -6641,7 +6700,7 @@
 
 		clear_bit(THREAD_WAKEUP, &thread->flags);
 		if (!kthread_should_stop())
-			thread->run(thread->mddev);
+			thread->run(thread);
 	}
 
 	return 0;
@@ -6656,8 +6715,8 @@
 	}
 }
 
-struct md_thread *md_register_thread(void (*run) (struct mddev *), struct mddev *mddev,
-				 const char *name)
+struct md_thread *md_register_thread(void (*run) (struct md_thread *),
+		struct mddev *mddev, const char *name)
 {
 	struct md_thread *thread;
 
@@ -6752,7 +6811,11 @@
 	int scale;
 	unsigned int per_milli;
 
-	resync = mddev->curr_resync - atomic_read(&mddev->recovery_active);
+	if (mddev->curr_resync <= 3)
+		resync = 0;
+	else
+		resync = mddev->curr_resync
+			- atomic_read(&mddev->recovery_active);
 
 	if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ||
 	    test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
@@ -6978,7 +7041,7 @@
 				if (mddev->curr_resync > 2) {
 					status_resync(seq, mddev);
 					seq_printf(seq, "\n      ");
-				} else if (mddev->curr_resync == 1 || mddev->curr_resync == 2)
+				} else if (mddev->curr_resync >= 1)
 					seq_printf(seq, "\tresync=DELAYED\n      ");
 				else if (mddev->recovery_cp < MaxSector)
 					seq_printf(seq, "\tresync=PENDING\n      ");
@@ -7206,8 +7269,9 @@
 
 #define SYNC_MARKS	10
 #define	SYNC_MARK_STEP	(3*HZ)
-void md_do_sync(struct mddev *mddev)
+void md_do_sync(struct md_thread *thread)
 {
+	struct mddev *mddev = thread->mddev;
 	struct mddev *mddev2;
 	unsigned int currspeed = 0,
 		 window;
@@ -7311,7 +7375,7 @@
 		 * which defaults to physical size, but can be virtual size
 		 */
 		max_sectors = mddev->resync_max_sectors;
-		mddev->resync_mismatches = 0;
+		atomic64_set(&mddev->resync_mismatches, 0);
 		/* we don't use the checkpoint if there's a bitmap */
 		if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery))
 			j = mddev->resync_min;
@@ -7367,8 +7431,11 @@
 		       "md: resuming %s of %s from checkpoint.\n",
 		       desc, mdname(mddev));
 		mddev->curr_resync = j;
-	}
+	} else
+		mddev->curr_resync = 3; /* no longer delayed */
 	mddev->curr_resync_completed = j;
+	sysfs_notify(&mddev->kobj, NULL, "sync_completed");
+	md_new_event(mddev);
 
 	blk_start_plug(&plug);
 	while (j < max_sectors) {
@@ -7421,7 +7488,8 @@
 			break;
 
 		j += sectors;
-		if (j>1) mddev->curr_resync = j;
+		if (j > 2)
+			mddev->curr_resync = j;
 		mddev->curr_mark_cnt = io_sectors;
 		if (last_check == 0)
 			/* this is the earliest that rebuild will be
@@ -7543,8 +7611,6 @@
 	int spares = 0;
 	int removed = 0;
 
-	mddev->curr_resync_completed = 0;
-
 	rdev_for_each(rdev, mddev)
 		if (rdev->raid_disk >= 0 &&
 		    !test_bit(Blocked, &rdev->flags) &&
@@ -7739,6 +7805,7 @@
 		/* Set RUNNING before clearing NEEDED to avoid
 		 * any transients in the value of "sync_action".
 		 */
+		mddev->curr_resync_completed = 0;
 		set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
 		/* Clear some bits that don't mean anything, but
 		 * might be left set
@@ -7752,7 +7819,7 @@
 		/* no recovery is running.
 		 * remove any failed drives, then
 		 * add spares if possible.
-		 * Spare are also removed and re-added, to allow
+		 * Spares are also removed and re-added, to allow
 		 * the personality to fail the re-add.
 		 */
 
diff --git a/drivers/md/md.h b/drivers/md/md.h
index f385b03..af443ab 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -282,7 +282,7 @@
 
 	sector_t			resync_max_sectors; /* may be set by personality */
 
-	sector_t			resync_mismatches; /* count of sectors where
+	atomic64_t			resync_mismatches; /* count of sectors where
 							    * parity/replica mismatch found
 							    */
 
@@ -540,12 +540,13 @@
 	list_for_each_entry_rcu(rdev, &((mddev)->disks), same_set)
 
 struct md_thread {
-	void			(*run) (struct mddev *mddev);
+	void			(*run) (struct md_thread *thread);
 	struct mddev		*mddev;
 	wait_queue_head_t	wqueue;
 	unsigned long           flags;
 	struct task_struct	*tsk;
 	unsigned long		timeout;
+	void			*private;
 };
 
 #define THREAD_WAKEUP  0
@@ -584,7 +585,7 @@
 extern int register_md_personality(struct md_personality *p);
 extern int unregister_md_personality(struct md_personality *p);
 extern struct md_thread *md_register_thread(
-	void (*run)(struct mddev *mddev),
+	void (*run)(struct md_thread *thread),
 	struct mddev *mddev,
 	const char *name);
 extern void md_unregister_thread(struct md_thread **threadp);
@@ -603,7 +604,7 @@
 extern void md_super_wait(struct mddev *mddev);
 extern int sync_page_io(struct md_rdev *rdev, sector_t sector, int size, 
 			struct page *page, int rw, bool metadata_op);
-extern void md_do_sync(struct mddev *mddev);
+extern void md_do_sync(struct md_thread *thread);
 extern void md_new_event(struct mddev *mddev);
 extern int md_allow_write(struct mddev *mddev);
 extern void md_wait_for_blocked_rdev(struct md_rdev *rdev, struct mddev *mddev);
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 61a1833..1642eae 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -335,8 +335,9 @@
  *	3.	Performs writes following reads for array syncronising.
  */
 
-static void multipathd (struct mddev *mddev)
+static void multipathd(struct md_thread *thread)
 {
+	struct mddev *mddev = thread->mddev;
 	struct multipath_bh *mp_bh;
 	struct bio *bio;
 	unsigned long flags;
diff --git a/drivers/md/persistent-data/dm-space-map-common.c b/drivers/md/persistent-data/dm-space-map-common.c
index d77602d..f3a9af8 100644
--- a/drivers/md/persistent-data/dm-space-map-common.c
+++ b/drivers/md/persistent-data/dm-space-map-common.c
@@ -434,14 +434,14 @@
 	if (ref_count && !old) {
 		*ev = SM_ALLOC;
 		ll->nr_allocated++;
-		ie_disk.nr_free = cpu_to_le32(le32_to_cpu(ie_disk.nr_free) - 1);
+		le32_add_cpu(&ie_disk.nr_free, -1);
 		if (le32_to_cpu(ie_disk.none_free_before) == bit)
 			ie_disk.none_free_before = cpu_to_le32(bit + 1);
 
 	} else if (old && !ref_count) {
 		*ev = SM_FREE;
 		ll->nr_allocated--;
-		ie_disk.nr_free = cpu_to_le32(le32_to_cpu(ie_disk.nr_free) + 1);
+		le32_add_cpu(&ie_disk.nr_free, 1);
 		ie_disk.none_free_before = cpu_to_le32(min(le32_to_cpu(ie_disk.none_free_before), bit));
 	}
 
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index a9e4fa9..24b3597 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -88,6 +88,7 @@
 	char b[BDEVNAME_SIZE];
 	char b2[BDEVNAME_SIZE];
 	struct r0conf *conf = kzalloc(sizeof(*conf), GFP_KERNEL);
+	bool discard_supported = false;
 
 	if (!conf)
 		return -ENOMEM;
@@ -195,6 +196,9 @@
 		if (!smallest || (rdev1->sectors < smallest->sectors))
 			smallest = rdev1;
 		cnt++;
+
+		if (blk_queue_discard(bdev_get_queue(rdev1->bdev)))
+			discard_supported = true;
 	}
 	if (cnt != mddev->raid_disks) {
 		printk(KERN_ERR "md/raid0:%s: too few disks (%d of %d) - "
@@ -272,6 +276,11 @@
 	blk_queue_io_opt(mddev->queue,
 			 (mddev->chunk_sectors << 9) * mddev->raid_disks);
 
+	if (!discard_supported)
+		queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+	else
+		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+
 	pr_debug("md/raid0:%s: done.\n", mdname(mddev));
 	*private_conf = conf;
 
@@ -423,6 +432,7 @@
 		return -EINVAL;
 	blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
 	blk_queue_max_write_same_sectors(mddev->queue, mddev->chunk_sectors);
+	blk_queue_max_discard_sectors(mddev->queue, mddev->chunk_sectors);
 
 	/* if private is not null, we are here after takeover */
 	if (mddev->private == NULL) {
@@ -510,7 +520,7 @@
 		sector_t sector = bio->bi_sector;
 		struct bio_pair *bp;
 		/* Sanity check -- queue functions should prevent this happening */
-		if (bio->bi_vcnt != 1 ||
+		if ((bio->bi_vcnt != 1 && bio->bi_vcnt != 0) ||
 		    bio->bi_idx != 0)
 			goto bad_map;
 		/* This is a one page bio that upper layers
@@ -536,6 +546,13 @@
 	bio->bi_sector = sector_offset + zone->dev_start +
 		tmp_dev->data_offset;
 
+	if (unlikely((bio->bi_rw & REQ_DISCARD) &&
+		     !blk_queue_discard(bdev_get_queue(bio->bi_bdev)))) {
+		/* Just ignore it */
+		bio_endio(bio, 0);
+		return;
+	}
+
 	generic_make_request(bio);
 	return;
 
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 611b5f7..8034fbd 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -333,9 +333,10 @@
 		spin_unlock_irqrestore(&conf->device_lock, flags);
 	}
 
-	if (uptodate)
+	if (uptodate) {
 		raid_end_bio_io(r1_bio);
-	else {
+		rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
+	} else {
 		/*
 		 * oops, read error:
 		 */
@@ -349,9 +350,8 @@
 			(unsigned long long)r1_bio->sector);
 		set_bit(R1BIO_ReadError, &r1_bio->state);
 		reschedule_retry(r1_bio);
+		/* don't drop the reference on read_disk yet */
 	}
-
-	rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
 }
 
 static void close_write(struct r1bio *r1_bio)
@@ -781,7 +781,12 @@
 		while (bio) { /* submit pending writes */
 			struct bio *next = bio->bi_next;
 			bio->bi_next = NULL;
-			generic_make_request(bio);
+			if (unlikely((bio->bi_rw & REQ_DISCARD) &&
+			    !blk_queue_discard(bdev_get_queue(bio->bi_bdev))))
+				/* Just ignore it */
+				bio_endio(bio, 0);
+			else
+				generic_make_request(bio);
 			bio = next;
 		}
 	} else
@@ -994,6 +999,8 @@
 	const int rw = bio_data_dir(bio);
 	const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
 	const unsigned long do_flush_fua = (bio->bi_rw & (REQ_FLUSH | REQ_FUA));
+	const unsigned long do_discard = (bio->bi_rw
+					  & (REQ_DISCARD | REQ_SECURE));
 	struct md_rdev *blocked_rdev;
 	struct blk_plug_cb *cb;
 	struct raid1_plug_cb *plug = NULL;
@@ -1295,7 +1302,7 @@
 				   conf->mirrors[i].rdev->data_offset);
 		mbio->bi_bdev = conf->mirrors[i].rdev->bdev;
 		mbio->bi_end_io	= raid1_end_write_request;
-		mbio->bi_rw = WRITE | do_flush_fua | do_sync;
+		mbio->bi_rw = WRITE | do_flush_fua | do_sync | do_discard;
 		mbio->bi_private = r1_bio;
 
 		atomic_inc(&r1_bio->remaining);
@@ -1549,6 +1556,8 @@
 		clear_bit(Unmerged, &rdev->flags);
 	}
 	md_integrity_add_rdev(rdev, mddev);
+	if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
 	print_conf(conf);
 	return err;
 }
@@ -1867,7 +1876,7 @@
 		} else
 			j = 0;
 		if (j >= 0)
-			mddev->resync_mismatches += r1_bio->sectors;
+			atomic64_add(r1_bio->sectors, &mddev->resync_mismatches);
 		if (j < 0 || (test_bit(MD_RECOVERY_CHECK, &mddev->recovery)
 			      && test_bit(BIO_UPTODATE, &sbio->bi_flags))) {
 			/* No need to write to this device. */
@@ -2220,6 +2229,7 @@
 		unfreeze_array(conf);
 	} else
 		md_error(mddev, conf->mirrors[r1_bio->read_disk].rdev);
+	rdev_dec_pending(conf->mirrors[r1_bio->read_disk].rdev, conf->mddev);
 
 	bio = r1_bio->bios[r1_bio->read_disk];
 	bdevname(bio->bi_bdev, b);
@@ -2285,8 +2295,9 @@
 	}
 }
 
-static void raid1d(struct mddev *mddev)
+static void raid1d(struct md_thread *thread)
 {
+	struct mddev *mddev = thread->mddev;
 	struct r1bio *r1_bio;
 	unsigned long flags;
 	struct r1conf *conf = mddev->private;
@@ -2783,6 +2794,7 @@
 	int i;
 	struct md_rdev *rdev;
 	int ret;
+	bool discard_supported = false;
 
 	if (mddev->level != 1) {
 		printk(KERN_ERR "md/raid1:%s: raid level not set to mirroring (%d)\n",
@@ -2812,6 +2824,8 @@
 			continue;
 		disk_stack_limits(mddev->gendisk, rdev->bdev,
 				  rdev->data_offset << 9);
+		if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+			discard_supported = true;
 	}
 
 	mddev->degraded = 0;
@@ -2846,6 +2860,13 @@
 		mddev->queue->backing_dev_info.congested_fn = raid1_congested;
 		mddev->queue->backing_dev_info.congested_data = mddev;
 		blk_queue_merge_bvec(mddev->queue, raid1_mergeable_bvec);
+
+		if (discard_supported)
+			queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
+						mddev->queue);
+		else
+			queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD,
+						  mddev->queue);
 	}
 
 	ret =  md_integrity_register(mddev);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 0138a72..906ccbd 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -911,7 +911,12 @@
 		while (bio) { /* submit pending writes */
 			struct bio *next = bio->bi_next;
 			bio->bi_next = NULL;
-			generic_make_request(bio);
+			if (unlikely((bio->bi_rw & REQ_DISCARD) &&
+			    !blk_queue_discard(bdev_get_queue(bio->bi_bdev))))
+				/* Just ignore it */
+				bio_endio(bio, 0);
+			else
+				generic_make_request(bio);
 			bio = next;
 		}
 	} else
@@ -1050,6 +1055,44 @@
 		return rdev->new_data_offset;
 }
 
+struct raid10_plug_cb {
+	struct blk_plug_cb	cb;
+	struct bio_list		pending;
+	int			pending_cnt;
+};
+
+static void raid10_unplug(struct blk_plug_cb *cb, bool from_schedule)
+{
+	struct raid10_plug_cb *plug = container_of(cb, struct raid10_plug_cb,
+						   cb);
+	struct mddev *mddev = plug->cb.data;
+	struct r10conf *conf = mddev->private;
+	struct bio *bio;
+
+	if (from_schedule) {
+		spin_lock_irq(&conf->device_lock);
+		bio_list_merge(&conf->pending_bio_list, &plug->pending);
+		conf->pending_count += plug->pending_cnt;
+		spin_unlock_irq(&conf->device_lock);
+		md_wakeup_thread(mddev->thread);
+		kfree(plug);
+		return;
+	}
+
+	/* we aren't scheduling, so we can do the write-out directly. */
+	bio = bio_list_get(&plug->pending);
+	bitmap_unplug(mddev->bitmap);
+	wake_up(&conf->wait_barrier);
+
+	while (bio) { /* submit pending writes */
+		struct bio *next = bio->bi_next;
+		bio->bi_next = NULL;
+		generic_make_request(bio);
+		bio = next;
+	}
+	kfree(plug);
+}
+
 static void make_request(struct mddev *mddev, struct bio * bio)
 {
 	struct r10conf *conf = mddev->private;
@@ -1061,8 +1104,12 @@
 	const int rw = bio_data_dir(bio);
 	const unsigned long do_sync = (bio->bi_rw & REQ_SYNC);
 	const unsigned long do_fua = (bio->bi_rw & REQ_FUA);
+	const unsigned long do_discard = (bio->bi_rw
+					  & (REQ_DISCARD | REQ_SECURE));
 	unsigned long flags;
 	struct md_rdev *blocked_rdev;
+	struct blk_plug_cb *cb;
+	struct raid10_plug_cb *plug = NULL;
 	int sectors_handled;
 	int max_sectors;
 	int sectors;
@@ -1081,7 +1128,7 @@
 			 || conf->prev.near_copies < conf->prev.raid_disks))) {
 		struct bio_pair *bp;
 		/* Sanity check -- queue functions should prevent this happening */
-		if (bio->bi_vcnt != 1 ||
+		if ((bio->bi_vcnt != 1 && bio->bi_vcnt != 0) ||
 		    bio->bi_idx != 0)
 			goto bad_map;
 		/* This is a one page bio that upper layers
@@ -1410,15 +1457,26 @@
 						      conf->mirrors[d].rdev));
 		mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
 		mbio->bi_end_io	= raid10_end_write_request;
-		mbio->bi_rw = WRITE | do_sync | do_fua;
+		mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
 		mbio->bi_private = r10_bio;
 
 		atomic_inc(&r10_bio->remaining);
+
+		cb = blk_check_plugged(raid10_unplug, mddev, sizeof(*plug));
+		if (cb)
+			plug = container_of(cb, struct raid10_plug_cb, cb);
+		else
+			plug = NULL;
 		spin_lock_irqsave(&conf->device_lock, flags);
-		bio_list_add(&conf->pending_bio_list, mbio);
-		conf->pending_count++;
+		if (plug) {
+			bio_list_add(&plug->pending, mbio);
+			plug->pending_cnt++;
+		} else {
+			bio_list_add(&conf->pending_bio_list, mbio);
+			conf->pending_count++;
+		}
 		spin_unlock_irqrestore(&conf->device_lock, flags);
-		if (!mddev_check_plugged(mddev))
+		if (!plug)
 			md_wakeup_thread(mddev->thread);
 
 		if (!r10_bio->devs[i].repl_bio)
@@ -1439,7 +1497,7 @@
 					   conf->mirrors[d].replacement));
 		mbio->bi_bdev = conf->mirrors[d].replacement->bdev;
 		mbio->bi_end_io	= raid10_end_write_request;
-		mbio->bi_rw = WRITE | do_sync | do_fua;
+		mbio->bi_rw = WRITE | do_sync | do_fua | do_discard;
 		mbio->bi_private = r10_bio;
 
 		atomic_inc(&r10_bio->remaining);
@@ -1638,7 +1696,7 @@
 			   && !test_bit(Faulty, &tmp->rdev->flags)
 			   && !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
 			count++;
-			sysfs_notify_dirent(tmp->rdev->sysfs_state);
+			sysfs_notify_dirent_safe(tmp->rdev->sysfs_state);
 		}
 	}
 	spin_lock_irqsave(&conf->device_lock, flags);
@@ -1725,6 +1783,9 @@
 		clear_bit(Unmerged, &rdev->flags);
 	}
 	md_integrity_add_rdev(rdev, mddev);
+	if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+
 	print_conf(conf);
 	return err;
 }
@@ -1952,7 +2013,7 @@
 					break;
 			if (j == vcnt)
 				continue;
-			mddev->resync_mismatches += r10_bio->sectors;
+			atomic64_add(r10_bio->sectors, &mddev->resync_mismatches);
 			if (test_bit(MD_RECOVERY_CHECK, &mddev->recovery))
 				/* Don't fix anything. */
 				continue;
@@ -2673,8 +2734,9 @@
 	}
 }
 
-static void raid10d(struct mddev *mddev)
+static void raid10d(struct md_thread *thread)
 {
+	struct mddev *mddev = thread->mddev;
 	struct r10bio *r10_bio;
 	unsigned long flags;
 	struct r10conf *conf = mddev->private;
@@ -3158,7 +3220,7 @@
 				else {
 					bad_sectors -= (sector - first_bad);
 					if (max_sync > bad_sectors)
-						max_sync = max_sync;
+						max_sync = bad_sectors;
 					continue;
 				}
 			}
@@ -3482,6 +3544,7 @@
 	sector_t size;
 	sector_t min_offset_diff = 0;
 	int first = 1;
+	bool discard_supported = false;
 
 	if (mddev->private == NULL) {
 		conf = setup_conf(mddev);
@@ -3498,6 +3561,8 @@
 
 	chunk_size = mddev->chunk_sectors << 9;
 	if (mddev->queue) {
+		blk_queue_max_discard_sectors(mddev->queue,
+					      mddev->chunk_sectors);
 		blk_queue_io_min(mddev->queue, chunk_size);
 		if (conf->geo.raid_disks % conf->geo.near_copies)
 			blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks);
@@ -3543,8 +3608,16 @@
 					  rdev->data_offset << 9);
 
 		disk->head_position = 0;
+
+		if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+			discard_supported = true;
 	}
 
+	if (discard_supported)
+		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+	else
+		queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
+
 	/* need to check that every block has at least one working mirror */
 	if (!enough(conf, -1)) {
 		printk(KERN_ERR "md/raid10:%s: not enough operational mirrors.\n",
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 0689173..c5439dc 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -551,6 +551,8 @@
 				rw = WRITE_FUA;
 			else
 				rw = WRITE;
+			if (test_bit(R5_Discard, &sh->dev[i].flags))
+				rw |= REQ_DISCARD;
 		} else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags))
 			rw = READ;
 		else if (test_and_clear_bit(R5_WantReplace,
@@ -1174,8 +1176,11 @@
 					set_bit(R5_WantFUA, &dev->flags);
 				if (wbi->bi_rw & REQ_SYNC)
 					set_bit(R5_SyncIO, &dev->flags);
-				tx = async_copy_data(1, wbi, dev->page,
-					dev->sector, tx);
+				if (wbi->bi_rw & REQ_DISCARD)
+					set_bit(R5_Discard, &dev->flags);
+				else
+					tx = async_copy_data(1, wbi, dev->page,
+						dev->sector, tx);
 				wbi = r5_next_bio(wbi, dev->sector);
 			}
 		}
@@ -1191,7 +1196,7 @@
 	int pd_idx = sh->pd_idx;
 	int qd_idx = sh->qd_idx;
 	int i;
-	bool fua = false, sync = false;
+	bool fua = false, sync = false, discard = false;
 
 	pr_debug("%s: stripe %llu\n", __func__,
 		(unsigned long long)sh->sector);
@@ -1199,13 +1204,15 @@
 	for (i = disks; i--; ) {
 		fua |= test_bit(R5_WantFUA, &sh->dev[i].flags);
 		sync |= test_bit(R5_SyncIO, &sh->dev[i].flags);
+		discard |= test_bit(R5_Discard, &sh->dev[i].flags);
 	}
 
 	for (i = disks; i--; ) {
 		struct r5dev *dev = &sh->dev[i];
 
 		if (dev->written || i == pd_idx || i == qd_idx) {
-			set_bit(R5_UPTODATE, &dev->flags);
+			if (!discard)
+				set_bit(R5_UPTODATE, &dev->flags);
 			if (fua)
 				set_bit(R5_WantFUA, &dev->flags);
 			if (sync)
@@ -1241,6 +1248,18 @@
 	pr_debug("%s: stripe %llu\n", __func__,
 		(unsigned long long)sh->sector);
 
+	for (i = 0; i < sh->disks; i++) {
+		if (pd_idx == i)
+			continue;
+		if (!test_bit(R5_Discard, &sh->dev[i].flags))
+			break;
+	}
+	if (i >= sh->disks) {
+		atomic_inc(&sh->count);
+		set_bit(R5_Discard, &sh->dev[pd_idx].flags);
+		ops_complete_reconstruct(sh);
+		return;
+	}
 	/* check if prexor is active which means only process blocks
 	 * that are part of a read-modify-write (written)
 	 */
@@ -1285,10 +1304,24 @@
 {
 	struct async_submit_ctl submit;
 	struct page **blocks = percpu->scribble;
-	int count;
+	int count, i;
 
 	pr_debug("%s: stripe %llu\n", __func__, (unsigned long long)sh->sector);
 
+	for (i = 0; i < sh->disks; i++) {
+		if (sh->pd_idx == i || sh->qd_idx == i)
+			continue;
+		if (!test_bit(R5_Discard, &sh->dev[i].flags))
+			break;
+	}
+	if (i >= sh->disks) {
+		atomic_inc(&sh->count);
+		set_bit(R5_Discard, &sh->dev[sh->pd_idx].flags);
+		set_bit(R5_Discard, &sh->dev[sh->qd_idx].flags);
+		ops_complete_reconstruct(sh);
+		return;
+	}
+
 	count = set_syndrome_sources(blocks, sh);
 
 	atomic_inc(&sh->count);
@@ -2408,11 +2441,11 @@
 		if (sector >= sh->dev[dd_idx].sector + STRIPE_SECTORS)
 			set_bit(R5_OVERWRITE, &sh->dev[dd_idx].flags);
 	}
-	spin_unlock_irq(&sh->stripe_lock);
 
 	pr_debug("added bi b#%llu to stripe s#%llu, disk %d.\n",
 		(unsigned long long)(*bip)->bi_sector,
 		(unsigned long long)sh->sector, dd_idx);
+	spin_unlock_irq(&sh->stripe_lock);
 
 	if (conf->mddev->bitmap && firstwrite) {
 		bitmap_startwrite(conf->mddev->bitmap, sh->sector,
@@ -2479,10 +2512,8 @@
 		bi = sh->dev[i].towrite;
 		sh->dev[i].towrite = NULL;
 		spin_unlock_irq(&sh->stripe_lock);
-		if (bi) {
-			s->to_write--;
+		if (bi)
 			bitmap_end = 1;
-		}
 
 		if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
 			wake_up(&conf->wait_for_overlap);
@@ -2524,11 +2555,12 @@
 		if (!test_bit(R5_Wantfill, &sh->dev[i].flags) &&
 		    (!test_bit(R5_Insync, &sh->dev[i].flags) ||
 		      test_bit(R5_ReadError, &sh->dev[i].flags))) {
+			spin_lock_irq(&sh->stripe_lock);
 			bi = sh->dev[i].toread;
 			sh->dev[i].toread = NULL;
+			spin_unlock_irq(&sh->stripe_lock);
 			if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
 				wake_up(&conf->wait_for_overlap);
-			if (bi) s->to_read--;
 			while (bi && bi->bi_sector <
 			       sh->dev[i].sector + STRIPE_SECTORS) {
 				struct bio *nextbi =
@@ -2741,7 +2773,8 @@
 		if (sh->dev[i].written) {
 			dev = &sh->dev[i];
 			if (!test_bit(R5_LOCKED, &dev->flags) &&
-				test_bit(R5_UPTODATE, &dev->flags)) {
+			    (test_bit(R5_UPTODATE, &dev->flags) ||
+			     test_and_clear_bit(R5_Discard, &dev->flags))) {
 				/* We can return any write requests */
 				struct bio *wbi, *wbi2;
 				pr_debug("Return write for disc %d\n", i);
@@ -2775,12 +2808,25 @@
 				   int disks)
 {
 	int rmw = 0, rcw = 0, i;
-	if (conf->max_degraded == 2) {
-		/* RAID6 requires 'rcw' in current implementation
-		 * Calculate the real rcw later - for now fake it
+	sector_t recovery_cp = conf->mddev->recovery_cp;
+
+	/* RAID6 requires 'rcw' in current implementation.
+	 * Otherwise, check whether resync is now happening or should start.
+	 * If yes, then the array is dirty (after unclean shutdown or
+	 * initial creation), so parity in some stripes might be inconsistent.
+	 * In this case, we need to always do reconstruct-write, to ensure
+	 * that in case of drive failure or read-error correction, we
+	 * generate correct data from the parity.
+	 */
+	if (conf->max_degraded == 2 ||
+	    (recovery_cp < MaxSector && sh->sector >= recovery_cp)) {
+		/* Calculate the real rcw later - for now make it
 		 * look like rcw is cheaper
 		 */
 		rcw = 1; rmw = 2;
+		pr_debug("force RCW max_degraded=%u, recovery_cp=%llu sh->sector=%llu\n",
+			 conf->max_degraded, (unsigned long long)recovery_cp,
+			 (unsigned long long)sh->sector);
 	} else for (i = disks; i--; ) {
 		/* would I have to read this buffer for read_modify_write */
 		struct r5dev *dev = &sh->dev[i];
@@ -2932,7 +2978,7 @@
 			 */
 			set_bit(STRIPE_INSYNC, &sh->state);
 		else {
-			conf->mddev->resync_mismatches += STRIPE_SECTORS;
+			atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches);
 			if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
 				/* don't try to repair!! */
 				set_bit(STRIPE_INSYNC, &sh->state);
@@ -3084,7 +3130,7 @@
 				 */
 			}
 		} else {
-			conf->mddev->resync_mismatches += STRIPE_SECTORS;
+			atomic64_add(STRIPE_SECTORS, &conf->mddev->resync_mismatches);
 			if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
 				/* don't try to repair!! */
 				set_bit(STRIPE_INSYNC, &sh->state);
@@ -3459,10 +3505,12 @@
 	if (s.written &&
 	    (s.p_failed || ((test_bit(R5_Insync, &pdev->flags)
 			     && !test_bit(R5_LOCKED, &pdev->flags)
-			     && test_bit(R5_UPTODATE, &pdev->flags)))) &&
+			     && (test_bit(R5_UPTODATE, &pdev->flags) ||
+				 test_bit(R5_Discard, &pdev->flags))))) &&
 	    (s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
 			     && !test_bit(R5_LOCKED, &qdev->flags)
-			     && test_bit(R5_UPTODATE, &qdev->flags)))))
+			     && (test_bit(R5_UPTODATE, &qdev->flags) ||
+				 test_bit(R5_Discard, &qdev->flags))))))
 		handle_stripe_clean_event(conf, sh, disks, &s.return_bi);
 
 	/* Now we might consider reading some blocks, either to check/generate
@@ -3489,9 +3537,11 @@
 		/* All the 'written' buffers and the parity block are ready to
 		 * be written back to disk
 		 */
-		BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags));
+		BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags) &&
+		       !test_bit(R5_Discard, &sh->dev[sh->pd_idx].flags));
 		BUG_ON(sh->qd_idx >= 0 &&
-		       !test_bit(R5_UPTODATE, &sh->dev[sh->qd_idx].flags));
+		       !test_bit(R5_UPTODATE, &sh->dev[sh->qd_idx].flags) &&
+		       !test_bit(R5_Discard, &sh->dev[sh->qd_idx].flags));
 		for (i = disks; i--; ) {
 			struct r5dev *dev = &sh->dev[i];
 			if (test_bit(R5_LOCKED, &dev->flags) &&
@@ -4072,6 +4122,88 @@
 		release_stripe(sh);
 }
 
+static void make_discard_request(struct mddev *mddev, struct bio *bi)
+{
+	struct r5conf *conf = mddev->private;
+	sector_t logical_sector, last_sector;
+	struct stripe_head *sh;
+	int remaining;
+	int stripe_sectors;
+
+	if (mddev->reshape_position != MaxSector)
+		/* Skip discard while reshape is happening */
+		return;
+
+	logical_sector = bi->bi_sector & ~((sector_t)STRIPE_SECTORS-1);
+	last_sector = bi->bi_sector + (bi->bi_size>>9);
+
+	bi->bi_next = NULL;
+	bi->bi_phys_segments = 1; /* over-loaded to count active stripes */
+
+	stripe_sectors = conf->chunk_sectors *
+		(conf->raid_disks - conf->max_degraded);
+	logical_sector = DIV_ROUND_UP_SECTOR_T(logical_sector,
+					       stripe_sectors);
+	sector_div(last_sector, stripe_sectors);
+
+	logical_sector *= conf->chunk_sectors;
+	last_sector *= conf->chunk_sectors;
+
+	for (; logical_sector < last_sector;
+	     logical_sector += STRIPE_SECTORS) {
+		DEFINE_WAIT(w);
+		int d;
+	again:
+		sh = get_active_stripe(conf, logical_sector, 0, 0, 0);
+		prepare_to_wait(&conf->wait_for_overlap, &w,
+				TASK_UNINTERRUPTIBLE);
+		spin_lock_irq(&sh->stripe_lock);
+		for (d = 0; d < conf->raid_disks; d++) {
+			if (d == sh->pd_idx || d == sh->qd_idx)
+				continue;
+			if (sh->dev[d].towrite || sh->dev[d].toread) {
+				set_bit(R5_Overlap, &sh->dev[d].flags);
+				spin_unlock_irq(&sh->stripe_lock);
+				release_stripe(sh);
+				schedule();
+				goto again;
+			}
+		}
+		finish_wait(&conf->wait_for_overlap, &w);
+		for (d = 0; d < conf->raid_disks; d++) {
+			if (d == sh->pd_idx || d == sh->qd_idx)
+				continue;
+			sh->dev[d].towrite = bi;
+			set_bit(R5_OVERWRITE, &sh->dev[d].flags);
+			raid5_inc_bi_active_stripes(bi);
+		}
+		spin_unlock_irq(&sh->stripe_lock);
+		if (conf->mddev->bitmap) {
+			for (d = 0;
+			     d < conf->raid_disks - conf->max_degraded;
+			     d++)
+				bitmap_startwrite(mddev->bitmap,
+						  sh->sector,
+						  STRIPE_SECTORS,
+						  0);
+			sh->bm_seq = conf->seq_flush + 1;
+			set_bit(STRIPE_BIT_DELAY, &sh->state);
+		}
+
+		set_bit(STRIPE_HANDLE, &sh->state);
+		clear_bit(STRIPE_DELAYED, &sh->state);
+		if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
+			atomic_inc(&conf->preread_active_stripes);
+		release_stripe_plug(mddev, sh);
+	}
+
+	remaining = raid5_dec_bi_active_stripes(bi);
+	if (remaining == 0) {
+		md_write_end(mddev);
+		bio_endio(bi, 0);
+	}
+}
+
 static void make_request(struct mddev *mddev, struct bio * bi)
 {
 	struct r5conf *conf = mddev->private;
@@ -4094,6 +4226,11 @@
 	     chunk_aligned_read(mddev,bi))
 		return;
 
+	if (unlikely(bi->bi_rw & REQ_DISCARD)) {
+		make_discard_request(mddev, bi);
+		return;
+	}
+
 	logical_sector = bi->bi_sector & ~((sector_t)STRIPE_SECTORS-1);
 	last_sector = bi->bi_sector + (bi->bi_size>>9);
 	bi->bi_next = NULL;
@@ -4630,8 +4767,9 @@
  * During the scan, completed stripes are saved for us by the interrupt
  * handler, so that they will not have to wait for our next wakeup.
  */
-static void raid5d(struct mddev *mddev)
+static void raid5d(struct md_thread *thread)
 {
+	struct mddev *mddev = thread->mddev;
 	struct r5conf *conf = mddev->private;
 	int handled;
 	struct blk_plug plug;
@@ -5366,6 +5504,7 @@
 
 	if (mddev->queue) {
 		int chunk_size;
+		bool discard_supported = true;
 		/* read-ahead size must cover two whole stripes, which
 		 * is 2 * (datadisks) * chunksize where 'n' is the
 		 * number of raid devices
@@ -5385,13 +5524,48 @@
 		blk_queue_io_min(mddev->queue, chunk_size);
 		blk_queue_io_opt(mddev->queue, chunk_size *
 				 (conf->raid_disks - conf->max_degraded));
+		/*
+		 * We can only discard a whole stripe. It doesn't make sense to
+		 * discard data disk but write parity disk
+		 */
+		stripe = stripe * PAGE_SIZE;
+		mddev->queue->limits.discard_alignment = stripe;
+		mddev->queue->limits.discard_granularity = stripe;
+		/*
+		 * unaligned part of discard request will be ignored, so can't
+		 * guarantee discard_zerors_data
+		 */
+		mddev->queue->limits.discard_zeroes_data = 0;
 
 		rdev_for_each(rdev, mddev) {
 			disk_stack_limits(mddev->gendisk, rdev->bdev,
 					  rdev->data_offset << 9);
 			disk_stack_limits(mddev->gendisk, rdev->bdev,
 					  rdev->new_data_offset << 9);
+			/*
+			 * discard_zeroes_data is required, otherwise data
+			 * could be lost. Consider a scenario: discard a stripe
+			 * (the stripe could be inconsistent if
+			 * discard_zeroes_data is 0); write one disk of the
+			 * stripe (the stripe could be inconsistent again
+			 * depending on which disks are used to calculate
+			 * parity); the disk is broken; The stripe data of this
+			 * disk is lost.
+			 */
+			if (!blk_queue_discard(bdev_get_queue(rdev->bdev)) ||
+			    !bdev_get_queue(rdev->bdev)->
+						limits.discard_zeroes_data)
+				discard_supported = false;
 		}
+
+		if (discard_supported &&
+		   mddev->queue->limits.max_discard_sectors >= stripe &&
+		   mddev->queue->limits.discard_granularity >= stripe)
+			queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
+						mddev->queue);
+		else
+			queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD,
+						mddev->queue);
 	}
 
 	return 0;
@@ -5702,7 +5876,8 @@
 	if (!check_stripe_cache(mddev))
 		return -ENOSPC;
 
-	return resize_stripes(conf, conf->raid_disks + mddev->delta_disks);
+	return resize_stripes(conf, (conf->previous_raid_disks
+				     + mddev->delta_disks));
 }
 
 static int raid5_start_reshape(struct mddev *mddev)
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index a9fc249..18b2c4a 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -298,6 +298,7 @@
 	R5_WantReplace, /* We need to update the replacement, we have read
 			 * data in, and now is a good time to write it out.
 			 */
+	R5_Discard,	/* Discard the stripe */
 };
 
 /*
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index bb4c2bf..80d1e6d 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -525,7 +525,7 @@
 		writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
 		       ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
 		writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
-		       host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET);
+		       ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_SET);
 	} else {
 		writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
 		       ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index cb3356c..04668b4 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -175,13 +175,13 @@
 /*
  * in the case of WTHRESH, it appears at least the 82571/2 hardware
  * writes back 4 descriptors when WTHRESH=5, and 3 descriptors when
- * WTHRESH=4, and since we want 64 bytes at a time written back, set
- * it to 5
+ * WTHRESH=4, so a setting of 5 gives the most efficient bus
+ * utilization but to avoid possible Tx stalls, set it to 1
  */
 #define E1000_TXDCTL_DMA_BURST_ENABLE                          \
 	(E1000_TXDCTL_GRAN | /* set descriptor granularity */  \
 	 E1000_TXDCTL_COUNT_DESC |                             \
-	 (5 << 16) | /* wthresh must be +1 more than desired */\
+	 (1 << 16) | /* wthresh must be +1 more than desired */\
 	 (1 << 8)  | /* hthresh */                             \
 	 0x1f)       /* pthresh */
 
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index de57a2b..f444eb0 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -2831,7 +2831,7 @@
 		 * set up some performance related parameters to encourage the
 		 * hardware to use the bus more efficiently in bursts, depends
 		 * on the tx_int_delay to be enabled,
-		 * wthresh = 5 ==> burst write a cacheline (64 bytes) at a time
+		 * wthresh = 1 ==> burst write is disabled to avoid Tx stalls
 		 * hthresh = 1 ==> prefetch when one or more available
 		 * pthresh = 0x1f ==> prefetch if internal cache 31 or less
 		 * BEWARE: this seems to work but should be considered first if
diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index c911d88..f8064df 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -27,6 +27,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/pci-aspm.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
@@ -2973,6 +2974,9 @@
 	/*
 	 * set up PCI device basics
 	 */
+	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+			       PCIE_LINK_STATE_CLKPM);
+
 	rc = pci_enable_device(pdev);
 	if (rc) {
 		pr_err("Cannot enable PCI device\n");
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index 434d5af..c81e278 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -244,8 +244,12 @@
 			 *  - suspend: peripheral ready to suspend
 			 *  - response: suggest N millisec polling
 			 *  - response complete: suggest N sec polling
+			 *
+			 * Suspend is reported and maybe heeded.
 			 */
 			case 2:		/* Suspend hint */
+				usbnet_device_suggests_idle(dev);
+				continue;
 			case 3:		/* Response hint */
 			case 4:		/* Response complete hint */
 				continue;
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index c75e11e..afb117c 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -424,7 +424,7 @@
 
 	netdev_dbg(kaweth->net,
 		   "Downloading firmware at %p to kaweth device at %p\n",
-		   fw->data, kaweth);
+		   kaweth->firmware_buf, kaweth);
 	netdev_dbg(kaweth->net, "Firmware length: %d\n", data_len);
 
 	return kaweth_control(kaweth,
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 03c2d8d..cc7e720 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -117,6 +117,7 @@
 struct mcs7830_data {
 	u8 multi_filter[8];
 	u8 config;
+	u8 link_counter;
 };
 
 static const char driver_name[] = "MOSCHIP usb-ethernet driver";
@@ -632,20 +633,31 @@
 static void mcs7830_status(struct usbnet *dev, struct urb *urb)
 {
 	u8 *buf = urb->transfer_buffer;
-	bool link;
+	bool link, link_changed;
+	struct mcs7830_data *data = mcs7830_get_data(dev);
 
 	if (urb->actual_length < 16)
 		return;
 
 	link = !(buf[1] & 0x20);
-	if (netif_carrier_ok(dev->net) != link) {
-		if (link) {
-			netif_carrier_on(dev->net);
-			usbnet_defer_kevent(dev, EVENT_LINK_RESET);
-		} else
-			netif_carrier_off(dev->net);
-		netdev_dbg(dev->net, "Link Status is: %d\n", link);
-	}
+	link_changed = netif_carrier_ok(dev->net) != link;
+	if (link_changed) {
+		data->link_counter++;
+		/*
+		   track link state 20 times to guard against erroneous
+		   link state changes reported sometimes by the chip
+		 */
+		if (data->link_counter > 20) {
+			data->link_counter = 0;
+			if (link) {
+				netif_carrier_on(dev->net);
+				usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+			} else
+				netif_carrier_off(dev->net);
+			netdev_dbg(dev->net, "Link Status is: %d\n", link);
+		}
+	} else
+		data->link_counter = 0;
 }
 
 static const struct driver_info moschip_info = {
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index fc9f578..f9819d1 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1588,10 +1588,27 @@
 			tasklet_schedule (&dev->bh);
 		}
 	}
+
+	if (test_and_clear_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags))
+		usb_autopm_get_interface_no_resume(intf);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(usbnet_resume);
 
+/*
+ * Either a subdriver implements manage_power, then it is assumed to always
+ * be ready to be suspended or it reports the readiness to be suspended
+ * explicitly
+ */
+void usbnet_device_suggests_idle(struct usbnet *dev)
+{
+	if (!test_and_set_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags)) {
+		dev->intf->needs_remote_wakeup = 1;
+		usb_autopm_put_interface_async(dev->intf);
+	}
+}
+EXPORT_SYMBOL(usbnet_device_suggests_idle);
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 8be9bf0..607976c 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -106,6 +106,8 @@
 	__be32	          gaddr;	/* multicast group */
 	__be32		  saddr;	/* source address */
 	unsigned int      link;		/* link to multicast over */
+	__u16		  port_min;	/* source port range */
+	__u16		  port_max;
 	__u8		  tos;		/* TOS override */
 	__u8		  ttl;
 	bool		  learn;
@@ -228,9 +230,9 @@
 
 	/* only want 6 bytes */
 #ifdef __BIG_ENDIAN
-	value <<= 16;
-#else
 	value >>= 16;
+#else
+	value <<= 16;
 #endif
 	return hash_64(value, FDB_HASH_BITS);
 }
@@ -535,7 +537,6 @@
 	}
 
 	__skb_pull(skb, sizeof(struct vxlanhdr));
-	skb_postpull_rcsum(skb, eth_hdr(skb), sizeof(struct vxlanhdr));
 
 	/* Is this VNI defined? */
 	vni = ntohl(vxh->vx_vni) >> 8;
@@ -554,7 +555,6 @@
 	/* Re-examine inner Ethernet packet */
 	oip = ip_hdr(skb);
 	skb->protocol = eth_type_trans(skb, vxlan->dev);
-	skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN);
 
 	/* Ignore packet loops (and multicast echo) */
 	if (compare_ether_addr(eth_hdr(skb)->h_source,
@@ -566,6 +566,7 @@
 
 	__skb_tunnel_rx(skb, vxlan->dev);
 	skb_reset_network_header(skb);
+	skb->ip_summed = CHECKSUM_NONE;
 
 	err = IP_ECN_decapsulate(oip, skb);
 	if (unlikely(err)) {
@@ -621,46 +622,89 @@
 	return INET_ECN_encapsulate(tos, inner);
 }
 
+static __be32 vxlan_find_dst(struct vxlan_dev *vxlan, struct sk_buff *skb)
+{
+	const struct ethhdr *eth = (struct ethhdr *) skb->data;
+	const struct vxlan_fdb *f;
+
+	if (is_multicast_ether_addr(eth->h_dest))
+		return vxlan->gaddr;
+
+	f = vxlan_find_mac(vxlan, eth->h_dest);
+	if (f)
+		return f->remote_ip;
+	else
+		return vxlan->gaddr;
+
+}
+
+static void vxlan_sock_free(struct sk_buff *skb)
+{
+	sock_put(skb->sk);
+}
+
+/* On transmit, associate with the tunnel socket */
+static void vxlan_set_owner(struct net_device *dev, struct sk_buff *skb)
+{
+	struct vxlan_net *vn = net_generic(dev_net(dev), vxlan_net_id);
+	struct sock *sk = vn->sock->sk;
+
+	skb_orphan(skb);
+	sock_hold(sk);
+	skb->sk = sk;
+	skb->destructor = vxlan_sock_free;
+}
+
+/* Compute source port for outgoing packet
+ *   first choice to use L4 flow hash since it will spread
+ *     better and maybe available from hardware
+ *   secondary choice is to use jhash on the Ethernet header
+ */
+static u16 vxlan_src_port(const struct vxlan_dev *vxlan, struct sk_buff *skb)
+{
+	unsigned int range = (vxlan->port_max - vxlan->port_min) + 1;
+	u32 hash;
+
+	hash = skb_get_rxhash(skb);
+	if (!hash)
+		hash = jhash(skb->data, 2 * ETH_ALEN,
+			     (__force u32) skb->protocol);
+
+	return (((u64) hash * range) >> 32) + vxlan->port_min;
+}
+
 /* Transmit local packets over Vxlan
  *
  * Outer IP header inherits ECN and DF from inner header.
  * Outer UDP destination is the VXLAN assigned port.
- *           source port is based on hash of flow if available
- *                       otherwise use a random value
+ *           source port is based on hash of flow
  */
 static netdev_tx_t vxlan_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct vxlan_dev *vxlan = netdev_priv(dev);
 	struct rtable *rt;
-	const struct ethhdr *eth;
 	const struct iphdr *old_iph;
 	struct iphdr *iph;
 	struct vxlanhdr *vxh;
 	struct udphdr *uh;
 	struct flowi4 fl4;
-	struct vxlan_fdb *f;
 	unsigned int pkt_len = skb->len;
-	u32 hash;
 	__be32 dst;
+	__u16 src_port;
 	__be16 df = 0;
 	__u8 tos, ttl;
 	int err;
 
+	dst = vxlan_find_dst(vxlan, skb);
+	if (!dst)
+		goto drop;
+
 	/* Need space for new headers (invalidates iph ptr) */
 	if (skb_cow_head(skb, VXLAN_HEADROOM))
 		goto drop;
 
-	eth = (void *)skb->data;
 	old_iph = ip_hdr(skb);
 
-	if (!is_multicast_ether_addr(eth->h_dest) &&
-	    (f = vxlan_find_mac(vxlan, eth->h_dest)))
-		dst = f->remote_ip;
-	else if (vxlan->gaddr) {
-		dst = vxlan->gaddr;
-	} else
-		goto drop;
-
 	ttl = vxlan->ttl;
 	if (!ttl && IN_MULTICAST(ntohl(dst)))
 		ttl = 1;
@@ -669,11 +713,15 @@
 	if (tos == 1)
 		tos = vxlan_get_dsfield(old_iph, skb);
 
-	hash = skb_get_rxhash(skb);
+	src_port = vxlan_src_port(vxlan, skb);
 
-	rt = ip_route_output_gre(dev_net(dev), &fl4, dst,
-				 vxlan->saddr, vxlan->vni,
-				 RT_TOS(tos), vxlan->link);
+	memset(&fl4, 0, sizeof(fl4));
+	fl4.flowi4_oif = vxlan->link;
+	fl4.flowi4_tos = RT_TOS(tos);
+	fl4.daddr = dst;
+	fl4.saddr = vxlan->saddr;
+
+	rt = ip_route_output_key(dev_net(dev), &fl4);
 	if (IS_ERR(rt)) {
 		netdev_dbg(dev, "no route to %pI4\n", &dst);
 		dev->stats.tx_carrier_errors++;
@@ -702,7 +750,7 @@
 	uh = udp_hdr(skb);
 
 	uh->dest = htons(vxlan_port);
-	uh->source = hash ? :random32();
+	uh->source = htons(src_port);
 
 	uh->len = htons(skb->len);
 	uh->check = 0;
@@ -715,10 +763,12 @@
 	iph->frag_off	= df;
 	iph->protocol	= IPPROTO_UDP;
 	iph->tos	= vxlan_ecn_encap(tos, old_iph, skb);
-	iph->daddr	= fl4.daddr;
+	iph->daddr	= dst;
 	iph->saddr	= fl4.saddr;
 	iph->ttl	= ttl ? : ip4_dst_hoplimit(&rt->dst);
 
+	vxlan_set_owner(dev, skb);
+
 	/* See __IPTUNNEL_XMIT */
 	skb->ip_summed = CHECKSUM_NONE;
 	ip_select_ident(iph, &rt->dst, NULL);
@@ -928,9 +978,11 @@
 {
 	struct vxlan_dev *vxlan = netdev_priv(dev);
 	unsigned h;
+	int low, high;
 
 	eth_hw_addr_random(dev);
 	ether_setup(dev);
+	dev->hard_header_len = ETH_HLEN + VXLAN_HEADROOM;
 
 	dev->netdev_ops = &vxlan_netdev_ops;
 	dev->destructor = vxlan_free;
@@ -947,6 +999,10 @@
 	vxlan->age_timer.function = vxlan_cleanup;
 	vxlan->age_timer.data = (unsigned long) vxlan;
 
+	inet_get_local_port_range(&low, &high);
+	vxlan->port_min = low;
+	vxlan->port_max = high;
+
 	vxlan->dev = dev;
 
 	for (h = 0; h < FDB_HASH_SIZE; ++h)
@@ -963,6 +1019,7 @@
 	[IFLA_VXLAN_LEARNING]	= { .type = NLA_U8 },
 	[IFLA_VXLAN_AGEING]	= { .type = NLA_U32 },
 	[IFLA_VXLAN_LIMIT]	= { .type = NLA_U32 },
+	[IFLA_VXLAN_PORT_RANGE] = { .len  = sizeof(struct ifla_vxlan_port_range) },
 };
 
 static int vxlan_validate(struct nlattr *tb[], struct nlattr *data[])
@@ -995,6 +1052,18 @@
 			return -EADDRNOTAVAIL;
 		}
 	}
+
+	if (data[IFLA_VXLAN_PORT_RANGE]) {
+		const struct ifla_vxlan_port_range *p
+			= nla_data(data[IFLA_VXLAN_PORT_RANGE]);
+
+		if (ntohs(p->high) < ntohs(p->low)) {
+			pr_debug("port range %u .. %u not valid\n",
+				 ntohs(p->low), ntohs(p->high));
+			return -EINVAL;
+		}
+	}
+
 	return 0;
 }
 
@@ -1021,14 +1090,18 @@
 	if (data[IFLA_VXLAN_LOCAL])
 		vxlan->saddr = nla_get_be32(data[IFLA_VXLAN_LOCAL]);
 
-	if (data[IFLA_VXLAN_LINK]) {
-		vxlan->link = nla_get_u32(data[IFLA_VXLAN_LINK]);
+	if (data[IFLA_VXLAN_LINK] &&
+	    (vxlan->link = nla_get_u32(data[IFLA_VXLAN_LINK]))) {
+		struct net_device *lowerdev
+			 = __dev_get_by_index(net, vxlan->link);
 
-		if (!tb[IFLA_MTU]) {
-			struct net_device *lowerdev;
-			lowerdev = __dev_get_by_index(net, vxlan->link);
-			dev->mtu = lowerdev->mtu - VXLAN_HEADROOM;
+		if (!lowerdev) {
+			pr_info("ifindex %d does not exist\n", vxlan->link);
+			return -ENODEV;
 		}
+
+		if (!tb[IFLA_MTU])
+			dev->mtu = lowerdev->mtu - VXLAN_HEADROOM;
 	}
 
 	if (data[IFLA_VXLAN_TOS])
@@ -1045,6 +1118,13 @@
 	if (data[IFLA_VXLAN_LIMIT])
 		vxlan->addrmax = nla_get_u32(data[IFLA_VXLAN_LIMIT]);
 
+	if (data[IFLA_VXLAN_PORT_RANGE]) {
+		const struct ifla_vxlan_port_range *p
+			= nla_data(data[IFLA_VXLAN_PORT_RANGE]);
+		vxlan->port_min = ntohs(p->low);
+		vxlan->port_max = ntohs(p->high);
+	}
+
 	err = register_netdevice(dev);
 	if (!err)
 		hlist_add_head_rcu(&vxlan->hlist, vni_head(net, vxlan->vni));
@@ -1073,12 +1153,17 @@
 		nla_total_size(sizeof(__u8)) +	/* IFLA_VXLAN_LEARNING */
 		nla_total_size(sizeof(__u32)) +	/* IFLA_VXLAN_AGEING */
 		nla_total_size(sizeof(__u32)) +	/* IFLA_VXLAN_LIMIT */
+		nla_total_size(sizeof(struct ifla_vxlan_port_range)) +
 		0;
 }
 
 static int vxlan_fill_info(struct sk_buff *skb, const struct net_device *dev)
 {
 	const struct vxlan_dev *vxlan = netdev_priv(dev);
+	struct ifla_vxlan_port_range ports = {
+		.low =  htons(vxlan->port_min),
+		.high = htons(vxlan->port_max),
+	};
 
 	if (nla_put_u32(skb, IFLA_VXLAN_ID, vxlan->vni))
 		goto nla_put_failure;
@@ -1099,6 +1184,9 @@
 	    nla_put_u32(skb, IFLA_VXLAN_LIMIT, vxlan->addrmax))
 		goto nla_put_failure;
 
+	if (nla_put(skb, IFLA_VXLAN_PORT_RANGE, sizeof(ports), &ports))
+		goto nla_put_failure;
+
 	return 0;
 
 nla_put_failure:
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 9fd6d9a..9f31cfa 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1804,7 +1804,7 @@
 {
 	int ret;
 	struct ath5k_hw *ah = hw->priv;
-	struct ath5k_vif *avf = (void *)vif->drv_priv;
+	struct ath5k_vif *avf;
 	struct sk_buff *skb;
 
 	if (WARN_ON(!vif)) {
@@ -1819,6 +1819,7 @@
 		goto out;
 	}
 
+	avf = (void *)vif->drv_priv;
 	ath5k_txbuf_free_skb(ah, avf->bbuf);
 	avf->bbuf->skb = skb;
 	ret = ath5k_beacon_setup(ah, avf->bbuf);
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 76f07d8..1b48414 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -120,7 +120,7 @@
 
 	if (ath_tx_start(hw, skb, &txctl) != 0) {
 		ath_dbg(common, XMIT, "CABQ TX failed\n");
-		dev_kfree_skb_any(skb);
+		ieee80211_free_txskb(hw, skb);
 	}
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index f9a6ec5..8e1559a 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1450,9 +1450,14 @@
 	REG_WRITE(ah, AR_RTC_FORCE_WAKE,
 		  AR_RTC_FORCE_WAKE_EN | AR_RTC_FORCE_WAKE_ON_INT);
 
+	if (!ah->reset_power_on)
+		type = ATH9K_RESET_POWER_ON;
+
 	switch (type) {
 	case ATH9K_RESET_POWER_ON:
 		ret = ath9k_hw_set_reset_power_on(ah);
+		if (!ret)
+			ah->reset_power_on = true;
 		break;
 	case ATH9K_RESET_WARM:
 	case ATH9K_RESET_COLD:
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 566a4ce..dbc1b7a 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -741,6 +741,7 @@
 	u32 rfkill_polarity;
 	u32 ah_flags;
 
+	bool reset_power_on;
 	bool htc_reset_init;
 
 	enum nl80211_iftype opmode;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 31ab82e..dd45edf 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -639,8 +639,7 @@
 		ath_err(common,
 			"Unable to reset hardware; reset status %d (freq %u MHz)\n",
 			r, curchan->center_freq);
-		spin_unlock_bh(&sc->sc_pcu_lock);
-		goto mutex_unlock;
+		ah->reset_power_on = false;
 	}
 
 	/* Setup our intr mask. */
@@ -665,11 +664,8 @@
 	clear_bit(SC_OP_INVALID, &sc->sc_flags);
 	sc->sc_ah->is_monitoring = false;
 
-	if (!ath_complete_reset(sc, false)) {
-		r = -EIO;
-		spin_unlock_bh(&sc->sc_pcu_lock);
-		goto mutex_unlock;
-	}
+	if (!ath_complete_reset(sc, false))
+		ah->reset_power_on = false;
 
 	if (ah->led_pin >= 0) {
 		ath9k_hw_cfg_output(ah, ah->led_pin,
@@ -688,12 +684,11 @@
 	if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en)
 		common->bus_ops->extn_synch_en(common);
 
-mutex_unlock:
 	mutex_unlock(&sc->mutex);
 
 	ath9k_ps_restore(sc);
 
-	return r;
+	return 0;
 }
 
 static void ath9k_tx(struct ieee80211_hw *hw,
@@ -770,7 +765,7 @@
 
 	return;
 exit:
-	dev_kfree_skb_any(skb);
+	ieee80211_free_txskb(hw, skb);
 }
 
 static void ath9k_stop(struct ieee80211_hw *hw)
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 0e630a9..f088f4b 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -324,6 +324,10 @@
 static int ath_pci_resume(struct device *device)
 {
 	struct pci_dev *pdev = to_pci_dev(device);
+	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+	struct ath_softc *sc = hw->priv;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 val;
 
 	/*
@@ -335,6 +339,9 @@
 	if ((val & 0x0000ff00) != 0)
 		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
 
+	ath_pci_aspm_init(common);
+	ah->reset_power_on = false;
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 36618e3..378bd70 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -66,8 +66,7 @@
 static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc,
 					   struct ath_txq *txq,
 					   struct ath_atx_tid *tid,
-					   struct sk_buff *skb,
-					   bool dequeue);
+					   struct sk_buff *skb);
 
 enum {
 	MCS_HT20,
@@ -176,7 +175,15 @@
 		fi = get_frame_info(skb);
 		bf = fi->bf;
 
-		if (bf && fi->retries) {
+		if (!bf) {
+			bf = ath_tx_setup_buffer(sc, txq, tid, skb);
+			if (!bf) {
+				ieee80211_free_txskb(sc->hw, skb);
+				continue;
+			}
+		}
+
+		if (fi->retries) {
 			list_add_tail(&bf->list, &bf_head);
 			ath_tx_update_baw(sc, tid, bf->bf_state.seqno);
 			ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0);
@@ -785,10 +792,13 @@
 		fi = get_frame_info(skb);
 		bf = fi->bf;
 		if (!fi->bf)
-			bf = ath_tx_setup_buffer(sc, txq, tid, skb, true);
+			bf = ath_tx_setup_buffer(sc, txq, tid, skb);
 
-		if (!bf)
+		if (!bf) {
+			__skb_unlink(skb, &tid->buf_q);
+			ieee80211_free_txskb(sc->hw, skb);
 			continue;
+		}
 
 		bf->bf_state.bf_type = BUF_AMPDU | BUF_AGGR;
 		seqno = bf->bf_state.seqno;
@@ -1731,9 +1741,11 @@
 		return;
 	}
 
-	bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb, false);
-	if (!bf)
+	bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb);
+	if (!bf) {
+		ieee80211_free_txskb(sc->hw, skb);
 		return;
+	}
 
 	bf->bf_state.bf_type = BUF_AMPDU;
 	INIT_LIST_HEAD(&bf_head);
@@ -1757,11 +1769,6 @@
 	struct ath_buf *bf;
 
 	bf = fi->bf;
-	if (!bf)
-		bf = ath_tx_setup_buffer(sc, txq, tid, skb, false);
-
-	if (!bf)
-		return;
 
 	INIT_LIST_HEAD(&bf_head);
 	list_add_tail(&bf->list, &bf_head);
@@ -1839,8 +1846,7 @@
 static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc,
 					   struct ath_txq *txq,
 					   struct ath_atx_tid *tid,
-					   struct sk_buff *skb,
-					   bool dequeue)
+					   struct sk_buff *skb)
 {
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_frame_info *fi = get_frame_info(skb);
@@ -1852,7 +1858,7 @@
 	bf = ath_tx_get_buffer(sc);
 	if (!bf) {
 		ath_dbg(common, XMIT, "TX buffers are full\n");
-		goto error;
+		return NULL;
 	}
 
 	ATH_TXBUF_RESET(bf);
@@ -1881,18 +1887,12 @@
 		ath_err(ath9k_hw_common(sc->sc_ah),
 			"dma_mapping_error() on TX\n");
 		ath_tx_return_buffer(sc, bf);
-		goto error;
+		return NULL;
 	}
 
 	fi->bf = bf;
 
 	return bf;
-
-error:
-	if (dequeue)
-		__skb_unlink(skb, &tid->buf_q);
-	dev_kfree_skb_any(skb);
-	return NULL;
 }
 
 /* FIXME: tx power */
@@ -1921,9 +1921,14 @@
 		 */
 		ath_tx_send_ampdu(sc, tid, skb, txctl);
 	} else {
-		bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb, false);
-		if (!bf)
+		bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb);
+		if (!bf) {
+			if (txctl->paprd)
+				dev_kfree_skb_any(skb);
+			else
+				ieee80211_free_txskb(sc->hw, skb);
 			return;
+		}
 
 		bf->bf_state.bfs_paprd = txctl->paprd;
 
diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h
index 2aa4a59..2df17f1 100644
--- a/drivers/net/wireless/ath/carl9170/carl9170.h
+++ b/drivers/net/wireless/ath/carl9170/carl9170.h
@@ -303,6 +303,7 @@
 	unsigned long queue_stop_timeout[__AR9170_NUM_TXQ];
 	unsigned long max_queue_stop_timeout[__AR9170_NUM_TXQ];
 	bool needs_full_reset;
+	bool force_usb_reset;
 	atomic_t pending_restarts;
 
 	/* interface mode settings */
diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c
index 67997b3..25a1e2f 100644
--- a/drivers/net/wireless/ath/carl9170/main.c
+++ b/drivers/net/wireless/ath/carl9170/main.c
@@ -465,27 +465,26 @@
 {
 	struct ar9170 *ar = container_of(work, struct ar9170,
 					 restart_work);
-	int err;
+	int err = -EIO;
 
 	ar->usedkeys = 0;
 	ar->filter_state = 0;
 	carl9170_cancel_worker(ar);
 
 	mutex_lock(&ar->mutex);
-	err = carl9170_usb_restart(ar);
-	if (net_ratelimit()) {
-		if (err) {
-			dev_err(&ar->udev->dev, "Failed to restart device "
-				" (%d).\n", err);
-		 } else {
-			dev_info(&ar->udev->dev, "device restarted "
-				 "successfully.\n");
+	if (!ar->force_usb_reset) {
+		err = carl9170_usb_restart(ar);
+		if (net_ratelimit()) {
+			if (err)
+				dev_err(&ar->udev->dev, "Failed to restart device (%d).\n", err);
+			else
+				dev_info(&ar->udev->dev, "device restarted successfully.\n");
 		}
 	}
-
 	carl9170_zap_queues(ar);
 	mutex_unlock(&ar->mutex);
-	if (!err) {
+
+	if (!err && !ar->force_usb_reset) {
 		ar->restart_counter++;
 		atomic_set(&ar->pending_restarts, 0);
 
@@ -526,10 +525,10 @@
 	if (!ar->registered)
 		return;
 
-	if (IS_ACCEPTING_CMD(ar) && !ar->needs_full_reset)
-		ieee80211_queue_work(ar->hw, &ar->restart_work);
-	else
-		carl9170_usb_reset(ar);
+	if (!IS_ACCEPTING_CMD(ar) || ar->needs_full_reset)
+		ar->force_usb_reset = true;
+
+	ieee80211_queue_work(ar->hw, &ar->restart_work);
 
 	/*
 	 * At this point, the device instance might have vanished/disabled.
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 2691620..0679458 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1596,8 +1596,9 @@
 		}
 	}
 
-	if (mwifiex_bss_start(priv, bss, &req_ssid))
-		return -EFAULT;
+	ret = mwifiex_bss_start(priv, bss, &req_ssid);
+	if (ret)
+		return ret;
 
 	if (mode == NL80211_IFTYPE_ADHOC) {
 		/* Inform the BSS information to kernel, otherwise
@@ -1652,9 +1653,19 @@
 			"info: association to bssid %pM failed\n",
 			priv->cfg_bssid);
 		memset(priv->cfg_bssid, 0, ETH_ALEN);
+
+		if (ret > 0)
+			cfg80211_connect_result(priv->netdev, priv->cfg_bssid,
+						NULL, 0, NULL, 0, ret,
+						GFP_KERNEL);
+		else
+			cfg80211_connect_result(priv->netdev, priv->cfg_bssid,
+						NULL, 0, NULL, 0,
+						WLAN_STATUS_UNSPECIFIED_FAILURE,
+						GFP_KERNEL);
 	}
 
-	return ret;
+	return 0;
 }
 
 /*
@@ -1802,7 +1813,7 @@
 {
 	struct net_device *dev = request->wdev->netdev;
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
-	int i, offset;
+	int i, offset, ret;
 	struct ieee80211_channel *chan;
 	struct ieee_types_header *ie;
 
@@ -1855,8 +1866,12 @@
 
 		priv->user_scan_cfg->chan_list[i].scan_time = 0;
 	}
-	if (mwifiex_scan_networks(priv, priv->user_scan_cfg))
-		return -EFAULT;
+
+	ret = mwifiex_scan_networks(priv, priv->user_scan_cfg);
+	if (ret) {
+		dev_err(priv->adapter->dev, "scan failed: %d\n", ret);
+		return ret;
+	}
 
 	if (request->ie && request->ie_len) {
 		for (i = 0; i < MWIFIEX_MAX_VSIE_NUM; i++) {
diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index 82e63ce..7b0858a 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -1180,16 +1180,18 @@
 	struct mwifiex_adapter *adapter = priv->adapter;
 	struct host_cmd_ds_802_11_ad_hoc_result *adhoc_result;
 	struct mwifiex_bssdescriptor *bss_desc;
+	u16 reason_code;
 
 	adhoc_result = &resp->params.adhoc_result;
 
 	bss_desc = priv->attempted_bss_desc;
 
 	/* Join result code 0 --> SUCCESS */
-	if (le16_to_cpu(resp->result)) {
+	reason_code = le16_to_cpu(resp->result);
+	if (reason_code) {
 		dev_err(priv->adapter->dev, "ADHOC_RESP: failed\n");
 		if (priv->media_connected)
-			mwifiex_reset_connect_state(priv);
+			mwifiex_reset_connect_state(priv, reason_code);
 
 		memset(&priv->curr_bss_params.bss_descriptor,
 		       0x00, sizeof(struct mwifiex_bssdescriptor));
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index bfb3fa6..c2d0ab1 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -847,7 +847,7 @@
 				 struct mwifiex_bssdescriptor *bss_desc);
 int mwifiex_ret_802_11_associate(struct mwifiex_private *priv,
 				 struct host_cmd_ds_command *resp);
-void mwifiex_reset_connect_state(struct mwifiex_private *priv);
+void mwifiex_reset_connect_state(struct mwifiex_private *priv, u16 reason);
 u8 mwifiex_band_to_radio_type(u8 band);
 int mwifiex_deauthenticate(struct mwifiex_private *priv, u8 *mac);
 int mwifiex_adhoc_start(struct mwifiex_private *priv,
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index e36a7598..00b658d 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1296,7 +1296,7 @@
 int mwifiex_scan_networks(struct mwifiex_private *priv,
 			  const struct mwifiex_user_scan_cfg *user_scan_in)
 {
-	int ret = 0;
+	int ret;
 	struct mwifiex_adapter *adapter = priv->adapter;
 	struct cmd_ctrl_node *cmd_node;
 	union mwifiex_scan_cmd_config_tlv *scan_cfg_out;
@@ -1309,25 +1309,26 @@
 	unsigned long flags;
 
 	if (adapter->scan_processing) {
-		dev_dbg(adapter->dev, "cmd: Scan already in process...\n");
-		return ret;
+		dev_err(adapter->dev, "cmd: Scan already in process...\n");
+		return -EBUSY;
+	}
+
+	if (priv->scan_block) {
+		dev_err(adapter->dev,
+			"cmd: Scan is blocked during association...\n");
+		return -EBUSY;
 	}
 
 	spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
 	adapter->scan_processing = true;
 	spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
 
-	if (priv->scan_block) {
-		dev_dbg(adapter->dev,
-			"cmd: Scan is blocked during association...\n");
-		return ret;
-	}
-
 	scan_cfg_out = kzalloc(sizeof(union mwifiex_scan_cmd_config_tlv),
 								GFP_KERNEL);
 	if (!scan_cfg_out) {
 		dev_err(adapter->dev, "failed to alloc scan_cfg_out\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto done;
 	}
 
 	buf_size = sizeof(struct mwifiex_chan_scan_param_set) *
@@ -1336,7 +1337,8 @@
 	if (!scan_chan_list) {
 		dev_err(adapter->dev, "failed to alloc scan_chan_list\n");
 		kfree(scan_cfg_out);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto done;
 	}
 
 	mwifiex_config_scan(priv, user_scan_in, &scan_cfg_out->config,
@@ -1364,14 +1366,16 @@
 			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
 					       flags);
 		}
-	} else {
-		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
-		adapter->scan_processing = true;
-		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
 	}
 
 	kfree(scan_cfg_out);
 	kfree(scan_chan_list);
+done:
+	if (ret) {
+		spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags);
+		adapter->scan_processing = false;
+		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
+	}
 	return ret;
 }
 
@@ -1430,8 +1434,8 @@
 			ret = mwifiex_is_network_compatible(priv, bss_desc,
 							    priv->bss_mode);
 			if (ret)
-				dev_err(priv->adapter->dev, "cannot find ssid "
-					"%s\n", bss_desc->ssid.ssid);
+				dev_err(priv->adapter->dev,
+					"Incompatible network settings\n");
 			break;
 		default:
 			ret = 0;
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index e380171..09e6a26 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -545,7 +545,7 @@
 	if (!memcmp(resp->params.deauth.mac_addr,
 		    &priv->curr_bss_params.bss_descriptor.mac_address,
 		    sizeof(resp->params.deauth.mac_addr)))
-		mwifiex_reset_connect_state(priv);
+		mwifiex_reset_connect_state(priv, WLAN_REASON_DEAUTH_LEAVING);
 
 	return 0;
 }
@@ -558,7 +558,7 @@
 static int mwifiex_ret_802_11_ad_hoc_stop(struct mwifiex_private *priv,
 					  struct host_cmd_ds_command *resp)
 {
-	mwifiex_reset_connect_state(priv);
+	mwifiex_reset_connect_state(priv, WLAN_REASON_DEAUTH_LEAVING);
 	return 0;
 }
 
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index aafde30..8132119 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -41,7 +41,7 @@
  *      - Sends a disconnect event to upper layers/applications.
  */
 void
-mwifiex_reset_connect_state(struct mwifiex_private *priv)
+mwifiex_reset_connect_state(struct mwifiex_private *priv, u16 reason_code)
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
 
@@ -117,10 +117,10 @@
 	priv->media_connected = false;
 	dev_dbg(adapter->dev,
 		"info: successfully disconnected from %pM: reason code %d\n",
-		priv->cfg_bssid, WLAN_REASON_DEAUTH_LEAVING);
+		priv->cfg_bssid, reason_code);
 	if (priv->bss_mode == NL80211_IFTYPE_STATION) {
-		cfg80211_disconnected(priv->netdev, WLAN_REASON_DEAUTH_LEAVING,
-				      NULL, 0, GFP_KERNEL);
+		cfg80211_disconnected(priv->netdev, reason_code, NULL, 0,
+				      GFP_KERNEL);
 	}
 	memset(priv->cfg_bssid, 0, ETH_ALEN);
 
@@ -186,7 +186,7 @@
 	struct mwifiex_adapter *adapter = priv->adapter;
 	int ret = 0;
 	u32 eventcause = adapter->event_cause;
-	u16 ctrl;
+	u16 ctrl, reason_code;
 
 	switch (eventcause) {
 	case EVENT_DUMMY_HOST_WAKEUP_SIGNAL:
@@ -204,22 +204,31 @@
 	case EVENT_DEAUTHENTICATED:
 		dev_dbg(adapter->dev, "event: Deauthenticated\n");
 		adapter->dbg.num_event_deauth++;
-		if (priv->media_connected)
-			mwifiex_reset_connect_state(priv);
+		if (priv->media_connected) {
+			reason_code =
+				le16_to_cpu(*(__le16 *)adapter->event_body);
+			mwifiex_reset_connect_state(priv, reason_code);
+		}
 		break;
 
 	case EVENT_DISASSOCIATED:
 		dev_dbg(adapter->dev, "event: Disassociated\n");
 		adapter->dbg.num_event_disassoc++;
-		if (priv->media_connected)
-			mwifiex_reset_connect_state(priv);
+		if (priv->media_connected) {
+			reason_code =
+				le16_to_cpu(*(__le16 *)adapter->event_body);
+			mwifiex_reset_connect_state(priv, reason_code);
+		}
 		break;
 
 	case EVENT_LINK_LOST:
 		dev_dbg(adapter->dev, "event: Link lost\n");
 		adapter->dbg.num_event_link_lost++;
-		if (priv->media_connected)
-			mwifiex_reset_connect_state(priv);
+		if (priv->media_connected) {
+			reason_code =
+				le16_to_cpu(*(__le16 *)adapter->event_body);
+			mwifiex_reset_connect_state(priv, reason_code);
+		}
 		break;
 
 	case EVENT_PS_SLEEP:
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 540c94f..01dc889 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2252,9 +2252,9 @@
 	 */
 	if (rt2x00_rt(rt2x00dev, RT3352)) {
 		rt2800_bbp_write(rt2x00dev, 27, 0x0);
-		rt2800_bbp_write(rt2x00dev, 62, 0x26 + rt2x00dev->lna_gain);
+		rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain);
 		rt2800_bbp_write(rt2x00dev, 27, 0x20);
-		rt2800_bbp_write(rt2x00dev, 62, 0x26 + rt2x00dev->lna_gain);
+		rt2800_bbp_write(rt2x00dev, 66, 0x26 + rt2x00dev->lna_gain);
 	} else {
 		rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
 		rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c
index 4ebfcf3..f2d6b78 100644
--- a/drivers/net/xen-netback/netback.c
+++ b/drivers/net/xen-netback/netback.c
@@ -335,21 +335,35 @@
 
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		unsigned long size = skb_frag_size(&skb_shinfo(skb)->frags[i]);
+		unsigned long offset = skb_shinfo(skb)->frags[i].page_offset;
 		unsigned long bytes;
+
+		offset &= ~PAGE_MASK;
+
 		while (size > 0) {
+			BUG_ON(offset >= PAGE_SIZE);
 			BUG_ON(copy_off > MAX_BUFFER_OFFSET);
 
-			if (start_new_rx_buffer(copy_off, size, 0)) {
+			bytes = PAGE_SIZE - offset;
+
+			if (bytes > size)
+				bytes = size;
+
+			if (start_new_rx_buffer(copy_off, bytes, 0)) {
 				count++;
 				copy_off = 0;
 			}
 
-			bytes = size;
 			if (copy_off + bytes > MAX_BUFFER_OFFSET)
 				bytes = MAX_BUFFER_OFFSET - copy_off;
 
 			copy_off += bytes;
+
+			offset += bytes;
 			size -= bytes;
+
+			if (offset == PAGE_SIZE)
+				offset = 0;
 		}
 	}
 	return count;
@@ -403,14 +417,24 @@
 	unsigned long bytes;
 
 	/* Data must not cross a page boundary. */
-	BUG_ON(size + offset > PAGE_SIZE);
+	BUG_ON(size + offset > PAGE_SIZE<<compound_order(page));
 
 	meta = npo->meta + npo->meta_prod - 1;
 
+	/* Skip unused frames from start of page */
+	page += offset >> PAGE_SHIFT;
+	offset &= ~PAGE_MASK;
+
 	while (size > 0) {
+		BUG_ON(offset >= PAGE_SIZE);
 		BUG_ON(npo->copy_off > MAX_BUFFER_OFFSET);
 
-		if (start_new_rx_buffer(npo->copy_off, size, *head)) {
+		bytes = PAGE_SIZE - offset;
+
+		if (bytes > size)
+			bytes = size;
+
+		if (start_new_rx_buffer(npo->copy_off, bytes, *head)) {
 			/*
 			 * Netfront requires there to be some data in the head
 			 * buffer.
@@ -420,7 +444,6 @@
 			meta = get_next_rx_buffer(vif, npo);
 		}
 
-		bytes = size;
 		if (npo->copy_off + bytes > MAX_BUFFER_OFFSET)
 			bytes = MAX_BUFFER_OFFSET - npo->copy_off;
 
@@ -453,6 +476,13 @@
 		offset += bytes;
 		size -= bytes;
 
+		/* Next frame */
+		if (offset == PAGE_SIZE && size) {
+			BUG_ON(!PageCompound(page));
+			page++;
+			offset = 0;
+		}
+
 		/* Leave a gap for the GSO descriptor. */
 		if (*head && skb_shinfo(skb)->gso_size && !vif->gso_prefix)
 			vif->rx.req_cons++;
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 39abb15..84c5688 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -329,7 +329,8 @@
 	if (cdev != cl_dev)
 		return 0;
 
-	if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
+	if (thermal_zone_bind_cooling_device(thermal, 0, cdev,
+			THERMAL_NO_LIMIT, THERMAL_NO_LIMIT)) {
 		pr_err("error binding cooling dev\n");
 		return -EINVAL;
 	}
@@ -661,7 +662,7 @@
 		return -EINVAL;
 
 	thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL,
-					      &acerhdf_dev_ops, 0, 0, 0,
+					      &acerhdf_dev_ops, 0,
 					      (kernelmode) ? interval*1000 : 0);
 	if (IS_ERR(thz_dev))
 		return -EINVAL;
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c
index 3a27113..c809761 100644
--- a/drivers/platform/x86/intel_mid_thermal.c
+++ b/drivers/platform/x86/intel_mid_thermal.c
@@ -502,7 +502,7 @@
 			goto err;
 		}
 		pinfo->tzd[i] = thermal_zone_device_register(name[i],
-				0, 0, td_info, &tzd_ops, 0, 0, 0, 0);
+				0, 0, td_info, &tzd_ops, 0, 0);
 		if (IS_ERR(pinfo->tzd[i])) {
 			kfree(td_info);
 			ret = PTR_ERR(pinfo->tzd[i]);
diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
index 08cc8a3..2436f13 100644
--- a/drivers/power/power_supply_core.c
+++ b/drivers/power/power_supply_core.c
@@ -201,7 +201,7 @@
 	for (i = 0; i < psy->num_properties; i++) {
 		if (psy->properties[i] == POWER_SUPPLY_PROP_TEMP) {
 			psy->tzd = thermal_zone_device_register(psy->name, 0, 0,
-					psy, &psy_tzd_ops, 0, 0, 0, 0);
+					psy, &psy_tzd_ops, 0, 0);
 			if (IS_ERR(psy->tzd))
 				return PTR_ERR(psy->tzd);
 			break;
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index b7c326f..342d7d9 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -165,6 +165,16 @@
 	bfa_phy_memclaim(phy, phy_dma->kva_curp, phy_dma->dma_curp, mincfg);
 }
 
+static void
+bfa_com_fru_attach(struct bfa_s *bfa, bfa_boolean_t mincfg)
+{
+	struct bfa_fru_s	*fru = BFA_FRU(bfa);
+	struct bfa_mem_dma_s	*fru_dma = BFA_MEM_FRU_DMA(bfa);
+
+	bfa_fru_attach(fru, &bfa->ioc, bfa, bfa->trcmod, mincfg);
+	bfa_fru_memclaim(fru, fru_dma->kva_curp, fru_dma->dma_curp, mincfg);
+}
+
 /*
  * BFA IOC FC related definitions
  */
@@ -274,6 +284,15 @@
 	case IOCFC_E_IOC_ENABLED:
 		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_read);
 		break;
+
+	case IOCFC_E_DISABLE:
+		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling);
+		break;
+
+	case IOCFC_E_STOP:
+		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopping);
+		break;
+
 	case IOCFC_E_IOC_FAILED:
 		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_failed);
 		break;
@@ -298,6 +317,15 @@
 	case IOCFC_E_DCONF_DONE:
 		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_cfg_wait);
 		break;
+
+	case IOCFC_E_DISABLE:
+		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling);
+		break;
+
+	case IOCFC_E_STOP:
+		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopping);
+		break;
+
 	case IOCFC_E_IOC_FAILED:
 		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_failed);
 		break;
@@ -322,6 +350,15 @@
 	case IOCFC_E_CFG_DONE:
 		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_cfg_done);
 		break;
+
+	case IOCFC_E_DISABLE:
+		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling);
+		break;
+
+	case IOCFC_E_STOP:
+		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_stopping);
+		break;
+
 	case IOCFC_E_IOC_FAILED:
 		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_init_failed);
 		break;
@@ -433,6 +470,12 @@
 		bfa_cb_queue(iocfc->bfa, &iocfc->bfa->iocfc.stop_hcb_qe,
 			     bfa_iocfc_stop_cb, iocfc->bfa);
 		break;
+
+	case IOCFC_E_IOC_ENABLED:
+	case IOCFC_E_DCONF_DONE:
+	case IOCFC_E_CFG_DONE:
+		break;
+
 	default:
 		bfa_sm_fault(iocfc->bfa, event);
 		break;
@@ -454,6 +497,15 @@
 	case IOCFC_E_IOC_ENABLED:
 		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_cfg_wait);
 		break;
+
+	case IOCFC_E_DISABLE:
+		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling);
+		break;
+
+	case IOCFC_E_STOP:
+		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_write);
+		break;
+
 	case IOCFC_E_IOC_FAILED:
 		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed);
 
@@ -493,6 +545,13 @@
 			     bfa_iocfc_enable_cb, iocfc->bfa);
 		iocfc->bfa->iocfc.cb_reqd = BFA_FALSE;
 		break;
+	case IOCFC_E_DISABLE:
+		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabling);
+		break;
+
+	case IOCFC_E_STOP:
+		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_dconf_write);
+		break;
 	case IOCFC_E_IOC_FAILED:
 		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_failed);
 		if (iocfc->bfa->iocfc.cb_reqd == BFA_FALSE)
@@ -524,6 +583,10 @@
 	case IOCFC_E_IOC_DISABLED:
 		bfa_fsm_set_state(iocfc, bfa_iocfc_sm_disabled);
 		break;
+	case IOCFC_E_IOC_ENABLED:
+	case IOCFC_E_DCONF_DONE:
+	case IOCFC_E_CFG_DONE:
+		break;
 	default:
 		bfa_sm_fault(iocfc->bfa, event);
 		break;
@@ -785,19 +848,20 @@
 bfa_isr_enable(struct bfa_s *bfa)
 {
 	u32 umsk;
-	int pci_func = bfa_ioc_pcifn(&bfa->ioc);
+	int port_id = bfa_ioc_portid(&bfa->ioc);
 
-	bfa_trc(bfa, pci_func);
+	bfa_trc(bfa, bfa_ioc_pcifn(&bfa->ioc));
+	bfa_trc(bfa, port_id);
 
 	bfa_msix_ctrl_install(bfa);
 
 	if (bfa_asic_id_ct2(bfa->ioc.pcidev.device_id)) {
 		umsk = __HFN_INT_ERR_MASK_CT2;
-		umsk |= pci_func == 0 ?
+		umsk |= port_id == 0 ?
 			__HFN_INT_FN0_MASK_CT2 : __HFN_INT_FN1_MASK_CT2;
 	} else {
 		umsk = __HFN_INT_ERR_MASK;
-		umsk |= pci_func == 0 ? __HFN_INT_FN0_MASK : __HFN_INT_FN1_MASK;
+		umsk |= port_id == 0 ? __HFN_INT_FN0_MASK : __HFN_INT_FN1_MASK;
 	}
 
 	writel(umsk, bfa->iocfc.bfa_regs.intr_status);
@@ -930,7 +994,8 @@
 		cfg_info->single_msix_vec = 1;
 	cfg_info->endian_sig = BFI_IOC_ENDIAN_SIG;
 	cfg_info->num_cqs = cfg->fwcfg.num_cqs;
-	cfg_info->num_ioim_reqs = cpu_to_be16(cfg->fwcfg.num_ioim_reqs);
+	cfg_info->num_ioim_reqs = cpu_to_be16(bfa_fcpim_get_throttle_cfg(bfa,
+					       cfg->fwcfg.num_ioim_reqs));
 	cfg_info->num_fwtio_reqs = cpu_to_be16(cfg->fwcfg.num_fwtio_reqs);
 
 	bfa_dma_be_addr_set(cfg_info->cfgrsp_addr, iocfc->cfgrsp_dma.pa);
@@ -1192,10 +1257,14 @@
 static void
 bfa_iocfc_res_recfg(struct bfa_s *bfa, struct bfa_iocfc_fwcfg_s *fwcfg)
 {
+	struct bfa_iocfc_s	*iocfc   = &bfa->iocfc;
+	struct bfi_iocfc_cfg_s	*cfg_info = iocfc->cfginfo;
+
 	bfa_fcxp_res_recfg(bfa, fwcfg->num_fcxp_reqs);
 	bfa_uf_res_recfg(bfa, fwcfg->num_uf_bufs);
 	bfa_rport_res_recfg(bfa, fwcfg->num_rports);
-	bfa_fcp_res_recfg(bfa, fwcfg->num_ioim_reqs);
+	bfa_fcp_res_recfg(bfa, cpu_to_be16(cfg_info->num_ioim_reqs),
+			  fwcfg->num_ioim_reqs);
 	bfa_tskim_res_recfg(bfa, fwcfg->num_tskim_reqs);
 }
 
@@ -1693,6 +1762,7 @@
 	struct bfa_mem_dma_s *flash_dma = BFA_MEM_FLASH_DMA(bfa);
 	struct bfa_mem_dma_s *diag_dma = BFA_MEM_DIAG_DMA(bfa);
 	struct bfa_mem_dma_s *phy_dma = BFA_MEM_PHY_DMA(bfa);
+	struct bfa_mem_dma_s *fru_dma = BFA_MEM_FRU_DMA(bfa);
 
 	WARN_ON((cfg == NULL) || (meminfo == NULL));
 
@@ -1717,6 +1787,8 @@
 	bfa_mem_dma_setup(meminfo, diag_dma, bfa_diag_meminfo());
 	bfa_mem_dma_setup(meminfo, phy_dma,
 			  bfa_phy_meminfo(cfg->drvcfg.min_cfg));
+	bfa_mem_dma_setup(meminfo, fru_dma,
+			  bfa_fru_meminfo(cfg->drvcfg.min_cfg));
 }
 
 /*
@@ -1789,6 +1861,7 @@
 	bfa_com_flash_attach(bfa, cfg->drvcfg.min_cfg);
 	bfa_com_diag_attach(bfa);
 	bfa_com_phy_attach(bfa, cfg->drvcfg.min_cfg);
+	bfa_com_fru_attach(bfa, cfg->drvcfg.min_cfg);
 }
 
 /*
diff --git a/drivers/scsi/bfa/bfa_defs.h b/drivers/scsi/bfa/bfa_defs.h
index b5a1595..0efdf31 100644
--- a/drivers/scsi/bfa/bfa_defs.h
+++ b/drivers/scsi/bfa/bfa_defs.h
@@ -159,10 +159,13 @@
 	BFA_STATUS_BEACON_ON    = 72,   /* Port Beacon already on */
 	BFA_STATUS_ENOFSAVE	= 78,	/*  No saved firmware trace */
 	BFA_STATUS_IOC_DISABLED = 82,   /* IOC is already disabled */
+	BFA_STATUS_ERROR_TRL_ENABLED  = 87,   /* TRL is enabled */
+	BFA_STATUS_ERROR_QOS_ENABLED  = 88,   /* QoS is enabled */
 	BFA_STATUS_NO_SFP_DEV = 89,	/* No SFP device check or replace SFP */
 	BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact support */
 	BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */
 	BFA_STATUS_INVALID_MAC  = 134, /*  Invalid MAC address */
+	BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */
 	BFA_STATUS_PBC		= 154, /*  Operation not allowed for pre-boot
 					*  configuration */
 	BFA_STATUS_BAD_FWCFG = 156,	/* Bad firmware configuration */
@@ -184,6 +187,17 @@
 	BFA_STATUS_FAA_ACQ_ADDR = 200,	/* Acquiring addr */
 	BFA_STATUS_ERROR_TRUNK_ENABLED = 203,	/* Trunk enabled on adapter */
 	BFA_STATUS_MAX_ENTRY_REACHED = 212,	/* MAX entry reached */
+	BFA_STATUS_TOPOLOGY_LOOP = 230, /* Topology is set to Loop */
+	BFA_STATUS_LOOP_UNSUPP_MEZZ = 231, /* Loop topology is not supported
+					    * on mezz cards */
+	BFA_STATUS_INVALID_BW = 233,	/* Invalid bandwidth value */
+	BFA_STATUS_QOS_BW_INVALID = 234,   /* Invalid QOS bandwidth
+					    * configuration */
+	BFA_STATUS_DPORT_ENABLED = 235, /* D-port mode is already enabled */
+	BFA_STATUS_DPORT_DISABLED = 236, /* D-port mode is already disabled */
+	BFA_STATUS_CMD_NOTSUPP_MEZZ = 239, /* Cmd not supported for MEZZ card */
+	BFA_STATUS_FRU_NOT_PRESENT = 240, /* fru module not present */
+	BFA_STATUS_DPORT_ERR = 245,	/* D-port mode is enabled */
 	BFA_STATUS_MAX_VAL		/* Unknown error code */
 };
 #define bfa_status_t enum bfa_status
@@ -249,6 +263,10 @@
 
 	u8		is_mezz;
 	u8		trunk_capable;
+	u8		mfg_day;	/* manufacturing day */
+	u8		mfg_month;	/* manufacturing month */
+	u16		mfg_year;	/* manufacturing year */
+	u16		rsvd;
 };
 
 /*
@@ -499,6 +517,17 @@
 };
 
 /*
+ *	D-port states
+ *
+*/
+enum bfa_dport_state {
+	BFA_DPORT_ST_DISABLED	= 0,	/* D-port is Disabled */
+	BFA_DPORT_ST_DISABLING	= 1,	/* D-port is Disabling */
+	BFA_DPORT_ST_ENABLING	= 2,	/* D-port is Enabling */
+	BFA_DPORT_ST_ENABLED	= 3,	/* D-port is Enabled */
+};
+
+/*
  * ---------------------- mfg definitions ------------
  */
 
@@ -722,7 +751,8 @@
 	u8	rsvd[1];
 	u16	num_qpairs;
 	u16	num_vectors;
-	u32	bw;
+	u16	bw_min;
+	u16	bw_max;
 };
 
 struct bfa_ablk_cfg_port_s {
@@ -889,11 +919,40 @@
 	u8	ext_status_ctl[2];
 };
 
+/*
+ * Diagnostic: Data Fields -- Address A2h
+ * General Use Fields: User Writable Table - Features's Control Registers
+ * Total 32 bytes
+ */
+struct sfp_usr_eeprom_s {
+	u8	rsvd1[2];       /* 128-129 */
+	u8	ewrap;          /* 130 */
+	u8	rsvd2[2];       /*  */
+	u8	owrap;          /* 133 */
+	u8	rsvd3[2];       /*  */
+	u8	prbs;           /* 136: PRBS 7 generator */
+	u8	rsvd4[2];       /*  */
+	u8	tx_eqz_16;      /* 139: TX Equalizer (16xFC) */
+	u8	tx_eqz_8;       /* 140: TX Equalizer (8xFC) */
+	u8	rsvd5[2];       /*  */
+	u8	rx_emp_16;      /* 143: RX Emphasis (16xFC) */
+	u8	rx_emp_8;       /* 144: RX Emphasis (8xFC) */
+	u8	rsvd6[2];       /*  */
+	u8	tx_eye_adj;     /* 147: TX eye Threshold Adjust */
+	u8	rsvd7[3];       /*  */
+	u8	tx_eye_qctl;    /* 151: TX eye Quality Control */
+	u8	tx_eye_qres;    /* 152: TX eye Quality Result */
+	u8	rsvd8[2];       /*  */
+	u8	poh[3];         /* 155-157: Power On Hours */
+	u8	rsvd9[2];       /*  */
+};
+
 struct sfp_mem_s {
 	struct sfp_srlid_base_s	srlid_base;
 	struct sfp_srlid_ext_s	srlid_ext;
 	struct sfp_diag_base_s	diag_base;
 	struct sfp_diag_ext_s	diag_ext;
+	struct sfp_usr_eeprom_s usr_eeprom;
 };
 
 /*
diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h
index 36756ce..ec03c8c 100644
--- a/drivers/scsi/bfa/bfa_defs_svc.h
+++ b/drivers/scsi/bfa/bfa_defs_svc.h
@@ -258,6 +258,7 @@
 	u32    hwsm_lrr_rx;        /*  No. of times LRR rx-ed by HWSM      */
 	u32    hwsm_lr_rx;         /*  No. of times LR rx-ed by HWSM       */
 	u32    bbsc_lr;		   /* LKSM LR tx for credit recovery       */
+	u32	rsvd;
 };
 
 struct bfa_fw_port_snsm_stats_s {
@@ -270,6 +271,9 @@
 	u32    sync_lost;          /*  Sync loss count                     */
 	u32    sig_lost;           /*  Signal loss count                   */
 	u32    asn8g_attempts;	   /* SNSM HWSM at 8Gbps attempts	   */
+	u32    adapt_success;	   /* SNSM adaptation success	*/
+	u32    adapt_fails;	   /* SNSM adaptation failures */
+	u32    adapt_ign_fails;	   /* SNSM adaptation failures ignored */
 };
 
 struct bfa_fw_port_physm_stats_s {
@@ -324,12 +328,46 @@
 	struct bfa_fw_fip_stats_s		fip_stats;
 };
 
+/**
+ * @brief LPSM statistics
+ */
+struct bfa_fw_lpsm_stats_s {
+	u32	cls_rx;		/* LPSM cls_rx			*/
+	u32	cls_tx;		/* LPSM cls_tx			*/
+	u32	arbf0_rx;	/* LPSM abrf0 rcvd		*/
+	u32	arbf0_tx;	/* LPSM abrf0 xmit		*/
+	u32	init_rx;	/* LPSM loop init start		*/
+	u32	unexp_hwst;	/* LPSM unknown hw state	*/
+	u32	unexp_frame;	/* LPSM unknown_frame		*/
+	u32	unexp_prim;	/* LPSM unexpected primitive	*/
+	u32	prev_alpa_unavail; /* LPSM prev alpa unavailable */
+	u32	alpa_unavail;	/* LPSM alpa not available	*/
+	u32	lip_rx;		/* LPSM lip rcvd		*/
+	u32	lip_f7f7_rx;	/* LPSM lip f7f7 rcvd		*/
+	u32	lip_f8_rx;	/* LPSM lip f8 rcvd		*/
+	u32	lip_f8f7_rx;	/* LPSM lip f8f7 rcvd		*/
+	u32	lip_other_rx;	/* LPSM lip other rcvd		*/
+	u32	lip_tx;		/* LPSM lip xmit		*/
+	u32	retry_tov;	/* LPSM retry TOV		*/
+	u32	lip_tov;	/* LPSM LIP wait TOV		*/
+	u32	idle_tov;	/* LPSM idle wait TOV		*/
+	u32	arbf0_tov;	/* LPSM arbfo wait TOV		*/
+	u32	stop_loop_tov;	/* LPSM stop loop wait TOV	*/
+	u32	lixa_tov;	/* LPSM lisa wait TOV		*/
+	u32	lixx_tov;	/* LPSM lilp/lirp wait TOV	*/
+	u32	cls_tov;	/* LPSM cls wait TOV		*/
+	u32	sler;		/* LPSM SLER recvd		*/
+	u32	failed;		/* LPSM failed			*/
+	u32	success;	/* LPSM online			*/
+};
+
 /*
  * IOC firmware FC uport stats
  */
 struct bfa_fw_fc_uport_stats_s {
 	struct bfa_fw_port_snsm_stats_s		snsm_stats;
 	struct bfa_fw_port_lksm_stats_s		lksm_stats;
+	struct bfa_fw_lpsm_stats_s		lpsm_stats;
 };
 
 /*
@@ -357,11 +395,6 @@
 	u32	ua_state_inv;
 };
 
-struct bfa_fw_lpsm_stats_s {
-	u32	cls_rx;
-	u32	cls_tx;
-};
-
 /*
  *  Trunk statistics
  */
@@ -454,7 +487,6 @@
 	struct bfa_fw_io_stats_s	io_stats;
 	struct bfa_fw_port_stats_s	port_stats;
 	struct bfa_fw_fcxchg_stats_s	fcxchg_stats;
-	struct bfa_fw_lpsm_stats_s	lpsm_stats;
 	struct bfa_fw_lps_stats_s	lps_stats;
 	struct bfa_fw_trunk_stats_s	trunk_stats;
 	struct bfa_fw_advsm_stats_s	advsm_stats;
@@ -494,13 +526,23 @@
 	BFA_QOS_BW_LOW  =  10,	/*  bandwidth allocation for Low */
 };
 #pragma pack(1)
+
+struct bfa_qos_bw_s {
+	u8	qos_bw_set;
+	u8	high;
+	u8	med;
+	u8	low;
+};
+
 /*
  * QoS attribute returned in QoS Query
  */
 struct bfa_qos_attr_s {
-	u8		state;		/*  QoS current state */
-	u8		rsvd[3];
-	u32  total_bb_cr;		/*  Total BB Credits */
+	u8	state;		/*  QoS current state */
+	u8	rsvd1[3];
+	u32	total_bb_cr;	/*  Total BB Credits */
+	struct bfa_qos_bw_s qos_bw;	/* QOS bw cfg */
+	struct bfa_qos_bw_s qos_bw_op;	/* QOS bw operational */
 };
 
 /*
@@ -692,7 +734,8 @@
 	BFA_PORT_ST_FWMISMATCH		= 12,
 	BFA_PORT_ST_PREBOOT_DISABLED	= 13,
 	BFA_PORT_ST_TOGGLING_QWAIT	= 14,
-	BFA_PORT_ST_ACQ_ADDR		= 15,
+	BFA_PORT_ST_FAA_MISCONFIG	= 15,
+	BFA_PORT_ST_DPORT		= 16,
 	BFA_PORT_ST_MAX_STATE,
 };
 
@@ -714,9 +757,11 @@
  */
 enum bfa_port_topology {
 	BFA_PORT_TOPOLOGY_NONE = 0,	/*  No valid topology */
-	BFA_PORT_TOPOLOGY_P2P  = 1,	/*  P2P only */
-	BFA_PORT_TOPOLOGY_LOOP = 2,	/*  LOOP topology */
-	BFA_PORT_TOPOLOGY_AUTO = 3,	/*  auto topology selection */
+	BFA_PORT_TOPOLOGY_P2P_OLD_VER = 1, /* P2P def for older ver */
+	BFA_PORT_TOPOLOGY_LOOP = 2,	/* LOOP topology */
+	BFA_PORT_TOPOLOGY_AUTO_OLD_VER = 3, /* auto def for older ver */
+	BFA_PORT_TOPOLOGY_AUTO = 4,	/* auto topology selection */
+	BFA_PORT_TOPOLOGY_P2P = 5,	/* P2P only */
 };
 
 /*
@@ -760,6 +805,7 @@
 	BFA_PORT_LINKSTATE_RSN_LOCAL_FAULT	= 9,
 	BFA_PORT_LINKSTATE_RSN_REMOTE_FAULT	= 10,
 	BFA_PORT_LINKSTATE_RSN_TIMEOUT		= 11,
+	BFA_PORT_LINKSTATE_RSN_FAA_MISCONFIG	= 12,
 
 
 
@@ -833,6 +879,19 @@
 	struct bfa_lun_mask_s	lun_list[MAX_LUN_MASK_CFG];
 };
 
+struct bfa_throttle_cfg_s {
+	u16	is_valid;
+	u16	value;
+	u32	rsvd;
+};
+
+struct bfa_defs_fcpim_throttle_s {
+	u16	max_value;
+	u16	cur_value;
+	u16	cfg_value;
+	u16	rsvd;
+};
+
 /*
  *      Physical port configuration
  */
@@ -851,9 +910,10 @@
 	u8	 bb_scn;	/*  BB_SCN value from FLOGI Exchg */
 	u8	 bb_scn_state;	/*  Config state of BB_SCN */
 	u8	 faa_state;	/*  FAA enabled/disabled        */
-	u8	 rsvd[1];
+	u8	 rsvd1;
 	u16	 path_tov;	/*  device path timeout	*/
 	u16	 q_depth;	/*  SCSI Queue depth		*/
+	struct bfa_qos_bw_s qos_bw;	/* QOS bandwidth	*/
 };
 #pragma pack()
 
@@ -901,7 +961,7 @@
 
 	/* FCoE specific  */
 	u16			fcoe_vlan;
-	u8			rsvd1[2];
+	u8			rsvd1[6];
 };
 
 /*
@@ -971,6 +1031,13 @@
 	u16 vc_credits[8];
 };
 
+struct bfa_fcport_loop_info_s {
+	u8	myalpa;		/* alpa claimed */
+	u8	alpabm_val;	/* alpa bitmap valid or not (1 or 0) */
+	u8	resvd[6];
+	struct fc_alpabm_s alpabm;	/* alpa bitmap */
+};
+
 /*
  *	Link state information
  */
@@ -981,13 +1048,18 @@
 	u8	 speed;		/*  Link speed (1/2/4/8 G) */
 	u32	 linkstate_opt; /*  Linkstate optional data (debug) */
 	u8	 trunked;	/*  Trunked or not (1 or 0) */
-	u8	 resvd[3];
+	u8	 resvd[7];
 	struct bfa_qos_attr_s  qos_attr;   /* QoS Attributes */
 	union {
-		struct bfa_qos_vc_attr_s qos_vc_attr;  /*  VC info from ELP */
-		struct bfa_trunk_vc_attr_s trunk_vc_attr;
-		struct bfa_fcport_fcf_s fcf; /*  FCF information (for FCoE) */
-	} vc_fcf;
+		struct bfa_fcport_loop_info_s loop_info;
+		union {
+			struct bfa_qos_vc_attr_s qos_vc_attr;
+					/*  VC info from ELP */
+			struct bfa_trunk_vc_attr_s trunk_vc_attr;
+			struct bfa_fcport_fcf_s fcf;
+					/*  FCF information (for FCoE) */
+		} vc_fcf;
+	} attr;
 };
 #pragma pack()
 
@@ -1112,6 +1184,9 @@
 	u64     tx_frames;      /*  Tx frames                   */
 	u64     tx_words;       /*  Tx words                    */
 	u64     tx_lip;         /*  Tx LIP                      */
+	u64	tx_lip_f7f7;	/*  Tx LIP_F7F7		*/
+	u64	tx_lip_f8f7;	/*  Tx LIP_F8F7		*/
+	u64	tx_arbf0;	/*  Tx ARB F0			*/
 	u64     tx_nos;         /*  Tx NOS                      */
 	u64     tx_ols;         /*  Tx OLS                      */
 	u64     tx_lr;          /*  Tx LR                       */
@@ -1119,6 +1194,9 @@
 	u64     rx_frames;      /*  Rx frames                   */
 	u64     rx_words;       /*  Rx words                    */
 	u64     lip_count;      /*  Rx LIP                      */
+	u64	rx_lip_f7f7;	/*  Rx LIP_F7F7		*/
+	u64	rx_lip_f8f7;	/*  Rx LIP_F8F7		*/
+	u64	rx_arbf0;	/*  Rx ARB F0			*/
 	u64     nos_count;      /*  Rx NOS                      */
 	u64     ols_count;      /*  Rx OLS                      */
 	u64     lr_count;       /*  Rx LR                       */
@@ -1140,6 +1218,7 @@
 	u64	bbsc_frames_lost; /* Credit Recovery-Frames Lost  */
 	u64	bbsc_credits_lost; /* Credit Recovery-Credits Lost */
 	u64	bbsc_link_resets; /* Credit Recovery-Link Resets   */
+	u64	loop_timeouts;	/*  Loop timeouts		*/
 };
 
 /*
diff --git a/drivers/scsi/bfa/bfa_fc.h b/drivers/scsi/bfa/bfa_fc.h
index e0beb4d..bea821b 100644
--- a/drivers/scsi/bfa/bfa_fc.h
+++ b/drivers/scsi/bfa/bfa_fc.h
@@ -24,6 +24,7 @@
 
 #define WWN_NULL	(0)
 #define FC_SYMNAME_MAX	256	/*  max name server symbolic name size */
+#define FC_ALPA_MAX	128
 
 #pragma pack(1)
 
@@ -1015,6 +1016,10 @@
 	u8         symname[FC_SYMNAME_MAX];
 };
 
+struct fc_alpabm_s {
+	u8	alpa_bm[FC_ALPA_MAX / 8];
+};
+
 /*
  * protocol default timeout values
  */
diff --git a/drivers/scsi/bfa/bfa_fcbuild.c b/drivers/scsi/bfa/bfa_fcbuild.c
index 273cee9..dce787f 100644
--- a/drivers/scsi/bfa/bfa_fcbuild.c
+++ b/drivers/scsi/bfa/bfa_fcbuild.c
@@ -228,6 +228,10 @@
 
 	memcpy(plogi, &plogi_tmpl, sizeof(struct fc_logi_s));
 
+	/* For FC AL bb_cr is 0 and altbbcred is 1 */
+	if (!bb_cr)
+		plogi->csp.altbbcred = 1;
+
 	plogi->els_cmd.els_code = els_code;
 	if (els_code == FC_ELS_PLOGI)
 		fc_els_req_build(fchs, d_id, s_id, ox_id);
diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c
index 1633963..27b5609 100644
--- a/drivers/scsi/bfa/bfa_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcpim.c
@@ -158,6 +158,7 @@
 	BFA_TSKIM_SM_IOS_DONE	= 7,	/*  IO and sub TM completions	*/
 	BFA_TSKIM_SM_CLEANUP	= 8,	/*  TM cleanup on ITN offline	*/
 	BFA_TSKIM_SM_CLEANUP_DONE = 9,	/*  TM abort completion	*/
+	BFA_TSKIM_SM_UTAG	= 10,	/*  TM completion unknown tag  */
 };
 
 /*
@@ -3036,7 +3037,7 @@
 static void
 bfa_tskim_sm_uninit(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 {
-	bfa_trc(tskim->bfa, event);
+	bfa_trc(tskim->bfa, tskim->tsk_tag << 16 | event);
 
 	switch (event) {
 	case BFA_TSKIM_SM_START:
@@ -3074,7 +3075,7 @@
 static void
 bfa_tskim_sm_active(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 {
-	bfa_trc(tskim->bfa, event);
+	bfa_trc(tskim->bfa, tskim->tsk_tag << 16 | event);
 
 	switch (event) {
 	case BFA_TSKIM_SM_DONE:
@@ -3110,7 +3111,7 @@
 static void
 bfa_tskim_sm_cleanup(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 {
-	bfa_trc(tskim->bfa, event);
+	bfa_trc(tskim->bfa, tskim->tsk_tag << 16 | event);
 
 	switch (event) {
 	case BFA_TSKIM_SM_DONE:
@@ -3119,6 +3120,7 @@
 		 */
 		break;
 
+	case BFA_TSKIM_SM_UTAG:
 	case BFA_TSKIM_SM_CLEANUP_DONE:
 		bfa_sm_set_state(tskim, bfa_tskim_sm_iocleanup);
 		bfa_tskim_cleanup_ios(tskim);
@@ -3138,7 +3140,7 @@
 static void
 bfa_tskim_sm_iocleanup(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 {
-	bfa_trc(tskim->bfa, event);
+	bfa_trc(tskim->bfa, tskim->tsk_tag << 16 | event);
 
 	switch (event) {
 	case BFA_TSKIM_SM_IOS_DONE:
@@ -3170,7 +3172,7 @@
 static void
 bfa_tskim_sm_qfull(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 {
-	bfa_trc(tskim->bfa, event);
+	bfa_trc(tskim->bfa, tskim->tsk_tag << 16 | event);
 
 	switch (event) {
 	case BFA_TSKIM_SM_QRESUME:
@@ -3207,7 +3209,7 @@
 bfa_tskim_sm_cleanup_qfull(struct bfa_tskim_s *tskim,
 		enum bfa_tskim_event event)
 {
-	bfa_trc(tskim->bfa, event);
+	bfa_trc(tskim->bfa, tskim->tsk_tag << 16 | event);
 
 	switch (event) {
 	case BFA_TSKIM_SM_DONE:
@@ -3238,7 +3240,7 @@
 static void
 bfa_tskim_sm_hcb(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 {
-	bfa_trc(tskim->bfa, event);
+	bfa_trc(tskim->bfa, tskim->tsk_tag << 16 | event);
 
 	switch (event) {
 	case BFA_TSKIM_SM_HCB:
@@ -3560,6 +3562,8 @@
 	if (rsp->tsk_status == BFI_TSKIM_STS_ABORTED) {
 		bfa_stats(tskim->itnim, tm_cleanup_comps);
 		bfa_sm_send_event(tskim, BFA_TSKIM_SM_CLEANUP_DONE);
+	} else if (rsp->tsk_status == BFI_TSKIM_STS_UTAG) {
+		bfa_sm_send_event(tskim, BFA_TSKIM_SM_UTAG);
 	} else {
 		bfa_stats(tskim->itnim, tm_fw_rsps);
 		bfa_sm_send_event(tskim, BFA_TSKIM_SM_DONE);
@@ -3699,6 +3703,7 @@
 	struct bfa_mem_dma_s *seg_ptr;
 	u16	idx, nsegs, num_io_req;
 
+	fcp->max_ioim_reqs = cfg->fwcfg.num_ioim_reqs;
 	fcp->num_ioim_reqs = cfg->fwcfg.num_ioim_reqs;
 	fcp->num_fwtio_reqs  = cfg->fwcfg.num_fwtio_reqs;
 	fcp->num_itns   = cfg->fwcfg.num_rports;
@@ -3721,6 +3726,7 @@
 		bfa_iocfc_set_snsbase(bfa, idx, fcp->snsbase[idx].pa);
 	}
 
+	fcp->throttle_update_required = 1;
 	bfa_fcpim_attach(fcp, bfad, cfg, pcidev);
 
 	bfa_iotag_attach(fcp);
@@ -3759,23 +3765,33 @@
 {
 	struct bfa_fcp_mod_s *fcp = BFA_FCP_MOD(bfa);
 
-	/* Enqueue unused ioim resources to free_q */
-	list_splice_tail_init(&fcp->iotag_unused_q, &fcp->iotag_ioim_free_q);
-
 	bfa_fcpim_iocdisable(fcp);
 }
 
 void
-bfa_fcp_res_recfg(struct bfa_s *bfa, u16 num_ioim_fw)
+bfa_fcp_res_recfg(struct bfa_s *bfa, u16 num_ioim_fw, u16 max_ioim_fw)
 {
 	struct bfa_fcp_mod_s	*mod = BFA_FCP_MOD(bfa);
 	struct list_head	*qe;
 	int	i;
 
+	/* Update io throttle value only once during driver load time */
+	if (!mod->throttle_update_required)
+		return;
+
 	for (i = 0; i < (mod->num_ioim_reqs - num_ioim_fw); i++) {
 		bfa_q_deq_tail(&mod->iotag_ioim_free_q, &qe);
 		list_add_tail(qe, &mod->iotag_unused_q);
 	}
+
+	if (mod->num_ioim_reqs != num_ioim_fw) {
+		bfa_trc(bfa, mod->num_ioim_reqs);
+		bfa_trc(bfa, num_ioim_fw);
+	}
+
+	mod->max_ioim_reqs = max_ioim_fw;
+	mod->num_ioim_reqs = num_ioim_fw;
+	mod->throttle_update_required = 0;
 }
 
 void
@@ -3833,3 +3849,88 @@
 
 	bfa_mem_kva_curp(fcp) = (u8 *) iotag;
 }
+
+
+/**
+ * To send config req, first try to use throttle value from flash
+ * If 0, then use driver parameter
+ * We need to use min(flash_val, drv_val) because
+ * memory allocation was done based on this cfg'd value
+ */
+u16
+bfa_fcpim_get_throttle_cfg(struct bfa_s *bfa, u16 drv_cfg_param)
+{
+	u16 tmp;
+	struct bfa_fcp_mod_s *fcp = BFA_FCP_MOD(bfa);
+
+	/*
+	 * If throttle value from flash is already in effect after driver is
+	 * loaded then until next load, always return current value instead
+	 * of actual flash value
+	 */
+	if (!fcp->throttle_update_required)
+		return (u16)fcp->num_ioim_reqs;
+
+	tmp = bfa_dconf_read_data_valid(bfa) ? bfa_fcpim_read_throttle(bfa) : 0;
+	if (!tmp || (tmp > drv_cfg_param))
+		tmp = drv_cfg_param;
+
+	return tmp;
+}
+
+bfa_status_t
+bfa_fcpim_write_throttle(struct bfa_s *bfa, u16 value)
+{
+	if (!bfa_dconf_get_min_cfg(bfa)) {
+		BFA_DCONF_MOD(bfa)->dconf->throttle_cfg.value = value;
+		BFA_DCONF_MOD(bfa)->dconf->throttle_cfg.is_valid = 1;
+		return BFA_STATUS_OK;
+	}
+
+	return BFA_STATUS_FAILED;
+}
+
+u16
+bfa_fcpim_read_throttle(struct bfa_s *bfa)
+{
+	struct bfa_throttle_cfg_s *throttle_cfg =
+			&(BFA_DCONF_MOD(bfa)->dconf->throttle_cfg);
+
+	return ((!bfa_dconf_get_min_cfg(bfa)) ?
+	       ((throttle_cfg->is_valid == 1) ? (throttle_cfg->value) : 0) : 0);
+}
+
+bfa_status_t
+bfa_fcpim_throttle_set(struct bfa_s *bfa, u16 value)
+{
+	/* in min cfg no commands should run. */
+	if ((bfa_dconf_get_min_cfg(bfa) == BFA_TRUE) ||
+	    (!bfa_dconf_read_data_valid(bfa)))
+		return BFA_STATUS_FAILED;
+
+	bfa_fcpim_write_throttle(bfa, value);
+
+	return bfa_dconf_update(bfa);
+}
+
+bfa_status_t
+bfa_fcpim_throttle_get(struct bfa_s *bfa, void *buf)
+{
+	struct bfa_fcpim_s *fcpim = BFA_FCPIM(bfa);
+	struct bfa_defs_fcpim_throttle_s throttle;
+
+	if ((bfa_dconf_get_min_cfg(bfa) == BFA_TRUE) ||
+	    (!bfa_dconf_read_data_valid(bfa)))
+		return BFA_STATUS_FAILED;
+
+	memset(&throttle, 0, sizeof(struct bfa_defs_fcpim_throttle_s));
+
+	throttle.cur_value = (u16)(fcpim->fcp->num_ioim_reqs);
+	throttle.cfg_value = bfa_fcpim_read_throttle(bfa);
+	if (!throttle.cfg_value)
+		throttle.cfg_value = throttle.cur_value;
+	throttle.max_value = (u16)(fcpim->fcp->max_ioim_reqs);
+	memcpy(buf, &throttle, sizeof(struct bfa_defs_fcpim_throttle_s));
+
+	return BFA_STATUS_OK;
+}
diff --git a/drivers/scsi/bfa/bfa_fcpim.h b/drivers/scsi/bfa/bfa_fcpim.h
index 36f26da..e693af6 100644
--- a/drivers/scsi/bfa/bfa_fcpim.h
+++ b/drivers/scsi/bfa/bfa_fcpim.h
@@ -42,7 +42,7 @@
 		void (*isr)(struct bfa_s *bfa, struct bfi_msg_s *m));
 void bfa_itn_isr(struct bfa_s *bfa, struct bfi_msg_s *m);
 void bfa_iotag_attach(struct bfa_fcp_mod_s *fcp);
-void bfa_fcp_res_recfg(struct bfa_s *bfa, u16 num_ioim_fw);
+void bfa_fcp_res_recfg(struct bfa_s *bfa, u16 num_ioim_fw, u16 max_ioim_fw);
 
 #define BFA_FCP_MOD(_hal)	(&(_hal)->modules.fcp_mod)
 #define BFA_MEM_FCP_KVA(__bfa)	(&(BFA_FCP_MOD(__bfa)->kva_seg))
@@ -51,7 +51,9 @@
 #define BFA_ITN_FROM_TAG(_fcp, _tag)	\
 	((_fcp)->itn_arr + ((_tag) & ((_fcp)->num_itns - 1)))
 #define BFA_SNSINFO_FROM_TAG(_fcp, _tag) \
-	bfa_mem_get_dmabuf_kva(_fcp, _tag, BFI_IOIM_SNSLEN)
+	bfa_mem_get_dmabuf_kva(_fcp, (_tag & BFA_IOIM_IOTAG_MASK),	\
+	BFI_IOIM_SNSLEN)
+
 
 #define BFA_ITNIM_MIN   32
 #define BFA_ITNIM_MAX   1024
@@ -148,6 +150,7 @@
 	struct list_head	iotag_unused_q;	/* unused IO resources*/
 	struct bfa_iotag_s	*iotag_arr;
 	struct bfa_itn_s	*itn_arr;
+	int			max_ioim_reqs;
 	int			num_ioim_reqs;
 	int			num_fwtio_reqs;
 	int			num_itns;
@@ -155,6 +158,7 @@
 	struct bfa_fcpim_s	fcpim;
 	struct bfa_mem_dma_s	dma_seg[BFA_FCP_DMA_SEGS];
 	struct bfa_mem_kva_s	kva_seg;
+	int			throttle_update_required;
 };
 
 /*
@@ -416,5 +420,10 @@
 bfa_status_t	bfa_fcpim_lunmask_add(struct bfa_s *bfa, u16 vf_id,
 				wwn_t *pwwn, wwn_t rpwwn, struct scsi_lun lun);
 bfa_status_t	bfa_fcpim_lunmask_clear(struct bfa_s *bfa);
+u16		bfa_fcpim_read_throttle(struct bfa_s *bfa);
+bfa_status_t	bfa_fcpim_write_throttle(struct bfa_s *bfa, u16 value);
+bfa_status_t	bfa_fcpim_throttle_set(struct bfa_s *bfa, u16 value);
+bfa_status_t	bfa_fcpim_throttle_get(struct bfa_s *bfa, void *buf);
+u16     bfa_fcpim_get_throttle_cfg(struct bfa_s *bfa, u16 drv_cfg_param);
 
 #endif /* __BFA_FCPIM_H__ */
diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c
index fd3e84d..d428808 100644
--- a/drivers/scsi/bfa/bfa_fcs.c
+++ b/drivers/scsi/bfa/bfa_fcs.c
@@ -303,16 +303,30 @@
 bfa_fcs_fabric_sm_created(struct bfa_fcs_fabric_s *fabric,
 			  enum bfa_fcs_fabric_event event)
 {
+	struct bfa_s	*bfa = fabric->fcs->bfa;
+
 	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
 	bfa_trc(fabric->fcs, event);
 
 	switch (event) {
 	case BFA_FCS_FABRIC_SM_START:
-		if (bfa_fcport_is_linkup(fabric->fcs->bfa)) {
+		if (!bfa_fcport_is_linkup(fabric->fcs->bfa)) {
+			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+			break;
+		}
+		if (bfa_fcport_get_topology(bfa) ==
+				BFA_PORT_TOPOLOGY_LOOP) {
+			fabric->fab_type = BFA_FCS_FABRIC_LOOP;
+			fabric->bport.pid = bfa_fcport_get_myalpa(bfa);
+			fabric->bport.pid = bfa_hton3b(fabric->bport.pid);
+			bfa_sm_set_state(fabric,
+					bfa_fcs_fabric_sm_online);
+			bfa_fcs_fabric_set_opertype(fabric);
+			bfa_fcs_lport_online(&fabric->bport);
+		} else {
 			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_flogi);
 			bfa_fcs_fabric_login(fabric);
-		} else
-			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+		}
 		break;
 
 	case BFA_FCS_FABRIC_SM_LINK_UP:
@@ -337,16 +351,28 @@
 bfa_fcs_fabric_sm_linkdown(struct bfa_fcs_fabric_s *fabric,
 			   enum bfa_fcs_fabric_event event)
 {
+	struct bfa_s	*bfa = fabric->fcs->bfa;
+
 	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
 	bfa_trc(fabric->fcs, event);
 
 	switch (event) {
 	case BFA_FCS_FABRIC_SM_LINK_UP:
-		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_flogi);
-		bfa_fcs_fabric_login(fabric);
+		if (bfa_fcport_get_topology(bfa) != BFA_PORT_TOPOLOGY_LOOP) {
+			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_flogi);
+			bfa_fcs_fabric_login(fabric);
+			break;
+		}
+		fabric->fab_type = BFA_FCS_FABRIC_LOOP;
+		fabric->bport.pid = bfa_fcport_get_myalpa(bfa);
+		fabric->bport.pid = bfa_hton3b(fabric->bport.pid);
+		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_online);
+		bfa_fcs_fabric_set_opertype(fabric);
+		bfa_fcs_lport_online(&fabric->bport);
 		break;
 
 	case BFA_FCS_FABRIC_SM_RETRY_OP:
+	case BFA_FCS_FABRIC_SM_LOOPBACK:
 		break;
 
 	case BFA_FCS_FABRIC_SM_DELETE:
@@ -595,14 +621,20 @@
 bfa_fcs_fabric_sm_online(struct bfa_fcs_fabric_s *fabric,
 			 enum bfa_fcs_fabric_event event)
 {
+	struct bfa_s	*bfa = fabric->fcs->bfa;
+
 	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
 	bfa_trc(fabric->fcs, event);
 
 	switch (event) {
 	case BFA_FCS_FABRIC_SM_LINK_DOWN:
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
-		bfa_sm_send_event(fabric->lps, BFA_LPS_SM_OFFLINE);
-		bfa_fcs_fabric_notify_offline(fabric);
+		if (bfa_fcport_get_topology(bfa) == BFA_PORT_TOPOLOGY_LOOP) {
+			bfa_fcs_lport_offline(&fabric->bport);
+		} else {
+			bfa_sm_send_event(fabric->lps, BFA_LPS_SM_OFFLINE);
+			bfa_fcs_fabric_notify_offline(fabric);
+		}
 		break;
 
 	case BFA_FCS_FABRIC_SM_DELETE:
@@ -719,20 +751,29 @@
 bfa_fcs_fabric_sm_stopping(struct bfa_fcs_fabric_s *fabric,
 			   enum bfa_fcs_fabric_event event)
 {
+	struct bfa_s	*bfa = fabric->fcs->bfa;
+
 	bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
 	bfa_trc(fabric->fcs, event);
 
 	switch (event) {
 	case BFA_FCS_FABRIC_SM_STOPCOMP:
-		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_cleanup);
-		bfa_sm_send_event(fabric->lps, BFA_LPS_SM_LOGOUT);
+		if (bfa_fcport_get_topology(bfa) == BFA_PORT_TOPOLOGY_LOOP) {
+			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_created);
+		} else {
+			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_cleanup);
+			bfa_sm_send_event(fabric->lps, BFA_LPS_SM_LOGOUT);
+		}
 		break;
 
 	case BFA_FCS_FABRIC_SM_LINK_UP:
 		break;
 
 	case BFA_FCS_FABRIC_SM_LINK_DOWN:
-		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_cleanup);
+		if (bfa_fcport_get_topology(bfa) == BFA_PORT_TOPOLOGY_LOOP)
+			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_created);
+		else
+			bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_cleanup);
 		break;
 
 	default:
@@ -975,9 +1016,6 @@
 	struct bfa_lport_cfg_s	*pcfg = &fabric->bport.port_cfg;
 	u8			alpa = 0, bb_scn = 0;
 
-	if (bfa_fcport_get_topology(bfa) == BFA_PORT_TOPOLOGY_LOOP)
-		alpa = bfa_fcport_get_myalpa(bfa);
-
 	if (bfa_fcs_fabric_is_bbscn_enabled(fabric) &&
 	    (!fabric->fcs->bbscn_flogi_rjt))
 		bb_scn = BFA_FCS_PORT_DEF_BB_SCN;
diff --git a/drivers/scsi/bfa/bfa_fcs.h b/drivers/scsi/bfa/bfa_fcs.h
index 6c4377c..a449706 100644
--- a/drivers/scsi/bfa/bfa_fcs.h
+++ b/drivers/scsi/bfa/bfa_fcs.h
@@ -118,9 +118,9 @@
 #define	MAX_ALPA_COUNT	127
 
 struct bfa_fcs_lport_loop_s {
-	u8         num_alpa;	/*  Num of ALPA entries in the map */
-	u8         alpa_pos_map[MAX_ALPA_COUNT];	/*  ALPA Positional
-							 *Map */
+	u8	num_alpa;	/*  Num of ALPA entries in the map */
+	u8	alpabm_valid;	/* alpa bitmap valid or not (1 or 0) */
+	u8	alpa_pos_map[MAX_ALPA_COUNT]; /*  ALPA Positional Map */
 	struct bfa_fcs_lport_s *port;	/*  parent port */
 };
 
@@ -175,6 +175,7 @@
 	BFA_FCS_FABRIC_UNKNOWN = 0,
 	BFA_FCS_FABRIC_SWITCHED = 1,
 	BFA_FCS_FABRIC_N2N = 2,
+	BFA_FCS_FABRIC_LOOP = 3,
 };
 
 
@@ -350,9 +351,10 @@
 				struct bfa_fcxp_s *fcxp_alloced);
 void            bfa_fcs_lport_scn_init(struct bfa_fcs_lport_s *vport);
 void            bfa_fcs_lport_scn_offline(struct bfa_fcs_lport_s *vport);
-void            bfa_fcs_lport_scn_online(struct bfa_fcs_lport_s *vport);
+void            bfa_fcs_lport_fab_scn_online(struct bfa_fcs_lport_s *vport);
 void            bfa_fcs_lport_scn_process_rscn(struct bfa_fcs_lport_s *port,
 					      struct fchs_s *rx_frame, u32 len);
+void		bfa_fcs_lport_lip_scn_online(bfa_fcs_lport_t *port);
 
 struct bfa_fcs_vport_s {
 	struct list_head		qe;		/*  queue elem	*/
@@ -453,6 +455,7 @@
 	struct bfa_rport_stats_s stats;	/*  rport stats */
 	enum bfa_rport_function	scsi_function;  /*  Initiator/Target */
 	struct bfa_fcs_rpf_s rpf;	/* Rport features module */
+	bfa_boolean_t   scn_online;	/* SCN online flag */
 };
 
 static inline struct bfa_rport_s *
@@ -639,9 +642,9 @@
 	u8         model[16];
 	u8         model_desc[256];
 	u8         hw_version[8];
-	u8         driver_version[8];
+	u8         driver_version[BFA_VERSION_LEN];
 	u8         option_rom_ver[BFA_VERSION_LEN];
-	u8         fw_version[8];
+	u8         fw_version[BFA_VERSION_LEN];
 	u8         os_name[256];
 	__be32        max_ct_pyld;
 };
@@ -733,7 +736,7 @@
 	RPSM_EVENT_LOGO_IMP     = 5,    /*  implicit logo for SLER      */
 	RPSM_EVENT_FCXP_SENT    = 6,    /*  Frame from has been sent    */
 	RPSM_EVENT_DELETE       = 7,    /*  RPORT delete request        */
-	RPSM_EVENT_SCN          = 8,    /*  state change notification   */
+	RPSM_EVENT_FAB_SCN	= 8,    /*  state change notification   */
 	RPSM_EVENT_ACCEPTED     = 9,    /*  Good response from remote device */
 	RPSM_EVENT_FAILED       = 10,   /*  Request to rport failed.    */
 	RPSM_EVENT_TIMEOUT      = 11,   /*  Rport SM timeout event      */
@@ -744,7 +747,9 @@
 	RPSM_EVENT_ADDRESS_DISC = 16,   /*  Need to Discover rport's PID */
 	RPSM_EVENT_PRLO_RCVD   = 17,    /*  PRLO from remote device     */
 	RPSM_EVENT_PLOGI_RETRY = 18,    /*  Retry PLOGI continuously */
-	RPSM_EVENT_FC4_FCS_ONLINE = 19, /*!< FC-4 FCS online complete */
+	RPSM_EVENT_SCN_OFFLINE = 19,	/* loop scn offline		*/
+	RPSM_EVENT_SCN_ONLINE   = 20,	/* loop scn online		*/
+	RPSM_EVENT_FC4_FCS_ONLINE = 21, /* FC-4 FCS online complete */
 };
 
 /*
@@ -763,7 +768,7 @@
 	BFA_FCS_ITNIM_SM_DELETE = 10,   /*  delete event from rport */
 	BFA_FCS_ITNIM_SM_PRLO = 11,     /*  delete event from rport */
 	BFA_FCS_ITNIM_SM_RSP_NOT_SUPP = 12, /* cmd not supported rsp */
-	BFA_FCS_ITNIM_SM_HAL_ONLINE = 13, /*!< bfa rport online event */
+	BFA_FCS_ITNIM_SM_HAL_ONLINE = 13, /* bfa rport online event */
 };
 
 /*
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index 3b75f6f..1224d04 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -23,6 +23,34 @@
 
 BFA_TRC_FILE(FCS, PORT);
 
+/*
+ * ALPA to LIXA bitmap mapping
+ *
+ * ALPA 0x00 (Word 0, Bit 30) is invalid for N_Ports. Also Word 0 Bit 31
+ * is for L_bit (login required) and is filled as ALPA 0x00 here.
+ */
+static const u8 loop_alpa_map[] = {
+	0x00, 0x00, 0x01, 0x02, 0x04, 0x08, 0x0F, 0x10, /* Word 0 Bits 31..24 */
+	0x17, 0x18, 0x1B, 0x1D, 0x1E, 0x1F, 0x23, 0x25, /* Word 0 Bits 23..16 */
+	0x26, 0x27, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, /* Word 0 Bits 15..08 */
+	0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x39, 0x3A, /* Word 0 Bits 07..00 */
+
+	0x3C, 0x43, 0x45, 0x46, 0x47, 0x49, 0x4A, 0x4B, /* Word 1 Bits 31..24 */
+	0x4C, 0x4D, 0x4E, 0x51, 0x52, 0x53, 0x54, 0x55, /* Word 1 Bits 23..16 */
+	0x56, 0x59, 0x5A, 0x5C, 0x63, 0x65, 0x66, 0x67, /* Word 1 Bits 15..08 */
+	0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x71, 0x72, /* Word 1 Bits 07..00 */
+
+	0x73, 0x74, 0x75, 0x76, 0x79, 0x7A, 0x7C, 0x80, /* Word 2 Bits 31..24 */
+	0x81, 0x82, 0x84, 0x88, 0x8F, 0x90, 0x97, 0x98, /* Word 2 Bits 23..16 */
+	0x9B, 0x9D, 0x9E, 0x9F, 0xA3, 0xA5, 0xA6, 0xA7, /* Word 2 Bits 15..08 */
+	0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xB1, 0xB2, /* Word 2 Bits 07..00 */
+
+	0xB3, 0xB4, 0xB5, 0xB6, 0xB9, 0xBA, 0xBC, 0xC3, /* Word 3 Bits 31..24 */
+	0xC5, 0xC6, 0xC7, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, /* Word 3 Bits 23..16 */
+	0xCE, 0xD1, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD9, /* Word 3 Bits 15..08 */
+	0xDA, 0xDC, 0xE0, 0xE1, 0xE2, 0xE4, 0xE8, 0xEF, /* Word 3 Bits 07..00 */
+};
+
 static void     bfa_fcs_lport_send_ls_rjt(struct bfa_fcs_lport_s *port,
 					 struct fchs_s *rx_fchs, u8 reason_code,
 					 u8 reason_code_expl);
@@ -51,6 +79,10 @@
 static void	bfa_fcs_lport_n2n_online(struct bfa_fcs_lport_s *port);
 static void	bfa_fcs_lport_n2n_offline(struct bfa_fcs_lport_s *port);
 
+static void	bfa_fcs_lport_loop_init(struct bfa_fcs_lport_s *port);
+static void	bfa_fcs_lport_loop_online(struct bfa_fcs_lport_s *port);
+static void	bfa_fcs_lport_loop_offline(struct bfa_fcs_lport_s *port);
+
 static struct {
 	void		(*init) (struct bfa_fcs_lport_s *port);
 	void		(*online) (struct bfa_fcs_lport_s *port);
@@ -62,7 +94,9 @@
 	bfa_fcs_lport_fab_init, bfa_fcs_lport_fab_online,
 			bfa_fcs_lport_fab_offline}, {
 	bfa_fcs_lport_n2n_init, bfa_fcs_lport_n2n_online,
-			bfa_fcs_lport_n2n_offline},
+			bfa_fcs_lport_n2n_offline}, {
+	bfa_fcs_lport_loop_init, bfa_fcs_lport_loop_online,
+			bfa_fcs_lport_loop_offline},
 	};
 
 /*
@@ -1127,7 +1161,7 @@
 bfa_fcs_lport_fab_online(struct bfa_fcs_lport_s *port)
 {
 	bfa_fcs_lport_ns_online(port);
-	bfa_fcs_lport_scn_online(port);
+	bfa_fcs_lport_fab_scn_online(port);
 }
 
 /*
@@ -1221,6 +1255,98 @@
 	n2n_port->reply_oxid = 0;
 }
 
+void
+bfa_fcport_get_loop_attr(struct bfa_fcs_lport_s *port)
+{
+	int i = 0, j = 0, bit = 0, alpa_bit = 0;
+	u8 k = 0;
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(port->fcs->bfa);
+
+	port->port_topo.ploop.alpabm_valid = fcport->alpabm_valid;
+	port->pid = fcport->myalpa;
+	port->pid = bfa_hton3b(port->pid);
+
+	for (i = 0; i < (FC_ALPA_MAX / 8); i++) {
+		for (j = 0, alpa_bit = 0; j < 8; j++, alpa_bit++) {
+			bfa_trc(port->fcs->bfa, fcport->alpabm.alpa_bm[i]);
+			bit = (fcport->alpabm.alpa_bm[i] & (1 << (7 - j)));
+			if (bit) {
+				port->port_topo.ploop.alpa_pos_map[k] =
+					loop_alpa_map[(i * 8) + alpa_bit];
+				k++;
+				bfa_trc(port->fcs->bfa, k);
+				bfa_trc(port->fcs->bfa,
+					 port->port_topo.ploop.alpa_pos_map[k]);
+			}
+		}
+	}
+	port->port_topo.ploop.num_alpa = k;
+}
+
+/*
+ * Called by fcs/port to initialize Loop topology.
+ */
+static void
+bfa_fcs_lport_loop_init(struct bfa_fcs_lport_s *port)
+{
+}
+
+/*
+ * Called by fcs/port to notify transition to online state.
+ */
+static void
+bfa_fcs_lport_loop_online(struct bfa_fcs_lport_s *port)
+{
+	u8 num_alpa = 0, alpabm_valid = 0;
+	struct bfa_fcs_rport_s *rport;
+	u8 *alpa_map = NULL;
+	int i = 0;
+	u32 pid;
+
+	bfa_fcport_get_loop_attr(port);
+
+	num_alpa = port->port_topo.ploop.num_alpa;
+	alpabm_valid = port->port_topo.ploop.alpabm_valid;
+	alpa_map = port->port_topo.ploop.alpa_pos_map;
+
+	bfa_trc(port->fcs->bfa, port->pid);
+	bfa_trc(port->fcs->bfa, num_alpa);
+	if (alpabm_valid == 1) {
+		for (i = 0; i < num_alpa; i++) {
+			bfa_trc(port->fcs->bfa, alpa_map[i]);
+			if (alpa_map[i] != bfa_hton3b(port->pid)) {
+				pid = alpa_map[i];
+				bfa_trc(port->fcs->bfa, pid);
+				rport = bfa_fcs_lport_get_rport_by_pid(port,
+						bfa_hton3b(pid));
+				if (!rport)
+					rport = bfa_fcs_rport_create(port,
+						bfa_hton3b(pid));
+			}
+		}
+	} else {
+		for (i = 0; i < MAX_ALPA_COUNT; i++) {
+			if (alpa_map[i] != port->pid) {
+				pid = loop_alpa_map[i];
+				bfa_trc(port->fcs->bfa, pid);
+				rport = bfa_fcs_lport_get_rport_by_pid(port,
+						bfa_hton3b(pid));
+				if (!rport)
+					rport = bfa_fcs_rport_create(port,
+						bfa_hton3b(pid));
+			}
+		}
+	}
+}
+
+/*
+ * Called by fcs/port to notify transition to offline state.
+ */
+static void
+bfa_fcs_lport_loop_offline(struct bfa_fcs_lport_s *port)
+{
+}
+
 #define BFA_FCS_FDMI_CMD_MAX_RETRIES 2
 
 /*
@@ -1888,13 +2014,10 @@
 					 sizeof(templen));
 	}
 
-	/*
-	 * f/w Version = driver version
-	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_HBA_ATTRIB_FW_VERSION);
-	templen = (u16) strlen(fcs_hba_attr->driver_version);
-	memcpy(attr->value, fcs_hba_attr->driver_version, templen);
+	templen = (u16) strlen(fcs_hba_attr->fw_version);
+	memcpy(attr->value, fcs_hba_attr->fw_version, templen);
 	templen = fc_roundup(templen, sizeof(u32));
 	curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
 	len += templen;
@@ -2296,6 +2419,7 @@
 {
 	struct bfa_fcs_lport_s *port = fdmi->ms->port;
 	struct bfa_fcs_driver_info_s  *driver_info = &port->fcs->driver_info;
+	struct bfa_fcs_fdmi_port_attr_s fcs_port_attr;
 
 	memset(hba_attr, 0, sizeof(struct bfa_fcs_fdmi_hba_attr_s));
 
@@ -2331,7 +2455,9 @@
 				sizeof(driver_info->host_os_patch));
 	}
 
-	hba_attr->max_ct_pyld = cpu_to_be32(FC_MAX_PDUSZ);
+	/* Retrieve the max frame size from the port attr */
+	bfa_fcs_fdmi_get_portattr(fdmi, &fcs_port_attr);
+	hba_attr->max_ct_pyld = fcs_port_attr.max_frm_size;
 }
 
 static void
@@ -2391,7 +2517,7 @@
 	/*
 	 * Max PDU Size.
 	 */
-	port_attr->max_frm_size = cpu_to_be32(FC_MAX_PDUSZ);
+	port_attr->max_frm_size = cpu_to_be32(pport_attr.pport_cfg.maxfrsize);
 
 	/*
 	 * OS device Name
@@ -5199,7 +5325,7 @@
 }
 
 void
-bfa_fcs_lport_scn_online(struct bfa_fcs_lport_s *port)
+bfa_fcs_lport_fab_scn_online(struct bfa_fcs_lport_s *port)
 {
 	struct bfa_fcs_lport_scn_s *scn = BFA_FCS_GET_SCN_FROM_PORT(port);
 
@@ -5621,6 +5747,15 @@
 }
 
 /*
+ * Let new loop map create missing rports
+ */
+void
+bfa_fcs_lport_lip_scn_online(struct bfa_fcs_lport_s *port)
+{
+	bfa_fcs_lport_loop_online(port);
+}
+
+/*
  * FCS virtual port state machine
  */
 
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index cc43b2a..58ac643 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -106,9 +106,13 @@
 						 enum rport_event event);
 static void	bfa_fcs_rport_sm_nsquery(struct bfa_fcs_rport_s *rport,
 					 enum rport_event event);
-static void	bfa_fcs_rport_sm_adisc_sending(struct bfa_fcs_rport_s *rport,
-						enum rport_event event);
-static void	bfa_fcs_rport_sm_adisc(struct bfa_fcs_rport_s *rport,
+static void	bfa_fcs_rport_sm_adisc_online_sending(
+			struct bfa_fcs_rport_s *rport, enum rport_event event);
+static void	bfa_fcs_rport_sm_adisc_online(struct bfa_fcs_rport_s *rport,
+					enum rport_event event);
+static void	bfa_fcs_rport_sm_adisc_offline_sending(struct bfa_fcs_rport_s
+					*rport, enum rport_event event);
+static void	bfa_fcs_rport_sm_adisc_offline(struct bfa_fcs_rport_s *rport,
 					enum rport_event event);
 static void	bfa_fcs_rport_sm_fc4_logorcv(struct bfa_fcs_rport_s *rport,
 						enum rport_event event);
@@ -150,8 +154,10 @@
 	{BFA_SM(bfa_fcs_rport_sm_online), BFA_RPORT_ONLINE},
 	{BFA_SM(bfa_fcs_rport_sm_nsquery_sending), BFA_RPORT_NSQUERY},
 	{BFA_SM(bfa_fcs_rport_sm_nsquery), BFA_RPORT_NSQUERY},
-	{BFA_SM(bfa_fcs_rport_sm_adisc_sending), BFA_RPORT_ADISC},
-	{BFA_SM(bfa_fcs_rport_sm_adisc), BFA_RPORT_ADISC},
+	{BFA_SM(bfa_fcs_rport_sm_adisc_online_sending), BFA_RPORT_ADISC},
+	{BFA_SM(bfa_fcs_rport_sm_adisc_online), BFA_RPORT_ADISC},
+	{BFA_SM(bfa_fcs_rport_sm_adisc_offline_sending), BFA_RPORT_ADISC},
+	{BFA_SM(bfa_fcs_rport_sm_adisc_offline), BFA_RPORT_ADISC},
 	{BFA_SM(bfa_fcs_rport_sm_fc4_logorcv), BFA_RPORT_LOGORCV},
 	{BFA_SM(bfa_fcs_rport_sm_fc4_logosend), BFA_RPORT_LOGO},
 	{BFA_SM(bfa_fcs_rport_sm_fc4_offline), BFA_RPORT_OFFLINE},
@@ -231,10 +237,19 @@
 		bfa_fcs_rport_send_plogiacc(rport, NULL);
 		break;
 
+	case RPSM_EVENT_SCN_OFFLINE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				bfa_fcs_rport_del_timeout);
+		break;
 	case RPSM_EVENT_ADDRESS_CHANGE:
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 		/* query the NS */
 		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		WARN_ON(!(bfa_fcport_get_topology(rport->port->fcs->bfa) !=
+					BFA_PORT_TOPOLOGY_LOOP));
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
 		rport->ns_retries = 0;
 		bfa_fcs_rport_send_nsdisc(rport, NULL);
@@ -280,12 +295,20 @@
 
 	case RPSM_EVENT_PLOGI_RCVD:
 	case RPSM_EVENT_PLOGI_COMP:
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 		/*
 		 * Ignore, SCN is possibly online notification.
 		 */
 		break;
 
+	case RPSM_EVENT_SCN_OFFLINE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				bfa_fcs_rport_del_timeout);
+		break;
+
 	case RPSM_EVENT_ADDRESS_CHANGE:
 		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
@@ -346,9 +369,19 @@
 		bfa_fcs_rport_send_plogiacc(rport, NULL);
 		break;
 
-	case RPSM_EVENT_ADDRESS_CHANGE:
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_SCN_OFFLINE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
 		bfa_timer_stop(&rport->timer);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				bfa_fcs_rport_del_timeout);
+		break;
+
+	case RPSM_EVENT_ADDRESS_CHANGE:
+	case RPSM_EVENT_FAB_SCN:
+		bfa_timer_stop(&rport->timer);
+		WARN_ON(!(bfa_fcport_get_topology(rport->port->fcs->bfa) !=
+					BFA_PORT_TOPOLOGY_LOOP));
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
 		rport->ns_retries = 0;
 		bfa_fcs_rport_send_nsdisc(rport, NULL);
@@ -422,7 +455,18 @@
 		}
 		break;
 
-	case	RPSM_EVENT_PLOGI_RETRY:
+	case RPSM_EVENT_SCN_ONLINE:
+		break;
+
+	case RPSM_EVENT_SCN_OFFLINE:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+				bfa_fcs_rport_timeout, rport,
+				bfa_fcs_rport_del_timeout);
+		break;
+
+	case RPSM_EVENT_PLOGI_RETRY:
 		rport->plogi_retries = 0;
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_retry);
 		bfa_timer_start(rport->fcs->bfa, &rport->timer,
@@ -440,8 +484,10 @@
 		break;
 
 	case RPSM_EVENT_ADDRESS_CHANGE:
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 		bfa_fcxp_discard(rport->fcxp);
+		WARN_ON(!(bfa_fcport_get_topology(rport->port->fcs->bfa) !=
+					BFA_PORT_TOPOLOGY_LOOP));
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
 		rport->ns_retries = 0;
 		bfa_fcs_rport_send_nsdisc(rport, NULL);
@@ -512,7 +558,8 @@
 	case RPSM_EVENT_PLOGI_COMP:
 	case RPSM_EVENT_LOGO_IMP:
 	case RPSM_EVENT_ADDRESS_CHANGE:
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
+	case RPSM_EVENT_SCN_OFFLINE:
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
 		bfa_fcs_rport_fcs_offline_action(rport);
 		break;
@@ -561,9 +608,10 @@
 		bfa_fcs_rport_fcs_offline_action(rport);
 		break;
 
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 	case RPSM_EVENT_LOGO_IMP:
 	case RPSM_EVENT_ADDRESS_CHANGE:
+	case RPSM_EVENT_SCN_OFFLINE:
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
 		bfa_fcs_rport_fcs_offline_action(rport);
 		break;
@@ -595,14 +643,15 @@
 	bfa_trc(rport->fcs, event);
 
 	switch (event) {
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 		if (bfa_fcs_fabric_is_switched(rport->port->fabric)) {
 			bfa_sm_set_state(rport,
 					 bfa_fcs_rport_sm_nsquery_sending);
 			rport->ns_retries = 0;
 			bfa_fcs_rport_send_nsdisc(rport, NULL);
 		} else {
-			bfa_sm_set_state(rport, bfa_fcs_rport_sm_adisc_sending);
+			bfa_sm_set_state(rport,
+				bfa_fcs_rport_sm_adisc_online_sending);
 			bfa_fcs_rport_send_adisc(rport, NULL);
 		}
 		break;
@@ -610,6 +659,7 @@
 	case RPSM_EVENT_PLOGI_RCVD:
 	case RPSM_EVENT_LOGO_IMP:
 	case RPSM_EVENT_ADDRESS_CHANGE:
+	case RPSM_EVENT_SCN_OFFLINE:
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
 		bfa_fcs_rport_hal_offline_action(rport);
 		break;
@@ -625,6 +675,7 @@
 		bfa_fcs_rport_hal_offline_action(rport);
 		break;
 
+	case RPSM_EVENT_SCN_ONLINE:
 	case RPSM_EVENT_PLOGI_COMP:
 		break;
 
@@ -656,7 +707,7 @@
 		bfa_fcs_rport_hal_offline_action(rport);
 		break;
 
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 		/*
 		 * ignore SCN, wait for response to query itself
 		 */
@@ -696,7 +747,7 @@
 
 	switch (event) {
 	case RPSM_EVENT_ACCEPTED:
-		bfa_sm_set_state(rport, bfa_fcs_rport_sm_adisc_sending);
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_adisc_online_sending);
 		bfa_fcs_rport_send_adisc(rport, NULL);
 		break;
 
@@ -718,7 +769,7 @@
 		bfa_fcs_rport_hal_offline_action(rport);
 		break;
 
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 		break;
 
 	case RPSM_EVENT_LOGO_RCVD:
@@ -747,7 +798,7 @@
  *	authenticating with rport. FC-4s are paused.
  */
 static void
-bfa_fcs_rport_sm_adisc_sending(struct bfa_fcs_rport_s *rport,
+bfa_fcs_rport_sm_adisc_online_sending(struct bfa_fcs_rport_s *rport,
 	 enum rport_event event)
 {
 	bfa_trc(rport->fcs, rport->pwwn);
@@ -756,7 +807,7 @@
 
 	switch (event) {
 	case RPSM_EVENT_FCXP_SENT:
-		bfa_sm_set_state(rport, bfa_fcs_rport_sm_adisc);
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_adisc_online);
 		break;
 
 	case RPSM_EVENT_DELETE:
@@ -779,7 +830,7 @@
 		bfa_fcs_rport_hal_offline_action(rport);
 		break;
 
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 		break;
 
 	case RPSM_EVENT_PLOGI_RCVD:
@@ -798,7 +849,8 @@
  *		FC-4s are paused.
  */
 static void
-bfa_fcs_rport_sm_adisc(struct bfa_fcs_rport_s *rport, enum rport_event event)
+bfa_fcs_rport_sm_adisc_online(struct bfa_fcs_rport_s *rport,
+				enum rport_event event)
 {
 	bfa_trc(rport->fcs, rport->pwwn);
 	bfa_trc(rport->fcs, rport->pid);
@@ -831,7 +883,7 @@
 		bfa_fcs_rport_hal_offline_action(rport);
 		break;
 
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 		/*
 		 * already processing RSCN
 		 */
@@ -856,7 +908,96 @@
 }
 
 /*
- *		Rport has sent LOGO. Awaiting FC-4 offline completion callback.
+ * ADISC is being sent for authenticating with rport
+ * Already did offline actions.
+ */
+static void
+bfa_fcs_rport_sm_adisc_offline_sending(struct bfa_fcs_rport_s *rport,
+	enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_FCXP_SENT:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_adisc_offline);
+		break;
+
+	case RPSM_EVENT_DELETE:
+	case RPSM_EVENT_SCN_OFFLINE:
+	case RPSM_EVENT_LOGO_IMP:
+	case RPSM_EVENT_LOGO_RCVD:
+	case RPSM_EVENT_PRLO_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa,
+			&rport->fcxp_wqe);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+			bfa_fcs_rport_timeout, rport,
+			bfa_fcs_rport_del_timeout);
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+		bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+		bfa_fcs_rport_send_plogiacc(rport, NULL);
+		break;
+
+	default:
+		bfa_sm_fault(rport->fcs, event);
+	}
+}
+
+/*
+ * ADISC to rport
+ * Already did offline actions
+ */
+static void
+bfa_fcs_rport_sm_adisc_offline(struct bfa_fcs_rport_s *rport,
+			enum rport_event event)
+{
+	bfa_trc(rport->fcs, rport->pwwn);
+	bfa_trc(rport->fcs, rport->pid);
+	bfa_trc(rport->fcs, event);
+
+	switch (event) {
+	case RPSM_EVENT_ACCEPTED:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+		bfa_fcs_rport_hal_online(rport);
+		break;
+
+	case RPSM_EVENT_PLOGI_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_fcs_rport_send_plogiacc(rport, NULL);
+		break;
+
+	case RPSM_EVENT_FAILED:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+			bfa_fcs_rport_timeout, rport,
+			bfa_fcs_rport_del_timeout);
+		break;
+
+	case RPSM_EVENT_DELETE:
+	case RPSM_EVENT_SCN_OFFLINE:
+	case RPSM_EVENT_LOGO_IMP:
+	case RPSM_EVENT_LOGO_RCVD:
+	case RPSM_EVENT_PRLO_RCVD:
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+		bfa_fcxp_discard(rport->fcxp);
+		bfa_timer_start(rport->fcs->bfa, &rport->timer,
+			bfa_fcs_rport_timeout, rport,
+			bfa_fcs_rport_del_timeout);
+		break;
+
+	default:
+		bfa_sm_fault(rport->fcs, event);
+	}
+}
+
+/*
+ * Rport has sent LOGO. Awaiting FC-4 offline completion callback.
  */
 static void
 bfa_fcs_rport_sm_fc4_logorcv(struct bfa_fcs_rport_s *rport,
@@ -881,6 +1022,8 @@
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_off_delete);
 		break;
 
+	case RPSM_EVENT_SCN_ONLINE:
+	case RPSM_EVENT_SCN_OFFLINE:
 	case RPSM_EVENT_HCB_ONLINE:
 	case RPSM_EVENT_LOGO_RCVD:
 	case RPSM_EVENT_PRLO_RCVD:
@@ -945,6 +1088,8 @@
 		bfa_fcs_rport_hal_offline(rport);
 		break;
 
+	case RPSM_EVENT_SCN_ONLINE:
+		break;
 	case RPSM_EVENT_LOGO_RCVD:
 		/*
 		 * Rport is going offline. Just ack the logo
@@ -956,8 +1101,9 @@
 		bfa_fcs_rport_send_prlo_acc(rport);
 		break;
 
+	case RPSM_EVENT_SCN_OFFLINE:
 	case RPSM_EVENT_HCB_ONLINE:
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 	case RPSM_EVENT_LOGO_IMP:
 	case RPSM_EVENT_ADDRESS_CHANGE:
 		/*
@@ -1015,6 +1161,19 @@
 				bfa_fcs_rport_sm_nsdisc_sending);
 			rport->ns_retries = 0;
 			bfa_fcs_rport_send_nsdisc(rport, NULL);
+		} else if (bfa_fcport_get_topology(rport->port->fcs->bfa) ==
+					BFA_PORT_TOPOLOGY_LOOP) {
+			if (rport->scn_online) {
+				bfa_sm_set_state(rport,
+					bfa_fcs_rport_sm_adisc_offline_sending);
+				bfa_fcs_rport_send_adisc(rport, NULL);
+			} else {
+				bfa_sm_set_state(rport,
+					bfa_fcs_rport_sm_offline);
+				bfa_timer_start(rport->fcs->bfa, &rport->timer,
+					bfa_fcs_rport_timeout, rport,
+					bfa_fcs_rport_del_timeout);
+			}
 		} else {
 			bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_sending);
 			rport->plogi_retries = 0;
@@ -1027,7 +1186,9 @@
 		bfa_fcs_rport_free(rport);
 		break;
 
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_SCN_ONLINE:
+	case RPSM_EVENT_SCN_OFFLINE:
+	case RPSM_EVENT_FAB_SCN:
 	case RPSM_EVENT_LOGO_RCVD:
 	case RPSM_EVENT_PRLO_RCVD:
 	case RPSM_EVENT_PLOGI_RCVD:
@@ -1106,6 +1267,8 @@
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_offline);
 		break;
 
+	case RPSM_EVENT_SCN_ONLINE:
+	case RPSM_EVENT_SCN_OFFLINE:
 	case RPSM_EVENT_LOGO_RCVD:
 	case RPSM_EVENT_PRLO_RCVD:
 		/*
@@ -1146,6 +1309,8 @@
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_delete_pending);
 		break;
 
+	case RPSM_EVENT_SCN_ONLINE:
+	case RPSM_EVENT_SCN_OFFLINE:
 	case RPSM_EVENT_ADDRESS_CHANGE:
 		break;
 
@@ -1172,7 +1337,9 @@
 		bfa_fcs_rport_free(rport);
 		break;
 
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_SCN_ONLINE:
+	case RPSM_EVENT_SCN_OFFLINE:
+	case RPSM_EVENT_FAB_SCN:
 	case RPSM_EVENT_ADDRESS_CHANGE:
 		break;
 
@@ -1209,10 +1376,12 @@
 		bfa_fcs_rport_free(rport);
 		break;
 
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 	case RPSM_EVENT_ADDRESS_CHANGE:
-		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
 		bfa_timer_stop(&rport->timer);
+		WARN_ON(!(bfa_fcport_get_topology(rport->port->fcs->bfa) !=
+					BFA_PORT_TOPOLOGY_LOOP));
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
 		rport->ns_retries = 0;
 		bfa_fcs_rport_send_nsdisc(rport, NULL);
 		break;
@@ -1232,6 +1401,7 @@
 	case RPSM_EVENT_LOGO_RCVD:
 	case RPSM_EVENT_PRLO_RCVD:
 	case RPSM_EVENT_LOGO_IMP:
+	case RPSM_EVENT_SCN_OFFLINE:
 		break;
 
 	case RPSM_EVENT_PLOGI_COMP:
@@ -1240,6 +1410,12 @@
 		bfa_fcs_rport_fcs_online_action(rport);
 		break;
 
+	case RPSM_EVENT_SCN_ONLINE:
+		bfa_timer_stop(&rport->timer);
+		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_sending);
+		bfa_fcs_rport_send_plogi(rport, NULL);
+		break;
+
 	case RPSM_EVENT_PLOGI_SEND:
 		bfa_timer_stop(&rport->timer);
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_sending);
@@ -1280,7 +1456,7 @@
 		bfa_fcs_rport_send_plogiacc(rport, NULL);
 		break;
 
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 	case RPSM_EVENT_LOGO_RCVD:
 	case RPSM_EVENT_PRLO_RCVD:
 	case RPSM_EVENT_PLOGI_SEND:
@@ -1326,7 +1502,7 @@
 		bfa_fcs_rport_send_nsdisc(rport, NULL);
 		break;
 
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 	case RPSM_EVENT_ADDRESS_CHANGE:
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
 		bfa_timer_stop(&rport->timer);
@@ -1439,7 +1615,7 @@
 	case RPSM_EVENT_PRLO_RCVD:
 		bfa_fcs_rport_send_prlo_acc(rport);
 		break;
-	case RPSM_EVENT_SCN:
+	case RPSM_EVENT_FAB_SCN:
 		/*
 		 * ignore, wait for NS query response
 		 */
@@ -2546,7 +2722,7 @@
 bfa_fcs_rport_scn(struct bfa_fcs_rport_s *rport)
 {
 	rport->stats.rscns++;
-	bfa_sm_send_event(rport, RPSM_EVENT_SCN);
+	bfa_sm_send_event(rport, RPSM_EVENT_FAB_SCN);
 }
 
 /*
@@ -2621,6 +2797,48 @@
 	bfa_fcs_rport_aen_post(rport, BFA_RPORT_AEN_QOS_FLOWID, &aen_data);
 }
 
+void
+bfa_cb_rport_scn_online(struct bfa_s *bfa)
+{
+	struct bfa_fcs_s *fcs = &((struct bfad_s *)bfa->bfad)->bfa_fcs;
+	struct bfa_fcs_lport_s *port = bfa_fcs_get_base_port(fcs);
+	struct bfa_fcs_rport_s *rp;
+	struct list_head *qe;
+
+	list_for_each(qe, &port->rport_q) {
+		rp = (struct bfa_fcs_rport_s *) qe;
+		bfa_sm_send_event(rp, RPSM_EVENT_SCN_ONLINE);
+		rp->scn_online = BFA_TRUE;
+	}
+
+	if (bfa_fcs_lport_is_online(port))
+		bfa_fcs_lport_lip_scn_online(port);
+}
+
+void
+bfa_cb_rport_scn_no_dev(void *rport)
+{
+	struct bfa_fcs_rport_s *rp = rport;
+
+	bfa_sm_send_event(rp, RPSM_EVENT_SCN_OFFLINE);
+	rp->scn_online = BFA_FALSE;
+}
+
+void
+bfa_cb_rport_scn_offline(struct bfa_s *bfa)
+{
+	struct bfa_fcs_s *fcs = &((struct bfad_s *)bfa->bfad)->bfa_fcs;
+	struct bfa_fcs_lport_s *port = bfa_fcs_get_base_port(fcs);
+	struct bfa_fcs_rport_s *rp;
+	struct list_head *qe;
+
+	list_for_each(qe, &port->rport_q) {
+		rp = (struct bfa_fcs_rport_s *) qe;
+		bfa_sm_send_event(rp, RPSM_EVENT_SCN_OFFLINE);
+		rp->scn_online = BFA_FALSE;
+	}
+}
+
 /*
  *	brief
  *	This routine is a static BFA callback when there is a QoS priority
@@ -2808,6 +3026,9 @@
 	struct bfa_rport_qos_attr_s qos_attr;
 	struct bfa_fcs_lport_s *port = rport->port;
 	bfa_port_speed_t rport_speed = rport->rpf.rpsc_speed;
+	struct bfa_port_attr_s port_attr;
+
+	bfa_fcport_get_attr(rport->fcs->bfa, &port_attr);
 
 	memset(rport_attr, 0, sizeof(struct bfa_rport_attr_s));
 	memset(&qos_attr, 0, sizeof(struct bfa_rport_qos_attr_s));
@@ -2838,7 +3059,8 @@
 			rport_speed =
 				bfa_fcport_get_ratelim_speed(rport->fcs->bfa);
 
-		if (rport_speed < bfa_fcs_lport_get_rport_max_speed(port))
+		if ((bfa_fcs_lport_get_rport_max_speed(port) !=
+		    BFA_PORT_SPEED_UNKNOWN) && (rport_speed < port_attr.speed))
 			rport_attr->trl_enforced = BFA_TRUE;
 	}
 }
diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c
index 75ca875..0116c10 100644
--- a/drivers/scsi/bfa/bfa_ioc.c
+++ b/drivers/scsi/bfa/bfa_ioc.c
@@ -731,8 +731,7 @@
 	/*
 	 * Unlock the hw semaphore. Should be here only once per boot.
 	 */
-	readl(iocpf->ioc->ioc_regs.ioc_sem_reg);
-	writel(1, iocpf->ioc->ioc_regs.ioc_sem_reg);
+	bfa_ioc_ownership_reset(iocpf->ioc);
 
 	/*
 	 * unlock init semaphore.
@@ -1751,6 +1750,7 @@
 	attr->card_type     = be32_to_cpu(attr->card_type);
 	attr->maxfrsize	    = be16_to_cpu(attr->maxfrsize);
 	ioc->fcmode	= (attr->port_mode == BFI_PORT_MODE_FC);
+	attr->mfg_year	= be16_to_cpu(attr->mfg_year);
 
 	bfa_fsm_send_event(ioc, IOC_E_FWRSP_GETATTR);
 }
@@ -2497,6 +2497,9 @@
 	ad_attr->cna_capable = bfa_ioc_is_cna(ioc);
 	ad_attr->trunk_capable = (ad_attr->nports > 1) &&
 				  !bfa_ioc_is_cna(ioc) && !ad_attr->is_mezz;
+	ad_attr->mfg_day = ioc_attr->mfg_day;
+	ad_attr->mfg_month = ioc_attr->mfg_month;
+	ad_attr->mfg_year = ioc_attr->mfg_year;
 }
 
 enum bfa_ioc_type_e
@@ -2923,7 +2926,7 @@
 		return;
 	}
 
-	if (ioc->iocpf.poll_time >= BFA_IOC_TOV)
+	if (ioc->iocpf.poll_time >= (3 * BFA_IOC_TOV))
 		bfa_iocpf_timeout(ioc);
 	else {
 		ioc->iocpf.poll_time += BFA_IOC_POLL_TOV;
@@ -3016,7 +3019,6 @@
 	struct bfa_ablk_cfg_inst_s *cfg_inst;
 	int i, j;
 	u16	be16;
-	u32	be32;
 
 	for (i = 0; i < BFA_ABLK_MAX; i++) {
 		cfg_inst = &cfg->inst[i];
@@ -3027,8 +3029,10 @@
 			cfg_inst->pf_cfg[j].num_qpairs = be16_to_cpu(be16);
 			be16 = cfg_inst->pf_cfg[j].num_vectors;
 			cfg_inst->pf_cfg[j].num_vectors = be16_to_cpu(be16);
-			be32 = cfg_inst->pf_cfg[j].bw;
-			cfg_inst->pf_cfg[j].bw = be16_to_cpu(be32);
+			be16 = cfg_inst->pf_cfg[j].bw_min;
+			cfg_inst->pf_cfg[j].bw_min = be16_to_cpu(be16);
+			be16 = cfg_inst->pf_cfg[j].bw_max;
+			cfg_inst->pf_cfg[j].bw_max = be16_to_cpu(be16);
 		}
 	}
 }
@@ -3170,7 +3174,8 @@
 
 bfa_status_t
 bfa_ablk_pf_create(struct bfa_ablk_s *ablk, u16 *pcifn,
-		u8 port, enum bfi_pcifn_class personality, int bw,
+		u8 port, enum bfi_pcifn_class personality,
+		u16 bw_min, u16 bw_max,
 		bfa_ablk_cbfn_t cbfn, void *cbarg)
 {
 	struct bfi_ablk_h2i_pf_req_s *m;
@@ -3194,7 +3199,8 @@
 	bfi_h2i_set(m->mh, BFI_MC_ABLK, BFI_ABLK_H2I_PF_CREATE,
 		    bfa_ioc_portid(ablk->ioc));
 	m->pers = cpu_to_be16((u16)personality);
-	m->bw = cpu_to_be32(bw);
+	m->bw_min = cpu_to_be16(bw_min);
+	m->bw_max = cpu_to_be16(bw_max);
 	m->port = port;
 	bfa_ioc_mbox_queue(ablk->ioc, &ablk->mb);
 
@@ -3294,8 +3300,8 @@
 }
 
 bfa_status_t
-bfa_ablk_pf_update(struct bfa_ablk_s *ablk, int pcifn, int bw,
-		bfa_ablk_cbfn_t cbfn, void *cbarg)
+bfa_ablk_pf_update(struct bfa_ablk_s *ablk, int pcifn, u16 bw_min,
+		   u16 bw_max, bfa_ablk_cbfn_t cbfn, void *cbarg)
 {
 	struct bfi_ablk_h2i_pf_req_s *m;
 
@@ -3317,7 +3323,8 @@
 	bfi_h2i_set(m->mh, BFI_MC_ABLK, BFI_ABLK_H2I_PF_UPDATE,
 		bfa_ioc_portid(ablk->ioc));
 	m->pcifn = (u8)pcifn;
-	m->bw = cpu_to_be32(bw);
+	m->bw_min = cpu_to_be16(bw_min);
+	m->bw_max = cpu_to_be16(bw_max);
 	bfa_ioc_mbox_queue(ablk->ioc, &ablk->mb);
 
 	return BFA_STATUS_OK;
@@ -4680,22 +4687,25 @@
 	diag->tsensor.temp->temp = be16_to_cpu(rsp->temp);
 	diag->tsensor.temp->ts_junc = rsp->ts_junc;
 	diag->tsensor.temp->ts_brd = rsp->ts_brd;
-	diag->tsensor.temp->status = BFA_STATUS_OK;
 
 	if (rsp->ts_brd) {
+		/* tsensor.temp->status is brd_temp status */
+		diag->tsensor.temp->status = rsp->status;
 		if (rsp->status == BFA_STATUS_OK) {
 			diag->tsensor.temp->brd_temp =
 				be16_to_cpu(rsp->brd_temp);
-		} else {
-			bfa_trc(diag, rsp->status);
+		} else
 			diag->tsensor.temp->brd_temp = 0;
-			diag->tsensor.temp->status = BFA_STATUS_DEVBUSY;
-		}
 	}
+
+	bfa_trc(diag, rsp->status);
 	bfa_trc(diag, rsp->ts_junc);
 	bfa_trc(diag, rsp->temp);
 	bfa_trc(diag, rsp->ts_brd);
 	bfa_trc(diag, rsp->brd_temp);
+
+	/* tsensor status is always good bcos we always have junction temp */
+	diag->tsensor.status = BFA_STATUS_OK;
 	diag->tsensor.cbfn(diag->tsensor.cbarg, diag->tsensor.status);
 	diag->tsensor.lock = 0;
 }
@@ -4924,6 +4934,7 @@
 	diag->tsensor.temp = result;
 	diag->tsensor.cbfn = cbfn;
 	diag->tsensor.cbarg = cbarg;
+	diag->tsensor.status = BFA_STATUS_OK;
 
 	/* Send msg to fw */
 	diag_tempsensor_send(diag);
@@ -5615,7 +5626,7 @@
 		}
 		bfa_sm_set_state(dconf, bfa_dconf_sm_flash_read);
 		bfa_timer_start(dconf->bfa, &dconf->timer,
-			bfa_dconf_timer, dconf, BFA_DCONF_UPDATE_TOV);
+			bfa_dconf_timer, dconf, 2 * BFA_DCONF_UPDATE_TOV);
 		bfa_status = bfa_flash_read_part(BFA_FLASH(dconf->bfa),
 					BFA_FLASH_PART_DRV, dconf->instance,
 					dconf->dconf,
@@ -5655,7 +5666,7 @@
 		break;
 	case BFA_DCONF_SM_TIMEOUT:
 		bfa_sm_set_state(dconf, bfa_dconf_sm_ready);
-		bfa_fsm_send_event(&dconf->bfa->iocfc, IOCFC_E_IOC_FAILED);
+		bfa_ioc_suspend(&dconf->bfa->ioc);
 		break;
 	case BFA_DCONF_SM_EXIT:
 		bfa_timer_stop(&dconf->timer);
@@ -5853,7 +5864,6 @@
 	struct bfa_s *bfa = arg;
 	struct bfa_dconf_mod_s *dconf = BFA_DCONF_MOD(bfa);
 
-	bfa_sm_send_event(dconf, BFA_DCONF_SM_FLASH_COMP);
 	if (status == BFA_STATUS_OK) {
 		bfa_dconf_read_data_valid(bfa) = BFA_TRUE;
 		if (dconf->dconf->hdr.signature != BFI_DCONF_SIGNATURE)
@@ -5861,6 +5871,7 @@
 		if (dconf->dconf->hdr.version != BFI_DCONF_VERSION)
 			dconf->dconf->hdr.version = BFI_DCONF_VERSION;
 	}
+	bfa_sm_send_event(dconf, BFA_DCONF_SM_FLASH_COMP);
 	bfa_fsm_send_event(&bfa->iocfc, IOCFC_E_DCONF_DONE);
 }
 
@@ -5945,3 +5956,448 @@
 	struct bfa_dconf_mod_s *dconf = BFA_DCONF_MOD(bfa);
 	bfa_sm_send_event(dconf, BFA_DCONF_SM_EXIT);
 }
+
+/*
+ * FRU specific functions
+ */
+
+#define BFA_FRU_DMA_BUF_SZ	0x02000		/* 8k dma buffer */
+#define BFA_FRU_CHINOOK_MAX_SIZE 0x10000
+#define BFA_FRU_LIGHTNING_MAX_SIZE 0x200
+
+static void
+bfa_fru_notify(void *cbarg, enum bfa_ioc_event_e event)
+{
+	struct bfa_fru_s *fru = cbarg;
+
+	bfa_trc(fru, event);
+
+	switch (event) {
+	case BFA_IOC_E_DISABLED:
+	case BFA_IOC_E_FAILED:
+		if (fru->op_busy) {
+			fru->status = BFA_STATUS_IOC_FAILURE;
+			fru->cbfn(fru->cbarg, fru->status);
+			fru->op_busy = 0;
+		}
+		break;
+
+	default:
+		break;
+	}
+}
+
+/*
+ * Send fru write request.
+ *
+ * @param[in] cbarg - callback argument
+ */
+static void
+bfa_fru_write_send(void *cbarg, enum bfi_fru_h2i_msgs msg_type)
+{
+	struct bfa_fru_s *fru = cbarg;
+	struct bfi_fru_write_req_s *msg =
+			(struct bfi_fru_write_req_s *) fru->mb.msg;
+	u32 len;
+
+	msg->offset = cpu_to_be32(fru->addr_off + fru->offset);
+	len = (fru->residue < BFA_FRU_DMA_BUF_SZ) ?
+				fru->residue : BFA_FRU_DMA_BUF_SZ;
+	msg->length = cpu_to_be32(len);
+
+	/*
+	 * indicate if it's the last msg of the whole write operation
+	 */
+	msg->last = (len == fru->residue) ? 1 : 0;
+
+	bfi_h2i_set(msg->mh, BFI_MC_FRU, msg_type, bfa_ioc_portid(fru->ioc));
+	bfa_alen_set(&msg->alen, len, fru->dbuf_pa);
+
+	memcpy(fru->dbuf_kva, fru->ubuf + fru->offset, len);
+	bfa_ioc_mbox_queue(fru->ioc, &fru->mb);
+
+	fru->residue -= len;
+	fru->offset += len;
+}
+
+/*
+ * Send fru read request.
+ *
+ * @param[in] cbarg - callback argument
+ */
+static void
+bfa_fru_read_send(void *cbarg, enum bfi_fru_h2i_msgs msg_type)
+{
+	struct bfa_fru_s *fru = cbarg;
+	struct bfi_fru_read_req_s *msg =
+			(struct bfi_fru_read_req_s *) fru->mb.msg;
+	u32 len;
+
+	msg->offset = cpu_to_be32(fru->addr_off + fru->offset);
+	len = (fru->residue < BFA_FRU_DMA_BUF_SZ) ?
+				fru->residue : BFA_FRU_DMA_BUF_SZ;
+	msg->length = cpu_to_be32(len);
+	bfi_h2i_set(msg->mh, BFI_MC_FRU, msg_type, bfa_ioc_portid(fru->ioc));
+	bfa_alen_set(&msg->alen, len, fru->dbuf_pa);
+	bfa_ioc_mbox_queue(fru->ioc, &fru->mb);
+}
+
+/*
+ * Flash memory info API.
+ *
+ * @param[in] mincfg - minimal cfg variable
+ */
+u32
+bfa_fru_meminfo(bfa_boolean_t mincfg)
+{
+	/* min driver doesn't need fru */
+	if (mincfg)
+		return 0;
+
+	return BFA_ROUNDUP(BFA_FRU_DMA_BUF_SZ, BFA_DMA_ALIGN_SZ);
+}
+
+/*
+ * Flash attach API.
+ *
+ * @param[in] fru - fru structure
+ * @param[in] ioc  - ioc structure
+ * @param[in] dev  - device structure
+ * @param[in] trcmod - trace module
+ * @param[in] logmod - log module
+ */
+void
+bfa_fru_attach(struct bfa_fru_s *fru, struct bfa_ioc_s *ioc, void *dev,
+	struct bfa_trc_mod_s *trcmod, bfa_boolean_t mincfg)
+{
+	fru->ioc = ioc;
+	fru->trcmod = trcmod;
+	fru->cbfn = NULL;
+	fru->cbarg = NULL;
+	fru->op_busy = 0;
+
+	bfa_ioc_mbox_regisr(fru->ioc, BFI_MC_FRU, bfa_fru_intr, fru);
+	bfa_q_qe_init(&fru->ioc_notify);
+	bfa_ioc_notify_init(&fru->ioc_notify, bfa_fru_notify, fru);
+	list_add_tail(&fru->ioc_notify.qe, &fru->ioc->notify_q);
+
+	/* min driver doesn't need fru */
+	if (mincfg) {
+		fru->dbuf_kva = NULL;
+		fru->dbuf_pa = 0;
+	}
+}
+
+/*
+ * Claim memory for fru
+ *
+ * @param[in] fru - fru structure
+ * @param[in] dm_kva - pointer to virtual memory address
+ * @param[in] dm_pa - frusical memory address
+ * @param[in] mincfg - minimal cfg variable
+ */
+void
+bfa_fru_memclaim(struct bfa_fru_s *fru, u8 *dm_kva, u64 dm_pa,
+	bfa_boolean_t mincfg)
+{
+	if (mincfg)
+		return;
+
+	fru->dbuf_kva = dm_kva;
+	fru->dbuf_pa = dm_pa;
+	memset(fru->dbuf_kva, 0, BFA_FRU_DMA_BUF_SZ);
+	dm_kva += BFA_ROUNDUP(BFA_FRU_DMA_BUF_SZ, BFA_DMA_ALIGN_SZ);
+	dm_pa += BFA_ROUNDUP(BFA_FRU_DMA_BUF_SZ, BFA_DMA_ALIGN_SZ);
+}
+
+/*
+ * Update fru vpd image.
+ *
+ * @param[in] fru - fru structure
+ * @param[in] buf - update data buffer
+ * @param[in] len - data buffer length
+ * @param[in] offset - offset relative to starting address
+ * @param[in] cbfn - callback function
+ * @param[in] cbarg - callback argument
+ *
+ * Return status.
+ */
+bfa_status_t
+bfa_fruvpd_update(struct bfa_fru_s *fru, void *buf, u32 len, u32 offset,
+		  bfa_cb_fru_t cbfn, void *cbarg)
+{
+	bfa_trc(fru, BFI_FRUVPD_H2I_WRITE_REQ);
+	bfa_trc(fru, len);
+	bfa_trc(fru, offset);
+
+	if (fru->ioc->asic_gen != BFI_ASIC_GEN_CT2)
+		return BFA_STATUS_FRU_NOT_PRESENT;
+
+	if (fru->ioc->attr->card_type != BFA_MFG_TYPE_CHINOOK)
+		return BFA_STATUS_CMD_NOTSUPP;
+
+	if (!bfa_ioc_is_operational(fru->ioc))
+		return BFA_STATUS_IOC_NON_OP;
+
+	if (fru->op_busy) {
+		bfa_trc(fru, fru->op_busy);
+		return BFA_STATUS_DEVBUSY;
+	}
+
+	fru->op_busy = 1;
+
+	fru->cbfn = cbfn;
+	fru->cbarg = cbarg;
+	fru->residue = len;
+	fru->offset = 0;
+	fru->addr_off = offset;
+	fru->ubuf = buf;
+
+	bfa_fru_write_send(fru, BFI_FRUVPD_H2I_WRITE_REQ);
+
+	return BFA_STATUS_OK;
+}
+
+/*
+ * Read fru vpd image.
+ *
+ * @param[in] fru - fru structure
+ * @param[in] buf - read data buffer
+ * @param[in] len - data buffer length
+ * @param[in] offset - offset relative to starting address
+ * @param[in] cbfn - callback function
+ * @param[in] cbarg - callback argument
+ *
+ * Return status.
+ */
+bfa_status_t
+bfa_fruvpd_read(struct bfa_fru_s *fru, void *buf, u32 len, u32 offset,
+		bfa_cb_fru_t cbfn, void *cbarg)
+{
+	bfa_trc(fru, BFI_FRUVPD_H2I_READ_REQ);
+	bfa_trc(fru, len);
+	bfa_trc(fru, offset);
+
+	if (fru->ioc->asic_gen != BFI_ASIC_GEN_CT2)
+		return BFA_STATUS_FRU_NOT_PRESENT;
+
+	if (fru->ioc->attr->card_type != BFA_MFG_TYPE_CHINOOK)
+		return BFA_STATUS_CMD_NOTSUPP;
+
+	if (!bfa_ioc_is_operational(fru->ioc))
+		return BFA_STATUS_IOC_NON_OP;
+
+	if (fru->op_busy) {
+		bfa_trc(fru, fru->op_busy);
+		return BFA_STATUS_DEVBUSY;
+	}
+
+	fru->op_busy = 1;
+
+	fru->cbfn = cbfn;
+	fru->cbarg = cbarg;
+	fru->residue = len;
+	fru->offset = 0;
+	fru->addr_off = offset;
+	fru->ubuf = buf;
+	bfa_fru_read_send(fru, BFI_FRUVPD_H2I_READ_REQ);
+
+	return BFA_STATUS_OK;
+}
+
+/*
+ * Get maximum size fru vpd image.
+ *
+ * @param[in] fru - fru structure
+ * @param[out] size - maximum size of fru vpd data
+ *
+ * Return status.
+ */
+bfa_status_t
+bfa_fruvpd_get_max_size(struct bfa_fru_s *fru, u32 *max_size)
+{
+	if (fru->ioc->asic_gen != BFI_ASIC_GEN_CT2)
+		return BFA_STATUS_FRU_NOT_PRESENT;
+
+	if (!bfa_ioc_is_operational(fru->ioc))
+		return BFA_STATUS_IOC_NON_OP;
+
+	if (fru->ioc->attr->card_type == BFA_MFG_TYPE_CHINOOK)
+		*max_size = BFA_FRU_CHINOOK_MAX_SIZE;
+	else
+		return BFA_STATUS_CMD_NOTSUPP;
+	return BFA_STATUS_OK;
+}
+/*
+ * tfru write.
+ *
+ * @param[in] fru - fru structure
+ * @param[in] buf - update data buffer
+ * @param[in] len - data buffer length
+ * @param[in] offset - offset relative to starting address
+ * @param[in] cbfn - callback function
+ * @param[in] cbarg - callback argument
+ *
+ * Return status.
+ */
+bfa_status_t
+bfa_tfru_write(struct bfa_fru_s *fru, void *buf, u32 len, u32 offset,
+	       bfa_cb_fru_t cbfn, void *cbarg)
+{
+	bfa_trc(fru, BFI_TFRU_H2I_WRITE_REQ);
+	bfa_trc(fru, len);
+	bfa_trc(fru, offset);
+	bfa_trc(fru, *((u8 *) buf));
+
+	if (fru->ioc->asic_gen != BFI_ASIC_GEN_CT2)
+		return BFA_STATUS_FRU_NOT_PRESENT;
+
+	if (!bfa_ioc_is_operational(fru->ioc))
+		return BFA_STATUS_IOC_NON_OP;
+
+	if (fru->op_busy) {
+		bfa_trc(fru, fru->op_busy);
+		return BFA_STATUS_DEVBUSY;
+	}
+
+	fru->op_busy = 1;
+
+	fru->cbfn = cbfn;
+	fru->cbarg = cbarg;
+	fru->residue = len;
+	fru->offset = 0;
+	fru->addr_off = offset;
+	fru->ubuf = buf;
+
+	bfa_fru_write_send(fru, BFI_TFRU_H2I_WRITE_REQ);
+
+	return BFA_STATUS_OK;
+}
+
+/*
+ * tfru read.
+ *
+ * @param[in] fru - fru structure
+ * @param[in] buf - read data buffer
+ * @param[in] len - data buffer length
+ * @param[in] offset - offset relative to starting address
+ * @param[in] cbfn - callback function
+ * @param[in] cbarg - callback argument
+ *
+ * Return status.
+ */
+bfa_status_t
+bfa_tfru_read(struct bfa_fru_s *fru, void *buf, u32 len, u32 offset,
+	      bfa_cb_fru_t cbfn, void *cbarg)
+{
+	bfa_trc(fru, BFI_TFRU_H2I_READ_REQ);
+	bfa_trc(fru, len);
+	bfa_trc(fru, offset);
+
+	if (fru->ioc->asic_gen != BFI_ASIC_GEN_CT2)
+		return BFA_STATUS_FRU_NOT_PRESENT;
+
+	if (!bfa_ioc_is_operational(fru->ioc))
+		return BFA_STATUS_IOC_NON_OP;
+
+	if (fru->op_busy) {
+		bfa_trc(fru, fru->op_busy);
+		return BFA_STATUS_DEVBUSY;
+	}
+
+	fru->op_busy = 1;
+
+	fru->cbfn = cbfn;
+	fru->cbarg = cbarg;
+	fru->residue = len;
+	fru->offset = 0;
+	fru->addr_off = offset;
+	fru->ubuf = buf;
+	bfa_fru_read_send(fru, BFI_TFRU_H2I_READ_REQ);
+
+	return BFA_STATUS_OK;
+}
+
+/*
+ * Process fru response messages upon receiving interrupts.
+ *
+ * @param[in] fruarg - fru structure
+ * @param[in] msg - message structure
+ */
+void
+bfa_fru_intr(void *fruarg, struct bfi_mbmsg_s *msg)
+{
+	struct bfa_fru_s *fru = fruarg;
+	struct bfi_fru_rsp_s *rsp = (struct bfi_fru_rsp_s *)msg;
+	u32 status;
+
+	bfa_trc(fru, msg->mh.msg_id);
+
+	if (!fru->op_busy) {
+		/*
+		 * receiving response after ioc failure
+		 */
+		bfa_trc(fru, 0x9999);
+		return;
+	}
+
+	switch (msg->mh.msg_id) {
+	case BFI_FRUVPD_I2H_WRITE_RSP:
+	case BFI_TFRU_I2H_WRITE_RSP:
+		status = be32_to_cpu(rsp->status);
+		bfa_trc(fru, status);
+
+		if (status != BFA_STATUS_OK || fru->residue == 0) {
+			fru->status = status;
+			fru->op_busy = 0;
+			if (fru->cbfn)
+				fru->cbfn(fru->cbarg, fru->status);
+		} else {
+			bfa_trc(fru, fru->offset);
+			if (msg->mh.msg_id == BFI_FRUVPD_I2H_WRITE_RSP)
+				bfa_fru_write_send(fru,
+					BFI_FRUVPD_H2I_WRITE_REQ);
+			else
+				bfa_fru_write_send(fru,
+					BFI_TFRU_H2I_WRITE_REQ);
+		}
+		break;
+	case BFI_FRUVPD_I2H_READ_RSP:
+	case BFI_TFRU_I2H_READ_RSP:
+		status = be32_to_cpu(rsp->status);
+		bfa_trc(fru, status);
+
+		if (status != BFA_STATUS_OK) {
+			fru->status = status;
+			fru->op_busy = 0;
+			if (fru->cbfn)
+				fru->cbfn(fru->cbarg, fru->status);
+		} else {
+			u32 len = be32_to_cpu(rsp->length);
+
+			bfa_trc(fru, fru->offset);
+			bfa_trc(fru, len);
+
+			memcpy(fru->ubuf + fru->offset, fru->dbuf_kva, len);
+			fru->residue -= len;
+			fru->offset += len;
+
+			if (fru->residue == 0) {
+				fru->status = status;
+				fru->op_busy = 0;
+				if (fru->cbfn)
+					fru->cbfn(fru->cbarg, fru->status);
+			} else {
+				if (msg->mh.msg_id == BFI_FRUVPD_I2H_READ_RSP)
+					bfa_fru_read_send(fru,
+						BFI_FRUVPD_H2I_READ_REQ);
+				else
+					bfa_fru_read_send(fru,
+						BFI_TFRU_H2I_READ_REQ);
+			}
+		}
+		break;
+	default:
+		WARN_ON(1);
+	}
+}
diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h
index b2856f9..23a90e7 100644
--- a/drivers/scsi/bfa/bfa_ioc.h
+++ b/drivers/scsi/bfa/bfa_ioc.h
@@ -702,6 +702,55 @@
 void bfa_phy_intr(void *phyarg, struct bfi_mbmsg_s *msg);
 
 /*
+ * FRU module specific
+ */
+typedef void (*bfa_cb_fru_t) (void *cbarg, bfa_status_t status);
+
+struct bfa_fru_s {
+	struct bfa_ioc_s *ioc;		/* back pointer to ioc */
+	struct bfa_trc_mod_s *trcmod;	/* trace module */
+	u8		op_busy;	/* operation busy flag */
+	u8		rsv[3];
+	u32		residue;	/* residual length */
+	u32		offset;		/* offset */
+	bfa_status_t	status;		/* status */
+	u8		*dbuf_kva;	/* dma buf virtual address */
+	u64		dbuf_pa;	/* dma buf physical address */
+	struct bfa_reqq_wait_s reqq_wait; /* to wait for room in reqq */
+	bfa_cb_fru_t	cbfn;		/* user callback function */
+	void		*cbarg;		/* user callback arg */
+	u8		*ubuf;		/* user supplied buffer */
+	struct bfa_cb_qe_s	hcb_qe;	/* comp: BFA callback qelem */
+	u32		addr_off;	/* fru address offset */
+	struct bfa_mbox_cmd_s mb;	/* mailbox */
+	struct bfa_ioc_notify_s ioc_notify; /* ioc event notify */
+	struct bfa_mem_dma_s	fru_dma;
+};
+
+#define BFA_FRU(__bfa)	(&(__bfa)->modules.fru)
+#define BFA_MEM_FRU_DMA(__bfa)	(&(BFA_FRU(__bfa)->fru_dma))
+
+bfa_status_t bfa_fruvpd_update(struct bfa_fru_s *fru,
+			void *buf, u32 len, u32 offset,
+			bfa_cb_fru_t cbfn, void *cbarg);
+bfa_status_t bfa_fruvpd_read(struct bfa_fru_s *fru,
+			void *buf, u32 len, u32 offset,
+			bfa_cb_fru_t cbfn, void *cbarg);
+bfa_status_t bfa_fruvpd_get_max_size(struct bfa_fru_s *fru, u32 *max_size);
+bfa_status_t bfa_tfru_write(struct bfa_fru_s *fru,
+			void *buf, u32 len, u32 offset,
+			bfa_cb_fru_t cbfn, void *cbarg);
+bfa_status_t bfa_tfru_read(struct bfa_fru_s *fru,
+			void *buf, u32 len, u32 offset,
+			bfa_cb_fru_t cbfn, void *cbarg);
+u32	bfa_fru_meminfo(bfa_boolean_t mincfg);
+void bfa_fru_attach(struct bfa_fru_s *fru, struct bfa_ioc_s *ioc,
+		void *dev, struct bfa_trc_mod_s *trcmod, bfa_boolean_t mincfg);
+void bfa_fru_memclaim(struct bfa_fru_s *fru,
+		u8 *dm_kva, u64 dm_pa, bfa_boolean_t mincfg);
+void bfa_fru_intr(void *fruarg, struct bfi_mbmsg_s *msg);
+
+/*
  * Driver Config( dconf) specific
  */
 #define BFI_DCONF_SIGNATURE	0xabcdabcd
@@ -716,6 +765,7 @@
 struct bfa_dconf_s {
 	struct bfa_dconf_hdr_s		hdr;
 	struct bfa_lunmask_cfg_s	lun_mask;
+	struct bfa_throttle_cfg_s	throttle_cfg;
 };
 #pragma pack()
 
@@ -738,6 +788,8 @@
 #define bfa_dconf_read_data_valid(__bfa)	\
 	(BFA_DCONF_MOD(__bfa)->read_data_valid)
 #define BFA_DCONF_UPDATE_TOV	5000	/* memtest timeout in msec */
+#define bfa_dconf_get_min_cfg(__bfa)	\
+	(BFA_DCONF_MOD(__bfa)->min_cfg)
 
 void	bfa_dconf_modinit(struct bfa_s *bfa);
 void	bfa_dconf_modexit(struct bfa_s *bfa);
@@ -761,7 +813,8 @@
 #define bfa_ioc_maxfrsize(__ioc)	((__ioc)->attr->maxfrsize)
 #define bfa_ioc_rx_bbcredit(__ioc)	((__ioc)->attr->rx_bbcredit)
 #define bfa_ioc_speed_sup(__ioc)	\
-	BFI_ADAPTER_GETP(SPEED, (__ioc)->attr->adapter_prop)
+	((bfa_ioc_is_cna(__ioc)) ? BFA_PORT_SPEED_10GBPS :	\
+	 BFI_ADAPTER_GETP(SPEED, (__ioc)->attr->adapter_prop))
 #define bfa_ioc_get_nports(__ioc)	\
 	BFI_ADAPTER_GETP(NPORTS, (__ioc)->attr->adapter_prop)
 
@@ -885,12 +938,12 @@
 		enum bfa_mode_s mode, int max_pf, int max_vf,
 		bfa_ablk_cbfn_t cbfn, void *cbarg);
 bfa_status_t bfa_ablk_pf_create(struct bfa_ablk_s *ablk, u16 *pcifn,
-		u8 port, enum bfi_pcifn_class personality, int bw,
-		bfa_ablk_cbfn_t cbfn, void *cbarg);
+		u8 port, enum bfi_pcifn_class personality,
+		u16 bw_min, u16 bw_max, bfa_ablk_cbfn_t cbfn, void *cbarg);
 bfa_status_t bfa_ablk_pf_delete(struct bfa_ablk_s *ablk, int pcifn,
 		bfa_ablk_cbfn_t cbfn, void *cbarg);
-bfa_status_t bfa_ablk_pf_update(struct bfa_ablk_s *ablk, int pcifn, int bw,
-		bfa_ablk_cbfn_t cbfn, void *cbarg);
+bfa_status_t bfa_ablk_pf_update(struct bfa_ablk_s *ablk, int pcifn,
+		u16 bw_min, u16 bw_max, bfa_ablk_cbfn_t cbfn, void *cbarg);
 bfa_status_t bfa_ablk_optrom_en(struct bfa_ablk_s *ablk,
 		bfa_ablk_cbfn_t cbfn, void *cbarg);
 bfa_status_t bfa_ablk_optrom_dis(struct bfa_ablk_s *ablk,
diff --git a/drivers/scsi/bfa/bfa_ioc_ct.c b/drivers/scsi/bfa/bfa_ioc_ct.c
index 2eb0c6a..de4e726 100644
--- a/drivers/scsi/bfa/bfa_ioc_ct.c
+++ b/drivers/scsi/bfa/bfa_ioc_ct.c
@@ -57,13 +57,6 @@
 	u32 usecnt;
 	struct bfi_ioc_image_hdr_s fwhdr;
 
-	/*
-	 * If bios boot (flash based) -- do not increment usage count
-	 */
-	if (bfa_cb_image_get_size(bfa_ioc_asic_gen(ioc)) <
-						BFA_IOC_FWIMG_MINSZ)
-		return BFA_TRUE;
-
 	bfa_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
 	usecnt = readl(ioc->ioc_regs.ioc_usage_reg);
 
@@ -115,13 +108,6 @@
 	u32 usecnt;
 
 	/*
-	 * If bios boot (flash based) -- do not decrement usage count
-	 */
-	if (bfa_cb_image_get_size(bfa_ioc_asic_gen(ioc)) <
-						BFA_IOC_FWIMG_MINSZ)
-		return;
-
-	/*
 	 * decrement usage count
 	 */
 	bfa_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
@@ -400,13 +386,12 @@
 bfa_ioc_ct_ownership_reset(struct bfa_ioc_s *ioc)
 {
 
-	if (bfa_ioc_is_cna(ioc)) {
-		bfa_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
-		writel(0, ioc->ioc_regs.ioc_usage_reg);
-		readl(ioc->ioc_regs.ioc_usage_sem_reg);
-		writel(1, ioc->ioc_regs.ioc_usage_sem_reg);
-	}
+	bfa_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
+	writel(0, ioc->ioc_regs.ioc_usage_reg);
+	readl(ioc->ioc_regs.ioc_usage_sem_reg);
+	writel(1, ioc->ioc_regs.ioc_usage_sem_reg);
 
+	writel(0, ioc->ioc_regs.ioc_fail_sync);
 	/*
 	 * Read the hw sem reg to make sure that it is locked
 	 * before we clear it. If it is not locked, writing 1
@@ -759,25 +744,6 @@
 void
 bfa_ioc_ct2_mac_reset(void __iomem *rb)
 {
-	u32	r32;
-
-	bfa_ioc_ct2_sclk_init(rb);
-	bfa_ioc_ct2_lclk_init(rb);
-
-	/*
-	 * release soft reset on s_clk & l_clk
-	 */
-	r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
-	writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET,
-		(rb + CT2_APP_PLL_SCLK_CTL_REG));
-
-	/*
-	 * release soft reset on s_clk & l_clk
-	 */
-	r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
-	writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
-		(rb + CT2_APP_PLL_LCLK_CTL_REG));
-
 	/* put port0, port1 MAC & AHB in reset */
 	writel((__CSI_MAC_RESET | __CSI_MAC_AHB_RESET),
 		rb + CT2_CSI_MAC_CONTROL_REG(0));
@@ -785,8 +751,21 @@
 		rb + CT2_CSI_MAC_CONTROL_REG(1));
 }
 
+static void
+bfa_ioc_ct2_enable_flash(void __iomem *rb)
+{
+	u32 r32;
+
+	r32 = readl((rb + PSS_GPIO_OUT_REG));
+	writel(r32 & ~1, (rb + PSS_GPIO_OUT_REG));
+	r32 = readl((rb + PSS_GPIO_OE_REG));
+	writel(r32 | 1, (rb + PSS_GPIO_OE_REG));
+}
+
 #define CT2_NFC_MAX_DELAY	1000
-#define CT2_NFC_VER_VALID	0x143
+#define CT2_NFC_PAUSE_MAX_DELAY 4000
+#define CT2_NFC_VER_VALID	0x147
+#define CT2_NFC_STATE_RUNNING   0x20000001
 #define BFA_IOC_PLL_POLL	1000000
 
 static bfa_boolean_t
@@ -802,6 +781,20 @@
 }
 
 static void
+bfa_ioc_ct2_nfc_halt(void __iomem *rb)
+{
+	int	i;
+
+	writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_SET_REG);
+	for (i = 0; i < CT2_NFC_MAX_DELAY; i++) {
+		if (bfa_ioc_ct2_nfc_halted(rb))
+			break;
+		udelay(1000);
+	}
+	WARN_ON(!bfa_ioc_ct2_nfc_halted(rb));
+}
+
+static void
 bfa_ioc_ct2_nfc_resume(void __iomem *rb)
 {
 	u32	r32;
@@ -817,105 +810,142 @@
 	WARN_ON(1);
 }
 
+static void
+bfa_ioc_ct2_clk_reset(void __iomem *rb)
+{
+	u32 r32;
+
+	bfa_ioc_ct2_sclk_init(rb);
+	bfa_ioc_ct2_lclk_init(rb);
+
+	/*
+	 * release soft reset on s_clk & l_clk
+	 */
+	r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+	writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET,
+			(rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+	r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+	writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
+			(rb + CT2_APP_PLL_LCLK_CTL_REG));
+
+}
+
+static void
+bfa_ioc_ct2_nfc_clk_reset(void __iomem *rb)
+{
+	u32 r32, i;
+
+	r32 = readl((rb + PSS_CTL_REG));
+	r32 |= (__PSS_LPU0_RESET | __PSS_LPU1_RESET);
+	writel(r32, (rb + PSS_CTL_REG));
+
+	writel(__RESET_AND_START_SCLK_LCLK_PLLS, rb + CT2_CSI_FW_CTL_SET_REG);
+
+	for (i = 0; i < BFA_IOC_PLL_POLL; i++) {
+		r32 = readl(rb + CT2_NFC_FLASH_STS_REG);
+
+		if ((r32 & __FLASH_PLL_INIT_AND_RESET_IN_PROGRESS))
+			break;
+	}
+	WARN_ON(!(r32 & __FLASH_PLL_INIT_AND_RESET_IN_PROGRESS));
+
+	for (i = 0; i < BFA_IOC_PLL_POLL; i++) {
+		r32 = readl(rb + CT2_NFC_FLASH_STS_REG);
+
+		if (!(r32 & __FLASH_PLL_INIT_AND_RESET_IN_PROGRESS))
+			break;
+	}
+	WARN_ON((r32 & __FLASH_PLL_INIT_AND_RESET_IN_PROGRESS));
+
+	r32 = readl(rb + CT2_CSI_FW_CTL_REG);
+	WARN_ON((r32 & __RESET_AND_START_SCLK_LCLK_PLLS));
+}
+
+static void
+bfa_ioc_ct2_wait_till_nfc_running(void __iomem *rb)
+{
+	u32 r32;
+	int i;
+
+	if (bfa_ioc_ct2_nfc_halted(rb))
+		bfa_ioc_ct2_nfc_resume(rb);
+	for (i = 0; i < CT2_NFC_PAUSE_MAX_DELAY; i++) {
+		r32 = readl(rb + CT2_NFC_STS_REG);
+		if (r32 == CT2_NFC_STATE_RUNNING)
+			return;
+		udelay(1000);
+	}
+
+	r32 = readl(rb + CT2_NFC_STS_REG);
+	WARN_ON(!(r32 == CT2_NFC_STATE_RUNNING));
+}
+
 bfa_status_t
 bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode mode)
 {
-	u32 wgn, r32, nfc_ver, i;
+	u32 wgn, r32, nfc_ver;
 
 	wgn = readl(rb + CT2_WGN_STATUS);
-	nfc_ver = readl(rb + CT2_RSC_GPR15_REG);
 
-	if ((wgn == (__A2T_AHB_LOAD | __WGN_READY)) &&
-	    (nfc_ver >= CT2_NFC_VER_VALID)) {
-		if (bfa_ioc_ct2_nfc_halted(rb))
-			bfa_ioc_ct2_nfc_resume(rb);
-
-		writel(__RESET_AND_START_SCLK_LCLK_PLLS,
-		       rb + CT2_CSI_FW_CTL_SET_REG);
-
-		for (i = 0; i < BFA_IOC_PLL_POLL; i++) {
-			r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
-			if (r32 & __RESET_AND_START_SCLK_LCLK_PLLS)
-				break;
-		}
-
-		WARN_ON(!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS));
-
-		for (i = 0; i < BFA_IOC_PLL_POLL; i++) {
-			r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
-			if (!(r32 & __RESET_AND_START_SCLK_LCLK_PLLS))
-				break;
-		}
-
-		WARN_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS);
-		udelay(1000);
-
-		r32 = readl(rb + CT2_CSI_FW_CTL_REG);
-		WARN_ON(r32 & __RESET_AND_START_SCLK_LCLK_PLLS);
-	} else {
-		writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_SET_REG);
-		for (i = 0; i < CT2_NFC_MAX_DELAY; i++) {
-			r32 = readl(rb + CT2_NFC_CSR_SET_REG);
-			if (r32 & __NFC_CONTROLLER_HALTED)
-				break;
-			udelay(1000);
-		}
+	if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) {
+		/*
+		 * If flash is corrupted, enable flash explicitly
+		 */
+		bfa_ioc_ct2_clk_reset(rb);
+		bfa_ioc_ct2_enable_flash(rb);
 
 		bfa_ioc_ct2_mac_reset(rb);
-		bfa_ioc_ct2_sclk_init(rb);
-		bfa_ioc_ct2_lclk_init(rb);
 
-		/*
-		 * release soft reset on s_clk & l_clk
-		 */
-		r32 = readl(rb + CT2_APP_PLL_SCLK_CTL_REG);
-		writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET,
-		       (rb + CT2_APP_PLL_SCLK_CTL_REG));
+		bfa_ioc_ct2_clk_reset(rb);
+		bfa_ioc_ct2_enable_flash(rb);
 
-		/*
-		 * release soft reset on s_clk & l_clk
-		 */
-		r32 = readl(rb + CT2_APP_PLL_LCLK_CTL_REG);
-		writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
-		      (rb + CT2_APP_PLL_LCLK_CTL_REG));
-	}
+	} else {
+		nfc_ver = readl(rb + CT2_RSC_GPR15_REG);
 
-	/*
-	 * Announce flash device presence, if flash was corrupted.
-	 */
-	if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) {
-		r32 = readl(rb + PSS_GPIO_OUT_REG);
-		writel(r32 & ~1, (rb + PSS_GPIO_OUT_REG));
-		r32 = readl(rb + PSS_GPIO_OE_REG);
-		writel(r32 | 1, (rb + PSS_GPIO_OE_REG));
+		if ((nfc_ver >= CT2_NFC_VER_VALID) &&
+		    (wgn == (__A2T_AHB_LOAD | __WGN_READY))) {
+
+			bfa_ioc_ct2_wait_till_nfc_running(rb);
+
+			bfa_ioc_ct2_nfc_clk_reset(rb);
+		} else {
+			bfa_ioc_ct2_nfc_halt(rb);
+
+			bfa_ioc_ct2_clk_reset(rb);
+			bfa_ioc_ct2_mac_reset(rb);
+			bfa_ioc_ct2_clk_reset(rb);
+
+		}
 	}
 
 	/*
 	 * Mask the interrupts and clear any
-	 * pending interrupts.
+	 * pending interrupts left by BIOS/EFI
 	 */
+
 	writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK));
 	writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK));
 
 	/* For first time initialization, no need to clear interrupts */
 	r32 = readl(rb + HOST_SEM5_REG);
 	if (r32 & 0x1) {
-		r32 = readl(rb + CT2_LPU0_HOSTFN_CMD_STAT);
+		r32 = readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
 		if (r32 == 1) {
-			writel(1, rb + CT2_LPU0_HOSTFN_CMD_STAT);
+			writel(1, (rb + CT2_LPU0_HOSTFN_CMD_STAT));
 			readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
 		}
-		r32 = readl(rb + CT2_LPU1_HOSTFN_CMD_STAT);
+		r32 = readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
 		if (r32 == 1) {
-			writel(1, rb + CT2_LPU1_HOSTFN_CMD_STAT);
-			readl(rb + CT2_LPU1_HOSTFN_CMD_STAT);
+			writel(1, (rb + CT2_LPU1_HOSTFN_CMD_STAT));
+			readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
 		}
 	}
 
 	bfa_ioc_ct2_mem_init(rb);
 
-	writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC0_STATE_REG);
-	writel(BFI_IOC_UNINIT, rb + CT2_BFA_IOC1_STATE_REG);
+	writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC0_STATE_REG));
+	writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC1_STATE_REG));
 
 	return BFA_STATUS_OK;
 }
diff --git a/drivers/scsi/bfa/bfa_modules.h b/drivers/scsi/bfa/bfa_modules.h
index 189fff7..a14c784 100644
--- a/drivers/scsi/bfa/bfa_modules.h
+++ b/drivers/scsi/bfa/bfa_modules.h
@@ -45,6 +45,7 @@
 	struct bfa_diag_s	diag_mod;	/*  diagnostics module	*/
 	struct bfa_phy_s	phy;		/*  phy module		*/
 	struct bfa_dconf_mod_s	dconf_mod;	/*  DCONF common module	*/
+	struct bfa_fru_s	fru;		/*  fru module		*/
 };
 
 /*
diff --git a/drivers/scsi/bfa/bfa_port.c b/drivers/scsi/bfa/bfa_port.c
index 95e4ad8..8ea7697 100644
--- a/drivers/scsi/bfa/bfa_port.c
+++ b/drivers/scsi/bfa/bfa_port.c
@@ -250,6 +250,12 @@
 		return BFA_STATUS_IOC_FAILURE;
 	}
 
+	/* if port is d-port enabled, return error */
+	if (port->dport_enabled) {
+		bfa_trc(port, BFA_STATUS_DPORT_ERR);
+		return BFA_STATUS_DPORT_ERR;
+	}
+
 	if (port->endis_pending) {
 		bfa_trc(port, BFA_STATUS_DEVBUSY);
 		return BFA_STATUS_DEVBUSY;
@@ -300,6 +306,12 @@
 		return BFA_STATUS_IOC_FAILURE;
 	}
 
+	/* if port is d-port enabled, return error */
+	if (port->dport_enabled) {
+		bfa_trc(port, BFA_STATUS_DPORT_ERR);
+		return BFA_STATUS_DPORT_ERR;
+	}
+
 	if (port->endis_pending) {
 		bfa_trc(port, BFA_STATUS_DEVBUSY);
 		return BFA_STATUS_DEVBUSY;
@@ -431,6 +443,10 @@
 			port->endis_cbfn = NULL;
 			port->endis_pending = BFA_FALSE;
 		}
+
+		/* clear D-port mode */
+		if (port->dport_enabled)
+			bfa_port_set_dportenabled(port, BFA_FALSE);
 		break;
 	default:
 		break;
@@ -467,6 +483,7 @@
 	port->stats_cbfn = NULL;
 	port->endis_cbfn = NULL;
 	port->pbc_disabled = BFA_FALSE;
+	port->dport_enabled = BFA_FALSE;
 
 	bfa_ioc_mbox_regisr(port->ioc, BFI_MC_PORT, bfa_port_isr, port);
 	bfa_q_qe_init(&port->ioc_notify);
@@ -483,6 +500,21 @@
 }
 
 /*
+ * bfa_port_set_dportenabled();
+ *
+ * Port module- set pbc disabled flag
+ *
+ * @param[in] port - Pointer to the Port module data structure
+ *
+ * @return void
+ */
+void
+bfa_port_set_dportenabled(struct bfa_port_s *port, bfa_boolean_t enabled)
+{
+	port->dport_enabled = enabled;
+}
+
+/*
  *	CEE module specific definitions
  */
 
diff --git a/drivers/scsi/bfa/bfa_port.h b/drivers/scsi/bfa/bfa_port.h
index 947f8973..2fcab6b 100644
--- a/drivers/scsi/bfa/bfa_port.h
+++ b/drivers/scsi/bfa/bfa_port.h
@@ -45,6 +45,7 @@
 	bfa_status_t			endis_status;
 	struct bfa_ioc_notify_s		ioc_notify;
 	bfa_boolean_t			pbc_disabled;
+	bfa_boolean_t			dport_enabled;
 	struct bfa_mem_dma_s		port_dma;
 };
 
@@ -66,6 +67,8 @@
 u32     bfa_port_meminfo(void);
 void	     bfa_port_mem_claim(struct bfa_port_s *port,
 				 u8 *dma_kva, u64 dma_pa);
+void	bfa_port_set_dportenabled(struct bfa_port_s *port,
+				  bfa_boolean_t enabled);
 
 /*
  * CEE declaration
diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c
index b2538d6..299c1c8 100644
--- a/drivers/scsi/bfa/bfa_svc.c
+++ b/drivers/scsi/bfa/bfa_svc.c
@@ -67,6 +67,9 @@
 	BFA_FCPORT_SM_LINKDOWN	= 7,	/*  firmware linkup down	*/
 	BFA_FCPORT_SM_QRESUME	= 8,	/*  CQ space available	*/
 	BFA_FCPORT_SM_HWFAIL	= 9,	/*  IOC h/w failure		*/
+	BFA_FCPORT_SM_DPORTENABLE = 10, /*  enable dport      */
+	BFA_FCPORT_SM_DPORTDISABLE = 11,/*  disable dport     */
+	BFA_FCPORT_SM_FAA_MISCONFIG = 12,	/* FAA misconfiguratin */
 };
 
 /*
@@ -197,6 +200,10 @@
 					enum bfa_fcport_sm_event event);
 static void     bfa_fcport_sm_iocfail(struct bfa_fcport_s *fcport,
 					enum bfa_fcport_sm_event event);
+static void	bfa_fcport_sm_dport(struct bfa_fcport_s *fcport,
+					enum bfa_fcport_sm_event event);
+static void	bfa_fcport_sm_faa_misconfig(struct bfa_fcport_s *fcport,
+					enum bfa_fcport_sm_event event);
 
 static void     bfa_fcport_ln_sm_dn(struct bfa_fcport_ln_s *ln,
 					enum bfa_fcport_ln_sm_event event);
@@ -226,6 +233,8 @@
 	{BFA_SM(bfa_fcport_sm_stopped), BFA_PORT_ST_STOPPED},
 	{BFA_SM(bfa_fcport_sm_iocdown), BFA_PORT_ST_IOCDOWN},
 	{BFA_SM(bfa_fcport_sm_iocfail), BFA_PORT_ST_IOCDOWN},
+	{BFA_SM(bfa_fcport_sm_dport), BFA_PORT_ST_DPORT},
+	{BFA_SM(bfa_fcport_sm_faa_misconfig), BFA_PORT_ST_FAA_MISCONFIG},
 };
 
 
@@ -1244,6 +1253,12 @@
 		 * Just ignore
 		 */
 		break;
+	case BFA_LPS_SM_SET_N2N_PID:
+		/*
+		 * When topology is set to loop, bfa_lps_set_n2n_pid() sends
+		 * this event. Ignore this event.
+		 */
+		break;
 
 	default:
 		bfa_sm_fault(lps->bfa, event);
@@ -1261,6 +1276,7 @@
 
 	switch (event) {
 	case BFA_LPS_SM_FWRSP:
+	case BFA_LPS_SM_OFFLINE:
 		if (lps->status == BFA_STATUS_OK) {
 			bfa_sm_set_state(lps, bfa_lps_sm_online);
 			if (lps->fdisc)
@@ -1289,7 +1305,6 @@
 		bfa_lps_login_comp(lps);
 		break;
 
-	case BFA_LPS_SM_OFFLINE:
 	case BFA_LPS_SM_DELETE:
 		bfa_sm_set_state(lps, bfa_lps_sm_init);
 		break;
@@ -2169,6 +2184,12 @@
 		bfa_sm_set_state(fcport, bfa_fcport_sm_iocdown);
 		break;
 
+	case BFA_FCPORT_SM_FAA_MISCONFIG:
+		bfa_fcport_reset_linkinfo(fcport);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISCONNECT);
+		bfa_sm_set_state(fcport, bfa_fcport_sm_faa_misconfig);
+		break;
+
 	default:
 		bfa_sm_fault(fcport->bfa, event);
 	}
@@ -2225,6 +2246,12 @@
 		bfa_sm_set_state(fcport, bfa_fcport_sm_iocdown);
 		break;
 
+	case BFA_FCPORT_SM_FAA_MISCONFIG:
+		bfa_fcport_reset_linkinfo(fcport);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISCONNECT);
+		bfa_sm_set_state(fcport, bfa_fcport_sm_faa_misconfig);
+		break;
+
 	default:
 		bfa_sm_fault(fcport->bfa, event);
 	}
@@ -2250,11 +2277,11 @@
 		if (!bfa_ioc_get_fcmode(&fcport->bfa->ioc)) {
 
 			bfa_trc(fcport->bfa,
-				pevent->link_state.vc_fcf.fcf.fipenabled);
+				pevent->link_state.attr.vc_fcf.fcf.fipenabled);
 			bfa_trc(fcport->bfa,
-				pevent->link_state.vc_fcf.fcf.fipfailed);
+				pevent->link_state.attr.vc_fcf.fcf.fipfailed);
 
-			if (pevent->link_state.vc_fcf.fcf.fipfailed)
+			if (pevent->link_state.attr.vc_fcf.fcf.fipfailed)
 				bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 					BFA_PL_EID_FIP_FCF_DISC, 0,
 					"FIP FCF Discovery Failed");
@@ -2311,6 +2338,12 @@
 		bfa_sm_set_state(fcport, bfa_fcport_sm_iocdown);
 		break;
 
+	case BFA_FCPORT_SM_FAA_MISCONFIG:
+		bfa_fcport_reset_linkinfo(fcport);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISCONNECT);
+		bfa_sm_set_state(fcport, bfa_fcport_sm_faa_misconfig);
+		break;
+
 	default:
 		bfa_sm_fault(fcport->bfa, event);
 	}
@@ -2404,6 +2437,12 @@
 		}
 		break;
 
+	case BFA_FCPORT_SM_FAA_MISCONFIG:
+		bfa_fcport_reset_linkinfo(fcport);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISCONNECT);
+		bfa_sm_set_state(fcport, bfa_fcport_sm_faa_misconfig);
+		break;
+
 	default:
 		bfa_sm_fault(fcport->bfa, event);
 	}
@@ -2449,6 +2488,12 @@
 		bfa_reqq_wcancel(&fcport->reqq_wait);
 		break;
 
+	case BFA_FCPORT_SM_FAA_MISCONFIG:
+		bfa_fcport_reset_linkinfo(fcport);
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISCONNECT);
+		bfa_sm_set_state(fcport, bfa_fcport_sm_faa_misconfig);
+		break;
+
 	default:
 		bfa_sm_fault(fcport->bfa, event);
 	}
@@ -2600,6 +2645,10 @@
 		bfa_sm_set_state(fcport, bfa_fcport_sm_iocfail);
 		break;
 
+	case BFA_FCPORT_SM_DPORTENABLE:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_dport);
+		break;
+
 	default:
 		bfa_sm_fault(fcport->bfa, event);
 	}
@@ -2680,6 +2729,81 @@
 	}
 }
 
+static void
+bfa_fcport_sm_dport(struct bfa_fcport_s *fcport, enum bfa_fcport_sm_event event)
+{
+	bfa_trc(fcport->bfa, event);
+
+	switch (event) {
+	case BFA_FCPORT_SM_DPORTENABLE:
+	case BFA_FCPORT_SM_DISABLE:
+	case BFA_FCPORT_SM_ENABLE:
+	case BFA_FCPORT_SM_START:
+		/*
+		 * Ignore event for a port that is dport
+		 */
+		break;
+
+	case BFA_FCPORT_SM_STOP:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_stopped);
+		break;
+
+	case BFA_FCPORT_SM_HWFAIL:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_iocfail);
+		break;
+
+	case BFA_FCPORT_SM_DPORTDISABLE:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_disabled);
+		break;
+
+	default:
+		bfa_sm_fault(fcport->bfa, event);
+	}
+}
+
+static void
+bfa_fcport_sm_faa_misconfig(struct bfa_fcport_s *fcport,
+			    enum bfa_fcport_sm_event event)
+{
+	bfa_trc(fcport->bfa, event);
+
+	switch (event) {
+	case BFA_FCPORT_SM_DPORTENABLE:
+	case BFA_FCPORT_SM_ENABLE:
+	case BFA_FCPORT_SM_START:
+		/*
+		 * Ignore event for a port as there is FAA misconfig
+		 */
+		break;
+
+	case BFA_FCPORT_SM_DISABLE:
+		if (bfa_fcport_send_disable(fcport))
+			bfa_sm_set_state(fcport, bfa_fcport_sm_disabling);
+		else
+			bfa_sm_set_state(fcport, bfa_fcport_sm_disabling_qwait);
+
+		bfa_fcport_reset_linkinfo(fcport);
+		bfa_fcport_scn(fcport, BFA_PORT_LINKDOWN, BFA_FALSE);
+		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
+			     BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
+		bfa_fcport_aen_post(fcport, BFA_PORT_AEN_DISABLE);
+		break;
+
+	case BFA_FCPORT_SM_STOP:
+		bfa_sm_set_state(fcport, bfa_fcport_sm_stopped);
+		break;
+
+	case BFA_FCPORT_SM_HWFAIL:
+		bfa_fcport_reset_linkinfo(fcport);
+		bfa_fcport_scn(fcport, BFA_PORT_LINKDOWN, BFA_FALSE);
+		bfa_sm_set_state(fcport, bfa_fcport_sm_iocdown);
+		break;
+
+	default:
+		bfa_sm_fault(fcport->bfa, event);
+	}
+}
+
 /*
  * Link state is down
  */
@@ -2943,6 +3067,7 @@
 	 */
 	do_gettimeofday(&tv);
 	fcport->stats_reset_time = tv.tv_sec;
+	fcport->stats_dma_ready = BFA_FALSE;
 
 	/*
 	 * initialize and set default configuration
@@ -2953,6 +3078,9 @@
 	port_cfg->maxfrsize = 0;
 
 	port_cfg->trl_def_speed = BFA_PORT_SPEED_1GBPS;
+	port_cfg->qos_bw.high = BFA_QOS_BW_HIGH;
+	port_cfg->qos_bw.med = BFA_QOS_BW_MED;
+	port_cfg->qos_bw.low = BFA_QOS_BW_LOW;
 
 	INIT_LIST_HEAD(&fcport->stats_pending_q);
 	INIT_LIST_HEAD(&fcport->statsclr_pending_q);
@@ -2996,6 +3124,21 @@
 	bfa_trunk_iocdisable(bfa);
 }
 
+/*
+ * Update loop info in fcport for SCN online
+ */
+static void
+bfa_fcport_update_loop_info(struct bfa_fcport_s *fcport,
+			struct bfa_fcport_loop_info_s *loop_info)
+{
+	fcport->myalpa = loop_info->myalpa;
+	fcport->alpabm_valid =
+			loop_info->alpabm_val;
+	memcpy(fcport->alpabm.alpa_bm,
+			loop_info->alpabm.alpa_bm,
+			sizeof(struct fc_alpabm_s));
+}
+
 static void
 bfa_fcport_update_linkinfo(struct bfa_fcport_s *fcport)
 {
@@ -3005,12 +3148,15 @@
 	fcport->speed = pevent->link_state.speed;
 	fcport->topology = pevent->link_state.topology;
 
-	if (fcport->topology == BFA_PORT_TOPOLOGY_LOOP)
-		fcport->myalpa = 0;
+	if (fcport->topology == BFA_PORT_TOPOLOGY_LOOP) {
+		bfa_fcport_update_loop_info(fcport,
+				&pevent->link_state.attr.loop_info);
+		return;
+	}
 
 	/* QoS Details */
 	fcport->qos_attr = pevent->link_state.qos_attr;
-	fcport->qos_vc_attr = pevent->link_state.vc_fcf.qos_vc_attr;
+	fcport->qos_vc_attr = pevent->link_state.attr.vc_fcf.qos_vc_attr;
 
 	/*
 	 * update trunk state if applicable
@@ -3019,7 +3165,8 @@
 		trunk->attr.state = BFA_TRUNK_DISABLED;
 
 	/* update FCoE specific */
-	fcport->fcoe_vlan = be16_to_cpu(pevent->link_state.vc_fcf.fcf.vlan);
+	fcport->fcoe_vlan =
+		be16_to_cpu(pevent->link_state.attr.vc_fcf.fcf.vlan);
 
 	bfa_trc(fcport->bfa, fcport->speed);
 	bfa_trc(fcport->bfa, fcport->topology);
@@ -3453,6 +3600,7 @@
 	case BFI_FCPORT_I2H_ENABLE_RSP:
 		if (fcport->msgtag == i2hmsg.penable_rsp->msgtag) {
 
+			fcport->stats_dma_ready = BFA_TRUE;
 			if (fcport->use_flash_cfg) {
 				fcport->cfg = i2hmsg.penable_rsp->port_cfg;
 				fcport->cfg.maxfrsize =
@@ -3468,6 +3616,8 @@
 				else
 					fcport->trunk.attr.state =
 						BFA_TRUNK_DISABLED;
+				fcport->qos_attr.qos_bw =
+					i2hmsg.penable_rsp->port_cfg.qos_bw;
 				fcport->use_flash_cfg = BFA_FALSE;
 			}
 
@@ -3476,6 +3626,9 @@
 			else
 				fcport->qos_attr.state = BFA_QOS_DISABLED;
 
+			fcport->qos_attr.qos_bw_op =
+					i2hmsg.penable_rsp->port_cfg.qos_bw;
+
 			bfa_sm_send_event(fcport, BFA_FCPORT_SM_FWRSP);
 		}
 		break;
@@ -3488,8 +3641,17 @@
 	case BFI_FCPORT_I2H_EVENT:
 		if (i2hmsg.event->link_state.linkstate == BFA_PORT_LINKUP)
 			bfa_sm_send_event(fcport, BFA_FCPORT_SM_LINKUP);
-		else
-			bfa_sm_send_event(fcport, BFA_FCPORT_SM_LINKDOWN);
+		else {
+			if (i2hmsg.event->link_state.linkstate_rsn ==
+			    BFA_PORT_LINKSTATE_RSN_FAA_MISCONFIG)
+				bfa_sm_send_event(fcport,
+						  BFA_FCPORT_SM_FAA_MISCONFIG);
+			else
+				bfa_sm_send_event(fcport,
+						  BFA_FCPORT_SM_LINKDOWN);
+		}
+		fcport->qos_attr.qos_bw_op =
+				i2hmsg.event->link_state.qos_attr.qos_bw_op;
 		break;
 
 	case BFI_FCPORT_I2H_TRUNK_SCN:
@@ -3609,6 +3771,9 @@
 
 	if (fcport->cfg.trunked == BFA_TRUE)
 		return BFA_STATUS_TRUNK_ENABLED;
+	if ((fcport->cfg.topology == BFA_PORT_TOPOLOGY_LOOP) &&
+			(speed == BFA_PORT_SPEED_16GBPS))
+		return BFA_STATUS_UNSUPP_SPEED;
 	if ((speed != BFA_PORT_SPEED_AUTO) && (speed > fcport->speed_sup)) {
 		bfa_trc(bfa, fcport->speed_sup);
 		return BFA_STATUS_UNSUPP_SPEED;
@@ -3663,7 +3828,26 @@
 
 	switch (topology) {
 	case BFA_PORT_TOPOLOGY_P2P:
+		break;
+
 	case BFA_PORT_TOPOLOGY_LOOP:
+		if ((bfa_fcport_is_qos_enabled(bfa) != BFA_FALSE) ||
+			(fcport->qos_attr.state != BFA_QOS_DISABLED))
+			return BFA_STATUS_ERROR_QOS_ENABLED;
+		if (fcport->cfg.ratelimit != BFA_FALSE)
+			return BFA_STATUS_ERROR_TRL_ENABLED;
+		if ((bfa_fcport_is_trunk_enabled(bfa) != BFA_FALSE) ||
+			(fcport->trunk.attr.state != BFA_TRUNK_DISABLED))
+			return BFA_STATUS_ERROR_TRUNK_ENABLED;
+		if ((bfa_fcport_get_speed(bfa) == BFA_PORT_SPEED_16GBPS) ||
+			(fcport->cfg.speed == BFA_PORT_SPEED_16GBPS))
+			return BFA_STATUS_UNSUPP_SPEED;
+		if (bfa_mfg_is_mezz(bfa->ioc.attr->card_type))
+			return BFA_STATUS_LOOP_UNSUPP_MEZZ;
+		if (bfa_fcport_is_dport(bfa) != BFA_FALSE)
+			return BFA_STATUS_DPORT_ERR;
+		break;
+
 	case BFA_PORT_TOPOLOGY_AUTO:
 		break;
 
@@ -3686,6 +3870,17 @@
 	return fcport->topology;
 }
 
+/**
+ * Get config topology.
+ */
+enum bfa_port_topology
+bfa_fcport_get_cfg_topology(struct bfa_s *bfa)
+{
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
+
+	return fcport->cfg.topology;
+}
+
 bfa_status_t
 bfa_fcport_cfg_hardalpa(struct bfa_s *bfa, u8 alpa)
 {
@@ -3761,9 +3956,11 @@
 u8
 bfa_fcport_get_rx_bbcredit(struct bfa_s *bfa)
 {
-	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
+	if (bfa_fcport_get_topology(bfa) != BFA_PORT_TOPOLOGY_LOOP)
+		return (BFA_FCPORT_MOD(bfa))->cfg.rx_bbcredit;
 
-	return fcport->cfg.rx_bbcredit;
+	else
+		return 0;
 }
 
 void
@@ -3850,8 +4047,9 @@
 {
 	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
-	if (bfa_ioc_is_disabled(&bfa->ioc))
-		return BFA_STATUS_IOC_DISABLED;
+	if (!bfa_iocfc_is_operational(bfa) ||
+	    !fcport->stats_dma_ready)
+		return BFA_STATUS_IOC_NON_OP;
 
 	if (!list_empty(&fcport->statsclr_pending_q))
 		return BFA_STATUS_DEVBUSY;
@@ -3876,6 +4074,10 @@
 {
 	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 
+	if (!bfa_iocfc_is_operational(bfa) ||
+	    !fcport->stats_dma_ready)
+		return BFA_STATUS_IOC_NON_OP;
+
 	if (!list_empty(&fcport->stats_pending_q))
 		return BFA_STATUS_DEVBUSY;
 
@@ -3905,6 +4107,40 @@
 }
 
 bfa_boolean_t
+bfa_fcport_is_dport(struct bfa_s *bfa)
+{
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
+
+	return (bfa_sm_to_state(hal_port_sm_table, fcport->sm) ==
+		BFA_PORT_ST_DPORT);
+}
+
+bfa_status_t
+bfa_fcport_set_qos_bw(struct bfa_s *bfa, struct bfa_qos_bw_s *qos_bw)
+{
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
+	enum bfa_ioc_type_e ioc_type = bfa_get_type(bfa);
+
+	bfa_trc(bfa, ioc_type);
+
+	if ((qos_bw->high == 0) || (qos_bw->med == 0) || (qos_bw->low == 0))
+		return BFA_STATUS_QOS_BW_INVALID;
+
+	if ((qos_bw->high + qos_bw->med + qos_bw->low) != 100)
+		return BFA_STATUS_QOS_BW_INVALID;
+
+	if ((qos_bw->med > qos_bw->high) || (qos_bw->low > qos_bw->med) ||
+	    (qos_bw->low > qos_bw->high))
+		return BFA_STATUS_QOS_BW_INVALID;
+
+	if ((ioc_type == BFA_IOC_TYPE_FC) &&
+	    (fcport->cfg.topology != BFA_PORT_TOPOLOGY_LOOP))
+		fcport->cfg.qos_bw = *qos_bw;
+
+	return BFA_STATUS_OK;
+}
+
+bfa_boolean_t
 bfa_fcport_is_ratelim(struct bfa_s *bfa)
 {
 	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
@@ -3981,6 +4217,26 @@
 	return fcport->cfg.trunked;
 }
 
+void
+bfa_fcport_dportenable(struct bfa_s *bfa)
+{
+	/*
+	 * Assume caller check for port is in disable state
+	 */
+	bfa_sm_send_event(BFA_FCPORT_MOD(bfa), BFA_FCPORT_SM_DPORTENABLE);
+	bfa_port_set_dportenabled(&bfa->modules.port, BFA_TRUE);
+}
+
+void
+bfa_fcport_dportdisable(struct bfa_s *bfa)
+{
+	/*
+	 * Assume caller check for port is in disable state
+	 */
+	bfa_sm_send_event(BFA_FCPORT_MOD(bfa), BFA_FCPORT_SM_DPORTDISABLE);
+	bfa_port_set_dportenabled(&bfa->modules.port, BFA_FALSE);
+}
+
 /*
  * Rport State machine functions
  */
@@ -4707,6 +4963,21 @@
 		bfa_sm_send_event(rp, BFA_RPORT_SM_QOS_SCN);
 		break;
 
+	case BFI_RPORT_I2H_LIP_SCN_ONLINE:
+		bfa_fcport_update_loop_info(BFA_FCPORT_MOD(bfa),
+				&msg.lip_scn->loop_info);
+		bfa_cb_rport_scn_online(bfa);
+		break;
+
+	case BFI_RPORT_I2H_LIP_SCN_OFFLINE:
+		bfa_cb_rport_scn_offline(bfa);
+		break;
+
+	case BFI_RPORT_I2H_NO_DEV:
+		rp = BFA_RPORT_FROM_TAG(bfa, msg.lip_scn->bfa_handle);
+		bfa_cb_rport_scn_no_dev(rp->rport_drv);
+		break;
+
 	default:
 		bfa_trc(bfa, m->mhdr.msg_id);
 		WARN_ON(1);
@@ -5348,6 +5619,37 @@
 }
 
 /*
+ *	Dport forward declaration
+ */
+
+/*
+ * BFA DPORT state machine events
+ */
+enum bfa_dport_sm_event {
+	BFA_DPORT_SM_ENABLE	= 1,	/* dport enable event         */
+	BFA_DPORT_SM_DISABLE    = 2,    /* dport disable event        */
+	BFA_DPORT_SM_FWRSP      = 3,    /* fw enable/disable rsp      */
+	BFA_DPORT_SM_QRESUME    = 4,    /* CQ space available         */
+	BFA_DPORT_SM_HWFAIL     = 5,    /* IOC h/w failure            */
+};
+
+static void bfa_dport_sm_disabled(struct bfa_dport_s *dport,
+				  enum bfa_dport_sm_event event);
+static void bfa_dport_sm_enabling_qwait(struct bfa_dport_s *dport,
+				  enum bfa_dport_sm_event event);
+static void bfa_dport_sm_enabling(struct bfa_dport_s *dport,
+				  enum bfa_dport_sm_event event);
+static void bfa_dport_sm_enabled(struct bfa_dport_s *dport,
+				 enum bfa_dport_sm_event event);
+static void bfa_dport_sm_disabling_qwait(struct bfa_dport_s *dport,
+				 enum bfa_dport_sm_event event);
+static void bfa_dport_sm_disabling(struct bfa_dport_s *dport,
+				   enum bfa_dport_sm_event event);
+static void bfa_dport_qresume(void *cbarg);
+static void bfa_dport_req_comp(struct bfa_dport_s *dport,
+			       bfi_diag_dport_rsp_t *msg);
+
+/*
  *	BFA fcdiag module
  */
 #define BFA_DIAG_QTEST_TOV	1000    /* msec */
@@ -5377,15 +5679,24 @@
 		struct bfa_pcidev_s *pcidev)
 {
 	struct bfa_fcdiag_s *fcdiag = BFA_FCDIAG_MOD(bfa);
+	struct bfa_dport_s  *dport = &fcdiag->dport;
+
 	fcdiag->bfa             = bfa;
 	fcdiag->trcmod  = bfa->trcmod;
 	/* The common DIAG attach bfa_diag_attach() will do all memory claim */
+	dport->bfa = bfa;
+	bfa_sm_set_state(dport, bfa_dport_sm_disabled);
+	bfa_reqq_winit(&dport->reqq_wait, bfa_dport_qresume, dport);
+	dport->cbfn = NULL;
+	dport->cbarg = NULL;
 }
 
 static void
 bfa_fcdiag_iocdisable(struct bfa_s *bfa)
 {
 	struct bfa_fcdiag_s *fcdiag = BFA_FCDIAG_MOD(bfa);
+	struct bfa_dport_s *dport = &fcdiag->dport;
+
 	bfa_trc(fcdiag, fcdiag->lb.lock);
 	if (fcdiag->lb.lock) {
 		fcdiag->lb.status = BFA_STATUS_IOC_FAILURE;
@@ -5393,6 +5704,8 @@
 		fcdiag->lb.lock = 0;
 		bfa_fcdiag_set_busy_status(fcdiag);
 	}
+
+	bfa_sm_send_event(dport, BFA_DPORT_SM_HWFAIL);
 }
 
 static void
@@ -5577,6 +5890,9 @@
 	case BFI_DIAG_I2H_QTEST:
 		bfa_fcdiag_queuetest_comp(fcdiag, (bfi_diag_qtest_rsp_t *)msg);
 		break;
+	case BFI_DIAG_I2H_DPORT:
+		bfa_dport_req_comp(&fcdiag->dport, (bfi_diag_dport_rsp_t *)msg);
+		break;
 	default:
 		bfa_trc(fcdiag, msg->mhdr.msg_id);
 		WARN_ON(1);
@@ -5646,12 +5962,18 @@
 		}
 	}
 
+	/*
+	 * For CT2, 1G is not supported
+	 */
+	if ((speed == BFA_PORT_SPEED_1GBPS) &&
+	    (bfa_asic_id_ct2(bfa->ioc.pcidev.device_id))) {
+		bfa_trc(fcdiag, speed);
+		return BFA_STATUS_UNSUPP_SPEED;
+	}
+
 	/* For Mezz card, port speed entered needs to be checked */
 	if (bfa_mfg_is_mezz(bfa->ioc.attr->card_type)) {
 		if (bfa_ioc_get_type(&bfa->ioc) == BFA_IOC_TYPE_FC) {
-			if ((speed == BFA_PORT_SPEED_1GBPS) &&
-			    (bfa_asic_id_ct2(bfa->ioc.pcidev.device_id)))
-				return BFA_STATUS_UNSUPP_SPEED;
 			if (!(speed == BFA_PORT_SPEED_1GBPS ||
 			      speed == BFA_PORT_SPEED_2GBPS ||
 			      speed == BFA_PORT_SPEED_4GBPS ||
@@ -5764,3 +6086,379 @@
 	struct bfa_fcdiag_s *fcdiag = BFA_FCDIAG_MOD(bfa);
 	return fcdiag->lb.lock ?  BFA_STATUS_DIAG_BUSY : BFA_STATUS_OK;
 }
+
+/*
+ *	D-port
+ */
+static bfa_boolean_t bfa_dport_send_req(struct bfa_dport_s *dport,
+					enum bfi_dport_req req);
+static void
+bfa_cb_fcdiag_dport(struct bfa_dport_s *dport, bfa_status_t bfa_status)
+{
+	if (dport->cbfn != NULL) {
+		dport->cbfn(dport->cbarg, bfa_status);
+		dport->cbfn = NULL;
+		dport->cbarg = NULL;
+	}
+}
+
+static void
+bfa_dport_sm_disabled(struct bfa_dport_s *dport, enum bfa_dport_sm_event event)
+{
+	bfa_trc(dport->bfa, event);
+
+	switch (event) {
+	case BFA_DPORT_SM_ENABLE:
+		bfa_fcport_dportenable(dport->bfa);
+		if (bfa_dport_send_req(dport, BFI_DPORT_ENABLE))
+			bfa_sm_set_state(dport, bfa_dport_sm_enabling);
+		else
+			bfa_sm_set_state(dport, bfa_dport_sm_enabling_qwait);
+		break;
+
+	case BFA_DPORT_SM_DISABLE:
+		/* Already disabled */
+		break;
+
+	case BFA_DPORT_SM_HWFAIL:
+		/* ignore */
+		break;
+
+	default:
+		bfa_sm_fault(dport->bfa, event);
+	}
+}
+
+static void
+bfa_dport_sm_enabling_qwait(struct bfa_dport_s *dport,
+			    enum bfa_dport_sm_event event)
+{
+	bfa_trc(dport->bfa, event);
+
+	switch (event) {
+	case BFA_DPORT_SM_QRESUME:
+		bfa_sm_set_state(dport, bfa_dport_sm_enabling);
+		bfa_dport_send_req(dport, BFI_DPORT_ENABLE);
+		break;
+
+	case BFA_DPORT_SM_HWFAIL:
+		bfa_reqq_wcancel(&dport->reqq_wait);
+		bfa_sm_set_state(dport, bfa_dport_sm_disabled);
+		bfa_cb_fcdiag_dport(dport, BFA_STATUS_FAILED);
+		break;
+
+	default:
+		bfa_sm_fault(dport->bfa, event);
+	}
+}
+
+static void
+bfa_dport_sm_enabling(struct bfa_dport_s *dport, enum bfa_dport_sm_event event)
+{
+	bfa_trc(dport->bfa, event);
+
+	switch (event) {
+	case BFA_DPORT_SM_FWRSP:
+		bfa_sm_set_state(dport, bfa_dport_sm_enabled);
+		break;
+
+	case BFA_DPORT_SM_HWFAIL:
+		bfa_sm_set_state(dport, bfa_dport_sm_disabled);
+		bfa_cb_fcdiag_dport(dport, BFA_STATUS_FAILED);
+		break;
+
+	default:
+		bfa_sm_fault(dport->bfa, event);
+	}
+}
+
+static void
+bfa_dport_sm_enabled(struct bfa_dport_s *dport, enum bfa_dport_sm_event event)
+{
+	bfa_trc(dport->bfa, event);
+
+	switch (event) {
+	case BFA_DPORT_SM_ENABLE:
+		/* Already enabled */
+		break;
+
+	case BFA_DPORT_SM_DISABLE:
+		bfa_fcport_dportdisable(dport->bfa);
+		if (bfa_dport_send_req(dport, BFI_DPORT_DISABLE))
+			bfa_sm_set_state(dport, bfa_dport_sm_disabling);
+		else
+			bfa_sm_set_state(dport, bfa_dport_sm_disabling_qwait);
+		break;
+
+	case BFA_DPORT_SM_HWFAIL:
+		bfa_sm_set_state(dport, bfa_dport_sm_disabled);
+		break;
+
+	default:
+		bfa_sm_fault(dport->bfa, event);
+	}
+}
+
+static void
+bfa_dport_sm_disabling_qwait(struct bfa_dport_s *dport,
+			     enum bfa_dport_sm_event event)
+{
+	bfa_trc(dport->bfa, event);
+
+	switch (event) {
+	case BFA_DPORT_SM_QRESUME:
+		bfa_sm_set_state(dport, bfa_dport_sm_disabling);
+		bfa_dport_send_req(dport, BFI_DPORT_DISABLE);
+		break;
+
+	case BFA_DPORT_SM_HWFAIL:
+		bfa_sm_set_state(dport, bfa_dport_sm_disabled);
+		bfa_reqq_wcancel(&dport->reqq_wait);
+		bfa_cb_fcdiag_dport(dport, BFA_STATUS_OK);
+		break;
+
+	default:
+		bfa_sm_fault(dport->bfa, event);
+	}
+}
+
+static void
+bfa_dport_sm_disabling(struct bfa_dport_s *dport, enum bfa_dport_sm_event event)
+{
+	bfa_trc(dport->bfa, event);
+
+	switch (event) {
+	case BFA_DPORT_SM_FWRSP:
+		bfa_sm_set_state(dport, bfa_dport_sm_disabled);
+		break;
+
+	case BFA_DPORT_SM_HWFAIL:
+		bfa_sm_set_state(dport, bfa_dport_sm_disabled);
+		bfa_cb_fcdiag_dport(dport, BFA_STATUS_OK);
+		break;
+
+	default:
+		bfa_sm_fault(dport->bfa, event);
+	}
+}
+
+
+static bfa_boolean_t
+bfa_dport_send_req(struct bfa_dport_s *dport, enum bfi_dport_req req)
+{
+	struct bfi_diag_dport_req_s *m;
+
+	/*
+	 * Increment message tag before queue check, so that responses to old
+	 * requests are discarded.
+	 */
+	dport->msgtag++;
+
+	/*
+	 * check for room in queue to send request now
+	 */
+	m = bfa_reqq_next(dport->bfa, BFA_REQQ_DIAG);
+	if (!m) {
+		bfa_reqq_wait(dport->bfa, BFA_REQQ_PORT, &dport->reqq_wait);
+		return BFA_FALSE;
+	}
+
+	bfi_h2i_set(m->mh, BFI_MC_DIAG, BFI_DIAG_H2I_DPORT,
+		    bfa_fn_lpu(dport->bfa));
+	m->req  = req;
+	m->msgtag = dport->msgtag;
+
+	/*
+	 * queue I/O message to firmware
+	 */
+	bfa_reqq_produce(dport->bfa, BFA_REQQ_DIAG, m->mh);
+
+	return BFA_TRUE;
+}
+
+static void
+bfa_dport_qresume(void *cbarg)
+{
+	struct bfa_dport_s *dport = cbarg;
+
+	bfa_sm_send_event(dport, BFA_DPORT_SM_QRESUME);
+}
+
+static void
+bfa_dport_req_comp(struct bfa_dport_s *dport, bfi_diag_dport_rsp_t *msg)
+{
+	bfa_sm_send_event(dport, BFA_DPORT_SM_FWRSP);
+	bfa_cb_fcdiag_dport(dport, msg->status);
+}
+
+/*
+ * Dport enable
+ *
+ * @param[in] *bfa            - bfa data struct
+ */
+bfa_status_t
+bfa_dport_enable(struct bfa_s *bfa, bfa_cb_diag_t cbfn, void *cbarg)
+{
+	struct bfa_fcdiag_s *fcdiag = BFA_FCDIAG_MOD(bfa);
+	struct bfa_dport_s  *dport = &fcdiag->dport;
+
+	/*
+	 * Dport is not support in MEZZ card
+	 */
+	if (bfa_mfg_is_mezz(dport->bfa->ioc.attr->card_type)) {
+		bfa_trc(dport->bfa, BFA_STATUS_PBC);
+		return BFA_STATUS_CMD_NOTSUPP_MEZZ;
+	}
+
+	/*
+	 * Check to see if IOC is down
+	*/
+	if (!bfa_iocfc_is_operational(bfa))
+		return BFA_STATUS_IOC_NON_OP;
+
+	/* if port is PBC disabled, return error */
+	if (bfa_fcport_is_pbcdisabled(bfa)) {
+		bfa_trc(dport->bfa, BFA_STATUS_PBC);
+		return BFA_STATUS_PBC;
+	}
+
+	/*
+	 * Check if port mode is FC port
+	 */
+	if (bfa_ioc_get_type(&bfa->ioc) != BFA_IOC_TYPE_FC) {
+		bfa_trc(dport->bfa, bfa_ioc_get_type(&bfa->ioc));
+		return BFA_STATUS_CMD_NOTSUPP_CNA;
+	}
+
+	/*
+	 * Check if port is in LOOP mode
+	 */
+	if ((bfa_fcport_get_cfg_topology(bfa) == BFA_PORT_TOPOLOGY_LOOP) ||
+	    (bfa_fcport_get_topology(bfa) == BFA_PORT_TOPOLOGY_LOOP)) {
+		bfa_trc(dport->bfa, 0);
+		return BFA_STATUS_TOPOLOGY_LOOP;
+	}
+
+	/*
+	 * Check if port is TRUNK mode
+	 */
+	if (bfa_fcport_is_trunk_enabled(bfa)) {
+		bfa_trc(dport->bfa, 0);
+		return BFA_STATUS_ERROR_TRUNK_ENABLED;
+	}
+
+	/*
+	 * Check to see if port is disable or in dport state
+	 */
+	if ((bfa_fcport_is_disabled(bfa) == BFA_FALSE) &&
+	    (bfa_fcport_is_dport(bfa) == BFA_FALSE)) {
+		bfa_trc(dport->bfa, 0);
+		return BFA_STATUS_PORT_NOT_DISABLED;
+	}
+
+	/*
+	 * Check if dport is busy
+	 */
+	if (bfa_sm_cmp_state(dport, bfa_dport_sm_enabling) ||
+	    bfa_sm_cmp_state(dport, bfa_dport_sm_enabling_qwait) ||
+	    bfa_sm_cmp_state(dport, bfa_dport_sm_disabling) ||
+	    bfa_sm_cmp_state(dport, bfa_dport_sm_disabling_qwait)) {
+		return BFA_STATUS_DEVBUSY;
+	}
+
+	/*
+	 * Check if dport is already enabled
+	 */
+	if (bfa_sm_cmp_state(dport, bfa_dport_sm_enabled)) {
+		bfa_trc(dport->bfa, 0);
+		return BFA_STATUS_DPORT_ENABLED;
+	}
+
+	dport->cbfn = cbfn;
+	dport->cbarg = cbarg;
+
+	bfa_sm_send_event(dport, BFA_DPORT_SM_ENABLE);
+	return BFA_STATUS_OK;
+}
+
+/*
+ *	Dport disable
+ *
+ *	@param[in] *bfa            - bfa data struct
+ */
+bfa_status_t
+bfa_dport_disable(struct bfa_s *bfa, bfa_cb_diag_t cbfn, void *cbarg)
+{
+	struct bfa_fcdiag_s *fcdiag = BFA_FCDIAG_MOD(bfa);
+	struct bfa_dport_s *dport = &fcdiag->dport;
+
+	if (bfa_ioc_is_disabled(&bfa->ioc))
+		return BFA_STATUS_IOC_DISABLED;
+
+	/* if port is PBC disabled, return error */
+	if (bfa_fcport_is_pbcdisabled(bfa)) {
+		bfa_trc(dport->bfa, BFA_STATUS_PBC);
+		return BFA_STATUS_PBC;
+	}
+
+	/*
+	 * Check to see if port is disable or in dport state
+	 */
+	if ((bfa_fcport_is_disabled(bfa) == BFA_FALSE) &&
+	    (bfa_fcport_is_dport(bfa) == BFA_FALSE)) {
+		bfa_trc(dport->bfa, 0);
+		return BFA_STATUS_PORT_NOT_DISABLED;
+	}
+
+	/*
+	 * Check if dport is busy
+	 */
+	if (bfa_sm_cmp_state(dport, bfa_dport_sm_enabling) ||
+	    bfa_sm_cmp_state(dport, bfa_dport_sm_enabling_qwait) ||
+	    bfa_sm_cmp_state(dport, bfa_dport_sm_disabling) ||
+	    bfa_sm_cmp_state(dport, bfa_dport_sm_disabling_qwait))
+		return BFA_STATUS_DEVBUSY;
+
+	/*
+	 * Check if dport is already disabled
+	 */
+	if (bfa_sm_cmp_state(dport, bfa_dport_sm_disabled)) {
+		bfa_trc(dport->bfa, 0);
+		return BFA_STATUS_DPORT_DISABLED;
+	}
+
+	dport->cbfn = cbfn;
+	dport->cbarg = cbarg;
+
+	bfa_sm_send_event(dport, BFA_DPORT_SM_DISABLE);
+	return BFA_STATUS_OK;
+}
+
+/*
+ *	Get D-port state
+ *
+ * @param[in] *bfa            - bfa data struct
+ */
+
+bfa_status_t
+bfa_dport_get_state(struct bfa_s *bfa, enum bfa_dport_state *state)
+{
+	struct bfa_fcdiag_s *fcdiag = BFA_FCDIAG_MOD(bfa);
+	struct bfa_dport_s *dport = &fcdiag->dport;
+
+	if (bfa_sm_cmp_state(dport, bfa_dport_sm_enabled))
+		*state = BFA_DPORT_ST_ENABLED;
+	else if (bfa_sm_cmp_state(dport, bfa_dport_sm_enabling) ||
+		 bfa_sm_cmp_state(dport, bfa_dport_sm_enabling_qwait))
+		*state = BFA_DPORT_ST_ENABLING;
+	else if (bfa_sm_cmp_state(dport, bfa_dport_sm_disabled))
+		*state = BFA_DPORT_ST_DISABLED;
+	else if (bfa_sm_cmp_state(dport, bfa_dport_sm_disabling) ||
+		 bfa_sm_cmp_state(dport, bfa_dport_sm_disabling_qwait))
+		*state = BFA_DPORT_ST_DISABLING;
+	else {
+		bfa_trc(dport->bfa, BFA_STATUS_EINVAL);
+		return BFA_STATUS_EINVAL;
+	}
+	return BFA_STATUS_OK;
+}
diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h
index 1abcf7c..8d7fbec 100644
--- a/drivers/scsi/bfa/bfa_svc.h
+++ b/drivers/scsi/bfa/bfa_svc.h
@@ -474,8 +474,10 @@
 	/*  supported speeds */
 	enum bfa_port_speed speed;	/*  current speed */
 	enum bfa_port_topology topology;	/*  current topology */
-	u8			myalpa;	/*  my ALPA in LOOP topology */
 	u8			rsvd[3];
+	u8			myalpa;	/*  my ALPA in LOOP topology */
+	u8			alpabm_valid; /* alpa bitmap valid or not */
+	struct fc_alpabm_s	alpabm;	/* alpa bitmap */
 	struct bfa_port_cfg_s	cfg;	/*  current port configuration */
 	bfa_boolean_t		use_flash_cfg; /* get port cfg from flash */
 	struct bfa_qos_attr_s  qos_attr;   /* QoS Attributes */
@@ -512,6 +514,7 @@
 	struct bfa_fcport_trunk_s trunk;
 	u16		fcoe_vlan;
 	struct bfa_mem_dma_s	fcport_dma;
+	bfa_boolean_t		stats_dma_ready;
 };
 
 #define BFA_FCPORT_MOD(__bfa)	(&(__bfa)->modules.fcport)
@@ -534,6 +537,7 @@
 bfa_status_t bfa_fcport_cfg_topology(struct bfa_s *bfa,
 				     enum bfa_port_topology topo);
 enum bfa_port_topology bfa_fcport_get_topology(struct bfa_s *bfa);
+enum bfa_port_topology bfa_fcport_get_cfg_topology(struct bfa_s *bfa);
 bfa_status_t bfa_fcport_cfg_hardalpa(struct bfa_s *bfa, u8 alpa);
 bfa_boolean_t bfa_fcport_get_hardalpa(struct bfa_s *bfa, u8 *alpa);
 u8 bfa_fcport_get_myalpa(struct bfa_s *bfa);
@@ -547,6 +551,9 @@
 			void (*event_cbfn) (void *cbarg,
 			enum bfa_port_linkstate event), void *event_cbarg);
 bfa_boolean_t bfa_fcport_is_disabled(struct bfa_s *bfa);
+bfa_boolean_t bfa_fcport_is_dport(struct bfa_s *bfa);
+bfa_status_t bfa_fcport_set_qos_bw(struct bfa_s *bfa,
+				   struct bfa_qos_bw_s *qos_bw);
 enum bfa_port_speed bfa_fcport_get_ratelim_speed(struct bfa_s *bfa);
 
 void bfa_fcport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit, u8 bb_scn);
@@ -560,6 +567,8 @@
 			struct bfa_cb_pending_q_s *cb);
 bfa_boolean_t bfa_fcport_is_qos_enabled(struct bfa_s *bfa);
 bfa_boolean_t bfa_fcport_is_trunk_enabled(struct bfa_s *bfa);
+void bfa_fcport_dportenable(struct bfa_s *bfa);
+void bfa_fcport_dportdisable(struct bfa_s *bfa);
 bfa_status_t bfa_fcport_is_pbcdisabled(struct bfa_s *bfa);
 void bfa_fcport_cfg_faa(struct bfa_s *bfa, u8 state);
 
@@ -575,6 +584,9 @@
 void bfa_cb_rport_qos_scn_flowid(void *rport,
 				 struct bfa_rport_qos_attr_s old_qos_attr,
 				 struct bfa_rport_qos_attr_s new_qos_attr);
+void bfa_cb_rport_scn_online(struct bfa_s *bfa);
+void bfa_cb_rport_scn_offline(struct bfa_s *bfa);
+void bfa_cb_rport_scn_no_dev(void *rp);
 void bfa_cb_rport_qos_scn_prio(void *rport,
 			       struct bfa_rport_qos_attr_s old_qos_attr,
 			       struct bfa_rport_qos_attr_s new_qos_attr);
@@ -697,11 +709,21 @@
 	u32        status;
 };
 
+struct bfa_dport_s {
+	struct bfa_s	*bfa;		/* Back pointer to BFA	*/
+	bfa_sm_t	sm;		/* finite state machine */
+	u32		msgtag;		/* firmware msg tag for reply */
+	struct bfa_reqq_wait_s reqq_wait;
+	bfa_cb_diag_t	cbfn;
+	void		*cbarg;
+};
+
 struct bfa_fcdiag_s {
 	struct bfa_s    *bfa;           /* Back pointer to BFA */
 	struct bfa_trc_mod_s   *trcmod;
 	struct bfa_fcdiag_lb_s lb;
 	struct bfa_fcdiag_qtest_s qtest;
+	struct bfa_dport_s	dport;
 };
 
 #define BFA_FCDIAG_MOD(__bfa)	(&(__bfa)->modules.fcdiag)
@@ -717,5 +739,11 @@
 			u32 queue, struct bfa_diag_qtest_result_s *result,
 			bfa_cb_diag_t cbfn, void *cbarg);
 bfa_status_t	bfa_fcdiag_lb_is_running(struct bfa_s *bfa);
+bfa_status_t	bfa_dport_enable(struct bfa_s *bfa, bfa_cb_diag_t cbfn,
+				 void *cbarg);
+bfa_status_t	bfa_dport_disable(struct bfa_s *bfa, bfa_cb_diag_t cbfn,
+				  void *cbarg);
+bfa_status_t	bfa_dport_get_state(struct bfa_s *bfa,
+				    enum bfa_dport_state *state);
 
 #endif /* __BFA_SVC_H__ */
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index c374949..895b0e5 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -63,9 +63,9 @@
 u32	bfi_image_cb_size, bfi_image_ct_size, bfi_image_ct2_size;
 u32	*bfi_image_cb, *bfi_image_ct, *bfi_image_ct2;
 
-#define BFAD_FW_FILE_CB		"cbfw.bin"
-#define BFAD_FW_FILE_CT		"ctfw.bin"
-#define BFAD_FW_FILE_CT2	"ct2fw.bin"
+#define BFAD_FW_FILE_CB		"cbfw-3.1.0.0.bin"
+#define BFAD_FW_FILE_CT		"ctfw-3.1.0.0.bin"
+#define BFAD_FW_FILE_CT2	"ct2fw-3.1.0.0.bin"
 
 static u32 *bfad_load_fwimg(struct pci_dev *pdev);
 static void bfad_free_fwimg(void);
diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c
index 0afa390..555e7db 100644
--- a/drivers/scsi/bfa/bfad_bsg.c
+++ b/drivers/scsi/bfa/bfad_bsg.c
@@ -33,7 +33,7 @@
 	/* If IOC is not in disabled state - return */
 	if (!bfa_ioc_is_disabled(&bfad->bfa.ioc)) {
 		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
-		iocmd->status = BFA_STATUS_IOC_FAILURE;
+		iocmd->status = BFA_STATUS_OK;
 		return rc;
 	}
 
@@ -54,6 +54,12 @@
 	unsigned long	flags;
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	if (bfa_ioc_is_disabled(&bfad->bfa.ioc)) {
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+		iocmd->status = BFA_STATUS_OK;
+		return rc;
+	}
+
 	if (bfad->disable_active) {
 		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 		return -EBUSY;
@@ -101,9 +107,10 @@
 
 	/* set adapter hw path */
 	strcpy(iocmd->adapter_hwpath, bfad->pci_name);
-	i = strlen(iocmd->adapter_hwpath) - 1;
-	while (iocmd->adapter_hwpath[i] != '.')
-		i--;
+	for (i = 0; iocmd->adapter_hwpath[i] != ':' && i < BFA_STRING_32; i++)
+		;
+	for (; iocmd->adapter_hwpath[++i] != ':' && i < BFA_STRING_32; )
+		;
 	iocmd->adapter_hwpath[i] = '\0';
 	iocmd->status = BFA_STATUS_OK;
 	return 0;
@@ -880,6 +887,19 @@
 }
 
 int
+bfad_iocmd_qos_set_bw(struct bfad_s *bfad, void *pcmd)
+{
+	struct bfa_bsg_qos_bw_s *iocmd = (struct bfa_bsg_qos_bw_s *)pcmd;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	iocmd->status = bfa_fcport_set_qos_bw(&bfad->bfa, &iocmd->qos_bw);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	return 0;
+}
+
+int
 bfad_iocmd_ratelim(struct bfad_s *bfad, unsigned int cmd, void *pcmd)
 {
 	struct bfa_bsg_gen_s *iocmd = (struct bfa_bsg_gen_s *)pcmd;
@@ -888,16 +908,22 @@
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 
-	if (cmd == IOCMD_RATELIM_ENABLE)
-		fcport->cfg.ratelimit = BFA_TRUE;
-	else if (cmd == IOCMD_RATELIM_DISABLE)
-		fcport->cfg.ratelimit = BFA_FALSE;
+	if ((fcport->cfg.topology == BFA_PORT_TOPOLOGY_LOOP) &&
+		(fcport->topology == BFA_PORT_TOPOLOGY_LOOP))
+		iocmd->status = BFA_STATUS_TOPOLOGY_LOOP;
+	else {
+		if (cmd == IOCMD_RATELIM_ENABLE)
+			fcport->cfg.ratelimit = BFA_TRUE;
+		else if (cmd == IOCMD_RATELIM_DISABLE)
+			fcport->cfg.ratelimit = BFA_FALSE;
 
-	if (fcport->cfg.trl_def_speed == BFA_PORT_SPEED_UNKNOWN)
-		fcport->cfg.trl_def_speed = BFA_PORT_SPEED_1GBPS;
+		if (fcport->cfg.trl_def_speed == BFA_PORT_SPEED_UNKNOWN)
+			fcport->cfg.trl_def_speed = BFA_PORT_SPEED_1GBPS;
+
+		iocmd->status = BFA_STATUS_OK;
+	}
 
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
-	iocmd->status = BFA_STATUS_OK;
 
 	return 0;
 }
@@ -919,8 +945,13 @@
 		return 0;
 	}
 
-	fcport->cfg.trl_def_speed = iocmd->speed;
-	iocmd->status = BFA_STATUS_OK;
+	if ((fcport->cfg.topology == BFA_PORT_TOPOLOGY_LOOP) &&
+		(fcport->topology == BFA_PORT_TOPOLOGY_LOOP))
+		iocmd->status = BFA_STATUS_TOPOLOGY_LOOP;
+	else {
+		fcport->cfg.trl_def_speed = iocmd->speed;
+		iocmd->status = BFA_STATUS_OK;
+	}
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 
 	return 0;
@@ -1167,8 +1198,8 @@
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	iocmd->status = bfa_ablk_pf_create(&bfad->bfa.modules.ablk,
 				&iocmd->pcifn_id, iocmd->port,
-				iocmd->pcifn_class, iocmd->bandwidth,
-				bfad_hcb_comp, &fcomp);
+				iocmd->pcifn_class, iocmd->bw_min,
+				iocmd->bw_max, bfad_hcb_comp, &fcomp);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 	if (iocmd->status != BFA_STATUS_OK)
 		goto out;
@@ -1211,8 +1242,8 @@
 	init_completion(&fcomp.comp);
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	iocmd->status = bfa_ablk_pf_update(&bfad->bfa.modules.ablk,
-				iocmd->pcifn_id, iocmd->bandwidth,
-				bfad_hcb_comp, &fcomp);
+				iocmd->pcifn_id, iocmd->bw_min,
+				iocmd->bw_max, bfad_hcb_comp, &fcomp);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 	bfa_trc(bfad, iocmd->status);
 	if (iocmd->status != BFA_STATUS_OK)
@@ -1736,6 +1767,52 @@
 }
 
 int
+bfad_iocmd_diag_cfg_dport(struct bfad_s *bfad, unsigned int cmd, void *pcmd)
+{
+	struct bfa_bsg_gen_s *iocmd = (struct bfa_bsg_gen_s *)pcmd;
+	unsigned long	flags;
+	struct bfad_hal_comp fcomp;
+
+	init_completion(&fcomp.comp);
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	if (cmd == IOCMD_DIAG_DPORT_ENABLE)
+		iocmd->status = bfa_dport_enable(&bfad->bfa,
+					bfad_hcb_comp, &fcomp);
+	else if (cmd == IOCMD_DIAG_DPORT_DISABLE)
+		iocmd->status = bfa_dport_disable(&bfad->bfa,
+					bfad_hcb_comp, &fcomp);
+	else {
+		bfa_trc(bfad, 0);
+		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	if (iocmd->status != BFA_STATUS_OK)
+		bfa_trc(bfad, iocmd->status);
+	else {
+		wait_for_completion(&fcomp.comp);
+		iocmd->status = fcomp.status;
+	}
+
+	return 0;
+}
+
+int
+bfad_iocmd_diag_dport_get_state(struct bfad_s *bfad, void *pcmd)
+{
+	struct bfa_bsg_diag_dport_get_state_s *iocmd =
+			(struct bfa_bsg_diag_dport_get_state_s *)pcmd;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	iocmd->status = bfa_dport_get_state(&bfad->bfa, &iocmd->state);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	return 0;
+}
+
+int
 bfad_iocmd_phy_get_attr(struct bfad_s *bfad, void *cmd)
 {
 	struct bfa_bsg_phy_attr_s *iocmd =
@@ -2052,7 +2129,7 @@
 	init_completion(&fcomp.comp);
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	iocmd->status = bfa_flash_update_part(BFA_FLASH(&bfad->bfa),
-			BFA_FLASH_PART_BOOT, PCI_FUNC(bfad->pcidev->devfn),
+			BFA_FLASH_PART_BOOT, bfad->bfa.ioc.port_id,
 			&iocmd->cfg, sizeof(struct bfa_boot_cfg_s), 0,
 			bfad_hcb_comp, &fcomp);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
@@ -2074,7 +2151,7 @@
 	init_completion(&fcomp.comp);
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	iocmd->status = bfa_flash_read_part(BFA_FLASH(&bfad->bfa),
-			BFA_FLASH_PART_BOOT, PCI_FUNC(bfad->pcidev->devfn),
+			BFA_FLASH_PART_BOOT, bfad->bfa.ioc.port_id,
 			&iocmd->cfg, sizeof(struct bfa_boot_cfg_s), 0,
 			bfad_hcb_comp, &fcomp);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
@@ -2161,22 +2238,31 @@
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 
-	if (v_cmd == IOCMD_TRUNK_ENABLE) {
-		trunk->attr.state = BFA_TRUNK_OFFLINE;
-		bfa_fcport_disable(&bfad->bfa);
-		fcport->cfg.trunked = BFA_TRUE;
-	} else if (v_cmd == IOCMD_TRUNK_DISABLE) {
-		trunk->attr.state = BFA_TRUNK_DISABLED;
-		bfa_fcport_disable(&bfad->bfa);
-		fcport->cfg.trunked = BFA_FALSE;
-	}
+	if (bfa_fcport_is_dport(&bfad->bfa))
+		return BFA_STATUS_DPORT_ERR;
 
-	if (!bfa_fcport_is_disabled(&bfad->bfa))
-		bfa_fcport_enable(&bfad->bfa);
+	if ((fcport->cfg.topology == BFA_PORT_TOPOLOGY_LOOP) ||
+		(fcport->topology == BFA_PORT_TOPOLOGY_LOOP))
+		iocmd->status = BFA_STATUS_TOPOLOGY_LOOP;
+	else {
+		if (v_cmd == IOCMD_TRUNK_ENABLE) {
+			trunk->attr.state = BFA_TRUNK_OFFLINE;
+			bfa_fcport_disable(&bfad->bfa);
+			fcport->cfg.trunked = BFA_TRUE;
+		} else if (v_cmd == IOCMD_TRUNK_DISABLE) {
+			trunk->attr.state = BFA_TRUNK_DISABLED;
+			bfa_fcport_disable(&bfad->bfa);
+			fcport->cfg.trunked = BFA_FALSE;
+		}
+
+		if (!bfa_fcport_is_disabled(&bfad->bfa))
+			bfa_fcport_enable(&bfad->bfa);
+
+		iocmd->status = BFA_STATUS_OK;
+	}
 
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 
-	iocmd->status = BFA_STATUS_OK;
 	return 0;
 }
 
@@ -2189,12 +2275,17 @@
 	unsigned long	flags;
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
-	memcpy((void *)&iocmd->attr, (void *)&trunk->attr,
-		sizeof(struct bfa_trunk_attr_s));
-	iocmd->attr.port_id = bfa_lps_get_base_pid(&bfad->bfa);
+	if ((fcport->cfg.topology == BFA_PORT_TOPOLOGY_LOOP) ||
+		(fcport->topology == BFA_PORT_TOPOLOGY_LOOP))
+		iocmd->status = BFA_STATUS_TOPOLOGY_LOOP;
+	else {
+		memcpy((void *)&iocmd->attr, (void *)&trunk->attr,
+			sizeof(struct bfa_trunk_attr_s));
+		iocmd->attr.port_id = bfa_lps_get_base_pid(&bfad->bfa);
+		iocmd->status = BFA_STATUS_OK;
+	}
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 
-	iocmd->status = BFA_STATUS_OK;
 	return 0;
 }
 
@@ -2207,14 +2298,22 @@
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	if (bfa_ioc_get_type(&bfad->bfa.ioc) == BFA_IOC_TYPE_FC) {
-		if (v_cmd == IOCMD_QOS_ENABLE)
-			fcport->cfg.qos_enabled = BFA_TRUE;
-		else if (v_cmd == IOCMD_QOS_DISABLE)
-			fcport->cfg.qos_enabled = BFA_FALSE;
+		if ((fcport->cfg.topology == BFA_PORT_TOPOLOGY_LOOP) &&
+		(fcport->topology == BFA_PORT_TOPOLOGY_LOOP))
+			iocmd->status = BFA_STATUS_TOPOLOGY_LOOP;
+		else {
+			if (v_cmd == IOCMD_QOS_ENABLE)
+				fcport->cfg.qos_enabled = BFA_TRUE;
+			else if (v_cmd == IOCMD_QOS_DISABLE) {
+				fcport->cfg.qos_enabled = BFA_FALSE;
+				fcport->cfg.qos_bw.high = BFA_QOS_BW_HIGH;
+				fcport->cfg.qos_bw.med = BFA_QOS_BW_MED;
+				fcport->cfg.qos_bw.low = BFA_QOS_BW_LOW;
+			}
+		}
 	}
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 
-	iocmd->status = BFA_STATUS_OK;
 	return 0;
 }
 
@@ -2226,11 +2325,21 @@
 	unsigned long	flags;
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
-	iocmd->attr.state = fcport->qos_attr.state;
-	iocmd->attr.total_bb_cr = be32_to_cpu(fcport->qos_attr.total_bb_cr);
+	if ((fcport->cfg.topology == BFA_PORT_TOPOLOGY_LOOP) &&
+		(fcport->topology == BFA_PORT_TOPOLOGY_LOOP))
+		iocmd->status = BFA_STATUS_TOPOLOGY_LOOP;
+	else {
+		iocmd->attr.state = fcport->qos_attr.state;
+		iocmd->attr.total_bb_cr =
+			be32_to_cpu(fcport->qos_attr.total_bb_cr);
+		iocmd->attr.qos_bw.high = fcport->cfg.qos_bw.high;
+		iocmd->attr.qos_bw.med = fcport->cfg.qos_bw.med;
+		iocmd->attr.qos_bw.low = fcport->cfg.qos_bw.low;
+		iocmd->attr.qos_bw_op = fcport->qos_attr.qos_bw_op;
+		iocmd->status = BFA_STATUS_OK;
+	}
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 
-	iocmd->status = BFA_STATUS_OK;
 	return 0;
 }
 
@@ -2274,6 +2383,7 @@
 	struct bfad_hal_comp fcomp;
 	unsigned long	flags;
 	struct bfa_cb_pending_q_s cb_qe;
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(&bfad->bfa);
 
 	init_completion(&fcomp.comp);
 	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp,
@@ -2281,7 +2391,11 @@
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	WARN_ON(!bfa_ioc_get_fcmode(&bfad->bfa.ioc));
-	iocmd->status = bfa_fcport_get_stats(&bfad->bfa, &cb_qe);
+	if ((fcport->cfg.topology == BFA_PORT_TOPOLOGY_LOOP) &&
+		(fcport->topology == BFA_PORT_TOPOLOGY_LOOP))
+		iocmd->status = BFA_STATUS_TOPOLOGY_LOOP;
+	else
+		iocmd->status = bfa_fcport_get_stats(&bfad->bfa, &cb_qe);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 	if (iocmd->status != BFA_STATUS_OK) {
 		bfa_trc(bfad, iocmd->status);
@@ -2300,6 +2414,7 @@
 	struct bfad_hal_comp fcomp;
 	unsigned long	flags;
 	struct bfa_cb_pending_q_s cb_qe;
+	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(&bfad->bfa);
 
 	init_completion(&fcomp.comp);
 	bfa_pending_q_init(&cb_qe, (bfa_cb_cbfn_t)bfad_hcb_comp,
@@ -2307,7 +2422,11 @@
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	WARN_ON(!bfa_ioc_get_fcmode(&bfad->bfa.ioc));
-	iocmd->status = bfa_fcport_clear_stats(&bfad->bfa, &cb_qe);
+	if ((fcport->cfg.topology == BFA_PORT_TOPOLOGY_LOOP) &&
+		(fcport->topology == BFA_PORT_TOPOLOGY_LOOP))
+		iocmd->status = BFA_STATUS_TOPOLOGY_LOOP;
+	else
+		iocmd->status = bfa_fcport_clear_stats(&bfad->bfa, &cb_qe);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 	if (iocmd->status != BFA_STATUS_OK) {
 		bfa_trc(bfad, iocmd->status);
@@ -2435,6 +2554,139 @@
 	return 0;
 }
 
+int
+bfad_iocmd_fcpim_throttle_query(struct bfad_s *bfad, void *cmd)
+{
+	struct bfa_bsg_fcpim_throttle_s *iocmd =
+			(struct bfa_bsg_fcpim_throttle_s *)cmd;
+	unsigned long   flags;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	iocmd->status = bfa_fcpim_throttle_get(&bfad->bfa,
+				(void *)&iocmd->throttle);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	return 0;
+}
+
+int
+bfad_iocmd_fcpim_throttle_set(struct bfad_s *bfad, void *cmd)
+{
+	struct bfa_bsg_fcpim_throttle_s *iocmd =
+			(struct bfa_bsg_fcpim_throttle_s *)cmd;
+	unsigned long	flags;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	iocmd->status = bfa_fcpim_throttle_set(&bfad->bfa,
+				iocmd->throttle.cfg_value);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	return 0;
+}
+
+int
+bfad_iocmd_tfru_read(struct bfad_s *bfad, void *cmd)
+{
+	struct bfa_bsg_tfru_s *iocmd =
+			(struct bfa_bsg_tfru_s *)cmd;
+	struct bfad_hal_comp fcomp;
+	unsigned long flags = 0;
+
+	init_completion(&fcomp.comp);
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	iocmd->status = bfa_tfru_read(BFA_FRU(&bfad->bfa),
+				&iocmd->data, iocmd->len, iocmd->offset,
+				bfad_hcb_comp, &fcomp);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	if (iocmd->status == BFA_STATUS_OK) {
+		wait_for_completion(&fcomp.comp);
+		iocmd->status = fcomp.status;
+	}
+
+	return 0;
+}
+
+int
+bfad_iocmd_tfru_write(struct bfad_s *bfad, void *cmd)
+{
+	struct bfa_bsg_tfru_s *iocmd =
+			(struct bfa_bsg_tfru_s *)cmd;
+	struct bfad_hal_comp fcomp;
+	unsigned long flags = 0;
+
+	init_completion(&fcomp.comp);
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	iocmd->status = bfa_tfru_write(BFA_FRU(&bfad->bfa),
+				&iocmd->data, iocmd->len, iocmd->offset,
+				bfad_hcb_comp, &fcomp);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	if (iocmd->status == BFA_STATUS_OK) {
+		wait_for_completion(&fcomp.comp);
+		iocmd->status = fcomp.status;
+	}
+
+	return 0;
+}
+
+int
+bfad_iocmd_fruvpd_read(struct bfad_s *bfad, void *cmd)
+{
+	struct bfa_bsg_fruvpd_s *iocmd =
+			(struct bfa_bsg_fruvpd_s *)cmd;
+	struct bfad_hal_comp fcomp;
+	unsigned long flags = 0;
+
+	init_completion(&fcomp.comp);
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	iocmd->status = bfa_fruvpd_read(BFA_FRU(&bfad->bfa),
+				&iocmd->data, iocmd->len, iocmd->offset,
+				bfad_hcb_comp, &fcomp);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	if (iocmd->status == BFA_STATUS_OK) {
+		wait_for_completion(&fcomp.comp);
+		iocmd->status = fcomp.status;
+	}
+
+	return 0;
+}
+
+int
+bfad_iocmd_fruvpd_update(struct bfad_s *bfad, void *cmd)
+{
+	struct bfa_bsg_fruvpd_s *iocmd =
+			(struct bfa_bsg_fruvpd_s *)cmd;
+	struct bfad_hal_comp fcomp;
+	unsigned long flags = 0;
+
+	init_completion(&fcomp.comp);
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	iocmd->status = bfa_fruvpd_update(BFA_FRU(&bfad->bfa),
+				&iocmd->data, iocmd->len, iocmd->offset,
+				bfad_hcb_comp, &fcomp);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	if (iocmd->status == BFA_STATUS_OK) {
+		wait_for_completion(&fcomp.comp);
+		iocmd->status = fcomp.status;
+	}
+
+	return 0;
+}
+
+int
+bfad_iocmd_fruvpd_get_max_size(struct bfad_s *bfad, void *cmd)
+{
+	struct bfa_bsg_fruvpd_max_size_s *iocmd =
+			(struct bfa_bsg_fruvpd_max_size_s *)cmd;
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	iocmd->status = bfa_fruvpd_get_max_size(BFA_FRU(&bfad->bfa),
+						&iocmd->max_size);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+	return 0;
+}
+
 static int
 bfad_iocmd_handler(struct bfad_s *bfad, unsigned int cmd, void *iocmd,
 		unsigned int payload_len)
@@ -2660,6 +2912,13 @@
 	case IOCMD_DIAG_LB_STAT:
 		rc = bfad_iocmd_diag_lb_stat(bfad, iocmd);
 		break;
+	case IOCMD_DIAG_DPORT_ENABLE:
+	case IOCMD_DIAG_DPORT_DISABLE:
+		rc = bfad_iocmd_diag_cfg_dport(bfad, cmd, iocmd);
+		break;
+	case IOCMD_DIAG_DPORT_GET_STATE:
+		rc = bfad_iocmd_diag_dport_get_state(bfad, iocmd);
+		break;
 	case IOCMD_PHY_GET_ATTR:
 		rc = bfad_iocmd_phy_get_attr(bfad, iocmd);
 		break;
@@ -2741,6 +3000,9 @@
 	case IOCMD_QOS_RESET_STATS:
 		rc = bfad_iocmd_qos_reset_stats(bfad, iocmd);
 		break;
+	case IOCMD_QOS_SET_BW:
+		rc = bfad_iocmd_qos_set_bw(bfad, iocmd);
+		break;
 	case IOCMD_VF_GET_STATS:
 		rc = bfad_iocmd_vf_get_stats(bfad, iocmd);
 		break;
@@ -2759,6 +3021,29 @@
 	case IOCMD_FCPIM_LUNMASK_DELETE:
 		rc = bfad_iocmd_fcpim_cfg_lunmask(bfad, iocmd, cmd);
 		break;
+	case IOCMD_FCPIM_THROTTLE_QUERY:
+		rc = bfad_iocmd_fcpim_throttle_query(bfad, iocmd);
+		break;
+	case IOCMD_FCPIM_THROTTLE_SET:
+		rc = bfad_iocmd_fcpim_throttle_set(bfad, iocmd);
+		break;
+	/* TFRU */
+	case IOCMD_TFRU_READ:
+		rc = bfad_iocmd_tfru_read(bfad, iocmd);
+		break;
+	case IOCMD_TFRU_WRITE:
+		rc = bfad_iocmd_tfru_write(bfad, iocmd);
+		break;
+	/* FRU */
+	case IOCMD_FRUVPD_READ:
+		rc = bfad_iocmd_fruvpd_read(bfad, iocmd);
+		break;
+	case IOCMD_FRUVPD_UPDATE:
+		rc = bfad_iocmd_fruvpd_update(bfad, iocmd);
+		break;
+	case IOCMD_FRUVPD_GET_MAX_SIZE:
+		rc = bfad_iocmd_fruvpd_get_max_size(bfad, iocmd);
+		break;
 	default:
 		rc = -EINVAL;
 		break;
diff --git a/drivers/scsi/bfa/bfad_bsg.h b/drivers/scsi/bfa/bfad_bsg.h
index 8c569dd..15e1fc8 100644
--- a/drivers/scsi/bfa/bfad_bsg.h
+++ b/drivers/scsi/bfa/bfad_bsg.h
@@ -141,6 +141,17 @@
 	IOCMD_FCPIM_LUNMASK_QUERY,
 	IOCMD_FCPIM_LUNMASK_ADD,
 	IOCMD_FCPIM_LUNMASK_DELETE,
+	IOCMD_DIAG_DPORT_ENABLE,
+	IOCMD_DIAG_DPORT_DISABLE,
+	IOCMD_DIAG_DPORT_GET_STATE,
+	IOCMD_QOS_SET_BW,
+	IOCMD_FCPIM_THROTTLE_QUERY,
+	IOCMD_FCPIM_THROTTLE_SET,
+	IOCMD_TFRU_READ,
+	IOCMD_TFRU_WRITE,
+	IOCMD_FRUVPD_READ,
+	IOCMD_FRUVPD_UPDATE,
+	IOCMD_FRUVPD_GET_MAX_SIZE,
 };
 
 struct bfa_bsg_gen_s {
@@ -463,7 +474,8 @@
 	bfa_status_t		status;
 	u16			bfad_num;
 	u16			pcifn_id;
-	u32			bandwidth;
+	u16			bw_min;
+	u16			bw_max;
 	u8			port;
 	enum bfi_pcifn_class	pcifn_class;
 	u8			rsvd[1];
@@ -613,6 +625,13 @@
 	u16		rsvd;
 };
 
+struct bfa_bsg_diag_dport_get_state_s {
+	bfa_status_t	status;
+	u16		bfad_num;
+	u16		rsvd;
+	enum bfa_dport_state state;
+};
+
 struct bfa_bsg_phy_attr_s {
 	bfa_status_t	status;
 	u16	bfad_num;
@@ -694,6 +713,13 @@
 	struct bfa_qos_vc_attr_s attr;
 };
 
+struct bfa_bsg_qos_bw_s {
+	bfa_status_t	status;
+	u16		bfad_num;
+	u16		rsvd;
+	struct bfa_qos_bw_s qos_bw;
+};
+
 struct bfa_bsg_vf_stats_s {
 	bfa_status_t	status;
 	u16		bfad_num;
@@ -722,6 +748,41 @@
 	struct scsi_lun	lun;
 };
 
+struct bfa_bsg_fcpim_throttle_s {
+	bfa_status_t	status;
+	u16		bfad_num;
+	u16		vf_id;
+	struct bfa_defs_fcpim_throttle_s throttle;
+};
+
+#define BFA_TFRU_DATA_SIZE		64
+#define BFA_MAX_FRUVPD_TRANSFER_SIZE	0x1000
+
+struct bfa_bsg_tfru_s {
+	bfa_status_t	status;
+	u16		bfad_num;
+	u16		rsvd;
+	u32		offset;
+	u32		len;
+	u8		data[BFA_TFRU_DATA_SIZE];
+};
+
+struct bfa_bsg_fruvpd_s {
+	bfa_status_t	status;
+	u16		bfad_num;
+	u16		rsvd;
+	u32		offset;
+	u32		len;
+	u8		data[BFA_MAX_FRUVPD_TRANSFER_SIZE];
+};
+
+struct bfa_bsg_fruvpd_max_size_s {
+	bfa_status_t	status;
+	u16		bfad_num;
+	u16		rsvd;
+	u32		max_size;
+};
+
 struct bfa_bsg_fcpt_s {
 	bfa_status_t    status;
 	u16		vf_id;
diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h
index 1840651..0c64a04 100644
--- a/drivers/scsi/bfa/bfad_drv.h
+++ b/drivers/scsi/bfa/bfad_drv.h
@@ -57,7 +57,7 @@
 #ifdef BFA_DRIVER_VERSION
 #define BFAD_DRIVER_VERSION    BFA_DRIVER_VERSION
 #else
-#define BFAD_DRIVER_VERSION    "3.1.2.0"
+#define BFAD_DRIVER_VERSION    "3.1.2.1"
 #endif
 
 #define BFAD_PROTO_NAME FCPI_NAME
diff --git a/drivers/scsi/bfa/bfi.h b/drivers/scsi/bfa/bfi.h
index b2ba0b2..57b146b 100644
--- a/drivers/scsi/bfa/bfi.h
+++ b/drivers/scsi/bfa/bfi.h
@@ -210,7 +210,8 @@
 	BFI_MC_PORT		= 21,	/*  Physical port		    */
 	BFI_MC_SFP		= 22,	/*  SFP module	*/
 	BFI_MC_PHY		= 25,   /*  External PHY message class	*/
-	BFI_MC_MAX		= 32
+	BFI_MC_FRU		= 34,
+	BFI_MC_MAX		= 35
 };
 
 #define BFI_IOC_MAX_CQS		4
@@ -288,6 +289,9 @@
 	char		optrom_version[BFA_VERSION_LEN];
 	struct		bfa_mfg_vpd_s	vpd;
 	u32	card_type;	/*  card type			*/
+	u8	mfg_day;	/* manufacturing day */
+	u8	mfg_month;	/* manufacturing month */
+	u16	mfg_year;	/* manufacturing year */
 };
 
 /*
@@ -687,7 +691,8 @@
 	u8			pcifn;
 	u8			port;
 	u16			pers;
-	u32			bw;
+	u16			bw_min; /* percent BW @ max speed */
+	u16			bw_max; /* percent BW @ max speed */
 };
 
 /* BFI_ABLK_H2I_OPTROM_ENABLE, BFI_ABLK_H2I_OPTROM_DISABLE */
@@ -957,6 +962,7 @@
 	BFI_DIAG_H2I_TEMPSENSOR = 4,
 	BFI_DIAG_H2I_LEDTEST = 5,
 	BFI_DIAG_H2I_QTEST      = 6,
+	BFI_DIAG_H2I_DPORT	= 7,
 };
 
 enum bfi_diag_i2h {
@@ -966,6 +972,7 @@
 	BFI_DIAG_I2H_TEMPSENSOR = BFA_I2HM(BFI_DIAG_H2I_TEMPSENSOR),
 	BFI_DIAG_I2H_LEDTEST = BFA_I2HM(BFI_DIAG_H2I_LEDTEST),
 	BFI_DIAG_I2H_QTEST      = BFA_I2HM(BFI_DIAG_H2I_QTEST),
+	BFI_DIAG_I2H_DPORT	= BFA_I2HM(BFI_DIAG_H2I_DPORT),
 };
 
 #define BFI_DIAG_MAX_SGES	2
@@ -1052,6 +1059,23 @@
 #define bfi_diag_qtest_rsp_t struct bfi_diag_qtest_req_s
 
 /*
+ *	D-port test
+ */
+enum bfi_dport_req {
+	BFI_DPORT_DISABLE	= 0,	/* disable dport request	*/
+	BFI_DPORT_ENABLE	= 1,	/* enable dport request		*/
+};
+
+struct bfi_diag_dport_req_s {
+	struct bfi_mhdr_s	mh;	/* 4 bytes                      */
+	u8			req;    /* request 1: enable 0: disable */
+	u8			status; /* reply status			*/
+	u8			rsvd[2];
+	u32			msgtag; /* msgtag for reply		*/
+};
+#define bfi_diag_dport_rsp_t struct bfi_diag_dport_req_s
+
+/*
  *	PHY module specific
  */
 enum bfi_phy_h2i_msgs_e {
@@ -1147,6 +1171,50 @@
 	u32			length;
 };
 
+enum bfi_fru_h2i_msgs {
+	BFI_FRUVPD_H2I_WRITE_REQ = 1,
+	BFI_FRUVPD_H2I_READ_REQ = 2,
+	BFI_TFRU_H2I_WRITE_REQ = 3,
+	BFI_TFRU_H2I_READ_REQ = 4,
+};
+
+enum bfi_fru_i2h_msgs {
+	BFI_FRUVPD_I2H_WRITE_RSP = BFA_I2HM(1),
+	BFI_FRUVPD_I2H_READ_RSP = BFA_I2HM(2),
+	BFI_TFRU_I2H_WRITE_RSP = BFA_I2HM(3),
+	BFI_TFRU_I2H_READ_RSP = BFA_I2HM(4),
+};
+
+/*
+ * FRU write request
+ */
+struct bfi_fru_write_req_s {
+	struct bfi_mhdr_s	mh;	/* Common msg header */
+	u8			last;
+	u8			rsv[3];
+	u32			offset;
+	u32			length;
+	struct bfi_alen_s	alen;
+};
+
+/*
+ * FRU read request
+ */
+struct bfi_fru_read_req_s {
+	struct bfi_mhdr_s	mh;	/* Common msg header */
+	u32			offset;
+	u32			length;
+	struct bfi_alen_s	alen;
+};
+
+/*
+ * FRU response
+ */
+struct bfi_fru_rsp_s {
+	struct bfi_mhdr_s	mh;	/* Common msg header */
+	u32			status;
+	u32			length;
+};
 #pragma pack()
 
 #endif /* __BFI_H__ */
diff --git a/drivers/scsi/bfa/bfi_ms.h b/drivers/scsi/bfa/bfi_ms.h
index d4220e1..5ae2c16 100644
--- a/drivers/scsi/bfa/bfi_ms.h
+++ b/drivers/scsi/bfa/bfi_ms.h
@@ -426,6 +426,7 @@
 	u8		auth_en;
 	u8		lps_role;
 	u8		bb_scn;
+	u32		vvl_flag;
 };
 
 struct bfi_lps_login_rsp_s {
@@ -499,6 +500,9 @@
 	BFI_RPORT_I2H_CREATE_RSP = BFA_I2HM(1),
 	BFI_RPORT_I2H_DELETE_RSP = BFA_I2HM(2),
 	BFI_RPORT_I2H_QOS_SCN    = BFA_I2HM(3),
+	BFI_RPORT_I2H_LIP_SCN_ONLINE =	BFA_I2HM(4),
+	BFI_RPORT_I2H_LIP_SCN_OFFLINE = BFA_I2HM(5),
+	BFI_RPORT_I2H_NO_DEV	= BFA_I2HM(6),
 };
 
 struct bfi_rport_create_req_s {
@@ -551,6 +555,14 @@
 	struct bfa_rport_qos_attr_s new_qos_attr;  /* New QoS Attributes */
 };
 
+struct bfi_rport_lip_scn_s {
+	struct bfi_mhdr_s  mh;		/*!< common msg header	*/
+	u16	bfa_handle;	/*!< host rport handle	*/
+	u8		status;		/*!< scn online status	*/
+	u8		rsvd;
+	struct bfa_fcport_loop_info_s	loop_info;
+};
+
 union bfi_rport_h2i_msg_u {
 	struct bfi_msg_s		*msg;
 	struct bfi_rport_create_req_s	*create_req;
@@ -563,6 +575,7 @@
 	struct bfi_rport_create_rsp_s	*create_rsp;
 	struct bfi_rport_delete_rsp_s	*delete_rsp;
 	struct bfi_rport_qos_scn_s	*qos_scn_evt;
+	struct bfi_rport_lip_scn_s	*lip_scn;
 };
 
 /*
@@ -828,6 +841,7 @@
 	 */
 	BFI_TSKIM_STS_TIMEOUT  = 10,	/*  TM request timedout	*/
 	BFI_TSKIM_STS_ABORTED  = 11,	/*  Aborted on host request */
+	BFI_TSKIM_STS_UTAG     = 12,	/*  unknown tag for request */
 };
 
 struct bfi_tskim_rsp_s {
diff --git a/drivers/scsi/bfa/bfi_reg.h b/drivers/scsi/bfa/bfi_reg.h
index ed5f159..99133bc 100644
--- a/drivers/scsi/bfa/bfi_reg.h
+++ b/drivers/scsi/bfa/bfi_reg.h
@@ -338,6 +338,7 @@
 #define __A2T_AHB_LOAD			0x00000800
 #define __WGN_READY			0x00000400
 #define __GLBL_PF_VF_CFG_RDY		0x00000200
+#define CT2_NFC_STS_REG			0x00027410
 #define CT2_NFC_CSR_CLR_REG		0x00027420
 #define CT2_NFC_CSR_SET_REG		0x00027424
 #define __HALT_NFC_CONTROLLER		0x00000002
@@ -355,6 +356,8 @@
 	(CT2_CSI_MAC0_CONTROL_REG +	\
 	(__n) * (CT2_CSI_MAC1_CONTROL_REG - CT2_CSI_MAC0_CONTROL_REG))
 
+#define CT2_NFC_FLASH_STS_REG		0x00014834
+#define __FLASH_PLL_INIT_AND_RESET_IN_PROGRESS	0x00000020
 /*
  * Name semaphore registers based on usage
  */
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 078d262..666b7ac 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -1643,7 +1643,7 @@
 	skb_reset_network_header(skb);
 	skb->mac_len = elen;
 	skb->protocol = htons(ETH_P_FCOE);
-	skb->priority = port->priority;
+	skb->priority = fcoe->priority;
 
 	if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN &&
 	    fcoe->realdev->features & NETIF_F_HW_VLAN_TX) {
@@ -1917,7 +1917,6 @@
 	struct fcoe_ctlr *ctlr;
 	struct fcoe_interface *fcoe;
 	struct net_device *netdev;
-	struct fcoe_port *port;
 	int prio;
 
 	if (entry->app.selector != DCB_APP_IDTYPE_ETHTYPE)
@@ -1946,10 +1945,8 @@
 	    entry->app.protocol == ETH_P_FCOE)
 		ctlr->priority = prio;
 
-	if (entry->app.protocol == ETH_P_FCOE) {
-		port = lport_priv(ctlr->lp);
-		port->priority = prio;
-	}
+	if (entry->app.protocol == ETH_P_FCOE)
+		fcoe->priority = prio;
 
 	return NOTIFY_OK;
 }
@@ -2180,7 +2177,6 @@
 	u8 fup, up;
 	struct net_device *netdev = fcoe->realdev;
 	struct fcoe_ctlr *ctlr = fcoe_to_ctlr(fcoe);
-	struct fcoe_port *port = lport_priv(ctlr->lp);
 	struct dcb_app app = {
 				.priority = 0,
 				.protocol = ETH_P_FCOE
@@ -2202,8 +2198,8 @@
 			fup = dcb_getapp(netdev, &app);
 		}
 
-		port->priority = ffs(up) ? ffs(up) - 1 : 0;
-		ctlr->priority = ffs(fup) ? ffs(fup) - 1 : port->priority;
+		fcoe->priority = ffs(up) ? ffs(up) - 1 : 0;
+		ctlr->priority = ffs(fup) ? ffs(fup) - 1 : fcoe->priority;
 	}
 #endif
 }
diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h
index a624add4..b42dc32c 100644
--- a/drivers/scsi/fcoe/fcoe.h
+++ b/drivers/scsi/fcoe/fcoe.h
@@ -71,6 +71,7 @@
  * @oem:	      The offload exchange manager for all local port
  *		      instances associated with this port
  * @removed:	      Indicates fcoe interface removed from net device
+ * @priority:	      Priority for the FCoE packet (DCB)
  * This structure is 1:1 with a net device.
  */
 struct fcoe_interface {
@@ -81,6 +82,7 @@
 	struct packet_type fip_packet_type;
 	struct fc_exch_mgr *oem;
 	u8	removed;
+	u8	priority;
 };
 
 #define fcoe_to_ctlr(x)						\
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 14243fa..fcb9d0b 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -851,7 +851,8 @@
 			fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
 			if (flags & FCP_RSP_LEN_VAL) {
 				respl = ntohl(rp_ex->fr_rsp_len);
-				if (respl != sizeof(*fc_rp_info))
+				if ((respl != FCP_RESP_RSP_INFO_LEN4) &&
+				    (respl != FCP_RESP_RSP_INFO_LEN8))
 					goto len_err;
 				if (fsp->wait_for_comp) {
 					/* Abuse cdb_status for rsp code */
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index a184c24..69b5993 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -27,6 +27,8 @@
 
 struct lpfc_sli2_slim;
 
+#define ELX_MODEL_NAME_SIZE	80
+
 #define LPFC_PCI_DEV_LP		0x1
 #define LPFC_PCI_DEV_OC		0x2
 
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index b032562..ad16e54 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3935,6 +3935,12 @@
 # 	- Only meaningful if BG is turned on (lpfc_enable_bg=1).
 #	- Allows you to ultimately specify which profiles to use
 #	- Default will result in registering capabilities for all profiles.
+#	- SHOST_DIF_TYPE1_PROTECTION	1
+#		HBA supports T10 DIF Type 1: HBA to Target Type 1 Protection
+#	- SHOST_DIX_TYPE0_PROTECTION	8
+#		HBA supports DIX Type 0: Host to HBA protection only
+#	- SHOST_DIX_TYPE1_PROTECTION	16
+#		HBA supports DIX Type 1: Host to HBA  Type 1 protection
 #
 */
 unsigned int lpfc_prot_mask = SHOST_DIF_TYPE1_PROTECTION |
@@ -3947,7 +3953,7 @@
 /*
 # lpfc_prot_guard: i
 #	- Bit mask of protection guard types to register with the SCSI mid-layer
-# 	- Guard types are currently either 1) IP checksum 2) T10-DIF CRC
+#	- Guard types are currently either 1) T10-DIF CRC 2) IP checksum
 #	- Allows you to ultimately specify which profiles to use
 #	- Default will result in registering capabilities for all guard types
 #
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index e470c48..4380a44 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -467,3 +467,4 @@
 void lpfc_sli4_node_prep(struct lpfc_hba *);
 int lpfc_sli4_xri_sgl_update(struct lpfc_hba *);
 void lpfc_free_sgl_list(struct lpfc_hba *, struct list_head *);
+uint32_t lpfc_sli_port_speed_get(struct lpfc_hba *);
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index cfe533b..f19e9b6 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -809,6 +809,8 @@
 	phba->fc_ratov = FF_DEF_RATOV;
 	rc = memcmp(&vport->fc_portname, &sp->portName,
 		    sizeof(vport->fc_portname));
+	memcpy(&phba->fc_fabparam, sp, sizeof(struct serv_parm));
+
 	if (rc >= 0) {
 		/* This side will initiate the PLOGI */
 		spin_lock_irq(shost->host_lock);
@@ -3160,7 +3162,8 @@
 				retry = 1;
 				break;
 			}
-			if (cmd == ELS_CMD_PLOGI) {
+			if ((cmd == ELS_CMD_PLOGI) ||
+			    (cmd == ELS_CMD_PRLI)) {
 				delay = 1000;
 				maxretry = lpfc_max_els_tries + 1;
 				retry = 1;
@@ -3305,7 +3308,7 @@
 			ndlp->nlp_prev_state = ndlp->nlp_state;
 			if (cmd == ELS_CMD_PRLI)
 				lpfc_nlp_set_state(vport, ndlp,
-					NLP_STE_REG_LOGIN_ISSUE);
+					NLP_STE_PRLI_ISSUE);
 			else
 				lpfc_nlp_set_state(vport, ndlp,
 					NLP_STE_NPR_NODE);
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index e9845d2..d7096ad 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1506,9 +1506,10 @@
 		}
 	}
 
-	/* If FCF not available return 0 */
+	/* FCF not valid/available or solicitation in progress */
 	if (!bf_get(lpfc_fcf_record_fcf_avail, new_fcf_record) ||
-		!bf_get(lpfc_fcf_record_fcf_valid, new_fcf_record))
+	    !bf_get(lpfc_fcf_record_fcf_valid, new_fcf_record) ||
+	    bf_get(lpfc_fcf_record_fcf_sol, new_fcf_record))
 		return 0;
 
 	if (!(phba->hba_flag & HBA_FIP_SUPPORT)) {
@@ -1842,6 +1843,7 @@
 			"\tFCF_Index     : x%x\n"
 			"\tFCF_Avail     : x%x\n"
 			"\tFCF_Valid     : x%x\n"
+			"\tFCF_SOL       : x%x\n"
 			"\tFIP_Priority  : x%x\n"
 			"\tMAC_Provider  : x%x\n"
 			"\tLowest VLANID : x%x\n"
@@ -1852,6 +1854,7 @@
 			bf_get(lpfc_fcf_record_fcf_index, fcf_record),
 			bf_get(lpfc_fcf_record_fcf_avail, fcf_record),
 			bf_get(lpfc_fcf_record_fcf_valid, fcf_record),
+			bf_get(lpfc_fcf_record_fcf_sol, fcf_record),
 			fcf_record->fip_priority,
 			bf_get(lpfc_fcf_record_mac_addr_prov, fcf_record),
 			vlan_id,
@@ -2185,12 +2188,14 @@
 					       new_fcf_record));
 		lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
 				"2781 FCF (x%x) failed connection "
-				"list check: (x%x/x%x)\n",
+				"list check: (x%x/x%x/%x)\n",
 				bf_get(lpfc_fcf_record_fcf_index,
 				       new_fcf_record),
 				bf_get(lpfc_fcf_record_fcf_avail,
 				       new_fcf_record),
 				bf_get(lpfc_fcf_record_fcf_valid,
+				       new_fcf_record),
+				bf_get(lpfc_fcf_record_fcf_sol,
 				       new_fcf_record));
 		if ((phba->fcf.fcf_flag & FCF_IN_USE) &&
 		    lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec,
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 834b699..2cdeb54 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -1305,6 +1305,11 @@
 #define lpfc_mbx_mq_create_ext_async_evt_link_SHIFT	LPFC_TRAILER_CODE_LINK
 #define lpfc_mbx_mq_create_ext_async_evt_link_MASK	0x00000001
 #define lpfc_mbx_mq_create_ext_async_evt_link_WORD	async_evt_bmap
+#define LPFC_EVT_CODE_LINK_NO_LINK	0x0
+#define LPFC_EVT_CODE_LINK_10_MBIT	0x1
+#define LPFC_EVT_CODE_LINK_100_MBIT	0x2
+#define LPFC_EVT_CODE_LINK_1_GBIT	0x3
+#define LPFC_EVT_CODE_LINK_10_GBIT	0x4
 #define lpfc_mbx_mq_create_ext_async_evt_fip_SHIFT	LPFC_TRAILER_CODE_FCOE
 #define lpfc_mbx_mq_create_ext_async_evt_fip_MASK	0x00000001
 #define lpfc_mbx_mq_create_ext_async_evt_fip_WORD	async_evt_bmap
@@ -1314,6 +1319,13 @@
 #define lpfc_mbx_mq_create_ext_async_evt_fc_SHIFT	LPFC_TRAILER_CODE_FC
 #define lpfc_mbx_mq_create_ext_async_evt_fc_MASK	0x00000001
 #define lpfc_mbx_mq_create_ext_async_evt_fc_WORD	async_evt_bmap
+#define LPFC_EVT_CODE_FC_NO_LINK	0x0
+#define LPFC_EVT_CODE_FC_1_GBAUD	0x1
+#define LPFC_EVT_CODE_FC_2_GBAUD	0x2
+#define LPFC_EVT_CODE_FC_4_GBAUD	0x4
+#define LPFC_EVT_CODE_FC_8_GBAUD	0x8
+#define LPFC_EVT_CODE_FC_10_GBAUD	0xA
+#define LPFC_EVT_CODE_FC_16_GBAUD	0x10
 #define lpfc_mbx_mq_create_ext_async_evt_sli_SHIFT	LPFC_TRAILER_CODE_SLI
 #define lpfc_mbx_mq_create_ext_async_evt_sli_MASK	0x00000001
 #define lpfc_mbx_mq_create_ext_async_evt_sli_WORD	async_evt_bmap
@@ -1695,8 +1707,14 @@
 #define lpfc_fcf_record_fc_map_2_MASK		0x000000FF
 #define lpfc_fcf_record_fc_map_2_WORD		word7
 #define lpfc_fcf_record_fcf_valid_SHIFT		24
-#define lpfc_fcf_record_fcf_valid_MASK		0x000000FF
+#define lpfc_fcf_record_fcf_valid_MASK		0x00000001
 #define lpfc_fcf_record_fcf_valid_WORD		word7
+#define lpfc_fcf_record_fcf_fc_SHIFT		25
+#define lpfc_fcf_record_fcf_fc_MASK		0x00000001
+#define lpfc_fcf_record_fcf_fc_WORD		word7
+#define lpfc_fcf_record_fcf_sol_SHIFT		31
+#define lpfc_fcf_record_fcf_sol_MASK		0x00000001
+#define lpfc_fcf_record_fcf_sol_WORD		word7
 	uint32_t word8;
 #define lpfc_fcf_record_fcf_index_SHIFT		0
 #define lpfc_fcf_record_fcf_index_MASK		0x0000FFFF
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 8a55a58..7dc4218 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1892,8 +1892,10 @@
 		max_speed = 4;
 	else if (phba->lmt & LMT_2Gb)
 		max_speed = 2;
-	else
+	else if (phba->lmt & LMT_1Gb)
 		max_speed = 1;
+	else
+		max_speed = 0;
 
 	vp = &phba->vpd;
 
@@ -2078,9 +2080,13 @@
 	if (descp && descp[0] == '\0') {
 		if (oneConnect)
 			snprintf(descp, 255,
-				"Emulex OneConnect %s, %s Initiator, Port %s",
+				"Emulex OneConnect %s, %s Initiator %s",
 				m.name, m.function,
 				phba->Port);
+		else if (max_speed == 0)
+			snprintf(descp, 255,
+				"Emulex %s %s %s ",
+				m.name, m.bus, m.function);
 		else
 			snprintf(descp, 255,
 				"Emulex %s %d%s %s %s",
@@ -3502,6 +3508,119 @@
 }
 
 /**
+ * lpfc_sli_port_speed_get - Get sli3 link speed code to link speed
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to get an SLI3 FC port's link speed in Mbps.
+ *
+ * Return: link speed in terms of Mbps.
+ **/
+uint32_t
+lpfc_sli_port_speed_get(struct lpfc_hba *phba)
+{
+	uint32_t link_speed;
+
+	if (!lpfc_is_link_up(phba))
+		return 0;
+
+	switch (phba->fc_linkspeed) {
+	case LPFC_LINK_SPEED_1GHZ:
+		link_speed = 1000;
+		break;
+	case LPFC_LINK_SPEED_2GHZ:
+		link_speed = 2000;
+		break;
+	case LPFC_LINK_SPEED_4GHZ:
+		link_speed = 4000;
+		break;
+	case LPFC_LINK_SPEED_8GHZ:
+		link_speed = 8000;
+		break;
+	case LPFC_LINK_SPEED_10GHZ:
+		link_speed = 10000;
+		break;
+	case LPFC_LINK_SPEED_16GHZ:
+		link_speed = 16000;
+		break;
+	default:
+		link_speed = 0;
+	}
+	return link_speed;
+}
+
+/**
+ * lpfc_sli4_port_speed_parse - Parse async evt link speed code to link speed
+ * @phba: pointer to lpfc hba data structure.
+ * @evt_code: asynchronous event code.
+ * @speed_code: asynchronous event link speed code.
+ *
+ * This routine is to parse the giving SLI4 async event link speed code into
+ * value of Mbps for the link speed.
+ *
+ * Return: link speed in terms of Mbps.
+ **/
+static uint32_t
+lpfc_sli4_port_speed_parse(struct lpfc_hba *phba, uint32_t evt_code,
+			   uint8_t speed_code)
+{
+	uint32_t port_speed;
+
+	switch (evt_code) {
+	case LPFC_TRAILER_CODE_LINK:
+		switch (speed_code) {
+		case LPFC_EVT_CODE_LINK_NO_LINK:
+			port_speed = 0;
+			break;
+		case LPFC_EVT_CODE_LINK_10_MBIT:
+			port_speed = 10;
+			break;
+		case LPFC_EVT_CODE_LINK_100_MBIT:
+			port_speed = 100;
+			break;
+		case LPFC_EVT_CODE_LINK_1_GBIT:
+			port_speed = 1000;
+			break;
+		case LPFC_EVT_CODE_LINK_10_GBIT:
+			port_speed = 10000;
+			break;
+		default:
+			port_speed = 0;
+		}
+		break;
+	case LPFC_TRAILER_CODE_FC:
+		switch (speed_code) {
+		case LPFC_EVT_CODE_FC_NO_LINK:
+			port_speed = 0;
+			break;
+		case LPFC_EVT_CODE_FC_1_GBAUD:
+			port_speed = 1000;
+			break;
+		case LPFC_EVT_CODE_FC_2_GBAUD:
+			port_speed = 2000;
+			break;
+		case LPFC_EVT_CODE_FC_4_GBAUD:
+			port_speed = 4000;
+			break;
+		case LPFC_EVT_CODE_FC_8_GBAUD:
+			port_speed = 8000;
+			break;
+		case LPFC_EVT_CODE_FC_10_GBAUD:
+			port_speed = 10000;
+			break;
+		case LPFC_EVT_CODE_FC_16_GBAUD:
+			port_speed = 16000;
+			break;
+		default:
+			port_speed = 0;
+		}
+		break;
+	default:
+		port_speed = 0;
+	}
+	return port_speed;
+}
+
+/**
  * lpfc_sli4_async_link_evt - Process the asynchronous FCoE link event
  * @phba: pointer to lpfc hba data structure.
  * @acqe_link: pointer to the async link completion queue entry.
@@ -3558,7 +3677,8 @@
 
 	/* Keep the link status for extra SLI4 state machine reference */
 	phba->sli4_hba.link_state.speed =
-				bf_get(lpfc_acqe_link_speed, acqe_link);
+			lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_LINK,
+				bf_get(lpfc_acqe_link_speed, acqe_link));
 	phba->sli4_hba.link_state.duplex =
 				bf_get(lpfc_acqe_link_duplex, acqe_link);
 	phba->sli4_hba.link_state.status =
@@ -3570,7 +3690,8 @@
 	phba->sli4_hba.link_state.fault =
 				bf_get(lpfc_acqe_link_fault, acqe_link);
 	phba->sli4_hba.link_state.logical_speed =
-			bf_get(lpfc_acqe_logical_link_speed, acqe_link);
+			bf_get(lpfc_acqe_logical_link_speed, acqe_link) * 10;
+
 	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
 			"2900 Async FC/FCoE Link event - Speed:%dGBit "
 			"duplex:x%x LA Type:x%x Port Type:%d Port Number:%d "
@@ -3580,7 +3701,7 @@
 			phba->sli4_hba.link_state.status,
 			phba->sli4_hba.link_state.type,
 			phba->sli4_hba.link_state.number,
-			phba->sli4_hba.link_state.logical_speed * 10,
+			phba->sli4_hba.link_state.logical_speed,
 			phba->sli4_hba.link_state.fault);
 	/*
 	 * For FC Mode: issue the READ_TOPOLOGY mailbox command to fetch
@@ -3652,7 +3773,8 @@
 	}
 	/* Keep the link status for extra SLI4 state machine reference */
 	phba->sli4_hba.link_state.speed =
-				bf_get(lpfc_acqe_fc_la_speed, acqe_fc);
+			lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_FC,
+				bf_get(lpfc_acqe_fc_la_speed, acqe_fc));
 	phba->sli4_hba.link_state.duplex = LPFC_ASYNC_LINK_DUPLEX_FULL;
 	phba->sli4_hba.link_state.topology =
 				bf_get(lpfc_acqe_fc_la_topology, acqe_fc);
@@ -3665,7 +3787,7 @@
 	phba->sli4_hba.link_state.fault =
 				bf_get(lpfc_acqe_link_fault, acqe_fc);
 	phba->sli4_hba.link_state.logical_speed =
-				bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc);
+				bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc) * 10;
 	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
 			"2896 Async FC event - Speed:%dGBaud Topology:x%x "
 			"LA Type:x%x Port Type:%d Port Number:%d Logical speed:"
@@ -3675,7 +3797,7 @@
 			phba->sli4_hba.link_state.status,
 			phba->sli4_hba.link_state.type,
 			phba->sli4_hba.link_state.number,
-			phba->sli4_hba.link_state.logical_speed * 10,
+			phba->sli4_hba.link_state.logical_speed,
 			phba->sli4_hba.link_state.fault);
 	pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!pmb) {
@@ -3783,14 +3905,18 @@
 	case LPFC_SLI_EVENT_STATUS_VALID:
 		return; /* no message if the sfp is okay */
 	case LPFC_SLI_EVENT_STATUS_NOT_PRESENT:
-		sprintf(message, "Not installed");
+		sprintf(message, "Optics faulted/incorrectly installed/not " \
+				"installed - Reseat optics, if issue not "
+				"resolved, replace.");
 		break;
 	case LPFC_SLI_EVENT_STATUS_WRONG_TYPE:
 		sprintf(message,
-			"Optics of two types installed");
+			"Optics of two types installed - Remove one optic or " \
+			"install matching pair of optics.");
 		break;
 	case LPFC_SLI_EVENT_STATUS_UNSUPPORTED:
-		sprintf(message, "Incompatible optics");
+		sprintf(message, "Incompatible optics - Replace with " \
+				"compatible optics for card to function.");
 		break;
 	default:
 		/* firmware is reporting a status we don't know about */
@@ -4161,11 +4287,11 @@
 	phba->fcoe_eventtag = acqe_grp5->event_tag;
 	prev_ll_spd = phba->sli4_hba.link_state.logical_speed;
 	phba->sli4_hba.link_state.logical_speed =
-		(bf_get(lpfc_acqe_grp5_llink_spd, acqe_grp5));
+		(bf_get(lpfc_acqe_grp5_llink_spd, acqe_grp5)) * 10;
 	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
 			"2789 GRP5 Async Event: Updating logical link speed "
-			"from %dMbps to %dMbps\n", (prev_ll_spd * 10),
-			(phba->sli4_hba.link_state.logical_speed*10));
+			"from %dMbps to %dMbps\n", prev_ll_spd,
+			phba->sli4_hba.link_state.logical_speed);
 }
 
 /**
@@ -4947,7 +5073,7 @@
 	}
 
 	phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
-				      phba->sli4_hba.cfg_eqn), GFP_KERNEL);
+				      phba->cfg_fcp_io_channel), GFP_KERNEL);
 	if (!phba->sli4_hba.msix_entries) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"2573 Failed allocate memory for msi-x "
@@ -6559,7 +6685,8 @@
 		i++;
 	}
 	if (i < cfg_fcp_io_channel) {
-		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+		lpfc_printf_log(phba,
+				KERN_ERR, LOG_INIT,
 				"3188 Reducing IO channels to match number of "
 				"CPUs: from %d to %d\n", cfg_fcp_io_channel, i);
 		cfg_fcp_io_channel = i;
@@ -6567,8 +6694,8 @@
 
 	if (cfg_fcp_io_channel >
 	    phba->sli4_hba.max_cfg_param.max_eq) {
-		cfg_fcp_io_channel = phba->sli4_hba.max_cfg_param.max_eq;
-		if (cfg_fcp_io_channel < LPFC_FCP_IO_CHAN_MIN) {
+		if (phba->sli4_hba.max_cfg_param.max_eq <
+		    LPFC_FCP_IO_CHAN_MIN) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 					"2574 Not enough EQs (%d) from the "
 					"pci function for supporting FCP "
@@ -6577,13 +6704,12 @@
 					phba->cfg_fcp_io_channel);
 			goto out_error;
 		}
-		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
-				"2575 Not enough EQs (%d) from the pci "
-				"function for supporting the requested "
-				"FCP EQs (%d), the actual FCP EQs can "
-				"be supported: %d\n",
-				phba->sli4_hba.max_cfg_param.max_eq,
-				phba->cfg_fcp_io_channel, cfg_fcp_io_channel);
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2575 Reducing IO channels to match number of "
+				"available EQs: from %d to %d\n",
+				cfg_fcp_io_channel,
+				phba->sli4_hba.max_cfg_param.max_eq);
+		cfg_fcp_io_channel = phba->sli4_hba.max_cfg_param.max_eq;
 	}
 
 	/* Eventually cfg_fcp_eq_count / cfg_fcp_wq_count will be depricated */
@@ -6592,7 +6718,6 @@
 	phba->cfg_fcp_eq_count = cfg_fcp_io_channel;
 	phba->cfg_fcp_wq_count = cfg_fcp_io_channel;
 	phba->cfg_fcp_io_channel = cfg_fcp_io_channel;
-	phba->sli4_hba.cfg_eqn = cfg_fcp_io_channel;
 
 	/* Get EQ depth from module parameter, fake the default for now */
 	phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
@@ -8095,11 +8220,11 @@
 	int vectors, rc, index;
 
 	/* Set up MSI-X multi-message vectors */
-	for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
+	for (index = 0; index < phba->cfg_fcp_io_channel; index++)
 		phba->sli4_hba.msix_entries[index].entry = index;
 
 	/* Configure MSI-X capability structure */
-	vectors = phba->sli4_hba.cfg_eqn;
+	vectors = phba->cfg_fcp_io_channel;
 enable_msix_vectors:
 	rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
 			     vectors);
@@ -8142,8 +8267,14 @@
 			goto cfg_fail_out;
 		}
 	}
-	phba->sli4_hba.msix_vec_nr = vectors;
 
+	if (vectors != phba->cfg_fcp_io_channel) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"3238 Reducing IO channels to match number of "
+				"MSI-X vectors, requested %d got %d\n",
+				phba->cfg_fcp_io_channel, vectors);
+		phba->cfg_fcp_io_channel = vectors;
+	}
 	return rc;
 
 cfg_fail_out:
@@ -8171,7 +8302,7 @@
 	int index;
 
 	/* Free up MSI-X multi-message vectors */
-	for (index = 0; index < phba->sli4_hba.msix_vec_nr; index++)
+	for (index = 0; index < phba->cfg_fcp_io_channel; index++)
 		free_irq(phba->sli4_hba.msix_entries[index].vector,
 			 &phba->sli4_hba.fcp_eq_hdl[index]);
 
@@ -9304,23 +9435,28 @@
 
 /**
  * lpfc_write_firmware - attempt to write a firmware image to the port
- * @phba: pointer to lpfc hba data structure.
  * @fw: pointer to firmware image returned from request_firmware.
+ * @phba: pointer to lpfc hba data structure.
  *
- * returns the number of bytes written if write is successful.
- * returns a negative error value if there were errors.
- * returns 0 if firmware matches currently active firmware on port.
  **/
-int
-lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
+static void
+lpfc_write_firmware(const struct firmware *fw, void *context)
 {
+	struct lpfc_hba *phba = (struct lpfc_hba *)context;
 	char fwrev[FW_REV_STR_SIZE];
-	struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data;
+	struct lpfc_grp_hdr *image;
 	struct list_head dma_buffer_list;
 	int i, rc = 0;
 	struct lpfc_dmabuf *dmabuf, *next;
 	uint32_t offset = 0, temp_offset = 0;
 
+	/* It can be null, sanity check */
+	if (!fw) {
+		rc = -ENXIO;
+		goto out;
+	}
+	image = (struct lpfc_grp_hdr *)fw->data;
+
 	INIT_LIST_HEAD(&dma_buffer_list);
 	if ((be32_to_cpu(image->magic_number) != LPFC_GROUP_OJECT_MAGIC_NUM) ||
 	    (bf_get_be32(lpfc_grp_hdr_file_type, image) !=
@@ -9333,12 +9469,13 @@
 				be32_to_cpu(image->magic_number),
 				bf_get_be32(lpfc_grp_hdr_file_type, image),
 				bf_get_be32(lpfc_grp_hdr_id, image));
-		return -EINVAL;
+		rc = -EINVAL;
+		goto release_out;
 	}
 	lpfc_decode_firmware_rev(phba, fwrev, 1);
 	if (strncmp(fwrev, image->revision, strnlen(image->revision, 16))) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"3023 Updating Firmware. Current Version:%s "
+				"3023 Updating Firmware, Current Version:%s "
 				"New Version:%s\n",
 				fwrev, image->revision);
 		for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) {
@@ -9346,7 +9483,7 @@
 					 GFP_KERNEL);
 			if (!dmabuf) {
 				rc = -ENOMEM;
-				goto out;
+				goto release_out;
 			}
 			dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
 							  SLI4_PAGE_SIZE,
@@ -9355,7 +9492,7 @@
 			if (!dmabuf->virt) {
 				kfree(dmabuf);
 				rc = -ENOMEM;
-				goto out;
+				goto release_out;
 			}
 			list_add_tail(&dmabuf->list, &dma_buffer_list);
 		}
@@ -9375,23 +9512,24 @@
 			}
 			rc = lpfc_wr_object(phba, &dma_buffer_list,
 				    (fw->size - offset), &offset);
-			if (rc) {
-				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-						"3024 Firmware update failed. "
-						"%d\n", rc);
-				goto out;
-			}
+			if (rc)
+				goto release_out;
 		}
 		rc = offset;
 	}
-out:
+
+release_out:
 	list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) {
 		list_del(&dmabuf->list);
 		dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE,
 				  dmabuf->virt, dmabuf->phys);
 		kfree(dmabuf);
 	}
-	return rc;
+	release_firmware(fw);
+out:
+	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+			"3024 Firmware update done: %d.", rc);
+	return;
 }
 
 /**
@@ -9418,12 +9556,11 @@
 	struct lpfc_hba   *phba;
 	struct lpfc_vport *vport = NULL;
 	struct Scsi_Host  *shost = NULL;
-	int error;
+	int error, ret;
 	uint32_t cfg_mode, intr_mode;
 	int mcnt;
 	int adjusted_fcp_io_channel;
-	const struct firmware *fw;
-	uint8_t file_name[16];
+	uint8_t file_name[ELX_MODEL_NAME_SIZE];
 
 	/* Allocate memory for HBA structure */
 	phba = lpfc_hba_alloc(pdev);
@@ -9525,9 +9662,6 @@
 		/* Default to single EQ for non-MSI-X */
 		if (phba->intr_type != MSIX)
 			adjusted_fcp_io_channel = 1;
-		else if (phba->sli4_hba.msix_vec_nr <
-					phba->cfg_fcp_io_channel)
-			adjusted_fcp_io_channel = phba->sli4_hba.msix_vec_nr;
 		else
 			adjusted_fcp_io_channel = phba->cfg_fcp_io_channel;
 		phba->cfg_fcp_io_channel = adjusted_fcp_io_channel;
@@ -9572,12 +9706,12 @@
 	/* check for firmware upgrade or downgrade (if_type 2 only) */
 	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
 	    LPFC_SLI_INTF_IF_TYPE_2) {
-		snprintf(file_name, 16, "%s.grp", phba->ModelName);
-		error = request_firmware(&fw, file_name, &phba->pcidev->dev);
-		if (!error) {
-			lpfc_write_firmware(phba, fw);
-			release_firmware(fw);
-		}
+		snprintf(file_name, ELX_MODEL_NAME_SIZE, "%s.grp",
+			 phba->ModelName);
+		ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG,
+					file_name, &phba->pcidev->dev,
+					GFP_KERNEL, (void *)phba,
+					lpfc_write_firmware);
 	}
 
 	/* Check if there are static vports to be created. */
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 64013f3..7f45ac9 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -3829,9 +3829,9 @@
 	cmd->scsi_done(cmd);
 
 	if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
-		spin_lock_irq(&phba->hbalock);
+		spin_lock_irqsave(&phba->hbalock, flags);
 		lpfc_cmd->pCmd = NULL;
-		spin_unlock_irq(&phba->hbalock);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
 
 		/*
 		 * If there is a thread waiting for command completion
@@ -3871,9 +3871,9 @@
 		}
 	}
 
-	spin_lock_irq(&phba->hbalock);
+	spin_lock_irqsave(&phba->hbalock, flags);
 	lpfc_cmd->pCmd = NULL;
-	spin_unlock_irq(&phba->hbalock);
+	spin_unlock_irqrestore(&phba->hbalock, flags);
 
 	/*
 	 * If there is a thread waiting for command completion
@@ -4163,7 +4163,7 @@
 {
 	struct lpfc_vport *vport = (struct lpfc_vport *) host->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
-	int len;
+	int len, link_speed = 0;
 	static char  lpfcinfobuf[384];
 
 	memset(lpfcinfobuf,0,384);
@@ -4184,12 +4184,18 @@
 				 phba->Port);
 		}
 		len = strlen(lpfcinfobuf);
-		if (phba->sli4_hba.link_state.logical_speed) {
-			snprintf(lpfcinfobuf + len,
-				 384-len,
-				 " Logical Link Speed: %d Mbps",
-				 phba->sli4_hba.link_state.logical_speed * 10);
+		if (phba->sli_rev <= LPFC_SLI_REV3) {
+			link_speed = lpfc_sli_port_speed_get(phba);
+		} else {
+			if (phba->sli4_hba.link_state.logical_speed)
+				link_speed =
+				      phba->sli4_hba.link_state.logical_speed;
+			else
+				link_speed = phba->sli4_hba.link_state.speed;
 		}
+		if (link_speed != 0)
+			snprintf(lpfcinfobuf + len, 384-len,
+				 " Logical Link Speed: %d Mbps", link_speed);
 	}
 	return lpfcinfobuf;
 }
@@ -4398,16 +4404,17 @@
 	struct lpfc_scsi_buf *lpfc_cmd;
 	IOCB_t *cmd, *icmd;
 	int ret = SUCCESS, status = 0;
+	unsigned long flags;
 	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
 
 	status = fc_block_scsi_eh(cmnd);
 	if (status != 0 && status != SUCCESS)
 		return status;
 
-	spin_lock_irq(&phba->hbalock);
+	spin_lock_irqsave(&phba->hbalock, flags);
 	/* driver queued commands are in process of being flushed */
 	if (phba->hba_flag & HBA_FCP_IOQ_FLUSH) {
-		spin_unlock_irq(&phba->hbalock);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
 			"3168 SCSI Layer abort requested I/O has been "
 			"flushed by LLD.\n");
@@ -4416,7 +4423,7 @@
 
 	lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
 	if (!lpfc_cmd || !lpfc_cmd->pCmd) {
-		spin_unlock_irq(&phba->hbalock);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
 			 "2873 SCSI Layer I/O Abort Request IO CMPL Status "
 			 "x%x ID %d LUN %d\n",
@@ -4427,7 +4434,7 @@
 	iocb = &lpfc_cmd->cur_iocbq;
 	/* the command is in process of being cancelled */
 	if (!(iocb->iocb_flag & LPFC_IO_ON_TXCMPLQ)) {
-		spin_unlock_irq(&phba->hbalock);
+		spin_unlock_irqrestore(&phba->hbalock, flags);
 		lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
 			"3169 SCSI Layer abort requested I/O has been "
 			"cancelled by LLD.\n");
@@ -4484,7 +4491,7 @@
 	abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
 	abtsiocb->vport = vport;
 	/* no longer need the lock after this point */
-	spin_unlock_irq(&phba->hbalock);
+	spin_unlock_irqrestore(&phba->hbalock, flags);
 
 	if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) ==
 	    IOCB_ERROR) {
@@ -4516,7 +4523,7 @@
 	goto out;
 
 out_unlock:
-	spin_unlock_irq(&phba->hbalock);
+	spin_unlock_irqrestore(&phba->hbalock, flags);
 out:
 	lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
 			 "0749 SCSI Layer I/O Abort Request Status x%x ID %d "
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 219bf53..d7f3313 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -3964,9 +3964,9 @@
 	pci_write_config_word(phba->pcidev, PCI_COMMAND, (cfg_value &
 			      ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
 
-	/* Perform FCoE PCI function reset */
-	lpfc_sli4_queue_destroy(phba);
+	/* Perform FCoE PCI function reset before freeing queue memory */
 	rc = lpfc_pci_function_reset(phba);
+	lpfc_sli4_queue_destroy(phba);
 
 	/* Restore PCI cmd register */
 	pci_write_config_word(phba->pcidev, PCI_COMMAND, cfg_value);
@@ -7072,6 +7072,40 @@
 }
 
 /**
+ * lpfc_sli4_wait_bmbx_ready - Wait for bootstrap mailbox register ready
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * The function waits for the bootstrap mailbox register ready bit from
+ * port for twice the regular mailbox command timeout value.
+ *
+ *      0 - no timeout on waiting for bootstrap mailbox register ready.
+ *      MBXERR_ERROR - wait for bootstrap mailbox register timed out.
+ **/
+static int
+lpfc_sli4_wait_bmbx_ready(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	uint32_t db_ready;
+	unsigned long timeout;
+	struct lpfc_register bmbx_reg;
+
+	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
+				   * 1000) + jiffies;
+
+	do {
+		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+		db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+		if (!db_ready)
+			msleep(2);
+
+		if (time_after(jiffies, timeout))
+			return MBXERR_ERROR;
+	} while (!db_ready);
+
+	return 0;
+}
+
+/**
  * lpfc_sli4_post_sync_mbox - Post an SLI4 mailbox to the bootstrap mailbox
  * @phba: Pointer to HBA context object.
  * @mboxq: Pointer to mailbox object.
@@ -7092,15 +7126,12 @@
 {
 	int rc = MBX_SUCCESS;
 	unsigned long iflag;
-	uint32_t db_ready;
 	uint32_t mcqe_status;
 	uint32_t mbx_cmnd;
-	unsigned long timeout;
 	struct lpfc_sli *psli = &phba->sli;
 	struct lpfc_mqe *mb = &mboxq->u.mqe;
 	struct lpfc_bmbx_create *mbox_rgn;
 	struct dma_address *dma_address;
-	struct lpfc_register bmbx_reg;
 
 	/*
 	 * Only one mailbox can be active to the bootstrap mailbox region
@@ -7124,6 +7155,11 @@
 	phba->sli.mbox_active = mboxq;
 	spin_unlock_irqrestore(&phba->hbalock, iflag);
 
+	/* wait for bootstrap mbox register for readyness */
+	rc = lpfc_sli4_wait_bmbx_ready(phba, mboxq);
+	if (rc)
+		goto exit;
+
 	/*
 	 * Initialize the bootstrap memory region to avoid stale data areas
 	 * in the mailbox post.  Then copy the caller's mailbox contents to
@@ -7138,35 +7174,18 @@
 	dma_address = &phba->sli4_hba.bmbx.dma_address;
 	writel(dma_address->addr_hi, phba->sli4_hba.BMBXregaddr);
 
-	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
-				   * 1000) + jiffies;
-	do {
-		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
-		db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
-		if (!db_ready)
-			msleep(2);
-
-		if (time_after(jiffies, timeout)) {
-			rc = MBXERR_ERROR;
-			goto exit;
-		}
-	} while (!db_ready);
+	/* wait for bootstrap mbox register for hi-address write done */
+	rc = lpfc_sli4_wait_bmbx_ready(phba, mboxq);
+	if (rc)
+		goto exit;
 
 	/* Post the low mailbox dma address to the port. */
 	writel(dma_address->addr_lo, phba->sli4_hba.BMBXregaddr);
-	timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mboxq)
-				   * 1000) + jiffies;
-	do {
-		bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
-		db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
-		if (!db_ready)
-			msleep(2);
 
-		if (time_after(jiffies, timeout)) {
-			rc = MBXERR_ERROR;
-			goto exit;
-		}
-	} while (!db_ready);
+	/* wait for bootstrap mbox register for low address write done */
+	rc = lpfc_sli4_wait_bmbx_ready(phba, mboxq);
+	if (rc)
+		goto exit;
 
 	/*
 	 * Read the CQ to ensure the mailbox has completed.
@@ -8090,6 +8109,8 @@
 		bf_set(wqe_lenloc, &wqe->fcp_icmd.wqe_com,
 		       LPFC_WQE_LENLOC_NONE);
 		bf_set(wqe_ebde_cnt, &wqe->fcp_icmd.wqe_com, 0);
+		bf_set(wqe_erp, &wqe->fcp_icmd.wqe_com,
+		       iocbq->iocb.ulpFCP2Rcvy);
 		break;
 	case CMD_GEN_REQUEST64_CR:
 		/* For this command calculate the xmit length of the
@@ -12099,6 +12120,7 @@
 	struct lpfc_queue *eq;
 	int cnt, rc, length, status = 0;
 	uint32_t shdr_status, shdr_add_status;
+	uint32_t result;
 	int fcp_eqidx;
 	union lpfc_sli4_cfg_shdr *shdr;
 	uint16_t dmult;
@@ -12117,8 +12139,11 @@
 	eq_delay = &mbox->u.mqe.un.eq_delay;
 
 	/* Calculate delay multiper from maximum interrupt per second */
-	dmult = phba->cfg_fcp_imax / phba->cfg_fcp_io_channel;
-	dmult = LPFC_DMULT_CONST/dmult - 1;
+	result = phba->cfg_fcp_imax / phba->cfg_fcp_io_channel;
+	if (result > LPFC_DMULT_CONST)
+		dmult = 0;
+	else
+		dmult = LPFC_DMULT_CONST/result - 1;
 
 	cnt = 0;
 	for (fcp_eqidx = startq; fcp_eqidx < phba->cfg_fcp_io_channel;
@@ -12174,7 +12199,7 @@
  * fails this function will return -ENXIO.
  **/
 uint32_t
-lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax)
+lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint32_t imax)
 {
 	struct lpfc_mbx_eq_create *eq_create;
 	LPFC_MBOXQ_t *mbox;
@@ -12206,7 +12231,10 @@
 	       LPFC_EQE_SIZE);
 	bf_set(lpfc_eq_context_valid, &eq_create->u.request.context, 1);
 	/* Calculate delay multiper from maximum interrupt per second */
-	dmult = LPFC_DMULT_CONST/imax - 1;
+	if (imax > LPFC_DMULT_CONST)
+		dmult = 0;
+	else
+		dmult = LPFC_DMULT_CONST/imax - 1;
 	bf_set(lpfc_eq_context_delay_multi, &eq_create->u.request.context,
 	       dmult);
 	switch (eq->entry_count) {
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index bd4bc43..f44a06a 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -37,7 +37,7 @@
 /* Multi-queue arrangement for FCP EQ/CQ/WQ tuples */
 #define LPFC_FCP_IO_CHAN_DEF       4
 #define LPFC_FCP_IO_CHAN_MIN       1
-#define LPFC_FCP_IO_CHAN_MAX       8
+#define LPFC_FCP_IO_CHAN_MAX       16
 
 /*
  * Provide the default FCF Record attributes used by the driver
@@ -168,7 +168,7 @@
 };
 
 struct lpfc_sli4_link {
-	uint8_t speed;
+	uint16_t speed;
 	uint8_t duplex;
 	uint8_t status;
 	uint8_t type;
@@ -490,8 +490,6 @@
 	struct lpfc_pc_sli4_params pc_sli4_params;
 	struct msix_entry *msix_entries;
 	uint8_t handler_name[LPFC_FCP_IO_CHAN_MAX][LPFC_SLI4_HANDLER_NAME_SZ];
-	uint32_t cfg_eqn;
-	uint32_t msix_vec_nr;
 	struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */
 
 	/* Pointers to the constructed SLI4 queues */
@@ -626,7 +624,7 @@
 struct lpfc_queue *lpfc_sli4_queue_alloc(struct lpfc_hba *, uint32_t,
 			uint32_t);
 void lpfc_sli4_queue_free(struct lpfc_queue *);
-uint32_t lpfc_eq_create(struct lpfc_hba *, struct lpfc_queue *, uint16_t);
+uint32_t lpfc_eq_create(struct lpfc_hba *, struct lpfc_queue *, uint32_t);
 uint32_t lpfc_modify_fcp_eq_delay(struct lpfc_hba *, uint16_t);
 uint32_t lpfc_cq_create(struct lpfc_hba *, struct lpfc_queue *,
 			struct lpfc_queue *, uint32_t, uint32_t);
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 04265a1..0c21491 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.34"
+#define LPFC_DRIVER_VERSION "8.3.35"
 #define LPFC_DRIVER_NAME		"lpfc"
 
 /* Used for SLI 2/3 */
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index fcb005f..16b7a72 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -1,7 +1,7 @@
 /*
  *  Linux MegaRAID driver for SAS based RAID controllers
  *
- *  Copyright (c) 2009-2011  LSI Corporation.
+ *  Copyright (c) 2003-2012  LSI Corporation.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -33,9 +33,9 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION				"00.00.06.18-rc1"
-#define MEGASAS_RELDATE				"Jun. 17, 2012"
-#define MEGASAS_EXT_VERSION			"Tue. Jun. 17 17:00:00 PDT 2012"
+#define MEGASAS_VERSION				"06.504.01.00-rc1"
+#define MEGASAS_RELDATE				"Oct. 1, 2012"
+#define MEGASAS_EXT_VERSION			"Mon. Oct. 1 17:00:00 PDT 2012"
 
 /*
  * Device IDs
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 0393ec4..d2c5366 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -1,7 +1,7 @@
 /*
  *  Linux MegaRAID driver for SAS based RAID controllers
  *
- *  Copyright (c) 2009-2011  LSI Corporation.
+ *  Copyright (c) 2003-2012  LSI Corporation.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -18,7 +18,7 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  *  FILE: megaraid_sas_base.c
- *  Version : v00.00.06.18-rc1
+ *  Version : v06.504.01.00-rc1
  *
  *  Authors: LSI Corporation
  *           Sreenivas Bagalkote
@@ -71,6 +71,10 @@
 module_param(msix_disable, int, S_IRUGO);
 MODULE_PARM_DESC(msix_disable, "Disable MSI-X interrupt handling. Default: 0");
 
+static unsigned int msix_vectors;
+module_param(msix_vectors, int, S_IRUGO);
+MODULE_PARM_DESC(msix_vectors, "MSI-X max vector count. Default: Set by FW");
+
 static int throttlequeuedepth = MEGASAS_THROTTLE_QUEUE_DEPTH;
 module_param(throttlequeuedepth, int, S_IRUGO);
 MODULE_PARM_DESC(throttlequeuedepth,
@@ -3520,6 +3524,10 @@
 			instance->msix_vectors = (readl(&instance->reg_set->
 							outbound_scratch_pad_2
 							  ) & 0x1F) + 1;
+			if (msix_vectors)
+				instance->msix_vectors =
+					min(msix_vectors,
+					    instance->msix_vectors);
 		} else
 			instance->msix_vectors = 1;
 		/* Don't bother allocating more MSI-X vectors than cpus */
@@ -5233,7 +5241,6 @@
 
 		case MR_EVT_PD_REMOVED:
 			if (megasas_get_pd_list(instance) == 0) {
-			megasas_get_pd_list(instance);
 			for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
 				for (j = 0;
 				j < MEGASAS_MAX_DEV_PER_CHANNEL;
diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c
index e3d251a..a11df82 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fp.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fp.c
@@ -1,7 +1,7 @@
 /*
  *  Linux MegaRAID driver for SAS based RAID controllers
  *
- *  Copyright (c) 2009-2011  LSI Corporation.
+ *  Copyright (c) 2009-2012  LSI Corporation.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index ddf094e..74030af 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -1,7 +1,7 @@
 /*
  *  Linux MegaRAID driver for SAS based RAID controllers
  *
- *  Copyright (c) 2009-2011  LSI Corporation.
+ *  Copyright (c) 2009-2012  LSI Corporation.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -1184,8 +1184,6 @@
 		io_request->CDB.EEDP32.PrimaryReferenceTag =
 			cpu_to_be32(ref_tag);
 		io_request->CDB.EEDP32.PrimaryApplicationTagMask = 0xffff;
-
-		io_request->DataLength = num_blocks * 512;
 		io_request->IoFlags = 32; /* Specify 32-byte cdb */
 
 		/* Transfer length */
@@ -1329,7 +1327,7 @@
 			  struct megasas_cmd_fusion *cmd)
 {
 	u8 fp_possible;
-	u32 start_lba_lo, start_lba_hi, device_id;
+	u32 start_lba_lo, start_lba_hi, device_id, datalength = 0;
 	struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
 	union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
 	struct IO_REQUEST_INFO io_info;
@@ -1355,7 +1353,7 @@
 	 * 6-byte READ(0x08) or WRITE(0x0A) cdb
 	 */
 	if (scp->cmd_len == 6) {
-		io_request->DataLength = (u32) scp->cmnd[4];
+		datalength = (u32) scp->cmnd[4];
 		start_lba_lo = ((u32) scp->cmnd[1] << 16) |
 			((u32) scp->cmnd[2] << 8) | (u32) scp->cmnd[3];
 
@@ -1366,7 +1364,7 @@
 	 * 10-byte READ(0x28) or WRITE(0x2A) cdb
 	 */
 	else if (scp->cmd_len == 10) {
-		io_request->DataLength = (u32) scp->cmnd[8] |
+		datalength = (u32) scp->cmnd[8] |
 			((u32) scp->cmnd[7] << 8);
 		start_lba_lo = ((u32) scp->cmnd[2] << 24) |
 			((u32) scp->cmnd[3] << 16) |
@@ -1377,7 +1375,7 @@
 	 * 12-byte READ(0xA8) or WRITE(0xAA) cdb
 	 */
 	else if (scp->cmd_len == 12) {
-		io_request->DataLength = ((u32) scp->cmnd[6] << 24) |
+		datalength = ((u32) scp->cmnd[6] << 24) |
 			((u32) scp->cmnd[7] << 16) |
 			((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
 		start_lba_lo = ((u32) scp->cmnd[2] << 24) |
@@ -1389,7 +1387,7 @@
 	 * 16-byte READ(0x88) or WRITE(0x8A) cdb
 	 */
 	else if (scp->cmd_len == 16) {
-		io_request->DataLength = ((u32) scp->cmnd[10] << 24) |
+		datalength = ((u32) scp->cmnd[10] << 24) |
 			((u32) scp->cmnd[11] << 16) |
 			((u32) scp->cmnd[12] << 8) | (u32) scp->cmnd[13];
 		start_lba_lo = ((u32) scp->cmnd[6] << 24) |
@@ -1403,8 +1401,9 @@
 
 	memset(&io_info, 0, sizeof(struct IO_REQUEST_INFO));
 	io_info.ldStartBlock = ((u64)start_lba_hi << 32) | start_lba_lo;
-	io_info.numBlocks = io_request->DataLength;
+	io_info.numBlocks = datalength;
 	io_info.ldTgtId = device_id;
+	io_request->DataLength = scsi_bufflen(scp);
 
 	if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
 		io_info.isRead = 1;
@@ -1431,7 +1430,6 @@
 	if (fp_possible) {
 		megasas_set_pd_lba(io_request, scp->cmd_len, &io_info, scp,
 				   local_map_ptr, start_lba_lo);
-		io_request->DataLength = scsi_bufflen(scp);
 		io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
 		cmd->request_desc->SCSIIO.RequestFlags =
 			(MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY
@@ -1510,7 +1508,8 @@
 	local_map_ptr = fusion->ld_map[(instance->map_id & 1)];
 
 	/* Check if this is a system PD I/O */
-	if (instance->pd_list[pd_index].driveState == MR_PD_STATE_SYSTEM) {
+	if (scmd->device->channel < MEGASAS_MAX_PD_CHANNELS &&
+	    instance->pd_list[pd_index].driveState == MR_PD_STATE_SYSTEM) {
 		io_request->Function = 0;
 		io_request->DevHandle =
 			local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
@@ -1525,6 +1524,8 @@
 		cmd->request_desc->SCSIIO.RequestFlags =
 			(MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY <<
 			 MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+		cmd->request_desc->SCSIIO.DevHandle =
+			local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
 	} else {
 		io_request->Function  = MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST;
 		io_request->DevHandle = device_id;
@@ -1732,8 +1733,6 @@
 	if (reply_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
 		return IRQ_NONE;
 
-	d_val.word = desc->Words;
-
 	num_completed = 0;
 
 	while ((d_val.u.low != UINT_MAX) && (d_val.u.high != UINT_MAX)) {
@@ -1855,10 +1854,8 @@
 	}
 	spin_unlock_irqrestore(&instance->hba_lock, flags);
 
-	spin_lock_irqsave(&instance->completion_lock, flags);
 	for (MSIxIndex = 0 ; MSIxIndex < count; MSIxIndex++)
 		complete_cmd_fusion(instance, MSIxIndex);
-	spin_unlock_irqrestore(&instance->completion_lock, flags);
 }
 
 /**
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h
index 088c9f9..a7c64f0 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.h
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h
@@ -1,7 +1,7 @@
 /*
  *  Linux MegaRAID driver for SAS based RAID controllers
  *
- *  Copyright (c) 2009-2011  LSI Corporation.
+ *  Copyright (c) 2009-2012  LSI Corporation.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
diff --git a/drivers/scsi/mvumi.c b/drivers/scsi/mvumi.c
index 783edc7..c585a92 100644
--- a/drivers/scsi/mvumi.c
+++ b/drivers/scsi/mvumi.c
@@ -35,10 +35,12 @@
 #include <linux/io.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport.h>
 #include <scsi/scsi_eh.h>
 #include <linux/uaccess.h>
+#include <linux/kthread.h>
 
 #include "mvumi.h"
 
@@ -48,6 +50,7 @@
 
 static DEFINE_PCI_DEVICE_TABLE(mvumi_pci_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_2, PCI_DEVICE_ID_MARVELL_MV9143) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_2, PCI_DEVICE_ID_MARVELL_MV9580) },
 	{ 0 }
 };
 
@@ -118,7 +121,7 @@
 static struct mvumi_res *mvumi_alloc_mem_resource(struct mvumi_hba *mhba,
 				enum resource_type type, unsigned int size)
 {
-	struct mvumi_res *res = kzalloc(sizeof(*res), GFP_KERNEL);
+	struct mvumi_res *res = kzalloc(sizeof(*res), GFP_ATOMIC);
 
 	if (!res) {
 		dev_err(&mhba->pdev->dev,
@@ -128,7 +131,7 @@
 
 	switch (type) {
 	case RESOURCE_CACHED_MEMORY:
-		res->virt_addr = kzalloc(size, GFP_KERNEL);
+		res->virt_addr = kzalloc(size, GFP_ATOMIC);
 		if (!res->virt_addr) {
 			dev_err(&mhba->pdev->dev,
 				"unable to allocate memory,size = %d.\n", size);
@@ -222,11 +225,11 @@
 			m_sg->baseaddr_l = cpu_to_le32(lower_32_bits(busaddr));
 			m_sg->baseaddr_h = cpu_to_le32(upper_32_bits(busaddr));
 			m_sg->flags = 0;
-			m_sg->size = cpu_to_le32(sg_dma_len(&sg[i]));
+			sgd_setsz(mhba, m_sg, cpu_to_le32(sg_dma_len(&sg[i])));
 			if ((i + 1) == *sg_count)
-				m_sg->flags |= SGD_EOT;
+				m_sg->flags |= 1U << mhba->eot_flag;
 
-			m_sg++;
+			sgd_inc(mhba, m_sg);
 		}
 	} else {
 		scmd->SCp.dma_handle = scsi_bufflen(scmd) ?
@@ -237,8 +240,8 @@
 		busaddr = scmd->SCp.dma_handle;
 		m_sg->baseaddr_l = cpu_to_le32(lower_32_bits(busaddr));
 		m_sg->baseaddr_h = cpu_to_le32(upper_32_bits(busaddr));
-		m_sg->flags = SGD_EOT;
-		m_sg->size = cpu_to_le32(scsi_bufflen(scmd));
+		m_sg->flags = 1U << mhba->eot_flag;
+		sgd_setsz(mhba, m_sg, cpu_to_le32(scsi_bufflen(scmd)));
 		*sg_count = 1;
 	}
 
@@ -267,8 +270,8 @@
 
 	m_sg->baseaddr_l = cpu_to_le32(lower_32_bits(phy_addr));
 	m_sg->baseaddr_h = cpu_to_le32(upper_32_bits(phy_addr));
-	m_sg->flags = SGD_EOT;
-	m_sg->size = cpu_to_le32(size);
+	m_sg->flags = 1U << mhba->eot_flag;
+	sgd_setsz(mhba, m_sg, cpu_to_le32(size));
 
 	return 0;
 }
@@ -285,7 +288,8 @@
 	}
 	INIT_LIST_HEAD(&cmd->queue_pointer);
 
-	cmd->frame = kzalloc(mhba->ib_max_size, GFP_KERNEL);
+	cmd->frame = pci_alloc_consistent(mhba->pdev,
+				mhba->ib_max_size, &cmd->frame_phys);
 	if (!cmd->frame) {
 		dev_err(&mhba->pdev->dev, "failed to allocate memory for FW"
 			" frame,size = %d.\n", mhba->ib_max_size);
@@ -297,7 +301,8 @@
 		if (mvumi_internal_cmd_sgl(mhba, cmd, buf_size)) {
 			dev_err(&mhba->pdev->dev, "failed to allocate memory"
 						" for internal frame\n");
-			kfree(cmd->frame);
+			pci_free_consistent(mhba->pdev, mhba->ib_max_size,
+					cmd->frame, cmd->frame_phys);
 			kfree(cmd);
 			return NULL;
 		}
@@ -317,7 +322,7 @@
 	if (cmd && cmd->frame) {
 		if (cmd->frame->sg_counts) {
 			m_sg = (struct mvumi_sgl *) &cmd->frame->payload[0];
-			size = m_sg->size;
+			sgd_getsz(mhba, m_sg, size);
 
 			phy_addr = (dma_addr_t) m_sg->baseaddr_l |
 				(dma_addr_t) ((m_sg->baseaddr_h << 16) << 16);
@@ -325,7 +330,8 @@
 			pci_free_consistent(mhba->pdev, size, cmd->data_buf,
 								phy_addr);
 		}
-		kfree(cmd->frame);
+		pci_free_consistent(mhba->pdev, mhba->ib_max_size,
+				cmd->frame, cmd->frame_phys);
 		kfree(cmd);
 	}
 }
@@ -374,7 +380,8 @@
 		cmd = list_first_entry(&mhba->cmd_pool, struct mvumi_cmd,
 							queue_pointer);
 		list_del(&cmd->queue_pointer);
-		kfree(cmd->frame);
+		if (!(mhba->hba_capability & HS_CAPABILITY_SUPPORT_DYN_SRC))
+			kfree(cmd->frame);
 		kfree(cmd);
 	}
 }
@@ -396,7 +403,12 @@
 
 		INIT_LIST_HEAD(&cmd->queue_pointer);
 		list_add_tail(&cmd->queue_pointer, &mhba->cmd_pool);
-		cmd->frame = kzalloc(mhba->ib_max_size, GFP_KERNEL);
+		if (mhba->hba_capability & HS_CAPABILITY_SUPPORT_DYN_SRC) {
+			cmd->frame = mhba->ib_frame + i * mhba->ib_max_size;
+			cmd->frame_phys = mhba->ib_frame_phys
+						+ i * mhba->ib_max_size;
+		} else
+			cmd->frame = kzalloc(mhba->ib_max_size, GFP_KERNEL);
 		if (!cmd->frame)
 			goto err_exit;
 	}
@@ -409,48 +421,71 @@
 		cmd = list_first_entry(&mhba->cmd_pool, struct mvumi_cmd,
 						queue_pointer);
 		list_del(&cmd->queue_pointer);
-		kfree(cmd->frame);
+		if (!(mhba->hba_capability & HS_CAPABILITY_SUPPORT_DYN_SRC))
+			kfree(cmd->frame);
 		kfree(cmd);
 	}
 	return -ENOMEM;
 }
 
-static int mvumi_get_ib_list_entry(struct mvumi_hba *mhba, void **ib_entry)
+static unsigned int mvumi_check_ib_list_9143(struct mvumi_hba *mhba)
 {
-	unsigned int ib_rp_reg, cur_ib_entry;
+	unsigned int ib_rp_reg;
+	struct mvumi_hw_regs *regs = mhba->regs;
 
+	ib_rp_reg = ioread32(mhba->regs->inb_read_pointer);
+
+	if (unlikely(((ib_rp_reg & regs->cl_slot_num_mask) ==
+			(mhba->ib_cur_slot & regs->cl_slot_num_mask)) &&
+			((ib_rp_reg & regs->cl_pointer_toggle)
+			 != (mhba->ib_cur_slot & regs->cl_pointer_toggle)))) {
+		dev_warn(&mhba->pdev->dev, "no free slot to use.\n");
+		return 0;
+	}
 	if (atomic_read(&mhba->fw_outstanding) >= mhba->max_io) {
 		dev_warn(&mhba->pdev->dev, "firmware io overflow.\n");
-		return -1;
+		return 0;
+	} else {
+		return mhba->max_io - atomic_read(&mhba->fw_outstanding);
 	}
-	ib_rp_reg = ioread32(mhba->mmio + CLA_INB_READ_POINTER);
+}
 
-	if (unlikely(((ib_rp_reg & CL_SLOT_NUM_MASK) ==
-			(mhba->ib_cur_slot & CL_SLOT_NUM_MASK)) &&
-			((ib_rp_reg & CL_POINTER_TOGGLE) !=
-			(mhba->ib_cur_slot & CL_POINTER_TOGGLE)))) {
-		dev_warn(&mhba->pdev->dev, "no free slot to use.\n");
-		return -1;
-	}
+static unsigned int mvumi_check_ib_list_9580(struct mvumi_hba *mhba)
+{
+	unsigned int count;
+	if (atomic_read(&mhba->fw_outstanding) >= (mhba->max_io - 1))
+		return 0;
+	count = ioread32(mhba->ib_shadow);
+	if (count == 0xffff)
+		return 0;
+	return count;
+}
 
-	cur_ib_entry = mhba->ib_cur_slot & CL_SLOT_NUM_MASK;
+static void mvumi_get_ib_list_entry(struct mvumi_hba *mhba, void **ib_entry)
+{
+	unsigned int cur_ib_entry;
+
+	cur_ib_entry = mhba->ib_cur_slot & mhba->regs->cl_slot_num_mask;
 	cur_ib_entry++;
 	if (cur_ib_entry >= mhba->list_num_io) {
 		cur_ib_entry -= mhba->list_num_io;
-		mhba->ib_cur_slot ^= CL_POINTER_TOGGLE;
+		mhba->ib_cur_slot ^= mhba->regs->cl_pointer_toggle;
 	}
-	mhba->ib_cur_slot &= ~CL_SLOT_NUM_MASK;
-	mhba->ib_cur_slot |= (cur_ib_entry & CL_SLOT_NUM_MASK);
-	*ib_entry = mhba->ib_list + cur_ib_entry * mhba->ib_max_size;
+	mhba->ib_cur_slot &= ~mhba->regs->cl_slot_num_mask;
+	mhba->ib_cur_slot |= (cur_ib_entry & mhba->regs->cl_slot_num_mask);
+	if (mhba->hba_capability & HS_CAPABILITY_SUPPORT_DYN_SRC) {
+		*ib_entry = mhba->ib_list + cur_ib_entry *
+				sizeof(struct mvumi_dyn_list_entry);
+	} else {
+		*ib_entry = mhba->ib_list + cur_ib_entry * mhba->ib_max_size;
+	}
 	atomic_inc(&mhba->fw_outstanding);
-
-	return 0;
 }
 
 static void mvumi_send_ib_list_entry(struct mvumi_hba *mhba)
 {
-	iowrite32(0xfff, mhba->ib_shadow);
-	iowrite32(mhba->ib_cur_slot, mhba->mmio + CLA_INB_WRITE_POINTER);
+	iowrite32(0xffff, mhba->ib_shadow);
+	iowrite32(mhba->ib_cur_slot, mhba->regs->inb_write_pointer);
 }
 
 static char mvumi_check_ob_frame(struct mvumi_hba *mhba,
@@ -480,31 +515,59 @@
 	return 0;
 }
 
+static int mvumi_check_ob_list_9143(struct mvumi_hba *mhba,
+			unsigned int *cur_obf, unsigned int *assign_obf_end)
+{
+	unsigned int ob_write, ob_write_shadow;
+	struct mvumi_hw_regs *regs = mhba->regs;
+
+	do {
+		ob_write = ioread32(regs->outb_copy_pointer);
+		ob_write_shadow = ioread32(mhba->ob_shadow);
+	} while ((ob_write & regs->cl_slot_num_mask) != ob_write_shadow);
+
+	*cur_obf = mhba->ob_cur_slot & mhba->regs->cl_slot_num_mask;
+	*assign_obf_end = ob_write & mhba->regs->cl_slot_num_mask;
+
+	if ((ob_write & regs->cl_pointer_toggle) !=
+			(mhba->ob_cur_slot & regs->cl_pointer_toggle)) {
+		*assign_obf_end += mhba->list_num_io;
+	}
+	return 0;
+}
+
+static int mvumi_check_ob_list_9580(struct mvumi_hba *mhba,
+			unsigned int *cur_obf, unsigned int *assign_obf_end)
+{
+	unsigned int ob_write;
+	struct mvumi_hw_regs *regs = mhba->regs;
+
+	ob_write = ioread32(regs->outb_read_pointer);
+	ob_write = ioread32(regs->outb_copy_pointer);
+	*cur_obf = mhba->ob_cur_slot & mhba->regs->cl_slot_num_mask;
+	*assign_obf_end = ob_write & mhba->regs->cl_slot_num_mask;
+	if (*assign_obf_end < *cur_obf)
+		*assign_obf_end += mhba->list_num_io;
+	else if (*assign_obf_end == *cur_obf)
+		return -1;
+	return 0;
+}
+
 static void mvumi_receive_ob_list_entry(struct mvumi_hba *mhba)
 {
-	unsigned int ob_write_reg, ob_write_shadow_reg;
 	unsigned int cur_obf, assign_obf_end, i;
 	struct mvumi_ob_data *ob_data;
 	struct mvumi_rsp_frame *p_outb_frame;
+	struct mvumi_hw_regs *regs = mhba->regs;
 
-	do {
-		ob_write_reg = ioread32(mhba->mmio + CLA_OUTB_COPY_POINTER);
-		ob_write_shadow_reg = ioread32(mhba->ob_shadow);
-	} while ((ob_write_reg & CL_SLOT_NUM_MASK) != ob_write_shadow_reg);
-
-	cur_obf = mhba->ob_cur_slot & CL_SLOT_NUM_MASK;
-	assign_obf_end = ob_write_reg & CL_SLOT_NUM_MASK;
-
-	if ((ob_write_reg & CL_POINTER_TOGGLE) !=
-				(mhba->ob_cur_slot & CL_POINTER_TOGGLE)) {
-		assign_obf_end += mhba->list_num_io;
-	}
+	if (mhba->instancet->check_ob_list(mhba, &cur_obf, &assign_obf_end))
+		return;
 
 	for (i = (assign_obf_end - cur_obf); i != 0; i--) {
 		cur_obf++;
 		if (cur_obf >= mhba->list_num_io) {
 			cur_obf -= mhba->list_num_io;
-			mhba->ob_cur_slot ^= CL_POINTER_TOGGLE;
+			mhba->ob_cur_slot ^= regs->cl_pointer_toggle;
 		}
 
 		p_outb_frame = mhba->ob_list + cur_obf * mhba->ob_max_size;
@@ -528,7 +591,7 @@
 			ob_data = NULL;
 			if (cur_obf == 0) {
 				cur_obf = mhba->list_num_io - 1;
-				mhba->ob_cur_slot ^= CL_POINTER_TOGGLE;
+				mhba->ob_cur_slot ^= regs->cl_pointer_toggle;
 			} else
 				cur_obf -= 1;
 			break;
@@ -539,18 +602,20 @@
 
 		list_add_tail(&ob_data->list, &mhba->free_ob_list);
 	}
-	mhba->ob_cur_slot &= ~CL_SLOT_NUM_MASK;
-	mhba->ob_cur_slot |= (cur_obf & CL_SLOT_NUM_MASK);
-	iowrite32(mhba->ob_cur_slot, mhba->mmio + CLA_OUTB_READ_POINTER);
+	mhba->ob_cur_slot &= ~regs->cl_slot_num_mask;
+	mhba->ob_cur_slot |= (cur_obf & regs->cl_slot_num_mask);
+	iowrite32(mhba->ob_cur_slot, regs->outb_read_pointer);
 }
 
-static void mvumi_reset(void *regs)
+static void mvumi_reset(struct mvumi_hba *mhba)
 {
-	iowrite32(0, regs + CPU_ENPOINTA_MASK_REG);
-	if (ioread32(regs + CPU_ARM_TO_PCIEA_MSG1) != HANDSHAKE_DONESTATE)
+	struct mvumi_hw_regs *regs = mhba->regs;
+
+	iowrite32(0, regs->enpointa_mask_reg);
+	if (ioread32(regs->arm_to_pciea_msg1) != HANDSHAKE_DONESTATE)
 		return;
 
-	iowrite32(DRBL_SOFT_RESET, regs + CPU_PCIEA_TO_ARM_DRBL_REG);
+	iowrite32(DRBL_SOFT_RESET, regs->pciea_to_arm_drbl_reg);
 }
 
 static unsigned char mvumi_start(struct mvumi_hba *mhba);
@@ -558,7 +623,7 @@
 static int mvumi_wait_for_outstanding(struct mvumi_hba *mhba)
 {
 	mhba->fw_state = FW_STATE_ABORT;
-	mvumi_reset(mhba->mmio);
+	mvumi_reset(mhba);
 
 	if (mvumi_start(mhba))
 		return FAILED;
@@ -566,6 +631,98 @@
 		return SUCCESS;
 }
 
+static int mvumi_wait_for_fw(struct mvumi_hba *mhba)
+{
+	struct mvumi_hw_regs *regs = mhba->regs;
+	u32 tmp;
+	unsigned long before;
+	before = jiffies;
+
+	iowrite32(0, regs->enpointa_mask_reg);
+	tmp = ioread32(regs->arm_to_pciea_msg1);
+	while (tmp != HANDSHAKE_READYSTATE) {
+		iowrite32(DRBL_MU_RESET, regs->pciea_to_arm_drbl_reg);
+		if (time_after(jiffies, before + FW_MAX_DELAY * HZ)) {
+			dev_err(&mhba->pdev->dev,
+				"FW reset failed [0x%x].\n", tmp);
+			return FAILED;
+		}
+
+		msleep(500);
+		rmb();
+		tmp = ioread32(regs->arm_to_pciea_msg1);
+	}
+
+	return SUCCESS;
+}
+
+static void mvumi_backup_bar_addr(struct mvumi_hba *mhba)
+{
+	unsigned char i;
+
+	for (i = 0; i < MAX_BASE_ADDRESS; i++) {
+		pci_read_config_dword(mhba->pdev, 0x10 + i * 4,
+						&mhba->pci_base[i]);
+	}
+}
+
+static void mvumi_restore_bar_addr(struct mvumi_hba *mhba)
+{
+	unsigned char i;
+
+	for (i = 0; i < MAX_BASE_ADDRESS; i++) {
+		if (mhba->pci_base[i])
+			pci_write_config_dword(mhba->pdev, 0x10 + i * 4,
+						mhba->pci_base[i]);
+	}
+}
+
+static unsigned int mvumi_pci_set_master(struct pci_dev *pdev)
+{
+	unsigned int ret = 0;
+	pci_set_master(pdev);
+
+	if (IS_DMA64) {
+		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
+			ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	} else
+		ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+
+	return ret;
+}
+
+static int mvumi_reset_host_9580(struct mvumi_hba *mhba)
+{
+	mhba->fw_state = FW_STATE_ABORT;
+
+	iowrite32(0, mhba->regs->reset_enable);
+	iowrite32(0xf, mhba->regs->reset_request);
+
+	iowrite32(0x10, mhba->regs->reset_enable);
+	iowrite32(0x10, mhba->regs->reset_request);
+	msleep(100);
+	pci_disable_device(mhba->pdev);
+
+	if (pci_enable_device(mhba->pdev)) {
+		dev_err(&mhba->pdev->dev, "enable device failed\n");
+		return FAILED;
+	}
+	if (mvumi_pci_set_master(mhba->pdev)) {
+		dev_err(&mhba->pdev->dev, "set master failed\n");
+		return FAILED;
+	}
+	mvumi_restore_bar_addr(mhba);
+	if (mvumi_wait_for_fw(mhba) == FAILED)
+		return FAILED;
+
+	return mvumi_wait_for_outstanding(mhba);
+}
+
+static int mvumi_reset_host_9143(struct mvumi_hba *mhba)
+{
+	return mvumi_wait_for_outstanding(mhba);
+}
+
 static int mvumi_host_reset(struct scsi_cmnd *scmd)
 {
 	struct mvumi_hba *mhba;
@@ -575,7 +732,7 @@
 	scmd_printk(KERN_NOTICE, scmd, "RESET -%ld cmd=%x retries=%x\n",
 			scmd->serial_number, scmd->cmnd[0], scmd->retries);
 
-	return mvumi_wait_for_outstanding(mhba);
+	return mhba->instancet->reset_host(mhba);
 }
 
 static int mvumi_issue_blocked_cmd(struct mvumi_hba *mhba,
@@ -628,7 +785,9 @@
 	mvumi_free_cmds(mhba);
 	mvumi_release_mem_resource(mhba);
 	mvumi_unmap_pci_addr(mhba->pdev, mhba->base_addr);
-	kfree(mhba->handshake_page);
+	pci_free_consistent(mhba->pdev, HSP_MAX_SIZE,
+		mhba->handshake_page, mhba->handshake_page_phys);
+	kfree(mhba->regs);
 	pci_release_regions(mhba->pdev);
 }
 
@@ -665,6 +824,7 @@
 		frame->cdb_length = MAX_COMMAND_SIZE;
 		memset(frame->cdb, 0, MAX_COMMAND_SIZE);
 		frame->cdb[0] = SCSI_CMD_MARVELL_SPECIFIC;
+		frame->cdb[1] = CDB_CORE_MODULE;
 		frame->cdb[2] = CDB_CORE_SHUTDOWN;
 
 		mvumi_issue_blocked_cmd(mhba, cmd);
@@ -695,7 +855,7 @@
 	return ret;
 }
 
-void mvumi_hs_build_page(struct mvumi_hba *mhba,
+static void mvumi_hs_build_page(struct mvumi_hba *mhba,
 				struct mvumi_hs_header *hs_header)
 {
 	struct mvumi_hs_page2 *hs_page2;
@@ -710,6 +870,8 @@
 		hs_header->frame_length = sizeof(*hs_page2) - 4;
 		memset(hs_header->frame_content, 0, hs_header->frame_length);
 		hs_page2->host_type = 3; /* 3 mean linux*/
+		if (mhba->hba_capability & HS_CAPABILITY_SUPPORT_DYN_SRC)
+			hs_page2->host_cap = 0x08;/* host dynamic source mode */
 		hs_page2->host_ver.ver_major = VER_MAJOR;
 		hs_page2->host_ver.ver_minor = VER_MINOR;
 		hs_page2->host_ver.ver_oem = VER_OEM;
@@ -745,8 +907,18 @@
 		hs_page4->ob_baseaddr_h = upper_32_bits(mhba->ob_list_phys);
 		hs_page4->ib_entry_size = mhba->ib_max_size_setting;
 		hs_page4->ob_entry_size = mhba->ob_max_size_setting;
-		hs_page4->ob_depth = mhba->list_num_io;
-		hs_page4->ib_depth = mhba->list_num_io;
+		if (mhba->hba_capability
+			& HS_CAPABILITY_NEW_PAGE_IO_DEPTH_DEF) {
+			hs_page4->ob_depth = find_first_bit((unsigned long *)
+							    &mhba->list_num_io,
+							    BITS_PER_LONG);
+			hs_page4->ib_depth = find_first_bit((unsigned long *)
+							    &mhba->list_num_io,
+							    BITS_PER_LONG);
+		} else {
+			hs_page4->ob_depth = (u8) mhba->list_num_io;
+			hs_page4->ib_depth = (u8) mhba->list_num_io;
+		}
 		hs_header->checksum = mvumi_calculate_checksum(hs_header,
 						hs_header->frame_length);
 		break;
@@ -774,8 +946,11 @@
 		return 0;
 
 	tmp_size = mhba->ib_max_size * mhba->max_io;
+	if (mhba->hba_capability & HS_CAPABILITY_SUPPORT_DYN_SRC)
+		tmp_size += sizeof(struct mvumi_dyn_list_entry) * mhba->max_io;
+
 	tmp_size += 128 + mhba->ob_max_size * mhba->max_io;
-	tmp_size += 8 + sizeof(u32) + 16;
+	tmp_size += 8 + sizeof(u32)*2 + 16;
 
 	res_mgnt = mvumi_alloc_mem_resource(mhba,
 					RESOURCE_UNCACHED_MEMORY, tmp_size);
@@ -793,24 +968,41 @@
 	v += offset;
 	mhba->ib_list = v;
 	mhba->ib_list_phys = p;
+	if (mhba->hba_capability & HS_CAPABILITY_SUPPORT_DYN_SRC) {
+		v += sizeof(struct mvumi_dyn_list_entry) * mhba->max_io;
+		p += sizeof(struct mvumi_dyn_list_entry) * mhba->max_io;
+		mhba->ib_frame = v;
+		mhba->ib_frame_phys = p;
+	}
 	v += mhba->ib_max_size * mhba->max_io;
 	p += mhba->ib_max_size * mhba->max_io;
+
 	/* ib shadow */
 	offset = round_up(p, 8) - p;
 	p += offset;
 	v += offset;
 	mhba->ib_shadow = v;
 	mhba->ib_shadow_phys = p;
-	p += sizeof(u32);
-	v += sizeof(u32);
+	p += sizeof(u32)*2;
+	v += sizeof(u32)*2;
 	/* ob shadow */
-	offset = round_up(p, 8) - p;
-	p += offset;
-	v += offset;
-	mhba->ob_shadow = v;
-	mhba->ob_shadow_phys = p;
-	p += 8;
-	v += 8;
+	if (mhba->pdev->device == PCI_DEVICE_ID_MARVELL_MV9580) {
+		offset = round_up(p, 8) - p;
+		p += offset;
+		v += offset;
+		mhba->ob_shadow = v;
+		mhba->ob_shadow_phys = p;
+		p += 8;
+		v += 8;
+	} else {
+		offset = round_up(p, 4) - p;
+		p += offset;
+		v += offset;
+		mhba->ob_shadow = v;
+		mhba->ob_shadow_phys = p;
+		p += 4;
+		v += 4;
+	}
 
 	/* ob list */
 	offset = round_up(p, 128) - p;
@@ -902,6 +1094,12 @@
 		dev_dbg(&mhba->pdev->dev, "FW version:%d\n",
 						hs_page1->fw_ver.ver_build);
 
+		if (mhba->hba_capability & HS_CAPABILITY_SUPPORT_COMPACT_SG)
+			mhba->eot_flag = 22;
+		else
+			mhba->eot_flag = 27;
+		if (mhba->hba_capability & HS_CAPABILITY_NEW_PAGE_IO_DEPTH_DEF)
+			mhba->list_num_io = 1 << hs_page1->cl_inout_list_depth;
 		break;
 	default:
 		dev_err(&mhba->pdev->dev, "handshake: page code error\n");
@@ -923,12 +1121,12 @@
 {
 	unsigned int hs_state, tmp, hs_fun;
 	struct mvumi_hs_header *hs_header;
-	void *regs = mhba->mmio;
+	struct mvumi_hw_regs *regs = mhba->regs;
 
 	if (mhba->fw_state == FW_STATE_STARTING)
 		hs_state = HS_S_START;
 	else {
-		tmp = ioread32(regs + CPU_ARM_TO_PCIEA_MSG0);
+		tmp = ioread32(regs->arm_to_pciea_msg0);
 		hs_state = HS_GET_STATE(tmp);
 		dev_dbg(&mhba->pdev->dev, "handshake state[0x%x].\n", hs_state);
 		if (HS_GET_STATUS(tmp) != HS_STATUS_OK) {
@@ -943,21 +1141,20 @@
 		mhba->fw_state = FW_STATE_HANDSHAKING;
 		HS_SET_STATUS(hs_fun, HS_STATUS_OK);
 		HS_SET_STATE(hs_fun, HS_S_RESET);
-		iowrite32(HANDSHAKE_SIGNATURE, regs + CPU_PCIEA_TO_ARM_MSG1);
-		iowrite32(hs_fun, regs + CPU_PCIEA_TO_ARM_MSG0);
-		iowrite32(DRBL_HANDSHAKE, regs + CPU_PCIEA_TO_ARM_DRBL_REG);
+		iowrite32(HANDSHAKE_SIGNATURE, regs->pciea_to_arm_msg1);
+		iowrite32(hs_fun, regs->pciea_to_arm_msg0);
+		iowrite32(DRBL_HANDSHAKE, regs->pciea_to_arm_drbl_reg);
 		break;
 
 	case HS_S_RESET:
 		iowrite32(lower_32_bits(mhba->handshake_page_phys),
-					regs + CPU_PCIEA_TO_ARM_MSG1);
+					regs->pciea_to_arm_msg1);
 		iowrite32(upper_32_bits(mhba->handshake_page_phys),
-					regs + CPU_ARM_TO_PCIEA_MSG1);
+					regs->arm_to_pciea_msg1);
 		HS_SET_STATUS(hs_fun, HS_STATUS_OK);
 		HS_SET_STATE(hs_fun, HS_S_PAGE_ADDR);
-		iowrite32(hs_fun, regs + CPU_PCIEA_TO_ARM_MSG0);
-		iowrite32(DRBL_HANDSHAKE, regs + CPU_PCIEA_TO_ARM_DRBL_REG);
-
+		iowrite32(hs_fun, regs->pciea_to_arm_msg0);
+		iowrite32(DRBL_HANDSHAKE, regs->pciea_to_arm_drbl_reg);
 		break;
 
 	case HS_S_PAGE_ADDR:
@@ -997,30 +1194,37 @@
 			HS_SET_STATE(hs_fun, HS_S_END);
 
 		HS_SET_STATUS(hs_fun, HS_STATUS_OK);
-		iowrite32(hs_fun, regs + CPU_PCIEA_TO_ARM_MSG0);
-		iowrite32(DRBL_HANDSHAKE, regs + CPU_PCIEA_TO_ARM_DRBL_REG);
+		iowrite32(hs_fun, regs->pciea_to_arm_msg0);
+		iowrite32(DRBL_HANDSHAKE, regs->pciea_to_arm_drbl_reg);
 		break;
 
 	case HS_S_END:
 		/* Set communication list ISR */
-		tmp = ioread32(regs + CPU_ENPOINTA_MASK_REG);
-		tmp |= INT_MAP_COMAOUT | INT_MAP_COMAERR;
-		iowrite32(tmp, regs + CPU_ENPOINTA_MASK_REG);
+		tmp = ioread32(regs->enpointa_mask_reg);
+		tmp |= regs->int_comaout | regs->int_comaerr;
+		iowrite32(tmp, regs->enpointa_mask_reg);
 		iowrite32(mhba->list_num_io, mhba->ib_shadow);
 		/* Set InBound List Available count shadow */
 		iowrite32(lower_32_bits(mhba->ib_shadow_phys),
-					regs + CLA_INB_AVAL_COUNT_BASEL);
+					regs->inb_aval_count_basel);
 		iowrite32(upper_32_bits(mhba->ib_shadow_phys),
-					regs + CLA_INB_AVAL_COUNT_BASEH);
+					regs->inb_aval_count_baseh);
 
-		/* Set OutBound List Available count shadow */
-		iowrite32((mhba->list_num_io-1) | CL_POINTER_TOGGLE,
-						mhba->ob_shadow);
-		iowrite32(lower_32_bits(mhba->ob_shadow_phys), regs + 0x5B0);
-		iowrite32(upper_32_bits(mhba->ob_shadow_phys), regs + 0x5B4);
+		if (mhba->pdev->device == PCI_DEVICE_ID_MARVELL_MV9143) {
+			/* Set OutBound List Available count shadow */
+			iowrite32((mhba->list_num_io-1) |
+							regs->cl_pointer_toggle,
+							mhba->ob_shadow);
+			iowrite32(lower_32_bits(mhba->ob_shadow_phys),
+							regs->outb_copy_basel);
+			iowrite32(upper_32_bits(mhba->ob_shadow_phys),
+							regs->outb_copy_baseh);
+		}
 
-		mhba->ib_cur_slot = (mhba->list_num_io - 1) | CL_POINTER_TOGGLE;
-		mhba->ob_cur_slot = (mhba->list_num_io - 1) | CL_POINTER_TOGGLE;
+		mhba->ib_cur_slot = (mhba->list_num_io - 1) |
+							regs->cl_pointer_toggle;
+		mhba->ob_cur_slot = (mhba->list_num_io - 1) |
+							regs->cl_pointer_toggle;
 		mhba->fw_state = FW_STATE_STARTED;
 
 		break;
@@ -1040,7 +1244,7 @@
 	before = jiffies;
 	mvumi_handshake(mhba);
 	do {
-		isr_status = mhba->instancet->read_fw_status_reg(mhba->mmio);
+		isr_status = mhba->instancet->read_fw_status_reg(mhba);
 
 		if (mhba->fw_state == FW_STATE_STARTED)
 			return 0;
@@ -1062,16 +1266,15 @@
 
 static unsigned char mvumi_check_handshake(struct mvumi_hba *mhba)
 {
-	void *regs = mhba->mmio;
 	unsigned int tmp;
 	unsigned long before;
 
 	before = jiffies;
-	tmp = ioread32(regs + CPU_ARM_TO_PCIEA_MSG1);
+	tmp = ioread32(mhba->regs->arm_to_pciea_msg1);
 	while ((tmp != HANDSHAKE_READYSTATE) && (tmp != HANDSHAKE_DONESTATE)) {
 		if (tmp != HANDSHAKE_READYSTATE)
 			iowrite32(DRBL_MU_RESET,
-					regs + CPU_PCIEA_TO_ARM_DRBL_REG);
+					mhba->regs->pciea_to_arm_drbl_reg);
 		if (time_after(jiffies, before + FW_MAX_DELAY * HZ)) {
 			dev_err(&mhba->pdev->dev,
 				"invalid signature [0x%x].\n", tmp);
@@ -1079,7 +1282,7 @@
 		}
 		usleep_range(1000, 2000);
 		rmb();
-		tmp = ioread32(regs + CPU_ARM_TO_PCIEA_MSG1);
+		tmp = ioread32(mhba->regs->arm_to_pciea_msg1);
 	}
 
 	mhba->fw_state = FW_STATE_STARTING;
@@ -1100,15 +1303,17 @@
 
 static unsigned char mvumi_start(struct mvumi_hba *mhba)
 {
-	void *regs = mhba->mmio;
 	unsigned int tmp;
-	/* clear Door bell */
-	tmp = ioread32(regs + CPU_ARM_TO_PCIEA_DRBL_REG);
-	iowrite32(tmp, regs + CPU_ARM_TO_PCIEA_DRBL_REG);
+	struct mvumi_hw_regs *regs = mhba->regs;
 
-	iowrite32(0x3FFFFFFF, regs + CPU_ARM_TO_PCIEA_MASK_REG);
-	tmp = ioread32(regs + CPU_ENPOINTA_MASK_REG) | INT_MAP_DL_CPU2PCIEA;
-	iowrite32(tmp, regs + CPU_ENPOINTA_MASK_REG);
+	/* clear Door bell */
+	tmp = ioread32(regs->arm_to_pciea_drbl_reg);
+	iowrite32(tmp, regs->arm_to_pciea_drbl_reg);
+
+	iowrite32(regs->int_drbl_int_mask, regs->arm_to_pciea_mask_reg);
+	tmp = ioread32(regs->enpointa_mask_reg) | regs->int_dl_cpu2pciea;
+	iowrite32(tmp, regs->enpointa_mask_reg);
+	msleep(100);
 	if (mvumi_check_handshake(mhba))
 		return -1;
 
@@ -1166,6 +1371,7 @@
 	cmd->scmd->scsi_done(scmd);
 	mvumi_return_cmd(mhba, cmd);
 }
+
 static void mvumi_complete_internal_cmd(struct mvumi_hba *mhba,
 						struct mvumi_cmd *cmd,
 					struct mvumi_rsp_frame *ob_frame)
@@ -1210,6 +1416,304 @@
 	}
 }
 
+static int mvumi_handle_hotplug(struct mvumi_hba *mhba, u16 devid, int status)
+{
+	struct scsi_device *sdev;
+	int ret = -1;
+
+	if (status == DEVICE_OFFLINE) {
+		sdev = scsi_device_lookup(mhba->shost, 0, devid, 0);
+		if (sdev) {
+			dev_dbg(&mhba->pdev->dev, "remove disk %d-%d-%d.\n", 0,
+								sdev->id, 0);
+			scsi_remove_device(sdev);
+			scsi_device_put(sdev);
+			ret = 0;
+		} else
+			dev_err(&mhba->pdev->dev, " no disk[%d] to remove\n",
+									devid);
+	} else if (status == DEVICE_ONLINE) {
+		sdev = scsi_device_lookup(mhba->shost, 0, devid, 0);
+		if (!sdev) {
+			scsi_add_device(mhba->shost, 0, devid, 0);
+			dev_dbg(&mhba->pdev->dev, " add disk %d-%d-%d.\n", 0,
+								devid, 0);
+			ret = 0;
+		} else {
+			dev_err(&mhba->pdev->dev, " don't add disk %d-%d-%d.\n",
+								0, devid, 0);
+			scsi_device_put(sdev);
+		}
+	}
+	return ret;
+}
+
+static u64 mvumi_inquiry(struct mvumi_hba *mhba,
+	unsigned int id, struct mvumi_cmd *cmd)
+{
+	struct mvumi_msg_frame *frame;
+	u64 wwid = 0;
+	int cmd_alloc = 0;
+	int data_buf_len = 64;
+
+	if (!cmd) {
+		cmd = mvumi_create_internal_cmd(mhba, data_buf_len);
+		if (cmd)
+			cmd_alloc = 1;
+		else
+			return 0;
+	} else {
+		memset(cmd->data_buf, 0, data_buf_len);
+	}
+	cmd->scmd = NULL;
+	cmd->cmd_status = REQ_STATUS_PENDING;
+	atomic_set(&cmd->sync_cmd, 0);
+	frame = cmd->frame;
+	frame->device_id = (u16) id;
+	frame->cmd_flag = CMD_FLAG_DATA_IN;
+	frame->req_function = CL_FUN_SCSI_CMD;
+	frame->cdb_length = 6;
+	frame->data_transfer_length = MVUMI_INQUIRY_LENGTH;
+	memset(frame->cdb, 0, frame->cdb_length);
+	frame->cdb[0] = INQUIRY;
+	frame->cdb[4] = frame->data_transfer_length;
+
+	mvumi_issue_blocked_cmd(mhba, cmd);
+
+	if (cmd->cmd_status == SAM_STAT_GOOD) {
+		if (mhba->pdev->device == PCI_DEVICE_ID_MARVELL_MV9143)
+			wwid = id + 1;
+		else
+			memcpy((void *)&wwid,
+			       (cmd->data_buf + MVUMI_INQUIRY_UUID_OFF),
+			       MVUMI_INQUIRY_UUID_LEN);
+		dev_dbg(&mhba->pdev->dev,
+			"inquiry device(0:%d:0) wwid(%llx)\n", id, wwid);
+	} else {
+		wwid = 0;
+	}
+	if (cmd_alloc)
+		mvumi_delete_internal_cmd(mhba, cmd);
+
+	return wwid;
+}
+
+static void mvumi_detach_devices(struct mvumi_hba *mhba)
+{
+	struct mvumi_device *mv_dev = NULL , *dev_next;
+	struct scsi_device *sdev = NULL;
+
+	mutex_lock(&mhba->device_lock);
+
+	/* detach Hard Disk */
+	list_for_each_entry_safe(mv_dev, dev_next,
+		&mhba->shost_dev_list, list) {
+		mvumi_handle_hotplug(mhba, mv_dev->id, DEVICE_OFFLINE);
+		list_del_init(&mv_dev->list);
+		dev_dbg(&mhba->pdev->dev, "release device(0:%d:0) wwid(%llx)\n",
+			mv_dev->id, mv_dev->wwid);
+		kfree(mv_dev);
+	}
+	list_for_each_entry_safe(mv_dev, dev_next, &mhba->mhba_dev_list, list) {
+		list_del_init(&mv_dev->list);
+		dev_dbg(&mhba->pdev->dev, "release device(0:%d:0) wwid(%llx)\n",
+			mv_dev->id, mv_dev->wwid);
+		kfree(mv_dev);
+	}
+
+	/* detach virtual device */
+	if (mhba->pdev->device == PCI_DEVICE_ID_MARVELL_MV9580)
+		sdev = scsi_device_lookup(mhba->shost, 0,
+						mhba->max_target_id - 1, 0);
+
+	if (sdev) {
+		scsi_remove_device(sdev);
+		scsi_device_put(sdev);
+	}
+
+	mutex_unlock(&mhba->device_lock);
+}
+
+static void mvumi_rescan_devices(struct mvumi_hba *mhba, int id)
+{
+	struct scsi_device *sdev;
+
+	sdev = scsi_device_lookup(mhba->shost, 0, id, 0);
+	if (sdev) {
+		scsi_rescan_device(&sdev->sdev_gendev);
+		scsi_device_put(sdev);
+	}
+}
+
+static int mvumi_match_devices(struct mvumi_hba *mhba, int id, u64 wwid)
+{
+	struct mvumi_device *mv_dev = NULL;
+
+	list_for_each_entry(mv_dev, &mhba->shost_dev_list, list) {
+		if (mv_dev->wwid == wwid) {
+			if (mv_dev->id != id) {
+				dev_err(&mhba->pdev->dev,
+					"%s has same wwid[%llx] ,"
+					" but different id[%d %d]\n",
+					__func__, mv_dev->wwid, mv_dev->id, id);
+				return -1;
+			} else {
+				if (mhba->pdev->device ==
+						PCI_DEVICE_ID_MARVELL_MV9143)
+					mvumi_rescan_devices(mhba, id);
+				return 1;
+			}
+		}
+	}
+	return 0;
+}
+
+static void mvumi_remove_devices(struct mvumi_hba *mhba, int id)
+{
+	struct mvumi_device *mv_dev = NULL, *dev_next;
+
+	list_for_each_entry_safe(mv_dev, dev_next,
+				&mhba->shost_dev_list, list) {
+		if (mv_dev->id == id) {
+			dev_dbg(&mhba->pdev->dev,
+				"detach device(0:%d:0) wwid(%llx) from HOST\n",
+				mv_dev->id, mv_dev->wwid);
+			mvumi_handle_hotplug(mhba, mv_dev->id, DEVICE_OFFLINE);
+			list_del_init(&mv_dev->list);
+			kfree(mv_dev);
+		}
+	}
+}
+
+static int mvumi_probe_devices(struct mvumi_hba *mhba)
+{
+	int id, maxid;
+	u64 wwid = 0;
+	struct mvumi_device *mv_dev = NULL;
+	struct mvumi_cmd *cmd = NULL;
+	int found = 0;
+
+	cmd = mvumi_create_internal_cmd(mhba, 64);
+	if (!cmd)
+		return -1;
+
+	if (mhba->pdev->device == PCI_DEVICE_ID_MARVELL_MV9143)
+		maxid = mhba->max_target_id;
+	else
+		maxid = mhba->max_target_id - 1;
+
+	for (id = 0; id < maxid; id++) {
+		wwid = mvumi_inquiry(mhba, id, cmd);
+		if (!wwid) {
+			/* device no response, remove it */
+			mvumi_remove_devices(mhba, id);
+		} else {
+			/* device response, add it */
+			found = mvumi_match_devices(mhba, id, wwid);
+			if (!found) {
+				mvumi_remove_devices(mhba, id);
+				mv_dev = kzalloc(sizeof(struct mvumi_device),
+								GFP_KERNEL);
+				if (!mv_dev) {
+					dev_err(&mhba->pdev->dev,
+						"%s alloc mv_dev failed\n",
+						__func__);
+					continue;
+				}
+				mv_dev->id = id;
+				mv_dev->wwid = wwid;
+				mv_dev->sdev = NULL;
+				INIT_LIST_HEAD(&mv_dev->list);
+				list_add_tail(&mv_dev->list,
+					      &mhba->mhba_dev_list);
+				dev_dbg(&mhba->pdev->dev,
+					"probe a new device(0:%d:0)"
+					" wwid(%llx)\n", id, mv_dev->wwid);
+			} else if (found == -1)
+				return -1;
+			else
+				continue;
+		}
+	}
+
+	if (cmd)
+		mvumi_delete_internal_cmd(mhba, cmd);
+
+	return 0;
+}
+
+static int mvumi_rescan_bus(void *data)
+{
+	int ret = 0;
+	struct mvumi_hba *mhba = (struct mvumi_hba *) data;
+	struct mvumi_device *mv_dev = NULL , *dev_next;
+
+	while (!kthread_should_stop()) {
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (!atomic_read(&mhba->pnp_count))
+			schedule();
+		msleep(1000);
+		atomic_set(&mhba->pnp_count, 0);
+		__set_current_state(TASK_RUNNING);
+
+		mutex_lock(&mhba->device_lock);
+		ret = mvumi_probe_devices(mhba);
+		if (!ret) {
+			list_for_each_entry_safe(mv_dev, dev_next,
+						 &mhba->mhba_dev_list, list) {
+				if (mvumi_handle_hotplug(mhba, mv_dev->id,
+							 DEVICE_ONLINE)) {
+					dev_err(&mhba->pdev->dev,
+						"%s add device(0:%d:0) failed"
+						"wwid(%llx) has exist\n",
+						__func__,
+						mv_dev->id, mv_dev->wwid);
+					list_del_init(&mv_dev->list);
+					kfree(mv_dev);
+				} else {
+					list_move_tail(&mv_dev->list,
+						       &mhba->shost_dev_list);
+				}
+			}
+		}
+		mutex_unlock(&mhba->device_lock);
+	}
+	return 0;
+}
+
+static void mvumi_proc_msg(struct mvumi_hba *mhba,
+					struct mvumi_hotplug_event *param)
+{
+	u16 size = param->size;
+	const unsigned long *ar_bitmap;
+	const unsigned long *re_bitmap;
+	int index;
+
+	if (mhba->fw_flag & MVUMI_FW_ATTACH) {
+		index = -1;
+		ar_bitmap = (const unsigned long *) param->bitmap;
+		re_bitmap = (const unsigned long *) &param->bitmap[size >> 3];
+
+		mutex_lock(&mhba->sas_discovery_mutex);
+		do {
+			index = find_next_zero_bit(ar_bitmap, size, index + 1);
+			if (index >= size)
+				break;
+			mvumi_handle_hotplug(mhba, index, DEVICE_ONLINE);
+		} while (1);
+
+		index = -1;
+		do {
+			index = find_next_zero_bit(re_bitmap, size, index + 1);
+			if (index >= size)
+				break;
+			mvumi_handle_hotplug(mhba, index, DEVICE_OFFLINE);
+		} while (1);
+		mutex_unlock(&mhba->sas_discovery_mutex);
+	}
+}
+
 static void mvumi_notification(struct mvumi_hba *mhba, u8 msg, void *buffer)
 {
 	if (msg == APICDB1_EVENT_GETEVENT) {
@@ -1227,6 +1731,8 @@
 			param = &er->events[i];
 			mvumi_show_event(mhba, param);
 		}
+	} else if (msg == APICDB1_HOST_GETEVENT) {
+		mvumi_proc_msg(mhba, buffer);
 	}
 }
 
@@ -1271,17 +1777,27 @@
 	kfree(mu_ev);
 }
 
-static void mvumi_launch_events(struct mvumi_hba *mhba, u8 msg)
+static void mvumi_launch_events(struct mvumi_hba *mhba, u32 isr_status)
 {
 	struct mvumi_events_wq *mu_ev;
 
-	mu_ev = kzalloc(sizeof(*mu_ev), GFP_ATOMIC);
-	if (mu_ev) {
-		INIT_WORK(&mu_ev->work_q, mvumi_scan_events);
-		mu_ev->mhba = mhba;
-		mu_ev->event = msg;
-		mu_ev->param = NULL;
-		schedule_work(&mu_ev->work_q);
+	while (isr_status & (DRBL_BUS_CHANGE | DRBL_EVENT_NOTIFY)) {
+		if (isr_status & DRBL_BUS_CHANGE) {
+			atomic_inc(&mhba->pnp_count);
+			wake_up_process(mhba->dm_thread);
+			isr_status &= ~(DRBL_BUS_CHANGE);
+			continue;
+		}
+
+		mu_ev = kzalloc(sizeof(*mu_ev), GFP_ATOMIC);
+		if (mu_ev) {
+			INIT_WORK(&mu_ev->work_q, mvumi_scan_events);
+			mu_ev->mhba = mhba;
+			mu_ev->event = APICDB1_EVENT_GETEVENT;
+			isr_status &= ~(DRBL_EVENT_NOTIFY);
+			mu_ev->param = NULL;
+			schedule_work(&mu_ev->work_q);
+		}
 	}
 }
 
@@ -1322,16 +1838,17 @@
 		return IRQ_NONE;
 	}
 
-	if (mhba->global_isr & INT_MAP_DL_CPU2PCIEA) {
+	if (mhba->global_isr & mhba->regs->int_dl_cpu2pciea) {
+		if (mhba->isr_status & (DRBL_BUS_CHANGE | DRBL_EVENT_NOTIFY))
+			mvumi_launch_events(mhba, mhba->isr_status);
 		if (mhba->isr_status & DRBL_HANDSHAKE_ISR) {
 			dev_warn(&mhba->pdev->dev, "enter handshake again!\n");
 			mvumi_handshake(mhba);
 		}
-		if (mhba->isr_status & DRBL_EVENT_NOTIFY)
-			mvumi_launch_events(mhba, APICDB1_EVENT_GETEVENT);
+
 	}
 
-	if (mhba->global_isr & INT_MAP_COMAOUT)
+	if (mhba->global_isr & mhba->regs->int_comaout)
 		mvumi_receive_ob_list_entry(mhba);
 
 	mhba->global_isr = 0;
@@ -1358,8 +1875,7 @@
 		dev_dbg(&mhba->pdev->dev, "no free tag.\n");
 		return MV_QUEUE_COMMAND_RESULT_NO_RESOURCE;
 	}
-	if (mvumi_get_ib_list_entry(mhba, &ib_entry))
-		return MV_QUEUE_COMMAND_RESULT_NO_RESOURCE;
+	mvumi_get_ib_list_entry(mhba, &ib_entry);
 
 	cmd->frame->tag = tag_get_one(mhba, &mhba->tag_pool);
 	cmd->frame->request_id = mhba->io_seq++;
@@ -1367,21 +1883,35 @@
 	mhba->tag_cmd[cmd->frame->tag] = cmd;
 	frame_len = sizeof(*ib_frame) - 4 +
 				ib_frame->sg_counts * sizeof(struct mvumi_sgl);
-	memcpy(ib_entry, ib_frame, frame_len);
+	if (mhba->hba_capability & HS_CAPABILITY_SUPPORT_DYN_SRC) {
+		struct mvumi_dyn_list_entry *dle;
+		dle = ib_entry;
+		dle->src_low_addr =
+			cpu_to_le32(lower_32_bits(cmd->frame_phys));
+		dle->src_high_addr =
+			cpu_to_le32(upper_32_bits(cmd->frame_phys));
+		dle->if_length = (frame_len >> 2) & 0xFFF;
+	} else {
+		memcpy(ib_entry, ib_frame, frame_len);
+	}
 	return MV_QUEUE_COMMAND_RESULT_SENT;
 }
 
 static void mvumi_fire_cmd(struct mvumi_hba *mhba, struct mvumi_cmd *cmd)
 {
 	unsigned short num_of_cl_sent = 0;
+	unsigned int count;
 	enum mvumi_qc_result result;
 
 	if (cmd)
 		list_add_tail(&cmd->queue_pointer, &mhba->waiting_req_list);
+	count = mhba->instancet->check_ib_list(mhba);
+	if (list_empty(&mhba->waiting_req_list) || !count)
+		return;
 
-	while (!list_empty(&mhba->waiting_req_list)) {
+	do {
 		cmd = list_first_entry(&mhba->waiting_req_list,
-					 struct mvumi_cmd, queue_pointer);
+				       struct mvumi_cmd, queue_pointer);
 		list_del_init(&cmd->queue_pointer);
 		result = mvumi_send_command(mhba, cmd);
 		switch (result) {
@@ -1395,65 +1925,77 @@
 
 			return;
 		}
-	}
+	} while (!list_empty(&mhba->waiting_req_list) && count--);
+
 	if (num_of_cl_sent > 0)
 		mvumi_send_ib_list_entry(mhba);
 }
 
 /**
  * mvumi_enable_intr -	Enables interrupts
- * @regs:			FW register set
+ * @mhba:		Adapter soft state
  */
-static void mvumi_enable_intr(void *regs)
+static void mvumi_enable_intr(struct mvumi_hba *mhba)
 {
 	unsigned int mask;
+	struct mvumi_hw_regs *regs = mhba->regs;
 
-	iowrite32(0x3FFFFFFF, regs + CPU_ARM_TO_PCIEA_MASK_REG);
-	mask = ioread32(regs + CPU_ENPOINTA_MASK_REG);
-	mask |= INT_MAP_DL_CPU2PCIEA | INT_MAP_COMAOUT | INT_MAP_COMAERR;
-	iowrite32(mask, regs + CPU_ENPOINTA_MASK_REG);
+	iowrite32(regs->int_drbl_int_mask, regs->arm_to_pciea_mask_reg);
+	mask = ioread32(regs->enpointa_mask_reg);
+	mask |= regs->int_dl_cpu2pciea | regs->int_comaout | regs->int_comaerr;
+	iowrite32(mask, regs->enpointa_mask_reg);
 }
 
 /**
  * mvumi_disable_intr -Disables interrupt
- * @regs:			FW register set
+ * @mhba:		Adapter soft state
  */
-static void mvumi_disable_intr(void *regs)
+static void mvumi_disable_intr(struct mvumi_hba *mhba)
 {
 	unsigned int mask;
+	struct mvumi_hw_regs *regs = mhba->regs;
 
-	iowrite32(0, regs + CPU_ARM_TO_PCIEA_MASK_REG);
-	mask = ioread32(regs + CPU_ENPOINTA_MASK_REG);
-	mask &= ~(INT_MAP_DL_CPU2PCIEA | INT_MAP_COMAOUT | INT_MAP_COMAERR);
-	iowrite32(mask, regs + CPU_ENPOINTA_MASK_REG);
+	iowrite32(0, regs->arm_to_pciea_mask_reg);
+	mask = ioread32(regs->enpointa_mask_reg);
+	mask &= ~(regs->int_dl_cpu2pciea | regs->int_comaout |
+							regs->int_comaerr);
+	iowrite32(mask, regs->enpointa_mask_reg);
 }
 
 static int mvumi_clear_intr(void *extend)
 {
 	struct mvumi_hba *mhba = (struct mvumi_hba *) extend;
 	unsigned int status, isr_status = 0, tmp = 0;
-	void *regs = mhba->mmio;
+	struct mvumi_hw_regs *regs = mhba->regs;
 
-	status = ioread32(regs + CPU_MAIN_INT_CAUSE_REG);
-	if (!(status & INT_MAP_MU) || status == 0xFFFFFFFF)
+	status = ioread32(regs->main_int_cause_reg);
+	if (!(status & regs->int_mu) || status == 0xFFFFFFFF)
 		return 1;
-	if (unlikely(status & INT_MAP_COMAERR)) {
-		tmp = ioread32(regs + CLA_ISR_CAUSE);
-		if (tmp & (CLIC_IN_ERR_IRQ | CLIC_OUT_ERR_IRQ))
-			iowrite32(tmp & (CLIC_IN_ERR_IRQ | CLIC_OUT_ERR_IRQ),
-					regs + CLA_ISR_CAUSE);
-		status ^= INT_MAP_COMAERR;
+	if (unlikely(status & regs->int_comaerr)) {
+		tmp = ioread32(regs->outb_isr_cause);
+		if (mhba->pdev->device == PCI_DEVICE_ID_MARVELL_MV9580) {
+			if (tmp & regs->clic_out_err) {
+				iowrite32(tmp & regs->clic_out_err,
+							regs->outb_isr_cause);
+			}
+		} else {
+			if (tmp & (regs->clic_in_err | regs->clic_out_err))
+				iowrite32(tmp & (regs->clic_in_err |
+						regs->clic_out_err),
+						regs->outb_isr_cause);
+		}
+		status ^= mhba->regs->int_comaerr;
 		/* inbound or outbound parity error, command will timeout */
 	}
-	if (status & INT_MAP_COMAOUT) {
-		tmp = ioread32(regs + CLA_ISR_CAUSE);
-		if (tmp & CLIC_OUT_IRQ)
-			iowrite32(tmp & CLIC_OUT_IRQ, regs + CLA_ISR_CAUSE);
+	if (status & regs->int_comaout) {
+		tmp = ioread32(regs->outb_isr_cause);
+		if (tmp & regs->clic_irq)
+			iowrite32(tmp & regs->clic_irq, regs->outb_isr_cause);
 	}
-	if (status & INT_MAP_DL_CPU2PCIEA) {
-		isr_status = ioread32(regs + CPU_ARM_TO_PCIEA_DRBL_REG);
+	if (status & regs->int_dl_cpu2pciea) {
+		isr_status = ioread32(regs->arm_to_pciea_drbl_reg);
 		if (isr_status)
-			iowrite32(isr_status, regs + CPU_ARM_TO_PCIEA_DRBL_REG);
+			iowrite32(isr_status, regs->arm_to_pciea_drbl_reg);
 	}
 
 	mhba->global_isr = status;
@@ -1464,24 +2006,38 @@
 
 /**
  * mvumi_read_fw_status_reg - returns the current FW status value
- * @regs:			FW register set
+ * @mhba:		Adapter soft state
  */
-static unsigned int mvumi_read_fw_status_reg(void *regs)
+static unsigned int mvumi_read_fw_status_reg(struct mvumi_hba *mhba)
 {
 	unsigned int status;
 
-	status = ioread32(regs + CPU_ARM_TO_PCIEA_DRBL_REG);
+	status = ioread32(mhba->regs->arm_to_pciea_drbl_reg);
 	if (status)
-		iowrite32(status, regs + CPU_ARM_TO_PCIEA_DRBL_REG);
+		iowrite32(status, mhba->regs->arm_to_pciea_drbl_reg);
 	return status;
 }
 
-static struct mvumi_instance_template mvumi_instance_template = {
+static struct mvumi_instance_template mvumi_instance_9143 = {
 	.fire_cmd = mvumi_fire_cmd,
 	.enable_intr = mvumi_enable_intr,
 	.disable_intr = mvumi_disable_intr,
 	.clear_intr = mvumi_clear_intr,
 	.read_fw_status_reg = mvumi_read_fw_status_reg,
+	.check_ib_list = mvumi_check_ib_list_9143,
+	.check_ob_list = mvumi_check_ob_list_9143,
+	.reset_host = mvumi_reset_host_9143,
+};
+
+static struct mvumi_instance_template mvumi_instance_9580 = {
+	.fire_cmd = mvumi_fire_cmd,
+	.enable_intr = mvumi_enable_intr,
+	.disable_intr = mvumi_disable_intr,
+	.clear_intr = mvumi_clear_intr,
+	.read_fw_status_reg = mvumi_read_fw_status_reg,
+	.check_ib_list = mvumi_check_ib_list_9580,
+	.check_ob_list = mvumi_check_ob_list_9580,
+	.reset_host = mvumi_reset_host_9580,
 };
 
 static int mvumi_slave_configure(struct scsi_device *sdev)
@@ -1681,6 +2237,124 @@
 	.eh_timed_out = mvumi_timed_out,
 };
 
+static int mvumi_cfg_hw_reg(struct mvumi_hba *mhba)
+{
+	void *base = NULL;
+	struct mvumi_hw_regs *regs;
+
+	switch (mhba->pdev->device) {
+	case PCI_DEVICE_ID_MARVELL_MV9143:
+		mhba->mmio = mhba->base_addr[0];
+		base = mhba->mmio;
+		if (!mhba->regs) {
+			mhba->regs = kzalloc(sizeof(*regs), GFP_KERNEL);
+			if (mhba->regs == NULL)
+				return -ENOMEM;
+		}
+		regs = mhba->regs;
+
+		/* For Arm */
+		regs->ctrl_sts_reg          = base + 0x20104;
+		regs->rstoutn_mask_reg      = base + 0x20108;
+		regs->sys_soft_rst_reg      = base + 0x2010C;
+		regs->main_int_cause_reg    = base + 0x20200;
+		regs->enpointa_mask_reg     = base + 0x2020C;
+		regs->rstoutn_en_reg        = base + 0xF1400;
+		/* For Doorbell */
+		regs->pciea_to_arm_drbl_reg = base + 0x20400;
+		regs->arm_to_pciea_drbl_reg = base + 0x20408;
+		regs->arm_to_pciea_mask_reg = base + 0x2040C;
+		regs->pciea_to_arm_msg0     = base + 0x20430;
+		regs->pciea_to_arm_msg1     = base + 0x20434;
+		regs->arm_to_pciea_msg0     = base + 0x20438;
+		regs->arm_to_pciea_msg1     = base + 0x2043C;
+
+		/* For Message Unit */
+
+		regs->inb_aval_count_basel  = base + 0x508;
+		regs->inb_aval_count_baseh  = base + 0x50C;
+		regs->inb_write_pointer     = base + 0x518;
+		regs->inb_read_pointer      = base + 0x51C;
+		regs->outb_coal_cfg         = base + 0x568;
+		regs->outb_copy_basel       = base + 0x5B0;
+		regs->outb_copy_baseh       = base + 0x5B4;
+		regs->outb_copy_pointer     = base + 0x544;
+		regs->outb_read_pointer     = base + 0x548;
+		regs->outb_isr_cause        = base + 0x560;
+		regs->outb_coal_cfg         = base + 0x568;
+		/* Bit setting for HW */
+		regs->int_comaout           = 1 << 8;
+		regs->int_comaerr           = 1 << 6;
+		regs->int_dl_cpu2pciea      = 1 << 1;
+		regs->cl_pointer_toggle     = 1 << 12;
+		regs->clic_irq              = 1 << 1;
+		regs->clic_in_err           = 1 << 8;
+		regs->clic_out_err          = 1 << 12;
+		regs->cl_slot_num_mask      = 0xFFF;
+		regs->int_drbl_int_mask     = 0x3FFFFFFF;
+		regs->int_mu = regs->int_dl_cpu2pciea | regs->int_comaout |
+							regs->int_comaerr;
+		break;
+	case PCI_DEVICE_ID_MARVELL_MV9580:
+		mhba->mmio = mhba->base_addr[2];
+		base = mhba->mmio;
+		if (!mhba->regs) {
+			mhba->regs = kzalloc(sizeof(*regs), GFP_KERNEL);
+			if (mhba->regs == NULL)
+				return -ENOMEM;
+		}
+		regs = mhba->regs;
+		/* For Arm */
+		regs->ctrl_sts_reg          = base + 0x20104;
+		regs->rstoutn_mask_reg      = base + 0x1010C;
+		regs->sys_soft_rst_reg      = base + 0x10108;
+		regs->main_int_cause_reg    = base + 0x10200;
+		regs->enpointa_mask_reg     = base + 0x1020C;
+		regs->rstoutn_en_reg        = base + 0xF1400;
+
+		/* For Doorbell */
+		regs->pciea_to_arm_drbl_reg = base + 0x10460;
+		regs->arm_to_pciea_drbl_reg = base + 0x10480;
+		regs->arm_to_pciea_mask_reg = base + 0x10484;
+		regs->pciea_to_arm_msg0     = base + 0x10400;
+		regs->pciea_to_arm_msg1     = base + 0x10404;
+		regs->arm_to_pciea_msg0     = base + 0x10420;
+		regs->arm_to_pciea_msg1     = base + 0x10424;
+
+		/* For reset*/
+		regs->reset_request         = base + 0x10108;
+		regs->reset_enable          = base + 0x1010c;
+
+		/* For Message Unit */
+		regs->inb_aval_count_basel  = base + 0x4008;
+		regs->inb_aval_count_baseh  = base + 0x400C;
+		regs->inb_write_pointer     = base + 0x4018;
+		regs->inb_read_pointer      = base + 0x401C;
+		regs->outb_copy_basel       = base + 0x4058;
+		regs->outb_copy_baseh       = base + 0x405C;
+		regs->outb_copy_pointer     = base + 0x406C;
+		regs->outb_read_pointer     = base + 0x4070;
+		regs->outb_coal_cfg         = base + 0x4080;
+		regs->outb_isr_cause        = base + 0x4088;
+		/* Bit setting for HW */
+		regs->int_comaout           = 1 << 4;
+		regs->int_dl_cpu2pciea      = 1 << 12;
+		regs->int_comaerr           = 1 << 29;
+		regs->cl_pointer_toggle     = 1 << 14;
+		regs->cl_slot_num_mask      = 0x3FFF;
+		regs->clic_irq              = 1 << 0;
+		regs->clic_out_err          = 1 << 1;
+		regs->int_drbl_int_mask     = 0x3FFFFFFF;
+		regs->int_mu = regs->int_dl_cpu2pciea | regs->int_comaout;
+		break;
+	default:
+		return -1;
+		break;
+	}
+
+	return 0;
+}
+
 /**
  * mvumi_init_fw -	Initializes the FW
  * @mhba:		Adapter soft state
@@ -1699,15 +2373,18 @@
 	if (ret)
 		goto fail_ioremap;
 
-	mhba->mmio = mhba->base_addr[0];
-
 	switch (mhba->pdev->device) {
 	case PCI_DEVICE_ID_MARVELL_MV9143:
-		mhba->instancet = &mvumi_instance_template;
+		mhba->instancet = &mvumi_instance_9143;
 		mhba->io_seq = 0;
 		mhba->max_sge = MVUMI_MAX_SG_ENTRY;
 		mhba->request_id_enabled = 1;
 		break;
+	case PCI_DEVICE_ID_MARVELL_MV9580:
+		mhba->instancet = &mvumi_instance_9580;
+		mhba->io_seq = 0;
+		mhba->max_sge = MVUMI_MAX_SG_ENTRY;
+		break;
 	default:
 		dev_err(&mhba->pdev->dev, "device 0x%x not supported!\n",
 							mhba->pdev->device);
@@ -1717,15 +2394,21 @@
 	}
 	dev_dbg(&mhba->pdev->dev, "device id : %04X is found.\n",
 							mhba->pdev->device);
-
-	mhba->handshake_page = kzalloc(HSP_MAX_SIZE, GFP_KERNEL);
+	ret = mvumi_cfg_hw_reg(mhba);
+	if (ret) {
+		dev_err(&mhba->pdev->dev,
+			"failed to allocate memory for reg\n");
+		ret = -ENOMEM;
+		goto fail_alloc_mem;
+	}
+	mhba->handshake_page = pci_alloc_consistent(mhba->pdev, HSP_MAX_SIZE,
+						&mhba->handshake_page_phys);
 	if (!mhba->handshake_page) {
 		dev_err(&mhba->pdev->dev,
 			"failed to allocate memory for handshake\n");
 		ret = -ENOMEM;
-		goto fail_alloc_mem;
+		goto fail_alloc_page;
 	}
-	mhba->handshake_page_phys = virt_to_phys(mhba->handshake_page);
 
 	if (mvumi_start(mhba)) {
 		ret = -EINVAL;
@@ -1739,7 +2422,10 @@
 
 fail_ready_state:
 	mvumi_release_mem_resource(mhba);
-	kfree(mhba->handshake_page);
+	pci_free_consistent(mhba->pdev, HSP_MAX_SIZE,
+		mhba->handshake_page, mhba->handshake_page_phys);
+fail_alloc_page:
+	kfree(mhba->regs);
 fail_alloc_mem:
 	mvumi_unmap_pci_addr(mhba->pdev, mhba->base_addr);
 fail_ioremap:
@@ -1755,6 +2441,7 @@
 static int mvumi_io_attach(struct mvumi_hba *mhba)
 {
 	struct Scsi_Host *host = mhba->shost;
+	struct scsi_device *sdev = NULL;
 	int ret;
 	unsigned int max_sg = (mhba->ib_max_size + 4 -
 		sizeof(struct mvumi_msg_frame)) / sizeof(struct mvumi_sgl);
@@ -1764,7 +2451,7 @@
 	host->can_queue = (mhba->max_io - 1) ? (mhba->max_io - 1) : 1;
 	host->sg_tablesize = mhba->max_sge > max_sg ? max_sg : mhba->max_sge;
 	host->max_sectors = mhba->max_transfer_size / 512;
-	host->cmd_per_lun =  (mhba->max_io - 1) ? (mhba->max_io - 1) : 1;
+	host->cmd_per_lun = (mhba->max_io - 1) ? (mhba->max_io - 1) : 1;
 	host->max_id = mhba->max_target_id;
 	host->max_cmd_len = MAX_COMMAND_SIZE;
 	host->transportt = &mvumi_transport_template;
@@ -1775,9 +2462,43 @@
 		return ret;
 	}
 	mhba->fw_flag |= MVUMI_FW_ATTACH;
-	scsi_scan_host(host);
 
+	mutex_lock(&mhba->sas_discovery_mutex);
+	if (mhba->pdev->device == PCI_DEVICE_ID_MARVELL_MV9580)
+		ret = scsi_add_device(host, 0, mhba->max_target_id - 1, 0);
+	else
+		ret = 0;
+	if (ret) {
+		dev_err(&mhba->pdev->dev, "add virtual device failed\n");
+		mutex_unlock(&mhba->sas_discovery_mutex);
+		goto fail_add_device;
+	}
+
+	mhba->dm_thread = kthread_create(mvumi_rescan_bus,
+						mhba, "mvumi_scanthread");
+	if (IS_ERR(mhba->dm_thread)) {
+		dev_err(&mhba->pdev->dev,
+			"failed to create device scan thread\n");
+		mutex_unlock(&mhba->sas_discovery_mutex);
+		goto fail_create_thread;
+	}
+	atomic_set(&mhba->pnp_count, 1);
+	wake_up_process(mhba->dm_thread);
+
+	mutex_unlock(&mhba->sas_discovery_mutex);
 	return 0;
+
+fail_create_thread:
+	if (mhba->pdev->device == PCI_DEVICE_ID_MARVELL_MV9580)
+		sdev = scsi_device_lookup(mhba->shost, 0,
+						mhba->max_target_id - 1, 0);
+	if (sdev) {
+		scsi_remove_device(sdev);
+		scsi_device_put(sdev);
+	}
+fail_add_device:
+	scsi_remove_host(mhba->shost);
+	return ret;
 }
 
 /**
@@ -1828,8 +2549,12 @@
 	INIT_LIST_HEAD(&mhba->free_ob_list);
 	INIT_LIST_HEAD(&mhba->res_list);
 	INIT_LIST_HEAD(&mhba->waiting_req_list);
+	mutex_init(&mhba->device_lock);
+	INIT_LIST_HEAD(&mhba->mhba_dev_list);
+	INIT_LIST_HEAD(&mhba->shost_dev_list);
 	atomic_set(&mhba->fw_outstanding, 0);
 	init_waitqueue_head(&mhba->int_cmd_wait_q);
+	mutex_init(&mhba->sas_discovery_mutex);
 
 	mhba->pdev = pdev;
 	mhba->shost = host;
@@ -1845,19 +2570,22 @@
 		dev_err(&pdev->dev, "failed to register IRQ\n");
 		goto fail_init_irq;
 	}
-	mhba->instancet->enable_intr(mhba->mmio);
+
+	mhba->instancet->enable_intr(mhba);
 	pci_set_drvdata(pdev, mhba);
 
 	ret = mvumi_io_attach(mhba);
 	if (ret)
 		goto fail_io_attach;
+
+	mvumi_backup_bar_addr(mhba);
 	dev_dbg(&pdev->dev, "probe mvumi driver successfully.\n");
 
 	return 0;
 
 fail_io_attach:
 	pci_set_drvdata(pdev, NULL);
-	mhba->instancet->disable_intr(mhba->mmio);
+	mhba->instancet->disable_intr(mhba);
 	free_irq(mhba->pdev->irq, mhba);
 fail_init_irq:
 	mvumi_release_fw(mhba);
@@ -1877,11 +2605,17 @@
 	struct mvumi_hba *mhba;
 
 	mhba = pci_get_drvdata(pdev);
+	if (mhba->dm_thread) {
+		kthread_stop(mhba->dm_thread);
+		mhba->dm_thread = NULL;
+	}
+
+	mvumi_detach_devices(mhba);
 	host = mhba->shost;
 	scsi_remove_host(mhba->shost);
 	mvumi_flush_cache(mhba);
 
-	mhba->instancet->disable_intr(mhba->mmio);
+	mhba->instancet->disable_intr(mhba);
 	free_irq(mhba->pdev->irq, mhba);
 	mvumi_release_fw(mhba);
 	scsi_host_put(host);
@@ -1909,7 +2643,7 @@
 	mvumi_flush_cache(mhba);
 
 	pci_set_drvdata(pdev, mhba);
-	mhba->instancet->disable_intr(mhba->mmio);
+	mhba->instancet->disable_intr(mhba);
 	free_irq(mhba->pdev->irq, mhba);
 	mvumi_unmap_pci_addr(pdev, mhba->base_addr);
 	pci_release_regions(pdev);
@@ -1956,8 +2690,13 @@
 	if (ret)
 		goto release_regions;
 
+	if (mvumi_cfg_hw_reg(mhba)) {
+		ret = -EINVAL;
+		goto unmap_pci_addr;
+	}
+
 	mhba->mmio = mhba->base_addr[0];
-	mvumi_reset(mhba->mmio);
+	mvumi_reset(mhba);
 
 	if (mvumi_start(mhba)) {
 		ret = -EINVAL;
@@ -1970,7 +2709,7 @@
 		dev_err(&pdev->dev, "failed to register IRQ\n");
 		goto unmap_pci_addr;
 	}
-	mhba->instancet->enable_intr(mhba->mmio);
+	mhba->instancet->enable_intr(mhba);
 
 	return 0;
 
diff --git a/drivers/scsi/mvumi.h b/drivers/scsi/mvumi.h
index 10b92375..e360135 100644
--- a/drivers/scsi/mvumi.h
+++ b/drivers/scsi/mvumi.h
@@ -34,51 +34,87 @@
 #define MV_DRIVER_NAME			"mvumi"
 #define PCI_VENDOR_ID_MARVELL_2		0x1b4b
 #define PCI_DEVICE_ID_MARVELL_MV9143	0x9143
+#define PCI_DEVICE_ID_MARVELL_MV9580	0x9580
 
 #define MVUMI_INTERNAL_CMD_WAIT_TIME	45
+#define MVUMI_INQUIRY_LENGTH		44
+#define MVUMI_INQUIRY_UUID_OFF		36
+#define MVUMI_INQUIRY_UUID_LEN		8
 
 #define IS_DMA64			(sizeof(dma_addr_t) == 8)
 
 enum mvumi_qc_result {
-	MV_QUEUE_COMMAND_RESULT_SENT	= 0,
+	MV_QUEUE_COMMAND_RESULT_SENT = 0,
 	MV_QUEUE_COMMAND_RESULT_NO_RESOURCE,
 };
 
+struct mvumi_hw_regs {
+	/* For CPU */
+	void *main_int_cause_reg;
+	void *enpointa_mask_reg;
+	void *enpointb_mask_reg;
+	void *rstoutn_en_reg;
+	void *ctrl_sts_reg;
+	void *rstoutn_mask_reg;
+	void *sys_soft_rst_reg;
+
+	/* For Doorbell */
+	void *pciea_to_arm_drbl_reg;
+	void *arm_to_pciea_drbl_reg;
+	void *arm_to_pciea_mask_reg;
+	void *pciea_to_arm_msg0;
+	void *pciea_to_arm_msg1;
+	void *arm_to_pciea_msg0;
+	void *arm_to_pciea_msg1;
+
+	/* reset register */
+	void *reset_request;
+	void *reset_enable;
+
+	/* For Message Unit */
+	void *inb_list_basel;
+	void *inb_list_baseh;
+	void *inb_aval_count_basel;
+	void *inb_aval_count_baseh;
+	void *inb_write_pointer;
+	void *inb_read_pointer;
+	void *outb_list_basel;
+	void *outb_list_baseh;
+	void *outb_copy_basel;
+	void *outb_copy_baseh;
+	void *outb_copy_pointer;
+	void *outb_read_pointer;
+	void *inb_isr_cause;
+	void *outb_isr_cause;
+	void *outb_coal_cfg;
+	void *outb_coal_timeout;
+
+	/* Bit setting for HW */
+	u32 int_comaout;
+	u32 int_comaerr;
+	u32 int_dl_cpu2pciea;
+	u32 int_mu;
+	u32 int_drbl_int_mask;
+	u32 int_main_int_mask;
+	u32 cl_pointer_toggle;
+	u32 cl_slot_num_mask;
+	u32 clic_irq;
+	u32 clic_in_err;
+	u32 clic_out_err;
+};
+
+struct mvumi_dyn_list_entry {
+	u32 src_low_addr;
+	u32 src_high_addr;
+	u32 if_length;
+	u32 reserve;
+};
+
+#define SCSI_CMD_MARVELL_SPECIFIC	0xE1
+#define CDB_CORE_MODULE			0x1
+#define CDB_CORE_SHUTDOWN		0xB
+
 enum {
-	/*******************************************/
-
-	/* ARM Mbus Registers Map	*/
-
-	/*******************************************/
-	CPU_MAIN_INT_CAUSE_REG	= 0x20200,
-	CPU_MAIN_IRQ_MASK_REG	= 0x20204,
-	CPU_MAIN_FIQ_MASK_REG	= 0x20208,
-	CPU_ENPOINTA_MASK_REG	= 0x2020C,
-	CPU_ENPOINTB_MASK_REG	= 0x20210,
-
-	INT_MAP_COMAERR		= 1 << 6,
-	INT_MAP_COMAIN		= 1 << 7,
-	INT_MAP_COMAOUT		= 1 << 8,
-	INT_MAP_COMBERR		= 1 << 9,
-	INT_MAP_COMBIN		= 1 << 10,
-	INT_MAP_COMBOUT		= 1 << 11,
-
-	INT_MAP_COMAINT	= (INT_MAP_COMAOUT | INT_MAP_COMAERR),
-	INT_MAP_COMBINT	= (INT_MAP_COMBOUT | INT_MAP_COMBIN | INT_MAP_COMBERR),
-
-	INT_MAP_DL_PCIEA2CPU	= 1 << 0,
-	INT_MAP_DL_CPU2PCIEA	= 1 << 1,
-
-	/***************************************/
-
-	/* ARM Doorbell Registers Map		*/
-
-	/***************************************/
-	CPU_PCIEA_TO_ARM_DRBL_REG	= 0x20400,
-	CPU_PCIEA_TO_ARM_MASK_REG	= 0x20404,
-	CPU_ARM_TO_PCIEA_DRBL_REG	= 0x20408,
-	CPU_ARM_TO_PCIEA_MASK_REG	= 0x2040C,
-
 	DRBL_HANDSHAKE			= 1 << 0,
 	DRBL_SOFT_RESET			= 1 << 1,
 	DRBL_BUS_CHANGE			= 1 << 2,
@@ -86,46 +122,6 @@
 	DRBL_MU_RESET			= 1 << 4,
 	DRBL_HANDSHAKE_ISR		= DRBL_HANDSHAKE,
 
-	CPU_PCIEA_TO_ARM_MSG0		= 0x20430,
-	CPU_PCIEA_TO_ARM_MSG1		= 0x20434,
-	CPU_ARM_TO_PCIEA_MSG0		= 0x20438,
-	CPU_ARM_TO_PCIEA_MSG1		= 0x2043C,
-
-	/*******************************************/
-
-	/* ARM Communication List Registers Map    */
-
-	/*******************************************/
-	CLA_INB_LIST_BASEL		= 0x500,
-	CLA_INB_LIST_BASEH		= 0x504,
-	CLA_INB_AVAL_COUNT_BASEL	= 0x508,
-	CLA_INB_AVAL_COUNT_BASEH	= 0x50C,
-	CLA_INB_DESTI_LIST_BASEL	= 0x510,
-	CLA_INB_DESTI_LIST_BASEH	= 0x514,
-	CLA_INB_WRITE_POINTER		= 0x518,
-	CLA_INB_READ_POINTER		= 0x51C,
-
-	CLA_OUTB_LIST_BASEL		= 0x530,
-	CLA_OUTB_LIST_BASEH		= 0x534,
-	CLA_OUTB_SOURCE_LIST_BASEL	= 0x538,
-	CLA_OUTB_SOURCE_LIST_BASEH	= 0x53C,
-	CLA_OUTB_COPY_POINTER		= 0x544,
-	CLA_OUTB_READ_POINTER		= 0x548,
-
-	CLA_ISR_CAUSE			= 0x560,
-	CLA_ISR_MASK			= 0x564,
-
-	INT_MAP_MU		= (INT_MAP_DL_CPU2PCIEA | INT_MAP_COMAINT),
-
-	CL_POINTER_TOGGLE		= 1 << 12,
-
-	CLIC_IN_IRQ			= 1 << 0,
-	CLIC_OUT_IRQ			= 1 << 1,
-	CLIC_IN_ERR_IRQ			= 1 << 8,
-	CLIC_OUT_ERR_IRQ		= 1 << 12,
-
-	CL_SLOT_NUM_MASK		= 0xFFF,
-
 	/*
 	* Command flag is the flag for the CDB command itself
 	*/
@@ -137,15 +133,23 @@
 	CMD_FLAG_DATA_IN		= 1 << 3,
 	/* 1-host write data */
 	CMD_FLAG_DATA_OUT		= 1 << 4,
-
-	SCSI_CMD_MARVELL_SPECIFIC	= 0xE1,
-	CDB_CORE_SHUTDOWN		= 0xB,
+	CMD_FLAG_PRDT_IN_HOST		= 1 << 5,
 };
 
 #define APICDB0_EVENT			0xF4
 #define APICDB1_EVENT_GETEVENT		0
+#define APICDB1_HOST_GETEVENT		1
 #define MAX_EVENTS_RETURNED		6
 
+#define DEVICE_OFFLINE	0
+#define DEVICE_ONLINE	1
+
+struct mvumi_hotplug_event {
+	u16 size;
+	u8 dummy[2];
+	u8 bitmap[0];
+};
+
 struct mvumi_driver_event {
 	u32	time_stamp;
 	u32	sequence_no;
@@ -172,8 +176,14 @@
 	void *param;
 };
 
+#define HS_CAPABILITY_SUPPORT_COMPACT_SG	(1U << 4)
+#define HS_CAPABILITY_SUPPORT_PRD_HOST		(1U << 5)
+#define HS_CAPABILITY_SUPPORT_DYN_SRC		(1U << 6)
+#define HS_CAPABILITY_NEW_PAGE_IO_DEPTH_DEF	(1U << 14)
+
 #define MVUMI_MAX_SG_ENTRY	32
 #define SGD_EOT			(1L << 27)
+#define SGD_EOT_CP		(1L << 22)
 
 struct mvumi_sgl {
 	u32	baseaddr_l;
@@ -181,6 +191,39 @@
 	u32	flags;
 	u32	size;
 };
+struct mvumi_compact_sgl {
+	u32	baseaddr_l;
+	u32	baseaddr_h;
+	u32	flags;
+};
+
+#define GET_COMPACT_SGD_SIZE(sgd)	\
+	((((struct mvumi_compact_sgl *)(sgd))->flags) & 0x3FFFFFL)
+
+#define SET_COMPACT_SGD_SIZE(sgd, sz) do {			\
+	(((struct mvumi_compact_sgl *)(sgd))->flags) &= ~0x3FFFFFL;	\
+	(((struct mvumi_compact_sgl *)(sgd))->flags) |= (sz);		\
+} while (0)
+#define sgd_getsz(_mhba, sgd, sz) do {				\
+	if (_mhba->hba_capability & HS_CAPABILITY_SUPPORT_COMPACT_SG)	\
+		(sz) = GET_COMPACT_SGD_SIZE(sgd);	\
+	else \
+		(sz) = (sgd)->size;			\
+} while (0)
+
+#define sgd_setsz(_mhba, sgd, sz) do {				\
+	if (_mhba->hba_capability & HS_CAPABILITY_SUPPORT_COMPACT_SG)	\
+		SET_COMPACT_SGD_SIZE(sgd, sz);		\
+	else \
+		(sgd)->size = (sz);			\
+} while (0)
+
+#define sgd_inc(_mhba, sgd) do {	\
+	if (_mhba->hba_capability & HS_CAPABILITY_SUPPORT_COMPACT_SG)	\
+		sgd = (struct mvumi_sgl *)(((unsigned char *) (sgd)) + 12); \
+	else \
+		sgd = (struct mvumi_sgl *)(((unsigned char *) (sgd)) + 16); \
+} while (0)
 
 struct mvumi_res {
 	struct list_head entry;
@@ -197,7 +240,7 @@
 };
 
 struct mvumi_sense_data {
-	u8 error_eode:7;
+	u8 error_code:7;
 	u8 valid:1;
 	u8 segment_number;
 	u8 sense_key:4;
@@ -220,6 +263,7 @@
 struct mvumi_cmd {
 	struct list_head queue_pointer;
 	struct mvumi_msg_frame *frame;
+	dma_addr_t frame_phys;
 	struct scsi_cmnd *scmd;
 	atomic_t sync_cmd;
 	void *data_buf;
@@ -393,7 +437,8 @@
 	u16 frame_length;
 
 	u8 host_type;
-	u8 reserved[3];
+	u8 host_cap;
+	u8 reserved[2];
 	struct version_info host_ver;
 	u32 system_io_bus;
 	u32 slot_number;
@@ -435,8 +480,17 @@
 	unsigned short size;
 };
 
+struct mvumi_device {
+	struct list_head list;
+	struct scsi_device *sdev;
+	u64	wwid;
+	u8	dev_type;
+	int	id;
+};
+
 struct mvumi_hba {
 	void *base_addr[MAX_BASE_ADDRESS];
+	u32 pci_base[MAX_BASE_ADDRESS];
 	void *mmio;
 	struct list_head cmd_pool;
 	struct Scsi_Host *shost;
@@ -449,6 +503,9 @@
 	void *ib_list;
 	dma_addr_t ib_list_phys;
 
+	void *ib_frame;
+	dma_addr_t ib_frame_phys;
+
 	void *ob_list;
 	dma_addr_t ob_list_phys;
 
@@ -477,12 +534,14 @@
 	unsigned char hba_total_pages;
 	unsigned char fw_flag;
 	unsigned char request_id_enabled;
+	unsigned char eot_flag;
 	unsigned short hba_capability;
 	unsigned short io_seq;
 
 	unsigned int ib_cur_slot;
 	unsigned int ob_cur_slot;
 	unsigned int fw_state;
+	struct mutex sas_discovery_mutex;
 
 	struct list_head ob_data_list;
 	struct list_head free_ob_list;
@@ -491,14 +550,24 @@
 
 	struct mvumi_tag tag_pool;
 	struct mvumi_cmd **tag_cmd;
+	struct mvumi_hw_regs *regs;
+	struct mutex device_lock;
+	struct list_head mhba_dev_list;
+	struct list_head shost_dev_list;
+	struct task_struct *dm_thread;
+	atomic_t pnp_count;
 };
 
 struct mvumi_instance_template {
-	void (*fire_cmd)(struct mvumi_hba *, struct mvumi_cmd *);
-	void (*enable_intr)(void *) ;
-	void (*disable_intr)(void *);
-	int (*clear_intr)(void *);
-	unsigned int (*read_fw_status_reg)(void *);
+	void (*fire_cmd) (struct mvumi_hba *, struct mvumi_cmd *);
+	void (*enable_intr) (struct mvumi_hba *);
+	void (*disable_intr) (struct mvumi_hba *);
+	int (*clear_intr) (void *);
+	unsigned int (*read_fw_status_reg) (struct mvumi_hba *);
+	unsigned int (*check_ib_list) (struct mvumi_hba *);
+	int (*check_ob_list) (struct mvumi_hba *, unsigned int *,
+			      unsigned int *);
+	int (*reset_host) (struct mvumi_hba *);
 };
 
 extern struct timezone sys_tz;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 799a58b..48fca47 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2080,6 +2080,7 @@
 	uint8_t       domain;
 	char		connect_type[22];
 	struct qla_hw_data *ha = vha->hw;
+	unsigned long flags;
 
 	/* Get host addresses. */
 	rval = qla2x00_get_adapter_id(vha,
@@ -2154,9 +2155,9 @@
 	vha->d_id.b.area = area;
 	vha->d_id.b.al_pa = al_pa;
 
-	spin_lock(&ha->vport_slock);
+	spin_lock_irqsave(&ha->vport_slock, flags);
 	qlt_update_vp_map(vha, SET_AL_PA);
-	spin_unlock(&ha->vport_slock);
+	spin_unlock_irqrestore(&ha->vport_slock, flags);
 
 	if (!vha->flags.init_done)
 		ql_log(ql_log_info, vha, 0x2010,
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 57fbd5a..5cda11c 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2055,7 +2055,7 @@
 		block = lba + alignment;
 		rem = do_div(block, granularity);
 
-		if (rem == 0 && lba + granularity <= end && block < map_size) {
+		if (rem == 0 && lba + granularity < end && block < map_size) {
 			clear_bit(block, map_storep);
 			if (scsi_debug_lbprz)
 				memset(fake_storep +
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index de2337f..c1b05a8 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -789,7 +789,6 @@
 			     int cmnd_size, int timeout, unsigned sense_bytes)
 {
 	struct scsi_device *sdev = scmd->device;
-	struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
 	struct Scsi_Host *shost = sdev->host;
 	DECLARE_COMPLETION_ONSTACK(done);
 	unsigned long timeleft;
@@ -845,8 +844,11 @@
 
 	scsi_eh_restore_cmnd(scmd, &ses);
 
-	if (sdrv && sdrv->eh_action)
-		rtn = sdrv->eh_action(scmd, cmnd, cmnd_size, rtn);
+	if (scmd->request->cmd_type != REQ_TYPE_BLOCK_PC) {
+		struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd);
+		if (sdrv->eh_action)
+			rtn = sdrv->eh_action(scmd, cmnd, cmnd_size, rtn);
+	}
 
 	return rtn;
 }
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 528d52b..0144078 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -1221,7 +1221,12 @@
 	/*
 	 * At this point, all outstanding requests in the adapter
 	 * should have been flushed out and return to us
+	 * There is a potential race here where the host may be in
+	 * the process of responding when we return from here.
+	 * Just wait for all in-transit packets to be accounted for
+	 * before we return from here.
 	 */
+	storvsc_wait_to_drain(stor_device);
 
 	return SUCCESS;
 }
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 3e79a2f..595af1a 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -219,7 +219,7 @@
 	struct scatterlist sg;
 	unsigned long flags;
 
-	sg_set_buf(&sg, &event_node->event, sizeof(struct virtio_scsi_event));
+	sg_init_one(&sg, &event_node->event, sizeof(struct virtio_scsi_event));
 
 	spin_lock_irqsave(&vscsi->event_vq.vq_lock, flags);
 
@@ -279,6 +279,31 @@
 	}
 }
 
+static void virtscsi_handle_param_change(struct virtio_scsi *vscsi,
+					 struct virtio_scsi_event *event)
+{
+	struct scsi_device *sdev;
+	struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev);
+	unsigned int target = event->lun[1];
+	unsigned int lun = (event->lun[2] << 8) | event->lun[3];
+	u8 asc = event->reason & 255;
+	u8 ascq = event->reason >> 8;
+
+	sdev = scsi_device_lookup(shost, 0, target, lun);
+	if (!sdev) {
+		pr_err("SCSI device %d 0 %d %d not found\n",
+			shost->host_no, target, lun);
+		return;
+	}
+
+	/* Handle "Parameters changed", "Mode parameters changed", and
+	   "Capacity data has changed".  */
+	if (asc == 0x2a && (ascq == 0x00 || ascq == 0x01 || ascq == 0x09))
+		scsi_rescan_device(&sdev->sdev_gendev);
+
+	scsi_device_put(sdev);
+}
+
 static void virtscsi_handle_event(struct work_struct *work)
 {
 	struct virtio_scsi_event_node *event_node =
@@ -297,6 +322,9 @@
 	case VIRTIO_SCSI_T_TRANSPORT_RESET:
 		virtscsi_handle_transport_reset(vscsi, event);
 		break;
+	case VIRTIO_SCSI_T_PARAM_CHANGE:
+		virtscsi_handle_param_change(vscsi, event);
+		break;
 	default:
 		pr_err("Unsupport virtio scsi event %x\n", event->event);
 	}
@@ -677,7 +705,11 @@
 	cmd_per_lun = virtscsi_config_get(vdev, cmd_per_lun) ?: 1;
 	shost->cmd_per_lun = min_t(u32, cmd_per_lun, shost->can_queue);
 	shost->max_sectors = virtscsi_config_get(vdev, max_sectors) ?: 0xFFFF;
-	shost->max_lun = virtscsi_config_get(vdev, max_lun) + 1;
+
+	/* LUNs > 256 are reported with format 1, so they go in the range
+	 * 16640-32767.
+	 */
+	shost->max_lun = virtscsi_config_get(vdev, max_lun) + 1 + 0x4000;
 	shost->max_id = num_targets;
 	shost->max_channel = 0;
 	shost->max_cmd_len = VIRTIO_SCSI_CDB_SIZE;
@@ -733,7 +765,8 @@
 };
 
 static unsigned int features[] = {
-	VIRTIO_SCSI_F_HOTPLUG
+	VIRTIO_SCSI_F_HOTPLUG,
+	VIRTIO_SCSI_F_CHANGE,
 };
 
 static struct virtio_driver virtio_scsi_driver = {
diff --git a/drivers/staging/omap-thermal/omap-thermal-common.c b/drivers/staging/omap-thermal/omap-thermal-common.c
index 46ee0a9f..5c0c203b 100644
--- a/drivers/staging/omap-thermal/omap-thermal-common.c
+++ b/drivers/staging/omap-thermal/omap-thermal-common.c
@@ -126,7 +126,9 @@
 
 	/* TODO: bind with min and max states */
 	/* Simple thing, two trips, one passive another critical */
-	return thermal_zone_bind_cooling_device(thermal, 0, cdev);
+	return thermal_zone_bind_cooling_device(thermal, 0, cdev,
+						THERMAL_NO_LIMIT,
+						THERMAL_NO_LIMIT);
 }
 
 /* Unbind callback functions for thermal zone */
@@ -268,7 +270,6 @@
 	/* Create thermal zone */
 	data->omap_thermal = thermal_zone_device_register(domain,
 				OMAP_TRIP_NUMBER, 0, data, &omap_thermal_ops,
-				1, 2, /*TODO: remove this when FW allows */
 				FAST_TEMP_MONITORING_RATE,
 				FAST_TEMP_MONITORING_RATE);
 	if (IS_ERR_OR_NULL(data->omap_thermal)) {
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 3ab2bd5..edfd67d 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -19,6 +19,17 @@
 	depends on HWMON=y || HWMON=THERMAL
 	default y
 
+config CPU_THERMAL
+	bool "generic cpu cooling support"
+	depends on THERMAL && CPU_FREQ
+	help
+	  This implements the generic cpu cooling mechanism through frequency
+	  reduction, cpu hotplug and any other ways of reducing temperature. An
+	  ACPI version of this already exists(drivers/acpi/processor_thermal.c).
+	  This will be useful for platforms using the generic thermal interface
+	  and not the ACPI interface.
+	  If you want this support, you should say Y here.
+
 config SPEAR_THERMAL
 	bool "SPEAr thermal sensor driver"
 	depends on THERMAL
@@ -27,3 +38,18 @@
 	help
 	  Enable this to plug the SPEAr thermal sensor driver into the Linux
 	  thermal framework
+
+config RCAR_THERMAL
+	tristate "Renesas R-Car thermal driver"
+	depends on THERMAL
+	depends on ARCH_SHMOBILE
+	help
+	  Enable this to plug the R-Car thermal sensor driver into the Linux
+	  thermal framework
+
+config EXYNOS_THERMAL
+	tristate "Temperature sensor on Samsung EXYNOS"
+	depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && THERMAL
+	help
+	  If you say yes here you get support for TMU (Thermal Managment
+	  Unit) on SAMSUNG EXYNOS series of SoC.
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index a9fff0b..885550d 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -3,4 +3,7 @@
 #
 
 obj-$(CONFIG_THERMAL)		+= thermal_sys.o
-obj-$(CONFIG_SPEAR_THERMAL)		+= spear_thermal.o
\ No newline at end of file
+obj-$(CONFIG_CPU_THERMAL)		+= cpu_cooling.o
+obj-$(CONFIG_SPEAR_THERMAL)		+= spear_thermal.o
+obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
+obj-$(CONFIG_EXYNOS_THERMAL)		+= exynos_thermal.o
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
new file mode 100644
index 0000000..cc1c930
--- /dev/null
+++ b/drivers/thermal/cpu_cooling.c
@@ -0,0 +1,449 @@
+/*
+ *  linux/drivers/thermal/cpu_cooling.c
+ *
+ *  Copyright (C) 2012	Samsung Electronics Co., Ltd(http://www.samsung.com)
+ *  Copyright (C) 2012  Amit Daniel <amit.kachhap@linaro.org>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/cpu.h>
+#include <linux/cpu_cooling.h>
+
+/**
+ * struct cpufreq_cooling_device
+ * @id: unique integer value corresponding to each cpufreq_cooling_device
+ *	registered.
+ * @cool_dev: thermal_cooling_device pointer to keep track of the the
+ *	egistered cooling device.
+ * @cpufreq_state: integer value representing the current state of cpufreq
+ *	cooling	devices.
+ * @cpufreq_val: integer value representing the absolute value of the clipped
+ *	frequency.
+ * @allowed_cpus: all the cpus involved for this cpufreq_cooling_device.
+ * @node: list_head to link all cpufreq_cooling_device together.
+ *
+ * This structure is required for keeping information of each
+ * cpufreq_cooling_device registered as a list whose head is represented by
+ * cooling_cpufreq_list. In order to prevent corruption of this list a
+ * mutex lock cooling_cpufreq_lock is used.
+ */
+struct cpufreq_cooling_device {
+	int id;
+	struct thermal_cooling_device *cool_dev;
+	unsigned int cpufreq_state;
+	unsigned int cpufreq_val;
+	struct cpumask allowed_cpus;
+	struct list_head node;
+};
+static LIST_HEAD(cooling_cpufreq_list);
+static DEFINE_IDR(cpufreq_idr);
+
+static struct mutex cooling_cpufreq_lock;
+
+/* notify_table passes value to the CPUFREQ_ADJUST callback function. */
+#define NOTIFY_INVALID NULL
+struct cpufreq_cooling_device *notify_device;
+
+/**
+ * get_idr - function to get a unique id.
+ * @idr: struct idr * handle used to create a id.
+ * @id: int * value generated by this function.
+ */
+static int get_idr(struct idr *idr, int *id)
+{
+	int err;
+again:
+	if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0))
+		return -ENOMEM;
+
+	mutex_lock(&cooling_cpufreq_lock);
+	err = idr_get_new(idr, NULL, id);
+	mutex_unlock(&cooling_cpufreq_lock);
+
+	if (unlikely(err == -EAGAIN))
+		goto again;
+	else if (unlikely(err))
+		return err;
+
+	*id = *id & MAX_IDR_MASK;
+	return 0;
+}
+
+/**
+ * release_idr - function to free the unique id.
+ * @idr: struct idr * handle used for creating the id.
+ * @id: int value representing the unique id.
+ */
+static void release_idr(struct idr *idr, int id)
+{
+	mutex_lock(&cooling_cpufreq_lock);
+	idr_remove(idr, id);
+	mutex_unlock(&cooling_cpufreq_lock);
+}
+
+/* Below code defines functions to be used for cpufreq as cooling device */
+
+/**
+ * is_cpufreq_valid - function to check if a cpu has frequency transition policy.
+ * @cpu: cpu for which check is needed.
+ */
+static int is_cpufreq_valid(int cpu)
+{
+	struct cpufreq_policy policy;
+	return !cpufreq_get_policy(&policy, cpu);
+}
+
+/**
+ * get_cpu_frequency - get the absolute value of frequency from level.
+ * @cpu: cpu for which frequency is fetched.
+ * @level: level of frequency of the CPU
+ *	e.g level=1 --> 1st MAX FREQ, LEVEL=2 ---> 2nd MAX FREQ, .... etc
+ */
+static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level)
+{
+	int ret = 0, i = 0;
+	unsigned long level_index;
+	bool descend = false;
+	struct cpufreq_frequency_table *table =
+					cpufreq_frequency_get_table(cpu);
+	if (!table)
+		return ret;
+
+	while (table[i].frequency != CPUFREQ_TABLE_END) {
+		if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
+			continue;
+
+		/*check if table in ascending or descending order*/
+		if ((table[i + 1].frequency != CPUFREQ_TABLE_END) &&
+			(table[i + 1].frequency < table[i].frequency)
+			&& !descend) {
+			descend = true;
+		}
+
+		/*return if level matched and table in descending order*/
+		if (descend && i == level)
+			return table[i].frequency;
+		i++;
+	}
+	i--;
+
+	if (level > i || descend)
+		return ret;
+	level_index = i - level;
+
+	/*Scan the table in reverse order and match the level*/
+	while (i >= 0) {
+		if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
+			continue;
+		/*return if level matched*/
+		if (i == level_index)
+			return table[i].frequency;
+		i--;
+	}
+	return ret;
+}
+
+/**
+ * cpufreq_apply_cooling - function to apply frequency clipping.
+ * @cpufreq_device: cpufreq_cooling_device pointer containing frequency
+ *	clipping data.
+ * @cooling_state: value of the cooling state.
+ */
+static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device,
+				unsigned long cooling_state)
+{
+	unsigned int cpuid, clip_freq;
+	struct cpumask *maskPtr = &cpufreq_device->allowed_cpus;
+	unsigned int cpu = cpumask_any(maskPtr);
+
+
+	/* Check if the old cooling action is same as new cooling action */
+	if (cpufreq_device->cpufreq_state == cooling_state)
+		return 0;
+
+	clip_freq = get_cpu_frequency(cpu, cooling_state);
+	if (!clip_freq)
+		return -EINVAL;
+
+	cpufreq_device->cpufreq_state = cooling_state;
+	cpufreq_device->cpufreq_val = clip_freq;
+	notify_device = cpufreq_device;
+
+	for_each_cpu(cpuid, maskPtr) {
+		if (is_cpufreq_valid(cpuid))
+			cpufreq_update_policy(cpuid);
+	}
+
+	notify_device = NOTIFY_INVALID;
+
+	return 0;
+}
+
+/**
+ * cpufreq_thermal_notifier - notifier callback for cpufreq policy change.
+ * @nb:	struct notifier_block * with callback info.
+ * @event: value showing cpufreq event for which this function invoked.
+ * @data: callback-specific data
+ */
+static int cpufreq_thermal_notifier(struct notifier_block *nb,
+					unsigned long event, void *data)
+{
+	struct cpufreq_policy *policy = data;
+	unsigned long max_freq = 0;
+
+	if (event != CPUFREQ_ADJUST || notify_device == NOTIFY_INVALID)
+		return 0;
+
+	if (cpumask_test_cpu(policy->cpu, &notify_device->allowed_cpus))
+		max_freq = notify_device->cpufreq_val;
+
+	/* Never exceed user_policy.max*/
+	if (max_freq > policy->user_policy.max)
+		max_freq = policy->user_policy.max;
+
+	if (policy->max != max_freq)
+		cpufreq_verify_within_limits(policy, 0, max_freq);
+
+	return 0;
+}
+
+/*
+ * cpufreq cooling device callback functions are defined below
+ */
+
+/**
+ * cpufreq_get_max_state - callback function to get the max cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: fill this variable with the max cooling state.
+ */
+static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
+				 unsigned long *state)
+{
+	int ret = -EINVAL, i = 0;
+	struct cpufreq_cooling_device *cpufreq_device;
+	struct cpumask *maskPtr;
+	unsigned int cpu;
+	struct cpufreq_frequency_table *table;
+
+	mutex_lock(&cooling_cpufreq_lock);
+	list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) {
+		if (cpufreq_device && cpufreq_device->cool_dev == cdev)
+			break;
+	}
+	if (cpufreq_device == NULL)
+		goto return_get_max_state;
+
+	maskPtr = &cpufreq_device->allowed_cpus;
+	cpu = cpumask_any(maskPtr);
+	table = cpufreq_frequency_get_table(cpu);
+	if (!table) {
+		*state = 0;
+		ret = 0;
+		goto return_get_max_state;
+	}
+
+	while (table[i].frequency != CPUFREQ_TABLE_END) {
+		if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
+			continue;
+		i++;
+	}
+	if (i > 0) {
+		*state = --i;
+		ret = 0;
+	}
+
+return_get_max_state:
+	mutex_unlock(&cooling_cpufreq_lock);
+	return ret;
+}
+
+/**
+ * cpufreq_get_cur_state - callback function to get the current cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: fill this variable with the current cooling state.
+ */
+static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
+				 unsigned long *state)
+{
+	int ret = -EINVAL;
+	struct cpufreq_cooling_device *cpufreq_device;
+
+	mutex_lock(&cooling_cpufreq_lock);
+	list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) {
+		if (cpufreq_device && cpufreq_device->cool_dev == cdev) {
+			*state = cpufreq_device->cpufreq_state;
+			ret = 0;
+			break;
+		}
+	}
+	mutex_unlock(&cooling_cpufreq_lock);
+
+	return ret;
+}
+
+/**
+ * cpufreq_set_cur_state - callback function to set the current cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: set this variable to the current cooling state.
+ */
+static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
+				 unsigned long state)
+{
+	int ret = -EINVAL;
+	struct cpufreq_cooling_device *cpufreq_device;
+
+	mutex_lock(&cooling_cpufreq_lock);
+	list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) {
+		if (cpufreq_device && cpufreq_device->cool_dev == cdev) {
+			ret = 0;
+			break;
+		}
+	}
+	if (!ret)
+		ret = cpufreq_apply_cooling(cpufreq_device, state);
+
+	mutex_unlock(&cooling_cpufreq_lock);
+
+	return ret;
+}
+
+/* Bind cpufreq callbacks to thermal cooling device ops */
+static struct thermal_cooling_device_ops const cpufreq_cooling_ops = {
+	.get_max_state = cpufreq_get_max_state,
+	.get_cur_state = cpufreq_get_cur_state,
+	.set_cur_state = cpufreq_set_cur_state,
+};
+
+/* Notifier for cpufreq policy change */
+static struct notifier_block thermal_cpufreq_notifier_block = {
+	.notifier_call = cpufreq_thermal_notifier,
+};
+
+/**
+ * cpufreq_cooling_register - function to create cpufreq cooling device.
+ * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ */
+struct thermal_cooling_device *cpufreq_cooling_register(
+	struct cpumask *clip_cpus)
+{
+	struct thermal_cooling_device *cool_dev;
+	struct cpufreq_cooling_device *cpufreq_dev = NULL;
+	unsigned int cpufreq_dev_count = 0, min = 0, max = 0;
+	char dev_name[THERMAL_NAME_LENGTH];
+	int ret = 0, i;
+	struct cpufreq_policy policy;
+
+	list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node)
+		cpufreq_dev_count++;
+
+	/*Verify that all the clip cpus have same freq_min, freq_max limit*/
+	for_each_cpu(i, clip_cpus) {
+		/*continue if cpufreq policy not found and not return error*/
+		if (!cpufreq_get_policy(&policy, i))
+			continue;
+		if (min == 0 && max == 0) {
+			min = policy.cpuinfo.min_freq;
+			max = policy.cpuinfo.max_freq;
+		} else {
+			if (min != policy.cpuinfo.min_freq ||
+				max != policy.cpuinfo.max_freq)
+				return ERR_PTR(-EINVAL);
+}
+	}
+	cpufreq_dev = kzalloc(sizeof(struct cpufreq_cooling_device),
+			GFP_KERNEL);
+	if (!cpufreq_dev)
+		return ERR_PTR(-ENOMEM);
+
+	cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus);
+
+	if (cpufreq_dev_count == 0)
+		mutex_init(&cooling_cpufreq_lock);
+
+	ret = get_idr(&cpufreq_idr, &cpufreq_dev->id);
+	if (ret) {
+		kfree(cpufreq_dev);
+		return ERR_PTR(-EINVAL);
+	}
+
+	sprintf(dev_name, "thermal-cpufreq-%d", cpufreq_dev->id);
+
+	cool_dev = thermal_cooling_device_register(dev_name, cpufreq_dev,
+						&cpufreq_cooling_ops);
+	if (!cool_dev) {
+		release_idr(&cpufreq_idr, cpufreq_dev->id);
+		kfree(cpufreq_dev);
+		return ERR_PTR(-EINVAL);
+	}
+	cpufreq_dev->cool_dev = cool_dev;
+	cpufreq_dev->cpufreq_state = 0;
+	mutex_lock(&cooling_cpufreq_lock);
+	list_add_tail(&cpufreq_dev->node, &cooling_cpufreq_list);
+
+	/* Register the notifier for first cpufreq cooling device */
+	if (cpufreq_dev_count == 0)
+		cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
+						CPUFREQ_POLICY_NOTIFIER);
+
+	mutex_unlock(&cooling_cpufreq_lock);
+	return cool_dev;
+}
+EXPORT_SYMBOL(cpufreq_cooling_register);
+
+/**
+ * cpufreq_cooling_unregister - function to remove cpufreq cooling device.
+ * @cdev: thermal cooling device pointer.
+ */
+void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
+{
+	struct cpufreq_cooling_device *cpufreq_dev = NULL;
+	unsigned int cpufreq_dev_count = 0;
+
+	mutex_lock(&cooling_cpufreq_lock);
+	list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node) {
+		if (cpufreq_dev && cpufreq_dev->cool_dev == cdev)
+			break;
+		cpufreq_dev_count++;
+	}
+
+	if (!cpufreq_dev || cpufreq_dev->cool_dev != cdev) {
+		mutex_unlock(&cooling_cpufreq_lock);
+		return;
+	}
+
+	list_del(&cpufreq_dev->node);
+
+	/* Unregister the notifier for the last cpufreq cooling device */
+	if (cpufreq_dev_count == 1) {
+		cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
+					CPUFREQ_POLICY_NOTIFIER);
+	}
+	mutex_unlock(&cooling_cpufreq_lock);
+	thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
+	release_idr(&cpufreq_idr, cpufreq_dev->id);
+	if (cpufreq_dev_count == 1)
+		mutex_destroy(&cooling_cpufreq_lock);
+	kfree(cpufreq_dev);
+}
+EXPORT_SYMBOL(cpufreq_cooling_unregister);
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
new file mode 100644
index 0000000..fd03e85
--- /dev/null
+++ b/drivers/thermal/exynos_thermal.c
@@ -0,0 +1,997 @@
+/*
+ * exynos_thermal.c - Samsung EXYNOS TMU (Thermal Management Unit)
+ *
+ *  Copyright (C) 2011 Samsung Electronics
+ *  Donggeun Kim <dg77.kim@samsung.com>
+ *  Amit Daniel Kachhap <amit.kachhap@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/workqueue.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/platform_data/exynos_thermal.h>
+#include <linux/thermal.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
+#include <linux/of.h>
+
+#include <plat/cpu.h>
+
+/* Exynos generic registers */
+#define EXYNOS_TMU_REG_TRIMINFO		0x0
+#define EXYNOS_TMU_REG_CONTROL		0x20
+#define EXYNOS_TMU_REG_STATUS		0x28
+#define EXYNOS_TMU_REG_CURRENT_TEMP	0x40
+#define EXYNOS_TMU_REG_INTEN		0x70
+#define EXYNOS_TMU_REG_INTSTAT		0x74
+#define EXYNOS_TMU_REG_INTCLEAR		0x78
+
+#define EXYNOS_TMU_TRIM_TEMP_MASK	0xff
+#define EXYNOS_TMU_GAIN_SHIFT		8
+#define EXYNOS_TMU_REF_VOLTAGE_SHIFT	24
+#define EXYNOS_TMU_CORE_ON		3
+#define EXYNOS_TMU_CORE_OFF		2
+#define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET	50
+
+/* Exynos4210 specific registers */
+#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP	0x44
+#define EXYNOS4210_TMU_REG_TRIG_LEVEL0	0x50
+#define EXYNOS4210_TMU_REG_TRIG_LEVEL1	0x54
+#define EXYNOS4210_TMU_REG_TRIG_LEVEL2	0x58
+#define EXYNOS4210_TMU_REG_TRIG_LEVEL3	0x5C
+#define EXYNOS4210_TMU_REG_PAST_TEMP0	0x60
+#define EXYNOS4210_TMU_REG_PAST_TEMP1	0x64
+#define EXYNOS4210_TMU_REG_PAST_TEMP2	0x68
+#define EXYNOS4210_TMU_REG_PAST_TEMP3	0x6C
+
+#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK	0x1
+#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK	0x10
+#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK	0x100
+#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK	0x1000
+#define EXYNOS4210_TMU_INTCLEAR_VAL	0x1111
+
+/* Exynos5250 and Exynos4412 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON	0x14
+#define EXYNOS_THD_TEMP_RISE		0x50
+#define EXYNOS_THD_TEMP_FALL		0x54
+#define EXYNOS_EMUL_CON		0x80
+
+#define EXYNOS_TRIMINFO_RELOAD		0x1
+#define EXYNOS_TMU_CLEAR_RISE_INT	0x111
+#define EXYNOS_TMU_CLEAR_FALL_INT	(0x111 << 16)
+#define EXYNOS_MUX_ADDR_VALUE		6
+#define EXYNOS_MUX_ADDR_SHIFT		20
+#define EXYNOS_TMU_TRIP_MODE_SHIFT	13
+
+#define EFUSE_MIN_VALUE 40
+#define EFUSE_MAX_VALUE 100
+
+/* In-kernel thermal framework related macros & definations */
+#define SENSOR_NAME_LEN	16
+#define MAX_TRIP_COUNT	8
+#define MAX_COOLING_DEVICE 4
+
+#define ACTIVE_INTERVAL 500
+#define IDLE_INTERVAL 10000
+#define MCELSIUS	1000
+
+/* CPU Zone information */
+#define PANIC_ZONE      4
+#define WARN_ZONE       3
+#define MONITOR_ZONE    2
+#define SAFE_ZONE       1
+
+#define GET_ZONE(trip) (trip + 2)
+#define GET_TRIP(zone) (zone - 2)
+
+#define EXYNOS_ZONE_COUNT	3
+
+struct exynos_tmu_data {
+	struct exynos_tmu_platform_data *pdata;
+	struct resource *mem;
+	void __iomem *base;
+	int irq;
+	enum soc_type soc;
+	struct work_struct irq_work;
+	struct mutex lock;
+	struct clk *clk;
+	u8 temp_error1, temp_error2;
+};
+
+struct	thermal_trip_point_conf {
+	int trip_val[MAX_TRIP_COUNT];
+	int trip_count;
+};
+
+struct	thermal_cooling_conf {
+	struct freq_clip_table freq_data[MAX_TRIP_COUNT];
+	int freq_clip_count;
+};
+
+struct thermal_sensor_conf {
+	char name[SENSOR_NAME_LEN];
+	int (*read_temperature)(void *data);
+	struct thermal_trip_point_conf trip_data;
+	struct thermal_cooling_conf cooling_data;
+	void *private_data;
+};
+
+struct exynos_thermal_zone {
+	enum thermal_device_mode mode;
+	struct thermal_zone_device *therm_dev;
+	struct thermal_cooling_device *cool_dev[MAX_COOLING_DEVICE];
+	unsigned int cool_dev_size;
+	struct platform_device *exynos4_dev;
+	struct thermal_sensor_conf *sensor_conf;
+	bool bind;
+};
+
+static struct exynos_thermal_zone *th_zone;
+static void exynos_unregister_thermal(void);
+static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
+
+/* Get mode callback functions for thermal zone */
+static int exynos_get_mode(struct thermal_zone_device *thermal,
+			enum thermal_device_mode *mode)
+{
+	if (th_zone)
+		*mode = th_zone->mode;
+	return 0;
+}
+
+/* Set mode callback functions for thermal zone */
+static int exynos_set_mode(struct thermal_zone_device *thermal,
+			enum thermal_device_mode mode)
+{
+	if (!th_zone->therm_dev) {
+		pr_notice("thermal zone not registered\n");
+		return 0;
+	}
+
+	mutex_lock(&th_zone->therm_dev->lock);
+
+	if (mode == THERMAL_DEVICE_ENABLED)
+		th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
+	else
+		th_zone->therm_dev->polling_delay = 0;
+
+	mutex_unlock(&th_zone->therm_dev->lock);
+
+	th_zone->mode = mode;
+	thermal_zone_device_update(th_zone->therm_dev);
+	pr_info("thermal polling set for duration=%d msec\n",
+				th_zone->therm_dev->polling_delay);
+	return 0;
+}
+
+
+/* Get trip type callback functions for thermal zone */
+static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
+				 enum thermal_trip_type *type)
+{
+	switch (GET_ZONE(trip)) {
+	case MONITOR_ZONE:
+	case WARN_ZONE:
+		*type = THERMAL_TRIP_ACTIVE;
+		break;
+	case PANIC_ZONE:
+		*type = THERMAL_TRIP_CRITICAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* Get trip temperature callback functions for thermal zone */
+static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
+				unsigned long *temp)
+{
+	if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
+		return -EINVAL;
+
+	*temp = th_zone->sensor_conf->trip_data.trip_val[trip];
+	/* convert the temperature into millicelsius */
+	*temp = *temp * MCELSIUS;
+
+	return 0;
+}
+
+/* Get critical temperature callback functions for thermal zone */
+static int exynos_get_crit_temp(struct thermal_zone_device *thermal,
+				unsigned long *temp)
+{
+	int ret;
+	/* Panic zone */
+	ret = exynos_get_trip_temp(thermal, GET_TRIP(PANIC_ZONE), temp);
+	return ret;
+}
+
+static int exynos_get_frequency_level(unsigned int cpu, unsigned int freq)
+{
+	int i = 0, ret = -EINVAL;
+	struct cpufreq_frequency_table *table = NULL;
+#ifdef CONFIG_CPU_FREQ
+	table = cpufreq_frequency_get_table(cpu);
+#endif
+	if (!table)
+		return ret;
+
+	while (table[i].frequency != CPUFREQ_TABLE_END) {
+		if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
+			continue;
+		if (table[i].frequency == freq)
+			return i;
+		i++;
+	}
+	return ret;
+}
+
+/* Bind callback functions for thermal zone */
+static int exynos_bind(struct thermal_zone_device *thermal,
+			struct thermal_cooling_device *cdev)
+{
+	int ret = 0, i, tab_size, level;
+	struct freq_clip_table *tab_ptr, *clip_data;
+	struct thermal_sensor_conf *data = th_zone->sensor_conf;
+
+	tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
+	tab_size = data->cooling_data.freq_clip_count;
+
+	if (tab_ptr == NULL || tab_size == 0)
+		return -EINVAL;
+
+	/* find the cooling device registered*/
+	for (i = 0; i < th_zone->cool_dev_size; i++)
+		if (cdev == th_zone->cool_dev[i])
+			break;
+
+	/* No matching cooling device */
+	if (i == th_zone->cool_dev_size)
+		return 0;
+
+	/* Bind the thermal zone to the cpufreq cooling device */
+	for (i = 0; i < tab_size; i++) {
+		clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
+		level = exynos_get_frequency_level(0, clip_data->freq_clip_max);
+		if (level < 0)
+			return 0;
+		switch (GET_ZONE(i)) {
+		case MONITOR_ZONE:
+		case WARN_ZONE:
+			if (thermal_zone_bind_cooling_device(thermal, i, cdev,
+								level, level)) {
+				pr_err("error binding cdev inst %d\n", i);
+				ret = -EINVAL;
+			}
+			th_zone->bind = true;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+	}
+
+	return ret;
+}
+
+/* Unbind callback functions for thermal zone */
+static int exynos_unbind(struct thermal_zone_device *thermal,
+			struct thermal_cooling_device *cdev)
+{
+	int ret = 0, i, tab_size;
+	struct thermal_sensor_conf *data = th_zone->sensor_conf;
+
+	if (th_zone->bind == false)
+		return 0;
+
+	tab_size = data->cooling_data.freq_clip_count;
+
+	if (tab_size == 0)
+		return -EINVAL;
+
+	/* find the cooling device registered*/
+	for (i = 0; i < th_zone->cool_dev_size; i++)
+		if (cdev == th_zone->cool_dev[i])
+			break;
+
+	/* No matching cooling device */
+	if (i == th_zone->cool_dev_size)
+		return 0;
+
+	/* Bind the thermal zone to the cpufreq cooling device */
+	for (i = 0; i < tab_size; i++) {
+		switch (GET_ZONE(i)) {
+		case MONITOR_ZONE:
+		case WARN_ZONE:
+			if (thermal_zone_unbind_cooling_device(thermal, i,
+								cdev)) {
+				pr_err("error unbinding cdev inst=%d\n", i);
+				ret = -EINVAL;
+			}
+			th_zone->bind = false;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+	}
+	return ret;
+}
+
+/* Get temperature callback functions for thermal zone */
+static int exynos_get_temp(struct thermal_zone_device *thermal,
+			unsigned long *temp)
+{
+	void *data;
+
+	if (!th_zone->sensor_conf) {
+		pr_info("Temperature sensor not initialised\n");
+		return -EINVAL;
+	}
+	data = th_zone->sensor_conf->private_data;
+	*temp = th_zone->sensor_conf->read_temperature(data);
+	/* convert the temperature into millicelsius */
+	*temp = *temp * MCELSIUS;
+	return 0;
+}
+
+/* Get the temperature trend */
+static int exynos_get_trend(struct thermal_zone_device *thermal,
+			int trip, enum thermal_trend *trend)
+{
+	if (thermal->temperature >= trip)
+		*trend = THERMAL_TREND_RAISING;
+	else
+		*trend = THERMAL_TREND_DROPPING;
+
+	return 0;
+}
+/* Operation callback functions for thermal zone */
+static struct thermal_zone_device_ops const exynos_dev_ops = {
+	.bind = exynos_bind,
+	.unbind = exynos_unbind,
+	.get_temp = exynos_get_temp,
+	.get_trend = exynos_get_trend,
+	.get_mode = exynos_get_mode,
+	.set_mode = exynos_set_mode,
+	.get_trip_type = exynos_get_trip_type,
+	.get_trip_temp = exynos_get_trip_temp,
+	.get_crit_temp = exynos_get_crit_temp,
+};
+
+/*
+ * This function may be called from interrupt based temperature sensor
+ * when threshold is changed.
+ */
+static void exynos_report_trigger(void)
+{
+	unsigned int i;
+	char data[10];
+	char *envp[] = { data, NULL };
+
+	if (!th_zone || !th_zone->therm_dev)
+		return;
+	if (th_zone->bind == false) {
+		for (i = 0; i < th_zone->cool_dev_size; i++) {
+			if (!th_zone->cool_dev[i])
+				continue;
+			exynos_bind(th_zone->therm_dev,
+					th_zone->cool_dev[i]);
+		}
+	}
+
+	thermal_zone_device_update(th_zone->therm_dev);
+
+	mutex_lock(&th_zone->therm_dev->lock);
+	/* Find the level for which trip happened */
+	for (i = 0; i < th_zone->sensor_conf->trip_data.trip_count; i++) {
+		if (th_zone->therm_dev->last_temperature <
+			th_zone->sensor_conf->trip_data.trip_val[i] * MCELSIUS)
+			break;
+	}
+
+	if (th_zone->mode == THERMAL_DEVICE_ENABLED) {
+		if (i > 0)
+			th_zone->therm_dev->polling_delay = ACTIVE_INTERVAL;
+		else
+			th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
+	}
+
+	snprintf(data, sizeof(data), "%u", i);
+	kobject_uevent_env(&th_zone->therm_dev->device.kobj, KOBJ_CHANGE, envp);
+	mutex_unlock(&th_zone->therm_dev->lock);
+}
+
+/* Register with the in-kernel thermal management */
+static int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
+{
+	int ret;
+	struct cpumask mask_val;
+
+	if (!sensor_conf || !sensor_conf->read_temperature) {
+		pr_err("Temperature sensor not initialised\n");
+		return -EINVAL;
+	}
+
+	th_zone = kzalloc(sizeof(struct exynos_thermal_zone), GFP_KERNEL);
+	if (!th_zone)
+		return -ENOMEM;
+
+	th_zone->sensor_conf = sensor_conf;
+	cpumask_set_cpu(0, &mask_val);
+	th_zone->cool_dev[0] = cpufreq_cooling_register(&mask_val);
+	if (IS_ERR(th_zone->cool_dev[0])) {
+		pr_err("Failed to register cpufreq cooling device\n");
+		ret = -EINVAL;
+		goto err_unregister;
+	}
+	th_zone->cool_dev_size++;
+
+	th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
+			EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, 0,
+			IDLE_INTERVAL);
+
+	if (IS_ERR(th_zone->therm_dev)) {
+		pr_err("Failed to register thermal zone device\n");
+		ret = -EINVAL;
+		goto err_unregister;
+	}
+	th_zone->mode = THERMAL_DEVICE_ENABLED;
+
+	pr_info("Exynos: Kernel Thermal management registered\n");
+
+	return 0;
+
+err_unregister:
+	exynos_unregister_thermal();
+	return ret;
+}
+
+/* Un-Register with the in-kernel thermal management */
+static void exynos_unregister_thermal(void)
+{
+	int i;
+
+	if (!th_zone)
+		return;
+
+	if (th_zone->therm_dev)
+		thermal_zone_device_unregister(th_zone->therm_dev);
+
+	for (i = 0; i < th_zone->cool_dev_size; i++) {
+		if (th_zone->cool_dev[i])
+			cpufreq_cooling_unregister(th_zone->cool_dev[i]);
+	}
+
+	kfree(th_zone);
+	pr_info("Exynos: Kernel Thermal management unregistered\n");
+}
+
+/*
+ * TMU treats temperature as a mapped temperature code.
+ * The temperature is converted differently depending on the calibration type.
+ */
+static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
+{
+	struct exynos_tmu_platform_data *pdata = data->pdata;
+	int temp_code;
+
+	if (data->soc == SOC_ARCH_EXYNOS4210)
+		/* temp should range between 25 and 125 */
+		if (temp < 25 || temp > 125) {
+			temp_code = -EINVAL;
+			goto out;
+		}
+
+	switch (pdata->cal_type) {
+	case TYPE_TWO_POINT_TRIMMING:
+		temp_code = (temp - 25) *
+		    (data->temp_error2 - data->temp_error1) /
+		    (85 - 25) + data->temp_error1;
+		break;
+	case TYPE_ONE_POINT_TRIMMING:
+		temp_code = temp + data->temp_error1 - 25;
+		break;
+	default:
+		temp_code = temp + EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET;
+		break;
+	}
+out:
+	return temp_code;
+}
+
+/*
+ * Calculate a temperature value from a temperature code.
+ * The unit of the temperature is degree Celsius.
+ */
+static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
+{
+	struct exynos_tmu_platform_data *pdata = data->pdata;
+	int temp;
+
+	if (data->soc == SOC_ARCH_EXYNOS4210)
+		/* temp_code should range between 75 and 175 */
+		if (temp_code < 75 || temp_code > 175) {
+			temp = -ENODATA;
+			goto out;
+		}
+
+	switch (pdata->cal_type) {
+	case TYPE_TWO_POINT_TRIMMING:
+		temp = (temp_code - data->temp_error1) * (85 - 25) /
+		    (data->temp_error2 - data->temp_error1) + 25;
+		break;
+	case TYPE_ONE_POINT_TRIMMING:
+		temp = temp_code - data->temp_error1 + 25;
+		break;
+	default:
+		temp = temp_code - EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET;
+		break;
+	}
+out:
+	return temp;
+}
+
+static int exynos_tmu_initialize(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct exynos_tmu_platform_data *pdata = data->pdata;
+	unsigned int status, trim_info, rising_threshold;
+	int ret = 0, threshold_code;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	status = readb(data->base + EXYNOS_TMU_REG_STATUS);
+	if (!status) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	if (data->soc == SOC_ARCH_EXYNOS) {
+		__raw_writel(EXYNOS_TRIMINFO_RELOAD,
+				data->base + EXYNOS_TMU_TRIMINFO_CON);
+	}
+	/* Save trimming info in order to perform calibration */
+	trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
+	data->temp_error1 = trim_info & EXYNOS_TMU_TRIM_TEMP_MASK;
+	data->temp_error2 = ((trim_info >> 8) & EXYNOS_TMU_TRIM_TEMP_MASK);
+
+	if ((EFUSE_MIN_VALUE > data->temp_error1) ||
+			(data->temp_error1 > EFUSE_MAX_VALUE) ||
+			(data->temp_error2 != 0))
+		data->temp_error1 = pdata->efuse_value;
+
+	if (data->soc == SOC_ARCH_EXYNOS4210) {
+		/* Write temperature code for threshold */
+		threshold_code = temp_to_code(data, pdata->threshold);
+		if (threshold_code < 0) {
+			ret = threshold_code;
+			goto out;
+		}
+		writeb(threshold_code,
+			data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
+
+		writeb(pdata->trigger_levels[0],
+			data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0);
+		writeb(pdata->trigger_levels[1],
+			data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL1);
+		writeb(pdata->trigger_levels[2],
+			data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL2);
+		writeb(pdata->trigger_levels[3],
+			data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL3);
+
+		writel(EXYNOS4210_TMU_INTCLEAR_VAL,
+			data->base + EXYNOS_TMU_REG_INTCLEAR);
+	} else if (data->soc == SOC_ARCH_EXYNOS) {
+		/* Write temperature code for threshold */
+		threshold_code = temp_to_code(data, pdata->trigger_levels[0]);
+		if (threshold_code < 0) {
+			ret = threshold_code;
+			goto out;
+		}
+		rising_threshold = threshold_code;
+		threshold_code = temp_to_code(data, pdata->trigger_levels[1]);
+		if (threshold_code < 0) {
+			ret = threshold_code;
+			goto out;
+		}
+		rising_threshold |= (threshold_code << 8);
+		threshold_code = temp_to_code(data, pdata->trigger_levels[2]);
+		if (threshold_code < 0) {
+			ret = threshold_code;
+			goto out;
+		}
+		rising_threshold |= (threshold_code << 16);
+
+		writel(rising_threshold,
+				data->base + EXYNOS_THD_TEMP_RISE);
+		writel(0, data->base + EXYNOS_THD_TEMP_FALL);
+
+		writel(EXYNOS_TMU_CLEAR_RISE_INT|EXYNOS_TMU_CLEAR_FALL_INT,
+				data->base + EXYNOS_TMU_REG_INTCLEAR);
+	}
+out:
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static void exynos_tmu_control(struct platform_device *pdev, bool on)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+	struct exynos_tmu_platform_data *pdata = data->pdata;
+	unsigned int con, interrupt_en;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	con = pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT |
+		pdata->gain << EXYNOS_TMU_GAIN_SHIFT;
+
+	if (data->soc == SOC_ARCH_EXYNOS) {
+		con |= pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT;
+		con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT);
+	}
+
+	if (on) {
+		con |= EXYNOS_TMU_CORE_ON;
+		interrupt_en = pdata->trigger_level3_en << 12 |
+			pdata->trigger_level2_en << 8 |
+			pdata->trigger_level1_en << 4 |
+			pdata->trigger_level0_en;
+	} else {
+		con |= EXYNOS_TMU_CORE_OFF;
+		interrupt_en = 0; /* Disable all interrupts */
+	}
+	writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
+	writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+}
+
+static int exynos_tmu_read(struct exynos_tmu_data *data)
+{
+	u8 temp_code;
+	int temp;
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+	temp_code = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
+	temp = code_to_temp(data, temp_code);
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+
+	return temp;
+}
+
+static void exynos_tmu_work(struct work_struct *work)
+{
+	struct exynos_tmu_data *data = container_of(work,
+			struct exynos_tmu_data, irq_work);
+
+	mutex_lock(&data->lock);
+	clk_enable(data->clk);
+
+
+	if (data->soc == SOC_ARCH_EXYNOS)
+		writel(EXYNOS_TMU_CLEAR_RISE_INT,
+				data->base + EXYNOS_TMU_REG_INTCLEAR);
+	else
+		writel(EXYNOS4210_TMU_INTCLEAR_VAL,
+				data->base + EXYNOS_TMU_REG_INTCLEAR);
+
+	clk_disable(data->clk);
+	mutex_unlock(&data->lock);
+	exynos_report_trigger();
+	enable_irq(data->irq);
+}
+
+static irqreturn_t exynos_tmu_irq(int irq, void *id)
+{
+	struct exynos_tmu_data *data = id;
+
+	disable_irq_nosync(irq);
+	schedule_work(&data->irq_work);
+
+	return IRQ_HANDLED;
+}
+static struct thermal_sensor_conf exynos_sensor_conf = {
+	.name			= "exynos-therm",
+	.read_temperature	= (int (*)(void *))exynos_tmu_read,
+};
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+static struct exynos_tmu_platform_data const exynos4210_default_tmu_data = {
+	.threshold = 80,
+	.trigger_levels[0] = 5,
+	.trigger_levels[1] = 20,
+	.trigger_levels[2] = 30,
+	.trigger_level0_en = 1,
+	.trigger_level1_en = 1,
+	.trigger_level2_en = 1,
+	.trigger_level3_en = 0,
+	.gain = 15,
+	.reference_voltage = 7,
+	.cal_type = TYPE_ONE_POINT_TRIMMING,
+	.freq_tab[0] = {
+		.freq_clip_max = 800 * 1000,
+		.temp_level = 85,
+	},
+	.freq_tab[1] = {
+		.freq_clip_max = 200 * 1000,
+		.temp_level = 100,
+	},
+	.freq_tab_count = 2,
+	.type = SOC_ARCH_EXYNOS4210,
+};
+#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
+#else
+#define EXYNOS4210_TMU_DRV_DATA (NULL)
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)
+static struct exynos_tmu_platform_data const exynos_default_tmu_data = {
+	.trigger_levels[0] = 85,
+	.trigger_levels[1] = 103,
+	.trigger_levels[2] = 110,
+	.trigger_level0_en = 1,
+	.trigger_level1_en = 1,
+	.trigger_level2_en = 1,
+	.trigger_level3_en = 0,
+	.gain = 8,
+	.reference_voltage = 16,
+	.noise_cancel_mode = 4,
+	.cal_type = TYPE_ONE_POINT_TRIMMING,
+	.efuse_value = 55,
+	.freq_tab[0] = {
+		.freq_clip_max = 800 * 1000,
+		.temp_level = 85,
+	},
+	.freq_tab[1] = {
+		.freq_clip_max = 200 * 1000,
+		.temp_level = 103,
+	},
+	.freq_tab_count = 2,
+	.type = SOC_ARCH_EXYNOS,
+};
+#define EXYNOS_TMU_DRV_DATA (&exynos_default_tmu_data)
+#else
+#define EXYNOS_TMU_DRV_DATA (NULL)
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id exynos_tmu_match[] = {
+	{
+		.compatible = "samsung,exynos4210-tmu",
+		.data = (void *)EXYNOS4210_TMU_DRV_DATA,
+	},
+	{
+		.compatible = "samsung,exynos5250-tmu",
+		.data = (void *)EXYNOS_TMU_DRV_DATA,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_tmu_match);
+#else
+#define  exynos_tmu_match NULL
+#endif
+
+static struct platform_device_id exynos_tmu_driver_ids[] = {
+	{
+		.name		= "exynos4210-tmu",
+		.driver_data    = (kernel_ulong_t)EXYNOS4210_TMU_DRV_DATA,
+	},
+	{
+		.name		= "exynos5250-tmu",
+		.driver_data    = (kernel_ulong_t)EXYNOS_TMU_DRV_DATA,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, exynos4_tmu_driver_ids);
+
+static inline struct  exynos_tmu_platform_data *exynos_get_driver_data(
+			struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
+		if (!match)
+			return NULL;
+		return (struct exynos_tmu_platform_data *) match->data;
+	}
+#endif
+	return (struct exynos_tmu_platform_data *)
+			platform_get_device_id(pdev)->driver_data;
+}
+static int __devinit exynos_tmu_probe(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data;
+	struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data;
+	int ret, i;
+
+	if (!pdata)
+		pdata = exynos_get_driver_data(pdev);
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform init data supplied.\n");
+		return -ENODEV;
+	}
+	data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
+					GFP_KERNEL);
+	if (!data) {
+		dev_err(&pdev->dev, "Failed to allocate driver structure\n");
+		return -ENOMEM;
+	}
+
+	data->irq = platform_get_irq(pdev, 0);
+	if (data->irq < 0) {
+		dev_err(&pdev->dev, "Failed to get platform irq\n");
+		return data->irq;
+	}
+
+	INIT_WORK(&data->irq_work, exynos_tmu_work);
+
+	data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!data->mem) {
+		dev_err(&pdev->dev, "Failed to get platform resource\n");
+		return -ENOENT;
+	}
+
+	data->base = devm_request_and_ioremap(&pdev->dev, data->mem);
+	if (!data->base) {
+		dev_err(&pdev->dev, "Failed to ioremap memory\n");
+		return -ENODEV;
+	}
+
+	ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
+		IRQF_TRIGGER_RISING, "exynos-tmu", data);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
+		return ret;
+	}
+
+	data->clk = clk_get(NULL, "tmu_apbif");
+	if (IS_ERR(data->clk)) {
+		dev_err(&pdev->dev, "Failed to get clock\n");
+		return  PTR_ERR(data->clk);
+	}
+
+	if (pdata->type == SOC_ARCH_EXYNOS ||
+				pdata->type == SOC_ARCH_EXYNOS4210)
+		data->soc = pdata->type;
+	else {
+		ret = -EINVAL;
+		dev_err(&pdev->dev, "Platform not supported\n");
+		goto err_clk;
+	}
+
+	data->pdata = pdata;
+	platform_set_drvdata(pdev, data);
+	mutex_init(&data->lock);
+
+	ret = exynos_tmu_initialize(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to initialize TMU\n");
+		goto err_clk;
+	}
+
+	exynos_tmu_control(pdev, true);
+
+	/* Register the sensor with thermal management interface */
+	(&exynos_sensor_conf)->private_data = data;
+	exynos_sensor_conf.trip_data.trip_count = pdata->trigger_level0_en +
+			pdata->trigger_level1_en + pdata->trigger_level2_en +
+			pdata->trigger_level3_en;
+
+	for (i = 0; i < exynos_sensor_conf.trip_data.trip_count; i++)
+		exynos_sensor_conf.trip_data.trip_val[i] =
+			pdata->threshold + pdata->trigger_levels[i];
+
+	exynos_sensor_conf.cooling_data.freq_clip_count =
+						pdata->freq_tab_count;
+	for (i = 0; i < pdata->freq_tab_count; i++) {
+		exynos_sensor_conf.cooling_data.freq_data[i].freq_clip_max =
+					pdata->freq_tab[i].freq_clip_max;
+		exynos_sensor_conf.cooling_data.freq_data[i].temp_level =
+					pdata->freq_tab[i].temp_level;
+	}
+
+	ret = exynos_register_thermal(&exynos_sensor_conf);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register thermal interface\n");
+		goto err_clk;
+	}
+	return 0;
+err_clk:
+	platform_set_drvdata(pdev, NULL);
+	clk_put(data->clk);
+	return ret;
+}
+
+static int __devexit exynos_tmu_remove(struct platform_device *pdev)
+{
+	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+
+	exynos_tmu_control(pdev, false);
+
+	exynos_unregister_thermal();
+
+	clk_put(data->clk);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_tmu_suspend(struct device *dev)
+{
+	exynos_tmu_control(to_platform_device(dev), false);
+
+	return 0;
+}
+
+static int exynos_tmu_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	exynos_tmu_initialize(pdev);
+	exynos_tmu_control(pdev, true);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(exynos_tmu_pm,
+			 exynos_tmu_suspend, exynos_tmu_resume);
+#define EXYNOS_TMU_PM	(&exynos_tmu_pm)
+#else
+#define EXYNOS_TMU_PM	NULL
+#endif
+
+static struct platform_driver exynos_tmu_driver = {
+	.driver = {
+		.name   = "exynos-tmu",
+		.owner  = THIS_MODULE,
+		.pm     = EXYNOS_TMU_PM,
+		.of_match_table = exynos_tmu_match,
+	},
+	.probe = exynos_tmu_probe,
+	.remove	= __devexit_p(exynos_tmu_remove),
+	.id_table = exynos_tmu_driver_ids,
+};
+
+module_platform_driver(exynos_tmu_driver);
+
+MODULE_DESCRIPTION("EXYNOS TMU Driver");
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:exynos-tmu");
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
new file mode 100644
index 0000000..d445271
--- /dev/null
+++ b/drivers/thermal/rcar_thermal.c
@@ -0,0 +1,260 @@
+/*
+ *  R-Car THS/TSC thermal sensor driver
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/thermal.h>
+
+#define THSCR	0x2c
+#define THSSR	0x30
+
+/* THSCR */
+#define CPTAP	0xf
+
+/* THSSR */
+#define CTEMP	0x3f
+
+
+struct rcar_thermal_priv {
+	void __iomem *base;
+	struct device *dev;
+	spinlock_t lock;
+	u32 comp;
+};
+
+/*
+ *		basic functions
+ */
+static u32 rcar_thermal_read(struct rcar_thermal_priv *priv, u32 reg)
+{
+	unsigned long flags;
+	u32 ret;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	ret = ioread32(priv->base + reg);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return ret;
+}
+
+#if 0 /* no user at this point */
+static void rcar_thermal_write(struct rcar_thermal_priv *priv,
+			       u32 reg, u32 data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	iowrite32(data, priv->base + reg);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+#endif
+
+static void rcar_thermal_bset(struct rcar_thermal_priv *priv, u32 reg,
+			      u32 mask, u32 data)
+{
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	val = ioread32(priv->base + reg);
+	val &= ~mask;
+	val |= (data & mask);
+	iowrite32(val, priv->base + reg);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+/*
+ *		zone device functions
+ */
+static int rcar_thermal_get_temp(struct thermal_zone_device *zone,
+			   unsigned long *temp)
+{
+	struct rcar_thermal_priv *priv = zone->devdata;
+	int val, min, max, tmp;
+
+	tmp = -200; /* default */
+	while (1) {
+		if (priv->comp < 1 || priv->comp > 12) {
+			dev_err(priv->dev,
+				"THSSR invalid data (%d)\n", priv->comp);
+			priv->comp = 4; /* for next thermal */
+			return -EINVAL;
+		}
+
+		/*
+		 * THS comparator offset and the reference temperature
+		 *
+		 * Comparator	| reference	| Temperature field
+		 * offset	| temperature	| measurement
+		 *		| (degrees C)	| (degrees C)
+		 * -------------+---------------+-------------------
+		 *  1		|  -45		|  -45 to  -30
+		 *  2		|  -30		|  -30 to  -15
+		 *  3		|  -15		|  -15 to    0
+		 *  4		|    0		|    0 to  +15
+		 *  5		|  +15		|  +15 to  +30
+		 *  6		|  +30		|  +30 to  +45
+		 *  7		|  +45		|  +45 to  +60
+		 *  8		|  +60		|  +60 to  +75
+		 *  9		|  +75		|  +75 to  +90
+		 * 10		|  +90		|  +90 to +105
+		 * 11		| +105		| +105 to +120
+		 * 12		| +120		| +120 to +135
+		 */
+
+		/* calculate thermal limitation */
+		min = (priv->comp * 15) - 60;
+		max = min + 15;
+
+		/*
+		 * we need to wait 300us after changing comparator offset
+		 * to get stable temperature.
+		 * see "Usage Notes" on datasheet
+		 */
+		rcar_thermal_bset(priv, THSCR, CPTAP, priv->comp);
+		udelay(300);
+
+		/* calculate current temperature */
+		val = rcar_thermal_read(priv, THSSR) & CTEMP;
+		val = (val * 5) - 65;
+
+		dev_dbg(priv->dev, "comp/min/max/val = %d/%d/%d/%d\n",
+			priv->comp, min, max, val);
+
+		/*
+		 * If val is same as min/max, then,
+		 * it should try again on next comparator.
+		 * But the val might be correct temperature.
+		 * Keep it on "tmp" and compare with next val.
+		 */
+		if (tmp == val)
+			break;
+
+		if (val <= min) {
+			tmp = min;
+			priv->comp--; /* try again */
+		} else if (val >= max) {
+			tmp = max;
+			priv->comp++; /* try again */
+		} else {
+			tmp = val;
+			break;
+		}
+	}
+
+	*temp = tmp;
+	return 0;
+}
+
+static struct thermal_zone_device_ops rcar_thermal_zone_ops = {
+	.get_temp = rcar_thermal_get_temp,
+};
+
+/*
+ *		platform functions
+ */
+static int rcar_thermal_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *zone;
+	struct rcar_thermal_priv *priv;
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Could not get platform resource\n");
+		return -ENODEV;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&pdev->dev, "Could not allocate priv\n");
+		return -ENOMEM;
+	}
+
+	priv->comp = 4; /* basic setup */
+	priv->dev = &pdev->dev;
+	spin_lock_init(&priv->lock);
+	priv->base = devm_ioremap_nocache(&pdev->dev,
+					  res->start, resource_size(res));
+	if (!priv->base) {
+		dev_err(&pdev->dev, "Unable to ioremap thermal register\n");
+		ret = -ENOMEM;
+		goto error_free_priv;
+	}
+
+	zone = thermal_zone_device_register("rcar_thermal", 0, priv,
+					    &rcar_thermal_zone_ops, 0, 0);
+	if (IS_ERR(zone)) {
+		dev_err(&pdev->dev, "thermal zone device is NULL\n");
+		ret = PTR_ERR(zone);
+		goto error_iounmap;
+	}
+
+	platform_set_drvdata(pdev, zone);
+
+	dev_info(&pdev->dev, "proved\n");
+
+	return 0;
+
+error_iounmap:
+	devm_iounmap(&pdev->dev, priv->base);
+error_free_priv:
+	devm_kfree(&pdev->dev, priv);
+
+	return ret;
+}
+
+static int rcar_thermal_remove(struct platform_device *pdev)
+{
+	struct thermal_zone_device *zone = platform_get_drvdata(pdev);
+	struct rcar_thermal_priv *priv = zone->devdata;
+
+	thermal_zone_device_unregister(zone);
+	platform_set_drvdata(pdev, NULL);
+
+	devm_iounmap(&pdev->dev, priv->base);
+	devm_kfree(&pdev->dev, priv);
+
+	return 0;
+}
+
+static struct platform_driver rcar_thermal_driver = {
+	.driver	= {
+		.name	= "rcar_thermal",
+	},
+	.probe		= rcar_thermal_probe,
+	.remove		= rcar_thermal_remove,
+};
+module_platform_driver(rcar_thermal_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("R-Car THS/TSC thermal sensor driver");
+MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c
index 5f8ee39..9bc9692 100644
--- a/drivers/thermal/spear_thermal.c
+++ b/drivers/thermal/spear_thermal.c
@@ -147,7 +147,7 @@
 	writel_relaxed(stdev->flags, stdev->thermal_base);
 
 	spear_thermal = thermal_zone_device_register("spear_thermal", 0, 0,
-				stdev, &ops, 0, 0, 0, 0);
+				stdev, &ops, 0, 0);
 	if (IS_ERR(spear_thermal)) {
 		dev_err(&pdev->dev, "thermal zone device is NULL\n");
 		ret = PTR_ERR(spear_thermal);
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index efd81bb..9ee42ca 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -41,15 +41,25 @@
 MODULE_DESCRIPTION("Generic thermal management sysfs support");
 MODULE_LICENSE("GPL");
 
-struct thermal_cooling_device_instance {
+#define THERMAL_NO_TARGET -1UL
+/*
+ * This structure is used to describe the behavior of
+ * a certain cooling device on a certain trip point
+ * in a certain thermal zone
+ */
+struct thermal_instance {
 	int id;
 	char name[THERMAL_NAME_LENGTH];
 	struct thermal_zone_device *tz;
 	struct thermal_cooling_device *cdev;
 	int trip;
+	unsigned long upper;	/* Highest cooling state for this trip point */
+	unsigned long lower;	/* Lowest cooling state for this trip point */
+	unsigned long target;	/* expected cooling state */
 	char attr_name[THERMAL_NAME_LENGTH];
 	struct device_attribute attr;
-	struct list_head node;
+	struct list_head tz_node; /* node in tz->thermal_instances */
+	struct list_head cdev_node; /* node in cdev->thermal_instances */
 };
 
 static DEFINE_IDR(thermal_tz_idr);
@@ -308,8 +318,9 @@
 			if (!strncmp("Processor", cdev->type,
 				     sizeof("Processor")))
 				thermal_zone_bind_cooling_device(tz,
-								 THERMAL_TRIPS_NONE,
-								 cdev);
+						THERMAL_TRIPS_NONE, cdev,
+						THERMAL_NO_LIMIT,
+						THERMAL_NO_LIMIT);
 		}
 		mutex_unlock(&thermal_list_lock);
 		if (!tz->passive_delay)
@@ -327,9 +338,6 @@
 		tz->passive_delay = 0;
 	}
 
-	tz->tc1 = 1;
-	tz->tc2 = 1;
-
 	tz->forced_passive = state;
 
 	thermal_zone_device_update(tz);
@@ -425,10 +433,10 @@
 thermal_cooling_device_trip_point_show(struct device *dev,
 				       struct device_attribute *attr, char *buf)
 {
-	struct thermal_cooling_device_instance *instance;
+	struct thermal_instance *instance;
 
 	instance =
-	    container_of(attr, struct thermal_cooling_device_instance, attr);
+	    container_of(attr, struct thermal_instance, attr);
 
 	if (instance->trip == THERMAL_TRIPS_NONE)
 		return sprintf(buf, "-1\n");
@@ -590,7 +598,7 @@
 	temp->tz = tz;
 	hwmon->count++;
 
-	snprintf(temp->temp_input.name, THERMAL_NAME_LENGTH,
+	snprintf(temp->temp_input.name, sizeof(temp->temp_input.name),
 		 "temp%d_input", hwmon->count);
 	temp->temp_input.attr.attr.name = temp->temp_input.name;
 	temp->temp_input.attr.attr.mode = 0444;
@@ -603,7 +611,8 @@
 	if (tz->ops->get_crit_temp) {
 		unsigned long temperature;
 		if (!tz->ops->get_crit_temp(tz, &temperature)) {
-			snprintf(temp->temp_crit.name, THERMAL_NAME_LENGTH,
+			snprintf(temp->temp_crit.name,
+				 sizeof(temp->temp_crit.name),
 				"temp%d_crit", hwmon->count);
 			temp->temp_crit.attr.attr.name = temp->temp_crit.name;
 			temp->temp_crit.attr.attr.mode = 0444;
@@ -704,74 +713,6 @@
 		cancel_delayed_work(&tz->poll_queue);
 }
 
-static void thermal_zone_device_passive(struct thermal_zone_device *tz,
-					int temp, int trip_temp, int trip)
-{
-	int trend = 0;
-	struct thermal_cooling_device_instance *instance;
-	struct thermal_cooling_device *cdev;
-	long state, max_state;
-
-	/*
-	 * Above Trip?
-	 * -----------
-	 * Calculate the thermal trend (using the passive cooling equation)
-	 * and modify the performance limit for all passive cooling devices
-	 * accordingly.  Note that we assume symmetry.
-	 */
-	if (temp >= trip_temp) {
-		tz->passive = true;
-
-		trend = (tz->tc1 * (temp - tz->last_temperature)) +
-			(tz->tc2 * (temp - trip_temp));
-
-		/* Heating up? */
-		if (trend > 0) {
-			list_for_each_entry(instance, &tz->cooling_devices,
-					    node) {
-				if (instance->trip != trip)
-					continue;
-				cdev = instance->cdev;
-				cdev->ops->get_cur_state(cdev, &state);
-				cdev->ops->get_max_state(cdev, &max_state);
-				if (state++ < max_state)
-					cdev->ops->set_cur_state(cdev, state);
-			}
-		} else if (trend < 0) { /* Cooling off? */
-			list_for_each_entry(instance, &tz->cooling_devices,
-					    node) {
-				if (instance->trip != trip)
-					continue;
-				cdev = instance->cdev;
-				cdev->ops->get_cur_state(cdev, &state);
-				cdev->ops->get_max_state(cdev, &max_state);
-				if (state > 0)
-					cdev->ops->set_cur_state(cdev, --state);
-			}
-		}
-		return;
-	}
-
-	/*
-	 * Below Trip?
-	 * -----------
-	 * Implement passive cooling hysteresis to slowly increase performance
-	 * and avoid thrashing around the passive trip point.  Note that we
-	 * assume symmetry.
-	 */
-	list_for_each_entry(instance, &tz->cooling_devices, node) {
-		if (instance->trip != trip)
-			continue;
-		cdev = instance->cdev;
-		cdev->ops->get_cur_state(cdev, &state);
-		cdev->ops->get_max_state(cdev, &max_state);
-		if (state > 0)
-			cdev->ops->set_cur_state(cdev, --state);
-		if (state == 0)
-			tz->passive = false;
-	}
-}
-
 static void thermal_zone_device_check(struct work_struct *work)
 {
 	struct thermal_zone_device *tz = container_of(work, struct
@@ -791,12 +732,14 @@
  */
 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
 				     int trip,
-				     struct thermal_cooling_device *cdev)
+				     struct thermal_cooling_device *cdev,
+				     unsigned long upper, unsigned long lower)
 {
-	struct thermal_cooling_device_instance *dev;
-	struct thermal_cooling_device_instance *pos;
+	struct thermal_instance *dev;
+	struct thermal_instance *pos;
 	struct thermal_zone_device *pos1;
 	struct thermal_cooling_device *pos2;
+	unsigned long max_state;
 	int result;
 
 	if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
@@ -814,13 +757,26 @@
 	if (tz != pos1 || cdev != pos2)
 		return -EINVAL;
 
+	cdev->ops->get_max_state(cdev, &max_state);
+
+	/* lower default 0, upper default max_state */
+	lower = lower == THERMAL_NO_LIMIT ? 0 : lower;
+	upper = upper == THERMAL_NO_LIMIT ? max_state : upper;
+
+	if (lower > upper || upper > max_state)
+		return -EINVAL;
+
 	dev =
-	    kzalloc(sizeof(struct thermal_cooling_device_instance), GFP_KERNEL);
+	    kzalloc(sizeof(struct thermal_instance), GFP_KERNEL);
 	if (!dev)
 		return -ENOMEM;
 	dev->tz = tz;
 	dev->cdev = cdev;
 	dev->trip = trip;
+	dev->upper = upper;
+	dev->lower = lower;
+	dev->target = THERMAL_NO_TARGET;
+
 	result = get_idr(&tz->idr, &tz->lock, &dev->id);
 	if (result)
 		goto free_mem;
@@ -841,13 +797,17 @@
 		goto remove_symbol_link;
 
 	mutex_lock(&tz->lock);
-	list_for_each_entry(pos, &tz->cooling_devices, node)
+	mutex_lock(&cdev->lock);
+	list_for_each_entry(pos, &tz->thermal_instances, tz_node)
 	    if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
 		result = -EEXIST;
 		break;
 	}
-	if (!result)
-		list_add_tail(&dev->node, &tz->cooling_devices);
+	if (!result) {
+		list_add_tail(&dev->tz_node, &tz->thermal_instances);
+		list_add_tail(&dev->cdev_node, &cdev->thermal_instances);
+	}
+	mutex_unlock(&cdev->lock);
 	mutex_unlock(&tz->lock);
 
 	if (!result)
@@ -877,16 +837,20 @@
 				       int trip,
 				       struct thermal_cooling_device *cdev)
 {
-	struct thermal_cooling_device_instance *pos, *next;
+	struct thermal_instance *pos, *next;
 
 	mutex_lock(&tz->lock);
-	list_for_each_entry_safe(pos, next, &tz->cooling_devices, node) {
+	mutex_lock(&cdev->lock);
+	list_for_each_entry_safe(pos, next, &tz->thermal_instances, tz_node) {
 		if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
-			list_del(&pos->node);
+			list_del(&pos->tz_node);
+			list_del(&pos->cdev_node);
+			mutex_unlock(&cdev->lock);
 			mutex_unlock(&tz->lock);
 			goto unbind;
 		}
 	}
+	mutex_unlock(&cdev->lock);
 	mutex_unlock(&tz->lock);
 
 	return -ENODEV;
@@ -934,7 +898,7 @@
 	struct thermal_zone_device *pos;
 	int result;
 
-	if (strlen(type) >= THERMAL_NAME_LENGTH)
+	if (type && strlen(type) >= THERMAL_NAME_LENGTH)
 		return ERR_PTR(-EINVAL);
 
 	if (!ops || !ops->get_max_state || !ops->get_cur_state ||
@@ -951,8 +915,11 @@
 		return ERR_PTR(result);
 	}
 
-	strcpy(cdev->type, type);
+	strcpy(cdev->type, type ? : "");
+	mutex_init(&cdev->lock);
+	INIT_LIST_HEAD(&cdev->thermal_instances);
 	cdev->ops = ops;
+	cdev->updated = true;
 	cdev->device.class = &thermal_class;
 	cdev->devdata = devdata;
 	dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
@@ -1044,6 +1011,136 @@
 }
 EXPORT_SYMBOL(thermal_cooling_device_unregister);
 
+static void thermal_cdev_do_update(struct thermal_cooling_device *cdev)
+{
+	struct thermal_instance *instance;
+	unsigned long target = 0;
+
+	/* cooling device is updated*/
+	if (cdev->updated)
+		return;
+
+	mutex_lock(&cdev->lock);
+	/* Make sure cdev enters the deepest cooling state */
+	list_for_each_entry(instance, &cdev->thermal_instances, cdev_node) {
+		if (instance->target == THERMAL_NO_TARGET)
+			continue;
+		if (instance->target > target)
+			target = instance->target;
+	}
+	mutex_unlock(&cdev->lock);
+	cdev->ops->set_cur_state(cdev, target);
+	cdev->updated = true;
+}
+
+static void thermal_zone_do_update(struct thermal_zone_device *tz)
+{
+	struct thermal_instance *instance;
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node)
+		thermal_cdev_do_update(instance->cdev);
+}
+
+/*
+ * Cooling algorithm for both active and passive cooling
+ *
+ * 1. if the temperature is higher than a trip point,
+ *    a. if the trend is THERMAL_TREND_RAISING, use higher cooling
+ *       state for this trip point
+ *    b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
+ *       state for this trip point
+ *
+ * 2. if the temperature is lower than a trip point, use lower
+ *    cooling state for this trip point
+ *
+ * Note that this behaves the same as the previous passive cooling
+ * algorithm.
+ */
+
+static void thermal_zone_trip_update(struct thermal_zone_device *tz,
+				     int trip, long temp)
+{
+	struct thermal_instance *instance;
+	struct thermal_cooling_device *cdev = NULL;
+	unsigned long cur_state, max_state;
+	long trip_temp;
+	enum thermal_trip_type trip_type;
+	enum thermal_trend trend;
+
+	if (trip == THERMAL_TRIPS_NONE) {
+		trip_temp = tz->forced_passive;
+		trip_type = THERMAL_TRIPS_NONE;
+	} else {
+		tz->ops->get_trip_temp(tz, trip, &trip_temp);
+		tz->ops->get_trip_type(tz, trip, &trip_type);
+	}
+
+	if (!tz->ops->get_trend || tz->ops->get_trend(tz, trip, &trend)) {
+		/*
+		 * compare the current temperature and previous temperature
+		 * to get the thermal trend, if no special requirement
+		 */
+		if (tz->temperature > tz->last_temperature)
+			trend = THERMAL_TREND_RAISING;
+		else if (tz->temperature < tz->last_temperature)
+			trend = THERMAL_TREND_DROPPING;
+		else
+			trend = THERMAL_TREND_STABLE;
+	}
+
+	if (temp >= trip_temp) {
+		list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+			if (instance->trip != trip)
+				continue;
+
+			cdev = instance->cdev;
+
+			cdev->ops->get_cur_state(cdev, &cur_state);
+			cdev->ops->get_max_state(cdev, &max_state);
+
+			if (trend == THERMAL_TREND_RAISING) {
+				cur_state = cur_state < instance->upper ?
+					    (cur_state + 1) : instance->upper;
+			} else if (trend == THERMAL_TREND_DROPPING) {
+				cur_state = cur_state > instance->lower ?
+				    (cur_state - 1) : instance->lower;
+			}
+
+			/* activate a passive thermal instance */
+			if ((trip_type == THERMAL_TRIP_PASSIVE ||
+			     trip_type == THERMAL_TRIPS_NONE) &&
+			     instance->target == THERMAL_NO_TARGET)
+				tz->passive++;
+
+			instance->target = cur_state;
+			cdev->updated = false; /* cooling device needs update */
+		}
+	} else {	/* below trip */
+		list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+			if (instance->trip != trip)
+				continue;
+
+			/* Do not use the inactive thermal instance */
+			if (instance->target == THERMAL_NO_TARGET)
+				continue;
+			cdev = instance->cdev;
+			cdev->ops->get_cur_state(cdev, &cur_state);
+
+			cur_state = cur_state > instance->lower ?
+				    (cur_state - 1) : THERMAL_NO_TARGET;
+
+			/* deactivate a passive thermal instance */
+			if ((trip_type == THERMAL_TRIP_PASSIVE ||
+			     trip_type == THERMAL_TRIPS_NONE) &&
+			     cur_state == THERMAL_NO_TARGET)
+				tz->passive--;
+			instance->target = cur_state;
+			cdev->updated = false; /* cooling device needs update */
+		}
+	}
+
+	return;
+}
 /**
  * thermal_zone_device_update - force an update of a thermal zone's state
  * @ttz:	the thermal zone to update
@@ -1054,8 +1151,6 @@
 	int count, ret = 0;
 	long temp, trip_temp;
 	enum thermal_trip_type trip_type;
-	struct thermal_cooling_device_instance *instance;
-	struct thermal_cooling_device *cdev;
 
 	mutex_lock(&tz->lock);
 
@@ -1065,6 +1160,9 @@
 		goto leave;
 	}
 
+	tz->last_temperature = tz->temperature;
+	tz->temperature = temp;
+
 	for (count = 0; count < tz->trips; count++) {
 		tz->ops->get_trip_type(tz, count, &trip_type);
 		tz->ops->get_trip_temp(tz, count, &trip_temp);
@@ -1088,32 +1186,18 @@
 					tz->ops->notify(tz, count, trip_type);
 			break;
 		case THERMAL_TRIP_ACTIVE:
-			list_for_each_entry(instance, &tz->cooling_devices,
-					    node) {
-				if (instance->trip != count)
-					continue;
-
-				cdev = instance->cdev;
-
-				if (temp >= trip_temp)
-					cdev->ops->set_cur_state(cdev, 1);
-				else
-					cdev->ops->set_cur_state(cdev, 0);
-			}
+			thermal_zone_trip_update(tz, count, temp);
 			break;
 		case THERMAL_TRIP_PASSIVE:
 			if (temp >= trip_temp || tz->passive)
-				thermal_zone_device_passive(tz, temp,
-							    trip_temp, count);
+				thermal_zone_trip_update(tz, count, temp);
 			break;
 		}
 	}
 
 	if (tz->forced_passive)
-		thermal_zone_device_passive(tz, temp, tz->forced_passive,
-					    THERMAL_TRIPS_NONE);
-
-	tz->last_temperature = temp;
+		thermal_zone_trip_update(tz, THERMAL_TRIPS_NONE, temp);
+	thermal_zone_do_update(tz);
 
 leave:
 	if (tz->passive)
@@ -1236,8 +1320,6 @@
  * @mask:	a bit string indicating the writeablility of trip points
  * @devdata:	private device data
  * @ops:	standard thermal zone device callbacks
- * @tc1:	thermal coefficient 1 for passive calculations
- * @tc2:	thermal coefficient 2 for passive calculations
  * @passive_delay: number of milliseconds to wait between polls when
  *		   performing passive cooling
  * @polling_delay: number of milliseconds to wait between polls when checking
@@ -1245,13 +1327,12 @@
  *		   driven systems)
  *
  * thermal_zone_device_unregister() must be called when the device is no
- * longer needed. The passive cooling formula uses tc1 and tc2 as described in
- * section 11.1.5.1 of the ACPI specification 3.0.
+ * longer needed. The passive cooling depends on the .get_trend() return value.
  */
 struct thermal_zone_device *thermal_zone_device_register(const char *type,
 	int trips, int mask, void *devdata,
 	const struct thermal_zone_device_ops *ops,
-	int tc1, int tc2, int passive_delay, int polling_delay)
+	int passive_delay, int polling_delay)
 {
 	struct thermal_zone_device *tz;
 	struct thermal_cooling_device *pos;
@@ -1260,7 +1341,7 @@
 	int count;
 	int passive = 0;
 
-	if (strlen(type) >= THERMAL_NAME_LENGTH)
+	if (type && strlen(type) >= THERMAL_NAME_LENGTH)
 		return ERR_PTR(-EINVAL);
 
 	if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips)
@@ -1273,7 +1354,7 @@
 	if (!tz)
 		return ERR_PTR(-ENOMEM);
 
-	INIT_LIST_HEAD(&tz->cooling_devices);
+	INIT_LIST_HEAD(&tz->thermal_instances);
 	idr_init(&tz->idr);
 	mutex_init(&tz->lock);
 	result = get_idr(&thermal_tz_idr, &thermal_idr_lock, &tz->id);
@@ -1282,13 +1363,11 @@
 		return ERR_PTR(result);
 	}
 
-	strcpy(tz->type, type);
+	strcpy(tz->type, type ? : "");
 	tz->ops = ops;
 	tz->device.class = &thermal_class;
 	tz->devdata = devdata;
 	tz->trips = trips;
-	tz->tc1 = tc1;
-	tz->tc2 = tc2;
 	tz->passive_delay = passive_delay;
 	tz->polling_delay = polling_delay;
 
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index 2944ff8..f4abfe2 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -478,7 +478,6 @@
 	case XenbusStateInitialising:
 	case XenbusStateInitialised:
 	case XenbusStateUnknown:
-	case XenbusStateClosed:
 		break;
 
 	case XenbusStateInitWait:
@@ -488,6 +487,10 @@
 		xenbus_switch_state(dev, XenbusStateConnected);
 		break;
 
+	case XenbusStateClosed:
+		if (dev->state == XenbusStateClosed)
+			break;
+		/* Missed the backend's CLOSING state -- fallthrough */
 	case XenbusStateClosing:
 		xenbus_frontend_closed(dev);
 		break;
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index c0b33432..1002054 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -97,7 +97,8 @@
 
 static int kgdboc_register_kbd(char **cptr)
 {
-	if (strncmp(*cptr, "kbd", 3) == 0) {
+	if (strncmp(*cptr, "kbd", 3) == 0 ||
+		strncmp(*cptr, "kdb", 3) == 0) {
 		if (kdb_poll_idx < KDB_POLL_FUNC_MAX) {
 			kdb_poll_funcs[kdb_poll_idx] = kdb_get_kbd_char;
 			kdb_poll_idx++;
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 999ca63..f87d7e8 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3442,6 +3442,19 @@
 			kdb_set(2, setargs);
 		}
 	}
+	if (vc->vc_cols < 999) {
+		int colcount;
+		char cols[4];
+		const char *setargs[3] = {
+			"set",
+			"COLUMNS",
+			cols,
+		};
+		if (kdbgetintenv(setargs[0], &colcount)) {
+			snprintf(cols, 4, "%i", vc->vc_cols);
+			kdb_set(2, setargs);
+		}
+	}
 #endif /* CONFIG_KGDB_KDB */
 	return ret;
 }
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 36f2be4..981f213 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1551,6 +1551,9 @@
 					   Maybe we should define a new
 					   quirk for this. */
 	},
+	{ USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */
+	.driver_info = NO_UNION_NORMAL,
+	},
 	{ USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
 	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
 	},
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index 131dec0..48220e1 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -48,6 +48,7 @@
 #include <xen/xenbus.h>
 #include <xen/xen.h>
 #include "xenbus_comms.h"
+#include <asm/xen/hypervisor.h>
 
 struct xs_stored_msg {
 	struct list_head list;
@@ -618,7 +619,24 @@
 
 	return NULL;
 }
+/*
+ * Certain older XenBus toolstack cannot handle reading values that are
+ * not populated. Some Xen 3.4 installation are incapable of doing this
+ * so if we are running on anything older than 4 do not attempt to read
+ * control/platform-feature-xs_reset_watches.
+ */
+static bool xen_strict_xenbus_quirk()
+{
+	uint32_t eax, ebx, ecx, edx, base;
 
+	base = xen_cpuid_base();
+	cpuid(base + 1, &eax, &ebx, &ecx, &edx);
+
+	if ((eax >> 16) < 4)
+		return true;
+	return false;
+
+}
 static void xs_reset_watches(void)
 {
 	int err, supported = 0;
@@ -626,6 +644,9 @@
 	if (!xen_hvm_domain() || xen_initial_domain())
 		return;
 
+	if (xen_strict_xenbus_quirk())
+		return;
+
 	err = xenbus_scanf(XBT_NIL, "control",
 			"platform-feature-xs_reset_watches", "%d", &supported);
 	if (err != 1 || !supported)
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index e568c47..6116880 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -638,7 +638,7 @@
 		return -ENOENT;
 
 	BUG_ON(victim->d_parent->d_inode != dir);
-	audit_inode_child(victim, dir);
+	audit_inode_child(dir, victim, AUDIT_TYPE_CHILD_DELETE);
 
 	error = inode_permission(dir, MAY_WRITE | MAY_EXEC);
 	if (error)
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index e9ebb47..81e407d 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2952,8 +2952,8 @@
 			    struct btrfs_inode_item *item,
 			    struct inode *inode, int log_inode_only)
 {
-	btrfs_set_inode_uid(leaf, item, inode->i_uid);
-	btrfs_set_inode_gid(leaf, item, inode->i_gid);
+	btrfs_set_inode_uid(leaf, item, i_uid_read(inode));
+	btrfs_set_inode_gid(leaf, item, i_gid_read(inode));
 	btrfs_set_inode_mode(leaf, item, inode->i_mode);
 	btrfs_set_inode_nlink(leaf, item, inode->i_nlink);
 
diff --git a/fs/compat.c b/fs/compat.c
index b7a24d0..015e1e1 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -776,16 +776,16 @@
 	char *kernel_type;
 	unsigned long data_page;
 	char *kernel_dev;
-	char *dir_page;
+	struct filename *dir;
 	int retval;
 
 	retval = copy_mount_string(type, &kernel_type);
 	if (retval < 0)
 		goto out;
 
-	dir_page = getname(dir_name);
-	retval = PTR_ERR(dir_page);
-	if (IS_ERR(dir_page))
+	dir = getname(dir_name);
+	retval = PTR_ERR(dir);
+	if (IS_ERR(dir))
 		goto out1;
 
 	retval = copy_mount_string(dev_name, &kernel_dev);
@@ -807,7 +807,7 @@
 		}
 	}
 
-	retval = do_mount(kernel_dev, dir_page, kernel_type,
+	retval = do_mount(kernel_dev, dir->name, kernel_type,
 			flags, (void*)data_page);
 
  out4:
@@ -815,7 +815,7 @@
  out3:
 	kfree(kernel_dev);
  out2:
-	putname(dir_page);
+	putname(dir);
  out1:
 	kfree(kernel_type);
  out:
diff --git a/fs/exec.c b/fs/exec.c
index ca43453..8b9011b 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -105,7 +105,7 @@
 SYSCALL_DEFINE1(uselib, const char __user *, library)
 {
 	struct file *file;
-	char *tmp = getname(library);
+	struct filename *tmp = getname(library);
 	int error = PTR_ERR(tmp);
 	static const struct open_flags uselib_flags = {
 		.open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC,
@@ -751,13 +751,14 @@
 {
 	struct file *file;
 	int err;
+	struct filename tmp = { .name = name };
 	static const struct open_flags open_exec_flags = {
 		.open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC,
 		.acc_mode = MAY_EXEC | MAY_OPEN,
 		.intent = LOOKUP_OPEN
 	};
 
-	file = do_filp_open(AT_FDCWD, name, &open_exec_flags, LOOKUP_FOLLOW);
+	file = do_filp_open(AT_FDCWD, &tmp, &open_exec_flags, LOOKUP_FOLLOW);
 	if (IS_ERR(file))
 		goto out;
 
@@ -1664,10 +1665,10 @@
 		const char __user *const __user *, argv,
 		const char __user *const __user *, envp)
 {
-	const char *path = getname(filename);
+	struct filename *path = getname(filename);
 	int error = PTR_ERR(path);
 	if (!IS_ERR(path)) {
-		error = do_execve(path, argv, envp, current_pt_regs());
+		error = do_execve(path->name, argv, envp, current_pt_regs());
 		putname(path);
 	}
 	return error;
@@ -1677,10 +1678,11 @@
 	const compat_uptr_t __user * argv,
 	const compat_uptr_t __user * envp)
 {
-	const char *path = getname(filename);
+	struct filename *path = getname(filename);
 	int error = PTR_ERR(path);
 	if (!IS_ERR(path)) {
-		error = compat_do_execve(path, argv, envp, current_pt_regs());
+		error = compat_do_execve(path->name, argv, envp,
+							current_pt_regs());
 		putname(path);
 	}
 	return error;
diff --git a/fs/filesystems.c b/fs/filesystems.c
index 96f2428..da165f6 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -124,7 +124,7 @@
 static int fs_index(const char __user * __name)
 {
 	struct file_system_type * tmp;
-	char * name;
+	struct filename *name;
 	int err, index;
 
 	name = getname(__name);
@@ -135,7 +135,7 @@
 	err = -EINVAL;
 	read_lock(&file_systems_lock);
 	for (tmp=file_systems, index=0 ; tmp ; tmp=tmp->next, index++) {
-		if (strcmp(tmp->name,name) == 0) {
+		if (strcmp(tmp->name, name->name) == 0) {
 			err = index;
 			break;
 		}
diff --git a/fs/internal.h b/fs/internal.h
index 371bcc4..916b7cb 100644
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -97,8 +97,8 @@
 	int acc_mode;
 	int intent;
 };
-extern struct file *do_filp_open(int dfd, const char *pathname,
-		const struct open_flags *op, int lookup_flags);
+extern struct file *do_filp_open(int dfd, struct filename *pathname,
+		const struct open_flags *op, int flags);
 extern struct file *do_file_open_root(struct dentry *, struct vfsmount *,
 		const char *, const struct open_flags *, int lookup_flags);
 
diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index 7e35587..a2aa97d 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -126,7 +126,7 @@
 static int
 lockd(void *vrqstp)
 {
-	int		err = 0, preverr = 0;
+	int		err = 0;
 	struct svc_rqst *rqstp = vrqstp;
 
 	/* try_to_freeze() is called from svc_recv() */
@@ -165,21 +165,8 @@
 		 * recvfrom routine.
 		 */
 		err = svc_recv(rqstp, timeout);
-		if (err == -EAGAIN || err == -EINTR) {
-			preverr = err;
+		if (err == -EAGAIN || err == -EINTR)
 			continue;
-		}
-		if (err < 0) {
-			if (err != preverr) {
-				printk(KERN_WARNING "%s: unexpected error "
-					"from svc_recv (%d)\n", __func__, err);
-				preverr = err;
-			}
-			schedule_timeout_interruptible(HZ);
-			continue;
-		}
-		preverr = err;
-
 		dprintk("lockd: request from %s\n",
 				svc_print_addr(rqstp, buf, sizeof(buf)));
 
diff --git a/fs/locks.c b/fs/locks.c
index abc7dc6..a94e331 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1289,7 +1289,7 @@
 void lease_get_mtime(struct inode *inode, struct timespec *time)
 {
 	struct file_lock *flock = inode->i_flock;
-	if (flock && IS_LEASE(flock) && (flock->fl_type & F_WRLCK))
+	if (flock && IS_LEASE(flock) && (flock->fl_type == F_WRLCK))
 		*time = current_fs_time(inode->i_sb);
 	else
 		*time = inode->i_mtime;
@@ -2185,8 +2185,8 @@
 	} else {
 		seq_printf(f, "%s ",
 			       (lease_breaking(fl))
-			       ? (fl->fl_type & F_UNLCK) ? "UNLCK" : "READ "
-			       : (fl->fl_type & F_WRLCK) ? "WRITE" : "READ ");
+			       ? (fl->fl_type == F_UNLCK) ? "UNLCK" : "READ "
+			       : (fl->fl_type == F_WRLCK) ? "WRITE" : "READ ");
 	}
 	if (inode) {
 #ifdef WE_CAN_BREAK_LSLK_NOW
diff --git a/fs/namei.c b/fs/namei.c
index c1f18e4..d1895f3 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -117,18 +117,70 @@
  * POSIX.1 2.4: an empty pathname is invalid (ENOENT).
  * PATH_MAX includes the nul terminator --RR.
  */
-static char *getname_flags(const char __user *filename, int flags, int *empty)
+void final_putname(struct filename *name)
 {
-	char *result = __getname(), *err;
-	int len;
+	if (name->separate) {
+		__putname(name->name);
+		kfree(name);
+	} else {
+		__putname(name);
+	}
+}
 
+#define EMBEDDED_NAME_MAX	(PATH_MAX - sizeof(struct filename))
+
+static struct filename *
+getname_flags(const char __user *filename, int flags, int *empty)
+{
+	struct filename *result, *err;
+	int len;
+	long max;
+	char *kname;
+
+	result = audit_reusename(filename);
+	if (result)
+		return result;
+
+	result = __getname();
 	if (unlikely(!result))
 		return ERR_PTR(-ENOMEM);
 
-	len = strncpy_from_user(result, filename, PATH_MAX);
-	err = ERR_PTR(len);
-	if (unlikely(len < 0))
+	/*
+	 * First, try to embed the struct filename inside the names_cache
+	 * allocation
+	 */
+	kname = (char *)result + sizeof(*result);
+	result->name = kname;
+	result->separate = false;
+	max = EMBEDDED_NAME_MAX;
+
+recopy:
+	len = strncpy_from_user(kname, filename, max);
+	if (unlikely(len < 0)) {
+		err = ERR_PTR(len);
 		goto error;
+	}
+
+	/*
+	 * Uh-oh. We have a name that's approaching PATH_MAX. Allocate a
+	 * separate struct filename so we can dedicate the entire
+	 * names_cache allocation for the pathname, and re-do the copy from
+	 * userland.
+	 */
+	if (len == EMBEDDED_NAME_MAX && max == EMBEDDED_NAME_MAX) {
+		kname = (char *)result;
+
+		result = kzalloc(sizeof(*result), GFP_KERNEL);
+		if (!result) {
+			err = ERR_PTR(-ENOMEM);
+			result = (struct filename *)kname;
+			goto error;
+		}
+		result->name = kname;
+		result->separate = true;
+		max = PATH_MAX;
+		goto recopy;
+	}
 
 	/* The empty path is special. */
 	if (unlikely(!len)) {
@@ -140,30 +192,32 @@
 	}
 
 	err = ERR_PTR(-ENAMETOOLONG);
-	if (likely(len < PATH_MAX)) {
-		audit_getname(result);
-		return result;
-	}
+	if (unlikely(len >= PATH_MAX))
+		goto error;
+
+	result->uptr = filename;
+	audit_getname(result);
+	return result;
 
 error:
-	__putname(result);
+	final_putname(result);
 	return err;
 }
 
-char *getname(const char __user * filename)
+struct filename *
+getname(const char __user * filename)
 {
 	return getname_flags(filename, 0, NULL);
 }
+EXPORT_SYMBOL(getname);
 
 #ifdef CONFIG_AUDITSYSCALL
-void putname(const char *name)
+void putname(struct filename *name)
 {
 	if (unlikely(!audit_dummy_context()))
-		audit_putname(name);
-	else
-		__putname(name);
+		return audit_putname(name);
+	final_putname(name);
 }
-EXPORT_SYMBOL(putname);
 #endif
 
 static int check_acl(struct inode *inode, int mask)
@@ -1963,22 +2017,27 @@
 	return err;
 }
 
+static int filename_lookup(int dfd, struct filename *name,
+				unsigned int flags, struct nameidata *nd)
+{
+	int retval = path_lookupat(dfd, name->name, flags | LOOKUP_RCU, nd);
+	if (unlikely(retval == -ECHILD))
+		retval = path_lookupat(dfd, name->name, flags, nd);
+	if (unlikely(retval == -ESTALE))
+		retval = path_lookupat(dfd, name->name,
+						flags | LOOKUP_REVAL, nd);
+
+	if (likely(!retval))
+		audit_inode(name, nd->path.dentry, flags & LOOKUP_PARENT);
+	return retval;
+}
+
 static int do_path_lookup(int dfd, const char *name,
 				unsigned int flags, struct nameidata *nd)
 {
-	int retval = path_lookupat(dfd, name, flags | LOOKUP_RCU, nd);
-	if (unlikely(retval == -ECHILD))
-		retval = path_lookupat(dfd, name, flags, nd);
-	if (unlikely(retval == -ESTALE))
-		retval = path_lookupat(dfd, name, flags | LOOKUP_REVAL, nd);
+	struct filename filename = { .name = name };
 
-	if (likely(!retval)) {
-		if (unlikely(!audit_dummy_context())) {
-			if (nd->path.dentry && nd->inode)
-				audit_inode(name, nd->path.dentry);
-		}
-	}
-	return retval;
+	return filename_lookup(dfd, &filename, flags, nd);
 }
 
 /* does lookup, returns the object with parent locked */
@@ -2098,13 +2157,13 @@
 		 struct path *path, int *empty)
 {
 	struct nameidata nd;
-	char *tmp = getname_flags(name, flags, empty);
+	struct filename *tmp = getname_flags(name, flags, empty);
 	int err = PTR_ERR(tmp);
 	if (!IS_ERR(tmp)) {
 
 		BUG_ON(flags & LOOKUP_PARENT);
 
-		err = do_path_lookup(dfd, tmp, flags, &nd);
+		err = filename_lookup(dfd, tmp, flags, &nd);
 		putname(tmp);
 		if (!err)
 			*path = nd.path;
@@ -2118,22 +2177,28 @@
 	return user_path_at_empty(dfd, name, flags, path, NULL);
 }
 
-static int user_path_parent(int dfd, const char __user *path,
-			struct nameidata *nd, char **name)
+/*
+ * NB: most callers don't do anything directly with the reference to the
+ *     to struct filename, but the nd->last pointer points into the name string
+ *     allocated by getname. So we must hold the reference to it until all
+ *     path-walking is complete.
+ */
+static struct filename *
+user_path_parent(int dfd, const char __user *path, struct nameidata *nd)
 {
-	char *s = getname(path);
+	struct filename *s = getname(path);
 	int error;
 
 	if (IS_ERR(s))
-		return PTR_ERR(s);
+		return s;
 
-	error = do_path_lookup(dfd, s, LOOKUP_PARENT, nd);
-	if (error)
+	error = filename_lookup(dfd, s, LOOKUP_PARENT, nd);
+	if (error) {
 		putname(s);
-	else
-		*name = s;
+		return ERR_PTR(error);
+	}
 
-	return error;
+	return s;
 }
 
 /*
@@ -2180,7 +2245,7 @@
 		return -ENOENT;
 
 	BUG_ON(victim->d_parent->d_inode != dir);
-	audit_inode_child(victim, dir);
+	audit_inode_child(dir, victim, AUDIT_TYPE_CHILD_DELETE);
 
 	error = inode_permission(dir, MAY_WRITE | MAY_EXEC);
 	if (error)
@@ -2625,7 +2690,7 @@
  */
 static int do_last(struct nameidata *nd, struct path *path,
 		   struct file *file, const struct open_flags *op,
-		   int *opened, const char *pathname)
+		   int *opened, struct filename *name)
 {
 	struct dentry *dir = nd->path.dentry;
 	int open_flag = op->open_flag;
@@ -2652,7 +2717,7 @@
 		error = complete_walk(nd);
 		if (error)
 			return error;
-		audit_inode(pathname, nd->path.dentry);
+		audit_inode(name, nd->path.dentry, 0);
 		if (open_flag & O_CREAT) {
 			error = -EISDIR;
 			goto out;
@@ -2662,7 +2727,7 @@
 		error = complete_walk(nd);
 		if (error)
 			return error;
-		audit_inode(pathname, dir);
+		audit_inode(name, dir, 0);
 		goto finish_open;
 	}
 
@@ -2691,7 +2756,7 @@
 		if (error)
 			return error;
 
-		audit_inode(pathname, dir);
+		audit_inode(name, dir, 0);
 		error = -EISDIR;
 		/* trailing slashes? */
 		if (nd->last.name[nd->last.len])
@@ -2721,7 +2786,7 @@
 		    !S_ISREG(file->f_path.dentry->d_inode->i_mode))
 			will_truncate = false;
 
-		audit_inode(pathname, file->f_path.dentry);
+		audit_inode(name, file->f_path.dentry, 0);
 		goto opened;
 	}
 
@@ -2738,7 +2803,7 @@
 	 * create/update audit record if it already exists.
 	 */
 	if (path->dentry->d_inode)
-		audit_inode(pathname, path->dentry);
+		audit_inode(name, path->dentry, 0);
 
 	/*
 	 * If atomic_open() acquired write access it is dropped now due to
@@ -2803,7 +2868,7 @@
 	error = -ENOTDIR;
 	if ((nd->flags & LOOKUP_DIRECTORY) && !nd->inode->i_op->lookup)
 		goto out;
-	audit_inode(pathname, nd->path.dentry);
+	audit_inode(name, nd->path.dentry, 0);
 finish_open:
 	if (!S_ISREG(nd->inode->i_mode))
 		will_truncate = false;
@@ -2871,7 +2936,7 @@
 	goto retry_lookup;
 }
 
-static struct file *path_openat(int dfd, const char *pathname,
+static struct file *path_openat(int dfd, struct filename *pathname,
 		struct nameidata *nd, const struct open_flags *op, int flags)
 {
 	struct file *base = NULL;
@@ -2886,12 +2951,12 @@
 
 	file->f_flags = op->open_flag;
 
-	error = path_init(dfd, pathname, flags | LOOKUP_PARENT, nd, &base);
+	error = path_init(dfd, pathname->name, flags | LOOKUP_PARENT, nd, &base);
 	if (unlikely(error))
 		goto out;
 
 	current->total_link_count = 0;
-	error = link_path_walk(pathname, nd);
+	error = link_path_walk(pathname->name, nd);
 	if (unlikely(error))
 		goto out;
 
@@ -2937,7 +3002,7 @@
 	return file;
 }
 
-struct file *do_filp_open(int dfd, const char *pathname,
+struct file *do_filp_open(int dfd, struct filename *pathname,
 		const struct open_flags *op, int flags)
 {
 	struct nameidata nd;
@@ -2956,6 +3021,7 @@
 {
 	struct nameidata nd;
 	struct file *file;
+	struct filename filename = { .name = name };
 
 	nd.root.mnt = mnt;
 	nd.root.dentry = dentry;
@@ -2965,11 +3031,11 @@
 	if (dentry->d_inode->i_op->follow_link && op->intent & LOOKUP_OPEN)
 		return ERR_PTR(-ELOOP);
 
-	file = path_openat(-1, name, &nd, op, flags | LOOKUP_RCU);
+	file = path_openat(-1, &filename, &nd, op, flags | LOOKUP_RCU);
 	if (unlikely(file == ERR_PTR(-ECHILD)))
-		file = path_openat(-1, name, &nd, op, flags);
+		file = path_openat(-1, &filename, &nd, op, flags);
 	if (unlikely(file == ERR_PTR(-ESTALE)))
-		file = path_openat(-1, name, &nd, op, flags | LOOKUP_REVAL);
+		file = path_openat(-1, &filename, &nd, op, flags | LOOKUP_REVAL);
 	return file;
 }
 
@@ -3044,11 +3110,11 @@
 
 struct dentry *user_path_create(int dfd, const char __user *pathname, struct path *path, int is_dir)
 {
-	char *tmp = getname(pathname);
+	struct filename *tmp = getname(pathname);
 	struct dentry *res;
 	if (IS_ERR(tmp))
 		return ERR_CAST(tmp);
-	res = kern_path_create(dfd, tmp, path, is_dir);
+	res = kern_path_create(dfd, tmp->name, path, is_dir);
 	putname(tmp);
 	return res;
 }
@@ -3253,13 +3319,13 @@
 static long do_rmdir(int dfd, const char __user *pathname)
 {
 	int error = 0;
-	char * name;
+	struct filename *name;
 	struct dentry *dentry;
 	struct nameidata nd;
 
-	error = user_path_parent(dfd, pathname, &nd, &name);
-	if (error)
-		return error;
+	name = user_path_parent(dfd, pathname, &nd);
+	if (IS_ERR(name))
+		return PTR_ERR(name);
 
 	switch(nd.last_type) {
 	case LAST_DOTDOT:
@@ -3348,14 +3414,14 @@
 static long do_unlinkat(int dfd, const char __user *pathname)
 {
 	int error;
-	char *name;
+	struct filename *name;
 	struct dentry *dentry;
 	struct nameidata nd;
 	struct inode *inode = NULL;
 
-	error = user_path_parent(dfd, pathname, &nd, &name);
-	if (error)
-		return error;
+	name = user_path_parent(dfd, pathname, &nd);
+	if (IS_ERR(name))
+		return PTR_ERR(name);
 
 	error = -EISDIR;
 	if (nd.last_type != LAST_NORM)
@@ -3439,7 +3505,7 @@
 		int, newdfd, const char __user *, newname)
 {
 	int error;
-	char *from;
+	struct filename *from;
 	struct dentry *dentry;
 	struct path path;
 
@@ -3452,9 +3518,9 @@
 	if (IS_ERR(dentry))
 		goto out_putname;
 
-	error = security_path_symlink(&path, dentry, from);
+	error = security_path_symlink(&path, dentry, from->name);
 	if (!error)
-		error = vfs_symlink(path.dentry->d_inode, dentry, from);
+		error = vfs_symlink(path.dentry->d_inode, dentry, from->name);
 	done_path_create(&path, dentry);
 out_putname:
 	putname(from);
@@ -3734,17 +3800,21 @@
 	struct dentry *old_dentry, *new_dentry;
 	struct dentry *trap;
 	struct nameidata oldnd, newnd;
-	char *from;
-	char *to;
+	struct filename *from;
+	struct filename *to;
 	int error;
 
-	error = user_path_parent(olddfd, oldname, &oldnd, &from);
-	if (error)
+	from = user_path_parent(olddfd, oldname, &oldnd);
+	if (IS_ERR(from)) {
+		error = PTR_ERR(from);
 		goto exit;
+	}
 
-	error = user_path_parent(newdfd, newname, &newnd, &to);
-	if (error)
+	to = user_path_parent(newdfd, newname, &newnd);
+	if (IS_ERR(to)) {
+		error = PTR_ERR(to);
 		goto exit1;
+	}
 
 	error = -EXDEV;
 	if (oldnd.path.mnt != newnd.path.mnt)
@@ -3968,7 +4038,6 @@
 EXPORT_SYMBOL(follow_down);
 EXPORT_SYMBOL(follow_up);
 EXPORT_SYMBOL(get_write_access); /* nfsd */
-EXPORT_SYMBOL(getname);
 EXPORT_SYMBOL(lock_rename);
 EXPORT_SYMBOL(lookup_one_len);
 EXPORT_SYMBOL(page_follow_link_light);
diff --git a/fs/namespace.c b/fs/namespace.c
index fc33207..2496062 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -2408,7 +2408,7 @@
 {
 	int ret;
 	char *kernel_type;
-	char *kernel_dir;
+	struct filename *kernel_dir;
 	char *kernel_dev;
 	unsigned long data_page;
 
@@ -2430,7 +2430,7 @@
 	if (ret < 0)
 		goto out_data;
 
-	ret = do_mount(kernel_dev, kernel_dir, kernel_type, flags,
+	ret = do_mount(kernel_dev, kernel_dir->name, kernel_type, flags,
 		(void *) data_page);
 
 	free_page(data_page);
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index 2245bef..9a521fb 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -72,7 +72,7 @@
 static int
 nfs4_callback_svc(void *vrqstp)
 {
-	int err, preverr = 0;
+	int err;
 	struct svc_rqst *rqstp = vrqstp;
 
 	set_freezable();
@@ -82,20 +82,8 @@
 		 * Listen for a request on the socket
 		 */
 		err = svc_recv(rqstp, MAX_SCHEDULE_TIMEOUT);
-		if (err == -EAGAIN || err == -EINTR) {
-			preverr = err;
+		if (err == -EAGAIN || err == -EINTR)
 			continue;
-		}
-		if (err < 0) {
-			if (err != preverr) {
-				printk(KERN_WARNING "NFS: %s: unexpected error "
-					"from svc_recv (%d)\n", __func__, err);
-				preverr = err;
-			}
-			schedule_timeout_uninterruptible(HZ);
-			continue;
-		}
-		preverr = err;
 		svc_process(rqstp);
 	}
 	return 0;
diff --git a/fs/nfsd/nfs2acl.c b/fs/nfsd/nfs2acl.c
index 6aa5590..b314888 100644
--- a/fs/nfsd/nfs2acl.c
+++ b/fs/nfsd/nfs2acl.c
@@ -218,8 +218,7 @@
  * There must be an encoding function for void results so svc_process
  * will work properly.
  */
-int
-nfsaclsvc_encode_voidres(struct svc_rqst *rqstp, __be32 *p, void *dummy)
+static int nfsaclsvc_encode_voidres(struct svc_rqst *rqstp, __be32 *p, void *dummy)
 {
 	return xdr_ressize_check(rqstp, p);
 }
diff --git a/fs/nfsd/nfs3proc.c b/fs/nfsd/nfs3proc.c
index 9095f3c..97d90d1 100644
--- a/fs/nfsd/nfs3proc.c
+++ b/fs/nfsd/nfs3proc.c
@@ -247,7 +247,7 @@
 	/* Now create the file and set attributes */
 	nfserr = do_nfsd_create(rqstp, dirfhp, argp->name, argp->len,
 				attr, newfhp,
-				argp->createmode, argp->verf, NULL, NULL);
+				argp->createmode, (u32 *)argp->verf, NULL, NULL);
 
 	RETURN_STATUS(nfserr);
 }
diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c
index 4c7bd35..bdf29c9 100644
--- a/fs/nfsd/nfs4callback.c
+++ b/fs/nfsd/nfs4callback.c
@@ -1028,7 +1028,6 @@
 	cb->cb_msg.rpc_cred = callback_cred;
 
 	cb->cb_ops = &nfsd4_cb_recall_ops;
-	dp->dl_retries = 1;
 
 	INIT_LIST_HEAD(&cb->cb_per_client);
 	cb->cb_done = true;
diff --git a/fs/nfsd/nfs4idmap.c b/fs/nfsd/nfs4idmap.c
index fdc91a6..a1f10c0 100644
--- a/fs/nfsd/nfs4idmap.c
+++ b/fs/nfsd/nfs4idmap.c
@@ -478,7 +478,7 @@
 		goto destroy_idtoname_cache;
 	nn->nametoid_cache = cache_create_net(&nametoid_cache_template, net);
 	if (IS_ERR(nn->nametoid_cache)) {
-		rv = PTR_ERR(nn->idtoname_cache);
+		rv = PTR_ERR(nn->nametoid_cache);
 		goto unregister_idtoname_cache;
 	}
 	rv = cache_register_net(nn->nametoid_cache, net);
@@ -598,7 +598,7 @@
 	/* Just to make sure it's null-terminated: */
 	memcpy(buf, name, namelen);
 	buf[namelen] = '\0';
-	ret = kstrtouint(name, 10, id);
+	ret = kstrtouint(buf, 10, id);
 	return ret == 0;
 }
 
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index c9c1c0a..6c9a4b2 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -370,7 +370,7 @@
 			break;
 		case NFS4_OPEN_CLAIM_PREVIOUS:
 			open->op_openowner->oo_flags |= NFS4_OO_CONFIRMED;
-			status = nfs4_check_open_reclaim(&open->op_clientid);
+			status = nfs4_check_open_reclaim(&open->op_clientid, cstate->minorversion);
 			if (status)
 				goto out;
 		case NFS4_OPEN_CLAIM_FH:
@@ -1054,8 +1054,8 @@
 	char *op_name;
 	/* Try to get response size before operation */
 	nfsd4op_rsize op_rsize_bop;
-	stateid_setter op_get_currentstateid;
-	stateid_getter op_set_currentstateid;
+	stateid_getter op_get_currentstateid;
+	stateid_setter op_set_currentstateid;
 };
 
 static struct nfsd4_operation nfsd4_ops[];
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 48a1bad..d0237f8 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -758,7 +758,7 @@
 	spin_unlock(&nfsd_drc_lock);
 }
 
-static struct nfsd4_session *alloc_session(int slotsize, int numslots)
+static struct nfsd4_session *__alloc_session(int slotsize, int numslots)
 {
 	struct nfsd4_session *new;
 	int mem, i;
@@ -852,35 +852,28 @@
 	return register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user);
 }
 
-static __be32 nfsd4_new_conn(struct svc_rqst *rqstp, struct nfsd4_session *ses, u32 dir)
+static void nfsd4_init_conn(struct svc_rqst *rqstp, struct nfsd4_conn *conn, struct nfsd4_session *ses)
 {
-	struct nfsd4_conn *conn;
 	int ret;
 
-	conn = alloc_conn(rqstp, dir);
-	if (!conn)
-		return nfserr_jukebox;
 	nfsd4_hash_conn(conn, ses);
 	ret = nfsd4_register_conn(conn);
 	if (ret)
 		/* oops; xprt is already down: */
 		nfsd4_conn_lost(&conn->cn_xpt_user);
-	if (ses->se_client->cl_cb_state == NFSD4_CB_DOWN &&
-		dir & NFS4_CDFC4_BACK) {
+	if (conn->cn_flags & NFS4_CDFC4_BACK) {
 		/* callback channel may be back up */
 		nfsd4_probe_callback(ses->se_client);
 	}
-	return nfs_ok;
 }
 
-static __be32 nfsd4_new_conn_from_crses(struct svc_rqst *rqstp, struct nfsd4_session *ses)
+static struct nfsd4_conn *alloc_conn_from_crses(struct svc_rqst *rqstp, struct nfsd4_create_session *cses)
 {
 	u32 dir = NFS4_CDFC4_FORE;
 
-	if (ses->se_flags & SESSION4_BACK_CHAN)
+	if (cses->flags & SESSION4_BACK_CHAN)
 		dir |= NFS4_CDFC4_BACK;
-
-	return nfsd4_new_conn(rqstp, ses, dir);
+	return alloc_conn(rqstp, dir);
 }
 
 /* must be called under client_lock */
@@ -903,20 +896,21 @@
 	spin_unlock(&clp->cl_lock);
 }
 
+static void __free_session(struct nfsd4_session *ses)
+{
+	nfsd4_put_drc_mem(slot_bytes(&ses->se_fchannel), ses->se_fchannel.maxreqs);
+	free_session_slots(ses);
+	kfree(ses);
+}
+
 static void free_session(struct kref *kref)
 {
 	struct nfsd4_session *ses;
-	int mem;
 
 	lockdep_assert_held(&client_lock);
 	ses = container_of(kref, struct nfsd4_session, se_ref);
 	nfsd4_del_conns(ses);
-	spin_lock(&nfsd_drc_lock);
-	mem = ses->se_fchannel.maxreqs * slot_bytes(&ses->se_fchannel);
-	nfsd_drc_mem_used -= mem;
-	spin_unlock(&nfsd_drc_lock);
-	free_session_slots(ses);
-	kfree(ses);
+	__free_session(ses);
 }
 
 void nfsd4_put_session(struct nfsd4_session *ses)
@@ -926,14 +920,10 @@
 	spin_unlock(&client_lock);
 }
 
-static struct nfsd4_session *alloc_init_session(struct svc_rqst *rqstp, struct nfs4_client *clp, struct nfsd4_create_session *cses)
+static struct nfsd4_session *alloc_session(struct nfsd4_channel_attrs *fchan)
 {
 	struct nfsd4_session *new;
-	struct nfsd4_channel_attrs *fchan = &cses->fore_channel;
 	int numslots, slotsize;
-	__be32 status;
-	int idx;
-
 	/*
 	 * Note decreasing slot size below client's request may
 	 * make it difficult for client to function correctly, whereas
@@ -946,12 +936,18 @@
 	if (numslots < 1)
 		return NULL;
 
-	new = alloc_session(slotsize, numslots);
+	new = __alloc_session(slotsize, numslots);
 	if (!new) {
 		nfsd4_put_drc_mem(slotsize, fchan->maxreqs);
 		return NULL;
 	}
 	init_forechannel_attrs(&new->se_fchannel, fchan, numslots, slotsize);
+	return new;
+}
+
+static struct nfsd4_session *init_session(struct svc_rqst *rqstp, struct nfsd4_session *new, struct nfs4_client *clp, struct nfsd4_create_session *cses)
+{
+	int idx;
 
 	new->se_client = clp;
 	gen_sessionid(new);
@@ -970,14 +966,6 @@
 	spin_unlock(&clp->cl_lock);
 	spin_unlock(&client_lock);
 
-	status = nfsd4_new_conn_from_crses(rqstp, new);
-	/* whoops: benny points out, status is ignored! (err, or bogus) */
-	if (status) {
-		spin_lock(&client_lock);
-		free_session(&new->se_ref);
-		spin_unlock(&client_lock);
-		return NULL;
-	}
 	if (cses->flags & SESSION4_BACK_CHAN) {
 		struct sockaddr *sa = svc_addr(rqstp);
 		/*
@@ -990,7 +978,6 @@
 		rpc_copy_addr((struct sockaddr *)&clp->cl_cb_conn.cb_addr, sa);
 		clp->cl_cb_conn.cb_addrlen = svc_addr_len(sa);
 	}
-	nfsd4_probe_callback(clp);
 	return new;
 }
 
@@ -1131,7 +1118,7 @@
 }
 
 static void
-expire_client(struct nfs4_client *clp)
+destroy_client(struct nfs4_client *clp)
 {
 	struct nfs4_openowner *oo;
 	struct nfs4_delegation *dp;
@@ -1165,6 +1152,12 @@
 	spin_unlock(&client_lock);
 }
 
+static void expire_client(struct nfs4_client *clp)
+{
+	nfsd4_client_record_remove(clp);
+	destroy_client(clp);
+}
+
 static void copy_verf(struct nfs4_client *target, nfs4_verifier *source)
 {
 	memcpy(target->cl_verifier.data, source->data,
@@ -1223,10 +1216,26 @@
 	return true;
 }
 
+/*
+ * RFC 3530 language requires clid_inuse be returned when the
+ * "principal" associated with a requests differs from that previously
+ * used.  We use uid, gid's, and gss principal string as our best
+ * approximation.  We also don't want to allow non-gss use of a client
+ * established using gss: in theory cr_principal should catch that
+ * change, but in practice cr_principal can be null even in the gss case
+ * since gssd doesn't always pass down a principal string.
+ */
+static bool is_gss_cred(struct svc_cred *cr)
+{
+	/* Is cr_flavor one of the gss "pseudoflavors"?: */
+	return (cr->cr_flavor > RPC_AUTH_MAXFLAVOR);
+}
+
+
 static bool
 same_creds(struct svc_cred *cr1, struct svc_cred *cr2)
 {
-	if ((cr1->cr_flavor != cr2->cr_flavor)
+	if ((is_gss_cred(cr1) != is_gss_cred(cr2))
 		|| (cr1->cr_uid != cr2->cr_uid)
 		|| (cr1->cr_gid != cr2->cr_gid)
 		|| !groups_equal(cr1->cr_group_info, cr2->cr_group_info))
@@ -1340,13 +1349,15 @@
 }
 
 static struct nfs4_client *
-find_confirmed_client(clientid_t *clid)
+find_confirmed_client(clientid_t *clid, bool sessions)
 {
 	struct nfs4_client *clp;
 	unsigned int idhashval = clientid_hashval(clid->cl_id);
 
 	list_for_each_entry(clp, &conf_id_hashtbl[idhashval], cl_idhash) {
 		if (same_clid(&clp->cl_clientid, clid)) {
+			if ((bool)clp->cl_minorversion != sessions)
+				return NULL;
 			renew_client(clp);
 			return clp;
 		}
@@ -1355,14 +1366,17 @@
 }
 
 static struct nfs4_client *
-find_unconfirmed_client(clientid_t *clid)
+find_unconfirmed_client(clientid_t *clid, bool sessions)
 {
 	struct nfs4_client *clp;
 	unsigned int idhashval = clientid_hashval(clid->cl_id);
 
 	list_for_each_entry(clp, &unconf_id_hashtbl[idhashval], cl_idhash) {
-		if (same_clid(&clp->cl_clientid, clid))
+		if (same_clid(&clp->cl_clientid, clid)) {
+			if ((bool)clp->cl_minorversion != sessions)
+				return NULL;
 			return clp;
+		}
 	}
 	return NULL;
 }
@@ -1651,6 +1665,7 @@
 		status = nfserr_jukebox;
 		goto out;
 	}
+	new->cl_minorversion = 1;
 
 	gen_clid(new);
 	add_to_unconfirmed(new, strhashval);
@@ -1743,67 +1758,71 @@
 	struct sockaddr *sa = svc_addr(rqstp);
 	struct nfs4_client *conf, *unconf;
 	struct nfsd4_session *new;
+	struct nfsd4_conn *conn;
 	struct nfsd4_clid_slot *cs_slot = NULL;
-	bool confirm_me = false;
 	__be32 status = 0;
 
 	if (cr_ses->flags & ~SESSION4_FLAG_MASK_A)
 		return nfserr_inval;
+	if (check_forechannel_attrs(cr_ses->fore_channel))
+		return nfserr_toosmall;
+	new = alloc_session(&cr_ses->fore_channel);
+	if (!new)
+		return nfserr_jukebox;
+	status = nfserr_jukebox;
+	conn = alloc_conn_from_crses(rqstp, cr_ses);
+	if (!conn)
+		goto out_free_session;
 
 	nfs4_lock_state();
-	unconf = find_unconfirmed_client(&cr_ses->clientid);
-	conf = find_confirmed_client(&cr_ses->clientid);
+	unconf = find_unconfirmed_client(&cr_ses->clientid, true);
+	conf = find_confirmed_client(&cr_ses->clientid, true);
 
 	if (conf) {
 		cs_slot = &conf->cl_cs_slot;
 		status = check_slot_seqid(cr_ses->seqid, cs_slot->sl_seqid, 0);
 		if (status == nfserr_replay_cache) {
 			status = nfsd4_replay_create_session(cr_ses, cs_slot);
-			goto out;
+			goto out_free_conn;
 		} else if (cr_ses->seqid != cs_slot->sl_seqid + 1) {
 			status = nfserr_seq_misordered;
-			goto out;
+			goto out_free_conn;
 		}
 	} else if (unconf) {
+		unsigned int hash;
+		struct nfs4_client *old;
 		if (!same_creds(&unconf->cl_cred, &rqstp->rq_cred) ||
 		    !rpc_cmp_addr(sa, (struct sockaddr *) &unconf->cl_addr)) {
 			status = nfserr_clid_inuse;
-			goto out;
+			goto out_free_conn;
 		}
 		cs_slot = &unconf->cl_cs_slot;
 		status = check_slot_seqid(cr_ses->seqid, cs_slot->sl_seqid, 0);
 		if (status) {
 			/* an unconfirmed replay returns misordered */
 			status = nfserr_seq_misordered;
-			goto out;
+			goto out_free_conn;
 		}
-		confirm_me = true;
+		hash = clientstr_hashval(unconf->cl_recdir);
+		old = find_confirmed_client_by_str(unconf->cl_recdir, hash);
+		if (old)
+			expire_client(old);
+		move_to_confirmed(unconf);
 		conf = unconf;
 	} else {
 		status = nfserr_stale_clientid;
-		goto out;
+		goto out_free_conn;
 	}
-
-	/*
-	 * XXX: we should probably set this at creation time, and check
-	 * for consistent minorversion use throughout:
-	 */
-	conf->cl_minorversion = 1;
+	status = nfs_ok;
 	/*
 	 * We do not support RDMA or persistent sessions
 	 */
 	cr_ses->flags &= ~SESSION4_PERSIST;
 	cr_ses->flags &= ~SESSION4_RDMA;
 
-	status = nfserr_toosmall;
-	if (check_forechannel_attrs(cr_ses->fore_channel))
-		goto out;
+	init_session(rqstp, new, conf, cr_ses);
+	nfsd4_init_conn(rqstp, conn, new);
 
-	status = nfserr_jukebox;
-	new = alloc_init_session(rqstp, conf, cr_ses);
-	if (!new)
-		goto out;
-	status = nfs_ok;
 	memcpy(cr_ses->sessionid.data, new->se_sessionid.data,
 	       NFS4_MAX_SESSIONID_LEN);
 	memcpy(&cr_ses->fore_channel, &new->se_fchannel,
@@ -1813,18 +1832,15 @@
 
 	/* cache solo and embedded create sessions under the state lock */
 	nfsd4_cache_create_session(cr_ses, cs_slot, status);
-	if (confirm_me) {
-		unsigned int hash = clientstr_hashval(unconf->cl_recdir);
-		struct nfs4_client *old =
-			find_confirmed_client_by_str(conf->cl_recdir, hash);
-		if (old)
-			expire_client(old);
-		move_to_confirmed(conf);
-	}
 out:
 	nfs4_unlock_state();
 	dprintk("%s returns %d\n", __func__, ntohl(status));
 	return status;
+out_free_conn:
+	free_conn(conn);
+out_free_session:
+	__free_session(new);
+	goto out;
 }
 
 static bool nfsd4_last_compound_op(struct svc_rqst *rqstp)
@@ -1854,6 +1870,7 @@
 		     struct nfsd4_bind_conn_to_session *bcts)
 {
 	__be32 status;
+	struct nfsd4_conn *conn;
 
 	if (!nfsd4_last_compound_op(rqstp))
 		return nfserr_not_only_op;
@@ -1870,9 +1887,13 @@
 		return nfserr_badsession;
 
 	status = nfsd4_map_bcts_dir(&bcts->dir);
-	if (!status)
-		nfsd4_new_conn(rqstp, cstate->session, bcts->dir);
-	return status;
+	if (status)
+		return status;
+	conn = alloc_conn(rqstp, bcts->dir);
+	if (!conn)
+		return nfserr_jukebox;
+	nfsd4_init_conn(rqstp, conn, cstate->session);
+	return nfs_ok;
 }
 
 static bool nfsd4_compound_in_session(struct nfsd4_session *session, struct nfs4_sessionid *sid)
@@ -2085,8 +2106,8 @@
 	__be32 status = 0;
 
 	nfs4_lock_state();
-	unconf = find_unconfirmed_client(&dc->clientid);
-	conf = find_confirmed_client(&dc->clientid);
+	unconf = find_unconfirmed_client(&dc->clientid, true);
+	conf = find_confirmed_client(&dc->clientid, true);
 
 	if (conf) {
 		clp = conf;
@@ -2200,10 +2221,6 @@
 		copy_clid(new, conf);
 	else /* case 4 (new client) or cases 2, 3 (client reboot): */
 		gen_clid(new);
-	/*
-	 * XXX: we should probably set this at creation time, and check
-	 * for consistent minorversion use throughout:
-	 */
 	new->cl_minorversion = 0;
 	gen_callback(new, setclid, rqstp);
 	add_to_unconfirmed(new, strhashval);
@@ -2232,8 +2249,8 @@
 		return nfserr_stale_clientid;
 	nfs4_lock_state();
 
-	conf = find_confirmed_client(clid);
-	unconf = find_unconfirmed_client(clid);
+	conf = find_confirmed_client(clid, false);
+	unconf = find_unconfirmed_client(clid, false);
 	/*
 	 * We try hard to give out unique clientid's, so if we get an
 	 * attempt to confirm the same clientid with a different cred,
@@ -2262,10 +2279,8 @@
 		unsigned int hash = clientstr_hashval(unconf->cl_recdir);
 
 		conf = find_confirmed_client_by_str(unconf->cl_recdir, hash);
-		if (conf) {
-			nfsd4_client_record_remove(conf);
+		if (conf)
 			expire_client(conf);
-		}
 		move_to_confirmed(unconf);
 		nfsd4_probe_callback(unconf);
 	}
@@ -2447,16 +2462,20 @@
 }
 
 static struct nfs4_openowner *
-find_openstateowner_str(unsigned int hashval, struct nfsd4_open *open)
+find_openstateowner_str(unsigned int hashval, struct nfsd4_open *open, bool sessions)
 {
 	struct nfs4_stateowner *so;
 	struct nfs4_openowner *oo;
+	struct nfs4_client *clp;
 
 	list_for_each_entry(so, &ownerstr_hashtbl[hashval], so_strhash) {
 		if (!so->so_is_open_owner)
 			continue;
 		if (same_owner_str(so, &open->op_owner, &open->op_clientid)) {
 			oo = openowner(so);
+			clp = oo->oo_owner.so_client;
+			if ((bool)clp->cl_minorversion != sessions)
+				return NULL;
 			renew_client(oo->oo_owner.so_client);
 			return oo;
 		}
@@ -2600,10 +2619,10 @@
 		return nfserr_jukebox;
 
 	strhashval = ownerstr_hashval(clientid->cl_id, &open->op_owner);
-	oo = find_openstateowner_str(strhashval, open);
+	oo = find_openstateowner_str(strhashval, open, cstate->minorversion);
 	open->op_openowner = oo;
 	if (!oo) {
-		clp = find_confirmed_client(clientid);
+		clp = find_confirmed_client(clientid, cstate->minorversion);
 		if (clp == NULL)
 			return nfserr_expired;
 		goto new_owner;
@@ -2705,11 +2724,6 @@
 	return nfs_ok;
 }
 
-static void nfs4_free_stateid(struct nfs4_ol_stateid *s)
-{
-	kmem_cache_free(stateid_slab, s);
-}
-
 static inline int nfs4_access_to_access(u32 nfs4_access)
 {
 	int flags = 0;
@@ -3087,7 +3101,7 @@
 	if (open->op_file)
 		nfsd4_free_file(open->op_file);
 	if (open->op_stp)
-		nfs4_free_stateid(open->op_stp);
+		free_generic_stateid(open->op_stp);
 }
 
 __be32
@@ -3104,7 +3118,7 @@
 	status = nfserr_stale_clientid;
 	if (STALE_CLIENTID(clid, nn))
 		goto out;
-	clp = find_confirmed_client(clid);
+	clp = find_confirmed_client(clid, cstate->minorversion);
 	status = nfserr_expired;
 	if (clp == NULL) {
 		/* We assume the client took too long to RENEW. */
@@ -3180,7 +3194,6 @@
 		clp = list_entry(pos, struct nfs4_client, cl_lru);
 		dprintk("NFSD: purging unused client (clientid %08x)\n",
 			clp->cl_clientid.cl_id);
-		nfsd4_client_record_remove(clp);
 		expire_client(clp);
 	}
 	spin_lock(&recall_lock);
@@ -3372,7 +3385,7 @@
 	return nfs_ok;
 }
 
-static __be32 nfsd4_lookup_stateid(stateid_t *stateid, unsigned char typemask, struct nfs4_stid **s)
+static __be32 nfsd4_lookup_stateid(stateid_t *stateid, unsigned char typemask, struct nfs4_stid **s, bool sessions)
 {
 	struct nfs4_client *cl;
 	struct nfsd_net *nn = net_generic(&init_net, nfsd_net_id);
@@ -3381,7 +3394,7 @@
 		return nfserr_bad_stateid;
 	if (STALE_STATEID(stateid, nn))
 		return nfserr_stale_stateid;
-	cl = find_confirmed_client(&stateid->si_opaque.so_clid);
+	cl = find_confirmed_client(&stateid->si_opaque.so_clid, sessions);
 	if (!cl)
 		return nfserr_expired;
 	*s = find_stateid_by_type(cl, stateid, typemask);
@@ -3414,7 +3427,7 @@
 	if (ZERO_STATEID(stateid) || ONE_STATEID(stateid))
 		return check_special_stateids(net, current_fh, stateid, flags);
 
-	status = nfsd4_lookup_stateid(stateid, NFS4_DELEG_STID|NFS4_OPEN_STID|NFS4_LOCK_STID, &s);
+	status = nfsd4_lookup_stateid(stateid, NFS4_DELEG_STID|NFS4_OPEN_STID|NFS4_LOCK_STID, &s, cstate->minorversion);
 	if (status)
 		return status;
 	status = check_stateid_generation(stateid, &s->sc_stateid, nfsd4_has_session(cstate));
@@ -3564,7 +3577,7 @@
 		seqid, STATEID_VAL(stateid));
 
 	*stpp = NULL;
-	status = nfsd4_lookup_stateid(stateid, typemask, &s);
+	status = nfsd4_lookup_stateid(stateid, typemask, &s, cstate->minorversion);
 	if (status)
 		return status;
 	*stpp = openlockstateid(s);
@@ -3765,6 +3778,7 @@
 	memcpy(&close->cl_stateid, &stp->st_stid.sc_stateid, sizeof(stateid_t));
 
 	nfsd4_close_open_stateid(stp);
+	release_last_closed_stateid(oo);
 	oo->oo_last_closed_stid = stp;
 
 	if (list_empty(&oo->oo_owner.so_stateids)) {
@@ -3801,7 +3815,7 @@
 	inode = cstate->current_fh.fh_dentry->d_inode;
 
 	nfs4_lock_state();
-	status = nfsd4_lookup_stateid(stateid, NFS4_DELEG_STID, &s);
+	status = nfsd4_lookup_stateid(stateid, NFS4_DELEG_STID, &s, cstate->minorversion);
 	if (status)
 		goto out;
 	dp = delegstateid(s);
@@ -4045,8 +4059,8 @@
 	struct nfs4_lockowner *lock_sop = NULL;
 	struct nfs4_ol_stateid *lock_stp;
 	struct file *filp = NULL;
-	struct file_lock file_lock;
-	struct file_lock conflock;
+	struct file_lock *file_lock = NULL;
+	struct file_lock *conflock = NULL;
 	__be32 status = 0;
 	bool new_state = false;
 	int lkflg;
@@ -4116,21 +4130,28 @@
 	if (!locks_in_grace(SVC_NET(rqstp)) && lock->lk_reclaim)
 		goto out;
 
-	locks_init_lock(&file_lock);
+	file_lock = locks_alloc_lock();
+	if (!file_lock) {
+		dprintk("NFSD: %s: unable to allocate lock!\n", __func__);
+		status = nfserr_jukebox;
+		goto out;
+	}
+
+	locks_init_lock(file_lock);
 	switch (lock->lk_type) {
 		case NFS4_READ_LT:
 		case NFS4_READW_LT:
 			filp = find_readable_file(lock_stp->st_file);
 			if (filp)
 				get_lock_access(lock_stp, NFS4_SHARE_ACCESS_READ);
-			file_lock.fl_type = F_RDLCK;
+			file_lock->fl_type = F_RDLCK;
 			break;
 		case NFS4_WRITE_LT:
 		case NFS4_WRITEW_LT:
 			filp = find_writeable_file(lock_stp->st_file);
 			if (filp)
 				get_lock_access(lock_stp, NFS4_SHARE_ACCESS_WRITE);
-			file_lock.fl_type = F_WRLCK;
+			file_lock->fl_type = F_WRLCK;
 			break;
 		default:
 			status = nfserr_inval;
@@ -4140,22 +4161,23 @@
 		status = nfserr_openmode;
 		goto out;
 	}
-	file_lock.fl_owner = (fl_owner_t)lock_sop;
-	file_lock.fl_pid = current->tgid;
-	file_lock.fl_file = filp;
-	file_lock.fl_flags = FL_POSIX;
-	file_lock.fl_lmops = &nfsd_posix_mng_ops;
+	file_lock->fl_owner = (fl_owner_t)lock_sop;
+	file_lock->fl_pid = current->tgid;
+	file_lock->fl_file = filp;
+	file_lock->fl_flags = FL_POSIX;
+	file_lock->fl_lmops = &nfsd_posix_mng_ops;
+	file_lock->fl_start = lock->lk_offset;
+	file_lock->fl_end = last_byte_offset(lock->lk_offset, lock->lk_length);
+	nfs4_transform_lock_offset(file_lock);
 
-	file_lock.fl_start = lock->lk_offset;
-	file_lock.fl_end = last_byte_offset(lock->lk_offset, lock->lk_length);
-	nfs4_transform_lock_offset(&file_lock);
+	conflock = locks_alloc_lock();
+	if (!conflock) {
+		dprintk("NFSD: %s: unable to allocate lock!\n", __func__);
+		status = nfserr_jukebox;
+		goto out;
+	}
 
-	/*
-	* Try to lock the file in the VFS.
-	* Note: locks.c uses the BKL to protect the inode's lock list.
-	*/
-
-	err = vfs_lock_file(filp, F_SETLK, &file_lock, &conflock);
+	err = vfs_lock_file(filp, F_SETLK, file_lock, conflock);
 	switch (-err) {
 	case 0: /* success! */
 		update_stateid(&lock_stp->st_stid.sc_stateid);
@@ -4166,7 +4188,7 @@
 	case (EAGAIN):		/* conflock holds conflicting lock */
 		status = nfserr_denied;
 		dprintk("NFSD: nfsd4_lock: conflicting lock found!\n");
-		nfs4_set_lock_denied(&conflock, &lock->lk_denied);
+		nfs4_set_lock_denied(conflock, &lock->lk_denied);
 		break;
 	case (EDEADLK):
 		status = nfserr_deadlock;
@@ -4181,6 +4203,10 @@
 		release_lockowner(lock_sop);
 	if (!cstate->replay_owner)
 		nfs4_unlock_state();
+	if (file_lock)
+		locks_free_lock(file_lock);
+	if (conflock)
+		locks_free_lock(conflock);
 	return status;
 }
 
@@ -4209,7 +4235,7 @@
 	    struct nfsd4_lockt *lockt)
 {
 	struct inode *inode;
-	struct file_lock file_lock;
+	struct file_lock *file_lock = NULL;
 	struct nfs4_lockowner *lo;
 	__be32 status;
 	struct nfsd_net *nn = net_generic(&init_net, nfsd_net_id);
@@ -4230,15 +4256,21 @@
 		goto out;
 
 	inode = cstate->current_fh.fh_dentry->d_inode;
-	locks_init_lock(&file_lock);
+	file_lock = locks_alloc_lock();
+	if (!file_lock) {
+		dprintk("NFSD: %s: unable to allocate lock!\n", __func__);
+		status = nfserr_jukebox;
+		goto out;
+	}
+	locks_init_lock(file_lock);
 	switch (lockt->lt_type) {
 		case NFS4_READ_LT:
 		case NFS4_READW_LT:
-			file_lock.fl_type = F_RDLCK;
+			file_lock->fl_type = F_RDLCK;
 		break;
 		case NFS4_WRITE_LT:
 		case NFS4_WRITEW_LT:
-			file_lock.fl_type = F_WRLCK;
+			file_lock->fl_type = F_WRLCK;
 		break;
 		default:
 			dprintk("NFSD: nfs4_lockt: bad lock type!\n");
@@ -4248,25 +4280,27 @@
 
 	lo = find_lockowner_str(inode, &lockt->lt_clientid, &lockt->lt_owner);
 	if (lo)
-		file_lock.fl_owner = (fl_owner_t)lo;
-	file_lock.fl_pid = current->tgid;
-	file_lock.fl_flags = FL_POSIX;
+		file_lock->fl_owner = (fl_owner_t)lo;
+	file_lock->fl_pid = current->tgid;
+	file_lock->fl_flags = FL_POSIX;
 
-	file_lock.fl_start = lockt->lt_offset;
-	file_lock.fl_end = last_byte_offset(lockt->lt_offset, lockt->lt_length);
+	file_lock->fl_start = lockt->lt_offset;
+	file_lock->fl_end = last_byte_offset(lockt->lt_offset, lockt->lt_length);
 
-	nfs4_transform_lock_offset(&file_lock);
+	nfs4_transform_lock_offset(file_lock);
 
-	status = nfsd_test_lock(rqstp, &cstate->current_fh, &file_lock);
+	status = nfsd_test_lock(rqstp, &cstate->current_fh, file_lock);
 	if (status)
 		goto out;
 
-	if (file_lock.fl_type != F_UNLCK) {
+	if (file_lock->fl_type != F_UNLCK) {
 		status = nfserr_denied;
-		nfs4_set_lock_denied(&file_lock, &lockt->lt_denied);
+		nfs4_set_lock_denied(file_lock, &lockt->lt_denied);
 	}
 out:
 	nfs4_unlock_state();
+	if (file_lock)
+		locks_free_lock(file_lock);
 	return status;
 }
 
@@ -4276,7 +4310,7 @@
 {
 	struct nfs4_ol_stateid *stp;
 	struct file *filp = NULL;
-	struct file_lock file_lock;
+	struct file_lock *file_lock = NULL;
 	__be32 status;
 	int err;
 						        
@@ -4298,23 +4332,29 @@
 		status = nfserr_lock_range;
 		goto out;
 	}
-	BUG_ON(!filp);
-	locks_init_lock(&file_lock);
-	file_lock.fl_type = F_UNLCK;
-	file_lock.fl_owner = (fl_owner_t)lockowner(stp->st_stateowner);
-	file_lock.fl_pid = current->tgid;
-	file_lock.fl_file = filp;
-	file_lock.fl_flags = FL_POSIX; 
-	file_lock.fl_lmops = &nfsd_posix_mng_ops;
-	file_lock.fl_start = locku->lu_offset;
+	file_lock = locks_alloc_lock();
+	if (!file_lock) {
+		dprintk("NFSD: %s: unable to allocate lock!\n", __func__);
+		status = nfserr_jukebox;
+		goto out;
+	}
+	locks_init_lock(file_lock);
+	file_lock->fl_type = F_UNLCK;
+	file_lock->fl_owner = (fl_owner_t)lockowner(stp->st_stateowner);
+	file_lock->fl_pid = current->tgid;
+	file_lock->fl_file = filp;
+	file_lock->fl_flags = FL_POSIX;
+	file_lock->fl_lmops = &nfsd_posix_mng_ops;
+	file_lock->fl_start = locku->lu_offset;
 
-	file_lock.fl_end = last_byte_offset(locku->lu_offset, locku->lu_length);
-	nfs4_transform_lock_offset(&file_lock);
+	file_lock->fl_end = last_byte_offset(locku->lu_offset,
+						locku->lu_length);
+	nfs4_transform_lock_offset(file_lock);
 
 	/*
 	*  Try to unlock the file in the VFS.
 	*/
-	err = vfs_lock_file(filp, F_SETLK, &file_lock, NULL);
+	err = vfs_lock_file(filp, F_SETLK, file_lock, NULL);
 	if (err) {
 		dprintk("NFSD: nfs4_locku: vfs_lock_file failed!\n");
 		goto out_nfserr;
@@ -4328,6 +4368,8 @@
 out:
 	if (!cstate->replay_owner)
 		nfs4_unlock_state();
+	if (file_lock)
+		locks_free_lock(file_lock);
 	return status;
 
 out_nfserr:
@@ -4501,12 +4543,12 @@
 * Called from OPEN. Look for clientid in reclaim list.
 */
 __be32
-nfs4_check_open_reclaim(clientid_t *clid)
+nfs4_check_open_reclaim(clientid_t *clid, bool sessions)
 {
 	struct nfs4_client *clp;
 
 	/* find clientid in conf_id_hashtbl */
-	clp = find_confirmed_client(clid);
+	clp = find_confirmed_client(clid, sessions);
 	if (clp == NULL)
 		return nfserr_reclaim_bad;
 
@@ -4522,7 +4564,6 @@
 
 	nfs4_lock_state();
 	list_for_each_entry_safe(clp, next, &client_lru, cl_lru) {
-		nfsd4_client_record_remove(clp);
 		expire_client(clp);
 		if (++count == num)
 			break;
@@ -4582,7 +4623,7 @@
 	printk(KERN_INFO "NFSD: Forgot %d open owners", count);
 }
 
-int nfsd_process_n_delegations(u64 num, struct list_head *list)
+static int nfsd_process_n_delegations(u64 num, struct list_head *list)
 {
 	int i, count = 0;
 	struct nfs4_file *fp, *fnext;
@@ -4747,11 +4788,11 @@
 	for (i = 0; i < CLIENT_HASH_SIZE; i++) {
 		while (!list_empty(&conf_id_hashtbl[i])) {
 			clp = list_entry(conf_id_hashtbl[i].next, struct nfs4_client, cl_idhash);
-			expire_client(clp);
+			destroy_client(clp);
 		}
 		while (!list_empty(&unconf_str_hashtbl[i])) {
 			clp = list_entry(unconf_str_hashtbl[i].next, struct nfs4_client, cl_strhash);
-			expire_client(clp);
+			destroy_client(clp);
 		}
 	}
 	INIT_LIST_HEAD(&reaplist);
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 6322df3..fd548d1 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -2659,7 +2659,7 @@
 		RESERVE_SPACE(NFS4_MAX_SESSIONID_LEN + 8);
 		WRITEMEM(bcts->sessionid.data, NFS4_MAX_SESSIONID_LEN);
 		WRITE32(bcts->dir);
-		/* XXX: ? */
+		/* Sorry, we do not yet support RDMA over 4.1: */
 		WRITE32(0);
 		ADJUST_ARGS();
 	}
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index fa49cff..dab350d 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -406,7 +406,7 @@
 			return rv;
 		if (newthreads < 0)
 			return -EINVAL;
-		rv = nfsd_svc(NFS_PORT, newthreads);
+		rv = nfsd_svc(newthreads);
 		if (rv < 0)
 			return rv;
 	} else
@@ -683,25 +683,6 @@
 }
 
 /*
- * A '-' followed by the 'name' of a socket means we close the socket.
- */
-static ssize_t __write_ports_delfd(char *buf)
-{
-	char *toclose;
-	int len = 0;
-
-	toclose = kstrdup(buf + 1, GFP_KERNEL);
-	if (toclose == NULL)
-		return -ENOMEM;
-
-	if (nfsd_serv != NULL)
-		len = svc_sock_names(nfsd_serv, buf,
-					SIMPLE_TRANSACTION_LIMIT, toclose);
-	kfree(toclose);
-	return len;
-}
-
-/*
  * A transport listener is added by writing it's transport name and
  * a port number.
  */
@@ -712,7 +693,7 @@
 	int port, err;
 	struct net *net = &init_net;
 
-	if (sscanf(buf, "%15s %4u", transport, &port) != 2)
+	if (sscanf(buf, "%15s %5u", transport, &port) != 2)
 		return -EINVAL;
 
 	if (port < 1 || port > USHRT_MAX)
@@ -746,31 +727,6 @@
 	return err;
 }
 
-/*
- * A transport listener is removed by writing a "-", it's transport
- * name, and it's port number.
- */
-static ssize_t __write_ports_delxprt(char *buf)
-{
-	struct svc_xprt *xprt;
-	char transport[16];
-	int port;
-
-	if (sscanf(&buf[1], "%15s %4u", transport, &port) != 2)
-		return -EINVAL;
-
-	if (port < 1 || port > USHRT_MAX || nfsd_serv == NULL)
-		return -EINVAL;
-
-	xprt = svc_find_xprt(nfsd_serv, transport, &init_net, AF_UNSPEC, port);
-	if (xprt == NULL)
-		return -ENOTCONN;
-
-	svc_close_xprt(xprt);
-	svc_xprt_put(xprt);
-	return 0;
-}
-
 static ssize_t __write_ports(struct file *file, char *buf, size_t size)
 {
 	if (size == 0)
@@ -779,15 +735,9 @@
 	if (isdigit(buf[0]))
 		return __write_ports_addfd(buf);
 
-	if (buf[0] == '-' && isdigit(buf[1]))
-		return __write_ports_delfd(buf);
-
 	if (isalpha(buf[0]))
 		return __write_ports_addxprt(buf);
 
-	if (buf[0] == '-' && isalpha(buf[1]))
-		return __write_ports_delxprt(buf);
-
 	return -EINVAL;
 }
 
@@ -825,21 +775,6 @@
  * OR
  *
  * Input:
- *			buf:		C string containing a "-" followed
- *					by an integer value representing a
- *					previously passed in socket file
- *					descriptor
- *			size:		non-zero length of C string in @buf
- * Output:
- *	On success:	NFS service no longer listens on that socket;
- *			passed-in buffer filled with a '\n'-terminated C
- *			string containing a unique name of the listener;
- *			return code is the size in bytes of the string
- *	On error:	return code is a negative errno value
- *
- * OR
- *
- * Input:
  *			buf:		C string containing a transport
  *					name and an unsigned integer value
  *					representing the port to listen on,
@@ -848,19 +783,6 @@
  * Output:
  *	On success:	returns zero; NFS service is started
  *	On error:	return code is a negative errno value
- *
- * OR
- *
- * Input:
- *			buf:		C string containing a "-" followed
- *					by a transport name and an unsigned
- *					integer value representing the port
- *					to listen on, separated by whitespace
- *			size:		non-zero length of C string in @buf
- * Output:
- *	On success:	returns zero; NFS service no longer listens
- *			on that transport
- *	On error:	return code is a negative errno value
  */
 static ssize_t write_ports(struct file *file, char *buf, size_t size)
 {
@@ -1008,8 +930,6 @@
 	return nfsd4_write_time(file, buf, size, &nfsd4_grace);
 }
 
-extern char *nfs4_recoverydir(void);
-
 static ssize_t __write_recoverydir(struct file *file, char *buf, size_t size)
 {
 	char *mesg = buf;
diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
index 2244222..80d5ce4 100644
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -65,7 +65,7 @@
 /*
  * Function prototypes.
  */
-int		nfsd_svc(unsigned short port, int nrservs);
+int		nfsd_svc(int nrservs);
 int		nfsd_dispatch(struct svc_rqst *rqstp, __be32 *statp);
 
 int		nfsd_nrthreads(void);
@@ -124,6 +124,7 @@
 void nfs4_state_shutdown(void);
 void nfs4_reset_lease(time_t leasetime);
 int nfs4_reset_recoverydir(char *recdir);
+char * nfs4_recoverydir(void);
 #else
 static inline void nfs4_state_init(void) { }
 static inline int nfsd4_init_slabs(void) { return 0; }
@@ -132,6 +133,7 @@
 static inline void nfs4_state_shutdown(void) { }
 static inline void nfs4_reset_lease(time_t leasetime) { }
 static inline int nfs4_reset_recoverydir(char *recdir) { return 0; }
+static inline char * nfs4_recoverydir(void) {return NULL; }
 #endif
 
 /*
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index 240473c..2013aa00 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -183,18 +183,18 @@
 	return rv;
 }
 
-static int nfsd_init_socks(int port)
+static int nfsd_init_socks(void)
 {
 	int error;
 	if (!list_empty(&nfsd_serv->sv_permsocks))
 		return 0;
 
-	error = svc_create_xprt(nfsd_serv, "udp", &init_net, PF_INET, port,
+	error = svc_create_xprt(nfsd_serv, "udp", &init_net, PF_INET, NFS_PORT,
 					SVC_SOCK_DEFAULTS);
 	if (error < 0)
 		return error;
 
-	error = svc_create_xprt(nfsd_serv, "tcp", &init_net, PF_INET, port,
+	error = svc_create_xprt(nfsd_serv, "tcp", &init_net, PF_INET, NFS_PORT,
 					SVC_SOCK_DEFAULTS);
 	if (error < 0)
 		return error;
@@ -204,7 +204,7 @@
 
 static bool nfsd_up = false;
 
-static int nfsd_startup(unsigned short port, int nrservs)
+static int nfsd_startup(int nrservs)
 {
 	int ret;
 
@@ -218,7 +218,7 @@
 	ret = nfsd_racache_init(2*nrservs);
 	if (ret)
 		return ret;
-	ret = nfsd_init_socks(port);
+	ret = nfsd_init_socks();
 	if (ret)
 		goto out_racache;
 	ret = lockd_up(&init_net);
@@ -436,7 +436,7 @@
  * this is the first time nrservs is nonzero.
  */
 int
-nfsd_svc(unsigned short port, int nrservs)
+nfsd_svc(int nrservs)
 {
 	int	error;
 	bool	nfsd_up_before;
@@ -458,7 +458,7 @@
 
 	nfsd_up_before = nfsd_up;
 
-	error = nfsd_startup(port, nrservs);
+	error = nfsd_startup(nrservs);
 	if (error)
 		goto out_destroy;
 	error = svc_set_num_threads(nfsd_serv, NULL, nrservs);
@@ -487,7 +487,7 @@
 nfsd(void *vrqstp)
 {
 	struct svc_rqst *rqstp = (struct svc_rqst *) vrqstp;
-	int err, preverr = 0;
+	int err;
 
 	/* Lock module and set up kernel thread */
 	mutex_lock(&nfsd_mutex);
@@ -534,16 +534,6 @@
 			;
 		if (err == -EINTR)
 			break;
-		else if (err < 0) {
-			if (err != preverr) {
-				printk(KERN_WARNING "%s: unexpected error "
-					"from svc_recv (%d)\n", __func__, -err);
-				preverr = err;
-			}
-			schedule_timeout_uninterruptible(HZ);
-			continue;
-		}
-
 		validate_process_creds();
 		svc_process(rqstp);
 		validate_process_creds();
diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h
index 22bd0a6..e036894 100644
--- a/fs/nfsd/state.h
+++ b/fs/nfsd/state.h
@@ -373,11 +373,7 @@
 	return container_of(so, struct nfs4_lockowner, lo_owner);
 }
 
-/*
-*  nfs4_file: a file opened by some number of (open) nfs4_stateowners.
-*    o fi_perfile list is used to search for conflicting 
-*      share_acces, share_deny on the file.
-*/
+/* nfs4_file: a file opened by some number of (open) nfs4_stateowners. */
 struct nfs4_file {
 	atomic_t		fi_ref;
 	struct list_head        fi_hash;    /* hash by "struct inode *" */
@@ -459,7 +455,7 @@
 extern int nfs4_in_grace(void);
 extern void nfs4_release_reclaim(void);
 extern struct nfs4_client_reclaim *nfsd4_find_reclaim_client(struct nfs4_client *crp);
-extern __be32 nfs4_check_open_reclaim(clientid_t *clid);
+extern __be32 nfs4_check_open_reclaim(clientid_t *clid, bool sessions);
 extern void nfs4_free_openowner(struct nfs4_openowner *);
 extern void nfs4_free_lockowner(struct nfs4_lockowner *);
 extern int set_callback_cred(void);
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 3f67b8e..c120b48 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1581,7 +1581,7 @@
 	 */
 
 	oldfs = get_fs(); set_fs(KERNEL_DS);
-	host_err = inode->i_op->readlink(path.dentry, buf, *lenp);
+	host_err = inode->i_op->readlink(path.dentry, (char __user *)buf, *lenp);
 	set_fs(oldfs);
 
 	if (host_err < 0)
diff --git a/fs/open.c b/fs/open.c
index 44da0fe..59071f5 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -478,7 +478,7 @@
 
 	file = fget(fd);
 	if (file) {
-		audit_inode(NULL, file->f_path.dentry);
+		audit_inode(NULL, file->f_path.dentry, 0);
 		err = chmod_common(&file->f_path, mode);
 		fput(file);
 	}
@@ -588,7 +588,7 @@
 	error = mnt_want_write_file(f.file);
 	if (error)
 		goto out_fput;
-	audit_inode(NULL, f.file->f_path.dentry);
+	audit_inode(NULL, f.file->f_path.dentry, 0);
 	error = chown_common(&f.file->f_path, user, group);
 	mnt_drop_write_file(f.file);
 out_fput:
@@ -859,6 +859,24 @@
 }
 
 /**
+ * file_open_name - open file and return file pointer
+ *
+ * @name:	struct filename containing path to open
+ * @flags:	open flags as per the open(2) second argument
+ * @mode:	mode for the new file if O_CREAT is set, else ignored
+ *
+ * This is the helper to open a file from kernelspace if you really
+ * have to.  But in generally you should not do this, so please move
+ * along, nothing to see here..
+ */
+struct file *file_open_name(struct filename *name, int flags, umode_t mode)
+{
+	struct open_flags op;
+	int lookup = build_open_flags(flags, mode, &op);
+	return do_filp_open(AT_FDCWD, name, &op, lookup);
+}
+
+/**
  * filp_open - open file and return file pointer
  *
  * @filename:	path to open
@@ -871,9 +889,8 @@
  */
 struct file *filp_open(const char *filename, int flags, umode_t mode)
 {
-	struct open_flags op;
-	int lookup = build_open_flags(flags, mode, &op);
-	return do_filp_open(AT_FDCWD, filename, &op, lookup);
+	struct filename name = {.name = filename};
+	return file_open_name(&name, flags, mode);
 }
 EXPORT_SYMBOL(filp_open);
 
@@ -895,7 +912,7 @@
 {
 	struct open_flags op;
 	int lookup = build_open_flags(flags, mode, &op);
-	char *tmp = getname(filename);
+	struct filename *tmp = getname(filename);
 	int fd = PTR_ERR(tmp);
 
 	if (!IS_ERR(tmp)) {
diff --git a/fs/proc/base.c b/fs/proc/base.c
index ef5c84b..144a967 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2258,7 +2258,8 @@
 	pid_t tgid = task_tgid_nr_ns(current, ns);
 	char *name = ERR_PTR(-ENOENT);
 	if (tgid) {
-		name = __getname();
+		/* 11 for max length of signed int in decimal + NULL term */
+		name = kmalloc(12, GFP_KERNEL);
 		if (!name)
 			name = ERR_PTR(-ENOMEM);
 		else
@@ -2273,7 +2274,7 @@
 {
 	char *s = nd_get_link(nd);
 	if (!IS_ERR(s))
-		__putname(s);
+		kfree(s);
 }
 
 static const struct inode_operations proc_self_inode_operations = {
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index ff0135d..af1661f 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -331,11 +331,11 @@
 #ifdef CONFIG_BLOCK
 	struct block_device *bdev;
 	struct super_block *sb;
-	char *tmp = getname(special);
+	struct filename *tmp = getname(special);
 
 	if (IS_ERR(tmp))
 		return ERR_CAST(tmp);
-	bdev = lookup_bdev(tmp);
+	bdev = lookup_bdev(tmp->name);
 	putname(tmp);
 	if (IS_ERR(bdev))
 		return ERR_CAST(bdev);
diff --git a/fs/xattr.c b/fs/xattr.c
index 1780f06..e164ddd 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -412,7 +412,7 @@
 	if (!f.file)
 		return error;
 	dentry = f.file->f_path.dentry;
-	audit_inode(NULL, dentry);
+	audit_inode(NULL, dentry, 0);
 	error = mnt_want_write_file(f.file);
 	if (!error) {
 		error = setxattr(dentry, name, value, size, flags);
@@ -507,7 +507,7 @@
 
 	if (!f.file)
 		return error;
-	audit_inode(NULL, f.file->f_path.dentry);
+	audit_inode(NULL, f.file->f_path.dentry, 0);
 	error = getxattr(f.file->f_path.dentry, name, value, size);
 	fdput(f);
 	return error;
@@ -586,7 +586,7 @@
 
 	if (!f.file)
 		return error;
-	audit_inode(NULL, f.file->f_path.dentry);
+	audit_inode(NULL, f.file->f_path.dentry, 0);
 	error = listxattr(f.file->f_path.dentry, list, size);
 	fdput(f);
 	return error;
@@ -655,7 +655,7 @@
 	if (!f.file)
 		return error;
 	dentry = f.file->f_path.dentry;
-	audit_inode(NULL, dentry);
+	audit_inode(NULL, dentry, 0);
 	error = mnt_want_write_file(f.file);
 	if (!error) {
 		error = removexattr(dentry, name);
diff --git a/fs/xattr_acl.c b/fs/xattr_acl.c
index 11efd83..9fbea87 100644
--- a/fs/xattr_acl.c
+++ b/fs/xattr_acl.c
@@ -45,7 +45,7 @@
 			break;
 		case ACL_GROUP:
 			gid = make_kgid(from, le32_to_cpu(entry->e_id));
-			entry->e_id = cpu_to_le32(from_kuid(to, uid));
+			entry->e_id = cpu_to_le32(from_kgid(to, gid));
 			break;
 		default:
 			break;
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index d114db9..5b57367 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -22,390 +22,10 @@
 
 ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
 		  $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),)
-header-y += a.out.h
 endif
 ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
 		  $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),)
-header-y += kvm.h
 endif
 ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \
 		  $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),)
-header-y += kvm_para.h
 endif
-
-header-y += acct.h
-header-y += adb.h
-header-y += adfs_fs.h
-header-y += affs_hardblocks.h
-header-y += agpgart.h
-header-y += aio_abi.h
-header-y += apm_bios.h
-header-y += arcfb.h
-header-y += atalk.h
-header-y += atm.h
-header-y += atm_eni.h
-header-y += atm_he.h
-header-y += atm_idt77105.h
-header-y += atm_nicstar.h
-header-y += atm_tcp.h
-header-y += atm_zatm.h
-header-y += atmapi.h
-header-y += atmarp.h
-header-y += atmbr2684.h
-header-y += atmclip.h
-header-y += atmdev.h
-header-y += atmioc.h
-header-y += atmlec.h
-header-y += atmmpc.h
-header-y += atmppp.h
-header-y += atmsap.h
-header-y += atmsvc.h
-header-y += audit.h
-header-y += auto_fs.h
-header-y += auto_fs4.h
-header-y += auxvec.h
-header-y += ax25.h
-header-y += b1lli.h
-header-y += baycom.h
-header-y += bfs_fs.h
-header-y += binfmts.h
-header-y += blk_types.h
-header-y += blkpg.h
-header-y += blktrace_api.h
-header-y += bpqether.h
-header-y += bsg.h
-header-y += can.h
-header-y += capability.h
-header-y += capi.h
-header-y += cciss_defs.h
-header-y += cciss_ioctl.h
-header-y += cdrom.h
-header-y += cgroupstats.h
-header-y += chio.h
-header-y += cm4000_cs.h
-header-y += cn_proc.h
-header-y += coda.h
-header-y += coda_psdev.h
-header-y += coff.h
-header-y += connector.h
-header-y += const.h
-header-y += cramfs_fs.h
-header-y += cuda.h
-header-y += cyclades.h
-header-y += cycx_cfm.h
-header-y += dcbnl.h
-header-y += dccp.h
-header-y += dlm.h
-header-y += dlm_device.h
-header-y += dlm_netlink.h
-header-y += dlm_plock.h
-header-y += dlmconstants.h
-header-y += dm-ioctl.h
-header-y += dm-log-userspace.h
-header-y += dn.h
-header-y += dqblk_xfs.h
-header-y += edd.h
-header-y += efs_fs_sb.h
-header-y += elf-em.h
-header-y += elf-fdpic.h
-header-y += elf.h
-header-y += elfcore.h
-header-y += errno.h
-header-y += errqueue.h
-header-y += ethtool.h
-header-y += eventpoll.h
-header-y += fadvise.h
-header-y += falloc.h
-header-y += fanotify.h
-header-y += fb.h
-header-y += fcntl.h
-header-y += fd.h
-header-y += fdreg.h
-header-y += fib_rules.h
-header-y += fiemap.h
-header-y += filter.h
-header-y += firewire-cdev.h
-header-y += firewire-constants.h
-header-y += flat.h
-header-y += fs.h
-header-y += fsl_hypervisor.h
-header-y += fuse.h
-header-y += futex.h
-header-y += gameport.h
-header-y += gen_stats.h
-header-y += genetlink.h
-header-y += gfs2_ondisk.h
-header-y += gigaset_dev.h
-header-y += hdlc.h
-header-y += hdlcdrv.h
-header-y += hdreg.h
-header-y += hid.h
-header-y += hiddev.h
-header-y += hidraw.h
-header-y += hpet.h
-header-y += hysdn_if.h
-header-y += i2c-dev.h
-header-y += i2c.h
-header-y += i2o-dev.h
-header-y += i8k.h
-header-y += icmp.h
-header-y += icmpv6.h
-header-y += if.h
-header-y += if_addr.h
-header-y += if_addrlabel.h
-header-y += if_alg.h
-header-y += if_arcnet.h
-header-y += if_arp.h
-header-y += if_bonding.h
-header-y += if_bridge.h
-header-y += if_cablemodem.h
-header-y += if_eql.h
-header-y += if_ether.h
-header-y += if_fc.h
-header-y += if_fddi.h
-header-y += if_frad.h
-header-y += if_hippi.h
-header-y += if_infiniband.h
-header-y += if_link.h
-header-y += if_ltalk.h
-header-y += if_packet.h
-header-y += if_phonet.h
-header-y += if_plip.h
-header-y += if_ppp.h
-header-y += if_pppol2tp.h
-header-y += if_pppox.h
-header-y += if_slip.h
-header-y += if_team.h
-header-y += if_tun.h
-header-y += if_tunnel.h
-header-y += if_vlan.h
-header-y += if_x25.h
-header-y += igmp.h
-header-y += in.h
-header-y += in6.h
-header-y += in_route.h
-header-y += sock_diag.h
-header-y += inet_diag.h
-header-y += unix_diag.h
-header-y += packet_diag.h
-header-y += inotify.h
-header-y += input.h
-header-y += ioctl.h
-header-y += ip.h
-header-y += ip6_tunnel.h
-header-y += ip_vs.h
-header-y += ipc.h
-header-y += ipmi.h
-header-y += ipmi_msgdefs.h
-header-y += ipsec.h
-header-y += ipv6.h
-header-y += ipv6_route.h
-header-y += ipx.h
-header-y += irda.h
-header-y += irqnr.h
-header-y += isdn.h
-header-y += isdn_divertif.h
-header-y += isdn_ppp.h
-header-y += isdnif.h
-header-y += iso_fs.h
-header-y += ivtv.h
-header-y += ivtvfb.h
-header-y += ixjuser.h
-header-y += jffs2.h
-header-y += joystick.h
-header-y += kd.h
-header-y += kdev_t.h
-header-y += kernel.h
-header-y += kernelcapi.h
-header-y += kernel-page-flags.h
-header-y += kexec.h
-header-y += keyboard.h
-header-y += keyctl.h
-header-y += l2tp.h
-header-y += limits.h
-header-y += llc.h
-header-y += loop.h
-header-y += lp.h
-header-y += magic.h
-header-y += major.h
-header-y += map_to_7segment.h
-header-y += matroxfb.h
-header-y += mdio.h
-header-y += media.h
-header-y += mei.h
-header-y += mempolicy.h
-header-y += meye.h
-header-y += mii.h
-header-y += minix_fs.h
-header-y += mman.h
-header-y += mmtimer.h
-header-y += mqueue.h
-header-y += mroute.h
-header-y += mroute6.h
-header-y += msdos_fs.h
-header-y += msg.h
-header-y += mtio.h
-header-y += n_r3964.h
-header-y += nbd.h
-header-y += ncp.h
-header-y += ncp_fs.h
-header-y += ncp_mount.h
-header-y += ncp_no.h
-header-y += neighbour.h
-header-y += net.h
-header-y += net_dropmon.h
-header-y += net_tstamp.h
-header-y += netdevice.h
-header-y += netfilter.h
-header-y += netfilter_arp.h
-header-y += netfilter_bridge.h
-header-y += netfilter_decnet.h
-header-y += netfilter_ipv4.h
-header-y += netfilter_ipv6.h
-header-y += netlink.h
-header-y += netrom.h
-header-y += nfc.h
-header-y += nfs.h
-header-y += nfs2.h
-header-y += nfs3.h
-header-y += nfs4.h
-header-y += nfs4_mount.h
-header-y += nfs_fs.h
-header-y += nfs_idmap.h
-header-y += nfs_mount.h
-header-y += nfsacl.h
-header-y += nl80211.h
-header-y += nubus.h
-header-y += nvram.h
-header-y += omap3isp.h
-header-y += omapfb.h
-header-y += oom.h
-header-y += param.h
-header-y += parport.h
-header-y += patchkey.h
-header-y += pci.h
-header-y += pci_regs.h
-header-y += perf_event.h
-header-y += personality.h
-header-y += pfkeyv2.h
-header-y += pg.h
-header-y += phantom.h
-header-y += phonet.h
-header-y += pkt_cls.h
-header-y += pkt_sched.h
-header-y += pktcdvd.h
-header-y += pmu.h
-header-y += poll.h
-header-y += posix_types.h
-header-y += ppdev.h
-header-y += ppp-comp.h
-header-y += ppp-ioctl.h
-header-y += ppp_defs.h
-header-y += pps.h
-header-y += prctl.h
-header-y += ptp_clock.h
-header-y += ptrace.h
-header-y += qnx4_fs.h
-header-y += qnxtypes.h
-header-y += quota.h
-header-y += radeonfb.h
-header-y += random.h
-header-y += raw.h
-header-y += rds.h
-header-y += reboot.h
-header-y += reiserfs_fs.h
-header-y += reiserfs_xattr.h
-header-y += resource.h
-header-y += rfkill.h
-header-y += romfs_fs.h
-header-y += rose.h
-header-y += route.h
-header-y += rtc.h
-header-y += rtnetlink.h
-header-y += scc.h
-header-y += sched.h
-header-y += screen_info.h
-header-y += sdla.h
-header-y += seccomp.h
-header-y += securebits.h
-header-y += selinux_netlink.h
-header-y += sem.h
-header-y += serial.h
-header-y += serial_core.h
-header-y += serial_reg.h
-header-y += serio.h
-header-y += shm.h
-header-y += signal.h
-header-y += signalfd.h
-header-y += snmp.h
-header-y += socket.h
-header-y += sockios.h
-header-y += som.h
-header-y += sonet.h
-header-y += sonypi.h
-header-y += sound.h
-header-y += soundcard.h
-header-y += stat.h
-header-y += stddef.h
-header-y += string.h
-header-y += suspend_ioctls.h
-header-y += swab.h
-header-y += synclink.h
-header-y += sysctl.h
-header-y += sysinfo.h
-header-y += taskstats.h
-header-y += tcp.h
-header-y += tcp_metrics.h
-header-y += telephony.h
-header-y += termios.h
-header-y += time.h
-header-y += times.h
-header-y += timex.h
-header-y += tiocl.h
-header-y += tipc.h
-header-y += tipc_config.h
-header-y += toshiba.h
-header-y += tty.h
-header-y += tty_flags.h
-header-y += types.h
-header-y += udf_fs_i.h
-header-y += udp.h
-header-y += uhid.h
-header-y += uinput.h
-header-y += uio.h
-header-y += ultrasound.h
-header-y += un.h
-header-y += unistd.h
-header-y += usbdevice_fs.h
-header-y += utime.h
-header-y += utsname.h
-header-y += uuid.h
-header-y += uvcvideo.h
-header-y += v4l2-common.h
-header-y += v4l2-controls.h
-header-y += v4l2-dv-timings.h
-header-y += v4l2-mediabus.h
-header-y += v4l2-subdev.h
-header-y += veth.h
-header-y += vfio.h
-header-y += vhost.h
-header-y += videodev2.h
-header-y += virtio_9p.h
-header-y += virtio_balloon.h
-header-y += virtio_blk.h
-header-y += virtio_config.h
-header-y += virtio_console.h
-header-y += virtio_ids.h
-header-y += virtio_net.h
-header-y += virtio_pci.h
-header-y += virtio_ring.h
-header-y += virtio_rng.h
-header-y += vt.h
-header-y += wait.h
-header-y += wanrouter.h
-header-y += watchdog.h
-header-y += wimax.h
-header-y += wireless.h
-header-y += x25.h
-header-y += xattr.h
-header-y += xfrm.h
diff --git a/include/linux/a.out.h b/include/linux/a.out.h
index e86dfca..220f143 100644
--- a/include/linux/a.out.h
+++ b/include/linux/a.out.h
@@ -1,278 +1,84 @@
 #ifndef __A_OUT_GNU_H__
 #define __A_OUT_GNU_H__
 
-#define __GNU_EXEC_MACROS__
-
-#ifndef __STRUCT_EXEC_OVERRIDE__
-
-#include <asm/a.out.h>
-
-#endif /* __STRUCT_EXEC_OVERRIDE__ */
+#include <uapi/linux/a.out.h>
 
 #ifndef __ASSEMBLY__
-
-/* these go in the N_MACHTYPE field */
-enum machine_type {
 #if defined (M_OLDSUN2)
-  M__OLDSUN2 = M_OLDSUN2,
 #else
-  M_OLDSUN2 = 0,
 #endif
 #if defined (M_68010)
-  M__68010 = M_68010,
 #else
-  M_68010 = 1,
 #endif
 #if defined (M_68020)
-  M__68020 = M_68020,
 #else
-  M_68020 = 2,
 #endif
 #if defined (M_SPARC)
-  M__SPARC = M_SPARC,
 #else
-  M_SPARC = 3,
 #endif
-  /* skip a bunch so we don't run into any of sun's numbers */
-  M_386 = 100,
-  M_MIPS1 = 151,	/* MIPS R3000/R3000 binary */
-  M_MIPS2 = 152		/* MIPS R6000/R4000 binary */
-};
-
 #if !defined (N_MAGIC)
-#define N_MAGIC(exec) ((exec).a_info & 0xffff)
 #endif
-#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
-#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
-#define N_SET_INFO(exec, magic, type, flags) \
-	((exec).a_info = ((magic) & 0xffff) \
-	 | (((int)(type) & 0xff) << 16) \
-	 | (((flags) & 0xff) << 24))
-#define N_SET_MAGIC(exec, magic) \
-	((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
-
-#define N_SET_MACHTYPE(exec, machtype) \
-	((exec).a_info = \
-	 ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
-
-#define N_SET_FLAGS(exec, flags) \
-	((exec).a_info = \
-	 ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
-
-/* Code indicating object file or impure executable.  */
-#define OMAGIC 0407
-/* Code indicating pure executable.  */
-#define NMAGIC 0410
-/* Code indicating demand-paged executable.  */
-#define ZMAGIC 0413
-/* This indicates a demand-paged executable with the header in the text. 
-   The first page is unmapped to help trap NULL pointer references */
-#define QMAGIC 0314
-
-/* Code indicating core file.  */
-#define CMAGIC 0421
-
 #if !defined (N_BADMAG)
-#define N_BADMAG(x)	  (N_MAGIC(x) != OMAGIC		\
-			&& N_MAGIC(x) != NMAGIC		\
-  			&& N_MAGIC(x) != ZMAGIC \
-		        && N_MAGIC(x) != QMAGIC)
 #endif
-
-#define _N_HDROFF(x) (1024 - sizeof (struct exec))
-
 #if !defined (N_TXTOFF)
-#define N_TXTOFF(x) \
- (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
-  (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
 #endif
-
 #if !defined (N_DATOFF)
-#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
 #endif
-
 #if !defined (N_TRELOFF)
-#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
 #endif
-
 #if !defined (N_DRELOFF)
-#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
 #endif
-
 #if !defined (N_SYMOFF)
-#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
 #endif
-
 #if !defined (N_STROFF)
-#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
 #endif
-
-/* Address of text segment in memory after it is loaded.  */
 #if !defined (N_TXTADDR)
-#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
 #endif
-
-/* Address of data segment in memory after it is loaded.
-   Note that it is up to you to define SEGMENT_SIZE
-   on machines not listed here.  */
 #if defined(vax) || defined(hp300) || defined(pyr)
-#define SEGMENT_SIZE page_size
 #endif
 #ifdef	sony
-#define	SEGMENT_SIZE	0x2000
 #endif	/* Sony.  */
 #ifdef is68k
-#define SEGMENT_SIZE 0x20000
 #endif
 #if defined(m68k) && defined(PORTAR)
-#define PAGE_SIZE 0x400
-#define SEGMENT_SIZE PAGE_SIZE
 #endif
-
 #ifdef linux
-#ifdef __KERNEL__
 #include <asm/page.h>
-#else
-#include <unistd.h>
-#endif
 #if defined(__i386__) || defined(__mc68000__)
-#define SEGMENT_SIZE	1024
 #else
 #ifndef SEGMENT_SIZE
-#ifdef __KERNEL__
 #define SEGMENT_SIZE	PAGE_SIZE
-#else
-#define SEGMENT_SIZE   getpagesize()
 #endif
 #endif
 #endif
-#endif
-
-#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
-
-#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
-
 #ifndef N_DATADDR
-#define N_DATADDR(x) \
-    (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
-     : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
 #endif
-
-/* Address of bss segment in memory after it is loaded.  */
 #if !defined (N_BSSADDR)
-#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
 #endif
-
 #if !defined (N_NLIST_DECLARED)
-struct nlist {
-  union {
-    char *n_name;
-    struct nlist *n_next;
-    long n_strx;
-  } n_un;
-  unsigned char n_type;
-  char n_other;
-  short n_desc;
-  unsigned long n_value;
-};
 #endif /* no N_NLIST_DECLARED.  */
-
 #if !defined (N_UNDF)
-#define N_UNDF 0
 #endif
 #if !defined (N_ABS)
-#define N_ABS 2
 #endif
 #if !defined (N_TEXT)
-#define N_TEXT 4
 #endif
 #if !defined (N_DATA)
-#define N_DATA 6
 #endif
 #if !defined (N_BSS)
-#define N_BSS 8
 #endif
 #if !defined (N_FN)
-#define N_FN 15
 #endif
-
 #if !defined (N_EXT)
-#define N_EXT 1
 #endif
 #if !defined (N_TYPE)
-#define N_TYPE 036
 #endif
 #if !defined (N_STAB)
-#define N_STAB 0340
 #endif
-
-/* The following type indicates the definition of a symbol as being
-   an indirect reference to another symbol.  The other symbol
-   appears as an undefined reference, immediately following this symbol.
-
-   Indirection is asymmetrical.  The other symbol's value will be used
-   to satisfy requests for the indirect symbol, but not vice versa.
-   If the other symbol does not have a definition, libraries will
-   be searched to find a definition.  */
-#define N_INDR 0xa
-
-/* The following symbols refer to set elements.
-   All the N_SET[ATDB] symbols with the same name form one set.
-   Space is allocated for the set in the text section, and each set
-   element's value is stored into one word of the space.
-   The first word of the space is the length of the set (number of elements).
-
-   The address of the set is made into an N_SETV symbol
-   whose name is the same as the name of the set.
-   This symbol acts like a N_DATA global symbol
-   in that it can satisfy undefined external references.  */
-
-/* These appear as input to LD, in a .o file.  */
-#define	N_SETA	0x14		/* Absolute set element symbol */
-#define	N_SETT	0x16		/* Text set element symbol */
-#define	N_SETD	0x18		/* Data set element symbol */
-#define	N_SETB	0x1A		/* Bss set element symbol */
-
-/* This is output from LD.  */
-#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
-
 #if !defined (N_RELOCATION_INFO_DECLARED)
-/* This structure describes a single relocation to be performed.
-   The text-relocation section of the file is a vector of these structures,
-   all of which apply to the text section.
-   Likewise, the data-relocation section applies to the data section.  */
-
-struct relocation_info
-{
-  /* Address (within segment) to be relocated.  */
-  int r_address;
-  /* The meaning of r_symbolnum depends on r_extern.  */
-  unsigned int r_symbolnum:24;
-  /* Nonzero means value is a pc-relative offset
-     and it should be relocated for changes in its own address
-     as well as for changes in the symbol or section specified.  */
-  unsigned int r_pcrel:1;
-  /* Length (as exponent of 2) of the field to be relocated.
-     Thus, a value of 2 indicates 1<<2 bytes.  */
-  unsigned int r_length:2;
-  /* 1 => relocate with value of symbol.
-          r_symbolnum is the index of the symbol
-	  in file's the symbol table.
-     0 => relocate with the address of a segment.
-          r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
-	  (the N_EXT bit may be set also, but signifies nothing).  */
-  unsigned int r_extern:1;
-  /* Four bits that aren't used, but when writing an object file
-     it is desirable to clear them.  */
 #ifdef NS32K
-  unsigned r_bsr:1;
-  unsigned r_disp:1;
-  unsigned r_pad:2;
 #else
-  unsigned int r_pad:4;
 #endif
-};
 #endif /* no N_RELOCATION_INFO_DECLARED.  */
-
 #endif /*__ASSEMBLY__ */
 #endif /* __A_OUT_GNU_H__ */
diff --git a/include/linux/acct.h b/include/linux/acct.h
index d537aa0..4a5b7cb 100644
--- a/include/linux/acct.h
+++ b/include/linux/acct.h
@@ -11,109 +11,11 @@
  *  Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
  *
  */
-
 #ifndef _LINUX_ACCT_H
 #define _LINUX_ACCT_H
 
-#include <linux/types.h>
+#include <uapi/linux/acct.h>
 
-#include <asm/param.h>
-#include <asm/byteorder.h>
-
-/* 
- *  comp_t is a 16-bit "floating" point number with a 3-bit base 8
- *  exponent and a 13-bit fraction.
- *  comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
- *  (leading 1 not stored).
- *  See linux/kernel/acct.c for the specific encoding systems used.
- */
-
-typedef __u16	comp_t;
-typedef __u32	comp2_t;
-
-/*
- *   accounting file record
- *
- *   This structure contains all of the information written out to the
- *   process accounting file whenever a process exits.
- */
-
-#define ACCT_COMM	16
-
-struct acct
-{
-	char		ac_flag;		/* Flags */
-	char		ac_version;		/* Always set to ACCT_VERSION */
-	/* for binary compatibility back until 2.0 */
-	__u16		ac_uid16;		/* LSB of Real User ID */
-	__u16		ac_gid16;		/* LSB of Real Group ID */
-	__u16		ac_tty;			/* Control Terminal */
-	__u32		ac_btime;		/* Process Creation Time */
-	comp_t		ac_utime;		/* User Time */
-	comp_t		ac_stime;		/* System Time */
-	comp_t		ac_etime;		/* Elapsed Time */
-	comp_t		ac_mem;			/* Average Memory Usage */
-	comp_t		ac_io;			/* Chars Transferred */
-	comp_t		ac_rw;			/* Blocks Read or Written */
-	comp_t		ac_minflt;		/* Minor Pagefaults */
-	comp_t		ac_majflt;		/* Major Pagefaults */
-	comp_t		ac_swaps;		/* Number of Swaps */
-/* m68k had no padding here. */
-#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
-	__u16		ac_ahz;			/* AHZ */
-#endif
-	__u32		ac_exitcode;		/* Exitcode */
-	char		ac_comm[ACCT_COMM + 1];	/* Command Name */
-	__u8		ac_etime_hi;		/* Elapsed Time MSB */
-	__u16		ac_etime_lo;		/* Elapsed Time LSB */
-	__u32		ac_uid;			/* Real User ID */
-	__u32		ac_gid;			/* Real Group ID */
-};
-
-struct acct_v3
-{
-	char		ac_flag;		/* Flags */
-	char		ac_version;		/* Always set to ACCT_VERSION */
-	__u16		ac_tty;			/* Control Terminal */
-	__u32		ac_exitcode;		/* Exitcode */
-	__u32		ac_uid;			/* Real User ID */
-	__u32		ac_gid;			/* Real Group ID */
-	__u32		ac_pid;			/* Process ID */
-	__u32		ac_ppid;		/* Parent Process ID */
-	__u32		ac_btime;		/* Process Creation Time */
-#ifdef __KERNEL__
-	__u32		ac_etime;		/* Elapsed Time */
-#else
-	float		ac_etime;		/* Elapsed Time */
-#endif
-	comp_t		ac_utime;		/* User Time */
-	comp_t		ac_stime;		/* System Time */
-	comp_t		ac_mem;			/* Average Memory Usage */
-	comp_t		ac_io;			/* Chars Transferred */
-	comp_t		ac_rw;			/* Blocks Read or Written */
-	comp_t		ac_minflt;		/* Minor Pagefaults */
-	comp_t		ac_majflt;		/* Major Pagefaults */
-	comp_t		ac_swaps;		/* Number of Swaps */
-	char		ac_comm[ACCT_COMM];	/* Command Name */
-};
-
-/*
- *  accounting flags
- */
-				/* bit set when the process ... */
-#define AFORK		0x01	/* ... executed fork, but did not exec */
-#define ASU		0x02	/* ... used super-user privileges */
-#define ACOMPAT		0x04	/* ... used compatibility mode (VAX only not used) */
-#define ACORE		0x08	/* ... dumped core */
-#define AXSIG		0x10	/* ... was killed by a signal */
-
-#ifdef __BIG_ENDIAN
-#define ACCT_BYTEORDER	0x80	/* accounting file is big endian */
-#else
-#define ACCT_BYTEORDER	0x00	/* accounting file is little endian */
-#endif
-
-#ifdef __KERNEL__
 
 
 #ifdef CONFIG_BSD_PROCESS_ACCT
@@ -163,12 +65,6 @@
 typedef struct acct acct_t;
 #endif
 
-#else
-#define ACCT_VERSION	2
-#define AHZ		(HZ)
-#endif	/* __KERNEL */
-
-#ifdef __KERNEL__
 #include <linux/jiffies.h>
 /*
  * Yet another set of HZ to *HZ helper functions.
@@ -210,6 +106,4 @@
 	return x;
 }
 
-#endif  /* __KERNEL */
-
 #endif	/* _LINUX_ACCT_H */
diff --git a/include/linux/adb.h b/include/linux/adb.h
index 63bca50..cde4130 100644
--- a/include/linux/adb.h
+++ b/include/linux/adb.h
@@ -4,43 +4,8 @@
 #ifndef __ADB_H
 #define __ADB_H
 
-/* ADB commands */
-#define ADB_BUSRESET		0
-#define ADB_FLUSH(id)		(0x01 | ((id) << 4))
-#define ADB_WRITEREG(id, reg)	(0x08 | (reg) | ((id) << 4))
-#define ADB_READREG(id, reg)	(0x0C | (reg) | ((id) << 4))
+#include <uapi/linux/adb.h>
 
-/* ADB default device IDs (upper 4 bits of ADB command byte) */
-#define ADB_DONGLE	1	/* "software execution control" devices */
-#define ADB_KEYBOARD	2
-#define ADB_MOUSE	3
-#define ADB_TABLET	4
-#define ADB_MODEM	5
-#define ADB_MISC	7	/* maybe a monitor */
-
-#define ADB_RET_OK	0
-#define ADB_RET_TIMEOUT	3
-
-/* The kind of ADB request. The controller may emulate some
-   or all of those CUDA/PMU packet kinds */
-#define ADB_PACKET	0
-#define CUDA_PACKET	1
-#define ERROR_PACKET	2
-#define TIMER_PACKET	3
-#define POWER_PACKET	4
-#define MACIIC_PACKET	5
-#define PMU_PACKET	6
-#define ADB_QUERY	7
-
-/* ADB queries */
-
-/* ADB_QUERY_GETDEVINFO
- * Query ADB slot for device presence
- * data[2] = id, rep[0] = orig addr, rep[1] = handler_id
- */
-#define ADB_QUERY_GETDEVINFO	1
-
-#ifdef __KERNEL__
 
 struct adb_request {
 	unsigned char data[32];
@@ -98,6 +63,4 @@
 int adb_try_handler_change(int address, int new_id);
 int adb_get_infos(int address, int *original_address, int *handler_id);
 
-#endif /* __KERNEL__ */
-
 #endif /* __ADB_H */
diff --git a/include/linux/adfs_fs.h b/include/linux/adfs_fs.h
index b19801f..0d99107 100644
--- a/include/linux/adfs_fs.h
+++ b/include/linux/adfs_fs.h
@@ -1,47 +1,9 @@
 #ifndef _ADFS_FS_H
 #define _ADFS_FS_H
 
-#include <linux/types.h>
-#include <linux/magic.h>
+#include <uapi/linux/adfs_fs.h>
 
 /*
- * Disc Record at disc address 0xc00
- */
-struct adfs_discrecord {
-    __u8  log2secsize;
-    __u8  secspertrack;
-    __u8  heads;
-    __u8  density;
-    __u8  idlen;
-    __u8  log2bpmb;
-    __u8  skew;
-    __u8  bootoption;
-    __u8  lowsector;
-    __u8  nzones;
-    __le16 zone_spare;
-    __le32 root;
-    __le32 disc_size;
-    __le16 disc_id;
-    __u8  disc_name[10];
-    __le32 disc_type;
-    __le32 disc_size_high;
-    __u8  log2sharesize:4;
-    __u8  unused40:4;
-    __u8  big_flag:1;
-    __u8  unused41:1;
-    __u8  nzones_high;
-    __le32 format_version;
-    __le32 root_size;
-    __u8  unused52[60 - 52];
-};
-
-#define ADFS_DISCRECORD		(0xc00)
-#define ADFS_DR_OFFSET		(0x1c0)
-#define ADFS_DR_SIZE		 60
-#define ADFS_DR_SIZE_BITS	(ADFS_DR_SIZE << 3)
-
-#ifdef __KERNEL__
-/*
  * Calculate the boot block checksum on an ADFS drive.  Note that this will
  * appear to be correct if the sector contains all zeros, so also check that
  * the disk size is non-zero!!!
@@ -59,5 +21,3 @@
 	return (result & 0xff) != ptr[511];
 }
 #endif
-
-#endif
diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
index f6778ec..c6b61ca 100644
--- a/include/linux/agpgart.h
+++ b/include/linux/agpgart.h
@@ -23,94 +23,12 @@
  * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  *
  */
-
 #ifndef _AGP_H
 #define _AGP_H 1
 
-#define AGPIOC_BASE       'A'
-#define AGPIOC_INFO       _IOR (AGPIOC_BASE, 0, struct agp_info*)
-#define AGPIOC_ACQUIRE    _IO  (AGPIOC_BASE, 1)
-#define AGPIOC_RELEASE    _IO  (AGPIOC_BASE, 2)
-#define AGPIOC_SETUP      _IOW (AGPIOC_BASE, 3, struct agp_setup*)
-#define AGPIOC_RESERVE    _IOW (AGPIOC_BASE, 4, struct agp_region*)
-#define AGPIOC_PROTECT    _IOW (AGPIOC_BASE, 5, struct agp_region*)
-#define AGPIOC_ALLOCATE   _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
-#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
-#define AGPIOC_BIND       _IOW (AGPIOC_BASE, 8, struct agp_bind*)
-#define AGPIOC_UNBIND     _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
-#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10)
-
-#define AGP_DEVICE      "/dev/agpgart"
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef __KERNEL__
-#include <linux/types.h>
-
-struct agp_version {
-	__u16 major;
-	__u16 minor;
-};
-
-typedef struct _agp_info {
-	struct agp_version version;	/* version of the driver        */
-	__u32 bridge_id;	/* bridge vendor/device         */
-	__u32 agp_mode;		/* mode info of bridge          */
-	unsigned long aper_base;/* base of aperture             */
-	size_t aper_size;	/* size of aperture             */
-	size_t pg_total;	/* max pages (swap + system)    */
-	size_t pg_system;	/* max pages (system)           */
-	size_t pg_used;		/* current pages used           */
-} agp_info;
-
-typedef struct _agp_setup {
-	__u32 agp_mode;		/* mode info of bridge          */
-} agp_setup;
-
-/*
- * The "prot" down below needs still a "sleep" flag somehow ...
- */
-typedef struct _agp_segment {
-	__kernel_off_t pg_start;	/* starting page to populate    */
-	__kernel_size_t pg_count;	/* number of pages              */
-	int prot;			/* prot flags for mmap          */
-} agp_segment;
-
-typedef struct _agp_region {
-	__kernel_pid_t pid;		/* pid of process       */
-	__kernel_size_t seg_count;	/* number of segments   */
-	struct _agp_segment *seg_list;
-} agp_region;
-
-typedef struct _agp_allocate {
-	int key;		/* tag of allocation            */
-	__kernel_size_t pg_count;/* number of pages             */
-	__u32 type;		/* 0 == normal, other devspec   */
-   	__u32 physical;         /* device specific (some devices  
-				 * need a phys address of the     
-				 * actual page behind the gatt    
-				 * table)                        */
-} agp_allocate;
-
-typedef struct _agp_bind {
-	int key;		/* tag of allocation            */
-	__kernel_off_t pg_start;/* starting page to populate    */
-} agp_bind;
-
-typedef struct _agp_unbind {
-	int key;		/* tag of allocation            */
-	__u32 priority;		/* priority for paging out      */
-} agp_unbind;
-
-#else				/* __KERNEL__ */
 #include <linux/mutex.h>
 #include <linux/agp_backend.h>
+#include <uapi/linux/agpgart.h>
 
 #define AGPGART_MINOR 175
 
@@ -209,6 +127,4 @@
 	bool backend_acquired;
 };
 
-#endif				/* __KERNEL__ */
-
 #endif				/* _AGP_H */
diff --git a/include/linux/alarmtimer.h b/include/linux/alarmtimer.h
index 96c5c24..9069694 100644
--- a/include/linux/alarmtimer.h
+++ b/include/linux/alarmtimer.h
@@ -21,7 +21,6 @@
 
 #define ALARMTIMER_STATE_INACTIVE	0x00
 #define ALARMTIMER_STATE_ENQUEUED	0x01
-#define ALARMTIMER_STATE_CALLBACK	0x02
 
 /**
  * struct alarm - Alarm timer structure
@@ -35,6 +34,7 @@
  */
 struct alarm {
 	struct timerqueue_node	node;
+	struct hrtimer		timer;
 	enum alarmtimer_restart	(*function)(struct alarm *, ktime_t now);
 	enum alarmtimer_type	type;
 	int			state;
@@ -43,39 +43,12 @@
 
 void alarm_init(struct alarm *alarm, enum alarmtimer_type type,
 		enum alarmtimer_restart (*function)(struct alarm *, ktime_t));
-void alarm_start(struct alarm *alarm, ktime_t start);
+int alarm_start(struct alarm *alarm, ktime_t start);
 int alarm_try_to_cancel(struct alarm *alarm);
 int alarm_cancel(struct alarm *alarm);
 
 u64 alarm_forward(struct alarm *alarm, ktime_t now, ktime_t interval);
 
-/*
- * A alarmtimer is active, when it is enqueued into timerqueue or the
- * callback function is running.
- */
-static inline int alarmtimer_active(const struct alarm *timer)
-{
-	return timer->state != ALARMTIMER_STATE_INACTIVE;
-}
-
-/*
- * Helper function to check, whether the timer is on one of the queues
- */
-static inline int alarmtimer_is_queued(struct alarm *timer)
-{
-	return timer->state & ALARMTIMER_STATE_ENQUEUED;
-}
-
-/*
- * Helper function to check, whether the timer is running the callback
- * function
- */
-static inline int alarmtimer_callback_running(struct alarm *timer)
-{
-	return timer->state & ALARMTIMER_STATE_CALLBACK;
-}
-
-
 /* Provide way to access the rtc device being used by alarmtimers */
 struct rtc_device *alarmtimer_get_rtcdev(void);
 
diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h
index 01a6244..9c3a871 100644
--- a/include/linux/apm_bios.h
+++ b/include/linux/apm_bios.h
@@ -1,6 +1,3 @@
-#ifndef _LINUX_APM_H
-#define _LINUX_APM_H
-
 /*
  * Include file for the interface to an APM BIOS
  * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
@@ -15,25 +12,11 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  */
+#ifndef _LINUX_APM_H
+#define _LINUX_APM_H
 
-#include <linux/types.h>
+#include <uapi/linux/apm_bios.h>
 
-typedef unsigned short	apm_event_t;
-typedef unsigned short	apm_eventinfo_t;
-
-struct apm_bios_info {
-	__u16	version;
-	__u16	cseg;
-	__u32	offset;
-	__u16	cseg_16;
-	__u16	dseg;
-	__u16	flags;
-	__u16	cseg_len;
-	__u16	cseg_16_len;
-	__u16	dseg_len;
-};
-
-#ifdef __KERNEL__
 
 #define APM_CS		(GDT_ENTRY_APMBIOS_BASE * 8)
 #define APM_CS_16	(APM_CS + 8)
@@ -110,111 +93,9 @@
  */
 extern struct apm_info	apm_info;
 
-#endif	/* __KERNEL__ */
-
-/*
- * Power states
- */
-#define APM_STATE_READY		0x0000
-#define APM_STATE_STANDBY	0x0001
-#define APM_STATE_SUSPEND	0x0002
-#define APM_STATE_OFF		0x0003
-#define APM_STATE_BUSY		0x0004
-#define APM_STATE_REJECT	0x0005
-#define APM_STATE_OEM_SYS	0x0020
-#define APM_STATE_OEM_DEV	0x0040
-
-#define APM_STATE_DISABLE	0x0000
-#define APM_STATE_ENABLE	0x0001
-
-#define APM_STATE_DISENGAGE	0x0000
-#define APM_STATE_ENGAGE	0x0001
-
-/*
- * Events (results of Get PM Event)
- */
-#define APM_SYS_STANDBY		0x0001
-#define APM_SYS_SUSPEND		0x0002
-#define APM_NORMAL_RESUME	0x0003
-#define APM_CRITICAL_RESUME	0x0004
-#define APM_LOW_BATTERY		0x0005
-#define APM_POWER_STATUS_CHANGE	0x0006
-#define APM_UPDATE_TIME		0x0007
-#define APM_CRITICAL_SUSPEND	0x0008
-#define APM_USER_STANDBY	0x0009
-#define APM_USER_SUSPEND	0x000a
-#define APM_STANDBY_RESUME	0x000b
-#define APM_CAPABILITY_CHANGE	0x000c
-
-/*
- * Error codes
- */
-#define APM_SUCCESS		0x00
-#define APM_DISABLED		0x01
-#define APM_CONNECTED		0x02
-#define APM_NOT_CONNECTED	0x03
-#define APM_16_CONNECTED	0x05
-#define APM_16_UNSUPPORTED	0x06
-#define APM_32_CONNECTED	0x07
-#define APM_32_UNSUPPORTED	0x08
-#define APM_BAD_DEVICE		0x09
-#define APM_BAD_PARAM		0x0a
-#define APM_NOT_ENGAGED		0x0b
-#define APM_BAD_FUNCTION	0x0c
-#define APM_RESUME_DISABLED	0x0d
-#define APM_NO_ERROR		0x53
-#define APM_BAD_STATE		0x60
-#define APM_NO_EVENTS		0x80
-#define APM_NOT_PRESENT		0x86
-
-/*
- * APM Device IDs
- */
-#define APM_DEVICE_BIOS		0x0000
-#define APM_DEVICE_ALL		0x0001
-#define APM_DEVICE_DISPLAY	0x0100
-#define APM_DEVICE_STORAGE	0x0200
-#define APM_DEVICE_PARALLEL	0x0300
-#define APM_DEVICE_SERIAL	0x0400
-#define APM_DEVICE_NETWORK	0x0500
-#define APM_DEVICE_PCMCIA	0x0600
-#define APM_DEVICE_BATTERY	0x8000
-#define APM_DEVICE_OEM		0xe000
-#define APM_DEVICE_OLD_ALL	0xffff
-#define APM_DEVICE_CLASS	0x00ff
-#define APM_DEVICE_MASK		0xff00
-
-#ifdef __KERNEL__
 /*
  * This is the "All Devices" ID communicated to the BIOS
  */
 #define APM_DEVICE_BALL		((apm_info.connection_version > 0x0100) ? \
 				 APM_DEVICE_ALL : APM_DEVICE_OLD_ALL)
-#endif
-
-/*
- * Battery status
- */
-#define APM_MAX_BATTERIES	2
-
-/*
- * APM defined capability bit flags
- */
-#define APM_CAP_GLOBAL_STANDBY		0x0001
-#define APM_CAP_GLOBAL_SUSPEND		0x0002
-#define APM_CAP_RESUME_STANDBY_TIMER	0x0004 /* Timer resume from standby */
-#define APM_CAP_RESUME_SUSPEND_TIMER	0x0008 /* Timer resume from suspend */
-#define APM_CAP_RESUME_STANDBY_RING	0x0010 /* Resume on Ring fr standby */
-#define APM_CAP_RESUME_SUSPEND_RING	0x0020 /* Resume on Ring fr suspend */
-#define APM_CAP_RESUME_STANDBY_PCMCIA	0x0040 /* Resume on PCMCIA Ring	*/
-#define APM_CAP_RESUME_SUSPEND_PCMCIA	0x0080 /* Resume on PCMCIA Ring	*/
-
-/*
- * ioctl operations
- */
-#include <linux/ioctl.h>
-
-#define APM_IOC_STANDBY		_IO('A', 1)
-#define APM_IOC_SUSPEND		_IO('A', 2)
-
 #endif	/* LINUX_APM_H */
diff --git a/include/linux/atalk.h b/include/linux/atalk.h
index f57c368..73fd8b7 100644
--- a/include/linux/atalk.h
+++ b/include/linux/atalk.h
@@ -1,49 +1,9 @@
 #ifndef __LINUX_ATALK_H__
 #define __LINUX_ATALK_H__
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/socket.h>
-
-/*
- * AppleTalk networking structures
- *
- * The following are directly referenced from the University Of Michigan
- * netatalk for compatibility reasons.
- */
-#define ATPORT_FIRST	1
-#define ATPORT_RESERVED	128
-#define ATPORT_LAST	254		/* 254 is only legal on localtalk */ 
-#define ATADDR_ANYNET	(__u16)0
-#define ATADDR_ANYNODE	(__u8)0
-#define ATADDR_ANYPORT  (__u8)0
-#define ATADDR_BCAST	(__u8)255
-#define DDP_MAXSZ	587
-#define DDP_MAXHOPS     15		/* 4 bits of hop counter */
-
-#define SIOCATALKDIFADDR       (SIOCPROTOPRIVATE + 0)
-
-struct atalk_addr {
-	__be16	s_net;
-	__u8	s_node;
-};
-
-struct sockaddr_at {
-	__kernel_sa_family_t sat_family;
-	__u8		  sat_port;
-	struct atalk_addr sat_addr;
-	char		  sat_zero[8];
-};
-
-struct atalk_netrange {
-	__u8	nr_phase;
-	__be16	nr_firstnet;
-	__be16	nr_lastnet;
-};
-
-#ifdef __KERNEL__
 
 #include <net/sock.h>
+#include <uapi/linux/atalk.h>
 
 struct atalk_route {
 	struct net_device  *dev;
@@ -205,5 +165,4 @@
 #define atalk_proc_exit()	do { } while(0)
 #endif /* CONFIG_PROC_FS */
 
-#endif /* __KERNEL__ */
 #endif /* __LINUX_ATALK_H__ */
diff --git a/include/linux/atm.h b/include/linux/atm.h
index d3b2921..30006c4 100644
--- a/include/linux/atm.h
+++ b/include/linux/atm.h
@@ -1,242 +1,9 @@
 /* atm.h - general ATM declarations */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
-/*
- * WARNING: User-space programs should not #include <linux/atm.h> directly.
- *          Instead, #include <atm.h>
- */
-
 #ifndef _LINUX_ATM_H
 #define _LINUX_ATM_H
 
-/*
- * BEGIN_xx and END_xx markers are used for automatic generation of
- * documentation. Do not change them.
- */
+#include <uapi/linux/atm.h>
 
-#include <linux/compiler.h>
-#include <linux/atmapi.h>
-#include <linux/atmsap.h>
-#include <linux/atmioc.h>
-#include <linux/types.h>
-
-
-/* general ATM constants */
-#define ATM_CELL_SIZE		    53	/* ATM cell size incl. header */
-#define ATM_CELL_PAYLOAD	    48	/* ATM payload size */
-#define ATM_AAL0_SDU		    52	/* AAL0 SDU size */
-#define ATM_MAX_AAL34_PDU	 65535	/* maximum AAL3/4 PDU payload */
-#define ATM_AAL5_TRAILER	     8	/* AAL5 trailer size */
-#define ATM_MAX_AAL5_PDU	 65535	/* maximum AAL5 PDU payload */
-#define ATM_MAX_CDV		  9999	/* maximum (default) CDV */
-#define ATM_NOT_RSV_VCI		    32	/* first non-reserved VCI value */
-
-#define ATM_MAX_VPI		   255	/* maximum VPI at the UNI */
-#define ATM_MAX_VPI_NNI		  4096	/* maximum VPI at the NNI */
-#define ATM_MAX_VCI		 65535	/* maximum VCI */
-
-
-/* "protcol" values for the socket system call */
-#define ATM_NO_AAL	0		/* AAL not specified */
-#define ATM_AAL0	13		/* "raw" ATM cells */
-#define ATM_AAL1	1		/* AAL1 (CBR) */
-#define ATM_AAL2	2		/* AAL2 (VBR) */
-#define ATM_AAL34	3		/* AAL3/4 (data) */
-#define ATM_AAL5	5		/* AAL5 (data) */
-
-/*
- * socket option name coding functions
- *
- * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
- * << 22 only reserves 9 bits for the level.  On some architectures
- * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
- */
-
-#define __SO_ENCODE(l,n,t)	((((l) & 0x1FF) << 22) | ((n) << 16) | \
-				sizeof(t))
-#define __SO_LEVEL_MATCH(c,m)	(((c) >> 22) == ((m) & 0x1FF))
-#define __SO_NUMBER(c)		(((c) >> 16) & 0x3f)
-#define __SO_SIZE(c)		((c) & 0x3fff)
-
-/*
- * ATM layer
- */
-
-#define SO_SETCLP	__SO_ENCODE(SOL_ATM,0,int)
-			    /* set CLP bit value - TODO */
-#define SO_CIRANGE	__SO_ENCODE(SOL_ATM,1,struct atm_cirange)
-			    /* connection identifier range; socket must be
-			       bound or connected */
-#define SO_ATMQOS	__SO_ENCODE(SOL_ATM,2,struct atm_qos)
-			    /* Quality of Service setting */
-#define SO_ATMSAP	__SO_ENCODE(SOL_ATM,3,struct atm_sap)
-			    /* Service Access Point */
-#define SO_ATMPVC	__SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
-			    /* "PVC" address (also for SVCs); get only */
-#define SO_MULTIPOINT	__SO_ENCODE(SOL_ATM, 5, int)
-			    /* make this vc a p2mp */
-
-
-/*
- * Note @@@: since the socket layers don't really distinguish the control and
- * the data plane but generally seems to be data plane-centric, any layer is
- * about equally wrong for the SAP. If you have a better idea about this,
- * please speak up ...
- */
-
-
-/* ATM cell header (for AAL0) */
-
-/* BEGIN_CH */
-#define ATM_HDR_GFC_MASK	0xf0000000
-#define ATM_HDR_GFC_SHIFT	28
-#define ATM_HDR_VPI_MASK	0x0ff00000
-#define ATM_HDR_VPI_SHIFT	20
-#define ATM_HDR_VCI_MASK	0x000ffff0
-#define ATM_HDR_VCI_SHIFT	4
-#define ATM_HDR_PTI_MASK	0x0000000e
-#define ATM_HDR_PTI_SHIFT	1
-#define ATM_HDR_CLP		0x00000001
-/* END_CH */
-
-
-/* PTI codings */
-
-/* BEGIN_PTI */
-#define ATM_PTI_US0	0  /* user data cell, congestion not exp, SDU-type 0 */
-#define ATM_PTI_US1	1  /* user data cell, congestion not exp, SDU-type 1 */
-#define ATM_PTI_UCES0	2  /* user data cell, cong. experienced, SDU-type 0 */
-#define ATM_PTI_UCES1	3  /* user data cell, cong. experienced, SDU-type 1 */
-#define ATM_PTI_SEGF5	4  /* segment OAM F5 flow related cell */
-#define ATM_PTI_E2EF5	5  /* end-to-end OAM F5 flow related cell */
-#define ATM_PTI_RSV_RM	6  /* reserved for traffic control/resource mgmt */
-#define ATM_PTI_RSV	7  /* reserved */
-/* END_PTI */
-
-
-/*
- * The following items should stay in linux/atm.h, which should be linked to
- * netatm/atm.h
- */
-
-/* Traffic description */
-
-#define ATM_NONE	0		/* no traffic */
-#define ATM_UBR		1
-#define ATM_CBR		2
-#define ATM_VBR		3
-#define ATM_ABR		4
-#define ATM_ANYCLASS	5		/* compatible with everything */
-
-#define ATM_MAX_PCR	-1		/* maximum available PCR */
-
-struct atm_trafprm {
-	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
-	int		max_pcr;	/* maximum PCR in cells per second */
-	int		pcr;		/* desired PCR in cells per second */
-	int		min_pcr;	/* minimum PCR in cells per second */
-	int		max_cdv;	/* maximum CDV in microseconds */
-	int		max_sdu;	/* maximum SDU in bytes */
-        /* extra params for ABR */
-        unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
-        unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 
-        unsigned int 	frtt : 24;	/* Fixed Round Trip Time (24-bit) */
-        unsigned int 	rif  : 4;       /* Rate Increment Factor (4-bit) */
-        unsigned int 	rdf  : 4;       /* Rate Decrease Factor (4-bit) */
-        unsigned int nrm_pres  :1;      /* nrm present bit */
-        unsigned int trm_pres  :1;     	/* rm present bit */
-        unsigned int adtf_pres :1;     	/* adtf present bit */
-        unsigned int cdf_pres  :1;    	/* cdf present bit*/
-        unsigned int nrm       :3;     	/* Max # of Cells for each forward RM cell (3-bit) */
-        unsigned int trm       :3;    	/* Time between forward RM cells (3-bit) */    
-	unsigned int adtf      :10;     /* ACR Decrease Time Factor (10-bit) */
-	unsigned int cdf       :3;      /* Cutoff Decrease Factor (3-bit) */
-        unsigned int spare     :9;      /* spare bits */ 
-};
-
-struct atm_qos {
-	struct atm_trafprm txtp;	/* parameters in TX direction */
-	struct atm_trafprm rxtp __ATM_API_ALIGN;
-					/* parameters in RX direction */
-	unsigned char aal __ATM_API_ALIGN;
-};
-
-/* PVC addressing */
-
-#define ATM_ITF_ANY	-1		/* "magic" PVC address values */
-#define ATM_VPI_ANY	-1
-#define ATM_VCI_ANY	-1
-#define ATM_VPI_UNSPEC	-2
-#define ATM_VCI_UNSPEC	-2
-
-
-struct sockaddr_atmpvc {
-	unsigned short 	sap_family;	/* address family, AF_ATMPVC  */
-	struct {			/* PVC address */
-		short	itf;		/* ATM interface */
-		short	vpi;		/* VPI (only 8 bits at UNI) */
-		int	vci;		/* VCI (only 16 bits at UNI) */
-	} sap_addr __ATM_API_ALIGN;	/* PVC address */
-};
-
-/* SVC addressing */
-
-#define	ATM_ESA_LEN	20		/* ATM End System Address length */
-#define ATM_E164_LEN	12		/* maximum E.164 number length */
-
-#define ATM_AFI_DCC	0x39		/* DCC ATM Format */
-#define ATM_AFI_ICD	0x47		/* ICD ATM Format */
-#define ATM_AFI_E164	0x45		/* E.164 ATM Format */
-#define ATM_AFI_LOCAL	0x49		/* Local ATM Format */ 
-
-#define ATM_AFI_DCC_GROUP	0xBD	/* DCC ATM Group Format */
-#define ATM_AFI_ICD_GROUP	0xC5	/* ICD ATM Group Format */
-#define ATM_AFI_E164_GROUP	0xC3	/* E.164 ATM Group Format */
-#define ATM_AFI_LOCAL_GROUP	0xC7	/* Local ATM Group Format */
-
-#define ATM_LIJ_NONE	0		/* no leaf-initiated join */
-#define ATM_LIJ		1		/* request joining */
-#define ATM_LIJ_RPJ	2		/* set to root-prompted join */
-#define ATM_LIJ_NJ	3		/* set to network join */
-
-
-struct sockaddr_atmsvc {
-    unsigned short 	sas_family;	/* address family, AF_ATMSVC */
-    struct {				/* SVC address */
-        unsigned char	prv[ATM_ESA_LEN];/* private ATM address */
-        char		pub[ATM_E164_LEN+1]; /* public address (E.164) */
-    					/* unused addresses must be bzero'ed */
-	char		lij_type;	/* role in LIJ call; one of ATM_LIJ* */
-	__u32	lij_id;		/* LIJ call identifier */
-    } sas_addr __ATM_API_ALIGN;		/* SVC address */
-};
-
-
-static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
-{
-	return *addr.sas_addr.prv || *addr.sas_addr.pub;
-}
-
-
-static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
-{
-	return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
-}
-
-
-/*
- * Some stuff for linux/sockios.h
- */
-
-struct atmif_sioc {
-	int number;
-	int length;
-	void __user *arg;
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
 struct compat_atmif_sioc {
@@ -246,6 +13,3 @@
 };
 #endif
 #endif
-
-typedef unsigned short atm_backend_t;
-#endif
diff --git a/include/linux/atm_tcp.h b/include/linux/atm_tcp.h
index 375638f..db6b65f 100644
--- a/include/linux/atm_tcp.h
+++ b/include/linux/atm_tcp.h
@@ -3,62 +3,12 @@
 
 /* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
 
-
 #ifndef LINUX_ATM_TCP_H
 #define LINUX_ATM_TCP_H
 
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-#include <linux/types.h>
+#include <uapi/linux/atm_tcp.h>
 
 
-/*
- * All values in struct atmtcp_hdr are in network byte order
- */
-
-struct atmtcp_hdr {
-	__u16	vpi;
-	__u16	vci;
-	__u32	length;		/* ... of data part */
-};
-
-/*
- * All values in struct atmtcp_command are in host byte order
- */
-
-#define ATMTCP_HDR_MAGIC	(~0)	/* this length indicates a command */
-#define ATMTCP_CTRL_OPEN	1	/* request/reply */
-#define ATMTCP_CTRL_CLOSE	2	/* request/reply */
-
-struct atmtcp_control {
-	struct atmtcp_hdr hdr;	/* must be first */
-	int type;		/* message type; both directions */
-	atm_kptr_t vcc;		/* both directions */
-	struct sockaddr_atmpvc addr; /* suggested value from kernel */
-	struct atm_qos	qos;	/* both directions */
-	int result;		/* to kernel only */
-} __ATM_API_ALIGN;
-
-/*
- * Field usage:
- * Messge type	dir.	hdr.v?i	type	addr	qos	vcc	result
- * -----------  ----	------- ----	----	---	---	------
- * OPEN		K->D	Y	Y	Y	Y	Y	0
- * OPEN		D->K	-	Y	Y	Y	Y	Y
- * CLOSE	K->D	-	-	Y	-	Y	0
- * CLOSE	D->K	-	-	-	-	Y	Y
- */
-
-#define SIOCSIFATMTCP	_IO('a',ATMIOC_ITF)	/* set ATMTCP mode */
-#define ATMTCP_CREATE	_IO('a',ATMIOC_ITF+14)	/* create persistent ATMTCP
-						   interface */
-#define ATMTCP_REMOVE	_IO('a',ATMIOC_ITF+15)	/* destroy persistent ATMTCP
-						   interface */
-
-
-#ifdef __KERNEL__
-
 struct atm_tcp_ops {
 	int (*attach)(struct atm_vcc *vcc,int itf);
 	int (*create_persistent)(int itf);
@@ -69,5 +19,3 @@
 extern struct atm_tcp_ops atm_tcp_ops;
 
 #endif
-
-#endif
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
index 06fd4bb..22ef21c 100644
--- a/include/linux/atmdev.h
+++ b/include/linux/atmdev.h
@@ -1,218 +1,8 @@
 /* atmdev.h - ATM device driver declarations and various related items */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
 #ifndef LINUX_ATMDEV_H
 #define LINUX_ATMDEV_H
 
 
-#include <linux/atmapi.h>
-#include <linux/atm.h>
-#include <linux/atmioc.h>
-
-
-#define ESI_LEN		6
-
-#define ATM_OC3_PCR	(155520000/270*260/8/53)
-			/* OC3 link rate:  155520000 bps
-			   SONET overhead: /270*260 (9 section, 1 path)
-			   bits per cell:  /8/53
-			   max cell rate:  353207.547 cells/sec */
-#define ATM_25_PCR	((25600000/8-8000)/54)
-			/* 25 Mbps ATM cell rate (59111) */
-#define ATM_OC12_PCR	(622080000/1080*1040/8/53)
-			/* OC12 link rate: 622080000 bps
-			   SONET overhead: /1080*1040
-			   bits per cell:  /8/53
-			   max cell rate:  1412830.188 cells/sec */
-#define ATM_DS3_PCR	(8000*12)
-			/* DS3: 12 cells in a 125 usec time slot */
-
-
-#define __AAL_STAT_ITEMS \
-    __HANDLE_ITEM(tx);			/* TX okay */ \
-    __HANDLE_ITEM(tx_err);		/* TX errors */ \
-    __HANDLE_ITEM(rx);			/* RX okay */ \
-    __HANDLE_ITEM(rx_err);		/* RX errors */ \
-    __HANDLE_ITEM(rx_drop);		/* RX out of memory */
-
-struct atm_aal_stats {
-#define __HANDLE_ITEM(i) int i
-	__AAL_STAT_ITEMS
-#undef __HANDLE_ITEM
-};
-
-
-struct atm_dev_stats {
-	struct atm_aal_stats aal0;
-	struct atm_aal_stats aal34;
-	struct atm_aal_stats aal5;
-} __ATM_API_ALIGN;
-
-
-#define ATM_GETLINKRATE	_IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
-					/* get link rate */
-#define ATM_GETNAMES	_IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
-					/* get interface names (numbers) */
-#define ATM_GETTYPE	_IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
-					/* get interface type name */
-#define ATM_GETESI	_IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
-					/* get interface ESI */
-#define ATM_GETADDR	_IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
-					/* get itf's local ATM addr. list */
-#define ATM_RSTADDR	_IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
-					/* reset itf's ATM address list */
-#define ATM_ADDADDR	_IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
-					/* add a local ATM address */
-#define ATM_DELADDR	_IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
-					/* remove a local ATM address */
-#define ATM_GETCIRANGE	_IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
-					/* get connection identifier range */
-#define ATM_SETCIRANGE	_IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
-					/* set connection identifier range */
-#define ATM_SETESI	_IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
-					/* set interface ESI */
-#define ATM_SETESIF	_IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
-					/* force interface ESI */
-#define ATM_ADDLECSADDR	_IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
-					/* register a LECS address */
-#define ATM_DELLECSADDR	_IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
-					/* unregister a LECS address */
-#define ATM_GETLECSADDR	_IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
-					/* retrieve LECS address(es) */
-
-#define ATM_GETSTAT	_IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
-					/* get AAL layer statistics */
-#define ATM_GETSTATZ	_IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
-					/* get AAL layer statistics and zero */
-#define ATM_GETLOOP	_IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
-					/* get loopback mode */
-#define ATM_SETLOOP	_IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
-					/* set loopback mode */
-#define ATM_QUERYLOOP	_IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
-					/* query supported loopback modes */
-#define ATM_SETSC	_IOW('a',ATMIOC_SPECIAL+1,int)
-					/* enable or disable single-copy */
-#define ATM_SETBACKEND	_IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
-					/* set backend handler */
-#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
-					/* use backend to make new if */
-#define ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
- 					/* add party to p2mp call */
-#ifdef CONFIG_COMPAT
-/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
-#define COMPAT_ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
-#endif
-#define ATM_DROPPARTY 	_IOW('a', ATMIOC_SPECIAL+5,int)
-					/* drop party from p2mp call */
-
-/*
- * These are backend handkers that can be set via the ATM_SETBACKEND call
- * above.  In the future we may support dynamic loading of these - for now,
- * they're just being used to share the ATMIOC_BACKEND ioctls
- */
-#define ATM_BACKEND_RAW		0	
-#define ATM_BACKEND_PPP		1	/* PPPoATM - RFC2364 */
-#define ATM_BACKEND_BR2684	2	/* Bridged RFC1483/2684 */
-
-/* for ATM_GETTYPE */
-#define ATM_ITFTYP_LEN	8	/* maximum length of interface type name */
-
-/*
- * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
- */
-
-/* Point of loopback				CPU-->SAR-->PHY-->line--> ... */
-#define __ATM_LM_NONE	0	/* no loop back     ^     ^     ^      ^      */
-#define __ATM_LM_AAL	1	/* loop back PDUs --'     |     |      |      */
-#define __ATM_LM_ATM	2	/* loop back ATM cells ---'     |      |      */
-/* RESERVED		4	loop back on PHY side  ---'		      */
-#define __ATM_LM_PHY	8	/* loop back bits (digital) ----'      |      */
-#define __ATM_LM_ANALOG 16	/* loop back the analog signal --------'      */
-
-/* Direction of loopback */
-#define __ATM_LM_MKLOC(n)	((n))	    /* Local (i.e. loop TX to RX) */
-#define __ATM_LM_MKRMT(n)	((n) << 8)  /* Remote (i.e. loop RX to TX) */
-
-#define __ATM_LM_XTLOC(n)	((n) & 0xff)
-#define __ATM_LM_XTRMT(n)	(((n) >> 8) & 0xff)
-
-#define ATM_LM_NONE	0	/* no loopback */
-
-#define ATM_LM_LOC_AAL	__ATM_LM_MKLOC(__ATM_LM_AAL)
-#define ATM_LM_LOC_ATM	__ATM_LM_MKLOC(__ATM_LM_ATM)
-#define ATM_LM_LOC_PHY	__ATM_LM_MKLOC(__ATM_LM_PHY)
-#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
-
-#define ATM_LM_RMT_AAL	__ATM_LM_MKRMT(__ATM_LM_AAL)
-#define ATM_LM_RMT_ATM	__ATM_LM_MKRMT(__ATM_LM_ATM)
-#define ATM_LM_RMT_PHY	__ATM_LM_MKRMT(__ATM_LM_PHY)
-#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
-
-/*
- * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
- * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
- */
-
-
-struct atm_iobuf {
-	int length;
-	void __user *buffer;
-};
-
-/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
-
-#define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
- 
-struct atm_cirange {
-	signed char	vpi_bits;	/* 1..8, ATM_CI_MAX (-1) for maximum */
-	signed char	vci_bits;	/* 1..16, ATM_CI_MAX (-1) for maximum */
-};
-
-/* for ATM_SETSC; actually taken from the ATM_VF number space */
-
-#define ATM_SC_RX	1024		/* enable RX single-copy */
-#define ATM_SC_TX	2048		/* enable TX single-copy */
-
-#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
-				  anyway */
-
-/* MF: change_qos (Modify) flags */
-
-#define ATM_MF_IMMED	 1	/* Block until change is effective */
-#define ATM_MF_INC_RSV	 2	/* Change reservation on increase */
-#define ATM_MF_INC_SHP	 4	/* Change shaping on increase */
-#define ATM_MF_DEC_RSV	 8	/* Change reservation on decrease */
-#define ATM_MF_DEC_SHP	16	/* Change shaping on decrease */
-#define ATM_MF_BWD	32	/* Set the backward direction parameters */
-
-#define ATM_MF_SET	(ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
-			  ATM_MF_DEC_SHP | ATM_MF_BWD)
-
-/*
- * ATM_VS_* are used to express VC state in a human-friendly way.
- */
-
-#define ATM_VS_IDLE	0	/* VC is not used */
-#define ATM_VS_CONNECTED 1	/* VC is connected */
-#define ATM_VS_CLOSING	2	/* VC is closing */
-#define ATM_VS_LISTEN	3	/* VC is listening for incoming setups */
-#define ATM_VS_INUSE	4	/* VC is in use (registered with atmsigd) */
-#define ATM_VS_BOUND	5	/* VC is bound */
-
-#define ATM_VS2TXT_MAP \
-    "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
-
-#define ATM_VF2TXT_MAP \
-    "ADDR",	"READY",	"PARTIAL",	"REGIS", \
-    "RELEASED", "HASQOS",	"LISTEN",	"META", \
-    "256",	"512",		"1024",		"2048", \
-    "SESSION",	"HASSAP",	"BOUND",	"CLOSE"
-
-
-#ifdef __KERNEL__
-
 #include <linux/wait.h> /* wait_queue_head_t */
 #include <linux/time.h> /* struct timeval */
 #include <linux/net.h>
@@ -221,6 +11,7 @@
 #include <linux/uio.h>
 #include <net/sock.h>
 #include <linux/atomic.h>
+#include <uapi/linux/atmdev.h>
 
 #ifdef CONFIG_PROC_FS
 #include <linux/proc_fs.h>
@@ -521,6 +312,4 @@
 int register_atmdevice_notifier(struct notifier_block *nb);
 void unregister_atmdevice_notifier(struct notifier_block *nb);
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 2c83e5f..bce729a 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -20,388 +20,11 @@
  * Written by Rickard E. (Rik) Faith <faith@redhat.com>
  *
  */
-
 #ifndef _LINUX_AUDIT_H_
 #define _LINUX_AUDIT_H_
 
-#include <linux/types.h>
-#include <linux/elf-em.h>
-#include <linux/ptrace.h>
-
-/* The netlink messages for the audit system is divided into blocks:
- * 1000 - 1099 are for commanding the audit system
- * 1100 - 1199 user space trusted application messages
- * 1200 - 1299 messages internal to the audit daemon
- * 1300 - 1399 audit event messages
- * 1400 - 1499 SE Linux use
- * 1500 - 1599 kernel LSPP events
- * 1600 - 1699 kernel crypto events
- * 1700 - 1799 kernel anomaly records
- * 1800 - 1899 kernel integrity events
- * 1900 - 1999 future kernel use
- * 2000 is for otherwise unclassified kernel audit messages (legacy)
- * 2001 - 2099 unused (kernel)
- * 2100 - 2199 user space anomaly records
- * 2200 - 2299 user space actions taken in response to anomalies
- * 2300 - 2399 user space generated LSPP events
- * 2400 - 2499 user space crypto events
- * 2500 - 2999 future user space (maybe integrity labels and related events)
- *
- * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
- * exclusively user space. 1300-2099 is kernel --> user space 
- * communication.
- */
-#define AUDIT_GET		1000	/* Get status */
-#define AUDIT_SET		1001	/* Set status (enable/disable/auditd) */
-#define AUDIT_LIST		1002	/* List syscall rules -- deprecated */
-#define AUDIT_ADD		1003	/* Add syscall rule -- deprecated */
-#define AUDIT_DEL		1004	/* Delete syscall rule -- deprecated */
-#define AUDIT_USER		1005	/* Message from userspace -- deprecated */
-#define AUDIT_LOGIN		1006	/* Define the login id and information */
-#define AUDIT_WATCH_INS		1007	/* Insert file/dir watch entry */
-#define AUDIT_WATCH_REM		1008	/* Remove file/dir watch entry */
-#define AUDIT_WATCH_LIST	1009	/* List all file/dir watches */
-#define AUDIT_SIGNAL_INFO	1010	/* Get info about sender of signal to auditd */
-#define AUDIT_ADD_RULE		1011	/* Add syscall filtering rule */
-#define AUDIT_DEL_RULE		1012	/* Delete syscall filtering rule */
-#define AUDIT_LIST_RULES	1013	/* List syscall filtering rules */
-#define AUDIT_TRIM		1014	/* Trim junk from watched tree */
-#define AUDIT_MAKE_EQUIV	1015	/* Append to watched tree */
-#define AUDIT_TTY_GET		1016	/* Get TTY auditing status */
-#define AUDIT_TTY_SET		1017	/* Set TTY auditing status */
-
-#define AUDIT_FIRST_USER_MSG	1100	/* Userspace messages mostly uninteresting to kernel */
-#define AUDIT_USER_AVC		1107	/* We filter this differently */
-#define AUDIT_USER_TTY		1124	/* Non-ICANON TTY input meaning */
-#define AUDIT_LAST_USER_MSG	1199
-#define AUDIT_FIRST_USER_MSG2	2100	/* More user space messages */
-#define AUDIT_LAST_USER_MSG2	2999
- 
-#define AUDIT_DAEMON_START      1200    /* Daemon startup record */
-#define AUDIT_DAEMON_END        1201    /* Daemon normal stop record */
-#define AUDIT_DAEMON_ABORT      1202    /* Daemon error stop record */
-#define AUDIT_DAEMON_CONFIG     1203    /* Daemon config change */
-
-#define AUDIT_SYSCALL		1300	/* Syscall event */
-/* #define AUDIT_FS_WATCH	1301	 * Deprecated */
-#define AUDIT_PATH		1302	/* Filename path information */
-#define AUDIT_IPC		1303	/* IPC record */
-#define AUDIT_SOCKETCALL	1304	/* sys_socketcall arguments */
-#define AUDIT_CONFIG_CHANGE	1305	/* Audit system configuration change */
-#define AUDIT_SOCKADDR		1306	/* sockaddr copied as syscall arg */
-#define AUDIT_CWD		1307	/* Current working directory */
-#define AUDIT_EXECVE		1309	/* execve arguments */
-#define AUDIT_IPC_SET_PERM	1311	/* IPC new permissions record type */
-#define AUDIT_MQ_OPEN		1312	/* POSIX MQ open record type */
-#define AUDIT_MQ_SENDRECV	1313	/* POSIX MQ send/receive record type */
-#define AUDIT_MQ_NOTIFY		1314	/* POSIX MQ notify record type */
-#define AUDIT_MQ_GETSETATTR	1315	/* POSIX MQ get/set attribute record type */
-#define AUDIT_KERNEL_OTHER	1316	/* For use by 3rd party modules */
-#define AUDIT_FD_PAIR		1317    /* audit record for pipe/socketpair */
-#define AUDIT_OBJ_PID		1318	/* ptrace target */
-#define AUDIT_TTY		1319	/* Input on an administrative TTY */
-#define AUDIT_EOE		1320	/* End of multi-record event */
-#define AUDIT_BPRM_FCAPS	1321	/* Information about fcaps increasing perms */
-#define AUDIT_CAPSET		1322	/* Record showing argument to sys_capset */
-#define AUDIT_MMAP		1323	/* Record showing descriptor and flags in mmap */
-#define AUDIT_NETFILTER_PKT	1324	/* Packets traversing netfilter chains */
-#define AUDIT_NETFILTER_CFG	1325	/* Netfilter chain modifications */
-
-#define AUDIT_AVC		1400	/* SE Linux avc denial or grant */
-#define AUDIT_SELINUX_ERR	1401	/* Internal SE Linux Errors */
-#define AUDIT_AVC_PATH		1402	/* dentry, vfsmount pair from avc */
-#define AUDIT_MAC_POLICY_LOAD	1403	/* Policy file load */
-#define AUDIT_MAC_STATUS	1404	/* Changed enforcing,permissive,off */
-#define AUDIT_MAC_CONFIG_CHANGE	1405	/* Changes to booleans */
-#define AUDIT_MAC_UNLBL_ALLOW	1406	/* NetLabel: allow unlabeled traffic */
-#define AUDIT_MAC_CIPSOV4_ADD	1407	/* NetLabel: add CIPSOv4 DOI entry */
-#define AUDIT_MAC_CIPSOV4_DEL	1408	/* NetLabel: del CIPSOv4 DOI entry */
-#define AUDIT_MAC_MAP_ADD	1409	/* NetLabel: add LSM domain mapping */
-#define AUDIT_MAC_MAP_DEL	1410	/* NetLabel: del LSM domain mapping */
-#define AUDIT_MAC_IPSEC_ADDSA	1411	/* Not used */
-#define AUDIT_MAC_IPSEC_DELSA	1412	/* Not used  */
-#define AUDIT_MAC_IPSEC_ADDSPD	1413	/* Not used */
-#define AUDIT_MAC_IPSEC_DELSPD	1414	/* Not used */
-#define AUDIT_MAC_IPSEC_EVENT	1415	/* Audit an IPSec event */
-#define AUDIT_MAC_UNLBL_STCADD	1416	/* NetLabel: add a static label */
-#define AUDIT_MAC_UNLBL_STCDEL	1417	/* NetLabel: del a static label */
-
-#define AUDIT_FIRST_KERN_ANOM_MSG   1700
-#define AUDIT_LAST_KERN_ANOM_MSG    1799
-#define AUDIT_ANOM_PROMISCUOUS      1700 /* Device changed promiscuous mode */
-#define AUDIT_ANOM_ABEND            1701 /* Process ended abnormally */
-#define AUDIT_ANOM_LINK		    1702 /* Suspicious use of file links */
-#define AUDIT_INTEGRITY_DATA	    1800 /* Data integrity verification */
-#define AUDIT_INTEGRITY_METADATA    1801 /* Metadata integrity verification */
-#define AUDIT_INTEGRITY_STATUS	    1802 /* Integrity enable status */
-#define AUDIT_INTEGRITY_HASH	    1803 /* Integrity HASH type */
-#define AUDIT_INTEGRITY_PCR	    1804 /* PCR invalidation msgs */
-#define AUDIT_INTEGRITY_RULE	    1805 /* policy rule */
-
-#define AUDIT_KERNEL		2000	/* Asynchronous audit record. NOT A REQUEST. */
-
-/* Rule flags */
-#define AUDIT_FILTER_USER	0x00	/* Apply rule to user-generated messages */
-#define AUDIT_FILTER_TASK	0x01	/* Apply rule at task creation (not syscall) */
-#define AUDIT_FILTER_ENTRY	0x02	/* Apply rule at syscall entry */
-#define AUDIT_FILTER_WATCH	0x03	/* Apply rule to file system watches */
-#define AUDIT_FILTER_EXIT	0x04	/* Apply rule at syscall exit */
-#define AUDIT_FILTER_TYPE	0x05	/* Apply rule at audit_log_start */
-
-#define AUDIT_NR_FILTERS	6
-
-#define AUDIT_FILTER_PREPEND	0x10	/* Prepend to front of list */
-
-/* Rule actions */
-#define AUDIT_NEVER    0	/* Do not build context if rule matches */
-#define AUDIT_POSSIBLE 1	/* Build context if rule matches  */
-#define AUDIT_ALWAYS   2	/* Generate audit record if rule matches */
-
-/* Rule structure sizes -- if these change, different AUDIT_ADD and
- * AUDIT_LIST commands must be implemented. */
-#define AUDIT_MAX_FIELDS   64
-#define AUDIT_MAX_KEY_LEN  256
-#define AUDIT_BITMASK_SIZE 64
-#define AUDIT_WORD(nr) ((__u32)((nr)/32))
-#define AUDIT_BIT(nr)  (1 << ((nr) - AUDIT_WORD(nr)*32))
-
-#define AUDIT_SYSCALL_CLASSES 16
-#define AUDIT_CLASS_DIR_WRITE 0
-#define AUDIT_CLASS_DIR_WRITE_32 1
-#define AUDIT_CLASS_CHATTR 2
-#define AUDIT_CLASS_CHATTR_32 3
-#define AUDIT_CLASS_READ 4
-#define AUDIT_CLASS_READ_32 5
-#define AUDIT_CLASS_WRITE 6
-#define AUDIT_CLASS_WRITE_32 7
-#define AUDIT_CLASS_SIGNAL 8
-#define AUDIT_CLASS_SIGNAL_32 9
-
-/* This bitmask is used to validate user input.  It represents all bits that
- * are currently used in an audit field constant understood by the kernel.
- * If you are adding a new #define AUDIT_<whatever>, please ensure that
- * AUDIT_UNUSED_BITS is updated if need be. */
-#define AUDIT_UNUSED_BITS	0x07FFFC00
-
-/* AUDIT_FIELD_COMPARE rule list */
-#define AUDIT_COMPARE_UID_TO_OBJ_UID	1
-#define AUDIT_COMPARE_GID_TO_OBJ_GID	2
-#define AUDIT_COMPARE_EUID_TO_OBJ_UID	3
-#define AUDIT_COMPARE_EGID_TO_OBJ_GID	4
-#define AUDIT_COMPARE_AUID_TO_OBJ_UID	5
-#define AUDIT_COMPARE_SUID_TO_OBJ_UID	6
-#define AUDIT_COMPARE_SGID_TO_OBJ_GID	7
-#define AUDIT_COMPARE_FSUID_TO_OBJ_UID	8
-#define AUDIT_COMPARE_FSGID_TO_OBJ_GID	9
-
-#define AUDIT_COMPARE_UID_TO_AUID	10
-#define AUDIT_COMPARE_UID_TO_EUID	11
-#define AUDIT_COMPARE_UID_TO_FSUID	12
-#define AUDIT_COMPARE_UID_TO_SUID	13
-
-#define AUDIT_COMPARE_AUID_TO_FSUID	14
-#define AUDIT_COMPARE_AUID_TO_SUID	15
-#define AUDIT_COMPARE_AUID_TO_EUID	16
-
-#define AUDIT_COMPARE_EUID_TO_SUID	17
-#define AUDIT_COMPARE_EUID_TO_FSUID	18
-
-#define AUDIT_COMPARE_SUID_TO_FSUID	19
-
-#define AUDIT_COMPARE_GID_TO_EGID	20
-#define AUDIT_COMPARE_GID_TO_FSGID	21
-#define AUDIT_COMPARE_GID_TO_SGID	22
-
-#define AUDIT_COMPARE_EGID_TO_FSGID	23
-#define AUDIT_COMPARE_EGID_TO_SGID	24
-#define AUDIT_COMPARE_SGID_TO_FSGID	25
-
-#define AUDIT_MAX_FIELD_COMPARE		AUDIT_COMPARE_SGID_TO_FSGID
-
-/* Rule fields */
-				/* These are useful when checking the
-				 * task structure at task creation time
-				 * (AUDIT_PER_TASK).  */
-#define AUDIT_PID	0
-#define AUDIT_UID	1
-#define AUDIT_EUID	2
-#define AUDIT_SUID	3
-#define AUDIT_FSUID	4
-#define AUDIT_GID	5
-#define AUDIT_EGID	6
-#define AUDIT_SGID	7
-#define AUDIT_FSGID	8
-#define AUDIT_LOGINUID	9
-#define AUDIT_PERS	10
-#define AUDIT_ARCH	11
-#define AUDIT_MSGTYPE	12
-#define AUDIT_SUBJ_USER	13	/* security label user */
-#define AUDIT_SUBJ_ROLE	14	/* security label role */
-#define AUDIT_SUBJ_TYPE	15	/* security label type */
-#define AUDIT_SUBJ_SEN	16	/* security label sensitivity label */
-#define AUDIT_SUBJ_CLR	17	/* security label clearance label */
-#define AUDIT_PPID	18
-#define AUDIT_OBJ_USER	19
-#define AUDIT_OBJ_ROLE	20
-#define AUDIT_OBJ_TYPE	21
-#define AUDIT_OBJ_LEV_LOW	22
-#define AUDIT_OBJ_LEV_HIGH	23
-
-				/* These are ONLY useful when checking
-				 * at syscall exit time (AUDIT_AT_EXIT). */
-#define AUDIT_DEVMAJOR	100
-#define AUDIT_DEVMINOR	101
-#define AUDIT_INODE	102
-#define AUDIT_EXIT	103
-#define AUDIT_SUCCESS   104	/* exit >= 0; value ignored */
-#define AUDIT_WATCH	105
-#define AUDIT_PERM	106
-#define AUDIT_DIR	107
-#define AUDIT_FILETYPE	108
-#define AUDIT_OBJ_UID	109
-#define AUDIT_OBJ_GID	110
-#define AUDIT_FIELD_COMPARE	111
-
-#define AUDIT_ARG0      200
-#define AUDIT_ARG1      (AUDIT_ARG0+1)
-#define AUDIT_ARG2      (AUDIT_ARG0+2)
-#define AUDIT_ARG3      (AUDIT_ARG0+3)
-
-#define AUDIT_FILTERKEY	210
-
-#define AUDIT_NEGATE			0x80000000
-
-/* These are the supported operators.
- *	4  2  1  8
- *	=  >  <  ?
- *	----------
- *	0  0  0	 0	00	nonsense
- *	0  0  0	 1	08	&  bit mask
- *	0  0  1	 0	10	<
- *	0  1  0	 0	20	>
- *	0  1  1	 0	30	!=
- *	1  0  0	 0	40	=
- *	1  0  0	 1	48	&=  bit test
- *	1  0  1	 0	50	<=
- *	1  1  0	 0	60	>=
- *	1  1  1	 1	78	all operators
- */
-#define AUDIT_BIT_MASK			0x08000000
-#define AUDIT_LESS_THAN			0x10000000
-#define AUDIT_GREATER_THAN		0x20000000
-#define AUDIT_NOT_EQUAL			0x30000000
-#define AUDIT_EQUAL			0x40000000
-#define AUDIT_BIT_TEST			(AUDIT_BIT_MASK|AUDIT_EQUAL)
-#define AUDIT_LESS_THAN_OR_EQUAL	(AUDIT_LESS_THAN|AUDIT_EQUAL)
-#define AUDIT_GREATER_THAN_OR_EQUAL	(AUDIT_GREATER_THAN|AUDIT_EQUAL)
-#define AUDIT_OPERATORS			(AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK)
-
-enum {
-	Audit_equal,
-	Audit_not_equal,
-	Audit_bitmask,
-	Audit_bittest,
-	Audit_lt,
-	Audit_gt,
-	Audit_le,
-	Audit_ge,
-	Audit_bad
-};
-
-/* Status symbols */
-				/* Mask values */
-#define AUDIT_STATUS_ENABLED		0x0001
-#define AUDIT_STATUS_FAILURE		0x0002
-#define AUDIT_STATUS_PID		0x0004
-#define AUDIT_STATUS_RATE_LIMIT		0x0008
-#define AUDIT_STATUS_BACKLOG_LIMIT	0x0010
-				/* Failure-to-log actions */
-#define AUDIT_FAIL_SILENT	0
-#define AUDIT_FAIL_PRINTK	1
-#define AUDIT_FAIL_PANIC	2
-
-/* distinguish syscall tables */
-#define __AUDIT_ARCH_64BIT 0x80000000
-#define __AUDIT_ARCH_LE	   0x40000000
-#define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_ARMEB	(EM_ARM)
-#define AUDIT_ARCH_CRIS		(EM_CRIS|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_FRV		(EM_FRV)
-#define AUDIT_ARCH_H8300	(EM_H8_300)
-#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_IA64		(EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_M32R		(EM_M32R)
-#define AUDIT_ARCH_M68K		(EM_68K)
-#define AUDIT_ARCH_MIPS		(EM_MIPS)
-#define AUDIT_ARCH_MIPSEL	(EM_MIPS|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_MIPS64	(EM_MIPS|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_MIPSEL64	(EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_PARISC	(EM_PARISC)
-#define AUDIT_ARCH_PARISC64	(EM_PARISC|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_PPC		(EM_PPC)
-#define AUDIT_ARCH_PPC64	(EM_PPC64|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_S390		(EM_S390)
-#define AUDIT_ARCH_S390X	(EM_S390|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_SH		(EM_SH)
-#define AUDIT_ARCH_SHEL		(EM_SH|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_SH64		(EM_SH|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_SHEL64	(EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define AUDIT_ARCH_SPARC	(EM_SPARC)
-#define AUDIT_ARCH_SPARC64	(EM_SPARCV9|__AUDIT_ARCH_64BIT)
-#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-
-#define AUDIT_PERM_EXEC		1
-#define AUDIT_PERM_WRITE	2
-#define AUDIT_PERM_READ		4
-#define AUDIT_PERM_ATTR		8
-
-struct audit_status {
-	__u32		mask;		/* Bit mask for valid entries */
-	__u32		enabled;	/* 1 = enabled, 0 = disabled */
-	__u32		failure;	/* Failure-to-log action */
-	__u32		pid;		/* pid of auditd process */
-	__u32		rate_limit;	/* messages rate limit (per second) */
-	__u32		backlog_limit;	/* waiting messages limit */
-	__u32		lost;		/* messages lost */
-	__u32		backlog;	/* messages waiting in queue */
-};
-
-struct audit_tty_status {
-	__u32		enabled; /* 1 = enabled, 0 = disabled */
-};
-
-/* audit_rule_data supports filter rules with both integer and string
- * fields.  It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and
- * AUDIT_LIST_RULES requests.
- */
-struct audit_rule_data {
-	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
-	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
-	__u32		field_count;
-	__u32		mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */
-	__u32		fields[AUDIT_MAX_FIELDS];
-	__u32		values[AUDIT_MAX_FIELDS];
-	__u32		fieldflags[AUDIT_MAX_FIELDS];
-	__u32		buflen;	/* total length of string fields */
-	char		buf[0];	/* string fields buffer */
-};
-
-/* audit_rule is supported to maintain backward compatibility with
- * userspace.  It supports integer fields only and corresponds to
- * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests.
- */
-struct audit_rule {		/* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
-	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
-	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
-	__u32		field_count;
-	__u32		mask[AUDIT_BITMASK_SIZE];
-	__u32		fields[AUDIT_MAX_FIELDS];
-	__u32		values[AUDIT_MAX_FIELDS];
-};
-
-#ifdef __KERNEL__
 #include <linux/sched.h>
+#include <uapi/linux/audit.h>
 
 struct audit_sig_info {
 	uid_t		uid;
@@ -452,6 +75,16 @@
 extern int __init audit_register_class(int class, unsigned *list);
 extern int audit_classify_syscall(int abi, unsigned syscall);
 extern int audit_classify_arch(int arch);
+
+/* audit_names->type values */
+#define	AUDIT_TYPE_UNKNOWN	0	/* we don't know yet */
+#define	AUDIT_TYPE_NORMAL	1	/* a "normal" audit record */
+#define	AUDIT_TYPE_PARENT	2	/* a parent audit record */
+#define	AUDIT_TYPE_CHILD_DELETE 3	/* a child being deleted */
+#define	AUDIT_TYPE_CHILD_CREATE 4	/* a child being created */
+
+struct filename;
+
 #ifdef CONFIG_AUDITSYSCALL
 /* These are defined in auditsc.c */
 				/* Public API */
@@ -461,11 +94,14 @@
 				  int major, unsigned long a0, unsigned long a1,
 				  unsigned long a2, unsigned long a3);
 extern void __audit_syscall_exit(int ret_success, long ret_value);
-extern void __audit_getname(const char *name);
-extern void audit_putname(const char *name);
-extern void __audit_inode(const char *name, const struct dentry *dentry);
-extern void __audit_inode_child(const struct dentry *dentry,
-				const struct inode *parent);
+extern struct filename *__audit_reusename(const __user char *uptr);
+extern void __audit_getname(struct filename *name);
+extern void audit_putname(struct filename *name);
+extern void __audit_inode(struct filename *name, const struct dentry *dentry,
+				unsigned int parent);
+extern void __audit_inode_child(const struct inode *parent,
+				const struct dentry *dentry,
+				const unsigned char type);
 extern void __audit_seccomp(unsigned long syscall, long signr, int code);
 extern void __audit_ptrace(struct task_struct *t);
 
@@ -495,19 +131,27 @@
 		__audit_syscall_exit(success, return_code);
 	}
 }
-static inline void audit_getname(const char *name)
+static inline struct filename *audit_reusename(const __user char *name)
+{
+	if (unlikely(!audit_dummy_context()))
+		return __audit_reusename(name);
+	return NULL;
+}
+static inline void audit_getname(struct filename *name)
 {
 	if (unlikely(!audit_dummy_context()))
 		__audit_getname(name);
 }
-static inline void audit_inode(const char *name, const struct dentry *dentry) {
+static inline void audit_inode(struct filename *name, const struct dentry *dentry,
+				unsigned int parent) {
 	if (unlikely(!audit_dummy_context()))
-		__audit_inode(name, dentry);
+		__audit_inode(name, dentry, parent);
 }
-static inline void audit_inode_child(const struct dentry *dentry,
-				     const struct inode *parent) {
+static inline void audit_inode_child(const struct inode *parent,
+				     const struct dentry *dentry,
+				     const unsigned char type) {
 	if (unlikely(!audit_dummy_context()))
-		__audit_inode_child(dentry, parent);
+		__audit_inode_child(parent, dentry, type);
 }
 void audit_core_dumps(long signr);
 
@@ -651,19 +295,29 @@
 {
 	return 1;
 }
-static inline void audit_getname(const char *name)
+static inline struct filename *audit_reusename(const __user char *name)
+{
+	return NULL;
+}
+static inline void audit_getname(struct filename *name)
 { }
-static inline void audit_putname(const char *name)
+static inline void audit_putname(struct filename *name)
 { }
-static inline void __audit_inode(const char *name, const struct dentry *dentry)
+static inline void __audit_inode(struct filename *name,
+					const struct dentry *dentry,
+					unsigned int parent)
 { }
-static inline void __audit_inode_child(const struct dentry *dentry,
-					const struct inode *parent)
+static inline void __audit_inode_child(const struct inode *parent,
+					const struct dentry *dentry,
+					const unsigned char type)
 { }
-static inline void audit_inode(const char *name, const struct dentry *dentry)
+static inline void audit_inode(struct filename *name,
+				const struct dentry *dentry,
+				unsigned int parent)
 { }
-static inline void audit_inode_child(const struct dentry *dentry,
-				     const struct inode *parent)
+static inline void audit_inode_child(const struct inode *parent,
+				     const struct dentry *dentry,
+				     const unsigned char type)
 { }
 static inline void audit_core_dumps(long signr)
 { }
@@ -828,4 +482,3 @@
 }
 
 #endif
-#endif
diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h
index da64e15..fcd704d 100644
--- a/include/linux/auto_fs.h
+++ b/include/linux/auto_fs.h
@@ -10,77 +10,11 @@
  *
  * ----------------------------------------------------------------------- */
 
-
 #ifndef _LINUX_AUTO_FS_H
 #define _LINUX_AUTO_FS_H
 
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/fs.h>
 #include <linux/limits.h>
 #include <linux/ioctl.h>
-#else
-#include <sys/ioctl.h>
-#endif /* __KERNEL__ */
-
-/* This file describes autofs v3 */
-#define AUTOFS_PROTO_VERSION	3
-
-/* Range of protocol versions defined */
-#define AUTOFS_MAX_PROTO_VERSION	AUTOFS_PROTO_VERSION
-#define AUTOFS_MIN_PROTO_VERSION	AUTOFS_PROTO_VERSION
-
-/*
- * Architectures where both 32- and 64-bit binaries can be executed
- * on 64-bit kernels need this.  This keeps the structure format
- * uniform, and makes sure the wait_queue_token isn't too big to be
- * passed back down to the kernel.
- *
- * This assumes that on these architectures:
- * mode     32 bit    64 bit
- * -------------------------
- * int      32 bit    32 bit
- * long     32 bit    64 bit
- *
- * If so, 32-bit user-space code should be backwards compatible.
- */
-
-#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
- || defined(__powerpc__) || defined(__s390__)
-typedef unsigned int autofs_wqt_t;
-#else
-typedef unsigned long autofs_wqt_t;
-#endif
-
-/* Packet types */
-#define autofs_ptype_missing	0	/* Missing entry (mount request) */
-#define autofs_ptype_expire	1	/* Expire entry (umount request) */
-
-struct autofs_packet_hdr {
-	int proto_version;		/* Protocol version */
-	int type;			/* Type of packet */
-};
-
-struct autofs_packet_missing {
-	struct autofs_packet_hdr hdr;
-        autofs_wqt_t wait_queue_token;
-	int len;
-	char name[NAME_MAX+1];
-};	
-
-/* v3 expire (via ioctl) */
-struct autofs_packet_expire {
-	struct autofs_packet_hdr hdr;
-	int len;
-	char name[NAME_MAX+1];
-};
-
-#define AUTOFS_IOC_READY      _IO(0x93,0x60)
-#define AUTOFS_IOC_FAIL       _IO(0x93,0x61)
-#define AUTOFS_IOC_CATATONIC  _IO(0x93,0x62)
-#define AUTOFS_IOC_PROTOVER   _IOR(0x93,0x63,int)
-#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
-#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
-#define AUTOFS_IOC_EXPIRE     _IOR(0x93,0x65,struct autofs_packet_expire)
-
+#include <uapi/linux/auto_fs.h>
 #endif /* _LINUX_AUTO_FS_H */
diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h
index f3b5d4e..669fef5 100644
--- a/include/linux/auxvec.h
+++ b/include/linux/auxvec.h
@@ -1,39 +1,8 @@
 #ifndef _LINUX_AUXVEC_H
 #define _LINUX_AUXVEC_H
 
-#include <asm/auxvec.h>
+#include <uapi/linux/auxvec.h>
 
-/* Symbolic values for the entries in the auxiliary table
-   put on the initial stack */
-#define AT_NULL   0	/* end of vector */
-#define AT_IGNORE 1	/* entry should be ignored */
-#define AT_EXECFD 2	/* file descriptor of program */
-#define AT_PHDR   3	/* program headers for program */
-#define AT_PHENT  4	/* size of program header entry */
-#define AT_PHNUM  5	/* number of program headers */
-#define AT_PAGESZ 6	/* system page size */
-#define AT_BASE   7	/* base address of interpreter */
-#define AT_FLAGS  8	/* flags */
-#define AT_ENTRY  9	/* entry point of program */
-#define AT_NOTELF 10	/* program is not ELF */
-#define AT_UID    11	/* real uid */
-#define AT_EUID   12	/* effective uid */
-#define AT_GID    13	/* real gid */
-#define AT_EGID   14	/* effective gid */
-#define AT_PLATFORM 15  /* string identifying CPU for optimizations */
-#define AT_HWCAP  16    /* arch dependent hints at CPU capabilities */
-#define AT_CLKTCK 17	/* frequency at which times() increments */
-/* AT_* values 18 through 22 are reserved */
-#define AT_SECURE 23   /* secure mode boolean */
-#define AT_BASE_PLATFORM 24	/* string identifying real platform, may
-				 * differ from AT_PLATFORM. */
-#define AT_RANDOM 25	/* address of 16 random bytes */
-
-#define AT_EXECFN  31	/* filename of program */
-
-#ifdef __KERNEL__
 #define AT_VECTOR_SIZE_BASE 19 /* NEW_AUX_ENT entries in auxiliary table */
   /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */
-#endif
-
 #endif /* _LINUX_AUXVEC_H */
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index 26531f3..cfcc6bf 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -1,26 +1,10 @@
 #ifndef _LINUX_BINFMTS_H
 #define _LINUX_BINFMTS_H
 
-#include <linux/capability.h>
-
-struct pt_regs;
-
-/*
- * These are the maximum length and maximum number of strings passed to the
- * execve() system call.  MAX_ARG_STRLEN is essentially random but serves to
- * prevent the kernel from being unduly impacted by misaddressed pointers.
- * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer.
- */
-#define MAX_ARG_STRLEN (PAGE_SIZE * 32)
-#define MAX_ARG_STRINGS 0x7FFFFFFF
-
-/* sizeof(linux_binprm->buf) */
-#define BINPRM_BUF_SIZE 128
-
-#ifdef __KERNEL__
 #include <linux/sched.h>
 #include <linux/unistd.h>
 #include <asm/exec.h>
+#include <uapi/linux/binfmts.h>
 
 #define CORENAME_MAX_SIZE 128
 
@@ -141,5 +125,4 @@
 extern void ret_from_kernel_execve(struct pt_regs *normal) __noreturn;
 #endif
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_BINFMTS_H */
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 4d1a074..7c2e030 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -1,150 +1,11 @@
 #ifndef BLKTRACE_H
 #define BLKTRACE_H
 
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/blkdev.h>
 #include <linux/relay.h>
 #include <linux/compat.h>
-#endif
+#include <uapi/linux/blktrace_api.h>
 
-/*
- * Trace categories
- */
-enum blktrace_cat {
-	BLK_TC_READ	= 1 << 0,	/* reads */
-	BLK_TC_WRITE	= 1 << 1,	/* writes */
-	BLK_TC_FLUSH	= 1 << 2,	/* flush */
-	BLK_TC_SYNC	= 1 << 3,	/* sync IO */
-	BLK_TC_SYNCIO	= BLK_TC_SYNC,
-	BLK_TC_QUEUE	= 1 << 4,	/* queueing/merging */
-	BLK_TC_REQUEUE	= 1 << 5,	/* requeueing */
-	BLK_TC_ISSUE	= 1 << 6,	/* issue */
-	BLK_TC_COMPLETE	= 1 << 7,	/* completions */
-	BLK_TC_FS	= 1 << 8,	/* fs requests */
-	BLK_TC_PC	= 1 << 9,	/* pc requests */
-	BLK_TC_NOTIFY	= 1 << 10,	/* special message */
-	BLK_TC_AHEAD	= 1 << 11,	/* readahead */
-	BLK_TC_META	= 1 << 12,	/* metadata */
-	BLK_TC_DISCARD	= 1 << 13,	/* discard requests */
-	BLK_TC_DRV_DATA	= 1 << 14,	/* binary per-driver data */
-	BLK_TC_FUA	= 1 << 15,	/* fua requests */
-
-	BLK_TC_END	= 1 << 15,	/* we've run out of bits! */
-};
-
-#define BLK_TC_SHIFT		(16)
-#define BLK_TC_ACT(act)		((act) << BLK_TC_SHIFT)
-
-/*
- * Basic trace actions
- */
-enum blktrace_act {
-	__BLK_TA_QUEUE = 1,		/* queued */
-	__BLK_TA_BACKMERGE,		/* back merged to existing rq */
-	__BLK_TA_FRONTMERGE,		/* front merge to existing rq */
-	__BLK_TA_GETRQ,			/* allocated new request */
-	__BLK_TA_SLEEPRQ,		/* sleeping on rq allocation */
-	__BLK_TA_REQUEUE,		/* request requeued */
-	__BLK_TA_ISSUE,			/* sent to driver */
-	__BLK_TA_COMPLETE,		/* completed by driver */
-	__BLK_TA_PLUG,			/* queue was plugged */
-	__BLK_TA_UNPLUG_IO,		/* queue was unplugged by io */
-	__BLK_TA_UNPLUG_TIMER,		/* queue was unplugged by timer */
-	__BLK_TA_INSERT,		/* insert request */
-	__BLK_TA_SPLIT,			/* bio was split */
-	__BLK_TA_BOUNCE,		/* bio was bounced */
-	__BLK_TA_REMAP,			/* bio was remapped */
-	__BLK_TA_ABORT,			/* request aborted */
-	__BLK_TA_DRV_DATA,		/* driver-specific binary data */
-};
-
-/*
- * Notify events.
- */
-enum blktrace_notify {
-	__BLK_TN_PROCESS = 0,		/* establish pid/name mapping */
-	__BLK_TN_TIMESTAMP,		/* include system clock */
-	__BLK_TN_MESSAGE,		/* Character string message */
-};
-
-
-/*
- * Trace actions in full. Additionally, read or write is masked
- */
-#define BLK_TA_QUEUE		(__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_BACKMERGE	(__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_FRONTMERGE	(__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
-#define	BLK_TA_GETRQ		(__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
-#define	BLK_TA_SLEEPRQ		(__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
-#define	BLK_TA_REQUEUE		(__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
-#define BLK_TA_ISSUE		(__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
-#define BLK_TA_COMPLETE		(__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
-#define BLK_TA_PLUG		(__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_UNPLUG_IO	(__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_UNPLUG_TIMER	(__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_INSERT		(__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_SPLIT		(__BLK_TA_SPLIT)
-#define BLK_TA_BOUNCE		(__BLK_TA_BOUNCE)
-#define BLK_TA_REMAP		(__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_ABORT		(__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
-#define BLK_TA_DRV_DATA	(__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
-
-#define BLK_TN_PROCESS		(__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
-#define BLK_TN_TIMESTAMP	(__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
-#define BLK_TN_MESSAGE		(__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
-
-#define BLK_IO_TRACE_MAGIC	0x65617400
-#define BLK_IO_TRACE_VERSION	0x07
-
-/*
- * The trace itself
- */
-struct blk_io_trace {
-	__u32 magic;		/* MAGIC << 8 | version */
-	__u32 sequence;		/* event number */
-	__u64 time;		/* in microseconds */
-	__u64 sector;		/* disk offset */
-	__u32 bytes;		/* transfer length */
-	__u32 action;		/* what happened */
-	__u32 pid;		/* who did it */
-	__u32 device;		/* device number */
-	__u32 cpu;		/* on what cpu did it happen */
-	__u16 error;		/* completion error */
-	__u16 pdu_len;		/* length of data after this trace */
-};
-
-/*
- * The remap event
- */
-struct blk_io_trace_remap {
-	__be32 device_from;
-	__be32 device_to;
-	__be64 sector_from;
-};
-
-enum {
-	Blktrace_setup = 1,
-	Blktrace_running,
-	Blktrace_stopped,
-};
-
-#define BLKTRACE_BDEV_SIZE	32
-
-/*
- * User setup structure passed with BLKTRACESTART
- */
-struct blk_user_trace_setup {
-	char name[BLKTRACE_BDEV_SIZE];	/* output */
-	__u16 act_mask;			/* input */
-	__u32 buf_size;			/* input */
-	__u32 buf_nr;			/* input */
-	__u64 start_lba;
-	__u64 end_lba;
-	__u32 pid;
-};
-
-#ifdef __KERNEL__
 #if defined(CONFIG_BLK_DEV_IO_TRACE)
 
 #include <linux/sysfs.h>
@@ -250,5 +111,4 @@
 
 #endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/bsg.h b/include/linux/bsg.h
index ecb4730..7173f6e 100644
--- a/include/linux/bsg.h
+++ b/include/linux/bsg.h
@@ -1,67 +1,8 @@
 #ifndef BSG_H
 #define BSG_H
 
-#include <linux/types.h>
+#include <uapi/linux/bsg.h>
 
-#define BSG_PROTOCOL_SCSI		0
-
-#define BSG_SUB_PROTOCOL_SCSI_CMD	0
-#define BSG_SUB_PROTOCOL_SCSI_TMF	1
-#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT	2
-
-/*
- * For flags member below
- * sg.h sg_io_hdr also has bits defined for it's flags member. However
- * none of these bits are implemented/used by bsg. The bits below are
- * allocated to not conflict with sg.h ones anyway.
- */
-#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
-
-struct sg_io_v4 {
-	__s32 guard;		/* [i] 'Q' to differentiate from v3 */
-	__u32 protocol;		/* [i] 0 -> SCSI , .... */
-	__u32 subprotocol;	/* [i] 0 -> SCSI command, 1 -> SCSI task
-				   management function, .... */
-
-	__u32 request_len;	/* [i] in bytes */
-	__u64 request;		/* [i], [*i] {SCSI: cdb} */
-	__u64 request_tag;	/* [i] {SCSI: task tag (only if flagged)} */
-	__u32 request_attr;	/* [i] {SCSI: task attribute} */
-	__u32 request_priority;	/* [i] {SCSI: task priority} */
-	__u32 request_extra;	/* [i] {spare, for padding} */
-	__u32 max_response_len;	/* [i] in bytes */
-	__u64 response;		/* [i], [*o] {SCSI: (auto)sense data} */
-
-        /* "dout_": data out (to device); "din_": data in (from device) */
-	__u32 dout_iovec_count;	/* [i] 0 -> "flat" dout transfer else
-				   dout_xfer points to array of iovec */
-	__u32 dout_xfer_len;	/* [i] bytes to be transferred to device */
-	__u32 din_iovec_count;	/* [i] 0 -> "flat" din transfer */
-	__u32 din_xfer_len;	/* [i] bytes to be transferred from device */
-	__u64 dout_xferp;	/* [i], [*i] */
-	__u64 din_xferp;	/* [i], [*o] */
-
-	__u32 timeout;		/* [i] units: millisecond */
-	__u32 flags;		/* [i] bit mask */
-	__u64 usr_ptr;		/* [i->o] unused internally */
-	__u32 spare_in;		/* [i] */
-
-	__u32 driver_status;	/* [o] 0 -> ok */
-	__u32 transport_status;	/* [o] 0 -> ok */
-	__u32 device_status;	/* [o] {SCSI: command completion status} */
-	__u32 retry_delay;	/* [o] {SCSI: status auxiliary information} */
-	__u32 info;		/* [o] additional information */
-	__u32 duration;		/* [o] time to complete, in milliseconds */
-	__u32 response_len;	/* [o] bytes of response actually written */
-	__s32 din_resid;	/* [o] din_xfer_len - actual_din_xfer_len */
-	__s32 dout_resid;	/* [o] dout_xfer_len - actual_dout_xfer_len */
-	__u64 generated_tag;	/* [o] {SCSI: transport generated task tag} */
-	__u32 spare_out;	/* [o] */
-
-	__u32 padding;
-};
-
-#ifdef __KERNEL__
 
 #if defined(CONFIG_BLK_DEV_BSG)
 struct bsg_class_device {
@@ -89,6 +30,4 @@
 }
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/byteorder/Kbuild b/include/linux/byteorder/Kbuild
index 5896e34..e69de29 100644
--- a/include/linux/byteorder/Kbuild
+++ b/include/linux/byteorder/Kbuild
@@ -1,2 +0,0 @@
-header-y += big_endian.h
-header-y += little_endian.h
diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h
index 3c80fd7..3920414 100644
--- a/include/linux/byteorder/big_endian.h
+++ b/include/linux/byteorder/big_endian.h
@@ -1,108 +1,7 @@
 #ifndef _LINUX_BYTEORDER_BIG_ENDIAN_H
 #define _LINUX_BYTEORDER_BIG_ENDIAN_H
 
-#ifndef __BIG_ENDIAN
-#define __BIG_ENDIAN 4321
-#endif
-#ifndef __BIG_ENDIAN_BITFIELD
-#define __BIG_ENDIAN_BITFIELD
-#endif
+#include <uapi/linux/byteorder/big_endian.h>
 
-#include <linux/types.h>
-#include <linux/swab.h>
-
-#define __constant_htonl(x) ((__force __be32)(__u32)(x))
-#define __constant_ntohl(x) ((__force __u32)(__be32)(x))
-#define __constant_htons(x) ((__force __be16)(__u16)(x))
-#define __constant_ntohs(x) ((__force __u16)(__be16)(x))
-#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
-#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
-#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
-#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
-#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
-#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
-#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
-#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
-#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
-#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
-#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
-#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
-#define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
-#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
-#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
-#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
-#define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
-#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
-#define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
-#define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
-#define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
-#define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
-#define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
-#define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
-
-static inline __le64 __cpu_to_le64p(const __u64 *p)
-{
-	return (__force __le64)__swab64p(p);
-}
-static inline __u64 __le64_to_cpup(const __le64 *p)
-{
-	return __swab64p((__u64 *)p);
-}
-static inline __le32 __cpu_to_le32p(const __u32 *p)
-{
-	return (__force __le32)__swab32p(p);
-}
-static inline __u32 __le32_to_cpup(const __le32 *p)
-{
-	return __swab32p((__u32 *)p);
-}
-static inline __le16 __cpu_to_le16p(const __u16 *p)
-{
-	return (__force __le16)__swab16p(p);
-}
-static inline __u16 __le16_to_cpup(const __le16 *p)
-{
-	return __swab16p((__u16 *)p);
-}
-static inline __be64 __cpu_to_be64p(const __u64 *p)
-{
-	return (__force __be64)*p;
-}
-static inline __u64 __be64_to_cpup(const __be64 *p)
-{
-	return (__force __u64)*p;
-}
-static inline __be32 __cpu_to_be32p(const __u32 *p)
-{
-	return (__force __be32)*p;
-}
-static inline __u32 __be32_to_cpup(const __be32 *p)
-{
-	return (__force __u32)*p;
-}
-static inline __be16 __cpu_to_be16p(const __u16 *p)
-{
-	return (__force __be16)*p;
-}
-static inline __u16 __be16_to_cpup(const __be16 *p)
-{
-	return (__force __u16)*p;
-}
-#define __cpu_to_le64s(x) __swab64s((x))
-#define __le64_to_cpus(x) __swab64s((x))
-#define __cpu_to_le32s(x) __swab32s((x))
-#define __le32_to_cpus(x) __swab32s((x))
-#define __cpu_to_le16s(x) __swab16s((x))
-#define __le16_to_cpus(x) __swab16s((x))
-#define __cpu_to_be64s(x) do { (void)(x); } while (0)
-#define __be64_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_be32s(x) do { (void)(x); } while (0)
-#define __be32_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_be16s(x) do { (void)(x); } while (0)
-#define __be16_to_cpus(x) do { (void)(x); } while (0)
-
-#ifdef __KERNEL__
 #include <linux/byteorder/generic.h>
-#endif
-
 #endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */
diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h
index 83195fb..0805737 100644
--- a/include/linux/byteorder/little_endian.h
+++ b/include/linux/byteorder/little_endian.h
@@ -1,108 +1,7 @@
 #ifndef _LINUX_BYTEORDER_LITTLE_ENDIAN_H
 #define _LINUX_BYTEORDER_LITTLE_ENDIAN_H
 
-#ifndef __LITTLE_ENDIAN
-#define __LITTLE_ENDIAN 1234
-#endif
-#ifndef __LITTLE_ENDIAN_BITFIELD
-#define __LITTLE_ENDIAN_BITFIELD
-#endif
+#include <uapi/linux/byteorder/little_endian.h>
 
-#include <linux/types.h>
-#include <linux/swab.h>
-
-#define __constant_htonl(x) ((__force __be32)___constant_swab32((x)))
-#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x))
-#define __constant_htons(x) ((__force __be16)___constant_swab16((x)))
-#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x))
-#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x))
-#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x))
-#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
-#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
-#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x))
-#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x))
-#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x)))
-#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x))
-#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x)))
-#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x))
-#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x)))
-#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x))
-#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
-#define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
-#define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
-#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
-#define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
-#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
-#define __cpu_to_be64(x) ((__force __be64)__swab64((x)))
-#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
-#define __cpu_to_be32(x) ((__force __be32)__swab32((x)))
-#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
-#define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
-#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
-
-static inline __le64 __cpu_to_le64p(const __u64 *p)
-{
-	return (__force __le64)*p;
-}
-static inline __u64 __le64_to_cpup(const __le64 *p)
-{
-	return (__force __u64)*p;
-}
-static inline __le32 __cpu_to_le32p(const __u32 *p)
-{
-	return (__force __le32)*p;
-}
-static inline __u32 __le32_to_cpup(const __le32 *p)
-{
-	return (__force __u32)*p;
-}
-static inline __le16 __cpu_to_le16p(const __u16 *p)
-{
-	return (__force __le16)*p;
-}
-static inline __u16 __le16_to_cpup(const __le16 *p)
-{
-	return (__force __u16)*p;
-}
-static inline __be64 __cpu_to_be64p(const __u64 *p)
-{
-	return (__force __be64)__swab64p(p);
-}
-static inline __u64 __be64_to_cpup(const __be64 *p)
-{
-	return __swab64p((__u64 *)p);
-}
-static inline __be32 __cpu_to_be32p(const __u32 *p)
-{
-	return (__force __be32)__swab32p(p);
-}
-static inline __u32 __be32_to_cpup(const __be32 *p)
-{
-	return __swab32p((__u32 *)p);
-}
-static inline __be16 __cpu_to_be16p(const __u16 *p)
-{
-	return (__force __be16)__swab16p(p);
-}
-static inline __u16 __be16_to_cpup(const __be16 *p)
-{
-	return __swab16p((__u16 *)p);
-}
-#define __cpu_to_le64s(x) do { (void)(x); } while (0)
-#define __le64_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_le32s(x) do { (void)(x); } while (0)
-#define __le32_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_le16s(x) do { (void)(x); } while (0)
-#define __le16_to_cpus(x) do { (void)(x); } while (0)
-#define __cpu_to_be64s(x) __swab64s((x))
-#define __be64_to_cpus(x) __swab64s((x))
-#define __cpu_to_be32s(x) __swab32s((x))
-#define __be32_to_cpus(x) __swab32s((x))
-#define __cpu_to_be16s(x) __swab16s((x))
-#define __be16_to_cpus(x) __swab16s((x))
-
-#ifdef __KERNEL__
 #include <linux/byteorder/generic.h>
-#endif
-
 #endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */
diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild
index c62b7f1..e69de29 100644
--- a/include/linux/can/Kbuild
+++ b/include/linux/can/Kbuild
@@ -1,5 +0,0 @@
-header-y += raw.h
-header-y += bcm.h
-header-y += gw.h
-header-y += error.h
-header-y += netlink.h
diff --git a/include/linux/capability.h b/include/linux/capability.h
index d10b7ed..98503b7 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -9,82 +9,11 @@
  *
  * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
  */
-
 #ifndef _LINUX_CAPABILITY_H
 #define _LINUX_CAPABILITY_H
 
-#include <linux/types.h>
+#include <uapi/linux/capability.h>
 
-struct task_struct;
-
-/* User-level do most of the mapping between kernel and user
-   capabilities based on the version tag given by the kernel. The
-   kernel might be somewhat backwards compatible, but don't bet on
-   it. */
-
-/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to
-   a set of three capability sets.  The transposition of 3*the
-   following structure to such a composite is better handled in a user
-   library since the draft standard requires the use of malloc/free
-   etc.. */
-
-#define _LINUX_CAPABILITY_VERSION_1  0x19980330
-#define _LINUX_CAPABILITY_U32S_1     1
-
-#define _LINUX_CAPABILITY_VERSION_2  0x20071026  /* deprecated - use v3 */
-#define _LINUX_CAPABILITY_U32S_2     2
-
-#define _LINUX_CAPABILITY_VERSION_3  0x20080522
-#define _LINUX_CAPABILITY_U32S_3     2
-
-typedef struct __user_cap_header_struct {
-	__u32 version;
-	int pid;
-} __user *cap_user_header_t;
-
-typedef struct __user_cap_data_struct {
-        __u32 effective;
-        __u32 permitted;
-        __u32 inheritable;
-} __user *cap_user_data_t;
-
-
-#define VFS_CAP_REVISION_MASK	0xFF000000
-#define VFS_CAP_REVISION_SHIFT	24
-#define VFS_CAP_FLAGS_MASK	~VFS_CAP_REVISION_MASK
-#define VFS_CAP_FLAGS_EFFECTIVE	0x000001
-
-#define VFS_CAP_REVISION_1	0x01000000
-#define VFS_CAP_U32_1           1
-#define XATTR_CAPS_SZ_1         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1))
-
-#define VFS_CAP_REVISION_2	0x02000000
-#define VFS_CAP_U32_2           2
-#define XATTR_CAPS_SZ_2         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2))
-
-#define XATTR_CAPS_SZ           XATTR_CAPS_SZ_2
-#define VFS_CAP_U32             VFS_CAP_U32_2
-#define VFS_CAP_REVISION	VFS_CAP_REVISION_2
-
-struct vfs_cap_data {
-	__le32 magic_etc;            /* Little endian */
-	struct {
-		__le32 permitted;    /* Little endian */
-		__le32 inheritable;  /* Little endian */
-	} data[VFS_CAP_U32];
-};
-
-#ifndef __KERNEL__
-
-/*
- * Backwardly compatible definition for source code - trapped in a
- * 32-bit world. If you find you need this, please consider using
- * libcap to untrap yourself...
- */
-#define _LINUX_CAPABILITY_VERSION  _LINUX_CAPABILITY_VERSION_1
-#define _LINUX_CAPABILITY_U32S     _LINUX_CAPABILITY_U32S_1
-
-#else
 
 #define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
 #define _KERNEL_CAPABILITY_U32S    _LINUX_CAPABILITY_U32S_3
@@ -105,277 +34,6 @@
 #define _USER_CAP_HEADER_SIZE  (sizeof(struct __user_cap_header_struct))
 #define _KERNEL_CAP_T_SIZE     (sizeof(kernel_cap_t))
 
-#endif
-
-
-/**
- ** POSIX-draft defined capabilities.
- **/
-
-/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
-   overrides the restriction of changing file ownership and group
-   ownership. */
-
-#define CAP_CHOWN            0
-
-/* Override all DAC access, including ACL execute access if
-   [_POSIX_ACL] is defined. Excluding DAC access covered by
-   CAP_LINUX_IMMUTABLE. */
-
-#define CAP_DAC_OVERRIDE     1
-
-/* Overrides all DAC restrictions regarding read and search on files
-   and directories, including ACL restrictions if [_POSIX_ACL] is
-   defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
-
-#define CAP_DAC_READ_SEARCH  2
-
-/* Overrides all restrictions about allowed operations on files, where
-   file owner ID must be equal to the user ID, except where CAP_FSETID
-   is applicable. It doesn't override MAC and DAC restrictions. */
-
-#define CAP_FOWNER           3
-
-/* Overrides the following restrictions that the effective user ID
-   shall match the file owner ID when setting the S_ISUID and S_ISGID
-   bits on that file; that the effective group ID (or one of the
-   supplementary group IDs) shall match the file owner ID when setting
-   the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
-   cleared on successful return from chown(2) (not implemented). */
-
-#define CAP_FSETID           4
-
-/* Overrides the restriction that the real or effective user ID of a
-   process sending a signal must match the real or effective user ID
-   of the process receiving the signal. */
-
-#define CAP_KILL             5
-
-/* Allows setgid(2) manipulation */
-/* Allows setgroups(2) */
-/* Allows forged gids on socket credentials passing. */
-
-#define CAP_SETGID           6
-
-/* Allows set*uid(2) manipulation (including fsuid). */
-/* Allows forged pids on socket credentials passing. */
-
-#define CAP_SETUID           7
-
-
-/**
- ** Linux-specific capabilities
- **/
-
-/* Without VFS support for capabilities:
- *   Transfer any capability in your permitted set to any pid,
- *   remove any capability in your permitted set from any pid
- * With VFS support for capabilities (neither of above, but)
- *   Add any capability from current's capability bounding set
- *       to the current process' inheritable set
- *   Allow taking bits out of capability bounding set
- *   Allow modification of the securebits for a process
- */
-
-#define CAP_SETPCAP          8
-
-/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
-
-#define CAP_LINUX_IMMUTABLE  9
-
-/* Allows binding to TCP/UDP sockets below 1024 */
-/* Allows binding to ATM VCIs below 32 */
-
-#define CAP_NET_BIND_SERVICE 10
-
-/* Allow broadcasting, listen to multicast */
-
-#define CAP_NET_BROADCAST    11
-
-/* Allow interface configuration */
-/* Allow administration of IP firewall, masquerading and accounting */
-/* Allow setting debug option on sockets */
-/* Allow modification of routing tables */
-/* Allow setting arbitrary process / process group ownership on
-   sockets */
-/* Allow binding to any address for transparent proxying (also via NET_RAW) */
-/* Allow setting TOS (type of service) */
-/* Allow setting promiscuous mode */
-/* Allow clearing driver statistics */
-/* Allow multicasting */
-/* Allow read/write of device-specific registers */
-/* Allow activation of ATM control sockets */
-
-#define CAP_NET_ADMIN        12
-
-/* Allow use of RAW sockets */
-/* Allow use of PACKET sockets */
-/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */
-
-#define CAP_NET_RAW          13
-
-/* Allow locking of shared memory segments */
-/* Allow mlock and mlockall (which doesn't really have anything to do
-   with IPC) */
-
-#define CAP_IPC_LOCK         14
-
-/* Override IPC ownership checks */
-
-#define CAP_IPC_OWNER        15
-
-/* Insert and remove kernel modules - modify kernel without limit */
-#define CAP_SYS_MODULE       16
-
-/* Allow ioperm/iopl access */
-/* Allow sending USB messages to any device via /proc/bus/usb */
-
-#define CAP_SYS_RAWIO        17
-
-/* Allow use of chroot() */
-
-#define CAP_SYS_CHROOT       18
-
-/* Allow ptrace() of any process */
-
-#define CAP_SYS_PTRACE       19
-
-/* Allow configuration of process accounting */
-
-#define CAP_SYS_PACCT        20
-
-/* Allow configuration of the secure attention key */
-/* Allow administration of the random device */
-/* Allow examination and configuration of disk quotas */
-/* Allow setting the domainname */
-/* Allow setting the hostname */
-/* Allow calling bdflush() */
-/* Allow mount() and umount(), setting up new smb connection */
-/* Allow some autofs root ioctls */
-/* Allow nfsservctl */
-/* Allow VM86_REQUEST_IRQ */
-/* Allow to read/write pci config on alpha */
-/* Allow irix_prctl on mips (setstacksize) */
-/* Allow flushing all cache on m68k (sys_cacheflush) */
-/* Allow removing semaphores */
-/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
-   and shared memory */
-/* Allow locking/unlocking of shared memory segment */
-/* Allow turning swap on/off */
-/* Allow forged pids on socket credentials passing */
-/* Allow setting readahead and flushing buffers on block devices */
-/* Allow setting geometry in floppy driver */
-/* Allow turning DMA on/off in xd driver */
-/* Allow administration of md devices (mostly the above, but some
-   extra ioctls) */
-/* Allow tuning the ide driver */
-/* Allow access to the nvram device */
-/* Allow administration of apm_bios, serial and bttv (TV) device */
-/* Allow manufacturer commands in isdn CAPI support driver */
-/* Allow reading non-standardized portions of pci configuration space */
-/* Allow DDI debug ioctl on sbpcd driver */
-/* Allow setting up serial ports */
-/* Allow sending raw qic-117 commands */
-/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
-   arbitrary SCSI commands */
-/* Allow setting encryption key on loopback filesystem */
-/* Allow setting zone reclaim policy */
-
-#define CAP_SYS_ADMIN        21
-
-/* Allow use of reboot() */
-
-#define CAP_SYS_BOOT         22
-
-/* Allow raising priority and setting priority on other (different
-   UID) processes */
-/* Allow use of FIFO and round-robin (realtime) scheduling on own
-   processes and setting the scheduling algorithm used by another
-   process. */
-/* Allow setting cpu affinity on other processes */
-
-#define CAP_SYS_NICE         23
-
-/* Override resource limits. Set resource limits. */
-/* Override quota limits. */
-/* Override reserved space on ext2 filesystem */
-/* Modify data journaling mode on ext3 filesystem (uses journaling
-   resources) */
-/* NOTE: ext2 honors fsuid when checking for resource overrides, so
-   you can override using fsuid too */
-/* Override size restrictions on IPC message queues */
-/* Allow more than 64hz interrupts from the real-time clock */
-/* Override max number of consoles on console allocation */
-/* Override max number of keymaps */
-
-#define CAP_SYS_RESOURCE     24
-
-/* Allow manipulation of system clock */
-/* Allow irix_stime on mips */
-/* Allow setting the real-time clock */
-
-#define CAP_SYS_TIME         25
-
-/* Allow configuration of tty devices */
-/* Allow vhangup() of tty */
-
-#define CAP_SYS_TTY_CONFIG   26
-
-/* Allow the privileged aspects of mknod() */
-
-#define CAP_MKNOD            27
-
-/* Allow taking of leases on files */
-
-#define CAP_LEASE            28
-
-#define CAP_AUDIT_WRITE      29
-
-#define CAP_AUDIT_CONTROL    30
-
-#define CAP_SETFCAP	     31
-
-/* Override MAC access.
-   The base kernel enforces no MAC policy.
-   An LSM may enforce a MAC policy, and if it does and it chooses
-   to implement capability based overrides of that policy, this is
-   the capability it should use to do so. */
-
-#define CAP_MAC_OVERRIDE     32
-
-/* Allow MAC configuration or state changes.
-   The base kernel requires no MAC configuration.
-   An LSM may enforce a MAC policy, and if it does and it chooses
-   to implement capability based checks on modifications to that
-   policy or the data required to maintain it, this is the
-   capability it should use to do so. */
-
-#define CAP_MAC_ADMIN        33
-
-/* Allow configuring the kernel's syslog (printk behaviour) */
-
-#define CAP_SYSLOG           34
-
-/* Allow triggering something that will wake the system */
-
-#define CAP_WAKE_ALARM            35
-
-/* Allow preventing system suspends */
-
-#define CAP_BLOCK_SUSPEND    36
-
-#define CAP_LAST_CAP         CAP_BLOCK_SUSPEND
-
-#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
-
-/*
- * Bit location of each capability (used by user-space library and kernel)
- */
-
-#define CAP_TO_INDEX(x)     ((x) >> 5)        /* 1 << 5 == bits in __u32 */
-#define CAP_TO_MASK(x)      (1 << ((x) & 31)) /* mask for indexed __u32 */
-
-#ifdef __KERNEL__
 
 struct inode;
 struct dentry;
@@ -557,6 +215,4 @@
 /* audit system wants to get cap info from files as well */
 extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps);
 
-#endif /* __KERNEL__ */
-
 #endif /* !_LINUX_CAPABILITY_H */
diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h
index 986493f..84b6e2d 100644
--- a/include/linux/cciss_ioctl.h
+++ b/include/linux/cciss_ioctl.h
@@ -1,91 +1,8 @@
 #ifndef CCISS_IOCTLH
 #define CCISS_IOCTLH
 
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/cciss_defs.h>
+#include <uapi/linux/cciss_ioctl.h>
 
-#define CCISS_IOC_MAGIC 'B'
-
-
-typedef struct _cciss_pci_info_struct
-{
-	unsigned char 	bus;
-	unsigned char 	dev_fn;
-	unsigned short	domain;
-	__u32 		board_id;
-} cciss_pci_info_struct; 
-
-typedef struct _cciss_coalint_struct
-{
-	__u32  delay;
-	__u32  count;
-} cciss_coalint_struct;
-
-typedef char NodeName_type[16];
-
-typedef __u32 Heartbeat_type;
-
-#define CISS_PARSCSIU2 	0x0001
-#define CISS_PARCSCIU3 	0x0002
-#define CISS_FIBRE1G	0x0100
-#define CISS_FIBRE2G	0x0200
-typedef __u32 BusTypes_type;
-
-typedef char FirmwareVer_type[4];
-typedef __u32 DriverVer_type;
-
-#define MAX_KMALLOC_SIZE 128000
-
-typedef struct _IOCTL_Command_struct {
-  LUNAddr_struct	   LUN_info;
-  RequestBlock_struct      Request;
-  ErrorInfo_struct  	   error_info; 
-  WORD			   buf_size;  /* size in bytes of the buf */
-  BYTE			   __user *buf;
-} IOCTL_Command_struct;
-
-typedef struct _BIG_IOCTL_Command_struct {
-  LUNAddr_struct	   LUN_info;
-  RequestBlock_struct      Request;
-  ErrorInfo_struct  	   error_info;
-  DWORD			   malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
-  DWORD			   buf_size;    /* size in bytes of the buf */
-  				        /* < malloc_size * MAXSGENTRIES */
-  BYTE			   __user *buf;
-} BIG_IOCTL_Command_struct;
-
-typedef struct _LogvolInfo_struct{
-	__u32	LunID;
-	int	num_opens;  /* number of opens on the logical volume */
-	int	num_parts;  /* number of partitions configured on logvol */
-} LogvolInfo_struct;
-
-#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
-
-#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
-#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
-
-#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
-#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
-
-#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
-#define CCISS_GETBUSTYPES  _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
-#define CCISS_GETFIRMVER   _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
-#define CCISS_GETDRIVVER   _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
-#define CCISS_REVALIDVOLS  _IO(CCISS_IOC_MAGIC, 10)
-#define CCISS_PASSTHRU	   _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
-#define CCISS_DEREGDISK	   _IO(CCISS_IOC_MAGIC, 12)
-
-/* no longer used... use REGNEWD instead */ 
-#define CCISS_REGNEWDISK  _IOW(CCISS_IOC_MAGIC, 13, int)
-
-#define CCISS_REGNEWD	   _IO(CCISS_IOC_MAGIC, 14)
-#define CCISS_RESCANDISK   _IO(CCISS_IOC_MAGIC, 16)
-#define CCISS_GETLUNINFO   _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
-#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 
 /* 32 bit compatible ioctl structs */
@@ -111,5 +28,4 @@
 #define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct)
 
 #endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
 #endif  
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
index dfd7f18..8609d57 100644
--- a/include/linux/cdrom.h
+++ b/include/linux/cdrom.h
@@ -7,910 +7,12 @@
  *               1997, 1998   Erik Andersen, andersee@debian.org
  *               1998-2002    Jens Axboe, axboe@suse.de
  */
- 
 #ifndef	_LINUX_CDROM_H
 #define	_LINUX_CDROM_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*******************************************************
- * As of Linux 2.1.x, all Linux CD-ROM application programs will use this 
- * (and only this) include file.  It is my hope to provide Linux with
- * a uniform interface between software accessing CD-ROMs and the various 
- * device drivers that actually talk to the drives.  There may still be
- * 23 different kinds of strange CD-ROM drives, but at least there will 
- * now be one, and only one, Linux CD-ROM interface.
- *
- * Additionally, as of Linux 2.1.x, all Linux application programs 
- * should use the O_NONBLOCK option when opening a CD-ROM device 
- * for subsequent ioctl commands.  This allows for neat system errors 
- * like "No medium found" or "Wrong medium type" upon attempting to 
- * mount or play an empty slot, mount an audio disc, or play a data disc.
- * Generally, changing an application program to support O_NONBLOCK
- * is as easy as the following:
- *       -    drive = open("/dev/cdrom", O_RDONLY);
- *       +    drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK);
- * It is worth the small change.
- *
- *  Patches for many common CD programs (provided by David A. van Leeuwen)
- *  can be found at:  ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/
- * 
- *******************************************************/
-
-/* When a driver supports a certain function, but the cdrom drive we are 
- * using doesn't, we will return the error EDRIVE_CANT_DO_THIS.  We will 
- * borrow the "Operation not supported" error from the network folks to 
- * accomplish this.  Maybe someday we will get a more targeted error code, 
- * but this will do for now... */
-#define EDRIVE_CANT_DO_THIS  EOPNOTSUPP
-
-/*******************************************************
- * The CD-ROM IOCTL commands  -- these should be supported by 
- * all the various cdrom drivers.  For the CD-ROM ioctls, we 
- * will commandeer byte 0x53, or 'S'.
- *******************************************************/
-#define CDROMPAUSE		0x5301 /* Pause Audio Operation */ 
-#define CDROMRESUME		0x5302 /* Resume paused Audio Operation */
-#define CDROMPLAYMSF		0x5303 /* Play Audio MSF (struct cdrom_msf) */
-#define CDROMPLAYTRKIND		0x5304 /* Play Audio Track/index 
-                                           (struct cdrom_ti) */
-#define CDROMREADTOCHDR		0x5305 /* Read TOC header 
-                                           (struct cdrom_tochdr) */
-#define CDROMREADTOCENTRY	0x5306 /* Read TOC entry 
-                                           (struct cdrom_tocentry) */
-#define CDROMSTOP		0x5307 /* Stop the cdrom drive */
-#define CDROMSTART		0x5308 /* Start the cdrom drive */
-#define CDROMEJECT		0x5309 /* Ejects the cdrom media */
-#define CDROMVOLCTRL		0x530a /* Control output volume 
-                                           (struct cdrom_volctrl) */
-#define CDROMSUBCHNL		0x530b /* Read subchannel data 
-                                           (struct cdrom_subchnl) */
-#define CDROMREADMODE2		0x530c /* Read CDROM mode 2 data (2336 Bytes) 
-                                           (struct cdrom_read) */
-#define CDROMREADMODE1		0x530d /* Read CDROM mode 1 data (2048 Bytes)
-                                           (struct cdrom_read) */
-#define CDROMREADAUDIO		0x530e /* (struct cdrom_read_audio) */
-#define CDROMEJECT_SW		0x530f /* enable(1)/disable(0) auto-ejecting */
-#define CDROMMULTISESSION	0x5310 /* Obtain the start-of-last-session 
-                                           address of multi session disks 
-                                           (struct cdrom_multisession) */
-#define CDROM_GET_MCN		0x5311 /* Obtain the "Universal Product Code" 
-                                           if available (struct cdrom_mcn) */
-#define CDROM_GET_UPC		CDROM_GET_MCN  /* This one is deprecated, 
-                                          but here anyway for compatibility */
-#define CDROMRESET		0x5312 /* hard-reset the drive */
-#define CDROMVOLREAD		0x5313 /* Get the drive's volume setting 
-                                          (struct cdrom_volctrl) */
-#define CDROMREADRAW		0x5314	/* read data in raw mode (2352 Bytes)
-                                           (struct cdrom_read) */
-/* 
- * These ioctls are used only used in aztcd.c and optcd.c
- */
-#define CDROMREADCOOKED		0x5315	/* read data in cooked mode */
-#define CDROMSEEK		0x5316  /* seek msf address */
-  
-/*
- * This ioctl is only used by the scsi-cd driver.  
-   It is for playing audio in logical block addressing mode.
- */
-#define CDROMPLAYBLK		0x5317	/* (struct cdrom_blk) */
-
-/* 
- * These ioctls are only used in optcd.c
- */
-#define CDROMREADALL		0x5318	/* read all 2646 bytes */
-
-/* 
- * These ioctls are (now) only in ide-cd.c for controlling 
- * drive spindown time.  They should be implemented in the
- * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
- * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
- *  -Erik
- */
-#define CDROMGETSPINDOWN        0x531d
-#define CDROMSETSPINDOWN        0x531e
-
-/* 
- * These ioctls are implemented through the uniform CD-ROM driver
- * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
- * drivers are eventually ported to the uniform CD-ROM driver interface.
- */
-#define CDROMCLOSETRAY		0x5319	/* pendant of CDROMEJECT */
-#define CDROM_SET_OPTIONS	0x5320  /* Set behavior options */
-#define CDROM_CLEAR_OPTIONS	0x5321  /* Clear behavior options */
-#define CDROM_SELECT_SPEED	0x5322  /* Set the CD-ROM speed */
-#define CDROM_SELECT_DISC	0x5323  /* Select disc (for juke-boxes) */
-#define CDROM_MEDIA_CHANGED	0x5325  /* Check is media changed  */
-#define CDROM_DRIVE_STATUS	0x5326  /* Get tray position, etc. */
-#define CDROM_DISC_STATUS	0x5327  /* Get disc type, etc. */
-#define CDROM_CHANGER_NSLOTS    0x5328  /* Get number of slots */
-#define CDROM_LOCKDOOR		0x5329  /* lock or unlock door */
-#define CDROM_DEBUG		0x5330	/* Turn debug messages on/off */
-#define CDROM_GET_CAPABILITY	0x5331	/* get capabilities */
-
-/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
- * Future CDROM ioctls should be kept below 0x537F
- */
-
-/* This ioctl is only used by sbpcd at the moment */
-#define CDROMAUDIOBUFSIZ        0x5382	/* set the audio buffer size */
-					/* conflict with SCSI_IOCTL_GET_IDLUN */
-
-/* DVD-ROM Specific ioctls */
-#define DVD_READ_STRUCT		0x5390  /* Read structure */
-#define DVD_WRITE_STRUCT	0x5391  /* Write structure */
-#define DVD_AUTH		0x5392  /* Authentication */
-
-#define CDROM_SEND_PACKET	0x5393	/* send a packet to the drive */
-#define CDROM_NEXT_WRITABLE	0x5394	/* get next writable block */
-#define CDROM_LAST_WRITTEN	0x5395	/* get last block written on disc */
-
-/*******************************************************
- * CDROM IOCTL structures
- *******************************************************/
-
-/* Address in MSF format */
-struct cdrom_msf0		
-{
-	__u8	minute;
-	__u8	second;
-	__u8	frame;
-};
-
-/* Address in either MSF or logical format */
-union cdrom_addr		
-{
-	struct cdrom_msf0	msf;
-	int			lba;
-};
-
-/* This struct is used by the CDROMPLAYMSF ioctl */ 
-struct cdrom_msf 
-{
-	__u8	cdmsf_min0;	/* start minute */
-	__u8	cdmsf_sec0;	/* start second */
-	__u8	cdmsf_frame0;	/* start frame */
-	__u8	cdmsf_min1;	/* end minute */
-	__u8	cdmsf_sec1;	/* end second */
-	__u8	cdmsf_frame1;	/* end frame */
-};
-
-/* This struct is used by the CDROMPLAYTRKIND ioctl */
-struct cdrom_ti 
-{
-	__u8	cdti_trk0;	/* start track */
-	__u8	cdti_ind0;	/* start index */
-	__u8	cdti_trk1;	/* end track */
-	__u8	cdti_ind1;	/* end index */
-};
-
-/* This struct is used by the CDROMREADTOCHDR ioctl */
-struct cdrom_tochdr 	
-{
-	__u8	cdth_trk0;	/* start track */
-	__u8	cdth_trk1;	/* end track */
-};
-
-/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */
-struct cdrom_volctrl
-{
-	__u8	channel0;
-	__u8	channel1;
-	__u8	channel2;
-	__u8	channel3;
-};
-
-/* This struct is used by the CDROMSUBCHNL ioctl */
-struct cdrom_subchnl 
-{
-	__u8	cdsc_format;
-	__u8	cdsc_audiostatus;
-	__u8	cdsc_adr:	4;
-	__u8	cdsc_ctrl:	4;
-	__u8	cdsc_trk;
-	__u8	cdsc_ind;
-	union cdrom_addr cdsc_absaddr;
-	union cdrom_addr cdsc_reladdr;
-};
-
-
-/* This struct is used by the CDROMREADTOCENTRY ioctl */
-struct cdrom_tocentry 
-{
-	__u8	cdte_track;
-	__u8	cdte_adr	:4;
-	__u8	cdte_ctrl	:4;
-	__u8	cdte_format;
-	union cdrom_addr cdte_addr;
-	__u8	cdte_datamode;
-};
-
-/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */
-struct cdrom_read      
-{
-	int	cdread_lba;
-	char 	*cdread_bufaddr;
-	int	cdread_buflen;
-};
-
-/* This struct is used by the CDROMREADAUDIO ioctl */
-struct cdrom_read_audio
-{
-	union cdrom_addr addr; /* frame address */
-	__u8 addr_format;      /* CDROM_LBA or CDROM_MSF */
-	int nframes;           /* number of 2352-byte-frames to read at once */
-	__u8 __user *buf;      /* frame buffer (size: nframes*2352 bytes) */
-};
-
-/* This struct is used with the CDROMMULTISESSION ioctl */
-struct cdrom_multisession
-{
-	union cdrom_addr addr; /* frame address: start-of-last-session 
-	                           (not the new "frame 16"!).  Only valid
-	                           if the "xa_flag" is true. */
-	__u8 xa_flag;        /* 1: "is XA disk" */
-	__u8 addr_format;    /* CDROM_LBA or CDROM_MSF */
-};
-
-/* This struct is used with the CDROM_GET_MCN ioctl.  
- * Very few audio discs actually have Universal Product Code information, 
- * which should just be the Medium Catalog Number on the box.  Also note 
- * that the way the codeis written on CD is _not_ uniform across all discs!
- */  
-struct cdrom_mcn 
-{
-  __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */
-};
-
-/* This is used by the CDROMPLAYBLK ioctl */
-struct cdrom_blk 
-{
-	unsigned from;
-	unsigned short len;
-};
-
-#define CDROM_PACKET_SIZE	12
-
-#define CGC_DATA_UNKNOWN	0
-#define CGC_DATA_WRITE		1
-#define CGC_DATA_READ		2
-#define CGC_DATA_NONE		3
-
-/* for CDROM_PACKET_COMMAND ioctl */
-struct cdrom_generic_command
-{
-	unsigned char 		cmd[CDROM_PACKET_SIZE];
-	unsigned char		__user *buffer;
-	unsigned int 		buflen;
-	int			stat;
-	struct request_sense	__user *sense;
-	unsigned char		data_direction;
-	int			quiet;
-	int			timeout;
-	void			__user *reserved[1];	/* unused, actually */
-};
-
-/*
- * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, 
- * 2340, or 2352 bytes long.  
-
-*         Sector types of the standard CD-ROM data formats:
- *
- * format   sector type               user data size (bytes)
- * -----------------------------------------------------------------------------
- *   1     (Red Book)    CD-DA          2352    (CD_FRAMESIZE_RAW)
- *   2     (Yellow Book) Mode1 Form1    2048    (CD_FRAMESIZE)
- *   3     (Yellow Book) Mode1 Form2    2336    (CD_FRAMESIZE_RAW0)
- *   4     (Green Book)  Mode2 Form1    2048    (CD_FRAMESIZE)
- *   5     (Green Book)  Mode2 Form2    2328    (2324+4 spare bytes)
- *
- *
- *       The layout of the standard CD-ROM data formats:
- * -----------------------------------------------------------------------------
- * - audio (red):                  | audio_sample_bytes |
- *                                 |        2352        |
- *
- * - data (yellow, mode1):         | sync - head - data - EDC - zero - ECC |
- *                                 |  12  -   4  - 2048 -  4  -   8  - 276 |
- *
- * - data (yellow, mode2):         | sync - head - data |
- *                                 |  12  -   4  - 2336 |
- *
- * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC |
- *                                 |  12  -   4  -  8  - 2048 -  4  - 276 |
- *
- * - XA data (green, mode2 form2): | sync - head - sub - data - Spare |
- *                                 |  12  -   4  -  8  - 2324 -  4    |
- *
- */
-
-/* Some generally useful CD-ROM information -- mostly based on the above */
-#define CD_MINS              74 /* max. minutes per CD, not really a limit */
-#define CD_SECS              60 /* seconds per minute */
-#define CD_FRAMES            75 /* frames per second */
-#define CD_SYNC_SIZE         12 /* 12 sync bytes per raw data frame */
-#define CD_MSF_OFFSET       150 /* MSF numbering offset of first frame */
-#define CD_CHUNK_SIZE        24 /* lowest-level "data bytes piece" */
-#define CD_NUM_OF_CHUNKS     98 /* chunks per frame */
-#define CD_FRAMESIZE_SUB     96 /* subchannel data "frame" size */
-#define CD_HEAD_SIZE          4 /* header (address) bytes per raw data frame */
-#define CD_SUBHEAD_SIZE       8 /* subheader bytes per raw XA data frame */
-#define CD_EDC_SIZE           4 /* bytes EDC per most raw data frame types */
-#define CD_ZERO_SIZE          8 /* bytes zero per yellow book mode 1 frame */
-#define CD_ECC_SIZE         276 /* bytes ECC per most raw data frame types */
-#define CD_FRAMESIZE       2048 /* bytes per frame, "cooked" mode */
-#define CD_FRAMESIZE_RAW   2352 /* bytes per frame, "raw" mode */
-#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ 
-/* most drives don't deliver everything: */
-#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
-#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
-
-#define CD_XA_HEAD        (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */
-#define CD_XA_TAIL        (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */
-#define CD_XA_SYNC_HEAD   (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */
-
-/* CD-ROM address types (cdrom_tocentry.cdte_format) */
-#define	CDROM_LBA 0x01 /* "logical block": first frame is #0 */
-#define	CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */
-
-/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */
-#define	CDROM_DATA_TRACK	0x04
-
-/* The leadout track is always 0xAA, regardless of # of tracks on disc */
-#define	CDROM_LEADOUT		0xAA
-
-/* audio states (from SCSI-2, but seen with other drives, too) */
-#define	CDROM_AUDIO_INVALID	0x00	/* audio status not supported */
-#define	CDROM_AUDIO_PLAY	0x11	/* audio play operation in progress */
-#define	CDROM_AUDIO_PAUSED	0x12	/* audio play operation paused */
-#define	CDROM_AUDIO_COMPLETED	0x13	/* audio play successfully completed */
-#define	CDROM_AUDIO_ERROR	0x14	/* audio play stopped due to error */
-#define	CDROM_AUDIO_NO_STATUS	0x15	/* no current audio status to return */
-
-/* capability flags used with the uniform CD-ROM driver */ 
-#define CDC_CLOSE_TRAY		0x1     /* caddy systems _can't_ close */
-#define CDC_OPEN_TRAY		0x2     /* but _can_ eject.  */
-#define CDC_LOCK		0x4     /* disable manual eject */
-#define CDC_SELECT_SPEED 	0x8     /* programmable speed */
-#define CDC_SELECT_DISC		0x10    /* select disc from juke-box */
-#define CDC_MULTI_SESSION 	0x20    /* read sessions>1 */
-#define CDC_MCN			0x40    /* Medium Catalog Number */
-#define CDC_MEDIA_CHANGED 	0x80    /* media changed */
-#define CDC_PLAY_AUDIO		0x100   /* audio functions */
-#define CDC_RESET               0x200   /* hard reset device */
-#define CDC_DRIVE_STATUS        0x800   /* driver implements drive status */
-#define CDC_GENERIC_PACKET	0x1000	/* driver implements generic packets */
-#define CDC_CD_R		0x2000	/* drive is a CD-R */
-#define CDC_CD_RW		0x4000	/* drive is a CD-RW */
-#define CDC_DVD			0x8000	/* drive is a DVD */
-#define CDC_DVD_R		0x10000	/* drive can write DVD-R */
-#define CDC_DVD_RAM		0x20000	/* drive can write DVD-RAM */
-#define CDC_MO_DRIVE		0x40000 /* drive is an MO device */
-#define CDC_MRW			0x80000 /* drive can read MRW */
-#define CDC_MRW_W		0x100000 /* drive can write MRW */
-#define CDC_RAM			0x200000 /* ok to open for WRITE */
-
-/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
-#define CDS_NO_INFO		0	/* if not implemented */
-#define CDS_NO_DISC		1
-#define CDS_TRAY_OPEN		2
-#define CDS_DRIVE_NOT_READY	3
-#define CDS_DISC_OK		4
-
-/* return values for the CDROM_DISC_STATUS ioctl */
-/* can also return CDS_NO_[INFO|DISC], from above */
-#define CDS_AUDIO		100
-#define CDS_DATA_1		101
-#define CDS_DATA_2		102
-#define CDS_XA_2_1		103
-#define CDS_XA_2_2		104
-#define CDS_MIXED		105
-
-/* User-configurable behavior options for the uniform CD-ROM driver */
-#define CDO_AUTO_CLOSE		0x1     /* close tray on first open() */
-#define CDO_AUTO_EJECT		0x2     /* open tray on last release() */
-#define CDO_USE_FFLAGS		0x4     /* use O_NONBLOCK information on open */
-#define CDO_LOCK		0x8     /* lock tray on open files */
-#define CDO_CHECK_TYPE		0x10    /* check type on open for data */
-
-/* Special codes used when specifying changer slots. */
-#define CDSL_NONE       	(INT_MAX-1)
-#define CDSL_CURRENT    	INT_MAX
-
-/* For partition based multisession access. IDE can handle 64 partitions
- * per drive - SCSI CD-ROM's use minors to differentiate between the
- * various drives, so we can't do multisessions the same way there.
- * Use the -o session=x option to mount on them.
- */
-#define CD_PART_MAX		64
-#define CD_PART_MASK		(CD_PART_MAX - 1)
-
-/*********************************************************************
- * Generic Packet commands, MMC commands, and such
- *********************************************************************/
-
- /* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-#define GPCMD_BLANK			    0xa1
-#define GPCMD_CLOSE_TRACK		    0x5b
-#define GPCMD_FLUSH_CACHE		    0x35
-#define GPCMD_FORMAT_UNIT		    0x04
-#define GPCMD_GET_CONFIGURATION		    0x46
-#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define GPCMD_GET_PERFORMANCE		    0xac
-#define GPCMD_INQUIRY			    0x12
-#define GPCMD_LOAD_UNLOAD		    0xa6
-#define GPCMD_MECHANISM_STATUS		    0xbd
-#define GPCMD_MODE_SELECT_10		    0x55
-#define GPCMD_MODE_SENSE_10		    0x5a
-#define GPCMD_PAUSE_RESUME		    0x4b
-#define GPCMD_PLAY_AUDIO_10		    0x45
-#define GPCMD_PLAY_AUDIO_MSF		    0x47
-#define GPCMD_PLAY_AUDIO_TI		    0x48
-#define GPCMD_PLAY_CD			    0xbc
-#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
-#define GPCMD_READ_10			    0x28
-#define GPCMD_READ_12			    0xa8
-#define GPCMD_READ_BUFFER		    0x3c
-#define GPCMD_READ_BUFFER_CAPACITY	    0x5c
-#define GPCMD_READ_CDVD_CAPACITY	    0x25
-#define GPCMD_READ_CD			    0xbe
-#define GPCMD_READ_CD_MSF		    0xb9
-#define GPCMD_READ_DISC_INFO		    0x51
-#define GPCMD_READ_DVD_STRUCTURE	    0xad
-#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
-#define GPCMD_READ_HEADER		    0x44
-#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
-#define GPCMD_READ_SUBCHANNEL		    0x42
-#define GPCMD_READ_TOC_PMA_ATIP		    0x43
-#define GPCMD_REPAIR_RZONE_TRACK	    0x58
-#define GPCMD_REPORT_KEY		    0xa4
-#define GPCMD_REQUEST_SENSE		    0x03
-#define GPCMD_RESERVE_RZONE_TRACK	    0x53
-#define GPCMD_SEND_CUE_SHEET		    0x5d
-#define GPCMD_SCAN			    0xba
-#define GPCMD_SEEK			    0x2b
-#define GPCMD_SEND_DVD_STRUCTURE	    0xbf
-#define GPCMD_SEND_EVENT		    0xa2
-#define GPCMD_SEND_KEY			    0xa3
-#define GPCMD_SEND_OPC			    0x54
-#define GPCMD_SET_READ_AHEAD		    0xa7
-#define GPCMD_SET_STREAMING		    0xb6
-#define GPCMD_START_STOP_UNIT		    0x1b
-#define GPCMD_STOP_PLAY_SCAN		    0x4e
-#define GPCMD_TEST_UNIT_READY		    0x00
-#define GPCMD_VERIFY_10			    0x2f
-#define GPCMD_WRITE_10			    0x2a
-#define GPCMD_WRITE_12			    0xaa
-#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
-#define GPCMD_WRITE_BUFFER		    0x3b
-/* This is listed as optional in ATAPI 2.6, but is (curiously) 
- * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
- * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
- * drives support it. */
-#define GPCMD_SET_SPEED			    0xbb
-/* This seems to be a SCSI specific CD-ROM opcode 
- * to play data at track/index */
-#define GPCMD_PLAYAUDIO_TI		    0x48
-/*
- * From MS Media Status Notification Support Specification. For
- * older drives only.
- */
-#define GPCMD_GET_MEDIA_STATUS		    0xda
-
-/* Mode page codes for mode sense/set */
-#define GPMODE_VENDOR_PAGE		0x00
-#define GPMODE_R_W_ERROR_PAGE		0x01
-#define GPMODE_WRITE_PARMS_PAGE		0x05
-#define GPMODE_WCACHING_PAGE		0x08
-#define GPMODE_AUDIO_CTL_PAGE		0x0e
-#define GPMODE_POWER_PAGE		0x1a
-#define GPMODE_FAULT_FAIL_PAGE		0x1c
-#define GPMODE_TO_PROTECT_PAGE		0x1d
-#define GPMODE_CAPABILITIES_PAGE	0x2a
-#define GPMODE_ALL_PAGES		0x3f
-/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
- * of MODE_SENSE_POWER_PAGE */
-#define GPMODE_CDROM_PAGE		0x0d
-
-
-
-/* DVD struct types */
-#define DVD_STRUCT_PHYSICAL	0x00
-#define DVD_STRUCT_COPYRIGHT	0x01
-#define DVD_STRUCT_DISCKEY	0x02
-#define DVD_STRUCT_BCA		0x03
-#define DVD_STRUCT_MANUFACT	0x04
-
-struct dvd_layer {
-	__u8 book_version	: 4;
-	__u8 book_type		: 4;
-	__u8 min_rate		: 4;
-	__u8 disc_size		: 4;
-	__u8 layer_type		: 4;
-	__u8 track_path		: 1;
-	__u8 nlayers		: 2;
-	__u8 track_density	: 4;
-	__u8 linear_density	: 4;
-	__u8 bca		: 1;
-	__u32 start_sector;
-	__u32 end_sector;
-	__u32 end_sector_l0;
-};
-
-#define DVD_LAYERS	4
-
-struct dvd_physical {
-	__u8 type;
-	__u8 layer_num;
-	struct dvd_layer layer[DVD_LAYERS];
-};
-
-struct dvd_copyright {
-	__u8 type;
-
-	__u8 layer_num;
-	__u8 cpst;
-	__u8 rmi;
-};
-
-struct dvd_disckey {
-	__u8 type;
-
-	unsigned agid		: 2;
-	__u8 value[2048];
-};
-
-struct dvd_bca {
-	__u8 type;
-
-	int len;
-	__u8 value[188];
-};
-
-struct dvd_manufact {
-	__u8 type;
-
-	__u8 layer_num;
-	int len;
-	__u8 value[2048];
-};
-
-typedef union {
-	__u8 type;
-
-	struct dvd_physical	physical;
-	struct dvd_copyright	copyright;
-	struct dvd_disckey	disckey;
-	struct dvd_bca		bca;
-	struct dvd_manufact	manufact;
-} dvd_struct;
-
-/*
- * DVD authentication ioctl
- */
-
-/* Authentication states */
-#define DVD_LU_SEND_AGID	0
-#define DVD_HOST_SEND_CHALLENGE	1
-#define DVD_LU_SEND_KEY1	2
-#define DVD_LU_SEND_CHALLENGE	3
-#define DVD_HOST_SEND_KEY2	4
-
-/* Termination states */
-#define DVD_AUTH_ESTABLISHED	5
-#define DVD_AUTH_FAILURE	6
-
-/* Other functions */
-#define DVD_LU_SEND_TITLE_KEY	7
-#define DVD_LU_SEND_ASF		8
-#define DVD_INVALIDATE_AGID	9
-#define DVD_LU_SEND_RPC_STATE	10
-#define DVD_HOST_SEND_RPC_STATE	11
-
-/* State data */
-typedef __u8 dvd_key[5];		/* 40-bit value, MSB is first elem. */
-typedef __u8 dvd_challenge[10];	/* 80-bit value, MSB is first elem. */
-
-struct dvd_lu_send_agid {
-	__u8 type;
-	unsigned agid		: 2;
-};
-
-struct dvd_host_send_challenge {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_challenge chal;
-};
-
-struct dvd_send_key {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_key key;
-};
-
-struct dvd_lu_send_challenge {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_challenge chal;
-};
-
-#define DVD_CPM_NO_COPYRIGHT	0
-#define DVD_CPM_COPYRIGHTED	1
-
-#define DVD_CP_SEC_NONE		0
-#define DVD_CP_SEC_EXIST	1
-
-#define DVD_CGMS_UNRESTRICTED	0
-#define DVD_CGMS_SINGLE		2
-#define DVD_CGMS_RESTRICTED	3
-
-struct dvd_lu_send_title_key {
-	__u8 type;
-	unsigned agid		: 2;
-
-	dvd_key title_key;
-	int lba;
-	unsigned cpm		: 1;
-	unsigned cp_sec		: 1;
-	unsigned cgms		: 2;
-};
-
-struct dvd_lu_send_asf {
-	__u8 type;
-	unsigned agid		: 2;
-
-	unsigned asf		: 1;
-};
-
-struct dvd_host_send_rpcstate {
-	__u8 type;
-	__u8 pdrc;
-};
-
-struct dvd_lu_send_rpcstate {
-	__u8 type		: 2;
-	__u8 vra		: 3;
-	__u8 ucca		: 3;
-	__u8 region_mask;
-	__u8 rpc_scheme;
-};
-
-typedef union {
-	__u8 type;
-
-	struct dvd_lu_send_agid		lsa;
-	struct dvd_host_send_challenge	hsc;
-	struct dvd_send_key		lsk;
-	struct dvd_lu_send_challenge	lsc;
-	struct dvd_send_key		hsk;
-	struct dvd_lu_send_title_key	lstk;
-	struct dvd_lu_send_asf		lsasf;
-	struct dvd_host_send_rpcstate	hrpcs;
-	struct dvd_lu_send_rpcstate	lrpcs;
-} dvd_authinfo;
-
-struct request_sense {
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 valid		: 1;
-	__u8 error_code		: 7;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 error_code		: 7;
-	__u8 valid		: 1;
-#endif
-	__u8 segment_number;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 2;
-	__u8 ili		: 1;
-	__u8 reserved2		: 1;
-	__u8 sense_key		: 4;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 sense_key		: 4;
-	__u8 reserved2		: 1;
-	__u8 ili		: 1;
-	__u8 reserved1		: 2;
-#endif
-	__u8 information[4];
-	__u8 add_sense_len;
-	__u8 command_info[4];
-	__u8 asc;
-	__u8 ascq;
-	__u8 fruc;
-	__u8 sks[3];
-	__u8 asb[46];
-};
-
-/*
- * feature profile
- */
-#define CDF_RWRT	0x0020	/* "Random Writable" */
-#define CDF_HWDM	0x0024	/* "Hardware Defect Management" */
-#define CDF_MRW 	0x0028
-
-/*
- * media status bits
- */
-#define CDM_MRW_NOTMRW			0
-#define CDM_MRW_BGFORMAT_INACTIVE	1
-#define CDM_MRW_BGFORMAT_ACTIVE		2
-#define CDM_MRW_BGFORMAT_COMPLETE	3
-
-/*
- * mrw address spaces
- */
-#define MRW_LBA_DMA			0
-#define MRW_LBA_GAA			1
-
-/*
- * mrw mode pages (first is deprecated) -- probed at init time and
- * cdi->mrw_mode_page is set
- */
-#define MRW_MODE_PC_PRE1		0x2c
-#define MRW_MODE_PC			0x03
-
-struct mrw_feature_desc {
-	__be16 feature_code;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 2;
-	__u8 feature_version	: 4;
-	__u8 persistent		: 1;
-	__u8 curr		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 curr		: 1;
-	__u8 persistent		: 1;
-	__u8 feature_version	: 4;
-	__u8 reserved1		: 2;
-#endif
-	__u8 add_len;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved2		: 7;
-	__u8 write		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 write		: 1;
-	__u8 reserved2		: 7;
-#endif
-	__u8 reserved3;
-	__u8 reserved4;
-	__u8 reserved5;
-};
-
-/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */
-struct rwrt_feature_desc {
-	__be16 feature_code;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1		: 2;
-	__u8 feature_version	: 4;
-	__u8 persistent		: 1;
-	__u8 curr		: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 curr		: 1;
-	__u8 persistent		: 1;
-	__u8 feature_version	: 4;
-	__u8 reserved1		: 2;
-#endif
-	__u8 add_len;
-	__u32 last_lba;
-	__u32 block_size;
-	__u16 blocking;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved2		: 7;
-	__u8 page_present	: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 page_present	: 1;
-	__u8 reserved2		: 7;
-#endif
-	__u8 reserved3;
-};
-
-typedef struct {
-	__be16 disc_information_length;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved1			: 3;
-        __u8 erasable			: 1;
-        __u8 border_status		: 2;
-        __u8 disc_status		: 2;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-        __u8 disc_status		: 2;
-        __u8 border_status		: 2;
-        __u8 erasable			: 1;
-	__u8 reserved1			: 3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-	__u8 n_first_track;
-	__u8 n_sessions_lsb;
-	__u8 first_track_lsb;
-	__u8 last_track_lsb;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 did_v			: 1;
-        __u8 dbc_v			: 1;
-        __u8 uru			: 1;
-        __u8 reserved2			: 2;
-	__u8 dbit			: 1;
-	__u8 mrw_status			: 2;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 mrw_status			: 2;
-	__u8 dbit			: 1;
-        __u8 reserved2			: 2;
-        __u8 uru			: 1;
-        __u8 dbc_v			: 1;
-	__u8 did_v			: 1;
-#endif
-	__u8 disc_type;
-	__u8 n_sessions_msb;
-	__u8 first_track_msb;
-	__u8 last_track_msb;
-	__u32 disc_id;
-	__u32 lead_in;
-	__u32 lead_out;
-	__u8 disc_bar_code[8];
-	__u8 reserved3;
-	__u8 n_opc;
-} disc_information;
-
-typedef struct {
-	__be16 track_information_length;
-	__u8 track_lsb;
-	__u8 session_lsb;
-	__u8 reserved1;
-#if defined(__BIG_ENDIAN_BITFIELD)
-	__u8 reserved2			: 2;
-        __u8 damage			: 1;
-        __u8 copy			: 1;
-        __u8 track_mode			: 4;
-	__u8 rt				: 1;
-	__u8 blank			: 1;
-	__u8 packet			: 1;
-	__u8 fp				: 1;
-	__u8 data_mode			: 4;
-	__u8 reserved3			: 6;
-	__u8 lra_v			: 1;
-	__u8 nwa_v			: 1;
-#elif defined(__LITTLE_ENDIAN_BITFIELD)
-        __u8 track_mode			: 4;
-        __u8 copy			: 1;
-        __u8 damage			: 1;
-	__u8 reserved2			: 2;
-	__u8 data_mode			: 4;
-	__u8 fp				: 1;
-	__u8 packet			: 1;
-	__u8 blank			: 1;
-	__u8 rt				: 1;
-	__u8 nwa_v			: 1;
-	__u8 lra_v			: 1;
-	__u8 reserved3			: 6;
-#endif
-	__be32 track_start;
-	__be32 next_writable;
-	__be32 free_blocks;
-	__be32 fixed_packet_size;
-	__be32 track_size;
-	__be32 last_rec_address;
-} track_information;
-
-struct feature_header {
-	__u32 data_len;
-	__u8 reserved1;
-	__u8 reserved2;
-	__u16 curr_profile;
-};
-
-struct mode_page_header {
-	__be16 mode_data_length;
-	__u8 medium_type;
-	__u8 reserved1;
-	__u8 reserved2;
-	__u8 reserved3;
-	__be16 desc_length;
-};
-
-#ifdef __KERNEL__
 #include <linux/fs.h>		/* not really needed, later.. */
 #include <linux/list.h>
+#include <uapi/linux/cdrom.h>
 
 struct packet_command
 {
@@ -1209,6 +311,4 @@
 {
 	return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
 }
-#endif  /* End of kernel only stuff */ 
-
 #endif  /* _LINUX_CDROM_H */
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index fbe89e1..4dceaf8 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -319,22 +319,6 @@
 	__clocksource_updatefreq_scale(cs, 1000, khz);
 }
 
-#ifdef CONFIG_GENERIC_TIME_VSYSCALL
-extern void
-update_vsyscall(struct timespec *ts, struct timespec *wtm,
-			struct clocksource *c, u32 mult);
-extern void update_vsyscall_tz(void);
-#else
-static inline void
-update_vsyscall(struct timespec *ts, struct timespec *wtm,
-			struct clocksource *c, u32 mult)
-{
-}
-
-static inline void update_vsyscall_tz(void)
-{
-}
-#endif
 
 extern void timekeeping_notify(struct clocksource *clock);
 
diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h
index 3c4aac4..88bee3a 100644
--- a/include/linux/cm4000_cs.h
+++ b/include/linux/cm4000_cs.h
@@ -1,68 +1,10 @@
 #ifndef	_CM4000_H_
 #define	_CM4000_H_
 
-#include <linux/types.h>
+#include <uapi/linux/cm4000_cs.h>
 
-#define	MAX_ATR			33
-
-#define	CM4000_MAX_DEV		4
-
-/* those two structures are passed via ioctl() from/to userspace.  They are
- * used by existing userspace programs, so I kepth the awkward "bIFSD" naming
- * not to break compilation of userspace apps. -HW */
-
-typedef struct atreq {
-	__s32 atr_len;
-	unsigned char atr[64];
-	__s32 power_act;
-	unsigned char bIFSD;
-	unsigned char bIFSC;
-} atreq_t;
-
-
-/* what is particularly stupid in the original driver is the arch-dependent
- * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
- * will lay out the structure members differently than the 64bit kernel.
- *
- * I've changed "ptsreq.protocol" from "unsigned long" to "__u32".
- * On 32bit this will make no difference.  With 64bit kernels, it will make
- * 32bit apps work, too.
- */
-
-typedef struct ptsreq {
-	__u32 protocol; /*T=0: 2^0, T=1:  2^1*/
- 	unsigned char flags;
- 	unsigned char pts1;
- 	unsigned char pts2;
-	unsigned char pts3;
-} ptsreq_t;
-
-#define	CM_IOC_MAGIC		'c'
-#define	CM_IOC_MAXNR	        255
-
-#define	CM_IOCGSTATUS		_IOR (CM_IOC_MAGIC, 0, unsigned char *)
-#define	CM_IOCGATR		_IOWR(CM_IOC_MAGIC, 1, atreq_t *)
-#define	CM_IOCSPTS		_IOW (CM_IOC_MAGIC, 2, ptsreq_t *)
-#define	CM_IOCSRDR		_IO  (CM_IOC_MAGIC, 3)
-#define CM_IOCARDOFF            _IO  (CM_IOC_MAGIC, 4)
-
-#define CM_IOSDBGLVL            _IOW(CM_IOC_MAGIC, 250, int*)
-
-/* card and device states */
-#define	CM_CARD_INSERTED		0x01
-#define	CM_CARD_POWERED			0x02
-#define	CM_ATR_PRESENT			0x04
-#define	CM_ATR_VALID	 		0x08
-#define	CM_STATE_VALID			0x0f
-/* extra info only from CM4000 */
-#define	CM_NO_READER			0x10
-#define	CM_BAD_CARD			0x20
-
-
-#ifdef __KERNEL__
 
 #define	DEVICE_NAME		"cmm"
 #define	MODULE_NAME		"cm4000_cs"
 
-#endif	/* __KERNEL__ */
 #endif	/* _CM4000_H_ */
diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h
index d03612b..2c1bc1e 100644
--- a/include/linux/cn_proc.h
+++ b/include/linux/cn_proc.h
@@ -14,111 +14,11 @@
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  */
-
 #ifndef CN_PROC_H
 #define CN_PROC_H
 
-#include <linux/types.h>
+#include <uapi/linux/cn_proc.h>
 
-/*
- * Userspace sends this enum to register with the kernel that it is listening
- * for events on the connector.
- */
-enum proc_cn_mcast_op {
-	PROC_CN_MCAST_LISTEN = 1,
-	PROC_CN_MCAST_IGNORE = 2
-};
-
-/*
- * From the user's point of view, the process
- * ID is the thread group ID and thread ID is the internal
- * kernel "pid". So, fields are assigned as follow:
- *
- *  In user space     -  In  kernel space
- *
- * parent process ID  =  parent->tgid
- * parent thread  ID  =  parent->pid
- * child  process ID  =  child->tgid
- * child  thread  ID  =  child->pid
- */
-
-struct proc_event {
-	enum what {
-		/* Use successive bits so the enums can be used to record
-		 * sets of events as well
-		 */
-		PROC_EVENT_NONE = 0x00000000,
-		PROC_EVENT_FORK = 0x00000001,
-		PROC_EVENT_EXEC = 0x00000002,
-		PROC_EVENT_UID  = 0x00000004,
-		PROC_EVENT_GID  = 0x00000040,
-		PROC_EVENT_SID  = 0x00000080,
-		PROC_EVENT_PTRACE = 0x00000100,
-		PROC_EVENT_COMM = 0x00000200,
-		/* "next" should be 0x00000400 */
-		/* "last" is the last process event: exit */
-		PROC_EVENT_EXIT = 0x80000000
-	} what;
-	__u32 cpu;
-	__u64 __attribute__((aligned(8))) timestamp_ns;
-		/* Number of nano seconds since system boot */
-	union { /* must be last field of proc_event struct */
-		struct {
-			__u32 err;
-		} ack;
-
-		struct fork_proc_event {
-			__kernel_pid_t parent_pid;
-			__kernel_pid_t parent_tgid;
-			__kernel_pid_t child_pid;
-			__kernel_pid_t child_tgid;
-		} fork;
-
-		struct exec_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-		} exec;
-
-		struct id_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			union {
-				__u32 ruid; /* task uid */
-				__u32 rgid; /* task gid */
-			} r;
-			union {
-				__u32 euid;
-				__u32 egid;
-			} e;
-		} id;
-
-		struct sid_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-		} sid;
-
-		struct ptrace_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			__kernel_pid_t tracer_pid;
-			__kernel_pid_t tracer_tgid;
-		} ptrace;
-
-		struct comm_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			char           comm[16];
-		} comm;
-
-		struct exit_proc_event {
-			__kernel_pid_t process_pid;
-			__kernel_pid_t process_tgid;
-			__u32 exit_code, exit_signal;
-		} exit;
-	} event_data;
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_PROC_EVENTS
 void proc_fork_connector(struct task_struct *task);
 void proc_exec_connector(struct task_struct *task);
@@ -151,5 +51,4 @@
 static inline void proc_exit_connector(struct task_struct *task)
 {}
 #endif	/* CONFIG_PROC_EVENTS */
-#endif	/* __KERNEL__ */
 #endif	/* CN_PROC_H */
diff --git a/include/linux/coda.h b/include/linux/coda.h
index 96c8769..cff544f 100644
--- a/include/linux/coda.h
+++ b/include/linux/coda.h
@@ -55,690 +55,12 @@
  * Linux modifications by 
  * Peter Braam, Aug 1996
  */
-
 #ifndef _CODA_HEADER_
 #define _CODA_HEADER_
 
-
-/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
-#if defined(__NetBSD__) || \
-  ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
-#include <sys/types.h>
-#endif 
-
-#ifndef CODA_MAXSYMLINKS
-#define CODA_MAXSYMLINKS 10
-#endif
-
-#if defined(DJGPP) || defined(__CYGWIN32__)
-#ifdef KERNEL
-typedef unsigned long u_long;
-typedef unsigned int u_int;
-typedef unsigned short u_short;
-typedef u_long ino_t;
-typedef u_long dev_t;
-typedef void * caddr_t;
-#ifdef DOS
-typedef unsigned __int64 u_quad_t;
-#else 
-typedef unsigned long long u_quad_t;
-#endif
-
-#define inline
-
-struct timespec {
-        long       ts_sec;
-        long       ts_nsec;
-};
-#else  /* DJGPP but not KERNEL */
-#include <sys/time.h>
-typedef unsigned long long u_quad_t;
-#endif /* !KERNEL */
-#endif /* !DJGPP */
-
-
 #if defined(__linux__)
-#include <linux/time.h>
-#define cdev_t u_quad_t
-#ifndef __KERNEL__
-#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
-#define _UQUAD_T_ 1
 typedef unsigned long long u_quad_t;
-#endif
-#else /*__KERNEL__ */
-typedef unsigned long long u_quad_t;
-#endif /* __KERNEL__ */
 #else
-#define cdev_t dev_t
 #endif
-
-#ifdef __CYGWIN32__
-struct timespec {
-        time_t  tv_sec;         /* seconds */
-        long    tv_nsec;        /* nanoseconds */
-};
-#endif
-
-#ifndef __BIT_TYPES_DEFINED__
-#define __BIT_TYPES_DEFINED__
-typedef signed char	      int8_t;
-typedef unsigned char	    u_int8_t;
-typedef short		     int16_t;
-typedef unsigned short	   u_int16_t;
-typedef int		     int32_t;
-typedef unsigned int	   u_int32_t;
-#endif
-
-
-/*
- * Cfs constants
- */
-#define CODA_MAXNAMLEN   255
-#define CODA_MAXPATHLEN  1024
-#define CODA_MAXSYMLINK  10
-
-/* these are Coda's version of O_RDONLY etc combinations
- * to deal with VFS open modes
- */
-#define	C_O_READ	0x001
-#define	C_O_WRITE       0x002
-#define C_O_TRUNC       0x010
-#define C_O_EXCL	0x100
-#define C_O_CREAT	0x200
-
-/* these are to find mode bits in Venus */ 
-#define C_M_READ  00400
-#define C_M_WRITE 00200
-
-/* for access Venus will use */
-#define C_A_C_OK    8               /* Test for writing upon create.  */
-#define C_A_R_OK    4               /* Test for read permission.  */
-#define C_A_W_OK    2               /* Test for write permission.  */
-#define C_A_X_OK    1               /* Test for execute permission.  */
-#define C_A_F_OK    0               /* Test for existence.  */
-
-
-
-#ifndef _VENUS_DIRENT_T_
-#define _VENUS_DIRENT_T_ 1
-struct venus_dirent {
-        u_int32_t d_fileno;		/* file number of entry */
-        u_int16_t d_reclen;		/* length of this record */
-        u_int8_t  d_type;			/* file type, see below */
-        u_int8_t  d_namlen;		/* length of string in d_name */
-        char	  d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
-};
-#undef DIRSIZ
-#define DIRSIZ(dp)      ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
-                         (((dp)->d_namlen+1 + 3) &~ 3))
-
-/*
- * File types
- */
-#define	CDT_UNKNOWN	 0
-#define	CDT_FIFO	 1
-#define	CDT_CHR		 2
-#define	CDT_DIR		 4
-#define	CDT_BLK		 6
-#define	CDT_REG		 8
-#define	CDT_LNK		10
-#define	CDT_SOCK	12
-#define	CDT_WHT		14
-
-/*
- * Convert between stat structure types and directory types.
- */
-#define	IFTOCDT(mode)	(((mode) & 0170000) >> 12)
-#define	CDTTOIF(dirtype)	((dirtype) << 12)
-
-#endif
-
-#ifndef _VUID_T_
-#define _VUID_T_
-typedef u_int32_t vuid_t;
-typedef u_int32_t vgid_t;
-#endif /*_VUID_T_ */
-
-struct CodaFid {
-	u_int32_t opaque[4];
-};
-
-#define coda_f2i(fid)\
-	(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
-
-#ifndef _VENUS_VATTR_T_
-#define _VENUS_VATTR_T_
-/*
- * Vnode types.  VNON means no type.
- */
-enum coda_vtype	{ C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
-
-struct coda_vattr {
-	long     	va_type;	/* vnode type (for create) */
-	u_short		va_mode;	/* files access mode and type */
-	short		va_nlink;	/* number of references to file */
-	vuid_t		va_uid;		/* owner user id */
-	vgid_t		va_gid;		/* owner group id */
-	long		va_fileid;	/* file id */
-	u_quad_t	va_size;	/* file size in bytes */
-	long		va_blocksize;	/* blocksize preferred for i/o */
-	struct timespec	va_atime;	/* time of last access */
-	struct timespec	va_mtime;	/* time of last modification */
-	struct timespec	va_ctime;	/* time file changed */
-	u_long		va_gen;		/* generation number of file */
-	u_long		va_flags;	/* flags defined for file */
-	cdev_t	        va_rdev;	/* device special file represents */
-	u_quad_t	va_bytes;	/* bytes of disk space held by file */
-	u_quad_t	va_filerev;	/* file modification number */
-};
-
+#include <uapi/linux/coda.h>
 #endif 
-
-/* structure used by CODA_STATFS for getting cache information from venus */
-struct coda_statfs {
-    int32_t f_blocks;
-    int32_t f_bfree;
-    int32_t f_bavail;
-    int32_t f_files;
-    int32_t f_ffree;
-};
-
-/*
- * Kernel <--> Venus communications.
- */
-
-#define CODA_ROOT	2
-#define CODA_OPEN_BY_FD	3
-#define CODA_OPEN	4
-#define CODA_CLOSE	5
-#define CODA_IOCTL	6
-#define CODA_GETATTR	7
-#define CODA_SETATTR	8
-#define CODA_ACCESS	9
-#define CODA_LOOKUP	10
-#define CODA_CREATE	11
-#define CODA_REMOVE	12
-#define CODA_LINK	13
-#define CODA_RENAME	14
-#define CODA_MKDIR	15
-#define CODA_RMDIR	16
-#define CODA_SYMLINK	18
-#define CODA_READLINK	19
-#define CODA_FSYNC	20
-#define CODA_VGET	22
-#define CODA_SIGNAL	23
-#define CODA_REPLACE	 24 /* DOWNCALL */
-#define CODA_FLUSH       25 /* DOWNCALL */
-#define CODA_PURGEUSER   26 /* DOWNCALL */
-#define CODA_ZAPFILE     27 /* DOWNCALL */
-#define CODA_ZAPDIR      28 /* DOWNCALL */
-#define CODA_PURGEFID    30 /* DOWNCALL */
-#define CODA_OPEN_BY_PATH 31
-#define CODA_RESOLVE     32
-#define CODA_REINTEGRATE 33
-#define CODA_STATFS	 34
-#define CODA_STORE	 35
-#define CODA_RELEASE	 36
-#define CODA_NCALLS 37
-
-#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
-
-#define VC_MAXDATASIZE	    8192
-#define VC_MAXMSGSIZE      sizeof(union inputArgs)+sizeof(union outputArgs) +\
-                            VC_MAXDATASIZE  
-
-#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
-
-#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
-
-/*
- *        Venus <-> Coda  RPC arguments
- */
-struct coda_in_hdr {
-    u_int32_t opcode;
-    u_int32_t unique;	    /* Keep multiple outstanding msgs distinct */
-    pid_t pid;
-    pid_t pgid;
-    vuid_t uid;
-};
-
-/* Really important that opcode and unique are 1st two fields! */
-struct coda_out_hdr {
-    u_int32_t opcode;
-    u_int32_t unique;	
-    u_int32_t result;
-};
-
-/* coda_root: NO_IN */
-struct coda_root_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-};
-
-struct coda_root_in {
-    struct coda_in_hdr in;
-};
-
-/* coda_open: */
-struct coda_open_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_open_out {
-    struct coda_out_hdr oh;
-    cdev_t	dev;
-    ino_t	inode;
-};
-
-
-/* coda_store: */
-struct coda_store_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_store_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_release: */
-struct coda_release_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_release_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_close: */
-struct coda_close_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_close_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_ioctl: */
-struct coda_ioctl_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	cmd;
-    int	len;
-    int	rwflag;
-    char *data;			/* Place holder for data. */
-};
-
-struct coda_ioctl_out {
-    struct coda_out_hdr oh;
-    int	len;
-    caddr_t	data;		/* Place holder for data. */
-};
-
-
-/* coda_getattr: */
-struct coda_getattr_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_getattr_out {
-    struct coda_out_hdr oh;
-    struct coda_vattr attr;
-};
-
-
-/* coda_setattr: NO_OUT */
-struct coda_setattr_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-};
-
-struct coda_setattr_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_access: NO_OUT */
-struct coda_access_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_access_out {
-    struct coda_out_hdr out;
-};
-
-
-/* lookup flags */
-#define CLU_CASE_SENSITIVE     0x01
-#define CLU_CASE_INSENSITIVE   0x02
-
-/* coda_lookup: */
-struct  coda_lookup_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int         name;		/* Place holder for data. */
-    int         flags;	
-};
-
-struct coda_lookup_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    int	vtype;
-};
-
-
-/* coda_create: */
-struct coda_create_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-    int excl;
-    int mode;
-    int 	name;		/* Place holder for data. */
-};
-
-struct coda_create_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-};
-
-
-/* coda_remove: NO_OUT */
-struct coda_remove_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int name;		/* Place holder for data. */
-};
-
-struct coda_remove_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_link: NO_OUT */
-struct coda_link_in {
-    struct coda_in_hdr ih;
-    struct CodaFid sourceFid;	/* cnode to link *to* */
-    struct CodaFid destFid;	/* Directory in which to place link */
-    int tname;		/* Place holder for data. */
-};
-
-struct coda_link_out {
-    struct coda_out_hdr out;
-};
-
-
-/* coda_rename: NO_OUT */
-struct coda_rename_in {
-    struct coda_in_hdr ih;
-    struct CodaFid sourceFid;
-    int 	srcname;
-    struct CodaFid destFid;
-    int 	destname;
-};
-
-struct coda_rename_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_mkdir: */
-struct coda_mkdir_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-    int	   name;		/* Place holder for data. */
-};
-
-struct coda_mkdir_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    struct coda_vattr attr;
-};
-
-
-/* coda_rmdir: NO_OUT */
-struct coda_rmdir_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int name;		/* Place holder for data. */
-};
-
-struct coda_rmdir_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_symlink: NO_OUT */
-struct coda_symlink_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;	/* Directory to put symlink in */
-    int srcname;
-    struct coda_vattr attr;
-    int tname;
-};
-
-struct coda_symlink_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_readlink: */
-struct coda_readlink_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_readlink_out {
-    struct coda_out_hdr oh;
-    int	count;
-    caddr_t	data;		/* Place holder for data. */
-};
-
-
-/* coda_fsync: NO_OUT */
-struct coda_fsync_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_fsync_out {
-    struct coda_out_hdr out;
-};
-
-/* coda_vget: */
-struct coda_vget_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-};
-
-struct coda_vget_out {
-    struct coda_out_hdr oh;
-    struct CodaFid VFid;
-    int	vtype;
-};
-
-
-/* CODA_SIGNAL is out-of-band, doesn't need data. */
-/* CODA_INVALIDATE is a venus->kernel call */
-/* CODA_FLUSH is a venus->kernel call */
-
-/* coda_purgeuser: */
-/* CODA_PURGEUSER is a venus->kernel call */
-struct coda_purgeuser_out {
-    struct coda_out_hdr oh;
-    vuid_t uid;
-};
-
-/* coda_zapfile: */
-/* CODA_ZAPFILE is a venus->kernel call */
-struct coda_zapfile_out {  
-    struct coda_out_hdr oh;
-    struct CodaFid CodaFid;
-};
-
-/* coda_zapdir: */
-/* CODA_ZAPDIR is a venus->kernel call */	
-struct coda_zapdir_out {	  
-    struct coda_out_hdr oh;
-    struct CodaFid CodaFid;
-};
-
-/* coda_purgefid: */
-/* CODA_PURGEFID is a venus->kernel call */	
-struct coda_purgefid_out { 
-    struct coda_out_hdr oh;
-    struct CodaFid CodaFid;
-};
-
-/* coda_replace: */
-/* CODA_REPLACE is a venus->kernel call */	
-struct coda_replace_out { /* coda_replace is a venus->kernel call */
-    struct coda_out_hdr oh;
-    struct CodaFid NewFid;
-    struct CodaFid OldFid;
-};
-
-/* coda_open_by_fd: */
-struct coda_open_by_fd_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int        flags;
-};
-
-struct coda_open_by_fd_out {
-    struct coda_out_hdr oh;
-    int fd;
-
-#ifdef __KERNEL__
-    struct file *fh; /* not passed from userspace but used in-kernel only */
-#endif
-};
-
-/* coda_open_by_path: */
-struct coda_open_by_path_in {
-    struct coda_in_hdr ih;
-    struct CodaFid VFid;
-    int	flags;
-};
-
-struct coda_open_by_path_out {
-    struct coda_out_hdr oh;
-	int path;
-};
-
-/* coda_statfs: NO_IN */
-struct coda_statfs_in {
-    struct coda_in_hdr in;
-};
-
-struct coda_statfs_out {
-    struct coda_out_hdr oh;
-    struct coda_statfs stat;
-};
-
-/* 
- * Occasionally, we don't cache the fid returned by CODA_LOOKUP. 
- * For instance, if the fid is inconsistent. 
- * This case is handled by setting the top bit of the type result parameter.
- */
-#define CODA_NOCACHE          0x80000000
-
-union inputArgs {
-    struct coda_in_hdr ih;		/* NB: every struct below begins with an ih */
-    struct coda_open_in coda_open;
-    struct coda_store_in coda_store;
-    struct coda_release_in coda_release;
-    struct coda_close_in coda_close;
-    struct coda_ioctl_in coda_ioctl;
-    struct coda_getattr_in coda_getattr;
-    struct coda_setattr_in coda_setattr;
-    struct coda_access_in coda_access;
-    struct coda_lookup_in coda_lookup;
-    struct coda_create_in coda_create;
-    struct coda_remove_in coda_remove;
-    struct coda_link_in coda_link;
-    struct coda_rename_in coda_rename;
-    struct coda_mkdir_in coda_mkdir;
-    struct coda_rmdir_in coda_rmdir;
-    struct coda_symlink_in coda_symlink;
-    struct coda_readlink_in coda_readlink;
-    struct coda_fsync_in coda_fsync;
-    struct coda_vget_in coda_vget;
-    struct coda_open_by_fd_in coda_open_by_fd;
-    struct coda_open_by_path_in coda_open_by_path;
-    struct coda_statfs_in coda_statfs;
-};
-
-union outputArgs {
-    struct coda_out_hdr oh;		/* NB: every struct below begins with an oh */
-    struct coda_root_out coda_root;
-    struct coda_open_out coda_open;
-    struct coda_ioctl_out coda_ioctl;
-    struct coda_getattr_out coda_getattr;
-    struct coda_lookup_out coda_lookup;
-    struct coda_create_out coda_create;
-    struct coda_mkdir_out coda_mkdir;
-    struct coda_readlink_out coda_readlink;
-    struct coda_vget_out coda_vget;
-    struct coda_purgeuser_out coda_purgeuser;
-    struct coda_zapfile_out coda_zapfile;
-    struct coda_zapdir_out coda_zapdir;
-    struct coda_purgefid_out coda_purgefid;
-    struct coda_replace_out coda_replace;
-    struct coda_open_by_fd_out coda_open_by_fd;
-    struct coda_open_by_path_out coda_open_by_path;
-    struct coda_statfs_out coda_statfs;
-};    
-
-union coda_downcalls {
-    /* CODA_INVALIDATE is a venus->kernel call */
-    /* CODA_FLUSH is a venus->kernel call */
-    struct coda_purgeuser_out purgeuser;
-    struct coda_zapfile_out zapfile;
-    struct coda_zapdir_out zapdir;
-    struct coda_purgefid_out purgefid;
-    struct coda_replace_out replace;
-};
-
-
-/*
- * Used for identifying usage of "Control" and pioctls
- */
-
-#define PIOCPARM_MASK 0x0000ffff
-struct ViceIoctl {
-        void __user *in;        /* Data to be transferred in */
-        void __user *out;       /* Data to be transferred out */
-        u_short in_size;        /* Size of input buffer <= 2K */
-        u_short out_size;       /* Maximum size of output buffer, <= 2K */
-};
-
-struct PioctlData {
-        const char __user *path;
-        int follow;
-        struct ViceIoctl vi;
-};
-
-#define CODA_CONTROL		".CONTROL"
-#define CODA_CONTROLLEN		8
-#define CTL_INO			-1
-
-/* Data passed to mount */
-
-#define CODA_MOUNT_VERSION 1
-
-struct coda_mount_data {
-	int		version;
-	int		fd;       /* Opened device */
-};
-
-#endif 
-
diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h
index 72f2d2f..8031d6e 100644
--- a/include/linux/coda_psdev.h
+++ b/include/linux/coda_psdev.h
@@ -1,14 +1,9 @@
 #ifndef __CODA_PSDEV_H
 #define __CODA_PSDEV_H
 
-#include <linux/magic.h>
-
-#define CODA_PSDEV_MAJOR 67
-#define MAX_CODADEVS  5	   /* how many do we allow */
-
-#ifdef __KERNEL__
 #include <linux/backing-dev.h>
 #include <linux/mutex.h>
+#include <uapi/linux/coda_psdev.h>
 
 struct kstatfs;
 
@@ -74,23 +69,4 @@
  */
 
 extern struct venus_comm coda_comms[];
-#endif /* __KERNEL__ */
-
-/* messages between coda filesystem in kernel and Venus */
-struct upc_req {
-	struct list_head    uc_chain;
-	caddr_t	            uc_data;
-	u_short	            uc_flags;
-	u_short             uc_inSize;  /* Size is at most 5000 bytes */
-	u_short	            uc_outSize;
-	u_short	            uc_opcode;  /* copied from data to save lookup */
-	int		    uc_unique;
-	wait_queue_head_t   uc_sleep;   /* process' wait queue */
-};
-
-#define CODA_REQ_ASYNC  0x1
-#define CODA_REQ_READ   0x2
-#define CODA_REQ_WRITE  0x4
-#define CODA_REQ_ABORT  0x8
-
 #endif
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 7638407..b2b5a41 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -18,63 +18,9 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-
 #ifndef __CONNECTOR_H
 #define __CONNECTOR_H
 
-#include <linux/types.h>
-
-/*
- * Process Events connector unique ids -- used for message routing
- */
-#define CN_IDX_PROC			0x1
-#define CN_VAL_PROC			0x1
-#define CN_IDX_CIFS			0x2
-#define CN_VAL_CIFS                     0x1
-#define CN_W1_IDX			0x3	/* w1 communication */
-#define CN_W1_VAL			0x1
-#define CN_IDX_V86D			0x4
-#define CN_VAL_V86D_UVESAFB		0x1
-#define CN_IDX_BB			0x5	/* BlackBoard, from the TSP GPL sampling framework */
-#define CN_DST_IDX			0x6
-#define CN_DST_VAL			0x1
-#define CN_IDX_DM			0x7	/* Device Mapper */
-#define CN_VAL_DM_USERSPACE_LOG		0x1
-#define CN_IDX_DRBD			0x8
-#define CN_VAL_DRBD			0x1
-#define CN_KVP_IDX			0x9	/* HyperV KVP */
-#define CN_KVP_VAL			0x1	/* queries from the kernel */
-
-#define CN_NETLINK_USERS		10	/* Highest index + 1 */
-
-/*
- * Maximum connector's message size.
- */
-#define CONNECTOR_MAX_MSG_SIZE		16384
-
-/*
- * idx and val are unique identifiers which 
- * are used for message routing and 
- * must be registered in connector.h for in-kernel usage.
- */
-
-struct cb_id {
-	__u32 idx;
-	__u32 val;
-};
-
-struct cn_msg {
-	struct cb_id id;
-
-	__u32 seq;
-	__u32 ack;
-
-	__u16 len;		/* Length of the following data */
-	__u16 flags;
-	__u8 data[0];
-};
-
-#ifdef __KERNEL__
 
 #include <linux/atomic.h>
 
@@ -82,6 +28,7 @@
 #include <linux/workqueue.h>
 
 #include <net/sock.h>
+#include <uapi/linux/connector.h>
 
 #define CN_CBQ_NAMELEN		32
 
@@ -137,5 +84,4 @@
 
 int cn_cb_equal(struct cb_id *, struct cb_id *);
 
-#endif				/* __KERNEL__ */
 #endif				/* __CONNECTOR_H */
diff --git a/include/linux/console.h b/include/linux/console.h
index 7201ce4..dedb082 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -83,8 +83,14 @@
 int con_debug_enter(struct vc_data *vc);
 int con_debug_leave(void);
 #else
-#define con_debug_enter(vc) (0)
-#define con_debug_leave() (0)
+static inline int con_debug_enter(struct vc_data *vc)
+{
+	return 0;
+}
+static inline int con_debug_leave(void)
+{
+	return 0;
+}
 #endif
 
 /* scroll */
diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h
new file mode 100644
index 0000000..8515301
--- /dev/null
+++ b/include/linux/cpu_cooling.h
@@ -0,0 +1,58 @@
+/*
+ *  linux/include/linux/cpu_cooling.h
+ *
+ *  Copyright (C) 2012	Samsung Electronics Co., Ltd(http://www.samsung.com)
+ *  Copyright (C) 2012  Amit Daniel <amit.kachhap@linaro.org>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef __CPU_COOLING_H__
+#define __CPU_COOLING_H__
+
+#include <linux/thermal.h>
+
+#define CPUFREQ_COOLING_START		0
+#define CPUFREQ_COOLING_STOP		1
+
+#ifdef CONFIG_CPU_THERMAL
+/**
+ * cpufreq_cooling_register - function to create cpufreq cooling device.
+ * @clip_cpus: cpumask of cpus where the frequency constraints will happen
+ */
+struct thermal_cooling_device *cpufreq_cooling_register(
+		struct cpumask *clip_cpus);
+
+/**
+ * cpufreq_cooling_unregister - function to remove cpufreq cooling device.
+ * @cdev: thermal cooling device pointer.
+ */
+void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev);
+#else /* !CONFIG_CPU_THERMAL */
+static inline struct thermal_cooling_device *cpufreq_cooling_register(
+	struct cpumask *clip_cpus)
+{
+	return NULL;
+}
+static inline void cpufreq_cooling_unregister(
+		struct thermal_cooling_device *cdev)
+{
+	return;
+}
+#endif	/* CONFIG_CPU_THERMAL */
+
+#endif /* __CPU_COOLING_H__ */
diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h
index 0e7bf27..1337896 100644
--- a/include/linux/cramfs_fs.h
+++ b/include/linux/cramfs_fs.h
@@ -1,94 +1,10 @@
 #ifndef __CRAMFS_H
 #define __CRAMFS_H
 
-#include <linux/types.h>
-#include <linux/magic.h>
+#include <uapi/linux/cramfs_fs.h>
 
-#define CRAMFS_SIGNATURE	"Compressed ROMFS"
-
-/*
- * Width of various bitfields in struct cramfs_inode.
- * Primarily used to generate warnings in mkcramfs.
- */
-#define CRAMFS_MODE_WIDTH 16
-#define CRAMFS_UID_WIDTH 16
-#define CRAMFS_SIZE_WIDTH 24
-#define CRAMFS_GID_WIDTH 8
-#define CRAMFS_NAMELEN_WIDTH 6
-#define CRAMFS_OFFSET_WIDTH 26
-
-/*
- * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
- * path length is 63 << 2 = 252.
- */
-#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2)
-
-/*
- * Reasonably terse representation of the inode data.
- */
-struct cramfs_inode {
-	__u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
-	/* SIZE for device files is i_rdev */
-	__u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
-	/* NAMELEN is the length of the file name, divided by 4 and
-           rounded up.  (cramfs doesn't support hard links.) */
-	/* OFFSET: For symlinks and non-empty regular files, this
-	   contains the offset (divided by 4) of the file data in
-	   compressed form (starting with an array of block pointers;
-	   see README).  For non-empty directories it is the offset
-	   (divided by 4) of the inode of the first file in that
-	   directory.  For anything else, offset is zero. */
-	__u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH;
-};
-
-struct cramfs_info {
-	__u32 crc;
-	__u32 edition;
-	__u32 blocks;
-	__u32 files;
-};
-
-/*
- * Superblock information at the beginning of the FS.
- */
-struct cramfs_super {
-	__u32 magic;			/* 0x28cd3d45 - random number */
-	__u32 size;			/* length in bytes */
-	__u32 flags;			/* feature flags */
-	__u32 future;			/* reserved for future use */
-	__u8 signature[16];		/* "Compressed ROMFS" */
-	struct cramfs_info fsid;	/* unique filesystem info */
-	__u8 name[16];			/* user-defined name */
-	struct cramfs_inode root;	/* root inode data */
-};
-
-/*
- * Feature flags
- *
- * 0x00000000 - 0x000000ff: features that work for all past kernels
- * 0x00000100 - 0xffffffff: features that don't work for past kernels
- */
-#define CRAMFS_FLAG_FSID_VERSION_2	0x00000001	/* fsid version #2 */
-#define CRAMFS_FLAG_SORTED_DIRS		0x00000002	/* sorted dirs */
-#define CRAMFS_FLAG_HOLES		0x00000100	/* support for holes */
-#define CRAMFS_FLAG_WRONG_SIGNATURE	0x00000200	/* reserved */
-#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET	0x00000400	/* shifted root fs */
-
-/*
- * Valid values in super.flags.  Currently we refuse to mount
- * if (flags & ~CRAMFS_SUPPORTED_FLAGS).  Maybe that should be
- * changed to test super.future instead.
- */
-#define CRAMFS_SUPPORTED_FLAGS	( 0x000000ff \
-				| CRAMFS_FLAG_HOLES \
-				| CRAMFS_FLAG_WRONG_SIGNATURE \
-				| CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
-
-#ifdef __KERNEL__
 /* Uncompression interfaces to the underlying zlib */
 int cramfs_uncompress_block(void *dst, int dstlen, void *src, int srclen);
 int cramfs_uncompress_init(void);
 void cramfs_uncompress_exit(void);
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/cuda.h b/include/linux/cuda.h
index 9f9865f..b723328 100644
--- a/include/linux/cuda.h
+++ b/include/linux/cuda.h
@@ -4,38 +4,15 @@
  *
  * Copyright (C) 1996 Paul Mackerras.
  */
-
 #ifndef _LINUX_CUDA_H
 #define _LINUX_CUDA_H
 
-/* CUDA commands (2nd byte) */
-#define CUDA_WARM_START		0
-#define CUDA_AUTOPOLL		1
-#define CUDA_GET_6805_ADDR	2
-#define CUDA_GET_TIME		3
-#define CUDA_GET_PRAM		7
-#define CUDA_SET_6805_ADDR	8
-#define CUDA_SET_TIME		9
-#define CUDA_POWERDOWN		0xa
-#define CUDA_POWERUP_TIME	0xb
-#define CUDA_SET_PRAM		0xc
-#define CUDA_MS_RESET		0xd
-#define CUDA_SEND_DFAC		0xe
-#define CUDA_RESET_SYSTEM	0x11
-#define CUDA_SET_IPL		0x12
-#define CUDA_SET_AUTO_RATE	0x14
-#define CUDA_GET_AUTO_RATE	0x16
-#define CUDA_SET_DEVICE_LIST	0x19
-#define CUDA_GET_DEVICE_LIST	0x1a
-#define CUDA_GET_SET_IIC	0x22
+#include <uapi/linux/cuda.h>
 
-#ifdef __KERNEL__
 
 extern int find_via_cuda(void);
 extern int cuda_request(struct adb_request *req,
 			void (*done)(struct adb_request *), int nbytes, ...);
 extern void cuda_poll(void);
 
-#endif	/* __KERNEL */
-
 #endif /* _LINUX_CUDA_H */
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index a5049ea..19ae518 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -63,434 +63,11 @@
  *
  *
  */
-
 #ifndef _LINUX_CYCLADES_H
 #define _LINUX_CYCLADES_H
 
-#include <linux/types.h>
-
-struct cyclades_monitor {
-        unsigned long           int_count;
-        unsigned long           char_count;
-        unsigned long           char_max;
-        unsigned long           char_last;
-};
-
-/*
- * These stats all reflect activity since the device was last initialized.
- * (i.e., since the port was opened with no other processes already having it
- * open)
- */
-struct cyclades_idle_stats {
-    __kernel_time_t in_use;	/* Time device has been in use (secs) */
-    __kernel_time_t recv_idle;	/* Time since last char received (secs) */
-    __kernel_time_t xmit_idle;	/* Time since last char transmitted (secs) */
-    unsigned long  recv_bytes;	/* Bytes received */
-    unsigned long  xmit_bytes;	/* Bytes transmitted */
-    unsigned long  overruns;	/* Input overruns */
-    unsigned long  frame_errs;	/* Input framing errors */
-    unsigned long  parity_errs;	/* Input parity errors */
-};
-
-#define CYCLADES_MAGIC  0x4359
-
-#define CYGETMON                0x435901
-#define CYGETTHRESH             0x435902
-#define CYSETTHRESH             0x435903
-#define CYGETDEFTHRESH          0x435904
-#define CYSETDEFTHRESH          0x435905
-#define CYGETTIMEOUT            0x435906
-#define CYSETTIMEOUT            0x435907
-#define CYGETDEFTIMEOUT         0x435908
-#define CYSETDEFTIMEOUT         0x435909
-#define CYSETRFLOW		0x43590a
-#define CYGETRFLOW		0x43590b
-#define CYSETRTSDTR_INV		0x43590c
-#define CYGETRTSDTR_INV		0x43590d
-#define CYZSETPOLLCYCLE		0x43590e
-#define CYZGETPOLLCYCLE		0x43590f
-#define CYGETCD1400VER		0x435910
-#define	CYSETWAIT		0x435912
-#define	CYGETWAIT		0x435913
-
-/*************** CYCLOM-Z ADDITIONS ***************/
-
-#define CZIOC           ('M' << 8)
-#define CZ_NBOARDS      (CZIOC|0xfa)
-#define CZ_BOOT_START   (CZIOC|0xfb)
-#define CZ_BOOT_DATA    (CZIOC|0xfc)
-#define CZ_BOOT_END     (CZIOC|0xfd)
-#define CZ_TEST         (CZIOC|0xfe)
-
-#define CZ_DEF_POLL	(HZ/25)
-
-#define MAX_BOARD       4       /* Max number of boards */
-#define MAX_DEV         256     /* Max number of ports total */
-#define	CYZ_MAX_SPEED	921600
-
-#define	CYZ_FIFO_SIZE	16
-
-#define CYZ_BOOT_NWORDS 0x100
-struct CYZ_BOOT_CTRL {
-        unsigned short  nboard;
-        int             status[MAX_BOARD];
-        int             nchannel[MAX_BOARD];
-        int             fw_rev[MAX_BOARD];
-        unsigned long   offset;
-        unsigned long   data[CYZ_BOOT_NWORDS];
-};
-
-
-#ifndef DP_WINDOW_SIZE
-/*
- *	Memory Window Sizes
- */
-
-#define	DP_WINDOW_SIZE		(0x00080000)	/* window size 512 Kb */
-#define	ZE_DP_WINDOW_SIZE	(0x00100000)	/* window size 1 Mb (Ze and
-						  8Zo V.2 */
-#define	CTRL_WINDOW_SIZE	(0x00000080)	/* runtime regs 128 bytes */
-
-/*
- *	CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
- *	normally will access only interested on the fpga_id, fpga_version,
- *	start_cpu and stop_cpu.
- */
-
-struct	CUSTOM_REG {
-	__u32	fpga_id;		/* FPGA Identification Register */
-	__u32	fpga_version;		/* FPGA Version Number Register */
-	__u32	cpu_start;		/* CPU start Register (write) */
-	__u32	cpu_stop;		/* CPU stop Register (write) */
-	__u32	misc_reg;		/* Miscellaneous Register */
-	__u32	idt_mode;		/* IDT mode Register */
-	__u32	uart_irq_status;	/* UART IRQ status Register */
-	__u32	clear_timer0_irq;	/* Clear timer interrupt Register */
-	__u32	clear_timer1_irq;	/* Clear timer interrupt Register */
-	__u32	clear_timer2_irq;	/* Clear timer interrupt Register */
-	__u32	test_register;		/* Test Register */
-	__u32	test_count;		/* Test Count Register */
-	__u32	timer_select;		/* Timer select register */
-	__u32	pr_uart_irq_status;	/* Prioritized UART IRQ stat Reg */
-	__u32	ram_wait_state;		/* RAM wait-state Register */
-	__u32	uart_wait_state;	/* UART wait-state Register */
-	__u32	timer_wait_state;	/* timer wait-state Register */
-	__u32	ack_wait_state;		/* ACK wait State Register */
-};
-
-/*
- *	RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
- *	registers. This structure can be used to access the 9060 registers
- *	(memory mapped).
- */
-
-struct RUNTIME_9060 {
-	__u32	loc_addr_range;	/* 00h - Local Address Range */
-	__u32	loc_addr_base;	/* 04h - Local Address Base */
-	__u32	loc_arbitr;	/* 08h - Local Arbitration */
-	__u32	endian_descr;	/* 0Ch - Big/Little Endian Descriptor */
-	__u32	loc_rom_range;	/* 10h - Local ROM Range */
-	__u32	loc_rom_base;	/* 14h - Local ROM Base */
-	__u32	loc_bus_descr;	/* 18h - Local Bus descriptor */
-	__u32	loc_range_mst;	/* 1Ch - Local Range for Master to PCI */
-	__u32	loc_base_mst;	/* 20h - Local Base for Master PCI */
-	__u32	loc_range_io;	/* 24h - Local Range for Master IO */
-	__u32	pci_base_mst;	/* 28h - PCI Base for Master PCI */
-	__u32	pci_conf_io;	/* 2Ch - PCI configuration for Master IO */
-	__u32	filler1;	/* 30h */
-	__u32	filler2;	/* 34h */
-	__u32	filler3;	/* 38h */
-	__u32	filler4;	/* 3Ch */
-	__u32	mail_box_0;	/* 40h - Mail Box 0 */
-	__u32	mail_box_1;	/* 44h - Mail Box 1 */
-	__u32	mail_box_2;	/* 48h - Mail Box 2 */
-	__u32	mail_box_3;	/* 4Ch - Mail Box 3 */
-	__u32	filler5;	/* 50h */
-	__u32	filler6;	/* 54h */
-	__u32	filler7;	/* 58h */
-	__u32	filler8;	/* 5Ch */
-	__u32	pci_doorbell;	/* 60h - PCI to Local Doorbell */
-	__u32	loc_doorbell;	/* 64h - Local to PCI Doorbell */
-	__u32	intr_ctrl_stat;	/* 68h - Interrupt Control/Status */
-	__u32	init_ctrl;	/* 6Ch - EEPROM control, Init Control, etc */
-};
-
-/* Values for the Local Base Address re-map register */
-
-#define	WIN_RAM		0x00000001L	/* set the sliding window to RAM */
-#define	WIN_CREG	0x14000001L	/* set the window to custom Registers */
-
-/* Values timer select registers */
-
-#define	TIMER_BY_1M	0x00		/* clock divided by 1M */
-#define	TIMER_BY_256K	0x01		/* clock divided by 256k */
-#define	TIMER_BY_128K	0x02		/* clock divided by 128k */
-#define	TIMER_BY_32K	0x03		/* clock divided by 32k */
-
-/****************** ****************** *******************/
-#endif
-
-#ifndef ZFIRM_ID
-/* #include "zfwint.h" */
-/****************** ****************** *******************/
-/*
- *	This file contains the definitions for interfacing with the
- *	Cyclom-Z ZFIRM Firmware.
- */
-
-/* General Constant definitions */
-
-#define	MAX_CHAN	64		/* max number of channels per board */
-
-/* firmware id structure (set after boot) */
-
-#define ID_ADDRESS	0x00000180L	/* signature/pointer address */
-#define	ZFIRM_ID	0x5557465AL	/* ZFIRM/U signature */
-#define	ZFIRM_HLT	0x59505B5CL	/* ZFIRM needs external power supply */
-#define	ZFIRM_RST	0x56040674L	/* RST signal (due to FW reset) */
-
-#define	ZF_TINACT_DEF	1000		/* default inactivity timeout 
-					   (1000 ms) */
-#define	ZF_TINACT	ZF_TINACT_DEF
-
-struct	FIRM_ID {
-	__u32	signature;		/* ZFIRM/U signature */
-	__u32	zfwctrl_addr;		/* pointer to ZFW_CTRL structure */
-};
-
-/* Op. System id */
-
-#define	C_OS_LINUX	0x00000030	/* generic Linux system */
-
-/* channel op_mode */
-
-#define	C_CH_DISABLE	0x00000000	/* channel is disabled */
-#define	C_CH_TXENABLE	0x00000001	/* channel Tx enabled */
-#define	C_CH_RXENABLE	0x00000002	/* channel Rx enabled */
-#define	C_CH_ENABLE	0x00000003	/* channel Tx/Rx enabled */
-#define	C_CH_LOOPBACK	0x00000004	/* Loopback mode */
-
-/* comm_parity - parity */
-
-#define	C_PR_NONE	0x00000000	/* None */
-#define	C_PR_ODD	0x00000001	/* Odd */
-#define C_PR_EVEN	0x00000002	/* Even */
-#define C_PR_MARK	0x00000004	/* Mark */
-#define C_PR_SPACE	0x00000008	/* Space */
-#define C_PR_PARITY	0x000000ff
-
-#define	C_PR_DISCARD	0x00000100	/* discard char with frame/par error */
-#define C_PR_IGNORE	0x00000200	/* ignore frame/par error */
-
-/* comm_data_l - data length and stop bits */
-
-#define C_DL_CS5	0x00000001
-#define C_DL_CS6	0x00000002
-#define C_DL_CS7	0x00000004
-#define C_DL_CS8	0x00000008
-#define	C_DL_CS		0x0000000f
-#define C_DL_1STOP	0x00000010
-#define C_DL_15STOP	0x00000020
-#define C_DL_2STOP	0x00000040
-#define	C_DL_STOP	0x000000f0
-
-/* interrupt enabling/status */
-
-#define	C_IN_DISABLE	0x00000000	/* zero, disable interrupts */
-#define	C_IN_TXBEMPTY	0x00000001	/* tx buffer empty */
-#define	C_IN_TXLOWWM	0x00000002	/* tx buffer below LWM */
-#define	C_IN_RXHIWM	0x00000010	/* rx buffer above HWM */
-#define	C_IN_RXNNDT	0x00000020	/* rx no new data timeout */
-#define	C_IN_MDCD	0x00000100	/* modem DCD change */
-#define	C_IN_MDSR	0x00000200	/* modem DSR change */
-#define	C_IN_MRI	0x00000400	/* modem RI change */
-#define	C_IN_MCTS	0x00000800	/* modem CTS change */
-#define	C_IN_RXBRK	0x00001000	/* Break received */
-#define	C_IN_PR_ERROR	0x00002000	/* parity error */
-#define	C_IN_FR_ERROR	0x00004000	/* frame error */
-#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
-#define C_IN_RXOFL	0x00010000      /* RX buffer overflow */
-#define C_IN_IOCTLW	0x00020000      /* I/O control w/ wait */
-#define C_IN_MRTS	0x00040000	/* modem RTS drop */
-#define C_IN_ICHAR	0x00080000
- 
-/* flow control */
-
-#define	C_FL_OXX	0x00000001	/* output Xon/Xoff flow control */
-#define	C_FL_IXX	0x00000002	/* output Xon/Xoff flow control */
-#define C_FL_OIXANY	0x00000004	/* output Xon/Xoff (any xon) */
-#define	C_FL_SWFLOW	0x0000000f
-
-/* flow status */
-
-#define	C_FS_TXIDLE	0x00000000	/* no Tx data in the buffer or UART */
-#define	C_FS_SENDING	0x00000001	/* UART is sending data */
-#define	C_FS_SWFLOW	0x00000002	/* Tx is stopped by received Xoff */
-
-/* rs_control/rs_status RS-232 signals */
-
-#define C_RS_PARAM	0x80000000	/* Indicates presence of parameter in 
-					   IOCTLM command */
-#define	C_RS_RTS	0x00000001	/* RTS */
-#define	C_RS_DTR	0x00000004	/* DTR */
-#define	C_RS_DCD	0x00000100	/* CD */
-#define	C_RS_DSR	0x00000200	/* DSR */
-#define	C_RS_RI		0x00000400	/* RI */
-#define	C_RS_CTS	0x00000800	/* CTS */
-
-/* commands Host <-> Board */
-
-#define	C_CM_RESET	0x01		/* reset/flush buffers */
-#define	C_CM_IOCTL	0x02		/* re-read CH_CTRL */
-#define	C_CM_IOCTLW	0x03		/* re-read CH_CTRL, intr when done */
-#define	C_CM_IOCTLM	0x04		/* RS-232 outputs change */
-#define	C_CM_SENDXOFF	0x10		/* send Xoff */
-#define	C_CM_SENDXON	0x11		/* send Xon */
-#define C_CM_CLFLOW	0x12		/* Clear flow control (resume) */
-#define	C_CM_SENDBRK	0x41		/* send break */
-#define	C_CM_INTBACK	0x42		/* Interrupt back */
-#define	C_CM_SET_BREAK	0x43		/* Tx break on */
-#define	C_CM_CLR_BREAK	0x44		/* Tx break off */
-#define	C_CM_CMD_DONE	0x45		/* Previous command done */
-#define C_CM_INTBACK2	0x46		/* Alternate Interrupt back */
-#define	C_CM_TINACT	0x51		/* set inactivity detection */
-#define	C_CM_IRQ_ENBL	0x52		/* enable generation of interrupts */
-#define	C_CM_IRQ_DSBL	0x53		/* disable generation of interrupts */
-#define	C_CM_ACK_ENBL	0x54		/* enable acknowledged interrupt mode */
-#define	C_CM_ACK_DSBL	0x55		/* disable acknowledged intr mode */
-#define	C_CM_FLUSH_RX	0x56		/* flushes Rx buffer */
-#define	C_CM_FLUSH_TX	0x57		/* flushes Tx buffer */
-#define C_CM_Q_ENABLE	0x58		/* enables queue access from the 
-					   driver */
-#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
-					   driver */
-
-#define	C_CM_TXBEMPTY	0x60		/* Tx buffer is empty */
-#define	C_CM_TXLOWWM	0x61		/* Tx buffer low water mark */
-#define	C_CM_RXHIWM	0x62		/* Rx buffer high water mark */
-#define	C_CM_RXNNDT	0x63		/* rx no new data timeout */
-#define	C_CM_TXFEMPTY	0x64
-#define	C_CM_ICHAR	0x65
-#define	C_CM_MDCD	0x70		/* modem DCD change */
-#define	C_CM_MDSR	0x71		/* modem DSR change */
-#define	C_CM_MRI	0x72		/* modem RI change */
-#define	C_CM_MCTS	0x73		/* modem CTS change */
-#define C_CM_MRTS	0x74		/* modem RTS drop */
-#define	C_CM_RXBRK	0x84		/* Break received */
-#define	C_CM_PR_ERROR	0x85		/* Parity error */
-#define	C_CM_FR_ERROR	0x86		/* Frame error */
-#define C_CM_OVR_ERROR  0x87            /* Overrun error */
-#define C_CM_RXOFL	0x88            /* RX buffer overflow */
-#define	C_CM_CMDERROR	0x90		/* command error */
-#define	C_CM_FATAL	0x91		/* fatal error */
-#define	C_CM_HW_RESET	0x92		/* reset board */
-
-/*
- *	CH_CTRL - This per port structure contains all parameters
- *	that control an specific port. It can be seen as the
- *	configuration registers of a "super-serial-controller".
- */
-
-struct CH_CTRL {
-	__u32	op_mode;	/* operation mode */
-	__u32	intr_enable;	/* interrupt masking */
-	__u32	sw_flow;	/* SW flow control */
-	__u32	flow_status;	/* output flow status */
-	__u32	comm_baud;	/* baud rate  - numerically specified */
-	__u32	comm_parity;	/* parity */
-	__u32	comm_data_l;	/* data length/stop */
-	__u32	comm_flags;	/* other flags */
-	__u32	hw_flow;	/* HW flow control */
-	__u32	rs_control;	/* RS-232 outputs */
-	__u32	rs_status;	/* RS-232 inputs */
-	__u32	flow_xon;	/* xon char */
-	__u32	flow_xoff;	/* xoff char */
-	__u32	hw_overflow;	/* hw overflow counter */
-	__u32	sw_overflow;	/* sw overflow counter */
-	__u32	comm_error;	/* frame/parity error counter */
-	__u32 ichar;
-	__u32 filler[7];
-};
-
-
-/*
- *	BUF_CTRL - This per channel structure contains
- *	all Tx and Rx buffer control for a given channel.
- */
-
-struct	BUF_CTRL	{
-	__u32	flag_dma;	/* buffers are in Host memory */
-	__u32	tx_bufaddr;	/* address of the tx buffer */
-	__u32	tx_bufsize;	/* tx buffer size */
-	__u32	tx_threshold;	/* tx low water mark */
-	__u32	tx_get;		/* tail index tx buf */
-	__u32	tx_put;		/* head index tx buf */
-	__u32	rx_bufaddr;	/* address of the rx buffer */
-	__u32	rx_bufsize;	/* rx buffer size */
-	__u32	rx_threshold;	/* rx high water mark */
-	__u32	rx_get;		/* tail index rx buf */
-	__u32	rx_put;		/* head index rx buf */
-	__u32	filler[5];	/* filler to align structures */
-};
-
-/*
- *	BOARD_CTRL - This per board structure contains all global 
- *	control fields related to the board.
- */
-
-struct BOARD_CTRL {
-
-	/* static info provided by the on-board CPU */
-	__u32	n_channel;	/* number of channels */
-	__u32	fw_version;	/* firmware version */
-
-	/* static info provided by the driver */
-	__u32	op_system;	/* op_system id */
-	__u32	dr_version;	/* driver version */
-
-	/* board control area */
-	__u32	inactivity;	/* inactivity control */
-
-	/* host to FW commands */
-	__u32	hcmd_channel;	/* channel number */
-	__u32	hcmd_param;	/* pointer to parameters */
-
-	/* FW to Host commands */
-	__u32	fwcmd_channel;	/* channel number */
-	__u32	fwcmd_param;	/* pointer to parameters */
-	__u32	zf_int_queue_addr; /* offset for INT_QUEUE structure */
-
-	/* filler so the structures are aligned */
-	__u32	filler[6];
-};
-
-/* Host Interrupt Queue */
-
-#define QUEUE_SIZE	(10*MAX_CHAN)
-
-struct	INT_QUEUE {
-	unsigned char	intr_code[QUEUE_SIZE];
-	unsigned long	channel[QUEUE_SIZE];
-	unsigned long	param[QUEUE_SIZE];
-	unsigned long	put;
-	unsigned long	get;
-};
-
-/*
- *	ZFW_CTRL - This is the data structure that includes all other
- *	data structures used by the Firmware.
- */
- 
-struct ZFW_CTRL {
-	struct BOARD_CTRL	board_ctrl;
-	struct CH_CTRL		ch_ctrl[MAX_CHAN];
-	struct BUF_CTRL		buf_ctrl[MAX_CHAN];
-};
-
-/****************** ****************** *******************/
-#endif
+#include <uapi/linux/cyclades.h>
 
-#ifdef __KERNEL__
 
 /* Per card data structure */
 struct cyclades_card {
@@ -780,5 +357,4 @@
 
 /***************************************************************************/
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_CYCLADES_H */
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index d16294e..439ff69 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -1,239 +1,6 @@
 #ifndef _LINUX_DCCP_H
 #define _LINUX_DCCP_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/**
- * struct dccp_hdr - generic part of DCCP packet header
- *
- * @dccph_sport - Relevant port on the endpoint that sent this packet
- * @dccph_dport - Relevant port on the other endpoint
- * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words
- * @dccph_ccval - Used by the HC-Sender CCID
- * @dccph_cscov - Parts of the packet that are covered by the Checksum field
- * @dccph_checksum - Internet checksum, depends on dccph_cscov
- * @dccph_x - 0 = 24 bit sequence number, 1 = 48
- * @dccph_type - packet type, see DCCP_PKT_ prefixed macros
- * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x
- */
-struct dccp_hdr {
-	__be16	dccph_sport,
-		dccph_dport;
-	__u8	dccph_doff;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	dccph_cscov:4,
-		dccph_ccval:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	dccph_ccval:4,
-		dccph_cscov:4;
-#else
-#error  "Adjust your <asm/byteorder.h> defines"
-#endif
-	__sum16	dccph_checksum;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	dccph_x:1,
-		dccph_type:4,
-		dccph_reserved:3;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	dccph_reserved:3,
-		dccph_type:4,
-		dccph_x:1;
-#else
-#error  "Adjust your <asm/byteorder.h> defines"
-#endif
-	__u8	dccph_seq2;
-	__be16	dccph_seq;
-};
-
-/**
- * struct dccp_hdr_ext - the low bits of a 48 bit seq packet
- *
- * @dccph_seq_low - low 24 bits of a 48 bit seq packet
- */
-struct dccp_hdr_ext {
-	__be32	dccph_seq_low;
-};
-
-/**
- * struct dccp_hdr_request - Connection initiation request header
- *
- * @dccph_req_service - Service to which the client app wants to connect
- */
-struct dccp_hdr_request {
-	__be32	dccph_req_service;
-};
-/**
- * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets
- *
- * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR
- * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR
- */
-struct dccp_hdr_ack_bits {
-	__be16	dccph_reserved1;
-	__be16	dccph_ack_nr_high;
-	__be32	dccph_ack_nr_low;
-};
-/**
- * struct dccp_hdr_response - Connection initiation response header
- *
- * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3)
- * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request
- */
-struct dccp_hdr_response {
-	struct dccp_hdr_ack_bits	dccph_resp_ack;
-	__be32				dccph_resp_service;
-};
-
-/**
- * struct dccp_hdr_reset - Unconditionally shut down a connection
- *
- * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6)
- * @dccph_reset_code - one of %dccp_reset_codes
- * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6
- */
-struct dccp_hdr_reset {
-	struct dccp_hdr_ack_bits	dccph_reset_ack;
-	__u8				dccph_reset_code,
-					dccph_reset_data[3];
-};
-
-enum dccp_pkt_type {
-	DCCP_PKT_REQUEST = 0,
-	DCCP_PKT_RESPONSE,
-	DCCP_PKT_DATA,
-	DCCP_PKT_ACK,
-	DCCP_PKT_DATAACK,
-	DCCP_PKT_CLOSEREQ,
-	DCCP_PKT_CLOSE,
-	DCCP_PKT_RESET,
-	DCCP_PKT_SYNC,
-	DCCP_PKT_SYNCACK,
-	DCCP_PKT_INVALID,
-};
-
-#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID
-
-static inline unsigned int dccp_packet_hdr_len(const __u8 type)
-{
-	if (type == DCCP_PKT_DATA)
-		return 0;
-	if (type == DCCP_PKT_DATAACK	||
-	    type == DCCP_PKT_ACK	||
-	    type == DCCP_PKT_SYNC	||
-	    type == DCCP_PKT_SYNCACK	||
-	    type == DCCP_PKT_CLOSE	||
-	    type == DCCP_PKT_CLOSEREQ)
-		return sizeof(struct dccp_hdr_ack_bits);
-	if (type == DCCP_PKT_REQUEST)
-		return sizeof(struct dccp_hdr_request);
-	if (type == DCCP_PKT_RESPONSE)
-		return sizeof(struct dccp_hdr_response);
-	return sizeof(struct dccp_hdr_reset);
-}
-enum dccp_reset_codes {
-	DCCP_RESET_CODE_UNSPECIFIED = 0,
-	DCCP_RESET_CODE_CLOSED,
-	DCCP_RESET_CODE_ABORTED,
-	DCCP_RESET_CODE_NO_CONNECTION,
-	DCCP_RESET_CODE_PACKET_ERROR,
-	DCCP_RESET_CODE_OPTION_ERROR,
-	DCCP_RESET_CODE_MANDATORY_ERROR,
-	DCCP_RESET_CODE_CONNECTION_REFUSED,
-	DCCP_RESET_CODE_BAD_SERVICE_CODE,
-	DCCP_RESET_CODE_TOO_BUSY,
-	DCCP_RESET_CODE_BAD_INIT_COOKIE,
-	DCCP_RESET_CODE_AGGRESSION_PENALTY,
-
-	DCCP_MAX_RESET_CODES		/* Leave at the end!  */
-};
-
-/* DCCP options */
-enum {
-	DCCPO_PADDING = 0,
-	DCCPO_MANDATORY = 1,
-	DCCPO_MIN_RESERVED = 3,
-	DCCPO_MAX_RESERVED = 31,
-	DCCPO_CHANGE_L = 32,
-	DCCPO_CONFIRM_L = 33,
-	DCCPO_CHANGE_R = 34,
-	DCCPO_CONFIRM_R = 35,
-	DCCPO_NDP_COUNT = 37,
-	DCCPO_ACK_VECTOR_0 = 38,
-	DCCPO_ACK_VECTOR_1 = 39,
-	DCCPO_TIMESTAMP = 41,
-	DCCPO_TIMESTAMP_ECHO = 42,
-	DCCPO_ELAPSED_TIME = 43,
-	DCCPO_MAX = 45,
-	DCCPO_MIN_RX_CCID_SPECIFIC = 128,	/* from sender to receiver */
-	DCCPO_MAX_RX_CCID_SPECIFIC = 191,
-	DCCPO_MIN_TX_CCID_SPECIFIC = 192,	/* from receiver to sender */
-	DCCPO_MAX_TX_CCID_SPECIFIC = 255,
-};
-/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */
-#define DCCP_SINGLE_OPT_MAXLEN	253
-
-/* DCCP CCIDS */
-enum {
-	DCCPC_CCID2 = 2,
-	DCCPC_CCID3 = 3,
-};
-
-/* DCCP features (RFC 4340 section 6.4) */
-enum dccp_feature_numbers {
-	DCCPF_RESERVED = 0,
-	DCCPF_CCID = 1,
-	DCCPF_SHORT_SEQNOS = 2,
-	DCCPF_SEQUENCE_WINDOW = 3,
-	DCCPF_ECN_INCAPABLE = 4,
-	DCCPF_ACK_RATIO = 5,
-	DCCPF_SEND_ACK_VECTOR = 6,
-	DCCPF_SEND_NDP_COUNT = 7,
-	DCCPF_MIN_CSUM_COVER = 8,
-	DCCPF_DATA_CHECKSUM = 9,
-	/* 10-127 reserved */
-	DCCPF_MIN_CCID_SPECIFIC = 128,
-	DCCPF_SEND_LEV_RATE = 192,	/* RFC 4342, sec. 8.4 */
-	DCCPF_MAX_CCID_SPECIFIC = 255,
-};
-
-/* DCCP socket control message types for cmsg */
-enum dccp_cmsg_type {
-	DCCP_SCM_PRIORITY = 1,
-	DCCP_SCM_QPOLICY_MAX = 0xFFFF,
-	/* ^-- Up to here reserved exclusively for qpolicy parameters */
-	DCCP_SCM_MAX
-};
-
-/* DCCP priorities for outgoing/queued packets */
-enum dccp_packet_dequeueing_policy {
-	DCCPQ_POLICY_SIMPLE,
-	DCCPQ_POLICY_PRIO,
-	DCCPQ_POLICY_MAX
-};
-
-/* DCCP socket options */
-#define DCCP_SOCKOPT_PACKET_SIZE	1 /* XXX deprecated, without effect */
-#define DCCP_SOCKOPT_SERVICE		2
-#define DCCP_SOCKOPT_CHANGE_L		3
-#define DCCP_SOCKOPT_CHANGE_R		4
-#define DCCP_SOCKOPT_GET_CUR_MPS	5
-#define DCCP_SOCKOPT_SERVER_TIMEWAIT	6
-#define DCCP_SOCKOPT_SEND_CSCOV		10
-#define DCCP_SOCKOPT_RECV_CSCOV		11
-#define DCCP_SOCKOPT_AVAILABLE_CCIDS	12
-#define DCCP_SOCKOPT_CCID		13
-#define DCCP_SOCKOPT_TX_CCID		14
-#define DCCP_SOCKOPT_RX_CCID		15
-#define DCCP_SOCKOPT_QPOLICY_ID		16
-#define DCCP_SOCKOPT_QPOLICY_TXQLEN	17
-#define DCCP_SOCKOPT_CCID_RX_INFO	128
-#define DCCP_SOCKOPT_CCID_TX_INFO	192
-
-/* maximum number of services provided on the same listening port */
-#define DCCP_SERVICE_LIST_MAX_LEN      32
-
-#ifdef __KERNEL__
 
 #include <linux/in.h>
 #include <linux/interrupt.h>
@@ -246,6 +13,7 @@
 #include <net/inet_sock.h>
 #include <net/inet_timewait_sock.h>
 #include <net/tcp_states.h>
+#include <uapi/linux/dccp.h>
 
 enum dccp_state {
 	DCCP_OPEN	     = TCP_ESTABLISHED,
@@ -551,6 +319,4 @@
 
 extern void dccp_syn_ack_timeout(struct sock *sk, struct request_sock *req);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_DCCP_H */
diff --git a/include/linux/dlm.h b/include/linux/dlm.h
index 5201524..1d47dcc 100644
--- a/include/linux/dlm.h
+++ b/include/linux/dlm.h
@@ -10,68 +10,11 @@
 **
 *******************************************************************************
 ******************************************************************************/
-
 #ifndef __DLM_DOT_H__
 #define __DLM_DOT_H__
 
-/*
- * Interface to Distributed Lock Manager (DLM)
- * routines and structures to use DLM lockspaces
- */
+#include <uapi/linux/dlm.h>
 
-/* Lock levels and flags are here */
-#include <linux/dlmconstants.h>
-#include <linux/types.h>
-
-typedef void dlm_lockspace_t;
-
-/*
- * Lock status block
- *
- * Use this structure to specify the contents of the lock value block.  For a
- * conversion request, this structure is used to specify the lock ID of the
- * lock.  DLM writes the status of the lock request and the lock ID assigned
- * to the request in the lock status block.
- *
- * sb_lkid: the returned lock ID.  It is set on new (non-conversion) requests.
- * It is available when dlm_lock returns.
- *
- * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules
- * shown for the DLM_LKF_VALBLK flag.
- *
- * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock,
- * it was first demoted to NL to avoid conversion deadlock.
- * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid.
- *
- * sb_status: the returned status of the lock request set prior to AST
- * execution.  Possible return values:
- *
- * 0 if lock request was successful
- * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
- * -DLM_EUNLOCK if unlock request was successful
- * -DLM_ECANCEL if a cancel completed successfully
- * -EDEADLK if a deadlock was detected
- * -ETIMEDOUT if the lock request was canceled due to a timeout
- */
-
-#define DLM_SBF_DEMOTED		0x01
-#define DLM_SBF_VALNOTVALID	0x02
-#define DLM_SBF_ALTMODE		0x04
-
-struct dlm_lksb {
-	int 	 sb_status;
-	__u32	 sb_lkid;
-	char 	 sb_flags;
-	char *	 sb_lvbptr;
-};
-
-/* dlm_new_lockspace() flags */
-
-#define DLM_LSFL_TIMEWARN	0x00000002
-#define DLM_LSFL_FS     	0x00000004
-#define DLM_LSFL_NEWEXCL     	0x00000008
-
-#ifdef __KERNEL__
 
 struct dlm_slot {
 	int nodeid; /* 1 to MAX_INT */
@@ -226,7 +169,4 @@
 	       struct dlm_lksb *lksb,
 	       void *astarg);
 
-#endif				/* __KERNEL__ */
-
 #endif				/* __DLM_DOT_H__ */
-
diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h
index 3b1cc1b..95ad387 100644
--- a/include/linux/dlm_plock.h
+++ b/include/linux/dlm_plock.h
@@ -5,50 +5,15 @@
  * modify, copy, or redistribute it subject to the terms and conditions
  * of the GNU General Public License v.2.
  */
-
 #ifndef __DLM_PLOCK_DOT_H__
 #define __DLM_PLOCK_DOT_H__
 
-#include <linux/types.h>
+#include <uapi/linux/dlm_plock.h>
 
-#define DLM_PLOCK_MISC_NAME		"dlm_plock"
-
-#define DLM_PLOCK_VERSION_MAJOR	1
-#define DLM_PLOCK_VERSION_MINOR	2
-#define DLM_PLOCK_VERSION_PATCH	0
-
-enum {
-	DLM_PLOCK_OP_LOCK = 1,
-	DLM_PLOCK_OP_UNLOCK,
-	DLM_PLOCK_OP_GET,
-};
-
-#define DLM_PLOCK_FL_CLOSE 1
-
-struct dlm_plock_info {
-	__u32 version[3];
-	__u8 optype;
-	__u8 ex;
-	__u8 wait;
-	__u8 flags;
-	__u32 pid;
-	__s32 nodeid;
-	__s32 rv;
-	__u32 fsid;
-	__u64 number;
-	__u64 start;
-	__u64 end;
-	__u64 owner;
-};
-
-#ifdef __KERNEL__
 int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
 		int cmd, struct file_lock *fl);
 int dlm_posix_unlock(dlm_lockspace_t *lockspace, u64 number, struct file *file,
 		struct file_lock *fl);
 int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file,
 		struct file_lock *fl);
-#endif /* __KERNEL__ */
-
 #endif
-
diff --git a/include/linux/edd.h b/include/linux/edd.h
index 4cbd0fe..83d4371 100644
--- a/include/linux/edd.h
+++ b/include/linux/edd.h
@@ -30,165 +30,9 @@
 #ifndef _LINUX_EDD_H
 #define _LINUX_EDD_H
 
-#include <linux/types.h>
-
-#define EDDNR 0x1e9		/* addr of number of edd_info structs at EDDBUF
-				   in boot_params - treat this as 1 byte  */
-#define EDDBUF	0xd00		/* addr of edd_info structs in boot_params */
-#define EDDMAXNR 6		/* number of edd_info structs starting at EDDBUF  */
-#define EDDEXTSIZE 8		/* change these if you muck with the structures */
-#define EDDPARMSIZE 74
-#define CHECKEXTENSIONSPRESENT 0x41
-#define GETDEVICEPARAMETERS 0x48
-#define LEGACYGETDEVICEPARAMETERS 0x08
-#define EDDMAGIC1 0x55AA
-#define EDDMAGIC2 0xAA55
-
-
-#define READ_SECTORS 0x02         /* int13 AH=0x02 is READ_SECTORS command */
-#define EDD_MBR_SIG_OFFSET 0x1B8  /* offset of signature in the MBR */
-#define EDD_MBR_SIG_BUF    0x290  /* addr in boot params */
-#define EDD_MBR_SIG_MAX 16        /* max number of signatures to store */
-#define EDD_MBR_SIG_NR_BUF 0x1ea  /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
-				     in boot_params - treat this as 1 byte  */
+#include <uapi/linux/edd.h>
 
 #ifndef __ASSEMBLY__
-
-#define EDD_EXT_FIXED_DISK_ACCESS           (1 << 0)
-#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
-#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
-#define EDD_EXT_64BIT_EXTENSIONS            (1 << 3)
-
-#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0)
-#define EDD_INFO_GEOMETRY_VALID                (1 << 1)
-#define EDD_INFO_REMOVABLE                     (1 << 2)
-#define EDD_INFO_WRITE_VERIFY                  (1 << 3)
-#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION     (1 << 4)
-#define EDD_INFO_LOCKABLE                      (1 << 5)
-#define EDD_INFO_NO_MEDIA_PRESENT              (1 << 6)
-#define EDD_INFO_USE_INT13_FN50                (1 << 7)
-
-struct edd_device_params {
-	__u16 length;
-	__u16 info_flags;
-	__u32 num_default_cylinders;
-	__u32 num_default_heads;
-	__u32 sectors_per_track;
-	__u64 number_of_sectors;
-	__u16 bytes_per_sector;
-	__u32 dpte_ptr;		/* 0xFFFFFFFF for our purposes */
-	__u16 key;		/* = 0xBEDD */
-	__u8 device_path_info_length;	/* = 44 */
-	__u8 reserved2;
-	__u16 reserved3;
-	__u8 host_bus_type[4];
-	__u8 interface_type[8];
-	union {
-		struct {
-			__u16 base_address;
-			__u16 reserved1;
-			__u32 reserved2;
-		} __attribute__ ((packed)) isa;
-		struct {
-			__u8 bus;
-			__u8 slot;
-			__u8 function;
-			__u8 channel;
-			__u32 reserved;
-		} __attribute__ ((packed)) pci;
-		/* pcix is same as pci */
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) ibnd;
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) xprs;
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) htpt;
-		struct {
-			__u64 reserved;
-		} __attribute__ ((packed)) unknown;
-	} interface_path;
-	union {
-		struct {
-			__u8 device;
-			__u8 reserved1;
-			__u16 reserved2;
-			__u32 reserved3;
-			__u64 reserved4;
-		} __attribute__ ((packed)) ata;
-		struct {
-			__u8 device;
-			__u8 lun;
-			__u8 reserved1;
-			__u8 reserved2;
-			__u32 reserved3;
-			__u64 reserved4;
-		} __attribute__ ((packed)) atapi;
-		struct {
-			__u16 id;
-			__u64 lun;
-			__u16 reserved1;
-			__u32 reserved2;
-		} __attribute__ ((packed)) scsi;
-		struct {
-			__u64 serial_number;
-			__u64 reserved;
-		} __attribute__ ((packed)) usb;
-		struct {
-			__u64 eui;
-			__u64 reserved;
-		} __attribute__ ((packed)) i1394;
-		struct {
-			__u64 wwid;
-			__u64 lun;
-		} __attribute__ ((packed)) fibre;
-		struct {
-			__u64 identity_tag;
-			__u64 reserved;
-		} __attribute__ ((packed)) i2o;
-		struct {
-			__u32 array_number;
-			__u32 reserved1;
-			__u64 reserved2;
-		} __attribute__ ((packed)) raid;
-		struct {
-			__u8 device;
-			__u8 reserved1;
-			__u16 reserved2;
-			__u32 reserved3;
-			__u64 reserved4;
-		} __attribute__ ((packed)) sata;
-		struct {
-			__u64 reserved1;
-			__u64 reserved2;
-		} __attribute__ ((packed)) unknown;
-	} device_path;
-	__u8 reserved4;
-	__u8 checksum;
-} __attribute__ ((packed));
-
-struct edd_info {
-	__u8 device;
-	__u8 version;
-	__u16 interface_support;
-	__u16 legacy_max_cylinder;
-	__u8 legacy_max_head;
-	__u8 legacy_sectors_per_track;
-	struct edd_device_params params;
-} __attribute__ ((packed));
-
-struct edd {
-	unsigned int mbr_signature[EDD_MBR_SIG_MAX];
-	struct edd_info edd_info[EDDMAXNR];
-	unsigned char mbr_signature_nr;
-	unsigned char edd_info_nr;
-};
-
-#ifdef __KERNEL__
 extern struct edd edd;
-#endif /* __KERNEL__ */
 #endif				/*!__ASSEMBLY__ */
-
 #endif				/* _LINUX_EDD_H */
diff --git a/include/linux/elf.h b/include/linux/elf.h
index 59ef406..8c9048e 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -1,420 +1,9 @@
 #ifndef _LINUX_ELF_H
 #define _LINUX_ELF_H
 
-#include <linux/types.h>
-#include <linux/elf-em.h>
-#ifdef __KERNEL__
 #include <asm/elf.h>
-#endif
+#include <uapi/linux/elf.h>
 
-/* 32-bit ELF base types. */
-typedef __u32	Elf32_Addr;
-typedef __u16	Elf32_Half;
-typedef __u32	Elf32_Off;
-typedef __s32	Elf32_Sword;
-typedef __u32	Elf32_Word;
-
-/* 64-bit ELF base types. */
-typedef __u64	Elf64_Addr;
-typedef __u16	Elf64_Half;
-typedef __s16	Elf64_SHalf;
-typedef __u64	Elf64_Off;
-typedef __s32	Elf64_Sword;
-typedef __u32	Elf64_Word;
-typedef __u64	Elf64_Xword;
-typedef __s64	Elf64_Sxword;
-
-/* These constants are for the segment types stored in the image headers */
-#define PT_NULL    0
-#define PT_LOAD    1
-#define PT_DYNAMIC 2
-#define PT_INTERP  3
-#define PT_NOTE    4
-#define PT_SHLIB   5
-#define PT_PHDR    6
-#define PT_TLS     7               /* Thread local storage segment */
-#define PT_LOOS    0x60000000      /* OS-specific */
-#define PT_HIOS    0x6fffffff      /* OS-specific */
-#define PT_LOPROC  0x70000000
-#define PT_HIPROC  0x7fffffff
-#define PT_GNU_EH_FRAME		0x6474e550
-
-#define PT_GNU_STACK	(PT_LOOS + 0x474e551)
-
-/*
- * Extended Numbering
- *
- * If the real number of program header table entries is larger than
- * or equal to PN_XNUM(0xffff), it is set to sh_info field of the
- * section header at index 0, and PN_XNUM is set to e_phnum
- * field. Otherwise, the section header at index 0 is zero
- * initialized, if it exists.
- *
- * Specifications are available in:
- *
- * - Sun microsystems: Linker and Libraries.
- *   Part No: 817-1984-17, September 2008.
- *   URL: http://docs.sun.com/app/docs/doc/817-1984
- *
- * - System V ABI AMD64 Architecture Processor Supplement
- *   Draft Version 0.99.,
- *   May 11, 2009.
- *   URL: http://www.x86-64.org/
- */
-#define PN_XNUM 0xffff
-
-/* These constants define the different elf file types */
-#define ET_NONE   0
-#define ET_REL    1
-#define ET_EXEC   2
-#define ET_DYN    3
-#define ET_CORE   4
-#define ET_LOPROC 0xff00
-#define ET_HIPROC 0xffff
-
-/* This is the info that is needed to parse the dynamic section of the file */
-#define DT_NULL		0
-#define DT_NEEDED	1
-#define DT_PLTRELSZ	2
-#define DT_PLTGOT	3
-#define DT_HASH		4
-#define DT_STRTAB	5
-#define DT_SYMTAB	6
-#define DT_RELA		7
-#define DT_RELASZ	8
-#define DT_RELAENT	9
-#define DT_STRSZ	10
-#define DT_SYMENT	11
-#define DT_INIT		12
-#define DT_FINI		13
-#define DT_SONAME	14
-#define DT_RPATH 	15
-#define DT_SYMBOLIC	16
-#define DT_REL	        17
-#define DT_RELSZ	18
-#define DT_RELENT	19
-#define DT_PLTREL	20
-#define DT_DEBUG	21
-#define DT_TEXTREL	22
-#define DT_JMPREL	23
-#define DT_ENCODING	32
-#define OLD_DT_LOOS	0x60000000
-#define DT_LOOS		0x6000000d
-#define DT_HIOS		0x6ffff000
-#define DT_VALRNGLO	0x6ffffd00
-#define DT_VALRNGHI	0x6ffffdff
-#define DT_ADDRRNGLO	0x6ffffe00
-#define DT_ADDRRNGHI	0x6ffffeff
-#define DT_VERSYM	0x6ffffff0
-#define DT_RELACOUNT	0x6ffffff9
-#define DT_RELCOUNT	0x6ffffffa
-#define DT_FLAGS_1	0x6ffffffb
-#define DT_VERDEF	0x6ffffffc
-#define	DT_VERDEFNUM	0x6ffffffd
-#define DT_VERNEED	0x6ffffffe
-#define	DT_VERNEEDNUM	0x6fffffff
-#define OLD_DT_HIOS     0x6fffffff
-#define DT_LOPROC	0x70000000
-#define DT_HIPROC	0x7fffffff
-
-/* This info is needed when parsing the symbol table */
-#define STB_LOCAL  0
-#define STB_GLOBAL 1
-#define STB_WEAK   2
-
-#define STT_NOTYPE  0
-#define STT_OBJECT  1
-#define STT_FUNC    2
-#define STT_SECTION 3
-#define STT_FILE    4
-#define STT_COMMON  5
-#define STT_TLS     6
-
-#define ELF_ST_BIND(x)		((x) >> 4)
-#define ELF_ST_TYPE(x)		(((unsigned int) x) & 0xf)
-#define ELF32_ST_BIND(x)	ELF_ST_BIND(x)
-#define ELF32_ST_TYPE(x)	ELF_ST_TYPE(x)
-#define ELF64_ST_BIND(x)	ELF_ST_BIND(x)
-#define ELF64_ST_TYPE(x)	ELF_ST_TYPE(x)
-
-typedef struct dynamic{
-  Elf32_Sword d_tag;
-  union{
-    Elf32_Sword	d_val;
-    Elf32_Addr	d_ptr;
-  } d_un;
-} Elf32_Dyn;
-
-typedef struct {
-  Elf64_Sxword d_tag;		/* entry tag value */
-  union {
-    Elf64_Xword d_val;
-    Elf64_Addr d_ptr;
-  } d_un;
-} Elf64_Dyn;
-
-/* The following are used with relocations */
-#define ELF32_R_SYM(x) ((x) >> 8)
-#define ELF32_R_TYPE(x) ((x) & 0xff)
-
-#define ELF64_R_SYM(i)			((i) >> 32)
-#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
-
-typedef struct elf32_rel {
-  Elf32_Addr	r_offset;
-  Elf32_Word	r_info;
-} Elf32_Rel;
-
-typedef struct elf64_rel {
-  Elf64_Addr r_offset;	/* Location at which to apply the action */
-  Elf64_Xword r_info;	/* index and type of relocation */
-} Elf64_Rel;
-
-typedef struct elf32_rela{
-  Elf32_Addr	r_offset;
-  Elf32_Word	r_info;
-  Elf32_Sword	r_addend;
-} Elf32_Rela;
-
-typedef struct elf64_rela {
-  Elf64_Addr r_offset;	/* Location at which to apply the action */
-  Elf64_Xword r_info;	/* index and type of relocation */
-  Elf64_Sxword r_addend;	/* Constant addend used to compute value */
-} Elf64_Rela;
-
-typedef struct elf32_sym{
-  Elf32_Word	st_name;
-  Elf32_Addr	st_value;
-  Elf32_Word	st_size;
-  unsigned char	st_info;
-  unsigned char	st_other;
-  Elf32_Half	st_shndx;
-} Elf32_Sym;
-
-typedef struct elf64_sym {
-  Elf64_Word st_name;		/* Symbol name, index in string tbl */
-  unsigned char	st_info;	/* Type and binding attributes */
-  unsigned char	st_other;	/* No defined meaning, 0 */
-  Elf64_Half st_shndx;		/* Associated section index */
-  Elf64_Addr st_value;		/* Value of the symbol */
-  Elf64_Xword st_size;		/* Associated symbol size */
-} Elf64_Sym;
-
-
-#define EI_NIDENT	16
-
-typedef struct elf32_hdr{
-  unsigned char	e_ident[EI_NIDENT];
-  Elf32_Half	e_type;
-  Elf32_Half	e_machine;
-  Elf32_Word	e_version;
-  Elf32_Addr	e_entry;  /* Entry point */
-  Elf32_Off	e_phoff;
-  Elf32_Off	e_shoff;
-  Elf32_Word	e_flags;
-  Elf32_Half	e_ehsize;
-  Elf32_Half	e_phentsize;
-  Elf32_Half	e_phnum;
-  Elf32_Half	e_shentsize;
-  Elf32_Half	e_shnum;
-  Elf32_Half	e_shstrndx;
-} Elf32_Ehdr;
-
-typedef struct elf64_hdr {
-  unsigned char	e_ident[EI_NIDENT];	/* ELF "magic number" */
-  Elf64_Half e_type;
-  Elf64_Half e_machine;
-  Elf64_Word e_version;
-  Elf64_Addr e_entry;		/* Entry point virtual address */
-  Elf64_Off e_phoff;		/* Program header table file offset */
-  Elf64_Off e_shoff;		/* Section header table file offset */
-  Elf64_Word e_flags;
-  Elf64_Half e_ehsize;
-  Elf64_Half e_phentsize;
-  Elf64_Half e_phnum;
-  Elf64_Half e_shentsize;
-  Elf64_Half e_shnum;
-  Elf64_Half e_shstrndx;
-} Elf64_Ehdr;
-
-/* These constants define the permissions on sections in the program
-   header, p_flags. */
-#define PF_R		0x4
-#define PF_W		0x2
-#define PF_X		0x1
-
-typedef struct elf32_phdr{
-  Elf32_Word	p_type;
-  Elf32_Off	p_offset;
-  Elf32_Addr	p_vaddr;
-  Elf32_Addr	p_paddr;
-  Elf32_Word	p_filesz;
-  Elf32_Word	p_memsz;
-  Elf32_Word	p_flags;
-  Elf32_Word	p_align;
-} Elf32_Phdr;
-
-typedef struct elf64_phdr {
-  Elf64_Word p_type;
-  Elf64_Word p_flags;
-  Elf64_Off p_offset;		/* Segment file offset */
-  Elf64_Addr p_vaddr;		/* Segment virtual address */
-  Elf64_Addr p_paddr;		/* Segment physical address */
-  Elf64_Xword p_filesz;		/* Segment size in file */
-  Elf64_Xword p_memsz;		/* Segment size in memory */
-  Elf64_Xword p_align;		/* Segment alignment, file & memory */
-} Elf64_Phdr;
-
-/* sh_type */
-#define SHT_NULL	0
-#define SHT_PROGBITS	1
-#define SHT_SYMTAB	2
-#define SHT_STRTAB	3
-#define SHT_RELA	4
-#define SHT_HASH	5
-#define SHT_DYNAMIC	6
-#define SHT_NOTE	7
-#define SHT_NOBITS	8
-#define SHT_REL		9
-#define SHT_SHLIB	10
-#define SHT_DYNSYM	11
-#define SHT_NUM		12
-#define SHT_LOPROC	0x70000000
-#define SHT_HIPROC	0x7fffffff
-#define SHT_LOUSER	0x80000000
-#define SHT_HIUSER	0xffffffff
-
-/* sh_flags */
-#define SHF_WRITE	0x1
-#define SHF_ALLOC	0x2
-#define SHF_EXECINSTR	0x4
-#define SHF_MASKPROC	0xf0000000
-
-/* special section indexes */
-#define SHN_UNDEF	0
-#define SHN_LORESERVE	0xff00
-#define SHN_LOPROC	0xff00
-#define SHN_HIPROC	0xff1f
-#define SHN_ABS		0xfff1
-#define SHN_COMMON	0xfff2
-#define SHN_HIRESERVE	0xffff
- 
-typedef struct elf32_shdr {
-  Elf32_Word	sh_name;
-  Elf32_Word	sh_type;
-  Elf32_Word	sh_flags;
-  Elf32_Addr	sh_addr;
-  Elf32_Off	sh_offset;
-  Elf32_Word	sh_size;
-  Elf32_Word	sh_link;
-  Elf32_Word	sh_info;
-  Elf32_Word	sh_addralign;
-  Elf32_Word	sh_entsize;
-} Elf32_Shdr;
-
-typedef struct elf64_shdr {
-  Elf64_Word sh_name;		/* Section name, index in string tbl */
-  Elf64_Word sh_type;		/* Type of section */
-  Elf64_Xword sh_flags;		/* Miscellaneous section attributes */
-  Elf64_Addr sh_addr;		/* Section virtual addr at execution */
-  Elf64_Off sh_offset;		/* Section file offset */
-  Elf64_Xword sh_size;		/* Size of section in bytes */
-  Elf64_Word sh_link;		/* Index of another section */
-  Elf64_Word sh_info;		/* Additional section information */
-  Elf64_Xword sh_addralign;	/* Section alignment */
-  Elf64_Xword sh_entsize;	/* Entry size if section holds table */
-} Elf64_Shdr;
-
-#define	EI_MAG0		0		/* e_ident[] indexes */
-#define	EI_MAG1		1
-#define	EI_MAG2		2
-#define	EI_MAG3		3
-#define	EI_CLASS	4
-#define	EI_DATA		5
-#define	EI_VERSION	6
-#define	EI_OSABI	7
-#define	EI_PAD		8
-
-#define	ELFMAG0		0x7f		/* EI_MAG */
-#define	ELFMAG1		'E'
-#define	ELFMAG2		'L'
-#define	ELFMAG3		'F'
-#define	ELFMAG		"\177ELF"
-#define	SELFMAG		4
-
-#define	ELFCLASSNONE	0		/* EI_CLASS */
-#define	ELFCLASS32	1
-#define	ELFCLASS64	2
-#define	ELFCLASSNUM	3
-
-#define ELFDATANONE	0		/* e_ident[EI_DATA] */
-#define ELFDATA2LSB	1
-#define ELFDATA2MSB	2
-
-#define EV_NONE		0		/* e_version, EI_VERSION */
-#define EV_CURRENT	1
-#define EV_NUM		2
-
-#define ELFOSABI_NONE	0
-#define ELFOSABI_LINUX	3
-
-#ifndef ELF_OSABI
-#define ELF_OSABI ELFOSABI_NONE
-#endif
-
-/*
- * Notes used in ET_CORE. Architectures export some of the arch register sets
- * using the corresponding note types via the PTRACE_GETREGSET and
- * PTRACE_SETREGSET requests.
- */
-#define NT_PRSTATUS	1
-#define NT_PRFPREG	2
-#define NT_PRPSINFO	3
-#define NT_TASKSTRUCT	4
-#define NT_AUXV		6
-/*
- * Note to userspace developers: size of NT_SIGINFO note may increase
- * in the future to accomodate more fields, don't assume it is fixed!
- */
-#define NT_SIGINFO      0x53494749
-#define NT_FILE         0x46494c45
-#define NT_PRXFPREG     0x46e62b7f      /* copied from gdb5.1/include/elf/common.h */
-#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
-#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
-#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
-#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
-#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
-#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
-#define NT_S390_HIGH_GPRS	0x300	/* s390 upper register halves */
-#define NT_S390_TIMER	0x301		/* s390 timer register */
-#define NT_S390_TODCMP	0x302		/* s390 TOD clock comparator register */
-#define NT_S390_TODPREG	0x303		/* s390 TOD programmable register */
-#define NT_S390_CTRS	0x304		/* s390 control registers */
-#define NT_S390_PREFIX	0x305		/* s390 prefix register */
-#define NT_S390_LAST_BREAK	0x306	/* s390 breaking event address */
-#define NT_S390_SYSTEM_CALL	0x307	/* s390 system call restart data */
-#define NT_S390_TDB	0x308		/* s390 transaction diagnostic block */
-#define NT_ARM_VFP	0x400		/* ARM VFP/NEON registers */
-#define NT_ARM_TLS	0x401		/* ARM TLS register */
-#define NT_ARM_HW_BREAK	0x402		/* ARM hardware breakpoint registers */
-#define NT_ARM_HW_WATCH	0x403		/* ARM hardware watchpoint registers */
-
-
-/* Note header in a PT_NOTE section */
-typedef struct elf32_note {
-  Elf32_Word	n_namesz;	/* Name size */
-  Elf32_Word	n_descsz;	/* Content size */
-  Elf32_Word	n_type;		/* Content type */
-} Elf32_Nhdr;
-
-/* Note header in a PT_NOTE section */
-typedef struct elf64_note {
-  Elf64_Word n_namesz;	/* Name size */
-  Elf64_Word n_descsz;	/* Content size */
-  Elf64_Word n_type;	/* Content type */
-} Elf64_Nhdr;
-
-#ifdef __KERNEL__
 #ifndef elf_read_implies_exec
   /* Executables for which elf_read_implies_exec() returns TRUE will
      have the READ_IMPLIES_EXEC personality flag set automatically.
@@ -455,5 +44,4 @@
 extern int elf_coredump_extra_notes_size(void);
 extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset);
 #endif
-#endif /* __KERNEL__ */
 #endif /* _LINUX_ELF_H */
diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h
index 0698c79..cdd3d13 100644
--- a/include/linux/elfcore.h
+++ b/include/linux/elfcore.h
@@ -1,109 +1,11 @@
 #ifndef _LINUX_ELFCORE_H
 #define _LINUX_ELFCORE_H
 
-#include <linux/types.h>
-#include <linux/signal.h>
-#include <linux/time.h>
-#ifdef __KERNEL__
 #include <linux/user.h>
 #include <linux/bug.h>
-#endif
-#include <linux/ptrace.h>
-#include <linux/elf.h>
-#include <linux/fs.h>
-
-struct elf_siginfo
-{
-	int	si_signo;			/* signal number */
-	int	si_code;			/* extra code */
-	int	si_errno;			/* errno */
-};
-
-#ifdef __KERNEL__
 #include <asm/elf.h>
-#endif
+#include <uapi/linux/elfcore.h>
 
-#ifndef __KERNEL__
-typedef elf_greg_t greg_t;
-typedef elf_gregset_t gregset_t;
-typedef elf_fpregset_t fpregset_t;
-typedef elf_fpxregset_t fpxregset_t;
-#define NGREG ELF_NGREG
-#endif
-
-/*
- * Definitions to generate Intel SVR4-like core files.
- * These mostly have the same names as the SVR4 types with "elf_"
- * tacked on the front to prevent clashes with linux definitions,
- * and the typedef forms have been avoided.  This is mostly like
- * the SVR4 structure, but more Linuxy, with things that Linux does
- * not support and which gdb doesn't really use excluded.
- * Fields present but not used are marked with "XXX".
- */
-struct elf_prstatus
-{
-#if 0
-	long	pr_flags;	/* XXX Process flags */
-	short	pr_why;		/* XXX Reason for process halt */
-	short	pr_what;	/* XXX More detailed reason */
-#endif
-	struct elf_siginfo pr_info;	/* Info associated with signal */
-	short	pr_cursig;		/* Current signal */
-	unsigned long pr_sigpend;	/* Set of pending signals */
-	unsigned long pr_sighold;	/* Set of held signals */
-#if 0
-	struct sigaltstack pr_altstack;	/* Alternate stack info */
-	struct sigaction pr_action;	/* Signal action for current sig */
-#endif
-	pid_t	pr_pid;
-	pid_t	pr_ppid;
-	pid_t	pr_pgrp;
-	pid_t	pr_sid;
-	struct timeval pr_utime;	/* User time */
-	struct timeval pr_stime;	/* System time */
-	struct timeval pr_cutime;	/* Cumulative user time */
-	struct timeval pr_cstime;	/* Cumulative system time */
-#if 0
-	long	pr_instr;		/* Current instruction */
-#endif
-	elf_gregset_t pr_reg;	/* GP registers */
-#ifdef CONFIG_BINFMT_ELF_FDPIC
-	/* When using FDPIC, the loadmap addresses need to be communicated
-	 * to GDB in order for GDB to do the necessary relocations.  The
-	 * fields (below) used to communicate this information are placed
-	 * immediately after ``pr_reg'', so that the loadmap addresses may
-	 * be viewed as part of the register set if so desired.
-	 */
-	unsigned long pr_exec_fdpic_loadmap;
-	unsigned long pr_interp_fdpic_loadmap;
-#endif
-	int pr_fpvalid;		/* True if math co-processor being used.  */
-};
-
-#define ELF_PRARGSZ	(80)	/* Number of chars for args */
-
-struct elf_prpsinfo
-{
-	char	pr_state;	/* numeric process state */
-	char	pr_sname;	/* char for pr_state */
-	char	pr_zomb;	/* zombie */
-	char	pr_nice;	/* nice val */
-	unsigned long pr_flag;	/* flags */
-	__kernel_uid_t	pr_uid;
-	__kernel_gid_t	pr_gid;
-	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
-	/* Lots missing */
-	char	pr_fname[16];	/* filename of executable */
-	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
-};
-
-#ifndef __KERNEL__
-typedef struct elf_prstatus prstatus_t;
-typedef struct elf_prpsinfo prpsinfo_t;
-#define PRARGSZ ELF_PRARGSZ 
-#endif
-
-#ifdef __KERNEL__
 static inline void elf_core_copy_regs(elf_gregset_t *elfregs, struct pt_regs *regs)
 {
 #ifdef ELF_CORE_COPY_REGS
@@ -167,6 +69,4 @@
 elf_core_write_extra_data(struct file *file, size_t *size, unsigned long limit);
 extern size_t elf_core_extra_data_size(void);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_ELFCORE_H */
diff --git a/include/linux/errno.h b/include/linux/errno.h
index e0de516..f6bf082 100644
--- a/include/linux/errno.h
+++ b/include/linux/errno.h
@@ -1,9 +1,8 @@
 #ifndef _LINUX_ERRNO_H
 #define _LINUX_ERRNO_H
 
-#include <asm/errno.h>
+#include <uapi/linux/errno.h>
 
-#ifdef __KERNEL__
 
 /*
  * These should never be seen by user programs.  To return one of ERESTART*
@@ -32,5 +31,3 @@
 #define EIOCBRETRY	530	/* iocb queued, will trigger a retry */
 
 #endif
-
-#endif
diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h
index fd0628b..9ca23fc 100644
--- a/include/linux/errqueue.h
+++ b/include/linux/errqueue.h
@@ -1,33 +1,12 @@
 #ifndef _LINUX_ERRQUEUE_H
 #define _LINUX_ERRQUEUE_H 1
 
-#include <linux/types.h>
-
-struct sock_extended_err {
-	__u32	ee_errno;	
-	__u8	ee_origin;
-	__u8	ee_type;
-	__u8	ee_code;
-	__u8	ee_pad;
-	__u32   ee_info;
-	__u32   ee_data;
-};
-
-#define SO_EE_ORIGIN_NONE	0
-#define SO_EE_ORIGIN_LOCAL	1
-#define SO_EE_ORIGIN_ICMP	2
-#define SO_EE_ORIGIN_ICMP6	3
-#define SO_EE_ORIGIN_TXSTATUS	4
-#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS
-
-#define SO_EE_OFFENDER(ee)	((struct sockaddr*)((ee)+1))
-
-#ifdef __KERNEL__
 
 #include <net/ip.h>
 #if IS_ENABLED(CONFIG_IPV6)
 #include <linux/ipv6.h>
 #endif
+#include <uapi/linux/errqueue.h>
 
 #define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb))
 
@@ -44,5 +23,3 @@
 };
 
 #endif
-
-#endif
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index fcb4f8e..c8e3e7e3 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -9,596 +9,12 @@
  *                                scott.feldman@intel.com)
  * Portions Copyright (C) Sun Microsystems 2008
  */
-
 #ifndef _LINUX_ETHTOOL_H
 #define _LINUX_ETHTOOL_H
 
-#ifdef __KERNEL__
 #include <linux/compat.h>
-#endif
-#include <linux/types.h>
-#include <linux/if_ether.h>
+#include <uapi/linux/ethtool.h>
 
-/* This should work for both 32 and 64 bit userland. */
-struct ethtool_cmd {
-	__u32	cmd;
-	__u32	supported;	/* Features this interface supports */
-	__u32	advertising;	/* Features this interface advertises */
-	__u16	speed;	        /* The forced speed (lower bits) in
-				 * Mbps. Please use
-				 * ethtool_cmd_speed()/_set() to
-				 * access it */
-	__u8	duplex;		/* Duplex, half or full */
-	__u8	port;		/* Which connector port */
-	__u8	phy_address;	/* MDIO PHY address (PRTAD for clause 45).
-				 * May be read-only or read-write
-				 * depending on the driver.
-				 */
-	__u8	transceiver;	/* Which transceiver to use */
-	__u8	autoneg;	/* Enable or disable autonegotiation */
-	__u8	mdio_support;	/* MDIO protocols supported.  Read-only.
-				 * Not set by all drivers.
-				 */
-	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
-	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
-	__u16	speed_hi;       /* The forced speed (upper
-				 * bits) in Mbps. Please use
-				 * ethtool_cmd_speed()/_set() to
-				 * access it */
-	__u8	eth_tp_mdix;	/* twisted pair MDI-X status */
-	__u8    eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
-				   * link should be renegotiated if necessary
-				   */
-	__u32	lp_advertising;	/* Features the link partner advertises */
-	__u32	reserved[2];
-};
-
-static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
-					 __u32 speed)
-{
-
-	ep->speed = (__u16)speed;
-	ep->speed_hi = (__u16)(speed >> 16);
-}
-
-static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
-{
-	return (ep->speed_hi << 16) | ep->speed;
-}
-
-/* Device supports clause 22 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h>.  This should not be
- * set if there are known to be no such peripherals present or if
- * the driver only emulates clause 22 registers for compatibility.
- */
-#define ETH_MDIO_SUPPORTS_C22	1
-
-/* Device supports clause 45 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
- * This should not be set if there are known to be no such peripherals
- * present.
- */
-#define ETH_MDIO_SUPPORTS_C45	2
-
-#define ETHTOOL_FWVERS_LEN	32
-#define ETHTOOL_BUSINFO_LEN	32
-/* these strings are set to whatever the driver author decides... */
-struct ethtool_drvinfo {
-	__u32	cmd;
-	char	driver[32];	/* driver short name, "tulip", "eepro100" */
-	char	version[32];	/* driver version string */
-	char	fw_version[ETHTOOL_FWVERS_LEN];	/* firmware version string */
-	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
-				/* For PCI devices, use pci_name(pci_dev). */
-	char	reserved1[32];
-	char	reserved2[12];
-				/*
-				 * Some struct members below are filled in
-				 * using ops->get_sset_count().  Obtaining
-				 * this info from ethtool_drvinfo is now
-				 * deprecated; Use ETHTOOL_GSSET_INFO
-				 * instead.
-				 */
-	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
-	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
-	__u32	testinfo_len;
-	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
-	__u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
-};
-
-#define SOPASS_MAX	6
-/* wake-on-lan settings */
-struct ethtool_wolinfo {
-	__u32	cmd;
-	__u32	supported;
-	__u32	wolopts;
-	__u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
-};
-
-/* for passing single values */
-struct ethtool_value {
-	__u32	cmd;
-	__u32	data;
-};
-
-/* for passing big chunks of data */
-struct ethtool_regs {
-	__u32	cmd;
-	__u32	version; /* driver-specific, indicates different chips/revs */
-	__u32	len; /* bytes */
-	__u8	data[0];
-};
-
-/* for passing EEPROM chunks */
-struct ethtool_eeprom {
-	__u32	cmd;
-	__u32	magic;
-	__u32	offset; /* in bytes */
-	__u32	len; /* in bytes */
-	__u8	data[0];
-};
-
-/**
- * struct ethtool_eee - Energy Efficient Ethernet information
- * @cmd: ETHTOOL_{G,S}EEE
- * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
- *	for which there is EEE support.
- * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
- *	advertised as eee capable.
- * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
- *	combinations advertised by the link partner as eee capable.
- * @eee_active: Result of the eee auto negotiation.
- * @eee_enabled: EEE configured mode (enabled/disabled).
- * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
- *	that eee was negotiated.
- * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
- *	its tx lpi (after reaching 'idle' state). Effective only when eee
- *	was negotiated and tx_lpi_enabled was set.
- */
-struct ethtool_eee {
-	__u32	cmd;
-	__u32	supported;
-	__u32	advertised;
-	__u32	lp_advertised;
-	__u32	eee_active;
-	__u32	eee_enabled;
-	__u32	tx_lpi_enabled;
-	__u32	tx_lpi_timer;
-	__u32	reserved[2];
-};
-
-/**
- * struct ethtool_modinfo - plugin module eeprom information
- * @cmd: %ETHTOOL_GMODULEINFO
- * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
- * @eeprom_len: Length of the eeprom
- *
- * This structure is used to return the information to
- * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
- * The type code indicates the eeprom data format
- */
-struct ethtool_modinfo {
-	__u32   cmd;
-	__u32   type;
-	__u32   eeprom_len;
-	__u32   reserved[8];
-};
-
-/**
- * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
- * @cmd: ETHTOOL_{G,S}COALESCE
- * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
- *	a packet arrives.
- * @rx_max_coalesced_frames: Maximum number of packets to receive
- *	before an RX interrupt.
- * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
- *	this value applies while an IRQ is being serviced by the host.
- * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
- *	except that this value applies while an IRQ is being serviced
- *	by the host.
- * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
- *	a packet is sent.
- * @tx_max_coalesced_frames: Maximum number of packets to be sent
- *	before a TX interrupt.
- * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
- *	this value applies while an IRQ is being serviced by the host.
- * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
- *	except that this value applies while an IRQ is being serviced
- *	by the host.
- * @stats_block_coalesce_usecs: How many usecs to delay in-memory
- *	statistics block updates.  Some drivers do not have an
- *	in-memory statistic block, and in such cases this value is
- *	ignored.  This value must not be zero.
- * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
- * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
- * @pkt_rate_low: Threshold for low packet rate (packets per second).
- * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
- *	a packet arrives, when the packet rate is below @pkt_rate_low.
- * @rx_max_coalesced_frames_low: Maximum number of packets to be received
- *	before an RX interrupt, when the packet rate is below @pkt_rate_low.
- * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
- *	a packet is sent, when the packet rate is below @pkt_rate_low.
- * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
- *	a TX interrupt, when the packet rate is below @pkt_rate_low.
- * @pkt_rate_high: Threshold for high packet rate (packets per second).
- * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
- *	a packet arrives, when the packet rate is above @pkt_rate_high.
- * @rx_max_coalesced_frames_high: Maximum number of packets to be received
- *	before an RX interrupt, when the packet rate is above @pkt_rate_high.
- * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
- *	a packet is sent, when the packet rate is above @pkt_rate_high.
- * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
- *	a TX interrupt, when the packet rate is above @pkt_rate_high.
- * @rate_sample_interval: How often to do adaptive coalescing packet rate
- *	sampling, measured in seconds.  Must not be zero.
- *
- * Each pair of (usecs, max_frames) fields specifies this exit
- * condition for interrupt coalescing:
- *	(usecs > 0 && time_since_first_completion >= usecs) ||
- *	(max_frames > 0 && completed_frames >= max_frames)
- * It is illegal to set both usecs and max_frames to zero as this
- * would cause interrupts to never be generated.  To disable
- * coalescing, set usecs = 0 and max_frames = 1.
- *
- * Some implementations ignore the value of max_frames and use the
- * condition:
- *	time_since_first_completion >= usecs
- * This is deprecated.  Drivers for hardware that does not support
- * counting completions should validate that max_frames == !rx_usecs.
- *
- * Adaptive RX/TX coalescing is an algorithm implemented by some
- * drivers to improve latency under low packet rates and improve
- * throughput under high packet rates.  Some drivers only implement
- * one of RX or TX adaptive coalescing.  Anything not implemented by
- * the driver causes these values to be silently ignored.
- *
- * When the packet rate is below @pkt_rate_high but above
- * @pkt_rate_low (both measured in packets per second) the
- * normal {rx,tx}_* coalescing parameters are used.
- */
-struct ethtool_coalesce {
-	__u32	cmd;
-	__u32	rx_coalesce_usecs;
-	__u32	rx_max_coalesced_frames;
-	__u32	rx_coalesce_usecs_irq;
-	__u32	rx_max_coalesced_frames_irq;
-	__u32	tx_coalesce_usecs;
-	__u32	tx_max_coalesced_frames;
-	__u32	tx_coalesce_usecs_irq;
-	__u32	tx_max_coalesced_frames_irq;
-	__u32	stats_block_coalesce_usecs;
-	__u32	use_adaptive_rx_coalesce;
-	__u32	use_adaptive_tx_coalesce;
-	__u32	pkt_rate_low;
-	__u32	rx_coalesce_usecs_low;
-	__u32	rx_max_coalesced_frames_low;
-	__u32	tx_coalesce_usecs_low;
-	__u32	tx_max_coalesced_frames_low;
-	__u32	pkt_rate_high;
-	__u32	rx_coalesce_usecs_high;
-	__u32	rx_max_coalesced_frames_high;
-	__u32	tx_coalesce_usecs_high;
-	__u32	tx_max_coalesced_frames_high;
-	__u32	rate_sample_interval;
-};
-
-/* for configuring RX/TX ring parameters */
-struct ethtool_ringparam {
-	__u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
-
-	/* Read only attributes.  These indicate the maximum number
-	 * of pending RX/TX ring entries the driver will allow the
-	 * user to set.
-	 */
-	__u32	rx_max_pending;
-	__u32	rx_mini_max_pending;
-	__u32	rx_jumbo_max_pending;
-	__u32	tx_max_pending;
-
-	/* Values changeable by the user.  The valid values are
-	 * in the range 1 to the "*_max_pending" counterpart above.
-	 */
-	__u32	rx_pending;
-	__u32	rx_mini_pending;
-	__u32	rx_jumbo_pending;
-	__u32	tx_pending;
-};
-
-/**
- * struct ethtool_channels - configuring number of network channel
- * @cmd: ETHTOOL_{G,S}CHANNELS
- * @max_rx: Read only. Maximum number of receive channel the driver support.
- * @max_tx: Read only. Maximum number of transmit channel the driver support.
- * @max_other: Read only. Maximum number of other channel the driver support.
- * @max_combined: Read only. Maximum number of combined channel the driver
- *	support. Set of queues RX, TX or other.
- * @rx_count: Valid values are in the range 1 to the max_rx.
- * @tx_count: Valid values are in the range 1 to the max_tx.
- * @other_count: Valid values are in the range 1 to the max_other.
- * @combined_count: Valid values are in the range 1 to the max_combined.
- *
- * This can be used to configure RX, TX and other channels.
- */
-
-struct ethtool_channels {
-	__u32	cmd;
-	__u32	max_rx;
-	__u32	max_tx;
-	__u32	max_other;
-	__u32	max_combined;
-	__u32	rx_count;
-	__u32	tx_count;
-	__u32	other_count;
-	__u32	combined_count;
-};
-
-/* for configuring link flow control parameters */
-struct ethtool_pauseparam {
-	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
-
-	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
-	 * being true) the user may set 'autoneg' here non-zero to have the
-	 * pause parameters be auto-negotiated too.  In such a case, the
-	 * {rx,tx}_pause values below determine what capabilities are
-	 * advertised.
-	 *
-	 * If 'autoneg' is zero or the link is not being auto-negotiated,
-	 * then {rx,tx}_pause force the driver to use/not-use pause
-	 * flow control.
-	 */
-	__u32	autoneg;
-	__u32	rx_pause;
-	__u32	tx_pause;
-};
-
-#define ETH_GSTRING_LEN		32
-enum ethtool_stringset {
-	ETH_SS_TEST		= 0,
-	ETH_SS_STATS,
-	ETH_SS_PRIV_FLAGS,
-	ETH_SS_NTUPLE_FILTERS,	/* Do not use, GRXNTUPLE is now deprecated */
-	ETH_SS_FEATURES,
-};
-
-/* for passing string sets for data tagging */
-struct ethtool_gstrings {
-	__u32	cmd;		/* ETHTOOL_GSTRINGS */
-	__u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/
-	__u32	len;		/* number of strings in the string set */
-	__u8	data[0];
-};
-
-struct ethtool_sset_info {
-	__u32	cmd;		/* ETHTOOL_GSSET_INFO */
-	__u32	reserved;
-	__u64	sset_mask;	/* input: each bit selects an sset to query */
-				/* output: each bit a returned sset */
-	__u32	data[0];	/* ETH_SS_xxx count, in order, based on bits
-				   in sset_mask.  One bit implies one
-				   __u32, two bits implies two
-				   __u32's, etc. */
-};
-
-/**
- * enum ethtool_test_flags - flags definition of ethtool_test
- * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
- *	only online tests.
- * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
- * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
- *	test.
- * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
- */
-
-enum ethtool_test_flags {
-	ETH_TEST_FL_OFFLINE	= (1 << 0),
-	ETH_TEST_FL_FAILED	= (1 << 1),
-	ETH_TEST_FL_EXTERNAL_LB	= (1 << 2),
-	ETH_TEST_FL_EXTERNAL_LB_DONE	= (1 << 3),
-};
-
-/* for requesting NIC test and getting results*/
-struct ethtool_test {
-	__u32	cmd;		/* ETHTOOL_TEST */
-	__u32	flags;		/* ETH_TEST_FL_xxx */
-	__u32	reserved;
-	__u32	len;		/* result length, in number of u64 elements */
-	__u64	data[0];
-};
-
-/* for dumping NIC-specific statistics */
-struct ethtool_stats {
-	__u32	cmd;		/* ETHTOOL_GSTATS */
-	__u32	n_stats;	/* number of u64's being returned */
-	__u64	data[0];
-};
-
-struct ethtool_perm_addr {
-	__u32	cmd;		/* ETHTOOL_GPERMADDR */
-	__u32	size;
-	__u8	data[0];
-};
-
-/* boolean flags controlling per-interface behavior characteristics.
- * When reading, the flag indicates whether or not a certain behavior
- * is enabled/present.  When writing, the flag indicates whether
- * or not the driver should turn on (set) or off (clear) a behavior.
- *
- * Some behaviors may read-only (unconditionally absent or present).
- * If such is the case, return EINVAL in the set-flags operation if the
- * flag differs from the read-only value.
- */
-enum ethtool_flags {
-	ETH_FLAG_TXVLAN		= (1 << 7),	/* TX VLAN offload enabled */
-	ETH_FLAG_RXVLAN		= (1 << 8),	/* RX VLAN offload enabled */
-	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
-	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
-	ETH_FLAG_RXHASH		= (1 << 28),
-};
-
-/* The following structures are for supporting RX network flow
- * classification and RX n-tuple configuration. Note, all multibyte
- * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
- * be in network byte order.
- */
-
-/**
- * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @psrc: Source port
- * @pdst: Destination port
- * @tos: Type-of-service
- *
- * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
- */
-struct ethtool_tcpip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be16	psrc;
-	__be16	pdst;
-	__u8    tos;
-};
-
-/**
- * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @spi: Security parameters index
- * @tos: Type-of-service
- *
- * This can be used to specify an IPsec transport or tunnel over IPv4.
- */
-struct ethtool_ah_espip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be32	spi;
-	__u8    tos;
-};
-
-#define	ETH_RX_NFC_IP4	1
-
-/**
- * struct ethtool_usrip4_spec - general flow specification for IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @l4_4_bytes: First 4 bytes of transport (layer 4) header
- * @tos: Type-of-service
- * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
- * @proto: Transport protocol number; mask must be 0
- */
-struct ethtool_usrip4_spec {
-	__be32	ip4src;
-	__be32	ip4dst;
-	__be32	l4_4_bytes;
-	__u8    tos;
-	__u8    ip_ver;
-	__u8    proto;
-};
-
-union ethtool_flow_union {
-	struct ethtool_tcpip4_spec		tcp_ip4_spec;
-	struct ethtool_tcpip4_spec		udp_ip4_spec;
-	struct ethtool_tcpip4_spec		sctp_ip4_spec;
-	struct ethtool_ah_espip4_spec		ah_ip4_spec;
-	struct ethtool_ah_espip4_spec		esp_ip4_spec;
-	struct ethtool_usrip4_spec		usr_ip4_spec;
-	struct ethhdr				ether_spec;
-	__u8					hdata[60];
-};
-
-struct ethtool_flow_ext {
-	__be16	vlan_etype;
-	__be16	vlan_tci;
-	__be32	data[2];
-};
-
-/**
- * struct ethtool_rx_flow_spec - classification rule for RX flows
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow fields to match (dependent on @flow_type)
- * @h_ext: Additional fields to match
- * @m_u: Masks for flow field bits to be matched
- * @m_ext: Masks for additional field bits to be matched
- *	Note, all additional fields must be ignored unless @flow_type
- *	includes the %FLOW_EXT flag.
- * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
- *	if packets should be discarded
- * @location: Location of rule in the table.  Locations must be
- *	numbered such that a flow matching multiple rules will be
- *	classified according to the first (lowest numbered) rule.
- */
-struct ethtool_rx_flow_spec {
-	__u32		flow_type;
-	union ethtool_flow_union h_u;
-	struct ethtool_flow_ext h_ext;
-	union ethtool_flow_union m_u;
-	struct ethtool_flow_ext m_ext;
-	__u64		ring_cookie;
-	__u32		location;
-};
-
-/**
- * struct ethtool_rxnfc - command to get or set RX flow classification rules
- * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
- *	%ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
- *	%ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
- * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
- * @data: Command-dependent value
- * @fs: Flow classification rule
- * @rule_cnt: Number of rules to be affected
- * @rule_locs: Array of used rule locations
- *
- * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
- * the fields included in the flow hash, e.g. %RXH_IP_SRC.  The following
- * structure fields must not be used.
- *
- * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
- * on return.
- *
- * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
- * rules on return.  If @data is non-zero on return then it is the
- * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
- * driver supports any special location values.  If that flag is not
- * set in @data then special location values should not be used.
- *
- * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
- * existing rule on entry and @fs contains the rule on return.
- *
- * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
- * user buffer for @rule_locs on entry.  On return, @data is the size
- * of the rule table, @rule_cnt is the number of defined rules, and
- * @rule_locs contains the locations of the defined rules.  Drivers
- * must use the second parameter to get_rxnfc() instead of @rule_locs.
- *
- * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
- * @fs.@location either specifies the location to use or is a special
- * location value with %RX_CLS_LOC_SPECIAL flag set.  On return,
- * @fs.@location is the actual rule location.
- *
- * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
- * existing rule on entry.
- *
- * A driver supporting the special location values for
- * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
- * location, and may remove a rule at a later location (lower
- * priority) that matches exactly the same set of flows.  The special
- * values are: %RX_CLS_LOC_ANY, selecting any location;
- * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
- * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
- * location (minimum priority).  Additional special values may be
- * defined in future and drivers must return -%EINVAL for any
- * unrecognised value.
- */
-struct ethtool_rxnfc {
-	__u32				cmd;
-	__u32				flow_type;
-	__u64				data;
-	struct ethtool_rx_flow_spec	fs;
-	__u32				rule_cnt;
-	__u32				rule_locs[0];
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 
 struct compat_ethtool_rx_flow_spec {
@@ -621,223 +37,6 @@
 };
 
 #endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
-
-/**
- * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
- * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
- * @size: On entry, the array size of the user buffer, which may be zero.
- *	On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
- *	indirection table.
- * @ring_index: RX ring/queue index for each hash value
- *
- * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
- * should be returned.  For %ETHTOOL_SRXFHINDIR, a @size of zero means
- * the table should be reset to default values.  This last feature
- * is not supported by the original implementations.
- */
-struct ethtool_rxfh_indir {
-	__u32	cmd;
-	__u32	size;
-	__u32	ring_index[0];
-};
-
-/**
- * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow field values to match (dependent on @flow_type)
- * @m_u: Masks for flow field value bits to be ignored
- * @vlan_tag: VLAN tag to match
- * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
- * @data: Driver-dependent data to match
- * @data_mask: Mask for driver-dependent data bits to be ignored
- * @action: RX ring/queue index to deliver to (non-negative) or other action
- *	(negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
- *
- * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
- * a field value and mask are both zero this is treated as if all mask
- * bits are set i.e. the field is ignored.
- */
-struct ethtool_rx_ntuple_flow_spec {
-	__u32		 flow_type;
-	union {
-		struct ethtool_tcpip4_spec		tcp_ip4_spec;
-		struct ethtool_tcpip4_spec		udp_ip4_spec;
-		struct ethtool_tcpip4_spec		sctp_ip4_spec;
-		struct ethtool_ah_espip4_spec		ah_ip4_spec;
-		struct ethtool_ah_espip4_spec		esp_ip4_spec;
-		struct ethtool_usrip4_spec		usr_ip4_spec;
-		struct ethhdr				ether_spec;
-		__u8					hdata[72];
-	} h_u, m_u;
-
-	__u16	        vlan_tag;
-	__u16	        vlan_tag_mask;
-	__u64		data;
-	__u64		data_mask;
-
-	__s32		action;
-#define ETHTOOL_RXNTUPLE_ACTION_DROP	(-1)	/* drop packet */
-#define ETHTOOL_RXNTUPLE_ACTION_CLEAR	(-2)	/* clear filter */
-};
-
-/**
- * struct ethtool_rx_ntuple - command to set or clear RX flow filter
- * @cmd: Command number - %ETHTOOL_SRXNTUPLE
- * @fs: Flow filter specification
- */
-struct ethtool_rx_ntuple {
-	__u32					cmd;
-	struct ethtool_rx_ntuple_flow_spec	fs;
-};
-
-#define ETHTOOL_FLASH_MAX_FILENAME	128
-enum ethtool_flash_op_type {
-	ETHTOOL_FLASH_ALL_REGIONS	= 0,
-};
-
-/* for passing firmware flashing related parameters */
-struct ethtool_flash {
-	__u32	cmd;
-	__u32	region;
-	char	data[ETHTOOL_FLASH_MAX_FILENAME];
-};
-
-/**
- * struct ethtool_dump - used for retrieving, setting device dump
- * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
- * 	%ETHTOOL_SET_DUMP
- * @version: FW version of the dump, filled in by driver
- * @flag: driver dependent flag for dump setting, filled in by driver during
- *        get and filled in by ethtool for set operation.
- *        flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
- *        firmware dump is disabled.
- * @len: length of dump data, used as the length of the user buffer on entry to
- * 	 %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
- * 	 for %ETHTOOL_GET_DUMP_FLAG command
- * @data: data collected for get dump data operation
- */
-
-#define ETH_FW_DUMP_DISABLE 0
-
-struct ethtool_dump {
-	__u32	cmd;
-	__u32	version;
-	__u32	flag;
-	__u32	len;
-	__u8	data[0];
-};
-
-/* for returning and changing feature sets */
-
-/**
- * struct ethtool_get_features_block - block with state of 32 features
- * @available: mask of changeable features
- * @requested: mask of features requested to be enabled if possible
- * @active: mask of currently enabled features
- * @never_changed: mask of features not changeable for any device
- */
-struct ethtool_get_features_block {
-	__u32	available;
-	__u32	requested;
-	__u32	active;
-	__u32	never_changed;
-};
-
-/**
- * struct ethtool_gfeatures - command to get state of device's features
- * @cmd: command number = %ETHTOOL_GFEATURES
- * @size: in: number of elements in the features[] array;
- *       out: number of elements in features[] needed to hold all features
- * @features: state of features
- */
-struct ethtool_gfeatures {
-	__u32	cmd;
-	__u32	size;
-	struct ethtool_get_features_block features[0];
-};
-
-/**
- * struct ethtool_set_features_block - block with request for 32 features
- * @valid: mask of features to be changed
- * @requested: values of features to be changed
- */
-struct ethtool_set_features_block {
-	__u32	valid;
-	__u32	requested;
-};
-
-/**
- * struct ethtool_sfeatures - command to request change in device's features
- * @cmd: command number = %ETHTOOL_SFEATURES
- * @size: array size of the features[] array
- * @features: feature change masks
- */
-struct ethtool_sfeatures {
-	__u32	cmd;
-	__u32	size;
-	struct ethtool_set_features_block features[0];
-};
-
-/**
- * struct ethtool_ts_info - holds a device's timestamping and PHC association
- * @cmd: command number = %ETHTOOL_GET_TS_INFO
- * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
- * @phc_index: device index of the associated PHC, or -1 if there is none
- * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
- * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
- *
- * The bits in the 'tx_types' and 'rx_filters' fields correspond to
- * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
- * respectively.  For example, if the device supports HWTSTAMP_TX_ON,
- * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
- */
-struct ethtool_ts_info {
-	__u32	cmd;
-	__u32	so_timestamping;
-	__s32	phc_index;
-	__u32	tx_types;
-	__u32	tx_reserved[3];
-	__u32	rx_filters;
-	__u32	rx_reserved[3];
-};
-
-/*
- * %ETHTOOL_SFEATURES changes features present in features[].valid to the
- * values of corresponding bits in features[].requested. Bits in .requested
- * not set in .valid or not changeable are ignored.
- *
- * Returns %EINVAL when .valid contains undefined or never-changeable bits
- * or size is not equal to required number of features words (32-bit blocks).
- * Returns >= 0 if request was completed; bits set in the value mean:
- *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
- *	changeable (not present in %ETHTOOL_GFEATURES' features[].available)
- *	those bits were ignored.
- *   %ETHTOOL_F_WISH - some or all changes requested were recorded but the
- *      resulting state of bits masked by .valid is not equal to .requested.
- *      Probably there are other device-specific constraints on some features
- *      in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
- *      here as though ignored bits were cleared.
- *   %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
- *      compatibility functions. Requested offload state cannot be properly
- *      managed by kernel.
- *
- * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
- * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
- * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
- * significant bit in features[0] fields. Empty strings mark undefined features.
- */
-enum ethtool_sfeatures_retval_bits {
-	ETHTOOL_F_UNSUPPORTED__BIT,
-	ETHTOOL_F_WISH__BIT,
-	ETHTOOL_F_COMPAT__BIT,
-};
-
-#define ETHTOOL_F_UNSUPPORTED   (1 << ETHTOOL_F_UNSUPPORTED__BIT)
-#define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
-#define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
-
-#ifdef __KERNEL__
 
 #include <linux/rculist.h>
 
@@ -1049,277 +248,4 @@
 
 
 };
-#endif /* __KERNEL__ */
-
-/* CMDs currently supported */
-#define ETHTOOL_GSET		0x00000001 /* Get settings. */
-#define ETHTOOL_SSET		0x00000002 /* Set settings. */
-#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
-#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
-#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
-#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
-#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
-#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
-#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
-/* Get link status for host, i.e. whether the interface *and* the
- * physical port (if there is one) are up (ethtool_value). */
-#define ETHTOOL_GLINK		0x0000000a
-#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
-#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
-#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
-#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
-#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
-#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
-#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
-#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
-#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
-#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
-#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
-#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
-#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
-					    * (ethtool_value) */
-#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
-					    * (ethtool_value). */
-#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
-#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
-#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
-#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
-#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
-#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
-#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
-#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
-#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
-#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
-#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
-#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
-#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
-#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
-#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
-
-#define ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
-#define ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
-#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
-#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
-#define ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
-#define ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
-#define ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
-#define ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
-#define ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
-#define ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
-#define ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
-#define ETHTOOL_RESET		0x00000034 /* Reset hardware */
-#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
-#define ETHTOOL_GRXNTUPLE	0x00000036 /* deprecated */
-#define ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
-#define ETHTOOL_GRXFHINDIR	0x00000038 /* Get RX flow hash indir'n table */
-#define ETHTOOL_SRXFHINDIR	0x00000039 /* Set RX flow hash indir'n table */
-
-#define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
-#define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
-#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
-#define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
-#define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
-#define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
-#define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
-#define ETHTOOL_GET_TS_INFO	0x00000041 /* Get time stamping and PHC info */
-#define ETHTOOL_GMODULEINFO	0x00000042 /* Get plug-in module information */
-#define ETHTOOL_GMODULEEEPROM	0x00000043 /* Get plug-in module eeprom */
-#define ETHTOOL_GEEE		0x00000044 /* Get EEE settings */
-#define ETHTOOL_SEEE		0x00000045 /* Set EEE settings */
-
-/* compatibility with older code */
-#define SPARC_ETH_GSET		ETHTOOL_GSET
-#define SPARC_ETH_SSET		ETHTOOL_SSET
-
-/* Indicates what features are supported by the interface. */
-#define SUPPORTED_10baseT_Half		(1 << 0)
-#define SUPPORTED_10baseT_Full		(1 << 1)
-#define SUPPORTED_100baseT_Half		(1 << 2)
-#define SUPPORTED_100baseT_Full		(1 << 3)
-#define SUPPORTED_1000baseT_Half	(1 << 4)
-#define SUPPORTED_1000baseT_Full	(1 << 5)
-#define SUPPORTED_Autoneg		(1 << 6)
-#define SUPPORTED_TP			(1 << 7)
-#define SUPPORTED_AUI			(1 << 8)
-#define SUPPORTED_MII			(1 << 9)
-#define SUPPORTED_FIBRE			(1 << 10)
-#define SUPPORTED_BNC			(1 << 11)
-#define SUPPORTED_10000baseT_Full	(1 << 12)
-#define SUPPORTED_Pause			(1 << 13)
-#define SUPPORTED_Asym_Pause		(1 << 14)
-#define SUPPORTED_2500baseX_Full	(1 << 15)
-#define SUPPORTED_Backplane		(1 << 16)
-#define SUPPORTED_1000baseKX_Full	(1 << 17)
-#define SUPPORTED_10000baseKX4_Full	(1 << 18)
-#define SUPPORTED_10000baseKR_Full	(1 << 19)
-#define SUPPORTED_10000baseR_FEC	(1 << 20)
-#define SUPPORTED_20000baseMLD2_Full	(1 << 21)
-#define SUPPORTED_20000baseKR2_Full	(1 << 22)
-#define SUPPORTED_40000baseKR4_Full	(1 << 23)
-#define SUPPORTED_40000baseCR4_Full	(1 << 24)
-#define SUPPORTED_40000baseSR4_Full	(1 << 25)
-#define SUPPORTED_40000baseLR4_Full	(1 << 26)
-
-/* Indicates what features are advertised by the interface. */
-#define ADVERTISED_10baseT_Half		(1 << 0)
-#define ADVERTISED_10baseT_Full		(1 << 1)
-#define ADVERTISED_100baseT_Half	(1 << 2)
-#define ADVERTISED_100baseT_Full	(1 << 3)
-#define ADVERTISED_1000baseT_Half	(1 << 4)
-#define ADVERTISED_1000baseT_Full	(1 << 5)
-#define ADVERTISED_Autoneg		(1 << 6)
-#define ADVERTISED_TP			(1 << 7)
-#define ADVERTISED_AUI			(1 << 8)
-#define ADVERTISED_MII			(1 << 9)
-#define ADVERTISED_FIBRE		(1 << 10)
-#define ADVERTISED_BNC			(1 << 11)
-#define ADVERTISED_10000baseT_Full	(1 << 12)
-#define ADVERTISED_Pause		(1 << 13)
-#define ADVERTISED_Asym_Pause		(1 << 14)
-#define ADVERTISED_2500baseX_Full	(1 << 15)
-#define ADVERTISED_Backplane		(1 << 16)
-#define ADVERTISED_1000baseKX_Full	(1 << 17)
-#define ADVERTISED_10000baseKX4_Full	(1 << 18)
-#define ADVERTISED_10000baseKR_Full	(1 << 19)
-#define ADVERTISED_10000baseR_FEC	(1 << 20)
-#define ADVERTISED_20000baseMLD2_Full	(1 << 21)
-#define ADVERTISED_20000baseKR2_Full	(1 << 22)
-#define ADVERTISED_40000baseKR4_Full	(1 << 23)
-#define ADVERTISED_40000baseCR4_Full	(1 << 24)
-#define ADVERTISED_40000baseSR4_Full	(1 << 25)
-#define ADVERTISED_40000baseLR4_Full	(1 << 26)
-
-/* The following are all involved in forcing a particular link
- * mode for the device for setting things.  When getting the
- * devices settings, these indicate the current mode and whether
- * it was forced up into this mode or autonegotiated.
- */
-
-/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
-#define SPEED_10		10
-#define SPEED_100		100
-#define SPEED_1000		1000
-#define SPEED_2500		2500
-#define SPEED_10000		10000
-#define SPEED_UNKNOWN		-1
-
-/* Duplex, half or full. */
-#define DUPLEX_HALF		0x00
-#define DUPLEX_FULL		0x01
-#define DUPLEX_UNKNOWN		0xff
-
-/* Which connector port. */
-#define PORT_TP			0x00
-#define PORT_AUI		0x01
-#define PORT_MII		0x02
-#define PORT_FIBRE		0x03
-#define PORT_BNC		0x04
-#define PORT_DA			0x05
-#define PORT_NONE		0xef
-#define PORT_OTHER		0xff
-
-/* Which transceiver to use. */
-#define XCVR_INTERNAL		0x00
-#define XCVR_EXTERNAL		0x01
-#define XCVR_DUMMY1		0x02
-#define XCVR_DUMMY2		0x03
-#define XCVR_DUMMY3		0x04
-
-/* Enable or disable autonegotiation.  If this is set to enable,
- * the forced link modes above are completely ignored.
- */
-#define AUTONEG_DISABLE		0x00
-#define AUTONEG_ENABLE		0x01
-
-/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
- * the driver is required to renegotiate link
- */
-#define ETH_TP_MDI_INVALID	0x00 /* status: unknown; control: unsupported */
-#define ETH_TP_MDI		0x01 /* status: MDI;     control: force MDI */
-#define ETH_TP_MDI_X		0x02 /* status: MDI-X;   control: force MDI-X */
-#define ETH_TP_MDI_AUTO		0x03 /*                  control: auto-select */
-
-/* Wake-On-Lan options. */
-#define WAKE_PHY		(1 << 0)
-#define WAKE_UCAST		(1 << 1)
-#define WAKE_MCAST		(1 << 2)
-#define WAKE_BCAST		(1 << 3)
-#define WAKE_ARP		(1 << 4)
-#define WAKE_MAGIC		(1 << 5)
-#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
-
-/* L2-L4 network traffic flow types */
-#define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
-#define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
-#define	SCTP_V4_FLOW	0x03	/* hash or spec (sctp_ip4_spec) */
-#define	AH_ESP_V4_FLOW	0x04	/* hash only */
-#define	TCP_V6_FLOW	0x05	/* hash only */
-#define	UDP_V6_FLOW	0x06	/* hash only */
-#define	SCTP_V6_FLOW	0x07	/* hash only */
-#define	AH_ESP_V6_FLOW	0x08	/* hash only */
-#define	AH_V4_FLOW	0x09	/* hash or spec (ah_ip4_spec) */
-#define	ESP_V4_FLOW	0x0a	/* hash or spec (esp_ip4_spec) */
-#define	AH_V6_FLOW	0x0b	/* hash only */
-#define	ESP_V6_FLOW	0x0c	/* hash only */
-#define	IP_USER_FLOW	0x0d	/* spec only (usr_ip4_spec) */
-#define	IPV4_FLOW	0x10	/* hash only */
-#define	IPV6_FLOW	0x11	/* hash only */
-#define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
-/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
-#define	FLOW_EXT	0x80000000
-
-/* L3-L4 network traffic flow hash options */
-#define	RXH_L2DA	(1 << 1)
-#define	RXH_VLAN	(1 << 2)
-#define	RXH_L3_PROTO	(1 << 3)
-#define	RXH_IP_SRC	(1 << 4)
-#define	RXH_IP_DST	(1 << 5)
-#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
-#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
-#define	RXH_DISCARD	(1 << 31)
-
-#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
-
-/* Special RX classification rule insert location values */
-#define RX_CLS_LOC_SPECIAL	0x80000000	/* flag */
-#define RX_CLS_LOC_ANY		0xffffffff
-#define RX_CLS_LOC_FIRST	0xfffffffe
-#define RX_CLS_LOC_LAST		0xfffffffd
-
-/* EEPROM Standards for plug in modules */
-#define ETH_MODULE_SFF_8079		0x1
-#define ETH_MODULE_SFF_8079_LEN		256
-#define ETH_MODULE_SFF_8472		0x2
-#define ETH_MODULE_SFF_8472_LEN		512
-
-/* Reset flags */
-/* The reset() operation must clear the flags for the components which
- * were actually reset.  On successful return, the flags indicate the
- * components which were not reset, either because they do not exist
- * in the hardware or because they cannot be reset independently.  The
- * driver must never reset any components that were not requested.
- */
-enum ethtool_reset_flags {
-	/* These flags represent components dedicated to the interface
-	 * the command is addressed to.  Shift any flag left by
-	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
-	 * same type.
-	 */
-	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
-	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
-	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
-	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
-	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
-	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
-	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
-	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
-						 * multiple components */
-
-	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
-						 * this interface */
-	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
-						 * interface, even if shared */
-};
-#define ETH_RESET_SHARED_SHIFT	16
-
 #endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index 41085d0..6daf6d4 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -10,59 +10,11 @@
  *  Davide Libenzi <davidel@xmailserver.org>
  *
  */
-
 #ifndef _LINUX_EVENTPOLL_H
 #define _LINUX_EVENTPOLL_H
 
-/* For O_CLOEXEC */
-#include <linux/fcntl.h>
-#include <linux/types.h>
+#include <uapi/linux/eventpoll.h>
 
-/* Flags for epoll_create1.  */
-#define EPOLL_CLOEXEC O_CLOEXEC
-
-/* Valid opcodes to issue to sys_epoll_ctl() */
-#define EPOLL_CTL_ADD 1
-#define EPOLL_CTL_DEL 2
-#define EPOLL_CTL_MOD 3
-#define EPOLL_CTL_DISABLE 4
-
-/*
- * Request the handling of system wakeup events so as to prevent system suspends
- * from happening while those events are being processed.
- *
- * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be
- * re-allowed until epoll_wait is called again after consuming the wakeup
- * event(s).
- *
- * Requires CAP_BLOCK_SUSPEND
- */
-#define EPOLLWAKEUP (1 << 29)
-
-/* Set the One Shot behaviour for the target file descriptor */
-#define EPOLLONESHOT (1 << 30)
-
-/* Set the Edge Triggered behaviour for the target file descriptor */
-#define EPOLLET (1 << 31)
-
-/* 
- * On x86-64 make the 64bit structure have the same alignment as the
- * 32bit structure. This makes 32bit emulation easier.
- *
- * UML/x86_64 needs the same packing as x86_64
- */
-#ifdef __x86_64__
-#define EPOLL_PACKED __attribute__((packed))
-#else
-#define EPOLL_PACKED
-#endif
-
-struct epoll_event {
-	__u32 events;
-	__u64 data;
-} EPOLL_PACKED;
-
-#ifdef __KERNEL__
 
 /* Forward declarations to avoid compiler errors */
 struct file;
@@ -116,7 +68,4 @@
 
 #endif
 
-#endif /* #ifdef __KERNEL__ */
-
 #endif /* #ifndef _LINUX_EVENTPOLL_H */
-
diff --git a/include/linux/falloc.h b/include/linux/falloc.h
index d39b824..3159168 100644
--- a/include/linux/falloc.h
+++ b/include/linux/falloc.h
@@ -1,11 +1,8 @@
 #ifndef _FALLOC_H_
 #define _FALLOC_H_
 
-#define FALLOC_FL_KEEP_SIZE	0x01 /* default is extend size */
-#define FALLOC_FL_PUNCH_HOLE	0x02 /* de-allocates range */
-#define FALLOC_FL_NO_HIDE_STALE	0x04 /* reserved codepoint */
+#include <uapi/linux/falloc.h>
 
-#ifdef __KERNEL__
 
 /*
  * Space reservation ioctls and argument structure
@@ -24,6 +21,4 @@
 #define FS_IOC_RESVSP		_IOW('X', 40, struct space_resv)
 #define FS_IOC_RESVSP64		_IOW('X', 42, struct space_resv)
 
-#endif /* __KERNEL__ */
-
 #endif /* _FALLOC_H_ */
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 6c6133f..cef93dd 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -1,120 +1,8 @@
 #ifndef _LINUX_FANOTIFY_H
 #define _LINUX_FANOTIFY_H
 
-#include <linux/types.h>
+#include <uapi/linux/fanotify.h>
 
-/* the following events that user-space can register for */
-#define FAN_ACCESS		0x00000001	/* File was accessed */
-#define FAN_MODIFY		0x00000002	/* File was modified */
-#define FAN_CLOSE_WRITE		0x00000008	/* Writtable file closed */
-#define FAN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
-#define FAN_OPEN		0x00000020	/* File was opened */
-
-#define FAN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
-
-#define FAN_OPEN_PERM		0x00010000	/* File open in perm check */
-#define FAN_ACCESS_PERM		0x00020000	/* File accessed in perm check */
-
-#define FAN_ONDIR		0x40000000	/* event occurred against dir */
-
-#define FAN_EVENT_ON_CHILD	0x08000000	/* interested in child events */
-
-/* helper events */
-#define FAN_CLOSE		(FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
-
-/* flags used for fanotify_init() */
-#define FAN_CLOEXEC		0x00000001
-#define FAN_NONBLOCK		0x00000002
-
-/* These are NOT bitwise flags.  Both bits are used togther.  */
-#define FAN_CLASS_NOTIF		0x00000000
-#define FAN_CLASS_CONTENT	0x00000004
-#define FAN_CLASS_PRE_CONTENT	0x00000008
-#define FAN_ALL_CLASS_BITS	(FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \
-				 FAN_CLASS_PRE_CONTENT)
-
-#define FAN_UNLIMITED_QUEUE	0x00000010
-#define FAN_UNLIMITED_MARKS	0x00000020
-
-#define FAN_ALL_INIT_FLAGS	(FAN_CLOEXEC | FAN_NONBLOCK | \
-				 FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\
-				 FAN_UNLIMITED_MARKS)
-
-/* flags used for fanotify_modify_mark() */
-#define FAN_MARK_ADD		0x00000001
-#define FAN_MARK_REMOVE		0x00000002
-#define FAN_MARK_DONT_FOLLOW	0x00000004
-#define FAN_MARK_ONLYDIR	0x00000008
-#define FAN_MARK_MOUNT		0x00000010
-#define FAN_MARK_IGNORED_MASK	0x00000020
-#define FAN_MARK_IGNORED_SURV_MODIFY	0x00000040
-#define FAN_MARK_FLUSH		0x00000080
-#ifdef __KERNEL__
 /* not valid from userspace, only kernel internal */
 #define FAN_MARK_ONDIR		0x00000100
-#endif
-
-#define FAN_ALL_MARK_FLAGS	(FAN_MARK_ADD |\
-				 FAN_MARK_REMOVE |\
-				 FAN_MARK_DONT_FOLLOW |\
-				 FAN_MARK_ONLYDIR |\
-				 FAN_MARK_MOUNT |\
-				 FAN_MARK_IGNORED_MASK |\
-				 FAN_MARK_IGNORED_SURV_MODIFY |\
-				 FAN_MARK_FLUSH)
-
-/*
- * All of the events - we build the list by hand so that we can add flags in
- * the future and not break backward compatibility.  Apps will get only the
- * events that they originally wanted.  Be sure to add new events here!
- */
-#define FAN_ALL_EVENTS (FAN_ACCESS |\
-			FAN_MODIFY |\
-			FAN_CLOSE |\
-			FAN_OPEN)
-
-/*
- * All events which require a permission response from userspace
- */
-#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
-			     FAN_ACCESS_PERM)
-
-#define FAN_ALL_OUTGOING_EVENTS	(FAN_ALL_EVENTS |\
-				 FAN_ALL_PERM_EVENTS |\
-				 FAN_Q_OVERFLOW)
-
-#define FANOTIFY_METADATA_VERSION	3
-
-struct fanotify_event_metadata {
-	__u32 event_len;
-	__u8 vers;
-	__u8 reserved;
-	__u16 metadata_len;
-	__aligned_u64 mask;
-	__s32 fd;
-	__s32 pid;
-};
-
-struct fanotify_response {
-	__s32 fd;
-	__u32 response;
-};
-
-/* Legit userspace responses to a _PERM event */
-#define FAN_ALLOW	0x01
-#define FAN_DENY	0x02
-/* No fd set in event */
-#define FAN_NOFD	-1
-
-/* Helper functions to deal with fanotify_event_metadata buffers */
-#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
-
-#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
-				   (struct fanotify_event_metadata*)(((char *)(meta)) + \
-				   (meta)->event_len))
-
-#define FAN_EVENT_OK(meta, len)	((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
-				(long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
-				(long)(meta)->event_len <= (long)(len))
-
 #endif /* _LINUX_FANOTIFY_H */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index ac3f1c6..c7a9571 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1,409 +1,10 @@
 #ifndef _LINUX_FB_H
 #define _LINUX_FB_H
 
-#include <linux/types.h>
-#include <linux/i2c.h>
-#ifdef __KERNEL__
 #include <linux/kgdb.h>
-#endif /* __KERNEL__ */
+#include <uapi/linux/fb.h>
 
-/* Definitions of frame buffers						*/
-
-#define FB_MAX			32	/* sufficient for now */
-
-/* ioctls
-   0x46 is 'F'								*/
-#define FBIOGET_VSCREENINFO	0x4600
-#define FBIOPUT_VSCREENINFO	0x4601
-#define FBIOGET_FSCREENINFO	0x4602
-#define FBIOGETCMAP		0x4604
-#define FBIOPUTCMAP		0x4605
-#define FBIOPAN_DISPLAY		0x4606
-#ifdef __KERNEL__
 #define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor_user)
-#else
-#define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor)
-#endif
-/* 0x4607-0x460B are defined below */
-/* #define FBIOGET_MONITORSPEC	0x460C */
-/* #define FBIOPUT_MONITORSPEC	0x460D */
-/* #define FBIOSWITCH_MONIBIT	0x460E */
-#define FBIOGET_CON2FBMAP	0x460F
-#define FBIOPUT_CON2FBMAP	0x4610
-#define FBIOBLANK		0x4611		/* arg: 0 or vesa level + 1 */
-#define FBIOGET_VBLANK		_IOR('F', 0x12, struct fb_vblank)
-#define FBIO_ALLOC              0x4613
-#define FBIO_FREE               0x4614
-#define FBIOGET_GLYPH           0x4615
-#define FBIOGET_HWCINFO         0x4616
-#define FBIOPUT_MODEINFO        0x4617
-#define FBIOGET_DISPINFO        0x4618
-#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, __u32)
-
-#define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
-#define FB_TYPE_PLANES			1	/* Non interleaved planes */
-#define FB_TYPE_INTERLEAVED_PLANES	2	/* Interleaved planes	*/
-#define FB_TYPE_TEXT			3	/* Text/attributes	*/
-#define FB_TYPE_VGA_PLANES		4	/* EGA/VGA planes	*/
-#define FB_TYPE_FOURCC			5	/* Type identified by a V4L2 FOURCC */
-
-#define FB_AUX_TEXT_MDA		0	/* Monochrome text */
-#define FB_AUX_TEXT_CGA		1	/* CGA/EGA/VGA Color text */
-#define FB_AUX_TEXT_S3_MMIO	2	/* S3 MMIO fasttext */
-#define FB_AUX_TEXT_MGA_STEP16	3	/* MGA Millenium I: text, attr, 14 reserved bytes */
-#define FB_AUX_TEXT_MGA_STEP8	4	/* other MGAs:      text, attr,  6 reserved bytes */
-#define FB_AUX_TEXT_SVGA_GROUP	8	/* 8-15: SVGA tileblit compatible modes */
-#define FB_AUX_TEXT_SVGA_MASK	7	/* lower three bits says step */
-#define FB_AUX_TEXT_SVGA_STEP2	8	/* SVGA text mode:  text, attr */
-#define FB_AUX_TEXT_SVGA_STEP4	9	/* SVGA text mode:  text, attr,  2 reserved bytes */
-#define FB_AUX_TEXT_SVGA_STEP8	10	/* SVGA text mode:  text, attr,  6 reserved bytes */
-#define FB_AUX_TEXT_SVGA_STEP16	11	/* SVGA text mode:  text, attr, 14 reserved bytes */
-#define FB_AUX_TEXT_SVGA_LAST	15	/* reserved up to 15 */
-
-#define FB_AUX_VGA_PLANES_VGA4		0	/* 16 color planes (EGA/VGA) */
-#define FB_AUX_VGA_PLANES_CFB4		1	/* CFB4 in planes (VGA) */
-#define FB_AUX_VGA_PLANES_CFB8		2	/* CFB8 in planes (VGA) */
-
-#define FB_VISUAL_MONO01		0	/* Monochr. 1=Black 0=White */
-#define FB_VISUAL_MONO10		1	/* Monochr. 1=White 0=Black */
-#define FB_VISUAL_TRUECOLOR		2	/* True color	*/
-#define FB_VISUAL_PSEUDOCOLOR		3	/* Pseudo color (like atari) */
-#define FB_VISUAL_DIRECTCOLOR		4	/* Direct color */
-#define FB_VISUAL_STATIC_PSEUDOCOLOR	5	/* Pseudo color readonly */
-#define FB_VISUAL_FOURCC		6	/* Visual identified by a V4L2 FOURCC */
-
-#define FB_ACCEL_NONE		0	/* no hardware accelerator	*/
-#define FB_ACCEL_ATARIBLITT	1	/* Atari Blitter		*/
-#define FB_ACCEL_AMIGABLITT	2	/* Amiga Blitter                */
-#define FB_ACCEL_S3_TRIO64	3	/* Cybervision64 (S3 Trio64)    */
-#define FB_ACCEL_NCR_77C32BLT	4	/* RetinaZ3 (NCR 77C32BLT)      */
-#define FB_ACCEL_S3_VIRGE	5	/* Cybervision64/3D (S3 ViRGE)	*/
-#define FB_ACCEL_ATI_MACH64GX	6	/* ATI Mach 64GX family		*/
-#define FB_ACCEL_DEC_TGA	7	/* DEC 21030 TGA		*/
-#define FB_ACCEL_ATI_MACH64CT	8	/* ATI Mach 64CT family		*/
-#define FB_ACCEL_ATI_MACH64VT	9	/* ATI Mach 64CT family VT class */
-#define FB_ACCEL_ATI_MACH64GT	10	/* ATI Mach 64CT family GT class */
-#define FB_ACCEL_SUN_CREATOR	11	/* Sun Creator/Creator3D	*/
-#define FB_ACCEL_SUN_CGSIX	12	/* Sun cg6			*/
-#define FB_ACCEL_SUN_LEO	13	/* Sun leo/zx			*/
-#define FB_ACCEL_IMS_TWINTURBO	14	/* IMS Twin Turbo		*/
-#define FB_ACCEL_3DLABS_PERMEDIA2 15	/* 3Dlabs Permedia 2		*/
-#define FB_ACCEL_MATROX_MGA2064W 16	/* Matrox MGA2064W (Millenium)	*/
-#define FB_ACCEL_MATROX_MGA1064SG 17	/* Matrox MGA1064SG (Mystique)	*/
-#define FB_ACCEL_MATROX_MGA2164W 18	/* Matrox MGA2164W (Millenium II) */
-#define FB_ACCEL_MATROX_MGA2164W_AGP 19	/* Matrox MGA2164W (Millenium II) */
-#define FB_ACCEL_MATROX_MGAG100	20	/* Matrox G100 (Productiva G100) */
-#define FB_ACCEL_MATROX_MGAG200	21	/* Matrox G200 (Myst, Mill, ...) */
-#define FB_ACCEL_SUN_CG14	22	/* Sun cgfourteen		 */
-#define FB_ACCEL_SUN_BWTWO	23	/* Sun bwtwo			*/
-#define FB_ACCEL_SUN_CGTHREE	24	/* Sun cgthree			*/
-#define FB_ACCEL_SUN_TCX	25	/* Sun tcx			*/
-#define FB_ACCEL_MATROX_MGAG400	26	/* Matrox G400			*/
-#define FB_ACCEL_NV3		27	/* nVidia RIVA 128              */
-#define FB_ACCEL_NV4		28	/* nVidia RIVA TNT		*/
-#define FB_ACCEL_NV5		29	/* nVidia RIVA TNT2		*/
-#define FB_ACCEL_CT_6555x	30	/* C&T 6555x			*/
-#define FB_ACCEL_3DFX_BANSHEE	31	/* 3Dfx Banshee			*/
-#define FB_ACCEL_ATI_RAGE128	32	/* ATI Rage128 family		*/
-#define FB_ACCEL_IGS_CYBER2000	33	/* CyberPro 2000		*/
-#define FB_ACCEL_IGS_CYBER2010	34	/* CyberPro 2010		*/
-#define FB_ACCEL_IGS_CYBER5000	35	/* CyberPro 5000		*/
-#define FB_ACCEL_SIS_GLAMOUR    36	/* SiS 300/630/540              */
-#define FB_ACCEL_3DLABS_PERMEDIA3 37	/* 3Dlabs Permedia 3		*/
-#define FB_ACCEL_ATI_RADEON	38	/* ATI Radeon family		*/
-#define FB_ACCEL_I810           39      /* Intel 810/815                */
-#define FB_ACCEL_SIS_GLAMOUR_2  40	/* SiS 315, 650, 740		*/
-#define FB_ACCEL_SIS_XABRE      41	/* SiS 330 ("Xabre")		*/
-#define FB_ACCEL_I830           42      /* Intel 830M/845G/85x/865G     */
-#define FB_ACCEL_NV_10          43      /* nVidia Arch 10               */
-#define FB_ACCEL_NV_20          44      /* nVidia Arch 20               */
-#define FB_ACCEL_NV_30          45      /* nVidia Arch 30               */
-#define FB_ACCEL_NV_40          46      /* nVidia Arch 40               */
-#define FB_ACCEL_XGI_VOLARI_V	47	/* XGI Volari V3XT, V5, V8      */
-#define FB_ACCEL_XGI_VOLARI_Z	48	/* XGI Volari Z7                */
-#define FB_ACCEL_OMAP1610	49	/* TI OMAP16xx                  */
-#define FB_ACCEL_TRIDENT_TGUI	50	/* Trident TGUI			*/
-#define FB_ACCEL_TRIDENT_3DIMAGE 51	/* Trident 3DImage		*/
-#define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
-#define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
-#define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
-#define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
-#define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
-#define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
-#define FB_ACCEL_NEOMAGIC_NM2097 93	/* NeoMagic NM2097              */
-#define FB_ACCEL_NEOMAGIC_NM2160 94	/* NeoMagic NM2160              */
-#define FB_ACCEL_NEOMAGIC_NM2200 95	/* NeoMagic NM2200              */
-#define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
-#define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
-#define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
-#define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
-
-#define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
-#define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
-#define FB_ACCEL_SAVAGE3D_MV    0x82	/* S3 Savage3D-MV               */
-#define FB_ACCEL_SAVAGE2000     0x83	/* S3 Savage2000                */
-#define FB_ACCEL_SAVAGE_MX_MV   0x84	/* S3 Savage/MX-MV              */
-#define FB_ACCEL_SAVAGE_MX      0x85	/* S3 Savage/MX                 */
-#define FB_ACCEL_SAVAGE_IX_MV   0x86	/* S3 Savage/IX-MV              */
-#define FB_ACCEL_SAVAGE_IX      0x87	/* S3 Savage/IX                 */
-#define FB_ACCEL_PROSAVAGE_PM   0x88	/* S3 ProSavage PM133           */
-#define FB_ACCEL_PROSAVAGE_KM   0x89	/* S3 ProSavage KM133           */
-#define FB_ACCEL_S3TWISTER_P    0x8a	/* S3 Twister                   */
-#define FB_ACCEL_S3TWISTER_K    0x8b	/* S3 TwisterK                  */
-#define FB_ACCEL_SUPERSAVAGE    0x8c    /* S3 Supersavage               */
-#define FB_ACCEL_PROSAVAGE_DDR  0x8d	/* S3 ProSavage DDR             */
-#define FB_ACCEL_PROSAVAGE_DDRK 0x8e	/* S3 ProSavage DDR-K           */
-
-#define FB_ACCEL_PUV3_UNIGFX	0xa0	/* PKUnity-v3 Unigfx		*/
-
-#define FB_CAP_FOURCC		1	/* Device supports FOURCC-based formats */
-
-struct fb_fix_screeninfo {
-	char id[16];			/* identification string eg "TT Builtin" */
-	unsigned long smem_start;	/* Start of frame buffer mem */
-					/* (physical address) */
-	__u32 smem_len;			/* Length of frame buffer mem */
-	__u32 type;			/* see FB_TYPE_*		*/
-	__u32 type_aux;			/* Interleave for interleaved Planes */
-	__u32 visual;			/* see FB_VISUAL_*		*/ 
-	__u16 xpanstep;			/* zero if no hardware panning  */
-	__u16 ypanstep;			/* zero if no hardware panning  */
-	__u16 ywrapstep;		/* zero if no hardware ywrap    */
-	__u32 line_length;		/* length of a line in bytes    */
-	unsigned long mmio_start;	/* Start of Memory Mapped I/O   */
-					/* (physical address) */
-	__u32 mmio_len;			/* Length of Memory Mapped I/O  */
-	__u32 accel;			/* Indicate to driver which	*/
-					/*  specific chip/card we have	*/
-	__u16 capabilities;		/* see FB_CAP_*			*/
-	__u16 reserved[2];		/* Reserved for future compatibility */
-};
-
-/* Interpretation of offset for color fields: All offsets are from the right,
- * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
- * can use the offset as right argument to <<). A pixel afterwards is a bit
- * stream and is written to video memory as that unmodified.
- *
- * For pseudocolor: offset and length should be the same for all color
- * components. Offset specifies the position of the least significant bit
- * of the pallette index in a pixel value. Length indicates the number
- * of available palette entries (i.e. # of entries = 1 << length).
- */
-struct fb_bitfield {
-	__u32 offset;			/* beginning of bitfield	*/
-	__u32 length;			/* length of bitfield		*/
-	__u32 msb_right;		/* != 0 : Most significant bit is */ 
-					/* right */ 
-};
-
-#define FB_NONSTD_HAM		1	/* Hold-And-Modify (HAM)        */
-#define FB_NONSTD_REV_PIX_IN_B	2	/* order of pixels in each byte is reversed */
-
-#define FB_ACTIVATE_NOW		0	/* set values immediately (or vbl)*/
-#define FB_ACTIVATE_NXTOPEN	1	/* activate on next open	*/
-#define FB_ACTIVATE_TEST	2	/* don't set, round up impossible */
-#define FB_ACTIVATE_MASK       15
-					/* values			*/
-#define FB_ACTIVATE_VBL	       16	/* activate values on next vbl  */
-#define FB_CHANGE_CMAP_VBL     32	/* change colormap on vbl	*/
-#define FB_ACTIVATE_ALL	       64	/* change all VCs on this fb	*/
-#define FB_ACTIVATE_FORCE     128	/* force apply even when no change*/
-#define FB_ACTIVATE_INV_MODE  256       /* invalidate videomode */
-
-#define FB_ACCELF_TEXT		1	/* (OBSOLETE) see fb_info.flags and vc_mode */
-
-#define FB_SYNC_HOR_HIGH_ACT	1	/* horizontal sync high active	*/
-#define FB_SYNC_VERT_HIGH_ACT	2	/* vertical sync high active	*/
-#define FB_SYNC_EXT		4	/* external sync		*/
-#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active   */
-#define FB_SYNC_BROADCAST	16	/* broadcast video timings      */
-					/* vtotal = 144d/288n/576i => PAL  */
-					/* vtotal = 121d/242n/484i => NTSC */
-#define FB_SYNC_ON_GREEN	32	/* sync on green */
-
-#define FB_VMODE_NONINTERLACED  0	/* non interlaced */
-#define FB_VMODE_INTERLACED	1	/* interlaced	*/
-#define FB_VMODE_DOUBLE		2	/* double scan */
-#define FB_VMODE_ODD_FLD_FIRST	4	/* interlaced: top line first */
-#define FB_VMODE_MASK		255
-
-#define FB_VMODE_YWRAP		256	/* ywrap instead of panning     */
-#define FB_VMODE_SMOOTH_XPAN	512	/* smooth xpan possible (internally used) */
-#define FB_VMODE_CONUPDATE	512	/* don't update x/yoffset	*/
-
-/*
- * Display rotation support
- */
-#define FB_ROTATE_UR      0
-#define FB_ROTATE_CW      1
-#define FB_ROTATE_UD      2
-#define FB_ROTATE_CCW     3
-
-#define PICOS2KHZ(a) (1000000000UL/(a))
-#define KHZ2PICOS(a) (1000000000UL/(a))
-
-struct fb_var_screeninfo {
-	__u32 xres;			/* visible resolution		*/
-	__u32 yres;
-	__u32 xres_virtual;		/* virtual resolution		*/
-	__u32 yres_virtual;
-	__u32 xoffset;			/* offset from virtual to visible */
-	__u32 yoffset;			/* resolution			*/
-
-	__u32 bits_per_pixel;		/* guess what			*/
-	__u32 grayscale;		/* 0 = color, 1 = grayscale,	*/
-					/* >1 = FOURCC			*/
-	struct fb_bitfield red;		/* bitfield in fb mem if true color, */
-	struct fb_bitfield green;	/* else only length is significant */
-	struct fb_bitfield blue;
-	struct fb_bitfield transp;	/* transparency			*/	
-
-	__u32 nonstd;			/* != 0 Non standard pixel format */
-
-	__u32 activate;			/* see FB_ACTIVATE_*		*/
-
-	__u32 height;			/* height of picture in mm    */
-	__u32 width;			/* width of picture in mm     */
-
-	__u32 accel_flags;		/* (OBSOLETE) see fb_info.flags */
-
-	/* Timing: All values in pixclocks, except pixclock (of course) */
-	__u32 pixclock;			/* pixel clock in ps (pico seconds) */
-	__u32 left_margin;		/* time from sync to picture	*/
-	__u32 right_margin;		/* time from picture to sync	*/
-	__u32 upper_margin;		/* time from sync to picture	*/
-	__u32 lower_margin;
-	__u32 hsync_len;		/* length of horizontal sync	*/
-	__u32 vsync_len;		/* length of vertical sync	*/
-	__u32 sync;			/* see FB_SYNC_*		*/
-	__u32 vmode;			/* see FB_VMODE_*		*/
-	__u32 rotate;			/* angle we rotate counter clockwise */
-	__u32 colorspace;		/* colorspace for FOURCC-based modes */
-	__u32 reserved[4];		/* Reserved for future compatibility */
-};
-
-struct fb_cmap {
-	__u32 start;			/* First entry	*/
-	__u32 len;			/* Number of entries */
-	__u16 *red;			/* Red values	*/
-	__u16 *green;
-	__u16 *blue;
-	__u16 *transp;			/* transparency, can be NULL */
-};
-
-struct fb_con2fbmap {
-	__u32 console;
-	__u32 framebuffer;
-};
-
-/* VESA Blanking Levels */
-#define VESA_NO_BLANKING        0
-#define VESA_VSYNC_SUSPEND      1
-#define VESA_HSYNC_SUSPEND      2
-#define VESA_POWERDOWN          3
-
-
-enum {
-	/* screen: unblanked, hsync: on,  vsync: on */
-	FB_BLANK_UNBLANK       = VESA_NO_BLANKING,
-
-	/* screen: blanked,   hsync: on,  vsync: on */
-	FB_BLANK_NORMAL        = VESA_NO_BLANKING + 1,
-
-	/* screen: blanked,   hsync: on,  vsync: off */
-	FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
-
-	/* screen: blanked,   hsync: off, vsync: on */
-	FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
-
-	/* screen: blanked,   hsync: off, vsync: off */
-	FB_BLANK_POWERDOWN     = VESA_POWERDOWN + 1
-};
-
-#define FB_VBLANK_VBLANKING	0x001	/* currently in a vertical blank */
-#define FB_VBLANK_HBLANKING	0x002	/* currently in a horizontal blank */
-#define FB_VBLANK_HAVE_VBLANK	0x004	/* vertical blanks can be detected */
-#define FB_VBLANK_HAVE_HBLANK	0x008	/* horizontal blanks can be detected */
-#define FB_VBLANK_HAVE_COUNT	0x010	/* global retrace counter is available */
-#define FB_VBLANK_HAVE_VCOUNT	0x020	/* the vcount field is valid */
-#define FB_VBLANK_HAVE_HCOUNT	0x040	/* the hcount field is valid */
-#define FB_VBLANK_VSYNCING	0x080	/* currently in a vsync */
-#define FB_VBLANK_HAVE_VSYNC	0x100	/* verical syncs can be detected */
-
-struct fb_vblank {
-	__u32 flags;			/* FB_VBLANK flags */
-	__u32 count;			/* counter of retraces since boot */
-	__u32 vcount;			/* current scanline position */
-	__u32 hcount;			/* current scandot position */
-	__u32 reserved[4];		/* reserved for future compatibility */
-};
-
-/* Internal HW accel */
-#define ROP_COPY 0
-#define ROP_XOR  1
-
-struct fb_copyarea {
-	__u32 dx;
-	__u32 dy;
-	__u32 width;
-	__u32 height;
-	__u32 sx;
-	__u32 sy;
-};
-
-struct fb_fillrect {
-	__u32 dx;	/* screen-relative */
-	__u32 dy;
-	__u32 width;
-	__u32 height;
-	__u32 color;
-	__u32 rop;
-};
-
-struct fb_image {
-	__u32 dx;		/* Where to place image */
-	__u32 dy;
-	__u32 width;		/* Size of image */
-	__u32 height;
-	__u32 fg_color;		/* Only used when a mono bitmap */
-	__u32 bg_color;
-	__u8  depth;		/* Depth of the image */
-	const char *data;	/* Pointer to image data */
-	struct fb_cmap cmap;	/* color map info */
-};
-
-/*
- * hardware cursor control
- */
-
-#define FB_CUR_SETIMAGE 0x01
-#define FB_CUR_SETPOS   0x02
-#define FB_CUR_SETHOT   0x04
-#define FB_CUR_SETCMAP  0x08
-#define FB_CUR_SETSHAPE 0x10
-#define FB_CUR_SETSIZE	0x20
-#define FB_CUR_SETALL   0xFF
-
-struct fbcurpos {
-	__u16 x, y;
-};
-
-struct fb_cursor {
-	__u16 set;		/* what to set */
-	__u16 enable;		/* cursor on/off */
-	__u16 rop;		/* bitop operation */
-	const char *mask;	/* cursor mask bits */
-	struct fbcurpos hot;	/* cursor hot spot */
-	struct fb_image	image;	/* Cursor image */
-};
-
-#ifdef CONFIG_FB_BACKLIGHT
-/* Settings for the generic backlight code */
-#define FB_BACKLIGHT_LEVELS	128
-#define FB_BACKLIGHT_MAX	0xFF
-#endif
-
-#ifdef __KERNEL__
 
 #include <linux/fs.h>
 #include <linux/init.h>
@@ -1181,6 +782,4 @@
 			const struct fb_videomode *default_mode,
 			unsigned int default_bpp);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_FB_H */
diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h
index f550f89..76ce329 100644
--- a/include/linux/fcntl.h
+++ b/include/linux/fcntl.h
@@ -1,54 +1,8 @@
 #ifndef _LINUX_FCNTL_H
 #define _LINUX_FCNTL_H
 
-#include <asm/fcntl.h>
+#include <uapi/linux/fcntl.h>
 
-#define F_SETLEASE	(F_LINUX_SPECIFIC_BASE + 0)
-#define F_GETLEASE	(F_LINUX_SPECIFIC_BASE + 1)
-
-/*
- * Cancel a blocking posix lock; internal use only until we expose an
- * asynchronous lock api to userspace:
- */
-#define F_CANCELLK	(F_LINUX_SPECIFIC_BASE + 5)
-
-/* Create a file descriptor with FD_CLOEXEC set. */
-#define F_DUPFD_CLOEXEC	(F_LINUX_SPECIFIC_BASE + 6)
-
-/*
- * Request nofications on a directory.
- * See below for events that may be notified.
- */
-#define F_NOTIFY	(F_LINUX_SPECIFIC_BASE+2)
-
-/*
- * Set and get of pipe page size array
- */
-#define F_SETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 7)
-#define F_GETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 8)
-
-/*
- * Types of directory notifications that may be requested.
- */
-#define DN_ACCESS	0x00000001	/* File accessed */
-#define DN_MODIFY	0x00000002	/* File modified */
-#define DN_CREATE	0x00000004	/* File created */
-#define DN_DELETE	0x00000008	/* File removed */
-#define DN_RENAME	0x00000010	/* File renamed */
-#define DN_ATTRIB	0x00000020	/* File changed attibutes */
-#define DN_MULTISHOT	0x80000000	/* Don't remove notifier */
-
-#define AT_FDCWD		-100    /* Special value used to indicate
-                                           openat should use the current
-                                           working directory. */
-#define AT_SYMLINK_NOFOLLOW	0x100   /* Do not follow symbolic links.  */
-#define AT_REMOVEDIR		0x200   /* Remove directory instead of
-                                           unlinking file.  */
-#define AT_SYMLINK_FOLLOW	0x400   /* Follow symbolic links.  */
-#define AT_NO_AUTOMOUNT		0x800	/* Suppress terminal automount traversal */
-#define AT_EMPTY_PATH		0x1000	/* Allow empty relative pathname */
-
-#ifdef __KERNEL__
 
 #ifndef force_o_largefile
 #define force_o_largefile() (BITS_PER_LONG != 32)
@@ -74,6 +28,4 @@
 #define IS_SETLK(cmd)	(IS_SETLK32(cmd)  || IS_SETLK64(cmd))
 #define IS_SETLKW(cmd)	(IS_SETLKW32(cmd) || IS_SETLKW64(cmd))
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/fd.h b/include/linux/fd.h
index 72202b1..69275bc 100644
--- a/include/linux/fd.h
+++ b/include/linux/fd.h
@@ -1,384 +1,8 @@
 #ifndef _LINUX_FD_H
 #define _LINUX_FD_H
 
-#include <linux/ioctl.h>
-#include <linux/compiler.h>
+#include <uapi/linux/fd.h>
 
-/* New file layout: Now the ioctl definitions immediately follow the
- * definitions of the structures that they use */
-
-/*
- * Geometry
- */
-struct floppy_struct {
-	unsigned int	size,		/* nr of sectors total */
-			sect,		/* sectors per track */
-			head,		/* nr of heads */
-			track,		/* nr of tracks */
-			stretch;	/* bit 0 !=0 means double track steps */
-					/* bit 1 != 0 means swap sides */
-					/* bits 2..9 give the first sector */
-					/*  number (the LSB is flipped) */
-#define FD_STRETCH 1
-#define FD_SWAPSIDES 2
-#define FD_ZEROBASED 4
-#define FD_SECTBASEMASK 0x3FC
-#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
-#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
-
-	unsigned char	gap,		/* gap1 size */
-
-			rate,		/* data rate. |= 0x40 for perpendicular */
-#define FD_2M 0x4
-#define FD_SIZECODEMASK 0x38
-#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
-#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
-			     512 : 128 << FD_SIZECODE(floppy) )
-#define FD_PERP 0x40
-
-			spec1,		/* stepping rate, head unload time */
-			fmt_gap;	/* gap2 size */
-	const char	* name; /* used only for predefined formats */
-};
-
-
-/* commands needing write access have 0x40 set */
-/* commands needing super user access have 0x80 set */
-
-#define FDCLRPRM _IO(2, 0x41)
-/* clear user-defined parameters */
-
-#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 
-#define FDSETMEDIAPRM FDSETPRM
-/* set user-defined parameters for current media */
-
-#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 
-#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
-#define FDDEFMEDIAPRM FDDEFPRM
-#define FDGETMEDIAPRM FDGETPRM
-/* set/get disk parameters */
-
-
-#define	FDMSGON  _IO(2,0x45)
-#define	FDMSGOFF _IO(2,0x46)
-/* issue/don't issue kernel messages on media type change */
-
-
-/* 
- * Formatting (obsolete)
- */
-#define FD_FILL_BYTE 0xF6 /* format fill byte. */
-
-struct format_descr {
-	unsigned int device,head,track;
-};
-
-#define FDFMTBEG _IO(2,0x47)
-/* begin formatting a disk */
-#define	FDFMTTRK _IOW(2,0x48, struct format_descr)
-/* format the specified track */
-#define FDFMTEND _IO(2,0x49)
-/* end formatting a disk */
-
-
-/*
- * Error thresholds
- */
-struct floppy_max_errors {
-	unsigned int
-	  abort,      /* number of errors to be reached before aborting */
-	  read_track, /* maximal number of errors permitted to read an
-		       * entire track at once */
-	  reset,      /* maximal number of errors before a reset is tried */
-	  recal,      /* maximal number of errors before a recalibrate is
-		       * tried */
-
-	  /*
-	   * Threshold for reporting FDC errors to the console.
-	   * Setting this to zero may flood your screen when using
-	   * ultra cheap floppies ;-)
-	   */
-	  reporting;
-
-};
-
-#define FDSETEMSGTRESH	_IO(2,0x4a)
-/* set fdc error reporting threshold */
-
-#define FDFLUSH  _IO(2,0x4b)
-/* flush buffers for media; either for verifying media, or for
- * handling a media change without closing the file descriptor */
-
-#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
-#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
-/* set/get abortion and read_track threshold. See also floppy_drive_params
- * structure */
-
-
-typedef char floppy_drive_name[16];
-#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
-/* get drive type: 5 1/4 or 3 1/2 */
-
-
-/*
- * Drive parameters (user modifiable)
- */
-struct floppy_drive_params {
-	signed char cmos;		/* CMOS type */
-	
-	/* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms 
-	 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
-	 */
-	unsigned long max_dtr;		/* Step rate, usec */
-	unsigned long hlt;     		/* Head load/settle time, msec */
-	unsigned long hut;     		/* Head unload time (remnant of 
-					 * 8" drives) */
-	unsigned long srt;     		/* Step rate, usec */
-
-	unsigned long spinup;		/* time needed for spinup (expressed
-					 * in jiffies) */
-	unsigned long spindown;		/* timeout needed for spindown */
-	unsigned char spindown_offset;	/* decides in which position the disk
-					 * will stop */
-	unsigned char select_delay;	/* delay to wait after select */
-	unsigned char rps;		/* rotations per second */
-	unsigned char tracks;		/* maximum number of tracks */
-	unsigned long timeout;		/* timeout for interrupt requests */
-	
-	unsigned char interleave_sect;	/* if there are more sectors, use 
-					 * interleave */
-	
-	struct floppy_max_errors max_errors;
-	
-	char flags;			/* various flags, including ftd_msg */
-/*
- * Announce successful media type detection and media information loss after
- * disk changes.
- * Also used to enable/disable printing of overrun warnings.
- */
-
-#define FTD_MSG 0x10
-#define FD_BROKEN_DCL 0x20
-#define FD_DEBUG 0x02
-#define FD_SILENT_DCL_CLEAR 0x4
-#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware 
-				considerations */
-
-	char read_track;		/* use readtrack during probing? */
-
-/*
- * Auto-detection. Each drive type has eight formats which are
- * used in succession to try to read the disk. If the FDC cannot lock onto
- * the disk, the next format is tried. This uses the variable 'probing'.
- */
-	short autodetect[8];		/* autodetected formats */
-	
-	int checkfreq; /* how often should the drive be checked for disk 
-			* changes */
-	int native_format; /* native format of this drive */
-};
-
-enum {
-	FD_NEED_TWADDLE_BIT,	/* more magic */
-	FD_VERIFY_BIT,		/* inquire for write protection */
-	FD_DISK_NEWCHANGE_BIT,	/* change detected, and no action undertaken yet
-				 * to clear media change status */
-	FD_UNUSED_BIT,
-	FD_DISK_CHANGED_BIT,	/* disk has been changed since last i/o */
-	FD_DISK_WRITABLE_BIT	/* disk is writable */
-};
-
-#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
-#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
-/* set/get drive parameters */
-
-
-/*
- * Current drive state (not directly modifiable by user, readonly)
- */
-struct floppy_drive_struct {
-	unsigned long flags;
-/* values for these flags */
-#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
-#define FD_VERIFY (1 << FD_VERIFY_BIT)
-#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
-#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
-#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
-
-	unsigned long spinup_date;
-	unsigned long select_date;
-	unsigned long first_read_date;
-	short probed_format;
-	short track; /* current track */
-	short maxblock; /* id of highest block read */
-	short maxtrack; /* id of highest half track read */
-	int generation; /* how many diskchanges? */
-
-/*
- * (User-provided) media information is _not_ discarded after a media change
- * if the corresponding keep_data flag is non-zero. Positive values are
- * decremented after each probe.
- */
-	int keep_data;
-	
-	/* Prevent "aliased" accesses. */
-	int fd_ref;
-	int fd_device;
-	unsigned long last_checked; /* when was the drive last checked for a disk 
-			   * change? */
-	
-	char *dmabuf;
-	int bufblocks;
-};
-
-#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
-#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
-/* get drive state: GET returns the cached state, POLL polls for new state */
-
-
-/*
- * reset FDC
- */
-enum reset_mode {
-	FD_RESET_IF_NEEDED,	/* reset only if the reset flags is set */
-	FD_RESET_IF_RAWCMD,	/* obsolete */
-	FD_RESET_ALWAYS		/* reset always */
-};
-#define FDRESET _IO(2, 0x54)
-
-
-/*
- * FDC state
- */
-struct floppy_fdc_state {	
-	int spec1;		/* spec1 value last used */
-	int spec2;		/* spec2 value last used */
-	int dtr;
-	unsigned char version;	/* FDC version code */
-	unsigned char dor;
-	unsigned long address;	/* io address */
-	unsigned int rawcmd:2;
-	unsigned int reset:1;
-	unsigned int need_configure:1;
-	unsigned int perp_mode:2;
-	unsigned int has_fifo:1;
-	unsigned int driver_version;	/* version code for floppy driver */
-#define FD_DRIVER_VERSION 0x100
-/* user programs using the floppy API should use floppy_fdc_state to
- * get the version number of the floppy driver that they are running
- * on. If this version number is bigger than the one compiled into the
- * user program (the FD_DRIVER_VERSION define), it should be prepared
- * to bigger structures
- */
-
-	unsigned char track[4];
-	/* Position of the heads of the 4 units attached to this FDC,
-	 * as stored on the FDC. In the future, the position as stored
-	 * on the FDC might not agree with the actual physical
-	 * position of these drive heads. By allowing such
-	 * disagreement, it will be possible to reset the FDC without
-	 * incurring the expensive cost of repositioning all heads.
-	 * Right now, these positions are hard wired to 0. */
-
-};
-
-#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
-
-
-/*
- * Asynchronous Write error tracking
- */
-struct floppy_write_errors {
-	/* Write error logging.
-	 *
-	 * These fields can be cleared with the FDWERRORCLR ioctl.
-	 * Only writes that were attempted but failed due to a physical media
-	 * error are logged.  write(2) calls that fail and return an error code
-	 * to the user process are not counted.
-	 */
-
-	unsigned int write_errors;  /* number of physical write errors 
-				     * encountered */
-	
-	/* position of first and last write errors */
-	unsigned long first_error_sector;
-	int           first_error_generation;
-	unsigned long last_error_sector;
-	int           last_error_generation;
-	
-	unsigned int badness; /* highest retry count for a read or write 
-			       * operation */
-};
-
-#define FDWERRORCLR  _IO(2, 0x56)
-/* clear write error and badness information */
-#define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)
-/* get write error and badness information */
-
-
-/*
- * Raw commands
- */
-/* new interface flag: now we can do them in batches */
-#define FDHAVEBATCHEDRAWCMD
-
-struct floppy_raw_cmd {
-	unsigned int flags;
-#define FD_RAW_READ 1
-#define FD_RAW_WRITE 2
-#define FD_RAW_NO_MOTOR 4
-#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
-#define FD_RAW_INTR 8    /* wait for an interrupt */
-#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
-#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 
-				    * completion */
-#define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */
-#define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */
-
-/* more "in" flags */
-#define FD_RAW_MORE 0x100  /* more records follow */
-#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
-#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
-#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
-				  * detection too */
-
-/* more "out" flags */
-#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
-#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
-
-	void __user *data;
-	char *kernel_data; /* location of data buffer in the kernel */
-	struct floppy_raw_cmd *next; /* used for chaining of raw cmd's 
-				      * within the kernel */
-	long length; /* in: length of dma transfer. out: remaining bytes */
-	long phys_length; /* physical length, if different from dma length */
-	int buffer_length; /* length of allocated buffer */
-
-	unsigned char rate;
-	unsigned char cmd_count;
-	unsigned char cmd[16];
-	unsigned char reply_count;
-	unsigned char reply[16];
-	int track;
-	int resultcode;
-
-	int reserved1;
-	int reserved2;
-};
-
-#define FDRAWCMD _IO(2, 0x58)
-/* send a raw command to the fdc. Structure size not included, because of
- * batches */
-
-#define FDTWADDLE _IO(2, 0x59)
-/* flicker motor-on bit before reading a sector. Experimental */
-
-
-#define FDEJECT _IO(2, 0x5a)
-/* eject the disk */
-
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
 
@@ -398,5 +22,3 @@
 #define FDGETPRM32 _IOR(2, 0x04, struct compat_floppy_struct)
 #endif
 #endif
-
-#endif
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 2ded090..24d251f 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -1,141 +1,12 @@
 /*
  * Linux Socket Filter Data Structures
  */
-
 #ifndef __LINUX_FILTER_H__
 #define __LINUX_FILTER_H__
 
-#include <linux/compiler.h>
-#include <linux/types.h>
-
-#ifdef __KERNEL__
 #include <linux/atomic.h>
 #include <linux/compat.h>
-#endif
-
-/*
- * Current version of the filter code architecture.
- */
-#define BPF_MAJOR_VERSION 1
-#define BPF_MINOR_VERSION 1
-
-/*
- *	Try and keep these values and structures similar to BSD, especially
- *	the BPF code definitions which need to match so you can share filters
- */
- 
-struct sock_filter {	/* Filter block */
-	__u16	code;   /* Actual filter code */
-	__u8	jt;	/* Jump true */
-	__u8	jf;	/* Jump false */
-	__u32	k;      /* Generic multiuse field */
-};
-
-struct sock_fprog {	/* Required for SO_ATTACH_FILTER. */
-	unsigned short		len;	/* Number of filter blocks */
-	struct sock_filter __user *filter;
-};
-
-/*
- * Instruction classes
- */
-
-#define BPF_CLASS(code) ((code) & 0x07)
-#define         BPF_LD          0x00
-#define         BPF_LDX         0x01
-#define         BPF_ST          0x02
-#define         BPF_STX         0x03
-#define         BPF_ALU         0x04
-#define         BPF_JMP         0x05
-#define         BPF_RET         0x06
-#define         BPF_MISC        0x07
-
-/* ld/ldx fields */
-#define BPF_SIZE(code)  ((code) & 0x18)
-#define         BPF_W           0x00
-#define         BPF_H           0x08
-#define         BPF_B           0x10
-#define BPF_MODE(code)  ((code) & 0xe0)
-#define         BPF_IMM         0x00
-#define         BPF_ABS         0x20
-#define         BPF_IND         0x40
-#define         BPF_MEM         0x60
-#define         BPF_LEN         0x80
-#define         BPF_MSH         0xa0
-
-/* alu/jmp fields */
-#define BPF_OP(code)    ((code) & 0xf0)
-#define         BPF_ADD         0x00
-#define         BPF_SUB         0x10
-#define         BPF_MUL         0x20
-#define         BPF_DIV         0x30
-#define         BPF_OR          0x40
-#define         BPF_AND         0x50
-#define         BPF_LSH         0x60
-#define         BPF_RSH         0x70
-#define         BPF_NEG         0x80
-#define		BPF_MOD		0x90
-#define		BPF_XOR		0xa0
-
-#define         BPF_JA          0x00
-#define         BPF_JEQ         0x10
-#define         BPF_JGT         0x20
-#define         BPF_JGE         0x30
-#define         BPF_JSET        0x40
-#define BPF_SRC(code)   ((code) & 0x08)
-#define         BPF_K           0x00
-#define         BPF_X           0x08
-
-/* ret - BPF_K and BPF_X also apply */
-#define BPF_RVAL(code)  ((code) & 0x18)
-#define         BPF_A           0x10
-
-/* misc */
-#define BPF_MISCOP(code) ((code) & 0xf8)
-#define         BPF_TAX         0x00
-#define         BPF_TXA         0x80
-
-#ifndef BPF_MAXINSNS
-#define BPF_MAXINSNS 4096
-#endif
-
-/*
- * Macros for filter block array initializers.
- */
-#ifndef BPF_STMT
-#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
-#endif
-#ifndef BPF_JUMP
-#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
-#endif
-
-/*
- * Number of scratch memory words for: BPF_ST and BPF_STX
- */
-#define BPF_MEMWORDS 16
-
-/* RATIONALE. Negative offsets are invalid in BPF.
-   We use them to reference ancillary data.
-   Unlike introduction new instructions, it does not break
-   existing compilers/optimizers.
- */
-#define SKF_AD_OFF    (-0x1000)
-#define SKF_AD_PROTOCOL 0
-#define SKF_AD_PKTTYPE 	4
-#define SKF_AD_IFINDEX 	8
-#define SKF_AD_NLATTR	12
-#define SKF_AD_NLATTR_NEST	16
-#define SKF_AD_MARK 	20
-#define SKF_AD_QUEUE	24
-#define SKF_AD_HATYPE	28
-#define SKF_AD_RXHASH	32
-#define SKF_AD_CPU	36
-#define SKF_AD_ALU_XOR_X	40
-#define SKF_AD_MAX	44
-#define SKF_NET_OFF   (-0x100000)
-#define SKF_LL_OFF    (-0x200000)
-
-#ifdef __KERNEL__
+#include <uapi/linux/filter.h>
 
 #ifdef CONFIG_COMPAT
 /*
@@ -254,6 +125,4 @@
 	BPF_S_ANC_SECCOMP_LD_W,
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* __LINUX_FILTER_H__ */
diff --git a/include/linux/flat.h b/include/linux/flat.h
index ec56852..2c1eb15 100644
--- a/include/linux/flat.h
+++ b/include/linux/flat.h
@@ -6,58 +6,12 @@
  * This file provides the definitions and structures needed to
  * support uClinux flat-format executables.
  */
-
 #ifndef _LINUX_FLAT_H
 #define _LINUX_FLAT_H
 
-#ifdef __KERNEL__
 #include <asm/flat.h>
-#endif
+#include <uapi/linux/flat.h>
 
-#define	FLAT_VERSION			0x00000004L
-
-#ifdef CONFIG_BINFMT_SHARED_FLAT
-#define	MAX_SHARED_LIBS			(4)
-#else
-#define	MAX_SHARED_LIBS			(1)
-#endif
-
-/*
- * To make everything easier to port and manage cross platform
- * development,  all fields are in network byte order.
- */
-
-struct flat_hdr {
-	char magic[4];
-	unsigned long rev;          /* version (as above) */
-	unsigned long entry;        /* Offset of first executable instruction
-	                               with text segment from beginning of file */
-	unsigned long data_start;   /* Offset of data segment from beginning of
-	                               file */
-	unsigned long data_end;     /* Offset of end of data segment
-	                               from beginning of file */
-	unsigned long bss_end;      /* Offset of end of bss segment from beginning
-	                               of file */
-
-	/* (It is assumed that data_end through bss_end forms the bss segment.) */
-
-	unsigned long stack_size;   /* Size of stack, in bytes */
-	unsigned long reloc_start;  /* Offset of relocation records from
-	                               beginning of file */
-	unsigned long reloc_count;  /* Number of relocation records */
-	unsigned long flags;       
-	unsigned long build_date;   /* When the program/library was built */
-	unsigned long filler[5];    /* Reservered, set to zero */
-};
-
-#define FLAT_FLAG_RAM    0x0001 /* load program entirely into RAM */
-#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
-#define FLAT_FLAG_GZIP   0x0004 /* all but the header is compressed */
-#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
-#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
-
-
-#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */
 /*
  * While it would be nice to keep this header clean,  users of older
  * tools still need this support in the kernel.  So this section is
@@ -95,6 +49,4 @@
 	} reloc;
 } flat_v2_reloc_t;
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_FLAT_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 8ef2fc9..001c7cf 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1,121 +1,68 @@
 #ifndef _LINUX_FS_H
 #define _LINUX_FS_H
 
-/*
- * This file has definitions for some important file table
- * structures etc.
- */
 
-#include <linux/limits.h>
-#include <linux/ioctl.h>
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/kdev_t.h>
+#include <linux/dcache.h>
+#include <linux/path.h>
+#include <linux/stat.h>
+#include <linux/cache.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
+#include <linux/rbtree.h>
+#include <linux/init.h>
+#include <linux/pid.h>
+#include <linux/bug.h>
+#include <linux/mutex.h>
+#include <linux/capability.h>
+#include <linux/semaphore.h>
+#include <linux/fiemap.h>
+#include <linux/rculist_bl.h>
+#include <linux/atomic.h>
+#include <linux/shrinker.h>
+#include <linux/migrate_mode.h>
+#include <linux/uidgid.h>
+#include <linux/lockdep.h>
+#include <linux/percpu-rwsem.h>
 #include <linux/blk_types.h>
-#include <linux/types.h>
 
-/*
- * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
- * the file limit at runtime and only root can increase the per-process
- * nr_file rlimit, so it's safe to set up a ridiculously high absolute
- * upper limit on files-per-process.
- *
- * Some programs (notably those using select()) may have to be 
- * recompiled to take full advantage of the new limits..  
- */
+#include <asm/byteorder.h>
+#include <uapi/linux/fs.h>
 
-/* Fixed constants first: */
-#undef NR_OPEN
-#define INR_OPEN_CUR 1024	/* Initial setting for nfile rlimits */
-#define INR_OPEN_MAX 4096	/* Hard limit for nfile rlimits */
+struct export_operations;
+struct hd_geometry;
+struct iovec;
+struct nameidata;
+struct kiocb;
+struct kobject;
+struct pipe_inode_info;
+struct poll_table_struct;
+struct kstatfs;
+struct vm_area_struct;
+struct vfsmount;
+struct cred;
+struct swap_info_struct;
 
-#define BLOCK_SIZE_BITS 10
-#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
+extern void __init inode_init(void);
+extern void __init inode_init_early(void);
+extern void __init files_init(unsigned long);
 
-#define SEEK_SET	0	/* seek relative to beginning of file */
-#define SEEK_CUR	1	/* seek relative to current file position */
-#define SEEK_END	2	/* seek relative to end of file */
-#define SEEK_DATA	3	/* seek to the next data */
-#define SEEK_HOLE	4	/* seek to the next hole */
-#define SEEK_MAX	SEEK_HOLE
+extern struct files_stat_struct files_stat;
+extern unsigned long get_max_files(void);
+extern int sysctl_nr_open;
+extern struct inodes_stat_t inodes_stat;
+extern int leases_enable, lease_break_time;
+extern int sysctl_protected_symlinks;
+extern int sysctl_protected_hardlinks;
 
-struct fstrim_range {
-	__u64 start;
-	__u64 len;
-	__u64 minlen;
-};
-
-/* And dynamically-tunable limits and defaults: */
-struct files_stat_struct {
-	unsigned long nr_files;		/* read only */
-	unsigned long nr_free_files;	/* read only */
-	unsigned long max_files;		/* tunable */
-};
-
-struct inodes_stat_t {
-	int nr_inodes;
-	int nr_unused;
-	int dummy[5];		/* padding for sysctl ABI compatibility */
-};
-
-
-#define NR_FILE  8192	/* this can well be larger on a larger system */
-
-#define MAY_EXEC		0x00000001
-#define MAY_WRITE		0x00000002
-#define MAY_READ		0x00000004
-#define MAY_APPEND		0x00000008
-#define MAY_ACCESS		0x00000010
-#define MAY_OPEN		0x00000020
-#define MAY_CHDIR		0x00000040
-/* called from RCU mode, don't block */
-#define MAY_NOT_BLOCK		0x00000080
-
-/*
- * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
- * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
- */
-
-/* file is open for reading */
-#define FMODE_READ		((__force fmode_t)0x1)
-/* file is open for writing */
-#define FMODE_WRITE		((__force fmode_t)0x2)
-/* file is seekable */
-#define FMODE_LSEEK		((__force fmode_t)0x4)
-/* file can be accessed using pread */
-#define FMODE_PREAD		((__force fmode_t)0x8)
-/* file can be accessed using pwrite */
-#define FMODE_PWRITE		((__force fmode_t)0x10)
-/* File is opened for execution with sys_execve / sys_uselib */
-#define FMODE_EXEC		((__force fmode_t)0x20)
-/* File is opened with O_NDELAY (only set for block devices) */
-#define FMODE_NDELAY		((__force fmode_t)0x40)
-/* File is opened with O_EXCL (only set for block devices) */
-#define FMODE_EXCL		((__force fmode_t)0x80)
-/* File is opened using open(.., 3, ..) and is writeable only for ioctls
-   (specialy hack for floppy.c) */
-#define FMODE_WRITE_IOCTL	((__force fmode_t)0x100)
-/* 32bit hashes as llseek() offset (for directories) */
-#define FMODE_32BITHASH         ((__force fmode_t)0x200)
-/* 64bit hashes as llseek() offset (for directories) */
-#define FMODE_64BITHASH         ((__force fmode_t)0x400)
-
-/*
- * Don't update ctime and mtime.
- *
- * Currently a special hack for the XFS open_by_handle ioctl, but we'll
- * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
- */
-#define FMODE_NOCMTIME		((__force fmode_t)0x800)
-
-/* Expect random access pattern */
-#define FMODE_RANDOM		((__force fmode_t)0x1000)
-
-/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
-#define FMODE_UNSIGNED_OFFSET	((__force fmode_t)0x2000)
-
-/* File is opened with O_PATH; almost nothing can be done with it */
-#define FMODE_PATH		((__force fmode_t)0x4000)
-
-/* File was opened by fanotify and shouldn't generate fanotify events */
-#define FMODE_NONOTIFY		((__force fmode_t)0x1000000)
+struct buffer_head;
+typedef int (get_block_t)(struct inode *inode, sector_t iblock,
+			struct buffer_head *bh_result, int create);
+typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
+			ssize_t bytes, void *private, int ret,
+			bool is_async);
 
 /*
  * The below are the various read and write types that we support. Some of
@@ -175,284 +122,6 @@
 #define WRITE_FUA		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
 #define WRITE_FLUSH_FUA		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
 
-
-/*
- * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
- * that indicates that they should check the contents of the iovec are
- * valid, but not check the memory that the iovec elements
- * points too.
- */
-#define CHECK_IOVEC_ONLY -1
-
-#define SEL_IN		1
-#define SEL_OUT		2
-#define SEL_EX		4
-
-/* public flags for file_system_type */
-#define FS_REQUIRES_DEV 1 
-#define FS_BINARY_MOUNTDATA 2
-#define FS_HAS_SUBTYPE 4
-#define FS_REVAL_DOT	16384	/* Check the paths ".", ".." for staleness */
-#define FS_RENAME_DOES_D_MOVE	32768	/* FS will handle d_move()
-					 * during rename() internally.
-					 */
-
-/*
- * These are the fs-independent mount-flags: up to 32 flags are supported
- */
-#define MS_RDONLY	 1	/* Mount read-only */
-#define MS_NOSUID	 2	/* Ignore suid and sgid bits */
-#define MS_NODEV	 4	/* Disallow access to device special files */
-#define MS_NOEXEC	 8	/* Disallow program execution */
-#define MS_SYNCHRONOUS	16	/* Writes are synced at once */
-#define MS_REMOUNT	32	/* Alter flags of a mounted FS */
-#define MS_MANDLOCK	64	/* Allow mandatory locks on an FS */
-#define MS_DIRSYNC	128	/* Directory modifications are synchronous */
-#define MS_NOATIME	1024	/* Do not update access times. */
-#define MS_NODIRATIME	2048	/* Do not update directory access times */
-#define MS_BIND		4096
-#define MS_MOVE		8192
-#define MS_REC		16384
-#define MS_VERBOSE	32768	/* War is peace. Verbosity is silence.
-				   MS_VERBOSE is deprecated. */
-#define MS_SILENT	32768
-#define MS_POSIXACL	(1<<16)	/* VFS does not apply the umask */
-#define MS_UNBINDABLE	(1<<17)	/* change to unbindable */
-#define MS_PRIVATE	(1<<18)	/* change to private */
-#define MS_SLAVE	(1<<19)	/* change to slave */
-#define MS_SHARED	(1<<20)	/* change to shared */
-#define MS_RELATIME	(1<<21)	/* Update atime relative to mtime/ctime. */
-#define MS_KERNMOUNT	(1<<22) /* this is a kern_mount call */
-#define MS_I_VERSION	(1<<23) /* Update inode I_version field */
-#define MS_STRICTATIME	(1<<24) /* Always perform atime updates */
-#define MS_NOSEC	(1<<28)
-#define MS_BORN		(1<<29)
-#define MS_ACTIVE	(1<<30)
-#define MS_NOUSER	(1<<31)
-
-/*
- * Superblock flags that can be altered by MS_REMOUNT
- */
-#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
-
-/*
- * Old magic mount flag and mask
- */
-#define MS_MGC_VAL 0xC0ED0000
-#define MS_MGC_MSK 0xffff0000
-
-/* Inode flags - they have nothing to superblock flags now */
-
-#define S_SYNC		1	/* Writes are synced at once */
-#define S_NOATIME	2	/* Do not update access times */
-#define S_APPEND	4	/* Append-only file */
-#define S_IMMUTABLE	8	/* Immutable file */
-#define S_DEAD		16	/* removed, but still open directory */
-#define S_NOQUOTA	32	/* Inode is not counted to quota */
-#define S_DIRSYNC	64	/* Directory modifications are synchronous */
-#define S_NOCMTIME	128	/* Do not update file c/mtime */
-#define S_SWAPFILE	256	/* Do not truncate: swapon got its bmaps */
-#define S_PRIVATE	512	/* Inode is fs-internal */
-#define S_IMA		1024	/* Inode has an associated IMA struct */
-#define S_AUTOMOUNT	2048	/* Automount/referral quasi-directory */
-#define S_NOSEC		4096	/* no suid or xattr security attributes */
-
-/*
- * Note that nosuid etc flags are inode-specific: setting some file-system
- * flags just means all the inodes inherit those flags by default. It might be
- * possible to override it selectively if you really wanted to with some
- * ioctl() that is not currently implemented.
- *
- * Exception: MS_RDONLY is always applied to the entire file system.
- *
- * Unfortunately, it is possible to change a filesystems flags with it mounted
- * with files in use.  This means that all of the inodes will not have their
- * i_flags updated.  Hence, i_flags no longer inherit the superblock mount
- * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
- */
-#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
-
-#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
-#define IS_SYNC(inode)		(__IS_FLG(inode, MS_SYNCHRONOUS) || \
-					((inode)->i_flags & S_SYNC))
-#define IS_DIRSYNC(inode)	(__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
-					((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
-#define IS_MANDLOCK(inode)	__IS_FLG(inode, MS_MANDLOCK)
-#define IS_NOATIME(inode)   __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
-#define IS_I_VERSION(inode)   __IS_FLG(inode, MS_I_VERSION)
-
-#define IS_NOQUOTA(inode)	((inode)->i_flags & S_NOQUOTA)
-#define IS_APPEND(inode)	((inode)->i_flags & S_APPEND)
-#define IS_IMMUTABLE(inode)	((inode)->i_flags & S_IMMUTABLE)
-#define IS_POSIXACL(inode)	__IS_FLG(inode, MS_POSIXACL)
-
-#define IS_DEADDIR(inode)	((inode)->i_flags & S_DEAD)
-#define IS_NOCMTIME(inode)	((inode)->i_flags & S_NOCMTIME)
-#define IS_SWAPFILE(inode)	((inode)->i_flags & S_SWAPFILE)
-#define IS_PRIVATE(inode)	((inode)->i_flags & S_PRIVATE)
-#define IS_IMA(inode)		((inode)->i_flags & S_IMA)
-#define IS_AUTOMOUNT(inode)	((inode)->i_flags & S_AUTOMOUNT)
-#define IS_NOSEC(inode)		((inode)->i_flags & S_NOSEC)
-
-/* the read-only stuff doesn't really belong here, but any other place is
-   probably as bad and I don't want to create yet another include file. */
-
-#define BLKROSET   _IO(0x12,93)	/* set device read-only (0 = read-write) */
-#define BLKROGET   _IO(0x12,94)	/* get read-only status (0 = read_write) */
-#define BLKRRPART  _IO(0x12,95)	/* re-read partition table */
-#define BLKGETSIZE _IO(0x12,96)	/* return device size /512 (long *arg) */
-#define BLKFLSBUF  _IO(0x12,97)	/* flush buffer cache */
-#define BLKRASET   _IO(0x12,98)	/* set read ahead for block device */
-#define BLKRAGET   _IO(0x12,99)	/* get current read ahead setting */
-#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
-#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
-#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
-#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
-#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */
-#if 0
-#define BLKPG      _IO(0x12,105)/* See blkpg.h */
-
-/* Some people are morons.  Do not use sizeof! */
-
-#define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */
-#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set */
-/* This was here just to show that the number is taken -
-   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
-#endif
-/* A jump here: 108-111 have been used for various private purposes. */
-#define BLKBSZGET  _IOR(0x12,112,size_t)
-#define BLKBSZSET  _IOW(0x12,113,size_t)
-#define BLKGETSIZE64 _IOR(0x12,114,size_t)	/* return device size in bytes (u64 *arg) */
-#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
-#define BLKTRACESTART _IO(0x12,116)
-#define BLKTRACESTOP _IO(0x12,117)
-#define BLKTRACETEARDOWN _IO(0x12,118)
-#define BLKDISCARD _IO(0x12,119)
-#define BLKIOMIN _IO(0x12,120)
-#define BLKIOOPT _IO(0x12,121)
-#define BLKALIGNOFF _IO(0x12,122)
-#define BLKPBSZGET _IO(0x12,123)
-#define BLKDISCARDZEROES _IO(0x12,124)
-#define BLKSECDISCARD _IO(0x12,125)
-#define BLKROTATIONAL _IO(0x12,126)
-#define BLKZEROOUT _IO(0x12,127)
-
-#define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
-#define FIBMAP	   _IO(0x00,1)	/* bmap access */
-#define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
-#define FIFREEZE	_IOWR('X', 119, int)	/* Freeze */
-#define FITHAW		_IOWR('X', 120, int)	/* Thaw */
-#define FITRIM		_IOWR('X', 121, struct fstrim_range)	/* Trim */
-
-#define	FS_IOC_GETFLAGS			_IOR('f', 1, long)
-#define	FS_IOC_SETFLAGS			_IOW('f', 2, long)
-#define	FS_IOC_GETVERSION		_IOR('v', 1, long)
-#define	FS_IOC_SETVERSION		_IOW('v', 2, long)
-#define FS_IOC_FIEMAP			_IOWR('f', 11, struct fiemap)
-#define FS_IOC32_GETFLAGS		_IOR('f', 1, int)
-#define FS_IOC32_SETFLAGS		_IOW('f', 2, int)
-#define FS_IOC32_GETVERSION		_IOR('v', 1, int)
-#define FS_IOC32_SETVERSION		_IOW('v', 2, int)
-
-/*
- * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
- */
-#define	FS_SECRM_FL			0x00000001 /* Secure deletion */
-#define	FS_UNRM_FL			0x00000002 /* Undelete */
-#define	FS_COMPR_FL			0x00000004 /* Compress file */
-#define FS_SYNC_FL			0x00000008 /* Synchronous updates */
-#define FS_IMMUTABLE_FL			0x00000010 /* Immutable file */
-#define FS_APPEND_FL			0x00000020 /* writes to file may only append */
-#define FS_NODUMP_FL			0x00000040 /* do not dump file */
-#define FS_NOATIME_FL			0x00000080 /* do not update atime */
-/* Reserved for compression usage... */
-#define FS_DIRTY_FL			0x00000100
-#define FS_COMPRBLK_FL			0x00000200 /* One or more compressed clusters */
-#define FS_NOCOMP_FL			0x00000400 /* Don't compress */
-#define FS_ECOMPR_FL			0x00000800 /* Compression error */
-/* End compression flags --- maybe not all used */
-#define FS_BTREE_FL			0x00001000 /* btree format dir */
-#define FS_INDEX_FL			0x00001000 /* hash-indexed directory */
-#define FS_IMAGIC_FL			0x00002000 /* AFS directory */
-#define FS_JOURNAL_DATA_FL		0x00004000 /* Reserved for ext3 */
-#define FS_NOTAIL_FL			0x00008000 /* file tail should not be merged */
-#define FS_DIRSYNC_FL			0x00010000 /* dirsync behaviour (directories only) */
-#define FS_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
-#define FS_EXTENT_FL			0x00080000 /* Extents */
-#define FS_DIRECTIO_FL			0x00100000 /* Use direct i/o */
-#define FS_NOCOW_FL			0x00800000 /* Do not cow file */
-#define FS_RESERVED_FL			0x80000000 /* reserved for ext2 lib */
-
-#define FS_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
-#define FS_FL_USER_MODIFIABLE		0x000380FF /* User modifiable flags */
-
-
-#define SYNC_FILE_RANGE_WAIT_BEFORE	1
-#define SYNC_FILE_RANGE_WRITE		2
-#define SYNC_FILE_RANGE_WAIT_AFTER	4
-
-#ifdef __KERNEL__
-
-#include <linux/linkage.h>
-#include <linux/wait.h>
-#include <linux/kdev_t.h>
-#include <linux/dcache.h>
-#include <linux/path.h>
-#include <linux/stat.h>
-#include <linux/cache.h>
-#include <linux/list.h>
-#include <linux/radix-tree.h>
-#include <linux/rbtree.h>
-#include <linux/init.h>
-#include <linux/pid.h>
-#include <linux/bug.h>
-#include <linux/mutex.h>
-#include <linux/capability.h>
-#include <linux/semaphore.h>
-#include <linux/fiemap.h>
-#include <linux/rculist_bl.h>
-#include <linux/atomic.h>
-#include <linux/shrinker.h>
-#include <linux/migrate_mode.h>
-#include <linux/uidgid.h>
-#include <linux/lockdep.h>
-#include <linux/percpu-rwsem.h>
-
-#include <asm/byteorder.h>
-
-struct export_operations;
-struct hd_geometry;
-struct iovec;
-struct nameidata;
-struct kiocb;
-struct kobject;
-struct pipe_inode_info;
-struct poll_table_struct;
-struct kstatfs;
-struct vm_area_struct;
-struct vfsmount;
-struct cred;
-struct swap_info_struct;
-
-extern void __init inode_init(void);
-extern void __init inode_init_early(void);
-extern void __init files_init(unsigned long);
-
-extern struct files_stat_struct files_stat;
-extern unsigned long get_max_files(void);
-extern int sysctl_nr_open;
-extern struct inodes_stat_t inodes_stat;
-extern int leases_enable, lease_break_time;
-extern int sysctl_protected_symlinks;
-extern int sysctl_protected_hardlinks;
-
-struct buffer_head;
-typedef int (get_block_t)(struct inode *inode, sector_t iblock,
-			struct buffer_head *bh_result, int create);
-typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
-			ssize_t bytes, void *private, int ret,
-			bool is_async);
-
 /*
  * Attribute flags.  These should be or-ed together to figure out what
  * has been changed!
@@ -2196,6 +1865,13 @@
 #endif /* CONFIG_FILE_LOCKING */
 
 /* fs/open.c */
+struct audit_names;
+struct filename {
+	const char		*name;	/* pointer to actual string */
+	const __user char	*uptr;	/* original userland pointer */
+	struct audit_names	*aname;
+	bool			separate; /* should "name" be freed? */
+};
 
 extern int do_truncate(struct dentry *, loff_t start, unsigned int time_attrs,
 		       struct file *filp);
@@ -2203,12 +1879,15 @@
 			loff_t len);
 extern long do_sys_open(int dfd, const char __user *filename, int flags,
 			umode_t mode);
+extern struct file *file_open_name(struct filename *, int, umode_t);
 extern struct file *filp_open(const char *, int, umode_t);
 extern struct file *file_open_root(struct dentry *, struct vfsmount *,
 				   const char *, int);
 extern struct file * dentry_open(const struct path *, int, const struct cred *);
 extern int filp_close(struct file *, fl_owner_t id);
-extern char * getname(const char __user *);
+
+extern struct filename *getname(const char __user *);
+
 enum {
 	FILE_CREATED = 1,
 	FILE_OPENED = 2
@@ -2228,13 +1907,14 @@
 
 extern struct kmem_cache *names_cachep;
 
-#define __getname_gfp(gfp)	kmem_cache_alloc(names_cachep, (gfp))
-#define __getname()		__getname_gfp(GFP_KERNEL)
+extern void final_putname(struct filename *name);
+
+#define __getname()		kmem_cache_alloc(names_cachep, GFP_KERNEL)
 #define __putname(name)		kmem_cache_free(names_cachep, (void *)(name))
 #ifndef CONFIG_AUDITSYSCALL
-#define putname(name)   __putname(name)
+#define putname(name)		final_putname(name)
 #else
-extern void putname(const char *name);
+extern void putname(struct filename *name);
 #endif
 
 #ifdef CONFIG_BLOCK
@@ -2866,5 +2546,4 @@
 		inode->i_flags |= S_NOSEC;
 }
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_FS_H */
diff --git a/include/linux/fsl_hypervisor.h b/include/linux/fsl_hypervisor.h
index 1cebaee..2a707d7 100644
--- a/include/linux/fsl_hypervisor.h
+++ b/include/linux/fsl_hypervisor.h
@@ -36,187 +36,11 @@
  * also be included by applications that need to communicate with the driver
  * via the ioctl interface.
  */
-
 #ifndef FSL_HYPERVISOR_H
 #define FSL_HYPERVISOR_H
 
-#include <linux/types.h>
+#include <uapi/linux/fsl_hypervisor.h>
 
-/**
- * struct fsl_hv_ioctl_restart - restart a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to restart, or -1 for the
- *             calling partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_RESTART
- */
-struct fsl_hv_ioctl_restart {
-	__u32 ret;
-	__u32 partition;
-};
-
-/**
- * struct fsl_hv_ioctl_status - get a partition's status
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to query, or -1 for the
- *             calling partition
- * @status: The returned status of the partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS
- *
- * Values of 'status':
- *    0 = Stopped
- *    1 = Running
- *    2 = Starting
- *    3 = Stopping
- */
-struct fsl_hv_ioctl_status {
-	__u32 ret;
-	__u32 partition;
-	__u32 status;
-};
-
-/**
- * struct fsl_hv_ioctl_start - start a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to control
- * @entry_point: The offset within the guest IMA to start execution
- * @load: If non-zero, reload the partition's images before starting
- *
- * Used by FSL_HV_IOCTL_PARTITION_START
- */
-struct fsl_hv_ioctl_start {
-	__u32 ret;
-	__u32 partition;
-	__u32 entry_point;
-	__u32 load;
-};
-
-/**
- * struct fsl_hv_ioctl_stop - stop a partition
- * @ret: return error code from the hypervisor
- * @partition: the ID of the partition to stop, or -1 for the calling
- *             partition
- *
- * Used by FSL_HV_IOCTL_PARTITION_STOP
- */
-struct fsl_hv_ioctl_stop {
-	__u32 ret;
-	__u32 partition;
-};
-
-/**
- * struct fsl_hv_ioctl_memcpy - copy memory between partitions
- * @ret: return error code from the hypervisor
- * @source: the partition ID of the source partition, or -1 for this
- *          partition
- * @target: the partition ID of the target partition, or -1 for this
- *          partition
- * @reserved: reserved, must be set to 0
- * @local_addr: user-space virtual address of a buffer in the local
- *              partition
- * @remote_addr: guest physical address of a buffer in the
- *           remote partition
- * @count: the number of bytes to copy.  Both the local and remote
- *         buffers must be at least 'count' bytes long
- *
- * Used by FSL_HV_IOCTL_MEMCPY
- *
- * The 'local' partition is the partition that calls this ioctl.  The
- * 'remote' partition is a different partition.  The data is copied from
- * the 'source' paritition' to the 'target' partition.
- *
- * The buffer in the remote partition must be guest physically
- * contiguous.
- *
- * This ioctl does not support copying memory between two remote
- * partitions or within the same partition, so either 'source' or
- * 'target' (but not both) must be -1.  In other words, either
- *
- *      source == local and target == remote
- * or
- *      source == remote and target == local
- */
-struct fsl_hv_ioctl_memcpy {
-	__u32 ret;
-	__u32 source;
-	__u32 target;
-	__u32 reserved;	/* padding to ensure local_vaddr is aligned */
-	__u64 local_vaddr;
-	__u64 remote_paddr;
-	__u64 count;
-};
-
-/**
- * struct fsl_hv_ioctl_doorbell - ring a doorbell
- * @ret: return error code from the hypervisor
- * @doorbell: the handle of the doorbell to ring doorbell
- *
- * Used by FSL_HV_IOCTL_DOORBELL
- */
-struct fsl_hv_ioctl_doorbell {
-	__u32 ret;
-	__u32 doorbell;
-};
-
-/**
- * struct fsl_hv_ioctl_prop - get/set a device tree property
- * @ret: return error code from the hypervisor
- * @handle: handle of partition whose tree to access
- * @path: virtual address of path name of node to access
- * @propname: virtual address of name of property to access
- * @propval: virtual address of property data buffer
- * @proplen: Size of property data buffer
- * @reserved: reserved, must be set to 0
- *
- * Used by FSL_HV_IOCTL_DOORBELL
- */
-struct fsl_hv_ioctl_prop {
-	__u32 ret;
-	__u32 handle;
-	__u64 path;
-	__u64 propname;
-	__u64 propval;
-	__u32 proplen;
-	__u32 reserved;	/* padding to ensure structure is aligned */
-};
-
-/* The ioctl type, documented in ioctl-number.txt */
-#define FSL_HV_IOCTL_TYPE	0xAF
-
-/* Restart another partition */
-#define FSL_HV_IOCTL_PARTITION_RESTART \
-	_IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart)
-
-/* Get a partition's status */
-#define FSL_HV_IOCTL_PARTITION_GET_STATUS \
-	_IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status)
-
-/* Boot another partition */
-#define FSL_HV_IOCTL_PARTITION_START \
-	_IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start)
-
-/* Stop this or another partition */
-#define FSL_HV_IOCTL_PARTITION_STOP \
-	_IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop)
-
-/* Copy data from one partition to another */
-#define FSL_HV_IOCTL_MEMCPY \
-	_IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy)
-
-/* Ring a doorbell */
-#define FSL_HV_IOCTL_DOORBELL \
-	_IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell)
-
-/* Get a property from another guest's device tree */
-#define FSL_HV_IOCTL_GETPROP \
-	_IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop)
-
-/* Set a property in another guest's device tree */
-#define FSL_HV_IOCTL_SETPROP \
-	_IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop)
-
-#ifdef __KERNEL__
 
 /**
  * fsl_hv_event_register() - register a callback for failover events
@@ -237,5 +61,3 @@
 int fsl_hv_failover_unregister(struct notifier_block *nb);
 
 #endif
-
-#endif
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index a6dfe69..0fbfb46 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -109,7 +109,7 @@
 
 	if (source)
 		fsnotify(source, FS_MOVE_SELF, moved->d_inode, FSNOTIFY_EVENT_INODE, NULL, 0);
-	audit_inode_child(moved, new_dir);
+	audit_inode_child(new_dir, moved, AUDIT_TYPE_CHILD_CREATE);
 }
 
 /*
@@ -155,7 +155,7 @@
  */
 static inline void fsnotify_create(struct inode *inode, struct dentry *dentry)
 {
-	audit_inode_child(dentry, inode);
+	audit_inode_child(inode, dentry, AUDIT_TYPE_CHILD_CREATE);
 
 	fsnotify(inode, FS_CREATE, dentry->d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
 }
@@ -168,7 +168,7 @@
 static inline void fsnotify_link(struct inode *dir, struct inode *inode, struct dentry *new_dentry)
 {
 	fsnotify_link_count(inode);
-	audit_inode_child(new_dentry, dir);
+	audit_inode_child(dir, new_dentry, AUDIT_TYPE_CHILD_CREATE);
 
 	fsnotify(dir, FS_CREATE, inode, FSNOTIFY_EVENT_INODE, new_dentry->d_name.name, 0);
 }
@@ -181,7 +181,7 @@
 	__u32 mask = (FS_CREATE | FS_ISDIR);
 	struct inode *d_inode = dentry->d_inode;
 
-	audit_inode_child(dentry, inode);
+	audit_inode_child(inode, dentry, AUDIT_TYPE_CHILD_CREATE);
 
 	fsnotify(inode, mask, d_inode, FSNOTIFY_EVENT_INODE, dentry->d_name.name, 0);
 }
diff --git a/include/linux/futex.h b/include/linux/futex.h
index 1e5a26d..b0d95ca 100644
--- a/include/linux/futex.h
+++ b/include/linux/futex.h
@@ -1,129 +1,8 @@
 #ifndef _LINUX_FUTEX_H
 #define _LINUX_FUTEX_H
 
-#include <linux/compiler.h>
-#include <linux/types.h>
+#include <uapi/linux/futex.h>
 
-/* Second argument to futex syscall */
-
-
-#define FUTEX_WAIT		0
-#define FUTEX_WAKE		1
-#define FUTEX_FD		2
-#define FUTEX_REQUEUE		3
-#define FUTEX_CMP_REQUEUE	4
-#define FUTEX_WAKE_OP		5
-#define FUTEX_LOCK_PI		6
-#define FUTEX_UNLOCK_PI		7
-#define FUTEX_TRYLOCK_PI	8
-#define FUTEX_WAIT_BITSET	9
-#define FUTEX_WAKE_BITSET	10
-#define FUTEX_WAIT_REQUEUE_PI	11
-#define FUTEX_CMP_REQUEUE_PI	12
-
-#define FUTEX_PRIVATE_FLAG	128
-#define FUTEX_CLOCK_REALTIME	256
-#define FUTEX_CMD_MASK		~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME)
-
-#define FUTEX_WAIT_PRIVATE	(FUTEX_WAIT | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_PRIVATE	(FUTEX_WAKE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_REQUEUE_PRIVATE	(FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_OP_PRIVATE	(FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
-#define FUTEX_LOCK_PI_PRIVATE	(FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_UNLOCK_PI_PRIVATE	(FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_BITSET_PRIVATE	(FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_BITSET_PRIVATE	(FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_REQUEUE_PI_PRIVATE	(FUTEX_WAIT_REQUEUE_PI | \
-					 FUTEX_PRIVATE_FLAG)
-#define FUTEX_CMP_REQUEUE_PI_PRIVATE	(FUTEX_CMP_REQUEUE_PI | \
-					 FUTEX_PRIVATE_FLAG)
-
-/*
- * Support for robust futexes: the kernel cleans up held futexes at
- * thread exit time.
- */
-
-/*
- * Per-lock list entry - embedded in user-space locks, somewhere close
- * to the futex field. (Note: user-space uses a double-linked list to
- * achieve O(1) list add and remove, but the kernel only needs to know
- * about the forward link)
- *
- * NOTE: this structure is part of the syscall ABI, and must not be
- * changed.
- */
-struct robust_list {
-	struct robust_list __user *next;
-};
-
-/*
- * Per-thread list head:
- *
- * NOTE: this structure is part of the syscall ABI, and must only be
- * changed if the change is first communicated with the glibc folks.
- * (When an incompatible change is done, we'll increase the structure
- *  size, which glibc will detect)
- */
-struct robust_list_head {
-	/*
-	 * The head of the list. Points back to itself if empty:
-	 */
-	struct robust_list list;
-
-	/*
-	 * This relative offset is set by user-space, it gives the kernel
-	 * the relative position of the futex field to examine. This way
-	 * we keep userspace flexible, to freely shape its data-structure,
-	 * without hardcoding any particular offset into the kernel:
-	 */
-	long futex_offset;
-
-	/*
-	 * The death of the thread may race with userspace setting
-	 * up a lock's links. So to handle this race, userspace first
-	 * sets this field to the address of the to-be-taken lock,
-	 * then does the lock acquire, and then adds itself to the
-	 * list, and then clears this field. Hence the kernel will
-	 * always have full knowledge of all locks that the thread
-	 * _might_ have taken. We check the owner TID in any case,
-	 * so only truly owned locks will be handled.
-	 */
-	struct robust_list __user *list_op_pending;
-};
-
-/*
- * Are there any waiters for this robust futex:
- */
-#define FUTEX_WAITERS		0x80000000
-
-/*
- * The kernel signals via this bit that a thread holding a futex
- * has exited without unlocking the futex. The kernel also does
- * a FUTEX_WAKE on such futexes, after setting the bit, to wake
- * up any possible waiters:
- */
-#define FUTEX_OWNER_DIED	0x40000000
-
-/*
- * The rest of the robust-futex field is for the TID:
- */
-#define FUTEX_TID_MASK		0x3fffffff
-
-/*
- * This limit protects against a deliberately circular list.
- * (Not worth introducing an rlimit for it)
- */
-#define ROBUST_LIST_LIMIT	2048
-
-/*
- * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a
- * match of any bit.
- */
-#define FUTEX_BITSET_MATCH_ANY	0xffffffff
-
-#ifdef __KERNEL__
 struct inode;
 struct mm_struct;
 struct task_struct;
@@ -185,31 +64,4 @@
 {
 }
 #endif
-#endif /* __KERNEL__ */
-
-#define FUTEX_OP_SET		0	/* *(int *)UADDR2 = OPARG; */
-#define FUTEX_OP_ADD		1	/* *(int *)UADDR2 += OPARG; */
-#define FUTEX_OP_OR		2	/* *(int *)UADDR2 |= OPARG; */
-#define FUTEX_OP_ANDN		3	/* *(int *)UADDR2 &= ~OPARG; */
-#define FUTEX_OP_XOR		4	/* *(int *)UADDR2 ^= OPARG; */
-
-#define FUTEX_OP_OPARG_SHIFT	8	/* Use (1 << OPARG) instead of OPARG.  */
-
-#define FUTEX_OP_CMP_EQ		0	/* if (oldval == CMPARG) wake */
-#define FUTEX_OP_CMP_NE		1	/* if (oldval != CMPARG) wake */
-#define FUTEX_OP_CMP_LT		2	/* if (oldval < CMPARG) wake */
-#define FUTEX_OP_CMP_LE		3	/* if (oldval <= CMPARG) wake */
-#define FUTEX_OP_CMP_GT		4	/* if (oldval > CMPARG) wake */
-#define FUTEX_OP_CMP_GE		5	/* if (oldval >= CMPARG) wake */
-
-/* FUTEX_WAKE_OP will perform atomically
-   int oldval = *(int *)UADDR2;
-   *(int *)UADDR2 = oldval OP OPARG;
-   if (oldval CMP CMPARG)
-     wake UADDR2;  */
-
-#define FUTEX_OP(op, oparg, cmp, cmparg) \
-  (((op & 0xf) << 28) | ((cmp & 0xf) << 24)		\
-   | ((oparg & 0xfff) << 12) | (cmparg & 0xfff))
-
 #endif
diff --git a/include/linux/gameport.h b/include/linux/gameport.h
index b986be5..bb7de09 100644
--- a/include/linux/gameport.h
+++ b/include/linux/gameport.h
@@ -1,6 +1,3 @@
-#ifndef _GAMEPORT_H
-#define _GAMEPORT_H
-
 /*
  *  Copyright (c) 1999-2002 Vojtech Pavlik
  *
@@ -8,8 +5,9 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
+#ifndef _GAMEPORT_H
+#define _GAMEPORT_H
 
-#ifdef __KERNEL__
 #include <asm/io.h>
 #include <linux/types.h>
 #include <linux/list.h>
@@ -17,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/timer.h>
 #include <linux/slab.h>
+#include <uapi/linux/gameport.h>
 
 struct gameport {
 
@@ -166,24 +165,6 @@
 	module_driver(__gameport_driver, gameport_register_driver, \
 		       gameport_unregister_driver)
 
-#endif /* __KERNEL__ */
-
-#define GAMEPORT_MODE_DISABLED		0
-#define GAMEPORT_MODE_RAW		1
-#define GAMEPORT_MODE_COOKED		2
-
-#define GAMEPORT_ID_VENDOR_ANALOG	0x0001
-#define GAMEPORT_ID_VENDOR_MADCATZ	0x0002
-#define GAMEPORT_ID_VENDOR_LOGITECH	0x0003
-#define GAMEPORT_ID_VENDOR_CREATIVE	0x0004
-#define GAMEPORT_ID_VENDOR_GENIUS	0x0005
-#define GAMEPORT_ID_VENDOR_INTERACT	0x0006
-#define GAMEPORT_ID_VENDOR_MICROSOFT	0x0007
-#define GAMEPORT_ID_VENDOR_THRUSTMASTER	0x0008
-#define GAMEPORT_ID_VENDOR_GRAVIS	0x0009
-#define GAMEPORT_ID_VENDOR_GUILLEMOT	0x000a
-
-#ifdef __KERNEL__
 
 static inline void gameport_trigger(struct gameport *gameport)
 {
@@ -235,5 +216,4 @@
 void gameport_start_polling(struct gameport *gameport);
 void gameport_stop_polling(struct gameport *gameport);
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h
index 5ab61c1..55b6857 100644
--- a/include/linux/genetlink.h
+++ b/include/linux/genetlink.h
@@ -1,86 +1,8 @@
 #ifndef __LINUX_GENERIC_NETLINK_H
 #define __LINUX_GENERIC_NETLINK_H
 
-#include <linux/types.h>
-#include <linux/netlink.h>
+#include <uapi/linux/genetlink.h>
 
-#define GENL_NAMSIZ	16	/* length of family name */
-
-#define GENL_MIN_ID	NLMSG_MIN_TYPE
-#define GENL_MAX_ID	1023
-
-struct genlmsghdr {
-	__u8	cmd;
-	__u8	version;
-	__u16	reserved;
-};
-
-#define GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct genlmsghdr))
-
-#define GENL_ADMIN_PERM		0x01
-#define GENL_CMD_CAP_DO		0x02
-#define GENL_CMD_CAP_DUMP	0x04
-#define GENL_CMD_CAP_HASPOL	0x08
-
-/*
- * List of reserved static generic netlink identifiers:
- */
-#define GENL_ID_GENERATE	0
-#define GENL_ID_CTRL		NLMSG_MIN_TYPE
-
-/**************************************************************************
- * Controller
- **************************************************************************/
-
-enum {
-	CTRL_CMD_UNSPEC,
-	CTRL_CMD_NEWFAMILY,
-	CTRL_CMD_DELFAMILY,
-	CTRL_CMD_GETFAMILY,
-	CTRL_CMD_NEWOPS,
-	CTRL_CMD_DELOPS,
-	CTRL_CMD_GETOPS,
-	CTRL_CMD_NEWMCAST_GRP,
-	CTRL_CMD_DELMCAST_GRP,
-	CTRL_CMD_GETMCAST_GRP, /* unused */
-	__CTRL_CMD_MAX,
-};
-
-#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1)
-
-enum {
-	CTRL_ATTR_UNSPEC,
-	CTRL_ATTR_FAMILY_ID,
-	CTRL_ATTR_FAMILY_NAME,
-	CTRL_ATTR_VERSION,
-	CTRL_ATTR_HDRSIZE,
-	CTRL_ATTR_MAXATTR,
-	CTRL_ATTR_OPS,
-	CTRL_ATTR_MCAST_GROUPS,
-	__CTRL_ATTR_MAX,
-};
-
-#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1)
-
-enum {
-	CTRL_ATTR_OP_UNSPEC,
-	CTRL_ATTR_OP_ID,
-	CTRL_ATTR_OP_FLAGS,
-	__CTRL_ATTR_OP_MAX,
-};
-
-#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1)
-
-enum {
-	CTRL_ATTR_MCAST_GRP_UNSPEC,
-	CTRL_ATTR_MCAST_GRP_NAME,
-	CTRL_ATTR_MCAST_GRP_ID,
-	__CTRL_ATTR_MCAST_GRP_MAX,
-};
-
-#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1)
-
-#ifdef __KERNEL__
 
 /* All generic netlink requests are serialized by a global lock.  */
 extern void genl_lock(void);
@@ -113,6 +35,4 @@
 #define MODULE_ALIAS_GENL_FAMILY(family)\
  MODULE_ALIAS_NET_PF_PROTO_NAME(PF_NETLINK, NETLINK_GENERIC, "-family-" family)
 
-#endif /* __KERNEL__ */
-
 #endif	/* __LINUX_GENERIC_NETLINK_H */
diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h
index ee275c8..1acb144 100644
--- a/include/linux/hdlc.h
+++ b/include/linux/hdlc.h
@@ -7,24 +7,14 @@
  * under the terms of version 2 of the GNU General Public License
  * as published by the Free Software Foundation.
  */
-
 #ifndef __HDLC_H
 #define __HDLC_H
 
 
-#define HDLC_MAX_MTU 1500	/* Ethernet 1500 bytes */
-#if 0
-#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
-#else
-#define HDLC_MAX_MRU 1600 /* as required for FR network */
-#endif
-
-
-#ifdef __KERNEL__
-
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
 #include <linux/hdlc/ioctl.h>
+#include <uapi/linux/hdlc.h>
 
 /* This structure is a private property of HDLC protocols.
    Hardware drivers have no interest here */
@@ -127,5 +117,4 @@
 		return htons(ETH_P_HDLC);
 }
 
-#endif /* __KERNEL */
 #endif /* __HDLC_H */
diff --git a/include/linux/hdlcdrv.h b/include/linux/hdlcdrv.h
index c010b4a..be3be25 100644
--- a/include/linux/hdlcdrv.h
+++ b/include/linux/hdlcdrv.h
@@ -3,110 +3,14 @@
  * The Linux soundcard driver for 1200 baud and 9600 baud packet radio
  * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA
  */
-
 #ifndef _HDLCDRV_H
 #define _HDLCDRV_H
 
-/* -------------------------------------------------------------------- */
-/*
- * structs for the IOCTL commands
- */
-
-struct hdlcdrv_params {
-	int iobase;
-	int irq;
-	int dma;
-	int dma2;
-	int seriobase;
-	int pariobase;
-	int midiiobase;
-};	
-
-struct hdlcdrv_channel_params {
-	int tx_delay;  /* the transmitter keyup delay in 10ms units */
-	int tx_tail;   /* the transmitter keyoff delay in 10ms units */
-	int slottime;  /* the slottime in 10ms; usually 10 = 100ms */
-	int ppersist;  /* the p-persistence 0..255 */
-	int fulldup;   /* some driver do not support full duplex, setting */
-	               /* this just makes them send even if DCD is on */
-};	
-
-struct hdlcdrv_old_channel_state {
-  	int ptt;
-  	int dcd;
-  	int ptt_keyed;
-};
-
-struct hdlcdrv_channel_state {
- 	int ptt;
- 	int dcd;
- 	int ptt_keyed;
- 	unsigned long tx_packets;
- 	unsigned long tx_errors;
- 	unsigned long rx_packets;
- 	unsigned long rx_errors;
-};
-
-struct hdlcdrv_ioctl {
-	int cmd;
-	union {
-		struct hdlcdrv_params mp;
-		struct hdlcdrv_channel_params cp;
-		struct hdlcdrv_channel_state cs;
-		struct hdlcdrv_old_channel_state ocs;
-		unsigned int calibrate;
-		unsigned char bits;
-		char modename[128];
-		char drivername[32];
-	} data;
-};
-
-/* -------------------------------------------------------------------- */
-
-/*
- * ioctl values
- */
-#define HDLCDRVCTL_GETMODEMPAR       0
-#define HDLCDRVCTL_SETMODEMPAR       1
-#define HDLCDRVCTL_MODEMPARMASK      2  /* not handled by hdlcdrv */
-#define HDLCDRVCTL_GETCHANNELPAR    10
-#define HDLCDRVCTL_SETCHANNELPAR    11
-#define HDLCDRVCTL_OLDGETSTAT       20
-#define HDLCDRVCTL_CALIBRATE        21
-#define HDLCDRVCTL_GETSTAT          22
-
-/*
- * these are mainly for debugging purposes
- */
-#define HDLCDRVCTL_GETSAMPLES       30
-#define HDLCDRVCTL_GETBITS          31
-
-/*
- * not handled by hdlcdrv, but by its depending drivers
- */
-#define HDLCDRVCTL_GETMODE          40
-#define HDLCDRVCTL_SETMODE          41
-#define HDLCDRVCTL_MODELIST         42
-#define HDLCDRVCTL_DRIVERNAME       43
-
-/*
- * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK
- */
-#define HDLCDRV_PARMASK_IOBASE      (1<<0)
-#define HDLCDRV_PARMASK_IRQ         (1<<1)
-#define HDLCDRV_PARMASK_DMA         (1<<2)
-#define HDLCDRV_PARMASK_DMA2        (1<<3)
-#define HDLCDRV_PARMASK_SERIOBASE   (1<<4)
-#define HDLCDRV_PARMASK_PARIOBASE   (1<<5)
-#define HDLCDRV_PARMASK_MIDIIOBASE  (1<<6)
-
-/* -------------------------------------------------------------------- */
-
-#ifdef __KERNEL__
 
 #include <linux/netdevice.h>
 #include <linux/if.h>
 #include <linux/spinlock.h>
+#include <uapi/linux/hdlcdrv.h>
 
 #define HDLCDRV_MAGIC      0x5ac6e778
 #define HDLCDRV_HDLCBUFFER  32 /* should be a power of 2 for speed reasons */
@@ -368,10 +272,4 @@
 
 
 
-#endif /* __KERNEL__ */
-
-/* -------------------------------------------------------------------- */
-
 #endif /* _HDLCDRV_H */
-
-/* -------------------------------------------------------------------- */
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 7e1f37d..c076041 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -1,12 +1,8 @@
-#ifndef __HID_H
-#define __HID_H
-
 /*
  *  Copyright (c) 1999 Andreas Gal
  *  Copyright (c) 2000-2001 Vojtech Pavlik
  *  Copyright (c) 2006-2007 Jiri Kosina
  */
-
 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,43 +22,9 @@
  * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
  */
+#ifndef __HID_H
+#define __HID_H
 
-/*
- * USB HID (Human Interface Device) interface class code
- */
-
-#define USB_INTERFACE_CLASS_HID		3
-
-/*
- * USB HID interface subclass and protocol codes
- */
-
-#define USB_INTERFACE_SUBCLASS_BOOT	1
-#define USB_INTERFACE_PROTOCOL_KEYBOARD	1
-#define USB_INTERFACE_PROTOCOL_MOUSE	2
-
-/*
- * HID class requests
- */
-
-#define HID_REQ_GET_REPORT		0x01
-#define HID_REQ_GET_IDLE		0x02
-#define HID_REQ_GET_PROTOCOL		0x03
-#define HID_REQ_SET_REPORT		0x09
-#define HID_REQ_SET_IDLE		0x0A
-#define HID_REQ_SET_PROTOCOL		0x0B
-
-/*
- * HID class descriptor types
- */
-
-#define HID_DT_HID			(USB_TYPE_CLASS | 0x01)
-#define HID_DT_REPORT			(USB_TYPE_CLASS | 0x02)
-#define HID_DT_PHYSICAL			(USB_TYPE_CLASS | 0x03)
-
-#define HID_MAX_DESCRIPTOR_SIZE		4096
-
-#ifdef __KERNEL__
 
 #include <linux/types.h>
 #include <linux/slab.h>
@@ -73,6 +35,7 @@
 #include <linux/input.h>
 #include <linux/semaphore.h>
 #include <linux/power_supply.h>
+#include <uapi/linux/hid.h>
 
 /*
  * We parse each description item into this structure. Short items data
@@ -943,7 +906,4 @@
 #define hid_dbg(hid, fmt, arg...)			\
 	dev_dbg(&(hid)->dev, fmt, ##arg)
 
-#endif /* __KERNEL__ */
-
 #endif
-
diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h
index a3f481a..a5dd814 100644
--- a/include/linux/hiddev.h
+++ b/include/linux/hiddev.h
@@ -1,12 +1,8 @@
-#ifndef _HIDDEV_H
-#define _HIDDEV_H
-
 /*
  *  Copyright (c) 1999-2000 Vojtech Pavlik
  *
  *  Sponsored by SuSE
  */
-
 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,190 +22,11 @@
  * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
  * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
  */
+#ifndef _HIDDEV_H
+#define _HIDDEV_H
 
-#include <linux/types.h>
+#include <uapi/linux/hiddev.h>
 
-/*
- * The event structure itself
- */
-
-struct hiddev_event {
-	unsigned hid;
-	signed int value;
-};
-
-struct hiddev_devinfo {
-	__u32 bustype;
-	__u32 busnum;
-	__u32 devnum;
-	__u32 ifnum;
-	__s16 vendor;
-	__s16 product;
-	__s16 version;
-	__u32 num_applications;
-};
-
-struct hiddev_collection_info {
-	__u32 index;
-	__u32 type;
-	__u32 usage;
-	__u32 level;
-};
-
-#define HID_STRING_SIZE 256
-struct hiddev_string_descriptor {
-	__s32 index;
-	char value[HID_STRING_SIZE];
-};
-
-struct hiddev_report_info {
-	__u32 report_type;
-	__u32 report_id;
-	__u32 num_fields;
-};
-
-/* To do a GUSAGE/SUSAGE, fill in at least usage_code,  report_type and 
- * report_id.  Set report_id to REPORT_ID_UNKNOWN if the rest of the fields 
- * are unknown.  Otherwise use a usage_ref struct filled in from a previous 
- * successful GUSAGE call to save time.  To actually send a value to the
- * device, perform a SUSAGE first, followed by a SREPORT.  An INITREPORT or a
- * GREPORT isn't necessary for a GUSAGE to return valid data.
- */
-#define HID_REPORT_ID_UNKNOWN 0xffffffff
-#define HID_REPORT_ID_FIRST   0x00000100
-#define HID_REPORT_ID_NEXT    0x00000200
-#define HID_REPORT_ID_MASK    0x000000ff
-#define HID_REPORT_ID_MAX     0x000000ff
-
-#define HID_REPORT_TYPE_INPUT	1
-#define HID_REPORT_TYPE_OUTPUT	2
-#define HID_REPORT_TYPE_FEATURE	3
-#define HID_REPORT_TYPE_MIN     1
-#define HID_REPORT_TYPE_MAX     3
-
-struct hiddev_field_info {
-	__u32 report_type;
-	__u32 report_id;
-	__u32 field_index;
-	__u32 maxusage;
-	__u32 flags;
-	__u32 physical;		/* physical usage for this field */
-	__u32 logical;		/* logical usage for this field */
-	__u32 application;		/* application usage for this field */
-	__s32 logical_minimum;
-	__s32 logical_maximum;
-	__s32 physical_minimum;
-	__s32 physical_maximum;
-	__u32 unit_exponent;
-	__u32 unit;
-};
-
-/* Fill in report_type, report_id and field_index to get the information on a
- * field.
- */
-#define HID_FIELD_CONSTANT		0x001
-#define HID_FIELD_VARIABLE		0x002
-#define HID_FIELD_RELATIVE		0x004
-#define HID_FIELD_WRAP			0x008	
-#define HID_FIELD_NONLINEAR		0x010
-#define HID_FIELD_NO_PREFERRED		0x020
-#define HID_FIELD_NULL_STATE		0x040
-#define HID_FIELD_VOLATILE		0x080
-#define HID_FIELD_BUFFERED_BYTE		0x100
-
-struct hiddev_usage_ref {
-	__u32 report_type;
-	__u32 report_id;
-	__u32 field_index;
-	__u32 usage_index;
-	__u32 usage_code;
-	__s32 value;
-};
-
-/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
- * It really manifests itself as setting the value of consecutive usages */
-#define HID_MAX_MULTI_USAGES 1024
-struct hiddev_usage_ref_multi {
-	struct hiddev_usage_ref uref;
-	__u32 num_values;
-	__s32 values[HID_MAX_MULTI_USAGES];
-};
-
-/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
- * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
- * been sent by the device 
- */
-#define HID_FIELD_INDEX_NONE 0xffffffff
-
-/*
- * Protocol version.
- */
-
-#define HID_VERSION		0x010004
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-#define HIDIOCGVERSION		_IOR('H', 0x01, int)
-#define HIDIOCAPPLICATION	_IO('H', 0x02)
-#define HIDIOCGDEVINFO		_IOR('H', 0x03, struct hiddev_devinfo)
-#define HIDIOCGSTRING		_IOR('H', 0x04, struct hiddev_string_descriptor)
-#define HIDIOCINITREPORT	_IO('H', 0x05)
-#define HIDIOCGNAME(len)	_IOC(_IOC_READ, 'H', 0x06, len)
-#define HIDIOCGREPORT		_IOW('H', 0x07, struct hiddev_report_info)
-#define HIDIOCSREPORT		_IOW('H', 0x08, struct hiddev_report_info)
-#define HIDIOCGREPORTINFO	_IOWR('H', 0x09, struct hiddev_report_info)
-#define HIDIOCGFIELDINFO	_IOWR('H', 0x0A, struct hiddev_field_info)
-#define HIDIOCGUSAGE		_IOWR('H', 0x0B, struct hiddev_usage_ref)
-#define HIDIOCSUSAGE		_IOW('H', 0x0C, struct hiddev_usage_ref)
-#define HIDIOCGUCODE		_IOWR('H', 0x0D, struct hiddev_usage_ref)
-#define HIDIOCGFLAG		_IOR('H', 0x0E, int)
-#define HIDIOCSFLAG		_IOW('H', 0x0F, int)
-#define HIDIOCGCOLLECTIONINDEX	_IOW('H', 0x10, struct hiddev_usage_ref)
-#define HIDIOCGCOLLECTIONINFO	_IOWR('H', 0x11, struct hiddev_collection_info)
-#define HIDIOCGPHYS(len)	_IOC(_IOC_READ, 'H', 0x12, len)
-
-/* For writing/reading to multiple/consecutive usages */
-#define HIDIOCGUSAGES		_IOWR('H', 0x13, struct hiddev_usage_ref_multi)
-#define HIDIOCSUSAGES		_IOW('H', 0x14, struct hiddev_usage_ref_multi)
-
-/* 
- * Flags to be used in HIDIOCSFLAG
- */
-#define HIDDEV_FLAG_UREF	0x1
-#define HIDDEV_FLAG_REPORT	0x2
-#define HIDDEV_FLAGS		0x3
-
-/* To traverse the input report descriptor info for a HID device, perform the 
- * following:
- *
- * rinfo.report_type = HID_REPORT_TYPE_INPUT;
- * rinfo.report_id = HID_REPORT_ID_FIRST;
- * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
- *
- * while (ret >= 0) {
- * 	for (i = 0; i < rinfo.num_fields; i++) {
- * 		finfo.report_type = rinfo.report_type;
- * 		finfo.report_id = rinfo.report_id;
- * 		finfo.field_index = i;
- * 		ioctl(fd, HIDIOCGFIELDINFO, &finfo);
- * 		for (j = 0; j < finfo.maxusage; j++) {
- * 			uref.report_type = rinfo.report_type;
- * 			uref.report_id = rinfo.report_id;
- * 			uref.field_index = i;
- * 			uref.usage_index = j;
- * 			ioctl(fd, HIDIOCGUCODE, &uref);
- * 			ioctl(fd, HIDIOCGUSAGE, &uref);
- * 		}
- * 	}
- * 	rinfo.report_id |= HID_REPORT_ID_NEXT;
- * 	ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
- * }
- */
-
-
-#ifdef __KERNEL__
 
 /*
  * In-kernel definitions.
@@ -237,4 +54,3 @@
 #endif
 
 #endif
-#endif
diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h
index 45e9fcb..2451662 100644
--- a/include/linux/hidraw.h
+++ b/include/linux/hidraw.h
@@ -1,10 +1,6 @@
-#ifndef _HIDRAW_H
-#define _HIDRAW_H
-
 /*
  *  Copyright (c) 2007 Jiri Kosina
  */
-
 /*
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -14,39 +10,11 @@
  * this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  */
+#ifndef _HIDRAW_H
+#define _HIDRAW_H
 
-#include <linux/hid.h>
-#include <linux/types.h>
+#include <uapi/linux/hidraw.h>
 
-struct hidraw_report_descriptor {
-	__u32 size;
-	__u8 value[HID_MAX_DESCRIPTOR_SIZE];
-};
-
-struct hidraw_devinfo {
-	__u32 bustype;
-	__s16 vendor;
-	__s16 product;
-};
-
-/* ioctl interface */
-#define HIDIOCGRDESCSIZE	_IOR('H', 0x01, int)
-#define HIDIOCGRDESC		_IOR('H', 0x02, struct hidraw_report_descriptor)
-#define HIDIOCGRAWINFO		_IOR('H', 0x03, struct hidraw_devinfo)
-#define HIDIOCGRAWNAME(len)     _IOC(_IOC_READ, 'H', 0x04, len)
-#define HIDIOCGRAWPHYS(len)     _IOC(_IOC_READ, 'H', 0x05, len)
-/* The first byte of SFEATURE and GFEATURE is the report number */
-#define HIDIOCSFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
-#define HIDIOCGFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len)
-
-#define HIDRAW_FIRST_MINOR 0
-#define HIDRAW_MAX_DEVICES 64
-/* number of reports to buffer */
-#define HIDRAW_BUFFER_SIZE 64
-
-
-/* kernel-only API declarations */
-#ifdef __KERNEL__
 
 struct hidraw {
 	unsigned int minor;
@@ -88,5 +56,3 @@
 #endif
 
 #endif
-
-#endif
diff --git a/include/linux/hpet.h b/include/linux/hpet.h
index 219ca4f..9427ab4 100644
--- a/include/linux/hpet.h
+++ b/include/linux/hpet.h
@@ -1,9 +1,8 @@
 #ifndef	__HPET__
 #define	__HPET__ 1
 
-#include <linux/compiler.h>
+#include <uapi/linux/hpet.h>
 
-#ifdef __KERNEL__
 
 /*
  * Offsets into HPET Registers
@@ -108,24 +107,4 @@
 
 int hpet_alloc(struct hpet_data *);
 
-#endif /* __KERNEL__ */
-
-struct hpet_info {
-	unsigned long hi_ireqfreq;	/* Hz */
-	unsigned long hi_flags;	/* information */
-	unsigned short hi_hpet;
-	unsigned short hi_timer;
-};
-
-#define HPET_INFO_PERIODIC	0x0010	/* periodic-capable comparator */
-
-#define	HPET_IE_ON	_IO('h', 0x01)	/* interrupt on */
-#define	HPET_IE_OFF	_IO('h', 0x02)	/* interrupt off */
-#define	HPET_INFO	_IOR('h', 0x03, struct hpet_info)
-#define	HPET_EPI	_IO('h', 0x04)	/* enable periodic */
-#define	HPET_DPI	_IO('h', 0x05)	/* disable periodic */
-#define	HPET_IRQFREQ	_IOW('h', 0x6, unsigned long)	/* IRQFREQ usec */
-
-#define MAX_HPET_TBS	8		/* maximum hpet timer blocks */
-
 #endif				/* !__HPET__ */
diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h
index 8a7406b..7972714 100644
--- a/include/linux/i2c-dev.h
+++ b/include/linux/i2c-dev.h
@@ -19,57 +19,10 @@
     Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
     MA 02110-1301 USA.
 */
-
 #ifndef _LINUX_I2C_DEV_H
 #define _LINUX_I2C_DEV_H
 
-#include <linux/types.h>
-#include <linux/compiler.h>
+#include <uapi/linux/i2c-dev.h>
 
-/* /dev/i2c-X ioctl commands.  The ioctl's parameter is always an
- * unsigned long, except for:
- *	- I2C_FUNCS, takes pointer to an unsigned long
- *	- I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
- *	- I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
- */
-#define I2C_RETRIES	0x0701	/* number of times a device address should
-				   be polled when not acknowledging */
-#define I2C_TIMEOUT	0x0702	/* set timeout in units of 10 ms */
-
-/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
- * are NOT supported! (due to code brokenness)
- */
-#define I2C_SLAVE	0x0703	/* Use this slave address */
-#define I2C_SLAVE_FORCE	0x0706	/* Use this slave address, even if it
-				   is already in use by a driver! */
-#define I2C_TENBIT	0x0704	/* 0 for 7 bit addrs, != 0 for 10 bit */
-
-#define I2C_FUNCS	0x0705	/* Get the adapter functionality mask */
-
-#define I2C_RDWR	0x0707	/* Combined R/W transfer (one STOP only) */
-
-#define I2C_PEC		0x0708	/* != 0 to use PEC with SMBus */
-#define I2C_SMBUS	0x0720	/* SMBus transfer */
-
-
-/* This is the structure as used in the I2C_SMBUS ioctl call */
-struct i2c_smbus_ioctl_data {
-	__u8 read_write;
-	__u8 command;
-	__u32 size;
-	union i2c_smbus_data __user *data;
-};
-
-/* This is the structure as used in the I2C_RDWR ioctl call */
-struct i2c_rdwr_ioctl_data {
-	struct i2c_msg __user *msgs;	/* pointers to i2c_msgs */
-	__u32 nmsgs;			/* number of i2c_msgs */
-};
-
-#define  I2C_RDRW_IOCTL_MAX_MSGS	42
-
-#ifdef __KERNEL__
 #define I2C_MAJOR	89		/* Device major number		*/
-#endif
-
 #endif /* _LINUX_I2C_DEV_H */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 94aed0c..800de22 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -23,18 +23,16 @@
 
 /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
    Frodo Looijaard <frodol@dds.nl> */
-
 #ifndef _LINUX_I2C_H
 #define _LINUX_I2C_H
 
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/mod_devicetable.h>
 #include <linux/device.h>	/* for struct device */
 #include <linux/sched.h>	/* for completion */
 #include <linux/mutex.h>
 #include <linux/of.h>		/* for struct device_node */
 #include <linux/swab.h>		/* for swab16 */
+#include <uapi/linux/i2c.h>
 
 extern struct bus_type i2c_bus_type;
 extern struct device_type i2c_adapter_type;
@@ -503,125 +501,4 @@
 			i2c_del_driver)
 
 #endif /* I2C */
-#endif /* __KERNEL__ */
-
-/**
- * struct i2c_msg - an I2C transaction segment beginning with START
- * @addr: Slave address, either seven or ten bits.  When this is a ten
- *	bit address, I2C_M_TEN must be set in @flags and the adapter
- *	must support I2C_FUNC_10BIT_ADDR.
- * @flags: I2C_M_RD is handled by all adapters.  No other flags may be
- *	provided unless the adapter exported the relevant I2C_FUNC_*
- *	flags through i2c_check_functionality().
- * @len: Number of data bytes in @buf being read from or written to the
- *	I2C slave address.  For read transactions where I2C_M_RECV_LEN
- *	is set, the caller guarantees that this buffer can hold up to
- *	32 bytes in addition to the initial length byte sent by the
- *	slave (plus, if used, the SMBus PEC); and this value will be
- *	incremented by the number of block data bytes received.
- * @buf: The buffer into which data is read, or from which it's written.
- *
- * An i2c_msg is the low level representation of one segment of an I2C
- * transaction.  It is visible to drivers in the @i2c_transfer() procedure,
- * to userspace from i2c-dev, and to I2C adapter drivers through the
- * @i2c_adapter.@master_xfer() method.
- *
- * Except when I2C "protocol mangling" is used, all I2C adapters implement
- * the standard rules for I2C transactions.  Each transaction begins with a
- * START.  That is followed by the slave address, and a bit encoding read
- * versus write.  Then follow all the data bytes, possibly including a byte
- * with SMBus PEC.  The transfer terminates with a NAK, or when all those
- * bytes have been transferred and ACKed.  If this is the last message in a
- * group, it is followed by a STOP.  Otherwise it is followed by the next
- * @i2c_msg transaction segment, beginning with a (repeated) START.
- *
- * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
- * passing certain @flags may have changed those standard protocol behaviors.
- * Those flags are only for use with broken/nonconforming slaves, and with
- * adapters which are known to support the specific mangling options they
- * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
- */
-struct i2c_msg {
-	__u16 addr;	/* slave address			*/
-	__u16 flags;
-#define I2C_M_TEN		0x0010	/* this is a ten bit chip address */
-#define I2C_M_RD		0x0001	/* read data, from slave to master */
-#define I2C_M_STOP		0x8000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NOSTART		0x4000	/* if I2C_FUNC_NOSTART */
-#define I2C_M_REV_DIR_ADDR	0x2000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_IGNORE_NAK	0x1000	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_NO_RD_ACK		0x0800	/* if I2C_FUNC_PROTOCOL_MANGLING */
-#define I2C_M_RECV_LEN		0x0400	/* length will be first received byte */
-	__u16 len;		/* msg length				*/
-	__u8 *buf;		/* pointer to msg data			*/
-};
-
-/* To determine what functionality is present */
-
-#define I2C_FUNC_I2C			0x00000001
-#define I2C_FUNC_10BIT_ADDR		0x00000002
-#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_IGNORE_NAK etc. */
-#define I2C_FUNC_SMBUS_PEC		0x00000008
-#define I2C_FUNC_NOSTART		0x00000010 /* I2C_M_NOSTART */
-#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
-#define I2C_FUNC_SMBUS_QUICK		0x00010000
-#define I2C_FUNC_SMBUS_READ_BYTE	0x00020000
-#define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000
-#define I2C_FUNC_SMBUS_READ_BYTE_DATA	0x00080000
-#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA	0x00100000
-#define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000
-#define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000
-#define I2C_FUNC_SMBUS_PROC_CALL	0x00800000
-#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000
-#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
-#define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
-#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
-
-#define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
-					 I2C_FUNC_SMBUS_WRITE_BYTE)
-#define I2C_FUNC_SMBUS_BYTE_DATA	(I2C_FUNC_SMBUS_READ_BYTE_DATA | \
-					 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
-#define I2C_FUNC_SMBUS_WORD_DATA	(I2C_FUNC_SMBUS_READ_WORD_DATA | \
-					 I2C_FUNC_SMBUS_WRITE_WORD_DATA)
-#define I2C_FUNC_SMBUS_BLOCK_DATA	(I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
-					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
-#define I2C_FUNC_SMBUS_I2C_BLOCK	(I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
-					 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
-
-#define I2C_FUNC_SMBUS_EMUL		(I2C_FUNC_SMBUS_QUICK | \
-					 I2C_FUNC_SMBUS_BYTE | \
-					 I2C_FUNC_SMBUS_BYTE_DATA | \
-					 I2C_FUNC_SMBUS_WORD_DATA | \
-					 I2C_FUNC_SMBUS_PROC_CALL | \
-					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
-					 I2C_FUNC_SMBUS_I2C_BLOCK | \
-					 I2C_FUNC_SMBUS_PEC)
-
-/*
- * Data for SMBus Messages
- */
-#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */
-union i2c_smbus_data {
-	__u8 byte;
-	__u16 word;
-	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
-			       /* and one more for user-space compatibility */
-};
-
-/* i2c_smbus_xfer read or write markers */
-#define I2C_SMBUS_READ	1
-#define I2C_SMBUS_WRITE	0
-
-/* SMBus transaction types (size parameter in the above functions)
-   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
-#define I2C_SMBUS_QUICK		    0
-#define I2C_SMBUS_BYTE		    1
-#define I2C_SMBUS_BYTE_DATA	    2
-#define I2C_SMBUS_WORD_DATA	    3
-#define I2C_SMBUS_PROC_CALL	    4
-#define I2C_SMBUS_BLOCK_DATA	    5
-#define I2C_SMBUS_I2C_BLOCK_BROKEN  6
-#define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
-#define I2C_SMBUS_I2C_BLOCK_DATA    8
-
 #endif /* _LINUX_I2C_H */
diff --git a/include/linux/icmp.h b/include/linux/icmp.h
index 474f2a5..efc1849 100644
--- a/include/linux/icmp.h
+++ b/include/linux/icmp.h
@@ -17,89 +17,11 @@
 #ifndef _LINUX_ICMP_H
 #define	_LINUX_ICMP_H
 
-#include <linux/types.h>
-
-#define ICMP_ECHOREPLY		0	/* Echo Reply			*/
-#define ICMP_DEST_UNREACH	3	/* Destination Unreachable	*/
-#define ICMP_SOURCE_QUENCH	4	/* Source Quench		*/
-#define ICMP_REDIRECT		5	/* Redirect (change route)	*/
-#define ICMP_ECHO		8	/* Echo Request			*/
-#define ICMP_TIME_EXCEEDED	11	/* Time Exceeded		*/
-#define ICMP_PARAMETERPROB	12	/* Parameter Problem		*/
-#define ICMP_TIMESTAMP		13	/* Timestamp Request		*/
-#define ICMP_TIMESTAMPREPLY	14	/* Timestamp Reply		*/
-#define ICMP_INFO_REQUEST	15	/* Information Request		*/
-#define ICMP_INFO_REPLY		16	/* Information Reply		*/
-#define ICMP_ADDRESS		17	/* Address Mask Request		*/
-#define ICMP_ADDRESSREPLY	18	/* Address Mask Reply		*/
-#define NR_ICMP_TYPES		18
-
-
-/* Codes for UNREACH. */
-#define ICMP_NET_UNREACH	0	/* Network Unreachable		*/
-#define ICMP_HOST_UNREACH	1	/* Host Unreachable		*/
-#define ICMP_PROT_UNREACH	2	/* Protocol Unreachable		*/
-#define ICMP_PORT_UNREACH	3	/* Port Unreachable		*/
-#define ICMP_FRAG_NEEDED	4	/* Fragmentation Needed/DF set	*/
-#define ICMP_SR_FAILED		5	/* Source Route failed		*/
-#define ICMP_NET_UNKNOWN	6
-#define ICMP_HOST_UNKNOWN	7
-#define ICMP_HOST_ISOLATED	8
-#define ICMP_NET_ANO		9
-#define ICMP_HOST_ANO		10
-#define ICMP_NET_UNR_TOS	11
-#define ICMP_HOST_UNR_TOS	12
-#define ICMP_PKT_FILTERED	13	/* Packet filtered */
-#define ICMP_PREC_VIOLATION	14	/* Precedence violation */
-#define ICMP_PREC_CUTOFF	15	/* Precedence cut off */
-#define NR_ICMP_UNREACH		15	/* instead of hardcoding immediate value */
-
-/* Codes for REDIRECT. */
-#define ICMP_REDIR_NET		0	/* Redirect Net			*/
-#define ICMP_REDIR_HOST		1	/* Redirect Host		*/
-#define ICMP_REDIR_NETTOS	2	/* Redirect Net for TOS		*/
-#define ICMP_REDIR_HOSTTOS	3	/* Redirect Host for TOS	*/
-
-/* Codes for TIME_EXCEEDED. */
-#define ICMP_EXC_TTL		0	/* TTL count exceeded		*/
-#define ICMP_EXC_FRAGTIME	1	/* Fragment Reass time exceeded	*/
-
-
-struct icmphdr {
-  __u8		type;
-  __u8		code;
-  __sum16	checksum;
-  union {
-	struct {
-		__be16	id;
-		__be16	sequence;
-	} echo;
-	__be32	gateway;
-	struct {
-		__be16	__unused;
-		__be16	mtu;
-	} frag;
-  } un;
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/icmp.h>
 
 static inline struct icmphdr *icmp_hdr(const struct sk_buff *skb)
 {
 	return (struct icmphdr *)skb_transport_header(skb);
 }
-#endif
-
-/*
- *	constants for (set|get)sockopt
- */
-
-#define ICMP_FILTER			1
-
-struct icmp_filter {
-	__u32		data;
-};
-
-
 #endif	/* _LINUX_ICMP_H */
diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h
index ba45e6b..b4f6c29 100644
--- a/include/linux/icmpv6.h
+++ b/include/linux/icmpv6.h
@@ -1,174 +1,13 @@
 #ifndef _LINUX_ICMPV6_H
 #define _LINUX_ICMPV6_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-struct icmp6hdr {
-
-	__u8		icmp6_type;
-	__u8		icmp6_code;
-	__sum16		icmp6_cksum;
-
-
-	union {
-		__be32			un_data32[1];
-		__be16			un_data16[2];
-		__u8			un_data8[4];
-
-		struct icmpv6_echo {
-			__be16		identifier;
-			__be16		sequence;
-		} u_echo;
-
-                struct icmpv6_nd_advt {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-                        __u32		reserved:5,
-                        		override:1,
-                        		solicited:1,
-                        		router:1,
-					reserved2:24;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-                        __u32		router:1,
-					solicited:1,
-                        		override:1,
-                        		reserved:29;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif						
-                } u_nd_advt;
-
-                struct icmpv6_nd_ra {
-			__u8		hop_limit;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-			__u8		reserved:3,
-					router_pref:2,
-					home_agent:1,
-					other:1,
-					managed:1;
-
-#elif defined(__BIG_ENDIAN_BITFIELD)
-			__u8		managed:1,
-					other:1,
-					home_agent:1,
-					router_pref:2,
-					reserved:3;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-			__be16		rt_lifetime;
-                } u_nd_ra;
-
-	} icmp6_dataun;
-
-#define icmp6_identifier	icmp6_dataun.u_echo.identifier
-#define icmp6_sequence		icmp6_dataun.u_echo.sequence
-#define icmp6_pointer		icmp6_dataun.un_data32[0]
-#define icmp6_mtu		icmp6_dataun.un_data32[0]
-#define icmp6_unused		icmp6_dataun.un_data32[0]
-#define icmp6_maxdelay		icmp6_dataun.un_data16[0]
-#define icmp6_router		icmp6_dataun.u_nd_advt.router
-#define icmp6_solicited		icmp6_dataun.u_nd_advt.solicited
-#define icmp6_override		icmp6_dataun.u_nd_advt.override
-#define icmp6_ndiscreserved	icmp6_dataun.u_nd_advt.reserved
-#define icmp6_hop_limit		icmp6_dataun.u_nd_ra.hop_limit
-#define icmp6_addrconf_managed	icmp6_dataun.u_nd_ra.managed
-#define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
-#define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
-#define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/icmpv6.h>
 
 static inline struct icmp6hdr *icmp6_hdr(const struct sk_buff *skb)
 {
 	return (struct icmp6hdr *)skb_transport_header(skb);
 }
-#endif
-
-#define ICMPV6_ROUTER_PREF_LOW		0x3
-#define ICMPV6_ROUTER_PREF_MEDIUM	0x0
-#define ICMPV6_ROUTER_PREF_HIGH		0x1
-#define ICMPV6_ROUTER_PREF_INVALID	0x2
-
-#define ICMPV6_DEST_UNREACH		1
-#define ICMPV6_PKT_TOOBIG		2
-#define ICMPV6_TIME_EXCEED		3
-#define ICMPV6_PARAMPROB		4
-
-#define ICMPV6_INFOMSG_MASK		0x80
-
-#define ICMPV6_ECHO_REQUEST		128
-#define ICMPV6_ECHO_REPLY		129
-#define ICMPV6_MGM_QUERY		130
-#define ICMPV6_MGM_REPORT       	131
-#define ICMPV6_MGM_REDUCTION    	132
-
-#define ICMPV6_NI_QUERY			139
-#define ICMPV6_NI_REPLY			140
-
-#define ICMPV6_MLD2_REPORT		143
-
-#define ICMPV6_DHAAD_REQUEST		144
-#define ICMPV6_DHAAD_REPLY		145
-#define ICMPV6_MOBILE_PREFIX_SOL	146
-#define ICMPV6_MOBILE_PREFIX_ADV	147
-
-/*
- *	Codes for Destination Unreachable
- */
-#define ICMPV6_NOROUTE			0
-#define ICMPV6_ADM_PROHIBITED		1
-#define ICMPV6_NOT_NEIGHBOUR		2
-#define ICMPV6_ADDR_UNREACH		3
-#define ICMPV6_PORT_UNREACH		4
-
-/*
- *	Codes for Time Exceeded
- */
-#define ICMPV6_EXC_HOPLIMIT		0
-#define ICMPV6_EXC_FRAGTIME		1
-
-/*
- *	Codes for Parameter Problem
- */
-#define ICMPV6_HDR_FIELD		0
-#define ICMPV6_UNK_NEXTHDR		1
-#define ICMPV6_UNK_OPTION		2
-
-/*
- *	constants for (set|get)sockopt
- */
-
-#define ICMPV6_FILTER			1
-
-/*
- *	ICMPV6 filter
- */
-
-#define ICMPV6_FILTER_BLOCK		1
-#define ICMPV6_FILTER_PASS		2
-#define ICMPV6_FILTER_BLOCKOTHERS	3
-#define ICMPV6_FILTER_PASSONLY		4
-
-struct icmp6_filter {
-	__u32		data[8];
-};
-
-/*
- *	Definitions for MLDv2
- */
-#define MLD2_MODE_IS_INCLUDE	1
-#define MLD2_MODE_IS_EXCLUDE	2
-#define MLD2_CHANGE_TO_INCLUDE	3
-#define MLD2_CHANGE_TO_EXCLUDE	4
-#define MLD2_ALLOW_NEW_SOURCES	5
-#define MLD2_BLOCK_OLD_SOURCES	6
-
-#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } }
-
-#ifdef __KERNEL__
 
 #include <linux/netdevice.h>
 
@@ -192,5 +31,3 @@
 							 const struct in6_addr *daddr,
 							 int oif);
 #endif
-
-#endif
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 9adcc29..89b4614 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -23,140 +23,8 @@
 #ifndef _LINUX_IF_ARP_H
 #define _LINUX_IF_ARP_H
 
-#include <linux/netdevice.h>
-
-/* ARP protocol HARDWARE identifiers. */
-#define ARPHRD_NETROM	0		/* from KA9Q: NET/ROM pseudo	*/
-#define ARPHRD_ETHER 	1		/* Ethernet 10Mbps		*/
-#define	ARPHRD_EETHER	2		/* Experimental Ethernet	*/
-#define	ARPHRD_AX25	3		/* AX.25 Level 2		*/
-#define	ARPHRD_PRONET	4		/* PROnet token ring		*/
-#define	ARPHRD_CHAOS	5		/* Chaosnet			*/
-#define	ARPHRD_IEEE802	6		/* IEEE 802.2 Ethernet/TR/TB	*/
-#define	ARPHRD_ARCNET	7		/* ARCnet			*/
-#define	ARPHRD_APPLETLK	8		/* APPLEtalk			*/
-#define ARPHRD_DLCI	15		/* Frame Relay DLCI		*/
-#define ARPHRD_ATM	19		/* ATM 				*/
-#define ARPHRD_METRICOM	23		/* Metricom STRIP (new IANA id)	*/
-#define	ARPHRD_IEEE1394	24		/* IEEE 1394 IPv4 - RFC 2734	*/
-#define ARPHRD_EUI64	27		/* EUI-64                       */
-#define ARPHRD_INFINIBAND 32		/* InfiniBand			*/
-
-/* Dummy types for non ARP hardware */
-#define ARPHRD_SLIP	256
-#define ARPHRD_CSLIP	257
-#define ARPHRD_SLIP6	258
-#define ARPHRD_CSLIP6	259
-#define ARPHRD_RSRVD	260		/* Notional KISS type 		*/
-#define ARPHRD_ADAPT	264
-#define ARPHRD_ROSE	270
-#define ARPHRD_X25	271		/* CCITT X.25			*/
-#define ARPHRD_HWX25	272		/* Boards with X.25 in firmware	*/
-#define ARPHRD_CAN	280		/* Controller Area Network      */
-#define ARPHRD_PPP	512
-#define ARPHRD_CISCO	513		/* Cisco HDLC	 		*/
-#define ARPHRD_HDLC	ARPHRD_CISCO
-#define ARPHRD_LAPB	516		/* LAPB				*/
-#define ARPHRD_DDCMP    517		/* Digital's DDCMP protocol     */
-#define ARPHRD_RAWHDLC	518		/* Raw HDLC			*/
-
-#define ARPHRD_TUNNEL	768		/* IPIP tunnel			*/
-#define ARPHRD_TUNNEL6	769		/* IP6IP6 tunnel       		*/
-#define ARPHRD_FRAD	770             /* Frame Relay Access Device    */
-#define ARPHRD_SKIP	771		/* SKIP vif			*/
-#define ARPHRD_LOOPBACK	772		/* Loopback device		*/
-#define ARPHRD_LOCALTLK 773		/* Localtalk device		*/
-#define ARPHRD_FDDI	774		/* Fiber Distributed Data Interface */
-#define ARPHRD_BIF      775             /* AP1000 BIF                   */
-#define ARPHRD_SIT	776		/* sit0 device - IPv6-in-IPv4	*/
-#define ARPHRD_IPDDP	777		/* IP over DDP tunneller	*/
-#define ARPHRD_IPGRE	778		/* GRE over IP			*/
-#define ARPHRD_PIMREG	779		/* PIMSM register interface	*/
-#define ARPHRD_HIPPI	780		/* High Performance Parallel Interface */
-#define ARPHRD_ASH	781		/* Nexus 64Mbps Ash		*/
-#define ARPHRD_ECONET	782		/* Acorn Econet			*/
-#define ARPHRD_IRDA 	783		/* Linux-IrDA			*/
-/* ARP works differently on different FC media .. so  */
-#define ARPHRD_FCPP	784		/* Point to point fibrechannel	*/
-#define ARPHRD_FCAL	785		/* Fibrechannel arbitrated loop */
-#define ARPHRD_FCPL	786		/* Fibrechannel public loop	*/
-#define ARPHRD_FCFABRIC	787		/* Fibrechannel fabric		*/
-	/* 787->799 reserved for fibrechannel media types */
-#define ARPHRD_IEEE802_TR 800		/* Magic type ident for TR	*/
-#define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/
-#define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */
-#define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */
-#define ARPHRD_IEEE802154	  804
-#define ARPHRD_IEEE802154_MONITOR 805	/* IEEE 802.15.4 network monitor */
-
-#define ARPHRD_PHONET	820		/* PhoNet media type		*/
-#define ARPHRD_PHONET_PIPE 821		/* PhoNet pipe header		*/
-#define ARPHRD_CAIF	822		/* CAIF media type		*/
-#define ARPHRD_IP6GRE	823		/* GRE over IPv6		*/
-
-#define ARPHRD_VOID	  0xFFFF	/* Void type, nothing is known */
-#define ARPHRD_NONE	  0xFFFE	/* zero header length */
-
-/* ARP protocol opcodes. */
-#define	ARPOP_REQUEST	1		/* ARP request			*/
-#define	ARPOP_REPLY	2		/* ARP reply			*/
-#define	ARPOP_RREQUEST	3		/* RARP request			*/
-#define	ARPOP_RREPLY	4		/* RARP reply			*/
-#define	ARPOP_InREQUEST	8		/* InARP request		*/
-#define	ARPOP_InREPLY	9		/* InARP reply			*/
-#define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/
-
-
-/* ARP ioctl request. */
-struct arpreq {
-  struct sockaddr	arp_pa;		/* protocol address		*/
-  struct sockaddr	arp_ha;		/* hardware address		*/
-  int			arp_flags;	/* flags			*/
-  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
-  char			arp_dev[16];
-};
-
-struct arpreq_old {
-  struct sockaddr	arp_pa;		/* protocol address		*/
-  struct sockaddr	arp_ha;		/* hardware address		*/
-  int			arp_flags;	/* flags			*/
-  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
-};
-
-/* ARP Flag values. */
-#define ATF_COM		0x02		/* completed entry (ha valid)	*/
-#define	ATF_PERM	0x04		/* permanent entry		*/
-#define	ATF_PUBL	0x08		/* publish entry		*/
-#define	ATF_USETRAILERS	0x10		/* has requested trailers	*/
-#define ATF_NETMASK     0x20            /* want to use a netmask (only
-					   for proxy entries) */
-#define ATF_DONTPUB	0x40		/* don't answer this addresses	*/
-
-/*
- *	This structure defines an ethernet arp header.
- */
-
-struct arphdr {
-	__be16		ar_hrd;		/* format of hardware address	*/
-	__be16		ar_pro;		/* format of protocol address	*/
-	unsigned char	ar_hln;		/* length of hardware address	*/
-	unsigned char	ar_pln;		/* length of protocol address	*/
-	__be16		ar_op;		/* ARP opcode (command)		*/
-
-#if 0
-	 /*
-	  *	 Ethernet looks like this : This bit is variable sized however...
-	  */
-	unsigned char		ar_sha[ETH_ALEN];	/* sender hardware address	*/
-	unsigned char		ar_sip[4];		/* sender IP address		*/
-	unsigned char		ar_tha[ETH_ALEN];	/* target hardware address	*/
-	unsigned char		ar_tip[4];		/* target IP address		*/
-#endif
-
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/if_arp.h>
 
 static inline struct arphdr *arp_hdr(const struct sk_buff *skb)
 {
@@ -168,6 +36,4 @@
 	/* ARP header, plus 2 device addresses, plus 2 IP addresses. */
 	return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2;
 }
-#endif
-
 #endif	/* _LINUX_IF_ARP_H */
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
index dd3f201..1085ffe 100644
--- a/include/linux/if_bridge.h
+++ b/include/linux/if_bridge.h
@@ -9,97 +9,12 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IF_BRIDGE_H
 #define _LINUX_IF_BRIDGE_H
 
-#include <linux/types.h>
-
-#define SYSFS_BRIDGE_ATTR	"bridge"
-#define SYSFS_BRIDGE_FDB	"brforward"
-#define SYSFS_BRIDGE_PORT_SUBDIR "brif"
-#define SYSFS_BRIDGE_PORT_ATTR	"brport"
-#define SYSFS_BRIDGE_PORT_LINK	"bridge"
-
-#define BRCTL_VERSION 1
-
-#define BRCTL_GET_VERSION 0
-#define BRCTL_GET_BRIDGES 1
-#define BRCTL_ADD_BRIDGE 2
-#define BRCTL_DEL_BRIDGE 3
-#define BRCTL_ADD_IF 4
-#define BRCTL_DEL_IF 5
-#define BRCTL_GET_BRIDGE_INFO 6
-#define BRCTL_GET_PORT_LIST 7
-#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
-#define BRCTL_SET_BRIDGE_HELLO_TIME 9
-#define BRCTL_SET_BRIDGE_MAX_AGE 10
-#define BRCTL_SET_AGEING_TIME 11
-#define BRCTL_SET_GC_INTERVAL 12
-#define BRCTL_GET_PORT_INFO 13
-#define BRCTL_SET_BRIDGE_STP_STATE 14
-#define BRCTL_SET_BRIDGE_PRIORITY 15
-#define BRCTL_SET_PORT_PRIORITY 16
-#define BRCTL_SET_PATH_COST 17
-#define BRCTL_GET_FDB_ENTRIES 18
-
-#define BR_STATE_DISABLED 0
-#define BR_STATE_LISTENING 1
-#define BR_STATE_LEARNING 2
-#define BR_STATE_FORWARDING 3
-#define BR_STATE_BLOCKING 4
-
-struct __bridge_info {
-	__u64 designated_root;
-	__u64 bridge_id;
-	__u32 root_path_cost;
-	__u32 max_age;
-	__u32 hello_time;
-	__u32 forward_delay;
-	__u32 bridge_max_age;
-	__u32 bridge_hello_time;
-	__u32 bridge_forward_delay;
-	__u8 topology_change;
-	__u8 topology_change_detected;
-	__u8 root_port;
-	__u8 stp_enabled;
-	__u32 ageing_time;
-	__u32 gc_interval;
-	__u32 hello_timer_value;
-	__u32 tcn_timer_value;
-	__u32 topology_change_timer_value;
-	__u32 gc_timer_value;
-};
-
-struct __port_info {
-	__u64 designated_root;
-	__u64 designated_bridge;
-	__u16 port_id;
-	__u16 designated_port;
-	__u32 path_cost;
-	__u32 designated_cost;
-	__u8 state;
-	__u8 top_change_ack;
-	__u8 config_pending;
-	__u8 unused0;
-	__u32 message_age_timer_value;
-	__u32 forward_delay_timer_value;
-	__u32 hold_timer_value;
-};
-
-struct __fdb_entry {
-	__u8 mac_addr[6];
-	__u8 port_no;
-	__u8 is_local;
-	__u32 ageing_timer_value;
-	__u8 port_hi;
-	__u8 pad0;
-	__u16 unused;
-};
-
-#ifdef __KERNEL__
 
 #include <linux/netdevice.h>
+#include <uapi/linux/if_bridge.h>
 
 extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *));
 
@@ -107,5 +22,3 @@
 extern br_should_route_hook_t __rcu *br_should_route_hook;
 
 #endif
-
-#endif
diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h
index 18a5d02..d984694 100644
--- a/include/linux/if_eql.h
+++ b/include/linux/if_eql.h
@@ -15,28 +15,13 @@
  *    McLean VA 22101
  *    Phone: 1-703-847-0040 ext 103
  */
-
 #ifndef _LINUX_IF_EQL_H
 #define _LINUX_IF_EQL_H
 
-#define EQL_DEFAULT_SLAVE_PRIORITY 28800
-#define EQL_DEFAULT_MAX_SLAVES     4
-#define EQL_DEFAULT_MTU            576
-#define EQL_DEFAULT_RESCHED_IVAL   HZ
-
-#define EQL_ENSLAVE     (SIOCDEVPRIVATE)
-#define EQL_EMANCIPATE  (SIOCDEVPRIVATE + 1)
-
-#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2)
-#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3)
-
-#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4)
-#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5)
-
-#ifdef __KERNEL__
 
 #include <linux/timer.h>
 #include <linux/spinlock.h>
+#include <uapi/linux/if_eql.h>
 
 typedef struct slave {
 	struct list_head	list;
@@ -61,23 +46,4 @@
 	struct timer_list	timer;
 } equalizer_t;  
 
-#endif /* __KERNEL__ */
-
-typedef struct master_config {
-	char	master_name[16];
-	int	max_slaves;
-	int	min_slaves;
-} master_config_t;
-
-typedef struct slave_config {
-	char	slave_name[16];
-	long	priority;
-} slave_config_t;
-
-typedef struct slaving_request {
-	char	slave_name[16];
-	long	priority;
-} slaving_request_t;
-
-
 #endif /* _LINUX_EQL_H */
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 167ce5b..12b4d55 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -17,122 +17,11 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IF_ETHER_H
 #define _LINUX_IF_ETHER_H
 
-#include <linux/types.h>
-
-/*
- *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
- *	and FCS/CRC (frame check sequence).
- */
-
-#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
-#define ETH_HLEN	14		/* Total octets in header.	 */
-#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
-#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
-#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
-#define ETH_FCS_LEN	4		/* Octets in the FCS		 */
-
-/*
- *	These are the defined Ethernet Protocol ID's.
- */
-
-#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
-#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
-#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
-#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
-#define ETH_P_X25	0x0805		/* CCITT X.25			*/
-#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
-#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet	[ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet */
-#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP Addr Trans packet */
-#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
-#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
-#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
-#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
-#define ETH_P_LAT       0x6004          /* DEC LAT                      */
-#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
-#define ETH_P_CUST      0x6006          /* DEC Customer use             */
-#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
-#define ETH_P_TEB	0x6558		/* Trans Ether Bridging		*/
-#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
-#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
-#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
-#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
-#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
-#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
-#define ETH_P_PAUSE	0x8808		/* IEEE Pause frames. See 802.3 31B */
-#define ETH_P_SLOW	0x8809		/* Slow Protocol. See 802.3ad 43B */
-#define ETH_P_WCCP	0x883E		/* Web-cache coordination protocol
-					 * defined in draft-wilson-wrec-wccp-v2-00.txt */
-#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
-#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
-#define ETH_P_MPLS_UC	0x8847		/* MPLS Unicast traffic		*/
-#define ETH_P_MPLS_MC	0x8848		/* MPLS Multicast traffic	*/
-#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
-#define ETH_P_LINK_CTL	0x886c		/* HPNA, wlan link local tunnel */
-#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
-					 * over Ethernet
-					 */
-#define ETH_P_PAE	0x888E		/* Port Access Entity (IEEE 802.1X) */
-#define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
-#define ETH_P_8021AD	0x88A8          /* 802.1ad Service VLAN		*/
-#define ETH_P_802_EX1	0x88B5		/* 802.1 Local Experimental 1.  */
-#define ETH_P_TIPC	0x88CA		/* TIPC 			*/
-#define ETH_P_8021AH	0x88E7          /* 802.1ah Backbone Service Tag */
-#define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
-#define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
-#define ETH_P_TDLS	0x890D          /* TDLS */
-#define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
-#define ETH_P_QINQ1	0x9100		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_QINQ2	0x9200		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_QINQ3	0x9300		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
-#define ETH_P_AF_IUCV   0xFBFB		/* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
-
-/*
- *	Non DIX types. Won't clash for 1500 types.
- */
-
-#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
-#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
-#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
-#define ETH_P_802_2	0x0004		/* 802.2 frames 		*/
-#define ETH_P_SNAP	0x0005		/* Internal only		*/
-#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
-#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
-#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
-#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type 	*/
-#define ETH_P_CAN	0x000C		/* CAN: Controller Area Network */
-#define ETH_P_CANFD	0x000D		/* CANFD: CAN flexible data rate*/
-#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
-#define ETH_P_TR_802_2	0x0011		/* 802.2 frames 		*/
-#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
-#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
-#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
-#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
-#define ETH_P_HDLC	0x0019		/* HDLC frames			*/
-#define ETH_P_ARCNET	0x001A		/* 1A for ArcNet :-)            */
-#define ETH_P_DSA	0x001B		/* Distributed Switch Arch.	*/
-#define ETH_P_TRAILER	0x001C		/* Trailer switch tagging	*/
-#define ETH_P_PHONET	0x00F5		/* Nokia Phonet frames          */
-#define ETH_P_IEEE802154 0x00F6		/* IEEE802.15.4 frame		*/
-#define ETH_P_CAIF	0x00F7		/* ST-Ericsson CAIF protocol	*/
-
-/*
- *	This is an Ethernet frame header.
- */
-
-struct ethhdr {
-	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
-	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
-	__be16		h_proto;		/* packet type ID field	*/
-} __attribute__((packed));
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/if_ether.h>
 
 static inline struct ethhdr *eth_hdr(const struct sk_buff *skb)
 {
@@ -144,6 +33,4 @@
 int mac_pton(const char *s, u8 *mac);
 extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
 
-#endif
-
 #endif	/* _LINUX_IF_ETHER_H */
diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h
index e6dc11e..f5550b3 100644
--- a/include/linux/if_fddi.h
+++ b/include/linux/if_fddi.h
@@ -24,84 +24,8 @@
 #ifndef _LINUX_IF_FDDI_H
 #define _LINUX_IF_FDDI_H
 
-#include <linux/types.h>
-
-/*
- *  Define max and min legal sizes.  The frame sizes do not include
- *  4 byte FCS/CRC (frame check sequence).
- */
-#define FDDI_K_ALEN			6		/* Octets in one FDDI address */
-#define FDDI_K_8022_HLEN	16		/* Total octets in 802.2 header */
-#define FDDI_K_SNAP_HLEN	21		/* Total octets in 802.2 SNAP header */
-#define FDDI_K_8022_ZLEN	16		/* Min octets in 802.2 frame sans FCS */
-#define FDDI_K_SNAP_ZLEN	21		/* Min octets in 802.2 SNAP frame sans FCS */
-#define FDDI_K_8022_DLEN	4475	/* Max octets in 802.2 payload */
-#define FDDI_K_SNAP_DLEN	4470	/* Max octets in 802.2 SNAP payload */
-#define FDDI_K_LLC_ZLEN		13		/* Min octets in LLC frame sans FCS */
-#define FDDI_K_LLC_LEN		4491	/* Max octets in LLC frame sans FCS */
-
-/* Define FDDI Frame Control (FC) Byte values */
-#define FDDI_FC_K_VOID					0x00	
-#define FDDI_FC_K_NON_RESTRICTED_TOKEN	0x80	
-#define FDDI_FC_K_RESTRICTED_TOKEN		0xC0	
-#define FDDI_FC_K_SMT_MIN				0x41
-#define FDDI_FC_K_SMT_MAX		   		0x4F
-#define FDDI_FC_K_MAC_MIN				0xC1
-#define FDDI_FC_K_MAC_MAX		  		0xCF	
-#define FDDI_FC_K_ASYNC_LLC_MIN			0x50
-#define FDDI_FC_K_ASYNC_LLC_DEF			0x54
-#define FDDI_FC_K_ASYNC_LLC_MAX			0x5F
-#define FDDI_FC_K_SYNC_LLC_MIN			0xD0
-#define FDDI_FC_K_SYNC_LLC_MAX			0xD7
-#define FDDI_FC_K_IMPLEMENTOR_MIN		0x60
-#define FDDI_FC_K_IMPLEMENTOR_MAX  		0x6F
-#define FDDI_FC_K_RESERVED_MIN			0x70
-#define FDDI_FC_K_RESERVED_MAX			0x7F
-
-/* Define LLC and SNAP constants */
-#define FDDI_EXTENDED_SAP	0xAA
-#define FDDI_UI_CMD			0x03
-
-/* Define 802.2 Type 1 header */
-struct fddi_8022_1_hdr {
-	__u8	dsap;					/* destination service access point */
-	__u8	ssap;					/* source service access point */
-	__u8	ctrl;					/* control byte #1 */
-} __attribute__((packed));
-
-/* Define 802.2 Type 2 header */
-struct fddi_8022_2_hdr {
-	__u8	dsap;					/* destination service access point */
-	__u8	ssap;					/* source service access point */
-	__u8	ctrl_1;					/* control byte #1 */
-	__u8	ctrl_2;					/* control byte #2 */
-} __attribute__((packed));
-
-/* Define 802.2 SNAP header */
-#define FDDI_K_OUI_LEN	3
-struct fddi_snap_hdr {
-	__u8	dsap;					/* always 0xAA */
-	__u8	ssap;					/* always 0xAA */
-	__u8	ctrl;					/* always 0x03 */
-	__u8	oui[FDDI_K_OUI_LEN];	/* organizational universal id */
-	__be16	ethertype;				/* packet type ID field */
-} __attribute__((packed));
-
-/* Define FDDI LLC frame header */
-struct fddihdr {
-	__u8	fc;						/* frame control */
-	__u8	daddr[FDDI_K_ALEN];		/* destination address */
-	__u8	saddr[FDDI_K_ALEN];		/* source address */
-	union
-		{
-		struct fddi_8022_1_hdr		llc_8022_1;
-		struct fddi_8022_2_hdr		llc_8022_2;
-		struct fddi_snap_hdr		llc_snap;
-		} hdr;
-} __attribute__((packed));
-
-#ifdef __KERNEL__
 #include <linux/netdevice.h>
+#include <uapi/linux/if_fddi.h>
 
 /* Define FDDI statistics structure */
 struct fddi_statistics {
@@ -194,6 +118,4 @@
 	__u32	port_ler_flag[2];
 	__u32	port_hardware_present[2];
 };
-#endif /* __KERNEL__ */
-
 #endif	/* _LINUX_IF_FDDI_H */
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
index 191ee08..4316aa1 100644
--- a/include/linux/if_frad.h
+++ b/include/linux/if_frad.h
@@ -20,105 +20,11 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
-
 #ifndef _FRAD_H_
 #define _FRAD_H_
 
-#include <linux/if.h>
+#include <uapi/linux/if_frad.h>
 
-/* Structures and constants associated with the DLCI device driver */
-
-struct dlci_add
-{
-   char  devname[IFNAMSIZ];
-   short dlci;
-};
-
-#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
-#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
-
-/* 
- * These are related to the Sangoma SDLA and should remain in order. 
- * Code within the SDLA module is based on the specifics of this 
- * structure.  Change at your own peril.
- */
-struct dlci_conf {
-   short flags;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-
-/* these are part of the status read */
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-
-/* add any new fields here above is a mirror of sdla_dlci_conf */
-};
-
-#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
-
-/* configuration flags for DLCI */
-#define DLCI_IGNORE_CIR_OUT	0x0001
-#define DLCI_ACCOUNT_CIR_IN	0x0002
-#define DLCI_BUFFER_IF		0x0008
-
-#define DLCI_VALID_FLAGS	0x000B
-
-/* defines for the actual Frame Relay hardware */
-#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
-#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
-
-#define FRAD_LAST_IOCTL	FRAD_SET_CONF
-
-/*
- * Based on the setup for the Sangoma SDLA.  If changes are 
- * necessary to this structure, a routine will need to be 
- * added to that module to copy fields.
- */
-struct frad_conf 
-{
-   short station;
-   short flags;
-   short kbaud;
-   short clocking;
-   short mtu;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-
-/* Add new fields here, above is a mirror of the sdla_conf */
-
-};
-
-#define FRAD_STATION_CPE	0x0000
-#define FRAD_STATION_NODE	0x0001
-
-#define FRAD_TX_IGNORE_CIR	0x0001
-#define FRAD_RX_ACCOUNT_CIR	0x0002
-#define FRAD_DROP_ABORTED	0x0004
-#define FRAD_BUFFERIF		0x0008
-#define FRAD_STATS		0x0010
-#define FRAD_MCI		0x0100
-#define FRAD_AUTODLCI		0x8000
-#define FRAD_VALID_FLAGS	0x811F
-
-#define FRAD_CLOCK_INT		0x0001
-#define FRAD_CLOCK_EXT		0x0000
-
-#ifdef __KERNEL__
 
 #if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
 
@@ -188,6 +94,4 @@
 
 extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index e4dad4d..c3f817c 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -1,335 +1,8 @@
 #ifndef _LINUX_IF_LINK_H
 #define _LINUX_IF_LINK_H
 
-#include <linux/types.h>
-#include <linux/netlink.h>
+#include <uapi/linux/if_link.h>
 
-/* This struct should be in sync with struct rtnl_link_stats64 */
-struct rtnl_link_stats {
-	__u32	rx_packets;		/* total packets received	*/
-	__u32	tx_packets;		/* total packets transmitted	*/
-	__u32	rx_bytes;		/* total bytes received 	*/
-	__u32	tx_bytes;		/* total bytes transmitted	*/
-	__u32	rx_errors;		/* bad packets received		*/
-	__u32	tx_errors;		/* packet transmit problems	*/
-	__u32	rx_dropped;		/* no space in linux buffers	*/
-	__u32	tx_dropped;		/* no space available in linux	*/
-	__u32	multicast;		/* multicast packets received	*/
-	__u32	collisions;
-
-	/* detailed rx_errors: */
-	__u32	rx_length_errors;
-	__u32	rx_over_errors;		/* receiver ring buff overflow	*/
-	__u32	rx_crc_errors;		/* recved pkt with crc error	*/
-	__u32	rx_frame_errors;	/* recv'd frame alignment error */
-	__u32	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	__u32	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	__u32	tx_aborted_errors;
-	__u32	tx_carrier_errors;
-	__u32	tx_fifo_errors;
-	__u32	tx_heartbeat_errors;
-	__u32	tx_window_errors;
-
-	/* for cslip etc */
-	__u32	rx_compressed;
-	__u32	tx_compressed;
-};
-
-/* The main device statistics structure */
-struct rtnl_link_stats64 {
-	__u64	rx_packets;		/* total packets received	*/
-	__u64	tx_packets;		/* total packets transmitted	*/
-	__u64	rx_bytes;		/* total bytes received 	*/
-	__u64	tx_bytes;		/* total bytes transmitted	*/
-	__u64	rx_errors;		/* bad packets received		*/
-	__u64	tx_errors;		/* packet transmit problems	*/
-	__u64	rx_dropped;		/* no space in linux buffers	*/
-	__u64	tx_dropped;		/* no space available in linux	*/
-	__u64	multicast;		/* multicast packets received	*/
-	__u64	collisions;
-
-	/* detailed rx_errors: */
-	__u64	rx_length_errors;
-	__u64	rx_over_errors;		/* receiver ring buff overflow	*/
-	__u64	rx_crc_errors;		/* recved pkt with crc error	*/
-	__u64	rx_frame_errors;	/* recv'd frame alignment error */
-	__u64	rx_fifo_errors;		/* recv'r fifo overrun		*/
-	__u64	rx_missed_errors;	/* receiver missed packet	*/
-
-	/* detailed tx_errors */
-	__u64	tx_aborted_errors;
-	__u64	tx_carrier_errors;
-	__u64	tx_fifo_errors;
-	__u64	tx_heartbeat_errors;
-	__u64	tx_window_errors;
-
-	/* for cslip etc */
-	__u64	rx_compressed;
-	__u64	tx_compressed;
-};
-
-/* The struct should be in sync with struct ifmap */
-struct rtnl_link_ifmap {
-	__u64	mem_start;
-	__u64	mem_end;
-	__u64	base_addr;
-	__u16	irq;
-	__u8	dma;
-	__u8	port;
-};
-
-/*
- * IFLA_AF_SPEC
- *   Contains nested attributes for address family specific attributes.
- *   Each address family may create a attribute with the address family
- *   number as type and create its own attribute structure in it.
- *
- *   Example:
- *   [IFLA_AF_SPEC] = {
- *       [AF_INET] = {
- *           [IFLA_INET_CONF] = ...,
- *       },
- *       [AF_INET6] = {
- *           [IFLA_INET6_FLAGS] = ...,
- *           [IFLA_INET6_CONF] = ...,
- *       }
- *   }
- */
-
-enum {
-	IFLA_UNSPEC,
-	IFLA_ADDRESS,
-	IFLA_BROADCAST,
-	IFLA_IFNAME,
-	IFLA_MTU,
-	IFLA_LINK,
-	IFLA_QDISC,
-	IFLA_STATS,
-	IFLA_COST,
-#define IFLA_COST IFLA_COST
-	IFLA_PRIORITY,
-#define IFLA_PRIORITY IFLA_PRIORITY
-	IFLA_MASTER,
-#define IFLA_MASTER IFLA_MASTER
-	IFLA_WIRELESS,		/* Wireless Extension event - see wireless.h */
-#define IFLA_WIRELESS IFLA_WIRELESS
-	IFLA_PROTINFO,		/* Protocol specific information for a link */
-#define IFLA_PROTINFO IFLA_PROTINFO
-	IFLA_TXQLEN,
-#define IFLA_TXQLEN IFLA_TXQLEN
-	IFLA_MAP,
-#define IFLA_MAP IFLA_MAP
-	IFLA_WEIGHT,
-#define IFLA_WEIGHT IFLA_WEIGHT
-	IFLA_OPERSTATE,
-	IFLA_LINKMODE,
-	IFLA_LINKINFO,
-#define IFLA_LINKINFO IFLA_LINKINFO
-	IFLA_NET_NS_PID,
-	IFLA_IFALIAS,
-	IFLA_NUM_VF,		/* Number of VFs if device is SR-IOV PF */
-	IFLA_VFINFO_LIST,
-	IFLA_STATS64,
-	IFLA_VF_PORTS,
-	IFLA_PORT_SELF,
-	IFLA_AF_SPEC,
-	IFLA_GROUP,		/* Group the device belongs to */
-	IFLA_NET_NS_FD,
-	IFLA_EXT_MASK,		/* Extended info mask, VFs, etc */
-	IFLA_PROMISCUITY,	/* Promiscuity count: > 0 means acts PROMISC */
-#define IFLA_PROMISCUITY IFLA_PROMISCUITY
-	IFLA_NUM_TX_QUEUES,
-	IFLA_NUM_RX_QUEUES,
-	__IFLA_MAX
-};
-
-
-#define IFLA_MAX (__IFLA_MAX - 1)
-
-/* backwards compatibility for userspace */
-#ifndef __KERNEL__
-#define IFLA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
-#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
-#endif
-
-enum {
-	IFLA_INET_UNSPEC,
-	IFLA_INET_CONF,
-	__IFLA_INET_MAX,
-};
-
-#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
-
-/* ifi_flags.
-
-   IFF_* flags.
-
-   The only change is:
-   IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
-   more not changeable by user. They describe link media
-   characteristics and set by device driver.
-
-   Comments:
-   - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
-   - If neither of these three flags are set;
-     the interface is NBMA.
-
-   - IFF_MULTICAST does not mean anything special:
-   multicasts can be used on all not-NBMA links.
-   IFF_MULTICAST means that this media uses special encapsulation
-   for multicast frames. Apparently, all IFF_POINTOPOINT and
-   IFF_BROADCAST devices are able to use multicasts too.
- */
-
-/* IFLA_LINK.
-   For usual devices it is equal ifi_index.
-   If it is a "virtual interface" (f.e. tunnel), ifi_link
-   can point to real physical interface (f.e. for bandwidth calculations),
-   or maybe 0, what means, that real media is unknown (usual
-   for IPIP tunnels, when route to endpoint is allowed to change)
- */
-
-/* Subtype attributes for IFLA_PROTINFO */
-enum {
-	IFLA_INET6_UNSPEC,
-	IFLA_INET6_FLAGS,	/* link flags			*/
-	IFLA_INET6_CONF,	/* sysctl parameters		*/
-	IFLA_INET6_STATS,	/* statistics			*/
-	IFLA_INET6_MCAST,	/* MC things. What of them?	*/
-	IFLA_INET6_CACHEINFO,	/* time values and max reasm size */
-	IFLA_INET6_ICMP6STATS,	/* statistics (icmpv6)		*/
-	__IFLA_INET6_MAX
-};
-
-#define IFLA_INET6_MAX	(__IFLA_INET6_MAX - 1)
-
-struct ifla_cacheinfo {
-	__u32	max_reasm_len;
-	__u32	tstamp;		/* ipv6InterfaceTable updated timestamp */
-	__u32	reachable_time;
-	__u32	retrans_time;
-};
-
-enum {
-	IFLA_INFO_UNSPEC,
-	IFLA_INFO_KIND,
-	IFLA_INFO_DATA,
-	IFLA_INFO_XSTATS,
-	__IFLA_INFO_MAX,
-};
-
-#define IFLA_INFO_MAX	(__IFLA_INFO_MAX - 1)
-
-/* VLAN section */
-
-enum {
-	IFLA_VLAN_UNSPEC,
-	IFLA_VLAN_ID,
-	IFLA_VLAN_FLAGS,
-	IFLA_VLAN_EGRESS_QOS,
-	IFLA_VLAN_INGRESS_QOS,
-	__IFLA_VLAN_MAX,
-};
-
-#define IFLA_VLAN_MAX	(__IFLA_VLAN_MAX - 1)
-
-struct ifla_vlan_flags {
-	__u32	flags;
-	__u32	mask;
-};
-
-enum {
-	IFLA_VLAN_QOS_UNSPEC,
-	IFLA_VLAN_QOS_MAPPING,
-	__IFLA_VLAN_QOS_MAX
-};
-
-#define IFLA_VLAN_QOS_MAX	(__IFLA_VLAN_QOS_MAX - 1)
-
-struct ifla_vlan_qos_mapping {
-	__u32 from;
-	__u32 to;
-};
-
-/* MACVLAN section */
-enum {
-	IFLA_MACVLAN_UNSPEC,
-	IFLA_MACVLAN_MODE,
-	IFLA_MACVLAN_FLAGS,
-	__IFLA_MACVLAN_MAX,
-};
-
-#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
-
-enum macvlan_mode {
-	MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
-	MACVLAN_MODE_VEPA    = 2, /* talk to other ports through ext bridge */
-	MACVLAN_MODE_BRIDGE  = 4, /* talk to bridge ports directly */
-	MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
-};
-
-#define MACVLAN_FLAG_NOPROMISC	1
-
-/* VXLAN section */
-enum {
-	IFLA_VXLAN_UNSPEC,
-	IFLA_VXLAN_ID,
-	IFLA_VXLAN_GROUP,
-	IFLA_VXLAN_LINK,
-	IFLA_VXLAN_LOCAL,
-	IFLA_VXLAN_TTL,
-	IFLA_VXLAN_TOS,
-	IFLA_VXLAN_LEARNING,
-	IFLA_VXLAN_AGEING,
-	IFLA_VXLAN_LIMIT,
-	__IFLA_VXLAN_MAX
-};
-#define IFLA_VXLAN_MAX	(__IFLA_VXLAN_MAX - 1)
-
-/* SR-IOV virtual function management section */
-
-enum {
-	IFLA_VF_INFO_UNSPEC,
-	IFLA_VF_INFO,
-	__IFLA_VF_INFO_MAX,
-};
-
-#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
-
-enum {
-	IFLA_VF_UNSPEC,
-	IFLA_VF_MAC,		/* Hardware queue specific attributes */
-	IFLA_VF_VLAN,
-	IFLA_VF_TX_RATE,	/* TX Bandwidth Allocation */
-	IFLA_VF_SPOOFCHK,	/* Spoof Checking on/off switch */
-	__IFLA_VF_MAX,
-};
-
-#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
-
-struct ifla_vf_mac {
-	__u32 vf;
-	__u8 mac[32]; /* MAX_ADDR_LEN */
-};
-
-struct ifla_vf_vlan {
-	__u32 vf;
-	__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
-	__u32 qos;
-};
-
-struct ifla_vf_tx_rate {
-	__u32 vf;
-	__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
-};
-
-struct ifla_vf_spoofchk {
-	__u32 vf;
-	__u32 setting;
-};
-#ifdef __KERNEL__
 
 /* We don't want this structure exposed to user space */
 struct ifla_vf_info {
@@ -340,96 +13,4 @@
 	__u32 tx_rate;
 	__u32 spoofchk;
 };
-#endif
-
-/* VF ports management section
- *
- *	Nested layout of set/get msg is:
- *
- *		[IFLA_NUM_VF]
- *		[IFLA_VF_PORTS]
- *			[IFLA_VF_PORT]
- *				[IFLA_PORT_*], ...
- *			[IFLA_VF_PORT]
- *				[IFLA_PORT_*], ...
- *			...
- *		[IFLA_PORT_SELF]
- *			[IFLA_PORT_*], ...
- */
-
-enum {
-	IFLA_VF_PORT_UNSPEC,
-	IFLA_VF_PORT,			/* nest */
-	__IFLA_VF_PORT_MAX,
-};
-
-#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
-
-enum {
-	IFLA_PORT_UNSPEC,
-	IFLA_PORT_VF,			/* __u32 */
-	IFLA_PORT_PROFILE,		/* string */
-	IFLA_PORT_VSI_TYPE,		/* 802.1Qbg (pre-)standard VDP */
-	IFLA_PORT_INSTANCE_UUID,	/* binary UUID */
-	IFLA_PORT_HOST_UUID,		/* binary UUID */
-	IFLA_PORT_REQUEST,		/* __u8 */
-	IFLA_PORT_RESPONSE,		/* __u16, output only */
-	__IFLA_PORT_MAX,
-};
-
-#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
-
-#define PORT_PROFILE_MAX	40
-#define PORT_UUID_MAX		16
-#define PORT_SELF_VF		-1
-
-enum {
-	PORT_REQUEST_PREASSOCIATE = 0,
-	PORT_REQUEST_PREASSOCIATE_RR,
-	PORT_REQUEST_ASSOCIATE,
-	PORT_REQUEST_DISASSOCIATE,
-};
-
-enum {
-	PORT_VDP_RESPONSE_SUCCESS = 0,
-	PORT_VDP_RESPONSE_INVALID_FORMAT,
-	PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
-	PORT_VDP_RESPONSE_UNUSED_VTID,
-	PORT_VDP_RESPONSE_VTID_VIOLATION,
-	PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
-	PORT_VDP_RESPONSE_OUT_OF_SYNC,
-	/* 0x08-0xFF reserved for future VDP use */
-	PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
-	PORT_PROFILE_RESPONSE_INPROGRESS,
-	PORT_PROFILE_RESPONSE_INVALID,
-	PORT_PROFILE_RESPONSE_BADSTATE,
-	PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
-	PORT_PROFILE_RESPONSE_ERROR,
-};
-
-struct ifla_port_vsi {
-	__u8 vsi_mgr_id;
-	__u8 vsi_type_id[3];
-	__u8 vsi_type_version;
-	__u8 pad[3];
-};
-
-
-/* IPoIB section */
-
-enum {
-	IFLA_IPOIB_UNSPEC,
-	IFLA_IPOIB_PKEY,
-	IFLA_IPOIB_MODE,
-	IFLA_IPOIB_UMCAST,
-	__IFLA_IPOIB_MAX
-};
-
-enum {
-	IPOIB_MODE_DATAGRAM  = 0, /* using unreliable datagram QPs */
-	IPOIB_MODE_CONNECTED = 1, /* using connected QPs */
-};
-
-#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
-
 #endif /* _LINUX_IF_LINK_H */
diff --git a/include/linux/if_ltalk.h b/include/linux/if_ltalk.h
index 7652576..81e434c 100644
--- a/include/linux/if_ltalk.h
+++ b/include/linux/if_ltalk.h
@@ -1,12 +1,7 @@
 #ifndef __LINUX_LTALK_H
 #define __LINUX_LTALK_H
 
-#define LTALK_HLEN		1
-#define LTALK_MTU		600
-#define LTALK_ALEN		1
+#include <uapi/linux/if_ltalk.h>
 
-#ifdef __KERNEL__
 extern struct net_device *alloc_ltalkdev(int sizeof_priv);
 #endif
-
-#endif
diff --git a/include/linux/if_phonet.h b/include/linux/if_phonet.h
index d70034b..bbcdb0a 100644
--- a/include/linux/if_phonet.h
+++ b/include/linux/if_phonet.h
@@ -8,12 +8,7 @@
 #ifndef LINUX_IF_PHONET_H
 #define LINUX_IF_PHONET_H
 
-#define PHONET_MIN_MTU		6	/* pn_length = 0 */
-#define PHONET_MAX_MTU		65541	/* pn_length = 0xffff */
-#define PHONET_DEV_MTU		PHONET_MAX_MTU
+#include <uapi/linux/if_phonet.h>
 
-#ifdef __KERNEL__
 extern struct header_ops phonet_header_ops;
 #endif
-
-#endif
diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h
index b477541..0fb71e5 100644
--- a/include/linux/if_pppol2tp.h
+++ b/include/linux/if_pppol2tp.h
@@ -11,98 +11,11 @@
  *		2 of the License, or (at your option) any later version.
  *
  */
-
 #ifndef __LINUX_IF_PPPOL2TP_H
 #define __LINUX_IF_PPPOL2TP_H
 
-#include <linux/types.h>
-
-#ifdef __KERNEL__
 #include <linux/in.h>
 #include <linux/in6.h>
-#endif
-
-/* Structure used to connect() the socket to a particular tunnel UDP
- * socket over IPv4.
- */
-struct pppol2tp_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP socket to use */
-
-	struct sockaddr_in addr;	/* IP address and port to send to */
-
-	__u16 s_tunnel, s_session;	/* For matching incoming packets */
-	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
-};
-
-/* Structure used to connect() the socket to a particular tunnel UDP
- * socket over IPv6.
- */
-struct pppol2tpin6_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP socket to use */
-
-	__u16 s_tunnel, s_session;	/* For matching incoming packets */
-	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
-
-	struct sockaddr_in6 addr;	/* IP address and port to send to */
-};
-
-/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
- * bits. So we need a different sockaddr structure.
- */
-struct pppol2tpv3_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP or IP socket to use */
-
-	struct sockaddr_in addr;	/* IP address and port to send to */
-
-	__u32 s_tunnel, s_session;	/* For matching incoming packets */
-	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
-};
-
-struct pppol2tpv3in6_addr {
-	__kernel_pid_t	pid;		/* pid that owns the fd.
-					 * 0 => current */
-	int	fd;			/* FD of UDP or IP socket to use */
-
-	__u32 s_tunnel, s_session;	/* For matching incoming packets */
-	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
-
-	struct sockaddr_in6 addr;	/* IP address and port to send to */
-};
-
-/* Socket options:
- * DEBUG	- bitmask of debug message categories
- * SENDSEQ	- 0 => don't send packets with sequence numbers
- *		  1 => send packets with sequence numbers
- * RECVSEQ	- 0 => receive packet sequence numbers are optional
- *		  1 => drop receive packets without sequence numbers
- * LNSMODE	- 0 => act as LAC.
- *		  1 => act as LNS.
- * REORDERTO	- reorder timeout (in millisecs). If 0, don't try to reorder.
- */
-enum {
-	PPPOL2TP_SO_DEBUG	= 1,
-	PPPOL2TP_SO_RECVSEQ	= 2,
-	PPPOL2TP_SO_SENDSEQ	= 3,
-	PPPOL2TP_SO_LNSMODE	= 4,
-	PPPOL2TP_SO_REORDERTO	= 5,
-};
-
-/* Debug message categories for the DEBUG socket option */
-enum {
-	PPPOL2TP_MSG_DEBUG	= (1 << 0),	/* verbose debug (if
-						 * compiled in) */
-	PPPOL2TP_MSG_CONTROL	= (1 << 1),	/* userspace - kernel
-						 * interface */
-	PPPOL2TP_MSG_SEQ	= (1 << 2),	/* sequence numbers */
-	PPPOL2TP_MSG_DATA	= (1 << 3),	/* data packets */
-};
-
-
+#include <uapi/linux/if_pppol2tp.h>
 
 #endif
diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
index 09c474c..aff7ad8 100644
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -12,153 +12,14 @@
  *		2 of the License, or (at your option) any later version.
  *
  */
-
 #ifndef __LINUX_IF_PPPOX_H
 #define __LINUX_IF_PPPOX_H
 
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#include <linux/socket.h>
-#include <linux/if_ether.h>
-#ifdef  __KERNEL__
 #include <linux/if.h>
 #include <linux/netdevice.h>
 #include <linux/ppp_channel.h>
-#endif /* __KERNEL__ */
-#include <linux/if_pppol2tp.h>
-
-/* For user-space programs to pick up these definitions
- * which they wouldn't get otherwise without defining __KERNEL__
- */
-#ifndef AF_PPPOX
-#define AF_PPPOX	24
-#define PF_PPPOX	AF_PPPOX
-#endif /* !(AF_PPPOX) */
-
-/************************************************************************ 
- * PPPoE addressing definition 
- */ 
-typedef __be16 sid_t;
-struct pppoe_addr {
-	sid_t         sid;                    /* Session identifier */
-	unsigned char remote[ETH_ALEN];       /* Remote address */
-	char          dev[IFNAMSIZ];          /* Local device to use */
-}; 
- 
-/************************************************************************ 
- * PPTP addressing definition
- */
-struct pptp_addr {
-	__be16		call_id;
-	struct in_addr	sin_addr;
-};
-
-/************************************************************************
- * Protocols supported by AF_PPPOX
- */
-#define PX_PROTO_OE    0 /* Currently just PPPoE */
-#define PX_PROTO_OL2TP 1 /* Now L2TP also */
-#define PX_PROTO_PPTP  2
-#define PX_MAX_PROTO   3
-
-struct sockaddr_pppox {
-	__kernel_sa_family_t sa_family;       /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;          /* protocol identifier */
-	union {
-		struct pppoe_addr  pppoe;
-		struct pptp_addr   pptp;
-	} sa_addr;
-} __packed;
-
-/* The use of the above union isn't viable because the size of this
- * struct must stay fixed over time -- applications use sizeof(struct
- * sockaddr_pppox) to fill it. We use a protocol specific sockaddr
- * type instead.
- */
-struct sockaddr_pppol2tp {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tp_addr pppol2tp;
-} __packed;
-
-struct sockaddr_pppol2tpin6 {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tpin6_addr pppol2tp;
-} __packed;
-
-/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
- * bits. So we need a different sockaddr structure.
- */
-struct sockaddr_pppol2tpv3 {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tpv3_addr pppol2tp;
-} __packed;
-
-struct sockaddr_pppol2tpv3in6 {
-	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
-	unsigned int    sa_protocol;    /* protocol identifier */
-	struct pppol2tpv3in6_addr pppol2tp;
-} __packed;
-
-/*********************************************************************
- *
- * ioctl interface for defining forwarding of connections
- *
- ********************************************************************/
-
-#define PPPOEIOCSFWD	_IOW(0xB1 ,0, size_t)
-#define PPPOEIOCDFWD	_IO(0xB1 ,1)
-/*#define PPPOEIOCGFWD	_IOWR(0xB1,2, size_t)*/
-
-/* Codes to identify message types */
-#define PADI_CODE	0x09
-#define PADO_CODE	0x07
-#define PADR_CODE	0x19
-#define PADS_CODE	0x65
-#define PADT_CODE	0xa7
-struct pppoe_tag {
-	__be16 tag_type;
-	__be16 tag_len;
-	char tag_data[0];
-} __attribute__ ((packed));
-
-/* Tag identifiers */
-#define PTT_EOL		__cpu_to_be16(0x0000)
-#define PTT_SRV_NAME	__cpu_to_be16(0x0101)
-#define PTT_AC_NAME	__cpu_to_be16(0x0102)
-#define PTT_HOST_UNIQ	__cpu_to_be16(0x0103)
-#define PTT_AC_COOKIE	__cpu_to_be16(0x0104)
-#define PTT_VENDOR 	__cpu_to_be16(0x0105)
-#define PTT_RELAY_SID	__cpu_to_be16(0x0110)
-#define PTT_SRV_ERR     __cpu_to_be16(0x0201)
-#define PTT_SYS_ERR  	__cpu_to_be16(0x0202)
-#define PTT_GEN_ERR  	__cpu_to_be16(0x0203)
-
-struct pppoe_hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 ver : 4;
-	__u8 type : 4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8 type : 4;
-	__u8 ver : 4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8 code;
-	__be16 sid;
-	__be16 length;
-	struct pppoe_tag tag[0];
-} __packed;
-
-/* Length of entire PPPoE + PPP header */
-#define PPPOE_SES_HLEN	8
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/if_pppox.h>
 
 static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb)
 {
@@ -232,6 +93,4 @@
     PPPOX_DEAD		= 16  /* dead, useless, please clean me up!*/
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* !(__LINUX_IF_PPPOX_H) */
diff --git a/include/linux/if_team.h b/include/linux/if_team.h
index 6d88a7f..0245def 100644
--- a/include/linux/if_team.h
+++ b/include/linux/if_team.h
@@ -7,14 +7,13 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
 #ifndef _LINUX_IF_TEAM_H_
 #define _LINUX_IF_TEAM_H_
 
-#ifdef __KERNEL__
 
 #include <linux/netpoll.h>
 #include <net/sch_generic.h>
+#include <uapi/linux/if_team.h>
 
 struct team_pcpu_stats {
 	u64			rx_packets;
@@ -251,98 +250,4 @@
 #define TEAM_DEFAULT_NUM_TX_QUEUES 16
 #define TEAM_DEFAULT_NUM_RX_QUEUES 16
 
-#endif /* __KERNEL__ */
-
-#define TEAM_STRING_MAX_LEN 32
-
-/**********************************
- * NETLINK_GENERIC netlink family.
- **********************************/
-
-enum {
-	TEAM_CMD_NOOP,
-	TEAM_CMD_OPTIONS_SET,
-	TEAM_CMD_OPTIONS_GET,
-	TEAM_CMD_PORT_LIST_GET,
-
-	__TEAM_CMD_MAX,
-	TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1),
-};
-
-enum {
-	TEAM_ATTR_UNSPEC,
-	TEAM_ATTR_TEAM_IFINDEX,		/* u32 */
-	TEAM_ATTR_LIST_OPTION,		/* nest */
-	TEAM_ATTR_LIST_PORT,		/* nest */
-
-	__TEAM_ATTR_MAX,
-	TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1,
-};
-
-/* Nested layout of get/set msg:
- *
- *	[TEAM_ATTR_LIST_OPTION]
- *		[TEAM_ATTR_ITEM_OPTION]
- *			[TEAM_ATTR_OPTION_*], ...
- *		[TEAM_ATTR_ITEM_OPTION]
- *			[TEAM_ATTR_OPTION_*], ...
- *		...
- *	[TEAM_ATTR_LIST_PORT]
- *		[TEAM_ATTR_ITEM_PORT]
- *			[TEAM_ATTR_PORT_*], ...
- *		[TEAM_ATTR_ITEM_PORT]
- *			[TEAM_ATTR_PORT_*], ...
- *		...
- */
-
-enum {
-	TEAM_ATTR_ITEM_OPTION_UNSPEC,
-	TEAM_ATTR_ITEM_OPTION,		/* nest */
-
-	__TEAM_ATTR_ITEM_OPTION_MAX,
-	TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1,
-};
-
-enum {
-	TEAM_ATTR_OPTION_UNSPEC,
-	TEAM_ATTR_OPTION_NAME,		/* string */
-	TEAM_ATTR_OPTION_CHANGED,	/* flag */
-	TEAM_ATTR_OPTION_TYPE,		/* u8 */
-	TEAM_ATTR_OPTION_DATA,		/* dynamic */
-	TEAM_ATTR_OPTION_REMOVED,	/* flag */
-	TEAM_ATTR_OPTION_PORT_IFINDEX,	/* u32 */ /* for per-port options */
-	TEAM_ATTR_OPTION_ARRAY_INDEX,	/* u32 */ /* for array options */
-
-	__TEAM_ATTR_OPTION_MAX,
-	TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1,
-};
-
-enum {
-	TEAM_ATTR_ITEM_PORT_UNSPEC,
-	TEAM_ATTR_ITEM_PORT,		/* nest */
-
-	__TEAM_ATTR_ITEM_PORT_MAX,
-	TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1,
-};
-
-enum {
-	TEAM_ATTR_PORT_UNSPEC,
-	TEAM_ATTR_PORT_IFINDEX,		/* u32 */
-	TEAM_ATTR_PORT_CHANGED,		/* flag */
-	TEAM_ATTR_PORT_LINKUP,		/* flag */
-	TEAM_ATTR_PORT_SPEED,		/* u32 */
-	TEAM_ATTR_PORT_DUPLEX,		/* u8 */
-	TEAM_ATTR_PORT_REMOVED,		/* flag */
-
-	__TEAM_ATTR_PORT_MAX,
-	TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1,
-};
-
-/*
- * NETLINK_GENERIC related info
- */
-#define TEAM_GENL_NAME "team"
-#define TEAM_GENL_VERSION 0x1
-#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event"
-
 #endif /* _LINUX_IF_TEAM_H_ */
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 06b1829..ed6da2e 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -12,86 +12,11 @@
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  *  GNU General Public License for more details.
  */
-
 #ifndef __IF_TUN_H
 #define __IF_TUN_H
 
-#include <linux/types.h>
-#include <linux/if_ether.h>
-#include <linux/filter.h>
+#include <uapi/linux/if_tun.h>
 
-/* Read queue size */
-#define TUN_READQ_SIZE	500
-
-/* TUN device flags */
-#define TUN_TUN_DEV 	0x0001	
-#define TUN_TAP_DEV	0x0002
-#define TUN_TYPE_MASK   0x000f
-
-#define TUN_FASYNC	0x0010
-#define TUN_NOCHECKSUM	0x0020
-#define TUN_NO_PI	0x0040
-#define TUN_ONE_QUEUE	0x0080
-#define TUN_PERSIST 	0x0100	
-#define TUN_VNET_HDR 	0x0200
-
-/* Ioctl defines */
-#define TUNSETNOCSUM  _IOW('T', 200, int) 
-#define TUNSETDEBUG   _IOW('T', 201, int) 
-#define TUNSETIFF     _IOW('T', 202, int) 
-#define TUNSETPERSIST _IOW('T', 203, int) 
-#define TUNSETOWNER   _IOW('T', 204, int)
-#define TUNSETLINK    _IOW('T', 205, int)
-#define TUNSETGROUP   _IOW('T', 206, int)
-#define TUNGETFEATURES _IOR('T', 207, unsigned int)
-#define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
-#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
-#define TUNGETIFF      _IOR('T', 210, unsigned int)
-#define TUNGETSNDBUF   _IOR('T', 211, int)
-#define TUNSETSNDBUF   _IOW('T', 212, int)
-#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog)
-#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog)
-#define TUNGETVNETHDRSZ _IOR('T', 215, int)
-#define TUNSETVNETHDRSZ _IOW('T', 216, int)
-
-/* TUNSETIFF ifr flags */
-#define IFF_TUN		0x0001
-#define IFF_TAP		0x0002
-#define IFF_NO_PI	0x1000
-#define IFF_ONE_QUEUE	0x2000
-#define IFF_VNET_HDR	0x4000
-#define IFF_TUN_EXCL	0x8000
-
-/* Features for GSO (TUNSETOFFLOAD). */
-#define TUN_F_CSUM	0x01	/* You can hand me unchecksummed packets. */
-#define TUN_F_TSO4	0x02	/* I can handle TSO for IPv4 packets */
-#define TUN_F_TSO6	0x04	/* I can handle TSO for IPv6 packets */
-#define TUN_F_TSO_ECN	0x08	/* I can handle TSO with ECN bits. */
-#define TUN_F_UFO	0x10	/* I can handle UFO packets */
-
-/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
-#define TUN_PKT_STRIP	0x0001
-struct tun_pi {
-	__u16  flags;
-	__be16 proto;
-};
-
-/*
- * Filter spec (used for SETXXFILTER ioctls)
- * This stuff is applicable only to the TAP (Ethernet) devices.
- * If the count is zero the filter is disabled and the driver accepts
- * all packets (promisc mode).
- * If the filter is enabled in order to accept broadcast packets
- * broadcast addr must be explicitly included in the addr list.
- */
-#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
-struct tun_filter {
-	__u16  flags; /* TUN_FLT_ flags see above */
-	__u16  count; /* Number of addresses */
-	__u8   addr[0][ETH_ALEN];
-};
-
-#ifdef __KERNEL__
 #if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE)
 struct socket *tun_get_socket(struct file *);
 #else
@@ -104,5 +29,4 @@
 	return ERR_PTR(-EINVAL);
 }
 #endif /* CONFIG_TUN */
-#endif /* __KERNEL__ */
 #endif /* __IF_TUN_H */
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index 8c5035ac..1cc595a 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -1,100 +1,8 @@
 #ifndef _IF_TUNNEL_H_
 #define _IF_TUNNEL_H_
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#ifdef __KERNEL__
 #include <linux/ip.h>
 #include <linux/in6.h>
-#endif
+#include <uapi/linux/if_tunnel.h>
 
-#define SIOCGETTUNNEL   (SIOCDEVPRIVATE + 0)
-#define SIOCADDTUNNEL   (SIOCDEVPRIVATE + 1)
-#define SIOCDELTUNNEL   (SIOCDEVPRIVATE + 2)
-#define SIOCCHGTUNNEL   (SIOCDEVPRIVATE + 3)
-#define SIOCGETPRL      (SIOCDEVPRIVATE + 4)
-#define SIOCADDPRL      (SIOCDEVPRIVATE + 5)
-#define SIOCDELPRL      (SIOCDEVPRIVATE + 6)
-#define SIOCCHGPRL      (SIOCDEVPRIVATE + 7)
-#define SIOCGET6RD      (SIOCDEVPRIVATE + 8)
-#define SIOCADD6RD      (SIOCDEVPRIVATE + 9)
-#define SIOCDEL6RD      (SIOCDEVPRIVATE + 10)
-#define SIOCCHG6RD      (SIOCDEVPRIVATE + 11)
-
-#define GRE_CSUM	__cpu_to_be16(0x8000)
-#define GRE_ROUTING	__cpu_to_be16(0x4000)
-#define GRE_KEY		__cpu_to_be16(0x2000)
-#define GRE_SEQ		__cpu_to_be16(0x1000)
-#define GRE_STRICT	__cpu_to_be16(0x0800)
-#define GRE_REC		__cpu_to_be16(0x0700)
-#define GRE_FLAGS	__cpu_to_be16(0x00F8)
-#define GRE_VERSION	__cpu_to_be16(0x0007)
-
-struct ip_tunnel_parm {
-	char			name[IFNAMSIZ];
-	int			link;
-	__be16			i_flags;
-	__be16			o_flags;
-	__be32			i_key;
-	__be32			o_key;
-	struct iphdr		iph;
-};
-
-/* SIT-mode i_flags */
-#define	SIT_ISATAP	0x0001
-
-struct ip_tunnel_prl {
-	__be32			addr;
-	__u16			flags;
-	__u16			__reserved;
-	__u32			datalen;
-	__u32			__reserved2;
-	/* data follows */
-};
-
-/* PRL flags */
-#define	PRL_DEFAULT		0x0001
-
-struct ip_tunnel_6rd {
-	struct in6_addr		prefix;
-	__be32			relay_prefix;
-	__u16			prefixlen;
-	__u16			relay_prefixlen;
-};
-
-enum {
-	IFLA_GRE_UNSPEC,
-	IFLA_GRE_LINK,
-	IFLA_GRE_IFLAGS,
-	IFLA_GRE_OFLAGS,
-	IFLA_GRE_IKEY,
-	IFLA_GRE_OKEY,
-	IFLA_GRE_LOCAL,
-	IFLA_GRE_REMOTE,
-	IFLA_GRE_TTL,
-	IFLA_GRE_TOS,
-	IFLA_GRE_PMTUDISC,
-	IFLA_GRE_ENCAP_LIMIT,
-	IFLA_GRE_FLOWINFO,
-	IFLA_GRE_FLAGS,
-	__IFLA_GRE_MAX,
-};
-
-#define IFLA_GRE_MAX	(__IFLA_GRE_MAX - 1)
-
-/* VTI-mode i_flags */
-#define VTI_ISVTI 0x0001
-
-enum {
-	IFLA_VTI_UNSPEC,
-	IFLA_VTI_LINK,
-	IFLA_VTI_IKEY,
-	IFLA_VTI_OKEY,
-	IFLA_VTI_LOCAL,
-	IFLA_VTI_REMOTE,
-	__IFLA_VTI_MAX,
-};
-
-#define IFLA_VTI_MAX	(__IFLA_VTI_MAX - 1)
 #endif /* _IF_TUNNEL_H_ */
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index c0ff748..d06cc5c 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -9,15 +9,14 @@
  *		2 of the License, or (at your option) any later version.
  *
  */
-
 #ifndef _LINUX_IF_VLAN_H_
 #define _LINUX_IF_VLAN_H_
 
-#ifdef __KERNEL__
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/rtnetlink.h>
 #include <linux/bug.h>
+#include <uapi/linux/if_vlan.h>
 
 #define VLAN_HLEN	4		/* The additional bytes required by VLAN
 					 * (in addition to the Ethernet header)
@@ -361,52 +360,4 @@
 		 */
 		skb->protocol = htons(ETH_P_802_2);
 }
-#endif /* __KERNEL__ */
-
-/* VLAN IOCTLs are found in sockios.h */
-
-/* Passed in vlan_ioctl_args structure to determine behaviour. */
-enum vlan_ioctl_cmds {
-	ADD_VLAN_CMD,
-	DEL_VLAN_CMD,
-	SET_VLAN_INGRESS_PRIORITY_CMD,
-	SET_VLAN_EGRESS_PRIORITY_CMD,
-	GET_VLAN_INGRESS_PRIORITY_CMD,
-	GET_VLAN_EGRESS_PRIORITY_CMD,
-	SET_VLAN_NAME_TYPE_CMD,
-	SET_VLAN_FLAG_CMD,
-	GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */
-	GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
-};
-
-enum vlan_flags {
-	VLAN_FLAG_REORDER_HDR	= 0x1,
-	VLAN_FLAG_GVRP		= 0x2,
-	VLAN_FLAG_LOOSE_BINDING	= 0x4,
-};
-
-enum vlan_name_types {
-	VLAN_NAME_TYPE_PLUS_VID, /* Name will look like:  vlan0005 */
-	VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like:  eth1.0005 */
-	VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like:  vlan5 */
-	VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like:  eth0.5 */
-	VLAN_NAME_TYPE_HIGHEST
-};
-
-struct vlan_ioctl_args {
-	int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */
-	char device1[24];
-
-        union {
-		char device2[24];
-		int VID;
-		unsigned int skb_priority;
-		unsigned int name_type;
-		unsigned int bind_type;
-		unsigned int flag; /* Matches vlan_dev_priv flags */
-        } u;
-
-	short vlan_qos;   
-};
-
 #endif /* !(_LINUX_IF_VLAN_H_) */
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index 82de336..7f2bf15 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -12,123 +12,13 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IGMP_H
 #define _LINUX_IGMP_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*
- *	IGMP protocol structures
- */
-
-/*
- *	Header in on cable format
- */
-
-struct igmphdr {
-	__u8 type;
-	__u8 code;		/* For newer IGMP */
-	__sum16 csum;
-	__be32 group;
-};
-
-/* V3 group record types [grec_type] */
-#define IGMPV3_MODE_IS_INCLUDE		1
-#define IGMPV3_MODE_IS_EXCLUDE		2
-#define IGMPV3_CHANGE_TO_INCLUDE	3
-#define IGMPV3_CHANGE_TO_EXCLUDE	4
-#define IGMPV3_ALLOW_NEW_SOURCES	5
-#define IGMPV3_BLOCK_OLD_SOURCES	6
-
-struct igmpv3_grec {
-	__u8	grec_type;
-	__u8	grec_auxwords;
-	__be16	grec_nsrcs;
-	__be32	grec_mca;
-	__be32	grec_src[0];
-};
-
-struct igmpv3_report {
-	__u8 type;
-	__u8 resv1;
-	__be16 csum;
-	__be16 resv2;
-	__be16 ngrec;
-	struct igmpv3_grec grec[0];
-};
-
-struct igmpv3_query {
-	__u8 type;
-	__u8 code;
-	__be16 csum;
-	__be32 group;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8 qrv:3,
-	     suppress:1,
-	     resv:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8 resv:4,
-	     suppress:1,
-	     qrv:3;
-#else
-#error "Please fix <asm/byteorder.h>"
-#endif
-	__u8 qqic;
-	__be16 nsrcs;
-	__be32 srcs[0];
-};
-
-#define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
-#define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
-#define IGMP_DVMRP			0x13	/* DVMRP routing */
-#define IGMP_PIM			0x14	/* PIM routing */
-#define IGMP_TRACE			0x15
-#define IGMPV2_HOST_MEMBERSHIP_REPORT	0x16	/* V2 version of 0x12 */
-#define IGMP_HOST_LEAVE_MESSAGE 	0x17
-#define IGMPV3_HOST_MEMBERSHIP_REPORT	0x22	/* V3 version of 0x12 */
-
-#define IGMP_MTRACE_RESP		0x1e
-#define IGMP_MTRACE			0x1f
-
-
-/*
- *	Use the BSD names for these for compatibility
- */
-
-#define IGMP_DELAYING_MEMBER		0x01
-#define IGMP_IDLE_MEMBER		0x02
-#define IGMP_LAZY_MEMBER		0x03
-#define IGMP_SLEEPING_MEMBER		0x04
-#define IGMP_AWAKENING_MEMBER		0x05
-
-#define IGMP_MINLEN			8
-
-#define IGMP_MAX_HOST_REPORT_DELAY	10	/* max delay for response to */
-						/* query (in seconds)	*/
-
-#define IGMP_TIMER_SCALE		10	/* denotes that the igmphdr->timer field */
-						/* specifies time in 10th of seconds	 */
-
-#define IGMP_AGE_THRESHOLD		400	/* If this host don't hear any IGMP V1	*/
-						/* message in this period of time,	*/
-						/* revert to IGMP v2 router.		*/
-
-#define IGMP_ALL_HOSTS		htonl(0xE0000001L)
-#define IGMP_ALL_ROUTER 	htonl(0xE0000002L)
-#define IGMPV3_ALL_MCR	 	htonl(0xE0000016L)
-#define IGMP_LOCAL_GROUP	htonl(0xE0000000L)
-#define IGMP_LOCAL_GROUP_MASK	htonl(0xFFFFFF00L)
-
-/*
- * struct for keeping the multicast list in
- */
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
 #include <linux/timer.h>
 #include <linux/in.h>
+#include <uapi/linux/igmp.h>
 
 static inline struct igmphdr *igmp_hdr(const struct sk_buff *skb)
 {
@@ -241,4 +131,3 @@
 extern void ip_mc_rejoin_groups(struct in_device *in_dev);
 
 #endif
-#endif
diff --git a/include/linux/in.h b/include/linux/in.h
index e0337f1..31b4937 100644
--- a/include/linux/in.h
+++ b/include/linux/in.h
@@ -18,240 +18,9 @@
 #ifndef _LINUX_IN_H
 #define _LINUX_IN_H
 
-#include <linux/types.h>
-#include <linux/socket.h>
-
-/* Standard well-defined IP protocols.  */
-enum {
-  IPPROTO_IP = 0,		/* Dummy protocol for TCP		*/
-  IPPROTO_ICMP = 1,		/* Internet Control Message Protocol	*/
-  IPPROTO_IGMP = 2,		/* Internet Group Management Protocol	*/
-  IPPROTO_IPIP = 4,		/* IPIP tunnels (older KA9Q tunnels use 94) */
-  IPPROTO_TCP = 6,		/* Transmission Control Protocol	*/
-  IPPROTO_EGP = 8,		/* Exterior Gateway Protocol		*/
-  IPPROTO_PUP = 12,		/* PUP protocol				*/
-  IPPROTO_UDP = 17,		/* User Datagram Protocol		*/
-  IPPROTO_IDP = 22,		/* XNS IDP protocol			*/
-  IPPROTO_DCCP = 33,		/* Datagram Congestion Control Protocol */
-  IPPROTO_RSVP = 46,		/* RSVP protocol			*/
-  IPPROTO_GRE = 47,		/* Cisco GRE tunnels (rfc 1701,1702)	*/
-
-  IPPROTO_IPV6	 = 41,		/* IPv6-in-IPv4 tunnelling		*/
-
-  IPPROTO_ESP = 50,            /* Encapsulation Security Payload protocol */
-  IPPROTO_AH = 51,             /* Authentication Header protocol       */
-  IPPROTO_BEETPH = 94,	       /* IP option pseudo header for BEET */
-  IPPROTO_PIM    = 103,		/* Protocol Independent Multicast	*/
-
-  IPPROTO_COMP   = 108,                /* Compression Header protocol */
-  IPPROTO_SCTP   = 132,		/* Stream Control Transport Protocol	*/
-  IPPROTO_UDPLITE = 136,	/* UDP-Lite (RFC 3828)			*/
-
-  IPPROTO_RAW	 = 255,		/* Raw IP packets			*/
-  IPPROTO_MAX
-};
-
-
-/* Internet address. */
-struct in_addr {
-	__be32	s_addr;
-};
-
-#define IP_TOS		1
-#define IP_TTL		2
-#define IP_HDRINCL	3
-#define IP_OPTIONS	4
-#define IP_ROUTER_ALERT	5
-#define IP_RECVOPTS	6
-#define IP_RETOPTS	7
-#define IP_PKTINFO	8
-#define IP_PKTOPTIONS	9
-#define IP_MTU_DISCOVER	10
-#define IP_RECVERR	11
-#define IP_RECVTTL	12
-#define	IP_RECVTOS	13
-#define IP_MTU		14
-#define IP_FREEBIND	15
-#define IP_IPSEC_POLICY	16
-#define IP_XFRM_POLICY	17
-#define IP_PASSSEC	18
-#define IP_TRANSPARENT	19
-
-/* BSD compatibility */
-#define IP_RECVRETOPTS	IP_RETOPTS
-
-/* TProxy original addresses */
-#define IP_ORIGDSTADDR       20
-#define IP_RECVORIGDSTADDR   IP_ORIGDSTADDR
-
-#define IP_MINTTL       21
-#define IP_NODEFRAG     22
-
-/* IP_MTU_DISCOVER values */
-#define IP_PMTUDISC_DONT		0	/* Never send DF frames */
-#define IP_PMTUDISC_WANT		1	/* Use per route hints	*/
-#define IP_PMTUDISC_DO			2	/* Always DF		*/
-#define IP_PMTUDISC_PROBE		3       /* Ignore dst pmtu      */
-
-#define IP_MULTICAST_IF			32
-#define IP_MULTICAST_TTL 		33
-#define IP_MULTICAST_LOOP 		34
-#define IP_ADD_MEMBERSHIP		35
-#define IP_DROP_MEMBERSHIP		36
-#define IP_UNBLOCK_SOURCE		37
-#define IP_BLOCK_SOURCE			38
-#define IP_ADD_SOURCE_MEMBERSHIP	39
-#define IP_DROP_SOURCE_MEMBERSHIP	40
-#define IP_MSFILTER			41
-#define MCAST_JOIN_GROUP		42
-#define MCAST_BLOCK_SOURCE		43
-#define MCAST_UNBLOCK_SOURCE		44
-#define MCAST_LEAVE_GROUP		45
-#define MCAST_JOIN_SOURCE_GROUP		46
-#define MCAST_LEAVE_SOURCE_GROUP	47
-#define MCAST_MSFILTER			48
-#define IP_MULTICAST_ALL		49
-#define IP_UNICAST_IF			50
-
-#define MCAST_EXCLUDE	0
-#define MCAST_INCLUDE	1
-
-/* These need to appear somewhere around here */
-#define IP_DEFAULT_MULTICAST_TTL        1
-#define IP_DEFAULT_MULTICAST_LOOP       1
-
-/* Request struct for multicast socket ops */
-
-struct ip_mreq  {
-	struct in_addr imr_multiaddr;	/* IP multicast address of group */
-	struct in_addr imr_interface;	/* local IP address of interface */
-};
-
-struct ip_mreqn {
-	struct in_addr	imr_multiaddr;		/* IP multicast address of group */
-	struct in_addr	imr_address;		/* local IP address of interface */
-	int		imr_ifindex;		/* Interface index */
-};
-
-struct ip_mreq_source {
-	__be32		imr_multiaddr;
-	__be32		imr_interface;
-	__be32		imr_sourceaddr;
-};
-
-struct ip_msfilter {
-	__be32		imsf_multiaddr;
-	__be32		imsf_interface;
-	__u32		imsf_fmode;
-	__u32		imsf_numsrc;
-	__be32		imsf_slist[1];
-};
-
-#define IP_MSFILTER_SIZE(numsrc) \
-	(sizeof(struct ip_msfilter) - sizeof(__u32) \
-	+ (numsrc) * sizeof(__u32))
-
-struct group_req {
-	__u32				 gr_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gr_group;	/* group address */
-};
-
-struct group_source_req {
-	__u32				 gsr_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gsr_group;	/* group address */
-	struct __kernel_sockaddr_storage gsr_source;	/* source address */
-};
-
-struct group_filter {
-	__u32				 gf_interface;	/* interface index */
-	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
-	__u32				 gf_fmode;	/* filter mode */
-	__u32				 gf_numsrc;	/* number of sources */
-	struct __kernel_sockaddr_storage gf_slist[1];	/* interface index */
-};
-
-#define GROUP_FILTER_SIZE(numsrc) \
-	(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
-	+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
-
-struct in_pktinfo {
-	int		ipi_ifindex;
-	struct in_addr	ipi_spec_dst;
-	struct in_addr	ipi_addr;
-};
-
-/* Structure describing an Internet (IP) socket address. */
-#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
-struct sockaddr_in {
-  __kernel_sa_family_t	sin_family;	/* Address family		*/
-  __be16		sin_port;	/* Port number			*/
-  struct in_addr	sin_addr;	/* Internet address		*/
-
-  /* Pad to size of `struct sockaddr'. */
-  unsigned char		__pad[__SOCK_SIZE__ - sizeof(short int) -
-			sizeof(unsigned short int) - sizeof(struct in_addr)];
-};
-#define sin_zero	__pad		/* for BSD UNIX comp. -FvK	*/
-
-
-/*
- * Definitions of the bits in an Internet address integer.
- * On subnets, host and network parts are found according
- * to the subnet mask, not these masks.
- */
-#define	IN_CLASSA(a)		((((long int) (a)) & 0x80000000) == 0)
-#define	IN_CLASSA_NET		0xff000000
-#define	IN_CLASSA_NSHIFT	24
-#define	IN_CLASSA_HOST		(0xffffffff & ~IN_CLASSA_NET)
-#define	IN_CLASSA_MAX		128
-
-#define	IN_CLASSB(a)		((((long int) (a)) & 0xc0000000) == 0x80000000)
-#define	IN_CLASSB_NET		0xffff0000
-#define	IN_CLASSB_NSHIFT	16
-#define	IN_CLASSB_HOST		(0xffffffff & ~IN_CLASSB_NET)
-#define	IN_CLASSB_MAX		65536
-
-#define	IN_CLASSC(a)		((((long int) (a)) & 0xe0000000) == 0xc0000000)
-#define	IN_CLASSC_NET		0xffffff00
-#define	IN_CLASSC_NSHIFT	8
-#define	IN_CLASSC_HOST		(0xffffffff & ~IN_CLASSC_NET)
-
-#define	IN_CLASSD(a)		((((long int) (a)) & 0xf0000000) == 0xe0000000)
-#define	IN_MULTICAST(a)		IN_CLASSD(a)
-#define IN_MULTICAST_NET	0xF0000000
-
-#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
-#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
-
-/* Address to accept any incoming messages. */
-#define	INADDR_ANY		((unsigned long int) 0x00000000)
-
-/* Address to send to all hosts. */
-#define	INADDR_BROADCAST	((unsigned long int) 0xffffffff)
-
-/* Address indicating an error return. */
-#define	INADDR_NONE		((unsigned long int) 0xffffffff)
-
-/* Network number for local host loopback. */
-#define	IN_LOOPBACKNET		127
-
-/* Address to loopback in software to local host.  */
-#define	INADDR_LOOPBACK		0x7f000001	/* 127.0.0.1   */
-#define	IN_LOOPBACK(a)		((((long int) (a)) & 0xff000000) == 0x7f000000)
-
-/* Defines for Multicast INADDR */
-#define INADDR_UNSPEC_GROUP   	0xe0000000U	/* 224.0.0.0   */
-#define INADDR_ALLHOSTS_GROUP 	0xe0000001U	/* 224.0.0.1   */
-#define INADDR_ALLRTRS_GROUP    0xe0000002U	/* 224.0.0.2 */
-#define INADDR_MAX_LOCAL_GROUP  0xe00000ffU	/* 224.0.0.255 */
-
-
-/* <asm/byteorder.h> contains the htonl type stuff.. */
-#include <asm/byteorder.h> 
-
-#ifdef __KERNEL__
 
 #include <linux/errno.h>
+#include <uapi/linux/in.h>
 
 static inline int proto_ports_offset(int proto)
 {
@@ -332,6 +101,4 @@
 {
 	return (addr & htonl(0xfffe0000)) == htonl(0xc6120000);
 }
-#endif
-
 #endif	/* _LINUX_IN_H */
diff --git a/include/linux/in6.h b/include/linux/in6.h
index cba469b..9e2ae26 100644
--- a/include/linux/in6.h
+++ b/include/linux/in6.h
@@ -17,32 +17,11 @@
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IN6_H
 #define _LINUX_IN6_H
 
-#include <linux/types.h>
+#include <uapi/linux/in6.h>
 
-/*
- *	IPv6 address structure
- */
-
-struct in6_addr {
-	union {
-		__u8		u6_addr8[16];
-		__be16		u6_addr16[8];
-		__be32		u6_addr32[4];
-	} in6_u;
-#define s6_addr			in6_u.u6_addr8
-#define s6_addr16		in6_u.u6_addr16
-#define s6_addr32		in6_u.u6_addr32
-};
-
-/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
- * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
- * in network byte order, not in host byte order as are the IPv4 equivalents
- */
-#ifdef __KERNEL__
 extern const struct in6_addr in6addr_any;
 #define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } }
 extern const struct in6_addr in6addr_loopback;
@@ -54,238 +33,3 @@
 #define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \
 		{ { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } }
 #endif
-
-struct sockaddr_in6 {
-	unsigned short int	sin6_family;    /* AF_INET6 */
-	__be16			sin6_port;      /* Transport layer port # */
-	__be32			sin6_flowinfo;  /* IPv6 flow information */
-	struct in6_addr		sin6_addr;      /* IPv6 address */
-	__u32			sin6_scope_id;  /* scope id (new in RFC2553) */
-};
-
-struct ipv6_mreq {
-	/* IPv6 multicast address of group */
-	struct in6_addr ipv6mr_multiaddr;
-
-	/* local IPv6 address of interface */
-	int		ipv6mr_ifindex;
-};
-
-#define ipv6mr_acaddr	ipv6mr_multiaddr
-
-struct in6_flowlabel_req {
-	struct in6_addr	flr_dst;
-	__be32	flr_label;
-	__u8	flr_action;
-	__u8	flr_share;
-	__u16	flr_flags;
-	__u16 	flr_expires;
-	__u16	flr_linger;
-	__u32	__flr_pad;
-	/* Options in format of IPV6_PKTOPTIONS */
-};
-
-#define IPV6_FL_A_GET	0
-#define IPV6_FL_A_PUT	1
-#define IPV6_FL_A_RENEW	2
-
-#define IPV6_FL_F_CREATE	1
-#define IPV6_FL_F_EXCL		2
-
-#define IPV6_FL_S_NONE		0
-#define IPV6_FL_S_EXCL		1
-#define IPV6_FL_S_PROCESS	2
-#define IPV6_FL_S_USER		3
-#define IPV6_FL_S_ANY		255
-
-
-/*
- *	Bitmask constant declarations to help applications select out the 
- *	flow label and priority fields.
- *
- *	Note that this are in host byte order while the flowinfo field of
- *	sockaddr_in6 is in network byte order.
- */
-
-#define IPV6_FLOWINFO_FLOWLABEL		0x000fffff
-#define IPV6_FLOWINFO_PRIORITY		0x0ff00000
-
-/* These definitions are obsolete */
-#define IPV6_PRIORITY_UNCHARACTERIZED	0x0000
-#define IPV6_PRIORITY_FILLER		0x0100
-#define IPV6_PRIORITY_UNATTENDED	0x0200
-#define IPV6_PRIORITY_RESERVED1		0x0300
-#define IPV6_PRIORITY_BULK		0x0400
-#define IPV6_PRIORITY_RESERVED2		0x0500
-#define IPV6_PRIORITY_INTERACTIVE	0x0600
-#define IPV6_PRIORITY_CONTROL		0x0700
-#define IPV6_PRIORITY_8			0x0800
-#define IPV6_PRIORITY_9			0x0900
-#define IPV6_PRIORITY_10		0x0a00
-#define IPV6_PRIORITY_11		0x0b00
-#define IPV6_PRIORITY_12		0x0c00
-#define IPV6_PRIORITY_13		0x0d00
-#define IPV6_PRIORITY_14		0x0e00
-#define IPV6_PRIORITY_15		0x0f00
-
-/*
- *	IPV6 extension headers
- */
-#define IPPROTO_HOPOPTS		0	/* IPv6 hop-by-hop options	*/
-#define IPPROTO_ROUTING		43	/* IPv6 routing header		*/
-#define IPPROTO_FRAGMENT	44	/* IPv6 fragmentation header	*/
-#define IPPROTO_ICMPV6		58	/* ICMPv6			*/
-#define IPPROTO_NONE		59	/* IPv6 no next header		*/
-#define IPPROTO_DSTOPTS		60	/* IPv6 destination options	*/
-#define IPPROTO_MH		135	/* IPv6 mobility header		*/
-
-/*
- *	IPv6 TLV options.
- */
-#define IPV6_TLV_PAD1		0
-#define IPV6_TLV_PADN		1
-#define IPV6_TLV_ROUTERALERT	5
-#define IPV6_TLV_JUMBO		194
-#define IPV6_TLV_HAO		201	/* home address option */
-
-/*
- *	IPV6 socket options
- */
-
-#define IPV6_ADDRFORM		1
-#define IPV6_2292PKTINFO	2
-#define IPV6_2292HOPOPTS	3
-#define IPV6_2292DSTOPTS	4
-#define IPV6_2292RTHDR		5
-#define IPV6_2292PKTOPTIONS	6
-#define IPV6_CHECKSUM		7
-#define IPV6_2292HOPLIMIT	8
-#define IPV6_NEXTHOP		9
-#define IPV6_AUTHHDR		10	/* obsolete */
-#define IPV6_FLOWINFO		11
-
-#define IPV6_UNICAST_HOPS	16
-#define IPV6_MULTICAST_IF	17
-#define IPV6_MULTICAST_HOPS	18
-#define IPV6_MULTICAST_LOOP	19
-#define IPV6_ADD_MEMBERSHIP	20
-#define IPV6_DROP_MEMBERSHIP	21
-#define IPV6_ROUTER_ALERT	22
-#define IPV6_MTU_DISCOVER	23
-#define IPV6_MTU		24
-#define IPV6_RECVERR		25
-#define IPV6_V6ONLY		26
-#define IPV6_JOIN_ANYCAST	27
-#define IPV6_LEAVE_ANYCAST	28
-
-/* IPV6_MTU_DISCOVER values */
-#define IPV6_PMTUDISC_DONT		0
-#define IPV6_PMTUDISC_WANT		1
-#define IPV6_PMTUDISC_DO		2
-#define IPV6_PMTUDISC_PROBE		3
-
-/* Flowlabel */
-#define IPV6_FLOWLABEL_MGR	32
-#define IPV6_FLOWINFO_SEND	33
-
-#define IPV6_IPSEC_POLICY	34
-#define IPV6_XFRM_POLICY	35
-
-/*
- * Multicast:
- * Following socket options are shared between IPv4 and IPv6.
- *
- * MCAST_JOIN_GROUP		42
- * MCAST_BLOCK_SOURCE		43
- * MCAST_UNBLOCK_SOURCE		44
- * MCAST_LEAVE_GROUP		45
- * MCAST_JOIN_SOURCE_GROUP	46
- * MCAST_LEAVE_SOURCE_GROUP	47
- * MCAST_MSFILTER		48
- */
-
-/*
- * Advanced API (RFC3542) (1)
- *
- * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c.
- */
-
-#define IPV6_RECVPKTINFO	49
-#define IPV6_PKTINFO		50
-#define IPV6_RECVHOPLIMIT	51
-#define IPV6_HOPLIMIT		52
-#define IPV6_RECVHOPOPTS	53
-#define IPV6_HOPOPTS		54
-#define IPV6_RTHDRDSTOPTS	55
-#define IPV6_RECVRTHDR		56
-#define IPV6_RTHDR		57
-#define IPV6_RECVDSTOPTS	58
-#define IPV6_DSTOPTS		59
-#define IPV6_RECVPATHMTU	60
-#define IPV6_PATHMTU		61
-#define IPV6_DONTFRAG		62
-#if 0	/* not yet */
-#define IPV6_USE_MIN_MTU	63
-#endif
-
-/*
- * Netfilter (1)
- *
- * Following socket options are used in ip6_tables;
- * see include/linux/netfilter_ipv6/ip6_tables.h.
- *
- * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO		64
- * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES	65
- */
-
-/*
- * Advanced API (RFC3542) (2)
- */
-#define IPV6_RECVTCLASS		66
-#define IPV6_TCLASS		67
-
-/*
- * Netfilter (2)
- *
- * Following socket options are used in ip6_tables;
- * see include/linux/netfilter_ipv6/ip6_tables.h.
- *
- * IP6T_SO_GET_REVISION_MATCH	68
- * IP6T_SO_GET_REVISION_TARGET	69
- */
-
-/* RFC5014: Source address selection */
-#define IPV6_ADDR_PREFERENCES	72
-
-#define IPV6_PREFER_SRC_TMP		0x0001
-#define IPV6_PREFER_SRC_PUBLIC		0x0002
-#define IPV6_PREFER_SRC_PUBTMP_DEFAULT	0x0100
-#define IPV6_PREFER_SRC_COA		0x0004
-#define IPV6_PREFER_SRC_HOME		0x0400
-#define IPV6_PREFER_SRC_CGA		0x0008
-#define IPV6_PREFER_SRC_NONCGA		0x0800
-
-/* RFC5082: Generalized Ttl Security Mechanism */
-#define IPV6_MINHOPCOUNT		73
-
-#define IPV6_ORIGDSTADDR        74
-#define IPV6_RECVORIGDSTADDR    IPV6_ORIGDSTADDR
-#define IPV6_TRANSPARENT        75
-#define IPV6_UNICAST_IF         76
-
-/*
- * Multicast Routing:
- * see include/linux/mroute6.h.
- *
- * MRT6_INIT			200
- * MRT6_DONE			201
- * MRT6_ADD_MIF			202
- * MRT6_DEL_MIF			203
- * MRT6_ADD_MFC			204
- * MRT6_DEL_MFC			205
- * MRT6_VERSION			206
- * MRT6_ASSERT			207
- * MRT6_PIM			208
- * (reserved)			209
- */
-#endif
diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h
index e788c18..46da024 100644
--- a/include/linux/inet_diag.h
+++ b/include/linux/inet_diag.h
@@ -1,138 +1,8 @@
 #ifndef _INET_DIAG_H_
 #define _INET_DIAG_H_ 1
 
-#include <linux/types.h>
+#include <uapi/linux/inet_diag.h>
 
-/* Just some random number */
-#define TCPDIAG_GETSOCK 18
-#define DCCPDIAG_GETSOCK 19
-
-#define INET_DIAG_GETSOCK_MAX 24
-
-/* Socket identity */
-struct inet_diag_sockid {
-	__be16	idiag_sport;
-	__be16	idiag_dport;
-	__be32	idiag_src[4];
-	__be32	idiag_dst[4];
-	__u32	idiag_if;
-	__u32	idiag_cookie[2];
-#define INET_DIAG_NOCOOKIE (~0U)
-};
-
-/* Request structure */
-
-struct inet_diag_req {
-	__u8	idiag_family;		/* Family of addresses. */
-	__u8	idiag_src_len;
-	__u8	idiag_dst_len;
-	__u8	idiag_ext;		/* Query extended information */
-
-	struct inet_diag_sockid id;
-
-	__u32	idiag_states;		/* States to dump */
-	__u32	idiag_dbs;		/* Tables to dump (NI) */
-};
-
-struct inet_diag_req_v2 {
-	__u8	sdiag_family;
-	__u8	sdiag_protocol;
-	__u8	idiag_ext;
-	__u8	pad;
-	__u32	idiag_states;
-	struct inet_diag_sockid id;
-};
-
-enum {
-	INET_DIAG_REQ_NONE,
-	INET_DIAG_REQ_BYTECODE,
-};
-
-#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE
-
-/* Bytecode is sequence of 4 byte commands followed by variable arguments.
- * All the commands identified by "code" are conditional jumps forward:
- * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be
- * length of the command and its arguments.
- */
- 
-struct inet_diag_bc_op {
-	unsigned char	code;
-	unsigned char	yes;
-	unsigned short	no;
-};
-
-enum {
-	INET_DIAG_BC_NOP,
-	INET_DIAG_BC_JMP,
-	INET_DIAG_BC_S_GE,
-	INET_DIAG_BC_S_LE,
-	INET_DIAG_BC_D_GE,
-	INET_DIAG_BC_D_LE,
-	INET_DIAG_BC_AUTO,
-	INET_DIAG_BC_S_COND,
-	INET_DIAG_BC_D_COND,
-};
-
-struct inet_diag_hostcond {
-	__u8	family;
-	__u8	prefix_len;
-	int	port;
-	__be32	addr[0];
-};
-
-/* Base info structure. It contains socket identity (addrs/ports/cookie)
- * and, alas, the information shown by netstat. */
-struct inet_diag_msg {
-	__u8	idiag_family;
-	__u8	idiag_state;
-	__u8	idiag_timer;
-	__u8	idiag_retrans;
-
-	struct inet_diag_sockid id;
-
-	__u32	idiag_expires;
-	__u32	idiag_rqueue;
-	__u32	idiag_wqueue;
-	__u32	idiag_uid;
-	__u32	idiag_inode;
-};
-
-/* Extensions */
-
-enum {
-	INET_DIAG_NONE,
-	INET_DIAG_MEMINFO,
-	INET_DIAG_INFO,
-	INET_DIAG_VEGASINFO,
-	INET_DIAG_CONG,
-	INET_DIAG_TOS,
-	INET_DIAG_TCLASS,
-	INET_DIAG_SKMEMINFO,
-};
-
-#define INET_DIAG_MAX INET_DIAG_SKMEMINFO
-
-
-/* INET_DIAG_MEM */
-
-struct inet_diag_meminfo {
-	__u32	idiag_rmem;
-	__u32	idiag_wmem;
-	__u32	idiag_fmem;
-	__u32	idiag_tmem;
-};
-
-/* INET_DIAG_VEGASINFO */
-
-struct tcpvegas_info {
-	__u32	tcpv_enabled;
-	__u32	tcpv_rttcnt;
-	__u32	tcpv_rtt;
-	__u32	tcpv_minrtt;
-};
-
-#ifdef __KERNEL__
 struct sock;
 struct inet_hashinfo;
 struct nlattr;
@@ -173,6 +43,4 @@
 
 extern int  inet_diag_register(const struct inet_diag_handler *handler);
 extern void inet_diag_unregister(const struct inet_diag_handler *handler);
-#endif /* __KERNEL__ */
-
 #endif /* _INET_DIAG_H_ */
diff --git a/include/linux/inotify.h b/include/linux/inotify.h
index d33041e..23aede0 100644
--- a/include/linux/inotify.h
+++ b/include/linux/inotify.h
@@ -3,75 +3,12 @@
  *
  * Copyright (C) 2005 John McCutchan
  */
-
 #ifndef _LINUX_INOTIFY_H
 #define _LINUX_INOTIFY_H
 
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
-#include <linux/types.h>
-
-/*
- * struct inotify_event - structure read from the inotify device for each event
- *
- * When you are watching a directory, you will receive the filename for events
- * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd.
- */
-struct inotify_event {
-	__s32		wd;		/* watch descriptor */
-	__u32		mask;		/* watch mask */
-	__u32		cookie;		/* cookie to synchronize two events */
-	__u32		len;		/* length (including nulls) of name */
-	char		name[0];	/* stub for possible name */
-};
-
-/* the following are legal, implemented events that user-space can watch for */
-#define IN_ACCESS		0x00000001	/* File was accessed */
-#define IN_MODIFY		0x00000002	/* File was modified */
-#define IN_ATTRIB		0x00000004	/* Metadata changed */
-#define IN_CLOSE_WRITE		0x00000008	/* Writtable file was closed */
-#define IN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
-#define IN_OPEN			0x00000020	/* File was opened */
-#define IN_MOVED_FROM		0x00000040	/* File was moved from X */
-#define IN_MOVED_TO		0x00000080	/* File was moved to Y */
-#define IN_CREATE		0x00000100	/* Subfile was created */
-#define IN_DELETE		0x00000200	/* Subfile was deleted */
-#define IN_DELETE_SELF		0x00000400	/* Self was deleted */
-#define IN_MOVE_SELF		0x00000800	/* Self was moved */
-
-/* the following are legal events.  they are sent as needed to any watch */
-#define IN_UNMOUNT		0x00002000	/* Backing fs was unmounted */
-#define IN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
-#define IN_IGNORED		0x00008000	/* File was ignored */
-
-/* helper events */
-#define IN_CLOSE		(IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */
-#define IN_MOVE			(IN_MOVED_FROM | IN_MOVED_TO) /* moves */
-
-/* special flags */
-#define IN_ONLYDIR		0x01000000	/* only watch the path if it is a directory */
-#define IN_DONT_FOLLOW		0x02000000	/* don't follow a sym link */
-#define IN_EXCL_UNLINK		0x04000000	/* exclude events on unlinked objects */
-#define IN_MASK_ADD		0x20000000	/* add to the mask of an already existing watch */
-#define IN_ISDIR		0x40000000	/* event occurred against dir */
-#define IN_ONESHOT		0x80000000	/* only send event once */
-
-/*
- * All of the events - we build the list by hand so that we can add flags in
- * the future and not break backward compatibility.  Apps will get only the
- * events that they originally wanted.  Be sure to add new events here!
- */
-#define IN_ALL_EVENTS	(IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
-			 IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
-			 IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
-			 IN_MOVE_SELF)
-
-/* Flags for sys_inotify_init1.  */
-#define IN_CLOEXEC O_CLOEXEC
-#define IN_NONBLOCK O_NONBLOCK
-
-#ifdef __KERNEL__
 #include <linux/sysctl.h>
+#include <uapi/linux/inotify.h>
+
 extern struct ctl_table inotify_table[]; /* for sysctl */
 
 #define ALL_INOTIFY_BITS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
@@ -82,6 +19,4 @@
 			  IN_DONT_FOLLOW | IN_EXCL_UNLINK | IN_MASK_ADD | \
 			  IN_ISDIR | IN_ONESHOT)
 
-#endif
-
 #endif	/* _LINUX_INOTIFY_H */
diff --git a/include/linux/input.h b/include/linux/input.h
index ba48743..cab994b 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -1,6 +1,3 @@
-#ifndef _INPUT_H
-#define _INPUT_H
-
 /*
  * Copyright (c) 1999-2002 Vojtech Pavlik
  *
@@ -8,1156 +5,15 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
+#ifndef _INPUT_H
+#define _INPUT_H
 
-#ifdef __KERNEL__
 #include <linux/time.h>
 #include <linux/list.h>
-#else
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <linux/types.h>
-#endif
-
-/*
- * The event structure itself
- */
-
-struct input_event {
-	struct timeval time;
-	__u16 type;
-	__u16 code;
-	__s32 value;
-};
-
-/*
- * Protocol version.
- */
-
-#define EV_VERSION		0x010001
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-struct input_id {
-	__u16 bustype;
-	__u16 vendor;
-	__u16 product;
-	__u16 version;
-};
-
-/**
- * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
- * @value: latest reported value for the axis.
- * @minimum: specifies minimum value for the axis.
- * @maximum: specifies maximum value for the axis.
- * @fuzz: specifies fuzz value that is used to filter noise from
- *	the event stream.
- * @flat: values that are within this value will be discarded by
- *	joydev interface and reported as 0 instead.
- * @resolution: specifies resolution for the values reported for
- *	the axis.
- *
- * Note that input core does not clamp reported values to the
- * [minimum, maximum] limits, such task is left to userspace.
- *
- * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
- * units per millimeter (units/mm), resolution for rotational axes
- * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
- */
-struct input_absinfo {
-	__s32 value;
-	__s32 minimum;
-	__s32 maximum;
-	__s32 fuzz;
-	__s32 flat;
-	__s32 resolution;
-};
-
-/**
- * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
- * @scancode: scancode represented in machine-endian form.
- * @len: length of the scancode that resides in @scancode buffer.
- * @index: index in the keymap, may be used instead of scancode
- * @flags: allows to specify how kernel should handle the request. For
- *	example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
- *	should perform lookup in keymap by @index instead of @scancode
- * @keycode: key code assigned to this scancode
- *
- * The structure is used to retrieve and modify keymap data. Users have
- * option of performing lookup either by @scancode itself or by @index
- * in keymap entry. EVIOCGKEYCODE will also return scancode or index
- * (depending on which element was used to perform lookup).
- */
-struct input_keymap_entry {
-#define INPUT_KEYMAP_BY_INDEX	(1 << 0)
-	__u8  flags;
-	__u8  len;
-	__u16 index;
-	__u32 keycode;
-	__u8  scancode[32];
-};
-
-#define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
-#define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
-#define EVIOCGREP		_IOR('E', 0x03, unsigned int[2])	/* get repeat settings */
-#define EVIOCSREP		_IOW('E', 0x03, unsigned int[2])	/* set repeat settings */
-
-#define EVIOCGKEYCODE		_IOR('E', 0x04, unsigned int[2])        /* get keycode */
-#define EVIOCGKEYCODE_V2	_IOR('E', 0x04, struct input_keymap_entry)
-#define EVIOCSKEYCODE		_IOW('E', 0x04, unsigned int[2])        /* set keycode */
-#define EVIOCSKEYCODE_V2	_IOW('E', 0x04, struct input_keymap_entry)
-
-#define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
-#define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
-#define EVIOCGUNIQ(len)		_IOC(_IOC_READ, 'E', 0x08, len)		/* get unique identifier */
-#define EVIOCGPROP(len)		_IOC(_IOC_READ, 'E', 0x09, len)		/* get device properties */
-
-/**
- * EVIOCGMTSLOTS(len) - get MT slot values
- * @len: size of the data buffer in bytes
- *
- * The ioctl buffer argument should be binary equivalent to
- *
- * struct input_mt_request_layout {
- *	__u32 code;
- *	__s32 values[num_slots];
- * };
- *
- * where num_slots is the (arbitrary) number of MT slots to extract.
- *
- * The ioctl size argument (len) is the size of the buffer, which
- * should satisfy len = (num_slots + 1) * sizeof(__s32).  If len is
- * too small to fit all available slots, the first num_slots are
- * returned.
- *
- * Before the call, code is set to the wanted ABS_MT event type. On
- * return, values[] is filled with the slot values for the specified
- * ABS_MT code.
- *
- * If the request code is not an ABS_MT value, -EINVAL is returned.
- */
-#define EVIOCGMTSLOTS(len)	_IOC(_IOC_READ, 'E', 0x0a, len)
-
-#define EVIOCGKEY(len)		_IOC(_IOC_READ, 'E', 0x18, len)		/* get global key state */
-#define EVIOCGLED(len)		_IOC(_IOC_READ, 'E', 0x19, len)		/* get all LEDs */
-#define EVIOCGSND(len)		_IOC(_IOC_READ, 'E', 0x1a, len)		/* get all sounds status */
-#define EVIOCGSW(len)		_IOC(_IOC_READ, 'E', 0x1b, len)		/* get all switch states */
-
-#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + (ev), len)	/* get event bits */
-#define EVIOCGABS(abs)		_IOR('E', 0x40 + (abs), struct input_absinfo)	/* get abs value/limits */
-#define EVIOCSABS(abs)		_IOW('E', 0xc0 + (abs), struct input_absinfo)	/* set abs value/limits */
-
-#define EVIOCSFF		_IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect))	/* send a force effect to a force feedback device */
-#define EVIOCRMFF		_IOW('E', 0x81, int)			/* Erase a force effect */
-#define EVIOCGEFFECTS		_IOR('E', 0x84, int)			/* Report number of effects playable at the same time */
-
-#define EVIOCGRAB		_IOW('E', 0x90, int)			/* Grab/Release device */
-
-#define EVIOCSCLOCKID		_IOW('E', 0xa0, int)			/* Set clockid to be used for timestamps */
-
-/*
- * Device properties and quirks
- */
-
-#define INPUT_PROP_POINTER		0x00	/* needs a pointer */
-#define INPUT_PROP_DIRECT		0x01	/* direct input devices */
-#define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
-#define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
-
-#define INPUT_PROP_MAX			0x1f
-#define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)
-
-/*
- * Event types
- */
-
-#define EV_SYN			0x00
-#define EV_KEY			0x01
-#define EV_REL			0x02
-#define EV_ABS			0x03
-#define EV_MSC			0x04
-#define EV_SW			0x05
-#define EV_LED			0x11
-#define EV_SND			0x12
-#define EV_REP			0x14
-#define EV_FF			0x15
-#define EV_PWR			0x16
-#define EV_FF_STATUS		0x17
-#define EV_MAX			0x1f
-#define EV_CNT			(EV_MAX+1)
-
-/*
- * Synchronization events.
- */
-
-#define SYN_REPORT		0
-#define SYN_CONFIG		1
-#define SYN_MT_REPORT		2
-#define SYN_DROPPED		3
-
-/*
- * Keys and buttons
- *
- * Most of the keys/buttons are modeled after USB HUT 1.12
- * (see http://www.usb.org/developers/hidpage).
- * Abbreviations in the comments:
- * AC - Application Control
- * AL - Application Launch Button
- * SC - System Control
- */
-
-#define KEY_RESERVED		0
-#define KEY_ESC			1
-#define KEY_1			2
-#define KEY_2			3
-#define KEY_3			4
-#define KEY_4			5
-#define KEY_5			6
-#define KEY_6			7
-#define KEY_7			8
-#define KEY_8			9
-#define KEY_9			10
-#define KEY_0			11
-#define KEY_MINUS		12
-#define KEY_EQUAL		13
-#define KEY_BACKSPACE		14
-#define KEY_TAB			15
-#define KEY_Q			16
-#define KEY_W			17
-#define KEY_E			18
-#define KEY_R			19
-#define KEY_T			20
-#define KEY_Y			21
-#define KEY_U			22
-#define KEY_I			23
-#define KEY_O			24
-#define KEY_P			25
-#define KEY_LEFTBRACE		26
-#define KEY_RIGHTBRACE		27
-#define KEY_ENTER		28
-#define KEY_LEFTCTRL		29
-#define KEY_A			30
-#define KEY_S			31
-#define KEY_D			32
-#define KEY_F			33
-#define KEY_G			34
-#define KEY_H			35
-#define KEY_J			36
-#define KEY_K			37
-#define KEY_L			38
-#define KEY_SEMICOLON		39
-#define KEY_APOSTROPHE		40
-#define KEY_GRAVE		41
-#define KEY_LEFTSHIFT		42
-#define KEY_BACKSLASH		43
-#define KEY_Z			44
-#define KEY_X			45
-#define KEY_C			46
-#define KEY_V			47
-#define KEY_B			48
-#define KEY_N			49
-#define KEY_M			50
-#define KEY_COMMA		51
-#define KEY_DOT			52
-#define KEY_SLASH		53
-#define KEY_RIGHTSHIFT		54
-#define KEY_KPASTERISK		55
-#define KEY_LEFTALT		56
-#define KEY_SPACE		57
-#define KEY_CAPSLOCK		58
-#define KEY_F1			59
-#define KEY_F2			60
-#define KEY_F3			61
-#define KEY_F4			62
-#define KEY_F5			63
-#define KEY_F6			64
-#define KEY_F7			65
-#define KEY_F8			66
-#define KEY_F9			67
-#define KEY_F10			68
-#define KEY_NUMLOCK		69
-#define KEY_SCROLLLOCK		70
-#define KEY_KP7			71
-#define KEY_KP8			72
-#define KEY_KP9			73
-#define KEY_KPMINUS		74
-#define KEY_KP4			75
-#define KEY_KP5			76
-#define KEY_KP6			77
-#define KEY_KPPLUS		78
-#define KEY_KP1			79
-#define KEY_KP2			80
-#define KEY_KP3			81
-#define KEY_KP0			82
-#define KEY_KPDOT		83
-
-#define KEY_ZENKAKUHANKAKU	85
-#define KEY_102ND		86
-#define KEY_F11			87
-#define KEY_F12			88
-#define KEY_RO			89
-#define KEY_KATAKANA		90
-#define KEY_HIRAGANA		91
-#define KEY_HENKAN		92
-#define KEY_KATAKANAHIRAGANA	93
-#define KEY_MUHENKAN		94
-#define KEY_KPJPCOMMA		95
-#define KEY_KPENTER		96
-#define KEY_RIGHTCTRL		97
-#define KEY_KPSLASH		98
-#define KEY_SYSRQ		99
-#define KEY_RIGHTALT		100
-#define KEY_LINEFEED		101
-#define KEY_HOME		102
-#define KEY_UP			103
-#define KEY_PAGEUP		104
-#define KEY_LEFT		105
-#define KEY_RIGHT		106
-#define KEY_END			107
-#define KEY_DOWN		108
-#define KEY_PAGEDOWN		109
-#define KEY_INSERT		110
-#define KEY_DELETE		111
-#define KEY_MACRO		112
-#define KEY_MUTE		113
-#define KEY_VOLUMEDOWN		114
-#define KEY_VOLUMEUP		115
-#define KEY_POWER		116	/* SC System Power Down */
-#define KEY_KPEQUAL		117
-#define KEY_KPPLUSMINUS		118
-#define KEY_PAUSE		119
-#define KEY_SCALE		120	/* AL Compiz Scale (Expose) */
-
-#define KEY_KPCOMMA		121
-#define KEY_HANGEUL		122
-#define KEY_HANGUEL		KEY_HANGEUL
-#define KEY_HANJA		123
-#define KEY_YEN			124
-#define KEY_LEFTMETA		125
-#define KEY_RIGHTMETA		126
-#define KEY_COMPOSE		127
-
-#define KEY_STOP		128	/* AC Stop */
-#define KEY_AGAIN		129
-#define KEY_PROPS		130	/* AC Properties */
-#define KEY_UNDO		131	/* AC Undo */
-#define KEY_FRONT		132
-#define KEY_COPY		133	/* AC Copy */
-#define KEY_OPEN		134	/* AC Open */
-#define KEY_PASTE		135	/* AC Paste */
-#define KEY_FIND		136	/* AC Search */
-#define KEY_CUT			137	/* AC Cut */
-#define KEY_HELP		138	/* AL Integrated Help Center */
-#define KEY_MENU		139	/* Menu (show menu) */
-#define KEY_CALC		140	/* AL Calculator */
-#define KEY_SETUP		141
-#define KEY_SLEEP		142	/* SC System Sleep */
-#define KEY_WAKEUP		143	/* System Wake Up */
-#define KEY_FILE		144	/* AL Local Machine Browser */
-#define KEY_SENDFILE		145
-#define KEY_DELETEFILE		146
-#define KEY_XFER		147
-#define KEY_PROG1		148
-#define KEY_PROG2		149
-#define KEY_WWW			150	/* AL Internet Browser */
-#define KEY_MSDOS		151
-#define KEY_COFFEE		152	/* AL Terminal Lock/Screensaver */
-#define KEY_SCREENLOCK		KEY_COFFEE
-#define KEY_DIRECTION		153
-#define KEY_CYCLEWINDOWS	154
-#define KEY_MAIL		155
-#define KEY_BOOKMARKS		156	/* AC Bookmarks */
-#define KEY_COMPUTER		157
-#define KEY_BACK		158	/* AC Back */
-#define KEY_FORWARD		159	/* AC Forward */
-#define KEY_CLOSECD		160
-#define KEY_EJECTCD		161
-#define KEY_EJECTCLOSECD	162
-#define KEY_NEXTSONG		163
-#define KEY_PLAYPAUSE		164
-#define KEY_PREVIOUSSONG	165
-#define KEY_STOPCD		166
-#define KEY_RECORD		167
-#define KEY_REWIND		168
-#define KEY_PHONE		169	/* Media Select Telephone */
-#define KEY_ISO			170
-#define KEY_CONFIG		171	/* AL Consumer Control Configuration */
-#define KEY_HOMEPAGE		172	/* AC Home */
-#define KEY_REFRESH		173	/* AC Refresh */
-#define KEY_EXIT		174	/* AC Exit */
-#define KEY_MOVE		175
-#define KEY_EDIT		176
-#define KEY_SCROLLUP		177
-#define KEY_SCROLLDOWN		178
-#define KEY_KPLEFTPAREN		179
-#define KEY_KPRIGHTPAREN	180
-#define KEY_NEW			181	/* AC New */
-#define KEY_REDO		182	/* AC Redo/Repeat */
-
-#define KEY_F13			183
-#define KEY_F14			184
-#define KEY_F15			185
-#define KEY_F16			186
-#define KEY_F17			187
-#define KEY_F18			188
-#define KEY_F19			189
-#define KEY_F20			190
-#define KEY_F21			191
-#define KEY_F22			192
-#define KEY_F23			193
-#define KEY_F24			194
-
-#define KEY_PLAYCD		200
-#define KEY_PAUSECD		201
-#define KEY_PROG3		202
-#define KEY_PROG4		203
-#define KEY_DASHBOARD		204	/* AL Dashboard */
-#define KEY_SUSPEND		205
-#define KEY_CLOSE		206	/* AC Close */
-#define KEY_PLAY		207
-#define KEY_FASTFORWARD		208
-#define KEY_BASSBOOST		209
-#define KEY_PRINT		210	/* AC Print */
-#define KEY_HP			211
-#define KEY_CAMERA		212
-#define KEY_SOUND		213
-#define KEY_QUESTION		214
-#define KEY_EMAIL		215
-#define KEY_CHAT		216
-#define KEY_SEARCH		217
-#define KEY_CONNECT		218
-#define KEY_FINANCE		219	/* AL Checkbook/Finance */
-#define KEY_SPORT		220
-#define KEY_SHOP		221
-#define KEY_ALTERASE		222
-#define KEY_CANCEL		223	/* AC Cancel */
-#define KEY_BRIGHTNESSDOWN	224
-#define KEY_BRIGHTNESSUP	225
-#define KEY_MEDIA		226
-
-#define KEY_SWITCHVIDEOMODE	227	/* Cycle between available video
-					   outputs (Monitor/LCD/TV-out/etc) */
-#define KEY_KBDILLUMTOGGLE	228
-#define KEY_KBDILLUMDOWN	229
-#define KEY_KBDILLUMUP		230
-
-#define KEY_SEND		231	/* AC Send */
-#define KEY_REPLY		232	/* AC Reply */
-#define KEY_FORWARDMAIL		233	/* AC Forward Msg */
-#define KEY_SAVE		234	/* AC Save */
-#define KEY_DOCUMENTS		235
-
-#define KEY_BATTERY		236
-
-#define KEY_BLUETOOTH		237
-#define KEY_WLAN		238
-#define KEY_UWB			239
-
-#define KEY_UNKNOWN		240
-
-#define KEY_VIDEO_NEXT		241	/* drive next video source */
-#define KEY_VIDEO_PREV		242	/* drive previous video source */
-#define KEY_BRIGHTNESS_CYCLE	243	/* brightness up, after max is min */
-#define KEY_BRIGHTNESS_ZERO	244	/* brightness off, use ambient */
-#define KEY_DISPLAY_OFF		245	/* display device to off state */
-
-#define KEY_WIMAX		246
-#define KEY_RFKILL		247	/* Key that controls all radios */
-
-#define KEY_MICMUTE		248	/* Mute / unmute the microphone */
-
-/* Code 255 is reserved for special needs of AT keyboard driver */
-
-#define BTN_MISC		0x100
-#define BTN_0			0x100
-#define BTN_1			0x101
-#define BTN_2			0x102
-#define BTN_3			0x103
-#define BTN_4			0x104
-#define BTN_5			0x105
-#define BTN_6			0x106
-#define BTN_7			0x107
-#define BTN_8			0x108
-#define BTN_9			0x109
-
-#define BTN_MOUSE		0x110
-#define BTN_LEFT		0x110
-#define BTN_RIGHT		0x111
-#define BTN_MIDDLE		0x112
-#define BTN_SIDE		0x113
-#define BTN_EXTRA		0x114
-#define BTN_FORWARD		0x115
-#define BTN_BACK		0x116
-#define BTN_TASK		0x117
-
-#define BTN_JOYSTICK		0x120
-#define BTN_TRIGGER		0x120
-#define BTN_THUMB		0x121
-#define BTN_THUMB2		0x122
-#define BTN_TOP			0x123
-#define BTN_TOP2		0x124
-#define BTN_PINKIE		0x125
-#define BTN_BASE		0x126
-#define BTN_BASE2		0x127
-#define BTN_BASE3		0x128
-#define BTN_BASE4		0x129
-#define BTN_BASE5		0x12a
-#define BTN_BASE6		0x12b
-#define BTN_DEAD		0x12f
-
-#define BTN_GAMEPAD		0x130
-#define BTN_A			0x130
-#define BTN_B			0x131
-#define BTN_C			0x132
-#define BTN_X			0x133
-#define BTN_Y			0x134
-#define BTN_Z			0x135
-#define BTN_TL			0x136
-#define BTN_TR			0x137
-#define BTN_TL2			0x138
-#define BTN_TR2			0x139
-#define BTN_SELECT		0x13a
-#define BTN_START		0x13b
-#define BTN_MODE		0x13c
-#define BTN_THUMBL		0x13d
-#define BTN_THUMBR		0x13e
-
-#define BTN_DIGI		0x140
-#define BTN_TOOL_PEN		0x140
-#define BTN_TOOL_RUBBER		0x141
-#define BTN_TOOL_BRUSH		0x142
-#define BTN_TOOL_PENCIL		0x143
-#define BTN_TOOL_AIRBRUSH	0x144
-#define BTN_TOOL_FINGER		0x145
-#define BTN_TOOL_MOUSE		0x146
-#define BTN_TOOL_LENS		0x147
-#define BTN_TOOL_QUINTTAP	0x148	/* Five fingers on trackpad */
-#define BTN_TOUCH		0x14a
-#define BTN_STYLUS		0x14b
-#define BTN_STYLUS2		0x14c
-#define BTN_TOOL_DOUBLETAP	0x14d
-#define BTN_TOOL_TRIPLETAP	0x14e
-#define BTN_TOOL_QUADTAP	0x14f	/* Four fingers on trackpad */
-
-#define BTN_WHEEL		0x150
-#define BTN_GEAR_DOWN		0x150
-#define BTN_GEAR_UP		0x151
-
-#define KEY_OK			0x160
-#define KEY_SELECT		0x161
-#define KEY_GOTO		0x162
-#define KEY_CLEAR		0x163
-#define KEY_POWER2		0x164
-#define KEY_OPTION		0x165
-#define KEY_INFO		0x166	/* AL OEM Features/Tips/Tutorial */
-#define KEY_TIME		0x167
-#define KEY_VENDOR		0x168
-#define KEY_ARCHIVE		0x169
-#define KEY_PROGRAM		0x16a	/* Media Select Program Guide */
-#define KEY_CHANNEL		0x16b
-#define KEY_FAVORITES		0x16c
-#define KEY_EPG			0x16d
-#define KEY_PVR			0x16e	/* Media Select Home */
-#define KEY_MHP			0x16f
-#define KEY_LANGUAGE		0x170
-#define KEY_TITLE		0x171
-#define KEY_SUBTITLE		0x172
-#define KEY_ANGLE		0x173
-#define KEY_ZOOM		0x174
-#define KEY_MODE		0x175
-#define KEY_KEYBOARD		0x176
-#define KEY_SCREEN		0x177
-#define KEY_PC			0x178	/* Media Select Computer */
-#define KEY_TV			0x179	/* Media Select TV */
-#define KEY_TV2			0x17a	/* Media Select Cable */
-#define KEY_VCR			0x17b	/* Media Select VCR */
-#define KEY_VCR2		0x17c	/* VCR Plus */
-#define KEY_SAT			0x17d	/* Media Select Satellite */
-#define KEY_SAT2		0x17e
-#define KEY_CD			0x17f	/* Media Select CD */
-#define KEY_TAPE		0x180	/* Media Select Tape */
-#define KEY_RADIO		0x181
-#define KEY_TUNER		0x182	/* Media Select Tuner */
-#define KEY_PLAYER		0x183
-#define KEY_TEXT		0x184
-#define KEY_DVD			0x185	/* Media Select DVD */
-#define KEY_AUX			0x186
-#define KEY_MP3			0x187
-#define KEY_AUDIO		0x188	/* AL Audio Browser */
-#define KEY_VIDEO		0x189	/* AL Movie Browser */
-#define KEY_DIRECTORY		0x18a
-#define KEY_LIST		0x18b
-#define KEY_MEMO		0x18c	/* Media Select Messages */
-#define KEY_CALENDAR		0x18d
-#define KEY_RED			0x18e
-#define KEY_GREEN		0x18f
-#define KEY_YELLOW		0x190
-#define KEY_BLUE		0x191
-#define KEY_CHANNELUP		0x192	/* Channel Increment */
-#define KEY_CHANNELDOWN		0x193	/* Channel Decrement */
-#define KEY_FIRST		0x194
-#define KEY_LAST		0x195	/* Recall Last */
-#define KEY_AB			0x196
-#define KEY_NEXT		0x197
-#define KEY_RESTART		0x198
-#define KEY_SLOW		0x199
-#define KEY_SHUFFLE		0x19a
-#define KEY_BREAK		0x19b
-#define KEY_PREVIOUS		0x19c
-#define KEY_DIGITS		0x19d
-#define KEY_TEEN		0x19e
-#define KEY_TWEN		0x19f
-#define KEY_VIDEOPHONE		0x1a0	/* Media Select Video Phone */
-#define KEY_GAMES		0x1a1	/* Media Select Games */
-#define KEY_ZOOMIN		0x1a2	/* AC Zoom In */
-#define KEY_ZOOMOUT		0x1a3	/* AC Zoom Out */
-#define KEY_ZOOMRESET		0x1a4	/* AC Zoom */
-#define KEY_WORDPROCESSOR	0x1a5	/* AL Word Processor */
-#define KEY_EDITOR		0x1a6	/* AL Text Editor */
-#define KEY_SPREADSHEET		0x1a7	/* AL Spreadsheet */
-#define KEY_GRAPHICSEDITOR	0x1a8	/* AL Graphics Editor */
-#define KEY_PRESENTATION	0x1a9	/* AL Presentation App */
-#define KEY_DATABASE		0x1aa	/* AL Database App */
-#define KEY_NEWS		0x1ab	/* AL Newsreader */
-#define KEY_VOICEMAIL		0x1ac	/* AL Voicemail */
-#define KEY_ADDRESSBOOK		0x1ad	/* AL Contacts/Address Book */
-#define KEY_MESSENGER		0x1ae	/* AL Instant Messaging */
-#define KEY_DISPLAYTOGGLE	0x1af	/* Turn display (LCD) on and off */
-#define KEY_SPELLCHECK		0x1b0   /* AL Spell Check */
-#define KEY_LOGOFF		0x1b1   /* AL Logoff */
-
-#define KEY_DOLLAR		0x1b2
-#define KEY_EURO		0x1b3
-
-#define KEY_FRAMEBACK		0x1b4	/* Consumer - transport controls */
-#define KEY_FRAMEFORWARD	0x1b5
-#define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
-#define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
-#define KEY_10CHANNELSUP	0x1b8	/* 10 channels up (10+) */
-#define KEY_10CHANNELSDOWN	0x1b9	/* 10 channels down (10-) */
-#define KEY_IMAGES		0x1ba	/* AL Image Browser */
-
-#define KEY_DEL_EOL		0x1c0
-#define KEY_DEL_EOS		0x1c1
-#define KEY_INS_LINE		0x1c2
-#define KEY_DEL_LINE		0x1c3
-
-#define KEY_FN			0x1d0
-#define KEY_FN_ESC		0x1d1
-#define KEY_FN_F1		0x1d2
-#define KEY_FN_F2		0x1d3
-#define KEY_FN_F3		0x1d4
-#define KEY_FN_F4		0x1d5
-#define KEY_FN_F5		0x1d6
-#define KEY_FN_F6		0x1d7
-#define KEY_FN_F7		0x1d8
-#define KEY_FN_F8		0x1d9
-#define KEY_FN_F9		0x1da
-#define KEY_FN_F10		0x1db
-#define KEY_FN_F11		0x1dc
-#define KEY_FN_F12		0x1dd
-#define KEY_FN_1		0x1de
-#define KEY_FN_2		0x1df
-#define KEY_FN_D		0x1e0
-#define KEY_FN_E		0x1e1
-#define KEY_FN_F		0x1e2
-#define KEY_FN_S		0x1e3
-#define KEY_FN_B		0x1e4
-
-#define KEY_BRL_DOT1		0x1f1
-#define KEY_BRL_DOT2		0x1f2
-#define KEY_BRL_DOT3		0x1f3
-#define KEY_BRL_DOT4		0x1f4
-#define KEY_BRL_DOT5		0x1f5
-#define KEY_BRL_DOT6		0x1f6
-#define KEY_BRL_DOT7		0x1f7
-#define KEY_BRL_DOT8		0x1f8
-#define KEY_BRL_DOT9		0x1f9
-#define KEY_BRL_DOT10		0x1fa
-
-#define KEY_NUMERIC_0		0x200	/* used by phones, remote controls, */
-#define KEY_NUMERIC_1		0x201	/* and other keypads */
-#define KEY_NUMERIC_2		0x202
-#define KEY_NUMERIC_3		0x203
-#define KEY_NUMERIC_4		0x204
-#define KEY_NUMERIC_5		0x205
-#define KEY_NUMERIC_6		0x206
-#define KEY_NUMERIC_7		0x207
-#define KEY_NUMERIC_8		0x208
-#define KEY_NUMERIC_9		0x209
-#define KEY_NUMERIC_STAR	0x20a
-#define KEY_NUMERIC_POUND	0x20b
-
-#define KEY_CAMERA_FOCUS	0x210
-#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
-
-#define KEY_TOUCHPAD_TOGGLE	0x212	/* Request switch touchpad on or off */
-#define KEY_TOUCHPAD_ON		0x213
-#define KEY_TOUCHPAD_OFF	0x214
-
-#define KEY_CAMERA_ZOOMIN	0x215
-#define KEY_CAMERA_ZOOMOUT	0x216
-#define KEY_CAMERA_UP		0x217
-#define KEY_CAMERA_DOWN		0x218
-#define KEY_CAMERA_LEFT		0x219
-#define KEY_CAMERA_RIGHT	0x21a
-
-#define BTN_TRIGGER_HAPPY		0x2c0
-#define BTN_TRIGGER_HAPPY1		0x2c0
-#define BTN_TRIGGER_HAPPY2		0x2c1
-#define BTN_TRIGGER_HAPPY3		0x2c2
-#define BTN_TRIGGER_HAPPY4		0x2c3
-#define BTN_TRIGGER_HAPPY5		0x2c4
-#define BTN_TRIGGER_HAPPY6		0x2c5
-#define BTN_TRIGGER_HAPPY7		0x2c6
-#define BTN_TRIGGER_HAPPY8		0x2c7
-#define BTN_TRIGGER_HAPPY9		0x2c8
-#define BTN_TRIGGER_HAPPY10		0x2c9
-#define BTN_TRIGGER_HAPPY11		0x2ca
-#define BTN_TRIGGER_HAPPY12		0x2cb
-#define BTN_TRIGGER_HAPPY13		0x2cc
-#define BTN_TRIGGER_HAPPY14		0x2cd
-#define BTN_TRIGGER_HAPPY15		0x2ce
-#define BTN_TRIGGER_HAPPY16		0x2cf
-#define BTN_TRIGGER_HAPPY17		0x2d0
-#define BTN_TRIGGER_HAPPY18		0x2d1
-#define BTN_TRIGGER_HAPPY19		0x2d2
-#define BTN_TRIGGER_HAPPY20		0x2d3
-#define BTN_TRIGGER_HAPPY21		0x2d4
-#define BTN_TRIGGER_HAPPY22		0x2d5
-#define BTN_TRIGGER_HAPPY23		0x2d6
-#define BTN_TRIGGER_HAPPY24		0x2d7
-#define BTN_TRIGGER_HAPPY25		0x2d8
-#define BTN_TRIGGER_HAPPY26		0x2d9
-#define BTN_TRIGGER_HAPPY27		0x2da
-#define BTN_TRIGGER_HAPPY28		0x2db
-#define BTN_TRIGGER_HAPPY29		0x2dc
-#define BTN_TRIGGER_HAPPY30		0x2dd
-#define BTN_TRIGGER_HAPPY31		0x2de
-#define BTN_TRIGGER_HAPPY32		0x2df
-#define BTN_TRIGGER_HAPPY33		0x2e0
-#define BTN_TRIGGER_HAPPY34		0x2e1
-#define BTN_TRIGGER_HAPPY35		0x2e2
-#define BTN_TRIGGER_HAPPY36		0x2e3
-#define BTN_TRIGGER_HAPPY37		0x2e4
-#define BTN_TRIGGER_HAPPY38		0x2e5
-#define BTN_TRIGGER_HAPPY39		0x2e6
-#define BTN_TRIGGER_HAPPY40		0x2e7
-
-/* We avoid low common keys in module aliases so they don't get huge. */
-#define KEY_MIN_INTERESTING	KEY_MUTE
-#define KEY_MAX			0x2ff
-#define KEY_CNT			(KEY_MAX+1)
-
-/*
- * Relative axes
- */
-
-#define REL_X			0x00
-#define REL_Y			0x01
-#define REL_Z			0x02
-#define REL_RX			0x03
-#define REL_RY			0x04
-#define REL_RZ			0x05
-#define REL_HWHEEL		0x06
-#define REL_DIAL		0x07
-#define REL_WHEEL		0x08
-#define REL_MISC		0x09
-#define REL_MAX			0x0f
-#define REL_CNT			(REL_MAX+1)
-
-/*
- * Absolute axes
- */
-
-#define ABS_X			0x00
-#define ABS_Y			0x01
-#define ABS_Z			0x02
-#define ABS_RX			0x03
-#define ABS_RY			0x04
-#define ABS_RZ			0x05
-#define ABS_THROTTLE		0x06
-#define ABS_RUDDER		0x07
-#define ABS_WHEEL		0x08
-#define ABS_GAS			0x09
-#define ABS_BRAKE		0x0a
-#define ABS_HAT0X		0x10
-#define ABS_HAT0Y		0x11
-#define ABS_HAT1X		0x12
-#define ABS_HAT1Y		0x13
-#define ABS_HAT2X		0x14
-#define ABS_HAT2Y		0x15
-#define ABS_HAT3X		0x16
-#define ABS_HAT3Y		0x17
-#define ABS_PRESSURE		0x18
-#define ABS_DISTANCE		0x19
-#define ABS_TILT_X		0x1a
-#define ABS_TILT_Y		0x1b
-#define ABS_TOOL_WIDTH		0x1c
-
-#define ABS_VOLUME		0x20
-
-#define ABS_MISC		0x28
-
-#define ABS_MT_SLOT		0x2f	/* MT slot being modified */
-#define ABS_MT_TOUCH_MAJOR	0x30	/* Major axis of touching ellipse */
-#define ABS_MT_TOUCH_MINOR	0x31	/* Minor axis (omit if circular) */
-#define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
-#define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
-#define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
-#define ABS_MT_POSITION_X	0x35	/* Center X touch position */
-#define ABS_MT_POSITION_Y	0x36	/* Center Y touch position */
-#define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
-#define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
-#define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
-#define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
-#define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
-#define ABS_MT_TOOL_X		0x3c	/* Center X tool position */
-#define ABS_MT_TOOL_Y		0x3d	/* Center Y tool position */
-
-#ifdef __KERNEL__
+#include <uapi/linux/input.h>
 /* Implementation details, userspace should not care about these */
 #define ABS_MT_FIRST		ABS_MT_TOUCH_MAJOR
 #define ABS_MT_LAST		ABS_MT_TOOL_Y
-#endif
-
-#define ABS_MAX			0x3f
-#define ABS_CNT			(ABS_MAX+1)
-
-/*
- * Switch events
- */
-
-#define SW_LID			0x00  /* set = lid shut */
-#define SW_TABLET_MODE		0x01  /* set = tablet mode */
-#define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
-#define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
-					 set = radio enabled */
-#define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
-#define SW_MICROPHONE_INSERT	0x04  /* set = inserted */
-#define SW_DOCK			0x05  /* set = plugged into dock */
-#define SW_LINEOUT_INSERT	0x06  /* set = inserted */
-#define SW_JACK_PHYSICAL_INSERT 0x07  /* set = mechanical switch set */
-#define SW_VIDEOOUT_INSERT	0x08  /* set = inserted */
-#define SW_CAMERA_LENS_COVER	0x09  /* set = lens covered */
-#define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
-#define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
-#define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
-#define SW_LINEIN_INSERT	0x0d  /* set = inserted */
-#define SW_MAX			0x0f
-#define SW_CNT			(SW_MAX+1)
-
-/*
- * Misc events
- */
-
-#define MSC_SERIAL		0x00
-#define MSC_PULSELED		0x01
-#define MSC_GESTURE		0x02
-#define MSC_RAW			0x03
-#define MSC_SCAN		0x04
-#define MSC_MAX			0x07
-#define MSC_CNT			(MSC_MAX+1)
-
-/*
- * LEDs
- */
-
-#define LED_NUML		0x00
-#define LED_CAPSL		0x01
-#define LED_SCROLLL		0x02
-#define LED_COMPOSE		0x03
-#define LED_KANA		0x04
-#define LED_SLEEP		0x05
-#define LED_SUSPEND		0x06
-#define LED_MUTE		0x07
-#define LED_MISC		0x08
-#define LED_MAIL		0x09
-#define LED_CHARGING		0x0a
-#define LED_MAX			0x0f
-#define LED_CNT			(LED_MAX+1)
-
-/*
- * Autorepeat values
- */
-
-#define REP_DELAY		0x00
-#define REP_PERIOD		0x01
-#define REP_MAX			0x01
-#define REP_CNT			(REP_MAX+1)
-
-/*
- * Sounds
- */
-
-#define SND_CLICK		0x00
-#define SND_BELL		0x01
-#define SND_TONE		0x02
-#define SND_MAX			0x07
-#define SND_CNT			(SND_MAX+1)
-
-/*
- * IDs.
- */
-
-#define ID_BUS			0
-#define ID_VENDOR		1
-#define ID_PRODUCT		2
-#define ID_VERSION		3
-
-#define BUS_PCI			0x01
-#define BUS_ISAPNP		0x02
-#define BUS_USB			0x03
-#define BUS_HIL			0x04
-#define BUS_BLUETOOTH		0x05
-#define BUS_VIRTUAL		0x06
-
-#define BUS_ISA			0x10
-#define BUS_I8042		0x11
-#define BUS_XTKBD		0x12
-#define BUS_RS232		0x13
-#define BUS_GAMEPORT		0x14
-#define BUS_PARPORT		0x15
-#define BUS_AMIGA		0x16
-#define BUS_ADB			0x17
-#define BUS_I2C			0x18
-#define BUS_HOST		0x19
-#define BUS_GSC			0x1A
-#define BUS_ATARI		0x1B
-#define BUS_SPI			0x1C
-
-/*
- * MT_TOOL types
- */
-#define MT_TOOL_FINGER		0
-#define MT_TOOL_PEN		1
-#define MT_TOOL_MAX		1
-
-/*
- * Values describing the status of a force-feedback effect
- */
-#define FF_STATUS_STOPPED	0x00
-#define FF_STATUS_PLAYING	0x01
-#define FF_STATUS_MAX		0x01
-
-/*
- * Structures used in ioctls to upload effects to a device
- * They are pieces of a bigger structure (called ff_effect)
- */
-
-/*
- * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
- * should not be used and have unspecified results.
- */
-
-/**
- * struct ff_replay - defines scheduling of the force-feedback effect
- * @length: duration of the effect
- * @delay: delay before effect should start playing
- */
-struct ff_replay {
-	__u16 length;
-	__u16 delay;
-};
-
-/**
- * struct ff_trigger - defines what triggers the force-feedback effect
- * @button: number of the button triggering the effect
- * @interval: controls how soon the effect can be re-triggered
- */
-struct ff_trigger {
-	__u16 button;
-	__u16 interval;
-};
-
-/**
- * struct ff_envelope - generic force-feedback effect envelope
- * @attack_length: duration of the attack (ms)
- * @attack_level: level at the beginning of the attack
- * @fade_length: duration of fade (ms)
- * @fade_level: level at the end of fade
- *
- * The @attack_level and @fade_level are absolute values; when applying
- * envelope force-feedback core will convert to positive/negative
- * value based on polarity of the default level of the effect.
- * Valid range for the attack and fade levels is 0x0000 - 0x7fff
- */
-struct ff_envelope {
-	__u16 attack_length;
-	__u16 attack_level;
-	__u16 fade_length;
-	__u16 fade_level;
-};
-
-/**
- * struct ff_constant_effect - defines parameters of a constant force-feedback effect
- * @level: strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_constant_effect {
-	__s16 level;
-	struct ff_envelope envelope;
-};
-
-/**
- * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
- * @start_level: beginning strength of the effect; may be negative
- * @end_level: final strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_ramp_effect {
-	__s16 start_level;
-	__s16 end_level;
-	struct ff_envelope envelope;
-};
-
-/**
- * struct ff_condition_effect - defines a spring or friction force-feedback effect
- * @right_saturation: maximum level when joystick moved all way to the right
- * @left_saturation: same for the left side
- * @right_coeff: controls how fast the force grows when the joystick moves
- *	to the right
- * @left_coeff: same for the left side
- * @deadband: size of the dead zone, where no force is produced
- * @center: position of the dead zone
- */
-struct ff_condition_effect {
-	__u16 right_saturation;
-	__u16 left_saturation;
-
-	__s16 right_coeff;
-	__s16 left_coeff;
-
-	__u16 deadband;
-	__s16 center;
-};
-
-/**
- * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
- * @waveform: kind of the effect (wave)
- * @period: period of the wave (ms)
- * @magnitude: peak value
- * @offset: mean value of the wave (roughly)
- * @phase: 'horizontal' shift
- * @envelope: envelope data
- * @custom_len: number of samples (FF_CUSTOM only)
- * @custom_data: buffer of samples (FF_CUSTOM only)
- *
- * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
- * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
- * for the time being as no driver supports it yet.
- *
- * Note: the data pointed by custom_data is copied by the driver.
- * You can therefore dispose of the memory after the upload/update.
- */
-struct ff_periodic_effect {
-	__u16 waveform;
-	__u16 period;
-	__s16 magnitude;
-	__s16 offset;
-	__u16 phase;
-
-	struct ff_envelope envelope;
-
-	__u32 custom_len;
-	__s16 __user *custom_data;
-};
-
-/**
- * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
- * @strong_magnitude: magnitude of the heavy motor
- * @weak_magnitude: magnitude of the light one
- *
- * Some rumble pads have two motors of different weight. Strong_magnitude
- * represents the magnitude of the vibration generated by the heavy one.
- */
-struct ff_rumble_effect {
-	__u16 strong_magnitude;
-	__u16 weak_magnitude;
-};
-
-/**
- * struct ff_effect - defines force feedback effect
- * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
- *	FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
- * @id: an unique id assigned to an effect
- * @direction: direction of the effect
- * @trigger: trigger conditions (struct ff_trigger)
- * @replay: scheduling of the effect (struct ff_replay)
- * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
- *	ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
- *	defining effect parameters
- *
- * This structure is sent through ioctl from the application to the driver.
- * To create a new effect application should set its @id to -1; the kernel
- * will return assigned @id which can later be used to update or delete
- * this effect.
- *
- * Direction of the effect is encoded as follows:
- *	0 deg -> 0x0000 (down)
- *	90 deg -> 0x4000 (left)
- *	180 deg -> 0x8000 (up)
- *	270 deg -> 0xC000 (right)
- */
-struct ff_effect {
-	__u16 type;
-	__s16 id;
-	__u16 direction;
-	struct ff_trigger trigger;
-	struct ff_replay replay;
-
-	union {
-		struct ff_constant_effect constant;
-		struct ff_ramp_effect ramp;
-		struct ff_periodic_effect periodic;
-		struct ff_condition_effect condition[2]; /* One for each axis */
-		struct ff_rumble_effect rumble;
-	} u;
-};
-
-/*
- * Force feedback effect types
- */
-
-#define FF_RUMBLE	0x50
-#define FF_PERIODIC	0x51
-#define FF_CONSTANT	0x52
-#define FF_SPRING	0x53
-#define FF_FRICTION	0x54
-#define FF_DAMPER	0x55
-#define FF_INERTIA	0x56
-#define FF_RAMP		0x57
-
-#define FF_EFFECT_MIN	FF_RUMBLE
-#define FF_EFFECT_MAX	FF_RAMP
-
-/*
- * Force feedback periodic effect types
- */
-
-#define FF_SQUARE	0x58
-#define FF_TRIANGLE	0x59
-#define FF_SINE		0x5a
-#define FF_SAW_UP	0x5b
-#define FF_SAW_DOWN	0x5c
-#define FF_CUSTOM	0x5d
-
-#define FF_WAVEFORM_MIN	FF_SQUARE
-#define FF_WAVEFORM_MAX	FF_CUSTOM
-
-/*
- * Set ff device properties
- */
-
-#define FF_GAIN		0x60
-#define FF_AUTOCENTER	0x61
-
-#define FF_MAX		0x7f
-#define FF_CNT		(FF_MAX+1)
-
-#ifdef __KERNEL__
 
 /*
  * In-kernel definitions.
@@ -1396,8 +252,8 @@
  * @start: starts handler for given handle. This function is called by
  *	input core right after connect() method and also when a process
  *	that "grabbed" a device releases it
- * @fops: file operations this driver implements
- * @minor: beginning of range of 32 minors for devices this driver
+ * @legacy_minors: set to %true by drivers using legacy minor ranges
+ * @minor: beginning of range of 32 legacy minors for devices this driver
  *	can provide
  * @name: name of the handler, to be shown in /proc/bus/input/handlers
  * @id_table: pointer to a table of input_device_ids this driver can
@@ -1431,7 +287,7 @@
 	void (*disconnect)(struct input_handle *handle);
 	void (*start)(struct input_handle *handle);
 
-	const struct file_operations *fops;
+	bool legacy_minors;
 	int minor;
 	const char *name;
 
@@ -1499,6 +355,10 @@
 int __must_check input_register_handler(struct input_handler *);
 void input_unregister_handler(struct input_handler *);
 
+int __must_check input_get_new_minor(int legacy_base, unsigned int legacy_num,
+				     bool allow_dynamic);
+void input_free_minor(unsigned int minor);
+
 int input_handler_for_each_handle(struct input_handler *, void *data,
 				  int (*fn)(struct input_handle *, void *));
 
@@ -1664,4 +524,3 @@
 		int (*play_effect)(struct input_dev *, void *, struct ff_effect *));
 
 #endif
-#endif
diff --git a/include/linux/ip.h b/include/linux/ip.h
index bd0a2a8..58b82a2 100644
--- a/include/linux/ip.h
+++ b/include/linux/ip.h
@@ -16,96 +16,9 @@
  */
 #ifndef _LINUX_IP_H
 #define _LINUX_IP_H
-#include <linux/types.h>
-#include <asm/byteorder.h>
 
-#define IPTOS_TOS_MASK		0x1E
-#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
-#define	IPTOS_LOWDELAY		0x10
-#define	IPTOS_THROUGHPUT	0x08
-#define	IPTOS_RELIABILITY	0x04
-#define	IPTOS_MINCOST		0x02
-
-#define IPTOS_PREC_MASK		0xE0
-#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
-#define IPTOS_PREC_NETCONTROL           0xe0
-#define IPTOS_PREC_INTERNETCONTROL      0xc0
-#define IPTOS_PREC_CRITIC_ECP           0xa0
-#define IPTOS_PREC_FLASHOVERRIDE        0x80
-#define IPTOS_PREC_FLASH                0x60
-#define IPTOS_PREC_IMMEDIATE            0x40
-#define IPTOS_PREC_PRIORITY             0x20
-#define IPTOS_PREC_ROUTINE              0x00
-
-
-/* IP options */
-#define IPOPT_COPY		0x80
-#define IPOPT_CLASS_MASK	0x60
-#define IPOPT_NUMBER_MASK	0x1f
-
-#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
-#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
-#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
-
-#define	IPOPT_CONTROL		0x00
-#define	IPOPT_RESERVED1		0x20
-#define	IPOPT_MEASUREMENT	0x40
-#define	IPOPT_RESERVED2		0x60
-
-#define IPOPT_END	(0 |IPOPT_CONTROL)
-#define IPOPT_NOOP	(1 |IPOPT_CONTROL)
-#define IPOPT_SEC	(2 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_LSRR	(3 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_TIMESTAMP	(4 |IPOPT_MEASUREMENT)
-#define IPOPT_CIPSO	(6 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_RR	(7 |IPOPT_CONTROL)
-#define IPOPT_SID	(8 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_SSRR	(9 |IPOPT_CONTROL|IPOPT_COPY)
-#define IPOPT_RA	(20|IPOPT_CONTROL|IPOPT_COPY)
-
-#define IPVERSION	4
-#define MAXTTL		255
-#define IPDEFTTL	64
-
-#define IPOPT_OPTVAL 0
-#define IPOPT_OLEN   1
-#define IPOPT_OFFSET 2
-#define IPOPT_MINOFF 4
-#define MAX_IPOPTLEN 40
-#define IPOPT_NOP IPOPT_NOOP
-#define IPOPT_EOL IPOPT_END
-#define IPOPT_TS  IPOPT_TIMESTAMP
-
-#define	IPOPT_TS_TSONLY		0		/* timestamps only */
-#define	IPOPT_TS_TSANDADDR	1		/* timestamps and addresses */
-#define	IPOPT_TS_PRESPEC	3		/* specified modules only */
-
-#define IPV4_BEET_PHMAXLEN 8
-
-struct iphdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	ihl:4,
-		version:4;
-#elif defined (__BIG_ENDIAN_BITFIELD)
-	__u8	version:4,
-  		ihl:4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8	tos;
-	__be16	tot_len;
-	__be16	id;
-	__be16	frag_off;
-	__u8	ttl;
-	__u8	protocol;
-	__sum16	check;
-	__be32	saddr;
-	__be32	daddr;
-	/*The options start here. */
-};
-
-#ifdef __KERNEL__
 #include <linux/skbuff.h>
+#include <uapi/linux/ip.h>
 
 static inline struct iphdr *ip_hdr(const struct sk_buff *skb)
 {
@@ -116,34 +29,4 @@
 {
 	return (struct iphdr *)skb_transport_header(skb);
 }
-#endif
-
-struct ip_auth_hdr {
-	__u8  nexthdr;
-	__u8  hdrlen;		/* This one is measured in 32 bit units! */
-	__be16 reserved;
-	__be32 spi;
-	__be32 seq_no;		/* Sequence number */
-	__u8  auth_data[0];	/* Variable len but >=4. Mind the 64 bit alignment! */
-};
-
-struct ip_esp_hdr {
-	__be32 spi;
-	__be32 seq_no;		/* Sequence number */
-	__u8  enc_data[0];	/* Variable len but >=8. Mind the 64 bit alignment! */
-};
-
-struct ip_comp_hdr {
-	__u8 nexthdr;
-	__u8 flags;
-	__be16 cpi;
-};
-
-struct ip_beet_phdr {
-	__u8 nexthdr;
-	__u8 hdrlen;
-	__u8 padlen;
-	__u8 reserved;
-};
-
 #endif	/* _LINUX_IP_H */
diff --git a/include/linux/ipc.h b/include/linux/ipc.h
index ca833fd..8d861b2 100644
--- a/include/linux/ipc.h
+++ b/include/linux/ipc.h
@@ -1,85 +1,9 @@
 #ifndef _LINUX_IPC_H
 #define _LINUX_IPC_H
 
-#include <linux/types.h>
-
-#define IPC_PRIVATE ((__kernel_key_t) 0)  
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct ipc_perm
-{
-	__kernel_key_t	key;
-	__kernel_uid_t	uid;
-	__kernel_gid_t	gid;
-	__kernel_uid_t	cuid;
-	__kernel_gid_t	cgid;
-	__kernel_mode_t	mode; 
-	unsigned short	seq;
-};
-
-/* Include the definition of ipc64_perm */
-#include <asm/ipcbuf.h>
-
-/* resource get request flags */
-#define IPC_CREAT  00001000   /* create if key is nonexistent */
-#define IPC_EXCL   00002000   /* fail if key exists */
-#define IPC_NOWAIT 00004000   /* return error on wait */
-
-/* these fields are used by the DIPC package so the kernel as standard
-   should avoid using them if possible */
-   
-#define IPC_DIPC 00010000  /* make it distributed */
-#define IPC_OWN  00020000  /* this machine is the DIPC owner */
-
-/* 
- * Control commands used with semctl, msgctl and shmctl 
- * see also specific commands in sem.h, msg.h and shm.h
- */
-#define IPC_RMID 0     /* remove resource */
-#define IPC_SET  1     /* set ipc_perm options */
-#define IPC_STAT 2     /* get ipc_perm options */
-#define IPC_INFO 3     /* see ipcs */
-
-/*
- * Version flags for semctl, msgctl, and shmctl commands
- * These are passed as bitflags or-ed with the actual command
- */
-#define IPC_OLD 0	/* Old version (no 32-bit UID support on many
-			   architectures) */
-#define IPC_64  0x0100  /* New version (support 32-bit UIDs, bigger
-			   message sizes, etc. */
-
-/*
- * These are used to wrap system calls.
- *
- * See architecture code for ugly details..
- */
-struct ipc_kludge {
-	struct msgbuf __user *msgp;
-	long msgtyp;
-};
-
-#define SEMOP		 1
-#define SEMGET		 2
-#define SEMCTL		 3
-#define SEMTIMEDOP	 4
-#define MSGSND		11
-#define MSGRCV		12
-#define MSGGET		13
-#define MSGCTL		14
-#define SHMAT		21
-#define SHMDT		22
-#define SHMGET		23
-#define SHMCTL		24
-
-/* Used by the DIPC package, try and avoid reusing it */
-#define DIPC            25
-
-#define IPCCALL(version,op)	((version)<<16 | (op))
-
-#ifdef __KERNEL__
 #include <linux/spinlock.h>
 #include <linux/uidgid.h>
+#include <uapi/linux/ipc.h>
 
 #define IPCMNI 32768  /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
 
@@ -99,6 +23,4 @@
 	void		*security;
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_IPC_H */
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index 48dcba9..1487e79 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -30,191 +30,11 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-
 #ifndef __LINUX_IPMI_H
 #define __LINUX_IPMI_H
 
-#include <linux/ipmi_msgdefs.h>
-#include <linux/compiler.h>
+#include <uapi/linux/ipmi.h>
 
-/*
- * This file describes an interface to an IPMI driver.  You have to
- * have a fairly good understanding of IPMI to use this, so go read
- * the specs first before actually trying to do anything.
- *
- * With that said, this driver provides a multi-user interface to the
- * IPMI driver, and it allows multiple IPMI physical interfaces below
- * the driver.  The physical interfaces bind as a lower layer on the
- * driver.  They appear as interfaces to the application using this
- * interface.
- *
- * Multi-user means that multiple applications may use the driver,
- * send commands, receive responses, etc.  The driver keeps track of
- * commands the user sends and tracks the responses.  The responses
- * will go back to the application that send the command.  If the
- * response doesn't come back in time, the driver will return a
- * timeout error response to the application.  Asynchronous events
- * from the BMC event queue will go to all users bound to the driver.
- * The incoming event queue in the BMC will automatically be flushed
- * if it becomes full and it is queried once a second to see if
- * anything is in it.  Incoming commands to the driver will get
- * delivered as commands.
- *
- * This driver provides two main interfaces: one for in-kernel
- * applications and another for userland applications.  The
- * capabilities are basically the same for both interface, although
- * the interfaces are somewhat different.  The stuff in the
- * #ifdef __KERNEL__ below is the in-kernel interface.  The userland
- * interface is defined later in the file.  */
-
-
-
-/*
- * This is an overlay for all the address types, so it's easy to
- * determine the actual address type.  This is kind of like addresses
- * work for sockets.
- */
-#define IPMI_MAX_ADDR_SIZE 32
-struct ipmi_addr {
-	 /* Try to take these from the "Channel Medium Type" table
-	    in section 6.5 of the IPMI 1.5 manual. */
-	int   addr_type;
-	short channel;
-	char  data[IPMI_MAX_ADDR_SIZE];
-};
-
-/*
- * When the address is not used, the type will be set to this value.
- * The channel is the BMC's channel number for the channel (usually
- * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
- */
-#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE	0x0c
-struct ipmi_system_interface_addr {
-	int           addr_type;
-	short         channel;
-	unsigned char lun;
-};
-
-/* An IPMB Address. */
-#define IPMI_IPMB_ADDR_TYPE		0x01
-/* Used for broadcast get device id as described in section 17.9 of the
-   IPMI 1.5 manual. */
-#define IPMI_IPMB_BROADCAST_ADDR_TYPE	0x41
-struct ipmi_ipmb_addr {
-	int           addr_type;
-	short         channel;
-	unsigned char slave_addr;
-	unsigned char lun;
-};
-
-/*
- * A LAN Address.  This is an address to/from a LAN interface bridged
- * by the BMC, not an address actually out on the LAN.
- *
- * A conscious decision was made here to deviate slightly from the IPMI
- * spec.  We do not use rqSWID and rsSWID like it shows in the
- * message.  Instead, we use remote_SWID and local_SWID.  This means
- * that any message (a request or response) from another device will
- * always have exactly the same address.  If you didn't do this,
- * requests and responses from the same device would have different
- * addresses, and that's not too cool.
- *
- * In this address, the remote_SWID is always the SWID the remote
- * message came from, or the SWID we are sending the message to.
- * local_SWID is always our SWID.  Note that having our SWID in the
- * message is a little weird, but this is required.
- */
-#define IPMI_LAN_ADDR_TYPE		0x04
-struct ipmi_lan_addr {
-	int           addr_type;
-	short         channel;
-	unsigned char privilege;
-	unsigned char session_handle;
-	unsigned char remote_SWID;
-	unsigned char local_SWID;
-	unsigned char lun;
-};
-
-
-/*
- * Channel for talking directly with the BMC.  When using this
- * channel, This is for the system interface address type only.  FIXME
- * - is this right, or should we use -1?
- */
-#define IPMI_BMC_CHANNEL  0xf
-#define IPMI_NUM_CHANNELS 0x10
-
-/*
- * Used to signify an "all channel" bitmask.  This is more than the
- * actual number of channels because this is used in userland and
- * will cover us if the number of channels is extended.
- */
-#define IPMI_CHAN_ALL     (~0)
-
-
-/*
- * A raw IPMI message without any addressing.  This covers both
- * commands and responses.  The completion code is always the first
- * byte of data in the response (as the spec shows the messages laid
- * out).
- */
-struct ipmi_msg {
-	unsigned char  netfn;
-	unsigned char  cmd;
-	unsigned short data_len;
-	unsigned char  __user *data;
-};
-
-struct kernel_ipmi_msg {
-	unsigned char  netfn;
-	unsigned char  cmd;
-	unsigned short data_len;
-	unsigned char  *data;
-};
-
-/*
- * Various defines that are useful for IPMI applications.
- */
-#define IPMI_INVALID_CMD_COMPLETION_CODE	0xC1
-#define IPMI_TIMEOUT_COMPLETION_CODE		0xC3
-#define IPMI_UNKNOWN_ERR_COMPLETION_CODE	0xff
-
-
-/*
- * Receive types for messages coming from the receive interface.  This
- * is used for the receive in-kernel interface and in the receive
- * IOCTL.
- *
- * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
- * it allows you to get the message results when you send a response
- * message.
- */
-#define IPMI_RESPONSE_RECV_TYPE		1 /* A response to a command */
-#define IPMI_ASYNC_EVENT_RECV_TYPE	2 /* Something from the event queue */
-#define IPMI_CMD_RECV_TYPE		3 /* A command from somewhere else */
-#define IPMI_RESPONSE_RESPONSE_TYPE	4 /* The response for
-					      a sent response, giving any
-					      error status for sending the
-					      response.  When you send a
-					      response message, this will
-					      be returned. */
-#define IPMI_OEM_RECV_TYPE		5 /* The response for OEM Channels */
-
-/* Note that async events and received commands do not have a completion
-   code as the first byte of the incoming data, unlike a response. */
-
-
-/*
- * Modes for ipmi_set_maint_mode() and the userland IOCTL.  The AUTO
- * setting is the default and means it will be set on certain
- * commands.  Hard setting it on and off will override automatic
- * operation.
- */
-#define IPMI_MAINTENANCE_MODE_AUTO	0
-#define IPMI_MAINTENANCE_MODE_OFF	1
-#define IPMI_MAINTENANCE_MODE_ON	2
-
-#ifdef __KERNEL__
 
 /*
  * The in-kernel interface.
@@ -493,244 +313,4 @@
 /* This is to get the private info of ipmi_smi_t */
 extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data);
 
-#endif /* __KERNEL__ */
-
-
-/*
- * The userland interface
- */
-
-/*
- * The userland interface for the IPMI driver is a standard character
- * device, with each instance of an interface registered as a minor
- * number under the major character device.
- *
- * The read and write calls do not work, to get messages in and out
- * requires ioctl calls because of the complexity of the data.  select
- * and poll do work, so you can wait for input using the file
- * descriptor, you just can use read to get it.
- *
- * In general, you send a command down to the interface and receive
- * responses back.  You can use the msgid value to correlate commands
- * and responses, the driver will take care of figuring out which
- * incoming messages are for which command and find the proper msgid
- * value to report.  You will only receive reponses for commands you
- * send.  Asynchronous events, however, go to all open users, so you
- * must be ready to handle these (or ignore them if you don't care).
- *
- * The address type depends upon the channel type.  When talking
- * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
- * (IPMI_UNUSED_ADDR_TYPE).  When talking to an IPMB channel, you must
- * supply a valid IPMB address with the addr_type set properly.
- *
- * When talking to normal channels, the driver takes care of the
- * details of formatting and sending messages on that channel.  You do
- * not, for instance, have to format a send command, you just send
- * whatever command you want to the channel, the driver will create
- * the send command, automatically issue receive command and get even
- * commands, and pass those up to the proper user.
- */
-
-
-/* The magic IOCTL value for this interface. */
-#define IPMI_IOC_MAGIC 'i'
-
-
-/* Messages sent to the interface are this format. */
-struct ipmi_req {
-	unsigned char __user *addr; /* Address to send the message to. */
-	unsigned int  addr_len;
-
-	long    msgid; /* The sequence number for the message.  This
-			  exact value will be reported back in the
-			  response to this request if it is a command.
-			  If it is a response, this will be used as
-			  the sequence value for the response.  */
-
-	struct ipmi_msg msg;
-};
-/*
- * Send a message to the interfaces.  error values are:
- *   - EFAULT - an address supplied was invalid.
- *   - EINVAL - The address supplied was not valid, or the command
- *              was not allowed.
- *   - EMSGSIZE - The message to was too large.
- *   - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND		_IOR(IPMI_IOC_MAGIC, 13,	\
-					     struct ipmi_req)
-
-/* Messages sent to the interface with timing parameters are this
-   format. */
-struct ipmi_req_settime {
-	struct ipmi_req req;
-
-	/* See ipmi_request_settime() above for details on these
-	   values. */
-	int          retries;
-	unsigned int retry_time_ms;
-};
-/*
- * Send a message to the interfaces with timing parameters.  error values
- * are:
- *   - EFAULT - an address supplied was invalid.
- *   - EINVAL - The address supplied was not valid, or the command
- *              was not allowed.
- *   - EMSGSIZE - The message to was too large.
- *   - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND_SETTIME	_IOR(IPMI_IOC_MAGIC, 21,	\
-					     struct ipmi_req_settime)
-
-/* Messages received from the interface are this format. */
-struct ipmi_recv {
-	int     recv_type; /* Is this a command, response or an
-			      asyncronous event. */
-
-	unsigned char __user *addr;    /* Address the message was from is put
-				   here.  The caller must supply the
-				   memory. */
-	unsigned int  addr_len; /* The size of the address buffer.
-				   The caller supplies the full buffer
-				   length, this value is updated to
-				   the actual message length when the
-				   message is received. */
-
-	long    msgid; /* The sequence number specified in the request
-			  if this is a response.  If this is a command,
-			  this will be the sequence number from the
-			  command. */
-
-	struct ipmi_msg msg; /* The data field must point to a buffer.
-				The data_size field must be set to the
-				size of the message buffer.  The
-				caller supplies the full buffer
-				length, this value is updated to the
-				actual message length when the message
-				is received. */
-};
-
-/*
- * Receive a message.  error values:
- *  - EAGAIN - no messages in the queue.
- *  - EFAULT - an address supplied was invalid.
- *  - EINVAL - The address supplied was not valid.
- *  - EMSGSIZE - The message to was too large to fit into the message buffer,
- *               the message will be left in the buffer. */
-#define IPMICTL_RECEIVE_MSG		_IOWR(IPMI_IOC_MAGIC, 12,	\
-					      struct ipmi_recv)
-
-/*
- * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
- * will truncate the contents instead of leaving the data in the
- * buffer.
- */
-#define IPMICTL_RECEIVE_MSG_TRUNC	_IOWR(IPMI_IOC_MAGIC, 11,	\
-					      struct ipmi_recv)
-
-/* Register to get commands from other entities on this interface. */
-struct ipmi_cmdspec {
-	unsigned char netfn;
-	unsigned char cmd;
-};
-
-/*
- * Register to receive a specific command.  error values:
- *   - EFAULT - an address supplied was invalid.
- *   - EBUSY - The netfn/cmd supplied was already in use.
- *   - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 14,	\
-					     struct ipmi_cmdspec)
-/*
- * Unregister a regsitered command.  error values:
- *  - EFAULT - an address supplied was invalid.
- *  - ENOENT - The netfn/cmd was not found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 15,	\
-					     struct ipmi_cmdspec)
-
-/*
- * Register to get commands from other entities on specific channels.
- * This way, you can only listen on specific channels, or have messages
- * from some channels go to one place and other channels to someplace
- * else.  The chans field is a bitmask, (1 << channel) for each channel.
- * It may be IPMI_CHAN_ALL for all channels.
- */
-struct ipmi_cmdspec_chans {
-	unsigned int netfn;
-	unsigned int cmd;
-	unsigned int chans;
-};
-
-/*
- * Register to receive a specific command on specific channels.  error values:
- *   - EFAULT - an address supplied was invalid.
- *   - EBUSY - One of the netfn/cmd/chans supplied was already in use.
- *   - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD_CHANS	_IOR(IPMI_IOC_MAGIC, 28,	\
-					     struct ipmi_cmdspec_chans)
-/*
- * Unregister some netfn/cmd/chans.  error values:
- *  - EFAULT - an address supplied was invalid.
- *  - ENOENT - None of the netfn/cmd/chans were found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29,	\
-					     struct ipmi_cmdspec_chans)
-
-/*
- * Set whether this interface receives events.  Note that the first
- * user registered for events will get all pending events for the
- * interface.  error values:
- *  - EFAULT - an address supplied was invalid.
- */
-#define IPMICTL_SET_GETS_EVENTS_CMD	_IOR(IPMI_IOC_MAGIC, 16, int)
-
-/*
- * Set and get the slave address and LUN that we will use for our
- * source messages.  Note that this affects the interface, not just
- * this user, so it will affect all users of this interface.  This is
- * so some initialization code can come in and do the OEM-specific
- * things it takes to determine your address (if not the BMC) and set
- * it for everyone else.  You should probably leave the LUN alone.
- */
-struct ipmi_channel_lun_address_set {
-	unsigned short channel;
-	unsigned char  value;
-};
-#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
-	_IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
-	_IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
-#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
-	_IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
-	_IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
-/* Legacy interfaces, these only set IPMB 0. */
-#define IPMICTL_SET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 17, unsigned int)
-#define IPMICTL_GET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 18, unsigned int)
-#define IPMICTL_SET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 19, unsigned int)
-#define IPMICTL_GET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 20, unsigned int)
-
-/*
- * Get/set the default timing values for an interface.  You shouldn't
- * generally mess with these.
- */
-struct ipmi_timing_parms {
-	int          retries;
-	unsigned int retry_time_ms;
-};
-#define IPMICTL_SET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 22, \
-					     struct ipmi_timing_parms)
-#define IPMICTL_GET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 23, \
-					     struct ipmi_timing_parms)
-
-/*
- * Set the maintenance mode.  See ipmi_set_maintenance_mode() above
- * for a description of what this does.
- */
-#define IPMICTL_GET_MAINTENANCE_MODE_CMD	_IOR(IPMI_IOC_MAGIC, 30, int)
-#define IPMICTL_SET_MAINTENANCE_MODE_CMD	_IOW(IPMI_IOC_MAGIC, 31, int)
-
 #endif /* __LINUX_IPMI_H */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 0b94e91..bcba48a 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -1,134 +1,9 @@
 #ifndef _IPV6_H
 #define _IPV6_H
 
-#include <linux/types.h>
-#include <linux/in6.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/ipv6.h>
 
-/* The latest drafts declared increase in minimal mtu up to 1280. */
-
-#define IPV6_MIN_MTU	1280
-
-/*
- *	Advanced API
- *	source interface/address selection, source routing, etc...
- *	*under construction*
- */
-
-
-struct in6_pktinfo {
-	struct in6_addr	ipi6_addr;
-	int		ipi6_ifindex;
-};
-
-struct ip6_mtuinfo {
-	struct sockaddr_in6	ip6m_addr;
-	__u32			ip6m_mtu;
-};
-
-struct in6_ifreq {
-	struct in6_addr	ifr6_addr;
-	__u32		ifr6_prefixlen;
-	int		ifr6_ifindex; 
-};
-
-#define IPV6_SRCRT_STRICT	0x01	/* Deprecated; will be removed */
-#define IPV6_SRCRT_TYPE_0	0	/* Deprecated; will be removed */
-#define IPV6_SRCRT_TYPE_2	2	/* IPv6 type 2 Routing Header	*/
-
-/*
- *	routing header
- */
-struct ipv6_rt_hdr {
-	__u8		nexthdr;
-	__u8		hdrlen;
-	__u8		type;
-	__u8		segments_left;
-
-	/*
-	 *	type specific data
-	 *	variable length field
-	 */
-};
-
-
-struct ipv6_opt_hdr {
-	__u8 		nexthdr;
-	__u8 		hdrlen;
-	/* 
-	 * TLV encoded option data follows.
-	 */
-} __attribute__((packed));	/* required for some archs */
-
-#define ipv6_destopt_hdr ipv6_opt_hdr
-#define ipv6_hopopt_hdr  ipv6_opt_hdr
-
-#ifdef __KERNEL__
 #define ipv6_optlen(p)  (((p)->hdrlen+1) << 3)
-#endif
-
-/*
- *	routing header type 0 (used in cmsghdr struct)
- */
-
-struct rt0_hdr {
-	struct ipv6_rt_hdr	rt_hdr;
-	__u32			reserved;
-	struct in6_addr		addr[0];
-
-#define rt0_type		rt_hdr.type
-};
-
-/*
- *	routing header type 2
- */
-
-struct rt2_hdr {
-	struct ipv6_rt_hdr	rt_hdr;
-	__u32			reserved;
-	struct in6_addr		addr;
-
-#define rt2_type		rt_hdr.type
-};
-
-/*
- *	home address option in destination options header
- */
-
-struct ipv6_destopt_hao {
-	__u8			type;
-	__u8			length;
-	struct in6_addr		addr;
-} __attribute__((packed));
-
-/*
- *	IPv6 fixed header
- *
- *	BEWARE, it is incorrect. The first 4 bits of flow_lbl
- *	are glued to priority now, forming "class".
- */
-
-struct ipv6hdr {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8			priority:4,
-				version:4;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8			version:4,
-				priority:4;
-#else
-#error	"Please fix <asm/byteorder.h>"
-#endif
-	__u8			flow_lbl[3];
-
-	__be16			payload_len;
-	__u8			nexthdr;
-	__u8			hop_limit;
-
-	struct	in6_addr	saddr;
-	struct	in6_addr	daddr;
-};
-
-#ifdef __KERNEL__
 /*
  * This structure contains configuration options per IPv6 link.
  */
@@ -180,43 +55,6 @@
 	__s32 autoconf;
 };
 extern struct ipv6_params ipv6_defaults;
-#endif
-
-/* index values for the variables in ipv6_devconf */
-enum {
-	DEVCONF_FORWARDING = 0,
-	DEVCONF_HOPLIMIT,
-	DEVCONF_MTU6,
-	DEVCONF_ACCEPT_RA,
-	DEVCONF_ACCEPT_REDIRECTS,
-	DEVCONF_AUTOCONF,
-	DEVCONF_DAD_TRANSMITS,
-	DEVCONF_RTR_SOLICITS,
-	DEVCONF_RTR_SOLICIT_INTERVAL,
-	DEVCONF_RTR_SOLICIT_DELAY,
-	DEVCONF_USE_TEMPADDR,
-	DEVCONF_TEMP_VALID_LFT,
-	DEVCONF_TEMP_PREFERED_LFT,
-	DEVCONF_REGEN_MAX_RETRY,
-	DEVCONF_MAX_DESYNC_FACTOR,
-	DEVCONF_MAX_ADDRESSES,
-	DEVCONF_FORCE_MLD_VERSION,
-	DEVCONF_ACCEPT_RA_DEFRTR,
-	DEVCONF_ACCEPT_RA_PINFO,
-	DEVCONF_ACCEPT_RA_RTR_PREF,
-	DEVCONF_RTR_PROBE_INTERVAL,
-	DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
-	DEVCONF_PROXY_NDP,
-	DEVCONF_OPTIMISTIC_DAD,
-	DEVCONF_ACCEPT_SOURCE_ROUTE,
-	DEVCONF_MC_FORWARDING,
-	DEVCONF_DISABLE_IPV6,
-	DEVCONF_ACCEPT_DAD,
-	DEVCONF_FORCE_TLLAO,
-	DEVCONF_MAX
-};
-
-#ifdef __KERNEL__
 #include <linux/icmpv6.h>
 #include <linux/tcp.h>
 #include <linux/udp.h>
@@ -541,6 +379,4 @@
 	 (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr))) && \
 	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
 
-#endif /* __KERNEL__ */
-
 #endif /* _IPV6_H */
diff --git a/include/linux/ipv6_route.h b/include/linux/ipv6_route.h
index 1e7d8af..25b5f1f 100644
--- a/include/linux/ipv6_route.h
+++ b/include/linux/ipv6_route.h
@@ -9,54 +9,11 @@
  *      as published by the Free Software Foundation; either version
  *      2 of the License, or (at your option) any later version.
  */
-
 #ifndef _LINUX_IPV6_ROUTE_H
 #define _LINUX_IPV6_ROUTE_H
 
-#include <linux/types.h>
+#include <uapi/linux/ipv6_route.h>
 
-#define RTF_DEFAULT	0x00010000	/* default - learned via ND	*/
-#define RTF_ALLONLINK	0x00020000	/* (deprecated and will be removed)
-					   fallback, no routers on link */
-#define RTF_ADDRCONF	0x00040000	/* addrconf route - RA		*/
-#define RTF_PREFIX_RT	0x00080000	/* A prefix only route - RA	*/
-#define RTF_ANYCAST	0x00100000	/* Anycast			*/
-
-#define RTF_NONEXTHOP	0x00200000	/* route with no nexthop	*/
-#define RTF_EXPIRES	0x00400000
-
-#define RTF_ROUTEINFO	0x00800000	/* route information - RA	*/
-
-#define RTF_CACHE	0x01000000	/* cache entry			*/
-#define RTF_FLOW	0x02000000	/* flow significant route	*/
-#define RTF_POLICY	0x04000000	/* policy route			*/
-
-#define RTF_PREF(pref)	((pref) << 27)
-#define RTF_PREF_MASK	0x18000000
-
-#define RTF_LOCAL	0x80000000
-
-#ifdef __KERNEL__
 #define IPV6_EXTRACT_PREF(flag)	(((flag) & RTF_PREF_MASK) >> 27)
 #define IPV6_DECODE_PREF(pref)	((pref) ^ 2)	/* 1:low,2:med,3:high */
 #endif
-
-struct in6_rtmsg {
-	struct in6_addr		rtmsg_dst;
-	struct in6_addr		rtmsg_src;
-	struct in6_addr		rtmsg_gateway;
-	__u32			rtmsg_type;
-	__u16			rtmsg_dst_len;
-	__u16			rtmsg_src_len;
-	__u32			rtmsg_metric;
-	unsigned long		rtmsg_info;
-        __u32			rtmsg_flags;
-	int			rtmsg_ifindex;
-};
-
-#define RTMSG_NEWDEVICE		0x11
-#define RTMSG_DELDEVICE		0x12
-#define RTMSG_NEWROUTE		0x21
-#define RTMSG_DELROUTE		0x22
-
-#endif
diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h
index 3bc4dca..0a2dc46 100644
--- a/include/linux/irqnr.h
+++ b/include/linux/irqnr.h
@@ -1,10 +1,8 @@
 #ifndef _LINUX_IRQNR_H
 #define _LINUX_IRQNR_H
 
-/*
- * Generic irq_desc iterators:
- */
-#ifdef __KERNEL__
+#include <uapi/linux/irqnr.h>
+
 
 #ifndef CONFIG_GENERIC_HARDIRQS
 #include <asm/irq.h>
@@ -57,6 +55,4 @@
 #define for_each_irq_nr(irq)                   \
        for (irq = 0; irq < nr_irqs; irq++)
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
index 215c416..1e9a0f2 100644
--- a/include/linux/isdn.h
+++ b/include/linux/isdn.h
@@ -10,136 +10,9 @@
  * of the GNU General Public License, incorporated herein by reference.
  *
  */
-
 #ifndef __ISDN_H__
 #define __ISDN_H__
 
-#include <linux/ioctl.h>
-#include <linux/tty.h>
-
-#define ISDN_MAX_DRIVERS    32
-#define ISDN_MAX_CHANNELS   64
-
-/* New ioctl-codes */
-#define IIOCNETAIF  _IO('I',1)
-#define IIOCNETDIF  _IO('I',2)
-#define IIOCNETSCF  _IO('I',3)
-#define IIOCNETGCF  _IO('I',4)
-#define IIOCNETANM  _IO('I',5)
-#define IIOCNETDNM  _IO('I',6)
-#define IIOCNETGNM  _IO('I',7)
-#define IIOCGETSET  _IO('I',8) /* no longer supported */
-#define IIOCSETSET  _IO('I',9) /* no longer supported */
-#define IIOCSETVER  _IO('I',10)
-#define IIOCNETHUP  _IO('I',11)
-#define IIOCSETGST  _IO('I',12)
-#define IIOCSETBRJ  _IO('I',13)
-#define IIOCSIGPRF  _IO('I',14)
-#define IIOCGETPRF  _IO('I',15)
-#define IIOCSETPRF  _IO('I',16)
-#define IIOCGETMAP  _IO('I',17)
-#define IIOCSETMAP  _IO('I',18)
-#define IIOCNETASL  _IO('I',19)
-#define IIOCNETDIL  _IO('I',20)
-#define IIOCGETCPS  _IO('I',21)
-#define IIOCGETDVR  _IO('I',22)
-#define IIOCNETLCR  _IO('I',23) /* dwabc ioctl for LCR from isdnlog */
-#define IIOCNETDWRSET  _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */
-
-#define IIOCNETALN  _IO('I',32)
-#define IIOCNETDLN  _IO('I',33)
-
-#define IIOCNETGPN  _IO('I',34)
-
-#define IIOCDBGVAR  _IO('I',127)
-
-#define IIOCDRVCTL  _IO('I',128)
-
-/* cisco hdlck device private ioctls */
-#define SIOCGKEEPPERIOD	(SIOCDEVPRIVATE + 0)
-#define SIOCSKEEPPERIOD	(SIOCDEVPRIVATE + 1)
-#define SIOCGDEBSERINT	(SIOCDEVPRIVATE + 2)
-#define SIOCSDEBSERINT	(SIOCDEVPRIVATE + 3)
-
-/* Packet encapsulations for net-interfaces */
-#define ISDN_NET_ENCAP_ETHER      0
-#define ISDN_NET_ENCAP_RAWIP      1
-#define ISDN_NET_ENCAP_IPTYP      2
-#define ISDN_NET_ENCAP_CISCOHDLC  3 /* Without SLARP and keepalive */
-#define ISDN_NET_ENCAP_SYNCPPP    4
-#define ISDN_NET_ENCAP_UIHDLC     5
-#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive    */
-#define ISDN_NET_ENCAP_X25IFACE   7 /* Documentation/networking/x25-iface.txt */
-#define ISDN_NET_ENCAP_MAX_ENCAP  ISDN_NET_ENCAP_X25IFACE
-
-/* Facility which currently uses an ISDN-channel */
-#define ISDN_USAGE_NONE       0
-#define ISDN_USAGE_RAW        1
-#define ISDN_USAGE_MODEM      2
-#define ISDN_USAGE_NET        3
-#define ISDN_USAGE_VOICE      4
-#define ISDN_USAGE_FAX        5
-#define ISDN_USAGE_MASK       7 /* Mask to get plain usage */
-#define ISDN_USAGE_DISABLED  32 /* This bit is set, if channel is disabled */
-#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */
-#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing  */
-
-#define ISDN_MODEM_NUMREG    24        /* Number of Modem-Registers        */
-#define ISDN_LMSNLEN         255 /* Length of tty's Listen-MSN string */
-#define ISDN_CMSGLEN	     50	 /* Length of CONNECT-Message to add for Modem */
-
-#define ISDN_MSNLEN          32
-#define NET_DV 0x06  /* Data version for isdn_net_ioctl_cfg   */
-#define TTY_DV 0x06  /* Data version for iprofd etc.          */
-
-#define INF_DV 0x01  /* Data version for /dev/isdninfo        */
-
-typedef struct {
-  char drvid[25];
-  unsigned long arg;
-} isdn_ioctl_struct;
-
-typedef struct {
-  char name[10];
-  char phone[ISDN_MSNLEN];
-  int  outgoing;
-} isdn_net_ioctl_phone;
-
-typedef struct {
-  char name[10];     /* Name of interface                     */
-  char master[10];   /* Name of Master for Bundling           */
-  char slave[10];    /* Name of Slave for Bundling            */
-  char eaz[256];     /* EAZ/MSN                               */
-  char drvid[25];    /* DriverId for Bindings                 */
-  int  onhtime;      /* Hangup-Timeout                        */
-  int  charge;       /* Charge-Units                          */
-  int  l2_proto;     /* Layer-2 protocol                      */
-  int  l3_proto;     /* Layer-3 protocol                      */
-  int  p_encap;      /* Encapsulation                         */
-  int  exclusive;    /* Channel, if bound exclusive           */
-  int  dialmax;      /* Dial Retry-Counter                    */
-  int  slavedelay;   /* Delay until slave starts up           */
-  int  cbdelay;      /* Delay before Callback                 */
-  int  chargehup;    /* Flag: Charge-Hangup                   */
-  int  ihup;         /* Flag: Hangup-Timeout on incoming line */
-  int  secure;       /* Flag: Secure                          */
-  int  callback;     /* Flag: Callback                        */
-  int  cbhup;        /* Flag: Reject Call before Callback     */
-  int  pppbind;      /* ippp device for bindings              */
-  int  chargeint;    /* Use fixed charge interval length      */
-  int  triggercps;   /* BogoCPS needed for triggering slave   */
-  int  dialtimeout;  /* Dial-Timeout                          */
-  int  dialwait;     /* Time to wait after failed dial        */
-  int  dialmode;     /* Flag: off / on / auto                 */
-} isdn_net_ioctl_cfg;
-
-#define ISDN_NET_DIALMODE_MASK  0xC0    /* bits for status                */
-#define ISDN_NET_DM_OFF	        0x00    /* this interface is stopped      */
-#define ISDN_NET_DM_MANUAL	0x40    /* this interface is on (manual)  */
-#define ISDN_NET_DM_AUTO	0x80    /* this interface is autodial     */
-#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK)
-
-#ifdef __KERNEL__
 
 #include <linux/errno.h>
 #include <linux/fs.h>
@@ -163,6 +36,7 @@
 #include <linux/skbuff.h>
 #include <linux/tcp.h>
 #include <linux/mutex.h>
+#include <uapi/linux/isdn.h>
 
 #define ISDN_TTY_MAJOR    43
 #define ISDN_TTYAUX_MAJOR 44
@@ -595,6 +469,4 @@
 extern isdn_dev *dev;
 
 
-#endif /* __KERNEL__ */
-
 #endif /* __ISDN_H__ */
diff --git a/include/linux/isdn_divertif.h b/include/linux/isdn_divertif.h
index a5a50f5..19ab361 100644
--- a/include/linux/isdn_divertif.h
+++ b/include/linux/isdn_divertif.h
@@ -9,26 +9,12 @@
  * of the GNU General Public License, incorporated herein by reference.
  *
  */
-
 #ifndef _LINUX_ISDN_DIVERTIF_H
 #define _LINUX_ISDN_DIVERTIF_H
 
-/***********************************************************/
-/* magic value is also used to control version information */
-/***********************************************************/
-#define DIVERT_IF_MAGIC 0x25873401
-#define DIVERT_CMD_REG  0x00  /* register command */
-#define DIVERT_CMD_REL  0x01  /* release command */
-#define DIVERT_NO_ERR   0x00  /* return value no error */
-#define DIVERT_CMD_ERR  0x01  /* invalid cmd */
-#define DIVERT_VER_ERR  0x02  /* magic/version invalid */
-#define DIVERT_REG_ERR  0x03  /* module already registered */
-#define DIVERT_REL_ERR  0x04  /* module not registered */
-#define DIVERT_REG_NAME isdn_register_divert
-
-#ifdef __KERNEL__
 #include <linux/isdnif.h>
 #include <linux/types.h>
+#include <uapi/linux/isdn_divertif.h>
 
 /***************************************************************/
 /* structure exchanging data between isdn hl and divert module */
@@ -46,6 +32,4 @@
 /* function register */
 /*********************/
 extern int DIVERT_REG_NAME(isdn_divert_if *);
-#endif
-
 #endif /* _LINUX_ISDN_DIVERTIF_H */
diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h
index 8687a7d..d5f62bc 100644
--- a/include/linux/isdn_ppp.h
+++ b/include/linux/isdn_ppp.h
@@ -9,68 +9,16 @@
  * of the GNU General Public License, incorporated herein by reference.
  *
  */
-
 #ifndef _LINUX_ISDN_PPP_H
 #define _LINUX_ISDN_PPP_H
 
-#define CALLTYPE_INCOMING 0x1
-#define CALLTYPE_OUTGOING 0x2
-#define CALLTYPE_CALLBACK 0x4
-
-#define IPPP_VERSION    "2.2.0"
-
-struct pppcallinfo
-{
-  int calltype;
-  unsigned char local_num[64];
-  unsigned char remote_num[64];
-  int charge_units;
-};
-
-#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo)
-#define PPPIOCBUNDLE   _IOW('t',129,int)
-#define PPPIOCGMPFLAGS _IOR('t',130,int)
-#define PPPIOCSMPFLAGS _IOW('t',131,int)
-#define PPPIOCSMPMTU   _IOW('t',132,int)
-#define PPPIOCSMPMRU   _IOW('t',133,int)
-#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8])
-#define PPPIOCSCOMPRESSOR _IOW('t',135,int)
-#define PPPIOCGIFNAME      _IOR('t',136, char [IFNAMSIZ] )
-
-
-#define SC_MP_PROT       0x00000200
-#define SC_REJ_MP_PROT   0x00000400
-#define SC_OUT_SHORT_SEQ 0x00000800
-#define SC_IN_SHORT_SEQ  0x00004000
-
-#define SC_DECOMP_ON		0x01
-#define SC_COMP_ON		0x02
-#define SC_DECOMP_DISCARD	0x04
-#define SC_COMP_DISCARD		0x08
-#define SC_LINK_DECOMP_ON	0x10
-#define SC_LINK_COMP_ON		0x20
-#define SC_LINK_DECOMP_DISCARD	0x40
-#define SC_LINK_COMP_DISCARD	0x80
-
-#define ISDN_PPP_COMP_MAX_OPTIONS 16
-
-#define IPPP_COMP_FLAG_XMIT 0x1
-#define IPPP_COMP_FLAG_LINK 0x2
-
-struct isdn_ppp_comp_data {
-  int num;
-  unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS];
-  int optlen;
-  int flags;
-};
-
-#ifdef __KERNEL__
 
 
 
 #ifdef CONFIG_IPPP_FILTER
 #include <linux/filter.h>
 #endif
+#include <uapi/linux/isdn_ppp.h>
 
 #define DECOMP_ERR_NOMEM	(-10)
 
@@ -244,5 +192,4 @@
   unsigned long compflags;
 };
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_ISDN_PPP_H */
diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h
index b8c23f8..0fc6ff2 100644
--- a/include/linux/isdnif.h
+++ b/include/linux/isdnif.h
@@ -10,51 +10,12 @@
  * of the GNU General Public License, incorporated herein by reference.
  *
  */
-
 #ifndef __ISDNIF_H__
 #define __ISDNIF_H__
 
 
-/*
- * Values for general protocol-selection
- */
-#define ISDN_PTYPE_UNKNOWN   0   /* Protocol undefined   */
-#define ISDN_PTYPE_1TR6      1   /* german 1TR6-protocol */
-#define ISDN_PTYPE_EURO      2   /* EDSS1-protocol       */
-#define ISDN_PTYPE_LEASED    3   /* for leased lines     */
-#define ISDN_PTYPE_NI1       4   /* US NI-1 protocol     */
-#define ISDN_PTYPE_MAX       7   /* Max. 8 Protocols     */
-
-/*
- * Values for Layer-2-protocol-selection
- */
-#define ISDN_PROTO_L2_X75I   0   /* X75/LAPB with I-Frames            */
-#define ISDN_PROTO_L2_X75UI  1   /* X75/LAPB with UI-Frames           */
-#define ISDN_PROTO_L2_X75BUI 2   /* X75/LAPB with UI-Frames           */
-#define ISDN_PROTO_L2_HDLC   3   /* HDLC                              */
-#define ISDN_PROTO_L2_TRANS  4   /* Transparent (Voice)               */
-#define ISDN_PROTO_L2_X25DTE 5   /* X25/LAPB DTE mode                 */
-#define ISDN_PROTO_L2_X25DCE 6   /* X25/LAPB DCE mode                 */
-#define ISDN_PROTO_L2_V11096 7   /* V.110 bitrate adaption 9600 Baud  */
-#define ISDN_PROTO_L2_V11019 8   /* V.110 bitrate adaption 19200 Baud */
-#define ISDN_PROTO_L2_V11038 9   /* V.110 bitrate adaption 38400 Baud */
-#define ISDN_PROTO_L2_MODEM  10  /* Analog Modem on Board */
-#define ISDN_PROTO_L2_FAX    11  /* Fax Group 2/3         */
-#define ISDN_PROTO_L2_HDLC_56K 12   /* HDLC 56k                          */
-#define ISDN_PROTO_L2_MAX    15  /* Max. 16 Protocols                 */
-
-/*
- * Values for Layer-3-protocol-selection
- */
-#define ISDN_PROTO_L3_TRANS	0	/* Transparent */
-#define ISDN_PROTO_L3_TRANSDSP	1	/* Transparent with DSP */
-#define ISDN_PROTO_L3_FCLASS2	2	/* Fax Group 2/3 CLASS 2 */
-#define ISDN_PROTO_L3_FCLASS1	3	/* Fax Group 2/3 CLASS 1 */
-#define ISDN_PROTO_L3_MAX	7	/* Max. 8 Protocols */
-
-#ifdef __KERNEL__
-
 #include <linux/skbuff.h>
+#include <uapi/linux/isdnif.h>
 
 /***************************************************************************/
 /* Extensions made by Werner Cornelius (werner@ikt.de)                     */
@@ -541,6 +502,4 @@
 extern int register_isdn(isdn_if*);
 #include <asm/uaccess.h>
 
-#endif /* __KERNEL__ */
-
 #endif /* __ISDNIF_H__ */
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 05e3c2c..6b87413 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -51,31 +51,17 @@
 #define SH_DIV(NOM,DEN,LSH) (   (((NOM) / (DEN)) << (LSH))              \
                              + ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN))
 
-#ifdef CLOCK_TICK_RATE
 /* LATCH is used in the interval timer and ftape setup. */
-# define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */
+#define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */
 
-/*
- * HZ is the requested value. However the CLOCK_TICK_RATE may not allow
- * for exactly HZ. So SHIFTED_HZ is high res HZ ("<< 8" is for accuracy)
- */
-# define SHIFTED_HZ (SH_DIV(CLOCK_TICK_RATE, LATCH, 8))
-#else
-# define SHIFTED_HZ (HZ << 8)
-#endif
+extern int register_refined_jiffies(long clock_tick_rate);
 
 /* TICK_NSEC is the time between ticks in nsec assuming SHIFTED_HZ */
-#define TICK_NSEC (SH_DIV(1000000UL * 1000, SHIFTED_HZ, 8))
+#define TICK_NSEC ((NSEC_PER_SEC+HZ/2)/HZ)
 
 /* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
 #define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
 
-/*
- * TICK_USEC_TO_NSEC is the time between ticks in nsec assuming SHIFTED_HZ and
- * a value TUSEC for TICK_USEC (can be set bij adjtimex)
- */
-#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV(TUSEC * USER_HZ * 1000, SHIFTED_HZ, 8))
-
 /* some arch's have a small-data section that can be accessed register-relative
  * but that can only take up to, say, 4-byte variables. jiffies being part of
  * an 8-byte variable may not be correctly accessed unless we force the issue
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
index 47199b1..cbf2aa9 100644
--- a/include/linux/joystick.h
+++ b/include/linux/joystick.h
@@ -1,12 +1,8 @@
-#ifndef _LINUX_JOYSTICK_H
-#define _LINUX_JOYSTICK_H
-
 /*
  *  Copyright (C) 1996-2000 Vojtech Pavlik
  *
  *  Sponsored by SuSE
  */
-
 /*
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -26,113 +22,11 @@
  * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
  * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
  */
+#ifndef _LINUX_JOYSTICK_H
+#define _LINUX_JOYSTICK_H
 
-#include <linux/types.h>
-#include <linux/input.h>
+#include <uapi/linux/joystick.h>
 
-/*
- * Version
- */
-
-#define JS_VERSION		0x020100
-
-/*
- * Types and constants for reading from /dev/js
- */
-
-#define JS_EVENT_BUTTON		0x01	/* button pressed/released */
-#define JS_EVENT_AXIS		0x02	/* joystick moved */
-#define JS_EVENT_INIT		0x80	/* initial state of device */
-
-struct js_event {
-	__u32 time;	/* event timestamp in milliseconds */
-	__s16 value;	/* value */
-	__u8 type;	/* event type */
-	__u8 number;	/* axis/button number */
-};
-
-/*
- * IOCTL commands for joystick driver
- */
-
-#define JSIOCGVERSION		_IOR('j', 0x01, __u32)				/* get driver version */
-
-#define JSIOCGAXES		_IOR('j', 0x11, __u8)				/* get number of axes */
-#define JSIOCGBUTTONS		_IOR('j', 0x12, __u8)				/* get number of buttons */
-#define JSIOCGNAME(len)		_IOC(_IOC_READ, 'j', 0x13, len)			/* get identifier string */
-
-#define JSIOCSCORR		_IOW('j', 0x21, struct js_corr)			/* set correction values */
-#define JSIOCGCORR		_IOR('j', 0x22, struct js_corr)			/* get correction values */
-
-#define JSIOCSAXMAP		_IOW('j', 0x31, __u8[ABS_CNT])			/* set axis mapping */
-#define JSIOCGAXMAP		_IOR('j', 0x32, __u8[ABS_CNT])			/* get axis mapping */
-#define JSIOCSBTNMAP		_IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1])	/* set button mapping */
-#define JSIOCGBTNMAP		_IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1])	/* get button mapping */
-
-/*
- * Types and constants for get/set correction
- */
-
-#define JS_CORR_NONE		0x00	/* returns raw values */
-#define JS_CORR_BROKEN		0x01	/* broken line */
-
-struct js_corr {
-	__s32 coef[8];
-	__s16 prec;
-	__u16 type;
-};
-
-/*
- * v0.x compatibility definitions
- */
-
-#define JS_RETURN		sizeof(struct JS_DATA_TYPE)
-#define JS_TRUE			1
-#define JS_FALSE		0
-#define JS_X_0			0x01
-#define JS_Y_0			0x02
-#define JS_X_1			0x04
-#define JS_Y_1			0x08
-#define JS_MAX			2
-
-#define JS_DEF_TIMEOUT		0x1300
-#define JS_DEF_CORR		0
-#define JS_DEF_TIMELIMIT	10L
-
-#define JS_SET_CAL		1
-#define JS_GET_CAL		2
-#define JS_SET_TIMEOUT		3
-#define JS_GET_TIMEOUT		4
-#define JS_SET_TIMELIMIT	5
-#define JS_GET_TIMELIMIT	6
-#define JS_GET_ALL		7
-#define JS_SET_ALL		8
-
-struct JS_DATA_TYPE {
-	__s32 buttons;
-	__s32 x;
-	__s32 y;
-};
-
-struct JS_DATA_SAVE_TYPE_32 {
-	__s32 JS_TIMEOUT;
-	__s32 BUSY;
-	__s32 JS_EXPIRETIME;
-	__s32 JS_TIMELIMIT;
-	struct JS_DATA_TYPE JS_SAVE;
-	struct JS_DATA_TYPE JS_CORR;
-};
-
-struct JS_DATA_SAVE_TYPE_64 {
-	__s32 JS_TIMEOUT;
-	__s32 BUSY;
-	__s64 JS_EXPIRETIME;
-	__s64 JS_TIMELIMIT;
-	struct JS_DATA_TYPE JS_SAVE;
-	struct JS_DATA_TYPE JS_CORR;
-};
-
-#ifdef __KERNEL__
 #if BITS_PER_LONG == 64
 #define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_64
 #elif BITS_PER_LONG == 32
@@ -140,6 +34,4 @@
 #else
 #error Unexpected BITS_PER_LONG
 #endif
-#endif
-
 #endif /* _LINUX_JOYSTICK_H */
diff --git a/include/linux/kd.h b/include/linux/kd.h
index c36d847..25bd17f 100644
--- a/include/linux/kd.h
+++ b/include/linux/kd.h
@@ -1,186 +1,7 @@
 #ifndef _LINUX_KD_H
 #define _LINUX_KD_H
-#include <linux/types.h>
-#include <linux/compiler.h>
 
-/* 0x4B is 'K', to avoid collision with termios and vt */
+#include <uapi/linux/kd.h>
 
-#define GIO_FONT	0x4B60	/* gets font in expanded form */
-#define PIO_FONT	0x4B61	/* use font in expanded form */
-
-#define GIO_FONTX	0x4B6B	/* get font using struct consolefontdesc */
-#define PIO_FONTX	0x4B6C	/* set font using struct consolefontdesc */
-struct consolefontdesc {
-	unsigned short charcount;	/* characters in font (256 or 512) */
-	unsigned short charheight;	/* scan lines per character (1-32) */
-	char __user *chardata;		/* font data in expanded form */
-};
-
-#define PIO_FONTRESET   0x4B6D	/* reset to default font */
-
-#define GIO_CMAP	0x4B70	/* gets colour palette on VGA+ */
-#define PIO_CMAP	0x4B71	/* sets colour palette on VGA+ */
-
-#define KIOCSOUND	0x4B2F	/* start sound generation (0 for off) */
-#define KDMKTONE	0x4B30	/* generate tone */
-
-#define KDGETLED	0x4B31	/* return current led state */
-#define KDSETLED	0x4B32	/* set led state [lights, not flags] */
-#define 	LED_SCR		0x01	/* scroll lock led */
-#define 	LED_NUM		0x02	/* num lock led */
-#define 	LED_CAP		0x04	/* caps lock led */
-
-#define KDGKBTYPE	0x4B33	/* get keyboard type */
-#define 	KB_84		0x01
-#define 	KB_101		0x02 	/* this is what we always answer */
-#define 	KB_OTHER	0x03
-
-#define KDADDIO		0x4B34	/* add i/o port as valid */
-#define KDDELIO		0x4B35	/* del i/o port as valid */
-#define KDENABIO	0x4B36	/* enable i/o to video board */
-#define KDDISABIO	0x4B37	/* disable i/o to video board */
-
-#define KDSETMODE	0x4B3A	/* set text/graphics mode */
-#define		KD_TEXT		0x00
-#define		KD_GRAPHICS	0x01
-#define		KD_TEXT0	0x02	/* obsolete */
-#define		KD_TEXT1	0x03	/* obsolete */
-#define KDGETMODE	0x4B3B	/* get current mode */
-
-#define KDMAPDISP	0x4B3C	/* map display into address space */
-#define KDUNMAPDISP	0x4B3D	/* unmap display from address space */
-
-typedef char scrnmap_t;
-#define		E_TABSZ		256
-#define GIO_SCRNMAP	0x4B40	/* get screen mapping from kernel */
-#define PIO_SCRNMAP	0x4B41	/* put screen mapping table in kernel */
-#define GIO_UNISCRNMAP  0x4B69	/* get full Unicode screen mapping */
-#define PIO_UNISCRNMAP  0x4B6A  /* set full Unicode screen mapping */
-
-#define GIO_UNIMAP	0x4B66	/* get unicode-to-font mapping from kernel */
-struct unipair {
-	unsigned short unicode;
-	unsigned short fontpos;
-};
-struct unimapdesc {
-	unsigned short entry_ct;
-	struct unipair __user *entries;
-};
-#define PIO_UNIMAP	0x4B67	/* put unicode-to-font mapping in kernel */
-#define PIO_UNIMAPCLR	0x4B68	/* clear table, possibly advise hash algorithm */
-struct unimapinit {
-	unsigned short advised_hashsize;  /* 0 if no opinion */
-	unsigned short advised_hashstep;  /* 0 if no opinion */
-	unsigned short advised_hashlevel; /* 0 if no opinion */
-};
-
-#define UNI_DIRECT_BASE 0xF000	/* start of Direct Font Region */
-#define UNI_DIRECT_MASK 0x01FF	/* Direct Font Region bitmask */
-
-#define		K_RAW		0x00
-#define		K_XLATE		0x01
-#define		K_MEDIUMRAW	0x02
-#define		K_UNICODE	0x03
-#define		K_OFF		0x04
-#define KDGKBMODE	0x4B44	/* gets current keyboard mode */
-#define KDSKBMODE	0x4B45	/* sets current keyboard mode */
-
-#define		K_METABIT	0x03
-#define		K_ESCPREFIX	0x04
-#define KDGKBMETA	0x4B62	/* gets meta key handling mode */
-#define KDSKBMETA	0x4B63	/* sets meta key handling mode */
-
-#define		K_SCROLLLOCK	0x01
-#define		K_NUMLOCK	0x02
-#define		K_CAPSLOCK	0x04
-#define	KDGKBLED	0x4B64	/* get led flags (not lights) */
-#define	KDSKBLED	0x4B65	/* set led flags (not lights) */
-
-struct kbentry {
-	unsigned char kb_table;
-	unsigned char kb_index;
-	unsigned short kb_value;
-};
-#define		K_NORMTAB	0x00
-#define		K_SHIFTTAB	0x01
-#define		K_ALTTAB	0x02
-#define		K_ALTSHIFTTAB	0x03
-
-#define KDGKBENT	0x4B46	/* gets one entry in translation table */
-#define KDSKBENT	0x4B47	/* sets one entry in translation table */
-
-struct kbsentry {
-	unsigned char kb_func;
-	unsigned char kb_string[512];
-};
-#define KDGKBSENT	0x4B48	/* gets one function key string entry */
-#define KDSKBSENT	0x4B49	/* sets one function key string entry */
-
-struct kbdiacr {
-        unsigned char diacr, base, result;
-};
-struct kbdiacrs {
-        unsigned int kb_cnt;    /* number of entries in following array */
-	struct kbdiacr kbdiacr[256];    /* MAX_DIACR from keyboard.h */
-};
-#define KDGKBDIACR      0x4B4A  /* read kernel accent table */
-#define KDSKBDIACR      0x4B4B  /* write kernel accent table */
-
-struct kbdiacruc {
-	unsigned int diacr, base, result;
-};
-struct kbdiacrsuc {
-        unsigned int kb_cnt;    /* number of entries in following array */
-	struct kbdiacruc kbdiacruc[256];    /* MAX_DIACR from keyboard.h */
-};
-#define KDGKBDIACRUC    0x4BFA  /* read kernel accent table - UCS */
-#define KDSKBDIACRUC    0x4BFB  /* write kernel accent table - UCS */
-
-struct kbkeycode {
-	unsigned int scancode, keycode;
-};
-#define KDGETKEYCODE	0x4B4C	/* read kernel keycode table entry */
-#define KDSETKEYCODE	0x4B4D	/* write kernel keycode table entry */
-
-#define KDSIGACCEPT	0x4B4E	/* accept kbd generated signals */
-
-struct kbd_repeat {
-	int delay;	/* in msec; <= 0: don't change */
-	int period;	/* in msec; <= 0: don't change */
-			/* earlier this field was misnamed "rate" */
-};
-
-#define KDKBDREP        0x4B52  /* set keyboard delay/repeat rate;
-				 * actually used values are returned */
-
-#define KDFONTOP	0x4B72	/* font operations */
-
-struct console_font_op {
-	unsigned int op;	/* operation code KD_FONT_OP_* */
-	unsigned int flags;	/* KD_FONT_FLAG_* */
-	unsigned int width, height;	/* font size */
-	unsigned int charcount;
-	unsigned char __user *data;	/* font data with height fixed to 32 */
-};
-
-struct console_font {
-	unsigned int width, height;	/* font size */
-	unsigned int charcount;
-	unsigned char *data;	/* font data with height fixed to 32 */
-};
-
-#define KD_FONT_OP_SET		0	/* Set font */
-#define KD_FONT_OP_GET		1	/* Get font */
-#define KD_FONT_OP_SET_DEFAULT	2	/* Set font to default, data points to name / NULL */
-#define KD_FONT_OP_COPY		3	/* Copy from another console */
-
-#define KD_FONT_FLAG_DONT_RECALC 	1	/* Don't recalculate hw charcell size [compat] */
-#ifdef __KERNEL__
 #define KD_FONT_FLAG_OLD		0x80000000	/* Invoked via old interface [compat] */
-#endif
-
-/* note: 0x4B00-0x4B4E all have had a value at some time;
-   don't reuse for the time being */
-/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */
-
 #endif /* _LINUX_KD_H */
diff --git a/include/linux/kdev_t.h b/include/linux/kdev_t.h
index 2dacab8..c838abe 100644
--- a/include/linux/kdev_t.h
+++ b/include/linux/kdev_t.h
@@ -1,6 +1,8 @@
 #ifndef _LINUX_KDEV_T_H
 #define _LINUX_KDEV_T_H
-#ifdef __KERNEL__
+
+#include <uapi/linux/kdev_t.h>
+
 #define MINORBITS	20
 #define MINORMASK	((1U << MINORBITS) - 1)
 
@@ -87,14 +89,4 @@
 	return dev & 0x3ffff;
 }
 
-#else /* __KERNEL__ */
-
-/*
-Some programs want their definitions of MAJOR and MINOR and MKDEV
-from the kernel sources. These must be the externally visible ones.
-*/
-#define MAJOR(dev)	((dev)>>8)
-#define MINOR(dev)	((dev) & 0xff)
-#define MKDEV(ma,mi)	((ma)<<8 | (mi))
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/kernel-page-flags.h b/include/linux/kernel-page-flags.h
index a1bdf69..546eb6a 100644
--- a/include/linux/kernel-page-flags.h
+++ b/include/linux/kernel-page-flags.h
@@ -1,38 +1,8 @@
 #ifndef LINUX_KERNEL_PAGE_FLAGS_H
 #define LINUX_KERNEL_PAGE_FLAGS_H
 
-/*
- * Stable page flag bits exported to user space
- */
+#include <uapi/linux/kernel-page-flags.h>
 
-#define KPF_LOCKED		0
-#define KPF_ERROR		1
-#define KPF_REFERENCED		2
-#define KPF_UPTODATE		3
-#define KPF_DIRTY		4
-#define KPF_LRU			5
-#define KPF_ACTIVE		6
-#define KPF_SLAB		7
-#define KPF_WRITEBACK		8
-#define KPF_RECLAIM		9
-#define KPF_BUDDY		10
-
-/* 11-20: new additions in 2.6.31 */
-#define KPF_MMAP		11
-#define KPF_ANON		12
-#define KPF_SWAPCACHE		13
-#define KPF_SWAPBACKED		14
-#define KPF_COMPOUND_HEAD	15
-#define KPF_COMPOUND_TAIL	16
-#define KPF_HUGE		17
-#define KPF_UNEVICTABLE		18
-#define KPF_HWPOISON		19
-#define KPF_NOPAGE		20
-
-#define KPF_KSM			21
-#define KPF_THP			22
-
-#ifdef __KERNEL__
 
 /* kernel hacking assistances
  * WARNING: subject to change, never rely on them!
@@ -46,6 +16,4 @@
 #define KPF_ARCH		38
 #define KPF_UNCACHED		39
 
-#endif /* __KERNEL__ */
-
 #endif /* LINUX_KERNEL_PAGE_FLAGS_H */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 2451f1f..a123b13 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -1,15 +1,6 @@
 #ifndef _LINUX_KERNEL_H
 #define _LINUX_KERNEL_H
 
-#include <linux/sysinfo.h>
-
-/*
- * 'kernel.h' contains some often-used function prototypes etc
- */
-#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
-#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
-
-#ifdef __KERNEL__
 
 #include <stdarg.h>
 #include <linux/linkage.h>
@@ -22,6 +13,7 @@
 #include <linux/printk.h>
 #include <linux/dynamic_debug.h>
 #include <asm/byteorder.h>
+#include <uapi/linux/kernel.h>
 
 #define USHRT_MAX	((u16)(~0U))
 #define SHRT_MAX	((s16)(USHRT_MAX>>1))
@@ -716,6 +708,4 @@
 
 extern int do_sysinfo(struct sysinfo *info);
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/kernelcapi.h b/include/linux/kernelcapi.h
index 9c26839..9be37da 100644
--- a/include/linux/kernelcapi.h
+++ b/include/linux/kernelcapi.h
@@ -6,49 +6,15 @@
  * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
  * 
  */
-
 #ifndef __KERNELCAPI_H__
 #define __KERNELCAPI_H__
 
-#define CAPI_MAXAPPL	240	/* maximum number of applications  */
-#define CAPI_MAXCONTR	32	/* maximum number of controller    */
-#define CAPI_MAXDATAWINDOW	8
-
-
-typedef struct kcapi_flagdef {
-	int contr;
-	int flag;
-} kcapi_flagdef;
-
-typedef struct kcapi_carddef {
-	char		driver[32];
-	unsigned int	port;
-	unsigned	irq;
-	unsigned int	membase;
-	int		cardnr;
-} kcapi_carddef;
-
-/* new ioctls >= 10 */
-#define KCAPI_CMD_TRACE		10
-#define KCAPI_CMD_ADDCARD	11	/* OBSOLETE */
-
-/* 
- * flag > 2 => trace also data
- * flag & 1 => show trace
- */
-#define KCAPI_TRACE_OFF			0
-#define KCAPI_TRACE_SHORT_NO_DATA	1
-#define KCAPI_TRACE_FULL_NO_DATA	2
-#define KCAPI_TRACE_SHORT		3
-#define KCAPI_TRACE_FULL		4
-
-
-#ifdef __KERNEL__
 
 #include <linux/list.h>
 #include <linux/skbuff.h>
 #include <linux/workqueue.h>
 #include <linux/notifier.h>
+#include <uapi/linux/kernelcapi.h>
 
 struct capi20_appl {
 	u16 applid;
@@ -150,6 +116,4 @@
 	CapiCallGivenToOtherApplication                 = 0x3304,
 } CAPI_REASON;
 
-#endif				/* __KERNEL__ */
-
 #endif				/* __KERNELCAPI_H__ */
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 37c5f726..d0b8458 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -1,57 +1,8 @@
 #ifndef LINUX_KEXEC_H
 #define LINUX_KEXEC_H
 
-/* kexec system call -  It loads the new kernel to boot into.
- * kexec does not sync, or unmount filesystems so if you need
- * that to happen you need to do that yourself.
- */
+#include <uapi/linux/kexec.h>
 
-#include <linux/types.h>
-
-/* kexec flags for different usage scenarios */
-#define KEXEC_ON_CRASH		0x00000001
-#define KEXEC_PRESERVE_CONTEXT	0x00000002
-#define KEXEC_ARCH_MASK		0xffff0000
-
-/* These values match the ELF architecture values.
- * Unless there is a good reason that should continue to be the case.
- */
-#define KEXEC_ARCH_DEFAULT ( 0 << 16)
-#define KEXEC_ARCH_386     ( 3 << 16)
-#define KEXEC_ARCH_X86_64  (62 << 16)
-#define KEXEC_ARCH_PPC     (20 << 16)
-#define KEXEC_ARCH_PPC64   (21 << 16)
-#define KEXEC_ARCH_IA_64   (50 << 16)
-#define KEXEC_ARCH_ARM     (40 << 16)
-#define KEXEC_ARCH_S390    (22 << 16)
-#define KEXEC_ARCH_SH      (42 << 16)
-#define KEXEC_ARCH_MIPS_LE (10 << 16)
-#define KEXEC_ARCH_MIPS    ( 8 << 16)
-
-/* The artificial cap on the number of segments passed to kexec_load. */
-#define KEXEC_SEGMENT_MAX 16
-
-#ifndef __KERNEL__
-/*
- * This structure is used to hold the arguments that are used when
- * loading  kernel binaries.
- */
-struct kexec_segment {
-	const void *buf;
-	size_t bufsz;
-	const void *mem;
-	size_t memsz;
-};
-
-/* Load a new kernel image as described by the kexec_segment array
- * consisting of passed number of segments at the entry-point address.
- * The flags allow different useage types.
- */
-extern int kexec_load(void *, size_t, struct kexec_segment *,
-		unsigned long int);
-#endif /* __KERNEL__ */
-
-#ifdef __KERNEL__
 #ifdef CONFIG_KEXEC
 #include <linux/list.h>
 #include <linux/linkage.h>
@@ -258,5 +209,4 @@
 static inline void crash_kexec(struct pt_regs *regs) { }
 static inline int kexec_should_crash(struct task_struct *p) { return 0; }
 #endif /* CONFIG_KEXEC */
-#endif /* __KERNEL__ */
 #endif /* LINUX_KEXEC_H */
diff --git a/include/linux/keyboard.h b/include/linux/keyboard.h
index 86e5214..131ed51 100644
--- a/include/linux/keyboard.h
+++ b/include/linux/keyboard.h
@@ -1,28 +1,8 @@
 #ifndef __LINUX_KEYBOARD_H
 #define __LINUX_KEYBOARD_H
 
-#include <linux/wait.h>
+#include <uapi/linux/keyboard.h>
 
-#define KG_SHIFT	0
-#define KG_CTRL		2
-#define KG_ALT		3
-#define KG_ALTGR	1
-#define KG_SHIFTL	4
-#define KG_KANASHIFT	4
-#define KG_SHIFTR	5
-#define KG_CTRLL	6
-#define KG_CTRLR	7
-#define KG_CAPSSHIFT	8
-
-#define NR_SHIFT	9
-
-#define NR_KEYS		256
-#define MAX_NR_KEYMAPS	256
-/* This means 128Kb if all keymaps are allocated. Only the superuser
-	may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */
-#define MAX_NR_OF_USER_KEYMAPS 256 	/* should be at least 7 */
-
-#ifdef __KERNEL__
 struct notifier_block;
 extern unsigned short *key_maps[MAX_NR_KEYMAPS];
 extern unsigned short plain_map[NR_KEYS];
@@ -38,422 +18,3 @@
 extern int register_keyboard_notifier(struct notifier_block *nb);
 extern int unregister_keyboard_notifier(struct notifier_block *nb);
 #endif
-
-#define MAX_NR_FUNC	256	/* max nr of strings assigned to keys */
-
-#define KT_LATIN	0	/* we depend on this being zero */
-#define KT_LETTER	11	/* symbol that can be acted upon by CapsLock */
-#define KT_FN		1
-#define KT_SPEC		2
-#define KT_PAD		3
-#define KT_DEAD		4
-#define KT_CONS		5
-#define KT_CUR		6
-#define KT_SHIFT	7
-#define KT_META		8
-#define KT_ASCII	9
-#define KT_LOCK		10
-#define KT_SLOCK	12
-#define KT_DEAD2	13
-#define KT_BRL		14
-
-#define K(t,v)		(((t)<<8)|(v))
-#define KTYP(x)		((x) >> 8)
-#define KVAL(x)		((x) & 0xff)
-
-#define K_F1		K(KT_FN,0)
-#define K_F2		K(KT_FN,1)
-#define K_F3		K(KT_FN,2)
-#define K_F4		K(KT_FN,3)
-#define K_F5		K(KT_FN,4)
-#define K_F6		K(KT_FN,5)
-#define K_F7		K(KT_FN,6)
-#define K_F8		K(KT_FN,7)
-#define K_F9		K(KT_FN,8)
-#define K_F10		K(KT_FN,9)
-#define K_F11		K(KT_FN,10)
-#define K_F12		K(KT_FN,11)
-#define K_F13		K(KT_FN,12)
-#define K_F14		K(KT_FN,13)
-#define K_F15		K(KT_FN,14)
-#define K_F16		K(KT_FN,15)
-#define K_F17		K(KT_FN,16)
-#define K_F18		K(KT_FN,17)
-#define K_F19		K(KT_FN,18)
-#define K_F20		K(KT_FN,19)
-#define K_FIND		K(KT_FN,20)
-#define K_INSERT	K(KT_FN,21)
-#define K_REMOVE	K(KT_FN,22)
-#define K_SELECT	K(KT_FN,23)
-#define K_PGUP		K(KT_FN,24) /* PGUP is a synonym for PRIOR */
-#define K_PGDN		K(KT_FN,25) /* PGDN is a synonym for NEXT */
-#define K_MACRO	 	K(KT_FN,26)
-#define K_HELP		K(KT_FN,27)
-#define K_DO		K(KT_FN,28)
-#define K_PAUSE	 	K(KT_FN,29)
-#define K_F21		K(KT_FN,30)
-#define K_F22		K(KT_FN,31)
-#define K_F23		K(KT_FN,32)
-#define K_F24		K(KT_FN,33)
-#define K_F25		K(KT_FN,34)
-#define K_F26		K(KT_FN,35)
-#define K_F27		K(KT_FN,36)
-#define K_F28		K(KT_FN,37)
-#define K_F29		K(KT_FN,38)
-#define K_F30		K(KT_FN,39)
-#define K_F31		K(KT_FN,40)
-#define K_F32		K(KT_FN,41)
-#define K_F33		K(KT_FN,42)
-#define K_F34		K(KT_FN,43)
-#define K_F35		K(KT_FN,44)
-#define K_F36		K(KT_FN,45)
-#define K_F37		K(KT_FN,46)
-#define K_F38		K(KT_FN,47)
-#define K_F39		K(KT_FN,48)
-#define K_F40		K(KT_FN,49)
-#define K_F41		K(KT_FN,50)
-#define K_F42		K(KT_FN,51)
-#define K_F43		K(KT_FN,52)
-#define K_F44		K(KT_FN,53)
-#define K_F45		K(KT_FN,54)
-#define K_F46		K(KT_FN,55)
-#define K_F47		K(KT_FN,56)
-#define K_F48		K(KT_FN,57)
-#define K_F49		K(KT_FN,58)
-#define K_F50		K(KT_FN,59)
-#define K_F51		K(KT_FN,60)
-#define K_F52		K(KT_FN,61)
-#define K_F53		K(KT_FN,62)
-#define K_F54		K(KT_FN,63)
-#define K_F55		K(KT_FN,64)
-#define K_F56		K(KT_FN,65)
-#define K_F57		K(KT_FN,66)
-#define K_F58		K(KT_FN,67)
-#define K_F59		K(KT_FN,68)
-#define K_F60		K(KT_FN,69)
-#define K_F61		K(KT_FN,70)
-#define K_F62		K(KT_FN,71)
-#define K_F63		K(KT_FN,72)
-#define K_F64		K(KT_FN,73)
-#define K_F65		K(KT_FN,74)
-#define K_F66		K(KT_FN,75)
-#define K_F67		K(KT_FN,76)
-#define K_F68		K(KT_FN,77)
-#define K_F69		K(KT_FN,78)
-#define K_F70		K(KT_FN,79)
-#define K_F71		K(KT_FN,80)
-#define K_F72		K(KT_FN,81)
-#define K_F73		K(KT_FN,82)
-#define K_F74		K(KT_FN,83)
-#define K_F75		K(KT_FN,84)
-#define K_F76		K(KT_FN,85)
-#define K_F77		K(KT_FN,86)
-#define K_F78		K(KT_FN,87)
-#define K_F79		K(KT_FN,88)
-#define K_F80		K(KT_FN,89)
-#define K_F81		K(KT_FN,90)
-#define K_F82		K(KT_FN,91)
-#define K_F83		K(KT_FN,92)
-#define K_F84		K(KT_FN,93)
-#define K_F85		K(KT_FN,94)
-#define K_F86		K(KT_FN,95)
-#define K_F87		K(KT_FN,96)
-#define K_F88		K(KT_FN,97)
-#define K_F89		K(KT_FN,98)
-#define K_F90		K(KT_FN,99)
-#define K_F91		K(KT_FN,100)
-#define K_F92		K(KT_FN,101)
-#define K_F93		K(KT_FN,102)
-#define K_F94		K(KT_FN,103)
-#define K_F95		K(KT_FN,104)
-#define K_F96		K(KT_FN,105)
-#define K_F97		K(KT_FN,106)
-#define K_F98		K(KT_FN,107)
-#define K_F99		K(KT_FN,108)
-#define K_F100		K(KT_FN,109)
-#define K_F101		K(KT_FN,110)
-#define K_F102		K(KT_FN,111)
-#define K_F103		K(KT_FN,112)
-#define K_F104		K(KT_FN,113)
-#define K_F105		K(KT_FN,114)
-#define K_F106		K(KT_FN,115)
-#define K_F107		K(KT_FN,116)
-#define K_F108		K(KT_FN,117)
-#define K_F109		K(KT_FN,118)
-#define K_F110		K(KT_FN,119)
-#define K_F111		K(KT_FN,120)
-#define K_F112		K(KT_FN,121)
-#define K_F113		K(KT_FN,122)
-#define K_F114		K(KT_FN,123)
-#define K_F115		K(KT_FN,124)
-#define K_F116		K(KT_FN,125)
-#define K_F117		K(KT_FN,126)
-#define K_F118		K(KT_FN,127)
-#define K_F119		K(KT_FN,128)
-#define K_F120		K(KT_FN,129)
-#define K_F121		K(KT_FN,130)
-#define K_F122		K(KT_FN,131)
-#define K_F123		K(KT_FN,132)
-#define K_F124		K(KT_FN,133)
-#define K_F125		K(KT_FN,134)
-#define K_F126		K(KT_FN,135)
-#define K_F127		K(KT_FN,136)
-#define K_F128		K(KT_FN,137)
-#define K_F129		K(KT_FN,138)
-#define K_F130		K(KT_FN,139)
-#define K_F131		K(KT_FN,140)
-#define K_F132		K(KT_FN,141)
-#define K_F133		K(KT_FN,142)
-#define K_F134		K(KT_FN,143)
-#define K_F135		K(KT_FN,144)
-#define K_F136		K(KT_FN,145)
-#define K_F137		K(KT_FN,146)
-#define K_F138		K(KT_FN,147)
-#define K_F139		K(KT_FN,148)
-#define K_F140		K(KT_FN,149)
-#define K_F141		K(KT_FN,150)
-#define K_F142		K(KT_FN,151)
-#define K_F143		K(KT_FN,152)
-#define K_F144		K(KT_FN,153)
-#define K_F145		K(KT_FN,154)
-#define K_F146		K(KT_FN,155)
-#define K_F147		K(KT_FN,156)
-#define K_F148		K(KT_FN,157)
-#define K_F149		K(KT_FN,158)
-#define K_F150		K(KT_FN,159)
-#define K_F151		K(KT_FN,160)
-#define K_F152		K(KT_FN,161)
-#define K_F153		K(KT_FN,162)
-#define K_F154		K(KT_FN,163)
-#define K_F155		K(KT_FN,164)
-#define K_F156		K(KT_FN,165)
-#define K_F157		K(KT_FN,166)
-#define K_F158		K(KT_FN,167)
-#define K_F159		K(KT_FN,168)
-#define K_F160		K(KT_FN,169)
-#define K_F161		K(KT_FN,170)
-#define K_F162		K(KT_FN,171)
-#define K_F163		K(KT_FN,172)
-#define K_F164		K(KT_FN,173)
-#define K_F165		K(KT_FN,174)
-#define K_F166		K(KT_FN,175)
-#define K_F167		K(KT_FN,176)
-#define K_F168		K(KT_FN,177)
-#define K_F169		K(KT_FN,178)
-#define K_F170		K(KT_FN,179)
-#define K_F171		K(KT_FN,180)
-#define K_F172		K(KT_FN,181)
-#define K_F173		K(KT_FN,182)
-#define K_F174		K(KT_FN,183)
-#define K_F175		K(KT_FN,184)
-#define K_F176		K(KT_FN,185)
-#define K_F177		K(KT_FN,186)
-#define K_F178		K(KT_FN,187)
-#define K_F179		K(KT_FN,188)
-#define K_F180		K(KT_FN,189)
-#define K_F181		K(KT_FN,190)
-#define K_F182		K(KT_FN,191)
-#define K_F183		K(KT_FN,192)
-#define K_F184		K(KT_FN,193)
-#define K_F185		K(KT_FN,194)
-#define K_F186		K(KT_FN,195)
-#define K_F187		K(KT_FN,196)
-#define K_F188		K(KT_FN,197)
-#define K_F189		K(KT_FN,198)
-#define K_F190		K(KT_FN,199)
-#define K_F191		K(KT_FN,200)
-#define K_F192		K(KT_FN,201)
-#define K_F193		K(KT_FN,202)
-#define K_F194		K(KT_FN,203)
-#define K_F195		K(KT_FN,204)
-#define K_F196		K(KT_FN,205)
-#define K_F197		K(KT_FN,206)
-#define K_F198		K(KT_FN,207)
-#define K_F199		K(KT_FN,208)
-#define K_F200		K(KT_FN,209)
-#define K_F201		K(KT_FN,210)
-#define K_F202		K(KT_FN,211)
-#define K_F203		K(KT_FN,212)
-#define K_F204		K(KT_FN,213)
-#define K_F205		K(KT_FN,214)
-#define K_F206		K(KT_FN,215)
-#define K_F207		K(KT_FN,216)
-#define K_F208		K(KT_FN,217)
-#define K_F209		K(KT_FN,218)
-#define K_F210		K(KT_FN,219)
-#define K_F211		K(KT_FN,220)
-#define K_F212		K(KT_FN,221)
-#define K_F213		K(KT_FN,222)
-#define K_F214		K(KT_FN,223)
-#define K_F215		K(KT_FN,224)
-#define K_F216		K(KT_FN,225)
-#define K_F217		K(KT_FN,226)
-#define K_F218		K(KT_FN,227)
-#define K_F219		K(KT_FN,228)
-#define K_F220		K(KT_FN,229)
-#define K_F221		K(KT_FN,230)
-#define K_F222		K(KT_FN,231)
-#define K_F223		K(KT_FN,232)
-#define K_F224		K(KT_FN,233)
-#define K_F225		K(KT_FN,234)
-#define K_F226		K(KT_FN,235)
-#define K_F227		K(KT_FN,236)
-#define K_F228		K(KT_FN,237)
-#define K_F229		K(KT_FN,238)
-#define K_F230		K(KT_FN,239)
-#define K_F231		K(KT_FN,240)
-#define K_F232		K(KT_FN,241)
-#define K_F233		K(KT_FN,242)
-#define K_F234		K(KT_FN,243)
-#define K_F235		K(KT_FN,244)
-#define K_F236		K(KT_FN,245)
-#define K_F237		K(KT_FN,246)
-#define K_F238		K(KT_FN,247)
-#define K_F239		K(KT_FN,248)
-#define K_F240		K(KT_FN,249)
-#define K_F241		K(KT_FN,250)
-#define K_F242		K(KT_FN,251)
-#define K_F243		K(KT_FN,252)
-#define K_F244		K(KT_FN,253)
-#define K_F245		K(KT_FN,254)
-#define K_UNDO		K(KT_FN,255)
-
-
-#define K_HOLE		K(KT_SPEC,0)
-#define K_ENTER		K(KT_SPEC,1)
-#define K_SH_REGS	K(KT_SPEC,2)
-#define K_SH_MEM	K(KT_SPEC,3)
-#define K_SH_STAT	K(KT_SPEC,4)
-#define K_BREAK		K(KT_SPEC,5)
-#define K_CONS		K(KT_SPEC,6)
-#define K_CAPS		K(KT_SPEC,7)
-#define K_NUM		K(KT_SPEC,8)
-#define K_HOLD		K(KT_SPEC,9)
-#define K_SCROLLFORW	K(KT_SPEC,10)
-#define K_SCROLLBACK	K(KT_SPEC,11)
-#define K_BOOT		K(KT_SPEC,12)
-#define K_CAPSON	K(KT_SPEC,13)
-#define K_COMPOSE	K(KT_SPEC,14)
-#define K_SAK		K(KT_SPEC,15)
-#define K_DECRCONSOLE	K(KT_SPEC,16)
-#define K_INCRCONSOLE	K(KT_SPEC,17)
-#define K_SPAWNCONSOLE	K(KT_SPEC,18)
-#define K_BARENUMLOCK	K(KT_SPEC,19)
-
-#define K_ALLOCATED	K(KT_SPEC,126) /* dynamically allocated keymap */
-#define K_NOSUCHMAP	K(KT_SPEC,127) /* returned by KDGKBENT */
-
-#define K_P0		K(KT_PAD,0)
-#define K_P1		K(KT_PAD,1)
-#define K_P2		K(KT_PAD,2)
-#define K_P3		K(KT_PAD,3)
-#define K_P4		K(KT_PAD,4)
-#define K_P5		K(KT_PAD,5)
-#define K_P6		K(KT_PAD,6)
-#define K_P7		K(KT_PAD,7)
-#define K_P8		K(KT_PAD,8)
-#define K_P9		K(KT_PAD,9)
-#define K_PPLUS		K(KT_PAD,10)	/* key-pad plus */
-#define K_PMINUS	K(KT_PAD,11)	/* key-pad minus */
-#define K_PSTAR		K(KT_PAD,12)	/* key-pad asterisk (star) */
-#define K_PSLASH	K(KT_PAD,13)	/* key-pad slash */
-#define K_PENTER	K(KT_PAD,14)	/* key-pad enter */
-#define K_PCOMMA	K(KT_PAD,15)	/* key-pad comma: kludge... */
-#define K_PDOT		K(KT_PAD,16)	/* key-pad dot (period): kludge... */
-#define K_PPLUSMINUS	K(KT_PAD,17)	/* key-pad plus/minus */
-#define K_PPARENL	K(KT_PAD,18)	/* key-pad left parenthesis */
-#define K_PPARENR	K(KT_PAD,19)	/* key-pad right parenthesis */
-
-#define NR_PAD		20
-
-#define K_DGRAVE	K(KT_DEAD,0)
-#define K_DACUTE	K(KT_DEAD,1)
-#define K_DCIRCM	K(KT_DEAD,2)
-#define K_DTILDE	K(KT_DEAD,3)
-#define K_DDIERE	K(KT_DEAD,4)
-#define K_DCEDIL	K(KT_DEAD,5)
-
-#define NR_DEAD		6
-
-#define K_DOWN		K(KT_CUR,0)
-#define K_LEFT		K(KT_CUR,1)
-#define K_RIGHT		K(KT_CUR,2)
-#define K_UP		K(KT_CUR,3)
-
-#define K_SHIFT		K(KT_SHIFT,KG_SHIFT)
-#define K_CTRL		K(KT_SHIFT,KG_CTRL)
-#define K_ALT		K(KT_SHIFT,KG_ALT)
-#define K_ALTGR		K(KT_SHIFT,KG_ALTGR)
-#define K_SHIFTL	K(KT_SHIFT,KG_SHIFTL)
-#define K_SHIFTR	K(KT_SHIFT,KG_SHIFTR)
-#define K_CTRLL	 	K(KT_SHIFT,KG_CTRLL)
-#define K_CTRLR	 	K(KT_SHIFT,KG_CTRLR)
-#define K_CAPSSHIFT	K(KT_SHIFT,KG_CAPSSHIFT)
-
-#define K_ASC0		K(KT_ASCII,0)
-#define K_ASC1		K(KT_ASCII,1)
-#define K_ASC2		K(KT_ASCII,2)
-#define K_ASC3		K(KT_ASCII,3)
-#define K_ASC4		K(KT_ASCII,4)
-#define K_ASC5		K(KT_ASCII,5)
-#define K_ASC6		K(KT_ASCII,6)
-#define K_ASC7		K(KT_ASCII,7)
-#define K_ASC8		K(KT_ASCII,8)
-#define K_ASC9		K(KT_ASCII,9)
-#define K_HEX0		K(KT_ASCII,10)
-#define K_HEX1		K(KT_ASCII,11)
-#define K_HEX2		K(KT_ASCII,12)
-#define K_HEX3		K(KT_ASCII,13)
-#define K_HEX4		K(KT_ASCII,14)
-#define K_HEX5		K(KT_ASCII,15)
-#define K_HEX6		K(KT_ASCII,16)
-#define K_HEX7		K(KT_ASCII,17)
-#define K_HEX8		K(KT_ASCII,18)
-#define K_HEX9		K(KT_ASCII,19)
-#define K_HEXa		K(KT_ASCII,20)
-#define K_HEXb		K(KT_ASCII,21)
-#define K_HEXc		K(KT_ASCII,22)
-#define K_HEXd		K(KT_ASCII,23)
-#define K_HEXe		K(KT_ASCII,24)
-#define K_HEXf		K(KT_ASCII,25)
-
-#define NR_ASCII	26
-
-#define K_SHIFTLOCK	K(KT_LOCK,KG_SHIFT)
-#define K_CTRLLOCK	K(KT_LOCK,KG_CTRL)
-#define K_ALTLOCK	K(KT_LOCK,KG_ALT)
-#define K_ALTGRLOCK	K(KT_LOCK,KG_ALTGR)
-#define K_SHIFTLLOCK	K(KT_LOCK,KG_SHIFTL)
-#define K_SHIFTRLOCK	K(KT_LOCK,KG_SHIFTR)
-#define K_CTRLLLOCK	K(KT_LOCK,KG_CTRLL)
-#define K_CTRLRLOCK	K(KT_LOCK,KG_CTRLR)
-#define K_CAPSSHIFTLOCK	K(KT_LOCK,KG_CAPSSHIFT)
-
-#define K_SHIFT_SLOCK	K(KT_SLOCK,KG_SHIFT)
-#define K_CTRL_SLOCK	K(KT_SLOCK,KG_CTRL)
-#define K_ALT_SLOCK	K(KT_SLOCK,KG_ALT)
-#define K_ALTGR_SLOCK	K(KT_SLOCK,KG_ALTGR)
-#define K_SHIFTL_SLOCK	K(KT_SLOCK,KG_SHIFTL)
-#define K_SHIFTR_SLOCK	K(KT_SLOCK,KG_SHIFTR)
-#define K_CTRLL_SLOCK	K(KT_SLOCK,KG_CTRLL)
-#define K_CTRLR_SLOCK	K(KT_SLOCK,KG_CTRLR)
-#define K_CAPSSHIFT_SLOCK	K(KT_SLOCK,KG_CAPSSHIFT)
-
-#define NR_LOCK		9
-
-#define K_BRL_BLANK     K(KT_BRL, 0)
-#define K_BRL_DOT1      K(KT_BRL, 1)
-#define K_BRL_DOT2      K(KT_BRL, 2)
-#define K_BRL_DOT3      K(KT_BRL, 3)
-#define K_BRL_DOT4      K(KT_BRL, 4)
-#define K_BRL_DOT5      K(KT_BRL, 5)
-#define K_BRL_DOT6      K(KT_BRL, 6)
-#define K_BRL_DOT7      K(KT_BRL, 7)
-#define K_BRL_DOT8      K(KT_BRL, 8)
-#define K_BRL_DOT9      K(KT_BRL, 9)
-#define K_BRL_DOT10     K(KT_BRL, 10)
-
-#define NR_BRL		11
-
-#define MAX_DIACR	256
-#endif
diff --git a/include/linux/kvm_para.h b/include/linux/kvm_para.h
index ff476dd..00a97bb 100644
--- a/include/linux/kvm_para.h
+++ b/include/linux/kvm_para.h
@@ -1,31 +1,8 @@
 #ifndef __LINUX_KVM_PARA_H
 #define __LINUX_KVM_PARA_H
 
-/*
- * This header file provides a method for making a hypercall to the host
- * Architectures should define:
- * - kvm_hypercall0, kvm_hypercall1...
- * - kvm_arch_para_features
- * - kvm_para_available
- */
+#include <uapi/linux/kvm_para.h>
 
-/* Return values for hypercalls */
-#define KVM_ENOSYS		1000
-#define KVM_EFAULT		EFAULT
-#define KVM_E2BIG		E2BIG
-#define KVM_EPERM		EPERM
-
-#define KVM_HC_VAPIC_POLL_IRQ		1
-#define KVM_HC_MMU_OP			2
-#define KVM_HC_FEATURES			3
-#define KVM_HC_PPC_MAP_MAGIC_PAGE	4
-
-/*
- * hypercalls use architecture specific
- */
-#include <asm/kvm_para.h>
-
-#ifdef __KERNEL__
 
 static inline int kvm_para_has_feature(unsigned int feature)
 {
@@ -33,5 +10,4 @@
 		return 1;
 	return 0;
 }
-#endif /* __KERNEL__ */
 #endif /* __LINUX_KVM_PARA_H */
diff --git a/include/linux/l2tp.h b/include/linux/l2tp.h
index 7eab668..bffdb96 100644
--- a/include/linux/l2tp.h
+++ b/include/linux/l2tp.h
@@ -3,181 +3,11 @@
  *
  * Author: James Chapman <jchapman@katalix.com>
  */
-
 #ifndef _LINUX_L2TP_H_
 #define _LINUX_L2TP_H_
 
-#include <linux/types.h>
-#include <linux/socket.h>
-#ifdef __KERNEL__
 #include <linux/in.h>
 #include <linux/in6.h>
-#else
-#include <netinet/in.h>
-#endif
-
-#define IPPROTO_L2TP		115
-
-/**
- * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets
- * @l2tp_family:  address family number AF_L2TPIP.
- * @l2tp_addr:    protocol specific address information
- * @l2tp_conn_id: connection id of tunnel
- */
-#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
-struct sockaddr_l2tpip {
-	/* The first fields must match struct sockaddr_in */
-	__kernel_sa_family_t l2tp_family; /* AF_INET */
-	__be16		l2tp_unused;	/* INET port number (unused) */
-	struct in_addr	l2tp_addr;	/* Internet address */
-
-	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
-
-	/* Pad to size of `struct sockaddr'. */
-	unsigned char	__pad[sizeof(struct sockaddr) -
-			      sizeof(__kernel_sa_family_t) -
-			      sizeof(__be16) - sizeof(struct in_addr) -
-			      sizeof(__u32)];
-};
-
-/**
- * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets
- * @l2tp_family:  address family number AF_L2TPIP.
- * @l2tp_addr:    protocol specific address information
- * @l2tp_conn_id: connection id of tunnel
- */
-struct sockaddr_l2tpip6 {
-	/* The first fields must match struct sockaddr_in6 */
-	__kernel_sa_family_t l2tp_family; /* AF_INET6 */
-	__be16		l2tp_unused;	/* INET port number (unused) */
-	__be32		l2tp_flowinfo;	/* IPv6 flow information */
-	struct in6_addr	l2tp_addr;	/* IPv6 address */
-	__u32		l2tp_scope_id;	/* scope id (new in RFC2553) */
-	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
-};
-
-/*****************************************************************************
- *  NETLINK_GENERIC netlink family.
- *****************************************************************************/
-
-/*
- * Commands.
- * Valid TLVs of each command are:-
- * TUNNEL_CREATE	- CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid
- * TUNNEL_DELETE	- CONN_ID
- * TUNNEL_MODIFY	- CONN_ID, udpcsum
- * TUNNEL_GETSTATS	- CONN_ID, (stats)
- * TUNNEL_GET		- CONN_ID, (...)
- * SESSION_CREATE	- SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec
- * SESSION_DELETE	- SESSION_ID
- * SESSION_MODIFY	- SESSION_ID, data_seq
- * SESSION_GET		- SESSION_ID, (...)
- * SESSION_GETSTATS	- SESSION_ID, (stats)
- *
- */
-enum {
-	L2TP_CMD_NOOP,
-	L2TP_CMD_TUNNEL_CREATE,
-	L2TP_CMD_TUNNEL_DELETE,
-	L2TP_CMD_TUNNEL_MODIFY,
-	L2TP_CMD_TUNNEL_GET,
-	L2TP_CMD_SESSION_CREATE,
-	L2TP_CMD_SESSION_DELETE,
-	L2TP_CMD_SESSION_MODIFY,
-	L2TP_CMD_SESSION_GET,
-	__L2TP_CMD_MAX,
-};
-
-#define L2TP_CMD_MAX			(__L2TP_CMD_MAX - 1)
-
-/*
- * ATTR types defined for L2TP
- */
-enum {
-	L2TP_ATTR_NONE,			/* no data */
-	L2TP_ATTR_PW_TYPE,		/* u16, enum l2tp_pwtype */
-	L2TP_ATTR_ENCAP_TYPE,		/* u16, enum l2tp_encap_type */
-	L2TP_ATTR_OFFSET,		/* u16 */
-	L2TP_ATTR_DATA_SEQ,		/* u16 */
-	L2TP_ATTR_L2SPEC_TYPE,		/* u8, enum l2tp_l2spec_type */
-	L2TP_ATTR_L2SPEC_LEN,		/* u8, enum l2tp_l2spec_type */
-	L2TP_ATTR_PROTO_VERSION,	/* u8 */
-	L2TP_ATTR_IFNAME,		/* string */
-	L2TP_ATTR_CONN_ID,		/* u32 */
-	L2TP_ATTR_PEER_CONN_ID,		/* u32 */
-	L2TP_ATTR_SESSION_ID,		/* u32 */
-	L2TP_ATTR_PEER_SESSION_ID,	/* u32 */
-	L2TP_ATTR_UDP_CSUM,		/* u8 */
-	L2TP_ATTR_VLAN_ID,		/* u16 */
-	L2TP_ATTR_COOKIE,		/* 0, 4 or 8 bytes */
-	L2TP_ATTR_PEER_COOKIE,		/* 0, 4 or 8 bytes */
-	L2TP_ATTR_DEBUG,		/* u32 */
-	L2TP_ATTR_RECV_SEQ,		/* u8 */
-	L2TP_ATTR_SEND_SEQ,		/* u8 */
-	L2TP_ATTR_LNS_MODE,		/* u8 */
-	L2TP_ATTR_USING_IPSEC,		/* u8 */
-	L2TP_ATTR_RECV_TIMEOUT,		/* msec */
-	L2TP_ATTR_FD,			/* int */
-	L2TP_ATTR_IP_SADDR,		/* u32 */
-	L2TP_ATTR_IP_DADDR,		/* u32 */
-	L2TP_ATTR_UDP_SPORT,		/* u16 */
-	L2TP_ATTR_UDP_DPORT,		/* u16 */
-	L2TP_ATTR_MTU,			/* u16 */
-	L2TP_ATTR_MRU,			/* u16 */
-	L2TP_ATTR_STATS,		/* nested */
-	L2TP_ATTR_IP6_SADDR,		/* struct in6_addr */
-	L2TP_ATTR_IP6_DADDR,		/* struct in6_addr */
-	__L2TP_ATTR_MAX,
-};
-
-#define L2TP_ATTR_MAX			(__L2TP_ATTR_MAX - 1)
-
-/* Nested in L2TP_ATTR_STATS */
-enum {
-	L2TP_ATTR_STATS_NONE,		/* no data */
-	L2TP_ATTR_TX_PACKETS,		/* u64 */
-	L2TP_ATTR_TX_BYTES,		/* u64 */
-	L2TP_ATTR_TX_ERRORS,		/* u64 */
-	L2TP_ATTR_RX_PACKETS,		/* u64 */
-	L2TP_ATTR_RX_BYTES,		/* u64 */
-	L2TP_ATTR_RX_SEQ_DISCARDS,	/* u64 */
-	L2TP_ATTR_RX_OOS_PACKETS,	/* u64 */
-	L2TP_ATTR_RX_ERRORS,		/* u64 */
-	__L2TP_ATTR_STATS_MAX,
-};
-
-#define L2TP_ATTR_STATS_MAX		(__L2TP_ATTR_STATS_MAX - 1)
-
-enum l2tp_pwtype {
-	L2TP_PWTYPE_NONE = 0x0000,
-	L2TP_PWTYPE_ETH_VLAN = 0x0004,
-	L2TP_PWTYPE_ETH = 0x0005,
-	L2TP_PWTYPE_PPP = 0x0007,
-	L2TP_PWTYPE_PPP_AC = 0x0008,
-	L2TP_PWTYPE_IP = 0x000b,
-	__L2TP_PWTYPE_MAX
-};
-
-enum l2tp_l2spec_type {
-	L2TP_L2SPECTYPE_NONE,
-	L2TP_L2SPECTYPE_DEFAULT,
-};
-
-enum l2tp_encap_type {
-	L2TP_ENCAPTYPE_UDP,
-	L2TP_ENCAPTYPE_IP,
-};
-
-enum l2tp_seqmode {
-	L2TP_SEQ_NONE = 0,
-	L2TP_SEQ_IP = 1,
-	L2TP_SEQ_ALL = 2,
-};
-
-/*
- * NETLINK_GENERIC related info
- */
-#define L2TP_GENL_NAME		"l2tp"
-#define L2TP_GENL_VERSION	0x1
+#include <uapi/linux/l2tp.h>
 
 #endif
diff --git a/include/linux/llc.h b/include/linux/llc.h
index a2418ae..b965314 100644
--- a/include/linux/llc.h
+++ b/include/linux/llc.h
@@ -1,5 +1,3 @@
-#ifndef __LINUX_LLC_H
-#define __LINUX_LLC_H
 /*
  * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators.
  *
@@ -12,80 +10,14 @@
  *
  * See the GNU General Public License for more details.
  */
+#ifndef __LINUX_LLC_H
+#define __LINUX_LLC_H
 
-#include <linux/socket.h>
+#include <uapi/linux/llc.h>
 
-#define __LLC_SOCK_SIZE__ 16	/* sizeof(sockaddr_llc), word align. */
-struct sockaddr_llc {
-	__kernel_sa_family_t sllc_family; /* AF_LLC */
-	__kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */
-	unsigned char   sllc_test;
-	unsigned char   sllc_xid;
-	unsigned char	sllc_ua;	/* UA data, only for SOCK_STREAM. */
-	unsigned char   sllc_sap;
-	unsigned char   sllc_mac[IFHWADDRLEN];
-	unsigned char   __pad[__LLC_SOCK_SIZE__ -
-			      sizeof(__kernel_sa_family_t) * 2 -
-			      sizeof(unsigned char) * 4 - IFHWADDRLEN];
-};
-
-/* sockopt definitions. */
-enum llc_sockopts {
-	LLC_OPT_UNKNOWN = 0,
-	LLC_OPT_RETRY,		/* max retrans attempts. */
-	LLC_OPT_SIZE,		/* max PDU size (octets). */
-	LLC_OPT_ACK_TMR_EXP,	/* ack expire time (secs). */
-	LLC_OPT_P_TMR_EXP,	/* pf cycle expire time (secs). */
-	LLC_OPT_REJ_TMR_EXP,	/* rej sent expire time (secs). */
-	LLC_OPT_BUSY_TMR_EXP,	/* busy state expire time (secs). */
-	LLC_OPT_TX_WIN,		/* tx window size. */
-	LLC_OPT_RX_WIN,		/* rx window size. */
-	LLC_OPT_PKTINFO,	/* ancillary packet information. */
-	LLC_OPT_MAX
-};
-
-#define LLC_OPT_MAX_RETRY	 100
-#define LLC_OPT_MAX_SIZE	4196
-#define LLC_OPT_MAX_WIN		 127
-#define LLC_OPT_MAX_ACK_TMR_EXP	  60
-#define LLC_OPT_MAX_P_TMR_EXP	  60
-#define LLC_OPT_MAX_REJ_TMR_EXP	  60
-#define LLC_OPT_MAX_BUSY_TMR_EXP  60
-
-/* LLC SAP types. */
-#define LLC_SAP_NULL	0x00		/* NULL SAP. 			*/
-#define LLC_SAP_LLC	0x02		/* LLC Sublayer Management. 	*/
-#define LLC_SAP_SNA	0x04		/* SNA Path Control. 		*/
-#define LLC_SAP_PNM	0x0E		/* Proway Network Management.	*/	
-#define LLC_SAP_IP	0x06		/* TCP/IP. 			*/
-#define LLC_SAP_BSPAN	0x42		/* Bridge Spanning Tree Proto	*/
-#define LLC_SAP_MMS	0x4E		/* Manufacturing Message Srv.	*/
-#define LLC_SAP_8208	0x7E		/* ISO 8208			*/
-#define LLC_SAP_3COM	0x80		/* 3COM. 			*/
-#define LLC_SAP_PRO	0x8E		/* Proway Active Station List	*/
-#define LLC_SAP_SNAP	0xAA		/* SNAP. 			*/
-#define LLC_SAP_BANYAN	0xBC		/* Banyan. 			*/
-#define LLC_SAP_IPX	0xE0		/* IPX/SPX. 			*/
-#define LLC_SAP_NETBEUI	0xF0		/* NetBEUI. 			*/
-#define LLC_SAP_LANMGR	0xF4		/* LanManager. 			*/
-#define LLC_SAP_IMPL	0xF8		/* IMPL				*/
-#define LLC_SAP_DISC	0xFC		/* Discovery			*/
-#define LLC_SAP_OSI	0xFE		/* OSI Network Layers. 		*/
-#define LLC_SAP_LAR	0xDC		/* LAN Address Resolution 	*/
-#define LLC_SAP_RM	0xD4		/* Resource Management 		*/
-#define LLC_SAP_GLOBAL	0xFF		/* Global SAP. 			*/
-
-struct llc_pktinfo {
-	int lpi_ifindex;
-	unsigned char lpi_sap;
-	unsigned char lpi_mac[IFHWADDRLEN];
-};
-
-#ifdef __KERNEL__
 #define LLC_SAP_DYN_START	0xC0
 #define LLC_SAP_DYN_STOP	0xDE
 #define LLC_SAP_DYN_TRIES	4
 
 #define llc_ui_skb_cb(__skb) ((struct sockaddr_llc *)&((__skb)->cb[0]))
-#endif /* __KERNEL__ */
 #endif /* __LINUX_LLC_H */
diff --git a/include/linux/loop.h b/include/linux/loop.h
index 9635116..6492181 100644
--- a/include/linux/loop.h
+++ b/include/linux/loop.h
@@ -1,6 +1,3 @@
-#ifndef _LINUX_LOOP_H
-#define _LINUX_LOOP_H
-
 /*
  * include/linux/loop.h
  *
@@ -9,15 +6,14 @@
  * Copyright 1993 by Theodore Ts'o.  Redistribution of this file is
  * permitted under the GNU General Public License.
  */
+#ifndef _LINUX_LOOP_H
+#define _LINUX_LOOP_H
 
-#define LO_NAME_SIZE	64
-#define LO_KEY_SIZE	32
-
-#ifdef __KERNEL__
 #include <linux/bio.h>
 #include <linux/blkdev.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
+#include <uapi/linux/loop.h>
 
 /* Possible states of device */
 enum {
@@ -66,69 +62,6 @@
 	struct gendisk		*lo_disk;
 };
 
-#endif /* __KERNEL__ */
-
-/*
- * Loop flags
- */
-enum {
-	LO_FLAGS_READ_ONLY	= 1,
-	LO_FLAGS_AUTOCLEAR	= 4,
-	LO_FLAGS_PARTSCAN	= 8,
-};
-
-#include <asm/posix_types.h>	/* for __kernel_old_dev_t */
-#include <linux/types.h>	/* for __u64 */
-
-/* Backwards compatibility version */
-struct loop_info {
-	int		   lo_number;		/* ioctl r/o */
-	__kernel_old_dev_t lo_device; 		/* ioctl r/o */
-	unsigned long	   lo_inode; 		/* ioctl r/o */
-	__kernel_old_dev_t lo_rdevice; 		/* ioctl r/o */
-	int		   lo_offset;
-	int		   lo_encrypt_type;
-	int		   lo_encrypt_key_size; 	/* ioctl w/o */
-	int		   lo_flags;			/* ioctl r/o */
-	char		   lo_name[LO_NAME_SIZE];
-	unsigned char	   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
-	unsigned long	   lo_init[2];
-	char		   reserved[4];
-};
-
-struct loop_info64 {
-	__u64		   lo_device;			/* ioctl r/o */
-	__u64		   lo_inode;			/* ioctl r/o */
-	__u64		   lo_rdevice;			/* ioctl r/o */
-	__u64		   lo_offset;
-	__u64		   lo_sizelimit;/* bytes, 0 == max available */
-	__u32		   lo_number;			/* ioctl r/o */
-	__u32		   lo_encrypt_type;
-	__u32		   lo_encrypt_key_size;		/* ioctl w/o */
-	__u32		   lo_flags;			/* ioctl r/o */
-	__u8		   lo_file_name[LO_NAME_SIZE];
-	__u8		   lo_crypt_name[LO_NAME_SIZE];
-	__u8		   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
-	__u64		   lo_init[2];
-};
-
-/*
- * Loop filter types
- */
-
-#define LO_CRYPT_NONE		0
-#define LO_CRYPT_XOR		1
-#define LO_CRYPT_DES		2
-#define LO_CRYPT_FISH2		3    /* Twofish encryption */
-#define LO_CRYPT_BLOW		4
-#define LO_CRYPT_CAST128	5
-#define LO_CRYPT_IDEA		6
-#define LO_CRYPT_DUMMY		9
-#define LO_CRYPT_SKIPJACK	10
-#define LO_CRYPT_CRYPTOAPI	18
-#define MAX_LO_CRYPT		20
-
-#ifdef __KERNEL__
 /* Support for loadable transfer modules */
 struct loop_func_table {
 	int number;	/* filter type */ 
@@ -147,21 +80,3 @@
 int loop_unregister_transfer(int number); 
 
 #endif
-/*
- * IOCTL commands --- we will commandeer 0x4C ('L')
- */
-
-#define LOOP_SET_FD		0x4C00
-#define LOOP_CLR_FD		0x4C01
-#define LOOP_SET_STATUS		0x4C02
-#define LOOP_GET_STATUS		0x4C03
-#define LOOP_SET_STATUS64	0x4C04
-#define LOOP_GET_STATUS64	0x4C05
-#define LOOP_CHANGE_FD		0x4C06
-#define LOOP_SET_CAPACITY	0x4C07
-
-/* /dev/loop-control interface */
-#define LOOP_CTL_ADD		0x4C80
-#define LOOP_CTL_REMOVE		0x4C81
-#define LOOP_CTL_GET_FREE	0x4C82
-#endif
diff --git a/include/linux/lp.h b/include/linux/lp.h
index 0df024b..0dd276a 100644
--- a/include/linux/lp.h
+++ b/include/linux/lp.h
@@ -1,105 +1,16 @@
-#ifndef _LINUX_LP_H
-#define _LINUX_LP_H
-
 /*
  * usr/include/linux/lp.h c.1991-1992 James Wiegand
  * many modifications copyright (C) 1992 Michael K. Johnson
  * Interrupt support added 1993 Nigel Gamble
  * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti 
  */
+#ifndef _LINUX_LP_H
+#define _LINUX_LP_H
 
-/*
- * Per POSIX guidelines, this module reserves the LP and lp prefixes
- * These are the lp_table[minor].flags flags...
- */
-#define LP_EXIST 0x0001
-#define LP_SELEC 0x0002
-#define LP_BUSY	 0x0004
-#define LP_BUSY_BIT_POS 2
-#define LP_OFFL	 0x0008
-#define LP_NOPA  0x0010
-#define LP_ERR   0x0020
-#define LP_ABORT 0x0040
-#define LP_CAREFUL 0x0080 /* obsoleted -arca */
-#define LP_ABORTOPEN 0x0100
-
-#define LP_TRUST_IRQ_  0x0200 /* obsolete */
-#define LP_NO_REVERSE  0x0400 /* No reverse mode available. */
-#define LP_DATA_AVAIL  0x0800 /* Data is available. */
-
-/* 
- * bit defines for 8255 status port
- * base + 1
- * accessed with LP_S(minor), which gets the byte...
- */
-#define LP_PBUSY	0x80  /* inverted input, active high */
-#define LP_PACK		0x40  /* unchanged input, active low */
-#define LP_POUTPA	0x20  /* unchanged input, active high */
-#define LP_PSELECD	0x10  /* unchanged input, active high */
-#define LP_PERRORP	0x08  /* unchanged input, active low */
-
-/* timeout for each character.  This is relative to bus cycles -- it
- * is the count in a busy loop.  THIS IS THE VALUE TO CHANGE if you
- * have extremely slow printing, or if the machine seems to slow down
- * a lot when you print.  If you have slow printing, increase this
- * number and recompile, and if your system gets bogged down, decrease
- * this number.  This can be changed with the tunelp(8) command as well.
- */
-
-#define LP_INIT_CHAR 1000
-
-/* The parallel port specs apparently say that there needs to be
- * a .5usec wait before and after the strobe.
- */
-
-#define LP_INIT_WAIT 1
-
-/* This is the amount of time that the driver waits for the printer to
- * catch up when the printer's buffer appears to be filled.  If you
- * want to tune this and have a fast printer (i.e. HPIIIP), decrease
- * this number, and if you have a slow printer, increase this number.
- * This is in hundredths of a second, the default 2 being .05 second.
- * Or use the tunelp(8) command, which is especially nice if you want
- * change back and forth between character and graphics printing, which
- * are wildly different...
- */
-
-#define LP_INIT_TIME 2
-
-/* IOCTL numbers */
-#define LPCHAR   0x0601  /* corresponds to LP_INIT_CHAR */
-#define LPTIME   0x0602  /* corresponds to LP_INIT_TIME */
-#define LPABORT  0x0604  /* call with TRUE arg to abort on error,
-			    FALSE to retry.  Default is retry.  */
-#define LPSETIRQ 0x0605  /* call with new IRQ number,
-			    or 0 for polling (no IRQ) */
-#define LPGETIRQ 0x0606  /* get the current IRQ number */
-#define LPWAIT   0x0608  /* corresponds to LP_INIT_WAIT */
-/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
-#define LPCAREFUL   0x0609  /* call with TRUE arg to require out-of-paper, off-
-			    line, and error indicators good on all writes,
-			    FALSE to ignore them.  Default is ignore. */
-#define LPABORTOPEN 0x060a  /* call with TRUE arg to abort open() on error,
-			    FALSE to ignore error.  Default is ignore.  */
-#define LPGETSTATUS 0x060b  /* return LP_S(minor) */
-#define LPRESET     0x060c  /* reset printer */
-#ifdef LP_STATS
-#define LPGETSTATS  0x060d  /* get statistics (struct lp_stats) */
-#endif
-#define LPGETFLAGS  0x060e  /* get status flags */
-#define LPSETTIMEOUT 0x060f /* set parport timeout */
-
-/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
-   This is also used for re-checking error conditions if LP_ABORT is
-   not set.  This is the default behavior. */
-
-#define LP_TIMEOUT_INTERRUPT	(60 * HZ)
-#define LP_TIMEOUT_POLLED	(10 * HZ)
-
-#ifdef __KERNEL__
 
 #include <linux/wait.h>
 #include <linux/mutex.h>
+#include <uapi/linux/lp.h>
 
 /* Magic numbers for defining port-device mappings */
 #define LP_PARPORT_UNSPEC -4
@@ -187,5 +98,3 @@
 #define LP_DELAY 	50
 
 #endif
-
-#endif
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index 6c40684..3d15c83 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -6,295 +6,11 @@
  * under the terms of the GNU General Public License version 2 as published
  * by the Free Software Foundation, incorporated herein by reference.
  */
-
 #ifndef __LINUX_MDIO_H__
 #define __LINUX_MDIO_H__
 
-#include <linux/types.h>
-#include <linux/mii.h>
+#include <uapi/linux/mdio.h>
 
-/* MDIO Manageable Devices (MMDs). */
-#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
-					 * Physical Medium Dependent */
-#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
-#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
-#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
-#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
-#define MDIO_MMD_TC		6	/* Transmission Convergence */
-#define MDIO_MMD_AN		7	/* Auto-Negotiation */
-#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
-#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
-#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
-
-/* Generic MDIO registers. */
-#define MDIO_CTRL1		MII_BMCR
-#define MDIO_STAT1		MII_BMSR
-#define MDIO_DEVID1		MII_PHYSID1
-#define MDIO_DEVID2		MII_PHYSID2
-#define MDIO_SPEED		4	/* Speed ability */
-#define MDIO_DEVS1		5	/* Devices in package */
-#define MDIO_DEVS2		6
-#define MDIO_CTRL2		7	/* 10G control 2 */
-#define MDIO_STAT2		8	/* 10G status 2 */
-#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
-#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
-#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
-#define MDIO_PKGID1		14	/* Package identifier */
-#define MDIO_PKGID2		15
-#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
-#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
-#define MDIO_PCS_EEE_ABLE	20	/* EEE Capability register */
-#define MDIO_PCS_EEE_WK_ERR	22	/* EEE wake error counter */
-#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
-#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
-#define MDIO_AN_EEE_LPABLE	61	/* EEE link partner ability */
-
-/* Media-dependent registers. */
-#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
-#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
-#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
-					 * Lanes B-D are numbered 134-136. */
-#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
-#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
-#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
-#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
-#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
-#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
-
-/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
-#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
-#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
-#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
-#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
-#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
-#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
-
-/* Control register 1. */
-/* Enable extended speed selection */
-#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
-/* All speed selection bits */
-#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
-#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
-#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
-#define MDIO_CTRL1_RESET		BMCR_RESET
-#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
-#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
-#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
-#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
-#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
-#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
-#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
-#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
-#define MDIO_PCS_CTRL1_CLKSTOP_EN	0x400	/* Stop the clock during LPI */
-
-/* 10 Gb/s */
-#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
-/* 10PASS-TS/2BASE-TL */
-#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
-
-/* Status register 1. */
-#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
-#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
-#define MDIO_STAT1_FAULT		0x0080	/* Fault */
-#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
-#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
-#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
-#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
-#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
-#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
-
-/* Speed register. */
-#define MDIO_SPEED_10G			0x0001	/* 10G capable */
-#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
-#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
-#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
-#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
-#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
-#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
-
-/* Device present registers. */
-#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
-#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
-#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
-#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
-#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
-#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
-#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
-#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
-#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
-
-/* Control register 2. */
-#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
-#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
-#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
-#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
-#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
-#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
-#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
-#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
-#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
-#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
-#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
-#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
-#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
-#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
-#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
-#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
-#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
-#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
-#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
-#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
-#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
-#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
-
-/* Status register 2. */
-#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
-#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
-#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
-#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
-#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
-#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
-#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
-#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
-#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
-#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
-#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
-#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
-#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
-#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
-#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
-#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
-#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
-#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
-#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
-#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
-#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
-
-/* Transmit disable register. */
-#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
-#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
-#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
-#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
-#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
-
-/* Receive signal detect register. */
-#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
-#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
-#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
-#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
-#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
-
-/* Extended abilities register. */
-#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
-#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
-#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
-#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
-#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
-#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
-#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
-#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
-#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
-
-/* PHY XGXS lane state register. */
-#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
-#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
-#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
-#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
-#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
-
-/* PMA 10GBASE-T pair swap & polarity */
-#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
-#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
-#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
-#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
-
-/* PMA 10GBASE-T TX power register. */
-#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
-
-/* PMA 10GBASE-T SNR registers. */
-/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
-#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
-#define MDIO_PMA_10GBT_SNR_MAX		127
-
-/* PMA 10GBASE-R FEC ability register. */
-#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
-#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
-
-/* PCS 10GBASE-R/-T status register 1. */
-#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
-
-/* PCS 10GBASE-R/-T status register 2. */
-#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
-#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
-
-/* AN 10GBASE-T control register. */
-#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
-
-/* AN 10GBASE-T status register. */
-#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
-#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
-#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
-#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
-#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
-#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
-#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
-
-/* EEE Supported/Advertisement/LP Advertisement registers.
- *
- * EEE capability Register (3.20), Advertisement (7.60) and
- * Link partner ability (7.61) registers have and can use the same identical
- * bit masks.
- */
-#define MDIO_AN_EEE_ADV_100TX	0x0002	/* Advertise 100TX EEE cap */
-#define MDIO_AN_EEE_ADV_1000T	0x0004	/* Advertise 1000T EEE cap */
-/* Note: the two defines above can be potentially used by the user-land
- * and cannot remove them now.
- * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
- * using the previous ones (that can be considered obsolete).
- */
-#define MDIO_EEE_100TX		MDIO_AN_EEE_ADV_100TX	/* 100TX EEE cap */
-#define MDIO_EEE_1000T		MDIO_AN_EEE_ADV_1000T	/* 1000T EEE cap */
-#define MDIO_EEE_10GT		0x0008	/* 10GT EEE cap */
-#define MDIO_EEE_1000KX		0x0010	/* 1000KX EEE cap */
-#define MDIO_EEE_10GKX4		0x0020	/* 10G KX4 EEE cap */
-#define MDIO_EEE_10GKR		0x0040	/* 10G KR EEE cap */
-
-/* LASI RX_ALARM control/status registers. */
-#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
-#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
-#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
-#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
-#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
-
-/* LASI TX_ALARM control/status registers. */
-#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
-#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
-#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
-#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
-#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
-#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
-
-/* LASI control/status registers. */
-#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
-#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
-#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
-
-/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
-
-#define MDIO_PHY_ID_C45			0x8000
-#define MDIO_PHY_ID_PRTAD		0x03e0
-#define MDIO_PHY_ID_DEVAD		0x001f
-#define MDIO_PHY_ID_C45_MASK						\
-	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
-
-static inline __u16 mdio_phy_id_c45(int prtad, int devad)
-{
-	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
-}
-
-#ifdef __KERNEL__
 
 static inline bool mdio_phy_id_is_c45(int phy_id)
 {
@@ -460,5 +176,4 @@
 	return reg;
 }
 
-#endif /* __KERNEL__ */
 #endif /* __LINUX_MDIO_H__ */
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index cec5693..e5ccb9d 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -1,66 +1,10 @@
-#ifndef _LINUX_MEMPOLICY_H
-#define _LINUX_MEMPOLICY_H 1
-
-#include <linux/errno.h>
-
 /*
  * NUMA memory policies for Linux.
  * Copyright 2003,2004 Andi Kleen SuSE Labs
  */
+#ifndef _LINUX_MEMPOLICY_H
+#define _LINUX_MEMPOLICY_H 1
 
-/*
- * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are
- * passed by the user to either set_mempolicy() or mbind() in an 'int' actual.
- * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags.
- */
-
-/* Policies */
-enum {
-	MPOL_DEFAULT,
-	MPOL_PREFERRED,
-	MPOL_BIND,
-	MPOL_INTERLEAVE,
-	MPOL_MAX,	/* always last member of enum */
-};
-
-enum mpol_rebind_step {
-	MPOL_REBIND_ONCE,	/* do rebind work at once(not by two step) */
-	MPOL_REBIND_STEP1,	/* first step(set all the newly nodes) */
-	MPOL_REBIND_STEP2,	/* second step(clean all the disallowed nodes)*/
-	MPOL_REBIND_NSTEP,
-};
-
-/* Flags for set_mempolicy */
-#define MPOL_F_STATIC_NODES	(1 << 15)
-#define MPOL_F_RELATIVE_NODES	(1 << 14)
-
-/*
- * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to
- * either set_mempolicy() or mbind().
- */
-#define MPOL_MODE_FLAGS	(MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
-
-/* Flags for get_mempolicy */
-#define MPOL_F_NODE	(1<<0)	/* return next IL mode instead of node mask */
-#define MPOL_F_ADDR	(1<<1)	/* look up vma using address */
-#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */
-
-/* Flags for mbind */
-#define MPOL_MF_STRICT	(1<<0)	/* Verify existing pages in the mapping */
-#define MPOL_MF_MOVE	(1<<1)	/* Move pages owned by this process to conform to mapping */
-#define MPOL_MF_MOVE_ALL (1<<2)	/* Move every page to conform to mapping */
-#define MPOL_MF_INTERNAL (1<<3)	/* Internal flags start here */
-
-/*
- * Internal flags that share the struct mempolicy flags word with
- * "mode flags".  These flags are allocated from bit 0 up, as they
- * are never OR'ed into the mode in mempolicy API arguments.
- */
-#define MPOL_F_SHARED  (1 << 0)	/* identify shared policies */
-#define MPOL_F_LOCAL   (1 << 1)	/* preferred local allocation */
-#define MPOL_F_REBINDING (1 << 2)	/* identify policies in rebinding */
-
-#ifdef __KERNEL__
 
 #include <linux/mmzone.h>
 #include <linux/slab.h>
@@ -68,6 +12,7 @@
 #include <linux/spinlock.h>
 #include <linux/nodemask.h>
 #include <linux/pagemap.h>
+#include <uapi/linux/mempolicy.h>
 
 struct mm_struct;
 
@@ -379,6 +324,4 @@
 }
 
 #endif /* CONFIG_NUMA */
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 8ef3a7a..47492c9 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -4,163 +4,12 @@
  *
  * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
  */
-
 #ifndef __LINUX_MII_H__
 #define __LINUX_MII_H__
 
-#include <linux/types.h>
-#include <linux/ethtool.h>
-
-/* Generic MII registers. */
-#define MII_BMCR		0x00	/* Basic mode control register */
-#define MII_BMSR		0x01	/* Basic mode status register  */
-#define MII_PHYSID1		0x02	/* PHYS ID 1                   */
-#define MII_PHYSID2		0x03	/* PHYS ID 2                   */
-#define MII_ADVERTISE		0x04	/* Advertisement control reg   */
-#define MII_LPA			0x05	/* Link partner ability reg    */
-#define MII_EXPANSION		0x06	/* Expansion register          */
-#define MII_CTRL1000		0x09	/* 1000BASE-T control          */
-#define MII_STAT1000		0x0a	/* 1000BASE-T status           */
-#define	MII_MMD_CTRL		0x0d	/* MMD Access Control Register */
-#define	MII_MMD_DATA		0x0e	/* MMD Access Data Register */
-#define MII_ESTATUS		0x0f	/* Extended Status             */
-#define MII_DCOUNTER		0x12	/* Disconnect counter          */
-#define MII_FCSCOUNTER		0x13	/* False carrier counter       */
-#define MII_NWAYTEST		0x14	/* N-way auto-neg test reg     */
-#define MII_RERRCOUNTER		0x15	/* Receive error counter       */
-#define MII_SREVISION		0x16	/* Silicon revision            */
-#define MII_RESV1		0x17	/* Reserved...                 */
-#define MII_LBRERROR		0x18	/* Lpback, rx, bypass error    */
-#define MII_PHYADDR		0x19	/* PHY address                 */
-#define MII_RESV2		0x1a	/* Reserved...                 */
-#define MII_TPISTATUS		0x1b	/* TPI status for 10mbps       */
-#define MII_NCONFIG		0x1c	/* Network interface config    */
-
-/* Basic mode control register. */
-#define BMCR_RESV		0x003f	/* Unused...                   */
-#define BMCR_SPEED1000		0x0040	/* MSB of Speed (1000)         */
-#define BMCR_CTST		0x0080	/* Collision test              */
-#define BMCR_FULLDPLX		0x0100	/* Full duplex                 */
-#define BMCR_ANRESTART		0x0200	/* Auto negotiation restart    */
-#define BMCR_ISOLATE		0x0400	/* Isolate data paths from MII */
-#define BMCR_PDOWN		0x0800	/* Enable low power state      */
-#define BMCR_ANENABLE		0x1000	/* Enable auto negotiation     */
-#define BMCR_SPEED100		0x2000	/* Select 100Mbps              */
-#define BMCR_LOOPBACK		0x4000	/* TXD loopback bits           */
-#define BMCR_RESET		0x8000	/* Reset to default state      */
-
-/* Basic mode status register. */
-#define BMSR_ERCAP		0x0001	/* Ext-reg capability          */
-#define BMSR_JCD		0x0002	/* Jabber detected             */
-#define BMSR_LSTATUS		0x0004	/* Link status                 */
-#define BMSR_ANEGCAPABLE	0x0008	/* Able to do auto-negotiation */
-#define BMSR_RFAULT		0x0010	/* Remote fault detected       */
-#define BMSR_ANEGCOMPLETE	0x0020	/* Auto-negotiation complete   */
-#define BMSR_RESV		0x00c0	/* Unused...                   */
-#define BMSR_ESTATEN		0x0100	/* Extended Status in R15      */
-#define BMSR_100HALF2		0x0200	/* Can do 100BASE-T2 HDX       */
-#define BMSR_100FULL2		0x0400	/* Can do 100BASE-T2 FDX       */
-#define BMSR_10HALF		0x0800	/* Can do 10mbps, half-duplex  */
-#define BMSR_10FULL		0x1000	/* Can do 10mbps, full-duplex  */
-#define BMSR_100HALF		0x2000	/* Can do 100mbps, half-duplex */
-#define BMSR_100FULL		0x4000	/* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4		0x8000	/* Can do 100mbps, 4k packets  */
-
-/* Advertisement control register. */
-#define ADVERTISE_SLCT		0x001f	/* Selector bits               */
-#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
-#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
-#define ADVERTISE_1000XFULL	0x0020	/* Try for 1000BASE-X full-duplex */
-#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
-#define ADVERTISE_1000XHALF	0x0040	/* Try for 1000BASE-X half-duplex */
-#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
-#define ADVERTISE_1000XPAUSE	0x0080	/* Try for 1000BASE-X pause    */
-#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
-#define ADVERTISE_1000XPSE_ASYM	0x0100	/* Try for 1000BASE-X asym pause */
-#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
-#define ADVERTISE_PAUSE_CAP	0x0400	/* Try for pause               */
-#define ADVERTISE_PAUSE_ASYM	0x0800	/* Try for asymetric pause     */
-#define ADVERTISE_RESV		0x1000	/* Unused...                   */
-#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
-#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
-#define ADVERTISE_NPAGE		0x8000	/* Next page bit               */
-
-#define ADVERTISE_FULL		(ADVERTISE_100FULL | ADVERTISE_10FULL | \
-				  ADVERTISE_CSMA)
-#define ADVERTISE_ALL		(ADVERTISE_10HALF | ADVERTISE_10FULL | \
-				  ADVERTISE_100HALF | ADVERTISE_100FULL)
-
-/* Link partner ability register. */
-#define LPA_SLCT		0x001f	/* Same as advertise selector  */
-#define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
-#define LPA_1000XFULL		0x0020	/* Can do 1000BASE-X full-duplex */
-#define LPA_10FULL		0x0040	/* Can do 10mbps full-duplex   */
-#define LPA_1000XHALF		0x0040	/* Can do 1000BASE-X half-duplex */
-#define LPA_100HALF		0x0080	/* Can do 100mbps half-duplex  */
-#define LPA_1000XPAUSE		0x0080	/* Can do 1000BASE-X pause     */
-#define LPA_100FULL		0x0100	/* Can do 100mbps full-duplex  */
-#define LPA_1000XPAUSE_ASYM	0x0100	/* Can do 1000BASE-X pause asym*/
-#define LPA_100BASE4		0x0200	/* Can do 100mbps 4k packets   */
-#define LPA_PAUSE_CAP		0x0400	/* Can pause                   */
-#define LPA_PAUSE_ASYM		0x0800	/* Can pause asymetrically     */
-#define LPA_RESV		0x1000	/* Unused...                   */
-#define LPA_RFAULT		0x2000	/* Link partner faulted        */
-#define LPA_LPACK		0x4000	/* Link partner acked us       */
-#define LPA_NPAGE		0x8000	/* Next page bit               */
-
-#define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
-#define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
-
-/* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY		0x0001	/* Can do N-way auto-nego      */
-#define EXPANSION_LCWP		0x0002	/* Got new RX page code word   */
-#define EXPANSION_ENABLENPAGE	0x0004	/* This enables npage words    */
-#define EXPANSION_NPCAPABLE	0x0008	/* Link partner supports npage */
-#define EXPANSION_MFAULTS	0x0010	/* Multiple faults detected    */
-#define EXPANSION_RESV		0xffe0	/* Unused...                   */
-
-#define ESTATUS_1000_TFULL	0x2000	/* Can do 1000BT Full          */
-#define ESTATUS_1000_THALF	0x1000	/* Can do 1000BT Half          */
-
-/* N-way test register. */
-#define NWAYTEST_RESV1		0x00ff	/* Unused...                   */
-#define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
-#define NWAYTEST_RESV2		0xfe00	/* Unused...                   */
-
-/* 1000BASE-T Control register */
-#define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
-#define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */
-#define CTL1000_AS_MASTER	0x0800
-#define CTL1000_ENABLE_MASTER	0x1000
-
-/* 1000BASE-T Status register */
-#define LPA_1000LOCALRXOK	0x2000	/* Link partner local receiver status */
-#define LPA_1000REMRXOK		0x1000	/* Link partner remote receiver status */
-#define LPA_1000FULL		0x0800	/* Link partner 1000BASE-T full duplex */
-#define LPA_1000HALF		0x0400	/* Link partner 1000BASE-T half duplex */
-
-/* Flow control flags */
-#define FLOW_CTRL_TX		0x01
-#define FLOW_CTRL_RX		0x02
-
-/* MMD Access Control register fields */
-#define MII_MMD_CTRL_DEVAD_MASK	0x1f	/* Mask MMD DEVAD*/
-#define MII_MMD_CTRL_ADDR	0x0000	/* Address */
-#define MII_MMD_CTRL_NOINCR	0x4000	/* no post increment */
-#define MII_MMD_CTRL_INCR_RDWT	0x8000	/* post increment on reads & writes */
-#define MII_MMD_CTRL_INCR_ON_WT	0xC000	/* post increment on writes only */
-
-/* This structure is used in all SIOCxMIIxxx ioctl calls */
-struct mii_ioctl_data {
-	__u16		phy_id;
-	__u16		reg_num;
-	__u16		val_in;
-	__u16		val_out;
-};
-
-#ifdef __KERNEL__
 
 #include <linux/if.h>
+#include <uapi/linux/mii.h>
 
 struct ethtool_cmd;
 
@@ -487,5 +336,4 @@
 	return cap;
 }
 
-#endif /* __KERNEL__ */
 #endif /* __LINUX_MII_H__ */
diff --git a/include/linux/mman.h b/include/linux/mman.h
index 77cec2f..d09dde1 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -1,20 +1,11 @@
 #ifndef _LINUX_MMAN_H
 #define _LINUX_MMAN_H
 
-#include <asm/mman.h>
-
-#define MREMAP_MAYMOVE	1
-#define MREMAP_FIXED	2
-
-#define OVERCOMMIT_GUESS		0
-#define OVERCOMMIT_ALWAYS		1
-#define OVERCOMMIT_NEVER		2
-
-#ifdef __KERNEL__
 #include <linux/mm.h>
 #include <linux/percpu_counter.h>
 
 #include <linux/atomic.h>
+#include <uapi/linux/mman.h>
 
 extern int sysctl_overcommit_memory;
 extern int sysctl_overcommit_ratio;
@@ -88,5 +79,4 @@
 	       _calc_vm_trans(flags, MAP_DENYWRITE,  VM_DENYWRITE ) |
 	       _calc_vm_trans(flags, MAP_LOCKED,     VM_LOCKED    );
 }
-#endif /* __KERNEL__ */
 #endif /* _LINUX_MMAN_H */
diff --git a/include/linux/mmc/Kbuild b/include/linux/mmc/Kbuild
index 1fb2644..e69de29 100644
--- a/include/linux/mmc/Kbuild
+++ b/include/linux/mmc/Kbuild
@@ -1 +0,0 @@
-header-y += ioctl.h
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 46caaf4..ea00d91 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -1,138 +1,10 @@
 #ifndef __LINUX_MROUTE_H
 #define __LINUX_MROUTE_H
 
-#include <linux/sockios.h>
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <linux/in.h>
-#endif
-
-/*
- *	Based on the MROUTING 3.5 defines primarily to keep
- *	source compatibility with BSD.
- *
- *	See the mrouted code for the original history.
- *
- *      Protocol Independent Multicast (PIM) data structures included
- *      Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT_BASE	200
-#define MRT_INIT	(MRT_BASE)	/* Activate the kernel mroute code 	*/
-#define MRT_DONE	(MRT_BASE+1)	/* Shutdown the kernel mroute		*/
-#define MRT_ADD_VIF	(MRT_BASE+2)	/* Add a virtual interface		*/
-#define MRT_DEL_VIF	(MRT_BASE+3)	/* Delete a virtual interface		*/
-#define MRT_ADD_MFC	(MRT_BASE+4)	/* Add a multicast forwarding entry	*/
-#define MRT_DEL_MFC	(MRT_BASE+5)	/* Delete a multicast forwarding entry	*/
-#define MRT_VERSION	(MRT_BASE+6)	/* Get the kernel multicast version	*/
-#define MRT_ASSERT	(MRT_BASE+7)	/* Activate PIM assert mode		*/
-#define MRT_PIM		(MRT_BASE+8)	/* enable PIM code			*/
-#define MRT_TABLE	(MRT_BASE+9)	/* Specify mroute table ID		*/
-
-#define SIOCGETVIFCNT	SIOCPROTOPRIVATE	/* IP protocol privates */
-#define SIOCGETSGCNT	(SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
-
-#define MAXVIFS		32	
-typedef unsigned long vifbitmap_t;	/* User mode code depends on this lot */
-typedef unsigned short vifi_t;
-#define ALL_VIFS	((vifi_t)(-1))
-
-/*
- *	Same idea as select
- */
- 
-#define VIFM_SET(n,m)	((m)|=(1<<(n)))
-#define VIFM_CLR(n,m)	((m)&=~(1<<(n)))
-#define VIFM_ISSET(n,m)	((m)&(1<<(n)))
-#define VIFM_CLRALL(m)	((m)=0)
-#define VIFM_COPY(mfrom,mto)	((mto)=(mfrom))
-#define VIFM_SAME(m1,m2)	((m1)==(m2))
-
-/*
- *	Passed by mrouted for an MRT_ADD_VIF - again we use the
- *	mrouted 3.6 structures for compatibility
- */
- 
-struct vifctl {
-	vifi_t	vifc_vifi;		/* Index of VIF */
-	unsigned char vifc_flags;	/* VIFF_ flags */
-	unsigned char vifc_threshold;	/* ttl limit */
-	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
-	union {
-		struct in_addr vifc_lcl_addr;     /* Local interface address */
-		int            vifc_lcl_ifindex;  /* Local interface index   */
-	};
-	struct in_addr vifc_rmt_addr;	/* IPIP tunnel addr */
-};
-
-#define VIFF_TUNNEL		0x1	/* IPIP tunnel */
-#define VIFF_SRCRT		0x2	/* NI */
-#define VIFF_REGISTER		0x4	/* register vif	*/
-#define VIFF_USE_IFINDEX	0x8	/* use vifc_lcl_ifindex instead of
-					   vifc_lcl_addr to find an interface */
-
-/*
- *	Cache manipulation structures for mrouted and PIMd
- */
- 
-struct mfcctl {
-	struct in_addr mfcc_origin;		/* Origin of mcast	*/
-	struct in_addr mfcc_mcastgrp;		/* Group in question	*/
-	vifi_t	mfcc_parent;			/* Where it arrived	*/
-	unsigned char mfcc_ttls[MAXVIFS];	/* Where it is going	*/
-	unsigned int mfcc_pkt_cnt;		/* pkt count for src-grp */
-	unsigned int mfcc_byte_cnt;
-	unsigned int mfcc_wrong_if;
-	int	     mfcc_expire;
-};
-
-/* 
- *	Group count retrieval for mrouted
- */
- 
-struct sioc_sg_req {
-	struct in_addr src;
-	struct in_addr grp;
-	unsigned long pktcnt;
-	unsigned long bytecnt;
-	unsigned long wrong_if;
-};
-
-/*
- *	To get vif packet counts
- */
-
-struct sioc_vif_req {
-	vifi_t	vifi;		/* Which iface */
-	unsigned long icount;	/* In packets */
-	unsigned long ocount;	/* Out packets */
-	unsigned long ibytes;	/* In bytes */
-	unsigned long obytes;	/* Out bytes */
-};
-
-/*
- *	This is the format the mroute daemon expects to see IGMP control
- *	data. Magically happens to be like an IP packet as per the original
- */
- 
-struct igmpmsg {
-	__u32 unused1,unused2;
-	unsigned char im_msgtype;		/* What is this */
-	unsigned char im_mbz;			/* Must be zero */
-	unsigned char im_vif;			/* Interface (this ought to be a vifi_t!) */
-	unsigned char unused3;
-	struct in_addr im_src,im_dst;
-};
-
-/*
- *	That's all usermode folks
- */
-
-#ifdef __KERNEL__
 #include <linux/pim.h>
 #include <net/sock.h>
+#include <uapi/linux/mroute.h>
 
 #ifdef CONFIG_IP_MROUTE
 static inline int ip_mroute_opt(int opt)
@@ -228,24 +100,8 @@
 #define MFC_HASH(a,b)	((((__force u32)(__be32)a)^(((__force u32)(__be32)b)>>2))&(MFC_LINES-1))
 #endif		
 
-#endif
-
-
-#define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
-
-/*
- *	Pseudo messages used by mrouted
- */
-
-#define IGMPMSG_NOCACHE		1		/* Kern cache fill request to mrouted */
-#define IGMPMSG_WRONGVIF	2		/* For PIM assert processing (unused) */
-#define IGMPMSG_WHOLEPKT	3		/* For PIM Register processing */
-
-#ifdef __KERNEL__
 struct rtmsg;
 extern int ipmr_get_route(struct net *net, struct sk_buff *skb,
 			  __be32 saddr, __be32 daddr,
 			  struct rtmsg *rtm, int nowait);
 #endif
-
-#endif
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 6d8c725..a223561 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -1,123 +1,11 @@
 #ifndef __LINUX_MROUTE6_H
 #define __LINUX_MROUTE6_H
 
-#include <linux/types.h>
-#include <linux/sockios.h>
-
-/*
- *	Based on the MROUTING 3.5 defines primarily to keep
- *	source compatibility with BSD.
- *
- *	See the pim6sd code for the original history.
- *
- *      Protocol Independent Multicast (PIM) data structures included
- *      Carlos Picoto (cap@di.fc.ul.pt)
- *
- */
-
-#define MRT6_BASE	200
-#define MRT6_INIT	(MRT6_BASE)	/* Activate the kernel mroute code 	*/
-#define MRT6_DONE	(MRT6_BASE+1)	/* Shutdown the kernel mroute		*/
-#define MRT6_ADD_MIF	(MRT6_BASE+2)	/* Add a virtual interface		*/
-#define MRT6_DEL_MIF	(MRT6_BASE+3)	/* Delete a virtual interface		*/
-#define MRT6_ADD_MFC	(MRT6_BASE+4)	/* Add a multicast forwarding entry	*/
-#define MRT6_DEL_MFC	(MRT6_BASE+5)	/* Delete a multicast forwarding entry	*/
-#define MRT6_VERSION	(MRT6_BASE+6)	/* Get the kernel multicast version	*/
-#define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/
-#define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/
-#define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/
-
-#define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */
-#define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1)
-#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
-
-#define MAXMIFS		32
-typedef unsigned long mifbitmap_t;	/* User mode code depends on this lot */
-typedef unsigned short mifi_t;
-#define ALL_MIFS	((mifi_t)(-1))
-
-#ifndef IF_SETSIZE
-#define IF_SETSIZE	256
-#endif
-
-typedef	__u32		if_mask;
-#define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */
-
-#if !defined(__KERNEL__)
-#if !defined(DIV_ROUND_UP)
-#define	DIV_ROUND_UP(x,y)	(((x) + ((y) - 1)) / (y))
-#endif
-#endif
-
-typedef struct if_set {
-	if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
-} if_set;
-
-#define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
-#define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
-#define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
-#define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f)))
-#define IF_ZERO(p)      bzero(p, sizeof(*(p)))
-
-/*
- *	Passed by mrouted for an MRT_ADD_MIF - again we use the
- *	mrouted 3.6 structures for compatibility
- */
-
-struct mif6ctl {
-	mifi_t	mif6c_mifi;		/* Index of MIF */
-	unsigned char mif6c_flags;	/* MIFF_ flags */
-	unsigned char vifc_threshold;	/* ttl limit */
-	__u16	 mif6c_pifi;		/* the index of the physical IF */
-	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
-};
-
-#define MIFF_REGISTER	0x1	/* register vif	*/
-
-/*
- *	Cache manipulation structures for mrouted and PIMd
- */
-
-struct mf6cctl {
-	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
-	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
-	mifi_t	mf6cc_parent;			/* Where it arrived	*/
-	struct if_set mf6cc_ifset;		/* Where it is going */
-};
-
-/*
- *	Group count retrieval for pim6sd
- */
-
-struct sioc_sg_req6 {
-	struct sockaddr_in6 src;
-	struct sockaddr_in6 grp;
-	unsigned long pktcnt;
-	unsigned long bytecnt;
-	unsigned long wrong_if;
-};
-
-/*
- *	To get vif packet counts
- */
-
-struct sioc_mif_req6 {
-	mifi_t	mifi;		/* Which iface */
-	unsigned long icount;	/* In packets */
-	unsigned long ocount;	/* Out packets */
-	unsigned long ibytes;	/* In bytes */
-	unsigned long obytes;	/* Out bytes */
-};
-
-/*
- *	That's all usermode folks
- */
-
-#ifdef __KERNEL__
 
 #include <linux/pim.h>
 #include <linux/skbuff.h>	/* for struct sk_buff_head */
 #include <net/net_namespace.h>
+#include <uapi/linux/mroute6.h>
 
 #ifdef CONFIG_IPV6_MROUTE
 static inline int ip6_mroute_opt(int opt)
@@ -225,9 +113,6 @@
 
 #define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
 
-#endif
-
-#ifdef __KERNEL__
 struct rtmsg;
 extern int ip6mr_get_route(struct net *net, struct sk_buff *skb,
 			   struct rtmsg *rtm, int nowait);
@@ -246,24 +131,3 @@
 }
 #endif
 #endif
-
-/*
- * Structure used to communicate from kernel to multicast router.
- * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
- * used for IPv4 implementation). This is because this structure will be passed via an
- * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
- * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
- */
-
-struct mrt6msg {
-#define MRT6MSG_NOCACHE		1
-#define MRT6MSG_WRONGMIF	2
-#define MRT6MSG_WHOLEPKT	3		/* used for use level encap */
-	__u8		im6_mbz;		/* must be zero		   */
-	__u8		im6_msgtype;		/* what type of message    */
-	__u16		im6_mif;		/* mif rec'd on		   */
-	__u32		im6_pad;		/* padding for 64 bit arch */
-	struct in6_addr	im6_src, im6_dst;
-};
-
-#endif
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index 11cc2ac..e1b163f9 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -1,174 +1,11 @@
 #ifndef _LINUX_MSDOS_FS_H
 #define _LINUX_MSDOS_FS_H
 
-#include <linux/types.h>
-#include <linux/magic.h>
-#include <asm/byteorder.h>
+#include <uapi/linux/msdos_fs.h>
 
-/*
- * The MS-DOS filesystem constants/structures
- */
-
-#define SECTOR_SIZE	512		/* sector size (bytes) */
-#define SECTOR_BITS	9		/* log2(SECTOR_SIZE) */
-#define MSDOS_DPB	(MSDOS_DPS)	/* dir entries per block */
-#define MSDOS_DPB_BITS	4		/* log2(MSDOS_DPB) */
-#define MSDOS_DPS	(SECTOR_SIZE / sizeof(struct msdos_dir_entry))
-#define MSDOS_DPS_BITS	4		/* log2(MSDOS_DPS) */
-#define MSDOS_LONGNAME	256		/* maximum name length */
-#define CF_LE_W(v)	le16_to_cpu(v)
-#define CF_LE_L(v)	le32_to_cpu(v)
-#define CT_LE_W(v)	cpu_to_le16(v)
-#define CT_LE_L(v)	cpu_to_le32(v)
-
-#define MSDOS_ROOT_INO	 1	/* The root inode number */
-#define MSDOS_FSINFO_INO 2	/* Used for managing the FSINFO block */
-
-#define MSDOS_DIR_BITS	5	/* log2(sizeof(struct msdos_dir_entry)) */
-
-/* directory limit */
-#define FAT_MAX_DIR_ENTRIES	(65536)
-#define FAT_MAX_DIR_SIZE	(FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS)
-
-#define ATTR_NONE	0	/* no attribute bits */
-#define ATTR_RO		1	/* read-only */
-#define ATTR_HIDDEN	2	/* hidden */
-#define ATTR_SYS	4	/* system */
-#define ATTR_VOLUME	8	/* volume label */
-#define ATTR_DIR	16	/* directory */
-#define ATTR_ARCH	32	/* archived */
-
-/* attribute bits that are copied "as is" */
-#define ATTR_UNUSED	(ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN)
-/* bits that are used by the Windows 95/Windows NT extended FAT */
-#define ATTR_EXT	(ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
-
-#define CASE_LOWER_BASE	8	/* base is lower case */
-#define CASE_LOWER_EXT	16	/* extension is lower case */
-
-#define DELETED_FLAG	0xe5	/* marks file as deleted when in name[0] */
-#define IS_FREE(n)	(!*(n) || *(n) == DELETED_FLAG)
-
-#define FAT_LFN_LEN	255	/* maximum long name length */
-#define MSDOS_NAME	11	/* maximum name length */
-#define MSDOS_SLOTS	21	/* max # of slots for short and long names */
-#define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
-#define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
-
-#define FAT_FIRST_ENT(s, x)	((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
-	MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
-
-/* start of data cluster's entry (number of reserved clusters) */
-#define FAT_START_ENT	2
-
-/* maximum number of clusters */
-#define MAX_FAT12	0xFF4
-#define MAX_FAT16	0xFFF4
-#define MAX_FAT32	0x0FFFFFF6
-#define MAX_FAT(s)	(MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \
-	MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12)
-
-/* bad cluster mark */
-#define BAD_FAT12	0xFF7
-#define BAD_FAT16	0xFFF7
-#define BAD_FAT32	0x0FFFFFF7
-
-/* standard EOF */
-#define EOF_FAT12	0xFFF
-#define EOF_FAT16	0xFFFF
-#define EOF_FAT32	0x0FFFFFFF
-
-#define FAT_ENT_FREE	(0)
-#define FAT_ENT_BAD	(BAD_FAT32)
-#define FAT_ENT_EOF	(EOF_FAT32)
-
-#define FAT_FSINFO_SIG1	0x41615252
-#define FAT_FSINFO_SIG2	0x61417272
-#define IS_FSINFO(x)	(le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
-			 && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
-
-struct __fat_dirent {
-	long		d_ino;
-	__kernel_off_t	d_off;
-	unsigned short	d_reclen;
-	char		d_name[256]; /* We must not include limits.h! */
-};
-
-/*
- * ioctl commands
- */
-#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct __fat_dirent[2])
-#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct __fat_dirent[2])
-/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
-#define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
-#define FAT_IOCTL_SET_ATTRIBUTES	_IOW('r', 0x11, __u32)
-
-struct fat_boot_sector {
-	__u8	ignored[3];	/* Boot strap short or near jump */
-	__u8	system_id[8];	/* Name - can be used to special case
-				   partition manager volumes */
-	__u8	sector_size[2];	/* bytes per logical sector */
-	__u8	sec_per_clus;	/* sectors/cluster */
-	__le16	reserved;	/* reserved sectors */
-	__u8	fats;		/* number of FATs */
-	__u8	dir_entries[2];	/* root directory entries */
-	__u8	sectors[2];	/* number of sectors */
-	__u8	media;		/* media code */
-	__le16	fat_length;	/* sectors/FAT */
-	__le16	secs_track;	/* sectors per track */
-	__le16	heads;		/* number of heads */
-	__le32	hidden;		/* hidden sectors (unused) */
-	__le32	total_sect;	/* number of sectors (if sectors == 0) */
-
-	/* The following fields are only used by FAT32 */
-	__le32	fat32_length;	/* sectors/FAT */
-	__le16	flags;		/* bit 8: fat mirroring, low 4: active fat */
-	__u8	version[2];	/* major, minor filesystem version */
-	__le32	root_cluster;	/* first cluster in root directory */
-	__le16	info_sector;	/* filesystem info sector */
-	__le16	backup_boot;	/* backup boot sector */
-	__le16	reserved2[6];	/* Unused */
-};
-
-struct fat_boot_fsinfo {
-	__le32   signature1;	/* 0x41615252L */
-	__le32   reserved1[120];	/* Nothing as far as I can tell */
-	__le32   signature2;	/* 0x61417272L */
-	__le32   free_clusters;	/* Free cluster count.  -1 if unknown */
-	__le32   next_cluster;	/* Most recently allocated cluster */
-	__le32   reserved2[4];
-};
-
-struct msdos_dir_entry {
-	__u8	name[MSDOS_NAME];/* name and extension */
-	__u8	attr;		/* attribute bits */
-	__u8    lcase;		/* Case for base and extension */
-	__u8	ctime_cs;	/* Creation time, centiseconds (0-199) */
-	__le16	ctime;		/* Creation time */
-	__le16	cdate;		/* Creation date */
-	__le16	adate;		/* Last access date */
-	__le16	starthi;	/* High 16 bits of cluster in FAT32 */
-	__le16	time,date,start;/* time, date and first cluster */
-	__le32	size;		/* file size (in bytes) */
-};
-
-/* Up to 13 characters of the name */
-struct msdos_dir_slot {
-	__u8    id;		/* sequence number for slot */
-	__u8    name0_4[10];	/* first 5 characters in name */
-	__u8    attr;		/* attribute byte */
-	__u8    reserved;	/* always 0 */
-	__u8    alias_checksum;	/* checksum for 8.3 alias */
-	__u8    name5_10[12];	/* 6 more characters in name */
-	__le16   start;		/* starting cluster number, 0 in long slots */
-	__u8    name11_12[4];	/* last 2 characters in name */
-};
-
-#ifdef __KERNEL__
 /* media of boot sector */
 static inline int fat_valid_media(u8 media)
 {
 	return 0xf8 <= media || media == 0xf0;
 }
-#endif /* !__KERNEL__ */
 #endif /* !_LINUX_MSDOS_FS_H */
diff --git a/include/linux/msg.h b/include/linux/msg.h
index 56abf155..7a4b9e9 100644
--- a/include/linux/msg.h
+++ b/include/linux/msg.h
@@ -1,78 +1,8 @@
 #ifndef _LINUX_MSG_H
 #define _LINUX_MSG_H
 
-#include <linux/ipc.h>
-
-/* ipcs ctl commands */
-#define MSG_STAT 11
-#define MSG_INFO 12
-
-/* msgrcv options */
-#define MSG_NOERROR     010000  /* no error if message is too big */
-#define MSG_EXCEPT      020000  /* recv any msg except of specified type.*/
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct msqid_ds {
-	struct ipc_perm msg_perm;
-	struct msg *msg_first;		/* first message on queue,unused  */
-	struct msg *msg_last;		/* last message in queue,unused */
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long  msg_lcbytes;	/* Reuse junk fields for 32 bit */
-	unsigned long  msg_lqbytes;	/* ditto */
-	unsigned short msg_cbytes;	/* current number of bytes on queue */
-	unsigned short msg_qnum;	/* number of messages in queue */
-	unsigned short msg_qbytes;	/* max number of bytes on queue */
-	__kernel_ipc_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_ipc_pid_t msg_lrpid;	/* last receive pid */
-};
-
-/* Include the definition of msqid64_ds */
-#include <asm/msgbuf.h>
-
-/* message buffer for msgsnd and msgrcv calls */
-struct msgbuf {
-	long mtype;         /* type of message */
-	char mtext[1];      /* message text */
-};
-
-/* buffer for msgctl calls IPC_INFO, MSG_INFO */
-struct msginfo {
-	int msgpool;
-	int msgmap; 
-	int msgmax; 
-	int msgmnb; 
-	int msgmni; 
-	int msgssz; 
-	int msgtql; 
-	unsigned short  msgseg; 
-};
-
-/*
- * Scaling factor to compute msgmni:
- * the memory dedicated to msg queues (msgmni * msgmnb) should occupy
- * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c):
- * up to 8MB       : msgmni = 16 (MSGMNI)
- * 4 GB            : msgmni = 8K
- * more than 16 GB : msgmni = 32K (IPCMNI)
- */
-#define MSG_MEM_SCALE 32
-
-#define MSGMNI    16   /* <= IPCMNI */     /* max # of msg queue identifiers */
-#define MSGMAX  8192   /* <= INT_MAX */   /* max size of message (bytes) */
-#define MSGMNB 16384   /* <= INT_MAX */   /* default max size of a message queue */
-
-/* unused */
-#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
-#define MSGTQL  MSGMNB            /* number of system message headers */
-#define MSGMAP  MSGMNB            /* number of entries in message map */
-#define MSGSSZ  16                /* message segment size */
-#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
-#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
-
-#ifdef __KERNEL__
 #include <linux/list.h>
+#include <uapi/linux/msg.h>
 
 /* one msg_msg structure for each message */
 struct msg_msg {
@@ -107,6 +37,4 @@
 extern long do_msgrcv(int msqid, long *pmtype, void __user *mtext,
 			size_t msgsz, long msgtyp, int msgflg);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_MSG_H */
diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
index 54b8e0d..5d0b2a1 100644
--- a/include/linux/n_r3964.h
+++ b/include/linux/n_r3964.h
@@ -43,15 +43,12 @@
  *
  *
  */
-
 #ifndef __LINUX_N_R3964_H__
 #define __LINUX_N_R3964_H__
 
-/* line disciplines for r3964 protocol */
-
-#ifdef __KERNEL__
 
 #include <linux/param.h>
+#include <uapi/linux/n_r3964.h>
 
 /*
  * Common ascii handshake characters:
@@ -73,32 +70,6 @@
 #define R3964_TO_RX_PANIC ((4000)*HZ/1000)
 #define R3964_MAX_RETRIES 5
 
-#endif
-
-/*
- * Ioctl-commands
- */
-
-#define R3964_ENABLE_SIGNALS      0x5301
-#define R3964_SETPRIORITY         0x5302
-#define R3964_USE_BCC             0x5303
-#define R3964_READ_TELEGRAM       0x5304
-
-/* Options for R3964_SETPRIORITY */
-#define R3964_MASTER   0
-#define R3964_SLAVE    1
-
-/* Options for R3964_ENABLE_SIGNALS */
-#define R3964_SIG_ACK   0x0001
-#define R3964_SIG_DATA  0x0002
-#define R3964_SIG_ALL   0x000f
-#define R3964_SIG_NONE  0x0000
-#define R3964_USE_SIGIO 0x1000
-
-/*
- * r3964 operation states:
- */
-#ifdef __KERNEL__
 
 enum { R3964_IDLE, 
 	   R3964_TX_REQUEST, R3964_TRANSMITTING, 
@@ -127,29 +98,6 @@
 };
 
 
-#endif
-
-/* types for msg_id: */
-enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
-
-#define R3964_MAX_MSG_COUNT 32
-
-/* error codes for client messages */
-#define R3964_OK 0        /* no error. */
-#define R3964_TX_FAIL -1  /* transmission error, block NOT sent */
-#define R3964_OVERFLOW -2 /* msg queue overflow */
-
-/* the client gets this struct when calling read(fd,...): */
-struct r3964_client_message {
-	  int     msg_id;
-	  int     arg;
-	  int     error_code;
-};
-
-#define R3964_MTU      256
-
-
-#ifdef __KERNEL__
 
 struct r3964_block_header;
 
@@ -226,6 +174,4 @@
 	int nRetry;
 };
 
-#endif	
-
 #endif
diff --git a/include/linux/nbd.h b/include/linux/nbd.h
index 5c86e2b..4871170 100644
--- a/include/linux/nbd.h
+++ b/include/linux/nbd.h
@@ -11,45 +11,13 @@
  * 2004/02/19 Paul Clements
  *            Removed PARANOIA, plus various cleanup and comments
  */
-
 #ifndef LINUX_NBD_H
 #define LINUX_NBD_H
 
-#include <linux/types.h>
-
-#define NBD_SET_SOCK	_IO( 0xab, 0 )
-#define NBD_SET_BLKSIZE	_IO( 0xab, 1 )
-#define NBD_SET_SIZE	_IO( 0xab, 2 )
-#define NBD_DO_IT	_IO( 0xab, 3 )
-#define NBD_CLEAR_SOCK	_IO( 0xab, 4 )
-#define NBD_CLEAR_QUE	_IO( 0xab, 5 )
-#define NBD_PRINT_DEBUG	_IO( 0xab, 6 )
-#define NBD_SET_SIZE_BLOCKS	_IO( 0xab, 7 )
-#define NBD_DISCONNECT  _IO( 0xab, 8 )
-#define NBD_SET_TIMEOUT _IO( 0xab, 9 )
-#define NBD_SET_FLAGS   _IO( 0xab, 10)
-
-enum {
-	NBD_CMD_READ = 0,
-	NBD_CMD_WRITE = 1,
-	NBD_CMD_DISC = 2,
-	/* there is a gap here to match userspace */
-	NBD_CMD_TRIM = 4
-};
-
-/* values for flags field */
-#define NBD_FLAG_HAS_FLAGS    (1 << 0) /* nbd-server supports flags */
-#define NBD_FLAG_READ_ONLY    (1 << 1) /* device is read-only */
-/* there is a gap here to match userspace */
-#define NBD_FLAG_SEND_TRIM    (1 << 5) /* send trim/discard */
-
-#define nbd_cmd(req) ((req)->cmd[0])
-
-/* userspace doesn't need the nbd_device structure */
-#ifdef __KERNEL__
 
 #include <linux/wait.h>
 #include <linux/mutex.h>
+#include <uapi/linux/nbd.h>
 
 struct request;
 
@@ -76,32 +44,3 @@
 };
 
 #endif
-
-/* These are sent over the network in the request/reply magic fields */
-
-#define NBD_REQUEST_MAGIC 0x25609513
-#define NBD_REPLY_MAGIC 0x67446698
-/* Do *not* use magics: 0x12560953 0x96744668. */
-
-/*
- * This is the packet used for communication between client and
- * server. All data are in network byte order.
- */
-struct nbd_request {
-	__be32 magic;
-	__be32 type;	/* == READ || == WRITE 	*/
-	char handle[8];
-	__be64 from;
-	__be32 len;
-} __attribute__((packed));
-
-/*
- * This is the reply packet that nbd-server sends back to the client after
- * it has completed an I/O request (or an error occurs).
- */
-struct nbd_reply {
-	__be32 magic;
-	__be32 error;		/* 0 = ok, else error	*/
-	char handle[8];		/* handle you got from request	*/
-};
-#endif
diff --git a/include/linux/net.h b/include/linux/net.h
index 6ab31ca..aa16731 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -18,49 +18,13 @@
 #ifndef _LINUX_NET_H
 #define _LINUX_NET_H
 
-#include <linux/socket.h>
-#include <asm/socket.h>
-
-#define NPROTO		AF_MAX
-
-#define SYS_SOCKET	1		/* sys_socket(2)		*/
-#define SYS_BIND	2		/* sys_bind(2)			*/
-#define SYS_CONNECT	3		/* sys_connect(2)		*/
-#define SYS_LISTEN	4		/* sys_listen(2)		*/
-#define SYS_ACCEPT	5		/* sys_accept(2)		*/
-#define SYS_GETSOCKNAME	6		/* sys_getsockname(2)		*/
-#define SYS_GETPEERNAME	7		/* sys_getpeername(2)		*/
-#define SYS_SOCKETPAIR	8		/* sys_socketpair(2)		*/
-#define SYS_SEND	9		/* sys_send(2)			*/
-#define SYS_RECV	10		/* sys_recv(2)			*/
-#define SYS_SENDTO	11		/* sys_sendto(2)		*/
-#define SYS_RECVFROM	12		/* sys_recvfrom(2)		*/
-#define SYS_SHUTDOWN	13		/* sys_shutdown(2)		*/
-#define SYS_SETSOCKOPT	14		/* sys_setsockopt(2)		*/
-#define SYS_GETSOCKOPT	15		/* sys_getsockopt(2)		*/
-#define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
-#define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
-#define SYS_ACCEPT4	18		/* sys_accept4(2)		*/
-#define SYS_RECVMMSG	19		/* sys_recvmmsg(2)		*/
-#define SYS_SENDMMSG	20		/* sys_sendmmsg(2)		*/
-
-typedef enum {
-	SS_FREE = 0,			/* not allocated		*/
-	SS_UNCONNECTED,			/* unconnected to any socket	*/
-	SS_CONNECTING,			/* in process of connecting	*/
-	SS_CONNECTED,			/* connected to socket		*/
-	SS_DISCONNECTING		/* in process of disconnecting	*/
-} socket_state;
-
-#define __SO_ACCEPTCON	(1 << 16)	/* performed a listen		*/
-
-#ifdef __KERNEL__
 #include <linux/stringify.h>
 #include <linux/random.h>
 #include <linux/wait.h>
 #include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
 #include <linux/kmemcheck.h>
 #include <linux/rcupdate.h>
+#include <uapi/linux/net.h>
 
 struct poll_table_struct;
 struct pipe_inode_info;
@@ -319,5 +283,4 @@
 #define MODULE_ALIAS_NET_PF_PROTO_NAME(pf, proto, name) \
 	MODULE_ALIAS("net-pf-" __stringify(pf) "-proto-" __stringify(proto) \
 		     name)
-#endif /* __KERNEL__ */
 #endif	/* _LINUX_NET_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 561c8bc..f8eda02 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -25,12 +25,6 @@
 #ifndef _LINUX_NETDEVICE_H
 #define _LINUX_NETDEVICE_H
 
-#include <linux/if.h>
-#include <linux/if_ether.h>
-#include <linux/if_packet.h>
-#include <linux/if_link.h>
-
-#ifdef __KERNEL__
 #include <linux/pm_qos.h>
 #include <linux/timer.h>
 #include <linux/bug.h>
@@ -55,6 +49,7 @@
 
 #include <linux/netdev_features.h>
 #include <linux/neighbour.h>
+#include <uapi/linux/netdevice.h>
 
 struct netpoll_info;
 struct device;
@@ -133,14 +128,6 @@
 	return false;
 }
 
-#endif
-
-#define MAX_ADDR_LEN	32		/* Largest hardware address length */
-
-/* Initial net device group. All devices belong to group 0 by default. */
-#define INIT_NETDEV_GROUP	0
-
-#ifdef  __KERNEL__
 /*
  *	Compute the worst case header length according to the protocols
  *	used.
@@ -196,21 +183,6 @@
 	unsigned long	tx_compressed;
 };
 
-#endif  /*  __KERNEL__  */
-
-
-/* Media selection options. */
-enum {
-        IF_PORT_UNKNOWN = 0,
-        IF_PORT_10BASE2,
-        IF_PORT_10BASET,
-        IF_PORT_AUI,
-        IF_PORT_100BASET,
-        IF_PORT_100BASETX,
-        IF_PORT_100BASEFX
-};
-
-#ifdef __KERNEL__
 
 #include <linux/cache.h>
 #include <linux/skbuff.h>
@@ -2844,6 +2816,4 @@
 })
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif	/* _LINUX_NETDEVICE_H */
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index 1dcf2a3..ee14284 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -1,7 +1,6 @@
 #ifndef __LINUX_NETFILTER_H
 #define __LINUX_NETFILTER_H
 
-#ifdef __KERNEL__
 #include <linux/init.h>
 #include <linux/skbuff.h>
 #include <linux/net.h>
@@ -10,75 +9,7 @@
 #include <linux/in6.h>
 #include <linux/wait.h>
 #include <linux/list.h>
-#endif
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/sysctl.h>
-
-/* Responses from hook functions. */
-#define NF_DROP 0
-#define NF_ACCEPT 1
-#define NF_STOLEN 2
-#define NF_QUEUE 3
-#define NF_REPEAT 4
-#define NF_STOP 5
-#define NF_MAX_VERDICT NF_STOP
-
-/* we overload the higher bits for encoding auxiliary data such as the queue
- * number or errno values. Not nice, but better than additional function
- * arguments. */
-#define NF_VERDICT_MASK 0x000000ff
-
-/* extra verdict flags have mask 0x0000ff00 */
-#define NF_VERDICT_FLAG_QUEUE_BYPASS	0x00008000
-
-/* queue number (NF_QUEUE) or errno (NF_DROP) */
-#define NF_VERDICT_QMASK 0xffff0000
-#define NF_VERDICT_QBITS 16
-
-#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE)
-
-#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP)
-
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-/* Generic cache responses from hook functions.
-   <= 0x2000 is used for protocol-flags. */
-#define NFC_UNKNOWN 0x4000
-#define NFC_ALTERED 0x8000
-
-/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */
-#define NF_VERDICT_BITS 16
-#endif
-
-enum nf_inet_hooks {
-	NF_INET_PRE_ROUTING,
-	NF_INET_LOCAL_IN,
-	NF_INET_FORWARD,
-	NF_INET_LOCAL_OUT,
-	NF_INET_POST_ROUTING,
-	NF_INET_NUMHOOKS
-};
-
-enum {
-	NFPROTO_UNSPEC =  0,
-	NFPROTO_IPV4   =  2,
-	NFPROTO_ARP    =  3,
-	NFPROTO_BRIDGE =  7,
-	NFPROTO_IPV6   = 10,
-	NFPROTO_DECNET = 12,
-	NFPROTO_NUMPROTO,
-};
-
-union nf_inet_addr {
-	__u32		all[4];
-	__be32		ip;
-	__be32		ip6[4];
-	struct in_addr	in;
-	struct in6_addr	in6;
-};
-
-#ifdef __KERNEL__
+#include <uapi/linux/netfilter.h>
 #ifdef CONFIG_NETFILTER
 static inline int NF_DROP_GETERR(int verdict)
 {
@@ -411,5 +342,4 @@
 static inline void nf_ct_attach(struct sk_buff *new, struct sk_buff *skb) {}
 #endif
 
-#endif /*__KERNEL__*/
 #endif /*__LINUX_NETFILTER_H*/
diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h
index 31d2844..dfb4d9e 100644
--- a/include/linux/netfilter_bridge.h
+++ b/include/linux/netfilter_bridge.h
@@ -1,30 +1,8 @@
 #ifndef __LINUX_BRIDGE_NETFILTER_H
 #define __LINUX_BRIDGE_NETFILTER_H
 
-/* bridge-specific defines for netfilter. 
- */
+#include <uapi/linux/netfilter_bridge.h>
 
-#include <linux/netfilter.h>
-#include <linux/if_ether.h>
-#include <linux/if_vlan.h>
-#include <linux/if_pppox.h>
-
-/* Bridge Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_BR_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_BR_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_BR_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_BR_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_BR_POST_ROUTING	4
-/* Not really a hook, but used for the ebtables broute table */
-#define NF_BR_BROUTING		5
-#define NF_BR_NUMHOOKS		6
-
-#ifdef __KERNEL__
 
 enum nf_br_hook_priorities {
 	NF_BR_PRI_FIRST = INT_MIN,
@@ -118,5 +96,4 @@
 #define br_drop_fake_rtable(skb)	        do { } while (0)
 #endif /* CONFIG_BRIDGE_NETFILTER */
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h
index b962dfc..dfaf116 100644
--- a/include/linux/netfilter_ipv4.h
+++ b/include/linux/netfilter_ipv4.h
@@ -1,86 +1,12 @@
-#ifndef __LINUX_IP_NETFILTER_H
-#define __LINUX_IP_NETFILTER_H
-
 /* IPv4-specific defines for netfilter. 
  * (C)1998 Rusty Russell -- This code is GPL.
  */
+#ifndef __LINUX_IP_NETFILTER_H
+#define __LINUX_IP_NETFILTER_H
 
-#include <linux/netfilter.h>
+#include <uapi/linux/netfilter_ipv4.h>
 
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_IP_SRC		0x0001
-/* Dest IP address. */
-#define NFC_IP_DST		0x0002
-/* Input device. */
-#define NFC_IP_IF_IN		0x0004
-/* Output device. */
-#define NFC_IP_IF_OUT		0x0008
-/* TOS. */
-#define NFC_IP_TOS		0x0010
-/* Protocol. */
-#define NFC_IP_PROTO		0x0020
-/* IP options. */
-#define NFC_IP_OPTIONS		0x0040
-/* Frag & flags. */
-#define NFC_IP_FRAG		0x0080
-
-/* Per-protocol information: only matters if proto match. */
-/* TCP flags. */
-#define NFC_IP_TCPFLAGS		0x0100
-/* Source port. */
-#define NFC_IP_SRC_PT		0x0200
-/* Dest port. */
-#define NFC_IP_DST_PT		0x0400
-/* Something else about the proto */
-#define NFC_IP_PROTO_UNKNOWN	0x2000
-
-/* IP Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_IP_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_IP_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_IP_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_IP_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_IP_POST_ROUTING	4
-#define NF_IP_NUMHOOKS		5
-#endif /* ! __KERNEL__ */
-
-enum nf_ip_hook_priorities {
-	NF_IP_PRI_FIRST = INT_MIN,
-	NF_IP_PRI_CONNTRACK_DEFRAG = -400,
-	NF_IP_PRI_RAW = -300,
-	NF_IP_PRI_SELINUX_FIRST = -225,
-	NF_IP_PRI_CONNTRACK = -200,
-	NF_IP_PRI_MANGLE = -150,
-	NF_IP_PRI_NAT_DST = -100,
-	NF_IP_PRI_FILTER = 0,
-	NF_IP_PRI_SECURITY = 50,
-	NF_IP_PRI_NAT_SRC = 100,
-	NF_IP_PRI_SELINUX_LAST = 225,
-	NF_IP_PRI_CONNTRACK_HELPER = 300,
-	NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
-	NF_IP_PRI_LAST = INT_MAX,
-};
-
-/* Arguments for setsockopt SOL_IP: */
-/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */
-/* 2.2 firewalling (+ masq) went from 64 through 76 */
-/* 2.4 firewalling went 64 through 67. */
-#define SO_ORIGINAL_DST 80
-
-#ifdef __KERNEL__
 extern int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type);
 extern __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook,
 				   unsigned int dataoff, u_int8_t protocol);
-#endif /*__KERNEL__*/
-
 #endif /*__LINUX_IP_NETFILTER_H*/
diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
index 7c8a513..98ffb54 100644
--- a/include/linux/netfilter_ipv6.h
+++ b/include/linux/netfilter_ipv6.h
@@ -1,81 +1,14 @@
-#ifndef __LINUX_IP6_NETFILTER_H
-#define __LINUX_IP6_NETFILTER_H
-
 /* IPv6-specific defines for netfilter. 
  * (C)1998 Rusty Russell -- This code is GPL.
  * (C)1999 David Jeffery
  *   this header was blatantly ripped from netfilter_ipv4.h 
  *   it's amazing what adding a bunch of 6s can do =8^)
  */
+#ifndef __LINUX_IP6_NETFILTER_H
+#define __LINUX_IP6_NETFILTER_H
 
-#include <linux/netfilter.h>
+#include <uapi/linux/netfilter_ipv6.h>
 
-/* only for userspace compatibility */
-#ifndef __KERNEL__
-
-#include <limits.h> /* for INT_MIN, INT_MAX */
-
-/* IP Cache bits. */
-/* Src IP address. */
-#define NFC_IP6_SRC              0x0001
-/* Dest IP address. */
-#define NFC_IP6_DST              0x0002
-/* Input device. */
-#define NFC_IP6_IF_IN            0x0004
-/* Output device. */
-#define NFC_IP6_IF_OUT           0x0008
-/* TOS. */
-#define NFC_IP6_TOS              0x0010
-/* Protocol. */
-#define NFC_IP6_PROTO            0x0020
-/* IP options. */
-#define NFC_IP6_OPTIONS          0x0040
-/* Frag & flags. */
-#define NFC_IP6_FRAG             0x0080
-
-
-/* Per-protocol information: only matters if proto match. */
-/* TCP flags. */
-#define NFC_IP6_TCPFLAGS         0x0100
-/* Source port. */
-#define NFC_IP6_SRC_PT           0x0200
-/* Dest port. */
-#define NFC_IP6_DST_PT           0x0400
-/* Something else about the proto */
-#define NFC_IP6_PROTO_UNKNOWN    0x2000
-
-/* IP6 Hooks */
-/* After promisc drops, checksum checks. */
-#define NF_IP6_PRE_ROUTING	0
-/* If the packet is destined for this box. */
-#define NF_IP6_LOCAL_IN		1
-/* If the packet is destined for another interface. */
-#define NF_IP6_FORWARD		2
-/* Packets coming from a local process. */
-#define NF_IP6_LOCAL_OUT		3
-/* Packets about to hit the wire. */
-#define NF_IP6_POST_ROUTING	4
-#define NF_IP6_NUMHOOKS		5
-#endif /* ! __KERNEL__ */
-
-
-enum nf_ip6_hook_priorities {
-	NF_IP6_PRI_FIRST = INT_MIN,
-	NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
-	NF_IP6_PRI_RAW = -300,
-	NF_IP6_PRI_SELINUX_FIRST = -225,
-	NF_IP6_PRI_CONNTRACK = -200,
-	NF_IP6_PRI_MANGLE = -150,
-	NF_IP6_PRI_NAT_DST = -100,
-	NF_IP6_PRI_FILTER = 0,
-	NF_IP6_PRI_SECURITY = 50,
-	NF_IP6_PRI_NAT_SRC = 100,
-	NF_IP6_PRI_SELINUX_LAST = 225,
-	NF_IP6_PRI_CONNTRACK_HELPER = 300,
-	NF_IP6_PRI_LAST = INT_MAX,
-};
-
-#ifdef  __KERNEL__
 
 #ifdef CONFIG_NETFILTER
 extern int ip6_route_me_harder(struct sk_buff *skb);
@@ -89,6 +22,4 @@
 static inline void ipv6_netfilter_fini(void) { return; }
 #endif /* CONFIG_NETFILTER */
 
-#endif /* __KERNEL__ */
-
 #endif /*__LINUX_IP6_NETFILTER_H*/
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 6d3af05c..e0f746b 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -1,160 +1,12 @@
 #ifndef __LINUX_NETLINK_H
 #define __LINUX_NETLINK_H
 
-#include <linux/socket.h> /* for __kernel_sa_family_t */
-#include <linux/types.h>
-
-#define NETLINK_ROUTE		0	/* Routing/device hook				*/
-#define NETLINK_UNUSED		1	/* Unused number				*/
-#define NETLINK_USERSOCK	2	/* Reserved for user mode socket protocols 	*/
-#define NETLINK_FIREWALL	3	/* Unused number, formerly ip_queue		*/
-#define NETLINK_SOCK_DIAG	4	/* socket monitoring				*/
-#define NETLINK_NFLOG		5	/* netfilter/iptables ULOG */
-#define NETLINK_XFRM		6	/* ipsec */
-#define NETLINK_SELINUX		7	/* SELinux event notifications */
-#define NETLINK_ISCSI		8	/* Open-iSCSI */
-#define NETLINK_AUDIT		9	/* auditing */
-#define NETLINK_FIB_LOOKUP	10	
-#define NETLINK_CONNECTOR	11
-#define NETLINK_NETFILTER	12	/* netfilter subsystem */
-#define NETLINK_IP6_FW		13
-#define NETLINK_DNRTMSG		14	/* DECnet routing messages */
-#define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
-#define NETLINK_GENERIC		16
-/* leave room for NETLINK_DM (DM Events) */
-#define NETLINK_SCSITRANSPORT	18	/* SCSI Transports */
-#define NETLINK_ECRYPTFS	19
-#define NETLINK_RDMA		20
-#define NETLINK_CRYPTO		21	/* Crypto layer */
-
-#define NETLINK_INET_DIAG	NETLINK_SOCK_DIAG
-
-#define MAX_LINKS 32		
-
-struct sockaddr_nl {
-	__kernel_sa_family_t	nl_family;	/* AF_NETLINK	*/
-	unsigned short	nl_pad;		/* zero		*/
-	__u32		nl_pid;		/* port ID	*/
-       	__u32		nl_groups;	/* multicast groups mask */
-};
-
-struct nlmsghdr {
-	__u32		nlmsg_len;	/* Length of message including header */
-	__u16		nlmsg_type;	/* Message content */
-	__u16		nlmsg_flags;	/* Additional flags */
-	__u32		nlmsg_seq;	/* Sequence number */
-	__u32		nlmsg_pid;	/* Sending process port ID */
-};
-
-/* Flags values */
-
-#define NLM_F_REQUEST		1	/* It is request message. 	*/
-#define NLM_F_MULTI		2	/* Multipart message, terminated by NLMSG_DONE */
-#define NLM_F_ACK		4	/* Reply with ack, with zero or error code */
-#define NLM_F_ECHO		8	/* Echo this request 		*/
-#define NLM_F_DUMP_INTR		16	/* Dump was inconsistent due to sequence change */
-
-/* Modifiers to GET request */
-#define NLM_F_ROOT	0x100	/* specify tree	root	*/
-#define NLM_F_MATCH	0x200	/* return all matching	*/
-#define NLM_F_ATOMIC	0x400	/* atomic GET		*/
-#define NLM_F_DUMP	(NLM_F_ROOT|NLM_F_MATCH)
-
-/* Modifiers to NEW request */
-#define NLM_F_REPLACE	0x100	/* Override existing		*/
-#define NLM_F_EXCL	0x200	/* Do not touch, if it exists	*/
-#define NLM_F_CREATE	0x400	/* Create, if it does not exist	*/
-#define NLM_F_APPEND	0x800	/* Add to end of list		*/
-
-/*
-   4.4BSD ADD		NLM_F_CREATE|NLM_F_EXCL
-   4.4BSD CHANGE	NLM_F_REPLACE
-
-   True CHANGE		NLM_F_CREATE|NLM_F_REPLACE
-   Append		NLM_F_CREATE
-   Check		NLM_F_EXCL
- */
-
-#define NLMSG_ALIGNTO	4U
-#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
-#define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
-#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
-#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
-#define NLMSG_DATA(nlh)  ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
-#define NLMSG_NEXT(nlh,len)	 ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
-				  (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
-#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
-			   (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
-			   (nlh)->nlmsg_len <= (len))
-#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
-
-#define NLMSG_NOOP		0x1	/* Nothing.		*/
-#define NLMSG_ERROR		0x2	/* Error		*/
-#define NLMSG_DONE		0x3	/* End of a dump	*/
-#define NLMSG_OVERRUN		0x4	/* Data lost		*/
-
-#define NLMSG_MIN_TYPE		0x10	/* < 0x10: reserved control messages */
-
-struct nlmsgerr {
-	int		error;
-	struct nlmsghdr msg;
-};
-
-#define NETLINK_ADD_MEMBERSHIP	1
-#define NETLINK_DROP_MEMBERSHIP	2
-#define NETLINK_PKTINFO		3
-#define NETLINK_BROADCAST_ERROR	4
-#define NETLINK_NO_ENOBUFS	5
-
-struct nl_pktinfo {
-	__u32	group;
-};
-
-#define NET_MAJOR 36		/* Major 36 is reserved for networking 						*/
-
-enum {
-	NETLINK_UNCONNECTED = 0,
-	NETLINK_CONNECTED,
-};
-
-/*
- *  <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
- * +---------------------+- - -+- - - - - - - - - -+- - -+
- * |        Header       | Pad |     Payload       | Pad |
- * |   (struct nlattr)   | ing |                   | ing |
- * +---------------------+- - -+- - - - - - - - - -+- - -+
- *  <-------------- nlattr->nla_len -------------->
- */
-
-struct nlattr {
-	__u16           nla_len;
-	__u16           nla_type;
-};
-
-/*
- * nla_type (16 bits)
- * +---+---+-------------------------------+
- * | N | O | Attribute Type                |
- * +---+---+-------------------------------+
- * N := Carries nested attributes
- * O := Payload stored in network byte order
- *
- * Note: The N and O flag are mutually exclusive.
- */
-#define NLA_F_NESTED		(1 << 15)
-#define NLA_F_NET_BYTEORDER	(1 << 14)
-#define NLA_TYPE_MASK		~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
-
-#define NLA_ALIGNTO		4
-#define NLA_ALIGN(len)		(((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
-#define NLA_HDRLEN		((int) NLA_ALIGN(sizeof(struct nlattr)))
-
-#ifdef __KERNEL__
 
 #include <linux/capability.h>
 #include <linux/skbuff.h>
 #include <linux/export.h>
 #include <net/scm.h>
+#include <uapi/linux/netlink.h>
 
 struct net;
 
@@ -283,6 +135,4 @@
 	return __netlink_dump_start(ssk, skb, nlh, control);
 }
 
-#endif /* __KERNEL__ */
-
 #endif	/* __LINUX_NETLINK_H */
diff --git a/include/linux/nfs.h b/include/linux/nfs.h
index 6d1fb63..3e794c1 100644
--- a/include/linux/nfs.h
+++ b/include/linux/nfs.h
@@ -7,130 +7,9 @@
 #ifndef _LINUX_NFS_H
 #define _LINUX_NFS_H
 
-#define NFS_PROGRAM	100003
-#define NFS_PORT	2049
-#define NFS_MAXDATA	8192
-#define NFS_MAXPATHLEN	1024
-#define NFS_MAXNAMLEN	255
-#define NFS_MAXGROUPS	16
-#define NFS_FHSIZE	32
-#define NFS_COOKIESIZE	4
-#define NFS_FIFO_DEV	(-1)
-#define NFSMODE_FMT	0170000
-#define NFSMODE_DIR	0040000
-#define NFSMODE_CHR	0020000
-#define NFSMODE_BLK	0060000
-#define NFSMODE_REG	0100000
-#define NFSMODE_LNK	0120000
-#define NFSMODE_SOCK	0140000
-#define NFSMODE_FIFO	0010000
-
-#define NFS_MNT_PROGRAM		100005
-#define NFS_MNT_VERSION		1
-#define NFS_MNT3_VERSION	3
-
-#define NFS_PIPE_DIRNAME "nfs"
-
-/*
- * NFS stats. The good thing with these values is that NFSv3 errors are
- * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
- * no-one uses anyway), so we can happily mix code as long as we make sure
- * no NFSv3 errors are returned to NFSv2 clients.
- * Error codes that have a `--' in the v2 column are not part of the
- * standard, but seem to be widely used nevertheless.
- */
- enum nfs_stat {
-	NFS_OK = 0,			/* v2 v3 v4 */
-	NFSERR_PERM = 1,		/* v2 v3 v4 */
-	NFSERR_NOENT = 2,		/* v2 v3 v4 */
-	NFSERR_IO = 5,			/* v2 v3 v4 */
-	NFSERR_NXIO = 6,		/* v2 v3 v4 */
-	NFSERR_EAGAIN = 11,		/* v2 v3 */
-	NFSERR_ACCES = 13,		/* v2 v3 v4 */
-	NFSERR_EXIST = 17,		/* v2 v3 v4 */
-	NFSERR_XDEV = 18,		/*    v3 v4 */
-	NFSERR_NODEV = 19,		/* v2 v3 v4 */
-	NFSERR_NOTDIR = 20,		/* v2 v3 v4 */
-	NFSERR_ISDIR = 21,		/* v2 v3 v4 */
-	NFSERR_INVAL = 22,		/* v2 v3 v4 */
-	NFSERR_FBIG = 27,		/* v2 v3 v4 */
-	NFSERR_NOSPC = 28,		/* v2 v3 v4 */
-	NFSERR_ROFS = 30,		/* v2 v3 v4 */
-	NFSERR_MLINK = 31,		/*    v3 v4 */
-	NFSERR_OPNOTSUPP = 45,		/* v2 v3 */
-	NFSERR_NAMETOOLONG = 63,	/* v2 v3 v4 */
-	NFSERR_NOTEMPTY = 66,		/* v2 v3 v4 */
-	NFSERR_DQUOT = 69,		/* v2 v3 v4 */
-	NFSERR_STALE = 70,		/* v2 v3 v4 */
-	NFSERR_REMOTE = 71,		/* v2 v3 */
-	NFSERR_WFLUSH = 99,		/* v2    */
-	NFSERR_BADHANDLE = 10001,	/*    v3 v4 */
-	NFSERR_NOT_SYNC = 10002,	/*    v3 */
-	NFSERR_BAD_COOKIE = 10003,	/*    v3 v4 */
-	NFSERR_NOTSUPP = 10004,		/*    v3 v4 */
-	NFSERR_TOOSMALL = 10005,	/*    v3 v4 */
-	NFSERR_SERVERFAULT = 10006,	/*    v3 v4 */
-	NFSERR_BADTYPE = 10007,		/*    v3 v4 */
-	NFSERR_JUKEBOX = 10008,		/*    v3 v4 */
-	NFSERR_SAME = 10009,		/*       v4 */
-	NFSERR_DENIED = 10010,		/*       v4 */
-	NFSERR_EXPIRED = 10011,		/*       v4 */
-	NFSERR_LOCKED = 10012,		/*       v4 */
-	NFSERR_GRACE = 10013,		/*       v4 */
-	NFSERR_FHEXPIRED = 10014,	/*       v4 */
-	NFSERR_SHARE_DENIED = 10015,	/*       v4 */
-	NFSERR_WRONGSEC = 10016,	/*       v4 */
-	NFSERR_CLID_INUSE = 10017,	/*       v4 */
-	NFSERR_RESOURCE = 10018,	/*       v4 */
-	NFSERR_MOVED = 10019,		/*       v4 */
-	NFSERR_NOFILEHANDLE = 10020,	/*       v4 */
-	NFSERR_MINOR_VERS_MISMATCH = 10021,   /* v4 */
-	NFSERR_STALE_CLIENTID = 10022,	/*       v4 */
-	NFSERR_STALE_STATEID = 10023,   /*       v4 */
-	NFSERR_OLD_STATEID = 10024,     /*       v4 */
-	NFSERR_BAD_STATEID = 10025,     /*       v4 */  
-	NFSERR_BAD_SEQID = 10026,	/*       v4 */
-	NFSERR_NOT_SAME = 10027,	/*       v4 */
-	NFSERR_LOCK_RANGE = 10028,	/*       v4 */
-	NFSERR_SYMLINK = 10029,		/*       v4 */
-	NFSERR_RESTOREFH = 10030,	/*       v4 */
-	NFSERR_LEASE_MOVED = 10031,	/*       v4 */
-	NFSERR_ATTRNOTSUPP = 10032,	/*       v4 */
-	NFSERR_NO_GRACE = 10033,	/*       v4 */
-	NFSERR_RECLAIM_BAD = 10034,	/*       v4 */
-	NFSERR_RECLAIM_CONFLICT = 10035,/*       v4 */
-	NFSERR_BAD_XDR = 10036,		/*       v4 */
-	NFSERR_LOCKS_HELD = 10037,	/*       v4 */
-	NFSERR_OPENMODE = 10038,       /*       v4 */
-	NFSERR_BADOWNER = 10039,       /*       v4 */
-	NFSERR_BADCHAR = 10040,        /*       v4 */
-	NFSERR_BADNAME = 10041,        /*       v4 */
-	NFSERR_BAD_RANGE = 10042,      /*       v4 */
-	NFSERR_LOCK_NOTSUPP = 10043,   /*       v4 */
-	NFSERR_OP_ILLEGAL = 10044,     /*       v4 */
-	NFSERR_DEADLOCK = 10045,       /*       v4 */
-	NFSERR_FILE_OPEN = 10046,      /*       v4 */
-	NFSERR_ADMIN_REVOKED = 10047,  /*       v4 */
-	NFSERR_CB_PATH_DOWN = 10048,   /*       v4 */
-};
-
-/* NFSv2 file types - beware, these are not the same in NFSv3 */
-
-enum nfs_ftype {
-	NFNON = 0,
-	NFREG = 1,
-	NFDIR = 2,
-	NFBLK = 3,
-	NFCHR = 4,
-	NFLNK = 5,
-	NFSOCK = 6,
-	NFBAD = 7,
-	NFFIFO = 8
-};
-
-#ifdef __KERNEL__
 #include <linux/sunrpc/msg_prot.h>
 #include <linux/string.h>
+#include <uapi/linux/nfs.h>
 
 /*
  * This is the kernel NFS client file handle representation
@@ -169,5 +48,4 @@
 	NFS_DATA_SYNC = 1,
 	NFS_FILE_SYNC = 2
 };
-#endif /* __KERNEL__ */
 #endif /* _LINUX_NFS_H */
diff --git a/include/linux/nfs3.h b/include/linux/nfs3.h
index 6ccfe3b..a778ad8 100644
--- a/include/linux/nfs3.h
+++ b/include/linux/nfs3.h
@@ -4,100 +4,10 @@
 #ifndef _LINUX_NFS3_H
 #define _LINUX_NFS3_H
 
-#define NFS3_PORT		2049
-#define NFS3_MAXDATA		32768
-#define NFS3_MAXPATHLEN		PATH_MAX
-#define NFS3_MAXNAMLEN		NAME_MAX
-#define NFS3_MAXGROUPS		16
-#define NFS3_FHSIZE		64
-#define NFS3_COOKIESIZE		4
-#define NFS3_CREATEVERFSIZE	8
-#define NFS3_COOKIEVERFSIZE	8
-#define NFS3_WRITEVERFSIZE	8
-#define NFS3_FIFO_DEV		(-1)
-#define NFS3MODE_FMT		0170000
-#define NFS3MODE_DIR		0040000
-#define NFS3MODE_CHR		0020000
-#define NFS3MODE_BLK		0060000
-#define NFS3MODE_REG		0100000
-#define NFS3MODE_LNK		0120000
-#define NFS3MODE_SOCK		0140000
-#define NFS3MODE_FIFO		0010000
+#include <uapi/linux/nfs3.h>
 
-/* Flags for access() call */
-#define NFS3_ACCESS_READ	0x0001
-#define NFS3_ACCESS_LOOKUP	0x0002
-#define NFS3_ACCESS_MODIFY	0x0004
-#define NFS3_ACCESS_EXTEND	0x0008
-#define NFS3_ACCESS_DELETE	0x0010
-#define NFS3_ACCESS_EXECUTE	0x0020
-#define NFS3_ACCESS_FULL	0x003f
-
-/* Flags for create mode */
-enum nfs3_createmode {
-	NFS3_CREATE_UNCHECKED = 0,
-	NFS3_CREATE_GUARDED = 1,
-	NFS3_CREATE_EXCLUSIVE = 2
-};
-
-/* NFSv3 file system properties */
-#define NFS3_FSF_LINK		0x0001
-#define NFS3_FSF_SYMLINK	0x0002
-#define NFS3_FSF_HOMOGENEOUS	0x0008
-#define NFS3_FSF_CANSETTIME	0x0010
-/* Some shorthands. See fs/nfsd/nfs3proc.c */
-#define NFS3_FSF_DEFAULT	0x001B
-#define NFS3_FSF_BILLYBOY	0x0018
-#define NFS3_FSF_READONLY	0x0008
-
-enum nfs3_ftype {
-	NF3NON  = 0,
-	NF3REG  = 1,
-	NF3DIR  = 2,
-	NF3BLK  = 3,
-	NF3CHR  = 4,
-	NF3LNK  = 5,
-	NF3SOCK = 6,
-	NF3FIFO = 7,	/* changed from NFSv2 (was 8) */
-	NF3BAD  = 8
-};
-
-struct nfs3_fh {
-	unsigned short size;
-	unsigned char  data[NFS3_FHSIZE];
-};
-
-#define NFS3_VERSION		3
-#define NFS3PROC_NULL		0
-#define NFS3PROC_GETATTR	1
-#define NFS3PROC_SETATTR	2
-#define NFS3PROC_LOOKUP		3
-#define NFS3PROC_ACCESS		4
-#define NFS3PROC_READLINK	5
-#define NFS3PROC_READ		6
-#define NFS3PROC_WRITE		7
-#define NFS3PROC_CREATE		8
-#define NFS3PROC_MKDIR		9
-#define NFS3PROC_SYMLINK	10
-#define NFS3PROC_MKNOD		11
-#define NFS3PROC_REMOVE		12
-#define NFS3PROC_RMDIR		13
-#define NFS3PROC_RENAME		14
-#define NFS3PROC_LINK		15
-#define NFS3PROC_READDIR	16
-#define NFS3PROC_READDIRPLUS	17
-#define NFS3PROC_FSSTAT		18
-#define NFS3PROC_FSINFO		19
-#define NFS3PROC_PATHCONF	20
-#define NFS3PROC_COMMIT		21
-
-#define NFS_MNT3_VERSION	3
- 
-
-#if defined(__KERNEL__)
 
 /* Number of 32bit words in post_op_attr */
 #define NFS3_POST_OP_ATTR_WORDS		22
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_NFS3_H */
diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h
index af2d2fa..e111fa4 100644
--- a/include/linux/nfs4.h
+++ b/include/linux/nfs4.h
@@ -9,168 +9,11 @@
  *  Kendrick Smith <kmsmith@umich.edu>
  *  Andy Adamson   <andros@umich.edu>
  */
-
 #ifndef _LINUX_NFS4_H
 #define _LINUX_NFS4_H
 
-#include <linux/types.h>
-
-#define NFS4_BITMAP_SIZE	2
-#define NFS4_VERIFIER_SIZE	8
-#define NFS4_STATEID_SEQID_SIZE 4
-#define NFS4_STATEID_OTHER_SIZE 12
-#define NFS4_STATEID_SIZE	(NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE)
-#define NFS4_FHSIZE		128
-#define NFS4_MAXPATHLEN		PATH_MAX
-#define NFS4_MAXNAMLEN		NAME_MAX
-#define NFS4_OPAQUE_LIMIT	1024
-#define NFS4_MAX_SESSIONID_LEN	16
-
-#define NFS4_ACCESS_READ        0x0001
-#define NFS4_ACCESS_LOOKUP      0x0002
-#define NFS4_ACCESS_MODIFY      0x0004
-#define NFS4_ACCESS_EXTEND      0x0008
-#define NFS4_ACCESS_DELETE      0x0010
-#define NFS4_ACCESS_EXECUTE     0x0020
-
-#define NFS4_FH_PERSISTENT		0x0000
-#define NFS4_FH_NOEXPIRE_WITH_OPEN	0x0001
-#define NFS4_FH_VOLATILE_ANY		0x0002
-#define NFS4_FH_VOL_MIGRATION		0x0004
-#define NFS4_FH_VOL_RENAME		0x0008
-
-#define NFS4_OPEN_RESULT_CONFIRM 0x0002
-#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
-
-#define NFS4_SHARE_ACCESS_MASK	0x000F
-#define NFS4_SHARE_ACCESS_READ	0x0001
-#define NFS4_SHARE_ACCESS_WRITE	0x0002
-#define NFS4_SHARE_ACCESS_BOTH	0x0003
-#define NFS4_SHARE_DENY_READ	0x0001
-#define NFS4_SHARE_DENY_WRITE	0x0002
-#define NFS4_SHARE_DENY_BOTH	0x0003
-
-/* nfs41 */
-#define NFS4_SHARE_WANT_MASK		0xFF00
-#define NFS4_SHARE_WANT_NO_PREFERENCE	0x0000
-#define NFS4_SHARE_WANT_READ_DELEG	0x0100
-#define NFS4_SHARE_WANT_WRITE_DELEG	0x0200
-#define NFS4_SHARE_WANT_ANY_DELEG	0x0300
-#define NFS4_SHARE_WANT_NO_DELEG	0x0400
-#define NFS4_SHARE_WANT_CANCEL		0x0500
-
-#define NFS4_SHARE_WHEN_MASK		0xF0000
-#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL	0x10000
-#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED		0x20000
-
-#define NFS4_CDFC4_FORE	0x1
-#define NFS4_CDFC4_BACK 0x2
-#define NFS4_CDFC4_BOTH 0x3
-#define NFS4_CDFC4_FORE_OR_BOTH 0x3
-#define NFS4_CDFC4_BACK_OR_BOTH 0x7
-
-#define NFS4_CDFS4_FORE 0x1
-#define NFS4_CDFS4_BACK 0x2
-#define NFS4_CDFS4_BOTH 0x3
-
-#define NFS4_SET_TO_SERVER_TIME	0
-#define NFS4_SET_TO_CLIENT_TIME	1
-
-#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0
-#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE  1
-#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE   2
-#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE   3
-
-#define ACL4_SUPPORT_ALLOW_ACL 0x01
-#define ACL4_SUPPORT_DENY_ACL  0x02
-#define ACL4_SUPPORT_AUDIT_ACL 0x04
-#define ACL4_SUPPORT_ALARM_ACL 0x08
-
-#define NFS4_ACE_FILE_INHERIT_ACE             0x00000001
-#define NFS4_ACE_DIRECTORY_INHERIT_ACE        0x00000002
-#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE     0x00000004
-#define NFS4_ACE_INHERIT_ONLY_ACE             0x00000008
-#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG   0x00000010
-#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG       0x00000020
-#define NFS4_ACE_IDENTIFIER_GROUP             0x00000040
-
-#define NFS4_ACE_READ_DATA                    0x00000001
-#define NFS4_ACE_LIST_DIRECTORY               0x00000001
-#define NFS4_ACE_WRITE_DATA                   0x00000002
-#define NFS4_ACE_ADD_FILE                     0x00000002
-#define NFS4_ACE_APPEND_DATA                  0x00000004
-#define NFS4_ACE_ADD_SUBDIRECTORY             0x00000004
-#define NFS4_ACE_READ_NAMED_ATTRS             0x00000008
-#define NFS4_ACE_WRITE_NAMED_ATTRS            0x00000010
-#define NFS4_ACE_EXECUTE                      0x00000020
-#define NFS4_ACE_DELETE_CHILD                 0x00000040
-#define NFS4_ACE_READ_ATTRIBUTES              0x00000080
-#define NFS4_ACE_WRITE_ATTRIBUTES             0x00000100
-#define NFS4_ACE_DELETE                       0x00010000
-#define NFS4_ACE_READ_ACL                     0x00020000
-#define NFS4_ACE_WRITE_ACL                    0x00040000
-#define NFS4_ACE_WRITE_OWNER                  0x00080000
-#define NFS4_ACE_SYNCHRONIZE                  0x00100000
-#define NFS4_ACE_GENERIC_READ                 0x00120081
-#define NFS4_ACE_GENERIC_WRITE                0x00160106
-#define NFS4_ACE_GENERIC_EXECUTE              0x001200A0
-#define NFS4_ACE_MASK_ALL                     0x001F01FF
-
-#define EXCHGID4_FLAG_SUPP_MOVED_REFER		0x00000001
-#define EXCHGID4_FLAG_SUPP_MOVED_MIGR		0x00000002
-#define EXCHGID4_FLAG_BIND_PRINC_STATEID	0x00000100
-
-#define EXCHGID4_FLAG_USE_NON_PNFS		0x00010000
-#define EXCHGID4_FLAG_USE_PNFS_MDS		0x00020000
-#define EXCHGID4_FLAG_USE_PNFS_DS		0x00040000
-#define EXCHGID4_FLAG_MASK_PNFS			0x00070000
-
-#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A	0x40000000
-#define EXCHGID4_FLAG_CONFIRMED_R		0x80000000
-/*
- * Since the validity of these bits depends on whether
- * they're set in the argument or response, have separate
- * invalid flag masks for arg (_A) and resp (_R).
- */
-#define EXCHGID4_FLAG_MASK_A			0x40070103
-#define EXCHGID4_FLAG_MASK_R			0x80070103
-
-#define SEQ4_STATUS_CB_PATH_DOWN		0x00000001
-#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING	0x00000002
-#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED	0x00000004
-#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED	0x00000008
-#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED	0x00000010
-#define SEQ4_STATUS_ADMIN_STATE_REVOKED		0x00000020
-#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED	0x00000040
-#define SEQ4_STATUS_LEASE_MOVED			0x00000080
-#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED	0x00000100
-#define SEQ4_STATUS_CB_PATH_DOWN_SESSION	0x00000200
-#define SEQ4_STATUS_BACKCHANNEL_FAULT		0x00000400
-
-#define NFS4_SECINFO_STYLE4_CURRENT_FH	0
-#define NFS4_SECINFO_STYLE4_PARENT	1
-
-#define NFS4_MAX_UINT64	(~(u64)0)
-
-/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations.
- * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly.
- */
-#define NFS4_MAX_OPS   8
-
-/* Our NFS4 client back channel server only wants the cb_sequene and the
- * actual operation per compound
- */
-#define NFS4_MAX_BACK_CHANNEL_OPS 2
-
-enum nfs4_acl_whotype {
-	NFS4_ACL_WHO_NAMED = 0,
-	NFS4_ACL_WHO_OWNER,
-	NFS4_ACL_WHO_GROUP,
-	NFS4_ACL_WHO_EVERYONE,
-};
-
-#ifdef __KERNEL__
 #include <linux/list.h>
+#include <uapi/linux/nfs4.h>
 
 struct nfs4_ace {
 	uint32_t	type;
@@ -673,10 +516,3 @@
 };
 
 #endif
-#endif
-
-/*
- * Local variables:
- *  c-basic-offset: 8
- * End:
- */
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index 334a2f5..1cc2568 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -5,38 +5,11 @@
  *
  *  OS-specific nfs filesystem definitions and declarations
  */
-
 #ifndef _LINUX_NFS_FS_H
 #define _LINUX_NFS_FS_H
 
-#include <linux/magic.h>
+#include <uapi/linux/nfs_fs.h>
 
-/* Default timeout values */
-#define NFS_DEF_UDP_TIMEO	(11)
-#define NFS_DEF_UDP_RETRANS	(3)
-#define NFS_DEF_TCP_TIMEO	(600)
-#define NFS_DEF_TCP_RETRANS	(2)
-
-#define NFS_MAX_UDP_TIMEOUT	(60*HZ)
-#define NFS_MAX_TCP_TIMEOUT	(600*HZ)
-
-#define NFS_DEF_ACREGMIN	(3)
-#define NFS_DEF_ACREGMAX	(60)
-#define NFS_DEF_ACDIRMIN	(30)
-#define NFS_DEF_ACDIRMAX	(60)
-
-/*
- * When flushing a cluster of dirty pages, there can be different
- * strategies:
- */
-#define FLUSH_SYNC		1	/* file being synced, or contention */
-#define FLUSH_STABLE		4	/* commit to stable storage */
-#define FLUSH_LOWPRI		8	/* low priority background flush */
-#define FLUSH_HIGHPRI		16	/* high priority memory reclaim flush */
-#define FLUSH_COND_STABLE	32	/* conditional stable write - only stable
-					 * if everything fits in one RPC */
-
-#ifdef __KERNEL__
 
 /*
  * Enable dprintk() debugging support for nfs client.
@@ -613,29 +586,6 @@
 
 #define NFS_JUKEBOX_RETRY_TIME (5 * HZ)
 
-#endif /* __KERNEL__ */
-
-/*
- * NFS debug flags
- */
-#define NFSDBG_VFS		0x0001
-#define NFSDBG_DIRCACHE		0x0002
-#define NFSDBG_LOOKUPCACHE	0x0004
-#define NFSDBG_PAGECACHE	0x0008
-#define NFSDBG_PROC		0x0010
-#define NFSDBG_XDR		0x0020
-#define NFSDBG_FILE		0x0040
-#define NFSDBG_ROOT		0x0080
-#define NFSDBG_CALLBACK		0x0100
-#define NFSDBG_CLIENT		0x0200
-#define NFSDBG_MOUNT		0x0400
-#define NFSDBG_FSCACHE		0x0800
-#define NFSDBG_PNFS		0x1000
-#define NFSDBG_PNFS_LD		0x2000
-#define NFSDBG_STATE		0x4000
-#define NFSDBG_ALL		0xFFFF
-
-#ifdef __KERNEL__
 
 # undef ifdebug
 # ifdef NFS_DEBUG
@@ -645,6 +595,4 @@
 #  define ifdebug(fac)		if (0)
 #  define NFS_IFDEBUG(x)
 # endif
-#endif /* __KERNEL */
-
 #endif
diff --git a/include/linux/nfs_idmap.h b/include/linux/nfs_idmap.h
index ece91c5..2dcef3a 100644
--- a/include/linux/nfs_idmap.h
+++ b/include/linux/nfs_idmap.h
@@ -33,35 +33,11 @@
  *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
-
 #ifndef NFS_IDMAP_H
 #define NFS_IDMAP_H
 
-#include <linux/types.h>
+#include <uapi/linux/nfs_idmap.h>
 
-/* XXX from bits/utmp.h  */
-#define IDMAP_NAMESZ  128
-
-#define IDMAP_TYPE_USER  0
-#define IDMAP_TYPE_GROUP 1
-
-#define IDMAP_CONV_IDTONAME 0
-#define IDMAP_CONV_NAMETOID 1
-
-#define IDMAP_STATUS_INVALIDMSG 0x01
-#define IDMAP_STATUS_AGAIN      0x02
-#define IDMAP_STATUS_LOOKUPFAIL 0x04
-#define IDMAP_STATUS_SUCCESS    0x08
-
-struct idmap_msg {
-	__u8  im_type;
-	__u8  im_conv;
-	char  im_name[IDMAP_NAMESZ];
-	__u32 im_id;
-	__u8  im_status;
-};
-
-#ifdef __KERNEL__
 
 /* Forward declaration to make this header independent of others */
 struct nfs_client;
@@ -97,6 +73,4 @@
 int nfs_map_gid_to_group(const struct nfs_server *, __u32, char *, size_t);
 
 extern unsigned int nfs_idmap_cache_timeout;
-#endif /* __KERNEL__ */
-
 #endif /* NFS_IDMAP_H */
diff --git a/include/linux/nfsacl.h b/include/linux/nfsacl.h
index fabcb1e..5e69e67 100644
--- a/include/linux/nfsacl.h
+++ b/include/linux/nfsacl.h
@@ -6,30 +6,10 @@
 #ifndef __LINUX_NFSACL_H
 #define __LINUX_NFSACL_H
 
-#define NFS_ACL_PROGRAM	100227
-
-#define ACLPROC2_GETACL		1
-#define ACLPROC2_SETACL		2
-#define ACLPROC2_GETATTR	3
-#define ACLPROC2_ACCESS		4
-
-#define ACLPROC3_GETACL		1
-#define ACLPROC3_SETACL		2
-
-
-/* Flags for the getacl/setacl mode */
-#define NFS_ACL			0x0001
-#define NFS_ACLCNT		0x0002
-#define NFS_DFACL		0x0004
-#define NFS_DFACLCNT		0x0008
-
-/* Flag for Default ACL entries */
-#define NFS_ACL_DEFAULT		0x1000
-
-#ifdef __KERNEL__
 
 #include <linux/posix_acl.h>
 #include <linux/sunrpc/xdr.h>
+#include <uapi/linux/nfsacl.h>
 
 /* Maximum number of ACL entries over NFS */
 #define NFS_ACL_MAX_ENTRIES	1024
@@ -58,5 +38,4 @@
 nfsacl_decode(struct xdr_buf *buf, unsigned int base, unsigned int *aclcnt,
 	      struct posix_acl **pacl);
 
-#endif /* __KERNEL__ */
 #endif  /* __LINUX_NFSACL_H */
diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild
index 5b7d84a..e69de29 100644
--- a/include/linux/nfsd/Kbuild
+++ b/include/linux/nfsd/Kbuild
@@ -1,5 +0,0 @@
-header-y += cld.h
-header-y += debug.h
-header-y += export.h
-header-y += nfsfh.h
-header-y += stats.h
diff --git a/include/linux/nfsd/debug.h b/include/linux/nfsd/debug.h
index ee4aa91..19ef837 100644
--- a/include/linux/nfsd/debug.h
+++ b/include/linux/nfsd/debug.h
@@ -5,44 +5,15 @@
  *
  * Copyright (C) 1995 Olaf Kirch <okir@monad.swb.de>
  */
-
 #ifndef LINUX_NFSD_DEBUG_H
 #define LINUX_NFSD_DEBUG_H
 
-#include <linux/sunrpc/debug.h>
+#include <uapi/linux/nfsd/debug.h>
 
-/*
- * Enable debugging for nfsd.
- * Requires RPC_DEBUG.
- */
-#ifdef RPC_DEBUG
-# define NFSD_DEBUG		1
-#endif
-
-/*
- * knfsd debug flags
- */
-#define NFSDDBG_SOCK		0x0001
-#define NFSDDBG_FH		0x0002
-#define NFSDDBG_EXPORT		0x0004
-#define NFSDDBG_SVC		0x0008
-#define NFSDDBG_PROC		0x0010
-#define NFSDDBG_FILEOP		0x0020
-#define NFSDDBG_AUTH		0x0040
-#define NFSDDBG_REPCACHE	0x0080
-#define NFSDDBG_XDR		0x0100
-#define NFSDDBG_LOCKD		0x0200
-#define NFSDDBG_ALL		0x7FFF
-#define NFSDDBG_NOCHANGE	0xFFFF
-
-
-#ifdef __KERNEL__
 # undef ifdebug
 # ifdef NFSD_DEBUG
 #  define ifdebug(flag)		if (nfsd_debug & NFSDDBG_##flag)
 # else
 #  define ifdebug(flag)		if (0)
 # endif
-#endif /* __KERNEL__ */
-
 #endif /* LINUX_NFSD_DEBUG_H */
diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h
index e33f747..24c1392 100644
--- a/include/linux/nfsd/export.h
+++ b/include/linux/nfsd/export.h
@@ -6,58 +6,11 @@
  *
  * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
  */
-
 #ifndef NFSD_EXPORT_H
 #define NFSD_EXPORT_H
 
-# include <linux/types.h>
-#ifdef __KERNEL__
 # include <linux/nfsd/nfsfh.h>
-#endif
-
-/*
- * Important limits for the exports stuff.
- */
-#define NFSCLNT_IDMAX		1024
-#define NFSCLNT_ADDRMAX		16
-#define NFSCLNT_KEYMAX		32
-
-/*
- * Export flags.
- */
-#define NFSEXP_READONLY		0x0001
-#define NFSEXP_INSECURE_PORT	0x0002
-#define NFSEXP_ROOTSQUASH	0x0004
-#define NFSEXP_ALLSQUASH	0x0008
-#define NFSEXP_ASYNC		0x0010
-#define NFSEXP_GATHERED_WRITES	0x0020
-/* 40 80 100 currently unused */
-#define NFSEXP_NOHIDE		0x0200
-#define NFSEXP_NOSUBTREECHECK	0x0400
-#define	NFSEXP_NOAUTHNLM	0x0800		/* Don't authenticate NLM requests - just trust */
-#define NFSEXP_MSNFS		0x1000	/* do silly things that MS clients expect; no longer supported */
-#define NFSEXP_FSID		0x2000
-#define	NFSEXP_CROSSMOUNT	0x4000
-#define	NFSEXP_NOACL		0x8000	/* reserved for possible ACL related use */
-/*
- * The NFSEXP_V4ROOT flag causes the kernel to give access only to NFSv4
- * clients, and only to the single directory that is the root of the
- * export; further lookup and readdir operations are treated as if every
- * subdirectory was a mountpoint, and ignored if they are not themselves
- * exported.  This is used by nfsd and mountd to construct the NFSv4
- * pseudofilesystem, which provides access only to paths leading to each
- * exported filesystem.
- */
-#define	NFSEXP_V4ROOT		0x10000
-/* All flags that we claim to support.  (Note we don't support NOACL.) */
-#define NFSEXP_ALLFLAGS		0x17E3F
-
-/* The flags that may vary depending on security flavor: */
-#define NFSEXP_SECINFO_FLAGS	(NFSEXP_READONLY | NFSEXP_ROOTSQUASH \
-					| NFSEXP_ALLSQUASH \
-					| NFSEXP_INSECURE_PORT)
-
-#ifdef __KERNEL__
+#include <uapi/linux/nfsd/export.h>
 
 /*
  * FS Locations
@@ -154,7 +107,4 @@
 }
 struct svc_export * rqst_exp_find(struct svc_rqst *, int, u32 *);
 
-#endif /* __KERNEL__ */
-
 #endif /* NFSD_EXPORT_H */
-
diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h
index fa63048f..a93593f1 100644
--- a/include/linux/nfsd/nfsfh.h
+++ b/include/linux/nfsd/nfsfh.h
@@ -10,117 +10,11 @@
  *
  * Copyright (C) 1995, 1996, 1997 Olaf Kirch <okir@monad.swb.de>
  */
-
 #ifndef _LINUX_NFSD_FH_H
 #define _LINUX_NFSD_FH_H
 
-#include <linux/types.h>
-#include <linux/nfs.h>
-#include <linux/nfs2.h>
-#include <linux/nfs3.h>
-#include <linux/nfs4.h>
-#ifdef __KERNEL__
 # include <linux/sunrpc/svc.h>
-#endif
-
-/*
- * This is the old "dentry style" Linux NFSv2 file handle.
- *
- * The xino and xdev fields are currently used to transport the
- * ino/dev of the exported inode.
- */
-struct nfs_fhbase_old {
-	__u32		fb_dcookie;	/* dentry cookie - always 0xfeebbaca */
-	__u32		fb_ino;		/* our inode number */
-	__u32		fb_dirino;	/* dir inode number, 0 for directories */
-	__u32		fb_dev;		/* our device */
-	__u32		fb_xdev;
-	__u32		fb_xino;
-	__u32		fb_generation;
-};
-
-/*
- * This is the new flexible, extensible style NFSv2/v3 file handle.
- * by Neil Brown <neilb@cse.unsw.edu.au> - March 2000
- *
- * The file handle starts with a sequence of four-byte words.
- * The first word contains a version number (1) and three descriptor bytes
- * that tell how the remaining 3 variable length fields should be handled.
- * These three bytes are auth_type, fsid_type and fileid_type.
- *
- * All four-byte values are in host-byte-order.
- *
- * The auth_type field specifies how the filehandle can be authenticated
- * This might allow a file to be confirmed to be in a writable part of a
- * filetree without checking the path from it up to the root.
- * Current values:
- *     0  - No authentication.  fb_auth is 0 bytes long
- * Possible future values:
- *     1  - 4 bytes taken from MD5 hash of the remainer of the file handle
- *          prefixed by a secret and with the important export flags.
- *
- * The fsid_type identifies how the filesystem (or export point) is
- *    encoded.
- *  Current values:
- *     0  - 4 byte device id (ms-2-bytes major, ls-2-bytes minor), 4byte inode number
- *        NOTE: we cannot use the kdev_t device id value, because kdev_t.h
- *              says we mustn't.  We must break it up and reassemble.
- *     1  - 4 byte user specified identifier
- *     2  - 4 byte major, 4 byte minor, 4 byte inode number - DEPRECATED
- *     3  - 4 byte device id, encoded for user-space, 4 byte inode number
- *     4  - 4 byte inode number and 4 byte uuid
- *     5  - 8 byte uuid
- *     6  - 16 byte uuid
- *     7  - 8 byte inode number and 16 byte uuid
- *
- * The fileid_type identified how the file within the filesystem is encoded.
- * This is (will be) passed to, and set by, the underlying filesystem if it supports
- * filehandle operations.  The filesystem must not use the value '0' or '0xff' and may
- * only use the values 1 and 2 as defined below:
- *  Current values:
- *    0   - The root, or export point, of the filesystem.  fb_fileid is 0 bytes.
- *    1   - 32bit inode number, 32 bit generation number.
- *    2   - 32bit inode number, 32 bit generation number, 32 bit parent directory inode number.
- *
- */
-struct nfs_fhbase_new {
-	__u8		fb_version;	/* == 1, even => nfs_fhbase_old */
-	__u8		fb_auth_type;
-	__u8		fb_fsid_type;
-	__u8		fb_fileid_type;
-	__u32		fb_auth[1];
-/*	__u32		fb_fsid[0]; floating */
-/*	__u32		fb_fileid[0]; floating */
-};
-
-struct knfsd_fh {
-	unsigned int	fh_size;	/* significant for NFSv3.
-					 * Points to the current size while building
-					 * a new file handle
-					 */
-	union {
-		struct nfs_fhbase_old	fh_old;
-		__u32			fh_pad[NFS4_FHSIZE/4];
-		struct nfs_fhbase_new	fh_new;
-	} fh_base;
-};
-
-#define ofh_dcookie		fh_base.fh_old.fb_dcookie
-#define ofh_ino			fh_base.fh_old.fb_ino
-#define ofh_dirino		fh_base.fh_old.fb_dirino
-#define ofh_dev			fh_base.fh_old.fb_dev
-#define ofh_xdev		fh_base.fh_old.fb_xdev
-#define ofh_xino		fh_base.fh_old.fb_xino
-#define ofh_generation		fh_base.fh_old.fb_generation
-
-#define	fh_version		fh_base.fh_new.fb_version
-#define	fh_fsid_type		fh_base.fh_new.fb_fsid_type
-#define	fh_auth_type		fh_base.fh_new.fb_auth_type
-#define	fh_fileid_type		fh_base.fh_new.fb_fileid_type
-#define	fh_auth			fh_base.fh_new.fb_auth
-#define	fh_fsid			fh_base.fh_new.fb_auth
-
-#ifdef __KERNEL__
+#include <uapi/linux/nfsd/nfsfh.h>
 
 static inline __u32 ino_t_to_u32(ino_t ino)
 {
@@ -166,7 +60,4 @@
 
 } svc_fh;
 
-#endif /* __KERNEL__ */
-
-
 #endif /* _LINUX_NFSD_FH_H */
diff --git a/include/linux/nfsd/stats.h b/include/linux/nfsd/stats.h
index 2693ef6..e75b254 100644
--- a/include/linux/nfsd/stats.h
+++ b/include/linux/nfsd/stats.h
@@ -5,16 +5,11 @@
  *
  * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
  */
-
 #ifndef LINUX_NFSD_STATS_H
 #define LINUX_NFSD_STATS_H
 
-#include <linux/nfs4.h>
+#include <uapi/linux/nfsd/stats.h>
 
-/* thread usage wraps very million seconds (approx one fortnight) */
-#define	NFSD_USAGE_WRAP	(HZ*1000000)
-
-#ifdef __KERNEL__
 
 struct nfsd_stats {
 	unsigned int	rchits;		/* repcache hits */
@@ -47,5 +42,4 @@
 void	nfsd_stat_init(void);
 void	nfsd_stat_shutdown(void);
 
-#endif /* __KERNEL__ */
 #endif /* LINUX_NFSD_STATS_H */
diff --git a/include/linux/nubus.h b/include/linux/nubus.h
index e137b3c..a8696bb 100644
--- a/include/linux/nubus.h
+++ b/include/linux/nubus.h
@@ -8,236 +8,12 @@
   Some of the constants in here are from the corresponding
   NetBSD/OpenBSD header file, by Allen Briggs.  We figured out the
   rest of them on our own. */
-
 #ifndef LINUX_NUBUS_H
 #define LINUX_NUBUS_H
 
-#include <linux/types.h>
-#ifdef __KERNEL__
 #include <asm/nubus.h>
-#endif
+#include <uapi/linux/nubus.h>
 
-enum nubus_category {
-	NUBUS_CAT_BOARD          = 0x0001,
-	NUBUS_CAT_DISPLAY        = 0x0003,
-	NUBUS_CAT_NETWORK        = 0x0004,
-	NUBUS_CAT_COMMUNICATIONS = 0x0006,
-	NUBUS_CAT_FONT           = 0x0009,
-	NUBUS_CAT_CPU            = 0x000A,
-	/* For lack of a better name */
-	NUBUS_CAT_DUODOCK        = 0x0020
-};
-
-enum nubus_type_network {
-	NUBUS_TYPE_ETHERNET      = 0x0001,
-	NUBUS_TYPE_RS232         = 0x0002
-};
-
-enum nubus_type_display {
-	NUBUS_TYPE_VIDEO         = 0x0001
-};
-
-enum nubus_type_cpu {
-	NUBUS_TYPE_68020         = 0x0003,
-	NUBUS_TYPE_68030         = 0x0004,
-	NUBUS_TYPE_68040         = 0x0005
-};
-
-/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots)
- *  68030 motherboards: <10,4,0,24>
- *  68040 motherboards: <10,5,0,24>
- *  DuoDock Plus: <32,1,1,2>
- *
- *  Toby Frame Buffer card: <3,1,1,1>
- *  RBV built-in video (IIci): <3,1,1,24>
- *  Valkyrie built-in video (Q630): <3,1,1,46>
- *  Macintosh Display Card: <3,1,1,25>
- *  Sonora built-in video (P460): <3,1,1,34>
- *  Jet framebuffer (DuoDock Plus): <3,1,1,41>
- *
- *  SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272>
- *  SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271>
- *  Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281>
- *  Sonic Systems Ethernet A-Series Card: <4,1,268,256>
- *  Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision)
- *   ROM on the above card: <2,1,0,0>
- *  Cabletron ethernet card: <4,1,1,265>
- *  Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card)
- *  Kinetics EtherPort IIN: <4,1,259,262>
- *  API Engineering EtherRun_LCa PDS enet card: <4,1,282,256>
- *
- *  Add your devices to the list!  You can obtain the "Slots" utility
- *  from Apple's FTP site at:
- *  ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/
- *
- *  Alternately, TattleTech can be found at any Info-Mac mirror site.  
- *  or from its distribution site: ftp://ftp.decismkr.com/dms
- */
-
-/* DrSW: Uniquely identifies the software interface to a board.  This
-   is usually the one you want to look at when writing a driver.  It's
-   not as useful as you think, though, because as we should know by
-   now (duh), "Apple Compatible" can mean a lot of things... */
-
-/* Add known DrSW values here */
-enum nubus_drsw {
-	/* NUBUS_CAT_DISPLAY */
-	NUBUS_DRSW_APPLE        = 0x0001,
-	NUBUS_DRSW_APPLE_HIRES  = 0x0013, /* MacII HiRes card driver */
-	
-	/* NUBUS_CAT_NETWORK */
-	NUBUS_DRSW_3COM         = 0x0000,
-	NUBUS_DRSW_CABLETRON    = 0x0001,
-	NUBUS_DRSW_SONIC_LC     = 0x0001,
-	NUBUS_DRSW_KINETICS     = 0x0103,
-	NUBUS_DRSW_ASANTE       = 0x0104,
-	NUBUS_DRSW_TECHWORKS    = 0x0109,
-	NUBUS_DRSW_DAYNA        = 0x010b,
-	NUBUS_DRSW_FARALLON     = 0x010c,
-	NUBUS_DRSW_APPLE_SN     = 0x010f,
-	NUBUS_DRSW_DAYNA2       = 0x0115,
-	NUBUS_DRSW_FOCUS        = 0x011a,
-	NUBUS_DRSW_ASANTE_CS    = 0x011d, /* use asante SMC9194 driver */
-	NUBUS_DRSW_DAYNA_LC     = 0x011e,
-
-	/* NUBUS_CAT_CPU */
-	NUBUS_DRSW_NONE         = 0x0000,
-};
-
-/* DrHW: Uniquely identifies the hardware interface to a board (or at
-   least, it should...  some video cards are known to incorrectly
-   identify themselves as Toby cards) */
-
-/* Add known DrHW values here */
-enum nubus_drhw {
-	/* NUBUS_CAT_DISPLAY */
-	NUBUS_DRHW_APPLE_TFB      = 0x0001, /* Toby frame buffer card */
-	NUBUS_DRHW_APPLE_WVC      = 0x0006, /* Apple Workstation Video Card */
-	NUBUS_DRHW_SIGMA_CLRMAX   = 0x0007, /* Sigma Design ColorMax */
-	NUBUS_DRHW_APPLE_SE30     = 0x0009, /* Apple SE/30 video */
-	NUBUS_DRHW_APPLE_HRVC     = 0x0013, /* Mac II High-Res Video Card */
-	NUBUS_DRHW_APPLE_PVC      = 0x0017, /* Mac II Portrait Video Card */
-	NUBUS_DRHW_APPLE_RBV1     = 0x0018, /* IIci RBV video */
-	NUBUS_DRHW_APPLE_MDC      = 0x0019, /* Macintosh Display Card */
-	NUBUS_DRHW_APPLE_SONORA   = 0x0022, /* Sonora built-in video */
-	NUBUS_DRHW_APPLE_24AC     = 0x002b, /* Mac 24AC Video Card */
-	NUBUS_DRHW_APPLE_VALKYRIE = 0x002e,
-	NUBUS_DRHW_APPLE_JET      = 0x0029, /* Jet framebuffer (DuoDock) */
-	NUBUS_DRHW_SMAC_GFX       = 0x0105, /* SuperMac GFX */
-	NUBUS_DRHW_RASTER_CB264   = 0x013B, /* RasterOps ColorBoard 264 */
-	NUBUS_DRHW_MICRON_XCEED   = 0x0146, /* Micron Exceed color */
-	NUBUS_DRHW_RDIUS_GSC      = 0x0153, /* Radius GS/C */
-	NUBUS_DRHW_SMAC_SPEC8     = 0x017B, /* SuperMac Spectrum/8 */
-	NUBUS_DRHW_SMAC_SPEC24    = 0x017C, /* SuperMac Spectrum/24 */
-	NUBUS_DRHW_RASTER_CB364   = 0x026F, /* RasterOps ColorBoard 364 */
-	NUBUS_DRHW_RDIUS_DCGX     = 0x027C, /* Radius DirectColor/GX */
-	NUBUS_DRHW_RDIUS_PC8      = 0x0291, /* Radius PrecisionColor 8 */
-	NUBUS_DRHW_LAPIS_PCS8     = 0x0292, /* Lapis ProColorServer 8 */
-	NUBUS_DRHW_RASTER_24XLI   = 0x02A0, /* RasterOps 8/24 XLi */
-	NUBUS_DRHW_RASTER_PBPGT   = 0x02A5, /* RasterOps PaintBoard Prism GT */
-	NUBUS_DRHW_EMACH_FSX      = 0x02AE, /* E-Machines Futura SX */
-	NUBUS_DRHW_RASTER_24XLTV  = 0x02B7, /* RasterOps 24XLTV */
-	NUBUS_DRHW_SMAC_THUND24   = 0x02CB, /* SuperMac Thunder/24 */
-	NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */
-	NUBUS_DRHW_RDIUS_PC24XP   = 0x0406, /* Radius PrecisionColor 24Xp */
-	NUBUS_DRHW_RDIUS_PC24X    = 0x040A, /* Radius PrecisionColor 24X */
-	NUBUS_DRHW_RDIUS_PC8XJ    = 0x040B, /* Radius PrecisionColor 8XJ */
-	
-	/* NUBUS_CAT_NETWORK */
-	NUBUS_DRHW_INTERLAN       = 0x0100,
-	NUBUS_DRHW_SMC9194        = 0x0101,
-	NUBUS_DRHW_KINETICS       = 0x0106,
-	NUBUS_DRHW_CABLETRON      = 0x0109,
-	NUBUS_DRHW_ASANTE_LC      = 0x010f,
-	NUBUS_DRHW_SONIC          = 0x0110,
-	NUBUS_DRHW_TECHWORKS      = 0x0112,
-	NUBUS_DRHW_APPLE_SONIC_NB = 0x0118,
-	NUBUS_DRHW_APPLE_SONIC_LC = 0x0119,
-	NUBUS_DRHW_FOCUS          = 0x011c,
-	NUBUS_DRHW_SONNET         = 0x011d,
-};
-
-/* Resource IDs: These are the identifiers for the various weird and
-   wonderful tidbits of information that may or may not reside in the
-   NuBus ROM directory. */
-enum nubus_res_id {
-	NUBUS_RESID_TYPE         = 0x0001,
-	NUBUS_RESID_NAME         = 0x0002,
-	NUBUS_RESID_ICON         = 0x0003,
-	NUBUS_RESID_DRVRDIR      = 0x0004,
-	NUBUS_RESID_LOADREC      = 0x0005,
-	NUBUS_RESID_BOOTREC      = 0x0006,
-	NUBUS_RESID_FLAGS        = 0x0007,
-	NUBUS_RESID_HWDEVID      = 0x0008,
-	NUBUS_RESID_MINOR_BASEOS = 0x000a,
-	NUBUS_RESID_MINOR_LENGTH = 0x000b,
-	NUBUS_RESID_MAJOR_BASEOS = 0x000c,
-	NUBUS_RESID_MAJOR_LENGTH = 0x000d,
-	NUBUS_RESID_CICN         = 0x000f,
-	NUBUS_RESID_ICL8         = 0x0010,
-	NUBUS_RESID_ICL4         = 0x0011,
-};
-
-/* Category-specific resources. */
-enum nubus_board_res_id {
-	NUBUS_RESID_BOARDID      = 0x0020,
-	NUBUS_RESID_PRAMINITDATA = 0x0021,
-	NUBUS_RESID_PRIMARYINIT  = 0x0022,
-	NUBUS_RESID_TIMEOUTCONST = 0x0023,
-	NUBUS_RESID_VENDORINFO   = 0x0024,
-	NUBUS_RESID_BOARDFLAGS   = 0x0025,
-	NUBUS_RESID_SECONDINIT   = 0x0026,
-
-	/* Not sure why Apple put these next two in here */
-	NUBUS_RESID_VIDNAMES     = 0x0041,
-	NUBUS_RESID_VIDMODES     = 0x007e
-};
-
-/* Fields within the vendor info directory */
-enum nubus_vendor_res_id {
-	NUBUS_RESID_VEND_ID     = 0x0001,
-	NUBUS_RESID_VEND_SERIAL = 0x0002,
-	NUBUS_RESID_VEND_REV    = 0x0003,
-	NUBUS_RESID_VEND_PART   = 0x0004,
-	NUBUS_RESID_VEND_DATE   = 0x0005
-};
-
-enum nubus_net_res_id {
-	NUBUS_RESID_MAC_ADDRESS  = 0x0080
-};
-
-enum nubus_cpu_res_id {
-	NUBUS_RESID_MEMINFO      = 0x0081,
-	NUBUS_RESID_ROMINFO      = 0x0082
-};
-
-enum nubus_display_res_id {
-	NUBUS_RESID_GAMMADIR    = 0x0040,
-	NUBUS_RESID_FIRSTMODE   = 0x0080,
-	NUBUS_RESID_SECONDMODE  = 0x0081,
-	NUBUS_RESID_THIRDMODE   = 0x0082,
-	NUBUS_RESID_FOURTHMODE  = 0x0083,
-	NUBUS_RESID_FIFTHMODE   = 0x0084,
-	NUBUS_RESID_SIXTHMODE   = 0x0085
-};
-
-struct nubus_dir
-{
-	unsigned char *base;
-	unsigned char *ptr;
-	int done;
-	int mask;
-};
-
-struct nubus_dirent
-{
-	unsigned char *base;
-	unsigned char type;
-	__u32 data;	/* Actually 24bits used */
-	int mask;
-};
-
-#ifdef __KERNEL__
 struct nubus_board {
 	struct nubus_board* next;
 	struct nubus_dev* first_dev;
@@ -352,12 +128,4 @@
 void nubus_get_rsrc_str(void* dest,
 			const struct nubus_dirent *dirent,
 			int maxlen);
-#endif /* __KERNEL__ */
-
-/* We'd like to get rid of this eventually.  Only daynaport.c uses it now. */
-static inline void *nubus_slot_addr(int slot)
-{
-	return (void *)(0xF0000000|(slot<<24));
-}
-
 #endif /* LINUX_NUBUS_H */
diff --git a/include/linux/nvram.h b/include/linux/nvram.h
index 9189829..cf0ff55 100644
--- a/include/linux/nvram.h
+++ b/include/linux/nvram.h
@@ -1,18 +1,8 @@
 #ifndef _LINUX_NVRAM_H
 #define _LINUX_NVRAM_H
 
-#include <linux/ioctl.h>
+#include <uapi/linux/nvram.h>
 
-/* /dev/nvram ioctls */
-#define NVRAM_INIT	_IO('p', 0x40) /* initialize NVRAM and set checksum */
-#define NVRAM_SETCKS	_IO('p', 0x41) /* recalculate checksum */
-
-/* for all current systems, this is where NVRAM starts */
-#define NVRAM_FIRST_BYTE    14
-/* all these functions expect an NVRAM offset, not an absolute */
-#define NVRAM_OFFSET(x)   ((x)-NVRAM_FIRST_BYTE)
-
-#ifdef __KERNEL__
 /* __foo is foo without grabbing the rtc_lock - get it yourself */
 extern unsigned char __nvram_read_byte(int i);
 extern unsigned char nvram_read_byte(int i);
@@ -20,6 +10,4 @@
 extern void nvram_write_byte(unsigned char c, int i);
 extern int __nvram_check_checksum(void);
 extern int nvram_check_checksum(void);
-#endif
-
 #endif  /* _LINUX_NVRAM_H */
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index 6ef49b8..8163107 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -26,32 +26,32 @@
 extern struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np);
 
 #else /* CONFIG_OF */
-int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
+static inline int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 {
 	return -ENOSYS;
 }
 
-struct phy_device *of_phy_find_device(struct device_node *phy_np)
+static inline struct phy_device *of_phy_find_device(struct device_node *phy_np)
 {
 	return NULL;
 }
 
-struct phy_device *of_phy_connect(struct net_device *dev,
-					 struct device_node *phy_np,
-					 void (*hndlr)(struct net_device *),
-					 u32 flags, phy_interface_t iface)
+static inline struct phy_device *of_phy_connect(struct net_device *dev,
+						struct device_node *phy_np,
+						void (*hndlr)(struct net_device *),
+						u32 flags, phy_interface_t iface)
 {
 	return NULL;
 }
 
-struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
-					 void (*hndlr)(struct net_device *),
-					 phy_interface_t iface)
+static inline struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+							   void (*hndlr)(struct net_device *),
+							   phy_interface_t iface)
 {
 	return NULL;
 }
 
-struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np)
+static inline struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np)
 {
 	return NULL;
 }
diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
index 85af818..d1f4dcc 100644
--- a/include/linux/omapfb.h
+++ b/include/linux/omapfb.h
@@ -20,205 +20,11 @@
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
-
 #ifndef __LINUX_OMAPFB_H__
 #define __LINUX_OMAPFB_H__
 
-#include <linux/fb.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
+#include <uapi/linux/omapfb.h>
 
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
-#define OMAP_IO(num)		_IO('O', num)
-
-#define OMAPFB_MIRROR		OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX		OMAP_IO(37)
-#define OMAPFB_VSYNC		OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
-#define OMAPFB_WAITFORVSYNC	OMAP_IO(57)
-#define OMAPFB_MEMORY_READ	OMAP_IOR(58, struct omapfb_memory_read)
-#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
-#define OMAPFB_WAITFORGO	OMAP_IO(60)
-#define OMAPFB_GET_VRAM_INFO	OMAP_IOR(61, struct omapfb_vram_info)
-#define OMAPFB_SET_TEARSYNC	OMAP_IOW(62, struct omapfb_tearsync_info)
-#define OMAPFB_GET_DISPLAY_INFO	OMAP_IOR(63, struct omapfb_display_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK		0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
-#define OMAPFB_CAPS_TEARSYNC		0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
-#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
-#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK		0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
-
-#define OMAPFB_MEMTYPE_SDRAM		0
-#define OMAPFB_MEMTYPE_SRAM		1
-#define OMAPFB_MEMTYPE_MAX		1
-
-#define OMAPFB_MEM_IDX_ENABLED	0x80
-#define OMAPFB_MEM_IDX_MASK	0x7f
-
-enum omapfb_color_format {
-	OMAPFB_COLOR_RGB565 = 0,
-	OMAPFB_COLOR_YUV422,
-	OMAPFB_COLOR_YUV420,
-	OMAPFB_COLOR_CLUT_8BPP,
-	OMAPFB_COLOR_CLUT_4BPP,
-	OMAPFB_COLOR_CLUT_2BPP,
-	OMAPFB_COLOR_CLUT_1BPP,
-	OMAPFB_COLOR_RGB444,
-	OMAPFB_COLOR_YUY422,
-
-	OMAPFB_COLOR_ARGB16,
-	OMAPFB_COLOR_RGB24U,	/* RGB24, 32-bit container */
-	OMAPFB_COLOR_RGB24P,	/* RGB24, 24-bit container */
-	OMAPFB_COLOR_ARGB32,
-	OMAPFB_COLOR_RGBA32,
-	OMAPFB_COLOR_RGBX32,
-};
-
-struct omapfb_update_window {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-	__u32 out_x, out_y;
-	__u32 out_width, out_height;
-	__u32 reserved[8];
-};
-
-struct omapfb_update_window_old {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-};
-
-enum omapfb_plane {
-	OMAPFB_PLANE_GFX = 0,
-	OMAPFB_PLANE_VID1,
-	OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
-	OMAPFB_CHANNEL_OUT_LCD = 0,
-	OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
-	__u32 pos_x;
-	__u32 pos_y;
-	__u8  enabled;
-	__u8  channel_out;
-	__u8  mirror;
-	__u8  mem_idx;
-	__u32 out_width;
-	__u32 out_height;
-	__u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
-	__u32 size;
-	__u8  type;
-	__u8  reserved[3];
-};
-
-struct omapfb_caps {
-	__u32 ctrl;
-	__u32 plane_color;
-	__u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
-	OMAPFB_COLOR_KEY_DISABLED = 0,
-	OMAPFB_COLOR_KEY_GFX_DST,
-	OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
-	__u8  channel_out;
-	__u32 background;
-	__u32 trans_key;
-	__u8  key_type;
-};
-
-enum omapfb_update_mode {
-	OMAPFB_UPDATE_DISABLED = 0,
-	OMAPFB_AUTO_UPDATE,
-	OMAPFB_MANUAL_UPDATE
-};
-
-struct omapfb_memory_read {
-	__u16 x;
-	__u16 y;
-	__u16 w;
-	__u16 h;
-	size_t buffer_size;
-	void __user *buffer;
-};
-
-struct omapfb_ovl_colormode {
-	__u8 overlay_idx;
-	__u8 mode_idx;
-	__u32 bits_per_pixel;
-	__u32 nonstd;
-	struct fb_bitfield red;
-	struct fb_bitfield green;
-	struct fb_bitfield blue;
-	struct fb_bitfield transp;
-};
-
-struct omapfb_vram_info {
-	__u32 total;
-	__u32 free;
-	__u32 largest_free_block;
-	__u32 reserved[5];
-};
-
-struct omapfb_tearsync_info {
-	__u8 enabled;
-	__u8 reserved1[3];
-	__u16 line;
-	__u16 reserved2;
-};
-
-struct omapfb_display_info {
-	__u16 xres;
-	__u16 yres;
-	__u32 width;	/* phys width of the display in micrometers */
-	__u32 height;	/* phys height of the display in micrometers */
-	__u32 reserved[5];
-};
-
-#ifdef __KERNEL__
 
 struct omap_lcd_config {
 	char panel_name[16];
@@ -233,6 +39,4 @@
 
 void __init omapfb_set_lcd_config(const struct omap_lcd_config *config);
 
-#endif
-
 #endif /* __OMAPFB_H */
diff --git a/include/linux/oom.h b/include/linux/oom.h
index d36a822..fb98268 100644
--- a/include/linux/oom.h
+++ b/include/linux/oom.h
@@ -1,18 +1,11 @@
 #ifndef __INCLUDE_LINUX_OOM_H
 #define __INCLUDE_LINUX_OOM_H
 
-/*
- * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for
- * pid.
- */
-#define OOM_SCORE_ADJ_MIN	(-1000)
-#define OOM_SCORE_ADJ_MAX	1000
-
-#ifdef __KERNEL__
 
 #include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/nodemask.h>
+#include <uapi/linux/oom.h>
 
 struct zonelist;
 struct notifier_block;
@@ -82,5 +75,4 @@
 extern int sysctl_oom_dump_tasks;
 extern int sysctl_oom_kill_allocating_task;
 extern int sysctl_panic_on_oom;
-#endif /* __KERNEL__*/
 #endif /* _INCLUDE_LINUX_OOM_H */
diff --git a/include/linux/parport.h b/include/linux/parport.h
index 106c2ca..c22f125 100644
--- a/include/linux/parport.h
+++ b/include/linux/parport.h
@@ -3,96 +3,9 @@
  * the GNU Free Documentation License, Version 1.1 or any later version
  * published by the Free Software Foundation.
  */
-
 #ifndef _PARPORT_H_
 #define _PARPORT_H_
 
-/* Start off with user-visible constants */
-
-/* Maximum of 16 ports per machine */
-#define PARPORT_MAX  16
-
-/* Magic numbers */
-#define PARPORT_IRQ_NONE  -1
-#define PARPORT_DMA_NONE  -1
-#define PARPORT_IRQ_AUTO  -2
-#define PARPORT_DMA_AUTO  -2
-#define PARPORT_DMA_NOFIFO -3
-#define PARPORT_DISABLE   -2
-#define PARPORT_IRQ_PROBEONLY -3
-#define PARPORT_IOHI_AUTO -1
-
-#define PARPORT_CONTROL_STROBE    0x1
-#define PARPORT_CONTROL_AUTOFD    0x2
-#define PARPORT_CONTROL_INIT      0x4
-#define PARPORT_CONTROL_SELECT    0x8
-
-#define PARPORT_STATUS_ERROR      0x8
-#define PARPORT_STATUS_SELECT     0x10
-#define PARPORT_STATUS_PAPEROUT   0x20
-#define PARPORT_STATUS_ACK        0x40
-#define PARPORT_STATUS_BUSY       0x80
-
-/* Type classes for Plug-and-Play probe.  */
-typedef enum {
-	PARPORT_CLASS_LEGACY = 0,       /* Non-IEEE1284 device */
-	PARPORT_CLASS_PRINTER,
-	PARPORT_CLASS_MODEM,
-	PARPORT_CLASS_NET,
-	PARPORT_CLASS_HDC,              /* Hard disk controller */
-	PARPORT_CLASS_PCMCIA,
-	PARPORT_CLASS_MEDIA,            /* Multimedia device */
-	PARPORT_CLASS_FDC,              /* Floppy disk controller */
-	PARPORT_CLASS_PORTS,
-	PARPORT_CLASS_SCANNER,
-	PARPORT_CLASS_DIGCAM,
-	PARPORT_CLASS_OTHER,            /* Anything else */
-	PARPORT_CLASS_UNSPEC,           /* No CLS field in ID */
-	PARPORT_CLASS_SCSIADAPTER
-} parport_device_class;
-
-/* The "modes" entry in parport is a bit field representing the
-   capabilities of the hardware. */
-#define PARPORT_MODE_PCSPP	(1<<0) /* IBM PC registers available. */
-#define PARPORT_MODE_TRISTATE	(1<<1) /* Can tristate. */
-#define PARPORT_MODE_EPP	(1<<2) /* Hardware EPP. */
-#define PARPORT_MODE_ECP	(1<<3) /* Hardware ECP. */
-#define PARPORT_MODE_COMPAT	(1<<4) /* Hardware 'printer protocol'. */
-#define PARPORT_MODE_DMA	(1<<5) /* Hardware can DMA. */
-#define PARPORT_MODE_SAFEININT	(1<<6) /* SPP registers accessible in IRQ. */
-
-/* IEEE1284 modes: 
-   Nibble mode, byte mode, ECP, ECPRLE and EPP are their own
-   'extensibility request' values.  Others are special.
-   'Real' ECP modes must have the IEEE1284_MODE_ECP bit set.  */
-#define IEEE1284_MODE_NIBBLE             0
-#define IEEE1284_MODE_BYTE              (1<<0)
-#define IEEE1284_MODE_COMPAT            (1<<8)
-#define IEEE1284_MODE_BECP              (1<<9) /* Bounded ECP mode */
-#define IEEE1284_MODE_ECP               (1<<4)
-#define IEEE1284_MODE_ECPRLE            (IEEE1284_MODE_ECP | (1<<5))
-#define IEEE1284_MODE_ECPSWE            (1<<10) /* Software-emulated */
-#define IEEE1284_MODE_EPP               (1<<6)
-#define IEEE1284_MODE_EPPSL             (1<<11) /* EPP 1.7 */
-#define IEEE1284_MODE_EPPSWE            (1<<12) /* Software-emulated */
-#define IEEE1284_DEVICEID               (1<<2)  /* This is a flag */
-#define IEEE1284_EXT_LINK               (1<<14) /* This flag causes the
-						 * extensibility link to
-						 * be requested, using
-						 * bits 0-6. */
-
-/* For the benefit of parport_read/write, you can use these with
- * parport_negotiate to use address operations.  They have no effect
- * other than to make parport_read/write use address transfers. */
-#define IEEE1284_ADDR			(1<<13)	/* This is a flag */
-#define IEEE1284_DATA			 0	/* So is this */
-
-/* Flags for block transfer operations. */
-#define PARPORT_EPP_FAST		(1<<0) /* Unreliable counts. */
-#define PARPORT_W91284PIC		(1<<1) /* have a Warp9 w91284pic in the device */
-
-/* The rest is for the kernel only */
-#ifdef __KERNEL__
 
 #include <linux/jiffies.h>
 #include <linux/proc_fs.h>
@@ -101,6 +14,7 @@
 #include <linux/irqreturn.h>
 #include <linux/semaphore.h>
 #include <asm/ptrace.h>
+#include <uapi/linux/parport.h>
 
 /* Define this later. */
 struct parport;
@@ -564,5 +478,4 @@
 extern unsigned long parport_default_timeslice;
 extern int parport_default_spintime;
 
-#endif /* __KERNEL__ */
 #endif /* _PARPORT_H_ */
diff --git a/include/linux/patchkey.h b/include/linux/patchkey.h
index aefda0e..97a919f 100644
--- a/include/linux/patchkey.h
+++ b/include/linux/patchkey.h
@@ -9,22 +9,12 @@
  * Do not include this file directly.  Please use <sys/soundcard.h> instead.
  * For kernel code, use <linux/soundcard.h>
  */
-
-#ifndef _LINUX_PATCHKEY_H_INDIRECT
-#error "patchkey.h included directly"
-#endif
-
 #ifndef _LINUX_PATCHKEY_H
 #define _LINUX_PATCHKEY_H
 
-/* Endian macros. */
-#ifdef __KERNEL__
 #  include <asm/byteorder.h>
-#else
-#  include <endian.h>
-#endif
+#include <uapi/linux/patchkey.h>
 
-#if defined(__KERNEL__)
 #  if defined(__BIG_ENDIAN)
 #    define _PATCHKEY(id) (0xfd00|id)
 #  elif defined(__LITTLE_ENDIAN)
@@ -32,16 +22,4 @@
 #  else
 #    error "could not determine byte order"
 #  endif
-#else
-#if defined(__BYTE_ORDER)
-#  if __BYTE_ORDER == __BIG_ENDIAN
-#    define _PATCHKEY(id) (0xfd00|id)
-#  elif __BYTE_ORDER == __LITTLE_ENDIAN
-#    define _PATCHKEY(id) ((id<<8)|0x00fd)
-#  else
-#    error "could not determine byte order"
-#  endif
-#endif
-#endif
-
 #endif /* _LINUX_PATCHKEY_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index be1de01..ee21795 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -13,32 +13,9 @@
  *	PCI to PCI Bridge Specification
  *	PCI System Design Guide
  */
-
 #ifndef LINUX_PCI_H
 #define LINUX_PCI_H
 
-#include <linux/pci_regs.h>	/* The pci register defines */
-
-/*
- * The PCI interface treats multi-function devices as independent
- * devices.  The slot/function address of each device is encoded
- * in a single byte as follows:
- *
- *	7:3 = slot
- *	2:0 = function
- */
-#define PCI_DEVFN(slot, func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
-#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)
-#define PCI_FUNC(devfn)		((devfn) & 0x07)
-
-/* Ioctls for /proc/bus/pci/X/Y nodes. */
-#define PCIIOC_BASE		('P' << 24 | 'C' << 16 | 'I' << 8)
-#define PCIIOC_CONTROLLER	(PCIIOC_BASE | 0x00)	/* Get controller for PCI device. */
-#define PCIIOC_MMAP_IS_IO	(PCIIOC_BASE | 0x01)	/* Set mmap state to I/O space. */
-#define PCIIOC_MMAP_IS_MEM	(PCIIOC_BASE | 0x02)	/* Set mmap state to MEM space. */
-#define PCIIOC_WRITE_COMBINE	(PCIIOC_BASE | 0x03)	/* Enable/disable write-combining. */
-
-#ifdef __KERNEL__
 
 #include <linux/mod_devicetable.h>
 
@@ -53,6 +30,7 @@
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/irqreturn.h>
+#include <uapi/linux/pci.h>
 
 /* Include the ID list */
 #include <linux/pci_ids.h>
@@ -1831,5 +1809,4 @@
  */
 struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
 
-#endif /* __KERNEL__ */
 #endif /* LINUX_PCI_H */
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 599afc4..2e90235 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -14,605 +14,8 @@
 #ifndef _LINUX_PERF_EVENT_H
 #define _LINUX_PERF_EVENT_H
 
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <asm/byteorder.h>
-
-/*
- * User-space ABI bits:
- */
-
-/*
- * attr.type
- */
-enum perf_type_id {
-	PERF_TYPE_HARDWARE			= 0,
-	PERF_TYPE_SOFTWARE			= 1,
-	PERF_TYPE_TRACEPOINT			= 2,
-	PERF_TYPE_HW_CACHE			= 3,
-	PERF_TYPE_RAW				= 4,
-	PERF_TYPE_BREAKPOINT			= 5,
-
-	PERF_TYPE_MAX,				/* non-ABI */
-};
-
-/*
- * Generalized performance event event_id types, used by the
- * attr.event_id parameter of the sys_perf_event_open()
- * syscall:
- */
-enum perf_hw_id {
-	/*
-	 * Common hardware events, generalized by the kernel:
-	 */
-	PERF_COUNT_HW_CPU_CYCLES		= 0,
-	PERF_COUNT_HW_INSTRUCTIONS		= 1,
-	PERF_COUNT_HW_CACHE_REFERENCES		= 2,
-	PERF_COUNT_HW_CACHE_MISSES		= 3,
-	PERF_COUNT_HW_BRANCH_INSTRUCTIONS	= 4,
-	PERF_COUNT_HW_BRANCH_MISSES		= 5,
-	PERF_COUNT_HW_BUS_CYCLES		= 6,
-	PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	= 7,
-	PERF_COUNT_HW_STALLED_CYCLES_BACKEND	= 8,
-	PERF_COUNT_HW_REF_CPU_CYCLES		= 9,
-
-	PERF_COUNT_HW_MAX,			/* non-ABI */
-};
-
-/*
- * Generalized hardware cache events:
- *
- *       { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
- *       { read, write, prefetch } x
- *       { accesses, misses }
- */
-enum perf_hw_cache_id {
-	PERF_COUNT_HW_CACHE_L1D			= 0,
-	PERF_COUNT_HW_CACHE_L1I			= 1,
-	PERF_COUNT_HW_CACHE_LL			= 2,
-	PERF_COUNT_HW_CACHE_DTLB		= 3,
-	PERF_COUNT_HW_CACHE_ITLB		= 4,
-	PERF_COUNT_HW_CACHE_BPU			= 5,
-	PERF_COUNT_HW_CACHE_NODE		= 6,
-
-	PERF_COUNT_HW_CACHE_MAX,		/* non-ABI */
-};
-
-enum perf_hw_cache_op_id {
-	PERF_COUNT_HW_CACHE_OP_READ		= 0,
-	PERF_COUNT_HW_CACHE_OP_WRITE		= 1,
-	PERF_COUNT_HW_CACHE_OP_PREFETCH		= 2,
-
-	PERF_COUNT_HW_CACHE_OP_MAX,		/* non-ABI */
-};
-
-enum perf_hw_cache_op_result_id {
-	PERF_COUNT_HW_CACHE_RESULT_ACCESS	= 0,
-	PERF_COUNT_HW_CACHE_RESULT_MISS		= 1,
-
-	PERF_COUNT_HW_CACHE_RESULT_MAX,		/* non-ABI */
-};
-
-/*
- * Special "software" events provided by the kernel, even if the hardware
- * does not support performance events. These events measure various
- * physical and sw events of the kernel (and allow the profiling of them as
- * well):
- */
-enum perf_sw_ids {
-	PERF_COUNT_SW_CPU_CLOCK			= 0,
-	PERF_COUNT_SW_TASK_CLOCK		= 1,
-	PERF_COUNT_SW_PAGE_FAULTS		= 2,
-	PERF_COUNT_SW_CONTEXT_SWITCHES		= 3,
-	PERF_COUNT_SW_CPU_MIGRATIONS		= 4,
-	PERF_COUNT_SW_PAGE_FAULTS_MIN		= 5,
-	PERF_COUNT_SW_PAGE_FAULTS_MAJ		= 6,
-	PERF_COUNT_SW_ALIGNMENT_FAULTS		= 7,
-	PERF_COUNT_SW_EMULATION_FAULTS		= 8,
-
-	PERF_COUNT_SW_MAX,			/* non-ABI */
-};
-
-/*
- * Bits that can be set in attr.sample_type to request information
- * in the overflow packets.
- */
-enum perf_event_sample_format {
-	PERF_SAMPLE_IP				= 1U << 0,
-	PERF_SAMPLE_TID				= 1U << 1,
-	PERF_SAMPLE_TIME			= 1U << 2,
-	PERF_SAMPLE_ADDR			= 1U << 3,
-	PERF_SAMPLE_READ			= 1U << 4,
-	PERF_SAMPLE_CALLCHAIN			= 1U << 5,
-	PERF_SAMPLE_ID				= 1U << 6,
-	PERF_SAMPLE_CPU				= 1U << 7,
-	PERF_SAMPLE_PERIOD			= 1U << 8,
-	PERF_SAMPLE_STREAM_ID			= 1U << 9,
-	PERF_SAMPLE_RAW				= 1U << 10,
-	PERF_SAMPLE_BRANCH_STACK		= 1U << 11,
-	PERF_SAMPLE_REGS_USER			= 1U << 12,
-	PERF_SAMPLE_STACK_USER			= 1U << 13,
-
-	PERF_SAMPLE_MAX = 1U << 14,		/* non-ABI */
-};
-
-/*
- * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
- *
- * If the user does not pass priv level information via branch_sample_type,
- * the kernel uses the event's priv level. Branch and event priv levels do
- * not have to match. Branch priv level is checked for permissions.
- *
- * The branch types can be combined, however BRANCH_ANY covers all types
- * of branches and therefore it supersedes all the other types.
- */
-enum perf_branch_sample_type {
-	PERF_SAMPLE_BRANCH_USER		= 1U << 0, /* user branches */
-	PERF_SAMPLE_BRANCH_KERNEL	= 1U << 1, /* kernel branches */
-	PERF_SAMPLE_BRANCH_HV		= 1U << 2, /* hypervisor branches */
-
-	PERF_SAMPLE_BRANCH_ANY		= 1U << 3, /* any branch types */
-	PERF_SAMPLE_BRANCH_ANY_CALL	= 1U << 4, /* any call branch */
-	PERF_SAMPLE_BRANCH_ANY_RETURN	= 1U << 5, /* any return branch */
-	PERF_SAMPLE_BRANCH_IND_CALL	= 1U << 6, /* indirect calls */
-
-	PERF_SAMPLE_BRANCH_MAX		= 1U << 7, /* non-ABI */
-};
-
-#define PERF_SAMPLE_BRANCH_PLM_ALL \
-	(PERF_SAMPLE_BRANCH_USER|\
-	 PERF_SAMPLE_BRANCH_KERNEL|\
-	 PERF_SAMPLE_BRANCH_HV)
-
-/*
- * Values to determine ABI of the registers dump.
- */
-enum perf_sample_regs_abi {
-	PERF_SAMPLE_REGS_ABI_NONE	= 0,
-	PERF_SAMPLE_REGS_ABI_32		= 1,
-	PERF_SAMPLE_REGS_ABI_64		= 2,
-};
-
-/*
- * The format of the data returned by read() on a perf event fd,
- * as specified by attr.read_format:
- *
- * struct read_format {
- *	{ u64		value;
- *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
- *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
- *	  { u64		id;           } && PERF_FORMAT_ID
- *	} && !PERF_FORMAT_GROUP
- *
- *	{ u64		nr;
- *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
- *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
- *	  { u64		value;
- *	    { u64	id;           } && PERF_FORMAT_ID
- *	  }		cntr[nr];
- *	} && PERF_FORMAT_GROUP
- * };
- */
-enum perf_event_read_format {
-	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
-	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
-	PERF_FORMAT_ID				= 1U << 2,
-	PERF_FORMAT_GROUP			= 1U << 3,
-
-	PERF_FORMAT_MAX = 1U << 4,		/* non-ABI */
-};
-
-#define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
-#define PERF_ATTR_SIZE_VER1	72	/* add: config2 */
-#define PERF_ATTR_SIZE_VER2	80	/* add: branch_sample_type */
-#define PERF_ATTR_SIZE_VER3	96	/* add: sample_regs_user */
-					/* add: sample_stack_user */
-
-/*
- * Hardware event_id to monitor via a performance monitoring event:
- */
-struct perf_event_attr {
-
-	/*
-	 * Major type: hardware/software/tracepoint/etc.
-	 */
-	__u32			type;
-
-	/*
-	 * Size of the attr structure, for fwd/bwd compat.
-	 */
-	__u32			size;
-
-	/*
-	 * Type specific configuration information.
-	 */
-	__u64			config;
-
-	union {
-		__u64		sample_period;
-		__u64		sample_freq;
-	};
-
-	__u64			sample_type;
-	__u64			read_format;
-
-	__u64			disabled       :  1, /* off by default        */
-				inherit	       :  1, /* children inherit it   */
-				pinned	       :  1, /* must always be on PMU */
-				exclusive      :  1, /* only group on PMU     */
-				exclude_user   :  1, /* don't count user      */
-				exclude_kernel :  1, /* ditto kernel          */
-				exclude_hv     :  1, /* ditto hypervisor      */
-				exclude_idle   :  1, /* don't count when idle */
-				mmap           :  1, /* include mmap data     */
-				comm	       :  1, /* include comm data     */
-				freq           :  1, /* use freq, not period  */
-				inherit_stat   :  1, /* per task counts       */
-				enable_on_exec :  1, /* next exec enables     */
-				task           :  1, /* trace fork/exit       */
-				watermark      :  1, /* wakeup_watermark      */
-				/*
-				 * precise_ip:
-				 *
-				 *  0 - SAMPLE_IP can have arbitrary skid
-				 *  1 - SAMPLE_IP must have constant skid
-				 *  2 - SAMPLE_IP requested to have 0 skid
-				 *  3 - SAMPLE_IP must have 0 skid
-				 *
-				 *  See also PERF_RECORD_MISC_EXACT_IP
-				 */
-				precise_ip     :  2, /* skid constraint       */
-				mmap_data      :  1, /* non-exec mmap data    */
-				sample_id_all  :  1, /* sample_type all events */
-
-				exclude_host   :  1, /* don't count in host   */
-				exclude_guest  :  1, /* don't count in guest  */
-
-				exclude_callchain_kernel : 1, /* exclude kernel callchains */
-				exclude_callchain_user   : 1, /* exclude user callchains */
-
-				__reserved_1   : 41;
-
-	union {
-		__u32		wakeup_events;	  /* wakeup every n events */
-		__u32		wakeup_watermark; /* bytes before wakeup   */
-	};
-
-	__u32			bp_type;
-	union {
-		__u64		bp_addr;
-		__u64		config1; /* extension of config */
-	};
-	union {
-		__u64		bp_len;
-		__u64		config2; /* extension of config1 */
-	};
-	__u64	branch_sample_type; /* enum perf_branch_sample_type */
-
-	/*
-	 * Defines set of user regs to dump on samples.
-	 * See asm/perf_regs.h for details.
-	 */
-	__u64	sample_regs_user;
-
-	/*
-	 * Defines size of the user stack to dump on samples.
-	 */
-	__u32	sample_stack_user;
-
-	/* Align to u64. */
-	__u32	__reserved_2;
-};
-
-#define perf_flags(attr)	(*(&(attr)->read_format + 1))
-
-/*
- * Ioctls that can be done on a perf event fd:
- */
-#define PERF_EVENT_IOC_ENABLE		_IO ('$', 0)
-#define PERF_EVENT_IOC_DISABLE		_IO ('$', 1)
-#define PERF_EVENT_IOC_REFRESH		_IO ('$', 2)
-#define PERF_EVENT_IOC_RESET		_IO ('$', 3)
-#define PERF_EVENT_IOC_PERIOD		_IOW('$', 4, __u64)
-#define PERF_EVENT_IOC_SET_OUTPUT	_IO ('$', 5)
-#define PERF_EVENT_IOC_SET_FILTER	_IOW('$', 6, char *)
-
-enum perf_event_ioc_flags {
-	PERF_IOC_FLAG_GROUP		= 1U << 0,
-};
-
-/*
- * Structure of the page that can be mapped via mmap
- */
-struct perf_event_mmap_page {
-	__u32	version;		/* version number of this structure */
-	__u32	compat_version;		/* lowest version this is compat with */
-
-	/*
-	 * Bits needed to read the hw events in user-space.
-	 *
-	 *   u32 seq, time_mult, time_shift, idx, width;
-	 *   u64 count, enabled, running;
-	 *   u64 cyc, time_offset;
-	 *   s64 pmc = 0;
-	 *
-	 *   do {
-	 *     seq = pc->lock;
-	 *     barrier()
-	 *
-	 *     enabled = pc->time_enabled;
-	 *     running = pc->time_running;
-	 *
-	 *     if (pc->cap_usr_time && enabled != running) {
-	 *       cyc = rdtsc();
-	 *       time_offset = pc->time_offset;
-	 *       time_mult   = pc->time_mult;
-	 *       time_shift  = pc->time_shift;
-	 *     }
-	 *
-	 *     idx = pc->index;
-	 *     count = pc->offset;
-	 *     if (pc->cap_usr_rdpmc && idx) {
-	 *       width = pc->pmc_width;
-	 *       pmc = rdpmc(idx - 1);
-	 *     }
-	 *
-	 *     barrier();
-	 *   } while (pc->lock != seq);
-	 *
-	 * NOTE: for obvious reason this only works on self-monitoring
-	 *       processes.
-	 */
-	__u32	lock;			/* seqlock for synchronization */
-	__u32	index;			/* hardware event identifier */
-	__s64	offset;			/* add to hardware event value */
-	__u64	time_enabled;		/* time event active */
-	__u64	time_running;		/* time event on cpu */
-	union {
-		__u64	capabilities;
-		__u64	cap_usr_time  : 1,
-			cap_usr_rdpmc : 1,
-			cap_____res   : 62;
-	};
-
-	/*
-	 * If cap_usr_rdpmc this field provides the bit-width of the value
-	 * read using the rdpmc() or equivalent instruction. This can be used
-	 * to sign extend the result like:
-	 *
-	 *   pmc <<= 64 - width;
-	 *   pmc >>= 64 - width; // signed shift right
-	 *   count += pmc;
-	 */
-	__u16	pmc_width;
-
-	/*
-	 * If cap_usr_time the below fields can be used to compute the time
-	 * delta since time_enabled (in ns) using rdtsc or similar.
-	 *
-	 *   u64 quot, rem;
-	 *   u64 delta;
-	 *
-	 *   quot = (cyc >> time_shift);
-	 *   rem = cyc & ((1 << time_shift) - 1);
-	 *   delta = time_offset + quot * time_mult +
-	 *              ((rem * time_mult) >> time_shift);
-	 *
-	 * Where time_offset,time_mult,time_shift and cyc are read in the
-	 * seqcount loop described above. This delta can then be added to
-	 * enabled and possible running (if idx), improving the scaling:
-	 *
-	 *   enabled += delta;
-	 *   if (idx)
-	 *     running += delta;
-	 *
-	 *   quot = count / running;
-	 *   rem  = count % running;
-	 *   count = quot * enabled + (rem * enabled) / running;
-	 */
-	__u16	time_shift;
-	__u32	time_mult;
-	__u64	time_offset;
-
-		/*
-		 * Hole for extension of the self monitor capabilities
-		 */
-
-	__u64	__reserved[120];	/* align to 1k */
-
-	/*
-	 * Control data for the mmap() data buffer.
-	 *
-	 * User-space reading the @data_head value should issue an rmb(), on
-	 * SMP capable platforms, after reading this value -- see
-	 * perf_event_wakeup().
-	 *
-	 * When the mapping is PROT_WRITE the @data_tail value should be
-	 * written by userspace to reflect the last read data. In this case
-	 * the kernel will not over-write unread data.
-	 */
-	__u64   data_head;		/* head in the data section */
-	__u64	data_tail;		/* user-space written tail */
-};
-
-#define PERF_RECORD_MISC_CPUMODE_MASK		(7 << 0)
-#define PERF_RECORD_MISC_CPUMODE_UNKNOWN	(0 << 0)
-#define PERF_RECORD_MISC_KERNEL			(1 << 0)
-#define PERF_RECORD_MISC_USER			(2 << 0)
-#define PERF_RECORD_MISC_HYPERVISOR		(3 << 0)
-#define PERF_RECORD_MISC_GUEST_KERNEL		(4 << 0)
-#define PERF_RECORD_MISC_GUEST_USER		(5 << 0)
-
-/*
- * Indicates that the content of PERF_SAMPLE_IP points to
- * the actual instruction that triggered the event. See also
- * perf_event_attr::precise_ip.
- */
-#define PERF_RECORD_MISC_EXACT_IP		(1 << 14)
-/*
- * Reserve the last bit to indicate some extended misc field
- */
-#define PERF_RECORD_MISC_EXT_RESERVED		(1 << 15)
-
-struct perf_event_header {
-	__u32	type;
-	__u16	misc;
-	__u16	size;
-};
-
-enum perf_event_type {
-
-	/*
-	 * If perf_event_attr.sample_id_all is set then all event types will
-	 * have the sample_type selected fields related to where/when
-	 * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
-	 * described in PERF_RECORD_SAMPLE below, it will be stashed just after
-	 * the perf_event_header and the fields already present for the existing
-	 * fields, i.e. at the end of the payload. That way a newer perf.data
-	 * file will be supported by older perf tools, with these new optional
-	 * fields being ignored.
-	 *
-	 * The MMAP events record the PROT_EXEC mappings so that we can
-	 * correlate userspace IPs to code. They have the following structure:
-	 *
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *
-	 *	u32				pid, tid;
-	 *	u64				addr;
-	 *	u64				len;
-	 *	u64				pgoff;
-	 *	char				filename[];
-	 * };
-	 */
-	PERF_RECORD_MMAP			= 1,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u64				id;
-	 *	u64				lost;
-	 * };
-	 */
-	PERF_RECORD_LOST			= 2,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *
-	 *	u32				pid, tid;
-	 *	char				comm[];
-	 * };
-	 */
-	PERF_RECORD_COMM			= 3,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u32				pid, ppid;
-	 *	u32				tid, ptid;
-	 *	u64				time;
-	 * };
-	 */
-	PERF_RECORD_EXIT			= 4,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u64				time;
-	 *	u64				id;
-	 *	u64				stream_id;
-	 * };
-	 */
-	PERF_RECORD_THROTTLE			= 5,
-	PERF_RECORD_UNTHROTTLE			= 6,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u32				pid, ppid;
-	 *	u32				tid, ptid;
-	 *	u64				time;
-	 * };
-	 */
-	PERF_RECORD_FORK			= 7,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *	u32				pid, tid;
-	 *
-	 *	struct read_format		values;
-	 * };
-	 */
-	PERF_RECORD_READ			= 8,
-
-	/*
-	 * struct {
-	 *	struct perf_event_header	header;
-	 *
-	 *	{ u64			ip;	  } && PERF_SAMPLE_IP
-	 *	{ u32			pid, tid; } && PERF_SAMPLE_TID
-	 *	{ u64			time;     } && PERF_SAMPLE_TIME
-	 *	{ u64			addr;     } && PERF_SAMPLE_ADDR
-	 *	{ u64			id;	  } && PERF_SAMPLE_ID
-	 *	{ u64			stream_id;} && PERF_SAMPLE_STREAM_ID
-	 *	{ u32			cpu, res; } && PERF_SAMPLE_CPU
-	 *	{ u64			period;   } && PERF_SAMPLE_PERIOD
-	 *
-	 *	{ struct read_format	values;	  } && PERF_SAMPLE_READ
-	 *
-	 *	{ u64			nr,
-	 *	  u64			ips[nr];  } && PERF_SAMPLE_CALLCHAIN
-	 *
-	 *	#
-	 *	# The RAW record below is opaque data wrt the ABI
-	 *	#
-	 *	# That is, the ABI doesn't make any promises wrt to
-	 *	# the stability of its content, it may vary depending
-	 *	# on event, hardware, kernel version and phase of
-	 *	# the moon.
-	 *	#
-	 *	# In other words, PERF_SAMPLE_RAW contents are not an ABI.
-	 *	#
-	 *
-	 *	{ u32			size;
-	 *	  char                  data[size];}&& PERF_SAMPLE_RAW
-	 *
-	 *	{ u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
-	 *
-	 * 	{ u64			abi; # enum perf_sample_regs_abi
-	 * 	  u64			regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER
-	 *
-	 * 	{ u64			size;
-	 * 	  char			data[size];
-	 * 	  u64			dyn_size; } && PERF_SAMPLE_STACK_USER
-	 * };
-	 */
-	PERF_RECORD_SAMPLE			= 9,
-
-	PERF_RECORD_MAX,			/* non-ABI */
-};
-
-#define PERF_MAX_STACK_DEPTH		127
-
-enum perf_callchain_context {
-	PERF_CONTEXT_HV			= (__u64)-32,
-	PERF_CONTEXT_KERNEL		= (__u64)-128,
-	PERF_CONTEXT_USER		= (__u64)-512,
-
-	PERF_CONTEXT_GUEST		= (__u64)-2048,
-	PERF_CONTEXT_GUEST_KERNEL	= (__u64)-2176,
-	PERF_CONTEXT_GUEST_USER		= (__u64)-2560,
-
-	PERF_CONTEXT_MAX		= (__u64)-4095,
-};
-
-#define PERF_FLAG_FD_NO_GROUP		(1U << 0)
-#define PERF_FLAG_FD_OUTPUT		(1U << 1)
-#define PERF_FLAG_PID_CGROUP		(1U << 2) /* pid=cgroup id, per-cpu mode only */
+#include <uapi/linux/perf_event.h>
 
-#ifdef __KERNEL__
 /*
  * Kernel-internal data types and definitions:
  */
@@ -1110,7 +513,7 @@
 	int				exclusive;
 	struct list_head		rotation_list;
 	int				jiffies_interval;
-	struct pmu			*active_pmu;
+	struct pmu			*unique_pmu;
 	struct perf_cgroup		*cgrp;
 };
 
@@ -1422,5 +825,4 @@
 									\
 static struct device_attribute format_attr_##_name = __ATTR_RO(_name)
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_PERF_EVENT_H */
diff --git a/include/linux/personality.h b/include/linux/personality.h
index 8fc7dd1a..646c0a7 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -1,7 +1,8 @@
 #ifndef _LINUX_PERSONALITY_H
 #define _LINUX_PERSONALITY_H
 
-#ifdef __KERNEL__
+#include <uapi/linux/personality.h>
+
 
 /*
  * Handling of different ABIs (personalities).
@@ -14,72 +15,6 @@
 extern int		unregister_exec_domain(struct exec_domain *);
 extern int		__set_personality(unsigned int);
 
-#endif /* __KERNEL__ */
-
-/*
- * Flags for bug emulation.
- *
- * These occupy the top three bytes.
- */
-enum {
-	UNAME26	=               0x0020000,
-	ADDR_NO_RANDOMIZE = 	0x0040000,	/* disable randomization of VA space */
-	FDPIC_FUNCPTRS =	0x0080000,	/* userspace function ptrs point to descriptors
-						 * (signal handling)
-						 */
-	MMAP_PAGE_ZERO =	0x0100000,
-	ADDR_COMPAT_LAYOUT =	0x0200000,
-	READ_IMPLIES_EXEC =	0x0400000,
-	ADDR_LIMIT_32BIT =	0x0800000,
-	SHORT_INODE =		0x1000000,
-	WHOLE_SECONDS =		0x2000000,
-	STICKY_TIMEOUTS	=	0x4000000,
-	ADDR_LIMIT_3GB = 	0x8000000,
-};
-
-/*
- * Security-relevant compatibility flags that must be
- * cleared upon setuid or setgid exec:
- */
-#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC  | \
-			    ADDR_NO_RANDOMIZE  | \
-			    ADDR_COMPAT_LAYOUT | \
-			    MMAP_PAGE_ZERO)
-
-/*
- * Personality types.
- *
- * These go in the low byte.  Avoid using the top bit, it will
- * conflict with error returns.
- */
-enum {
-	PER_LINUX =		0x0000,
-	PER_LINUX_32BIT =	0x0000 | ADDR_LIMIT_32BIT,
-	PER_LINUX_FDPIC =	0x0000 | FDPIC_FUNCPTRS,
-	PER_SVR4 =		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-	PER_SVR3 =		0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
-	PER_SCOSVR3 =		0x0003 | STICKY_TIMEOUTS |
-					 WHOLE_SECONDS | SHORT_INODE,
-	PER_OSR5 =		0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
-	PER_WYSEV386 =		0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
-	PER_ISCR4 =		0x0005 | STICKY_TIMEOUTS,
-	PER_BSD =		0x0006,
-	PER_SUNOS =		0x0006 | STICKY_TIMEOUTS,
-	PER_XENIX =		0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
-	PER_LINUX32 =		0x0008,
-	PER_LINUX32_3GB =	0x0008 | ADDR_LIMIT_3GB,
-	PER_IRIX32 =		0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */
-	PER_IRIXN32 =		0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */
-	PER_IRIX64 =		0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */
-	PER_RISCOS =		0x000c,
-	PER_SOLARIS =		0x000d | STICKY_TIMEOUTS,
-	PER_UW7 =		0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
-	PER_OSF4 =		0x000f,			 /* OSF/1 v4 */
-	PER_HPUX =		0x0010,
-	PER_MASK =		0x00ff,
-};
-
-#ifdef __KERNEL__
 
 /*
  * Description of an execution domain.
@@ -116,6 +51,4 @@
 #define set_personality(pers) \
 	((current->personality == (pers)) ? 0 : __set_personality(pers))
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_PERSONALITY_H */
diff --git a/include/linux/phonet.h b/include/linux/phonet.h
index f48bfc8..f691b04 100644
--- a/include/linux/phonet.h
+++ b/include/linux/phonet.h
@@ -19,169 +19,11 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  * 02110-1301 USA
  */
-
 #ifndef LINUX_PHONET_H
 #define LINUX_PHONET_H
 
-#include <linux/types.h>
-#include <linux/socket.h>
+#include <uapi/linux/phonet.h>
 
-/* Automatic protocol selection */
-#define PN_PROTO_TRANSPORT	0
-/* Phonet datagram socket */
-#define PN_PROTO_PHONET		1
-/* Phonet pipe */
-#define PN_PROTO_PIPE		2
-#define PHONET_NPROTO		3
-
-/* Socket options for SOL_PNPIPE level */
-#define PNPIPE_ENCAP		1
-#define PNPIPE_IFINDEX		2
-#define PNPIPE_HANDLE		3
-#define PNPIPE_INITSTATE	4
-
-#define PNADDR_ANY		0
-#define PNADDR_BROADCAST	0xFC
-#define PNPORT_RESOURCE_ROUTING	0
-
-/* Values for PNPIPE_ENCAP option */
-#define PNPIPE_ENCAP_NONE	0
-#define PNPIPE_ENCAP_IP		1
-
-/* ioctls */
-#define SIOCPNGETOBJECT		(SIOCPROTOPRIVATE + 0)
-#define SIOCPNENABLEPIPE	(SIOCPROTOPRIVATE + 13)
-#define SIOCPNADDRESOURCE	(SIOCPROTOPRIVATE + 14)
-#define SIOCPNDELRESOURCE	(SIOCPROTOPRIVATE + 15)
-
-/* Phonet protocol header */
-struct phonethdr {
-	__u8	pn_rdev;
-	__u8	pn_sdev;
-	__u8	pn_res;
-	__be16	pn_length;
-	__u8	pn_robj;
-	__u8	pn_sobj;
-} __attribute__((packed));
-
-/* Common Phonet payload header */
-struct phonetmsg {
-	__u8	pn_trans_id;	/* transaction ID */
-	__u8	pn_msg_id;	/* message type */
-	union {
-		struct {
-			__u8	pn_submsg_id;	/* message subtype */
-			__u8	pn_data[5];
-		} base;
-		struct {
-			__u16	pn_e_res_id;	/* extended resource ID */
-			__u8	pn_e_submsg_id;	/* message subtype */
-			__u8	pn_e_data[3];
-		} ext;
-	} pn_msg_u;
-};
-#define PN_COMMON_MESSAGE	0xF0
-#define PN_COMMGR		0x10
-#define PN_PREFIX		0xE0 /* resource for extended messages */
-#define pn_submsg_id		pn_msg_u.base.pn_submsg_id
-#define pn_e_submsg_id		pn_msg_u.ext.pn_e_submsg_id
-#define pn_e_res_id		pn_msg_u.ext.pn_e_res_id
-#define pn_data			pn_msg_u.base.pn_data
-#define pn_e_data		pn_msg_u.ext.pn_e_data
-
-/* data for unreachable errors */
-#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP	0x01
-#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP	0x14
-#define pn_orig_msg_id		pn_data[0]
-#define pn_status		pn_data[1]
-#define pn_e_orig_msg_id	pn_e_data[0]
-#define pn_e_status		pn_e_data[1]
-
-/* Phonet socket address structure */
-struct sockaddr_pn {
-	__kernel_sa_family_t spn_family;
-	__u8 spn_obj;
-	__u8 spn_dev;
-	__u8 spn_resource;
-	__u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
-} __attribute__((packed));
-
-/* Well known address */
-#define PN_DEV_PC	0x10
-
-static inline __u16 pn_object(__u8 addr, __u16 port)
-{
-	return (addr << 8) | (port & 0x3ff);
-}
-
-static inline __u8 pn_obj(__u16 handle)
-{
-	return handle & 0xff;
-}
-
-static inline __u8 pn_dev(__u16 handle)
-{
-	return handle >> 8;
-}
-
-static inline __u16 pn_port(__u16 handle)
-{
-	return handle & 0x3ff;
-}
-
-static inline __u8 pn_addr(__u16 handle)
-{
-	return (handle >> 8) & 0xfc;
-}
-
-static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr)
-{
-	spn->spn_dev &= 0x03;
-	spn->spn_dev |= addr & 0xfc;
-}
-
-static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port)
-{
-	spn->spn_dev &= 0xfc;
-	spn->spn_dev |= (port >> 8) & 0x03;
-	spn->spn_obj = port & 0xff;
-}
-
-static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn,
-						__u16 handle)
-{
-	spn->spn_dev = pn_dev(handle);
-	spn->spn_obj = pn_obj(handle);
-}
-
-static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn,
-						__u8 resource)
-{
-	spn->spn_resource = resource;
-}
-
-static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn)
-{
-	return spn->spn_dev & 0xfc;
-}
-
-static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn)
-{
-	return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj;
-}
-
-static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn)
-{
-	return pn_object(spn->spn_dev, spn->spn_obj);
-}
-
-static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn)
-{
-	return spn->spn_resource;
-}
-
-/* Phonet device ioctl requests */
-#ifdef __KERNEL__
 #define SIOCPNGAUTOCONF		(SIOCDEVPRIVATE + 0)
 
 struct if_phonet_autoconf {
@@ -195,6 +37,4 @@
 	} ifr_ifru;
 };
 #define ifr_phonet_autoconf ifr_ifru.ifru_phonet_autoconf
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
index 721301b..93d142a 100644
--- a/include/linux/pktcdvd.h
+++ b/include/linux/pktcdvd.h
@@ -12,108 +12,13 @@
 #ifndef __PKTCDVD_H
 #define __PKTCDVD_H
 
-#include <linux/types.h>
-
-/*
- * 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
- */
-#define PACKET_DEBUG		1
-
-#define	MAX_WRITERS		8
-
-#define PKT_RB_POOL_SIZE	512
-
-/*
- * How long we should hold a non-full packet before starting data gathering.
- */
-#define PACKET_WAIT_TIME	(HZ * 5 / 1000)
-
-/*
- * use drive write caching -- we need deferred error handling to be
- * able to successfully recover with this option (drive will return good
- * status as soon as the cdb is validated).
- */
-#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
-#define USE_WCACHING		1
-#else
-#define USE_WCACHING		0
-#endif
-
-/*
- * No user-servicable parts beyond this point ->
- */
-
-/*
- * device types
- */
-#define PACKET_CDR		1
-#define	PACKET_CDRW		2
-#define PACKET_DVDR		3
-#define PACKET_DVDRW		4
-
-/*
- * flags
- */
-#define PACKET_WRITABLE		1	/* pd is writable */
-#define PACKET_NWA_VALID	2	/* next writable address valid */
-#define PACKET_LRA_VALID	3	/* last recorded address valid */
-#define PACKET_MERGE_SEGS	4	/* perform segment merging to keep */
-					/* underlying cdrom device happy */
-
-/*
- * Disc status -- from READ_DISC_INFO
- */
-#define PACKET_DISC_EMPTY	0
-#define PACKET_DISC_INCOMPLETE	1
-#define PACKET_DISC_COMPLETE	2
-#define PACKET_DISC_OTHER	3
-
-/*
- * write type, and corresponding data block type
- */
-#define PACKET_MODE1		1
-#define PACKET_MODE2		2
-#define PACKET_BLOCK_MODE1	8
-#define PACKET_BLOCK_MODE2	10
-
-/*
- * Last session/border status
- */
-#define PACKET_SESSION_EMPTY		0
-#define PACKET_SESSION_INCOMPLETE	1
-#define PACKET_SESSION_RESERVED		2
-#define PACKET_SESSION_COMPLETE		3
-
-#define PACKET_MCN			"4a656e734178626f65323030300000"
-
-#undef PACKET_USE_LS
-
-#define PKT_CTRL_CMD_SETUP	0
-#define PKT_CTRL_CMD_TEARDOWN	1
-#define PKT_CTRL_CMD_STATUS	2
-
-struct pkt_ctrl_command {
-	__u32 command;				/* in: Setup, teardown, status */
-	__u32 dev_index;			/* in/out: Device index */
-	__u32 dev;				/* in/out: Device nr for cdrw device */
-	__u32 pkt_dev;				/* in/out: Device nr for packet device */
-	__u32 num_devices;			/* out: Largest device index + 1 */
-	__u32 padding;				/* Not used */
-};
-
-/*
- * packet ioctls
- */
-#define PACKET_IOCTL_MAGIC	('X')
-#define PACKET_CTRL_CMD		_IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
-
-#ifdef __KERNEL__
 #include <linux/blkdev.h>
 #include <linux/completion.h>
 #include <linux/cdrom.h>
 #include <linux/kobject.h>
 #include <linux/sysfs.h>
 #include <linux/mempool.h>
+#include <uapi/linux/pktcdvd.h>
 
 /* default bio write queue congestion marks */
 #define PKT_WRITE_CONGESTION_ON    10000
@@ -297,6 +202,4 @@
 	struct dentry		*dfs_f_info;	/* debugfs: info file */
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* __PKTCDVD_H */
diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos_thermal.h
similarity index 64%
rename from include/linux/platform_data/exynos4_tmu.h
rename to include/linux/platform_data/exynos_thermal.h
index 39e038c..a7bdb2f 100644
--- a/include/linux/platform_data/exynos4_tmu.h
+++ b/include/linux/platform_data/exynos_thermal.h
@@ -1,5 +1,5 @@
 /*
- * exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit)
+ * exynos_thermal.h - Samsung EXYNOS TMU (Thermal Management Unit)
  *
  *  Copyright (C) 2011 Samsung Electronics
  *  Donggeun Kim <dg77.kim@samsung.com>
@@ -19,8 +19,9 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#ifndef _LINUX_EXYNOS4_TMU_H
-#define _LINUX_EXYNOS4_TMU_H
+#ifndef _LINUX_EXYNOS_THERMAL_H
+#define _LINUX_EXYNOS_THERMAL_H
+#include <linux/cpu_cooling.h>
 
 enum calibration_type {
 	TYPE_ONE_POINT_TRIMMING,
@@ -28,8 +29,28 @@
 	TYPE_NONE,
 };
 
+enum soc_type {
+	SOC_ARCH_EXYNOS4210 = 1,
+	SOC_ARCH_EXYNOS,
+};
 /**
- * struct exynos4_tmu_platform_data
+ * struct freq_clip_table
+ * @freq_clip_max: maximum frequency allowed for this cooling state.
+ * @temp_level: Temperature level at which the temperature clipping will
+ *	happen.
+ * @mask_val: cpumask of the allowed cpu's where the clipping will take place.
+ *
+ * This structure is required to be filled and passed to the
+ * cpufreq_cooling_unregister function.
+ */
+struct freq_clip_table {
+	unsigned int freq_clip_max;
+	unsigned int temp_level;
+	const struct cpumask *mask_val;
+};
+
+/**
+ * struct exynos_tmu_platform_data
  * @threshold: basic temperature for generating interrupt
  *	       25 <= threshold <= 125 [unit: degree Celsius]
  * @trigger_levels: array for each interrupt levels
@@ -63,11 +84,18 @@
  * @reference_voltage: reference voltage of amplifier
  *	in the positive-TC generator block
  *	0 <= reference_voltage <= 31
+ * @noise_cancel_mode: noise cancellation mode
+ *	000, 100, 101, 110 and 111 can be different modes
+ * @type: determines the type of SOC
+ * @efuse_value: platform defined fuse value
  * @cal_type: calibration type for temperature
+ * @freq_clip_table: Table representing frequency reduction percentage.
+ * @freq_tab_count: Count of the above table as frequency reduction may
+ *	applicable to only some of the trigger levels.
  *
- * This structure is required for configuration of exynos4_tmu driver.
+ * This structure is required for configuration of exynos_tmu driver.
  */
-struct exynos4_tmu_platform_data {
+struct exynos_tmu_platform_data {
 	u8 threshold;
 	u8 trigger_levels[4];
 	bool trigger_level0_en;
@@ -77,7 +105,12 @@
 
 	u8 gain;
 	u8 reference_voltage;
+	u8 noise_cancel_mode;
+	u32 efuse_value;
 
 	enum calibration_type cal_type;
+	enum soc_type type;
+	struct freq_clip_table freq_tab[4];
+	unsigned int freq_tab_count;
 };
-#endif /* _LINUX_EXYNOS4_TMU_H */
+#endif /* _LINUX_EXYNOS_THERMAL_H */
diff --git a/include/linux/pmu.h b/include/linux/pmu.h
index 84e6a55..99b400b 100644
--- a/include/linux/pmu.h
+++ b/include/linux/pmu.h
@@ -5,137 +5,11 @@
  *
  * Copyright (C) 1998 Paul Mackerras.
  */
-
 #ifndef _LINUX_PMU_H
 #define _LINUX_PMU_H
 
-#define PMU_DRIVER_VERSION	2
+#include <uapi/linux/pmu.h>
 
-/*
- * PMU commands
- */
-#define PMU_POWER_CTRL0		0x10	/* control power of some devices */
-#define PMU_POWER_CTRL		0x11	/* control power of some devices */
-#define PMU_ADB_CMD		0x20	/* send ADB packet */
-#define PMU_ADB_POLL_OFF	0x21	/* disable ADB auto-poll */
-#define PMU_WRITE_NVRAM		0x33	/* write non-volatile RAM */
-#define PMU_READ_NVRAM		0x3b	/* read non-volatile RAM */
-#define PMU_SET_RTC		0x30	/* set real-time clock */
-#define PMU_READ_RTC		0x38	/* read real-time clock */
-#define PMU_SET_VOLBUTTON	0x40	/* set volume up/down position */
-#define PMU_BACKLIGHT_BRIGHT	0x41	/* set backlight brightness */
-#define PMU_GET_VOLBUTTON	0x48	/* get volume up/down position */
-#define PMU_PCEJECT		0x4c	/* eject PC-card from slot */
-#define PMU_BATTERY_STATE	0x6b	/* report battery state etc. */
-#define PMU_SMART_BATTERY_STATE	0x6f	/* report battery state (new way) */
-#define PMU_SET_INTR_MASK	0x70	/* set PMU interrupt mask */
-#define PMU_INT_ACK		0x78	/* read interrupt bits */
-#define PMU_SHUTDOWN		0x7e	/* turn power off */
-#define PMU_CPU_SPEED		0x7d	/* control CPU speed on some models */
-#define PMU_SLEEP		0x7f	/* put CPU to sleep */
-#define PMU_POWER_EVENTS	0x8f	/* Send power-event commands to PMU */
-#define PMU_I2C_CMD		0x9a	/* I2C operations */
-#define PMU_RESET		0xd0	/* reset CPU */
-#define PMU_GET_BRIGHTBUTTON	0xd9	/* report brightness up/down pos */
-#define PMU_GET_COVER		0xdc	/* report cover open/closed */
-#define PMU_SYSTEM_READY	0xdf	/* tell PMU we are awake */
-#define PMU_GET_VERSION		0xea	/* read the PMU version */
-
-/* Bits to use with the PMU_POWER_CTRL0 command */
-#define PMU_POW0_ON		0x80	/* OR this to power ON the device */
-#define PMU_POW0_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
-#define PMU_POW0_HARD_DRIVE	0x04	/* Hard drive power (on wallstreet/lombard ?) */
-
-/* Bits to use with the PMU_POWER_CTRL command */
-#define PMU_POW_ON		0x80	/* OR this to power ON the device */
-#define PMU_POW_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
-#define PMU_POW_BACKLIGHT	0x01	/* backlight power */
-#define PMU_POW_CHARGER		0x02	/* battery charger power */
-#define PMU_POW_IRLED		0x04	/* IR led power (on wallstreet) */
-#define PMU_POW_MEDIABAY	0x08	/* media bay power (wallstreet/lombard ?) */
-
-/* Bits in PMU interrupt and interrupt mask bytes */
-#define PMU_INT_PCEJECT		0x04	/* PC-card eject buttons */
-#define PMU_INT_SNDBRT		0x08	/* sound/brightness up/down buttons */
-#define PMU_INT_ADB		0x10	/* ADB autopoll or reply data */
-#define PMU_INT_BATTERY		0x20	/* Battery state change */
-#define PMU_INT_ENVIRONMENT	0x40	/* Environment interrupts */
-#define PMU_INT_TICK		0x80	/* 1-second tick interrupt */
-
-/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
-#define PMU_INT_ADB_AUTO	0x04	/* ADB autopoll, when PMU_INT_ADB */
-#define PMU_INT_WAITING_CHARGER	0x01	/* ??? */
-#define PMU_INT_AUTO_SRQ_POLL	0x02	/* ??? */
-
-/* Bits in the environement message (either obtained via PMU_GET_COVER,
- * or via PMU_INT_ENVIRONMENT on core99 */
-#define PMU_ENV_LID_CLOSED	0x01	/* The lid is closed */
-
-/* I2C related definitions */
-#define PMU_I2C_MODE_SIMPLE	0
-#define PMU_I2C_MODE_STDSUB	1
-#define PMU_I2C_MODE_COMBINED	2
-
-#define PMU_I2C_BUS_STATUS	0
-#define PMU_I2C_BUS_SYSCLK	1
-#define PMU_I2C_BUS_POWER	2
-
-#define PMU_I2C_STATUS_OK	0
-#define PMU_I2C_STATUS_DATAREAD	1
-#define PMU_I2C_STATUS_BUSY	0xfe
-
-
-/* Kind of PMU (model) */
-enum {
-	PMU_UNKNOWN,
-	PMU_OHARE_BASED,	/* 2400, 3400, 3500 (old G3 powerbook) */
-	PMU_HEATHROW_BASED,	/* PowerBook G3 series */
-	PMU_PADDINGTON_BASED,	/* 1999 PowerBook G3 */
-	PMU_KEYLARGO_BASED,	/* Core99 motherboard (PMU99) */
-	PMU_68K_V1,		/* 68K PMU, version 1 */
-	PMU_68K_V2, 		/* 68K PMU, version 2 */
-};
-
-/* PMU PMU_POWER_EVENTS commands */
-enum {
-	PMU_PWR_GET_POWERUP_EVENTS	= 0x00,
-	PMU_PWR_SET_POWERUP_EVENTS	= 0x01,
-	PMU_PWR_CLR_POWERUP_EVENTS	= 0x02,
-	PMU_PWR_GET_WAKEUP_EVENTS	= 0x03,
-	PMU_PWR_SET_WAKEUP_EVENTS	= 0x04,
-	PMU_PWR_CLR_WAKEUP_EVENTS	= 0x05,
-};
-
-/* Power events wakeup bits */
-enum {
-	PMU_PWR_WAKEUP_KEY		= 0x01,	/* Wake on key press */
-	PMU_PWR_WAKEUP_AC_INSERT	= 0x02, /* Wake on AC adapter plug */
-	PMU_PWR_WAKEUP_AC_CHANGE	= 0x04,
-	PMU_PWR_WAKEUP_LID_OPEN		= 0x08,
-	PMU_PWR_WAKEUP_RING		= 0x10,
-};
-	
-/*
- * Ioctl commands for the /dev/pmu device
- */
-#include <linux/ioctl.h>
-
-/* no param */
-#define PMU_IOC_SLEEP		_IO('B', 0)
-/* out param: u32*	backlight value: 0 to 15 */
-#define PMU_IOC_GET_BACKLIGHT	_IOR('B', 1, size_t)
-/* in param: u32	backlight value: 0 to 15 */
-#define PMU_IOC_SET_BACKLIGHT	_IOW('B', 2, size_t)
-/* out param: u32*	PMU model */
-#define PMU_IOC_GET_MODEL	_IOR('B', 3, size_t)
-/* out param: u32*	has_adb: 0 or 1 */
-#define PMU_IOC_HAS_ADB		_IOR('B', 4, size_t) 
-/* out param: u32*	can_sleep: 0 or 1 */
-#define PMU_IOC_CAN_SLEEP	_IOR('B', 5, size_t) 
-/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
-#define PMU_IOC_GRAB_BACKLIGHT	_IOR('B', 6, size_t) 
-
-#ifdef __KERNEL__
 
 extern int find_via_pmu(void);
 
@@ -208,6 +82,4 @@
 #define pmu_sys_suspended	0
 #endif
 
-#endif	/* __KERNEL__ */
-
 #endif /* _LINUX_PMU_H */
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 48fe8bc..c08386f 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -1,9 +1,6 @@
 #ifndef _LINUX_POLL_H
 #define _LINUX_POLL_H
 
-#include <asm/poll.h>
-
-#ifdef __KERNEL__
 
 #include <linux/compiler.h>
 #include <linux/ktime.h>
@@ -12,6 +9,7 @@
 #include <linux/fs.h>
 #include <linux/sysctl.h>
 #include <asm/uaccess.h>
+#include <uapi/linux/poll.h>
 
 extern struct ctl_table epoll_table[]; /* for sysctl */
 /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
@@ -163,6 +161,4 @@
 
 extern int poll_select_set_timeout(struct timespec *to, long sec, long nsec);
 
-#endif /* KERNEL */
-
 #endif /* _LINUX_POLL_H */
diff --git a/include/linux/ppp-comp.h b/include/linux/ppp-comp.h
index e53ff659..4ea1d37 100644
--- a/include/linux/ppp-comp.h
+++ b/include/linux/ppp-comp.h
@@ -10,6 +10,9 @@
 #ifndef _NET_PPP_COMP_H
 #define _NET_PPP_COMP_H
 
+#include <uapi/linux/ppp-comp.h>
+
+
 struct module;
 
 /*
@@ -98,87 +101,6 @@
 #define DECOMP_ERROR		-1	/* error detected before decomp. */
 #define DECOMP_FATALERROR	-2	/* error detected after decomp. */
 
-/*
- * CCP codes.
- */
-
-#define CCP_CONFREQ	1
-#define CCP_CONFACK	2
-#define CCP_TERMREQ	5
-#define CCP_TERMACK	6
-#define CCP_RESETREQ	14
-#define CCP_RESETACK	15
-
-/*
- * Max # bytes for a CCP option
- */
-
-#define CCP_MAX_OPTION_LENGTH	32
-
-/*
- * Parts of a CCP packet.
- */
-
-#define CCP_CODE(dp)		((dp)[0])
-#define CCP_ID(dp)		((dp)[1])
-#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN		4
-
-#define CCP_OPT_CODE(dp)	((dp)[0])
-#define CCP_OPT_LENGTH(dp)	((dp)[1])
-#define CCP_OPT_MINLEN		2
-
-/*
- * Definitions for BSD-Compress.
- */
-
-#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS	3	/* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
-#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
-#define BSD_CURRENT_VERSION	1		/* current version number */
-#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
-
-#define BSD_MIN_BITS		9	/* smallest code size supported */
-#define BSD_MAX_BITS		15	/* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-
-#define CI_DEFLATE		26	/* config option for Deflate */
-#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
-#define CILEN_DEFLATE		4	/* length of its config option */
-
-#define DEFLATE_MIN_SIZE	9
-#define DEFLATE_MAX_SIZE	15
-#define DEFLATE_METHOD_VAL	8
-#define DEFLATE_SIZE(x)		(((x) >> 4) + 8)
-#define DEFLATE_METHOD(x)	((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w)	((((w) - 8) << 4) + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE	0
-
-/*
- * Definitions for MPPE.
- */
-
-#define CI_MPPE                18      /* config option for MPPE */
-#define CILEN_MPPE              6      /* length of config option */
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-
-#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1	2	/* length of its config option */
-#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2	2	/* length of its config option */
-
-#ifdef __KERNEL__
 extern int ppp_register_compressor(struct compressor *);
 extern void ppp_unregister_compressor(struct compressor *);
-#endif /* __KERNEL__ */
-
 #endif /* _NET_PPP_COMP_H */
diff --git a/include/linux/ppp_defs.h b/include/linux/ppp_defs.h
index ba416f6..28aa023 100644
--- a/include/linux/ppp_defs.h
+++ b/include/linux/ppp_defs.h
@@ -7,148 +7,11 @@
  *  modify it under the terms of the GNU General Public License
  *  version 2 as published by the Free Software Foundation.
  */
-#include <linux/types.h>
-
 #ifndef _PPP_DEFS_H_
 #define _PPP_DEFS_H_
 
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN	4	/* octets for standard ppp header */
-#define PPP_FCSLEN	2	/* octets for FCS */
-#define PPP_MRU		1500	/* default MRU = max length of info field */
-
-#define PPP_ADDRESS(p)	(((__u8 *)(p))[0])
-#define PPP_CONTROL(p)	(((__u8 *)(p))[1])
-#define PPP_PROTOCOL(p)	((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
-#define	PPP_UI		0x03	/* Unnumbered Information */
-#define	PPP_FLAG	0x7e	/* Flag Sequence */
-#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
-#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP		0x21	/* Internet Protocol */
-#define PPP_AT		0x29	/* AppleTalk Protocol */
-#define PPP_IPX		0x2b	/* IPX protocol */
-#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
-#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
-#define PPP_MP		0x3d	/* Multilink protocol */
-#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
-#define PPP_COMPFRAG	0xfb	/* fragment compressed below bundle */
-#define PPP_COMP	0xfd	/* compressed packet */
-#define PPP_MPLS_UC	0x0281	/* Multi Protocol Label Switching - Unicast */
-#define PPP_MPLS_MC	0x0283	/* Multi Protocol Label Switching - Multicast */
-#define PPP_IPCP	0x8021	/* IP Control Protocol */
-#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
-#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
-#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
-#define PPP_CCPFRAG	0x80fb	/* CCP at link level (below MP bundle) */
-#define PPP_CCP		0x80fd	/* Compression Control Protocol */
-#define PPP_MPLSCP	0x80fd	/* MPLS Control Protocol */
-#define PPP_LCP		0xc021	/* Link Control Protocol */
-#define PPP_PAP		0xc023	/* Password Authentication Protocol */
-#define PPP_LQR		0xc025	/* Link Quality Report protocol */
-#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP	0xc029	/* Callback Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-
-#define PPP_INITFCS	0xffff	/* Initial FCS value */
-#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
-
-#ifdef __KERNEL__
 #include <linux/crc-ccitt.h>
+#include <uapi/linux/ppp_defs.h>
+
 #define PPP_FCS(fcs, c) crc_ccitt_byte(fcs, c)
-#endif
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-
-typedef __u32		ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
-    NPMODE_PASS,		/* pass the packet through */
-    NPMODE_DROP,		/* silently drop the packet */
-    NPMODE_ERROR,		/* return an error */
-    NPMODE_QUEUE		/* save it up for later. */
-};
-
-/*
- * Statistics for LQRP and pppstats
- */
-struct pppstat	{
-    __u32	ppp_discards;	/* # frames discarded */
-
-    __u32	ppp_ibytes;	/* bytes received */
-    __u32	ppp_ioctects;	/* bytes received not in error */
-    __u32	ppp_ipackets;	/* packets received */
-    __u32	ppp_ierrors;	/* receive errors */
-    __u32	ppp_ilqrs;	/* # LQR frames received */
-
-    __u32	ppp_obytes;	/* raw bytes sent */
-    __u32	ppp_ooctects;	/* frame bytes sent */
-    __u32	ppp_opackets;	/* packets sent */
-    __u32	ppp_oerrors;	/* transmit errors */ 
-    __u32	ppp_olqrs;	/* # LQR frames sent */
-};
-
-struct vjstat {
-    __u32	vjs_packets;	/* outbound packets */
-    __u32	vjs_compressed;	/* outbound compressed packets */
-    __u32	vjs_searches;	/* searches for connection state */
-    __u32	vjs_misses;	/* times couldn't find conn. state */
-    __u32	vjs_uncompressedin; /* inbound uncompressed packets */
-    __u32	vjs_compressedin;   /* inbound compressed packets */
-    __u32	vjs_errorin;	/* inbound unknown type packets */
-    __u32	vjs_tossed;	/* inbound packets tossed because of error */
-};
-
-struct compstat {
-    __u32	unc_bytes;	/* total uncompressed bytes */
-    __u32	unc_packets;	/* total uncompressed packets */
-    __u32	comp_bytes;	/* compressed bytes */
-    __u32	comp_packets;	/* compressed packets */
-    __u32	inc_bytes;	/* incompressible bytes */
-    __u32	inc_packets;	/* incompressible packets */
-
-    /* the compression ratio is defined as in_count / bytes_out */
-    __u32       in_count;	/* Bytes received */
-    __u32       bytes_out;	/* Bytes transmitted */
-
-    double	ratio;		/* not computed in kernel. */
-};
-
-struct ppp_stats {
-    struct pppstat	p;	/* basic PPP statistics */
-    struct vjstat	vj;	/* VJ header compression statistics */
-};
-
-struct ppp_comp_stats {
-    struct compstat	c;	/* packet compression statistics */
-    struct compstat	d;	/* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
-    __kernel_time_t xmit_idle;	/* time since last NP packet sent */
-    __kernel_time_t recv_idle;	/* time since last NP packet received */
-};
-
 #endif /* _PPP_DEFS_H_ */
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 1d24ffa..e0ff468 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -1,82 +1,12 @@
 #ifndef _LINUX_PTRACE_H
 #define _LINUX_PTRACE_H
-/* ptrace.h */
-/* structs and defines to help the user use the ptrace system call. */
 
-/* has the defines to get at the registers. */
+#include <linux/compiler.h>		/* For unlikely.  */
+#include <linux/sched.h>		/* For struct task_struct.  */
+#include <linux/err.h>			/* for IS_ERR_VALUE */
+#include <linux/bug.h>			/* For BUG_ON.  */
+#include <uapi/linux/ptrace.h>
 
-#define PTRACE_TRACEME		   0
-#define PTRACE_PEEKTEXT		   1
-#define PTRACE_PEEKDATA		   2
-#define PTRACE_PEEKUSR		   3
-#define PTRACE_POKETEXT		   4
-#define PTRACE_POKEDATA		   5
-#define PTRACE_POKEUSR		   6
-#define PTRACE_CONT		   7
-#define PTRACE_KILL		   8
-#define PTRACE_SINGLESTEP	   9
-
-#define PTRACE_ATTACH		  16
-#define PTRACE_DETACH		  17
-
-#define PTRACE_SYSCALL		  24
-
-/* 0x4200-0x4300 are reserved for architecture-independent additions.  */
-#define PTRACE_SETOPTIONS	0x4200
-#define PTRACE_GETEVENTMSG	0x4201
-#define PTRACE_GETSIGINFO	0x4202
-#define PTRACE_SETSIGINFO	0x4203
-
-/*
- * Generic ptrace interface that exports the architecture specific regsets
- * using the corresponding NT_* types (which are also used in the core dump).
- * Please note that the NT_PRSTATUS note type in a core dump contains a full
- * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
- * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
- * other user_regset flavors, the user_regset layout and the ELF core dump note
- * payload are exactly the same layout.
- *
- * This interface usage is as follows:
- *	struct iovec iov = { buf, len};
- *
- *	ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
- *
- * On the successful completion, iov.len will be updated by the kernel,
- * specifying how much the kernel has written/read to/from the user's iov.buf.
- */
-#define PTRACE_GETREGSET	0x4204
-#define PTRACE_SETREGSET	0x4205
-
-#define PTRACE_SEIZE		0x4206
-#define PTRACE_INTERRUPT	0x4207
-#define PTRACE_LISTEN		0x4208
-
-/* Wait extended result codes for the above trace options.  */
-#define PTRACE_EVENT_FORK	1
-#define PTRACE_EVENT_VFORK	2
-#define PTRACE_EVENT_CLONE	3
-#define PTRACE_EVENT_EXEC	4
-#define PTRACE_EVENT_VFORK_DONE	5
-#define PTRACE_EVENT_EXIT	6
-#define PTRACE_EVENT_SECCOMP	7
-/* Extended result codes which enabled by means other than options.  */
-#define PTRACE_EVENT_STOP	128
-
-/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
-#define PTRACE_O_TRACESYSGOOD	1
-#define PTRACE_O_TRACEFORK	(1 << PTRACE_EVENT_FORK)
-#define PTRACE_O_TRACEVFORK	(1 << PTRACE_EVENT_VFORK)
-#define PTRACE_O_TRACECLONE	(1 << PTRACE_EVENT_CLONE)
-#define PTRACE_O_TRACEEXEC	(1 << PTRACE_EVENT_EXEC)
-#define PTRACE_O_TRACEVFORKDONE	(1 << PTRACE_EVENT_VFORK_DONE)
-#define PTRACE_O_TRACEEXIT	(1 << PTRACE_EVENT_EXIT)
-#define PTRACE_O_TRACESECCOMP	(1 << PTRACE_EVENT_SECCOMP)
-
-#define PTRACE_O_MASK		0x000000ff
-
-#include <asm/ptrace.h>
-
-#ifdef __KERNEL__
 /*
  * Ptrace flags
  *
@@ -108,12 +38,6 @@
 #define PT_BLOCKSTEP_BIT	30
 #define PT_BLOCKSTEP		(1<<PT_BLOCKSTEP_BIT)
 
-#include <linux/compiler.h>		/* For unlikely.  */
-#include <linux/sched.h>		/* For struct task_struct.  */
-#include <linux/err.h>			/* for IS_ERR_VALUE */
-#include <linux/bug.h>			/* For BUG_ON.  */
-
-
 extern long arch_ptrace(struct task_struct *child, long request,
 			unsigned long addr, unsigned long data);
 extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);
@@ -416,6 +340,4 @@
 static inline void ptrace_put_breakpoints(struct task_struct *tsk) { }
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
-#endif /* __KERNEL */
-
 #endif
diff --git a/include/linux/quota.h b/include/linux/quota.h
index dcd5721..58fdef12 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -29,146 +29,9 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  */
-
 #ifndef _LINUX_QUOTA_
 #define _LINUX_QUOTA_
 
-#include <linux/errno.h>
-#include <linux/types.h>
-
-#define __DQUOT_VERSION__	"dquot_6.5.2"
-
-#define MAXQUOTAS 2
-#define USRQUOTA  0		/* element used for user quotas */
-#define GRPQUOTA  1		/* element used for group quotas */
-
-/*
- * Definitions for the default names of the quotas files.
- */
-#define INITQFNAMES { \
-	"user",    /* USRQUOTA */ \
-	"group",   /* GRPQUOTA */ \
-	"undefined", \
-};
-
-/*
- * Command definitions for the 'quotactl' system call.
- * The commands are broken into a main command defined below
- * and a subcommand that is used to convey the type of
- * quota that is being manipulated (see above).
- */
-#define SUBCMDMASK  0x00ff
-#define SUBCMDSHIFT 8
-#define QCMD(cmd, type)  (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK))
-
-#define Q_SYNC     0x800001	/* sync disk copy of a filesystems quotas */
-#define Q_QUOTAON  0x800002	/* turn quotas on */
-#define Q_QUOTAOFF 0x800003	/* turn quotas off */
-#define Q_GETFMT   0x800004	/* get quota format used on given filesystem */
-#define Q_GETINFO  0x800005	/* get information about quota files */
-#define Q_SETINFO  0x800006	/* set information about quota files */
-#define Q_GETQUOTA 0x800007	/* get user quota structure */
-#define Q_SETQUOTA 0x800008	/* set user quota structure */
-
-/* Quota format type IDs */
-#define	QFMT_VFS_OLD 1
-#define	QFMT_VFS_V0 2
-#define QFMT_OCFS2 3
-#define	QFMT_VFS_V1 4
-
-/* Size of block in which space limits are passed through the quota
- * interface */
-#define QIF_DQBLKSIZE_BITS 10
-#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS)
-
-/*
- * Quota structure used for communication with userspace via quotactl
- * Following flags are used to specify which fields are valid
- */
-enum {
-	QIF_BLIMITS_B = 0,
-	QIF_SPACE_B,
-	QIF_ILIMITS_B,
-	QIF_INODES_B,
-	QIF_BTIME_B,
-	QIF_ITIME_B,
-};
-
-#define QIF_BLIMITS	(1 << QIF_BLIMITS_B)
-#define QIF_SPACE	(1 << QIF_SPACE_B)
-#define QIF_ILIMITS	(1 << QIF_ILIMITS_B)
-#define QIF_INODES	(1 << QIF_INODES_B)
-#define QIF_BTIME	(1 << QIF_BTIME_B)
-#define QIF_ITIME	(1 << QIF_ITIME_B)
-#define QIF_LIMITS	(QIF_BLIMITS | QIF_ILIMITS)
-#define QIF_USAGE	(QIF_SPACE | QIF_INODES)
-#define QIF_TIMES	(QIF_BTIME | QIF_ITIME)
-#define QIF_ALL		(QIF_LIMITS | QIF_USAGE | QIF_TIMES)
-
-struct if_dqblk {
-	__u64 dqb_bhardlimit;
-	__u64 dqb_bsoftlimit;
-	__u64 dqb_curspace;
-	__u64 dqb_ihardlimit;
-	__u64 dqb_isoftlimit;
-	__u64 dqb_curinodes;
-	__u64 dqb_btime;
-	__u64 dqb_itime;
-	__u32 dqb_valid;
-};
-
-/*
- * Structure used for setting quota information about file via quotactl
- * Following flags are used to specify which fields are valid
- */
-#define IIF_BGRACE	1
-#define IIF_IGRACE	2
-#define IIF_FLAGS	4
-#define IIF_ALL		(IIF_BGRACE | IIF_IGRACE | IIF_FLAGS)
-
-struct if_dqinfo {
-	__u64 dqi_bgrace;
-	__u64 dqi_igrace;
-	__u32 dqi_flags;
-	__u32 dqi_valid;
-};
-
-/*
- * Definitions for quota netlink interface
- */
-#define QUOTA_NL_NOWARN 0
-#define QUOTA_NL_IHARDWARN 1		/* Inode hardlimit reached */
-#define QUOTA_NL_ISOFTLONGWARN 2 	/* Inode grace time expired */
-#define QUOTA_NL_ISOFTWARN 3		/* Inode softlimit reached */
-#define QUOTA_NL_BHARDWARN 4		/* Block hardlimit reached */
-#define QUOTA_NL_BSOFTLONGWARN 5	/* Block grace time expired */
-#define QUOTA_NL_BSOFTWARN 6		/* Block softlimit reached */
-#define QUOTA_NL_IHARDBELOW 7		/* Usage got below inode hardlimit */
-#define QUOTA_NL_ISOFTBELOW 8		/* Usage got below inode softlimit */
-#define QUOTA_NL_BHARDBELOW 9		/* Usage got below block hardlimit */
-#define QUOTA_NL_BSOFTBELOW 10		/* Usage got below block softlimit */
-
-enum {
-	QUOTA_NL_C_UNSPEC,
-	QUOTA_NL_C_WARNING,
-	__QUOTA_NL_C_MAX,
-};
-#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1)
-
-enum {
-	QUOTA_NL_A_UNSPEC,
-	QUOTA_NL_A_QTYPE,
-	QUOTA_NL_A_EXCESS_ID,
-	QUOTA_NL_A_WARNING,
-	QUOTA_NL_A_DEV_MAJOR,
-	QUOTA_NL_A_DEV_MINOR,
-	QUOTA_NL_A_CAUSED_ID,
-	__QUOTA_NL_A_MAX,
-};
-#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1)
-
-
-#ifdef __KERNEL__
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/rwsem.h>
@@ -183,6 +46,7 @@
 #include <linux/atomic.h>
 #include <linux/uidgid.h>
 #include <linux/projid.h>
+#include <uapi/linux/quota.h>
 
 #undef USRQUOTA
 #undef GRPQUOTA
@@ -543,5 +407,4 @@
 	{QFMT_VFS_V0, "quota_v2"},\
 	{0, NULL}}
 
-#endif /* __KERNEL__ */
 #endif /* _QUOTA_ */
diff --git a/include/linux/random.h b/include/linux/random.h
index ac621ce..6330ed4 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -3,50 +3,11 @@
  *
  * Include file for the random number generator.
  */
-
 #ifndef _LINUX_RANDOM_H
 #define _LINUX_RANDOM_H
 
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/irqnr.h>
+#include <uapi/linux/random.h>
 
-/* ioctl()'s for the random number generator */
-
-/* Get the entropy count. */
-#define RNDGETENTCNT	_IOR( 'R', 0x00, int )
-
-/* Add to (or subtract from) the entropy count.  (Superuser only.) */
-#define RNDADDTOENTCNT	_IOW( 'R', 0x01, int )
-
-/* Get the contents of the entropy pool.  (Superuser only.) */
-#define RNDGETPOOL	_IOR( 'R', 0x02, int [2] )
-
-/* 
- * Write bytes into the entropy pool and add to the entropy count.
- * (Superuser only.)
- */
-#define RNDADDENTROPY	_IOW( 'R', 0x03, int [2] )
-
-/* Clear entropy count to 0.  (Superuser only.) */
-#define RNDZAPENTCNT	_IO( 'R', 0x04 )
-
-/* Clear the entropy pool and associated counters.  (Superuser only.) */
-#define RNDCLEARPOOL	_IO( 'R', 0x06 )
-
-struct rand_pool_info {
-	int	entropy_count;
-	int	buf_size;
-	__u32	buf[0];
-};
-
-struct rnd_state {
-	__u32 s1, s2, s3;
-};
-
-/* Exported functions */
-
-#ifdef __KERNEL__
 
 extern void add_device_randomness(const void *, unsigned int);
 extern void add_input_randomness(unsigned int type, unsigned int code,
@@ -104,6 +65,4 @@
 }
 #endif
 
-#endif /* __KERNEL___ */
-
 #endif /* _LINUX_RANDOM_H */
diff --git a/include/linux/reboot.h b/include/linux/reboot.h
index e0879a7..23b3630 100644
--- a/include/linux/reboot.h
+++ b/include/linux/reboot.h
@@ -1,43 +1,9 @@
 #ifndef _LINUX_REBOOT_H
 #define _LINUX_REBOOT_H
 
-/*
- * Magic values required to use _reboot() system call.
- */
-
-#define	LINUX_REBOOT_MAGIC1	0xfee1dead
-#define	LINUX_REBOOT_MAGIC2	672274793
-#define	LINUX_REBOOT_MAGIC2A	85072278
-#define	LINUX_REBOOT_MAGIC2B	369367448
-#define	LINUX_REBOOT_MAGIC2C	537993216
-
-
-/*
- * Commands accepted by the _reboot() system call.
- *
- * RESTART     Restart system using default command and mode.
- * HALT        Stop OS and give system control to ROM monitor, if any.
- * CAD_ON      Ctrl-Alt-Del sequence causes RESTART command.
- * CAD_OFF     Ctrl-Alt-Del sequence sends SIGINT to init task.
- * POWER_OFF   Stop OS and remove all power from system, if possible.
- * RESTART2    Restart system using given command string.
- * SW_SUSPEND  Suspend system using software suspend if compiled in.
- * KEXEC       Restart system using a previously loaded Linux kernel
- */
-
-#define	LINUX_REBOOT_CMD_RESTART	0x01234567
-#define	LINUX_REBOOT_CMD_HALT		0xCDEF0123
-#define	LINUX_REBOOT_CMD_CAD_ON		0x89ABCDEF
-#define	LINUX_REBOOT_CMD_CAD_OFF	0x00000000
-#define	LINUX_REBOOT_CMD_POWER_OFF	0x4321FEDC
-#define	LINUX_REBOOT_CMD_RESTART2	0xA1B2C3D4
-#define	LINUX_REBOOT_CMD_SW_SUSPEND	0xD000FCE2
-#define	LINUX_REBOOT_CMD_KEXEC		0x45584543
-
-
-#ifdef __KERNEL__
 
 #include <linux/notifier.h>
+#include <uapi/linux/reboot.h>
 
 #define SYS_DOWN	0x0001	/* Notify of system down */
 #define SYS_RESTART	SYS_DOWN
@@ -84,6 +50,4 @@
 extern void emergency_restart(void);
 #include <asm/emergency-restart.h>
 
-#endif
-
 #endif /* _LINUX_REBOOT_H */
diff --git a/include/linux/resource.h b/include/linux/resource.h
index d01c96c..5bc3116 100644
--- a/include/linux/resource.h
+++ b/include/linux/resource.h
@@ -1,82 +1,8 @@
 #ifndef _LINUX_RESOURCE_H
 #define _LINUX_RESOURCE_H
 
-#include <linux/time.h>
-#include <linux/types.h>
+#include <uapi/linux/resource.h>
 
-/*
- * Resource control/accounting header file for linux
- */
-
-/*
- * Definition of struct rusage taken from BSD 4.3 Reno
- * 
- * We don't support all of these yet, but we might as well have them....
- * Otherwise, each time we add new items, programs which depend on this
- * structure will lose.  This reduces the chances of that happening.
- */
-#define	RUSAGE_SELF	0
-#define	RUSAGE_CHILDREN	(-1)
-#define RUSAGE_BOTH	(-2)		/* sys_wait4() uses this */
-#define	RUSAGE_THREAD	1		/* only the calling thread */
-
-struct	rusage {
-	struct timeval ru_utime;	/* user time used */
-	struct timeval ru_stime;	/* system time used */
-	long	ru_maxrss;		/* maximum resident set size */
-	long	ru_ixrss;		/* integral shared memory size */
-	long	ru_idrss;		/* integral unshared data size */
-	long	ru_isrss;		/* integral unshared stack size */
-	long	ru_minflt;		/* page reclaims */
-	long	ru_majflt;		/* page faults */
-	long	ru_nswap;		/* swaps */
-	long	ru_inblock;		/* block input operations */
-	long	ru_oublock;		/* block output operations */
-	long	ru_msgsnd;		/* messages sent */
-	long	ru_msgrcv;		/* messages received */
-	long	ru_nsignals;		/* signals received */
-	long	ru_nvcsw;		/* voluntary context switches */
-	long	ru_nivcsw;		/* involuntary " */
-};
-
-struct rlimit {
-	unsigned long	rlim_cur;
-	unsigned long	rlim_max;
-};
-
-#define RLIM64_INFINITY		(~0ULL)
-
-struct rlimit64 {
-	__u64 rlim_cur;
-	__u64 rlim_max;
-};
-
-#define	PRIO_MIN	(-20)
-#define	PRIO_MAX	20
-
-#define	PRIO_PROCESS	0
-#define	PRIO_PGRP	1
-#define	PRIO_USER	2
-
-/*
- * Limit the stack by to some sane default: root can always
- * increase this limit if needed..  8MB seems reasonable.
- */
-#define _STK_LIM	(8*1024*1024)
-
-/*
- * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
- * and other sensitive information are never written to disk.
- */
-#define MLOCK_LIMIT	((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
-
-/*
- * Due to binary compatibility, the actual resource numbers
- * may be different for different linux versions..
- */
-#include <asm/resource.h>
-
-#ifdef __KERNEL__
 
 struct task_struct;
 
@@ -84,6 +10,4 @@
 int do_prlimit(struct task_struct *tsk, unsigned int resource,
 		struct rlimit *new_rlim, struct rlimit *old_rlim);
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 0ec590b..d901078 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -1,6 +1,3 @@
-#ifndef __RFKILL_H
-#define __RFKILL_H
-
 /*
  * Copyright (C) 2006 - 2007 Ivo van Doorn
  * Copyright (C) 2007 Dmitry Torokhov
@@ -18,92 +15,11 @@
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
+#ifndef __RFKILL_H
+#define __RFKILL_H
 
-#include <linux/types.h>
+#include <uapi/linux/rfkill.h>
 
-/* define userspace visible states */
-#define RFKILL_STATE_SOFT_BLOCKED	0
-#define RFKILL_STATE_UNBLOCKED		1
-#define RFKILL_STATE_HARD_BLOCKED	2
-
-/**
- * enum rfkill_type - type of rfkill switch.
- *
- * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
- * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
- * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
- * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
- * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
- * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
- * @RFKILL_TYPE_GPS: switch is on a GPS device.
- * @RFKILL_TYPE_FM: switch is on a FM radio device.
- * @NUM_RFKILL_TYPES: number of defined rfkill types
- */
-enum rfkill_type {
-	RFKILL_TYPE_ALL = 0,
-	RFKILL_TYPE_WLAN,
-	RFKILL_TYPE_BLUETOOTH,
-	RFKILL_TYPE_UWB,
-	RFKILL_TYPE_WIMAX,
-	RFKILL_TYPE_WWAN,
-	RFKILL_TYPE_GPS,
-	RFKILL_TYPE_FM,
-	NUM_RFKILL_TYPES,
-};
-
-/**
- * enum rfkill_operation - operation types
- * @RFKILL_OP_ADD: a device was added
- * @RFKILL_OP_DEL: a device was removed
- * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
- * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
- */
-enum rfkill_operation {
-	RFKILL_OP_ADD = 0,
-	RFKILL_OP_DEL,
-	RFKILL_OP_CHANGE,
-	RFKILL_OP_CHANGE_ALL,
-};
-
-/**
- * struct rfkill_event - events for userspace on /dev/rfkill
- * @idx: index of dev rfkill
- * @type: type of the rfkill struct
- * @op: operation code
- * @hard: hard state (0/1)
- * @soft: soft state (0/1)
- *
- * Structure used for userspace communication on /dev/rfkill,
- * used for events from the kernel and control to the kernel.
- */
-struct rfkill_event {
-	__u32 idx;
-	__u8  type;
-	__u8  op;
-	__u8  soft, hard;
-} __attribute__((packed));
-
-/*
- * We are planning to be backward and forward compatible with changes
- * to the event struct, by adding new, optional, members at the end.
- * When reading an event (whether the kernel from userspace or vice
- * versa) we need to accept anything that's at least as large as the
- * version 1 event size, but might be able to accept other sizes in
- * the future.
- *
- * One exception is the kernel -- we already have two event sizes in
- * that we've made the 'hard' member optional since our only option
- * is to ignore it anyway.
- */
-#define RFKILL_EVENT_SIZE_V1	8
-
-/* ioctl for turning off rfkill-input (if present) */
-#define RFKILL_IOC_MAGIC	'R'
-#define RFKILL_IOC_NOINPUT	1
-#define RFKILL_IOCTL_NOINPUT	_IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
-
-/* and that's all userspace gets */
-#ifdef __KERNEL__
 /* don't allow anyone to use these in the kernel */
 enum rfkill_user_states {
 	RFKILL_USER_STATE_SOFT_BLOCKED	= RFKILL_STATE_SOFT_BLOCKED,
@@ -385,6 +301,4 @@
 }
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* RFKILL_H */
diff --git a/include/linux/rtc.h b/include/linux/rtc.h
index 20ec4d3..9531845c 100644
--- a/include/linux/rtc.h
+++ b/include/linux/rtc.h
@@ -11,102 +11,10 @@
 #ifndef _LINUX_RTC_H_
 #define _LINUX_RTC_H_
 
-/*
- * The struct used to pass data via the following ioctl. Similar to the
- * struct tm in <time.h>, but it needs to be here so that the kernel
- * source is self contained, allowing cross-compiles, etc. etc.
- */
-
-struct rtc_time {
-	int tm_sec;
-	int tm_min;
-	int tm_hour;
-	int tm_mday;
-	int tm_mon;
-	int tm_year;
-	int tm_wday;
-	int tm_yday;
-	int tm_isdst;
-};
-
-/*
- * This data structure is inspired by the EFI (v0.92) wakeup
- * alarm API.
- */
-struct rtc_wkalrm {
-	unsigned char enabled;	/* 0 = alarm disabled, 1 = alarm enabled */
-	unsigned char pending;  /* 0 = alarm not pending, 1 = alarm pending */
-	struct rtc_time time;	/* time the alarm is set to */
-};
-
-/*
- * Data structure to control PLL correction some better RTC feature
- * pll_value is used to get or set current value of correction,
- * the rest of the struct is used to query HW capabilities.
- * This is modeled after the RTC used in Q40/Q60 computers but
- * should be sufficiently flexible for other devices
- *
- * +ve pll_value means clock will run faster by
- *   pll_value*pll_posmult/pll_clock
- * -ve pll_value means clock will run slower by
- *   pll_value*pll_negmult/pll_clock
- */
-
-struct rtc_pll_info {
-	int pll_ctrl;       /* placeholder for fancier control */
-	int pll_value;      /* get/set correction value */
-	int pll_max;        /* max +ve (faster) adjustment value */
-	int pll_min;        /* max -ve (slower) adjustment value */
-	int pll_posmult;    /* factor for +ve correction */
-	int pll_negmult;    /* factor for -ve correction */
-	long pll_clock;     /* base PLL frequency */
-};
-
-/*
- * ioctl calls that are permitted to the /dev/rtc interface, if
- * any of the RTC drivers are enabled.
- */
-
-#define RTC_AIE_ON	_IO('p', 0x01)	/* Alarm int. enable on		*/
-#define RTC_AIE_OFF	_IO('p', 0x02)	/* ... off			*/
-#define RTC_UIE_ON	_IO('p', 0x03)	/* Update int. enable on	*/
-#define RTC_UIE_OFF	_IO('p', 0x04)	/* ... off			*/
-#define RTC_PIE_ON	_IO('p', 0x05)	/* Periodic int. enable on	*/
-#define RTC_PIE_OFF	_IO('p', 0x06)	/* ... off			*/
-#define RTC_WIE_ON	_IO('p', 0x0f)  /* Watchdog int. enable on	*/
-#define RTC_WIE_OFF	_IO('p', 0x10)  /* ... off			*/
-
-#define RTC_ALM_SET	_IOW('p', 0x07, struct rtc_time) /* Set alarm time  */
-#define RTC_ALM_READ	_IOR('p', 0x08, struct rtc_time) /* Read alarm time */
-#define RTC_RD_TIME	_IOR('p', 0x09, struct rtc_time) /* Read RTC time   */
-#define RTC_SET_TIME	_IOW('p', 0x0a, struct rtc_time) /* Set RTC time    */
-#define RTC_IRQP_READ	_IOR('p', 0x0b, unsigned long)	 /* Read IRQ rate   */
-#define RTC_IRQP_SET	_IOW('p', 0x0c, unsigned long)	 /* Set IRQ rate    */
-#define RTC_EPOCH_READ	_IOR('p', 0x0d, unsigned long)	 /* Read epoch      */
-#define RTC_EPOCH_SET	_IOW('p', 0x0e, unsigned long)	 /* Set epoch       */
-
-#define RTC_WKALM_SET	_IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
-#define RTC_WKALM_RD	_IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
-
-#define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
-#define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
-
-#define RTC_VL_READ	_IOR('p', 0x13, int)	/* Voltage low detector */
-#define RTC_VL_CLR	_IO('p', 0x14)		/* Clear voltage low information */
-
-/* interrupt flags */
-#define RTC_IRQF 0x80	/* Any of the following is active */
-#define RTC_PF 0x40	/* Periodic interrupt */
-#define RTC_AF 0x20	/* Alarm interrupt */
-#define RTC_UF 0x10	/* Update interrupt for 1Hz RTC */
-
-
-#define RTC_MAX_FREQ	8192
-
-#ifdef __KERNEL__
 
 #include <linux/types.h>
 #include <linux/interrupt.h>
+#include <uapi/linux/rtc.h>
 
 extern int rtc_month_days(unsigned int month, unsigned int year);
 extern int rtc_year_days(unsigned int day, unsigned int month, unsigned int year);
@@ -282,6 +190,4 @@
 #define rtc_hctosys_ret -ENODEV
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_RTC_H_ */
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index db71c4a..7002bbf 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -1,616 +1,10 @@
 #ifndef __LINUX_RTNETLINK_H
 #define __LINUX_RTNETLINK_H
 
-#include <linux/types.h>
-#include <linux/netlink.h>
-#include <linux/if_link.h>
-#include <linux/if_addr.h>
-#include <linux/neighbour.h>
-
-/* rtnetlink families. Values up to 127 are reserved for real address
- * families, values above 128 may be used arbitrarily.
- */
-#define RTNL_FAMILY_IPMR		128
-#define RTNL_FAMILY_IP6MR		129
-#define RTNL_FAMILY_MAX			129
-
-/****
- *		Routing/neighbour discovery messages.
- ****/
-
-/* Types of messages */
-
-enum {
-	RTM_BASE	= 16,
-#define RTM_BASE	RTM_BASE
-
-	RTM_NEWLINK	= 16,
-#define RTM_NEWLINK	RTM_NEWLINK
-	RTM_DELLINK,
-#define RTM_DELLINK	RTM_DELLINK
-	RTM_GETLINK,
-#define RTM_GETLINK	RTM_GETLINK
-	RTM_SETLINK,
-#define RTM_SETLINK	RTM_SETLINK
-
-	RTM_NEWADDR	= 20,
-#define RTM_NEWADDR	RTM_NEWADDR
-	RTM_DELADDR,
-#define RTM_DELADDR	RTM_DELADDR
-	RTM_GETADDR,
-#define RTM_GETADDR	RTM_GETADDR
-
-	RTM_NEWROUTE	= 24,
-#define RTM_NEWROUTE	RTM_NEWROUTE
-	RTM_DELROUTE,
-#define RTM_DELROUTE	RTM_DELROUTE
-	RTM_GETROUTE,
-#define RTM_GETROUTE	RTM_GETROUTE
-
-	RTM_NEWNEIGH	= 28,
-#define RTM_NEWNEIGH	RTM_NEWNEIGH
-	RTM_DELNEIGH,
-#define RTM_DELNEIGH	RTM_DELNEIGH
-	RTM_GETNEIGH,
-#define RTM_GETNEIGH	RTM_GETNEIGH
-
-	RTM_NEWRULE	= 32,
-#define RTM_NEWRULE	RTM_NEWRULE
-	RTM_DELRULE,
-#define RTM_DELRULE	RTM_DELRULE
-	RTM_GETRULE,
-#define RTM_GETRULE	RTM_GETRULE
-
-	RTM_NEWQDISC	= 36,
-#define RTM_NEWQDISC	RTM_NEWQDISC
-	RTM_DELQDISC,
-#define RTM_DELQDISC	RTM_DELQDISC
-	RTM_GETQDISC,
-#define RTM_GETQDISC	RTM_GETQDISC
-
-	RTM_NEWTCLASS	= 40,
-#define RTM_NEWTCLASS	RTM_NEWTCLASS
-	RTM_DELTCLASS,
-#define RTM_DELTCLASS	RTM_DELTCLASS
-	RTM_GETTCLASS,
-#define RTM_GETTCLASS	RTM_GETTCLASS
-
-	RTM_NEWTFILTER	= 44,
-#define RTM_NEWTFILTER	RTM_NEWTFILTER
-	RTM_DELTFILTER,
-#define RTM_DELTFILTER	RTM_DELTFILTER
-	RTM_GETTFILTER,
-#define RTM_GETTFILTER	RTM_GETTFILTER
-
-	RTM_NEWACTION	= 48,
-#define RTM_NEWACTION   RTM_NEWACTION
-	RTM_DELACTION,
-#define RTM_DELACTION   RTM_DELACTION
-	RTM_GETACTION,
-#define RTM_GETACTION   RTM_GETACTION
-
-	RTM_NEWPREFIX	= 52,
-#define RTM_NEWPREFIX	RTM_NEWPREFIX
-
-	RTM_GETMULTICAST = 58,
-#define RTM_GETMULTICAST RTM_GETMULTICAST
-
-	RTM_GETANYCAST	= 62,
-#define RTM_GETANYCAST	RTM_GETANYCAST
-
-	RTM_NEWNEIGHTBL	= 64,
-#define RTM_NEWNEIGHTBL	RTM_NEWNEIGHTBL
-	RTM_GETNEIGHTBL	= 66,
-#define RTM_GETNEIGHTBL	RTM_GETNEIGHTBL
-	RTM_SETNEIGHTBL,
-#define RTM_SETNEIGHTBL	RTM_SETNEIGHTBL
-
-	RTM_NEWNDUSEROPT = 68,
-#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT
-
-	RTM_NEWADDRLABEL = 72,
-#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
-	RTM_DELADDRLABEL,
-#define RTM_DELADDRLABEL RTM_DELADDRLABEL
-	RTM_GETADDRLABEL,
-#define RTM_GETADDRLABEL RTM_GETADDRLABEL
-
-	RTM_GETDCB = 78,
-#define RTM_GETDCB RTM_GETDCB
-	RTM_SETDCB,
-#define RTM_SETDCB RTM_SETDCB
-
-	__RTM_MAX,
-#define RTM_MAX		(((__RTM_MAX + 3) & ~3) - 1)
-};
-
-#define RTM_NR_MSGTYPES	(RTM_MAX + 1 - RTM_BASE)
-#define RTM_NR_FAMILIES	(RTM_NR_MSGTYPES >> 2)
-#define RTM_FAM(cmd)	(((cmd) - RTM_BASE) >> 2)
-
-/* 
-   Generic structure for encapsulation of optional route information.
-   It is reminiscent of sockaddr, but with sa_family replaced
-   with attribute type.
- */
-
-struct rtattr {
-	unsigned short	rta_len;
-	unsigned short	rta_type;
-};
-
-/* Macros to handle rtattributes */
-
-#define RTA_ALIGNTO	4
-#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
-#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
-			 (rta)->rta_len >= sizeof(struct rtattr) && \
-			 (rta)->rta_len <= (len))
-#define RTA_NEXT(rta,attrlen)	((attrlen) -= RTA_ALIGN((rta)->rta_len), \
-				 (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len)))
-#define RTA_LENGTH(len)	(RTA_ALIGN(sizeof(struct rtattr)) + (len))
-#define RTA_SPACE(len)	RTA_ALIGN(RTA_LENGTH(len))
-#define RTA_DATA(rta)   ((void*)(((char*)(rta)) + RTA_LENGTH(0)))
-#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0))
-
-
-
-
-/******************************************************************************
- *		Definitions used in routing table administration.
- ****/
-
-struct rtmsg {
-	unsigned char		rtm_family;
-	unsigned char		rtm_dst_len;
-	unsigned char		rtm_src_len;
-	unsigned char		rtm_tos;
-
-	unsigned char		rtm_table;	/* Routing table id */
-	unsigned char		rtm_protocol;	/* Routing protocol; see below	*/
-	unsigned char		rtm_scope;	/* See below */	
-	unsigned char		rtm_type;	/* See below	*/
-
-	unsigned		rtm_flags;
-};
-
-/* rtm_type */
-
-enum {
-	RTN_UNSPEC,
-	RTN_UNICAST,		/* Gateway or direct route	*/
-	RTN_LOCAL,		/* Accept locally		*/
-	RTN_BROADCAST,		/* Accept locally as broadcast,
-				   send as broadcast */
-	RTN_ANYCAST,		/* Accept locally as broadcast,
-				   but send as unicast */
-	RTN_MULTICAST,		/* Multicast route		*/
-	RTN_BLACKHOLE,		/* Drop				*/
-	RTN_UNREACHABLE,	/* Destination is unreachable   */
-	RTN_PROHIBIT,		/* Administratively prohibited	*/
-	RTN_THROW,		/* Not in this table		*/
-	RTN_NAT,		/* Translate this address	*/
-	RTN_XRESOLVE,		/* Use external resolver	*/
-	__RTN_MAX
-};
-
-#define RTN_MAX (__RTN_MAX - 1)
-
-
-/* rtm_protocol */
-
-#define RTPROT_UNSPEC	0
-#define RTPROT_REDIRECT	1	/* Route installed by ICMP redirects;
-				   not used by current IPv4 */
-#define RTPROT_KERNEL	2	/* Route installed by kernel		*/
-#define RTPROT_BOOT	3	/* Route installed during boot		*/
-#define RTPROT_STATIC	4	/* Route installed by administrator	*/
-
-/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel;
-   they are just passed from user and back as is.
-   It will be used by hypothetical multiple routing daemons.
-   Note that protocol values should be standardized in order to
-   avoid conflicts.
- */
-
-#define RTPROT_GATED	8	/* Apparently, GateD */
-#define RTPROT_RA	9	/* RDISC/ND router advertisements */
-#define RTPROT_MRT	10	/* Merit MRT */
-#define RTPROT_ZEBRA	11	/* Zebra */
-#define RTPROT_BIRD	12	/* BIRD */
-#define RTPROT_DNROUTED	13	/* DECnet routing daemon */
-#define RTPROT_XORP	14	/* XORP */
-#define RTPROT_NTK	15	/* Netsukuku */
-#define RTPROT_DHCP	16      /* DHCP client */
-
-/* rtm_scope
-
-   Really it is not scope, but sort of distance to the destination.
-   NOWHERE are reserved for not existing destinations, HOST is our
-   local addresses, LINK are destinations, located on directly attached
-   link and UNIVERSE is everywhere in the Universe.
-
-   Intermediate values are also possible f.e. interior routes
-   could be assigned a value between UNIVERSE and LINK.
-*/
-
-enum rt_scope_t {
-	RT_SCOPE_UNIVERSE=0,
-/* User defined values  */
-	RT_SCOPE_SITE=200,
-	RT_SCOPE_LINK=253,
-	RT_SCOPE_HOST=254,
-	RT_SCOPE_NOWHERE=255
-};
-
-/* rtm_flags */
-
-#define RTM_F_NOTIFY		0x100	/* Notify user of route change	*/
-#define RTM_F_CLONED		0x200	/* This route is cloned		*/
-#define RTM_F_EQUALIZE		0x400	/* Multipath equalizer: NI	*/
-#define RTM_F_PREFIX		0x800	/* Prefix addresses		*/
-
-/* Reserved table identifiers */
-
-enum rt_class_t {
-	RT_TABLE_UNSPEC=0,
-/* User defined values */
-	RT_TABLE_COMPAT=252,
-	RT_TABLE_DEFAULT=253,
-	RT_TABLE_MAIN=254,
-	RT_TABLE_LOCAL=255,
-	RT_TABLE_MAX=0xFFFFFFFF
-};
-
-
-/* Routing message attributes */
-
-enum rtattr_type_t {
-	RTA_UNSPEC,
-	RTA_DST,
-	RTA_SRC,
-	RTA_IIF,
-	RTA_OIF,
-	RTA_GATEWAY,
-	RTA_PRIORITY,
-	RTA_PREFSRC,
-	RTA_METRICS,
-	RTA_MULTIPATH,
-	RTA_PROTOINFO, /* no longer used */
-	RTA_FLOW,
-	RTA_CACHEINFO,
-	RTA_SESSION, /* no longer used */
-	RTA_MP_ALGO, /* no longer used */
-	RTA_TABLE,
-	RTA_MARK,
-	__RTA_MAX
-};
-
-#define RTA_MAX (__RTA_MAX - 1)
-
-#define RTM_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg))))
-#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg))
-
-/* RTM_MULTIPATH --- array of struct rtnexthop.
- *
- * "struct rtnexthop" describes all necessary nexthop information,
- * i.e. parameters of path to a destination via this nexthop.
- *
- * At the moment it is impossible to set different prefsrc, mtu, window
- * and rtt for different paths from multipath.
- */
-
-struct rtnexthop {
-	unsigned short		rtnh_len;
-	unsigned char		rtnh_flags;
-	unsigned char		rtnh_hops;
-	int			rtnh_ifindex;
-};
-
-/* rtnh_flags */
-
-#define RTNH_F_DEAD		1	/* Nexthop is dead (used by multipath)	*/
-#define RTNH_F_PERVASIVE	2	/* Do recursive gateway lookup	*/
-#define RTNH_F_ONLINK		4	/* Gateway is forced on link	*/
-
-/* Macros to handle hexthops */
-
-#define RTNH_ALIGNTO	4
-#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) )
-#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \
-			   ((int)(rtnh)->rtnh_len) <= (len))
-#define RTNH_NEXT(rtnh)	((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len)))
-#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len))
-#define RTNH_SPACE(len)	RTNH_ALIGN(RTNH_LENGTH(len))
-#define RTNH_DATA(rtnh)   ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0)))
-
-/* RTM_CACHEINFO */
-
-struct rta_cacheinfo {
-	__u32	rta_clntref;
-	__u32	rta_lastuse;
-	__s32	rta_expires;
-	__u32	rta_error;
-	__u32	rta_used;
-
-#define RTNETLINK_HAVE_PEERINFO 1
-	__u32	rta_id;
-	__u32	rta_ts;
-	__u32	rta_tsage;
-};
-
-/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
-
-enum {
-	RTAX_UNSPEC,
-#define RTAX_UNSPEC RTAX_UNSPEC
-	RTAX_LOCK,
-#define RTAX_LOCK RTAX_LOCK
-	RTAX_MTU,
-#define RTAX_MTU RTAX_MTU
-	RTAX_WINDOW,
-#define RTAX_WINDOW RTAX_WINDOW
-	RTAX_RTT,
-#define RTAX_RTT RTAX_RTT
-	RTAX_RTTVAR,
-#define RTAX_RTTVAR RTAX_RTTVAR
-	RTAX_SSTHRESH,
-#define RTAX_SSTHRESH RTAX_SSTHRESH
-	RTAX_CWND,
-#define RTAX_CWND RTAX_CWND
-	RTAX_ADVMSS,
-#define RTAX_ADVMSS RTAX_ADVMSS
-	RTAX_REORDERING,
-#define RTAX_REORDERING RTAX_REORDERING
-	RTAX_HOPLIMIT,
-#define RTAX_HOPLIMIT RTAX_HOPLIMIT
-	RTAX_INITCWND,
-#define RTAX_INITCWND RTAX_INITCWND
-	RTAX_FEATURES,
-#define RTAX_FEATURES RTAX_FEATURES
-	RTAX_RTO_MIN,
-#define RTAX_RTO_MIN RTAX_RTO_MIN
-	RTAX_INITRWND,
-#define RTAX_INITRWND RTAX_INITRWND
-	__RTAX_MAX
-};
-
-#define RTAX_MAX (__RTAX_MAX - 1)
-
-#define RTAX_FEATURE_ECN	0x00000001
-#define RTAX_FEATURE_SACK	0x00000002
-#define RTAX_FEATURE_TIMESTAMP	0x00000004
-#define RTAX_FEATURE_ALLFRAG	0x00000008
-
-struct rta_session {
-	__u8	proto;
-	__u8	pad1;
-	__u16	pad2;
-
-	union {
-		struct {
-			__u16	sport;
-			__u16	dport;
-		} ports;
-
-		struct {
-			__u8	type;
-			__u8	code;
-			__u16	ident;
-		} icmpt;
-
-		__u32		spi;
-	} u;
-};
-
-/****
- *		General form of address family dependent message.
- ****/
-
-struct rtgenmsg {
-	unsigned char		rtgen_family;
-};
-
-/*****************************************************************
- *		Link layer specific messages.
- ****/
-
-/* struct ifinfomsg
- * passes link level specific information, not dependent
- * on network protocol.
- */
-
-struct ifinfomsg {
-	unsigned char	ifi_family;
-	unsigned char	__ifi_pad;
-	unsigned short	ifi_type;		/* ARPHRD_* */
-	int		ifi_index;		/* Link index	*/
-	unsigned	ifi_flags;		/* IFF_* flags	*/
-	unsigned	ifi_change;		/* IFF_* change mask */
-};
-
-/********************************************************************
- *		prefix information 
- ****/
-
-struct prefixmsg {
-	unsigned char	prefix_family;
-	unsigned char	prefix_pad1;
-	unsigned short	prefix_pad2;
-	int		prefix_ifindex;
-	unsigned char	prefix_type;
-	unsigned char	prefix_len;
-	unsigned char	prefix_flags;
-	unsigned char	prefix_pad3;
-};
-
-enum 
-{
-	PREFIX_UNSPEC,
-	PREFIX_ADDRESS,
-	PREFIX_CACHEINFO,
-	__PREFIX_MAX
-};
-
-#define PREFIX_MAX	(__PREFIX_MAX - 1)
-
-struct prefix_cacheinfo {
-	__u32	preferred_time;
-	__u32	valid_time;
-};
-
-
-/*****************************************************************
- *		Traffic control messages.
- ****/
-
-struct tcmsg {
-	unsigned char	tcm_family;
-	unsigned char	tcm__pad1;
-	unsigned short	tcm__pad2;
-	int		tcm_ifindex;
-	__u32		tcm_handle;
-	__u32		tcm_parent;
-	__u32		tcm_info;
-};
-
-enum {
-	TCA_UNSPEC,
-	TCA_KIND,
-	TCA_OPTIONS,
-	TCA_STATS,
-	TCA_XSTATS,
-	TCA_RATE,
-	TCA_FCNT,
-	TCA_STATS2,
-	TCA_STAB,
-	__TCA_MAX
-};
-
-#define TCA_MAX (__TCA_MAX - 1)
-
-#define TCA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
-#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
-
-/********************************************************************
- *		Neighbor Discovery userland options
- ****/
-
-struct nduseroptmsg {
-	unsigned char	nduseropt_family;
-	unsigned char	nduseropt_pad1;
-	unsigned short	nduseropt_opts_len;	/* Total length of options */
-	int		nduseropt_ifindex;
-	__u8		nduseropt_icmp_type;
-	__u8		nduseropt_icmp_code;
-	unsigned short	nduseropt_pad2;
-	unsigned int	nduseropt_pad3;
-	/* Followed by one or more ND options */
-};
-
-enum {
-	NDUSEROPT_UNSPEC,
-	NDUSEROPT_SRCADDR,
-	__NDUSEROPT_MAX
-};
-
-#define NDUSEROPT_MAX	(__NDUSEROPT_MAX - 1)
-
-#ifndef __KERNEL__
-/* RTnetlink multicast groups - backwards compatibility for userspace */
-#define RTMGRP_LINK		1
-#define RTMGRP_NOTIFY		2
-#define RTMGRP_NEIGH		4
-#define RTMGRP_TC		8
-
-#define RTMGRP_IPV4_IFADDR	0x10
-#define RTMGRP_IPV4_MROUTE	0x20
-#define RTMGRP_IPV4_ROUTE	0x40
-#define RTMGRP_IPV4_RULE	0x80
-
-#define RTMGRP_IPV6_IFADDR	0x100
-#define RTMGRP_IPV6_MROUTE	0x200
-#define RTMGRP_IPV6_ROUTE	0x400
-#define RTMGRP_IPV6_IFINFO	0x800
-
-#define RTMGRP_DECnet_IFADDR    0x1000
-#define RTMGRP_DECnet_ROUTE     0x4000
-
-#define RTMGRP_IPV6_PREFIX	0x20000
-#endif
-
-/* RTnetlink multicast groups */
-enum rtnetlink_groups {
-	RTNLGRP_NONE,
-#define RTNLGRP_NONE		RTNLGRP_NONE
-	RTNLGRP_LINK,
-#define RTNLGRP_LINK		RTNLGRP_LINK
-	RTNLGRP_NOTIFY,
-#define RTNLGRP_NOTIFY		RTNLGRP_NOTIFY
-	RTNLGRP_NEIGH,
-#define RTNLGRP_NEIGH		RTNLGRP_NEIGH
-	RTNLGRP_TC,
-#define RTNLGRP_TC		RTNLGRP_TC
-	RTNLGRP_IPV4_IFADDR,
-#define RTNLGRP_IPV4_IFADDR	RTNLGRP_IPV4_IFADDR
-	RTNLGRP_IPV4_MROUTE,
-#define	RTNLGRP_IPV4_MROUTE	RTNLGRP_IPV4_MROUTE
-	RTNLGRP_IPV4_ROUTE,
-#define RTNLGRP_IPV4_ROUTE	RTNLGRP_IPV4_ROUTE
-	RTNLGRP_IPV4_RULE,
-#define RTNLGRP_IPV4_RULE	RTNLGRP_IPV4_RULE
-	RTNLGRP_IPV6_IFADDR,
-#define RTNLGRP_IPV6_IFADDR	RTNLGRP_IPV6_IFADDR
-	RTNLGRP_IPV6_MROUTE,
-#define RTNLGRP_IPV6_MROUTE	RTNLGRP_IPV6_MROUTE
-	RTNLGRP_IPV6_ROUTE,
-#define RTNLGRP_IPV6_ROUTE	RTNLGRP_IPV6_ROUTE
-	RTNLGRP_IPV6_IFINFO,
-#define RTNLGRP_IPV6_IFINFO	RTNLGRP_IPV6_IFINFO
-	RTNLGRP_DECnet_IFADDR,
-#define RTNLGRP_DECnet_IFADDR	RTNLGRP_DECnet_IFADDR
-	RTNLGRP_NOP2,
-	RTNLGRP_DECnet_ROUTE,
-#define RTNLGRP_DECnet_ROUTE	RTNLGRP_DECnet_ROUTE
-	RTNLGRP_DECnet_RULE,
-#define RTNLGRP_DECnet_RULE	RTNLGRP_DECnet_RULE
-	RTNLGRP_NOP4,
-	RTNLGRP_IPV6_PREFIX,
-#define RTNLGRP_IPV6_PREFIX	RTNLGRP_IPV6_PREFIX
-	RTNLGRP_IPV6_RULE,
-#define RTNLGRP_IPV6_RULE	RTNLGRP_IPV6_RULE
-	RTNLGRP_ND_USEROPT,
-#define RTNLGRP_ND_USEROPT	RTNLGRP_ND_USEROPT
-	RTNLGRP_PHONET_IFADDR,
-#define RTNLGRP_PHONET_IFADDR	RTNLGRP_PHONET_IFADDR
-	RTNLGRP_PHONET_ROUTE,
-#define RTNLGRP_PHONET_ROUTE	RTNLGRP_PHONET_ROUTE
-	RTNLGRP_DCB,
-#define RTNLGRP_DCB		RTNLGRP_DCB
-	__RTNLGRP_MAX
-};
-#define RTNLGRP_MAX	(__RTNLGRP_MAX - 1)
-
-/* TC action piece */
-struct tcamsg {
-	unsigned char	tca_family;
-	unsigned char	tca__pad1;
-	unsigned short	tca__pad2;
-};
-#define TA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg))))
-#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg))
-#define TCA_ACT_TAB 1 /* attr type must be >=1 */	
-#define TCAA_MAX 1
-
-/* New extended info filters for IFLA_EXT_MASK */
-#define RTEXT_FILTER_VF		(1 << 0)
-
-/* End of information exported to user level */
-
-#ifdef __KERNEL__
 
 #include <linux/mutex.h>
 #include <linux/netdevice.h>
+#include <uapi/linux/rtnetlink.h>
 
 extern int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, u32 group, int echo);
 extern int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid);
@@ -675,7 +69,4 @@
 			     struct netlink_callback *cb,
 			     struct net_device *dev,
 			     int idx);
-#endif /* __KERNEL__ */
-
-
 #endif	/* __LINUX_RTNETLINK_H */
diff --git a/include/linux/scc.h b/include/linux/scc.h
index 3495bd9..c5a0049 100644
--- a/include/linux/scc.h
+++ b/include/linux/scc.h
@@ -1,175 +1,9 @@
 /* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
-
 #ifndef	_SCC_H
 #define	_SCC_H
 
+#include <uapi/linux/scc.h>
 
-/* selection of hardware types */
-
-#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */
-#define EAGLE		0x01    /* hardware type for EAGLE card */
-#define PC100		0x02	/* hardware type for PC100 card */
-#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */
-#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */
-#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */
-
-/* DEV ioctl() commands */
-
-enum SCC_ioctl_cmds {
-	SIOCSCCRESERVED = SIOCDEVPRIVATE,
-	SIOCSCCCFG,
-	SIOCSCCINI,
-	SIOCSCCCHANINI,
-	SIOCSCCSMEM,
-	SIOCSCCGKISS,
-	SIOCSCCSKISS,
-	SIOCSCCGSTAT,
-	SIOCSCCCAL
-};
-
-/* Device parameter control (from WAMPES) */
-
-enum L1_params {
-	PARAM_DATA,
-	PARAM_TXDELAY,
-	PARAM_PERSIST,
-	PARAM_SLOTTIME,
-	PARAM_TXTAIL,
-	PARAM_FULLDUP,
-	PARAM_SOFTDCD,		/* was: PARAM_HW */
-	PARAM_MUTE,		/* ??? */
-	PARAM_DTR,
-	PARAM_RTS,
-	PARAM_SPEED,
-	PARAM_ENDDELAY,		/* ??? */
-	PARAM_GROUP,
-	PARAM_IDLE,
-	PARAM_MIN,
-	PARAM_MAXKEY,
-	PARAM_WAIT,
-	PARAM_MAXDEFER,
-	PARAM_TX,
-	PARAM_HWEVENT = 31,
-	PARAM_RETURN = 255	/* reset kiss mode */
-};
-
-/* fulldup parameter */
-
-enum FULLDUP_modes {
-	KISS_DUPLEX_HALF,	/* normal CSMA operation */
-	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */
-	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */
-	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */
-};
-
-/* misc. parameters */
-
-#define TIMER_OFF	65535U	/* to switch off timers */
-#define NO_SUCH_PARAM	65534U	/* param not implemented */
-
-/* HWEVENT parameter */
-
-enum HWEVENT_opts {
-	HWEV_DCD_ON,
-	HWEV_DCD_OFF,
-	HWEV_ALL_SENT
-};
-
-/* channel grouping */
-
-#define RXGROUP		0100	/* if set, only tx when all channels clear */
-#define TXGROUP		0200	/* if set, don't transmit simultaneously */
-
-/* Tx/Rx clock sources */
-
-enum CLOCK_sources {
-	CLK_DPLL,	/* normal halfduplex operation */
-	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */
-	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */
-			/* modems without clock regeneration */
-	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */
-			/* MODEMs without clock recovery */
-};
-
-/* Tx state */
-
-enum TX_state {
-	TXS_IDLE,	/* Transmitter off, no data pending */
-	TXS_BUSY,	/* waiting for permission to send / tailtime */
-	TXS_ACTIVE,	/* Transmitter on, sending data */
-	TXS_NEWFRAME,	/* reset CRC and send (next) frame */
-	TXS_IDLE2,	/* Transmitter on, no data pending */
-	TXS_WAIT,	/* Waiting for Mintime to expire */
-	TXS_TIMEOUT	/* We had a transmission timeout */
-};
-
-typedef unsigned long io_port;	/* type definition for an 'io port address' */
-
-/* SCC statistical information */
-
-struct scc_stat {
-        long rxints;            /* Receiver interrupts */
-        long txints;            /* Transmitter interrupts */
-        long exints;            /* External/status interrupts */
-        long spints;            /* Special receiver interrupts */
-
-        long txframes;          /* Packets sent */
-        long rxframes;          /* Number of Frames Actually Received */
-        long rxerrs;            /* CRC Errors */
-        long txerrs;		/* KISS errors */
-        
-	unsigned int nospace;	/* "Out of buffers" */
-	unsigned int rx_over;	/* Receiver Overruns */
-	unsigned int tx_under;	/* Transmitter Underruns */
-
-	unsigned int tx_state;	/* Transmitter state */
-	int tx_queued;		/* tx frames enqueued */
-
-	unsigned int maxqueue;	/* allocated tx_buffers */
-	unsigned int bufsize;	/* used buffersize */
-};
-
-struct scc_modem {
-	long speed;		/* Line speed, bps */
-	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */
-	char nrz;		/* NRZ instead of NRZI */	
-};
-
-struct scc_kiss_cmd {
-	int  	 command;	/* one of the KISS-Commands defined above */
-	unsigned param;		/* KISS-Param */
-};
-
-struct scc_hw_config {
-	io_port data_a;		/* data port channel A */
-	io_port ctrl_a;		/* control port channel A */
-	io_port data_b;		/* data port channel B */
-	io_port ctrl_b;		/* control port channel B */
-	io_port vector_latch;	/* INTACK-Latch (#) */
-	io_port	special;	/* special function port */
-
-	int	irq;		/* irq */
-	long	clock;		/* clock */
-	char	option;		/* command for function port */
-
-	char brand;		/* hardware type */
-	char escc;		/* use ext. features of a 8580/85180/85280 */
-};
-
-/* (#) only one INTACK latch allowed. */
-
-
-struct scc_mem_config {
-	unsigned int dummy;
-	unsigned int bufsize;
-};
-
-struct scc_calibrate {
-	unsigned int time;
-	unsigned char pattern;
-};
-
-#ifdef __KERNEL__
 
 enum {TX_OFF, TX_ON};	/* command for scc_key_trx() */
 
@@ -248,5 +82,4 @@
 	spinlock_t	lock;		/* Channel guard lock */
 };
 
-#endif /* defined(__KERNEL__) */
 #endif /* defined(_SCC_H) */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index a83ca58..0dd42a0 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1,48 +1,8 @@
 #ifndef _LINUX_SCHED_H
 #define _LINUX_SCHED_H
 
-/*
- * cloning flags:
- */
-#define CSIGNAL		0x000000ff	/* signal mask to be sent at exit */
-#define CLONE_VM	0x00000100	/* set if VM shared between processes */
-#define CLONE_FS	0x00000200	/* set if fs info shared between processes */
-#define CLONE_FILES	0x00000400	/* set if open files shared between processes */
-#define CLONE_SIGHAND	0x00000800	/* set if signal handlers and blocked signals shared */
-#define CLONE_PTRACE	0x00002000	/* set if we want to let tracing continue on the child too */
-#define CLONE_VFORK	0x00004000	/* set if the parent wants the child to wake it up on mm_release */
-#define CLONE_PARENT	0x00008000	/* set if we want to have the same parent as the cloner */
-#define CLONE_THREAD	0x00010000	/* Same thread group? */
-#define CLONE_NEWNS	0x00020000	/* New namespace group? */
-#define CLONE_SYSVSEM	0x00040000	/* share system V SEM_UNDO semantics */
-#define CLONE_SETTLS	0x00080000	/* create a new TLS for the child */
-#define CLONE_PARENT_SETTID	0x00100000	/* set the TID in the parent */
-#define CLONE_CHILD_CLEARTID	0x00200000	/* clear the TID in the child */
-#define CLONE_DETACHED		0x00400000	/* Unused, ignored */
-#define CLONE_UNTRACED		0x00800000	/* set if the tracing process can't force CLONE_PTRACE on this clone */
-#define CLONE_CHILD_SETTID	0x01000000	/* set the TID in the child */
-/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state)
-   and is now available for re-use. */
-#define CLONE_NEWUTS		0x04000000	/* New utsname group? */
-#define CLONE_NEWIPC		0x08000000	/* New ipcs */
-#define CLONE_NEWUSER		0x10000000	/* New user namespace */
-#define CLONE_NEWPID		0x20000000	/* New pid namespace */
-#define CLONE_NEWNET		0x40000000	/* New network namespace */
-#define CLONE_IO		0x80000000	/* Clone io context */
+#include <uapi/linux/sched.h>
 
-/*
- * Scheduling policies
- */
-#define SCHED_NORMAL		0
-#define SCHED_FIFO		1
-#define SCHED_RR		2
-#define SCHED_BATCH		3
-/* SCHED_ISO: reserved but not implemented yet */
-#define SCHED_IDLE		5
-/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
-#define SCHED_RESET_ON_FORK     0x40000000
-
-#ifdef __KERNEL__
 
 struct sched_param {
 	int sched_priority;
@@ -2828,6 +2788,4 @@
 	return task_rlimit_max(current, limit);
 }
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index fb3c5a8..005bf3e 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -1,76 +1,8 @@
 #ifndef _SCREEN_INFO_H
 #define _SCREEN_INFO_H
 
-#include <linux/types.h>
+#include <uapi/linux/screen_info.h>
 
-/*
- * These are set up by the setup-routine at boot-time:
- */
-
-struct screen_info {
-	__u8  orig_x;		/* 0x00 */
-	__u8  orig_y;		/* 0x01 */
-	__u16 ext_mem_k;	/* 0x02 */
-	__u16 orig_video_page;	/* 0x04 */
-	__u8  orig_video_mode;	/* 0x06 */
-	__u8  orig_video_cols;	/* 0x07 */
-	__u8  flags;		/* 0x08 */
-	__u8  unused2;		/* 0x09 */
-	__u16 orig_video_ega_bx;/* 0x0a */
-	__u16 unused3;		/* 0x0c */
-	__u8  orig_video_lines;	/* 0x0e */
-	__u8  orig_video_isVGA;	/* 0x0f */
-	__u16 orig_video_points;/* 0x10 */
-
-	/* VESA graphic mode -- linear frame buffer */
-	__u16 lfb_width;	/* 0x12 */
-	__u16 lfb_height;	/* 0x14 */
-	__u16 lfb_depth;	/* 0x16 */
-	__u32 lfb_base;		/* 0x18 */
-	__u32 lfb_size;		/* 0x1c */
-	__u16 cl_magic, cl_offset; /* 0x20 */
-	__u16 lfb_linelength;	/* 0x24 */
-	__u8  red_size;		/* 0x26 */
-	__u8  red_pos;		/* 0x27 */
-	__u8  green_size;	/* 0x28 */
-	__u8  green_pos;	/* 0x29 */
-	__u8  blue_size;	/* 0x2a */
-	__u8  blue_pos;		/* 0x2b */
-	__u8  rsvd_size;	/* 0x2c */
-	__u8  rsvd_pos;		/* 0x2d */
-	__u16 vesapm_seg;	/* 0x2e */
-	__u16 vesapm_off;	/* 0x30 */
-	__u16 pages;		/* 0x32 */
-	__u16 vesa_attributes;	/* 0x34 */
-	__u32 capabilities;     /* 0x36 */
-	__u8  _reserved[6];	/* 0x3a */
-} __attribute__((packed));
-
-#define VIDEO_TYPE_MDA		0x10	/* Monochrome Text Display	*/
-#define VIDEO_TYPE_CGA		0x11	/* CGA Display 			*/
-#define VIDEO_TYPE_EGAM		0x20	/* EGA/VGA in Monochrome Mode	*/
-#define VIDEO_TYPE_EGAC		0x21	/* EGA in Color Mode		*/
-#define VIDEO_TYPE_VGAC		0x22	/* VGA+ in Color Mode		*/
-#define VIDEO_TYPE_VLFB		0x23	/* VESA VGA in graphic mode	*/
-
-#define VIDEO_TYPE_PICA_S3	0x30	/* ACER PICA-61 local S3 video	*/
-#define VIDEO_TYPE_MIPS_G364	0x31    /* MIPS Magnum 4000 G364 video  */
-#define VIDEO_TYPE_SGI          0x33    /* Various SGI graphics hardware */
-
-#define VIDEO_TYPE_TGAC		0x40	/* DEC TGA */
-
-#define VIDEO_TYPE_SUN          0x50    /* Sun frame buffer. */
-#define VIDEO_TYPE_SUNPCI       0x51    /* Sun PCI based frame buffer. */
-
-#define VIDEO_TYPE_PMAC		0x60	/* PowerMacintosh frame buffer. */
-
-#define VIDEO_TYPE_EFI		0x70	/* EFI graphic mode		*/
-
-#define VIDEO_FLAGS_NOCURSOR	(1 << 0) /* The video mode has no cursor set */
-
-#define VIDEO_CAPABILITY_SKIP_QUIRKS	(1 << 0)
-
-#ifdef __KERNEL__
 extern struct screen_info screen_info;
 
 #define ORIG_X			(screen_info.orig_x)
@@ -81,6 +13,4 @@
 #define ORIG_VIDEO_LINES	(screen_info.orig_video_lines)
 #define ORIG_VIDEO_ISVGA	(screen_info.orig_video_isVGA)
 #define ORIG_VIDEO_POINTS       (screen_info.orig_video_points)
-#endif /* __KERNEL__ */
-
 #endif /* _SCREEN_INFO_H */
diff --git a/include/linux/sdla.h b/include/linux/sdla.h
index 9995c7f..fe7a967 100644
--- a/include/linux/sdla.h
+++ b/include/linux/sdla.h
@@ -19,100 +19,11 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
-
 #ifndef SDLA_H
 #define SDLA_H
 
-/* adapter type */
-#define SDLA_TYPES
-#define SDLA_S502A			5020
-#define SDLA_S502E			5021
-#define SDLA_S503			5030
-#define SDLA_S507			5070
-#define SDLA_S508			5080
-#define SDLA_S509			5090
-#define SDLA_UNKNOWN			-1
+#include <uapi/linux/sdla.h>
 
-/* port selection flags for the S508 */
-#define SDLA_S508_PORT_V35		0x00
-#define SDLA_S508_PORT_RS232		0x02
-
-/* Z80 CPU speeds */
-#define SDLA_CPU_3M			0x00
-#define SDLA_CPU_5M			0x01
-#define SDLA_CPU_7M			0x02
-#define SDLA_CPU_8M			0x03
-#define SDLA_CPU_10M			0x04
-#define SDLA_CPU_16M			0x05
-#define SDLA_CPU_12M			0x06
-
-/* some private IOCTLs */
-#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
-#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
-#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
-
-#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
-#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
-#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
-
-struct sdla_mem {
-   int  addr;
-   int  len;
-   void __user *data;
-};
-
-#define SDLA_START			(FRAD_LAST_IOCTL + 7)
-#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
-
-/* some offsets in the Z80's memory space */
-#define SDLA_NMIADDR			0x0000
-#define SDLA_CONF_ADDR			0x0010
-#define SDLA_S502A_NMIADDR		0x0066
-#define SDLA_CODE_BASEADDR		0x0100
-#define SDLA_WINDOW_SIZE		0x2000
-#define SDLA_ADDR_MASK			0x1FFF
-
-/* largest handleable block of data */
-#define SDLA_MAX_DATA			4080
-#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
-#define SDLA_MAX_DLCI			24
-
-/* this should be the same as frad_conf */
-struct sdla_conf {
-   short station;
-   short config;
-   short kbaud;
-   short clocking;
-   short max_frm;
-   short T391;
-   short T392;
-   short N391;
-   short N392;
-   short N393;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd;
-};
-
-/* this should be the same as dlci_conf */
-struct sdla_dlci_conf {
-   short config;
-   short CIR_fwd;
-   short Bc_fwd;
-   short Be_fwd;
-   short CIR_bwd;
-   short Bc_bwd;
-   short Be_bwd; 
-   short Tc_fwd;
-   short Tc_bwd;
-   short Tf_max;
-   short Tb_max;
-};
-
-#ifdef __KERNEL__
 
 /* important Z80 window addresses */
 #define SDLA_CONTROL_WND		0xE000
@@ -331,5 +242,3 @@
 } __attribute__((packed));
 
 #endif
-
-#endif
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 84f6320d..6f19cfd 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -1,50 +1,8 @@
 #ifndef _LINUX_SECCOMP_H
 #define _LINUX_SECCOMP_H
 
-#include <linux/compiler.h>
-#include <linux/types.h>
+#include <uapi/linux/seccomp.h>
 
-
-/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */
-#define SECCOMP_MODE_DISABLED	0 /* seccomp is not in use. */
-#define SECCOMP_MODE_STRICT	1 /* uses hard-coded filter. */
-#define SECCOMP_MODE_FILTER	2 /* uses user-supplied filter. */
-
-/*
- * All BPF programs must return a 32-bit value.
- * The bottom 16-bits are for optional return data.
- * The upper 16-bits are ordered from least permissive values to most.
- *
- * The ordering ensures that a min_t() over composed return values always
- * selects the least permissive choice.
- */
-#define SECCOMP_RET_KILL	0x00000000U /* kill the task immediately */
-#define SECCOMP_RET_TRAP	0x00030000U /* disallow and force a SIGSYS */
-#define SECCOMP_RET_ERRNO	0x00050000U /* returns an errno */
-#define SECCOMP_RET_TRACE	0x7ff00000U /* pass to a tracer or disallow */
-#define SECCOMP_RET_ALLOW	0x7fff0000U /* allow */
-
-/* Masks for the return value sections. */
-#define SECCOMP_RET_ACTION	0x7fff0000U
-#define SECCOMP_RET_DATA	0x0000ffffU
-
-/**
- * struct seccomp_data - the format the BPF program executes over.
- * @nr: the system call number
- * @arch: indicates system call convention as an AUDIT_ARCH_* value
- *        as defined in <linux/audit.h>.
- * @instruction_pointer: at the time of the system call.
- * @args: up to 6 system call arguments always stored as 64-bit values
- *        regardless of the architecture.
- */
-struct seccomp_data {
-	int nr;
-	__u32 arch;
-	__u64 instruction_pointer;
-	__u64 args[6];
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_SECCOMP
 
 #include <linux/thread_info.h>
@@ -129,5 +87,4 @@
 	return;
 }
 #endif /* CONFIG_SECCOMP_FILTER */
-#endif /* __KERNEL__ */
 #endif /* _LINUX_SECCOMP_H */
diff --git a/include/linux/securebits.h b/include/linux/securebits.h
index 3340617..da1b33b 100644
--- a/include/linux/securebits.h
+++ b/include/linux/securebits.h
@@ -1,54 +1,7 @@
 #ifndef _LINUX_SECUREBITS_H
 #define _LINUX_SECUREBITS_H 1
 
-/* Each securesetting is implemented using two bits. One bit specifies
-   whether the setting is on or off. The other bit specify whether the
-   setting is locked or not. A setting which is locked cannot be
-   changed from user-level. */
-#define issecure_mask(X)	(1 << (X))
-#ifdef __KERNEL__
+#include <uapi/linux/securebits.h>
+
 #define issecure(X)		(issecure_mask(X) & current_cred_xxx(securebits))
-#endif
-
-#define SECUREBITS_DEFAULT 0x00000000
-
-/* When set UID 0 has no special privileges. When unset, we support
-   inheritance of root-permissions and suid-root executable under
-   compatibility mode. We raise the effective and inheritable bitmasks
-   *of the executable file* if the effective uid of the new process is
-   0. If the real uid is 0, we raise the effective (legacy) bit of the
-   executable file. */
-#define SECURE_NOROOT			0
-#define SECURE_NOROOT_LOCKED		1  /* make bit-0 immutable */
-
-#define SECBIT_NOROOT		(issecure_mask(SECURE_NOROOT))
-#define SECBIT_NOROOT_LOCKED	(issecure_mask(SECURE_NOROOT_LOCKED))
-
-/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
-   When unset, to provide compatiblility with old programs relying on
-   set*uid to gain/lose privilege, transitions to/from uid 0 cause
-   capabilities to be gained/lost. */
-#define SECURE_NO_SETUID_FIXUP		2
-#define SECURE_NO_SETUID_FIXUP_LOCKED	3  /* make bit-2 immutable */
-
-#define SECBIT_NO_SETUID_FIXUP	(issecure_mask(SECURE_NO_SETUID_FIXUP))
-#define SECBIT_NO_SETUID_FIXUP_LOCKED \
-			(issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
-
-/* When set, a process can retain its capabilities even after
-   transitioning to a non-root user (the set-uid fixup suppressed by
-   bit 2). Bit-4 is cleared when a process calls exec(); setting both
-   bit 4 and 5 will create a barrier through exec that no exec()'d
-   child can use this feature again. */
-#define SECURE_KEEP_CAPS		4
-#define SECURE_KEEP_CAPS_LOCKED		5  /* make bit-4 immutable */
-
-#define SECBIT_KEEP_CAPS	(issecure_mask(SECURE_KEEP_CAPS))
-#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))
-
-#define SECURE_ALL_BITS		(issecure_mask(SECURE_NOROOT) | \
-				 issecure_mask(SECURE_NO_SETUID_FIXUP) | \
-				 issecure_mask(SECURE_KEEP_CAPS))
-#define SECURE_ALL_LOCKS	(SECURE_ALL_BITS << 1)
-
 #endif /* !_LINUX_SECUREBITS_H */
diff --git a/include/linux/sem.h b/include/linux/sem.h
index 10d6b22..53d4265 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -1,85 +1,10 @@
 #ifndef _LINUX_SEM_H
 #define _LINUX_SEM_H
 
-#include <linux/ipc.h>
-
-/* semop flags */
-#define SEM_UNDO        0x1000  /* undo the operation on exit */
-
-/* semctl Command Definitions. */
-#define GETPID  11       /* get sempid */
-#define GETVAL  12       /* get semval */
-#define GETALL  13       /* get all semval's */
-#define GETNCNT 14       /* get semncnt */
-#define GETZCNT 15       /* get semzcnt */
-#define SETVAL  16       /* set semval */
-#define SETALL  17       /* set all semval's */
-
-/* ipcs ctl cmds */
-#define SEM_STAT 18
-#define SEM_INFO 19
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct semid_ds {
-	struct ipc_perm	sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	__kernel_time_t	sem_ctime;		/* last change time */
-	struct sem	*sem_base;		/* ptr to first semaphore in array */
-	struct sem_queue *sem_pending;		/* pending operations to be processed */
-	struct sem_queue **sem_pending_last;	/* last pending operation */
-	struct sem_undo	*undo;			/* undo requests on this array */
-	unsigned short	sem_nsems;		/* no. of semaphores in array */
-};
-
-/* Include the definition of semid64_ds */
-#include <asm/sembuf.h>
-
-/* semop system calls takes an array of these. */
-struct sembuf {
-	unsigned short  sem_num;	/* semaphore index in array */
-	short		sem_op;		/* semaphore operation */
-	short		sem_flg;	/* operation flags */
-};
-
-/* arg for semctl system calls. */
-union semun {
-	int val;			/* value for SETVAL */
-	struct semid_ds __user *buf;	/* buffer for IPC_STAT & IPC_SET */
-	unsigned short __user *array;	/* array for GETALL & SETALL */
-	struct seminfo __user *__buf;	/* buffer for IPC_INFO */
-	void __user *__pad;
-};
-
-struct  seminfo {
-	int semmap;
-	int semmni;
-	int semmns;
-	int semmnu;
-	int semmsl;
-	int semopm;
-	int semume;
-	int semusz;
-	int semvmx;
-	int semaem;
-};
-
-#define SEMMNI  128             /* <= IPCMNI  max # of semaphore identifiers */
-#define SEMMSL  250             /* <= 8 000 max num of semaphores per id */
-#define SEMMNS  (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */
-#define SEMOPM  32	        /* <= 1 000 max num of ops per semop call */
-#define SEMVMX  32767           /* <= 32767 semaphore maximum value */
-#define SEMAEM  SEMVMX          /* adjust on exit max value */
-
-/* unused */
-#define SEMUME  SEMOPM          /* max num of undo entries per process */
-#define SEMMNU  SEMMNS          /* num of undo structures system wide */
-#define SEMMAP  SEMMNS          /* # of entries in semaphore map */
-#define SEMUSZ  20		/* sizeof struct sem_undo */
-
-#ifdef __KERNEL__
 #include <linux/atomic.h>
 #include <linux/rcupdate.h>
 #include <linux/cache.h>
+#include <uapi/linux/sem.h>
 
 struct task_struct;
 
@@ -122,6 +47,4 @@
 }
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SEM_H */
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 861e51d..0916107 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -6,16 +6,11 @@
  * Redistribution of this file is permitted under the terms of the GNU 
  * Public License (GPL)
  */
-
 #ifndef _LINUX_SERIAL_H
 #define _LINUX_SERIAL_H
 
-#include <linux/types.h>
-
-#include <linux/tty_flags.h>
-
-#ifdef __KERNEL__
 #include <asm/page.h>
+#include <uapi/linux/serial.h>
 
 
 /*
@@ -33,118 +28,6 @@
  */
 #define SERIAL_XMIT_SIZE PAGE_SIZE
 
-#endif
-
-struct serial_struct {
-	int	type;
-	int	line;
-	unsigned int	port;
-	int	irq;
-	int	flags;
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	baud_base;
-	unsigned short	close_delay;
-	char	io_type;
-	char	reserved_char[1];
-	int	hub6;
-	unsigned short	closing_wait; /* time to wait before closing */
-	unsigned short	closing_wait2; /* no longer used... */
-	unsigned char	*iomem_base;
-	unsigned short	iomem_reg_shift;
-	unsigned int	port_high;
-	unsigned long	iomap_base;	/* cookie passed into ioremap */
-};
-
-/*
- * For the close wait times, 0 means wait forever for serial port to
- * flush its output.  65535 means don't wait at all.
- */
-#define ASYNC_CLOSING_WAIT_INF	0
-#define ASYNC_CLOSING_WAIT_NONE	65535
-
-/*
- * These are the supported serial types.
- */
-#define PORT_UNKNOWN	0
-#define PORT_8250	1
-#define PORT_16450	2
-#define PORT_16550	3
-#define PORT_16550A	4
-#define PORT_CIRRUS     5	/* usurped by cyclades.c */
-#define PORT_16650	6
-#define PORT_16650V2	7
-#define PORT_16750	8
-#define PORT_STARTECH	9	/* usurped by cyclades.c */
-#define PORT_16C950	10	/* Oxford Semiconductor */
-#define PORT_16654	11
-#define PORT_16850	12
-#define PORT_RSA	13	/* RSA-DV II/S card */
-#define PORT_MAX	13
-
-#define SERIAL_IO_PORT	0
-#define SERIAL_IO_HUB6	1
-#define SERIAL_IO_MEM	2
-
-#define UART_CLEAR_FIFO		0x01
-#define UART_USE_FIFO		0x02
-#define UART_STARTECH		0x04
-#define UART_NATSEMI		0x08
-
-
-/*
- * Multiport serial configuration structure --- external structure
- */
-struct serial_multiport_struct {
-	int		irq;
-	int		port1;
-	unsigned char	mask1, match1;
-	int		port2;
-	unsigned char	mask2, match2;
-	int		port3;
-	unsigned char	mask3, match3;
-	int		port4;
-	unsigned char	mask4, match4;
-	int		port_monitor;
-	int	reserved[32];
-};
-
-/*
- * Serial input interrupt line counters -- external structure
- * Four lines can interrupt: CTS, DSR, RI, DCD
- */
-struct serial_icounter_struct {
-	int cts, dsr, rng, dcd;
-	int rx, tx;
-	int frame, overrun, parity, brk;
-	int buf_overrun;
-	int reserved[9];
-};
-
-/*
- * Serial interface for controlling RS485 settings on chips with suitable
- * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
- * platform. The set function returns the new state, with any unsupported bits
- * reverted appropriately.
- */
-
-struct serial_rs485 {
-	__u32	flags;			/* RS485 feature flags */
-#define SER_RS485_ENABLED		(1 << 0)	/* If enabled */
-#define SER_RS485_RTS_ON_SEND		(1 << 1)	/* Logical level for
-							   RTS pin when
-							   sending */
-#define SER_RS485_RTS_AFTER_SEND	(1 << 2)	/* Logical level for
-							   RTS pin after sent*/
-#define SER_RS485_RX_DURING_TX		(1 << 4)
-	__u32	delay_rts_before_send;	/* Delay before send (milliseconds) */
-	__u32	delay_rts_after_send;	/* Delay after send (milliseconds) */
-	__u32	padding[5];		/* Memory is cheap, new structs
-					   are a royal PITA .. */
-};
-
-#ifdef __KERNEL__
 #include <linux/compiler.h>
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_SERIAL_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f9b22ec..3c43022 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -20,202 +20,6 @@
 #ifndef LINUX_SERIAL_CORE_H
 #define LINUX_SERIAL_CORE_H
 
-#include <linux/serial.h>
-
-/*
- * The type definitions.  These are from Ted Ts'o's serial.h
- */
-#define PORT_UNKNOWN	0
-#define PORT_8250	1
-#define PORT_16450	2
-#define PORT_16550	3
-#define PORT_16550A	4
-#define PORT_CIRRUS	5
-#define PORT_16650	6
-#define PORT_16650V2	7
-#define PORT_16750	8
-#define PORT_STARTECH	9
-#define PORT_16C950	10
-#define PORT_16654	11
-#define PORT_16850	12
-#define PORT_RSA	13
-#define PORT_NS16550A	14
-#define PORT_XSCALE	15
-#define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
-#define PORT_OCTEON	17	/* Cavium OCTEON internal UART */
-#define PORT_AR7	18	/* Texas Instruments AR7 internal UART */
-#define PORT_U6_16550A	19	/* ST-Ericsson U6xxx internal UART */
-#define PORT_TEGRA	20	/* NVIDIA Tegra internal UART */
-#define PORT_XR17D15X	21	/* Exar XR17D15x UART */
-#define PORT_LPC3220	22	/* NXP LPC32xx SoC "Standard" UART */
-#define PORT_8250_CIR	23	/* CIR infrared port, has its own driver */
-#define PORT_MAX_8250	23	/* max port ID */
-
-/*
- * ARM specific type numbers.  These are not currently guaranteed
- * to be implemented, and will change in the future.  These are
- * separate so any additions to the old serial.c that occur before
- * we are merged can be easily merged here.
- */
-#define PORT_PXA	31
-#define PORT_AMBA	32
-#define PORT_CLPS711X	33
-#define PORT_SA1100	34
-#define PORT_UART00	35
-#define PORT_21285	37
-
-/* Sparc type numbers.  */
-#define PORT_SUNZILOG	38
-#define PORT_SUNSAB	39
-
-/* DEC */
-#define PORT_DZ		46
-#define PORT_ZS		47
-
-/* Parisc type numbers. */
-#define PORT_MUX	48
-
-/* Atmel AT91 / AT32 SoC */
-#define PORT_ATMEL	49
-
-/* Macintosh Zilog type numbers */
-#define PORT_MAC_ZILOG	50	/* m68k : not yet implemented */
-#define PORT_PMAC_ZILOG	51
-
-/* SH-SCI */
-#define PORT_SCI	52
-#define PORT_SCIF	53
-#define PORT_IRDA	54
-
-/* Samsung S3C2410 SoC and derivatives thereof */
-#define PORT_S3C2410    55
-
-/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
-#define PORT_IP22ZILOG	56
-
-/* Sharp LH7a40x -- an ARM9 SoC series */
-#define PORT_LH7A40X	57
-
-/* PPC CPM type number */
-#define PORT_CPM        58
-
-/* MPC52xx (and MPC512x) type numbers */
-#define PORT_MPC52xx	59
-
-/* IBM icom */
-#define PORT_ICOM	60
-
-/* Samsung S3C2440 SoC */
-#define PORT_S3C2440	61
-
-/* Motorola i.MX SoC */
-#define PORT_IMX	62
-
-/* Marvell MPSC */
-#define PORT_MPSC	63
-
-/* TXX9 type number */
-#define PORT_TXX9	64
-
-/* NEC VR4100 series SIU/DSIU */
-#define PORT_VR41XX_SIU		65
-#define PORT_VR41XX_DSIU	66
-
-/* Samsung S3C2400 SoC */
-#define PORT_S3C2400	67
-
-/* M32R SIO */
-#define PORT_M32R_SIO	68
-
-/*Digi jsm */
-#define PORT_JSM        69
-
-#define PORT_PNX8XXX	70
-
-/* Hilscher netx */
-#define PORT_NETX	71
-
-/* SUN4V Hypervisor Console */
-#define PORT_SUNHV	72
-
-#define PORT_S3C2412	73
-
-/* Xilinx uartlite */
-#define PORT_UARTLITE	74
-
-/* Blackfin bf5xx */
-#define PORT_BFIN	75
-
-/* Micrel KS8695 */
-#define PORT_KS8695	76
-
-/* Broadcom SB1250, etc. SOC */
-#define PORT_SB1250_DUART	77
-
-/* Freescale ColdFire */
-#define PORT_MCF	78
-
-/* Blackfin SPORT */
-#define PORT_BFIN_SPORT		79
-
-/* MN10300 on-chip UART numbers */
-#define PORT_MN10300		80
-#define PORT_MN10300_CTS	81
-
-#define PORT_SC26XX	82
-
-/* SH-SCI */
-#define PORT_SCIFA	83
-
-#define PORT_S3C6400	84
-
-/* NWPSERIAL */
-#define PORT_NWPSERIAL	85
-
-/* MAX3100 */
-#define PORT_MAX3100    86
-
-/* Timberdale UART */
-#define PORT_TIMBUART	87
-
-/* Qualcomm MSM SoCs */
-#define PORT_MSM	88
-
-/* BCM63xx family SoCs */
-#define PORT_BCM63XX	89
-
-/* Aeroflex Gaisler GRLIB APBUART */
-#define PORT_APBUART    90
-
-/* Altera UARTs */
-#define PORT_ALTERA_JTAGUART	91
-#define PORT_ALTERA_UART	92
-
-/* SH-SCI */
-#define PORT_SCIFB	93
-
-/* MAX310X */
-#define PORT_MAX310X	94
-
-/* High Speed UART for Medfield */
-#define PORT_MFD	95
-
-/* TI OMAP-UART */
-#define PORT_OMAP	96
-
-/* VIA VT8500 SoC */
-#define PORT_VT8500	97
-
-/* Xilinx PSS UART */
-#define PORT_XUARTPS	98
-
-/* Atheros AR933X SoC */
-#define PORT_AR933X	99
-
-/* Energy Micro efm32 SoC */
-#define PORT_EFMUART   100
-
-#ifdef __KERNEL__
 
 #include <linux/compiler.h>
 #include <linux/interrupt.h>
@@ -226,6 +30,7 @@
 #include <linux/mutex.h>
 #include <linux/sysrq.h>
 #include <linux/pps_kernel.h>
+#include <uapi/linux/serial_core.h>
 
 struct uart_port;
 struct serial_struct;
@@ -562,6 +367,4 @@
 					 (cflag) & CRTSCTS || \
 					 !((cflag) & CLOCAL))
 
-#endif
-
 #endif /* LINUX_SERIAL_CORE_H */
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 6d6cfd3..36aac73 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -1,6 +1,3 @@
-#ifndef _SERIO_H
-#define _SERIO_H
-
 /*
  * Copyright (C) 1999-2002 Vojtech Pavlik
 *
@@ -8,12 +5,9 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
+#ifndef _SERIO_H
+#define _SERIO_H
 
-#include <linux/ioctl.h>
-
-#define SPIOCSTYPE	_IOW('q', 0x01, unsigned long)
-
-#ifdef __KERNEL__
 
 #include <linux/types.h>
 #include <linux/interrupt.h>
@@ -22,6 +16,7 @@
 #include <linux/mutex.h>
 #include <linux/device.h>
 #include <linux/mod_devicetable.h>
+#include <uapi/linux/serio.h>
 
 struct serio {
 	void *port_data;
@@ -152,68 +147,3 @@
 }
 
 #endif
-
-/*
- * bit masks for use in "interrupt" flags (3rd argument)
- */
-#define SERIO_TIMEOUT	1
-#define SERIO_PARITY	2
-#define SERIO_FRAME	4
-
-/*
- * Serio types
- */
-#define SERIO_XT	0x00
-#define SERIO_8042	0x01
-#define SERIO_RS232	0x02
-#define SERIO_HIL_MLC	0x03
-#define SERIO_PS_PSTHRU	0x05
-#define SERIO_8042_XL	0x06
-
-/*
- * Serio protocols
- */
-#define SERIO_UNKNOWN	0x00
-#define SERIO_MSC	0x01
-#define SERIO_SUN	0x02
-#define SERIO_MS	0x03
-#define SERIO_MP	0x04
-#define SERIO_MZ	0x05
-#define SERIO_MZP	0x06
-#define SERIO_MZPP	0x07
-#define SERIO_VSXXXAA	0x08
-#define SERIO_SUNKBD	0x10
-#define SERIO_WARRIOR	0x18
-#define SERIO_SPACEORB	0x19
-#define SERIO_MAGELLAN	0x1a
-#define SERIO_SPACEBALL	0x1b
-#define SERIO_GUNZE	0x1c
-#define SERIO_IFORCE	0x1d
-#define SERIO_STINGER	0x1e
-#define SERIO_NEWTON	0x1f
-#define SERIO_STOWAWAY	0x20
-#define SERIO_H3600	0x21
-#define SERIO_PS2SER	0x22
-#define SERIO_TWIDKBD	0x23
-#define SERIO_TWIDJOY	0x24
-#define SERIO_HIL	0x25
-#define SERIO_SNES232	0x26
-#define SERIO_SEMTECH	0x27
-#define SERIO_LKKBD	0x28
-#define SERIO_ELO	0x29
-#define SERIO_MICROTOUCH	0x30
-#define SERIO_PENMOUNT	0x31
-#define SERIO_TOUCHRIGHT	0x32
-#define SERIO_TOUCHWIN	0x33
-#define SERIO_TAOSEVM	0x34
-#define SERIO_FUJITSU	0x35
-#define SERIO_ZHENHUA	0x36
-#define SERIO_INEXIO	0x37
-#define SERIO_TOUCHIT213	0x38
-#define SERIO_W8001	0x39
-#define SERIO_DYNAPRO	0x3a
-#define SERIO_HAMPSHIRE	0x3b
-#define SERIO_PS2MULT	0x3c
-#define SERIO_TSC40	0x3d
-
-#endif
diff --git a/include/linux/shm.h b/include/linux/shm.h
index edd0868..bcf8a6a 100644
--- a/include/linux/shm.h
+++ b/include/linux/shm.h
@@ -1,88 +1,11 @@
 #ifndef _LINUX_SHM_H_
 #define _LINUX_SHM_H_
 
-#include <linux/ipc.h>
-#include <linux/errno.h>
-#ifdef __KERNEL__
 #include <asm/page.h>
-#else
-#include <unistd.h>
-#endif
+#include <uapi/linux/shm.h>
 
-/*
- * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can
- * be increased by sysctl
- */
-
-#define SHMMAX 0x2000000		 /* max shared seg size (bytes) */
-#define SHMMIN 1			 /* min shared seg size (bytes) */
-#define SHMMNI 4096			 /* max num of segs system wide */
-#ifdef __KERNEL__
 #define SHMALL (SHMMAX/PAGE_SIZE*(SHMMNI/16)) /* max shm system wide (pages) */
-#else
-#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16))
-#endif
-#define SHMSEG SHMMNI			 /* max shared segs per process */
-
-#ifdef __KERNEL__
 #include <asm/shmparam.h>
-#endif
-
-/* Obsolete, used only for backwards compatibility and libc5 compiles */
-struct shmid_ds {
-	struct ipc_perm		shm_perm;	/* operation perms */
-	int			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	__kernel_time_t		shm_ctime;	/* last change time */
-	__kernel_ipc_pid_t	shm_cpid;	/* pid of creator */
-	__kernel_ipc_pid_t	shm_lpid;	/* pid of last operator */
-	unsigned short		shm_nattch;	/* no. of current attaches */
-	unsigned short 		shm_unused;	/* compatibility */
-	void 			*shm_unused2;	/* ditto - used by DIPC */
-	void			*shm_unused3;	/* unused */
-};
-
-/* Include the definition of shmid64_ds and shminfo64 */
-#include <asm/shmbuf.h>
-
-/* permission flag for shmget */
-#define SHM_R		0400	/* or S_IRUGO from <linux/stat.h> */
-#define SHM_W		0200	/* or S_IWUGO from <linux/stat.h> */
-
-/* mode for attach */
-#define	SHM_RDONLY	010000	/* read-only access */
-#define	SHM_RND		020000	/* round attach address to SHMLBA boundary */
-#define	SHM_REMAP	040000	/* take-over region on attach */
-#define	SHM_EXEC	0100000	/* execution access */
-
-/* super user shmctl commands */
-#define SHM_LOCK 	11
-#define SHM_UNLOCK 	12
-
-/* ipcs ctl commands */
-#define SHM_STAT 	13
-#define SHM_INFO 	14
-
-/* Obsolete, used only for backwards compatibility */
-struct	shminfo {
-	int shmmax;
-	int shmmin;
-	int shmmni;
-	int shmseg;
-	int shmall;
-};
-
-struct shm_info {
-	int used_ids;
-	unsigned long shm_tot;	/* total allocated shm */
-	unsigned long shm_rss;	/* total resident shm */
-	unsigned long shm_swp;	/* total swapped shm */
-	unsigned long swap_attempts;
-	unsigned long swap_successes;
-};
-
-#ifdef __KERNEL__
 struct shmid_kernel /* private to the kernel */
 {	
 	struct kern_ipc_perm	shm_perm;
@@ -127,6 +50,4 @@
 }
 #endif
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SHM_H_ */
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 26b424a..e19a011 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -1,11 +1,8 @@
 #ifndef _LINUX_SIGNAL_H
 #define _LINUX_SIGNAL_H
 
-#include <asm/signal.h>
-#include <asm/siginfo.h>
-
-#ifdef __KERNEL__
 #include <linux/list.h>
+#include <uapi/linux/signal.h>
 
 struct task_struct;
 
@@ -388,6 +385,4 @@
 
 void signals_init(void);
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SIGNAL_H */
diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h
index 247399b..eadbe22 100644
--- a/include/linux/signalfd.h
+++ b/include/linux/signalfd.h
@@ -4,51 +4,11 @@
  *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
  *
  */
-
 #ifndef _LINUX_SIGNALFD_H
 #define _LINUX_SIGNALFD_H
 
-#include <linux/types.h>
-/* For O_CLOEXEC and O_NONBLOCK */
-#include <linux/fcntl.h>
+#include <uapi/linux/signalfd.h>
 
-/* Flags for signalfd4.  */
-#define SFD_CLOEXEC O_CLOEXEC
-#define SFD_NONBLOCK O_NONBLOCK
-
-struct signalfd_siginfo {
-	__u32 ssi_signo;
-	__s32 ssi_errno;
-	__s32 ssi_code;
-	__u32 ssi_pid;
-	__u32 ssi_uid;
-	__s32 ssi_fd;
-	__u32 ssi_tid;
-	__u32 ssi_band;
-	__u32 ssi_overrun;
-	__u32 ssi_trapno;
-	__s32 ssi_status;
-	__s32 ssi_int;
-	__u64 ssi_ptr;
-	__u64 ssi_utime;
-	__u64 ssi_stime;
-	__u64 ssi_addr;
-	__u16 ssi_addr_lsb;
-
-	/*
-	 * Pad strcture to 128 bytes. Remember to update the
-	 * pad size when you add new members. We use a fixed
-	 * size structure to avoid compatibility problems with
-	 * future versions, and we leave extra space for additional
-	 * members. We use fixed size members because this strcture
-	 * comes out of a read(2) and we really don't want to have
-	 * a compat on read(2).
-	 */
-	__u8 __pad[46];
-};
-
-
-#ifdef __KERNEL__
 
 #ifdef CONFIG_SIGNALFD
 
@@ -71,6 +31,4 @@
 
 #endif /* CONFIG_SIGNALFD */
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SIGNALFD_H */
diff --git a/include/linux/sock_diag.h b/include/linux/sock_diag.h
index e3e395a..e8d702e 100644
--- a/include/linux/sock_diag.h
+++ b/include/linux/sock_diag.h
@@ -1,29 +1,8 @@
 #ifndef __SOCK_DIAG_H__
 #define __SOCK_DIAG_H__
 
-#include <linux/types.h>
+#include <uapi/linux/sock_diag.h>
 
-#define SOCK_DIAG_BY_FAMILY 20
-
-struct sock_diag_req {
-	__u8	sdiag_family;
-	__u8	sdiag_protocol;
-};
-
-enum {
-	SK_MEMINFO_RMEM_ALLOC,
-	SK_MEMINFO_RCVBUF,
-	SK_MEMINFO_WMEM_ALLOC,
-	SK_MEMINFO_SNDBUF,
-	SK_MEMINFO_FWD_ALLOC,
-	SK_MEMINFO_WMEM_QUEUED,
-	SK_MEMINFO_OPTMEM,
-	SK_MEMINFO_BACKLOG,
-
-	SK_MEMINFO_VARS,
-};
-
-#ifdef __KERNEL__
 struct sk_buff;
 struct nlmsghdr;
 struct sock;
@@ -44,5 +23,4 @@
 
 int sock_diag_put_meminfo(struct sock *sk, struct sk_buff *skb, int attr);
 
-#endif /* KERNEL */
 #endif
diff --git a/include/linux/socket.h b/include/linux/socket.h
index ba7b2e8..9a546ff 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -1,30 +1,13 @@
 #ifndef _LINUX_SOCKET_H
 #define _LINUX_SOCKET_H
 
-/*
- * Desired design of maximum size and alignment (see RFC2553)
- */
-#define _K_SS_MAXSIZE	128	/* Implementation specific max size */
-#define _K_SS_ALIGNSIZE	(__alignof__ (struct sockaddr *))
-				/* Implementation specific desired alignment */
-
-typedef unsigned short __kernel_sa_family_t;
-
-struct __kernel_sockaddr_storage {
-	__kernel_sa_family_t	ss_family;		/* address family */
-	/* Following field(s) are implementation specific */
-	char		__data[_K_SS_MAXSIZE - sizeof(unsigned short)];
-				/* space to achieve desired size, */
-				/* _SS_MAXSIZE value minus size of ss_family */
-} __attribute__ ((aligned(_K_SS_ALIGNSIZE)));	/* force desired alignment */
-
-#ifdef __KERNEL__
 
 #include <asm/socket.h>			/* arch-dependent defines	*/
 #include <linux/sockios.h>		/* the SIOCxxx I/O controls	*/
 #include <linux/uio.h>			/* iovec support		*/
 #include <linux/types.h>		/* pid_t			*/
 #include <linux/compiler.h>		/* __user			*/
+#include <uapi/linux/socket.h>
 
 struct pid;
 struct cred;
@@ -340,5 +323,4 @@
 			  unsigned int flags, struct timespec *timeout);
 extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,
 			  unsigned int vlen, unsigned int flags);
-#endif /* not kernel and not glibc */
 #endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/sonet.h b/include/linux/sonet.h
index de8832d..680f9a3 100644
--- a/include/linux/sonet.h
+++ b/include/linux/sonet.h
@@ -1,64 +1,10 @@
 /* sonet.h - SONET/SHD physical layer control */
- 
-/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
- 
-
 #ifndef LINUX_SONET_H
 #define LINUX_SONET_H
 
-#define __SONET_ITEMS \
-    __HANDLE_ITEM(section_bip); 	/* section parity errors (B1) */ \
-    __HANDLE_ITEM(line_bip);		/* line parity errors (B2) */ \
-    __HANDLE_ITEM(path_bip);		/* path parity errors (B3) */ \
-    __HANDLE_ITEM(line_febe);		/* line parity errors at remote */ \
-    __HANDLE_ITEM(path_febe);		/* path parity errors at remote */ \
-    __HANDLE_ITEM(corr_hcs);		/* correctable header errors */ \
-    __HANDLE_ITEM(uncorr_hcs);		/* uncorrectable header errors */ \
-    __HANDLE_ITEM(tx_cells);		/* cells sent */ \
-    __HANDLE_ITEM(rx_cells);		/* cells received */
-
-struct sonet_stats {
-#define __HANDLE_ITEM(i) int i
-	__SONET_ITEMS
-#undef __HANDLE_ITEM
-} __attribute__ ((packed));
-
-
-#define SONET_GETSTAT	_IOR('a',ATMIOC_PHYTYP,struct sonet_stats)
-					/* get statistics */
-#define SONET_GETSTATZ	_IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats)
-					/* ... and zero counters */
-#define SONET_SETDIAG	_IOWR('a',ATMIOC_PHYTYP+2,int)
-					/* set error insertion */
-#define SONET_CLRDIAG	_IOWR('a',ATMIOC_PHYTYP+3,int)
-					/* clear error insertion */
-#define SONET_GETDIAG	_IOR('a',ATMIOC_PHYTYP+4,int)
-					/* query error insertion */
-#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int)
-					/* set framing mode (SONET/SDH) */
-#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
-					/* get framing mode */
-#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \
-  unsigned char[SONET_FRSENSE_SIZE])	/* get framing sense information */
-
-#define SONET_INS_SBIP	  1		/* section BIP */
-#define SONET_INS_LBIP	  2		/* line BIP */
-#define SONET_INS_PBIP	  4		/* path BIP */
-#define SONET_INS_FRAME	  8		/* out of frame */
-#define SONET_INS_LOS	 16		/* set line to zero */
-#define SONET_INS_LAIS	 32		/* line alarm indication signal */
-#define SONET_INS_PAIS	 64		/* path alarm indication signal */
-#define SONET_INS_HCS	128		/* insert HCS error */
-
-#define SONET_FRAME_SONET 0		/* SONET STS-3 framing */
-#define SONET_FRAME_SDH   1		/* SDH STM-1 framing */
-
-#define SONET_FRSENSE_SIZE 6		/* C1[3],H1[3] (0xff for unknown) */
-
-
-#ifdef __KERNEL__
 
 #include <linux/atomic.h>
+#include <uapi/linux/sonet.h>
 
 struct k_sonet_stats {
 #define __HANDLE_ITEM(i) atomic_t i
@@ -71,5 +17,3 @@
     struct sonet_stats *to);
 
 #endif
-
-#endif
diff --git a/include/linux/sonypi.h b/include/linux/sonypi.h
index c0f87da..0b7cc26 100644
--- a/include/linux/sonypi.h
+++ b/include/linux/sonypi.h
@@ -32,117 +32,11 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
-
 #ifndef _SONYPI_H_
 #define _SONYPI_H_
 
-#include <linux/types.h>
+#include <uapi/linux/sonypi.h>
 
-/* events the user application reading /dev/sonypi can use */
-
-#define SONYPI_EVENT_IGNORE			 0
-#define SONYPI_EVENT_JOGDIAL_DOWN		 1
-#define SONYPI_EVENT_JOGDIAL_UP			 2
-#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED	 3
-#define SONYPI_EVENT_JOGDIAL_UP_PRESSED		 4
-#define SONYPI_EVENT_JOGDIAL_PRESSED		 5
-#define SONYPI_EVENT_JOGDIAL_RELEASED		 6	/* obsolete */
-#define SONYPI_EVENT_CAPTURE_PRESSED		 7
-#define SONYPI_EVENT_CAPTURE_RELEASED		 8	/* obsolete */
-#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED	 9
-#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED	10
-#define SONYPI_EVENT_FNKEY_ESC			11
-#define SONYPI_EVENT_FNKEY_F1			12
-#define SONYPI_EVENT_FNKEY_F2			13
-#define SONYPI_EVENT_FNKEY_F3			14
-#define SONYPI_EVENT_FNKEY_F4			15
-#define SONYPI_EVENT_FNKEY_F5			16
-#define SONYPI_EVENT_FNKEY_F6			17
-#define SONYPI_EVENT_FNKEY_F7			18
-#define SONYPI_EVENT_FNKEY_F8			19
-#define SONYPI_EVENT_FNKEY_F9			20
-#define SONYPI_EVENT_FNKEY_F10			21
-#define SONYPI_EVENT_FNKEY_F11			22
-#define SONYPI_EVENT_FNKEY_F12			23
-#define SONYPI_EVENT_FNKEY_1			24
-#define SONYPI_EVENT_FNKEY_2			25
-#define SONYPI_EVENT_FNKEY_D			26
-#define SONYPI_EVENT_FNKEY_E			27
-#define SONYPI_EVENT_FNKEY_F			28
-#define SONYPI_EVENT_FNKEY_S			29
-#define SONYPI_EVENT_FNKEY_B			30
-#define SONYPI_EVENT_BLUETOOTH_PRESSED		31
-#define SONYPI_EVENT_PKEY_P1			32
-#define SONYPI_EVENT_PKEY_P2			33
-#define SONYPI_EVENT_PKEY_P3			34
-#define SONYPI_EVENT_BACK_PRESSED		35
-#define SONYPI_EVENT_LID_CLOSED			36
-#define SONYPI_EVENT_LID_OPENED			37
-#define SONYPI_EVENT_BLUETOOTH_ON		38
-#define SONYPI_EVENT_BLUETOOTH_OFF		39
-#define SONYPI_EVENT_HELP_PRESSED		40
-#define SONYPI_EVENT_FNKEY_ONLY			41
-#define SONYPI_EVENT_JOGDIAL_FAST_DOWN		42
-#define SONYPI_EVENT_JOGDIAL_FAST_UP		43
-#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED	44
-#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED	45
-#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN		46
-#define SONYPI_EVENT_JOGDIAL_VFAST_UP		47
-#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED	48
-#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED	49
-#define SONYPI_EVENT_ZOOM_PRESSED		50
-#define SONYPI_EVENT_THUMBPHRASE_PRESSED	51
-#define SONYPI_EVENT_MEYE_FACE			52
-#define SONYPI_EVENT_MEYE_OPPOSITE		53
-#define SONYPI_EVENT_MEMORYSTICK_INSERT		54
-#define SONYPI_EVENT_MEMORYSTICK_EJECT		55
-#define SONYPI_EVENT_ANYBUTTON_RELEASED		56
-#define SONYPI_EVENT_BATTERY_INSERT		57
-#define SONYPI_EVENT_BATTERY_REMOVE		58
-#define SONYPI_EVENT_FNKEY_RELEASED		59
-#define SONYPI_EVENT_WIRELESS_ON		60
-#define SONYPI_EVENT_WIRELESS_OFF		61
-#define SONYPI_EVENT_ZOOM_IN_PRESSED		62
-#define SONYPI_EVENT_ZOOM_OUT_PRESSED		63
-#define SONYPI_EVENT_CD_EJECT_PRESSED		64
-#define SONYPI_EVENT_MODEKEY_PRESSED		65
-#define SONYPI_EVENT_PKEY_P4			66
-#define SONYPI_EVENT_PKEY_P5			67
-#define SONYPI_EVENT_SETTINGKEY_PRESSED		68
-#define SONYPI_EVENT_VOLUME_INC_PRESSED		69
-#define SONYPI_EVENT_VOLUME_DEC_PRESSED		70
-#define SONYPI_EVENT_BRIGHTNESS_PRESSED		71
-#define SONYPI_EVENT_MEDIA_PRESSED		72
-#define SONYPI_EVENT_VENDOR_PRESSED		73
-
-/* get/set brightness */
-#define SONYPI_IOCGBRT		_IOR('v', 0, __u8)
-#define SONYPI_IOCSBRT		_IOW('v', 0, __u8)
-
-/* get battery full capacity/remaining capacity */
-#define SONYPI_IOCGBAT1CAP	_IOR('v', 2, __u16)
-#define SONYPI_IOCGBAT1REM	_IOR('v', 3, __u16)
-#define SONYPI_IOCGBAT2CAP	_IOR('v', 4, __u16)
-#define SONYPI_IOCGBAT2REM	_IOR('v', 5, __u16)
-
-/* get battery flags: battery1/battery2/ac adapter present */
-#define SONYPI_BFLAGS_B1	0x01
-#define SONYPI_BFLAGS_B2	0x02
-#define SONYPI_BFLAGS_AC	0x04
-#define SONYPI_IOCGBATFLAGS	_IOR('v', 7, __u8)
-
-/* get/set bluetooth subsystem state on/off */
-#define SONYPI_IOCGBLUE		_IOR('v', 8, __u8)
-#define SONYPI_IOCSBLUE		_IOW('v', 9, __u8)
-
-/* get/set fan state on/off */
-#define SONYPI_IOCGFAN		_IOR('v', 10, __u8)
-#define SONYPI_IOCSFAN		_IOW('v', 11, __u8)
-
-/* get temperature (C) */
-#define SONYPI_IOCGTEMP		_IOR('v', 12, __u8)
-
-#ifdef __KERNEL__
 
 /* used only for communication between v4l and sonypi */
 
@@ -166,6 +60,4 @@
 #define SONYPI_COMMAND_GETCAMERAROMVERSION	18	/* obsolete */
 #define SONYPI_COMMAND_GETCAMERAREVISION	19	/* obsolete */
 
-#endif				/* __KERNEL__ */
-
 #endif				/* _SONYPI_H_ */
diff --git a/include/linux/sound.h b/include/linux/sound.h
index fae20ba..73ded04 100644
--- a/include/linux/sound.h
+++ b/include/linux/sound.h
@@ -1,33 +1,8 @@
 #ifndef _LINUX_SOUND_H
 #define _LINUX_SOUND_H
 
-/*
- * Minor numbers for the sound driver.
- */
+#include <uapi/linux/sound.h>
 
-#include <linux/fs.h>
-
-#define SND_DEV_CTL		0	/* Control port /dev/mixer */
-#define SND_DEV_SEQ		1	/* Sequencer output /dev/sequencer (FM
-						synthesizer and MIDI output) */
-#define SND_DEV_MIDIN		2	/* Raw midi access */
-#define SND_DEV_DSP		3	/* Digitized voice /dev/dsp */
-#define SND_DEV_AUDIO		4	/* Sparc compatible /dev/audio */
-#define SND_DEV_DSP16		5	/* Like /dev/dsp but 16 bits/sample */
-/* #define SND_DEV_STATUS	6 */	/* /dev/sndstat (obsolete) */
-#define SND_DEV_UNUSED		6
-#define SND_DEV_AWFM		7	/* Reserved */
-#define SND_DEV_SEQ2		8	/* /dev/sequencer, level 2 interface */
-/* #define SND_DEV_SNDPROC	9 */	/* /dev/sndproc for programmable devices (not used) */
-/* #define SND_DEV_DMMIDI	9 */
-#define SND_DEV_SYNTH		9	/* Raw synth access /dev/synth (same as /dev/dmfm) */
-#define SND_DEV_DMFM		10	/* Raw synth access /dev/dmfm */
-#define SND_DEV_UNKNOWN11	11
-#define SND_DEV_ADSP		12	/* Like /dev/dsp (obsolete) */
-#define SND_DEV_AMIDI		13	/* Like /dev/midi (obsolete) */
-#define SND_DEV_ADMMIDI		14	/* Like /dev/dmmidi (onsolete) */
-
-#ifdef __KERNEL__
 /*
  *	Sound core interface functions
  */
@@ -43,6 +18,4 @@
 extern void unregister_sound_mixer(int unit);
 extern void unregister_sound_midi(int unit);
 extern void unregister_sound_dsp(int unit);
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SOUND_H */
diff --git a/include/linux/soundcard.h b/include/linux/soundcard.h
index dfcf86f..96c79cb 100644
--- a/include/linux/soundcard.h
+++ b/include/linux/soundcard.h
@@ -1,5 +1,3 @@
-#ifndef SOUNDCARD_H
-#define SOUNDCARD_H
 /*
  * Copyright by Hannu Savolainen 1993-1997
  *
@@ -23,174 +21,12 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  */
+#ifndef SOUNDCARD_H
+#define SOUNDCARD_H
 
-
-/*
- * OSS interface version. With versions earlier than 3.6 this value is
- * an integer with value less than 361. In versions 3.6 and later
- * it's a six digit hexadecimal value. For example value
- * of 0x030600 represents OSS version 3.6.0.
- * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of
- * the currently active driver.
- */
-#define SOUND_VERSION	0x030802
-#define OPEN_SOUND_SYSTEM
-
-/* In Linux we need to be prepared for cross compiling */
-#include <linux/ioctl.h>
-
-/* Endian macros. */
-#ifdef __KERNEL__
 #  include <asm/byteorder.h>
-#else
-#  include <endian.h>
-#endif
+#include <uapi/linux/soundcard.h>
 
-/*
- *	Supported card ID numbers (Should be somewhere else?)
- */
-
-#define SNDCARD_ADLIB		1
-#define SNDCARD_SB		2
-#define SNDCARD_PAS		3
-#define SNDCARD_GUS		4
-#define SNDCARD_MPU401		5
-#define SNDCARD_SB16		6
-#define SNDCARD_SB16MIDI	7
-#define SNDCARD_UART6850	8
-#define SNDCARD_GUS16		9
-#define SNDCARD_MSS		10
-#define SNDCARD_PSS     	11
-#define SNDCARD_SSCAPE		12
-#define SNDCARD_PSS_MPU     	13
-#define SNDCARD_PSS_MSS     	14
-#define SNDCARD_SSCAPE_MSS	15
-#define SNDCARD_TRXPRO		16
-#define SNDCARD_TRXPRO_SB	17
-#define SNDCARD_TRXPRO_MPU	18
-#define SNDCARD_MAD16		19
-#define SNDCARD_MAD16_MPU	20
-#define SNDCARD_CS4232		21
-#define SNDCARD_CS4232_MPU	22
-#define SNDCARD_MAUI		23
-#define SNDCARD_PSEUDO_MSS	24
-#define SNDCARD_GUSPNP		25
-#define SNDCARD_UART401		26
-/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */
-
-/***********************************
- * IOCTL Commands for /dev/sequencer
- */
-
-#ifndef _SIOWR
-#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__)))
-/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */
-#define	SIOCPARM_MASK	IOCPARM_MASK
-#define	SIOC_VOID	IOC_VOID
-#define	SIOC_OUT	IOC_OUT
-#define	SIOC_IN		IOC_IN
-#define	SIOC_INOUT	IOC_INOUT
-#define _SIOC_SIZE	_IOC_SIZE
-#define _SIOC_DIR	_IOC_DIR
-#define _SIOC_NONE	_IOC_NONE
-#define _SIOC_READ	_IOC_READ
-#define _SIOC_WRITE	_IOC_WRITE
-#define	_SIO		_IO
-#define	_SIOR		_IOR
-#define	_SIOW		_IOW
-#define	_SIOWR		_IOWR
-#else
-
-/* Ioctl's have the command encoded in the lower word,
- * and the size of any in or out parameters in the upper
- * word.  The high 2 bits of the upper word are used
- * to encode the in/out status of the parameter; for now
- * we restrict parameters to at most 8191 bytes.
- */
-/* #define	SIOCTYPE		(0xff<<8) */
-#define	SIOCPARM_MASK	0x1fff		/* parameters must be < 8192 bytes */
-#define	SIOC_VOID	0x00000000	/* no parameters */
-#define	SIOC_OUT	0x20000000	/* copy out parameters */
-#define	SIOC_IN		0x40000000	/* copy in parameters */
-#define	SIOC_INOUT	(SIOC_IN|SIOC_OUT)
-/* the 0x20000000 is so we can distinguish new ioctl's from old */
-#define	_SIO(x,y)	((int)(SIOC_VOID|(x<<8)|y))
-#define	_SIOR(x,y,t)	((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-#define	_SIOW(x,y,t)	((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-/* this should be _SIORW, but stdio got there first */
-#define	_SIOWR(x,y,t)	((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
-#define _SIOC_SIZE(x)	((x>>16)&SIOCPARM_MASK)	
-#define _SIOC_DIR(x)	(x & 0xf0000000)
-#define _SIOC_NONE	SIOC_VOID
-#define _SIOC_READ	SIOC_OUT
-#define _SIOC_WRITE	SIOC_IN
-#  endif /* _IOWR */
-#endif  /* !_SIOWR */
-
-#define SNDCTL_SEQ_RESET		_SIO  ('Q', 0)
-#define SNDCTL_SEQ_SYNC			_SIO  ('Q', 1)
-#define SNDCTL_SYNTH_INFO		_SIOWR('Q', 2, struct synth_info)
-#define SNDCTL_SEQ_CTRLRATE		_SIOWR('Q', 3, int)	/* Set/get timer resolution (HZ) */
-#define SNDCTL_SEQ_GETOUTCOUNT		_SIOR ('Q', 4, int)
-#define SNDCTL_SEQ_GETINCOUNT		_SIOR ('Q', 5, int)
-#define SNDCTL_SEQ_PERCMODE		_SIOW ('Q', 6, int)
-#define SNDCTL_FM_LOAD_INSTR		_SIOW ('Q', 7, struct sbi_instrument)	/* Obsolete. Don't use!!!!!! */
-#define SNDCTL_SEQ_TESTMIDI		_SIOW ('Q', 8, int)
-#define SNDCTL_SEQ_RESETSAMPLES		_SIOW ('Q', 9, int)
-#define SNDCTL_SEQ_NRSYNTHS		_SIOR ('Q',10, int)
-#define SNDCTL_SEQ_NRMIDIS		_SIOR ('Q',11, int)
-#define SNDCTL_MIDI_INFO		_SIOWR('Q',12, struct midi_info)
-#define SNDCTL_SEQ_THRESHOLD		_SIOW ('Q',13, int)
-#define SNDCTL_SYNTH_MEMAVL		_SIOWR('Q',14, int)	/* in=dev#, out=memsize */
-#define SNDCTL_FM_4OP_ENABLE		_SIOW ('Q',15, int)	/* in=dev# */
-#define SNDCTL_SEQ_PANIC		_SIO  ('Q',17)
-#define SNDCTL_SEQ_OUTOFBAND		_SIOW ('Q',18, struct seq_event_rec)
-#define SNDCTL_SEQ_GETTIME		_SIOR ('Q',19, int)
-#define SNDCTL_SYNTH_ID			_SIOWR('Q',20, struct synth_info)
-#define SNDCTL_SYNTH_CONTROL		_SIOWR('Q',21, struct synth_control)
-#define SNDCTL_SYNTH_REMOVESAMPLE	_SIOWR('Q',22, struct remove_sample)
-
-typedef struct synth_control
-{
-	int devno;	/* Synthesizer # */
-	char data[4000]; /* Device spesific command/data record */
-}synth_control;
-
-typedef struct remove_sample
-{
-	int devno;	/* Synthesizer # */
-	int bankno;	/* MIDI bank # (0=General MIDI) */
-	int instrno;	/* MIDI instrument number */
-} remove_sample;
-
-typedef struct seq_event_rec {
-		unsigned char arr[8];
-} seq_event_rec;
-
-#define SNDCTL_TMR_TIMEBASE		_SIOWR('T', 1, int)
-#define SNDCTL_TMR_START		_SIO  ('T', 2)
-#define SNDCTL_TMR_STOP			_SIO  ('T', 3)
-#define SNDCTL_TMR_CONTINUE		_SIO  ('T', 4)
-#define SNDCTL_TMR_TEMPO		_SIOWR('T', 5, int)
-#define SNDCTL_TMR_SOURCE		_SIOWR('T', 6, int)
-#	define TMR_INTERNAL		0x00000001
-#	define TMR_EXTERNAL		0x00000002
-#		define TMR_MODE_MIDI	0x00000010
-#		define TMR_MODE_FSK	0x00000020
-#		define TMR_MODE_CLS	0x00000040
-#		define TMR_MODE_SMPTE	0x00000080
-#define SNDCTL_TMR_METRONOME		_SIOW ('T', 7, int)
-#define SNDCTL_TMR_SELECT		_SIOW ('T', 8, int)
-
-/*
- * Some big endian/little endian handling macros
- */
-
-#define _LINUX_PATCHKEY_H_INDIRECT
-#include <linux/patchkey.h>
-#undef _LINUX_PATCHKEY_H_INDIRECT
-
-#if defined(__KERNEL__)
 #  if defined(__BIG_ENDIAN)
 #    define AFMT_S16_NE AFMT_S16_BE
 #  elif defined(__LITTLE_ENDIAN)
@@ -198,1095 +34,4 @@
 #  else
 #    error "could not determine byte order"
 #  endif
-#else
-# if defined(__BYTE_ORDER)
-#  if __BYTE_ORDER == __BIG_ENDIAN
-#    define AFMT_S16_NE AFMT_S16_BE
-#  elif __BYTE_ORDER == __LITTLE_ENDIAN
-#    define AFMT_S16_NE AFMT_S16_LE
-#  else
-#    error "could not determine byte order"
-#  endif
-# endif
-#endif
-
-/*
- *	Sample loading mechanism for internal synthesizers (/dev/sequencer)
- *	The following patch_info structure has been designed to support
- *	Gravis UltraSound. It tries to be universal format for uploading
- *	sample based patches but is probably too limited.
- *
- *      (PBD) As Hannu guessed, the GUS structure is too limited for 
- *      the WaveFront, but this is the right place for a constant definition.
- */
-
-struct patch_info {
-		unsigned short key;		/* Use WAVE_PATCH here */
-#define WAVE_PATCH	   _PATCHKEY(0x04)
-#define GUS_PATCH	   WAVE_PATCH
-#define WAVEFRONT_PATCH    _PATCHKEY(0x06)
-
-		short device_no;	/* Synthesizer number */
-		short instr_no;		/* Midi pgm# */
-
-		unsigned int mode;
-/*
- * The least significant byte has the same format than the GUS .PAT
- * files
- */
-#define WAVE_16_BITS	0x01	/* bit 0 = 8 or 16 bit wave data. */
-#define WAVE_UNSIGNED	0x02	/* bit 1 = Signed - Unsigned data. */
-#define WAVE_LOOPING	0x04	/* bit 2 = looping enabled-1. */
-#define WAVE_BIDIR_LOOP	0x08	/* bit 3 = Set is bidirectional looping. */
-#define WAVE_LOOP_BACK	0x10	/* bit 4 = Set is looping backward. */
-#define WAVE_SUSTAIN_ON	0x20	/* bit 5 = Turn sustaining on. (Env. pts. 3)*/
-#define WAVE_ENVELOPES	0x40	/* bit 6 = Enable envelopes - 1 */
-#define WAVE_FAST_RELEASE 0x80	/* bit 7 = Shut off immediately after note off */
-				/* 	(use the env_rate/env_offs fields). */
-/* Linux specific bits */
-#define WAVE_VIBRATO	0x00010000	/* The vibrato info is valid */
-#define WAVE_TREMOLO	0x00020000	/* The tremolo info is valid */
-#define WAVE_SCALE	0x00040000	/* The scaling info is valid */
-#define WAVE_FRACTIONS	0x00080000	/* Fraction information is valid */
-/* Reserved bits */
-#define WAVE_ROM	0x40000000	/* For future use */
-#define WAVE_MULAW	0x20000000	/* For future use */
-/* Other bits must be zeroed */
-
-		int len;	/* Size of the wave data in bytes */
-		int loop_start, loop_end; /* Byte offsets from the beginning */
-
-/* 
- * The base_freq and base_note fields are used when computing the
- * playback speed for a note. The base_note defines the tone frequency
- * which is heard if the sample is played using the base_freq as the
- * playback speed.
- *
- * The low_note and high_note fields define the minimum and maximum note
- * frequencies for which this sample is valid. It is possible to define
- * more than one samples for an instrument number at the same time. The
- * low_note and high_note fields are used to select the most suitable one.
- *
- * The fields base_note, high_note and low_note should contain
- * the note frequency multiplied by 1000. For example value for the
- * middle A is 440*1000.
- */
-
-		unsigned int base_freq;
-		unsigned int base_note;
-		unsigned int high_note;
-		unsigned int low_note;
-		int panning;	/* -128=left, 127=right */
-		int detuning;
-
-/*	New fields introduced in version 1.99.5	*/
-
-       /* Envelope. Enabled by mode bit WAVE_ENVELOPES	*/
-		unsigned char	env_rate[ 6 ];	 /* GUS HW ramping rate */
-		unsigned char	env_offset[ 6 ]; /* 255 == 100% */
-
-	/* 
-	 * The tremolo, vibrato and scale info are not supported yet.
-	 * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
-	 * WAVE_SCALE
-	 */
-
-		unsigned char	tremolo_sweep;
-		unsigned char	tremolo_rate;
-		unsigned char	tremolo_depth;
-	
-		unsigned char	vibrato_sweep;
-		unsigned char	vibrato_rate;
-		unsigned char	vibrato_depth;
-
-		int		scale_frequency;
-		unsigned int	scale_factor;		/* from 0 to 2048 or 0 to 2 */
-	
-	        int		volume;
-		int		fractions;
-		int		reserved1;
-	        int		spare[2];
-		char data[1];	/* The waveform data starts here */
-	};
-
-struct sysex_info {
-		short key;		/* Use SYSEX_PATCH or MAUI_PATCH here */
-#define SYSEX_PATCH	_PATCHKEY(0x05)
-#define MAUI_PATCH	_PATCHKEY(0x06)
-		short device_no;	/* Synthesizer number */
-		int len;	/* Size of the sysex data in bytes */
-		unsigned char data[1];	/* Sysex data starts here */
-	};
-
-/*
- * /dev/sequencer input events.
- *
- * The data written to the /dev/sequencer is a stream of events. Events
- * are records of 4 or 8 bytes. The first byte defines the size. 
- * Any number of events can be written with a write call. There
- * is a set of macros for sending these events. Use these macros if you
- * want to maximize portability of your program.
- *
- * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
- * (All input events are currently 4 bytes long. Be prepared to support
- * 8 byte events also. If you receive any event having first byte >= 128,
- * it's a 8 byte event.
- *
- * The events are documented at the end of this file.
- *
- * Normal events (4 bytes)
- * There is also a 8 byte version of most of the 4 byte events. The
- * 8 byte one is recommended.
- */
-#define SEQ_NOTEOFF		0
-#define SEQ_FMNOTEOFF		SEQ_NOTEOFF	/* Just old name */
-#define SEQ_NOTEON		1
-#define	SEQ_FMNOTEON		SEQ_NOTEON
-#define SEQ_WAIT		TMR_WAIT_ABS
-#define SEQ_PGMCHANGE		3
-#define SEQ_FMPGMCHANGE		SEQ_PGMCHANGE
-#define SEQ_SYNCTIMER		TMR_START
-#define SEQ_MIDIPUTC		5
-#define SEQ_DRUMON		6	/*** OBSOLETE ***/
-#define SEQ_DRUMOFF		7	/*** OBSOLETE ***/
-#define SEQ_ECHO		TMR_ECHO	/* For synching programs with output */
-#define SEQ_AFTERTOUCH		9
-#define SEQ_CONTROLLER		10
-
-/*******************************************
- *	Midi controller numbers
- *******************************************
- * Controllers 0 to 31 (0x00 to 0x1f) and
- * 32 to 63 (0x20 to 0x3f) are continuous
- * controllers.
- * In the MIDI 1.0 these controllers are sent using
- * two messages. Controller numbers 0 to 31 are used
- * to send the MSB and the controller numbers 32 to 63
- * are for the LSB. Note that just 7 bits are used in MIDI bytes.
- */
-
-#define	   CTL_BANK_SELECT		0x00
-#define	   CTL_MODWHEEL			0x01
-#define    CTL_BREATH			0x02
-/*		undefined		0x03 */
-#define    CTL_FOOT			0x04
-#define    CTL_PORTAMENTO_TIME		0x05
-#define    CTL_DATA_ENTRY		0x06
-#define    CTL_MAIN_VOLUME		0x07
-#define    CTL_BALANCE			0x08
-/*		undefined		0x09 */
-#define    CTL_PAN			0x0a
-#define    CTL_EXPRESSION		0x0b
-/*		undefined		0x0c */
-/*		undefined		0x0d */
-/*		undefined		0x0e */
-/*		undefined		0x0f */
-#define    CTL_GENERAL_PURPOSE1	0x10
-#define    CTL_GENERAL_PURPOSE2	0x11
-#define    CTL_GENERAL_PURPOSE3	0x12
-#define    CTL_GENERAL_PURPOSE4	0x13
-/*		undefined		0x14 - 0x1f */
-
-/*		undefined		0x20 */
-/* The controller numbers 0x21 to 0x3f are reserved for the */
-/* least significant bytes of the controllers 0x00 to 0x1f. */
-/* These controllers are not recognised by the driver. */
-
-/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */
-/* 0=OFF and 127=ON (intermediate values are possible) */
-#define    CTL_DAMPER_PEDAL		0x40
-#define    CTL_SUSTAIN			0x40	/* Alias */
-#define    CTL_HOLD			0x40	/* Alias */
-#define    CTL_PORTAMENTO		0x41
-#define    CTL_SOSTENUTO		0x42
-#define    CTL_SOFT_PEDAL		0x43
-/*		undefined		0x44 */
-#define    CTL_HOLD2			0x45
-/*		undefined		0x46 - 0x4f */
-
-#define    CTL_GENERAL_PURPOSE5	0x50
-#define    CTL_GENERAL_PURPOSE6	0x51
-#define    CTL_GENERAL_PURPOSE7	0x52
-#define    CTL_GENERAL_PURPOSE8	0x53
-/*		undefined		0x54 - 0x5a */
-#define    CTL_EXT_EFF_DEPTH		0x5b
-#define    CTL_TREMOLO_DEPTH		0x5c
-#define    CTL_CHORUS_DEPTH		0x5d
-#define    CTL_DETUNE_DEPTH		0x5e
-#define    CTL_CELESTE_DEPTH		0x5e	/* Alias for the above one */
-#define    CTL_PHASER_DEPTH		0x5f
-#define    CTL_DATA_INCREMENT		0x60
-#define    CTL_DATA_DECREMENT		0x61
-#define    CTL_NONREG_PARM_NUM_LSB	0x62
-#define    CTL_NONREG_PARM_NUM_MSB	0x63
-#define    CTL_REGIST_PARM_NUM_LSB	0x64
-#define    CTL_REGIST_PARM_NUM_MSB	0x65
-/*		undefined		0x66 - 0x78 */
-/*		reserved		0x79 - 0x7f */
-
-/* Pseudo controllers (not midi compatible) */
-#define    CTRL_PITCH_BENDER		255
-#define    CTRL_PITCH_BENDER_RANGE	254
-#define    CTRL_EXPRESSION		253	/* Obsolete */
-#define    CTRL_MAIN_VOLUME		252	/* Obsolete */
-#define SEQ_BALANCE		11
-#define SEQ_VOLMODE             12
-
-/*
- * Volume mode decides how volumes are used
- */
-
-#define VOL_METHOD_ADAGIO	1
-#define VOL_METHOD_LINEAR	2
-
-/*
- * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
- *	 input events.
- */
-
-/*
- * Event codes 0xf0 to 0xfc are reserved for future extensions.
- */
-
-#define SEQ_FULLSIZE		0xfd	/* Long events */
-/*
- *	SEQ_FULLSIZE events are used for loading patches/samples to the
- *	synthesizer devices. These events are passed directly to the driver
- *	of the associated synthesizer device. There is no limit to the size
- *	of the extended events. These events are not queued but executed
- *	immediately when the write() is called (execution can take several
- *	seconds of time). 
- *
- *	When a SEQ_FULLSIZE message is written to the device, it must
- *	be written using exactly one write() call. Other events cannot
- *	be mixed to the same write.
- *	
- *	For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the 
- *	/dev/sequencer. Don't write other data together with the instrument structure
- *	Set the key field of the structure to FM_PATCH. The device field is used to
- *	route the patch to the corresponding device.
- *
- *	For wave table use struct patch_info. Initialize the key field
- *      to WAVE_PATCH.
- */
-#define SEQ_PRIVATE		0xfe	/* Low level HW dependent events (8 bytes) */
-#define SEQ_EXTENDED		0xff	/* Extended events (8 bytes) OBSOLETE */
-
-/*
- * Record for FM patches
- */
-
-typedef unsigned char sbi_instr_data[32];
-
-struct sbi_instrument {
-		unsigned short	key;	/* FM_PATCH or OPL3_PATCH */
-#define FM_PATCH	_PATCHKEY(0x01)
-#define OPL3_PATCH	_PATCHKEY(0x03)
-		short		device;		/*	Synth# (0-4)	*/
-		int 		channel;	/*	Program# to be initialized 	*/
-		sbi_instr_data	operators;	/*	Register settings for operator cells (.SBI format)	*/
-	};
-
-struct synth_info {	/* Read only */
-		char	name[30];
-		int	device;		/* 0-N. INITIALIZE BEFORE CALLING */
-		int	synth_type;
-#define SYNTH_TYPE_FM			0
-#define SYNTH_TYPE_SAMPLE		1
-#define SYNTH_TYPE_MIDI			2	/* Midi interface */
-
-		int	synth_subtype;
-#define FM_TYPE_ADLIB			0x00
-#define FM_TYPE_OPL3			0x01
-#define MIDI_TYPE_MPU401		0x401
-
-#define SAMPLE_TYPE_BASIC		0x10
-#define SAMPLE_TYPE_GUS			SAMPLE_TYPE_BASIC
-#define SAMPLE_TYPE_WAVEFRONT           0x11
-
-		int	perc_mode;	/* No longer supported */
-		int	nr_voices;
-		int	nr_drums;	/* Obsolete field */
-		int	instr_bank_size;
-		unsigned int	capabilities;	
-#define SYNTH_CAP_PERCMODE		0x00000001 /* No longer used */
-#define SYNTH_CAP_OPL3			0x00000002 /* Set if OPL3 supported */
-#define SYNTH_CAP_INPUT			0x00000004 /* Input (MIDI) device */
-		int	dummies[19];	/* Reserve space */
-	};
-
-struct sound_timer_info {
-		char name[32];
-		int caps;
-	};
-
-#define MIDI_CAP_MPU401		1		/* MPU-401 intelligent mode */
-
-struct midi_info {
-		char		name[30];
-		int		device;		/* 0-N. INITIALIZE BEFORE CALLING */
-		unsigned int	capabilities;	/* To be defined later */
-		int		dev_type;
-		int		dummies[18];	/* Reserve space */
-	};
-
-/********************************************
- * ioctl commands for the /dev/midi##
- */
-typedef struct {
-		unsigned char cmd;
-		char nr_args, nr_returns;
-		unsigned char data[30];
-	} mpu_command_rec;
-
-#define SNDCTL_MIDI_PRETIME		_SIOWR('m', 0, int)
-#define SNDCTL_MIDI_MPUMODE		_SIOWR('m', 1, int)
-#define SNDCTL_MIDI_MPUCMD		_SIOWR('m', 2, mpu_command_rec)
-
-/********************************************
- * IOCTL commands for /dev/dsp and /dev/audio
- */
-
-#define SNDCTL_DSP_RESET		_SIO  ('P', 0)
-#define SNDCTL_DSP_SYNC			_SIO  ('P', 1)
-#define SNDCTL_DSP_SPEED		_SIOWR('P', 2, int)
-#define SNDCTL_DSP_STEREO		_SIOWR('P', 3, int)
-#define SNDCTL_DSP_GETBLKSIZE		_SIOWR('P', 4, int)
-#define SNDCTL_DSP_SAMPLESIZE		SNDCTL_DSP_SETFMT
-#define SNDCTL_DSP_CHANNELS		_SIOWR('P', 6, int)
-#define SOUND_PCM_WRITE_CHANNELS	SNDCTL_DSP_CHANNELS
-#define SOUND_PCM_WRITE_FILTER		_SIOWR('P', 7, int)
-#define SNDCTL_DSP_POST			_SIO  ('P', 8)
-#define SNDCTL_DSP_SUBDIVIDE		_SIOWR('P', 9, int)
-#define SNDCTL_DSP_SETFRAGMENT		_SIOWR('P',10, int)
-
-/*	Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */
-#define SNDCTL_DSP_GETFMTS		_SIOR ('P',11, int) /* Returns a mask */
-#define SNDCTL_DSP_SETFMT		_SIOWR('P',5, int) /* Selects ONE fmt*/
-#	define AFMT_QUERY		0x00000000	/* Return current fmt */
-#	define AFMT_MU_LAW		0x00000001
-#	define AFMT_A_LAW		0x00000002
-#	define AFMT_IMA_ADPCM		0x00000004
-#	define AFMT_U8			0x00000008
-#	define AFMT_S16_LE		0x00000010	/* Little endian signed 16*/
-#	define AFMT_S16_BE		0x00000020	/* Big endian signed 16 */
-#	define AFMT_S8			0x00000040
-#	define AFMT_U16_LE		0x00000080	/* Little endian U16 */
-#	define AFMT_U16_BE		0x00000100	/* Big endian U16 */
-#	define AFMT_MPEG		0x00000200	/* MPEG (2) audio */
-#	define AFMT_AC3		0x00000400	/* Dolby Digital AC3 */
-
-/*
- * Buffer status queries.
- */
-typedef struct audio_buf_info {
-			int fragments;	/* # of available fragments (partially usend ones not counted) */
-			int fragstotal;	/* Total # of fragments allocated */
-			int fragsize;	/* Size of a fragment in bytes */
-
-			int bytes;	/* Available space in bytes (includes partially used fragments) */
-			/* Note! 'bytes' could be more than fragments*fragsize */
-		} audio_buf_info;
-
-#define SNDCTL_DSP_GETOSPACE		_SIOR ('P',12, audio_buf_info)
-#define SNDCTL_DSP_GETISPACE		_SIOR ('P',13, audio_buf_info)
-#define SNDCTL_DSP_NONBLOCK		_SIO  ('P',14)
-#define SNDCTL_DSP_GETCAPS		_SIOR ('P',15, int)
-#	define DSP_CAP_REVISION		0x000000ff	/* Bits for revision level (0 to 255) */
-#	define DSP_CAP_DUPLEX		0x00000100	/* Full duplex record/playback */
-#	define DSP_CAP_REALTIME		0x00000200	/* Real time capability */
-#	define DSP_CAP_BATCH		0x00000400	/* Device has some kind of */
-							/* internal buffers which may */
-							/* cause some delays and */
-							/* decrease precision of timing */
-#	define DSP_CAP_COPROC		0x00000800	/* Has a coprocessor */
-							/* Sometimes it's a DSP */
-							/* but usually not */
-#	define DSP_CAP_TRIGGER		0x00001000	/* Supports SETTRIGGER */
-#	define DSP_CAP_MMAP		0x00002000	/* Supports mmap() */
-#	define DSP_CAP_MULTI		0x00004000	/* support multiple open */
-#	define DSP_CAP_BIND		0x00008000	/* channel binding to front/rear/cneter/lfe */
-
-
-#define SNDCTL_DSP_GETTRIGGER		_SIOR ('P',16, int)
-#define SNDCTL_DSP_SETTRIGGER		_SIOW ('P',16, int)
-#	define PCM_ENABLE_INPUT		0x00000001
-#	define PCM_ENABLE_OUTPUT		0x00000002
-
-typedef struct count_info {
-		int bytes;	/* Total # of bytes processed */
-		int blocks;	/* # of fragment transitions since last time */
-		int ptr;	/* Current DMA pointer value */
-	} count_info;
-
-#define SNDCTL_DSP_GETIPTR		_SIOR ('P',17, count_info)
-#define SNDCTL_DSP_GETOPTR		_SIOR ('P',18, count_info)
-
-typedef struct buffmem_desc {
-		unsigned *buffer;
-		int size;
-	} buffmem_desc;
-#define SNDCTL_DSP_MAPINBUF		_SIOR ('P', 19, buffmem_desc)
-#define SNDCTL_DSP_MAPOUTBUF		_SIOR ('P', 20, buffmem_desc)
-#define SNDCTL_DSP_SETSYNCRO		_SIO  ('P', 21)
-#define SNDCTL_DSP_SETDUPLEX		_SIO  ('P', 22)
-#define SNDCTL_DSP_GETODELAY		_SIOR ('P', 23, int)
-
-#define SNDCTL_DSP_GETCHANNELMASK		_SIOWR('P', 64, int)
-#define SNDCTL_DSP_BIND_CHANNEL		_SIOWR('P', 65, int)
-#	define DSP_BIND_QUERY		0x00000000
-#	define DSP_BIND_FRONT		0x00000001
-#	define DSP_BIND_SURR		0x00000002
-#	define DSP_BIND_CENTER_LFE	0x00000004
-#	define DSP_BIND_HANDSET		0x00000008
-#	define DSP_BIND_MIC		0x00000010
-#	define DSP_BIND_MODEM1		0x00000020
-#	define DSP_BIND_MODEM2		0x00000040
-#	define DSP_BIND_I2S		0x00000080
-#	define DSP_BIND_SPDIF		0x00000100
-
-#define SNDCTL_DSP_SETSPDIF		_SIOW ('P', 66, int)
-#define SNDCTL_DSP_GETSPDIF		_SIOR ('P', 67, int)
-#	define SPDIF_PRO	0x0001
-#	define SPDIF_N_AUD	0x0002
-#	define SPDIF_COPY	0x0004
-#	define SPDIF_PRE	0x0008
-#	define SPDIF_CC		0x07f0
-#	define SPDIF_L		0x0800
-#	define SPDIF_DRS	0x4000
-#	define SPDIF_V		0x8000
-
-/*
- * Application's profile defines the way how playback underrun situations should be handled.
- * 
- *	APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the
- *	playback buffer whenever an underrun occurs. This consumes some time
- *	prevents looping the existing buffer.
- *	APF_CPUINTENS is intended to be set by CPU intensive applications which
- *	are likely to run out of time occasionally. In this mode the buffer cleanup is
- *	disabled which saves CPU time but also let's the previous buffer content to
- *	be played during the "pause" after the underrun.
- */
-#define SNDCTL_DSP_PROFILE		_SIOW ('P', 23, int)
-#define	  APF_NORMAL	0	/* Normal applications */
-#define	  APF_NETWORK	1	/* Underruns probably caused by an "external" delay */
-#define   APF_CPUINTENS 2	/* Underruns probably caused by "overheating" the CPU */
-
-#define SOUND_PCM_READ_RATE		_SIOR ('P', 2, int)
-#define SOUND_PCM_READ_CHANNELS		_SIOR ('P', 6, int)
-#define SOUND_PCM_READ_BITS		_SIOR ('P', 5, int)
-#define SOUND_PCM_READ_FILTER		_SIOR ('P', 7, int)
-
-/* Some alias names */
-#define SOUND_PCM_WRITE_BITS		SNDCTL_DSP_SETFMT
-#define SOUND_PCM_WRITE_RATE		SNDCTL_DSP_SPEED
-#define SOUND_PCM_POST			SNDCTL_DSP_POST
-#define SOUND_PCM_RESET			SNDCTL_DSP_RESET
-#define SOUND_PCM_SYNC			SNDCTL_DSP_SYNC
-#define SOUND_PCM_SUBDIVIDE		SNDCTL_DSP_SUBDIVIDE
-#define SOUND_PCM_SETFRAGMENT		SNDCTL_DSP_SETFRAGMENT
-#define SOUND_PCM_GETFMTS		SNDCTL_DSP_GETFMTS
-#define SOUND_PCM_SETFMT		SNDCTL_DSP_SETFMT
-#define SOUND_PCM_GETOSPACE		SNDCTL_DSP_GETOSPACE
-#define SOUND_PCM_GETISPACE		SNDCTL_DSP_GETISPACE
-#define SOUND_PCM_NONBLOCK		SNDCTL_DSP_NONBLOCK
-#define SOUND_PCM_GETCAPS		SNDCTL_DSP_GETCAPS
-#define SOUND_PCM_GETTRIGGER		SNDCTL_DSP_GETTRIGGER
-#define SOUND_PCM_SETTRIGGER		SNDCTL_DSP_SETTRIGGER
-#define SOUND_PCM_SETSYNCRO		SNDCTL_DSP_SETSYNCRO
-#define SOUND_PCM_GETIPTR		SNDCTL_DSP_GETIPTR
-#define SOUND_PCM_GETOPTR		SNDCTL_DSP_GETOPTR
-#define SOUND_PCM_MAPINBUF		SNDCTL_DSP_MAPINBUF
-#define SOUND_PCM_MAPOUTBUF		SNDCTL_DSP_MAPOUTBUF
-
-/*
- * ioctl calls to be used in communication with coprocessors and
- * DSP chips.
- */
-
-typedef struct copr_buffer {
-		int command;	/* Set to 0 if not used */
-		int flags;
-#define CPF_NONE		0x0000
-#define CPF_FIRST		0x0001	/* First block */
-#define CPF_LAST		0x0002	/* Last block */
-		int len;
-		int offs;	/* If required by the device (0 if not used) */
-
-		unsigned char data[4000]; /* NOTE! 4000 is not 4k */
-	} copr_buffer;
-
-typedef struct copr_debug_buf {
-		int command;	/* Used internally. Set to 0 */
-		int parm1;
-		int parm2;
-		int flags;	
-		int len;	/* Length of data in bytes */
-	} copr_debug_buf;
-
-typedef struct copr_msg {
-		int len;
-		unsigned char data[4000];
-	} copr_msg;
-
-#define SNDCTL_COPR_RESET             _SIO  ('C',  0)
-#define SNDCTL_COPR_LOAD	      _SIOWR('C',  1, copr_buffer)
-#define SNDCTL_COPR_RDATA	      _SIOWR('C',  2, copr_debug_buf)
-#define SNDCTL_COPR_RCODE	      _SIOWR('C',  3, copr_debug_buf)
-#define SNDCTL_COPR_WDATA	      _SIOW ('C',  4, copr_debug_buf)
-#define SNDCTL_COPR_WCODE	      _SIOW ('C',  5, copr_debug_buf)
-#define SNDCTL_COPR_RUN		      _SIOWR('C',  6, copr_debug_buf)
-#define SNDCTL_COPR_HALT	      _SIOWR('C',  7, copr_debug_buf)
-#define SNDCTL_COPR_SENDMSG	      _SIOWR('C',  8, copr_msg)
-#define SNDCTL_COPR_RCVMSG	      _SIOR ('C',  9, copr_msg)
-
-/*********************************************
- * IOCTL commands for /dev/mixer
- */
-	
-/* 
- * Mixer devices
- *
- * There can be up to 20 different analog mixer channels. The
- * SOUND_MIXER_NRDEVICES gives the currently supported maximum. 
- * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
- * the devices supported by the particular mixer.
- */
-
-#define SOUND_MIXER_NRDEVICES	25
-#define SOUND_MIXER_VOLUME	0
-#define SOUND_MIXER_BASS	1
-#define SOUND_MIXER_TREBLE	2
-#define SOUND_MIXER_SYNTH	3
-#define SOUND_MIXER_PCM		4
-#define SOUND_MIXER_SPEAKER	5
-#define SOUND_MIXER_LINE	6
-#define SOUND_MIXER_MIC		7
-#define SOUND_MIXER_CD		8
-#define SOUND_MIXER_IMIX	9	/*  Recording monitor  */
-#define SOUND_MIXER_ALTPCM	10
-#define SOUND_MIXER_RECLEV	11	/* Recording level */
-#define SOUND_MIXER_IGAIN	12	/* Input gain */
-#define SOUND_MIXER_OGAIN	13	/* Output gain */
-/* 
- * The AD1848 codec and compatibles have three line level inputs
- * (line, aux1 and aux2). Since each card manufacturer have assigned
- * different meanings to these inputs, it's inpractical to assign
- * specific meanings (line, cd, synth etc.) to them.
- */
-#define SOUND_MIXER_LINE1	14	/* Input source 1  (aux1) */
-#define SOUND_MIXER_LINE2	15	/* Input source 2  (aux2) */
-#define SOUND_MIXER_LINE3	16	/* Input source 3  (line) */
-#define SOUND_MIXER_DIGITAL1	17	/* Digital (input) 1 */
-#define SOUND_MIXER_DIGITAL2	18	/* Digital (input) 2 */
-#define SOUND_MIXER_DIGITAL3	19	/* Digital (input) 3 */
-#define SOUND_MIXER_PHONEIN	20	/* Phone input */
-#define SOUND_MIXER_PHONEOUT	21	/* Phone output */
-#define SOUND_MIXER_VIDEO	22	/* Video/TV (audio) in */
-#define SOUND_MIXER_RADIO	23	/* Radio in */
-#define SOUND_MIXER_MONITOR	24	/* Monitor (usually mic) volume */
-
-/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */
-/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */
-#define SOUND_ONOFF_MIN		28
-#define SOUND_ONOFF_MAX		30
-
-/* Note!	Number 31 cannot be used since the sign bit is reserved */
-#define SOUND_MIXER_NONE	31
-
-/*
- * The following unsupported macros are no longer functional.
- * Use SOUND_MIXER_PRIVATE# macros in future.
- */
-#define SOUND_MIXER_ENHANCE	SOUND_MIXER_NONE
-#define SOUND_MIXER_MUTE	SOUND_MIXER_NONE
-#define SOUND_MIXER_LOUD	SOUND_MIXER_NONE
-
-
-#define SOUND_DEVICE_LABELS	{"Vol  ", "Bass ", "Trebl", "Synth", "Pcm  ", "Spkr ", "Line ", \
-				 "Mic  ", "CD   ", "Mix  ", "Pcm2 ", "Rec  ", "IGain", "OGain", \
-				 "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
-				 "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
-
-#define SOUND_DEVICE_NAMES	{"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
-				 "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
-				 "line1", "line2", "line3", "dig1", "dig2", "dig3", \
-				 "phin", "phout", "video", "radio", "monitor"}
-
-/*	Device bitmask identifiers	*/
-
-#define SOUND_MIXER_RECSRC	0xff	/* Arg contains a bit for each recording source */
-#define SOUND_MIXER_DEVMASK	0xfe	/* Arg contains a bit for each supported device */
-#define SOUND_MIXER_RECMASK	0xfd	/* Arg contains a bit for each supported recording source */
-#define SOUND_MIXER_CAPS	0xfc
-#	define SOUND_CAP_EXCL_INPUT	0x00000001	/* Only one recording source at a time */
-#define SOUND_MIXER_STEREODEVS	0xfb	/* Mixer channels supporting stereo */
-#define SOUND_MIXER_OUTSRC	0xfa	/* Arg contains a bit for each input source to output */
-#define SOUND_MIXER_OUTMASK	0xf9	/* Arg contains a bit for each supported input source to output */
-
-/*	Device mask bits	*/
-
-#define SOUND_MASK_VOLUME	(1 << SOUND_MIXER_VOLUME)
-#define SOUND_MASK_BASS		(1 << SOUND_MIXER_BASS)
-#define SOUND_MASK_TREBLE	(1 << SOUND_MIXER_TREBLE)
-#define SOUND_MASK_SYNTH	(1 << SOUND_MIXER_SYNTH)
-#define SOUND_MASK_PCM		(1 << SOUND_MIXER_PCM)
-#define SOUND_MASK_SPEAKER	(1 << SOUND_MIXER_SPEAKER)
-#define SOUND_MASK_LINE		(1 << SOUND_MIXER_LINE)
-#define SOUND_MASK_MIC		(1 << SOUND_MIXER_MIC)
-#define SOUND_MASK_CD		(1 << SOUND_MIXER_CD)
-#define SOUND_MASK_IMIX		(1 << SOUND_MIXER_IMIX)
-#define SOUND_MASK_ALTPCM	(1 << SOUND_MIXER_ALTPCM)
-#define SOUND_MASK_RECLEV	(1 << SOUND_MIXER_RECLEV)
-#define SOUND_MASK_IGAIN	(1 << SOUND_MIXER_IGAIN)
-#define SOUND_MASK_OGAIN	(1 << SOUND_MIXER_OGAIN)
-#define SOUND_MASK_LINE1	(1 << SOUND_MIXER_LINE1)
-#define SOUND_MASK_LINE2	(1 << SOUND_MIXER_LINE2)
-#define SOUND_MASK_LINE3	(1 << SOUND_MIXER_LINE3)
-#define SOUND_MASK_DIGITAL1	(1 << SOUND_MIXER_DIGITAL1)
-#define SOUND_MASK_DIGITAL2	(1 << SOUND_MIXER_DIGITAL2)
-#define SOUND_MASK_DIGITAL3	(1 << SOUND_MIXER_DIGITAL3)
-#define SOUND_MASK_PHONEIN	(1 << SOUND_MIXER_PHONEIN)
-#define SOUND_MASK_PHONEOUT	(1 << SOUND_MIXER_PHONEOUT)
-#define SOUND_MASK_RADIO	(1 << SOUND_MIXER_RADIO)
-#define SOUND_MASK_VIDEO	(1 << SOUND_MIXER_VIDEO)
-#define SOUND_MASK_MONITOR	(1 << SOUND_MIXER_MONITOR)
-
-/* Obsolete macros */
-#define SOUND_MASK_MUTE		(1 << SOUND_MIXER_MUTE)
-#define SOUND_MASK_ENHANCE	(1 << SOUND_MIXER_ENHANCE)
-#define SOUND_MASK_LOUD		(1 << SOUND_MIXER_LOUD)
-
-#define MIXER_READ(dev)		_SIOR('M', dev, int)
-#define SOUND_MIXER_READ_VOLUME		MIXER_READ(SOUND_MIXER_VOLUME)
-#define SOUND_MIXER_READ_BASS		MIXER_READ(SOUND_MIXER_BASS)
-#define SOUND_MIXER_READ_TREBLE		MIXER_READ(SOUND_MIXER_TREBLE)
-#define SOUND_MIXER_READ_SYNTH		MIXER_READ(SOUND_MIXER_SYNTH)
-#define SOUND_MIXER_READ_PCM		MIXER_READ(SOUND_MIXER_PCM)
-#define SOUND_MIXER_READ_SPEAKER	MIXER_READ(SOUND_MIXER_SPEAKER)
-#define SOUND_MIXER_READ_LINE		MIXER_READ(SOUND_MIXER_LINE)
-#define SOUND_MIXER_READ_MIC		MIXER_READ(SOUND_MIXER_MIC)
-#define SOUND_MIXER_READ_CD		MIXER_READ(SOUND_MIXER_CD)
-#define SOUND_MIXER_READ_IMIX		MIXER_READ(SOUND_MIXER_IMIX)
-#define SOUND_MIXER_READ_ALTPCM		MIXER_READ(SOUND_MIXER_ALTPCM)
-#define SOUND_MIXER_READ_RECLEV		MIXER_READ(SOUND_MIXER_RECLEV)
-#define SOUND_MIXER_READ_IGAIN		MIXER_READ(SOUND_MIXER_IGAIN)
-#define SOUND_MIXER_READ_OGAIN		MIXER_READ(SOUND_MIXER_OGAIN)
-#define SOUND_MIXER_READ_LINE1		MIXER_READ(SOUND_MIXER_LINE1)
-#define SOUND_MIXER_READ_LINE2		MIXER_READ(SOUND_MIXER_LINE2)
-#define SOUND_MIXER_READ_LINE3		MIXER_READ(SOUND_MIXER_LINE3)
-
-/* Obsolete macros */
-#define SOUND_MIXER_READ_MUTE		MIXER_READ(SOUND_MIXER_MUTE)
-#define SOUND_MIXER_READ_ENHANCE	MIXER_READ(SOUND_MIXER_ENHANCE)
-#define SOUND_MIXER_READ_LOUD		MIXER_READ(SOUND_MIXER_LOUD)
-
-#define SOUND_MIXER_READ_RECSRC		MIXER_READ(SOUND_MIXER_RECSRC)
-#define SOUND_MIXER_READ_DEVMASK	MIXER_READ(SOUND_MIXER_DEVMASK)
-#define SOUND_MIXER_READ_RECMASK	MIXER_READ(SOUND_MIXER_RECMASK)
-#define SOUND_MIXER_READ_STEREODEVS	MIXER_READ(SOUND_MIXER_STEREODEVS)
-#define SOUND_MIXER_READ_CAPS		MIXER_READ(SOUND_MIXER_CAPS)
-
-#define MIXER_WRITE(dev)		_SIOWR('M', dev, int)
-#define SOUND_MIXER_WRITE_VOLUME	MIXER_WRITE(SOUND_MIXER_VOLUME)
-#define SOUND_MIXER_WRITE_BASS		MIXER_WRITE(SOUND_MIXER_BASS)
-#define SOUND_MIXER_WRITE_TREBLE	MIXER_WRITE(SOUND_MIXER_TREBLE)
-#define SOUND_MIXER_WRITE_SYNTH		MIXER_WRITE(SOUND_MIXER_SYNTH)
-#define SOUND_MIXER_WRITE_PCM		MIXER_WRITE(SOUND_MIXER_PCM)
-#define SOUND_MIXER_WRITE_SPEAKER	MIXER_WRITE(SOUND_MIXER_SPEAKER)
-#define SOUND_MIXER_WRITE_LINE		MIXER_WRITE(SOUND_MIXER_LINE)
-#define SOUND_MIXER_WRITE_MIC		MIXER_WRITE(SOUND_MIXER_MIC)
-#define SOUND_MIXER_WRITE_CD		MIXER_WRITE(SOUND_MIXER_CD)
-#define SOUND_MIXER_WRITE_IMIX		MIXER_WRITE(SOUND_MIXER_IMIX)
-#define SOUND_MIXER_WRITE_ALTPCM	MIXER_WRITE(SOUND_MIXER_ALTPCM)
-#define SOUND_MIXER_WRITE_RECLEV	MIXER_WRITE(SOUND_MIXER_RECLEV)
-#define SOUND_MIXER_WRITE_IGAIN		MIXER_WRITE(SOUND_MIXER_IGAIN)
-#define SOUND_MIXER_WRITE_OGAIN		MIXER_WRITE(SOUND_MIXER_OGAIN)
-#define SOUND_MIXER_WRITE_LINE1		MIXER_WRITE(SOUND_MIXER_LINE1)
-#define SOUND_MIXER_WRITE_LINE2		MIXER_WRITE(SOUND_MIXER_LINE2)
-#define SOUND_MIXER_WRITE_LINE3		MIXER_WRITE(SOUND_MIXER_LINE3)
-
-/* Obsolete macros */
-#define SOUND_MIXER_WRITE_MUTE		MIXER_WRITE(SOUND_MIXER_MUTE)
-#define SOUND_MIXER_WRITE_ENHANCE	MIXER_WRITE(SOUND_MIXER_ENHANCE)
-#define SOUND_MIXER_WRITE_LOUD		MIXER_WRITE(SOUND_MIXER_LOUD)
-
-#define SOUND_MIXER_WRITE_RECSRC	MIXER_WRITE(SOUND_MIXER_RECSRC)
-
-typedef struct mixer_info
-{
-  char id[16];
-  char name[32];
-  int  modify_counter;
-  int fillers[10];
-} mixer_info;
-
-typedef struct _old_mixer_info /* Obsolete */
-{
-  char id[16];
-  char name[32];
-} _old_mixer_info;
-
-#define SOUND_MIXER_INFO		_SIOR ('M', 101, mixer_info)
-#define SOUND_OLD_MIXER_INFO		_SIOR ('M', 101, _old_mixer_info)
-
-/*
- * A mechanism for accessing "proprietary" mixer features. This method
- * permits passing 128 bytes of arbitrary data between a mixer application
- * and the mixer driver. Interpretation of the record is defined by
- * the particular mixer driver.
- */
-typedef unsigned char mixer_record[128];
-
-#define SOUND_MIXER_ACCESS		_SIOWR('M', 102, mixer_record)
-
-/*
- * Two ioctls for special souncard function
- */
-#define SOUND_MIXER_AGC  _SIOWR('M', 103, int)
-#define SOUND_MIXER_3DSE  _SIOWR('M', 104, int)
-
-/*
- * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers.
- * These features can be used when accessing device specific features.
- */
-#define SOUND_MIXER_PRIVATE1		_SIOWR('M', 111, int)
-#define SOUND_MIXER_PRIVATE2		_SIOWR('M', 112, int)
-#define SOUND_MIXER_PRIVATE3		_SIOWR('M', 113, int)
-#define SOUND_MIXER_PRIVATE4		_SIOWR('M', 114, int)
-#define SOUND_MIXER_PRIVATE5		_SIOWR('M', 115, int)
-
-/*
- * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used
- * for querying current mixer settings from the driver and for loading
- * default volume settings _prior_ activating the mixer (loading
- * doesn't affect current state of the mixer hardware). These calls
- * are for internal use only.
- */
-
-typedef struct mixer_vol_table {
-  int num;	/* Index to volume table */
-  char name[32];
-  int levels[32];
-} mixer_vol_table;
-
-#define SOUND_MIXER_GETLEVELS		_SIOWR('M', 116, mixer_vol_table)
-#define SOUND_MIXER_SETLEVELS		_SIOWR('M', 117, mixer_vol_table)
-
-/* 
- * An ioctl for identifying the driver version. It will return value
- * of the SOUND_VERSION macro used when compiling the driver.
- * This call was introduced in OSS version 3.6 and it will not work
- * with earlier versions (returns EINVAL).
- */
-#define OSS_GETVERSION			_SIOR ('M', 118, int)
-
-/*
- * Level 2 event types for /dev/sequencer
- */
-
-/*
- * The 4 most significant bits of byte 0 specify the class of
- * the event: 
- *
- *	0x8X = system level events,
- *	0x9X = device/port specific events, event[1] = device/port,
- *		The last 4 bits give the subtype:
- *			0x02	= Channel event (event[3] = chn).
- *			0x01	= note event (event[4] = note).
- *			(0x01 is not used alone but always with bit 0x02).
- *	       event[2] = MIDI message code (0x80=note off etc.)
- *
- */
-
-#define EV_SEQ_LOCAL		0x80
-#define EV_TIMING		0x81
-#define EV_CHN_COMMON		0x92
-#define EV_CHN_VOICE		0x93
-#define EV_SYSEX		0x94
-/*
- * Event types 200 to 220 are reserved for application use.
- * These numbers will not be used by the driver.
- */
-
-/*
- * Events for event type EV_CHN_VOICE
- */
-
-#define MIDI_NOTEOFF		0x80
-#define MIDI_NOTEON		0x90
-#define MIDI_KEY_PRESSURE	0xA0
-
-/*
- * Events for event type EV_CHN_COMMON
- */
-
-#define MIDI_CTL_CHANGE		0xB0
-#define MIDI_PGM_CHANGE		0xC0
-#define MIDI_CHN_PRESSURE	0xD0
-#define MIDI_PITCH_BEND		0xE0
-
-#define MIDI_SYSTEM_PREFIX	0xF0
-
-/*
- * Timer event types
- */
-#define TMR_WAIT_REL		1	/* Time relative to the prev time */
-#define TMR_WAIT_ABS		2	/* Absolute time since TMR_START */
-#define TMR_STOP		3
-#define TMR_START		4
-#define TMR_CONTINUE		5
-#define TMR_TEMPO		6
-#define TMR_ECHO		8
-#define TMR_CLOCK		9	/* MIDI clock */
-#define TMR_SPP			10	/* Song position pointer */
-#define TMR_TIMESIG		11	/* Time signature */
-
-/*
- *	Local event types
- */
-#define LOCL_STARTAUDIO		1
-
-#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS)
-/*
- *	Some convenience macros to simplify programming of the
- *	/dev/sequencer interface
- *
- *	This is a legacy interface for applications written against
- *	the OSSlib-3.8 style interface. It is no longer possible
- *	to actually link against OSSlib with this header, but we
- *	still provide these macros for programs using them.
- *
- *	If you want to use OSSlib, it is recommended that you get
- *	the GPL version of OSS-4.x and build against that version
- *	of the header.
- *
- *	We redefine the extern keyword so that make headers_check
- *	does not complain about SEQ_USE_EXTBUF.
- */
-#define SEQ_DECLAREBUF()		SEQ_USE_EXTBUF()
-
-void seqbuf_dump(void);	/* This function must be provided by programs */
-
-#define SEQ_PM_DEFINES int __foo_bar___
-
-#define SEQ_LOAD_GMINSTR(dev, instr)
-#define SEQ_LOAD_GMDRUM(dev, drum)
-
-#define _SEQ_EXTERN extern
-#define SEQ_USE_EXTBUF() \
-		_SEQ_EXTERN unsigned char _seqbuf[]; \
-		_SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr
-
-#ifndef USE_SIMPLE_MACROS
-/* Sample seqbuf_dump() implementation:
- *
- *	SEQ_DEFINEBUF (2048);	-- Defines a buffer for 2048 bytes
- *
- *	int seqfd;		-- The file descriptor for /dev/sequencer.
- *
- *	void
- *	seqbuf_dump ()
- *	{
- *	  if (_seqbufptr)
- *	    if (write (seqfd, _seqbuf, _seqbufptr) == -1)
- *	      {
- *		perror ("write /dev/sequencer");
- *		exit (-1);
- *	      }
- *	  _seqbufptr = 0;
- *	}
- */
-
-#define SEQ_DEFINEBUF(len)		unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
-#define _SEQ_NEEDBUF(len)		if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump()
-#define _SEQ_ADVBUF(len)		_seqbufptr += len
-#define SEQ_DUMPBUF			seqbuf_dump
-#else
-/*
- * This variation of the sequencer macros is used just to format one event
- * using fixed buffer.
- * 
- * The program using the macro library must define the following macros before
- * using this library.
- *
- * #define _seqbuf 		 name of the buffer (unsigned char[]) 
- * #define _SEQ_ADVBUF(len)	 If the applic needs to know the exact
- *				 size of the event, this macro can be used.
- *				 Otherwise this must be defined as empty.
- * #define _seqbufptr		 Define the name of index variable or 0 if
- *				 not required. 
- */
-#define _SEQ_NEEDBUF(len)	/* empty */
-#endif
-
-#define SEQ_VOLUME_MODE(dev, mode)	{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
-					_seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
-					_seqbuf[_seqbufptr+2] = (dev);\
-					_seqbuf[_seqbufptr+3] = (mode);\
-					_seqbuf[_seqbufptr+4] = 0;\
-					_seqbuf[_seqbufptr+5] = 0;\
-					_seqbuf[_seqbufptr+6] = 0;\
-					_seqbuf[_seqbufptr+7] = 0;\
-					_SEQ_ADVBUF(8);}
-
-/*
- * Midi voice messages
- */
-
-#define _CHN_VOICE(dev, event, chn, note, parm) \
-					{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = EV_CHN_VOICE;\
-					_seqbuf[_seqbufptr+1] = (dev);\
-					_seqbuf[_seqbufptr+2] = (event);\
-					_seqbuf[_seqbufptr+3] = (chn);\
-					_seqbuf[_seqbufptr+4] = (note);\
-					_seqbuf[_seqbufptr+5] = (parm);\
-					_seqbuf[_seqbufptr+6] = (0);\
-					_seqbuf[_seqbufptr+7] = 0;\
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_START_NOTE(dev, chn, note, vol) \
-		_CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
-
-#define SEQ_STOP_NOTE(dev, chn, note, vol) \
-		_CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
-
-#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
-		_CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
-
-/*
- * Midi channel messages
- */
-
-#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \
-					{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = EV_CHN_COMMON;\
-					_seqbuf[_seqbufptr+1] = (dev);\
-					_seqbuf[_seqbufptr+2] = (event);\
-					_seqbuf[_seqbufptr+3] = (chn);\
-					_seqbuf[_seqbufptr+4] = (p1);\
-					_seqbuf[_seqbufptr+5] = (p2);\
-					*(short *)&_seqbuf[_seqbufptr+6] = (w14);\
-					_SEQ_ADVBUF(8);}
-/*
- * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
- * sending any MIDI bytes but it's absolutely not possible. Trying to do
- * so _will_ cause problems with MPU401 intelligent mode).
- *
- * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be 
- * sent by calling SEQ_SYSEX() several times (there must be no other events
- * between them). First sysex fragment must have 0xf0 in the first byte
- * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
- * between these sysex start and end markers cannot be larger than 0x7f. Also
- * lengths of each fragments (except the last one) must be 6.
- *
- * Breaking the above rules may work with some MIDI ports but is likely to
- * cause fatal problems with some other devices (such as MPU401).
- */
-#define SEQ_SYSEX(dev, buf, len) \
-					{int ii, ll=(len); \
-					 unsigned char *bufp=buf;\
-					 if (ll>6)ll=6;\
-					_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = EV_SYSEX;\
-					_seqbuf[_seqbufptr+1] = (dev);\
-					for(ii=0;ii<ll;ii++)\
-					   _seqbuf[_seqbufptr+ii+2] = bufp[ii];\
-					for(ii=ll;ii<6;ii++)\
-					   _seqbuf[_seqbufptr+ii+2] = 0xff;\
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_CHN_PRESSURE(dev, chn, pressure) \
-		_CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
-
-#define SEQ_SET_PATCH SEQ_PGM_CHANGE
-#define SEQ_PGM_CHANGE(dev, chn, patch) \
-		_CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
-
-#define SEQ_CONTROL(dev, chn, controller, value) \
-		_CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
-
-#define SEQ_BENDER(dev, chn, value) \
-		_CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
-
-
-#define SEQ_V2_X_CONTROL(dev, voice, controller, value)	{_SEQ_NEEDBUF(8);\
-					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
-					_seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
-					_seqbuf[_seqbufptr+2] = (dev);\
-					_seqbuf[_seqbufptr+3] = (voice);\
-					_seqbuf[_seqbufptr+4] = (controller);\
-					_seqbuf[_seqbufptr+5] = ((value)&0xff);\
-					_seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\
-					_seqbuf[_seqbufptr+7] = 0;\
-					_SEQ_ADVBUF(8);}
-/*
- * The following 5 macros are incorrectly implemented and obsolete.
- * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
- */
-#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
-#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
-#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
-#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
-#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
-
-/*
- * Timing and synchronization macros
- */
-
-#define _TIMER_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
-				 	_seqbuf[_seqbufptr+0] = EV_TIMING; \
-				 	_seqbuf[_seqbufptr+1] = (ev); \
-					_seqbuf[_seqbufptr+2] = 0;\
-					_seqbuf[_seqbufptr+3] = 0;\
-				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_START_TIMER()		_TIMER_EVENT(TMR_START, 0)
-#define SEQ_STOP_TIMER()		_TIMER_EVENT(TMR_STOP, 0)
-#define SEQ_CONTINUE_TIMER()		_TIMER_EVENT(TMR_CONTINUE, 0)
-#define SEQ_WAIT_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_ABS, ticks)
-#define SEQ_DELTA_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_REL, ticks)
-#define SEQ_ECHO_BACK(key)		_TIMER_EVENT(TMR_ECHO, key)
-#define SEQ_SET_TEMPO(value)		_TIMER_EVENT(TMR_TEMPO, value)
-#define SEQ_SONGPOS(pos)		_TIMER_EVENT(TMR_SPP, pos)
-#define SEQ_TIME_SIGNATURE(sig)		_TIMER_EVENT(TMR_TIMESIG, sig)
-
-/*
- * Local control events
- */
-
-#define _LOCAL_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
-				 	_seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
-				 	_seqbuf[_seqbufptr+1] = (ev); \
-					_seqbuf[_seqbufptr+2] = 0;\
-					_seqbuf[_seqbufptr+3] = 0;\
-				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
-					_SEQ_ADVBUF(8);}
-
-#define SEQ_PLAYAUDIO(devmask)		_LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
-/*
- * Events for the level 1 interface only 
- */
-
-#define SEQ_MIDIOUT(device, byte)	{_SEQ_NEEDBUF(4);\
-					_seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
-					_seqbuf[_seqbufptr+1] = (byte);\
-					_seqbuf[_seqbufptr+2] = (device);\
-					_seqbuf[_seqbufptr+3] = 0;\
-					_SEQ_ADVBUF(4);}
-
-/*
- * Patch loading.
- */
-#define SEQ_WRPATCH(patchx, len) \
-		{if (_seqbufptr) SEQ_DUMPBUF();\
-		 if (write(seqfd, (char*)(patchx), len)==-1) \
-		    perror("Write patch: /dev/sequencer");}
-#define SEQ_WRPATCH2(patchx, len) \
-		(SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
-
-#endif
 #endif
diff --git a/include/linux/spi/Kbuild b/include/linux/spi/Kbuild
index d375a08..e69de29 100644
--- a/include/linux/spi/Kbuild
+++ b/include/linux/spi/Kbuild
@@ -1 +0,0 @@
-header-y += spidev.h
diff --git a/include/linux/stat.h b/include/linux/stat.h
index 4613240..075cb0c 100644
--- a/include/linux/stat.h
+++ b/include/linux/stat.h
@@ -1,52 +1,10 @@
 #ifndef _LINUX_STAT_H
 #define _LINUX_STAT_H
 
-#ifdef __KERNEL__
 
 #include <asm/stat.h>
+#include <uapi/linux/stat.h>
 
-#endif
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#define S_IFMT  00170000
-#define S_IFSOCK 0140000
-#define S_IFLNK	 0120000
-#define S_IFREG  0100000
-#define S_IFBLK  0060000
-#define S_IFDIR  0040000
-#define S_IFCHR  0020000
-#define S_IFIFO  0010000
-#define S_ISUID  0004000
-#define S_ISGID  0002000
-#define S_ISVTX  0001000
-
-#define S_ISLNK(m)	(((m) & S_IFMT) == S_IFLNK)
-#define S_ISREG(m)	(((m) & S_IFMT) == S_IFREG)
-#define S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
-#define S_ISCHR(m)	(((m) & S_IFMT) == S_IFCHR)
-#define S_ISBLK(m)	(((m) & S_IFMT) == S_IFBLK)
-#define S_ISFIFO(m)	(((m) & S_IFMT) == S_IFIFO)
-#define S_ISSOCK(m)	(((m) & S_IFMT) == S_IFSOCK)
-
-#define S_IRWXU 00700
-#define S_IRUSR 00400
-#define S_IWUSR 00200
-#define S_IXUSR 00100
-
-#define S_IRWXG 00070
-#define S_IRGRP 00040
-#define S_IWGRP 00020
-#define S_IXGRP 00010
-
-#define S_IRWXO 00007
-#define S_IROTH 00004
-#define S_IWOTH 00002
-#define S_IXOTH 00001
-
-#endif
-
-#ifdef __KERNEL__
 #define S_IRWXUGO	(S_IRWXU|S_IRWXG|S_IRWXO)
 #define S_IALLUGO	(S_ISUID|S_ISGID|S_ISVTX|S_IRWXUGO)
 #define S_IRUGO		(S_IRUSR|S_IRGRP|S_IROTH)
@@ -77,5 +35,3 @@
 };
 
 #endif
-
-#endif
diff --git a/include/linux/stddef.h b/include/linux/stddef.h
index 1747b67..f4aec0e 100644
--- a/include/linux/stddef.h
+++ b/include/linux/stddef.h
@@ -1,9 +1,8 @@
 #ifndef _LINUX_STDDEF_H
 #define _LINUX_STDDEF_H
 
-#include <linux/compiler.h>
+#include <uapi/linux/stddef.h>
 
-#ifdef __KERNEL__
 
 #undef NULL
 #define NULL ((void *)0)
@@ -19,6 +18,4 @@
 #else
 #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
 #endif
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/string.h b/include/linux/string.h
index b917881..63012581 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -1,16 +1,12 @@
 #ifndef _LINUX_STRING_H_
 #define _LINUX_STRING_H_
 
-/* We don't want strings.h stuff being used by user stuff by accident */
-
-#ifndef __KERNEL__
-#include <string.h>
-#else
 
 #include <linux/compiler.h>	/* for inline */
 #include <linux/types.h>	/* for size_t */
 #include <linux/stddef.h>	/* for NULL */
 #include <stdarg.h>
+#include <uapi/linux/string.h>
 
 extern char *strndup_user(const char __user *, long);
 extern void *memdup_user(const void __user *, size_t);
@@ -147,5 +143,4 @@
 
 extern size_t memweight(const void *ptr, size_t bytes);
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_STRING_H_ */
diff --git a/include/linux/sunrpc/Kbuild b/include/linux/sunrpc/Kbuild
index 98df211..e69de29 100644
--- a/include/linux/sunrpc/Kbuild
+++ b/include/linux/sunrpc/Kbuild
@@ -1 +0,0 @@
-header-y += debug.h
diff --git a/include/linux/sunrpc/debug.h b/include/linux/sunrpc/debug.h
index a76cc20..9385bd7 100644
--- a/include/linux/sunrpc/debug.h
+++ b/include/linux/sunrpc/debug.h
@@ -5,28 +5,11 @@
  *
  * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
  */
-
 #ifndef _LINUX_SUNRPC_DEBUG_H_
 #define _LINUX_SUNRPC_DEBUG_H_
 
-/*
- * RPC debug facilities
- */
-#define RPCDBG_XPRT		0x0001
-#define RPCDBG_CALL		0x0002
-#define RPCDBG_DEBUG		0x0004
-#define RPCDBG_NFS		0x0008
-#define RPCDBG_AUTH		0x0010
-#define RPCDBG_BIND		0x0020
-#define RPCDBG_SCHED		0x0040
-#define RPCDBG_TRANS		0x0080
-#define RPCDBG_SVCXPRT		0x0100
-#define RPCDBG_SVCDSP		0x0200
-#define RPCDBG_MISC		0x0400
-#define RPCDBG_CACHE		0x0800
-#define RPCDBG_ALL		0x7fff
+#include <uapi/linux/sunrpc/debug.h>
 
-#ifdef __KERNEL__
 
 /*
  * Enable RPC debugging/profiling.
@@ -87,24 +70,4 @@
 void		rpc_unregister_sysctl(void);
 #endif
 
-#endif /* __KERNEL__ */
-
-/*
- * Declarations for the sysctl debug interface, which allows to read or
- * change the debug flags for rpc, nfs, nfsd, and lockd. Since the sunrpc
- * module currently registers its sysctl table dynamically, the sysctl path
- * for module FOO is <CTL_SUNRPC, CTL_FOODEBUG>.
- */
-
-enum {
-	CTL_RPCDEBUG = 1,
-	CTL_NFSDEBUG,
-	CTL_NFSDDEBUG,
-	CTL_NLMDEBUG,
-	CTL_SLOTTABLE_UDP,
-	CTL_SLOTTABLE_TCP,
-	CTL_MIN_RESVPORT,
-	CTL_MAX_RESVPORT,
-};
-
 #endif /* _LINUX_SUNRPC_DEBUG_H_ */
diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h
index b3f64b1..b05963f 100644
--- a/include/linux/sunrpc/svc_xprt.h
+++ b/include/linux/sunrpc/svc_xprt.h
@@ -114,7 +114,6 @@
 int	svc_create_xprt(struct svc_serv *, const char *, struct net *,
 			const int, const unsigned short, int);
 void	svc_xprt_enqueue(struct svc_xprt *xprt);
-void	svc_xprt_received(struct svc_xprt *);
 void	svc_xprt_put(struct svc_xprt *xprt);
 void	svc_xprt_copy_addrs(struct svc_rqst *rqstp, struct svc_xprt *xprt);
 void	svc_close_xprt(struct svc_xprt *xprt);
@@ -124,6 +123,7 @@
 			struct net *net, const sa_family_t af,
 			const unsigned short port);
 int	svc_xprt_names(struct svc_serv *serv, char *buf, const int buflen);
+void	svc_add_new_perm_xprt(struct svc_serv *serv, struct svc_xprt *xprt);
 
 static inline void svc_xprt_get(struct svc_xprt *xprt)
 {
@@ -166,8 +166,7 @@
 	case AF_INET6:
 		return sizeof(struct sockaddr_in6);
 	}
-
-	return 0;
+	BUG();
 }
 
 static inline unsigned short svc_xprt_local_port(const struct svc_xprt *xprt)
diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h
index cb4ac69..92ad02f 100644
--- a/include/linux/sunrpc/svcsock.h
+++ b/include/linux/sunrpc/svcsock.h
@@ -39,9 +39,6 @@
 int		svc_send(struct svc_rqst *);
 void		svc_drop(struct svc_rqst *);
 void		svc_sock_update_bufs(struct svc_serv *serv);
-int		svc_sock_names(struct svc_serv *serv, char *buf,
-					const size_t buflen,
-					const char *toclose);
 int		svc_addsock(struct svc_serv *serv, const int fd,
 					char *name_return, const size_t len);
 void		svc_init_xprt_sock(void);
diff --git a/include/linux/swab.h b/include/linux/swab.h
index ea0c02f..9ad3c60 100644
--- a/include/linux/swab.h
+++ b/include/linux/swab.h
@@ -1,284 +1,8 @@
 #ifndef _LINUX_SWAB_H
 #define _LINUX_SWAB_H
 
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <asm/swab.h>
+#include <uapi/linux/swab.h>
 
-/*
- * casts are necessary for constants, because we never know how for sure
- * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
- */
-#define ___constant_swab16(x) ((__u16)(				\
-	(((__u16)(x) & (__u16)0x00ffU) << 8) |			\
-	(((__u16)(x) & (__u16)0xff00U) >> 8)))
-
-#define ___constant_swab32(x) ((__u32)(				\
-	(((__u32)(x) & (__u32)0x000000ffUL) << 24) |		\
-	(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |		\
-	(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |		\
-	(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
-
-#define ___constant_swab64(x) ((__u64)(				\
-	(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) |	\
-	(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) |	\
-	(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) |	\
-	(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) |	\
-	(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) |	\
-	(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) |	\
-	(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) |	\
-	(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
-
-#define ___constant_swahw32(x) ((__u32)(			\
-	(((__u32)(x) & (__u32)0x0000ffffUL) << 16) |		\
-	(((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
-
-#define ___constant_swahb32(x) ((__u32)(			\
-	(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) |		\
-	(((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
-
-/*
- * Implement the following as inlines, but define the interface using
- * macros to allow constant folding when possible:
- * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
- */
-
-static inline __attribute_const__ __u16 __fswab16(__u16 val)
-{
-#ifdef __arch_swab16
-	return __arch_swab16(val);
-#else
-	return ___constant_swab16(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswab32(__u32 val)
-{
-#ifdef __arch_swab32
-	return __arch_swab32(val);
-#else
-	return ___constant_swab32(val);
-#endif
-}
-
-static inline __attribute_const__ __u64 __fswab64(__u64 val)
-{
-#ifdef __arch_swab64
-	return __arch_swab64(val);
-#elif defined(__SWAB_64_THRU_32__)
-	__u32 h = val >> 32;
-	__u32 l = val & ((1ULL << 32) - 1);
-	return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h)));
-#else
-	return ___constant_swab64(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswahw32(__u32 val)
-{
-#ifdef __arch_swahw32
-	return __arch_swahw32(val);
-#else
-	return ___constant_swahw32(val);
-#endif
-}
-
-static inline __attribute_const__ __u32 __fswahb32(__u32 val)
-{
-#ifdef __arch_swahb32
-	return __arch_swahb32(val);
-#else
-	return ___constant_swahb32(val);
-#endif
-}
-
-/**
- * __swab16 - return a byteswapped 16-bit value
- * @x: value to byteswap
- */
-#define __swab16(x)				\
-	(__builtin_constant_p((__u16)(x)) ?	\
-	___constant_swab16(x) :			\
-	__fswab16(x))
-
-/**
- * __swab32 - return a byteswapped 32-bit value
- * @x: value to byteswap
- */
-#define __swab32(x)				\
-	(__builtin_constant_p((__u32)(x)) ?	\
-	___constant_swab32(x) :			\
-	__fswab32(x))
-
-/**
- * __swab64 - return a byteswapped 64-bit value
- * @x: value to byteswap
- */
-#define __swab64(x)				\
-	(__builtin_constant_p((__u64)(x)) ?	\
-	___constant_swab64(x) :			\
-	__fswab64(x))
-
-/**
- * __swahw32 - return a word-swapped 32-bit value
- * @x: value to wordswap
- *
- * __swahw32(0x12340000) is 0x00001234
- */
-#define __swahw32(x)				\
-	(__builtin_constant_p((__u32)(x)) ?	\
-	___constant_swahw32(x) :		\
-	__fswahw32(x))
-
-/**
- * __swahb32 - return a high and low byte-swapped 32-bit value
- * @x: value to byteswap
- *
- * __swahb32(0x12345678) is 0x34127856
- */
-#define __swahb32(x)				\
-	(__builtin_constant_p((__u32)(x)) ?	\
-	___constant_swahb32(x) :		\
-	__fswahb32(x))
-
-/**
- * __swab16p - return a byteswapped 16-bit value from a pointer
- * @p: pointer to a naturally-aligned 16-bit value
- */
-static inline __u16 __swab16p(const __u16 *p)
-{
-#ifdef __arch_swab16p
-	return __arch_swab16p(p);
-#else
-	return __swab16(*p);
-#endif
-}
-
-/**
- * __swab32p - return a byteswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- */
-static inline __u32 __swab32p(const __u32 *p)
-{
-#ifdef __arch_swab32p
-	return __arch_swab32p(p);
-#else
-	return __swab32(*p);
-#endif
-}
-
-/**
- * __swab64p - return a byteswapped 64-bit value from a pointer
- * @p: pointer to a naturally-aligned 64-bit value
- */
-static inline __u64 __swab64p(const __u64 *p)
-{
-#ifdef __arch_swab64p
-	return __arch_swab64p(p);
-#else
-	return __swab64(*p);
-#endif
-}
-
-/**
- * __swahw32p - return a wordswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahw32() for details of wordswapping.
- */
-static inline __u32 __swahw32p(const __u32 *p)
-{
-#ifdef __arch_swahw32p
-	return __arch_swahw32p(p);
-#else
-	return __swahw32(*p);
-#endif
-}
-
-/**
- * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahb32() for details of high/low byteswapping.
- */
-static inline __u32 __swahb32p(const __u32 *p)
-{
-#ifdef __arch_swahb32p
-	return __arch_swahb32p(p);
-#else
-	return __swahb32(*p);
-#endif
-}
-
-/**
- * __swab16s - byteswap a 16-bit value in-place
- * @p: pointer to a naturally-aligned 16-bit value
- */
-static inline void __swab16s(__u16 *p)
-{
-#ifdef __arch_swab16s
-	__arch_swab16s(p);
-#else
-	*p = __swab16p(p);
-#endif
-}
-/**
- * __swab32s - byteswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- */
-static inline void __swab32s(__u32 *p)
-{
-#ifdef __arch_swab32s
-	__arch_swab32s(p);
-#else
-	*p = __swab32p(p);
-#endif
-}
-
-/**
- * __swab64s - byteswap a 64-bit value in-place
- * @p: pointer to a naturally-aligned 64-bit value
- */
-static inline void __swab64s(__u64 *p)
-{
-#ifdef __arch_swab64s
-	__arch_swab64s(p);
-#else
-	*p = __swab64p(p);
-#endif
-}
-
-/**
- * __swahw32s - wordswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahw32() for details of wordswapping
- */
-static inline void __swahw32s(__u32 *p)
-{
-#ifdef __arch_swahw32s
-	__arch_swahw32s(p);
-#else
-	*p = __swahw32p(p);
-#endif
-}
-
-/**
- * __swahb32s - high and low byteswap a 32-bit value in-place
- * @p: pointer to a naturally-aligned 32-bit value
- *
- * See __swahb32() for details of high and low byte swapping
- */
-static inline void __swahb32s(__u32 *p)
-{
-#ifdef __arch_swahb32s
-	__arch_swahb32s(p);
-#else
-	*p = __swahb32p(p);
-#endif
-}
-
-#ifdef __KERNEL__
 # define swab16 __swab16
 # define swab32 __swab32
 # define swab64 __swab64
@@ -294,6 +18,4 @@
 # define swab64s __swab64s
 # define swahw32s __swahw32s
 # define swahb32s __swahb32s
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SWAB_H */
diff --git a/include/linux/synclink.h b/include/linux/synclink.h
index 2e7d81c..f1405b1 100644
--- a/include/linux/synclink.h
+++ b/include/linux/synclink.h
@@ -8,295 +8,11 @@
  * Redistribution of this file is permitted under
  * the terms of the GNU Public License (GPL)
  */
-
 #ifndef _SYNCLINK_H_
 #define _SYNCLINK_H_
-#define SYNCLINK_H_VERSION 3.6
 
-#include <linux/types.h>
+#include <uapi/linux/synclink.h>
 
-#define BIT0	0x0001
-#define BIT1	0x0002
-#define BIT2	0x0004
-#define BIT3	0x0008
-#define BIT4	0x0010
-#define BIT5	0x0020
-#define BIT6	0x0040
-#define BIT7	0x0080
-#define BIT8	0x0100
-#define BIT9	0x0200
-#define BIT10	0x0400
-#define BIT11	0x0800
-#define BIT12	0x1000
-#define BIT13	0x2000
-#define BIT14	0x4000
-#define BIT15	0x8000
-#define BIT16	0x00010000
-#define BIT17	0x00020000
-#define BIT18	0x00040000
-#define BIT19	0x00080000
-#define BIT20	0x00100000
-#define BIT21	0x00200000
-#define BIT22	0x00400000
-#define BIT23	0x00800000
-#define BIT24	0x01000000
-#define BIT25	0x02000000
-#define BIT26	0x04000000
-#define BIT27	0x08000000
-#define BIT28	0x10000000
-#define BIT29	0x20000000
-#define BIT30	0x40000000
-#define BIT31	0x80000000
-
-
-#define HDLC_MAX_FRAME_SIZE	65535
-#define MAX_ASYNC_TRANSMIT	4096
-#define MAX_ASYNC_BUFFER_SIZE	4096
-
-#define ASYNC_PARITY_NONE		0
-#define ASYNC_PARITY_EVEN		1
-#define ASYNC_PARITY_ODD		2
-#define ASYNC_PARITY_SPACE		3
-
-#define HDLC_FLAG_UNDERRUN_ABORT7	0x0000
-#define HDLC_FLAG_UNDERRUN_ABORT15	0x0001
-#define HDLC_FLAG_UNDERRUN_FLAG		0x0002
-#define HDLC_FLAG_UNDERRUN_CRC		0x0004
-#define HDLC_FLAG_SHARE_ZERO		0x0010
-#define HDLC_FLAG_AUTO_CTS		0x0020
-#define HDLC_FLAG_AUTO_DCD		0x0040
-#define HDLC_FLAG_AUTO_RTS		0x0080
-#define HDLC_FLAG_RXC_DPLL		0x0100
-#define HDLC_FLAG_RXC_BRG		0x0200
-#define HDLC_FLAG_RXC_TXCPIN		0x8000
-#define HDLC_FLAG_RXC_RXCPIN		0x0000
-#define HDLC_FLAG_TXC_DPLL		0x0400
-#define HDLC_FLAG_TXC_BRG		0x0800
-#define HDLC_FLAG_TXC_TXCPIN		0x0000
-#define HDLC_FLAG_TXC_RXCPIN		0x0008
-#define HDLC_FLAG_DPLL_DIV8		0x1000
-#define HDLC_FLAG_DPLL_DIV16		0x2000
-#define HDLC_FLAG_DPLL_DIV32		0x0000
-#define HDLC_FLAG_HDLC_LOOPMODE		0x4000
-
-#define HDLC_CRC_NONE			0
-#define HDLC_CRC_16_CCITT		1
-#define HDLC_CRC_32_CCITT		2
-#define HDLC_CRC_MASK			0x00ff
-#define HDLC_CRC_RETURN_EX		0x8000
-
-#define RX_OK				0
-#define RX_CRC_ERROR			1
-
-#define HDLC_TXIDLE_FLAGS		0
-#define HDLC_TXIDLE_ALT_ZEROS_ONES	1
-#define HDLC_TXIDLE_ZEROS		2
-#define HDLC_TXIDLE_ONES		3
-#define HDLC_TXIDLE_ALT_MARK_SPACE	4
-#define HDLC_TXIDLE_SPACE		5
-#define HDLC_TXIDLE_MARK		6
-#define HDLC_TXIDLE_CUSTOM_8            0x10000000
-#define HDLC_TXIDLE_CUSTOM_16           0x20000000
-
-#define HDLC_ENCODING_NRZ			0
-#define HDLC_ENCODING_NRZB			1
-#define HDLC_ENCODING_NRZI_MARK			2
-#define HDLC_ENCODING_NRZI_SPACE		3
-#define HDLC_ENCODING_NRZI			HDLC_ENCODING_NRZI_SPACE
-#define HDLC_ENCODING_BIPHASE_MARK		4
-#define HDLC_ENCODING_BIPHASE_SPACE		5
-#define HDLC_ENCODING_BIPHASE_LEVEL		6
-#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL	7
-
-#define HDLC_PREAMBLE_LENGTH_8BITS	0
-#define HDLC_PREAMBLE_LENGTH_16BITS	1
-#define HDLC_PREAMBLE_LENGTH_32BITS	2
-#define HDLC_PREAMBLE_LENGTH_64BITS	3
-
-#define HDLC_PREAMBLE_PATTERN_NONE	0
-#define HDLC_PREAMBLE_PATTERN_ZEROS	1
-#define HDLC_PREAMBLE_PATTERN_FLAGS	2
-#define HDLC_PREAMBLE_PATTERN_10	3
-#define HDLC_PREAMBLE_PATTERN_01	4
-#define HDLC_PREAMBLE_PATTERN_ONES	5
-
-#define MGSL_MODE_ASYNC		1
-#define MGSL_MODE_HDLC		2
-#define MGSL_MODE_MONOSYNC	3
-#define MGSL_MODE_BISYNC	4
-#define MGSL_MODE_RAW		6
-#define MGSL_MODE_BASE_CLOCK    7
-#define MGSL_MODE_XSYNC         8
-
-#define MGSL_BUS_TYPE_ISA	1
-#define MGSL_BUS_TYPE_EISA	2
-#define MGSL_BUS_TYPE_PCI	5
-
-#define MGSL_INTERFACE_MASK     0xf
-#define MGSL_INTERFACE_DISABLE  0
-#define MGSL_INTERFACE_RS232    1
-#define MGSL_INTERFACE_V35      2
-#define MGSL_INTERFACE_RS422    3
-#define MGSL_INTERFACE_RTS_EN   0x10
-#define MGSL_INTERFACE_LL       0x20
-#define MGSL_INTERFACE_RL       0x40
-#define MGSL_INTERFACE_MSB_FIRST 0x80
-
-typedef struct _MGSL_PARAMS
-{
-	/* Common */
-
-	unsigned long	mode;		/* Asynchronous or HDLC */
-	unsigned char	loopback;	/* internal loopback mode */
-
-	/* HDLC Only */
-
-	unsigned short	flags;
-	unsigned char	encoding;	/* NRZ, NRZI, etc. */
-	unsigned long	clock_speed;	/* external clock speed in bits per second */
-	unsigned char	addr_filter;	/* receive HDLC address filter, 0xFF = disable */
-	unsigned short	crc_type;	/* None, CRC16-CCITT, or CRC32-CCITT */
-	unsigned char	preamble_length;
-	unsigned char	preamble;
-
-	/* Async Only */
-
-	unsigned long	data_rate;	/* bits per second */
-	unsigned char	data_bits;	/* 7 or 8 data bits */
-	unsigned char	stop_bits;	/* 1 or 2 stop bits */
-	unsigned char	parity;		/* none, even, or odd */
-
-} MGSL_PARAMS, *PMGSL_PARAMS;
-
-#define MICROGATE_VENDOR_ID 0x13c0
-#define SYNCLINK_DEVICE_ID 0x0010
-#define MGSCC_DEVICE_ID 0x0020
-#define SYNCLINK_SCA_DEVICE_ID 0x0030
-#define SYNCLINK_GT_DEVICE_ID 0x0070
-#define SYNCLINK_GT4_DEVICE_ID 0x0080
-#define SYNCLINK_AC_DEVICE_ID  0x0090
-#define SYNCLINK_GT2_DEVICE_ID 0x00A0
-#define MGSL_MAX_SERIAL_NUMBER 30
-
-/*
-** device diagnostics status
-*/
-
-#define DiagStatus_OK				0
-#define DiagStatus_AddressFailure		1
-#define DiagStatus_AddressConflict		2
-#define DiagStatus_IrqFailure			3
-#define DiagStatus_IrqConflict			4
-#define DiagStatus_DmaFailure			5
-#define DiagStatus_DmaConflict			6
-#define DiagStatus_PciAdapterNotFound		7
-#define DiagStatus_CantAssignPciResources	8
-#define DiagStatus_CantAssignPciMemAddr		9
-#define DiagStatus_CantAssignPciIoAddr		10
-#define DiagStatus_CantAssignPciIrq		11
-#define DiagStatus_MemoryError			12
-
-#define SerialSignal_DCD            0x01     /* Data Carrier Detect */
-#define SerialSignal_TXD            0x02     /* Transmit Data */
-#define SerialSignal_RI             0x04     /* Ring Indicator */
-#define SerialSignal_RXD            0x08     /* Receive Data */
-#define SerialSignal_CTS            0x10     /* Clear to Send */
-#define SerialSignal_RTS            0x20     /* Request to Send */
-#define SerialSignal_DSR            0x40     /* Data Set Ready */
-#define SerialSignal_DTR            0x80     /* Data Terminal Ready */
-
-
-/*
- * Counters of the input lines (CTS, DSR, RI, CD) interrupts
- */
-struct mgsl_icount {
-	__u32	cts, dsr, rng, dcd, tx, rx;
-	__u32	frame, parity, overrun, brk;
-	__u32	buf_overrun;
-	__u32	txok;
-	__u32	txunder;
-	__u32	txabort;
-	__u32	txtimeout;
-	__u32	rxshort;
-	__u32	rxlong;
-	__u32	rxabort;
-	__u32	rxover;
-	__u32	rxcrc;
-	__u32	rxok;
-	__u32	exithunt;
-	__u32	rxidle;
-};
-
-struct gpio_desc {
-	__u32 state;
-	__u32 smask;
-	__u32 dir;
-	__u32 dmask;
-};
-
-#define DEBUG_LEVEL_DATA	1
-#define DEBUG_LEVEL_ERROR 	2
-#define DEBUG_LEVEL_INFO  	3
-#define DEBUG_LEVEL_BH    	4
-#define DEBUG_LEVEL_ISR		5
-
-/*
-** Event bit flags for use with MgslWaitEvent
-*/
-
-#define MgslEvent_DsrActive	0x0001
-#define MgslEvent_DsrInactive	0x0002
-#define MgslEvent_Dsr		0x0003
-#define MgslEvent_CtsActive	0x0004
-#define MgslEvent_CtsInactive	0x0008
-#define MgslEvent_Cts		0x000c
-#define MgslEvent_DcdActive	0x0010
-#define MgslEvent_DcdInactive	0x0020
-#define MgslEvent_Dcd		0x0030
-#define MgslEvent_RiActive	0x0040
-#define MgslEvent_RiInactive	0x0080
-#define MgslEvent_Ri		0x00c0
-#define MgslEvent_ExitHuntMode	0x0100
-#define MgslEvent_IdleReceived	0x0200
-
-/* Private IOCTL codes:
- *
- * MGSL_IOCSPARAMS	set MGSL_PARAMS structure values
- * MGSL_IOCGPARAMS	get current MGSL_PARAMS structure values
- * MGSL_IOCSTXIDLE	set current transmit idle mode
- * MGSL_IOCGTXIDLE	get current transmit idle mode
- * MGSL_IOCTXENABLE	enable or disable transmitter
- * MGSL_IOCRXENABLE	enable or disable receiver
- * MGSL_IOCTXABORT	abort transmitting frame (HDLC)
- * MGSL_IOCGSTATS	return current statistics
- * MGSL_IOCWAITEVENT	wait for specified event to occur
- * MGSL_LOOPTXDONE	transmit in HDLC LoopMode done
- * MGSL_IOCSIF          set the serial interface type
- * MGSL_IOCGIF          get the serial interface type
- */
-#define MGSL_MAGIC_IOC	'm'
-#define MGSL_IOCSPARAMS		_IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS)
-#define MGSL_IOCGPARAMS		_IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS)
-#define MGSL_IOCSTXIDLE		_IO(MGSL_MAGIC_IOC,2)
-#define MGSL_IOCGTXIDLE		_IO(MGSL_MAGIC_IOC,3)
-#define MGSL_IOCTXENABLE	_IO(MGSL_MAGIC_IOC,4)
-#define MGSL_IOCRXENABLE	_IO(MGSL_MAGIC_IOC,5)
-#define MGSL_IOCTXABORT		_IO(MGSL_MAGIC_IOC,6)
-#define MGSL_IOCGSTATS		_IO(MGSL_MAGIC_IOC,7)
-#define MGSL_IOCWAITEVENT	_IOWR(MGSL_MAGIC_IOC,8,int)
-#define MGSL_IOCCLRMODCOUNT	_IO(MGSL_MAGIC_IOC,15)
-#define MGSL_IOCLOOPTXDONE	_IO(MGSL_MAGIC_IOC,9)
-#define MGSL_IOCSIF		_IO(MGSL_MAGIC_IOC,10)
-#define MGSL_IOCGIF		_IO(MGSL_MAGIC_IOC,11)
-#define MGSL_IOCSGPIO		_IOW(MGSL_MAGIC_IOC,16,struct gpio_desc)
-#define MGSL_IOCGGPIO		_IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
-#define MGSL_IOCWAITGPIO	_IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
-#define MGSL_IOCSXSYNC		_IO(MGSL_MAGIC_IOC, 19)
-#define MGSL_IOCGXSYNC		_IO(MGSL_MAGIC_IOC, 20)
-#define MGSL_IOCSXCTRL		_IO(MGSL_MAGIC_IOC, 21)
-#define MGSL_IOCGXCTRL		_IO(MGSL_MAGIC_IOC, 22)
-
-#ifdef __KERNEL__
 /* provide 32 bit ioctl compatibility on 64 bit systems */
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
@@ -318,6 +34,4 @@
 #define MGSL_IOCSPARAMS32 _IOW(MGSL_MAGIC_IOC,0,struct MGSL_PARAMS32)
 #define MGSL_IOCGPARAMS32 _IOR(MGSL_MAGIC_IOC,1,struct MGSL_PARAMS32)
 #endif
-#endif
-
 #endif /* _SYNCLINK_H_ */
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 19439c7..727f0cd7 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -827,7 +827,15 @@
 				  const char  __user *pathname);
 asmlinkage long sys_syncfs(int fd);
 
+#ifndef CONFIG_GENERIC_KERNEL_EXECVE
 int kernel_execve(const char *filename, const char *const argv[], const char *const envp[]);
+#else
+#define kernel_execve(filename, argv, envp) \
+	do_execve(filename, \
+		(const char __user *const __user *)argv, \
+		(const char __user *const __user *)envp, \
+		current_pt_regs())
+#endif
 
 
 asmlinkage long sys_perf_event_open(
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index c34b4c8..cd844a6 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -18,921 +18,14 @@
  ****************************************************************
  ****************************************************************
  */
-
 #ifndef _LINUX_SYSCTL_H
 #define _LINUX_SYSCTL_H
 
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-struct completion;
-
-#define CTL_MAXNAME 10		/* how many path components do we allow in a
-				   call to sysctl?   In other words, what is
-				   the largest acceptable value for the nlen
-				   member of a struct __sysctl_args to have? */
-
-struct __sysctl_args {
-	int __user *name;
-	int nlen;
-	void __user *oldval;
-	size_t __user *oldlenp;
-	void __user *newval;
-	size_t newlen;
-	unsigned long __unused[4];
-};
-
-/* Define sysctl names first */
-
-/* Top-level names: */
-
-enum
-{
-	CTL_KERN=1,		/* General kernel info and control */
-	CTL_VM=2,		/* VM management */
-	CTL_NET=3,		/* Networking */
-	CTL_PROC=4,		/* removal breaks strace(1) compilation */
-	CTL_FS=5,		/* Filesystems */
-	CTL_DEBUG=6,		/* Debugging */
-	CTL_DEV=7,		/* Devices */
-	CTL_BUS=8,		/* Busses */
-	CTL_ABI=9,		/* Binary emulation */
-	CTL_CPU=10,		/* CPU stuff (speed scaling, etc) */
-	CTL_ARLAN=254,		/* arlan wireless driver */
-	CTL_S390DBF=5677,	/* s390 debug */
-	CTL_SUNRPC=7249,	/* sunrpc debug */
-	CTL_PM=9899,		/* frv power management */
-	CTL_FRV=9898,		/* frv specific sysctls */
-};
-
-/* CTL_BUS names: */
-enum
-{
-	CTL_BUS_ISA=1		/* ISA */
-};
-
-/* /proc/sys/fs/inotify/ */
-enum
-{
-	INOTIFY_MAX_USER_INSTANCES=1,	/* max instances per user */
-	INOTIFY_MAX_USER_WATCHES=2,	/* max watches per user */
-	INOTIFY_MAX_QUEUED_EVENTS=3	/* max queued events per instance */
-};
-
-/* CTL_KERN names: */
-enum
-{
-	KERN_OSTYPE=1,		/* string: system version */
-	KERN_OSRELEASE=2,	/* string: system release */
-	KERN_OSREV=3,		/* int: system revision */
-	KERN_VERSION=4,		/* string: compile time info */
-	KERN_SECUREMASK=5,	/* struct: maximum rights mask */
-	KERN_PROF=6,		/* table: profiling information */
-	KERN_NODENAME=7,	/* string: hostname */
-	KERN_DOMAINNAME=8,	/* string: domainname */
-
-	KERN_PANIC=15,		/* int: panic timeout */
-	KERN_REALROOTDEV=16,	/* real root device to mount after initrd */
-
-	KERN_SPARC_REBOOT=21,	/* reboot command on Sparc */
-	KERN_CTLALTDEL=22,	/* int: allow ctl-alt-del to reboot */
-	KERN_PRINTK=23,		/* struct: control printk logging parameters */
-	KERN_NAMETRANS=24,	/* Name translation */
-	KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
-	KERN_PPC_ZEROPAGED=26,	/* turn idle page zeroing on/off on PPC */
-	KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
-	KERN_MODPROBE=28,	/* string: modprobe path */
-	KERN_SG_BIG_BUFF=29,	/* int: sg driver reserved buffer size */
-	KERN_ACCT=30,		/* BSD process accounting parameters */
-	KERN_PPC_L2CR=31,	/* l2cr register on PPC */
-
-	KERN_RTSIGNR=32,	/* Number of rt sigs queued */
-	KERN_RTSIGMAX=33,	/* Max queuable */
-	
-	KERN_SHMMAX=34,         /* long: Maximum shared memory segment */
-	KERN_MSGMAX=35,         /* int: Maximum size of a messege */
-	KERN_MSGMNB=36,         /* int: Maximum message queue size */
-	KERN_MSGPOOL=37,        /* int: Maximum system message pool size */
-	KERN_SYSRQ=38,		/* int: Sysreq enable */
-	KERN_MAX_THREADS=39,	/* int: Maximum nr of threads in the system */
- 	KERN_RANDOM=40,		/* Random driver */
- 	KERN_SHMALL=41,		/* int: Maximum size of shared memory */
- 	KERN_MSGMNI=42,		/* int: msg queue identifiers */
- 	KERN_SEM=43,		/* struct: sysv semaphore limits */
- 	KERN_SPARC_STOP_A=44,	/* int: Sparc Stop-A enable */
- 	KERN_SHMMNI=45,		/* int: shm array identifiers */
-	KERN_OVERFLOWUID=46,	/* int: overflow UID */
-	KERN_OVERFLOWGID=47,	/* int: overflow GID */
-	KERN_SHMPATH=48,	/* string: path to shm fs */
-	KERN_HOTPLUG=49,	/* string: path to uevent helper (deprecated) */
-	KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */
-	KERN_S390_USER_DEBUG_LOGGING=51,  /* int: dumps of user faults */
-	KERN_CORE_USES_PID=52,		/* int: use core or core.%pid */
-	KERN_TAINTED=53,	/* int: various kernel tainted flags */
-	KERN_CADPID=54,		/* int: PID of the process to notify on CAD */
-	KERN_PIDMAX=55,		/* int: PID # limit */
-  	KERN_CORE_PATTERN=56,	/* string: pattern for core-file names */
-	KERN_PANIC_ON_OOPS=57,  /* int: whether we will panic on an oops */
-	KERN_HPPA_PWRSW=58,	/* int: hppa soft-power enable */
-	KERN_HPPA_UNALIGNED=59,	/* int: hppa unaligned-trap enable */
-	KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */
-	KERN_PRINTK_RATELIMIT_BURST=61,	/* int: tune printk ratelimiting */
-	KERN_PTY=62,		/* dir: pty driver */
-	KERN_NGROUPS_MAX=63,	/* int: NGROUPS_MAX */
-	KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
-	KERN_HZ_TIMER=65,	/* int: hz timer on or off */
-	KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
-	KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */
-	KERN_RANDOMIZE=68, /* int: randomize virtual address space */
-	KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
-	KERN_SPIN_RETRY=70,	/* int: number of spinlock retries */
-	KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
-	KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
-	KERN_COMPAT_LOG=73,	/* int: print compat layer  messages */
-	KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
-	KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
-	KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
-};
-
-
-
-/* CTL_VM names: */
-enum
-{
-	VM_UNUSED1=1,		/* was: struct: Set vm swapping control */
-	VM_UNUSED2=2,		/* was; int: Linear or sqrt() swapout for hogs */
-	VM_UNUSED3=3,		/* was: struct: Set free page thresholds */
-	VM_UNUSED4=4,		/* Spare */
-	VM_OVERCOMMIT_MEMORY=5,	/* Turn off the virtual memory safety limit */
-	VM_UNUSED5=6,		/* was: struct: Set buffer memory thresholds */
-	VM_UNUSED7=7,		/* was: struct: Set cache memory thresholds */
-	VM_UNUSED8=8,		/* was: struct: Control kswapd behaviour */
-	VM_UNUSED9=9,		/* was: struct: Set page table cache parameters */
-	VM_PAGE_CLUSTER=10,	/* int: set number of pages to swap together */
-	VM_DIRTY_BACKGROUND=11,	/* dirty_background_ratio */
-	VM_DIRTY_RATIO=12,	/* dirty_ratio */
-	VM_DIRTY_WB_CS=13,	/* dirty_writeback_centisecs */
-	VM_DIRTY_EXPIRE_CS=14,	/* dirty_expire_centisecs */
-	VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */
-	VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */
-	VM_PAGEBUF=17,		/* struct: Control pagebuf parameters */
-	VM_HUGETLB_PAGES=18,	/* int: Number of available Huge Pages */
-	VM_SWAPPINESS=19,	/* Tendency to steal mapped memory */
-	VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */
-	VM_MIN_FREE_KBYTES=21,	/* Minimum free kilobytes to maintain */
-	VM_MAX_MAP_COUNT=22,	/* int: Maximum number of mmaps/address-space */
-	VM_LAPTOP_MODE=23,	/* vm laptop mode */
-	VM_BLOCK_DUMP=24,	/* block dump mode */
-	VM_HUGETLB_GROUP=25,	/* permitted hugetlb group */
-	VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */
-	VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */
-	VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
-	VM_DROP_PAGECACHE=29,	/* int: nuke lots of pagecache */
-	VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */
-	VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */
-	VM_MIN_UNMAPPED=32,	/* Set min percent of unmapped pages */
-	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
-	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
-	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
-};
-
-
-/* CTL_NET names: */
-enum
-{
-	NET_CORE=1,
-	NET_ETHER=2,
-	NET_802=3,
-	NET_UNIX=4,
-	NET_IPV4=5,
-	NET_IPX=6,
-	NET_ATALK=7,
-	NET_NETROM=8,
-	NET_AX25=9,
-	NET_BRIDGE=10,
-	NET_ROSE=11,
-	NET_IPV6=12,
-	NET_X25=13,
-	NET_TR=14,
-	NET_DECNET=15,
-	NET_ECONET=16,
-	NET_SCTP=17,
-	NET_LLC=18,
-	NET_NETFILTER=19,
-	NET_DCCP=20,
-	NET_IRDA=412,
-};
-
-/* /proc/sys/kernel/random */
-enum
-{
-	RANDOM_POOLSIZE=1,
-	RANDOM_ENTROPY_COUNT=2,
-	RANDOM_READ_THRESH=3,
-	RANDOM_WRITE_THRESH=4,
-	RANDOM_BOOT_ID=5,
-	RANDOM_UUID=6
-};
-
-/* /proc/sys/kernel/pty */
-enum
-{
-	PTY_MAX=1,
-	PTY_NR=2
-};
-
-/* /proc/sys/bus/isa */
-enum
-{
-	BUS_ISA_MEM_BASE=1,
-	BUS_ISA_PORT_BASE=2,
-	BUS_ISA_PORT_SHIFT=3
-};
-
-/* /proc/sys/net/core */
-enum
-{
-	NET_CORE_WMEM_MAX=1,
-	NET_CORE_RMEM_MAX=2,
-	NET_CORE_WMEM_DEFAULT=3,
-	NET_CORE_RMEM_DEFAULT=4,
-/* was	NET_CORE_DESTROY_DELAY */
-	NET_CORE_MAX_BACKLOG=6,
-	NET_CORE_FASTROUTE=7,
-	NET_CORE_MSG_COST=8,
-	NET_CORE_MSG_BURST=9,
-	NET_CORE_OPTMEM_MAX=10,
-	NET_CORE_HOT_LIST_LENGTH=11,
-	NET_CORE_DIVERT_VERSION=12,
-	NET_CORE_NO_CONG_THRESH=13,
-	NET_CORE_NO_CONG=14,
-	NET_CORE_LO_CONG=15,
-	NET_CORE_MOD_CONG=16,
-	NET_CORE_DEV_WEIGHT=17,
-	NET_CORE_SOMAXCONN=18,
-	NET_CORE_BUDGET=19,
-	NET_CORE_AEVENT_ETIME=20,
-	NET_CORE_AEVENT_RSEQTH=21,
-	NET_CORE_WARNINGS=22,
-};
-
-/* /proc/sys/net/ethernet */
-
-/* /proc/sys/net/802 */
-
-/* /proc/sys/net/unix */
-
-enum
-{
-	NET_UNIX_DESTROY_DELAY=1,
-	NET_UNIX_DELETE_DELAY=2,
-	NET_UNIX_MAX_DGRAM_QLEN=3,
-};
-
-/* /proc/sys/net/netfilter */
-enum
-{
-	NET_NF_CONNTRACK_MAX=1,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
-	NET_NF_CONNTRACK_UDP_TIMEOUT=10,
-	NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
-	NET_NF_CONNTRACK_ICMP_TIMEOUT=12,
-	NET_NF_CONNTRACK_GENERIC_TIMEOUT=13,
-	NET_NF_CONNTRACK_BUCKETS=14,
-	NET_NF_CONNTRACK_LOG_INVALID=15,
-	NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
-	NET_NF_CONNTRACK_TCP_LOOSE=17,
-	NET_NF_CONNTRACK_TCP_BE_LIBERAL=18,
-	NET_NF_CONNTRACK_TCP_MAX_RETRANS=19,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
-	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
-	NET_NF_CONNTRACK_COUNT=27,
-	NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28,
-	NET_NF_CONNTRACK_FRAG6_TIMEOUT=29,
-	NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30,
-	NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31,
-	NET_NF_CONNTRACK_CHECKSUM=32,
-};
-
-/* /proc/sys/net/ipv4 */
-enum
-{
-	/* v2.0 compatibile variables */
-	NET_IPV4_FORWARD=8,
-	NET_IPV4_DYNADDR=9,
-
-	NET_IPV4_CONF=16,
-	NET_IPV4_NEIGH=17,
-	NET_IPV4_ROUTE=18,
-	NET_IPV4_FIB_HASH=19,
-	NET_IPV4_NETFILTER=20,
-
-	NET_IPV4_TCP_TIMESTAMPS=33,
-	NET_IPV4_TCP_WINDOW_SCALING=34,
-	NET_IPV4_TCP_SACK=35,
-	NET_IPV4_TCP_RETRANS_COLLAPSE=36,
-	NET_IPV4_DEFAULT_TTL=37,
-	NET_IPV4_AUTOCONFIG=38,
-	NET_IPV4_NO_PMTU_DISC=39,
-	NET_IPV4_TCP_SYN_RETRIES=40,
-	NET_IPV4_IPFRAG_HIGH_THRESH=41,
-	NET_IPV4_IPFRAG_LOW_THRESH=42,
-	NET_IPV4_IPFRAG_TIME=43,
-	NET_IPV4_TCP_MAX_KA_PROBES=44,
-	NET_IPV4_TCP_KEEPALIVE_TIME=45,
-	NET_IPV4_TCP_KEEPALIVE_PROBES=46,
-	NET_IPV4_TCP_RETRIES1=47,
-	NET_IPV4_TCP_RETRIES2=48,
-	NET_IPV4_TCP_FIN_TIMEOUT=49,
-	NET_IPV4_IP_MASQ_DEBUG=50,
-	NET_TCP_SYNCOOKIES=51,
-	NET_TCP_STDURG=52,
-	NET_TCP_RFC1337=53,
-	NET_TCP_SYN_TAILDROP=54,
-	NET_TCP_MAX_SYN_BACKLOG=55,
-	NET_IPV4_LOCAL_PORT_RANGE=56,
-	NET_IPV4_ICMP_ECHO_IGNORE_ALL=57,
-	NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58,
-	NET_IPV4_ICMP_SOURCEQUENCH_RATE=59,
-	NET_IPV4_ICMP_DESTUNREACH_RATE=60,
-	NET_IPV4_ICMP_TIMEEXCEED_RATE=61,
-	NET_IPV4_ICMP_PARAMPROB_RATE=62,
-	NET_IPV4_ICMP_ECHOREPLY_RATE=63,
-	NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64,
-	NET_IPV4_IGMP_MAX_MEMBERSHIPS=65,
-	NET_TCP_TW_RECYCLE=66,
-	NET_IPV4_ALWAYS_DEFRAG=67,
-	NET_IPV4_TCP_KEEPALIVE_INTVL=68,
-	NET_IPV4_INET_PEER_THRESHOLD=69,
-	NET_IPV4_INET_PEER_MINTTL=70,
-	NET_IPV4_INET_PEER_MAXTTL=71,
-	NET_IPV4_INET_PEER_GC_MINTIME=72,
-	NET_IPV4_INET_PEER_GC_MAXTIME=73,
-	NET_TCP_ORPHAN_RETRIES=74,
-	NET_TCP_ABORT_ON_OVERFLOW=75,
-	NET_TCP_SYNACK_RETRIES=76,
-	NET_TCP_MAX_ORPHANS=77,
-	NET_TCP_MAX_TW_BUCKETS=78,
-	NET_TCP_FACK=79,
-	NET_TCP_REORDERING=80,
-	NET_TCP_ECN=81,
-	NET_TCP_DSACK=82,
-	NET_TCP_MEM=83,
-	NET_TCP_WMEM=84,
-	NET_TCP_RMEM=85,
-	NET_TCP_APP_WIN=86,
-	NET_TCP_ADV_WIN_SCALE=87,
-	NET_IPV4_NONLOCAL_BIND=88,
-	NET_IPV4_ICMP_RATELIMIT=89,
-	NET_IPV4_ICMP_RATEMASK=90,
-	NET_TCP_TW_REUSE=91,
-	NET_TCP_FRTO=92,
-	NET_TCP_LOW_LATENCY=93,
-	NET_IPV4_IPFRAG_SECRET_INTERVAL=94,
-	NET_IPV4_IGMP_MAX_MSF=96,
-	NET_TCP_NO_METRICS_SAVE=97,
-	NET_TCP_DEFAULT_WIN_SCALE=105,
-	NET_TCP_MODERATE_RCVBUF=106,
-	NET_TCP_TSO_WIN_DIVISOR=107,
-	NET_TCP_BIC_BETA=108,
-	NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109,
-	NET_TCP_CONG_CONTROL=110,
-	NET_TCP_ABC=111,
-	NET_IPV4_IPFRAG_MAX_DIST=112,
- 	NET_TCP_MTU_PROBING=113,
-	NET_TCP_BASE_MSS=114,
-	NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115,
-	NET_TCP_DMA_COPYBREAK=116,
-	NET_TCP_SLOW_START_AFTER_IDLE=117,
-	NET_CIPSOV4_CACHE_ENABLE=118,
-	NET_CIPSOV4_CACHE_BUCKET_SIZE=119,
-	NET_CIPSOV4_RBM_OPTFMT=120,
-	NET_CIPSOV4_RBM_STRICTVALID=121,
-	NET_TCP_AVAIL_CONG_CONTROL=122,
-	NET_TCP_ALLOWED_CONG_CONTROL=123,
-	NET_TCP_MAX_SSTHRESH=124,
-	NET_TCP_FRTO_RESPONSE=125,
-};
-
-enum {
-	NET_IPV4_ROUTE_FLUSH=1,
-	NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */
-	NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */
-	NET_IPV4_ROUTE_GC_THRESH=4,
-	NET_IPV4_ROUTE_MAX_SIZE=5,
-	NET_IPV4_ROUTE_GC_MIN_INTERVAL=6,
-	NET_IPV4_ROUTE_GC_TIMEOUT=7,
-	NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */
-	NET_IPV4_ROUTE_REDIRECT_LOAD=9,
-	NET_IPV4_ROUTE_REDIRECT_NUMBER=10,
-	NET_IPV4_ROUTE_REDIRECT_SILENCE=11,
-	NET_IPV4_ROUTE_ERROR_COST=12,
-	NET_IPV4_ROUTE_ERROR_BURST=13,
-	NET_IPV4_ROUTE_GC_ELASTICITY=14,
-	NET_IPV4_ROUTE_MTU_EXPIRES=15,
-	NET_IPV4_ROUTE_MIN_PMTU=16,
-	NET_IPV4_ROUTE_MIN_ADVMSS=17,
-	NET_IPV4_ROUTE_SECRET_INTERVAL=18,
-	NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19,
-};
-
-enum
-{
-	NET_PROTO_CONF_ALL=-2,
-	NET_PROTO_CONF_DEFAULT=-3
-
-	/* And device ifindices ... */
-};
-
-enum
-{
-	NET_IPV4_CONF_FORWARDING=1,
-	NET_IPV4_CONF_MC_FORWARDING=2,
-	NET_IPV4_CONF_PROXY_ARP=3,
-	NET_IPV4_CONF_ACCEPT_REDIRECTS=4,
-	NET_IPV4_CONF_SECURE_REDIRECTS=5,
-	NET_IPV4_CONF_SEND_REDIRECTS=6,
-	NET_IPV4_CONF_SHARED_MEDIA=7,
-	NET_IPV4_CONF_RP_FILTER=8,
-	NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9,
-	NET_IPV4_CONF_BOOTP_RELAY=10,
-	NET_IPV4_CONF_LOG_MARTIANS=11,
-	NET_IPV4_CONF_TAG=12,
-	NET_IPV4_CONF_ARPFILTER=13,
-	NET_IPV4_CONF_MEDIUM_ID=14,
-	NET_IPV4_CONF_NOXFRM=15,
-	NET_IPV4_CONF_NOPOLICY=16,
-	NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
-	NET_IPV4_CONF_ARP_ANNOUNCE=18,
-	NET_IPV4_CONF_ARP_IGNORE=19,
-	NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
-	NET_IPV4_CONF_ARP_ACCEPT=21,
-	NET_IPV4_CONF_ARP_NOTIFY=22,
-};
-
-/* /proc/sys/net/ipv4/netfilter */
-enum
-{
-	NET_IPV4_NF_CONNTRACK_MAX=1,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
-	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10,
-	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
-	NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12,
-	NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13,
-	NET_IPV4_NF_CONNTRACK_BUCKETS=14,
-	NET_IPV4_NF_CONNTRACK_LOG_INVALID=15,
-	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
-	NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17,
-	NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18,
-	NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
- 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
-	NET_IPV4_NF_CONNTRACK_COUNT=27,
-	NET_IPV4_NF_CONNTRACK_CHECKSUM=28,
-};
- 
-/* /proc/sys/net/ipv6 */
-enum {
-	NET_IPV6_CONF=16,
-	NET_IPV6_NEIGH=17,
-	NET_IPV6_ROUTE=18,
-	NET_IPV6_ICMP=19,
-	NET_IPV6_BINDV6ONLY=20,
-	NET_IPV6_IP6FRAG_HIGH_THRESH=21,
-	NET_IPV6_IP6FRAG_LOW_THRESH=22,
-	NET_IPV6_IP6FRAG_TIME=23,
-	NET_IPV6_IP6FRAG_SECRET_INTERVAL=24,
-	NET_IPV6_MLD_MAX_MSF=25,
-};
-
-enum {
-	NET_IPV6_ROUTE_FLUSH=1,
-	NET_IPV6_ROUTE_GC_THRESH=2,
-	NET_IPV6_ROUTE_MAX_SIZE=3,
-	NET_IPV6_ROUTE_GC_MIN_INTERVAL=4,
-	NET_IPV6_ROUTE_GC_TIMEOUT=5,
-	NET_IPV6_ROUTE_GC_INTERVAL=6,
-	NET_IPV6_ROUTE_GC_ELASTICITY=7,
-	NET_IPV6_ROUTE_MTU_EXPIRES=8,
-	NET_IPV6_ROUTE_MIN_ADVMSS=9,
-	NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10
-};
-
-enum {
-	NET_IPV6_FORWARDING=1,
-	NET_IPV6_HOP_LIMIT=2,
-	NET_IPV6_MTU=3,
-	NET_IPV6_ACCEPT_RA=4,
-	NET_IPV6_ACCEPT_REDIRECTS=5,
-	NET_IPV6_AUTOCONF=6,
-	NET_IPV6_DAD_TRANSMITS=7,
-	NET_IPV6_RTR_SOLICITS=8,
-	NET_IPV6_RTR_SOLICIT_INTERVAL=9,
-	NET_IPV6_RTR_SOLICIT_DELAY=10,
-	NET_IPV6_USE_TEMPADDR=11,
-	NET_IPV6_TEMP_VALID_LFT=12,
-	NET_IPV6_TEMP_PREFERED_LFT=13,
-	NET_IPV6_REGEN_MAX_RETRY=14,
-	NET_IPV6_MAX_DESYNC_FACTOR=15,
-	NET_IPV6_MAX_ADDRESSES=16,
-	NET_IPV6_FORCE_MLD_VERSION=17,
-	NET_IPV6_ACCEPT_RA_DEFRTR=18,
-	NET_IPV6_ACCEPT_RA_PINFO=19,
-	NET_IPV6_ACCEPT_RA_RTR_PREF=20,
-	NET_IPV6_RTR_PROBE_INTERVAL=21,
-	NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22,
-	NET_IPV6_PROXY_NDP=23,
-	NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
-	__NET_IPV6_MAX
-};
-
-/* /proc/sys/net/ipv6/icmp */
-enum {
-	NET_IPV6_ICMP_RATELIMIT=1
-};
-
-/* /proc/sys/net/<protocol>/neigh/<dev> */
-enum {
-	NET_NEIGH_MCAST_SOLICIT=1,
-	NET_NEIGH_UCAST_SOLICIT=2,
-	NET_NEIGH_APP_SOLICIT=3,
-	NET_NEIGH_RETRANS_TIME=4,
-	NET_NEIGH_REACHABLE_TIME=5,
-	NET_NEIGH_DELAY_PROBE_TIME=6,
-	NET_NEIGH_GC_STALE_TIME=7,
-	NET_NEIGH_UNRES_QLEN=8,
-	NET_NEIGH_PROXY_QLEN=9,
-	NET_NEIGH_ANYCAST_DELAY=10,
-	NET_NEIGH_PROXY_DELAY=11,
-	NET_NEIGH_LOCKTIME=12,
-	NET_NEIGH_GC_INTERVAL=13,
-	NET_NEIGH_GC_THRESH1=14,
-	NET_NEIGH_GC_THRESH2=15,
-	NET_NEIGH_GC_THRESH3=16,
-	NET_NEIGH_RETRANS_TIME_MS=17,
-	NET_NEIGH_REACHABLE_TIME_MS=18,
-};
-
-/* /proc/sys/net/dccp */
-enum {
-	NET_DCCP_DEFAULT=1,
-};
-
-/* /proc/sys/net/ipx */
-enum {
-	NET_IPX_PPROP_BROADCASTING=1,
-	NET_IPX_FORWARDING=2
-};
-
-/* /proc/sys/net/llc */
-enum {
-	NET_LLC2=1,
-	NET_LLC_STATION=2,
-};
-
-/* /proc/sys/net/llc/llc2 */
-enum {
-	NET_LLC2_TIMEOUT=1,
-};
-
-/* /proc/sys/net/llc/station */
-enum {
-	NET_LLC_STATION_ACK_TIMEOUT=1,
-};
-
-/* /proc/sys/net/llc/llc2/timeout */
-enum {
-	NET_LLC2_ACK_TIMEOUT=1,
-	NET_LLC2_P_TIMEOUT=2,
-	NET_LLC2_REJ_TIMEOUT=3,
-	NET_LLC2_BUSY_TIMEOUT=4,
-};
-
-/* /proc/sys/net/appletalk */
-enum {
-	NET_ATALK_AARP_EXPIRY_TIME=1,
-	NET_ATALK_AARP_TICK_TIME=2,
-	NET_ATALK_AARP_RETRANSMIT_LIMIT=3,
-	NET_ATALK_AARP_RESOLVE_TIME=4
-};
-
-
-/* /proc/sys/net/netrom */
-enum {
-	NET_NETROM_DEFAULT_PATH_QUALITY=1,
-	NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2,
-	NET_NETROM_NETWORK_TTL_INITIALISER=3,
-	NET_NETROM_TRANSPORT_TIMEOUT=4,
-	NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5,
-	NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6,
-	NET_NETROM_TRANSPORT_BUSY_DELAY=7,
-	NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8,
-	NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9,
-	NET_NETROM_ROUTING_CONTROL=10,
-	NET_NETROM_LINK_FAILS_COUNT=11,
-	NET_NETROM_RESET=12
-};
-
-/* /proc/sys/net/ax25 */
-enum {
-	NET_AX25_IP_DEFAULT_MODE=1,
-	NET_AX25_DEFAULT_MODE=2,
-	NET_AX25_BACKOFF_TYPE=3,
-	NET_AX25_CONNECT_MODE=4,
-	NET_AX25_STANDARD_WINDOW=5,
-	NET_AX25_EXTENDED_WINDOW=6,
-	NET_AX25_T1_TIMEOUT=7,
-	NET_AX25_T2_TIMEOUT=8,
-	NET_AX25_T3_TIMEOUT=9,
-	NET_AX25_IDLE_TIMEOUT=10,
-	NET_AX25_N2=11,
-	NET_AX25_PACLEN=12,
-	NET_AX25_PROTOCOL=13,
-	NET_AX25_DAMA_SLAVE_TIMEOUT=14
-};
-
-/* /proc/sys/net/rose */
-enum {
-	NET_ROSE_RESTART_REQUEST_TIMEOUT=1,
-	NET_ROSE_CALL_REQUEST_TIMEOUT=2,
-	NET_ROSE_RESET_REQUEST_TIMEOUT=3,
-	NET_ROSE_CLEAR_REQUEST_TIMEOUT=4,
-	NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5,
-	NET_ROSE_ROUTING_CONTROL=6,
-	NET_ROSE_LINK_FAIL_TIMEOUT=7,
-	NET_ROSE_MAX_VCS=8,
-	NET_ROSE_WINDOW_SIZE=9,
-	NET_ROSE_NO_ACTIVITY_TIMEOUT=10
-};
-
-/* /proc/sys/net/x25 */
-enum {
-	NET_X25_RESTART_REQUEST_TIMEOUT=1,
-	NET_X25_CALL_REQUEST_TIMEOUT=2,
-	NET_X25_RESET_REQUEST_TIMEOUT=3,
-	NET_X25_CLEAR_REQUEST_TIMEOUT=4,
-	NET_X25_ACK_HOLD_BACK_TIMEOUT=5,
-	NET_X25_FORWARD=6
-};
-
-/* /proc/sys/net/token-ring */
-enum
-{
-	NET_TR_RIF_TIMEOUT=1
-};
-
-/* /proc/sys/net/decnet/ */
-enum {
-	NET_DECNET_NODE_TYPE = 1,
-	NET_DECNET_NODE_ADDRESS = 2,
-	NET_DECNET_NODE_NAME = 3,
-	NET_DECNET_DEFAULT_DEVICE = 4,
-	NET_DECNET_TIME_WAIT = 5,
-	NET_DECNET_DN_COUNT = 6,
-	NET_DECNET_DI_COUNT = 7,
-	NET_DECNET_DR_COUNT = 8,
-	NET_DECNET_DST_GC_INTERVAL = 9,
-	NET_DECNET_CONF = 10,
-	NET_DECNET_NO_FC_MAX_CWND = 11,
-	NET_DECNET_MEM = 12,
-	NET_DECNET_RMEM = 13,
-	NET_DECNET_WMEM = 14,
-	NET_DECNET_DEBUG_LEVEL = 255
-};
-
-/* /proc/sys/net/decnet/conf/<dev> */
-enum {
-	NET_DECNET_CONF_LOOPBACK = -2,
-	NET_DECNET_CONF_DDCMP = -3,
-	NET_DECNET_CONF_PPP = -4,
-	NET_DECNET_CONF_X25 = -5,
-	NET_DECNET_CONF_GRE = -6,
-	NET_DECNET_CONF_ETHER = -7
-
-	/* ... and ifindex of devices */
-};
-
-/* /proc/sys/net/decnet/conf/<dev>/ */
-enum {
-	NET_DECNET_CONF_DEV_PRIORITY = 1,
-	NET_DECNET_CONF_DEV_T1 = 2,
-	NET_DECNET_CONF_DEV_T2 = 3,
-	NET_DECNET_CONF_DEV_T3 = 4,
-	NET_DECNET_CONF_DEV_FORWARDING = 5,
-	NET_DECNET_CONF_DEV_BLKSIZE = 6,
-	NET_DECNET_CONF_DEV_STATE = 7
-};
-
-/* /proc/sys/net/sctp */
-enum {
-	NET_SCTP_RTO_INITIAL = 1,
-	NET_SCTP_RTO_MIN     = 2,
-	NET_SCTP_RTO_MAX     = 3,
-	NET_SCTP_RTO_ALPHA   = 4,
-	NET_SCTP_RTO_BETA    = 5,
-	NET_SCTP_VALID_COOKIE_LIFE       =  6,
-	NET_SCTP_ASSOCIATION_MAX_RETRANS =  7,
-	NET_SCTP_PATH_MAX_RETRANS        =  8,
-	NET_SCTP_MAX_INIT_RETRANSMITS    =  9,
-	NET_SCTP_HB_INTERVAL             = 10,
-	NET_SCTP_PRESERVE_ENABLE         = 11,
-	NET_SCTP_MAX_BURST               = 12,
-	NET_SCTP_ADDIP_ENABLE		 = 13,
-	NET_SCTP_PRSCTP_ENABLE		 = 14,
-	NET_SCTP_SNDBUF_POLICY		 = 15,
-	NET_SCTP_SACK_TIMEOUT		 = 16,
-	NET_SCTP_RCVBUF_POLICY		 = 17,
-};
-
-/* /proc/sys/net/bridge */
-enum {
-	NET_BRIDGE_NF_CALL_ARPTABLES = 1,
-	NET_BRIDGE_NF_CALL_IPTABLES = 2,
-	NET_BRIDGE_NF_CALL_IP6TABLES = 3,
-	NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4,
-	NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5,
-};
-
-/* proc/sys/net/irda */
-enum {
-	NET_IRDA_DISCOVERY=1,
-	NET_IRDA_DEVNAME=2,
-	NET_IRDA_DEBUG=3,
-	NET_IRDA_FAST_POLL=4,
-	NET_IRDA_DISCOVERY_SLOTS=5,
-	NET_IRDA_DISCOVERY_TIMEOUT=6,
-	NET_IRDA_SLOT_TIMEOUT=7,
-	NET_IRDA_MAX_BAUD_RATE=8,
-	NET_IRDA_MIN_TX_TURN_TIME=9,
-	NET_IRDA_MAX_TX_DATA_SIZE=10,
-	NET_IRDA_MAX_TX_WINDOW=11,
-	NET_IRDA_MAX_NOREPLY_TIME=12,
-	NET_IRDA_WARN_NOREPLY_TIME=13,
-	NET_IRDA_LAP_KEEPALIVE_TIME=14,
-};
-
-
-/* CTL_FS names: */
-enum
-{
-	FS_NRINODE=1,	/* int:current number of allocated inodes */
-	FS_STATINODE=2,
-	FS_MAXINODE=3,	/* int:maximum number of inodes that can be allocated */
-	FS_NRDQUOT=4,	/* int:current number of allocated dquots */
-	FS_MAXDQUOT=5,	/* int:maximum number of dquots that can be allocated */
-	FS_NRFILE=6,	/* int:current number of allocated filedescriptors */
-	FS_MAXFILE=7,	/* int:maximum number of filedescriptors that can be allocated */
-	FS_DENTRY=8,
-	FS_NRSUPER=9,	/* int:current number of allocated super_blocks */
-	FS_MAXSUPER=10,	/* int:maximum number of super_blocks that can be allocated */
-	FS_OVERFLOWUID=11,	/* int: overflow UID */
-	FS_OVERFLOWGID=12,	/* int: overflow GID */
-	FS_LEASES=13,	/* int: leases enabled */
-	FS_DIR_NOTIFY=14,	/* int: directory notification enabled */
-	FS_LEASE_TIME=15,	/* int: maximum time to wait for a lease break */
-	FS_DQSTATS=16,	/* disc quota usage statistics and control */
-	FS_XFS=17,	/* struct: control xfs parameters */
-	FS_AIO_NR=18,	/* current system-wide number of aio requests */
-	FS_AIO_MAX_NR=19,	/* system-wide maximum number of aio requests */
-	FS_INOTIFY=20,	/* inotify submenu */
-	FS_OCFS2=988,	/* ocfs2 */
-};
-
-/* /proc/sys/fs/quota/ */
-enum {
-	FS_DQ_LOOKUPS = 1,
-	FS_DQ_DROPS = 2,
-	FS_DQ_READS = 3,
-	FS_DQ_WRITES = 4,
-	FS_DQ_CACHE_HITS = 5,
-	FS_DQ_ALLOCATED = 6,
-	FS_DQ_FREE = 7,
-	FS_DQ_SYNCS = 8,
-	FS_DQ_WARNINGS = 9,
-};
-
-/* CTL_DEBUG names: */
-
-/* CTL_DEV names: */
-enum {
-	DEV_CDROM=1,
-	DEV_HWMON=2,
-	DEV_PARPORT=3,
-	DEV_RAID=4,
-	DEV_MAC_HID=5,
-	DEV_SCSI=6,
-	DEV_IPMI=7,
-};
-
-/* /proc/sys/dev/cdrom */
-enum {
-	DEV_CDROM_INFO=1,
-	DEV_CDROM_AUTOCLOSE=2,
-	DEV_CDROM_AUTOEJECT=3,
-	DEV_CDROM_DEBUG=4,
-	DEV_CDROM_LOCK=5,
-	DEV_CDROM_CHECK_MEDIA=6
-};
-
-/* /proc/sys/dev/parport */
-enum {
-	DEV_PARPORT_DEFAULT=-3
-};
-
-/* /proc/sys/dev/raid */
-enum {
-	DEV_RAID_SPEED_LIMIT_MIN=1,
-	DEV_RAID_SPEED_LIMIT_MAX=2
-};
-
-/* /proc/sys/dev/parport/default */
-enum {
-	DEV_PARPORT_DEFAULT_TIMESLICE=1,
-	DEV_PARPORT_DEFAULT_SPINTIME=2
-};
-
-/* /proc/sys/dev/parport/parport n */
-enum {
-	DEV_PARPORT_SPINTIME=1,
-	DEV_PARPORT_BASE_ADDR=2,
-	DEV_PARPORT_IRQ=3,
-	DEV_PARPORT_DMA=4,
-	DEV_PARPORT_MODES=5,
-	DEV_PARPORT_DEVICES=6,
-	DEV_PARPORT_AUTOPROBE=16
-};
-
-/* /proc/sys/dev/parport/parport n/devices/ */
-enum {
-	DEV_PARPORT_DEVICES_ACTIVE=-3,
-};
-
-/* /proc/sys/dev/parport/parport n/devices/device n */
-enum {
-	DEV_PARPORT_DEVICE_TIMESLICE=1,
-};
-
-/* /proc/sys/dev/mac_hid */
-enum {
-	DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1,
-	DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2,
-	DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3,
-	DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4,
-	DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5,
-	DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6
-};
-
-/* /proc/sys/dev/scsi */
-enum {
-	DEV_SCSI_LOGGING_LEVEL=1,
-};
-
-/* /proc/sys/dev/ipmi */
-enum {
-	DEV_IPMI_POWEROFF_POWERCYCLE=1,
-};
-
-/* /proc/sys/abi */
-enum
-{
-	ABI_DEFHANDLER_COFF=1,	/* default handler for coff binaries */
-	ABI_DEFHANDLER_ELF=2, 	/* default handler for ELF binaries */
-	ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */
-	ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */
-	ABI_TRACE=5,		/* tracing flags */
-	ABI_FAKE_UTSNAME=6,	/* fake target utsname information */
-};
-
-#ifdef __KERNEL__
 #include <linux/list.h>
 #include <linux/rcupdate.h>
 #include <linux/wait.h>
 #include <linux/rbtree.h>
+#include <uapi/linux/sysctl.h>
 
 /* For the /proc/sys support */
 struct ctl_table;
@@ -1122,6 +215,4 @@
 
 #endif /* CONFIG_SYSCTL */
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_SYSCTL_H */
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 67c789a..8a7fc4b 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -17,217 +17,13 @@
 #ifndef _LINUX_TCP_H
 #define _LINUX_TCP_H
 
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/socket.h>
-
-struct tcphdr {
-	__be16	source;
-	__be16	dest;
-	__be32	seq;
-	__be32	ack_seq;
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u16	res1:4,
-		doff:4,
-		fin:1,
-		syn:1,
-		rst:1,
-		psh:1,
-		ack:1,
-		urg:1,
-		ece:1,
-		cwr:1;
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u16	doff:4,
-		res1:4,
-		cwr:1,
-		ece:1,
-		urg:1,
-		ack:1,
-		psh:1,
-		rst:1,
-		syn:1,
-		fin:1;
-#else
-#error	"Adjust your <asm/byteorder.h> defines"
-#endif	
-	__be16	window;
-	__sum16	check;
-	__be16	urg_ptr;
-};
-
-/*
- *	The union cast uses a gcc extension to avoid aliasing problems
- *  (union is compatible to any of its members)
- *  This means this part of the code is -fstrict-aliasing safe now.
- */
-union tcp_word_hdr { 
-	struct tcphdr hdr;
-	__be32 		  words[5];
-}; 
-
-#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
-
-enum { 
-	TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
-	TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
-	TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
-	TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000),
-	TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000),
-	TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000),
-	TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000),
-	TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
-	TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
-	TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
-}; 
-
-/*
- * TCP general constants
- */
-#define TCP_MSS_DEFAULT		 536U	/* IPv4 (RFC1122, RFC2581) */
-#define TCP_MSS_DESIRED		1220U	/* IPv6 (tunneled), EDNS0 (RFC3226) */
-
-/* TCP socket options */
-#define TCP_NODELAY		1	/* Turn off Nagle's algorithm. */
-#define TCP_MAXSEG		2	/* Limit MSS */
-#define TCP_CORK		3	/* Never send partially complete segments */
-#define TCP_KEEPIDLE		4	/* Start keeplives after this period */
-#define TCP_KEEPINTVL		5	/* Interval between keepalives */
-#define TCP_KEEPCNT		6	/* Number of keepalives before death */
-#define TCP_SYNCNT		7	/* Number of SYN retransmits */
-#define TCP_LINGER2		8	/* Life time of orphaned FIN-WAIT-2 state */
-#define TCP_DEFER_ACCEPT	9	/* Wake up listener only when data arrive */
-#define TCP_WINDOW_CLAMP	10	/* Bound advertised window */
-#define TCP_INFO		11	/* Information about this connection. */
-#define TCP_QUICKACK		12	/* Block/reenable quick acks */
-#define TCP_CONGESTION		13	/* Congestion control algorithm */
-#define TCP_MD5SIG		14	/* TCP MD5 Signature (RFC2385) */
-#define TCP_COOKIE_TRANSACTIONS	15	/* TCP Cookie Transactions */
-#define TCP_THIN_LINEAR_TIMEOUTS 16      /* Use linear timeouts for thin streams*/
-#define TCP_THIN_DUPACK         17      /* Fast retrans. after 1 dupack */
-#define TCP_USER_TIMEOUT	18	/* How long for loss retry before timeout */
-#define TCP_REPAIR		19	/* TCP sock is under repair right now */
-#define TCP_REPAIR_QUEUE	20
-#define TCP_QUEUE_SEQ		21
-#define TCP_REPAIR_OPTIONS	22
-#define TCP_FASTOPEN		23	/* Enable FastOpen on listeners */
-
-struct tcp_repair_opt {
-	__u32	opt_code;
-	__u32	opt_val;
-};
-
-enum {
-	TCP_NO_QUEUE,
-	TCP_RECV_QUEUE,
-	TCP_SEND_QUEUE,
-	TCP_QUEUES_NR,
-};
-
-/* for TCP_INFO socket option */
-#define TCPI_OPT_TIMESTAMPS	1
-#define TCPI_OPT_SACK		2
-#define TCPI_OPT_WSCALE		4
-#define TCPI_OPT_ECN		8 /* ECN was negociated at TCP session init */
-#define TCPI_OPT_ECN_SEEN	16 /* we received at least one packet with ECT */
-
-enum tcp_ca_state {
-	TCP_CA_Open = 0,
-#define TCPF_CA_Open	(1<<TCP_CA_Open)
-	TCP_CA_Disorder = 1,
-#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
-	TCP_CA_CWR = 2,
-#define TCPF_CA_CWR	(1<<TCP_CA_CWR)
-	TCP_CA_Recovery = 3,
-#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
-	TCP_CA_Loss = 4
-#define TCPF_CA_Loss	(1<<TCP_CA_Loss)
-};
-
-struct tcp_info {
-	__u8	tcpi_state;
-	__u8	tcpi_ca_state;
-	__u8	tcpi_retransmits;
-	__u8	tcpi_probes;
-	__u8	tcpi_backoff;
-	__u8	tcpi_options;
-	__u8	tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4;
-
-	__u32	tcpi_rto;
-	__u32	tcpi_ato;
-	__u32	tcpi_snd_mss;
-	__u32	tcpi_rcv_mss;
-
-	__u32	tcpi_unacked;
-	__u32	tcpi_sacked;
-	__u32	tcpi_lost;
-	__u32	tcpi_retrans;
-	__u32	tcpi_fackets;
-
-	/* Times. */
-	__u32	tcpi_last_data_sent;
-	__u32	tcpi_last_ack_sent;     /* Not remembered, sorry. */
-	__u32	tcpi_last_data_recv;
-	__u32	tcpi_last_ack_recv;
-
-	/* Metrics. */
-	__u32	tcpi_pmtu;
-	__u32	tcpi_rcv_ssthresh;
-	__u32	tcpi_rtt;
-	__u32	tcpi_rttvar;
-	__u32	tcpi_snd_ssthresh;
-	__u32	tcpi_snd_cwnd;
-	__u32	tcpi_advmss;
-	__u32	tcpi_reordering;
-
-	__u32	tcpi_rcv_rtt;
-	__u32	tcpi_rcv_space;
-
-	__u32	tcpi_total_retrans;
-};
-
-/* for TCP_MD5SIG socket option */
-#define TCP_MD5SIG_MAXKEYLEN	80
-
-struct tcp_md5sig {
-	struct __kernel_sockaddr_storage tcpm_addr;	/* address associated */
-	__u16	__tcpm_pad1;				/* zero */
-	__u16	tcpm_keylen;				/* key length */
-	__u32	__tcpm_pad2;				/* zero */
-	__u8	tcpm_key[TCP_MD5SIG_MAXKEYLEN];		/* key (binary) */
-};
-
-/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
-#define TCP_COOKIE_MIN		 8		/*  64-bits */
-#define TCP_COOKIE_MAX		16		/* 128-bits */
-#define TCP_COOKIE_PAIR_SIZE	(2*TCP_COOKIE_MAX)
-
-/* Flags for both getsockopt and setsockopt */
-#define TCP_COOKIE_IN_ALWAYS	(1 << 0)	/* Discard SYN without cookie */
-#define TCP_COOKIE_OUT_NEVER	(1 << 1)	/* Prohibit outgoing cookies,
-						 * supercedes everything. */
-
-/* Flags for getsockopt */
-#define TCP_S_DATA_IN		(1 << 2)	/* Was data received? */
-#define TCP_S_DATA_OUT		(1 << 3)	/* Was data sent? */
-
-/* TCP_COOKIE_TRANSACTIONS data */
-struct tcp_cookie_transactions {
-	__u16	tcpct_flags;			/* see above */
-	__u8	__tcpct_pad1;			/* zero */
-	__u8	tcpct_cookie_desired;		/* bytes */
-	__u16	tcpct_s_data_desired;		/* bytes of variable data */
-	__u16	tcpct_used;			/* bytes in value */
-	__u8	tcpct_value[TCP_MSS_DEFAULT];
-};
-
-#ifdef __KERNEL__
 
 #include <linux/skbuff.h>
 #include <linux/dmaengine.h>
 #include <net/sock.h>
 #include <net/inet_connection_sock.h>
 #include <net/inet_timewait_sock.h>
+#include <uapi/linux/tcp.h>
 
 static inline struct tcphdr *tcp_hdr(const struct sk_buff *skb)
 {
@@ -595,6 +391,4 @@
 	return 0;
 }
 
-#endif	/* __KERNEL__ */
-
 #endif	/* _LINUX_TCP_H */
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 4b94a61..91b34812 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -44,6 +44,12 @@
 	THERMAL_TRIP_CRITICAL,
 };
 
+enum thermal_trend {
+	THERMAL_TREND_STABLE, /* temperature is stable */
+	THERMAL_TREND_RAISING, /* temperature is raising */
+	THERMAL_TREND_DROPPING, /* temperature is dropping */
+};
+
 struct thermal_zone_device_ops {
 	int (*bind) (struct thermal_zone_device *,
 		     struct thermal_cooling_device *);
@@ -65,6 +71,8 @@
 	int (*set_trip_hyst) (struct thermal_zone_device *, int,
 			      unsigned long);
 	int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *);
+	int (*get_trend) (struct thermal_zone_device *, int,
+			  enum thermal_trend *);
 	int (*notify) (struct thermal_zone_device *, int,
 		       enum thermal_trip_type);
 };
@@ -75,6 +83,8 @@
 	int (*set_cur_state) (struct thermal_cooling_device *, unsigned long);
 };
 
+#define THERMAL_NO_LIMIT -1UL /* no upper/lower limit requirement */
+
 #define THERMAL_TRIPS_NONE -1
 #define THERMAL_MAX_TRIPS 12
 #define THERMAL_NAME_LENGTH 20
@@ -84,6 +94,9 @@
 	struct device device;
 	void *devdata;
 	const struct thermal_cooling_device_ops *ops;
+	bool updated; /* true if the cooling device does not need update */
+	struct mutex lock; /* protect thermal_instances list */
+	struct list_head thermal_instances;
 	struct list_head node;
 };
 
@@ -105,17 +118,16 @@
 	struct thermal_attr *trip_hyst_attrs;
 	void *devdata;
 	int trips;
-	int tc1;
-	int tc2;
 	int passive_delay;
 	int polling_delay;
+	int temperature;
 	int last_temperature;
-	bool passive;
+	int passive;
 	unsigned int forced_passive;
 	const struct thermal_zone_device_ops *ops;
-	struct list_head cooling_devices;
+	struct list_head thermal_instances;
 	struct idr idr;
-	struct mutex lock;	/* protect cooling devices list */
+	struct mutex lock; /* protect thermal_instances list */
 	struct list_head node;
 	struct delayed_work poll_queue;
 };
@@ -152,12 +164,12 @@
 #define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1)
 
 struct thermal_zone_device *thermal_zone_device_register(const char *, int, int,
-		void *, const struct thermal_zone_device_ops *, int tc1,
-		int tc2, int passive_freq, int polling_freq);
+		void *, const struct thermal_zone_device_ops *, int, int);
 void thermal_zone_device_unregister(struct thermal_zone_device *);
 
 int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
-				     struct thermal_cooling_device *);
+				     struct thermal_cooling_device *,
+				     unsigned long, unsigned long);
 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
 				       struct thermal_cooling_device *);
 void thermal_zone_device_update(struct thermal_zone_device *);
diff --git a/include/linux/time.h b/include/linux/time.h
index b51e664..4d358e9 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -1,33 +1,10 @@
 #ifndef _LINUX_TIME_H
 #define _LINUX_TIME_H
 
-#include <linux/types.h>
-
-#ifdef __KERNEL__
 # include <linux/cache.h>
 # include <linux/seqlock.h>
 # include <linux/math64.h>
-#endif
-
-#ifndef _STRUCT_TIMESPEC
-#define _STRUCT_TIMESPEC
-struct timespec {
-	__kernel_time_t	tv_sec;			/* seconds */
-	long		tv_nsec;		/* nanoseconds */
-};
-#endif
-
-struct timeval {
-	__kernel_time_t		tv_sec;		/* seconds */
-	__kernel_suseconds_t	tv_usec;	/* microseconds */
-};
-
-struct timezone {
-	int	tz_minuteswest;	/* minutes west of Greenwich */
-	int	tz_dsttime;	/* type of dst correction */
-};
-
-#ifdef __KERNEL__
+#include <uapi/linux/time.h>
 
 extern struct timezone sys_tz;
 
@@ -280,51 +257,4 @@
 	a->tv_nsec = ns;
 }
 
-#endif /* __KERNEL__ */
-
-/*
- * Names of the interval timers, and structure
- * defining a timer setting:
- */
-#define	ITIMER_REAL		0
-#define	ITIMER_VIRTUAL		1
-#define	ITIMER_PROF		2
-
-struct itimerspec {
-	struct timespec it_interval;	/* timer period */
-	struct timespec it_value;	/* timer expiration */
-};
-
-struct itimerval {
-	struct timeval it_interval;	/* timer interval */
-	struct timeval it_value;	/* current value */
-};
-
-/*
- * The IDs of the various system clocks (for POSIX.1b interval timers):
- */
-#define CLOCK_REALTIME			0
-#define CLOCK_MONOTONIC			1
-#define CLOCK_PROCESS_CPUTIME_ID	2
-#define CLOCK_THREAD_CPUTIME_ID		3
-#define CLOCK_MONOTONIC_RAW		4
-#define CLOCK_REALTIME_COARSE		5
-#define CLOCK_MONOTONIC_COARSE		6
-#define CLOCK_BOOTTIME			7
-#define CLOCK_REALTIME_ALARM		8
-#define CLOCK_BOOTTIME_ALARM		9
-
-/*
- * The IDs of various hardware clocks:
- */
-#define CLOCK_SGI_CYCLE			10
-#define MAX_CLOCKS			16
-#define CLOCKS_MASK			(CLOCK_REALTIME | CLOCK_MONOTONIC)
-#define CLOCKS_MONO			CLOCK_MONOTONIC
-
-/*
- * The various flags for setting POSIX.1b interval timers:
- */
-#define TIMER_ABSTIME			0x01
-
 #endif
diff --git a/include/linux/timekeeper_internal.h b/include/linux/timekeeper_internal.h
new file mode 100644
index 0000000..e1d558e
--- /dev/null
+++ b/include/linux/timekeeper_internal.h
@@ -0,0 +1,108 @@
+/*
+ * You SHOULD NOT be including this unless you're vsyscall
+ * handling code or timekeeping internal code!
+ */
+
+#ifndef _LINUX_TIMEKEEPER_INTERNAL_H
+#define _LINUX_TIMEKEEPER_INTERNAL_H
+
+#include <linux/clocksource.h>
+#include <linux/jiffies.h>
+#include <linux/time.h>
+
+/* Structure holding internal timekeeping values. */
+struct timekeeper {
+	/* Current clocksource used for timekeeping. */
+	struct clocksource	*clock;
+	/* NTP adjusted clock multiplier */
+	u32			mult;
+	/* The shift value of the current clocksource. */
+	u32			shift;
+	/* Number of clock cycles in one NTP interval. */
+	cycle_t			cycle_interval;
+	/* Number of clock shifted nano seconds in one NTP interval. */
+	u64			xtime_interval;
+	/* shifted nano seconds left over when rounding cycle_interval */
+	s64			xtime_remainder;
+	/* Raw nano seconds accumulated per NTP interval. */
+	u32			raw_interval;
+
+	/* Current CLOCK_REALTIME time in seconds */
+	u64			xtime_sec;
+	/* Clock shifted nano seconds */
+	u64			xtime_nsec;
+
+	/* Difference between accumulated time and NTP time in ntp
+	 * shifted nano seconds. */
+	s64			ntp_error;
+	/* Shift conversion between clock shifted nano seconds and
+	 * ntp shifted nano seconds. */
+	u32			ntp_error_shift;
+
+	/*
+	 * wall_to_monotonic is what we need to add to xtime (or xtime corrected
+	 * for sub jiffie times) to get to monotonic time.  Monotonic is pegged
+	 * at zero at system boot time, so wall_to_monotonic will be negative,
+	 * however, we will ALWAYS keep the tv_nsec part positive so we can use
+	 * the usual normalization.
+	 *
+	 * wall_to_monotonic is moved after resume from suspend for the
+	 * monotonic time not to jump. We need to add total_sleep_time to
+	 * wall_to_monotonic to get the real boot based time offset.
+	 *
+	 * - wall_to_monotonic is no longer the boot time, getboottime must be
+	 * used instead.
+	 */
+	struct timespec		wall_to_monotonic;
+	/* Offset clock monotonic -> clock realtime */
+	ktime_t			offs_real;
+	/* time spent in suspend */
+	struct timespec		total_sleep_time;
+	/* Offset clock monotonic -> clock boottime */
+	ktime_t			offs_boot;
+	/* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */
+	struct timespec		raw_time;
+	/* Seqlock for all timekeeper values */
+	seqlock_t		lock;
+};
+
+static inline struct timespec tk_xtime(struct timekeeper *tk)
+{
+	struct timespec ts;
+
+	ts.tv_sec = tk->xtime_sec;
+	ts.tv_nsec = (long)(tk->xtime_nsec >> tk->shift);
+	return ts;
+}
+
+
+#ifdef CONFIG_GENERIC_TIME_VSYSCALL
+
+extern void update_vsyscall(struct timekeeper *tk);
+extern void update_vsyscall_tz(void);
+
+#elif defined(CONFIG_GENERIC_TIME_VSYSCALL_OLD)
+
+extern void update_vsyscall_old(struct timespec *ts, struct timespec *wtm,
+				struct clocksource *c, u32 mult);
+extern void update_vsyscall_tz(void);
+
+static inline void update_vsyscall(struct timekeeper *tk)
+{
+	struct timespec xt;
+
+	xt = tk_xtime(tk);
+	update_vsyscall_old(&xt, &tk->wall_to_monotonic, tk->clock, tk->mult);
+}
+
+#else
+
+static inline void update_vsyscall(struct timekeeper *tk)
+{
+}
+static inline void update_vsyscall_tz(void)
+{
+}
+#endif
+
+#endif /* _LINUX_TIMEKEEPER_INTERNAL_H */
diff --git a/include/linux/timex.h b/include/linux/timex.h
index 7c5ceb2..5ec87c6 100644
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -53,120 +53,11 @@
 #ifndef _LINUX_TIMEX_H
 #define _LINUX_TIMEX_H
 
-#include <linux/time.h>
+#include <uapi/linux/timex.h>
 
-#define NTP_API		4	/* NTP API version */
-
-/*
- * syscall interface - used (mainly by NTP daemon)
- * to discipline kernel clock oscillator
- */
-struct timex {
-	unsigned int modes;	/* mode selector */
-	long offset;		/* time offset (usec) */
-	long freq;		/* frequency offset (scaled ppm) */
-	long maxerror;		/* maximum error (usec) */
-	long esterror;		/* estimated error (usec) */
-	int status;		/* clock command/status */
-	long constant;		/* pll time constant */
-	long precision;		/* clock precision (usec) (read only) */
-	long tolerance;		/* clock frequency tolerance (ppm)
-				 * (read only)
-				 */
-	struct timeval time;	/* (read only, except for ADJ_SETOFFSET) */
-	long tick;		/* (modified) usecs between clock ticks */
-
-	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
-	long jitter;            /* pps jitter (us) (ro) */
-	int shift;              /* interval duration (s) (shift) (ro) */
-	long stabil;            /* pps stability (scaled ppm) (ro) */
-	long jitcnt;            /* jitter limit exceeded (ro) */
-	long calcnt;            /* calibration intervals (ro) */
-	long errcnt;            /* calibration errors (ro) */
-	long stbcnt;            /* stability limit exceeded (ro) */
-
-	int tai;		/* TAI offset (ro) */
-
-	int  :32; int  :32; int  :32; int  :32;
-	int  :32; int  :32; int  :32; int  :32;
-	int  :32; int  :32; int  :32;
-};
-
-/*
- * Mode codes (timex.mode)
- */
-#define ADJ_OFFSET		0x0001	/* time offset */
-#define ADJ_FREQUENCY		0x0002	/* frequency offset */
-#define ADJ_MAXERROR		0x0004	/* maximum time error */
-#define ADJ_ESTERROR		0x0008	/* estimated time error */
-#define ADJ_STATUS		0x0010	/* clock status */
-#define ADJ_TIMECONST		0x0020	/* pll time constant */
-#define ADJ_TAI			0x0080	/* set TAI offset */
-#define ADJ_SETOFFSET		0x0100  /* add 'time' to current time */
-#define ADJ_MICRO		0x1000	/* select microsecond resolution */
-#define ADJ_NANO		0x2000	/* select nanosecond resolution */
-#define ADJ_TICK		0x4000	/* tick value */
-
-#ifdef __KERNEL__
 #define ADJ_ADJTIME		0x8000	/* switch between adjtime/adjtimex modes */
 #define ADJ_OFFSET_SINGLESHOT	0x0001	/* old-fashioned adjtime */
 #define ADJ_OFFSET_READONLY	0x2000	/* read-only adjtime */
-#else
-#define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
-#define ADJ_OFFSET_SS_READ	0xa001	/* read-only adjtime */
-#endif
-
-/* NTP userland likes the MOD_ prefix better */
-#define MOD_OFFSET	ADJ_OFFSET
-#define MOD_FREQUENCY	ADJ_FREQUENCY
-#define MOD_MAXERROR	ADJ_MAXERROR
-#define MOD_ESTERROR	ADJ_ESTERROR
-#define MOD_STATUS	ADJ_STATUS
-#define MOD_TIMECONST	ADJ_TIMECONST
-#define MOD_TAI	ADJ_TAI
-#define MOD_MICRO	ADJ_MICRO
-#define MOD_NANO	ADJ_NANO
-
-
-/*
- * Status codes (timex.status)
- */
-#define STA_PLL		0x0001	/* enable PLL updates (rw) */
-#define STA_PPSFREQ	0x0002	/* enable PPS freq discipline (rw) */
-#define STA_PPSTIME	0x0004	/* enable PPS time discipline (rw) */
-#define STA_FLL		0x0008	/* select frequency-lock mode (rw) */
-
-#define STA_INS		0x0010	/* insert leap (rw) */
-#define STA_DEL		0x0020	/* delete leap (rw) */
-#define STA_UNSYNC	0x0040	/* clock unsynchronized (rw) */
-#define STA_FREQHOLD	0x0080	/* hold frequency (rw) */
-
-#define STA_PPSSIGNAL	0x0100	/* PPS signal present (ro) */
-#define STA_PPSJITTER	0x0200	/* PPS signal jitter exceeded (ro) */
-#define STA_PPSWANDER	0x0400	/* PPS signal wander exceeded (ro) */
-#define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
-
-#define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
-#define STA_NANO	0x2000	/* resolution (0 = us, 1 = ns) (ro) */
-#define STA_MODE	0x4000	/* mode (0 = PLL, 1 = FLL) (ro) */
-#define STA_CLK		0x8000	/* clock source (0 = A, 1 = B) (ro) */
-
-/* read-only bits */
-#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
-	STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
-
-/*
- * Clock states (time_state)
- */
-#define TIME_OK		0	/* clock synchronized, no leap second */
-#define TIME_INS	1	/* insert leap second */
-#define TIME_DEL	2	/* delete leap second */
-#define TIME_OOP	3	/* leap second in progress */
-#define TIME_WAIT	4	/* leap second has occurred */
-#define TIME_ERROR	5	/* clock not synchronized */
-#define TIME_BAD	TIME_ERROR /* bw compat */
-
-#ifdef __KERNEL__
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <linux/param.h>
@@ -261,6 +152,4 @@
 /* The clock frequency of the i8253/i8254 PIT */
 #define PIT_TICK_RATE 1193182ul
 
-#endif /* KERNEL */
-
 #endif /* LINUX_TIMEX_H */
diff --git a/include/linux/toshiba.h b/include/linux/toshiba.h
index 772dedb..915c3bb 100644
--- a/include/linux/toshiba.h
+++ b/include/linux/toshiba.h
@@ -16,25 +16,10 @@
  * General Public License for more details.
  *
  */
-
 #ifndef _LINUX_TOSHIBA_H
 #define _LINUX_TOSHIBA_H
 
-#define TOSH_PROC "/proc/toshiba"
-#define TOSH_DEVICE "/dev/toshiba"
-#define TOSH_SMM _IOWR('t', 0x90, int)	/* broken: meant 24 bytes */
+#include <uapi/linux/toshiba.h>
 
-typedef struct {
-	unsigned int eax;
-	unsigned int ebx __attribute__ ((packed));
-	unsigned int ecx __attribute__ ((packed));
-	unsigned int edx __attribute__ ((packed));
-	unsigned int esi __attribute__ ((packed));
-	unsigned int edi __attribute__ ((packed));
-} SMMRegisters;
-
-#ifdef __KERNEL__
 int tosh_smm(SMMRegisters *regs);
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 4f6c59a..f0b4eb4 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -1,41 +1,6 @@
 #ifndef _LINUX_TTY_H
 #define _LINUX_TTY_H
 
-/*
- * 'tty.h' defines some structures used by tty_io.c and some defines.
- */
-
-#define NR_LDISCS		30
-
-/* line disciplines */
-#define N_TTY		0
-#define N_SLIP		1
-#define N_MOUSE		2
-#define N_PPP		3
-#define N_STRIP		4
-#define N_AX25		5
-#define N_X25		6	/* X.25 async */
-#define N_6PACK		7
-#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
-#define N_R3964		9	/* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL	10	/* Reserved for Profibus */
-#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
-#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data */
-				/* cards about SMS messages */
-#define N_HDLC		13	/* synchronous HDLC */
-#define N_SYNC_PPP	14	/* synchronous PPP */
-#define N_HCI		15	/* Bluetooth HCI UART */
-#define N_GIGASET_M101	16	/* Siemens Gigaset M101 serial DECT adapter */
-#define N_SLCAN		17	/* Serial / USB serial CAN Adaptors */
-#define N_PPS		18	/* Pulse per Second */
-#define N_V253		19	/* Codec control over voice modem */
-#define N_CAIF		20      /* CAIF protocol for talking to modems */
-#define N_GSM0710	21	/* GSM 0710 Mux */
-#define N_TI_WL		22	/* for TI's WL BT, FM, GPS combo chips */
-#define N_TRACESINK	23	/* Trace data routing for MIPI P1149.7 */
-#define N_TRACEROUTER	24	/* Trace data routing for MIPI P1149.7 */
-
-#ifdef __KERNEL__
 #include <linux/fs.h>
 #include <linux/major.h>
 #include <linux/termios.h>
@@ -44,6 +9,7 @@
 #include <linux/tty_ldisc.h>
 #include <linux/mutex.h>
 #include <linux/tty_flags.h>
+#include <uapi/linux/tty.h>
 
 
 
@@ -694,5 +660,4 @@
 } while (0)
 
 
-#endif /* __KERNEL__ */
 #endif
diff --git a/include/linux/types.h b/include/linux/types.h
index bf0dd75..1cc0e4b 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -1,22 +1,13 @@
 #ifndef _LINUX_TYPES_H
 #define _LINUX_TYPES_H
 
-#include <asm/types.h>
+#define __EXPORTED_HEADERS__
+#include <uapi/linux/types.h>
 
 #ifndef __ASSEMBLY__
-#ifdef	__KERNEL__
 
 #define DECLARE_BITMAP(name,bits) \
 	unsigned long name[BITS_TO_LONGS(bits)]
-#else
-#ifndef __EXPORTED_HEADERS__
-#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders"
-#endif /* __EXPORTED_HEADERS__ */
-#endif
-
-#include <linux/posix_types.h>
-
-#ifdef __KERNEL__
 
 typedef __u32 __kernel_dev_t;
 
@@ -157,48 +148,12 @@
 typedef u32 dma_addr_t;
 #endif /* dma_addr_t */
 
-#endif /* __KERNEL__ */
-
-/*
- * Below are truly Linux-specific types that should never collide with
- * any application/library that wants linux/types.h.
- */
-
 #ifdef __CHECKER__
-#define __bitwise__ __attribute__((bitwise))
 #else
-#define __bitwise__
 #endif
 #ifdef __CHECK_ENDIAN__
-#define __bitwise __bitwise__
 #else
-#define __bitwise
 #endif
-
-typedef __u16 __bitwise __le16;
-typedef __u16 __bitwise __be16;
-typedef __u32 __bitwise __le32;
-typedef __u32 __bitwise __be32;
-typedef __u64 __bitwise __le64;
-typedef __u64 __bitwise __be64;
-
-typedef __u16 __bitwise __sum16;
-typedef __u32 __bitwise __wsum;
-
-/*
- * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
- * common 32/64-bit compat problems.
- * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
- * architectures) and to 8-byte boundaries on 64-bit architectures.  The new
- * aligned_64 type enforces 8-byte alignment so that structs containing
- * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
- * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
- */
-#define __aligned_u64 __u64 __attribute__((aligned(8)))
-#define __aligned_be64 __be64 __attribute__((aligned(8)))
-#define __aligned_le64 __le64 __attribute__((aligned(8)))
-
-#ifdef __KERNEL__
 typedef unsigned __bitwise__ gfp_t;
 typedef unsigned __bitwise__ fmode_t;
 
@@ -256,6 +211,5 @@
 };
 #define rcu_head callback_head
 
-#endif	/* __KERNEL__ */
 #endif /*  __ASSEMBLY__ */
 #endif /* _LINUX_TYPES_H */
diff --git a/include/linux/udp.h b/include/linux/udp.h
index 03f72a2..0b67d77 100644
--- a/include/linux/udp.h
+++ b/include/linux/udp.h
@@ -17,28 +17,10 @@
 #ifndef _LINUX_UDP_H
 #define _LINUX_UDP_H
 
-#include <linux/types.h>
-
-struct udphdr {
-	__be16	source;
-	__be16	dest;
-	__be16	len;
-	__sum16	check;
-};
-
-/* UDP socket options */
-#define UDP_CORK	1	/* Never send partially complete segments */
-#define UDP_ENCAP	100	/* Set the socket to accept encapsulated packets */
-
-/* UDP encapsulation types */
-#define UDP_ENCAP_ESPINUDP_NON_IKE	1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
-#define UDP_ENCAP_ESPINUDP	2 /* draft-ietf-ipsec-udp-encaps-06 */
-#define UDP_ENCAP_L2TPINUDP	3 /* rfc2661 */
-
-#ifdef __KERNEL__
 #include <net/inet_sock.h>
 #include <linux/skbuff.h>
 #include <net/netns/hash.h>
+#include <uapi/linux/udp.h>
 
 static inline struct udphdr *udp_hdr(const struct sk_buff *skb)
 {
@@ -96,6 +78,4 @@
 
 #define IS_UDPLITE(__sk) (udp_sk(__sk)->pcflag)
 
-#endif
-
 #endif	/* _LINUX_UDP_H */
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
index c454bbe..0a4487d3 100644
--- a/include/linux/uinput.h
+++ b/include/linux/uinput.h
@@ -1,5 +1,3 @@
-#ifndef __UINPUT_H_
-#define __UINPUT_H_
 /*
  *  User level driver support for input subsystem
  *
@@ -31,13 +29,11 @@
  *	0.1	20/06/2002
  *		- first public version
  */
+#ifndef __UINPUT_H_
+#define __UINPUT_H_
 
-#include <linux/types.h>
-#include <linux/input.h>
+#include <uapi/linux/uinput.h>
 
-#define UINPUT_VERSION		3
-
-#ifdef __KERNEL__
 #define UINPUT_NAME		"uinput"
 #define UINPUT_BUFFER_SIZE	16
 #define UINPUT_NUM_REQUESTS	16
@@ -75,103 +71,4 @@
 	wait_queue_head_t	requests_waitq;
 	spinlock_t		requests_lock;
 };
-#endif	/* __KERNEL__ */
-
-struct uinput_ff_upload {
-	__u32			request_id;
-	__s32			retval;
-	struct ff_effect	effect;
-	struct ff_effect	old;
-};
-
-struct uinput_ff_erase {
-	__u32			request_id;
-	__s32			retval;
-	__u32			effect_id;
-};
-
-/* ioctl */
-#define UINPUT_IOCTL_BASE	'U'
-#define UI_DEV_CREATE		_IO(UINPUT_IOCTL_BASE, 1)
-#define UI_DEV_DESTROY		_IO(UINPUT_IOCTL_BASE, 2)
-
-#define UI_SET_EVBIT		_IOW(UINPUT_IOCTL_BASE, 100, int)
-#define UI_SET_KEYBIT		_IOW(UINPUT_IOCTL_BASE, 101, int)
-#define UI_SET_RELBIT		_IOW(UINPUT_IOCTL_BASE, 102, int)
-#define UI_SET_ABSBIT		_IOW(UINPUT_IOCTL_BASE, 103, int)
-#define UI_SET_MSCBIT		_IOW(UINPUT_IOCTL_BASE, 104, int)
-#define UI_SET_LEDBIT		_IOW(UINPUT_IOCTL_BASE, 105, int)
-#define UI_SET_SNDBIT		_IOW(UINPUT_IOCTL_BASE, 106, int)
-#define UI_SET_FFBIT		_IOW(UINPUT_IOCTL_BASE, 107, int)
-#define UI_SET_PHYS		_IOW(UINPUT_IOCTL_BASE, 108, char*)
-#define UI_SET_SWBIT		_IOW(UINPUT_IOCTL_BASE, 109, int)
-#define UI_SET_PROPBIT		_IOW(UINPUT_IOCTL_BASE, 110, int)
-
-#define UI_BEGIN_FF_UPLOAD	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
-#define UI_END_FF_UPLOAD	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
-#define UI_BEGIN_FF_ERASE	_IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
-#define UI_END_FF_ERASE		_IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
-
-/*
- * To write a force-feedback-capable driver, the upload_effect
- * and erase_effect callbacks in input_dev must be implemented.
- * The uinput driver will generate a fake input event when one of
- * these callbacks are invoked. The userspace code then uses
- * ioctls to retrieve additional parameters and send the return code.
- * The callback blocks until this return code is sent.
- *
- * The described callback mechanism is only used if ff_effects_max
- * is set.
- *
- * To implement upload_effect():
- *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD.
- *      A request ID will be given in 'value'.
- *   2. Allocate a uinput_ff_upload struct, fill in request_id with
- *      the 'value' from the EV_UINPUT event.
- *   3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
- *      uinput_ff_upload struct. It will be filled in with the
- *      ff_effects passed to upload_effect().
- *   4. Perform the effect upload, and place a return code back into
-        the uinput_ff_upload struct.
- *   5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
- *      uinput_ff_upload_effect struct. This will complete execution
- *      of our upload_effect() handler.
- *
- * To implement erase_effect():
- *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE.
- *      A request ID will be given in 'value'.
- *   2. Allocate a uinput_ff_erase struct, fill in request_id with
- *      the 'value' from the EV_UINPUT event.
- *   3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
- *      uinput_ff_erase struct. It will be filled in with the
- *      effect ID passed to erase_effect().
- *   4. Perform the effect erasure, and place a return code back
- *      into the uinput_ff_erase struct.
- *   5. Issue a UI_END_FF_ERASE ioctl, also giving it the
- *      uinput_ff_erase_effect struct. This will complete execution
- *      of our erase_effect() handler.
- */
-
-/*
- * This is the new event type, used only by uinput.
- * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
- * is the unique request ID. This number was picked
- * arbitrarily, above EV_MAX (since the input system
- * never sees it) but in the range of a 16-bit int.
- */
-#define EV_UINPUT		0x0101
-#define UI_FF_UPLOAD		1
-#define UI_FF_ERASE		2
-
-#define UINPUT_MAX_NAME_SIZE	80
-struct uinput_user_dev {
-	char name[UINPUT_MAX_NAME_SIZE];
-	struct input_id id;
-	__u32 ff_effects_max;
-	__s32 absmax[ABS_CNT];
-	__s32 absmin[ABS_CNT];
-	__s32 absfuzz[ABS_CNT];
-	__s32 absflat[ABS_CNT];
-};
 #endif	/* __UINPUT_H_ */
-
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 98c1143..629aaf5 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -1,9 +1,3 @@
-#ifndef __LINUX_UIO_H
-#define __LINUX_UIO_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-
 /*
  *	Berkeley style UIO structures	-	Alan Cox 1994.
  *
@@ -12,21 +6,11 @@
  *		as published by the Free Software Foundation; either version
  *		2 of the License, or (at your option) any later version.
  */
+#ifndef __LINUX_UIO_H
+#define __LINUX_UIO_H
 
-struct iovec
-{
-	void __user *iov_base;	/* BSD uses caddr_t (1003.1g requires void *) */
-	__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
-};
+#include <uapi/linux/uio.h>
 
-/*
- *	UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
- */
- 
-#define UIO_FASTIOV	8
-#define UIO_MAXIOV	1024
-
-#ifdef __KERNEL__
 
 struct kvec {
 	void *iov_base; /* and that should *never* hold a userland pointer */
@@ -52,5 +36,3 @@
 
 unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
 #endif
-
-#endif
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index f87cf62..ddbbb7d 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -68,6 +68,7 @@
 #		define EVENT_RX_PAUSED	5
 #		define EVENT_DEV_ASLEEP 6
 #		define EVENT_DEV_OPEN	7
+#		define EVENT_DEVICE_REPORT_IDLE	8
 };
 
 static inline struct usb_driver *driver_of(struct usb_interface *intf)
@@ -160,6 +161,7 @@
 extern int usbnet_suspend(struct usb_interface *, pm_message_t);
 extern int usbnet_resume(struct usb_interface *);
 extern void usbnet_disconnect(struct usb_interface *);
+extern void usbnet_device_suggests_idle(struct usbnet *dev);
 
 
 /* Drivers that reuse some of the standard USB CDC infrastructure
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 4abe28e4..04a2628 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -25,126 +25,11 @@
  */
 
 /*****************************************************************************/
-
 #ifndef _LINUX_USBDEVICE_FS_H
 #define _LINUX_USBDEVICE_FS_H
 
-#include <linux/types.h>
-#include <linux/magic.h>
+#include <uapi/linux/usbdevice_fs.h>
 
-/* --------------------------------------------------------------------- */
-
-/* usbdevfs ioctl codes */
-
-struct usbdevfs_ctrltransfer {
-	__u8 bRequestType;
-	__u8 bRequest;
-	__u16 wValue;
-	__u16 wIndex;
-	__u16 wLength;
-	__u32 timeout;  /* in milliseconds */
- 	void __user *data;
-};
-
-struct usbdevfs_bulktransfer {
-	unsigned int ep;
-	unsigned int len;
-	unsigned int timeout; /* in milliseconds */
-	void __user *data;
-};
-
-struct usbdevfs_setinterface {
-	unsigned int interface;
-	unsigned int altsetting;
-};
-
-struct usbdevfs_disconnectsignal {
-	unsigned int signr;
-	void __user *context;
-};
-
-#define USBDEVFS_MAXDRIVERNAME 255
-
-struct usbdevfs_getdriver {
-	unsigned int interface;
-	char driver[USBDEVFS_MAXDRIVERNAME + 1];
-};
-
-struct usbdevfs_connectinfo {
-	unsigned int devnum;
-	unsigned char slow;
-};
-
-#define USBDEVFS_URB_SHORT_NOT_OK	0x01
-#define USBDEVFS_URB_ISO_ASAP		0x02
-#define USBDEVFS_URB_BULK_CONTINUATION	0x04
-#define USBDEVFS_URB_NO_FSBR		0x20
-#define USBDEVFS_URB_ZERO_PACKET	0x40
-#define USBDEVFS_URB_NO_INTERRUPT	0x80
-
-#define USBDEVFS_URB_TYPE_ISO		   0
-#define USBDEVFS_URB_TYPE_INTERRUPT	   1
-#define USBDEVFS_URB_TYPE_CONTROL	   2
-#define USBDEVFS_URB_TYPE_BULK		   3
-
-struct usbdevfs_iso_packet_desc {
-	unsigned int length;
-	unsigned int actual_length;
-	unsigned int status;
-};
-
-struct usbdevfs_urb {
-	unsigned char type;
-	unsigned char endpoint;
-	int status;
-	unsigned int flags;
-	void __user *buffer;
-	int buffer_length;
-	int actual_length;
-	int start_frame;
-	int number_of_packets;
-	int error_count;
-	unsigned int signr;	/* signal to be sent on completion,
-				  or 0 if none should be sent. */
-	void __user *usercontext;
-	struct usbdevfs_iso_packet_desc iso_frame_desc[0];
-};
-
-/* ioctls for talking directly to drivers */
-struct usbdevfs_ioctl {
-	int	ifno;		/* interface 0..N ; negative numbers reserved */
-	int	ioctl_code;	/* MUST encode size + direction of data so the
-				 * macros in <asm/ioctl.h> give correct values */
-	void __user *data;	/* param buffer (in, or out) */
-};
-
-/* You can do most things with hubs just through control messages,
- * except find out what device connects to what port. */
-struct usbdevfs_hub_portinfo {
-	char nports;		/* number of downstream ports in this hub */
-	char port [127];	/* e.g. port 3 connects to device 27 */
-};
-
-/* Device capability flags */
-#define USBDEVFS_CAP_ZERO_PACKET		0x01
-#define USBDEVFS_CAP_BULK_CONTINUATION		0x02
-#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM		0x04
-#define USBDEVFS_CAP_BULK_SCATTER_GATHER	0x08
-
-/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
-
-/* disconnect-and-claim if the driver matches the driver field */
-#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER	0x01
-/* disconnect-and-claim except when the driver matches the driver field */
-#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER	0x02
-
-struct usbdevfs_disconnect_claim {
-	unsigned int interface;
-	unsigned int flags;
-	char driver[USBDEVFS_MAXDRIVERNAME + 1];
-};
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 #include <linux/compat.h>
 
@@ -192,38 +77,4 @@
 	compat_caddr_t data;
 };
 #endif
-#endif /* __KERNEL__ */
-
-#define USBDEVFS_CONTROL           _IOWR('U', 0, struct usbdevfs_ctrltransfer)
-#define USBDEVFS_CONTROL32           _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
-#define USBDEVFS_BULK              _IOWR('U', 2, struct usbdevfs_bulktransfer)
-#define USBDEVFS_BULK32              _IOWR('U', 2, struct usbdevfs_bulktransfer32)
-#define USBDEVFS_RESETEP           _IOR('U', 3, unsigned int)
-#define USBDEVFS_SETINTERFACE      _IOR('U', 4, struct usbdevfs_setinterface)
-#define USBDEVFS_SETCONFIGURATION  _IOR('U', 5, unsigned int)
-#define USBDEVFS_GETDRIVER         _IOW('U', 8, struct usbdevfs_getdriver)
-#define USBDEVFS_SUBMITURB         _IOR('U', 10, struct usbdevfs_urb)
-#define USBDEVFS_SUBMITURB32       _IOR('U', 10, struct usbdevfs_urb32)
-#define USBDEVFS_DISCARDURB        _IO('U', 11)
-#define USBDEVFS_REAPURB           _IOW('U', 12, void *)
-#define USBDEVFS_REAPURB32         _IOW('U', 12, __u32)
-#define USBDEVFS_REAPURBNDELAY     _IOW('U', 13, void *)
-#define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, __u32)
-#define USBDEVFS_DISCSIGNAL        _IOR('U', 14, struct usbdevfs_disconnectsignal)
-#define USBDEVFS_DISCSIGNAL32      _IOR('U', 14, struct usbdevfs_disconnectsignal32)
-#define USBDEVFS_CLAIMINTERFACE    _IOR('U', 15, unsigned int)
-#define USBDEVFS_RELEASEINTERFACE  _IOR('U', 16, unsigned int)
-#define USBDEVFS_CONNECTINFO       _IOW('U', 17, struct usbdevfs_connectinfo)
-#define USBDEVFS_IOCTL             _IOWR('U', 18, struct usbdevfs_ioctl)
-#define USBDEVFS_IOCTL32           _IOWR('U', 18, struct usbdevfs_ioctl32)
-#define USBDEVFS_HUB_PORTINFO      _IOR('U', 19, struct usbdevfs_hub_portinfo)
-#define USBDEVFS_RESET             _IO('U', 20)
-#define USBDEVFS_CLEAR_HALT        _IOR('U', 21, unsigned int)
-#define USBDEVFS_DISCONNECT        _IO('U', 22)
-#define USBDEVFS_CONNECT           _IO('U', 23)
-#define USBDEVFS_CLAIM_PORT        _IOR('U', 24, unsigned int)
-#define USBDEVFS_RELEASE_PORT      _IOR('U', 25, unsigned int)
-#define USBDEVFS_GET_CAPABILITIES  _IOR('U', 26, __u32)
-#define USBDEVFS_DISCONNECT_CLAIM  _IOR('U', 27, struct usbdevfs_disconnect_claim)
-
 #endif /* _LINUX_USBDEVICE_FS_H */
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
index c714ed7..2b34520 100644
--- a/include/linux/utsname.h
+++ b/include/linux/utsname.h
@@ -1,41 +1,12 @@
 #ifndef _LINUX_UTSNAME_H
 #define _LINUX_UTSNAME_H
 
-#define __OLD_UTS_LEN 8
-
-struct oldold_utsname {
-	char sysname[9];
-	char nodename[9];
-	char release[9];
-	char version[9];
-	char machine[9];
-};
-
-#define __NEW_UTS_LEN 64
-
-struct old_utsname {
-	char sysname[65];
-	char nodename[65];
-	char release[65];
-	char version[65];
-	char machine[65];
-};
-
-struct new_utsname {
-	char sysname[__NEW_UTS_LEN + 1];
-	char nodename[__NEW_UTS_LEN + 1];
-	char release[__NEW_UTS_LEN + 1];
-	char version[__NEW_UTS_LEN + 1];
-	char machine[__NEW_UTS_LEN + 1];
-	char domainname[__NEW_UTS_LEN + 1];
-};
-
-#ifdef __KERNEL__
 
 #include <linux/sched.h>
 #include <linux/kref.h>
 #include <linux/nsproxy.h>
 #include <linux/err.h>
+#include <uapi/linux/utsname.h>
 
 enum uts_proc {
 	UTS_PROC_OSTYPE,
@@ -108,6 +79,4 @@
 
 extern struct rw_semaphore uts_sem;
 
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_UTSNAME_H */
diff --git a/include/linux/uuid.h b/include/linux/uuid.h
index f86c37b..6df2509 100644
--- a/include/linux/uuid.h
+++ b/include/linux/uuid.h
@@ -17,44 +17,11 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-
 #ifndef _LINUX_UUID_H_
 #define _LINUX_UUID_H_
 
-#include <linux/types.h>
-#include <linux/string.h>
+#include <uapi/linux/uuid.h>
 
-typedef struct {
-	__u8 b[16];
-} uuid_le;
-
-typedef struct {
-	__u8 b[16];
-} uuid_be;
-
-#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
-((uuid_le)								\
-{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
-   (b) & 0xff, ((b) >> 8) & 0xff,					\
-   (c) & 0xff, ((c) >> 8) & 0xff,					\
-   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
-
-#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
-((uuid_be)								\
-{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \
-   ((b) >> 8) & 0xff, (b) & 0xff,					\
-   ((c) >> 8) & 0xff, (c) & 0xff,					\
-   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
-
-#define NULL_UUID_LE							\
-	UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
-		0x00, 0x00, 0x00, 0x00)
-
-#define NULL_UUID_BE							\
-	UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
-		0x00, 0x00, 0x00, 0x00)
-
-#ifdef __KERNEL__
 
 static inline int uuid_le_cmp(const uuid_le u1, const uuid_le u2)
 {
@@ -69,6 +36,4 @@
 extern void uuid_le_gen(uuid_le *u);
 extern void uuid_be_gen(uuid_be *u);
 
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index 0a4f180..ab9e862 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -11,15 +11,10 @@
 #ifndef VFIO_H
 #define VFIO_H
 
-#include <linux/types.h>
-#include <linux/ioctl.h>
-
-#define VFIO_API_VERSION	0
-
-#ifdef __KERNEL__	/* Internal VFIO-core/bus driver API */
 
 #include <linux/iommu.h>
 #include <linux/mm.h>
+#include <uapi/linux/vfio.h>
 
 /**
  * struct vfio_device_ops - VFIO bus driver device callbacks
@@ -92,354 +87,4 @@
 	TYPE tmp;						\
 	offsetof(TYPE, MEMBER) + sizeof(tmp.MEMBER); })		\
 
-#endif /* __KERNEL__ */
-
-/* Kernel & User level defines for VFIO IOCTLs. */
-
-/* Extensions */
-
-#define VFIO_TYPE1_IOMMU		1
-
-/*
- * The IOCTL interface is designed for extensibility by embedding the
- * structure length (argsz) and flags into structures passed between
- * kernel and userspace.  We therefore use the _IO() macro for these
- * defines to avoid implicitly embedding a size into the ioctl request.
- * As structure fields are added, argsz will increase to match and flag
- * bits will be defined to indicate additional fields with valid data.
- * It's *always* the caller's responsibility to indicate the size of
- * the structure passed by setting argsz appropriately.
- */
-
-#define VFIO_TYPE	(';')
-#define VFIO_BASE	100
-
-/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
-
-/**
- * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
- *
- * Report the version of the VFIO API.  This allows us to bump the entire
- * API version should we later need to add or change features in incompatible
- * ways.
- * Return: VFIO_API_VERSION
- * Availability: Always
- */
-#define VFIO_GET_API_VERSION		_IO(VFIO_TYPE, VFIO_BASE + 0)
-
-/**
- * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
- *
- * Check whether an extension is supported.
- * Return: 0 if not supported, 1 (or some other positive integer) if supported.
- * Availability: Always
- */
-#define VFIO_CHECK_EXTENSION		_IO(VFIO_TYPE, VFIO_BASE + 1)
-
-/**
- * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
- *
- * Set the iommu to the given type.  The type must be supported by an
- * iommu driver as verified by calling CHECK_EXTENSION using the same
- * type.  A group must be set to this file descriptor before this
- * ioctl is available.  The IOMMU interfaces enabled by this call are
- * specific to the value set.
- * Return: 0 on success, -errno on failure
- * Availability: When VFIO group attached
- */
-#define VFIO_SET_IOMMU			_IO(VFIO_TYPE, VFIO_BASE + 2)
-
-/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
-
-/**
- * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
- *						struct vfio_group_status)
- *
- * Retrieve information about the group.  Fills in provided
- * struct vfio_group_info.  Caller sets argsz.
- * Return: 0 on succes, -errno on failure.
- * Availability: Always
- */
-struct vfio_group_status {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_GROUP_FLAGS_VIABLE		(1 << 0)
-#define VFIO_GROUP_FLAGS_CONTAINER_SET	(1 << 1)
-};
-#define VFIO_GROUP_GET_STATUS		_IO(VFIO_TYPE, VFIO_BASE + 3)
-
-/**
- * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
- *
- * Set the container for the VFIO group to the open VFIO file
- * descriptor provided.  Groups may only belong to a single
- * container.  Containers may, at their discretion, support multiple
- * groups.  Only when a container is set are all of the interfaces
- * of the VFIO file descriptor and the VFIO group file descriptor
- * available to the user.
- * Return: 0 on success, -errno on failure.
- * Availability: Always
- */
-#define VFIO_GROUP_SET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 4)
-
-/**
- * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
- *
- * Remove the group from the attached container.  This is the
- * opposite of the SET_CONTAINER call and returns the group to
- * an initial state.  All device file descriptors must be released
- * prior to calling this interface.  When removing the last group
- * from a container, the IOMMU will be disabled and all state lost,
- * effectively also returning the VFIO file descriptor to an initial
- * state.
- * Return: 0 on success, -errno on failure.
- * Availability: When attached to container
- */
-#define VFIO_GROUP_UNSET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 5)
-
-/**
- * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
- *
- * Return a new file descriptor for the device object described by
- * the provided string.  The string should match a device listed in
- * the devices subdirectory of the IOMMU group sysfs entry.  The
- * group containing the device must already be added to this context.
- * Return: new file descriptor on success, -errno on failure.
- * Availability: When attached to container
- */
-#define VFIO_GROUP_GET_DEVICE_FD	_IO(VFIO_TYPE, VFIO_BASE + 6)
-
-/* --------------- IOCTLs for DEVICE file descriptors --------------- */
-
-/**
- * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
- *						struct vfio_device_info)
- *
- * Retrieve information about the device.  Fills in provided
- * struct vfio_device_info.  Caller sets argsz.
- * Return: 0 on success, -errno on failure.
- */
-struct vfio_device_info {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_DEVICE_FLAGS_RESET	(1 << 0)	/* Device supports reset */
-#define VFIO_DEVICE_FLAGS_PCI	(1 << 1)	/* vfio-pci device */
-	__u32	num_regions;	/* Max region index + 1 */
-	__u32	num_irqs;	/* Max IRQ index + 1 */
-};
-#define VFIO_DEVICE_GET_INFO		_IO(VFIO_TYPE, VFIO_BASE + 7)
-
-/**
- * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
- *				       struct vfio_region_info)
- *
- * Retrieve information about a device region.  Caller provides
- * struct vfio_region_info with index value set.  Caller sets argsz.
- * Implementation of region mapping is bus driver specific.  This is
- * intended to describe MMIO, I/O port, as well as bus specific
- * regions (ex. PCI config space).  Zero sized regions may be used
- * to describe unimplemented regions (ex. unimplemented PCI BARs).
- * Return: 0 on success, -errno on failure.
- */
-struct vfio_region_info {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_REGION_INFO_FLAG_READ	(1 << 0) /* Region supports read */
-#define VFIO_REGION_INFO_FLAG_WRITE	(1 << 1) /* Region supports write */
-#define VFIO_REGION_INFO_FLAG_MMAP	(1 << 2) /* Region supports mmap */
-	__u32	index;		/* Region index */
-	__u32	resv;		/* Reserved for alignment */
-	__u64	size;		/* Region size (bytes) */
-	__u64	offset;		/* Region offset from start of device fd */
-};
-#define VFIO_DEVICE_GET_REGION_INFO	_IO(VFIO_TYPE, VFIO_BASE + 8)
-
-/**
- * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
- *				    struct vfio_irq_info)
- *
- * Retrieve information about a device IRQ.  Caller provides
- * struct vfio_irq_info with index value set.  Caller sets argsz.
- * Implementation of IRQ mapping is bus driver specific.  Indexes
- * using multiple IRQs are primarily intended to support MSI-like
- * interrupt blocks.  Zero count irq blocks may be used to describe
- * unimplemented interrupt types.
- *
- * The EVENTFD flag indicates the interrupt index supports eventfd based
- * signaling.
- *
- * The MASKABLE flags indicates the index supports MASK and UNMASK
- * actions described below.
- *
- * AUTOMASKED indicates that after signaling, the interrupt line is
- * automatically masked by VFIO and the user needs to unmask the line
- * to receive new interrupts.  This is primarily intended to distinguish
- * level triggered interrupts.
- *
- * The NORESIZE flag indicates that the interrupt lines within the index
- * are setup as a set and new subindexes cannot be enabled without first
- * disabling the entire index.  This is used for interrupts like PCI MSI
- * and MSI-X where the driver may only use a subset of the available
- * indexes, but VFIO needs to enable a specific number of vectors
- * upfront.  In the case of MSI-X, where the user can enable MSI-X and
- * then add and unmask vectors, it's up to userspace to make the decision
- * whether to allocate the maximum supported number of vectors or tear
- * down setup and incrementally increase the vectors as each is enabled.
- */
-struct vfio_irq_info {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_IRQ_INFO_EVENTFD		(1 << 0)
-#define VFIO_IRQ_INFO_MASKABLE		(1 << 1)
-#define VFIO_IRQ_INFO_AUTOMASKED	(1 << 2)
-#define VFIO_IRQ_INFO_NORESIZE		(1 << 3)
-	__u32	index;		/* IRQ index */
-	__u32	count;		/* Number of IRQs within this index */
-};
-#define VFIO_DEVICE_GET_IRQ_INFO	_IO(VFIO_TYPE, VFIO_BASE + 9)
-
-/**
- * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
- *
- * Set signaling, masking, and unmasking of interrupts.  Caller provides
- * struct vfio_irq_set with all fields set.  'start' and 'count' indicate
- * the range of subindexes being specified.
- *
- * The DATA flags specify the type of data provided.  If DATA_NONE, the
- * operation performs the specified action immediately on the specified
- * interrupt(s).  For example, to unmask AUTOMASKED interrupt [0,0]:
- * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
- *
- * DATA_BOOL allows sparse support for the same on arrays of interrupts.
- * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
- * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
- * data = {1,0,1}
- *
- * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
- * A value of -1 can be used to either de-assign interrupts if already
- * assigned or skip un-assigned interrupts.  For example, to set an eventfd
- * to be trigger for interrupts [0,0] and [0,2]:
- * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
- * data = {fd1, -1, fd2}
- * If index [0,1] is previously set, two count = 1 ioctls calls would be
- * required to set [0,0] and [0,2] without changing [0,1].
- *
- * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
- * with ACTION_TRIGGER to perform kernel level interrupt loopback testing
- * from userspace (ie. simulate hardware triggering).
- *
- * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
- * enables the interrupt index for the device.  Individual subindex interrupts
- * can be disabled using the -1 value for DATA_EVENTFD or the index can be
- * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
- *
- * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
- * ACTION_TRIGGER specifies kernel->user signaling.
- */
-struct vfio_irq_set {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_IRQ_SET_DATA_NONE		(1 << 0) /* Data not present */
-#define VFIO_IRQ_SET_DATA_BOOL		(1 << 1) /* Data is bool (u8) */
-#define VFIO_IRQ_SET_DATA_EVENTFD	(1 << 2) /* Data is eventfd (s32) */
-#define VFIO_IRQ_SET_ACTION_MASK	(1 << 3) /* Mask interrupt */
-#define VFIO_IRQ_SET_ACTION_UNMASK	(1 << 4) /* Unmask interrupt */
-#define VFIO_IRQ_SET_ACTION_TRIGGER	(1 << 5) /* Trigger interrupt */
-	__u32	index;
-	__u32	start;
-	__u32	count;
-	__u8	data[];
-};
-#define VFIO_DEVICE_SET_IRQS		_IO(VFIO_TYPE, VFIO_BASE + 10)
-
-#define VFIO_IRQ_SET_DATA_TYPE_MASK	(VFIO_IRQ_SET_DATA_NONE | \
-					 VFIO_IRQ_SET_DATA_BOOL | \
-					 VFIO_IRQ_SET_DATA_EVENTFD)
-#define VFIO_IRQ_SET_ACTION_TYPE_MASK	(VFIO_IRQ_SET_ACTION_MASK | \
-					 VFIO_IRQ_SET_ACTION_UNMASK | \
-					 VFIO_IRQ_SET_ACTION_TRIGGER)
-/**
- * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
- *
- * Reset a device.
- */
-#define VFIO_DEVICE_RESET		_IO(VFIO_TYPE, VFIO_BASE + 11)
-
-/*
- * The VFIO-PCI bus driver makes use of the following fixed region and
- * IRQ index mapping.  Unimplemented regions return a size of zero.
- * Unimplemented IRQ types return a count of zero.
- */
-
-enum {
-	VFIO_PCI_BAR0_REGION_INDEX,
-	VFIO_PCI_BAR1_REGION_INDEX,
-	VFIO_PCI_BAR2_REGION_INDEX,
-	VFIO_PCI_BAR3_REGION_INDEX,
-	VFIO_PCI_BAR4_REGION_INDEX,
-	VFIO_PCI_BAR5_REGION_INDEX,
-	VFIO_PCI_ROM_REGION_INDEX,
-	VFIO_PCI_CONFIG_REGION_INDEX,
-	VFIO_PCI_NUM_REGIONS
-};
-
-enum {
-	VFIO_PCI_INTX_IRQ_INDEX,
-	VFIO_PCI_MSI_IRQ_INDEX,
-	VFIO_PCI_MSIX_IRQ_INDEX,
-	VFIO_PCI_NUM_IRQS
-};
-
-/* -------- API for Type1 VFIO IOMMU -------- */
-
-/**
- * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
- *
- * Retrieve information about the IOMMU object. Fills in provided
- * struct vfio_iommu_info. Caller sets argsz.
- *
- * XXX Should we do these by CHECK_EXTENSION too?
- */
-struct vfio_iommu_type1_info {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_IOMMU_INFO_PGSIZES (1 << 0)	/* supported page sizes info */
-	__u64	iova_pgsizes;		/* Bitmap of supported page sizes */
-};
-
-#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
-
-/**
- * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
- *
- * Map process virtual addresses to IO virtual addresses using the
- * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
- */
-struct vfio_iommu_type1_dma_map {
-	__u32	argsz;
-	__u32	flags;
-#define VFIO_DMA_MAP_FLAG_READ (1 << 0)		/* readable from device */
-#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1)	/* writable from device */
-	__u64	vaddr;				/* Process virtual address */
-	__u64	iova;				/* IO virtual address */
-	__u64	size;				/* Size of mapping (bytes) */
-};
-
-#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
-
-/**
- * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap)
- *
- * Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
- * Caller sets argsz.
- */
-struct vfio_iommu_type1_dma_unmap {
-	__u32	argsz;
-	__u32	flags;
-	__u64	iova;				/* IO virtual address */
-	__u64	size;				/* Size of mapping (bytes) */
-};
-
-#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
-
 #endif /* VFIO_H */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 873adbe..73ea2fb 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -56,1945 +56,7 @@
 #ifndef __LINUX_VIDEODEV2_H
 #define __LINUX_VIDEODEV2_H
 
-#ifdef __KERNEL__
 #include <linux/time.h>     /* need struct timeval */
-#else
-#include <sys/time.h>
-#endif
-#include <linux/compiler.h>
-#include <linux/ioctl.h>
-#include <linux/types.h>
-#include <linux/v4l2-common.h>
-#include <linux/v4l2-controls.h>
-
-/*
- * Common stuff for both V4L1 and V4L2
- * Moved from videodev.h
- */
-#define VIDEO_MAX_FRAME               32
-#define VIDEO_MAX_PLANES               8
-
-#ifndef __KERNEL__
-
-/* These defines are V4L1 specific and should not be used with the V4L2 API!
-   They will be removed from this header in the future. */
-
-#define VID_TYPE_CAPTURE	1	/* Can capture */
-#define VID_TYPE_TUNER		2	/* Can tune */
-#define VID_TYPE_TELETEXT	4	/* Does teletext */
-#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
-#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
-#define VID_TYPE_CLIPPING	32	/* Can clip */
-#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
-#define VID_TYPE_SCALES		128	/* Scalable */
-#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
-#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
-#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
-#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
-#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
-#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
-#endif
-
-/*
- *	M I S C E L L A N E O U S
- */
-
-/*  Four-character-code (FOURCC) */
-#define v4l2_fourcc(a, b, c, d)\
-	((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
-
-/*
- *	E N U M S
- */
-enum v4l2_field {
-	V4L2_FIELD_ANY           = 0, /* driver can choose from none,
-					 top, bottom, interlaced
-					 depending on whatever it thinks
-					 is approximate ... */
-	V4L2_FIELD_NONE          = 1, /* this device has no fields ... */
-	V4L2_FIELD_TOP           = 2, /* top field only */
-	V4L2_FIELD_BOTTOM        = 3, /* bottom field only */
-	V4L2_FIELD_INTERLACED    = 4, /* both fields interlaced */
-	V4L2_FIELD_SEQ_TB        = 5, /* both fields sequential into one
-					 buffer, top-bottom order */
-	V4L2_FIELD_SEQ_BT        = 6, /* same as above + bottom-top order */
-	V4L2_FIELD_ALTERNATE     = 7, /* both fields alternating into
-					 separate buffers */
-	V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
-					 first and the top field is
-					 transmitted first */
-	V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
-					 first and the bottom field is
-					 transmitted first */
-};
-#define V4L2_FIELD_HAS_TOP(field)	\
-	((field) == V4L2_FIELD_TOP 	||\
-	 (field) == V4L2_FIELD_INTERLACED ||\
-	 (field) == V4L2_FIELD_INTERLACED_TB ||\
-	 (field) == V4L2_FIELD_INTERLACED_BT ||\
-	 (field) == V4L2_FIELD_SEQ_TB	||\
-	 (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTTOM(field)	\
-	((field) == V4L2_FIELD_BOTTOM 	||\
-	 (field) == V4L2_FIELD_INTERLACED ||\
-	 (field) == V4L2_FIELD_INTERLACED_TB ||\
-	 (field) == V4L2_FIELD_INTERLACED_BT ||\
-	 (field) == V4L2_FIELD_SEQ_TB	||\
-	 (field) == V4L2_FIELD_SEQ_BT)
-#define V4L2_FIELD_HAS_BOTH(field)	\
-	((field) == V4L2_FIELD_INTERLACED ||\
-	 (field) == V4L2_FIELD_INTERLACED_TB ||\
-	 (field) == V4L2_FIELD_INTERLACED_BT ||\
-	 (field) == V4L2_FIELD_SEQ_TB ||\
-	 (field) == V4L2_FIELD_SEQ_BT)
-
-enum v4l2_buf_type {
-	V4L2_BUF_TYPE_VIDEO_CAPTURE        = 1,
-	V4L2_BUF_TYPE_VIDEO_OUTPUT         = 2,
-	V4L2_BUF_TYPE_VIDEO_OVERLAY        = 3,
-	V4L2_BUF_TYPE_VBI_CAPTURE          = 4,
-	V4L2_BUF_TYPE_VBI_OUTPUT           = 5,
-	V4L2_BUF_TYPE_SLICED_VBI_CAPTURE   = 6,
-	V4L2_BUF_TYPE_SLICED_VBI_OUTPUT    = 7,
-#if 1
-	/* Experimental */
-	V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
-#endif
-	V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9,
-	V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE  = 10,
-	/* Deprecated, do not use */
-	V4L2_BUF_TYPE_PRIVATE              = 0x80,
-};
-
-#define V4L2_TYPE_IS_MULTIPLANAR(type)			\
-	((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE	\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
-
-#define V4L2_TYPE_IS_OUTPUT(type)				\
-	((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT			\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE		\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY		\
-	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY	\
-	 || (type) == V4L2_BUF_TYPE_VBI_OUTPUT			\
-	 || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
-
-enum v4l2_tuner_type {
-	V4L2_TUNER_RADIO	     = 1,
-	V4L2_TUNER_ANALOG_TV	     = 2,
-	V4L2_TUNER_DIGITAL_TV	     = 3,
-};
-
-enum v4l2_memory {
-	V4L2_MEMORY_MMAP             = 1,
-	V4L2_MEMORY_USERPTR          = 2,
-	V4L2_MEMORY_OVERLAY          = 3,
-};
-
-/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
-enum v4l2_colorspace {
-	/* ITU-R 601 -- broadcast NTSC/PAL */
-	V4L2_COLORSPACE_SMPTE170M     = 1,
-
-	/* 1125-Line (US) HDTV */
-	V4L2_COLORSPACE_SMPTE240M     = 2,
-
-	/* HD and modern captures. */
-	V4L2_COLORSPACE_REC709        = 3,
-
-	/* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
-	V4L2_COLORSPACE_BT878         = 4,
-
-	/* These should be useful.  Assume 601 extents. */
-	V4L2_COLORSPACE_470_SYSTEM_M  = 5,
-	V4L2_COLORSPACE_470_SYSTEM_BG = 6,
-
-	/* I know there will be cameras that send this.  So, this is
-	 * unspecified chromaticities and full 0-255 on each of the
-	 * Y'CbCr components
-	 */
-	V4L2_COLORSPACE_JPEG          = 7,
-
-	/* For RGB colourspaces, this is probably a good start. */
-	V4L2_COLORSPACE_SRGB          = 8,
-};
-
-enum v4l2_priority {
-	V4L2_PRIORITY_UNSET       = 0,  /* not initialized */
-	V4L2_PRIORITY_BACKGROUND  = 1,
-	V4L2_PRIORITY_INTERACTIVE = 2,
-	V4L2_PRIORITY_RECORD      = 3,
-	V4L2_PRIORITY_DEFAULT     = V4L2_PRIORITY_INTERACTIVE,
-};
-
-struct v4l2_rect {
-	__s32   left;
-	__s32   top;
-	__s32   width;
-	__s32   height;
-};
-
-struct v4l2_fract {
-	__u32   numerator;
-	__u32   denominator;
-};
-
-/**
-  * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP
-  *
-  * @driver:	   name of the driver module (e.g. "bttv")
-  * @card:	   name of the card (e.g. "Hauppauge WinTV")
-  * @bus_info:	   name of the bus (e.g. "PCI:" + pci_name(pci_dev) )
-  * @version:	   KERNEL_VERSION
-  * @capabilities: capabilities of the physical device as a whole
-  * @device_caps:  capabilities accessed via this particular device (node)
-  * @reserved:	   reserved fields for future extensions
-  */
-struct v4l2_capability {
-	__u8	driver[16];
-	__u8	card[32];
-	__u8	bus_info[32];
-	__u32   version;
-	__u32	capabilities;
-	__u32	device_caps;
-	__u32	reserved[3];
-};
-
-/* Values for 'capabilities' field */
-#define V4L2_CAP_VIDEO_CAPTURE		0x00000001  /* Is a video capture device */
-#define V4L2_CAP_VIDEO_OUTPUT		0x00000002  /* Is a video output device */
-#define V4L2_CAP_VIDEO_OVERLAY		0x00000004  /* Can do video overlay */
-#define V4L2_CAP_VBI_CAPTURE		0x00000010  /* Is a raw VBI capture device */
-#define V4L2_CAP_VBI_OUTPUT		0x00000020  /* Is a raw VBI output device */
-#define V4L2_CAP_SLICED_VBI_CAPTURE	0x00000040  /* Is a sliced VBI capture device */
-#define V4L2_CAP_SLICED_VBI_OUTPUT	0x00000080  /* Is a sliced VBI output device */
-#define V4L2_CAP_RDS_CAPTURE		0x00000100  /* RDS data capture */
-#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY	0x00000200  /* Can do video output overlay */
-#define V4L2_CAP_HW_FREQ_SEEK		0x00000400  /* Can do hardware frequency seek  */
-#define V4L2_CAP_RDS_OUTPUT		0x00000800  /* Is an RDS encoder */
-
-/* Is a video capture device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_CAPTURE_MPLANE	0x00001000
-/* Is a video output device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_OUTPUT_MPLANE	0x00002000
-/* Is a video mem-to-mem device that supports multiplanar formats */
-#define V4L2_CAP_VIDEO_M2M_MPLANE	0x00004000
-/* Is a video mem-to-mem device */
-#define V4L2_CAP_VIDEO_M2M		0x00008000
-
-#define V4L2_CAP_TUNER			0x00010000  /* has a tuner */
-#define V4L2_CAP_AUDIO			0x00020000  /* has audio support */
-#define V4L2_CAP_RADIO			0x00040000  /* is a radio device */
-#define V4L2_CAP_MODULATOR		0x00080000  /* has a modulator */
-
-#define V4L2_CAP_READWRITE              0x01000000  /* read/write systemcalls */
-#define V4L2_CAP_ASYNCIO                0x02000000  /* async I/O */
-#define V4L2_CAP_STREAMING              0x04000000  /* streaming I/O ioctls */
-
-#define V4L2_CAP_DEVICE_CAPS            0x80000000  /* sets device capabilities field */
-
-/*
- *	V I D E O   I M A G E   F O R M A T
- */
-struct v4l2_pix_format {
-	__u32         		width;
-	__u32			height;
-	__u32			pixelformat;
-	__u32			field;		/* enum v4l2_field */
-	__u32            	bytesperline;	/* for padding, zero if unused */
-	__u32          		sizeimage;
-	__u32			colorspace;	/* enum v4l2_colorspace */
-	__u32			priv;		/* private data, depends on pixelformat */
-};
-
-/*      Pixel format         FOURCC                          depth  Description  */
-
-/* RGB formats */
-#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R', 'G', 'B', '1') /*  8  RGB-3-3-2     */
-#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R', '4', '4', '4') /* 16  xxxxrrrr ggggbbbb */
-#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R', 'G', 'B', 'O') /* 16  RGB-5-5-5     */
-#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
-#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
-#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
-#define V4L2_PIX_FMT_BGR666  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6	  */
-#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
-#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
-#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
-#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R', 'G', 'B', '4') /* 32  RGB-8-8-8-8   */
-
-/* Grey formats */
-#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
-#define V4L2_PIX_FMT_Y4      v4l2_fourcc('Y', '0', '4', ' ') /*  4  Greyscale     */
-#define V4L2_PIX_FMT_Y6      v4l2_fourcc('Y', '0', '6', ' ') /*  6  Greyscale     */
-#define V4L2_PIX_FMT_Y10     v4l2_fourcc('Y', '1', '0', ' ') /* 10  Greyscale     */
-#define V4L2_PIX_FMT_Y12     v4l2_fourcc('Y', '1', '2', ' ') /* 12  Greyscale     */
-#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
-
-/* Grey bit-packed formats */
-#define V4L2_PIX_FMT_Y10BPACK    v4l2_fourcc('Y', '1', '0', 'B') /* 10  Greyscale bit-packed */
-
-/* Palette formats */
-#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
-
-/* Luminance+Chrominance formats */
-#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y', 'V', 'U', '9') /*  9  YVU 4:1:0     */
-#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y', 'V', '1', '2') /* 12  YVU 4:2:0     */
-#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YVYU    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
-#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_VYUY    v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16  YUV 4:2:2     */
-#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16  YVU422 planar */
-#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16  YVU411 planar */
-#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y', '4', '1', 'P') /* 12  YUV 4:1:1     */
-#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y', '4', '4', '4') /* 16  xxxxyyyy uuuuvvvv */
-#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y', 'U', 'V', 'O') /* 16  YUV-5-5-5     */
-#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y', 'U', 'V', 'P') /* 16  YUV-5-6-5     */
-#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y', 'U', 'V', '4') /* 32  YUV-8-8-8-8   */
-#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y', 'U', 'V', '9') /*  9  YUV 4:1:0     */
-#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
-#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
-#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
-#define V4L2_PIX_FMT_M420    v4l2_fourcc('M', '4', '2', '0') /* 12  YUV 4:2:0 2 lines y, 1 line uv interleaved */
-
-/* two planes -- one Y, one Cr + Cb interleaved  */
-#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
-#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
-#define V4L2_PIX_FMT_NV16    v4l2_fourcc('N', 'V', '1', '6') /* 16  Y/CbCr 4:2:2  */
-#define V4L2_PIX_FMT_NV61    v4l2_fourcc('N', 'V', '6', '1') /* 16  Y/CrCb 4:2:2  */
-#define V4L2_PIX_FMT_NV24    v4l2_fourcc('N', 'V', '2', '4') /* 24  Y/CbCr 4:4:4  */
-#define V4L2_PIX_FMT_NV42    v4l2_fourcc('N', 'V', '4', '2') /* 24  Y/CrCb 4:4:4  */
-
-/* two non contiguous planes - one Y, one Cr + Cb interleaved  */
-#define V4L2_PIX_FMT_NV12M   v4l2_fourcc('N', 'M', '1', '2') /* 12  Y/CbCr 4:2:0  */
-#define V4L2_PIX_FMT_NV21M   v4l2_fourcc('N', 'M', '2', '1') /* 21  Y/CrCb 4:2:0  */
-#define V4L2_PIX_FMT_NV12MT  v4l2_fourcc('T', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 64x32 macroblocks */
-#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 16x16 macroblocks */
-
-/* three non contiguous planes - Y, Cb, Cr */
-#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12  YUV420 planar */
-#define V4L2_PIX_FMT_YVU420M v4l2_fourcc('Y', 'M', '2', '1') /* 12  YVU420 planar */
-
-/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
-#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG8  v4l2_fourcc('G', 'R', 'B', 'G') /*  8  GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB8  v4l2_fourcc('R', 'G', 'G', 'B') /*  8  RGRG.. GBGB.. */
-#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10  GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10  RGRG.. GBGB.. */
-#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12  BGBG.. GRGR.. */
-#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12  GBGB.. RGRG.. */
-#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12  GRGR.. BGBG.. */
-#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12  RGRG.. GBGB.. */
-	/* 10bit raw bayer DPCM compressed to 8 bits */
-#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
-#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
-#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
-#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
-	/*
-	 * 10bit raw bayer, expanded to 16 bits
-	 * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
-	 */
-#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
-
-/* compressed formats */
-#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
-#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
-#define V4L2_PIX_FMT_DV       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
-#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
-#define V4L2_PIX_FMT_H264     v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
-#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
-#define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */
-#define V4L2_PIX_FMT_H263     v4l2_fourcc('H', '2', '6', '3') /* H263          */
-#define V4L2_PIX_FMT_MPEG1    v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES     */
-#define V4L2_PIX_FMT_MPEG2    v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES     */
-#define V4L2_PIX_FMT_MPEG4    v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES     */
-#define V4L2_PIX_FMT_XVID     v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid           */
-#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
-#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
-#define V4L2_PIX_FMT_VP8      v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
-
-/*  Vendor-specific formats   */
-#define V4L2_PIX_FMT_CPIA1    v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
-#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
-#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
-#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
-#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
-#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
-#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
-#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
-#define V4L2_PIX_FMT_SPCA505  v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
-#define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
-#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
-#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
-#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */
-#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
-#define V4L2_PIX_FMT_SQ905C   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
-#define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
-#define V4L2_PIX_FMT_OV511    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
-#define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
-#define V4L2_PIX_FMT_STV0680  v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
-#define V4L2_PIX_FMT_TM6000   v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
-#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
-#define V4L2_PIX_FMT_KONICA420  v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
-#define V4L2_PIX_FMT_JPGL	v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
-#define V4L2_PIX_FMT_SE401      v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
-#define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
-
-/*
- *	F O R M A T   E N U M E R A T I O N
- */
-struct v4l2_fmtdesc {
-	__u32		    index;             /* Format number      */
-	__u32		    type;              /* enum v4l2_buf_type */
-	__u32               flags;
-	__u8		    description[32];   /* Description string */
-	__u32		    pixelformat;       /* Format fourcc      */
-	__u32		    reserved[4];
-};
-
-#define V4L2_FMT_FLAG_COMPRESSED 0x0001
-#define V4L2_FMT_FLAG_EMULATED   0x0002
-
-#if 1
-	/* Experimental Frame Size and frame rate enumeration */
-/*
- *	F R A M E   S I Z E   E N U M E R A T I O N
- */
-enum v4l2_frmsizetypes {
-	V4L2_FRMSIZE_TYPE_DISCRETE	= 1,
-	V4L2_FRMSIZE_TYPE_CONTINUOUS	= 2,
-	V4L2_FRMSIZE_TYPE_STEPWISE	= 3,
-};
-
-struct v4l2_frmsize_discrete {
-	__u32			width;		/* Frame width [pixel] */
-	__u32			height;		/* Frame height [pixel] */
-};
-
-struct v4l2_frmsize_stepwise {
-	__u32			min_width;	/* Minimum frame width [pixel] */
-	__u32			max_width;	/* Maximum frame width [pixel] */
-	__u32			step_width;	/* Frame width step size [pixel] */
-	__u32			min_height;	/* Minimum frame height [pixel] */
-	__u32			max_height;	/* Maximum frame height [pixel] */
-	__u32			step_height;	/* Frame height step size [pixel] */
-};
-
-struct v4l2_frmsizeenum {
-	__u32			index;		/* Frame size number */
-	__u32			pixel_format;	/* Pixel format */
-	__u32			type;		/* Frame size type the device supports. */
-
-	union {					/* Frame size */
-		struct v4l2_frmsize_discrete	discrete;
-		struct v4l2_frmsize_stepwise	stepwise;
-	};
-
-	__u32   reserved[2];			/* Reserved space for future use */
-};
-
-/*
- *	F R A M E   R A T E   E N U M E R A T I O N
- */
-enum v4l2_frmivaltypes {
-	V4L2_FRMIVAL_TYPE_DISCRETE	= 1,
-	V4L2_FRMIVAL_TYPE_CONTINUOUS	= 2,
-	V4L2_FRMIVAL_TYPE_STEPWISE	= 3,
-};
-
-struct v4l2_frmival_stepwise {
-	struct v4l2_fract	min;		/* Minimum frame interval [s] */
-	struct v4l2_fract	max;		/* Maximum frame interval [s] */
-	struct v4l2_fract	step;		/* Frame interval step size [s] */
-};
-
-struct v4l2_frmivalenum {
-	__u32			index;		/* Frame format index */
-	__u32			pixel_format;	/* Pixel format */
-	__u32			width;		/* Frame width */
-	__u32			height;		/* Frame height */
-	__u32			type;		/* Frame interval type the device supports. */
-
-	union {					/* Frame interval */
-		struct v4l2_fract		discrete;
-		struct v4l2_frmival_stepwise	stepwise;
-	};
-
-	__u32	reserved[2];			/* Reserved space for future use */
-};
-#endif
-
-/*
- *	T I M E C O D E
- */
-struct v4l2_timecode {
-	__u32	type;
-	__u32	flags;
-	__u8	frames;
-	__u8	seconds;
-	__u8	minutes;
-	__u8	hours;
-	__u8	userbits[4];
-};
-
-/*  Type  */
-#define V4L2_TC_TYPE_24FPS		1
-#define V4L2_TC_TYPE_25FPS		2
-#define V4L2_TC_TYPE_30FPS		3
-#define V4L2_TC_TYPE_50FPS		4
-#define V4L2_TC_TYPE_60FPS		5
-
-/*  Flags  */
-#define V4L2_TC_FLAG_DROPFRAME		0x0001 /* "drop-frame" mode */
-#define V4L2_TC_FLAG_COLORFRAME		0x0002
-#define V4L2_TC_USERBITS_field		0x000C
-#define V4L2_TC_USERBITS_USERDEFINED	0x0000
-#define V4L2_TC_USERBITS_8BITCHARS	0x0008
-/* The above is based on SMPTE timecodes */
-
-struct v4l2_jpegcompression {
-	int quality;
-
-	int  APPn;              /* Number of APP segment to be written,
-				 * must be 0..15 */
-	int  APP_len;           /* Length of data in JPEG APPn segment */
-	char APP_data[60];      /* Data in the JPEG APPn segment. */
-
-	int  COM_len;           /* Length of data in JPEG COM segment */
-	char COM_data[60];      /* Data in JPEG COM segment */
-
-	__u32 jpeg_markers;     /* Which markers should go into the JPEG
-				 * output. Unless you exactly know what
-				 * you do, leave them untouched.
-				 * Inluding less markers will make the
-				 * resulting code smaller, but there will
-				 * be fewer applications which can read it.
-				 * The presence of the APP and COM marker
-				 * is influenced by APP_len and COM_len
-				 * ONLY, not by this property! */
-
-#define V4L2_JPEG_MARKER_DHT (1<<3)    /* Define Huffman Tables */
-#define V4L2_JPEG_MARKER_DQT (1<<4)    /* Define Quantization Tables */
-#define V4L2_JPEG_MARKER_DRI (1<<5)    /* Define Restart Interval */
-#define V4L2_JPEG_MARKER_COM (1<<6)    /* Comment segment */
-#define V4L2_JPEG_MARKER_APP (1<<7)    /* App segment, driver will
-					* allways use APP0 */
-};
-
-/*
- *	M E M O R Y - M A P P I N G   B U F F E R S
- */
-struct v4l2_requestbuffers {
-	__u32			count;
-	__u32			type;		/* enum v4l2_buf_type */
-	__u32			memory;		/* enum v4l2_memory */
-	__u32			reserved[2];
-};
-
-/**
- * struct v4l2_plane - plane info for multi-planar buffers
- * @bytesused:		number of bytes occupied by data in the plane (payload)
- * @length:		size of this plane (NOT the payload) in bytes
- * @mem_offset:		when memory in the associated struct v4l2_buffer is
- *			V4L2_MEMORY_MMAP, equals the offset from the start of
- *			the device memory for this plane (or is a "cookie" that
- *			should be passed to mmap() called on the video node)
- * @userptr:		when memory is V4L2_MEMORY_USERPTR, a userspace pointer
- *			pointing to this plane
- * @data_offset:	offset in the plane to the start of data; usually 0,
- *			unless there is a header in front of the data
- *
- * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
- * with two planes can have one plane for Y, and another for interleaved CbCr
- * components. Each plane can reside in a separate memory buffer, or even in
- * a completely separate memory node (e.g. in embedded devices).
- */
-struct v4l2_plane {
-	__u32			bytesused;
-	__u32			length;
-	union {
-		__u32		mem_offset;
-		unsigned long	userptr;
-	} m;
-	__u32			data_offset;
-	__u32			reserved[11];
-};
-
-/**
- * struct v4l2_buffer - video buffer info
- * @index:	id number of the buffer
- * @type:	enum v4l2_buf_type; buffer type (type == *_MPLANE for
- *		multiplanar buffers);
- * @bytesused:	number of bytes occupied by data in the buffer (payload);
- *		unused (set to 0) for multiplanar buffers
- * @flags:	buffer informational flags
- * @field:	enum v4l2_field; field order of the image in the buffer
- * @timestamp:	frame timestamp
- * @timecode:	frame timecode
- * @sequence:	sequence count of this frame
- * @memory:	enum v4l2_memory; the method, in which the actual video data is
- *		passed
- * @offset:	for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP;
- *		offset from the start of the device memory for this plane,
- *		(or a "cookie" that should be passed to mmap() as offset)
- * @userptr:	for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR;
- *		a userspace pointer pointing to this buffer
- * @planes:	for multiplanar buffers; userspace pointer to the array of plane
- *		info structs for this buffer
- * @length:	size in bytes of the buffer (NOT its payload) for single-plane
- *		buffers (when type != *_MPLANE); number of elements in the
- *		planes array for multi-plane buffers
- * @input:	input number from which the video data has has been captured
- *
- * Contains data exchanged by application and driver using one of the Streaming
- * I/O methods.
- */
-struct v4l2_buffer {
-	__u32			index;
-	__u32			type;
-	__u32			bytesused;
-	__u32			flags;
-	__u32			field;
-	struct timeval		timestamp;
-	struct v4l2_timecode	timecode;
-	__u32			sequence;
-
-	/* memory location */
-	__u32			memory;
-	union {
-		__u32           offset;
-		unsigned long   userptr;
-		struct v4l2_plane *planes;
-	} m;
-	__u32			length;
-	__u32			reserved2;
-	__u32			reserved;
-};
-
-/*  Flags for 'flags' field */
-#define V4L2_BUF_FLAG_MAPPED	0x0001  /* Buffer is mapped (flag) */
-#define V4L2_BUF_FLAG_QUEUED	0x0002	/* Buffer is queued for processing */
-#define V4L2_BUF_FLAG_DONE	0x0004	/* Buffer is ready */
-#define V4L2_BUF_FLAG_KEYFRAME	0x0008	/* Image is a keyframe (I-frame) */
-#define V4L2_BUF_FLAG_PFRAME	0x0010	/* Image is a P-frame */
-#define V4L2_BUF_FLAG_BFRAME	0x0020	/* Image is a B-frame */
-/* Buffer is ready, but the data contained within is corrupted. */
-#define V4L2_BUF_FLAG_ERROR	0x0040
-#define V4L2_BUF_FLAG_TIMECODE	0x0100	/* timecode field is valid */
-#define V4L2_BUF_FLAG_PREPARED	0x0400	/* Buffer is prepared for queuing */
-/* Cache handling flags */
-#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE	0x0800
-#define V4L2_BUF_FLAG_NO_CACHE_CLEAN		0x1000
-
-/*
- *	O V E R L A Y   P R E V I E W
- */
-struct v4l2_framebuffer {
-	__u32			capability;
-	__u32			flags;
-/* FIXME: in theory we should pass something like PCI device + memory
- * region + offset instead of some physical address */
-	void                    *base;
-	struct v4l2_pix_format	fmt;
-};
-/*  Flags for the 'capability' field. Read only */
-#define V4L2_FBUF_CAP_EXTERNOVERLAY	0x0001
-#define V4L2_FBUF_CAP_CHROMAKEY		0x0002
-#define V4L2_FBUF_CAP_LIST_CLIPPING     0x0004
-#define V4L2_FBUF_CAP_BITMAP_CLIPPING	0x0008
-#define V4L2_FBUF_CAP_LOCAL_ALPHA	0x0010
-#define V4L2_FBUF_CAP_GLOBAL_ALPHA	0x0020
-#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA	0x0040
-#define V4L2_FBUF_CAP_SRC_CHROMAKEY	0x0080
-/*  Flags for the 'flags' field. */
-#define V4L2_FBUF_FLAG_PRIMARY		0x0001
-#define V4L2_FBUF_FLAG_OVERLAY		0x0002
-#define V4L2_FBUF_FLAG_CHROMAKEY	0x0004
-#define V4L2_FBUF_FLAG_LOCAL_ALPHA	0x0008
-#define V4L2_FBUF_FLAG_GLOBAL_ALPHA	0x0010
-#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA	0x0020
-#define V4L2_FBUF_FLAG_SRC_CHROMAKEY	0x0040
-
-struct v4l2_clip {
-	struct v4l2_rect        c;
-	struct v4l2_clip	__user *next;
-};
-
-struct v4l2_window {
-	struct v4l2_rect        w;
-	__u32			field;	 /* enum v4l2_field */
-	__u32			chromakey;
-	struct v4l2_clip	__user *clips;
-	__u32			clipcount;
-	void			__user *bitmap;
-	__u8                    global_alpha;
-};
-
-/*
- *	C A P T U R E   P A R A M E T E R S
- */
-struct v4l2_captureparm {
-	__u32		   capability;	  /*  Supported modes */
-	__u32		   capturemode;	  /*  Current mode */
-	struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
-	__u32		   extendedmode;  /*  Driver-specific extensions */
-	__u32              readbuffers;   /*  # of buffers for read */
-	__u32		   reserved[4];
-};
-
-/*  Flags for 'capability' and 'capturemode' fields */
-#define V4L2_MODE_HIGHQUALITY	0x0001	/*  High quality imaging mode */
-#define V4L2_CAP_TIMEPERFRAME	0x1000	/*  timeperframe field is supported */
-
-struct v4l2_outputparm {
-	__u32		   capability;	 /*  Supported modes */
-	__u32		   outputmode;	 /*  Current mode */
-	struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
-	__u32		   extendedmode; /*  Driver-specific extensions */
-	__u32              writebuffers; /*  # of buffers for write */
-	__u32		   reserved[4];
-};
-
-/*
- *	I N P U T   I M A G E   C R O P P I N G
- */
-struct v4l2_cropcap {
-	__u32			type;	/* enum v4l2_buf_type */
-	struct v4l2_rect        bounds;
-	struct v4l2_rect        defrect;
-	struct v4l2_fract       pixelaspect;
-};
-
-struct v4l2_crop {
-	__u32			type;	/* enum v4l2_buf_type */
-	struct v4l2_rect        c;
-};
-
-/**
- * struct v4l2_selection - selection info
- * @type:	buffer type (do not use *_MPLANE types)
- * @target:	Selection target, used to choose one of possible rectangles;
- *		defined in v4l2-common.h; V4L2_SEL_TGT_* .
- * @flags:	constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*.
- * @r:		coordinates of selection window
- * @reserved:	for future use, rounds structure size to 64 bytes, set to zero
- *
- * Hardware may use multiple helper windows to process a video stream.
- * The structure is used to exchange this selection areas between
- * an application and a driver.
- */
-struct v4l2_selection {
-	__u32			type;
-	__u32			target;
-	__u32                   flags;
-	struct v4l2_rect        r;
-	__u32                   reserved[9];
-};
-
-
-/*
- *      A N A L O G   V I D E O   S T A N D A R D
- */
-
-typedef __u64 v4l2_std_id;
-
-/* one bit for each */
-#define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
-#define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
-#define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
-#define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
-#define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
-#define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
-#define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
-#define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)
-
-#define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
-#define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
-#define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
-#define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)
-
-#define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)	/* BTSC */
-#define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)	/* EIA-J */
-#define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
-#define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)	/* FM A2 */
-
-#define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
-#define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
-#define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
-#define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
-#define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
-#define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
-#define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
-#define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)
-
-/* ATSC/HDTV */
-#define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
-#define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
-
-/* FIXME:
-   Although std_id is 64 bits, there is an issue on PPC32 architecture that
-   makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
-   this value to 32 bits.
-   As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
-   it should work fine. However, if needed to add more than two standards,
-   v4l2-common.c should be fixed.
- */
-
-/*
- * Some macros to merge video standards in order to make live easier for the
- * drivers and V4L2 applications
- */
-
-/*
- * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is
- * Missing here.
- */
-#define V4L2_STD_NTSC           (V4L2_STD_NTSC_M	|\
-				 V4L2_STD_NTSC_M_JP     |\
-				 V4L2_STD_NTSC_M_KR)
-/* Secam macros */
-#define V4L2_STD_SECAM_DK      	(V4L2_STD_SECAM_D	|\
-				 V4L2_STD_SECAM_K	|\
-				 V4L2_STD_SECAM_K1)
-/* All Secam Standards */
-#define V4L2_STD_SECAM		(V4L2_STD_SECAM_B	|\
-				 V4L2_STD_SECAM_G	|\
-				 V4L2_STD_SECAM_H	|\
-				 V4L2_STD_SECAM_DK	|\
-				 V4L2_STD_SECAM_L       |\
-				 V4L2_STD_SECAM_LC)
-/* PAL macros */
-#define V4L2_STD_PAL_BG		(V4L2_STD_PAL_B		|\
-				 V4L2_STD_PAL_B1	|\
-				 V4L2_STD_PAL_G)
-#define V4L2_STD_PAL_DK		(V4L2_STD_PAL_D		|\
-				 V4L2_STD_PAL_D1	|\
-				 V4L2_STD_PAL_K)
-/*
- * "Common" PAL - This macro is there to be compatible with the old
- * V4L1 concept of "PAL": /BGDKHI.
- * Several PAL standards are mising here: /M, /N and /Nc
- */
-#define V4L2_STD_PAL		(V4L2_STD_PAL_BG	|\
-				 V4L2_STD_PAL_DK	|\
-				 V4L2_STD_PAL_H		|\
-				 V4L2_STD_PAL_I)
-/* Chroma "agnostic" standards */
-#define V4L2_STD_B		(V4L2_STD_PAL_B		|\
-				 V4L2_STD_PAL_B1	|\
-				 V4L2_STD_SECAM_B)
-#define V4L2_STD_G		(V4L2_STD_PAL_G		|\
-				 V4L2_STD_SECAM_G)
-#define V4L2_STD_H		(V4L2_STD_PAL_H		|\
-				 V4L2_STD_SECAM_H)
-#define V4L2_STD_L		(V4L2_STD_SECAM_L	|\
-				 V4L2_STD_SECAM_LC)
-#define V4L2_STD_GH		(V4L2_STD_G		|\
-				 V4L2_STD_H)
-#define V4L2_STD_DK		(V4L2_STD_PAL_DK	|\
-				 V4L2_STD_SECAM_DK)
-#define V4L2_STD_BG		(V4L2_STD_B		|\
-				 V4L2_STD_G)
-#define V4L2_STD_MN		(V4L2_STD_PAL_M		|\
-				 V4L2_STD_PAL_N		|\
-				 V4L2_STD_PAL_Nc	|\
-				 V4L2_STD_NTSC)
-
-/* Standards where MTS/BTSC stereo could be found */
-#define V4L2_STD_MTS		(V4L2_STD_NTSC_M	|\
-				 V4L2_STD_PAL_M		|\
-				 V4L2_STD_PAL_N		|\
-				 V4L2_STD_PAL_Nc)
-
-/* Standards for Countries with 60Hz Line frequency */
-#define V4L2_STD_525_60		(V4L2_STD_PAL_M		|\
-				 V4L2_STD_PAL_60	|\
-				 V4L2_STD_NTSC		|\
-				 V4L2_STD_NTSC_443)
-/* Standards for Countries with 50Hz Line frequency */
-#define V4L2_STD_625_50		(V4L2_STD_PAL		|\
-				 V4L2_STD_PAL_N		|\
-				 V4L2_STD_PAL_Nc	|\
-				 V4L2_STD_SECAM)
-
-#define V4L2_STD_ATSC           (V4L2_STD_ATSC_8_VSB    |\
-				 V4L2_STD_ATSC_16_VSB)
-/* Macros with none and all analog standards */
-#define V4L2_STD_UNKNOWN        0
-#define V4L2_STD_ALL            (V4L2_STD_525_60	|\
-				 V4L2_STD_625_50)
-
-struct v4l2_standard {
-	__u32		     index;
-	v4l2_std_id          id;
-	__u8		     name[24];
-	struct v4l2_fract    frameperiod; /* Frames, not fields */
-	__u32		     framelines;
-	__u32		     reserved[4];
-};
-
-/* The DV Preset API is deprecated in favor of the DV Timings API.
-   New drivers shouldn't use this anymore! */
-
-/*
- *	V I D E O	T I M I N G S	D V	P R E S E T
- */
-struct v4l2_dv_preset {
-	__u32	preset;
-	__u32	reserved[4];
-};
-
-/*
- *	D V	P R E S E T S	E N U M E R A T I O N
- */
-struct v4l2_dv_enum_preset {
-	__u32	index;
-	__u32	preset;
-	__u8	name[32]; /* Name of the preset timing */
-	__u32	width;
-	__u32	height;
-	__u32	reserved[4];
-};
-
-/*
- * 	D V	P R E S E T	V A L U E S
- */
-#define		V4L2_DV_INVALID		0
-#define		V4L2_DV_480P59_94	1 /* BT.1362 */
-#define		V4L2_DV_576P50		2 /* BT.1362 */
-#define		V4L2_DV_720P24		3 /* SMPTE 296M */
-#define		V4L2_DV_720P25		4 /* SMPTE 296M */
-#define		V4L2_DV_720P30		5 /* SMPTE 296M */
-#define		V4L2_DV_720P50		6 /* SMPTE 296M */
-#define		V4L2_DV_720P59_94	7 /* SMPTE 274M */
-#define		V4L2_DV_720P60		8 /* SMPTE 274M/296M */
-#define		V4L2_DV_1080I29_97	9 /* BT.1120/ SMPTE 274M */
-#define		V4L2_DV_1080I30		10 /* BT.1120/ SMPTE 274M */
-#define		V4L2_DV_1080I25		11 /* BT.1120 */
-#define		V4L2_DV_1080I50		12 /* SMPTE 296M */
-#define		V4L2_DV_1080I60		13 /* SMPTE 296M */
-#define		V4L2_DV_1080P24		14 /* SMPTE 296M */
-#define		V4L2_DV_1080P25		15 /* SMPTE 296M */
-#define		V4L2_DV_1080P30		16 /* SMPTE 296M */
-#define		V4L2_DV_1080P50		17 /* BT.1120 */
-#define		V4L2_DV_1080P60		18 /* BT.1120 */
-
-/*
- *	D V 	B T	T I M I N G S
- */
-
-/** struct v4l2_bt_timings - BT.656/BT.1120 timing data
- * @width:	total width of the active video in pixels
- * @height:	total height of the active video in lines
- * @interlaced:	Interlaced or progressive
- * @polarities:	Positive or negative polarities
- * @pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @hfrontporch:Horizontal front porch in pixels
- * @hsync:	Horizontal Sync length in pixels
- * @hbackporch:	Horizontal back porch in pixels
- * @vfrontporch:Vertical front porch in lines
- * @vsync:	Vertical Sync length in lines
- * @vbackporch:	Vertical back porch in lines
- * @il_vfrontporch:Vertical front porch for the even field
- *		(aka field 2) of interlaced field formats
- * @il_vsync:	Vertical Sync length for the even field
- *		(aka field 2) of interlaced field formats
- * @il_vbackporch:Vertical back porch for the even field
- *		(aka field 2) of interlaced field formats
- * @standards:	Standards the timing belongs to
- * @flags:	Flags
- * @reserved:	Reserved fields, must be zeroed.
- *
- * A note regarding vertical interlaced timings: height refers to the total
- * height of the active video frame (= two fields). The blanking timings refer
- * to the blanking of each field. So the height of the total frame is
- * calculated as follows:
- *
- * tot_height = height + vfrontporch + vsync + vbackporch +
- *                       il_vfrontporch + il_vsync + il_vbackporch
- *
- * The active height of each field is height / 2.
- */
-struct v4l2_bt_timings {
-	__u32	width;
-	__u32	height;
-	__u32	interlaced;
-	__u32	polarities;
-	__u64	pixelclock;
-	__u32	hfrontporch;
-	__u32	hsync;
-	__u32	hbackporch;
-	__u32	vfrontporch;
-	__u32	vsync;
-	__u32	vbackporch;
-	__u32	il_vfrontporch;
-	__u32	il_vsync;
-	__u32	il_vbackporch;
-	__u32	standards;
-	__u32	flags;
-	__u32	reserved[14];
-} __attribute__ ((packed));
-
-/* Interlaced or progressive format */
-#define	V4L2_DV_PROGRESSIVE	0
-#define	V4L2_DV_INTERLACED	1
-
-/* Polarities. If bit is not set, it is assumed to be negative polarity */
-#define V4L2_DV_VSYNC_POS_POL	0x00000001
-#define V4L2_DV_HSYNC_POS_POL	0x00000002
-
-/* Timings standards */
-#define V4L2_DV_BT_STD_CEA861	(1 << 0)  /* CEA-861 Digital TV Profile */
-#define V4L2_DV_BT_STD_DMT	(1 << 1)  /* VESA Discrete Monitor Timings */
-#define V4L2_DV_BT_STD_CVT	(1 << 2)  /* VESA Coordinated Video Timings */
-#define V4L2_DV_BT_STD_GTF	(1 << 3)  /* VESA Generalized Timings Formula */
-
-/* Flags */
-
-/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
-   GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
-   intervals are reduced, allowing a higher resolution over the same
-   bandwidth. This is a read-only flag. */
-#define V4L2_DV_FL_REDUCED_BLANKING		(1 << 0)
-/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
-   of six. These formats can be optionally played at 1 / 1.001 speed.
-   This is a read-only flag. */
-#define V4L2_DV_FL_CAN_REDUCE_FPS		(1 << 1)
-/* CEA-861 specific: only valid for video transmitters, the flag is cleared
-   by receivers.
-   If the framerate of the format is a multiple of six, then the pixelclock
-   used to set up the transmitter is divided by 1.001 to make it compatible
-   with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
-   29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
-   such frequencies, then the flag will also be cleared. */
-#define V4L2_DV_FL_REDUCED_FPS			(1 << 2)
-/* Specific to interlaced formats: if set, then field 1 is really one half-line
-   longer and field 2 is really one half-line shorter, so each field has
-   exactly the same number of half-lines. Whether half-lines can be detected
-   or used depends on the hardware. */
-#define V4L2_DV_FL_HALF_LINE			(1 << 0)
-
-
-/** struct v4l2_dv_timings - DV timings
- * @type:	the type of the timings
- * @bt:	BT656/1120 timings
- */
-struct v4l2_dv_timings {
-	__u32 type;
-	union {
-		struct v4l2_bt_timings	bt;
-		__u32	reserved[32];
-	};
-} __attribute__ ((packed));
-
-/* Values for the type field */
-#define V4L2_DV_BT_656_1120	0	/* BT.656/1120 timing type */
-
-
-/** struct v4l2_enum_dv_timings - DV timings enumeration
- * @index:	enumeration index
- * @reserved:	must be zeroed
- * @timings:	the timings for the given index
- */
-struct v4l2_enum_dv_timings {
-	__u32 index;
-	__u32 reserved[3];
-	struct v4l2_dv_timings timings;
-};
-
-/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities
- * @min_width:		width in pixels
- * @max_width:		width in pixels
- * @min_height:		height in lines
- * @max_height:		height in lines
- * @min_pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @max_pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
- * @standards:		Supported standards
- * @capabilities:	Supported capabilities
- * @reserved:		Must be zeroed
- */
-struct v4l2_bt_timings_cap {
-	__u32	min_width;
-	__u32	max_width;
-	__u32	min_height;
-	__u32	max_height;
-	__u64	min_pixelclock;
-	__u64	max_pixelclock;
-	__u32	standards;
-	__u32	capabilities;
-	__u32	reserved[16];
-} __attribute__ ((packed));
-
-/* Supports interlaced formats */
-#define V4L2_DV_BT_CAP_INTERLACED	(1 << 0)
-/* Supports progressive formats */
-#define V4L2_DV_BT_CAP_PROGRESSIVE	(1 << 1)
-/* Supports CVT/GTF reduced blanking */
-#define V4L2_DV_BT_CAP_REDUCED_BLANKING	(1 << 2)
-/* Supports custom formats */
-#define V4L2_DV_BT_CAP_CUSTOM		(1 << 3)
-
-/** struct v4l2_dv_timings_cap - DV timings capabilities
- * @type:	the type of the timings (same as in struct v4l2_dv_timings)
- * @bt:		the BT656/1120 timings capabilities
- */
-struct v4l2_dv_timings_cap {
-	__u32 type;
-	__u32 reserved[3];
-	union {
-		struct v4l2_bt_timings_cap bt;
-		__u32 raw_data[32];
-	};
-};
-
-
-/*
- *	V I D E O   I N P U T S
- */
-struct v4l2_input {
-	__u32	     index;		/*  Which input */
-	__u8	     name[32];		/*  Label */
-	__u32	     type;		/*  Type of input */
-	__u32	     audioset;		/*  Associated audios (bitfield) */
-	__u32        tuner;             /*  enum v4l2_tuner_type */
-	v4l2_std_id  std;
-	__u32	     status;
-	__u32	     capabilities;
-	__u32	     reserved[3];
-};
-
-/*  Values for the 'type' field */
-#define V4L2_INPUT_TYPE_TUNER		1
-#define V4L2_INPUT_TYPE_CAMERA		2
-
-/* field 'status' - general */
-#define V4L2_IN_ST_NO_POWER    0x00000001  /* Attached device is off */
-#define V4L2_IN_ST_NO_SIGNAL   0x00000002
-#define V4L2_IN_ST_NO_COLOR    0x00000004
-
-/* field 'status' - sensor orientation */
-/* If sensor is mounted upside down set both bits */
-#define V4L2_IN_ST_HFLIP       0x00000010 /* Frames are flipped horizontally */
-#define V4L2_IN_ST_VFLIP       0x00000020 /* Frames are flipped vertically */
-
-/* field 'status' - analog */
-#define V4L2_IN_ST_NO_H_LOCK   0x00000100  /* No horizontal sync lock */
-#define V4L2_IN_ST_COLOR_KILL  0x00000200  /* Color killer is active */
-
-/* field 'status' - digital */
-#define V4L2_IN_ST_NO_SYNC     0x00010000  /* No synchronization lock */
-#define V4L2_IN_ST_NO_EQU      0x00020000  /* No equalizer lock */
-#define V4L2_IN_ST_NO_CARRIER  0x00040000  /* Carrier recovery failed */
-
-/* field 'status' - VCR and set-top box */
-#define V4L2_IN_ST_MACROVISION 0x01000000  /* Macrovision detected */
-#define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
-#define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */
-
-/* capabilities flags */
-#define V4L2_IN_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_IN_CAP_DV_TIMINGS		0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_IN_CAP_CUSTOM_TIMINGS	V4L2_IN_CAP_DV_TIMINGS /* For compatibility */
-#define V4L2_IN_CAP_STD			0x00000004 /* Supports S_STD */
-
-/*
- *	V I D E O   O U T P U T S
- */
-struct v4l2_output {
-	__u32	     index;		/*  Which output */
-	__u8	     name[32];		/*  Label */
-	__u32	     type;		/*  Type of output */
-	__u32	     audioset;		/*  Associated audios (bitfield) */
-	__u32	     modulator;         /*  Associated modulator */
-	v4l2_std_id  std;
-	__u32	     capabilities;
-	__u32	     reserved[3];
-};
-/*  Values for the 'type' field */
-#define V4L2_OUTPUT_TYPE_MODULATOR		1
-#define V4L2_OUTPUT_TYPE_ANALOG			2
-#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY	3
-
-/* capabilities flags */
-#define V4L2_OUT_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
-#define V4L2_OUT_CAP_DV_TIMINGS		0x00000002 /* Supports S_DV_TIMINGS */
-#define V4L2_OUT_CAP_CUSTOM_TIMINGS	V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */
-#define V4L2_OUT_CAP_STD		0x00000004 /* Supports S_STD */
-
-/*
- *	C O N T R O L S
- */
-struct v4l2_control {
-	__u32		     id;
-	__s32		     value;
-};
-
-struct v4l2_ext_control {
-	__u32 id;
-	__u32 size;
-	__u32 reserved2[1];
-	union {
-		__s32 value;
-		__s64 value64;
-		char *string;
-	};
-} __attribute__ ((packed));
-
-struct v4l2_ext_controls {
-	__u32 ctrl_class;
-	__u32 count;
-	__u32 error_idx;
-	__u32 reserved[2];
-	struct v4l2_ext_control *controls;
-};
-
-#define V4L2_CTRL_ID_MASK      	  (0x0fffffff)
-#define V4L2_CTRL_ID2CLASS(id)    ((id) & 0x0fff0000UL)
-#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
-
-enum v4l2_ctrl_type {
-	V4L2_CTRL_TYPE_INTEGER	     = 1,
-	V4L2_CTRL_TYPE_BOOLEAN	     = 2,
-	V4L2_CTRL_TYPE_MENU	     = 3,
-	V4L2_CTRL_TYPE_BUTTON	     = 4,
-	V4L2_CTRL_TYPE_INTEGER64     = 5,
-	V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
-	V4L2_CTRL_TYPE_STRING        = 7,
-	V4L2_CTRL_TYPE_BITMASK       = 8,
-	V4L2_CTRL_TYPE_INTEGER_MENU = 9,
-};
-
-/*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
-struct v4l2_queryctrl {
-	__u32		     id;
-	__u32		     type;	/* enum v4l2_ctrl_type */
-	__u8		     name[32];	/* Whatever */
-	__s32		     minimum;	/* Note signedness */
-	__s32		     maximum;
-	__s32		     step;
-	__s32		     default_value;
-	__u32                flags;
-	__u32		     reserved[2];
-};
-
-/*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
-struct v4l2_querymenu {
-	__u32		id;
-	__u32		index;
-	union {
-		__u8	name[32];	/* Whatever */
-		__s64	value;
-	};
-	__u32		reserved;
-} __attribute__ ((packed));
-
-/*  Control flags  */
-#define V4L2_CTRL_FLAG_DISABLED		0x0001
-#define V4L2_CTRL_FLAG_GRABBED		0x0002
-#define V4L2_CTRL_FLAG_READ_ONLY 	0x0004
-#define V4L2_CTRL_FLAG_UPDATE 		0x0008
-#define V4L2_CTRL_FLAG_INACTIVE 	0x0010
-#define V4L2_CTRL_FLAG_SLIDER 		0x0020
-#define V4L2_CTRL_FLAG_WRITE_ONLY 	0x0040
-#define V4L2_CTRL_FLAG_VOLATILE		0x0080
-
-/*  Query flag, to be ORed with the control ID */
-#define V4L2_CTRL_FLAG_NEXT_CTRL	0x80000000
-
-/*  User-class control IDs defined by V4L2 */
-#define V4L2_CID_MAX_CTRLS		1024
-/*  IDs reserved for driver specific controls */
-#define V4L2_CID_PRIVATE_BASE		0x08000000
-
-
-/*  DV-class control IDs defined by V4L2 */
-#define V4L2_CID_DV_CLASS_BASE			(V4L2_CTRL_CLASS_DV | 0x900)
-#define V4L2_CID_DV_CLASS			(V4L2_CTRL_CLASS_DV | 1)
-
-#define	V4L2_CID_DV_TX_HOTPLUG			(V4L2_CID_DV_CLASS_BASE + 1)
-#define	V4L2_CID_DV_TX_RXSENSE			(V4L2_CID_DV_CLASS_BASE + 2)
-#define	V4L2_CID_DV_TX_EDID_PRESENT		(V4L2_CID_DV_CLASS_BASE + 3)
-#define	V4L2_CID_DV_TX_MODE			(V4L2_CID_DV_CLASS_BASE + 4)
-enum v4l2_dv_tx_mode {
-	V4L2_DV_TX_MODE_DVI_D	= 0,
-	V4L2_DV_TX_MODE_HDMI	= 1,
-};
-#define V4L2_CID_DV_TX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 5)
-enum v4l2_dv_rgb_range {
-	V4L2_DV_RGB_RANGE_AUTO	  = 0,
-	V4L2_DV_RGB_RANGE_LIMITED = 1,
-	V4L2_DV_RGB_RANGE_FULL	  = 2,
-};
-
-#define	V4L2_CID_DV_RX_POWER_PRESENT		(V4L2_CID_DV_CLASS_BASE + 100)
-#define V4L2_CID_DV_RX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 101)
-
-/*
- *	T U N I N G
- */
-struct v4l2_tuner {
-	__u32                   index;
-	__u8			name[32];
-	__u32			type;	/* enum v4l2_tuner_type */
-	__u32			capability;
-	__u32			rangelow;
-	__u32			rangehigh;
-	__u32			rxsubchans;
-	__u32			audmode;
-	__s32			signal;
-	__s32			afc;
-	__u32			reserved[4];
-};
-
-struct v4l2_modulator {
-	__u32			index;
-	__u8			name[32];
-	__u32			capability;
-	__u32			rangelow;
-	__u32			rangehigh;
-	__u32			txsubchans;
-	__u32			reserved[4];
-};
-
-/*  Flags for the 'capability' field */
-#define V4L2_TUNER_CAP_LOW		0x0001
-#define V4L2_TUNER_CAP_NORM		0x0002
-#define V4L2_TUNER_CAP_HWSEEK_BOUNDED	0x0004
-#define V4L2_TUNER_CAP_HWSEEK_WRAP	0x0008
-#define V4L2_TUNER_CAP_STEREO		0x0010
-#define V4L2_TUNER_CAP_LANG2		0x0020
-#define V4L2_TUNER_CAP_SAP		0x0020
-#define V4L2_TUNER_CAP_LANG1		0x0040
-#define V4L2_TUNER_CAP_RDS		0x0080
-#define V4L2_TUNER_CAP_RDS_BLOCK_IO	0x0100
-#define V4L2_TUNER_CAP_RDS_CONTROLS	0x0200
-#define V4L2_TUNER_CAP_FREQ_BANDS	0x0400
-#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM	0x0800
-
-/*  Flags for the 'rxsubchans' field */
-#define V4L2_TUNER_SUB_MONO		0x0001
-#define V4L2_TUNER_SUB_STEREO		0x0002
-#define V4L2_TUNER_SUB_LANG2		0x0004
-#define V4L2_TUNER_SUB_SAP		0x0004
-#define V4L2_TUNER_SUB_LANG1		0x0008
-#define V4L2_TUNER_SUB_RDS		0x0010
-
-/*  Values for the 'audmode' field */
-#define V4L2_TUNER_MODE_MONO		0x0000
-#define V4L2_TUNER_MODE_STEREO		0x0001
-#define V4L2_TUNER_MODE_LANG2		0x0002
-#define V4L2_TUNER_MODE_SAP		0x0002
-#define V4L2_TUNER_MODE_LANG1		0x0003
-#define V4L2_TUNER_MODE_LANG1_LANG2	0x0004
-
-struct v4l2_frequency {
-	__u32	tuner;
-	__u32	type;	/* enum v4l2_tuner_type */
-	__u32	frequency;
-	__u32	reserved[8];
-};
-
-#define V4L2_BAND_MODULATION_VSB	(1 << 1)
-#define V4L2_BAND_MODULATION_FM		(1 << 2)
-#define V4L2_BAND_MODULATION_AM		(1 << 3)
-
-struct v4l2_frequency_band {
-	__u32	tuner;
-	__u32	type;	/* enum v4l2_tuner_type */
-	__u32	index;
-	__u32	capability;
-	__u32	rangelow;
-	__u32	rangehigh;
-	__u32	modulation;
-	__u32	reserved[9];
-};
-
-struct v4l2_hw_freq_seek {
-	__u32	tuner;
-	__u32	type;	/* enum v4l2_tuner_type */
-	__u32	seek_upward;
-	__u32	wrap_around;
-	__u32	spacing;
-	__u32	rangelow;
-	__u32	rangehigh;
-	__u32	reserved[5];
-};
-
-/*
- *	R D S
- */
-
-struct v4l2_rds_data {
-	__u8 	lsb;
-	__u8 	msb;
-	__u8 	block;
-} __attribute__ ((packed));
-
-#define V4L2_RDS_BLOCK_MSK 	 0x7
-#define V4L2_RDS_BLOCK_A 	 0
-#define V4L2_RDS_BLOCK_B 	 1
-#define V4L2_RDS_BLOCK_C 	 2
-#define V4L2_RDS_BLOCK_D 	 3
-#define V4L2_RDS_BLOCK_C_ALT 	 4
-#define V4L2_RDS_BLOCK_INVALID 	 7
-
-#define V4L2_RDS_BLOCK_CORRECTED 0x40
-#define V4L2_RDS_BLOCK_ERROR 	 0x80
-
-/*
- *	A U D I O
- */
-struct v4l2_audio {
-	__u32	index;
-	__u8	name[32];
-	__u32	capability;
-	__u32	mode;
-	__u32	reserved[2];
-};
-
-/*  Flags for the 'capability' field */
-#define V4L2_AUDCAP_STEREO		0x00001
-#define V4L2_AUDCAP_AVL			0x00002
-
-/*  Flags for the 'mode' field */
-#define V4L2_AUDMODE_AVL		0x00001
-
-struct v4l2_audioout {
-	__u32	index;
-	__u8	name[32];
-	__u32	capability;
-	__u32	mode;
-	__u32	reserved[2];
-};
-
-/*
- *	M P E G   S E R V I C E S
- *
- *	NOTE: EXPERIMENTAL API
- */
-#if 1
-#define V4L2_ENC_IDX_FRAME_I    (0)
-#define V4L2_ENC_IDX_FRAME_P    (1)
-#define V4L2_ENC_IDX_FRAME_B    (2)
-#define V4L2_ENC_IDX_FRAME_MASK (0xf)
-
-struct v4l2_enc_idx_entry {
-	__u64 offset;
-	__u64 pts;
-	__u32 length;
-	__u32 flags;
-	__u32 reserved[2];
-};
-
-#define V4L2_ENC_IDX_ENTRIES (64)
-struct v4l2_enc_idx {
-	__u32 entries;
-	__u32 entries_cap;
-	__u32 reserved[4];
-	struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES];
-};
-
-
-#define V4L2_ENC_CMD_START      (0)
-#define V4L2_ENC_CMD_STOP       (1)
-#define V4L2_ENC_CMD_PAUSE      (2)
-#define V4L2_ENC_CMD_RESUME     (3)
-
-/* Flags for V4L2_ENC_CMD_STOP */
-#define V4L2_ENC_CMD_STOP_AT_GOP_END    (1 << 0)
-
-struct v4l2_encoder_cmd {
-	__u32 cmd;
-	__u32 flags;
-	union {
-		struct {
-			__u32 data[8];
-		} raw;
-	};
-};
-
-/* Decoder commands */
-#define V4L2_DEC_CMD_START       (0)
-#define V4L2_DEC_CMD_STOP        (1)
-#define V4L2_DEC_CMD_PAUSE       (2)
-#define V4L2_DEC_CMD_RESUME      (3)
-
-/* Flags for V4L2_DEC_CMD_START */
-#define V4L2_DEC_CMD_START_MUTE_AUDIO	(1 << 0)
-
-/* Flags for V4L2_DEC_CMD_PAUSE */
-#define V4L2_DEC_CMD_PAUSE_TO_BLACK	(1 << 0)
-
-/* Flags for V4L2_DEC_CMD_STOP */
-#define V4L2_DEC_CMD_STOP_TO_BLACK	(1 << 0)
-#define V4L2_DEC_CMD_STOP_IMMEDIATELY	(1 << 1)
-
-/* Play format requirements (returned by the driver): */
-
-/* The decoder has no special format requirements */
-#define V4L2_DEC_START_FMT_NONE		(0)
-/* The decoder requires full GOPs */
-#define V4L2_DEC_START_FMT_GOP		(1)
-
-/* The structure must be zeroed before use by the application
-   This ensures it can be extended safely in the future. */
-struct v4l2_decoder_cmd {
-	__u32 cmd;
-	__u32 flags;
-	union {
-		struct {
-			__u64 pts;
-		} stop;
-
-		struct {
-			/* 0 or 1000 specifies normal speed,
-			   1 specifies forward single stepping,
-			   -1 specifies backward single stepping,
-			   >1: playback at speed/1000 of the normal speed,
-			   <-1: reverse playback at (-speed/1000) of the normal speed. */
-			__s32 speed;
-			__u32 format;
-		} start;
-
-		struct {
-			__u32 data[16];
-		} raw;
-	};
-};
-#endif
-
-
-/*
- *	D A T A   S E R V I C E S   ( V B I )
- *
- *	Data services API by Michael Schimek
- */
-
-/* Raw VBI */
-struct v4l2_vbi_format {
-	__u32	sampling_rate;		/* in 1 Hz */
-	__u32	offset;
-	__u32	samples_per_line;
-	__u32	sample_format;		/* V4L2_PIX_FMT_* */
-	__s32	start[2];
-	__u32	count[2];
-	__u32	flags;			/* V4L2_VBI_* */
-	__u32	reserved[2];		/* must be zero */
-};
-
-/*  VBI flags  */
-#define V4L2_VBI_UNSYNC		(1 << 0)
-#define V4L2_VBI_INTERLACED	(1 << 1)
-
-/* Sliced VBI
- *
- *    This implements is a proposal V4L2 API to allow SLICED VBI
- * required for some hardware encoders. It should change without
- * notice in the definitive implementation.
- */
-
-struct v4l2_sliced_vbi_format {
-	__u16   service_set;
-	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
-	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
-				 (equals frame lines 313-336 for 625 line video
-				  standards, 263-286 for 525 line standards) */
-	__u16   service_lines[2][24];
-	__u32   io_size;
-	__u32   reserved[2];            /* must be zero */
-};
-
-/* Teletext World System Teletext
-   (WST), defined on ITU-R BT.653-2 */
-#define V4L2_SLICED_TELETEXT_B          (0x0001)
-/* Video Program System, defined on ETS 300 231*/
-#define V4L2_SLICED_VPS                 (0x0400)
-/* Closed Caption, defined on EIA-608 */
-#define V4L2_SLICED_CAPTION_525         (0x1000)
-/* Wide Screen System, defined on ITU-R BT1119.1 */
-#define V4L2_SLICED_WSS_625             (0x4000)
-
-#define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
-#define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
-
-struct v4l2_sliced_vbi_cap {
-	__u16   service_set;
-	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
-	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
-				 (equals frame lines 313-336 for 625 line video
-				  standards, 263-286 for 525 line standards) */
-	__u16   service_lines[2][24];
-	__u32	type;		/* enum v4l2_buf_type */
-	__u32   reserved[3];    /* must be 0 */
-};
-
-struct v4l2_sliced_vbi_data {
-	__u32   id;
-	__u32   field;          /* 0: first field, 1: second field */
-	__u32   line;           /* 1-23 */
-	__u32   reserved;       /* must be 0 */
-	__u8    data[48];
-};
-
-/*
- * Sliced VBI data inserted into MPEG Streams
- */
-
-/*
- * V4L2_MPEG_STREAM_VBI_FMT_IVTV:
- *
- * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an
- * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI
- * data
- *
- * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header
- * definitions are not included here.  See the MPEG-2 specifications for details
- * on these headers.
- */
-
-/* Line type IDs */
-#define V4L2_MPEG_VBI_IVTV_TELETEXT_B     (1)
-#define V4L2_MPEG_VBI_IVTV_CAPTION_525    (4)
-#define V4L2_MPEG_VBI_IVTV_WSS_625        (5)
-#define V4L2_MPEG_VBI_IVTV_VPS            (7)
-
-struct v4l2_mpeg_vbi_itv0_line {
-	__u8 id;	/* One of V4L2_MPEG_VBI_IVTV_* above */
-	__u8 data[42];	/* Sliced VBI data for the line */
-} __attribute__ ((packed));
-
-struct v4l2_mpeg_vbi_itv0 {
-	__le32 linemask[2]; /* Bitmasks of VBI service lines present */
-	struct v4l2_mpeg_vbi_itv0_line line[35];
-} __attribute__ ((packed));
-
-struct v4l2_mpeg_vbi_ITV0 {
-	struct v4l2_mpeg_vbi_itv0_line line[36];
-} __attribute__ ((packed));
-
-#define V4L2_MPEG_VBI_IVTV_MAGIC0	"itv0"
-#define V4L2_MPEG_VBI_IVTV_MAGIC1	"ITV0"
-
-struct v4l2_mpeg_vbi_fmt_ivtv {
-	__u8 magic[4];
-	union {
-		struct v4l2_mpeg_vbi_itv0 itv0;
-		struct v4l2_mpeg_vbi_ITV0 ITV0;
-	};
-} __attribute__ ((packed));
-
-/*
- *	A G G R E G A T E   S T R U C T U R E S
- */
-
-/**
- * struct v4l2_plane_pix_format - additional, per-plane format definition
- * @sizeimage:		maximum size in bytes required for data, for which
- *			this plane will be used
- * @bytesperline:	distance in bytes between the leftmost pixels in two
- *			adjacent lines
- */
-struct v4l2_plane_pix_format {
-	__u32		sizeimage;
-	__u16		bytesperline;
-	__u16		reserved[7];
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_pix_format_mplane - multiplanar format definition
- * @width:		image width in pixels
- * @height:		image height in pixels
- * @pixelformat:	little endian four character code (fourcc)
- * @field:		enum v4l2_field; field order (for interlaced video)
- * @colorspace:		enum v4l2_colorspace; supplemental to pixelformat
- * @plane_fmt:		per-plane information
- * @num_planes:		number of planes for this format
- */
-struct v4l2_pix_format_mplane {
-	__u32				width;
-	__u32				height;
-	__u32				pixelformat;
-	__u32				field;
-	__u32				colorspace;
-
-	struct v4l2_plane_pix_format	plane_fmt[VIDEO_MAX_PLANES];
-	__u8				num_planes;
-	__u8				reserved[11];
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_format - stream data format
- * @type:	enum v4l2_buf_type; type of the data stream
- * @pix:	definition of an image format
- * @pix_mp:	definition of a multiplanar image format
- * @win:	definition of an overlaid image
- * @vbi:	raw VBI capture or output parameters
- * @sliced:	sliced VBI capture or output parameters
- * @raw_data:	placeholder for future extensions and custom formats
- */
-struct v4l2_format {
-	__u32	 type;
-	union {
-		struct v4l2_pix_format		pix;     /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
-		struct v4l2_pix_format_mplane	pix_mp;  /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */
-		struct v4l2_window		win;     /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
-		struct v4l2_vbi_format		vbi;     /* V4L2_BUF_TYPE_VBI_CAPTURE */
-		struct v4l2_sliced_vbi_format	sliced;  /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
-		__u8	raw_data[200];                   /* user-defined */
-	} fmt;
-};
-
-/*	Stream type-dependent parameters
- */
-struct v4l2_streamparm {
-	__u32	 type;			/* enum v4l2_buf_type */
-	union {
-		struct v4l2_captureparm	capture;
-		struct v4l2_outputparm	output;
-		__u8	raw_data[200];  /* user-defined */
-	} parm;
-};
-
-/*
- *	E V E N T S
- */
-
-#define V4L2_EVENT_ALL				0
-#define V4L2_EVENT_VSYNC			1
-#define V4L2_EVENT_EOS				2
-#define V4L2_EVENT_CTRL				3
-#define V4L2_EVENT_FRAME_SYNC			4
-#define V4L2_EVENT_PRIVATE_START		0x08000000
-
-/* Payload for V4L2_EVENT_VSYNC */
-struct v4l2_event_vsync {
-	/* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
-	__u8 field;
-} __attribute__ ((packed));
-
-/* Payload for V4L2_EVENT_CTRL */
-#define V4L2_EVENT_CTRL_CH_VALUE		(1 << 0)
-#define V4L2_EVENT_CTRL_CH_FLAGS		(1 << 1)
-
-struct v4l2_event_ctrl {
-	__u32 changes;
-	__u32 type;
-	union {
-		__s32 value;
-		__s64 value64;
-	};
-	__u32 flags;
-	__s32 minimum;
-	__s32 maximum;
-	__s32 step;
-	__s32 default_value;
-};
-
-struct v4l2_event_frame_sync {
-	__u32 frame_sequence;
-};
-
-struct v4l2_event {
-	__u32				type;
-	union {
-		struct v4l2_event_vsync		vsync;
-		struct v4l2_event_ctrl		ctrl;
-		struct v4l2_event_frame_sync	frame_sync;
-		__u8				data[64];
-	} u;
-	__u32				pending;
-	__u32				sequence;
-	struct timespec			timestamp;
-	__u32				id;
-	__u32				reserved[8];
-};
-
-#define V4L2_EVENT_SUB_FL_SEND_INITIAL		(1 << 0)
-#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK	(1 << 1)
-
-struct v4l2_event_subscription {
-	__u32				type;
-	__u32				id;
-	__u32				flags;
-	__u32				reserved[5];
-};
-
-/*
- *	A D V A N C E D   D E B U G G I N G
- *
- *	NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
- *	FOR DEBUGGING, TESTING AND INTERNAL USE ONLY!
- */
-
-/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */
-
-#define V4L2_CHIP_MATCH_HOST       0  /* Match against chip ID on host (0 for the host) */
-#define V4L2_CHIP_MATCH_I2C_DRIVER 1  /* Match against I2C driver name */
-#define V4L2_CHIP_MATCH_I2C_ADDR   2  /* Match against I2C 7-bit address */
-#define V4L2_CHIP_MATCH_AC97       3  /* Match against anciliary AC97 chip */
-
-struct v4l2_dbg_match {
-	__u32 type; /* Match type */
-	union {     /* Match this chip, meaning determined by type */
-		__u32 addr;
-		char name[32];
-	};
-} __attribute__ ((packed));
-
-struct v4l2_dbg_register {
-	struct v4l2_dbg_match match;
-	__u32 size;	/* register size in bytes */
-	__u64 reg;
-	__u64 val;
-} __attribute__ ((packed));
-
-/* VIDIOC_DBG_G_CHIP_IDENT */
-struct v4l2_dbg_chip_ident {
-	struct v4l2_dbg_match match;
-	__u32 ident;       /* chip identifier as specified in <media/v4l2-chip-ident.h> */
-	__u32 revision;    /* chip revision, chip specific */
-} __attribute__ ((packed));
-
-/**
- * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
- * @index:	on return, index of the first created buffer
- * @count:	entry: number of requested buffers,
- *		return: number of created buffers
- * @memory:	enum v4l2_memory; buffer memory type
- * @format:	frame format, for which buffers are requested
- * @reserved:	future extensions
- */
-struct v4l2_create_buffers {
-	__u32			index;
-	__u32			count;
-	__u32			memory;
-	struct v4l2_format	format;
-	__u32			reserved[8];
-};
-
-/*
- *	I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
- *
- */
-#define VIDIOC_QUERYCAP		 _IOR('V',  0, struct v4l2_capability)
-#define VIDIOC_RESERVED		  _IO('V',  1)
-#define VIDIOC_ENUM_FMT         _IOWR('V',  2, struct v4l2_fmtdesc)
-#define VIDIOC_G_FMT		_IOWR('V',  4, struct v4l2_format)
-#define VIDIOC_S_FMT		_IOWR('V',  5, struct v4l2_format)
-#define VIDIOC_REQBUFS		_IOWR('V',  8, struct v4l2_requestbuffers)
-#define VIDIOC_QUERYBUF		_IOWR('V',  9, struct v4l2_buffer)
-#define VIDIOC_G_FBUF		 _IOR('V', 10, struct v4l2_framebuffer)
-#define VIDIOC_S_FBUF		 _IOW('V', 11, struct v4l2_framebuffer)
-#define VIDIOC_OVERLAY		 _IOW('V', 14, int)
-#define VIDIOC_QBUF		_IOWR('V', 15, struct v4l2_buffer)
-#define VIDIOC_DQBUF		_IOWR('V', 17, struct v4l2_buffer)
-#define VIDIOC_STREAMON		 _IOW('V', 18, int)
-#define VIDIOC_STREAMOFF	 _IOW('V', 19, int)
-#define VIDIOC_G_PARM		_IOWR('V', 21, struct v4l2_streamparm)
-#define VIDIOC_S_PARM		_IOWR('V', 22, struct v4l2_streamparm)
-#define VIDIOC_G_STD		 _IOR('V', 23, v4l2_std_id)
-#define VIDIOC_S_STD		 _IOW('V', 24, v4l2_std_id)
-#define VIDIOC_ENUMSTD		_IOWR('V', 25, struct v4l2_standard)
-#define VIDIOC_ENUMINPUT	_IOWR('V', 26, struct v4l2_input)
-#define VIDIOC_G_CTRL		_IOWR('V', 27, struct v4l2_control)
-#define VIDIOC_S_CTRL		_IOWR('V', 28, struct v4l2_control)
-#define VIDIOC_G_TUNER		_IOWR('V', 29, struct v4l2_tuner)
-#define VIDIOC_S_TUNER		 _IOW('V', 30, struct v4l2_tuner)
-#define VIDIOC_G_AUDIO		 _IOR('V', 33, struct v4l2_audio)
-#define VIDIOC_S_AUDIO		 _IOW('V', 34, struct v4l2_audio)
-#define VIDIOC_QUERYCTRL	_IOWR('V', 36, struct v4l2_queryctrl)
-#define VIDIOC_QUERYMENU	_IOWR('V', 37, struct v4l2_querymenu)
-#define VIDIOC_G_INPUT		 _IOR('V', 38, int)
-#define VIDIOC_S_INPUT		_IOWR('V', 39, int)
-#define VIDIOC_G_OUTPUT		 _IOR('V', 46, int)
-#define VIDIOC_S_OUTPUT		_IOWR('V', 47, int)
-#define VIDIOC_ENUMOUTPUT	_IOWR('V', 48, struct v4l2_output)
-#define VIDIOC_G_AUDOUT		 _IOR('V', 49, struct v4l2_audioout)
-#define VIDIOC_S_AUDOUT		 _IOW('V', 50, struct v4l2_audioout)
-#define VIDIOC_G_MODULATOR	_IOWR('V', 54, struct v4l2_modulator)
-#define VIDIOC_S_MODULATOR	 _IOW('V', 55, struct v4l2_modulator)
-#define VIDIOC_G_FREQUENCY	_IOWR('V', 56, struct v4l2_frequency)
-#define VIDIOC_S_FREQUENCY	 _IOW('V', 57, struct v4l2_frequency)
-#define VIDIOC_CROPCAP		_IOWR('V', 58, struct v4l2_cropcap)
-#define VIDIOC_G_CROP		_IOWR('V', 59, struct v4l2_crop)
-#define VIDIOC_S_CROP		 _IOW('V', 60, struct v4l2_crop)
-#define VIDIOC_G_JPEGCOMP	 _IOR('V', 61, struct v4l2_jpegcompression)
-#define VIDIOC_S_JPEGCOMP	 _IOW('V', 62, struct v4l2_jpegcompression)
-#define VIDIOC_QUERYSTD      	 _IOR('V', 63, v4l2_std_id)
-#define VIDIOC_TRY_FMT      	_IOWR('V', 64, struct v4l2_format)
-#define VIDIOC_ENUMAUDIO	_IOWR('V', 65, struct v4l2_audio)
-#define VIDIOC_ENUMAUDOUT	_IOWR('V', 66, struct v4l2_audioout)
-#define VIDIOC_G_PRIORITY	 _IOR('V', 67, __u32) /* enum v4l2_priority */
-#define VIDIOC_S_PRIORITY	 _IOW('V', 68, __u32) /* enum v4l2_priority */
-#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
-#define VIDIOC_LOG_STATUS         _IO('V', 70)
-#define VIDIOC_G_EXT_CTRLS	_IOWR('V', 71, struct v4l2_ext_controls)
-#define VIDIOC_S_EXT_CTRLS	_IOWR('V', 72, struct v4l2_ext_controls)
-#define VIDIOC_TRY_EXT_CTRLS	_IOWR('V', 73, struct v4l2_ext_controls)
-#if 1
-#define VIDIOC_ENUM_FRAMESIZES	_IOWR('V', 74, struct v4l2_frmsizeenum)
-#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
-#define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct v4l2_enc_idx)
-#define VIDIOC_ENCODER_CMD      _IOWR('V', 77, struct v4l2_encoder_cmd)
-#define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct v4l2_encoder_cmd)
-#endif
-
-#if 1
-/* Experimental, meant for debugging, testing and internal use.
-   Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
-   You must be root to use these ioctls. Never use these in applications! */
-#define	VIDIOC_DBG_S_REGISTER 	 _IOW('V', 79, struct v4l2_dbg_register)
-#define	VIDIOC_DBG_G_REGISTER 	_IOWR('V', 80, struct v4l2_dbg_register)
-
-/* Experimental, meant for debugging, testing and internal use.
-   Never use this ioctl in applications! */
-#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident)
-#endif
-
-#define VIDIOC_S_HW_FREQ_SEEK	 _IOW('V', 82, struct v4l2_hw_freq_seek)
-
-/* These four DV Preset ioctls are deprecated in favor of the DV Timings
-   ioctls. */
-#define	VIDIOC_ENUM_DV_PRESETS	_IOWR('V', 83, struct v4l2_dv_enum_preset)
-#define	VIDIOC_S_DV_PRESET	_IOWR('V', 84, struct v4l2_dv_preset)
-#define	VIDIOC_G_DV_PRESET	_IOWR('V', 85, struct v4l2_dv_preset)
-#define	VIDIOC_QUERY_DV_PRESET	_IOR('V',  86, struct v4l2_dv_preset)
-#define	VIDIOC_S_DV_TIMINGS	_IOWR('V', 87, struct v4l2_dv_timings)
-#define	VIDIOC_G_DV_TIMINGS	_IOWR('V', 88, struct v4l2_dv_timings)
-#define	VIDIOC_DQEVENT		 _IOR('V', 89, struct v4l2_event)
-#define	VIDIOC_SUBSCRIBE_EVENT	 _IOW('V', 90, struct v4l2_event_subscription)
-#define	VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
-
-/* Experimental, the below two ioctls may change over the next couple of kernel
-   versions */
-#define VIDIOC_CREATE_BUFS	_IOWR('V', 92, struct v4l2_create_buffers)
-#define VIDIOC_PREPARE_BUF	_IOWR('V', 93, struct v4l2_buffer)
-
-/* Experimental selection API */
-#define VIDIOC_G_SELECTION	_IOWR('V', 94, struct v4l2_selection)
-#define VIDIOC_S_SELECTION	_IOWR('V', 95, struct v4l2_selection)
-
-/* Experimental, these two ioctls may change over the next couple of kernel
-   versions. */
-#define VIDIOC_DECODER_CMD	_IOWR('V', 96, struct v4l2_decoder_cmd)
-#define VIDIOC_TRY_DECODER_CMD	_IOWR('V', 97, struct v4l2_decoder_cmd)
-
-/* Experimental, these three ioctls may change over the next couple of kernel
-   versions. */
-#define VIDIOC_ENUM_DV_TIMINGS  _IOWR('V', 98, struct v4l2_enum_dv_timings)
-#define VIDIOC_QUERY_DV_TIMINGS  _IOR('V', 99, struct v4l2_dv_timings)
-#define VIDIOC_DV_TIMINGS_CAP   _IOWR('V', 100, struct v4l2_dv_timings_cap)
-
-/* Experimental, this ioctl may change over the next couple of kernel
-   versions. */
-#define VIDIOC_ENUM_FREQ_BANDS	_IOWR('V', 101, struct v4l2_frequency_band)
-
-/* Reminder: when adding new ioctls please add support for them to
-   drivers/media/video/v4l2-compat-ioctl32.c as well! */
-
-#define BASE_VIDIOC_PRIVATE	192		/* 192-255 are private */
+#include <uapi/linux/videodev2.h>
 
 #endif /* __LINUX_VIDEODEV2_H */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index e2850a7..29b9104 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -1,60 +1,10 @@
 #ifndef _LINUX_VIRTIO_CONFIG_H
 #define _LINUX_VIRTIO_CONFIG_H
-/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
- * anyone can use the definitions to implement compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE. */
 
-/* Virtio devices use a standardized configuration space to define their
- * features and pass configuration information, but each implementation can
- * store and access that space differently. */
-#include <linux/types.h>
-
-/* Status byte for guest to report progress, and synchronize features. */
-/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
-#define VIRTIO_CONFIG_S_ACKNOWLEDGE	1
-/* We have found a driver for the device. */
-#define VIRTIO_CONFIG_S_DRIVER		2
-/* Driver has used its parts of the config, and is happy */
-#define VIRTIO_CONFIG_S_DRIVER_OK	4
-/* We've given up on this device. */
-#define VIRTIO_CONFIG_S_FAILED		0x80
-
-/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
- * transport being used (eg. virtio_ring), the rest are per-device feature
- * bits. */
-#define VIRTIO_TRANSPORT_F_START	28
-#define VIRTIO_TRANSPORT_F_END		32
-
-/* Do we get callbacks when the ring is completely used, even if we've
- * suppressed them? */
-#define VIRTIO_F_NOTIFY_ON_EMPTY	24
-
-#ifdef __KERNEL__
 #include <linux/err.h>
 #include <linux/bug.h>
 #include <linux/virtio.h>
+#include <uapi/linux/virtio_config.h>
 
 /**
  * virtio_config_ops - operations for configuring a virtio device
@@ -213,5 +163,4 @@
 }
 
 
-#endif /* __KERNEL__ */
 #endif /* _LINUX_VIRTIO_CONFIG_H */
diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h
index bdf4b00..d2e2785 100644
--- a/include/linux/virtio_console.h
+++ b/include/linux/virtio_console.h
@@ -1,8 +1,3 @@
-#ifndef _LINUX_VIRTIO_CONSOLE_H
-#define _LINUX_VIRTIO_CONSOLE_H
-#include <linux/types.h>
-#include <linux/virtio_ids.h>
-#include <linux/virtio_config.h>
 /*
  * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
  * anyone can use the definitions to implement compatible drivers/servers:
@@ -34,44 +29,10 @@
  * Copyright (C) Red Hat, Inc., 2009, 2010, 2011
  * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
  */
+#ifndef _LINUX_VIRTIO_CONSOLE_H
+#define _LINUX_VIRTIO_CONSOLE_H
 
-/* Feature bits */
-#define VIRTIO_CONSOLE_F_SIZE	0	/* Does host provide console size? */
-#define VIRTIO_CONSOLE_F_MULTIPORT 1	/* Does host provide multiple ports? */
+#include <uapi/linux/virtio_console.h>
 
-#define VIRTIO_CONSOLE_BAD_ID		(~(u32)0)
-
-struct virtio_console_config {
-	/* colums of the screens */
-	__u16 cols;
-	/* rows of the screens */
-	__u16 rows;
-	/* max. number of ports this device can hold */
-	__u32 max_nr_ports;
-} __attribute__((packed));
-
-/*
- * A message that's passed between the Host and the Guest for a
- * particular port.
- */
-struct virtio_console_control {
-	__u32 id;		/* Port number */
-	__u16 event;		/* The kind of control event (see below) */
-	__u16 value;		/* Extra information for the key */
-};
-
-/* Some events for control messages */
-#define VIRTIO_CONSOLE_DEVICE_READY	0
-#define VIRTIO_CONSOLE_PORT_ADD		1
-#define VIRTIO_CONSOLE_PORT_REMOVE	2
-#define VIRTIO_CONSOLE_PORT_READY	3
-#define VIRTIO_CONSOLE_CONSOLE_PORT	4
-#define VIRTIO_CONSOLE_RESIZE		5
-#define VIRTIO_CONSOLE_PORT_OPEN	6
-#define VIRTIO_CONSOLE_PORT_NAME	7
-
-#ifdef __KERNEL__
 int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
-#endif /* __KERNEL__ */
-
 #endif /* _LINUX_VIRTIO_CONSOLE_H */
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index c2d793a..63c6ea19 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -1,167 +1,9 @@
 #ifndef _LINUX_VIRTIO_RING_H
 #define _LINUX_VIRTIO_RING_H
-/* An interface for efficient virtio implementation, currently for use by KVM
- * and lguest, but hopefully others soon.  Do NOT change this since it will
- * break existing servers and clients.
- *
- * This header is BSD licensed so anyone can use the definitions to implement
- * compatible drivers/servers.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of IBM nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * Copyright Rusty Russell IBM Corporation 2007. */
-#include <linux/types.h>
 
-/* This marks a buffer as continuing via the next field. */
-#define VRING_DESC_F_NEXT	1
-/* This marks a buffer as write-only (otherwise read-only). */
-#define VRING_DESC_F_WRITE	2
-/* This means the buffer contains a list of buffer descriptors. */
-#define VRING_DESC_F_INDIRECT	4
-
-/* The Host uses this in used->flags to advise the Guest: don't kick me when
- * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
- * will still kick if it's out of buffers. */
-#define VRING_USED_F_NO_NOTIFY	1
-/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
- * when you consume a buffer.  It's unreliable, so it's simply an
- * optimization.  */
-#define VRING_AVAIL_F_NO_INTERRUPT	1
-
-/* We support indirect buffer descriptors */
-#define VIRTIO_RING_F_INDIRECT_DESC	28
-
-/* The Guest publishes the used index for which it expects an interrupt
- * at the end of the avail ring. Host should ignore the avail->flags field. */
-/* The Host publishes the avail index for which it expects a kick
- * at the end of the used ring. Guest should ignore the used->flags field. */
-#define VIRTIO_RING_F_EVENT_IDX		29
-
-/* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
-struct vring_desc {
-	/* Address (guest-physical). */
-	__u64 addr;
-	/* Length. */
-	__u32 len;
-	/* The flags as indicated above. */
-	__u16 flags;
-	/* We chain unused descriptors via this, too */
-	__u16 next;
-};
-
-struct vring_avail {
-	__u16 flags;
-	__u16 idx;
-	__u16 ring[];
-};
-
-/* u32 is used here for ids for padding reasons. */
-struct vring_used_elem {
-	/* Index of start of used descriptor chain. */
-	__u32 id;
-	/* Total length of the descriptor chain which was used (written to) */
-	__u32 len;
-};
-
-struct vring_used {
-	__u16 flags;
-	__u16 idx;
-	struct vring_used_elem ring[];
-};
-
-struct vring {
-	unsigned int num;
-
-	struct vring_desc *desc;
-
-	struct vring_avail *avail;
-
-	struct vring_used *used;
-};
-
-/* The standard layout for the ring is a continuous chunk of memory which looks
- * like this.  We assume num is a power of 2.
- *
- * struct vring
- * {
- *	// The actual descriptors (16 bytes each)
- *	struct vring_desc desc[num];
- *
- *	// A ring of available descriptor heads with free-running index.
- *	__u16 avail_flags;
- *	__u16 avail_idx;
- *	__u16 available[num];
- *	__u16 used_event_idx;
- *
- *	// Padding to the next align boundary.
- *	char pad[];
- *
- *	// A ring of used descriptor heads with free-running index.
- *	__u16 used_flags;
- *	__u16 used_idx;
- *	struct vring_used_elem used[num];
- *	__u16 avail_event_idx;
- * };
- */
-/* We publish the used event index at the end of the available ring, and vice
- * versa. They are at the end for backwards compatibility. */
-#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
-#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
-
-static inline void vring_init(struct vring *vr, unsigned int num, void *p,
-			      unsigned long align)
-{
-	vr->num = num;
-	vr->desc = p;
-	vr->avail = p + num*sizeof(struct vring_desc);
-	vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
-		+ align-1) & ~(align - 1));
-}
-
-static inline unsigned vring_size(unsigned int num, unsigned long align)
-{
-	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
-		 + align - 1) & ~(align - 1))
-		+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
-}
-
-/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
-/* Assuming a given event_idx value from the other size, if
- * we have just incremented index from old to new_idx,
- * should we trigger an event? */
-static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
-{
-	/* Note: Xen has similar logic for notification hold-off
-	 * in include/xen/interface/io/ring.h with req_event and req_prod
-	 * corresponding to event_idx + 1 and new_idx respectively.
-	 * Note also that req_event and req_prod in Xen start at 1,
-	 * event indexes in virtio start at 0. */
-	return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
-}
-
-#ifdef __KERNEL__
 #include <linux/irqreturn.h>
+#include <uapi/linux/virtio_ring.h>
+
 struct virtio_device;
 struct virtqueue;
 
@@ -179,5 +21,4 @@
 void vring_transport_features(struct virtio_device *vdev);
 
 irqreturn_t vring_interrupt(int irq, void *_vq);
-#endif /* __KERNEL__ */
 #endif /* _LINUX_VIRTIO_RING_H */
diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h
index dc8d305..d6b4440 100644
--- a/include/linux/virtio_scsi.h
+++ b/include/linux/virtio_scsi.h
@@ -72,6 +72,7 @@
 /* Feature Bits */
 #define VIRTIO_SCSI_F_INOUT                    0
 #define VIRTIO_SCSI_F_HOTPLUG                  1
+#define VIRTIO_SCSI_F_CHANGE                   2
 
 /* Response codes */
 #define VIRTIO_SCSI_S_OK                       0
@@ -108,6 +109,7 @@
 #define VIRTIO_SCSI_T_NO_EVENT                 0
 #define VIRTIO_SCSI_T_TRANSPORT_RESET          1
 #define VIRTIO_SCSI_T_ASYNC_NOTIFY             2
+#define VIRTIO_SCSI_T_PARAM_CHANGE             3
 
 /* Reasons of transport reset event */
 #define VIRTIO_SCSI_EVT_RESET_HARD             0
diff --git a/include/linux/vt.h b/include/linux/vt.h
index 30a8dd9..b186e04 100644
--- a/include/linux/vt.h
+++ b/include/linux/vt.h
@@ -1,90 +1,8 @@
 #ifndef _LINUX_VT_H
 #define _LINUX_VT_H
 
+#include <uapi/linux/vt.h>
 
-/*
- * These constants are also useful for user-level apps (e.g., VC
- * resizing).
- */
-#define MIN_NR_CONSOLES 1       /* must be at least 1 */
-#define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
-#define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
-		/* Note: the ioctl VT_GETSTATE does not work for
-		   consoles 16 and higher (since it returns a short) */
-
-/* 0x56 is 'V', to avoid collision with termios and kd */
-
-#define VT_OPENQRY	0x5600	/* find available vt */
-
-struct vt_mode {
-	char mode;		/* vt mode */
-	char waitv;		/* if set, hang on writes if not active */
-	short relsig;		/* signal to raise on release req */
-	short acqsig;		/* signal to raise on acquisition */
-	short frsig;		/* unused (set to 0) */
-};
-#define VT_GETMODE	0x5601	/* get mode of active vt */
-#define VT_SETMODE	0x5602	/* set mode of active vt */
-#define		VT_AUTO		0x00	/* auto vt switching */
-#define		VT_PROCESS	0x01	/* process controls switching */
-#define		VT_ACKACQ	0x02	/* acknowledge switch */
-
-struct vt_stat {
-	unsigned short v_active;	/* active vt */
-	unsigned short v_signal;	/* signal to send */
-	unsigned short v_state;		/* vt bitmask */
-};
-#define VT_GETSTATE	0x5603	/* get global vt state info */
-#define VT_SENDSIG	0x5604	/* signal to send to bitmask of vts */
-
-#define VT_RELDISP	0x5605	/* release display */
-
-#define VT_ACTIVATE	0x5606	/* make vt active */
-#define VT_WAITACTIVE	0x5607	/* wait for vt active */
-#define VT_DISALLOCATE	0x5608  /* free memory associated to vt */
-
-struct vt_sizes {
-	unsigned short v_rows;		/* number of rows */
-	unsigned short v_cols;		/* number of columns */
-	unsigned short v_scrollsize;	/* number of lines of scrollback */
-};
-#define VT_RESIZE	0x5609	/* set kernel's idea of screensize */
-
-struct vt_consize {
-	unsigned short v_rows;	/* number of rows */
-	unsigned short v_cols;	/* number of columns */
-	unsigned short v_vlin;	/* number of pixel rows on screen */
-	unsigned short v_clin;	/* number of pixel rows per character */
-	unsigned short v_vcol;	/* number of pixel columns on screen */
-	unsigned short v_ccol;	/* number of pixel columns per character */
-};
-#define VT_RESIZEX      0x560A  /* set kernel's idea of screensize + more */
-#define VT_LOCKSWITCH   0x560B  /* disallow vt switching */
-#define VT_UNLOCKSWITCH 0x560C  /* allow vt switching */
-#define VT_GETHIFONTMASK 0x560D  /* return hi font mask */
-
-struct vt_event {
-	unsigned int event;
-#define VT_EVENT_SWITCH		0x0001	/* Console switch */
-#define VT_EVENT_BLANK		0x0002	/* Screen blank */
-#define VT_EVENT_UNBLANK	0x0004	/* Screen unblank */
-#define VT_EVENT_RESIZE		0x0008	/* Resize display */
-#define VT_MAX_EVENT		0x000F
-	unsigned int oldev;		/* Old console */
-	unsigned int newev;		/* New console (if changing) */
-	unsigned int pad[4];		/* Padding for expansion */
-};
-
-#define VT_WAITEVENT	0x560E	/* Wait for an event */
-
-struct vt_setactivate {
-	unsigned int console;
-	struct vt_mode mode;
-};
-
-#define VT_SETACTIVATE	0x560F	/* Activate and set the mode of a console */
-
-#ifdef __KERNEL__
 
 /* Virtual Terminal events. */
 #define VT_ALLOCATE		0x0001 /* Console got allocated */
@@ -106,8 +24,4 @@
 
 #endif
 
-#endif /* __KERNEL__ */
-
-#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1)
-
 #endif /* _LINUX_VT_H */
diff --git a/include/linux/wait.h b/include/linux/wait.h
index 1dee81c..168dfe1 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -1,28 +1,12 @@
 #ifndef _LINUX_WAIT_H
 #define _LINUX_WAIT_H
 
-#define WNOHANG		0x00000001
-#define WUNTRACED	0x00000002
-#define WSTOPPED	WUNTRACED
-#define WEXITED		0x00000004
-#define WCONTINUED	0x00000008
-#define WNOWAIT		0x01000000	/* Don't reap, just poll status.  */
-
-#define __WNOTHREAD	0x20000000	/* Don't wait on children of other threads in this group */
-#define __WALL		0x40000000	/* Wait on all children, regardless of type */
-#define __WCLONE	0x80000000	/* Wait only on non-SIGCHLD children */
-
-/* First argument to waitid: */
-#define P_ALL		0
-#define P_PID		1
-#define P_PGID		2
-
-#ifdef __KERNEL__
 
 #include <linux/list.h>
 #include <linux/stddef.h>
 #include <linux/spinlock.h>
 #include <asm/current.h>
+#include <uapi/linux/wait.h>
 
 typedef struct __wait_queue wait_queue_t;
 typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key);
@@ -663,6 +647,4 @@
 	return out_of_line_wait_on_bit_lock(word, bit, action, mode);
 }
 	
-#endif /* __KERNEL__ */
-
 #endif
diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h
index 3157cc1..cec4b41 100644
--- a/include/linux/wanrouter.h
+++ b/include/linux/wanrouter.h
@@ -43,413 +43,11 @@
 * Jan 16, 1997	Gene Kozin	router_devlist made public
 * Jan 02, 1997	Gene Kozin	Initial version (based on wanpipe.h).
 *****************************************************************************/
-
 #ifndef	_ROUTER_H
 #define	_ROUTER_H
 
-#define	ROUTER_NAME	"wanrouter"	/* in case we ever change it */
-#define	ROUTER_VERSION	1		/* version number */
-#define	ROUTER_RELEASE	1		/* release (minor version) number */
-#define	ROUTER_IOCTL	'W'		/* for IOCTL calls */
-#define	ROUTER_MAGIC	0x524D4157L	/* signature: 'WANR' reversed */
+#include <uapi/linux/wanrouter.h>
 
-/* IOCTL codes for /proc/router/<device> entries (up to 255) */
-enum router_ioctls
-{
-	ROUTER_SETUP	= ROUTER_IOCTL<<8,	/* configure device */
-	ROUTER_DOWN,				/* shut down device */
-	ROUTER_STAT,				/* get device status */
-	ROUTER_IFNEW,				/* add interface */
-	ROUTER_IFDEL,				/* delete interface */
-	ROUTER_IFSTAT,				/* get interface status */
-	ROUTER_USER	= (ROUTER_IOCTL<<8)+16,	/* driver-specific calls */
-	ROUTER_USER_MAX	= (ROUTER_IOCTL<<8)+31
-};
-
-/* identifiers for displaying proc file data for dual port adapters */
-#define PROC_DATA_PORT_0 0x8000	/* the data is for port 0 */
-#define PROC_DATA_PORT_1 0x8001	/* the data is for port 1 */
-
-/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
-#define	NLPID_IP	0xCC	/* Internet Protocol Datagram */
-#define	NLPID_SNAP	0x80	/* IEEE Subnetwork Access Protocol */
-#define	NLPID_CLNP	0x81	/* ISO/IEC 8473 */
-#define	NLPID_ESIS	0x82	/* ISO/IEC 9542 */
-#define	NLPID_ISIS	0x83	/* ISO/IEC ISIS */
-#define	NLPID_Q933	0x08	/* CCITT Q.933 */
-
-/* Miscellaneous */
-#define	WAN_IFNAME_SZ	15	/* max length of the interface name */
-#define	WAN_DRVNAME_SZ	15	/* max length of the link driver name */
-#define	WAN_ADDRESS_SZ	31	/* max length of the WAN media address */
-#define USED_BY_FIELD	8	/* max length of the used by field */
-
-/* Defines for UDP PACKET TYPE */
-#define UDP_PTPIPE_TYPE 	0x01
-#define UDP_FPIPE_TYPE		0x02
-#define UDP_CPIPE_TYPE		0x03
-#define UDP_DRVSTATS_TYPE 	0x04
-#define UDP_INVALID_TYPE  	0x05
-
-/* Command return code */
-#define CMD_OK		0		/* normal firmware return code */
-#define CMD_TIMEOUT	0xFF		/* firmware command timed out */
-
-/* UDP Packet Management */
-#define UDP_PKT_FRM_STACK	0x00
-#define UDP_PKT_FRM_NETWORK	0x01
-
-/* Maximum interrupt test counter */
-#define MAX_INTR_TEST_COUNTER	100
-
-/* Critical Values for RACE conditions*/
-#define CRITICAL_IN_ISR		0xA1
-#define CRITICAL_INTR_HANDLED	0xB1
-
-/****** Data Types **********************************************************/
-
-/*----------------------------------------------------------------------------
- * X.25-specific link-level configuration.
- */
-typedef struct wan_x25_conf
-{
-	unsigned lo_pvc;	/* lowest permanent circuit number */
-	unsigned hi_pvc;	/* highest permanent circuit number */
-	unsigned lo_svc;	/* lowest switched circuit number */
-	unsigned hi_svc;	/* highest switched circuit number */
-	unsigned hdlc_window;	/* HDLC window size (1..7) */
-	unsigned pkt_window;	/* X.25 packet window size (1..7) */
-	unsigned t1;		/* HDLC timer T1, sec (1..30) */
-	unsigned t2;		/* HDLC timer T2, sec (0..29) */
-	unsigned t4;		/* HDLC supervisory frame timer = T4 * T1 */
-	unsigned n2;		/* HDLC retransmission limit (1..30) */
-	unsigned t10_t20;	/* X.25 RESTART timeout, sec (1..255) */
-	unsigned t11_t21;	/* X.25 CALL timeout, sec (1..255) */
-	unsigned t12_t22;	/* X.25 RESET timeout, sec (1..255) */
-	unsigned t13_t23;	/* X.25 CLEAR timeout, sec (1..255) */
-	unsigned t16_t26;	/* X.25 INTERRUPT timeout, sec (1..255) */
-	unsigned t28;		/* X.25 REGISTRATION timeout, sec (1..255) */
-	unsigned r10_r20;	/* RESTART retransmission limit (0..250) */
-	unsigned r12_r22;	/* RESET retransmission limit (0..250) */
-	unsigned r13_r23;	/* CLEAR retransmission limit (0..250) */
-	unsigned ccitt_compat;	/* compatibility mode: 1988/1984/1980 */
-	unsigned x25_conf_opt;   /* User defined x25 config optoins */
-	unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
-	unsigned char logging;   /* Control connection logging */  
-	unsigned char oob_on_modem; /* Whether to send modem status to the user app */
-} wan_x25_conf_t;
-
-/*----------------------------------------------------------------------------
- * Frame relay specific link-level configuration.
- */
-typedef struct wan_fr_conf
-{
-	unsigned signalling;	/* local in-channel signalling type */
-	unsigned t391;		/* link integrity verification timer */
-	unsigned t392;		/* polling verification timer */
-	unsigned n391;		/* full status polling cycle counter */
-	unsigned n392;		/* error threshold counter */
-	unsigned n393;		/* monitored events counter */
-	unsigned dlci_num;	/* number of DLCs (access node) */
-	unsigned  dlci[100];    /* List of all DLCIs */
-} wan_fr_conf_t;
-
-/*----------------------------------------------------------------------------
- * PPP-specific link-level configuration.
- */
-typedef struct wan_ppp_conf
-{
-	unsigned restart_tmr;	/* restart timer */
-	unsigned auth_rsrt_tmr;	/* authentication timer */
-	unsigned auth_wait_tmr;	/* authentication timer */
-	unsigned mdm_fail_tmr;	/* modem failure timer */
-	unsigned dtr_drop_tmr;	/* DTR drop timer */
-	unsigned connect_tmout;	/* connection timeout */
-	unsigned conf_retry;	/* max. retry */
-	unsigned term_retry;	/* max. retry */
-	unsigned fail_retry;	/* max. retry */
-	unsigned auth_retry;	/* max. retry */
-	unsigned auth_options;	/* authentication opt. */
-	unsigned ip_options;	/* IP options */
-	char	authenticator;	/* AUTHENTICATOR or not */
-	char	ip_mode;	/* Static/Host/Peer */
-} wan_ppp_conf_t;
-
-/*----------------------------------------------------------------------------
- * CHDLC-specific link-level configuration.
- */
-typedef struct wan_chdlc_conf
-{
-	unsigned char ignore_dcd;	/* Protocol options:		*/
-	unsigned char ignore_cts;	/*  Ignore these to determine	*/
-	unsigned char ignore_keepalive;	/*  link status (Yes or No)	*/
-	unsigned char hdlc_streaming;	/*  hdlc_streaming mode (Y/N) */
-	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
-	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
-	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
-	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
-	unsigned slarp_timer;		/* SLARP request timer */
-} wan_chdlc_conf_t;
-
-
-/*----------------------------------------------------------------------------
- * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
- */
-typedef struct wandev_conf
-{
-	unsigned magic;		/* magic number (for verification) */
-	unsigned config_id;	/* configuration structure identifier */
-				/****** hardware configuration ******/
-	unsigned ioport;	/* adapter I/O port base */
-	unsigned long maddr;	/* dual-port memory address */
-	unsigned msize;		/* dual-port memory size */
-	int irq;		/* interrupt request level */
-	int dma;		/* DMA request level */
-        char S514_CPU_no[1];	/* S514 PCI adapter CPU number ('A' or 'B') */
-        unsigned PCI_slot_no;	/* S514 PCI adapter slot number */
-	char auto_pci_cfg;	/* S515 PCI automatic slot detection */
-	char comm_port;		/* Communication Port (PRI=0, SEC=1) */ 
-	unsigned bps;		/* data transfer rate */
-	unsigned mtu;		/* maximum transmit unit size */
-        unsigned udp_port;      /* UDP port for management */
-	unsigned char ttl;	/* Time To Live for UDP security */
-	unsigned char ft1;	/* FT1 Configurator Option */
-        char interface;		/* RS-232/V.35, etc. */
-	char clocking;		/* external/internal */
-	char line_coding;	/* NRZ/NRZI/FM0/FM1, etc. */
-	char station;		/* DTE/DCE, primary/secondary, etc. */
-	char connection;	/* permanent/switched/on-demand */
-	char read_mode;		/* read mode: Polling or interrupt */
-	char receive_only;	/* disable tx buffers */
-	char tty;		/* Create a fake tty device */
-	unsigned tty_major;	/* Major number for wanpipe tty device */
-	unsigned tty_minor; 	/* Minor number for wanpipe tty device */
-	unsigned tty_mode;	/* TTY operation mode SYNC or ASYNC */
-	char backup;		/* Backup Mode */
-	unsigned hw_opt[4];	/* other hardware options */
-	unsigned reserved[4];
-				/****** arbitrary data ***************/
-	unsigned data_size;	/* data buffer size */
-	void* data;		/* data buffer, e.g. firmware */
-	union			/****** protocol-specific ************/
-	{
-		wan_x25_conf_t x25;	/* X.25 configuration */
-		wan_ppp_conf_t ppp;	/* PPP configuration */
-		wan_fr_conf_t fr;	/* frame relay configuration */
-		wan_chdlc_conf_t chdlc;	/* Cisco HDLC configuration */
-	} u;
-} wandev_conf_t;
-
-/* 'config_id' definitions */
-#define	WANCONFIG_X25	101	/* X.25 link */
-#define	WANCONFIG_FR	102	/* frame relay link */
-#define	WANCONFIG_PPP	103	/* synchronous PPP link */
-#define WANCONFIG_CHDLC	104	/* Cisco HDLC Link */
-#define WANCONFIG_BSC	105	/* BiSync Streaming */
-#define WANCONFIG_HDLC	106	/* HDLC Support */
-#define WANCONFIG_MPPP  107	/* Multi Port PPP over RAW CHDLC */
-
-/*
- * Configuration options defines.
- */
-/* general options */
-#define	WANOPT_OFF	0
-#define	WANOPT_ON	1
-#define	WANOPT_NO	0
-#define	WANOPT_YES	1
-
-/* intercace options */
-#define	WANOPT_RS232	0
-#define	WANOPT_V35	1
-
-/* data encoding options */
-#define	WANOPT_NRZ	0
-#define	WANOPT_NRZI	1
-#define	WANOPT_FM0	2
-#define	WANOPT_FM1	3
-
-/* link type options */
-#define	WANOPT_POINTTOPOINT	0	/* RTS always active */
-#define	WANOPT_MULTIDROP	1	/* RTS is active when transmitting */
-
-/* clocking options */
-#define	WANOPT_EXTERNAL	0
-#define	WANOPT_INTERNAL	1
-
-/* station options */
-#define	WANOPT_DTE		0
-#define	WANOPT_DCE		1
-#define	WANOPT_CPE		0
-#define	WANOPT_NODE		1
-#define	WANOPT_SECONDARY	0
-#define	WANOPT_PRIMARY		1
-
-/* connection options */
-#define	WANOPT_PERMANENT	0	/* DTR always active */
-#define	WANOPT_SWITCHED		1	/* use DTR to setup link (dial-up) */
-#define	WANOPT_ONDEMAND		2	/* activate DTR only before sending */
-
-/* frame relay in-channel signalling */
-#define	WANOPT_FR_ANSI		1	/* ANSI T1.617 Annex D */
-#define	WANOPT_FR_Q933		2	/* ITU Q.933A */
-#define	WANOPT_FR_LMI		3	/* LMI */
-
-/* PPP IP Mode Options */
-#define	WANOPT_PPP_STATIC	0
-#define	WANOPT_PPP_HOST		1
-#define	WANOPT_PPP_PEER		2
-
-/* ASY Mode Options */
-#define WANOPT_ONE 		1
-#define WANOPT_TWO		2
-#define WANOPT_ONE_AND_HALF	3
-
-#define WANOPT_NONE	0
-#define WANOPT_ODD      1
-#define WANOPT_EVEN	2
-
-/* CHDLC Protocol Options */
-/* DF Commented out for now.
-
-#define WANOPT_CHDLC_NO_DCD		IGNORE_DCD_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_CTS		IGNORE_CTS_FOR_LINK_STAT
-#define WANOPT_CHDLC_NO_KEEPALIVE	IGNORE_KPALV_FOR_LINK_STAT
-*/
-
-/* Port options */
-#define WANOPT_PRI 0
-#define WANOPT_SEC 1
-/* read mode */
-#define	WANOPT_INTR	0
-#define WANOPT_POLL	1
-
-
-#define WANOPT_TTY_SYNC  0
-#define WANOPT_TTY_ASYNC 1
-/*----------------------------------------------------------------------------
- * WAN Link Status Info (for ROUTER_STAT IOCTL).
- */
-typedef struct wandev_stat
-{
-	unsigned state;		/* link state */
-	unsigned ndev;		/* number of configured interfaces */
-
-	/* link/interface configuration */
-	unsigned connection;	/* permanent/switched/on-demand */
-	unsigned media_type;	/* Frame relay/PPP/X.25/SDLC, etc. */
-	unsigned mtu;		/* max. transmit unit for this device */
-
-	/* physical level statistics */
-	unsigned modem_status;	/* modem status */
-	unsigned rx_frames;	/* received frames count */
-	unsigned rx_overruns;	/* receiver overrun error count */
-	unsigned rx_crc_err;	/* receive CRC error count */
-	unsigned rx_aborts;	/* received aborted frames count */
-	unsigned rx_bad_length;	/* unexpetedly long/short frames count */
-	unsigned rx_dropped;	/* frames discarded at device level */
-	unsigned tx_frames;	/* transmitted frames count */
-	unsigned tx_underruns;	/* aborted transmissions (underruns) count */
-	unsigned tx_timeouts;	/* transmission timeouts */
-	unsigned tx_rejects;	/* other transmit errors */
-
-	/* media level statistics */
-	unsigned rx_bad_format;	/* frames with invalid format */
-	unsigned rx_bad_addr;	/* frames with invalid media address */
-	unsigned tx_retries;	/* frames re-transmitted */
-	unsigned reserved[16];	/* reserved for future use */
-} wandev_stat_t;
-
-/* 'state' defines */
-enum wan_states
-{
-	WAN_UNCONFIGURED,	/* link/channel is not configured */
-	WAN_DISCONNECTED,	/* link/channel is disconnected */
-	WAN_CONNECTING,		/* connection is in progress */
-	WAN_CONNECTED,		/* link/channel is operational */
-	WAN_LIMIT,		/* for verification only */
-	WAN_DUALPORT,		/* for Dual Port cards */
-	WAN_DISCONNECTING,
-	WAN_FT1_READY		/* FT1 Configurator Ready */
-};
-
-enum {
-	WAN_LOCAL_IP,
-	WAN_POINTOPOINT_IP,
-	WAN_NETMASK_IP,
-	WAN_BROADCAST_IP
-};
-
-/* 'modem_status' masks */
-#define	WAN_MODEM_CTS	0x0001	/* CTS line active */
-#define	WAN_MODEM_DCD	0x0002	/* DCD line active */
-#define	WAN_MODEM_DTR	0x0010	/* DTR line active */
-#define	WAN_MODEM_RTS	0x0020	/* RTS line active */
-
-/*----------------------------------------------------------------------------
- * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
- */
-typedef struct wanif_conf
-{
-	unsigned magic;			/* magic number */
-	unsigned config_id;		/* configuration identifier */
-	char name[WAN_IFNAME_SZ+1];	/* interface name, ASCIIZ */
-	char addr[WAN_ADDRESS_SZ+1];	/* media address, ASCIIZ */
-	char usedby[USED_BY_FIELD];	/* used by API or WANPIPE */
-	unsigned idle_timeout;		/* sec, before disconnecting */
-	unsigned hold_timeout;		/* sec, before re-connecting */
-	unsigned cir;			/* Committed Information Rate fwd,bwd*/
-	unsigned bc;			/* Committed Burst Size fwd, bwd */
-	unsigned be;			/* Excess Burst Size fwd, bwd */ 
-	unsigned char enable_IPX;	/* Enable or Disable IPX */
-	unsigned char inarp;		/* Send Inverse ARP requests Y/N */
-	unsigned inarp_interval;	/* sec, between InARP requests */
-	unsigned long network_number;	/* Network Number for IPX */
-	char mc;			/* Multicast on or off */
-	char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
-	unsigned char port;		/* board port */
-	unsigned char protocol;		/* prococol used in this channel (TCPOX25 or X25) */
-	char pap;			/* PAP enabled or disabled */
-	char chap;			/* CHAP enabled or disabled */
-	unsigned char userid[511];	/* List of User Id */
-	unsigned char passwd[511];	/* List of passwords */
-	unsigned char sysname[31];	/* Name of the system */
-	unsigned char ignore_dcd;	/* Protocol options: */
-	unsigned char ignore_cts;	/*  Ignore these to determine */
-	unsigned char ignore_keepalive;	/*  link status (Yes or No) */
-	unsigned char hdlc_streaming;	/*  Hdlc streaming mode (Y/N) */
-	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
-	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
-	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
-	unsigned slarp_timer;		/* SLARP request timer */
-	unsigned char ttl;		/* Time To Live for UDP security */
-	char interface;			/* RS-232/V.35, etc. */
-	char clocking;			/* external/internal */
-	unsigned bps;			/* data transfer rate */
-	unsigned mtu;			/* maximum transmit unit size */
-	unsigned char if_down;		/* brind down interface when disconnected */
-	unsigned char gateway;		/* Is this interface a gateway */
-	unsigned char true_if_encoding;	/* Set the dev->type to true board protocol */
-
-	unsigned char asy_data_trans;     /* async API options */
-        unsigned char rts_hs_for_receive; /* async Protocol options */
-        unsigned char xon_xoff_hs_for_receive;
-	unsigned char xon_xoff_hs_for_transmit;
-	unsigned char dcd_hs_for_transmit;
-	unsigned char cts_hs_for_transmit;
-	unsigned char async_mode;
-	unsigned tx_bits_per_char;
-	unsigned rx_bits_per_char;
-	unsigned stop_bits;  
-	unsigned char parity;
- 	unsigned break_timer;
-        unsigned inter_char_timer;
-	unsigned rx_complete_length;
-	unsigned xon_char;
-	unsigned xoff_char;
-	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
-} wanif_conf_t;
-
-#ifdef	__KERNEL__
 /****** Kernel Interface ****************************************************/
 
 #include <linux/fs.h>		/* support for device drivers */
@@ -528,5 +126,4 @@
 /* list of registered devices */
 extern struct wan_device *wanrouter_router_devlist;
 
-#endif	/* __KERNEL__ */
 #endif	/* _ROUTER_H */
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
index da70f0f..b7f45d4 100644
--- a/include/linux/watchdog.h
+++ b/include/linux/watchdog.h
@@ -5,59 +5,14 @@
  * by Ken Hollis <khollis@bitgate.com>
  *
  */
-
 #ifndef _LINUX_WATCHDOG_H
 #define _LINUX_WATCHDOG_H
 
-#include <linux/ioctl.h>
-#include <linux/types.h>
-
-#define	WATCHDOG_IOCTL_BASE	'W'
-
-struct watchdog_info {
-	__u32 options;		/* Options the card/driver supports */
-	__u32 firmware_version;	/* Firmware version of the card */
-	__u8  identity[32];	/* Identity of the board */
-};
-
-#define	WDIOC_GETSUPPORT	_IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
-#define	WDIOC_GETSTATUS		_IOR(WATCHDOG_IOCTL_BASE, 1, int)
-#define	WDIOC_GETBOOTSTATUS	_IOR(WATCHDOG_IOCTL_BASE, 2, int)
-#define	WDIOC_GETTEMP		_IOR(WATCHDOG_IOCTL_BASE, 3, int)
-#define	WDIOC_SETOPTIONS	_IOR(WATCHDOG_IOCTL_BASE, 4, int)
-#define	WDIOC_KEEPALIVE		_IOR(WATCHDOG_IOCTL_BASE, 5, int)
-#define	WDIOC_SETTIMEOUT        _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
-#define	WDIOC_GETTIMEOUT        _IOR(WATCHDOG_IOCTL_BASE, 7, int)
-#define	WDIOC_SETPRETIMEOUT	_IOWR(WATCHDOG_IOCTL_BASE, 8, int)
-#define	WDIOC_GETPRETIMEOUT	_IOR(WATCHDOG_IOCTL_BASE, 9, int)
-#define	WDIOC_GETTIMELEFT	_IOR(WATCHDOG_IOCTL_BASE, 10, int)
-
-#define	WDIOF_UNKNOWN		-1	/* Unknown flag error */
-#define	WDIOS_UNKNOWN		-1	/* Unknown status error */
-
-#define	WDIOF_OVERHEAT		0x0001	/* Reset due to CPU overheat */
-#define	WDIOF_FANFAULT		0x0002	/* Fan failed */
-#define	WDIOF_EXTERN1		0x0004	/* External relay 1 */
-#define	WDIOF_EXTERN2		0x0008	/* External relay 2 */
-#define	WDIOF_POWERUNDER	0x0010	/* Power bad/power fault */
-#define	WDIOF_CARDRESET		0x0020	/* Card previously reset the CPU */
-#define	WDIOF_POWEROVER		0x0040	/* Power over voltage */
-#define	WDIOF_SETTIMEOUT	0x0080  /* Set timeout (in seconds) */
-#define	WDIOF_MAGICCLOSE	0x0100	/* Supports magic close char */
-#define	WDIOF_PRETIMEOUT	0x0200  /* Pretimeout (in seconds), get/set */
-#define	WDIOF_ALARMONLY		0x0400	/* Watchdog triggers a management or
-					   other external alarm not a reboot */
-#define	WDIOF_KEEPALIVEPING	0x8000	/* Keep alive ping reply */
-
-#define	WDIOS_DISABLECARD	0x0001	/* Turn off the watchdog timer */
-#define	WDIOS_ENABLECARD	0x0002	/* Turn on the watchdog timer */
-#define	WDIOS_TEMPPANIC		0x0004	/* Kernel panic on temperature trip */
-
-#ifdef __KERNEL__
 
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/cdev.h>
+#include <uapi/linux/watchdog.h>
 
 struct watchdog_ops;
 struct watchdog_device;
@@ -178,6 +133,4 @@
 extern int watchdog_register_device(struct watchdog_device *);
 extern void watchdog_unregister_device(struct watchdog_device *);
 
-#endif	/* __KERNEL__ */
-
 #endif  /* ifndef _LINUX_WATCHDOG_H */
diff --git a/include/linux/wimax/Kbuild b/include/linux/wimax/Kbuild
index 3cb4f26..e69de29 100644
--- a/include/linux/wimax/Kbuild
+++ b/include/linux/wimax/Kbuild
@@ -1 +0,0 @@
-header-y += i2400m.h
diff --git a/include/linux/wireless.h b/include/linux/wireless.h
index 4395b28..4ea4c6e 100644
--- a/include/linux/wireless.h
+++ b/include/linux/wireless.h
@@ -6,690 +6,11 @@
  * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
  * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
  */
-
 #ifndef _LINUX_WIRELESS_H
 #define _LINUX_WIRELESS_H
 
-/************************** DOCUMENTATION **************************/
-/*
- * Initial APIs (1996 -> onward) :
- * -----------------------------
- * Basically, the wireless extensions are for now a set of standard ioctl
- * call + /proc/net/wireless
- *
- * The entry /proc/net/wireless give statistics and information on the
- * driver.
- * This is better than having each driver having its entry because
- * its centralised and we may remove the driver module safely.
- *
- * Ioctl are used to configure the driver and issue commands.  This is
- * better than command line options of insmod because we may want to
- * change dynamically (while the driver is running) some parameters.
- *
- * The ioctl mechanimsm are copied from standard devices ioctl.
- * We have the list of command plus a structure descibing the
- * data exchanged...
- * Note that to add these ioctl, I was obliged to modify :
- *	# net/core/dev.c (two place + add include)
- *	# net/ipv4/af_inet.c (one place + add include)
- *
- * /proc/net/wireless is a copy of /proc/net/dev.
- * We have a structure for data passed from the driver to /proc/net/wireless
- * Too add this, I've modified :
- *	# net/core/dev.c (two other places)
- *	# include/linux/netdevice.h (one place)
- *	# include/linux/proc_fs.h (one place)
- *
- * New driver API (2002 -> onward) :
- * -------------------------------
- * This file is only concerned with the user space API and common definitions.
- * The new driver API is defined and documented in :
- *	# include/net/iw_handler.h
- *
- * Note as well that /proc/net/wireless implementation has now moved in :
- *	# net/core/wireless.c
- *
- * Wireless Events (2002 -> onward) :
- * --------------------------------
- * Events are defined at the end of this file, and implemented in :
- *	# net/core/wireless.c
- *
- * Other comments :
- * --------------
- * Do not add here things that are redundant with other mechanisms
- * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
- * wireless specific.
- *
- * These wireless extensions are not magic : each driver has to provide
- * support for them...
- *
- * IMPORTANT NOTE : As everything in the kernel, this is very much a
- * work in progress. Contact me if you have ideas of improvements...
- */
-
-/***************************** INCLUDES *****************************/
-
-#include <linux/types.h>		/* for __u* and __s* typedefs */
-#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
-#include <linux/if.h>			/* for IFNAMSIZ and co... */
-
-/***************************** VERSION *****************************/
-/*
- * This constant is used to know the availability of the wireless
- * extensions and to know which version of wireless extensions it is
- * (there is some stuff that will be added in the future...)
- * I just plan to increment with each new version.
- */
-#define WIRELESS_EXT	22
-
-/*
- * Changes :
- *
- * V2 to V3
- * --------
- *	Alan Cox start some incompatibles changes. I've integrated a bit more.
- *	- Encryption renamed to Encode to avoid US regulation problems
- *	- Frequency changed from float to struct to avoid problems on old 386
- *
- * V3 to V4
- * --------
- *	- Add sensitivity
- *
- * V4 to V5
- * --------
- *	- Missing encoding definitions in range
- *	- Access points stuff
- *
- * V5 to V6
- * --------
- *	- 802.11 support (ESSID ioctls)
- *
- * V6 to V7
- * --------
- *	- define IW_ESSID_MAX_SIZE and IW_MAX_AP
- *
- * V7 to V8
- * --------
- *	- Changed my e-mail address
- *	- More 802.11 support (nickname, rate, rts, frag)
- *	- List index in frequencies
- *
- * V8 to V9
- * --------
- *	- Support for 'mode of operation' (ad-hoc, managed...)
- *	- Support for unicast and multicast power saving
- *	- Change encoding to support larger tokens (>64 bits)
- *	- Updated iw_params (disable, flags) and use it for NWID
- *	- Extracted iw_point from iwreq for clarity
- *
- * V9 to V10
- * ---------
- *	- Add PM capability to range structure
- *	- Add PM modifier : MAX/MIN/RELATIVE
- *	- Add encoding option : IW_ENCODE_NOKEY
- *	- Add TxPower ioctls (work like TxRate)
- *
- * V10 to V11
- * ----------
- *	- Add WE version in range (help backward/forward compatibility)
- *	- Add retry ioctls (work like PM)
- *
- * V11 to V12
- * ----------
- *	- Add SIOCSIWSTATS to get /proc/net/wireless programatically
- *	- Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
- *	- Add new statistics (frag, retry, beacon)
- *	- Add average quality (for user space calibration)
- *
- * V12 to V13
- * ----------
- *	- Document creation of new driver API.
- *	- Extract union iwreq_data from struct iwreq (for new driver API).
- *	- Rename SIOCSIWNAME as SIOCSIWCOMMIT
- *
- * V13 to V14
- * ----------
- *	- Wireless Events support : define struct iw_event
- *	- Define additional specific event numbers
- *	- Add "addr" and "param" fields in union iwreq_data
- *	- AP scanning stuff (SIOCSIWSCAN and friends)
- *
- * V14 to V15
- * ----------
- *	- Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
- *	- Make struct iw_freq signed (both m & e), add explicit padding
- *	- Add IWEVCUSTOM for driver specific event/scanning token
- *	- Add IW_MAX_GET_SPY for driver returning a lot of addresses
- *	- Add IW_TXPOW_RANGE for range of Tx Powers
- *	- Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
- *	- Add IW_MODE_MONITOR for passive monitor
- *
- * V15 to V16
- * ----------
- *	- Increase the number of bitrates in iw_range to 32 (for 802.11g)
- *	- Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
- *	- Reshuffle struct iw_range for increases, add filler
- *	- Increase IW_MAX_AP to 64 for driver returning a lot of addresses
- *	- Remove IW_MAX_GET_SPY because conflict with enhanced spy support
- *	- Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
- *	- Add IW_ENCODE_TEMP and iw_range->encoding_login_index
- *
- * V16 to V17
- * ----------
- *	- Add flags to frequency -> auto/fixed
- *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
- *	- Wireless Event capability in struct iw_range
- *	- Add support for relative TxPower (yick !)
- *
- * V17 to V18 (From Jouni Malinen <j@w1.fi>)
- * ----------
- *	- Add support for WPA/WPA2
- *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
- *	  SIOCGIWENCODEEXT)
- *	- Add SIOCSIWGENIE/SIOCGIWGENIE
- *	- Add SIOCSIWMLME
- *	- Add SIOCSIWPMKSA
- *	- Add struct iw_range bit field for supported encoding capabilities
- *	- Add optional scan request parameters for SIOCSIWSCAN
- *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
- *	  related parameters (extensible up to 4096 parameter values)
- *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
- *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
- *
- * V18 to V19
- * ----------
- *	- Remove (struct iw_point *)->pointer from events and streams
- *	- Remove header includes to help user space
- *	- Increase IW_ENCODING_TOKEN_MAX from 32 to 64
- *	- Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
- *	- Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
- *	- Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
- *
- * V19 to V20
- * ----------
- *	- RtNetlink requests support (SET/GET)
- *
- * V20 to V21
- * ----------
- *	- Remove (struct net_device *)->get_wireless_stats()
- *	- Change length in ESSID and NICK to strlen() instead of strlen()+1
- *	- Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
- *	- Power/Retry relative values no longer * 100000
- *	- Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
- *
- * V21 to V22
- * ----------
- *	- Prevent leaking of kernel space in stream on 64 bits.
- */
-
-/**************************** CONSTANTS ****************************/
-
-/* -------------------------- IOCTL LIST -------------------------- */
-
-/* Wireless Identification */
-#define SIOCSIWCOMMIT	0x8B00		/* Commit pending changes to driver */
-#define SIOCGIWNAME	0x8B01		/* get name == wireless protocol */
-/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
- * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
- * Don't put the name of your driver there, it's useless. */
-
-/* Basic operations */
-#define SIOCSIWNWID	0x8B02		/* set network id (pre-802.11) */
-#define SIOCGIWNWID	0x8B03		/* get network id (the cell) */
-#define SIOCSIWFREQ	0x8B04		/* set channel/frequency (Hz) */
-#define SIOCGIWFREQ	0x8B05		/* get channel/frequency (Hz) */
-#define SIOCSIWMODE	0x8B06		/* set operation mode */
-#define SIOCGIWMODE	0x8B07		/* get operation mode */
-#define SIOCSIWSENS	0x8B08		/* set sensitivity (dBm) */
-#define SIOCGIWSENS	0x8B09		/* get sensitivity (dBm) */
-
-/* Informative stuff */
-#define SIOCSIWRANGE	0x8B0A		/* Unused */
-#define SIOCGIWRANGE	0x8B0B		/* Get range of parameters */
-#define SIOCSIWPRIV	0x8B0C		/* Unused */
-#define SIOCGIWPRIV	0x8B0D		/* get private ioctl interface info */
-#define SIOCSIWSTATS	0x8B0E		/* Unused */
-#define SIOCGIWSTATS	0x8B0F		/* Get /proc/net/wireless stats */
-/* SIOCGIWSTATS is strictly used between user space and the kernel, and
- * is never passed to the driver (i.e. the driver will never see it). */
-
-/* Spy support (statistics per MAC address - used for Mobile IP support) */
-#define SIOCSIWSPY	0x8B10		/* set spy addresses */
-#define SIOCGIWSPY	0x8B11		/* get spy info (quality of link) */
-#define SIOCSIWTHRSPY	0x8B12		/* set spy threshold (spy event) */
-#define SIOCGIWTHRSPY	0x8B13		/* get spy threshold */
-
-/* Access Point manipulation */
-#define SIOCSIWAP	0x8B14		/* set access point MAC addresses */
-#define SIOCGIWAP	0x8B15		/* get access point MAC addresses */
-#define SIOCGIWAPLIST	0x8B17		/* Deprecated in favor of scanning */
-#define SIOCSIWSCAN	0x8B18		/* trigger scanning (list cells) */
-#define SIOCGIWSCAN	0x8B19		/* get scanning results */
-
-/* 802.11 specific support */
-#define SIOCSIWESSID	0x8B1A		/* set ESSID (network name) */
-#define SIOCGIWESSID	0x8B1B		/* get ESSID */
-#define SIOCSIWNICKN	0x8B1C		/* set node name/nickname */
-#define SIOCGIWNICKN	0x8B1D		/* get node name/nickname */
-/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
- * within the 'iwreq' structure, so we need to use the 'data' member to
- * point to a string in user space, like it is done for RANGE... */
-
-/* Other parameters useful in 802.11 and some other devices */
-#define SIOCSIWRATE	0x8B20		/* set default bit rate (bps) */
-#define SIOCGIWRATE	0x8B21		/* get default bit rate (bps) */
-#define SIOCSIWRTS	0x8B22		/* set RTS/CTS threshold (bytes) */
-#define SIOCGIWRTS	0x8B23		/* get RTS/CTS threshold (bytes) */
-#define SIOCSIWFRAG	0x8B24		/* set fragmentation thr (bytes) */
-#define SIOCGIWFRAG	0x8B25		/* get fragmentation thr (bytes) */
-#define SIOCSIWTXPOW	0x8B26		/* set transmit power (dBm) */
-#define SIOCGIWTXPOW	0x8B27		/* get transmit power (dBm) */
-#define SIOCSIWRETRY	0x8B28		/* set retry limits and lifetime */
-#define SIOCGIWRETRY	0x8B29		/* get retry limits and lifetime */
-
-/* Encoding stuff (scrambling, hardware security, WEP...) */
-#define SIOCSIWENCODE	0x8B2A		/* set encoding token & mode */
-#define SIOCGIWENCODE	0x8B2B		/* get encoding token & mode */
-/* Power saving stuff (power management, unicast and multicast) */
-#define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
-#define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
-
-/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
- * This ioctl uses struct iw_point and data buffer that includes IE id and len
- * fields. More than one IE may be included in the request. Setting the generic
- * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
- * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
- * are required to report the used IE as a wireless event, e.g., when
- * associating with an AP. */
-#define SIOCSIWGENIE	0x8B30		/* set generic IE */
-#define SIOCGIWGENIE	0x8B31		/* get generic IE */
-
-/* WPA : IEEE 802.11 MLME requests */
-#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
-					 * struct iw_mlme */
-/* WPA : Authentication mode parameters */
-#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
-#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
-
-/* WPA : Extended version of encoding configuration */
-#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
-#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
-
-/* WPA2 : PMKSA cache management */
-#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
-
-/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
-
-/* These 32 ioctl are wireless device private, for 16 commands.
- * Each driver is free to use them for whatever purpose it chooses,
- * however the driver *must* export the description of those ioctls
- * with SIOCGIWPRIV and *must* use arguments as defined below.
- * If you don't follow those rules, DaveM is going to hate you (reason :
- * it make mixed 32/64bit operation impossible).
- */
-#define SIOCIWFIRSTPRIV	0x8BE0
-#define SIOCIWLASTPRIV	0x8BFF
-/* Previously, we were using SIOCDEVPRIVATE, but we now have our
- * separate range because of collisions with other tools such as
- * 'mii-tool'.
- * We now have 32 commands, so a bit more space ;-).
- * Also, all 'even' commands are only usable by root and don't return the
- * content of ifr/iwr to user (but you are not obliged to use the set/get
- * convention, just use every other two command). More details in iwpriv.c.
- * And I repeat : you are not forced to use them with iwpriv, but you
- * must be compliant with it.
- */
-
-/* ------------------------- IOCTL STUFF ------------------------- */
-
-/* The first and the last (range) */
-#define SIOCIWFIRST	0x8B00
-#define SIOCIWLAST	SIOCIWLASTPRIV		/* 0x8BFF */
-#define IW_IOCTL_IDX(cmd)	((cmd) - SIOCIWFIRST)
-#define IW_HANDLER(id, func)			\
-	[IW_IOCTL_IDX(id)] = func
-
-/* Odd : get (world access), even : set (root access) */
-#define IW_IS_SET(cmd)	(!((cmd) & 0x1))
-#define IW_IS_GET(cmd)	((cmd) & 0x1)
-
-/* ----------------------- WIRELESS EVENTS ----------------------- */
-/* Those are *NOT* ioctls, do not issue request on them !!! */
-/* Most events use the same identifier as ioctl requests */
-
-#define IWEVTXDROP	0x8C00		/* Packet dropped to excessive retry */
-#define IWEVQUAL	0x8C01		/* Quality part of statistics (scan) */
-#define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
-#define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
-#define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
-#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
-					 * (scan results); This includes id and
-					 * length fields. One IWEVGENIE may
-					 * contain more than one IE. Scan
-					 * results may contain one or more
-					 * IWEVGENIE events. */
-#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
-					 * (struct iw_michaelmicfailure)
-					 */
-#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
-					 * The data includes id and length
-					 * fields and may contain more than one
-					 * IE. This event is required in
-					 * Managed mode if the driver
-					 * generates its own WPA/RSN IE. This
-					 * should be sent just before
-					 * IWEVREGISTERED event for the
-					 * association. */
-#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
-					 * Response. The data includes id and
-					 * length fields and may contain more
-					 * than one IE. This may be sent
-					 * between IWEVASSOCREQIE and
-					 * IWEVREGISTERED events for the
-					 * association. */
-#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
-					 * pre-authentication
-					 * (struct iw_pmkid_cand) */
-
-#define IWEVFIRST	0x8C00
-#define IW_EVENT_IDX(cmd)	((cmd) - IWEVFIRST)
-
-/* ------------------------- PRIVATE INFO ------------------------- */
-/*
- * The following is used with SIOCGIWPRIV. It allow a driver to define
- * the interface (name, type of data) for its private ioctl.
- * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
- */
-
-#define IW_PRIV_TYPE_MASK	0x7000	/* Type of arguments */
-#define IW_PRIV_TYPE_NONE	0x0000
-#define IW_PRIV_TYPE_BYTE	0x1000	/* Char as number */
-#define IW_PRIV_TYPE_CHAR	0x2000	/* Char as character */
-#define IW_PRIV_TYPE_INT	0x4000	/* 32 bits int */
-#define IW_PRIV_TYPE_FLOAT	0x5000	/* struct iw_freq */
-#define IW_PRIV_TYPE_ADDR	0x6000	/* struct sockaddr */
-
-#define IW_PRIV_SIZE_FIXED	0x0800	/* Variable or fixed number of args */
-
-#define IW_PRIV_SIZE_MASK	0x07FF	/* Max number of those args */
-
-/*
- * Note : if the number of args is fixed and the size < 16 octets,
- * instead of passing a pointer we will put args in the iwreq struct...
- */
-
-/* ----------------------- OTHER CONSTANTS ----------------------- */
-
-/* Maximum frequencies in the range struct */
-#define IW_MAX_FREQUENCIES	32
-/* Note : if you have something like 80 frequencies,
- * don't increase this constant and don't fill the frequency list.
- * The user will be able to set by channel anyway... */
-
-/* Maximum bit rates in the range struct */
-#define IW_MAX_BITRATES		32
-
-/* Maximum tx powers in the range struct */
-#define IW_MAX_TXPOWER		8
-/* Note : if you more than 8 TXPowers, just set the max and min or
- * a few of them in the struct iw_range. */
-
-/* Maximum of address that you may set with SPY */
-#define IW_MAX_SPY		8
-
-/* Maximum of address that you may get in the
-   list of access points in range */
-#define IW_MAX_AP		64
-
-/* Maximum size of the ESSID and NICKN strings */
-#define IW_ESSID_MAX_SIZE	32
-
-/* Modes of operation */
-#define IW_MODE_AUTO	0	/* Let the driver decides */
-#define IW_MODE_ADHOC	1	/* Single cell network */
-#define IW_MODE_INFRA	2	/* Multi cell network, roaming, ... */
-#define IW_MODE_MASTER	3	/* Synchronisation master or Access Point */
-#define IW_MODE_REPEAT	4	/* Wireless Repeater (forwarder) */
-#define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
-#define IW_MODE_MONITOR	6	/* Passive monitor (listen only) */
-#define IW_MODE_MESH	7	/* Mesh (IEEE 802.11s) network */
-
-/* Statistics flags (bitmask in updated) */
-#define IW_QUAL_QUAL_UPDATED	0x01	/* Value was updated since last read */
-#define IW_QUAL_LEVEL_UPDATED	0x02
-#define IW_QUAL_NOISE_UPDATED	0x04
-#define IW_QUAL_ALL_UPDATED	0x07
-#define IW_QUAL_DBM		0x08	/* Level + Noise are dBm */
-#define IW_QUAL_QUAL_INVALID	0x10	/* Driver doesn't provide value */
-#define IW_QUAL_LEVEL_INVALID	0x20
-#define IW_QUAL_NOISE_INVALID	0x40
-#define IW_QUAL_RCPI		0x80	/* Level + Noise are 802.11k RCPI */
-#define IW_QUAL_ALL_INVALID	0x70
-
-/* Frequency flags */
-#define IW_FREQ_AUTO		0x00	/* Let the driver decides */
-#define IW_FREQ_FIXED		0x01	/* Force a specific value */
-
-/* Maximum number of size of encoding token available
- * they are listed in the range structure */
-#define IW_MAX_ENCODING_SIZES	8
-
-/* Maximum size of the encoding token in bytes */
-#define IW_ENCODING_TOKEN_MAX	64	/* 512 bits (for now) */
-
-/* Flags for encoding (along with the token) */
-#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
-#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
-#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
-#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
-#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
-#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
-#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
-#define IW_ENCODE_NOKEY		0x0800  /* Key is write only, so not present */
-#define IW_ENCODE_TEMP		0x0400  /* Temporary key */
-
-/* Power management flags available (along with the value, if any) */
-#define IW_POWER_ON		0x0000	/* No details... */
-#define IW_POWER_TYPE		0xF000	/* Type of parameter */
-#define IW_POWER_PERIOD		0x1000	/* Value is a period/duration of  */
-#define IW_POWER_TIMEOUT	0x2000	/* Value is a timeout (to go asleep) */
-#define IW_POWER_MODE		0x0F00	/* Power Management mode */
-#define IW_POWER_UNICAST_R	0x0100	/* Receive only unicast messages */
-#define IW_POWER_MULTICAST_R	0x0200	/* Receive only multicast messages */
-#define IW_POWER_ALL_R		0x0300	/* Receive all messages though PM */
-#define IW_POWER_FORCE_S	0x0400	/* Force PM procedure for sending unicast */
-#define IW_POWER_REPEATER	0x0800	/* Repeat broadcast messages in PM period */
-#define IW_POWER_MODIFIER	0x000F	/* Modify a parameter */
-#define IW_POWER_MIN		0x0001	/* Value is a minimum  */
-#define IW_POWER_MAX		0x0002	/* Value is a maximum */
-#define IW_POWER_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
-
-/* Transmit Power flags available */
-#define IW_TXPOW_TYPE		0x00FF	/* Type of value */
-#define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
-#define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
-#define IW_TXPOW_RELATIVE	0x0002	/* Value is in arbitrary units */
-#define IW_TXPOW_RANGE		0x1000	/* Range of value between min/max */
-
-/* Retry limits and lifetime flags available */
-#define IW_RETRY_ON		0x0000	/* No details... */
-#define IW_RETRY_TYPE		0xF000	/* Type of parameter */
-#define IW_RETRY_LIMIT		0x1000	/* Maximum number of retries*/
-#define IW_RETRY_LIFETIME	0x2000	/* Maximum duration of retries in us */
-#define IW_RETRY_MODIFIER	0x00FF	/* Modify a parameter */
-#define IW_RETRY_MIN		0x0001	/* Value is a minimum  */
-#define IW_RETRY_MAX		0x0002	/* Value is a maximum */
-#define IW_RETRY_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
-#define IW_RETRY_SHORT		0x0010	/* Value is for short packets  */
-#define IW_RETRY_LONG		0x0020	/* Value is for long packets */
-
-/* Scanning request flags */
-#define IW_SCAN_DEFAULT		0x0000	/* Default scan of the driver */
-#define IW_SCAN_ALL_ESSID	0x0001	/* Scan all ESSIDs */
-#define IW_SCAN_THIS_ESSID	0x0002	/* Scan only this ESSID */
-#define IW_SCAN_ALL_FREQ	0x0004	/* Scan all Frequencies */
-#define IW_SCAN_THIS_FREQ	0x0008	/* Scan only this Frequency */
-#define IW_SCAN_ALL_MODE	0x0010	/* Scan all Modes */
-#define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
-#define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
-#define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
-/* struct iw_scan_req scan_type */
-#define IW_SCAN_TYPE_ACTIVE 0
-#define IW_SCAN_TYPE_PASSIVE 1
-/* Maximum size of returned data */
-#define IW_SCAN_MAX_DATA	4096	/* In bytes */
-
-/* Scan capability flags - in (struct iw_range *)->scan_capa */
-#define IW_SCAN_CAPA_NONE		0x00
-#define IW_SCAN_CAPA_ESSID		0x01
-#define IW_SCAN_CAPA_BSSID		0x02
-#define IW_SCAN_CAPA_CHANNEL	0x04
-#define IW_SCAN_CAPA_MODE		0x08
-#define IW_SCAN_CAPA_RATE		0x10
-#define IW_SCAN_CAPA_TYPE		0x20
-#define IW_SCAN_CAPA_TIME		0x40
-
-/* Max number of char in custom event - use multiple of them if needed */
-#define IW_CUSTOM_MAX		256	/* In bytes */
-
-/* Generic information element */
-#define IW_GENERIC_IE_MAX	1024
-
-/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
-#define IW_MLME_DEAUTH		0
-#define IW_MLME_DISASSOC	1
-#define IW_MLME_AUTH		2
-#define IW_MLME_ASSOC		3
-
-/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
-#define IW_AUTH_INDEX		0x0FFF
-#define IW_AUTH_FLAGS		0xF000
-/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
- * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
- * parameter that is being set/get to; value will be read/written to
- * struct iw_param value field) */
-#define IW_AUTH_WPA_VERSION		0
-#define IW_AUTH_CIPHER_PAIRWISE		1
-#define IW_AUTH_CIPHER_GROUP		2
-#define IW_AUTH_KEY_MGMT		3
-#define IW_AUTH_TKIP_COUNTERMEASURES	4
-#define IW_AUTH_DROP_UNENCRYPTED	5
-#define IW_AUTH_80211_AUTH_ALG		6
-#define IW_AUTH_WPA_ENABLED		7
-#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
-#define IW_AUTH_ROAMING_CONTROL		9
-#define IW_AUTH_PRIVACY_INVOKED		10
-#define IW_AUTH_CIPHER_GROUP_MGMT	11
-#define IW_AUTH_MFP			12
-
-/* IW_AUTH_WPA_VERSION values (bit field) */
-#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
-#define IW_AUTH_WPA_VERSION_WPA		0x00000002
-#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
-
-/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
- * values (bit field) */
-#define IW_AUTH_CIPHER_NONE	0x00000001
-#define IW_AUTH_CIPHER_WEP40	0x00000002
-#define IW_AUTH_CIPHER_TKIP	0x00000004
-#define IW_AUTH_CIPHER_CCMP	0x00000008
-#define IW_AUTH_CIPHER_WEP104	0x00000010
-#define IW_AUTH_CIPHER_AES_CMAC	0x00000020
-
-/* IW_AUTH_KEY_MGMT values (bit field) */
-#define IW_AUTH_KEY_MGMT_802_1X	1
-#define IW_AUTH_KEY_MGMT_PSK	2
-
-/* IW_AUTH_80211_AUTH_ALG values (bit field) */
-#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
-#define IW_AUTH_ALG_SHARED_KEY	0x00000002
-#define IW_AUTH_ALG_LEAP	0x00000004
-
-/* IW_AUTH_ROAMING_CONTROL values */
-#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
-#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
-					 * control */
-
-/* IW_AUTH_MFP (management frame protection) values */
-#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
-#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
-#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
-
-/* SIOCSIWENCODEEXT definitions */
-#define IW_ENCODE_SEQ_MAX_SIZE	8
-/* struct iw_encode_ext ->alg */
-#define IW_ENCODE_ALG_NONE	0
-#define IW_ENCODE_ALG_WEP	1
-#define IW_ENCODE_ALG_TKIP	2
-#define IW_ENCODE_ALG_CCMP	3
-#define IW_ENCODE_ALG_PMK	4
-#define IW_ENCODE_ALG_AES_CMAC	5
-/* struct iw_encode_ext ->ext_flags */
-#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
-#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
-#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
-#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
-
-/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
-#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
-#define IW_MICFAILURE_GROUP	0x00000004
-#define IW_MICFAILURE_PAIRWISE	0x00000008
-#define IW_MICFAILURE_STAKEY	0x00000010
-#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
-					    */
-
-/* Bit field values for enc_capa in struct iw_range */
-#define IW_ENC_CAPA_WPA		0x00000001
-#define IW_ENC_CAPA_WPA2	0x00000002
-#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
-#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
-#define IW_ENC_CAPA_4WAY_HANDSHAKE	0x00000010
-
-/* Event capability macros - in (struct iw_range *)->event_capa
- * Because we have more than 32 possible events, we use an array of
- * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
-#define IW_EVENT_CAPA_BASE(cmd)		((cmd >= SIOCIWFIRSTPRIV) ? \
-					 (cmd - SIOCIWFIRSTPRIV + 0x60) : \
-					 (cmd - SIOCIWFIRST))
-#define IW_EVENT_CAPA_INDEX(cmd)	(IW_EVENT_CAPA_BASE(cmd) >> 5)
-#define IW_EVENT_CAPA_MASK(cmd)		(1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
-/* Event capability constants - event autogenerated by the kernel
- * This list is valid for most 802.11 devices, customise as needed... */
-#define IW_EVENT_CAPA_K_0	(IW_EVENT_CAPA_MASK(0x8B04) | \
-				 IW_EVENT_CAPA_MASK(0x8B06) | \
-				 IW_EVENT_CAPA_MASK(0x8B1A))
-#define IW_EVENT_CAPA_K_1	(IW_EVENT_CAPA_MASK(0x8B2A))
-/* "Easy" macro to set events in iw_range (less efficient) */
-#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
-#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
-
-
-/****************************** TYPES ******************************/
-
-/* --------------------------- SUBTYPES --------------------------- */
-/*
- *	Generic format for most parameters that fit in an int
- */
-struct	iw_param
-{
-  __s32		value;		/* The value of the parameter itself */
-  __u8		fixed;		/* Hardware should not use auto select */
-  __u8		disabled;	/* Disable the feature */
-  __u16		flags;		/* Various specifc flags (if any) */
-};
-
-/*
- *	For all data larger than 16 octets, we need to use a
- *	pointer to memory allocated in user space.
- */
-struct	iw_point
-{
-  void __user	*pointer;	/* Pointer to the data  (in user space) */
-  __u16		length;		/* number of fields or size in bytes */
-  __u16		flags;		/* Optional params */
-};
+#include <uapi/linux/wireless.h>
 
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 
 #include <linux/compat.h>
@@ -700,432 +21,6 @@
 	__u16 flags;
 };
 #endif
-#endif
-
-/*
- *	A frequency
- *	For numbers lower than 10^9, we encode the number in 'm' and
- *	set 'e' to 0
- *	For number greater than 10^9, we divide it by the lowest power
- *	of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
- *	The power of 10 is in 'e', the result of the division is in 'm'.
- */
-struct	iw_freq
-{
-	__s32		m;		/* Mantissa */
-	__s16		e;		/* Exponent */
-	__u8		i;		/* List index (when in range struct) */
-	__u8		flags;		/* Flags (fixed/auto) */
-};
-
-/*
- *	Quality of the link
- */
-struct	iw_quality
-{
-	__u8		qual;		/* link quality (%retries, SNR,
-					   %missed beacons or better...) */
-	__u8		level;		/* signal level (dBm) */
-	__u8		noise;		/* noise level (dBm) */
-	__u8		updated;	/* Flags to know if updated */
-};
-
-/*
- *	Packet discarded in the wireless adapter due to
- *	"wireless" specific problems...
- *	Note : the list of counter and statistics in net_device_stats
- *	is already pretty exhaustive, and you should use that first.
- *	This is only additional stats...
- */
-struct	iw_discarded
-{
-	__u32		nwid;		/* Rx : Wrong nwid/essid */
-	__u32		code;		/* Rx : Unable to code/decode (WEP) */
-	__u32		fragment;	/* Rx : Can't perform MAC reassembly */
-	__u32		retries;	/* Tx : Max MAC retries num reached */
-	__u32		misc;		/* Others cases */
-};
-
-/*
- *	Packet/Time period missed in the wireless adapter due to
- *	"wireless" specific problems...
- */
-struct	iw_missed
-{
-	__u32		beacon;		/* Missed beacons/superframe */
-};
-
-/*
- *	Quality range (for spy threshold)
- */
-struct	iw_thrspy
-{
-	struct sockaddr		addr;		/* Source address (hw/mac) */
-	struct iw_quality	qual;		/* Quality of the link */
-	struct iw_quality	low;		/* Low threshold */
-	struct iw_quality	high;		/* High threshold */
-};
-
-/*
- *	Optional data for scan request
- *
- *	Note: these optional parameters are controlling parameters for the
- *	scanning behavior, these do not apply to getting scan results
- *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
- *	provide a merged results with all BSSes even if the previous scan
- *	request limited scanning to a subset, e.g., by specifying an SSID.
- *	Especially, scan results are required to include an entry for the
- *	current BSS if the driver is in Managed mode and associated with an AP.
- */
-struct	iw_scan_req
-{
-	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
-	__u8		essid_len;
-	__u8		num_channels; /* num entries in channel_list;
-				       * 0 = scan all allowed channels */
-	__u8		flags; /* reserved as padding; use zero, this may
-				* be used in the future for adding flags
-				* to request different scan behavior */
-	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
-				* individual address of a specific BSS */
-
-	/*
-	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
-	 * the current ESSID. This allows scan requests for specific ESSID
-	 * without having to change the current ESSID and potentially breaking
-	 * the current association.
-	 */
-	__u8		essid[IW_ESSID_MAX_SIZE];
-
-	/*
-	 * Optional parameters for changing the default scanning behavior.
-	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
-	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
-	 * reasonable default values. min_channel_time defines the time that
-	 * will be used to wait for the first reply on each channel. If no
-	 * replies are received, next channel will be scanned after this. If
-	 * replies are received, total time waited on the channel is defined by
-	 * max_channel_time.
-	 */
-	__u32		min_channel_time; /* in TU */
-	__u32		max_channel_time; /* in TU */
-
-	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
-};
-
-/* ------------------------- WPA SUPPORT ------------------------- */
-
-/*
- *	Extended data structure for get/set encoding (this is used with
- *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
- *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
- *	only the data contents changes (key data -> this structure, including
- *	key data).
- *
- *	If the new key is the first group key, it will be set as the default
- *	TX key. Otherwise, default TX key index is only changed if
- *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
- *
- *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
- *	special "change TX key index" operation which is indicated by setting
- *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
- *
- *	tx_seq/rx_seq are only used when respective
- *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
- *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
- *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
- *	used only by an Authenticator (AP or an IBSS station) to get the
- *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
- *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
- *	debugging/testing.
- */
-struct	iw_encode_ext
-{
-	__u32		ext_flags; /* IW_ENCODE_EXT_* */
-	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
-			       * (group) keys or unicast address for
-			       * individual keys */
-	__u16		alg; /* IW_ENCODE_ALG_* */
-	__u16		key_len;
-	__u8		key[0];
-};
-
-/* SIOCSIWMLME data */
-struct	iw_mlme
-{
-	__u16		cmd; /* IW_MLME_* */
-	__u16		reason_code;
-	struct sockaddr	addr;
-};
-
-/* SIOCSIWPMKSA data */
-#define IW_PMKSA_ADD		1
-#define IW_PMKSA_REMOVE		2
-#define IW_PMKSA_FLUSH		3
-
-#define IW_PMKID_LEN	16
-
-struct	iw_pmksa
-{
-	__u32		cmd; /* IW_PMKSA_* */
-	struct sockaddr	bssid;
-	__u8		pmkid[IW_PMKID_LEN];
-};
-
-/* IWEVMICHAELMICFAILURE data */
-struct	iw_michaelmicfailure
-{
-	__u32		flags;
-	struct sockaddr	src_addr;
-	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
-};
-
-/* IWEVPMKIDCAND data */
-#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
-struct	iw_pmkid_cand
-{
-	__u32		flags; /* IW_PMKID_CAND_* */
-	__u32		index; /* the smaller the index, the higher the
-				* priority */
-	struct sockaddr	bssid;
-};
-
-/* ------------------------ WIRELESS STATS ------------------------ */
-/*
- * Wireless statistics (used for /proc/net/wireless)
- */
-struct	iw_statistics
-{
-	__u16		status;		/* Status
-					 * - device dependent for now */
-
-	struct iw_quality	qual;		/* Quality of the link
-						 * (instant/mean/max) */
-	struct iw_discarded	discard;	/* Packet discarded counts */
-	struct iw_missed	miss;		/* Packet missed counts */
-};
-
-/* ------------------------ IOCTL REQUEST ------------------------ */
-/*
- * This structure defines the payload of an ioctl, and is used 
- * below.
- *
- * Note that this structure should fit on the memory footprint
- * of iwreq (which is the same as ifreq), which mean a max size of
- * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
- * You should check this when increasing the structures defined
- * above in this file...
- */
-union	iwreq_data
-{
-	/* Config - generic */
-	char		name[IFNAMSIZ];
-	/* Name : used to verify the presence of  wireless extensions.
-	 * Name of the protocol/provider... */
-
-	struct iw_point	essid;		/* Extended network name */
-	struct iw_param	nwid;		/* network id (or domain - the cell) */
-	struct iw_freq	freq;		/* frequency or channel :
-					 * 0-1000 = channel
-					 * > 1000 = frequency in Hz */
-
-	struct iw_param	sens;		/* signal level threshold */
-	struct iw_param	bitrate;	/* default bit rate */
-	struct iw_param	txpower;	/* default transmit power */
-	struct iw_param	rts;		/* RTS threshold threshold */
-	struct iw_param	frag;		/* Fragmentation threshold */
-	__u32		mode;		/* Operation mode */
-	struct iw_param	retry;		/* Retry limits & lifetime */
-
-	struct iw_point	encoding;	/* Encoding stuff : tokens */
-	struct iw_param	power;		/* PM duration/timeout */
-	struct iw_quality qual;		/* Quality part of statistics */
-
-	struct sockaddr	ap_addr;	/* Access point address */
-	struct sockaddr	addr;		/* Destination address (hw/mac) */
-
-	struct iw_param	param;		/* Other small parameters */
-	struct iw_point	data;		/* Other large parameters */
-};
-
-/*
- * The structure to exchange data for ioctl.
- * This structure is the same as 'struct ifreq', but (re)defined for
- * convenience...
- * Do I need to remind you about structure size (32 octets) ?
- */
-struct	iwreq 
-{
-	union
-	{
-		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
-	} ifr_ifrn;
-
-	/* Data part (defined just above) */
-	union	iwreq_data	u;
-};
-
-/* -------------------------- IOCTL DATA -------------------------- */
-/*
- *	For those ioctl which want to exchange mode data that what could
- *	fit in the above structure...
- */
-
-/*
- *	Range of parameters
- */
-
-struct	iw_range
-{
-	/* Informative stuff (to choose between different interface) */
-	__u32		throughput;	/* To give an idea... */
-	/* In theory this value should be the maximum benchmarked
-	 * TCP/IP throughput, because with most of these devices the
-	 * bit rate is meaningless (overhead an co) to estimate how
-	 * fast the connection will go and pick the fastest one.
-	 * I suggest people to play with Netperf or any benchmark...
-	 */
-
-	/* NWID (or domain id) */
-	__u32		min_nwid;	/* Minimal NWID we are able to set */
-	__u32		max_nwid;	/* Maximal NWID we are able to set */
-
-	/* Old Frequency (backward compat - moved lower ) */
-	__u16		old_num_channels;
-	__u8		old_num_frequency;
-
-	/* Scan capabilities */
-	__u8		scan_capa; 	/* IW_SCAN_CAPA_* bit field */
-
-	/* Wireless event capability bitmasks */
-	__u32		event_capa[6];
-
-	/* signal level threshold range */
-	__s32		sensitivity;
-
-	/* Quality of link & SNR stuff */
-	/* Quality range (link, level, noise)
-	 * If the quality is absolute, it will be in the range [0 ; max_qual],
-	 * if the quality is dBm, it will be in the range [max_qual ; 0].
-	 * Don't forget that we use 8 bit arithmetics... */
-	struct iw_quality	max_qual;	/* Quality of the link */
-	/* This should contain the average/typical values of the quality
-	 * indicator. This should be the threshold between a "good" and
-	 * a "bad" link (example : monitor going from green to orange).
-	 * Currently, user space apps like quality monitors don't have any
-	 * way to calibrate the measurement. With this, they can split
-	 * the range between 0 and max_qual in different quality level
-	 * (using a geometric subdivision centered on the average).
-	 * I expect that people doing the user space apps will feedback
-	 * us on which value we need to put in each driver... */
-	struct iw_quality	avg_qual;	/* Quality of the link */
-
-	/* Rates */
-	__u8		num_bitrates;	/* Number of entries in the list */
-	__s32		bitrate[IW_MAX_BITRATES];	/* list, in bps */
-
-	/* RTS threshold */
-	__s32		min_rts;	/* Minimal RTS threshold */
-	__s32		max_rts;	/* Maximal RTS threshold */
-
-	/* Frag threshold */
-	__s32		min_frag;	/* Minimal frag threshold */
-	__s32		max_frag;	/* Maximal frag threshold */
-
-	/* Power Management duration & timeout */
-	__s32		min_pmp;	/* Minimal PM period */
-	__s32		max_pmp;	/* Maximal PM period */
-	__s32		min_pmt;	/* Minimal PM timeout */
-	__s32		max_pmt;	/* Maximal PM timeout */
-	__u16		pmp_flags;	/* How to decode max/min PM period */
-	__u16		pmt_flags;	/* How to decode max/min PM timeout */
-	__u16		pm_capa;	/* What PM options are supported */
-
-	/* Encoder stuff */
-	__u16	encoding_size[IW_MAX_ENCODING_SIZES];	/* Different token sizes */
-	__u8	num_encoding_sizes;	/* Number of entry in the list */
-	__u8	max_encoding_tokens;	/* Max number of tokens */
-	/* For drivers that need a "login/passwd" form */
-	__u8	encoding_login_index;	/* token index for login token */
-
-	/* Transmit power */
-	__u16		txpower_capa;	/* What options are supported */
-	__u8		num_txpower;	/* Number of entries in the list */
-	__s32		txpower[IW_MAX_TXPOWER];	/* list, in bps */
-
-	/* Wireless Extension version info */
-	__u8		we_version_compiled;	/* Must be WIRELESS_EXT */
-	__u8		we_version_source;	/* Last update of source */
-
-	/* Retry limits and lifetime */
-	__u16		retry_capa;	/* What retry options are supported */
-	__u16		retry_flags;	/* How to decode max/min retry limit */
-	__u16		r_time_flags;	/* How to decode max/min retry life */
-	__s32		min_retry;	/* Minimal number of retries */
-	__s32		max_retry;	/* Maximal number of retries */
-	__s32		min_r_time;	/* Minimal retry lifetime */
-	__s32		max_r_time;	/* Maximal retry lifetime */
-
-	/* Frequency */
-	__u16		num_channels;	/* Number of channels [0; num - 1] */
-	__u8		num_frequency;	/* Number of entry in the list */
-	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
-	/* Note : this frequency list doesn't need to fit channel numbers,
-	 * because each entry contain its channel index */
-
-	__u32		enc_capa;	/* IW_ENC_CAPA_* bit field */
-};
-
-/*
- * Private ioctl interface information
- */
- 
-struct	iw_priv_args
-{
-	__u32		cmd;		/* Number of the ioctl to issue */
-	__u16		set_args;	/* Type and number of args */
-	__u16		get_args;	/* Type and number of args */
-	char		name[IFNAMSIZ];	/* Name of the extension */
-};
-
-/* ----------------------- WIRELESS EVENTS ----------------------- */
-/*
- * Wireless events are carried through the rtnetlink socket to user
- * space. They are encapsulated in the IFLA_WIRELESS field of
- * a RTM_NEWLINK message.
- */
-
-/*
- * A Wireless Event. Contains basically the same data as the ioctl...
- */
-struct iw_event
-{
-	__u16		len;			/* Real length of this stuff */
-	__u16		cmd;			/* Wireless IOCTL */
-	union iwreq_data	u;		/* IOCTL fixed payload */
-};
-
-/* Size of the Event prefix (including padding and alignement junk) */
-#define IW_EV_LCP_LEN	(sizeof(struct iw_event) - sizeof(union iwreq_data))
-/* Size of the various events */
-#define IW_EV_CHAR_LEN	(IW_EV_LCP_LEN + IFNAMSIZ)
-#define IW_EV_UINT_LEN	(IW_EV_LCP_LEN + sizeof(__u32))
-#define IW_EV_FREQ_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_freq))
-#define IW_EV_PARAM_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_param))
-#define IW_EV_ADDR_LEN	(IW_EV_LCP_LEN + sizeof(struct sockaddr))
-#define IW_EV_QUAL_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_quality))
-
-/* iw_point events are special. First, the payload (extra data) come at
- * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
- * we omit the pointer, so start at an offset. */
-#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
-			  (char *) NULL)
-#define IW_EV_POINT_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_point) - \
-			 IW_EV_POINT_OFF)
-
-#ifdef __KERNEL__
 #ifdef CONFIG_COMPAT
 struct __compat_iw_event {
 	__u16		len;			/* Real length of this stuff */
@@ -1146,17 +41,4 @@
 	(IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \
 	 IW_EV_COMPAT_POINT_OFF)
 #endif
-#endif
-
-/* Size of the Event prefix when packed in stream */
-#define IW_EV_LCP_PK_LEN	(4)
-/* Size of the various events when packed in stream */
-#define IW_EV_CHAR_PK_LEN	(IW_EV_LCP_PK_LEN + IFNAMSIZ)
-#define IW_EV_UINT_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(__u32))
-#define IW_EV_FREQ_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
-#define IW_EV_PARAM_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
-#define IW_EV_ADDR_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
-#define IW_EV_QUAL_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
-#define IW_EV_POINT_PK_LEN	(IW_EV_LCP_PK_LEN + 4)
-
 #endif	/* _LINUX_WIRELESS_H */
diff --git a/include/linux/xattr.h b/include/linux/xattr.h
index cc13e11..fdbafc6 100644
--- a/include/linux/xattr.h
+++ b/include/linux/xattr.h
@@ -10,61 +10,11 @@
 #ifndef _LINUX_XATTR_H
 #define _LINUX_XATTR_H
 
-#define XATTR_CREATE	0x1	/* set value, fail if attr already exists */
-#define XATTR_REPLACE	0x2	/* set value, fail if attr does not exist */
-
-/* Namespaces */
-#define XATTR_OS2_PREFIX "os2."
-#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1)
-
-#define XATTR_SECURITY_PREFIX	"security."
-#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1)
-
-#define XATTR_SYSTEM_PREFIX "system."
-#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1)
-
-#define XATTR_TRUSTED_PREFIX "trusted."
-#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1)
-
-#define XATTR_USER_PREFIX "user."
-#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
-
-/* Security namespace */
-#define XATTR_EVM_SUFFIX "evm"
-#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX
-
-#define XATTR_IMA_SUFFIX "ima"
-#define XATTR_NAME_IMA XATTR_SECURITY_PREFIX XATTR_IMA_SUFFIX
-
-#define XATTR_SELINUX_SUFFIX "selinux"
-#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
-
-#define XATTR_SMACK_SUFFIX "SMACK64"
-#define XATTR_SMACK_IPIN "SMACK64IPIN"
-#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
-#define XATTR_SMACK_EXEC "SMACK64EXEC"
-#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE"
-#define XATTR_SMACK_MMAP "SMACK64MMAP"
-#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
-#define XATTR_NAME_SMACKIPIN	XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
-#define XATTR_NAME_SMACKIPOUT	XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
-#define XATTR_NAME_SMACKEXEC	XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC
-#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE
-#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP
-
-#define XATTR_CAPS_SUFFIX "capability"
-#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
-
-#define XATTR_POSIX_ACL_ACCESS  "posix_acl_access"
-#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS
-#define XATTR_POSIX_ACL_DEFAULT  "posix_acl_default"
-#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT
-
-#ifdef  __KERNEL__
 
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/spinlock.h>
+#include <uapi/linux/xattr.h>
 
 struct inode;
 struct dentry;
@@ -147,6 +97,4 @@
 void simple_xattr_list_add(struct simple_xattrs *xattrs,
 			   struct simple_xattr *new_xattr);
 
-#endif  /*  __KERNEL__  */
-
 #endif	/* _LINUX_XATTR_H */
diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h
index 0d7d67e..9c87029 100644
--- a/include/scsi/fc/fc_fcp.h
+++ b/include/scsi/fc/fc_fcp.h
@@ -127,6 +127,9 @@
  *
  * All response frames will always contain the fcp_resp template.  Some
  * will also include the fcp_resp_len template.
+ *
+ * From Table 23, the FCP_RSP_INFO can either be 4 bytes or 8 bytes, both
+ * are valid length.
  */
 struct fcp_resp {
 	__u8		_fr_resvd[8];	/* reserved */
@@ -156,6 +159,9 @@
     __u8      _fr_resvd2[4];      /* reserved */
 };
 
+#define FCP_RESP_RSP_INFO_LEN4    4 /* without reserved field */
+#define FCP_RESP_RSP_INFO_LEN8    8 /* with reserved field */
+
 struct fcp_resp_with_ext {
 	struct fcp_resp resp;
 	struct fcp_resp_ext ext;
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index 22b07cc..8742d85 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -327,7 +327,6 @@
  * @lport:		       The associated local port
  * @fcoe_pending_queue:	       The pending Rx queue of skbs
  * @fcoe_pending_queue_active: Indicates if the pending queue is active
- * @priority:		       Packet priority (DCB)
  * @max_queue_depth:	       Max queue depth of pending queue
  * @min_queue_depth:	       Min queue depth of pending queue
  * @timer:		       The queue timer
@@ -343,7 +342,6 @@
 	struct fc_lport	      *lport;
 	struct sk_buff_head   fcoe_pending_queue;
 	u8		      fcoe_pending_queue_active;
-	u8		      priority;
 	u32		      max_queue_depth;
 	u32		      min_queue_depth;
 	struct timer_list     timer;
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index ac06cc5..de5f5d8 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -132,18 +132,10 @@
 	unsigned char tag;	/* SCSI-II queued command tag */
 };
 
+/* make sure not to use it with REQ_TYPE_BLOCK_PC commands */
 static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
 {
-	struct scsi_driver **sdp;
-
-	if (!cmd->request->rq_disk)
-		return NULL;
-
-	sdp = (struct scsi_driver **)cmd->request->rq_disk->private_data;
-	if (!sdp)
-		return NULL;
-
-	return *sdp;
+	return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
 }
 
 extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index b0fd4d0..e194387 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -22,3 +22,396 @@
 header-y += wimax/
 
 genhdr-y += version.h
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h \
+		  $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h),)
+header-y += a.out.h
+endif
+
+header-y += acct.h
+header-y += adb.h
+header-y += adfs_fs.h
+header-y += affs_hardblocks.h
+header-y += agpgart.h
+header-y += aio_abi.h
+header-y += apm_bios.h
+header-y += arcfb.h
+header-y += atalk.h
+header-y += atm.h
+header-y += atm_eni.h
+header-y += atm_he.h
+header-y += atm_idt77105.h
+header-y += atm_nicstar.h
+header-y += atm_tcp.h
+header-y += atm_zatm.h
+header-y += atmapi.h
+header-y += atmarp.h
+header-y += atmbr2684.h
+header-y += atmclip.h
+header-y += atmdev.h
+header-y += atmioc.h
+header-y += atmlec.h
+header-y += atmmpc.h
+header-y += atmppp.h
+header-y += atmsap.h
+header-y += atmsvc.h
+header-y += audit.h
+header-y += auto_fs.h
+header-y += auto_fs4.h
+header-y += auxvec.h
+header-y += ax25.h
+header-y += b1lli.h
+header-y += baycom.h
+header-y += bfs_fs.h
+header-y += binfmts.h
+header-y += blkpg.h
+header-y += blktrace_api.h
+header-y += bpqether.h
+header-y += bsg.h
+header-y += can.h
+header-y += capability.h
+header-y += capi.h
+header-y += cciss_defs.h
+header-y += cciss_ioctl.h
+header-y += cdrom.h
+header-y += cgroupstats.h
+header-y += chio.h
+header-y += cm4000_cs.h
+header-y += cn_proc.h
+header-y += coda.h
+header-y += coda_psdev.h
+header-y += coff.h
+header-y += connector.h
+header-y += const.h
+header-y += cramfs_fs.h
+header-y += cuda.h
+header-y += cyclades.h
+header-y += cycx_cfm.h
+header-y += dcbnl.h
+header-y += dccp.h
+header-y += dlm.h
+header-y += dlm_device.h
+header-y += dlm_netlink.h
+header-y += dlm_plock.h
+header-y += dlmconstants.h
+header-y += dm-ioctl.h
+header-y += dm-log-userspace.h
+header-y += dn.h
+header-y += dqblk_xfs.h
+header-y += edd.h
+header-y += efs_fs_sb.h
+header-y += elf-em.h
+header-y += elf-fdpic.h
+header-y += elf.h
+header-y += elfcore.h
+header-y += errno.h
+header-y += errqueue.h
+header-y += ethtool.h
+header-y += eventpoll.h
+header-y += fadvise.h
+header-y += falloc.h
+header-y += fanotify.h
+header-y += fb.h
+header-y += fcntl.h
+header-y += fd.h
+header-y += fdreg.h
+header-y += fib_rules.h
+header-y += fiemap.h
+header-y += filter.h
+header-y += firewire-cdev.h
+header-y += firewire-constants.h
+header-y += flat.h
+header-y += fs.h
+header-y += fsl_hypervisor.h
+header-y += fuse.h
+header-y += futex.h
+header-y += gameport.h
+header-y += gen_stats.h
+header-y += genetlink.h
+header-y += gfs2_ondisk.h
+header-y += gigaset_dev.h
+header-y += hdlc.h
+header-y += hdlcdrv.h
+header-y += hdreg.h
+header-y += hid.h
+header-y += hiddev.h
+header-y += hidraw.h
+header-y += hpet.h
+header-y += hysdn_if.h
+header-y += i2c-dev.h
+header-y += i2c.h
+header-y += i2o-dev.h
+header-y += i8k.h
+header-y += icmp.h
+header-y += icmpv6.h
+header-y += if.h
+header-y += if_addr.h
+header-y += if_addrlabel.h
+header-y += if_alg.h
+header-y += if_arcnet.h
+header-y += if_arp.h
+header-y += if_bonding.h
+header-y += if_bridge.h
+header-y += if_cablemodem.h
+header-y += if_eql.h
+header-y += if_ether.h
+header-y += if_fc.h
+header-y += if_fddi.h
+header-y += if_frad.h
+header-y += if_hippi.h
+header-y += if_infiniband.h
+header-y += if_link.h
+header-y += if_ltalk.h
+header-y += if_packet.h
+header-y += if_phonet.h
+header-y += if_plip.h
+header-y += if_ppp.h
+header-y += if_pppol2tp.h
+header-y += if_pppox.h
+header-y += if_slip.h
+header-y += if_team.h
+header-y += if_tun.h
+header-y += if_tunnel.h
+header-y += if_vlan.h
+header-y += if_x25.h
+header-y += igmp.h
+header-y += in.h
+header-y += in6.h
+header-y += in_route.h
+header-y += inet_diag.h
+header-y += inotify.h
+header-y += input.h
+header-y += ioctl.h
+header-y += ip.h
+header-y += ip6_tunnel.h
+header-y += ip_vs.h
+header-y += ipc.h
+header-y += ipmi.h
+header-y += ipmi_msgdefs.h
+header-y += ipsec.h
+header-y += ipv6.h
+header-y += ipv6_route.h
+header-y += ipx.h
+header-y += irda.h
+header-y += irqnr.h
+header-y += isdn.h
+header-y += isdn_divertif.h
+header-y += isdn_ppp.h
+header-y += isdnif.h
+header-y += iso_fs.h
+header-y += ivtv.h
+header-y += ivtvfb.h
+header-y += ixjuser.h
+header-y += jffs2.h
+header-y += joystick.h
+header-y += kd.h
+header-y += kdev_t.h
+header-y += kernel-page-flags.h
+header-y += kernel.h
+header-y += kernelcapi.h
+header-y += kexec.h
+header-y += keyboard.h
+header-y += keyctl.h
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h \
+		  $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h),)
+header-y += kvm.h
+endif
+
+
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h \
+		  $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h),)
+header-y += kvm_para.h
+endif
+
+header-y += l2tp.h
+header-y += limits.h
+header-y += llc.h
+header-y += loop.h
+header-y += lp.h
+header-y += magic.h
+header-y += major.h
+header-y += map_to_7segment.h
+header-y += matroxfb.h
+header-y += mdio.h
+header-y += media.h
+header-y += mei.h
+header-y += mempolicy.h
+header-y += meye.h
+header-y += mii.h
+header-y += minix_fs.h
+header-y += mman.h
+header-y += mmtimer.h
+header-y += mqueue.h
+header-y += mroute.h
+header-y += mroute6.h
+header-y += msdos_fs.h
+header-y += msg.h
+header-y += mtio.h
+header-y += n_r3964.h
+header-y += nbd.h
+header-y += ncp.h
+header-y += ncp_fs.h
+header-y += ncp_mount.h
+header-y += ncp_no.h
+header-y += neighbour.h
+header-y += net.h
+header-y += net_dropmon.h
+header-y += net_tstamp.h
+header-y += netdevice.h
+header-y += netfilter.h
+header-y += netfilter_arp.h
+header-y += netfilter_bridge.h
+header-y += netfilter_decnet.h
+header-y += netfilter_ipv4.h
+header-y += netfilter_ipv6.h
+header-y += netlink.h
+header-y += netrom.h
+header-y += nfc.h
+header-y += nfs.h
+header-y += nfs2.h
+header-y += nfs3.h
+header-y += nfs4.h
+header-y += nfs4_mount.h
+header-y += nfs_fs.h
+header-y += nfs_idmap.h
+header-y += nfs_mount.h
+header-y += nfsacl.h
+header-y += nl80211.h
+header-y += nubus.h
+header-y += nvram.h
+header-y += omap3isp.h
+header-y += omapfb.h
+header-y += oom.h
+header-y += packet_diag.h
+header-y += param.h
+header-y += parport.h
+header-y += patchkey.h
+header-y += pci.h
+header-y += pci_regs.h
+header-y += perf_event.h
+header-y += personality.h
+header-y += pfkeyv2.h
+header-y += pg.h
+header-y += phantom.h
+header-y += phonet.h
+header-y += pkt_cls.h
+header-y += pkt_sched.h
+header-y += pktcdvd.h
+header-y += pmu.h
+header-y += poll.h
+header-y += posix_types.h
+header-y += ppdev.h
+header-y += ppp-comp.h
+header-y += ppp-ioctl.h
+header-y += ppp_defs.h
+header-y += pps.h
+header-y += prctl.h
+header-y += ptp_clock.h
+header-y += ptrace.h
+header-y += qnx4_fs.h
+header-y += qnxtypes.h
+header-y += quota.h
+header-y += radeonfb.h
+header-y += random.h
+header-y += raw.h
+header-y += rds.h
+header-y += reboot.h
+header-y += reiserfs_fs.h
+header-y += reiserfs_xattr.h
+header-y += resource.h
+header-y += rfkill.h
+header-y += romfs_fs.h
+header-y += rose.h
+header-y += route.h
+header-y += rtc.h
+header-y += rtnetlink.h
+header-y += scc.h
+header-y += sched.h
+header-y += screen_info.h
+header-y += sdla.h
+header-y += seccomp.h
+header-y += securebits.h
+header-y += selinux_netlink.h
+header-y += sem.h
+header-y += serial.h
+header-y += serial_core.h
+header-y += serial_reg.h
+header-y += serio.h
+header-y += shm.h
+header-y += signal.h
+header-y += signalfd.h
+header-y += snmp.h
+header-y += sock_diag.h
+header-y += socket.h
+header-y += sockios.h
+header-y += som.h
+header-y += sonet.h
+header-y += sonypi.h
+header-y += sound.h
+header-y += soundcard.h
+header-y += stat.h
+header-y += stddef.h
+header-y += string.h
+header-y += suspend_ioctls.h
+header-y += swab.h
+header-y += synclink.h
+header-y += sysctl.h
+header-y += sysinfo.h
+header-y += taskstats.h
+header-y += tcp.h
+header-y += tcp_metrics.h
+header-y += telephony.h
+header-y += termios.h
+header-y += time.h
+header-y += times.h
+header-y += timex.h
+header-y += tiocl.h
+header-y += tipc.h
+header-y += tipc_config.h
+header-y += toshiba.h
+header-y += tty.h
+header-y += tty_flags.h
+header-y += types.h
+header-y += udf_fs_i.h
+header-y += udp.h
+header-y += uhid.h
+header-y += uinput.h
+header-y += uio.h
+header-y += ultrasound.h
+header-y += un.h
+header-y += unistd.h
+header-y += unix_diag.h
+header-y += usbdevice_fs.h
+header-y += utime.h
+header-y += utsname.h
+header-y += uuid.h
+header-y += uvcvideo.h
+header-y += v4l2-common.h
+header-y += v4l2-controls.h
+header-y += v4l2-dv-timings.h
+header-y += v4l2-mediabus.h
+header-y += v4l2-subdev.h
+header-y += veth.h
+header-y += vfio.h
+header-y += vhost.h
+header-y += videodev2.h
+header-y += virtio_9p.h
+header-y += virtio_balloon.h
+header-y += virtio_blk.h
+header-y += virtio_config.h
+header-y += virtio_console.h
+header-y += virtio_ids.h
+header-y += virtio_net.h
+header-y += virtio_pci.h
+header-y += virtio_ring.h
+header-y += virtio_rng.h
+header-y += vt.h
+header-y += wait.h
+header-y += wanrouter.h
+header-y += watchdog.h
+header-y += wimax.h
+header-y += wireless.h
+header-y += x25.h
+header-y += xattr.h
+header-y += xfrm.h
diff --git a/include/uapi/linux/a.out.h b/include/uapi/linux/a.out.h
new file mode 100644
index 0000000..7caf44c
--- /dev/null
+++ b/include/uapi/linux/a.out.h
@@ -0,0 +1,274 @@
+#ifndef _UAPI__A_OUT_GNU_H__
+#define _UAPI__A_OUT_GNU_H__
+
+#define __GNU_EXEC_MACROS__
+
+#ifndef __STRUCT_EXEC_OVERRIDE__
+
+#include <asm/a.out.h>
+
+#endif /* __STRUCT_EXEC_OVERRIDE__ */
+
+#ifndef __ASSEMBLY__
+
+/* these go in the N_MACHTYPE field */
+enum machine_type {
+#if defined (M_OLDSUN2)
+  M__OLDSUN2 = M_OLDSUN2,
+#else
+  M_OLDSUN2 = 0,
+#endif
+#if defined (M_68010)
+  M__68010 = M_68010,
+#else
+  M_68010 = 1,
+#endif
+#if defined (M_68020)
+  M__68020 = M_68020,
+#else
+  M_68020 = 2,
+#endif
+#if defined (M_SPARC)
+  M__SPARC = M_SPARC,
+#else
+  M_SPARC = 3,
+#endif
+  /* skip a bunch so we don't run into any of sun's numbers */
+  M_386 = 100,
+  M_MIPS1 = 151,	/* MIPS R3000/R3000 binary */
+  M_MIPS2 = 152		/* MIPS R6000/R4000 binary */
+};
+
+#if !defined (N_MAGIC)
+#define N_MAGIC(exec) ((exec).a_info & 0xffff)
+#endif
+#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
+#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
+#define N_SET_INFO(exec, magic, type, flags) \
+	((exec).a_info = ((magic) & 0xffff) \
+	 | (((int)(type) & 0xff) << 16) \
+	 | (((flags) & 0xff) << 24))
+#define N_SET_MAGIC(exec, magic) \
+	((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
+
+#define N_SET_MACHTYPE(exec, machtype) \
+	((exec).a_info = \
+	 ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
+
+#define N_SET_FLAGS(exec, flags) \
+	((exec).a_info = \
+	 ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
+
+/* Code indicating object file or impure executable.  */
+#define OMAGIC 0407
+/* Code indicating pure executable.  */
+#define NMAGIC 0410
+/* Code indicating demand-paged executable.  */
+#define ZMAGIC 0413
+/* This indicates a demand-paged executable with the header in the text. 
+   The first page is unmapped to help trap NULL pointer references */
+#define QMAGIC 0314
+
+/* Code indicating core file.  */
+#define CMAGIC 0421
+
+#if !defined (N_BADMAG)
+#define N_BADMAG(x)	  (N_MAGIC(x) != OMAGIC		\
+			&& N_MAGIC(x) != NMAGIC		\
+  			&& N_MAGIC(x) != ZMAGIC \
+		        && N_MAGIC(x) != QMAGIC)
+#endif
+
+#define _N_HDROFF(x) (1024 - sizeof (struct exec))
+
+#if !defined (N_TXTOFF)
+#define N_TXTOFF(x) \
+ (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
+  (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
+#endif
+
+#if !defined (N_DATOFF)
+#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
+#endif
+
+#if !defined (N_TRELOFF)
+#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
+#endif
+
+#if !defined (N_DRELOFF)
+#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
+#endif
+
+#if !defined (N_SYMOFF)
+#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
+#endif
+
+#if !defined (N_STROFF)
+#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
+#endif
+
+/* Address of text segment in memory after it is loaded.  */
+#if !defined (N_TXTADDR)
+#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
+#endif
+
+/* Address of data segment in memory after it is loaded.
+   Note that it is up to you to define SEGMENT_SIZE
+   on machines not listed here.  */
+#if defined(vax) || defined(hp300) || defined(pyr)
+#define SEGMENT_SIZE page_size
+#endif
+#ifdef	sony
+#define	SEGMENT_SIZE	0x2000
+#endif	/* Sony.  */
+#ifdef is68k
+#define SEGMENT_SIZE 0x20000
+#endif
+#if defined(m68k) && defined(PORTAR)
+#define PAGE_SIZE 0x400
+#define SEGMENT_SIZE PAGE_SIZE
+#endif
+
+#ifdef linux
+#ifndef __KERNEL__
+#include <unistd.h>
+#endif
+#if defined(__i386__) || defined(__mc68000__)
+#define SEGMENT_SIZE	1024
+#else
+#ifndef SEGMENT_SIZE
+#ifndef __KERNEL__
+#define SEGMENT_SIZE   getpagesize()
+#endif
+#endif
+#endif
+#endif
+
+#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
+
+#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
+
+#ifndef N_DATADDR
+#define N_DATADDR(x) \
+    (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
+     : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
+#endif
+
+/* Address of bss segment in memory after it is loaded.  */
+#if !defined (N_BSSADDR)
+#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
+#endif
+
+#if !defined (N_NLIST_DECLARED)
+struct nlist {
+  union {
+    char *n_name;
+    struct nlist *n_next;
+    long n_strx;
+  } n_un;
+  unsigned char n_type;
+  char n_other;
+  short n_desc;
+  unsigned long n_value;
+};
+#endif /* no N_NLIST_DECLARED.  */
+
+#if !defined (N_UNDF)
+#define N_UNDF 0
+#endif
+#if !defined (N_ABS)
+#define N_ABS 2
+#endif
+#if !defined (N_TEXT)
+#define N_TEXT 4
+#endif
+#if !defined (N_DATA)
+#define N_DATA 6
+#endif
+#if !defined (N_BSS)
+#define N_BSS 8
+#endif
+#if !defined (N_FN)
+#define N_FN 15
+#endif
+
+#if !defined (N_EXT)
+#define N_EXT 1
+#endif
+#if !defined (N_TYPE)
+#define N_TYPE 036
+#endif
+#if !defined (N_STAB)
+#define N_STAB 0340
+#endif
+
+/* The following type indicates the definition of a symbol as being
+   an indirect reference to another symbol.  The other symbol
+   appears as an undefined reference, immediately following this symbol.
+
+   Indirection is asymmetrical.  The other symbol's value will be used
+   to satisfy requests for the indirect symbol, but not vice versa.
+   If the other symbol does not have a definition, libraries will
+   be searched to find a definition.  */
+#define N_INDR 0xa
+
+/* The following symbols refer to set elements.
+   All the N_SET[ATDB] symbols with the same name form one set.
+   Space is allocated for the set in the text section, and each set
+   element's value is stored into one word of the space.
+   The first word of the space is the length of the set (number of elements).
+
+   The address of the set is made into an N_SETV symbol
+   whose name is the same as the name of the set.
+   This symbol acts like a N_DATA global symbol
+   in that it can satisfy undefined external references.  */
+
+/* These appear as input to LD, in a .o file.  */
+#define	N_SETA	0x14		/* Absolute set element symbol */
+#define	N_SETT	0x16		/* Text set element symbol */
+#define	N_SETD	0x18		/* Data set element symbol */
+#define	N_SETB	0x1A		/* Bss set element symbol */
+
+/* This is output from LD.  */
+#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
+
+#if !defined (N_RELOCATION_INFO_DECLARED)
+/* This structure describes a single relocation to be performed.
+   The text-relocation section of the file is a vector of these structures,
+   all of which apply to the text section.
+   Likewise, the data-relocation section applies to the data section.  */
+
+struct relocation_info
+{
+  /* Address (within segment) to be relocated.  */
+  int r_address;
+  /* The meaning of r_symbolnum depends on r_extern.  */
+  unsigned int r_symbolnum:24;
+  /* Nonzero means value is a pc-relative offset
+     and it should be relocated for changes in its own address
+     as well as for changes in the symbol or section specified.  */
+  unsigned int r_pcrel:1;
+  /* Length (as exponent of 2) of the field to be relocated.
+     Thus, a value of 2 indicates 1<<2 bytes.  */
+  unsigned int r_length:2;
+  /* 1 => relocate with value of symbol.
+          r_symbolnum is the index of the symbol
+	  in file's the symbol table.
+     0 => relocate with the address of a segment.
+          r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
+	  (the N_EXT bit may be set also, but signifies nothing).  */
+  unsigned int r_extern:1;
+  /* Four bits that aren't used, but when writing an object file
+     it is desirable to clear them.  */
+#ifdef NS32K
+  unsigned r_bsr:1;
+  unsigned r_disp:1;
+  unsigned r_pad:2;
+#else
+  unsigned int r_pad:4;
+#endif
+};
+#endif /* no N_RELOCATION_INFO_DECLARED.  */
+
+#endif /*__ASSEMBLY__ */
+#endif /* _UAPI__A_OUT_GNU_H__ */
diff --git a/include/uapi/linux/acct.h b/include/uapi/linux/acct.h
new file mode 100644
index 0000000..11b6ca3
--- /dev/null
+++ b/include/uapi/linux/acct.h
@@ -0,0 +1,122 @@
+/*
+ *  BSD Process Accounting for Linux - Definitions
+ *
+ *  Author: Marco van Wieringen (mvw@planets.elm.net)
+ *
+ *  This header file contains the definitions needed to implement
+ *  BSD-style process accounting. The kernel accounting code and all
+ *  user-level programs that try to do something useful with the
+ *  process accounting log must include this file.
+ *
+ *  Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V.
+ *
+ */
+
+#ifndef _UAPI_LINUX_ACCT_H
+#define _UAPI_LINUX_ACCT_H
+
+#include <linux/types.h>
+
+#include <asm/param.h>
+#include <asm/byteorder.h>
+
+/* 
+ *  comp_t is a 16-bit "floating" point number with a 3-bit base 8
+ *  exponent and a 13-bit fraction.
+ *  comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction
+ *  (leading 1 not stored).
+ *  See linux/kernel/acct.c for the specific encoding systems used.
+ */
+
+typedef __u16	comp_t;
+typedef __u32	comp2_t;
+
+/*
+ *   accounting file record
+ *
+ *   This structure contains all of the information written out to the
+ *   process accounting file whenever a process exits.
+ */
+
+#define ACCT_COMM	16
+
+struct acct
+{
+	char		ac_flag;		/* Flags */
+	char		ac_version;		/* Always set to ACCT_VERSION */
+	/* for binary compatibility back until 2.0 */
+	__u16		ac_uid16;		/* LSB of Real User ID */
+	__u16		ac_gid16;		/* LSB of Real Group ID */
+	__u16		ac_tty;			/* Control Terminal */
+	__u32		ac_btime;		/* Process Creation Time */
+	comp_t		ac_utime;		/* User Time */
+	comp_t		ac_stime;		/* System Time */
+	comp_t		ac_etime;		/* Elapsed Time */
+	comp_t		ac_mem;			/* Average Memory Usage */
+	comp_t		ac_io;			/* Chars Transferred */
+	comp_t		ac_rw;			/* Blocks Read or Written */
+	comp_t		ac_minflt;		/* Minor Pagefaults */
+	comp_t		ac_majflt;		/* Major Pagefaults */
+	comp_t		ac_swaps;		/* Number of Swaps */
+/* m68k had no padding here. */
+#if !defined(CONFIG_M68K) || !defined(__KERNEL__)
+	__u16		ac_ahz;			/* AHZ */
+#endif
+	__u32		ac_exitcode;		/* Exitcode */
+	char		ac_comm[ACCT_COMM + 1];	/* Command Name */
+	__u8		ac_etime_hi;		/* Elapsed Time MSB */
+	__u16		ac_etime_lo;		/* Elapsed Time LSB */
+	__u32		ac_uid;			/* Real User ID */
+	__u32		ac_gid;			/* Real Group ID */
+};
+
+struct acct_v3
+{
+	char		ac_flag;		/* Flags */
+	char		ac_version;		/* Always set to ACCT_VERSION */
+	__u16		ac_tty;			/* Control Terminal */
+	__u32		ac_exitcode;		/* Exitcode */
+	__u32		ac_uid;			/* Real User ID */
+	__u32		ac_gid;			/* Real Group ID */
+	__u32		ac_pid;			/* Process ID */
+	__u32		ac_ppid;		/* Parent Process ID */
+	__u32		ac_btime;		/* Process Creation Time */
+#ifdef __KERNEL__
+	__u32		ac_etime;		/* Elapsed Time */
+#else
+	float		ac_etime;		/* Elapsed Time */
+#endif
+	comp_t		ac_utime;		/* User Time */
+	comp_t		ac_stime;		/* System Time */
+	comp_t		ac_mem;			/* Average Memory Usage */
+	comp_t		ac_io;			/* Chars Transferred */
+	comp_t		ac_rw;			/* Blocks Read or Written */
+	comp_t		ac_minflt;		/* Minor Pagefaults */
+	comp_t		ac_majflt;		/* Major Pagefaults */
+	comp_t		ac_swaps;		/* Number of Swaps */
+	char		ac_comm[ACCT_COMM];	/* Command Name */
+};
+
+/*
+ *  accounting flags
+ */
+				/* bit set when the process ... */
+#define AFORK		0x01	/* ... executed fork, but did not exec */
+#define ASU		0x02	/* ... used super-user privileges */
+#define ACOMPAT		0x04	/* ... used compatibility mode (VAX only not used) */
+#define ACORE		0x08	/* ... dumped core */
+#define AXSIG		0x10	/* ... was killed by a signal */
+
+#ifdef __BIG_ENDIAN
+#define ACCT_BYTEORDER	0x80	/* accounting file is big endian */
+#else
+#define ACCT_BYTEORDER	0x00	/* accounting file is little endian */
+#endif
+
+#ifndef __KERNEL__
+#define ACCT_VERSION	2
+#define AHZ		(HZ)
+#endif	/* __KERNEL */
+
+
+#endif /* _UAPI_LINUX_ACCT_H */
diff --git a/include/uapi/linux/adb.h b/include/uapi/linux/adb.h
new file mode 100644
index 0000000..0ea1075
--- /dev/null
+++ b/include/uapi/linux/adb.h
@@ -0,0 +1,44 @@
+/*
+ * Definitions for ADB (Apple Desktop Bus) support.
+ */
+#ifndef _UAPI__ADB_H
+#define _UAPI__ADB_H
+
+/* ADB commands */
+#define ADB_BUSRESET		0
+#define ADB_FLUSH(id)		(0x01 | ((id) << 4))
+#define ADB_WRITEREG(id, reg)	(0x08 | (reg) | ((id) << 4))
+#define ADB_READREG(id, reg)	(0x0C | (reg) | ((id) << 4))
+
+/* ADB default device IDs (upper 4 bits of ADB command byte) */
+#define ADB_DONGLE	1	/* "software execution control" devices */
+#define ADB_KEYBOARD	2
+#define ADB_MOUSE	3
+#define ADB_TABLET	4
+#define ADB_MODEM	5
+#define ADB_MISC	7	/* maybe a monitor */
+
+#define ADB_RET_OK	0
+#define ADB_RET_TIMEOUT	3
+
+/* The kind of ADB request. The controller may emulate some
+   or all of those CUDA/PMU packet kinds */
+#define ADB_PACKET	0
+#define CUDA_PACKET	1
+#define ERROR_PACKET	2
+#define TIMER_PACKET	3
+#define POWER_PACKET	4
+#define MACIIC_PACKET	5
+#define PMU_PACKET	6
+#define ADB_QUERY	7
+
+/* ADB queries */
+
+/* ADB_QUERY_GETDEVINFO
+ * Query ADB slot for device presence
+ * data[2] = id, rep[0] = orig addr, rep[1] = handler_id
+ */
+#define ADB_QUERY_GETDEVINFO	1
+
+
+#endif /* _UAPI__ADB_H */
diff --git a/include/uapi/linux/adfs_fs.h b/include/uapi/linux/adfs_fs.h
new file mode 100644
index 0000000..a1bf437
--- /dev/null
+++ b/include/uapi/linux/adfs_fs.h
@@ -0,0 +1,44 @@
+#ifndef _UAPI_ADFS_FS_H
+#define _UAPI_ADFS_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/*
+ * Disc Record at disc address 0xc00
+ */
+struct adfs_discrecord {
+    __u8  log2secsize;
+    __u8  secspertrack;
+    __u8  heads;
+    __u8  density;
+    __u8  idlen;
+    __u8  log2bpmb;
+    __u8  skew;
+    __u8  bootoption;
+    __u8  lowsector;
+    __u8  nzones;
+    __le16 zone_spare;
+    __le32 root;
+    __le32 disc_size;
+    __le16 disc_id;
+    __u8  disc_name[10];
+    __le32 disc_type;
+    __le32 disc_size_high;
+    __u8  log2sharesize:4;
+    __u8  unused40:4;
+    __u8  big_flag:1;
+    __u8  unused41:1;
+    __u8  nzones_high;
+    __le32 format_version;
+    __le32 root_size;
+    __u8  unused52[60 - 52];
+};
+
+#define ADFS_DISCRECORD		(0xc00)
+#define ADFS_DR_OFFSET		(0x1c0)
+#define ADFS_DR_SIZE		 60
+#define ADFS_DR_SIZE_BITS	(ADFS_DR_SIZE << 3)
+
+
+#endif /* _UAPI_ADFS_FS_H */
diff --git a/include/linux/affs_hardblocks.h b/include/uapi/linux/affs_hardblocks.h
similarity index 100%
rename from include/linux/affs_hardblocks.h
rename to include/uapi/linux/affs_hardblocks.h
diff --git a/include/uapi/linux/agpgart.h b/include/uapi/linux/agpgart.h
new file mode 100644
index 0000000..4e828cf
--- /dev/null
+++ b/include/uapi/linux/agpgart.h
@@ -0,0 +1,113 @@
+/*
+ * AGPGART module version 0.99
+ * Copyright (C) 1999 Jeff Hartmann
+ * Copyright (C) 1999 Precision Insight, Inc.
+ * Copyright (C) 1999 Xi Graphics, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * JEFF HARTMANN, OR ANY OTHER CONTRIBUTORS BE LIABLE FOR ANY CLAIM, 
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR 
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE 
+ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef _UAPI_AGP_H
+#define _UAPI_AGP_H
+
+#define AGPIOC_BASE       'A'
+#define AGPIOC_INFO       _IOR (AGPIOC_BASE, 0, struct agp_info*)
+#define AGPIOC_ACQUIRE    _IO  (AGPIOC_BASE, 1)
+#define AGPIOC_RELEASE    _IO  (AGPIOC_BASE, 2)
+#define AGPIOC_SETUP      _IOW (AGPIOC_BASE, 3, struct agp_setup*)
+#define AGPIOC_RESERVE    _IOW (AGPIOC_BASE, 4, struct agp_region*)
+#define AGPIOC_PROTECT    _IOW (AGPIOC_BASE, 5, struct agp_region*)
+#define AGPIOC_ALLOCATE   _IOWR(AGPIOC_BASE, 6, struct agp_allocate*)
+#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int)
+#define AGPIOC_BIND       _IOW (AGPIOC_BASE, 8, struct agp_bind*)
+#define AGPIOC_UNBIND     _IOW (AGPIOC_BASE, 9, struct agp_unbind*)
+#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10)
+
+#define AGP_DEVICE      "/dev/agpgart"
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#ifndef __KERNEL__
+#include <linux/types.h>
+
+struct agp_version {
+	__u16 major;
+	__u16 minor;
+};
+
+typedef struct _agp_info {
+	struct agp_version version;	/* version of the driver        */
+	__u32 bridge_id;	/* bridge vendor/device         */
+	__u32 agp_mode;		/* mode info of bridge          */
+	unsigned long aper_base;/* base of aperture             */
+	size_t aper_size;	/* size of aperture             */
+	size_t pg_total;	/* max pages (swap + system)    */
+	size_t pg_system;	/* max pages (system)           */
+	size_t pg_used;		/* current pages used           */
+} agp_info;
+
+typedef struct _agp_setup {
+	__u32 agp_mode;		/* mode info of bridge          */
+} agp_setup;
+
+/*
+ * The "prot" down below needs still a "sleep" flag somehow ...
+ */
+typedef struct _agp_segment {
+	__kernel_off_t pg_start;	/* starting page to populate    */
+	__kernel_size_t pg_count;	/* number of pages              */
+	int prot;			/* prot flags for mmap          */
+} agp_segment;
+
+typedef struct _agp_region {
+	__kernel_pid_t pid;		/* pid of process       */
+	__kernel_size_t seg_count;	/* number of segments   */
+	struct _agp_segment *seg_list;
+} agp_region;
+
+typedef struct _agp_allocate {
+	int key;		/* tag of allocation            */
+	__kernel_size_t pg_count;/* number of pages             */
+	__u32 type;		/* 0 == normal, other devspec   */
+   	__u32 physical;         /* device specific (some devices  
+				 * need a phys address of the     
+				 * actual page behind the gatt    
+				 * table)                        */
+} agp_allocate;
+
+typedef struct _agp_bind {
+	int key;		/* tag of allocation            */
+	__kernel_off_t pg_start;/* starting page to populate    */
+} agp_bind;
+
+typedef struct _agp_unbind {
+	int key;		/* tag of allocation            */
+	__u32 priority;		/* priority for paging out      */
+} agp_unbind;
+
+#endif				/* __KERNEL__ */
+
+#endif /* _UAPI_AGP_H */
diff --git a/include/linux/aio_abi.h b/include/uapi/linux/aio_abi.h
similarity index 100%
rename from include/linux/aio_abi.h
rename to include/uapi/linux/aio_abi.h
diff --git a/include/uapi/linux/apm_bios.h b/include/uapi/linux/apm_bios.h
new file mode 100644
index 0000000..724f409
--- /dev/null
+++ b/include/uapi/linux/apm_bios.h
@@ -0,0 +1,135 @@
+/*
+ * Include file for the interface to an APM BIOS
+ * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#ifndef _UAPI_LINUX_APM_H
+#define _UAPI_LINUX_APM_H
+
+
+#include <linux/types.h>
+
+typedef unsigned short	apm_event_t;
+typedef unsigned short	apm_eventinfo_t;
+
+struct apm_bios_info {
+	__u16	version;
+	__u16	cseg;
+	__u32	offset;
+	__u16	cseg_16;
+	__u16	dseg;
+	__u16	flags;
+	__u16	cseg_len;
+	__u16	cseg_16_len;
+	__u16	dseg_len;
+};
+
+
+/*
+ * Power states
+ */
+#define APM_STATE_READY		0x0000
+#define APM_STATE_STANDBY	0x0001
+#define APM_STATE_SUSPEND	0x0002
+#define APM_STATE_OFF		0x0003
+#define APM_STATE_BUSY		0x0004
+#define APM_STATE_REJECT	0x0005
+#define APM_STATE_OEM_SYS	0x0020
+#define APM_STATE_OEM_DEV	0x0040
+
+#define APM_STATE_DISABLE	0x0000
+#define APM_STATE_ENABLE	0x0001
+
+#define APM_STATE_DISENGAGE	0x0000
+#define APM_STATE_ENGAGE	0x0001
+
+/*
+ * Events (results of Get PM Event)
+ */
+#define APM_SYS_STANDBY		0x0001
+#define APM_SYS_SUSPEND		0x0002
+#define APM_NORMAL_RESUME	0x0003
+#define APM_CRITICAL_RESUME	0x0004
+#define APM_LOW_BATTERY		0x0005
+#define APM_POWER_STATUS_CHANGE	0x0006
+#define APM_UPDATE_TIME		0x0007
+#define APM_CRITICAL_SUSPEND	0x0008
+#define APM_USER_STANDBY	0x0009
+#define APM_USER_SUSPEND	0x000a
+#define APM_STANDBY_RESUME	0x000b
+#define APM_CAPABILITY_CHANGE	0x000c
+
+/*
+ * Error codes
+ */
+#define APM_SUCCESS		0x00
+#define APM_DISABLED		0x01
+#define APM_CONNECTED		0x02
+#define APM_NOT_CONNECTED	0x03
+#define APM_16_CONNECTED	0x05
+#define APM_16_UNSUPPORTED	0x06
+#define APM_32_CONNECTED	0x07
+#define APM_32_UNSUPPORTED	0x08
+#define APM_BAD_DEVICE		0x09
+#define APM_BAD_PARAM		0x0a
+#define APM_NOT_ENGAGED		0x0b
+#define APM_BAD_FUNCTION	0x0c
+#define APM_RESUME_DISABLED	0x0d
+#define APM_NO_ERROR		0x53
+#define APM_BAD_STATE		0x60
+#define APM_NO_EVENTS		0x80
+#define APM_NOT_PRESENT		0x86
+
+/*
+ * APM Device IDs
+ */
+#define APM_DEVICE_BIOS		0x0000
+#define APM_DEVICE_ALL		0x0001
+#define APM_DEVICE_DISPLAY	0x0100
+#define APM_DEVICE_STORAGE	0x0200
+#define APM_DEVICE_PARALLEL	0x0300
+#define APM_DEVICE_SERIAL	0x0400
+#define APM_DEVICE_NETWORK	0x0500
+#define APM_DEVICE_PCMCIA	0x0600
+#define APM_DEVICE_BATTERY	0x8000
+#define APM_DEVICE_OEM		0xe000
+#define APM_DEVICE_OLD_ALL	0xffff
+#define APM_DEVICE_CLASS	0x00ff
+#define APM_DEVICE_MASK		0xff00
+
+
+/*
+ * Battery status
+ */
+#define APM_MAX_BATTERIES	2
+
+/*
+ * APM defined capability bit flags
+ */
+#define APM_CAP_GLOBAL_STANDBY		0x0001
+#define APM_CAP_GLOBAL_SUSPEND		0x0002
+#define APM_CAP_RESUME_STANDBY_TIMER	0x0004 /* Timer resume from standby */
+#define APM_CAP_RESUME_SUSPEND_TIMER	0x0008 /* Timer resume from suspend */
+#define APM_CAP_RESUME_STANDBY_RING	0x0010 /* Resume on Ring fr standby */
+#define APM_CAP_RESUME_SUSPEND_RING	0x0020 /* Resume on Ring fr suspend */
+#define APM_CAP_RESUME_STANDBY_PCMCIA	0x0040 /* Resume on PCMCIA Ring	*/
+#define APM_CAP_RESUME_SUSPEND_PCMCIA	0x0080 /* Resume on PCMCIA Ring	*/
+
+/*
+ * ioctl operations
+ */
+#include <linux/ioctl.h>
+
+#define APM_IOC_STANDBY		_IO('A', 1)
+#define APM_IOC_SUSPEND		_IO('A', 2)
+
+#endif /* _UAPI_LINUX_APM_H */
diff --git a/include/linux/arcfb.h b/include/uapi/linux/arcfb.h
similarity index 100%
rename from include/linux/arcfb.h
rename to include/uapi/linux/arcfb.h
diff --git a/include/uapi/linux/atalk.h b/include/uapi/linux/atalk.h
new file mode 100644
index 0000000..4bcd596
--- /dev/null
+++ b/include/uapi/linux/atalk.h
@@ -0,0 +1,44 @@
+#ifndef _UAPI__LINUX_ATALK_H__
+#define _UAPI__LINUX_ATALK_H__
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/socket.h>
+
+/*
+ * AppleTalk networking structures
+ *
+ * The following are directly referenced from the University Of Michigan
+ * netatalk for compatibility reasons.
+ */
+#define ATPORT_FIRST	1
+#define ATPORT_RESERVED	128
+#define ATPORT_LAST	254		/* 254 is only legal on localtalk */ 
+#define ATADDR_ANYNET	(__u16)0
+#define ATADDR_ANYNODE	(__u8)0
+#define ATADDR_ANYPORT  (__u8)0
+#define ATADDR_BCAST	(__u8)255
+#define DDP_MAXSZ	587
+#define DDP_MAXHOPS     15		/* 4 bits of hop counter */
+
+#define SIOCATALKDIFADDR       (SIOCPROTOPRIVATE + 0)
+
+struct atalk_addr {
+	__be16	s_net;
+	__u8	s_node;
+};
+
+struct sockaddr_at {
+	__kernel_sa_family_t sat_family;
+	__u8		  sat_port;
+	struct atalk_addr sat_addr;
+	char		  sat_zero[8];
+};
+
+struct atalk_netrange {
+	__u8	nr_phase;
+	__be16	nr_firstnet;
+	__be16	nr_lastnet;
+};
+
+#endif /* _UAPI__LINUX_ATALK_H__ */
diff --git a/include/uapi/linux/atm.h b/include/uapi/linux/atm.h
new file mode 100644
index 0000000..88399db
--- /dev/null
+++ b/include/uapi/linux/atm.h
@@ -0,0 +1,241 @@
+/* atm.h - general ATM declarations */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+/*
+ * WARNING: User-space programs should not #include <linux/atm.h> directly.
+ *          Instead, #include <atm.h>
+ */
+
+#ifndef _UAPI_LINUX_ATM_H
+#define _UAPI_LINUX_ATM_H
+
+/*
+ * BEGIN_xx and END_xx markers are used for automatic generation of
+ * documentation. Do not change them.
+ */
+
+#include <linux/compiler.h>
+#include <linux/atmapi.h>
+#include <linux/atmsap.h>
+#include <linux/atmioc.h>
+#include <linux/types.h>
+
+
+/* general ATM constants */
+#define ATM_CELL_SIZE		    53	/* ATM cell size incl. header */
+#define ATM_CELL_PAYLOAD	    48	/* ATM payload size */
+#define ATM_AAL0_SDU		    52	/* AAL0 SDU size */
+#define ATM_MAX_AAL34_PDU	 65535	/* maximum AAL3/4 PDU payload */
+#define ATM_AAL5_TRAILER	     8	/* AAL5 trailer size */
+#define ATM_MAX_AAL5_PDU	 65535	/* maximum AAL5 PDU payload */
+#define ATM_MAX_CDV		  9999	/* maximum (default) CDV */
+#define ATM_NOT_RSV_VCI		    32	/* first non-reserved VCI value */
+
+#define ATM_MAX_VPI		   255	/* maximum VPI at the UNI */
+#define ATM_MAX_VPI_NNI		  4096	/* maximum VPI at the NNI */
+#define ATM_MAX_VCI		 65535	/* maximum VCI */
+
+
+/* "protcol" values for the socket system call */
+#define ATM_NO_AAL	0		/* AAL not specified */
+#define ATM_AAL0	13		/* "raw" ATM cells */
+#define ATM_AAL1	1		/* AAL1 (CBR) */
+#define ATM_AAL2	2		/* AAL2 (VBR) */
+#define ATM_AAL34	3		/* AAL3/4 (data) */
+#define ATM_AAL5	5		/* AAL5 (data) */
+
+/*
+ * socket option name coding functions
+ *
+ * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the
+ * << 22 only reserves 9 bits for the level.  On some architectures
+ * SOL_SOCKET is 0xFFFF, so that's a bit of a problem
+ */
+
+#define __SO_ENCODE(l,n,t)	((((l) & 0x1FF) << 22) | ((n) << 16) | \
+				sizeof(t))
+#define __SO_LEVEL_MATCH(c,m)	(((c) >> 22) == ((m) & 0x1FF))
+#define __SO_NUMBER(c)		(((c) >> 16) & 0x3f)
+#define __SO_SIZE(c)		((c) & 0x3fff)
+
+/*
+ * ATM layer
+ */
+
+#define SO_SETCLP	__SO_ENCODE(SOL_ATM,0,int)
+			    /* set CLP bit value - TODO */
+#define SO_CIRANGE	__SO_ENCODE(SOL_ATM,1,struct atm_cirange)
+			    /* connection identifier range; socket must be
+			       bound or connected */
+#define SO_ATMQOS	__SO_ENCODE(SOL_ATM,2,struct atm_qos)
+			    /* Quality of Service setting */
+#define SO_ATMSAP	__SO_ENCODE(SOL_ATM,3,struct atm_sap)
+			    /* Service Access Point */
+#define SO_ATMPVC	__SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc)
+			    /* "PVC" address (also for SVCs); get only */
+#define SO_MULTIPOINT	__SO_ENCODE(SOL_ATM, 5, int)
+			    /* make this vc a p2mp */
+
+
+/*
+ * Note @@@: since the socket layers don't really distinguish the control and
+ * the data plane but generally seems to be data plane-centric, any layer is
+ * about equally wrong for the SAP. If you have a better idea about this,
+ * please speak up ...
+ */
+
+
+/* ATM cell header (for AAL0) */
+
+/* BEGIN_CH */
+#define ATM_HDR_GFC_MASK	0xf0000000
+#define ATM_HDR_GFC_SHIFT	28
+#define ATM_HDR_VPI_MASK	0x0ff00000
+#define ATM_HDR_VPI_SHIFT	20
+#define ATM_HDR_VCI_MASK	0x000ffff0
+#define ATM_HDR_VCI_SHIFT	4
+#define ATM_HDR_PTI_MASK	0x0000000e
+#define ATM_HDR_PTI_SHIFT	1
+#define ATM_HDR_CLP		0x00000001
+/* END_CH */
+
+
+/* PTI codings */
+
+/* BEGIN_PTI */
+#define ATM_PTI_US0	0  /* user data cell, congestion not exp, SDU-type 0 */
+#define ATM_PTI_US1	1  /* user data cell, congestion not exp, SDU-type 1 */
+#define ATM_PTI_UCES0	2  /* user data cell, cong. experienced, SDU-type 0 */
+#define ATM_PTI_UCES1	3  /* user data cell, cong. experienced, SDU-type 1 */
+#define ATM_PTI_SEGF5	4  /* segment OAM F5 flow related cell */
+#define ATM_PTI_E2EF5	5  /* end-to-end OAM F5 flow related cell */
+#define ATM_PTI_RSV_RM	6  /* reserved for traffic control/resource mgmt */
+#define ATM_PTI_RSV	7  /* reserved */
+/* END_PTI */
+
+
+/*
+ * The following items should stay in linux/atm.h, which should be linked to
+ * netatm/atm.h
+ */
+
+/* Traffic description */
+
+#define ATM_NONE	0		/* no traffic */
+#define ATM_UBR		1
+#define ATM_CBR		2
+#define ATM_VBR		3
+#define ATM_ABR		4
+#define ATM_ANYCLASS	5		/* compatible with everything */
+
+#define ATM_MAX_PCR	-1		/* maximum available PCR */
+
+struct atm_trafprm {
+	unsigned char	traffic_class;	/* traffic class (ATM_UBR, ...) */
+	int		max_pcr;	/* maximum PCR in cells per second */
+	int		pcr;		/* desired PCR in cells per second */
+	int		min_pcr;	/* minimum PCR in cells per second */
+	int		max_cdv;	/* maximum CDV in microseconds */
+	int		max_sdu;	/* maximum SDU in bytes */
+        /* extra params for ABR */
+        unsigned int 	icr;         	/* Initial Cell Rate (24-bit) */
+        unsigned int	tbe;		/* Transient Buffer Exposure (24-bit) */ 
+        unsigned int 	frtt : 24;	/* Fixed Round Trip Time (24-bit) */
+        unsigned int 	rif  : 4;       /* Rate Increment Factor (4-bit) */
+        unsigned int 	rdf  : 4;       /* Rate Decrease Factor (4-bit) */
+        unsigned int nrm_pres  :1;      /* nrm present bit */
+        unsigned int trm_pres  :1;     	/* rm present bit */
+        unsigned int adtf_pres :1;     	/* adtf present bit */
+        unsigned int cdf_pres  :1;    	/* cdf present bit*/
+        unsigned int nrm       :3;     	/* Max # of Cells for each forward RM cell (3-bit) */
+        unsigned int trm       :3;    	/* Time between forward RM cells (3-bit) */    
+	unsigned int adtf      :10;     /* ACR Decrease Time Factor (10-bit) */
+	unsigned int cdf       :3;      /* Cutoff Decrease Factor (3-bit) */
+        unsigned int spare     :9;      /* spare bits */ 
+};
+
+struct atm_qos {
+	struct atm_trafprm txtp;	/* parameters in TX direction */
+	struct atm_trafprm rxtp __ATM_API_ALIGN;
+					/* parameters in RX direction */
+	unsigned char aal __ATM_API_ALIGN;
+};
+
+/* PVC addressing */
+
+#define ATM_ITF_ANY	-1		/* "magic" PVC address values */
+#define ATM_VPI_ANY	-1
+#define ATM_VCI_ANY	-1
+#define ATM_VPI_UNSPEC	-2
+#define ATM_VCI_UNSPEC	-2
+
+
+struct sockaddr_atmpvc {
+	unsigned short 	sap_family;	/* address family, AF_ATMPVC  */
+	struct {			/* PVC address */
+		short	itf;		/* ATM interface */
+		short	vpi;		/* VPI (only 8 bits at UNI) */
+		int	vci;		/* VCI (only 16 bits at UNI) */
+	} sap_addr __ATM_API_ALIGN;	/* PVC address */
+};
+
+/* SVC addressing */
+
+#define	ATM_ESA_LEN	20		/* ATM End System Address length */
+#define ATM_E164_LEN	12		/* maximum E.164 number length */
+
+#define ATM_AFI_DCC	0x39		/* DCC ATM Format */
+#define ATM_AFI_ICD	0x47		/* ICD ATM Format */
+#define ATM_AFI_E164	0x45		/* E.164 ATM Format */
+#define ATM_AFI_LOCAL	0x49		/* Local ATM Format */ 
+
+#define ATM_AFI_DCC_GROUP	0xBD	/* DCC ATM Group Format */
+#define ATM_AFI_ICD_GROUP	0xC5	/* ICD ATM Group Format */
+#define ATM_AFI_E164_GROUP	0xC3	/* E.164 ATM Group Format */
+#define ATM_AFI_LOCAL_GROUP	0xC7	/* Local ATM Group Format */
+
+#define ATM_LIJ_NONE	0		/* no leaf-initiated join */
+#define ATM_LIJ		1		/* request joining */
+#define ATM_LIJ_RPJ	2		/* set to root-prompted join */
+#define ATM_LIJ_NJ	3		/* set to network join */
+
+
+struct sockaddr_atmsvc {
+    unsigned short 	sas_family;	/* address family, AF_ATMSVC */
+    struct {				/* SVC address */
+        unsigned char	prv[ATM_ESA_LEN];/* private ATM address */
+        char		pub[ATM_E164_LEN+1]; /* public address (E.164) */
+    					/* unused addresses must be bzero'ed */
+	char		lij_type;	/* role in LIJ call; one of ATM_LIJ* */
+	__u32	lij_id;		/* LIJ call identifier */
+    } sas_addr __ATM_API_ALIGN;		/* SVC address */
+};
+
+
+static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr)
+{
+	return *addr.sas_addr.prv || *addr.sas_addr.pub;
+}
+
+
+static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr)
+{
+	return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci;
+}
+
+
+/*
+ * Some stuff for linux/sockios.h
+ */
+
+struct atmif_sioc {
+	int number;
+	int length;
+	void __user *arg;
+};
+
+
+typedef unsigned short atm_backend_t;
+#endif /* _UAPI_LINUX_ATM_H */
diff --git a/include/linux/atm_eni.h b/include/uapi/linux/atm_eni.h
similarity index 100%
rename from include/linux/atm_eni.h
rename to include/uapi/linux/atm_eni.h
diff --git a/include/linux/atm_he.h b/include/uapi/linux/atm_he.h
similarity index 100%
rename from include/linux/atm_he.h
rename to include/uapi/linux/atm_he.h
diff --git a/include/linux/atm_idt77105.h b/include/uapi/linux/atm_idt77105.h
similarity index 100%
rename from include/linux/atm_idt77105.h
rename to include/uapi/linux/atm_idt77105.h
diff --git a/include/linux/atm_nicstar.h b/include/uapi/linux/atm_nicstar.h
similarity index 100%
rename from include/linux/atm_nicstar.h
rename to include/uapi/linux/atm_nicstar.h
diff --git a/include/uapi/linux/atm_tcp.h b/include/uapi/linux/atm_tcp.h
new file mode 100644
index 0000000..914e821
--- /dev/null
+++ b/include/uapi/linux/atm_tcp.h
@@ -0,0 +1,61 @@
+/* atm_tcp.h - Driver-specific declarations of the ATMTCP driver (for use by
+	       driver-specific utilities) */
+
+/* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef _UAPILINUX_ATM_TCP_H
+#define _UAPILINUX_ATM_TCP_H
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+#include <linux/types.h>
+
+
+/*
+ * All values in struct atmtcp_hdr are in network byte order
+ */
+
+struct atmtcp_hdr {
+	__u16	vpi;
+	__u16	vci;
+	__u32	length;		/* ... of data part */
+};
+
+/*
+ * All values in struct atmtcp_command are in host byte order
+ */
+
+#define ATMTCP_HDR_MAGIC	(~0)	/* this length indicates a command */
+#define ATMTCP_CTRL_OPEN	1	/* request/reply */
+#define ATMTCP_CTRL_CLOSE	2	/* request/reply */
+
+struct atmtcp_control {
+	struct atmtcp_hdr hdr;	/* must be first */
+	int type;		/* message type; both directions */
+	atm_kptr_t vcc;		/* both directions */
+	struct sockaddr_atmpvc addr; /* suggested value from kernel */
+	struct atm_qos	qos;	/* both directions */
+	int result;		/* to kernel only */
+} __ATM_API_ALIGN;
+
+/*
+ * Field usage:
+ * Messge type	dir.	hdr.v?i	type	addr	qos	vcc	result
+ * -----------  ----	------- ----	----	---	---	------
+ * OPEN		K->D	Y	Y	Y	Y	Y	0
+ * OPEN		D->K	-	Y	Y	Y	Y	Y
+ * CLOSE	K->D	-	-	Y	-	Y	0
+ * CLOSE	D->K	-	-	-	-	Y	Y
+ */
+
+#define SIOCSIFATMTCP	_IO('a',ATMIOC_ITF)	/* set ATMTCP mode */
+#define ATMTCP_CREATE	_IO('a',ATMIOC_ITF+14)	/* create persistent ATMTCP
+						   interface */
+#define ATMTCP_REMOVE	_IO('a',ATMIOC_ITF+15)	/* destroy persistent ATMTCP
+						   interface */
+
+
+
+#endif /* _UAPILINUX_ATM_TCP_H */
diff --git a/include/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h
similarity index 100%
rename from include/linux/atm_zatm.h
rename to include/uapi/linux/atm_zatm.h
diff --git a/include/linux/atmapi.h b/include/uapi/linux/atmapi.h
similarity index 100%
rename from include/linux/atmapi.h
rename to include/uapi/linux/atmapi.h
diff --git a/include/linux/atmarp.h b/include/uapi/linux/atmarp.h
similarity index 100%
rename from include/linux/atmarp.h
rename to include/uapi/linux/atmarp.h
diff --git a/include/linux/atmbr2684.h b/include/uapi/linux/atmbr2684.h
similarity index 100%
rename from include/linux/atmbr2684.h
rename to include/uapi/linux/atmbr2684.h
diff --git a/include/linux/atmclip.h b/include/uapi/linux/atmclip.h
similarity index 100%
rename from include/linux/atmclip.h
rename to include/uapi/linux/atmclip.h
diff --git a/include/uapi/linux/atmdev.h b/include/uapi/linux/atmdev.h
new file mode 100644
index 0000000..93e0ec0
--- /dev/null
+++ b/include/uapi/linux/atmdev.h
@@ -0,0 +1,215 @@
+/* atmdev.h - ATM device driver declarations and various related items */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef _UAPILINUX_ATMDEV_H
+#define _UAPILINUX_ATMDEV_H
+
+
+#include <linux/atmapi.h>
+#include <linux/atm.h>
+#include <linux/atmioc.h>
+
+
+#define ESI_LEN		6
+
+#define ATM_OC3_PCR	(155520000/270*260/8/53)
+			/* OC3 link rate:  155520000 bps
+			   SONET overhead: /270*260 (9 section, 1 path)
+			   bits per cell:  /8/53
+			   max cell rate:  353207.547 cells/sec */
+#define ATM_25_PCR	((25600000/8-8000)/54)
+			/* 25 Mbps ATM cell rate (59111) */
+#define ATM_OC12_PCR	(622080000/1080*1040/8/53)
+			/* OC12 link rate: 622080000 bps
+			   SONET overhead: /1080*1040
+			   bits per cell:  /8/53
+			   max cell rate:  1412830.188 cells/sec */
+#define ATM_DS3_PCR	(8000*12)
+			/* DS3: 12 cells in a 125 usec time slot */
+
+
+#define __AAL_STAT_ITEMS \
+    __HANDLE_ITEM(tx);			/* TX okay */ \
+    __HANDLE_ITEM(tx_err);		/* TX errors */ \
+    __HANDLE_ITEM(rx);			/* RX okay */ \
+    __HANDLE_ITEM(rx_err);		/* RX errors */ \
+    __HANDLE_ITEM(rx_drop);		/* RX out of memory */
+
+struct atm_aal_stats {
+#define __HANDLE_ITEM(i) int i
+	__AAL_STAT_ITEMS
+#undef __HANDLE_ITEM
+};
+
+
+struct atm_dev_stats {
+	struct atm_aal_stats aal0;
+	struct atm_aal_stats aal34;
+	struct atm_aal_stats aal5;
+} __ATM_API_ALIGN;
+
+
+#define ATM_GETLINKRATE	_IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
+					/* get link rate */
+#define ATM_GETNAMES	_IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
+					/* get interface names (numbers) */
+#define ATM_GETTYPE	_IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
+					/* get interface type name */
+#define ATM_GETESI	_IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
+					/* get interface ESI */
+#define ATM_GETADDR	_IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
+					/* get itf's local ATM addr. list */
+#define ATM_RSTADDR	_IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
+					/* reset itf's ATM address list */
+#define ATM_ADDADDR	_IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
+					/* add a local ATM address */
+#define ATM_DELADDR	_IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
+					/* remove a local ATM address */
+#define ATM_GETCIRANGE	_IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
+					/* get connection identifier range */
+#define ATM_SETCIRANGE	_IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
+					/* set connection identifier range */
+#define ATM_SETESI	_IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
+					/* set interface ESI */
+#define ATM_SETESIF	_IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
+					/* force interface ESI */
+#define ATM_ADDLECSADDR	_IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
+					/* register a LECS address */
+#define ATM_DELLECSADDR	_IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
+					/* unregister a LECS address */
+#define ATM_GETLECSADDR	_IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
+					/* retrieve LECS address(es) */
+
+#define ATM_GETSTAT	_IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
+					/* get AAL layer statistics */
+#define ATM_GETSTATZ	_IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
+					/* get AAL layer statistics and zero */
+#define ATM_GETLOOP	_IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
+					/* get loopback mode */
+#define ATM_SETLOOP	_IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
+					/* set loopback mode */
+#define ATM_QUERYLOOP	_IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
+					/* query supported loopback modes */
+#define ATM_SETSC	_IOW('a',ATMIOC_SPECIAL+1,int)
+					/* enable or disable single-copy */
+#define ATM_SETBACKEND	_IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
+					/* set backend handler */
+#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
+					/* use backend to make new if */
+#define ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf)
+ 					/* add party to p2mp call */
+#ifdef CONFIG_COMPAT
+/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */
+#define COMPAT_ATM_ADDPARTY  	_IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf)
+#endif
+#define ATM_DROPPARTY 	_IOW('a', ATMIOC_SPECIAL+5,int)
+					/* drop party from p2mp call */
+
+/*
+ * These are backend handkers that can be set via the ATM_SETBACKEND call
+ * above.  In the future we may support dynamic loading of these - for now,
+ * they're just being used to share the ATMIOC_BACKEND ioctls
+ */
+#define ATM_BACKEND_RAW		0	
+#define ATM_BACKEND_PPP		1	/* PPPoATM - RFC2364 */
+#define ATM_BACKEND_BR2684	2	/* Bridged RFC1483/2684 */
+
+/* for ATM_GETTYPE */
+#define ATM_ITFTYP_LEN	8	/* maximum length of interface type name */
+
+/*
+ * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
+ */
+
+/* Point of loopback				CPU-->SAR-->PHY-->line--> ... */
+#define __ATM_LM_NONE	0	/* no loop back     ^     ^     ^      ^      */
+#define __ATM_LM_AAL	1	/* loop back PDUs --'     |     |      |      */
+#define __ATM_LM_ATM	2	/* loop back ATM cells ---'     |      |      */
+/* RESERVED		4	loop back on PHY side  ---'		      */
+#define __ATM_LM_PHY	8	/* loop back bits (digital) ----'      |      */
+#define __ATM_LM_ANALOG 16	/* loop back the analog signal --------'      */
+
+/* Direction of loopback */
+#define __ATM_LM_MKLOC(n)	((n))	    /* Local (i.e. loop TX to RX) */
+#define __ATM_LM_MKRMT(n)	((n) << 8)  /* Remote (i.e. loop RX to TX) */
+
+#define __ATM_LM_XTLOC(n)	((n) & 0xff)
+#define __ATM_LM_XTRMT(n)	(((n) >> 8) & 0xff)
+
+#define ATM_LM_NONE	0	/* no loopback */
+
+#define ATM_LM_LOC_AAL	__ATM_LM_MKLOC(__ATM_LM_AAL)
+#define ATM_LM_LOC_ATM	__ATM_LM_MKLOC(__ATM_LM_ATM)
+#define ATM_LM_LOC_PHY	__ATM_LM_MKLOC(__ATM_LM_PHY)
+#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
+
+#define ATM_LM_RMT_AAL	__ATM_LM_MKRMT(__ATM_LM_AAL)
+#define ATM_LM_RMT_ATM	__ATM_LM_MKRMT(__ATM_LM_ATM)
+#define ATM_LM_RMT_PHY	__ATM_LM_MKRMT(__ATM_LM_PHY)
+#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
+
+/*
+ * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
+ * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
+ */
+
+
+struct atm_iobuf {
+	int length;
+	void __user *buffer;
+};
+
+/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
+
+#define ATM_CI_MAX      -1              /* use maximum range of VPI/VCI */
+ 
+struct atm_cirange {
+	signed char	vpi_bits;	/* 1..8, ATM_CI_MAX (-1) for maximum */
+	signed char	vci_bits;	/* 1..16, ATM_CI_MAX (-1) for maximum */
+};
+
+/* for ATM_SETSC; actually taken from the ATM_VF number space */
+
+#define ATM_SC_RX	1024		/* enable RX single-copy */
+#define ATM_SC_TX	2048		/* enable TX single-copy */
+
+#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
+				  anyway */
+
+/* MF: change_qos (Modify) flags */
+
+#define ATM_MF_IMMED	 1	/* Block until change is effective */
+#define ATM_MF_INC_RSV	 2	/* Change reservation on increase */
+#define ATM_MF_INC_SHP	 4	/* Change shaping on increase */
+#define ATM_MF_DEC_RSV	 8	/* Change reservation on decrease */
+#define ATM_MF_DEC_SHP	16	/* Change shaping on decrease */
+#define ATM_MF_BWD	32	/* Set the backward direction parameters */
+
+#define ATM_MF_SET	(ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
+			  ATM_MF_DEC_SHP | ATM_MF_BWD)
+
+/*
+ * ATM_VS_* are used to express VC state in a human-friendly way.
+ */
+
+#define ATM_VS_IDLE	0	/* VC is not used */
+#define ATM_VS_CONNECTED 1	/* VC is connected */
+#define ATM_VS_CLOSING	2	/* VC is closing */
+#define ATM_VS_LISTEN	3	/* VC is listening for incoming setups */
+#define ATM_VS_INUSE	4	/* VC is in use (registered with atmsigd) */
+#define ATM_VS_BOUND	5	/* VC is bound */
+
+#define ATM_VS2TXT_MAP \
+    "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
+
+#define ATM_VF2TXT_MAP \
+    "ADDR",	"READY",	"PARTIAL",	"REGIS", \
+    "RELEASED", "HASQOS",	"LISTEN",	"META", \
+    "256",	"512",		"1024",		"2048", \
+    "SESSION",	"HASSAP",	"BOUND",	"CLOSE"
+
+
+
+#endif /* _UAPILINUX_ATMDEV_H */
diff --git a/include/linux/atmioc.h b/include/uapi/linux/atmioc.h
similarity index 100%
rename from include/linux/atmioc.h
rename to include/uapi/linux/atmioc.h
diff --git a/include/linux/atmlec.h b/include/uapi/linux/atmlec.h
similarity index 100%
rename from include/linux/atmlec.h
rename to include/uapi/linux/atmlec.h
diff --git a/include/linux/atmmpc.h b/include/uapi/linux/atmmpc.h
similarity index 100%
rename from include/linux/atmmpc.h
rename to include/uapi/linux/atmmpc.h
diff --git a/include/linux/atmppp.h b/include/uapi/linux/atmppp.h
similarity index 100%
rename from include/linux/atmppp.h
rename to include/uapi/linux/atmppp.h
diff --git a/include/linux/atmsap.h b/include/uapi/linux/atmsap.h
similarity index 100%
rename from include/linux/atmsap.h
rename to include/uapi/linux/atmsap.h
diff --git a/include/linux/atmsvc.h b/include/uapi/linux/atmsvc.h
similarity index 100%
rename from include/linux/atmsvc.h
rename to include/uapi/linux/atmsvc.h
diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
new file mode 100644
index 0000000..76352ac
--- /dev/null
+++ b/include/uapi/linux/audit.h
@@ -0,0 +1,404 @@
+/* audit.h -- Auditing support
+ *
+ * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Written by Rickard E. (Rik) Faith <faith@redhat.com>
+ *
+ */
+
+#ifndef _UAPI_LINUX_AUDIT_H_
+#define _UAPI_LINUX_AUDIT_H_
+
+#include <linux/types.h>
+#include <linux/elf-em.h>
+#include <linux/ptrace.h>
+
+/* The netlink messages for the audit system is divided into blocks:
+ * 1000 - 1099 are for commanding the audit system
+ * 1100 - 1199 user space trusted application messages
+ * 1200 - 1299 messages internal to the audit daemon
+ * 1300 - 1399 audit event messages
+ * 1400 - 1499 SE Linux use
+ * 1500 - 1599 kernel LSPP events
+ * 1600 - 1699 kernel crypto events
+ * 1700 - 1799 kernel anomaly records
+ * 1800 - 1899 kernel integrity events
+ * 1900 - 1999 future kernel use
+ * 2000 is for otherwise unclassified kernel audit messages (legacy)
+ * 2001 - 2099 unused (kernel)
+ * 2100 - 2199 user space anomaly records
+ * 2200 - 2299 user space actions taken in response to anomalies
+ * 2300 - 2399 user space generated LSPP events
+ * 2400 - 2499 user space crypto events
+ * 2500 - 2999 future user space (maybe integrity labels and related events)
+ *
+ * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are
+ * exclusively user space. 1300-2099 is kernel --> user space 
+ * communication.
+ */
+#define AUDIT_GET		1000	/* Get status */
+#define AUDIT_SET		1001	/* Set status (enable/disable/auditd) */
+#define AUDIT_LIST		1002	/* List syscall rules -- deprecated */
+#define AUDIT_ADD		1003	/* Add syscall rule -- deprecated */
+#define AUDIT_DEL		1004	/* Delete syscall rule -- deprecated */
+#define AUDIT_USER		1005	/* Message from userspace -- deprecated */
+#define AUDIT_LOGIN		1006	/* Define the login id and information */
+#define AUDIT_WATCH_INS		1007	/* Insert file/dir watch entry */
+#define AUDIT_WATCH_REM		1008	/* Remove file/dir watch entry */
+#define AUDIT_WATCH_LIST	1009	/* List all file/dir watches */
+#define AUDIT_SIGNAL_INFO	1010	/* Get info about sender of signal to auditd */
+#define AUDIT_ADD_RULE		1011	/* Add syscall filtering rule */
+#define AUDIT_DEL_RULE		1012	/* Delete syscall filtering rule */
+#define AUDIT_LIST_RULES	1013	/* List syscall filtering rules */
+#define AUDIT_TRIM		1014	/* Trim junk from watched tree */
+#define AUDIT_MAKE_EQUIV	1015	/* Append to watched tree */
+#define AUDIT_TTY_GET		1016	/* Get TTY auditing status */
+#define AUDIT_TTY_SET		1017	/* Set TTY auditing status */
+
+#define AUDIT_FIRST_USER_MSG	1100	/* Userspace messages mostly uninteresting to kernel */
+#define AUDIT_USER_AVC		1107	/* We filter this differently */
+#define AUDIT_USER_TTY		1124	/* Non-ICANON TTY input meaning */
+#define AUDIT_LAST_USER_MSG	1199
+#define AUDIT_FIRST_USER_MSG2	2100	/* More user space messages */
+#define AUDIT_LAST_USER_MSG2	2999
+ 
+#define AUDIT_DAEMON_START      1200    /* Daemon startup record */
+#define AUDIT_DAEMON_END        1201    /* Daemon normal stop record */
+#define AUDIT_DAEMON_ABORT      1202    /* Daemon error stop record */
+#define AUDIT_DAEMON_CONFIG     1203    /* Daemon config change */
+
+#define AUDIT_SYSCALL		1300	/* Syscall event */
+/* #define AUDIT_FS_WATCH	1301	 * Deprecated */
+#define AUDIT_PATH		1302	/* Filename path information */
+#define AUDIT_IPC		1303	/* IPC record */
+#define AUDIT_SOCKETCALL	1304	/* sys_socketcall arguments */
+#define AUDIT_CONFIG_CHANGE	1305	/* Audit system configuration change */
+#define AUDIT_SOCKADDR		1306	/* sockaddr copied as syscall arg */
+#define AUDIT_CWD		1307	/* Current working directory */
+#define AUDIT_EXECVE		1309	/* execve arguments */
+#define AUDIT_IPC_SET_PERM	1311	/* IPC new permissions record type */
+#define AUDIT_MQ_OPEN		1312	/* POSIX MQ open record type */
+#define AUDIT_MQ_SENDRECV	1313	/* POSIX MQ send/receive record type */
+#define AUDIT_MQ_NOTIFY		1314	/* POSIX MQ notify record type */
+#define AUDIT_MQ_GETSETATTR	1315	/* POSIX MQ get/set attribute record type */
+#define AUDIT_KERNEL_OTHER	1316	/* For use by 3rd party modules */
+#define AUDIT_FD_PAIR		1317    /* audit record for pipe/socketpair */
+#define AUDIT_OBJ_PID		1318	/* ptrace target */
+#define AUDIT_TTY		1319	/* Input on an administrative TTY */
+#define AUDIT_EOE		1320	/* End of multi-record event */
+#define AUDIT_BPRM_FCAPS	1321	/* Information about fcaps increasing perms */
+#define AUDIT_CAPSET		1322	/* Record showing argument to sys_capset */
+#define AUDIT_MMAP		1323	/* Record showing descriptor and flags in mmap */
+#define AUDIT_NETFILTER_PKT	1324	/* Packets traversing netfilter chains */
+#define AUDIT_NETFILTER_CFG	1325	/* Netfilter chain modifications */
+
+#define AUDIT_AVC		1400	/* SE Linux avc denial or grant */
+#define AUDIT_SELINUX_ERR	1401	/* Internal SE Linux Errors */
+#define AUDIT_AVC_PATH		1402	/* dentry, vfsmount pair from avc */
+#define AUDIT_MAC_POLICY_LOAD	1403	/* Policy file load */
+#define AUDIT_MAC_STATUS	1404	/* Changed enforcing,permissive,off */
+#define AUDIT_MAC_CONFIG_CHANGE	1405	/* Changes to booleans */
+#define AUDIT_MAC_UNLBL_ALLOW	1406	/* NetLabel: allow unlabeled traffic */
+#define AUDIT_MAC_CIPSOV4_ADD	1407	/* NetLabel: add CIPSOv4 DOI entry */
+#define AUDIT_MAC_CIPSOV4_DEL	1408	/* NetLabel: del CIPSOv4 DOI entry */
+#define AUDIT_MAC_MAP_ADD	1409	/* NetLabel: add LSM domain mapping */
+#define AUDIT_MAC_MAP_DEL	1410	/* NetLabel: del LSM domain mapping */
+#define AUDIT_MAC_IPSEC_ADDSA	1411	/* Not used */
+#define AUDIT_MAC_IPSEC_DELSA	1412	/* Not used  */
+#define AUDIT_MAC_IPSEC_ADDSPD	1413	/* Not used */
+#define AUDIT_MAC_IPSEC_DELSPD	1414	/* Not used */
+#define AUDIT_MAC_IPSEC_EVENT	1415	/* Audit an IPSec event */
+#define AUDIT_MAC_UNLBL_STCADD	1416	/* NetLabel: add a static label */
+#define AUDIT_MAC_UNLBL_STCDEL	1417	/* NetLabel: del a static label */
+
+#define AUDIT_FIRST_KERN_ANOM_MSG   1700
+#define AUDIT_LAST_KERN_ANOM_MSG    1799
+#define AUDIT_ANOM_PROMISCUOUS      1700 /* Device changed promiscuous mode */
+#define AUDIT_ANOM_ABEND            1701 /* Process ended abnormally */
+#define AUDIT_ANOM_LINK		    1702 /* Suspicious use of file links */
+#define AUDIT_INTEGRITY_DATA	    1800 /* Data integrity verification */
+#define AUDIT_INTEGRITY_METADATA    1801 /* Metadata integrity verification */
+#define AUDIT_INTEGRITY_STATUS	    1802 /* Integrity enable status */
+#define AUDIT_INTEGRITY_HASH	    1803 /* Integrity HASH type */
+#define AUDIT_INTEGRITY_PCR	    1804 /* PCR invalidation msgs */
+#define AUDIT_INTEGRITY_RULE	    1805 /* policy rule */
+
+#define AUDIT_KERNEL		2000	/* Asynchronous audit record. NOT A REQUEST. */
+
+/* Rule flags */
+#define AUDIT_FILTER_USER	0x00	/* Apply rule to user-generated messages */
+#define AUDIT_FILTER_TASK	0x01	/* Apply rule at task creation (not syscall) */
+#define AUDIT_FILTER_ENTRY	0x02	/* Apply rule at syscall entry */
+#define AUDIT_FILTER_WATCH	0x03	/* Apply rule to file system watches */
+#define AUDIT_FILTER_EXIT	0x04	/* Apply rule at syscall exit */
+#define AUDIT_FILTER_TYPE	0x05	/* Apply rule at audit_log_start */
+
+#define AUDIT_NR_FILTERS	6
+
+#define AUDIT_FILTER_PREPEND	0x10	/* Prepend to front of list */
+
+/* Rule actions */
+#define AUDIT_NEVER    0	/* Do not build context if rule matches */
+#define AUDIT_POSSIBLE 1	/* Build context if rule matches  */
+#define AUDIT_ALWAYS   2	/* Generate audit record if rule matches */
+
+/* Rule structure sizes -- if these change, different AUDIT_ADD and
+ * AUDIT_LIST commands must be implemented. */
+#define AUDIT_MAX_FIELDS   64
+#define AUDIT_MAX_KEY_LEN  256
+#define AUDIT_BITMASK_SIZE 64
+#define AUDIT_WORD(nr) ((__u32)((nr)/32))
+#define AUDIT_BIT(nr)  (1 << ((nr) - AUDIT_WORD(nr)*32))
+
+#define AUDIT_SYSCALL_CLASSES 16
+#define AUDIT_CLASS_DIR_WRITE 0
+#define AUDIT_CLASS_DIR_WRITE_32 1
+#define AUDIT_CLASS_CHATTR 2
+#define AUDIT_CLASS_CHATTR_32 3
+#define AUDIT_CLASS_READ 4
+#define AUDIT_CLASS_READ_32 5
+#define AUDIT_CLASS_WRITE 6
+#define AUDIT_CLASS_WRITE_32 7
+#define AUDIT_CLASS_SIGNAL 8
+#define AUDIT_CLASS_SIGNAL_32 9
+
+/* This bitmask is used to validate user input.  It represents all bits that
+ * are currently used in an audit field constant understood by the kernel.
+ * If you are adding a new #define AUDIT_<whatever>, please ensure that
+ * AUDIT_UNUSED_BITS is updated if need be. */
+#define AUDIT_UNUSED_BITS	0x07FFFC00
+
+/* AUDIT_FIELD_COMPARE rule list */
+#define AUDIT_COMPARE_UID_TO_OBJ_UID	1
+#define AUDIT_COMPARE_GID_TO_OBJ_GID	2
+#define AUDIT_COMPARE_EUID_TO_OBJ_UID	3
+#define AUDIT_COMPARE_EGID_TO_OBJ_GID	4
+#define AUDIT_COMPARE_AUID_TO_OBJ_UID	5
+#define AUDIT_COMPARE_SUID_TO_OBJ_UID	6
+#define AUDIT_COMPARE_SGID_TO_OBJ_GID	7
+#define AUDIT_COMPARE_FSUID_TO_OBJ_UID	8
+#define AUDIT_COMPARE_FSGID_TO_OBJ_GID	9
+
+#define AUDIT_COMPARE_UID_TO_AUID	10
+#define AUDIT_COMPARE_UID_TO_EUID	11
+#define AUDIT_COMPARE_UID_TO_FSUID	12
+#define AUDIT_COMPARE_UID_TO_SUID	13
+
+#define AUDIT_COMPARE_AUID_TO_FSUID	14
+#define AUDIT_COMPARE_AUID_TO_SUID	15
+#define AUDIT_COMPARE_AUID_TO_EUID	16
+
+#define AUDIT_COMPARE_EUID_TO_SUID	17
+#define AUDIT_COMPARE_EUID_TO_FSUID	18
+
+#define AUDIT_COMPARE_SUID_TO_FSUID	19
+
+#define AUDIT_COMPARE_GID_TO_EGID	20
+#define AUDIT_COMPARE_GID_TO_FSGID	21
+#define AUDIT_COMPARE_GID_TO_SGID	22
+
+#define AUDIT_COMPARE_EGID_TO_FSGID	23
+#define AUDIT_COMPARE_EGID_TO_SGID	24
+#define AUDIT_COMPARE_SGID_TO_FSGID	25
+
+#define AUDIT_MAX_FIELD_COMPARE		AUDIT_COMPARE_SGID_TO_FSGID
+
+/* Rule fields */
+				/* These are useful when checking the
+				 * task structure at task creation time
+				 * (AUDIT_PER_TASK).  */
+#define AUDIT_PID	0
+#define AUDIT_UID	1
+#define AUDIT_EUID	2
+#define AUDIT_SUID	3
+#define AUDIT_FSUID	4
+#define AUDIT_GID	5
+#define AUDIT_EGID	6
+#define AUDIT_SGID	7
+#define AUDIT_FSGID	8
+#define AUDIT_LOGINUID	9
+#define AUDIT_PERS	10
+#define AUDIT_ARCH	11
+#define AUDIT_MSGTYPE	12
+#define AUDIT_SUBJ_USER	13	/* security label user */
+#define AUDIT_SUBJ_ROLE	14	/* security label role */
+#define AUDIT_SUBJ_TYPE	15	/* security label type */
+#define AUDIT_SUBJ_SEN	16	/* security label sensitivity label */
+#define AUDIT_SUBJ_CLR	17	/* security label clearance label */
+#define AUDIT_PPID	18
+#define AUDIT_OBJ_USER	19
+#define AUDIT_OBJ_ROLE	20
+#define AUDIT_OBJ_TYPE	21
+#define AUDIT_OBJ_LEV_LOW	22
+#define AUDIT_OBJ_LEV_HIGH	23
+
+				/* These are ONLY useful when checking
+				 * at syscall exit time (AUDIT_AT_EXIT). */
+#define AUDIT_DEVMAJOR	100
+#define AUDIT_DEVMINOR	101
+#define AUDIT_INODE	102
+#define AUDIT_EXIT	103
+#define AUDIT_SUCCESS   104	/* exit >= 0; value ignored */
+#define AUDIT_WATCH	105
+#define AUDIT_PERM	106
+#define AUDIT_DIR	107
+#define AUDIT_FILETYPE	108
+#define AUDIT_OBJ_UID	109
+#define AUDIT_OBJ_GID	110
+#define AUDIT_FIELD_COMPARE	111
+
+#define AUDIT_ARG0      200
+#define AUDIT_ARG1      (AUDIT_ARG0+1)
+#define AUDIT_ARG2      (AUDIT_ARG0+2)
+#define AUDIT_ARG3      (AUDIT_ARG0+3)
+
+#define AUDIT_FILTERKEY	210
+
+#define AUDIT_NEGATE			0x80000000
+
+/* These are the supported operators.
+ *	4  2  1  8
+ *	=  >  <  ?
+ *	----------
+ *	0  0  0	 0	00	nonsense
+ *	0  0  0	 1	08	&  bit mask
+ *	0  0  1	 0	10	<
+ *	0  1  0	 0	20	>
+ *	0  1  1	 0	30	!=
+ *	1  0  0	 0	40	=
+ *	1  0  0	 1	48	&=  bit test
+ *	1  0  1	 0	50	<=
+ *	1  1  0	 0	60	>=
+ *	1  1  1	 1	78	all operators
+ */
+#define AUDIT_BIT_MASK			0x08000000
+#define AUDIT_LESS_THAN			0x10000000
+#define AUDIT_GREATER_THAN		0x20000000
+#define AUDIT_NOT_EQUAL			0x30000000
+#define AUDIT_EQUAL			0x40000000
+#define AUDIT_BIT_TEST			(AUDIT_BIT_MASK|AUDIT_EQUAL)
+#define AUDIT_LESS_THAN_OR_EQUAL	(AUDIT_LESS_THAN|AUDIT_EQUAL)
+#define AUDIT_GREATER_THAN_OR_EQUAL	(AUDIT_GREATER_THAN|AUDIT_EQUAL)
+#define AUDIT_OPERATORS			(AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK)
+
+enum {
+	Audit_equal,
+	Audit_not_equal,
+	Audit_bitmask,
+	Audit_bittest,
+	Audit_lt,
+	Audit_gt,
+	Audit_le,
+	Audit_ge,
+	Audit_bad
+};
+
+/* Status symbols */
+				/* Mask values */
+#define AUDIT_STATUS_ENABLED		0x0001
+#define AUDIT_STATUS_FAILURE		0x0002
+#define AUDIT_STATUS_PID		0x0004
+#define AUDIT_STATUS_RATE_LIMIT		0x0008
+#define AUDIT_STATUS_BACKLOG_LIMIT	0x0010
+				/* Failure-to-log actions */
+#define AUDIT_FAIL_SILENT	0
+#define AUDIT_FAIL_PRINTK	1
+#define AUDIT_FAIL_PANIC	2
+
+/* distinguish syscall tables */
+#define __AUDIT_ARCH_64BIT 0x80000000
+#define __AUDIT_ARCH_LE	   0x40000000
+#define AUDIT_ARCH_ALPHA	(EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_ARM		(EM_ARM|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_ARMEB	(EM_ARM)
+#define AUDIT_ARCH_CRIS		(EM_CRIS|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_FRV		(EM_FRV)
+#define AUDIT_ARCH_H8300	(EM_H8_300)
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_IA64		(EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_M32R		(EM_M32R)
+#define AUDIT_ARCH_M68K		(EM_68K)
+#define AUDIT_ARCH_MIPS		(EM_MIPS)
+#define AUDIT_ARCH_MIPSEL	(EM_MIPS|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_MIPS64	(EM_MIPS|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_MIPSEL64	(EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_OPENRISC	(EM_OPENRISC)
+#define AUDIT_ARCH_PARISC	(EM_PARISC)
+#define AUDIT_ARCH_PARISC64	(EM_PARISC|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_PPC		(EM_PPC)
+#define AUDIT_ARCH_PPC64	(EM_PPC64|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_S390		(EM_S390)
+#define AUDIT_ARCH_S390X	(EM_S390|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_SH		(EM_SH)
+#define AUDIT_ARCH_SHEL		(EM_SH|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_SH64		(EM_SH|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_SHEL64	(EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_SPARC	(EM_SPARC)
+#define AUDIT_ARCH_SPARC64	(EM_SPARCV9|__AUDIT_ARCH_64BIT)
+#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+
+#define AUDIT_PERM_EXEC		1
+#define AUDIT_PERM_WRITE	2
+#define AUDIT_PERM_READ		4
+#define AUDIT_PERM_ATTR		8
+
+struct audit_status {
+	__u32		mask;		/* Bit mask for valid entries */
+	__u32		enabled;	/* 1 = enabled, 0 = disabled */
+	__u32		failure;	/* Failure-to-log action */
+	__u32		pid;		/* pid of auditd process */
+	__u32		rate_limit;	/* messages rate limit (per second) */
+	__u32		backlog_limit;	/* waiting messages limit */
+	__u32		lost;		/* messages lost */
+	__u32		backlog;	/* messages waiting in queue */
+};
+
+struct audit_tty_status {
+	__u32		enabled; /* 1 = enabled, 0 = disabled */
+};
+
+/* audit_rule_data supports filter rules with both integer and string
+ * fields.  It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and
+ * AUDIT_LIST_RULES requests.
+ */
+struct audit_rule_data {
+	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
+	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
+	__u32		field_count;
+	__u32		mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */
+	__u32		fields[AUDIT_MAX_FIELDS];
+	__u32		values[AUDIT_MAX_FIELDS];
+	__u32		fieldflags[AUDIT_MAX_FIELDS];
+	__u32		buflen;	/* total length of string fields */
+	char		buf[0];	/* string fields buffer */
+};
+
+/* audit_rule is supported to maintain backward compatibility with
+ * userspace.  It supports integer fields only and corresponds to
+ * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests.
+ */
+struct audit_rule {		/* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */
+	__u32		flags;	/* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */
+	__u32		action;	/* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */
+	__u32		field_count;
+	__u32		mask[AUDIT_BITMASK_SIZE];
+	__u32		fields[AUDIT_MAX_FIELDS];
+	__u32		values[AUDIT_MAX_FIELDS];
+};
+
+#endif /* _UAPI_LINUX_AUDIT_H_ */
diff --git a/include/uapi/linux/auto_fs.h b/include/uapi/linux/auto_fs.h
new file mode 100644
index 0000000..77cdba9
--- /dev/null
+++ b/include/uapi/linux/auto_fs.h
@@ -0,0 +1,83 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *   
+ * linux/include/linux/auto_fs.h
+ *
+ *   Copyright 1997 Transmeta Corporation - All Rights Reserved
+ *
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+
+#ifndef _UAPI_LINUX_AUTO_FS_H
+#define _UAPI_LINUX_AUTO_FS_H
+
+#include <linux/types.h>
+#ifndef __KERNEL__
+#include <sys/ioctl.h>
+#endif /* __KERNEL__ */
+
+
+/* This file describes autofs v3 */
+#define AUTOFS_PROTO_VERSION	3
+
+/* Range of protocol versions defined */
+#define AUTOFS_MAX_PROTO_VERSION	AUTOFS_PROTO_VERSION
+#define AUTOFS_MIN_PROTO_VERSION	AUTOFS_PROTO_VERSION
+
+/*
+ * Architectures where both 32- and 64-bit binaries can be executed
+ * on 64-bit kernels need this.  This keeps the structure format
+ * uniform, and makes sure the wait_queue_token isn't too big to be
+ * passed back down to the kernel.
+ *
+ * This assumes that on these architectures:
+ * mode     32 bit    64 bit
+ * -------------------------
+ * int      32 bit    32 bit
+ * long     32 bit    64 bit
+ *
+ * If so, 32-bit user-space code should be backwards compatible.
+ */
+
+#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
+ || defined(__powerpc__) || defined(__s390__)
+typedef unsigned int autofs_wqt_t;
+#else
+typedef unsigned long autofs_wqt_t;
+#endif
+
+/* Packet types */
+#define autofs_ptype_missing	0	/* Missing entry (mount request) */
+#define autofs_ptype_expire	1	/* Expire entry (umount request) */
+
+struct autofs_packet_hdr {
+	int proto_version;		/* Protocol version */
+	int type;			/* Type of packet */
+};
+
+struct autofs_packet_missing {
+	struct autofs_packet_hdr hdr;
+        autofs_wqt_t wait_queue_token;
+	int len;
+	char name[NAME_MAX+1];
+};	
+
+/* v3 expire (via ioctl) */
+struct autofs_packet_expire {
+	struct autofs_packet_hdr hdr;
+	int len;
+	char name[NAME_MAX+1];
+};
+
+#define AUTOFS_IOC_READY      _IO(0x93,0x60)
+#define AUTOFS_IOC_FAIL       _IO(0x93,0x61)
+#define AUTOFS_IOC_CATATONIC  _IO(0x93,0x62)
+#define AUTOFS_IOC_PROTOVER   _IOR(0x93,0x63,int)
+#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t)
+#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long)
+#define AUTOFS_IOC_EXPIRE     _IOR(0x93,0x65,struct autofs_packet_expire)
+
+#endif /* _UAPI_LINUX_AUTO_FS_H */
diff --git a/include/linux/auto_fs4.h b/include/uapi/linux/auto_fs4.h
similarity index 100%
rename from include/linux/auto_fs4.h
rename to include/uapi/linux/auto_fs4.h
diff --git a/include/uapi/linux/auxvec.h b/include/uapi/linux/auxvec.h
new file mode 100644
index 0000000..61594d5
--- /dev/null
+++ b/include/uapi/linux/auxvec.h
@@ -0,0 +1,35 @@
+#ifndef _UAPI_LINUX_AUXVEC_H
+#define _UAPI_LINUX_AUXVEC_H
+
+#include <asm/auxvec.h>
+
+/* Symbolic values for the entries in the auxiliary table
+   put on the initial stack */
+#define AT_NULL   0	/* end of vector */
+#define AT_IGNORE 1	/* entry should be ignored */
+#define AT_EXECFD 2	/* file descriptor of program */
+#define AT_PHDR   3	/* program headers for program */
+#define AT_PHENT  4	/* size of program header entry */
+#define AT_PHNUM  5	/* number of program headers */
+#define AT_PAGESZ 6	/* system page size */
+#define AT_BASE   7	/* base address of interpreter */
+#define AT_FLAGS  8	/* flags */
+#define AT_ENTRY  9	/* entry point of program */
+#define AT_NOTELF 10	/* program is not ELF */
+#define AT_UID    11	/* real uid */
+#define AT_EUID   12	/* effective uid */
+#define AT_GID    13	/* real gid */
+#define AT_EGID   14	/* effective gid */
+#define AT_PLATFORM 15  /* string identifying CPU for optimizations */
+#define AT_HWCAP  16    /* arch dependent hints at CPU capabilities */
+#define AT_CLKTCK 17	/* frequency at which times() increments */
+/* AT_* values 18 through 22 are reserved */
+#define AT_SECURE 23   /* secure mode boolean */
+#define AT_BASE_PLATFORM 24	/* string identifying real platform, may
+				 * differ from AT_PLATFORM. */
+#define AT_RANDOM 25	/* address of 16 random bytes */
+
+#define AT_EXECFN  31	/* filename of program */
+
+
+#endif /* _UAPI_LINUX_AUXVEC_H */
diff --git a/include/linux/ax25.h b/include/uapi/linux/ax25.h
similarity index 100%
rename from include/linux/ax25.h
rename to include/uapi/linux/ax25.h
diff --git a/include/linux/b1lli.h b/include/uapi/linux/b1lli.h
similarity index 100%
rename from include/linux/b1lli.h
rename to include/uapi/linux/b1lli.h
diff --git a/include/linux/baycom.h b/include/uapi/linux/baycom.h
similarity index 100%
rename from include/linux/baycom.h
rename to include/uapi/linux/baycom.h
diff --git a/include/linux/bfs_fs.h b/include/uapi/linux/bfs_fs.h
similarity index 100%
rename from include/linux/bfs_fs.h
rename to include/uapi/linux/bfs_fs.h
diff --git a/include/uapi/linux/binfmts.h b/include/uapi/linux/binfmts.h
new file mode 100644
index 0000000..4eb5972
--- /dev/null
+++ b/include/uapi/linux/binfmts.h
@@ -0,0 +1,20 @@
+#ifndef _UAPI_LINUX_BINFMTS_H
+#define _UAPI_LINUX_BINFMTS_H
+
+#include <linux/capability.h>
+
+struct pt_regs;
+
+/*
+ * These are the maximum length and maximum number of strings passed to the
+ * execve() system call.  MAX_ARG_STRLEN is essentially random but serves to
+ * prevent the kernel from being unduly impacted by misaddressed pointers.
+ * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer.
+ */
+#define MAX_ARG_STRLEN (PAGE_SIZE * 32)
+#define MAX_ARG_STRINGS 0x7FFFFFFF
+
+/* sizeof(linux_binprm->buf) */
+#define BINPRM_BUF_SIZE 128
+
+#endif /* _UAPI_LINUX_BINFMTS_H */
diff --git a/include/linux/blkpg.h b/include/uapi/linux/blkpg.h
similarity index 100%
rename from include/linux/blkpg.h
rename to include/uapi/linux/blkpg.h
diff --git a/include/uapi/linux/blktrace_api.h b/include/uapi/linux/blktrace_api.h
new file mode 100644
index 0000000..c590ca6
--- /dev/null
+++ b/include/uapi/linux/blktrace_api.h
@@ -0,0 +1,142 @@
+#ifndef _UAPIBLKTRACE_H
+#define _UAPIBLKTRACE_H
+
+#include <linux/types.h>
+
+/*
+ * Trace categories
+ */
+enum blktrace_cat {
+	BLK_TC_READ	= 1 << 0,	/* reads */
+	BLK_TC_WRITE	= 1 << 1,	/* writes */
+	BLK_TC_FLUSH	= 1 << 2,	/* flush */
+	BLK_TC_SYNC	= 1 << 3,	/* sync IO */
+	BLK_TC_SYNCIO	= BLK_TC_SYNC,
+	BLK_TC_QUEUE	= 1 << 4,	/* queueing/merging */
+	BLK_TC_REQUEUE	= 1 << 5,	/* requeueing */
+	BLK_TC_ISSUE	= 1 << 6,	/* issue */
+	BLK_TC_COMPLETE	= 1 << 7,	/* completions */
+	BLK_TC_FS	= 1 << 8,	/* fs requests */
+	BLK_TC_PC	= 1 << 9,	/* pc requests */
+	BLK_TC_NOTIFY	= 1 << 10,	/* special message */
+	BLK_TC_AHEAD	= 1 << 11,	/* readahead */
+	BLK_TC_META	= 1 << 12,	/* metadata */
+	BLK_TC_DISCARD	= 1 << 13,	/* discard requests */
+	BLK_TC_DRV_DATA	= 1 << 14,	/* binary per-driver data */
+	BLK_TC_FUA	= 1 << 15,	/* fua requests */
+
+	BLK_TC_END	= 1 << 15,	/* we've run out of bits! */
+};
+
+#define BLK_TC_SHIFT		(16)
+#define BLK_TC_ACT(act)		((act) << BLK_TC_SHIFT)
+
+/*
+ * Basic trace actions
+ */
+enum blktrace_act {
+	__BLK_TA_QUEUE = 1,		/* queued */
+	__BLK_TA_BACKMERGE,		/* back merged to existing rq */
+	__BLK_TA_FRONTMERGE,		/* front merge to existing rq */
+	__BLK_TA_GETRQ,			/* allocated new request */
+	__BLK_TA_SLEEPRQ,		/* sleeping on rq allocation */
+	__BLK_TA_REQUEUE,		/* request requeued */
+	__BLK_TA_ISSUE,			/* sent to driver */
+	__BLK_TA_COMPLETE,		/* completed by driver */
+	__BLK_TA_PLUG,			/* queue was plugged */
+	__BLK_TA_UNPLUG_IO,		/* queue was unplugged by io */
+	__BLK_TA_UNPLUG_TIMER,		/* queue was unplugged by timer */
+	__BLK_TA_INSERT,		/* insert request */
+	__BLK_TA_SPLIT,			/* bio was split */
+	__BLK_TA_BOUNCE,		/* bio was bounced */
+	__BLK_TA_REMAP,			/* bio was remapped */
+	__BLK_TA_ABORT,			/* request aborted */
+	__BLK_TA_DRV_DATA,		/* driver-specific binary data */
+};
+
+/*
+ * Notify events.
+ */
+enum blktrace_notify {
+	__BLK_TN_PROCESS = 0,		/* establish pid/name mapping */
+	__BLK_TN_TIMESTAMP,		/* include system clock */
+	__BLK_TN_MESSAGE,		/* Character string message */
+};
+
+
+/*
+ * Trace actions in full. Additionally, read or write is masked
+ */
+#define BLK_TA_QUEUE		(__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_BACKMERGE	(__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_FRONTMERGE	(__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE))
+#define	BLK_TA_GETRQ		(__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE))
+#define	BLK_TA_SLEEPRQ		(__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE))
+#define	BLK_TA_REQUEUE		(__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE))
+#define BLK_TA_ISSUE		(__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE))
+#define BLK_TA_COMPLETE		(__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE))
+#define BLK_TA_PLUG		(__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_UNPLUG_IO	(__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_UNPLUG_TIMER	(__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_INSERT		(__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_SPLIT		(__BLK_TA_SPLIT)
+#define BLK_TA_BOUNCE		(__BLK_TA_BOUNCE)
+#define BLK_TA_REMAP		(__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_ABORT		(__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE))
+#define BLK_TA_DRV_DATA	(__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA))
+
+#define BLK_TN_PROCESS		(__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_TIMESTAMP	(__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_MESSAGE		(__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
+
+#define BLK_IO_TRACE_MAGIC	0x65617400
+#define BLK_IO_TRACE_VERSION	0x07
+
+/*
+ * The trace itself
+ */
+struct blk_io_trace {
+	__u32 magic;		/* MAGIC << 8 | version */
+	__u32 sequence;		/* event number */
+	__u64 time;		/* in microseconds */
+	__u64 sector;		/* disk offset */
+	__u32 bytes;		/* transfer length */
+	__u32 action;		/* what happened */
+	__u32 pid;		/* who did it */
+	__u32 device;		/* device number */
+	__u32 cpu;		/* on what cpu did it happen */
+	__u16 error;		/* completion error */
+	__u16 pdu_len;		/* length of data after this trace */
+};
+
+/*
+ * The remap event
+ */
+struct blk_io_trace_remap {
+	__be32 device_from;
+	__be32 device_to;
+	__be64 sector_from;
+};
+
+enum {
+	Blktrace_setup = 1,
+	Blktrace_running,
+	Blktrace_stopped,
+};
+
+#define BLKTRACE_BDEV_SIZE	32
+
+/*
+ * User setup structure passed with BLKTRACESTART
+ */
+struct blk_user_trace_setup {
+	char name[BLKTRACE_BDEV_SIZE];	/* output */
+	__u16 act_mask;			/* input */
+	__u32 buf_size;			/* input */
+	__u32 buf_nr;			/* input */
+	__u64 start_lba;
+	__u64 end_lba;
+	__u32 pid;
+};
+
+#endif /* _UAPIBLKTRACE_H */
diff --git a/include/linux/bpqether.h b/include/uapi/linux/bpqether.h
similarity index 100%
rename from include/linux/bpqether.h
rename to include/uapi/linux/bpqether.h
diff --git a/include/uapi/linux/bsg.h b/include/uapi/linux/bsg.h
new file mode 100644
index 0000000..7a12e1c
--- /dev/null
+++ b/include/uapi/linux/bsg.h
@@ -0,0 +1,65 @@
+#ifndef _UAPIBSG_H
+#define _UAPIBSG_H
+
+#include <linux/types.h>
+
+#define BSG_PROTOCOL_SCSI		0
+
+#define BSG_SUB_PROTOCOL_SCSI_CMD	0
+#define BSG_SUB_PROTOCOL_SCSI_TMF	1
+#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT	2
+
+/*
+ * For flags member below
+ * sg.h sg_io_hdr also has bits defined for it's flags member. However
+ * none of these bits are implemented/used by bsg. The bits below are
+ * allocated to not conflict with sg.h ones anyway.
+ */
+#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */
+
+struct sg_io_v4 {
+	__s32 guard;		/* [i] 'Q' to differentiate from v3 */
+	__u32 protocol;		/* [i] 0 -> SCSI , .... */
+	__u32 subprotocol;	/* [i] 0 -> SCSI command, 1 -> SCSI task
+				   management function, .... */
+
+	__u32 request_len;	/* [i] in bytes */
+	__u64 request;		/* [i], [*i] {SCSI: cdb} */
+	__u64 request_tag;	/* [i] {SCSI: task tag (only if flagged)} */
+	__u32 request_attr;	/* [i] {SCSI: task attribute} */
+	__u32 request_priority;	/* [i] {SCSI: task priority} */
+	__u32 request_extra;	/* [i] {spare, for padding} */
+	__u32 max_response_len;	/* [i] in bytes */
+	__u64 response;		/* [i], [*o] {SCSI: (auto)sense data} */
+
+        /* "dout_": data out (to device); "din_": data in (from device) */
+	__u32 dout_iovec_count;	/* [i] 0 -> "flat" dout transfer else
+				   dout_xfer points to array of iovec */
+	__u32 dout_xfer_len;	/* [i] bytes to be transferred to device */
+	__u32 din_iovec_count;	/* [i] 0 -> "flat" din transfer */
+	__u32 din_xfer_len;	/* [i] bytes to be transferred from device */
+	__u64 dout_xferp;	/* [i], [*i] */
+	__u64 din_xferp;	/* [i], [*o] */
+
+	__u32 timeout;		/* [i] units: millisecond */
+	__u32 flags;		/* [i] bit mask */
+	__u64 usr_ptr;		/* [i->o] unused internally */
+	__u32 spare_in;		/* [i] */
+
+	__u32 driver_status;	/* [o] 0 -> ok */
+	__u32 transport_status;	/* [o] 0 -> ok */
+	__u32 device_status;	/* [o] {SCSI: command completion status} */
+	__u32 retry_delay;	/* [o] {SCSI: status auxiliary information} */
+	__u32 info;		/* [o] additional information */
+	__u32 duration;		/* [o] time to complete, in milliseconds */
+	__u32 response_len;	/* [o] bytes of response actually written */
+	__s32 din_resid;	/* [o] din_xfer_len - actual_din_xfer_len */
+	__s32 dout_resid;	/* [o] dout_xfer_len - actual_dout_xfer_len */
+	__u64 generated_tag;	/* [o] {SCSI: transport generated task tag} */
+	__u32 spare_out;	/* [o] */
+
+	__u32 padding;
+};
+
+
+#endif /* _UAPIBSG_H */
diff --git a/include/uapi/linux/byteorder/Kbuild b/include/uapi/linux/byteorder/Kbuild
index aafaa5a..619225b 100644
--- a/include/uapi/linux/byteorder/Kbuild
+++ b/include/uapi/linux/byteorder/Kbuild
@@ -1 +1,3 @@
 # UAPI Header export list
+header-y += big_endian.h
+header-y += little_endian.h
diff --git a/include/uapi/linux/byteorder/big_endian.h b/include/uapi/linux/byteorder/big_endian.h
new file mode 100644
index 0000000..6723744
--- /dev/null
+++ b/include/uapi/linux/byteorder/big_endian.h
@@ -0,0 +1,105 @@
+#ifndef _UAPI_LINUX_BYTEORDER_BIG_ENDIAN_H
+#define _UAPI_LINUX_BYTEORDER_BIG_ENDIAN_H
+
+#ifndef __BIG_ENDIAN
+#define __BIG_ENDIAN 4321
+#endif
+#ifndef __BIG_ENDIAN_BITFIELD
+#define __BIG_ENDIAN_BITFIELD
+#endif
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#define __constant_htonl(x) ((__force __be32)(__u32)(x))
+#define __constant_ntohl(x) ((__force __u32)(__be32)(x))
+#define __constant_htons(x) ((__force __be16)(__u16)(x))
+#define __constant_ntohs(x) ((__force __u16)(__be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
+#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
+#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
+#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
+#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
+#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
+#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+	return (__force __le64)__swab64p(p);
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+	return __swab64p((__u64 *)p);
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+	return (__force __le32)__swab32p(p);
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+	return __swab32p((__u32 *)p);
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+	return (__force __le16)__swab16p(p);
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+	return __swab16p((__u16 *)p);
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+	return (__force __be64)*p;
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+	return (__force __u64)*p;
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+	return (__force __be32)*p;
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+	return (__force __u32)*p;
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+	return (__force __be16)*p;
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+	return (__force __u16)*p;
+}
+#define __cpu_to_le64s(x) __swab64s((x))
+#define __le64_to_cpus(x) __swab64s((x))
+#define __cpu_to_le32s(x) __swab32s((x))
+#define __le32_to_cpus(x) __swab32s((x))
+#define __cpu_to_le16s(x) __swab16s((x))
+#define __le16_to_cpus(x) __swab16s((x))
+#define __cpu_to_be64s(x) do { (void)(x); } while (0)
+#define __be64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be32s(x) do { (void)(x); } while (0)
+#define __be32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be16s(x) do { (void)(x); } while (0)
+#define __be16_to_cpus(x) do { (void)(x); } while (0)
+
+
+#endif /* _UAPI_LINUX_BYTEORDER_BIG_ENDIAN_H */
diff --git a/include/uapi/linux/byteorder/little_endian.h b/include/uapi/linux/byteorder/little_endian.h
new file mode 100644
index 0000000..d876736
--- /dev/null
+++ b/include/uapi/linux/byteorder/little_endian.h
@@ -0,0 +1,105 @@
+#ifndef _UAPI_LINUX_BYTEORDER_LITTLE_ENDIAN_H
+#define _UAPI_LINUX_BYTEORDER_LITTLE_ENDIAN_H
+
+#ifndef __LITTLE_ENDIAN
+#define __LITTLE_ENDIAN 1234
+#endif
+#ifndef __LITTLE_ENDIAN_BITFIELD
+#define __LITTLE_ENDIAN_BITFIELD
+#endif
+
+#include <linux/types.h>
+#include <linux/swab.h>
+
+#define __constant_htonl(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x))
+#define __constant_htons(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x)))
+#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)__swab64((x)))
+#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)__swab32((x)))
+#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
+#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+	return (__force __le64)*p;
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+	return (__force __u64)*p;
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+	return (__force __le32)*p;
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+	return (__force __u32)*p;
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+	return (__force __le16)*p;
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+	return (__force __u16)*p;
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+	return (__force __be64)__swab64p(p);
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+	return __swab64p((__u64 *)p);
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+	return (__force __be32)__swab32p(p);
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+	return __swab32p((__u32 *)p);
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+	return (__force __be16)__swab16p(p);
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+	return __swab16p((__u16 *)p);
+}
+#define __cpu_to_le64s(x) do { (void)(x); } while (0)
+#define __le64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le32s(x) do { (void)(x); } while (0)
+#define __le32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le16s(x) do { (void)(x); } while (0)
+#define __le16_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be64s(x) __swab64s((x))
+#define __be64_to_cpus(x) __swab64s((x))
+#define __cpu_to_be32s(x) __swab32s((x))
+#define __be32_to_cpus(x) __swab32s((x))
+#define __cpu_to_be16s(x) __swab16s((x))
+#define __be16_to_cpus(x) __swab16s((x))
+
+
+#endif /* _UAPI_LINUX_BYTEORDER_LITTLE_ENDIAN_H */
diff --git a/include/linux/can.h b/include/uapi/linux/can.h
similarity index 100%
rename from include/linux/can.h
rename to include/uapi/linux/can.h
diff --git a/include/uapi/linux/can/Kbuild b/include/uapi/linux/can/Kbuild
index aafaa5a..21c91bf 100644
--- a/include/uapi/linux/can/Kbuild
+++ b/include/uapi/linux/can/Kbuild
@@ -1 +1,6 @@
 # UAPI Header export list
+header-y += bcm.h
+header-y += error.h
+header-y += gw.h
+header-y += netlink.h
+header-y += raw.h
diff --git a/include/linux/can/bcm.h b/include/uapi/linux/can/bcm.h
similarity index 100%
rename from include/linux/can/bcm.h
rename to include/uapi/linux/can/bcm.h
diff --git a/include/linux/can/error.h b/include/uapi/linux/can/error.h
similarity index 100%
rename from include/linux/can/error.h
rename to include/uapi/linux/can/error.h
diff --git a/include/linux/can/gw.h b/include/uapi/linux/can/gw.h
similarity index 100%
rename from include/linux/can/gw.h
rename to include/uapi/linux/can/gw.h
diff --git a/include/linux/can/netlink.h b/include/uapi/linux/can/netlink.h
similarity index 100%
rename from include/linux/can/netlink.h
rename to include/uapi/linux/can/netlink.h
diff --git a/include/linux/can/raw.h b/include/uapi/linux/can/raw.h
similarity index 100%
rename from include/linux/can/raw.h
rename to include/uapi/linux/can/raw.h
diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h
new file mode 100644
index 0000000..ba478fa
--- /dev/null
+++ b/include/uapi/linux/capability.h
@@ -0,0 +1,358 @@
+/*
+ * This is <linux/capability.h>
+ *
+ * Andrew G. Morgan <morgan@kernel.org>
+ * Alexander Kjeldaas <astor@guardian.no>
+ * with help from Aleph1, Roland Buresund and Andrew Main.
+ *
+ * See here for the libcap library ("POSIX draft" compliance):
+ *
+ * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/
+ */
+
+#ifndef _UAPI_LINUX_CAPABILITY_H
+#define _UAPI_LINUX_CAPABILITY_H
+
+#include <linux/types.h>
+
+struct task_struct;
+
+/* User-level do most of the mapping between kernel and user
+   capabilities based on the version tag given by the kernel. The
+   kernel might be somewhat backwards compatible, but don't bet on
+   it. */
+
+/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to
+   a set of three capability sets.  The transposition of 3*the
+   following structure to such a composite is better handled in a user
+   library since the draft standard requires the use of malloc/free
+   etc.. */
+
+#define _LINUX_CAPABILITY_VERSION_1  0x19980330
+#define _LINUX_CAPABILITY_U32S_1     1
+
+#define _LINUX_CAPABILITY_VERSION_2  0x20071026  /* deprecated - use v3 */
+#define _LINUX_CAPABILITY_U32S_2     2
+
+#define _LINUX_CAPABILITY_VERSION_3  0x20080522
+#define _LINUX_CAPABILITY_U32S_3     2
+
+typedef struct __user_cap_header_struct {
+	__u32 version;
+	int pid;
+} __user *cap_user_header_t;
+
+typedef struct __user_cap_data_struct {
+        __u32 effective;
+        __u32 permitted;
+        __u32 inheritable;
+} __user *cap_user_data_t;
+
+
+#define VFS_CAP_REVISION_MASK	0xFF000000
+#define VFS_CAP_REVISION_SHIFT	24
+#define VFS_CAP_FLAGS_MASK	~VFS_CAP_REVISION_MASK
+#define VFS_CAP_FLAGS_EFFECTIVE	0x000001
+
+#define VFS_CAP_REVISION_1	0x01000000
+#define VFS_CAP_U32_1           1
+#define XATTR_CAPS_SZ_1         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1))
+
+#define VFS_CAP_REVISION_2	0x02000000
+#define VFS_CAP_U32_2           2
+#define XATTR_CAPS_SZ_2         (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2))
+
+#define XATTR_CAPS_SZ           XATTR_CAPS_SZ_2
+#define VFS_CAP_U32             VFS_CAP_U32_2
+#define VFS_CAP_REVISION	VFS_CAP_REVISION_2
+
+struct vfs_cap_data {
+	__le32 magic_etc;            /* Little endian */
+	struct {
+		__le32 permitted;    /* Little endian */
+		__le32 inheritable;  /* Little endian */
+	} data[VFS_CAP_U32];
+};
+
+#ifndef __KERNEL__
+
+/*
+ * Backwardly compatible definition for source code - trapped in a
+ * 32-bit world. If you find you need this, please consider using
+ * libcap to untrap yourself...
+ */
+#define _LINUX_CAPABILITY_VERSION  _LINUX_CAPABILITY_VERSION_1
+#define _LINUX_CAPABILITY_U32S     _LINUX_CAPABILITY_U32S_1
+
+#endif
+
+
+/**
+ ** POSIX-draft defined capabilities.
+ **/
+
+/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this
+   overrides the restriction of changing file ownership and group
+   ownership. */
+
+#define CAP_CHOWN            0
+
+/* Override all DAC access, including ACL execute access if
+   [_POSIX_ACL] is defined. Excluding DAC access covered by
+   CAP_LINUX_IMMUTABLE. */
+
+#define CAP_DAC_OVERRIDE     1
+
+/* Overrides all DAC restrictions regarding read and search on files
+   and directories, including ACL restrictions if [_POSIX_ACL] is
+   defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
+
+#define CAP_DAC_READ_SEARCH  2
+
+/* Overrides all restrictions about allowed operations on files, where
+   file owner ID must be equal to the user ID, except where CAP_FSETID
+   is applicable. It doesn't override MAC and DAC restrictions. */
+
+#define CAP_FOWNER           3
+
+/* Overrides the following restrictions that the effective user ID
+   shall match the file owner ID when setting the S_ISUID and S_ISGID
+   bits on that file; that the effective group ID (or one of the
+   supplementary group IDs) shall match the file owner ID when setting
+   the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
+   cleared on successful return from chown(2) (not implemented). */
+
+#define CAP_FSETID           4
+
+/* Overrides the restriction that the real or effective user ID of a
+   process sending a signal must match the real or effective user ID
+   of the process receiving the signal. */
+
+#define CAP_KILL             5
+
+/* Allows setgid(2) manipulation */
+/* Allows setgroups(2) */
+/* Allows forged gids on socket credentials passing. */
+
+#define CAP_SETGID           6
+
+/* Allows set*uid(2) manipulation (including fsuid). */
+/* Allows forged pids on socket credentials passing. */
+
+#define CAP_SETUID           7
+
+
+/**
+ ** Linux-specific capabilities
+ **/
+
+/* Without VFS support for capabilities:
+ *   Transfer any capability in your permitted set to any pid,
+ *   remove any capability in your permitted set from any pid
+ * With VFS support for capabilities (neither of above, but)
+ *   Add any capability from current's capability bounding set
+ *       to the current process' inheritable set
+ *   Allow taking bits out of capability bounding set
+ *   Allow modification of the securebits for a process
+ */
+
+#define CAP_SETPCAP          8
+
+/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
+
+#define CAP_LINUX_IMMUTABLE  9
+
+/* Allows binding to TCP/UDP sockets below 1024 */
+/* Allows binding to ATM VCIs below 32 */
+
+#define CAP_NET_BIND_SERVICE 10
+
+/* Allow broadcasting, listen to multicast */
+
+#define CAP_NET_BROADCAST    11
+
+/* Allow interface configuration */
+/* Allow administration of IP firewall, masquerading and accounting */
+/* Allow setting debug option on sockets */
+/* Allow modification of routing tables */
+/* Allow setting arbitrary process / process group ownership on
+   sockets */
+/* Allow binding to any address for transparent proxying (also via NET_RAW) */
+/* Allow setting TOS (type of service) */
+/* Allow setting promiscuous mode */
+/* Allow clearing driver statistics */
+/* Allow multicasting */
+/* Allow read/write of device-specific registers */
+/* Allow activation of ATM control sockets */
+
+#define CAP_NET_ADMIN        12
+
+/* Allow use of RAW sockets */
+/* Allow use of PACKET sockets */
+/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */
+
+#define CAP_NET_RAW          13
+
+/* Allow locking of shared memory segments */
+/* Allow mlock and mlockall (which doesn't really have anything to do
+   with IPC) */
+
+#define CAP_IPC_LOCK         14
+
+/* Override IPC ownership checks */
+
+#define CAP_IPC_OWNER        15
+
+/* Insert and remove kernel modules - modify kernel without limit */
+#define CAP_SYS_MODULE       16
+
+/* Allow ioperm/iopl access */
+/* Allow sending USB messages to any device via /proc/bus/usb */
+
+#define CAP_SYS_RAWIO        17
+
+/* Allow use of chroot() */
+
+#define CAP_SYS_CHROOT       18
+
+/* Allow ptrace() of any process */
+
+#define CAP_SYS_PTRACE       19
+
+/* Allow configuration of process accounting */
+
+#define CAP_SYS_PACCT        20
+
+/* Allow configuration of the secure attention key */
+/* Allow administration of the random device */
+/* Allow examination and configuration of disk quotas */
+/* Allow setting the domainname */
+/* Allow setting the hostname */
+/* Allow calling bdflush() */
+/* Allow mount() and umount(), setting up new smb connection */
+/* Allow some autofs root ioctls */
+/* Allow nfsservctl */
+/* Allow VM86_REQUEST_IRQ */
+/* Allow to read/write pci config on alpha */
+/* Allow irix_prctl on mips (setstacksize) */
+/* Allow flushing all cache on m68k (sys_cacheflush) */
+/* Allow removing semaphores */
+/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
+   and shared memory */
+/* Allow locking/unlocking of shared memory segment */
+/* Allow turning swap on/off */
+/* Allow forged pids on socket credentials passing */
+/* Allow setting readahead and flushing buffers on block devices */
+/* Allow setting geometry in floppy driver */
+/* Allow turning DMA on/off in xd driver */
+/* Allow administration of md devices (mostly the above, but some
+   extra ioctls) */
+/* Allow tuning the ide driver */
+/* Allow access to the nvram device */
+/* Allow administration of apm_bios, serial and bttv (TV) device */
+/* Allow manufacturer commands in isdn CAPI support driver */
+/* Allow reading non-standardized portions of pci configuration space */
+/* Allow DDI debug ioctl on sbpcd driver */
+/* Allow setting up serial ports */
+/* Allow sending raw qic-117 commands */
+/* Allow enabling/disabling tagged queuing on SCSI controllers and sending
+   arbitrary SCSI commands */
+/* Allow setting encryption key on loopback filesystem */
+/* Allow setting zone reclaim policy */
+
+#define CAP_SYS_ADMIN        21
+
+/* Allow use of reboot() */
+
+#define CAP_SYS_BOOT         22
+
+/* Allow raising priority and setting priority on other (different
+   UID) processes */
+/* Allow use of FIFO and round-robin (realtime) scheduling on own
+   processes and setting the scheduling algorithm used by another
+   process. */
+/* Allow setting cpu affinity on other processes */
+
+#define CAP_SYS_NICE         23
+
+/* Override resource limits. Set resource limits. */
+/* Override quota limits. */
+/* Override reserved space on ext2 filesystem */
+/* Modify data journaling mode on ext3 filesystem (uses journaling
+   resources) */
+/* NOTE: ext2 honors fsuid when checking for resource overrides, so
+   you can override using fsuid too */
+/* Override size restrictions on IPC message queues */
+/* Allow more than 64hz interrupts from the real-time clock */
+/* Override max number of consoles on console allocation */
+/* Override max number of keymaps */
+
+#define CAP_SYS_RESOURCE     24
+
+/* Allow manipulation of system clock */
+/* Allow irix_stime on mips */
+/* Allow setting the real-time clock */
+
+#define CAP_SYS_TIME         25
+
+/* Allow configuration of tty devices */
+/* Allow vhangup() of tty */
+
+#define CAP_SYS_TTY_CONFIG   26
+
+/* Allow the privileged aspects of mknod() */
+
+#define CAP_MKNOD            27
+
+/* Allow taking of leases on files */
+
+#define CAP_LEASE            28
+
+#define CAP_AUDIT_WRITE      29
+
+#define CAP_AUDIT_CONTROL    30
+
+#define CAP_SETFCAP	     31
+
+/* Override MAC access.
+   The base kernel enforces no MAC policy.
+   An LSM may enforce a MAC policy, and if it does and it chooses
+   to implement capability based overrides of that policy, this is
+   the capability it should use to do so. */
+
+#define CAP_MAC_OVERRIDE     32
+
+/* Allow MAC configuration or state changes.
+   The base kernel requires no MAC configuration.
+   An LSM may enforce a MAC policy, and if it does and it chooses
+   to implement capability based checks on modifications to that
+   policy or the data required to maintain it, this is the
+   capability it should use to do so. */
+
+#define CAP_MAC_ADMIN        33
+
+/* Allow configuring the kernel's syslog (printk behaviour) */
+
+#define CAP_SYSLOG           34
+
+/* Allow triggering something that will wake the system */
+
+#define CAP_WAKE_ALARM            35
+
+/* Allow preventing system suspends */
+
+#define CAP_BLOCK_SUSPEND    36
+
+#define CAP_LAST_CAP         CAP_BLOCK_SUSPEND
+
+#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
+
+/*
+ * Bit location of each capability (used by user-space library and kernel)
+ */
+
+#define CAP_TO_INDEX(x)     ((x) >> 5)        /* 1 << 5 == bits in __u32 */
+#define CAP_TO_MASK(x)      (1 << ((x) & 31)) /* mask for indexed __u32 */
+
+
+#endif /* _UAPI_LINUX_CAPABILITY_H */
diff --git a/include/linux/capi.h b/include/uapi/linux/capi.h
similarity index 100%
rename from include/linux/capi.h
rename to include/uapi/linux/capi.h
diff --git a/include/linux/cciss_defs.h b/include/uapi/linux/cciss_defs.h
similarity index 100%
rename from include/linux/cciss_defs.h
rename to include/uapi/linux/cciss_defs.h
diff --git a/include/uapi/linux/cciss_ioctl.h b/include/uapi/linux/cciss_ioctl.h
new file mode 100644
index 0000000..bb0b9dd
--- /dev/null
+++ b/include/uapi/linux/cciss_ioctl.h
@@ -0,0 +1,88 @@
+#ifndef _UAPICCISS_IOCTLH
+#define _UAPICCISS_IOCTLH
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/cciss_defs.h>
+
+#define CCISS_IOC_MAGIC 'B'
+
+
+typedef struct _cciss_pci_info_struct
+{
+	unsigned char 	bus;
+	unsigned char 	dev_fn;
+	unsigned short	domain;
+	__u32 		board_id;
+} cciss_pci_info_struct; 
+
+typedef struct _cciss_coalint_struct
+{
+	__u32  delay;
+	__u32  count;
+} cciss_coalint_struct;
+
+typedef char NodeName_type[16];
+
+typedef __u32 Heartbeat_type;
+
+#define CISS_PARSCSIU2 	0x0001
+#define CISS_PARCSCIU3 	0x0002
+#define CISS_FIBRE1G	0x0100
+#define CISS_FIBRE2G	0x0200
+typedef __u32 BusTypes_type;
+
+typedef char FirmwareVer_type[4];
+typedef __u32 DriverVer_type;
+
+#define MAX_KMALLOC_SIZE 128000
+
+typedef struct _IOCTL_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info; 
+  WORD			   buf_size;  /* size in bytes of the buf */
+  BYTE			   __user *buf;
+} IOCTL_Command_struct;
+
+typedef struct _BIG_IOCTL_Command_struct {
+  LUNAddr_struct	   LUN_info;
+  RequestBlock_struct      Request;
+  ErrorInfo_struct  	   error_info;
+  DWORD			   malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
+  DWORD			   buf_size;    /* size in bytes of the buf */
+  				        /* < malloc_size * MAXSGENTRIES */
+  BYTE			   __user *buf;
+} BIG_IOCTL_Command_struct;
+
+typedef struct _LogvolInfo_struct{
+	__u32	LunID;
+	int	num_opens;  /* number of opens on the logical volume */
+	int	num_parts;  /* number of partitions configured on logvol */
+} LogvolInfo_struct;
+
+#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
+
+#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
+#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
+
+#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
+#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
+
+#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
+#define CCISS_GETBUSTYPES  _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
+#define CCISS_GETFIRMVER   _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
+#define CCISS_GETDRIVVER   _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
+#define CCISS_REVALIDVOLS  _IO(CCISS_IOC_MAGIC, 10)
+#define CCISS_PASSTHRU	   _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
+#define CCISS_DEREGDISK	   _IO(CCISS_IOC_MAGIC, 12)
+
+/* no longer used... use REGNEWD instead */ 
+#define CCISS_REGNEWDISK  _IOW(CCISS_IOC_MAGIC, 13, int)
+
+#define CCISS_REGNEWD	   _IO(CCISS_IOC_MAGIC, 14)
+#define CCISS_RESCANDISK   _IO(CCISS_IOC_MAGIC, 16)
+#define CCISS_GETLUNINFO   _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
+#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
+
+#endif /* _UAPICCISS_IOCTLH */
diff --git a/include/uapi/linux/cdrom.h b/include/uapi/linux/cdrom.h
new file mode 100644
index 0000000..898b866
--- /dev/null
+++ b/include/uapi/linux/cdrom.h
@@ -0,0 +1,912 @@
+/*
+ * -- <linux/cdrom.h>
+ * General header file for linux CD-ROM drivers 
+ * Copyright (C) 1992         David Giller, rafetmad@oxy.edu
+ *               1994, 1995   Eberhard Mönkeberg, emoenke@gwdg.de
+ *               1996         David van Leeuwen, david@tm.tno.nl
+ *               1997, 1998   Erik Andersen, andersee@debian.org
+ *               1998-2002    Jens Axboe, axboe@suse.de
+ */
+ 
+#ifndef _UAPI_LINUX_CDROM_H
+#define _UAPI_LINUX_CDROM_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*******************************************************
+ * As of Linux 2.1.x, all Linux CD-ROM application programs will use this 
+ * (and only this) include file.  It is my hope to provide Linux with
+ * a uniform interface between software accessing CD-ROMs and the various 
+ * device drivers that actually talk to the drives.  There may still be
+ * 23 different kinds of strange CD-ROM drives, but at least there will 
+ * now be one, and only one, Linux CD-ROM interface.
+ *
+ * Additionally, as of Linux 2.1.x, all Linux application programs 
+ * should use the O_NONBLOCK option when opening a CD-ROM device 
+ * for subsequent ioctl commands.  This allows for neat system errors 
+ * like "No medium found" or "Wrong medium type" upon attempting to 
+ * mount or play an empty slot, mount an audio disc, or play a data disc.
+ * Generally, changing an application program to support O_NONBLOCK
+ * is as easy as the following:
+ *       -    drive = open("/dev/cdrom", O_RDONLY);
+ *       +    drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK);
+ * It is worth the small change.
+ *
+ *  Patches for many common CD programs (provided by David A. van Leeuwen)
+ *  can be found at:  ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/
+ * 
+ *******************************************************/
+
+/* When a driver supports a certain function, but the cdrom drive we are 
+ * using doesn't, we will return the error EDRIVE_CANT_DO_THIS.  We will 
+ * borrow the "Operation not supported" error from the network folks to 
+ * accomplish this.  Maybe someday we will get a more targeted error code, 
+ * but this will do for now... */
+#define EDRIVE_CANT_DO_THIS  EOPNOTSUPP
+
+/*******************************************************
+ * The CD-ROM IOCTL commands  -- these should be supported by 
+ * all the various cdrom drivers.  For the CD-ROM ioctls, we 
+ * will commandeer byte 0x53, or 'S'.
+ *******************************************************/
+#define CDROMPAUSE		0x5301 /* Pause Audio Operation */ 
+#define CDROMRESUME		0x5302 /* Resume paused Audio Operation */
+#define CDROMPLAYMSF		0x5303 /* Play Audio MSF (struct cdrom_msf) */
+#define CDROMPLAYTRKIND		0x5304 /* Play Audio Track/index 
+                                           (struct cdrom_ti) */
+#define CDROMREADTOCHDR		0x5305 /* Read TOC header 
+                                           (struct cdrom_tochdr) */
+#define CDROMREADTOCENTRY	0x5306 /* Read TOC entry 
+                                           (struct cdrom_tocentry) */
+#define CDROMSTOP		0x5307 /* Stop the cdrom drive */
+#define CDROMSTART		0x5308 /* Start the cdrom drive */
+#define CDROMEJECT		0x5309 /* Ejects the cdrom media */
+#define CDROMVOLCTRL		0x530a /* Control output volume 
+                                           (struct cdrom_volctrl) */
+#define CDROMSUBCHNL		0x530b /* Read subchannel data 
+                                           (struct cdrom_subchnl) */
+#define CDROMREADMODE2		0x530c /* Read CDROM mode 2 data (2336 Bytes) 
+                                           (struct cdrom_read) */
+#define CDROMREADMODE1		0x530d /* Read CDROM mode 1 data (2048 Bytes)
+                                           (struct cdrom_read) */
+#define CDROMREADAUDIO		0x530e /* (struct cdrom_read_audio) */
+#define CDROMEJECT_SW		0x530f /* enable(1)/disable(0) auto-ejecting */
+#define CDROMMULTISESSION	0x5310 /* Obtain the start-of-last-session 
+                                           address of multi session disks 
+                                           (struct cdrom_multisession) */
+#define CDROM_GET_MCN		0x5311 /* Obtain the "Universal Product Code" 
+                                           if available (struct cdrom_mcn) */
+#define CDROM_GET_UPC		CDROM_GET_MCN  /* This one is deprecated, 
+                                          but here anyway for compatibility */
+#define CDROMRESET		0x5312 /* hard-reset the drive */
+#define CDROMVOLREAD		0x5313 /* Get the drive's volume setting 
+                                          (struct cdrom_volctrl) */
+#define CDROMREADRAW		0x5314	/* read data in raw mode (2352 Bytes)
+                                           (struct cdrom_read) */
+/* 
+ * These ioctls are used only used in aztcd.c and optcd.c
+ */
+#define CDROMREADCOOKED		0x5315	/* read data in cooked mode */
+#define CDROMSEEK		0x5316  /* seek msf address */
+  
+/*
+ * This ioctl is only used by the scsi-cd driver.  
+   It is for playing audio in logical block addressing mode.
+ */
+#define CDROMPLAYBLK		0x5317	/* (struct cdrom_blk) */
+
+/* 
+ * These ioctls are only used in optcd.c
+ */
+#define CDROMREADALL		0x5318	/* read all 2646 bytes */
+
+/* 
+ * These ioctls are (now) only in ide-cd.c for controlling 
+ * drive spindown time.  They should be implemented in the
+ * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10,
+ * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE...
+ *  -Erik
+ */
+#define CDROMGETSPINDOWN        0x531d
+#define CDROMSETSPINDOWN        0x531e
+
+/* 
+ * These ioctls are implemented through the uniform CD-ROM driver
+ * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM
+ * drivers are eventually ported to the uniform CD-ROM driver interface.
+ */
+#define CDROMCLOSETRAY		0x5319	/* pendant of CDROMEJECT */
+#define CDROM_SET_OPTIONS	0x5320  /* Set behavior options */
+#define CDROM_CLEAR_OPTIONS	0x5321  /* Clear behavior options */
+#define CDROM_SELECT_SPEED	0x5322  /* Set the CD-ROM speed */
+#define CDROM_SELECT_DISC	0x5323  /* Select disc (for juke-boxes) */
+#define CDROM_MEDIA_CHANGED	0x5325  /* Check is media changed  */
+#define CDROM_DRIVE_STATUS	0x5326  /* Get tray position, etc. */
+#define CDROM_DISC_STATUS	0x5327  /* Get disc type, etc. */
+#define CDROM_CHANGER_NSLOTS    0x5328  /* Get number of slots */
+#define CDROM_LOCKDOOR		0x5329  /* lock or unlock door */
+#define CDROM_DEBUG		0x5330	/* Turn debug messages on/off */
+#define CDROM_GET_CAPABILITY	0x5331	/* get capabilities */
+
+/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386.
+ * Future CDROM ioctls should be kept below 0x537F
+ */
+
+/* This ioctl is only used by sbpcd at the moment */
+#define CDROMAUDIOBUFSIZ        0x5382	/* set the audio buffer size */
+					/* conflict with SCSI_IOCTL_GET_IDLUN */
+
+/* DVD-ROM Specific ioctls */
+#define DVD_READ_STRUCT		0x5390  /* Read structure */
+#define DVD_WRITE_STRUCT	0x5391  /* Write structure */
+#define DVD_AUTH		0x5392  /* Authentication */
+
+#define CDROM_SEND_PACKET	0x5393	/* send a packet to the drive */
+#define CDROM_NEXT_WRITABLE	0x5394	/* get next writable block */
+#define CDROM_LAST_WRITTEN	0x5395	/* get last block written on disc */
+
+/*******************************************************
+ * CDROM IOCTL structures
+ *******************************************************/
+
+/* Address in MSF format */
+struct cdrom_msf0		
+{
+	__u8	minute;
+	__u8	second;
+	__u8	frame;
+};
+
+/* Address in either MSF or logical format */
+union cdrom_addr		
+{
+	struct cdrom_msf0	msf;
+	int			lba;
+};
+
+/* This struct is used by the CDROMPLAYMSF ioctl */ 
+struct cdrom_msf 
+{
+	__u8	cdmsf_min0;	/* start minute */
+	__u8	cdmsf_sec0;	/* start second */
+	__u8	cdmsf_frame0;	/* start frame */
+	__u8	cdmsf_min1;	/* end minute */
+	__u8	cdmsf_sec1;	/* end second */
+	__u8	cdmsf_frame1;	/* end frame */
+};
+
+/* This struct is used by the CDROMPLAYTRKIND ioctl */
+struct cdrom_ti 
+{
+	__u8	cdti_trk0;	/* start track */
+	__u8	cdti_ind0;	/* start index */
+	__u8	cdti_trk1;	/* end track */
+	__u8	cdti_ind1;	/* end index */
+};
+
+/* This struct is used by the CDROMREADTOCHDR ioctl */
+struct cdrom_tochdr 	
+{
+	__u8	cdth_trk0;	/* start track */
+	__u8	cdth_trk1;	/* end track */
+};
+
+/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */
+struct cdrom_volctrl
+{
+	__u8	channel0;
+	__u8	channel1;
+	__u8	channel2;
+	__u8	channel3;
+};
+
+/* This struct is used by the CDROMSUBCHNL ioctl */
+struct cdrom_subchnl 
+{
+	__u8	cdsc_format;
+	__u8	cdsc_audiostatus;
+	__u8	cdsc_adr:	4;
+	__u8	cdsc_ctrl:	4;
+	__u8	cdsc_trk;
+	__u8	cdsc_ind;
+	union cdrom_addr cdsc_absaddr;
+	union cdrom_addr cdsc_reladdr;
+};
+
+
+/* This struct is used by the CDROMREADTOCENTRY ioctl */
+struct cdrom_tocentry 
+{
+	__u8	cdte_track;
+	__u8	cdte_adr	:4;
+	__u8	cdte_ctrl	:4;
+	__u8	cdte_format;
+	union cdrom_addr cdte_addr;
+	__u8	cdte_datamode;
+};
+
+/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */
+struct cdrom_read      
+{
+	int	cdread_lba;
+	char 	*cdread_bufaddr;
+	int	cdread_buflen;
+};
+
+/* This struct is used by the CDROMREADAUDIO ioctl */
+struct cdrom_read_audio
+{
+	union cdrom_addr addr; /* frame address */
+	__u8 addr_format;      /* CDROM_LBA or CDROM_MSF */
+	int nframes;           /* number of 2352-byte-frames to read at once */
+	__u8 __user *buf;      /* frame buffer (size: nframes*2352 bytes) */
+};
+
+/* This struct is used with the CDROMMULTISESSION ioctl */
+struct cdrom_multisession
+{
+	union cdrom_addr addr; /* frame address: start-of-last-session 
+	                           (not the new "frame 16"!).  Only valid
+	                           if the "xa_flag" is true. */
+	__u8 xa_flag;        /* 1: "is XA disk" */
+	__u8 addr_format;    /* CDROM_LBA or CDROM_MSF */
+};
+
+/* This struct is used with the CDROM_GET_MCN ioctl.  
+ * Very few audio discs actually have Universal Product Code information, 
+ * which should just be the Medium Catalog Number on the box.  Also note 
+ * that the way the codeis written on CD is _not_ uniform across all discs!
+ */  
+struct cdrom_mcn 
+{
+  __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */
+};
+
+/* This is used by the CDROMPLAYBLK ioctl */
+struct cdrom_blk 
+{
+	unsigned from;
+	unsigned short len;
+};
+
+#define CDROM_PACKET_SIZE	12
+
+#define CGC_DATA_UNKNOWN	0
+#define CGC_DATA_WRITE		1
+#define CGC_DATA_READ		2
+#define CGC_DATA_NONE		3
+
+/* for CDROM_PACKET_COMMAND ioctl */
+struct cdrom_generic_command
+{
+	unsigned char 		cmd[CDROM_PACKET_SIZE];
+	unsigned char		__user *buffer;
+	unsigned int 		buflen;
+	int			stat;
+	struct request_sense	__user *sense;
+	unsigned char		data_direction;
+	int			quiet;
+	int			timeout;
+	void			__user *reserved[1];	/* unused, actually */
+};
+
+/*
+ * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, 
+ * 2340, or 2352 bytes long.  
+
+*         Sector types of the standard CD-ROM data formats:
+ *
+ * format   sector type               user data size (bytes)
+ * -----------------------------------------------------------------------------
+ *   1     (Red Book)    CD-DA          2352    (CD_FRAMESIZE_RAW)
+ *   2     (Yellow Book) Mode1 Form1    2048    (CD_FRAMESIZE)
+ *   3     (Yellow Book) Mode1 Form2    2336    (CD_FRAMESIZE_RAW0)
+ *   4     (Green Book)  Mode2 Form1    2048    (CD_FRAMESIZE)
+ *   5     (Green Book)  Mode2 Form2    2328    (2324+4 spare bytes)
+ *
+ *
+ *       The layout of the standard CD-ROM data formats:
+ * -----------------------------------------------------------------------------
+ * - audio (red):                  | audio_sample_bytes |
+ *                                 |        2352        |
+ *
+ * - data (yellow, mode1):         | sync - head - data - EDC - zero - ECC |
+ *                                 |  12  -   4  - 2048 -  4  -   8  - 276 |
+ *
+ * - data (yellow, mode2):         | sync - head - data |
+ *                                 |  12  -   4  - 2336 |
+ *
+ * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC |
+ *                                 |  12  -   4  -  8  - 2048 -  4  - 276 |
+ *
+ * - XA data (green, mode2 form2): | sync - head - sub - data - Spare |
+ *                                 |  12  -   4  -  8  - 2324 -  4    |
+ *
+ */
+
+/* Some generally useful CD-ROM information -- mostly based on the above */
+#define CD_MINS              74 /* max. minutes per CD, not really a limit */
+#define CD_SECS              60 /* seconds per minute */
+#define CD_FRAMES            75 /* frames per second */
+#define CD_SYNC_SIZE         12 /* 12 sync bytes per raw data frame */
+#define CD_MSF_OFFSET       150 /* MSF numbering offset of first frame */
+#define CD_CHUNK_SIZE        24 /* lowest-level "data bytes piece" */
+#define CD_NUM_OF_CHUNKS     98 /* chunks per frame */
+#define CD_FRAMESIZE_SUB     96 /* subchannel data "frame" size */
+#define CD_HEAD_SIZE          4 /* header (address) bytes per raw data frame */
+#define CD_SUBHEAD_SIZE       8 /* subheader bytes per raw XA data frame */
+#define CD_EDC_SIZE           4 /* bytes EDC per most raw data frame types */
+#define CD_ZERO_SIZE          8 /* bytes zero per yellow book mode 1 frame */
+#define CD_ECC_SIZE         276 /* bytes ECC per most raw data frame types */
+#define CD_FRAMESIZE       2048 /* bytes per frame, "cooked" mode */
+#define CD_FRAMESIZE_RAW   2352 /* bytes per frame, "raw" mode */
+#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ 
+/* most drives don't deliver everything: */
+#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
+#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
+
+#define CD_XA_HEAD        (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */
+#define CD_XA_TAIL        (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */
+#define CD_XA_SYNC_HEAD   (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */
+
+/* CD-ROM address types (cdrom_tocentry.cdte_format) */
+#define	CDROM_LBA 0x01 /* "logical block": first frame is #0 */
+#define	CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */
+
+/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */
+#define	CDROM_DATA_TRACK	0x04
+
+/* The leadout track is always 0xAA, regardless of # of tracks on disc */
+#define	CDROM_LEADOUT		0xAA
+
+/* audio states (from SCSI-2, but seen with other drives, too) */
+#define	CDROM_AUDIO_INVALID	0x00	/* audio status not supported */
+#define	CDROM_AUDIO_PLAY	0x11	/* audio play operation in progress */
+#define	CDROM_AUDIO_PAUSED	0x12	/* audio play operation paused */
+#define	CDROM_AUDIO_COMPLETED	0x13	/* audio play successfully completed */
+#define	CDROM_AUDIO_ERROR	0x14	/* audio play stopped due to error */
+#define	CDROM_AUDIO_NO_STATUS	0x15	/* no current audio status to return */
+
+/* capability flags used with the uniform CD-ROM driver */ 
+#define CDC_CLOSE_TRAY		0x1     /* caddy systems _can't_ close */
+#define CDC_OPEN_TRAY		0x2     /* but _can_ eject.  */
+#define CDC_LOCK		0x4     /* disable manual eject */
+#define CDC_SELECT_SPEED 	0x8     /* programmable speed */
+#define CDC_SELECT_DISC		0x10    /* select disc from juke-box */
+#define CDC_MULTI_SESSION 	0x20    /* read sessions>1 */
+#define CDC_MCN			0x40    /* Medium Catalog Number */
+#define CDC_MEDIA_CHANGED 	0x80    /* media changed */
+#define CDC_PLAY_AUDIO		0x100   /* audio functions */
+#define CDC_RESET               0x200   /* hard reset device */
+#define CDC_DRIVE_STATUS        0x800   /* driver implements drive status */
+#define CDC_GENERIC_PACKET	0x1000	/* driver implements generic packets */
+#define CDC_CD_R		0x2000	/* drive is a CD-R */
+#define CDC_CD_RW		0x4000	/* drive is a CD-RW */
+#define CDC_DVD			0x8000	/* drive is a DVD */
+#define CDC_DVD_R		0x10000	/* drive can write DVD-R */
+#define CDC_DVD_RAM		0x20000	/* drive can write DVD-RAM */
+#define CDC_MO_DRIVE		0x40000 /* drive is an MO device */
+#define CDC_MRW			0x80000 /* drive can read MRW */
+#define CDC_MRW_W		0x100000 /* drive can write MRW */
+#define CDC_RAM			0x200000 /* ok to open for WRITE */
+
+/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */
+#define CDS_NO_INFO		0	/* if not implemented */
+#define CDS_NO_DISC		1
+#define CDS_TRAY_OPEN		2
+#define CDS_DRIVE_NOT_READY	3
+#define CDS_DISC_OK		4
+
+/* return values for the CDROM_DISC_STATUS ioctl */
+/* can also return CDS_NO_[INFO|DISC], from above */
+#define CDS_AUDIO		100
+#define CDS_DATA_1		101
+#define CDS_DATA_2		102
+#define CDS_XA_2_1		103
+#define CDS_XA_2_2		104
+#define CDS_MIXED		105
+
+/* User-configurable behavior options for the uniform CD-ROM driver */
+#define CDO_AUTO_CLOSE		0x1     /* close tray on first open() */
+#define CDO_AUTO_EJECT		0x2     /* open tray on last release() */
+#define CDO_USE_FFLAGS		0x4     /* use O_NONBLOCK information on open */
+#define CDO_LOCK		0x8     /* lock tray on open files */
+#define CDO_CHECK_TYPE		0x10    /* check type on open for data */
+
+/* Special codes used when specifying changer slots. */
+#define CDSL_NONE       	(INT_MAX-1)
+#define CDSL_CURRENT    	INT_MAX
+
+/* For partition based multisession access. IDE can handle 64 partitions
+ * per drive - SCSI CD-ROM's use minors to differentiate between the
+ * various drives, so we can't do multisessions the same way there.
+ * Use the -o session=x option to mount on them.
+ */
+#define CD_PART_MAX		64
+#define CD_PART_MASK		(CD_PART_MAX - 1)
+
+/*********************************************************************
+ * Generic Packet commands, MMC commands, and such
+ *********************************************************************/
+
+ /* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+#define GPCMD_BLANK			    0xa1
+#define GPCMD_CLOSE_TRACK		    0x5b
+#define GPCMD_FLUSH_CACHE		    0x35
+#define GPCMD_FORMAT_UNIT		    0x04
+#define GPCMD_GET_CONFIGURATION		    0x46
+#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define GPCMD_GET_PERFORMANCE		    0xac
+#define GPCMD_INQUIRY			    0x12
+#define GPCMD_LOAD_UNLOAD		    0xa6
+#define GPCMD_MECHANISM_STATUS		    0xbd
+#define GPCMD_MODE_SELECT_10		    0x55
+#define GPCMD_MODE_SENSE_10		    0x5a
+#define GPCMD_PAUSE_RESUME		    0x4b
+#define GPCMD_PLAY_AUDIO_10		    0x45
+#define GPCMD_PLAY_AUDIO_MSF		    0x47
+#define GPCMD_PLAY_AUDIO_TI		    0x48
+#define GPCMD_PLAY_CD			    0xbc
+#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
+#define GPCMD_READ_10			    0x28
+#define GPCMD_READ_12			    0xa8
+#define GPCMD_READ_BUFFER		    0x3c
+#define GPCMD_READ_BUFFER_CAPACITY	    0x5c
+#define GPCMD_READ_CDVD_CAPACITY	    0x25
+#define GPCMD_READ_CD			    0xbe
+#define GPCMD_READ_CD_MSF		    0xb9
+#define GPCMD_READ_DISC_INFO		    0x51
+#define GPCMD_READ_DVD_STRUCTURE	    0xad
+#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
+#define GPCMD_READ_HEADER		    0x44
+#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
+#define GPCMD_READ_SUBCHANNEL		    0x42
+#define GPCMD_READ_TOC_PMA_ATIP		    0x43
+#define GPCMD_REPAIR_RZONE_TRACK	    0x58
+#define GPCMD_REPORT_KEY		    0xa4
+#define GPCMD_REQUEST_SENSE		    0x03
+#define GPCMD_RESERVE_RZONE_TRACK	    0x53
+#define GPCMD_SEND_CUE_SHEET		    0x5d
+#define GPCMD_SCAN			    0xba
+#define GPCMD_SEEK			    0x2b
+#define GPCMD_SEND_DVD_STRUCTURE	    0xbf
+#define GPCMD_SEND_EVENT		    0xa2
+#define GPCMD_SEND_KEY			    0xa3
+#define GPCMD_SEND_OPC			    0x54
+#define GPCMD_SET_READ_AHEAD		    0xa7
+#define GPCMD_SET_STREAMING		    0xb6
+#define GPCMD_START_STOP_UNIT		    0x1b
+#define GPCMD_STOP_PLAY_SCAN		    0x4e
+#define GPCMD_TEST_UNIT_READY		    0x00
+#define GPCMD_VERIFY_10			    0x2f
+#define GPCMD_WRITE_10			    0x2a
+#define GPCMD_WRITE_12			    0xaa
+#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
+#define GPCMD_WRITE_BUFFER		    0x3b
+/* This is listed as optional in ATAPI 2.6, but is (curiously) 
+ * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
+ * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
+ * drives support it. */
+#define GPCMD_SET_SPEED			    0xbb
+/* This seems to be a SCSI specific CD-ROM opcode 
+ * to play data at track/index */
+#define GPCMD_PLAYAUDIO_TI		    0x48
+/*
+ * From MS Media Status Notification Support Specification. For
+ * older drives only.
+ */
+#define GPCMD_GET_MEDIA_STATUS		    0xda
+
+/* Mode page codes for mode sense/set */
+#define GPMODE_VENDOR_PAGE		0x00
+#define GPMODE_R_W_ERROR_PAGE		0x01
+#define GPMODE_WRITE_PARMS_PAGE		0x05
+#define GPMODE_WCACHING_PAGE		0x08
+#define GPMODE_AUDIO_CTL_PAGE		0x0e
+#define GPMODE_POWER_PAGE		0x1a
+#define GPMODE_FAULT_FAIL_PAGE		0x1c
+#define GPMODE_TO_PROTECT_PAGE		0x1d
+#define GPMODE_CAPABILITIES_PAGE	0x2a
+#define GPMODE_ALL_PAGES		0x3f
+/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
+ * of MODE_SENSE_POWER_PAGE */
+#define GPMODE_CDROM_PAGE		0x0d
+
+
+
+/* DVD struct types */
+#define DVD_STRUCT_PHYSICAL	0x00
+#define DVD_STRUCT_COPYRIGHT	0x01
+#define DVD_STRUCT_DISCKEY	0x02
+#define DVD_STRUCT_BCA		0x03
+#define DVD_STRUCT_MANUFACT	0x04
+
+struct dvd_layer {
+	__u8 book_version	: 4;
+	__u8 book_type		: 4;
+	__u8 min_rate		: 4;
+	__u8 disc_size		: 4;
+	__u8 layer_type		: 4;
+	__u8 track_path		: 1;
+	__u8 nlayers		: 2;
+	__u8 track_density	: 4;
+	__u8 linear_density	: 4;
+	__u8 bca		: 1;
+	__u32 start_sector;
+	__u32 end_sector;
+	__u32 end_sector_l0;
+};
+
+#define DVD_LAYERS	4
+
+struct dvd_physical {
+	__u8 type;
+	__u8 layer_num;
+	struct dvd_layer layer[DVD_LAYERS];
+};
+
+struct dvd_copyright {
+	__u8 type;
+
+	__u8 layer_num;
+	__u8 cpst;
+	__u8 rmi;
+};
+
+struct dvd_disckey {
+	__u8 type;
+
+	unsigned agid		: 2;
+	__u8 value[2048];
+};
+
+struct dvd_bca {
+	__u8 type;
+
+	int len;
+	__u8 value[188];
+};
+
+struct dvd_manufact {
+	__u8 type;
+
+	__u8 layer_num;
+	int len;
+	__u8 value[2048];
+};
+
+typedef union {
+	__u8 type;
+
+	struct dvd_physical	physical;
+	struct dvd_copyright	copyright;
+	struct dvd_disckey	disckey;
+	struct dvd_bca		bca;
+	struct dvd_manufact	manufact;
+} dvd_struct;
+
+/*
+ * DVD authentication ioctl
+ */
+
+/* Authentication states */
+#define DVD_LU_SEND_AGID	0
+#define DVD_HOST_SEND_CHALLENGE	1
+#define DVD_LU_SEND_KEY1	2
+#define DVD_LU_SEND_CHALLENGE	3
+#define DVD_HOST_SEND_KEY2	4
+
+/* Termination states */
+#define DVD_AUTH_ESTABLISHED	5
+#define DVD_AUTH_FAILURE	6
+
+/* Other functions */
+#define DVD_LU_SEND_TITLE_KEY	7
+#define DVD_LU_SEND_ASF		8
+#define DVD_INVALIDATE_AGID	9
+#define DVD_LU_SEND_RPC_STATE	10
+#define DVD_HOST_SEND_RPC_STATE	11
+
+/* State data */
+typedef __u8 dvd_key[5];		/* 40-bit value, MSB is first elem. */
+typedef __u8 dvd_challenge[10];	/* 80-bit value, MSB is first elem. */
+
+struct dvd_lu_send_agid {
+	__u8 type;
+	unsigned agid		: 2;
+};
+
+struct dvd_host_send_challenge {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_challenge chal;
+};
+
+struct dvd_send_key {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_key key;
+};
+
+struct dvd_lu_send_challenge {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_challenge chal;
+};
+
+#define DVD_CPM_NO_COPYRIGHT	0
+#define DVD_CPM_COPYRIGHTED	1
+
+#define DVD_CP_SEC_NONE		0
+#define DVD_CP_SEC_EXIST	1
+
+#define DVD_CGMS_UNRESTRICTED	0
+#define DVD_CGMS_SINGLE		2
+#define DVD_CGMS_RESTRICTED	3
+
+struct dvd_lu_send_title_key {
+	__u8 type;
+	unsigned agid		: 2;
+
+	dvd_key title_key;
+	int lba;
+	unsigned cpm		: 1;
+	unsigned cp_sec		: 1;
+	unsigned cgms		: 2;
+};
+
+struct dvd_lu_send_asf {
+	__u8 type;
+	unsigned agid		: 2;
+
+	unsigned asf		: 1;
+};
+
+struct dvd_host_send_rpcstate {
+	__u8 type;
+	__u8 pdrc;
+};
+
+struct dvd_lu_send_rpcstate {
+	__u8 type		: 2;
+	__u8 vra		: 3;
+	__u8 ucca		: 3;
+	__u8 region_mask;
+	__u8 rpc_scheme;
+};
+
+typedef union {
+	__u8 type;
+
+	struct dvd_lu_send_agid		lsa;
+	struct dvd_host_send_challenge	hsc;
+	struct dvd_send_key		lsk;
+	struct dvd_lu_send_challenge	lsc;
+	struct dvd_send_key		hsk;
+	struct dvd_lu_send_title_key	lstk;
+	struct dvd_lu_send_asf		lsasf;
+	struct dvd_host_send_rpcstate	hrpcs;
+	struct dvd_lu_send_rpcstate	lrpcs;
+} dvd_authinfo;
+
+struct request_sense {
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 valid		: 1;
+	__u8 error_code		: 7;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 error_code		: 7;
+	__u8 valid		: 1;
+#endif
+	__u8 segment_number;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 ili		: 1;
+	__u8 reserved2		: 1;
+	__u8 sense_key		: 4;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 sense_key		: 4;
+	__u8 reserved2		: 1;
+	__u8 ili		: 1;
+	__u8 reserved1		: 2;
+#endif
+	__u8 information[4];
+	__u8 add_sense_len;
+	__u8 command_info[4];
+	__u8 asc;
+	__u8 ascq;
+	__u8 fruc;
+	__u8 sks[3];
+	__u8 asb[46];
+};
+
+/*
+ * feature profile
+ */
+#define CDF_RWRT	0x0020	/* "Random Writable" */
+#define CDF_HWDM	0x0024	/* "Hardware Defect Management" */
+#define CDF_MRW 	0x0028
+
+/*
+ * media status bits
+ */
+#define CDM_MRW_NOTMRW			0
+#define CDM_MRW_BGFORMAT_INACTIVE	1
+#define CDM_MRW_BGFORMAT_ACTIVE		2
+#define CDM_MRW_BGFORMAT_COMPLETE	3
+
+/*
+ * mrw address spaces
+ */
+#define MRW_LBA_DMA			0
+#define MRW_LBA_GAA			1
+
+/*
+ * mrw mode pages (first is deprecated) -- probed at init time and
+ * cdi->mrw_mode_page is set
+ */
+#define MRW_MODE_PC_PRE1		0x2c
+#define MRW_MODE_PC			0x03
+
+struct mrw_feature_desc {
+	__be16 feature_code;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 feature_version	: 4;
+	__u8 persistent		: 1;
+	__u8 curr		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 curr		: 1;
+	__u8 persistent		: 1;
+	__u8 feature_version	: 4;
+	__u8 reserved1		: 2;
+#endif
+	__u8 add_len;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2		: 7;
+	__u8 write		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 write		: 1;
+	__u8 reserved2		: 7;
+#endif
+	__u8 reserved3;
+	__u8 reserved4;
+	__u8 reserved5;
+};
+
+/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */
+struct rwrt_feature_desc {
+	__be16 feature_code;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1		: 2;
+	__u8 feature_version	: 4;
+	__u8 persistent		: 1;
+	__u8 curr		: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 curr		: 1;
+	__u8 persistent		: 1;
+	__u8 feature_version	: 4;
+	__u8 reserved1		: 2;
+#endif
+	__u8 add_len;
+	__u32 last_lba;
+	__u32 block_size;
+	__u16 blocking;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2		: 7;
+	__u8 page_present	: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 page_present	: 1;
+	__u8 reserved2		: 7;
+#endif
+	__u8 reserved3;
+};
+
+typedef struct {
+	__be16 disc_information_length;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved1			: 3;
+        __u8 erasable			: 1;
+        __u8 border_status		: 2;
+        __u8 disc_status		: 2;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+        __u8 disc_status		: 2;
+        __u8 border_status		: 2;
+        __u8 erasable			: 1;
+	__u8 reserved1			: 3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__u8 n_first_track;
+	__u8 n_sessions_lsb;
+	__u8 first_track_lsb;
+	__u8 last_track_lsb;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 did_v			: 1;
+        __u8 dbc_v			: 1;
+        __u8 uru			: 1;
+        __u8 reserved2			: 2;
+	__u8 dbit			: 1;
+	__u8 mrw_status			: 2;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 mrw_status			: 2;
+	__u8 dbit			: 1;
+        __u8 reserved2			: 2;
+        __u8 uru			: 1;
+        __u8 dbc_v			: 1;
+	__u8 did_v			: 1;
+#endif
+	__u8 disc_type;
+	__u8 n_sessions_msb;
+	__u8 first_track_msb;
+	__u8 last_track_msb;
+	__u32 disc_id;
+	__u32 lead_in;
+	__u32 lead_out;
+	__u8 disc_bar_code[8];
+	__u8 reserved3;
+	__u8 n_opc;
+} disc_information;
+
+typedef struct {
+	__be16 track_information_length;
+	__u8 track_lsb;
+	__u8 session_lsb;
+	__u8 reserved1;
+#if defined(__BIG_ENDIAN_BITFIELD)
+	__u8 reserved2			: 2;
+        __u8 damage			: 1;
+        __u8 copy			: 1;
+        __u8 track_mode			: 4;
+	__u8 rt				: 1;
+	__u8 blank			: 1;
+	__u8 packet			: 1;
+	__u8 fp				: 1;
+	__u8 data_mode			: 4;
+	__u8 reserved3			: 6;
+	__u8 lra_v			: 1;
+	__u8 nwa_v			: 1;
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+        __u8 track_mode			: 4;
+        __u8 copy			: 1;
+        __u8 damage			: 1;
+	__u8 reserved2			: 2;
+	__u8 data_mode			: 4;
+	__u8 fp				: 1;
+	__u8 packet			: 1;
+	__u8 blank			: 1;
+	__u8 rt				: 1;
+	__u8 nwa_v			: 1;
+	__u8 lra_v			: 1;
+	__u8 reserved3			: 6;
+#endif
+	__be32 track_start;
+	__be32 next_writable;
+	__be32 free_blocks;
+	__be32 fixed_packet_size;
+	__be32 track_size;
+	__be32 last_rec_address;
+} track_information;
+
+struct feature_header {
+	__u32 data_len;
+	__u8 reserved1;
+	__u8 reserved2;
+	__u16 curr_profile;
+};
+
+struct mode_page_header {
+	__be16 mode_data_length;
+	__u8 medium_type;
+	__u8 reserved1;
+	__u8 reserved2;
+	__u8 reserved3;
+	__be16 desc_length;
+};
+
+
+#endif /* _UAPI_LINUX_CDROM_H */
diff --git a/include/linux/cgroupstats.h b/include/uapi/linux/cgroupstats.h
similarity index 100%
rename from include/linux/cgroupstats.h
rename to include/uapi/linux/cgroupstats.h
diff --git a/include/linux/chio.h b/include/uapi/linux/chio.h
similarity index 100%
rename from include/linux/chio.h
rename to include/uapi/linux/chio.h
diff --git a/include/uapi/linux/cm4000_cs.h b/include/uapi/linux/cm4000_cs.h
new file mode 100644
index 0000000..bc51f77
--- /dev/null
+++ b/include/uapi/linux/cm4000_cs.h
@@ -0,0 +1,62 @@
+#ifndef _UAPI_CM4000_H_
+#define _UAPI_CM4000_H_
+
+#include <linux/types.h>
+
+#define	MAX_ATR			33
+
+#define	CM4000_MAX_DEV		4
+
+/* those two structures are passed via ioctl() from/to userspace.  They are
+ * used by existing userspace programs, so I kepth the awkward "bIFSD" naming
+ * not to break compilation of userspace apps. -HW */
+
+typedef struct atreq {
+	__s32 atr_len;
+	unsigned char atr[64];
+	__s32 power_act;
+	unsigned char bIFSD;
+	unsigned char bIFSC;
+} atreq_t;
+
+
+/* what is particularly stupid in the original driver is the arch-dependent
+ * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace
+ * will lay out the structure members differently than the 64bit kernel.
+ *
+ * I've changed "ptsreq.protocol" from "unsigned long" to "__u32".
+ * On 32bit this will make no difference.  With 64bit kernels, it will make
+ * 32bit apps work, too.
+ */
+
+typedef struct ptsreq {
+	__u32 protocol; /*T=0: 2^0, T=1:  2^1*/
+ 	unsigned char flags;
+ 	unsigned char pts1;
+ 	unsigned char pts2;
+	unsigned char pts3;
+} ptsreq_t;
+
+#define	CM_IOC_MAGIC		'c'
+#define	CM_IOC_MAXNR	        255
+
+#define	CM_IOCGSTATUS		_IOR (CM_IOC_MAGIC, 0, unsigned char *)
+#define	CM_IOCGATR		_IOWR(CM_IOC_MAGIC, 1, atreq_t *)
+#define	CM_IOCSPTS		_IOW (CM_IOC_MAGIC, 2, ptsreq_t *)
+#define	CM_IOCSRDR		_IO  (CM_IOC_MAGIC, 3)
+#define CM_IOCARDOFF            _IO  (CM_IOC_MAGIC, 4)
+
+#define CM_IOSDBGLVL            _IOW(CM_IOC_MAGIC, 250, int*)
+
+/* card and device states */
+#define	CM_CARD_INSERTED		0x01
+#define	CM_CARD_POWERED			0x02
+#define	CM_ATR_PRESENT			0x04
+#define	CM_ATR_VALID	 		0x08
+#define	CM_STATE_VALID			0x0f
+/* extra info only from CM4000 */
+#define	CM_NO_READER			0x10
+#define	CM_BAD_CARD			0x20
+
+
+#endif /* _UAPI_CM4000_H_ */
diff --git a/include/uapi/linux/cn_proc.h b/include/uapi/linux/cn_proc.h
new file mode 100644
index 0000000..0d7b499
--- /dev/null
+++ b/include/uapi/linux/cn_proc.h
@@ -0,0 +1,121 @@
+/*
+ * cn_proc.h - process events connector
+ *
+ * Copyright (C) Matt Helsley, IBM Corp. 2005
+ * Based on cn_fork.h by Nguyen Anh Quynh and Guillaume Thouvenin
+ * Copyright (C) 2005 Nguyen Anh Quynh <aquynh@gmail.com>
+ * Copyright (C) 2005 Guillaume Thouvenin <guillaume.thouvenin@bull.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _UAPICN_PROC_H
+#define _UAPICN_PROC_H
+
+#include <linux/types.h>
+
+/*
+ * Userspace sends this enum to register with the kernel that it is listening
+ * for events on the connector.
+ */
+enum proc_cn_mcast_op {
+	PROC_CN_MCAST_LISTEN = 1,
+	PROC_CN_MCAST_IGNORE = 2
+};
+
+/*
+ * From the user's point of view, the process
+ * ID is the thread group ID and thread ID is the internal
+ * kernel "pid". So, fields are assigned as follow:
+ *
+ *  In user space     -  In  kernel space
+ *
+ * parent process ID  =  parent->tgid
+ * parent thread  ID  =  parent->pid
+ * child  process ID  =  child->tgid
+ * child  thread  ID  =  child->pid
+ */
+
+struct proc_event {
+	enum what {
+		/* Use successive bits so the enums can be used to record
+		 * sets of events as well
+		 */
+		PROC_EVENT_NONE = 0x00000000,
+		PROC_EVENT_FORK = 0x00000001,
+		PROC_EVENT_EXEC = 0x00000002,
+		PROC_EVENT_UID  = 0x00000004,
+		PROC_EVENT_GID  = 0x00000040,
+		PROC_EVENT_SID  = 0x00000080,
+		PROC_EVENT_PTRACE = 0x00000100,
+		PROC_EVENT_COMM = 0x00000200,
+		/* "next" should be 0x00000400 */
+		/* "last" is the last process event: exit */
+		PROC_EVENT_EXIT = 0x80000000
+	} what;
+	__u32 cpu;
+	__u64 __attribute__((aligned(8))) timestamp_ns;
+		/* Number of nano seconds since system boot */
+	union { /* must be last field of proc_event struct */
+		struct {
+			__u32 err;
+		} ack;
+
+		struct fork_proc_event {
+			__kernel_pid_t parent_pid;
+			__kernel_pid_t parent_tgid;
+			__kernel_pid_t child_pid;
+			__kernel_pid_t child_tgid;
+		} fork;
+
+		struct exec_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+		} exec;
+
+		struct id_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			union {
+				__u32 ruid; /* task uid */
+				__u32 rgid; /* task gid */
+			} r;
+			union {
+				__u32 euid;
+				__u32 egid;
+			} e;
+		} id;
+
+		struct sid_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+		} sid;
+
+		struct ptrace_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			__kernel_pid_t tracer_pid;
+			__kernel_pid_t tracer_tgid;
+		} ptrace;
+
+		struct comm_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			char           comm[16];
+		} comm;
+
+		struct exit_proc_event {
+			__kernel_pid_t process_pid;
+			__kernel_pid_t process_tgid;
+			__u32 exit_code, exit_signal;
+		} exit;
+	} event_data;
+};
+
+#endif /* _UAPICN_PROC_H */
diff --git a/include/uapi/linux/coda.h b/include/uapi/linux/coda.h
new file mode 100644
index 0000000..695fade
--- /dev/null
+++ b/include/uapi/linux/coda.h
@@ -0,0 +1,741 @@
+/* 
+   You may distribute this file under either of the two licenses that
+   follow at your discretion.
+*/
+
+/* BLURB lgpl
+
+                           Coda File System
+                              Release 5
+
+          Copyright (c) 1987-1999 Carnegie Mellon University
+                  Additional copyrights listed below
+
+This code is distributed "AS IS" without warranty of any kind under
+the terms of the GNU Library General Public Licence Version 2, as
+shown in the file LICENSE, or under the license shown below. The
+technical and financial contributors to Coda are listed in the file
+CREDITS.
+
+                        Additional copyrights 
+*/
+
+/*
+
+            Coda: an Experimental Distributed File System
+                             Release 4.0
+
+          Copyright (c) 1987-1999 Carnegie Mellon University
+                         All Rights Reserved
+
+Permission  to  use, copy, modify and distribute this software and its
+documentation is hereby granted,  provided  that  both  the  copyright
+notice  and  this  permission  notice  appear  in  all  copies  of the
+software, derivative works or  modified  versions,  and  any  portions
+thereof, and that both notices appear in supporting documentation, and
+that credit is given to Carnegie Mellon University  in  all  documents
+and publicity pertaining to direct or indirect use of this code or its
+derivatives.
+
+CODA IS AN EXPERIMENTAL SOFTWARE SYSTEM AND IS  KNOWN  TO  HAVE  BUGS,
+SOME  OF  WHICH MAY HAVE SERIOUS CONSEQUENCES.  CARNEGIE MELLON ALLOWS
+FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION.   CARNEGIE  MELLON
+DISCLAIMS  ANY  LIABILITY  OF  ANY  KIND  FOR  ANY  DAMAGES WHATSOEVER
+RESULTING DIRECTLY OR INDIRECTLY FROM THE USE OF THIS SOFTWARE  OR  OF
+ANY DERIVATIVE WORK.
+
+Carnegie  Mellon  encourages  users  of  this  software  to return any
+improvements or extensions that  they  make,  and  to  grant  Carnegie
+Mellon the rights to redistribute these changes without encumbrance.
+*/
+
+/*
+ *
+ * Based on cfs.h from Mach, but revamped for increased simplicity.
+ * Linux modifications by 
+ * Peter Braam, Aug 1996
+ */
+
+#ifndef _UAPI_CODA_HEADER_
+#define _UAPI_CODA_HEADER_
+
+
+/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */
+#if defined(__NetBSD__) || \
+  ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL))
+#include <sys/types.h>
+#endif 
+
+#ifndef CODA_MAXSYMLINKS
+#define CODA_MAXSYMLINKS 10
+#endif
+
+#if defined(DJGPP) || defined(__CYGWIN32__)
+#ifdef KERNEL
+typedef unsigned long u_long;
+typedef unsigned int u_int;
+typedef unsigned short u_short;
+typedef u_long ino_t;
+typedef u_long dev_t;
+typedef void * caddr_t;
+#ifdef DOS
+typedef unsigned __int64 u_quad_t;
+#else 
+typedef unsigned long long u_quad_t;
+#endif
+
+#define inline
+
+struct timespec {
+        long       ts_sec;
+        long       ts_nsec;
+};
+#else  /* DJGPP but not KERNEL */
+#include <sys/time.h>
+typedef unsigned long long u_quad_t;
+#endif /* !KERNEL */
+#endif /* !DJGPP */
+
+
+#if defined(__linux__)
+#include <linux/time.h>
+#define cdev_t u_quad_t
+#ifndef __KERNEL__
+#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2)
+#define _UQUAD_T_ 1
+typedef unsigned long long u_quad_t;
+#endif
+#endif /* __KERNEL__ */
+#else
+#define cdev_t dev_t
+#endif
+
+#ifdef __CYGWIN32__
+struct timespec {
+        time_t  tv_sec;         /* seconds */
+        long    tv_nsec;        /* nanoseconds */
+};
+#endif
+
+#ifndef __BIT_TYPES_DEFINED__
+#define __BIT_TYPES_DEFINED__
+typedef signed char	      int8_t;
+typedef unsigned char	    u_int8_t;
+typedef short		     int16_t;
+typedef unsigned short	   u_int16_t;
+typedef int		     int32_t;
+typedef unsigned int	   u_int32_t;
+#endif
+
+
+/*
+ * Cfs constants
+ */
+#define CODA_MAXNAMLEN   255
+#define CODA_MAXPATHLEN  1024
+#define CODA_MAXSYMLINK  10
+
+/* these are Coda's version of O_RDONLY etc combinations
+ * to deal with VFS open modes
+ */
+#define	C_O_READ	0x001
+#define	C_O_WRITE       0x002
+#define C_O_TRUNC       0x010
+#define C_O_EXCL	0x100
+#define C_O_CREAT	0x200
+
+/* these are to find mode bits in Venus */ 
+#define C_M_READ  00400
+#define C_M_WRITE 00200
+
+/* for access Venus will use */
+#define C_A_C_OK    8               /* Test for writing upon create.  */
+#define C_A_R_OK    4               /* Test for read permission.  */
+#define C_A_W_OK    2               /* Test for write permission.  */
+#define C_A_X_OK    1               /* Test for execute permission.  */
+#define C_A_F_OK    0               /* Test for existence.  */
+
+
+
+#ifndef _VENUS_DIRENT_T_
+#define _VENUS_DIRENT_T_ 1
+struct venus_dirent {
+        u_int32_t d_fileno;		/* file number of entry */
+        u_int16_t d_reclen;		/* length of this record */
+        u_int8_t  d_type;			/* file type, see below */
+        u_int8_t  d_namlen;		/* length of string in d_name */
+        char	  d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */
+};
+#undef DIRSIZ
+#define DIRSIZ(dp)      ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \
+                         (((dp)->d_namlen+1 + 3) &~ 3))
+
+/*
+ * File types
+ */
+#define	CDT_UNKNOWN	 0
+#define	CDT_FIFO	 1
+#define	CDT_CHR		 2
+#define	CDT_DIR		 4
+#define	CDT_BLK		 6
+#define	CDT_REG		 8
+#define	CDT_LNK		10
+#define	CDT_SOCK	12
+#define	CDT_WHT		14
+
+/*
+ * Convert between stat structure types and directory types.
+ */
+#define	IFTOCDT(mode)	(((mode) & 0170000) >> 12)
+#define	CDTTOIF(dirtype)	((dirtype) << 12)
+
+#endif
+
+#ifndef _VUID_T_
+#define _VUID_T_
+typedef u_int32_t vuid_t;
+typedef u_int32_t vgid_t;
+#endif /*_VUID_T_ */
+
+struct CodaFid {
+	u_int32_t opaque[4];
+};
+
+#define coda_f2i(fid)\
+	(fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0)
+
+#ifndef _VENUS_VATTR_T_
+#define _VENUS_VATTR_T_
+/*
+ * Vnode types.  VNON means no type.
+ */
+enum coda_vtype	{ C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD };
+
+struct coda_vattr {
+	long     	va_type;	/* vnode type (for create) */
+	u_short		va_mode;	/* files access mode and type */
+	short		va_nlink;	/* number of references to file */
+	vuid_t		va_uid;		/* owner user id */
+	vgid_t		va_gid;		/* owner group id */
+	long		va_fileid;	/* file id */
+	u_quad_t	va_size;	/* file size in bytes */
+	long		va_blocksize;	/* blocksize preferred for i/o */
+	struct timespec	va_atime;	/* time of last access */
+	struct timespec	va_mtime;	/* time of last modification */
+	struct timespec	va_ctime;	/* time file changed */
+	u_long		va_gen;		/* generation number of file */
+	u_long		va_flags;	/* flags defined for file */
+	cdev_t	        va_rdev;	/* device special file represents */
+	u_quad_t	va_bytes;	/* bytes of disk space held by file */
+	u_quad_t	va_filerev;	/* file modification number */
+};
+
+#endif 
+
+/* structure used by CODA_STATFS for getting cache information from venus */
+struct coda_statfs {
+    int32_t f_blocks;
+    int32_t f_bfree;
+    int32_t f_bavail;
+    int32_t f_files;
+    int32_t f_ffree;
+};
+
+/*
+ * Kernel <--> Venus communications.
+ */
+
+#define CODA_ROOT	2
+#define CODA_OPEN_BY_FD	3
+#define CODA_OPEN	4
+#define CODA_CLOSE	5
+#define CODA_IOCTL	6
+#define CODA_GETATTR	7
+#define CODA_SETATTR	8
+#define CODA_ACCESS	9
+#define CODA_LOOKUP	10
+#define CODA_CREATE	11
+#define CODA_REMOVE	12
+#define CODA_LINK	13
+#define CODA_RENAME	14
+#define CODA_MKDIR	15
+#define CODA_RMDIR	16
+#define CODA_SYMLINK	18
+#define CODA_READLINK	19
+#define CODA_FSYNC	20
+#define CODA_VGET	22
+#define CODA_SIGNAL	23
+#define CODA_REPLACE	 24 /* DOWNCALL */
+#define CODA_FLUSH       25 /* DOWNCALL */
+#define CODA_PURGEUSER   26 /* DOWNCALL */
+#define CODA_ZAPFILE     27 /* DOWNCALL */
+#define CODA_ZAPDIR      28 /* DOWNCALL */
+#define CODA_PURGEFID    30 /* DOWNCALL */
+#define CODA_OPEN_BY_PATH 31
+#define CODA_RESOLVE     32
+#define CODA_REINTEGRATE 33
+#define CODA_STATFS	 34
+#define CODA_STORE	 35
+#define CODA_RELEASE	 36
+#define CODA_NCALLS 37
+
+#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID)
+
+#define VC_MAXDATASIZE	    8192
+#define VC_MAXMSGSIZE      sizeof(union inputArgs)+sizeof(union outputArgs) +\
+                            VC_MAXDATASIZE  
+
+#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t)
+
+#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */
+
+/*
+ *        Venus <-> Coda  RPC arguments
+ */
+struct coda_in_hdr {
+    u_int32_t opcode;
+    u_int32_t unique;	    /* Keep multiple outstanding msgs distinct */
+    pid_t pid;
+    pid_t pgid;
+    vuid_t uid;
+};
+
+/* Really important that opcode and unique are 1st two fields! */
+struct coda_out_hdr {
+    u_int32_t opcode;
+    u_int32_t unique;	
+    u_int32_t result;
+};
+
+/* coda_root: NO_IN */
+struct coda_root_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+};
+
+struct coda_root_in {
+    struct coda_in_hdr in;
+};
+
+/* coda_open: */
+struct coda_open_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_open_out {
+    struct coda_out_hdr oh;
+    cdev_t	dev;
+    ino_t	inode;
+};
+
+
+/* coda_store: */
+struct coda_store_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_store_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_release: */
+struct coda_release_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_release_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_close: */
+struct coda_close_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_close_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_ioctl: */
+struct coda_ioctl_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	cmd;
+    int	len;
+    int	rwflag;
+    char *data;			/* Place holder for data. */
+};
+
+struct coda_ioctl_out {
+    struct coda_out_hdr oh;
+    int	len;
+    caddr_t	data;		/* Place holder for data. */
+};
+
+
+/* coda_getattr: */
+struct coda_getattr_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_getattr_out {
+    struct coda_out_hdr oh;
+    struct coda_vattr attr;
+};
+
+
+/* coda_setattr: NO_OUT */
+struct coda_setattr_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+struct coda_setattr_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_access: NO_OUT */
+struct coda_access_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_access_out {
+    struct coda_out_hdr out;
+};
+
+
+/* lookup flags */
+#define CLU_CASE_SENSITIVE     0x01
+#define CLU_CASE_INSENSITIVE   0x02
+
+/* coda_lookup: */
+struct  coda_lookup_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int         name;		/* Place holder for data. */
+    int         flags;	
+};
+
+struct coda_lookup_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    int	vtype;
+};
+
+
+/* coda_create: */
+struct coda_create_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+    int excl;
+    int mode;
+    int 	name;		/* Place holder for data. */
+};
+
+struct coda_create_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+
+/* coda_remove: NO_OUT */
+struct coda_remove_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int name;		/* Place holder for data. */
+};
+
+struct coda_remove_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_link: NO_OUT */
+struct coda_link_in {
+    struct coda_in_hdr ih;
+    struct CodaFid sourceFid;	/* cnode to link *to* */
+    struct CodaFid destFid;	/* Directory in which to place link */
+    int tname;		/* Place holder for data. */
+};
+
+struct coda_link_out {
+    struct coda_out_hdr out;
+};
+
+
+/* coda_rename: NO_OUT */
+struct coda_rename_in {
+    struct coda_in_hdr ih;
+    struct CodaFid sourceFid;
+    int 	srcname;
+    struct CodaFid destFid;
+    int 	destname;
+};
+
+struct coda_rename_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_mkdir: */
+struct coda_mkdir_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+    int	   name;		/* Place holder for data. */
+};
+
+struct coda_mkdir_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    struct coda_vattr attr;
+};
+
+
+/* coda_rmdir: NO_OUT */
+struct coda_rmdir_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int name;		/* Place holder for data. */
+};
+
+struct coda_rmdir_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_symlink: NO_OUT */
+struct coda_symlink_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;	/* Directory to put symlink in */
+    int srcname;
+    struct coda_vattr attr;
+    int tname;
+};
+
+struct coda_symlink_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_readlink: */
+struct coda_readlink_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_readlink_out {
+    struct coda_out_hdr oh;
+    int	count;
+    caddr_t	data;		/* Place holder for data. */
+};
+
+
+/* coda_fsync: NO_OUT */
+struct coda_fsync_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_fsync_out {
+    struct coda_out_hdr out;
+};
+
+/* coda_vget: */
+struct coda_vget_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+};
+
+struct coda_vget_out {
+    struct coda_out_hdr oh;
+    struct CodaFid VFid;
+    int	vtype;
+};
+
+
+/* CODA_SIGNAL is out-of-band, doesn't need data. */
+/* CODA_INVALIDATE is a venus->kernel call */
+/* CODA_FLUSH is a venus->kernel call */
+
+/* coda_purgeuser: */
+/* CODA_PURGEUSER is a venus->kernel call */
+struct coda_purgeuser_out {
+    struct coda_out_hdr oh;
+    vuid_t uid;
+};
+
+/* coda_zapfile: */
+/* CODA_ZAPFILE is a venus->kernel call */
+struct coda_zapfile_out {  
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_zapdir: */
+/* CODA_ZAPDIR is a venus->kernel call */	
+struct coda_zapdir_out {	  
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_purgefid: */
+/* CODA_PURGEFID is a venus->kernel call */	
+struct coda_purgefid_out { 
+    struct coda_out_hdr oh;
+    struct CodaFid CodaFid;
+};
+
+/* coda_replace: */
+/* CODA_REPLACE is a venus->kernel call */	
+struct coda_replace_out { /* coda_replace is a venus->kernel call */
+    struct coda_out_hdr oh;
+    struct CodaFid NewFid;
+    struct CodaFid OldFid;
+};
+
+/* coda_open_by_fd: */
+struct coda_open_by_fd_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int        flags;
+};
+
+struct coda_open_by_fd_out {
+    struct coda_out_hdr oh;
+    int fd;
+
+#ifdef __KERNEL__
+    struct file *fh; /* not passed from userspace but used in-kernel only */
+#endif
+};
+
+/* coda_open_by_path: */
+struct coda_open_by_path_in {
+    struct coda_in_hdr ih;
+    struct CodaFid VFid;
+    int	flags;
+};
+
+struct coda_open_by_path_out {
+    struct coda_out_hdr oh;
+	int path;
+};
+
+/* coda_statfs: NO_IN */
+struct coda_statfs_in {
+    struct coda_in_hdr in;
+};
+
+struct coda_statfs_out {
+    struct coda_out_hdr oh;
+    struct coda_statfs stat;
+};
+
+/* 
+ * Occasionally, we don't cache the fid returned by CODA_LOOKUP. 
+ * For instance, if the fid is inconsistent. 
+ * This case is handled by setting the top bit of the type result parameter.
+ */
+#define CODA_NOCACHE          0x80000000
+
+union inputArgs {
+    struct coda_in_hdr ih;		/* NB: every struct below begins with an ih */
+    struct coda_open_in coda_open;
+    struct coda_store_in coda_store;
+    struct coda_release_in coda_release;
+    struct coda_close_in coda_close;
+    struct coda_ioctl_in coda_ioctl;
+    struct coda_getattr_in coda_getattr;
+    struct coda_setattr_in coda_setattr;
+    struct coda_access_in coda_access;
+    struct coda_lookup_in coda_lookup;
+    struct coda_create_in coda_create;
+    struct coda_remove_in coda_remove;
+    struct coda_link_in coda_link;
+    struct coda_rename_in coda_rename;
+    struct coda_mkdir_in coda_mkdir;
+    struct coda_rmdir_in coda_rmdir;
+    struct coda_symlink_in coda_symlink;
+    struct coda_readlink_in coda_readlink;
+    struct coda_fsync_in coda_fsync;
+    struct coda_vget_in coda_vget;
+    struct coda_open_by_fd_in coda_open_by_fd;
+    struct coda_open_by_path_in coda_open_by_path;
+    struct coda_statfs_in coda_statfs;
+};
+
+union outputArgs {
+    struct coda_out_hdr oh;		/* NB: every struct below begins with an oh */
+    struct coda_root_out coda_root;
+    struct coda_open_out coda_open;
+    struct coda_ioctl_out coda_ioctl;
+    struct coda_getattr_out coda_getattr;
+    struct coda_lookup_out coda_lookup;
+    struct coda_create_out coda_create;
+    struct coda_mkdir_out coda_mkdir;
+    struct coda_readlink_out coda_readlink;
+    struct coda_vget_out coda_vget;
+    struct coda_purgeuser_out coda_purgeuser;
+    struct coda_zapfile_out coda_zapfile;
+    struct coda_zapdir_out coda_zapdir;
+    struct coda_purgefid_out coda_purgefid;
+    struct coda_replace_out coda_replace;
+    struct coda_open_by_fd_out coda_open_by_fd;
+    struct coda_open_by_path_out coda_open_by_path;
+    struct coda_statfs_out coda_statfs;
+};    
+
+union coda_downcalls {
+    /* CODA_INVALIDATE is a venus->kernel call */
+    /* CODA_FLUSH is a venus->kernel call */
+    struct coda_purgeuser_out purgeuser;
+    struct coda_zapfile_out zapfile;
+    struct coda_zapdir_out zapdir;
+    struct coda_purgefid_out purgefid;
+    struct coda_replace_out replace;
+};
+
+
+/*
+ * Used for identifying usage of "Control" and pioctls
+ */
+
+#define PIOCPARM_MASK 0x0000ffff
+struct ViceIoctl {
+        void __user *in;        /* Data to be transferred in */
+        void __user *out;       /* Data to be transferred out */
+        u_short in_size;        /* Size of input buffer <= 2K */
+        u_short out_size;       /* Maximum size of output buffer, <= 2K */
+};
+
+struct PioctlData {
+        const char __user *path;
+        int follow;
+        struct ViceIoctl vi;
+};
+
+#define CODA_CONTROL		".CONTROL"
+#define CODA_CONTROLLEN		8
+#define CTL_INO			-1
+
+/* Data passed to mount */
+
+#define CODA_MOUNT_VERSION 1
+
+struct coda_mount_data {
+	int		version;
+	int		fd;       /* Opened device */
+};
+
+#endif /* _UAPI_CODA_HEADER_ */
diff --git a/include/uapi/linux/coda_psdev.h b/include/uapi/linux/coda_psdev.h
new file mode 100644
index 0000000..79d0598
--- /dev/null
+++ b/include/uapi/linux/coda_psdev.h
@@ -0,0 +1,27 @@
+#ifndef _UAPI__CODA_PSDEV_H
+#define _UAPI__CODA_PSDEV_H
+
+#include <linux/magic.h>
+
+#define CODA_PSDEV_MAJOR 67
+#define MAX_CODADEVS  5	   /* how many do we allow */
+
+
+/* messages between coda filesystem in kernel and Venus */
+struct upc_req {
+	struct list_head    uc_chain;
+	caddr_t	            uc_data;
+	u_short	            uc_flags;
+	u_short             uc_inSize;  /* Size is at most 5000 bytes */
+	u_short	            uc_outSize;
+	u_short	            uc_opcode;  /* copied from data to save lookup */
+	int		    uc_unique;
+	wait_queue_head_t   uc_sleep;   /* process' wait queue */
+};
+
+#define CODA_REQ_ASYNC  0x1
+#define CODA_REQ_READ   0x2
+#define CODA_REQ_WRITE  0x4
+#define CODA_REQ_ABORT  0x8
+
+#endif /* _UAPI__CODA_PSDEV_H */
diff --git a/include/linux/coff.h b/include/uapi/linux/coff.h
similarity index 100%
rename from include/linux/coff.h
rename to include/uapi/linux/coff.h
diff --git a/include/uapi/linux/connector.h b/include/uapi/linux/connector.h
new file mode 100644
index 0000000..8761a03
--- /dev/null
+++ b/include/uapi/linux/connector.h
@@ -0,0 +1,77 @@
+/*
+ * 	connector.h
+ * 
+ * 2004-2005 Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
+ * All rights reserved.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _UAPI__CONNECTOR_H
+#define _UAPI__CONNECTOR_H
+
+#include <linux/types.h>
+
+/*
+ * Process Events connector unique ids -- used for message routing
+ */
+#define CN_IDX_PROC			0x1
+#define CN_VAL_PROC			0x1
+#define CN_IDX_CIFS			0x2
+#define CN_VAL_CIFS                     0x1
+#define CN_W1_IDX			0x3	/* w1 communication */
+#define CN_W1_VAL			0x1
+#define CN_IDX_V86D			0x4
+#define CN_VAL_V86D_UVESAFB		0x1
+#define CN_IDX_BB			0x5	/* BlackBoard, from the TSP GPL sampling framework */
+#define CN_DST_IDX			0x6
+#define CN_DST_VAL			0x1
+#define CN_IDX_DM			0x7	/* Device Mapper */
+#define CN_VAL_DM_USERSPACE_LOG		0x1
+#define CN_IDX_DRBD			0x8
+#define CN_VAL_DRBD			0x1
+#define CN_KVP_IDX			0x9	/* HyperV KVP */
+#define CN_KVP_VAL			0x1	/* queries from the kernel */
+
+#define CN_NETLINK_USERS		10	/* Highest index + 1 */
+
+/*
+ * Maximum connector's message size.
+ */
+#define CONNECTOR_MAX_MSG_SIZE		16384
+
+/*
+ * idx and val are unique identifiers which 
+ * are used for message routing and 
+ * must be registered in connector.h for in-kernel usage.
+ */
+
+struct cb_id {
+	__u32 idx;
+	__u32 val;
+};
+
+struct cn_msg {
+	struct cb_id id;
+
+	__u32 seq;
+	__u32 ack;
+
+	__u16 len;		/* Length of the following data */
+	__u16 flags;
+	__u8 data[0];
+};
+
+#endif /* _UAPI__CONNECTOR_H */
diff --git a/include/linux/const.h b/include/uapi/linux/const.h
similarity index 100%
rename from include/linux/const.h
rename to include/uapi/linux/const.h
diff --git a/include/uapi/linux/cramfs_fs.h b/include/uapi/linux/cramfs_fs.h
new file mode 100644
index 0000000..e4611a9
--- /dev/null
+++ b/include/uapi/linux/cramfs_fs.h
@@ -0,0 +1,88 @@
+#ifndef _UAPI__CRAMFS_H
+#define _UAPI__CRAMFS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+#define CRAMFS_SIGNATURE	"Compressed ROMFS"
+
+/*
+ * Width of various bitfields in struct cramfs_inode.
+ * Primarily used to generate warnings in mkcramfs.
+ */
+#define CRAMFS_MODE_WIDTH 16
+#define CRAMFS_UID_WIDTH 16
+#define CRAMFS_SIZE_WIDTH 24
+#define CRAMFS_GID_WIDTH 8
+#define CRAMFS_NAMELEN_WIDTH 6
+#define CRAMFS_OFFSET_WIDTH 26
+
+/*
+ * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs
+ * path length is 63 << 2 = 252.
+ */
+#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2)
+
+/*
+ * Reasonably terse representation of the inode data.
+ */
+struct cramfs_inode {
+	__u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH;
+	/* SIZE for device files is i_rdev */
+	__u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH;
+	/* NAMELEN is the length of the file name, divided by 4 and
+           rounded up.  (cramfs doesn't support hard links.) */
+	/* OFFSET: For symlinks and non-empty regular files, this
+	   contains the offset (divided by 4) of the file data in
+	   compressed form (starting with an array of block pointers;
+	   see README).  For non-empty directories it is the offset
+	   (divided by 4) of the inode of the first file in that
+	   directory.  For anything else, offset is zero. */
+	__u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH;
+};
+
+struct cramfs_info {
+	__u32 crc;
+	__u32 edition;
+	__u32 blocks;
+	__u32 files;
+};
+
+/*
+ * Superblock information at the beginning of the FS.
+ */
+struct cramfs_super {
+	__u32 magic;			/* 0x28cd3d45 - random number */
+	__u32 size;			/* length in bytes */
+	__u32 flags;			/* feature flags */
+	__u32 future;			/* reserved for future use */
+	__u8 signature[16];		/* "Compressed ROMFS" */
+	struct cramfs_info fsid;	/* unique filesystem info */
+	__u8 name[16];			/* user-defined name */
+	struct cramfs_inode root;	/* root inode data */
+};
+
+/*
+ * Feature flags
+ *
+ * 0x00000000 - 0x000000ff: features that work for all past kernels
+ * 0x00000100 - 0xffffffff: features that don't work for past kernels
+ */
+#define CRAMFS_FLAG_FSID_VERSION_2	0x00000001	/* fsid version #2 */
+#define CRAMFS_FLAG_SORTED_DIRS		0x00000002	/* sorted dirs */
+#define CRAMFS_FLAG_HOLES		0x00000100	/* support for holes */
+#define CRAMFS_FLAG_WRONG_SIGNATURE	0x00000200	/* reserved */
+#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET	0x00000400	/* shifted root fs */
+
+/*
+ * Valid values in super.flags.  Currently we refuse to mount
+ * if (flags & ~CRAMFS_SUPPORTED_FLAGS).  Maybe that should be
+ * changed to test super.future instead.
+ */
+#define CRAMFS_SUPPORTED_FLAGS	( 0x000000ff \
+				| CRAMFS_FLAG_HOLES \
+				| CRAMFS_FLAG_WRONG_SIGNATURE \
+				| CRAMFS_FLAG_SHIFTED_ROOT_OFFSET )
+
+
+#endif /* _UAPI__CRAMFS_H */
diff --git a/include/uapi/linux/cuda.h b/include/uapi/linux/cuda.h
new file mode 100644
index 0000000..286f9f1
--- /dev/null
+++ b/include/uapi/linux/cuda.h
@@ -0,0 +1,33 @@
+/*
+ * Definitions for talking to the CUDA.  The CUDA is a microcontroller
+ * which controls the ADB, system power, RTC, and various other things.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#ifndef _UAPI_LINUX_CUDA_H
+#define _UAPI_LINUX_CUDA_H
+
+/* CUDA commands (2nd byte) */
+#define CUDA_WARM_START		0
+#define CUDA_AUTOPOLL		1
+#define CUDA_GET_6805_ADDR	2
+#define CUDA_GET_TIME		3
+#define CUDA_GET_PRAM		7
+#define CUDA_SET_6805_ADDR	8
+#define CUDA_SET_TIME		9
+#define CUDA_POWERDOWN		0xa
+#define CUDA_POWERUP_TIME	0xb
+#define CUDA_SET_PRAM		0xc
+#define CUDA_MS_RESET		0xd
+#define CUDA_SEND_DFAC		0xe
+#define CUDA_RESET_SYSTEM	0x11
+#define CUDA_SET_IPL		0x12
+#define CUDA_SET_AUTO_RATE	0x14
+#define CUDA_GET_AUTO_RATE	0x16
+#define CUDA_SET_DEVICE_LIST	0x19
+#define CUDA_GET_DEVICE_LIST	0x1a
+#define CUDA_GET_SET_IIC	0x22
+
+
+#endif /* _UAPI_LINUX_CUDA_H */
diff --git a/include/uapi/linux/cyclades.h b/include/uapi/linux/cyclades.h
new file mode 100644
index 0000000..12b587a
--- /dev/null
+++ b/include/uapi/linux/cyclades.h
@@ -0,0 +1,493 @@
+/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
+ * linux/include/linux/cyclades.h
+ *
+ * This file was initially written by
+ * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
+ * Ivan Passos <ivan@cyclades.com>.
+ *
+ * This file contains the general definitions for the cyclades.c driver
+ *$Log: cyclades.h,v $
+ *Revision 3.1  2002/01/29 11:36:16  henrique
+ *added throttle field on struct cyclades_port to indicate whether the
+ *port is throttled or not
+ *
+ *Revision 3.1  2000/04/19 18:52:52  ivan
+ *converted address fields to unsigned long and added fields for physical
+ *addresses on cyclades_card structure;
+ *
+ *Revision 3.0  1998/11/02 14:20:59  ivan
+ *added nports field on cyclades_card structure;
+ *
+ *Revision 2.5  1998/08/03 16:57:01  ivan
+ *added cyclades_idle_stats structure;
+ * 
+ *Revision 2.4  1998/06/01 12:09:53  ivan
+ *removed closing_wait2 from cyclades_port structure;
+ *
+ *Revision 2.3  1998/03/16 18:01:12  ivan
+ *changes in the cyclades_port structure to get it closer to the 
+ *standard serial port structure;
+ *added constants for new ioctls;
+ *
+ *Revision 2.2  1998/02/17 16:50:00  ivan
+ *changes in the cyclades_port structure (addition of shutdown_wait and 
+ *chip_rev variables);
+ *added constants for new ioctls and for CD1400 rev. numbers.
+ *
+ *Revision 2.1	1997/10/24 16:03:00  ivan
+ *added rflow (which allows enabling the CD1400 special flow control 
+ *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to 
+ *cyclades_port structure;
+ *added Alpha support
+ *
+ *Revision 2.0  1997/06/30 10:30:00  ivan
+ *added some new doorbell command constants related to IOCTLW and
+ *UART error signaling
+ *
+ *Revision 1.8  1997/06/03 15:30:00  ivan
+ *added constant ZFIRM_HLT
+ *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
+ *
+ *Revision 1.7  1997/03/26 10:30:00  daniel
+ *new entries at the end of cyclades_port struct to reallocate
+ *variables illegally allocated within card memory.
+ *
+ *Revision 1.6  1996/09/09 18:35:30  bentson
+ *fold in changes for Cyclom-Z -- including structures for
+ *communicating with board as well modest changes to original
+ *structures to support new features.
+ *
+ *Revision 1.5  1995/11/13 21:13:31  bentson
+ *changes suggested by Michael Chastain <mec@duracef.shout.net>
+ *to support use of this file in non-kernel applications
+ *
+ *
+ */
+
+#ifndef _UAPI_LINUX_CYCLADES_H
+#define _UAPI_LINUX_CYCLADES_H
+
+#include <linux/types.h>
+
+struct cyclades_monitor {
+        unsigned long           int_count;
+        unsigned long           char_count;
+        unsigned long           char_max;
+        unsigned long           char_last;
+};
+
+/*
+ * These stats all reflect activity since the device was last initialized.
+ * (i.e., since the port was opened with no other processes already having it
+ * open)
+ */
+struct cyclades_idle_stats {
+    __kernel_time_t in_use;	/* Time device has been in use (secs) */
+    __kernel_time_t recv_idle;	/* Time since last char received (secs) */
+    __kernel_time_t xmit_idle;	/* Time since last char transmitted (secs) */
+    unsigned long  recv_bytes;	/* Bytes received */
+    unsigned long  xmit_bytes;	/* Bytes transmitted */
+    unsigned long  overruns;	/* Input overruns */
+    unsigned long  frame_errs;	/* Input framing errors */
+    unsigned long  parity_errs;	/* Input parity errors */
+};
+
+#define CYCLADES_MAGIC  0x4359
+
+#define CYGETMON                0x435901
+#define CYGETTHRESH             0x435902
+#define CYSETTHRESH             0x435903
+#define CYGETDEFTHRESH          0x435904
+#define CYSETDEFTHRESH          0x435905
+#define CYGETTIMEOUT            0x435906
+#define CYSETTIMEOUT            0x435907
+#define CYGETDEFTIMEOUT         0x435908
+#define CYSETDEFTIMEOUT         0x435909
+#define CYSETRFLOW		0x43590a
+#define CYGETRFLOW		0x43590b
+#define CYSETRTSDTR_INV		0x43590c
+#define CYGETRTSDTR_INV		0x43590d
+#define CYZSETPOLLCYCLE		0x43590e
+#define CYZGETPOLLCYCLE		0x43590f
+#define CYGETCD1400VER		0x435910
+#define	CYSETWAIT		0x435912
+#define	CYGETWAIT		0x435913
+
+/*************** CYCLOM-Z ADDITIONS ***************/
+
+#define CZIOC           ('M' << 8)
+#define CZ_NBOARDS      (CZIOC|0xfa)
+#define CZ_BOOT_START   (CZIOC|0xfb)
+#define CZ_BOOT_DATA    (CZIOC|0xfc)
+#define CZ_BOOT_END     (CZIOC|0xfd)
+#define CZ_TEST         (CZIOC|0xfe)
+
+#define CZ_DEF_POLL	(HZ/25)
+
+#define MAX_BOARD       4       /* Max number of boards */
+#define MAX_DEV         256     /* Max number of ports total */
+#define	CYZ_MAX_SPEED	921600
+
+#define	CYZ_FIFO_SIZE	16
+
+#define CYZ_BOOT_NWORDS 0x100
+struct CYZ_BOOT_CTRL {
+        unsigned short  nboard;
+        int             status[MAX_BOARD];
+        int             nchannel[MAX_BOARD];
+        int             fw_rev[MAX_BOARD];
+        unsigned long   offset;
+        unsigned long   data[CYZ_BOOT_NWORDS];
+};
+
+
+#ifndef DP_WINDOW_SIZE
+/*
+ *	Memory Window Sizes
+ */
+
+#define	DP_WINDOW_SIZE		(0x00080000)	/* window size 512 Kb */
+#define	ZE_DP_WINDOW_SIZE	(0x00100000)	/* window size 1 Mb (Ze and
+						  8Zo V.2 */
+#define	CTRL_WINDOW_SIZE	(0x00000080)	/* runtime regs 128 bytes */
+
+/*
+ *	CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
+ *	normally will access only interested on the fpga_id, fpga_version,
+ *	start_cpu and stop_cpu.
+ */
+
+struct	CUSTOM_REG {
+	__u32	fpga_id;		/* FPGA Identification Register */
+	__u32	fpga_version;		/* FPGA Version Number Register */
+	__u32	cpu_start;		/* CPU start Register (write) */
+	__u32	cpu_stop;		/* CPU stop Register (write) */
+	__u32	misc_reg;		/* Miscellaneous Register */
+	__u32	idt_mode;		/* IDT mode Register */
+	__u32	uart_irq_status;	/* UART IRQ status Register */
+	__u32	clear_timer0_irq;	/* Clear timer interrupt Register */
+	__u32	clear_timer1_irq;	/* Clear timer interrupt Register */
+	__u32	clear_timer2_irq;	/* Clear timer interrupt Register */
+	__u32	test_register;		/* Test Register */
+	__u32	test_count;		/* Test Count Register */
+	__u32	timer_select;		/* Timer select register */
+	__u32	pr_uart_irq_status;	/* Prioritized UART IRQ stat Reg */
+	__u32	ram_wait_state;		/* RAM wait-state Register */
+	__u32	uart_wait_state;	/* UART wait-state Register */
+	__u32	timer_wait_state;	/* timer wait-state Register */
+	__u32	ack_wait_state;		/* ACK wait State Register */
+};
+
+/*
+ *	RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
+ *	registers. This structure can be used to access the 9060 registers
+ *	(memory mapped).
+ */
+
+struct RUNTIME_9060 {
+	__u32	loc_addr_range;	/* 00h - Local Address Range */
+	__u32	loc_addr_base;	/* 04h - Local Address Base */
+	__u32	loc_arbitr;	/* 08h - Local Arbitration */
+	__u32	endian_descr;	/* 0Ch - Big/Little Endian Descriptor */
+	__u32	loc_rom_range;	/* 10h - Local ROM Range */
+	__u32	loc_rom_base;	/* 14h - Local ROM Base */
+	__u32	loc_bus_descr;	/* 18h - Local Bus descriptor */
+	__u32	loc_range_mst;	/* 1Ch - Local Range for Master to PCI */
+	__u32	loc_base_mst;	/* 20h - Local Base for Master PCI */
+	__u32	loc_range_io;	/* 24h - Local Range for Master IO */
+	__u32	pci_base_mst;	/* 28h - PCI Base for Master PCI */
+	__u32	pci_conf_io;	/* 2Ch - PCI configuration for Master IO */
+	__u32	filler1;	/* 30h */
+	__u32	filler2;	/* 34h */
+	__u32	filler3;	/* 38h */
+	__u32	filler4;	/* 3Ch */
+	__u32	mail_box_0;	/* 40h - Mail Box 0 */
+	__u32	mail_box_1;	/* 44h - Mail Box 1 */
+	__u32	mail_box_2;	/* 48h - Mail Box 2 */
+	__u32	mail_box_3;	/* 4Ch - Mail Box 3 */
+	__u32	filler5;	/* 50h */
+	__u32	filler6;	/* 54h */
+	__u32	filler7;	/* 58h */
+	__u32	filler8;	/* 5Ch */
+	__u32	pci_doorbell;	/* 60h - PCI to Local Doorbell */
+	__u32	loc_doorbell;	/* 64h - Local to PCI Doorbell */
+	__u32	intr_ctrl_stat;	/* 68h - Interrupt Control/Status */
+	__u32	init_ctrl;	/* 6Ch - EEPROM control, Init Control, etc */
+};
+
+/* Values for the Local Base Address re-map register */
+
+#define	WIN_RAM		0x00000001L	/* set the sliding window to RAM */
+#define	WIN_CREG	0x14000001L	/* set the window to custom Registers */
+
+/* Values timer select registers */
+
+#define	TIMER_BY_1M	0x00		/* clock divided by 1M */
+#define	TIMER_BY_256K	0x01		/* clock divided by 256k */
+#define	TIMER_BY_128K	0x02		/* clock divided by 128k */
+#define	TIMER_BY_32K	0x03		/* clock divided by 32k */
+
+/****************** ****************** *******************/
+#endif
+
+#ifndef ZFIRM_ID
+/* #include "zfwint.h" */
+/****************** ****************** *******************/
+/*
+ *	This file contains the definitions for interfacing with the
+ *	Cyclom-Z ZFIRM Firmware.
+ */
+
+/* General Constant definitions */
+
+#define	MAX_CHAN	64		/* max number of channels per board */
+
+/* firmware id structure (set after boot) */
+
+#define ID_ADDRESS	0x00000180L	/* signature/pointer address */
+#define	ZFIRM_ID	0x5557465AL	/* ZFIRM/U signature */
+#define	ZFIRM_HLT	0x59505B5CL	/* ZFIRM needs external power supply */
+#define	ZFIRM_RST	0x56040674L	/* RST signal (due to FW reset) */
+
+#define	ZF_TINACT_DEF	1000		/* default inactivity timeout 
+					   (1000 ms) */
+#define	ZF_TINACT	ZF_TINACT_DEF
+
+struct	FIRM_ID {
+	__u32	signature;		/* ZFIRM/U signature */
+	__u32	zfwctrl_addr;		/* pointer to ZFW_CTRL structure */
+};
+
+/* Op. System id */
+
+#define	C_OS_LINUX	0x00000030	/* generic Linux system */
+
+/* channel op_mode */
+
+#define	C_CH_DISABLE	0x00000000	/* channel is disabled */
+#define	C_CH_TXENABLE	0x00000001	/* channel Tx enabled */
+#define	C_CH_RXENABLE	0x00000002	/* channel Rx enabled */
+#define	C_CH_ENABLE	0x00000003	/* channel Tx/Rx enabled */
+#define	C_CH_LOOPBACK	0x00000004	/* Loopback mode */
+
+/* comm_parity - parity */
+
+#define	C_PR_NONE	0x00000000	/* None */
+#define	C_PR_ODD	0x00000001	/* Odd */
+#define C_PR_EVEN	0x00000002	/* Even */
+#define C_PR_MARK	0x00000004	/* Mark */
+#define C_PR_SPACE	0x00000008	/* Space */
+#define C_PR_PARITY	0x000000ff
+
+#define	C_PR_DISCARD	0x00000100	/* discard char with frame/par error */
+#define C_PR_IGNORE	0x00000200	/* ignore frame/par error */
+
+/* comm_data_l - data length and stop bits */
+
+#define C_DL_CS5	0x00000001
+#define C_DL_CS6	0x00000002
+#define C_DL_CS7	0x00000004
+#define C_DL_CS8	0x00000008
+#define	C_DL_CS		0x0000000f
+#define C_DL_1STOP	0x00000010
+#define C_DL_15STOP	0x00000020
+#define C_DL_2STOP	0x00000040
+#define	C_DL_STOP	0x000000f0
+
+/* interrupt enabling/status */
+
+#define	C_IN_DISABLE	0x00000000	/* zero, disable interrupts */
+#define	C_IN_TXBEMPTY	0x00000001	/* tx buffer empty */
+#define	C_IN_TXLOWWM	0x00000002	/* tx buffer below LWM */
+#define	C_IN_RXHIWM	0x00000010	/* rx buffer above HWM */
+#define	C_IN_RXNNDT	0x00000020	/* rx no new data timeout */
+#define	C_IN_MDCD	0x00000100	/* modem DCD change */
+#define	C_IN_MDSR	0x00000200	/* modem DSR change */
+#define	C_IN_MRI	0x00000400	/* modem RI change */
+#define	C_IN_MCTS	0x00000800	/* modem CTS change */
+#define	C_IN_RXBRK	0x00001000	/* Break received */
+#define	C_IN_PR_ERROR	0x00002000	/* parity error */
+#define	C_IN_FR_ERROR	0x00004000	/* frame error */
+#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
+#define C_IN_RXOFL	0x00010000      /* RX buffer overflow */
+#define C_IN_IOCTLW	0x00020000      /* I/O control w/ wait */
+#define C_IN_MRTS	0x00040000	/* modem RTS drop */
+#define C_IN_ICHAR	0x00080000
+ 
+/* flow control */
+
+#define	C_FL_OXX	0x00000001	/* output Xon/Xoff flow control */
+#define	C_FL_IXX	0x00000002	/* output Xon/Xoff flow control */
+#define C_FL_OIXANY	0x00000004	/* output Xon/Xoff (any xon) */
+#define	C_FL_SWFLOW	0x0000000f
+
+/* flow status */
+
+#define	C_FS_TXIDLE	0x00000000	/* no Tx data in the buffer or UART */
+#define	C_FS_SENDING	0x00000001	/* UART is sending data */
+#define	C_FS_SWFLOW	0x00000002	/* Tx is stopped by received Xoff */
+
+/* rs_control/rs_status RS-232 signals */
+
+#define C_RS_PARAM	0x80000000	/* Indicates presence of parameter in 
+					   IOCTLM command */
+#define	C_RS_RTS	0x00000001	/* RTS */
+#define	C_RS_DTR	0x00000004	/* DTR */
+#define	C_RS_DCD	0x00000100	/* CD */
+#define	C_RS_DSR	0x00000200	/* DSR */
+#define	C_RS_RI		0x00000400	/* RI */
+#define	C_RS_CTS	0x00000800	/* CTS */
+
+/* commands Host <-> Board */
+
+#define	C_CM_RESET	0x01		/* reset/flush buffers */
+#define	C_CM_IOCTL	0x02		/* re-read CH_CTRL */
+#define	C_CM_IOCTLW	0x03		/* re-read CH_CTRL, intr when done */
+#define	C_CM_IOCTLM	0x04		/* RS-232 outputs change */
+#define	C_CM_SENDXOFF	0x10		/* send Xoff */
+#define	C_CM_SENDXON	0x11		/* send Xon */
+#define C_CM_CLFLOW	0x12		/* Clear flow control (resume) */
+#define	C_CM_SENDBRK	0x41		/* send break */
+#define	C_CM_INTBACK	0x42		/* Interrupt back */
+#define	C_CM_SET_BREAK	0x43		/* Tx break on */
+#define	C_CM_CLR_BREAK	0x44		/* Tx break off */
+#define	C_CM_CMD_DONE	0x45		/* Previous command done */
+#define C_CM_INTBACK2	0x46		/* Alternate Interrupt back */
+#define	C_CM_TINACT	0x51		/* set inactivity detection */
+#define	C_CM_IRQ_ENBL	0x52		/* enable generation of interrupts */
+#define	C_CM_IRQ_DSBL	0x53		/* disable generation of interrupts */
+#define	C_CM_ACK_ENBL	0x54		/* enable acknowledged interrupt mode */
+#define	C_CM_ACK_DSBL	0x55		/* disable acknowledged intr mode */
+#define	C_CM_FLUSH_RX	0x56		/* flushes Rx buffer */
+#define	C_CM_FLUSH_TX	0x57		/* flushes Tx buffer */
+#define C_CM_Q_ENABLE	0x58		/* enables queue access from the 
+					   driver */
+#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
+					   driver */
+
+#define	C_CM_TXBEMPTY	0x60		/* Tx buffer is empty */
+#define	C_CM_TXLOWWM	0x61		/* Tx buffer low water mark */
+#define	C_CM_RXHIWM	0x62		/* Rx buffer high water mark */
+#define	C_CM_RXNNDT	0x63		/* rx no new data timeout */
+#define	C_CM_TXFEMPTY	0x64
+#define	C_CM_ICHAR	0x65
+#define	C_CM_MDCD	0x70		/* modem DCD change */
+#define	C_CM_MDSR	0x71		/* modem DSR change */
+#define	C_CM_MRI	0x72		/* modem RI change */
+#define	C_CM_MCTS	0x73		/* modem CTS change */
+#define C_CM_MRTS	0x74		/* modem RTS drop */
+#define	C_CM_RXBRK	0x84		/* Break received */
+#define	C_CM_PR_ERROR	0x85		/* Parity error */
+#define	C_CM_FR_ERROR	0x86		/* Frame error */
+#define C_CM_OVR_ERROR  0x87            /* Overrun error */
+#define C_CM_RXOFL	0x88            /* RX buffer overflow */
+#define	C_CM_CMDERROR	0x90		/* command error */
+#define	C_CM_FATAL	0x91		/* fatal error */
+#define	C_CM_HW_RESET	0x92		/* reset board */
+
+/*
+ *	CH_CTRL - This per port structure contains all parameters
+ *	that control an specific port. It can be seen as the
+ *	configuration registers of a "super-serial-controller".
+ */
+
+struct CH_CTRL {
+	__u32	op_mode;	/* operation mode */
+	__u32	intr_enable;	/* interrupt masking */
+	__u32	sw_flow;	/* SW flow control */
+	__u32	flow_status;	/* output flow status */
+	__u32	comm_baud;	/* baud rate  - numerically specified */
+	__u32	comm_parity;	/* parity */
+	__u32	comm_data_l;	/* data length/stop */
+	__u32	comm_flags;	/* other flags */
+	__u32	hw_flow;	/* HW flow control */
+	__u32	rs_control;	/* RS-232 outputs */
+	__u32	rs_status;	/* RS-232 inputs */
+	__u32	flow_xon;	/* xon char */
+	__u32	flow_xoff;	/* xoff char */
+	__u32	hw_overflow;	/* hw overflow counter */
+	__u32	sw_overflow;	/* sw overflow counter */
+	__u32	comm_error;	/* frame/parity error counter */
+	__u32 ichar;
+	__u32 filler[7];
+};
+
+
+/*
+ *	BUF_CTRL - This per channel structure contains
+ *	all Tx and Rx buffer control for a given channel.
+ */
+
+struct	BUF_CTRL	{
+	__u32	flag_dma;	/* buffers are in Host memory */
+	__u32	tx_bufaddr;	/* address of the tx buffer */
+	__u32	tx_bufsize;	/* tx buffer size */
+	__u32	tx_threshold;	/* tx low water mark */
+	__u32	tx_get;		/* tail index tx buf */
+	__u32	tx_put;		/* head index tx buf */
+	__u32	rx_bufaddr;	/* address of the rx buffer */
+	__u32	rx_bufsize;	/* rx buffer size */
+	__u32	rx_threshold;	/* rx high water mark */
+	__u32	rx_get;		/* tail index rx buf */
+	__u32	rx_put;		/* head index rx buf */
+	__u32	filler[5];	/* filler to align structures */
+};
+
+/*
+ *	BOARD_CTRL - This per board structure contains all global 
+ *	control fields related to the board.
+ */
+
+struct BOARD_CTRL {
+
+	/* static info provided by the on-board CPU */
+	__u32	n_channel;	/* number of channels */
+	__u32	fw_version;	/* firmware version */
+
+	/* static info provided by the driver */
+	__u32	op_system;	/* op_system id */
+	__u32	dr_version;	/* driver version */
+
+	/* board control area */
+	__u32	inactivity;	/* inactivity control */
+
+	/* host to FW commands */
+	__u32	hcmd_channel;	/* channel number */
+	__u32	hcmd_param;	/* pointer to parameters */
+
+	/* FW to Host commands */
+	__u32	fwcmd_channel;	/* channel number */
+	__u32	fwcmd_param;	/* pointer to parameters */
+	__u32	zf_int_queue_addr; /* offset for INT_QUEUE structure */
+
+	/* filler so the structures are aligned */
+	__u32	filler[6];
+};
+
+/* Host Interrupt Queue */
+
+#define QUEUE_SIZE	(10*MAX_CHAN)
+
+struct	INT_QUEUE {
+	unsigned char	intr_code[QUEUE_SIZE];
+	unsigned long	channel[QUEUE_SIZE];
+	unsigned long	param[QUEUE_SIZE];
+	unsigned long	put;
+	unsigned long	get;
+};
+
+/*
+ *	ZFW_CTRL - This is the data structure that includes all other
+ *	data structures used by the Firmware.
+ */
+ 
+struct ZFW_CTRL {
+	struct BOARD_CTRL	board_ctrl;
+	struct CH_CTRL		ch_ctrl[MAX_CHAN];
+	struct BUF_CTRL		buf_ctrl[MAX_CHAN];
+};
+
+/****************** ****************** *******************/
+#endif
+
+#endif /* _UAPI_LINUX_CYCLADES_H */
diff --git a/include/linux/cycx_cfm.h b/include/uapi/linux/cycx_cfm.h
similarity index 100%
rename from include/linux/cycx_cfm.h
rename to include/uapi/linux/cycx_cfm.h
diff --git a/include/linux/dcbnl.h b/include/uapi/linux/dcbnl.h
similarity index 100%
rename from include/linux/dcbnl.h
rename to include/uapi/linux/dcbnl.h
diff --git a/include/uapi/linux/dccp.h b/include/uapi/linux/dccp.h
new file mode 100644
index 0000000..52a9cd7
--- /dev/null
+++ b/include/uapi/linux/dccp.h
@@ -0,0 +1,237 @@
+#ifndef _UAPI_LINUX_DCCP_H
+#define _UAPI_LINUX_DCCP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/**
+ * struct dccp_hdr - generic part of DCCP packet header
+ *
+ * @dccph_sport - Relevant port on the endpoint that sent this packet
+ * @dccph_dport - Relevant port on the other endpoint
+ * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words
+ * @dccph_ccval - Used by the HC-Sender CCID
+ * @dccph_cscov - Parts of the packet that are covered by the Checksum field
+ * @dccph_checksum - Internet checksum, depends on dccph_cscov
+ * @dccph_x - 0 = 24 bit sequence number, 1 = 48
+ * @dccph_type - packet type, see DCCP_PKT_ prefixed macros
+ * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x
+ */
+struct dccp_hdr {
+	__be16	dccph_sport,
+		dccph_dport;
+	__u8	dccph_doff;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	dccph_cscov:4,
+		dccph_ccval:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8	dccph_ccval:4,
+		dccph_cscov:4;
+#else
+#error  "Adjust your <asm/byteorder.h> defines"
+#endif
+	__sum16	dccph_checksum;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	dccph_x:1,
+		dccph_type:4,
+		dccph_reserved:3;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8	dccph_reserved:3,
+		dccph_type:4,
+		dccph_x:1;
+#else
+#error  "Adjust your <asm/byteorder.h> defines"
+#endif
+	__u8	dccph_seq2;
+	__be16	dccph_seq;
+};
+
+/**
+ * struct dccp_hdr_ext - the low bits of a 48 bit seq packet
+ *
+ * @dccph_seq_low - low 24 bits of a 48 bit seq packet
+ */
+struct dccp_hdr_ext {
+	__be32	dccph_seq_low;
+};
+
+/**
+ * struct dccp_hdr_request - Connection initiation request header
+ *
+ * @dccph_req_service - Service to which the client app wants to connect
+ */
+struct dccp_hdr_request {
+	__be32	dccph_req_service;
+};
+/**
+ * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets
+ *
+ * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR
+ * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR
+ */
+struct dccp_hdr_ack_bits {
+	__be16	dccph_reserved1;
+	__be16	dccph_ack_nr_high;
+	__be32	dccph_ack_nr_low;
+};
+/**
+ * struct dccp_hdr_response - Connection initiation response header
+ *
+ * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3)
+ * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request
+ */
+struct dccp_hdr_response {
+	struct dccp_hdr_ack_bits	dccph_resp_ack;
+	__be32				dccph_resp_service;
+};
+
+/**
+ * struct dccp_hdr_reset - Unconditionally shut down a connection
+ *
+ * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6)
+ * @dccph_reset_code - one of %dccp_reset_codes
+ * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6
+ */
+struct dccp_hdr_reset {
+	struct dccp_hdr_ack_bits	dccph_reset_ack;
+	__u8				dccph_reset_code,
+					dccph_reset_data[3];
+};
+
+enum dccp_pkt_type {
+	DCCP_PKT_REQUEST = 0,
+	DCCP_PKT_RESPONSE,
+	DCCP_PKT_DATA,
+	DCCP_PKT_ACK,
+	DCCP_PKT_DATAACK,
+	DCCP_PKT_CLOSEREQ,
+	DCCP_PKT_CLOSE,
+	DCCP_PKT_RESET,
+	DCCP_PKT_SYNC,
+	DCCP_PKT_SYNCACK,
+	DCCP_PKT_INVALID,
+};
+
+#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID
+
+static inline unsigned int dccp_packet_hdr_len(const __u8 type)
+{
+	if (type == DCCP_PKT_DATA)
+		return 0;
+	if (type == DCCP_PKT_DATAACK	||
+	    type == DCCP_PKT_ACK	||
+	    type == DCCP_PKT_SYNC	||
+	    type == DCCP_PKT_SYNCACK	||
+	    type == DCCP_PKT_CLOSE	||
+	    type == DCCP_PKT_CLOSEREQ)
+		return sizeof(struct dccp_hdr_ack_bits);
+	if (type == DCCP_PKT_REQUEST)
+		return sizeof(struct dccp_hdr_request);
+	if (type == DCCP_PKT_RESPONSE)
+		return sizeof(struct dccp_hdr_response);
+	return sizeof(struct dccp_hdr_reset);
+}
+enum dccp_reset_codes {
+	DCCP_RESET_CODE_UNSPECIFIED = 0,
+	DCCP_RESET_CODE_CLOSED,
+	DCCP_RESET_CODE_ABORTED,
+	DCCP_RESET_CODE_NO_CONNECTION,
+	DCCP_RESET_CODE_PACKET_ERROR,
+	DCCP_RESET_CODE_OPTION_ERROR,
+	DCCP_RESET_CODE_MANDATORY_ERROR,
+	DCCP_RESET_CODE_CONNECTION_REFUSED,
+	DCCP_RESET_CODE_BAD_SERVICE_CODE,
+	DCCP_RESET_CODE_TOO_BUSY,
+	DCCP_RESET_CODE_BAD_INIT_COOKIE,
+	DCCP_RESET_CODE_AGGRESSION_PENALTY,
+
+	DCCP_MAX_RESET_CODES		/* Leave at the end!  */
+};
+
+/* DCCP options */
+enum {
+	DCCPO_PADDING = 0,
+	DCCPO_MANDATORY = 1,
+	DCCPO_MIN_RESERVED = 3,
+	DCCPO_MAX_RESERVED = 31,
+	DCCPO_CHANGE_L = 32,
+	DCCPO_CONFIRM_L = 33,
+	DCCPO_CHANGE_R = 34,
+	DCCPO_CONFIRM_R = 35,
+	DCCPO_NDP_COUNT = 37,
+	DCCPO_ACK_VECTOR_0 = 38,
+	DCCPO_ACK_VECTOR_1 = 39,
+	DCCPO_TIMESTAMP = 41,
+	DCCPO_TIMESTAMP_ECHO = 42,
+	DCCPO_ELAPSED_TIME = 43,
+	DCCPO_MAX = 45,
+	DCCPO_MIN_RX_CCID_SPECIFIC = 128,	/* from sender to receiver */
+	DCCPO_MAX_RX_CCID_SPECIFIC = 191,
+	DCCPO_MIN_TX_CCID_SPECIFIC = 192,	/* from receiver to sender */
+	DCCPO_MAX_TX_CCID_SPECIFIC = 255,
+};
+/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */
+#define DCCP_SINGLE_OPT_MAXLEN	253
+
+/* DCCP CCIDS */
+enum {
+	DCCPC_CCID2 = 2,
+	DCCPC_CCID3 = 3,
+};
+
+/* DCCP features (RFC 4340 section 6.4) */
+enum dccp_feature_numbers {
+	DCCPF_RESERVED = 0,
+	DCCPF_CCID = 1,
+	DCCPF_SHORT_SEQNOS = 2,
+	DCCPF_SEQUENCE_WINDOW = 3,
+	DCCPF_ECN_INCAPABLE = 4,
+	DCCPF_ACK_RATIO = 5,
+	DCCPF_SEND_ACK_VECTOR = 6,
+	DCCPF_SEND_NDP_COUNT = 7,
+	DCCPF_MIN_CSUM_COVER = 8,
+	DCCPF_DATA_CHECKSUM = 9,
+	/* 10-127 reserved */
+	DCCPF_MIN_CCID_SPECIFIC = 128,
+	DCCPF_SEND_LEV_RATE = 192,	/* RFC 4342, sec. 8.4 */
+	DCCPF_MAX_CCID_SPECIFIC = 255,
+};
+
+/* DCCP socket control message types for cmsg */
+enum dccp_cmsg_type {
+	DCCP_SCM_PRIORITY = 1,
+	DCCP_SCM_QPOLICY_MAX = 0xFFFF,
+	/* ^-- Up to here reserved exclusively for qpolicy parameters */
+	DCCP_SCM_MAX
+};
+
+/* DCCP priorities for outgoing/queued packets */
+enum dccp_packet_dequeueing_policy {
+	DCCPQ_POLICY_SIMPLE,
+	DCCPQ_POLICY_PRIO,
+	DCCPQ_POLICY_MAX
+};
+
+/* DCCP socket options */
+#define DCCP_SOCKOPT_PACKET_SIZE	1 /* XXX deprecated, without effect */
+#define DCCP_SOCKOPT_SERVICE		2
+#define DCCP_SOCKOPT_CHANGE_L		3
+#define DCCP_SOCKOPT_CHANGE_R		4
+#define DCCP_SOCKOPT_GET_CUR_MPS	5
+#define DCCP_SOCKOPT_SERVER_TIMEWAIT	6
+#define DCCP_SOCKOPT_SEND_CSCOV		10
+#define DCCP_SOCKOPT_RECV_CSCOV		11
+#define DCCP_SOCKOPT_AVAILABLE_CCIDS	12
+#define DCCP_SOCKOPT_CCID		13
+#define DCCP_SOCKOPT_TX_CCID		14
+#define DCCP_SOCKOPT_RX_CCID		15
+#define DCCP_SOCKOPT_QPOLICY_ID		16
+#define DCCP_SOCKOPT_QPOLICY_TXQLEN	17
+#define DCCP_SOCKOPT_CCID_RX_INFO	128
+#define DCCP_SOCKOPT_CCID_TX_INFO	192
+
+/* maximum number of services provided on the same listening port */
+#define DCCP_SERVICE_LIST_MAX_LEN      32
+
+
+#endif /* _UAPI_LINUX_DCCP_H */
diff --git a/include/uapi/linux/dlm.h b/include/uapi/linux/dlm.h
new file mode 100644
index 0000000..1f73cc0
--- /dev/null
+++ b/include/uapi/linux/dlm.h
@@ -0,0 +1,75 @@
+/******************************************************************************
+*******************************************************************************
+**
+**  Copyright (C) Sistina Software, Inc.  1997-2003  All rights reserved.
+**  Copyright (C) 2004-2011 Red Hat, Inc.  All rights reserved.
+**
+**  This copyrighted material is made available to anyone wishing to use,
+**  modify, copy, or redistribute it subject to the terms and conditions
+**  of the GNU General Public License v.2.
+**
+*******************************************************************************
+******************************************************************************/
+
+#ifndef _UAPI__DLM_DOT_H__
+#define _UAPI__DLM_DOT_H__
+
+/*
+ * Interface to Distributed Lock Manager (DLM)
+ * routines and structures to use DLM lockspaces
+ */
+
+/* Lock levels and flags are here */
+#include <linux/dlmconstants.h>
+#include <linux/types.h>
+
+typedef void dlm_lockspace_t;
+
+/*
+ * Lock status block
+ *
+ * Use this structure to specify the contents of the lock value block.  For a
+ * conversion request, this structure is used to specify the lock ID of the
+ * lock.  DLM writes the status of the lock request and the lock ID assigned
+ * to the request in the lock status block.
+ *
+ * sb_lkid: the returned lock ID.  It is set on new (non-conversion) requests.
+ * It is available when dlm_lock returns.
+ *
+ * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules
+ * shown for the DLM_LKF_VALBLK flag.
+ *
+ * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock,
+ * it was first demoted to NL to avoid conversion deadlock.
+ * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid.
+ *
+ * sb_status: the returned status of the lock request set prior to AST
+ * execution.  Possible return values:
+ *
+ * 0 if lock request was successful
+ * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE
+ * -DLM_EUNLOCK if unlock request was successful
+ * -DLM_ECANCEL if a cancel completed successfully
+ * -EDEADLK if a deadlock was detected
+ * -ETIMEDOUT if the lock request was canceled due to a timeout
+ */
+
+#define DLM_SBF_DEMOTED		0x01
+#define DLM_SBF_VALNOTVALID	0x02
+#define DLM_SBF_ALTMODE		0x04
+
+struct dlm_lksb {
+	int 	 sb_status;
+	__u32	 sb_lkid;
+	char 	 sb_flags;
+	char *	 sb_lvbptr;
+};
+
+/* dlm_new_lockspace() flags */
+
+#define DLM_LSFL_TIMEWARN	0x00000002
+#define DLM_LSFL_FS     	0x00000004
+#define DLM_LSFL_NEWEXCL     	0x00000008
+
+
+#endif /* _UAPI__DLM_DOT_H__ */
diff --git a/include/linux/dlm_device.h b/include/uapi/linux/dlm_device.h
similarity index 100%
rename from include/linux/dlm_device.h
rename to include/uapi/linux/dlm_device.h
diff --git a/include/linux/dlm_netlink.h b/include/uapi/linux/dlm_netlink.h
similarity index 100%
rename from include/linux/dlm_netlink.h
rename to include/uapi/linux/dlm_netlink.h
diff --git a/include/uapi/linux/dlm_plock.h b/include/uapi/linux/dlm_plock.h
new file mode 100644
index 0000000..6ae692c
--- /dev/null
+++ b/include/uapi/linux/dlm_plock.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2005-2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ */
+
+#ifndef _UAPI__DLM_PLOCK_DOT_H__
+#define _UAPI__DLM_PLOCK_DOT_H__
+
+#include <linux/types.h>
+
+#define DLM_PLOCK_MISC_NAME		"dlm_plock"
+
+#define DLM_PLOCK_VERSION_MAJOR	1
+#define DLM_PLOCK_VERSION_MINOR	2
+#define DLM_PLOCK_VERSION_PATCH	0
+
+enum {
+	DLM_PLOCK_OP_LOCK = 1,
+	DLM_PLOCK_OP_UNLOCK,
+	DLM_PLOCK_OP_GET,
+};
+
+#define DLM_PLOCK_FL_CLOSE 1
+
+struct dlm_plock_info {
+	__u32 version[3];
+	__u8 optype;
+	__u8 ex;
+	__u8 wait;
+	__u8 flags;
+	__u32 pid;
+	__s32 nodeid;
+	__s32 rv;
+	__u32 fsid;
+	__u64 number;
+	__u64 start;
+	__u64 end;
+	__u64 owner;
+};
+
+
+#endif /* _UAPI__DLM_PLOCK_DOT_H__ */
diff --git a/include/linux/dlmconstants.h b/include/uapi/linux/dlmconstants.h
similarity index 100%
rename from include/linux/dlmconstants.h
rename to include/uapi/linux/dlmconstants.h
diff --git a/include/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h
similarity index 100%
rename from include/linux/dm-ioctl.h
rename to include/uapi/linux/dm-ioctl.h
diff --git a/include/linux/dm-log-userspace.h b/include/uapi/linux/dm-log-userspace.h
similarity index 100%
rename from include/linux/dm-log-userspace.h
rename to include/uapi/linux/dm-log-userspace.h
diff --git a/include/linux/dn.h b/include/uapi/linux/dn.h
similarity index 100%
rename from include/linux/dn.h
rename to include/uapi/linux/dn.h
diff --git a/include/linux/dqblk_xfs.h b/include/uapi/linux/dqblk_xfs.h
similarity index 100%
rename from include/linux/dqblk_xfs.h
rename to include/uapi/linux/dqblk_xfs.h
diff --git a/include/uapi/linux/edd.h b/include/uapi/linux/edd.h
new file mode 100644
index 0000000..89240a0
--- /dev/null
+++ b/include/uapi/linux/edd.h
@@ -0,0 +1,191 @@
+/*
+ * linux/include/linux/edd.h
+ *  Copyright (C) 2002, 2003, 2004 Dell Inc.
+ *  by Matt Domsch <Matt_Domsch@dell.com>
+ *
+ * structures and definitions for the int 13h, ax={41,48}h
+ * BIOS Enhanced Disk Drive Services
+ * This is based on the T13 group document D1572 Revision 0 (August 14 2002)
+ * available at http://www.t13.org/docs2002/d1572r0.pdf.  It is
+ * very similar to D1484 Revision 3 http://www.t13.org/docs2002/d1484r3.pdf
+ *
+ * In a nutshell, arch/{i386,x86_64}/boot/setup.S populates a scratch
+ * table in the boot_params that contains a list of BIOS-enumerated
+ * boot devices.
+ * In arch/{i386,x86_64}/kernel/setup.c, this information is
+ * transferred into the edd structure, and in drivers/firmware/edd.c, that
+ * information is used to identify BIOS boot disk.  The code in setup.S
+ * is very sensitive to the size of these structures.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _UAPI_LINUX_EDD_H
+#define _UAPI_LINUX_EDD_H
+
+#include <linux/types.h>
+
+#define EDDNR 0x1e9		/* addr of number of edd_info structs at EDDBUF
+				   in boot_params - treat this as 1 byte  */
+#define EDDBUF	0xd00		/* addr of edd_info structs in boot_params */
+#define EDDMAXNR 6		/* number of edd_info structs starting at EDDBUF  */
+#define EDDEXTSIZE 8		/* change these if you muck with the structures */
+#define EDDPARMSIZE 74
+#define CHECKEXTENSIONSPRESENT 0x41
+#define GETDEVICEPARAMETERS 0x48
+#define LEGACYGETDEVICEPARAMETERS 0x08
+#define EDDMAGIC1 0x55AA
+#define EDDMAGIC2 0xAA55
+
+
+#define READ_SECTORS 0x02         /* int13 AH=0x02 is READ_SECTORS command */
+#define EDD_MBR_SIG_OFFSET 0x1B8  /* offset of signature in the MBR */
+#define EDD_MBR_SIG_BUF    0x290  /* addr in boot params */
+#define EDD_MBR_SIG_MAX 16        /* max number of signatures to store */
+#define EDD_MBR_SIG_NR_BUF 0x1ea  /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
+				     in boot_params - treat this as 1 byte  */
+
+#ifndef __ASSEMBLY__
+
+#define EDD_EXT_FIXED_DISK_ACCESS           (1 << 0)
+#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1)
+#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2)
+#define EDD_EXT_64BIT_EXTENSIONS            (1 << 3)
+
+#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0)
+#define EDD_INFO_GEOMETRY_VALID                (1 << 1)
+#define EDD_INFO_REMOVABLE                     (1 << 2)
+#define EDD_INFO_WRITE_VERIFY                  (1 << 3)
+#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION     (1 << 4)
+#define EDD_INFO_LOCKABLE                      (1 << 5)
+#define EDD_INFO_NO_MEDIA_PRESENT              (1 << 6)
+#define EDD_INFO_USE_INT13_FN50                (1 << 7)
+
+struct edd_device_params {
+	__u16 length;
+	__u16 info_flags;
+	__u32 num_default_cylinders;
+	__u32 num_default_heads;
+	__u32 sectors_per_track;
+	__u64 number_of_sectors;
+	__u16 bytes_per_sector;
+	__u32 dpte_ptr;		/* 0xFFFFFFFF for our purposes */
+	__u16 key;		/* = 0xBEDD */
+	__u8 device_path_info_length;	/* = 44 */
+	__u8 reserved2;
+	__u16 reserved3;
+	__u8 host_bus_type[4];
+	__u8 interface_type[8];
+	union {
+		struct {
+			__u16 base_address;
+			__u16 reserved1;
+			__u32 reserved2;
+		} __attribute__ ((packed)) isa;
+		struct {
+			__u8 bus;
+			__u8 slot;
+			__u8 function;
+			__u8 channel;
+			__u32 reserved;
+		} __attribute__ ((packed)) pci;
+		/* pcix is same as pci */
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) ibnd;
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) xprs;
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) htpt;
+		struct {
+			__u64 reserved;
+		} __attribute__ ((packed)) unknown;
+	} interface_path;
+	union {
+		struct {
+			__u8 device;
+			__u8 reserved1;
+			__u16 reserved2;
+			__u32 reserved3;
+			__u64 reserved4;
+		} __attribute__ ((packed)) ata;
+		struct {
+			__u8 device;
+			__u8 lun;
+			__u8 reserved1;
+			__u8 reserved2;
+			__u32 reserved3;
+			__u64 reserved4;
+		} __attribute__ ((packed)) atapi;
+		struct {
+			__u16 id;
+			__u64 lun;
+			__u16 reserved1;
+			__u32 reserved2;
+		} __attribute__ ((packed)) scsi;
+		struct {
+			__u64 serial_number;
+			__u64 reserved;
+		} __attribute__ ((packed)) usb;
+		struct {
+			__u64 eui;
+			__u64 reserved;
+		} __attribute__ ((packed)) i1394;
+		struct {
+			__u64 wwid;
+			__u64 lun;
+		} __attribute__ ((packed)) fibre;
+		struct {
+			__u64 identity_tag;
+			__u64 reserved;
+		} __attribute__ ((packed)) i2o;
+		struct {
+			__u32 array_number;
+			__u32 reserved1;
+			__u64 reserved2;
+		} __attribute__ ((packed)) raid;
+		struct {
+			__u8 device;
+			__u8 reserved1;
+			__u16 reserved2;
+			__u32 reserved3;
+			__u64 reserved4;
+		} __attribute__ ((packed)) sata;
+		struct {
+			__u64 reserved1;
+			__u64 reserved2;
+		} __attribute__ ((packed)) unknown;
+	} device_path;
+	__u8 reserved4;
+	__u8 checksum;
+} __attribute__ ((packed));
+
+struct edd_info {
+	__u8 device;
+	__u8 version;
+	__u16 interface_support;
+	__u16 legacy_max_cylinder;
+	__u8 legacy_max_head;
+	__u8 legacy_sectors_per_track;
+	struct edd_device_params params;
+} __attribute__ ((packed));
+
+struct edd {
+	unsigned int mbr_signature[EDD_MBR_SIG_MAX];
+	struct edd_info edd_info[EDDMAXNR];
+	unsigned char mbr_signature_nr;
+	unsigned char edd_info_nr;
+};
+
+#endif				/*!__ASSEMBLY__ */
+
+#endif /* _UAPI_LINUX_EDD_H */
diff --git a/include/linux/efs_fs_sb.h b/include/uapi/linux/efs_fs_sb.h
similarity index 100%
rename from include/linux/efs_fs_sb.h
rename to include/uapi/linux/efs_fs_sb.h
diff --git a/include/linux/elf-em.h b/include/uapi/linux/elf-em.h
similarity index 100%
rename from include/linux/elf-em.h
rename to include/uapi/linux/elf-em.h
diff --git a/include/linux/elf-fdpic.h b/include/uapi/linux/elf-fdpic.h
similarity index 99%
rename from include/linux/elf-fdpic.h
rename to include/uapi/linux/elf-fdpic.h
index 7cd2e80..1065078 100644
--- a/include/linux/elf-fdpic.h
+++ b/include/uapi/linux/elf-fdpic.h
@@ -31,6 +31,7 @@
 
 #define ELF32_FDPIC_LOADMAP_VERSION	0x0000
 
+#ifndef __KERNEL__
 /*
  * binfmt binary parameters structure
  */
@@ -58,7 +59,6 @@
 #define ELF_FDPIC_FLAG_PRESENT		0x80000000	/* T if this object is present */
 };
 
-#ifdef __KERNEL__
 #ifdef CONFIG_MMU
 extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
 				      struct elf_fdpic_params *interp_params,
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
new file mode 100644
index 0000000..126a817
--- /dev/null
+++ b/include/uapi/linux/elf.h
@@ -0,0 +1,414 @@
+#ifndef _UAPI_LINUX_ELF_H
+#define _UAPI_LINUX_ELF_H
+
+#include <linux/types.h>
+#include <linux/elf-em.h>
+
+/* 32-bit ELF base types. */
+typedef __u32	Elf32_Addr;
+typedef __u16	Elf32_Half;
+typedef __u32	Elf32_Off;
+typedef __s32	Elf32_Sword;
+typedef __u32	Elf32_Word;
+
+/* 64-bit ELF base types. */
+typedef __u64	Elf64_Addr;
+typedef __u16	Elf64_Half;
+typedef __s16	Elf64_SHalf;
+typedef __u64	Elf64_Off;
+typedef __s32	Elf64_Sword;
+typedef __u32	Elf64_Word;
+typedef __u64	Elf64_Xword;
+typedef __s64	Elf64_Sxword;
+
+/* These constants are for the segment types stored in the image headers */
+#define PT_NULL    0
+#define PT_LOAD    1
+#define PT_DYNAMIC 2
+#define PT_INTERP  3
+#define PT_NOTE    4
+#define PT_SHLIB   5
+#define PT_PHDR    6
+#define PT_TLS     7               /* Thread local storage segment */
+#define PT_LOOS    0x60000000      /* OS-specific */
+#define PT_HIOS    0x6fffffff      /* OS-specific */
+#define PT_LOPROC  0x70000000
+#define PT_HIPROC  0x7fffffff
+#define PT_GNU_EH_FRAME		0x6474e550
+
+#define PT_GNU_STACK	(PT_LOOS + 0x474e551)
+
+/*
+ * Extended Numbering
+ *
+ * If the real number of program header table entries is larger than
+ * or equal to PN_XNUM(0xffff), it is set to sh_info field of the
+ * section header at index 0, and PN_XNUM is set to e_phnum
+ * field. Otherwise, the section header at index 0 is zero
+ * initialized, if it exists.
+ *
+ * Specifications are available in:
+ *
+ * - Sun microsystems: Linker and Libraries.
+ *   Part No: 817-1984-17, September 2008.
+ *   URL: http://docs.sun.com/app/docs/doc/817-1984
+ *
+ * - System V ABI AMD64 Architecture Processor Supplement
+ *   Draft Version 0.99.,
+ *   May 11, 2009.
+ *   URL: http://www.x86-64.org/
+ */
+#define PN_XNUM 0xffff
+
+/* These constants define the different elf file types */
+#define ET_NONE   0
+#define ET_REL    1
+#define ET_EXEC   2
+#define ET_DYN    3
+#define ET_CORE   4
+#define ET_LOPROC 0xff00
+#define ET_HIPROC 0xffff
+
+/* This is the info that is needed to parse the dynamic section of the file */
+#define DT_NULL		0
+#define DT_NEEDED	1
+#define DT_PLTRELSZ	2
+#define DT_PLTGOT	3
+#define DT_HASH		4
+#define DT_STRTAB	5
+#define DT_SYMTAB	6
+#define DT_RELA		7
+#define DT_RELASZ	8
+#define DT_RELAENT	9
+#define DT_STRSZ	10
+#define DT_SYMENT	11
+#define DT_INIT		12
+#define DT_FINI		13
+#define DT_SONAME	14
+#define DT_RPATH 	15
+#define DT_SYMBOLIC	16
+#define DT_REL	        17
+#define DT_RELSZ	18
+#define DT_RELENT	19
+#define DT_PLTREL	20
+#define DT_DEBUG	21
+#define DT_TEXTREL	22
+#define DT_JMPREL	23
+#define DT_ENCODING	32
+#define OLD_DT_LOOS	0x60000000
+#define DT_LOOS		0x6000000d
+#define DT_HIOS		0x6ffff000
+#define DT_VALRNGLO	0x6ffffd00
+#define DT_VALRNGHI	0x6ffffdff
+#define DT_ADDRRNGLO	0x6ffffe00
+#define DT_ADDRRNGHI	0x6ffffeff
+#define DT_VERSYM	0x6ffffff0
+#define DT_RELACOUNT	0x6ffffff9
+#define DT_RELCOUNT	0x6ffffffa
+#define DT_FLAGS_1	0x6ffffffb
+#define DT_VERDEF	0x6ffffffc
+#define	DT_VERDEFNUM	0x6ffffffd
+#define DT_VERNEED	0x6ffffffe
+#define	DT_VERNEEDNUM	0x6fffffff
+#define OLD_DT_HIOS     0x6fffffff
+#define DT_LOPROC	0x70000000
+#define DT_HIPROC	0x7fffffff
+
+/* This info is needed when parsing the symbol table */
+#define STB_LOCAL  0
+#define STB_GLOBAL 1
+#define STB_WEAK   2
+
+#define STT_NOTYPE  0
+#define STT_OBJECT  1
+#define STT_FUNC    2
+#define STT_SECTION 3
+#define STT_FILE    4
+#define STT_COMMON  5
+#define STT_TLS     6
+
+#define ELF_ST_BIND(x)		((x) >> 4)
+#define ELF_ST_TYPE(x)		(((unsigned int) x) & 0xf)
+#define ELF32_ST_BIND(x)	ELF_ST_BIND(x)
+#define ELF32_ST_TYPE(x)	ELF_ST_TYPE(x)
+#define ELF64_ST_BIND(x)	ELF_ST_BIND(x)
+#define ELF64_ST_TYPE(x)	ELF_ST_TYPE(x)
+
+typedef struct dynamic{
+  Elf32_Sword d_tag;
+  union{
+    Elf32_Sword	d_val;
+    Elf32_Addr	d_ptr;
+  } d_un;
+} Elf32_Dyn;
+
+typedef struct {
+  Elf64_Sxword d_tag;		/* entry tag value */
+  union {
+    Elf64_Xword d_val;
+    Elf64_Addr d_ptr;
+  } d_un;
+} Elf64_Dyn;
+
+/* The following are used with relocations */
+#define ELF32_R_SYM(x) ((x) >> 8)
+#define ELF32_R_TYPE(x) ((x) & 0xff)
+
+#define ELF64_R_SYM(i)			((i) >> 32)
+#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
+
+typedef struct elf32_rel {
+  Elf32_Addr	r_offset;
+  Elf32_Word	r_info;
+} Elf32_Rel;
+
+typedef struct elf64_rel {
+  Elf64_Addr r_offset;	/* Location at which to apply the action */
+  Elf64_Xword r_info;	/* index and type of relocation */
+} Elf64_Rel;
+
+typedef struct elf32_rela{
+  Elf32_Addr	r_offset;
+  Elf32_Word	r_info;
+  Elf32_Sword	r_addend;
+} Elf32_Rela;
+
+typedef struct elf64_rela {
+  Elf64_Addr r_offset;	/* Location at which to apply the action */
+  Elf64_Xword r_info;	/* index and type of relocation */
+  Elf64_Sxword r_addend;	/* Constant addend used to compute value */
+} Elf64_Rela;
+
+typedef struct elf32_sym{
+  Elf32_Word	st_name;
+  Elf32_Addr	st_value;
+  Elf32_Word	st_size;
+  unsigned char	st_info;
+  unsigned char	st_other;
+  Elf32_Half	st_shndx;
+} Elf32_Sym;
+
+typedef struct elf64_sym {
+  Elf64_Word st_name;		/* Symbol name, index in string tbl */
+  unsigned char	st_info;	/* Type and binding attributes */
+  unsigned char	st_other;	/* No defined meaning, 0 */
+  Elf64_Half st_shndx;		/* Associated section index */
+  Elf64_Addr st_value;		/* Value of the symbol */
+  Elf64_Xword st_size;		/* Associated symbol size */
+} Elf64_Sym;
+
+
+#define EI_NIDENT	16
+
+typedef struct elf32_hdr{
+  unsigned char	e_ident[EI_NIDENT];
+  Elf32_Half	e_type;
+  Elf32_Half	e_machine;
+  Elf32_Word	e_version;
+  Elf32_Addr	e_entry;  /* Entry point */
+  Elf32_Off	e_phoff;
+  Elf32_Off	e_shoff;
+  Elf32_Word	e_flags;
+  Elf32_Half	e_ehsize;
+  Elf32_Half	e_phentsize;
+  Elf32_Half	e_phnum;
+  Elf32_Half	e_shentsize;
+  Elf32_Half	e_shnum;
+  Elf32_Half	e_shstrndx;
+} Elf32_Ehdr;
+
+typedef struct elf64_hdr {
+  unsigned char	e_ident[EI_NIDENT];	/* ELF "magic number" */
+  Elf64_Half e_type;
+  Elf64_Half e_machine;
+  Elf64_Word e_version;
+  Elf64_Addr e_entry;		/* Entry point virtual address */
+  Elf64_Off e_phoff;		/* Program header table file offset */
+  Elf64_Off e_shoff;		/* Section header table file offset */
+  Elf64_Word e_flags;
+  Elf64_Half e_ehsize;
+  Elf64_Half e_phentsize;
+  Elf64_Half e_phnum;
+  Elf64_Half e_shentsize;
+  Elf64_Half e_shnum;
+  Elf64_Half e_shstrndx;
+} Elf64_Ehdr;
+
+/* These constants define the permissions on sections in the program
+   header, p_flags. */
+#define PF_R		0x4
+#define PF_W		0x2
+#define PF_X		0x1
+
+typedef struct elf32_phdr{
+  Elf32_Word	p_type;
+  Elf32_Off	p_offset;
+  Elf32_Addr	p_vaddr;
+  Elf32_Addr	p_paddr;
+  Elf32_Word	p_filesz;
+  Elf32_Word	p_memsz;
+  Elf32_Word	p_flags;
+  Elf32_Word	p_align;
+} Elf32_Phdr;
+
+typedef struct elf64_phdr {
+  Elf64_Word p_type;
+  Elf64_Word p_flags;
+  Elf64_Off p_offset;		/* Segment file offset */
+  Elf64_Addr p_vaddr;		/* Segment virtual address */
+  Elf64_Addr p_paddr;		/* Segment physical address */
+  Elf64_Xword p_filesz;		/* Segment size in file */
+  Elf64_Xword p_memsz;		/* Segment size in memory */
+  Elf64_Xword p_align;		/* Segment alignment, file & memory */
+} Elf64_Phdr;
+
+/* sh_type */
+#define SHT_NULL	0
+#define SHT_PROGBITS	1
+#define SHT_SYMTAB	2
+#define SHT_STRTAB	3
+#define SHT_RELA	4
+#define SHT_HASH	5
+#define SHT_DYNAMIC	6
+#define SHT_NOTE	7
+#define SHT_NOBITS	8
+#define SHT_REL		9
+#define SHT_SHLIB	10
+#define SHT_DYNSYM	11
+#define SHT_NUM		12
+#define SHT_LOPROC	0x70000000
+#define SHT_HIPROC	0x7fffffff
+#define SHT_LOUSER	0x80000000
+#define SHT_HIUSER	0xffffffff
+
+/* sh_flags */
+#define SHF_WRITE	0x1
+#define SHF_ALLOC	0x2
+#define SHF_EXECINSTR	0x4
+#define SHF_MASKPROC	0xf0000000
+
+/* special section indexes */
+#define SHN_UNDEF	0
+#define SHN_LORESERVE	0xff00
+#define SHN_LOPROC	0xff00
+#define SHN_HIPROC	0xff1f
+#define SHN_ABS		0xfff1
+#define SHN_COMMON	0xfff2
+#define SHN_HIRESERVE	0xffff
+ 
+typedef struct elf32_shdr {
+  Elf32_Word	sh_name;
+  Elf32_Word	sh_type;
+  Elf32_Word	sh_flags;
+  Elf32_Addr	sh_addr;
+  Elf32_Off	sh_offset;
+  Elf32_Word	sh_size;
+  Elf32_Word	sh_link;
+  Elf32_Word	sh_info;
+  Elf32_Word	sh_addralign;
+  Elf32_Word	sh_entsize;
+} Elf32_Shdr;
+
+typedef struct elf64_shdr {
+  Elf64_Word sh_name;		/* Section name, index in string tbl */
+  Elf64_Word sh_type;		/* Type of section */
+  Elf64_Xword sh_flags;		/* Miscellaneous section attributes */
+  Elf64_Addr sh_addr;		/* Section virtual addr at execution */
+  Elf64_Off sh_offset;		/* Section file offset */
+  Elf64_Xword sh_size;		/* Size of section in bytes */
+  Elf64_Word sh_link;		/* Index of another section */
+  Elf64_Word sh_info;		/* Additional section information */
+  Elf64_Xword sh_addralign;	/* Section alignment */
+  Elf64_Xword sh_entsize;	/* Entry size if section holds table */
+} Elf64_Shdr;
+
+#define	EI_MAG0		0		/* e_ident[] indexes */
+#define	EI_MAG1		1
+#define	EI_MAG2		2
+#define	EI_MAG3		3
+#define	EI_CLASS	4
+#define	EI_DATA		5
+#define	EI_VERSION	6
+#define	EI_OSABI	7
+#define	EI_PAD		8
+
+#define	ELFMAG0		0x7f		/* EI_MAG */
+#define	ELFMAG1		'E'
+#define	ELFMAG2		'L'
+#define	ELFMAG3		'F'
+#define	ELFMAG		"\177ELF"
+#define	SELFMAG		4
+
+#define	ELFCLASSNONE	0		/* EI_CLASS */
+#define	ELFCLASS32	1
+#define	ELFCLASS64	2
+#define	ELFCLASSNUM	3
+
+#define ELFDATANONE	0		/* e_ident[EI_DATA] */
+#define ELFDATA2LSB	1
+#define ELFDATA2MSB	2
+
+#define EV_NONE		0		/* e_version, EI_VERSION */
+#define EV_CURRENT	1
+#define EV_NUM		2
+
+#define ELFOSABI_NONE	0
+#define ELFOSABI_LINUX	3
+
+#ifndef ELF_OSABI
+#define ELF_OSABI ELFOSABI_NONE
+#endif
+
+/*
+ * Notes used in ET_CORE. Architectures export some of the arch register sets
+ * using the corresponding note types via the PTRACE_GETREGSET and
+ * PTRACE_SETREGSET requests.
+ */
+#define NT_PRSTATUS	1
+#define NT_PRFPREG	2
+#define NT_PRPSINFO	3
+#define NT_TASKSTRUCT	4
+#define NT_AUXV		6
+/*
+ * Note to userspace developers: size of NT_SIGINFO note may increase
+ * in the future to accomodate more fields, don't assume it is fixed!
+ */
+#define NT_SIGINFO      0x53494749
+#define NT_FILE         0x46494c45
+#define NT_PRXFPREG     0x46e62b7f      /* copied from gdb5.1/include/elf/common.h */
+#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
+#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
+#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
+#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
+#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
+#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
+#define NT_S390_HIGH_GPRS	0x300	/* s390 upper register halves */
+#define NT_S390_TIMER	0x301		/* s390 timer register */
+#define NT_S390_TODCMP	0x302		/* s390 TOD clock comparator register */
+#define NT_S390_TODPREG	0x303		/* s390 TOD programmable register */
+#define NT_S390_CTRS	0x304		/* s390 control registers */
+#define NT_S390_PREFIX	0x305		/* s390 prefix register */
+#define NT_S390_LAST_BREAK	0x306	/* s390 breaking event address */
+#define NT_S390_SYSTEM_CALL	0x307	/* s390 system call restart data */
+#define NT_S390_TDB	0x308		/* s390 transaction diagnostic block */
+#define NT_ARM_VFP	0x400		/* ARM VFP/NEON registers */
+#define NT_ARM_TLS	0x401		/* ARM TLS register */
+#define NT_ARM_HW_BREAK	0x402		/* ARM hardware breakpoint registers */
+#define NT_ARM_HW_WATCH	0x403		/* ARM hardware watchpoint registers */
+
+
+/* Note header in a PT_NOTE section */
+typedef struct elf32_note {
+  Elf32_Word	n_namesz;	/* Name size */
+  Elf32_Word	n_descsz;	/* Content size */
+  Elf32_Word	n_type;		/* Content type */
+} Elf32_Nhdr;
+
+/* Note header in a PT_NOTE section */
+typedef struct elf64_note {
+  Elf64_Word n_namesz;	/* Name size */
+  Elf64_Word n_descsz;	/* Content size */
+  Elf64_Word n_type;	/* Content type */
+} Elf64_Nhdr;
+
+#endif /* _UAPI_LINUX_ELF_H */
diff --git a/include/uapi/linux/elfcore.h b/include/uapi/linux/elfcore.h
new file mode 100644
index 0000000..569737c
--- /dev/null
+++ b/include/uapi/linux/elfcore.h
@@ -0,0 +1,100 @@
+#ifndef _UAPI_LINUX_ELFCORE_H
+#define _UAPI_LINUX_ELFCORE_H
+
+#include <linux/types.h>
+#include <linux/signal.h>
+#include <linux/time.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/fs.h>
+
+struct elf_siginfo
+{
+	int	si_signo;			/* signal number */
+	int	si_code;			/* extra code */
+	int	si_errno;			/* errno */
+};
+
+
+#ifndef __KERNEL__
+typedef elf_greg_t greg_t;
+typedef elf_gregset_t gregset_t;
+typedef elf_fpregset_t fpregset_t;
+typedef elf_fpxregset_t fpxregset_t;
+#define NGREG ELF_NGREG
+#endif
+
+/*
+ * Definitions to generate Intel SVR4-like core files.
+ * These mostly have the same names as the SVR4 types with "elf_"
+ * tacked on the front to prevent clashes with linux definitions,
+ * and the typedef forms have been avoided.  This is mostly like
+ * the SVR4 structure, but more Linuxy, with things that Linux does
+ * not support and which gdb doesn't really use excluded.
+ * Fields present but not used are marked with "XXX".
+ */
+struct elf_prstatus
+{
+#if 0
+	long	pr_flags;	/* XXX Process flags */
+	short	pr_why;		/* XXX Reason for process halt */
+	short	pr_what;	/* XXX More detailed reason */
+#endif
+	struct elf_siginfo pr_info;	/* Info associated with signal */
+	short	pr_cursig;		/* Current signal */
+	unsigned long pr_sigpend;	/* Set of pending signals */
+	unsigned long pr_sighold;	/* Set of held signals */
+#if 0
+	struct sigaltstack pr_altstack;	/* Alternate stack info */
+	struct sigaction pr_action;	/* Signal action for current sig */
+#endif
+	pid_t	pr_pid;
+	pid_t	pr_ppid;
+	pid_t	pr_pgrp;
+	pid_t	pr_sid;
+	struct timeval pr_utime;	/* User time */
+	struct timeval pr_stime;	/* System time */
+	struct timeval pr_cutime;	/* Cumulative user time */
+	struct timeval pr_cstime;	/* Cumulative system time */
+#if 0
+	long	pr_instr;		/* Current instruction */
+#endif
+	elf_gregset_t pr_reg;	/* GP registers */
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	/* When using FDPIC, the loadmap addresses need to be communicated
+	 * to GDB in order for GDB to do the necessary relocations.  The
+	 * fields (below) used to communicate this information are placed
+	 * immediately after ``pr_reg'', so that the loadmap addresses may
+	 * be viewed as part of the register set if so desired.
+	 */
+	unsigned long pr_exec_fdpic_loadmap;
+	unsigned long pr_interp_fdpic_loadmap;
+#endif
+	int pr_fpvalid;		/* True if math co-processor being used.  */
+};
+
+#define ELF_PRARGSZ	(80)	/* Number of chars for args */
+
+struct elf_prpsinfo
+{
+	char	pr_state;	/* numeric process state */
+	char	pr_sname;	/* char for pr_state */
+	char	pr_zomb;	/* zombie */
+	char	pr_nice;	/* nice val */
+	unsigned long pr_flag;	/* flags */
+	__kernel_uid_t	pr_uid;
+	__kernel_gid_t	pr_gid;
+	pid_t	pr_pid, pr_ppid, pr_pgrp, pr_sid;
+	/* Lots missing */
+	char	pr_fname[16];	/* filename of executable */
+	char	pr_psargs[ELF_PRARGSZ];	/* initial part of arg list */
+};
+
+#ifndef __KERNEL__
+typedef struct elf_prstatus prstatus_t;
+typedef struct elf_prpsinfo prpsinfo_t;
+#define PRARGSZ ELF_PRARGSZ 
+#endif
+
+
+#endif /* _UAPI_LINUX_ELFCORE_H */
diff --git a/include/uapi/linux/errno.h b/include/uapi/linux/errno.h
new file mode 100644
index 0000000..70f2bd3
--- /dev/null
+++ b/include/uapi/linux/errno.h
@@ -0,0 +1 @@
+#include <asm/errno.h>
diff --git a/include/uapi/linux/errqueue.h b/include/uapi/linux/errqueue.h
new file mode 100644
index 0000000..aacd4fb
--- /dev/null
+++ b/include/uapi/linux/errqueue.h
@@ -0,0 +1,26 @@
+#ifndef _UAPI_LINUX_ERRQUEUE_H
+#define _UAPI_LINUX_ERRQUEUE_H
+
+#include <linux/types.h>
+
+struct sock_extended_err {
+	__u32	ee_errno;	
+	__u8	ee_origin;
+	__u8	ee_type;
+	__u8	ee_code;
+	__u8	ee_pad;
+	__u32   ee_info;
+	__u32   ee_data;
+};
+
+#define SO_EE_ORIGIN_NONE	0
+#define SO_EE_ORIGIN_LOCAL	1
+#define SO_EE_ORIGIN_ICMP	2
+#define SO_EE_ORIGIN_ICMP6	3
+#define SO_EE_ORIGIN_TXSTATUS	4
+#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS
+
+#define SO_EE_OFFENDER(ee)	((struct sockaddr*)((ee)+1))
+
+
+#endif /* _UAPI_LINUX_ERRQUEUE_H */
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
new file mode 100644
index 0000000..d3eaaaf
--- /dev/null
+++ b/include/uapi/linux/ethtool.h
@@ -0,0 +1,1085 @@
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ *                                christopher.leech@intel.com,
+ *                                scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
+ */
+
+#ifndef _UAPI_LINUX_ETHTOOL_H
+#define _UAPI_LINUX_ETHTOOL_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+/* This should work for both 32 and 64 bit userland. */
+struct ethtool_cmd {
+	__u32	cmd;
+	__u32	supported;	/* Features this interface supports */
+	__u32	advertising;	/* Features this interface advertises */
+	__u16	speed;	        /* The forced speed (lower bits) in
+				 * Mbps. Please use
+				 * ethtool_cmd_speed()/_set() to
+				 * access it */
+	__u8	duplex;		/* Duplex, half or full */
+	__u8	port;		/* Which connector port */
+	__u8	phy_address;	/* MDIO PHY address (PRTAD for clause 45).
+				 * May be read-only or read-write
+				 * depending on the driver.
+				 */
+	__u8	transceiver;	/* Which transceiver to use */
+	__u8	autoneg;	/* Enable or disable autonegotiation */
+	__u8	mdio_support;	/* MDIO protocols supported.  Read-only.
+				 * Not set by all drivers.
+				 */
+	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
+	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
+	__u16	speed_hi;       /* The forced speed (upper
+				 * bits) in Mbps. Please use
+				 * ethtool_cmd_speed()/_set() to
+				 * access it */
+	__u8	eth_tp_mdix;	/* twisted pair MDI-X status */
+	__u8    eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
+				   * link should be renegotiated if necessary
+				   */
+	__u32	lp_advertising;	/* Features the link partner advertises */
+	__u32	reserved[2];
+};
+
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+					 __u32 speed)
+{
+
+	ep->speed = (__u16)speed;
+	ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
+{
+	return (ep->speed_hi << 16) | ep->speed;
+}
+
+/* Device supports clause 22 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h>.  This should not be
+ * set if there are known to be no such peripherals present or if
+ * the driver only emulates clause 22 registers for compatibility.
+ */
+#define ETH_MDIO_SUPPORTS_C22	1
+
+/* Device supports clause 45 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
+ * This should not be set if there are known to be no such peripherals
+ * present.
+ */
+#define ETH_MDIO_SUPPORTS_C45	2
+
+#define ETHTOOL_FWVERS_LEN	32
+#define ETHTOOL_BUSINFO_LEN	32
+/* these strings are set to whatever the driver author decides... */
+struct ethtool_drvinfo {
+	__u32	cmd;
+	char	driver[32];	/* driver short name, "tulip", "eepro100" */
+	char	version[32];	/* driver version string */
+	char	fw_version[ETHTOOL_FWVERS_LEN];	/* firmware version string */
+	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
+				/* For PCI devices, use pci_name(pci_dev). */
+	char	reserved1[32];
+	char	reserved2[12];
+				/*
+				 * Some struct members below are filled in
+				 * using ops->get_sset_count().  Obtaining
+				 * this info from ethtool_drvinfo is now
+				 * deprecated; Use ETHTOOL_GSSET_INFO
+				 * instead.
+				 */
+	__u32	n_priv_flags;	/* number of flags valid in ETHTOOL_GPFLAGS */
+	__u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
+	__u32	testinfo_len;
+	__u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
+	__u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
+};
+
+#define SOPASS_MAX	6
+/* wake-on-lan settings */
+struct ethtool_wolinfo {
+	__u32	cmd;
+	__u32	supported;
+	__u32	wolopts;
+	__u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+};
+
+/* for passing single values */
+struct ethtool_value {
+	__u32	cmd;
+	__u32	data;
+};
+
+/* for passing big chunks of data */
+struct ethtool_regs {
+	__u32	cmd;
+	__u32	version; /* driver-specific, indicates different chips/revs */
+	__u32	len; /* bytes */
+	__u8	data[0];
+};
+
+/* for passing EEPROM chunks */
+struct ethtool_eeprom {
+	__u32	cmd;
+	__u32	magic;
+	__u32	offset; /* in bytes */
+	__u32	len; /* in bytes */
+	__u8	data[0];
+};
+
+/**
+ * struct ethtool_eee - Energy Efficient Ethernet information
+ * @cmd: ETHTOOL_{G,S}EEE
+ * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
+ *	for which there is EEE support.
+ * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
+ *	advertised as eee capable.
+ * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
+ *	combinations advertised by the link partner as eee capable.
+ * @eee_active: Result of the eee auto negotiation.
+ * @eee_enabled: EEE configured mode (enabled/disabled).
+ * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
+ *	that eee was negotiated.
+ * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
+ *	its tx lpi (after reaching 'idle' state). Effective only when eee
+ *	was negotiated and tx_lpi_enabled was set.
+ */
+struct ethtool_eee {
+	__u32	cmd;
+	__u32	supported;
+	__u32	advertised;
+	__u32	lp_advertised;
+	__u32	eee_active;
+	__u32	eee_enabled;
+	__u32	tx_lpi_enabled;
+	__u32	tx_lpi_timer;
+	__u32	reserved[2];
+};
+
+/**
+ * struct ethtool_modinfo - plugin module eeprom information
+ * @cmd: %ETHTOOL_GMODULEINFO
+ * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
+ * @eeprom_len: Length of the eeprom
+ *
+ * This structure is used to return the information to
+ * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
+ * The type code indicates the eeprom data format
+ */
+struct ethtool_modinfo {
+	__u32   cmd;
+	__u32   type;
+	__u32   eeprom_len;
+	__u32   reserved[8];
+};
+
+/**
+ * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
+ * @cmd: ETHTOOL_{G,S}COALESCE
+ * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
+ *	a packet arrives.
+ * @rx_max_coalesced_frames: Maximum number of packets to receive
+ *	before an RX interrupt.
+ * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
+ *	this value applies while an IRQ is being serviced by the host.
+ * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
+ *	except that this value applies while an IRQ is being serviced
+ *	by the host.
+ * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
+ *	a packet is sent.
+ * @tx_max_coalesced_frames: Maximum number of packets to be sent
+ *	before a TX interrupt.
+ * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
+ *	this value applies while an IRQ is being serviced by the host.
+ * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
+ *	except that this value applies while an IRQ is being serviced
+ *	by the host.
+ * @stats_block_coalesce_usecs: How many usecs to delay in-memory
+ *	statistics block updates.  Some drivers do not have an
+ *	in-memory statistic block, and in such cases this value is
+ *	ignored.  This value must not be zero.
+ * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
+ * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
+ * @pkt_rate_low: Threshold for low packet rate (packets per second).
+ * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
+ *	a packet arrives, when the packet rate is below @pkt_rate_low.
+ * @rx_max_coalesced_frames_low: Maximum number of packets to be received
+ *	before an RX interrupt, when the packet rate is below @pkt_rate_low.
+ * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
+ *	a packet is sent, when the packet rate is below @pkt_rate_low.
+ * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
+ *	a TX interrupt, when the packet rate is below @pkt_rate_low.
+ * @pkt_rate_high: Threshold for high packet rate (packets per second).
+ * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
+ *	a packet arrives, when the packet rate is above @pkt_rate_high.
+ * @rx_max_coalesced_frames_high: Maximum number of packets to be received
+ *	before an RX interrupt, when the packet rate is above @pkt_rate_high.
+ * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
+ *	a packet is sent, when the packet rate is above @pkt_rate_high.
+ * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
+ *	a TX interrupt, when the packet rate is above @pkt_rate_high.
+ * @rate_sample_interval: How often to do adaptive coalescing packet rate
+ *	sampling, measured in seconds.  Must not be zero.
+ *
+ * Each pair of (usecs, max_frames) fields specifies this exit
+ * condition for interrupt coalescing:
+ *	(usecs > 0 && time_since_first_completion >= usecs) ||
+ *	(max_frames > 0 && completed_frames >= max_frames)
+ * It is illegal to set both usecs and max_frames to zero as this
+ * would cause interrupts to never be generated.  To disable
+ * coalescing, set usecs = 0 and max_frames = 1.
+ *
+ * Some implementations ignore the value of max_frames and use the
+ * condition:
+ *	time_since_first_completion >= usecs
+ * This is deprecated.  Drivers for hardware that does not support
+ * counting completions should validate that max_frames == !rx_usecs.
+ *
+ * Adaptive RX/TX coalescing is an algorithm implemented by some
+ * drivers to improve latency under low packet rates and improve
+ * throughput under high packet rates.  Some drivers only implement
+ * one of RX or TX adaptive coalescing.  Anything not implemented by
+ * the driver causes these values to be silently ignored.
+ *
+ * When the packet rate is below @pkt_rate_high but above
+ * @pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+struct ethtool_coalesce {
+	__u32	cmd;
+	__u32	rx_coalesce_usecs;
+	__u32	rx_max_coalesced_frames;
+	__u32	rx_coalesce_usecs_irq;
+	__u32	rx_max_coalesced_frames_irq;
+	__u32	tx_coalesce_usecs;
+	__u32	tx_max_coalesced_frames;
+	__u32	tx_coalesce_usecs_irq;
+	__u32	tx_max_coalesced_frames_irq;
+	__u32	stats_block_coalesce_usecs;
+	__u32	use_adaptive_rx_coalesce;
+	__u32	use_adaptive_tx_coalesce;
+	__u32	pkt_rate_low;
+	__u32	rx_coalesce_usecs_low;
+	__u32	rx_max_coalesced_frames_low;
+	__u32	tx_coalesce_usecs_low;
+	__u32	tx_max_coalesced_frames_low;
+	__u32	pkt_rate_high;
+	__u32	rx_coalesce_usecs_high;
+	__u32	rx_max_coalesced_frames_high;
+	__u32	tx_coalesce_usecs_high;
+	__u32	tx_max_coalesced_frames_high;
+	__u32	rate_sample_interval;
+};
+
+/* for configuring RX/TX ring parameters */
+struct ethtool_ringparam {
+	__u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
+
+	/* Read only attributes.  These indicate the maximum number
+	 * of pending RX/TX ring entries the driver will allow the
+	 * user to set.
+	 */
+	__u32	rx_max_pending;
+	__u32	rx_mini_max_pending;
+	__u32	rx_jumbo_max_pending;
+	__u32	tx_max_pending;
+
+	/* Values changeable by the user.  The valid values are
+	 * in the range 1 to the "*_max_pending" counterpart above.
+	 */
+	__u32	rx_pending;
+	__u32	rx_mini_pending;
+	__u32	rx_jumbo_pending;
+	__u32	tx_pending;
+};
+
+/**
+ * struct ethtool_channels - configuring number of network channel
+ * @cmd: ETHTOOL_{G,S}CHANNELS
+ * @max_rx: Read only. Maximum number of receive channel the driver support.
+ * @max_tx: Read only. Maximum number of transmit channel the driver support.
+ * @max_other: Read only. Maximum number of other channel the driver support.
+ * @max_combined: Read only. Maximum number of combined channel the driver
+ *	support. Set of queues RX, TX or other.
+ * @rx_count: Valid values are in the range 1 to the max_rx.
+ * @tx_count: Valid values are in the range 1 to the max_tx.
+ * @other_count: Valid values are in the range 1 to the max_other.
+ * @combined_count: Valid values are in the range 1 to the max_combined.
+ *
+ * This can be used to configure RX, TX and other channels.
+ */
+
+struct ethtool_channels {
+	__u32	cmd;
+	__u32	max_rx;
+	__u32	max_tx;
+	__u32	max_other;
+	__u32	max_combined;
+	__u32	rx_count;
+	__u32	tx_count;
+	__u32	other_count;
+	__u32	combined_count;
+};
+
+/* for configuring link flow control parameters */
+struct ethtool_pauseparam {
+	__u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
+
+	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
+	 * being true) the user may set 'autoneg' here non-zero to have the
+	 * pause parameters be auto-negotiated too.  In such a case, the
+	 * {rx,tx}_pause values below determine what capabilities are
+	 * advertised.
+	 *
+	 * If 'autoneg' is zero or the link is not being auto-negotiated,
+	 * then {rx,tx}_pause force the driver to use/not-use pause
+	 * flow control.
+	 */
+	__u32	autoneg;
+	__u32	rx_pause;
+	__u32	tx_pause;
+};
+
+#define ETH_GSTRING_LEN		32
+enum ethtool_stringset {
+	ETH_SS_TEST		= 0,
+	ETH_SS_STATS,
+	ETH_SS_PRIV_FLAGS,
+	ETH_SS_NTUPLE_FILTERS,	/* Do not use, GRXNTUPLE is now deprecated */
+	ETH_SS_FEATURES,
+};
+
+/* for passing string sets for data tagging */
+struct ethtool_gstrings {
+	__u32	cmd;		/* ETHTOOL_GSTRINGS */
+	__u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/
+	__u32	len;		/* number of strings in the string set */
+	__u8	data[0];
+};
+
+struct ethtool_sset_info {
+	__u32	cmd;		/* ETHTOOL_GSSET_INFO */
+	__u32	reserved;
+	__u64	sset_mask;	/* input: each bit selects an sset to query */
+				/* output: each bit a returned sset */
+	__u32	data[0];	/* ETH_SS_xxx count, in order, based on bits
+				   in sset_mask.  One bit implies one
+				   __u32, two bits implies two
+				   __u32's, etc. */
+};
+
+/**
+ * enum ethtool_test_flags - flags definition of ethtool_test
+ * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
+ *	only online tests.
+ * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
+ * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
+ *	test.
+ * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
+ */
+
+enum ethtool_test_flags {
+	ETH_TEST_FL_OFFLINE	= (1 << 0),
+	ETH_TEST_FL_FAILED	= (1 << 1),
+	ETH_TEST_FL_EXTERNAL_LB	= (1 << 2),
+	ETH_TEST_FL_EXTERNAL_LB_DONE	= (1 << 3),
+};
+
+/* for requesting NIC test and getting results*/
+struct ethtool_test {
+	__u32	cmd;		/* ETHTOOL_TEST */
+	__u32	flags;		/* ETH_TEST_FL_xxx */
+	__u32	reserved;
+	__u32	len;		/* result length, in number of u64 elements */
+	__u64	data[0];
+};
+
+/* for dumping NIC-specific statistics */
+struct ethtool_stats {
+	__u32	cmd;		/* ETHTOOL_GSTATS */
+	__u32	n_stats;	/* number of u64's being returned */
+	__u64	data[0];
+};
+
+struct ethtool_perm_addr {
+	__u32	cmd;		/* ETHTOOL_GPERMADDR */
+	__u32	size;
+	__u8	data[0];
+};
+
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present.  When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+	ETH_FLAG_TXVLAN		= (1 << 7),	/* TX VLAN offload enabled */
+	ETH_FLAG_RXVLAN		= (1 << 8),	/* RX VLAN offload enabled */
+	ETH_FLAG_LRO		= (1 << 15),	/* LRO is enabled */
+	ETH_FLAG_NTUPLE		= (1 << 27),	/* N-tuple filters enabled */
+	ETH_FLAG_RXHASH		= (1 << 28),
+};
+
+/* The following structures are for supporting RX network flow
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
+ */
+struct ethtool_tcpip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be16	psrc;
+	__be16	pdst;
+	__u8    tos;
+};
+
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
+struct ethtool_ah_espip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	spi;
+	__u8    tos;
+};
+
+#define	ETH_RX_NFC_IP4	1
+
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
+struct ethtool_usrip4_spec {
+	__be32	ip4src;
+	__be32	ip4dst;
+	__be32	l4_4_bytes;
+	__u8    tos;
+	__u8    ip_ver;
+	__u8    proto;
+};
+
+union ethtool_flow_union {
+	struct ethtool_tcpip4_spec		tcp_ip4_spec;
+	struct ethtool_tcpip4_spec		udp_ip4_spec;
+	struct ethtool_tcpip4_spec		sctp_ip4_spec;
+	struct ethtool_ah_espip4_spec		ah_ip4_spec;
+	struct ethtool_ah_espip4_spec		esp_ip4_spec;
+	struct ethtool_usrip4_spec		usr_ip4_spec;
+	struct ethhdr				ether_spec;
+	__u8					hdata[60];
+};
+
+struct ethtool_flow_ext {
+	__be16	vlan_etype;
+	__be16	vlan_tci;
+	__be32	data[2];
+};
+
+/**
+ * struct ethtool_rx_flow_spec - classification rule for RX flows
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow fields to match (dependent on @flow_type)
+ * @h_ext: Additional fields to match
+ * @m_u: Masks for flow field bits to be matched
+ * @m_ext: Masks for additional field bits to be matched
+ *	Note, all additional fields must be ignored unless @flow_type
+ *	includes the %FLOW_EXT flag.
+ * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
+ *	if packets should be discarded
+ * @location: Location of rule in the table.  Locations must be
+ *	numbered such that a flow matching multiple rules will be
+ *	classified according to the first (lowest numbered) rule.
+ */
+struct ethtool_rx_flow_spec {
+	__u32		flow_type;
+	union ethtool_flow_union h_u;
+	struct ethtool_flow_ext h_ext;
+	union ethtool_flow_union m_u;
+	struct ethtool_flow_ext m_ext;
+	__u64		ring_cookie;
+	__u32		location;
+};
+
+/**
+ * struct ethtool_rxnfc - command to get or set RX flow classification rules
+ * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
+ *	%ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
+ *	%ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
+ * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
+ * @data: Command-dependent value
+ * @fs: Flow classification rule
+ * @rule_cnt: Number of rules to be affected
+ * @rule_locs: Array of used rule locations
+ *
+ * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
+ * the fields included in the flow hash, e.g. %RXH_IP_SRC.  The following
+ * structure fields must not be used.
+ *
+ * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
+ * on return.
+ *
+ * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
+ * rules on return.  If @data is non-zero on return then it is the
+ * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
+ * driver supports any special location values.  If that flag is not
+ * set in @data then special location values should not be used.
+ *
+ * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
+ * existing rule on entry and @fs contains the rule on return.
+ *
+ * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
+ * user buffer for @rule_locs on entry.  On return, @data is the size
+ * of the rule table, @rule_cnt is the number of defined rules, and
+ * @rule_locs contains the locations of the defined rules.  Drivers
+ * must use the second parameter to get_rxnfc() instead of @rule_locs.
+ *
+ * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
+ * @fs.@location either specifies the location to use or is a special
+ * location value with %RX_CLS_LOC_SPECIAL flag set.  On return,
+ * @fs.@location is the actual rule location.
+ *
+ * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
+ * existing rule on entry.
+ *
+ * A driver supporting the special location values for
+ * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
+ * location, and may remove a rule at a later location (lower
+ * priority) that matches exactly the same set of flows.  The special
+ * values are: %RX_CLS_LOC_ANY, selecting any location;
+ * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
+ * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
+ * location (minimum priority).  Additional special values may be
+ * defined in future and drivers must return -%EINVAL for any
+ * unrecognised value.
+ */
+struct ethtool_rxnfc {
+	__u32				cmd;
+	__u32				flow_type;
+	__u64				data;
+	struct ethtool_rx_flow_spec	fs;
+	__u32				rule_cnt;
+	__u32				rule_locs[0];
+};
+
+
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer, which may be zero.
+ *	On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
+ *	indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ *
+ * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
+ * should be returned.  For %ETHTOOL_SRXFHINDIR, a @size of zero means
+ * the table should be reset to default values.  This last feature
+ * is not supported by the original implementations.
+ */
+struct ethtool_rxfh_indir {
+	__u32	cmd;
+	__u32	size;
+	__u32	ring_index[0];
+};
+
+/**
+ * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
+ * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
+ * @h_u: Flow field values to match (dependent on @flow_type)
+ * @m_u: Masks for flow field value bits to be ignored
+ * @vlan_tag: VLAN tag to match
+ * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
+ * @data: Driver-dependent data to match
+ * @data_mask: Mask for driver-dependent data bits to be ignored
+ * @action: RX ring/queue index to deliver to (non-negative) or other action
+ *	(negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
+ *
+ * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
+ * a field value and mask are both zero this is treated as if all mask
+ * bits are set i.e. the field is ignored.
+ */
+struct ethtool_rx_ntuple_flow_spec {
+	__u32		 flow_type;
+	union {
+		struct ethtool_tcpip4_spec		tcp_ip4_spec;
+		struct ethtool_tcpip4_spec		udp_ip4_spec;
+		struct ethtool_tcpip4_spec		sctp_ip4_spec;
+		struct ethtool_ah_espip4_spec		ah_ip4_spec;
+		struct ethtool_ah_espip4_spec		esp_ip4_spec;
+		struct ethtool_usrip4_spec		usr_ip4_spec;
+		struct ethhdr				ether_spec;
+		__u8					hdata[72];
+	} h_u, m_u;
+
+	__u16	        vlan_tag;
+	__u16	        vlan_tag_mask;
+	__u64		data;
+	__u64		data_mask;
+
+	__s32		action;
+#define ETHTOOL_RXNTUPLE_ACTION_DROP	(-1)	/* drop packet */
+#define ETHTOOL_RXNTUPLE_ACTION_CLEAR	(-2)	/* clear filter */
+};
+
+/**
+ * struct ethtool_rx_ntuple - command to set or clear RX flow filter
+ * @cmd: Command number - %ETHTOOL_SRXNTUPLE
+ * @fs: Flow filter specification
+ */
+struct ethtool_rx_ntuple {
+	__u32					cmd;
+	struct ethtool_rx_ntuple_flow_spec	fs;
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME	128
+enum ethtool_flash_op_type {
+	ETHTOOL_FLASH_ALL_REGIONS	= 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+	__u32	cmd;
+	__u32	region;
+	char	data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
+/**
+ * struct ethtool_dump - used for retrieving, setting device dump
+ * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
+ * 	%ETHTOOL_SET_DUMP
+ * @version: FW version of the dump, filled in by driver
+ * @flag: driver dependent flag for dump setting, filled in by driver during
+ *        get and filled in by ethtool for set operation.
+ *        flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
+ *        firmware dump is disabled.
+ * @len: length of dump data, used as the length of the user buffer on entry to
+ * 	 %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
+ * 	 for %ETHTOOL_GET_DUMP_FLAG command
+ * @data: data collected for get dump data operation
+ */
+
+#define ETH_FW_DUMP_DISABLE 0
+
+struct ethtool_dump {
+	__u32	cmd;
+	__u32	version;
+	__u32	flag;
+	__u32	len;
+	__u8	data[0];
+};
+
+/* for returning and changing feature sets */
+
+/**
+ * struct ethtool_get_features_block - block with state of 32 features
+ * @available: mask of changeable features
+ * @requested: mask of features requested to be enabled if possible
+ * @active: mask of currently enabled features
+ * @never_changed: mask of features not changeable for any device
+ */
+struct ethtool_get_features_block {
+	__u32	available;
+	__u32	requested;
+	__u32	active;
+	__u32	never_changed;
+};
+
+/**
+ * struct ethtool_gfeatures - command to get state of device's features
+ * @cmd: command number = %ETHTOOL_GFEATURES
+ * @size: in: number of elements in the features[] array;
+ *       out: number of elements in features[] needed to hold all features
+ * @features: state of features
+ */
+struct ethtool_gfeatures {
+	__u32	cmd;
+	__u32	size;
+	struct ethtool_get_features_block features[0];
+};
+
+/**
+ * struct ethtool_set_features_block - block with request for 32 features
+ * @valid: mask of features to be changed
+ * @requested: values of features to be changed
+ */
+struct ethtool_set_features_block {
+	__u32	valid;
+	__u32	requested;
+};
+
+/**
+ * struct ethtool_sfeatures - command to request change in device's features
+ * @cmd: command number = %ETHTOOL_SFEATURES
+ * @size: array size of the features[] array
+ * @features: feature change masks
+ */
+struct ethtool_sfeatures {
+	__u32	cmd;
+	__u32	size;
+	struct ethtool_set_features_block features[0];
+};
+
+/**
+ * struct ethtool_ts_info - holds a device's timestamping and PHC association
+ * @cmd: command number = %ETHTOOL_GET_TS_INFO
+ * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
+ * @phc_index: device index of the associated PHC, or -1 if there is none
+ * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
+ * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
+ *
+ * The bits in the 'tx_types' and 'rx_filters' fields correspond to
+ * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
+ * respectively.  For example, if the device supports HWTSTAMP_TX_ON,
+ * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
+ */
+struct ethtool_ts_info {
+	__u32	cmd;
+	__u32	so_timestamping;
+	__s32	phc_index;
+	__u32	tx_types;
+	__u32	tx_reserved[3];
+	__u32	rx_filters;
+	__u32	rx_reserved[3];
+};
+
+/*
+ * %ETHTOOL_SFEATURES changes features present in features[].valid to the
+ * values of corresponding bits in features[].requested. Bits in .requested
+ * not set in .valid or not changeable are ignored.
+ *
+ * Returns %EINVAL when .valid contains undefined or never-changeable bits
+ * or size is not equal to required number of features words (32-bit blocks).
+ * Returns >= 0 if request was completed; bits set in the value mean:
+ *   %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
+ *	changeable (not present in %ETHTOOL_GFEATURES' features[].available)
+ *	those bits were ignored.
+ *   %ETHTOOL_F_WISH - some or all changes requested were recorded but the
+ *      resulting state of bits masked by .valid is not equal to .requested.
+ *      Probably there are other device-specific constraints on some features
+ *      in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
+ *      here as though ignored bits were cleared.
+ *   %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
+ *      compatibility functions. Requested offload state cannot be properly
+ *      managed by kernel.
+ *
+ * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
+ * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
+ * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
+ * significant bit in features[0] fields. Empty strings mark undefined features.
+ */
+enum ethtool_sfeatures_retval_bits {
+	ETHTOOL_F_UNSUPPORTED__BIT,
+	ETHTOOL_F_WISH__BIT,
+	ETHTOOL_F_COMPAT__BIT,
+};
+
+#define ETHTOOL_F_UNSUPPORTED   (1 << ETHTOOL_F_UNSUPPORTED__BIT)
+#define ETHTOOL_F_WISH          (1 << ETHTOOL_F_WISH__BIT)
+#define ETHTOOL_F_COMPAT        (1 << ETHTOOL_F_COMPAT__BIT)
+
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET		0x00000001 /* Get settings. */
+#define ETHTOOL_SSET		0x00000002 /* Set settings. */
+#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value). */
+#define ETHTOOL_GLINK		0x0000000a
+#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
+					    * (ethtool_value) */
+#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
+					    * (ethtool_value). */
+#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR	0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO		0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO		0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO		0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO		0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS		0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS		0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS		0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS		0x00000028 /* Set driver-private flags bitmap */
+
+#define ETHTOOL_GRXFH		0x00000029 /* Get RX flow hash configuration */
+#define ETHTOOL_SRXFH		0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO		0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO		0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS	0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT	0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE	0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL	0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET		0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE	0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE	0x00000036 /* deprecated */
+#define ETHTOOL_GSSET_INFO	0x00000037 /* Get string set info */
+#define ETHTOOL_GRXFHINDIR	0x00000038 /* Get RX flow hash indir'n table */
+#define ETHTOOL_SRXFHINDIR	0x00000039 /* Set RX flow hash indir'n table */
+
+#define ETHTOOL_GFEATURES	0x0000003a /* Get device offload settings */
+#define ETHTOOL_SFEATURES	0x0000003b /* Change device offload settings */
+#define ETHTOOL_GCHANNELS	0x0000003c /* Get no of channels */
+#define ETHTOOL_SCHANNELS	0x0000003d /* Set no of channels */
+#define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
+#define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
+#define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
+#define ETHTOOL_GET_TS_INFO	0x00000041 /* Get time stamping and PHC info */
+#define ETHTOOL_GMODULEINFO	0x00000042 /* Get plug-in module information */
+#define ETHTOOL_GMODULEEEPROM	0x00000043 /* Get plug-in module eeprom */
+#define ETHTOOL_GEEE		0x00000044 /* Get EEE settings */
+#define ETHTOOL_SEEE		0x00000045 /* Set EEE settings */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET		ETHTOOL_GSET
+#define SPARC_ETH_SSET		ETHTOOL_SSET
+
+/* Indicates what features are supported by the interface. */
+#define SUPPORTED_10baseT_Half		(1 << 0)
+#define SUPPORTED_10baseT_Full		(1 << 1)
+#define SUPPORTED_100baseT_Half		(1 << 2)
+#define SUPPORTED_100baseT_Full		(1 << 3)
+#define SUPPORTED_1000baseT_Half	(1 << 4)
+#define SUPPORTED_1000baseT_Full	(1 << 5)
+#define SUPPORTED_Autoneg		(1 << 6)
+#define SUPPORTED_TP			(1 << 7)
+#define SUPPORTED_AUI			(1 << 8)
+#define SUPPORTED_MII			(1 << 9)
+#define SUPPORTED_FIBRE			(1 << 10)
+#define SUPPORTED_BNC			(1 << 11)
+#define SUPPORTED_10000baseT_Full	(1 << 12)
+#define SUPPORTED_Pause			(1 << 13)
+#define SUPPORTED_Asym_Pause		(1 << 14)
+#define SUPPORTED_2500baseX_Full	(1 << 15)
+#define SUPPORTED_Backplane		(1 << 16)
+#define SUPPORTED_1000baseKX_Full	(1 << 17)
+#define SUPPORTED_10000baseKX4_Full	(1 << 18)
+#define SUPPORTED_10000baseKR_Full	(1 << 19)
+#define SUPPORTED_10000baseR_FEC	(1 << 20)
+#define SUPPORTED_20000baseMLD2_Full	(1 << 21)
+#define SUPPORTED_20000baseKR2_Full	(1 << 22)
+#define SUPPORTED_40000baseKR4_Full	(1 << 23)
+#define SUPPORTED_40000baseCR4_Full	(1 << 24)
+#define SUPPORTED_40000baseSR4_Full	(1 << 25)
+#define SUPPORTED_40000baseLR4_Full	(1 << 26)
+
+/* Indicates what features are advertised by the interface. */
+#define ADVERTISED_10baseT_Half		(1 << 0)
+#define ADVERTISED_10baseT_Full		(1 << 1)
+#define ADVERTISED_100baseT_Half	(1 << 2)
+#define ADVERTISED_100baseT_Full	(1 << 3)
+#define ADVERTISED_1000baseT_Half	(1 << 4)
+#define ADVERTISED_1000baseT_Full	(1 << 5)
+#define ADVERTISED_Autoneg		(1 << 6)
+#define ADVERTISED_TP			(1 << 7)
+#define ADVERTISED_AUI			(1 << 8)
+#define ADVERTISED_MII			(1 << 9)
+#define ADVERTISED_FIBRE		(1 << 10)
+#define ADVERTISED_BNC			(1 << 11)
+#define ADVERTISED_10000baseT_Full	(1 << 12)
+#define ADVERTISED_Pause		(1 << 13)
+#define ADVERTISED_Asym_Pause		(1 << 14)
+#define ADVERTISED_2500baseX_Full	(1 << 15)
+#define ADVERTISED_Backplane		(1 << 16)
+#define ADVERTISED_1000baseKX_Full	(1 << 17)
+#define ADVERTISED_10000baseKX4_Full	(1 << 18)
+#define ADVERTISED_10000baseKR_Full	(1 << 19)
+#define ADVERTISED_10000baseR_FEC	(1 << 20)
+#define ADVERTISED_20000baseMLD2_Full	(1 << 21)
+#define ADVERTISED_20000baseKR2_Full	(1 << 22)
+#define ADVERTISED_40000baseKR4_Full	(1 << 23)
+#define ADVERTISED_40000baseCR4_Full	(1 << 24)
+#define ADVERTISED_40000baseSR4_Full	(1 << 25)
+#define ADVERTISED_40000baseLR4_Full	(1 << 26)
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things.  When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was forced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
+#define SPEED_10		10
+#define SPEED_100		100
+#define SPEED_1000		1000
+#define SPEED_2500		2500
+#define SPEED_10000		10000
+#define SPEED_UNKNOWN		-1
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF		0x00
+#define DUPLEX_FULL		0x01
+#define DUPLEX_UNKNOWN		0xff
+
+/* Which connector port. */
+#define PORT_TP			0x00
+#define PORT_AUI		0x01
+#define PORT_MII		0x02
+#define PORT_FIBRE		0x03
+#define PORT_BNC		0x04
+#define PORT_DA			0x05
+#define PORT_NONE		0xef
+#define PORT_OTHER		0xff
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL		0x00
+#define XCVR_EXTERNAL		0x01
+#define XCVR_DUMMY1		0x02
+#define XCVR_DUMMY2		0x03
+#define XCVR_DUMMY3		0x04
+
+/* Enable or disable autonegotiation.  If this is set to enable,
+ * the forced link modes above are completely ignored.
+ */
+#define AUTONEG_DISABLE		0x00
+#define AUTONEG_ENABLE		0x01
+
+/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
+ * the driver is required to renegotiate link
+ */
+#define ETH_TP_MDI_INVALID	0x00 /* status: unknown; control: unsupported */
+#define ETH_TP_MDI		0x01 /* status: MDI;     control: force MDI */
+#define ETH_TP_MDI_X		0x02 /* status: MDI-X;   control: force MDI-X */
+#define ETH_TP_MDI_AUTO		0x03 /*                  control: auto-select */
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY		(1 << 0)
+#define WAKE_UCAST		(1 << 1)
+#define WAKE_MCAST		(1 << 2)
+#define WAKE_BCAST		(1 << 3)
+#define WAKE_ARP		(1 << 4)
+#define WAKE_MAGIC		(1 << 5)
+#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
+
+/* L2-L4 network traffic flow types */
+#define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
+#define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
+#define	SCTP_V4_FLOW	0x03	/* hash or spec (sctp_ip4_spec) */
+#define	AH_ESP_V4_FLOW	0x04	/* hash only */
+#define	TCP_V6_FLOW	0x05	/* hash only */
+#define	UDP_V6_FLOW	0x06	/* hash only */
+#define	SCTP_V6_FLOW	0x07	/* hash only */
+#define	AH_ESP_V6_FLOW	0x08	/* hash only */
+#define	AH_V4_FLOW	0x09	/* hash or spec (ah_ip4_spec) */
+#define	ESP_V4_FLOW	0x0a	/* hash or spec (esp_ip4_spec) */
+#define	AH_V6_FLOW	0x0b	/* hash only */
+#define	ESP_V6_FLOW	0x0c	/* hash only */
+#define	IP_USER_FLOW	0x0d	/* spec only (usr_ip4_spec) */
+#define	IPV4_FLOW	0x10	/* hash only */
+#define	IPV6_FLOW	0x11	/* hash only */
+#define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
+/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
+#define	FLOW_EXT	0x80000000
+
+/* L3-L4 network traffic flow hash options */
+#define	RXH_L2DA	(1 << 1)
+#define	RXH_VLAN	(1 << 2)
+#define	RXH_L3_PROTO	(1 << 3)
+#define	RXH_IP_SRC	(1 << 4)
+#define	RXH_IP_DST	(1 << 5)
+#define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define	RXH_DISCARD	(1 << 31)
+
+#define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
+
+/* Special RX classification rule insert location values */
+#define RX_CLS_LOC_SPECIAL	0x80000000	/* flag */
+#define RX_CLS_LOC_ANY		0xffffffff
+#define RX_CLS_LOC_FIRST	0xfffffffe
+#define RX_CLS_LOC_LAST		0xfffffffd
+
+/* EEPROM Standards for plug in modules */
+#define ETH_MODULE_SFF_8079		0x1
+#define ETH_MODULE_SFF_8079_LEN		256
+#define ETH_MODULE_SFF_8472		0x2
+#define ETH_MODULE_SFF_8472_LEN		512
+
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset.  On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently.  The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+	/* These flags represent components dedicated to the interface
+	 * the command is addressed to.  Shift any flag left by
+	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+	 * same type.
+	 */
+	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
+	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
+	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
+	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
+	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
+	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
+	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
+	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
+						 * multiple components */
+
+	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
+						 * this interface */
+	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
+						 * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT	16
+
+#endif /* _UAPI_LINUX_ETHTOOL_H */
diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h
new file mode 100644
index 0000000..8c99ce7
--- /dev/null
+++ b/include/uapi/linux/eventpoll.h
@@ -0,0 +1,66 @@
+/*
+ *  include/linux/eventpoll.h ( Efficient event polling implementation )
+ *  Copyright (C) 2001,...,2006	 Davide Libenzi
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _UAPI_LINUX_EVENTPOLL_H
+#define _UAPI_LINUX_EVENTPOLL_H
+
+/* For O_CLOEXEC */
+#include <linux/fcntl.h>
+#include <linux/types.h>
+
+/* Flags for epoll_create1.  */
+#define EPOLL_CLOEXEC O_CLOEXEC
+
+/* Valid opcodes to issue to sys_epoll_ctl() */
+#define EPOLL_CTL_ADD 1
+#define EPOLL_CTL_DEL 2
+#define EPOLL_CTL_MOD 3
+#define EPOLL_CTL_DISABLE 4
+
+/*
+ * Request the handling of system wakeup events so as to prevent system suspends
+ * from happening while those events are being processed.
+ *
+ * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be
+ * re-allowed until epoll_wait is called again after consuming the wakeup
+ * event(s).
+ *
+ * Requires CAP_BLOCK_SUSPEND
+ */
+#define EPOLLWAKEUP (1 << 29)
+
+/* Set the One Shot behaviour for the target file descriptor */
+#define EPOLLONESHOT (1 << 30)
+
+/* Set the Edge Triggered behaviour for the target file descriptor */
+#define EPOLLET (1 << 31)
+
+/* 
+ * On x86-64 make the 64bit structure have the same alignment as the
+ * 32bit structure. This makes 32bit emulation easier.
+ *
+ * UML/x86_64 needs the same packing as x86_64
+ */
+#ifdef __x86_64__
+#define EPOLL_PACKED __attribute__((packed))
+#else
+#define EPOLL_PACKED
+#endif
+
+struct epoll_event {
+	__u32 events;
+	__u64 data;
+} EPOLL_PACKED;
+
+
+#endif /* _UAPI_LINUX_EVENTPOLL_H */
diff --git a/include/linux/fadvise.h b/include/uapi/linux/fadvise.h
similarity index 100%
rename from include/linux/fadvise.h
rename to include/uapi/linux/fadvise.h
diff --git a/include/uapi/linux/falloc.h b/include/uapi/linux/falloc.h
new file mode 100644
index 0000000..990c4cc
--- /dev/null
+++ b/include/uapi/linux/falloc.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI_FALLOC_H_
+#define _UAPI_FALLOC_H_
+
+#define FALLOC_FL_KEEP_SIZE	0x01 /* default is extend size */
+#define FALLOC_FL_PUNCH_HOLE	0x02 /* de-allocates range */
+#define FALLOC_FL_NO_HIDE_STALE	0x04 /* reserved codepoint */
+
+
+#endif /* _UAPI_FALLOC_H_ */
diff --git a/include/uapi/linux/fanotify.h b/include/uapi/linux/fanotify.h
new file mode 100644
index 0000000..030508d
--- /dev/null
+++ b/include/uapi/linux/fanotify.h
@@ -0,0 +1,116 @@
+#ifndef _UAPI_LINUX_FANOTIFY_H
+#define _UAPI_LINUX_FANOTIFY_H
+
+#include <linux/types.h>
+
+/* the following events that user-space can register for */
+#define FAN_ACCESS		0x00000001	/* File was accessed */
+#define FAN_MODIFY		0x00000002	/* File was modified */
+#define FAN_CLOSE_WRITE		0x00000008	/* Writtable file closed */
+#define FAN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
+#define FAN_OPEN		0x00000020	/* File was opened */
+
+#define FAN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
+
+#define FAN_OPEN_PERM		0x00010000	/* File open in perm check */
+#define FAN_ACCESS_PERM		0x00020000	/* File accessed in perm check */
+
+#define FAN_ONDIR		0x40000000	/* event occurred against dir */
+
+#define FAN_EVENT_ON_CHILD	0x08000000	/* interested in child events */
+
+/* helper events */
+#define FAN_CLOSE		(FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */
+
+/* flags used for fanotify_init() */
+#define FAN_CLOEXEC		0x00000001
+#define FAN_NONBLOCK		0x00000002
+
+/* These are NOT bitwise flags.  Both bits are used togther.  */
+#define FAN_CLASS_NOTIF		0x00000000
+#define FAN_CLASS_CONTENT	0x00000004
+#define FAN_CLASS_PRE_CONTENT	0x00000008
+#define FAN_ALL_CLASS_BITS	(FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \
+				 FAN_CLASS_PRE_CONTENT)
+
+#define FAN_UNLIMITED_QUEUE	0x00000010
+#define FAN_UNLIMITED_MARKS	0x00000020
+
+#define FAN_ALL_INIT_FLAGS	(FAN_CLOEXEC | FAN_NONBLOCK | \
+				 FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\
+				 FAN_UNLIMITED_MARKS)
+
+/* flags used for fanotify_modify_mark() */
+#define FAN_MARK_ADD		0x00000001
+#define FAN_MARK_REMOVE		0x00000002
+#define FAN_MARK_DONT_FOLLOW	0x00000004
+#define FAN_MARK_ONLYDIR	0x00000008
+#define FAN_MARK_MOUNT		0x00000010
+#define FAN_MARK_IGNORED_MASK	0x00000020
+#define FAN_MARK_IGNORED_SURV_MODIFY	0x00000040
+#define FAN_MARK_FLUSH		0x00000080
+
+#define FAN_ALL_MARK_FLAGS	(FAN_MARK_ADD |\
+				 FAN_MARK_REMOVE |\
+				 FAN_MARK_DONT_FOLLOW |\
+				 FAN_MARK_ONLYDIR |\
+				 FAN_MARK_MOUNT |\
+				 FAN_MARK_IGNORED_MASK |\
+				 FAN_MARK_IGNORED_SURV_MODIFY |\
+				 FAN_MARK_FLUSH)
+
+/*
+ * All of the events - we build the list by hand so that we can add flags in
+ * the future and not break backward compatibility.  Apps will get only the
+ * events that they originally wanted.  Be sure to add new events here!
+ */
+#define FAN_ALL_EVENTS (FAN_ACCESS |\
+			FAN_MODIFY |\
+			FAN_CLOSE |\
+			FAN_OPEN)
+
+/*
+ * All events which require a permission response from userspace
+ */
+#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\
+			     FAN_ACCESS_PERM)
+
+#define FAN_ALL_OUTGOING_EVENTS	(FAN_ALL_EVENTS |\
+				 FAN_ALL_PERM_EVENTS |\
+				 FAN_Q_OVERFLOW)
+
+#define FANOTIFY_METADATA_VERSION	3
+
+struct fanotify_event_metadata {
+	__u32 event_len;
+	__u8 vers;
+	__u8 reserved;
+	__u16 metadata_len;
+	__aligned_u64 mask;
+	__s32 fd;
+	__s32 pid;
+};
+
+struct fanotify_response {
+	__s32 fd;
+	__u32 response;
+};
+
+/* Legit userspace responses to a _PERM event */
+#define FAN_ALLOW	0x01
+#define FAN_DENY	0x02
+/* No fd set in event */
+#define FAN_NOFD	-1
+
+/* Helper functions to deal with fanotify_event_metadata buffers */
+#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
+
+#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \
+				   (struct fanotify_event_metadata*)(((char *)(meta)) + \
+				   (meta)->event_len))
+
+#define FAN_EVENT_OK(meta, len)	((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \
+				(long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \
+				(long)(meta)->event_len <= (long)(len))
+
+#endif /* _UAPI_LINUX_FANOTIFY_H */
diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h
new file mode 100644
index 0000000..fb795c3
--- /dev/null
+++ b/include/uapi/linux/fb.h
@@ -0,0 +1,402 @@
+#ifndef _UAPI_LINUX_FB_H
+#define _UAPI_LINUX_FB_H
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/* Definitions of frame buffers						*/
+
+#define FB_MAX			32	/* sufficient for now */
+
+/* ioctls
+   0x46 is 'F'								*/
+#define FBIOGET_VSCREENINFO	0x4600
+#define FBIOPUT_VSCREENINFO	0x4601
+#define FBIOGET_FSCREENINFO	0x4602
+#define FBIOGETCMAP		0x4604
+#define FBIOPUTCMAP		0x4605
+#define FBIOPAN_DISPLAY		0x4606
+#ifndef __KERNEL__
+#define FBIO_CURSOR            _IOWR('F', 0x08, struct fb_cursor)
+#endif
+/* 0x4607-0x460B are defined below */
+/* #define FBIOGET_MONITORSPEC	0x460C */
+/* #define FBIOPUT_MONITORSPEC	0x460D */
+/* #define FBIOSWITCH_MONIBIT	0x460E */
+#define FBIOGET_CON2FBMAP	0x460F
+#define FBIOPUT_CON2FBMAP	0x4610
+#define FBIOBLANK		0x4611		/* arg: 0 or vesa level + 1 */
+#define FBIOGET_VBLANK		_IOR('F', 0x12, struct fb_vblank)
+#define FBIO_ALLOC              0x4613
+#define FBIO_FREE               0x4614
+#define FBIOGET_GLYPH           0x4615
+#define FBIOGET_HWCINFO         0x4616
+#define FBIOPUT_MODEINFO        0x4617
+#define FBIOGET_DISPINFO        0x4618
+#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, __u32)
+
+#define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
+#define FB_TYPE_PLANES			1	/* Non interleaved planes */
+#define FB_TYPE_INTERLEAVED_PLANES	2	/* Interleaved planes	*/
+#define FB_TYPE_TEXT			3	/* Text/attributes	*/
+#define FB_TYPE_VGA_PLANES		4	/* EGA/VGA planes	*/
+#define FB_TYPE_FOURCC			5	/* Type identified by a V4L2 FOURCC */
+
+#define FB_AUX_TEXT_MDA		0	/* Monochrome text */
+#define FB_AUX_TEXT_CGA		1	/* CGA/EGA/VGA Color text */
+#define FB_AUX_TEXT_S3_MMIO	2	/* S3 MMIO fasttext */
+#define FB_AUX_TEXT_MGA_STEP16	3	/* MGA Millenium I: text, attr, 14 reserved bytes */
+#define FB_AUX_TEXT_MGA_STEP8	4	/* other MGAs:      text, attr,  6 reserved bytes */
+#define FB_AUX_TEXT_SVGA_GROUP	8	/* 8-15: SVGA tileblit compatible modes */
+#define FB_AUX_TEXT_SVGA_MASK	7	/* lower three bits says step */
+#define FB_AUX_TEXT_SVGA_STEP2	8	/* SVGA text mode:  text, attr */
+#define FB_AUX_TEXT_SVGA_STEP4	9	/* SVGA text mode:  text, attr,  2 reserved bytes */
+#define FB_AUX_TEXT_SVGA_STEP8	10	/* SVGA text mode:  text, attr,  6 reserved bytes */
+#define FB_AUX_TEXT_SVGA_STEP16	11	/* SVGA text mode:  text, attr, 14 reserved bytes */
+#define FB_AUX_TEXT_SVGA_LAST	15	/* reserved up to 15 */
+
+#define FB_AUX_VGA_PLANES_VGA4		0	/* 16 color planes (EGA/VGA) */
+#define FB_AUX_VGA_PLANES_CFB4		1	/* CFB4 in planes (VGA) */
+#define FB_AUX_VGA_PLANES_CFB8		2	/* CFB8 in planes (VGA) */
+
+#define FB_VISUAL_MONO01		0	/* Monochr. 1=Black 0=White */
+#define FB_VISUAL_MONO10		1	/* Monochr. 1=White 0=Black */
+#define FB_VISUAL_TRUECOLOR		2	/* True color	*/
+#define FB_VISUAL_PSEUDOCOLOR		3	/* Pseudo color (like atari) */
+#define FB_VISUAL_DIRECTCOLOR		4	/* Direct color */
+#define FB_VISUAL_STATIC_PSEUDOCOLOR	5	/* Pseudo color readonly */
+#define FB_VISUAL_FOURCC		6	/* Visual identified by a V4L2 FOURCC */
+
+#define FB_ACCEL_NONE		0	/* no hardware accelerator	*/
+#define FB_ACCEL_ATARIBLITT	1	/* Atari Blitter		*/
+#define FB_ACCEL_AMIGABLITT	2	/* Amiga Blitter                */
+#define FB_ACCEL_S3_TRIO64	3	/* Cybervision64 (S3 Trio64)    */
+#define FB_ACCEL_NCR_77C32BLT	4	/* RetinaZ3 (NCR 77C32BLT)      */
+#define FB_ACCEL_S3_VIRGE	5	/* Cybervision64/3D (S3 ViRGE)	*/
+#define FB_ACCEL_ATI_MACH64GX	6	/* ATI Mach 64GX family		*/
+#define FB_ACCEL_DEC_TGA	7	/* DEC 21030 TGA		*/
+#define FB_ACCEL_ATI_MACH64CT	8	/* ATI Mach 64CT family		*/
+#define FB_ACCEL_ATI_MACH64VT	9	/* ATI Mach 64CT family VT class */
+#define FB_ACCEL_ATI_MACH64GT	10	/* ATI Mach 64CT family GT class */
+#define FB_ACCEL_SUN_CREATOR	11	/* Sun Creator/Creator3D	*/
+#define FB_ACCEL_SUN_CGSIX	12	/* Sun cg6			*/
+#define FB_ACCEL_SUN_LEO	13	/* Sun leo/zx			*/
+#define FB_ACCEL_IMS_TWINTURBO	14	/* IMS Twin Turbo		*/
+#define FB_ACCEL_3DLABS_PERMEDIA2 15	/* 3Dlabs Permedia 2		*/
+#define FB_ACCEL_MATROX_MGA2064W 16	/* Matrox MGA2064W (Millenium)	*/
+#define FB_ACCEL_MATROX_MGA1064SG 17	/* Matrox MGA1064SG (Mystique)	*/
+#define FB_ACCEL_MATROX_MGA2164W 18	/* Matrox MGA2164W (Millenium II) */
+#define FB_ACCEL_MATROX_MGA2164W_AGP 19	/* Matrox MGA2164W (Millenium II) */
+#define FB_ACCEL_MATROX_MGAG100	20	/* Matrox G100 (Productiva G100) */
+#define FB_ACCEL_MATROX_MGAG200	21	/* Matrox G200 (Myst, Mill, ...) */
+#define FB_ACCEL_SUN_CG14	22	/* Sun cgfourteen		 */
+#define FB_ACCEL_SUN_BWTWO	23	/* Sun bwtwo			*/
+#define FB_ACCEL_SUN_CGTHREE	24	/* Sun cgthree			*/
+#define FB_ACCEL_SUN_TCX	25	/* Sun tcx			*/
+#define FB_ACCEL_MATROX_MGAG400	26	/* Matrox G400			*/
+#define FB_ACCEL_NV3		27	/* nVidia RIVA 128              */
+#define FB_ACCEL_NV4		28	/* nVidia RIVA TNT		*/
+#define FB_ACCEL_NV5		29	/* nVidia RIVA TNT2		*/
+#define FB_ACCEL_CT_6555x	30	/* C&T 6555x			*/
+#define FB_ACCEL_3DFX_BANSHEE	31	/* 3Dfx Banshee			*/
+#define FB_ACCEL_ATI_RAGE128	32	/* ATI Rage128 family		*/
+#define FB_ACCEL_IGS_CYBER2000	33	/* CyberPro 2000		*/
+#define FB_ACCEL_IGS_CYBER2010	34	/* CyberPro 2010		*/
+#define FB_ACCEL_IGS_CYBER5000	35	/* CyberPro 5000		*/
+#define FB_ACCEL_SIS_GLAMOUR    36	/* SiS 300/630/540              */
+#define FB_ACCEL_3DLABS_PERMEDIA3 37	/* 3Dlabs Permedia 3		*/
+#define FB_ACCEL_ATI_RADEON	38	/* ATI Radeon family		*/
+#define FB_ACCEL_I810           39      /* Intel 810/815                */
+#define FB_ACCEL_SIS_GLAMOUR_2  40	/* SiS 315, 650, 740		*/
+#define FB_ACCEL_SIS_XABRE      41	/* SiS 330 ("Xabre")		*/
+#define FB_ACCEL_I830           42      /* Intel 830M/845G/85x/865G     */
+#define FB_ACCEL_NV_10          43      /* nVidia Arch 10               */
+#define FB_ACCEL_NV_20          44      /* nVidia Arch 20               */
+#define FB_ACCEL_NV_30          45      /* nVidia Arch 30               */
+#define FB_ACCEL_NV_40          46      /* nVidia Arch 40               */
+#define FB_ACCEL_XGI_VOLARI_V	47	/* XGI Volari V3XT, V5, V8      */
+#define FB_ACCEL_XGI_VOLARI_Z	48	/* XGI Volari Z7                */
+#define FB_ACCEL_OMAP1610	49	/* TI OMAP16xx                  */
+#define FB_ACCEL_TRIDENT_TGUI	50	/* Trident TGUI			*/
+#define FB_ACCEL_TRIDENT_3DIMAGE 51	/* Trident 3DImage		*/
+#define FB_ACCEL_TRIDENT_BLADE3D 52	/* Trident Blade3D		*/
+#define FB_ACCEL_TRIDENT_BLADEXP 53	/* Trident BladeXP		*/
+#define FB_ACCEL_CIRRUS_ALPINE   53	/* Cirrus Logic 543x/544x/5480	*/
+#define FB_ACCEL_NEOMAGIC_NM2070 90	/* NeoMagic NM2070              */
+#define FB_ACCEL_NEOMAGIC_NM2090 91	/* NeoMagic NM2090              */
+#define FB_ACCEL_NEOMAGIC_NM2093 92	/* NeoMagic NM2093              */
+#define FB_ACCEL_NEOMAGIC_NM2097 93	/* NeoMagic NM2097              */
+#define FB_ACCEL_NEOMAGIC_NM2160 94	/* NeoMagic NM2160              */
+#define FB_ACCEL_NEOMAGIC_NM2200 95	/* NeoMagic NM2200              */
+#define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
+#define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
+#define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
+#define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
+
+#define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
+#define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
+#define FB_ACCEL_SAVAGE3D_MV    0x82	/* S3 Savage3D-MV               */
+#define FB_ACCEL_SAVAGE2000     0x83	/* S3 Savage2000                */
+#define FB_ACCEL_SAVAGE_MX_MV   0x84	/* S3 Savage/MX-MV              */
+#define FB_ACCEL_SAVAGE_MX      0x85	/* S3 Savage/MX                 */
+#define FB_ACCEL_SAVAGE_IX_MV   0x86	/* S3 Savage/IX-MV              */
+#define FB_ACCEL_SAVAGE_IX      0x87	/* S3 Savage/IX                 */
+#define FB_ACCEL_PROSAVAGE_PM   0x88	/* S3 ProSavage PM133           */
+#define FB_ACCEL_PROSAVAGE_KM   0x89	/* S3 ProSavage KM133           */
+#define FB_ACCEL_S3TWISTER_P    0x8a	/* S3 Twister                   */
+#define FB_ACCEL_S3TWISTER_K    0x8b	/* S3 TwisterK                  */
+#define FB_ACCEL_SUPERSAVAGE    0x8c    /* S3 Supersavage               */
+#define FB_ACCEL_PROSAVAGE_DDR  0x8d	/* S3 ProSavage DDR             */
+#define FB_ACCEL_PROSAVAGE_DDRK 0x8e	/* S3 ProSavage DDR-K           */
+
+#define FB_ACCEL_PUV3_UNIGFX	0xa0	/* PKUnity-v3 Unigfx		*/
+
+#define FB_CAP_FOURCC		1	/* Device supports FOURCC-based formats */
+
+struct fb_fix_screeninfo {
+	char id[16];			/* identification string eg "TT Builtin" */
+	unsigned long smem_start;	/* Start of frame buffer mem */
+					/* (physical address) */
+	__u32 smem_len;			/* Length of frame buffer mem */
+	__u32 type;			/* see FB_TYPE_*		*/
+	__u32 type_aux;			/* Interleave for interleaved Planes */
+	__u32 visual;			/* see FB_VISUAL_*		*/ 
+	__u16 xpanstep;			/* zero if no hardware panning  */
+	__u16 ypanstep;			/* zero if no hardware panning  */
+	__u16 ywrapstep;		/* zero if no hardware ywrap    */
+	__u32 line_length;		/* length of a line in bytes    */
+	unsigned long mmio_start;	/* Start of Memory Mapped I/O   */
+					/* (physical address) */
+	__u32 mmio_len;			/* Length of Memory Mapped I/O  */
+	__u32 accel;			/* Indicate to driver which	*/
+					/*  specific chip/card we have	*/
+	__u16 capabilities;		/* see FB_CAP_*			*/
+	__u16 reserved[2];		/* Reserved for future compatibility */
+};
+
+/* Interpretation of offset for color fields: All offsets are from the right,
+ * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
+ * can use the offset as right argument to <<). A pixel afterwards is a bit
+ * stream and is written to video memory as that unmodified.
+ *
+ * For pseudocolor: offset and length should be the same for all color
+ * components. Offset specifies the position of the least significant bit
+ * of the pallette index in a pixel value. Length indicates the number
+ * of available palette entries (i.e. # of entries = 1 << length).
+ */
+struct fb_bitfield {
+	__u32 offset;			/* beginning of bitfield	*/
+	__u32 length;			/* length of bitfield		*/
+	__u32 msb_right;		/* != 0 : Most significant bit is */ 
+					/* right */ 
+};
+
+#define FB_NONSTD_HAM		1	/* Hold-And-Modify (HAM)        */
+#define FB_NONSTD_REV_PIX_IN_B	2	/* order of pixels in each byte is reversed */
+
+#define FB_ACTIVATE_NOW		0	/* set values immediately (or vbl)*/
+#define FB_ACTIVATE_NXTOPEN	1	/* activate on next open	*/
+#define FB_ACTIVATE_TEST	2	/* don't set, round up impossible */
+#define FB_ACTIVATE_MASK       15
+					/* values			*/
+#define FB_ACTIVATE_VBL	       16	/* activate values on next vbl  */
+#define FB_CHANGE_CMAP_VBL     32	/* change colormap on vbl	*/
+#define FB_ACTIVATE_ALL	       64	/* change all VCs on this fb	*/
+#define FB_ACTIVATE_FORCE     128	/* force apply even when no change*/
+#define FB_ACTIVATE_INV_MODE  256       /* invalidate videomode */
+
+#define FB_ACCELF_TEXT		1	/* (OBSOLETE) see fb_info.flags and vc_mode */
+
+#define FB_SYNC_HOR_HIGH_ACT	1	/* horizontal sync high active	*/
+#define FB_SYNC_VERT_HIGH_ACT	2	/* vertical sync high active	*/
+#define FB_SYNC_EXT		4	/* external sync		*/
+#define FB_SYNC_COMP_HIGH_ACT	8	/* composite sync high active   */
+#define FB_SYNC_BROADCAST	16	/* broadcast video timings      */
+					/* vtotal = 144d/288n/576i => PAL  */
+					/* vtotal = 121d/242n/484i => NTSC */
+#define FB_SYNC_ON_GREEN	32	/* sync on green */
+
+#define FB_VMODE_NONINTERLACED  0	/* non interlaced */
+#define FB_VMODE_INTERLACED	1	/* interlaced	*/
+#define FB_VMODE_DOUBLE		2	/* double scan */
+#define FB_VMODE_ODD_FLD_FIRST	4	/* interlaced: top line first */
+#define FB_VMODE_MASK		255
+
+#define FB_VMODE_YWRAP		256	/* ywrap instead of panning     */
+#define FB_VMODE_SMOOTH_XPAN	512	/* smooth xpan possible (internally used) */
+#define FB_VMODE_CONUPDATE	512	/* don't update x/yoffset	*/
+
+/*
+ * Display rotation support
+ */
+#define FB_ROTATE_UR      0
+#define FB_ROTATE_CW      1
+#define FB_ROTATE_UD      2
+#define FB_ROTATE_CCW     3
+
+#define PICOS2KHZ(a) (1000000000UL/(a))
+#define KHZ2PICOS(a) (1000000000UL/(a))
+
+struct fb_var_screeninfo {
+	__u32 xres;			/* visible resolution		*/
+	__u32 yres;
+	__u32 xres_virtual;		/* virtual resolution		*/
+	__u32 yres_virtual;
+	__u32 xoffset;			/* offset from virtual to visible */
+	__u32 yoffset;			/* resolution			*/
+
+	__u32 bits_per_pixel;		/* guess what			*/
+	__u32 grayscale;		/* 0 = color, 1 = grayscale,	*/
+					/* >1 = FOURCC			*/
+	struct fb_bitfield red;		/* bitfield in fb mem if true color, */
+	struct fb_bitfield green;	/* else only length is significant */
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;	/* transparency			*/	
+
+	__u32 nonstd;			/* != 0 Non standard pixel format */
+
+	__u32 activate;			/* see FB_ACTIVATE_*		*/
+
+	__u32 height;			/* height of picture in mm    */
+	__u32 width;			/* width of picture in mm     */
+
+	__u32 accel_flags;		/* (OBSOLETE) see fb_info.flags */
+
+	/* Timing: All values in pixclocks, except pixclock (of course) */
+	__u32 pixclock;			/* pixel clock in ps (pico seconds) */
+	__u32 left_margin;		/* time from sync to picture	*/
+	__u32 right_margin;		/* time from picture to sync	*/
+	__u32 upper_margin;		/* time from sync to picture	*/
+	__u32 lower_margin;
+	__u32 hsync_len;		/* length of horizontal sync	*/
+	__u32 vsync_len;		/* length of vertical sync	*/
+	__u32 sync;			/* see FB_SYNC_*		*/
+	__u32 vmode;			/* see FB_VMODE_*		*/
+	__u32 rotate;			/* angle we rotate counter clockwise */
+	__u32 colorspace;		/* colorspace for FOURCC-based modes */
+	__u32 reserved[4];		/* Reserved for future compatibility */
+};
+
+struct fb_cmap {
+	__u32 start;			/* First entry	*/
+	__u32 len;			/* Number of entries */
+	__u16 *red;			/* Red values	*/
+	__u16 *green;
+	__u16 *blue;
+	__u16 *transp;			/* transparency, can be NULL */
+};
+
+struct fb_con2fbmap {
+	__u32 console;
+	__u32 framebuffer;
+};
+
+/* VESA Blanking Levels */
+#define VESA_NO_BLANKING        0
+#define VESA_VSYNC_SUSPEND      1
+#define VESA_HSYNC_SUSPEND      2
+#define VESA_POWERDOWN          3
+
+
+enum {
+	/* screen: unblanked, hsync: on,  vsync: on */
+	FB_BLANK_UNBLANK       = VESA_NO_BLANKING,
+
+	/* screen: blanked,   hsync: on,  vsync: on */
+	FB_BLANK_NORMAL        = VESA_NO_BLANKING + 1,
+
+	/* screen: blanked,   hsync: on,  vsync: off */
+	FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1,
+
+	/* screen: blanked,   hsync: off, vsync: on */
+	FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1,
+
+	/* screen: blanked,   hsync: off, vsync: off */
+	FB_BLANK_POWERDOWN     = VESA_POWERDOWN + 1
+};
+
+#define FB_VBLANK_VBLANKING	0x001	/* currently in a vertical blank */
+#define FB_VBLANK_HBLANKING	0x002	/* currently in a horizontal blank */
+#define FB_VBLANK_HAVE_VBLANK	0x004	/* vertical blanks can be detected */
+#define FB_VBLANK_HAVE_HBLANK	0x008	/* horizontal blanks can be detected */
+#define FB_VBLANK_HAVE_COUNT	0x010	/* global retrace counter is available */
+#define FB_VBLANK_HAVE_VCOUNT	0x020	/* the vcount field is valid */
+#define FB_VBLANK_HAVE_HCOUNT	0x040	/* the hcount field is valid */
+#define FB_VBLANK_VSYNCING	0x080	/* currently in a vsync */
+#define FB_VBLANK_HAVE_VSYNC	0x100	/* verical syncs can be detected */
+
+struct fb_vblank {
+	__u32 flags;			/* FB_VBLANK flags */
+	__u32 count;			/* counter of retraces since boot */
+	__u32 vcount;			/* current scanline position */
+	__u32 hcount;			/* current scandot position */
+	__u32 reserved[4];		/* reserved for future compatibility */
+};
+
+/* Internal HW accel */
+#define ROP_COPY 0
+#define ROP_XOR  1
+
+struct fb_copyarea {
+	__u32 dx;
+	__u32 dy;
+	__u32 width;
+	__u32 height;
+	__u32 sx;
+	__u32 sy;
+};
+
+struct fb_fillrect {
+	__u32 dx;	/* screen-relative */
+	__u32 dy;
+	__u32 width;
+	__u32 height;
+	__u32 color;
+	__u32 rop;
+};
+
+struct fb_image {
+	__u32 dx;		/* Where to place image */
+	__u32 dy;
+	__u32 width;		/* Size of image */
+	__u32 height;
+	__u32 fg_color;		/* Only used when a mono bitmap */
+	__u32 bg_color;
+	__u8  depth;		/* Depth of the image */
+	const char *data;	/* Pointer to image data */
+	struct fb_cmap cmap;	/* color map info */
+};
+
+/*
+ * hardware cursor control
+ */
+
+#define FB_CUR_SETIMAGE 0x01
+#define FB_CUR_SETPOS   0x02
+#define FB_CUR_SETHOT   0x04
+#define FB_CUR_SETCMAP  0x08
+#define FB_CUR_SETSHAPE 0x10
+#define FB_CUR_SETSIZE	0x20
+#define FB_CUR_SETALL   0xFF
+
+struct fbcurpos {
+	__u16 x, y;
+};
+
+struct fb_cursor {
+	__u16 set;		/* what to set */
+	__u16 enable;		/* cursor on/off */
+	__u16 rop;		/* bitop operation */
+	const char *mask;	/* cursor mask bits */
+	struct fbcurpos hot;	/* cursor hot spot */
+	struct fb_image	image;	/* Cursor image */
+};
+
+#ifdef CONFIG_FB_BACKLIGHT
+/* Settings for the generic backlight code */
+#define FB_BACKLIGHT_LEVELS	128
+#define FB_BACKLIGHT_MAX	0xFF
+#endif
+
+
+#endif /* _UAPI_LINUX_FB_H */
diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h
new file mode 100644
index 0000000..074b886
--- /dev/null
+++ b/include/uapi/linux/fcntl.h
@@ -0,0 +1,52 @@
+#ifndef _UAPI_LINUX_FCNTL_H
+#define _UAPI_LINUX_FCNTL_H
+
+#include <asm/fcntl.h>
+
+#define F_SETLEASE	(F_LINUX_SPECIFIC_BASE + 0)
+#define F_GETLEASE	(F_LINUX_SPECIFIC_BASE + 1)
+
+/*
+ * Cancel a blocking posix lock; internal use only until we expose an
+ * asynchronous lock api to userspace:
+ */
+#define F_CANCELLK	(F_LINUX_SPECIFIC_BASE + 5)
+
+/* Create a file descriptor with FD_CLOEXEC set. */
+#define F_DUPFD_CLOEXEC	(F_LINUX_SPECIFIC_BASE + 6)
+
+/*
+ * Request nofications on a directory.
+ * See below for events that may be notified.
+ */
+#define F_NOTIFY	(F_LINUX_SPECIFIC_BASE+2)
+
+/*
+ * Set and get of pipe page size array
+ */
+#define F_SETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 7)
+#define F_GETPIPE_SZ	(F_LINUX_SPECIFIC_BASE + 8)
+
+/*
+ * Types of directory notifications that may be requested.
+ */
+#define DN_ACCESS	0x00000001	/* File accessed */
+#define DN_MODIFY	0x00000002	/* File modified */
+#define DN_CREATE	0x00000004	/* File created */
+#define DN_DELETE	0x00000008	/* File removed */
+#define DN_RENAME	0x00000010	/* File renamed */
+#define DN_ATTRIB	0x00000020	/* File changed attibutes */
+#define DN_MULTISHOT	0x80000000	/* Don't remove notifier */
+
+#define AT_FDCWD		-100    /* Special value used to indicate
+                                           openat should use the current
+                                           working directory. */
+#define AT_SYMLINK_NOFOLLOW	0x100   /* Do not follow symbolic links.  */
+#define AT_REMOVEDIR		0x200   /* Remove directory instead of
+                                           unlinking file.  */
+#define AT_SYMLINK_FOLLOW	0x400   /* Follow symbolic links.  */
+#define AT_NO_AUTOMOUNT		0x800	/* Suppress terminal automount traversal */
+#define AT_EMPTY_PATH		0x1000	/* Allow empty relative pathname */
+
+
+#endif /* _UAPI_LINUX_FCNTL_H */
diff --git a/include/uapi/linux/fd.h b/include/uapi/linux/fd.h
new file mode 100644
index 0000000..f1f3dd5
--- /dev/null
+++ b/include/uapi/linux/fd.h
@@ -0,0 +1,382 @@
+#ifndef _UAPI_LINUX_FD_H
+#define _UAPI_LINUX_FD_H
+
+#include <linux/ioctl.h>
+#include <linux/compiler.h>
+
+/* New file layout: Now the ioctl definitions immediately follow the
+ * definitions of the structures that they use */
+
+/*
+ * Geometry
+ */
+struct floppy_struct {
+	unsigned int	size,		/* nr of sectors total */
+			sect,		/* sectors per track */
+			head,		/* nr of heads */
+			track,		/* nr of tracks */
+			stretch;	/* bit 0 !=0 means double track steps */
+					/* bit 1 != 0 means swap sides */
+					/* bits 2..9 give the first sector */
+					/*  number (the LSB is flipped) */
+#define FD_STRETCH 1
+#define FD_SWAPSIDES 2
+#define FD_ZEROBASED 4
+#define FD_SECTBASEMASK 0x3FC
+#define FD_MKSECTBASE(s) (((s) ^ 1) << 2)
+#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1)
+
+	unsigned char	gap,		/* gap1 size */
+
+			rate,		/* data rate. |= 0x40 for perpendicular */
+#define FD_2M 0x4
+#define FD_SIZECODEMASK 0x38
+#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8)
+#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \
+			     512 : 128 << FD_SIZECODE(floppy) )
+#define FD_PERP 0x40
+
+			spec1,		/* stepping rate, head unload time */
+			fmt_gap;	/* gap2 size */
+	const char	* name; /* used only for predefined formats */
+};
+
+
+/* commands needing write access have 0x40 set */
+/* commands needing super user access have 0x80 set */
+
+#define FDCLRPRM _IO(2, 0x41)
+/* clear user-defined parameters */
+
+#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) 
+#define FDSETMEDIAPRM FDSETPRM
+/* set user-defined parameters for current media */
+
+#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) 
+#define FDGETPRM _IOR(2, 0x04, struct floppy_struct)
+#define FDDEFMEDIAPRM FDDEFPRM
+#define FDGETMEDIAPRM FDGETPRM
+/* set/get disk parameters */
+
+
+#define	FDMSGON  _IO(2,0x45)
+#define	FDMSGOFF _IO(2,0x46)
+/* issue/don't issue kernel messages on media type change */
+
+
+/* 
+ * Formatting (obsolete)
+ */
+#define FD_FILL_BYTE 0xF6 /* format fill byte. */
+
+struct format_descr {
+	unsigned int device,head,track;
+};
+
+#define FDFMTBEG _IO(2,0x47)
+/* begin formatting a disk */
+#define	FDFMTTRK _IOW(2,0x48, struct format_descr)
+/* format the specified track */
+#define FDFMTEND _IO(2,0x49)
+/* end formatting a disk */
+
+
+/*
+ * Error thresholds
+ */
+struct floppy_max_errors {
+	unsigned int
+	  abort,      /* number of errors to be reached before aborting */
+	  read_track, /* maximal number of errors permitted to read an
+		       * entire track at once */
+	  reset,      /* maximal number of errors before a reset is tried */
+	  recal,      /* maximal number of errors before a recalibrate is
+		       * tried */
+
+	  /*
+	   * Threshold for reporting FDC errors to the console.
+	   * Setting this to zero may flood your screen when using
+	   * ultra cheap floppies ;-)
+	   */
+	  reporting;
+
+};
+
+#define FDSETEMSGTRESH	_IO(2,0x4a)
+/* set fdc error reporting threshold */
+
+#define FDFLUSH  _IO(2,0x4b)
+/* flush buffers for media; either for verifying media, or for
+ * handling a media change without closing the file descriptor */
+
+#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors)
+#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors)
+/* set/get abortion and read_track threshold. See also floppy_drive_params
+ * structure */
+
+
+typedef char floppy_drive_name[16];
+#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name)
+/* get drive type: 5 1/4 or 3 1/2 */
+
+
+/*
+ * Drive parameters (user modifiable)
+ */
+struct floppy_drive_params {
+	signed char cmos;		/* CMOS type */
+	
+	/* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms 
+	 * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA).
+	 */
+	unsigned long max_dtr;		/* Step rate, usec */
+	unsigned long hlt;     		/* Head load/settle time, msec */
+	unsigned long hut;     		/* Head unload time (remnant of 
+					 * 8" drives) */
+	unsigned long srt;     		/* Step rate, usec */
+
+	unsigned long spinup;		/* time needed for spinup (expressed
+					 * in jiffies) */
+	unsigned long spindown;		/* timeout needed for spindown */
+	unsigned char spindown_offset;	/* decides in which position the disk
+					 * will stop */
+	unsigned char select_delay;	/* delay to wait after select */
+	unsigned char rps;		/* rotations per second */
+	unsigned char tracks;		/* maximum number of tracks */
+	unsigned long timeout;		/* timeout for interrupt requests */
+	
+	unsigned char interleave_sect;	/* if there are more sectors, use 
+					 * interleave */
+	
+	struct floppy_max_errors max_errors;
+	
+	char flags;			/* various flags, including ftd_msg */
+/*
+ * Announce successful media type detection and media information loss after
+ * disk changes.
+ * Also used to enable/disable printing of overrun warnings.
+ */
+
+#define FTD_MSG 0x10
+#define FD_BROKEN_DCL 0x20
+#define FD_DEBUG 0x02
+#define FD_SILENT_DCL_CLEAR 0x4
+#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware 
+				considerations */
+
+	char read_track;		/* use readtrack during probing? */
+
+/*
+ * Auto-detection. Each drive type has eight formats which are
+ * used in succession to try to read the disk. If the FDC cannot lock onto
+ * the disk, the next format is tried. This uses the variable 'probing'.
+ */
+	short autodetect[8];		/* autodetected formats */
+	
+	int checkfreq; /* how often should the drive be checked for disk 
+			* changes */
+	int native_format; /* native format of this drive */
+};
+
+enum {
+	FD_NEED_TWADDLE_BIT,	/* more magic */
+	FD_VERIFY_BIT,		/* inquire for write protection */
+	FD_DISK_NEWCHANGE_BIT,	/* change detected, and no action undertaken yet
+				 * to clear media change status */
+	FD_UNUSED_BIT,
+	FD_DISK_CHANGED_BIT,	/* disk has been changed since last i/o */
+	FD_DISK_WRITABLE_BIT	/* disk is writable */
+};
+
+#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params)
+#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params)
+/* set/get drive parameters */
+
+
+/*
+ * Current drive state (not directly modifiable by user, readonly)
+ */
+struct floppy_drive_struct {
+	unsigned long flags;
+/* values for these flags */
+#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT)
+#define FD_VERIFY (1 << FD_VERIFY_BIT)
+#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT)
+#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT)
+#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT)
+
+	unsigned long spinup_date;
+	unsigned long select_date;
+	unsigned long first_read_date;
+	short probed_format;
+	short track; /* current track */
+	short maxblock; /* id of highest block read */
+	short maxtrack; /* id of highest half track read */
+	int generation; /* how many diskchanges? */
+
+/*
+ * (User-provided) media information is _not_ discarded after a media change
+ * if the corresponding keep_data flag is non-zero. Positive values are
+ * decremented after each probe.
+ */
+	int keep_data;
+	
+	/* Prevent "aliased" accesses. */
+	int fd_ref;
+	int fd_device;
+	unsigned long last_checked; /* when was the drive last checked for a disk 
+			   * change? */
+	
+	char *dmabuf;
+	int bufblocks;
+};
+
+#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct)
+#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct)
+/* get drive state: GET returns the cached state, POLL polls for new state */
+
+
+/*
+ * reset FDC
+ */
+enum reset_mode {
+	FD_RESET_IF_NEEDED,	/* reset only if the reset flags is set */
+	FD_RESET_IF_RAWCMD,	/* obsolete */
+	FD_RESET_ALWAYS		/* reset always */
+};
+#define FDRESET _IO(2, 0x54)
+
+
+/*
+ * FDC state
+ */
+struct floppy_fdc_state {	
+	int spec1;		/* spec1 value last used */
+	int spec2;		/* spec2 value last used */
+	int dtr;
+	unsigned char version;	/* FDC version code */
+	unsigned char dor;
+	unsigned long address;	/* io address */
+	unsigned int rawcmd:2;
+	unsigned int reset:1;
+	unsigned int need_configure:1;
+	unsigned int perp_mode:2;
+	unsigned int has_fifo:1;
+	unsigned int driver_version;	/* version code for floppy driver */
+#define FD_DRIVER_VERSION 0x100
+/* user programs using the floppy API should use floppy_fdc_state to
+ * get the version number of the floppy driver that they are running
+ * on. If this version number is bigger than the one compiled into the
+ * user program (the FD_DRIVER_VERSION define), it should be prepared
+ * to bigger structures
+ */
+
+	unsigned char track[4];
+	/* Position of the heads of the 4 units attached to this FDC,
+	 * as stored on the FDC. In the future, the position as stored
+	 * on the FDC might not agree with the actual physical
+	 * position of these drive heads. By allowing such
+	 * disagreement, it will be possible to reset the FDC without
+	 * incurring the expensive cost of repositioning all heads.
+	 * Right now, these positions are hard wired to 0. */
+
+};
+
+#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state)
+
+
+/*
+ * Asynchronous Write error tracking
+ */
+struct floppy_write_errors {
+	/* Write error logging.
+	 *
+	 * These fields can be cleared with the FDWERRORCLR ioctl.
+	 * Only writes that were attempted but failed due to a physical media
+	 * error are logged.  write(2) calls that fail and return an error code
+	 * to the user process are not counted.
+	 */
+
+	unsigned int write_errors;  /* number of physical write errors 
+				     * encountered */
+	
+	/* position of first and last write errors */
+	unsigned long first_error_sector;
+	int           first_error_generation;
+	unsigned long last_error_sector;
+	int           last_error_generation;
+	
+	unsigned int badness; /* highest retry count for a read or write 
+			       * operation */
+};
+
+#define FDWERRORCLR  _IO(2, 0x56)
+/* clear write error and badness information */
+#define FDWERRORGET  _IOR(2, 0x17, struct floppy_write_errors)
+/* get write error and badness information */
+
+
+/*
+ * Raw commands
+ */
+/* new interface flag: now we can do them in batches */
+#define FDHAVEBATCHEDRAWCMD
+
+struct floppy_raw_cmd {
+	unsigned int flags;
+#define FD_RAW_READ 1
+#define FD_RAW_WRITE 2
+#define FD_RAW_NO_MOTOR 4
+#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */
+#define FD_RAW_INTR 8    /* wait for an interrupt */
+#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */
+#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command 
+				    * completion */
+#define FD_RAW_NEED_DISK 0x40  /* this command needs a disk to be present */
+#define FD_RAW_NEED_SEEK 0x80  /* this command uses an implied seek (soft) */
+
+/* more "in" flags */
+#define FD_RAW_MORE 0x100  /* more records follow */
+#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */
+#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */
+#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure
+				  * detection too */
+
+/* more "out" flags */
+#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */
+#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */
+
+	void __user *data;
+	char *kernel_data; /* location of data buffer in the kernel */
+	struct floppy_raw_cmd *next; /* used for chaining of raw cmd's 
+				      * within the kernel */
+	long length; /* in: length of dma transfer. out: remaining bytes */
+	long phys_length; /* physical length, if different from dma length */
+	int buffer_length; /* length of allocated buffer */
+
+	unsigned char rate;
+	unsigned char cmd_count;
+	unsigned char cmd[16];
+	unsigned char reply_count;
+	unsigned char reply[16];
+	int track;
+	int resultcode;
+
+	int reserved1;
+	int reserved2;
+};
+
+#define FDRAWCMD _IO(2, 0x58)
+/* send a raw command to the fdc. Structure size not included, because of
+ * batches */
+
+#define FDTWADDLE _IO(2, 0x59)
+/* flicker motor-on bit before reading a sector. Experimental */
+
+
+#define FDEJECT _IO(2, 0x5a)
+/* eject the disk */
+
+
+
+#endif /* _UAPI_LINUX_FD_H */
diff --git a/include/linux/fdreg.h b/include/uapi/linux/fdreg.h
similarity index 100%
rename from include/linux/fdreg.h
rename to include/uapi/linux/fdreg.h
diff --git a/include/linux/fib_rules.h b/include/uapi/linux/fib_rules.h
similarity index 100%
rename from include/linux/fib_rules.h
rename to include/uapi/linux/fib_rules.h
diff --git a/include/linux/fiemap.h b/include/uapi/linux/fiemap.h
similarity index 100%
rename from include/linux/fiemap.h
rename to include/uapi/linux/fiemap.h
diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h
new file mode 100644
index 0000000..3d79224
--- /dev/null
+++ b/include/uapi/linux/filter.h
@@ -0,0 +1,135 @@
+/*
+ * Linux Socket Filter Data Structures
+ */
+
+#ifndef _UAPI__LINUX_FILTER_H__
+#define _UAPI__LINUX_FILTER_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+/*
+ * Current version of the filter code architecture.
+ */
+#define BPF_MAJOR_VERSION 1
+#define BPF_MINOR_VERSION 1
+
+/*
+ *	Try and keep these values and structures similar to BSD, especially
+ *	the BPF code definitions which need to match so you can share filters
+ */
+ 
+struct sock_filter {	/* Filter block */
+	__u16	code;   /* Actual filter code */
+	__u8	jt;	/* Jump true */
+	__u8	jf;	/* Jump false */
+	__u32	k;      /* Generic multiuse field */
+};
+
+struct sock_fprog {	/* Required for SO_ATTACH_FILTER. */
+	unsigned short		len;	/* Number of filter blocks */
+	struct sock_filter __user *filter;
+};
+
+/*
+ * Instruction classes
+ */
+
+#define BPF_CLASS(code) ((code) & 0x07)
+#define         BPF_LD          0x00
+#define         BPF_LDX         0x01
+#define         BPF_ST          0x02
+#define         BPF_STX         0x03
+#define         BPF_ALU         0x04
+#define         BPF_JMP         0x05
+#define         BPF_RET         0x06
+#define         BPF_MISC        0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code)  ((code) & 0x18)
+#define         BPF_W           0x00
+#define         BPF_H           0x08
+#define         BPF_B           0x10
+#define BPF_MODE(code)  ((code) & 0xe0)
+#define         BPF_IMM         0x00
+#define         BPF_ABS         0x20
+#define         BPF_IND         0x40
+#define         BPF_MEM         0x60
+#define         BPF_LEN         0x80
+#define         BPF_MSH         0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code)    ((code) & 0xf0)
+#define         BPF_ADD         0x00
+#define         BPF_SUB         0x10
+#define         BPF_MUL         0x20
+#define         BPF_DIV         0x30
+#define         BPF_OR          0x40
+#define         BPF_AND         0x50
+#define         BPF_LSH         0x60
+#define         BPF_RSH         0x70
+#define         BPF_NEG         0x80
+#define		BPF_MOD		0x90
+#define		BPF_XOR		0xa0
+
+#define         BPF_JA          0x00
+#define         BPF_JEQ         0x10
+#define         BPF_JGT         0x20
+#define         BPF_JGE         0x30
+#define         BPF_JSET        0x40
+#define BPF_SRC(code)   ((code) & 0x08)
+#define         BPF_K           0x00
+#define         BPF_X           0x08
+
+/* ret - BPF_K and BPF_X also apply */
+#define BPF_RVAL(code)  ((code) & 0x18)
+#define         BPF_A           0x10
+
+/* misc */
+#define BPF_MISCOP(code) ((code) & 0xf8)
+#define         BPF_TAX         0x00
+#define         BPF_TXA         0x80
+
+#ifndef BPF_MAXINSNS
+#define BPF_MAXINSNS 4096
+#endif
+
+/*
+ * Macros for filter block array initializers.
+ */
+#ifndef BPF_STMT
+#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
+#endif
+#ifndef BPF_JUMP
+#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
+#endif
+
+/*
+ * Number of scratch memory words for: BPF_ST and BPF_STX
+ */
+#define BPF_MEMWORDS 16
+
+/* RATIONALE. Negative offsets are invalid in BPF.
+   We use them to reference ancillary data.
+   Unlike introduction new instructions, it does not break
+   existing compilers/optimizers.
+ */
+#define SKF_AD_OFF    (-0x1000)
+#define SKF_AD_PROTOCOL 0
+#define SKF_AD_PKTTYPE 	4
+#define SKF_AD_IFINDEX 	8
+#define SKF_AD_NLATTR	12
+#define SKF_AD_NLATTR_NEST	16
+#define SKF_AD_MARK 	20
+#define SKF_AD_QUEUE	24
+#define SKF_AD_HATYPE	28
+#define SKF_AD_RXHASH	32
+#define SKF_AD_CPU	36
+#define SKF_AD_ALU_XOR_X	40
+#define SKF_AD_MAX	44
+#define SKF_NET_OFF   (-0x100000)
+#define SKF_LL_OFF    (-0x200000)
+
+
+#endif /* _UAPI__LINUX_FILTER_H__ */
diff --git a/include/linux/firewire-cdev.h b/include/uapi/linux/firewire-cdev.h
similarity index 100%
rename from include/linux/firewire-cdev.h
rename to include/uapi/linux/firewire-cdev.h
diff --git a/include/linux/firewire-constants.h b/include/uapi/linux/firewire-constants.h
similarity index 100%
rename from include/linux/firewire-constants.h
rename to include/uapi/linux/firewire-constants.h
diff --git a/include/uapi/linux/flat.h b/include/uapi/linux/flat.h
new file mode 100644
index 0000000..88cd6ba
--- /dev/null
+++ b/include/uapi/linux/flat.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2002-2003  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
+ *                          The Silver Hammer Group, Ltd.
+ *
+ * This file provides the definitions and structures needed to
+ * support uClinux flat-format executables.
+ */
+
+#ifndef _UAPI_LINUX_FLAT_H
+#define _UAPI_LINUX_FLAT_H
+
+
+#define	FLAT_VERSION			0x00000004L
+
+#ifdef CONFIG_BINFMT_SHARED_FLAT
+#define	MAX_SHARED_LIBS			(4)
+#else
+#define	MAX_SHARED_LIBS			(1)
+#endif
+
+/*
+ * To make everything easier to port and manage cross platform
+ * development,  all fields are in network byte order.
+ */
+
+struct flat_hdr {
+	char magic[4];
+	unsigned long rev;          /* version (as above) */
+	unsigned long entry;        /* Offset of first executable instruction
+	                               with text segment from beginning of file */
+	unsigned long data_start;   /* Offset of data segment from beginning of
+	                               file */
+	unsigned long data_end;     /* Offset of end of data segment
+	                               from beginning of file */
+	unsigned long bss_end;      /* Offset of end of bss segment from beginning
+	                               of file */
+
+	/* (It is assumed that data_end through bss_end forms the bss segment.) */
+
+	unsigned long stack_size;   /* Size of stack, in bytes */
+	unsigned long reloc_start;  /* Offset of relocation records from
+	                               beginning of file */
+	unsigned long reloc_count;  /* Number of relocation records */
+	unsigned long flags;       
+	unsigned long build_date;   /* When the program/library was built */
+	unsigned long filler[5];    /* Reservered, set to zero */
+};
+
+#define FLAT_FLAG_RAM    0x0001 /* load program entirely into RAM */
+#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
+#define FLAT_FLAG_GZIP   0x0004 /* all but the header is compressed */
+#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
+#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
+
+
+
+#endif /* _UAPI_LINUX_FLAT_H */
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
new file mode 100644
index 0000000..9fcc880
--- /dev/null
+++ b/include/uapi/linux/fs.h
@@ -0,0 +1,334 @@
+#ifndef _UAPI_LINUX_FS_H
+#define _UAPI_LINUX_FS_H
+
+/*
+ * This file has definitions for some important file table
+ * structures etc.
+ */
+
+#include <linux/limits.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
+ * the file limit at runtime and only root can increase the per-process
+ * nr_file rlimit, so it's safe to set up a ridiculously high absolute
+ * upper limit on files-per-process.
+ *
+ * Some programs (notably those using select()) may have to be 
+ * recompiled to take full advantage of the new limits..  
+ */
+
+/* Fixed constants first: */
+#undef NR_OPEN
+#define INR_OPEN_CUR 1024	/* Initial setting for nfile rlimits */
+#define INR_OPEN_MAX 4096	/* Hard limit for nfile rlimits */
+
+#define BLOCK_SIZE_BITS 10
+#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
+
+#define SEEK_SET	0	/* seek relative to beginning of file */
+#define SEEK_CUR	1	/* seek relative to current file position */
+#define SEEK_END	2	/* seek relative to end of file */
+#define SEEK_DATA	3	/* seek to the next data */
+#define SEEK_HOLE	4	/* seek to the next hole */
+#define SEEK_MAX	SEEK_HOLE
+
+struct fstrim_range {
+	__u64 start;
+	__u64 len;
+	__u64 minlen;
+};
+
+/* And dynamically-tunable limits and defaults: */
+struct files_stat_struct {
+	unsigned long nr_files;		/* read only */
+	unsigned long nr_free_files;	/* read only */
+	unsigned long max_files;		/* tunable */
+};
+
+struct inodes_stat_t {
+	int nr_inodes;
+	int nr_unused;
+	int dummy[5];		/* padding for sysctl ABI compatibility */
+};
+
+
+#define NR_FILE  8192	/* this can well be larger on a larger system */
+
+#define MAY_EXEC		0x00000001
+#define MAY_WRITE		0x00000002
+#define MAY_READ		0x00000004
+#define MAY_APPEND		0x00000008
+#define MAY_ACCESS		0x00000010
+#define MAY_OPEN		0x00000020
+#define MAY_CHDIR		0x00000040
+/* called from RCU mode, don't block */
+#define MAY_NOT_BLOCK		0x00000080
+
+/*
+ * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
+ * to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
+ */
+
+/* file is open for reading */
+#define FMODE_READ		((__force fmode_t)0x1)
+/* file is open for writing */
+#define FMODE_WRITE		((__force fmode_t)0x2)
+/* file is seekable */
+#define FMODE_LSEEK		((__force fmode_t)0x4)
+/* file can be accessed using pread */
+#define FMODE_PREAD		((__force fmode_t)0x8)
+/* file can be accessed using pwrite */
+#define FMODE_PWRITE		((__force fmode_t)0x10)
+/* File is opened for execution with sys_execve / sys_uselib */
+#define FMODE_EXEC		((__force fmode_t)0x20)
+/* File is opened with O_NDELAY (only set for block devices) */
+#define FMODE_NDELAY		((__force fmode_t)0x40)
+/* File is opened with O_EXCL (only set for block devices) */
+#define FMODE_EXCL		((__force fmode_t)0x80)
+/* File is opened using open(.., 3, ..) and is writeable only for ioctls
+   (specialy hack for floppy.c) */
+#define FMODE_WRITE_IOCTL	((__force fmode_t)0x100)
+/* 32bit hashes as llseek() offset (for directories) */
+#define FMODE_32BITHASH         ((__force fmode_t)0x200)
+/* 64bit hashes as llseek() offset (for directories) */
+#define FMODE_64BITHASH         ((__force fmode_t)0x400)
+
+/*
+ * Don't update ctime and mtime.
+ *
+ * Currently a special hack for the XFS open_by_handle ioctl, but we'll
+ * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
+ */
+#define FMODE_NOCMTIME		((__force fmode_t)0x800)
+
+/* Expect random access pattern */
+#define FMODE_RANDOM		((__force fmode_t)0x1000)
+
+/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
+#define FMODE_UNSIGNED_OFFSET	((__force fmode_t)0x2000)
+
+/* File is opened with O_PATH; almost nothing can be done with it */
+#define FMODE_PATH		((__force fmode_t)0x4000)
+
+/* File was opened by fanotify and shouldn't generate fanotify events */
+#define FMODE_NONOTIFY		((__force fmode_t)0x1000000)
+
+/*
+ * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
+ * that indicates that they should check the contents of the iovec are
+ * valid, but not check the memory that the iovec elements
+ * points too.
+ */
+#define CHECK_IOVEC_ONLY -1
+
+#define SEL_IN		1
+#define SEL_OUT		2
+#define SEL_EX		4
+
+/* public flags for file_system_type */
+#define FS_REQUIRES_DEV 1 
+#define FS_BINARY_MOUNTDATA 2
+#define FS_HAS_SUBTYPE 4
+#define FS_REVAL_DOT	16384	/* Check the paths ".", ".." for staleness */
+#define FS_RENAME_DOES_D_MOVE	32768	/* FS will handle d_move()
+					 * during rename() internally.
+					 */
+
+/*
+ * These are the fs-independent mount-flags: up to 32 flags are supported
+ */
+#define MS_RDONLY	 1	/* Mount read-only */
+#define MS_NOSUID	 2	/* Ignore suid and sgid bits */
+#define MS_NODEV	 4	/* Disallow access to device special files */
+#define MS_NOEXEC	 8	/* Disallow program execution */
+#define MS_SYNCHRONOUS	16	/* Writes are synced at once */
+#define MS_REMOUNT	32	/* Alter flags of a mounted FS */
+#define MS_MANDLOCK	64	/* Allow mandatory locks on an FS */
+#define MS_DIRSYNC	128	/* Directory modifications are synchronous */
+#define MS_NOATIME	1024	/* Do not update access times. */
+#define MS_NODIRATIME	2048	/* Do not update directory access times */
+#define MS_BIND		4096
+#define MS_MOVE		8192
+#define MS_REC		16384
+#define MS_VERBOSE	32768	/* War is peace. Verbosity is silence.
+				   MS_VERBOSE is deprecated. */
+#define MS_SILENT	32768
+#define MS_POSIXACL	(1<<16)	/* VFS does not apply the umask */
+#define MS_UNBINDABLE	(1<<17)	/* change to unbindable */
+#define MS_PRIVATE	(1<<18)	/* change to private */
+#define MS_SLAVE	(1<<19)	/* change to slave */
+#define MS_SHARED	(1<<20)	/* change to shared */
+#define MS_RELATIME	(1<<21)	/* Update atime relative to mtime/ctime. */
+#define MS_KERNMOUNT	(1<<22) /* this is a kern_mount call */
+#define MS_I_VERSION	(1<<23) /* Update inode I_version field */
+#define MS_STRICTATIME	(1<<24) /* Always perform atime updates */
+#define MS_NOSEC	(1<<28)
+#define MS_BORN		(1<<29)
+#define MS_ACTIVE	(1<<30)
+#define MS_NOUSER	(1<<31)
+
+/*
+ * Superblock flags that can be altered by MS_REMOUNT
+ */
+#define MS_RMT_MASK	(MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
+
+/*
+ * Old magic mount flag and mask
+ */
+#define MS_MGC_VAL 0xC0ED0000
+#define MS_MGC_MSK 0xffff0000
+
+/* Inode flags - they have nothing to superblock flags now */
+
+#define S_SYNC		1	/* Writes are synced at once */
+#define S_NOATIME	2	/* Do not update access times */
+#define S_APPEND	4	/* Append-only file */
+#define S_IMMUTABLE	8	/* Immutable file */
+#define S_DEAD		16	/* removed, but still open directory */
+#define S_NOQUOTA	32	/* Inode is not counted to quota */
+#define S_DIRSYNC	64	/* Directory modifications are synchronous */
+#define S_NOCMTIME	128	/* Do not update file c/mtime */
+#define S_SWAPFILE	256	/* Do not truncate: swapon got its bmaps */
+#define S_PRIVATE	512	/* Inode is fs-internal */
+#define S_IMA		1024	/* Inode has an associated IMA struct */
+#define S_AUTOMOUNT	2048	/* Automount/referral quasi-directory */
+#define S_NOSEC		4096	/* no suid or xattr security attributes */
+
+/*
+ * Note that nosuid etc flags are inode-specific: setting some file-system
+ * flags just means all the inodes inherit those flags by default. It might be
+ * possible to override it selectively if you really wanted to with some
+ * ioctl() that is not currently implemented.
+ *
+ * Exception: MS_RDONLY is always applied to the entire file system.
+ *
+ * Unfortunately, it is possible to change a filesystems flags with it mounted
+ * with files in use.  This means that all of the inodes will not have their
+ * i_flags updated.  Hence, i_flags no longer inherit the superblock mount
+ * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
+ */
+#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
+
+#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
+#define IS_SYNC(inode)		(__IS_FLG(inode, MS_SYNCHRONOUS) || \
+					((inode)->i_flags & S_SYNC))
+#define IS_DIRSYNC(inode)	(__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
+					((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
+#define IS_MANDLOCK(inode)	__IS_FLG(inode, MS_MANDLOCK)
+#define IS_NOATIME(inode)   __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
+#define IS_I_VERSION(inode)   __IS_FLG(inode, MS_I_VERSION)
+
+#define IS_NOQUOTA(inode)	((inode)->i_flags & S_NOQUOTA)
+#define IS_APPEND(inode)	((inode)->i_flags & S_APPEND)
+#define IS_IMMUTABLE(inode)	((inode)->i_flags & S_IMMUTABLE)
+#define IS_POSIXACL(inode)	__IS_FLG(inode, MS_POSIXACL)
+
+#define IS_DEADDIR(inode)	((inode)->i_flags & S_DEAD)
+#define IS_NOCMTIME(inode)	((inode)->i_flags & S_NOCMTIME)
+#define IS_SWAPFILE(inode)	((inode)->i_flags & S_SWAPFILE)
+#define IS_PRIVATE(inode)	((inode)->i_flags & S_PRIVATE)
+#define IS_IMA(inode)		((inode)->i_flags & S_IMA)
+#define IS_AUTOMOUNT(inode)	((inode)->i_flags & S_AUTOMOUNT)
+#define IS_NOSEC(inode)		((inode)->i_flags & S_NOSEC)
+
+/* the read-only stuff doesn't really belong here, but any other place is
+   probably as bad and I don't want to create yet another include file. */
+
+#define BLKROSET   _IO(0x12,93)	/* set device read-only (0 = read-write) */
+#define BLKROGET   _IO(0x12,94)	/* get read-only status (0 = read_write) */
+#define BLKRRPART  _IO(0x12,95)	/* re-read partition table */
+#define BLKGETSIZE _IO(0x12,96)	/* return device size /512 (long *arg) */
+#define BLKFLSBUF  _IO(0x12,97)	/* flush buffer cache */
+#define BLKRASET   _IO(0x12,98)	/* set read ahead for block device */
+#define BLKRAGET   _IO(0x12,99)	/* get current read ahead setting */
+#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
+#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
+#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
+#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
+#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */
+#if 0
+#define BLKPG      _IO(0x12,105)/* See blkpg.h */
+
+/* Some people are morons.  Do not use sizeof! */
+
+#define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */
+#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set */
+/* This was here just to show that the number is taken -
+   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
+#endif
+/* A jump here: 108-111 have been used for various private purposes. */
+#define BLKBSZGET  _IOR(0x12,112,size_t)
+#define BLKBSZSET  _IOW(0x12,113,size_t)
+#define BLKGETSIZE64 _IOR(0x12,114,size_t)	/* return device size in bytes (u64 *arg) */
+#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
+#define BLKTRACESTART _IO(0x12,116)
+#define BLKTRACESTOP _IO(0x12,117)
+#define BLKTRACETEARDOWN _IO(0x12,118)
+#define BLKDISCARD _IO(0x12,119)
+#define BLKIOMIN _IO(0x12,120)
+#define BLKIOOPT _IO(0x12,121)
+#define BLKALIGNOFF _IO(0x12,122)
+#define BLKPBSZGET _IO(0x12,123)
+#define BLKDISCARDZEROES _IO(0x12,124)
+#define BLKSECDISCARD _IO(0x12,125)
+#define BLKROTATIONAL _IO(0x12,126)
+#define BLKZEROOUT _IO(0x12,127)
+
+#define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
+#define FIBMAP	   _IO(0x00,1)	/* bmap access */
+#define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
+#define FIFREEZE	_IOWR('X', 119, int)	/* Freeze */
+#define FITHAW		_IOWR('X', 120, int)	/* Thaw */
+#define FITRIM		_IOWR('X', 121, struct fstrim_range)	/* Trim */
+
+#define	FS_IOC_GETFLAGS			_IOR('f', 1, long)
+#define	FS_IOC_SETFLAGS			_IOW('f', 2, long)
+#define	FS_IOC_GETVERSION		_IOR('v', 1, long)
+#define	FS_IOC_SETVERSION		_IOW('v', 2, long)
+#define FS_IOC_FIEMAP			_IOWR('f', 11, struct fiemap)
+#define FS_IOC32_GETFLAGS		_IOR('f', 1, int)
+#define FS_IOC32_SETFLAGS		_IOW('f', 2, int)
+#define FS_IOC32_GETVERSION		_IOR('v', 1, int)
+#define FS_IOC32_SETVERSION		_IOW('v', 2, int)
+
+/*
+ * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
+ */
+#define	FS_SECRM_FL			0x00000001 /* Secure deletion */
+#define	FS_UNRM_FL			0x00000002 /* Undelete */
+#define	FS_COMPR_FL			0x00000004 /* Compress file */
+#define FS_SYNC_FL			0x00000008 /* Synchronous updates */
+#define FS_IMMUTABLE_FL			0x00000010 /* Immutable file */
+#define FS_APPEND_FL			0x00000020 /* writes to file may only append */
+#define FS_NODUMP_FL			0x00000040 /* do not dump file */
+#define FS_NOATIME_FL			0x00000080 /* do not update atime */
+/* Reserved for compression usage... */
+#define FS_DIRTY_FL			0x00000100
+#define FS_COMPRBLK_FL			0x00000200 /* One or more compressed clusters */
+#define FS_NOCOMP_FL			0x00000400 /* Don't compress */
+#define FS_ECOMPR_FL			0x00000800 /* Compression error */
+/* End compression flags --- maybe not all used */
+#define FS_BTREE_FL			0x00001000 /* btree format dir */
+#define FS_INDEX_FL			0x00001000 /* hash-indexed directory */
+#define FS_IMAGIC_FL			0x00002000 /* AFS directory */
+#define FS_JOURNAL_DATA_FL		0x00004000 /* Reserved for ext3 */
+#define FS_NOTAIL_FL			0x00008000 /* file tail should not be merged */
+#define FS_DIRSYNC_FL			0x00010000 /* dirsync behaviour (directories only) */
+#define FS_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/
+#define FS_EXTENT_FL			0x00080000 /* Extents */
+#define FS_DIRECTIO_FL			0x00100000 /* Use direct i/o */
+#define FS_NOCOW_FL			0x00800000 /* Do not cow file */
+#define FS_RESERVED_FL			0x80000000 /* reserved for ext2 lib */
+
+#define FS_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */
+#define FS_FL_USER_MODIFIABLE		0x000380FF /* User modifiable flags */
+
+
+#define SYNC_FILE_RANGE_WAIT_BEFORE	1
+#define SYNC_FILE_RANGE_WRITE		2
+#define SYNC_FILE_RANGE_WAIT_AFTER	4
+
+#endif /* _UAPI_LINUX_FS_H */
diff --git a/include/uapi/linux/fsl_hypervisor.h b/include/uapi/linux/fsl_hypervisor.h
new file mode 100644
index 0000000..1bf0496
--- /dev/null
+++ b/include/uapi/linux/fsl_hypervisor.h
@@ -0,0 +1,220 @@
+/*
+ * Freescale hypervisor ioctl and kernel interface
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of this
+ * software, even if advised of the possibility of such damage.
+ *
+ * This file is used by the Freescale hypervisor management driver.  It can
+ * also be included by applications that need to communicate with the driver
+ * via the ioctl interface.
+ */
+
+#ifndef _UAPIFSL_HYPERVISOR_H
+#define _UAPIFSL_HYPERVISOR_H
+
+#include <linux/types.h>
+
+/**
+ * struct fsl_hv_ioctl_restart - restart a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to restart, or -1 for the
+ *             calling partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_RESTART
+ */
+struct fsl_hv_ioctl_restart {
+	__u32 ret;
+	__u32 partition;
+};
+
+/**
+ * struct fsl_hv_ioctl_status - get a partition's status
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to query, or -1 for the
+ *             calling partition
+ * @status: The returned status of the partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS
+ *
+ * Values of 'status':
+ *    0 = Stopped
+ *    1 = Running
+ *    2 = Starting
+ *    3 = Stopping
+ */
+struct fsl_hv_ioctl_status {
+	__u32 ret;
+	__u32 partition;
+	__u32 status;
+};
+
+/**
+ * struct fsl_hv_ioctl_start - start a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to control
+ * @entry_point: The offset within the guest IMA to start execution
+ * @load: If non-zero, reload the partition's images before starting
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_START
+ */
+struct fsl_hv_ioctl_start {
+	__u32 ret;
+	__u32 partition;
+	__u32 entry_point;
+	__u32 load;
+};
+
+/**
+ * struct fsl_hv_ioctl_stop - stop a partition
+ * @ret: return error code from the hypervisor
+ * @partition: the ID of the partition to stop, or -1 for the calling
+ *             partition
+ *
+ * Used by FSL_HV_IOCTL_PARTITION_STOP
+ */
+struct fsl_hv_ioctl_stop {
+	__u32 ret;
+	__u32 partition;
+};
+
+/**
+ * struct fsl_hv_ioctl_memcpy - copy memory between partitions
+ * @ret: return error code from the hypervisor
+ * @source: the partition ID of the source partition, or -1 for this
+ *          partition
+ * @target: the partition ID of the target partition, or -1 for this
+ *          partition
+ * @reserved: reserved, must be set to 0
+ * @local_addr: user-space virtual address of a buffer in the local
+ *              partition
+ * @remote_addr: guest physical address of a buffer in the
+ *           remote partition
+ * @count: the number of bytes to copy.  Both the local and remote
+ *         buffers must be at least 'count' bytes long
+ *
+ * Used by FSL_HV_IOCTL_MEMCPY
+ *
+ * The 'local' partition is the partition that calls this ioctl.  The
+ * 'remote' partition is a different partition.  The data is copied from
+ * the 'source' paritition' to the 'target' partition.
+ *
+ * The buffer in the remote partition must be guest physically
+ * contiguous.
+ *
+ * This ioctl does not support copying memory between two remote
+ * partitions or within the same partition, so either 'source' or
+ * 'target' (but not both) must be -1.  In other words, either
+ *
+ *      source == local and target == remote
+ * or
+ *      source == remote and target == local
+ */
+struct fsl_hv_ioctl_memcpy {
+	__u32 ret;
+	__u32 source;
+	__u32 target;
+	__u32 reserved;	/* padding to ensure local_vaddr is aligned */
+	__u64 local_vaddr;
+	__u64 remote_paddr;
+	__u64 count;
+};
+
+/**
+ * struct fsl_hv_ioctl_doorbell - ring a doorbell
+ * @ret: return error code from the hypervisor
+ * @doorbell: the handle of the doorbell to ring doorbell
+ *
+ * Used by FSL_HV_IOCTL_DOORBELL
+ */
+struct fsl_hv_ioctl_doorbell {
+	__u32 ret;
+	__u32 doorbell;
+};
+
+/**
+ * struct fsl_hv_ioctl_prop - get/set a device tree property
+ * @ret: return error code from the hypervisor
+ * @handle: handle of partition whose tree to access
+ * @path: virtual address of path name of node to access
+ * @propname: virtual address of name of property to access
+ * @propval: virtual address of property data buffer
+ * @proplen: Size of property data buffer
+ * @reserved: reserved, must be set to 0
+ *
+ * Used by FSL_HV_IOCTL_DOORBELL
+ */
+struct fsl_hv_ioctl_prop {
+	__u32 ret;
+	__u32 handle;
+	__u64 path;
+	__u64 propname;
+	__u64 propval;
+	__u32 proplen;
+	__u32 reserved;	/* padding to ensure structure is aligned */
+};
+
+/* The ioctl type, documented in ioctl-number.txt */
+#define FSL_HV_IOCTL_TYPE	0xAF
+
+/* Restart another partition */
+#define FSL_HV_IOCTL_PARTITION_RESTART \
+	_IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart)
+
+/* Get a partition's status */
+#define FSL_HV_IOCTL_PARTITION_GET_STATUS \
+	_IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status)
+
+/* Boot another partition */
+#define FSL_HV_IOCTL_PARTITION_START \
+	_IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start)
+
+/* Stop this or another partition */
+#define FSL_HV_IOCTL_PARTITION_STOP \
+	_IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop)
+
+/* Copy data from one partition to another */
+#define FSL_HV_IOCTL_MEMCPY \
+	_IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy)
+
+/* Ring a doorbell */
+#define FSL_HV_IOCTL_DOORBELL \
+	_IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell)
+
+/* Get a property from another guest's device tree */
+#define FSL_HV_IOCTL_GETPROP \
+	_IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop)
+
+/* Set a property in another guest's device tree */
+#define FSL_HV_IOCTL_SETPROP \
+	_IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop)
+
+
+#endif /* _UAPIFSL_HYPERVISOR_H */
diff --git a/include/linux/fuse.h b/include/uapi/linux/fuse.h
similarity index 100%
rename from include/linux/fuse.h
rename to include/uapi/linux/fuse.h
diff --git a/include/uapi/linux/futex.h b/include/uapi/linux/futex.h
new file mode 100644
index 0000000..0b1f716
--- /dev/null
+++ b/include/uapi/linux/futex.h
@@ -0,0 +1,152 @@
+#ifndef _UAPI_LINUX_FUTEX_H
+#define _UAPI_LINUX_FUTEX_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Second argument to futex syscall */
+
+
+#define FUTEX_WAIT		0
+#define FUTEX_WAKE		1
+#define FUTEX_FD		2
+#define FUTEX_REQUEUE		3
+#define FUTEX_CMP_REQUEUE	4
+#define FUTEX_WAKE_OP		5
+#define FUTEX_LOCK_PI		6
+#define FUTEX_UNLOCK_PI		7
+#define FUTEX_TRYLOCK_PI	8
+#define FUTEX_WAIT_BITSET	9
+#define FUTEX_WAKE_BITSET	10
+#define FUTEX_WAIT_REQUEUE_PI	11
+#define FUTEX_CMP_REQUEUE_PI	12
+
+#define FUTEX_PRIVATE_FLAG	128
+#define FUTEX_CLOCK_REALTIME	256
+#define FUTEX_CMD_MASK		~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME)
+
+#define FUTEX_WAIT_PRIVATE	(FUTEX_WAIT | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_PRIVATE	(FUTEX_WAKE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_REQUEUE_PRIVATE	(FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_OP_PRIVATE	(FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG)
+#define FUTEX_LOCK_PI_PRIVATE	(FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_UNLOCK_PI_PRIVATE	(FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_BITSET_PRIVATE	(FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_BITSET_PRIVATE	(FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_REQUEUE_PI_PRIVATE	(FUTEX_WAIT_REQUEUE_PI | \
+					 FUTEX_PRIVATE_FLAG)
+#define FUTEX_CMP_REQUEUE_PI_PRIVATE	(FUTEX_CMP_REQUEUE_PI | \
+					 FUTEX_PRIVATE_FLAG)
+
+/*
+ * Support for robust futexes: the kernel cleans up held futexes at
+ * thread exit time.
+ */
+
+/*
+ * Per-lock list entry - embedded in user-space locks, somewhere close
+ * to the futex field. (Note: user-space uses a double-linked list to
+ * achieve O(1) list add and remove, but the kernel only needs to know
+ * about the forward link)
+ *
+ * NOTE: this structure is part of the syscall ABI, and must not be
+ * changed.
+ */
+struct robust_list {
+	struct robust_list __user *next;
+};
+
+/*
+ * Per-thread list head:
+ *
+ * NOTE: this structure is part of the syscall ABI, and must only be
+ * changed if the change is first communicated with the glibc folks.
+ * (When an incompatible change is done, we'll increase the structure
+ *  size, which glibc will detect)
+ */
+struct robust_list_head {
+	/*
+	 * The head of the list. Points back to itself if empty:
+	 */
+	struct robust_list list;
+
+	/*
+	 * This relative offset is set by user-space, it gives the kernel
+	 * the relative position of the futex field to examine. This way
+	 * we keep userspace flexible, to freely shape its data-structure,
+	 * without hardcoding any particular offset into the kernel:
+	 */
+	long futex_offset;
+
+	/*
+	 * The death of the thread may race with userspace setting
+	 * up a lock's links. So to handle this race, userspace first
+	 * sets this field to the address of the to-be-taken lock,
+	 * then does the lock acquire, and then adds itself to the
+	 * list, and then clears this field. Hence the kernel will
+	 * always have full knowledge of all locks that the thread
+	 * _might_ have taken. We check the owner TID in any case,
+	 * so only truly owned locks will be handled.
+	 */
+	struct robust_list __user *list_op_pending;
+};
+
+/*
+ * Are there any waiters for this robust futex:
+ */
+#define FUTEX_WAITERS		0x80000000
+
+/*
+ * The kernel signals via this bit that a thread holding a futex
+ * has exited without unlocking the futex. The kernel also does
+ * a FUTEX_WAKE on such futexes, after setting the bit, to wake
+ * up any possible waiters:
+ */
+#define FUTEX_OWNER_DIED	0x40000000
+
+/*
+ * The rest of the robust-futex field is for the TID:
+ */
+#define FUTEX_TID_MASK		0x3fffffff
+
+/*
+ * This limit protects against a deliberately circular list.
+ * (Not worth introducing an rlimit for it)
+ */
+#define ROBUST_LIST_LIMIT	2048
+
+/*
+ * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a
+ * match of any bit.
+ */
+#define FUTEX_BITSET_MATCH_ANY	0xffffffff
+
+
+#define FUTEX_OP_SET		0	/* *(int *)UADDR2 = OPARG; */
+#define FUTEX_OP_ADD		1	/* *(int *)UADDR2 += OPARG; */
+#define FUTEX_OP_OR		2	/* *(int *)UADDR2 |= OPARG; */
+#define FUTEX_OP_ANDN		3	/* *(int *)UADDR2 &= ~OPARG; */
+#define FUTEX_OP_XOR		4	/* *(int *)UADDR2 ^= OPARG; */
+
+#define FUTEX_OP_OPARG_SHIFT	8	/* Use (1 << OPARG) instead of OPARG.  */
+
+#define FUTEX_OP_CMP_EQ		0	/* if (oldval == CMPARG) wake */
+#define FUTEX_OP_CMP_NE		1	/* if (oldval != CMPARG) wake */
+#define FUTEX_OP_CMP_LT		2	/* if (oldval < CMPARG) wake */
+#define FUTEX_OP_CMP_LE		3	/* if (oldval <= CMPARG) wake */
+#define FUTEX_OP_CMP_GT		4	/* if (oldval > CMPARG) wake */
+#define FUTEX_OP_CMP_GE		5	/* if (oldval >= CMPARG) wake */
+
+/* FUTEX_WAKE_OP will perform atomically
+   int oldval = *(int *)UADDR2;
+   *(int *)UADDR2 = oldval OP OPARG;
+   if (oldval CMP CMPARG)
+     wake UADDR2;  */
+
+#define FUTEX_OP(op, oparg, cmp, cmparg) \
+  (((op & 0xf) << 28) | ((cmp & 0xf) << 24)		\
+   | ((oparg & 0xfff) << 12) | (cmparg & 0xfff))
+
+#endif /* _UAPI_LINUX_FUTEX_H */
diff --git a/include/uapi/linux/gameport.h b/include/uapi/linux/gameport.h
new file mode 100644
index 0000000..49b29b0
--- /dev/null
+++ b/include/uapi/linux/gameport.h
@@ -0,0 +1,28 @@
+/*
+ *  Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _UAPI_GAMEPORT_H
+#define _UAPI_GAMEPORT_H
+
+
+
+#define GAMEPORT_MODE_DISABLED		0
+#define GAMEPORT_MODE_RAW		1
+#define GAMEPORT_MODE_COOKED		2
+
+#define GAMEPORT_ID_VENDOR_ANALOG	0x0001
+#define GAMEPORT_ID_VENDOR_MADCATZ	0x0002
+#define GAMEPORT_ID_VENDOR_LOGITECH	0x0003
+#define GAMEPORT_ID_VENDOR_CREATIVE	0x0004
+#define GAMEPORT_ID_VENDOR_GENIUS	0x0005
+#define GAMEPORT_ID_VENDOR_INTERACT	0x0006
+#define GAMEPORT_ID_VENDOR_MICROSOFT	0x0007
+#define GAMEPORT_ID_VENDOR_THRUSTMASTER	0x0008
+#define GAMEPORT_ID_VENDOR_GRAVIS	0x0009
+#define GAMEPORT_ID_VENDOR_GUILLEMOT	0x000a
+
+#endif /* _UAPI_GAMEPORT_H */
diff --git a/include/linux/gen_stats.h b/include/uapi/linux/gen_stats.h
similarity index 100%
rename from include/linux/gen_stats.h
rename to include/uapi/linux/gen_stats.h
diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h
new file mode 100644
index 0000000..c880a41
--- /dev/null
+++ b/include/uapi/linux/genetlink.h
@@ -0,0 +1,84 @@
+#ifndef _UAPI__LINUX_GENERIC_NETLINK_H
+#define _UAPI__LINUX_GENERIC_NETLINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+#define GENL_NAMSIZ	16	/* length of family name */
+
+#define GENL_MIN_ID	NLMSG_MIN_TYPE
+#define GENL_MAX_ID	1023
+
+struct genlmsghdr {
+	__u8	cmd;
+	__u8	version;
+	__u16	reserved;
+};
+
+#define GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct genlmsghdr))
+
+#define GENL_ADMIN_PERM		0x01
+#define GENL_CMD_CAP_DO		0x02
+#define GENL_CMD_CAP_DUMP	0x04
+#define GENL_CMD_CAP_HASPOL	0x08
+
+/*
+ * List of reserved static generic netlink identifiers:
+ */
+#define GENL_ID_GENERATE	0
+#define GENL_ID_CTRL		NLMSG_MIN_TYPE
+
+/**************************************************************************
+ * Controller
+ **************************************************************************/
+
+enum {
+	CTRL_CMD_UNSPEC,
+	CTRL_CMD_NEWFAMILY,
+	CTRL_CMD_DELFAMILY,
+	CTRL_CMD_GETFAMILY,
+	CTRL_CMD_NEWOPS,
+	CTRL_CMD_DELOPS,
+	CTRL_CMD_GETOPS,
+	CTRL_CMD_NEWMCAST_GRP,
+	CTRL_CMD_DELMCAST_GRP,
+	CTRL_CMD_GETMCAST_GRP, /* unused */
+	__CTRL_CMD_MAX,
+};
+
+#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1)
+
+enum {
+	CTRL_ATTR_UNSPEC,
+	CTRL_ATTR_FAMILY_ID,
+	CTRL_ATTR_FAMILY_NAME,
+	CTRL_ATTR_VERSION,
+	CTRL_ATTR_HDRSIZE,
+	CTRL_ATTR_MAXATTR,
+	CTRL_ATTR_OPS,
+	CTRL_ATTR_MCAST_GROUPS,
+	__CTRL_ATTR_MAX,
+};
+
+#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1)
+
+enum {
+	CTRL_ATTR_OP_UNSPEC,
+	CTRL_ATTR_OP_ID,
+	CTRL_ATTR_OP_FLAGS,
+	__CTRL_ATTR_OP_MAX,
+};
+
+#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1)
+
+enum {
+	CTRL_ATTR_MCAST_GRP_UNSPEC,
+	CTRL_ATTR_MCAST_GRP_NAME,
+	CTRL_ATTR_MCAST_GRP_ID,
+	__CTRL_ATTR_MCAST_GRP_MAX,
+};
+
+#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1)
+
+
+#endif /* _UAPI__LINUX_GENERIC_NETLINK_H */
diff --git a/include/linux/gfs2_ondisk.h b/include/uapi/linux/gfs2_ondisk.h
similarity index 100%
rename from include/linux/gfs2_ondisk.h
rename to include/uapi/linux/gfs2_ondisk.h
diff --git a/include/linux/gigaset_dev.h b/include/uapi/linux/gigaset_dev.h
similarity index 100%
rename from include/linux/gigaset_dev.h
rename to include/uapi/linux/gigaset_dev.h
diff --git a/include/uapi/linux/hdlc.h b/include/uapi/linux/hdlc.h
new file mode 100644
index 0000000..2c5f0af
--- /dev/null
+++ b/include/uapi/linux/hdlc.h
@@ -0,0 +1,23 @@
+/*
+ * Generic HDLC support routines for Linux
+ *
+ * Copyright (C) 1999-2005 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI__HDLC_H
+#define _UAPI__HDLC_H
+
+
+#define HDLC_MAX_MTU 1500	/* Ethernet 1500 bytes */
+#if 0
+#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */
+#else
+#define HDLC_MAX_MRU 1600 /* as required for FR network */
+#endif
+
+
+#endif /* _UAPI__HDLC_H */
diff --git a/include/uapi/linux/hdlcdrv.h b/include/uapi/linux/hdlcdrv.h
new file mode 100644
index 0000000..ffc79c0
--- /dev/null
+++ b/include/uapi/linux/hdlcdrv.h
@@ -0,0 +1,110 @@
+/*
+ * hdlcdrv.h  -- HDLC packet radio network driver.
+ * The Linux soundcard driver for 1200 baud and 9600 baud packet radio
+ * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA
+ */
+
+#ifndef _UAPI_HDLCDRV_H
+#define _UAPI_HDLCDRV_H
+
+/* -------------------------------------------------------------------- */
+/*
+ * structs for the IOCTL commands
+ */
+
+struct hdlcdrv_params {
+	int iobase;
+	int irq;
+	int dma;
+	int dma2;
+	int seriobase;
+	int pariobase;
+	int midiiobase;
+};	
+
+struct hdlcdrv_channel_params {
+	int tx_delay;  /* the transmitter keyup delay in 10ms units */
+	int tx_tail;   /* the transmitter keyoff delay in 10ms units */
+	int slottime;  /* the slottime in 10ms; usually 10 = 100ms */
+	int ppersist;  /* the p-persistence 0..255 */
+	int fulldup;   /* some driver do not support full duplex, setting */
+	               /* this just makes them send even if DCD is on */
+};	
+
+struct hdlcdrv_old_channel_state {
+  	int ptt;
+  	int dcd;
+  	int ptt_keyed;
+};
+
+struct hdlcdrv_channel_state {
+ 	int ptt;
+ 	int dcd;
+ 	int ptt_keyed;
+ 	unsigned long tx_packets;
+ 	unsigned long tx_errors;
+ 	unsigned long rx_packets;
+ 	unsigned long rx_errors;
+};
+
+struct hdlcdrv_ioctl {
+	int cmd;
+	union {
+		struct hdlcdrv_params mp;
+		struct hdlcdrv_channel_params cp;
+		struct hdlcdrv_channel_state cs;
+		struct hdlcdrv_old_channel_state ocs;
+		unsigned int calibrate;
+		unsigned char bits;
+		char modename[128];
+		char drivername[32];
+	} data;
+};
+
+/* -------------------------------------------------------------------- */
+
+/*
+ * ioctl values
+ */
+#define HDLCDRVCTL_GETMODEMPAR       0
+#define HDLCDRVCTL_SETMODEMPAR       1
+#define HDLCDRVCTL_MODEMPARMASK      2  /* not handled by hdlcdrv */
+#define HDLCDRVCTL_GETCHANNELPAR    10
+#define HDLCDRVCTL_SETCHANNELPAR    11
+#define HDLCDRVCTL_OLDGETSTAT       20
+#define HDLCDRVCTL_CALIBRATE        21
+#define HDLCDRVCTL_GETSTAT          22
+
+/*
+ * these are mainly for debugging purposes
+ */
+#define HDLCDRVCTL_GETSAMPLES       30
+#define HDLCDRVCTL_GETBITS          31
+
+/*
+ * not handled by hdlcdrv, but by its depending drivers
+ */
+#define HDLCDRVCTL_GETMODE          40
+#define HDLCDRVCTL_SETMODE          41
+#define HDLCDRVCTL_MODELIST         42
+#define HDLCDRVCTL_DRIVERNAME       43
+
+/*
+ * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK
+ */
+#define HDLCDRV_PARMASK_IOBASE      (1<<0)
+#define HDLCDRV_PARMASK_IRQ         (1<<1)
+#define HDLCDRV_PARMASK_DMA         (1<<2)
+#define HDLCDRV_PARMASK_DMA2        (1<<3)
+#define HDLCDRV_PARMASK_SERIOBASE   (1<<4)
+#define HDLCDRV_PARMASK_PARIOBASE   (1<<5)
+#define HDLCDRV_PARMASK_MIDIIOBASE  (1<<6)
+
+/* -------------------------------------------------------------------- */
+
+
+/* -------------------------------------------------------------------- */
+
+#endif /* _UAPI_HDLCDRV_H */
+
+/* -------------------------------------------------------------------- */
diff --git a/include/linux/hdreg.h b/include/uapi/linux/hdreg.h
similarity index 100%
rename from include/linux/hdreg.h
rename to include/uapi/linux/hdreg.h
diff --git a/include/uapi/linux/hid.h b/include/uapi/linux/hid.h
new file mode 100644
index 0000000..b60f484
--- /dev/null
+++ b/include/uapi/linux/hid.h
@@ -0,0 +1,66 @@
+/*
+ *  Copyright (c) 1999 Andreas Gal
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ *  Copyright (c) 2006-2007 Jiri Kosina
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+#ifndef _UAPI__HID_H
+#define _UAPI__HID_H
+
+
+
+/*
+ * USB HID (Human Interface Device) interface class code
+ */
+
+#define USB_INTERFACE_CLASS_HID		3
+
+/*
+ * USB HID interface subclass and protocol codes
+ */
+
+#define USB_INTERFACE_SUBCLASS_BOOT	1
+#define USB_INTERFACE_PROTOCOL_KEYBOARD	1
+#define USB_INTERFACE_PROTOCOL_MOUSE	2
+
+/*
+ * HID class requests
+ */
+
+#define HID_REQ_GET_REPORT		0x01
+#define HID_REQ_GET_IDLE		0x02
+#define HID_REQ_GET_PROTOCOL		0x03
+#define HID_REQ_SET_REPORT		0x09
+#define HID_REQ_SET_IDLE		0x0A
+#define HID_REQ_SET_PROTOCOL		0x0B
+
+/*
+ * HID class descriptor types
+ */
+
+#define HID_DT_HID			(USB_TYPE_CLASS | 0x01)
+#define HID_DT_REPORT			(USB_TYPE_CLASS | 0x02)
+#define HID_DT_PHYSICAL			(USB_TYPE_CLASS | 0x03)
+
+#define HID_MAX_DESCRIPTOR_SIZE		4096
+
+
+#endif /* _UAPI__HID_H */
diff --git a/include/uapi/linux/hiddev.h b/include/uapi/linux/hiddev.h
new file mode 100644
index 0000000..7df7884
--- /dev/null
+++ b/include/uapi/linux/hiddev.h
@@ -0,0 +1,212 @@
+/*
+ *  Copyright (c) 1999-2000 Vojtech Pavlik
+ *
+ *  Sponsored by SuSE
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ */
+#ifndef _UAPI_HIDDEV_H
+#define _UAPI_HIDDEV_H
+
+
+
+#include <linux/types.h>
+
+/*
+ * The event structure itself
+ */
+
+struct hiddev_event {
+	unsigned hid;
+	signed int value;
+};
+
+struct hiddev_devinfo {
+	__u32 bustype;
+	__u32 busnum;
+	__u32 devnum;
+	__u32 ifnum;
+	__s16 vendor;
+	__s16 product;
+	__s16 version;
+	__u32 num_applications;
+};
+
+struct hiddev_collection_info {
+	__u32 index;
+	__u32 type;
+	__u32 usage;
+	__u32 level;
+};
+
+#define HID_STRING_SIZE 256
+struct hiddev_string_descriptor {
+	__s32 index;
+	char value[HID_STRING_SIZE];
+};
+
+struct hiddev_report_info {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 num_fields;
+};
+
+/* To do a GUSAGE/SUSAGE, fill in at least usage_code,  report_type and 
+ * report_id.  Set report_id to REPORT_ID_UNKNOWN if the rest of the fields 
+ * are unknown.  Otherwise use a usage_ref struct filled in from a previous 
+ * successful GUSAGE call to save time.  To actually send a value to the
+ * device, perform a SUSAGE first, followed by a SREPORT.  An INITREPORT or a
+ * GREPORT isn't necessary for a GUSAGE to return valid data.
+ */
+#define HID_REPORT_ID_UNKNOWN 0xffffffff
+#define HID_REPORT_ID_FIRST   0x00000100
+#define HID_REPORT_ID_NEXT    0x00000200
+#define HID_REPORT_ID_MASK    0x000000ff
+#define HID_REPORT_ID_MAX     0x000000ff
+
+#define HID_REPORT_TYPE_INPUT	1
+#define HID_REPORT_TYPE_OUTPUT	2
+#define HID_REPORT_TYPE_FEATURE	3
+#define HID_REPORT_TYPE_MIN     1
+#define HID_REPORT_TYPE_MAX     3
+
+struct hiddev_field_info {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 field_index;
+	__u32 maxusage;
+	__u32 flags;
+	__u32 physical;		/* physical usage for this field */
+	__u32 logical;		/* logical usage for this field */
+	__u32 application;		/* application usage for this field */
+	__s32 logical_minimum;
+	__s32 logical_maximum;
+	__s32 physical_minimum;
+	__s32 physical_maximum;
+	__u32 unit_exponent;
+	__u32 unit;
+};
+
+/* Fill in report_type, report_id and field_index to get the information on a
+ * field.
+ */
+#define HID_FIELD_CONSTANT		0x001
+#define HID_FIELD_VARIABLE		0x002
+#define HID_FIELD_RELATIVE		0x004
+#define HID_FIELD_WRAP			0x008	
+#define HID_FIELD_NONLINEAR		0x010
+#define HID_FIELD_NO_PREFERRED		0x020
+#define HID_FIELD_NULL_STATE		0x040
+#define HID_FIELD_VOLATILE		0x080
+#define HID_FIELD_BUFFERED_BYTE		0x100
+
+struct hiddev_usage_ref {
+	__u32 report_type;
+	__u32 report_id;
+	__u32 field_index;
+	__u32 usage_index;
+	__u32 usage_code;
+	__s32 value;
+};
+
+/* hiddev_usage_ref_multi is used for sending multiple bytes to a control.
+ * It really manifests itself as setting the value of consecutive usages */
+#define HID_MAX_MULTI_USAGES 1024
+struct hiddev_usage_ref_multi {
+	struct hiddev_usage_ref uref;
+	__u32 num_values;
+	__s32 values[HID_MAX_MULTI_USAGES];
+};
+
+/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags
+ * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has
+ * been sent by the device 
+ */
+#define HID_FIELD_INDEX_NONE 0xffffffff
+
+/*
+ * Protocol version.
+ */
+
+#define HID_VERSION		0x010004
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+#define HIDIOCGVERSION		_IOR('H', 0x01, int)
+#define HIDIOCAPPLICATION	_IO('H', 0x02)
+#define HIDIOCGDEVINFO		_IOR('H', 0x03, struct hiddev_devinfo)
+#define HIDIOCGSTRING		_IOR('H', 0x04, struct hiddev_string_descriptor)
+#define HIDIOCINITREPORT	_IO('H', 0x05)
+#define HIDIOCGNAME(len)	_IOC(_IOC_READ, 'H', 0x06, len)
+#define HIDIOCGREPORT		_IOW('H', 0x07, struct hiddev_report_info)
+#define HIDIOCSREPORT		_IOW('H', 0x08, struct hiddev_report_info)
+#define HIDIOCGREPORTINFO	_IOWR('H', 0x09, struct hiddev_report_info)
+#define HIDIOCGFIELDINFO	_IOWR('H', 0x0A, struct hiddev_field_info)
+#define HIDIOCGUSAGE		_IOWR('H', 0x0B, struct hiddev_usage_ref)
+#define HIDIOCSUSAGE		_IOW('H', 0x0C, struct hiddev_usage_ref)
+#define HIDIOCGUCODE		_IOWR('H', 0x0D, struct hiddev_usage_ref)
+#define HIDIOCGFLAG		_IOR('H', 0x0E, int)
+#define HIDIOCSFLAG		_IOW('H', 0x0F, int)
+#define HIDIOCGCOLLECTIONINDEX	_IOW('H', 0x10, struct hiddev_usage_ref)
+#define HIDIOCGCOLLECTIONINFO	_IOWR('H', 0x11, struct hiddev_collection_info)
+#define HIDIOCGPHYS(len)	_IOC(_IOC_READ, 'H', 0x12, len)
+
+/* For writing/reading to multiple/consecutive usages */
+#define HIDIOCGUSAGES		_IOWR('H', 0x13, struct hiddev_usage_ref_multi)
+#define HIDIOCSUSAGES		_IOW('H', 0x14, struct hiddev_usage_ref_multi)
+
+/* 
+ * Flags to be used in HIDIOCSFLAG
+ */
+#define HIDDEV_FLAG_UREF	0x1
+#define HIDDEV_FLAG_REPORT	0x2
+#define HIDDEV_FLAGS		0x3
+
+/* To traverse the input report descriptor info for a HID device, perform the 
+ * following:
+ *
+ * rinfo.report_type = HID_REPORT_TYPE_INPUT;
+ * rinfo.report_id = HID_REPORT_ID_FIRST;
+ * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
+ *
+ * while (ret >= 0) {
+ * 	for (i = 0; i < rinfo.num_fields; i++) {
+ * 		finfo.report_type = rinfo.report_type;
+ * 		finfo.report_id = rinfo.report_id;
+ * 		finfo.field_index = i;
+ * 		ioctl(fd, HIDIOCGFIELDINFO, &finfo);
+ * 		for (j = 0; j < finfo.maxusage; j++) {
+ * 			uref.report_type = rinfo.report_type;
+ * 			uref.report_id = rinfo.report_id;
+ * 			uref.field_index = i;
+ * 			uref.usage_index = j;
+ * 			ioctl(fd, HIDIOCGUCODE, &uref);
+ * 			ioctl(fd, HIDIOCGUSAGE, &uref);
+ * 		}
+ * 	}
+ * 	rinfo.report_id |= HID_REPORT_ID_NEXT;
+ * 	ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo);
+ * }
+ */
+
+
+#endif /* _UAPI_HIDDEV_H */
diff --git a/include/uapi/linux/hidraw.h b/include/uapi/linux/hidraw.h
new file mode 100644
index 0000000..f5b7329
--- /dev/null
+++ b/include/uapi/linux/hidraw.h
@@ -0,0 +1,50 @@
+/*
+ *  Copyright (c) 2007 Jiri Kosina
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef _UAPI_HIDRAW_H
+#define _UAPI_HIDRAW_H
+
+
+
+#include <linux/hid.h>
+#include <linux/types.h>
+
+struct hidraw_report_descriptor {
+	__u32 size;
+	__u8 value[HID_MAX_DESCRIPTOR_SIZE];
+};
+
+struct hidraw_devinfo {
+	__u32 bustype;
+	__s16 vendor;
+	__s16 product;
+};
+
+/* ioctl interface */
+#define HIDIOCGRDESCSIZE	_IOR('H', 0x01, int)
+#define HIDIOCGRDESC		_IOR('H', 0x02, struct hidraw_report_descriptor)
+#define HIDIOCGRAWINFO		_IOR('H', 0x03, struct hidraw_devinfo)
+#define HIDIOCGRAWNAME(len)     _IOC(_IOC_READ, 'H', 0x04, len)
+#define HIDIOCGRAWPHYS(len)     _IOC(_IOC_READ, 'H', 0x05, len)
+/* The first byte of SFEATURE and GFEATURE is the report number */
+#define HIDIOCSFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len)
+#define HIDIOCGFEATURE(len)    _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len)
+
+#define HIDRAW_FIRST_MINOR 0
+#define HIDRAW_MAX_DEVICES 64
+/* number of reports to buffer */
+#define HIDRAW_BUFFER_SIZE 64
+
+
+/* kernel-only API declarations */
+
+#endif /* _UAPI_HIDRAW_H */
diff --git a/include/uapi/linux/hpet.h b/include/uapi/linux/hpet.h
new file mode 100644
index 0000000..8af3c70
--- /dev/null
+++ b/include/uapi/linux/hpet.h
@@ -0,0 +1,25 @@
+#ifndef _UAPI__HPET__
+#define _UAPI__HPET__
+
+#include <linux/compiler.h>
+
+
+struct hpet_info {
+	unsigned long hi_ireqfreq;	/* Hz */
+	unsigned long hi_flags;	/* information */
+	unsigned short hi_hpet;
+	unsigned short hi_timer;
+};
+
+#define HPET_INFO_PERIODIC	0x0010	/* periodic-capable comparator */
+
+#define	HPET_IE_ON	_IO('h', 0x01)	/* interrupt on */
+#define	HPET_IE_OFF	_IO('h', 0x02)	/* interrupt off */
+#define	HPET_INFO	_IOR('h', 0x03, struct hpet_info)
+#define	HPET_EPI	_IO('h', 0x04)	/* enable periodic */
+#define	HPET_DPI	_IO('h', 0x05)	/* disable periodic */
+#define	HPET_IRQFREQ	_IOW('h', 0x6, unsigned long)	/* IRQFREQ usec */
+
+#define MAX_HPET_TBS	8		/* maximum hpet timer blocks */
+
+#endif /* _UAPI__HPET__ */
diff --git a/include/linux/hysdn_if.h b/include/uapi/linux/hysdn_if.h
similarity index 100%
rename from include/linux/hysdn_if.h
rename to include/uapi/linux/hysdn_if.h
diff --git a/include/uapi/linux/i2c-dev.h b/include/uapi/linux/i2c-dev.h
new file mode 100644
index 0000000..3f31155
--- /dev/null
+++ b/include/uapi/linux/i2c-dev.h
@@ -0,0 +1,72 @@
+/*
+    i2c-dev.h - i2c-bus driver, char device interface
+
+    Copyright (C) 1995-97 Simon G. Vogl
+    Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+    MA 02110-1301 USA.
+*/
+
+#ifndef _UAPI_LINUX_I2C_DEV_H
+#define _UAPI_LINUX_I2C_DEV_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* /dev/i2c-X ioctl commands.  The ioctl's parameter is always an
+ * unsigned long, except for:
+ *	- I2C_FUNCS, takes pointer to an unsigned long
+ *	- I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
+ *	- I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
+ */
+#define I2C_RETRIES	0x0701	/* number of times a device address should
+				   be polled when not acknowledging */
+#define I2C_TIMEOUT	0x0702	/* set timeout in units of 10 ms */
+
+/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
+ * are NOT supported! (due to code brokenness)
+ */
+#define I2C_SLAVE	0x0703	/* Use this slave address */
+#define I2C_SLAVE_FORCE	0x0706	/* Use this slave address, even if it
+				   is already in use by a driver! */
+#define I2C_TENBIT	0x0704	/* 0 for 7 bit addrs, != 0 for 10 bit */
+
+#define I2C_FUNCS	0x0705	/* Get the adapter functionality mask */
+
+#define I2C_RDWR	0x0707	/* Combined R/W transfer (one STOP only) */
+
+#define I2C_PEC		0x0708	/* != 0 to use PEC with SMBus */
+#define I2C_SMBUS	0x0720	/* SMBus transfer */
+
+
+/* This is the structure as used in the I2C_SMBUS ioctl call */
+struct i2c_smbus_ioctl_data {
+	__u8 read_write;
+	__u8 command;
+	__u32 size;
+	union i2c_smbus_data __user *data;
+};
+
+/* This is the structure as used in the I2C_RDWR ioctl call */
+struct i2c_rdwr_ioctl_data {
+	struct i2c_msg __user *msgs;	/* pointers to i2c_msgs */
+	__u32 nmsgs;			/* number of i2c_msgs */
+};
+
+#define  I2C_RDRW_IOCTL_MAX_MSGS	42
+
+
+#endif /* _UAPI_LINUX_I2C_DEV_H */
diff --git a/include/uapi/linux/i2c.h b/include/uapi/linux/i2c.h
new file mode 100644
index 0000000..0e949cb
--- /dev/null
+++ b/include/uapi/linux/i2c.h
@@ -0,0 +1,151 @@
+/* ------------------------------------------------------------------------- */
+/*									     */
+/* i2c.h - definitions for the i2c-bus interface			     */
+/*									     */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 1995-2000 Simon G. Vogl
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+    MA 02110-1301 USA.							     */
+/* ------------------------------------------------------------------------- */
+
+/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
+   Frodo Looijaard <frodol@dds.nl> */
+
+#ifndef _UAPI_LINUX_I2C_H
+#define _UAPI_LINUX_I2C_H
+
+#include <linux/types.h>
+
+/**
+ * struct i2c_msg - an I2C transaction segment beginning with START
+ * @addr: Slave address, either seven or ten bits.  When this is a ten
+ *	bit address, I2C_M_TEN must be set in @flags and the adapter
+ *	must support I2C_FUNC_10BIT_ADDR.
+ * @flags: I2C_M_RD is handled by all adapters.  No other flags may be
+ *	provided unless the adapter exported the relevant I2C_FUNC_*
+ *	flags through i2c_check_functionality().
+ * @len: Number of data bytes in @buf being read from or written to the
+ *	I2C slave address.  For read transactions where I2C_M_RECV_LEN
+ *	is set, the caller guarantees that this buffer can hold up to
+ *	32 bytes in addition to the initial length byte sent by the
+ *	slave (plus, if used, the SMBus PEC); and this value will be
+ *	incremented by the number of block data bytes received.
+ * @buf: The buffer into which data is read, or from which it's written.
+ *
+ * An i2c_msg is the low level representation of one segment of an I2C
+ * transaction.  It is visible to drivers in the @i2c_transfer() procedure,
+ * to userspace from i2c-dev, and to I2C adapter drivers through the
+ * @i2c_adapter.@master_xfer() method.
+ *
+ * Except when I2C "protocol mangling" is used, all I2C adapters implement
+ * the standard rules for I2C transactions.  Each transaction begins with a
+ * START.  That is followed by the slave address, and a bit encoding read
+ * versus write.  Then follow all the data bytes, possibly including a byte
+ * with SMBus PEC.  The transfer terminates with a NAK, or when all those
+ * bytes have been transferred and ACKed.  If this is the last message in a
+ * group, it is followed by a STOP.  Otherwise it is followed by the next
+ * @i2c_msg transaction segment, beginning with a (repeated) START.
+ *
+ * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then
+ * passing certain @flags may have changed those standard protocol behaviors.
+ * Those flags are only for use with broken/nonconforming slaves, and with
+ * adapters which are known to support the specific mangling options they
+ * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR).
+ */
+struct i2c_msg {
+	__u16 addr;	/* slave address			*/
+	__u16 flags;
+#define I2C_M_TEN		0x0010	/* this is a ten bit chip address */
+#define I2C_M_RD		0x0001	/* read data, from slave to master */
+#define I2C_M_STOP		0x8000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NOSTART		0x4000	/* if I2C_FUNC_NOSTART */
+#define I2C_M_REV_DIR_ADDR	0x2000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_IGNORE_NAK	0x1000	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_NO_RD_ACK		0x0800	/* if I2C_FUNC_PROTOCOL_MANGLING */
+#define I2C_M_RECV_LEN		0x0400	/* length will be first received byte */
+	__u16 len;		/* msg length				*/
+	__u8 *buf;		/* pointer to msg data			*/
+};
+
+/* To determine what functionality is present */
+
+#define I2C_FUNC_I2C			0x00000001
+#define I2C_FUNC_10BIT_ADDR		0x00000002
+#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_IGNORE_NAK etc. */
+#define I2C_FUNC_SMBUS_PEC		0x00000008
+#define I2C_FUNC_NOSTART		0x00000010 /* I2C_M_NOSTART */
+#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_QUICK		0x00010000
+#define I2C_FUNC_SMBUS_READ_BYTE	0x00020000
+#define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA	0x00080000
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA	0x00100000
+#define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000
+#define I2C_FUNC_SMBUS_PROC_CALL	0x00800000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
+#define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
+#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
+
+#define I2C_FUNC_SMBUS_BYTE		(I2C_FUNC_SMBUS_READ_BYTE | \
+					 I2C_FUNC_SMBUS_WRITE_BYTE)
+#define I2C_FUNC_SMBUS_BYTE_DATA	(I2C_FUNC_SMBUS_READ_BYTE_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
+#define I2C_FUNC_SMBUS_WORD_DATA	(I2C_FUNC_SMBUS_READ_WORD_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_WORD_DATA)
+#define I2C_FUNC_SMBUS_BLOCK_DATA	(I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
+#define I2C_FUNC_SMBUS_I2C_BLOCK	(I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
+					 I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
+
+#define I2C_FUNC_SMBUS_EMUL		(I2C_FUNC_SMBUS_QUICK | \
+					 I2C_FUNC_SMBUS_BYTE | \
+					 I2C_FUNC_SMBUS_BYTE_DATA | \
+					 I2C_FUNC_SMBUS_WORD_DATA | \
+					 I2C_FUNC_SMBUS_PROC_CALL | \
+					 I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
+					 I2C_FUNC_SMBUS_I2C_BLOCK | \
+					 I2C_FUNC_SMBUS_PEC)
+
+/*
+ * Data for SMBus Messages
+ */
+#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */
+union i2c_smbus_data {
+	__u8 byte;
+	__u16 word;
+	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
+			       /* and one more for user-space compatibility */
+};
+
+/* i2c_smbus_xfer read or write markers */
+#define I2C_SMBUS_READ	1
+#define I2C_SMBUS_WRITE	0
+
+/* SMBus transaction types (size parameter in the above functions)
+   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
+#define I2C_SMBUS_QUICK		    0
+#define I2C_SMBUS_BYTE		    1
+#define I2C_SMBUS_BYTE_DATA	    2
+#define I2C_SMBUS_WORD_DATA	    3
+#define I2C_SMBUS_PROC_CALL	    4
+#define I2C_SMBUS_BLOCK_DATA	    5
+#define I2C_SMBUS_I2C_BLOCK_BROKEN  6
+#define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
+#define I2C_SMBUS_I2C_BLOCK_DATA    8
+
+#endif /* _UAPI_LINUX_I2C_H */
diff --git a/include/linux/i2o-dev.h b/include/uapi/linux/i2o-dev.h
similarity index 100%
rename from include/linux/i2o-dev.h
rename to include/uapi/linux/i2o-dev.h
diff --git a/include/linux/i8k.h b/include/uapi/linux/i8k.h
similarity index 100%
rename from include/linux/i8k.h
rename to include/uapi/linux/i8k.h
diff --git a/include/uapi/linux/icmp.h b/include/uapi/linux/icmp.h
new file mode 100644
index 0000000..16fff05
--- /dev/null
+++ b/include/uapi/linux/icmp.h
@@ -0,0 +1,97 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the ICMP protocol.
+ *
+ * Version:	@(#)icmp.h	1.0.3	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_ICMP_H
+#define _UAPI_LINUX_ICMP_H
+
+#include <linux/types.h>
+
+#define ICMP_ECHOREPLY		0	/* Echo Reply			*/
+#define ICMP_DEST_UNREACH	3	/* Destination Unreachable	*/
+#define ICMP_SOURCE_QUENCH	4	/* Source Quench		*/
+#define ICMP_REDIRECT		5	/* Redirect (change route)	*/
+#define ICMP_ECHO		8	/* Echo Request			*/
+#define ICMP_TIME_EXCEEDED	11	/* Time Exceeded		*/
+#define ICMP_PARAMETERPROB	12	/* Parameter Problem		*/
+#define ICMP_TIMESTAMP		13	/* Timestamp Request		*/
+#define ICMP_TIMESTAMPREPLY	14	/* Timestamp Reply		*/
+#define ICMP_INFO_REQUEST	15	/* Information Request		*/
+#define ICMP_INFO_REPLY		16	/* Information Reply		*/
+#define ICMP_ADDRESS		17	/* Address Mask Request		*/
+#define ICMP_ADDRESSREPLY	18	/* Address Mask Reply		*/
+#define NR_ICMP_TYPES		18
+
+
+/* Codes for UNREACH. */
+#define ICMP_NET_UNREACH	0	/* Network Unreachable		*/
+#define ICMP_HOST_UNREACH	1	/* Host Unreachable		*/
+#define ICMP_PROT_UNREACH	2	/* Protocol Unreachable		*/
+#define ICMP_PORT_UNREACH	3	/* Port Unreachable		*/
+#define ICMP_FRAG_NEEDED	4	/* Fragmentation Needed/DF set	*/
+#define ICMP_SR_FAILED		5	/* Source Route failed		*/
+#define ICMP_NET_UNKNOWN	6
+#define ICMP_HOST_UNKNOWN	7
+#define ICMP_HOST_ISOLATED	8
+#define ICMP_NET_ANO		9
+#define ICMP_HOST_ANO		10
+#define ICMP_NET_UNR_TOS	11
+#define ICMP_HOST_UNR_TOS	12
+#define ICMP_PKT_FILTERED	13	/* Packet filtered */
+#define ICMP_PREC_VIOLATION	14	/* Precedence violation */
+#define ICMP_PREC_CUTOFF	15	/* Precedence cut off */
+#define NR_ICMP_UNREACH		15	/* instead of hardcoding immediate value */
+
+/* Codes for REDIRECT. */
+#define ICMP_REDIR_NET		0	/* Redirect Net			*/
+#define ICMP_REDIR_HOST		1	/* Redirect Host		*/
+#define ICMP_REDIR_NETTOS	2	/* Redirect Net for TOS		*/
+#define ICMP_REDIR_HOSTTOS	3	/* Redirect Host for TOS	*/
+
+/* Codes for TIME_EXCEEDED. */
+#define ICMP_EXC_TTL		0	/* TTL count exceeded		*/
+#define ICMP_EXC_FRAGTIME	1	/* Fragment Reass time exceeded	*/
+
+
+struct icmphdr {
+  __u8		type;
+  __u8		code;
+  __sum16	checksum;
+  union {
+	struct {
+		__be16	id;
+		__be16	sequence;
+	} echo;
+	__be32	gateway;
+	struct {
+		__be16	__unused;
+		__be16	mtu;
+	} frag;
+  } un;
+};
+
+
+/*
+ *	constants for (set|get)sockopt
+ */
+
+#define ICMP_FILTER			1
+
+struct icmp_filter {
+	__u32		data;
+};
+
+
+#endif /* _UAPI_LINUX_ICMP_H */
diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h
new file mode 100644
index 0000000..e0133c7
--- /dev/null
+++ b/include/uapi/linux/icmpv6.h
@@ -0,0 +1,164 @@
+#ifndef _UAPI_LINUX_ICMPV6_H
+#define _UAPI_LINUX_ICMPV6_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+struct icmp6hdr {
+
+	__u8		icmp6_type;
+	__u8		icmp6_code;
+	__sum16		icmp6_cksum;
+
+
+	union {
+		__be32			un_data32[1];
+		__be16			un_data16[2];
+		__u8			un_data8[4];
+
+		struct icmpv6_echo {
+			__be16		identifier;
+			__be16		sequence;
+		} u_echo;
+
+                struct icmpv6_nd_advt {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+                        __u32		reserved:5,
+                        		override:1,
+                        		solicited:1,
+                        		router:1,
+					reserved2:24;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+                        __u32		router:1,
+					solicited:1,
+                        		override:1,
+                        		reserved:29;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif						
+                } u_nd_advt;
+
+                struct icmpv6_nd_ra {
+			__u8		hop_limit;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+			__u8		reserved:3,
+					router_pref:2,
+					home_agent:1,
+					other:1,
+					managed:1;
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+			__u8		managed:1,
+					other:1,
+					home_agent:1,
+					router_pref:2,
+					reserved:3;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+			__be16		rt_lifetime;
+                } u_nd_ra;
+
+	} icmp6_dataun;
+
+#define icmp6_identifier	icmp6_dataun.u_echo.identifier
+#define icmp6_sequence		icmp6_dataun.u_echo.sequence
+#define icmp6_pointer		icmp6_dataun.un_data32[0]
+#define icmp6_mtu		icmp6_dataun.un_data32[0]
+#define icmp6_unused		icmp6_dataun.un_data32[0]
+#define icmp6_maxdelay		icmp6_dataun.un_data16[0]
+#define icmp6_router		icmp6_dataun.u_nd_advt.router
+#define icmp6_solicited		icmp6_dataun.u_nd_advt.solicited
+#define icmp6_override		icmp6_dataun.u_nd_advt.override
+#define icmp6_ndiscreserved	icmp6_dataun.u_nd_advt.reserved
+#define icmp6_hop_limit		icmp6_dataun.u_nd_ra.hop_limit
+#define icmp6_addrconf_managed	icmp6_dataun.u_nd_ra.managed
+#define icmp6_addrconf_other	icmp6_dataun.u_nd_ra.other
+#define icmp6_rt_lifetime	icmp6_dataun.u_nd_ra.rt_lifetime
+#define icmp6_router_pref	icmp6_dataun.u_nd_ra.router_pref
+};
+
+
+#define ICMPV6_ROUTER_PREF_LOW		0x3
+#define ICMPV6_ROUTER_PREF_MEDIUM	0x0
+#define ICMPV6_ROUTER_PREF_HIGH		0x1
+#define ICMPV6_ROUTER_PREF_INVALID	0x2
+
+#define ICMPV6_DEST_UNREACH		1
+#define ICMPV6_PKT_TOOBIG		2
+#define ICMPV6_TIME_EXCEED		3
+#define ICMPV6_PARAMPROB		4
+
+#define ICMPV6_INFOMSG_MASK		0x80
+
+#define ICMPV6_ECHO_REQUEST		128
+#define ICMPV6_ECHO_REPLY		129
+#define ICMPV6_MGM_QUERY		130
+#define ICMPV6_MGM_REPORT       	131
+#define ICMPV6_MGM_REDUCTION    	132
+
+#define ICMPV6_NI_QUERY			139
+#define ICMPV6_NI_REPLY			140
+
+#define ICMPV6_MLD2_REPORT		143
+
+#define ICMPV6_DHAAD_REQUEST		144
+#define ICMPV6_DHAAD_REPLY		145
+#define ICMPV6_MOBILE_PREFIX_SOL	146
+#define ICMPV6_MOBILE_PREFIX_ADV	147
+
+/*
+ *	Codes for Destination Unreachable
+ */
+#define ICMPV6_NOROUTE			0
+#define ICMPV6_ADM_PROHIBITED		1
+#define ICMPV6_NOT_NEIGHBOUR		2
+#define ICMPV6_ADDR_UNREACH		3
+#define ICMPV6_PORT_UNREACH		4
+
+/*
+ *	Codes for Time Exceeded
+ */
+#define ICMPV6_EXC_HOPLIMIT		0
+#define ICMPV6_EXC_FRAGTIME		1
+
+/*
+ *	Codes for Parameter Problem
+ */
+#define ICMPV6_HDR_FIELD		0
+#define ICMPV6_UNK_NEXTHDR		1
+#define ICMPV6_UNK_OPTION		2
+
+/*
+ *	constants for (set|get)sockopt
+ */
+
+#define ICMPV6_FILTER			1
+
+/*
+ *	ICMPV6 filter
+ */
+
+#define ICMPV6_FILTER_BLOCK		1
+#define ICMPV6_FILTER_PASS		2
+#define ICMPV6_FILTER_BLOCKOTHERS	3
+#define ICMPV6_FILTER_PASSONLY		4
+
+struct icmp6_filter {
+	__u32		data[8];
+};
+
+/*
+ *	Definitions for MLDv2
+ */
+#define MLD2_MODE_IS_INCLUDE	1
+#define MLD2_MODE_IS_EXCLUDE	2
+#define MLD2_CHANGE_TO_INCLUDE	3
+#define MLD2_CHANGE_TO_EXCLUDE	4
+#define MLD2_ALLOW_NEW_SOURCES	5
+#define MLD2_BLOCK_OLD_SOURCES	6
+
+#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } }
+
+
+#endif /* _UAPI_LINUX_ICMPV6_H */
diff --git a/include/linux/if.h b/include/uapi/linux/if.h
similarity index 100%
rename from include/linux/if.h
rename to include/uapi/linux/if.h
diff --git a/include/linux/if_addr.h b/include/uapi/linux/if_addr.h
similarity index 100%
rename from include/linux/if_addr.h
rename to include/uapi/linux/if_addr.h
diff --git a/include/linux/if_addrlabel.h b/include/uapi/linux/if_addrlabel.h
similarity index 100%
rename from include/linux/if_addrlabel.h
rename to include/uapi/linux/if_addrlabel.h
diff --git a/include/linux/if_alg.h b/include/uapi/linux/if_alg.h
similarity index 100%
rename from include/linux/if_alg.h
rename to include/uapi/linux/if_alg.h
diff --git a/include/linux/if_arcnet.h b/include/uapi/linux/if_arcnet.h
similarity index 100%
rename from include/linux/if_arcnet.h
rename to include/uapi/linux/if_arcnet.h
diff --git a/include/uapi/linux/if_arp.h b/include/uapi/linux/if_arp.h
new file mode 100644
index 0000000..82c7d1b
--- /dev/null
+++ b/include/uapi/linux/if_arp.h
@@ -0,0 +1,159 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the ARP (RFC 826) protocol.
+ *
+ * Version:	@(#)if_arp.h	1.0.1	04/16/93
+ *
+ * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1986-1988
+ *		Portions taken from the KA9Q/NOS (v2.00m PA0GRI) source.
+ *		Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Florian La Roche,
+ *		Jonathan Layes <layes@loran.com>
+ *		Arnaldo Carvalho de Melo <acme@conectiva.com.br> ARPHRD_HWX25
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IF_ARP_H
+#define _UAPI_LINUX_IF_ARP_H
+
+#include <linux/netdevice.h>
+
+/* ARP protocol HARDWARE identifiers. */
+#define ARPHRD_NETROM	0		/* from KA9Q: NET/ROM pseudo	*/
+#define ARPHRD_ETHER 	1		/* Ethernet 10Mbps		*/
+#define	ARPHRD_EETHER	2		/* Experimental Ethernet	*/
+#define	ARPHRD_AX25	3		/* AX.25 Level 2		*/
+#define	ARPHRD_PRONET	4		/* PROnet token ring		*/
+#define	ARPHRD_CHAOS	5		/* Chaosnet			*/
+#define	ARPHRD_IEEE802	6		/* IEEE 802.2 Ethernet/TR/TB	*/
+#define	ARPHRD_ARCNET	7		/* ARCnet			*/
+#define	ARPHRD_APPLETLK	8		/* APPLEtalk			*/
+#define ARPHRD_DLCI	15		/* Frame Relay DLCI		*/
+#define ARPHRD_ATM	19		/* ATM 				*/
+#define ARPHRD_METRICOM	23		/* Metricom STRIP (new IANA id)	*/
+#define	ARPHRD_IEEE1394	24		/* IEEE 1394 IPv4 - RFC 2734	*/
+#define ARPHRD_EUI64	27		/* EUI-64                       */
+#define ARPHRD_INFINIBAND 32		/* InfiniBand			*/
+
+/* Dummy types for non ARP hardware */
+#define ARPHRD_SLIP	256
+#define ARPHRD_CSLIP	257
+#define ARPHRD_SLIP6	258
+#define ARPHRD_CSLIP6	259
+#define ARPHRD_RSRVD	260		/* Notional KISS type 		*/
+#define ARPHRD_ADAPT	264
+#define ARPHRD_ROSE	270
+#define ARPHRD_X25	271		/* CCITT X.25			*/
+#define ARPHRD_HWX25	272		/* Boards with X.25 in firmware	*/
+#define ARPHRD_CAN	280		/* Controller Area Network      */
+#define ARPHRD_PPP	512
+#define ARPHRD_CISCO	513		/* Cisco HDLC	 		*/
+#define ARPHRD_HDLC	ARPHRD_CISCO
+#define ARPHRD_LAPB	516		/* LAPB				*/
+#define ARPHRD_DDCMP    517		/* Digital's DDCMP protocol     */
+#define ARPHRD_RAWHDLC	518		/* Raw HDLC			*/
+
+#define ARPHRD_TUNNEL	768		/* IPIP tunnel			*/
+#define ARPHRD_TUNNEL6	769		/* IP6IP6 tunnel       		*/
+#define ARPHRD_FRAD	770             /* Frame Relay Access Device    */
+#define ARPHRD_SKIP	771		/* SKIP vif			*/
+#define ARPHRD_LOOPBACK	772		/* Loopback device		*/
+#define ARPHRD_LOCALTLK 773		/* Localtalk device		*/
+#define ARPHRD_FDDI	774		/* Fiber Distributed Data Interface */
+#define ARPHRD_BIF      775             /* AP1000 BIF                   */
+#define ARPHRD_SIT	776		/* sit0 device - IPv6-in-IPv4	*/
+#define ARPHRD_IPDDP	777		/* IP over DDP tunneller	*/
+#define ARPHRD_IPGRE	778		/* GRE over IP			*/
+#define ARPHRD_PIMREG	779		/* PIMSM register interface	*/
+#define ARPHRD_HIPPI	780		/* High Performance Parallel Interface */
+#define ARPHRD_ASH	781		/* Nexus 64Mbps Ash		*/
+#define ARPHRD_ECONET	782		/* Acorn Econet			*/
+#define ARPHRD_IRDA 	783		/* Linux-IrDA			*/
+/* ARP works differently on different FC media .. so  */
+#define ARPHRD_FCPP	784		/* Point to point fibrechannel	*/
+#define ARPHRD_FCAL	785		/* Fibrechannel arbitrated loop */
+#define ARPHRD_FCPL	786		/* Fibrechannel public loop	*/
+#define ARPHRD_FCFABRIC	787		/* Fibrechannel fabric		*/
+	/* 787->799 reserved for fibrechannel media types */
+#define ARPHRD_IEEE802_TR 800		/* Magic type ident for TR	*/
+#define ARPHRD_IEEE80211 801		/* IEEE 802.11			*/
+#define ARPHRD_IEEE80211_PRISM 802	/* IEEE 802.11 + Prism2 header  */
+#define ARPHRD_IEEE80211_RADIOTAP 803	/* IEEE 802.11 + radiotap header */
+#define ARPHRD_IEEE802154	  804
+#define ARPHRD_IEEE802154_MONITOR 805	/* IEEE 802.15.4 network monitor */
+
+#define ARPHRD_PHONET	820		/* PhoNet media type		*/
+#define ARPHRD_PHONET_PIPE 821		/* PhoNet pipe header		*/
+#define ARPHRD_CAIF	822		/* CAIF media type		*/
+#define ARPHRD_IP6GRE	823		/* GRE over IPv6		*/
+
+#define ARPHRD_VOID	  0xFFFF	/* Void type, nothing is known */
+#define ARPHRD_NONE	  0xFFFE	/* zero header length */
+
+/* ARP protocol opcodes. */
+#define	ARPOP_REQUEST	1		/* ARP request			*/
+#define	ARPOP_REPLY	2		/* ARP reply			*/
+#define	ARPOP_RREQUEST	3		/* RARP request			*/
+#define	ARPOP_RREPLY	4		/* RARP reply			*/
+#define	ARPOP_InREQUEST	8		/* InARP request		*/
+#define	ARPOP_InREPLY	9		/* InARP reply			*/
+#define	ARPOP_NAK	10		/* (ATM)ARP NAK			*/
+
+
+/* ARP ioctl request. */
+struct arpreq {
+  struct sockaddr	arp_pa;		/* protocol address		*/
+  struct sockaddr	arp_ha;		/* hardware address		*/
+  int			arp_flags;	/* flags			*/
+  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
+  char			arp_dev[16];
+};
+
+struct arpreq_old {
+  struct sockaddr	arp_pa;		/* protocol address		*/
+  struct sockaddr	arp_ha;		/* hardware address		*/
+  int			arp_flags;	/* flags			*/
+  struct sockaddr       arp_netmask;    /* netmask (only for proxy arps) */
+};
+
+/* ARP Flag values. */
+#define ATF_COM		0x02		/* completed entry (ha valid)	*/
+#define	ATF_PERM	0x04		/* permanent entry		*/
+#define	ATF_PUBL	0x08		/* publish entry		*/
+#define	ATF_USETRAILERS	0x10		/* has requested trailers	*/
+#define ATF_NETMASK     0x20            /* want to use a netmask (only
+					   for proxy entries) */
+#define ATF_DONTPUB	0x40		/* don't answer this addresses	*/
+
+/*
+ *	This structure defines an ethernet arp header.
+ */
+
+struct arphdr {
+	__be16		ar_hrd;		/* format of hardware address	*/
+	__be16		ar_pro;		/* format of protocol address	*/
+	unsigned char	ar_hln;		/* length of hardware address	*/
+	unsigned char	ar_pln;		/* length of protocol address	*/
+	__be16		ar_op;		/* ARP opcode (command)		*/
+
+#if 0
+	 /*
+	  *	 Ethernet looks like this : This bit is variable sized however...
+	  */
+	unsigned char		ar_sha[ETH_ALEN];	/* sender hardware address	*/
+	unsigned char		ar_sip[4];		/* sender IP address		*/
+	unsigned char		ar_tha[ETH_ALEN];	/* target hardware address	*/
+	unsigned char		ar_tip[4];		/* target IP address		*/
+#endif
+
+};
+
+
+#endif /* _UAPI_LINUX_IF_ARP_H */
diff --git a/include/linux/if_bonding.h b/include/uapi/linux/if_bonding.h
similarity index 100%
rename from include/linux/if_bonding.h
rename to include/uapi/linux/if_bonding.h
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
new file mode 100644
index 0000000..a8fe954
--- /dev/null
+++ b/include/uapi/linux/if_bridge.h
@@ -0,0 +1,101 @@
+/*
+ *	Linux ethernet bridge
+ *
+ *	Authors:
+ *	Lennert Buytenhek		<buytenh@gnu.org>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IF_BRIDGE_H
+#define _UAPI_LINUX_IF_BRIDGE_H
+
+#include <linux/types.h>
+
+#define SYSFS_BRIDGE_ATTR	"bridge"
+#define SYSFS_BRIDGE_FDB	"brforward"
+#define SYSFS_BRIDGE_PORT_SUBDIR "brif"
+#define SYSFS_BRIDGE_PORT_ATTR	"brport"
+#define SYSFS_BRIDGE_PORT_LINK	"bridge"
+
+#define BRCTL_VERSION 1
+
+#define BRCTL_GET_VERSION 0
+#define BRCTL_GET_BRIDGES 1
+#define BRCTL_ADD_BRIDGE 2
+#define BRCTL_DEL_BRIDGE 3
+#define BRCTL_ADD_IF 4
+#define BRCTL_DEL_IF 5
+#define BRCTL_GET_BRIDGE_INFO 6
+#define BRCTL_GET_PORT_LIST 7
+#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8
+#define BRCTL_SET_BRIDGE_HELLO_TIME 9
+#define BRCTL_SET_BRIDGE_MAX_AGE 10
+#define BRCTL_SET_AGEING_TIME 11
+#define BRCTL_SET_GC_INTERVAL 12
+#define BRCTL_GET_PORT_INFO 13
+#define BRCTL_SET_BRIDGE_STP_STATE 14
+#define BRCTL_SET_BRIDGE_PRIORITY 15
+#define BRCTL_SET_PORT_PRIORITY 16
+#define BRCTL_SET_PATH_COST 17
+#define BRCTL_GET_FDB_ENTRIES 18
+
+#define BR_STATE_DISABLED 0
+#define BR_STATE_LISTENING 1
+#define BR_STATE_LEARNING 2
+#define BR_STATE_FORWARDING 3
+#define BR_STATE_BLOCKING 4
+
+struct __bridge_info {
+	__u64 designated_root;
+	__u64 bridge_id;
+	__u32 root_path_cost;
+	__u32 max_age;
+	__u32 hello_time;
+	__u32 forward_delay;
+	__u32 bridge_max_age;
+	__u32 bridge_hello_time;
+	__u32 bridge_forward_delay;
+	__u8 topology_change;
+	__u8 topology_change_detected;
+	__u8 root_port;
+	__u8 stp_enabled;
+	__u32 ageing_time;
+	__u32 gc_interval;
+	__u32 hello_timer_value;
+	__u32 tcn_timer_value;
+	__u32 topology_change_timer_value;
+	__u32 gc_timer_value;
+};
+
+struct __port_info {
+	__u64 designated_root;
+	__u64 designated_bridge;
+	__u16 port_id;
+	__u16 designated_port;
+	__u32 path_cost;
+	__u32 designated_cost;
+	__u8 state;
+	__u8 top_change_ack;
+	__u8 config_pending;
+	__u8 unused0;
+	__u32 message_age_timer_value;
+	__u32 forward_delay_timer_value;
+	__u32 hold_timer_value;
+};
+
+struct __fdb_entry {
+	__u8 mac_addr[6];
+	__u8 port_no;
+	__u8 is_local;
+	__u32 ageing_timer_value;
+	__u8 port_hi;
+	__u8 pad0;
+	__u16 unused;
+};
+
+
+#endif /* _UAPI_LINUX_IF_BRIDGE_H */
diff --git a/include/linux/if_cablemodem.h b/include/uapi/linux/if_cablemodem.h
similarity index 100%
rename from include/linux/if_cablemodem.h
rename to include/uapi/linux/if_cablemodem.h
diff --git a/include/uapi/linux/if_eql.h b/include/uapi/linux/if_eql.h
new file mode 100644
index 0000000..06e818c
--- /dev/null
+++ b/include/uapi/linux/if_eql.h
@@ -0,0 +1,54 @@
+/*
+ * Equalizer Load-balancer for serial network interfaces.
+ *
+ * (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
+ * NCM: Network and Communications Management, Inc.
+ *
+ *
+ *	This software may be used and distributed according to the terms
+ *	of the GNU General Public License, incorporated herein by reference.
+ * 
+ * The author may be reached as simon@ncm.com, or C/O
+ *    NCM
+ *    Attn: Simon Janes
+ *    6803 Whittier Ave
+ *    McLean VA 22101
+ *    Phone: 1-703-847-0040 ext 103
+ */
+
+#ifndef _UAPI_LINUX_IF_EQL_H
+#define _UAPI_LINUX_IF_EQL_H
+
+#define EQL_DEFAULT_SLAVE_PRIORITY 28800
+#define EQL_DEFAULT_MAX_SLAVES     4
+#define EQL_DEFAULT_MTU            576
+#define EQL_DEFAULT_RESCHED_IVAL   HZ
+
+#define EQL_ENSLAVE     (SIOCDEVPRIVATE)
+#define EQL_EMANCIPATE  (SIOCDEVPRIVATE + 1)
+
+#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2)
+#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3)
+
+#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4)
+#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5)
+
+
+typedef struct master_config {
+	char	master_name[16];
+	int	max_slaves;
+	int	min_slaves;
+} master_config_t;
+
+typedef struct slave_config {
+	char	slave_name[16];
+	long	priority;
+} slave_config_t;
+
+typedef struct slaving_request {
+	char	slave_name[16];
+	long	priority;
+} slaving_request_t;
+
+
+#endif /* _UAPI_LINUX_IF_EQL_H */
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
new file mode 100644
index 0000000..0343e1f
--- /dev/null
+++ b/include/uapi/linux/if_ether.h
@@ -0,0 +1,135 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Ethernet IEEE 802.3 interface.
+ *
+ * Version:	@(#)if_ether.h	1.0.1a	02/08/94
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Donald Becker, <becker@super.org>
+ *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *		Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IF_ETHER_H
+#define _UAPI_LINUX_IF_ETHER_H
+
+#include <linux/types.h>
+
+/*
+ *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
+ *	and FCS/CRC (frame check sequence).
+ */
+
+#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
+#define ETH_HLEN	14		/* Total octets in header.	 */
+#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
+#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
+#define ETH_FCS_LEN	4		/* Octets in the FCS		 */
+
+/*
+ *	These are the defined Ethernet Protocol ID's.
+ */
+
+#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
+#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
+#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
+#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
+#define ETH_P_X25	0x0805		/* CCITT X.25			*/
+#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
+#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet	[ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet */
+#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP Addr Trans packet */
+#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
+#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
+#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
+#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
+#define ETH_P_LAT       0x6004          /* DEC LAT                      */
+#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
+#define ETH_P_CUST      0x6006          /* DEC Customer use             */
+#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
+#define ETH_P_TEB	0x6558		/* Trans Ether Bridging		*/
+#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
+#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
+#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
+#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
+#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
+#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
+#define ETH_P_PAUSE	0x8808		/* IEEE Pause frames. See 802.3 31B */
+#define ETH_P_SLOW	0x8809		/* Slow Protocol. See 802.3ad 43B */
+#define ETH_P_WCCP	0x883E		/* Web-cache coordination protocol
+					 * defined in draft-wilson-wrec-wccp-v2-00.txt */
+#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
+#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
+#define ETH_P_MPLS_UC	0x8847		/* MPLS Unicast traffic		*/
+#define ETH_P_MPLS_MC	0x8848		/* MPLS Multicast traffic	*/
+#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
+#define ETH_P_LINK_CTL	0x886c		/* HPNA, wlan link local tunnel */
+#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
+					 * over Ethernet
+					 */
+#define ETH_P_PAE	0x888E		/* Port Access Entity (IEEE 802.1X) */
+#define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
+#define ETH_P_8021AD	0x88A8          /* 802.1ad Service VLAN		*/
+#define ETH_P_802_EX1	0x88B5		/* 802.1 Local Experimental 1.  */
+#define ETH_P_TIPC	0x88CA		/* TIPC 			*/
+#define ETH_P_8021AH	0x88E7          /* 802.1ah Backbone Service Tag */
+#define ETH_P_1588	0x88F7		/* IEEE 1588 Timesync */
+#define ETH_P_FCOE	0x8906		/* Fibre Channel over Ethernet  */
+#define ETH_P_TDLS	0x890D          /* TDLS */
+#define ETH_P_FIP	0x8914		/* FCoE Initialization Protocol */
+#define ETH_P_QINQ1	0x9100		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_QINQ2	0x9200		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_QINQ3	0x9300		/* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_EDSA	0xDADA		/* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_AF_IUCV   0xFBFB		/* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
+
+/*
+ *	Non DIX types. Won't clash for 1500 types.
+ */
+
+#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
+#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
+#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
+#define ETH_P_802_2	0x0004		/* 802.2 frames 		*/
+#define ETH_P_SNAP	0x0005		/* Internal only		*/
+#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
+#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
+#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
+#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type 	*/
+#define ETH_P_CAN	0x000C		/* CAN: Controller Area Network */
+#define ETH_P_CANFD	0x000D		/* CANFD: CAN flexible data rate*/
+#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
+#define ETH_P_TR_802_2	0x0011		/* 802.2 frames 		*/
+#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
+#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
+#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
+#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
+#define ETH_P_HDLC	0x0019		/* HDLC frames			*/
+#define ETH_P_ARCNET	0x001A		/* 1A for ArcNet :-)            */
+#define ETH_P_DSA	0x001B		/* Distributed Switch Arch.	*/
+#define ETH_P_TRAILER	0x001C		/* Trailer switch tagging	*/
+#define ETH_P_PHONET	0x00F5		/* Nokia Phonet frames          */
+#define ETH_P_IEEE802154 0x00F6		/* IEEE802.15.4 frame		*/
+#define ETH_P_CAIF	0x00F7		/* ST-Ericsson CAIF protocol	*/
+
+/*
+ *	This is an Ethernet frame header.
+ */
+
+struct ethhdr {
+	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
+	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
+	__be16		h_proto;		/* packet type ID field	*/
+} __attribute__((packed));
+
+
+#endif /* _UAPI_LINUX_IF_ETHER_H */
diff --git a/include/linux/if_fc.h b/include/uapi/linux/if_fc.h
similarity index 100%
rename from include/linux/if_fc.h
rename to include/uapi/linux/if_fc.h
diff --git a/include/uapi/linux/if_fddi.h b/include/uapi/linux/if_fddi.h
new file mode 100644
index 0000000..0d36909
--- /dev/null
+++ b/include/uapi/linux/if_fddi.h
@@ -0,0 +1,104 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the ANSI FDDI interface.
+ *
+ * Version:	@(#)if_fddi.h	1.0.2	Sep 29 2004
+ *
+ * Author:	Lawrence V. Stefani, <stefani@lkg.dec.com>
+ *
+ *		if_fddi.h is based on previous if_ether.h and if_tr.h work by
+ *			Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *			Donald Becker, <becker@super.org>
+ *			Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *			Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
+ *			Peter De Schrijver, <stud11@cc4.kuleuven.ac.be>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IF_FDDI_H
+#define _UAPI_LINUX_IF_FDDI_H
+
+#include <linux/types.h>
+
+/*
+ *  Define max and min legal sizes.  The frame sizes do not include
+ *  4 byte FCS/CRC (frame check sequence).
+ */
+#define FDDI_K_ALEN			6		/* Octets in one FDDI address */
+#define FDDI_K_8022_HLEN	16		/* Total octets in 802.2 header */
+#define FDDI_K_SNAP_HLEN	21		/* Total octets in 802.2 SNAP header */
+#define FDDI_K_8022_ZLEN	16		/* Min octets in 802.2 frame sans FCS */
+#define FDDI_K_SNAP_ZLEN	21		/* Min octets in 802.2 SNAP frame sans FCS */
+#define FDDI_K_8022_DLEN	4475	/* Max octets in 802.2 payload */
+#define FDDI_K_SNAP_DLEN	4470	/* Max octets in 802.2 SNAP payload */
+#define FDDI_K_LLC_ZLEN		13		/* Min octets in LLC frame sans FCS */
+#define FDDI_K_LLC_LEN		4491	/* Max octets in LLC frame sans FCS */
+
+/* Define FDDI Frame Control (FC) Byte values */
+#define FDDI_FC_K_VOID					0x00	
+#define FDDI_FC_K_NON_RESTRICTED_TOKEN	0x80	
+#define FDDI_FC_K_RESTRICTED_TOKEN		0xC0	
+#define FDDI_FC_K_SMT_MIN				0x41
+#define FDDI_FC_K_SMT_MAX		   		0x4F
+#define FDDI_FC_K_MAC_MIN				0xC1
+#define FDDI_FC_K_MAC_MAX		  		0xCF	
+#define FDDI_FC_K_ASYNC_LLC_MIN			0x50
+#define FDDI_FC_K_ASYNC_LLC_DEF			0x54
+#define FDDI_FC_K_ASYNC_LLC_MAX			0x5F
+#define FDDI_FC_K_SYNC_LLC_MIN			0xD0
+#define FDDI_FC_K_SYNC_LLC_MAX			0xD7
+#define FDDI_FC_K_IMPLEMENTOR_MIN		0x60
+#define FDDI_FC_K_IMPLEMENTOR_MAX  		0x6F
+#define FDDI_FC_K_RESERVED_MIN			0x70
+#define FDDI_FC_K_RESERVED_MAX			0x7F
+
+/* Define LLC and SNAP constants */
+#define FDDI_EXTENDED_SAP	0xAA
+#define FDDI_UI_CMD			0x03
+
+/* Define 802.2 Type 1 header */
+struct fddi_8022_1_hdr {
+	__u8	dsap;					/* destination service access point */
+	__u8	ssap;					/* source service access point */
+	__u8	ctrl;					/* control byte #1 */
+} __attribute__((packed));
+
+/* Define 802.2 Type 2 header */
+struct fddi_8022_2_hdr {
+	__u8	dsap;					/* destination service access point */
+	__u8	ssap;					/* source service access point */
+	__u8	ctrl_1;					/* control byte #1 */
+	__u8	ctrl_2;					/* control byte #2 */
+} __attribute__((packed));
+
+/* Define 802.2 SNAP header */
+#define FDDI_K_OUI_LEN	3
+struct fddi_snap_hdr {
+	__u8	dsap;					/* always 0xAA */
+	__u8	ssap;					/* always 0xAA */
+	__u8	ctrl;					/* always 0x03 */
+	__u8	oui[FDDI_K_OUI_LEN];	/* organizational universal id */
+	__be16	ethertype;				/* packet type ID field */
+} __attribute__((packed));
+
+/* Define FDDI LLC frame header */
+struct fddihdr {
+	__u8	fc;						/* frame control */
+	__u8	daddr[FDDI_K_ALEN];		/* destination address */
+	__u8	saddr[FDDI_K_ALEN];		/* source address */
+	union
+		{
+		struct fddi_8022_1_hdr		llc_8022_1;
+		struct fddi_8022_2_hdr		llc_8022_2;
+		struct fddi_snap_hdr		llc_snap;
+		} hdr;
+} __attribute__((packed));
+
+
+#endif /* _UAPI_LINUX_IF_FDDI_H */
diff --git a/include/uapi/linux/if_frad.h b/include/uapi/linux/if_frad.h
new file mode 100644
index 0000000..f25b08d
--- /dev/null
+++ b/include/uapi/linux/if_frad.h
@@ -0,0 +1,122 @@
+/*
+ * DLCI/FRAD	Definitions for Frame Relay Access Devices.  DLCI devices are
+ *		created for each DLCI associated with a FRAD.  The FRAD driver
+ *		is not truly a network device, but the lower level device
+ *		handler.  This allows other FRAD manufacturers to use the DLCI
+ *		code, including its RFC1490 encapsulation alongside the current
+ *		implementation for the Sangoma cards.
+ *
+ * Version:	@(#)if_ifrad.h	0.15	31 Mar 96
+ *
+ * Author:	Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ *		0.15	Mike McLagan	changed structure defs (packed)
+ *					re-arranged flags
+ *					added DLCI_RET vars
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_FRAD_H_
+#define _UAPI_FRAD_H_
+
+#include <linux/if.h>
+
+/* Structures and constants associated with the DLCI device driver */
+
+struct dlci_add
+{
+   char  devname[IFNAMSIZ];
+   short dlci;
+};
+
+#define DLCI_GET_CONF	(SIOCDEVPRIVATE + 2)
+#define DLCI_SET_CONF	(SIOCDEVPRIVATE + 3)
+
+/* 
+ * These are related to the Sangoma SDLA and should remain in order. 
+ * Code within the SDLA module is based on the specifics of this 
+ * structure.  Change at your own peril.
+ */
+struct dlci_conf {
+   short flags;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd; 
+
+/* these are part of the status read */
+   short Tc_fwd;
+   short Tc_bwd;
+   short Tf_max;
+   short Tb_max;
+
+/* add any new fields here above is a mirror of sdla_dlci_conf */
+};
+
+#define DLCI_GET_SLAVE	(SIOCDEVPRIVATE + 4)
+
+/* configuration flags for DLCI */
+#define DLCI_IGNORE_CIR_OUT	0x0001
+#define DLCI_ACCOUNT_CIR_IN	0x0002
+#define DLCI_BUFFER_IF		0x0008
+
+#define DLCI_VALID_FLAGS	0x000B
+
+/* defines for the actual Frame Relay hardware */
+#define FRAD_GET_CONF	(SIOCDEVPRIVATE)
+#define FRAD_SET_CONF	(SIOCDEVPRIVATE + 1)
+
+#define FRAD_LAST_IOCTL	FRAD_SET_CONF
+
+/*
+ * Based on the setup for the Sangoma SDLA.  If changes are 
+ * necessary to this structure, a routine will need to be 
+ * added to that module to copy fields.
+ */
+struct frad_conf 
+{
+   short station;
+   short flags;
+   short kbaud;
+   short clocking;
+   short mtu;
+   short T391;
+   short T392;
+   short N391;
+   short N392;
+   short N393;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd;
+
+/* Add new fields here, above is a mirror of the sdla_conf */
+
+};
+
+#define FRAD_STATION_CPE	0x0000
+#define FRAD_STATION_NODE	0x0001
+
+#define FRAD_TX_IGNORE_CIR	0x0001
+#define FRAD_RX_ACCOUNT_CIR	0x0002
+#define FRAD_DROP_ABORTED	0x0004
+#define FRAD_BUFFERIF		0x0008
+#define FRAD_STATS		0x0010
+#define FRAD_MCI		0x0100
+#define FRAD_AUTODLCI		0x8000
+#define FRAD_VALID_FLAGS	0x811F
+
+#define FRAD_CLOCK_INT		0x0001
+#define FRAD_CLOCK_EXT		0x0000
+
+
+#endif /* _UAPI_FRAD_H_ */
diff --git a/include/linux/if_hippi.h b/include/uapi/linux/if_hippi.h
similarity index 100%
rename from include/linux/if_hippi.h
rename to include/uapi/linux/if_hippi.h
diff --git a/include/linux/if_infiniband.h b/include/uapi/linux/if_infiniband.h
similarity index 100%
rename from include/linux/if_infiniband.h
rename to include/uapi/linux/if_infiniband.h
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
new file mode 100644
index 0000000..5c80cb1
--- /dev/null
+++ b/include/uapi/linux/if_link.h
@@ -0,0 +1,429 @@
+#ifndef _UAPI_LINUX_IF_LINK_H
+#define _UAPI_LINUX_IF_LINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+
+/* This struct should be in sync with struct rtnl_link_stats64 */
+struct rtnl_link_stats {
+	__u32	rx_packets;		/* total packets received	*/
+	__u32	tx_packets;		/* total packets transmitted	*/
+	__u32	rx_bytes;		/* total bytes received 	*/
+	__u32	tx_bytes;		/* total bytes transmitted	*/
+	__u32	rx_errors;		/* bad packets received		*/
+	__u32	tx_errors;		/* packet transmit problems	*/
+	__u32	rx_dropped;		/* no space in linux buffers	*/
+	__u32	tx_dropped;		/* no space available in linux	*/
+	__u32	multicast;		/* multicast packets received	*/
+	__u32	collisions;
+
+	/* detailed rx_errors: */
+	__u32	rx_length_errors;
+	__u32	rx_over_errors;		/* receiver ring buff overflow	*/
+	__u32	rx_crc_errors;		/* recved pkt with crc error	*/
+	__u32	rx_frame_errors;	/* recv'd frame alignment error */
+	__u32	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	__u32	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	__u32	tx_aborted_errors;
+	__u32	tx_carrier_errors;
+	__u32	tx_fifo_errors;
+	__u32	tx_heartbeat_errors;
+	__u32	tx_window_errors;
+
+	/* for cslip etc */
+	__u32	rx_compressed;
+	__u32	tx_compressed;
+};
+
+/* The main device statistics structure */
+struct rtnl_link_stats64 {
+	__u64	rx_packets;		/* total packets received	*/
+	__u64	tx_packets;		/* total packets transmitted	*/
+	__u64	rx_bytes;		/* total bytes received 	*/
+	__u64	tx_bytes;		/* total bytes transmitted	*/
+	__u64	rx_errors;		/* bad packets received		*/
+	__u64	tx_errors;		/* packet transmit problems	*/
+	__u64	rx_dropped;		/* no space in linux buffers	*/
+	__u64	tx_dropped;		/* no space available in linux	*/
+	__u64	multicast;		/* multicast packets received	*/
+	__u64	collisions;
+
+	/* detailed rx_errors: */
+	__u64	rx_length_errors;
+	__u64	rx_over_errors;		/* receiver ring buff overflow	*/
+	__u64	rx_crc_errors;		/* recved pkt with crc error	*/
+	__u64	rx_frame_errors;	/* recv'd frame alignment error */
+	__u64	rx_fifo_errors;		/* recv'r fifo overrun		*/
+	__u64	rx_missed_errors;	/* receiver missed packet	*/
+
+	/* detailed tx_errors */
+	__u64	tx_aborted_errors;
+	__u64	tx_carrier_errors;
+	__u64	tx_fifo_errors;
+	__u64	tx_heartbeat_errors;
+	__u64	tx_window_errors;
+
+	/* for cslip etc */
+	__u64	rx_compressed;
+	__u64	tx_compressed;
+};
+
+/* The struct should be in sync with struct ifmap */
+struct rtnl_link_ifmap {
+	__u64	mem_start;
+	__u64	mem_end;
+	__u64	base_addr;
+	__u16	irq;
+	__u8	dma;
+	__u8	port;
+};
+
+/*
+ * IFLA_AF_SPEC
+ *   Contains nested attributes for address family specific attributes.
+ *   Each address family may create a attribute with the address family
+ *   number as type and create its own attribute structure in it.
+ *
+ *   Example:
+ *   [IFLA_AF_SPEC] = {
+ *       [AF_INET] = {
+ *           [IFLA_INET_CONF] = ...,
+ *       },
+ *       [AF_INET6] = {
+ *           [IFLA_INET6_FLAGS] = ...,
+ *           [IFLA_INET6_CONF] = ...,
+ *       }
+ *   }
+ */
+
+enum {
+	IFLA_UNSPEC,
+	IFLA_ADDRESS,
+	IFLA_BROADCAST,
+	IFLA_IFNAME,
+	IFLA_MTU,
+	IFLA_LINK,
+	IFLA_QDISC,
+	IFLA_STATS,
+	IFLA_COST,
+#define IFLA_COST IFLA_COST
+	IFLA_PRIORITY,
+#define IFLA_PRIORITY IFLA_PRIORITY
+	IFLA_MASTER,
+#define IFLA_MASTER IFLA_MASTER
+	IFLA_WIRELESS,		/* Wireless Extension event - see wireless.h */
+#define IFLA_WIRELESS IFLA_WIRELESS
+	IFLA_PROTINFO,		/* Protocol specific information for a link */
+#define IFLA_PROTINFO IFLA_PROTINFO
+	IFLA_TXQLEN,
+#define IFLA_TXQLEN IFLA_TXQLEN
+	IFLA_MAP,
+#define IFLA_MAP IFLA_MAP
+	IFLA_WEIGHT,
+#define IFLA_WEIGHT IFLA_WEIGHT
+	IFLA_OPERSTATE,
+	IFLA_LINKMODE,
+	IFLA_LINKINFO,
+#define IFLA_LINKINFO IFLA_LINKINFO
+	IFLA_NET_NS_PID,
+	IFLA_IFALIAS,
+	IFLA_NUM_VF,		/* Number of VFs if device is SR-IOV PF */
+	IFLA_VFINFO_LIST,
+	IFLA_STATS64,
+	IFLA_VF_PORTS,
+	IFLA_PORT_SELF,
+	IFLA_AF_SPEC,
+	IFLA_GROUP,		/* Group the device belongs to */
+	IFLA_NET_NS_FD,
+	IFLA_EXT_MASK,		/* Extended info mask, VFs, etc */
+	IFLA_PROMISCUITY,	/* Promiscuity count: > 0 means acts PROMISC */
+#define IFLA_PROMISCUITY IFLA_PROMISCUITY
+	IFLA_NUM_TX_QUEUES,
+	IFLA_NUM_RX_QUEUES,
+	__IFLA_MAX
+};
+
+
+#define IFLA_MAX (__IFLA_MAX - 1)
+
+/* backwards compatibility for userspace */
+#ifndef __KERNEL__
+#define IFLA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg))))
+#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
+#endif
+
+enum {
+	IFLA_INET_UNSPEC,
+	IFLA_INET_CONF,
+	__IFLA_INET_MAX,
+};
+
+#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
+
+/* ifi_flags.
+
+   IFF_* flags.
+
+   The only change is:
+   IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are
+   more not changeable by user. They describe link media
+   characteristics and set by device driver.
+
+   Comments:
+   - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid
+   - If neither of these three flags are set;
+     the interface is NBMA.
+
+   - IFF_MULTICAST does not mean anything special:
+   multicasts can be used on all not-NBMA links.
+   IFF_MULTICAST means that this media uses special encapsulation
+   for multicast frames. Apparently, all IFF_POINTOPOINT and
+   IFF_BROADCAST devices are able to use multicasts too.
+ */
+
+/* IFLA_LINK.
+   For usual devices it is equal ifi_index.
+   If it is a "virtual interface" (f.e. tunnel), ifi_link
+   can point to real physical interface (f.e. for bandwidth calculations),
+   or maybe 0, what means, that real media is unknown (usual
+   for IPIP tunnels, when route to endpoint is allowed to change)
+ */
+
+/* Subtype attributes for IFLA_PROTINFO */
+enum {
+	IFLA_INET6_UNSPEC,
+	IFLA_INET6_FLAGS,	/* link flags			*/
+	IFLA_INET6_CONF,	/* sysctl parameters		*/
+	IFLA_INET6_STATS,	/* statistics			*/
+	IFLA_INET6_MCAST,	/* MC things. What of them?	*/
+	IFLA_INET6_CACHEINFO,	/* time values and max reasm size */
+	IFLA_INET6_ICMP6STATS,	/* statistics (icmpv6)		*/
+	__IFLA_INET6_MAX
+};
+
+#define IFLA_INET6_MAX	(__IFLA_INET6_MAX - 1)
+
+struct ifla_cacheinfo {
+	__u32	max_reasm_len;
+	__u32	tstamp;		/* ipv6InterfaceTable updated timestamp */
+	__u32	reachable_time;
+	__u32	retrans_time;
+};
+
+enum {
+	IFLA_INFO_UNSPEC,
+	IFLA_INFO_KIND,
+	IFLA_INFO_DATA,
+	IFLA_INFO_XSTATS,
+	__IFLA_INFO_MAX,
+};
+
+#define IFLA_INFO_MAX	(__IFLA_INFO_MAX - 1)
+
+/* VLAN section */
+
+enum {
+	IFLA_VLAN_UNSPEC,
+	IFLA_VLAN_ID,
+	IFLA_VLAN_FLAGS,
+	IFLA_VLAN_EGRESS_QOS,
+	IFLA_VLAN_INGRESS_QOS,
+	__IFLA_VLAN_MAX,
+};
+
+#define IFLA_VLAN_MAX	(__IFLA_VLAN_MAX - 1)
+
+struct ifla_vlan_flags {
+	__u32	flags;
+	__u32	mask;
+};
+
+enum {
+	IFLA_VLAN_QOS_UNSPEC,
+	IFLA_VLAN_QOS_MAPPING,
+	__IFLA_VLAN_QOS_MAX
+};
+
+#define IFLA_VLAN_QOS_MAX	(__IFLA_VLAN_QOS_MAX - 1)
+
+struct ifla_vlan_qos_mapping {
+	__u32 from;
+	__u32 to;
+};
+
+/* MACVLAN section */
+enum {
+	IFLA_MACVLAN_UNSPEC,
+	IFLA_MACVLAN_MODE,
+	IFLA_MACVLAN_FLAGS,
+	__IFLA_MACVLAN_MAX,
+};
+
+#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
+
+enum macvlan_mode {
+	MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
+	MACVLAN_MODE_VEPA    = 2, /* talk to other ports through ext bridge */
+	MACVLAN_MODE_BRIDGE  = 4, /* talk to bridge ports directly */
+	MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
+};
+
+#define MACVLAN_FLAG_NOPROMISC	1
+
+/* VXLAN section */
+enum {
+	IFLA_VXLAN_UNSPEC,
+	IFLA_VXLAN_ID,
+	IFLA_VXLAN_GROUP,
+	IFLA_VXLAN_LINK,
+	IFLA_VXLAN_LOCAL,
+	IFLA_VXLAN_TTL,
+	IFLA_VXLAN_TOS,
+	IFLA_VXLAN_LEARNING,
+	IFLA_VXLAN_AGEING,
+	IFLA_VXLAN_LIMIT,
+	IFLA_VXLAN_PORT_RANGE,
+	__IFLA_VXLAN_MAX
+};
+#define IFLA_VXLAN_MAX	(__IFLA_VXLAN_MAX - 1)
+
+struct ifla_vxlan_port_range {
+	__be16	low;
+	__be16	high;
+};
+
+/* SR-IOV virtual function management section */
+
+enum {
+	IFLA_VF_INFO_UNSPEC,
+	IFLA_VF_INFO,
+	__IFLA_VF_INFO_MAX,
+};
+
+#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1)
+
+enum {
+	IFLA_VF_UNSPEC,
+	IFLA_VF_MAC,		/* Hardware queue specific attributes */
+	IFLA_VF_VLAN,
+	IFLA_VF_TX_RATE,	/* TX Bandwidth Allocation */
+	IFLA_VF_SPOOFCHK,	/* Spoof Checking on/off switch */
+	__IFLA_VF_MAX,
+};
+
+#define IFLA_VF_MAX (__IFLA_VF_MAX - 1)
+
+struct ifla_vf_mac {
+	__u32 vf;
+	__u8 mac[32]; /* MAX_ADDR_LEN */
+};
+
+struct ifla_vf_vlan {
+	__u32 vf;
+	__u32 vlan; /* 0 - 4095, 0 disables VLAN filter */
+	__u32 qos;
+};
+
+struct ifla_vf_tx_rate {
+	__u32 vf;
+	__u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */
+};
+
+struct ifla_vf_spoofchk {
+	__u32 vf;
+	__u32 setting;
+};
+
+/* VF ports management section
+ *
+ *	Nested layout of set/get msg is:
+ *
+ *		[IFLA_NUM_VF]
+ *		[IFLA_VF_PORTS]
+ *			[IFLA_VF_PORT]
+ *				[IFLA_PORT_*], ...
+ *			[IFLA_VF_PORT]
+ *				[IFLA_PORT_*], ...
+ *			...
+ *		[IFLA_PORT_SELF]
+ *			[IFLA_PORT_*], ...
+ */
+
+enum {
+	IFLA_VF_PORT_UNSPEC,
+	IFLA_VF_PORT,			/* nest */
+	__IFLA_VF_PORT_MAX,
+};
+
+#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1)
+
+enum {
+	IFLA_PORT_UNSPEC,
+	IFLA_PORT_VF,			/* __u32 */
+	IFLA_PORT_PROFILE,		/* string */
+	IFLA_PORT_VSI_TYPE,		/* 802.1Qbg (pre-)standard VDP */
+	IFLA_PORT_INSTANCE_UUID,	/* binary UUID */
+	IFLA_PORT_HOST_UUID,		/* binary UUID */
+	IFLA_PORT_REQUEST,		/* __u8 */
+	IFLA_PORT_RESPONSE,		/* __u16, output only */
+	__IFLA_PORT_MAX,
+};
+
+#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1)
+
+#define PORT_PROFILE_MAX	40
+#define PORT_UUID_MAX		16
+#define PORT_SELF_VF		-1
+
+enum {
+	PORT_REQUEST_PREASSOCIATE = 0,
+	PORT_REQUEST_PREASSOCIATE_RR,
+	PORT_REQUEST_ASSOCIATE,
+	PORT_REQUEST_DISASSOCIATE,
+};
+
+enum {
+	PORT_VDP_RESPONSE_SUCCESS = 0,
+	PORT_VDP_RESPONSE_INVALID_FORMAT,
+	PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES,
+	PORT_VDP_RESPONSE_UNUSED_VTID,
+	PORT_VDP_RESPONSE_VTID_VIOLATION,
+	PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION,
+	PORT_VDP_RESPONSE_OUT_OF_SYNC,
+	/* 0x08-0xFF reserved for future VDP use */
+	PORT_PROFILE_RESPONSE_SUCCESS = 0x100,
+	PORT_PROFILE_RESPONSE_INPROGRESS,
+	PORT_PROFILE_RESPONSE_INVALID,
+	PORT_PROFILE_RESPONSE_BADSTATE,
+	PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES,
+	PORT_PROFILE_RESPONSE_ERROR,
+};
+
+struct ifla_port_vsi {
+	__u8 vsi_mgr_id;
+	__u8 vsi_type_id[3];
+	__u8 vsi_type_version;
+	__u8 pad[3];
+};
+
+
+/* IPoIB section */
+
+enum {
+	IFLA_IPOIB_UNSPEC,
+	IFLA_IPOIB_PKEY,
+	IFLA_IPOIB_MODE,
+	IFLA_IPOIB_UMCAST,
+	__IFLA_IPOIB_MAX
+};
+
+enum {
+	IPOIB_MODE_DATAGRAM  = 0, /* using unreliable datagram QPs */
+	IPOIB_MODE_CONNECTED = 1, /* using connected QPs */
+};
+
+#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1)
+
+#endif /* _UAPI_LINUX_IF_LINK_H */
diff --git a/include/uapi/linux/if_ltalk.h b/include/uapi/linux/if_ltalk.h
new file mode 100644
index 0000000..b92c1fb
--- /dev/null
+++ b/include/uapi/linux/if_ltalk.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI__LINUX_LTALK_H
+#define _UAPI__LINUX_LTALK_H
+
+#define LTALK_HLEN		1
+#define LTALK_MTU		600
+#define LTALK_ALEN		1
+
+
+#endif /* _UAPI__LINUX_LTALK_H */
diff --git a/include/linux/if_packet.h b/include/uapi/linux/if_packet.h
similarity index 100%
rename from include/linux/if_packet.h
rename to include/uapi/linux/if_packet.h
diff --git a/include/uapi/linux/if_phonet.h b/include/uapi/linux/if_phonet.h
new file mode 100644
index 0000000..f7ad9e2
--- /dev/null
+++ b/include/uapi/linux/if_phonet.h
@@ -0,0 +1,16 @@
+/*
+ * File: if_phonet.h
+ *
+ * Phonet interface kernel definitions
+ *
+ * Copyright (C) 2008 Nokia Corporation. All rights reserved.
+ */
+#ifndef _UAPILINUX_IF_PHONET_H
+#define _UAPILINUX_IF_PHONET_H
+
+#define PHONET_MIN_MTU		6	/* pn_length = 0 */
+#define PHONET_MAX_MTU		65541	/* pn_length = 0xffff */
+#define PHONET_DEV_MTU		PHONET_MAX_MTU
+
+
+#endif /* _UAPILINUX_IF_PHONET_H */
diff --git a/include/linux/if_plip.h b/include/uapi/linux/if_plip.h
similarity index 100%
rename from include/linux/if_plip.h
rename to include/uapi/linux/if_plip.h
diff --git a/include/linux/if_ppp.h b/include/uapi/linux/if_ppp.h
similarity index 100%
rename from include/linux/if_ppp.h
rename to include/uapi/linux/if_ppp.h
diff --git a/include/uapi/linux/if_pppol2tp.h b/include/uapi/linux/if_pppol2tp.h
new file mode 100644
index 0000000..163e8ad
--- /dev/null
+++ b/include/uapi/linux/if_pppol2tp.h
@@ -0,0 +1,104 @@
+/***************************************************************************
+ * Linux PPP over L2TP (PPPoL2TP) Socket Implementation (RFC 2661)
+ *
+ * This file supplies definitions required by the PPP over L2TP driver
+ * (l2tp_ppp.c).  All version information wrt this file is located in l2tp_ppp.c
+ *
+ * License:
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _UAPI__LINUX_IF_PPPOL2TP_H
+#define _UAPI__LINUX_IF_PPPOL2TP_H
+
+#include <linux/types.h>
+
+
+/* Structure used to connect() the socket to a particular tunnel UDP
+ * socket over IPv4.
+ */
+struct pppol2tp_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP socket to use */
+
+	struct sockaddr_in addr;	/* IP address and port to send to */
+
+	__u16 s_tunnel, s_session;	/* For matching incoming packets */
+	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
+};
+
+/* Structure used to connect() the socket to a particular tunnel UDP
+ * socket over IPv6.
+ */
+struct pppol2tpin6_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP socket to use */
+
+	__u16 s_tunnel, s_session;	/* For matching incoming packets */
+	__u16 d_tunnel, d_session;	/* For sending outgoing packets */
+
+	struct sockaddr_in6 addr;	/* IP address and port to send to */
+};
+
+/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
+ * bits. So we need a different sockaddr structure.
+ */
+struct pppol2tpv3_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP or IP socket to use */
+
+	struct sockaddr_in addr;	/* IP address and port to send to */
+
+	__u32 s_tunnel, s_session;	/* For matching incoming packets */
+	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
+};
+
+struct pppol2tpv3in6_addr {
+	__kernel_pid_t	pid;		/* pid that owns the fd.
+					 * 0 => current */
+	int	fd;			/* FD of UDP or IP socket to use */
+
+	__u32 s_tunnel, s_session;	/* For matching incoming packets */
+	__u32 d_tunnel, d_session;	/* For sending outgoing packets */
+
+	struct sockaddr_in6 addr;	/* IP address and port to send to */
+};
+
+/* Socket options:
+ * DEBUG	- bitmask of debug message categories
+ * SENDSEQ	- 0 => don't send packets with sequence numbers
+ *		  1 => send packets with sequence numbers
+ * RECVSEQ	- 0 => receive packet sequence numbers are optional
+ *		  1 => drop receive packets without sequence numbers
+ * LNSMODE	- 0 => act as LAC.
+ *		  1 => act as LNS.
+ * REORDERTO	- reorder timeout (in millisecs). If 0, don't try to reorder.
+ */
+enum {
+	PPPOL2TP_SO_DEBUG	= 1,
+	PPPOL2TP_SO_RECVSEQ	= 2,
+	PPPOL2TP_SO_SENDSEQ	= 3,
+	PPPOL2TP_SO_LNSMODE	= 4,
+	PPPOL2TP_SO_REORDERTO	= 5,
+};
+
+/* Debug message categories for the DEBUG socket option */
+enum {
+	PPPOL2TP_MSG_DEBUG	= (1 << 0),	/* verbose debug (if
+						 * compiled in) */
+	PPPOL2TP_MSG_CONTROL	= (1 << 1),	/* userspace - kernel
+						 * interface */
+	PPPOL2TP_MSG_SEQ	= (1 << 2),	/* sequence numbers */
+	PPPOL2TP_MSG_DATA	= (1 << 3),	/* data packets */
+};
+
+
+
+#endif /* _UAPI__LINUX_IF_PPPOL2TP_H */
diff --git a/include/uapi/linux/if_pppox.h b/include/uapi/linux/if_pppox.h
new file mode 100644
index 0000000..0b46fd5
--- /dev/null
+++ b/include/uapi/linux/if_pppox.h
@@ -0,0 +1,156 @@
+/***************************************************************************
+ * Linux PPP over X - Generic PPP transport layer sockets
+ * Linux PPP over Ethernet (PPPoE) Socket Implementation (RFC 2516) 
+ *
+ * This file supplies definitions required by the PPP over Ethernet driver
+ * (pppox.c).  All version information wrt this file is located in pppox.c
+ *
+ * License:
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _UAPI__LINUX_IF_PPPOX_H
+#define _UAPI__LINUX_IF_PPPOX_H
+
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#include <linux/socket.h>
+#include <linux/if_ether.h>
+#include <linux/if_pppol2tp.h>
+
+/* For user-space programs to pick up these definitions
+ * which they wouldn't get otherwise without defining __KERNEL__
+ */
+#ifndef AF_PPPOX
+#define AF_PPPOX	24
+#define PF_PPPOX	AF_PPPOX
+#endif /* !(AF_PPPOX) */
+
+/************************************************************************ 
+ * PPPoE addressing definition 
+ */ 
+typedef __be16 sid_t;
+struct pppoe_addr {
+	sid_t         sid;                    /* Session identifier */
+	unsigned char remote[ETH_ALEN];       /* Remote address */
+	char          dev[IFNAMSIZ];          /* Local device to use */
+}; 
+ 
+/************************************************************************ 
+ * PPTP addressing definition
+ */
+struct pptp_addr {
+	__be16		call_id;
+	struct in_addr	sin_addr;
+};
+
+/************************************************************************
+ * Protocols supported by AF_PPPOX
+ */
+#define PX_PROTO_OE    0 /* Currently just PPPoE */
+#define PX_PROTO_OL2TP 1 /* Now L2TP also */
+#define PX_PROTO_PPTP  2
+#define PX_MAX_PROTO   3
+
+struct sockaddr_pppox {
+	__kernel_sa_family_t sa_family;       /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;          /* protocol identifier */
+	union {
+		struct pppoe_addr  pppoe;
+		struct pptp_addr   pptp;
+	} sa_addr;
+} __packed;
+
+/* The use of the above union isn't viable because the size of this
+ * struct must stay fixed over time -- applications use sizeof(struct
+ * sockaddr_pppox) to fill it. We use a protocol specific sockaddr
+ * type instead.
+ */
+struct sockaddr_pppol2tp {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tp_addr pppol2tp;
+} __packed;
+
+struct sockaddr_pppol2tpin6 {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tpin6_addr pppol2tp;
+} __packed;
+
+/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32
+ * bits. So we need a different sockaddr structure.
+ */
+struct sockaddr_pppol2tpv3 {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tpv3_addr pppol2tp;
+} __packed;
+
+struct sockaddr_pppol2tpv3in6 {
+	__kernel_sa_family_t sa_family; /* address family, AF_PPPOX */
+	unsigned int    sa_protocol;    /* protocol identifier */
+	struct pppol2tpv3in6_addr pppol2tp;
+} __packed;
+
+/*********************************************************************
+ *
+ * ioctl interface for defining forwarding of connections
+ *
+ ********************************************************************/
+
+#define PPPOEIOCSFWD	_IOW(0xB1 ,0, size_t)
+#define PPPOEIOCDFWD	_IO(0xB1 ,1)
+/*#define PPPOEIOCGFWD	_IOWR(0xB1,2, size_t)*/
+
+/* Codes to identify message types */
+#define PADI_CODE	0x09
+#define PADO_CODE	0x07
+#define PADR_CODE	0x19
+#define PADS_CODE	0x65
+#define PADT_CODE	0xa7
+struct pppoe_tag {
+	__be16 tag_type;
+	__be16 tag_len;
+	char tag_data[0];
+} __attribute__ ((packed));
+
+/* Tag identifiers */
+#define PTT_EOL		__cpu_to_be16(0x0000)
+#define PTT_SRV_NAME	__cpu_to_be16(0x0101)
+#define PTT_AC_NAME	__cpu_to_be16(0x0102)
+#define PTT_HOST_UNIQ	__cpu_to_be16(0x0103)
+#define PTT_AC_COOKIE	__cpu_to_be16(0x0104)
+#define PTT_VENDOR 	__cpu_to_be16(0x0105)
+#define PTT_RELAY_SID	__cpu_to_be16(0x0110)
+#define PTT_SRV_ERR     __cpu_to_be16(0x0201)
+#define PTT_SYS_ERR  	__cpu_to_be16(0x0202)
+#define PTT_GEN_ERR  	__cpu_to_be16(0x0203)
+
+struct pppoe_hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 ver : 4;
+	__u8 type : 4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8 type : 4;
+	__u8 ver : 4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8 code;
+	__be16 sid;
+	__be16 length;
+	struct pppoe_tag tag[0];
+} __packed;
+
+/* Length of entire PPPoE + PPP header */
+#define PPPOE_SES_HLEN	8
+
+
+#endif /* _UAPI__LINUX_IF_PPPOX_H */
diff --git a/include/linux/if_slip.h b/include/uapi/linux/if_slip.h
similarity index 100%
rename from include/linux/if_slip.h
rename to include/uapi/linux/if_slip.h
diff --git a/include/uapi/linux/if_team.h b/include/uapi/linux/if_team.h
new file mode 100644
index 0000000..7b8fa33
--- /dev/null
+++ b/include/uapi/linux/if_team.h
@@ -0,0 +1,107 @@
+/*
+ * include/linux/if_team.h - Network team device driver header
+ * Copyright (c) 2011 Jiri Pirko <jpirko@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IF_TEAM_H_
+#define _UAPI_LINUX_IF_TEAM_H_
+
+
+#define TEAM_STRING_MAX_LEN 32
+
+/**********************************
+ * NETLINK_GENERIC netlink family.
+ **********************************/
+
+enum {
+	TEAM_CMD_NOOP,
+	TEAM_CMD_OPTIONS_SET,
+	TEAM_CMD_OPTIONS_GET,
+	TEAM_CMD_PORT_LIST_GET,
+
+	__TEAM_CMD_MAX,
+	TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1),
+};
+
+enum {
+	TEAM_ATTR_UNSPEC,
+	TEAM_ATTR_TEAM_IFINDEX,		/* u32 */
+	TEAM_ATTR_LIST_OPTION,		/* nest */
+	TEAM_ATTR_LIST_PORT,		/* nest */
+
+	__TEAM_ATTR_MAX,
+	TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1,
+};
+
+/* Nested layout of get/set msg:
+ *
+ *	[TEAM_ATTR_LIST_OPTION]
+ *		[TEAM_ATTR_ITEM_OPTION]
+ *			[TEAM_ATTR_OPTION_*], ...
+ *		[TEAM_ATTR_ITEM_OPTION]
+ *			[TEAM_ATTR_OPTION_*], ...
+ *		...
+ *	[TEAM_ATTR_LIST_PORT]
+ *		[TEAM_ATTR_ITEM_PORT]
+ *			[TEAM_ATTR_PORT_*], ...
+ *		[TEAM_ATTR_ITEM_PORT]
+ *			[TEAM_ATTR_PORT_*], ...
+ *		...
+ */
+
+enum {
+	TEAM_ATTR_ITEM_OPTION_UNSPEC,
+	TEAM_ATTR_ITEM_OPTION,		/* nest */
+
+	__TEAM_ATTR_ITEM_OPTION_MAX,
+	TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1,
+};
+
+enum {
+	TEAM_ATTR_OPTION_UNSPEC,
+	TEAM_ATTR_OPTION_NAME,		/* string */
+	TEAM_ATTR_OPTION_CHANGED,	/* flag */
+	TEAM_ATTR_OPTION_TYPE,		/* u8 */
+	TEAM_ATTR_OPTION_DATA,		/* dynamic */
+	TEAM_ATTR_OPTION_REMOVED,	/* flag */
+	TEAM_ATTR_OPTION_PORT_IFINDEX,	/* u32 */ /* for per-port options */
+	TEAM_ATTR_OPTION_ARRAY_INDEX,	/* u32 */ /* for array options */
+
+	__TEAM_ATTR_OPTION_MAX,
+	TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1,
+};
+
+enum {
+	TEAM_ATTR_ITEM_PORT_UNSPEC,
+	TEAM_ATTR_ITEM_PORT,		/* nest */
+
+	__TEAM_ATTR_ITEM_PORT_MAX,
+	TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1,
+};
+
+enum {
+	TEAM_ATTR_PORT_UNSPEC,
+	TEAM_ATTR_PORT_IFINDEX,		/* u32 */
+	TEAM_ATTR_PORT_CHANGED,		/* flag */
+	TEAM_ATTR_PORT_LINKUP,		/* flag */
+	TEAM_ATTR_PORT_SPEED,		/* u32 */
+	TEAM_ATTR_PORT_DUPLEX,		/* u8 */
+	TEAM_ATTR_PORT_REMOVED,		/* flag */
+
+	__TEAM_ATTR_PORT_MAX,
+	TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1,
+};
+
+/*
+ * NETLINK_GENERIC related info
+ */
+#define TEAM_GENL_NAME "team"
+#define TEAM_GENL_VERSION 0x1
+#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event"
+
+#endif /* _UAPI_LINUX_IF_TEAM_H_ */
diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h
new file mode 100644
index 0000000..25a585c
--- /dev/null
+++ b/include/uapi/linux/if_tun.h
@@ -0,0 +1,94 @@
+/*
+ *  Universal TUN/TAP device driver.
+ *  Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _UAPI__IF_TUN_H
+#define _UAPI__IF_TUN_H
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+#include <linux/filter.h>
+
+/* Read queue size */
+#define TUN_READQ_SIZE	500
+
+/* TUN device flags */
+#define TUN_TUN_DEV 	0x0001	
+#define TUN_TAP_DEV	0x0002
+#define TUN_TYPE_MASK   0x000f
+
+#define TUN_FASYNC	0x0010
+#define TUN_NOCHECKSUM	0x0020
+#define TUN_NO_PI	0x0040
+#define TUN_ONE_QUEUE	0x0080
+#define TUN_PERSIST 	0x0100	
+#define TUN_VNET_HDR 	0x0200
+
+/* Ioctl defines */
+#define TUNSETNOCSUM  _IOW('T', 200, int) 
+#define TUNSETDEBUG   _IOW('T', 201, int) 
+#define TUNSETIFF     _IOW('T', 202, int) 
+#define TUNSETPERSIST _IOW('T', 203, int) 
+#define TUNSETOWNER   _IOW('T', 204, int)
+#define TUNSETLINK    _IOW('T', 205, int)
+#define TUNSETGROUP   _IOW('T', 206, int)
+#define TUNGETFEATURES _IOR('T', 207, unsigned int)
+#define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
+#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
+#define TUNGETIFF      _IOR('T', 210, unsigned int)
+#define TUNGETSNDBUF   _IOR('T', 211, int)
+#define TUNSETSNDBUF   _IOW('T', 212, int)
+#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog)
+#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog)
+#define TUNGETVNETHDRSZ _IOR('T', 215, int)
+#define TUNSETVNETHDRSZ _IOW('T', 216, int)
+
+/* TUNSETIFF ifr flags */
+#define IFF_TUN		0x0001
+#define IFF_TAP		0x0002
+#define IFF_NO_PI	0x1000
+#define IFF_ONE_QUEUE	0x2000
+#define IFF_VNET_HDR	0x4000
+#define IFF_TUN_EXCL	0x8000
+
+/* Features for GSO (TUNSETOFFLOAD). */
+#define TUN_F_CSUM	0x01	/* You can hand me unchecksummed packets. */
+#define TUN_F_TSO4	0x02	/* I can handle TSO for IPv4 packets */
+#define TUN_F_TSO6	0x04	/* I can handle TSO for IPv6 packets */
+#define TUN_F_TSO_ECN	0x08	/* I can handle TSO with ECN bits. */
+#define TUN_F_UFO	0x10	/* I can handle UFO packets */
+
+/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */
+#define TUN_PKT_STRIP	0x0001
+struct tun_pi {
+	__u16  flags;
+	__be16 proto;
+};
+
+/*
+ * Filter spec (used for SETXXFILTER ioctls)
+ * This stuff is applicable only to the TAP (Ethernet) devices.
+ * If the count is zero the filter is disabled and the driver accepts
+ * all packets (promisc mode).
+ * If the filter is enabled in order to accept broadcast packets
+ * broadcast addr must be explicitly included in the addr list.
+ */
+#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */
+struct tun_filter {
+	__u16  flags; /* TUN_FLT_ flags see above */
+	__u16  count; /* Number of addresses */
+	__u8   addr[0][ETH_ALEN];
+};
+
+#endif /* _UAPI__IF_TUN_H */
diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h
new file mode 100644
index 0000000..5db5942
--- /dev/null
+++ b/include/uapi/linux/if_tunnel.h
@@ -0,0 +1,96 @@
+#ifndef _UAPI_IF_TUNNEL_H_
+#define _UAPI_IF_TUNNEL_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+
+#define SIOCGETTUNNEL   (SIOCDEVPRIVATE + 0)
+#define SIOCADDTUNNEL   (SIOCDEVPRIVATE + 1)
+#define SIOCDELTUNNEL   (SIOCDEVPRIVATE + 2)
+#define SIOCCHGTUNNEL   (SIOCDEVPRIVATE + 3)
+#define SIOCGETPRL      (SIOCDEVPRIVATE + 4)
+#define SIOCADDPRL      (SIOCDEVPRIVATE + 5)
+#define SIOCDELPRL      (SIOCDEVPRIVATE + 6)
+#define SIOCCHGPRL      (SIOCDEVPRIVATE + 7)
+#define SIOCGET6RD      (SIOCDEVPRIVATE + 8)
+#define SIOCADD6RD      (SIOCDEVPRIVATE + 9)
+#define SIOCDEL6RD      (SIOCDEVPRIVATE + 10)
+#define SIOCCHG6RD      (SIOCDEVPRIVATE + 11)
+
+#define GRE_CSUM	__cpu_to_be16(0x8000)
+#define GRE_ROUTING	__cpu_to_be16(0x4000)
+#define GRE_KEY		__cpu_to_be16(0x2000)
+#define GRE_SEQ		__cpu_to_be16(0x1000)
+#define GRE_STRICT	__cpu_to_be16(0x0800)
+#define GRE_REC		__cpu_to_be16(0x0700)
+#define GRE_FLAGS	__cpu_to_be16(0x00F8)
+#define GRE_VERSION	__cpu_to_be16(0x0007)
+
+struct ip_tunnel_parm {
+	char			name[IFNAMSIZ];
+	int			link;
+	__be16			i_flags;
+	__be16			o_flags;
+	__be32			i_key;
+	__be32			o_key;
+	struct iphdr		iph;
+};
+
+/* SIT-mode i_flags */
+#define	SIT_ISATAP	0x0001
+
+struct ip_tunnel_prl {
+	__be32			addr;
+	__u16			flags;
+	__u16			__reserved;
+	__u32			datalen;
+	__u32			__reserved2;
+	/* data follows */
+};
+
+/* PRL flags */
+#define	PRL_DEFAULT		0x0001
+
+struct ip_tunnel_6rd {
+	struct in6_addr		prefix;
+	__be32			relay_prefix;
+	__u16			prefixlen;
+	__u16			relay_prefixlen;
+};
+
+enum {
+	IFLA_GRE_UNSPEC,
+	IFLA_GRE_LINK,
+	IFLA_GRE_IFLAGS,
+	IFLA_GRE_OFLAGS,
+	IFLA_GRE_IKEY,
+	IFLA_GRE_OKEY,
+	IFLA_GRE_LOCAL,
+	IFLA_GRE_REMOTE,
+	IFLA_GRE_TTL,
+	IFLA_GRE_TOS,
+	IFLA_GRE_PMTUDISC,
+	IFLA_GRE_ENCAP_LIMIT,
+	IFLA_GRE_FLOWINFO,
+	IFLA_GRE_FLAGS,
+	__IFLA_GRE_MAX,
+};
+
+#define IFLA_GRE_MAX	(__IFLA_GRE_MAX - 1)
+
+/* VTI-mode i_flags */
+#define VTI_ISVTI 0x0001
+
+enum {
+	IFLA_VTI_UNSPEC,
+	IFLA_VTI_LINK,
+	IFLA_VTI_IKEY,
+	IFLA_VTI_OKEY,
+	IFLA_VTI_LOCAL,
+	IFLA_VTI_REMOTE,
+	__IFLA_VTI_MAX,
+};
+
+#define IFLA_VTI_MAX	(__IFLA_VTI_MAX - 1)
+#endif /* _UAPI_IF_TUNNEL_H_ */
diff --git a/include/uapi/linux/if_vlan.h b/include/uapi/linux/if_vlan.h
new file mode 100644
index 0000000..0744f8e
--- /dev/null
+++ b/include/uapi/linux/if_vlan.h
@@ -0,0 +1,63 @@
+/*
+ * VLAN		An implementation of 802.1Q VLAN tagging.
+ *
+ * Authors:	Ben Greear <greearb@candelatech.com>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef _UAPI_LINUX_IF_VLAN_H_
+#define _UAPI_LINUX_IF_VLAN_H_
+
+
+/* VLAN IOCTLs are found in sockios.h */
+
+/* Passed in vlan_ioctl_args structure to determine behaviour. */
+enum vlan_ioctl_cmds {
+	ADD_VLAN_CMD,
+	DEL_VLAN_CMD,
+	SET_VLAN_INGRESS_PRIORITY_CMD,
+	SET_VLAN_EGRESS_PRIORITY_CMD,
+	GET_VLAN_INGRESS_PRIORITY_CMD,
+	GET_VLAN_EGRESS_PRIORITY_CMD,
+	SET_VLAN_NAME_TYPE_CMD,
+	SET_VLAN_FLAG_CMD,
+	GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */
+	GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
+};
+
+enum vlan_flags {
+	VLAN_FLAG_REORDER_HDR	= 0x1,
+	VLAN_FLAG_GVRP		= 0x2,
+	VLAN_FLAG_LOOSE_BINDING	= 0x4,
+};
+
+enum vlan_name_types {
+	VLAN_NAME_TYPE_PLUS_VID, /* Name will look like:  vlan0005 */
+	VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like:  eth1.0005 */
+	VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like:  vlan5 */
+	VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like:  eth0.5 */
+	VLAN_NAME_TYPE_HIGHEST
+};
+
+struct vlan_ioctl_args {
+	int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */
+	char device1[24];
+
+        union {
+		char device2[24];
+		int VID;
+		unsigned int skb_priority;
+		unsigned int name_type;
+		unsigned int bind_type;
+		unsigned int flag; /* Matches vlan_dev_priv flags */
+        } u;
+
+	short vlan_qos;   
+};
+
+#endif /* _UAPI_LINUX_IF_VLAN_H_ */
diff --git a/include/linux/if_x25.h b/include/uapi/linux/if_x25.h
similarity index 100%
rename from include/linux/if_x25.h
rename to include/uapi/linux/if_x25.h
diff --git a/include/uapi/linux/igmp.h b/include/uapi/linux/igmp.h
new file mode 100644
index 0000000..ccbb32a
--- /dev/null
+++ b/include/uapi/linux/igmp.h
@@ -0,0 +1,128 @@
+/*
+ *	Linux NET3:	Internet Group Management Protocol  [IGMP]
+ *
+ *	Authors:
+ *		Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ *	Extended to talk the BSD extended IGMP protocol of mrouted 3.6
+ *
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IGMP_H
+#define _UAPI_LINUX_IGMP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+/*
+ *	IGMP protocol structures
+ */
+
+/*
+ *	Header in on cable format
+ */
+
+struct igmphdr {
+	__u8 type;
+	__u8 code;		/* For newer IGMP */
+	__sum16 csum;
+	__be32 group;
+};
+
+/* V3 group record types [grec_type] */
+#define IGMPV3_MODE_IS_INCLUDE		1
+#define IGMPV3_MODE_IS_EXCLUDE		2
+#define IGMPV3_CHANGE_TO_INCLUDE	3
+#define IGMPV3_CHANGE_TO_EXCLUDE	4
+#define IGMPV3_ALLOW_NEW_SOURCES	5
+#define IGMPV3_BLOCK_OLD_SOURCES	6
+
+struct igmpv3_grec {
+	__u8	grec_type;
+	__u8	grec_auxwords;
+	__be16	grec_nsrcs;
+	__be32	grec_mca;
+	__be32	grec_src[0];
+};
+
+struct igmpv3_report {
+	__u8 type;
+	__u8 resv1;
+	__be16 csum;
+	__be16 resv2;
+	__be16 ngrec;
+	struct igmpv3_grec grec[0];
+};
+
+struct igmpv3_query {
+	__u8 type;
+	__u8 code;
+	__be16 csum;
+	__be32 group;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8 qrv:3,
+	     suppress:1,
+	     resv:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8 resv:4,
+	     suppress:1,
+	     qrv:3;
+#else
+#error "Please fix <asm/byteorder.h>"
+#endif
+	__u8 qqic;
+	__be16 nsrcs;
+	__be32 srcs[0];
+};
+
+#define IGMP_HOST_MEMBERSHIP_QUERY	0x11	/* From RFC1112 */
+#define IGMP_HOST_MEMBERSHIP_REPORT	0x12	/* Ditto */
+#define IGMP_DVMRP			0x13	/* DVMRP routing */
+#define IGMP_PIM			0x14	/* PIM routing */
+#define IGMP_TRACE			0x15
+#define IGMPV2_HOST_MEMBERSHIP_REPORT	0x16	/* V2 version of 0x12 */
+#define IGMP_HOST_LEAVE_MESSAGE 	0x17
+#define IGMPV3_HOST_MEMBERSHIP_REPORT	0x22	/* V3 version of 0x12 */
+
+#define IGMP_MTRACE_RESP		0x1e
+#define IGMP_MTRACE			0x1f
+
+
+/*
+ *	Use the BSD names for these for compatibility
+ */
+
+#define IGMP_DELAYING_MEMBER		0x01
+#define IGMP_IDLE_MEMBER		0x02
+#define IGMP_LAZY_MEMBER		0x03
+#define IGMP_SLEEPING_MEMBER		0x04
+#define IGMP_AWAKENING_MEMBER		0x05
+
+#define IGMP_MINLEN			8
+
+#define IGMP_MAX_HOST_REPORT_DELAY	10	/* max delay for response to */
+						/* query (in seconds)	*/
+
+#define IGMP_TIMER_SCALE		10	/* denotes that the igmphdr->timer field */
+						/* specifies time in 10th of seconds	 */
+
+#define IGMP_AGE_THRESHOLD		400	/* If this host don't hear any IGMP V1	*/
+						/* message in this period of time,	*/
+						/* revert to IGMP v2 router.		*/
+
+#define IGMP_ALL_HOSTS		htonl(0xE0000001L)
+#define IGMP_ALL_ROUTER 	htonl(0xE0000002L)
+#define IGMPV3_ALL_MCR	 	htonl(0xE0000016L)
+#define IGMP_LOCAL_GROUP	htonl(0xE0000000L)
+#define IGMP_LOCAL_GROUP_MASK	htonl(0xFFFFFF00L)
+
+/*
+ * struct for keeping the multicast list in
+ */
+
+#endif /* _UAPI_LINUX_IGMP_H */
diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h
new file mode 100644
index 0000000..9edb441
--- /dev/null
+++ b/include/uapi/linux/in.h
@@ -0,0 +1,253 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions of the Internet Protocol.
+ *
+ * Version:	@(#)in.h	1.0.1	04/21/93
+ *
+ * Authors:	Original taken from the GNU Project <netinet/in.h> file.
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IN_H
+#define _UAPI_LINUX_IN_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Standard well-defined IP protocols.  */
+enum {
+  IPPROTO_IP = 0,		/* Dummy protocol for TCP		*/
+  IPPROTO_ICMP = 1,		/* Internet Control Message Protocol	*/
+  IPPROTO_IGMP = 2,		/* Internet Group Management Protocol	*/
+  IPPROTO_IPIP = 4,		/* IPIP tunnels (older KA9Q tunnels use 94) */
+  IPPROTO_TCP = 6,		/* Transmission Control Protocol	*/
+  IPPROTO_EGP = 8,		/* Exterior Gateway Protocol		*/
+  IPPROTO_PUP = 12,		/* PUP protocol				*/
+  IPPROTO_UDP = 17,		/* User Datagram Protocol		*/
+  IPPROTO_IDP = 22,		/* XNS IDP protocol			*/
+  IPPROTO_DCCP = 33,		/* Datagram Congestion Control Protocol */
+  IPPROTO_RSVP = 46,		/* RSVP protocol			*/
+  IPPROTO_GRE = 47,		/* Cisco GRE tunnels (rfc 1701,1702)	*/
+
+  IPPROTO_IPV6	 = 41,		/* IPv6-in-IPv4 tunnelling		*/
+
+  IPPROTO_ESP = 50,            /* Encapsulation Security Payload protocol */
+  IPPROTO_AH = 51,             /* Authentication Header protocol       */
+  IPPROTO_BEETPH = 94,	       /* IP option pseudo header for BEET */
+  IPPROTO_PIM    = 103,		/* Protocol Independent Multicast	*/
+
+  IPPROTO_COMP   = 108,                /* Compression Header protocol */
+  IPPROTO_SCTP   = 132,		/* Stream Control Transport Protocol	*/
+  IPPROTO_UDPLITE = 136,	/* UDP-Lite (RFC 3828)			*/
+
+  IPPROTO_RAW	 = 255,		/* Raw IP packets			*/
+  IPPROTO_MAX
+};
+
+
+/* Internet address. */
+struct in_addr {
+	__be32	s_addr;
+};
+
+#define IP_TOS		1
+#define IP_TTL		2
+#define IP_HDRINCL	3
+#define IP_OPTIONS	4
+#define IP_ROUTER_ALERT	5
+#define IP_RECVOPTS	6
+#define IP_RETOPTS	7
+#define IP_PKTINFO	8
+#define IP_PKTOPTIONS	9
+#define IP_MTU_DISCOVER	10
+#define IP_RECVERR	11
+#define IP_RECVTTL	12
+#define	IP_RECVTOS	13
+#define IP_MTU		14
+#define IP_FREEBIND	15
+#define IP_IPSEC_POLICY	16
+#define IP_XFRM_POLICY	17
+#define IP_PASSSEC	18
+#define IP_TRANSPARENT	19
+
+/* BSD compatibility */
+#define IP_RECVRETOPTS	IP_RETOPTS
+
+/* TProxy original addresses */
+#define IP_ORIGDSTADDR       20
+#define IP_RECVORIGDSTADDR   IP_ORIGDSTADDR
+
+#define IP_MINTTL       21
+#define IP_NODEFRAG     22
+
+/* IP_MTU_DISCOVER values */
+#define IP_PMTUDISC_DONT		0	/* Never send DF frames */
+#define IP_PMTUDISC_WANT		1	/* Use per route hints	*/
+#define IP_PMTUDISC_DO			2	/* Always DF		*/
+#define IP_PMTUDISC_PROBE		3       /* Ignore dst pmtu      */
+
+#define IP_MULTICAST_IF			32
+#define IP_MULTICAST_TTL 		33
+#define IP_MULTICAST_LOOP 		34
+#define IP_ADD_MEMBERSHIP		35
+#define IP_DROP_MEMBERSHIP		36
+#define IP_UNBLOCK_SOURCE		37
+#define IP_BLOCK_SOURCE			38
+#define IP_ADD_SOURCE_MEMBERSHIP	39
+#define IP_DROP_SOURCE_MEMBERSHIP	40
+#define IP_MSFILTER			41
+#define MCAST_JOIN_GROUP		42
+#define MCAST_BLOCK_SOURCE		43
+#define MCAST_UNBLOCK_SOURCE		44
+#define MCAST_LEAVE_GROUP		45
+#define MCAST_JOIN_SOURCE_GROUP		46
+#define MCAST_LEAVE_SOURCE_GROUP	47
+#define MCAST_MSFILTER			48
+#define IP_MULTICAST_ALL		49
+#define IP_UNICAST_IF			50
+
+#define MCAST_EXCLUDE	0
+#define MCAST_INCLUDE	1
+
+/* These need to appear somewhere around here */
+#define IP_DEFAULT_MULTICAST_TTL        1
+#define IP_DEFAULT_MULTICAST_LOOP       1
+
+/* Request struct for multicast socket ops */
+
+struct ip_mreq  {
+	struct in_addr imr_multiaddr;	/* IP multicast address of group */
+	struct in_addr imr_interface;	/* local IP address of interface */
+};
+
+struct ip_mreqn {
+	struct in_addr	imr_multiaddr;		/* IP multicast address of group */
+	struct in_addr	imr_address;		/* local IP address of interface */
+	int		imr_ifindex;		/* Interface index */
+};
+
+struct ip_mreq_source {
+	__be32		imr_multiaddr;
+	__be32		imr_interface;
+	__be32		imr_sourceaddr;
+};
+
+struct ip_msfilter {
+	__be32		imsf_multiaddr;
+	__be32		imsf_interface;
+	__u32		imsf_fmode;
+	__u32		imsf_numsrc;
+	__be32		imsf_slist[1];
+};
+
+#define IP_MSFILTER_SIZE(numsrc) \
+	(sizeof(struct ip_msfilter) - sizeof(__u32) \
+	+ (numsrc) * sizeof(__u32))
+
+struct group_req {
+	__u32				 gr_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gr_group;	/* group address */
+};
+
+struct group_source_req {
+	__u32				 gsr_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gsr_group;	/* group address */
+	struct __kernel_sockaddr_storage gsr_source;	/* source address */
+};
+
+struct group_filter {
+	__u32				 gf_interface;	/* interface index */
+	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
+	__u32				 gf_fmode;	/* filter mode */
+	__u32				 gf_numsrc;	/* number of sources */
+	struct __kernel_sockaddr_storage gf_slist[1];	/* interface index */
+};
+
+#define GROUP_FILTER_SIZE(numsrc) \
+	(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
+	+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
+
+struct in_pktinfo {
+	int		ipi_ifindex;
+	struct in_addr	ipi_spec_dst;
+	struct in_addr	ipi_addr;
+};
+
+/* Structure describing an Internet (IP) socket address. */
+#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
+struct sockaddr_in {
+  __kernel_sa_family_t	sin_family;	/* Address family		*/
+  __be16		sin_port;	/* Port number			*/
+  struct in_addr	sin_addr;	/* Internet address		*/
+
+  /* Pad to size of `struct sockaddr'. */
+  unsigned char		__pad[__SOCK_SIZE__ - sizeof(short int) -
+			sizeof(unsigned short int) - sizeof(struct in_addr)];
+};
+#define sin_zero	__pad		/* for BSD UNIX comp. -FvK	*/
+
+
+/*
+ * Definitions of the bits in an Internet address integer.
+ * On subnets, host and network parts are found according
+ * to the subnet mask, not these masks.
+ */
+#define	IN_CLASSA(a)		((((long int) (a)) & 0x80000000) == 0)
+#define	IN_CLASSA_NET		0xff000000
+#define	IN_CLASSA_NSHIFT	24
+#define	IN_CLASSA_HOST		(0xffffffff & ~IN_CLASSA_NET)
+#define	IN_CLASSA_MAX		128
+
+#define	IN_CLASSB(a)		((((long int) (a)) & 0xc0000000) == 0x80000000)
+#define	IN_CLASSB_NET		0xffff0000
+#define	IN_CLASSB_NSHIFT	16
+#define	IN_CLASSB_HOST		(0xffffffff & ~IN_CLASSB_NET)
+#define	IN_CLASSB_MAX		65536
+
+#define	IN_CLASSC(a)		((((long int) (a)) & 0xe0000000) == 0xc0000000)
+#define	IN_CLASSC_NET		0xffffff00
+#define	IN_CLASSC_NSHIFT	8
+#define	IN_CLASSC_HOST		(0xffffffff & ~IN_CLASSC_NET)
+
+#define	IN_CLASSD(a)		((((long int) (a)) & 0xf0000000) == 0xe0000000)
+#define	IN_MULTICAST(a)		IN_CLASSD(a)
+#define IN_MULTICAST_NET	0xF0000000
+
+#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
+#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
+
+/* Address to accept any incoming messages. */
+#define	INADDR_ANY		((unsigned long int) 0x00000000)
+
+/* Address to send to all hosts. */
+#define	INADDR_BROADCAST	((unsigned long int) 0xffffffff)
+
+/* Address indicating an error return. */
+#define	INADDR_NONE		((unsigned long int) 0xffffffff)
+
+/* Network number for local host loopback. */
+#define	IN_LOOPBACKNET		127
+
+/* Address to loopback in software to local host.  */
+#define	INADDR_LOOPBACK		0x7f000001	/* 127.0.0.1   */
+#define	IN_LOOPBACK(a)		((((long int) (a)) & 0xff000000) == 0x7f000000)
+
+/* Defines for Multicast INADDR */
+#define INADDR_UNSPEC_GROUP   	0xe0000000U	/* 224.0.0.0   */
+#define INADDR_ALLHOSTS_GROUP 	0xe0000001U	/* 224.0.0.1   */
+#define INADDR_ALLRTRS_GROUP    0xe0000002U	/* 224.0.0.2 */
+#define INADDR_MAX_LOCAL_GROUP  0xe00000ffU	/* 224.0.0.255 */
+
+
+/* <asm/byteorder.h> contains the htonl type stuff.. */
+#include <asm/byteorder.h> 
+
+
+#endif /* _UAPI_LINUX_IN_H */
diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h
new file mode 100644
index 0000000..1e31599
--- /dev/null
+++ b/include/uapi/linux/in6.h
@@ -0,0 +1,279 @@
+/*
+ *	Types and definitions for AF_INET6 
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *	Sources:
+ *	IPv6 Program Interfaces for BSD Systems
+ *      <draft-ietf-ipngwg-bsd-api-05.txt>
+ *
+ *	Advanced Sockets API for IPv6
+ *	<draft-stevens-advanced-api-00.txt>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IN6_H
+#define _UAPI_LINUX_IN6_H
+
+#include <linux/types.h>
+
+/*
+ *	IPv6 address structure
+ */
+
+struct in6_addr {
+	union {
+		__u8		u6_addr8[16];
+		__be16		u6_addr16[8];
+		__be32		u6_addr32[4];
+	} in6_u;
+#define s6_addr			in6_u.u6_addr8
+#define s6_addr16		in6_u.u6_addr16
+#define s6_addr32		in6_u.u6_addr32
+};
+
+/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553
+ * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
+ * in network byte order, not in host byte order as are the IPv4 equivalents
+ */
+
+struct sockaddr_in6 {
+	unsigned short int	sin6_family;    /* AF_INET6 */
+	__be16			sin6_port;      /* Transport layer port # */
+	__be32			sin6_flowinfo;  /* IPv6 flow information */
+	struct in6_addr		sin6_addr;      /* IPv6 address */
+	__u32			sin6_scope_id;  /* scope id (new in RFC2553) */
+};
+
+struct ipv6_mreq {
+	/* IPv6 multicast address of group */
+	struct in6_addr ipv6mr_multiaddr;
+
+	/* local IPv6 address of interface */
+	int		ipv6mr_ifindex;
+};
+
+#define ipv6mr_acaddr	ipv6mr_multiaddr
+
+struct in6_flowlabel_req {
+	struct in6_addr	flr_dst;
+	__be32	flr_label;
+	__u8	flr_action;
+	__u8	flr_share;
+	__u16	flr_flags;
+	__u16 	flr_expires;
+	__u16	flr_linger;
+	__u32	__flr_pad;
+	/* Options in format of IPV6_PKTOPTIONS */
+};
+
+#define IPV6_FL_A_GET	0
+#define IPV6_FL_A_PUT	1
+#define IPV6_FL_A_RENEW	2
+
+#define IPV6_FL_F_CREATE	1
+#define IPV6_FL_F_EXCL		2
+
+#define IPV6_FL_S_NONE		0
+#define IPV6_FL_S_EXCL		1
+#define IPV6_FL_S_PROCESS	2
+#define IPV6_FL_S_USER		3
+#define IPV6_FL_S_ANY		255
+
+
+/*
+ *	Bitmask constant declarations to help applications select out the 
+ *	flow label and priority fields.
+ *
+ *	Note that this are in host byte order while the flowinfo field of
+ *	sockaddr_in6 is in network byte order.
+ */
+
+#define IPV6_FLOWINFO_FLOWLABEL		0x000fffff
+#define IPV6_FLOWINFO_PRIORITY		0x0ff00000
+
+/* These definitions are obsolete */
+#define IPV6_PRIORITY_UNCHARACTERIZED	0x0000
+#define IPV6_PRIORITY_FILLER		0x0100
+#define IPV6_PRIORITY_UNATTENDED	0x0200
+#define IPV6_PRIORITY_RESERVED1		0x0300
+#define IPV6_PRIORITY_BULK		0x0400
+#define IPV6_PRIORITY_RESERVED2		0x0500
+#define IPV6_PRIORITY_INTERACTIVE	0x0600
+#define IPV6_PRIORITY_CONTROL		0x0700
+#define IPV6_PRIORITY_8			0x0800
+#define IPV6_PRIORITY_9			0x0900
+#define IPV6_PRIORITY_10		0x0a00
+#define IPV6_PRIORITY_11		0x0b00
+#define IPV6_PRIORITY_12		0x0c00
+#define IPV6_PRIORITY_13		0x0d00
+#define IPV6_PRIORITY_14		0x0e00
+#define IPV6_PRIORITY_15		0x0f00
+
+/*
+ *	IPV6 extension headers
+ */
+#define IPPROTO_HOPOPTS		0	/* IPv6 hop-by-hop options	*/
+#define IPPROTO_ROUTING		43	/* IPv6 routing header		*/
+#define IPPROTO_FRAGMENT	44	/* IPv6 fragmentation header	*/
+#define IPPROTO_ICMPV6		58	/* ICMPv6			*/
+#define IPPROTO_NONE		59	/* IPv6 no next header		*/
+#define IPPROTO_DSTOPTS		60	/* IPv6 destination options	*/
+#define IPPROTO_MH		135	/* IPv6 mobility header		*/
+
+/*
+ *	IPv6 TLV options.
+ */
+#define IPV6_TLV_PAD1		0
+#define IPV6_TLV_PADN		1
+#define IPV6_TLV_ROUTERALERT	5
+#define IPV6_TLV_JUMBO		194
+#define IPV6_TLV_HAO		201	/* home address option */
+
+/*
+ *	IPV6 socket options
+ */
+
+#define IPV6_ADDRFORM		1
+#define IPV6_2292PKTINFO	2
+#define IPV6_2292HOPOPTS	3
+#define IPV6_2292DSTOPTS	4
+#define IPV6_2292RTHDR		5
+#define IPV6_2292PKTOPTIONS	6
+#define IPV6_CHECKSUM		7
+#define IPV6_2292HOPLIMIT	8
+#define IPV6_NEXTHOP		9
+#define IPV6_AUTHHDR		10	/* obsolete */
+#define IPV6_FLOWINFO		11
+
+#define IPV6_UNICAST_HOPS	16
+#define IPV6_MULTICAST_IF	17
+#define IPV6_MULTICAST_HOPS	18
+#define IPV6_MULTICAST_LOOP	19
+#define IPV6_ADD_MEMBERSHIP	20
+#define IPV6_DROP_MEMBERSHIP	21
+#define IPV6_ROUTER_ALERT	22
+#define IPV6_MTU_DISCOVER	23
+#define IPV6_MTU		24
+#define IPV6_RECVERR		25
+#define IPV6_V6ONLY		26
+#define IPV6_JOIN_ANYCAST	27
+#define IPV6_LEAVE_ANYCAST	28
+
+/* IPV6_MTU_DISCOVER values */
+#define IPV6_PMTUDISC_DONT		0
+#define IPV6_PMTUDISC_WANT		1
+#define IPV6_PMTUDISC_DO		2
+#define IPV6_PMTUDISC_PROBE		3
+
+/* Flowlabel */
+#define IPV6_FLOWLABEL_MGR	32
+#define IPV6_FLOWINFO_SEND	33
+
+#define IPV6_IPSEC_POLICY	34
+#define IPV6_XFRM_POLICY	35
+
+/*
+ * Multicast:
+ * Following socket options are shared between IPv4 and IPv6.
+ *
+ * MCAST_JOIN_GROUP		42
+ * MCAST_BLOCK_SOURCE		43
+ * MCAST_UNBLOCK_SOURCE		44
+ * MCAST_LEAVE_GROUP		45
+ * MCAST_JOIN_SOURCE_GROUP	46
+ * MCAST_LEAVE_SOURCE_GROUP	47
+ * MCAST_MSFILTER		48
+ */
+
+/*
+ * Advanced API (RFC3542) (1)
+ *
+ * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c.
+ */
+
+#define IPV6_RECVPKTINFO	49
+#define IPV6_PKTINFO		50
+#define IPV6_RECVHOPLIMIT	51
+#define IPV6_HOPLIMIT		52
+#define IPV6_RECVHOPOPTS	53
+#define IPV6_HOPOPTS		54
+#define IPV6_RTHDRDSTOPTS	55
+#define IPV6_RECVRTHDR		56
+#define IPV6_RTHDR		57
+#define IPV6_RECVDSTOPTS	58
+#define IPV6_DSTOPTS		59
+#define IPV6_RECVPATHMTU	60
+#define IPV6_PATHMTU		61
+#define IPV6_DONTFRAG		62
+#if 0	/* not yet */
+#define IPV6_USE_MIN_MTU	63
+#endif
+
+/*
+ * Netfilter (1)
+ *
+ * Following socket options are used in ip6_tables;
+ * see include/linux/netfilter_ipv6/ip6_tables.h.
+ *
+ * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO		64
+ * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES	65
+ */
+
+/*
+ * Advanced API (RFC3542) (2)
+ */
+#define IPV6_RECVTCLASS		66
+#define IPV6_TCLASS		67
+
+/*
+ * Netfilter (2)
+ *
+ * Following socket options are used in ip6_tables;
+ * see include/linux/netfilter_ipv6/ip6_tables.h.
+ *
+ * IP6T_SO_GET_REVISION_MATCH	68
+ * IP6T_SO_GET_REVISION_TARGET	69
+ */
+
+/* RFC5014: Source address selection */
+#define IPV6_ADDR_PREFERENCES	72
+
+#define IPV6_PREFER_SRC_TMP		0x0001
+#define IPV6_PREFER_SRC_PUBLIC		0x0002
+#define IPV6_PREFER_SRC_PUBTMP_DEFAULT	0x0100
+#define IPV6_PREFER_SRC_COA		0x0004
+#define IPV6_PREFER_SRC_HOME		0x0400
+#define IPV6_PREFER_SRC_CGA		0x0008
+#define IPV6_PREFER_SRC_NONCGA		0x0800
+
+/* RFC5082: Generalized Ttl Security Mechanism */
+#define IPV6_MINHOPCOUNT		73
+
+#define IPV6_ORIGDSTADDR        74
+#define IPV6_RECVORIGDSTADDR    IPV6_ORIGDSTADDR
+#define IPV6_TRANSPARENT        75
+#define IPV6_UNICAST_IF         76
+
+/*
+ * Multicast Routing:
+ * see include/linux/mroute6.h.
+ *
+ * MRT6_INIT			200
+ * MRT6_DONE			201
+ * MRT6_ADD_MIF			202
+ * MRT6_DEL_MIF			203
+ * MRT6_ADD_MFC			204
+ * MRT6_DEL_MFC			205
+ * MRT6_VERSION			206
+ * MRT6_ASSERT			207
+ * MRT6_PIM			208
+ * (reserved)			209
+ */
+#endif /* _UAPI_LINUX_IN6_H */
diff --git a/include/linux/in_route.h b/include/uapi/linux/in_route.h
similarity index 100%
rename from include/linux/in_route.h
rename to include/uapi/linux/in_route.h
diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h
new file mode 100644
index 0000000..8c469af
--- /dev/null
+++ b/include/uapi/linux/inet_diag.h
@@ -0,0 +1,136 @@
+#ifndef _UAPI_INET_DIAG_H_
+#define _UAPI_INET_DIAG_H_
+
+#include <linux/types.h>
+
+/* Just some random number */
+#define TCPDIAG_GETSOCK 18
+#define DCCPDIAG_GETSOCK 19
+
+#define INET_DIAG_GETSOCK_MAX 24
+
+/* Socket identity */
+struct inet_diag_sockid {
+	__be16	idiag_sport;
+	__be16	idiag_dport;
+	__be32	idiag_src[4];
+	__be32	idiag_dst[4];
+	__u32	idiag_if;
+	__u32	idiag_cookie[2];
+#define INET_DIAG_NOCOOKIE (~0U)
+};
+
+/* Request structure */
+
+struct inet_diag_req {
+	__u8	idiag_family;		/* Family of addresses. */
+	__u8	idiag_src_len;
+	__u8	idiag_dst_len;
+	__u8	idiag_ext;		/* Query extended information */
+
+	struct inet_diag_sockid id;
+
+	__u32	idiag_states;		/* States to dump */
+	__u32	idiag_dbs;		/* Tables to dump (NI) */
+};
+
+struct inet_diag_req_v2 {
+	__u8	sdiag_family;
+	__u8	sdiag_protocol;
+	__u8	idiag_ext;
+	__u8	pad;
+	__u32	idiag_states;
+	struct inet_diag_sockid id;
+};
+
+enum {
+	INET_DIAG_REQ_NONE,
+	INET_DIAG_REQ_BYTECODE,
+};
+
+#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE
+
+/* Bytecode is sequence of 4 byte commands followed by variable arguments.
+ * All the commands identified by "code" are conditional jumps forward:
+ * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be
+ * length of the command and its arguments.
+ */
+ 
+struct inet_diag_bc_op {
+	unsigned char	code;
+	unsigned char	yes;
+	unsigned short	no;
+};
+
+enum {
+	INET_DIAG_BC_NOP,
+	INET_DIAG_BC_JMP,
+	INET_DIAG_BC_S_GE,
+	INET_DIAG_BC_S_LE,
+	INET_DIAG_BC_D_GE,
+	INET_DIAG_BC_D_LE,
+	INET_DIAG_BC_AUTO,
+	INET_DIAG_BC_S_COND,
+	INET_DIAG_BC_D_COND,
+};
+
+struct inet_diag_hostcond {
+	__u8	family;
+	__u8	prefix_len;
+	int	port;
+	__be32	addr[0];
+};
+
+/* Base info structure. It contains socket identity (addrs/ports/cookie)
+ * and, alas, the information shown by netstat. */
+struct inet_diag_msg {
+	__u8	idiag_family;
+	__u8	idiag_state;
+	__u8	idiag_timer;
+	__u8	idiag_retrans;
+
+	struct inet_diag_sockid id;
+
+	__u32	idiag_expires;
+	__u32	idiag_rqueue;
+	__u32	idiag_wqueue;
+	__u32	idiag_uid;
+	__u32	idiag_inode;
+};
+
+/* Extensions */
+
+enum {
+	INET_DIAG_NONE,
+	INET_DIAG_MEMINFO,
+	INET_DIAG_INFO,
+	INET_DIAG_VEGASINFO,
+	INET_DIAG_CONG,
+	INET_DIAG_TOS,
+	INET_DIAG_TCLASS,
+	INET_DIAG_SKMEMINFO,
+};
+
+#define INET_DIAG_MAX INET_DIAG_SKMEMINFO
+
+
+/* INET_DIAG_MEM */
+
+struct inet_diag_meminfo {
+	__u32	idiag_rmem;
+	__u32	idiag_wmem;
+	__u32	idiag_fmem;
+	__u32	idiag_tmem;
+};
+
+/* INET_DIAG_VEGASINFO */
+
+struct tcpvegas_info {
+	__u32	tcpv_enabled;
+	__u32	tcpv_rttcnt;
+	__u32	tcpv_rtt;
+	__u32	tcpv_minrtt;
+};
+
+
+#endif /* _UAPI_INET_DIAG_H_ */
diff --git a/include/uapi/linux/inotify.h b/include/uapi/linux/inotify.h
new file mode 100644
index 0000000..e6bf35b
--- /dev/null
+++ b/include/uapi/linux/inotify.h
@@ -0,0 +1,74 @@
+/*
+ * Inode based directory notification for Linux
+ *
+ * Copyright (C) 2005 John McCutchan
+ */
+
+#ifndef _UAPI_LINUX_INOTIFY_H
+#define _UAPI_LINUX_INOTIFY_H
+
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+#include <linux/types.h>
+
+/*
+ * struct inotify_event - structure read from the inotify device for each event
+ *
+ * When you are watching a directory, you will receive the filename for events
+ * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd.
+ */
+struct inotify_event {
+	__s32		wd;		/* watch descriptor */
+	__u32		mask;		/* watch mask */
+	__u32		cookie;		/* cookie to synchronize two events */
+	__u32		len;		/* length (including nulls) of name */
+	char		name[0];	/* stub for possible name */
+};
+
+/* the following are legal, implemented events that user-space can watch for */
+#define IN_ACCESS		0x00000001	/* File was accessed */
+#define IN_MODIFY		0x00000002	/* File was modified */
+#define IN_ATTRIB		0x00000004	/* Metadata changed */
+#define IN_CLOSE_WRITE		0x00000008	/* Writtable file was closed */
+#define IN_CLOSE_NOWRITE	0x00000010	/* Unwrittable file closed */
+#define IN_OPEN			0x00000020	/* File was opened */
+#define IN_MOVED_FROM		0x00000040	/* File was moved from X */
+#define IN_MOVED_TO		0x00000080	/* File was moved to Y */
+#define IN_CREATE		0x00000100	/* Subfile was created */
+#define IN_DELETE		0x00000200	/* Subfile was deleted */
+#define IN_DELETE_SELF		0x00000400	/* Self was deleted */
+#define IN_MOVE_SELF		0x00000800	/* Self was moved */
+
+/* the following are legal events.  they are sent as needed to any watch */
+#define IN_UNMOUNT		0x00002000	/* Backing fs was unmounted */
+#define IN_Q_OVERFLOW		0x00004000	/* Event queued overflowed */
+#define IN_IGNORED		0x00008000	/* File was ignored */
+
+/* helper events */
+#define IN_CLOSE		(IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */
+#define IN_MOVE			(IN_MOVED_FROM | IN_MOVED_TO) /* moves */
+
+/* special flags */
+#define IN_ONLYDIR		0x01000000	/* only watch the path if it is a directory */
+#define IN_DONT_FOLLOW		0x02000000	/* don't follow a sym link */
+#define IN_EXCL_UNLINK		0x04000000	/* exclude events on unlinked objects */
+#define IN_MASK_ADD		0x20000000	/* add to the mask of an already existing watch */
+#define IN_ISDIR		0x40000000	/* event occurred against dir */
+#define IN_ONESHOT		0x80000000	/* only send event once */
+
+/*
+ * All of the events - we build the list by hand so that we can add flags in
+ * the future and not break backward compatibility.  Apps will get only the
+ * events that they originally wanted.  Be sure to add new events here!
+ */
+#define IN_ALL_EVENTS	(IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \
+			 IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \
+			 IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \
+			 IN_MOVE_SELF)
+
+/* Flags for sys_inotify_init1.  */
+#define IN_CLOEXEC O_CLOEXEC
+#define IN_NONBLOCK O_NONBLOCK
+
+
+#endif /* _UAPI_LINUX_INOTIFY_H */
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
new file mode 100644
index 0000000..5588285
--- /dev/null
+++ b/include/uapi/linux/input.h
@@ -0,0 +1,1153 @@
+/*
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _UAPI_INPUT_H
+#define _UAPI_INPUT_H
+
+
+#ifndef __KERNEL__
+#include <sys/time.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <linux/types.h>
+#endif
+
+
+/*
+ * The event structure itself
+ */
+
+struct input_event {
+	struct timeval time;
+	__u16 type;
+	__u16 code;
+	__s32 value;
+};
+
+/*
+ * Protocol version.
+ */
+
+#define EV_VERSION		0x010001
+
+/*
+ * IOCTLs (0x00 - 0x7f)
+ */
+
+struct input_id {
+	__u16 bustype;
+	__u16 vendor;
+	__u16 product;
+	__u16 version;
+};
+
+/**
+ * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
+ * @value: latest reported value for the axis.
+ * @minimum: specifies minimum value for the axis.
+ * @maximum: specifies maximum value for the axis.
+ * @fuzz: specifies fuzz value that is used to filter noise from
+ *	the event stream.
+ * @flat: values that are within this value will be discarded by
+ *	joydev interface and reported as 0 instead.
+ * @resolution: specifies resolution for the values reported for
+ *	the axis.
+ *
+ * Note that input core does not clamp reported values to the
+ * [minimum, maximum] limits, such task is left to userspace.
+ *
+ * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
+ * units per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ */
+struct input_absinfo {
+	__s32 value;
+	__s32 minimum;
+	__s32 maximum;
+	__s32 fuzz;
+	__s32 flat;
+	__s32 resolution;
+};
+
+/**
+ * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
+ * @scancode: scancode represented in machine-endian form.
+ * @len: length of the scancode that resides in @scancode buffer.
+ * @index: index in the keymap, may be used instead of scancode
+ * @flags: allows to specify how kernel should handle the request. For
+ *	example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
+ *	should perform lookup in keymap by @index instead of @scancode
+ * @keycode: key code assigned to this scancode
+ *
+ * The structure is used to retrieve and modify keymap data. Users have
+ * option of performing lookup either by @scancode itself or by @index
+ * in keymap entry. EVIOCGKEYCODE will also return scancode or index
+ * (depending on which element was used to perform lookup).
+ */
+struct input_keymap_entry {
+#define INPUT_KEYMAP_BY_INDEX	(1 << 0)
+	__u8  flags;
+	__u8  len;
+	__u16 index;
+	__u32 keycode;
+	__u8  scancode[32];
+};
+
+#define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
+#define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
+#define EVIOCGREP		_IOR('E', 0x03, unsigned int[2])	/* get repeat settings */
+#define EVIOCSREP		_IOW('E', 0x03, unsigned int[2])	/* set repeat settings */
+
+#define EVIOCGKEYCODE		_IOR('E', 0x04, unsigned int[2])        /* get keycode */
+#define EVIOCGKEYCODE_V2	_IOR('E', 0x04, struct input_keymap_entry)
+#define EVIOCSKEYCODE		_IOW('E', 0x04, unsigned int[2])        /* set keycode */
+#define EVIOCSKEYCODE_V2	_IOW('E', 0x04, struct input_keymap_entry)
+
+#define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
+#define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
+#define EVIOCGUNIQ(len)		_IOC(_IOC_READ, 'E', 0x08, len)		/* get unique identifier */
+#define EVIOCGPROP(len)		_IOC(_IOC_READ, 'E', 0x09, len)		/* get device properties */
+
+/**
+ * EVIOCGMTSLOTS(len) - get MT slot values
+ * @len: size of the data buffer in bytes
+ *
+ * The ioctl buffer argument should be binary equivalent to
+ *
+ * struct input_mt_request_layout {
+ *	__u32 code;
+ *	__s32 values[num_slots];
+ * };
+ *
+ * where num_slots is the (arbitrary) number of MT slots to extract.
+ *
+ * The ioctl size argument (len) is the size of the buffer, which
+ * should satisfy len = (num_slots + 1) * sizeof(__s32).  If len is
+ * too small to fit all available slots, the first num_slots are
+ * returned.
+ *
+ * Before the call, code is set to the wanted ABS_MT event type. On
+ * return, values[] is filled with the slot values for the specified
+ * ABS_MT code.
+ *
+ * If the request code is not an ABS_MT value, -EINVAL is returned.
+ */
+#define EVIOCGMTSLOTS(len)	_IOC(_IOC_READ, 'E', 0x0a, len)
+
+#define EVIOCGKEY(len)		_IOC(_IOC_READ, 'E', 0x18, len)		/* get global key state */
+#define EVIOCGLED(len)		_IOC(_IOC_READ, 'E', 0x19, len)		/* get all LEDs */
+#define EVIOCGSND(len)		_IOC(_IOC_READ, 'E', 0x1a, len)		/* get all sounds status */
+#define EVIOCGSW(len)		_IOC(_IOC_READ, 'E', 0x1b, len)		/* get all switch states */
+
+#define EVIOCGBIT(ev,len)	_IOC(_IOC_READ, 'E', 0x20 + (ev), len)	/* get event bits */
+#define EVIOCGABS(abs)		_IOR('E', 0x40 + (abs), struct input_absinfo)	/* get abs value/limits */
+#define EVIOCSABS(abs)		_IOW('E', 0xc0 + (abs), struct input_absinfo)	/* set abs value/limits */
+
+#define EVIOCSFF		_IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect))	/* send a force effect to a force feedback device */
+#define EVIOCRMFF		_IOW('E', 0x81, int)			/* Erase a force effect */
+#define EVIOCGEFFECTS		_IOR('E', 0x84, int)			/* Report number of effects playable at the same time */
+
+#define EVIOCGRAB		_IOW('E', 0x90, int)			/* Grab/Release device */
+
+#define EVIOCSCLOCKID		_IOW('E', 0xa0, int)			/* Set clockid to be used for timestamps */
+
+/*
+ * Device properties and quirks
+ */
+
+#define INPUT_PROP_POINTER		0x00	/* needs a pointer */
+#define INPUT_PROP_DIRECT		0x01	/* direct input devices */
+#define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
+#define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
+
+#define INPUT_PROP_MAX			0x1f
+#define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)
+
+/*
+ * Event types
+ */
+
+#define EV_SYN			0x00
+#define EV_KEY			0x01
+#define EV_REL			0x02
+#define EV_ABS			0x03
+#define EV_MSC			0x04
+#define EV_SW			0x05
+#define EV_LED			0x11
+#define EV_SND			0x12
+#define EV_REP			0x14
+#define EV_FF			0x15
+#define EV_PWR			0x16
+#define EV_FF_STATUS		0x17
+#define EV_MAX			0x1f
+#define EV_CNT			(EV_MAX+1)
+
+/*
+ * Synchronization events.
+ */
+
+#define SYN_REPORT		0
+#define SYN_CONFIG		1
+#define SYN_MT_REPORT		2
+#define SYN_DROPPED		3
+
+/*
+ * Keys and buttons
+ *
+ * Most of the keys/buttons are modeled after USB HUT 1.12
+ * (see http://www.usb.org/developers/hidpage).
+ * Abbreviations in the comments:
+ * AC - Application Control
+ * AL - Application Launch Button
+ * SC - System Control
+ */
+
+#define KEY_RESERVED		0
+#define KEY_ESC			1
+#define KEY_1			2
+#define KEY_2			3
+#define KEY_3			4
+#define KEY_4			5
+#define KEY_5			6
+#define KEY_6			7
+#define KEY_7			8
+#define KEY_8			9
+#define KEY_9			10
+#define KEY_0			11
+#define KEY_MINUS		12
+#define KEY_EQUAL		13
+#define KEY_BACKSPACE		14
+#define KEY_TAB			15
+#define KEY_Q			16
+#define KEY_W			17
+#define KEY_E			18
+#define KEY_R			19
+#define KEY_T			20
+#define KEY_Y			21
+#define KEY_U			22
+#define KEY_I			23
+#define KEY_O			24
+#define KEY_P			25
+#define KEY_LEFTBRACE		26
+#define KEY_RIGHTBRACE		27
+#define KEY_ENTER		28
+#define KEY_LEFTCTRL		29
+#define KEY_A			30
+#define KEY_S			31
+#define KEY_D			32
+#define KEY_F			33
+#define KEY_G			34
+#define KEY_H			35
+#define KEY_J			36
+#define KEY_K			37
+#define KEY_L			38
+#define KEY_SEMICOLON		39
+#define KEY_APOSTROPHE		40
+#define KEY_GRAVE		41
+#define KEY_LEFTSHIFT		42
+#define KEY_BACKSLASH		43
+#define KEY_Z			44
+#define KEY_X			45
+#define KEY_C			46
+#define KEY_V			47
+#define KEY_B			48
+#define KEY_N			49
+#define KEY_M			50
+#define KEY_COMMA		51
+#define KEY_DOT			52
+#define KEY_SLASH		53
+#define KEY_RIGHTSHIFT		54
+#define KEY_KPASTERISK		55
+#define KEY_LEFTALT		56
+#define KEY_SPACE		57
+#define KEY_CAPSLOCK		58
+#define KEY_F1			59
+#define KEY_F2			60
+#define KEY_F3			61
+#define KEY_F4			62
+#define KEY_F5			63
+#define KEY_F6			64
+#define KEY_F7			65
+#define KEY_F8			66
+#define KEY_F9			67
+#define KEY_F10			68
+#define KEY_NUMLOCK		69
+#define KEY_SCROLLLOCK		70
+#define KEY_KP7			71
+#define KEY_KP8			72
+#define KEY_KP9			73
+#define KEY_KPMINUS		74
+#define KEY_KP4			75
+#define KEY_KP5			76
+#define KEY_KP6			77
+#define KEY_KPPLUS		78
+#define KEY_KP1			79
+#define KEY_KP2			80
+#define KEY_KP3			81
+#define KEY_KP0			82
+#define KEY_KPDOT		83
+
+#define KEY_ZENKAKUHANKAKU	85
+#define KEY_102ND		86
+#define KEY_F11			87
+#define KEY_F12			88
+#define KEY_RO			89
+#define KEY_KATAKANA		90
+#define KEY_HIRAGANA		91
+#define KEY_HENKAN		92
+#define KEY_KATAKANAHIRAGANA	93
+#define KEY_MUHENKAN		94
+#define KEY_KPJPCOMMA		95
+#define KEY_KPENTER		96
+#define KEY_RIGHTCTRL		97
+#define KEY_KPSLASH		98
+#define KEY_SYSRQ		99
+#define KEY_RIGHTALT		100
+#define KEY_LINEFEED		101
+#define KEY_HOME		102
+#define KEY_UP			103
+#define KEY_PAGEUP		104
+#define KEY_LEFT		105
+#define KEY_RIGHT		106
+#define KEY_END			107
+#define KEY_DOWN		108
+#define KEY_PAGEDOWN		109
+#define KEY_INSERT		110
+#define KEY_DELETE		111
+#define KEY_MACRO		112
+#define KEY_MUTE		113
+#define KEY_VOLUMEDOWN		114
+#define KEY_VOLUMEUP		115
+#define KEY_POWER		116	/* SC System Power Down */
+#define KEY_KPEQUAL		117
+#define KEY_KPPLUSMINUS		118
+#define KEY_PAUSE		119
+#define KEY_SCALE		120	/* AL Compiz Scale (Expose) */
+
+#define KEY_KPCOMMA		121
+#define KEY_HANGEUL		122
+#define KEY_HANGUEL		KEY_HANGEUL
+#define KEY_HANJA		123
+#define KEY_YEN			124
+#define KEY_LEFTMETA		125
+#define KEY_RIGHTMETA		126
+#define KEY_COMPOSE		127
+
+#define KEY_STOP		128	/* AC Stop */
+#define KEY_AGAIN		129
+#define KEY_PROPS		130	/* AC Properties */
+#define KEY_UNDO		131	/* AC Undo */
+#define KEY_FRONT		132
+#define KEY_COPY		133	/* AC Copy */
+#define KEY_OPEN		134	/* AC Open */
+#define KEY_PASTE		135	/* AC Paste */
+#define KEY_FIND		136	/* AC Search */
+#define KEY_CUT			137	/* AC Cut */
+#define KEY_HELP		138	/* AL Integrated Help Center */
+#define KEY_MENU		139	/* Menu (show menu) */
+#define KEY_CALC		140	/* AL Calculator */
+#define KEY_SETUP		141
+#define KEY_SLEEP		142	/* SC System Sleep */
+#define KEY_WAKEUP		143	/* System Wake Up */
+#define KEY_FILE		144	/* AL Local Machine Browser */
+#define KEY_SENDFILE		145
+#define KEY_DELETEFILE		146
+#define KEY_XFER		147
+#define KEY_PROG1		148
+#define KEY_PROG2		149
+#define KEY_WWW			150	/* AL Internet Browser */
+#define KEY_MSDOS		151
+#define KEY_COFFEE		152	/* AL Terminal Lock/Screensaver */
+#define KEY_SCREENLOCK		KEY_COFFEE
+#define KEY_DIRECTION		153
+#define KEY_CYCLEWINDOWS	154
+#define KEY_MAIL		155
+#define KEY_BOOKMARKS		156	/* AC Bookmarks */
+#define KEY_COMPUTER		157
+#define KEY_BACK		158	/* AC Back */
+#define KEY_FORWARD		159	/* AC Forward */
+#define KEY_CLOSECD		160
+#define KEY_EJECTCD		161
+#define KEY_EJECTCLOSECD	162
+#define KEY_NEXTSONG		163
+#define KEY_PLAYPAUSE		164
+#define KEY_PREVIOUSSONG	165
+#define KEY_STOPCD		166
+#define KEY_RECORD		167
+#define KEY_REWIND		168
+#define KEY_PHONE		169	/* Media Select Telephone */
+#define KEY_ISO			170
+#define KEY_CONFIG		171	/* AL Consumer Control Configuration */
+#define KEY_HOMEPAGE		172	/* AC Home */
+#define KEY_REFRESH		173	/* AC Refresh */
+#define KEY_EXIT		174	/* AC Exit */
+#define KEY_MOVE		175
+#define KEY_EDIT		176
+#define KEY_SCROLLUP		177
+#define KEY_SCROLLDOWN		178
+#define KEY_KPLEFTPAREN		179
+#define KEY_KPRIGHTPAREN	180
+#define KEY_NEW			181	/* AC New */
+#define KEY_REDO		182	/* AC Redo/Repeat */
+
+#define KEY_F13			183
+#define KEY_F14			184
+#define KEY_F15			185
+#define KEY_F16			186
+#define KEY_F17			187
+#define KEY_F18			188
+#define KEY_F19			189
+#define KEY_F20			190
+#define KEY_F21			191
+#define KEY_F22			192
+#define KEY_F23			193
+#define KEY_F24			194
+
+#define KEY_PLAYCD		200
+#define KEY_PAUSECD		201
+#define KEY_PROG3		202
+#define KEY_PROG4		203
+#define KEY_DASHBOARD		204	/* AL Dashboard */
+#define KEY_SUSPEND		205
+#define KEY_CLOSE		206	/* AC Close */
+#define KEY_PLAY		207
+#define KEY_FASTFORWARD		208
+#define KEY_BASSBOOST		209
+#define KEY_PRINT		210	/* AC Print */
+#define KEY_HP			211
+#define KEY_CAMERA		212
+#define KEY_SOUND		213
+#define KEY_QUESTION		214
+#define KEY_EMAIL		215
+#define KEY_CHAT		216
+#define KEY_SEARCH		217
+#define KEY_CONNECT		218
+#define KEY_FINANCE		219	/* AL Checkbook/Finance */
+#define KEY_SPORT		220
+#define KEY_SHOP		221
+#define KEY_ALTERASE		222
+#define KEY_CANCEL		223	/* AC Cancel */
+#define KEY_BRIGHTNESSDOWN	224
+#define KEY_BRIGHTNESSUP	225
+#define KEY_MEDIA		226
+
+#define KEY_SWITCHVIDEOMODE	227	/* Cycle between available video
+					   outputs (Monitor/LCD/TV-out/etc) */
+#define KEY_KBDILLUMTOGGLE	228
+#define KEY_KBDILLUMDOWN	229
+#define KEY_KBDILLUMUP		230
+
+#define KEY_SEND		231	/* AC Send */
+#define KEY_REPLY		232	/* AC Reply */
+#define KEY_FORWARDMAIL		233	/* AC Forward Msg */
+#define KEY_SAVE		234	/* AC Save */
+#define KEY_DOCUMENTS		235
+
+#define KEY_BATTERY		236
+
+#define KEY_BLUETOOTH		237
+#define KEY_WLAN		238
+#define KEY_UWB			239
+
+#define KEY_UNKNOWN		240
+
+#define KEY_VIDEO_NEXT		241	/* drive next video source */
+#define KEY_VIDEO_PREV		242	/* drive previous video source */
+#define KEY_BRIGHTNESS_CYCLE	243	/* brightness up, after max is min */
+#define KEY_BRIGHTNESS_ZERO	244	/* brightness off, use ambient */
+#define KEY_DISPLAY_OFF		245	/* display device to off state */
+
+#define KEY_WIMAX		246
+#define KEY_RFKILL		247	/* Key that controls all radios */
+
+#define KEY_MICMUTE		248	/* Mute / unmute the microphone */
+
+/* Code 255 is reserved for special needs of AT keyboard driver */
+
+#define BTN_MISC		0x100
+#define BTN_0			0x100
+#define BTN_1			0x101
+#define BTN_2			0x102
+#define BTN_3			0x103
+#define BTN_4			0x104
+#define BTN_5			0x105
+#define BTN_6			0x106
+#define BTN_7			0x107
+#define BTN_8			0x108
+#define BTN_9			0x109
+
+#define BTN_MOUSE		0x110
+#define BTN_LEFT		0x110
+#define BTN_RIGHT		0x111
+#define BTN_MIDDLE		0x112
+#define BTN_SIDE		0x113
+#define BTN_EXTRA		0x114
+#define BTN_FORWARD		0x115
+#define BTN_BACK		0x116
+#define BTN_TASK		0x117
+
+#define BTN_JOYSTICK		0x120
+#define BTN_TRIGGER		0x120
+#define BTN_THUMB		0x121
+#define BTN_THUMB2		0x122
+#define BTN_TOP			0x123
+#define BTN_TOP2		0x124
+#define BTN_PINKIE		0x125
+#define BTN_BASE		0x126
+#define BTN_BASE2		0x127
+#define BTN_BASE3		0x128
+#define BTN_BASE4		0x129
+#define BTN_BASE5		0x12a
+#define BTN_BASE6		0x12b
+#define BTN_DEAD		0x12f
+
+#define BTN_GAMEPAD		0x130
+#define BTN_A			0x130
+#define BTN_B			0x131
+#define BTN_C			0x132
+#define BTN_X			0x133
+#define BTN_Y			0x134
+#define BTN_Z			0x135
+#define BTN_TL			0x136
+#define BTN_TR			0x137
+#define BTN_TL2			0x138
+#define BTN_TR2			0x139
+#define BTN_SELECT		0x13a
+#define BTN_START		0x13b
+#define BTN_MODE		0x13c
+#define BTN_THUMBL		0x13d
+#define BTN_THUMBR		0x13e
+
+#define BTN_DIGI		0x140
+#define BTN_TOOL_PEN		0x140
+#define BTN_TOOL_RUBBER		0x141
+#define BTN_TOOL_BRUSH		0x142
+#define BTN_TOOL_PENCIL		0x143
+#define BTN_TOOL_AIRBRUSH	0x144
+#define BTN_TOOL_FINGER		0x145
+#define BTN_TOOL_MOUSE		0x146
+#define BTN_TOOL_LENS		0x147
+#define BTN_TOOL_QUINTTAP	0x148	/* Five fingers on trackpad */
+#define BTN_TOUCH		0x14a
+#define BTN_STYLUS		0x14b
+#define BTN_STYLUS2		0x14c
+#define BTN_TOOL_DOUBLETAP	0x14d
+#define BTN_TOOL_TRIPLETAP	0x14e
+#define BTN_TOOL_QUADTAP	0x14f	/* Four fingers on trackpad */
+
+#define BTN_WHEEL		0x150
+#define BTN_GEAR_DOWN		0x150
+#define BTN_GEAR_UP		0x151
+
+#define KEY_OK			0x160
+#define KEY_SELECT		0x161
+#define KEY_GOTO		0x162
+#define KEY_CLEAR		0x163
+#define KEY_POWER2		0x164
+#define KEY_OPTION		0x165
+#define KEY_INFO		0x166	/* AL OEM Features/Tips/Tutorial */
+#define KEY_TIME		0x167
+#define KEY_VENDOR		0x168
+#define KEY_ARCHIVE		0x169
+#define KEY_PROGRAM		0x16a	/* Media Select Program Guide */
+#define KEY_CHANNEL		0x16b
+#define KEY_FAVORITES		0x16c
+#define KEY_EPG			0x16d
+#define KEY_PVR			0x16e	/* Media Select Home */
+#define KEY_MHP			0x16f
+#define KEY_LANGUAGE		0x170
+#define KEY_TITLE		0x171
+#define KEY_SUBTITLE		0x172
+#define KEY_ANGLE		0x173
+#define KEY_ZOOM		0x174
+#define KEY_MODE		0x175
+#define KEY_KEYBOARD		0x176
+#define KEY_SCREEN		0x177
+#define KEY_PC			0x178	/* Media Select Computer */
+#define KEY_TV			0x179	/* Media Select TV */
+#define KEY_TV2			0x17a	/* Media Select Cable */
+#define KEY_VCR			0x17b	/* Media Select VCR */
+#define KEY_VCR2		0x17c	/* VCR Plus */
+#define KEY_SAT			0x17d	/* Media Select Satellite */
+#define KEY_SAT2		0x17e
+#define KEY_CD			0x17f	/* Media Select CD */
+#define KEY_TAPE		0x180	/* Media Select Tape */
+#define KEY_RADIO		0x181
+#define KEY_TUNER		0x182	/* Media Select Tuner */
+#define KEY_PLAYER		0x183
+#define KEY_TEXT		0x184
+#define KEY_DVD			0x185	/* Media Select DVD */
+#define KEY_AUX			0x186
+#define KEY_MP3			0x187
+#define KEY_AUDIO		0x188	/* AL Audio Browser */
+#define KEY_VIDEO		0x189	/* AL Movie Browser */
+#define KEY_DIRECTORY		0x18a
+#define KEY_LIST		0x18b
+#define KEY_MEMO		0x18c	/* Media Select Messages */
+#define KEY_CALENDAR		0x18d
+#define KEY_RED			0x18e
+#define KEY_GREEN		0x18f
+#define KEY_YELLOW		0x190
+#define KEY_BLUE		0x191
+#define KEY_CHANNELUP		0x192	/* Channel Increment */
+#define KEY_CHANNELDOWN		0x193	/* Channel Decrement */
+#define KEY_FIRST		0x194
+#define KEY_LAST		0x195	/* Recall Last */
+#define KEY_AB			0x196
+#define KEY_NEXT		0x197
+#define KEY_RESTART		0x198
+#define KEY_SLOW		0x199
+#define KEY_SHUFFLE		0x19a
+#define KEY_BREAK		0x19b
+#define KEY_PREVIOUS		0x19c
+#define KEY_DIGITS		0x19d
+#define KEY_TEEN		0x19e
+#define KEY_TWEN		0x19f
+#define KEY_VIDEOPHONE		0x1a0	/* Media Select Video Phone */
+#define KEY_GAMES		0x1a1	/* Media Select Games */
+#define KEY_ZOOMIN		0x1a2	/* AC Zoom In */
+#define KEY_ZOOMOUT		0x1a3	/* AC Zoom Out */
+#define KEY_ZOOMRESET		0x1a4	/* AC Zoom */
+#define KEY_WORDPROCESSOR	0x1a5	/* AL Word Processor */
+#define KEY_EDITOR		0x1a6	/* AL Text Editor */
+#define KEY_SPREADSHEET		0x1a7	/* AL Spreadsheet */
+#define KEY_GRAPHICSEDITOR	0x1a8	/* AL Graphics Editor */
+#define KEY_PRESENTATION	0x1a9	/* AL Presentation App */
+#define KEY_DATABASE		0x1aa	/* AL Database App */
+#define KEY_NEWS		0x1ab	/* AL Newsreader */
+#define KEY_VOICEMAIL		0x1ac	/* AL Voicemail */
+#define KEY_ADDRESSBOOK		0x1ad	/* AL Contacts/Address Book */
+#define KEY_MESSENGER		0x1ae	/* AL Instant Messaging */
+#define KEY_DISPLAYTOGGLE	0x1af	/* Turn display (LCD) on and off */
+#define KEY_SPELLCHECK		0x1b0   /* AL Spell Check */
+#define KEY_LOGOFF		0x1b1   /* AL Logoff */
+
+#define KEY_DOLLAR		0x1b2
+#define KEY_EURO		0x1b3
+
+#define KEY_FRAMEBACK		0x1b4	/* Consumer - transport controls */
+#define KEY_FRAMEFORWARD	0x1b5
+#define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
+#define KEY_10CHANNELSUP	0x1b8	/* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN	0x1b9	/* 10 channels down (10-) */
+#define KEY_IMAGES		0x1ba	/* AL Image Browser */
+
+#define KEY_DEL_EOL		0x1c0
+#define KEY_DEL_EOS		0x1c1
+#define KEY_INS_LINE		0x1c2
+#define KEY_DEL_LINE		0x1c3
+
+#define KEY_FN			0x1d0
+#define KEY_FN_ESC		0x1d1
+#define KEY_FN_F1		0x1d2
+#define KEY_FN_F2		0x1d3
+#define KEY_FN_F3		0x1d4
+#define KEY_FN_F4		0x1d5
+#define KEY_FN_F5		0x1d6
+#define KEY_FN_F6		0x1d7
+#define KEY_FN_F7		0x1d8
+#define KEY_FN_F8		0x1d9
+#define KEY_FN_F9		0x1da
+#define KEY_FN_F10		0x1db
+#define KEY_FN_F11		0x1dc
+#define KEY_FN_F12		0x1dd
+#define KEY_FN_1		0x1de
+#define KEY_FN_2		0x1df
+#define KEY_FN_D		0x1e0
+#define KEY_FN_E		0x1e1
+#define KEY_FN_F		0x1e2
+#define KEY_FN_S		0x1e3
+#define KEY_FN_B		0x1e4
+
+#define KEY_BRL_DOT1		0x1f1
+#define KEY_BRL_DOT2		0x1f2
+#define KEY_BRL_DOT3		0x1f3
+#define KEY_BRL_DOT4		0x1f4
+#define KEY_BRL_DOT5		0x1f5
+#define KEY_BRL_DOT6		0x1f6
+#define KEY_BRL_DOT7		0x1f7
+#define KEY_BRL_DOT8		0x1f8
+#define KEY_BRL_DOT9		0x1f9
+#define KEY_BRL_DOT10		0x1fa
+
+#define KEY_NUMERIC_0		0x200	/* used by phones, remote controls, */
+#define KEY_NUMERIC_1		0x201	/* and other keypads */
+#define KEY_NUMERIC_2		0x202
+#define KEY_NUMERIC_3		0x203
+#define KEY_NUMERIC_4		0x204
+#define KEY_NUMERIC_5		0x205
+#define KEY_NUMERIC_6		0x206
+#define KEY_NUMERIC_7		0x207
+#define KEY_NUMERIC_8		0x208
+#define KEY_NUMERIC_9		0x209
+#define KEY_NUMERIC_STAR	0x20a
+#define KEY_NUMERIC_POUND	0x20b
+
+#define KEY_CAMERA_FOCUS	0x210
+#define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
+
+#define KEY_TOUCHPAD_TOGGLE	0x212	/* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON		0x213
+#define KEY_TOUCHPAD_OFF	0x214
+
+#define KEY_CAMERA_ZOOMIN	0x215
+#define KEY_CAMERA_ZOOMOUT	0x216
+#define KEY_CAMERA_UP		0x217
+#define KEY_CAMERA_DOWN		0x218
+#define KEY_CAMERA_LEFT		0x219
+#define KEY_CAMERA_RIGHT	0x21a
+
+#define BTN_TRIGGER_HAPPY		0x2c0
+#define BTN_TRIGGER_HAPPY1		0x2c0
+#define BTN_TRIGGER_HAPPY2		0x2c1
+#define BTN_TRIGGER_HAPPY3		0x2c2
+#define BTN_TRIGGER_HAPPY4		0x2c3
+#define BTN_TRIGGER_HAPPY5		0x2c4
+#define BTN_TRIGGER_HAPPY6		0x2c5
+#define BTN_TRIGGER_HAPPY7		0x2c6
+#define BTN_TRIGGER_HAPPY8		0x2c7
+#define BTN_TRIGGER_HAPPY9		0x2c8
+#define BTN_TRIGGER_HAPPY10		0x2c9
+#define BTN_TRIGGER_HAPPY11		0x2ca
+#define BTN_TRIGGER_HAPPY12		0x2cb
+#define BTN_TRIGGER_HAPPY13		0x2cc
+#define BTN_TRIGGER_HAPPY14		0x2cd
+#define BTN_TRIGGER_HAPPY15		0x2ce
+#define BTN_TRIGGER_HAPPY16		0x2cf
+#define BTN_TRIGGER_HAPPY17		0x2d0
+#define BTN_TRIGGER_HAPPY18		0x2d1
+#define BTN_TRIGGER_HAPPY19		0x2d2
+#define BTN_TRIGGER_HAPPY20		0x2d3
+#define BTN_TRIGGER_HAPPY21		0x2d4
+#define BTN_TRIGGER_HAPPY22		0x2d5
+#define BTN_TRIGGER_HAPPY23		0x2d6
+#define BTN_TRIGGER_HAPPY24		0x2d7
+#define BTN_TRIGGER_HAPPY25		0x2d8
+#define BTN_TRIGGER_HAPPY26		0x2d9
+#define BTN_TRIGGER_HAPPY27		0x2da
+#define BTN_TRIGGER_HAPPY28		0x2db
+#define BTN_TRIGGER_HAPPY29		0x2dc
+#define BTN_TRIGGER_HAPPY30		0x2dd
+#define BTN_TRIGGER_HAPPY31		0x2de
+#define BTN_TRIGGER_HAPPY32		0x2df
+#define BTN_TRIGGER_HAPPY33		0x2e0
+#define BTN_TRIGGER_HAPPY34		0x2e1
+#define BTN_TRIGGER_HAPPY35		0x2e2
+#define BTN_TRIGGER_HAPPY36		0x2e3
+#define BTN_TRIGGER_HAPPY37		0x2e4
+#define BTN_TRIGGER_HAPPY38		0x2e5
+#define BTN_TRIGGER_HAPPY39		0x2e6
+#define BTN_TRIGGER_HAPPY40		0x2e7
+
+/* We avoid low common keys in module aliases so they don't get huge. */
+#define KEY_MIN_INTERESTING	KEY_MUTE
+#define KEY_MAX			0x2ff
+#define KEY_CNT			(KEY_MAX+1)
+
+/*
+ * Relative axes
+ */
+
+#define REL_X			0x00
+#define REL_Y			0x01
+#define REL_Z			0x02
+#define REL_RX			0x03
+#define REL_RY			0x04
+#define REL_RZ			0x05
+#define REL_HWHEEL		0x06
+#define REL_DIAL		0x07
+#define REL_WHEEL		0x08
+#define REL_MISC		0x09
+#define REL_MAX			0x0f
+#define REL_CNT			(REL_MAX+1)
+
+/*
+ * Absolute axes
+ */
+
+#define ABS_X			0x00
+#define ABS_Y			0x01
+#define ABS_Z			0x02
+#define ABS_RX			0x03
+#define ABS_RY			0x04
+#define ABS_RZ			0x05
+#define ABS_THROTTLE		0x06
+#define ABS_RUDDER		0x07
+#define ABS_WHEEL		0x08
+#define ABS_GAS			0x09
+#define ABS_BRAKE		0x0a
+#define ABS_HAT0X		0x10
+#define ABS_HAT0Y		0x11
+#define ABS_HAT1X		0x12
+#define ABS_HAT1Y		0x13
+#define ABS_HAT2X		0x14
+#define ABS_HAT2Y		0x15
+#define ABS_HAT3X		0x16
+#define ABS_HAT3Y		0x17
+#define ABS_PRESSURE		0x18
+#define ABS_DISTANCE		0x19
+#define ABS_TILT_X		0x1a
+#define ABS_TILT_Y		0x1b
+#define ABS_TOOL_WIDTH		0x1c
+
+#define ABS_VOLUME		0x20
+
+#define ABS_MISC		0x28
+
+#define ABS_MT_SLOT		0x2f	/* MT slot being modified */
+#define ABS_MT_TOUCH_MAJOR	0x30	/* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR	0x31	/* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR	0x32	/* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR	0x33	/* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION	0x34	/* Ellipse orientation */
+#define ABS_MT_POSITION_X	0x35	/* Center X touch position */
+#define ABS_MT_POSITION_Y	0x36	/* Center Y touch position */
+#define ABS_MT_TOOL_TYPE	0x37	/* Type of touching device */
+#define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
+#define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
+#define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
+#define ABS_MT_TOOL_X		0x3c	/* Center X tool position */
+#define ABS_MT_TOOL_Y		0x3d	/* Center Y tool position */
+
+
+#define ABS_MAX			0x3f
+#define ABS_CNT			(ABS_MAX+1)
+
+/*
+ * Switch events
+ */
+
+#define SW_LID			0x00  /* set = lid shut */
+#define SW_TABLET_MODE		0x01  /* set = tablet mode */
+#define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
+#define SW_RFKILL_ALL		0x03  /* rfkill master switch, type "any"
+					 set = radio enabled */
+#define SW_RADIO		SW_RFKILL_ALL	/* deprecated */
+#define SW_MICROPHONE_INSERT	0x04  /* set = inserted */
+#define SW_DOCK			0x05  /* set = plugged into dock */
+#define SW_LINEOUT_INSERT	0x06  /* set = inserted */
+#define SW_JACK_PHYSICAL_INSERT 0x07  /* set = mechanical switch set */
+#define SW_VIDEOOUT_INSERT	0x08  /* set = inserted */
+#define SW_CAMERA_LENS_COVER	0x09  /* set = lens covered */
+#define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
+#define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
+#define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
+#define SW_LINEIN_INSERT	0x0d  /* set = inserted */
+#define SW_MAX			0x0f
+#define SW_CNT			(SW_MAX+1)
+
+/*
+ * Misc events
+ */
+
+#define MSC_SERIAL		0x00
+#define MSC_PULSELED		0x01
+#define MSC_GESTURE		0x02
+#define MSC_RAW			0x03
+#define MSC_SCAN		0x04
+#define MSC_MAX			0x07
+#define MSC_CNT			(MSC_MAX+1)
+
+/*
+ * LEDs
+ */
+
+#define LED_NUML		0x00
+#define LED_CAPSL		0x01
+#define LED_SCROLLL		0x02
+#define LED_COMPOSE		0x03
+#define LED_KANA		0x04
+#define LED_SLEEP		0x05
+#define LED_SUSPEND		0x06
+#define LED_MUTE		0x07
+#define LED_MISC		0x08
+#define LED_MAIL		0x09
+#define LED_CHARGING		0x0a
+#define LED_MAX			0x0f
+#define LED_CNT			(LED_MAX+1)
+
+/*
+ * Autorepeat values
+ */
+
+#define REP_DELAY		0x00
+#define REP_PERIOD		0x01
+#define REP_MAX			0x01
+#define REP_CNT			(REP_MAX+1)
+
+/*
+ * Sounds
+ */
+
+#define SND_CLICK		0x00
+#define SND_BELL		0x01
+#define SND_TONE		0x02
+#define SND_MAX			0x07
+#define SND_CNT			(SND_MAX+1)
+
+/*
+ * IDs.
+ */
+
+#define ID_BUS			0
+#define ID_VENDOR		1
+#define ID_PRODUCT		2
+#define ID_VERSION		3
+
+#define BUS_PCI			0x01
+#define BUS_ISAPNP		0x02
+#define BUS_USB			0x03
+#define BUS_HIL			0x04
+#define BUS_BLUETOOTH		0x05
+#define BUS_VIRTUAL		0x06
+
+#define BUS_ISA			0x10
+#define BUS_I8042		0x11
+#define BUS_XTKBD		0x12
+#define BUS_RS232		0x13
+#define BUS_GAMEPORT		0x14
+#define BUS_PARPORT		0x15
+#define BUS_AMIGA		0x16
+#define BUS_ADB			0x17
+#define BUS_I2C			0x18
+#define BUS_HOST		0x19
+#define BUS_GSC			0x1A
+#define BUS_ATARI		0x1B
+#define BUS_SPI			0x1C
+
+/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER		0
+#define MT_TOOL_PEN		1
+#define MT_TOOL_MAX		1
+
+/*
+ * Values describing the status of a force-feedback effect
+ */
+#define FF_STATUS_STOPPED	0x00
+#define FF_STATUS_PLAYING	0x01
+#define FF_STATUS_MAX		0x01
+
+/*
+ * Structures used in ioctls to upload effects to a device
+ * They are pieces of a bigger structure (called ff_effect)
+ */
+
+/*
+ * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
+ * should not be used and have unspecified results.
+ */
+
+/**
+ * struct ff_replay - defines scheduling of the force-feedback effect
+ * @length: duration of the effect
+ * @delay: delay before effect should start playing
+ */
+struct ff_replay {
+	__u16 length;
+	__u16 delay;
+};
+
+/**
+ * struct ff_trigger - defines what triggers the force-feedback effect
+ * @button: number of the button triggering the effect
+ * @interval: controls how soon the effect can be re-triggered
+ */
+struct ff_trigger {
+	__u16 button;
+	__u16 interval;
+};
+
+/**
+ * struct ff_envelope - generic force-feedback effect envelope
+ * @attack_length: duration of the attack (ms)
+ * @attack_level: level at the beginning of the attack
+ * @fade_length: duration of fade (ms)
+ * @fade_level: level at the end of fade
+ *
+ * The @attack_level and @fade_level are absolute values; when applying
+ * envelope force-feedback core will convert to positive/negative
+ * value based on polarity of the default level of the effect.
+ * Valid range for the attack and fade levels is 0x0000 - 0x7fff
+ */
+struct ff_envelope {
+	__u16 attack_length;
+	__u16 attack_level;
+	__u16 fade_length;
+	__u16 fade_level;
+};
+
+/**
+ * struct ff_constant_effect - defines parameters of a constant force-feedback effect
+ * @level: strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_constant_effect {
+	__s16 level;
+	struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
+ * @start_level: beginning strength of the effect; may be negative
+ * @end_level: final strength of the effect; may be negative
+ * @envelope: envelope data
+ */
+struct ff_ramp_effect {
+	__s16 start_level;
+	__s16 end_level;
+	struct ff_envelope envelope;
+};
+
+/**
+ * struct ff_condition_effect - defines a spring or friction force-feedback effect
+ * @right_saturation: maximum level when joystick moved all way to the right
+ * @left_saturation: same for the left side
+ * @right_coeff: controls how fast the force grows when the joystick moves
+ *	to the right
+ * @left_coeff: same for the left side
+ * @deadband: size of the dead zone, where no force is produced
+ * @center: position of the dead zone
+ */
+struct ff_condition_effect {
+	__u16 right_saturation;
+	__u16 left_saturation;
+
+	__s16 right_coeff;
+	__s16 left_coeff;
+
+	__u16 deadband;
+	__s16 center;
+};
+
+/**
+ * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
+ * @waveform: kind of the effect (wave)
+ * @period: period of the wave (ms)
+ * @magnitude: peak value
+ * @offset: mean value of the wave (roughly)
+ * @phase: 'horizontal' shift
+ * @envelope: envelope data
+ * @custom_len: number of samples (FF_CUSTOM only)
+ * @custom_data: buffer of samples (FF_CUSTOM only)
+ *
+ * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
+ * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
+ * for the time being as no driver supports it yet.
+ *
+ * Note: the data pointed by custom_data is copied by the driver.
+ * You can therefore dispose of the memory after the upload/update.
+ */
+struct ff_periodic_effect {
+	__u16 waveform;
+	__u16 period;
+	__s16 magnitude;
+	__s16 offset;
+	__u16 phase;
+
+	struct ff_envelope envelope;
+
+	__u32 custom_len;
+	__s16 __user *custom_data;
+};
+
+/**
+ * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
+ * @strong_magnitude: magnitude of the heavy motor
+ * @weak_magnitude: magnitude of the light one
+ *
+ * Some rumble pads have two motors of different weight. Strong_magnitude
+ * represents the magnitude of the vibration generated by the heavy one.
+ */
+struct ff_rumble_effect {
+	__u16 strong_magnitude;
+	__u16 weak_magnitude;
+};
+
+/**
+ * struct ff_effect - defines force feedback effect
+ * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
+ *	FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
+ * @id: an unique id assigned to an effect
+ * @direction: direction of the effect
+ * @trigger: trigger conditions (struct ff_trigger)
+ * @replay: scheduling of the effect (struct ff_replay)
+ * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
+ *	ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
+ *	defining effect parameters
+ *
+ * This structure is sent through ioctl from the application to the driver.
+ * To create a new effect application should set its @id to -1; the kernel
+ * will return assigned @id which can later be used to update or delete
+ * this effect.
+ *
+ * Direction of the effect is encoded as follows:
+ *	0 deg -> 0x0000 (down)
+ *	90 deg -> 0x4000 (left)
+ *	180 deg -> 0x8000 (up)
+ *	270 deg -> 0xC000 (right)
+ */
+struct ff_effect {
+	__u16 type;
+	__s16 id;
+	__u16 direction;
+	struct ff_trigger trigger;
+	struct ff_replay replay;
+
+	union {
+		struct ff_constant_effect constant;
+		struct ff_ramp_effect ramp;
+		struct ff_periodic_effect periodic;
+		struct ff_condition_effect condition[2]; /* One for each axis */
+		struct ff_rumble_effect rumble;
+	} u;
+};
+
+/*
+ * Force feedback effect types
+ */
+
+#define FF_RUMBLE	0x50
+#define FF_PERIODIC	0x51
+#define FF_CONSTANT	0x52
+#define FF_SPRING	0x53
+#define FF_FRICTION	0x54
+#define FF_DAMPER	0x55
+#define FF_INERTIA	0x56
+#define FF_RAMP		0x57
+
+#define FF_EFFECT_MIN	FF_RUMBLE
+#define FF_EFFECT_MAX	FF_RAMP
+
+/*
+ * Force feedback periodic effect types
+ */
+
+#define FF_SQUARE	0x58
+#define FF_TRIANGLE	0x59
+#define FF_SINE		0x5a
+#define FF_SAW_UP	0x5b
+#define FF_SAW_DOWN	0x5c
+#define FF_CUSTOM	0x5d
+
+#define FF_WAVEFORM_MIN	FF_SQUARE
+#define FF_WAVEFORM_MAX	FF_CUSTOM
+
+/*
+ * Set ff device properties
+ */
+
+#define FF_GAIN		0x60
+#define FF_AUTOCENTER	0x61
+
+#define FF_MAX		0x7f
+#define FF_CNT		(FF_MAX+1)
+
+#endif /* _UAPI_INPUT_H */
diff --git a/include/linux/ioctl.h b/include/uapi/linux/ioctl.h
similarity index 100%
rename from include/linux/ioctl.h
rename to include/uapi/linux/ioctl.h
diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h
new file mode 100644
index 0000000..6cf06bf
--- /dev/null
+++ b/include/uapi/linux/ip.h
@@ -0,0 +1,136 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the IP protocol.
+ *
+ * Version:	@(#)ip.h	1.0.2	04/28/93
+ *
+ * Authors:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_IP_H
+#define _UAPI_LINUX_IP_H
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define IPTOS_TOS_MASK		0x1E
+#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
+#define	IPTOS_LOWDELAY		0x10
+#define	IPTOS_THROUGHPUT	0x08
+#define	IPTOS_RELIABILITY	0x04
+#define	IPTOS_MINCOST		0x02
+
+#define IPTOS_PREC_MASK		0xE0
+#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
+#define IPTOS_PREC_NETCONTROL           0xe0
+#define IPTOS_PREC_INTERNETCONTROL      0xc0
+#define IPTOS_PREC_CRITIC_ECP           0xa0
+#define IPTOS_PREC_FLASHOVERRIDE        0x80
+#define IPTOS_PREC_FLASH                0x60
+#define IPTOS_PREC_IMMEDIATE            0x40
+#define IPTOS_PREC_PRIORITY             0x20
+#define IPTOS_PREC_ROUTINE              0x00
+
+
+/* IP options */
+#define IPOPT_COPY		0x80
+#define IPOPT_CLASS_MASK	0x60
+#define IPOPT_NUMBER_MASK	0x1f
+
+#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
+#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
+#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
+
+#define	IPOPT_CONTROL		0x00
+#define	IPOPT_RESERVED1		0x20
+#define	IPOPT_MEASUREMENT	0x40
+#define	IPOPT_RESERVED2		0x60
+
+#define IPOPT_END	(0 |IPOPT_CONTROL)
+#define IPOPT_NOOP	(1 |IPOPT_CONTROL)
+#define IPOPT_SEC	(2 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_LSRR	(3 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_TIMESTAMP	(4 |IPOPT_MEASUREMENT)
+#define IPOPT_CIPSO	(6 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_RR	(7 |IPOPT_CONTROL)
+#define IPOPT_SID	(8 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_SSRR	(9 |IPOPT_CONTROL|IPOPT_COPY)
+#define IPOPT_RA	(20|IPOPT_CONTROL|IPOPT_COPY)
+
+#define IPVERSION	4
+#define MAXTTL		255
+#define IPDEFTTL	64
+
+#define IPOPT_OPTVAL 0
+#define IPOPT_OLEN   1
+#define IPOPT_OFFSET 2
+#define IPOPT_MINOFF 4
+#define MAX_IPOPTLEN 40
+#define IPOPT_NOP IPOPT_NOOP
+#define IPOPT_EOL IPOPT_END
+#define IPOPT_TS  IPOPT_TIMESTAMP
+
+#define	IPOPT_TS_TSONLY		0		/* timestamps only */
+#define	IPOPT_TS_TSANDADDR	1		/* timestamps and addresses */
+#define	IPOPT_TS_PRESPEC	3		/* specified modules only */
+
+#define IPV4_BEET_PHMAXLEN 8
+
+struct iphdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	ihl:4,
+		version:4;
+#elif defined (__BIG_ENDIAN_BITFIELD)
+	__u8	version:4,
+  		ihl:4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8	tos;
+	__be16	tot_len;
+	__be16	id;
+	__be16	frag_off;
+	__u8	ttl;
+	__u8	protocol;
+	__sum16	check;
+	__be32	saddr;
+	__be32	daddr;
+	/*The options start here. */
+};
+
+
+struct ip_auth_hdr {
+	__u8  nexthdr;
+	__u8  hdrlen;		/* This one is measured in 32 bit units! */
+	__be16 reserved;
+	__be32 spi;
+	__be32 seq_no;		/* Sequence number */
+	__u8  auth_data[0];	/* Variable len but >=4. Mind the 64 bit alignment! */
+};
+
+struct ip_esp_hdr {
+	__be32 spi;
+	__be32 seq_no;		/* Sequence number */
+	__u8  enc_data[0];	/* Variable len but >=8. Mind the 64 bit alignment! */
+};
+
+struct ip_comp_hdr {
+	__u8 nexthdr;
+	__u8 flags;
+	__be16 cpi;
+};
+
+struct ip_beet_phdr {
+	__u8 nexthdr;
+	__u8 hdrlen;
+	__u8 padlen;
+	__u8 reserved;
+};
+
+#endif /* _UAPI_LINUX_IP_H */
diff --git a/include/linux/ip6_tunnel.h b/include/uapi/linux/ip6_tunnel.h
similarity index 100%
rename from include/linux/ip6_tunnel.h
rename to include/uapi/linux/ip6_tunnel.h
diff --git a/include/linux/ip_vs.h b/include/uapi/linux/ip_vs.h
similarity index 100%
rename from include/linux/ip_vs.h
rename to include/uapi/linux/ip_vs.h
diff --git a/include/uapi/linux/ipc.h b/include/uapi/linux/ipc.h
new file mode 100644
index 0000000..de08dd4
--- /dev/null
+++ b/include/uapi/linux/ipc.h
@@ -0,0 +1,81 @@
+#ifndef _UAPI_LINUX_IPC_H
+#define _UAPI_LINUX_IPC_H
+
+#include <linux/types.h>
+
+#define IPC_PRIVATE ((__kernel_key_t) 0)  
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct ipc_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode; 
+	unsigned short	seq;
+};
+
+/* Include the definition of ipc64_perm */
+#include <asm/ipcbuf.h>
+
+/* resource get request flags */
+#define IPC_CREAT  00001000   /* create if key is nonexistent */
+#define IPC_EXCL   00002000   /* fail if key exists */
+#define IPC_NOWAIT 00004000   /* return error on wait */
+
+/* these fields are used by the DIPC package so the kernel as standard
+   should avoid using them if possible */
+   
+#define IPC_DIPC 00010000  /* make it distributed */
+#define IPC_OWN  00020000  /* this machine is the DIPC owner */
+
+/* 
+ * Control commands used with semctl, msgctl and shmctl 
+ * see also specific commands in sem.h, msg.h and shm.h
+ */
+#define IPC_RMID 0     /* remove resource */
+#define IPC_SET  1     /* set ipc_perm options */
+#define IPC_STAT 2     /* get ipc_perm options */
+#define IPC_INFO 3     /* see ipcs */
+
+/*
+ * Version flags for semctl, msgctl, and shmctl commands
+ * These are passed as bitflags or-ed with the actual command
+ */
+#define IPC_OLD 0	/* Old version (no 32-bit UID support on many
+			   architectures) */
+#define IPC_64  0x0100  /* New version (support 32-bit UIDs, bigger
+			   message sizes, etc. */
+
+/*
+ * These are used to wrap system calls.
+ *
+ * See architecture code for ugly details..
+ */
+struct ipc_kludge {
+	struct msgbuf __user *msgp;
+	long msgtyp;
+};
+
+#define SEMOP		 1
+#define SEMGET		 2
+#define SEMCTL		 3
+#define SEMTIMEDOP	 4
+#define MSGSND		11
+#define MSGRCV		12
+#define MSGGET		13
+#define MSGCTL		14
+#define SHMAT		21
+#define SHMDT		22
+#define SHMGET		23
+#define SHMCTL		24
+
+/* Used by the DIPC package, try and avoid reusing it */
+#define DIPC            25
+
+#define IPCCALL(version,op)	((version)<<16 | (op))
+
+
+#endif /* _UAPI_LINUX_IPC_H */
diff --git a/include/uapi/linux/ipmi.h b/include/uapi/linux/ipmi.h
new file mode 100644
index 0000000..33fbc99
--- /dev/null
+++ b/include/uapi/linux/ipmi.h
@@ -0,0 +1,456 @@
+/*
+ * ipmi.h
+ *
+ * MontaVista IPMI interface
+ *
+ * Author: MontaVista Software, Inc.
+ *         Corey Minyard <minyard@mvista.com>
+ *         source@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _UAPI__LINUX_IPMI_H
+#define _UAPI__LINUX_IPMI_H
+
+#include <linux/ipmi_msgdefs.h>
+#include <linux/compiler.h>
+
+/*
+ * This file describes an interface to an IPMI driver.  You have to
+ * have a fairly good understanding of IPMI to use this, so go read
+ * the specs first before actually trying to do anything.
+ *
+ * With that said, this driver provides a multi-user interface to the
+ * IPMI driver, and it allows multiple IPMI physical interfaces below
+ * the driver.  The physical interfaces bind as a lower layer on the
+ * driver.  They appear as interfaces to the application using this
+ * interface.
+ *
+ * Multi-user means that multiple applications may use the driver,
+ * send commands, receive responses, etc.  The driver keeps track of
+ * commands the user sends and tracks the responses.  The responses
+ * will go back to the application that send the command.  If the
+ * response doesn't come back in time, the driver will return a
+ * timeout error response to the application.  Asynchronous events
+ * from the BMC event queue will go to all users bound to the driver.
+ * The incoming event queue in the BMC will automatically be flushed
+ * if it becomes full and it is queried once a second to see if
+ * anything is in it.  Incoming commands to the driver will get
+ * delivered as commands.
+ *
+ * This driver provides two main interfaces: one for in-kernel
+ * applications and another for userland applications.  The
+ * capabilities are basically the same for both interface, although
+ * the interfaces are somewhat different.  The stuff in the
+ * #ifdef __KERNEL__ below is the in-kernel interface.  The userland
+ * interface is defined later in the file.  */
+
+
+
+/*
+ * This is an overlay for all the address types, so it's easy to
+ * determine the actual address type.  This is kind of like addresses
+ * work for sockets.
+ */
+#define IPMI_MAX_ADDR_SIZE 32
+struct ipmi_addr {
+	 /* Try to take these from the "Channel Medium Type" table
+	    in section 6.5 of the IPMI 1.5 manual. */
+	int   addr_type;
+	short channel;
+	char  data[IPMI_MAX_ADDR_SIZE];
+};
+
+/*
+ * When the address is not used, the type will be set to this value.
+ * The channel is the BMC's channel number for the channel (usually
+ * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
+ */
+#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE	0x0c
+struct ipmi_system_interface_addr {
+	int           addr_type;
+	short         channel;
+	unsigned char lun;
+};
+
+/* An IPMB Address. */
+#define IPMI_IPMB_ADDR_TYPE		0x01
+/* Used for broadcast get device id as described in section 17.9 of the
+   IPMI 1.5 manual. */
+#define IPMI_IPMB_BROADCAST_ADDR_TYPE	0x41
+struct ipmi_ipmb_addr {
+	int           addr_type;
+	short         channel;
+	unsigned char slave_addr;
+	unsigned char lun;
+};
+
+/*
+ * A LAN Address.  This is an address to/from a LAN interface bridged
+ * by the BMC, not an address actually out on the LAN.
+ *
+ * A conscious decision was made here to deviate slightly from the IPMI
+ * spec.  We do not use rqSWID and rsSWID like it shows in the
+ * message.  Instead, we use remote_SWID and local_SWID.  This means
+ * that any message (a request or response) from another device will
+ * always have exactly the same address.  If you didn't do this,
+ * requests and responses from the same device would have different
+ * addresses, and that's not too cool.
+ *
+ * In this address, the remote_SWID is always the SWID the remote
+ * message came from, or the SWID we are sending the message to.
+ * local_SWID is always our SWID.  Note that having our SWID in the
+ * message is a little weird, but this is required.
+ */
+#define IPMI_LAN_ADDR_TYPE		0x04
+struct ipmi_lan_addr {
+	int           addr_type;
+	short         channel;
+	unsigned char privilege;
+	unsigned char session_handle;
+	unsigned char remote_SWID;
+	unsigned char local_SWID;
+	unsigned char lun;
+};
+
+
+/*
+ * Channel for talking directly with the BMC.  When using this
+ * channel, This is for the system interface address type only.  FIXME
+ * - is this right, or should we use -1?
+ */
+#define IPMI_BMC_CHANNEL  0xf
+#define IPMI_NUM_CHANNELS 0x10
+
+/*
+ * Used to signify an "all channel" bitmask.  This is more than the
+ * actual number of channels because this is used in userland and
+ * will cover us if the number of channels is extended.
+ */
+#define IPMI_CHAN_ALL     (~0)
+
+
+/*
+ * A raw IPMI message without any addressing.  This covers both
+ * commands and responses.  The completion code is always the first
+ * byte of data in the response (as the spec shows the messages laid
+ * out).
+ */
+struct ipmi_msg {
+	unsigned char  netfn;
+	unsigned char  cmd;
+	unsigned short data_len;
+	unsigned char  __user *data;
+};
+
+struct kernel_ipmi_msg {
+	unsigned char  netfn;
+	unsigned char  cmd;
+	unsigned short data_len;
+	unsigned char  *data;
+};
+
+/*
+ * Various defines that are useful for IPMI applications.
+ */
+#define IPMI_INVALID_CMD_COMPLETION_CODE	0xC1
+#define IPMI_TIMEOUT_COMPLETION_CODE		0xC3
+#define IPMI_UNKNOWN_ERR_COMPLETION_CODE	0xff
+
+
+/*
+ * Receive types for messages coming from the receive interface.  This
+ * is used for the receive in-kernel interface and in the receive
+ * IOCTL.
+ *
+ * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
+ * it allows you to get the message results when you send a response
+ * message.
+ */
+#define IPMI_RESPONSE_RECV_TYPE		1 /* A response to a command */
+#define IPMI_ASYNC_EVENT_RECV_TYPE	2 /* Something from the event queue */
+#define IPMI_CMD_RECV_TYPE		3 /* A command from somewhere else */
+#define IPMI_RESPONSE_RESPONSE_TYPE	4 /* The response for
+					      a sent response, giving any
+					      error status for sending the
+					      response.  When you send a
+					      response message, this will
+					      be returned. */
+#define IPMI_OEM_RECV_TYPE		5 /* The response for OEM Channels */
+
+/* Note that async events and received commands do not have a completion
+   code as the first byte of the incoming data, unlike a response. */
+
+
+/*
+ * Modes for ipmi_set_maint_mode() and the userland IOCTL.  The AUTO
+ * setting is the default and means it will be set on certain
+ * commands.  Hard setting it on and off will override automatic
+ * operation.
+ */
+#define IPMI_MAINTENANCE_MODE_AUTO	0
+#define IPMI_MAINTENANCE_MODE_OFF	1
+#define IPMI_MAINTENANCE_MODE_ON	2
+
+
+
+/*
+ * The userland interface
+ */
+
+/*
+ * The userland interface for the IPMI driver is a standard character
+ * device, with each instance of an interface registered as a minor
+ * number under the major character device.
+ *
+ * The read and write calls do not work, to get messages in and out
+ * requires ioctl calls because of the complexity of the data.  select
+ * and poll do work, so you can wait for input using the file
+ * descriptor, you just can use read to get it.
+ *
+ * In general, you send a command down to the interface and receive
+ * responses back.  You can use the msgid value to correlate commands
+ * and responses, the driver will take care of figuring out which
+ * incoming messages are for which command and find the proper msgid
+ * value to report.  You will only receive reponses for commands you
+ * send.  Asynchronous events, however, go to all open users, so you
+ * must be ready to handle these (or ignore them if you don't care).
+ *
+ * The address type depends upon the channel type.  When talking
+ * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
+ * (IPMI_UNUSED_ADDR_TYPE).  When talking to an IPMB channel, you must
+ * supply a valid IPMB address with the addr_type set properly.
+ *
+ * When talking to normal channels, the driver takes care of the
+ * details of formatting and sending messages on that channel.  You do
+ * not, for instance, have to format a send command, you just send
+ * whatever command you want to the channel, the driver will create
+ * the send command, automatically issue receive command and get even
+ * commands, and pass those up to the proper user.
+ */
+
+
+/* The magic IOCTL value for this interface. */
+#define IPMI_IOC_MAGIC 'i'
+
+
+/* Messages sent to the interface are this format. */
+struct ipmi_req {
+	unsigned char __user *addr; /* Address to send the message to. */
+	unsigned int  addr_len;
+
+	long    msgid; /* The sequence number for the message.  This
+			  exact value will be reported back in the
+			  response to this request if it is a command.
+			  If it is a response, this will be used as
+			  the sequence value for the response.  */
+
+	struct ipmi_msg msg;
+};
+/*
+ * Send a message to the interfaces.  error values are:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EINVAL - The address supplied was not valid, or the command
+ *              was not allowed.
+ *   - EMSGSIZE - The message to was too large.
+ *   - ENOMEM - Buffers could not be allocated for the command.
+ */
+#define IPMICTL_SEND_COMMAND		_IOR(IPMI_IOC_MAGIC, 13,	\
+					     struct ipmi_req)
+
+/* Messages sent to the interface with timing parameters are this
+   format. */
+struct ipmi_req_settime {
+	struct ipmi_req req;
+
+	/* See ipmi_request_settime() above for details on these
+	   values. */
+	int          retries;
+	unsigned int retry_time_ms;
+};
+/*
+ * Send a message to the interfaces with timing parameters.  error values
+ * are:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EINVAL - The address supplied was not valid, or the command
+ *              was not allowed.
+ *   - EMSGSIZE - The message to was too large.
+ *   - ENOMEM - Buffers could not be allocated for the command.
+ */
+#define IPMICTL_SEND_COMMAND_SETTIME	_IOR(IPMI_IOC_MAGIC, 21,	\
+					     struct ipmi_req_settime)
+
+/* Messages received from the interface are this format. */
+struct ipmi_recv {
+	int     recv_type; /* Is this a command, response or an
+			      asyncronous event. */
+
+	unsigned char __user *addr;    /* Address the message was from is put
+				   here.  The caller must supply the
+				   memory. */
+	unsigned int  addr_len; /* The size of the address buffer.
+				   The caller supplies the full buffer
+				   length, this value is updated to
+				   the actual message length when the
+				   message is received. */
+
+	long    msgid; /* The sequence number specified in the request
+			  if this is a response.  If this is a command,
+			  this will be the sequence number from the
+			  command. */
+
+	struct ipmi_msg msg; /* The data field must point to a buffer.
+				The data_size field must be set to the
+				size of the message buffer.  The
+				caller supplies the full buffer
+				length, this value is updated to the
+				actual message length when the message
+				is received. */
+};
+
+/*
+ * Receive a message.  error values:
+ *  - EAGAIN - no messages in the queue.
+ *  - EFAULT - an address supplied was invalid.
+ *  - EINVAL - The address supplied was not valid.
+ *  - EMSGSIZE - The message to was too large to fit into the message buffer,
+ *               the message will be left in the buffer. */
+#define IPMICTL_RECEIVE_MSG		_IOWR(IPMI_IOC_MAGIC, 12,	\
+					      struct ipmi_recv)
+
+/*
+ * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
+ * will truncate the contents instead of leaving the data in the
+ * buffer.
+ */
+#define IPMICTL_RECEIVE_MSG_TRUNC	_IOWR(IPMI_IOC_MAGIC, 11,	\
+					      struct ipmi_recv)
+
+/* Register to get commands from other entities on this interface. */
+struct ipmi_cmdspec {
+	unsigned char netfn;
+	unsigned char cmd;
+};
+
+/*
+ * Register to receive a specific command.  error values:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EBUSY - The netfn/cmd supplied was already in use.
+ *   - ENOMEM - could not allocate memory for the entry.
+ */
+#define IPMICTL_REGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 14,	\
+					     struct ipmi_cmdspec)
+/*
+ * Unregister a regsitered command.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ *  - ENOENT - The netfn/cmd was not found registered for this user.
+ */
+#define IPMICTL_UNREGISTER_FOR_CMD	_IOR(IPMI_IOC_MAGIC, 15,	\
+					     struct ipmi_cmdspec)
+
+/*
+ * Register to get commands from other entities on specific channels.
+ * This way, you can only listen on specific channels, or have messages
+ * from some channels go to one place and other channels to someplace
+ * else.  The chans field is a bitmask, (1 << channel) for each channel.
+ * It may be IPMI_CHAN_ALL for all channels.
+ */
+struct ipmi_cmdspec_chans {
+	unsigned int netfn;
+	unsigned int cmd;
+	unsigned int chans;
+};
+
+/*
+ * Register to receive a specific command on specific channels.  error values:
+ *   - EFAULT - an address supplied was invalid.
+ *   - EBUSY - One of the netfn/cmd/chans supplied was already in use.
+ *   - ENOMEM - could not allocate memory for the entry.
+ */
+#define IPMICTL_REGISTER_FOR_CMD_CHANS	_IOR(IPMI_IOC_MAGIC, 28,	\
+					     struct ipmi_cmdspec_chans)
+/*
+ * Unregister some netfn/cmd/chans.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ *  - ENOENT - None of the netfn/cmd/chans were found registered for this user.
+ */
+#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29,	\
+					     struct ipmi_cmdspec_chans)
+
+/*
+ * Set whether this interface receives events.  Note that the first
+ * user registered for events will get all pending events for the
+ * interface.  error values:
+ *  - EFAULT - an address supplied was invalid.
+ */
+#define IPMICTL_SET_GETS_EVENTS_CMD	_IOR(IPMI_IOC_MAGIC, 16, int)
+
+/*
+ * Set and get the slave address and LUN that we will use for our
+ * source messages.  Note that this affects the interface, not just
+ * this user, so it will affect all users of this interface.  This is
+ * so some initialization code can come in and do the OEM-specific
+ * things it takes to determine your address (if not the BMC) and set
+ * it for everyone else.  You should probably leave the LUN alone.
+ */
+struct ipmi_channel_lun_address_set {
+	unsigned short channel;
+	unsigned char  value;
+};
+#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
+	_IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
+#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
+	_IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
+#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
+	_IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
+#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
+	_IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
+/* Legacy interfaces, these only set IPMB 0. */
+#define IPMICTL_SET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 17, unsigned int)
+#define IPMICTL_GET_MY_ADDRESS_CMD	_IOR(IPMI_IOC_MAGIC, 18, unsigned int)
+#define IPMICTL_SET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 19, unsigned int)
+#define IPMICTL_GET_MY_LUN_CMD		_IOR(IPMI_IOC_MAGIC, 20, unsigned int)
+
+/*
+ * Get/set the default timing values for an interface.  You shouldn't
+ * generally mess with these.
+ */
+struct ipmi_timing_parms {
+	int          retries;
+	unsigned int retry_time_ms;
+};
+#define IPMICTL_SET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 22, \
+					     struct ipmi_timing_parms)
+#define IPMICTL_GET_TIMING_PARMS_CMD	_IOR(IPMI_IOC_MAGIC, 23, \
+					     struct ipmi_timing_parms)
+
+/*
+ * Set the maintenance mode.  See ipmi_set_maintenance_mode() above
+ * for a description of what this does.
+ */
+#define IPMICTL_GET_MAINTENANCE_MODE_CMD	_IOR(IPMI_IOC_MAGIC, 30, int)
+#define IPMICTL_SET_MAINTENANCE_MODE_CMD	_IOW(IPMI_IOC_MAGIC, 31, int)
+
+#endif /* _UAPI__LINUX_IPMI_H */
diff --git a/include/linux/ipmi_msgdefs.h b/include/uapi/linux/ipmi_msgdefs.h
similarity index 100%
rename from include/linux/ipmi_msgdefs.h
rename to include/uapi/linux/ipmi_msgdefs.h
diff --git a/include/linux/ipsec.h b/include/uapi/linux/ipsec.h
similarity index 100%
rename from include/linux/ipsec.h
rename to include/uapi/linux/ipsec.h
diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h
new file mode 100644
index 0000000..a6d7d1c
--- /dev/null
+++ b/include/uapi/linux/ipv6.h
@@ -0,0 +1,164 @@
+#ifndef _UAPI_IPV6_H
+#define _UAPI_IPV6_H
+
+#include <linux/types.h>
+#include <linux/in6.h>
+#include <asm/byteorder.h>
+
+/* The latest drafts declared increase in minimal mtu up to 1280. */
+
+#define IPV6_MIN_MTU	1280
+
+/*
+ *	Advanced API
+ *	source interface/address selection, source routing, etc...
+ *	*under construction*
+ */
+
+
+struct in6_pktinfo {
+	struct in6_addr	ipi6_addr;
+	int		ipi6_ifindex;
+};
+
+struct ip6_mtuinfo {
+	struct sockaddr_in6	ip6m_addr;
+	__u32			ip6m_mtu;
+};
+
+struct in6_ifreq {
+	struct in6_addr	ifr6_addr;
+	__u32		ifr6_prefixlen;
+	int		ifr6_ifindex; 
+};
+
+#define IPV6_SRCRT_STRICT	0x01	/* Deprecated; will be removed */
+#define IPV6_SRCRT_TYPE_0	0	/* Deprecated; will be removed */
+#define IPV6_SRCRT_TYPE_2	2	/* IPv6 type 2 Routing Header	*/
+
+/*
+ *	routing header
+ */
+struct ipv6_rt_hdr {
+	__u8		nexthdr;
+	__u8		hdrlen;
+	__u8		type;
+	__u8		segments_left;
+
+	/*
+	 *	type specific data
+	 *	variable length field
+	 */
+};
+
+
+struct ipv6_opt_hdr {
+	__u8 		nexthdr;
+	__u8 		hdrlen;
+	/* 
+	 * TLV encoded option data follows.
+	 */
+} __attribute__((packed));	/* required for some archs */
+
+#define ipv6_destopt_hdr ipv6_opt_hdr
+#define ipv6_hopopt_hdr  ipv6_opt_hdr
+
+
+/*
+ *	routing header type 0 (used in cmsghdr struct)
+ */
+
+struct rt0_hdr {
+	struct ipv6_rt_hdr	rt_hdr;
+	__u32			reserved;
+	struct in6_addr		addr[0];
+
+#define rt0_type		rt_hdr.type
+};
+
+/*
+ *	routing header type 2
+ */
+
+struct rt2_hdr {
+	struct ipv6_rt_hdr	rt_hdr;
+	__u32			reserved;
+	struct in6_addr		addr;
+
+#define rt2_type		rt_hdr.type
+};
+
+/*
+ *	home address option in destination options header
+ */
+
+struct ipv6_destopt_hao {
+	__u8			type;
+	__u8			length;
+	struct in6_addr		addr;
+} __attribute__((packed));
+
+/*
+ *	IPv6 fixed header
+ *
+ *	BEWARE, it is incorrect. The first 4 bits of flow_lbl
+ *	are glued to priority now, forming "class".
+ */
+
+struct ipv6hdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8			priority:4,
+				version:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8			version:4,
+				priority:4;
+#else
+#error	"Please fix <asm/byteorder.h>"
+#endif
+	__u8			flow_lbl[3];
+
+	__be16			payload_len;
+	__u8			nexthdr;
+	__u8			hop_limit;
+
+	struct	in6_addr	saddr;
+	struct	in6_addr	daddr;
+};
+
+
+/* index values for the variables in ipv6_devconf */
+enum {
+	DEVCONF_FORWARDING = 0,
+	DEVCONF_HOPLIMIT,
+	DEVCONF_MTU6,
+	DEVCONF_ACCEPT_RA,
+	DEVCONF_ACCEPT_REDIRECTS,
+	DEVCONF_AUTOCONF,
+	DEVCONF_DAD_TRANSMITS,
+	DEVCONF_RTR_SOLICITS,
+	DEVCONF_RTR_SOLICIT_INTERVAL,
+	DEVCONF_RTR_SOLICIT_DELAY,
+	DEVCONF_USE_TEMPADDR,
+	DEVCONF_TEMP_VALID_LFT,
+	DEVCONF_TEMP_PREFERED_LFT,
+	DEVCONF_REGEN_MAX_RETRY,
+	DEVCONF_MAX_DESYNC_FACTOR,
+	DEVCONF_MAX_ADDRESSES,
+	DEVCONF_FORCE_MLD_VERSION,
+	DEVCONF_ACCEPT_RA_DEFRTR,
+	DEVCONF_ACCEPT_RA_PINFO,
+	DEVCONF_ACCEPT_RA_RTR_PREF,
+	DEVCONF_RTR_PROBE_INTERVAL,
+	DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN,
+	DEVCONF_PROXY_NDP,
+	DEVCONF_OPTIMISTIC_DAD,
+	DEVCONF_ACCEPT_SOURCE_ROUTE,
+	DEVCONF_MC_FORWARDING,
+	DEVCONF_DISABLE_IPV6,
+	DEVCONF_ACCEPT_DAD,
+	DEVCONF_FORCE_TLLAO,
+	DEVCONF_MAX
+};
+
+
+#endif /* _UAPI_IPV6_H */
diff --git a/include/uapi/linux/ipv6_route.h b/include/uapi/linux/ipv6_route.h
new file mode 100644
index 0000000..0459664
--- /dev/null
+++ b/include/uapi/linux/ipv6_route.h
@@ -0,0 +1,58 @@
+/*
+ *	Linux INET6 implementation 
+ *
+ *	Authors:
+ *	Pedro Roque		<roque@di.fc.ul.pt>	
+ *
+ *	This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_IPV6_ROUTE_H
+#define _UAPI_LINUX_IPV6_ROUTE_H
+
+#include <linux/types.h>
+
+#define RTF_DEFAULT	0x00010000	/* default - learned via ND	*/
+#define RTF_ALLONLINK	0x00020000	/* (deprecated and will be removed)
+					   fallback, no routers on link */
+#define RTF_ADDRCONF	0x00040000	/* addrconf route - RA		*/
+#define RTF_PREFIX_RT	0x00080000	/* A prefix only route - RA	*/
+#define RTF_ANYCAST	0x00100000	/* Anycast			*/
+
+#define RTF_NONEXTHOP	0x00200000	/* route with no nexthop	*/
+#define RTF_EXPIRES	0x00400000
+
+#define RTF_ROUTEINFO	0x00800000	/* route information - RA	*/
+
+#define RTF_CACHE	0x01000000	/* cache entry			*/
+#define RTF_FLOW	0x02000000	/* flow significant route	*/
+#define RTF_POLICY	0x04000000	/* policy route			*/
+
+#define RTF_PREF(pref)	((pref) << 27)
+#define RTF_PREF_MASK	0x18000000
+
+#define RTF_LOCAL	0x80000000
+
+
+struct in6_rtmsg {
+	struct in6_addr		rtmsg_dst;
+	struct in6_addr		rtmsg_src;
+	struct in6_addr		rtmsg_gateway;
+	__u32			rtmsg_type;
+	__u16			rtmsg_dst_len;
+	__u16			rtmsg_src_len;
+	__u32			rtmsg_metric;
+	unsigned long		rtmsg_info;
+        __u32			rtmsg_flags;
+	int			rtmsg_ifindex;
+};
+
+#define RTMSG_NEWDEVICE		0x11
+#define RTMSG_DELDEVICE		0x12
+#define RTMSG_NEWROUTE		0x21
+#define RTMSG_DELROUTE		0x22
+
+#endif /* _UAPI_LINUX_IPV6_ROUTE_H */
diff --git a/include/linux/ipx.h b/include/uapi/linux/ipx.h
similarity index 100%
rename from include/linux/ipx.h
rename to include/uapi/linux/ipx.h
diff --git a/include/linux/irda.h b/include/uapi/linux/irda.h
similarity index 100%
rename from include/linux/irda.h
rename to include/uapi/linux/irda.h
diff --git a/include/uapi/linux/irqnr.h b/include/uapi/linux/irqnr.h
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/include/uapi/linux/irqnr.h
diff --git a/include/uapi/linux/isdn.h b/include/uapi/linux/isdn.h
new file mode 100644
index 0000000..eb1995f
--- /dev/null
+++ b/include/uapi/linux/isdn.h
@@ -0,0 +1,143 @@
+/* $Id: isdn.h,v 1.125.2.3 2004/02/10 01:07:14 keil Exp $
+ *
+ * Main header for the Linux ISDN subsystem (linklevel).
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    by Thinking Objects Software GmbH Wuerzburg
+ * Copyright 1995,96    by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI__ISDN_H__
+#define _UAPI__ISDN_H__
+
+#include <linux/ioctl.h>
+#include <linux/tty.h>
+
+#define ISDN_MAX_DRIVERS    32
+#define ISDN_MAX_CHANNELS   64
+
+/* New ioctl-codes */
+#define IIOCNETAIF  _IO('I',1)
+#define IIOCNETDIF  _IO('I',2)
+#define IIOCNETSCF  _IO('I',3)
+#define IIOCNETGCF  _IO('I',4)
+#define IIOCNETANM  _IO('I',5)
+#define IIOCNETDNM  _IO('I',6)
+#define IIOCNETGNM  _IO('I',7)
+#define IIOCGETSET  _IO('I',8) /* no longer supported */
+#define IIOCSETSET  _IO('I',9) /* no longer supported */
+#define IIOCSETVER  _IO('I',10)
+#define IIOCNETHUP  _IO('I',11)
+#define IIOCSETGST  _IO('I',12)
+#define IIOCSETBRJ  _IO('I',13)
+#define IIOCSIGPRF  _IO('I',14)
+#define IIOCGETPRF  _IO('I',15)
+#define IIOCSETPRF  _IO('I',16)
+#define IIOCGETMAP  _IO('I',17)
+#define IIOCSETMAP  _IO('I',18)
+#define IIOCNETASL  _IO('I',19)
+#define IIOCNETDIL  _IO('I',20)
+#define IIOCGETCPS  _IO('I',21)
+#define IIOCGETDVR  _IO('I',22)
+#define IIOCNETLCR  _IO('I',23) /* dwabc ioctl for LCR from isdnlog */
+#define IIOCNETDWRSET  _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */
+
+#define IIOCNETALN  _IO('I',32)
+#define IIOCNETDLN  _IO('I',33)
+
+#define IIOCNETGPN  _IO('I',34)
+
+#define IIOCDBGVAR  _IO('I',127)
+
+#define IIOCDRVCTL  _IO('I',128)
+
+/* cisco hdlck device private ioctls */
+#define SIOCGKEEPPERIOD	(SIOCDEVPRIVATE + 0)
+#define SIOCSKEEPPERIOD	(SIOCDEVPRIVATE + 1)
+#define SIOCGDEBSERINT	(SIOCDEVPRIVATE + 2)
+#define SIOCSDEBSERINT	(SIOCDEVPRIVATE + 3)
+
+/* Packet encapsulations for net-interfaces */
+#define ISDN_NET_ENCAP_ETHER      0
+#define ISDN_NET_ENCAP_RAWIP      1
+#define ISDN_NET_ENCAP_IPTYP      2
+#define ISDN_NET_ENCAP_CISCOHDLC  3 /* Without SLARP and keepalive */
+#define ISDN_NET_ENCAP_SYNCPPP    4
+#define ISDN_NET_ENCAP_UIHDLC     5
+#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive    */
+#define ISDN_NET_ENCAP_X25IFACE   7 /* Documentation/networking/x25-iface.txt */
+#define ISDN_NET_ENCAP_MAX_ENCAP  ISDN_NET_ENCAP_X25IFACE
+
+/* Facility which currently uses an ISDN-channel */
+#define ISDN_USAGE_NONE       0
+#define ISDN_USAGE_RAW        1
+#define ISDN_USAGE_MODEM      2
+#define ISDN_USAGE_NET        3
+#define ISDN_USAGE_VOICE      4
+#define ISDN_USAGE_FAX        5
+#define ISDN_USAGE_MASK       7 /* Mask to get plain usage */
+#define ISDN_USAGE_DISABLED  32 /* This bit is set, if channel is disabled */
+#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */
+#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing  */
+
+#define ISDN_MODEM_NUMREG    24        /* Number of Modem-Registers        */
+#define ISDN_LMSNLEN         255 /* Length of tty's Listen-MSN string */
+#define ISDN_CMSGLEN	     50	 /* Length of CONNECT-Message to add for Modem */
+
+#define ISDN_MSNLEN          32
+#define NET_DV 0x06  /* Data version for isdn_net_ioctl_cfg   */
+#define TTY_DV 0x06  /* Data version for iprofd etc.          */
+
+#define INF_DV 0x01  /* Data version for /dev/isdninfo        */
+
+typedef struct {
+  char drvid[25];
+  unsigned long arg;
+} isdn_ioctl_struct;
+
+typedef struct {
+  char name[10];
+  char phone[ISDN_MSNLEN];
+  int  outgoing;
+} isdn_net_ioctl_phone;
+
+typedef struct {
+  char name[10];     /* Name of interface                     */
+  char master[10];   /* Name of Master for Bundling           */
+  char slave[10];    /* Name of Slave for Bundling            */
+  char eaz[256];     /* EAZ/MSN                               */
+  char drvid[25];    /* DriverId for Bindings                 */
+  int  onhtime;      /* Hangup-Timeout                        */
+  int  charge;       /* Charge-Units                          */
+  int  l2_proto;     /* Layer-2 protocol                      */
+  int  l3_proto;     /* Layer-3 protocol                      */
+  int  p_encap;      /* Encapsulation                         */
+  int  exclusive;    /* Channel, if bound exclusive           */
+  int  dialmax;      /* Dial Retry-Counter                    */
+  int  slavedelay;   /* Delay until slave starts up           */
+  int  cbdelay;      /* Delay before Callback                 */
+  int  chargehup;    /* Flag: Charge-Hangup                   */
+  int  ihup;         /* Flag: Hangup-Timeout on incoming line */
+  int  secure;       /* Flag: Secure                          */
+  int  callback;     /* Flag: Callback                        */
+  int  cbhup;        /* Flag: Reject Call before Callback     */
+  int  pppbind;      /* ippp device for bindings              */
+  int  chargeint;    /* Use fixed charge interval length      */
+  int  triggercps;   /* BogoCPS needed for triggering slave   */
+  int  dialtimeout;  /* Dial-Timeout                          */
+  int  dialwait;     /* Time to wait after failed dial        */
+  int  dialmode;     /* Flag: off / on / auto                 */
+} isdn_net_ioctl_cfg;
+
+#define ISDN_NET_DIALMODE_MASK  0xC0    /* bits for status                */
+#define ISDN_NET_DM_OFF	        0x00    /* this interface is stopped      */
+#define ISDN_NET_DM_MANUAL	0x40    /* this interface is on (manual)  */
+#define ISDN_NET_DM_AUTO	0x80    /* this interface is autodial     */
+#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK)
+
+
+#endif /* _UAPI__ISDN_H__ */
diff --git a/include/uapi/linux/isdn_divertif.h b/include/uapi/linux/isdn_divertif.h
new file mode 100644
index 0000000..3e3c2d8
--- /dev/null
+++ b/include/uapi/linux/isdn_divertif.h
@@ -0,0 +1,30 @@
+/* $Id: isdn_divertif.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $
+ *
+ * Header for the diversion supplementary interface for i4l.
+ *
+ * Author    Werner Cornelius (werner@titro.de)
+ * Copyright by Werner Cornelius (werner@titro.de)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI_LINUX_ISDN_DIVERTIF_H
+#define _UAPI_LINUX_ISDN_DIVERTIF_H
+
+/***********************************************************/
+/* magic value is also used to control version information */
+/***********************************************************/
+#define DIVERT_IF_MAGIC 0x25873401
+#define DIVERT_CMD_REG  0x00  /* register command */
+#define DIVERT_CMD_REL  0x01  /* release command */
+#define DIVERT_NO_ERR   0x00  /* return value no error */
+#define DIVERT_CMD_ERR  0x01  /* invalid cmd */
+#define DIVERT_VER_ERR  0x02  /* magic/version invalid */
+#define DIVERT_REG_ERR  0x03  /* module already registered */
+#define DIVERT_REL_ERR  0x04  /* module not registered */
+#define DIVERT_REG_NAME isdn_register_divert
+
+
+#endif /* _UAPI_LINUX_ISDN_DIVERTIF_H */
diff --git a/include/uapi/linux/isdn_ppp.h b/include/uapi/linux/isdn_ppp.h
new file mode 100644
index 0000000..e7d7bd2
--- /dev/null
+++ b/include/uapi/linux/isdn_ppp.h
@@ -0,0 +1,67 @@
+/* Linux ISDN subsystem, sync PPP, interface to ipppd
+ *
+ * Copyright 1994-1999  by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
+ * Copyright 1995,96    by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de)
+ * Copyright 2000-2002  by Kai Germaschewski (kai@germaschewski.name)
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI_LINUX_ISDN_PPP_H
+#define _UAPI_LINUX_ISDN_PPP_H
+
+#define CALLTYPE_INCOMING 0x1
+#define CALLTYPE_OUTGOING 0x2
+#define CALLTYPE_CALLBACK 0x4
+
+#define IPPP_VERSION    "2.2.0"
+
+struct pppcallinfo
+{
+  int calltype;
+  unsigned char local_num[64];
+  unsigned char remote_num[64];
+  int charge_units;
+};
+
+#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo)
+#define PPPIOCBUNDLE   _IOW('t',129,int)
+#define PPPIOCGMPFLAGS _IOR('t',130,int)
+#define PPPIOCSMPFLAGS _IOW('t',131,int)
+#define PPPIOCSMPMTU   _IOW('t',132,int)
+#define PPPIOCSMPMRU   _IOW('t',133,int)
+#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8])
+#define PPPIOCSCOMPRESSOR _IOW('t',135,int)
+#define PPPIOCGIFNAME      _IOR('t',136, char [IFNAMSIZ] )
+
+
+#define SC_MP_PROT       0x00000200
+#define SC_REJ_MP_PROT   0x00000400
+#define SC_OUT_SHORT_SEQ 0x00000800
+#define SC_IN_SHORT_SEQ  0x00004000
+
+#define SC_DECOMP_ON		0x01
+#define SC_COMP_ON		0x02
+#define SC_DECOMP_DISCARD	0x04
+#define SC_COMP_DISCARD		0x08
+#define SC_LINK_DECOMP_ON	0x10
+#define SC_LINK_COMP_ON		0x20
+#define SC_LINK_DECOMP_DISCARD	0x40
+#define SC_LINK_COMP_DISCARD	0x80
+
+#define ISDN_PPP_COMP_MAX_OPTIONS 16
+
+#define IPPP_COMP_FLAG_XMIT 0x1
+#define IPPP_COMP_FLAG_LINK 0x2
+
+struct isdn_ppp_comp_data {
+  int num;
+  unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS];
+  int optlen;
+  int flags;
+};
+
+#endif /* _UAPI_LINUX_ISDN_PPP_H */
diff --git a/include/uapi/linux/isdnif.h b/include/uapi/linux/isdnif.h
new file mode 100644
index 0000000..246138c
--- /dev/null
+++ b/include/uapi/linux/isdnif.h
@@ -0,0 +1,56 @@
+/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $
+ *
+ * Linux ISDN subsystem
+ * Definition of the interface between the subsystem and its low-level drivers.
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96    Thinking Objects Software GmbH Wuerzburg
+ * 
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef _UAPI__ISDNIF_H__
+#define _UAPI__ISDNIF_H__
+
+
+/*
+ * Values for general protocol-selection
+ */
+#define ISDN_PTYPE_UNKNOWN   0   /* Protocol undefined   */
+#define ISDN_PTYPE_1TR6      1   /* german 1TR6-protocol */
+#define ISDN_PTYPE_EURO      2   /* EDSS1-protocol       */
+#define ISDN_PTYPE_LEASED    3   /* for leased lines     */
+#define ISDN_PTYPE_NI1       4   /* US NI-1 protocol     */
+#define ISDN_PTYPE_MAX       7   /* Max. 8 Protocols     */
+
+/*
+ * Values for Layer-2-protocol-selection
+ */
+#define ISDN_PROTO_L2_X75I   0   /* X75/LAPB with I-Frames            */
+#define ISDN_PROTO_L2_X75UI  1   /* X75/LAPB with UI-Frames           */
+#define ISDN_PROTO_L2_X75BUI 2   /* X75/LAPB with UI-Frames           */
+#define ISDN_PROTO_L2_HDLC   3   /* HDLC                              */
+#define ISDN_PROTO_L2_TRANS  4   /* Transparent (Voice)               */
+#define ISDN_PROTO_L2_X25DTE 5   /* X25/LAPB DTE mode                 */
+#define ISDN_PROTO_L2_X25DCE 6   /* X25/LAPB DCE mode                 */
+#define ISDN_PROTO_L2_V11096 7   /* V.110 bitrate adaption 9600 Baud  */
+#define ISDN_PROTO_L2_V11019 8   /* V.110 bitrate adaption 19200 Baud */
+#define ISDN_PROTO_L2_V11038 9   /* V.110 bitrate adaption 38400 Baud */
+#define ISDN_PROTO_L2_MODEM  10  /* Analog Modem on Board */
+#define ISDN_PROTO_L2_FAX    11  /* Fax Group 2/3         */
+#define ISDN_PROTO_L2_HDLC_56K 12   /* HDLC 56k                          */
+#define ISDN_PROTO_L2_MAX    15  /* Max. 16 Protocols                 */
+
+/*
+ * Values for Layer-3-protocol-selection
+ */
+#define ISDN_PROTO_L3_TRANS	0	/* Transparent */
+#define ISDN_PROTO_L3_TRANSDSP	1	/* Transparent with DSP */
+#define ISDN_PROTO_L3_FCLASS2	2	/* Fax Group 2/3 CLASS 2 */
+#define ISDN_PROTO_L3_FCLASS1	3	/* Fax Group 2/3 CLASS 1 */
+#define ISDN_PROTO_L3_MAX	7	/* Max. 8 Protocols */
+
+
+#endif /* _UAPI__ISDNIF_H__ */
diff --git a/include/linux/iso_fs.h b/include/uapi/linux/iso_fs.h
similarity index 100%
rename from include/linux/iso_fs.h
rename to include/uapi/linux/iso_fs.h
diff --git a/include/linux/ivtv.h b/include/uapi/linux/ivtv.h
similarity index 100%
rename from include/linux/ivtv.h
rename to include/uapi/linux/ivtv.h
diff --git a/include/linux/ivtvfb.h b/include/uapi/linux/ivtvfb.h
similarity index 100%
rename from include/linux/ivtvfb.h
rename to include/uapi/linux/ivtvfb.h
diff --git a/include/linux/ixjuser.h b/include/uapi/linux/ixjuser.h
similarity index 100%
rename from include/linux/ixjuser.h
rename to include/uapi/linux/ixjuser.h
diff --git a/include/linux/jffs2.h b/include/uapi/linux/jffs2.h
similarity index 100%
rename from include/linux/jffs2.h
rename to include/uapi/linux/jffs2.h
diff --git a/include/uapi/linux/joystick.h b/include/uapi/linux/joystick.h
new file mode 100644
index 0000000..b856fd1
--- /dev/null
+++ b/include/uapi/linux/joystick.h
@@ -0,0 +1,136 @@
+/*
+ *  Copyright (C) 1996-2000 Vojtech Pavlik
+ *
+ *  Sponsored by SuSE
+ */
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or 
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * 
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
+ */
+#ifndef _UAPI_LINUX_JOYSTICK_H
+#define _UAPI_LINUX_JOYSTICK_H
+
+
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+/*
+ * Version
+ */
+
+#define JS_VERSION		0x020100
+
+/*
+ * Types and constants for reading from /dev/js
+ */
+
+#define JS_EVENT_BUTTON		0x01	/* button pressed/released */
+#define JS_EVENT_AXIS		0x02	/* joystick moved */
+#define JS_EVENT_INIT		0x80	/* initial state of device */
+
+struct js_event {
+	__u32 time;	/* event timestamp in milliseconds */
+	__s16 value;	/* value */
+	__u8 type;	/* event type */
+	__u8 number;	/* axis/button number */
+};
+
+/*
+ * IOCTL commands for joystick driver
+ */
+
+#define JSIOCGVERSION		_IOR('j', 0x01, __u32)				/* get driver version */
+
+#define JSIOCGAXES		_IOR('j', 0x11, __u8)				/* get number of axes */
+#define JSIOCGBUTTONS		_IOR('j', 0x12, __u8)				/* get number of buttons */
+#define JSIOCGNAME(len)		_IOC(_IOC_READ, 'j', 0x13, len)			/* get identifier string */
+
+#define JSIOCSCORR		_IOW('j', 0x21, struct js_corr)			/* set correction values */
+#define JSIOCGCORR		_IOR('j', 0x22, struct js_corr)			/* get correction values */
+
+#define JSIOCSAXMAP		_IOW('j', 0x31, __u8[ABS_CNT])			/* set axis mapping */
+#define JSIOCGAXMAP		_IOR('j', 0x32, __u8[ABS_CNT])			/* get axis mapping */
+#define JSIOCSBTNMAP		_IOW('j', 0x33, __u16[KEY_MAX - BTN_MISC + 1])	/* set button mapping */
+#define JSIOCGBTNMAP		_IOR('j', 0x34, __u16[KEY_MAX - BTN_MISC + 1])	/* get button mapping */
+
+/*
+ * Types and constants for get/set correction
+ */
+
+#define JS_CORR_NONE		0x00	/* returns raw values */
+#define JS_CORR_BROKEN		0x01	/* broken line */
+
+struct js_corr {
+	__s32 coef[8];
+	__s16 prec;
+	__u16 type;
+};
+
+/*
+ * v0.x compatibility definitions
+ */
+
+#define JS_RETURN		sizeof(struct JS_DATA_TYPE)
+#define JS_TRUE			1
+#define JS_FALSE		0
+#define JS_X_0			0x01
+#define JS_Y_0			0x02
+#define JS_X_1			0x04
+#define JS_Y_1			0x08
+#define JS_MAX			2
+
+#define JS_DEF_TIMEOUT		0x1300
+#define JS_DEF_CORR		0
+#define JS_DEF_TIMELIMIT	10L
+
+#define JS_SET_CAL		1
+#define JS_GET_CAL		2
+#define JS_SET_TIMEOUT		3
+#define JS_GET_TIMEOUT		4
+#define JS_SET_TIMELIMIT	5
+#define JS_GET_TIMELIMIT	6
+#define JS_GET_ALL		7
+#define JS_SET_ALL		8
+
+struct JS_DATA_TYPE {
+	__s32 buttons;
+	__s32 x;
+	__s32 y;
+};
+
+struct JS_DATA_SAVE_TYPE_32 {
+	__s32 JS_TIMEOUT;
+	__s32 BUSY;
+	__s32 JS_EXPIRETIME;
+	__s32 JS_TIMELIMIT;
+	struct JS_DATA_TYPE JS_SAVE;
+	struct JS_DATA_TYPE JS_CORR;
+};
+
+struct JS_DATA_SAVE_TYPE_64 {
+	__s32 JS_TIMEOUT;
+	__s32 BUSY;
+	__s64 JS_EXPIRETIME;
+	__s64 JS_TIMELIMIT;
+	struct JS_DATA_TYPE JS_SAVE;
+	struct JS_DATA_TYPE JS_CORR;
+};
+
+
+#endif /* _UAPI_LINUX_JOYSTICK_H */
diff --git a/include/uapi/linux/kd.h b/include/uapi/linux/kd.h
new file mode 100644
index 0000000..87b7cc4
--- /dev/null
+++ b/include/uapi/linux/kd.h
@@ -0,0 +1,183 @@
+#ifndef _UAPI_LINUX_KD_H
+#define _UAPI_LINUX_KD_H
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+/* 0x4B is 'K', to avoid collision with termios and vt */
+
+#define GIO_FONT	0x4B60	/* gets font in expanded form */
+#define PIO_FONT	0x4B61	/* use font in expanded form */
+
+#define GIO_FONTX	0x4B6B	/* get font using struct consolefontdesc */
+#define PIO_FONTX	0x4B6C	/* set font using struct consolefontdesc */
+struct consolefontdesc {
+	unsigned short charcount;	/* characters in font (256 or 512) */
+	unsigned short charheight;	/* scan lines per character (1-32) */
+	char __user *chardata;		/* font data in expanded form */
+};
+
+#define PIO_FONTRESET   0x4B6D	/* reset to default font */
+
+#define GIO_CMAP	0x4B70	/* gets colour palette on VGA+ */
+#define PIO_CMAP	0x4B71	/* sets colour palette on VGA+ */
+
+#define KIOCSOUND	0x4B2F	/* start sound generation (0 for off) */
+#define KDMKTONE	0x4B30	/* generate tone */
+
+#define KDGETLED	0x4B31	/* return current led state */
+#define KDSETLED	0x4B32	/* set led state [lights, not flags] */
+#define 	LED_SCR		0x01	/* scroll lock led */
+#define 	LED_NUM		0x02	/* num lock led */
+#define 	LED_CAP		0x04	/* caps lock led */
+
+#define KDGKBTYPE	0x4B33	/* get keyboard type */
+#define 	KB_84		0x01
+#define 	KB_101		0x02 	/* this is what we always answer */
+#define 	KB_OTHER	0x03
+
+#define KDADDIO		0x4B34	/* add i/o port as valid */
+#define KDDELIO		0x4B35	/* del i/o port as valid */
+#define KDENABIO	0x4B36	/* enable i/o to video board */
+#define KDDISABIO	0x4B37	/* disable i/o to video board */
+
+#define KDSETMODE	0x4B3A	/* set text/graphics mode */
+#define		KD_TEXT		0x00
+#define		KD_GRAPHICS	0x01
+#define		KD_TEXT0	0x02	/* obsolete */
+#define		KD_TEXT1	0x03	/* obsolete */
+#define KDGETMODE	0x4B3B	/* get current mode */
+
+#define KDMAPDISP	0x4B3C	/* map display into address space */
+#define KDUNMAPDISP	0x4B3D	/* unmap display from address space */
+
+typedef char scrnmap_t;
+#define		E_TABSZ		256
+#define GIO_SCRNMAP	0x4B40	/* get screen mapping from kernel */
+#define PIO_SCRNMAP	0x4B41	/* put screen mapping table in kernel */
+#define GIO_UNISCRNMAP  0x4B69	/* get full Unicode screen mapping */
+#define PIO_UNISCRNMAP  0x4B6A  /* set full Unicode screen mapping */
+
+#define GIO_UNIMAP	0x4B66	/* get unicode-to-font mapping from kernel */
+struct unipair {
+	unsigned short unicode;
+	unsigned short fontpos;
+};
+struct unimapdesc {
+	unsigned short entry_ct;
+	struct unipair __user *entries;
+};
+#define PIO_UNIMAP	0x4B67	/* put unicode-to-font mapping in kernel */
+#define PIO_UNIMAPCLR	0x4B68	/* clear table, possibly advise hash algorithm */
+struct unimapinit {
+	unsigned short advised_hashsize;  /* 0 if no opinion */
+	unsigned short advised_hashstep;  /* 0 if no opinion */
+	unsigned short advised_hashlevel; /* 0 if no opinion */
+};
+
+#define UNI_DIRECT_BASE 0xF000	/* start of Direct Font Region */
+#define UNI_DIRECT_MASK 0x01FF	/* Direct Font Region bitmask */
+
+#define		K_RAW		0x00
+#define		K_XLATE		0x01
+#define		K_MEDIUMRAW	0x02
+#define		K_UNICODE	0x03
+#define		K_OFF		0x04
+#define KDGKBMODE	0x4B44	/* gets current keyboard mode */
+#define KDSKBMODE	0x4B45	/* sets current keyboard mode */
+
+#define		K_METABIT	0x03
+#define		K_ESCPREFIX	0x04
+#define KDGKBMETA	0x4B62	/* gets meta key handling mode */
+#define KDSKBMETA	0x4B63	/* sets meta key handling mode */
+
+#define		K_SCROLLLOCK	0x01
+#define		K_NUMLOCK	0x02
+#define		K_CAPSLOCK	0x04
+#define	KDGKBLED	0x4B64	/* get led flags (not lights) */
+#define	KDSKBLED	0x4B65	/* set led flags (not lights) */
+
+struct kbentry {
+	unsigned char kb_table;
+	unsigned char kb_index;
+	unsigned short kb_value;
+};
+#define		K_NORMTAB	0x00
+#define		K_SHIFTTAB	0x01
+#define		K_ALTTAB	0x02
+#define		K_ALTSHIFTTAB	0x03
+
+#define KDGKBENT	0x4B46	/* gets one entry in translation table */
+#define KDSKBENT	0x4B47	/* sets one entry in translation table */
+
+struct kbsentry {
+	unsigned char kb_func;
+	unsigned char kb_string[512];
+};
+#define KDGKBSENT	0x4B48	/* gets one function key string entry */
+#define KDSKBSENT	0x4B49	/* sets one function key string entry */
+
+struct kbdiacr {
+        unsigned char diacr, base, result;
+};
+struct kbdiacrs {
+        unsigned int kb_cnt;    /* number of entries in following array */
+	struct kbdiacr kbdiacr[256];    /* MAX_DIACR from keyboard.h */
+};
+#define KDGKBDIACR      0x4B4A  /* read kernel accent table */
+#define KDSKBDIACR      0x4B4B  /* write kernel accent table */
+
+struct kbdiacruc {
+	unsigned int diacr, base, result;
+};
+struct kbdiacrsuc {
+        unsigned int kb_cnt;    /* number of entries in following array */
+	struct kbdiacruc kbdiacruc[256];    /* MAX_DIACR from keyboard.h */
+};
+#define KDGKBDIACRUC    0x4BFA  /* read kernel accent table - UCS */
+#define KDSKBDIACRUC    0x4BFB  /* write kernel accent table - UCS */
+
+struct kbkeycode {
+	unsigned int scancode, keycode;
+};
+#define KDGETKEYCODE	0x4B4C	/* read kernel keycode table entry */
+#define KDSETKEYCODE	0x4B4D	/* write kernel keycode table entry */
+
+#define KDSIGACCEPT	0x4B4E	/* accept kbd generated signals */
+
+struct kbd_repeat {
+	int delay;	/* in msec; <= 0: don't change */
+	int period;	/* in msec; <= 0: don't change */
+			/* earlier this field was misnamed "rate" */
+};
+
+#define KDKBDREP        0x4B52  /* set keyboard delay/repeat rate;
+				 * actually used values are returned */
+
+#define KDFONTOP	0x4B72	/* font operations */
+
+struct console_font_op {
+	unsigned int op;	/* operation code KD_FONT_OP_* */
+	unsigned int flags;	/* KD_FONT_FLAG_* */
+	unsigned int width, height;	/* font size */
+	unsigned int charcount;
+	unsigned char __user *data;	/* font data with height fixed to 32 */
+};
+
+struct console_font {
+	unsigned int width, height;	/* font size */
+	unsigned int charcount;
+	unsigned char *data;	/* font data with height fixed to 32 */
+};
+
+#define KD_FONT_OP_SET		0	/* Set font */
+#define KD_FONT_OP_GET		1	/* Get font */
+#define KD_FONT_OP_SET_DEFAULT	2	/* Set font to default, data points to name / NULL */
+#define KD_FONT_OP_COPY		3	/* Copy from another console */
+
+#define KD_FONT_FLAG_DONT_RECALC 	1	/* Don't recalculate hw charcell size [compat] */
+
+/* note: 0x4B00-0x4B4E all have had a value at some time;
+   don't reuse for the time being */
+/* note: 0x4B60-0x4B6D, 0x4B70-0x4B72 used above */
+
+#endif /* _UAPI_LINUX_KD_H */
diff --git a/include/uapi/linux/kdev_t.h b/include/uapi/linux/kdev_t.h
new file mode 100644
index 0000000..0d881fa
--- /dev/null
+++ b/include/uapi/linux/kdev_t.h
@@ -0,0 +1,13 @@
+#ifndef _UAPI_LINUX_KDEV_T_H
+#define _UAPI_LINUX_KDEV_T_H
+#ifndef __KERNEL__
+
+/*
+Some programs want their definitions of MAJOR and MINOR and MKDEV
+from the kernel sources. These must be the externally visible ones.
+*/
+#define MAJOR(dev)	((dev)>>8)
+#define MINOR(dev)	((dev) & 0xff)
+#define MKDEV(ma,mi)	((ma)<<8 | (mi))
+#endif /* __KERNEL__ */
+#endif /* _UAPI_LINUX_KDEV_T_H */
diff --git a/include/uapi/linux/kernel-page-flags.h b/include/uapi/linux/kernel-page-flags.h
new file mode 100644
index 0000000..5116a0e
--- /dev/null
+++ b/include/uapi/linux/kernel-page-flags.h
@@ -0,0 +1,36 @@
+#ifndef _UAPILINUX_KERNEL_PAGE_FLAGS_H
+#define _UAPILINUX_KERNEL_PAGE_FLAGS_H
+
+/*
+ * Stable page flag bits exported to user space
+ */
+
+#define KPF_LOCKED		0
+#define KPF_ERROR		1
+#define KPF_REFERENCED		2
+#define KPF_UPTODATE		3
+#define KPF_DIRTY		4
+#define KPF_LRU			5
+#define KPF_ACTIVE		6
+#define KPF_SLAB		7
+#define KPF_WRITEBACK		8
+#define KPF_RECLAIM		9
+#define KPF_BUDDY		10
+
+/* 11-20: new additions in 2.6.31 */
+#define KPF_MMAP		11
+#define KPF_ANON		12
+#define KPF_SWAPCACHE		13
+#define KPF_SWAPBACKED		14
+#define KPF_COMPOUND_HEAD	15
+#define KPF_COMPOUND_TAIL	16
+#define KPF_HUGE		17
+#define KPF_UNEVICTABLE		18
+#define KPF_HWPOISON		19
+#define KPF_NOPAGE		20
+
+#define KPF_KSM			21
+#define KPF_THP			22
+
+
+#endif /* _UAPILINUX_KERNEL_PAGE_FLAGS_H */
diff --git a/include/uapi/linux/kernel.h b/include/uapi/linux/kernel.h
new file mode 100644
index 0000000..321e399
--- /dev/null
+++ b/include/uapi/linux/kernel.h
@@ -0,0 +1,13 @@
+#ifndef _UAPI_LINUX_KERNEL_H
+#define _UAPI_LINUX_KERNEL_H
+
+#include <linux/sysinfo.h>
+
+/*
+ * 'kernel.h' contains some often-used function prototypes etc
+ */
+#define __ALIGN_KERNEL(x, a)		__ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1)
+#define __ALIGN_KERNEL_MASK(x, mask)	(((x) + (mask)) & ~(mask))
+
+
+#endif /* _UAPI_LINUX_KERNEL_H */
diff --git a/include/uapi/linux/kernelcapi.h b/include/uapi/linux/kernelcapi.h
new file mode 100644
index 0000000..89bf40d
--- /dev/null
+++ b/include/uapi/linux/kernelcapi.h
@@ -0,0 +1,47 @@
+/*
+ * $Id: kernelcapi.h,v 1.8.6.2 2001/02/07 11:31:31 kai Exp $
+ * 
+ * Kernel CAPI 2.0 Interface for Linux
+ * 
+ * (c) Copyright 1997 by Carsten Paeth (calle@calle.in-berlin.de)
+ * 
+ */
+
+#ifndef _UAPI__KERNELCAPI_H__
+#define _UAPI__KERNELCAPI_H__
+
+#define CAPI_MAXAPPL	240	/* maximum number of applications  */
+#define CAPI_MAXCONTR	32	/* maximum number of controller    */
+#define CAPI_MAXDATAWINDOW	8
+
+
+typedef struct kcapi_flagdef {
+	int contr;
+	int flag;
+} kcapi_flagdef;
+
+typedef struct kcapi_carddef {
+	char		driver[32];
+	unsigned int	port;
+	unsigned	irq;
+	unsigned int	membase;
+	int		cardnr;
+} kcapi_carddef;
+
+/* new ioctls >= 10 */
+#define KCAPI_CMD_TRACE		10
+#define KCAPI_CMD_ADDCARD	11	/* OBSOLETE */
+
+/* 
+ * flag > 2 => trace also data
+ * flag & 1 => show trace
+ */
+#define KCAPI_TRACE_OFF			0
+#define KCAPI_TRACE_SHORT_NO_DATA	1
+#define KCAPI_TRACE_FULL_NO_DATA	2
+#define KCAPI_TRACE_SHORT		3
+#define KCAPI_TRACE_FULL		4
+
+
+
+#endif /* _UAPI__KERNELCAPI_H__ */
diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h
new file mode 100644
index 0000000..104838f
--- /dev/null
+++ b/include/uapi/linux/kexec.h
@@ -0,0 +1,54 @@
+#ifndef _UAPILINUX_KEXEC_H
+#define _UAPILINUX_KEXEC_H
+
+/* kexec system call -  It loads the new kernel to boot into.
+ * kexec does not sync, or unmount filesystems so if you need
+ * that to happen you need to do that yourself.
+ */
+
+#include <linux/types.h>
+
+/* kexec flags for different usage scenarios */
+#define KEXEC_ON_CRASH		0x00000001
+#define KEXEC_PRESERVE_CONTEXT	0x00000002
+#define KEXEC_ARCH_MASK		0xffff0000
+
+/* These values match the ELF architecture values.
+ * Unless there is a good reason that should continue to be the case.
+ */
+#define KEXEC_ARCH_DEFAULT ( 0 << 16)
+#define KEXEC_ARCH_386     ( 3 << 16)
+#define KEXEC_ARCH_X86_64  (62 << 16)
+#define KEXEC_ARCH_PPC     (20 << 16)
+#define KEXEC_ARCH_PPC64   (21 << 16)
+#define KEXEC_ARCH_IA_64   (50 << 16)
+#define KEXEC_ARCH_ARM     (40 << 16)
+#define KEXEC_ARCH_S390    (22 << 16)
+#define KEXEC_ARCH_SH      (42 << 16)
+#define KEXEC_ARCH_MIPS_LE (10 << 16)
+#define KEXEC_ARCH_MIPS    ( 8 << 16)
+
+/* The artificial cap on the number of segments passed to kexec_load. */
+#define KEXEC_SEGMENT_MAX 16
+
+#ifndef __KERNEL__
+/*
+ * This structure is used to hold the arguments that are used when
+ * loading  kernel binaries.
+ */
+struct kexec_segment {
+	const void *buf;
+	size_t bufsz;
+	const void *mem;
+	size_t memsz;
+};
+
+/* Load a new kernel image as described by the kexec_segment array
+ * consisting of passed number of segments at the entry-point address.
+ * The flags allow different useage types.
+ */
+extern int kexec_load(void *, size_t, struct kexec_segment *,
+		unsigned long int);
+#endif /* __KERNEL__ */
+
+#endif /* _UAPILINUX_KEXEC_H */
diff --git a/include/uapi/linux/keyboard.h b/include/uapi/linux/keyboard.h
new file mode 100644
index 0000000..5a68497
--- /dev/null
+++ b/include/uapi/linux/keyboard.h
@@ -0,0 +1,443 @@
+#ifndef _UAPI__LINUX_KEYBOARD_H
+#define _UAPI__LINUX_KEYBOARD_H
+
+#include <linux/wait.h>
+
+#define KG_SHIFT	0
+#define KG_CTRL		2
+#define KG_ALT		3
+#define KG_ALTGR	1
+#define KG_SHIFTL	4
+#define KG_KANASHIFT	4
+#define KG_SHIFTR	5
+#define KG_CTRLL	6
+#define KG_CTRLR	7
+#define KG_CAPSSHIFT	8
+
+#define NR_SHIFT	9
+
+#define NR_KEYS		256
+#define MAX_NR_KEYMAPS	256
+/* This means 128Kb if all keymaps are allocated. Only the superuser
+	may increase the number of keymaps beyond MAX_NR_OF_USER_KEYMAPS. */
+#define MAX_NR_OF_USER_KEYMAPS 256 	/* should be at least 7 */
+
+
+#define MAX_NR_FUNC	256	/* max nr of strings assigned to keys */
+
+#define KT_LATIN	0	/* we depend on this being zero */
+#define KT_LETTER	11	/* symbol that can be acted upon by CapsLock */
+#define KT_FN		1
+#define KT_SPEC		2
+#define KT_PAD		3
+#define KT_DEAD		4
+#define KT_CONS		5
+#define KT_CUR		6
+#define KT_SHIFT	7
+#define KT_META		8
+#define KT_ASCII	9
+#define KT_LOCK		10
+#define KT_SLOCK	12
+#define KT_DEAD2	13
+#define KT_BRL		14
+
+#define K(t,v)		(((t)<<8)|(v))
+#define KTYP(x)		((x) >> 8)
+#define KVAL(x)		((x) & 0xff)
+
+#define K_F1		K(KT_FN,0)
+#define K_F2		K(KT_FN,1)
+#define K_F3		K(KT_FN,2)
+#define K_F4		K(KT_FN,3)
+#define K_F5		K(KT_FN,4)
+#define K_F6		K(KT_FN,5)
+#define K_F7		K(KT_FN,6)
+#define K_F8		K(KT_FN,7)
+#define K_F9		K(KT_FN,8)
+#define K_F10		K(KT_FN,9)
+#define K_F11		K(KT_FN,10)
+#define K_F12		K(KT_FN,11)
+#define K_F13		K(KT_FN,12)
+#define K_F14		K(KT_FN,13)
+#define K_F15		K(KT_FN,14)
+#define K_F16		K(KT_FN,15)
+#define K_F17		K(KT_FN,16)
+#define K_F18		K(KT_FN,17)
+#define K_F19		K(KT_FN,18)
+#define K_F20		K(KT_FN,19)
+#define K_FIND		K(KT_FN,20)
+#define K_INSERT	K(KT_FN,21)
+#define K_REMOVE	K(KT_FN,22)
+#define K_SELECT	K(KT_FN,23)
+#define K_PGUP		K(KT_FN,24) /* PGUP is a synonym for PRIOR */
+#define K_PGDN		K(KT_FN,25) /* PGDN is a synonym for NEXT */
+#define K_MACRO	 	K(KT_FN,26)
+#define K_HELP		K(KT_FN,27)
+#define K_DO		K(KT_FN,28)
+#define K_PAUSE	 	K(KT_FN,29)
+#define K_F21		K(KT_FN,30)
+#define K_F22		K(KT_FN,31)
+#define K_F23		K(KT_FN,32)
+#define K_F24		K(KT_FN,33)
+#define K_F25		K(KT_FN,34)
+#define K_F26		K(KT_FN,35)
+#define K_F27		K(KT_FN,36)
+#define K_F28		K(KT_FN,37)
+#define K_F29		K(KT_FN,38)
+#define K_F30		K(KT_FN,39)
+#define K_F31		K(KT_FN,40)
+#define K_F32		K(KT_FN,41)
+#define K_F33		K(KT_FN,42)
+#define K_F34		K(KT_FN,43)
+#define K_F35		K(KT_FN,44)
+#define K_F36		K(KT_FN,45)
+#define K_F37		K(KT_FN,46)
+#define K_F38		K(KT_FN,47)
+#define K_F39		K(KT_FN,48)
+#define K_F40		K(KT_FN,49)
+#define K_F41		K(KT_FN,50)
+#define K_F42		K(KT_FN,51)
+#define K_F43		K(KT_FN,52)
+#define K_F44		K(KT_FN,53)
+#define K_F45		K(KT_FN,54)
+#define K_F46		K(KT_FN,55)
+#define K_F47		K(KT_FN,56)
+#define K_F48		K(KT_FN,57)
+#define K_F49		K(KT_FN,58)
+#define K_F50		K(KT_FN,59)
+#define K_F51		K(KT_FN,60)
+#define K_F52		K(KT_FN,61)
+#define K_F53		K(KT_FN,62)
+#define K_F54		K(KT_FN,63)
+#define K_F55		K(KT_FN,64)
+#define K_F56		K(KT_FN,65)
+#define K_F57		K(KT_FN,66)
+#define K_F58		K(KT_FN,67)
+#define K_F59		K(KT_FN,68)
+#define K_F60		K(KT_FN,69)
+#define K_F61		K(KT_FN,70)
+#define K_F62		K(KT_FN,71)
+#define K_F63		K(KT_FN,72)
+#define K_F64		K(KT_FN,73)
+#define K_F65		K(KT_FN,74)
+#define K_F66		K(KT_FN,75)
+#define K_F67		K(KT_FN,76)
+#define K_F68		K(KT_FN,77)
+#define K_F69		K(KT_FN,78)
+#define K_F70		K(KT_FN,79)
+#define K_F71		K(KT_FN,80)
+#define K_F72		K(KT_FN,81)
+#define K_F73		K(KT_FN,82)
+#define K_F74		K(KT_FN,83)
+#define K_F75		K(KT_FN,84)
+#define K_F76		K(KT_FN,85)
+#define K_F77		K(KT_FN,86)
+#define K_F78		K(KT_FN,87)
+#define K_F79		K(KT_FN,88)
+#define K_F80		K(KT_FN,89)
+#define K_F81		K(KT_FN,90)
+#define K_F82		K(KT_FN,91)
+#define K_F83		K(KT_FN,92)
+#define K_F84		K(KT_FN,93)
+#define K_F85		K(KT_FN,94)
+#define K_F86		K(KT_FN,95)
+#define K_F87		K(KT_FN,96)
+#define K_F88		K(KT_FN,97)
+#define K_F89		K(KT_FN,98)
+#define K_F90		K(KT_FN,99)
+#define K_F91		K(KT_FN,100)
+#define K_F92		K(KT_FN,101)
+#define K_F93		K(KT_FN,102)
+#define K_F94		K(KT_FN,103)
+#define K_F95		K(KT_FN,104)
+#define K_F96		K(KT_FN,105)
+#define K_F97		K(KT_FN,106)
+#define K_F98		K(KT_FN,107)
+#define K_F99		K(KT_FN,108)
+#define K_F100		K(KT_FN,109)
+#define K_F101		K(KT_FN,110)
+#define K_F102		K(KT_FN,111)
+#define K_F103		K(KT_FN,112)
+#define K_F104		K(KT_FN,113)
+#define K_F105		K(KT_FN,114)
+#define K_F106		K(KT_FN,115)
+#define K_F107		K(KT_FN,116)
+#define K_F108		K(KT_FN,117)
+#define K_F109		K(KT_FN,118)
+#define K_F110		K(KT_FN,119)
+#define K_F111		K(KT_FN,120)
+#define K_F112		K(KT_FN,121)
+#define K_F113		K(KT_FN,122)
+#define K_F114		K(KT_FN,123)
+#define K_F115		K(KT_FN,124)
+#define K_F116		K(KT_FN,125)
+#define K_F117		K(KT_FN,126)
+#define K_F118		K(KT_FN,127)
+#define K_F119		K(KT_FN,128)
+#define K_F120		K(KT_FN,129)
+#define K_F121		K(KT_FN,130)
+#define K_F122		K(KT_FN,131)
+#define K_F123		K(KT_FN,132)
+#define K_F124		K(KT_FN,133)
+#define K_F125		K(KT_FN,134)
+#define K_F126		K(KT_FN,135)
+#define K_F127		K(KT_FN,136)
+#define K_F128		K(KT_FN,137)
+#define K_F129		K(KT_FN,138)
+#define K_F130		K(KT_FN,139)
+#define K_F131		K(KT_FN,140)
+#define K_F132		K(KT_FN,141)
+#define K_F133		K(KT_FN,142)
+#define K_F134		K(KT_FN,143)
+#define K_F135		K(KT_FN,144)
+#define K_F136		K(KT_FN,145)
+#define K_F137		K(KT_FN,146)
+#define K_F138		K(KT_FN,147)
+#define K_F139		K(KT_FN,148)
+#define K_F140		K(KT_FN,149)
+#define K_F141		K(KT_FN,150)
+#define K_F142		K(KT_FN,151)
+#define K_F143		K(KT_FN,152)
+#define K_F144		K(KT_FN,153)
+#define K_F145		K(KT_FN,154)
+#define K_F146		K(KT_FN,155)
+#define K_F147		K(KT_FN,156)
+#define K_F148		K(KT_FN,157)
+#define K_F149		K(KT_FN,158)
+#define K_F150		K(KT_FN,159)
+#define K_F151		K(KT_FN,160)
+#define K_F152		K(KT_FN,161)
+#define K_F153		K(KT_FN,162)
+#define K_F154		K(KT_FN,163)
+#define K_F155		K(KT_FN,164)
+#define K_F156		K(KT_FN,165)
+#define K_F157		K(KT_FN,166)
+#define K_F158		K(KT_FN,167)
+#define K_F159		K(KT_FN,168)
+#define K_F160		K(KT_FN,169)
+#define K_F161		K(KT_FN,170)
+#define K_F162		K(KT_FN,171)
+#define K_F163		K(KT_FN,172)
+#define K_F164		K(KT_FN,173)
+#define K_F165		K(KT_FN,174)
+#define K_F166		K(KT_FN,175)
+#define K_F167		K(KT_FN,176)
+#define K_F168		K(KT_FN,177)
+#define K_F169		K(KT_FN,178)
+#define K_F170		K(KT_FN,179)
+#define K_F171		K(KT_FN,180)
+#define K_F172		K(KT_FN,181)
+#define K_F173		K(KT_FN,182)
+#define K_F174		K(KT_FN,183)
+#define K_F175		K(KT_FN,184)
+#define K_F176		K(KT_FN,185)
+#define K_F177		K(KT_FN,186)
+#define K_F178		K(KT_FN,187)
+#define K_F179		K(KT_FN,188)
+#define K_F180		K(KT_FN,189)
+#define K_F181		K(KT_FN,190)
+#define K_F182		K(KT_FN,191)
+#define K_F183		K(KT_FN,192)
+#define K_F184		K(KT_FN,193)
+#define K_F185		K(KT_FN,194)
+#define K_F186		K(KT_FN,195)
+#define K_F187		K(KT_FN,196)
+#define K_F188		K(KT_FN,197)
+#define K_F189		K(KT_FN,198)
+#define K_F190		K(KT_FN,199)
+#define K_F191		K(KT_FN,200)
+#define K_F192		K(KT_FN,201)
+#define K_F193		K(KT_FN,202)
+#define K_F194		K(KT_FN,203)
+#define K_F195		K(KT_FN,204)
+#define K_F196		K(KT_FN,205)
+#define K_F197		K(KT_FN,206)
+#define K_F198		K(KT_FN,207)
+#define K_F199		K(KT_FN,208)
+#define K_F200		K(KT_FN,209)
+#define K_F201		K(KT_FN,210)
+#define K_F202		K(KT_FN,211)
+#define K_F203		K(KT_FN,212)
+#define K_F204		K(KT_FN,213)
+#define K_F205		K(KT_FN,214)
+#define K_F206		K(KT_FN,215)
+#define K_F207		K(KT_FN,216)
+#define K_F208		K(KT_FN,217)
+#define K_F209		K(KT_FN,218)
+#define K_F210		K(KT_FN,219)
+#define K_F211		K(KT_FN,220)
+#define K_F212		K(KT_FN,221)
+#define K_F213		K(KT_FN,222)
+#define K_F214		K(KT_FN,223)
+#define K_F215		K(KT_FN,224)
+#define K_F216		K(KT_FN,225)
+#define K_F217		K(KT_FN,226)
+#define K_F218		K(KT_FN,227)
+#define K_F219		K(KT_FN,228)
+#define K_F220		K(KT_FN,229)
+#define K_F221		K(KT_FN,230)
+#define K_F222		K(KT_FN,231)
+#define K_F223		K(KT_FN,232)
+#define K_F224		K(KT_FN,233)
+#define K_F225		K(KT_FN,234)
+#define K_F226		K(KT_FN,235)
+#define K_F227		K(KT_FN,236)
+#define K_F228		K(KT_FN,237)
+#define K_F229		K(KT_FN,238)
+#define K_F230		K(KT_FN,239)
+#define K_F231		K(KT_FN,240)
+#define K_F232		K(KT_FN,241)
+#define K_F233		K(KT_FN,242)
+#define K_F234		K(KT_FN,243)
+#define K_F235		K(KT_FN,244)
+#define K_F236		K(KT_FN,245)
+#define K_F237		K(KT_FN,246)
+#define K_F238		K(KT_FN,247)
+#define K_F239		K(KT_FN,248)
+#define K_F240		K(KT_FN,249)
+#define K_F241		K(KT_FN,250)
+#define K_F242		K(KT_FN,251)
+#define K_F243		K(KT_FN,252)
+#define K_F244		K(KT_FN,253)
+#define K_F245		K(KT_FN,254)
+#define K_UNDO		K(KT_FN,255)
+
+
+#define K_HOLE		K(KT_SPEC,0)
+#define K_ENTER		K(KT_SPEC,1)
+#define K_SH_REGS	K(KT_SPEC,2)
+#define K_SH_MEM	K(KT_SPEC,3)
+#define K_SH_STAT	K(KT_SPEC,4)
+#define K_BREAK		K(KT_SPEC,5)
+#define K_CONS		K(KT_SPEC,6)
+#define K_CAPS		K(KT_SPEC,7)
+#define K_NUM		K(KT_SPEC,8)
+#define K_HOLD		K(KT_SPEC,9)
+#define K_SCROLLFORW	K(KT_SPEC,10)
+#define K_SCROLLBACK	K(KT_SPEC,11)
+#define K_BOOT		K(KT_SPEC,12)
+#define K_CAPSON	K(KT_SPEC,13)
+#define K_COMPOSE	K(KT_SPEC,14)
+#define K_SAK		K(KT_SPEC,15)
+#define K_DECRCONSOLE	K(KT_SPEC,16)
+#define K_INCRCONSOLE	K(KT_SPEC,17)
+#define K_SPAWNCONSOLE	K(KT_SPEC,18)
+#define K_BARENUMLOCK	K(KT_SPEC,19)
+
+#define K_ALLOCATED	K(KT_SPEC,126) /* dynamically allocated keymap */
+#define K_NOSUCHMAP	K(KT_SPEC,127) /* returned by KDGKBENT */
+
+#define K_P0		K(KT_PAD,0)
+#define K_P1		K(KT_PAD,1)
+#define K_P2		K(KT_PAD,2)
+#define K_P3		K(KT_PAD,3)
+#define K_P4		K(KT_PAD,4)
+#define K_P5		K(KT_PAD,5)
+#define K_P6		K(KT_PAD,6)
+#define K_P7		K(KT_PAD,7)
+#define K_P8		K(KT_PAD,8)
+#define K_P9		K(KT_PAD,9)
+#define K_PPLUS		K(KT_PAD,10)	/* key-pad plus */
+#define K_PMINUS	K(KT_PAD,11)	/* key-pad minus */
+#define K_PSTAR		K(KT_PAD,12)	/* key-pad asterisk (star) */
+#define K_PSLASH	K(KT_PAD,13)	/* key-pad slash */
+#define K_PENTER	K(KT_PAD,14)	/* key-pad enter */
+#define K_PCOMMA	K(KT_PAD,15)	/* key-pad comma: kludge... */
+#define K_PDOT		K(KT_PAD,16)	/* key-pad dot (period): kludge... */
+#define K_PPLUSMINUS	K(KT_PAD,17)	/* key-pad plus/minus */
+#define K_PPARENL	K(KT_PAD,18)	/* key-pad left parenthesis */
+#define K_PPARENR	K(KT_PAD,19)	/* key-pad right parenthesis */
+
+#define NR_PAD		20
+
+#define K_DGRAVE	K(KT_DEAD,0)
+#define K_DACUTE	K(KT_DEAD,1)
+#define K_DCIRCM	K(KT_DEAD,2)
+#define K_DTILDE	K(KT_DEAD,3)
+#define K_DDIERE	K(KT_DEAD,4)
+#define K_DCEDIL	K(KT_DEAD,5)
+
+#define NR_DEAD		6
+
+#define K_DOWN		K(KT_CUR,0)
+#define K_LEFT		K(KT_CUR,1)
+#define K_RIGHT		K(KT_CUR,2)
+#define K_UP		K(KT_CUR,3)
+
+#define K_SHIFT		K(KT_SHIFT,KG_SHIFT)
+#define K_CTRL		K(KT_SHIFT,KG_CTRL)
+#define K_ALT		K(KT_SHIFT,KG_ALT)
+#define K_ALTGR		K(KT_SHIFT,KG_ALTGR)
+#define K_SHIFTL	K(KT_SHIFT,KG_SHIFTL)
+#define K_SHIFTR	K(KT_SHIFT,KG_SHIFTR)
+#define K_CTRLL	 	K(KT_SHIFT,KG_CTRLL)
+#define K_CTRLR	 	K(KT_SHIFT,KG_CTRLR)
+#define K_CAPSSHIFT	K(KT_SHIFT,KG_CAPSSHIFT)
+
+#define K_ASC0		K(KT_ASCII,0)
+#define K_ASC1		K(KT_ASCII,1)
+#define K_ASC2		K(KT_ASCII,2)
+#define K_ASC3		K(KT_ASCII,3)
+#define K_ASC4		K(KT_ASCII,4)
+#define K_ASC5		K(KT_ASCII,5)
+#define K_ASC6		K(KT_ASCII,6)
+#define K_ASC7		K(KT_ASCII,7)
+#define K_ASC8		K(KT_ASCII,8)
+#define K_ASC9		K(KT_ASCII,9)
+#define K_HEX0		K(KT_ASCII,10)
+#define K_HEX1		K(KT_ASCII,11)
+#define K_HEX2		K(KT_ASCII,12)
+#define K_HEX3		K(KT_ASCII,13)
+#define K_HEX4		K(KT_ASCII,14)
+#define K_HEX5		K(KT_ASCII,15)
+#define K_HEX6		K(KT_ASCII,16)
+#define K_HEX7		K(KT_ASCII,17)
+#define K_HEX8		K(KT_ASCII,18)
+#define K_HEX9		K(KT_ASCII,19)
+#define K_HEXa		K(KT_ASCII,20)
+#define K_HEXb		K(KT_ASCII,21)
+#define K_HEXc		K(KT_ASCII,22)
+#define K_HEXd		K(KT_ASCII,23)
+#define K_HEXe		K(KT_ASCII,24)
+#define K_HEXf		K(KT_ASCII,25)
+
+#define NR_ASCII	26
+
+#define K_SHIFTLOCK	K(KT_LOCK,KG_SHIFT)
+#define K_CTRLLOCK	K(KT_LOCK,KG_CTRL)
+#define K_ALTLOCK	K(KT_LOCK,KG_ALT)
+#define K_ALTGRLOCK	K(KT_LOCK,KG_ALTGR)
+#define K_SHIFTLLOCK	K(KT_LOCK,KG_SHIFTL)
+#define K_SHIFTRLOCK	K(KT_LOCK,KG_SHIFTR)
+#define K_CTRLLLOCK	K(KT_LOCK,KG_CTRLL)
+#define K_CTRLRLOCK	K(KT_LOCK,KG_CTRLR)
+#define K_CAPSSHIFTLOCK	K(KT_LOCK,KG_CAPSSHIFT)
+
+#define K_SHIFT_SLOCK	K(KT_SLOCK,KG_SHIFT)
+#define K_CTRL_SLOCK	K(KT_SLOCK,KG_CTRL)
+#define K_ALT_SLOCK	K(KT_SLOCK,KG_ALT)
+#define K_ALTGR_SLOCK	K(KT_SLOCK,KG_ALTGR)
+#define K_SHIFTL_SLOCK	K(KT_SLOCK,KG_SHIFTL)
+#define K_SHIFTR_SLOCK	K(KT_SLOCK,KG_SHIFTR)
+#define K_CTRLL_SLOCK	K(KT_SLOCK,KG_CTRLL)
+#define K_CTRLR_SLOCK	K(KT_SLOCK,KG_CTRLR)
+#define K_CAPSSHIFT_SLOCK	K(KT_SLOCK,KG_CAPSSHIFT)
+
+#define NR_LOCK		9
+
+#define K_BRL_BLANK     K(KT_BRL, 0)
+#define K_BRL_DOT1      K(KT_BRL, 1)
+#define K_BRL_DOT2      K(KT_BRL, 2)
+#define K_BRL_DOT3      K(KT_BRL, 3)
+#define K_BRL_DOT4      K(KT_BRL, 4)
+#define K_BRL_DOT5      K(KT_BRL, 5)
+#define K_BRL_DOT6      K(KT_BRL, 6)
+#define K_BRL_DOT7      K(KT_BRL, 7)
+#define K_BRL_DOT8      K(KT_BRL, 8)
+#define K_BRL_DOT9      K(KT_BRL, 9)
+#define K_BRL_DOT10     K(KT_BRL, 10)
+
+#define NR_BRL		11
+
+#define MAX_DIACR	256
+#endif /* _UAPI__LINUX_KEYBOARD_H */
diff --git a/include/linux/keyctl.h b/include/uapi/linux/keyctl.h
similarity index 100%
rename from include/linux/keyctl.h
rename to include/uapi/linux/keyctl.h
diff --git a/include/linux/kvm.h b/include/uapi/linux/kvm.h
similarity index 100%
rename from include/linux/kvm.h
rename to include/uapi/linux/kvm.h
diff --git a/include/uapi/linux/kvm_para.h b/include/uapi/linux/kvm_para.h
new file mode 100644
index 0000000..cea2c5c
--- /dev/null
+++ b/include/uapi/linux/kvm_para.h
@@ -0,0 +1,28 @@
+#ifndef _UAPI__LINUX_KVM_PARA_H
+#define _UAPI__LINUX_KVM_PARA_H
+
+/*
+ * This header file provides a method for making a hypercall to the host
+ * Architectures should define:
+ * - kvm_hypercall0, kvm_hypercall1...
+ * - kvm_arch_para_features
+ * - kvm_para_available
+ */
+
+/* Return values for hypercalls */
+#define KVM_ENOSYS		1000
+#define KVM_EFAULT		EFAULT
+#define KVM_E2BIG		E2BIG
+#define KVM_EPERM		EPERM
+
+#define KVM_HC_VAPIC_POLL_IRQ		1
+#define KVM_HC_MMU_OP			2
+#define KVM_HC_FEATURES			3
+#define KVM_HC_PPC_MAP_MAGIC_PAGE	4
+
+/*
+ * hypercalls use architecture specific
+ */
+#include <asm/kvm_para.h>
+
+#endif /* _UAPI__LINUX_KVM_PARA_H */
diff --git a/include/uapi/linux/l2tp.h b/include/uapi/linux/l2tp.h
new file mode 100644
index 0000000..8adb681
--- /dev/null
+++ b/include/uapi/linux/l2tp.h
@@ -0,0 +1,180 @@
+/*
+ * L2TP-over-IP socket for L2TPv3.
+ *
+ * Author: James Chapman <jchapman@katalix.com>
+ */
+
+#ifndef _UAPI_LINUX_L2TP_H_
+#define _UAPI_LINUX_L2TP_H_
+
+#include <linux/types.h>
+#include <linux/socket.h>
+#ifndef __KERNEL__
+#include <netinet/in.h>
+#endif
+
+#define IPPROTO_L2TP		115
+
+/**
+ * struct sockaddr_l2tpip - the sockaddr structure for L2TP-over-IP sockets
+ * @l2tp_family:  address family number AF_L2TPIP.
+ * @l2tp_addr:    protocol specific address information
+ * @l2tp_conn_id: connection id of tunnel
+ */
+#define __SOCK_SIZE__	16		/* sizeof(struct sockaddr)	*/
+struct sockaddr_l2tpip {
+	/* The first fields must match struct sockaddr_in */
+	__kernel_sa_family_t l2tp_family; /* AF_INET */
+	__be16		l2tp_unused;	/* INET port number (unused) */
+	struct in_addr	l2tp_addr;	/* Internet address */
+
+	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
+
+	/* Pad to size of `struct sockaddr'. */
+	unsigned char	__pad[sizeof(struct sockaddr) -
+			      sizeof(__kernel_sa_family_t) -
+			      sizeof(__be16) - sizeof(struct in_addr) -
+			      sizeof(__u32)];
+};
+
+/**
+ * struct sockaddr_l2tpip6 - the sockaddr structure for L2TP-over-IPv6 sockets
+ * @l2tp_family:  address family number AF_L2TPIP.
+ * @l2tp_addr:    protocol specific address information
+ * @l2tp_conn_id: connection id of tunnel
+ */
+struct sockaddr_l2tpip6 {
+	/* The first fields must match struct sockaddr_in6 */
+	__kernel_sa_family_t l2tp_family; /* AF_INET6 */
+	__be16		l2tp_unused;	/* INET port number (unused) */
+	__be32		l2tp_flowinfo;	/* IPv6 flow information */
+	struct in6_addr	l2tp_addr;	/* IPv6 address */
+	__u32		l2tp_scope_id;	/* scope id (new in RFC2553) */
+	__u32		l2tp_conn_id;	/* Connection ID of tunnel */
+};
+
+/*****************************************************************************
+ *  NETLINK_GENERIC netlink family.
+ *****************************************************************************/
+
+/*
+ * Commands.
+ * Valid TLVs of each command are:-
+ * TUNNEL_CREATE	- CONN_ID, pw_type, netns, ifname, ipinfo, udpinfo, udpcsum, vlanid
+ * TUNNEL_DELETE	- CONN_ID
+ * TUNNEL_MODIFY	- CONN_ID, udpcsum
+ * TUNNEL_GETSTATS	- CONN_ID, (stats)
+ * TUNNEL_GET		- CONN_ID, (...)
+ * SESSION_CREATE	- SESSION_ID, PW_TYPE, offset, data_seq, cookie, peer_cookie, offset, l2spec
+ * SESSION_DELETE	- SESSION_ID
+ * SESSION_MODIFY	- SESSION_ID, data_seq
+ * SESSION_GET		- SESSION_ID, (...)
+ * SESSION_GETSTATS	- SESSION_ID, (stats)
+ *
+ */
+enum {
+	L2TP_CMD_NOOP,
+	L2TP_CMD_TUNNEL_CREATE,
+	L2TP_CMD_TUNNEL_DELETE,
+	L2TP_CMD_TUNNEL_MODIFY,
+	L2TP_CMD_TUNNEL_GET,
+	L2TP_CMD_SESSION_CREATE,
+	L2TP_CMD_SESSION_DELETE,
+	L2TP_CMD_SESSION_MODIFY,
+	L2TP_CMD_SESSION_GET,
+	__L2TP_CMD_MAX,
+};
+
+#define L2TP_CMD_MAX			(__L2TP_CMD_MAX - 1)
+
+/*
+ * ATTR types defined for L2TP
+ */
+enum {
+	L2TP_ATTR_NONE,			/* no data */
+	L2TP_ATTR_PW_TYPE,		/* u16, enum l2tp_pwtype */
+	L2TP_ATTR_ENCAP_TYPE,		/* u16, enum l2tp_encap_type */
+	L2TP_ATTR_OFFSET,		/* u16 */
+	L2TP_ATTR_DATA_SEQ,		/* u16 */
+	L2TP_ATTR_L2SPEC_TYPE,		/* u8, enum l2tp_l2spec_type */
+	L2TP_ATTR_L2SPEC_LEN,		/* u8, enum l2tp_l2spec_type */
+	L2TP_ATTR_PROTO_VERSION,	/* u8 */
+	L2TP_ATTR_IFNAME,		/* string */
+	L2TP_ATTR_CONN_ID,		/* u32 */
+	L2TP_ATTR_PEER_CONN_ID,		/* u32 */
+	L2TP_ATTR_SESSION_ID,		/* u32 */
+	L2TP_ATTR_PEER_SESSION_ID,	/* u32 */
+	L2TP_ATTR_UDP_CSUM,		/* u8 */
+	L2TP_ATTR_VLAN_ID,		/* u16 */
+	L2TP_ATTR_COOKIE,		/* 0, 4 or 8 bytes */
+	L2TP_ATTR_PEER_COOKIE,		/* 0, 4 or 8 bytes */
+	L2TP_ATTR_DEBUG,		/* u32 */
+	L2TP_ATTR_RECV_SEQ,		/* u8 */
+	L2TP_ATTR_SEND_SEQ,		/* u8 */
+	L2TP_ATTR_LNS_MODE,		/* u8 */
+	L2TP_ATTR_USING_IPSEC,		/* u8 */
+	L2TP_ATTR_RECV_TIMEOUT,		/* msec */
+	L2TP_ATTR_FD,			/* int */
+	L2TP_ATTR_IP_SADDR,		/* u32 */
+	L2TP_ATTR_IP_DADDR,		/* u32 */
+	L2TP_ATTR_UDP_SPORT,		/* u16 */
+	L2TP_ATTR_UDP_DPORT,		/* u16 */
+	L2TP_ATTR_MTU,			/* u16 */
+	L2TP_ATTR_MRU,			/* u16 */
+	L2TP_ATTR_STATS,		/* nested */
+	L2TP_ATTR_IP6_SADDR,		/* struct in6_addr */
+	L2TP_ATTR_IP6_DADDR,		/* struct in6_addr */
+	__L2TP_ATTR_MAX,
+};
+
+#define L2TP_ATTR_MAX			(__L2TP_ATTR_MAX - 1)
+
+/* Nested in L2TP_ATTR_STATS */
+enum {
+	L2TP_ATTR_STATS_NONE,		/* no data */
+	L2TP_ATTR_TX_PACKETS,		/* u64 */
+	L2TP_ATTR_TX_BYTES,		/* u64 */
+	L2TP_ATTR_TX_ERRORS,		/* u64 */
+	L2TP_ATTR_RX_PACKETS,		/* u64 */
+	L2TP_ATTR_RX_BYTES,		/* u64 */
+	L2TP_ATTR_RX_SEQ_DISCARDS,	/* u64 */
+	L2TP_ATTR_RX_OOS_PACKETS,	/* u64 */
+	L2TP_ATTR_RX_ERRORS,		/* u64 */
+	__L2TP_ATTR_STATS_MAX,
+};
+
+#define L2TP_ATTR_STATS_MAX		(__L2TP_ATTR_STATS_MAX - 1)
+
+enum l2tp_pwtype {
+	L2TP_PWTYPE_NONE = 0x0000,
+	L2TP_PWTYPE_ETH_VLAN = 0x0004,
+	L2TP_PWTYPE_ETH = 0x0005,
+	L2TP_PWTYPE_PPP = 0x0007,
+	L2TP_PWTYPE_PPP_AC = 0x0008,
+	L2TP_PWTYPE_IP = 0x000b,
+	__L2TP_PWTYPE_MAX
+};
+
+enum l2tp_l2spec_type {
+	L2TP_L2SPECTYPE_NONE,
+	L2TP_L2SPECTYPE_DEFAULT,
+};
+
+enum l2tp_encap_type {
+	L2TP_ENCAPTYPE_UDP,
+	L2TP_ENCAPTYPE_IP,
+};
+
+enum l2tp_seqmode {
+	L2TP_SEQ_NONE = 0,
+	L2TP_SEQ_IP = 1,
+	L2TP_SEQ_ALL = 2,
+};
+
+/*
+ * NETLINK_GENERIC related info
+ */
+#define L2TP_GENL_NAME		"l2tp"
+#define L2TP_GENL_VERSION	0x1
+
+#endif /* _UAPI_LINUX_L2TP_H_ */
diff --git a/include/linux/limits.h b/include/uapi/linux/limits.h
similarity index 100%
rename from include/linux/limits.h
rename to include/uapi/linux/limits.h
diff --git a/include/uapi/linux/llc.h b/include/uapi/linux/llc.h
new file mode 100644
index 0000000..9c987a4
--- /dev/null
+++ b/include/uapi/linux/llc.h
@@ -0,0 +1,84 @@
+/*
+ * IEEE 802.2 User Interface SAPs for Linux, data structures and indicators.
+ *
+ * Copyright (c) 2001 by Jay Schulist <jschlst@samba.org>
+ *
+ * This program can be redistributed or modified under the terms of the
+ * GNU General Public License as published by the Free Software Foundation.
+ * This program is distributed without any warranty or implied warranty
+ * of merchantability or fitness for a particular purpose.
+ *
+ * See the GNU General Public License for more details.
+ */
+#ifndef _UAPI__LINUX_LLC_H
+#define _UAPI__LINUX_LLC_H
+
+#include <linux/socket.h>
+
+#define __LLC_SOCK_SIZE__ 16	/* sizeof(sockaddr_llc), word align. */
+struct sockaddr_llc {
+	__kernel_sa_family_t sllc_family; /* AF_LLC */
+	__kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */
+	unsigned char   sllc_test;
+	unsigned char   sllc_xid;
+	unsigned char	sllc_ua;	/* UA data, only for SOCK_STREAM. */
+	unsigned char   sllc_sap;
+	unsigned char   sllc_mac[IFHWADDRLEN];
+	unsigned char   __pad[__LLC_SOCK_SIZE__ -
+			      sizeof(__kernel_sa_family_t) * 2 -
+			      sizeof(unsigned char) * 4 - IFHWADDRLEN];
+};
+
+/* sockopt definitions. */
+enum llc_sockopts {
+	LLC_OPT_UNKNOWN = 0,
+	LLC_OPT_RETRY,		/* max retrans attempts. */
+	LLC_OPT_SIZE,		/* max PDU size (octets). */
+	LLC_OPT_ACK_TMR_EXP,	/* ack expire time (secs). */
+	LLC_OPT_P_TMR_EXP,	/* pf cycle expire time (secs). */
+	LLC_OPT_REJ_TMR_EXP,	/* rej sent expire time (secs). */
+	LLC_OPT_BUSY_TMR_EXP,	/* busy state expire time (secs). */
+	LLC_OPT_TX_WIN,		/* tx window size. */
+	LLC_OPT_RX_WIN,		/* rx window size. */
+	LLC_OPT_PKTINFO,	/* ancillary packet information. */
+	LLC_OPT_MAX
+};
+
+#define LLC_OPT_MAX_RETRY	 100
+#define LLC_OPT_MAX_SIZE	4196
+#define LLC_OPT_MAX_WIN		 127
+#define LLC_OPT_MAX_ACK_TMR_EXP	  60
+#define LLC_OPT_MAX_P_TMR_EXP	  60
+#define LLC_OPT_MAX_REJ_TMR_EXP	  60
+#define LLC_OPT_MAX_BUSY_TMR_EXP  60
+
+/* LLC SAP types. */
+#define LLC_SAP_NULL	0x00		/* NULL SAP. 			*/
+#define LLC_SAP_LLC	0x02		/* LLC Sublayer Management. 	*/
+#define LLC_SAP_SNA	0x04		/* SNA Path Control. 		*/
+#define LLC_SAP_PNM	0x0E		/* Proway Network Management.	*/	
+#define LLC_SAP_IP	0x06		/* TCP/IP. 			*/
+#define LLC_SAP_BSPAN	0x42		/* Bridge Spanning Tree Proto	*/
+#define LLC_SAP_MMS	0x4E		/* Manufacturing Message Srv.	*/
+#define LLC_SAP_8208	0x7E		/* ISO 8208			*/
+#define LLC_SAP_3COM	0x80		/* 3COM. 			*/
+#define LLC_SAP_PRO	0x8E		/* Proway Active Station List	*/
+#define LLC_SAP_SNAP	0xAA		/* SNAP. 			*/
+#define LLC_SAP_BANYAN	0xBC		/* Banyan. 			*/
+#define LLC_SAP_IPX	0xE0		/* IPX/SPX. 			*/
+#define LLC_SAP_NETBEUI	0xF0		/* NetBEUI. 			*/
+#define LLC_SAP_LANMGR	0xF4		/* LanManager. 			*/
+#define LLC_SAP_IMPL	0xF8		/* IMPL				*/
+#define LLC_SAP_DISC	0xFC		/* Discovery			*/
+#define LLC_SAP_OSI	0xFE		/* OSI Network Layers. 		*/
+#define LLC_SAP_LAR	0xDC		/* LAN Address Resolution 	*/
+#define LLC_SAP_RM	0xD4		/* Resource Management 		*/
+#define LLC_SAP_GLOBAL	0xFF		/* Global SAP. 			*/
+
+struct llc_pktinfo {
+	int lpi_ifindex;
+	unsigned char lpi_sap;
+	unsigned char lpi_mac[IFHWADDRLEN];
+};
+
+#endif /* _UAPI__LINUX_LLC_H */
diff --git a/include/uapi/linux/loop.h b/include/uapi/linux/loop.h
new file mode 100644
index 0000000..e0cecd2
--- /dev/null
+++ b/include/uapi/linux/loop.h
@@ -0,0 +1,94 @@
+/*
+ * include/linux/loop.h
+ *
+ * Written by Theodore Ts'o, 3/29/93.
+ *
+ * Copyright 1993 by Theodore Ts'o.  Redistribution of this file is
+ * permitted under the GNU General Public License.
+ */
+#ifndef _UAPI_LINUX_LOOP_H
+#define _UAPI_LINUX_LOOP_H
+
+
+#define LO_NAME_SIZE	64
+#define LO_KEY_SIZE	32
+
+
+/*
+ * Loop flags
+ */
+enum {
+	LO_FLAGS_READ_ONLY	= 1,
+	LO_FLAGS_AUTOCLEAR	= 4,
+	LO_FLAGS_PARTSCAN	= 8,
+};
+
+#include <asm/posix_types.h>	/* for __kernel_old_dev_t */
+#include <linux/types.h>	/* for __u64 */
+
+/* Backwards compatibility version */
+struct loop_info {
+	int		   lo_number;		/* ioctl r/o */
+	__kernel_old_dev_t lo_device; 		/* ioctl r/o */
+	unsigned long	   lo_inode; 		/* ioctl r/o */
+	__kernel_old_dev_t lo_rdevice; 		/* ioctl r/o */
+	int		   lo_offset;
+	int		   lo_encrypt_type;
+	int		   lo_encrypt_key_size; 	/* ioctl w/o */
+	int		   lo_flags;			/* ioctl r/o */
+	char		   lo_name[LO_NAME_SIZE];
+	unsigned char	   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
+	unsigned long	   lo_init[2];
+	char		   reserved[4];
+};
+
+struct loop_info64 {
+	__u64		   lo_device;			/* ioctl r/o */
+	__u64		   lo_inode;			/* ioctl r/o */
+	__u64		   lo_rdevice;			/* ioctl r/o */
+	__u64		   lo_offset;
+	__u64		   lo_sizelimit;/* bytes, 0 == max available */
+	__u32		   lo_number;			/* ioctl r/o */
+	__u32		   lo_encrypt_type;
+	__u32		   lo_encrypt_key_size;		/* ioctl w/o */
+	__u32		   lo_flags;			/* ioctl r/o */
+	__u8		   lo_file_name[LO_NAME_SIZE];
+	__u8		   lo_crypt_name[LO_NAME_SIZE];
+	__u8		   lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
+	__u64		   lo_init[2];
+};
+
+/*
+ * Loop filter types
+ */
+
+#define LO_CRYPT_NONE		0
+#define LO_CRYPT_XOR		1
+#define LO_CRYPT_DES		2
+#define LO_CRYPT_FISH2		3    /* Twofish encryption */
+#define LO_CRYPT_BLOW		4
+#define LO_CRYPT_CAST128	5
+#define LO_CRYPT_IDEA		6
+#define LO_CRYPT_DUMMY		9
+#define LO_CRYPT_SKIPJACK	10
+#define LO_CRYPT_CRYPTOAPI	18
+#define MAX_LO_CRYPT		20
+
+/*
+ * IOCTL commands --- we will commandeer 0x4C ('L')
+ */
+
+#define LOOP_SET_FD		0x4C00
+#define LOOP_CLR_FD		0x4C01
+#define LOOP_SET_STATUS		0x4C02
+#define LOOP_GET_STATUS		0x4C03
+#define LOOP_SET_STATUS64	0x4C04
+#define LOOP_GET_STATUS64	0x4C05
+#define LOOP_CHANGE_FD		0x4C06
+#define LOOP_SET_CAPACITY	0x4C07
+
+/* /dev/loop-control interface */
+#define LOOP_CTL_ADD		0x4C80
+#define LOOP_CTL_REMOVE		0x4C81
+#define LOOP_CTL_GET_FREE	0x4C82
+#endif /* _UAPI_LINUX_LOOP_H */
diff --git a/include/uapi/linux/lp.h b/include/uapi/linux/lp.h
new file mode 100644
index 0000000..a3406a5
--- /dev/null
+++ b/include/uapi/linux/lp.h
@@ -0,0 +1,100 @@
+/*
+ * usr/include/linux/lp.h c.1991-1992 James Wiegand
+ * many modifications copyright (C) 1992 Michael K. Johnson
+ * Interrupt support added 1993 Nigel Gamble
+ * Removed 8255 status defines from inside __KERNEL__ Marcelo Tosatti 
+ */
+#ifndef _UAPI_LINUX_LP_H
+#define _UAPI_LINUX_LP_H
+
+
+/*
+ * Per POSIX guidelines, this module reserves the LP and lp prefixes
+ * These are the lp_table[minor].flags flags...
+ */
+#define LP_EXIST 0x0001
+#define LP_SELEC 0x0002
+#define LP_BUSY	 0x0004
+#define LP_BUSY_BIT_POS 2
+#define LP_OFFL	 0x0008
+#define LP_NOPA  0x0010
+#define LP_ERR   0x0020
+#define LP_ABORT 0x0040
+#define LP_CAREFUL 0x0080 /* obsoleted -arca */
+#define LP_ABORTOPEN 0x0100
+
+#define LP_TRUST_IRQ_  0x0200 /* obsolete */
+#define LP_NO_REVERSE  0x0400 /* No reverse mode available. */
+#define LP_DATA_AVAIL  0x0800 /* Data is available. */
+
+/* 
+ * bit defines for 8255 status port
+ * base + 1
+ * accessed with LP_S(minor), which gets the byte...
+ */
+#define LP_PBUSY	0x80  /* inverted input, active high */
+#define LP_PACK		0x40  /* unchanged input, active low */
+#define LP_POUTPA	0x20  /* unchanged input, active high */
+#define LP_PSELECD	0x10  /* unchanged input, active high */
+#define LP_PERRORP	0x08  /* unchanged input, active low */
+
+/* timeout for each character.  This is relative to bus cycles -- it
+ * is the count in a busy loop.  THIS IS THE VALUE TO CHANGE if you
+ * have extremely slow printing, or if the machine seems to slow down
+ * a lot when you print.  If you have slow printing, increase this
+ * number and recompile, and if your system gets bogged down, decrease
+ * this number.  This can be changed with the tunelp(8) command as well.
+ */
+
+#define LP_INIT_CHAR 1000
+
+/* The parallel port specs apparently say that there needs to be
+ * a .5usec wait before and after the strobe.
+ */
+
+#define LP_INIT_WAIT 1
+
+/* This is the amount of time that the driver waits for the printer to
+ * catch up when the printer's buffer appears to be filled.  If you
+ * want to tune this and have a fast printer (i.e. HPIIIP), decrease
+ * this number, and if you have a slow printer, increase this number.
+ * This is in hundredths of a second, the default 2 being .05 second.
+ * Or use the tunelp(8) command, which is especially nice if you want
+ * change back and forth between character and graphics printing, which
+ * are wildly different...
+ */
+
+#define LP_INIT_TIME 2
+
+/* IOCTL numbers */
+#define LPCHAR   0x0601  /* corresponds to LP_INIT_CHAR */
+#define LPTIME   0x0602  /* corresponds to LP_INIT_TIME */
+#define LPABORT  0x0604  /* call with TRUE arg to abort on error,
+			    FALSE to retry.  Default is retry.  */
+#define LPSETIRQ 0x0605  /* call with new IRQ number,
+			    or 0 for polling (no IRQ) */
+#define LPGETIRQ 0x0606  /* get the current IRQ number */
+#define LPWAIT   0x0608  /* corresponds to LP_INIT_WAIT */
+/* NOTE: LPCAREFUL is obsoleted and it' s always the default right now -arca */
+#define LPCAREFUL   0x0609  /* call with TRUE arg to require out-of-paper, off-
+			    line, and error indicators good on all writes,
+			    FALSE to ignore them.  Default is ignore. */
+#define LPABORTOPEN 0x060a  /* call with TRUE arg to abort open() on error,
+			    FALSE to ignore error.  Default is ignore.  */
+#define LPGETSTATUS 0x060b  /* return LP_S(minor) */
+#define LPRESET     0x060c  /* reset printer */
+#ifdef LP_STATS
+#define LPGETSTATS  0x060d  /* get statistics (struct lp_stats) */
+#endif
+#define LPGETFLAGS  0x060e  /* get status flags */
+#define LPSETTIMEOUT 0x060f /* set parport timeout */
+
+/* timeout for printk'ing a timeout, in jiffies (100ths of a second).
+   This is also used for re-checking error conditions if LP_ABORT is
+   not set.  This is the default behavior. */
+
+#define LP_TIMEOUT_INTERRUPT	(60 * HZ)
+#define LP_TIMEOUT_POLLED	(10 * HZ)
+
+
+#endif /* _UAPI_LINUX_LP_H */
diff --git a/include/linux/magic.h b/include/uapi/linux/magic.h
similarity index 100%
rename from include/linux/magic.h
rename to include/uapi/linux/magic.h
diff --git a/include/linux/major.h b/include/uapi/linux/major.h
similarity index 100%
rename from include/linux/major.h
rename to include/uapi/linux/major.h
diff --git a/include/linux/map_to_7segment.h b/include/uapi/linux/map_to_7segment.h
similarity index 100%
rename from include/linux/map_to_7segment.h
rename to include/uapi/linux/map_to_7segment.h
diff --git a/include/linux/matroxfb.h b/include/uapi/linux/matroxfb.h
similarity index 100%
rename from include/linux/matroxfb.h
rename to include/uapi/linux/matroxfb.h
diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
new file mode 100644
index 0000000..c94a510
--- /dev/null
+++ b/include/uapi/linux/mdio.h
@@ -0,0 +1,297 @@
+/*
+ * linux/mdio.h: definitions for MDIO (clause 45) transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef _UAPI__LINUX_MDIO_H__
+#define _UAPI__LINUX_MDIO_H__
+
+#include <linux/types.h>
+#include <linux/mii.h>
+
+/* MDIO Manageable Devices (MMDs). */
+#define MDIO_MMD_PMAPMD		1	/* Physical Medium Attachment/
+					 * Physical Medium Dependent */
+#define MDIO_MMD_WIS		2	/* WAN Interface Sublayer */
+#define MDIO_MMD_PCS		3	/* Physical Coding Sublayer */
+#define MDIO_MMD_PHYXS		4	/* PHY Extender Sublayer */
+#define MDIO_MMD_DTEXS		5	/* DTE Extender Sublayer */
+#define MDIO_MMD_TC		6	/* Transmission Convergence */
+#define MDIO_MMD_AN		7	/* Auto-Negotiation */
+#define MDIO_MMD_C22EXT		29	/* Clause 22 extension */
+#define MDIO_MMD_VEND1		30	/* Vendor specific 1 */
+#define MDIO_MMD_VEND2		31	/* Vendor specific 2 */
+
+/* Generic MDIO registers. */
+#define MDIO_CTRL1		MII_BMCR
+#define MDIO_STAT1		MII_BMSR
+#define MDIO_DEVID1		MII_PHYSID1
+#define MDIO_DEVID2		MII_PHYSID2
+#define MDIO_SPEED		4	/* Speed ability */
+#define MDIO_DEVS1		5	/* Devices in package */
+#define MDIO_DEVS2		6
+#define MDIO_CTRL2		7	/* 10G control 2 */
+#define MDIO_STAT2		8	/* 10G status 2 */
+#define MDIO_PMA_TXDIS		9	/* 10G PMA/PMD transmit disable */
+#define MDIO_PMA_RXDET		10	/* 10G PMA/PMD receive signal detect */
+#define MDIO_PMA_EXTABLE	11	/* 10G PMA/PMD extended ability */
+#define MDIO_PKGID1		14	/* Package identifier */
+#define MDIO_PKGID2		15
+#define MDIO_AN_ADVERTISE	16	/* AN advertising (base page) */
+#define MDIO_AN_LPA		19	/* AN LP abilities (base page) */
+#define MDIO_PCS_EEE_ABLE	20	/* EEE Capability register */
+#define MDIO_PCS_EEE_WK_ERR	22	/* EEE wake error counter */
+#define MDIO_PHYXS_LNSTAT	24	/* PHY XGXS lane state */
+#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
+#define MDIO_AN_EEE_LPABLE	61	/* EEE link partner ability */
+
+/* Media-dependent registers. */
+#define MDIO_PMA_10GBT_SWAPPOL	130	/* 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_TXPWR	131	/* 10GBASE-T TX power control */
+#define MDIO_PMA_10GBT_SNR	133	/* 10GBASE-T SNR margin, lane A.
+					 * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FECABLE	170	/* 10GBASE-R FEC ability */
+#define MDIO_PCS_10GBX_STAT1	24	/* 10GBASE-X PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT1	32	/* 10GBASE-R/-T PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
+#define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
+#define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
+
+/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
+#define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
+#define MDIO_PMA_LASI_TXCTRL	0x9001	/* TX_ALARM control */
+#define MDIO_PMA_LASI_CTRL	0x9002	/* LASI control */
+#define MDIO_PMA_LASI_RXSTAT	0x9003	/* RX_ALARM status */
+#define MDIO_PMA_LASI_TXSTAT	0x9004	/* TX_ALARM status */
+#define MDIO_PMA_LASI_STAT	0x9005	/* LASI status */
+
+/* Control register 1. */
+/* Enable extended speed selection */
+#define MDIO_CTRL1_SPEEDSELEXT		(BMCR_SPEED1000 | BMCR_SPEED100)
+/* All speed selection bits */
+#define MDIO_CTRL1_SPEEDSEL		(MDIO_CTRL1_SPEEDSELEXT | 0x003c)
+#define MDIO_CTRL1_FULLDPLX		BMCR_FULLDPLX
+#define MDIO_CTRL1_LPOWER		BMCR_PDOWN
+#define MDIO_CTRL1_RESET		BMCR_RESET
+#define MDIO_PMA_CTRL1_LOOPBACK		0x0001
+#define MDIO_PMA_CTRL1_SPEED1000	BMCR_SPEED1000
+#define MDIO_PMA_CTRL1_SPEED100		BMCR_SPEED100
+#define MDIO_PCS_CTRL1_LOOPBACK		BMCR_LOOPBACK
+#define MDIO_PHYXS_CTRL1_LOOPBACK	BMCR_LOOPBACK
+#define MDIO_AN_CTRL1_RESTART		BMCR_ANRESTART
+#define MDIO_AN_CTRL1_ENABLE		BMCR_ANENABLE
+#define MDIO_AN_CTRL1_XNP		0x2000	/* Enable extended next page */
+#define MDIO_PCS_CTRL1_CLKSTOP_EN	0x400	/* Stop the clock during LPI */
+
+/* 10 Gb/s */
+#define MDIO_CTRL1_SPEED10G		(MDIO_CTRL1_SPEEDSELEXT | 0x00)
+/* 10PASS-TS/2BASE-TL */
+#define MDIO_CTRL1_SPEED10P2B		(MDIO_CTRL1_SPEEDSELEXT | 0x04)
+
+/* Status register 1. */
+#define MDIO_STAT1_LPOWERABLE		0x0002	/* Low-power ability */
+#define MDIO_STAT1_LSTATUS		BMSR_LSTATUS
+#define MDIO_STAT1_FAULT		0x0080	/* Fault */
+#define MDIO_AN_STAT1_LPABLE		0x0001	/* Link partner AN ability */
+#define MDIO_AN_STAT1_ABLE		BMSR_ANEGCAPABLE
+#define MDIO_AN_STAT1_RFAULT		BMSR_RFAULT
+#define MDIO_AN_STAT1_COMPLETE		BMSR_ANEGCOMPLETE
+#define MDIO_AN_STAT1_PAGE		0x0040	/* Page received */
+#define MDIO_AN_STAT1_XNP		0x0080	/* Extended next page status */
+
+/* Speed register. */
+#define MDIO_SPEED_10G			0x0001	/* 10G capable */
+#define MDIO_PMA_SPEED_2B		0x0002	/* 2BASE-TL capable */
+#define MDIO_PMA_SPEED_10P		0x0004	/* 10PASS-TS capable */
+#define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
+#define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
+#define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
+#define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
+
+/* Device present registers. */
+#define MDIO_DEVS_PRESENT(devad)	(1 << (devad))
+#define MDIO_DEVS_PMAPMD		MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
+#define MDIO_DEVS_WIS			MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
+#define MDIO_DEVS_PCS			MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
+#define MDIO_DEVS_PHYXS			MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
+#define MDIO_DEVS_DTEXS			MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
+#define MDIO_DEVS_TC			MDIO_DEVS_PRESENT(MDIO_MMD_TC)
+#define MDIO_DEVS_AN			MDIO_DEVS_PRESENT(MDIO_MMD_AN)
+#define MDIO_DEVS_C22EXT		MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
+
+/* Control register 2. */
+#define MDIO_PMA_CTRL2_TYPE		0x000f	/* PMA/PMD type selection */
+#define MDIO_PMA_CTRL2_10GBCX4		0x0000	/* 10GBASE-CX4 type */
+#define MDIO_PMA_CTRL2_10GBEW		0x0001	/* 10GBASE-EW type */
+#define MDIO_PMA_CTRL2_10GBLW		0x0002	/* 10GBASE-LW type */
+#define MDIO_PMA_CTRL2_10GBSW		0x0003	/* 10GBASE-SW type */
+#define MDIO_PMA_CTRL2_10GBLX4		0x0004	/* 10GBASE-LX4 type */
+#define MDIO_PMA_CTRL2_10GBER		0x0005	/* 10GBASE-ER type */
+#define MDIO_PMA_CTRL2_10GBLR		0x0006	/* 10GBASE-LR type */
+#define MDIO_PMA_CTRL2_10GBSR		0x0007	/* 10GBASE-SR type */
+#define MDIO_PMA_CTRL2_10GBLRM		0x0008	/* 10GBASE-LRM type */
+#define MDIO_PMA_CTRL2_10GBT		0x0009	/* 10GBASE-T type */
+#define MDIO_PMA_CTRL2_10GBKX4		0x000a	/* 10GBASE-KX4 type */
+#define MDIO_PMA_CTRL2_10GBKR		0x000b	/* 10GBASE-KR type */
+#define MDIO_PMA_CTRL2_1000BT		0x000c	/* 1000BASE-T type */
+#define MDIO_PMA_CTRL2_1000BKX		0x000d	/* 1000BASE-KX type */
+#define MDIO_PMA_CTRL2_100BTX		0x000e	/* 100BASE-TX type */
+#define MDIO_PMA_CTRL2_10BT		0x000f	/* 10BASE-T type */
+#define MDIO_PCS_CTRL2_TYPE		0x0003	/* PCS type selection */
+#define MDIO_PCS_CTRL2_10GBR		0x0000	/* 10GBASE-R type */
+#define MDIO_PCS_CTRL2_10GBX		0x0001	/* 10GBASE-X type */
+#define MDIO_PCS_CTRL2_10GBW		0x0002	/* 10GBASE-W type */
+#define MDIO_PCS_CTRL2_10GBT		0x0003	/* 10GBASE-T type */
+
+/* Status register 2. */
+#define MDIO_STAT2_RXFAULT		0x0400	/* Receive fault */
+#define MDIO_STAT2_TXFAULT		0x0800	/* Transmit fault */
+#define MDIO_STAT2_DEVPRST		0xc000	/* Device present */
+#define MDIO_STAT2_DEVPRST_VAL		0x8000	/* Device present value */
+#define MDIO_PMA_STAT2_LBABLE		0x0001	/* PMA loopback ability */
+#define MDIO_PMA_STAT2_10GBEW		0x0002	/* 10GBASE-EW ability */
+#define MDIO_PMA_STAT2_10GBLW		0x0004	/* 10GBASE-LW ability */
+#define MDIO_PMA_STAT2_10GBSW		0x0008	/* 10GBASE-SW ability */
+#define MDIO_PMA_STAT2_10GBLX4		0x0010	/* 10GBASE-LX4 ability */
+#define MDIO_PMA_STAT2_10GBER		0x0020	/* 10GBASE-ER ability */
+#define MDIO_PMA_STAT2_10GBLR		0x0040	/* 10GBASE-LR ability */
+#define MDIO_PMA_STAT2_10GBSR		0x0080	/* 10GBASE-SR ability */
+#define MDIO_PMD_STAT2_TXDISAB		0x0100	/* PMD TX disable ability */
+#define MDIO_PMA_STAT2_EXTABLE		0x0200	/* Extended abilities */
+#define MDIO_PMA_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PMA_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+#define MDIO_PCS_STAT2_10GBR		0x0001	/* 10GBASE-R capable */
+#define MDIO_PCS_STAT2_10GBX		0x0002	/* 10GBASE-X capable */
+#define MDIO_PCS_STAT2_10GBW		0x0004	/* 10GBASE-W capable */
+#define MDIO_PCS_STAT2_RXFLTABLE	0x1000	/* Receive fault ability */
+#define MDIO_PCS_STAT2_TXFLTABLE	0x2000	/* Transmit fault ability */
+
+/* Transmit disable register. */
+#define MDIO_PMD_TXDIS_GLOBAL		0x0001	/* Global PMD TX disable */
+#define MDIO_PMD_TXDIS_0		0x0002	/* PMD TX disable 0 */
+#define MDIO_PMD_TXDIS_1		0x0004	/* PMD TX disable 1 */
+#define MDIO_PMD_TXDIS_2		0x0008	/* PMD TX disable 2 */
+#define MDIO_PMD_TXDIS_3		0x0010	/* PMD TX disable 3 */
+
+/* Receive signal detect register. */
+#define MDIO_PMD_RXDET_GLOBAL		0x0001	/* Global PMD RX signal detect */
+#define MDIO_PMD_RXDET_0		0x0002	/* PMD RX signal detect 0 */
+#define MDIO_PMD_RXDET_1		0x0004	/* PMD RX signal detect 1 */
+#define MDIO_PMD_RXDET_2		0x0008	/* PMD RX signal detect 2 */
+#define MDIO_PMD_RXDET_3		0x0010	/* PMD RX signal detect 3 */
+
+/* Extended abilities register. */
+#define MDIO_PMA_EXTABLE_10GCX4		0x0001	/* 10GBASE-CX4 ability */
+#define MDIO_PMA_EXTABLE_10GBLRM	0x0002	/* 10GBASE-LRM ability */
+#define MDIO_PMA_EXTABLE_10GBT		0x0004	/* 10GBASE-T ability */
+#define MDIO_PMA_EXTABLE_10GBKX4	0x0008	/* 10GBASE-KX4 ability */
+#define MDIO_PMA_EXTABLE_10GBKR		0x0010	/* 10GBASE-KR ability */
+#define MDIO_PMA_EXTABLE_1000BT		0x0020	/* 1000BASE-T ability */
+#define MDIO_PMA_EXTABLE_1000BKX	0x0040	/* 1000BASE-KX ability */
+#define MDIO_PMA_EXTABLE_100BTX		0x0080	/* 100BASE-TX ability */
+#define MDIO_PMA_EXTABLE_10BT		0x0100	/* 10BASE-T ability */
+
+/* PHY XGXS lane state register. */
+#define MDIO_PHYXS_LNSTAT_SYNC0		0x0001
+#define MDIO_PHYXS_LNSTAT_SYNC1		0x0002
+#define MDIO_PHYXS_LNSTAT_SYNC2		0x0004
+#define MDIO_PHYXS_LNSTAT_SYNC3		0x0008
+#define MDIO_PHYXS_LNSTAT_ALIGN		0x1000
+
+/* PMA 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_SWAPPOL_ABNX	0x0001	/* Pair A/B uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_CDNX	0x0002	/* Pair C/D uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_AREV	0x0100	/* Pair A polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_BREV	0x0200	/* Pair B polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_CREV	0x0400	/* Pair C polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_DREV	0x0800	/* Pair D polarity reversed */
+
+/* PMA 10GBASE-T TX power register. */
+#define MDIO_PMA_10GBT_TXPWR_SHORT	0x0001	/* Short-reach mode */
+
+/* PMA 10GBASE-T SNR registers. */
+/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
+#define MDIO_PMA_10GBT_SNR_BIAS		0x8000
+#define MDIO_PMA_10GBT_SNR_MAX		127
+
+/* PMA 10GBASE-R FEC ability register. */
+#define MDIO_PMA_10GBR_FECABLE_ABLE	0x0001	/* FEC ability */
+#define MDIO_PMA_10GBR_FECABLE_ERRABLE	0x0002	/* FEC error indic. ability */
+
+/* PCS 10GBASE-R/-T status register 1. */
+#define MDIO_PCS_10GBRT_STAT1_BLKLK	0x0001	/* Block lock attained */
+
+/* PCS 10GBASE-R/-T status register 2. */
+#define MDIO_PCS_10GBRT_STAT2_ERR	0x00ff
+#define MDIO_PCS_10GBRT_STAT2_BER	0x3f00
+
+/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV10G	0x1000	/* Advertise 10GBASE-T */
+
+/* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LPTRR	0x0200	/* LP training reset req. */
+#define MDIO_AN_10GBT_STAT_LPLTABLE	0x0400	/* LP loop timing ability */
+#define MDIO_AN_10GBT_STAT_LP10G	0x0800	/* LP is 10GBT capable */
+#define MDIO_AN_10GBT_STAT_REMOK	0x1000	/* Remote OK */
+#define MDIO_AN_10GBT_STAT_LOCOK	0x2000	/* Local OK */
+#define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
+#define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
+
+/* EEE Supported/Advertisement/LP Advertisement registers.
+ *
+ * EEE capability Register (3.20), Advertisement (7.60) and
+ * Link partner ability (7.61) registers have and can use the same identical
+ * bit masks.
+ */
+#define MDIO_AN_EEE_ADV_100TX	0x0002	/* Advertise 100TX EEE cap */
+#define MDIO_AN_EEE_ADV_1000T	0x0004	/* Advertise 1000T EEE cap */
+/* Note: the two defines above can be potentially used by the user-land
+ * and cannot remove them now.
+ * So, we define the new generic MDIO_EEE_100TX and MDIO_EEE_1000T macros
+ * using the previous ones (that can be considered obsolete).
+ */
+#define MDIO_EEE_100TX		MDIO_AN_EEE_ADV_100TX	/* 100TX EEE cap */
+#define MDIO_EEE_1000T		MDIO_AN_EEE_ADV_1000T	/* 1000T EEE cap */
+#define MDIO_EEE_10GT		0x0008	/* 10GT EEE cap */
+#define MDIO_EEE_1000KX		0x0010	/* 1000KX EEE cap */
+#define MDIO_EEE_10GKX4		0x0020	/* 10G KX4 EEE cap */
+#define MDIO_EEE_10GKR		0x0040	/* 10G KR EEE cap */
+
+/* LASI RX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
+#define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
+#define MDIO_PMA_LASI_RX_PMALFLT	0x0010	/* PMA/PMD RX local fault */
+#define MDIO_PMA_LASI_RX_OPTICPOWERFLT	0x0020	/* RX optical power fault */
+#define MDIO_PMA_LASI_RX_WISLFLT	0x0200	/* WIS local fault */
+
+/* LASI TX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_TX_PHYXSLFLT	0x0001	/* PHY XS TX local fault */
+#define MDIO_PMA_LASI_TX_PCSLFLT	0x0008	/* PCS TX local fault */
+#define MDIO_PMA_LASI_TX_PMALFLT	0x0010	/* PMA/PMD TX local fault */
+#define MDIO_PMA_LASI_TX_LASERPOWERFLT	0x0080	/* Laser output power fault */
+#define MDIO_PMA_LASI_TX_LASERTEMPFLT	0x0100	/* Laser temperature fault */
+#define MDIO_PMA_LASI_TX_LASERBICURRFLT	0x0200	/* Laser bias current fault */
+
+/* LASI control/status registers. */
+#define MDIO_PMA_LASI_LSALARM		0x0001	/* LS_ALARM enable/status */
+#define MDIO_PMA_LASI_TXALARM		0x0002	/* TX_ALARM enable/status */
+#define MDIO_PMA_LASI_RXALARM		0x0004	/* RX_ALARM enable/status */
+
+/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
+
+#define MDIO_PHY_ID_C45			0x8000
+#define MDIO_PHY_ID_PRTAD		0x03e0
+#define MDIO_PHY_ID_DEVAD		0x001f
+#define MDIO_PHY_ID_C45_MASK						\
+	(MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
+
+static inline __u16 mdio_phy_id_c45(int prtad, int devad)
+{
+	return MDIO_PHY_ID_C45 | (prtad << 5) | devad;
+}
+
+#endif /* _UAPI__LINUX_MDIO_H__ */
diff --git a/include/linux/media.h b/include/uapi/linux/media.h
similarity index 100%
rename from include/linux/media.h
rename to include/uapi/linux/media.h
diff --git a/include/linux/mei.h b/include/uapi/linux/mei.h
similarity index 100%
rename from include/linux/mei.h
rename to include/uapi/linux/mei.h
diff --git a/include/uapi/linux/mempolicy.h b/include/uapi/linux/mempolicy.h
new file mode 100644
index 0000000..23e62e0
--- /dev/null
+++ b/include/uapi/linux/mempolicy.h
@@ -0,0 +1,64 @@
+/*
+ * NUMA memory policies for Linux.
+ * Copyright 2003,2004 Andi Kleen SuSE Labs
+ */
+#ifndef _UAPI_LINUX_MEMPOLICY_H
+#define _UAPI_LINUX_MEMPOLICY_H
+
+#include <linux/errno.h>
+
+
+/*
+ * Both the MPOL_* mempolicy mode and the MPOL_F_* optional mode flags are
+ * passed by the user to either set_mempolicy() or mbind() in an 'int' actual.
+ * The MPOL_MODE_FLAGS macro determines the legal set of optional mode flags.
+ */
+
+/* Policies */
+enum {
+	MPOL_DEFAULT,
+	MPOL_PREFERRED,
+	MPOL_BIND,
+	MPOL_INTERLEAVE,
+	MPOL_MAX,	/* always last member of enum */
+};
+
+enum mpol_rebind_step {
+	MPOL_REBIND_ONCE,	/* do rebind work at once(not by two step) */
+	MPOL_REBIND_STEP1,	/* first step(set all the newly nodes) */
+	MPOL_REBIND_STEP2,	/* second step(clean all the disallowed nodes)*/
+	MPOL_REBIND_NSTEP,
+};
+
+/* Flags for set_mempolicy */
+#define MPOL_F_STATIC_NODES	(1 << 15)
+#define MPOL_F_RELATIVE_NODES	(1 << 14)
+
+/*
+ * MPOL_MODE_FLAGS is the union of all possible optional mode flags passed to
+ * either set_mempolicy() or mbind().
+ */
+#define MPOL_MODE_FLAGS	(MPOL_F_STATIC_NODES | MPOL_F_RELATIVE_NODES)
+
+/* Flags for get_mempolicy */
+#define MPOL_F_NODE	(1<<0)	/* return next IL mode instead of node mask */
+#define MPOL_F_ADDR	(1<<1)	/* look up vma using address */
+#define MPOL_F_MEMS_ALLOWED (1<<2) /* return allowed memories */
+
+/* Flags for mbind */
+#define MPOL_MF_STRICT	(1<<0)	/* Verify existing pages in the mapping */
+#define MPOL_MF_MOVE	(1<<1)	/* Move pages owned by this process to conform to mapping */
+#define MPOL_MF_MOVE_ALL (1<<2)	/* Move every page to conform to mapping */
+#define MPOL_MF_INTERNAL (1<<3)	/* Internal flags start here */
+
+/*
+ * Internal flags that share the struct mempolicy flags word with
+ * "mode flags".  These flags are allocated from bit 0 up, as they
+ * are never OR'ed into the mode in mempolicy API arguments.
+ */
+#define MPOL_F_SHARED  (1 << 0)	/* identify shared policies */
+#define MPOL_F_LOCAL   (1 << 1)	/* preferred local allocation */
+#define MPOL_F_REBINDING (1 << 2)	/* identify policies in rebinding */
+
+
+#endif /* _UAPI_LINUX_MEMPOLICY_H */
diff --git a/include/linux/meye.h b/include/uapi/linux/meye.h
similarity index 100%
rename from include/linux/meye.h
rename to include/uapi/linux/meye.h
diff --git a/include/uapi/linux/mii.h b/include/uapi/linux/mii.h
new file mode 100644
index 0000000..237fac4
--- /dev/null
+++ b/include/uapi/linux/mii.h
@@ -0,0 +1,161 @@
+/*
+ * linux/mii.h: definitions for MII-compatible transceivers
+ * Originally drivers/net/sunhme.h.
+ *
+ * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _UAPI__LINUX_MII_H__
+#define _UAPI__LINUX_MII_H__
+
+#include <linux/types.h>
+#include <linux/ethtool.h>
+
+/* Generic MII registers. */
+#define MII_BMCR		0x00	/* Basic mode control register */
+#define MII_BMSR		0x01	/* Basic mode status register  */
+#define MII_PHYSID1		0x02	/* PHYS ID 1                   */
+#define MII_PHYSID2		0x03	/* PHYS ID 2                   */
+#define MII_ADVERTISE		0x04	/* Advertisement control reg   */
+#define MII_LPA			0x05	/* Link partner ability reg    */
+#define MII_EXPANSION		0x06	/* Expansion register          */
+#define MII_CTRL1000		0x09	/* 1000BASE-T control          */
+#define MII_STAT1000		0x0a	/* 1000BASE-T status           */
+#define	MII_MMD_CTRL		0x0d	/* MMD Access Control Register */
+#define	MII_MMD_DATA		0x0e	/* MMD Access Data Register */
+#define MII_ESTATUS		0x0f	/* Extended Status             */
+#define MII_DCOUNTER		0x12	/* Disconnect counter          */
+#define MII_FCSCOUNTER		0x13	/* False carrier counter       */
+#define MII_NWAYTEST		0x14	/* N-way auto-neg test reg     */
+#define MII_RERRCOUNTER		0x15	/* Receive error counter       */
+#define MII_SREVISION		0x16	/* Silicon revision            */
+#define MII_RESV1		0x17	/* Reserved...                 */
+#define MII_LBRERROR		0x18	/* Lpback, rx, bypass error    */
+#define MII_PHYADDR		0x19	/* PHY address                 */
+#define MII_RESV2		0x1a	/* Reserved...                 */
+#define MII_TPISTATUS		0x1b	/* TPI status for 10mbps       */
+#define MII_NCONFIG		0x1c	/* Network interface config    */
+
+/* Basic mode control register. */
+#define BMCR_RESV		0x003f	/* Unused...                   */
+#define BMCR_SPEED1000		0x0040	/* MSB of Speed (1000)         */
+#define BMCR_CTST		0x0080	/* Collision test              */
+#define BMCR_FULLDPLX		0x0100	/* Full duplex                 */
+#define BMCR_ANRESTART		0x0200	/* Auto negotiation restart    */
+#define BMCR_ISOLATE		0x0400	/* Isolate data paths from MII */
+#define BMCR_PDOWN		0x0800	/* Enable low power state      */
+#define BMCR_ANENABLE		0x1000	/* Enable auto negotiation     */
+#define BMCR_SPEED100		0x2000	/* Select 100Mbps              */
+#define BMCR_LOOPBACK		0x4000	/* TXD loopback bits           */
+#define BMCR_RESET		0x8000	/* Reset to default state      */
+
+/* Basic mode status register. */
+#define BMSR_ERCAP		0x0001	/* Ext-reg capability          */
+#define BMSR_JCD		0x0002	/* Jabber detected             */
+#define BMSR_LSTATUS		0x0004	/* Link status                 */
+#define BMSR_ANEGCAPABLE	0x0008	/* Able to do auto-negotiation */
+#define BMSR_RFAULT		0x0010	/* Remote fault detected       */
+#define BMSR_ANEGCOMPLETE	0x0020	/* Auto-negotiation complete   */
+#define BMSR_RESV		0x00c0	/* Unused...                   */
+#define BMSR_ESTATEN		0x0100	/* Extended Status in R15      */
+#define BMSR_100HALF2		0x0200	/* Can do 100BASE-T2 HDX       */
+#define BMSR_100FULL2		0x0400	/* Can do 100BASE-T2 FDX       */
+#define BMSR_10HALF		0x0800	/* Can do 10mbps, half-duplex  */
+#define BMSR_10FULL		0x1000	/* Can do 10mbps, full-duplex  */
+#define BMSR_100HALF		0x2000	/* Can do 100mbps, half-duplex */
+#define BMSR_100FULL		0x4000	/* Can do 100mbps, full-duplex */
+#define BMSR_100BASE4		0x8000	/* Can do 100mbps, 4k packets  */
+
+/* Advertisement control register. */
+#define ADVERTISE_SLCT		0x001f	/* Selector bits               */
+#define ADVERTISE_CSMA		0x0001	/* Only selector supported     */
+#define ADVERTISE_10HALF	0x0020	/* Try for 10mbps half-duplex  */
+#define ADVERTISE_1000XFULL	0x0020	/* Try for 1000BASE-X full-duplex */
+#define ADVERTISE_10FULL	0x0040	/* Try for 10mbps full-duplex  */
+#define ADVERTISE_1000XHALF	0x0040	/* Try for 1000BASE-X half-duplex */
+#define ADVERTISE_100HALF	0x0080	/* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE	0x0080	/* Try for 1000BASE-X pause    */
+#define ADVERTISE_100FULL	0x0100	/* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM	0x0100	/* Try for 1000BASE-X asym pause */
+#define ADVERTISE_100BASE4	0x0200	/* Try for 100mbps 4k packets  */
+#define ADVERTISE_PAUSE_CAP	0x0400	/* Try for pause               */
+#define ADVERTISE_PAUSE_ASYM	0x0800	/* Try for asymetric pause     */
+#define ADVERTISE_RESV		0x1000	/* Unused...                   */
+#define ADVERTISE_RFAULT	0x2000	/* Say we can detect faults    */
+#define ADVERTISE_LPACK		0x4000	/* Ack link partners response  */
+#define ADVERTISE_NPAGE		0x8000	/* Next page bit               */
+
+#define ADVERTISE_FULL		(ADVERTISE_100FULL | ADVERTISE_10FULL | \
+				  ADVERTISE_CSMA)
+#define ADVERTISE_ALL		(ADVERTISE_10HALF | ADVERTISE_10FULL | \
+				  ADVERTISE_100HALF | ADVERTISE_100FULL)
+
+/* Link partner ability register. */
+#define LPA_SLCT		0x001f	/* Same as advertise selector  */
+#define LPA_10HALF		0x0020	/* Can do 10mbps half-duplex   */
+#define LPA_1000XFULL		0x0020	/* Can do 1000BASE-X full-duplex */
+#define LPA_10FULL		0x0040	/* Can do 10mbps full-duplex   */
+#define LPA_1000XHALF		0x0040	/* Can do 1000BASE-X half-duplex */
+#define LPA_100HALF		0x0080	/* Can do 100mbps half-duplex  */
+#define LPA_1000XPAUSE		0x0080	/* Can do 1000BASE-X pause     */
+#define LPA_100FULL		0x0100	/* Can do 100mbps full-duplex  */
+#define LPA_1000XPAUSE_ASYM	0x0100	/* Can do 1000BASE-X pause asym*/
+#define LPA_100BASE4		0x0200	/* Can do 100mbps 4k packets   */
+#define LPA_PAUSE_CAP		0x0400	/* Can pause                   */
+#define LPA_PAUSE_ASYM		0x0800	/* Can pause asymetrically     */
+#define LPA_RESV		0x1000	/* Unused...                   */
+#define LPA_RFAULT		0x2000	/* Link partner faulted        */
+#define LPA_LPACK		0x4000	/* Link partner acked us       */
+#define LPA_NPAGE		0x8000	/* Next page bit               */
+
+#define LPA_DUPLEX		(LPA_10FULL | LPA_100FULL)
+#define LPA_100			(LPA_100FULL | LPA_100HALF | LPA_100BASE4)
+
+/* Expansion register for auto-negotiation. */
+#define EXPANSION_NWAY		0x0001	/* Can do N-way auto-nego      */
+#define EXPANSION_LCWP		0x0002	/* Got new RX page code word   */
+#define EXPANSION_ENABLENPAGE	0x0004	/* This enables npage words    */
+#define EXPANSION_NPCAPABLE	0x0008	/* Link partner supports npage */
+#define EXPANSION_MFAULTS	0x0010	/* Multiple faults detected    */
+#define EXPANSION_RESV		0xffe0	/* Unused...                   */
+
+#define ESTATUS_1000_TFULL	0x2000	/* Can do 1000BT Full          */
+#define ESTATUS_1000_THALF	0x1000	/* Can do 1000BT Half          */
+
+/* N-way test register. */
+#define NWAYTEST_RESV1		0x00ff	/* Unused...                   */
+#define NWAYTEST_LOOPBACK	0x0100	/* Enable loopback for N-way   */
+#define NWAYTEST_RESV2		0xfe00	/* Unused...                   */
+
+/* 1000BASE-T Control register */
+#define ADVERTISE_1000FULL	0x0200  /* Advertise 1000BASE-T full duplex */
+#define ADVERTISE_1000HALF	0x0100  /* Advertise 1000BASE-T half duplex */
+#define CTL1000_AS_MASTER	0x0800
+#define CTL1000_ENABLE_MASTER	0x1000
+
+/* 1000BASE-T Status register */
+#define LPA_1000LOCALRXOK	0x2000	/* Link partner local receiver status */
+#define LPA_1000REMRXOK		0x1000	/* Link partner remote receiver status */
+#define LPA_1000FULL		0x0800	/* Link partner 1000BASE-T full duplex */
+#define LPA_1000HALF		0x0400	/* Link partner 1000BASE-T half duplex */
+
+/* Flow control flags */
+#define FLOW_CTRL_TX		0x01
+#define FLOW_CTRL_RX		0x02
+
+/* MMD Access Control register fields */
+#define MII_MMD_CTRL_DEVAD_MASK	0x1f	/* Mask MMD DEVAD*/
+#define MII_MMD_CTRL_ADDR	0x0000	/* Address */
+#define MII_MMD_CTRL_NOINCR	0x4000	/* no post increment */
+#define MII_MMD_CTRL_INCR_RDWT	0x8000	/* post increment on reads & writes */
+#define MII_MMD_CTRL_INCR_ON_WT	0xC000	/* post increment on writes only */
+
+/* This structure is used in all SIOCxMIIxxx ioctl calls */
+struct mii_ioctl_data {
+	__u16		phy_id;
+	__u16		reg_num;
+	__u16		val_in;
+	__u16		val_out;
+};
+
+#endif /* _UAPI__LINUX_MII_H__ */
diff --git a/include/linux/minix_fs.h b/include/uapi/linux/minix_fs.h
similarity index 100%
rename from include/linux/minix_fs.h
rename to include/uapi/linux/minix_fs.h
diff --git a/include/uapi/linux/mman.h b/include/uapi/linux/mman.h
new file mode 100644
index 0000000..ade4acd
--- /dev/null
+++ b/include/uapi/linux/mman.h
@@ -0,0 +1,13 @@
+#ifndef _UAPI_LINUX_MMAN_H
+#define _UAPI_LINUX_MMAN_H
+
+#include <asm/mman.h>
+
+#define MREMAP_MAYMOVE	1
+#define MREMAP_FIXED	2
+
+#define OVERCOMMIT_GUESS		0
+#define OVERCOMMIT_ALWAYS		1
+#define OVERCOMMIT_NEVER		2
+
+#endif /* _UAPI_LINUX_MMAN_H */
diff --git a/include/uapi/linux/mmc/Kbuild b/include/uapi/linux/mmc/Kbuild
index aafaa5a..8c1d2cb 100644
--- a/include/uapi/linux/mmc/Kbuild
+++ b/include/uapi/linux/mmc/Kbuild
@@ -1 +1,2 @@
 # UAPI Header export list
+header-y += ioctl.h
diff --git a/include/linux/mmc/ioctl.h b/include/uapi/linux/mmc/ioctl.h
similarity index 100%
rename from include/linux/mmc/ioctl.h
rename to include/uapi/linux/mmc/ioctl.h
diff --git a/include/linux/mmtimer.h b/include/uapi/linux/mmtimer.h
similarity index 100%
rename from include/linux/mmtimer.h
rename to include/uapi/linux/mmtimer.h
diff --git a/include/linux/mqueue.h b/include/uapi/linux/mqueue.h
similarity index 100%
rename from include/linux/mqueue.h
rename to include/uapi/linux/mqueue.h
diff --git a/include/uapi/linux/mroute.h b/include/uapi/linux/mroute.h
new file mode 100644
index 0000000..1692999
--- /dev/null
+++ b/include/uapi/linux/mroute.h
@@ -0,0 +1,143 @@
+#ifndef _UAPI__LINUX_MROUTE_H
+#define _UAPI__LINUX_MROUTE_H
+
+#include <linux/sockios.h>
+#include <linux/types.h>
+
+/*
+ *	Based on the MROUTING 3.5 defines primarily to keep
+ *	source compatibility with BSD.
+ *
+ *	See the mrouted code for the original history.
+ *
+ *      Protocol Independent Multicast (PIM) data structures included
+ *      Carlos Picoto (cap@di.fc.ul.pt)
+ *
+ */
+
+#define MRT_BASE	200
+#define MRT_INIT	(MRT_BASE)	/* Activate the kernel mroute code 	*/
+#define MRT_DONE	(MRT_BASE+1)	/* Shutdown the kernel mroute		*/
+#define MRT_ADD_VIF	(MRT_BASE+2)	/* Add a virtual interface		*/
+#define MRT_DEL_VIF	(MRT_BASE+3)	/* Delete a virtual interface		*/
+#define MRT_ADD_MFC	(MRT_BASE+4)	/* Add a multicast forwarding entry	*/
+#define MRT_DEL_MFC	(MRT_BASE+5)	/* Delete a multicast forwarding entry	*/
+#define MRT_VERSION	(MRT_BASE+6)	/* Get the kernel multicast version	*/
+#define MRT_ASSERT	(MRT_BASE+7)	/* Activate PIM assert mode		*/
+#define MRT_PIM		(MRT_BASE+8)	/* enable PIM code			*/
+#define MRT_TABLE	(MRT_BASE+9)	/* Specify mroute table ID		*/
+
+#define SIOCGETVIFCNT	SIOCPROTOPRIVATE	/* IP protocol privates */
+#define SIOCGETSGCNT	(SIOCPROTOPRIVATE+1)
+#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
+
+#define MAXVIFS		32	
+typedef unsigned long vifbitmap_t;	/* User mode code depends on this lot */
+typedef unsigned short vifi_t;
+#define ALL_VIFS	((vifi_t)(-1))
+
+/*
+ *	Same idea as select
+ */
+ 
+#define VIFM_SET(n,m)	((m)|=(1<<(n)))
+#define VIFM_CLR(n,m)	((m)&=~(1<<(n)))
+#define VIFM_ISSET(n,m)	((m)&(1<<(n)))
+#define VIFM_CLRALL(m)	((m)=0)
+#define VIFM_COPY(mfrom,mto)	((mto)=(mfrom))
+#define VIFM_SAME(m1,m2)	((m1)==(m2))
+
+/*
+ *	Passed by mrouted for an MRT_ADD_VIF - again we use the
+ *	mrouted 3.6 structures for compatibility
+ */
+ 
+struct vifctl {
+	vifi_t	vifc_vifi;		/* Index of VIF */
+	unsigned char vifc_flags;	/* VIFF_ flags */
+	unsigned char vifc_threshold;	/* ttl limit */
+	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
+	union {
+		struct in_addr vifc_lcl_addr;     /* Local interface address */
+		int            vifc_lcl_ifindex;  /* Local interface index   */
+	};
+	struct in_addr vifc_rmt_addr;	/* IPIP tunnel addr */
+};
+
+#define VIFF_TUNNEL		0x1	/* IPIP tunnel */
+#define VIFF_SRCRT		0x2	/* NI */
+#define VIFF_REGISTER		0x4	/* register vif	*/
+#define VIFF_USE_IFINDEX	0x8	/* use vifc_lcl_ifindex instead of
+					   vifc_lcl_addr to find an interface */
+
+/*
+ *	Cache manipulation structures for mrouted and PIMd
+ */
+ 
+struct mfcctl {
+	struct in_addr mfcc_origin;		/* Origin of mcast	*/
+	struct in_addr mfcc_mcastgrp;		/* Group in question	*/
+	vifi_t	mfcc_parent;			/* Where it arrived	*/
+	unsigned char mfcc_ttls[MAXVIFS];	/* Where it is going	*/
+	unsigned int mfcc_pkt_cnt;		/* pkt count for src-grp */
+	unsigned int mfcc_byte_cnt;
+	unsigned int mfcc_wrong_if;
+	int	     mfcc_expire;
+};
+
+/* 
+ *	Group count retrieval for mrouted
+ */
+ 
+struct sioc_sg_req {
+	struct in_addr src;
+	struct in_addr grp;
+	unsigned long pktcnt;
+	unsigned long bytecnt;
+	unsigned long wrong_if;
+};
+
+/*
+ *	To get vif packet counts
+ */
+
+struct sioc_vif_req {
+	vifi_t	vifi;		/* Which iface */
+	unsigned long icount;	/* In packets */
+	unsigned long ocount;	/* Out packets */
+	unsigned long ibytes;	/* In bytes */
+	unsigned long obytes;	/* Out bytes */
+};
+
+/*
+ *	This is the format the mroute daemon expects to see IGMP control
+ *	data. Magically happens to be like an IP packet as per the original
+ */
+ 
+struct igmpmsg {
+	__u32 unused1,unused2;
+	unsigned char im_msgtype;		/* What is this */
+	unsigned char im_mbz;			/* Must be zero */
+	unsigned char im_vif;			/* Interface (this ought to be a vifi_t!) */
+	unsigned char unused3;
+	struct in_addr im_src,im_dst;
+};
+
+/*
+ *	That's all usermode folks
+ */
+
+
+
+#define MFC_ASSERT_THRESH (3*HZ)		/* Maximal freq. of asserts */
+
+/*
+ *	Pseudo messages used by mrouted
+ */
+
+#define IGMPMSG_NOCACHE		1		/* Kern cache fill request to mrouted */
+#define IGMPMSG_WRONGVIF	2		/* For PIM assert processing (unused) */
+#define IGMPMSG_WHOLEPKT	3		/* For PIM Register processing */
+
+
+#endif /* _UAPI__LINUX_MROUTE_H */
diff --git a/include/uapi/linux/mroute6.h b/include/uapi/linux/mroute6.h
new file mode 100644
index 0000000..3e89b5e
--- /dev/null
+++ b/include/uapi/linux/mroute6.h
@@ -0,0 +1,137 @@
+#ifndef _UAPI__LINUX_MROUTE6_H
+#define _UAPI__LINUX_MROUTE6_H
+
+#include <linux/types.h>
+#include <linux/sockios.h>
+
+/*
+ *	Based on the MROUTING 3.5 defines primarily to keep
+ *	source compatibility with BSD.
+ *
+ *	See the pim6sd code for the original history.
+ *
+ *      Protocol Independent Multicast (PIM) data structures included
+ *      Carlos Picoto (cap@di.fc.ul.pt)
+ *
+ */
+
+#define MRT6_BASE	200
+#define MRT6_INIT	(MRT6_BASE)	/* Activate the kernel mroute code 	*/
+#define MRT6_DONE	(MRT6_BASE+1)	/* Shutdown the kernel mroute		*/
+#define MRT6_ADD_MIF	(MRT6_BASE+2)	/* Add a virtual interface		*/
+#define MRT6_DEL_MIF	(MRT6_BASE+3)	/* Delete a virtual interface		*/
+#define MRT6_ADD_MFC	(MRT6_BASE+4)	/* Add a multicast forwarding entry	*/
+#define MRT6_DEL_MFC	(MRT6_BASE+5)	/* Delete a multicast forwarding entry	*/
+#define MRT6_VERSION	(MRT6_BASE+6)	/* Get the kernel multicast version	*/
+#define MRT6_ASSERT	(MRT6_BASE+7)	/* Activate PIM assert mode		*/
+#define MRT6_PIM	(MRT6_BASE+8)	/* enable PIM code			*/
+#define MRT6_TABLE	(MRT6_BASE+9)	/* Specify mroute table ID		*/
+
+#define SIOCGETMIFCNT_IN6	SIOCPROTOPRIVATE	/* IP protocol privates */
+#define SIOCGETSGCNT_IN6	(SIOCPROTOPRIVATE+1)
+#define SIOCGETRPF	(SIOCPROTOPRIVATE+2)
+
+#define MAXMIFS		32
+typedef unsigned long mifbitmap_t;	/* User mode code depends on this lot */
+typedef unsigned short mifi_t;
+#define ALL_MIFS	((mifi_t)(-1))
+
+#ifndef IF_SETSIZE
+#define IF_SETSIZE	256
+#endif
+
+typedef	__u32		if_mask;
+#define NIFBITS (sizeof(if_mask) * 8)        /* bits per mask */
+
+#if !defined(__KERNEL__)
+#if !defined(DIV_ROUND_UP)
+#define	DIV_ROUND_UP(x,y)	(((x) + ((y) - 1)) / (y))
+#endif
+#endif
+
+typedef struct if_set {
+	if_mask ifs_bits[DIV_ROUND_UP(IF_SETSIZE, NIFBITS)];
+} if_set;
+
+#define IF_SET(n, p)    ((p)->ifs_bits[(n)/NIFBITS] |= (1 << ((n) % NIFBITS)))
+#define IF_CLR(n, p)    ((p)->ifs_bits[(n)/NIFBITS] &= ~(1 << ((n) % NIFBITS)))
+#define IF_ISSET(n, p)  ((p)->ifs_bits[(n)/NIFBITS] & (1 << ((n) % NIFBITS)))
+#define IF_COPY(f, t)   bcopy(f, t, sizeof(*(f)))
+#define IF_ZERO(p)      bzero(p, sizeof(*(p)))
+
+/*
+ *	Passed by mrouted for an MRT_ADD_MIF - again we use the
+ *	mrouted 3.6 structures for compatibility
+ */
+
+struct mif6ctl {
+	mifi_t	mif6c_mifi;		/* Index of MIF */
+	unsigned char mif6c_flags;	/* MIFF_ flags */
+	unsigned char vifc_threshold;	/* ttl limit */
+	__u16	 mif6c_pifi;		/* the index of the physical IF */
+	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
+};
+
+#define MIFF_REGISTER	0x1	/* register vif	*/
+
+/*
+ *	Cache manipulation structures for mrouted and PIMd
+ */
+
+struct mf6cctl {
+	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
+	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
+	mifi_t	mf6cc_parent;			/* Where it arrived	*/
+	struct if_set mf6cc_ifset;		/* Where it is going */
+};
+
+/*
+ *	Group count retrieval for pim6sd
+ */
+
+struct sioc_sg_req6 {
+	struct sockaddr_in6 src;
+	struct sockaddr_in6 grp;
+	unsigned long pktcnt;
+	unsigned long bytecnt;
+	unsigned long wrong_if;
+};
+
+/*
+ *	To get vif packet counts
+ */
+
+struct sioc_mif_req6 {
+	mifi_t	mifi;		/* Which iface */
+	unsigned long icount;	/* In packets */
+	unsigned long ocount;	/* Out packets */
+	unsigned long ibytes;	/* In bytes */
+	unsigned long obytes;	/* Out bytes */
+};
+
+/*
+ *	That's all usermode folks
+ */
+
+
+
+/*
+ * Structure used to communicate from kernel to multicast router.
+ * We'll overlay the structure onto an MLD header (not an IPv6 heder like igmpmsg{}
+ * used for IPv4 implementation). This is because this structure will be passed via an
+ * IPv6 raw socket, on which an application will only receiver the payload i.e the data after
+ * the IPv6 header and all the extension headers. (See section 3 of RFC 3542)
+ */
+
+struct mrt6msg {
+#define MRT6MSG_NOCACHE		1
+#define MRT6MSG_WRONGMIF	2
+#define MRT6MSG_WHOLEPKT	3		/* used for use level encap */
+	__u8		im6_mbz;		/* must be zero		   */
+	__u8		im6_msgtype;		/* what type of message    */
+	__u16		im6_mif;		/* mif rec'd on		   */
+	__u32		im6_pad;		/* padding for 64 bit arch */
+	struct in6_addr	im6_src, im6_dst;
+};
+
+#endif /* _UAPI__LINUX_MROUTE6_H */
diff --git a/include/uapi/linux/msdos_fs.h b/include/uapi/linux/msdos_fs.h
new file mode 100644
index 0000000..996719f
--- /dev/null
+++ b/include/uapi/linux/msdos_fs.h
@@ -0,0 +1,167 @@
+#ifndef _UAPI_LINUX_MSDOS_FS_H
+#define _UAPI_LINUX_MSDOS_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+#include <asm/byteorder.h>
+
+/*
+ * The MS-DOS filesystem constants/structures
+ */
+
+#define SECTOR_SIZE	512		/* sector size (bytes) */
+#define SECTOR_BITS	9		/* log2(SECTOR_SIZE) */
+#define MSDOS_DPB	(MSDOS_DPS)	/* dir entries per block */
+#define MSDOS_DPB_BITS	4		/* log2(MSDOS_DPB) */
+#define MSDOS_DPS	(SECTOR_SIZE / sizeof(struct msdos_dir_entry))
+#define MSDOS_DPS_BITS	4		/* log2(MSDOS_DPS) */
+#define MSDOS_LONGNAME	256		/* maximum name length */
+#define CF_LE_W(v)	le16_to_cpu(v)
+#define CF_LE_L(v)	le32_to_cpu(v)
+#define CT_LE_W(v)	cpu_to_le16(v)
+#define CT_LE_L(v)	cpu_to_le32(v)
+
+#define MSDOS_ROOT_INO	 1	/* The root inode number */
+#define MSDOS_FSINFO_INO 2	/* Used for managing the FSINFO block */
+
+#define MSDOS_DIR_BITS	5	/* log2(sizeof(struct msdos_dir_entry)) */
+
+/* directory limit */
+#define FAT_MAX_DIR_ENTRIES	(65536)
+#define FAT_MAX_DIR_SIZE	(FAT_MAX_DIR_ENTRIES << MSDOS_DIR_BITS)
+
+#define ATTR_NONE	0	/* no attribute bits */
+#define ATTR_RO		1	/* read-only */
+#define ATTR_HIDDEN	2	/* hidden */
+#define ATTR_SYS	4	/* system */
+#define ATTR_VOLUME	8	/* volume label */
+#define ATTR_DIR	16	/* directory */
+#define ATTR_ARCH	32	/* archived */
+
+/* attribute bits that are copied "as is" */
+#define ATTR_UNUSED	(ATTR_VOLUME | ATTR_ARCH | ATTR_SYS | ATTR_HIDDEN)
+/* bits that are used by the Windows 95/Windows NT extended FAT */
+#define ATTR_EXT	(ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME)
+
+#define CASE_LOWER_BASE	8	/* base is lower case */
+#define CASE_LOWER_EXT	16	/* extension is lower case */
+
+#define DELETED_FLAG	0xe5	/* marks file as deleted when in name[0] */
+#define IS_FREE(n)	(!*(n) || *(n) == DELETED_FLAG)
+
+#define FAT_LFN_LEN	255	/* maximum long name length */
+#define MSDOS_NAME	11	/* maximum name length */
+#define MSDOS_SLOTS	21	/* max # of slots for short and long names */
+#define MSDOS_DOT	".          "	/* ".", padded to MSDOS_NAME chars */
+#define MSDOS_DOTDOT	"..         "	/* "..", padded to MSDOS_NAME chars */
+
+#define FAT_FIRST_ENT(s, x)	((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
+	MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
+
+/* start of data cluster's entry (number of reserved clusters) */
+#define FAT_START_ENT	2
+
+/* maximum number of clusters */
+#define MAX_FAT12	0xFF4
+#define MAX_FAT16	0xFFF4
+#define MAX_FAT32	0x0FFFFFF6
+#define MAX_FAT(s)	(MSDOS_SB(s)->fat_bits == 32 ? MAX_FAT32 : \
+	MSDOS_SB(s)->fat_bits == 16 ? MAX_FAT16 : MAX_FAT12)
+
+/* bad cluster mark */
+#define BAD_FAT12	0xFF7
+#define BAD_FAT16	0xFFF7
+#define BAD_FAT32	0x0FFFFFF7
+
+/* standard EOF */
+#define EOF_FAT12	0xFFF
+#define EOF_FAT16	0xFFFF
+#define EOF_FAT32	0x0FFFFFFF
+
+#define FAT_ENT_FREE	(0)
+#define FAT_ENT_BAD	(BAD_FAT32)
+#define FAT_ENT_EOF	(EOF_FAT32)
+
+#define FAT_FSINFO_SIG1	0x41615252
+#define FAT_FSINFO_SIG2	0x61417272
+#define IS_FSINFO(x)	(le32_to_cpu((x)->signature1) == FAT_FSINFO_SIG1 \
+			 && le32_to_cpu((x)->signature2) == FAT_FSINFO_SIG2)
+
+struct __fat_dirent {
+	long		d_ino;
+	__kernel_off_t	d_off;
+	unsigned short	d_reclen;
+	char		d_name[256]; /* We must not include limits.h! */
+};
+
+/*
+ * ioctl commands
+ */
+#define VFAT_IOCTL_READDIR_BOTH		_IOR('r', 1, struct __fat_dirent[2])
+#define VFAT_IOCTL_READDIR_SHORT	_IOR('r', 2, struct __fat_dirent[2])
+/* <linux/videotext.h> has used 0x72 ('r') in collision, so skip a few */
+#define FAT_IOCTL_GET_ATTRIBUTES	_IOR('r', 0x10, __u32)
+#define FAT_IOCTL_SET_ATTRIBUTES	_IOW('r', 0x11, __u32)
+
+struct fat_boot_sector {
+	__u8	ignored[3];	/* Boot strap short or near jump */
+	__u8	system_id[8];	/* Name - can be used to special case
+				   partition manager volumes */
+	__u8	sector_size[2];	/* bytes per logical sector */
+	__u8	sec_per_clus;	/* sectors/cluster */
+	__le16	reserved;	/* reserved sectors */
+	__u8	fats;		/* number of FATs */
+	__u8	dir_entries[2];	/* root directory entries */
+	__u8	sectors[2];	/* number of sectors */
+	__u8	media;		/* media code */
+	__le16	fat_length;	/* sectors/FAT */
+	__le16	secs_track;	/* sectors per track */
+	__le16	heads;		/* number of heads */
+	__le32	hidden;		/* hidden sectors (unused) */
+	__le32	total_sect;	/* number of sectors (if sectors == 0) */
+
+	/* The following fields are only used by FAT32 */
+	__le32	fat32_length;	/* sectors/FAT */
+	__le16	flags;		/* bit 8: fat mirroring, low 4: active fat */
+	__u8	version[2];	/* major, minor filesystem version */
+	__le32	root_cluster;	/* first cluster in root directory */
+	__le16	info_sector;	/* filesystem info sector */
+	__le16	backup_boot;	/* backup boot sector */
+	__le16	reserved2[6];	/* Unused */
+};
+
+struct fat_boot_fsinfo {
+	__le32   signature1;	/* 0x41615252L */
+	__le32   reserved1[120];	/* Nothing as far as I can tell */
+	__le32   signature2;	/* 0x61417272L */
+	__le32   free_clusters;	/* Free cluster count.  -1 if unknown */
+	__le32   next_cluster;	/* Most recently allocated cluster */
+	__le32   reserved2[4];
+};
+
+struct msdos_dir_entry {
+	__u8	name[MSDOS_NAME];/* name and extension */
+	__u8	attr;		/* attribute bits */
+	__u8    lcase;		/* Case for base and extension */
+	__u8	ctime_cs;	/* Creation time, centiseconds (0-199) */
+	__le16	ctime;		/* Creation time */
+	__le16	cdate;		/* Creation date */
+	__le16	adate;		/* Last access date */
+	__le16	starthi;	/* High 16 bits of cluster in FAT32 */
+	__le16	time,date,start;/* time, date and first cluster */
+	__le32	size;		/* file size (in bytes) */
+};
+
+/* Up to 13 characters of the name */
+struct msdos_dir_slot {
+	__u8    id;		/* sequence number for slot */
+	__u8    name0_4[10];	/* first 5 characters in name */
+	__u8    attr;		/* attribute byte */
+	__u8    reserved;	/* always 0 */
+	__u8    alias_checksum;	/* checksum for 8.3 alias */
+	__u8    name5_10[12];	/* 6 more characters in name */
+	__le16   start;		/* starting cluster number, 0 in long slots */
+	__u8    name11_12[4];	/* last 2 characters in name */
+};
+
+#endif /* _UAPI_LINUX_MSDOS_FS_H */
diff --git a/include/uapi/linux/msg.h b/include/uapi/linux/msg.h
new file mode 100644
index 0000000..78dbd2f
--- /dev/null
+++ b/include/uapi/linux/msg.h
@@ -0,0 +1,75 @@
+#ifndef _UAPI_LINUX_MSG_H
+#define _UAPI_LINUX_MSG_H
+
+#include <linux/ipc.h>
+
+/* ipcs ctl commands */
+#define MSG_STAT 11
+#define MSG_INFO 12
+
+/* msgrcv options */
+#define MSG_NOERROR     010000  /* no error if message is too big */
+#define MSG_EXCEPT      020000  /* recv any msg except of specified type.*/
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct msqid_ds {
+	struct ipc_perm msg_perm;
+	struct msg *msg_first;		/* first message on queue,unused  */
+	struct msg *msg_last;		/* last message in queue,unused */
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_lcbytes;	/* Reuse junk fields for 32 bit */
+	unsigned long  msg_lqbytes;	/* ditto */
+	unsigned short msg_cbytes;	/* current number of bytes on queue */
+	unsigned short msg_qnum;	/* number of messages in queue */
+	unsigned short msg_qbytes;	/* max number of bytes on queue */
+	__kernel_ipc_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_ipc_pid_t msg_lrpid;	/* last receive pid */
+};
+
+/* Include the definition of msqid64_ds */
+#include <asm/msgbuf.h>
+
+/* message buffer for msgsnd and msgrcv calls */
+struct msgbuf {
+	long mtype;         /* type of message */
+	char mtext[1];      /* message text */
+};
+
+/* buffer for msgctl calls IPC_INFO, MSG_INFO */
+struct msginfo {
+	int msgpool;
+	int msgmap; 
+	int msgmax; 
+	int msgmnb; 
+	int msgmni; 
+	int msgssz; 
+	int msgtql; 
+	unsigned short  msgseg; 
+};
+
+/*
+ * Scaling factor to compute msgmni:
+ * the memory dedicated to msg queues (msgmni * msgmnb) should occupy
+ * at most 1/MSG_MEM_SCALE of the lowmem (see the formula in ipc/msg.c):
+ * up to 8MB       : msgmni = 16 (MSGMNI)
+ * 4 GB            : msgmni = 8K
+ * more than 16 GB : msgmni = 32K (IPCMNI)
+ */
+#define MSG_MEM_SCALE 32
+
+#define MSGMNI    16   /* <= IPCMNI */     /* max # of msg queue identifiers */
+#define MSGMAX  8192   /* <= INT_MAX */   /* max size of message (bytes) */
+#define MSGMNB 16384   /* <= INT_MAX */   /* default max size of a message queue */
+
+/* unused */
+#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
+#define MSGTQL  MSGMNB            /* number of system message headers */
+#define MSGMAP  MSGMNB            /* number of entries in message map */
+#define MSGSSZ  16                /* message segment size */
+#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
+#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
+
+
+#endif /* _UAPI_LINUX_MSG_H */
diff --git a/include/linux/mtio.h b/include/uapi/linux/mtio.h
similarity index 100%
rename from include/linux/mtio.h
rename to include/uapi/linux/mtio.h
diff --git a/include/uapi/linux/n_r3964.h b/include/uapi/linux/n_r3964.h
new file mode 100644
index 0000000..81337cb
--- /dev/null
+++ b/include/uapi/linux/n_r3964.h
@@ -0,0 +1,98 @@
+/* r3964 linediscipline for linux
+ *
+ * -----------------------------------------------------------
+ * Copyright by
+ * Philips Automation Projects
+ * Kassel (Germany)
+ * -----------------------------------------------------------
+ * This software may be used and distributed according to the terms of
+ * the GNU General Public License, incorporated herein by reference.
+ *
+ * Author:
+ * L. Haag
+ *
+ * $Log: r3964.h,v $
+ * Revision 1.4  2005/12/21 19:54:24  Kurt Huwig <kurt huwig de>
+ * Fixed HZ usage on 2.6 kernels
+ * Removed unnecessary include
+ *
+ * Revision 1.3  2001/03/18 13:02:24  dwmw2
+ * Fix timer usage, use spinlocks properly.
+ *
+ * Revision 1.2  2001/03/18 12:53:15  dwmw2
+ * Merge changes in 2.4.2
+ *
+ * Revision 1.1.1.1  1998/10/13 16:43:14  dwmw2
+ * This'll screw the version control
+ *
+ * Revision 1.6  1998/09/30 00:40:38  dwmw2
+ * Updated to use kernel's N_R3964 if available
+ *
+ * Revision 1.4  1998/04/02 20:29:44  lhaag
+ * select, blocking, ...
+ *
+ * Revision 1.3  1998/02/12 18:58:43  root
+ * fixed some memory leaks
+ * calculation of checksum characters
+ *
+ * Revision 1.2  1998/02/07 13:03:17  root
+ * ioctl read_telegram
+ *
+ * Revision 1.1  1998/02/06 19:19:43  root
+ * Initial revision
+ *
+ *
+ */
+
+#ifndef _UAPI__LINUX_N_R3964_H__
+#define _UAPI__LINUX_N_R3964_H__
+
+/* line disciplines for r3964 protocol */
+
+
+/*
+ * Ioctl-commands
+ */
+
+#define R3964_ENABLE_SIGNALS      0x5301
+#define R3964_SETPRIORITY         0x5302
+#define R3964_USE_BCC             0x5303
+#define R3964_READ_TELEGRAM       0x5304
+
+/* Options for R3964_SETPRIORITY */
+#define R3964_MASTER   0
+#define R3964_SLAVE    1
+
+/* Options for R3964_ENABLE_SIGNALS */
+#define R3964_SIG_ACK   0x0001
+#define R3964_SIG_DATA  0x0002
+#define R3964_SIG_ALL   0x000f
+#define R3964_SIG_NONE  0x0000
+#define R3964_USE_SIGIO 0x1000
+
+/*
+ * r3964 operation states:
+ */
+
+/* types for msg_id: */
+enum {R3964_MSG_ACK=1, R3964_MSG_DATA };
+
+#define R3964_MAX_MSG_COUNT 32
+
+/* error codes for client messages */
+#define R3964_OK 0        /* no error. */
+#define R3964_TX_FAIL -1  /* transmission error, block NOT sent */
+#define R3964_OVERFLOW -2 /* msg queue overflow */
+
+/* the client gets this struct when calling read(fd,...): */
+struct r3964_client_message {
+	  int     msg_id;
+	  int     arg;
+	  int     error_code;
+};
+
+#define R3964_MTU      256
+
+
+
+#endif /* _UAPI__LINUX_N_R3964_H__ */
diff --git a/include/uapi/linux/nbd.h b/include/uapi/linux/nbd.h
new file mode 100644
index 0000000..dfb5144
--- /dev/null
+++ b/include/uapi/linux/nbd.h
@@ -0,0 +1,77 @@
+/*
+ * 1999 Copyright (C) Pavel Machek, pavel@ucw.cz. This code is GPL.
+ * 1999/11/04 Copyright (C) 1999 VMware, Inc. (Regis "HPReg" Duchesne)
+ *            Made nbd_end_request() use the io_request_lock
+ * 2001 Copyright (C) Steven Whitehouse
+ *            New nbd_end_request() for compatibility with new linux block
+ *            layer code.
+ * 2003/06/24 Louis D. Langholtz <ldl@aros.net>
+ *            Removed unneeded blksize_bits field from nbd_device struct.
+ *            Cleanup PARANOIA usage & code.
+ * 2004/02/19 Paul Clements
+ *            Removed PARANOIA, plus various cleanup and comments
+ */
+
+#ifndef _UAPILINUX_NBD_H
+#define _UAPILINUX_NBD_H
+
+#include <linux/types.h>
+
+#define NBD_SET_SOCK	_IO( 0xab, 0 )
+#define NBD_SET_BLKSIZE	_IO( 0xab, 1 )
+#define NBD_SET_SIZE	_IO( 0xab, 2 )
+#define NBD_DO_IT	_IO( 0xab, 3 )
+#define NBD_CLEAR_SOCK	_IO( 0xab, 4 )
+#define NBD_CLEAR_QUE	_IO( 0xab, 5 )
+#define NBD_PRINT_DEBUG	_IO( 0xab, 6 )
+#define NBD_SET_SIZE_BLOCKS	_IO( 0xab, 7 )
+#define NBD_DISCONNECT  _IO( 0xab, 8 )
+#define NBD_SET_TIMEOUT _IO( 0xab, 9 )
+#define NBD_SET_FLAGS   _IO( 0xab, 10)
+
+enum {
+	NBD_CMD_READ = 0,
+	NBD_CMD_WRITE = 1,
+	NBD_CMD_DISC = 2,
+	/* there is a gap here to match userspace */
+	NBD_CMD_TRIM = 4
+};
+
+/* values for flags field */
+#define NBD_FLAG_HAS_FLAGS    (1 << 0) /* nbd-server supports flags */
+#define NBD_FLAG_READ_ONLY    (1 << 1) /* device is read-only */
+/* there is a gap here to match userspace */
+#define NBD_FLAG_SEND_TRIM    (1 << 5) /* send trim/discard */
+
+#define nbd_cmd(req) ((req)->cmd[0])
+
+/* userspace doesn't need the nbd_device structure */
+
+/* These are sent over the network in the request/reply magic fields */
+
+#define NBD_REQUEST_MAGIC 0x25609513
+#define NBD_REPLY_MAGIC 0x67446698
+/* Do *not* use magics: 0x12560953 0x96744668. */
+
+/*
+ * This is the packet used for communication between client and
+ * server. All data are in network byte order.
+ */
+struct nbd_request {
+	__be32 magic;
+	__be32 type;	/* == READ || == WRITE 	*/
+	char handle[8];
+	__be64 from;
+	__be32 len;
+} __attribute__((packed));
+
+/*
+ * This is the reply packet that nbd-server sends back to the client after
+ * it has completed an I/O request (or an error occurs).
+ */
+struct nbd_reply {
+	__be32 magic;
+	__be32 error;		/* 0 = ok, else error	*/
+	char handle[8];		/* handle you got from request	*/
+};
+#endif /* _UAPILINUX_NBD_H */
diff --git a/include/linux/ncp.h b/include/uapi/linux/ncp.h
similarity index 100%
rename from include/linux/ncp.h
rename to include/uapi/linux/ncp.h
diff --git a/include/linux/ncp_fs.h b/include/uapi/linux/ncp_fs.h
similarity index 100%
rename from include/linux/ncp_fs.h
rename to include/uapi/linux/ncp_fs.h
diff --git a/include/linux/ncp_mount.h b/include/uapi/linux/ncp_mount.h
similarity index 100%
rename from include/linux/ncp_mount.h
rename to include/uapi/linux/ncp_mount.h
diff --git a/include/linux/ncp_no.h b/include/uapi/linux/ncp_no.h
similarity index 100%
rename from include/linux/ncp_no.h
rename to include/uapi/linux/ncp_no.h
diff --git a/include/linux/neighbour.h b/include/uapi/linux/neighbour.h
similarity index 100%
rename from include/linux/neighbour.h
rename to include/uapi/linux/neighbour.h
diff --git a/include/uapi/linux/net.h b/include/uapi/linux/net.h
new file mode 100644
index 0000000..9457239
--- /dev/null
+++ b/include/uapi/linux/net.h
@@ -0,0 +1,57 @@
+/*
+ * NET		An implementation of the SOCKET network access protocol.
+ *		This is the master header file for the Linux NET layer,
+ *		or, in plain English: the networking handling part of the
+ *		kernel.
+ *
+ * Version:	@(#)net.h	1.0.3	05/25/93
+ *
+ * Authors:	Orest Zborowski, <obz@Kodak.COM>
+ *		Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_NET_H
+#define _UAPI_LINUX_NET_H
+
+#include <linux/socket.h>
+#include <asm/socket.h>
+
+#define NPROTO		AF_MAX
+
+#define SYS_SOCKET	1		/* sys_socket(2)		*/
+#define SYS_BIND	2		/* sys_bind(2)			*/
+#define SYS_CONNECT	3		/* sys_connect(2)		*/
+#define SYS_LISTEN	4		/* sys_listen(2)		*/
+#define SYS_ACCEPT	5		/* sys_accept(2)		*/
+#define SYS_GETSOCKNAME	6		/* sys_getsockname(2)		*/
+#define SYS_GETPEERNAME	7		/* sys_getpeername(2)		*/
+#define SYS_SOCKETPAIR	8		/* sys_socketpair(2)		*/
+#define SYS_SEND	9		/* sys_send(2)			*/
+#define SYS_RECV	10		/* sys_recv(2)			*/
+#define SYS_SENDTO	11		/* sys_sendto(2)		*/
+#define SYS_RECVFROM	12		/* sys_recvfrom(2)		*/
+#define SYS_SHUTDOWN	13		/* sys_shutdown(2)		*/
+#define SYS_SETSOCKOPT	14		/* sys_setsockopt(2)		*/
+#define SYS_GETSOCKOPT	15		/* sys_getsockopt(2)		*/
+#define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
+#define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
+#define SYS_ACCEPT4	18		/* sys_accept4(2)		*/
+#define SYS_RECVMMSG	19		/* sys_recvmmsg(2)		*/
+#define SYS_SENDMMSG	20		/* sys_sendmmsg(2)		*/
+
+typedef enum {
+	SS_FREE = 0,			/* not allocated		*/
+	SS_UNCONNECTED,			/* unconnected to any socket	*/
+	SS_CONNECTING,			/* in process of connecting	*/
+	SS_CONNECTED,			/* connected to socket		*/
+	SS_DISCONNECTING		/* in process of disconnecting	*/
+} socket_state;
+
+#define __SO_ACCEPTCON	(1 << 16)	/* performed a listen		*/
+
+#endif /* _UAPI_LINUX_NET_H */
diff --git a/include/linux/net_dropmon.h b/include/uapi/linux/net_dropmon.h
similarity index 100%
rename from include/linux/net_dropmon.h
rename to include/uapi/linux/net_dropmon.h
diff --git a/include/linux/net_tstamp.h b/include/uapi/linux/net_tstamp.h
similarity index 100%
rename from include/linux/net_tstamp.h
rename to include/uapi/linux/net_tstamp.h
diff --git a/include/uapi/linux/netdevice.h b/include/uapi/linux/netdevice.h
new file mode 100644
index 0000000..6b9500b
--- /dev/null
+++ b/include/uapi/linux/netdevice.h
@@ -0,0 +1,53 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the Interfaces handler.
+ *
+ * Version:	@(#)dev.h	1.0.10	08/12/93
+ *
+ * Authors:	Ross Biro
+ *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *		Corey Minyard <wf-rch!minyard@relay.EU.net>
+ *		Donald J. Becker, <becker@cesdis.gsfc.nasa.gov>
+ *		Alan Cox, <alan@lxorguk.ukuu.org.uk>
+ *		Bjorn Ekwall. <bj0rn@blox.se>
+ *              Pekka Riikonen <priikone@poseidon.pspt.fi>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ *		Moved to /usr/include/linux for NET3
+ */
+#ifndef _UAPI_LINUX_NETDEVICE_H
+#define _UAPI_LINUX_NETDEVICE_H
+
+#include <linux/if.h>
+#include <linux/if_ether.h>
+#include <linux/if_packet.h>
+#include <linux/if_link.h>
+
+
+#define MAX_ADDR_LEN	32		/* Largest hardware address length */
+
+/* Initial net device group. All devices belong to group 0 by default. */
+#define INIT_NETDEV_GROUP	0
+
+
+
+/* Media selection options. */
+enum {
+        IF_PORT_UNKNOWN = 0,
+        IF_PORT_10BASE2,
+        IF_PORT_10BASET,
+        IF_PORT_AUI,
+        IF_PORT_100BASET,
+        IF_PORT_100BASETX,
+        IF_PORT_100BASEFX
+};
+
+
+#endif /* _UAPI_LINUX_NETDEVICE_H */
diff --git a/include/uapi/linux/netfilter.h b/include/uapi/linux/netfilter.h
new file mode 100644
index 0000000..f7dc0eb
--- /dev/null
+++ b/include/uapi/linux/netfilter.h
@@ -0,0 +1,72 @@
+#ifndef _UAPI__LINUX_NETFILTER_H
+#define _UAPI__LINUX_NETFILTER_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/sysctl.h>
+
+
+/* Responses from hook functions. */
+#define NF_DROP 0
+#define NF_ACCEPT 1
+#define NF_STOLEN 2
+#define NF_QUEUE 3
+#define NF_REPEAT 4
+#define NF_STOP 5
+#define NF_MAX_VERDICT NF_STOP
+
+/* we overload the higher bits for encoding auxiliary data such as the queue
+ * number or errno values. Not nice, but better than additional function
+ * arguments. */
+#define NF_VERDICT_MASK 0x000000ff
+
+/* extra verdict flags have mask 0x0000ff00 */
+#define NF_VERDICT_FLAG_QUEUE_BYPASS	0x00008000
+
+/* queue number (NF_QUEUE) or errno (NF_DROP) */
+#define NF_VERDICT_QMASK 0xffff0000
+#define NF_VERDICT_QBITS 16
+
+#define NF_QUEUE_NR(x) ((((x) << 16) & NF_VERDICT_QMASK) | NF_QUEUE)
+
+#define NF_DROP_ERR(x) (((-x) << 16) | NF_DROP)
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+/* Generic cache responses from hook functions.
+   <= 0x2000 is used for protocol-flags. */
+#define NFC_UNKNOWN 0x4000
+#define NFC_ALTERED 0x8000
+
+/* NF_VERDICT_BITS should be 8 now, but userspace might break if this changes */
+#define NF_VERDICT_BITS 16
+#endif
+
+enum nf_inet_hooks {
+	NF_INET_PRE_ROUTING,
+	NF_INET_LOCAL_IN,
+	NF_INET_FORWARD,
+	NF_INET_LOCAL_OUT,
+	NF_INET_POST_ROUTING,
+	NF_INET_NUMHOOKS
+};
+
+enum {
+	NFPROTO_UNSPEC =  0,
+	NFPROTO_IPV4   =  2,
+	NFPROTO_ARP    =  3,
+	NFPROTO_BRIDGE =  7,
+	NFPROTO_IPV6   = 10,
+	NFPROTO_DECNET = 12,
+	NFPROTO_NUMPROTO,
+};
+
+union nf_inet_addr {
+	__u32		all[4];
+	__be32		ip;
+	__be32		ip6[4];
+	struct in_addr	in;
+	struct in6_addr	in6;
+};
+
+#endif /* _UAPI__LINUX_NETFILTER_H */
diff --git a/include/linux/netfilter_arp.h b/include/uapi/linux/netfilter_arp.h
similarity index 100%
rename from include/linux/netfilter_arp.h
rename to include/uapi/linux/netfilter_arp.h
diff --git a/include/uapi/linux/netfilter_bridge.h b/include/uapi/linux/netfilter_bridge.h
new file mode 100644
index 0000000..a5eda6d
--- /dev/null
+++ b/include/uapi/linux/netfilter_bridge.h
@@ -0,0 +1,27 @@
+#ifndef _UAPI__LINUX_BRIDGE_NETFILTER_H
+#define _UAPI__LINUX_BRIDGE_NETFILTER_H
+
+/* bridge-specific defines for netfilter. 
+ */
+
+#include <linux/netfilter.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/if_pppox.h>
+
+/* Bridge Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_BR_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_BR_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_BR_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_BR_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_BR_POST_ROUTING	4
+/* Not really a hook, but used for the ebtables broute table */
+#define NF_BR_BROUTING		5
+#define NF_BR_NUMHOOKS		6
+
+#endif /* _UAPI__LINUX_BRIDGE_NETFILTER_H */
diff --git a/include/linux/netfilter_decnet.h b/include/uapi/linux/netfilter_decnet.h
similarity index 100%
rename from include/linux/netfilter_decnet.h
rename to include/uapi/linux/netfilter_decnet.h
diff --git a/include/uapi/linux/netfilter_ipv4.h b/include/uapi/linux/netfilter_ipv4.h
new file mode 100644
index 0000000..91ddd1f
--- /dev/null
+++ b/include/uapi/linux/netfilter_ipv4.h
@@ -0,0 +1,81 @@
+/* IPv4-specific defines for netfilter. 
+ * (C)1998 Rusty Russell -- This code is GPL.
+ */
+#ifndef _UAPI__LINUX_IP_NETFILTER_H
+#define _UAPI__LINUX_IP_NETFILTER_H
+
+
+#include <linux/netfilter.h>
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_IP_SRC		0x0001
+/* Dest IP address. */
+#define NFC_IP_DST		0x0002
+/* Input device. */
+#define NFC_IP_IF_IN		0x0004
+/* Output device. */
+#define NFC_IP_IF_OUT		0x0008
+/* TOS. */
+#define NFC_IP_TOS		0x0010
+/* Protocol. */
+#define NFC_IP_PROTO		0x0020
+/* IP options. */
+#define NFC_IP_OPTIONS		0x0040
+/* Frag & flags. */
+#define NFC_IP_FRAG		0x0080
+
+/* Per-protocol information: only matters if proto match. */
+/* TCP flags. */
+#define NFC_IP_TCPFLAGS		0x0100
+/* Source port. */
+#define NFC_IP_SRC_PT		0x0200
+/* Dest port. */
+#define NFC_IP_DST_PT		0x0400
+/* Something else about the proto */
+#define NFC_IP_PROTO_UNKNOWN	0x2000
+
+/* IP Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_IP_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_IP_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_IP_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_IP_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_IP_POST_ROUTING	4
+#define NF_IP_NUMHOOKS		5
+#endif /* ! __KERNEL__ */
+
+enum nf_ip_hook_priorities {
+	NF_IP_PRI_FIRST = INT_MIN,
+	NF_IP_PRI_CONNTRACK_DEFRAG = -400,
+	NF_IP_PRI_RAW = -300,
+	NF_IP_PRI_SELINUX_FIRST = -225,
+	NF_IP_PRI_CONNTRACK = -200,
+	NF_IP_PRI_MANGLE = -150,
+	NF_IP_PRI_NAT_DST = -100,
+	NF_IP_PRI_FILTER = 0,
+	NF_IP_PRI_SECURITY = 50,
+	NF_IP_PRI_NAT_SRC = 100,
+	NF_IP_PRI_SELINUX_LAST = 225,
+	NF_IP_PRI_CONNTRACK_HELPER = 300,
+	NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX,
+	NF_IP_PRI_LAST = INT_MAX,
+};
+
+/* Arguments for setsockopt SOL_IP: */
+/* 2.0 firewalling went from 64 through 71 (and +256, +512, etc). */
+/* 2.2 firewalling (+ masq) went from 64 through 76 */
+/* 2.4 firewalling went 64 through 67. */
+#define SO_ORIGINAL_DST 80
+
+
+#endif /* _UAPI__LINUX_IP_NETFILTER_H */
diff --git a/include/uapi/linux/netfilter_ipv6.h b/include/uapi/linux/netfilter_ipv6.h
new file mode 100644
index 0000000..12497c6
--- /dev/null
+++ b/include/uapi/linux/netfilter_ipv6.h
@@ -0,0 +1,79 @@
+/* IPv6-specific defines for netfilter. 
+ * (C)1998 Rusty Russell -- This code is GPL.
+ * (C)1999 David Jeffery
+ *   this header was blatantly ripped from netfilter_ipv4.h 
+ *   it's amazing what adding a bunch of 6s can do =8^)
+ */
+#ifndef _UAPI__LINUX_IP6_NETFILTER_H
+#define _UAPI__LINUX_IP6_NETFILTER_H
+
+
+#include <linux/netfilter.h>
+
+/* only for userspace compatibility */
+#ifndef __KERNEL__
+
+#include <limits.h> /* for INT_MIN, INT_MAX */
+
+/* IP Cache bits. */
+/* Src IP address. */
+#define NFC_IP6_SRC              0x0001
+/* Dest IP address. */
+#define NFC_IP6_DST              0x0002
+/* Input device. */
+#define NFC_IP6_IF_IN            0x0004
+/* Output device. */
+#define NFC_IP6_IF_OUT           0x0008
+/* TOS. */
+#define NFC_IP6_TOS              0x0010
+/* Protocol. */
+#define NFC_IP6_PROTO            0x0020
+/* IP options. */
+#define NFC_IP6_OPTIONS          0x0040
+/* Frag & flags. */
+#define NFC_IP6_FRAG             0x0080
+
+
+/* Per-protocol information: only matters if proto match. */
+/* TCP flags. */
+#define NFC_IP6_TCPFLAGS         0x0100
+/* Source port. */
+#define NFC_IP6_SRC_PT           0x0200
+/* Dest port. */
+#define NFC_IP6_DST_PT           0x0400
+/* Something else about the proto */
+#define NFC_IP6_PROTO_UNKNOWN    0x2000
+
+/* IP6 Hooks */
+/* After promisc drops, checksum checks. */
+#define NF_IP6_PRE_ROUTING	0
+/* If the packet is destined for this box. */
+#define NF_IP6_LOCAL_IN		1
+/* If the packet is destined for another interface. */
+#define NF_IP6_FORWARD		2
+/* Packets coming from a local process. */
+#define NF_IP6_LOCAL_OUT		3
+/* Packets about to hit the wire. */
+#define NF_IP6_POST_ROUTING	4
+#define NF_IP6_NUMHOOKS		5
+#endif /* ! __KERNEL__ */
+
+
+enum nf_ip6_hook_priorities {
+	NF_IP6_PRI_FIRST = INT_MIN,
+	NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
+	NF_IP6_PRI_RAW = -300,
+	NF_IP6_PRI_SELINUX_FIRST = -225,
+	NF_IP6_PRI_CONNTRACK = -200,
+	NF_IP6_PRI_MANGLE = -150,
+	NF_IP6_PRI_NAT_DST = -100,
+	NF_IP6_PRI_FILTER = 0,
+	NF_IP6_PRI_SECURITY = 50,
+	NF_IP6_PRI_NAT_SRC = 100,
+	NF_IP6_PRI_SELINUX_LAST = 225,
+	NF_IP6_PRI_CONNTRACK_HELPER = 300,
+	NF_IP6_PRI_LAST = INT_MAX,
+};
+
+
+#endif /* _UAPI__LINUX_IP6_NETFILTER_H */
diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h
new file mode 100644
index 0000000..78d5b8a
--- /dev/null
+++ b/include/uapi/linux/netlink.h
@@ -0,0 +1,153 @@
+#ifndef _UAPI__LINUX_NETLINK_H
+#define _UAPI__LINUX_NETLINK_H
+
+#include <linux/socket.h> /* for __kernel_sa_family_t */
+#include <linux/types.h>
+
+#define NETLINK_ROUTE		0	/* Routing/device hook				*/
+#define NETLINK_UNUSED		1	/* Unused number				*/
+#define NETLINK_USERSOCK	2	/* Reserved for user mode socket protocols 	*/
+#define NETLINK_FIREWALL	3	/* Unused number, formerly ip_queue		*/
+#define NETLINK_SOCK_DIAG	4	/* socket monitoring				*/
+#define NETLINK_NFLOG		5	/* netfilter/iptables ULOG */
+#define NETLINK_XFRM		6	/* ipsec */
+#define NETLINK_SELINUX		7	/* SELinux event notifications */
+#define NETLINK_ISCSI		8	/* Open-iSCSI */
+#define NETLINK_AUDIT		9	/* auditing */
+#define NETLINK_FIB_LOOKUP	10	
+#define NETLINK_CONNECTOR	11
+#define NETLINK_NETFILTER	12	/* netfilter subsystem */
+#define NETLINK_IP6_FW		13
+#define NETLINK_DNRTMSG		14	/* DECnet routing messages */
+#define NETLINK_KOBJECT_UEVENT	15	/* Kernel messages to userspace */
+#define NETLINK_GENERIC		16
+/* leave room for NETLINK_DM (DM Events) */
+#define NETLINK_SCSITRANSPORT	18	/* SCSI Transports */
+#define NETLINK_ECRYPTFS	19
+#define NETLINK_RDMA		20
+#define NETLINK_CRYPTO		21	/* Crypto layer */
+
+#define NETLINK_INET_DIAG	NETLINK_SOCK_DIAG
+
+#define MAX_LINKS 32		
+
+struct sockaddr_nl {
+	__kernel_sa_family_t	nl_family;	/* AF_NETLINK	*/
+	unsigned short	nl_pad;		/* zero		*/
+	__u32		nl_pid;		/* port ID	*/
+       	__u32		nl_groups;	/* multicast groups mask */
+};
+
+struct nlmsghdr {
+	__u32		nlmsg_len;	/* Length of message including header */
+	__u16		nlmsg_type;	/* Message content */
+	__u16		nlmsg_flags;	/* Additional flags */
+	__u32		nlmsg_seq;	/* Sequence number */
+	__u32		nlmsg_pid;	/* Sending process port ID */
+};
+
+/* Flags values */
+
+#define NLM_F_REQUEST		1	/* It is request message. 	*/
+#define NLM_F_MULTI		2	/* Multipart message, terminated by NLMSG_DONE */
+#define NLM_F_ACK		4	/* Reply with ack, with zero or error code */
+#define NLM_F_ECHO		8	/* Echo this request 		*/
+#define NLM_F_DUMP_INTR		16	/* Dump was inconsistent due to sequence change */
+
+/* Modifiers to GET request */
+#define NLM_F_ROOT	0x100	/* specify tree	root	*/
+#define NLM_F_MATCH	0x200	/* return all matching	*/
+#define NLM_F_ATOMIC	0x400	/* atomic GET		*/
+#define NLM_F_DUMP	(NLM_F_ROOT|NLM_F_MATCH)
+
+/* Modifiers to NEW request */
+#define NLM_F_REPLACE	0x100	/* Override existing		*/
+#define NLM_F_EXCL	0x200	/* Do not touch, if it exists	*/
+#define NLM_F_CREATE	0x400	/* Create, if it does not exist	*/
+#define NLM_F_APPEND	0x800	/* Add to end of list		*/
+
+/*
+   4.4BSD ADD		NLM_F_CREATE|NLM_F_EXCL
+   4.4BSD CHANGE	NLM_F_REPLACE
+
+   True CHANGE		NLM_F_CREATE|NLM_F_REPLACE
+   Append		NLM_F_CREATE
+   Check		NLM_F_EXCL
+ */
+
+#define NLMSG_ALIGNTO	4U
+#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
+#define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
+#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
+#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
+#define NLMSG_DATA(nlh)  ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
+#define NLMSG_NEXT(nlh,len)	 ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
+				  (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
+#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
+			   (nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
+			   (nlh)->nlmsg_len <= (len))
+#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))
+
+#define NLMSG_NOOP		0x1	/* Nothing.		*/
+#define NLMSG_ERROR		0x2	/* Error		*/
+#define NLMSG_DONE		0x3	/* End of a dump	*/
+#define NLMSG_OVERRUN		0x4	/* Data lost		*/
+
+#define NLMSG_MIN_TYPE		0x10	/* < 0x10: reserved control messages */
+
+struct nlmsgerr {
+	int		error;
+	struct nlmsghdr msg;
+};
+
+#define NETLINK_ADD_MEMBERSHIP	1
+#define NETLINK_DROP_MEMBERSHIP	2
+#define NETLINK_PKTINFO		3
+#define NETLINK_BROADCAST_ERROR	4
+#define NETLINK_NO_ENOBUFS	5
+
+struct nl_pktinfo {
+	__u32	group;
+};
+
+#define NET_MAJOR 36		/* Major 36 is reserved for networking 						*/
+
+enum {
+	NETLINK_UNCONNECTED = 0,
+	NETLINK_CONNECTED,
+};
+
+/*
+ *  <------- NLA_HDRLEN ------> <-- NLA_ALIGN(payload)-->
+ * +---------------------+- - -+- - - - - - - - - -+- - -+
+ * |        Header       | Pad |     Payload       | Pad |
+ * |   (struct nlattr)   | ing |                   | ing |
+ * +---------------------+- - -+- - - - - - - - - -+- - -+
+ *  <-------------- nlattr->nla_len -------------->
+ */
+
+struct nlattr {
+	__u16           nla_len;
+	__u16           nla_type;
+};
+
+/*
+ * nla_type (16 bits)
+ * +---+---+-------------------------------+
+ * | N | O | Attribute Type                |
+ * +---+---+-------------------------------+
+ * N := Carries nested attributes
+ * O := Payload stored in network byte order
+ *
+ * Note: The N and O flag are mutually exclusive.
+ */
+#define NLA_F_NESTED		(1 << 15)
+#define NLA_F_NET_BYTEORDER	(1 << 14)
+#define NLA_TYPE_MASK		~(NLA_F_NESTED | NLA_F_NET_BYTEORDER)
+
+#define NLA_ALIGNTO		4
+#define NLA_ALIGN(len)		(((len) + NLA_ALIGNTO - 1) & ~(NLA_ALIGNTO - 1))
+#define NLA_HDRLEN		((int) NLA_ALIGN(sizeof(struct nlattr)))
+
+
+#endif /* _UAPI__LINUX_NETLINK_H */
diff --git a/include/linux/netrom.h b/include/uapi/linux/netrom.h
similarity index 100%
rename from include/linux/netrom.h
rename to include/uapi/linux/netrom.h
diff --git a/include/linux/nfc.h b/include/uapi/linux/nfc.h
similarity index 100%
rename from include/linux/nfc.h
rename to include/uapi/linux/nfc.h
diff --git a/include/uapi/linux/nfs.h b/include/uapi/linux/nfs.h
new file mode 100644
index 0000000..5199a36
--- /dev/null
+++ b/include/uapi/linux/nfs.h
@@ -0,0 +1,131 @@
+/*
+ * NFS protocol definitions
+ *
+ * This file contains constants mostly for Version 2 of the protocol,
+ * but also has a couple of NFSv3 bits in (notably the error codes).
+ */
+#ifndef _UAPI_LINUX_NFS_H
+#define _UAPI_LINUX_NFS_H
+
+#define NFS_PROGRAM	100003
+#define NFS_PORT	2049
+#define NFS_MAXDATA	8192
+#define NFS_MAXPATHLEN	1024
+#define NFS_MAXNAMLEN	255
+#define NFS_MAXGROUPS	16
+#define NFS_FHSIZE	32
+#define NFS_COOKIESIZE	4
+#define NFS_FIFO_DEV	(-1)
+#define NFSMODE_FMT	0170000
+#define NFSMODE_DIR	0040000
+#define NFSMODE_CHR	0020000
+#define NFSMODE_BLK	0060000
+#define NFSMODE_REG	0100000
+#define NFSMODE_LNK	0120000
+#define NFSMODE_SOCK	0140000
+#define NFSMODE_FIFO	0010000
+
+#define NFS_MNT_PROGRAM		100005
+#define NFS_MNT_VERSION		1
+#define NFS_MNT3_VERSION	3
+
+#define NFS_PIPE_DIRNAME "nfs"
+
+/*
+ * NFS stats. The good thing with these values is that NFSv3 errors are
+ * a superset of NFSv2 errors (with the exception of NFSERR_WFLUSH which
+ * no-one uses anyway), so we can happily mix code as long as we make sure
+ * no NFSv3 errors are returned to NFSv2 clients.
+ * Error codes that have a `--' in the v2 column are not part of the
+ * standard, but seem to be widely used nevertheless.
+ */
+ enum nfs_stat {
+	NFS_OK = 0,			/* v2 v3 v4 */
+	NFSERR_PERM = 1,		/* v2 v3 v4 */
+	NFSERR_NOENT = 2,		/* v2 v3 v4 */
+	NFSERR_IO = 5,			/* v2 v3 v4 */
+	NFSERR_NXIO = 6,		/* v2 v3 v4 */
+	NFSERR_EAGAIN = 11,		/* v2 v3 */
+	NFSERR_ACCES = 13,		/* v2 v3 v4 */
+	NFSERR_EXIST = 17,		/* v2 v3 v4 */
+	NFSERR_XDEV = 18,		/*    v3 v4 */
+	NFSERR_NODEV = 19,		/* v2 v3 v4 */
+	NFSERR_NOTDIR = 20,		/* v2 v3 v4 */
+	NFSERR_ISDIR = 21,		/* v2 v3 v4 */
+	NFSERR_INVAL = 22,		/* v2 v3 v4 */
+	NFSERR_FBIG = 27,		/* v2 v3 v4 */
+	NFSERR_NOSPC = 28,		/* v2 v3 v4 */
+	NFSERR_ROFS = 30,		/* v2 v3 v4 */
+	NFSERR_MLINK = 31,		/*    v3 v4 */
+	NFSERR_OPNOTSUPP = 45,		/* v2 v3 */
+	NFSERR_NAMETOOLONG = 63,	/* v2 v3 v4 */
+	NFSERR_NOTEMPTY = 66,		/* v2 v3 v4 */
+	NFSERR_DQUOT = 69,		/* v2 v3 v4 */
+	NFSERR_STALE = 70,		/* v2 v3 v4 */
+	NFSERR_REMOTE = 71,		/* v2 v3 */
+	NFSERR_WFLUSH = 99,		/* v2    */
+	NFSERR_BADHANDLE = 10001,	/*    v3 v4 */
+	NFSERR_NOT_SYNC = 10002,	/*    v3 */
+	NFSERR_BAD_COOKIE = 10003,	/*    v3 v4 */
+	NFSERR_NOTSUPP = 10004,		/*    v3 v4 */
+	NFSERR_TOOSMALL = 10005,	/*    v3 v4 */
+	NFSERR_SERVERFAULT = 10006,	/*    v3 v4 */
+	NFSERR_BADTYPE = 10007,		/*    v3 v4 */
+	NFSERR_JUKEBOX = 10008,		/*    v3 v4 */
+	NFSERR_SAME = 10009,		/*       v4 */
+	NFSERR_DENIED = 10010,		/*       v4 */
+	NFSERR_EXPIRED = 10011,		/*       v4 */
+	NFSERR_LOCKED = 10012,		/*       v4 */
+	NFSERR_GRACE = 10013,		/*       v4 */
+	NFSERR_FHEXPIRED = 10014,	/*       v4 */
+	NFSERR_SHARE_DENIED = 10015,	/*       v4 */
+	NFSERR_WRONGSEC = 10016,	/*       v4 */
+	NFSERR_CLID_INUSE = 10017,	/*       v4 */
+	NFSERR_RESOURCE = 10018,	/*       v4 */
+	NFSERR_MOVED = 10019,		/*       v4 */
+	NFSERR_NOFILEHANDLE = 10020,	/*       v4 */
+	NFSERR_MINOR_VERS_MISMATCH = 10021,   /* v4 */
+	NFSERR_STALE_CLIENTID = 10022,	/*       v4 */
+	NFSERR_STALE_STATEID = 10023,   /*       v4 */
+	NFSERR_OLD_STATEID = 10024,     /*       v4 */
+	NFSERR_BAD_STATEID = 10025,     /*       v4 */  
+	NFSERR_BAD_SEQID = 10026,	/*       v4 */
+	NFSERR_NOT_SAME = 10027,	/*       v4 */
+	NFSERR_LOCK_RANGE = 10028,	/*       v4 */
+	NFSERR_SYMLINK = 10029,		/*       v4 */
+	NFSERR_RESTOREFH = 10030,	/*       v4 */
+	NFSERR_LEASE_MOVED = 10031,	/*       v4 */
+	NFSERR_ATTRNOTSUPP = 10032,	/*       v4 */
+	NFSERR_NO_GRACE = 10033,	/*       v4 */
+	NFSERR_RECLAIM_BAD = 10034,	/*       v4 */
+	NFSERR_RECLAIM_CONFLICT = 10035,/*       v4 */
+	NFSERR_BAD_XDR = 10036,		/*       v4 */
+	NFSERR_LOCKS_HELD = 10037,	/*       v4 */
+	NFSERR_OPENMODE = 10038,       /*       v4 */
+	NFSERR_BADOWNER = 10039,       /*       v4 */
+	NFSERR_BADCHAR = 10040,        /*       v4 */
+	NFSERR_BADNAME = 10041,        /*       v4 */
+	NFSERR_BAD_RANGE = 10042,      /*       v4 */
+	NFSERR_LOCK_NOTSUPP = 10043,   /*       v4 */
+	NFSERR_OP_ILLEGAL = 10044,     /*       v4 */
+	NFSERR_DEADLOCK = 10045,       /*       v4 */
+	NFSERR_FILE_OPEN = 10046,      /*       v4 */
+	NFSERR_ADMIN_REVOKED = 10047,  /*       v4 */
+	NFSERR_CB_PATH_DOWN = 10048,   /*       v4 */
+};
+
+/* NFSv2 file types - beware, these are not the same in NFSv3 */
+
+enum nfs_ftype {
+	NFNON = 0,
+	NFREG = 1,
+	NFDIR = 2,
+	NFBLK = 3,
+	NFCHR = 4,
+	NFLNK = 5,
+	NFSOCK = 6,
+	NFBAD = 7,
+	NFFIFO = 8
+};
+
+#endif /* _UAPI_LINUX_NFS_H */
diff --git a/include/linux/nfs2.h b/include/uapi/linux/nfs2.h
similarity index 100%
rename from include/linux/nfs2.h
rename to include/uapi/linux/nfs2.h
diff --git a/include/uapi/linux/nfs3.h b/include/uapi/linux/nfs3.h
new file mode 100644
index 0000000..231ef4e
--- /dev/null
+++ b/include/uapi/linux/nfs3.h
@@ -0,0 +1,97 @@
+/*
+ * NFSv3 protocol definitions
+ */
+#ifndef _UAPI_LINUX_NFS3_H
+#define _UAPI_LINUX_NFS3_H
+
+#define NFS3_PORT		2049
+#define NFS3_MAXDATA		32768
+#define NFS3_MAXPATHLEN		PATH_MAX
+#define NFS3_MAXNAMLEN		NAME_MAX
+#define NFS3_MAXGROUPS		16
+#define NFS3_FHSIZE		64
+#define NFS3_COOKIESIZE		4
+#define NFS3_CREATEVERFSIZE	8
+#define NFS3_COOKIEVERFSIZE	8
+#define NFS3_WRITEVERFSIZE	8
+#define NFS3_FIFO_DEV		(-1)
+#define NFS3MODE_FMT		0170000
+#define NFS3MODE_DIR		0040000
+#define NFS3MODE_CHR		0020000
+#define NFS3MODE_BLK		0060000
+#define NFS3MODE_REG		0100000
+#define NFS3MODE_LNK		0120000
+#define NFS3MODE_SOCK		0140000
+#define NFS3MODE_FIFO		0010000
+
+/* Flags for access() call */
+#define NFS3_ACCESS_READ	0x0001
+#define NFS3_ACCESS_LOOKUP	0x0002
+#define NFS3_ACCESS_MODIFY	0x0004
+#define NFS3_ACCESS_EXTEND	0x0008
+#define NFS3_ACCESS_DELETE	0x0010
+#define NFS3_ACCESS_EXECUTE	0x0020
+#define NFS3_ACCESS_FULL	0x003f
+
+/* Flags for create mode */
+enum nfs3_createmode {
+	NFS3_CREATE_UNCHECKED = 0,
+	NFS3_CREATE_GUARDED = 1,
+	NFS3_CREATE_EXCLUSIVE = 2
+};
+
+/* NFSv3 file system properties */
+#define NFS3_FSF_LINK		0x0001
+#define NFS3_FSF_SYMLINK	0x0002
+#define NFS3_FSF_HOMOGENEOUS	0x0008
+#define NFS3_FSF_CANSETTIME	0x0010
+/* Some shorthands. See fs/nfsd/nfs3proc.c */
+#define NFS3_FSF_DEFAULT	0x001B
+#define NFS3_FSF_BILLYBOY	0x0018
+#define NFS3_FSF_READONLY	0x0008
+
+enum nfs3_ftype {
+	NF3NON  = 0,
+	NF3REG  = 1,
+	NF3DIR  = 2,
+	NF3BLK  = 3,
+	NF3CHR  = 4,
+	NF3LNK  = 5,
+	NF3SOCK = 6,
+	NF3FIFO = 7,	/* changed from NFSv2 (was 8) */
+	NF3BAD  = 8
+};
+
+struct nfs3_fh {
+	unsigned short size;
+	unsigned char  data[NFS3_FHSIZE];
+};
+
+#define NFS3_VERSION		3
+#define NFS3PROC_NULL		0
+#define NFS3PROC_GETATTR	1
+#define NFS3PROC_SETATTR	2
+#define NFS3PROC_LOOKUP		3
+#define NFS3PROC_ACCESS		4
+#define NFS3PROC_READLINK	5
+#define NFS3PROC_READ		6
+#define NFS3PROC_WRITE		7
+#define NFS3PROC_CREATE		8
+#define NFS3PROC_MKDIR		9
+#define NFS3PROC_SYMLINK	10
+#define NFS3PROC_MKNOD		11
+#define NFS3PROC_REMOVE		12
+#define NFS3PROC_RMDIR		13
+#define NFS3PROC_RENAME		14
+#define NFS3PROC_LINK		15
+#define NFS3PROC_READDIR	16
+#define NFS3PROC_READDIRPLUS	17
+#define NFS3PROC_FSSTAT		18
+#define NFS3PROC_FSINFO		19
+#define NFS3PROC_PATHCONF	20
+#define NFS3PROC_COMMIT		21
+
+#define NFS_MNT3_VERSION	3
+ 
+
+#endif /* _UAPI_LINUX_NFS3_H */
diff --git a/include/uapi/linux/nfs4.h b/include/uapi/linux/nfs4.h
new file mode 100644
index 0000000..788128e
--- /dev/null
+++ b/include/uapi/linux/nfs4.h
@@ -0,0 +1,178 @@
+/*
+ *  include/linux/nfs4.h
+ *
+ *  NFSv4 protocol definitions.
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Kendrick Smith <kmsmith@umich.edu>
+ *  Andy Adamson   <andros@umich.edu>
+ */
+
+#ifndef _UAPI_LINUX_NFS4_H
+#define _UAPI_LINUX_NFS4_H
+
+#include <linux/types.h>
+
+#define NFS4_BITMAP_SIZE	2
+#define NFS4_VERIFIER_SIZE	8
+#define NFS4_STATEID_SEQID_SIZE 4
+#define NFS4_STATEID_OTHER_SIZE 12
+#define NFS4_STATEID_SIZE	(NFS4_STATEID_SEQID_SIZE + NFS4_STATEID_OTHER_SIZE)
+#define NFS4_FHSIZE		128
+#define NFS4_MAXPATHLEN		PATH_MAX
+#define NFS4_MAXNAMLEN		NAME_MAX
+#define NFS4_OPAQUE_LIMIT	1024
+#define NFS4_MAX_SESSIONID_LEN	16
+
+#define NFS4_ACCESS_READ        0x0001
+#define NFS4_ACCESS_LOOKUP      0x0002
+#define NFS4_ACCESS_MODIFY      0x0004
+#define NFS4_ACCESS_EXTEND      0x0008
+#define NFS4_ACCESS_DELETE      0x0010
+#define NFS4_ACCESS_EXECUTE     0x0020
+
+#define NFS4_FH_PERSISTENT		0x0000
+#define NFS4_FH_NOEXPIRE_WITH_OPEN	0x0001
+#define NFS4_FH_VOLATILE_ANY		0x0002
+#define NFS4_FH_VOL_MIGRATION		0x0004
+#define NFS4_FH_VOL_RENAME		0x0008
+
+#define NFS4_OPEN_RESULT_CONFIRM 0x0002
+#define NFS4_OPEN_RESULT_LOCKTYPE_POSIX 0x0004
+
+#define NFS4_SHARE_ACCESS_MASK	0x000F
+#define NFS4_SHARE_ACCESS_READ	0x0001
+#define NFS4_SHARE_ACCESS_WRITE	0x0002
+#define NFS4_SHARE_ACCESS_BOTH	0x0003
+#define NFS4_SHARE_DENY_READ	0x0001
+#define NFS4_SHARE_DENY_WRITE	0x0002
+#define NFS4_SHARE_DENY_BOTH	0x0003
+
+/* nfs41 */
+#define NFS4_SHARE_WANT_MASK		0xFF00
+#define NFS4_SHARE_WANT_NO_PREFERENCE	0x0000
+#define NFS4_SHARE_WANT_READ_DELEG	0x0100
+#define NFS4_SHARE_WANT_WRITE_DELEG	0x0200
+#define NFS4_SHARE_WANT_ANY_DELEG	0x0300
+#define NFS4_SHARE_WANT_NO_DELEG	0x0400
+#define NFS4_SHARE_WANT_CANCEL		0x0500
+
+#define NFS4_SHARE_WHEN_MASK		0xF0000
+#define NFS4_SHARE_SIGNAL_DELEG_WHEN_RESRC_AVAIL	0x10000
+#define NFS4_SHARE_PUSH_DELEG_WHEN_UNCONTENDED		0x20000
+
+#define NFS4_CDFC4_FORE	0x1
+#define NFS4_CDFC4_BACK 0x2
+#define NFS4_CDFC4_BOTH 0x3
+#define NFS4_CDFC4_FORE_OR_BOTH 0x3
+#define NFS4_CDFC4_BACK_OR_BOTH 0x7
+
+#define NFS4_CDFS4_FORE 0x1
+#define NFS4_CDFS4_BACK 0x2
+#define NFS4_CDFS4_BOTH 0x3
+
+#define NFS4_SET_TO_SERVER_TIME	0
+#define NFS4_SET_TO_CLIENT_TIME	1
+
+#define NFS4_ACE_ACCESS_ALLOWED_ACE_TYPE 0
+#define NFS4_ACE_ACCESS_DENIED_ACE_TYPE  1
+#define NFS4_ACE_SYSTEM_AUDIT_ACE_TYPE   2
+#define NFS4_ACE_SYSTEM_ALARM_ACE_TYPE   3
+
+#define ACL4_SUPPORT_ALLOW_ACL 0x01
+#define ACL4_SUPPORT_DENY_ACL  0x02
+#define ACL4_SUPPORT_AUDIT_ACL 0x04
+#define ACL4_SUPPORT_ALARM_ACL 0x08
+
+#define NFS4_ACE_FILE_INHERIT_ACE             0x00000001
+#define NFS4_ACE_DIRECTORY_INHERIT_ACE        0x00000002
+#define NFS4_ACE_NO_PROPAGATE_INHERIT_ACE     0x00000004
+#define NFS4_ACE_INHERIT_ONLY_ACE             0x00000008
+#define NFS4_ACE_SUCCESSFUL_ACCESS_ACE_FLAG   0x00000010
+#define NFS4_ACE_FAILED_ACCESS_ACE_FLAG       0x00000020
+#define NFS4_ACE_IDENTIFIER_GROUP             0x00000040
+
+#define NFS4_ACE_READ_DATA                    0x00000001
+#define NFS4_ACE_LIST_DIRECTORY               0x00000001
+#define NFS4_ACE_WRITE_DATA                   0x00000002
+#define NFS4_ACE_ADD_FILE                     0x00000002
+#define NFS4_ACE_APPEND_DATA                  0x00000004
+#define NFS4_ACE_ADD_SUBDIRECTORY             0x00000004
+#define NFS4_ACE_READ_NAMED_ATTRS             0x00000008
+#define NFS4_ACE_WRITE_NAMED_ATTRS            0x00000010
+#define NFS4_ACE_EXECUTE                      0x00000020
+#define NFS4_ACE_DELETE_CHILD                 0x00000040
+#define NFS4_ACE_READ_ATTRIBUTES              0x00000080
+#define NFS4_ACE_WRITE_ATTRIBUTES             0x00000100
+#define NFS4_ACE_DELETE                       0x00010000
+#define NFS4_ACE_READ_ACL                     0x00020000
+#define NFS4_ACE_WRITE_ACL                    0x00040000
+#define NFS4_ACE_WRITE_OWNER                  0x00080000
+#define NFS4_ACE_SYNCHRONIZE                  0x00100000
+#define NFS4_ACE_GENERIC_READ                 0x00120081
+#define NFS4_ACE_GENERIC_WRITE                0x00160106
+#define NFS4_ACE_GENERIC_EXECUTE              0x001200A0
+#define NFS4_ACE_MASK_ALL                     0x001F01FF
+
+#define EXCHGID4_FLAG_SUPP_MOVED_REFER		0x00000001
+#define EXCHGID4_FLAG_SUPP_MOVED_MIGR		0x00000002
+#define EXCHGID4_FLAG_BIND_PRINC_STATEID	0x00000100
+
+#define EXCHGID4_FLAG_USE_NON_PNFS		0x00010000
+#define EXCHGID4_FLAG_USE_PNFS_MDS		0x00020000
+#define EXCHGID4_FLAG_USE_PNFS_DS		0x00040000
+#define EXCHGID4_FLAG_MASK_PNFS			0x00070000
+
+#define EXCHGID4_FLAG_UPD_CONFIRMED_REC_A	0x40000000
+#define EXCHGID4_FLAG_CONFIRMED_R		0x80000000
+/*
+ * Since the validity of these bits depends on whether
+ * they're set in the argument or response, have separate
+ * invalid flag masks for arg (_A) and resp (_R).
+ */
+#define EXCHGID4_FLAG_MASK_A			0x40070103
+#define EXCHGID4_FLAG_MASK_R			0x80070103
+
+#define SEQ4_STATUS_CB_PATH_DOWN		0x00000001
+#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRING	0x00000002
+#define SEQ4_STATUS_CB_GSS_CONTEXTS_EXPIRED	0x00000004
+#define SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED	0x00000008
+#define SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED	0x00000010
+#define SEQ4_STATUS_ADMIN_STATE_REVOKED		0x00000020
+#define SEQ4_STATUS_RECALLABLE_STATE_REVOKED	0x00000040
+#define SEQ4_STATUS_LEASE_MOVED			0x00000080
+#define SEQ4_STATUS_RESTART_RECLAIM_NEEDED	0x00000100
+#define SEQ4_STATUS_CB_PATH_DOWN_SESSION	0x00000200
+#define SEQ4_STATUS_BACKCHANNEL_FAULT		0x00000400
+
+#define NFS4_SECINFO_STYLE4_CURRENT_FH	0
+#define NFS4_SECINFO_STYLE4_PARENT	1
+
+#define NFS4_MAX_UINT64	(~(u64)0)
+
+/* An NFS4 sessions server must support at least NFS4_MAX_OPS operations.
+ * If a compound requires more operations, adjust NFS4_MAX_OPS accordingly.
+ */
+#define NFS4_MAX_OPS   8
+
+/* Our NFS4 client back channel server only wants the cb_sequene and the
+ * actual operation per compound
+ */
+#define NFS4_MAX_BACK_CHANNEL_OPS 2
+
+enum nfs4_acl_whotype {
+	NFS4_ACL_WHO_NAMED = 0,
+	NFS4_ACL_WHO_OWNER,
+	NFS4_ACL_WHO_GROUP,
+	NFS4_ACL_WHO_EVERYONE,
+};
+
+#endif /* _UAPI_LINUX_NFS4_H */
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ * End:
+ */
diff --git a/include/linux/nfs4_mount.h b/include/uapi/linux/nfs4_mount.h
similarity index 100%
rename from include/linux/nfs4_mount.h
rename to include/uapi/linux/nfs4_mount.h
diff --git a/include/uapi/linux/nfs_fs.h b/include/uapi/linux/nfs_fs.h
new file mode 100644
index 0000000..4914228
--- /dev/null
+++ b/include/uapi/linux/nfs_fs.h
@@ -0,0 +1,61 @@
+/*
+ *  linux/include/linux/nfs_fs.h
+ *
+ *  Copyright (C) 1992  Rick Sladkey
+ *
+ *  OS-specific nfs filesystem definitions and declarations
+ */
+
+#ifndef _UAPI_LINUX_NFS_FS_H
+#define _UAPI_LINUX_NFS_FS_H
+
+#include <linux/magic.h>
+
+/* Default timeout values */
+#define NFS_DEF_UDP_TIMEO	(11)
+#define NFS_DEF_UDP_RETRANS	(3)
+#define NFS_DEF_TCP_TIMEO	(600)
+#define NFS_DEF_TCP_RETRANS	(2)
+
+#define NFS_MAX_UDP_TIMEOUT	(60*HZ)
+#define NFS_MAX_TCP_TIMEOUT	(600*HZ)
+
+#define NFS_DEF_ACREGMIN	(3)
+#define NFS_DEF_ACREGMAX	(60)
+#define NFS_DEF_ACDIRMIN	(30)
+#define NFS_DEF_ACDIRMAX	(60)
+
+/*
+ * When flushing a cluster of dirty pages, there can be different
+ * strategies:
+ */
+#define FLUSH_SYNC		1	/* file being synced, or contention */
+#define FLUSH_STABLE		4	/* commit to stable storage */
+#define FLUSH_LOWPRI		8	/* low priority background flush */
+#define FLUSH_HIGHPRI		16	/* high priority memory reclaim flush */
+#define FLUSH_COND_STABLE	32	/* conditional stable write - only stable
+					 * if everything fits in one RPC */
+
+
+/*
+ * NFS debug flags
+ */
+#define NFSDBG_VFS		0x0001
+#define NFSDBG_DIRCACHE		0x0002
+#define NFSDBG_LOOKUPCACHE	0x0004
+#define NFSDBG_PAGECACHE	0x0008
+#define NFSDBG_PROC		0x0010
+#define NFSDBG_XDR		0x0020
+#define NFSDBG_FILE		0x0040
+#define NFSDBG_ROOT		0x0080
+#define NFSDBG_CALLBACK		0x0100
+#define NFSDBG_CLIENT		0x0200
+#define NFSDBG_MOUNT		0x0400
+#define NFSDBG_FSCACHE		0x0800
+#define NFSDBG_PNFS		0x1000
+#define NFSDBG_PNFS_LD		0x2000
+#define NFSDBG_STATE		0x4000
+#define NFSDBG_ALL		0xFFFF
+
+
+#endif /* _UAPI_LINUX_NFS_FS_H */
diff --git a/include/uapi/linux/nfs_idmap.h b/include/uapi/linux/nfs_idmap.h
new file mode 100644
index 0000000..8d4b1c7
--- /dev/null
+++ b/include/uapi/linux/nfs_idmap.h
@@ -0,0 +1,65 @@
+/*
+ * include/linux/nfs_idmap.h
+ *
+ *  UID and GID to name mapping for clients.
+ *
+ *  Copyright (c) 2002 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Marius Aamodt Eriksen <marius@umich.edu>
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the University nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _UAPINFS_IDMAP_H
+#define _UAPINFS_IDMAP_H
+
+#include <linux/types.h>
+
+/* XXX from bits/utmp.h  */
+#define IDMAP_NAMESZ  128
+
+#define IDMAP_TYPE_USER  0
+#define IDMAP_TYPE_GROUP 1
+
+#define IDMAP_CONV_IDTONAME 0
+#define IDMAP_CONV_NAMETOID 1
+
+#define IDMAP_STATUS_INVALIDMSG 0x01
+#define IDMAP_STATUS_AGAIN      0x02
+#define IDMAP_STATUS_LOOKUPFAIL 0x04
+#define IDMAP_STATUS_SUCCESS    0x08
+
+struct idmap_msg {
+	__u8  im_type;
+	__u8  im_conv;
+	char  im_name[IDMAP_NAMESZ];
+	__u32 im_id;
+	__u8  im_status;
+};
+
+
+#endif /* _UAPINFS_IDMAP_H */
diff --git a/include/linux/nfs_mount.h b/include/uapi/linux/nfs_mount.h
similarity index 100%
rename from include/linux/nfs_mount.h
rename to include/uapi/linux/nfs_mount.h
diff --git a/include/uapi/linux/nfsacl.h b/include/uapi/linux/nfsacl.h
new file mode 100644
index 0000000..9bb9771
--- /dev/null
+++ b/include/uapi/linux/nfsacl.h
@@ -0,0 +1,29 @@
+/*
+ * File: linux/nfsacl.h
+ *
+ * (C) 2003 Andreas Gruenbacher <agruen@suse.de>
+ */
+#ifndef _UAPI__LINUX_NFSACL_H
+#define _UAPI__LINUX_NFSACL_H
+
+#define NFS_ACL_PROGRAM	100227
+
+#define ACLPROC2_GETACL		1
+#define ACLPROC2_SETACL		2
+#define ACLPROC2_GETATTR	3
+#define ACLPROC2_ACCESS		4
+
+#define ACLPROC3_GETACL		1
+#define ACLPROC3_SETACL		2
+
+
+/* Flags for the getacl/setacl mode */
+#define NFS_ACL			0x0001
+#define NFS_ACLCNT		0x0002
+#define NFS_DFACL		0x0004
+#define NFS_DFACLCNT		0x0008
+
+/* Flag for Default ACL entries */
+#define NFS_ACL_DEFAULT		0x1000
+
+#endif /* _UAPI__LINUX_NFSACL_H */
diff --git a/include/uapi/linux/nfsd/Kbuild b/include/uapi/linux/nfsd/Kbuild
index aafaa5a..c11bc40 100644
--- a/include/uapi/linux/nfsd/Kbuild
+++ b/include/uapi/linux/nfsd/Kbuild
@@ -1 +1,6 @@
 # UAPI Header export list
+header-y += cld.h
+header-y += debug.h
+header-y += export.h
+header-y += nfsfh.h
+header-y += stats.h
diff --git a/include/linux/nfsd/cld.h b/include/uapi/linux/nfsd/cld.h
similarity index 100%
rename from include/linux/nfsd/cld.h
rename to include/uapi/linux/nfsd/cld.h
diff --git a/include/uapi/linux/nfsd/debug.h b/include/uapi/linux/nfsd/debug.h
new file mode 100644
index 0000000..a6f453c
--- /dev/null
+++ b/include/uapi/linux/nfsd/debug.h
@@ -0,0 +1,40 @@
+/*
+ * linux/include/linux/nfsd/debug.h
+ *
+ * Debugging-related stuff for nfsd
+ *
+ * Copyright (C) 1995 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _UAPILINUX_NFSD_DEBUG_H
+#define _UAPILINUX_NFSD_DEBUG_H
+
+#include <linux/sunrpc/debug.h>
+
+/*
+ * Enable debugging for nfsd.
+ * Requires RPC_DEBUG.
+ */
+#ifdef RPC_DEBUG
+# define NFSD_DEBUG		1
+#endif
+
+/*
+ * knfsd debug flags
+ */
+#define NFSDDBG_SOCK		0x0001
+#define NFSDDBG_FH		0x0002
+#define NFSDDBG_EXPORT		0x0004
+#define NFSDDBG_SVC		0x0008
+#define NFSDDBG_PROC		0x0010
+#define NFSDDBG_FILEOP		0x0020
+#define NFSDDBG_AUTH		0x0040
+#define NFSDDBG_REPCACHE	0x0080
+#define NFSDDBG_XDR		0x0100
+#define NFSDDBG_LOCKD		0x0200
+#define NFSDDBG_ALL		0x7FFF
+#define NFSDDBG_NOCHANGE	0xFFFF
+
+
+
+#endif /* _UAPILINUX_NFSD_DEBUG_H */
diff --git a/include/uapi/linux/nfsd/export.h b/include/uapi/linux/nfsd/export.h
new file mode 100644
index 0000000..cf47c31
--- /dev/null
+++ b/include/uapi/linux/nfsd/export.h
@@ -0,0 +1,58 @@
+/*
+ * include/linux/nfsd/export.h
+ * 
+ * Public declarations for NFS exports. The definitions for the
+ * syscall interface are in nfsctl.h
+ *
+ * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _UAPINFSD_EXPORT_H
+#define _UAPINFSD_EXPORT_H
+
+# include <linux/types.h>
+
+/*
+ * Important limits for the exports stuff.
+ */
+#define NFSCLNT_IDMAX		1024
+#define NFSCLNT_ADDRMAX		16
+#define NFSCLNT_KEYMAX		32
+
+/*
+ * Export flags.
+ */
+#define NFSEXP_READONLY		0x0001
+#define NFSEXP_INSECURE_PORT	0x0002
+#define NFSEXP_ROOTSQUASH	0x0004
+#define NFSEXP_ALLSQUASH	0x0008
+#define NFSEXP_ASYNC		0x0010
+#define NFSEXP_GATHERED_WRITES	0x0020
+/* 40 80 100 currently unused */
+#define NFSEXP_NOHIDE		0x0200
+#define NFSEXP_NOSUBTREECHECK	0x0400
+#define	NFSEXP_NOAUTHNLM	0x0800		/* Don't authenticate NLM requests - just trust */
+#define NFSEXP_MSNFS		0x1000	/* do silly things that MS clients expect; no longer supported */
+#define NFSEXP_FSID		0x2000
+#define	NFSEXP_CROSSMOUNT	0x4000
+#define	NFSEXP_NOACL		0x8000	/* reserved for possible ACL related use */
+/*
+ * The NFSEXP_V4ROOT flag causes the kernel to give access only to NFSv4
+ * clients, and only to the single directory that is the root of the
+ * export; further lookup and readdir operations are treated as if every
+ * subdirectory was a mountpoint, and ignored if they are not themselves
+ * exported.  This is used by nfsd and mountd to construct the NFSv4
+ * pseudofilesystem, which provides access only to paths leading to each
+ * exported filesystem.
+ */
+#define	NFSEXP_V4ROOT		0x10000
+/* All flags that we claim to support.  (Note we don't support NOACL.) */
+#define NFSEXP_ALLFLAGS		0x17E3F
+
+/* The flags that may vary depending on security flavor: */
+#define NFSEXP_SECINFO_FLAGS	(NFSEXP_READONLY | NFSEXP_ROOTSQUASH \
+					| NFSEXP_ALLSQUASH \
+					| NFSEXP_INSECURE_PORT)
+
+
+#endif /* _UAPINFSD_EXPORT_H */
diff --git a/include/uapi/linux/nfsd/nfsfh.h b/include/uapi/linux/nfsd/nfsfh.h
new file mode 100644
index 0000000..616e3b3
--- /dev/null
+++ b/include/uapi/linux/nfsd/nfsfh.h
@@ -0,0 +1,122 @@
+/*
+ * include/linux/nfsd/nfsfh.h
+ *
+ * This file describes the layout of the file handles as passed
+ * over the wire.
+ *
+ * Earlier versions of knfsd used to sign file handles using keyed MD5
+ * or SHA. I've removed this code, because it doesn't give you more
+ * security than blocking external access to port 2049 on your firewall.
+ *
+ * Copyright (C) 1995, 1996, 1997 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _UAPI_LINUX_NFSD_FH_H
+#define _UAPI_LINUX_NFSD_FH_H
+
+#include <linux/types.h>
+#include <linux/nfs.h>
+#include <linux/nfs2.h>
+#include <linux/nfs3.h>
+#include <linux/nfs4.h>
+
+/*
+ * This is the old "dentry style" Linux NFSv2 file handle.
+ *
+ * The xino and xdev fields are currently used to transport the
+ * ino/dev of the exported inode.
+ */
+struct nfs_fhbase_old {
+	__u32		fb_dcookie;	/* dentry cookie - always 0xfeebbaca */
+	__u32		fb_ino;		/* our inode number */
+	__u32		fb_dirino;	/* dir inode number, 0 for directories */
+	__u32		fb_dev;		/* our device */
+	__u32		fb_xdev;
+	__u32		fb_xino;
+	__u32		fb_generation;
+};
+
+/*
+ * This is the new flexible, extensible style NFSv2/v3 file handle.
+ * by Neil Brown <neilb@cse.unsw.edu.au> - March 2000
+ *
+ * The file handle starts with a sequence of four-byte words.
+ * The first word contains a version number (1) and three descriptor bytes
+ * that tell how the remaining 3 variable length fields should be handled.
+ * These three bytes are auth_type, fsid_type and fileid_type.
+ *
+ * All four-byte values are in host-byte-order.
+ *
+ * The auth_type field specifies how the filehandle can be authenticated
+ * This might allow a file to be confirmed to be in a writable part of a
+ * filetree without checking the path from it up to the root.
+ * Current values:
+ *     0  - No authentication.  fb_auth is 0 bytes long
+ * Possible future values:
+ *     1  - 4 bytes taken from MD5 hash of the remainer of the file handle
+ *          prefixed by a secret and with the important export flags.
+ *
+ * The fsid_type identifies how the filesystem (or export point) is
+ *    encoded.
+ *  Current values:
+ *     0  - 4 byte device id (ms-2-bytes major, ls-2-bytes minor), 4byte inode number
+ *        NOTE: we cannot use the kdev_t device id value, because kdev_t.h
+ *              says we mustn't.  We must break it up and reassemble.
+ *     1  - 4 byte user specified identifier
+ *     2  - 4 byte major, 4 byte minor, 4 byte inode number - DEPRECATED
+ *     3  - 4 byte device id, encoded for user-space, 4 byte inode number
+ *     4  - 4 byte inode number and 4 byte uuid
+ *     5  - 8 byte uuid
+ *     6  - 16 byte uuid
+ *     7  - 8 byte inode number and 16 byte uuid
+ *
+ * The fileid_type identified how the file within the filesystem is encoded.
+ * This is (will be) passed to, and set by, the underlying filesystem if it supports
+ * filehandle operations.  The filesystem must not use the value '0' or '0xff' and may
+ * only use the values 1 and 2 as defined below:
+ *  Current values:
+ *    0   - The root, or export point, of the filesystem.  fb_fileid is 0 bytes.
+ *    1   - 32bit inode number, 32 bit generation number.
+ *    2   - 32bit inode number, 32 bit generation number, 32 bit parent directory inode number.
+ *
+ */
+struct nfs_fhbase_new {
+	__u8		fb_version;	/* == 1, even => nfs_fhbase_old */
+	__u8		fb_auth_type;
+	__u8		fb_fsid_type;
+	__u8		fb_fileid_type;
+	__u32		fb_auth[1];
+/*	__u32		fb_fsid[0]; floating */
+/*	__u32		fb_fileid[0]; floating */
+};
+
+struct knfsd_fh {
+	unsigned int	fh_size;	/* significant for NFSv3.
+					 * Points to the current size while building
+					 * a new file handle
+					 */
+	union {
+		struct nfs_fhbase_old	fh_old;
+		__u32			fh_pad[NFS4_FHSIZE/4];
+		struct nfs_fhbase_new	fh_new;
+	} fh_base;
+};
+
+#define ofh_dcookie		fh_base.fh_old.fb_dcookie
+#define ofh_ino			fh_base.fh_old.fb_ino
+#define ofh_dirino		fh_base.fh_old.fb_dirino
+#define ofh_dev			fh_base.fh_old.fb_dev
+#define ofh_xdev		fh_base.fh_old.fb_xdev
+#define ofh_xino		fh_base.fh_old.fb_xino
+#define ofh_generation		fh_base.fh_old.fb_generation
+
+#define	fh_version		fh_base.fh_new.fb_version
+#define	fh_fsid_type		fh_base.fh_new.fb_fsid_type
+#define	fh_auth_type		fh_base.fh_new.fb_auth_type
+#define	fh_fileid_type		fh_base.fh_new.fb_fileid_type
+#define	fh_auth			fh_base.fh_new.fb_auth
+#define	fh_fsid			fh_base.fh_new.fb_auth
+
+
+
+#endif /* _UAPI_LINUX_NFSD_FH_H */
diff --git a/include/uapi/linux/nfsd/stats.h b/include/uapi/linux/nfsd/stats.h
new file mode 100644
index 0000000..9fb7a06
--- /dev/null
+++ b/include/uapi/linux/nfsd/stats.h
@@ -0,0 +1,17 @@
+/*
+ * linux/include/linux/nfsd/stats.h
+ *
+ * Statistics for NFS server.
+ *
+ * Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _UAPILINUX_NFSD_STATS_H
+#define _UAPILINUX_NFSD_STATS_H
+
+#include <linux/nfs4.h>
+
+/* thread usage wraps very million seconds (approx one fortnight) */
+#define	NFSD_USAGE_WRAP	(HZ*1000000)
+
+#endif /* _UAPILINUX_NFSD_STATS_H */
diff --git a/include/linux/nl80211.h b/include/uapi/linux/nl80211.h
similarity index 100%
rename from include/linux/nl80211.h
rename to include/uapi/linux/nl80211.h
diff --git a/include/uapi/linux/nubus.h b/include/uapi/linux/nubus.h
new file mode 100644
index 0000000..77513d2
--- /dev/null
+++ b/include/uapi/linux/nubus.h
@@ -0,0 +1,244 @@
+/*
+  nubus.h: various definitions and prototypes for NuBus drivers to use.
+
+  Originally written by Alan Cox.
+
+  Hacked to death by C. Scott Ananian and David Huggins-Daines.
+  
+  Some of the constants in here are from the corresponding
+  NetBSD/OpenBSD header file, by Allen Briggs.  We figured out the
+  rest of them on our own. */
+
+#ifndef _UAPILINUX_NUBUS_H
+#define _UAPILINUX_NUBUS_H
+
+#include <linux/types.h>
+
+enum nubus_category {
+	NUBUS_CAT_BOARD          = 0x0001,
+	NUBUS_CAT_DISPLAY        = 0x0003,
+	NUBUS_CAT_NETWORK        = 0x0004,
+	NUBUS_CAT_COMMUNICATIONS = 0x0006,
+	NUBUS_CAT_FONT           = 0x0009,
+	NUBUS_CAT_CPU            = 0x000A,
+	/* For lack of a better name */
+	NUBUS_CAT_DUODOCK        = 0x0020
+};
+
+enum nubus_type_network {
+	NUBUS_TYPE_ETHERNET      = 0x0001,
+	NUBUS_TYPE_RS232         = 0x0002
+};
+
+enum nubus_type_display {
+	NUBUS_TYPE_VIDEO         = 0x0001
+};
+
+enum nubus_type_cpu {
+	NUBUS_TYPE_68020         = 0x0003,
+	NUBUS_TYPE_68030         = 0x0004,
+	NUBUS_TYPE_68040         = 0x0005
+};
+
+/* Known <Cat,Type,SW,HW> tuples: (according to TattleTech and Slots)
+ *  68030 motherboards: <10,4,0,24>
+ *  68040 motherboards: <10,5,0,24>
+ *  DuoDock Plus: <32,1,1,2>
+ *
+ *  Toby Frame Buffer card: <3,1,1,1>
+ *  RBV built-in video (IIci): <3,1,1,24>
+ *  Valkyrie built-in video (Q630): <3,1,1,46>
+ *  Macintosh Display Card: <3,1,1,25>
+ *  Sonora built-in video (P460): <3,1,1,34>
+ *  Jet framebuffer (DuoDock Plus): <3,1,1,41>
+ *
+ *  SONIC comm-slot/on-board and DuoDock Ethernet: <4,1,1,272>
+ *  SONIC LC-PDS Ethernet (Dayna, but like Apple 16-bit, sort of): <4,1,1,271>
+ *  Apple SONIC LC-PDS Ethernet ("Apple Ethernet LC Twisted-Pair Card"): <4,1,0,281>
+ *  Sonic Systems Ethernet A-Series Card: <4,1,268,256>
+ *  Asante MacCon NuBus-A: <4,1,260,256> (alpha-1.0,1.1 revision)
+ *   ROM on the above card: <2,1,0,0>
+ *  Cabletron ethernet card: <4,1,1,265>
+ *  Farallon ethernet card: <4,1,268,256> (identical to Sonic Systems card)
+ *  Kinetics EtherPort IIN: <4,1,259,262>
+ *  API Engineering EtherRun_LCa PDS enet card: <4,1,282,256>
+ *
+ *  Add your devices to the list!  You can obtain the "Slots" utility
+ *  from Apple's FTP site at:
+ *  ftp://dev.apple.com/devworld/Tool_Chest/Devices_-_Hardware/NuBus_Slot_Manager/
+ *
+ *  Alternately, TattleTech can be found at any Info-Mac mirror site.  
+ *  or from its distribution site: ftp://ftp.decismkr.com/dms
+ */
+
+/* DrSW: Uniquely identifies the software interface to a board.  This
+   is usually the one you want to look at when writing a driver.  It's
+   not as useful as you think, though, because as we should know by
+   now (duh), "Apple Compatible" can mean a lot of things... */
+
+/* Add known DrSW values here */
+enum nubus_drsw {
+	/* NUBUS_CAT_DISPLAY */
+	NUBUS_DRSW_APPLE        = 0x0001,
+	NUBUS_DRSW_APPLE_HIRES  = 0x0013, /* MacII HiRes card driver */
+	
+	/* NUBUS_CAT_NETWORK */
+	NUBUS_DRSW_3COM         = 0x0000,
+	NUBUS_DRSW_CABLETRON    = 0x0001,
+	NUBUS_DRSW_SONIC_LC     = 0x0001,
+	NUBUS_DRSW_KINETICS     = 0x0103,
+	NUBUS_DRSW_ASANTE       = 0x0104,
+	NUBUS_DRSW_TECHWORKS    = 0x0109,
+	NUBUS_DRSW_DAYNA        = 0x010b,
+	NUBUS_DRSW_FARALLON     = 0x010c,
+	NUBUS_DRSW_APPLE_SN     = 0x010f,
+	NUBUS_DRSW_DAYNA2       = 0x0115,
+	NUBUS_DRSW_FOCUS        = 0x011a,
+	NUBUS_DRSW_ASANTE_CS    = 0x011d, /* use asante SMC9194 driver */
+	NUBUS_DRSW_DAYNA_LC     = 0x011e,
+
+	/* NUBUS_CAT_CPU */
+	NUBUS_DRSW_NONE         = 0x0000,
+};
+
+/* DrHW: Uniquely identifies the hardware interface to a board (or at
+   least, it should...  some video cards are known to incorrectly
+   identify themselves as Toby cards) */
+
+/* Add known DrHW values here */
+enum nubus_drhw {
+	/* NUBUS_CAT_DISPLAY */
+	NUBUS_DRHW_APPLE_TFB      = 0x0001, /* Toby frame buffer card */
+	NUBUS_DRHW_APPLE_WVC      = 0x0006, /* Apple Workstation Video Card */
+	NUBUS_DRHW_SIGMA_CLRMAX   = 0x0007, /* Sigma Design ColorMax */
+	NUBUS_DRHW_APPLE_SE30     = 0x0009, /* Apple SE/30 video */
+	NUBUS_DRHW_APPLE_HRVC     = 0x0013, /* Mac II High-Res Video Card */
+	NUBUS_DRHW_APPLE_PVC      = 0x0017, /* Mac II Portrait Video Card */
+	NUBUS_DRHW_APPLE_RBV1     = 0x0018, /* IIci RBV video */
+	NUBUS_DRHW_APPLE_MDC      = 0x0019, /* Macintosh Display Card */
+	NUBUS_DRHW_APPLE_SONORA   = 0x0022, /* Sonora built-in video */
+	NUBUS_DRHW_APPLE_24AC     = 0x002b, /* Mac 24AC Video Card */
+	NUBUS_DRHW_APPLE_VALKYRIE = 0x002e,
+	NUBUS_DRHW_APPLE_JET      = 0x0029, /* Jet framebuffer (DuoDock) */
+	NUBUS_DRHW_SMAC_GFX       = 0x0105, /* SuperMac GFX */
+	NUBUS_DRHW_RASTER_CB264   = 0x013B, /* RasterOps ColorBoard 264 */
+	NUBUS_DRHW_MICRON_XCEED   = 0x0146, /* Micron Exceed color */
+	NUBUS_DRHW_RDIUS_GSC      = 0x0153, /* Radius GS/C */
+	NUBUS_DRHW_SMAC_SPEC8     = 0x017B, /* SuperMac Spectrum/8 */
+	NUBUS_DRHW_SMAC_SPEC24    = 0x017C, /* SuperMac Spectrum/24 */
+	NUBUS_DRHW_RASTER_CB364   = 0x026F, /* RasterOps ColorBoard 364 */
+	NUBUS_DRHW_RDIUS_DCGX     = 0x027C, /* Radius DirectColor/GX */
+	NUBUS_DRHW_RDIUS_PC8      = 0x0291, /* Radius PrecisionColor 8 */
+	NUBUS_DRHW_LAPIS_PCS8     = 0x0292, /* Lapis ProColorServer 8 */
+	NUBUS_DRHW_RASTER_24XLI   = 0x02A0, /* RasterOps 8/24 XLi */
+	NUBUS_DRHW_RASTER_PBPGT   = 0x02A5, /* RasterOps PaintBoard Prism GT */
+	NUBUS_DRHW_EMACH_FSX      = 0x02AE, /* E-Machines Futura SX */
+	NUBUS_DRHW_RASTER_24XLTV  = 0x02B7, /* RasterOps 24XLTV */
+	NUBUS_DRHW_SMAC_THUND24   = 0x02CB, /* SuperMac Thunder/24 */
+	NUBUS_DRHW_SMAC_THUNDLGHT = 0x03D9, /* SuperMac ThunderLight */
+	NUBUS_DRHW_RDIUS_PC24XP   = 0x0406, /* Radius PrecisionColor 24Xp */
+	NUBUS_DRHW_RDIUS_PC24X    = 0x040A, /* Radius PrecisionColor 24X */
+	NUBUS_DRHW_RDIUS_PC8XJ    = 0x040B, /* Radius PrecisionColor 8XJ */
+	
+	/* NUBUS_CAT_NETWORK */
+	NUBUS_DRHW_INTERLAN       = 0x0100,
+	NUBUS_DRHW_SMC9194        = 0x0101,
+	NUBUS_DRHW_KINETICS       = 0x0106,
+	NUBUS_DRHW_CABLETRON      = 0x0109,
+	NUBUS_DRHW_ASANTE_LC      = 0x010f,
+	NUBUS_DRHW_SONIC          = 0x0110,
+	NUBUS_DRHW_TECHWORKS      = 0x0112,
+	NUBUS_DRHW_APPLE_SONIC_NB = 0x0118,
+	NUBUS_DRHW_APPLE_SONIC_LC = 0x0119,
+	NUBUS_DRHW_FOCUS          = 0x011c,
+	NUBUS_DRHW_SONNET         = 0x011d,
+};
+
+/* Resource IDs: These are the identifiers for the various weird and
+   wonderful tidbits of information that may or may not reside in the
+   NuBus ROM directory. */
+enum nubus_res_id {
+	NUBUS_RESID_TYPE         = 0x0001,
+	NUBUS_RESID_NAME         = 0x0002,
+	NUBUS_RESID_ICON         = 0x0003,
+	NUBUS_RESID_DRVRDIR      = 0x0004,
+	NUBUS_RESID_LOADREC      = 0x0005,
+	NUBUS_RESID_BOOTREC      = 0x0006,
+	NUBUS_RESID_FLAGS        = 0x0007,
+	NUBUS_RESID_HWDEVID      = 0x0008,
+	NUBUS_RESID_MINOR_BASEOS = 0x000a,
+	NUBUS_RESID_MINOR_LENGTH = 0x000b,
+	NUBUS_RESID_MAJOR_BASEOS = 0x000c,
+	NUBUS_RESID_MAJOR_LENGTH = 0x000d,
+	NUBUS_RESID_CICN         = 0x000f,
+	NUBUS_RESID_ICL8         = 0x0010,
+	NUBUS_RESID_ICL4         = 0x0011,
+};
+
+/* Category-specific resources. */
+enum nubus_board_res_id {
+	NUBUS_RESID_BOARDID      = 0x0020,
+	NUBUS_RESID_PRAMINITDATA = 0x0021,
+	NUBUS_RESID_PRIMARYINIT  = 0x0022,
+	NUBUS_RESID_TIMEOUTCONST = 0x0023,
+	NUBUS_RESID_VENDORINFO   = 0x0024,
+	NUBUS_RESID_BOARDFLAGS   = 0x0025,
+	NUBUS_RESID_SECONDINIT   = 0x0026,
+
+	/* Not sure why Apple put these next two in here */
+	NUBUS_RESID_VIDNAMES     = 0x0041,
+	NUBUS_RESID_VIDMODES     = 0x007e
+};
+
+/* Fields within the vendor info directory */
+enum nubus_vendor_res_id {
+	NUBUS_RESID_VEND_ID     = 0x0001,
+	NUBUS_RESID_VEND_SERIAL = 0x0002,
+	NUBUS_RESID_VEND_REV    = 0x0003,
+	NUBUS_RESID_VEND_PART   = 0x0004,
+	NUBUS_RESID_VEND_DATE   = 0x0005
+};
+
+enum nubus_net_res_id {
+	NUBUS_RESID_MAC_ADDRESS  = 0x0080
+};
+
+enum nubus_cpu_res_id {
+	NUBUS_RESID_MEMINFO      = 0x0081,
+	NUBUS_RESID_ROMINFO      = 0x0082
+};
+
+enum nubus_display_res_id {
+	NUBUS_RESID_GAMMADIR    = 0x0040,
+	NUBUS_RESID_FIRSTMODE   = 0x0080,
+	NUBUS_RESID_SECONDMODE  = 0x0081,
+	NUBUS_RESID_THIRDMODE   = 0x0082,
+	NUBUS_RESID_FOURTHMODE  = 0x0083,
+	NUBUS_RESID_FIFTHMODE   = 0x0084,
+	NUBUS_RESID_SIXTHMODE   = 0x0085
+};
+
+struct nubus_dir
+{
+	unsigned char *base;
+	unsigned char *ptr;
+	int done;
+	int mask;
+};
+
+struct nubus_dirent
+{
+	unsigned char *base;
+	unsigned char type;
+	__u32 data;	/* Actually 24bits used */
+	int mask;
+};
+
+
+/* We'd like to get rid of this eventually.  Only daynaport.c uses it now. */
+static inline void *nubus_slot_addr(int slot)
+{
+	return (void *)(0xF0000000|(slot<<24));
+}
+
+#endif /* _UAPILINUX_NUBUS_H */
diff --git a/include/uapi/linux/nvram.h b/include/uapi/linux/nvram.h
new file mode 100644
index 0000000..0986c43
--- /dev/null
+++ b/include/uapi/linux/nvram.h
@@ -0,0 +1,16 @@
+#ifndef _UAPI_LINUX_NVRAM_H
+#define _UAPI_LINUX_NVRAM_H
+
+#include <linux/ioctl.h>
+
+/* /dev/nvram ioctls */
+#define NVRAM_INIT	_IO('p', 0x40) /* initialize NVRAM and set checksum */
+#define NVRAM_SETCKS	_IO('p', 0x41) /* recalculate checksum */
+
+/* for all current systems, this is where NVRAM starts */
+#define NVRAM_FIRST_BYTE    14
+/* all these functions expect an NVRAM offset, not an absolute */
+#define NVRAM_OFFSET(x)   ((x)-NVRAM_FIRST_BYTE)
+
+
+#endif /* _UAPI_LINUX_NVRAM_H */
diff --git a/include/linux/omap3isp.h b/include/uapi/linux/omap3isp.h
similarity index 100%
rename from include/linux/omap3isp.h
rename to include/uapi/linux/omap3isp.h
diff --git a/include/uapi/linux/omapfb.h b/include/uapi/linux/omapfb.h
new file mode 100644
index 0000000..7c97bc0
--- /dev/null
+++ b/include/uapi/linux/omapfb.h
@@ -0,0 +1,222 @@
+/*
+ * File: include/linux/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _UAPI__LINUX_OMAPFB_H__
+#define _UAPI__LINUX_OMAPFB_H__
+
+#include <linux/fb.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+#define OMAP_IO(num)		_IO('O', num)
+
+#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+#define OMAPFB_VSYNC		OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
+#define OMAPFB_WAITFORVSYNC	OMAP_IO(57)
+#define OMAPFB_MEMORY_READ	OMAP_IOR(58, struct omapfb_memory_read)
+#define OMAPFB_GET_OVERLAY_COLORMODE OMAP_IOR(59, struct omapfb_ovl_colormode)
+#define OMAPFB_WAITFORGO	OMAP_IO(60)
+#define OMAPFB_GET_VRAM_INFO	OMAP_IOR(61, struct omapfb_vram_info)
+#define OMAPFB_SET_TEARSYNC	OMAP_IOW(62, struct omapfb_tearsync_info)
+#define OMAPFB_GET_DISPLAY_INFO	OMAP_IOR(63, struct omapfb_display_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+#define OMAPFB_CAPS_TEARSYNC		0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
+#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK		0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
+
+#define OMAPFB_MEMTYPE_SDRAM		0
+#define OMAPFB_MEMTYPE_SRAM		1
+#define OMAPFB_MEMTYPE_MAX		1
+
+#define OMAPFB_MEM_IDX_ENABLED	0x80
+#define OMAPFB_MEM_IDX_MASK	0x7f
+
+enum omapfb_color_format {
+	OMAPFB_COLOR_RGB565 = 0,
+	OMAPFB_COLOR_YUV422,
+	OMAPFB_COLOR_YUV420,
+	OMAPFB_COLOR_CLUT_8BPP,
+	OMAPFB_COLOR_CLUT_4BPP,
+	OMAPFB_COLOR_CLUT_2BPP,
+	OMAPFB_COLOR_CLUT_1BPP,
+	OMAPFB_COLOR_RGB444,
+	OMAPFB_COLOR_YUY422,
+
+	OMAPFB_COLOR_ARGB16,
+	OMAPFB_COLOR_RGB24U,	/* RGB24, 32-bit container */
+	OMAPFB_COLOR_RGB24P,	/* RGB24, 24-bit container */
+	OMAPFB_COLOR_ARGB32,
+	OMAPFB_COLOR_RGBA32,
+	OMAPFB_COLOR_RGBX32,
+};
+
+struct omapfb_update_window {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+	__u32 out_x, out_y;
+	__u32 out_width, out_height;
+	__u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+};
+
+enum omapfb_plane {
+	OMAPFB_PLANE_GFX = 0,
+	OMAPFB_PLANE_VID1,
+	OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+	OMAPFB_CHANNEL_OUT_LCD = 0,
+	OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+	__u32 pos_x;
+	__u32 pos_y;
+	__u8  enabled;
+	__u8  channel_out;
+	__u8  mirror;
+	__u8  mem_idx;
+	__u32 out_width;
+	__u32 out_height;
+	__u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+	__u32 size;
+	__u8  type;
+	__u8  reserved[3];
+};
+
+struct omapfb_caps {
+	__u32 ctrl;
+	__u32 plane_color;
+	__u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+	OMAPFB_COLOR_KEY_DISABLED = 0,
+	OMAPFB_COLOR_KEY_GFX_DST,
+	OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+	__u8  channel_out;
+	__u32 background;
+	__u32 trans_key;
+	__u8  key_type;
+};
+
+enum omapfb_update_mode {
+	OMAPFB_UPDATE_DISABLED = 0,
+	OMAPFB_AUTO_UPDATE,
+	OMAPFB_MANUAL_UPDATE
+};
+
+struct omapfb_memory_read {
+	__u16 x;
+	__u16 y;
+	__u16 w;
+	__u16 h;
+	size_t buffer_size;
+	void __user *buffer;
+};
+
+struct omapfb_ovl_colormode {
+	__u8 overlay_idx;
+	__u8 mode_idx;
+	__u32 bits_per_pixel;
+	__u32 nonstd;
+	struct fb_bitfield red;
+	struct fb_bitfield green;
+	struct fb_bitfield blue;
+	struct fb_bitfield transp;
+};
+
+struct omapfb_vram_info {
+	__u32 total;
+	__u32 free;
+	__u32 largest_free_block;
+	__u32 reserved[5];
+};
+
+struct omapfb_tearsync_info {
+	__u8 enabled;
+	__u8 reserved1[3];
+	__u16 line;
+	__u16 reserved2;
+};
+
+struct omapfb_display_info {
+	__u16 xres;
+	__u16 yres;
+	__u32 width;	/* phys width of the display in micrometers */
+	__u32 height;	/* phys height of the display in micrometers */
+	__u32 reserved[5];
+};
+
+
+#endif /* _UAPI__LINUX_OMAPFB_H__ */
diff --git a/include/uapi/linux/oom.h b/include/uapi/linux/oom.h
new file mode 100644
index 0000000..a49c4af
--- /dev/null
+++ b/include/uapi/linux/oom.h
@@ -0,0 +1,11 @@
+#ifndef _UAPI__INCLUDE_LINUX_OOM_H
+#define _UAPI__INCLUDE_LINUX_OOM_H
+
+/*
+ * /proc/<pid>/oom_score_adj set to OOM_SCORE_ADJ_MIN disables oom killing for
+ * pid.
+ */
+#define OOM_SCORE_ADJ_MIN	(-1000)
+#define OOM_SCORE_ADJ_MAX	1000
+
+#endif /* _UAPI__INCLUDE_LINUX_OOM_H */
diff --git a/include/linux/packet_diag.h b/include/uapi/linux/packet_diag.h
similarity index 100%
rename from include/linux/packet_diag.h
rename to include/uapi/linux/packet_diag.h
diff --git a/include/linux/param.h b/include/uapi/linux/param.h
similarity index 100%
rename from include/linux/param.h
rename to include/uapi/linux/param.h
diff --git a/include/uapi/linux/parport.h b/include/uapi/linux/parport.h
new file mode 100644
index 0000000..f41388f
--- /dev/null
+++ b/include/uapi/linux/parport.h
@@ -0,0 +1,95 @@
+/*
+ * Any part of this program may be used in documents licensed under
+ * the GNU Free Documentation License, Version 1.1 or any later version
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UAPI_PARPORT_H_
+#define _UAPI_PARPORT_H_
+
+/* Start off with user-visible constants */
+
+/* Maximum of 16 ports per machine */
+#define PARPORT_MAX  16
+
+/* Magic numbers */
+#define PARPORT_IRQ_NONE  -1
+#define PARPORT_DMA_NONE  -1
+#define PARPORT_IRQ_AUTO  -2
+#define PARPORT_DMA_AUTO  -2
+#define PARPORT_DMA_NOFIFO -3
+#define PARPORT_DISABLE   -2
+#define PARPORT_IRQ_PROBEONLY -3
+#define PARPORT_IOHI_AUTO -1
+
+#define PARPORT_CONTROL_STROBE    0x1
+#define PARPORT_CONTROL_AUTOFD    0x2
+#define PARPORT_CONTROL_INIT      0x4
+#define PARPORT_CONTROL_SELECT    0x8
+
+#define PARPORT_STATUS_ERROR      0x8
+#define PARPORT_STATUS_SELECT     0x10
+#define PARPORT_STATUS_PAPEROUT   0x20
+#define PARPORT_STATUS_ACK        0x40
+#define PARPORT_STATUS_BUSY       0x80
+
+/* Type classes for Plug-and-Play probe.  */
+typedef enum {
+	PARPORT_CLASS_LEGACY = 0,       /* Non-IEEE1284 device */
+	PARPORT_CLASS_PRINTER,
+	PARPORT_CLASS_MODEM,
+	PARPORT_CLASS_NET,
+	PARPORT_CLASS_HDC,              /* Hard disk controller */
+	PARPORT_CLASS_PCMCIA,
+	PARPORT_CLASS_MEDIA,            /* Multimedia device */
+	PARPORT_CLASS_FDC,              /* Floppy disk controller */
+	PARPORT_CLASS_PORTS,
+	PARPORT_CLASS_SCANNER,
+	PARPORT_CLASS_DIGCAM,
+	PARPORT_CLASS_OTHER,            /* Anything else */
+	PARPORT_CLASS_UNSPEC,           /* No CLS field in ID */
+	PARPORT_CLASS_SCSIADAPTER
+} parport_device_class;
+
+/* The "modes" entry in parport is a bit field representing the
+   capabilities of the hardware. */
+#define PARPORT_MODE_PCSPP	(1<<0) /* IBM PC registers available. */
+#define PARPORT_MODE_TRISTATE	(1<<1) /* Can tristate. */
+#define PARPORT_MODE_EPP	(1<<2) /* Hardware EPP. */
+#define PARPORT_MODE_ECP	(1<<3) /* Hardware ECP. */
+#define PARPORT_MODE_COMPAT	(1<<4) /* Hardware 'printer protocol'. */
+#define PARPORT_MODE_DMA	(1<<5) /* Hardware can DMA. */
+#define PARPORT_MODE_SAFEININT	(1<<6) /* SPP registers accessible in IRQ. */
+
+/* IEEE1284 modes: 
+   Nibble mode, byte mode, ECP, ECPRLE and EPP are their own
+   'extensibility request' values.  Others are special.
+   'Real' ECP modes must have the IEEE1284_MODE_ECP bit set.  */
+#define IEEE1284_MODE_NIBBLE             0
+#define IEEE1284_MODE_BYTE              (1<<0)
+#define IEEE1284_MODE_COMPAT            (1<<8)
+#define IEEE1284_MODE_BECP              (1<<9) /* Bounded ECP mode */
+#define IEEE1284_MODE_ECP               (1<<4)
+#define IEEE1284_MODE_ECPRLE            (IEEE1284_MODE_ECP | (1<<5))
+#define IEEE1284_MODE_ECPSWE            (1<<10) /* Software-emulated */
+#define IEEE1284_MODE_EPP               (1<<6)
+#define IEEE1284_MODE_EPPSL             (1<<11) /* EPP 1.7 */
+#define IEEE1284_MODE_EPPSWE            (1<<12) /* Software-emulated */
+#define IEEE1284_DEVICEID               (1<<2)  /* This is a flag */
+#define IEEE1284_EXT_LINK               (1<<14) /* This flag causes the
+						 * extensibility link to
+						 * be requested, using
+						 * bits 0-6. */
+
+/* For the benefit of parport_read/write, you can use these with
+ * parport_negotiate to use address operations.  They have no effect
+ * other than to make parport_read/write use address transfers. */
+#define IEEE1284_ADDR			(1<<13)	/* This is a flag */
+#define IEEE1284_DATA			 0	/* So is this */
+
+/* Flags for block transfer operations. */
+#define PARPORT_EPP_FAST		(1<<0) /* Unreliable counts. */
+#define PARPORT_W91284PIC		(1<<1) /* have a Warp9 w91284pic in the device */
+
+/* The rest is for the kernel only */
+#endif /* _UAPI_PARPORT_H_ */
diff --git a/include/uapi/linux/patchkey.h b/include/uapi/linux/patchkey.h
new file mode 100644
index 0000000..1bda0e5
--- /dev/null
+++ b/include/uapi/linux/patchkey.h
@@ -0,0 +1,37 @@
+/*
+ * <linux/patchkey.h> -- definition of _PATCHKEY macro
+ *
+ * Copyright (C) 2005 Stuart Brady
+ *
+ * This exists because awe_voice.h defined its own _PATCHKEY and it wasn't
+ * clear whether removing this would break anything in userspace.
+ *
+ * Do not include this file directly.  Please use <sys/soundcard.h> instead.
+ * For kernel code, use <linux/soundcard.h>
+ */
+
+#ifndef _LINUX_PATCHKEY_H_INDIRECT
+#error "patchkey.h included directly"
+#endif
+
+#ifndef _UAPI_LINUX_PATCHKEY_H
+#define _UAPI_LINUX_PATCHKEY_H
+
+/* Endian macros. */
+#ifndef __KERNEL__
+#  include <endian.h>
+#endif
+
+#if !defined(__KERNEL__)
+#if defined(__BYTE_ORDER)
+#  if __BYTE_ORDER == __BIG_ENDIAN
+#    define _PATCHKEY(id) (0xfd00|id)
+#  elif __BYTE_ORDER == __LITTLE_ENDIAN
+#    define _PATCHKEY(id) ((id<<8)|0x00fd)
+#  else
+#    error "could not determine byte order"
+#  endif
+#endif
+#endif
+
+#endif /* _UAPI_LINUX_PATCHKEY_H */
diff --git a/include/uapi/linux/pci.h b/include/uapi/linux/pci.h
new file mode 100644
index 0000000..3c292bc0
--- /dev/null
+++ b/include/uapi/linux/pci.h
@@ -0,0 +1,41 @@
+/*
+ *	pci.h
+ *
+ *	PCI defines and function prototypes
+ *	Copyright 1994, Drew Eckhardt
+ *	Copyright 1997--1999 Martin Mares <mj@ucw.cz>
+ *
+ *	For more information, please consult the following manuals (look at
+ *	http://www.pcisig.com/ for how to get them):
+ *
+ *	PCI BIOS Specification
+ *	PCI Local Bus Specification
+ *	PCI to PCI Bridge Specification
+ *	PCI System Design Guide
+ */
+
+#ifndef _UAPILINUX_PCI_H
+#define _UAPILINUX_PCI_H
+
+#include <linux/pci_regs.h>	/* The pci register defines */
+
+/*
+ * The PCI interface treats multi-function devices as independent
+ * devices.  The slot/function address of each device is encoded
+ * in a single byte as follows:
+ *
+ *	7:3 = slot
+ *	2:0 = function
+ */
+#define PCI_DEVFN(slot, func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
+#define PCI_SLOT(devfn)		(((devfn) >> 3) & 0x1f)
+#define PCI_FUNC(devfn)		((devfn) & 0x07)
+
+/* Ioctls for /proc/bus/pci/X/Y nodes. */
+#define PCIIOC_BASE		('P' << 24 | 'C' << 16 | 'I' << 8)
+#define PCIIOC_CONTROLLER	(PCIIOC_BASE | 0x00)	/* Get controller for PCI device. */
+#define PCIIOC_MMAP_IS_IO	(PCIIOC_BASE | 0x01)	/* Set mmap state to I/O space. */
+#define PCIIOC_MMAP_IS_MEM	(PCIIOC_BASE | 0x02)	/* Set mmap state to MEM space. */
+#define PCIIOC_WRITE_COMBINE	(PCIIOC_BASE | 0x03)	/* Enable/disable write-combining. */
+
+#endif /* _UAPILINUX_PCI_H */
diff --git a/include/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
similarity index 100%
rename from include/linux/pci_regs.h
rename to include/uapi/linux/pci_regs.h
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
new file mode 100644
index 0000000..4f63c05
--- /dev/null
+++ b/include/uapi/linux/perf_event.h
@@ -0,0 +1,615 @@
+/*
+ * Performance events:
+ *
+ *    Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de>
+ *    Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar
+ *    Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra
+ *
+ * Data type definitions, declarations, prototypes.
+ *
+ *    Started by: Thomas Gleixner and Ingo Molnar
+ *
+ * For licencing details see kernel-base/COPYING
+ */
+#ifndef _UAPI_LINUX_PERF_EVENT_H
+#define _UAPI_LINUX_PERF_EVENT_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <asm/byteorder.h>
+
+/*
+ * User-space ABI bits:
+ */
+
+/*
+ * attr.type
+ */
+enum perf_type_id {
+	PERF_TYPE_HARDWARE			= 0,
+	PERF_TYPE_SOFTWARE			= 1,
+	PERF_TYPE_TRACEPOINT			= 2,
+	PERF_TYPE_HW_CACHE			= 3,
+	PERF_TYPE_RAW				= 4,
+	PERF_TYPE_BREAKPOINT			= 5,
+
+	PERF_TYPE_MAX,				/* non-ABI */
+};
+
+/*
+ * Generalized performance event event_id types, used by the
+ * attr.event_id parameter of the sys_perf_event_open()
+ * syscall:
+ */
+enum perf_hw_id {
+	/*
+	 * Common hardware events, generalized by the kernel:
+	 */
+	PERF_COUNT_HW_CPU_CYCLES		= 0,
+	PERF_COUNT_HW_INSTRUCTIONS		= 1,
+	PERF_COUNT_HW_CACHE_REFERENCES		= 2,
+	PERF_COUNT_HW_CACHE_MISSES		= 3,
+	PERF_COUNT_HW_BRANCH_INSTRUCTIONS	= 4,
+	PERF_COUNT_HW_BRANCH_MISSES		= 5,
+	PERF_COUNT_HW_BUS_CYCLES		= 6,
+	PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	= 7,
+	PERF_COUNT_HW_STALLED_CYCLES_BACKEND	= 8,
+	PERF_COUNT_HW_REF_CPU_CYCLES		= 9,
+
+	PERF_COUNT_HW_MAX,			/* non-ABI */
+};
+
+/*
+ * Generalized hardware cache events:
+ *
+ *       { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x
+ *       { read, write, prefetch } x
+ *       { accesses, misses }
+ */
+enum perf_hw_cache_id {
+	PERF_COUNT_HW_CACHE_L1D			= 0,
+	PERF_COUNT_HW_CACHE_L1I			= 1,
+	PERF_COUNT_HW_CACHE_LL			= 2,
+	PERF_COUNT_HW_CACHE_DTLB		= 3,
+	PERF_COUNT_HW_CACHE_ITLB		= 4,
+	PERF_COUNT_HW_CACHE_BPU			= 5,
+	PERF_COUNT_HW_CACHE_NODE		= 6,
+
+	PERF_COUNT_HW_CACHE_MAX,		/* non-ABI */
+};
+
+enum perf_hw_cache_op_id {
+	PERF_COUNT_HW_CACHE_OP_READ		= 0,
+	PERF_COUNT_HW_CACHE_OP_WRITE		= 1,
+	PERF_COUNT_HW_CACHE_OP_PREFETCH		= 2,
+
+	PERF_COUNT_HW_CACHE_OP_MAX,		/* non-ABI */
+};
+
+enum perf_hw_cache_op_result_id {
+	PERF_COUNT_HW_CACHE_RESULT_ACCESS	= 0,
+	PERF_COUNT_HW_CACHE_RESULT_MISS		= 1,
+
+	PERF_COUNT_HW_CACHE_RESULT_MAX,		/* non-ABI */
+};
+
+/*
+ * Special "software" events provided by the kernel, even if the hardware
+ * does not support performance events. These events measure various
+ * physical and sw events of the kernel (and allow the profiling of them as
+ * well):
+ */
+enum perf_sw_ids {
+	PERF_COUNT_SW_CPU_CLOCK			= 0,
+	PERF_COUNT_SW_TASK_CLOCK		= 1,
+	PERF_COUNT_SW_PAGE_FAULTS		= 2,
+	PERF_COUNT_SW_CONTEXT_SWITCHES		= 3,
+	PERF_COUNT_SW_CPU_MIGRATIONS		= 4,
+	PERF_COUNT_SW_PAGE_FAULTS_MIN		= 5,
+	PERF_COUNT_SW_PAGE_FAULTS_MAJ		= 6,
+	PERF_COUNT_SW_ALIGNMENT_FAULTS		= 7,
+	PERF_COUNT_SW_EMULATION_FAULTS		= 8,
+
+	PERF_COUNT_SW_MAX,			/* non-ABI */
+};
+
+/*
+ * Bits that can be set in attr.sample_type to request information
+ * in the overflow packets.
+ */
+enum perf_event_sample_format {
+	PERF_SAMPLE_IP				= 1U << 0,
+	PERF_SAMPLE_TID				= 1U << 1,
+	PERF_SAMPLE_TIME			= 1U << 2,
+	PERF_SAMPLE_ADDR			= 1U << 3,
+	PERF_SAMPLE_READ			= 1U << 4,
+	PERF_SAMPLE_CALLCHAIN			= 1U << 5,
+	PERF_SAMPLE_ID				= 1U << 6,
+	PERF_SAMPLE_CPU				= 1U << 7,
+	PERF_SAMPLE_PERIOD			= 1U << 8,
+	PERF_SAMPLE_STREAM_ID			= 1U << 9,
+	PERF_SAMPLE_RAW				= 1U << 10,
+	PERF_SAMPLE_BRANCH_STACK		= 1U << 11,
+	PERF_SAMPLE_REGS_USER			= 1U << 12,
+	PERF_SAMPLE_STACK_USER			= 1U << 13,
+
+	PERF_SAMPLE_MAX = 1U << 14,		/* non-ABI */
+};
+
+/*
+ * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set
+ *
+ * If the user does not pass priv level information via branch_sample_type,
+ * the kernel uses the event's priv level. Branch and event priv levels do
+ * not have to match. Branch priv level is checked for permissions.
+ *
+ * The branch types can be combined, however BRANCH_ANY covers all types
+ * of branches and therefore it supersedes all the other types.
+ */
+enum perf_branch_sample_type {
+	PERF_SAMPLE_BRANCH_USER		= 1U << 0, /* user branches */
+	PERF_SAMPLE_BRANCH_KERNEL	= 1U << 1, /* kernel branches */
+	PERF_SAMPLE_BRANCH_HV		= 1U << 2, /* hypervisor branches */
+
+	PERF_SAMPLE_BRANCH_ANY		= 1U << 3, /* any branch types */
+	PERF_SAMPLE_BRANCH_ANY_CALL	= 1U << 4, /* any call branch */
+	PERF_SAMPLE_BRANCH_ANY_RETURN	= 1U << 5, /* any return branch */
+	PERF_SAMPLE_BRANCH_IND_CALL	= 1U << 6, /* indirect calls */
+
+	PERF_SAMPLE_BRANCH_MAX		= 1U << 7, /* non-ABI */
+};
+
+#define PERF_SAMPLE_BRANCH_PLM_ALL \
+	(PERF_SAMPLE_BRANCH_USER|\
+	 PERF_SAMPLE_BRANCH_KERNEL|\
+	 PERF_SAMPLE_BRANCH_HV)
+
+/*
+ * Values to determine ABI of the registers dump.
+ */
+enum perf_sample_regs_abi {
+	PERF_SAMPLE_REGS_ABI_NONE	= 0,
+	PERF_SAMPLE_REGS_ABI_32		= 1,
+	PERF_SAMPLE_REGS_ABI_64		= 2,
+};
+
+/*
+ * The format of the data returned by read() on a perf event fd,
+ * as specified by attr.read_format:
+ *
+ * struct read_format {
+ *	{ u64		value;
+ *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
+ *	  { u64		id;           } && PERF_FORMAT_ID
+ *	} && !PERF_FORMAT_GROUP
+ *
+ *	{ u64		nr;
+ *	  { u64		time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED
+ *	  { u64		time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING
+ *	  { u64		value;
+ *	    { u64	id;           } && PERF_FORMAT_ID
+ *	  }		cntr[nr];
+ *	} && PERF_FORMAT_GROUP
+ * };
+ */
+enum perf_event_read_format {
+	PERF_FORMAT_TOTAL_TIME_ENABLED		= 1U << 0,
+	PERF_FORMAT_TOTAL_TIME_RUNNING		= 1U << 1,
+	PERF_FORMAT_ID				= 1U << 2,
+	PERF_FORMAT_GROUP			= 1U << 3,
+
+	PERF_FORMAT_MAX = 1U << 4,		/* non-ABI */
+};
+
+#define PERF_ATTR_SIZE_VER0	64	/* sizeof first published struct */
+#define PERF_ATTR_SIZE_VER1	72	/* add: config2 */
+#define PERF_ATTR_SIZE_VER2	80	/* add: branch_sample_type */
+#define PERF_ATTR_SIZE_VER3	96	/* add: sample_regs_user */
+					/* add: sample_stack_user */
+
+/*
+ * Hardware event_id to monitor via a performance monitoring event:
+ */
+struct perf_event_attr {
+
+	/*
+	 * Major type: hardware/software/tracepoint/etc.
+	 */
+	__u32			type;
+
+	/*
+	 * Size of the attr structure, for fwd/bwd compat.
+	 */
+	__u32			size;
+
+	/*
+	 * Type specific configuration information.
+	 */
+	__u64			config;
+
+	union {
+		__u64		sample_period;
+		__u64		sample_freq;
+	};
+
+	__u64			sample_type;
+	__u64			read_format;
+
+	__u64			disabled       :  1, /* off by default        */
+				inherit	       :  1, /* children inherit it   */
+				pinned	       :  1, /* must always be on PMU */
+				exclusive      :  1, /* only group on PMU     */
+				exclude_user   :  1, /* don't count user      */
+				exclude_kernel :  1, /* ditto kernel          */
+				exclude_hv     :  1, /* ditto hypervisor      */
+				exclude_idle   :  1, /* don't count when idle */
+				mmap           :  1, /* include mmap data     */
+				comm	       :  1, /* include comm data     */
+				freq           :  1, /* use freq, not period  */
+				inherit_stat   :  1, /* per task counts       */
+				enable_on_exec :  1, /* next exec enables     */
+				task           :  1, /* trace fork/exit       */
+				watermark      :  1, /* wakeup_watermark      */
+				/*
+				 * precise_ip:
+				 *
+				 *  0 - SAMPLE_IP can have arbitrary skid
+				 *  1 - SAMPLE_IP must have constant skid
+				 *  2 - SAMPLE_IP requested to have 0 skid
+				 *  3 - SAMPLE_IP must have 0 skid
+				 *
+				 *  See also PERF_RECORD_MISC_EXACT_IP
+				 */
+				precise_ip     :  2, /* skid constraint       */
+				mmap_data      :  1, /* non-exec mmap data    */
+				sample_id_all  :  1, /* sample_type all events */
+
+				exclude_host   :  1, /* don't count in host   */
+				exclude_guest  :  1, /* don't count in guest  */
+
+				exclude_callchain_kernel : 1, /* exclude kernel callchains */
+				exclude_callchain_user   : 1, /* exclude user callchains */
+
+				__reserved_1   : 41;
+
+	union {
+		__u32		wakeup_events;	  /* wakeup every n events */
+		__u32		wakeup_watermark; /* bytes before wakeup   */
+	};
+
+	__u32			bp_type;
+	union {
+		__u64		bp_addr;
+		__u64		config1; /* extension of config */
+	};
+	union {
+		__u64		bp_len;
+		__u64		config2; /* extension of config1 */
+	};
+	__u64	branch_sample_type; /* enum perf_branch_sample_type */
+
+	/*
+	 * Defines set of user regs to dump on samples.
+	 * See asm/perf_regs.h for details.
+	 */
+	__u64	sample_regs_user;
+
+	/*
+	 * Defines size of the user stack to dump on samples.
+	 */
+	__u32	sample_stack_user;
+
+	/* Align to u64. */
+	__u32	__reserved_2;
+};
+
+#define perf_flags(attr)	(*(&(attr)->read_format + 1))
+
+/*
+ * Ioctls that can be done on a perf event fd:
+ */
+#define PERF_EVENT_IOC_ENABLE		_IO ('$', 0)
+#define PERF_EVENT_IOC_DISABLE		_IO ('$', 1)
+#define PERF_EVENT_IOC_REFRESH		_IO ('$', 2)
+#define PERF_EVENT_IOC_RESET		_IO ('$', 3)
+#define PERF_EVENT_IOC_PERIOD		_IOW('$', 4, __u64)
+#define PERF_EVENT_IOC_SET_OUTPUT	_IO ('$', 5)
+#define PERF_EVENT_IOC_SET_FILTER	_IOW('$', 6, char *)
+
+enum perf_event_ioc_flags {
+	PERF_IOC_FLAG_GROUP		= 1U << 0,
+};
+
+/*
+ * Structure of the page that can be mapped via mmap
+ */
+struct perf_event_mmap_page {
+	__u32	version;		/* version number of this structure */
+	__u32	compat_version;		/* lowest version this is compat with */
+
+	/*
+	 * Bits needed to read the hw events in user-space.
+	 *
+	 *   u32 seq, time_mult, time_shift, idx, width;
+	 *   u64 count, enabled, running;
+	 *   u64 cyc, time_offset;
+	 *   s64 pmc = 0;
+	 *
+	 *   do {
+	 *     seq = pc->lock;
+	 *     barrier()
+	 *
+	 *     enabled = pc->time_enabled;
+	 *     running = pc->time_running;
+	 *
+	 *     if (pc->cap_usr_time && enabled != running) {
+	 *       cyc = rdtsc();
+	 *       time_offset = pc->time_offset;
+	 *       time_mult   = pc->time_mult;
+	 *       time_shift  = pc->time_shift;
+	 *     }
+	 *
+	 *     idx = pc->index;
+	 *     count = pc->offset;
+	 *     if (pc->cap_usr_rdpmc && idx) {
+	 *       width = pc->pmc_width;
+	 *       pmc = rdpmc(idx - 1);
+	 *     }
+	 *
+	 *     barrier();
+	 *   } while (pc->lock != seq);
+	 *
+	 * NOTE: for obvious reason this only works on self-monitoring
+	 *       processes.
+	 */
+	__u32	lock;			/* seqlock for synchronization */
+	__u32	index;			/* hardware event identifier */
+	__s64	offset;			/* add to hardware event value */
+	__u64	time_enabled;		/* time event active */
+	__u64	time_running;		/* time event on cpu */
+	union {
+		__u64	capabilities;
+		__u64	cap_usr_time  : 1,
+			cap_usr_rdpmc : 1,
+			cap_____res   : 62;
+	};
+
+	/*
+	 * If cap_usr_rdpmc this field provides the bit-width of the value
+	 * read using the rdpmc() or equivalent instruction. This can be used
+	 * to sign extend the result like:
+	 *
+	 *   pmc <<= 64 - width;
+	 *   pmc >>= 64 - width; // signed shift right
+	 *   count += pmc;
+	 */
+	__u16	pmc_width;
+
+	/*
+	 * If cap_usr_time the below fields can be used to compute the time
+	 * delta since time_enabled (in ns) using rdtsc or similar.
+	 *
+	 *   u64 quot, rem;
+	 *   u64 delta;
+	 *
+	 *   quot = (cyc >> time_shift);
+	 *   rem = cyc & ((1 << time_shift) - 1);
+	 *   delta = time_offset + quot * time_mult +
+	 *              ((rem * time_mult) >> time_shift);
+	 *
+	 * Where time_offset,time_mult,time_shift and cyc are read in the
+	 * seqcount loop described above. This delta can then be added to
+	 * enabled and possible running (if idx), improving the scaling:
+	 *
+	 *   enabled += delta;
+	 *   if (idx)
+	 *     running += delta;
+	 *
+	 *   quot = count / running;
+	 *   rem  = count % running;
+	 *   count = quot * enabled + (rem * enabled) / running;
+	 */
+	__u16	time_shift;
+	__u32	time_mult;
+	__u64	time_offset;
+
+		/*
+		 * Hole for extension of the self monitor capabilities
+		 */
+
+	__u64	__reserved[120];	/* align to 1k */
+
+	/*
+	 * Control data for the mmap() data buffer.
+	 *
+	 * User-space reading the @data_head value should issue an rmb(), on
+	 * SMP capable platforms, after reading this value -- see
+	 * perf_event_wakeup().
+	 *
+	 * When the mapping is PROT_WRITE the @data_tail value should be
+	 * written by userspace to reflect the last read data. In this case
+	 * the kernel will not over-write unread data.
+	 */
+	__u64   data_head;		/* head in the data section */
+	__u64	data_tail;		/* user-space written tail */
+};
+
+#define PERF_RECORD_MISC_CPUMODE_MASK		(7 << 0)
+#define PERF_RECORD_MISC_CPUMODE_UNKNOWN	(0 << 0)
+#define PERF_RECORD_MISC_KERNEL			(1 << 0)
+#define PERF_RECORD_MISC_USER			(2 << 0)
+#define PERF_RECORD_MISC_HYPERVISOR		(3 << 0)
+#define PERF_RECORD_MISC_GUEST_KERNEL		(4 << 0)
+#define PERF_RECORD_MISC_GUEST_USER		(5 << 0)
+
+/*
+ * Indicates that the content of PERF_SAMPLE_IP points to
+ * the actual instruction that triggered the event. See also
+ * perf_event_attr::precise_ip.
+ */
+#define PERF_RECORD_MISC_EXACT_IP		(1 << 14)
+/*
+ * Reserve the last bit to indicate some extended misc field
+ */
+#define PERF_RECORD_MISC_EXT_RESERVED		(1 << 15)
+
+struct perf_event_header {
+	__u32	type;
+	__u16	misc;
+	__u16	size;
+};
+
+enum perf_event_type {
+
+	/*
+	 * If perf_event_attr.sample_id_all is set then all event types will
+	 * have the sample_type selected fields related to where/when
+	 * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
+	 * described in PERF_RECORD_SAMPLE below, it will be stashed just after
+	 * the perf_event_header and the fields already present for the existing
+	 * fields, i.e. at the end of the payload. That way a newer perf.data
+	 * file will be supported by older perf tools, with these new optional
+	 * fields being ignored.
+	 *
+	 * The MMAP events record the PROT_EXEC mappings so that we can
+	 * correlate userspace IPs to code. They have the following structure:
+	 *
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	u64				addr;
+	 *	u64				len;
+	 *	u64				pgoff;
+	 *	char				filename[];
+	 * };
+	 */
+	PERF_RECORD_MMAP			= 1,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				id;
+	 *	u64				lost;
+	 * };
+	 */
+	PERF_RECORD_LOST			= 2,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	u32				pid, tid;
+	 *	char				comm[];
+	 * };
+	 */
+	PERF_RECORD_COMM			= 3,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, ppid;
+	 *	u32				tid, ptid;
+	 *	u64				time;
+	 * };
+	 */
+	PERF_RECORD_EXIT			= 4,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u64				time;
+	 *	u64				id;
+	 *	u64				stream_id;
+	 * };
+	 */
+	PERF_RECORD_THROTTLE			= 5,
+	PERF_RECORD_UNTHROTTLE			= 6,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, ppid;
+	 *	u32				tid, ptid;
+	 *	u64				time;
+	 * };
+	 */
+	PERF_RECORD_FORK			= 7,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *	u32				pid, tid;
+	 *
+	 *	struct read_format		values;
+	 * };
+	 */
+	PERF_RECORD_READ			= 8,
+
+	/*
+	 * struct {
+	 *	struct perf_event_header	header;
+	 *
+	 *	{ u64			ip;	  } && PERF_SAMPLE_IP
+	 *	{ u32			pid, tid; } && PERF_SAMPLE_TID
+	 *	{ u64			time;     } && PERF_SAMPLE_TIME
+	 *	{ u64			addr;     } && PERF_SAMPLE_ADDR
+	 *	{ u64			id;	  } && PERF_SAMPLE_ID
+	 *	{ u64			stream_id;} && PERF_SAMPLE_STREAM_ID
+	 *	{ u32			cpu, res; } && PERF_SAMPLE_CPU
+	 *	{ u64			period;   } && PERF_SAMPLE_PERIOD
+	 *
+	 *	{ struct read_format	values;	  } && PERF_SAMPLE_READ
+	 *
+	 *	{ u64			nr,
+	 *	  u64			ips[nr];  } && PERF_SAMPLE_CALLCHAIN
+	 *
+	 *	#
+	 *	# The RAW record below is opaque data wrt the ABI
+	 *	#
+	 *	# That is, the ABI doesn't make any promises wrt to
+	 *	# the stability of its content, it may vary depending
+	 *	# on event, hardware, kernel version and phase of
+	 *	# the moon.
+	 *	#
+	 *	# In other words, PERF_SAMPLE_RAW contents are not an ABI.
+	 *	#
+	 *
+	 *	{ u32			size;
+	 *	  char                  data[size];}&& PERF_SAMPLE_RAW
+	 *
+	 *	{ u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK
+	 *
+	 * 	{ u64			abi; # enum perf_sample_regs_abi
+	 * 	  u64			regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER
+	 *
+	 * 	{ u64			size;
+	 * 	  char			data[size];
+	 * 	  u64			dyn_size; } && PERF_SAMPLE_STACK_USER
+	 * };
+	 */
+	PERF_RECORD_SAMPLE			= 9,
+
+	PERF_RECORD_MAX,			/* non-ABI */
+};
+
+#define PERF_MAX_STACK_DEPTH		127
+
+enum perf_callchain_context {
+	PERF_CONTEXT_HV			= (__u64)-32,
+	PERF_CONTEXT_KERNEL		= (__u64)-128,
+	PERF_CONTEXT_USER		= (__u64)-512,
+
+	PERF_CONTEXT_GUEST		= (__u64)-2048,
+	PERF_CONTEXT_GUEST_KERNEL	= (__u64)-2176,
+	PERF_CONTEXT_GUEST_USER		= (__u64)-2560,
+
+	PERF_CONTEXT_MAX		= (__u64)-4095,
+};
+
+#define PERF_FLAG_FD_NO_GROUP		(1U << 0)
+#define PERF_FLAG_FD_OUTPUT		(1U << 1)
+#define PERF_FLAG_PID_CGROUP		(1U << 2) /* pid=cgroup id, per-cpu mode only */
+
+#endif /* _UAPI_LINUX_PERF_EVENT_H */
diff --git a/include/uapi/linux/personality.h b/include/uapi/linux/personality.h
new file mode 100644
index 0000000..aa169c4
--- /dev/null
+++ b/include/uapi/linux/personality.h
@@ -0,0 +1,69 @@
+#ifndef _UAPI_LINUX_PERSONALITY_H
+#define _UAPI_LINUX_PERSONALITY_H
+
+
+/*
+ * Flags for bug emulation.
+ *
+ * These occupy the top three bytes.
+ */
+enum {
+	UNAME26	=               0x0020000,
+	ADDR_NO_RANDOMIZE = 	0x0040000,	/* disable randomization of VA space */
+	FDPIC_FUNCPTRS =	0x0080000,	/* userspace function ptrs point to descriptors
+						 * (signal handling)
+						 */
+	MMAP_PAGE_ZERO =	0x0100000,
+	ADDR_COMPAT_LAYOUT =	0x0200000,
+	READ_IMPLIES_EXEC =	0x0400000,
+	ADDR_LIMIT_32BIT =	0x0800000,
+	SHORT_INODE =		0x1000000,
+	WHOLE_SECONDS =		0x2000000,
+	STICKY_TIMEOUTS	=	0x4000000,
+	ADDR_LIMIT_3GB = 	0x8000000,
+};
+
+/*
+ * Security-relevant compatibility flags that must be
+ * cleared upon setuid or setgid exec:
+ */
+#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC  | \
+			    ADDR_NO_RANDOMIZE  | \
+			    ADDR_COMPAT_LAYOUT | \
+			    MMAP_PAGE_ZERO)
+
+/*
+ * Personality types.
+ *
+ * These go in the low byte.  Avoid using the top bit, it will
+ * conflict with error returns.
+ */
+enum {
+	PER_LINUX =		0x0000,
+	PER_LINUX_32BIT =	0x0000 | ADDR_LIMIT_32BIT,
+	PER_LINUX_FDPIC =	0x0000 | FDPIC_FUNCPTRS,
+	PER_SVR4 =		0x0001 | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+	PER_SVR3 =		0x0002 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_SCOSVR3 =		0x0003 | STICKY_TIMEOUTS |
+					 WHOLE_SECONDS | SHORT_INODE,
+	PER_OSR5 =		0x0003 | STICKY_TIMEOUTS | WHOLE_SECONDS,
+	PER_WYSEV386 =		0x0004 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_ISCR4 =		0x0005 | STICKY_TIMEOUTS,
+	PER_BSD =		0x0006,
+	PER_SUNOS =		0x0006 | STICKY_TIMEOUTS,
+	PER_XENIX =		0x0007 | STICKY_TIMEOUTS | SHORT_INODE,
+	PER_LINUX32 =		0x0008,
+	PER_LINUX32_3GB =	0x0008 | ADDR_LIMIT_3GB,
+	PER_IRIX32 =		0x0009 | STICKY_TIMEOUTS,/* IRIX5 32-bit */
+	PER_IRIXN32 =		0x000a | STICKY_TIMEOUTS,/* IRIX6 new 32-bit */
+	PER_IRIX64 =		0x000b | STICKY_TIMEOUTS,/* IRIX6 64-bit */
+	PER_RISCOS =		0x000c,
+	PER_SOLARIS =		0x000d | STICKY_TIMEOUTS,
+	PER_UW7 =		0x000e | STICKY_TIMEOUTS | MMAP_PAGE_ZERO,
+	PER_OSF4 =		0x000f,			 /* OSF/1 v4 */
+	PER_HPUX =		0x0010,
+	PER_MASK =		0x00ff,
+};
+
+
+#endif /* _UAPI_LINUX_PERSONALITY_H */
diff --git a/include/linux/pfkeyv2.h b/include/uapi/linux/pfkeyv2.h
similarity index 100%
rename from include/linux/pfkeyv2.h
rename to include/uapi/linux/pfkeyv2.h
diff --git a/include/linux/pg.h b/include/uapi/linux/pg.h
similarity index 100%
rename from include/linux/pg.h
rename to include/uapi/linux/pg.h
diff --git a/include/linux/phantom.h b/include/uapi/linux/phantom.h
similarity index 100%
rename from include/linux/phantom.h
rename to include/uapi/linux/phantom.h
diff --git a/include/uapi/linux/phonet.h b/include/uapi/linux/phonet.h
new file mode 100644
index 0000000..a3e1d65
--- /dev/null
+++ b/include/uapi/linux/phonet.h
@@ -0,0 +1,185 @@
+/**
+ * file phonet.h
+ *
+ * Phonet sockets kernel interface
+ *
+ * Copyright (C) 2008 Nokia Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _UAPILINUX_PHONET_H
+#define _UAPILINUX_PHONET_H
+
+#include <linux/types.h>
+#include <linux/socket.h>
+
+/* Automatic protocol selection */
+#define PN_PROTO_TRANSPORT	0
+/* Phonet datagram socket */
+#define PN_PROTO_PHONET		1
+/* Phonet pipe */
+#define PN_PROTO_PIPE		2
+#define PHONET_NPROTO		3
+
+/* Socket options for SOL_PNPIPE level */
+#define PNPIPE_ENCAP		1
+#define PNPIPE_IFINDEX		2
+#define PNPIPE_HANDLE		3
+#define PNPIPE_INITSTATE	4
+
+#define PNADDR_ANY		0
+#define PNADDR_BROADCAST	0xFC
+#define PNPORT_RESOURCE_ROUTING	0
+
+/* Values for PNPIPE_ENCAP option */
+#define PNPIPE_ENCAP_NONE	0
+#define PNPIPE_ENCAP_IP		1
+
+/* ioctls */
+#define SIOCPNGETOBJECT		(SIOCPROTOPRIVATE + 0)
+#define SIOCPNENABLEPIPE	(SIOCPROTOPRIVATE + 13)
+#define SIOCPNADDRESOURCE	(SIOCPROTOPRIVATE + 14)
+#define SIOCPNDELRESOURCE	(SIOCPROTOPRIVATE + 15)
+
+/* Phonet protocol header */
+struct phonethdr {
+	__u8	pn_rdev;
+	__u8	pn_sdev;
+	__u8	pn_res;
+	__be16	pn_length;
+	__u8	pn_robj;
+	__u8	pn_sobj;
+} __attribute__((packed));
+
+/* Common Phonet payload header */
+struct phonetmsg {
+	__u8	pn_trans_id;	/* transaction ID */
+	__u8	pn_msg_id;	/* message type */
+	union {
+		struct {
+			__u8	pn_submsg_id;	/* message subtype */
+			__u8	pn_data[5];
+		} base;
+		struct {
+			__u16	pn_e_res_id;	/* extended resource ID */
+			__u8	pn_e_submsg_id;	/* message subtype */
+			__u8	pn_e_data[3];
+		} ext;
+	} pn_msg_u;
+};
+#define PN_COMMON_MESSAGE	0xF0
+#define PN_COMMGR		0x10
+#define PN_PREFIX		0xE0 /* resource for extended messages */
+#define pn_submsg_id		pn_msg_u.base.pn_submsg_id
+#define pn_e_submsg_id		pn_msg_u.ext.pn_e_submsg_id
+#define pn_e_res_id		pn_msg_u.ext.pn_e_res_id
+#define pn_data			pn_msg_u.base.pn_data
+#define pn_e_data		pn_msg_u.ext.pn_e_data
+
+/* data for unreachable errors */
+#define PN_COMM_SERVICE_NOT_IDENTIFIED_RESP	0x01
+#define PN_COMM_ISA_ENTITY_NOT_REACHABLE_RESP	0x14
+#define pn_orig_msg_id		pn_data[0]
+#define pn_status		pn_data[1]
+#define pn_e_orig_msg_id	pn_e_data[0]
+#define pn_e_status		pn_e_data[1]
+
+/* Phonet socket address structure */
+struct sockaddr_pn {
+	__kernel_sa_family_t spn_family;
+	__u8 spn_obj;
+	__u8 spn_dev;
+	__u8 spn_resource;
+	__u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3];
+} __attribute__((packed));
+
+/* Well known address */
+#define PN_DEV_PC	0x10
+
+static inline __u16 pn_object(__u8 addr, __u16 port)
+{
+	return (addr << 8) | (port & 0x3ff);
+}
+
+static inline __u8 pn_obj(__u16 handle)
+{
+	return handle & 0xff;
+}
+
+static inline __u8 pn_dev(__u16 handle)
+{
+	return handle >> 8;
+}
+
+static inline __u16 pn_port(__u16 handle)
+{
+	return handle & 0x3ff;
+}
+
+static inline __u8 pn_addr(__u16 handle)
+{
+	return (handle >> 8) & 0xfc;
+}
+
+static inline void pn_sockaddr_set_addr(struct sockaddr_pn *spn, __u8 addr)
+{
+	spn->spn_dev &= 0x03;
+	spn->spn_dev |= addr & 0xfc;
+}
+
+static inline void pn_sockaddr_set_port(struct sockaddr_pn *spn, __u16 port)
+{
+	spn->spn_dev &= 0xfc;
+	spn->spn_dev |= (port >> 8) & 0x03;
+	spn->spn_obj = port & 0xff;
+}
+
+static inline void pn_sockaddr_set_object(struct sockaddr_pn *spn,
+						__u16 handle)
+{
+	spn->spn_dev = pn_dev(handle);
+	spn->spn_obj = pn_obj(handle);
+}
+
+static inline void pn_sockaddr_set_resource(struct sockaddr_pn *spn,
+						__u8 resource)
+{
+	spn->spn_resource = resource;
+}
+
+static inline __u8 pn_sockaddr_get_addr(const struct sockaddr_pn *spn)
+{
+	return spn->spn_dev & 0xfc;
+}
+
+static inline __u16 pn_sockaddr_get_port(const struct sockaddr_pn *spn)
+{
+	return ((spn->spn_dev & 0x03) << 8) | spn->spn_obj;
+}
+
+static inline __u16 pn_sockaddr_get_object(const struct sockaddr_pn *spn)
+{
+	return pn_object(spn->spn_dev, spn->spn_obj);
+}
+
+static inline __u8 pn_sockaddr_get_resource(const struct sockaddr_pn *spn)
+{
+	return spn->spn_resource;
+}
+
+/* Phonet device ioctl requests */
+
+#endif /* _UAPILINUX_PHONET_H */
diff --git a/include/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h
similarity index 100%
rename from include/linux/pkt_cls.h
rename to include/uapi/linux/pkt_cls.h
diff --git a/include/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h
similarity index 100%
rename from include/linux/pkt_sched.h
rename to include/uapi/linux/pkt_sched.h
diff --git a/include/uapi/linux/pktcdvd.h b/include/uapi/linux/pktcdvd.h
new file mode 100644
index 0000000..2640b9d
--- /dev/null
+++ b/include/uapi/linux/pktcdvd.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2000 Jens Axboe <axboe@suse.de>
+ * Copyright (C) 2001-2004 Peter Osterlund <petero2@telia.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Packet writing layer for ATAPI and SCSI CD-R, CD-RW, DVD-R, and
+ * DVD-RW devices.
+ *
+ */
+#ifndef _UAPI__PKTCDVD_H
+#define _UAPI__PKTCDVD_H
+
+#include <linux/types.h>
+
+/*
+ * 1 for normal debug messages, 2 is very verbose. 0 to turn it off.
+ */
+#define PACKET_DEBUG		1
+
+#define	MAX_WRITERS		8
+
+#define PKT_RB_POOL_SIZE	512
+
+/*
+ * How long we should hold a non-full packet before starting data gathering.
+ */
+#define PACKET_WAIT_TIME	(HZ * 5 / 1000)
+
+/*
+ * use drive write caching -- we need deferred error handling to be
+ * able to successfully recover with this option (drive will return good
+ * status as soon as the cdb is validated).
+ */
+#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
+#define USE_WCACHING		1
+#else
+#define USE_WCACHING		0
+#endif
+
+/*
+ * No user-servicable parts beyond this point ->
+ */
+
+/*
+ * device types
+ */
+#define PACKET_CDR		1
+#define	PACKET_CDRW		2
+#define PACKET_DVDR		3
+#define PACKET_DVDRW		4
+
+/*
+ * flags
+ */
+#define PACKET_WRITABLE		1	/* pd is writable */
+#define PACKET_NWA_VALID	2	/* next writable address valid */
+#define PACKET_LRA_VALID	3	/* last recorded address valid */
+#define PACKET_MERGE_SEGS	4	/* perform segment merging to keep */
+					/* underlying cdrom device happy */
+
+/*
+ * Disc status -- from READ_DISC_INFO
+ */
+#define PACKET_DISC_EMPTY	0
+#define PACKET_DISC_INCOMPLETE	1
+#define PACKET_DISC_COMPLETE	2
+#define PACKET_DISC_OTHER	3
+
+/*
+ * write type, and corresponding data block type
+ */
+#define PACKET_MODE1		1
+#define PACKET_MODE2		2
+#define PACKET_BLOCK_MODE1	8
+#define PACKET_BLOCK_MODE2	10
+
+/*
+ * Last session/border status
+ */
+#define PACKET_SESSION_EMPTY		0
+#define PACKET_SESSION_INCOMPLETE	1
+#define PACKET_SESSION_RESERVED		2
+#define PACKET_SESSION_COMPLETE		3
+
+#define PACKET_MCN			"4a656e734178626f65323030300000"
+
+#undef PACKET_USE_LS
+
+#define PKT_CTRL_CMD_SETUP	0
+#define PKT_CTRL_CMD_TEARDOWN	1
+#define PKT_CTRL_CMD_STATUS	2
+
+struct pkt_ctrl_command {
+	__u32 command;				/* in: Setup, teardown, status */
+	__u32 dev_index;			/* in/out: Device index */
+	__u32 dev;				/* in/out: Device nr for cdrw device */
+	__u32 pkt_dev;				/* in/out: Device nr for packet device */
+	__u32 num_devices;			/* out: Largest device index + 1 */
+	__u32 padding;				/* Not used */
+};
+
+/*
+ * packet ioctls
+ */
+#define PACKET_IOCTL_MAGIC	('X')
+#define PACKET_CTRL_CMD		_IOWR(PACKET_IOCTL_MAGIC, 1, struct pkt_ctrl_command)
+
+
+#endif /* _UAPI__PKTCDVD_H */
diff --git a/include/uapi/linux/pmu.h b/include/uapi/linux/pmu.h
new file mode 100644
index 0000000..caead36
--- /dev/null
+++ b/include/uapi/linux/pmu.h
@@ -0,0 +1,139 @@
+/*
+ * Definitions for talking to the PMU.  The PMU is a microcontroller
+ * which controls battery charging and system power on PowerBook 3400
+ * and 2400 models as well as the RTC and various other things.
+ *
+ * Copyright (C) 1998 Paul Mackerras.
+ */
+
+#ifndef _UAPI_LINUX_PMU_H
+#define _UAPI_LINUX_PMU_H
+
+#define PMU_DRIVER_VERSION	2
+
+/*
+ * PMU commands
+ */
+#define PMU_POWER_CTRL0		0x10	/* control power of some devices */
+#define PMU_POWER_CTRL		0x11	/* control power of some devices */
+#define PMU_ADB_CMD		0x20	/* send ADB packet */
+#define PMU_ADB_POLL_OFF	0x21	/* disable ADB auto-poll */
+#define PMU_WRITE_NVRAM		0x33	/* write non-volatile RAM */
+#define PMU_READ_NVRAM		0x3b	/* read non-volatile RAM */
+#define PMU_SET_RTC		0x30	/* set real-time clock */
+#define PMU_READ_RTC		0x38	/* read real-time clock */
+#define PMU_SET_VOLBUTTON	0x40	/* set volume up/down position */
+#define PMU_BACKLIGHT_BRIGHT	0x41	/* set backlight brightness */
+#define PMU_GET_VOLBUTTON	0x48	/* get volume up/down position */
+#define PMU_PCEJECT		0x4c	/* eject PC-card from slot */
+#define PMU_BATTERY_STATE	0x6b	/* report battery state etc. */
+#define PMU_SMART_BATTERY_STATE	0x6f	/* report battery state (new way) */
+#define PMU_SET_INTR_MASK	0x70	/* set PMU interrupt mask */
+#define PMU_INT_ACK		0x78	/* read interrupt bits */
+#define PMU_SHUTDOWN		0x7e	/* turn power off */
+#define PMU_CPU_SPEED		0x7d	/* control CPU speed on some models */
+#define PMU_SLEEP		0x7f	/* put CPU to sleep */
+#define PMU_POWER_EVENTS	0x8f	/* Send power-event commands to PMU */
+#define PMU_I2C_CMD		0x9a	/* I2C operations */
+#define PMU_RESET		0xd0	/* reset CPU */
+#define PMU_GET_BRIGHTBUTTON	0xd9	/* report brightness up/down pos */
+#define PMU_GET_COVER		0xdc	/* report cover open/closed */
+#define PMU_SYSTEM_READY	0xdf	/* tell PMU we are awake */
+#define PMU_GET_VERSION		0xea	/* read the PMU version */
+
+/* Bits to use with the PMU_POWER_CTRL0 command */
+#define PMU_POW0_ON		0x80	/* OR this to power ON the device */
+#define PMU_POW0_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
+#define PMU_POW0_HARD_DRIVE	0x04	/* Hard drive power (on wallstreet/lombard ?) */
+
+/* Bits to use with the PMU_POWER_CTRL command */
+#define PMU_POW_ON		0x80	/* OR this to power ON the device */
+#define PMU_POW_OFF		0x00	/* leave bit 7 to 0 to power it OFF */
+#define PMU_POW_BACKLIGHT	0x01	/* backlight power */
+#define PMU_POW_CHARGER		0x02	/* battery charger power */
+#define PMU_POW_IRLED		0x04	/* IR led power (on wallstreet) */
+#define PMU_POW_MEDIABAY	0x08	/* media bay power (wallstreet/lombard ?) */
+
+/* Bits in PMU interrupt and interrupt mask bytes */
+#define PMU_INT_PCEJECT		0x04	/* PC-card eject buttons */
+#define PMU_INT_SNDBRT		0x08	/* sound/brightness up/down buttons */
+#define PMU_INT_ADB		0x10	/* ADB autopoll or reply data */
+#define PMU_INT_BATTERY		0x20	/* Battery state change */
+#define PMU_INT_ENVIRONMENT	0x40	/* Environment interrupts */
+#define PMU_INT_TICK		0x80	/* 1-second tick interrupt */
+
+/* Other bits in PMU interrupt valid when PMU_INT_ADB is set */
+#define PMU_INT_ADB_AUTO	0x04	/* ADB autopoll, when PMU_INT_ADB */
+#define PMU_INT_WAITING_CHARGER	0x01	/* ??? */
+#define PMU_INT_AUTO_SRQ_POLL	0x02	/* ??? */
+
+/* Bits in the environement message (either obtained via PMU_GET_COVER,
+ * or via PMU_INT_ENVIRONMENT on core99 */
+#define PMU_ENV_LID_CLOSED	0x01	/* The lid is closed */
+
+/* I2C related definitions */
+#define PMU_I2C_MODE_SIMPLE	0
+#define PMU_I2C_MODE_STDSUB	1
+#define PMU_I2C_MODE_COMBINED	2
+
+#define PMU_I2C_BUS_STATUS	0
+#define PMU_I2C_BUS_SYSCLK	1
+#define PMU_I2C_BUS_POWER	2
+
+#define PMU_I2C_STATUS_OK	0
+#define PMU_I2C_STATUS_DATAREAD	1
+#define PMU_I2C_STATUS_BUSY	0xfe
+
+
+/* Kind of PMU (model) */
+enum {
+	PMU_UNKNOWN,
+	PMU_OHARE_BASED,	/* 2400, 3400, 3500 (old G3 powerbook) */
+	PMU_HEATHROW_BASED,	/* PowerBook G3 series */
+	PMU_PADDINGTON_BASED,	/* 1999 PowerBook G3 */
+	PMU_KEYLARGO_BASED,	/* Core99 motherboard (PMU99) */
+	PMU_68K_V1,		/* 68K PMU, version 1 */
+	PMU_68K_V2, 		/* 68K PMU, version 2 */
+};
+
+/* PMU PMU_POWER_EVENTS commands */
+enum {
+	PMU_PWR_GET_POWERUP_EVENTS	= 0x00,
+	PMU_PWR_SET_POWERUP_EVENTS	= 0x01,
+	PMU_PWR_CLR_POWERUP_EVENTS	= 0x02,
+	PMU_PWR_GET_WAKEUP_EVENTS	= 0x03,
+	PMU_PWR_SET_WAKEUP_EVENTS	= 0x04,
+	PMU_PWR_CLR_WAKEUP_EVENTS	= 0x05,
+};
+
+/* Power events wakeup bits */
+enum {
+	PMU_PWR_WAKEUP_KEY		= 0x01,	/* Wake on key press */
+	PMU_PWR_WAKEUP_AC_INSERT	= 0x02, /* Wake on AC adapter plug */
+	PMU_PWR_WAKEUP_AC_CHANGE	= 0x04,
+	PMU_PWR_WAKEUP_LID_OPEN		= 0x08,
+	PMU_PWR_WAKEUP_RING		= 0x10,
+};
+	
+/*
+ * Ioctl commands for the /dev/pmu device
+ */
+#include <linux/ioctl.h>
+
+/* no param */
+#define PMU_IOC_SLEEP		_IO('B', 0)
+/* out param: u32*	backlight value: 0 to 15 */
+#define PMU_IOC_GET_BACKLIGHT	_IOR('B', 1, size_t)
+/* in param: u32	backlight value: 0 to 15 */
+#define PMU_IOC_SET_BACKLIGHT	_IOW('B', 2, size_t)
+/* out param: u32*	PMU model */
+#define PMU_IOC_GET_MODEL	_IOR('B', 3, size_t)
+/* out param: u32*	has_adb: 0 or 1 */
+#define PMU_IOC_HAS_ADB		_IOR('B', 4, size_t) 
+/* out param: u32*	can_sleep: 0 or 1 */
+#define PMU_IOC_CAN_SLEEP	_IOR('B', 5, size_t) 
+/* no param, but historically was _IOR('B', 6, 0), meaning 4 bytes */
+#define PMU_IOC_GRAB_BACKLIGHT	_IOR('B', 6, size_t) 
+
+
+#endif /* _UAPI_LINUX_PMU_H */
diff --git a/include/uapi/linux/poll.h b/include/uapi/linux/poll.h
new file mode 100644
index 0000000..2001fed
--- /dev/null
+++ b/include/uapi/linux/poll.h
@@ -0,0 +1 @@
+#include <asm/poll.h>
diff --git a/include/linux/posix_types.h b/include/uapi/linux/posix_types.h
similarity index 100%
rename from include/linux/posix_types.h
rename to include/uapi/linux/posix_types.h
diff --git a/include/linux/ppdev.h b/include/uapi/linux/ppdev.h
similarity index 100%
rename from include/linux/ppdev.h
rename to include/uapi/linux/ppdev.h
diff --git a/include/uapi/linux/ppp-comp.h b/include/uapi/linux/ppp-comp.h
new file mode 100644
index 0000000..0a15bbb
--- /dev/null
+++ b/include/uapi/linux/ppp-comp.h
@@ -0,0 +1,93 @@
+/*
+ * ppp-comp.h - Definitions for doing PPP packet compression.
+ *
+ * Copyright 1994-1998 Paul Mackerras.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ */
+#ifndef _UAPI_NET_PPP_COMP_H
+#define _UAPI_NET_PPP_COMP_H
+
+
+/*
+ * CCP codes.
+ */
+
+#define CCP_CONFREQ	1
+#define CCP_CONFACK	2
+#define CCP_TERMREQ	5
+#define CCP_TERMACK	6
+#define CCP_RESETREQ	14
+#define CCP_RESETACK	15
+
+/*
+ * Max # bytes for a CCP option
+ */
+
+#define CCP_MAX_OPTION_LENGTH	32
+
+/*
+ * Parts of a CCP packet.
+ */
+
+#define CCP_CODE(dp)		((dp)[0])
+#define CCP_ID(dp)		((dp)[1])
+#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
+#define CCP_HDRLEN		4
+
+#define CCP_OPT_CODE(dp)	((dp)[0])
+#define CCP_OPT_LENGTH(dp)	((dp)[1])
+#define CCP_OPT_MINLEN		2
+
+/*
+ * Definitions for BSD-Compress.
+ */
+
+#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
+#define CILEN_BSD_COMPRESS	3	/* length of config. option */
+
+/* Macros for handling the 3rd byte of the BSD-Compress config option. */
+#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
+#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
+#define BSD_CURRENT_VERSION	1		/* current version number */
+#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
+
+#define BSD_MIN_BITS		9	/* smallest code size supported */
+#define BSD_MAX_BITS		15	/* largest code size supported */
+
+/*
+ * Definitions for Deflate.
+ */
+
+#define CI_DEFLATE		26	/* config option for Deflate */
+#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
+#define CILEN_DEFLATE		4	/* length of its config option */
+
+#define DEFLATE_MIN_SIZE	9
+#define DEFLATE_MAX_SIZE	15
+#define DEFLATE_METHOD_VAL	8
+#define DEFLATE_SIZE(x)		(((x) >> 4) + 8)
+#define DEFLATE_METHOD(x)	((x) & 0x0F)
+#define DEFLATE_MAKE_OPT(w)	((((w) - 8) << 4) + DEFLATE_METHOD_VAL)
+#define DEFLATE_CHK_SEQUENCE	0
+
+/*
+ * Definitions for MPPE.
+ */
+
+#define CI_MPPE                18      /* config option for MPPE */
+#define CILEN_MPPE              6      /* length of config option */
+
+/*
+ * Definitions for other, as yet unsupported, compression methods.
+ */
+
+#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
+#define CILEN_PREDICTOR_1	2	/* length of its config option */
+#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
+#define CILEN_PREDICTOR_2	2	/* length of its config option */
+
+
+#endif /* _UAPI_NET_PPP_COMP_H */
diff --git a/include/linux/ppp-ioctl.h b/include/uapi/linux/ppp-ioctl.h
similarity index 100%
rename from include/linux/ppp-ioctl.h
rename to include/uapi/linux/ppp-ioctl.h
diff --git a/include/uapi/linux/ppp_defs.h b/include/uapi/linux/ppp_defs.h
new file mode 100644
index 0000000..283fc05
--- /dev/null
+++ b/include/uapi/linux/ppp_defs.h
@@ -0,0 +1,150 @@
+/*
+ * ppp_defs.h - PPP definitions.
+ *
+ * Copyright 1994-2000 Paul Mackerras.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+
+#ifndef _UAPI_PPP_DEFS_H_
+#define _UAPI_PPP_DEFS_H_
+
+/*
+ * The basic PPP frame.
+ */
+#define PPP_HDRLEN	4	/* octets for standard ppp header */
+#define PPP_FCSLEN	2	/* octets for FCS */
+#define PPP_MRU		1500	/* default MRU = max length of info field */
+
+#define PPP_ADDRESS(p)	(((__u8 *)(p))[0])
+#define PPP_CONTROL(p)	(((__u8 *)(p))[1])
+#define PPP_PROTOCOL(p)	((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
+
+/*
+ * Significant octet values.
+ */
+#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
+#define	PPP_UI		0x03	/* Unnumbered Information */
+#define	PPP_FLAG	0x7e	/* Flag Sequence */
+#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
+#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
+
+/*
+ * Protocol field values.
+ */
+#define PPP_IP		0x21	/* Internet Protocol */
+#define PPP_AT		0x29	/* AppleTalk Protocol */
+#define PPP_IPX		0x2b	/* IPX protocol */
+#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
+#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
+#define PPP_MP		0x3d	/* Multilink protocol */
+#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
+#define PPP_COMPFRAG	0xfb	/* fragment compressed below bundle */
+#define PPP_COMP	0xfd	/* compressed packet */
+#define PPP_MPLS_UC	0x0281	/* Multi Protocol Label Switching - Unicast */
+#define PPP_MPLS_MC	0x0283	/* Multi Protocol Label Switching - Multicast */
+#define PPP_IPCP	0x8021	/* IP Control Protocol */
+#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
+#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
+#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
+#define PPP_CCPFRAG	0x80fb	/* CCP at link level (below MP bundle) */
+#define PPP_CCP		0x80fd	/* Compression Control Protocol */
+#define PPP_MPLSCP	0x80fd	/* MPLS Control Protocol */
+#define PPP_LCP		0xc021	/* Link Control Protocol */
+#define PPP_PAP		0xc023	/* Password Authentication Protocol */
+#define PPP_LQR		0xc025	/* Link Quality Report protocol */
+#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
+#define PPP_CBCP	0xc029	/* Callback Control Protocol */
+
+/*
+ * Values for FCS calculations.
+ */
+
+#define PPP_INITFCS	0xffff	/* Initial FCS value */
+#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
+
+
+/*
+ * Extended asyncmap - allows any character to be escaped.
+ */
+
+typedef __u32		ext_accm[8];
+
+/*
+ * What to do with network protocol (NP) packets.
+ */
+enum NPmode {
+    NPMODE_PASS,		/* pass the packet through */
+    NPMODE_DROP,		/* silently drop the packet */
+    NPMODE_ERROR,		/* return an error */
+    NPMODE_QUEUE		/* save it up for later. */
+};
+
+/*
+ * Statistics for LQRP and pppstats
+ */
+struct pppstat	{
+    __u32	ppp_discards;	/* # frames discarded */
+
+    __u32	ppp_ibytes;	/* bytes received */
+    __u32	ppp_ioctects;	/* bytes received not in error */
+    __u32	ppp_ipackets;	/* packets received */
+    __u32	ppp_ierrors;	/* receive errors */
+    __u32	ppp_ilqrs;	/* # LQR frames received */
+
+    __u32	ppp_obytes;	/* raw bytes sent */
+    __u32	ppp_ooctects;	/* frame bytes sent */
+    __u32	ppp_opackets;	/* packets sent */
+    __u32	ppp_oerrors;	/* transmit errors */ 
+    __u32	ppp_olqrs;	/* # LQR frames sent */
+};
+
+struct vjstat {
+    __u32	vjs_packets;	/* outbound packets */
+    __u32	vjs_compressed;	/* outbound compressed packets */
+    __u32	vjs_searches;	/* searches for connection state */
+    __u32	vjs_misses;	/* times couldn't find conn. state */
+    __u32	vjs_uncompressedin; /* inbound uncompressed packets */
+    __u32	vjs_compressedin;   /* inbound compressed packets */
+    __u32	vjs_errorin;	/* inbound unknown type packets */
+    __u32	vjs_tossed;	/* inbound packets tossed because of error */
+};
+
+struct compstat {
+    __u32	unc_bytes;	/* total uncompressed bytes */
+    __u32	unc_packets;	/* total uncompressed packets */
+    __u32	comp_bytes;	/* compressed bytes */
+    __u32	comp_packets;	/* compressed packets */
+    __u32	inc_bytes;	/* incompressible bytes */
+    __u32	inc_packets;	/* incompressible packets */
+
+    /* the compression ratio is defined as in_count / bytes_out */
+    __u32       in_count;	/* Bytes received */
+    __u32       bytes_out;	/* Bytes transmitted */
+
+    double	ratio;		/* not computed in kernel. */
+};
+
+struct ppp_stats {
+    struct pppstat	p;	/* basic PPP statistics */
+    struct vjstat	vj;	/* VJ header compression statistics */
+};
+
+struct ppp_comp_stats {
+    struct compstat	c;	/* packet compression statistics */
+    struct compstat	d;	/* packet decompression statistics */
+};
+
+/*
+ * The following structure records the time in seconds since
+ * the last NP packet was sent or received.
+ */
+struct ppp_idle {
+    __kernel_time_t xmit_idle;	/* time since last NP packet sent */
+    __kernel_time_t recv_idle;	/* time since last NP packet received */
+};
+
+#endif /* _UAPI_PPP_DEFS_H_ */
diff --git a/include/linux/pps.h b/include/uapi/linux/pps.h
similarity index 100%
rename from include/linux/pps.h
rename to include/uapi/linux/pps.h
diff --git a/include/linux/prctl.h b/include/uapi/linux/prctl.h
similarity index 100%
rename from include/linux/prctl.h
rename to include/uapi/linux/prctl.h
diff --git a/include/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h
similarity index 100%
rename from include/linux/ptp_clock.h
rename to include/uapi/linux/ptp_clock.h
diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h
new file mode 100644
index 0000000..1ef6c05
--- /dev/null
+++ b/include/uapi/linux/ptrace.h
@@ -0,0 +1,81 @@
+#ifndef _UAPI_LINUX_PTRACE_H
+#define _UAPI_LINUX_PTRACE_H
+/* ptrace.h */
+/* structs and defines to help the user use the ptrace system call. */
+
+/* has the defines to get at the registers. */
+
+
+#define PTRACE_TRACEME		   0
+#define PTRACE_PEEKTEXT		   1
+#define PTRACE_PEEKDATA		   2
+#define PTRACE_PEEKUSR		   3
+#define PTRACE_POKETEXT		   4
+#define PTRACE_POKEDATA		   5
+#define PTRACE_POKEUSR		   6
+#define PTRACE_CONT		   7
+#define PTRACE_KILL		   8
+#define PTRACE_SINGLESTEP	   9
+
+#define PTRACE_ATTACH		  16
+#define PTRACE_DETACH		  17
+
+#define PTRACE_SYSCALL		  24
+
+/* 0x4200-0x4300 are reserved for architecture-independent additions.  */
+#define PTRACE_SETOPTIONS	0x4200
+#define PTRACE_GETEVENTMSG	0x4201
+#define PTRACE_GETSIGINFO	0x4202
+#define PTRACE_SETSIGINFO	0x4203
+
+/*
+ * Generic ptrace interface that exports the architecture specific regsets
+ * using the corresponding NT_* types (which are also used in the core dump).
+ * Please note that the NT_PRSTATUS note type in a core dump contains a full
+ * 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
+ * elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
+ * other user_regset flavors, the user_regset layout and the ELF core dump note
+ * payload are exactly the same layout.
+ *
+ * This interface usage is as follows:
+ *	struct iovec iov = { buf, len};
+ *
+ *	ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
+ *
+ * On the successful completion, iov.len will be updated by the kernel,
+ * specifying how much the kernel has written/read to/from the user's iov.buf.
+ */
+#define PTRACE_GETREGSET	0x4204
+#define PTRACE_SETREGSET	0x4205
+
+#define PTRACE_SEIZE		0x4206
+#define PTRACE_INTERRUPT	0x4207
+#define PTRACE_LISTEN		0x4208
+
+/* Wait extended result codes for the above trace options.  */
+#define PTRACE_EVENT_FORK	1
+#define PTRACE_EVENT_VFORK	2
+#define PTRACE_EVENT_CLONE	3
+#define PTRACE_EVENT_EXEC	4
+#define PTRACE_EVENT_VFORK_DONE	5
+#define PTRACE_EVENT_EXIT	6
+#define PTRACE_EVENT_SECCOMP	7
+/* Extended result codes which enabled by means other than options.  */
+#define PTRACE_EVENT_STOP	128
+
+/* Options set using PTRACE_SETOPTIONS or using PTRACE_SEIZE @data param */
+#define PTRACE_O_TRACESYSGOOD	1
+#define PTRACE_O_TRACEFORK	(1 << PTRACE_EVENT_FORK)
+#define PTRACE_O_TRACEVFORK	(1 << PTRACE_EVENT_VFORK)
+#define PTRACE_O_TRACECLONE	(1 << PTRACE_EVENT_CLONE)
+#define PTRACE_O_TRACEEXEC	(1 << PTRACE_EVENT_EXEC)
+#define PTRACE_O_TRACEVFORKDONE	(1 << PTRACE_EVENT_VFORK_DONE)
+#define PTRACE_O_TRACEEXIT	(1 << PTRACE_EVENT_EXIT)
+#define PTRACE_O_TRACESECCOMP	(1 << PTRACE_EVENT_SECCOMP)
+
+#define PTRACE_O_MASK		0x000000ff
+
+#include <asm/ptrace.h>
+
+
+#endif /* _UAPI_LINUX_PTRACE_H */
diff --git a/include/linux/qnx4_fs.h b/include/uapi/linux/qnx4_fs.h
similarity index 100%
rename from include/linux/qnx4_fs.h
rename to include/uapi/linux/qnx4_fs.h
diff --git a/include/linux/qnxtypes.h b/include/uapi/linux/qnxtypes.h
similarity index 100%
rename from include/linux/qnxtypes.h
rename to include/uapi/linux/qnxtypes.h
diff --git a/include/uapi/linux/quota.h b/include/uapi/linux/quota.h
new file mode 100644
index 0000000..3b6cfbe
--- /dev/null
+++ b/include/uapi/linux/quota.h
@@ -0,0 +1,171 @@
+/*
+ * Copyright (c) 1982, 1986 Regents of the University of California.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to Berkeley by
+ * Robert Elz at The University of Melbourne.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _UAPI_LINUX_QUOTA_
+#define _UAPI_LINUX_QUOTA_
+
+#include <linux/errno.h>
+#include <linux/types.h>
+
+#define __DQUOT_VERSION__	"dquot_6.5.2"
+
+#define MAXQUOTAS 2
+#define USRQUOTA  0		/* element used for user quotas */
+#define GRPQUOTA  1		/* element used for group quotas */
+
+/*
+ * Definitions for the default names of the quotas files.
+ */
+#define INITQFNAMES { \
+	"user",    /* USRQUOTA */ \
+	"group",   /* GRPQUOTA */ \
+	"undefined", \
+};
+
+/*
+ * Command definitions for the 'quotactl' system call.
+ * The commands are broken into a main command defined below
+ * and a subcommand that is used to convey the type of
+ * quota that is being manipulated (see above).
+ */
+#define SUBCMDMASK  0x00ff
+#define SUBCMDSHIFT 8
+#define QCMD(cmd, type)  (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK))
+
+#define Q_SYNC     0x800001	/* sync disk copy of a filesystems quotas */
+#define Q_QUOTAON  0x800002	/* turn quotas on */
+#define Q_QUOTAOFF 0x800003	/* turn quotas off */
+#define Q_GETFMT   0x800004	/* get quota format used on given filesystem */
+#define Q_GETINFO  0x800005	/* get information about quota files */
+#define Q_SETINFO  0x800006	/* set information about quota files */
+#define Q_GETQUOTA 0x800007	/* get user quota structure */
+#define Q_SETQUOTA 0x800008	/* set user quota structure */
+
+/* Quota format type IDs */
+#define	QFMT_VFS_OLD 1
+#define	QFMT_VFS_V0 2
+#define QFMT_OCFS2 3
+#define	QFMT_VFS_V1 4
+
+/* Size of block in which space limits are passed through the quota
+ * interface */
+#define QIF_DQBLKSIZE_BITS 10
+#define QIF_DQBLKSIZE (1 << QIF_DQBLKSIZE_BITS)
+
+/*
+ * Quota structure used for communication with userspace via quotactl
+ * Following flags are used to specify which fields are valid
+ */
+enum {
+	QIF_BLIMITS_B = 0,
+	QIF_SPACE_B,
+	QIF_ILIMITS_B,
+	QIF_INODES_B,
+	QIF_BTIME_B,
+	QIF_ITIME_B,
+};
+
+#define QIF_BLIMITS	(1 << QIF_BLIMITS_B)
+#define QIF_SPACE	(1 << QIF_SPACE_B)
+#define QIF_ILIMITS	(1 << QIF_ILIMITS_B)
+#define QIF_INODES	(1 << QIF_INODES_B)
+#define QIF_BTIME	(1 << QIF_BTIME_B)
+#define QIF_ITIME	(1 << QIF_ITIME_B)
+#define QIF_LIMITS	(QIF_BLIMITS | QIF_ILIMITS)
+#define QIF_USAGE	(QIF_SPACE | QIF_INODES)
+#define QIF_TIMES	(QIF_BTIME | QIF_ITIME)
+#define QIF_ALL		(QIF_LIMITS | QIF_USAGE | QIF_TIMES)
+
+struct if_dqblk {
+	__u64 dqb_bhardlimit;
+	__u64 dqb_bsoftlimit;
+	__u64 dqb_curspace;
+	__u64 dqb_ihardlimit;
+	__u64 dqb_isoftlimit;
+	__u64 dqb_curinodes;
+	__u64 dqb_btime;
+	__u64 dqb_itime;
+	__u32 dqb_valid;
+};
+
+/*
+ * Structure used for setting quota information about file via quotactl
+ * Following flags are used to specify which fields are valid
+ */
+#define IIF_BGRACE	1
+#define IIF_IGRACE	2
+#define IIF_FLAGS	4
+#define IIF_ALL		(IIF_BGRACE | IIF_IGRACE | IIF_FLAGS)
+
+struct if_dqinfo {
+	__u64 dqi_bgrace;
+	__u64 dqi_igrace;
+	__u32 dqi_flags;
+	__u32 dqi_valid;
+};
+
+/*
+ * Definitions for quota netlink interface
+ */
+#define QUOTA_NL_NOWARN 0
+#define QUOTA_NL_IHARDWARN 1		/* Inode hardlimit reached */
+#define QUOTA_NL_ISOFTLONGWARN 2 	/* Inode grace time expired */
+#define QUOTA_NL_ISOFTWARN 3		/* Inode softlimit reached */
+#define QUOTA_NL_BHARDWARN 4		/* Block hardlimit reached */
+#define QUOTA_NL_BSOFTLONGWARN 5	/* Block grace time expired */
+#define QUOTA_NL_BSOFTWARN 6		/* Block softlimit reached */
+#define QUOTA_NL_IHARDBELOW 7		/* Usage got below inode hardlimit */
+#define QUOTA_NL_ISOFTBELOW 8		/* Usage got below inode softlimit */
+#define QUOTA_NL_BHARDBELOW 9		/* Usage got below block hardlimit */
+#define QUOTA_NL_BSOFTBELOW 10		/* Usage got below block softlimit */
+
+enum {
+	QUOTA_NL_C_UNSPEC,
+	QUOTA_NL_C_WARNING,
+	__QUOTA_NL_C_MAX,
+};
+#define QUOTA_NL_C_MAX (__QUOTA_NL_C_MAX - 1)
+
+enum {
+	QUOTA_NL_A_UNSPEC,
+	QUOTA_NL_A_QTYPE,
+	QUOTA_NL_A_EXCESS_ID,
+	QUOTA_NL_A_WARNING,
+	QUOTA_NL_A_DEV_MAJOR,
+	QUOTA_NL_A_DEV_MINOR,
+	QUOTA_NL_A_CAUSED_ID,
+	__QUOTA_NL_A_MAX,
+};
+#define QUOTA_NL_A_MAX (__QUOTA_NL_A_MAX - 1)
+
+
+#endif /* _UAPI_LINUX_QUOTA_ */
diff --git a/include/linux/radeonfb.h b/include/uapi/linux/radeonfb.h
similarity index 100%
rename from include/linux/radeonfb.h
rename to include/uapi/linux/radeonfb.h
diff --git a/include/uapi/linux/random.h b/include/uapi/linux/random.h
new file mode 100644
index 0000000..7471b5b
--- /dev/null
+++ b/include/uapi/linux/random.h
@@ -0,0 +1,50 @@
+/*
+ * include/linux/random.h
+ *
+ * Include file for the random number generator.
+ */
+
+#ifndef _UAPI_LINUX_RANDOM_H
+#define _UAPI_LINUX_RANDOM_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/irqnr.h>
+
+/* ioctl()'s for the random number generator */
+
+/* Get the entropy count. */
+#define RNDGETENTCNT	_IOR( 'R', 0x00, int )
+
+/* Add to (or subtract from) the entropy count.  (Superuser only.) */
+#define RNDADDTOENTCNT	_IOW( 'R', 0x01, int )
+
+/* Get the contents of the entropy pool.  (Superuser only.) */
+#define RNDGETPOOL	_IOR( 'R', 0x02, int [2] )
+
+/* 
+ * Write bytes into the entropy pool and add to the entropy count.
+ * (Superuser only.)
+ */
+#define RNDADDENTROPY	_IOW( 'R', 0x03, int [2] )
+
+/* Clear entropy count to 0.  (Superuser only.) */
+#define RNDZAPENTCNT	_IO( 'R', 0x04 )
+
+/* Clear the entropy pool and associated counters.  (Superuser only.) */
+#define RNDCLEARPOOL	_IO( 'R', 0x06 )
+
+struct rand_pool_info {
+	int	entropy_count;
+	int	buf_size;
+	__u32	buf[0];
+};
+
+struct rnd_state {
+	__u32 s1, s2, s3;
+};
+
+/* Exported functions */
+
+
+#endif /* _UAPI_LINUX_RANDOM_H */
diff --git a/include/linux/raw.h b/include/uapi/linux/raw.h
similarity index 100%
rename from include/linux/raw.h
rename to include/uapi/linux/raw.h
diff --git a/include/linux/rds.h b/include/uapi/linux/rds.h
similarity index 100%
rename from include/linux/rds.h
rename to include/uapi/linux/rds.h
diff --git a/include/uapi/linux/reboot.h b/include/uapi/linux/reboot.h
new file mode 100644
index 0000000..09d056d
--- /dev/null
+++ b/include/uapi/linux/reboot.h
@@ -0,0 +1,39 @@
+#ifndef _UAPI_LINUX_REBOOT_H
+#define _UAPI_LINUX_REBOOT_H
+
+/*
+ * Magic values required to use _reboot() system call.
+ */
+
+#define	LINUX_REBOOT_MAGIC1	0xfee1dead
+#define	LINUX_REBOOT_MAGIC2	672274793
+#define	LINUX_REBOOT_MAGIC2A	85072278
+#define	LINUX_REBOOT_MAGIC2B	369367448
+#define	LINUX_REBOOT_MAGIC2C	537993216
+
+
+/*
+ * Commands accepted by the _reboot() system call.
+ *
+ * RESTART     Restart system using default command and mode.
+ * HALT        Stop OS and give system control to ROM monitor, if any.
+ * CAD_ON      Ctrl-Alt-Del sequence causes RESTART command.
+ * CAD_OFF     Ctrl-Alt-Del sequence sends SIGINT to init task.
+ * POWER_OFF   Stop OS and remove all power from system, if possible.
+ * RESTART2    Restart system using given command string.
+ * SW_SUSPEND  Suspend system using software suspend if compiled in.
+ * KEXEC       Restart system using a previously loaded Linux kernel
+ */
+
+#define	LINUX_REBOOT_CMD_RESTART	0x01234567
+#define	LINUX_REBOOT_CMD_HALT		0xCDEF0123
+#define	LINUX_REBOOT_CMD_CAD_ON		0x89ABCDEF
+#define	LINUX_REBOOT_CMD_CAD_OFF	0x00000000
+#define	LINUX_REBOOT_CMD_POWER_OFF	0x4321FEDC
+#define	LINUX_REBOOT_CMD_RESTART2	0xA1B2C3D4
+#define	LINUX_REBOOT_CMD_SW_SUSPEND	0xD000FCE2
+#define	LINUX_REBOOT_CMD_KEXEC		0x45584543
+
+
+
+#endif /* _UAPI_LINUX_REBOOT_H */
diff --git a/include/linux/reiserfs_fs.h b/include/uapi/linux/reiserfs_fs.h
similarity index 100%
rename from include/linux/reiserfs_fs.h
rename to include/uapi/linux/reiserfs_fs.h
diff --git a/include/linux/reiserfs_xattr.h b/include/uapi/linux/reiserfs_xattr.h
similarity index 100%
rename from include/linux/reiserfs_xattr.h
rename to include/uapi/linux/reiserfs_xattr.h
diff --git a/include/uapi/linux/resource.h b/include/uapi/linux/resource.h
new file mode 100644
index 0000000..e0ed284
--- /dev/null
+++ b/include/uapi/linux/resource.h
@@ -0,0 +1,80 @@
+#ifndef _UAPI_LINUX_RESOURCE_H
+#define _UAPI_LINUX_RESOURCE_H
+
+#include <linux/time.h>
+#include <linux/types.h>
+
+/*
+ * Resource control/accounting header file for linux
+ */
+
+/*
+ * Definition of struct rusage taken from BSD 4.3 Reno
+ * 
+ * We don't support all of these yet, but we might as well have them....
+ * Otherwise, each time we add new items, programs which depend on this
+ * structure will lose.  This reduces the chances of that happening.
+ */
+#define	RUSAGE_SELF	0
+#define	RUSAGE_CHILDREN	(-1)
+#define RUSAGE_BOTH	(-2)		/* sys_wait4() uses this */
+#define	RUSAGE_THREAD	1		/* only the calling thread */
+
+struct	rusage {
+	struct timeval ru_utime;	/* user time used */
+	struct timeval ru_stime;	/* system time used */
+	long	ru_maxrss;		/* maximum resident set size */
+	long	ru_ixrss;		/* integral shared memory size */
+	long	ru_idrss;		/* integral unshared data size */
+	long	ru_isrss;		/* integral unshared stack size */
+	long	ru_minflt;		/* page reclaims */
+	long	ru_majflt;		/* page faults */
+	long	ru_nswap;		/* swaps */
+	long	ru_inblock;		/* block input operations */
+	long	ru_oublock;		/* block output operations */
+	long	ru_msgsnd;		/* messages sent */
+	long	ru_msgrcv;		/* messages received */
+	long	ru_nsignals;		/* signals received */
+	long	ru_nvcsw;		/* voluntary context switches */
+	long	ru_nivcsw;		/* involuntary " */
+};
+
+struct rlimit {
+	unsigned long	rlim_cur;
+	unsigned long	rlim_max;
+};
+
+#define RLIM64_INFINITY		(~0ULL)
+
+struct rlimit64 {
+	__u64 rlim_cur;
+	__u64 rlim_max;
+};
+
+#define	PRIO_MIN	(-20)
+#define	PRIO_MAX	20
+
+#define	PRIO_PROCESS	0
+#define	PRIO_PGRP	1
+#define	PRIO_USER	2
+
+/*
+ * Limit the stack by to some sane default: root can always
+ * increase this limit if needed..  8MB seems reasonable.
+ */
+#define _STK_LIM	(8*1024*1024)
+
+/*
+ * GPG2 wants 64kB of mlocked memory, to make sure pass phrases
+ * and other sensitive information are never written to disk.
+ */
+#define MLOCK_LIMIT	((PAGE_SIZE > 64*1024) ? PAGE_SIZE : 64*1024)
+
+/*
+ * Due to binary compatibility, the actual resource numbers
+ * may be different for different linux versions..
+ */
+#include <asm/resource.h>
+
+
+#endif /* _UAPI_LINUX_RESOURCE_H */
diff --git a/include/uapi/linux/rfkill.h b/include/uapi/linux/rfkill.h
new file mode 100644
index 0000000..2753c6c
--- /dev/null
+++ b/include/uapi/linux/rfkill.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2006 - 2007 Ivo van Doorn
+ * Copyright (C) 2007 Dmitry Torokhov
+ * Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef _UAPI__RFKILL_H
+#define _UAPI__RFKILL_H
+
+
+#include <linux/types.h>
+
+/* define userspace visible states */
+#define RFKILL_STATE_SOFT_BLOCKED	0
+#define RFKILL_STATE_UNBLOCKED		1
+#define RFKILL_STATE_HARD_BLOCKED	2
+
+/**
+ * enum rfkill_type - type of rfkill switch.
+ *
+ * @RFKILL_TYPE_ALL: toggles all switches (requests only - not a switch type)
+ * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device.
+ * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device.
+ * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
+ * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
+ * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ * @RFKILL_TYPE_GPS: switch is on a GPS device.
+ * @RFKILL_TYPE_FM: switch is on a FM radio device.
+ * @NUM_RFKILL_TYPES: number of defined rfkill types
+ */
+enum rfkill_type {
+	RFKILL_TYPE_ALL = 0,
+	RFKILL_TYPE_WLAN,
+	RFKILL_TYPE_BLUETOOTH,
+	RFKILL_TYPE_UWB,
+	RFKILL_TYPE_WIMAX,
+	RFKILL_TYPE_WWAN,
+	RFKILL_TYPE_GPS,
+	RFKILL_TYPE_FM,
+	NUM_RFKILL_TYPES,
+};
+
+/**
+ * enum rfkill_operation - operation types
+ * @RFKILL_OP_ADD: a device was added
+ * @RFKILL_OP_DEL: a device was removed
+ * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device
+ * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all)
+ */
+enum rfkill_operation {
+	RFKILL_OP_ADD = 0,
+	RFKILL_OP_DEL,
+	RFKILL_OP_CHANGE,
+	RFKILL_OP_CHANGE_ALL,
+};
+
+/**
+ * struct rfkill_event - events for userspace on /dev/rfkill
+ * @idx: index of dev rfkill
+ * @type: type of the rfkill struct
+ * @op: operation code
+ * @hard: hard state (0/1)
+ * @soft: soft state (0/1)
+ *
+ * Structure used for userspace communication on /dev/rfkill,
+ * used for events from the kernel and control to the kernel.
+ */
+struct rfkill_event {
+	__u32 idx;
+	__u8  type;
+	__u8  op;
+	__u8  soft, hard;
+} __attribute__((packed));
+
+/*
+ * We are planning to be backward and forward compatible with changes
+ * to the event struct, by adding new, optional, members at the end.
+ * When reading an event (whether the kernel from userspace or vice
+ * versa) we need to accept anything that's at least as large as the
+ * version 1 event size, but might be able to accept other sizes in
+ * the future.
+ *
+ * One exception is the kernel -- we already have two event sizes in
+ * that we've made the 'hard' member optional since our only option
+ * is to ignore it anyway.
+ */
+#define RFKILL_EVENT_SIZE_V1	8
+
+/* ioctl for turning off rfkill-input (if present) */
+#define RFKILL_IOC_MAGIC	'R'
+#define RFKILL_IOC_NOINPUT	1
+#define RFKILL_IOCTL_NOINPUT	_IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT)
+
+/* and that's all userspace gets */
+
+#endif /* _UAPI__RFKILL_H */
diff --git a/include/linux/romfs_fs.h b/include/uapi/linux/romfs_fs.h
similarity index 100%
rename from include/linux/romfs_fs.h
rename to include/uapi/linux/romfs_fs.h
diff --git a/include/linux/rose.h b/include/uapi/linux/rose.h
similarity index 100%
rename from include/linux/rose.h
rename to include/uapi/linux/rose.h
diff --git a/include/linux/route.h b/include/uapi/linux/route.h
similarity index 100%
rename from include/linux/route.h
rename to include/uapi/linux/route.h
diff --git a/include/uapi/linux/rtc.h b/include/uapi/linux/rtc.h
new file mode 100644
index 0000000..f8c82e6
--- /dev/null
+++ b/include/uapi/linux/rtc.h
@@ -0,0 +1,107 @@
+/*
+ * Generic RTC interface.
+ * This version contains the part of the user interface to the Real Time Clock
+ * service. It is used with both the legacy mc146818 and also  EFI
+ * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out
+ * from <linux/mc146818rtc.h> to this file for 2.4 kernels.
+ *
+ * Copyright (C) 1999 Hewlett-Packard Co.
+ * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
+ */
+#ifndef _UAPI_LINUX_RTC_H_
+#define _UAPI_LINUX_RTC_H_
+
+/*
+ * The struct used to pass data via the following ioctl. Similar to the
+ * struct tm in <time.h>, but it needs to be here so that the kernel
+ * source is self contained, allowing cross-compiles, etc. etc.
+ */
+
+struct rtc_time {
+	int tm_sec;
+	int tm_min;
+	int tm_hour;
+	int tm_mday;
+	int tm_mon;
+	int tm_year;
+	int tm_wday;
+	int tm_yday;
+	int tm_isdst;
+};
+
+/*
+ * This data structure is inspired by the EFI (v0.92) wakeup
+ * alarm API.
+ */
+struct rtc_wkalrm {
+	unsigned char enabled;	/* 0 = alarm disabled, 1 = alarm enabled */
+	unsigned char pending;  /* 0 = alarm not pending, 1 = alarm pending */
+	struct rtc_time time;	/* time the alarm is set to */
+};
+
+/*
+ * Data structure to control PLL correction some better RTC feature
+ * pll_value is used to get or set current value of correction,
+ * the rest of the struct is used to query HW capabilities.
+ * This is modeled after the RTC used in Q40/Q60 computers but
+ * should be sufficiently flexible for other devices
+ *
+ * +ve pll_value means clock will run faster by
+ *   pll_value*pll_posmult/pll_clock
+ * -ve pll_value means clock will run slower by
+ *   pll_value*pll_negmult/pll_clock
+ */
+
+struct rtc_pll_info {
+	int pll_ctrl;       /* placeholder for fancier control */
+	int pll_value;      /* get/set correction value */
+	int pll_max;        /* max +ve (faster) adjustment value */
+	int pll_min;        /* max -ve (slower) adjustment value */
+	int pll_posmult;    /* factor for +ve correction */
+	int pll_negmult;    /* factor for -ve correction */
+	long pll_clock;     /* base PLL frequency */
+};
+
+/*
+ * ioctl calls that are permitted to the /dev/rtc interface, if
+ * any of the RTC drivers are enabled.
+ */
+
+#define RTC_AIE_ON	_IO('p', 0x01)	/* Alarm int. enable on		*/
+#define RTC_AIE_OFF	_IO('p', 0x02)	/* ... off			*/
+#define RTC_UIE_ON	_IO('p', 0x03)	/* Update int. enable on	*/
+#define RTC_UIE_OFF	_IO('p', 0x04)	/* ... off			*/
+#define RTC_PIE_ON	_IO('p', 0x05)	/* Periodic int. enable on	*/
+#define RTC_PIE_OFF	_IO('p', 0x06)	/* ... off			*/
+#define RTC_WIE_ON	_IO('p', 0x0f)  /* Watchdog int. enable on	*/
+#define RTC_WIE_OFF	_IO('p', 0x10)  /* ... off			*/
+
+#define RTC_ALM_SET	_IOW('p', 0x07, struct rtc_time) /* Set alarm time  */
+#define RTC_ALM_READ	_IOR('p', 0x08, struct rtc_time) /* Read alarm time */
+#define RTC_RD_TIME	_IOR('p', 0x09, struct rtc_time) /* Read RTC time   */
+#define RTC_SET_TIME	_IOW('p', 0x0a, struct rtc_time) /* Set RTC time    */
+#define RTC_IRQP_READ	_IOR('p', 0x0b, unsigned long)	 /* Read IRQ rate   */
+#define RTC_IRQP_SET	_IOW('p', 0x0c, unsigned long)	 /* Set IRQ rate    */
+#define RTC_EPOCH_READ	_IOR('p', 0x0d, unsigned long)	 /* Read epoch      */
+#define RTC_EPOCH_SET	_IOW('p', 0x0e, unsigned long)	 /* Set epoch       */
+
+#define RTC_WKALM_SET	_IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
+#define RTC_WKALM_RD	_IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
+
+#define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
+#define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
+
+#define RTC_VL_READ	_IOR('p', 0x13, int)	/* Voltage low detector */
+#define RTC_VL_CLR	_IO('p', 0x14)		/* Clear voltage low information */
+
+/* interrupt flags */
+#define RTC_IRQF 0x80	/* Any of the following is active */
+#define RTC_PF 0x40	/* Periodic interrupt */
+#define RTC_AF 0x20	/* Alarm interrupt */
+#define RTC_UF 0x10	/* Update interrupt for 1Hz RTC */
+
+
+#define RTC_MAX_FREQ	8192
+
+
+#endif /* _UAPI_LINUX_RTC_H_ */
diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h
new file mode 100644
index 0000000..fcd768b
--- /dev/null
+++ b/include/uapi/linux/rtnetlink.h
@@ -0,0 +1,612 @@
+#ifndef _UAPI__LINUX_RTNETLINK_H
+#define _UAPI__LINUX_RTNETLINK_H
+
+#include <linux/types.h>
+#include <linux/netlink.h>
+#include <linux/if_link.h>
+#include <linux/if_addr.h>
+#include <linux/neighbour.h>
+
+/* rtnetlink families. Values up to 127 are reserved for real address
+ * families, values above 128 may be used arbitrarily.
+ */
+#define RTNL_FAMILY_IPMR		128
+#define RTNL_FAMILY_IP6MR		129
+#define RTNL_FAMILY_MAX			129
+
+/****
+ *		Routing/neighbour discovery messages.
+ ****/
+
+/* Types of messages */
+
+enum {
+	RTM_BASE	= 16,
+#define RTM_BASE	RTM_BASE
+
+	RTM_NEWLINK	= 16,
+#define RTM_NEWLINK	RTM_NEWLINK
+	RTM_DELLINK,
+#define RTM_DELLINK	RTM_DELLINK
+	RTM_GETLINK,
+#define RTM_GETLINK	RTM_GETLINK
+	RTM_SETLINK,
+#define RTM_SETLINK	RTM_SETLINK
+
+	RTM_NEWADDR	= 20,
+#define RTM_NEWADDR	RTM_NEWADDR
+	RTM_DELADDR,
+#define RTM_DELADDR	RTM_DELADDR
+	RTM_GETADDR,
+#define RTM_GETADDR	RTM_GETADDR
+
+	RTM_NEWROUTE	= 24,
+#define RTM_NEWROUTE	RTM_NEWROUTE
+	RTM_DELROUTE,
+#define RTM_DELROUTE	RTM_DELROUTE
+	RTM_GETROUTE,
+#define RTM_GETROUTE	RTM_GETROUTE
+
+	RTM_NEWNEIGH	= 28,
+#define RTM_NEWNEIGH	RTM_NEWNEIGH
+	RTM_DELNEIGH,
+#define RTM_DELNEIGH	RTM_DELNEIGH
+	RTM_GETNEIGH,
+#define RTM_GETNEIGH	RTM_GETNEIGH
+
+	RTM_NEWRULE	= 32,
+#define RTM_NEWRULE	RTM_NEWRULE
+	RTM_DELRULE,
+#define RTM_DELRULE	RTM_DELRULE
+	RTM_GETRULE,
+#define RTM_GETRULE	RTM_GETRULE
+
+	RTM_NEWQDISC	= 36,
+#define RTM_NEWQDISC	RTM_NEWQDISC
+	RTM_DELQDISC,
+#define RTM_DELQDISC	RTM_DELQDISC
+	RTM_GETQDISC,
+#define RTM_GETQDISC	RTM_GETQDISC
+
+	RTM_NEWTCLASS	= 40,
+#define RTM_NEWTCLASS	RTM_NEWTCLASS
+	RTM_DELTCLASS,
+#define RTM_DELTCLASS	RTM_DELTCLASS
+	RTM_GETTCLASS,
+#define RTM_GETTCLASS	RTM_GETTCLASS
+
+	RTM_NEWTFILTER	= 44,
+#define RTM_NEWTFILTER	RTM_NEWTFILTER
+	RTM_DELTFILTER,
+#define RTM_DELTFILTER	RTM_DELTFILTER
+	RTM_GETTFILTER,
+#define RTM_GETTFILTER	RTM_GETTFILTER
+
+	RTM_NEWACTION	= 48,
+#define RTM_NEWACTION   RTM_NEWACTION
+	RTM_DELACTION,
+#define RTM_DELACTION   RTM_DELACTION
+	RTM_GETACTION,
+#define RTM_GETACTION   RTM_GETACTION
+
+	RTM_NEWPREFIX	= 52,
+#define RTM_NEWPREFIX	RTM_NEWPREFIX
+
+	RTM_GETMULTICAST = 58,
+#define RTM_GETMULTICAST RTM_GETMULTICAST
+
+	RTM_GETANYCAST	= 62,
+#define RTM_GETANYCAST	RTM_GETANYCAST
+
+	RTM_NEWNEIGHTBL	= 64,
+#define RTM_NEWNEIGHTBL	RTM_NEWNEIGHTBL
+	RTM_GETNEIGHTBL	= 66,
+#define RTM_GETNEIGHTBL	RTM_GETNEIGHTBL
+	RTM_SETNEIGHTBL,
+#define RTM_SETNEIGHTBL	RTM_SETNEIGHTBL
+
+	RTM_NEWNDUSEROPT = 68,
+#define RTM_NEWNDUSEROPT RTM_NEWNDUSEROPT
+
+	RTM_NEWADDRLABEL = 72,
+#define RTM_NEWADDRLABEL RTM_NEWADDRLABEL
+	RTM_DELADDRLABEL,
+#define RTM_DELADDRLABEL RTM_DELADDRLABEL
+	RTM_GETADDRLABEL,
+#define RTM_GETADDRLABEL RTM_GETADDRLABEL
+
+	RTM_GETDCB = 78,
+#define RTM_GETDCB RTM_GETDCB
+	RTM_SETDCB,
+#define RTM_SETDCB RTM_SETDCB
+
+	__RTM_MAX,
+#define RTM_MAX		(((__RTM_MAX + 3) & ~3) - 1)
+};
+
+#define RTM_NR_MSGTYPES	(RTM_MAX + 1 - RTM_BASE)
+#define RTM_NR_FAMILIES	(RTM_NR_MSGTYPES >> 2)
+#define RTM_FAM(cmd)	(((cmd) - RTM_BASE) >> 2)
+
+/* 
+   Generic structure for encapsulation of optional route information.
+   It is reminiscent of sockaddr, but with sa_family replaced
+   with attribute type.
+ */
+
+struct rtattr {
+	unsigned short	rta_len;
+	unsigned short	rta_type;
+};
+
+/* Macros to handle rtattributes */
+
+#define RTA_ALIGNTO	4
+#define RTA_ALIGN(len) ( ((len)+RTA_ALIGNTO-1) & ~(RTA_ALIGNTO-1) )
+#define RTA_OK(rta,len) ((len) >= (int)sizeof(struct rtattr) && \
+			 (rta)->rta_len >= sizeof(struct rtattr) && \
+			 (rta)->rta_len <= (len))
+#define RTA_NEXT(rta,attrlen)	((attrlen) -= RTA_ALIGN((rta)->rta_len), \
+				 (struct rtattr*)(((char*)(rta)) + RTA_ALIGN((rta)->rta_len)))
+#define RTA_LENGTH(len)	(RTA_ALIGN(sizeof(struct rtattr)) + (len))
+#define RTA_SPACE(len)	RTA_ALIGN(RTA_LENGTH(len))
+#define RTA_DATA(rta)   ((void*)(((char*)(rta)) + RTA_LENGTH(0)))
+#define RTA_PAYLOAD(rta) ((int)((rta)->rta_len) - RTA_LENGTH(0))
+
+
+
+
+/******************************************************************************
+ *		Definitions used in routing table administration.
+ ****/
+
+struct rtmsg {
+	unsigned char		rtm_family;
+	unsigned char		rtm_dst_len;
+	unsigned char		rtm_src_len;
+	unsigned char		rtm_tos;
+
+	unsigned char		rtm_table;	/* Routing table id */
+	unsigned char		rtm_protocol;	/* Routing protocol; see below	*/
+	unsigned char		rtm_scope;	/* See below */	
+	unsigned char		rtm_type;	/* See below	*/
+
+	unsigned		rtm_flags;
+};
+
+/* rtm_type */
+
+enum {
+	RTN_UNSPEC,
+	RTN_UNICAST,		/* Gateway or direct route	*/
+	RTN_LOCAL,		/* Accept locally		*/
+	RTN_BROADCAST,		/* Accept locally as broadcast,
+				   send as broadcast */
+	RTN_ANYCAST,		/* Accept locally as broadcast,
+				   but send as unicast */
+	RTN_MULTICAST,		/* Multicast route		*/
+	RTN_BLACKHOLE,		/* Drop				*/
+	RTN_UNREACHABLE,	/* Destination is unreachable   */
+	RTN_PROHIBIT,		/* Administratively prohibited	*/
+	RTN_THROW,		/* Not in this table		*/
+	RTN_NAT,		/* Translate this address	*/
+	RTN_XRESOLVE,		/* Use external resolver	*/
+	__RTN_MAX
+};
+
+#define RTN_MAX (__RTN_MAX - 1)
+
+
+/* rtm_protocol */
+
+#define RTPROT_UNSPEC	0
+#define RTPROT_REDIRECT	1	/* Route installed by ICMP redirects;
+				   not used by current IPv4 */
+#define RTPROT_KERNEL	2	/* Route installed by kernel		*/
+#define RTPROT_BOOT	3	/* Route installed during boot		*/
+#define RTPROT_STATIC	4	/* Route installed by administrator	*/
+
+/* Values of protocol >= RTPROT_STATIC are not interpreted by kernel;
+   they are just passed from user and back as is.
+   It will be used by hypothetical multiple routing daemons.
+   Note that protocol values should be standardized in order to
+   avoid conflicts.
+ */
+
+#define RTPROT_GATED	8	/* Apparently, GateD */
+#define RTPROT_RA	9	/* RDISC/ND router advertisements */
+#define RTPROT_MRT	10	/* Merit MRT */
+#define RTPROT_ZEBRA	11	/* Zebra */
+#define RTPROT_BIRD	12	/* BIRD */
+#define RTPROT_DNROUTED	13	/* DECnet routing daemon */
+#define RTPROT_XORP	14	/* XORP */
+#define RTPROT_NTK	15	/* Netsukuku */
+#define RTPROT_DHCP	16      /* DHCP client */
+
+/* rtm_scope
+
+   Really it is not scope, but sort of distance to the destination.
+   NOWHERE are reserved for not existing destinations, HOST is our
+   local addresses, LINK are destinations, located on directly attached
+   link and UNIVERSE is everywhere in the Universe.
+
+   Intermediate values are also possible f.e. interior routes
+   could be assigned a value between UNIVERSE and LINK.
+*/
+
+enum rt_scope_t {
+	RT_SCOPE_UNIVERSE=0,
+/* User defined values  */
+	RT_SCOPE_SITE=200,
+	RT_SCOPE_LINK=253,
+	RT_SCOPE_HOST=254,
+	RT_SCOPE_NOWHERE=255
+};
+
+/* rtm_flags */
+
+#define RTM_F_NOTIFY		0x100	/* Notify user of route change	*/
+#define RTM_F_CLONED		0x200	/* This route is cloned		*/
+#define RTM_F_EQUALIZE		0x400	/* Multipath equalizer: NI	*/
+#define RTM_F_PREFIX		0x800	/* Prefix addresses		*/
+
+/* Reserved table identifiers */
+
+enum rt_class_t {
+	RT_TABLE_UNSPEC=0,
+/* User defined values */
+	RT_TABLE_COMPAT=252,
+	RT_TABLE_DEFAULT=253,
+	RT_TABLE_MAIN=254,
+	RT_TABLE_LOCAL=255,
+	RT_TABLE_MAX=0xFFFFFFFF
+};
+
+
+/* Routing message attributes */
+
+enum rtattr_type_t {
+	RTA_UNSPEC,
+	RTA_DST,
+	RTA_SRC,
+	RTA_IIF,
+	RTA_OIF,
+	RTA_GATEWAY,
+	RTA_PRIORITY,
+	RTA_PREFSRC,
+	RTA_METRICS,
+	RTA_MULTIPATH,
+	RTA_PROTOINFO, /* no longer used */
+	RTA_FLOW,
+	RTA_CACHEINFO,
+	RTA_SESSION, /* no longer used */
+	RTA_MP_ALGO, /* no longer used */
+	RTA_TABLE,
+	RTA_MARK,
+	__RTA_MAX
+};
+
+#define RTA_MAX (__RTA_MAX - 1)
+
+#define RTM_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct rtmsg))))
+#define RTM_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct rtmsg))
+
+/* RTM_MULTIPATH --- array of struct rtnexthop.
+ *
+ * "struct rtnexthop" describes all necessary nexthop information,
+ * i.e. parameters of path to a destination via this nexthop.
+ *
+ * At the moment it is impossible to set different prefsrc, mtu, window
+ * and rtt for different paths from multipath.
+ */
+
+struct rtnexthop {
+	unsigned short		rtnh_len;
+	unsigned char		rtnh_flags;
+	unsigned char		rtnh_hops;
+	int			rtnh_ifindex;
+};
+
+/* rtnh_flags */
+
+#define RTNH_F_DEAD		1	/* Nexthop is dead (used by multipath)	*/
+#define RTNH_F_PERVASIVE	2	/* Do recursive gateway lookup	*/
+#define RTNH_F_ONLINK		4	/* Gateway is forced on link	*/
+
+/* Macros to handle hexthops */
+
+#define RTNH_ALIGNTO	4
+#define RTNH_ALIGN(len) ( ((len)+RTNH_ALIGNTO-1) & ~(RTNH_ALIGNTO-1) )
+#define RTNH_OK(rtnh,len) ((rtnh)->rtnh_len >= sizeof(struct rtnexthop) && \
+			   ((int)(rtnh)->rtnh_len) <= (len))
+#define RTNH_NEXT(rtnh)	((struct rtnexthop*)(((char*)(rtnh)) + RTNH_ALIGN((rtnh)->rtnh_len)))
+#define RTNH_LENGTH(len) (RTNH_ALIGN(sizeof(struct rtnexthop)) + (len))
+#define RTNH_SPACE(len)	RTNH_ALIGN(RTNH_LENGTH(len))
+#define RTNH_DATA(rtnh)   ((struct rtattr*)(((char*)(rtnh)) + RTNH_LENGTH(0)))
+
+/* RTM_CACHEINFO */
+
+struct rta_cacheinfo {
+	__u32	rta_clntref;
+	__u32	rta_lastuse;
+	__s32	rta_expires;
+	__u32	rta_error;
+	__u32	rta_used;
+
+#define RTNETLINK_HAVE_PEERINFO 1
+	__u32	rta_id;
+	__u32	rta_ts;
+	__u32	rta_tsage;
+};
+
+/* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
+
+enum {
+	RTAX_UNSPEC,
+#define RTAX_UNSPEC RTAX_UNSPEC
+	RTAX_LOCK,
+#define RTAX_LOCK RTAX_LOCK
+	RTAX_MTU,
+#define RTAX_MTU RTAX_MTU
+	RTAX_WINDOW,
+#define RTAX_WINDOW RTAX_WINDOW
+	RTAX_RTT,
+#define RTAX_RTT RTAX_RTT
+	RTAX_RTTVAR,
+#define RTAX_RTTVAR RTAX_RTTVAR
+	RTAX_SSTHRESH,
+#define RTAX_SSTHRESH RTAX_SSTHRESH
+	RTAX_CWND,
+#define RTAX_CWND RTAX_CWND
+	RTAX_ADVMSS,
+#define RTAX_ADVMSS RTAX_ADVMSS
+	RTAX_REORDERING,
+#define RTAX_REORDERING RTAX_REORDERING
+	RTAX_HOPLIMIT,
+#define RTAX_HOPLIMIT RTAX_HOPLIMIT
+	RTAX_INITCWND,
+#define RTAX_INITCWND RTAX_INITCWND
+	RTAX_FEATURES,
+#define RTAX_FEATURES RTAX_FEATURES
+	RTAX_RTO_MIN,
+#define RTAX_RTO_MIN RTAX_RTO_MIN
+	RTAX_INITRWND,
+#define RTAX_INITRWND RTAX_INITRWND
+	__RTAX_MAX
+};
+
+#define RTAX_MAX (__RTAX_MAX - 1)
+
+#define RTAX_FEATURE_ECN	0x00000001
+#define RTAX_FEATURE_SACK	0x00000002
+#define RTAX_FEATURE_TIMESTAMP	0x00000004
+#define RTAX_FEATURE_ALLFRAG	0x00000008
+
+struct rta_session {
+	__u8	proto;
+	__u8	pad1;
+	__u16	pad2;
+
+	union {
+		struct {
+			__u16	sport;
+			__u16	dport;
+		} ports;
+
+		struct {
+			__u8	type;
+			__u8	code;
+			__u16	ident;
+		} icmpt;
+
+		__u32		spi;
+	} u;
+};
+
+/****
+ *		General form of address family dependent message.
+ ****/
+
+struct rtgenmsg {
+	unsigned char		rtgen_family;
+};
+
+/*****************************************************************
+ *		Link layer specific messages.
+ ****/
+
+/* struct ifinfomsg
+ * passes link level specific information, not dependent
+ * on network protocol.
+ */
+
+struct ifinfomsg {
+	unsigned char	ifi_family;
+	unsigned char	__ifi_pad;
+	unsigned short	ifi_type;		/* ARPHRD_* */
+	int		ifi_index;		/* Link index	*/
+	unsigned	ifi_flags;		/* IFF_* flags	*/
+	unsigned	ifi_change;		/* IFF_* change mask */
+};
+
+/********************************************************************
+ *		prefix information 
+ ****/
+
+struct prefixmsg {
+	unsigned char	prefix_family;
+	unsigned char	prefix_pad1;
+	unsigned short	prefix_pad2;
+	int		prefix_ifindex;
+	unsigned char	prefix_type;
+	unsigned char	prefix_len;
+	unsigned char	prefix_flags;
+	unsigned char	prefix_pad3;
+};
+
+enum 
+{
+	PREFIX_UNSPEC,
+	PREFIX_ADDRESS,
+	PREFIX_CACHEINFO,
+	__PREFIX_MAX
+};
+
+#define PREFIX_MAX	(__PREFIX_MAX - 1)
+
+struct prefix_cacheinfo {
+	__u32	preferred_time;
+	__u32	valid_time;
+};
+
+
+/*****************************************************************
+ *		Traffic control messages.
+ ****/
+
+struct tcmsg {
+	unsigned char	tcm_family;
+	unsigned char	tcm__pad1;
+	unsigned short	tcm__pad2;
+	int		tcm_ifindex;
+	__u32		tcm_handle;
+	__u32		tcm_parent;
+	__u32		tcm_info;
+};
+
+enum {
+	TCA_UNSPEC,
+	TCA_KIND,
+	TCA_OPTIONS,
+	TCA_STATS,
+	TCA_XSTATS,
+	TCA_RATE,
+	TCA_FCNT,
+	TCA_STATS2,
+	TCA_STAB,
+	__TCA_MAX
+};
+
+#define TCA_MAX (__TCA_MAX - 1)
+
+#define TCA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg))))
+#define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg))
+
+/********************************************************************
+ *		Neighbor Discovery userland options
+ ****/
+
+struct nduseroptmsg {
+	unsigned char	nduseropt_family;
+	unsigned char	nduseropt_pad1;
+	unsigned short	nduseropt_opts_len;	/* Total length of options */
+	int		nduseropt_ifindex;
+	__u8		nduseropt_icmp_type;
+	__u8		nduseropt_icmp_code;
+	unsigned short	nduseropt_pad2;
+	unsigned int	nduseropt_pad3;
+	/* Followed by one or more ND options */
+};
+
+enum {
+	NDUSEROPT_UNSPEC,
+	NDUSEROPT_SRCADDR,
+	__NDUSEROPT_MAX
+};
+
+#define NDUSEROPT_MAX	(__NDUSEROPT_MAX - 1)
+
+#ifndef __KERNEL__
+/* RTnetlink multicast groups - backwards compatibility for userspace */
+#define RTMGRP_LINK		1
+#define RTMGRP_NOTIFY		2
+#define RTMGRP_NEIGH		4
+#define RTMGRP_TC		8
+
+#define RTMGRP_IPV4_IFADDR	0x10
+#define RTMGRP_IPV4_MROUTE	0x20
+#define RTMGRP_IPV4_ROUTE	0x40
+#define RTMGRP_IPV4_RULE	0x80
+
+#define RTMGRP_IPV6_IFADDR	0x100
+#define RTMGRP_IPV6_MROUTE	0x200
+#define RTMGRP_IPV6_ROUTE	0x400
+#define RTMGRP_IPV6_IFINFO	0x800
+
+#define RTMGRP_DECnet_IFADDR    0x1000
+#define RTMGRP_DECnet_ROUTE     0x4000
+
+#define RTMGRP_IPV6_PREFIX	0x20000
+#endif
+
+/* RTnetlink multicast groups */
+enum rtnetlink_groups {
+	RTNLGRP_NONE,
+#define RTNLGRP_NONE		RTNLGRP_NONE
+	RTNLGRP_LINK,
+#define RTNLGRP_LINK		RTNLGRP_LINK
+	RTNLGRP_NOTIFY,
+#define RTNLGRP_NOTIFY		RTNLGRP_NOTIFY
+	RTNLGRP_NEIGH,
+#define RTNLGRP_NEIGH		RTNLGRP_NEIGH
+	RTNLGRP_TC,
+#define RTNLGRP_TC		RTNLGRP_TC
+	RTNLGRP_IPV4_IFADDR,
+#define RTNLGRP_IPV4_IFADDR	RTNLGRP_IPV4_IFADDR
+	RTNLGRP_IPV4_MROUTE,
+#define	RTNLGRP_IPV4_MROUTE	RTNLGRP_IPV4_MROUTE
+	RTNLGRP_IPV4_ROUTE,
+#define RTNLGRP_IPV4_ROUTE	RTNLGRP_IPV4_ROUTE
+	RTNLGRP_IPV4_RULE,
+#define RTNLGRP_IPV4_RULE	RTNLGRP_IPV4_RULE
+	RTNLGRP_IPV6_IFADDR,
+#define RTNLGRP_IPV6_IFADDR	RTNLGRP_IPV6_IFADDR
+	RTNLGRP_IPV6_MROUTE,
+#define RTNLGRP_IPV6_MROUTE	RTNLGRP_IPV6_MROUTE
+	RTNLGRP_IPV6_ROUTE,
+#define RTNLGRP_IPV6_ROUTE	RTNLGRP_IPV6_ROUTE
+	RTNLGRP_IPV6_IFINFO,
+#define RTNLGRP_IPV6_IFINFO	RTNLGRP_IPV6_IFINFO
+	RTNLGRP_DECnet_IFADDR,
+#define RTNLGRP_DECnet_IFADDR	RTNLGRP_DECnet_IFADDR
+	RTNLGRP_NOP2,
+	RTNLGRP_DECnet_ROUTE,
+#define RTNLGRP_DECnet_ROUTE	RTNLGRP_DECnet_ROUTE
+	RTNLGRP_DECnet_RULE,
+#define RTNLGRP_DECnet_RULE	RTNLGRP_DECnet_RULE
+	RTNLGRP_NOP4,
+	RTNLGRP_IPV6_PREFIX,
+#define RTNLGRP_IPV6_PREFIX	RTNLGRP_IPV6_PREFIX
+	RTNLGRP_IPV6_RULE,
+#define RTNLGRP_IPV6_RULE	RTNLGRP_IPV6_RULE
+	RTNLGRP_ND_USEROPT,
+#define RTNLGRP_ND_USEROPT	RTNLGRP_ND_USEROPT
+	RTNLGRP_PHONET_IFADDR,
+#define RTNLGRP_PHONET_IFADDR	RTNLGRP_PHONET_IFADDR
+	RTNLGRP_PHONET_ROUTE,
+#define RTNLGRP_PHONET_ROUTE	RTNLGRP_PHONET_ROUTE
+	RTNLGRP_DCB,
+#define RTNLGRP_DCB		RTNLGRP_DCB
+	__RTNLGRP_MAX
+};
+#define RTNLGRP_MAX	(__RTNLGRP_MAX - 1)
+
+/* TC action piece */
+struct tcamsg {
+	unsigned char	tca_family;
+	unsigned char	tca__pad1;
+	unsigned short	tca__pad2;
+};
+#define TA_RTA(r)  ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcamsg))))
+#define TA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcamsg))
+#define TCA_ACT_TAB 1 /* attr type must be >=1 */	
+#define TCAA_MAX 1
+
+/* New extended info filters for IFLA_EXT_MASK */
+#define RTEXT_FILTER_VF		(1 << 0)
+
+/* End of information exported to user level */
+
+
+
+#endif /* _UAPI__LINUX_RTNETLINK_H */
diff --git a/include/uapi/linux/scc.h b/include/uapi/linux/scc.h
new file mode 100644
index 0000000..72b6b81
--- /dev/null
+++ b/include/uapi/linux/scc.h
@@ -0,0 +1,172 @@
+/* $Id: scc.h,v 1.29 1997/04/02 14:56:45 jreuter Exp jreuter $ */
+
+#ifndef _UAPI_SCC_H
+#define _UAPI_SCC_H
+
+
+/* selection of hardware types */
+
+#define PA0HZP		0x00	/* hardware type for PA0HZP SCC card and compatible */
+#define EAGLE		0x01    /* hardware type for EAGLE card */
+#define PC100		0x02	/* hardware type for PC100 card */
+#define PRIMUS		0x04	/* hardware type for PRIMUS-PC (DG9BL) card */
+#define DRSI		0x08	/* hardware type for DRSI PC*Packet card */
+#define BAYCOM		0x10	/* hardware type for BayCom (U)SCC */
+
+/* DEV ioctl() commands */
+
+enum SCC_ioctl_cmds {
+	SIOCSCCRESERVED = SIOCDEVPRIVATE,
+	SIOCSCCCFG,
+	SIOCSCCINI,
+	SIOCSCCCHANINI,
+	SIOCSCCSMEM,
+	SIOCSCCGKISS,
+	SIOCSCCSKISS,
+	SIOCSCCGSTAT,
+	SIOCSCCCAL
+};
+
+/* Device parameter control (from WAMPES) */
+
+enum L1_params {
+	PARAM_DATA,
+	PARAM_TXDELAY,
+	PARAM_PERSIST,
+	PARAM_SLOTTIME,
+	PARAM_TXTAIL,
+	PARAM_FULLDUP,
+	PARAM_SOFTDCD,		/* was: PARAM_HW */
+	PARAM_MUTE,		/* ??? */
+	PARAM_DTR,
+	PARAM_RTS,
+	PARAM_SPEED,
+	PARAM_ENDDELAY,		/* ??? */
+	PARAM_GROUP,
+	PARAM_IDLE,
+	PARAM_MIN,
+	PARAM_MAXKEY,
+	PARAM_WAIT,
+	PARAM_MAXDEFER,
+	PARAM_TX,
+	PARAM_HWEVENT = 31,
+	PARAM_RETURN = 255	/* reset kiss mode */
+};
+
+/* fulldup parameter */
+
+enum FULLDUP_modes {
+	KISS_DUPLEX_HALF,	/* normal CSMA operation */
+	KISS_DUPLEX_FULL,	/* fullduplex, key down trx after transmission */
+	KISS_DUPLEX_LINK,	/* fullduplex, key down trx after 'idletime' sec */
+	KISS_DUPLEX_OPTIMA	/* fullduplex, let the protocol layer control the hw */
+};
+
+/* misc. parameters */
+
+#define TIMER_OFF	65535U	/* to switch off timers */
+#define NO_SUCH_PARAM	65534U	/* param not implemented */
+
+/* HWEVENT parameter */
+
+enum HWEVENT_opts {
+	HWEV_DCD_ON,
+	HWEV_DCD_OFF,
+	HWEV_ALL_SENT
+};
+
+/* channel grouping */
+
+#define RXGROUP		0100	/* if set, only tx when all channels clear */
+#define TXGROUP		0200	/* if set, don't transmit simultaneously */
+
+/* Tx/Rx clock sources */
+
+enum CLOCK_sources {
+	CLK_DPLL,	/* normal halfduplex operation */
+	CLK_EXTERNAL,	/* external clocking (G3RUH/DF9IC modems) */
+	CLK_DIVIDER,	/* Rx = DPLL, Tx = divider (fullduplex with */
+			/* modems without clock regeneration */
+	CLK_BRG		/* experimental fullduplex mode with DPLL/BRG for */
+			/* MODEMs without clock recovery */
+};
+
+/* Tx state */
+
+enum TX_state {
+	TXS_IDLE,	/* Transmitter off, no data pending */
+	TXS_BUSY,	/* waiting for permission to send / tailtime */
+	TXS_ACTIVE,	/* Transmitter on, sending data */
+	TXS_NEWFRAME,	/* reset CRC and send (next) frame */
+	TXS_IDLE2,	/* Transmitter on, no data pending */
+	TXS_WAIT,	/* Waiting for Mintime to expire */
+	TXS_TIMEOUT	/* We had a transmission timeout */
+};
+
+typedef unsigned long io_port;	/* type definition for an 'io port address' */
+
+/* SCC statistical information */
+
+struct scc_stat {
+        long rxints;            /* Receiver interrupts */
+        long txints;            /* Transmitter interrupts */
+        long exints;            /* External/status interrupts */
+        long spints;            /* Special receiver interrupts */
+
+        long txframes;          /* Packets sent */
+        long rxframes;          /* Number of Frames Actually Received */
+        long rxerrs;            /* CRC Errors */
+        long txerrs;		/* KISS errors */
+        
+	unsigned int nospace;	/* "Out of buffers" */
+	unsigned int rx_over;	/* Receiver Overruns */
+	unsigned int tx_under;	/* Transmitter Underruns */
+
+	unsigned int tx_state;	/* Transmitter state */
+	int tx_queued;		/* tx frames enqueued */
+
+	unsigned int maxqueue;	/* allocated tx_buffers */
+	unsigned int bufsize;	/* used buffersize */
+};
+
+struct scc_modem {
+	long speed;		/* Line speed, bps */
+	char clocksrc;		/* 0 = DPLL, 1 = external, 2 = divider */
+	char nrz;		/* NRZ instead of NRZI */	
+};
+
+struct scc_kiss_cmd {
+	int  	 command;	/* one of the KISS-Commands defined above */
+	unsigned param;		/* KISS-Param */
+};
+
+struct scc_hw_config {
+	io_port data_a;		/* data port channel A */
+	io_port ctrl_a;		/* control port channel A */
+	io_port data_b;		/* data port channel B */
+	io_port ctrl_b;		/* control port channel B */
+	io_port vector_latch;	/* INTACK-Latch (#) */
+	io_port	special;	/* special function port */
+
+	int	irq;		/* irq */
+	long	clock;		/* clock */
+	char	option;		/* command for function port */
+
+	char brand;		/* hardware type */
+	char escc;		/* use ext. features of a 8580/85180/85280 */
+};
+
+/* (#) only one INTACK latch allowed. */
+
+
+struct scc_mem_config {
+	unsigned int dummy;
+	unsigned int bufsize;
+};
+
+struct scc_calibrate {
+	unsigned int time;
+	unsigned char pattern;
+};
+
+#endif /* _UAPI_SCC_H */
diff --git a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h
new file mode 100644
index 0000000..5a0f945
--- /dev/null
+++ b/include/uapi/linux/sched.h
@@ -0,0 +1,46 @@
+#ifndef _UAPI_LINUX_SCHED_H
+#define _UAPI_LINUX_SCHED_H
+
+/*
+ * cloning flags:
+ */
+#define CSIGNAL		0x000000ff	/* signal mask to be sent at exit */
+#define CLONE_VM	0x00000100	/* set if VM shared between processes */
+#define CLONE_FS	0x00000200	/* set if fs info shared between processes */
+#define CLONE_FILES	0x00000400	/* set if open files shared between processes */
+#define CLONE_SIGHAND	0x00000800	/* set if signal handlers and blocked signals shared */
+#define CLONE_PTRACE	0x00002000	/* set if we want to let tracing continue on the child too */
+#define CLONE_VFORK	0x00004000	/* set if the parent wants the child to wake it up on mm_release */
+#define CLONE_PARENT	0x00008000	/* set if we want to have the same parent as the cloner */
+#define CLONE_THREAD	0x00010000	/* Same thread group? */
+#define CLONE_NEWNS	0x00020000	/* New namespace group? */
+#define CLONE_SYSVSEM	0x00040000	/* share system V SEM_UNDO semantics */
+#define CLONE_SETTLS	0x00080000	/* create a new TLS for the child */
+#define CLONE_PARENT_SETTID	0x00100000	/* set the TID in the parent */
+#define CLONE_CHILD_CLEARTID	0x00200000	/* clear the TID in the child */
+#define CLONE_DETACHED		0x00400000	/* Unused, ignored */
+#define CLONE_UNTRACED		0x00800000	/* set if the tracing process can't force CLONE_PTRACE on this clone */
+#define CLONE_CHILD_SETTID	0x01000000	/* set the TID in the child */
+/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state)
+   and is now available for re-use. */
+#define CLONE_NEWUTS		0x04000000	/* New utsname group? */
+#define CLONE_NEWIPC		0x08000000	/* New ipcs */
+#define CLONE_NEWUSER		0x10000000	/* New user namespace */
+#define CLONE_NEWPID		0x20000000	/* New pid namespace */
+#define CLONE_NEWNET		0x40000000	/* New network namespace */
+#define CLONE_IO		0x80000000	/* Clone io context */
+
+/*
+ * Scheduling policies
+ */
+#define SCHED_NORMAL		0
+#define SCHED_FIFO		1
+#define SCHED_RR		2
+#define SCHED_BATCH		3
+/* SCHED_ISO: reserved but not implemented yet */
+#define SCHED_IDLE		5
+/* Can be ORed in to make sure the process is reverted back to SCHED_NORMAL on fork */
+#define SCHED_RESET_ON_FORK     0x40000000
+
+
+#endif /* _UAPI_LINUX_SCHED_H */
diff --git a/include/uapi/linux/screen_info.h b/include/uapi/linux/screen_info.h
new file mode 100644
index 0000000..7530e74
--- /dev/null
+++ b/include/uapi/linux/screen_info.h
@@ -0,0 +1,74 @@
+#ifndef _UAPI_SCREEN_INFO_H
+#define _UAPI_SCREEN_INFO_H
+
+#include <linux/types.h>
+
+/*
+ * These are set up by the setup-routine at boot-time:
+ */
+
+struct screen_info {
+	__u8  orig_x;		/* 0x00 */
+	__u8  orig_y;		/* 0x01 */
+	__u16 ext_mem_k;	/* 0x02 */
+	__u16 orig_video_page;	/* 0x04 */
+	__u8  orig_video_mode;	/* 0x06 */
+	__u8  orig_video_cols;	/* 0x07 */
+	__u8  flags;		/* 0x08 */
+	__u8  unused2;		/* 0x09 */
+	__u16 orig_video_ega_bx;/* 0x0a */
+	__u16 unused3;		/* 0x0c */
+	__u8  orig_video_lines;	/* 0x0e */
+	__u8  orig_video_isVGA;	/* 0x0f */
+	__u16 orig_video_points;/* 0x10 */
+
+	/* VESA graphic mode -- linear frame buffer */
+	__u16 lfb_width;	/* 0x12 */
+	__u16 lfb_height;	/* 0x14 */
+	__u16 lfb_depth;	/* 0x16 */
+	__u32 lfb_base;		/* 0x18 */
+	__u32 lfb_size;		/* 0x1c */
+	__u16 cl_magic, cl_offset; /* 0x20 */
+	__u16 lfb_linelength;	/* 0x24 */
+	__u8  red_size;		/* 0x26 */
+	__u8  red_pos;		/* 0x27 */
+	__u8  green_size;	/* 0x28 */
+	__u8  green_pos;	/* 0x29 */
+	__u8  blue_size;	/* 0x2a */
+	__u8  blue_pos;		/* 0x2b */
+	__u8  rsvd_size;	/* 0x2c */
+	__u8  rsvd_pos;		/* 0x2d */
+	__u16 vesapm_seg;	/* 0x2e */
+	__u16 vesapm_off;	/* 0x30 */
+	__u16 pages;		/* 0x32 */
+	__u16 vesa_attributes;	/* 0x34 */
+	__u32 capabilities;     /* 0x36 */
+	__u8  _reserved[6];	/* 0x3a */
+} __attribute__((packed));
+
+#define VIDEO_TYPE_MDA		0x10	/* Monochrome Text Display	*/
+#define VIDEO_TYPE_CGA		0x11	/* CGA Display 			*/
+#define VIDEO_TYPE_EGAM		0x20	/* EGA/VGA in Monochrome Mode	*/
+#define VIDEO_TYPE_EGAC		0x21	/* EGA in Color Mode		*/
+#define VIDEO_TYPE_VGAC		0x22	/* VGA+ in Color Mode		*/
+#define VIDEO_TYPE_VLFB		0x23	/* VESA VGA in graphic mode	*/
+
+#define VIDEO_TYPE_PICA_S3	0x30	/* ACER PICA-61 local S3 video	*/
+#define VIDEO_TYPE_MIPS_G364	0x31    /* MIPS Magnum 4000 G364 video  */
+#define VIDEO_TYPE_SGI          0x33    /* Various SGI graphics hardware */
+
+#define VIDEO_TYPE_TGAC		0x40	/* DEC TGA */
+
+#define VIDEO_TYPE_SUN          0x50    /* Sun frame buffer. */
+#define VIDEO_TYPE_SUNPCI       0x51    /* Sun PCI based frame buffer. */
+
+#define VIDEO_TYPE_PMAC		0x60	/* PowerMacintosh frame buffer. */
+
+#define VIDEO_TYPE_EFI		0x70	/* EFI graphic mode		*/
+
+#define VIDEO_FLAGS_NOCURSOR	(1 << 0) /* The video mode has no cursor set */
+
+#define VIDEO_CAPABILITY_SKIP_QUIRKS	(1 << 0)
+
+
+#endif /* _UAPI_SCREEN_INFO_H */
diff --git a/include/uapi/linux/sdla.h b/include/uapi/linux/sdla.h
new file mode 100644
index 0000000..95eaff9
--- /dev/null
+++ b/include/uapi/linux/sdla.h
@@ -0,0 +1,116 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Global definitions for the Frame relay interface.
+ *
+ * Version:	@(#)if_ifrad.h	0.20	13 Apr 96
+ *
+ * Author:	Mike McLagan <mike.mclagan@linux.org>
+ *
+ * Changes:
+ *		0.15	Mike McLagan	Structure packing
+ *
+ *		0.20	Mike McLagan	New flags for S508 buffer handling
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPISDLA_H
+#define _UAPISDLA_H
+
+/* adapter type */
+#define SDLA_TYPES
+#define SDLA_S502A			5020
+#define SDLA_S502E			5021
+#define SDLA_S503			5030
+#define SDLA_S507			5070
+#define SDLA_S508			5080
+#define SDLA_S509			5090
+#define SDLA_UNKNOWN			-1
+
+/* port selection flags for the S508 */
+#define SDLA_S508_PORT_V35		0x00
+#define SDLA_S508_PORT_RS232		0x02
+
+/* Z80 CPU speeds */
+#define SDLA_CPU_3M			0x00
+#define SDLA_CPU_5M			0x01
+#define SDLA_CPU_7M			0x02
+#define SDLA_CPU_8M			0x03
+#define SDLA_CPU_10M			0x04
+#define SDLA_CPU_16M			0x05
+#define SDLA_CPU_12M			0x06
+
+/* some private IOCTLs */
+#define SDLA_IDENTIFY			(FRAD_LAST_IOCTL + 1)
+#define SDLA_CPUSPEED			(FRAD_LAST_IOCTL + 2)
+#define SDLA_PROTOCOL			(FRAD_LAST_IOCTL + 3)
+
+#define SDLA_CLEARMEM			(FRAD_LAST_IOCTL + 4)
+#define SDLA_WRITEMEM			(FRAD_LAST_IOCTL + 5)
+#define SDLA_READMEM			(FRAD_LAST_IOCTL + 6)
+
+struct sdla_mem {
+   int  addr;
+   int  len;
+   void __user *data;
+};
+
+#define SDLA_START			(FRAD_LAST_IOCTL + 7)
+#define SDLA_STOP			(FRAD_LAST_IOCTL + 8)
+
+/* some offsets in the Z80's memory space */
+#define SDLA_NMIADDR			0x0000
+#define SDLA_CONF_ADDR			0x0010
+#define SDLA_S502A_NMIADDR		0x0066
+#define SDLA_CODE_BASEADDR		0x0100
+#define SDLA_WINDOW_SIZE		0x2000
+#define SDLA_ADDR_MASK			0x1FFF
+
+/* largest handleable block of data */
+#define SDLA_MAX_DATA			4080
+#define SDLA_MAX_MTU			4072	/* MAX_DATA - sizeof(fradhdr) */
+#define SDLA_MAX_DLCI			24
+
+/* this should be the same as frad_conf */
+struct sdla_conf {
+   short station;
+   short config;
+   short kbaud;
+   short clocking;
+   short max_frm;
+   short T391;
+   short T392;
+   short N391;
+   short N392;
+   short N393;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd;
+};
+
+/* this should be the same as dlci_conf */
+struct sdla_dlci_conf {
+   short config;
+   short CIR_fwd;
+   short Bc_fwd;
+   short Be_fwd;
+   short CIR_bwd;
+   short Bc_bwd;
+   short Be_bwd; 
+   short Tc_fwd;
+   short Tc_bwd;
+   short Tf_max;
+   short Tb_max;
+};
+
+
+#endif /* _UAPISDLA_H */
diff --git a/include/uapi/linux/seccomp.h b/include/uapi/linux/seccomp.h
new file mode 100644
index 0000000..ac2dc9f
--- /dev/null
+++ b/include/uapi/linux/seccomp.h
@@ -0,0 +1,47 @@
+#ifndef _UAPI_LINUX_SECCOMP_H
+#define _UAPI_LINUX_SECCOMP_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */
+#define SECCOMP_MODE_DISABLED	0 /* seccomp is not in use. */
+#define SECCOMP_MODE_STRICT	1 /* uses hard-coded filter. */
+#define SECCOMP_MODE_FILTER	2 /* uses user-supplied filter. */
+
+/*
+ * All BPF programs must return a 32-bit value.
+ * The bottom 16-bits are for optional return data.
+ * The upper 16-bits are ordered from least permissive values to most.
+ *
+ * The ordering ensures that a min_t() over composed return values always
+ * selects the least permissive choice.
+ */
+#define SECCOMP_RET_KILL	0x00000000U /* kill the task immediately */
+#define SECCOMP_RET_TRAP	0x00030000U /* disallow and force a SIGSYS */
+#define SECCOMP_RET_ERRNO	0x00050000U /* returns an errno */
+#define SECCOMP_RET_TRACE	0x7ff00000U /* pass to a tracer or disallow */
+#define SECCOMP_RET_ALLOW	0x7fff0000U /* allow */
+
+/* Masks for the return value sections. */
+#define SECCOMP_RET_ACTION	0x7fff0000U
+#define SECCOMP_RET_DATA	0x0000ffffU
+
+/**
+ * struct seccomp_data - the format the BPF program executes over.
+ * @nr: the system call number
+ * @arch: indicates system call convention as an AUDIT_ARCH_* value
+ *        as defined in <linux/audit.h>.
+ * @instruction_pointer: at the time of the system call.
+ * @args: up to 6 system call arguments always stored as 64-bit values
+ *        regardless of the architecture.
+ */
+struct seccomp_data {
+	int nr;
+	__u32 arch;
+	__u64 instruction_pointer;
+	__u64 args[6];
+};
+
+#endif /* _UAPI_LINUX_SECCOMP_H */
diff --git a/include/uapi/linux/securebits.h b/include/uapi/linux/securebits.h
new file mode 100644
index 0000000..985aac9
--- /dev/null
+++ b/include/uapi/linux/securebits.h
@@ -0,0 +1,51 @@
+#ifndef _UAPI_LINUX_SECUREBITS_H
+#define _UAPI_LINUX_SECUREBITS_H
+
+/* Each securesetting is implemented using two bits. One bit specifies
+   whether the setting is on or off. The other bit specify whether the
+   setting is locked or not. A setting which is locked cannot be
+   changed from user-level. */
+#define issecure_mask(X)	(1 << (X))
+
+#define SECUREBITS_DEFAULT 0x00000000
+
+/* When set UID 0 has no special privileges. When unset, we support
+   inheritance of root-permissions and suid-root executable under
+   compatibility mode. We raise the effective and inheritable bitmasks
+   *of the executable file* if the effective uid of the new process is
+   0. If the real uid is 0, we raise the effective (legacy) bit of the
+   executable file. */
+#define SECURE_NOROOT			0
+#define SECURE_NOROOT_LOCKED		1  /* make bit-0 immutable */
+
+#define SECBIT_NOROOT		(issecure_mask(SECURE_NOROOT))
+#define SECBIT_NOROOT_LOCKED	(issecure_mask(SECURE_NOROOT_LOCKED))
+
+/* When set, setuid to/from uid 0 does not trigger capability-"fixup".
+   When unset, to provide compatiblility with old programs relying on
+   set*uid to gain/lose privilege, transitions to/from uid 0 cause
+   capabilities to be gained/lost. */
+#define SECURE_NO_SETUID_FIXUP		2
+#define SECURE_NO_SETUID_FIXUP_LOCKED	3  /* make bit-2 immutable */
+
+#define SECBIT_NO_SETUID_FIXUP	(issecure_mask(SECURE_NO_SETUID_FIXUP))
+#define SECBIT_NO_SETUID_FIXUP_LOCKED \
+			(issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
+
+/* When set, a process can retain its capabilities even after
+   transitioning to a non-root user (the set-uid fixup suppressed by
+   bit 2). Bit-4 is cleared when a process calls exec(); setting both
+   bit 4 and 5 will create a barrier through exec that no exec()'d
+   child can use this feature again. */
+#define SECURE_KEEP_CAPS		4
+#define SECURE_KEEP_CAPS_LOCKED		5  /* make bit-4 immutable */
+
+#define SECBIT_KEEP_CAPS	(issecure_mask(SECURE_KEEP_CAPS))
+#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))
+
+#define SECURE_ALL_BITS		(issecure_mask(SECURE_NOROOT) | \
+				 issecure_mask(SECURE_NO_SETUID_FIXUP) | \
+				 issecure_mask(SECURE_KEEP_CAPS))
+#define SECURE_ALL_LOCKS	(SECURE_ALL_BITS << 1)
+
+#endif /* _UAPI_LINUX_SECUREBITS_H */
diff --git a/include/linux/selinux_netlink.h b/include/uapi/linux/selinux_netlink.h
similarity index 100%
rename from include/linux/selinux_netlink.h
rename to include/uapi/linux/selinux_netlink.h
diff --git a/include/uapi/linux/sem.h b/include/uapi/linux/sem.h
new file mode 100644
index 0000000..541fce0
--- /dev/null
+++ b/include/uapi/linux/sem.h
@@ -0,0 +1,80 @@
+#ifndef _UAPI_LINUX_SEM_H
+#define _UAPI_LINUX_SEM_H
+
+#include <linux/ipc.h>
+
+/* semop flags */
+#define SEM_UNDO        0x1000  /* undo the operation on exit */
+
+/* semctl Command Definitions. */
+#define GETPID  11       /* get sempid */
+#define GETVAL  12       /* get semval */
+#define GETALL  13       /* get all semval's */
+#define GETNCNT 14       /* get semncnt */
+#define GETZCNT 15       /* get semzcnt */
+#define SETVAL  16       /* set semval */
+#define SETALL  17       /* set all semval's */
+
+/* ipcs ctl cmds */
+#define SEM_STAT 18
+#define SEM_INFO 19
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct semid_ds {
+	struct ipc_perm	sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	struct sem	*sem_base;		/* ptr to first semaphore in array */
+	struct sem_queue *sem_pending;		/* pending operations to be processed */
+	struct sem_queue **sem_pending_last;	/* last pending operation */
+	struct sem_undo	*undo;			/* undo requests on this array */
+	unsigned short	sem_nsems;		/* no. of semaphores in array */
+};
+
+/* Include the definition of semid64_ds */
+#include <asm/sembuf.h>
+
+/* semop system calls takes an array of these. */
+struct sembuf {
+	unsigned short  sem_num;	/* semaphore index in array */
+	short		sem_op;		/* semaphore operation */
+	short		sem_flg;	/* operation flags */
+};
+
+/* arg for semctl system calls. */
+union semun {
+	int val;			/* value for SETVAL */
+	struct semid_ds __user *buf;	/* buffer for IPC_STAT & IPC_SET */
+	unsigned short __user *array;	/* array for GETALL & SETALL */
+	struct seminfo __user *__buf;	/* buffer for IPC_INFO */
+	void __user *__pad;
+};
+
+struct  seminfo {
+	int semmap;
+	int semmni;
+	int semmns;
+	int semmnu;
+	int semmsl;
+	int semopm;
+	int semume;
+	int semusz;
+	int semvmx;
+	int semaem;
+};
+
+#define SEMMNI  128             /* <= IPCMNI  max # of semaphore identifiers */
+#define SEMMSL  250             /* <= 8 000 max num of semaphores per id */
+#define SEMMNS  (SEMMNI*SEMMSL) /* <= INT_MAX max # of semaphores in system */
+#define SEMOPM  32	        /* <= 1 000 max num of ops per semop call */
+#define SEMVMX  32767           /* <= 32767 semaphore maximum value */
+#define SEMAEM  SEMVMX          /* adjust on exit max value */
+
+/* unused */
+#define SEMUME  SEMOPM          /* max num of undo entries per process */
+#define SEMMNU  SEMMNS          /* num of undo structures system wide */
+#define SEMMAP  SEMMNS          /* # of entries in semaphore map */
+#define SEMUSZ  20		/* sizeof struct sem_undo */
+
+
+#endif /* _UAPI_LINUX_SEM_H */
diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h
new file mode 100644
index 0000000..5e0d0ed
--- /dev/null
+++ b/include/uapi/linux/serial.h
@@ -0,0 +1,126 @@
+/*
+ * include/linux/serial.h
+ *
+ * Copyright (C) 1992 by Theodore Ts'o.
+ * 
+ * Redistribution of this file is permitted under the terms of the GNU 
+ * Public License (GPL)
+ */
+
+#ifndef _UAPI_LINUX_SERIAL_H
+#define _UAPI_LINUX_SERIAL_H
+
+#include <linux/types.h>
+
+#include <linux/tty_flags.h>
+
+
+struct serial_struct {
+	int	type;
+	int	line;
+	unsigned int	port;
+	int	irq;
+	int	flags;
+	int	xmit_fifo_size;
+	int	custom_divisor;
+	int	baud_base;
+	unsigned short	close_delay;
+	char	io_type;
+	char	reserved_char[1];
+	int	hub6;
+	unsigned short	closing_wait; /* time to wait before closing */
+	unsigned short	closing_wait2; /* no longer used... */
+	unsigned char	*iomem_base;
+	unsigned short	iomem_reg_shift;
+	unsigned int	port_high;
+	unsigned long	iomap_base;	/* cookie passed into ioremap */
+};
+
+/*
+ * For the close wait times, 0 means wait forever for serial port to
+ * flush its output.  65535 means don't wait at all.
+ */
+#define ASYNC_CLOSING_WAIT_INF	0
+#define ASYNC_CLOSING_WAIT_NONE	65535
+
+/*
+ * These are the supported serial types.
+ */
+#define PORT_UNKNOWN	0
+#define PORT_8250	1
+#define PORT_16450	2
+#define PORT_16550	3
+#define PORT_16550A	4
+#define PORT_CIRRUS     5	/* usurped by cyclades.c */
+#define PORT_16650	6
+#define PORT_16650V2	7
+#define PORT_16750	8
+#define PORT_STARTECH	9	/* usurped by cyclades.c */
+#define PORT_16C950	10	/* Oxford Semiconductor */
+#define PORT_16654	11
+#define PORT_16850	12
+#define PORT_RSA	13	/* RSA-DV II/S card */
+#define PORT_MAX	13
+
+#define SERIAL_IO_PORT	0
+#define SERIAL_IO_HUB6	1
+#define SERIAL_IO_MEM	2
+
+#define UART_CLEAR_FIFO		0x01
+#define UART_USE_FIFO		0x02
+#define UART_STARTECH		0x04
+#define UART_NATSEMI		0x08
+
+
+/*
+ * Multiport serial configuration structure --- external structure
+ */
+struct serial_multiport_struct {
+	int		irq;
+	int		port1;
+	unsigned char	mask1, match1;
+	int		port2;
+	unsigned char	mask2, match2;
+	int		port3;
+	unsigned char	mask3, match3;
+	int		port4;
+	unsigned char	mask4, match4;
+	int		port_monitor;
+	int	reserved[32];
+};
+
+/*
+ * Serial input interrupt line counters -- external structure
+ * Four lines can interrupt: CTS, DSR, RI, DCD
+ */
+struct serial_icounter_struct {
+	int cts, dsr, rng, dcd;
+	int rx, tx;
+	int frame, overrun, parity, brk;
+	int buf_overrun;
+	int reserved[9];
+};
+
+/*
+ * Serial interface for controlling RS485 settings on chips with suitable
+ * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
+ * platform. The set function returns the new state, with any unsupported bits
+ * reverted appropriately.
+ */
+
+struct serial_rs485 {
+	__u32	flags;			/* RS485 feature flags */
+#define SER_RS485_ENABLED		(1 << 0)	/* If enabled */
+#define SER_RS485_RTS_ON_SEND		(1 << 1)	/* Logical level for
+							   RTS pin when
+							   sending */
+#define SER_RS485_RTS_AFTER_SEND	(1 << 2)	/* Logical level for
+							   RTS pin after sent*/
+#define SER_RS485_RX_DURING_TX		(1 << 4)
+	__u32	delay_rts_before_send;	/* Delay before send (milliseconds) */
+	__u32	delay_rts_after_send;	/* Delay after send (milliseconds) */
+	__u32	padding[5];		/* Memory is cheap, new structs
+					   are a royal PITA .. */
+};
+
+#endif /* _UAPI_LINUX_SERIAL_H */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
new file mode 100644
index 0000000..7e1ab20
--- /dev/null
+++ b/include/uapi/linux/serial_core.h
@@ -0,0 +1,219 @@
+/*
+ *  linux/drivers/char/serial_core.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _UAPILINUX_SERIAL_CORE_H
+#define _UAPILINUX_SERIAL_CORE_H
+
+#include <linux/serial.h>
+
+/*
+ * The type definitions.  These are from Ted Ts'o's serial.h
+ */
+#define PORT_UNKNOWN	0
+#define PORT_8250	1
+#define PORT_16450	2
+#define PORT_16550	3
+#define PORT_16550A	4
+#define PORT_CIRRUS	5
+#define PORT_16650	6
+#define PORT_16650V2	7
+#define PORT_16750	8
+#define PORT_STARTECH	9
+#define PORT_16C950	10
+#define PORT_16654	11
+#define PORT_16850	12
+#define PORT_RSA	13
+#define PORT_NS16550A	14
+#define PORT_XSCALE	15
+#define PORT_RM9000	16	/* PMC-Sierra RM9xxx internal UART */
+#define PORT_OCTEON	17	/* Cavium OCTEON internal UART */
+#define PORT_AR7	18	/* Texas Instruments AR7 internal UART */
+#define PORT_U6_16550A	19	/* ST-Ericsson U6xxx internal UART */
+#define PORT_TEGRA	20	/* NVIDIA Tegra internal UART */
+#define PORT_XR17D15X	21	/* Exar XR17D15x UART */
+#define PORT_LPC3220	22	/* NXP LPC32xx SoC "Standard" UART */
+#define PORT_8250_CIR	23	/* CIR infrared port, has its own driver */
+#define PORT_MAX_8250	23	/* max port ID */
+
+/*
+ * ARM specific type numbers.  These are not currently guaranteed
+ * to be implemented, and will change in the future.  These are
+ * separate so any additions to the old serial.c that occur before
+ * we are merged can be easily merged here.
+ */
+#define PORT_PXA	31
+#define PORT_AMBA	32
+#define PORT_CLPS711X	33
+#define PORT_SA1100	34
+#define PORT_UART00	35
+#define PORT_21285	37
+
+/* Sparc type numbers.  */
+#define PORT_SUNZILOG	38
+#define PORT_SUNSAB	39
+
+/* DEC */
+#define PORT_DZ		46
+#define PORT_ZS		47
+
+/* Parisc type numbers. */
+#define PORT_MUX	48
+
+/* Atmel AT91 / AT32 SoC */
+#define PORT_ATMEL	49
+
+/* Macintosh Zilog type numbers */
+#define PORT_MAC_ZILOG	50	/* m68k : not yet implemented */
+#define PORT_PMAC_ZILOG	51
+
+/* SH-SCI */
+#define PORT_SCI	52
+#define PORT_SCIF	53
+#define PORT_IRDA	54
+
+/* Samsung S3C2410 SoC and derivatives thereof */
+#define PORT_S3C2410    55
+
+/* SGI IP22 aka Indy / Challenge S / Indigo 2 */
+#define PORT_IP22ZILOG	56
+
+/* Sharp LH7a40x -- an ARM9 SoC series */
+#define PORT_LH7A40X	57
+
+/* PPC CPM type number */
+#define PORT_CPM        58
+
+/* MPC52xx (and MPC512x) type numbers */
+#define PORT_MPC52xx	59
+
+/* IBM icom */
+#define PORT_ICOM	60
+
+/* Samsung S3C2440 SoC */
+#define PORT_S3C2440	61
+
+/* Motorola i.MX SoC */
+#define PORT_IMX	62
+
+/* Marvell MPSC */
+#define PORT_MPSC	63
+
+/* TXX9 type number */
+#define PORT_TXX9	64
+
+/* NEC VR4100 series SIU/DSIU */
+#define PORT_VR41XX_SIU		65
+#define PORT_VR41XX_DSIU	66
+
+/* Samsung S3C2400 SoC */
+#define PORT_S3C2400	67
+
+/* M32R SIO */
+#define PORT_M32R_SIO	68
+
+/*Digi jsm */
+#define PORT_JSM        69
+
+#define PORT_PNX8XXX	70
+
+/* Hilscher netx */
+#define PORT_NETX	71
+
+/* SUN4V Hypervisor Console */
+#define PORT_SUNHV	72
+
+#define PORT_S3C2412	73
+
+/* Xilinx uartlite */
+#define PORT_UARTLITE	74
+
+/* Blackfin bf5xx */
+#define PORT_BFIN	75
+
+/* Micrel KS8695 */
+#define PORT_KS8695	76
+
+/* Broadcom SB1250, etc. SOC */
+#define PORT_SB1250_DUART	77
+
+/* Freescale ColdFire */
+#define PORT_MCF	78
+
+/* Blackfin SPORT */
+#define PORT_BFIN_SPORT		79
+
+/* MN10300 on-chip UART numbers */
+#define PORT_MN10300		80
+#define PORT_MN10300_CTS	81
+
+#define PORT_SC26XX	82
+
+/* SH-SCI */
+#define PORT_SCIFA	83
+
+#define PORT_S3C6400	84
+
+/* NWPSERIAL */
+#define PORT_NWPSERIAL	85
+
+/* MAX3100 */
+#define PORT_MAX3100    86
+
+/* Timberdale UART */
+#define PORT_TIMBUART	87
+
+/* Qualcomm MSM SoCs */
+#define PORT_MSM	88
+
+/* BCM63xx family SoCs */
+#define PORT_BCM63XX	89
+
+/* Aeroflex Gaisler GRLIB APBUART */
+#define PORT_APBUART    90
+
+/* Altera UARTs */
+#define PORT_ALTERA_JTAGUART	91
+#define PORT_ALTERA_UART	92
+
+/* SH-SCI */
+#define PORT_SCIFB	93
+
+/* MAX310X */
+#define PORT_MAX310X	94
+
+/* High Speed UART for Medfield */
+#define PORT_MFD	95
+
+/* TI OMAP-UART */
+#define PORT_OMAP	96
+
+/* VIA VT8500 SoC */
+#define PORT_VT8500	97
+
+/* Xilinx PSS UART */
+#define PORT_XUARTPS	98
+
+/* Atheros AR933X SoC */
+#define PORT_AR933X	99
+
+/* Energy Micro efm32 SoC */
+#define PORT_EFMUART   100
+
+
+#endif /* _UAPILINUX_SERIAL_CORE_H */
diff --git a/include/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
similarity index 100%
rename from include/linux/serial_reg.h
rename to include/uapi/linux/serial_reg.h
diff --git a/include/uapi/linux/serio.h b/include/uapi/linux/serio.h
new file mode 100644
index 0000000..9f53fa7
--- /dev/null
+++ b/include/uapi/linux/serio.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 1999-2002 Vojtech Pavlik
+*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _UAPI_SERIO_H
+#define _UAPI_SERIO_H
+
+
+#include <linux/ioctl.h>
+
+#define SPIOCSTYPE	_IOW('q', 0x01, unsigned long)
+
+
+/*
+ * bit masks for use in "interrupt" flags (3rd argument)
+ */
+#define SERIO_TIMEOUT	1
+#define SERIO_PARITY	2
+#define SERIO_FRAME	4
+
+/*
+ * Serio types
+ */
+#define SERIO_XT	0x00
+#define SERIO_8042	0x01
+#define SERIO_RS232	0x02
+#define SERIO_HIL_MLC	0x03
+#define SERIO_PS_PSTHRU	0x05
+#define SERIO_8042_XL	0x06
+
+/*
+ * Serio protocols
+ */
+#define SERIO_UNKNOWN	0x00
+#define SERIO_MSC	0x01
+#define SERIO_SUN	0x02
+#define SERIO_MS	0x03
+#define SERIO_MP	0x04
+#define SERIO_MZ	0x05
+#define SERIO_MZP	0x06
+#define SERIO_MZPP	0x07
+#define SERIO_VSXXXAA	0x08
+#define SERIO_SUNKBD	0x10
+#define SERIO_WARRIOR	0x18
+#define SERIO_SPACEORB	0x19
+#define SERIO_MAGELLAN	0x1a
+#define SERIO_SPACEBALL	0x1b
+#define SERIO_GUNZE	0x1c
+#define SERIO_IFORCE	0x1d
+#define SERIO_STINGER	0x1e
+#define SERIO_NEWTON	0x1f
+#define SERIO_STOWAWAY	0x20
+#define SERIO_H3600	0x21
+#define SERIO_PS2SER	0x22
+#define SERIO_TWIDKBD	0x23
+#define SERIO_TWIDJOY	0x24
+#define SERIO_HIL	0x25
+#define SERIO_SNES232	0x26
+#define SERIO_SEMTECH	0x27
+#define SERIO_LKKBD	0x28
+#define SERIO_ELO	0x29
+#define SERIO_MICROTOUCH	0x30
+#define SERIO_PENMOUNT	0x31
+#define SERIO_TOUCHRIGHT	0x32
+#define SERIO_TOUCHWIN	0x33
+#define SERIO_TAOSEVM	0x34
+#define SERIO_FUJITSU	0x35
+#define SERIO_ZHENHUA	0x36
+#define SERIO_INEXIO	0x37
+#define SERIO_TOUCHIT213	0x38
+#define SERIO_W8001	0x39
+#define SERIO_DYNAPRO	0x3a
+#define SERIO_HAMPSHIRE	0x3b
+#define SERIO_PS2MULT	0x3c
+#define SERIO_TSC40	0x3d
+
+#endif /* _UAPI_SERIO_H */
diff --git a/include/uapi/linux/shm.h b/include/uapi/linux/shm.h
new file mode 100644
index 0000000..ec36fa1
--- /dev/null
+++ b/include/uapi/linux/shm.h
@@ -0,0 +1,79 @@
+#ifndef _UAPI_LINUX_SHM_H_
+#define _UAPI_LINUX_SHM_H_
+
+#include <linux/ipc.h>
+#include <linux/errno.h>
+#ifndef __KERNEL__
+#include <unistd.h>
+#endif
+
+/*
+ * SHMMAX, SHMMNI and SHMALL are upper limits are defaults which can
+ * be increased by sysctl
+ */
+
+#define SHMMAX 0x2000000		 /* max shared seg size (bytes) */
+#define SHMMIN 1			 /* min shared seg size (bytes) */
+#define SHMMNI 4096			 /* max num of segs system wide */
+#ifndef __KERNEL__
+#define SHMALL (SHMMAX/getpagesize()*(SHMMNI/16))
+#endif
+#define SHMSEG SHMMNI			 /* max shared segs per process */
+
+
+/* Obsolete, used only for backwards compatibility and libc5 compiles */
+struct shmid_ds {
+	struct ipc_perm		shm_perm;	/* operation perms */
+	int			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_ipc_pid_t	shm_cpid;	/* pid of creator */
+	__kernel_ipc_pid_t	shm_lpid;	/* pid of last operator */
+	unsigned short		shm_nattch;	/* no. of current attaches */
+	unsigned short 		shm_unused;	/* compatibility */
+	void 			*shm_unused2;	/* ditto - used by DIPC */
+	void			*shm_unused3;	/* unused */
+};
+
+/* Include the definition of shmid64_ds and shminfo64 */
+#include <asm/shmbuf.h>
+
+/* permission flag for shmget */
+#define SHM_R		0400	/* or S_IRUGO from <linux/stat.h> */
+#define SHM_W		0200	/* or S_IWUGO from <linux/stat.h> */
+
+/* mode for attach */
+#define	SHM_RDONLY	010000	/* read-only access */
+#define	SHM_RND		020000	/* round attach address to SHMLBA boundary */
+#define	SHM_REMAP	040000	/* take-over region on attach */
+#define	SHM_EXEC	0100000	/* execution access */
+
+/* super user shmctl commands */
+#define SHM_LOCK 	11
+#define SHM_UNLOCK 	12
+
+/* ipcs ctl commands */
+#define SHM_STAT 	13
+#define SHM_INFO 	14
+
+/* Obsolete, used only for backwards compatibility */
+struct	shminfo {
+	int shmmax;
+	int shmmin;
+	int shmmni;
+	int shmseg;
+	int shmall;
+};
+
+struct shm_info {
+	int used_ids;
+	unsigned long shm_tot;	/* total allocated shm */
+	unsigned long shm_rss;	/* total resident shm */
+	unsigned long shm_swp;	/* total swapped shm */
+	unsigned long swap_attempts;
+	unsigned long swap_successes;
+};
+
+
+#endif /* _UAPI_LINUX_SHM_H_ */
diff --git a/include/uapi/linux/signal.h b/include/uapi/linux/signal.h
new file mode 100644
index 0000000..dff452e
--- /dev/null
+++ b/include/uapi/linux/signal.h
@@ -0,0 +1,8 @@
+#ifndef _UAPI_LINUX_SIGNAL_H
+#define _UAPI_LINUX_SIGNAL_H
+
+#include <asm/signal.h>
+#include <asm/siginfo.h>
+
+
+#endif /* _UAPI_LINUX_SIGNAL_H */
diff --git a/include/uapi/linux/signalfd.h b/include/uapi/linux/signalfd.h
new file mode 100644
index 0000000..492c6de
--- /dev/null
+++ b/include/uapi/linux/signalfd.h
@@ -0,0 +1,52 @@
+/*
+ *  include/linux/signalfd.h
+ *
+ *  Copyright (C) 2007  Davide Libenzi <davidel@xmailserver.org>
+ *
+ */
+
+#ifndef _UAPI_LINUX_SIGNALFD_H
+#define _UAPI_LINUX_SIGNALFD_H
+
+#include <linux/types.h>
+/* For O_CLOEXEC and O_NONBLOCK */
+#include <linux/fcntl.h>
+
+/* Flags for signalfd4.  */
+#define SFD_CLOEXEC O_CLOEXEC
+#define SFD_NONBLOCK O_NONBLOCK
+
+struct signalfd_siginfo {
+	__u32 ssi_signo;
+	__s32 ssi_errno;
+	__s32 ssi_code;
+	__u32 ssi_pid;
+	__u32 ssi_uid;
+	__s32 ssi_fd;
+	__u32 ssi_tid;
+	__u32 ssi_band;
+	__u32 ssi_overrun;
+	__u32 ssi_trapno;
+	__s32 ssi_status;
+	__s32 ssi_int;
+	__u64 ssi_ptr;
+	__u64 ssi_utime;
+	__u64 ssi_stime;
+	__u64 ssi_addr;
+	__u16 ssi_addr_lsb;
+
+	/*
+	 * Pad strcture to 128 bytes. Remember to update the
+	 * pad size when you add new members. We use a fixed
+	 * size structure to avoid compatibility problems with
+	 * future versions, and we leave extra space for additional
+	 * members. We use fixed size members because this strcture
+	 * comes out of a read(2) and we really don't want to have
+	 * a compat on read(2).
+	 */
+	__u8 __pad[46];
+};
+
+
+
+#endif /* _UAPI_LINUX_SIGNALFD_H */
diff --git a/include/linux/snmp.h b/include/uapi/linux/snmp.h
similarity index 100%
rename from include/linux/snmp.h
rename to include/uapi/linux/snmp.h
diff --git a/include/uapi/linux/sock_diag.h b/include/uapi/linux/sock_diag.h
new file mode 100644
index 0000000..b00e29e
--- /dev/null
+++ b/include/uapi/linux/sock_diag.h
@@ -0,0 +1,26 @@
+#ifndef _UAPI__SOCK_DIAG_H__
+#define _UAPI__SOCK_DIAG_H__
+
+#include <linux/types.h>
+
+#define SOCK_DIAG_BY_FAMILY 20
+
+struct sock_diag_req {
+	__u8	sdiag_family;
+	__u8	sdiag_protocol;
+};
+
+enum {
+	SK_MEMINFO_RMEM_ALLOC,
+	SK_MEMINFO_RCVBUF,
+	SK_MEMINFO_WMEM_ALLOC,
+	SK_MEMINFO_SNDBUF,
+	SK_MEMINFO_FWD_ALLOC,
+	SK_MEMINFO_WMEM_QUEUED,
+	SK_MEMINFO_OPTMEM,
+	SK_MEMINFO_BACKLOG,
+
+	SK_MEMINFO_VARS,
+};
+
+#endif /* _UAPI__SOCK_DIAG_H__ */
diff --git a/include/uapi/linux/socket.h b/include/uapi/linux/socket.h
new file mode 100644
index 0000000..76ab0c6
--- /dev/null
+++ b/include/uapi/linux/socket.h
@@ -0,0 +1,21 @@
+#ifndef _UAPI_LINUX_SOCKET_H
+#define _UAPI_LINUX_SOCKET_H
+
+/*
+ * Desired design of maximum size and alignment (see RFC2553)
+ */
+#define _K_SS_MAXSIZE	128	/* Implementation specific max size */
+#define _K_SS_ALIGNSIZE	(__alignof__ (struct sockaddr *))
+				/* Implementation specific desired alignment */
+
+typedef unsigned short __kernel_sa_family_t;
+
+struct __kernel_sockaddr_storage {
+	__kernel_sa_family_t	ss_family;		/* address family */
+	/* Following field(s) are implementation specific */
+	char		__data[_K_SS_MAXSIZE - sizeof(unsigned short)];
+				/* space to achieve desired size, */
+				/* _SS_MAXSIZE value minus size of ss_family */
+} __attribute__ ((aligned(_K_SS_ALIGNSIZE)));	/* force desired alignment */
+
+#endif /* _UAPI_LINUX_SOCKET_H */
diff --git a/include/linux/sockios.h b/include/uapi/linux/sockios.h
similarity index 100%
rename from include/linux/sockios.h
rename to include/uapi/linux/sockios.h
diff --git a/include/linux/som.h b/include/uapi/linux/som.h
similarity index 100%
rename from include/linux/som.h
rename to include/uapi/linux/som.h
diff --git a/include/uapi/linux/sonet.h b/include/uapi/linux/sonet.h
new file mode 100644
index 0000000..cc54ace
--- /dev/null
+++ b/include/uapi/linux/sonet.h
@@ -0,0 +1,60 @@
+/* sonet.h - SONET/SHD physical layer control */
+ 
+/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+ 
+
+#ifndef _UAPILINUX_SONET_H
+#define _UAPILINUX_SONET_H
+
+#define __SONET_ITEMS \
+    __HANDLE_ITEM(section_bip); 	/* section parity errors (B1) */ \
+    __HANDLE_ITEM(line_bip);		/* line parity errors (B2) */ \
+    __HANDLE_ITEM(path_bip);		/* path parity errors (B3) */ \
+    __HANDLE_ITEM(line_febe);		/* line parity errors at remote */ \
+    __HANDLE_ITEM(path_febe);		/* path parity errors at remote */ \
+    __HANDLE_ITEM(corr_hcs);		/* correctable header errors */ \
+    __HANDLE_ITEM(uncorr_hcs);		/* uncorrectable header errors */ \
+    __HANDLE_ITEM(tx_cells);		/* cells sent */ \
+    __HANDLE_ITEM(rx_cells);		/* cells received */
+
+struct sonet_stats {
+#define __HANDLE_ITEM(i) int i
+	__SONET_ITEMS
+#undef __HANDLE_ITEM
+} __attribute__ ((packed));
+
+
+#define SONET_GETSTAT	_IOR('a',ATMIOC_PHYTYP,struct sonet_stats)
+					/* get statistics */
+#define SONET_GETSTATZ	_IOR('a',ATMIOC_PHYTYP+1,struct sonet_stats)
+					/* ... and zero counters */
+#define SONET_SETDIAG	_IOWR('a',ATMIOC_PHYTYP+2,int)
+					/* set error insertion */
+#define SONET_CLRDIAG	_IOWR('a',ATMIOC_PHYTYP+3,int)
+					/* clear error insertion */
+#define SONET_GETDIAG	_IOR('a',ATMIOC_PHYTYP+4,int)
+					/* query error insertion */
+#define SONET_SETFRAMING _IOW('a',ATMIOC_PHYTYP+5,int)
+					/* set framing mode (SONET/SDH) */
+#define SONET_GETFRAMING _IOR('a',ATMIOC_PHYTYP+6,int)
+					/* get framing mode */
+#define SONET_GETFRSENSE _IOR('a',ATMIOC_PHYTYP+7, \
+  unsigned char[SONET_FRSENSE_SIZE])	/* get framing sense information */
+
+#define SONET_INS_SBIP	  1		/* section BIP */
+#define SONET_INS_LBIP	  2		/* line BIP */
+#define SONET_INS_PBIP	  4		/* path BIP */
+#define SONET_INS_FRAME	  8		/* out of frame */
+#define SONET_INS_LOS	 16		/* set line to zero */
+#define SONET_INS_LAIS	 32		/* line alarm indication signal */
+#define SONET_INS_PAIS	 64		/* path alarm indication signal */
+#define SONET_INS_HCS	128		/* insert HCS error */
+
+#define SONET_FRAME_SONET 0		/* SONET STS-3 framing */
+#define SONET_FRAME_SDH   1		/* SDH STM-1 framing */
+
+#define SONET_FRSENSE_SIZE 6		/* C1[3],H1[3] (0xff for unknown) */
+
+
+
+#endif /* _UAPILINUX_SONET_H */
diff --git a/include/uapi/linux/sonypi.h b/include/uapi/linux/sonypi.h
new file mode 100644
index 0000000..85078a2
--- /dev/null
+++ b/include/uapi/linux/sonypi.h
@@ -0,0 +1,146 @@
+/*
+ * Sony Programmable I/O Control Device driver for VAIO
+ *
+ * Copyright (C) 2001-2005 Stelian Pop <stelian@popies.net>
+ *
+ * Copyright (C) 2005 Narayanan R S <nars@kadamba.org>
+
+ * Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ *
+ * Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
+ *
+ * Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
+ *
+ * Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
+ *
+ * Copyright (C) 2000 Andrew Tridgell <tridge@valinux.com>
+ *
+ * Earlier work by Werner Almesberger, Paul `Rusty' Russell and Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef _UAPI_SONYPI_H_
+#define _UAPI_SONYPI_H_
+
+#include <linux/types.h>
+
+/* events the user application reading /dev/sonypi can use */
+
+#define SONYPI_EVENT_IGNORE			 0
+#define SONYPI_EVENT_JOGDIAL_DOWN		 1
+#define SONYPI_EVENT_JOGDIAL_UP			 2
+#define SONYPI_EVENT_JOGDIAL_DOWN_PRESSED	 3
+#define SONYPI_EVENT_JOGDIAL_UP_PRESSED		 4
+#define SONYPI_EVENT_JOGDIAL_PRESSED		 5
+#define SONYPI_EVENT_JOGDIAL_RELEASED		 6	/* obsolete */
+#define SONYPI_EVENT_CAPTURE_PRESSED		 7
+#define SONYPI_EVENT_CAPTURE_RELEASED		 8	/* obsolete */
+#define SONYPI_EVENT_CAPTURE_PARTIALPRESSED	 9
+#define SONYPI_EVENT_CAPTURE_PARTIALRELEASED	10
+#define SONYPI_EVENT_FNKEY_ESC			11
+#define SONYPI_EVENT_FNKEY_F1			12
+#define SONYPI_EVENT_FNKEY_F2			13
+#define SONYPI_EVENT_FNKEY_F3			14
+#define SONYPI_EVENT_FNKEY_F4			15
+#define SONYPI_EVENT_FNKEY_F5			16
+#define SONYPI_EVENT_FNKEY_F6			17
+#define SONYPI_EVENT_FNKEY_F7			18
+#define SONYPI_EVENT_FNKEY_F8			19
+#define SONYPI_EVENT_FNKEY_F9			20
+#define SONYPI_EVENT_FNKEY_F10			21
+#define SONYPI_EVENT_FNKEY_F11			22
+#define SONYPI_EVENT_FNKEY_F12			23
+#define SONYPI_EVENT_FNKEY_1			24
+#define SONYPI_EVENT_FNKEY_2			25
+#define SONYPI_EVENT_FNKEY_D			26
+#define SONYPI_EVENT_FNKEY_E			27
+#define SONYPI_EVENT_FNKEY_F			28
+#define SONYPI_EVENT_FNKEY_S			29
+#define SONYPI_EVENT_FNKEY_B			30
+#define SONYPI_EVENT_BLUETOOTH_PRESSED		31
+#define SONYPI_EVENT_PKEY_P1			32
+#define SONYPI_EVENT_PKEY_P2			33
+#define SONYPI_EVENT_PKEY_P3			34
+#define SONYPI_EVENT_BACK_PRESSED		35
+#define SONYPI_EVENT_LID_CLOSED			36
+#define SONYPI_EVENT_LID_OPENED			37
+#define SONYPI_EVENT_BLUETOOTH_ON		38
+#define SONYPI_EVENT_BLUETOOTH_OFF		39
+#define SONYPI_EVENT_HELP_PRESSED		40
+#define SONYPI_EVENT_FNKEY_ONLY			41
+#define SONYPI_EVENT_JOGDIAL_FAST_DOWN		42
+#define SONYPI_EVENT_JOGDIAL_FAST_UP		43
+#define SONYPI_EVENT_JOGDIAL_FAST_DOWN_PRESSED	44
+#define SONYPI_EVENT_JOGDIAL_FAST_UP_PRESSED	45
+#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN		46
+#define SONYPI_EVENT_JOGDIAL_VFAST_UP		47
+#define SONYPI_EVENT_JOGDIAL_VFAST_DOWN_PRESSED	48
+#define SONYPI_EVENT_JOGDIAL_VFAST_UP_PRESSED	49
+#define SONYPI_EVENT_ZOOM_PRESSED		50
+#define SONYPI_EVENT_THUMBPHRASE_PRESSED	51
+#define SONYPI_EVENT_MEYE_FACE			52
+#define SONYPI_EVENT_MEYE_OPPOSITE		53
+#define SONYPI_EVENT_MEMORYSTICK_INSERT		54
+#define SONYPI_EVENT_MEMORYSTICK_EJECT		55
+#define SONYPI_EVENT_ANYBUTTON_RELEASED		56
+#define SONYPI_EVENT_BATTERY_INSERT		57
+#define SONYPI_EVENT_BATTERY_REMOVE		58
+#define SONYPI_EVENT_FNKEY_RELEASED		59
+#define SONYPI_EVENT_WIRELESS_ON		60
+#define SONYPI_EVENT_WIRELESS_OFF		61
+#define SONYPI_EVENT_ZOOM_IN_PRESSED		62
+#define SONYPI_EVENT_ZOOM_OUT_PRESSED		63
+#define SONYPI_EVENT_CD_EJECT_PRESSED		64
+#define SONYPI_EVENT_MODEKEY_PRESSED		65
+#define SONYPI_EVENT_PKEY_P4			66
+#define SONYPI_EVENT_PKEY_P5			67
+#define SONYPI_EVENT_SETTINGKEY_PRESSED		68
+#define SONYPI_EVENT_VOLUME_INC_PRESSED		69
+#define SONYPI_EVENT_VOLUME_DEC_PRESSED		70
+#define SONYPI_EVENT_BRIGHTNESS_PRESSED		71
+#define SONYPI_EVENT_MEDIA_PRESSED		72
+#define SONYPI_EVENT_VENDOR_PRESSED		73
+
+/* get/set brightness */
+#define SONYPI_IOCGBRT		_IOR('v', 0, __u8)
+#define SONYPI_IOCSBRT		_IOW('v', 0, __u8)
+
+/* get battery full capacity/remaining capacity */
+#define SONYPI_IOCGBAT1CAP	_IOR('v', 2, __u16)
+#define SONYPI_IOCGBAT1REM	_IOR('v', 3, __u16)
+#define SONYPI_IOCGBAT2CAP	_IOR('v', 4, __u16)
+#define SONYPI_IOCGBAT2REM	_IOR('v', 5, __u16)
+
+/* get battery flags: battery1/battery2/ac adapter present */
+#define SONYPI_BFLAGS_B1	0x01
+#define SONYPI_BFLAGS_B2	0x02
+#define SONYPI_BFLAGS_AC	0x04
+#define SONYPI_IOCGBATFLAGS	_IOR('v', 7, __u8)
+
+/* get/set bluetooth subsystem state on/off */
+#define SONYPI_IOCGBLUE		_IOR('v', 8, __u8)
+#define SONYPI_IOCSBLUE		_IOW('v', 9, __u8)
+
+/* get/set fan state on/off */
+#define SONYPI_IOCGFAN		_IOR('v', 10, __u8)
+#define SONYPI_IOCSFAN		_IOW('v', 11, __u8)
+
+/* get temperature (C) */
+#define SONYPI_IOCGTEMP		_IOR('v', 12, __u8)
+
+
+#endif /* _UAPI_SONYPI_H_ */
diff --git a/include/uapi/linux/sound.h b/include/uapi/linux/sound.h
new file mode 100644
index 0000000..014c911
--- /dev/null
+++ b/include/uapi/linux/sound.h
@@ -0,0 +1,31 @@
+#ifndef _UAPI_LINUX_SOUND_H
+#define _UAPI_LINUX_SOUND_H
+
+/*
+ * Minor numbers for the sound driver.
+ */
+
+#include <linux/fs.h>
+
+#define SND_DEV_CTL		0	/* Control port /dev/mixer */
+#define SND_DEV_SEQ		1	/* Sequencer output /dev/sequencer (FM
+						synthesizer and MIDI output) */
+#define SND_DEV_MIDIN		2	/* Raw midi access */
+#define SND_DEV_DSP		3	/* Digitized voice /dev/dsp */
+#define SND_DEV_AUDIO		4	/* Sparc compatible /dev/audio */
+#define SND_DEV_DSP16		5	/* Like /dev/dsp but 16 bits/sample */
+/* #define SND_DEV_STATUS	6 */	/* /dev/sndstat (obsolete) */
+#define SND_DEV_UNUSED		6
+#define SND_DEV_AWFM		7	/* Reserved */
+#define SND_DEV_SEQ2		8	/* /dev/sequencer, level 2 interface */
+/* #define SND_DEV_SNDPROC	9 */	/* /dev/sndproc for programmable devices (not used) */
+/* #define SND_DEV_DMMIDI	9 */
+#define SND_DEV_SYNTH		9	/* Raw synth access /dev/synth (same as /dev/dmfm) */
+#define SND_DEV_DMFM		10	/* Raw synth access /dev/dmfm */
+#define SND_DEV_UNKNOWN11	11
+#define SND_DEV_ADSP		12	/* Like /dev/dsp (obsolete) */
+#define SND_DEV_AMIDI		13	/* Like /dev/midi (obsolete) */
+#define SND_DEV_ADMMIDI		14	/* Like /dev/dmmidi (onsolete) */
+
+
+#endif /* _UAPI_LINUX_SOUND_H */
diff --git a/include/uapi/linux/soundcard.h b/include/uapi/linux/soundcard.h
new file mode 100644
index 0000000..f3b21f9
--- /dev/null
+++ b/include/uapi/linux/soundcard.h
@@ -0,0 +1,1282 @@
+/*
+ * Copyright by Hannu Savolainen 1993-1997
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met: 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer. 2.
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+#ifndef _UAPISOUNDCARD_H
+#define _UAPISOUNDCARD_H
+
+
+/*
+ * OSS interface version. With versions earlier than 3.6 this value is
+ * an integer with value less than 361. In versions 3.6 and later
+ * it's a six digit hexadecimal value. For example value
+ * of 0x030600 represents OSS version 3.6.0.
+ * Use ioctl(fd, OSS_GETVERSION, &int) to get the version number of
+ * the currently active driver.
+ */
+#define SOUND_VERSION	0x030802
+#define OPEN_SOUND_SYSTEM
+
+/* In Linux we need to be prepared for cross compiling */
+#include <linux/ioctl.h>
+
+/* Endian macros. */
+#ifndef __KERNEL__
+#  include <endian.h>
+#endif
+
+/*
+ *	Supported card ID numbers (Should be somewhere else?)
+ */
+
+#define SNDCARD_ADLIB		1
+#define SNDCARD_SB		2
+#define SNDCARD_PAS		3
+#define SNDCARD_GUS		4
+#define SNDCARD_MPU401		5
+#define SNDCARD_SB16		6
+#define SNDCARD_SB16MIDI	7
+#define SNDCARD_UART6850	8
+#define SNDCARD_GUS16		9
+#define SNDCARD_MSS		10
+#define SNDCARD_PSS     	11
+#define SNDCARD_SSCAPE		12
+#define SNDCARD_PSS_MPU     	13
+#define SNDCARD_PSS_MSS     	14
+#define SNDCARD_SSCAPE_MSS	15
+#define SNDCARD_TRXPRO		16
+#define SNDCARD_TRXPRO_SB	17
+#define SNDCARD_TRXPRO_MPU	18
+#define SNDCARD_MAD16		19
+#define SNDCARD_MAD16_MPU	20
+#define SNDCARD_CS4232		21
+#define SNDCARD_CS4232_MPU	22
+#define SNDCARD_MAUI		23
+#define SNDCARD_PSEUDO_MSS	24
+#define SNDCARD_GUSPNP		25
+#define SNDCARD_UART401		26
+/* Sound card numbers 27 to N are reserved. Don't add more numbers here. */
+
+/***********************************
+ * IOCTL Commands for /dev/sequencer
+ */
+
+#ifndef _SIOWR
+#if defined(_IOWR) && (defined(_AIX) || (!defined(sun) && !defined(sparc) && !defined(__sparc__) && !defined(__INCioctlh) && !defined(__Lynx__)))
+/* Use already defined ioctl defines if they exist (except with Sun or Sparc) */
+#define	SIOCPARM_MASK	IOCPARM_MASK
+#define	SIOC_VOID	IOC_VOID
+#define	SIOC_OUT	IOC_OUT
+#define	SIOC_IN		IOC_IN
+#define	SIOC_INOUT	IOC_INOUT
+#define _SIOC_SIZE	_IOC_SIZE
+#define _SIOC_DIR	_IOC_DIR
+#define _SIOC_NONE	_IOC_NONE
+#define _SIOC_READ	_IOC_READ
+#define _SIOC_WRITE	_IOC_WRITE
+#define	_SIO		_IO
+#define	_SIOR		_IOR
+#define	_SIOW		_IOW
+#define	_SIOWR		_IOWR
+#else
+
+/* Ioctl's have the command encoded in the lower word,
+ * and the size of any in or out parameters in the upper
+ * word.  The high 2 bits of the upper word are used
+ * to encode the in/out status of the parameter; for now
+ * we restrict parameters to at most 8191 bytes.
+ */
+/* #define	SIOCTYPE		(0xff<<8) */
+#define	SIOCPARM_MASK	0x1fff		/* parameters must be < 8192 bytes */
+#define	SIOC_VOID	0x00000000	/* no parameters */
+#define	SIOC_OUT	0x20000000	/* copy out parameters */
+#define	SIOC_IN		0x40000000	/* copy in parameters */
+#define	SIOC_INOUT	(SIOC_IN|SIOC_OUT)
+/* the 0x20000000 is so we can distinguish new ioctl's from old */
+#define	_SIO(x,y)	((int)(SIOC_VOID|(x<<8)|y))
+#define	_SIOR(x,y,t)	((int)(SIOC_OUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+#define	_SIOW(x,y,t)	((int)(SIOC_IN|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+/* this should be _SIORW, but stdio got there first */
+#define	_SIOWR(x,y,t)	((int)(SIOC_INOUT|((sizeof(t)&SIOCPARM_MASK)<<16)|(x<<8)|y))
+#define _SIOC_SIZE(x)	((x>>16)&SIOCPARM_MASK)	
+#define _SIOC_DIR(x)	(x & 0xf0000000)
+#define _SIOC_NONE	SIOC_VOID
+#define _SIOC_READ	SIOC_OUT
+#define _SIOC_WRITE	SIOC_IN
+#  endif /* _IOWR */
+#endif  /* !_SIOWR */
+
+#define SNDCTL_SEQ_RESET		_SIO  ('Q', 0)
+#define SNDCTL_SEQ_SYNC			_SIO  ('Q', 1)
+#define SNDCTL_SYNTH_INFO		_SIOWR('Q', 2, struct synth_info)
+#define SNDCTL_SEQ_CTRLRATE		_SIOWR('Q', 3, int)	/* Set/get timer resolution (HZ) */
+#define SNDCTL_SEQ_GETOUTCOUNT		_SIOR ('Q', 4, int)
+#define SNDCTL_SEQ_GETINCOUNT		_SIOR ('Q', 5, int)
+#define SNDCTL_SEQ_PERCMODE		_SIOW ('Q', 6, int)
+#define SNDCTL_FM_LOAD_INSTR		_SIOW ('Q', 7, struct sbi_instrument)	/* Obsolete. Don't use!!!!!! */
+#define SNDCTL_SEQ_TESTMIDI		_SIOW ('Q', 8, int)
+#define SNDCTL_SEQ_RESETSAMPLES		_SIOW ('Q', 9, int)
+#define SNDCTL_SEQ_NRSYNTHS		_SIOR ('Q',10, int)
+#define SNDCTL_SEQ_NRMIDIS		_SIOR ('Q',11, int)
+#define SNDCTL_MIDI_INFO		_SIOWR('Q',12, struct midi_info)
+#define SNDCTL_SEQ_THRESHOLD		_SIOW ('Q',13, int)
+#define SNDCTL_SYNTH_MEMAVL		_SIOWR('Q',14, int)	/* in=dev#, out=memsize */
+#define SNDCTL_FM_4OP_ENABLE		_SIOW ('Q',15, int)	/* in=dev# */
+#define SNDCTL_SEQ_PANIC		_SIO  ('Q',17)
+#define SNDCTL_SEQ_OUTOFBAND		_SIOW ('Q',18, struct seq_event_rec)
+#define SNDCTL_SEQ_GETTIME		_SIOR ('Q',19, int)
+#define SNDCTL_SYNTH_ID			_SIOWR('Q',20, struct synth_info)
+#define SNDCTL_SYNTH_CONTROL		_SIOWR('Q',21, struct synth_control)
+#define SNDCTL_SYNTH_REMOVESAMPLE	_SIOWR('Q',22, struct remove_sample)
+
+typedef struct synth_control
+{
+	int devno;	/* Synthesizer # */
+	char data[4000]; /* Device spesific command/data record */
+}synth_control;
+
+typedef struct remove_sample
+{
+	int devno;	/* Synthesizer # */
+	int bankno;	/* MIDI bank # (0=General MIDI) */
+	int instrno;	/* MIDI instrument number */
+} remove_sample;
+
+typedef struct seq_event_rec {
+		unsigned char arr[8];
+} seq_event_rec;
+
+#define SNDCTL_TMR_TIMEBASE		_SIOWR('T', 1, int)
+#define SNDCTL_TMR_START		_SIO  ('T', 2)
+#define SNDCTL_TMR_STOP			_SIO  ('T', 3)
+#define SNDCTL_TMR_CONTINUE		_SIO  ('T', 4)
+#define SNDCTL_TMR_TEMPO		_SIOWR('T', 5, int)
+#define SNDCTL_TMR_SOURCE		_SIOWR('T', 6, int)
+#	define TMR_INTERNAL		0x00000001
+#	define TMR_EXTERNAL		0x00000002
+#		define TMR_MODE_MIDI	0x00000010
+#		define TMR_MODE_FSK	0x00000020
+#		define TMR_MODE_CLS	0x00000040
+#		define TMR_MODE_SMPTE	0x00000080
+#define SNDCTL_TMR_METRONOME		_SIOW ('T', 7, int)
+#define SNDCTL_TMR_SELECT		_SIOW ('T', 8, int)
+
+/*
+ * Some big endian/little endian handling macros
+ */
+
+#define _LINUX_PATCHKEY_H_INDIRECT
+#include <linux/patchkey.h>
+#undef _LINUX_PATCHKEY_H_INDIRECT
+
+#if !defined(__KERNEL__)
+# if defined(__BYTE_ORDER)
+#  if __BYTE_ORDER == __BIG_ENDIAN
+#    define AFMT_S16_NE AFMT_S16_BE
+#  elif __BYTE_ORDER == __LITTLE_ENDIAN
+#    define AFMT_S16_NE AFMT_S16_LE
+#  else
+#    error "could not determine byte order"
+#  endif
+# endif
+#endif
+
+/*
+ *	Sample loading mechanism for internal synthesizers (/dev/sequencer)
+ *	The following patch_info structure has been designed to support
+ *	Gravis UltraSound. It tries to be universal format for uploading
+ *	sample based patches but is probably too limited.
+ *
+ *      (PBD) As Hannu guessed, the GUS structure is too limited for 
+ *      the WaveFront, but this is the right place for a constant definition.
+ */
+
+struct patch_info {
+		unsigned short key;		/* Use WAVE_PATCH here */
+#define WAVE_PATCH	   _PATCHKEY(0x04)
+#define GUS_PATCH	   WAVE_PATCH
+#define WAVEFRONT_PATCH    _PATCHKEY(0x06)
+
+		short device_no;	/* Synthesizer number */
+		short instr_no;		/* Midi pgm# */
+
+		unsigned int mode;
+/*
+ * The least significant byte has the same format than the GUS .PAT
+ * files
+ */
+#define WAVE_16_BITS	0x01	/* bit 0 = 8 or 16 bit wave data. */
+#define WAVE_UNSIGNED	0x02	/* bit 1 = Signed - Unsigned data. */
+#define WAVE_LOOPING	0x04	/* bit 2 = looping enabled-1. */
+#define WAVE_BIDIR_LOOP	0x08	/* bit 3 = Set is bidirectional looping. */
+#define WAVE_LOOP_BACK	0x10	/* bit 4 = Set is looping backward. */
+#define WAVE_SUSTAIN_ON	0x20	/* bit 5 = Turn sustaining on. (Env. pts. 3)*/
+#define WAVE_ENVELOPES	0x40	/* bit 6 = Enable envelopes - 1 */
+#define WAVE_FAST_RELEASE 0x80	/* bit 7 = Shut off immediately after note off */
+				/* 	(use the env_rate/env_offs fields). */
+/* Linux specific bits */
+#define WAVE_VIBRATO	0x00010000	/* The vibrato info is valid */
+#define WAVE_TREMOLO	0x00020000	/* The tremolo info is valid */
+#define WAVE_SCALE	0x00040000	/* The scaling info is valid */
+#define WAVE_FRACTIONS	0x00080000	/* Fraction information is valid */
+/* Reserved bits */
+#define WAVE_ROM	0x40000000	/* For future use */
+#define WAVE_MULAW	0x20000000	/* For future use */
+/* Other bits must be zeroed */
+
+		int len;	/* Size of the wave data in bytes */
+		int loop_start, loop_end; /* Byte offsets from the beginning */
+
+/* 
+ * The base_freq and base_note fields are used when computing the
+ * playback speed for a note. The base_note defines the tone frequency
+ * which is heard if the sample is played using the base_freq as the
+ * playback speed.
+ *
+ * The low_note and high_note fields define the minimum and maximum note
+ * frequencies for which this sample is valid. It is possible to define
+ * more than one samples for an instrument number at the same time. The
+ * low_note and high_note fields are used to select the most suitable one.
+ *
+ * The fields base_note, high_note and low_note should contain
+ * the note frequency multiplied by 1000. For example value for the
+ * middle A is 440*1000.
+ */
+
+		unsigned int base_freq;
+		unsigned int base_note;
+		unsigned int high_note;
+		unsigned int low_note;
+		int panning;	/* -128=left, 127=right */
+		int detuning;
+
+/*	New fields introduced in version 1.99.5	*/
+
+       /* Envelope. Enabled by mode bit WAVE_ENVELOPES	*/
+		unsigned char	env_rate[ 6 ];	 /* GUS HW ramping rate */
+		unsigned char	env_offset[ 6 ]; /* 255 == 100% */
+
+	/* 
+	 * The tremolo, vibrato and scale info are not supported yet.
+	 * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or
+	 * WAVE_SCALE
+	 */
+
+		unsigned char	tremolo_sweep;
+		unsigned char	tremolo_rate;
+		unsigned char	tremolo_depth;
+	
+		unsigned char	vibrato_sweep;
+		unsigned char	vibrato_rate;
+		unsigned char	vibrato_depth;
+
+		int		scale_frequency;
+		unsigned int	scale_factor;		/* from 0 to 2048 or 0 to 2 */
+	
+	        int		volume;
+		int		fractions;
+		int		reserved1;
+	        int		spare[2];
+		char data[1];	/* The waveform data starts here */
+	};
+
+struct sysex_info {
+		short key;		/* Use SYSEX_PATCH or MAUI_PATCH here */
+#define SYSEX_PATCH	_PATCHKEY(0x05)
+#define MAUI_PATCH	_PATCHKEY(0x06)
+		short device_no;	/* Synthesizer number */
+		int len;	/* Size of the sysex data in bytes */
+		unsigned char data[1];	/* Sysex data starts here */
+	};
+
+/*
+ * /dev/sequencer input events.
+ *
+ * The data written to the /dev/sequencer is a stream of events. Events
+ * are records of 4 or 8 bytes. The first byte defines the size. 
+ * Any number of events can be written with a write call. There
+ * is a set of macros for sending these events. Use these macros if you
+ * want to maximize portability of your program.
+ *
+ * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events.
+ * (All input events are currently 4 bytes long. Be prepared to support
+ * 8 byte events also. If you receive any event having first byte >= 128,
+ * it's a 8 byte event.
+ *
+ * The events are documented at the end of this file.
+ *
+ * Normal events (4 bytes)
+ * There is also a 8 byte version of most of the 4 byte events. The
+ * 8 byte one is recommended.
+ */
+#define SEQ_NOTEOFF		0
+#define SEQ_FMNOTEOFF		SEQ_NOTEOFF	/* Just old name */
+#define SEQ_NOTEON		1
+#define	SEQ_FMNOTEON		SEQ_NOTEON
+#define SEQ_WAIT		TMR_WAIT_ABS
+#define SEQ_PGMCHANGE		3
+#define SEQ_FMPGMCHANGE		SEQ_PGMCHANGE
+#define SEQ_SYNCTIMER		TMR_START
+#define SEQ_MIDIPUTC		5
+#define SEQ_DRUMON		6	/*** OBSOLETE ***/
+#define SEQ_DRUMOFF		7	/*** OBSOLETE ***/
+#define SEQ_ECHO		TMR_ECHO	/* For synching programs with output */
+#define SEQ_AFTERTOUCH		9
+#define SEQ_CONTROLLER		10
+
+/*******************************************
+ *	Midi controller numbers
+ *******************************************
+ * Controllers 0 to 31 (0x00 to 0x1f) and
+ * 32 to 63 (0x20 to 0x3f) are continuous
+ * controllers.
+ * In the MIDI 1.0 these controllers are sent using
+ * two messages. Controller numbers 0 to 31 are used
+ * to send the MSB and the controller numbers 32 to 63
+ * are for the LSB. Note that just 7 bits are used in MIDI bytes.
+ */
+
+#define	   CTL_BANK_SELECT		0x00
+#define	   CTL_MODWHEEL			0x01
+#define    CTL_BREATH			0x02
+/*		undefined		0x03 */
+#define    CTL_FOOT			0x04
+#define    CTL_PORTAMENTO_TIME		0x05
+#define    CTL_DATA_ENTRY		0x06
+#define    CTL_MAIN_VOLUME		0x07
+#define    CTL_BALANCE			0x08
+/*		undefined		0x09 */
+#define    CTL_PAN			0x0a
+#define    CTL_EXPRESSION		0x0b
+/*		undefined		0x0c */
+/*		undefined		0x0d */
+/*		undefined		0x0e */
+/*		undefined		0x0f */
+#define    CTL_GENERAL_PURPOSE1	0x10
+#define    CTL_GENERAL_PURPOSE2	0x11
+#define    CTL_GENERAL_PURPOSE3	0x12
+#define    CTL_GENERAL_PURPOSE4	0x13
+/*		undefined		0x14 - 0x1f */
+
+/*		undefined		0x20 */
+/* The controller numbers 0x21 to 0x3f are reserved for the */
+/* least significant bytes of the controllers 0x00 to 0x1f. */
+/* These controllers are not recognised by the driver. */
+
+/* Controllers 64 to 69 (0x40 to 0x45) are on/off switches. */
+/* 0=OFF and 127=ON (intermediate values are possible) */
+#define    CTL_DAMPER_PEDAL		0x40
+#define    CTL_SUSTAIN			0x40	/* Alias */
+#define    CTL_HOLD			0x40	/* Alias */
+#define    CTL_PORTAMENTO		0x41
+#define    CTL_SOSTENUTO		0x42
+#define    CTL_SOFT_PEDAL		0x43
+/*		undefined		0x44 */
+#define    CTL_HOLD2			0x45
+/*		undefined		0x46 - 0x4f */
+
+#define    CTL_GENERAL_PURPOSE5	0x50
+#define    CTL_GENERAL_PURPOSE6	0x51
+#define    CTL_GENERAL_PURPOSE7	0x52
+#define    CTL_GENERAL_PURPOSE8	0x53
+/*		undefined		0x54 - 0x5a */
+#define    CTL_EXT_EFF_DEPTH		0x5b
+#define    CTL_TREMOLO_DEPTH		0x5c
+#define    CTL_CHORUS_DEPTH		0x5d
+#define    CTL_DETUNE_DEPTH		0x5e
+#define    CTL_CELESTE_DEPTH		0x5e	/* Alias for the above one */
+#define    CTL_PHASER_DEPTH		0x5f
+#define    CTL_DATA_INCREMENT		0x60
+#define    CTL_DATA_DECREMENT		0x61
+#define    CTL_NONREG_PARM_NUM_LSB	0x62
+#define    CTL_NONREG_PARM_NUM_MSB	0x63
+#define    CTL_REGIST_PARM_NUM_LSB	0x64
+#define    CTL_REGIST_PARM_NUM_MSB	0x65
+/*		undefined		0x66 - 0x78 */
+/*		reserved		0x79 - 0x7f */
+
+/* Pseudo controllers (not midi compatible) */
+#define    CTRL_PITCH_BENDER		255
+#define    CTRL_PITCH_BENDER_RANGE	254
+#define    CTRL_EXPRESSION		253	/* Obsolete */
+#define    CTRL_MAIN_VOLUME		252	/* Obsolete */
+#define SEQ_BALANCE		11
+#define SEQ_VOLMODE             12
+
+/*
+ * Volume mode decides how volumes are used
+ */
+
+#define VOL_METHOD_ADAGIO	1
+#define VOL_METHOD_LINEAR	2
+
+/*
+ * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as
+ *	 input events.
+ */
+
+/*
+ * Event codes 0xf0 to 0xfc are reserved for future extensions.
+ */
+
+#define SEQ_FULLSIZE		0xfd	/* Long events */
+/*
+ *	SEQ_FULLSIZE events are used for loading patches/samples to the
+ *	synthesizer devices. These events are passed directly to the driver
+ *	of the associated synthesizer device. There is no limit to the size
+ *	of the extended events. These events are not queued but executed
+ *	immediately when the write() is called (execution can take several
+ *	seconds of time). 
+ *
+ *	When a SEQ_FULLSIZE message is written to the device, it must
+ *	be written using exactly one write() call. Other events cannot
+ *	be mixed to the same write.
+ *	
+ *	For FM synths (YM3812/OPL3) use struct sbi_instrument and write it to the 
+ *	/dev/sequencer. Don't write other data together with the instrument structure
+ *	Set the key field of the structure to FM_PATCH. The device field is used to
+ *	route the patch to the corresponding device.
+ *
+ *	For wave table use struct patch_info. Initialize the key field
+ *      to WAVE_PATCH.
+ */
+#define SEQ_PRIVATE		0xfe	/* Low level HW dependent events (8 bytes) */
+#define SEQ_EXTENDED		0xff	/* Extended events (8 bytes) OBSOLETE */
+
+/*
+ * Record for FM patches
+ */
+
+typedef unsigned char sbi_instr_data[32];
+
+struct sbi_instrument {
+		unsigned short	key;	/* FM_PATCH or OPL3_PATCH */
+#define FM_PATCH	_PATCHKEY(0x01)
+#define OPL3_PATCH	_PATCHKEY(0x03)
+		short		device;		/*	Synth# (0-4)	*/
+		int 		channel;	/*	Program# to be initialized 	*/
+		sbi_instr_data	operators;	/*	Register settings for operator cells (.SBI format)	*/
+	};
+
+struct synth_info {	/* Read only */
+		char	name[30];
+		int	device;		/* 0-N. INITIALIZE BEFORE CALLING */
+		int	synth_type;
+#define SYNTH_TYPE_FM			0
+#define SYNTH_TYPE_SAMPLE		1
+#define SYNTH_TYPE_MIDI			2	/* Midi interface */
+
+		int	synth_subtype;
+#define FM_TYPE_ADLIB			0x00
+#define FM_TYPE_OPL3			0x01
+#define MIDI_TYPE_MPU401		0x401
+
+#define SAMPLE_TYPE_BASIC		0x10
+#define SAMPLE_TYPE_GUS			SAMPLE_TYPE_BASIC
+#define SAMPLE_TYPE_WAVEFRONT           0x11
+
+		int	perc_mode;	/* No longer supported */
+		int	nr_voices;
+		int	nr_drums;	/* Obsolete field */
+		int	instr_bank_size;
+		unsigned int	capabilities;	
+#define SYNTH_CAP_PERCMODE		0x00000001 /* No longer used */
+#define SYNTH_CAP_OPL3			0x00000002 /* Set if OPL3 supported */
+#define SYNTH_CAP_INPUT			0x00000004 /* Input (MIDI) device */
+		int	dummies[19];	/* Reserve space */
+	};
+
+struct sound_timer_info {
+		char name[32];
+		int caps;
+	};
+
+#define MIDI_CAP_MPU401		1		/* MPU-401 intelligent mode */
+
+struct midi_info {
+		char		name[30];
+		int		device;		/* 0-N. INITIALIZE BEFORE CALLING */
+		unsigned int	capabilities;	/* To be defined later */
+		int		dev_type;
+		int		dummies[18];	/* Reserve space */
+	};
+
+/********************************************
+ * ioctl commands for the /dev/midi##
+ */
+typedef struct {
+		unsigned char cmd;
+		char nr_args, nr_returns;
+		unsigned char data[30];
+	} mpu_command_rec;
+
+#define SNDCTL_MIDI_PRETIME		_SIOWR('m', 0, int)
+#define SNDCTL_MIDI_MPUMODE		_SIOWR('m', 1, int)
+#define SNDCTL_MIDI_MPUCMD		_SIOWR('m', 2, mpu_command_rec)
+
+/********************************************
+ * IOCTL commands for /dev/dsp and /dev/audio
+ */
+
+#define SNDCTL_DSP_RESET		_SIO  ('P', 0)
+#define SNDCTL_DSP_SYNC			_SIO  ('P', 1)
+#define SNDCTL_DSP_SPEED		_SIOWR('P', 2, int)
+#define SNDCTL_DSP_STEREO		_SIOWR('P', 3, int)
+#define SNDCTL_DSP_GETBLKSIZE		_SIOWR('P', 4, int)
+#define SNDCTL_DSP_SAMPLESIZE		SNDCTL_DSP_SETFMT
+#define SNDCTL_DSP_CHANNELS		_SIOWR('P', 6, int)
+#define SOUND_PCM_WRITE_CHANNELS	SNDCTL_DSP_CHANNELS
+#define SOUND_PCM_WRITE_FILTER		_SIOWR('P', 7, int)
+#define SNDCTL_DSP_POST			_SIO  ('P', 8)
+#define SNDCTL_DSP_SUBDIVIDE		_SIOWR('P', 9, int)
+#define SNDCTL_DSP_SETFRAGMENT		_SIOWR('P',10, int)
+
+/*	Audio data formats (Note! U8=8 and S16_LE=16 for compatibility) */
+#define SNDCTL_DSP_GETFMTS		_SIOR ('P',11, int) /* Returns a mask */
+#define SNDCTL_DSP_SETFMT		_SIOWR('P',5, int) /* Selects ONE fmt*/
+#	define AFMT_QUERY		0x00000000	/* Return current fmt */
+#	define AFMT_MU_LAW		0x00000001
+#	define AFMT_A_LAW		0x00000002
+#	define AFMT_IMA_ADPCM		0x00000004
+#	define AFMT_U8			0x00000008
+#	define AFMT_S16_LE		0x00000010	/* Little endian signed 16*/
+#	define AFMT_S16_BE		0x00000020	/* Big endian signed 16 */
+#	define AFMT_S8			0x00000040
+#	define AFMT_U16_LE		0x00000080	/* Little endian U16 */
+#	define AFMT_U16_BE		0x00000100	/* Big endian U16 */
+#	define AFMT_MPEG		0x00000200	/* MPEG (2) audio */
+#	define AFMT_AC3		0x00000400	/* Dolby Digital AC3 */
+
+/*
+ * Buffer status queries.
+ */
+typedef struct audio_buf_info {
+			int fragments;	/* # of available fragments (partially usend ones not counted) */
+			int fragstotal;	/* Total # of fragments allocated */
+			int fragsize;	/* Size of a fragment in bytes */
+
+			int bytes;	/* Available space in bytes (includes partially used fragments) */
+			/* Note! 'bytes' could be more than fragments*fragsize */
+		} audio_buf_info;
+
+#define SNDCTL_DSP_GETOSPACE		_SIOR ('P',12, audio_buf_info)
+#define SNDCTL_DSP_GETISPACE		_SIOR ('P',13, audio_buf_info)
+#define SNDCTL_DSP_NONBLOCK		_SIO  ('P',14)
+#define SNDCTL_DSP_GETCAPS		_SIOR ('P',15, int)
+#	define DSP_CAP_REVISION		0x000000ff	/* Bits for revision level (0 to 255) */
+#	define DSP_CAP_DUPLEX		0x00000100	/* Full duplex record/playback */
+#	define DSP_CAP_REALTIME		0x00000200	/* Real time capability */
+#	define DSP_CAP_BATCH		0x00000400	/* Device has some kind of */
+							/* internal buffers which may */
+							/* cause some delays and */
+							/* decrease precision of timing */
+#	define DSP_CAP_COPROC		0x00000800	/* Has a coprocessor */
+							/* Sometimes it's a DSP */
+							/* but usually not */
+#	define DSP_CAP_TRIGGER		0x00001000	/* Supports SETTRIGGER */
+#	define DSP_CAP_MMAP		0x00002000	/* Supports mmap() */
+#	define DSP_CAP_MULTI		0x00004000	/* support multiple open */
+#	define DSP_CAP_BIND		0x00008000	/* channel binding to front/rear/cneter/lfe */
+
+
+#define SNDCTL_DSP_GETTRIGGER		_SIOR ('P',16, int)
+#define SNDCTL_DSP_SETTRIGGER		_SIOW ('P',16, int)
+#	define PCM_ENABLE_INPUT		0x00000001
+#	define PCM_ENABLE_OUTPUT		0x00000002
+
+typedef struct count_info {
+		int bytes;	/* Total # of bytes processed */
+		int blocks;	/* # of fragment transitions since last time */
+		int ptr;	/* Current DMA pointer value */
+	} count_info;
+
+#define SNDCTL_DSP_GETIPTR		_SIOR ('P',17, count_info)
+#define SNDCTL_DSP_GETOPTR		_SIOR ('P',18, count_info)
+
+typedef struct buffmem_desc {
+		unsigned *buffer;
+		int size;
+	} buffmem_desc;
+#define SNDCTL_DSP_MAPINBUF		_SIOR ('P', 19, buffmem_desc)
+#define SNDCTL_DSP_MAPOUTBUF		_SIOR ('P', 20, buffmem_desc)
+#define SNDCTL_DSP_SETSYNCRO		_SIO  ('P', 21)
+#define SNDCTL_DSP_SETDUPLEX		_SIO  ('P', 22)
+#define SNDCTL_DSP_GETODELAY		_SIOR ('P', 23, int)
+
+#define SNDCTL_DSP_GETCHANNELMASK		_SIOWR('P', 64, int)
+#define SNDCTL_DSP_BIND_CHANNEL		_SIOWR('P', 65, int)
+#	define DSP_BIND_QUERY		0x00000000
+#	define DSP_BIND_FRONT		0x00000001
+#	define DSP_BIND_SURR		0x00000002
+#	define DSP_BIND_CENTER_LFE	0x00000004
+#	define DSP_BIND_HANDSET		0x00000008
+#	define DSP_BIND_MIC		0x00000010
+#	define DSP_BIND_MODEM1		0x00000020
+#	define DSP_BIND_MODEM2		0x00000040
+#	define DSP_BIND_I2S		0x00000080
+#	define DSP_BIND_SPDIF		0x00000100
+
+#define SNDCTL_DSP_SETSPDIF		_SIOW ('P', 66, int)
+#define SNDCTL_DSP_GETSPDIF		_SIOR ('P', 67, int)
+#	define SPDIF_PRO	0x0001
+#	define SPDIF_N_AUD	0x0002
+#	define SPDIF_COPY	0x0004
+#	define SPDIF_PRE	0x0008
+#	define SPDIF_CC		0x07f0
+#	define SPDIF_L		0x0800
+#	define SPDIF_DRS	0x4000
+#	define SPDIF_V		0x8000
+
+/*
+ * Application's profile defines the way how playback underrun situations should be handled.
+ * 
+ *	APF_NORMAL (the default) and APF_NETWORK make the driver to cleanup the
+ *	playback buffer whenever an underrun occurs. This consumes some time
+ *	prevents looping the existing buffer.
+ *	APF_CPUINTENS is intended to be set by CPU intensive applications which
+ *	are likely to run out of time occasionally. In this mode the buffer cleanup is
+ *	disabled which saves CPU time but also let's the previous buffer content to
+ *	be played during the "pause" after the underrun.
+ */
+#define SNDCTL_DSP_PROFILE		_SIOW ('P', 23, int)
+#define	  APF_NORMAL	0	/* Normal applications */
+#define	  APF_NETWORK	1	/* Underruns probably caused by an "external" delay */
+#define   APF_CPUINTENS 2	/* Underruns probably caused by "overheating" the CPU */
+
+#define SOUND_PCM_READ_RATE		_SIOR ('P', 2, int)
+#define SOUND_PCM_READ_CHANNELS		_SIOR ('P', 6, int)
+#define SOUND_PCM_READ_BITS		_SIOR ('P', 5, int)
+#define SOUND_PCM_READ_FILTER		_SIOR ('P', 7, int)
+
+/* Some alias names */
+#define SOUND_PCM_WRITE_BITS		SNDCTL_DSP_SETFMT
+#define SOUND_PCM_WRITE_RATE		SNDCTL_DSP_SPEED
+#define SOUND_PCM_POST			SNDCTL_DSP_POST
+#define SOUND_PCM_RESET			SNDCTL_DSP_RESET
+#define SOUND_PCM_SYNC			SNDCTL_DSP_SYNC
+#define SOUND_PCM_SUBDIVIDE		SNDCTL_DSP_SUBDIVIDE
+#define SOUND_PCM_SETFRAGMENT		SNDCTL_DSP_SETFRAGMENT
+#define SOUND_PCM_GETFMTS		SNDCTL_DSP_GETFMTS
+#define SOUND_PCM_SETFMT		SNDCTL_DSP_SETFMT
+#define SOUND_PCM_GETOSPACE		SNDCTL_DSP_GETOSPACE
+#define SOUND_PCM_GETISPACE		SNDCTL_DSP_GETISPACE
+#define SOUND_PCM_NONBLOCK		SNDCTL_DSP_NONBLOCK
+#define SOUND_PCM_GETCAPS		SNDCTL_DSP_GETCAPS
+#define SOUND_PCM_GETTRIGGER		SNDCTL_DSP_GETTRIGGER
+#define SOUND_PCM_SETTRIGGER		SNDCTL_DSP_SETTRIGGER
+#define SOUND_PCM_SETSYNCRO		SNDCTL_DSP_SETSYNCRO
+#define SOUND_PCM_GETIPTR		SNDCTL_DSP_GETIPTR
+#define SOUND_PCM_GETOPTR		SNDCTL_DSP_GETOPTR
+#define SOUND_PCM_MAPINBUF		SNDCTL_DSP_MAPINBUF
+#define SOUND_PCM_MAPOUTBUF		SNDCTL_DSP_MAPOUTBUF
+
+/*
+ * ioctl calls to be used in communication with coprocessors and
+ * DSP chips.
+ */
+
+typedef struct copr_buffer {
+		int command;	/* Set to 0 if not used */
+		int flags;
+#define CPF_NONE		0x0000
+#define CPF_FIRST		0x0001	/* First block */
+#define CPF_LAST		0x0002	/* Last block */
+		int len;
+		int offs;	/* If required by the device (0 if not used) */
+
+		unsigned char data[4000]; /* NOTE! 4000 is not 4k */
+	} copr_buffer;
+
+typedef struct copr_debug_buf {
+		int command;	/* Used internally. Set to 0 */
+		int parm1;
+		int parm2;
+		int flags;	
+		int len;	/* Length of data in bytes */
+	} copr_debug_buf;
+
+typedef struct copr_msg {
+		int len;
+		unsigned char data[4000];
+	} copr_msg;
+
+#define SNDCTL_COPR_RESET             _SIO  ('C',  0)
+#define SNDCTL_COPR_LOAD	      _SIOWR('C',  1, copr_buffer)
+#define SNDCTL_COPR_RDATA	      _SIOWR('C',  2, copr_debug_buf)
+#define SNDCTL_COPR_RCODE	      _SIOWR('C',  3, copr_debug_buf)
+#define SNDCTL_COPR_WDATA	      _SIOW ('C',  4, copr_debug_buf)
+#define SNDCTL_COPR_WCODE	      _SIOW ('C',  5, copr_debug_buf)
+#define SNDCTL_COPR_RUN		      _SIOWR('C',  6, copr_debug_buf)
+#define SNDCTL_COPR_HALT	      _SIOWR('C',  7, copr_debug_buf)
+#define SNDCTL_COPR_SENDMSG	      _SIOWR('C',  8, copr_msg)
+#define SNDCTL_COPR_RCVMSG	      _SIOR ('C',  9, copr_msg)
+
+/*********************************************
+ * IOCTL commands for /dev/mixer
+ */
+	
+/* 
+ * Mixer devices
+ *
+ * There can be up to 20 different analog mixer channels. The
+ * SOUND_MIXER_NRDEVICES gives the currently supported maximum. 
+ * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells
+ * the devices supported by the particular mixer.
+ */
+
+#define SOUND_MIXER_NRDEVICES	25
+#define SOUND_MIXER_VOLUME	0
+#define SOUND_MIXER_BASS	1
+#define SOUND_MIXER_TREBLE	2
+#define SOUND_MIXER_SYNTH	3
+#define SOUND_MIXER_PCM		4
+#define SOUND_MIXER_SPEAKER	5
+#define SOUND_MIXER_LINE	6
+#define SOUND_MIXER_MIC		7
+#define SOUND_MIXER_CD		8
+#define SOUND_MIXER_IMIX	9	/*  Recording monitor  */
+#define SOUND_MIXER_ALTPCM	10
+#define SOUND_MIXER_RECLEV	11	/* Recording level */
+#define SOUND_MIXER_IGAIN	12	/* Input gain */
+#define SOUND_MIXER_OGAIN	13	/* Output gain */
+/* 
+ * The AD1848 codec and compatibles have three line level inputs
+ * (line, aux1 and aux2). Since each card manufacturer have assigned
+ * different meanings to these inputs, it's inpractical to assign
+ * specific meanings (line, cd, synth etc.) to them.
+ */
+#define SOUND_MIXER_LINE1	14	/* Input source 1  (aux1) */
+#define SOUND_MIXER_LINE2	15	/* Input source 2  (aux2) */
+#define SOUND_MIXER_LINE3	16	/* Input source 3  (line) */
+#define SOUND_MIXER_DIGITAL1	17	/* Digital (input) 1 */
+#define SOUND_MIXER_DIGITAL2	18	/* Digital (input) 2 */
+#define SOUND_MIXER_DIGITAL3	19	/* Digital (input) 3 */
+#define SOUND_MIXER_PHONEIN	20	/* Phone input */
+#define SOUND_MIXER_PHONEOUT	21	/* Phone output */
+#define SOUND_MIXER_VIDEO	22	/* Video/TV (audio) in */
+#define SOUND_MIXER_RADIO	23	/* Radio in */
+#define SOUND_MIXER_MONITOR	24	/* Monitor (usually mic) volume */
+
+/* Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) */
+/* Not counted to SOUND_MIXER_NRDEVICES, but use the same number space */
+#define SOUND_ONOFF_MIN		28
+#define SOUND_ONOFF_MAX		30
+
+/* Note!	Number 31 cannot be used since the sign bit is reserved */
+#define SOUND_MIXER_NONE	31
+
+/*
+ * The following unsupported macros are no longer functional.
+ * Use SOUND_MIXER_PRIVATE# macros in future.
+ */
+#define SOUND_MIXER_ENHANCE	SOUND_MIXER_NONE
+#define SOUND_MIXER_MUTE	SOUND_MIXER_NONE
+#define SOUND_MIXER_LOUD	SOUND_MIXER_NONE
+
+
+#define SOUND_DEVICE_LABELS	{"Vol  ", "Bass ", "Trebl", "Synth", "Pcm  ", "Spkr ", "Line ", \
+				 "Mic  ", "CD   ", "Mix  ", "Pcm2 ", "Rec  ", "IGain", "OGain", \
+				 "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \
+				 "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"}
+
+#define SOUND_DEVICE_NAMES	{"vol", "bass", "treble", "synth", "pcm", "speaker", "line", \
+				 "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \
+				 "line1", "line2", "line3", "dig1", "dig2", "dig3", \
+				 "phin", "phout", "video", "radio", "monitor"}
+
+/*	Device bitmask identifiers	*/
+
+#define SOUND_MIXER_RECSRC	0xff	/* Arg contains a bit for each recording source */
+#define SOUND_MIXER_DEVMASK	0xfe	/* Arg contains a bit for each supported device */
+#define SOUND_MIXER_RECMASK	0xfd	/* Arg contains a bit for each supported recording source */
+#define SOUND_MIXER_CAPS	0xfc
+#	define SOUND_CAP_EXCL_INPUT	0x00000001	/* Only one recording source at a time */
+#define SOUND_MIXER_STEREODEVS	0xfb	/* Mixer channels supporting stereo */
+#define SOUND_MIXER_OUTSRC	0xfa	/* Arg contains a bit for each input source to output */
+#define SOUND_MIXER_OUTMASK	0xf9	/* Arg contains a bit for each supported input source to output */
+
+/*	Device mask bits	*/
+
+#define SOUND_MASK_VOLUME	(1 << SOUND_MIXER_VOLUME)
+#define SOUND_MASK_BASS		(1 << SOUND_MIXER_BASS)
+#define SOUND_MASK_TREBLE	(1 << SOUND_MIXER_TREBLE)
+#define SOUND_MASK_SYNTH	(1 << SOUND_MIXER_SYNTH)
+#define SOUND_MASK_PCM		(1 << SOUND_MIXER_PCM)
+#define SOUND_MASK_SPEAKER	(1 << SOUND_MIXER_SPEAKER)
+#define SOUND_MASK_LINE		(1 << SOUND_MIXER_LINE)
+#define SOUND_MASK_MIC		(1 << SOUND_MIXER_MIC)
+#define SOUND_MASK_CD		(1 << SOUND_MIXER_CD)
+#define SOUND_MASK_IMIX		(1 << SOUND_MIXER_IMIX)
+#define SOUND_MASK_ALTPCM	(1 << SOUND_MIXER_ALTPCM)
+#define SOUND_MASK_RECLEV	(1 << SOUND_MIXER_RECLEV)
+#define SOUND_MASK_IGAIN	(1 << SOUND_MIXER_IGAIN)
+#define SOUND_MASK_OGAIN	(1 << SOUND_MIXER_OGAIN)
+#define SOUND_MASK_LINE1	(1 << SOUND_MIXER_LINE1)
+#define SOUND_MASK_LINE2	(1 << SOUND_MIXER_LINE2)
+#define SOUND_MASK_LINE3	(1 << SOUND_MIXER_LINE3)
+#define SOUND_MASK_DIGITAL1	(1 << SOUND_MIXER_DIGITAL1)
+#define SOUND_MASK_DIGITAL2	(1 << SOUND_MIXER_DIGITAL2)
+#define SOUND_MASK_DIGITAL3	(1 << SOUND_MIXER_DIGITAL3)
+#define SOUND_MASK_PHONEIN	(1 << SOUND_MIXER_PHONEIN)
+#define SOUND_MASK_PHONEOUT	(1 << SOUND_MIXER_PHONEOUT)
+#define SOUND_MASK_RADIO	(1 << SOUND_MIXER_RADIO)
+#define SOUND_MASK_VIDEO	(1 << SOUND_MIXER_VIDEO)
+#define SOUND_MASK_MONITOR	(1 << SOUND_MIXER_MONITOR)
+
+/* Obsolete macros */
+#define SOUND_MASK_MUTE		(1 << SOUND_MIXER_MUTE)
+#define SOUND_MASK_ENHANCE	(1 << SOUND_MIXER_ENHANCE)
+#define SOUND_MASK_LOUD		(1 << SOUND_MIXER_LOUD)
+
+#define MIXER_READ(dev)		_SIOR('M', dev, int)
+#define SOUND_MIXER_READ_VOLUME		MIXER_READ(SOUND_MIXER_VOLUME)
+#define SOUND_MIXER_READ_BASS		MIXER_READ(SOUND_MIXER_BASS)
+#define SOUND_MIXER_READ_TREBLE		MIXER_READ(SOUND_MIXER_TREBLE)
+#define SOUND_MIXER_READ_SYNTH		MIXER_READ(SOUND_MIXER_SYNTH)
+#define SOUND_MIXER_READ_PCM		MIXER_READ(SOUND_MIXER_PCM)
+#define SOUND_MIXER_READ_SPEAKER	MIXER_READ(SOUND_MIXER_SPEAKER)
+#define SOUND_MIXER_READ_LINE		MIXER_READ(SOUND_MIXER_LINE)
+#define SOUND_MIXER_READ_MIC		MIXER_READ(SOUND_MIXER_MIC)
+#define SOUND_MIXER_READ_CD		MIXER_READ(SOUND_MIXER_CD)
+#define SOUND_MIXER_READ_IMIX		MIXER_READ(SOUND_MIXER_IMIX)
+#define SOUND_MIXER_READ_ALTPCM		MIXER_READ(SOUND_MIXER_ALTPCM)
+#define SOUND_MIXER_READ_RECLEV		MIXER_READ(SOUND_MIXER_RECLEV)
+#define SOUND_MIXER_READ_IGAIN		MIXER_READ(SOUND_MIXER_IGAIN)
+#define SOUND_MIXER_READ_OGAIN		MIXER_READ(SOUND_MIXER_OGAIN)
+#define SOUND_MIXER_READ_LINE1		MIXER_READ(SOUND_MIXER_LINE1)
+#define SOUND_MIXER_READ_LINE2		MIXER_READ(SOUND_MIXER_LINE2)
+#define SOUND_MIXER_READ_LINE3		MIXER_READ(SOUND_MIXER_LINE3)
+
+/* Obsolete macros */
+#define SOUND_MIXER_READ_MUTE		MIXER_READ(SOUND_MIXER_MUTE)
+#define SOUND_MIXER_READ_ENHANCE	MIXER_READ(SOUND_MIXER_ENHANCE)
+#define SOUND_MIXER_READ_LOUD		MIXER_READ(SOUND_MIXER_LOUD)
+
+#define SOUND_MIXER_READ_RECSRC		MIXER_READ(SOUND_MIXER_RECSRC)
+#define SOUND_MIXER_READ_DEVMASK	MIXER_READ(SOUND_MIXER_DEVMASK)
+#define SOUND_MIXER_READ_RECMASK	MIXER_READ(SOUND_MIXER_RECMASK)
+#define SOUND_MIXER_READ_STEREODEVS	MIXER_READ(SOUND_MIXER_STEREODEVS)
+#define SOUND_MIXER_READ_CAPS		MIXER_READ(SOUND_MIXER_CAPS)
+
+#define MIXER_WRITE(dev)		_SIOWR('M', dev, int)
+#define SOUND_MIXER_WRITE_VOLUME	MIXER_WRITE(SOUND_MIXER_VOLUME)
+#define SOUND_MIXER_WRITE_BASS		MIXER_WRITE(SOUND_MIXER_BASS)
+#define SOUND_MIXER_WRITE_TREBLE	MIXER_WRITE(SOUND_MIXER_TREBLE)
+#define SOUND_MIXER_WRITE_SYNTH		MIXER_WRITE(SOUND_MIXER_SYNTH)
+#define SOUND_MIXER_WRITE_PCM		MIXER_WRITE(SOUND_MIXER_PCM)
+#define SOUND_MIXER_WRITE_SPEAKER	MIXER_WRITE(SOUND_MIXER_SPEAKER)
+#define SOUND_MIXER_WRITE_LINE		MIXER_WRITE(SOUND_MIXER_LINE)
+#define SOUND_MIXER_WRITE_MIC		MIXER_WRITE(SOUND_MIXER_MIC)
+#define SOUND_MIXER_WRITE_CD		MIXER_WRITE(SOUND_MIXER_CD)
+#define SOUND_MIXER_WRITE_IMIX		MIXER_WRITE(SOUND_MIXER_IMIX)
+#define SOUND_MIXER_WRITE_ALTPCM	MIXER_WRITE(SOUND_MIXER_ALTPCM)
+#define SOUND_MIXER_WRITE_RECLEV	MIXER_WRITE(SOUND_MIXER_RECLEV)
+#define SOUND_MIXER_WRITE_IGAIN		MIXER_WRITE(SOUND_MIXER_IGAIN)
+#define SOUND_MIXER_WRITE_OGAIN		MIXER_WRITE(SOUND_MIXER_OGAIN)
+#define SOUND_MIXER_WRITE_LINE1		MIXER_WRITE(SOUND_MIXER_LINE1)
+#define SOUND_MIXER_WRITE_LINE2		MIXER_WRITE(SOUND_MIXER_LINE2)
+#define SOUND_MIXER_WRITE_LINE3		MIXER_WRITE(SOUND_MIXER_LINE3)
+
+/* Obsolete macros */
+#define SOUND_MIXER_WRITE_MUTE		MIXER_WRITE(SOUND_MIXER_MUTE)
+#define SOUND_MIXER_WRITE_ENHANCE	MIXER_WRITE(SOUND_MIXER_ENHANCE)
+#define SOUND_MIXER_WRITE_LOUD		MIXER_WRITE(SOUND_MIXER_LOUD)
+
+#define SOUND_MIXER_WRITE_RECSRC	MIXER_WRITE(SOUND_MIXER_RECSRC)
+
+typedef struct mixer_info
+{
+  char id[16];
+  char name[32];
+  int  modify_counter;
+  int fillers[10];
+} mixer_info;
+
+typedef struct _old_mixer_info /* Obsolete */
+{
+  char id[16];
+  char name[32];
+} _old_mixer_info;
+
+#define SOUND_MIXER_INFO		_SIOR ('M', 101, mixer_info)
+#define SOUND_OLD_MIXER_INFO		_SIOR ('M', 101, _old_mixer_info)
+
+/*
+ * A mechanism for accessing "proprietary" mixer features. This method
+ * permits passing 128 bytes of arbitrary data between a mixer application
+ * and the mixer driver. Interpretation of the record is defined by
+ * the particular mixer driver.
+ */
+typedef unsigned char mixer_record[128];
+
+#define SOUND_MIXER_ACCESS		_SIOWR('M', 102, mixer_record)
+
+/*
+ * Two ioctls for special souncard function
+ */
+#define SOUND_MIXER_AGC  _SIOWR('M', 103, int)
+#define SOUND_MIXER_3DSE  _SIOWR('M', 104, int)
+
+/*
+ * The SOUND_MIXER_PRIVATE# commands can be redefined by low level drivers.
+ * These features can be used when accessing device specific features.
+ */
+#define SOUND_MIXER_PRIVATE1		_SIOWR('M', 111, int)
+#define SOUND_MIXER_PRIVATE2		_SIOWR('M', 112, int)
+#define SOUND_MIXER_PRIVATE3		_SIOWR('M', 113, int)
+#define SOUND_MIXER_PRIVATE4		_SIOWR('M', 114, int)
+#define SOUND_MIXER_PRIVATE5		_SIOWR('M', 115, int)
+
+/*
+ * SOUND_MIXER_GETLEVELS and SOUND_MIXER_SETLEVELS calls can be used
+ * for querying current mixer settings from the driver and for loading
+ * default volume settings _prior_ activating the mixer (loading
+ * doesn't affect current state of the mixer hardware). These calls
+ * are for internal use only.
+ */
+
+typedef struct mixer_vol_table {
+  int num;	/* Index to volume table */
+  char name[32];
+  int levels[32];
+} mixer_vol_table;
+
+#define SOUND_MIXER_GETLEVELS		_SIOWR('M', 116, mixer_vol_table)
+#define SOUND_MIXER_SETLEVELS		_SIOWR('M', 117, mixer_vol_table)
+
+/* 
+ * An ioctl for identifying the driver version. It will return value
+ * of the SOUND_VERSION macro used when compiling the driver.
+ * This call was introduced in OSS version 3.6 and it will not work
+ * with earlier versions (returns EINVAL).
+ */
+#define OSS_GETVERSION			_SIOR ('M', 118, int)
+
+/*
+ * Level 2 event types for /dev/sequencer
+ */
+
+/*
+ * The 4 most significant bits of byte 0 specify the class of
+ * the event: 
+ *
+ *	0x8X = system level events,
+ *	0x9X = device/port specific events, event[1] = device/port,
+ *		The last 4 bits give the subtype:
+ *			0x02	= Channel event (event[3] = chn).
+ *			0x01	= note event (event[4] = note).
+ *			(0x01 is not used alone but always with bit 0x02).
+ *	       event[2] = MIDI message code (0x80=note off etc.)
+ *
+ */
+
+#define EV_SEQ_LOCAL		0x80
+#define EV_TIMING		0x81
+#define EV_CHN_COMMON		0x92
+#define EV_CHN_VOICE		0x93
+#define EV_SYSEX		0x94
+/*
+ * Event types 200 to 220 are reserved for application use.
+ * These numbers will not be used by the driver.
+ */
+
+/*
+ * Events for event type EV_CHN_VOICE
+ */
+
+#define MIDI_NOTEOFF		0x80
+#define MIDI_NOTEON		0x90
+#define MIDI_KEY_PRESSURE	0xA0
+
+/*
+ * Events for event type EV_CHN_COMMON
+ */
+
+#define MIDI_CTL_CHANGE		0xB0
+#define MIDI_PGM_CHANGE		0xC0
+#define MIDI_CHN_PRESSURE	0xD0
+#define MIDI_PITCH_BEND		0xE0
+
+#define MIDI_SYSTEM_PREFIX	0xF0
+
+/*
+ * Timer event types
+ */
+#define TMR_WAIT_REL		1	/* Time relative to the prev time */
+#define TMR_WAIT_ABS		2	/* Absolute time since TMR_START */
+#define TMR_STOP		3
+#define TMR_START		4
+#define TMR_CONTINUE		5
+#define TMR_TEMPO		6
+#define TMR_ECHO		8
+#define TMR_CLOCK		9	/* MIDI clock */
+#define TMR_SPP			10	/* Song position pointer */
+#define TMR_TIMESIG		11	/* Time signature */
+
+/*
+ *	Local event types
+ */
+#define LOCL_STARTAUDIO		1
+
+#if !defined(__KERNEL__) || defined(USE_SEQ_MACROS)
+/*
+ *	Some convenience macros to simplify programming of the
+ *	/dev/sequencer interface
+ *
+ *	This is a legacy interface for applications written against
+ *	the OSSlib-3.8 style interface. It is no longer possible
+ *	to actually link against OSSlib with this header, but we
+ *	still provide these macros for programs using them.
+ *
+ *	If you want to use OSSlib, it is recommended that you get
+ *	the GPL version of OSS-4.x and build against that version
+ *	of the header.
+ *
+ *	We redefine the extern keyword so that make headers_check
+ *	does not complain about SEQ_USE_EXTBUF.
+ */
+#define SEQ_DECLAREBUF()		SEQ_USE_EXTBUF()
+
+void seqbuf_dump(void);	/* This function must be provided by programs */
+
+#define SEQ_PM_DEFINES int __foo_bar___
+
+#define SEQ_LOAD_GMINSTR(dev, instr)
+#define SEQ_LOAD_GMDRUM(dev, drum)
+
+#define _SEQ_EXTERN extern
+#define SEQ_USE_EXTBUF() \
+		_SEQ_EXTERN unsigned char _seqbuf[]; \
+		_SEQ_EXTERN int _seqbuflen; _SEQ_EXTERN int _seqbufptr
+
+#ifndef USE_SIMPLE_MACROS
+/* Sample seqbuf_dump() implementation:
+ *
+ *	SEQ_DEFINEBUF (2048);	-- Defines a buffer for 2048 bytes
+ *
+ *	int seqfd;		-- The file descriptor for /dev/sequencer.
+ *
+ *	void
+ *	seqbuf_dump ()
+ *	{
+ *	  if (_seqbufptr)
+ *	    if (write (seqfd, _seqbuf, _seqbufptr) == -1)
+ *	      {
+ *		perror ("write /dev/sequencer");
+ *		exit (-1);
+ *	      }
+ *	  _seqbufptr = 0;
+ *	}
+ */
+
+#define SEQ_DEFINEBUF(len)		unsigned char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0
+#define _SEQ_NEEDBUF(len)		if ((_seqbufptr+(len)) > _seqbuflen) seqbuf_dump()
+#define _SEQ_ADVBUF(len)		_seqbufptr += len
+#define SEQ_DUMPBUF			seqbuf_dump
+#else
+/*
+ * This variation of the sequencer macros is used just to format one event
+ * using fixed buffer.
+ * 
+ * The program using the macro library must define the following macros before
+ * using this library.
+ *
+ * #define _seqbuf 		 name of the buffer (unsigned char[]) 
+ * #define _SEQ_ADVBUF(len)	 If the applic needs to know the exact
+ *				 size of the event, this macro can be used.
+ *				 Otherwise this must be defined as empty.
+ * #define _seqbufptr		 Define the name of index variable or 0 if
+ *				 not required. 
+ */
+#define _SEQ_NEEDBUF(len)	/* empty */
+#endif
+
+#define SEQ_VOLUME_MODE(dev, mode)	{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+					_seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\
+					_seqbuf[_seqbufptr+2] = (dev);\
+					_seqbuf[_seqbufptr+3] = (mode);\
+					_seqbuf[_seqbufptr+4] = 0;\
+					_seqbuf[_seqbufptr+5] = 0;\
+					_seqbuf[_seqbufptr+6] = 0;\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+
+/*
+ * Midi voice messages
+ */
+
+#define _CHN_VOICE(dev, event, chn, note, parm) \
+					{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_CHN_VOICE;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					_seqbuf[_seqbufptr+2] = (event);\
+					_seqbuf[_seqbufptr+3] = (chn);\
+					_seqbuf[_seqbufptr+4] = (note);\
+					_seqbuf[_seqbufptr+5] = (parm);\
+					_seqbuf[_seqbufptr+6] = (0);\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_START_NOTE(dev, chn, note, vol) \
+		_CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol)
+
+#define SEQ_STOP_NOTE(dev, chn, note, vol) \
+		_CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol)
+
+#define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \
+		_CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure)
+
+/*
+ * Midi channel messages
+ */
+
+#define _CHN_COMMON(dev, event, chn, p1, p2, w14) \
+					{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_CHN_COMMON;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					_seqbuf[_seqbufptr+2] = (event);\
+					_seqbuf[_seqbufptr+3] = (chn);\
+					_seqbuf[_seqbufptr+4] = (p1);\
+					_seqbuf[_seqbufptr+5] = (p2);\
+					*(short *)&_seqbuf[_seqbufptr+6] = (w14);\
+					_SEQ_ADVBUF(8);}
+/*
+ * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits
+ * sending any MIDI bytes but it's absolutely not possible. Trying to do
+ * so _will_ cause problems with MPU401 intelligent mode).
+ *
+ * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be 
+ * sent by calling SEQ_SYSEX() several times (there must be no other events
+ * between them). First sysex fragment must have 0xf0 in the first byte
+ * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte
+ * between these sysex start and end markers cannot be larger than 0x7f. Also
+ * lengths of each fragments (except the last one) must be 6.
+ *
+ * Breaking the above rules may work with some MIDI ports but is likely to
+ * cause fatal problems with some other devices (such as MPU401).
+ */
+#define SEQ_SYSEX(dev, buf, len) \
+					{int ii, ll=(len); \
+					 unsigned char *bufp=buf;\
+					 if (ll>6)ll=6;\
+					_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = EV_SYSEX;\
+					_seqbuf[_seqbufptr+1] = (dev);\
+					for(ii=0;ii<ll;ii++)\
+					   _seqbuf[_seqbufptr+ii+2] = bufp[ii];\
+					for(ii=ll;ii<6;ii++)\
+					   _seqbuf[_seqbufptr+ii+2] = 0xff;\
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_CHN_PRESSURE(dev, chn, pressure) \
+		_CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0)
+
+#define SEQ_SET_PATCH SEQ_PGM_CHANGE
+#define SEQ_PGM_CHANGE(dev, chn, patch) \
+		_CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0)
+
+#define SEQ_CONTROL(dev, chn, controller, value) \
+		_CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value)
+
+#define SEQ_BENDER(dev, chn, value) \
+		_CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value)
+
+
+#define SEQ_V2_X_CONTROL(dev, voice, controller, value)	{_SEQ_NEEDBUF(8);\
+					_seqbuf[_seqbufptr] = SEQ_EXTENDED;\
+					_seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\
+					_seqbuf[_seqbufptr+2] = (dev);\
+					_seqbuf[_seqbufptr+3] = (voice);\
+					_seqbuf[_seqbufptr+4] = (controller);\
+					_seqbuf[_seqbufptr+5] = ((value)&0xff);\
+					_seqbuf[_seqbufptr+6] = ((value>>8)&0xff);\
+					_seqbuf[_seqbufptr+7] = 0;\
+					_SEQ_ADVBUF(8);}
+/*
+ * The following 5 macros are incorrectly implemented and obsolete.
+ * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead.
+ */
+#define SEQ_PITCHBEND(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value)
+#define SEQ_BENDER_RANGE(dev, voice, value) SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value)
+#define SEQ_EXPRESSION(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128)
+#define SEQ_MAIN_VOLUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100)
+#define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2)
+
+/*
+ * Timing and synchronization macros
+ */
+
+#define _TIMER_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
+				 	_seqbuf[_seqbufptr+0] = EV_TIMING; \
+				 	_seqbuf[_seqbufptr+1] = (ev); \
+					_seqbuf[_seqbufptr+2] = 0;\
+					_seqbuf[_seqbufptr+3] = 0;\
+				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_START_TIMER()		_TIMER_EVENT(TMR_START, 0)
+#define SEQ_STOP_TIMER()		_TIMER_EVENT(TMR_STOP, 0)
+#define SEQ_CONTINUE_TIMER()		_TIMER_EVENT(TMR_CONTINUE, 0)
+#define SEQ_WAIT_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_ABS, ticks)
+#define SEQ_DELTA_TIME(ticks)		_TIMER_EVENT(TMR_WAIT_REL, ticks)
+#define SEQ_ECHO_BACK(key)		_TIMER_EVENT(TMR_ECHO, key)
+#define SEQ_SET_TEMPO(value)		_TIMER_EVENT(TMR_TEMPO, value)
+#define SEQ_SONGPOS(pos)		_TIMER_EVENT(TMR_SPP, pos)
+#define SEQ_TIME_SIGNATURE(sig)		_TIMER_EVENT(TMR_TIMESIG, sig)
+
+/*
+ * Local control events
+ */
+
+#define _LOCAL_EVENT(ev, parm)		{_SEQ_NEEDBUF(8);\
+				 	_seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \
+				 	_seqbuf[_seqbufptr+1] = (ev); \
+					_seqbuf[_seqbufptr+2] = 0;\
+					_seqbuf[_seqbufptr+3] = 0;\
+				 	*(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \
+					_SEQ_ADVBUF(8);}
+
+#define SEQ_PLAYAUDIO(devmask)		_LOCAL_EVENT(LOCL_STARTAUDIO, devmask)
+/*
+ * Events for the level 1 interface only 
+ */
+
+#define SEQ_MIDIOUT(device, byte)	{_SEQ_NEEDBUF(4);\
+					_seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\
+					_seqbuf[_seqbufptr+1] = (byte);\
+					_seqbuf[_seqbufptr+2] = (device);\
+					_seqbuf[_seqbufptr+3] = 0;\
+					_SEQ_ADVBUF(4);}
+
+/*
+ * Patch loading.
+ */
+#define SEQ_WRPATCH(patchx, len) \
+		{if (_seqbufptr) SEQ_DUMPBUF();\
+		 if (write(seqfd, (char*)(patchx), len)==-1) \
+		    perror("Write patch: /dev/sequencer");}
+#define SEQ_WRPATCH2(patchx, len) \
+		(SEQ_DUMPBUF(), write(seqfd, (char*)(patchx), len))
+
+#endif
+#endif /* _UAPISOUNDCARD_H */
diff --git a/include/uapi/linux/spi/Kbuild b/include/uapi/linux/spi/Kbuild
index aafaa5a..0cc747e 100644
--- a/include/uapi/linux/spi/Kbuild
+++ b/include/uapi/linux/spi/Kbuild
@@ -1 +1,2 @@
 # UAPI Header export list
+header-y += spidev.h
diff --git a/include/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h
similarity index 100%
rename from include/linux/spi/spidev.h
rename to include/uapi/linux/spi/spidev.h
diff --git a/include/uapi/linux/stat.h b/include/uapi/linux/stat.h
new file mode 100644
index 0000000..7fec7e3
--- /dev/null
+++ b/include/uapi/linux/stat.h
@@ -0,0 +1,45 @@
+#ifndef _UAPI_LINUX_STAT_H
+#define _UAPI_LINUX_STAT_H
+
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#define S_IFMT  00170000
+#define S_IFSOCK 0140000
+#define S_IFLNK	 0120000
+#define S_IFREG  0100000
+#define S_IFBLK  0060000
+#define S_IFDIR  0040000
+#define S_IFCHR  0020000
+#define S_IFIFO  0010000
+#define S_ISUID  0004000
+#define S_ISGID  0002000
+#define S_ISVTX  0001000
+
+#define S_ISLNK(m)	(((m) & S_IFMT) == S_IFLNK)
+#define S_ISREG(m)	(((m) & S_IFMT) == S_IFREG)
+#define S_ISDIR(m)	(((m) & S_IFMT) == S_IFDIR)
+#define S_ISCHR(m)	(((m) & S_IFMT) == S_IFCHR)
+#define S_ISBLK(m)	(((m) & S_IFMT) == S_IFBLK)
+#define S_ISFIFO(m)	(((m) & S_IFMT) == S_IFIFO)
+#define S_ISSOCK(m)	(((m) & S_IFMT) == S_IFSOCK)
+
+#define S_IRWXU 00700
+#define S_IRUSR 00400
+#define S_IWUSR 00200
+#define S_IXUSR 00100
+
+#define S_IRWXG 00070
+#define S_IRGRP 00040
+#define S_IWGRP 00020
+#define S_IXGRP 00010
+
+#define S_IRWXO 00007
+#define S_IROTH 00004
+#define S_IWOTH 00002
+#define S_IXOTH 00001
+
+#endif
+
+
+#endif /* _UAPI_LINUX_STAT_H */
diff --git a/include/uapi/linux/stddef.h b/include/uapi/linux/stddef.h
new file mode 100644
index 0000000..aa9f104
--- /dev/null
+++ b/include/uapi/linux/stddef.h
@@ -0,0 +1 @@
+#include <linux/compiler.h>
diff --git a/include/uapi/linux/string.h b/include/uapi/linux/string.h
new file mode 100644
index 0000000..e32e545
--- /dev/null
+++ b/include/uapi/linux/string.h
@@ -0,0 +1,9 @@
+#ifndef _UAPI_LINUX_STRING_H_
+#define _UAPI_LINUX_STRING_H_
+
+/* We don't want strings.h stuff being used by user stuff by accident */
+
+#ifndef __KERNEL__
+#include <string.h>
+#endif /* __KERNEL__ */
+#endif /* _UAPI_LINUX_STRING_H_ */
diff --git a/include/uapi/linux/sunrpc/Kbuild b/include/uapi/linux/sunrpc/Kbuild
index aafaa5a..8e02e47 100644
--- a/include/uapi/linux/sunrpc/Kbuild
+++ b/include/uapi/linux/sunrpc/Kbuild
@@ -1 +1,2 @@
 # UAPI Header export list
+header-y += debug.h
diff --git a/include/uapi/linux/sunrpc/debug.h b/include/uapi/linux/sunrpc/debug.h
new file mode 100644
index 0000000..830e344
--- /dev/null
+++ b/include/uapi/linux/sunrpc/debug.h
@@ -0,0 +1,48 @@
+/*
+ * linux/include/linux/sunrpc/debug.h
+ *
+ * Debugging support for sunrpc module
+ *
+ * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
+ */
+
+#ifndef _UAPI_LINUX_SUNRPC_DEBUG_H_
+#define _UAPI_LINUX_SUNRPC_DEBUG_H_
+
+/*
+ * RPC debug facilities
+ */
+#define RPCDBG_XPRT		0x0001
+#define RPCDBG_CALL		0x0002
+#define RPCDBG_DEBUG		0x0004
+#define RPCDBG_NFS		0x0008
+#define RPCDBG_AUTH		0x0010
+#define RPCDBG_BIND		0x0020
+#define RPCDBG_SCHED		0x0040
+#define RPCDBG_TRANS		0x0080
+#define RPCDBG_SVCXPRT		0x0100
+#define RPCDBG_SVCDSP		0x0200
+#define RPCDBG_MISC		0x0400
+#define RPCDBG_CACHE		0x0800
+#define RPCDBG_ALL		0x7fff
+
+
+/*
+ * Declarations for the sysctl debug interface, which allows to read or
+ * change the debug flags for rpc, nfs, nfsd, and lockd. Since the sunrpc
+ * module currently registers its sysctl table dynamically, the sysctl path
+ * for module FOO is <CTL_SUNRPC, CTL_FOODEBUG>.
+ */
+
+enum {
+	CTL_RPCDEBUG = 1,
+	CTL_NFSDEBUG,
+	CTL_NFSDDEBUG,
+	CTL_NLMDEBUG,
+	CTL_SLOTTABLE_UDP,
+	CTL_SLOTTABLE_TCP,
+	CTL_MIN_RESVPORT,
+	CTL_MAX_RESVPORT,
+};
+
+#endif /* _UAPI_LINUX_SUNRPC_DEBUG_H_ */
diff --git a/include/linux/suspend_ioctls.h b/include/uapi/linux/suspend_ioctls.h
similarity index 100%
rename from include/linux/suspend_ioctls.h
rename to include/uapi/linux/suspend_ioctls.h
diff --git a/include/uapi/linux/swab.h b/include/uapi/linux/swab.h
new file mode 100644
index 0000000..e811474
--- /dev/null
+++ b/include/uapi/linux/swab.h
@@ -0,0 +1,282 @@
+#ifndef _UAPI_LINUX_SWAB_H
+#define _UAPI_LINUX_SWAB_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/swab.h>
+
+/*
+ * casts are necessary for constants, because we never know how for sure
+ * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way.
+ */
+#define ___constant_swab16(x) ((__u16)(				\
+	(((__u16)(x) & (__u16)0x00ffU) << 8) |			\
+	(((__u16)(x) & (__u16)0xff00U) >> 8)))
+
+#define ___constant_swab32(x) ((__u32)(				\
+	(((__u32)(x) & (__u32)0x000000ffUL) << 24) |		\
+	(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |		\
+	(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |		\
+	(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
+
+#define ___constant_swab64(x) ((__u64)(				\
+	(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) |	\
+	(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) |	\
+	(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) |	\
+	(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) |	\
+	(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) |	\
+	(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) |	\
+	(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) |	\
+	(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
+
+#define ___constant_swahw32(x) ((__u32)(			\
+	(((__u32)(x) & (__u32)0x0000ffffUL) << 16) |		\
+	(((__u32)(x) & (__u32)0xffff0000UL) >> 16)))
+
+#define ___constant_swahb32(x) ((__u32)(			\
+	(((__u32)(x) & (__u32)0x00ff00ffUL) << 8) |		\
+	(((__u32)(x) & (__u32)0xff00ff00UL) >> 8)))
+
+/*
+ * Implement the following as inlines, but define the interface using
+ * macros to allow constant folding when possible:
+ * ___swab16, ___swab32, ___swab64, ___swahw32, ___swahb32
+ */
+
+static inline __attribute_const__ __u16 __fswab16(__u16 val)
+{
+#ifdef __arch_swab16
+	return __arch_swab16(val);
+#else
+	return ___constant_swab16(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswab32(__u32 val)
+{
+#ifdef __arch_swab32
+	return __arch_swab32(val);
+#else
+	return ___constant_swab32(val);
+#endif
+}
+
+static inline __attribute_const__ __u64 __fswab64(__u64 val)
+{
+#ifdef __arch_swab64
+	return __arch_swab64(val);
+#elif defined(__SWAB_64_THRU_32__)
+	__u32 h = val >> 32;
+	__u32 l = val & ((1ULL << 32) - 1);
+	return (((__u64)__fswab32(l)) << 32) | ((__u64)(__fswab32(h)));
+#else
+	return ___constant_swab64(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswahw32(__u32 val)
+{
+#ifdef __arch_swahw32
+	return __arch_swahw32(val);
+#else
+	return ___constant_swahw32(val);
+#endif
+}
+
+static inline __attribute_const__ __u32 __fswahb32(__u32 val)
+{
+#ifdef __arch_swahb32
+	return __arch_swahb32(val);
+#else
+	return ___constant_swahb32(val);
+#endif
+}
+
+/**
+ * __swab16 - return a byteswapped 16-bit value
+ * @x: value to byteswap
+ */
+#define __swab16(x)				\
+	(__builtin_constant_p((__u16)(x)) ?	\
+	___constant_swab16(x) :			\
+	__fswab16(x))
+
+/**
+ * __swab32 - return a byteswapped 32-bit value
+ * @x: value to byteswap
+ */
+#define __swab32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swab32(x) :			\
+	__fswab32(x))
+
+/**
+ * __swab64 - return a byteswapped 64-bit value
+ * @x: value to byteswap
+ */
+#define __swab64(x)				\
+	(__builtin_constant_p((__u64)(x)) ?	\
+	___constant_swab64(x) :			\
+	__fswab64(x))
+
+/**
+ * __swahw32 - return a word-swapped 32-bit value
+ * @x: value to wordswap
+ *
+ * __swahw32(0x12340000) is 0x00001234
+ */
+#define __swahw32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swahw32(x) :		\
+	__fswahw32(x))
+
+/**
+ * __swahb32 - return a high and low byte-swapped 32-bit value
+ * @x: value to byteswap
+ *
+ * __swahb32(0x12345678) is 0x34127856
+ */
+#define __swahb32(x)				\
+	(__builtin_constant_p((__u32)(x)) ?	\
+	___constant_swahb32(x) :		\
+	__fswahb32(x))
+
+/**
+ * __swab16p - return a byteswapped 16-bit value from a pointer
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline __u16 __swab16p(const __u16 *p)
+{
+#ifdef __arch_swab16p
+	return __arch_swab16p(p);
+#else
+	return __swab16(*p);
+#endif
+}
+
+/**
+ * __swab32p - return a byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline __u32 __swab32p(const __u32 *p)
+{
+#ifdef __arch_swab32p
+	return __arch_swab32p(p);
+#else
+	return __swab32(*p);
+#endif
+}
+
+/**
+ * __swab64p - return a byteswapped 64-bit value from a pointer
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline __u64 __swab64p(const __u64 *p)
+{
+#ifdef __arch_swab64p
+	return __arch_swab64p(p);
+#else
+	return __swab64(*p);
+#endif
+}
+
+/**
+ * __swahw32p - return a wordswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping.
+ */
+static inline __u32 __swahw32p(const __u32 *p)
+{
+#ifdef __arch_swahw32p
+	return __arch_swahw32p(p);
+#else
+	return __swahw32(*p);
+#endif
+}
+
+/**
+ * __swahb32p - return a high and low byteswapped 32-bit value from a pointer
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high/low byteswapping.
+ */
+static inline __u32 __swahb32p(const __u32 *p)
+{
+#ifdef __arch_swahb32p
+	return __arch_swahb32p(p);
+#else
+	return __swahb32(*p);
+#endif
+}
+
+/**
+ * __swab16s - byteswap a 16-bit value in-place
+ * @p: pointer to a naturally-aligned 16-bit value
+ */
+static inline void __swab16s(__u16 *p)
+{
+#ifdef __arch_swab16s
+	__arch_swab16s(p);
+#else
+	*p = __swab16p(p);
+#endif
+}
+/**
+ * __swab32s - byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ */
+static inline void __swab32s(__u32 *p)
+{
+#ifdef __arch_swab32s
+	__arch_swab32s(p);
+#else
+	*p = __swab32p(p);
+#endif
+}
+
+/**
+ * __swab64s - byteswap a 64-bit value in-place
+ * @p: pointer to a naturally-aligned 64-bit value
+ */
+static inline void __swab64s(__u64 *p)
+{
+#ifdef __arch_swab64s
+	__arch_swab64s(p);
+#else
+	*p = __swab64p(p);
+#endif
+}
+
+/**
+ * __swahw32s - wordswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahw32() for details of wordswapping
+ */
+static inline void __swahw32s(__u32 *p)
+{
+#ifdef __arch_swahw32s
+	__arch_swahw32s(p);
+#else
+	*p = __swahw32p(p);
+#endif
+}
+
+/**
+ * __swahb32s - high and low byteswap a 32-bit value in-place
+ * @p: pointer to a naturally-aligned 32-bit value
+ *
+ * See __swahb32() for details of high and low byte swapping
+ */
+static inline void __swahb32s(__u32 *p)
+{
+#ifdef __arch_swahb32s
+	__arch_swahb32s(p);
+#else
+	*p = __swahb32p(p);
+#endif
+}
+
+
+#endif /* _UAPI_LINUX_SWAB_H */
diff --git a/include/uapi/linux/synclink.h b/include/uapi/linux/synclink.h
new file mode 100644
index 0000000..7dcb065
--- /dev/null
+++ b/include/uapi/linux/synclink.h
@@ -0,0 +1,300 @@
+/*
+ * SyncLink Multiprotocol Serial Adapter Driver
+ *
+ * $Id: synclink.h,v 3.14 2006/07/17 20:15:43 paulkf Exp $
+ *
+ * Copyright (C) 1998-2000 by Microgate Corporation
+ *
+ * Redistribution of this file is permitted under
+ * the terms of the GNU Public License (GPL)
+ */
+
+#ifndef _UAPI_SYNCLINK_H_
+#define _UAPI_SYNCLINK_H_
+#define SYNCLINK_H_VERSION 3.6
+
+#include <linux/types.h>
+
+#define BIT0	0x0001
+#define BIT1	0x0002
+#define BIT2	0x0004
+#define BIT3	0x0008
+#define BIT4	0x0010
+#define BIT5	0x0020
+#define BIT6	0x0040
+#define BIT7	0x0080
+#define BIT8	0x0100
+#define BIT9	0x0200
+#define BIT10	0x0400
+#define BIT11	0x0800
+#define BIT12	0x1000
+#define BIT13	0x2000
+#define BIT14	0x4000
+#define BIT15	0x8000
+#define BIT16	0x00010000
+#define BIT17	0x00020000
+#define BIT18	0x00040000
+#define BIT19	0x00080000
+#define BIT20	0x00100000
+#define BIT21	0x00200000
+#define BIT22	0x00400000
+#define BIT23	0x00800000
+#define BIT24	0x01000000
+#define BIT25	0x02000000
+#define BIT26	0x04000000
+#define BIT27	0x08000000
+#define BIT28	0x10000000
+#define BIT29	0x20000000
+#define BIT30	0x40000000
+#define BIT31	0x80000000
+
+
+#define HDLC_MAX_FRAME_SIZE	65535
+#define MAX_ASYNC_TRANSMIT	4096
+#define MAX_ASYNC_BUFFER_SIZE	4096
+
+#define ASYNC_PARITY_NONE		0
+#define ASYNC_PARITY_EVEN		1
+#define ASYNC_PARITY_ODD		2
+#define ASYNC_PARITY_SPACE		3
+
+#define HDLC_FLAG_UNDERRUN_ABORT7	0x0000
+#define HDLC_FLAG_UNDERRUN_ABORT15	0x0001
+#define HDLC_FLAG_UNDERRUN_FLAG		0x0002
+#define HDLC_FLAG_UNDERRUN_CRC		0x0004
+#define HDLC_FLAG_SHARE_ZERO		0x0010
+#define HDLC_FLAG_AUTO_CTS		0x0020
+#define HDLC_FLAG_AUTO_DCD		0x0040
+#define HDLC_FLAG_AUTO_RTS		0x0080
+#define HDLC_FLAG_RXC_DPLL		0x0100
+#define HDLC_FLAG_RXC_BRG		0x0200
+#define HDLC_FLAG_RXC_TXCPIN		0x8000
+#define HDLC_FLAG_RXC_RXCPIN		0x0000
+#define HDLC_FLAG_TXC_DPLL		0x0400
+#define HDLC_FLAG_TXC_BRG		0x0800
+#define HDLC_FLAG_TXC_TXCPIN		0x0000
+#define HDLC_FLAG_TXC_RXCPIN		0x0008
+#define HDLC_FLAG_DPLL_DIV8		0x1000
+#define HDLC_FLAG_DPLL_DIV16		0x2000
+#define HDLC_FLAG_DPLL_DIV32		0x0000
+#define HDLC_FLAG_HDLC_LOOPMODE		0x4000
+
+#define HDLC_CRC_NONE			0
+#define HDLC_CRC_16_CCITT		1
+#define HDLC_CRC_32_CCITT		2
+#define HDLC_CRC_MASK			0x00ff
+#define HDLC_CRC_RETURN_EX		0x8000
+
+#define RX_OK				0
+#define RX_CRC_ERROR			1
+
+#define HDLC_TXIDLE_FLAGS		0
+#define HDLC_TXIDLE_ALT_ZEROS_ONES	1
+#define HDLC_TXIDLE_ZEROS		2
+#define HDLC_TXIDLE_ONES		3
+#define HDLC_TXIDLE_ALT_MARK_SPACE	4
+#define HDLC_TXIDLE_SPACE		5
+#define HDLC_TXIDLE_MARK		6
+#define HDLC_TXIDLE_CUSTOM_8            0x10000000
+#define HDLC_TXIDLE_CUSTOM_16           0x20000000
+
+#define HDLC_ENCODING_NRZ			0
+#define HDLC_ENCODING_NRZB			1
+#define HDLC_ENCODING_NRZI_MARK			2
+#define HDLC_ENCODING_NRZI_SPACE		3
+#define HDLC_ENCODING_NRZI			HDLC_ENCODING_NRZI_SPACE
+#define HDLC_ENCODING_BIPHASE_MARK		4
+#define HDLC_ENCODING_BIPHASE_SPACE		5
+#define HDLC_ENCODING_BIPHASE_LEVEL		6
+#define HDLC_ENCODING_DIFF_BIPHASE_LEVEL	7
+
+#define HDLC_PREAMBLE_LENGTH_8BITS	0
+#define HDLC_PREAMBLE_LENGTH_16BITS	1
+#define HDLC_PREAMBLE_LENGTH_32BITS	2
+#define HDLC_PREAMBLE_LENGTH_64BITS	3
+
+#define HDLC_PREAMBLE_PATTERN_NONE	0
+#define HDLC_PREAMBLE_PATTERN_ZEROS	1
+#define HDLC_PREAMBLE_PATTERN_FLAGS	2
+#define HDLC_PREAMBLE_PATTERN_10	3
+#define HDLC_PREAMBLE_PATTERN_01	4
+#define HDLC_PREAMBLE_PATTERN_ONES	5
+
+#define MGSL_MODE_ASYNC		1
+#define MGSL_MODE_HDLC		2
+#define MGSL_MODE_MONOSYNC	3
+#define MGSL_MODE_BISYNC	4
+#define MGSL_MODE_RAW		6
+#define MGSL_MODE_BASE_CLOCK    7
+#define MGSL_MODE_XSYNC         8
+
+#define MGSL_BUS_TYPE_ISA	1
+#define MGSL_BUS_TYPE_EISA	2
+#define MGSL_BUS_TYPE_PCI	5
+
+#define MGSL_INTERFACE_MASK     0xf
+#define MGSL_INTERFACE_DISABLE  0
+#define MGSL_INTERFACE_RS232    1
+#define MGSL_INTERFACE_V35      2
+#define MGSL_INTERFACE_RS422    3
+#define MGSL_INTERFACE_RTS_EN   0x10
+#define MGSL_INTERFACE_LL       0x20
+#define MGSL_INTERFACE_RL       0x40
+#define MGSL_INTERFACE_MSB_FIRST 0x80
+
+typedef struct _MGSL_PARAMS
+{
+	/* Common */
+
+	unsigned long	mode;		/* Asynchronous or HDLC */
+	unsigned char	loopback;	/* internal loopback mode */
+
+	/* HDLC Only */
+
+	unsigned short	flags;
+	unsigned char	encoding;	/* NRZ, NRZI, etc. */
+	unsigned long	clock_speed;	/* external clock speed in bits per second */
+	unsigned char	addr_filter;	/* receive HDLC address filter, 0xFF = disable */
+	unsigned short	crc_type;	/* None, CRC16-CCITT, or CRC32-CCITT */
+	unsigned char	preamble_length;
+	unsigned char	preamble;
+
+	/* Async Only */
+
+	unsigned long	data_rate;	/* bits per second */
+	unsigned char	data_bits;	/* 7 or 8 data bits */
+	unsigned char	stop_bits;	/* 1 or 2 stop bits */
+	unsigned char	parity;		/* none, even, or odd */
+
+} MGSL_PARAMS, *PMGSL_PARAMS;
+
+#define MICROGATE_VENDOR_ID 0x13c0
+#define SYNCLINK_DEVICE_ID 0x0010
+#define MGSCC_DEVICE_ID 0x0020
+#define SYNCLINK_SCA_DEVICE_ID 0x0030
+#define SYNCLINK_GT_DEVICE_ID 0x0070
+#define SYNCLINK_GT4_DEVICE_ID 0x0080
+#define SYNCLINK_AC_DEVICE_ID  0x0090
+#define SYNCLINK_GT2_DEVICE_ID 0x00A0
+#define MGSL_MAX_SERIAL_NUMBER 30
+
+/*
+** device diagnostics status
+*/
+
+#define DiagStatus_OK				0
+#define DiagStatus_AddressFailure		1
+#define DiagStatus_AddressConflict		2
+#define DiagStatus_IrqFailure			3
+#define DiagStatus_IrqConflict			4
+#define DiagStatus_DmaFailure			5
+#define DiagStatus_DmaConflict			6
+#define DiagStatus_PciAdapterNotFound		7
+#define DiagStatus_CantAssignPciResources	8
+#define DiagStatus_CantAssignPciMemAddr		9
+#define DiagStatus_CantAssignPciIoAddr		10
+#define DiagStatus_CantAssignPciIrq		11
+#define DiagStatus_MemoryError			12
+
+#define SerialSignal_DCD            0x01     /* Data Carrier Detect */
+#define SerialSignal_TXD            0x02     /* Transmit Data */
+#define SerialSignal_RI             0x04     /* Ring Indicator */
+#define SerialSignal_RXD            0x08     /* Receive Data */
+#define SerialSignal_CTS            0x10     /* Clear to Send */
+#define SerialSignal_RTS            0x20     /* Request to Send */
+#define SerialSignal_DSR            0x40     /* Data Set Ready */
+#define SerialSignal_DTR            0x80     /* Data Terminal Ready */
+
+
+/*
+ * Counters of the input lines (CTS, DSR, RI, CD) interrupts
+ */
+struct mgsl_icount {
+	__u32	cts, dsr, rng, dcd, tx, rx;
+	__u32	frame, parity, overrun, brk;
+	__u32	buf_overrun;
+	__u32	txok;
+	__u32	txunder;
+	__u32	txabort;
+	__u32	txtimeout;
+	__u32	rxshort;
+	__u32	rxlong;
+	__u32	rxabort;
+	__u32	rxover;
+	__u32	rxcrc;
+	__u32	rxok;
+	__u32	exithunt;
+	__u32	rxidle;
+};
+
+struct gpio_desc {
+	__u32 state;
+	__u32 smask;
+	__u32 dir;
+	__u32 dmask;
+};
+
+#define DEBUG_LEVEL_DATA	1
+#define DEBUG_LEVEL_ERROR 	2
+#define DEBUG_LEVEL_INFO  	3
+#define DEBUG_LEVEL_BH    	4
+#define DEBUG_LEVEL_ISR		5
+
+/*
+** Event bit flags for use with MgslWaitEvent
+*/
+
+#define MgslEvent_DsrActive	0x0001
+#define MgslEvent_DsrInactive	0x0002
+#define MgslEvent_Dsr		0x0003
+#define MgslEvent_CtsActive	0x0004
+#define MgslEvent_CtsInactive	0x0008
+#define MgslEvent_Cts		0x000c
+#define MgslEvent_DcdActive	0x0010
+#define MgslEvent_DcdInactive	0x0020
+#define MgslEvent_Dcd		0x0030
+#define MgslEvent_RiActive	0x0040
+#define MgslEvent_RiInactive	0x0080
+#define MgslEvent_Ri		0x00c0
+#define MgslEvent_ExitHuntMode	0x0100
+#define MgslEvent_IdleReceived	0x0200
+
+/* Private IOCTL codes:
+ *
+ * MGSL_IOCSPARAMS	set MGSL_PARAMS structure values
+ * MGSL_IOCGPARAMS	get current MGSL_PARAMS structure values
+ * MGSL_IOCSTXIDLE	set current transmit idle mode
+ * MGSL_IOCGTXIDLE	get current transmit idle mode
+ * MGSL_IOCTXENABLE	enable or disable transmitter
+ * MGSL_IOCRXENABLE	enable or disable receiver
+ * MGSL_IOCTXABORT	abort transmitting frame (HDLC)
+ * MGSL_IOCGSTATS	return current statistics
+ * MGSL_IOCWAITEVENT	wait for specified event to occur
+ * MGSL_LOOPTXDONE	transmit in HDLC LoopMode done
+ * MGSL_IOCSIF          set the serial interface type
+ * MGSL_IOCGIF          get the serial interface type
+ */
+#define MGSL_MAGIC_IOC	'm'
+#define MGSL_IOCSPARAMS		_IOW(MGSL_MAGIC_IOC,0,struct _MGSL_PARAMS)
+#define MGSL_IOCGPARAMS		_IOR(MGSL_MAGIC_IOC,1,struct _MGSL_PARAMS)
+#define MGSL_IOCSTXIDLE		_IO(MGSL_MAGIC_IOC,2)
+#define MGSL_IOCGTXIDLE		_IO(MGSL_MAGIC_IOC,3)
+#define MGSL_IOCTXENABLE	_IO(MGSL_MAGIC_IOC,4)
+#define MGSL_IOCRXENABLE	_IO(MGSL_MAGIC_IOC,5)
+#define MGSL_IOCTXABORT		_IO(MGSL_MAGIC_IOC,6)
+#define MGSL_IOCGSTATS		_IO(MGSL_MAGIC_IOC,7)
+#define MGSL_IOCWAITEVENT	_IOWR(MGSL_MAGIC_IOC,8,int)
+#define MGSL_IOCCLRMODCOUNT	_IO(MGSL_MAGIC_IOC,15)
+#define MGSL_IOCLOOPTXDONE	_IO(MGSL_MAGIC_IOC,9)
+#define MGSL_IOCSIF		_IO(MGSL_MAGIC_IOC,10)
+#define MGSL_IOCGIF		_IO(MGSL_MAGIC_IOC,11)
+#define MGSL_IOCSGPIO		_IOW(MGSL_MAGIC_IOC,16,struct gpio_desc)
+#define MGSL_IOCGGPIO		_IOR(MGSL_MAGIC_IOC,17,struct gpio_desc)
+#define MGSL_IOCWAITGPIO	_IOWR(MGSL_MAGIC_IOC,18,struct gpio_desc)
+#define MGSL_IOCSXSYNC		_IO(MGSL_MAGIC_IOC, 19)
+#define MGSL_IOCGXSYNC		_IO(MGSL_MAGIC_IOC, 20)
+#define MGSL_IOCSXCTRL		_IO(MGSL_MAGIC_IOC, 21)
+#define MGSL_IOCGXCTRL		_IO(MGSL_MAGIC_IOC, 22)
+
+
+#endif /* _UAPI_SYNCLINK_H_ */
diff --git a/include/uapi/linux/sysctl.h b/include/uapi/linux/sysctl.h
new file mode 100644
index 0000000..6d67213
--- /dev/null
+++ b/include/uapi/linux/sysctl.h
@@ -0,0 +1,932 @@
+/*
+ * sysctl.h: General linux system control interface
+ *
+ * Begun 24 March 1995, Stephen Tweedie
+ *
+ ****************************************************************
+ ****************************************************************
+ **
+ **  WARNING:
+ **  The values in this file are exported to user space via 
+ **  the sysctl() binary interface.  Do *NOT* change the
+ **  numbering of any existing values here, and do not change
+ **  any numbers within any one set of values.  If you have to
+ **  redefine an existing interface, use a new number for it.
+ **  The kernel will then return -ENOTDIR to any application using
+ **  the old binary interface.
+ **
+ ****************************************************************
+ ****************************************************************
+ */
+
+#ifndef _UAPI_LINUX_SYSCTL_H
+#define _UAPI_LINUX_SYSCTL_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+struct completion;
+
+#define CTL_MAXNAME 10		/* how many path components do we allow in a
+				   call to sysctl?   In other words, what is
+				   the largest acceptable value for the nlen
+				   member of a struct __sysctl_args to have? */
+
+struct __sysctl_args {
+	int __user *name;
+	int nlen;
+	void __user *oldval;
+	size_t __user *oldlenp;
+	void __user *newval;
+	size_t newlen;
+	unsigned long __unused[4];
+};
+
+/* Define sysctl names first */
+
+/* Top-level names: */
+
+enum
+{
+	CTL_KERN=1,		/* General kernel info and control */
+	CTL_VM=2,		/* VM management */
+	CTL_NET=3,		/* Networking */
+	CTL_PROC=4,		/* removal breaks strace(1) compilation */
+	CTL_FS=5,		/* Filesystems */
+	CTL_DEBUG=6,		/* Debugging */
+	CTL_DEV=7,		/* Devices */
+	CTL_BUS=8,		/* Busses */
+	CTL_ABI=9,		/* Binary emulation */
+	CTL_CPU=10,		/* CPU stuff (speed scaling, etc) */
+	CTL_ARLAN=254,		/* arlan wireless driver */
+	CTL_S390DBF=5677,	/* s390 debug */
+	CTL_SUNRPC=7249,	/* sunrpc debug */
+	CTL_PM=9899,		/* frv power management */
+	CTL_FRV=9898,		/* frv specific sysctls */
+};
+
+/* CTL_BUS names: */
+enum
+{
+	CTL_BUS_ISA=1		/* ISA */
+};
+
+/* /proc/sys/fs/inotify/ */
+enum
+{
+	INOTIFY_MAX_USER_INSTANCES=1,	/* max instances per user */
+	INOTIFY_MAX_USER_WATCHES=2,	/* max watches per user */
+	INOTIFY_MAX_QUEUED_EVENTS=3	/* max queued events per instance */
+};
+
+/* CTL_KERN names: */
+enum
+{
+	KERN_OSTYPE=1,		/* string: system version */
+	KERN_OSRELEASE=2,	/* string: system release */
+	KERN_OSREV=3,		/* int: system revision */
+	KERN_VERSION=4,		/* string: compile time info */
+	KERN_SECUREMASK=5,	/* struct: maximum rights mask */
+	KERN_PROF=6,		/* table: profiling information */
+	KERN_NODENAME=7,	/* string: hostname */
+	KERN_DOMAINNAME=8,	/* string: domainname */
+
+	KERN_PANIC=15,		/* int: panic timeout */
+	KERN_REALROOTDEV=16,	/* real root device to mount after initrd */
+
+	KERN_SPARC_REBOOT=21,	/* reboot command on Sparc */
+	KERN_CTLALTDEL=22,	/* int: allow ctl-alt-del to reboot */
+	KERN_PRINTK=23,		/* struct: control printk logging parameters */
+	KERN_NAMETRANS=24,	/* Name translation */
+	KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
+	KERN_PPC_ZEROPAGED=26,	/* turn idle page zeroing on/off on PPC */
+	KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
+	KERN_MODPROBE=28,	/* string: modprobe path */
+	KERN_SG_BIG_BUFF=29,	/* int: sg driver reserved buffer size */
+	KERN_ACCT=30,		/* BSD process accounting parameters */
+	KERN_PPC_L2CR=31,	/* l2cr register on PPC */
+
+	KERN_RTSIGNR=32,	/* Number of rt sigs queued */
+	KERN_RTSIGMAX=33,	/* Max queuable */
+	
+	KERN_SHMMAX=34,         /* long: Maximum shared memory segment */
+	KERN_MSGMAX=35,         /* int: Maximum size of a messege */
+	KERN_MSGMNB=36,         /* int: Maximum message queue size */
+	KERN_MSGPOOL=37,        /* int: Maximum system message pool size */
+	KERN_SYSRQ=38,		/* int: Sysreq enable */
+	KERN_MAX_THREADS=39,	/* int: Maximum nr of threads in the system */
+ 	KERN_RANDOM=40,		/* Random driver */
+ 	KERN_SHMALL=41,		/* int: Maximum size of shared memory */
+ 	KERN_MSGMNI=42,		/* int: msg queue identifiers */
+ 	KERN_SEM=43,		/* struct: sysv semaphore limits */
+ 	KERN_SPARC_STOP_A=44,	/* int: Sparc Stop-A enable */
+ 	KERN_SHMMNI=45,		/* int: shm array identifiers */
+	KERN_OVERFLOWUID=46,	/* int: overflow UID */
+	KERN_OVERFLOWGID=47,	/* int: overflow GID */
+	KERN_SHMPATH=48,	/* string: path to shm fs */
+	KERN_HOTPLUG=49,	/* string: path to uevent helper (deprecated) */
+	KERN_IEEE_EMULATION_WARNINGS=50, /* int: unimplemented ieee instructions */
+	KERN_S390_USER_DEBUG_LOGGING=51,  /* int: dumps of user faults */
+	KERN_CORE_USES_PID=52,		/* int: use core or core.%pid */
+	KERN_TAINTED=53,	/* int: various kernel tainted flags */
+	KERN_CADPID=54,		/* int: PID of the process to notify on CAD */
+	KERN_PIDMAX=55,		/* int: PID # limit */
+  	KERN_CORE_PATTERN=56,	/* string: pattern for core-file names */
+	KERN_PANIC_ON_OOPS=57,  /* int: whether we will panic on an oops */
+	KERN_HPPA_PWRSW=58,	/* int: hppa soft-power enable */
+	KERN_HPPA_UNALIGNED=59,	/* int: hppa unaligned-trap enable */
+	KERN_PRINTK_RATELIMIT=60, /* int: tune printk ratelimiting */
+	KERN_PRINTK_RATELIMIT_BURST=61,	/* int: tune printk ratelimiting */
+	KERN_PTY=62,		/* dir: pty driver */
+	KERN_NGROUPS_MAX=63,	/* int: NGROUPS_MAX */
+	KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
+	KERN_HZ_TIMER=65,	/* int: hz timer on or off */
+	KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
+	KERN_BOOTLOADER_TYPE=67, /* int: boot loader type */
+	KERN_RANDOMIZE=68, /* int: randomize virtual address space */
+	KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
+	KERN_SPIN_RETRY=70,	/* int: number of spinlock retries */
+	KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
+	KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
+	KERN_COMPAT_LOG=73,	/* int: print compat layer  messages */
+	KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
+	KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
+	KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
+};
+
+
+
+/* CTL_VM names: */
+enum
+{
+	VM_UNUSED1=1,		/* was: struct: Set vm swapping control */
+	VM_UNUSED2=2,		/* was; int: Linear or sqrt() swapout for hogs */
+	VM_UNUSED3=3,		/* was: struct: Set free page thresholds */
+	VM_UNUSED4=4,		/* Spare */
+	VM_OVERCOMMIT_MEMORY=5,	/* Turn off the virtual memory safety limit */
+	VM_UNUSED5=6,		/* was: struct: Set buffer memory thresholds */
+	VM_UNUSED7=7,		/* was: struct: Set cache memory thresholds */
+	VM_UNUSED8=8,		/* was: struct: Control kswapd behaviour */
+	VM_UNUSED9=9,		/* was: struct: Set page table cache parameters */
+	VM_PAGE_CLUSTER=10,	/* int: set number of pages to swap together */
+	VM_DIRTY_BACKGROUND=11,	/* dirty_background_ratio */
+	VM_DIRTY_RATIO=12,	/* dirty_ratio */
+	VM_DIRTY_WB_CS=13,	/* dirty_writeback_centisecs */
+	VM_DIRTY_EXPIRE_CS=14,	/* dirty_expire_centisecs */
+	VM_NR_PDFLUSH_THREADS=15, /* nr_pdflush_threads */
+	VM_OVERCOMMIT_RATIO=16, /* percent of RAM to allow overcommit in */
+	VM_PAGEBUF=17,		/* struct: Control pagebuf parameters */
+	VM_HUGETLB_PAGES=18,	/* int: Number of available Huge Pages */
+	VM_SWAPPINESS=19,	/* Tendency to steal mapped memory */
+	VM_LOWMEM_RESERVE_RATIO=20,/* reservation ratio for lower memory zones */
+	VM_MIN_FREE_KBYTES=21,	/* Minimum free kilobytes to maintain */
+	VM_MAX_MAP_COUNT=22,	/* int: Maximum number of mmaps/address-space */
+	VM_LAPTOP_MODE=23,	/* vm laptop mode */
+	VM_BLOCK_DUMP=24,	/* block dump mode */
+	VM_HUGETLB_GROUP=25,	/* permitted hugetlb group */
+	VM_VFS_CACHE_PRESSURE=26, /* dcache/icache reclaim pressure */
+	VM_LEGACY_VA_LAYOUT=27, /* legacy/compatibility virtual address space layout */
+	VM_SWAP_TOKEN_TIMEOUT=28, /* default time for token time out */
+	VM_DROP_PAGECACHE=29,	/* int: nuke lots of pagecache */
+	VM_PERCPU_PAGELIST_FRACTION=30,/* int: fraction of pages in each percpu_pagelist */
+	VM_ZONE_RECLAIM_MODE=31, /* reclaim local zone memory before going off node */
+	VM_MIN_UNMAPPED=32,	/* Set min percent of unmapped pages */
+	VM_PANIC_ON_OOM=33,	/* panic at out-of-memory */
+	VM_VDSO_ENABLED=34,	/* map VDSO into new processes? */
+	VM_MIN_SLAB=35,		 /* Percent pages ignored by zone reclaim */
+};
+
+
+/* CTL_NET names: */
+enum
+{
+	NET_CORE=1,
+	NET_ETHER=2,
+	NET_802=3,
+	NET_UNIX=4,
+	NET_IPV4=5,
+	NET_IPX=6,
+	NET_ATALK=7,
+	NET_NETROM=8,
+	NET_AX25=9,
+	NET_BRIDGE=10,
+	NET_ROSE=11,
+	NET_IPV6=12,
+	NET_X25=13,
+	NET_TR=14,
+	NET_DECNET=15,
+	NET_ECONET=16,
+	NET_SCTP=17,
+	NET_LLC=18,
+	NET_NETFILTER=19,
+	NET_DCCP=20,
+	NET_IRDA=412,
+};
+
+/* /proc/sys/kernel/random */
+enum
+{
+	RANDOM_POOLSIZE=1,
+	RANDOM_ENTROPY_COUNT=2,
+	RANDOM_READ_THRESH=3,
+	RANDOM_WRITE_THRESH=4,
+	RANDOM_BOOT_ID=5,
+	RANDOM_UUID=6
+};
+
+/* /proc/sys/kernel/pty */
+enum
+{
+	PTY_MAX=1,
+	PTY_NR=2
+};
+
+/* /proc/sys/bus/isa */
+enum
+{
+	BUS_ISA_MEM_BASE=1,
+	BUS_ISA_PORT_BASE=2,
+	BUS_ISA_PORT_SHIFT=3
+};
+
+/* /proc/sys/net/core */
+enum
+{
+	NET_CORE_WMEM_MAX=1,
+	NET_CORE_RMEM_MAX=2,
+	NET_CORE_WMEM_DEFAULT=3,
+	NET_CORE_RMEM_DEFAULT=4,
+/* was	NET_CORE_DESTROY_DELAY */
+	NET_CORE_MAX_BACKLOG=6,
+	NET_CORE_FASTROUTE=7,
+	NET_CORE_MSG_COST=8,
+	NET_CORE_MSG_BURST=9,
+	NET_CORE_OPTMEM_MAX=10,
+	NET_CORE_HOT_LIST_LENGTH=11,
+	NET_CORE_DIVERT_VERSION=12,
+	NET_CORE_NO_CONG_THRESH=13,
+	NET_CORE_NO_CONG=14,
+	NET_CORE_LO_CONG=15,
+	NET_CORE_MOD_CONG=16,
+	NET_CORE_DEV_WEIGHT=17,
+	NET_CORE_SOMAXCONN=18,
+	NET_CORE_BUDGET=19,
+	NET_CORE_AEVENT_ETIME=20,
+	NET_CORE_AEVENT_RSEQTH=21,
+	NET_CORE_WARNINGS=22,
+};
+
+/* /proc/sys/net/ethernet */
+
+/* /proc/sys/net/802 */
+
+/* /proc/sys/net/unix */
+
+enum
+{
+	NET_UNIX_DESTROY_DELAY=1,
+	NET_UNIX_DELETE_DELAY=2,
+	NET_UNIX_MAX_DGRAM_QLEN=3,
+};
+
+/* /proc/sys/net/netfilter */
+enum
+{
+	NET_NF_CONNTRACK_MAX=1,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
+	NET_NF_CONNTRACK_UDP_TIMEOUT=10,
+	NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
+	NET_NF_CONNTRACK_ICMP_TIMEOUT=12,
+	NET_NF_CONNTRACK_GENERIC_TIMEOUT=13,
+	NET_NF_CONNTRACK_BUCKETS=14,
+	NET_NF_CONNTRACK_LOG_INVALID=15,
+	NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
+	NET_NF_CONNTRACK_TCP_LOOSE=17,
+	NET_NF_CONNTRACK_TCP_BE_LIBERAL=18,
+	NET_NF_CONNTRACK_TCP_MAX_RETRANS=19,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
+	NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
+	NET_NF_CONNTRACK_COUNT=27,
+	NET_NF_CONNTRACK_ICMPV6_TIMEOUT=28,
+	NET_NF_CONNTRACK_FRAG6_TIMEOUT=29,
+	NET_NF_CONNTRACK_FRAG6_LOW_THRESH=30,
+	NET_NF_CONNTRACK_FRAG6_HIGH_THRESH=31,
+	NET_NF_CONNTRACK_CHECKSUM=32,
+};
+
+/* /proc/sys/net/ipv4 */
+enum
+{
+	/* v2.0 compatibile variables */
+	NET_IPV4_FORWARD=8,
+	NET_IPV4_DYNADDR=9,
+
+	NET_IPV4_CONF=16,
+	NET_IPV4_NEIGH=17,
+	NET_IPV4_ROUTE=18,
+	NET_IPV4_FIB_HASH=19,
+	NET_IPV4_NETFILTER=20,
+
+	NET_IPV4_TCP_TIMESTAMPS=33,
+	NET_IPV4_TCP_WINDOW_SCALING=34,
+	NET_IPV4_TCP_SACK=35,
+	NET_IPV4_TCP_RETRANS_COLLAPSE=36,
+	NET_IPV4_DEFAULT_TTL=37,
+	NET_IPV4_AUTOCONFIG=38,
+	NET_IPV4_NO_PMTU_DISC=39,
+	NET_IPV4_TCP_SYN_RETRIES=40,
+	NET_IPV4_IPFRAG_HIGH_THRESH=41,
+	NET_IPV4_IPFRAG_LOW_THRESH=42,
+	NET_IPV4_IPFRAG_TIME=43,
+	NET_IPV4_TCP_MAX_KA_PROBES=44,
+	NET_IPV4_TCP_KEEPALIVE_TIME=45,
+	NET_IPV4_TCP_KEEPALIVE_PROBES=46,
+	NET_IPV4_TCP_RETRIES1=47,
+	NET_IPV4_TCP_RETRIES2=48,
+	NET_IPV4_TCP_FIN_TIMEOUT=49,
+	NET_IPV4_IP_MASQ_DEBUG=50,
+	NET_TCP_SYNCOOKIES=51,
+	NET_TCP_STDURG=52,
+	NET_TCP_RFC1337=53,
+	NET_TCP_SYN_TAILDROP=54,
+	NET_TCP_MAX_SYN_BACKLOG=55,
+	NET_IPV4_LOCAL_PORT_RANGE=56,
+	NET_IPV4_ICMP_ECHO_IGNORE_ALL=57,
+	NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS=58,
+	NET_IPV4_ICMP_SOURCEQUENCH_RATE=59,
+	NET_IPV4_ICMP_DESTUNREACH_RATE=60,
+	NET_IPV4_ICMP_TIMEEXCEED_RATE=61,
+	NET_IPV4_ICMP_PARAMPROB_RATE=62,
+	NET_IPV4_ICMP_ECHOREPLY_RATE=63,
+	NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES=64,
+	NET_IPV4_IGMP_MAX_MEMBERSHIPS=65,
+	NET_TCP_TW_RECYCLE=66,
+	NET_IPV4_ALWAYS_DEFRAG=67,
+	NET_IPV4_TCP_KEEPALIVE_INTVL=68,
+	NET_IPV4_INET_PEER_THRESHOLD=69,
+	NET_IPV4_INET_PEER_MINTTL=70,
+	NET_IPV4_INET_PEER_MAXTTL=71,
+	NET_IPV4_INET_PEER_GC_MINTIME=72,
+	NET_IPV4_INET_PEER_GC_MAXTIME=73,
+	NET_TCP_ORPHAN_RETRIES=74,
+	NET_TCP_ABORT_ON_OVERFLOW=75,
+	NET_TCP_SYNACK_RETRIES=76,
+	NET_TCP_MAX_ORPHANS=77,
+	NET_TCP_MAX_TW_BUCKETS=78,
+	NET_TCP_FACK=79,
+	NET_TCP_REORDERING=80,
+	NET_TCP_ECN=81,
+	NET_TCP_DSACK=82,
+	NET_TCP_MEM=83,
+	NET_TCP_WMEM=84,
+	NET_TCP_RMEM=85,
+	NET_TCP_APP_WIN=86,
+	NET_TCP_ADV_WIN_SCALE=87,
+	NET_IPV4_NONLOCAL_BIND=88,
+	NET_IPV4_ICMP_RATELIMIT=89,
+	NET_IPV4_ICMP_RATEMASK=90,
+	NET_TCP_TW_REUSE=91,
+	NET_TCP_FRTO=92,
+	NET_TCP_LOW_LATENCY=93,
+	NET_IPV4_IPFRAG_SECRET_INTERVAL=94,
+	NET_IPV4_IGMP_MAX_MSF=96,
+	NET_TCP_NO_METRICS_SAVE=97,
+	NET_TCP_DEFAULT_WIN_SCALE=105,
+	NET_TCP_MODERATE_RCVBUF=106,
+	NET_TCP_TSO_WIN_DIVISOR=107,
+	NET_TCP_BIC_BETA=108,
+	NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109,
+	NET_TCP_CONG_CONTROL=110,
+	NET_TCP_ABC=111,
+	NET_IPV4_IPFRAG_MAX_DIST=112,
+ 	NET_TCP_MTU_PROBING=113,
+	NET_TCP_BASE_MSS=114,
+	NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS=115,
+	NET_TCP_DMA_COPYBREAK=116,
+	NET_TCP_SLOW_START_AFTER_IDLE=117,
+	NET_CIPSOV4_CACHE_ENABLE=118,
+	NET_CIPSOV4_CACHE_BUCKET_SIZE=119,
+	NET_CIPSOV4_RBM_OPTFMT=120,
+	NET_CIPSOV4_RBM_STRICTVALID=121,
+	NET_TCP_AVAIL_CONG_CONTROL=122,
+	NET_TCP_ALLOWED_CONG_CONTROL=123,
+	NET_TCP_MAX_SSTHRESH=124,
+	NET_TCP_FRTO_RESPONSE=125,
+};
+
+enum {
+	NET_IPV4_ROUTE_FLUSH=1,
+	NET_IPV4_ROUTE_MIN_DELAY=2, /* obsolete since 2.6.25 */
+	NET_IPV4_ROUTE_MAX_DELAY=3, /* obsolete since 2.6.25 */
+	NET_IPV4_ROUTE_GC_THRESH=4,
+	NET_IPV4_ROUTE_MAX_SIZE=5,
+	NET_IPV4_ROUTE_GC_MIN_INTERVAL=6,
+	NET_IPV4_ROUTE_GC_TIMEOUT=7,
+	NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */
+	NET_IPV4_ROUTE_REDIRECT_LOAD=9,
+	NET_IPV4_ROUTE_REDIRECT_NUMBER=10,
+	NET_IPV4_ROUTE_REDIRECT_SILENCE=11,
+	NET_IPV4_ROUTE_ERROR_COST=12,
+	NET_IPV4_ROUTE_ERROR_BURST=13,
+	NET_IPV4_ROUTE_GC_ELASTICITY=14,
+	NET_IPV4_ROUTE_MTU_EXPIRES=15,
+	NET_IPV4_ROUTE_MIN_PMTU=16,
+	NET_IPV4_ROUTE_MIN_ADVMSS=17,
+	NET_IPV4_ROUTE_SECRET_INTERVAL=18,
+	NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS=19,
+};
+
+enum
+{
+	NET_PROTO_CONF_ALL=-2,
+	NET_PROTO_CONF_DEFAULT=-3
+
+	/* And device ifindices ... */
+};
+
+enum
+{
+	NET_IPV4_CONF_FORWARDING=1,
+	NET_IPV4_CONF_MC_FORWARDING=2,
+	NET_IPV4_CONF_PROXY_ARP=3,
+	NET_IPV4_CONF_ACCEPT_REDIRECTS=4,
+	NET_IPV4_CONF_SECURE_REDIRECTS=5,
+	NET_IPV4_CONF_SEND_REDIRECTS=6,
+	NET_IPV4_CONF_SHARED_MEDIA=7,
+	NET_IPV4_CONF_RP_FILTER=8,
+	NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE=9,
+	NET_IPV4_CONF_BOOTP_RELAY=10,
+	NET_IPV4_CONF_LOG_MARTIANS=11,
+	NET_IPV4_CONF_TAG=12,
+	NET_IPV4_CONF_ARPFILTER=13,
+	NET_IPV4_CONF_MEDIUM_ID=14,
+	NET_IPV4_CONF_NOXFRM=15,
+	NET_IPV4_CONF_NOPOLICY=16,
+	NET_IPV4_CONF_FORCE_IGMP_VERSION=17,
+	NET_IPV4_CONF_ARP_ANNOUNCE=18,
+	NET_IPV4_CONF_ARP_IGNORE=19,
+	NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
+	NET_IPV4_CONF_ARP_ACCEPT=21,
+	NET_IPV4_CONF_ARP_NOTIFY=22,
+};
+
+/* /proc/sys/net/ipv4/netfilter */
+enum
+{
+	NET_IPV4_NF_CONNTRACK_MAX=1,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT=2,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV=3,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED=4,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT=5,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT=6,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK=7,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT=8,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE=9,
+	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT=10,
+	NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM=11,
+	NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT=12,
+	NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT=13,
+	NET_IPV4_NF_CONNTRACK_BUCKETS=14,
+	NET_IPV4_NF_CONNTRACK_LOG_INVALID=15,
+	NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS=16,
+	NET_IPV4_NF_CONNTRACK_TCP_LOOSE=17,
+	NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL=18,
+	NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS=19,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED=20,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT=21,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED=22,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED=23,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT=24,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD=25,
+ 	NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT=26,
+	NET_IPV4_NF_CONNTRACK_COUNT=27,
+	NET_IPV4_NF_CONNTRACK_CHECKSUM=28,
+};
+ 
+/* /proc/sys/net/ipv6 */
+enum {
+	NET_IPV6_CONF=16,
+	NET_IPV6_NEIGH=17,
+	NET_IPV6_ROUTE=18,
+	NET_IPV6_ICMP=19,
+	NET_IPV6_BINDV6ONLY=20,
+	NET_IPV6_IP6FRAG_HIGH_THRESH=21,
+	NET_IPV6_IP6FRAG_LOW_THRESH=22,
+	NET_IPV6_IP6FRAG_TIME=23,
+	NET_IPV6_IP6FRAG_SECRET_INTERVAL=24,
+	NET_IPV6_MLD_MAX_MSF=25,
+};
+
+enum {
+	NET_IPV6_ROUTE_FLUSH=1,
+	NET_IPV6_ROUTE_GC_THRESH=2,
+	NET_IPV6_ROUTE_MAX_SIZE=3,
+	NET_IPV6_ROUTE_GC_MIN_INTERVAL=4,
+	NET_IPV6_ROUTE_GC_TIMEOUT=5,
+	NET_IPV6_ROUTE_GC_INTERVAL=6,
+	NET_IPV6_ROUTE_GC_ELASTICITY=7,
+	NET_IPV6_ROUTE_MTU_EXPIRES=8,
+	NET_IPV6_ROUTE_MIN_ADVMSS=9,
+	NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS=10
+};
+
+enum {
+	NET_IPV6_FORWARDING=1,
+	NET_IPV6_HOP_LIMIT=2,
+	NET_IPV6_MTU=3,
+	NET_IPV6_ACCEPT_RA=4,
+	NET_IPV6_ACCEPT_REDIRECTS=5,
+	NET_IPV6_AUTOCONF=6,
+	NET_IPV6_DAD_TRANSMITS=7,
+	NET_IPV6_RTR_SOLICITS=8,
+	NET_IPV6_RTR_SOLICIT_INTERVAL=9,
+	NET_IPV6_RTR_SOLICIT_DELAY=10,
+	NET_IPV6_USE_TEMPADDR=11,
+	NET_IPV6_TEMP_VALID_LFT=12,
+	NET_IPV6_TEMP_PREFERED_LFT=13,
+	NET_IPV6_REGEN_MAX_RETRY=14,
+	NET_IPV6_MAX_DESYNC_FACTOR=15,
+	NET_IPV6_MAX_ADDRESSES=16,
+	NET_IPV6_FORCE_MLD_VERSION=17,
+	NET_IPV6_ACCEPT_RA_DEFRTR=18,
+	NET_IPV6_ACCEPT_RA_PINFO=19,
+	NET_IPV6_ACCEPT_RA_RTR_PREF=20,
+	NET_IPV6_RTR_PROBE_INTERVAL=21,
+	NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN=22,
+	NET_IPV6_PROXY_NDP=23,
+	NET_IPV6_ACCEPT_SOURCE_ROUTE=25,
+	__NET_IPV6_MAX
+};
+
+/* /proc/sys/net/ipv6/icmp */
+enum {
+	NET_IPV6_ICMP_RATELIMIT=1
+};
+
+/* /proc/sys/net/<protocol>/neigh/<dev> */
+enum {
+	NET_NEIGH_MCAST_SOLICIT=1,
+	NET_NEIGH_UCAST_SOLICIT=2,
+	NET_NEIGH_APP_SOLICIT=3,
+	NET_NEIGH_RETRANS_TIME=4,
+	NET_NEIGH_REACHABLE_TIME=5,
+	NET_NEIGH_DELAY_PROBE_TIME=6,
+	NET_NEIGH_GC_STALE_TIME=7,
+	NET_NEIGH_UNRES_QLEN=8,
+	NET_NEIGH_PROXY_QLEN=9,
+	NET_NEIGH_ANYCAST_DELAY=10,
+	NET_NEIGH_PROXY_DELAY=11,
+	NET_NEIGH_LOCKTIME=12,
+	NET_NEIGH_GC_INTERVAL=13,
+	NET_NEIGH_GC_THRESH1=14,
+	NET_NEIGH_GC_THRESH2=15,
+	NET_NEIGH_GC_THRESH3=16,
+	NET_NEIGH_RETRANS_TIME_MS=17,
+	NET_NEIGH_REACHABLE_TIME_MS=18,
+};
+
+/* /proc/sys/net/dccp */
+enum {
+	NET_DCCP_DEFAULT=1,
+};
+
+/* /proc/sys/net/ipx */
+enum {
+	NET_IPX_PPROP_BROADCASTING=1,
+	NET_IPX_FORWARDING=2
+};
+
+/* /proc/sys/net/llc */
+enum {
+	NET_LLC2=1,
+	NET_LLC_STATION=2,
+};
+
+/* /proc/sys/net/llc/llc2 */
+enum {
+	NET_LLC2_TIMEOUT=1,
+};
+
+/* /proc/sys/net/llc/station */
+enum {
+	NET_LLC_STATION_ACK_TIMEOUT=1,
+};
+
+/* /proc/sys/net/llc/llc2/timeout */
+enum {
+	NET_LLC2_ACK_TIMEOUT=1,
+	NET_LLC2_P_TIMEOUT=2,
+	NET_LLC2_REJ_TIMEOUT=3,
+	NET_LLC2_BUSY_TIMEOUT=4,
+};
+
+/* /proc/sys/net/appletalk */
+enum {
+	NET_ATALK_AARP_EXPIRY_TIME=1,
+	NET_ATALK_AARP_TICK_TIME=2,
+	NET_ATALK_AARP_RETRANSMIT_LIMIT=3,
+	NET_ATALK_AARP_RESOLVE_TIME=4
+};
+
+
+/* /proc/sys/net/netrom */
+enum {
+	NET_NETROM_DEFAULT_PATH_QUALITY=1,
+	NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER=2,
+	NET_NETROM_NETWORK_TTL_INITIALISER=3,
+	NET_NETROM_TRANSPORT_TIMEOUT=4,
+	NET_NETROM_TRANSPORT_MAXIMUM_TRIES=5,
+	NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY=6,
+	NET_NETROM_TRANSPORT_BUSY_DELAY=7,
+	NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE=8,
+	NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT=9,
+	NET_NETROM_ROUTING_CONTROL=10,
+	NET_NETROM_LINK_FAILS_COUNT=11,
+	NET_NETROM_RESET=12
+};
+
+/* /proc/sys/net/ax25 */
+enum {
+	NET_AX25_IP_DEFAULT_MODE=1,
+	NET_AX25_DEFAULT_MODE=2,
+	NET_AX25_BACKOFF_TYPE=3,
+	NET_AX25_CONNECT_MODE=4,
+	NET_AX25_STANDARD_WINDOW=5,
+	NET_AX25_EXTENDED_WINDOW=6,
+	NET_AX25_T1_TIMEOUT=7,
+	NET_AX25_T2_TIMEOUT=8,
+	NET_AX25_T3_TIMEOUT=9,
+	NET_AX25_IDLE_TIMEOUT=10,
+	NET_AX25_N2=11,
+	NET_AX25_PACLEN=12,
+	NET_AX25_PROTOCOL=13,
+	NET_AX25_DAMA_SLAVE_TIMEOUT=14
+};
+
+/* /proc/sys/net/rose */
+enum {
+	NET_ROSE_RESTART_REQUEST_TIMEOUT=1,
+	NET_ROSE_CALL_REQUEST_TIMEOUT=2,
+	NET_ROSE_RESET_REQUEST_TIMEOUT=3,
+	NET_ROSE_CLEAR_REQUEST_TIMEOUT=4,
+	NET_ROSE_ACK_HOLD_BACK_TIMEOUT=5,
+	NET_ROSE_ROUTING_CONTROL=6,
+	NET_ROSE_LINK_FAIL_TIMEOUT=7,
+	NET_ROSE_MAX_VCS=8,
+	NET_ROSE_WINDOW_SIZE=9,
+	NET_ROSE_NO_ACTIVITY_TIMEOUT=10
+};
+
+/* /proc/sys/net/x25 */
+enum {
+	NET_X25_RESTART_REQUEST_TIMEOUT=1,
+	NET_X25_CALL_REQUEST_TIMEOUT=2,
+	NET_X25_RESET_REQUEST_TIMEOUT=3,
+	NET_X25_CLEAR_REQUEST_TIMEOUT=4,
+	NET_X25_ACK_HOLD_BACK_TIMEOUT=5,
+	NET_X25_FORWARD=6
+};
+
+/* /proc/sys/net/token-ring */
+enum
+{
+	NET_TR_RIF_TIMEOUT=1
+};
+
+/* /proc/sys/net/decnet/ */
+enum {
+	NET_DECNET_NODE_TYPE = 1,
+	NET_DECNET_NODE_ADDRESS = 2,
+	NET_DECNET_NODE_NAME = 3,
+	NET_DECNET_DEFAULT_DEVICE = 4,
+	NET_DECNET_TIME_WAIT = 5,
+	NET_DECNET_DN_COUNT = 6,
+	NET_DECNET_DI_COUNT = 7,
+	NET_DECNET_DR_COUNT = 8,
+	NET_DECNET_DST_GC_INTERVAL = 9,
+	NET_DECNET_CONF = 10,
+	NET_DECNET_NO_FC_MAX_CWND = 11,
+	NET_DECNET_MEM = 12,
+	NET_DECNET_RMEM = 13,
+	NET_DECNET_WMEM = 14,
+	NET_DECNET_DEBUG_LEVEL = 255
+};
+
+/* /proc/sys/net/decnet/conf/<dev> */
+enum {
+	NET_DECNET_CONF_LOOPBACK = -2,
+	NET_DECNET_CONF_DDCMP = -3,
+	NET_DECNET_CONF_PPP = -4,
+	NET_DECNET_CONF_X25 = -5,
+	NET_DECNET_CONF_GRE = -6,
+	NET_DECNET_CONF_ETHER = -7
+
+	/* ... and ifindex of devices */
+};
+
+/* /proc/sys/net/decnet/conf/<dev>/ */
+enum {
+	NET_DECNET_CONF_DEV_PRIORITY = 1,
+	NET_DECNET_CONF_DEV_T1 = 2,
+	NET_DECNET_CONF_DEV_T2 = 3,
+	NET_DECNET_CONF_DEV_T3 = 4,
+	NET_DECNET_CONF_DEV_FORWARDING = 5,
+	NET_DECNET_CONF_DEV_BLKSIZE = 6,
+	NET_DECNET_CONF_DEV_STATE = 7
+};
+
+/* /proc/sys/net/sctp */
+enum {
+	NET_SCTP_RTO_INITIAL = 1,
+	NET_SCTP_RTO_MIN     = 2,
+	NET_SCTP_RTO_MAX     = 3,
+	NET_SCTP_RTO_ALPHA   = 4,
+	NET_SCTP_RTO_BETA    = 5,
+	NET_SCTP_VALID_COOKIE_LIFE       =  6,
+	NET_SCTP_ASSOCIATION_MAX_RETRANS =  7,
+	NET_SCTP_PATH_MAX_RETRANS        =  8,
+	NET_SCTP_MAX_INIT_RETRANSMITS    =  9,
+	NET_SCTP_HB_INTERVAL             = 10,
+	NET_SCTP_PRESERVE_ENABLE         = 11,
+	NET_SCTP_MAX_BURST               = 12,
+	NET_SCTP_ADDIP_ENABLE		 = 13,
+	NET_SCTP_PRSCTP_ENABLE		 = 14,
+	NET_SCTP_SNDBUF_POLICY		 = 15,
+	NET_SCTP_SACK_TIMEOUT		 = 16,
+	NET_SCTP_RCVBUF_POLICY		 = 17,
+};
+
+/* /proc/sys/net/bridge */
+enum {
+	NET_BRIDGE_NF_CALL_ARPTABLES = 1,
+	NET_BRIDGE_NF_CALL_IPTABLES = 2,
+	NET_BRIDGE_NF_CALL_IP6TABLES = 3,
+	NET_BRIDGE_NF_FILTER_VLAN_TAGGED = 4,
+	NET_BRIDGE_NF_FILTER_PPPOE_TAGGED = 5,
+};
+
+/* proc/sys/net/irda */
+enum {
+	NET_IRDA_DISCOVERY=1,
+	NET_IRDA_DEVNAME=2,
+	NET_IRDA_DEBUG=3,
+	NET_IRDA_FAST_POLL=4,
+	NET_IRDA_DISCOVERY_SLOTS=5,
+	NET_IRDA_DISCOVERY_TIMEOUT=6,
+	NET_IRDA_SLOT_TIMEOUT=7,
+	NET_IRDA_MAX_BAUD_RATE=8,
+	NET_IRDA_MIN_TX_TURN_TIME=9,
+	NET_IRDA_MAX_TX_DATA_SIZE=10,
+	NET_IRDA_MAX_TX_WINDOW=11,
+	NET_IRDA_MAX_NOREPLY_TIME=12,
+	NET_IRDA_WARN_NOREPLY_TIME=13,
+	NET_IRDA_LAP_KEEPALIVE_TIME=14,
+};
+
+
+/* CTL_FS names: */
+enum
+{
+	FS_NRINODE=1,	/* int:current number of allocated inodes */
+	FS_STATINODE=2,
+	FS_MAXINODE=3,	/* int:maximum number of inodes that can be allocated */
+	FS_NRDQUOT=4,	/* int:current number of allocated dquots */
+	FS_MAXDQUOT=5,	/* int:maximum number of dquots that can be allocated */
+	FS_NRFILE=6,	/* int:current number of allocated filedescriptors */
+	FS_MAXFILE=7,	/* int:maximum number of filedescriptors that can be allocated */
+	FS_DENTRY=8,
+	FS_NRSUPER=9,	/* int:current number of allocated super_blocks */
+	FS_MAXSUPER=10,	/* int:maximum number of super_blocks that can be allocated */
+	FS_OVERFLOWUID=11,	/* int: overflow UID */
+	FS_OVERFLOWGID=12,	/* int: overflow GID */
+	FS_LEASES=13,	/* int: leases enabled */
+	FS_DIR_NOTIFY=14,	/* int: directory notification enabled */
+	FS_LEASE_TIME=15,	/* int: maximum time to wait for a lease break */
+	FS_DQSTATS=16,	/* disc quota usage statistics and control */
+	FS_XFS=17,	/* struct: control xfs parameters */
+	FS_AIO_NR=18,	/* current system-wide number of aio requests */
+	FS_AIO_MAX_NR=19,	/* system-wide maximum number of aio requests */
+	FS_INOTIFY=20,	/* inotify submenu */
+	FS_OCFS2=988,	/* ocfs2 */
+};
+
+/* /proc/sys/fs/quota/ */
+enum {
+	FS_DQ_LOOKUPS = 1,
+	FS_DQ_DROPS = 2,
+	FS_DQ_READS = 3,
+	FS_DQ_WRITES = 4,
+	FS_DQ_CACHE_HITS = 5,
+	FS_DQ_ALLOCATED = 6,
+	FS_DQ_FREE = 7,
+	FS_DQ_SYNCS = 8,
+	FS_DQ_WARNINGS = 9,
+};
+
+/* CTL_DEBUG names: */
+
+/* CTL_DEV names: */
+enum {
+	DEV_CDROM=1,
+	DEV_HWMON=2,
+	DEV_PARPORT=3,
+	DEV_RAID=4,
+	DEV_MAC_HID=5,
+	DEV_SCSI=6,
+	DEV_IPMI=7,
+};
+
+/* /proc/sys/dev/cdrom */
+enum {
+	DEV_CDROM_INFO=1,
+	DEV_CDROM_AUTOCLOSE=2,
+	DEV_CDROM_AUTOEJECT=3,
+	DEV_CDROM_DEBUG=4,
+	DEV_CDROM_LOCK=5,
+	DEV_CDROM_CHECK_MEDIA=6
+};
+
+/* /proc/sys/dev/parport */
+enum {
+	DEV_PARPORT_DEFAULT=-3
+};
+
+/* /proc/sys/dev/raid */
+enum {
+	DEV_RAID_SPEED_LIMIT_MIN=1,
+	DEV_RAID_SPEED_LIMIT_MAX=2
+};
+
+/* /proc/sys/dev/parport/default */
+enum {
+	DEV_PARPORT_DEFAULT_TIMESLICE=1,
+	DEV_PARPORT_DEFAULT_SPINTIME=2
+};
+
+/* /proc/sys/dev/parport/parport n */
+enum {
+	DEV_PARPORT_SPINTIME=1,
+	DEV_PARPORT_BASE_ADDR=2,
+	DEV_PARPORT_IRQ=3,
+	DEV_PARPORT_DMA=4,
+	DEV_PARPORT_MODES=5,
+	DEV_PARPORT_DEVICES=6,
+	DEV_PARPORT_AUTOPROBE=16
+};
+
+/* /proc/sys/dev/parport/parport n/devices/ */
+enum {
+	DEV_PARPORT_DEVICES_ACTIVE=-3,
+};
+
+/* /proc/sys/dev/parport/parport n/devices/device n */
+enum {
+	DEV_PARPORT_DEVICE_TIMESLICE=1,
+};
+
+/* /proc/sys/dev/mac_hid */
+enum {
+	DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES=1,
+	DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES=2,
+	DEV_MAC_HID_MOUSE_BUTTON_EMULATION=3,
+	DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE=4,
+	DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE=5,
+	DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES=6
+};
+
+/* /proc/sys/dev/scsi */
+enum {
+	DEV_SCSI_LOGGING_LEVEL=1,
+};
+
+/* /proc/sys/dev/ipmi */
+enum {
+	DEV_IPMI_POWEROFF_POWERCYCLE=1,
+};
+
+/* /proc/sys/abi */
+enum
+{
+	ABI_DEFHANDLER_COFF=1,	/* default handler for coff binaries */
+	ABI_DEFHANDLER_ELF=2, 	/* default handler for ELF binaries */
+	ABI_DEFHANDLER_LCALL7=3,/* default handler for procs using lcall7 */
+	ABI_DEFHANDLER_LIBCSO=4,/* default handler for an libc.so ELF interp */
+	ABI_TRACE=5,		/* tracing flags */
+	ABI_FAKE_UTSNAME=6,	/* fake target utsname information */
+};
+
+
+#endif /* _UAPI_LINUX_SYSCTL_H */
diff --git a/include/linux/sysinfo.h b/include/uapi/linux/sysinfo.h
similarity index 100%
rename from include/linux/sysinfo.h
rename to include/uapi/linux/sysinfo.h
diff --git a/include/linux/taskstats.h b/include/uapi/linux/taskstats.h
similarity index 100%
rename from include/linux/taskstats.h
rename to include/uapi/linux/taskstats.h
diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h
new file mode 100644
index 0000000..c4b89a5
--- /dev/null
+++ b/include/uapi/linux/tcp.h
@@ -0,0 +1,225 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the TCP protocol.
+ *
+ * Version:	@(#)tcp.h	1.0.2	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_TCP_H
+#define _UAPI_LINUX_TCP_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/socket.h>
+
+struct tcphdr {
+	__be16	source;
+	__be16	dest;
+	__be32	seq;
+	__be32	ack_seq;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u16	res1:4,
+		doff:4,
+		fin:1,
+		syn:1,
+		rst:1,
+		psh:1,
+		ack:1,
+		urg:1,
+		ece:1,
+		cwr:1;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u16	doff:4,
+		res1:4,
+		cwr:1,
+		ece:1,
+		urg:1,
+		ack:1,
+		psh:1,
+		rst:1,
+		syn:1,
+		fin:1;
+#else
+#error	"Adjust your <asm/byteorder.h> defines"
+#endif	
+	__be16	window;
+	__sum16	check;
+	__be16	urg_ptr;
+};
+
+/*
+ *	The union cast uses a gcc extension to avoid aliasing problems
+ *  (union is compatible to any of its members)
+ *  This means this part of the code is -fstrict-aliasing safe now.
+ */
+union tcp_word_hdr { 
+	struct tcphdr hdr;
+	__be32 		  words[5];
+}; 
+
+#define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3]) 
+
+enum { 
+	TCP_FLAG_CWR = __constant_cpu_to_be32(0x00800000),
+	TCP_FLAG_ECE = __constant_cpu_to_be32(0x00400000),
+	TCP_FLAG_URG = __constant_cpu_to_be32(0x00200000),
+	TCP_FLAG_ACK = __constant_cpu_to_be32(0x00100000),
+	TCP_FLAG_PSH = __constant_cpu_to_be32(0x00080000),
+	TCP_FLAG_RST = __constant_cpu_to_be32(0x00040000),
+	TCP_FLAG_SYN = __constant_cpu_to_be32(0x00020000),
+	TCP_FLAG_FIN = __constant_cpu_to_be32(0x00010000),
+	TCP_RESERVED_BITS = __constant_cpu_to_be32(0x0F000000),
+	TCP_DATA_OFFSET = __constant_cpu_to_be32(0xF0000000)
+}; 
+
+/*
+ * TCP general constants
+ */
+#define TCP_MSS_DEFAULT		 536U	/* IPv4 (RFC1122, RFC2581) */
+#define TCP_MSS_DESIRED		1220U	/* IPv6 (tunneled), EDNS0 (RFC3226) */
+
+/* TCP socket options */
+#define TCP_NODELAY		1	/* Turn off Nagle's algorithm. */
+#define TCP_MAXSEG		2	/* Limit MSS */
+#define TCP_CORK		3	/* Never send partially complete segments */
+#define TCP_KEEPIDLE		4	/* Start keeplives after this period */
+#define TCP_KEEPINTVL		5	/* Interval between keepalives */
+#define TCP_KEEPCNT		6	/* Number of keepalives before death */
+#define TCP_SYNCNT		7	/* Number of SYN retransmits */
+#define TCP_LINGER2		8	/* Life time of orphaned FIN-WAIT-2 state */
+#define TCP_DEFER_ACCEPT	9	/* Wake up listener only when data arrive */
+#define TCP_WINDOW_CLAMP	10	/* Bound advertised window */
+#define TCP_INFO		11	/* Information about this connection. */
+#define TCP_QUICKACK		12	/* Block/reenable quick acks */
+#define TCP_CONGESTION		13	/* Congestion control algorithm */
+#define TCP_MD5SIG		14	/* TCP MD5 Signature (RFC2385) */
+#define TCP_COOKIE_TRANSACTIONS	15	/* TCP Cookie Transactions */
+#define TCP_THIN_LINEAR_TIMEOUTS 16      /* Use linear timeouts for thin streams*/
+#define TCP_THIN_DUPACK         17      /* Fast retrans. after 1 dupack */
+#define TCP_USER_TIMEOUT	18	/* How long for loss retry before timeout */
+#define TCP_REPAIR		19	/* TCP sock is under repair right now */
+#define TCP_REPAIR_QUEUE	20
+#define TCP_QUEUE_SEQ		21
+#define TCP_REPAIR_OPTIONS	22
+#define TCP_FASTOPEN		23	/* Enable FastOpen on listeners */
+
+struct tcp_repair_opt {
+	__u32	opt_code;
+	__u32	opt_val;
+};
+
+enum {
+	TCP_NO_QUEUE,
+	TCP_RECV_QUEUE,
+	TCP_SEND_QUEUE,
+	TCP_QUEUES_NR,
+};
+
+/* for TCP_INFO socket option */
+#define TCPI_OPT_TIMESTAMPS	1
+#define TCPI_OPT_SACK		2
+#define TCPI_OPT_WSCALE		4
+#define TCPI_OPT_ECN		8 /* ECN was negociated at TCP session init */
+#define TCPI_OPT_ECN_SEEN	16 /* we received at least one packet with ECT */
+
+enum tcp_ca_state {
+	TCP_CA_Open = 0,
+#define TCPF_CA_Open	(1<<TCP_CA_Open)
+	TCP_CA_Disorder = 1,
+#define TCPF_CA_Disorder (1<<TCP_CA_Disorder)
+	TCP_CA_CWR = 2,
+#define TCPF_CA_CWR	(1<<TCP_CA_CWR)
+	TCP_CA_Recovery = 3,
+#define TCPF_CA_Recovery (1<<TCP_CA_Recovery)
+	TCP_CA_Loss = 4
+#define TCPF_CA_Loss	(1<<TCP_CA_Loss)
+};
+
+struct tcp_info {
+	__u8	tcpi_state;
+	__u8	tcpi_ca_state;
+	__u8	tcpi_retransmits;
+	__u8	tcpi_probes;
+	__u8	tcpi_backoff;
+	__u8	tcpi_options;
+	__u8	tcpi_snd_wscale : 4, tcpi_rcv_wscale : 4;
+
+	__u32	tcpi_rto;
+	__u32	tcpi_ato;
+	__u32	tcpi_snd_mss;
+	__u32	tcpi_rcv_mss;
+
+	__u32	tcpi_unacked;
+	__u32	tcpi_sacked;
+	__u32	tcpi_lost;
+	__u32	tcpi_retrans;
+	__u32	tcpi_fackets;
+
+	/* Times. */
+	__u32	tcpi_last_data_sent;
+	__u32	tcpi_last_ack_sent;     /* Not remembered, sorry. */
+	__u32	tcpi_last_data_recv;
+	__u32	tcpi_last_ack_recv;
+
+	/* Metrics. */
+	__u32	tcpi_pmtu;
+	__u32	tcpi_rcv_ssthresh;
+	__u32	tcpi_rtt;
+	__u32	tcpi_rttvar;
+	__u32	tcpi_snd_ssthresh;
+	__u32	tcpi_snd_cwnd;
+	__u32	tcpi_advmss;
+	__u32	tcpi_reordering;
+
+	__u32	tcpi_rcv_rtt;
+	__u32	tcpi_rcv_space;
+
+	__u32	tcpi_total_retrans;
+};
+
+/* for TCP_MD5SIG socket option */
+#define TCP_MD5SIG_MAXKEYLEN	80
+
+struct tcp_md5sig {
+	struct __kernel_sockaddr_storage tcpm_addr;	/* address associated */
+	__u16	__tcpm_pad1;				/* zero */
+	__u16	tcpm_keylen;				/* key length */
+	__u32	__tcpm_pad2;				/* zero */
+	__u8	tcpm_key[TCP_MD5SIG_MAXKEYLEN];		/* key (binary) */
+};
+
+/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
+#define TCP_COOKIE_MIN		 8		/*  64-bits */
+#define TCP_COOKIE_MAX		16		/* 128-bits */
+#define TCP_COOKIE_PAIR_SIZE	(2*TCP_COOKIE_MAX)
+
+/* Flags for both getsockopt and setsockopt */
+#define TCP_COOKIE_IN_ALWAYS	(1 << 0)	/* Discard SYN without cookie */
+#define TCP_COOKIE_OUT_NEVER	(1 << 1)	/* Prohibit outgoing cookies,
+						 * supercedes everything. */
+
+/* Flags for getsockopt */
+#define TCP_S_DATA_IN		(1 << 2)	/* Was data received? */
+#define TCP_S_DATA_OUT		(1 << 3)	/* Was data sent? */
+
+/* TCP_COOKIE_TRANSACTIONS data */
+struct tcp_cookie_transactions {
+	__u16	tcpct_flags;			/* see above */
+	__u8	__tcpct_pad1;			/* zero */
+	__u8	tcpct_cookie_desired;		/* bytes */
+	__u16	tcpct_s_data_desired;		/* bytes of variable data */
+	__u16	tcpct_used;			/* bytes in value */
+	__u8	tcpct_value[TCP_MSS_DEFAULT];
+};
+
+
+#endif /* _UAPI_LINUX_TCP_H */
diff --git a/include/linux/tcp_metrics.h b/include/uapi/linux/tcp_metrics.h
similarity index 100%
rename from include/linux/tcp_metrics.h
rename to include/uapi/linux/tcp_metrics.h
diff --git a/include/linux/telephony.h b/include/uapi/linux/telephony.h
similarity index 100%
rename from include/linux/telephony.h
rename to include/uapi/linux/telephony.h
diff --git a/include/linux/termios.h b/include/uapi/linux/termios.h
similarity index 100%
rename from include/linux/termios.h
rename to include/uapi/linux/termios.h
diff --git a/include/uapi/linux/time.h b/include/uapi/linux/time.h
new file mode 100644
index 0000000..0d3c0ed
--- /dev/null
+++ b/include/uapi/linux/time.h
@@ -0,0 +1,71 @@
+#ifndef _UAPI_LINUX_TIME_H
+#define _UAPI_LINUX_TIME_H
+
+#include <linux/types.h>
+
+
+#ifndef _STRUCT_TIMESPEC
+#define _STRUCT_TIMESPEC
+struct timespec {
+	__kernel_time_t	tv_sec;			/* seconds */
+	long		tv_nsec;		/* nanoseconds */
+};
+#endif
+
+struct timeval {
+	__kernel_time_t		tv_sec;		/* seconds */
+	__kernel_suseconds_t	tv_usec;	/* microseconds */
+};
+
+struct timezone {
+	int	tz_minuteswest;	/* minutes west of Greenwich */
+	int	tz_dsttime;	/* type of dst correction */
+};
+
+
+/*
+ * Names of the interval timers, and structure
+ * defining a timer setting:
+ */
+#define	ITIMER_REAL		0
+#define	ITIMER_VIRTUAL		1
+#define	ITIMER_PROF		2
+
+struct itimerspec {
+	struct timespec it_interval;	/* timer period */
+	struct timespec it_value;	/* timer expiration */
+};
+
+struct itimerval {
+	struct timeval it_interval;	/* timer interval */
+	struct timeval it_value;	/* current value */
+};
+
+/*
+ * The IDs of the various system clocks (for POSIX.1b interval timers):
+ */
+#define CLOCK_REALTIME			0
+#define CLOCK_MONOTONIC			1
+#define CLOCK_PROCESS_CPUTIME_ID	2
+#define CLOCK_THREAD_CPUTIME_ID		3
+#define CLOCK_MONOTONIC_RAW		4
+#define CLOCK_REALTIME_COARSE		5
+#define CLOCK_MONOTONIC_COARSE		6
+#define CLOCK_BOOTTIME			7
+#define CLOCK_REALTIME_ALARM		8
+#define CLOCK_BOOTTIME_ALARM		9
+
+/*
+ * The IDs of various hardware clocks:
+ */
+#define CLOCK_SGI_CYCLE			10
+#define MAX_CLOCKS			16
+#define CLOCKS_MASK			(CLOCK_REALTIME | CLOCK_MONOTONIC)
+#define CLOCKS_MONO			CLOCK_MONOTONIC
+
+/*
+ * The various flags for setting POSIX.1b interval timers:
+ */
+#define TIMER_ABSTIME			0x01
+
+#endif /* _UAPI_LINUX_TIME_H */
diff --git a/include/linux/times.h b/include/uapi/linux/times.h
similarity index 100%
rename from include/linux/times.h
rename to include/uapi/linux/times.h
diff --git a/include/uapi/linux/timex.h b/include/uapi/linux/timex.h
new file mode 100644
index 0000000..a7ea81f
--- /dev/null
+++ b/include/uapi/linux/timex.h
@@ -0,0 +1,166 @@
+/*****************************************************************************
+ *                                                                           *
+ * Copyright (c) David L. Mills 1993                                         *
+ *                                                                           *
+ * Permission to use, copy, modify, and distribute this software and its     *
+ * documentation for any purpose and without fee is hereby granted, provided *
+ * that the above copyright notice appears in all copies and that both the   *
+ * copyright notice and this permission notice appear in supporting          *
+ * documentation, and that the name University of Delaware not be used in    *
+ * advertising or publicity pertaining to distribution of the software       *
+ * without specific, written prior permission.  The University of Delaware   *
+ * makes no representations about the suitability this software for any      *
+ * purpose.  It is provided "as is" without express or implied warranty.     *
+ *                                                                           *
+ *****************************************************************************/
+
+/*
+ * Modification history timex.h
+ *
+ * 29 Dec 97	Russell King
+ *	Moved CLOCK_TICK_RATE, CLOCK_TICK_FACTOR and FINETUNE to asm/timex.h
+ *	for ARM machines
+ *
+ *  9 Jan 97    Adrian Sun
+ *      Shifted LATCH define to allow access to alpha machines.
+ *
+ * 26 Sep 94	David L. Mills
+ *	Added defines for hybrid phase/frequency-lock loop.
+ *
+ * 19 Mar 94	David L. Mills
+ *	Moved defines from kernel routines to header file and added new
+ *	defines for PPS phase-lock loop.
+ *
+ * 20 Feb 94	David L. Mills
+ *	Revised status codes and structures for external clock and PPS
+ *	signal discipline.
+ *
+ * 28 Nov 93	David L. Mills
+ *	Adjusted parameters to improve stability and increase poll
+ *	interval.
+ *
+ * 17 Sep 93    David L. Mills
+ *      Created file $NTP/include/sys/timex.h
+ * 07 Oct 93    Torsten Duwe
+ *      Derived linux/timex.h
+ * 1995-08-13    Torsten Duwe
+ *      kernel PLL updated to 1994-12-13 specs (rfc-1589)
+ * 1997-08-30    Ulrich Windl
+ *      Added new constant NTP_PHASE_LIMIT
+ * 2004-08-12    Christoph Lameter
+ *      Reworked time interpolation logic
+ */
+#ifndef _UAPI_LINUX_TIMEX_H
+#define _UAPI_LINUX_TIMEX_H
+
+#include <linux/time.h>
+
+#define NTP_API		4	/* NTP API version */
+
+/*
+ * syscall interface - used (mainly by NTP daemon)
+ * to discipline kernel clock oscillator
+ */
+struct timex {
+	unsigned int modes;	/* mode selector */
+	long offset;		/* time offset (usec) */
+	long freq;		/* frequency offset (scaled ppm) */
+	long maxerror;		/* maximum error (usec) */
+	long esterror;		/* estimated error (usec) */
+	int status;		/* clock command/status */
+	long constant;		/* pll time constant */
+	long precision;		/* clock precision (usec) (read only) */
+	long tolerance;		/* clock frequency tolerance (ppm)
+				 * (read only)
+				 */
+	struct timeval time;	/* (read only, except for ADJ_SETOFFSET) */
+	long tick;		/* (modified) usecs between clock ticks */
+
+	long ppsfreq;           /* pps frequency (scaled ppm) (ro) */
+	long jitter;            /* pps jitter (us) (ro) */
+	int shift;              /* interval duration (s) (shift) (ro) */
+	long stabil;            /* pps stability (scaled ppm) (ro) */
+	long jitcnt;            /* jitter limit exceeded (ro) */
+	long calcnt;            /* calibration intervals (ro) */
+	long errcnt;            /* calibration errors (ro) */
+	long stbcnt;            /* stability limit exceeded (ro) */
+
+	int tai;		/* TAI offset (ro) */
+
+	int  :32; int  :32; int  :32; int  :32;
+	int  :32; int  :32; int  :32; int  :32;
+	int  :32; int  :32; int  :32;
+};
+
+/*
+ * Mode codes (timex.mode)
+ */
+#define ADJ_OFFSET		0x0001	/* time offset */
+#define ADJ_FREQUENCY		0x0002	/* frequency offset */
+#define ADJ_MAXERROR		0x0004	/* maximum time error */
+#define ADJ_ESTERROR		0x0008	/* estimated time error */
+#define ADJ_STATUS		0x0010	/* clock status */
+#define ADJ_TIMECONST		0x0020	/* pll time constant */
+#define ADJ_TAI			0x0080	/* set TAI offset */
+#define ADJ_SETOFFSET		0x0100  /* add 'time' to current time */
+#define ADJ_MICRO		0x1000	/* select microsecond resolution */
+#define ADJ_NANO		0x2000	/* select nanosecond resolution */
+#define ADJ_TICK		0x4000	/* tick value */
+
+#ifndef __KERNEL__
+#define ADJ_OFFSET_SINGLESHOT	0x8001	/* old-fashioned adjtime */
+#define ADJ_OFFSET_SS_READ	0xa001	/* read-only adjtime */
+#endif
+
+/* NTP userland likes the MOD_ prefix better */
+#define MOD_OFFSET	ADJ_OFFSET
+#define MOD_FREQUENCY	ADJ_FREQUENCY
+#define MOD_MAXERROR	ADJ_MAXERROR
+#define MOD_ESTERROR	ADJ_ESTERROR
+#define MOD_STATUS	ADJ_STATUS
+#define MOD_TIMECONST	ADJ_TIMECONST
+#define MOD_TAI	ADJ_TAI
+#define MOD_MICRO	ADJ_MICRO
+#define MOD_NANO	ADJ_NANO
+
+
+/*
+ * Status codes (timex.status)
+ */
+#define STA_PLL		0x0001	/* enable PLL updates (rw) */
+#define STA_PPSFREQ	0x0002	/* enable PPS freq discipline (rw) */
+#define STA_PPSTIME	0x0004	/* enable PPS time discipline (rw) */
+#define STA_FLL		0x0008	/* select frequency-lock mode (rw) */
+
+#define STA_INS		0x0010	/* insert leap (rw) */
+#define STA_DEL		0x0020	/* delete leap (rw) */
+#define STA_UNSYNC	0x0040	/* clock unsynchronized (rw) */
+#define STA_FREQHOLD	0x0080	/* hold frequency (rw) */
+
+#define STA_PPSSIGNAL	0x0100	/* PPS signal present (ro) */
+#define STA_PPSJITTER	0x0200	/* PPS signal jitter exceeded (ro) */
+#define STA_PPSWANDER	0x0400	/* PPS signal wander exceeded (ro) */
+#define STA_PPSERROR	0x0800	/* PPS signal calibration error (ro) */
+
+#define STA_CLOCKERR	0x1000	/* clock hardware fault (ro) */
+#define STA_NANO	0x2000	/* resolution (0 = us, 1 = ns) (ro) */
+#define STA_MODE	0x4000	/* mode (0 = PLL, 1 = FLL) (ro) */
+#define STA_CLK		0x8000	/* clock source (0 = A, 1 = B) (ro) */
+
+/* read-only bits */
+#define STA_RONLY (STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | \
+	STA_PPSERROR | STA_CLOCKERR | STA_NANO | STA_MODE | STA_CLK)
+
+/*
+ * Clock states (time_state)
+ */
+#define TIME_OK		0	/* clock synchronized, no leap second */
+#define TIME_INS	1	/* insert leap second */
+#define TIME_DEL	2	/* delete leap second */
+#define TIME_OOP	3	/* leap second in progress */
+#define TIME_WAIT	4	/* leap second has occurred */
+#define TIME_ERROR	5	/* clock not synchronized */
+#define TIME_BAD	TIME_ERROR /* bw compat */
+
+
+#endif /* _UAPI_LINUX_TIMEX_H */
diff --git a/include/linux/tiocl.h b/include/uapi/linux/tiocl.h
similarity index 100%
rename from include/linux/tiocl.h
rename to include/uapi/linux/tiocl.h
diff --git a/include/linux/tipc.h b/include/uapi/linux/tipc.h
similarity index 100%
rename from include/linux/tipc.h
rename to include/uapi/linux/tipc.h
diff --git a/include/linux/tipc_config.h b/include/uapi/linux/tipc_config.h
similarity index 100%
rename from include/linux/tipc_config.h
rename to include/uapi/linux/tipc_config.h
diff --git a/include/uapi/linux/toshiba.h b/include/uapi/linux/toshiba.h
new file mode 100644
index 0000000..e9bef5b
--- /dev/null
+++ b/include/uapi/linux/toshiba.h
@@ -0,0 +1,37 @@
+/* toshiba.h -- Linux driver for accessing the SMM on Toshiba laptops 
+ *
+ * Copyright (c) 1996-2000  Jonathan A. Buzzard (jonathan@buzzard.org.uk)
+ *
+ * Thanks to Juergen Heinzl <juergen@monocerus.demon.co.uk> for the pointers
+ * on making sure the structure is aligned and packed.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef _UAPI_LINUX_TOSHIBA_H
+#define _UAPI_LINUX_TOSHIBA_H
+
+#define TOSH_PROC "/proc/toshiba"
+#define TOSH_DEVICE "/dev/toshiba"
+#define TOSH_SMM _IOWR('t', 0x90, int)	/* broken: meant 24 bytes */
+
+typedef struct {
+	unsigned int eax;
+	unsigned int ebx __attribute__ ((packed));
+	unsigned int ecx __attribute__ ((packed));
+	unsigned int edx __attribute__ ((packed));
+	unsigned int esi __attribute__ ((packed));
+	unsigned int edi __attribute__ ((packed));
+} SMMRegisters;
+
+
+#endif /* _UAPI_LINUX_TOSHIBA_H */
diff --git a/include/uapi/linux/tty.h b/include/uapi/linux/tty.h
new file mode 100644
index 0000000..dac199a
--- /dev/null
+++ b/include/uapi/linux/tty.h
@@ -0,0 +1,38 @@
+#ifndef _UAPI_LINUX_TTY_H
+#define _UAPI_LINUX_TTY_H
+
+/*
+ * 'tty.h' defines some structures used by tty_io.c and some defines.
+ */
+
+#define NR_LDISCS		30
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus */
+#define N_IRDA		11	/* Linux IrDa - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data */
+				/* cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15	/* Bluetooth HCI UART */
+#define N_GIGASET_M101	16	/* Siemens Gigaset M101 serial DECT adapter */
+#define N_SLCAN		17	/* Serial / USB serial CAN Adaptors */
+#define N_PPS		18	/* Pulse per Second */
+#define N_V253		19	/* Codec control over voice modem */
+#define N_CAIF		20      /* CAIF protocol for talking to modems */
+#define N_GSM0710	21	/* GSM 0710 Mux */
+#define N_TI_WL		22	/* for TI's WL BT, FM, GPS combo chips */
+#define N_TRACESINK	23	/* Trace data routing for MIPI P1149.7 */
+#define N_TRACEROUTER	24	/* Trace data routing for MIPI P1149.7 */
+
+#endif /* _UAPI_LINUX_TTY_H */
diff --git a/include/linux/tty_flags.h b/include/uapi/linux/tty_flags.h
similarity index 100%
rename from include/linux/tty_flags.h
rename to include/uapi/linux/tty_flags.h
diff --git a/include/uapi/linux/types.h b/include/uapi/linux/types.h
new file mode 100644
index 0000000..acf0979
--- /dev/null
+++ b/include/uapi/linux/types.h
@@ -0,0 +1,56 @@
+#ifndef _UAPI_LINUX_TYPES_H
+#define _UAPI_LINUX_TYPES_H
+
+#include <asm/types.h>
+
+#ifndef __ASSEMBLY__
+#ifndef	__KERNEL__
+#ifndef __EXPORTED_HEADERS__
+#warning "Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders"
+#endif /* __EXPORTED_HEADERS__ */
+#endif
+
+#include <linux/posix_types.h>
+
+
+/*
+ * Below are truly Linux-specific types that should never collide with
+ * any application/library that wants linux/types.h.
+ */
+
+#ifdef __CHECKER__
+#define __bitwise__ __attribute__((bitwise))
+#else
+#define __bitwise__
+#endif
+#ifdef __CHECK_ENDIAN__
+#define __bitwise __bitwise__
+#else
+#define __bitwise
+#endif
+
+typedef __u16 __bitwise __le16;
+typedef __u16 __bitwise __be16;
+typedef __u32 __bitwise __le32;
+typedef __u32 __bitwise __be32;
+typedef __u64 __bitwise __le64;
+typedef __u64 __bitwise __be64;
+
+typedef __u16 __bitwise __sum16;
+typedef __u32 __bitwise __wsum;
+
+/*
+ * aligned_u64 should be used in defining kernel<->userspace ABIs to avoid
+ * common 32/64-bit compat problems.
+ * 64-bit values align to 4-byte boundaries on x86_32 (and possibly other
+ * architectures) and to 8-byte boundaries on 64-bit architectures.  The new
+ * aligned_64 type enforces 8-byte alignment so that structs containing
+ * aligned_64 values have the same alignment on 32-bit and 64-bit architectures.
+ * No conversions are necessary between 32-bit user-space and a 64-bit kernel.
+ */
+#define __aligned_u64 __u64 __attribute__((aligned(8)))
+#define __aligned_be64 __be64 __attribute__((aligned(8)))
+#define __aligned_le64 __le64 __attribute__((aligned(8)))
+
+#endif /*  __ASSEMBLY__ */
+#endif /* _UAPI_LINUX_TYPES_H */
diff --git a/include/linux/udf_fs_i.h b/include/uapi/linux/udf_fs_i.h
similarity index 100%
rename from include/linux/udf_fs_i.h
rename to include/uapi/linux/udf_fs_i.h
diff --git a/include/uapi/linux/udp.h b/include/uapi/linux/udp.h
new file mode 100644
index 0000000..e2bcfd7
--- /dev/null
+++ b/include/uapi/linux/udp.h
@@ -0,0 +1,39 @@
+/*
+ * INET		An implementation of the TCP/IP protocol suite for the LINUX
+ *		operating system.  INET is implemented using the  BSD Socket
+ *		interface as the means of communication with the user level.
+ *
+ *		Definitions for the UDP protocol.
+ *
+ * Version:	@(#)udp.h	1.0.2	04/28/93
+ *
+ * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI_LINUX_UDP_H
+#define _UAPI_LINUX_UDP_H
+
+#include <linux/types.h>
+
+struct udphdr {
+	__be16	source;
+	__be16	dest;
+	__be16	len;
+	__sum16	check;
+};
+
+/* UDP socket options */
+#define UDP_CORK	1	/* Never send partially complete segments */
+#define UDP_ENCAP	100	/* Set the socket to accept encapsulated packets */
+
+/* UDP encapsulation types */
+#define UDP_ENCAP_ESPINUDP_NON_IKE	1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
+#define UDP_ENCAP_ESPINUDP	2 /* draft-ietf-ipsec-udp-encaps-06 */
+#define UDP_ENCAP_L2TPINUDP	3 /* rfc2661 */
+
+
+#endif /* _UAPI_LINUX_UDP_H */
diff --git a/include/linux/uhid.h b/include/uapi/linux/uhid.h
similarity index 100%
rename from include/linux/uhid.h
rename to include/uapi/linux/uhid.h
diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h
new file mode 100644
index 0000000..fe46431
--- /dev/null
+++ b/include/uapi/linux/uinput.h
@@ -0,0 +1,137 @@
+/*
+ *  User level driver support for input subsystem
+ *
+ * Heavily based on evdev.c by Vojtech Pavlik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
+ *
+ * Changes/Revisions:
+ *	0.3	24/05/2006 (Anssi Hannula <anssi.hannulagmail.com>)
+ *		- update ff support for the changes in kernel interface
+ *		- add UINPUT_VERSION
+ *	0.2	16/10/2004 (Micah Dowty <micah@navi.cx>)
+ *		- added force feedback support
+ *             - added UI_SET_PHYS
+ *	0.1	20/06/2002
+ *		- first public version
+ */
+#ifndef _UAPI__UINPUT_H_
+#define _UAPI__UINPUT_H_
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+#define UINPUT_VERSION		3
+
+
+struct uinput_ff_upload {
+	__u32			request_id;
+	__s32			retval;
+	struct ff_effect	effect;
+	struct ff_effect	old;
+};
+
+struct uinput_ff_erase {
+	__u32			request_id;
+	__s32			retval;
+	__u32			effect_id;
+};
+
+/* ioctl */
+#define UINPUT_IOCTL_BASE	'U'
+#define UI_DEV_CREATE		_IO(UINPUT_IOCTL_BASE, 1)
+#define UI_DEV_DESTROY		_IO(UINPUT_IOCTL_BASE, 2)
+
+#define UI_SET_EVBIT		_IOW(UINPUT_IOCTL_BASE, 100, int)
+#define UI_SET_KEYBIT		_IOW(UINPUT_IOCTL_BASE, 101, int)
+#define UI_SET_RELBIT		_IOW(UINPUT_IOCTL_BASE, 102, int)
+#define UI_SET_ABSBIT		_IOW(UINPUT_IOCTL_BASE, 103, int)
+#define UI_SET_MSCBIT		_IOW(UINPUT_IOCTL_BASE, 104, int)
+#define UI_SET_LEDBIT		_IOW(UINPUT_IOCTL_BASE, 105, int)
+#define UI_SET_SNDBIT		_IOW(UINPUT_IOCTL_BASE, 106, int)
+#define UI_SET_FFBIT		_IOW(UINPUT_IOCTL_BASE, 107, int)
+#define UI_SET_PHYS		_IOW(UINPUT_IOCTL_BASE, 108, char*)
+#define UI_SET_SWBIT		_IOW(UINPUT_IOCTL_BASE, 109, int)
+#define UI_SET_PROPBIT		_IOW(UINPUT_IOCTL_BASE, 110, int)
+
+#define UI_BEGIN_FF_UPLOAD	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
+#define UI_END_FF_UPLOAD	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
+#define UI_BEGIN_FF_ERASE	_IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase)
+#define UI_END_FF_ERASE		_IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase)
+
+/*
+ * To write a force-feedback-capable driver, the upload_effect
+ * and erase_effect callbacks in input_dev must be implemented.
+ * The uinput driver will generate a fake input event when one of
+ * these callbacks are invoked. The userspace code then uses
+ * ioctls to retrieve additional parameters and send the return code.
+ * The callback blocks until this return code is sent.
+ *
+ * The described callback mechanism is only used if ff_effects_max
+ * is set.
+ *
+ * To implement upload_effect():
+ *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_UPLOAD.
+ *      A request ID will be given in 'value'.
+ *   2. Allocate a uinput_ff_upload struct, fill in request_id with
+ *      the 'value' from the EV_UINPUT event.
+ *   3. Issue a UI_BEGIN_FF_UPLOAD ioctl, giving it the
+ *      uinput_ff_upload struct. It will be filled in with the
+ *      ff_effects passed to upload_effect().
+ *   4. Perform the effect upload, and place a return code back into
+        the uinput_ff_upload struct.
+ *   5. Issue a UI_END_FF_UPLOAD ioctl, also giving it the
+ *      uinput_ff_upload_effect struct. This will complete execution
+ *      of our upload_effect() handler.
+ *
+ * To implement erase_effect():
+ *   1. Wait for an event with type == EV_UINPUT and code == UI_FF_ERASE.
+ *      A request ID will be given in 'value'.
+ *   2. Allocate a uinput_ff_erase struct, fill in request_id with
+ *      the 'value' from the EV_UINPUT event.
+ *   3. Issue a UI_BEGIN_FF_ERASE ioctl, giving it the
+ *      uinput_ff_erase struct. It will be filled in with the
+ *      effect ID passed to erase_effect().
+ *   4. Perform the effect erasure, and place a return code back
+ *      into the uinput_ff_erase struct.
+ *   5. Issue a UI_END_FF_ERASE ioctl, also giving it the
+ *      uinput_ff_erase_effect struct. This will complete execution
+ *      of our erase_effect() handler.
+ */
+
+/*
+ * This is the new event type, used only by uinput.
+ * 'code' is UI_FF_UPLOAD or UI_FF_ERASE, and 'value'
+ * is the unique request ID. This number was picked
+ * arbitrarily, above EV_MAX (since the input system
+ * never sees it) but in the range of a 16-bit int.
+ */
+#define EV_UINPUT		0x0101
+#define UI_FF_UPLOAD		1
+#define UI_FF_ERASE		2
+
+#define UINPUT_MAX_NAME_SIZE	80
+struct uinput_user_dev {
+	char name[UINPUT_MAX_NAME_SIZE];
+	struct input_id id;
+	__u32 ff_effects_max;
+	__s32 absmax[ABS_CNT];
+	__s32 absmin[ABS_CNT];
+	__s32 absfuzz[ABS_CNT];
+	__s32 absflat[ABS_CNT];
+};
+#endif /* _UAPI__UINPUT_H_ */
diff --git a/include/uapi/linux/uio.h b/include/uapi/linux/uio.h
new file mode 100644
index 0000000..2731d56
--- /dev/null
+++ b/include/uapi/linux/uio.h
@@ -0,0 +1,30 @@
+/*
+ *	Berkeley style UIO structures	-	Alan Cox 1994.
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+#ifndef _UAPI__LINUX_UIO_H
+#define _UAPI__LINUX_UIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+struct iovec
+{
+	void __user *iov_base;	/* BSD uses caddr_t (1003.1g requires void *) */
+	__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
+};
+
+/*
+ *	UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
+ */
+ 
+#define UIO_FASTIOV	8
+#define UIO_MAXIOV	1024
+
+
+#endif /* _UAPI__LINUX_UIO_H */
diff --git a/include/linux/ultrasound.h b/include/uapi/linux/ultrasound.h
similarity index 100%
rename from include/linux/ultrasound.h
rename to include/uapi/linux/ultrasound.h
diff --git a/include/linux/un.h b/include/uapi/linux/un.h
similarity index 100%
rename from include/linux/un.h
rename to include/uapi/linux/un.h
diff --git a/include/linux/unistd.h b/include/uapi/linux/unistd.h
similarity index 100%
rename from include/linux/unistd.h
rename to include/uapi/linux/unistd.h
diff --git a/include/linux/unix_diag.h b/include/uapi/linux/unix_diag.h
similarity index 100%
rename from include/linux/unix_diag.h
rename to include/uapi/linux/unix_diag.h
diff --git a/include/uapi/linux/usbdevice_fs.h b/include/uapi/linux/usbdevice_fs.h
new file mode 100644
index 0000000..0c65e4b
--- /dev/null
+++ b/include/uapi/linux/usbdevice_fs.h
@@ -0,0 +1,180 @@
+/*****************************************************************************/
+
+/*
+ *	usbdevice_fs.h  --  USB device file system.
+ *
+ *	Copyright (C) 2000
+ *          Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ *
+ *	You should have received a copy of the GNU General Public License
+ *	along with this program; if not, write to the Free Software
+ *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History:
+ *   0.1  04.01.2000  Created
+ */
+
+/*****************************************************************************/
+
+#ifndef _UAPI_LINUX_USBDEVICE_FS_H
+#define _UAPI_LINUX_USBDEVICE_FS_H
+
+#include <linux/types.h>
+#include <linux/magic.h>
+
+/* --------------------------------------------------------------------- */
+
+/* usbdevfs ioctl codes */
+
+struct usbdevfs_ctrltransfer {
+	__u8 bRequestType;
+	__u8 bRequest;
+	__u16 wValue;
+	__u16 wIndex;
+	__u16 wLength;
+	__u32 timeout;  /* in milliseconds */
+ 	void __user *data;
+};
+
+struct usbdevfs_bulktransfer {
+	unsigned int ep;
+	unsigned int len;
+	unsigned int timeout; /* in milliseconds */
+	void __user *data;
+};
+
+struct usbdevfs_setinterface {
+	unsigned int interface;
+	unsigned int altsetting;
+};
+
+struct usbdevfs_disconnectsignal {
+	unsigned int signr;
+	void __user *context;
+};
+
+#define USBDEVFS_MAXDRIVERNAME 255
+
+struct usbdevfs_getdriver {
+	unsigned int interface;
+	char driver[USBDEVFS_MAXDRIVERNAME + 1];
+};
+
+struct usbdevfs_connectinfo {
+	unsigned int devnum;
+	unsigned char slow;
+};
+
+#define USBDEVFS_URB_SHORT_NOT_OK	0x01
+#define USBDEVFS_URB_ISO_ASAP		0x02
+#define USBDEVFS_URB_BULK_CONTINUATION	0x04
+#define USBDEVFS_URB_NO_FSBR		0x20
+#define USBDEVFS_URB_ZERO_PACKET	0x40
+#define USBDEVFS_URB_NO_INTERRUPT	0x80
+
+#define USBDEVFS_URB_TYPE_ISO		   0
+#define USBDEVFS_URB_TYPE_INTERRUPT	   1
+#define USBDEVFS_URB_TYPE_CONTROL	   2
+#define USBDEVFS_URB_TYPE_BULK		   3
+
+struct usbdevfs_iso_packet_desc {
+	unsigned int length;
+	unsigned int actual_length;
+	unsigned int status;
+};
+
+struct usbdevfs_urb {
+	unsigned char type;
+	unsigned char endpoint;
+	int status;
+	unsigned int flags;
+	void __user *buffer;
+	int buffer_length;
+	int actual_length;
+	int start_frame;
+	int number_of_packets;
+	int error_count;
+	unsigned int signr;	/* signal to be sent on completion,
+				  or 0 if none should be sent. */
+	void __user *usercontext;
+	struct usbdevfs_iso_packet_desc iso_frame_desc[0];
+};
+
+/* ioctls for talking directly to drivers */
+struct usbdevfs_ioctl {
+	int	ifno;		/* interface 0..N ; negative numbers reserved */
+	int	ioctl_code;	/* MUST encode size + direction of data so the
+				 * macros in <asm/ioctl.h> give correct values */
+	void __user *data;	/* param buffer (in, or out) */
+};
+
+/* You can do most things with hubs just through control messages,
+ * except find out what device connects to what port. */
+struct usbdevfs_hub_portinfo {
+	char nports;		/* number of downstream ports in this hub */
+	char port [127];	/* e.g. port 3 connects to device 27 */
+};
+
+/* Device capability flags */
+#define USBDEVFS_CAP_ZERO_PACKET		0x01
+#define USBDEVFS_CAP_BULK_CONTINUATION		0x02
+#define USBDEVFS_CAP_NO_PACKET_SIZE_LIM		0x04
+#define USBDEVFS_CAP_BULK_SCATTER_GATHER	0x08
+
+/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
+
+/* disconnect-and-claim if the driver matches the driver field */
+#define USBDEVFS_DISCONNECT_CLAIM_IF_DRIVER	0x01
+/* disconnect-and-claim except when the driver matches the driver field */
+#define USBDEVFS_DISCONNECT_CLAIM_EXCEPT_DRIVER	0x02
+
+struct usbdevfs_disconnect_claim {
+	unsigned int interface;
+	unsigned int flags;
+	char driver[USBDEVFS_MAXDRIVERNAME + 1];
+};
+
+
+#define USBDEVFS_CONTROL           _IOWR('U', 0, struct usbdevfs_ctrltransfer)
+#define USBDEVFS_CONTROL32           _IOWR('U', 0, struct usbdevfs_ctrltransfer32)
+#define USBDEVFS_BULK              _IOWR('U', 2, struct usbdevfs_bulktransfer)
+#define USBDEVFS_BULK32              _IOWR('U', 2, struct usbdevfs_bulktransfer32)
+#define USBDEVFS_RESETEP           _IOR('U', 3, unsigned int)
+#define USBDEVFS_SETINTERFACE      _IOR('U', 4, struct usbdevfs_setinterface)
+#define USBDEVFS_SETCONFIGURATION  _IOR('U', 5, unsigned int)
+#define USBDEVFS_GETDRIVER         _IOW('U', 8, struct usbdevfs_getdriver)
+#define USBDEVFS_SUBMITURB         _IOR('U', 10, struct usbdevfs_urb)
+#define USBDEVFS_SUBMITURB32       _IOR('U', 10, struct usbdevfs_urb32)
+#define USBDEVFS_DISCARDURB        _IO('U', 11)
+#define USBDEVFS_REAPURB           _IOW('U', 12, void *)
+#define USBDEVFS_REAPURB32         _IOW('U', 12, __u32)
+#define USBDEVFS_REAPURBNDELAY     _IOW('U', 13, void *)
+#define USBDEVFS_REAPURBNDELAY32   _IOW('U', 13, __u32)
+#define USBDEVFS_DISCSIGNAL        _IOR('U', 14, struct usbdevfs_disconnectsignal)
+#define USBDEVFS_DISCSIGNAL32      _IOR('U', 14, struct usbdevfs_disconnectsignal32)
+#define USBDEVFS_CLAIMINTERFACE    _IOR('U', 15, unsigned int)
+#define USBDEVFS_RELEASEINTERFACE  _IOR('U', 16, unsigned int)
+#define USBDEVFS_CONNECTINFO       _IOW('U', 17, struct usbdevfs_connectinfo)
+#define USBDEVFS_IOCTL             _IOWR('U', 18, struct usbdevfs_ioctl)
+#define USBDEVFS_IOCTL32           _IOWR('U', 18, struct usbdevfs_ioctl32)
+#define USBDEVFS_HUB_PORTINFO      _IOR('U', 19, struct usbdevfs_hub_portinfo)
+#define USBDEVFS_RESET             _IO('U', 20)
+#define USBDEVFS_CLEAR_HALT        _IOR('U', 21, unsigned int)
+#define USBDEVFS_DISCONNECT        _IO('U', 22)
+#define USBDEVFS_CONNECT           _IO('U', 23)
+#define USBDEVFS_CLAIM_PORT        _IOR('U', 24, unsigned int)
+#define USBDEVFS_RELEASE_PORT      _IOR('U', 25, unsigned int)
+#define USBDEVFS_GET_CAPABILITIES  _IOR('U', 26, __u32)
+#define USBDEVFS_DISCONNECT_CLAIM  _IOR('U', 27, struct usbdevfs_disconnect_claim)
+
+#endif /* _UAPI_LINUX_USBDEVICE_FS_H */
diff --git a/include/linux/utime.h b/include/uapi/linux/utime.h
similarity index 100%
rename from include/linux/utime.h
rename to include/uapi/linux/utime.h
diff --git a/include/uapi/linux/utsname.h b/include/uapi/linux/utsname.h
new file mode 100644
index 0000000..872c2df
--- /dev/null
+++ b/include/uapi/linux/utsname.h
@@ -0,0 +1,34 @@
+#ifndef _UAPI_LINUX_UTSNAME_H
+#define _UAPI_LINUX_UTSNAME_H
+
+#define __OLD_UTS_LEN 8
+
+struct oldold_utsname {
+	char sysname[9];
+	char nodename[9];
+	char release[9];
+	char version[9];
+	char machine[9];
+};
+
+#define __NEW_UTS_LEN 64
+
+struct old_utsname {
+	char sysname[65];
+	char nodename[65];
+	char release[65];
+	char version[65];
+	char machine[65];
+};
+
+struct new_utsname {
+	char sysname[__NEW_UTS_LEN + 1];
+	char nodename[__NEW_UTS_LEN + 1];
+	char release[__NEW_UTS_LEN + 1];
+	char version[__NEW_UTS_LEN + 1];
+	char machine[__NEW_UTS_LEN + 1];
+	char domainname[__NEW_UTS_LEN + 1];
+};
+
+
+#endif /* _UAPI_LINUX_UTSNAME_H */
diff --git a/include/uapi/linux/uuid.h b/include/uapi/linux/uuid.h
new file mode 100644
index 0000000..786f077
--- /dev/null
+++ b/include/uapi/linux/uuid.h
@@ -0,0 +1,58 @@
+/*
+ * UUID/GUID definition
+ *
+ * Copyright (C) 2010, Intel Corp.
+ *	Huang Ying <ying.huang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _UAPI_LINUX_UUID_H_
+#define _UAPI_LINUX_UUID_H_
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+typedef struct {
+	__u8 b[16];
+} uuid_le;
+
+typedef struct {
+	__u8 b[16];
+} uuid_be;
+
+#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
+((uuid_le)								\
+{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
+   (b) & 0xff, ((b) >> 8) & 0xff,					\
+   (c) & 0xff, ((c) >> 8) & 0xff,					\
+   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define UUID_BE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7)		\
+((uuid_be)								\
+{{ ((a) >> 24) & 0xff, ((a) >> 16) & 0xff, ((a) >> 8) & 0xff, (a) & 0xff, \
+   ((b) >> 8) & 0xff, (b) & 0xff,					\
+   ((c) >> 8) & 0xff, (c) & 0xff,					\
+   (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) }})
+
+#define NULL_UUID_LE							\
+	UUID_LE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
+		0x00, 0x00, 0x00, 0x00)
+
+#define NULL_UUID_BE							\
+	UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00,	\
+		0x00, 0x00, 0x00, 0x00)
+
+
+#endif /* _UAPI_LINUX_UUID_H_ */
diff --git a/include/linux/uvcvideo.h b/include/uapi/linux/uvcvideo.h
similarity index 100%
rename from include/linux/uvcvideo.h
rename to include/uapi/linux/uvcvideo.h
diff --git a/include/linux/v4l2-common.h b/include/uapi/linux/v4l2-common.h
similarity index 100%
rename from include/linux/v4l2-common.h
rename to include/uapi/linux/v4l2-common.h
diff --git a/include/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
similarity index 100%
rename from include/linux/v4l2-controls.h
rename to include/uapi/linux/v4l2-controls.h
diff --git a/include/linux/v4l2-dv-timings.h b/include/uapi/linux/v4l2-dv-timings.h
similarity index 100%
rename from include/linux/v4l2-dv-timings.h
rename to include/uapi/linux/v4l2-dv-timings.h
diff --git a/include/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h
similarity index 100%
rename from include/linux/v4l2-mediabus.h
rename to include/uapi/linux/v4l2-mediabus.h
diff --git a/include/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h
similarity index 100%
rename from include/linux/v4l2-subdev.h
rename to include/uapi/linux/v4l2-subdev.h
diff --git a/include/linux/veth.h b/include/uapi/linux/veth.h
similarity index 100%
rename from include/linux/veth.h
rename to include/uapi/linux/veth.h
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
new file mode 100644
index 0000000..4758d1b
--- /dev/null
+++ b/include/uapi/linux/vfio.h
@@ -0,0 +1,368 @@
+/*
+ * VFIO API definition
+ *
+ * Copyright (C) 2012 Red Hat, Inc.  All rights reserved.
+ *     Author: Alex Williamson <alex.williamson@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _UAPIVFIO_H
+#define _UAPIVFIO_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define VFIO_API_VERSION	0
+
+
+/* Kernel & User level defines for VFIO IOCTLs. */
+
+/* Extensions */
+
+#define VFIO_TYPE1_IOMMU		1
+
+/*
+ * The IOCTL interface is designed for extensibility by embedding the
+ * structure length (argsz) and flags into structures passed between
+ * kernel and userspace.  We therefore use the _IO() macro for these
+ * defines to avoid implicitly embedding a size into the ioctl request.
+ * As structure fields are added, argsz will increase to match and flag
+ * bits will be defined to indicate additional fields with valid data.
+ * It's *always* the caller's responsibility to indicate the size of
+ * the structure passed by setting argsz appropriately.
+ */
+
+#define VFIO_TYPE	(';')
+#define VFIO_BASE	100
+
+/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */
+
+/**
+ * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0)
+ *
+ * Report the version of the VFIO API.  This allows us to bump the entire
+ * API version should we later need to add or change features in incompatible
+ * ways.
+ * Return: VFIO_API_VERSION
+ * Availability: Always
+ */
+#define VFIO_GET_API_VERSION		_IO(VFIO_TYPE, VFIO_BASE + 0)
+
+/**
+ * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32)
+ *
+ * Check whether an extension is supported.
+ * Return: 0 if not supported, 1 (or some other positive integer) if supported.
+ * Availability: Always
+ */
+#define VFIO_CHECK_EXTENSION		_IO(VFIO_TYPE, VFIO_BASE + 1)
+
+/**
+ * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32)
+ *
+ * Set the iommu to the given type.  The type must be supported by an
+ * iommu driver as verified by calling CHECK_EXTENSION using the same
+ * type.  A group must be set to this file descriptor before this
+ * ioctl is available.  The IOMMU interfaces enabled by this call are
+ * specific to the value set.
+ * Return: 0 on success, -errno on failure
+ * Availability: When VFIO group attached
+ */
+#define VFIO_SET_IOMMU			_IO(VFIO_TYPE, VFIO_BASE + 2)
+
+/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */
+
+/**
+ * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3,
+ *						struct vfio_group_status)
+ *
+ * Retrieve information about the group.  Fills in provided
+ * struct vfio_group_info.  Caller sets argsz.
+ * Return: 0 on succes, -errno on failure.
+ * Availability: Always
+ */
+struct vfio_group_status {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_GROUP_FLAGS_VIABLE		(1 << 0)
+#define VFIO_GROUP_FLAGS_CONTAINER_SET	(1 << 1)
+};
+#define VFIO_GROUP_GET_STATUS		_IO(VFIO_TYPE, VFIO_BASE + 3)
+
+/**
+ * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32)
+ *
+ * Set the container for the VFIO group to the open VFIO file
+ * descriptor provided.  Groups may only belong to a single
+ * container.  Containers may, at their discretion, support multiple
+ * groups.  Only when a container is set are all of the interfaces
+ * of the VFIO file descriptor and the VFIO group file descriptor
+ * available to the user.
+ * Return: 0 on success, -errno on failure.
+ * Availability: Always
+ */
+#define VFIO_GROUP_SET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 4)
+
+/**
+ * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5)
+ *
+ * Remove the group from the attached container.  This is the
+ * opposite of the SET_CONTAINER call and returns the group to
+ * an initial state.  All device file descriptors must be released
+ * prior to calling this interface.  When removing the last group
+ * from a container, the IOMMU will be disabled and all state lost,
+ * effectively also returning the VFIO file descriptor to an initial
+ * state.
+ * Return: 0 on success, -errno on failure.
+ * Availability: When attached to container
+ */
+#define VFIO_GROUP_UNSET_CONTAINER	_IO(VFIO_TYPE, VFIO_BASE + 5)
+
+/**
+ * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char)
+ *
+ * Return a new file descriptor for the device object described by
+ * the provided string.  The string should match a device listed in
+ * the devices subdirectory of the IOMMU group sysfs entry.  The
+ * group containing the device must already be added to this context.
+ * Return: new file descriptor on success, -errno on failure.
+ * Availability: When attached to container
+ */
+#define VFIO_GROUP_GET_DEVICE_FD	_IO(VFIO_TYPE, VFIO_BASE + 6)
+
+/* --------------- IOCTLs for DEVICE file descriptors --------------- */
+
+/**
+ * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7,
+ *						struct vfio_device_info)
+ *
+ * Retrieve information about the device.  Fills in provided
+ * struct vfio_device_info.  Caller sets argsz.
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_device_info {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_DEVICE_FLAGS_RESET	(1 << 0)	/* Device supports reset */
+#define VFIO_DEVICE_FLAGS_PCI	(1 << 1)	/* vfio-pci device */
+	__u32	num_regions;	/* Max region index + 1 */
+	__u32	num_irqs;	/* Max IRQ index + 1 */
+};
+#define VFIO_DEVICE_GET_INFO		_IO(VFIO_TYPE, VFIO_BASE + 7)
+
+/**
+ * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
+ *				       struct vfio_region_info)
+ *
+ * Retrieve information about a device region.  Caller provides
+ * struct vfio_region_info with index value set.  Caller sets argsz.
+ * Implementation of region mapping is bus driver specific.  This is
+ * intended to describe MMIO, I/O port, as well as bus specific
+ * regions (ex. PCI config space).  Zero sized regions may be used
+ * to describe unimplemented regions (ex. unimplemented PCI BARs).
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_region_info {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_REGION_INFO_FLAG_READ	(1 << 0) /* Region supports read */
+#define VFIO_REGION_INFO_FLAG_WRITE	(1 << 1) /* Region supports write */
+#define VFIO_REGION_INFO_FLAG_MMAP	(1 << 2) /* Region supports mmap */
+	__u32	index;		/* Region index */
+	__u32	resv;		/* Reserved for alignment */
+	__u64	size;		/* Region size (bytes) */
+	__u64	offset;		/* Region offset from start of device fd */
+};
+#define VFIO_DEVICE_GET_REGION_INFO	_IO(VFIO_TYPE, VFIO_BASE + 8)
+
+/**
+ * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
+ *				    struct vfio_irq_info)
+ *
+ * Retrieve information about a device IRQ.  Caller provides
+ * struct vfio_irq_info with index value set.  Caller sets argsz.
+ * Implementation of IRQ mapping is bus driver specific.  Indexes
+ * using multiple IRQs are primarily intended to support MSI-like
+ * interrupt blocks.  Zero count irq blocks may be used to describe
+ * unimplemented interrupt types.
+ *
+ * The EVENTFD flag indicates the interrupt index supports eventfd based
+ * signaling.
+ *
+ * The MASKABLE flags indicates the index supports MASK and UNMASK
+ * actions described below.
+ *
+ * AUTOMASKED indicates that after signaling, the interrupt line is
+ * automatically masked by VFIO and the user needs to unmask the line
+ * to receive new interrupts.  This is primarily intended to distinguish
+ * level triggered interrupts.
+ *
+ * The NORESIZE flag indicates that the interrupt lines within the index
+ * are setup as a set and new subindexes cannot be enabled without first
+ * disabling the entire index.  This is used for interrupts like PCI MSI
+ * and MSI-X where the driver may only use a subset of the available
+ * indexes, but VFIO needs to enable a specific number of vectors
+ * upfront.  In the case of MSI-X, where the user can enable MSI-X and
+ * then add and unmask vectors, it's up to userspace to make the decision
+ * whether to allocate the maximum supported number of vectors or tear
+ * down setup and incrementally increase the vectors as each is enabled.
+ */
+struct vfio_irq_info {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_IRQ_INFO_EVENTFD		(1 << 0)
+#define VFIO_IRQ_INFO_MASKABLE		(1 << 1)
+#define VFIO_IRQ_INFO_AUTOMASKED	(1 << 2)
+#define VFIO_IRQ_INFO_NORESIZE		(1 << 3)
+	__u32	index;		/* IRQ index */
+	__u32	count;		/* Number of IRQs within this index */
+};
+#define VFIO_DEVICE_GET_IRQ_INFO	_IO(VFIO_TYPE, VFIO_BASE + 9)
+
+/**
+ * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set)
+ *
+ * Set signaling, masking, and unmasking of interrupts.  Caller provides
+ * struct vfio_irq_set with all fields set.  'start' and 'count' indicate
+ * the range of subindexes being specified.
+ *
+ * The DATA flags specify the type of data provided.  If DATA_NONE, the
+ * operation performs the specified action immediately on the specified
+ * interrupt(s).  For example, to unmask AUTOMASKED interrupt [0,0]:
+ * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1.
+ *
+ * DATA_BOOL allows sparse support for the same on arrays of interrupts.
+ * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]):
+ * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3,
+ * data = {1,0,1}
+ *
+ * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd.
+ * A value of -1 can be used to either de-assign interrupts if already
+ * assigned or skip un-assigned interrupts.  For example, to set an eventfd
+ * to be trigger for interrupts [0,0] and [0,2]:
+ * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3,
+ * data = {fd1, -1, fd2}
+ * If index [0,1] is previously set, two count = 1 ioctls calls would be
+ * required to set [0,0] and [0,2] without changing [0,1].
+ *
+ * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used
+ * with ACTION_TRIGGER to perform kernel level interrupt loopback testing
+ * from userspace (ie. simulate hardware triggering).
+ *
+ * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER
+ * enables the interrupt index for the device.  Individual subindex interrupts
+ * can be disabled using the -1 value for DATA_EVENTFD or the index can be
+ * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
+ *
+ * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while
+ * ACTION_TRIGGER specifies kernel->user signaling.
+ */
+struct vfio_irq_set {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_IRQ_SET_DATA_NONE		(1 << 0) /* Data not present */
+#define VFIO_IRQ_SET_DATA_BOOL		(1 << 1) /* Data is bool (u8) */
+#define VFIO_IRQ_SET_DATA_EVENTFD	(1 << 2) /* Data is eventfd (s32) */
+#define VFIO_IRQ_SET_ACTION_MASK	(1 << 3) /* Mask interrupt */
+#define VFIO_IRQ_SET_ACTION_UNMASK	(1 << 4) /* Unmask interrupt */
+#define VFIO_IRQ_SET_ACTION_TRIGGER	(1 << 5) /* Trigger interrupt */
+	__u32	index;
+	__u32	start;
+	__u32	count;
+	__u8	data[];
+};
+#define VFIO_DEVICE_SET_IRQS		_IO(VFIO_TYPE, VFIO_BASE + 10)
+
+#define VFIO_IRQ_SET_DATA_TYPE_MASK	(VFIO_IRQ_SET_DATA_NONE | \
+					 VFIO_IRQ_SET_DATA_BOOL | \
+					 VFIO_IRQ_SET_DATA_EVENTFD)
+#define VFIO_IRQ_SET_ACTION_TYPE_MASK	(VFIO_IRQ_SET_ACTION_MASK | \
+					 VFIO_IRQ_SET_ACTION_UNMASK | \
+					 VFIO_IRQ_SET_ACTION_TRIGGER)
+/**
+ * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11)
+ *
+ * Reset a device.
+ */
+#define VFIO_DEVICE_RESET		_IO(VFIO_TYPE, VFIO_BASE + 11)
+
+/*
+ * The VFIO-PCI bus driver makes use of the following fixed region and
+ * IRQ index mapping.  Unimplemented regions return a size of zero.
+ * Unimplemented IRQ types return a count of zero.
+ */
+
+enum {
+	VFIO_PCI_BAR0_REGION_INDEX,
+	VFIO_PCI_BAR1_REGION_INDEX,
+	VFIO_PCI_BAR2_REGION_INDEX,
+	VFIO_PCI_BAR3_REGION_INDEX,
+	VFIO_PCI_BAR4_REGION_INDEX,
+	VFIO_PCI_BAR5_REGION_INDEX,
+	VFIO_PCI_ROM_REGION_INDEX,
+	VFIO_PCI_CONFIG_REGION_INDEX,
+	VFIO_PCI_NUM_REGIONS
+};
+
+enum {
+	VFIO_PCI_INTX_IRQ_INDEX,
+	VFIO_PCI_MSI_IRQ_INDEX,
+	VFIO_PCI_MSIX_IRQ_INDEX,
+	VFIO_PCI_NUM_IRQS
+};
+
+/* -------- API for Type1 VFIO IOMMU -------- */
+
+/**
+ * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info)
+ *
+ * Retrieve information about the IOMMU object. Fills in provided
+ * struct vfio_iommu_info. Caller sets argsz.
+ *
+ * XXX Should we do these by CHECK_EXTENSION too?
+ */
+struct vfio_iommu_type1_info {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_IOMMU_INFO_PGSIZES (1 << 0)	/* supported page sizes info */
+	__u64	iova_pgsizes;		/* Bitmap of supported page sizes */
+};
+
+#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
+
+/**
+ * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map)
+ *
+ * Map process virtual addresses to IO virtual addresses using the
+ * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
+ */
+struct vfio_iommu_type1_dma_map {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_DMA_MAP_FLAG_READ (1 << 0)		/* readable from device */
+#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1)	/* writable from device */
+	__u64	vaddr;				/* Process virtual address */
+	__u64	iova;				/* IO virtual address */
+	__u64	size;				/* Size of mapping (bytes) */
+};
+
+#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
+
+/**
+ * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap)
+ *
+ * Unmap IO virtual addresses using the provided struct vfio_dma_unmap.
+ * Caller sets argsz.
+ */
+struct vfio_iommu_type1_dma_unmap {
+	__u32	argsz;
+	__u32	flags;
+	__u64	iova;				/* IO virtual address */
+	__u64	size;				/* Size of mapping (bytes) */
+};
+
+#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
+
+#endif /* _UAPIVFIO_H */
diff --git a/include/linux/vhost.h b/include/uapi/linux/vhost.h
similarity index 100%
rename from include/linux/vhost.h
rename to include/uapi/linux/vhost.h
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
new file mode 100644
index 0000000..57bfa59
--- /dev/null
+++ b/include/uapi/linux/videodev2.h
@@ -0,0 +1,1998 @@
+/*
+ *  Video for Linux Two header file
+ *
+ *  Copyright (C) 1999-2012 the contributors
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  Alternatively you can redistribute this file under the terms of the
+ *  BSD license as stated below:
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *  3. The names of its contributors may not be used to endorse or promote
+ *     products derived from this software without specific prior written
+ *     permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *  TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *  PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *	Header file for v4l or V4L2 drivers and applications
+ * with public API.
+ * All kernel-specific stuff were moved to media/v4l2-dev.h, so
+ * no #if __KERNEL tests are allowed here
+ *
+ *	See http://linuxtv.org for more info
+ *
+ *	Author: Bill Dirks <bill@thedirks.org>
+ *		Justin Schoeman
+ *              Hans Verkuil <hverkuil@xs4all.nl>
+ *		et al.
+ */
+#ifndef _UAPI__LINUX_VIDEODEV2_H
+#define _UAPI__LINUX_VIDEODEV2_H
+
+#ifndef __KERNEL__
+#include <sys/time.h>
+#endif
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/v4l2-common.h>
+#include <linux/v4l2-controls.h>
+
+/*
+ * Common stuff for both V4L1 and V4L2
+ * Moved from videodev.h
+ */
+#define VIDEO_MAX_FRAME               32
+#define VIDEO_MAX_PLANES               8
+
+#ifndef __KERNEL__
+
+/* These defines are V4L1 specific and should not be used with the V4L2 API!
+   They will be removed from this header in the future. */
+
+#define VID_TYPE_CAPTURE	1	/* Can capture */
+#define VID_TYPE_TUNER		2	/* Can tune */
+#define VID_TYPE_TELETEXT	4	/* Does teletext */
+#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
+#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
+#define VID_TYPE_CLIPPING	32	/* Can clip */
+#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
+#define VID_TYPE_SCALES		128	/* Scalable */
+#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
+#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
+#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
+#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
+#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
+#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
+#endif
+
+/*
+ *	M I S C E L L A N E O U S
+ */
+
+/*  Four-character-code (FOURCC) */
+#define v4l2_fourcc(a, b, c, d)\
+	((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24))
+
+/*
+ *	E N U M S
+ */
+enum v4l2_field {
+	V4L2_FIELD_ANY           = 0, /* driver can choose from none,
+					 top, bottom, interlaced
+					 depending on whatever it thinks
+					 is approximate ... */
+	V4L2_FIELD_NONE          = 1, /* this device has no fields ... */
+	V4L2_FIELD_TOP           = 2, /* top field only */
+	V4L2_FIELD_BOTTOM        = 3, /* bottom field only */
+	V4L2_FIELD_INTERLACED    = 4, /* both fields interlaced */
+	V4L2_FIELD_SEQ_TB        = 5, /* both fields sequential into one
+					 buffer, top-bottom order */
+	V4L2_FIELD_SEQ_BT        = 6, /* same as above + bottom-top order */
+	V4L2_FIELD_ALTERNATE     = 7, /* both fields alternating into
+					 separate buffers */
+	V4L2_FIELD_INTERLACED_TB = 8, /* both fields interlaced, top field
+					 first and the top field is
+					 transmitted first */
+	V4L2_FIELD_INTERLACED_BT = 9, /* both fields interlaced, top field
+					 first and the bottom field is
+					 transmitted first */
+};
+#define V4L2_FIELD_HAS_TOP(field)	\
+	((field) == V4L2_FIELD_TOP 	||\
+	 (field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_INTERLACED_TB ||\
+	 (field) == V4L2_FIELD_INTERLACED_BT ||\
+	 (field) == V4L2_FIELD_SEQ_TB	||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+#define V4L2_FIELD_HAS_BOTTOM(field)	\
+	((field) == V4L2_FIELD_BOTTOM 	||\
+	 (field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_INTERLACED_TB ||\
+	 (field) == V4L2_FIELD_INTERLACED_BT ||\
+	 (field) == V4L2_FIELD_SEQ_TB	||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+#define V4L2_FIELD_HAS_BOTH(field)	\
+	((field) == V4L2_FIELD_INTERLACED ||\
+	 (field) == V4L2_FIELD_INTERLACED_TB ||\
+	 (field) == V4L2_FIELD_INTERLACED_BT ||\
+	 (field) == V4L2_FIELD_SEQ_TB ||\
+	 (field) == V4L2_FIELD_SEQ_BT)
+
+enum v4l2_buf_type {
+	V4L2_BUF_TYPE_VIDEO_CAPTURE        = 1,
+	V4L2_BUF_TYPE_VIDEO_OUTPUT         = 2,
+	V4L2_BUF_TYPE_VIDEO_OVERLAY        = 3,
+	V4L2_BUF_TYPE_VBI_CAPTURE          = 4,
+	V4L2_BUF_TYPE_VBI_OUTPUT           = 5,
+	V4L2_BUF_TYPE_SLICED_VBI_CAPTURE   = 6,
+	V4L2_BUF_TYPE_SLICED_VBI_OUTPUT    = 7,
+#if 1
+	/* Experimental */
+	V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
+#endif
+	V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE = 9,
+	V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE  = 10,
+	/* Deprecated, do not use */
+	V4L2_BUF_TYPE_PRIVATE              = 0x80,
+};
+
+#define V4L2_TYPE_IS_MULTIPLANAR(type)			\
+	((type) == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE	\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
+
+#define V4L2_TYPE_IS_OUTPUT(type)				\
+	((type) == V4L2_BUF_TYPE_VIDEO_OUTPUT			\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE		\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OVERLAY		\
+	 || (type) == V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY	\
+	 || (type) == V4L2_BUF_TYPE_VBI_OUTPUT			\
+	 || (type) == V4L2_BUF_TYPE_SLICED_VBI_OUTPUT)
+
+enum v4l2_tuner_type {
+	V4L2_TUNER_RADIO	     = 1,
+	V4L2_TUNER_ANALOG_TV	     = 2,
+	V4L2_TUNER_DIGITAL_TV	     = 3,
+};
+
+enum v4l2_memory {
+	V4L2_MEMORY_MMAP             = 1,
+	V4L2_MEMORY_USERPTR          = 2,
+	V4L2_MEMORY_OVERLAY          = 3,
+};
+
+/* see also http://vektor.theorem.ca/graphics/ycbcr/ */
+enum v4l2_colorspace {
+	/* ITU-R 601 -- broadcast NTSC/PAL */
+	V4L2_COLORSPACE_SMPTE170M     = 1,
+
+	/* 1125-Line (US) HDTV */
+	V4L2_COLORSPACE_SMPTE240M     = 2,
+
+	/* HD and modern captures. */
+	V4L2_COLORSPACE_REC709        = 3,
+
+	/* broken BT878 extents (601, luma range 16-253 instead of 16-235) */
+	V4L2_COLORSPACE_BT878         = 4,
+
+	/* These should be useful.  Assume 601 extents. */
+	V4L2_COLORSPACE_470_SYSTEM_M  = 5,
+	V4L2_COLORSPACE_470_SYSTEM_BG = 6,
+
+	/* I know there will be cameras that send this.  So, this is
+	 * unspecified chromaticities and full 0-255 on each of the
+	 * Y'CbCr components
+	 */
+	V4L2_COLORSPACE_JPEG          = 7,
+
+	/* For RGB colourspaces, this is probably a good start. */
+	V4L2_COLORSPACE_SRGB          = 8,
+};
+
+enum v4l2_priority {
+	V4L2_PRIORITY_UNSET       = 0,  /* not initialized */
+	V4L2_PRIORITY_BACKGROUND  = 1,
+	V4L2_PRIORITY_INTERACTIVE = 2,
+	V4L2_PRIORITY_RECORD      = 3,
+	V4L2_PRIORITY_DEFAULT     = V4L2_PRIORITY_INTERACTIVE,
+};
+
+struct v4l2_rect {
+	__s32   left;
+	__s32   top;
+	__s32   width;
+	__s32   height;
+};
+
+struct v4l2_fract {
+	__u32   numerator;
+	__u32   denominator;
+};
+
+/**
+  * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP
+  *
+  * @driver:	   name of the driver module (e.g. "bttv")
+  * @card:	   name of the card (e.g. "Hauppauge WinTV")
+  * @bus_info:	   name of the bus (e.g. "PCI:" + pci_name(pci_dev) )
+  * @version:	   KERNEL_VERSION
+  * @capabilities: capabilities of the physical device as a whole
+  * @device_caps:  capabilities accessed via this particular device (node)
+  * @reserved:	   reserved fields for future extensions
+  */
+struct v4l2_capability {
+	__u8	driver[16];
+	__u8	card[32];
+	__u8	bus_info[32];
+	__u32   version;
+	__u32	capabilities;
+	__u32	device_caps;
+	__u32	reserved[3];
+};
+
+/* Values for 'capabilities' field */
+#define V4L2_CAP_VIDEO_CAPTURE		0x00000001  /* Is a video capture device */
+#define V4L2_CAP_VIDEO_OUTPUT		0x00000002  /* Is a video output device */
+#define V4L2_CAP_VIDEO_OVERLAY		0x00000004  /* Can do video overlay */
+#define V4L2_CAP_VBI_CAPTURE		0x00000010  /* Is a raw VBI capture device */
+#define V4L2_CAP_VBI_OUTPUT		0x00000020  /* Is a raw VBI output device */
+#define V4L2_CAP_SLICED_VBI_CAPTURE	0x00000040  /* Is a sliced VBI capture device */
+#define V4L2_CAP_SLICED_VBI_OUTPUT	0x00000080  /* Is a sliced VBI output device */
+#define V4L2_CAP_RDS_CAPTURE		0x00000100  /* RDS data capture */
+#define V4L2_CAP_VIDEO_OUTPUT_OVERLAY	0x00000200  /* Can do video output overlay */
+#define V4L2_CAP_HW_FREQ_SEEK		0x00000400  /* Can do hardware frequency seek  */
+#define V4L2_CAP_RDS_OUTPUT		0x00000800  /* Is an RDS encoder */
+
+/* Is a video capture device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_CAPTURE_MPLANE	0x00001000
+/* Is a video output device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_OUTPUT_MPLANE	0x00002000
+/* Is a video mem-to-mem device that supports multiplanar formats */
+#define V4L2_CAP_VIDEO_M2M_MPLANE	0x00004000
+/* Is a video mem-to-mem device */
+#define V4L2_CAP_VIDEO_M2M		0x00008000
+
+#define V4L2_CAP_TUNER			0x00010000  /* has a tuner */
+#define V4L2_CAP_AUDIO			0x00020000  /* has audio support */
+#define V4L2_CAP_RADIO			0x00040000  /* is a radio device */
+#define V4L2_CAP_MODULATOR		0x00080000  /* has a modulator */
+
+#define V4L2_CAP_READWRITE              0x01000000  /* read/write systemcalls */
+#define V4L2_CAP_ASYNCIO                0x02000000  /* async I/O */
+#define V4L2_CAP_STREAMING              0x04000000  /* streaming I/O ioctls */
+
+#define V4L2_CAP_DEVICE_CAPS            0x80000000  /* sets device capabilities field */
+
+/*
+ *	V I D E O   I M A G E   F O R M A T
+ */
+struct v4l2_pix_format {
+	__u32         		width;
+	__u32			height;
+	__u32			pixelformat;
+	__u32			field;		/* enum v4l2_field */
+	__u32            	bytesperline;	/* for padding, zero if unused */
+	__u32          		sizeimage;
+	__u32			colorspace;	/* enum v4l2_colorspace */
+	__u32			priv;		/* private data, depends on pixelformat */
+};
+
+/*      Pixel format         FOURCC                          depth  Description  */
+
+/* RGB formats */
+#define V4L2_PIX_FMT_RGB332  v4l2_fourcc('R', 'G', 'B', '1') /*  8  RGB-3-3-2     */
+#define V4L2_PIX_FMT_RGB444  v4l2_fourcc('R', '4', '4', '4') /* 16  xxxxrrrr ggggbbbb */
+#define V4L2_PIX_FMT_RGB555  v4l2_fourcc('R', 'G', 'B', 'O') /* 16  RGB-5-5-5     */
+#define V4L2_PIX_FMT_RGB565  v4l2_fourcc('R', 'G', 'B', 'P') /* 16  RGB-5-6-5     */
+#define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
+#define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
+#define V4L2_PIX_FMT_BGR666  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6	  */
+#define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
+#define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
+#define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
+#define V4L2_PIX_FMT_RGB32   v4l2_fourcc('R', 'G', 'B', '4') /* 32  RGB-8-8-8-8   */
+
+/* Grey formats */
+#define V4L2_PIX_FMT_GREY    v4l2_fourcc('G', 'R', 'E', 'Y') /*  8  Greyscale     */
+#define V4L2_PIX_FMT_Y4      v4l2_fourcc('Y', '0', '4', ' ') /*  4  Greyscale     */
+#define V4L2_PIX_FMT_Y6      v4l2_fourcc('Y', '0', '6', ' ') /*  6  Greyscale     */
+#define V4L2_PIX_FMT_Y10     v4l2_fourcc('Y', '1', '0', ' ') /* 10  Greyscale     */
+#define V4L2_PIX_FMT_Y12     v4l2_fourcc('Y', '1', '2', ' ') /* 12  Greyscale     */
+#define V4L2_PIX_FMT_Y16     v4l2_fourcc('Y', '1', '6', ' ') /* 16  Greyscale     */
+
+/* Grey bit-packed formats */
+#define V4L2_PIX_FMT_Y10BPACK    v4l2_fourcc('Y', '1', '0', 'B') /* 10  Greyscale bit-packed */
+
+/* Palette formats */
+#define V4L2_PIX_FMT_PAL8    v4l2_fourcc('P', 'A', 'L', '8') /*  8  8-bit palette */
+
+/* Luminance+Chrominance formats */
+#define V4L2_PIX_FMT_YVU410  v4l2_fourcc('Y', 'V', 'U', '9') /*  9  YVU 4:1:0     */
+#define V4L2_PIX_FMT_YVU420  v4l2_fourcc('Y', 'V', '1', '2') /* 12  YVU 4:2:0     */
+#define V4L2_PIX_FMT_YUYV    v4l2_fourcc('Y', 'U', 'Y', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YYUV    v4l2_fourcc('Y', 'Y', 'U', 'V') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YVYU    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16 YVU 4:2:2 */
+#define V4L2_PIX_FMT_UYVY    v4l2_fourcc('U', 'Y', 'V', 'Y') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_VYUY    v4l2_fourcc('V', 'Y', 'U', 'Y') /* 16  YUV 4:2:2     */
+#define V4L2_PIX_FMT_YUV422P v4l2_fourcc('4', '2', '2', 'P') /* 16  YVU422 planar */
+#define V4L2_PIX_FMT_YUV411P v4l2_fourcc('4', '1', '1', 'P') /* 16  YVU411 planar */
+#define V4L2_PIX_FMT_Y41P    v4l2_fourcc('Y', '4', '1', 'P') /* 12  YUV 4:1:1     */
+#define V4L2_PIX_FMT_YUV444  v4l2_fourcc('Y', '4', '4', '4') /* 16  xxxxyyyy uuuuvvvv */
+#define V4L2_PIX_FMT_YUV555  v4l2_fourcc('Y', 'U', 'V', 'O') /* 16  YUV-5-5-5     */
+#define V4L2_PIX_FMT_YUV565  v4l2_fourcc('Y', 'U', 'V', 'P') /* 16  YUV-5-6-5     */
+#define V4L2_PIX_FMT_YUV32   v4l2_fourcc('Y', 'U', 'V', '4') /* 32  YUV-8-8-8-8   */
+#define V4L2_PIX_FMT_YUV410  v4l2_fourcc('Y', 'U', 'V', '9') /*  9  YUV 4:1:0     */
+#define V4L2_PIX_FMT_YUV420  v4l2_fourcc('Y', 'U', '1', '2') /* 12  YUV 4:2:0     */
+#define V4L2_PIX_FMT_HI240   v4l2_fourcc('H', 'I', '2', '4') /*  8  8-bit color   */
+#define V4L2_PIX_FMT_HM12    v4l2_fourcc('H', 'M', '1', '2') /*  8  YUV 4:2:0 16x16 macroblocks */
+#define V4L2_PIX_FMT_M420    v4l2_fourcc('M', '4', '2', '0') /* 12  YUV 4:2:0 2 lines y, 1 line uv interleaved */
+
+/* two planes -- one Y, one Cr + Cb interleaved  */
+#define V4L2_PIX_FMT_NV12    v4l2_fourcc('N', 'V', '1', '2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV21    v4l2_fourcc('N', 'V', '2', '1') /* 12  Y/CrCb 4:2:0  */
+#define V4L2_PIX_FMT_NV16    v4l2_fourcc('N', 'V', '1', '6') /* 16  Y/CbCr 4:2:2  */
+#define V4L2_PIX_FMT_NV61    v4l2_fourcc('N', 'V', '6', '1') /* 16  Y/CrCb 4:2:2  */
+#define V4L2_PIX_FMT_NV24    v4l2_fourcc('N', 'V', '2', '4') /* 24  Y/CbCr 4:4:4  */
+#define V4L2_PIX_FMT_NV42    v4l2_fourcc('N', 'V', '4', '2') /* 24  Y/CrCb 4:4:4  */
+
+/* two non contiguous planes - one Y, one Cr + Cb interleaved  */
+#define V4L2_PIX_FMT_NV12M   v4l2_fourcc('N', 'M', '1', '2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV21M   v4l2_fourcc('N', 'M', '2', '1') /* 21  Y/CrCb 4:2:0  */
+#define V4L2_PIX_FMT_NV12MT  v4l2_fourcc('T', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 64x32 macroblocks */
+#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 16x16 macroblocks */
+
+/* three non contiguous planes - Y, Cb, Cr */
+#define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12  YUV420 planar */
+#define V4L2_PIX_FMT_YVU420M v4l2_fourcc('Y', 'M', '2', '1') /* 12  YVU420 planar */
+
+/* Bayer formats - see http://www.siliconimaging.com/RGB%20Bayer.htm */
+#define V4L2_PIX_FMT_SBGGR8  v4l2_fourcc('B', 'A', '8', '1') /*  8  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG8  v4l2_fourcc('G', 'B', 'R', 'G') /*  8  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG8  v4l2_fourcc('G', 'R', 'B', 'G') /*  8  GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB8  v4l2_fourcc('R', 'G', 'G', 'B') /*  8  RGRG.. GBGB.. */
+#define V4L2_PIX_FMT_SBGGR10 v4l2_fourcc('B', 'G', '1', '0') /* 10  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG10 v4l2_fourcc('G', 'B', '1', '0') /* 10  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') /* 10  GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB10 v4l2_fourcc('R', 'G', '1', '0') /* 10  RGRG.. GBGB.. */
+#define V4L2_PIX_FMT_SBGGR12 v4l2_fourcc('B', 'G', '1', '2') /* 12  BGBG.. GRGR.. */
+#define V4L2_PIX_FMT_SGBRG12 v4l2_fourcc('G', 'B', '1', '2') /* 12  GBGB.. RGRG.. */
+#define V4L2_PIX_FMT_SGRBG12 v4l2_fourcc('B', 'A', '1', '2') /* 12  GRGR.. BGBG.. */
+#define V4L2_PIX_FMT_SRGGB12 v4l2_fourcc('R', 'G', '1', '2') /* 12  RGRG.. GBGB.. */
+	/* 10bit raw bayer DPCM compressed to 8 bits */
+#define V4L2_PIX_FMT_SBGGR10DPCM8 v4l2_fourcc('b', 'B', 'A', '8')
+#define V4L2_PIX_FMT_SGBRG10DPCM8 v4l2_fourcc('b', 'G', 'A', '8')
+#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0')
+#define V4L2_PIX_FMT_SRGGB10DPCM8 v4l2_fourcc('b', 'R', 'A', '8')
+	/*
+	 * 10bit raw bayer, expanded to 16 bits
+	 * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb...
+	 */
+#define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16  BGBG.. GRGR.. */
+
+/* compressed formats */
+#define V4L2_PIX_FMT_MJPEG    v4l2_fourcc('M', 'J', 'P', 'G') /* Motion-JPEG   */
+#define V4L2_PIX_FMT_JPEG     v4l2_fourcc('J', 'P', 'E', 'G') /* JFIF JPEG     */
+#define V4L2_PIX_FMT_DV       v4l2_fourcc('d', 'v', 's', 'd') /* 1394          */
+#define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
+#define V4L2_PIX_FMT_H264     v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
+#define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
+#define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */
+#define V4L2_PIX_FMT_H263     v4l2_fourcc('H', '2', '6', '3') /* H263          */
+#define V4L2_PIX_FMT_MPEG1    v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES     */
+#define V4L2_PIX_FMT_MPEG2    v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES     */
+#define V4L2_PIX_FMT_MPEG4    v4l2_fourcc('M', 'P', 'G', '4') /* MPEG-4 ES     */
+#define V4L2_PIX_FMT_XVID     v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid           */
+#define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
+#define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
+#define V4L2_PIX_FMT_VP8      v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
+
+/*  Vendor-specific formats   */
+#define V4L2_PIX_FMT_CPIA1    v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
+#define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
+#define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
+#define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
+#define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
+#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
+#define V4L2_PIX_FMT_SPCA501  v4l2_fourcc('S', '5', '0', '1') /* YUYV per line */
+#define V4L2_PIX_FMT_SPCA505  v4l2_fourcc('S', '5', '0', '5') /* YYUV per line */
+#define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
+#define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_MR97310A v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_JL2005BCD v4l2_fourcc('J', 'L', '2', '0') /* compressed RGGB bayer */
+#define V4L2_PIX_FMT_SN9C2028 v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
+#define V4L2_PIX_FMT_SQ905C   v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
+#define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
+#define V4L2_PIX_FMT_OV511    v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
+#define V4L2_PIX_FMT_OV518    v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
+#define V4L2_PIX_FMT_STV0680  v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
+#define V4L2_PIX_FMT_TM6000   v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
+#define V4L2_PIX_FMT_CIT_YYVYUY v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
+#define V4L2_PIX_FMT_KONICA420  v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
+#define V4L2_PIX_FMT_JPGL	v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
+#define V4L2_PIX_FMT_SE401      v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
+#define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
+
+/*
+ *	F O R M A T   E N U M E R A T I O N
+ */
+struct v4l2_fmtdesc {
+	__u32		    index;             /* Format number      */
+	__u32		    type;              /* enum v4l2_buf_type */
+	__u32               flags;
+	__u8		    description[32];   /* Description string */
+	__u32		    pixelformat;       /* Format fourcc      */
+	__u32		    reserved[4];
+};
+
+#define V4L2_FMT_FLAG_COMPRESSED 0x0001
+#define V4L2_FMT_FLAG_EMULATED   0x0002
+
+#if 1
+	/* Experimental Frame Size and frame rate enumeration */
+/*
+ *	F R A M E   S I Z E   E N U M E R A T I O N
+ */
+enum v4l2_frmsizetypes {
+	V4L2_FRMSIZE_TYPE_DISCRETE	= 1,
+	V4L2_FRMSIZE_TYPE_CONTINUOUS	= 2,
+	V4L2_FRMSIZE_TYPE_STEPWISE	= 3,
+};
+
+struct v4l2_frmsize_discrete {
+	__u32			width;		/* Frame width [pixel] */
+	__u32			height;		/* Frame height [pixel] */
+};
+
+struct v4l2_frmsize_stepwise {
+	__u32			min_width;	/* Minimum frame width [pixel] */
+	__u32			max_width;	/* Maximum frame width [pixel] */
+	__u32			step_width;	/* Frame width step size [pixel] */
+	__u32			min_height;	/* Minimum frame height [pixel] */
+	__u32			max_height;	/* Maximum frame height [pixel] */
+	__u32			step_height;	/* Frame height step size [pixel] */
+};
+
+struct v4l2_frmsizeenum {
+	__u32			index;		/* Frame size number */
+	__u32			pixel_format;	/* Pixel format */
+	__u32			type;		/* Frame size type the device supports. */
+
+	union {					/* Frame size */
+		struct v4l2_frmsize_discrete	discrete;
+		struct v4l2_frmsize_stepwise	stepwise;
+	};
+
+	__u32   reserved[2];			/* Reserved space for future use */
+};
+
+/*
+ *	F R A M E   R A T E   E N U M E R A T I O N
+ */
+enum v4l2_frmivaltypes {
+	V4L2_FRMIVAL_TYPE_DISCRETE	= 1,
+	V4L2_FRMIVAL_TYPE_CONTINUOUS	= 2,
+	V4L2_FRMIVAL_TYPE_STEPWISE	= 3,
+};
+
+struct v4l2_frmival_stepwise {
+	struct v4l2_fract	min;		/* Minimum frame interval [s] */
+	struct v4l2_fract	max;		/* Maximum frame interval [s] */
+	struct v4l2_fract	step;		/* Frame interval step size [s] */
+};
+
+struct v4l2_frmivalenum {
+	__u32			index;		/* Frame format index */
+	__u32			pixel_format;	/* Pixel format */
+	__u32			width;		/* Frame width */
+	__u32			height;		/* Frame height */
+	__u32			type;		/* Frame interval type the device supports. */
+
+	union {					/* Frame interval */
+		struct v4l2_fract		discrete;
+		struct v4l2_frmival_stepwise	stepwise;
+	};
+
+	__u32	reserved[2];			/* Reserved space for future use */
+};
+#endif
+
+/*
+ *	T I M E C O D E
+ */
+struct v4l2_timecode {
+	__u32	type;
+	__u32	flags;
+	__u8	frames;
+	__u8	seconds;
+	__u8	minutes;
+	__u8	hours;
+	__u8	userbits[4];
+};
+
+/*  Type  */
+#define V4L2_TC_TYPE_24FPS		1
+#define V4L2_TC_TYPE_25FPS		2
+#define V4L2_TC_TYPE_30FPS		3
+#define V4L2_TC_TYPE_50FPS		4
+#define V4L2_TC_TYPE_60FPS		5
+
+/*  Flags  */
+#define V4L2_TC_FLAG_DROPFRAME		0x0001 /* "drop-frame" mode */
+#define V4L2_TC_FLAG_COLORFRAME		0x0002
+#define V4L2_TC_USERBITS_field		0x000C
+#define V4L2_TC_USERBITS_USERDEFINED	0x0000
+#define V4L2_TC_USERBITS_8BITCHARS	0x0008
+/* The above is based on SMPTE timecodes */
+
+struct v4l2_jpegcompression {
+	int quality;
+
+	int  APPn;              /* Number of APP segment to be written,
+				 * must be 0..15 */
+	int  APP_len;           /* Length of data in JPEG APPn segment */
+	char APP_data[60];      /* Data in the JPEG APPn segment. */
+
+	int  COM_len;           /* Length of data in JPEG COM segment */
+	char COM_data[60];      /* Data in JPEG COM segment */
+
+	__u32 jpeg_markers;     /* Which markers should go into the JPEG
+				 * output. Unless you exactly know what
+				 * you do, leave them untouched.
+				 * Inluding less markers will make the
+				 * resulting code smaller, but there will
+				 * be fewer applications which can read it.
+				 * The presence of the APP and COM marker
+				 * is influenced by APP_len and COM_len
+				 * ONLY, not by this property! */
+
+#define V4L2_JPEG_MARKER_DHT (1<<3)    /* Define Huffman Tables */
+#define V4L2_JPEG_MARKER_DQT (1<<4)    /* Define Quantization Tables */
+#define V4L2_JPEG_MARKER_DRI (1<<5)    /* Define Restart Interval */
+#define V4L2_JPEG_MARKER_COM (1<<6)    /* Comment segment */
+#define V4L2_JPEG_MARKER_APP (1<<7)    /* App segment, driver will
+					* allways use APP0 */
+};
+
+/*
+ *	M E M O R Y - M A P P I N G   B U F F E R S
+ */
+struct v4l2_requestbuffers {
+	__u32			count;
+	__u32			type;		/* enum v4l2_buf_type */
+	__u32			memory;		/* enum v4l2_memory */
+	__u32			reserved[2];
+};
+
+/**
+ * struct v4l2_plane - plane info for multi-planar buffers
+ * @bytesused:		number of bytes occupied by data in the plane (payload)
+ * @length:		size of this plane (NOT the payload) in bytes
+ * @mem_offset:		when memory in the associated struct v4l2_buffer is
+ *			V4L2_MEMORY_MMAP, equals the offset from the start of
+ *			the device memory for this plane (or is a "cookie" that
+ *			should be passed to mmap() called on the video node)
+ * @userptr:		when memory is V4L2_MEMORY_USERPTR, a userspace pointer
+ *			pointing to this plane
+ * @data_offset:	offset in the plane to the start of data; usually 0,
+ *			unless there is a header in front of the data
+ *
+ * Multi-planar buffers consist of one or more planes, e.g. an YCbCr buffer
+ * with two planes can have one plane for Y, and another for interleaved CbCr
+ * components. Each plane can reside in a separate memory buffer, or even in
+ * a completely separate memory node (e.g. in embedded devices).
+ */
+struct v4l2_plane {
+	__u32			bytesused;
+	__u32			length;
+	union {
+		__u32		mem_offset;
+		unsigned long	userptr;
+	} m;
+	__u32			data_offset;
+	__u32			reserved[11];
+};
+
+/**
+ * struct v4l2_buffer - video buffer info
+ * @index:	id number of the buffer
+ * @type:	enum v4l2_buf_type; buffer type (type == *_MPLANE for
+ *		multiplanar buffers);
+ * @bytesused:	number of bytes occupied by data in the buffer (payload);
+ *		unused (set to 0) for multiplanar buffers
+ * @flags:	buffer informational flags
+ * @field:	enum v4l2_field; field order of the image in the buffer
+ * @timestamp:	frame timestamp
+ * @timecode:	frame timecode
+ * @sequence:	sequence count of this frame
+ * @memory:	enum v4l2_memory; the method, in which the actual video data is
+ *		passed
+ * @offset:	for non-multiplanar buffers with memory == V4L2_MEMORY_MMAP;
+ *		offset from the start of the device memory for this plane,
+ *		(or a "cookie" that should be passed to mmap() as offset)
+ * @userptr:	for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR;
+ *		a userspace pointer pointing to this buffer
+ * @planes:	for multiplanar buffers; userspace pointer to the array of plane
+ *		info structs for this buffer
+ * @length:	size in bytes of the buffer (NOT its payload) for single-plane
+ *		buffers (when type != *_MPLANE); number of elements in the
+ *		planes array for multi-plane buffers
+ * @input:	input number from which the video data has has been captured
+ *
+ * Contains data exchanged by application and driver using one of the Streaming
+ * I/O methods.
+ */
+struct v4l2_buffer {
+	__u32			index;
+	__u32			type;
+	__u32			bytesused;
+	__u32			flags;
+	__u32			field;
+	struct timeval		timestamp;
+	struct v4l2_timecode	timecode;
+	__u32			sequence;
+
+	/* memory location */
+	__u32			memory;
+	union {
+		__u32           offset;
+		unsigned long   userptr;
+		struct v4l2_plane *planes;
+	} m;
+	__u32			length;
+	__u32			reserved2;
+	__u32			reserved;
+};
+
+/*  Flags for 'flags' field */
+#define V4L2_BUF_FLAG_MAPPED	0x0001  /* Buffer is mapped (flag) */
+#define V4L2_BUF_FLAG_QUEUED	0x0002	/* Buffer is queued for processing */
+#define V4L2_BUF_FLAG_DONE	0x0004	/* Buffer is ready */
+#define V4L2_BUF_FLAG_KEYFRAME	0x0008	/* Image is a keyframe (I-frame) */
+#define V4L2_BUF_FLAG_PFRAME	0x0010	/* Image is a P-frame */
+#define V4L2_BUF_FLAG_BFRAME	0x0020	/* Image is a B-frame */
+/* Buffer is ready, but the data contained within is corrupted. */
+#define V4L2_BUF_FLAG_ERROR	0x0040
+#define V4L2_BUF_FLAG_TIMECODE	0x0100	/* timecode field is valid */
+#define V4L2_BUF_FLAG_PREPARED	0x0400	/* Buffer is prepared for queuing */
+/* Cache handling flags */
+#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE	0x0800
+#define V4L2_BUF_FLAG_NO_CACHE_CLEAN		0x1000
+
+/*
+ *	O V E R L A Y   P R E V I E W
+ */
+struct v4l2_framebuffer {
+	__u32			capability;
+	__u32			flags;
+/* FIXME: in theory we should pass something like PCI device + memory
+ * region + offset instead of some physical address */
+	void                    *base;
+	struct v4l2_pix_format	fmt;
+};
+/*  Flags for the 'capability' field. Read only */
+#define V4L2_FBUF_CAP_EXTERNOVERLAY	0x0001
+#define V4L2_FBUF_CAP_CHROMAKEY		0x0002
+#define V4L2_FBUF_CAP_LIST_CLIPPING     0x0004
+#define V4L2_FBUF_CAP_BITMAP_CLIPPING	0x0008
+#define V4L2_FBUF_CAP_LOCAL_ALPHA	0x0010
+#define V4L2_FBUF_CAP_GLOBAL_ALPHA	0x0020
+#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA	0x0040
+#define V4L2_FBUF_CAP_SRC_CHROMAKEY	0x0080
+/*  Flags for the 'flags' field. */
+#define V4L2_FBUF_FLAG_PRIMARY		0x0001
+#define V4L2_FBUF_FLAG_OVERLAY		0x0002
+#define V4L2_FBUF_FLAG_CHROMAKEY	0x0004
+#define V4L2_FBUF_FLAG_LOCAL_ALPHA	0x0008
+#define V4L2_FBUF_FLAG_GLOBAL_ALPHA	0x0010
+#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA	0x0020
+#define V4L2_FBUF_FLAG_SRC_CHROMAKEY	0x0040
+
+struct v4l2_clip {
+	struct v4l2_rect        c;
+	struct v4l2_clip	__user *next;
+};
+
+struct v4l2_window {
+	struct v4l2_rect        w;
+	__u32			field;	 /* enum v4l2_field */
+	__u32			chromakey;
+	struct v4l2_clip	__user *clips;
+	__u32			clipcount;
+	void			__user *bitmap;
+	__u8                    global_alpha;
+};
+
+/*
+ *	C A P T U R E   P A R A M E T E R S
+ */
+struct v4l2_captureparm {
+	__u32		   capability;	  /*  Supported modes */
+	__u32		   capturemode;	  /*  Current mode */
+	struct v4l2_fract  timeperframe;  /*  Time per frame in .1us units */
+	__u32		   extendedmode;  /*  Driver-specific extensions */
+	__u32              readbuffers;   /*  # of buffers for read */
+	__u32		   reserved[4];
+};
+
+/*  Flags for 'capability' and 'capturemode' fields */
+#define V4L2_MODE_HIGHQUALITY	0x0001	/*  High quality imaging mode */
+#define V4L2_CAP_TIMEPERFRAME	0x1000	/*  timeperframe field is supported */
+
+struct v4l2_outputparm {
+	__u32		   capability;	 /*  Supported modes */
+	__u32		   outputmode;	 /*  Current mode */
+	struct v4l2_fract  timeperframe; /*  Time per frame in seconds */
+	__u32		   extendedmode; /*  Driver-specific extensions */
+	__u32              writebuffers; /*  # of buffers for write */
+	__u32		   reserved[4];
+};
+
+/*
+ *	I N P U T   I M A G E   C R O P P I N G
+ */
+struct v4l2_cropcap {
+	__u32			type;	/* enum v4l2_buf_type */
+	struct v4l2_rect        bounds;
+	struct v4l2_rect        defrect;
+	struct v4l2_fract       pixelaspect;
+};
+
+struct v4l2_crop {
+	__u32			type;	/* enum v4l2_buf_type */
+	struct v4l2_rect        c;
+};
+
+/**
+ * struct v4l2_selection - selection info
+ * @type:	buffer type (do not use *_MPLANE types)
+ * @target:	Selection target, used to choose one of possible rectangles;
+ *		defined in v4l2-common.h; V4L2_SEL_TGT_* .
+ * @flags:	constraints flags, defined in v4l2-common.h; V4L2_SEL_FLAG_*.
+ * @r:		coordinates of selection window
+ * @reserved:	for future use, rounds structure size to 64 bytes, set to zero
+ *
+ * Hardware may use multiple helper windows to process a video stream.
+ * The structure is used to exchange this selection areas between
+ * an application and a driver.
+ */
+struct v4l2_selection {
+	__u32			type;
+	__u32			target;
+	__u32                   flags;
+	struct v4l2_rect        r;
+	__u32                   reserved[9];
+};
+
+
+/*
+ *      A N A L O G   V I D E O   S T A N D A R D
+ */
+
+typedef __u64 v4l2_std_id;
+
+/* one bit for each */
+#define V4L2_STD_PAL_B          ((v4l2_std_id)0x00000001)
+#define V4L2_STD_PAL_B1         ((v4l2_std_id)0x00000002)
+#define V4L2_STD_PAL_G          ((v4l2_std_id)0x00000004)
+#define V4L2_STD_PAL_H          ((v4l2_std_id)0x00000008)
+#define V4L2_STD_PAL_I          ((v4l2_std_id)0x00000010)
+#define V4L2_STD_PAL_D          ((v4l2_std_id)0x00000020)
+#define V4L2_STD_PAL_D1         ((v4l2_std_id)0x00000040)
+#define V4L2_STD_PAL_K          ((v4l2_std_id)0x00000080)
+
+#define V4L2_STD_PAL_M          ((v4l2_std_id)0x00000100)
+#define V4L2_STD_PAL_N          ((v4l2_std_id)0x00000200)
+#define V4L2_STD_PAL_Nc         ((v4l2_std_id)0x00000400)
+#define V4L2_STD_PAL_60         ((v4l2_std_id)0x00000800)
+
+#define V4L2_STD_NTSC_M         ((v4l2_std_id)0x00001000)	/* BTSC */
+#define V4L2_STD_NTSC_M_JP      ((v4l2_std_id)0x00002000)	/* EIA-J */
+#define V4L2_STD_NTSC_443       ((v4l2_std_id)0x00004000)
+#define V4L2_STD_NTSC_M_KR      ((v4l2_std_id)0x00008000)	/* FM A2 */
+
+#define V4L2_STD_SECAM_B        ((v4l2_std_id)0x00010000)
+#define V4L2_STD_SECAM_D        ((v4l2_std_id)0x00020000)
+#define V4L2_STD_SECAM_G        ((v4l2_std_id)0x00040000)
+#define V4L2_STD_SECAM_H        ((v4l2_std_id)0x00080000)
+#define V4L2_STD_SECAM_K        ((v4l2_std_id)0x00100000)
+#define V4L2_STD_SECAM_K1       ((v4l2_std_id)0x00200000)
+#define V4L2_STD_SECAM_L        ((v4l2_std_id)0x00400000)
+#define V4L2_STD_SECAM_LC       ((v4l2_std_id)0x00800000)
+
+/* ATSC/HDTV */
+#define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
+#define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
+
+/* FIXME:
+   Although std_id is 64 bits, there is an issue on PPC32 architecture that
+   makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
+   this value to 32 bits.
+   As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
+   it should work fine. However, if needed to add more than two standards,
+   v4l2-common.c should be fixed.
+ */
+
+/*
+ * Some macros to merge video standards in order to make live easier for the
+ * drivers and V4L2 applications
+ */
+
+/*
+ * "Common" NTSC/M - It should be noticed that V4L2_STD_NTSC_443 is
+ * Missing here.
+ */
+#define V4L2_STD_NTSC           (V4L2_STD_NTSC_M	|\
+				 V4L2_STD_NTSC_M_JP     |\
+				 V4L2_STD_NTSC_M_KR)
+/* Secam macros */
+#define V4L2_STD_SECAM_DK      	(V4L2_STD_SECAM_D	|\
+				 V4L2_STD_SECAM_K	|\
+				 V4L2_STD_SECAM_K1)
+/* All Secam Standards */
+#define V4L2_STD_SECAM		(V4L2_STD_SECAM_B	|\
+				 V4L2_STD_SECAM_G	|\
+				 V4L2_STD_SECAM_H	|\
+				 V4L2_STD_SECAM_DK	|\
+				 V4L2_STD_SECAM_L       |\
+				 V4L2_STD_SECAM_LC)
+/* PAL macros */
+#define V4L2_STD_PAL_BG		(V4L2_STD_PAL_B		|\
+				 V4L2_STD_PAL_B1	|\
+				 V4L2_STD_PAL_G)
+#define V4L2_STD_PAL_DK		(V4L2_STD_PAL_D		|\
+				 V4L2_STD_PAL_D1	|\
+				 V4L2_STD_PAL_K)
+/*
+ * "Common" PAL - This macro is there to be compatible with the old
+ * V4L1 concept of "PAL": /BGDKHI.
+ * Several PAL standards are mising here: /M, /N and /Nc
+ */
+#define V4L2_STD_PAL		(V4L2_STD_PAL_BG	|\
+				 V4L2_STD_PAL_DK	|\
+				 V4L2_STD_PAL_H		|\
+				 V4L2_STD_PAL_I)
+/* Chroma "agnostic" standards */
+#define V4L2_STD_B		(V4L2_STD_PAL_B		|\
+				 V4L2_STD_PAL_B1	|\
+				 V4L2_STD_SECAM_B)
+#define V4L2_STD_G		(V4L2_STD_PAL_G		|\
+				 V4L2_STD_SECAM_G)
+#define V4L2_STD_H		(V4L2_STD_PAL_H		|\
+				 V4L2_STD_SECAM_H)
+#define V4L2_STD_L		(V4L2_STD_SECAM_L	|\
+				 V4L2_STD_SECAM_LC)
+#define V4L2_STD_GH		(V4L2_STD_G		|\
+				 V4L2_STD_H)
+#define V4L2_STD_DK		(V4L2_STD_PAL_DK	|\
+				 V4L2_STD_SECAM_DK)
+#define V4L2_STD_BG		(V4L2_STD_B		|\
+				 V4L2_STD_G)
+#define V4L2_STD_MN		(V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc	|\
+				 V4L2_STD_NTSC)
+
+/* Standards where MTS/BTSC stereo could be found */
+#define V4L2_STD_MTS		(V4L2_STD_NTSC_M	|\
+				 V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc)
+
+/* Standards for Countries with 60Hz Line frequency */
+#define V4L2_STD_525_60		(V4L2_STD_PAL_M		|\
+				 V4L2_STD_PAL_60	|\
+				 V4L2_STD_NTSC		|\
+				 V4L2_STD_NTSC_443)
+/* Standards for Countries with 50Hz Line frequency */
+#define V4L2_STD_625_50		(V4L2_STD_PAL		|\
+				 V4L2_STD_PAL_N		|\
+				 V4L2_STD_PAL_Nc	|\
+				 V4L2_STD_SECAM)
+
+#define V4L2_STD_ATSC           (V4L2_STD_ATSC_8_VSB    |\
+				 V4L2_STD_ATSC_16_VSB)
+/* Macros with none and all analog standards */
+#define V4L2_STD_UNKNOWN        0
+#define V4L2_STD_ALL            (V4L2_STD_525_60	|\
+				 V4L2_STD_625_50)
+
+struct v4l2_standard {
+	__u32		     index;
+	v4l2_std_id          id;
+	__u8		     name[24];
+	struct v4l2_fract    frameperiod; /* Frames, not fields */
+	__u32		     framelines;
+	__u32		     reserved[4];
+};
+
+/* The DV Preset API is deprecated in favor of the DV Timings API.
+   New drivers shouldn't use this anymore! */
+
+/*
+ *	V I D E O	T I M I N G S	D V	P R E S E T
+ */
+struct v4l2_dv_preset {
+	__u32	preset;
+	__u32	reserved[4];
+};
+
+/*
+ *	D V	P R E S E T S	E N U M E R A T I O N
+ */
+struct v4l2_dv_enum_preset {
+	__u32	index;
+	__u32	preset;
+	__u8	name[32]; /* Name of the preset timing */
+	__u32	width;
+	__u32	height;
+	__u32	reserved[4];
+};
+
+/*
+ * 	D V	P R E S E T	V A L U E S
+ */
+#define		V4L2_DV_INVALID		0
+#define		V4L2_DV_480P59_94	1 /* BT.1362 */
+#define		V4L2_DV_576P50		2 /* BT.1362 */
+#define		V4L2_DV_720P24		3 /* SMPTE 296M */
+#define		V4L2_DV_720P25		4 /* SMPTE 296M */
+#define		V4L2_DV_720P30		5 /* SMPTE 296M */
+#define		V4L2_DV_720P50		6 /* SMPTE 296M */
+#define		V4L2_DV_720P59_94	7 /* SMPTE 274M */
+#define		V4L2_DV_720P60		8 /* SMPTE 274M/296M */
+#define		V4L2_DV_1080I29_97	9 /* BT.1120/ SMPTE 274M */
+#define		V4L2_DV_1080I30		10 /* BT.1120/ SMPTE 274M */
+#define		V4L2_DV_1080I25		11 /* BT.1120 */
+#define		V4L2_DV_1080I50		12 /* SMPTE 296M */
+#define		V4L2_DV_1080I60		13 /* SMPTE 296M */
+#define		V4L2_DV_1080P24		14 /* SMPTE 296M */
+#define		V4L2_DV_1080P25		15 /* SMPTE 296M */
+#define		V4L2_DV_1080P30		16 /* SMPTE 296M */
+#define		V4L2_DV_1080P50		17 /* BT.1120 */
+#define		V4L2_DV_1080P60		18 /* BT.1120 */
+
+/*
+ *	D V 	B T	T I M I N G S
+ */
+
+/** struct v4l2_bt_timings - BT.656/BT.1120 timing data
+ * @width:	total width of the active video in pixels
+ * @height:	total height of the active video in lines
+ * @interlaced:	Interlaced or progressive
+ * @polarities:	Positive or negative polarities
+ * @pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @hfrontporch:Horizontal front porch in pixels
+ * @hsync:	Horizontal Sync length in pixels
+ * @hbackporch:	Horizontal back porch in pixels
+ * @vfrontporch:Vertical front porch in lines
+ * @vsync:	Vertical Sync length in lines
+ * @vbackporch:	Vertical back porch in lines
+ * @il_vfrontporch:Vertical front porch for the even field
+ *		(aka field 2) of interlaced field formats
+ * @il_vsync:	Vertical Sync length for the even field
+ *		(aka field 2) of interlaced field formats
+ * @il_vbackporch:Vertical back porch for the even field
+ *		(aka field 2) of interlaced field formats
+ * @standards:	Standards the timing belongs to
+ * @flags:	Flags
+ * @reserved:	Reserved fields, must be zeroed.
+ *
+ * A note regarding vertical interlaced timings: height refers to the total
+ * height of the active video frame (= two fields). The blanking timings refer
+ * to the blanking of each field. So the height of the total frame is
+ * calculated as follows:
+ *
+ * tot_height = height + vfrontporch + vsync + vbackporch +
+ *                       il_vfrontporch + il_vsync + il_vbackporch
+ *
+ * The active height of each field is height / 2.
+ */
+struct v4l2_bt_timings {
+	__u32	width;
+	__u32	height;
+	__u32	interlaced;
+	__u32	polarities;
+	__u64	pixelclock;
+	__u32	hfrontporch;
+	__u32	hsync;
+	__u32	hbackporch;
+	__u32	vfrontporch;
+	__u32	vsync;
+	__u32	vbackporch;
+	__u32	il_vfrontporch;
+	__u32	il_vsync;
+	__u32	il_vbackporch;
+	__u32	standards;
+	__u32	flags;
+	__u32	reserved[14];
+} __attribute__ ((packed));
+
+/* Interlaced or progressive format */
+#define	V4L2_DV_PROGRESSIVE	0
+#define	V4L2_DV_INTERLACED	1
+
+/* Polarities. If bit is not set, it is assumed to be negative polarity */
+#define V4L2_DV_VSYNC_POS_POL	0x00000001
+#define V4L2_DV_HSYNC_POS_POL	0x00000002
+
+/* Timings standards */
+#define V4L2_DV_BT_STD_CEA861	(1 << 0)  /* CEA-861 Digital TV Profile */
+#define V4L2_DV_BT_STD_DMT	(1 << 1)  /* VESA Discrete Monitor Timings */
+#define V4L2_DV_BT_STD_CVT	(1 << 2)  /* VESA Coordinated Video Timings */
+#define V4L2_DV_BT_STD_GTF	(1 << 3)  /* VESA Generalized Timings Formula */
+
+/* Flags */
+
+/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
+   GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
+   intervals are reduced, allowing a higher resolution over the same
+   bandwidth. This is a read-only flag. */
+#define V4L2_DV_FL_REDUCED_BLANKING		(1 << 0)
+/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
+   of six. These formats can be optionally played at 1 / 1.001 speed.
+   This is a read-only flag. */
+#define V4L2_DV_FL_CAN_REDUCE_FPS		(1 << 1)
+/* CEA-861 specific: only valid for video transmitters, the flag is cleared
+   by receivers.
+   If the framerate of the format is a multiple of six, then the pixelclock
+   used to set up the transmitter is divided by 1.001 to make it compatible
+   with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
+   29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
+   such frequencies, then the flag will also be cleared. */
+#define V4L2_DV_FL_REDUCED_FPS			(1 << 2)
+/* Specific to interlaced formats: if set, then field 1 is really one half-line
+   longer and field 2 is really one half-line shorter, so each field has
+   exactly the same number of half-lines. Whether half-lines can be detected
+   or used depends on the hardware. */
+#define V4L2_DV_FL_HALF_LINE			(1 << 0)
+
+
+/** struct v4l2_dv_timings - DV timings
+ * @type:	the type of the timings
+ * @bt:	BT656/1120 timings
+ */
+struct v4l2_dv_timings {
+	__u32 type;
+	union {
+		struct v4l2_bt_timings	bt;
+		__u32	reserved[32];
+	};
+} __attribute__ ((packed));
+
+/* Values for the type field */
+#define V4L2_DV_BT_656_1120	0	/* BT.656/1120 timing type */
+
+
+/** struct v4l2_enum_dv_timings - DV timings enumeration
+ * @index:	enumeration index
+ * @reserved:	must be zeroed
+ * @timings:	the timings for the given index
+ */
+struct v4l2_enum_dv_timings {
+	__u32 index;
+	__u32 reserved[3];
+	struct v4l2_dv_timings timings;
+};
+
+/** struct v4l2_bt_timings_cap - BT.656/BT.1120 timing capabilities
+ * @min_width:		width in pixels
+ * @max_width:		width in pixels
+ * @min_height:		height in lines
+ * @max_height:		height in lines
+ * @min_pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @max_pixelclock:	Pixel clock in HZ. Ex. 74.25MHz->74250000
+ * @standards:		Supported standards
+ * @capabilities:	Supported capabilities
+ * @reserved:		Must be zeroed
+ */
+struct v4l2_bt_timings_cap {
+	__u32	min_width;
+	__u32	max_width;
+	__u32	min_height;
+	__u32	max_height;
+	__u64	min_pixelclock;
+	__u64	max_pixelclock;
+	__u32	standards;
+	__u32	capabilities;
+	__u32	reserved[16];
+} __attribute__ ((packed));
+
+/* Supports interlaced formats */
+#define V4L2_DV_BT_CAP_INTERLACED	(1 << 0)
+/* Supports progressive formats */
+#define V4L2_DV_BT_CAP_PROGRESSIVE	(1 << 1)
+/* Supports CVT/GTF reduced blanking */
+#define V4L2_DV_BT_CAP_REDUCED_BLANKING	(1 << 2)
+/* Supports custom formats */
+#define V4L2_DV_BT_CAP_CUSTOM		(1 << 3)
+
+/** struct v4l2_dv_timings_cap - DV timings capabilities
+ * @type:	the type of the timings (same as in struct v4l2_dv_timings)
+ * @bt:		the BT656/1120 timings capabilities
+ */
+struct v4l2_dv_timings_cap {
+	__u32 type;
+	__u32 reserved[3];
+	union {
+		struct v4l2_bt_timings_cap bt;
+		__u32 raw_data[32];
+	};
+};
+
+
+/*
+ *	V I D E O   I N P U T S
+ */
+struct v4l2_input {
+	__u32	     index;		/*  Which input */
+	__u8	     name[32];		/*  Label */
+	__u32	     type;		/*  Type of input */
+	__u32	     audioset;		/*  Associated audios (bitfield) */
+	__u32        tuner;             /*  enum v4l2_tuner_type */
+	v4l2_std_id  std;
+	__u32	     status;
+	__u32	     capabilities;
+	__u32	     reserved[3];
+};
+
+/*  Values for the 'type' field */
+#define V4L2_INPUT_TYPE_TUNER		1
+#define V4L2_INPUT_TYPE_CAMERA		2
+
+/* field 'status' - general */
+#define V4L2_IN_ST_NO_POWER    0x00000001  /* Attached device is off */
+#define V4L2_IN_ST_NO_SIGNAL   0x00000002
+#define V4L2_IN_ST_NO_COLOR    0x00000004
+
+/* field 'status' - sensor orientation */
+/* If sensor is mounted upside down set both bits */
+#define V4L2_IN_ST_HFLIP       0x00000010 /* Frames are flipped horizontally */
+#define V4L2_IN_ST_VFLIP       0x00000020 /* Frames are flipped vertically */
+
+/* field 'status' - analog */
+#define V4L2_IN_ST_NO_H_LOCK   0x00000100  /* No horizontal sync lock */
+#define V4L2_IN_ST_COLOR_KILL  0x00000200  /* Color killer is active */
+
+/* field 'status' - digital */
+#define V4L2_IN_ST_NO_SYNC     0x00010000  /* No synchronization lock */
+#define V4L2_IN_ST_NO_EQU      0x00020000  /* No equalizer lock */
+#define V4L2_IN_ST_NO_CARRIER  0x00040000  /* Carrier recovery failed */
+
+/* field 'status' - VCR and set-top box */
+#define V4L2_IN_ST_MACROVISION 0x01000000  /* Macrovision detected */
+#define V4L2_IN_ST_NO_ACCESS   0x02000000  /* Conditional access denied */
+#define V4L2_IN_ST_VTR         0x04000000  /* VTR time constant */
+
+/* capabilities flags */
+#define V4L2_IN_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_IN_CAP_DV_TIMINGS		0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_IN_CAP_CUSTOM_TIMINGS	V4L2_IN_CAP_DV_TIMINGS /* For compatibility */
+#define V4L2_IN_CAP_STD			0x00000004 /* Supports S_STD */
+
+/*
+ *	V I D E O   O U T P U T S
+ */
+struct v4l2_output {
+	__u32	     index;		/*  Which output */
+	__u8	     name[32];		/*  Label */
+	__u32	     type;		/*  Type of output */
+	__u32	     audioset;		/*  Associated audios (bitfield) */
+	__u32	     modulator;         /*  Associated modulator */
+	v4l2_std_id  std;
+	__u32	     capabilities;
+	__u32	     reserved[3];
+};
+/*  Values for the 'type' field */
+#define V4L2_OUTPUT_TYPE_MODULATOR		1
+#define V4L2_OUTPUT_TYPE_ANALOG			2
+#define V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY	3
+
+/* capabilities flags */
+#define V4L2_OUT_CAP_PRESETS		0x00000001 /* Supports S_DV_PRESET */
+#define V4L2_OUT_CAP_DV_TIMINGS		0x00000002 /* Supports S_DV_TIMINGS */
+#define V4L2_OUT_CAP_CUSTOM_TIMINGS	V4L2_OUT_CAP_DV_TIMINGS /* For compatibility */
+#define V4L2_OUT_CAP_STD		0x00000004 /* Supports S_STD */
+
+/*
+ *	C O N T R O L S
+ */
+struct v4l2_control {
+	__u32		     id;
+	__s32		     value;
+};
+
+struct v4l2_ext_control {
+	__u32 id;
+	__u32 size;
+	__u32 reserved2[1];
+	union {
+		__s32 value;
+		__s64 value64;
+		char *string;
+	};
+} __attribute__ ((packed));
+
+struct v4l2_ext_controls {
+	__u32 ctrl_class;
+	__u32 count;
+	__u32 error_idx;
+	__u32 reserved[2];
+	struct v4l2_ext_control *controls;
+};
+
+#define V4L2_CTRL_ID_MASK      	  (0x0fffffff)
+#define V4L2_CTRL_ID2CLASS(id)    ((id) & 0x0fff0000UL)
+#define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000)
+
+enum v4l2_ctrl_type {
+	V4L2_CTRL_TYPE_INTEGER	     = 1,
+	V4L2_CTRL_TYPE_BOOLEAN	     = 2,
+	V4L2_CTRL_TYPE_MENU	     = 3,
+	V4L2_CTRL_TYPE_BUTTON	     = 4,
+	V4L2_CTRL_TYPE_INTEGER64     = 5,
+	V4L2_CTRL_TYPE_CTRL_CLASS    = 6,
+	V4L2_CTRL_TYPE_STRING        = 7,
+	V4L2_CTRL_TYPE_BITMASK       = 8,
+	V4L2_CTRL_TYPE_INTEGER_MENU = 9,
+};
+
+/*  Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
+struct v4l2_queryctrl {
+	__u32		     id;
+	__u32		     type;	/* enum v4l2_ctrl_type */
+	__u8		     name[32];	/* Whatever */
+	__s32		     minimum;	/* Note signedness */
+	__s32		     maximum;
+	__s32		     step;
+	__s32		     default_value;
+	__u32                flags;
+	__u32		     reserved[2];
+};
+
+/*  Used in the VIDIOC_QUERYMENU ioctl for querying menu items */
+struct v4l2_querymenu {
+	__u32		id;
+	__u32		index;
+	union {
+		__u8	name[32];	/* Whatever */
+		__s64	value;
+	};
+	__u32		reserved;
+} __attribute__ ((packed));
+
+/*  Control flags  */
+#define V4L2_CTRL_FLAG_DISABLED		0x0001
+#define V4L2_CTRL_FLAG_GRABBED		0x0002
+#define V4L2_CTRL_FLAG_READ_ONLY 	0x0004
+#define V4L2_CTRL_FLAG_UPDATE 		0x0008
+#define V4L2_CTRL_FLAG_INACTIVE 	0x0010
+#define V4L2_CTRL_FLAG_SLIDER 		0x0020
+#define V4L2_CTRL_FLAG_WRITE_ONLY 	0x0040
+#define V4L2_CTRL_FLAG_VOLATILE		0x0080
+
+/*  Query flag, to be ORed with the control ID */
+#define V4L2_CTRL_FLAG_NEXT_CTRL	0x80000000
+
+/*  User-class control IDs defined by V4L2 */
+#define V4L2_CID_MAX_CTRLS		1024
+/*  IDs reserved for driver specific controls */
+#define V4L2_CID_PRIVATE_BASE		0x08000000
+
+
+/*  DV-class control IDs defined by V4L2 */
+#define V4L2_CID_DV_CLASS_BASE			(V4L2_CTRL_CLASS_DV | 0x900)
+#define V4L2_CID_DV_CLASS			(V4L2_CTRL_CLASS_DV | 1)
+
+#define	V4L2_CID_DV_TX_HOTPLUG			(V4L2_CID_DV_CLASS_BASE + 1)
+#define	V4L2_CID_DV_TX_RXSENSE			(V4L2_CID_DV_CLASS_BASE + 2)
+#define	V4L2_CID_DV_TX_EDID_PRESENT		(V4L2_CID_DV_CLASS_BASE + 3)
+#define	V4L2_CID_DV_TX_MODE			(V4L2_CID_DV_CLASS_BASE + 4)
+enum v4l2_dv_tx_mode {
+	V4L2_DV_TX_MODE_DVI_D	= 0,
+	V4L2_DV_TX_MODE_HDMI	= 1,
+};
+#define V4L2_CID_DV_TX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 5)
+enum v4l2_dv_rgb_range {
+	V4L2_DV_RGB_RANGE_AUTO	  = 0,
+	V4L2_DV_RGB_RANGE_LIMITED = 1,
+	V4L2_DV_RGB_RANGE_FULL	  = 2,
+};
+
+#define	V4L2_CID_DV_RX_POWER_PRESENT		(V4L2_CID_DV_CLASS_BASE + 100)
+#define V4L2_CID_DV_RX_RGB_RANGE		(V4L2_CID_DV_CLASS_BASE + 101)
+
+/*
+ *	T U N I N G
+ */
+struct v4l2_tuner {
+	__u32                   index;
+	__u8			name[32];
+	__u32			type;	/* enum v4l2_tuner_type */
+	__u32			capability;
+	__u32			rangelow;
+	__u32			rangehigh;
+	__u32			rxsubchans;
+	__u32			audmode;
+	__s32			signal;
+	__s32			afc;
+	__u32			reserved[4];
+};
+
+struct v4l2_modulator {
+	__u32			index;
+	__u8			name[32];
+	__u32			capability;
+	__u32			rangelow;
+	__u32			rangehigh;
+	__u32			txsubchans;
+	__u32			reserved[4];
+};
+
+/*  Flags for the 'capability' field */
+#define V4L2_TUNER_CAP_LOW		0x0001
+#define V4L2_TUNER_CAP_NORM		0x0002
+#define V4L2_TUNER_CAP_HWSEEK_BOUNDED	0x0004
+#define V4L2_TUNER_CAP_HWSEEK_WRAP	0x0008
+#define V4L2_TUNER_CAP_STEREO		0x0010
+#define V4L2_TUNER_CAP_LANG2		0x0020
+#define V4L2_TUNER_CAP_SAP		0x0020
+#define V4L2_TUNER_CAP_LANG1		0x0040
+#define V4L2_TUNER_CAP_RDS		0x0080
+#define V4L2_TUNER_CAP_RDS_BLOCK_IO	0x0100
+#define V4L2_TUNER_CAP_RDS_CONTROLS	0x0200
+#define V4L2_TUNER_CAP_FREQ_BANDS	0x0400
+#define V4L2_TUNER_CAP_HWSEEK_PROG_LIM	0x0800
+
+/*  Flags for the 'rxsubchans' field */
+#define V4L2_TUNER_SUB_MONO		0x0001
+#define V4L2_TUNER_SUB_STEREO		0x0002
+#define V4L2_TUNER_SUB_LANG2		0x0004
+#define V4L2_TUNER_SUB_SAP		0x0004
+#define V4L2_TUNER_SUB_LANG1		0x0008
+#define V4L2_TUNER_SUB_RDS		0x0010
+
+/*  Values for the 'audmode' field */
+#define V4L2_TUNER_MODE_MONO		0x0000
+#define V4L2_TUNER_MODE_STEREO		0x0001
+#define V4L2_TUNER_MODE_LANG2		0x0002
+#define V4L2_TUNER_MODE_SAP		0x0002
+#define V4L2_TUNER_MODE_LANG1		0x0003
+#define V4L2_TUNER_MODE_LANG1_LANG2	0x0004
+
+struct v4l2_frequency {
+	__u32	tuner;
+	__u32	type;	/* enum v4l2_tuner_type */
+	__u32	frequency;
+	__u32	reserved[8];
+};
+
+#define V4L2_BAND_MODULATION_VSB	(1 << 1)
+#define V4L2_BAND_MODULATION_FM		(1 << 2)
+#define V4L2_BAND_MODULATION_AM		(1 << 3)
+
+struct v4l2_frequency_band {
+	__u32	tuner;
+	__u32	type;	/* enum v4l2_tuner_type */
+	__u32	index;
+	__u32	capability;
+	__u32	rangelow;
+	__u32	rangehigh;
+	__u32	modulation;
+	__u32	reserved[9];
+};
+
+struct v4l2_hw_freq_seek {
+	__u32	tuner;
+	__u32	type;	/* enum v4l2_tuner_type */
+	__u32	seek_upward;
+	__u32	wrap_around;
+	__u32	spacing;
+	__u32	rangelow;
+	__u32	rangehigh;
+	__u32	reserved[5];
+};
+
+/*
+ *	R D S
+ */
+
+struct v4l2_rds_data {
+	__u8 	lsb;
+	__u8 	msb;
+	__u8 	block;
+} __attribute__ ((packed));
+
+#define V4L2_RDS_BLOCK_MSK 	 0x7
+#define V4L2_RDS_BLOCK_A 	 0
+#define V4L2_RDS_BLOCK_B 	 1
+#define V4L2_RDS_BLOCK_C 	 2
+#define V4L2_RDS_BLOCK_D 	 3
+#define V4L2_RDS_BLOCK_C_ALT 	 4
+#define V4L2_RDS_BLOCK_INVALID 	 7
+
+#define V4L2_RDS_BLOCK_CORRECTED 0x40
+#define V4L2_RDS_BLOCK_ERROR 	 0x80
+
+/*
+ *	A U D I O
+ */
+struct v4l2_audio {
+	__u32	index;
+	__u8	name[32];
+	__u32	capability;
+	__u32	mode;
+	__u32	reserved[2];
+};
+
+/*  Flags for the 'capability' field */
+#define V4L2_AUDCAP_STEREO		0x00001
+#define V4L2_AUDCAP_AVL			0x00002
+
+/*  Flags for the 'mode' field */
+#define V4L2_AUDMODE_AVL		0x00001
+
+struct v4l2_audioout {
+	__u32	index;
+	__u8	name[32];
+	__u32	capability;
+	__u32	mode;
+	__u32	reserved[2];
+};
+
+/*
+ *	M P E G   S E R V I C E S
+ *
+ *	NOTE: EXPERIMENTAL API
+ */
+#if 1
+#define V4L2_ENC_IDX_FRAME_I    (0)
+#define V4L2_ENC_IDX_FRAME_P    (1)
+#define V4L2_ENC_IDX_FRAME_B    (2)
+#define V4L2_ENC_IDX_FRAME_MASK (0xf)
+
+struct v4l2_enc_idx_entry {
+	__u64 offset;
+	__u64 pts;
+	__u32 length;
+	__u32 flags;
+	__u32 reserved[2];
+};
+
+#define V4L2_ENC_IDX_ENTRIES (64)
+struct v4l2_enc_idx {
+	__u32 entries;
+	__u32 entries_cap;
+	__u32 reserved[4];
+	struct v4l2_enc_idx_entry entry[V4L2_ENC_IDX_ENTRIES];
+};
+
+
+#define V4L2_ENC_CMD_START      (0)
+#define V4L2_ENC_CMD_STOP       (1)
+#define V4L2_ENC_CMD_PAUSE      (2)
+#define V4L2_ENC_CMD_RESUME     (3)
+
+/* Flags for V4L2_ENC_CMD_STOP */
+#define V4L2_ENC_CMD_STOP_AT_GOP_END    (1 << 0)
+
+struct v4l2_encoder_cmd {
+	__u32 cmd;
+	__u32 flags;
+	union {
+		struct {
+			__u32 data[8];
+		} raw;
+	};
+};
+
+/* Decoder commands */
+#define V4L2_DEC_CMD_START       (0)
+#define V4L2_DEC_CMD_STOP        (1)
+#define V4L2_DEC_CMD_PAUSE       (2)
+#define V4L2_DEC_CMD_RESUME      (3)
+
+/* Flags for V4L2_DEC_CMD_START */
+#define V4L2_DEC_CMD_START_MUTE_AUDIO	(1 << 0)
+
+/* Flags for V4L2_DEC_CMD_PAUSE */
+#define V4L2_DEC_CMD_PAUSE_TO_BLACK	(1 << 0)
+
+/* Flags for V4L2_DEC_CMD_STOP */
+#define V4L2_DEC_CMD_STOP_TO_BLACK	(1 << 0)
+#define V4L2_DEC_CMD_STOP_IMMEDIATELY	(1 << 1)
+
+/* Play format requirements (returned by the driver): */
+
+/* The decoder has no special format requirements */
+#define V4L2_DEC_START_FMT_NONE		(0)
+/* The decoder requires full GOPs */
+#define V4L2_DEC_START_FMT_GOP		(1)
+
+/* The structure must be zeroed before use by the application
+   This ensures it can be extended safely in the future. */
+struct v4l2_decoder_cmd {
+	__u32 cmd;
+	__u32 flags;
+	union {
+		struct {
+			__u64 pts;
+		} stop;
+
+		struct {
+			/* 0 or 1000 specifies normal speed,
+			   1 specifies forward single stepping,
+			   -1 specifies backward single stepping,
+			   >1: playback at speed/1000 of the normal speed,
+			   <-1: reverse playback at (-speed/1000) of the normal speed. */
+			__s32 speed;
+			__u32 format;
+		} start;
+
+		struct {
+			__u32 data[16];
+		} raw;
+	};
+};
+#endif
+
+
+/*
+ *	D A T A   S E R V I C E S   ( V B I )
+ *
+ *	Data services API by Michael Schimek
+ */
+
+/* Raw VBI */
+struct v4l2_vbi_format {
+	__u32	sampling_rate;		/* in 1 Hz */
+	__u32	offset;
+	__u32	samples_per_line;
+	__u32	sample_format;		/* V4L2_PIX_FMT_* */
+	__s32	start[2];
+	__u32	count[2];
+	__u32	flags;			/* V4L2_VBI_* */
+	__u32	reserved[2];		/* must be zero */
+};
+
+/*  VBI flags  */
+#define V4L2_VBI_UNSYNC		(1 << 0)
+#define V4L2_VBI_INTERLACED	(1 << 1)
+
+/* Sliced VBI
+ *
+ *    This implements is a proposal V4L2 API to allow SLICED VBI
+ * required for some hardware encoders. It should change without
+ * notice in the definitive implementation.
+ */
+
+struct v4l2_sliced_vbi_format {
+	__u16   service_set;
+	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
+	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
+				 (equals frame lines 313-336 for 625 line video
+				  standards, 263-286 for 525 line standards) */
+	__u16   service_lines[2][24];
+	__u32   io_size;
+	__u32   reserved[2];            /* must be zero */
+};
+
+/* Teletext World System Teletext
+   (WST), defined on ITU-R BT.653-2 */
+#define V4L2_SLICED_TELETEXT_B          (0x0001)
+/* Video Program System, defined on ETS 300 231*/
+#define V4L2_SLICED_VPS                 (0x0400)
+/* Closed Caption, defined on EIA-608 */
+#define V4L2_SLICED_CAPTION_525         (0x1000)
+/* Wide Screen System, defined on ITU-R BT1119.1 */
+#define V4L2_SLICED_WSS_625             (0x4000)
+
+#define V4L2_SLICED_VBI_525             (V4L2_SLICED_CAPTION_525)
+#define V4L2_SLICED_VBI_625             (V4L2_SLICED_TELETEXT_B | V4L2_SLICED_VPS | V4L2_SLICED_WSS_625)
+
+struct v4l2_sliced_vbi_cap {
+	__u16   service_set;
+	/* service_lines[0][...] specifies lines 0-23 (1-23 used) of the first field
+	   service_lines[1][...] specifies lines 0-23 (1-23 used) of the second field
+				 (equals frame lines 313-336 for 625 line video
+				  standards, 263-286 for 525 line standards) */
+	__u16   service_lines[2][24];
+	__u32	type;		/* enum v4l2_buf_type */
+	__u32   reserved[3];    /* must be 0 */
+};
+
+struct v4l2_sliced_vbi_data {
+	__u32   id;
+	__u32   field;          /* 0: first field, 1: second field */
+	__u32   line;           /* 1-23 */
+	__u32   reserved;       /* must be 0 */
+	__u8    data[48];
+};
+
+/*
+ * Sliced VBI data inserted into MPEG Streams
+ */
+
+/*
+ * V4L2_MPEG_STREAM_VBI_FMT_IVTV:
+ *
+ * Structure of payload contained in an MPEG 2 Private Stream 1 PES Packet in an
+ * MPEG-2 Program Pack that contains V4L2_MPEG_STREAM_VBI_FMT_IVTV Sliced VBI
+ * data
+ *
+ * Note, the MPEG-2 Program Pack and Private Stream 1 PES packet header
+ * definitions are not included here.  See the MPEG-2 specifications for details
+ * on these headers.
+ */
+
+/* Line type IDs */
+#define V4L2_MPEG_VBI_IVTV_TELETEXT_B     (1)
+#define V4L2_MPEG_VBI_IVTV_CAPTION_525    (4)
+#define V4L2_MPEG_VBI_IVTV_WSS_625        (5)
+#define V4L2_MPEG_VBI_IVTV_VPS            (7)
+
+struct v4l2_mpeg_vbi_itv0_line {
+	__u8 id;	/* One of V4L2_MPEG_VBI_IVTV_* above */
+	__u8 data[42];	/* Sliced VBI data for the line */
+} __attribute__ ((packed));
+
+struct v4l2_mpeg_vbi_itv0 {
+	__le32 linemask[2]; /* Bitmasks of VBI service lines present */
+	struct v4l2_mpeg_vbi_itv0_line line[35];
+} __attribute__ ((packed));
+
+struct v4l2_mpeg_vbi_ITV0 {
+	struct v4l2_mpeg_vbi_itv0_line line[36];
+} __attribute__ ((packed));
+
+#define V4L2_MPEG_VBI_IVTV_MAGIC0	"itv0"
+#define V4L2_MPEG_VBI_IVTV_MAGIC1	"ITV0"
+
+struct v4l2_mpeg_vbi_fmt_ivtv {
+	__u8 magic[4];
+	union {
+		struct v4l2_mpeg_vbi_itv0 itv0;
+		struct v4l2_mpeg_vbi_ITV0 ITV0;
+	};
+} __attribute__ ((packed));
+
+/*
+ *	A G G R E G A T E   S T R U C T U R E S
+ */
+
+/**
+ * struct v4l2_plane_pix_format - additional, per-plane format definition
+ * @sizeimage:		maximum size in bytes required for data, for which
+ *			this plane will be used
+ * @bytesperline:	distance in bytes between the leftmost pixels in two
+ *			adjacent lines
+ */
+struct v4l2_plane_pix_format {
+	__u32		sizeimage;
+	__u16		bytesperline;
+	__u16		reserved[7];
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_pix_format_mplane - multiplanar format definition
+ * @width:		image width in pixels
+ * @height:		image height in pixels
+ * @pixelformat:	little endian four character code (fourcc)
+ * @field:		enum v4l2_field; field order (for interlaced video)
+ * @colorspace:		enum v4l2_colorspace; supplemental to pixelformat
+ * @plane_fmt:		per-plane information
+ * @num_planes:		number of planes for this format
+ */
+struct v4l2_pix_format_mplane {
+	__u32				width;
+	__u32				height;
+	__u32				pixelformat;
+	__u32				field;
+	__u32				colorspace;
+
+	struct v4l2_plane_pix_format	plane_fmt[VIDEO_MAX_PLANES];
+	__u8				num_planes;
+	__u8				reserved[11];
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_format - stream data format
+ * @type:	enum v4l2_buf_type; type of the data stream
+ * @pix:	definition of an image format
+ * @pix_mp:	definition of a multiplanar image format
+ * @win:	definition of an overlaid image
+ * @vbi:	raw VBI capture or output parameters
+ * @sliced:	sliced VBI capture or output parameters
+ * @raw_data:	placeholder for future extensions and custom formats
+ */
+struct v4l2_format {
+	__u32	 type;
+	union {
+		struct v4l2_pix_format		pix;     /* V4L2_BUF_TYPE_VIDEO_CAPTURE */
+		struct v4l2_pix_format_mplane	pix_mp;  /* V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE */
+		struct v4l2_window		win;     /* V4L2_BUF_TYPE_VIDEO_OVERLAY */
+		struct v4l2_vbi_format		vbi;     /* V4L2_BUF_TYPE_VBI_CAPTURE */
+		struct v4l2_sliced_vbi_format	sliced;  /* V4L2_BUF_TYPE_SLICED_VBI_CAPTURE */
+		__u8	raw_data[200];                   /* user-defined */
+	} fmt;
+};
+
+/*	Stream type-dependent parameters
+ */
+struct v4l2_streamparm {
+	__u32	 type;			/* enum v4l2_buf_type */
+	union {
+		struct v4l2_captureparm	capture;
+		struct v4l2_outputparm	output;
+		__u8	raw_data[200];  /* user-defined */
+	} parm;
+};
+
+/*
+ *	E V E N T S
+ */
+
+#define V4L2_EVENT_ALL				0
+#define V4L2_EVENT_VSYNC			1
+#define V4L2_EVENT_EOS				2
+#define V4L2_EVENT_CTRL				3
+#define V4L2_EVENT_FRAME_SYNC			4
+#define V4L2_EVENT_PRIVATE_START		0x08000000
+
+/* Payload for V4L2_EVENT_VSYNC */
+struct v4l2_event_vsync {
+	/* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
+	__u8 field;
+} __attribute__ ((packed));
+
+/* Payload for V4L2_EVENT_CTRL */
+#define V4L2_EVENT_CTRL_CH_VALUE		(1 << 0)
+#define V4L2_EVENT_CTRL_CH_FLAGS		(1 << 1)
+
+struct v4l2_event_ctrl {
+	__u32 changes;
+	__u32 type;
+	union {
+		__s32 value;
+		__s64 value64;
+	};
+	__u32 flags;
+	__s32 minimum;
+	__s32 maximum;
+	__s32 step;
+	__s32 default_value;
+};
+
+struct v4l2_event_frame_sync {
+	__u32 frame_sequence;
+};
+
+struct v4l2_event {
+	__u32				type;
+	union {
+		struct v4l2_event_vsync		vsync;
+		struct v4l2_event_ctrl		ctrl;
+		struct v4l2_event_frame_sync	frame_sync;
+		__u8				data[64];
+	} u;
+	__u32				pending;
+	__u32				sequence;
+	struct timespec			timestamp;
+	__u32				id;
+	__u32				reserved[8];
+};
+
+#define V4L2_EVENT_SUB_FL_SEND_INITIAL		(1 << 0)
+#define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK	(1 << 1)
+
+struct v4l2_event_subscription {
+	__u32				type;
+	__u32				id;
+	__u32				flags;
+	__u32				reserved[5];
+};
+
+/*
+ *	A D V A N C E D   D E B U G G I N G
+ *
+ *	NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS!
+ *	FOR DEBUGGING, TESTING AND INTERNAL USE ONLY!
+ */
+
+/* VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER */
+
+#define V4L2_CHIP_MATCH_HOST       0  /* Match against chip ID on host (0 for the host) */
+#define V4L2_CHIP_MATCH_I2C_DRIVER 1  /* Match against I2C driver name */
+#define V4L2_CHIP_MATCH_I2C_ADDR   2  /* Match against I2C 7-bit address */
+#define V4L2_CHIP_MATCH_AC97       3  /* Match against anciliary AC97 chip */
+
+struct v4l2_dbg_match {
+	__u32 type; /* Match type */
+	union {     /* Match this chip, meaning determined by type */
+		__u32 addr;
+		char name[32];
+	};
+} __attribute__ ((packed));
+
+struct v4l2_dbg_register {
+	struct v4l2_dbg_match match;
+	__u32 size;	/* register size in bytes */
+	__u64 reg;
+	__u64 val;
+} __attribute__ ((packed));
+
+/* VIDIOC_DBG_G_CHIP_IDENT */
+struct v4l2_dbg_chip_ident {
+	struct v4l2_dbg_match match;
+	__u32 ident;       /* chip identifier as specified in <media/v4l2-chip-ident.h> */
+	__u32 revision;    /* chip revision, chip specific */
+} __attribute__ ((packed));
+
+/**
+ * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
+ * @index:	on return, index of the first created buffer
+ * @count:	entry: number of requested buffers,
+ *		return: number of created buffers
+ * @memory:	enum v4l2_memory; buffer memory type
+ * @format:	frame format, for which buffers are requested
+ * @reserved:	future extensions
+ */
+struct v4l2_create_buffers {
+	__u32			index;
+	__u32			count;
+	__u32			memory;
+	struct v4l2_format	format;
+	__u32			reserved[8];
+};
+
+/*
+ *	I O C T L   C O D E S   F O R   V I D E O   D E V I C E S
+ *
+ */
+#define VIDIOC_QUERYCAP		 _IOR('V',  0, struct v4l2_capability)
+#define VIDIOC_RESERVED		  _IO('V',  1)
+#define VIDIOC_ENUM_FMT         _IOWR('V',  2, struct v4l2_fmtdesc)
+#define VIDIOC_G_FMT		_IOWR('V',  4, struct v4l2_format)
+#define VIDIOC_S_FMT		_IOWR('V',  5, struct v4l2_format)
+#define VIDIOC_REQBUFS		_IOWR('V',  8, struct v4l2_requestbuffers)
+#define VIDIOC_QUERYBUF		_IOWR('V',  9, struct v4l2_buffer)
+#define VIDIOC_G_FBUF		 _IOR('V', 10, struct v4l2_framebuffer)
+#define VIDIOC_S_FBUF		 _IOW('V', 11, struct v4l2_framebuffer)
+#define VIDIOC_OVERLAY		 _IOW('V', 14, int)
+#define VIDIOC_QBUF		_IOWR('V', 15, struct v4l2_buffer)
+#define VIDIOC_DQBUF		_IOWR('V', 17, struct v4l2_buffer)
+#define VIDIOC_STREAMON		 _IOW('V', 18, int)
+#define VIDIOC_STREAMOFF	 _IOW('V', 19, int)
+#define VIDIOC_G_PARM		_IOWR('V', 21, struct v4l2_streamparm)
+#define VIDIOC_S_PARM		_IOWR('V', 22, struct v4l2_streamparm)
+#define VIDIOC_G_STD		 _IOR('V', 23, v4l2_std_id)
+#define VIDIOC_S_STD		 _IOW('V', 24, v4l2_std_id)
+#define VIDIOC_ENUMSTD		_IOWR('V', 25, struct v4l2_standard)
+#define VIDIOC_ENUMINPUT	_IOWR('V', 26, struct v4l2_input)
+#define VIDIOC_G_CTRL		_IOWR('V', 27, struct v4l2_control)
+#define VIDIOC_S_CTRL		_IOWR('V', 28, struct v4l2_control)
+#define VIDIOC_G_TUNER		_IOWR('V', 29, struct v4l2_tuner)
+#define VIDIOC_S_TUNER		 _IOW('V', 30, struct v4l2_tuner)
+#define VIDIOC_G_AUDIO		 _IOR('V', 33, struct v4l2_audio)
+#define VIDIOC_S_AUDIO		 _IOW('V', 34, struct v4l2_audio)
+#define VIDIOC_QUERYCTRL	_IOWR('V', 36, struct v4l2_queryctrl)
+#define VIDIOC_QUERYMENU	_IOWR('V', 37, struct v4l2_querymenu)
+#define VIDIOC_G_INPUT		 _IOR('V', 38, int)
+#define VIDIOC_S_INPUT		_IOWR('V', 39, int)
+#define VIDIOC_G_OUTPUT		 _IOR('V', 46, int)
+#define VIDIOC_S_OUTPUT		_IOWR('V', 47, int)
+#define VIDIOC_ENUMOUTPUT	_IOWR('V', 48, struct v4l2_output)
+#define VIDIOC_G_AUDOUT		 _IOR('V', 49, struct v4l2_audioout)
+#define VIDIOC_S_AUDOUT		 _IOW('V', 50, struct v4l2_audioout)
+#define VIDIOC_G_MODULATOR	_IOWR('V', 54, struct v4l2_modulator)
+#define VIDIOC_S_MODULATOR	 _IOW('V', 55, struct v4l2_modulator)
+#define VIDIOC_G_FREQUENCY	_IOWR('V', 56, struct v4l2_frequency)
+#define VIDIOC_S_FREQUENCY	 _IOW('V', 57, struct v4l2_frequency)
+#define VIDIOC_CROPCAP		_IOWR('V', 58, struct v4l2_cropcap)
+#define VIDIOC_G_CROP		_IOWR('V', 59, struct v4l2_crop)
+#define VIDIOC_S_CROP		 _IOW('V', 60, struct v4l2_crop)
+#define VIDIOC_G_JPEGCOMP	 _IOR('V', 61, struct v4l2_jpegcompression)
+#define VIDIOC_S_JPEGCOMP	 _IOW('V', 62, struct v4l2_jpegcompression)
+#define VIDIOC_QUERYSTD      	 _IOR('V', 63, v4l2_std_id)
+#define VIDIOC_TRY_FMT      	_IOWR('V', 64, struct v4l2_format)
+#define VIDIOC_ENUMAUDIO	_IOWR('V', 65, struct v4l2_audio)
+#define VIDIOC_ENUMAUDOUT	_IOWR('V', 66, struct v4l2_audioout)
+#define VIDIOC_G_PRIORITY	 _IOR('V', 67, __u32) /* enum v4l2_priority */
+#define VIDIOC_S_PRIORITY	 _IOW('V', 68, __u32) /* enum v4l2_priority */
+#define VIDIOC_G_SLICED_VBI_CAP _IOWR('V', 69, struct v4l2_sliced_vbi_cap)
+#define VIDIOC_LOG_STATUS         _IO('V', 70)
+#define VIDIOC_G_EXT_CTRLS	_IOWR('V', 71, struct v4l2_ext_controls)
+#define VIDIOC_S_EXT_CTRLS	_IOWR('V', 72, struct v4l2_ext_controls)
+#define VIDIOC_TRY_EXT_CTRLS	_IOWR('V', 73, struct v4l2_ext_controls)
+#if 1
+#define VIDIOC_ENUM_FRAMESIZES	_IOWR('V', 74, struct v4l2_frmsizeenum)
+#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct v4l2_frmivalenum)
+#define VIDIOC_G_ENC_INDEX       _IOR('V', 76, struct v4l2_enc_idx)
+#define VIDIOC_ENCODER_CMD      _IOWR('V', 77, struct v4l2_encoder_cmd)
+#define VIDIOC_TRY_ENCODER_CMD  _IOWR('V', 78, struct v4l2_encoder_cmd)
+#endif
+
+#if 1
+/* Experimental, meant for debugging, testing and internal use.
+   Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
+   You must be root to use these ioctls. Never use these in applications! */
+#define	VIDIOC_DBG_S_REGISTER 	 _IOW('V', 79, struct v4l2_dbg_register)
+#define	VIDIOC_DBG_G_REGISTER 	_IOWR('V', 80, struct v4l2_dbg_register)
+
+/* Experimental, meant for debugging, testing and internal use.
+   Never use this ioctl in applications! */
+#define VIDIOC_DBG_G_CHIP_IDENT _IOWR('V', 81, struct v4l2_dbg_chip_ident)
+#endif
+
+#define VIDIOC_S_HW_FREQ_SEEK	 _IOW('V', 82, struct v4l2_hw_freq_seek)
+
+/* These four DV Preset ioctls are deprecated in favor of the DV Timings
+   ioctls. */
+#define	VIDIOC_ENUM_DV_PRESETS	_IOWR('V', 83, struct v4l2_dv_enum_preset)
+#define	VIDIOC_S_DV_PRESET	_IOWR('V', 84, struct v4l2_dv_preset)
+#define	VIDIOC_G_DV_PRESET	_IOWR('V', 85, struct v4l2_dv_preset)
+#define	VIDIOC_QUERY_DV_PRESET	_IOR('V',  86, struct v4l2_dv_preset)
+#define	VIDIOC_S_DV_TIMINGS	_IOWR('V', 87, struct v4l2_dv_timings)
+#define	VIDIOC_G_DV_TIMINGS	_IOWR('V', 88, struct v4l2_dv_timings)
+#define	VIDIOC_DQEVENT		 _IOR('V', 89, struct v4l2_event)
+#define	VIDIOC_SUBSCRIBE_EVENT	 _IOW('V', 90, struct v4l2_event_subscription)
+#define	VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
+
+/* Experimental, the below two ioctls may change over the next couple of kernel
+   versions */
+#define VIDIOC_CREATE_BUFS	_IOWR('V', 92, struct v4l2_create_buffers)
+#define VIDIOC_PREPARE_BUF	_IOWR('V', 93, struct v4l2_buffer)
+
+/* Experimental selection API */
+#define VIDIOC_G_SELECTION	_IOWR('V', 94, struct v4l2_selection)
+#define VIDIOC_S_SELECTION	_IOWR('V', 95, struct v4l2_selection)
+
+/* Experimental, these two ioctls may change over the next couple of kernel
+   versions. */
+#define VIDIOC_DECODER_CMD	_IOWR('V', 96, struct v4l2_decoder_cmd)
+#define VIDIOC_TRY_DECODER_CMD	_IOWR('V', 97, struct v4l2_decoder_cmd)
+
+/* Experimental, these three ioctls may change over the next couple of kernel
+   versions. */
+#define VIDIOC_ENUM_DV_TIMINGS  _IOWR('V', 98, struct v4l2_enum_dv_timings)
+#define VIDIOC_QUERY_DV_TIMINGS  _IOR('V', 99, struct v4l2_dv_timings)
+#define VIDIOC_DV_TIMINGS_CAP   _IOWR('V', 100, struct v4l2_dv_timings_cap)
+
+/* Experimental, this ioctl may change over the next couple of kernel
+   versions. */
+#define VIDIOC_ENUM_FREQ_BANDS	_IOWR('V', 101, struct v4l2_frequency_band)
+
+/* Reminder: when adding new ioctls please add support for them to
+   drivers/media/video/v4l2-compat-ioctl32.c as well! */
+
+#define BASE_VIDIOC_PRIVATE	192		/* 192-255 are private */
+
+#endif /* _UAPI__LINUX_VIDEODEV2_H */
diff --git a/include/linux/virtio_9p.h b/include/uapi/linux/virtio_9p.h
similarity index 100%
rename from include/linux/virtio_9p.h
rename to include/uapi/linux/virtio_9p.h
diff --git a/include/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
similarity index 100%
rename from include/linux/virtio_balloon.h
rename to include/uapi/linux/virtio_balloon.h
diff --git a/include/linux/virtio_blk.h b/include/uapi/linux/virtio_blk.h
similarity index 100%
rename from include/linux/virtio_blk.h
rename to include/uapi/linux/virtio_blk.h
diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h
new file mode 100644
index 0000000..b7cda39
--- /dev/null
+++ b/include/uapi/linux/virtio_config.h
@@ -0,0 +1,54 @@
+#ifndef _UAPI_LINUX_VIRTIO_CONFIG_H
+#define _UAPI_LINUX_VIRTIO_CONFIG_H
+/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE. */
+
+/* Virtio devices use a standardized configuration space to define their
+ * features and pass configuration information, but each implementation can
+ * store and access that space differently. */
+#include <linux/types.h>
+
+/* Status byte for guest to report progress, and synchronize features. */
+/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */
+#define VIRTIO_CONFIG_S_ACKNOWLEDGE	1
+/* We have found a driver for the device. */
+#define VIRTIO_CONFIG_S_DRIVER		2
+/* Driver has used its parts of the config, and is happy */
+#define VIRTIO_CONFIG_S_DRIVER_OK	4
+/* We've given up on this device. */
+#define VIRTIO_CONFIG_S_FAILED		0x80
+
+/* Some virtio feature bits (currently bits 28 through 31) are reserved for the
+ * transport being used (eg. virtio_ring), the rest are per-device feature
+ * bits. */
+#define VIRTIO_TRANSPORT_F_START	28
+#define VIRTIO_TRANSPORT_F_END		32
+
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY	24
+
+#endif /* _UAPI_LINUX_VIRTIO_CONFIG_H */
diff --git a/include/uapi/linux/virtio_console.h b/include/uapi/linux/virtio_console.h
new file mode 100644
index 0000000..ee13ab6
--- /dev/null
+++ b/include/uapi/linux/virtio_console.h
@@ -0,0 +1,74 @@
+/*
+ * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
+ * anyone can use the definitions to implement compatible drivers/servers:
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright (C) Red Hat, Inc., 2009, 2010, 2011
+ * Copyright (C) Amit Shah <amit.shah@redhat.com>, 2009, 2010, 2011
+ */
+#ifndef _UAPI_LINUX_VIRTIO_CONSOLE_H
+#define _UAPI_LINUX_VIRTIO_CONSOLE_H
+#include <linux/types.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_config.h>
+
+/* Feature bits */
+#define VIRTIO_CONSOLE_F_SIZE	0	/* Does host provide console size? */
+#define VIRTIO_CONSOLE_F_MULTIPORT 1	/* Does host provide multiple ports? */
+
+#define VIRTIO_CONSOLE_BAD_ID		(~(u32)0)
+
+struct virtio_console_config {
+	/* colums of the screens */
+	__u16 cols;
+	/* rows of the screens */
+	__u16 rows;
+	/* max. number of ports this device can hold */
+	__u32 max_nr_ports;
+} __attribute__((packed));
+
+/*
+ * A message that's passed between the Host and the Guest for a
+ * particular port.
+ */
+struct virtio_console_control {
+	__u32 id;		/* Port number */
+	__u16 event;		/* The kind of control event (see below) */
+	__u16 value;		/* Extra information for the key */
+};
+
+/* Some events for control messages */
+#define VIRTIO_CONSOLE_DEVICE_READY	0
+#define VIRTIO_CONSOLE_PORT_ADD		1
+#define VIRTIO_CONSOLE_PORT_REMOVE	2
+#define VIRTIO_CONSOLE_PORT_READY	3
+#define VIRTIO_CONSOLE_CONSOLE_PORT	4
+#define VIRTIO_CONSOLE_RESIZE		5
+#define VIRTIO_CONSOLE_PORT_OPEN	6
+#define VIRTIO_CONSOLE_PORT_NAME	7
+
+
+#endif /* _UAPI_LINUX_VIRTIO_CONSOLE_H */
diff --git a/include/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
similarity index 100%
rename from include/linux/virtio_ids.h
rename to include/uapi/linux/virtio_ids.h
diff --git a/include/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
similarity index 100%
rename from include/linux/virtio_net.h
rename to include/uapi/linux/virtio_net.h
diff --git a/include/linux/virtio_pci.h b/include/uapi/linux/virtio_pci.h
similarity index 100%
rename from include/linux/virtio_pci.h
rename to include/uapi/linux/virtio_pci.h
diff --git a/include/uapi/linux/virtio_ring.h b/include/uapi/linux/virtio_ring.h
new file mode 100644
index 0000000..a99f9b7
--- /dev/null
+++ b/include/uapi/linux/virtio_ring.h
@@ -0,0 +1,163 @@
+#ifndef _UAPI_LINUX_VIRTIO_RING_H
+#define _UAPI_LINUX_VIRTIO_RING_H
+/* An interface for efficient virtio implementation, currently for use by KVM
+ * and lguest, but hopefully others soon.  Do NOT change this since it will
+ * break existing servers and clients.
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Copyright Rusty Russell IBM Corporation 2007. */
+#include <linux/types.h>
+
+/* This marks a buffer as continuing via the next field. */
+#define VRING_DESC_F_NEXT	1
+/* This marks a buffer as write-only (otherwise read-only). */
+#define VRING_DESC_F_WRITE	2
+/* This means the buffer contains a list of buffer descriptors. */
+#define VRING_DESC_F_INDIRECT	4
+
+/* The Host uses this in used->flags to advise the Guest: don't kick me when
+ * you add a buffer.  It's unreliable, so it's simply an optimization.  Guest
+ * will still kick if it's out of buffers. */
+#define VRING_USED_F_NO_NOTIFY	1
+/* The Guest uses this in avail->flags to advise the Host: don't interrupt me
+ * when you consume a buffer.  It's unreliable, so it's simply an
+ * optimization.  */
+#define VRING_AVAIL_F_NO_INTERRUPT	1
+
+/* We support indirect buffer descriptors */
+#define VIRTIO_RING_F_INDIRECT_DESC	28
+
+/* The Guest publishes the used index for which it expects an interrupt
+ * at the end of the avail ring. Host should ignore the avail->flags field. */
+/* The Host publishes the avail index for which it expects a kick
+ * at the end of the used ring. Guest should ignore the used->flags field. */
+#define VIRTIO_RING_F_EVENT_IDX		29
+
+/* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
+struct vring_desc {
+	/* Address (guest-physical). */
+	__u64 addr;
+	/* Length. */
+	__u32 len;
+	/* The flags as indicated above. */
+	__u16 flags;
+	/* We chain unused descriptors via this, too */
+	__u16 next;
+};
+
+struct vring_avail {
+	__u16 flags;
+	__u16 idx;
+	__u16 ring[];
+};
+
+/* u32 is used here for ids for padding reasons. */
+struct vring_used_elem {
+	/* Index of start of used descriptor chain. */
+	__u32 id;
+	/* Total length of the descriptor chain which was used (written to) */
+	__u32 len;
+};
+
+struct vring_used {
+	__u16 flags;
+	__u16 idx;
+	struct vring_used_elem ring[];
+};
+
+struct vring {
+	unsigned int num;
+
+	struct vring_desc *desc;
+
+	struct vring_avail *avail;
+
+	struct vring_used *used;
+};
+
+/* The standard layout for the ring is a continuous chunk of memory which looks
+ * like this.  We assume num is a power of 2.
+ *
+ * struct vring
+ * {
+ *	// The actual descriptors (16 bytes each)
+ *	struct vring_desc desc[num];
+ *
+ *	// A ring of available descriptor heads with free-running index.
+ *	__u16 avail_flags;
+ *	__u16 avail_idx;
+ *	__u16 available[num];
+ *	__u16 used_event_idx;
+ *
+ *	// Padding to the next align boundary.
+ *	char pad[];
+ *
+ *	// A ring of used descriptor heads with free-running index.
+ *	__u16 used_flags;
+ *	__u16 used_idx;
+ *	struct vring_used_elem used[num];
+ *	__u16 avail_event_idx;
+ * };
+ */
+/* We publish the used event index at the end of the available ring, and vice
+ * versa. They are at the end for backwards compatibility. */
+#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num])
+#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num])
+
+static inline void vring_init(struct vring *vr, unsigned int num, void *p,
+			      unsigned long align)
+{
+	vr->num = num;
+	vr->desc = p;
+	vr->avail = p + num*sizeof(struct vring_desc);
+	vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
+		+ align-1) & ~(align - 1));
+}
+
+static inline unsigned vring_size(unsigned int num, unsigned long align)
+{
+	return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
+		 + align - 1) & ~(align - 1))
+		+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
+}
+
+/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */
+/* Assuming a given event_idx value from the other size, if
+ * we have just incremented index from old to new_idx,
+ * should we trigger an event? */
+static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old)
+{
+	/* Note: Xen has similar logic for notification hold-off
+	 * in include/xen/interface/io/ring.h with req_event and req_prod
+	 * corresponding to event_idx + 1 and new_idx respectively.
+	 * Note also that req_event and req_prod in Xen start at 1,
+	 * event indexes in virtio start at 0. */
+	return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old);
+}
+
+#endif /* _UAPI_LINUX_VIRTIO_RING_H */
diff --git a/include/linux/virtio_rng.h b/include/uapi/linux/virtio_rng.h
similarity index 100%
rename from include/linux/virtio_rng.h
rename to include/uapi/linux/virtio_rng.h
diff --git a/include/uapi/linux/vt.h b/include/uapi/linux/vt.h
new file mode 100644
index 0000000..4b59a26
--- /dev/null
+++ b/include/uapi/linux/vt.h
@@ -0,0 +1,90 @@
+#ifndef _UAPI_LINUX_VT_H
+#define _UAPI_LINUX_VT_H
+
+
+/*
+ * These constants are also useful for user-level apps (e.g., VC
+ * resizing).
+ */
+#define MIN_NR_CONSOLES 1       /* must be at least 1 */
+#define MAX_NR_CONSOLES	63	/* serial lines start at 64 */
+#define MAX_NR_USER_CONSOLES 63	/* must be root to allocate above this */
+		/* Note: the ioctl VT_GETSTATE does not work for
+		   consoles 16 and higher (since it returns a short) */
+
+/* 0x56 is 'V', to avoid collision with termios and kd */
+
+#define VT_OPENQRY	0x5600	/* find available vt */
+
+struct vt_mode {
+	char mode;		/* vt mode */
+	char waitv;		/* if set, hang on writes if not active */
+	short relsig;		/* signal to raise on release req */
+	short acqsig;		/* signal to raise on acquisition */
+	short frsig;		/* unused (set to 0) */
+};
+#define VT_GETMODE	0x5601	/* get mode of active vt */
+#define VT_SETMODE	0x5602	/* set mode of active vt */
+#define		VT_AUTO		0x00	/* auto vt switching */
+#define		VT_PROCESS	0x01	/* process controls switching */
+#define		VT_ACKACQ	0x02	/* acknowledge switch */
+
+struct vt_stat {
+	unsigned short v_active;	/* active vt */
+	unsigned short v_signal;	/* signal to send */
+	unsigned short v_state;		/* vt bitmask */
+};
+#define VT_GETSTATE	0x5603	/* get global vt state info */
+#define VT_SENDSIG	0x5604	/* signal to send to bitmask of vts */
+
+#define VT_RELDISP	0x5605	/* release display */
+
+#define VT_ACTIVATE	0x5606	/* make vt active */
+#define VT_WAITACTIVE	0x5607	/* wait for vt active */
+#define VT_DISALLOCATE	0x5608  /* free memory associated to vt */
+
+struct vt_sizes {
+	unsigned short v_rows;		/* number of rows */
+	unsigned short v_cols;		/* number of columns */
+	unsigned short v_scrollsize;	/* number of lines of scrollback */
+};
+#define VT_RESIZE	0x5609	/* set kernel's idea of screensize */
+
+struct vt_consize {
+	unsigned short v_rows;	/* number of rows */
+	unsigned short v_cols;	/* number of columns */
+	unsigned short v_vlin;	/* number of pixel rows on screen */
+	unsigned short v_clin;	/* number of pixel rows per character */
+	unsigned short v_vcol;	/* number of pixel columns on screen */
+	unsigned short v_ccol;	/* number of pixel columns per character */
+};
+#define VT_RESIZEX      0x560A  /* set kernel's idea of screensize + more */
+#define VT_LOCKSWITCH   0x560B  /* disallow vt switching */
+#define VT_UNLOCKSWITCH 0x560C  /* allow vt switching */
+#define VT_GETHIFONTMASK 0x560D  /* return hi font mask */
+
+struct vt_event {
+	unsigned int event;
+#define VT_EVENT_SWITCH		0x0001	/* Console switch */
+#define VT_EVENT_BLANK		0x0002	/* Screen blank */
+#define VT_EVENT_UNBLANK	0x0004	/* Screen unblank */
+#define VT_EVENT_RESIZE		0x0008	/* Resize display */
+#define VT_MAX_EVENT		0x000F
+	unsigned int oldev;		/* Old console */
+	unsigned int newev;		/* New console (if changing) */
+	unsigned int pad[4];		/* Padding for expansion */
+};
+
+#define VT_WAITEVENT	0x560E	/* Wait for an event */
+
+struct vt_setactivate {
+	unsigned int console;
+	struct vt_mode mode;
+};
+
+#define VT_SETACTIVATE	0x560F	/* Activate and set the mode of a console */
+
+
+#define vt_get_kmsg_redirect() vt_kmsg_redirect(-1)
+
+#endif /* _UAPI_LINUX_VT_H */
diff --git a/include/uapi/linux/wait.h b/include/uapi/linux/wait.h
new file mode 100644
index 0000000..9393eea
--- /dev/null
+++ b/include/uapi/linux/wait.h
@@ -0,0 +1,21 @@
+#ifndef _UAPI_LINUX_WAIT_H
+#define _UAPI_LINUX_WAIT_H
+
+#define WNOHANG		0x00000001
+#define WUNTRACED	0x00000002
+#define WSTOPPED	WUNTRACED
+#define WEXITED		0x00000004
+#define WCONTINUED	0x00000008
+#define WNOWAIT		0x01000000	/* Don't reap, just poll status.  */
+
+#define __WNOTHREAD	0x20000000	/* Don't wait on children of other threads in this group */
+#define __WALL		0x40000000	/* Wait on all children, regardless of type */
+#define __WCLONE	0x80000000	/* Wait only on non-SIGCHLD children */
+
+/* First argument to waitid: */
+#define P_ALL		0
+#define P_PID		1
+#define P_PGID		2
+
+
+#endif /* _UAPI_LINUX_WAIT_H */
diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h
new file mode 100644
index 0000000..7617df2
--- /dev/null
+++ b/include/uapi/linux/wanrouter.h
@@ -0,0 +1,452 @@
+/*****************************************************************************
+* wanrouter.h	Definitions for the WAN Multiprotocol Router Module.
+*		This module provides API and common services for WAN Link
+*		Drivers and is completely hardware-independent.
+*
+* Author: 	Nenad Corbic <ncorbic@sangoma.com>
+*		Gideon Hack 	
+* Additions:	Arnaldo Melo
+*
+* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
+*
+*		This program is free software; you can redistribute it and/or
+*		modify it under the terms of the GNU General Public License
+*		as published by the Free Software Foundation; either version
+*		2 of the License, or (at your option) any later version.
+* ============================================================================
+* Jul 21, 2000  Nenad Corbic	Added WAN_FT1_READY State
+* Feb 24, 2000  Nenad Corbic    Added support for socket based x25api
+* Jan 28, 2000  Nenad Corbic    Added support for the ASYNC protocol.
+* Oct 04, 1999  Nenad Corbic 	Updated for 2.1.0 release
+* Jun 02, 1999  Gideon Hack	Added support for the S514 adapter.
+* May 23, 1999	Arnaldo Melo	Added local_addr to wanif_conf_t
+*				WAN_DISCONNECTING state added
+* Jul 20, 1998	David Fong	Added Inverse ARP options to 'wanif_conf_t'
+* Jun 12, 1998	David Fong	Added Cisco HDLC support.
+* Dec 16, 1997	Jaspreet Singh	Moved 'enable_IPX' and 'network_number' to
+*				'wanif_conf_t'
+* Dec 05, 1997	Jaspreet Singh	Added 'pap', 'chap' to 'wanif_conf_t'
+*				Added 'authenticator' to 'wan_ppp_conf_t'
+* Nov 06, 1997	Jaspreet Singh	Changed Router Driver version to 1.1 from 1.0
+* Oct 20, 1997	Jaspreet Singh	Added 'cir','bc','be' and 'mc' to 'wanif_conf_t'
+*				Added 'enable_IPX' and 'network_number' to 
+*				'wan_device_t'.  Also added defines for
+*				UDP PACKET TYPE, Interrupt test, critical values
+*				for RACE conditions.
+* Oct 05, 1997	Jaspreet Singh	Added 'dlci_num' and 'dlci[100]' to 
+*				'wan_fr_conf_t' to configure a list of dlci(s)
+*				for a NODE 
+* Jul 07, 1997	Jaspreet Singh	Added 'ttl' to 'wandev_conf_t' & 'wan_device_t'
+* May 29, 1997 	Jaspreet Singh	Added 'tx_int_enabled' to 'wan_device_t'
+* May 21, 1997	Jaspreet Singh	Added 'udp_port' to 'wan_device_t'
+* Apr 25, 1997  Farhan Thawar   Added 'udp_port' to 'wandev_conf_t'
+* Jan 16, 1997	Gene Kozin	router_devlist made public
+* Jan 02, 1997	Gene Kozin	Initial version (based on wanpipe.h).
+*****************************************************************************/
+
+#ifndef _UAPI_ROUTER_H
+#define _UAPI_ROUTER_H
+
+#define	ROUTER_NAME	"wanrouter"	/* in case we ever change it */
+#define	ROUTER_VERSION	1		/* version number */
+#define	ROUTER_RELEASE	1		/* release (minor version) number */
+#define	ROUTER_IOCTL	'W'		/* for IOCTL calls */
+#define	ROUTER_MAGIC	0x524D4157L	/* signature: 'WANR' reversed */
+
+/* IOCTL codes for /proc/router/<device> entries (up to 255) */
+enum router_ioctls
+{
+	ROUTER_SETUP	= ROUTER_IOCTL<<8,	/* configure device */
+	ROUTER_DOWN,				/* shut down device */
+	ROUTER_STAT,				/* get device status */
+	ROUTER_IFNEW,				/* add interface */
+	ROUTER_IFDEL,				/* delete interface */
+	ROUTER_IFSTAT,				/* get interface status */
+	ROUTER_USER	= (ROUTER_IOCTL<<8)+16,	/* driver-specific calls */
+	ROUTER_USER_MAX	= (ROUTER_IOCTL<<8)+31
+};
+
+/* identifiers for displaying proc file data for dual port adapters */
+#define PROC_DATA_PORT_0 0x8000	/* the data is for port 0 */
+#define PROC_DATA_PORT_1 0x8001	/* the data is for port 1 */
+
+/* NLPID for packet encapsulation (ISO/IEC TR 9577) */
+#define	NLPID_IP	0xCC	/* Internet Protocol Datagram */
+#define	NLPID_SNAP	0x80	/* IEEE Subnetwork Access Protocol */
+#define	NLPID_CLNP	0x81	/* ISO/IEC 8473 */
+#define	NLPID_ESIS	0x82	/* ISO/IEC 9542 */
+#define	NLPID_ISIS	0x83	/* ISO/IEC ISIS */
+#define	NLPID_Q933	0x08	/* CCITT Q.933 */
+
+/* Miscellaneous */
+#define	WAN_IFNAME_SZ	15	/* max length of the interface name */
+#define	WAN_DRVNAME_SZ	15	/* max length of the link driver name */
+#define	WAN_ADDRESS_SZ	31	/* max length of the WAN media address */
+#define USED_BY_FIELD	8	/* max length of the used by field */
+
+/* Defines for UDP PACKET TYPE */
+#define UDP_PTPIPE_TYPE 	0x01
+#define UDP_FPIPE_TYPE		0x02
+#define UDP_CPIPE_TYPE		0x03
+#define UDP_DRVSTATS_TYPE 	0x04
+#define UDP_INVALID_TYPE  	0x05
+
+/* Command return code */
+#define CMD_OK		0		/* normal firmware return code */
+#define CMD_TIMEOUT	0xFF		/* firmware command timed out */
+
+/* UDP Packet Management */
+#define UDP_PKT_FRM_STACK	0x00
+#define UDP_PKT_FRM_NETWORK	0x01
+
+/* Maximum interrupt test counter */
+#define MAX_INTR_TEST_COUNTER	100
+
+/* Critical Values for RACE conditions*/
+#define CRITICAL_IN_ISR		0xA1
+#define CRITICAL_INTR_HANDLED	0xB1
+
+/****** Data Types **********************************************************/
+
+/*----------------------------------------------------------------------------
+ * X.25-specific link-level configuration.
+ */
+typedef struct wan_x25_conf
+{
+	unsigned lo_pvc;	/* lowest permanent circuit number */
+	unsigned hi_pvc;	/* highest permanent circuit number */
+	unsigned lo_svc;	/* lowest switched circuit number */
+	unsigned hi_svc;	/* highest switched circuit number */
+	unsigned hdlc_window;	/* HDLC window size (1..7) */
+	unsigned pkt_window;	/* X.25 packet window size (1..7) */
+	unsigned t1;		/* HDLC timer T1, sec (1..30) */
+	unsigned t2;		/* HDLC timer T2, sec (0..29) */
+	unsigned t4;		/* HDLC supervisory frame timer = T4 * T1 */
+	unsigned n2;		/* HDLC retransmission limit (1..30) */
+	unsigned t10_t20;	/* X.25 RESTART timeout, sec (1..255) */
+	unsigned t11_t21;	/* X.25 CALL timeout, sec (1..255) */
+	unsigned t12_t22;	/* X.25 RESET timeout, sec (1..255) */
+	unsigned t13_t23;	/* X.25 CLEAR timeout, sec (1..255) */
+	unsigned t16_t26;	/* X.25 INTERRUPT timeout, sec (1..255) */
+	unsigned t28;		/* X.25 REGISTRATION timeout, sec (1..255) */
+	unsigned r10_r20;	/* RESTART retransmission limit (0..250) */
+	unsigned r12_r22;	/* RESET retransmission limit (0..250) */
+	unsigned r13_r23;	/* CLEAR retransmission limit (0..250) */
+	unsigned ccitt_compat;	/* compatibility mode: 1988/1984/1980 */
+	unsigned x25_conf_opt;   /* User defined x25 config optoins */
+	unsigned char LAPB_hdlc_only; /* Run in HDLC only mode */
+	unsigned char logging;   /* Control connection logging */  
+	unsigned char oob_on_modem; /* Whether to send modem status to the user app */
+} wan_x25_conf_t;
+
+/*----------------------------------------------------------------------------
+ * Frame relay specific link-level configuration.
+ */
+typedef struct wan_fr_conf
+{
+	unsigned signalling;	/* local in-channel signalling type */
+	unsigned t391;		/* link integrity verification timer */
+	unsigned t392;		/* polling verification timer */
+	unsigned n391;		/* full status polling cycle counter */
+	unsigned n392;		/* error threshold counter */
+	unsigned n393;		/* monitored events counter */
+	unsigned dlci_num;	/* number of DLCs (access node) */
+	unsigned  dlci[100];    /* List of all DLCIs */
+} wan_fr_conf_t;
+
+/*----------------------------------------------------------------------------
+ * PPP-specific link-level configuration.
+ */
+typedef struct wan_ppp_conf
+{
+	unsigned restart_tmr;	/* restart timer */
+	unsigned auth_rsrt_tmr;	/* authentication timer */
+	unsigned auth_wait_tmr;	/* authentication timer */
+	unsigned mdm_fail_tmr;	/* modem failure timer */
+	unsigned dtr_drop_tmr;	/* DTR drop timer */
+	unsigned connect_tmout;	/* connection timeout */
+	unsigned conf_retry;	/* max. retry */
+	unsigned term_retry;	/* max. retry */
+	unsigned fail_retry;	/* max. retry */
+	unsigned auth_retry;	/* max. retry */
+	unsigned auth_options;	/* authentication opt. */
+	unsigned ip_options;	/* IP options */
+	char	authenticator;	/* AUTHENTICATOR or not */
+	char	ip_mode;	/* Static/Host/Peer */
+} wan_ppp_conf_t;
+
+/*----------------------------------------------------------------------------
+ * CHDLC-specific link-level configuration.
+ */
+typedef struct wan_chdlc_conf
+{
+	unsigned char ignore_dcd;	/* Protocol options:		*/
+	unsigned char ignore_cts;	/*  Ignore these to determine	*/
+	unsigned char ignore_keepalive;	/*  link status (Yes or No)	*/
+	unsigned char hdlc_streaming;	/*  hdlc_streaming mode (Y/N) */
+	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
+	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
+	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
+	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
+	unsigned slarp_timer;		/* SLARP request timer */
+} wan_chdlc_conf_t;
+
+
+/*----------------------------------------------------------------------------
+ * WAN device configuration. Passed to ROUTER_SETUP IOCTL.
+ */
+typedef struct wandev_conf
+{
+	unsigned magic;		/* magic number (for verification) */
+	unsigned config_id;	/* configuration structure identifier */
+				/****** hardware configuration ******/
+	unsigned ioport;	/* adapter I/O port base */
+	unsigned long maddr;	/* dual-port memory address */
+	unsigned msize;		/* dual-port memory size */
+	int irq;		/* interrupt request level */
+	int dma;		/* DMA request level */
+        char S514_CPU_no[1];	/* S514 PCI adapter CPU number ('A' or 'B') */
+        unsigned PCI_slot_no;	/* S514 PCI adapter slot number */
+	char auto_pci_cfg;	/* S515 PCI automatic slot detection */
+	char comm_port;		/* Communication Port (PRI=0, SEC=1) */ 
+	unsigned bps;		/* data transfer rate */
+	unsigned mtu;		/* maximum transmit unit size */
+        unsigned udp_port;      /* UDP port for management */
+	unsigned char ttl;	/* Time To Live for UDP security */
+	unsigned char ft1;	/* FT1 Configurator Option */
+        char interface;		/* RS-232/V.35, etc. */
+	char clocking;		/* external/internal */
+	char line_coding;	/* NRZ/NRZI/FM0/FM1, etc. */
+	char station;		/* DTE/DCE, primary/secondary, etc. */
+	char connection;	/* permanent/switched/on-demand */
+	char read_mode;		/* read mode: Polling or interrupt */
+	char receive_only;	/* disable tx buffers */
+	char tty;		/* Create a fake tty device */
+	unsigned tty_major;	/* Major number for wanpipe tty device */
+	unsigned tty_minor; 	/* Minor number for wanpipe tty device */
+	unsigned tty_mode;	/* TTY operation mode SYNC or ASYNC */
+	char backup;		/* Backup Mode */
+	unsigned hw_opt[4];	/* other hardware options */
+	unsigned reserved[4];
+				/****** arbitrary data ***************/
+	unsigned data_size;	/* data buffer size */
+	void* data;		/* data buffer, e.g. firmware */
+	union			/****** protocol-specific ************/
+	{
+		wan_x25_conf_t x25;	/* X.25 configuration */
+		wan_ppp_conf_t ppp;	/* PPP configuration */
+		wan_fr_conf_t fr;	/* frame relay configuration */
+		wan_chdlc_conf_t chdlc;	/* Cisco HDLC configuration */
+	} u;
+} wandev_conf_t;
+
+/* 'config_id' definitions */
+#define	WANCONFIG_X25	101	/* X.25 link */
+#define	WANCONFIG_FR	102	/* frame relay link */
+#define	WANCONFIG_PPP	103	/* synchronous PPP link */
+#define WANCONFIG_CHDLC	104	/* Cisco HDLC Link */
+#define WANCONFIG_BSC	105	/* BiSync Streaming */
+#define WANCONFIG_HDLC	106	/* HDLC Support */
+#define WANCONFIG_MPPP  107	/* Multi Port PPP over RAW CHDLC */
+
+/*
+ * Configuration options defines.
+ */
+/* general options */
+#define	WANOPT_OFF	0
+#define	WANOPT_ON	1
+#define	WANOPT_NO	0
+#define	WANOPT_YES	1
+
+/* intercace options */
+#define	WANOPT_RS232	0
+#define	WANOPT_V35	1
+
+/* data encoding options */
+#define	WANOPT_NRZ	0
+#define	WANOPT_NRZI	1
+#define	WANOPT_FM0	2
+#define	WANOPT_FM1	3
+
+/* link type options */
+#define	WANOPT_POINTTOPOINT	0	/* RTS always active */
+#define	WANOPT_MULTIDROP	1	/* RTS is active when transmitting */
+
+/* clocking options */
+#define	WANOPT_EXTERNAL	0
+#define	WANOPT_INTERNAL	1
+
+/* station options */
+#define	WANOPT_DTE		0
+#define	WANOPT_DCE		1
+#define	WANOPT_CPE		0
+#define	WANOPT_NODE		1
+#define	WANOPT_SECONDARY	0
+#define	WANOPT_PRIMARY		1
+
+/* connection options */
+#define	WANOPT_PERMANENT	0	/* DTR always active */
+#define	WANOPT_SWITCHED		1	/* use DTR to setup link (dial-up) */
+#define	WANOPT_ONDEMAND		2	/* activate DTR only before sending */
+
+/* frame relay in-channel signalling */
+#define	WANOPT_FR_ANSI		1	/* ANSI T1.617 Annex D */
+#define	WANOPT_FR_Q933		2	/* ITU Q.933A */
+#define	WANOPT_FR_LMI		3	/* LMI */
+
+/* PPP IP Mode Options */
+#define	WANOPT_PPP_STATIC	0
+#define	WANOPT_PPP_HOST		1
+#define	WANOPT_PPP_PEER		2
+
+/* ASY Mode Options */
+#define WANOPT_ONE 		1
+#define WANOPT_TWO		2
+#define WANOPT_ONE_AND_HALF	3
+
+#define WANOPT_NONE	0
+#define WANOPT_ODD      1
+#define WANOPT_EVEN	2
+
+/* CHDLC Protocol Options */
+/* DF Commented out for now.
+
+#define WANOPT_CHDLC_NO_DCD		IGNORE_DCD_FOR_LINK_STAT
+#define WANOPT_CHDLC_NO_CTS		IGNORE_CTS_FOR_LINK_STAT
+#define WANOPT_CHDLC_NO_KEEPALIVE	IGNORE_KPALV_FOR_LINK_STAT
+*/
+
+/* Port options */
+#define WANOPT_PRI 0
+#define WANOPT_SEC 1
+/* read mode */
+#define	WANOPT_INTR	0
+#define WANOPT_POLL	1
+
+
+#define WANOPT_TTY_SYNC  0
+#define WANOPT_TTY_ASYNC 1
+/*----------------------------------------------------------------------------
+ * WAN Link Status Info (for ROUTER_STAT IOCTL).
+ */
+typedef struct wandev_stat
+{
+	unsigned state;		/* link state */
+	unsigned ndev;		/* number of configured interfaces */
+
+	/* link/interface configuration */
+	unsigned connection;	/* permanent/switched/on-demand */
+	unsigned media_type;	/* Frame relay/PPP/X.25/SDLC, etc. */
+	unsigned mtu;		/* max. transmit unit for this device */
+
+	/* physical level statistics */
+	unsigned modem_status;	/* modem status */
+	unsigned rx_frames;	/* received frames count */
+	unsigned rx_overruns;	/* receiver overrun error count */
+	unsigned rx_crc_err;	/* receive CRC error count */
+	unsigned rx_aborts;	/* received aborted frames count */
+	unsigned rx_bad_length;	/* unexpetedly long/short frames count */
+	unsigned rx_dropped;	/* frames discarded at device level */
+	unsigned tx_frames;	/* transmitted frames count */
+	unsigned tx_underruns;	/* aborted transmissions (underruns) count */
+	unsigned tx_timeouts;	/* transmission timeouts */
+	unsigned tx_rejects;	/* other transmit errors */
+
+	/* media level statistics */
+	unsigned rx_bad_format;	/* frames with invalid format */
+	unsigned rx_bad_addr;	/* frames with invalid media address */
+	unsigned tx_retries;	/* frames re-transmitted */
+	unsigned reserved[16];	/* reserved for future use */
+} wandev_stat_t;
+
+/* 'state' defines */
+enum wan_states
+{
+	WAN_UNCONFIGURED,	/* link/channel is not configured */
+	WAN_DISCONNECTED,	/* link/channel is disconnected */
+	WAN_CONNECTING,		/* connection is in progress */
+	WAN_CONNECTED,		/* link/channel is operational */
+	WAN_LIMIT,		/* for verification only */
+	WAN_DUALPORT,		/* for Dual Port cards */
+	WAN_DISCONNECTING,
+	WAN_FT1_READY		/* FT1 Configurator Ready */
+};
+
+enum {
+	WAN_LOCAL_IP,
+	WAN_POINTOPOINT_IP,
+	WAN_NETMASK_IP,
+	WAN_BROADCAST_IP
+};
+
+/* 'modem_status' masks */
+#define	WAN_MODEM_CTS	0x0001	/* CTS line active */
+#define	WAN_MODEM_DCD	0x0002	/* DCD line active */
+#define	WAN_MODEM_DTR	0x0010	/* DTR line active */
+#define	WAN_MODEM_RTS	0x0020	/* RTS line active */
+
+/*----------------------------------------------------------------------------
+ * WAN interface (logical channel) configuration (for ROUTER_IFNEW IOCTL).
+ */
+typedef struct wanif_conf
+{
+	unsigned magic;			/* magic number */
+	unsigned config_id;		/* configuration identifier */
+	char name[WAN_IFNAME_SZ+1];	/* interface name, ASCIIZ */
+	char addr[WAN_ADDRESS_SZ+1];	/* media address, ASCIIZ */
+	char usedby[USED_BY_FIELD];	/* used by API or WANPIPE */
+	unsigned idle_timeout;		/* sec, before disconnecting */
+	unsigned hold_timeout;		/* sec, before re-connecting */
+	unsigned cir;			/* Committed Information Rate fwd,bwd*/
+	unsigned bc;			/* Committed Burst Size fwd, bwd */
+	unsigned be;			/* Excess Burst Size fwd, bwd */ 
+	unsigned char enable_IPX;	/* Enable or Disable IPX */
+	unsigned char inarp;		/* Send Inverse ARP requests Y/N */
+	unsigned inarp_interval;	/* sec, between InARP requests */
+	unsigned long network_number;	/* Network Number for IPX */
+	char mc;			/* Multicast on or off */
+	char local_addr[WAN_ADDRESS_SZ+1];/* local media address, ASCIIZ */
+	unsigned char port;		/* board port */
+	unsigned char protocol;		/* prococol used in this channel (TCPOX25 or X25) */
+	char pap;			/* PAP enabled or disabled */
+	char chap;			/* CHAP enabled or disabled */
+	unsigned char userid[511];	/* List of User Id */
+	unsigned char passwd[511];	/* List of passwords */
+	unsigned char sysname[31];	/* Name of the system */
+	unsigned char ignore_dcd;	/* Protocol options: */
+	unsigned char ignore_cts;	/*  Ignore these to determine */
+	unsigned char ignore_keepalive;	/*  link status (Yes or No) */
+	unsigned char hdlc_streaming;	/*  Hdlc streaming mode (Y/N) */
+	unsigned keepalive_tx_tmr;	/* transmit keepalive timer */
+	unsigned keepalive_rx_tmr;	/* receive  keepalive timer */
+	unsigned keepalive_err_margin;	/* keepalive_error_tolerance */
+	unsigned slarp_timer;		/* SLARP request timer */
+	unsigned char ttl;		/* Time To Live for UDP security */
+	char interface;			/* RS-232/V.35, etc. */
+	char clocking;			/* external/internal */
+	unsigned bps;			/* data transfer rate */
+	unsigned mtu;			/* maximum transmit unit size */
+	unsigned char if_down;		/* brind down interface when disconnected */
+	unsigned char gateway;		/* Is this interface a gateway */
+	unsigned char true_if_encoding;	/* Set the dev->type to true board protocol */
+
+	unsigned char asy_data_trans;     /* async API options */
+        unsigned char rts_hs_for_receive; /* async Protocol options */
+        unsigned char xon_xoff_hs_for_receive;
+	unsigned char xon_xoff_hs_for_transmit;
+	unsigned char dcd_hs_for_transmit;
+	unsigned char cts_hs_for_transmit;
+	unsigned char async_mode;
+	unsigned tx_bits_per_char;
+	unsigned rx_bits_per_char;
+	unsigned stop_bits;  
+	unsigned char parity;
+ 	unsigned break_timer;
+        unsigned inter_char_timer;
+	unsigned rx_complete_length;
+	unsigned xon_char;
+	unsigned xoff_char;
+	unsigned char receive_only;	/*  no transmit buffering (Y/N) */
+} wanif_conf_t;
+
+#endif /* _UAPI_ROUTER_H */
diff --git a/include/uapi/linux/watchdog.h b/include/uapi/linux/watchdog.h
new file mode 100644
index 0000000..2babe72
--- /dev/null
+++ b/include/uapi/linux/watchdog.h
@@ -0,0 +1,57 @@
+/*
+ *	Generic watchdog defines. Derived from..
+ *
+ * Berkshire PC Watchdog Defines
+ * by Ken Hollis <khollis@bitgate.com>
+ *
+ */
+
+#ifndef _UAPI_LINUX_WATCHDOG_H
+#define _UAPI_LINUX_WATCHDOG_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#define	WATCHDOG_IOCTL_BASE	'W'
+
+struct watchdog_info {
+	__u32 options;		/* Options the card/driver supports */
+	__u32 firmware_version;	/* Firmware version of the card */
+	__u8  identity[32];	/* Identity of the board */
+};
+
+#define	WDIOC_GETSUPPORT	_IOR(WATCHDOG_IOCTL_BASE, 0, struct watchdog_info)
+#define	WDIOC_GETSTATUS		_IOR(WATCHDOG_IOCTL_BASE, 1, int)
+#define	WDIOC_GETBOOTSTATUS	_IOR(WATCHDOG_IOCTL_BASE, 2, int)
+#define	WDIOC_GETTEMP		_IOR(WATCHDOG_IOCTL_BASE, 3, int)
+#define	WDIOC_SETOPTIONS	_IOR(WATCHDOG_IOCTL_BASE, 4, int)
+#define	WDIOC_KEEPALIVE		_IOR(WATCHDOG_IOCTL_BASE, 5, int)
+#define	WDIOC_SETTIMEOUT        _IOWR(WATCHDOG_IOCTL_BASE, 6, int)
+#define	WDIOC_GETTIMEOUT        _IOR(WATCHDOG_IOCTL_BASE, 7, int)
+#define	WDIOC_SETPRETIMEOUT	_IOWR(WATCHDOG_IOCTL_BASE, 8, int)
+#define	WDIOC_GETPRETIMEOUT	_IOR(WATCHDOG_IOCTL_BASE, 9, int)
+#define	WDIOC_GETTIMELEFT	_IOR(WATCHDOG_IOCTL_BASE, 10, int)
+
+#define	WDIOF_UNKNOWN		-1	/* Unknown flag error */
+#define	WDIOS_UNKNOWN		-1	/* Unknown status error */
+
+#define	WDIOF_OVERHEAT		0x0001	/* Reset due to CPU overheat */
+#define	WDIOF_FANFAULT		0x0002	/* Fan failed */
+#define	WDIOF_EXTERN1		0x0004	/* External relay 1 */
+#define	WDIOF_EXTERN2		0x0008	/* External relay 2 */
+#define	WDIOF_POWERUNDER	0x0010	/* Power bad/power fault */
+#define	WDIOF_CARDRESET		0x0020	/* Card previously reset the CPU */
+#define	WDIOF_POWEROVER		0x0040	/* Power over voltage */
+#define	WDIOF_SETTIMEOUT	0x0080  /* Set timeout (in seconds) */
+#define	WDIOF_MAGICCLOSE	0x0100	/* Supports magic close char */
+#define	WDIOF_PRETIMEOUT	0x0200  /* Pretimeout (in seconds), get/set */
+#define	WDIOF_ALARMONLY		0x0400	/* Watchdog triggers a management or
+					   other external alarm not a reboot */
+#define	WDIOF_KEEPALIVEPING	0x8000	/* Keep alive ping reply */
+
+#define	WDIOS_DISABLECARD	0x0001	/* Turn off the watchdog timer */
+#define	WDIOS_ENABLECARD	0x0002	/* Turn on the watchdog timer */
+#define	WDIOS_TEMPPANIC		0x0004	/* Kernel panic on temperature trip */
+
+
+#endif /* _UAPI_LINUX_WATCHDOG_H */
diff --git a/include/linux/wimax.h b/include/uapi/linux/wimax.h
similarity index 100%
rename from include/linux/wimax.h
rename to include/uapi/linux/wimax.h
diff --git a/include/uapi/linux/wimax/Kbuild b/include/uapi/linux/wimax/Kbuild
index aafaa5a..1c97be4 100644
--- a/include/uapi/linux/wimax/Kbuild
+++ b/include/uapi/linux/wimax/Kbuild
@@ -1 +1,2 @@
 # UAPI Header export list
+header-y += i2400m.h
diff --git a/include/linux/wimax/i2400m.h b/include/uapi/linux/wimax/i2400m.h
similarity index 100%
rename from include/linux/wimax/i2400m.h
rename to include/uapi/linux/wimax/i2400m.h
diff --git a/include/uapi/linux/wireless.h b/include/uapi/linux/wireless.h
new file mode 100644
index 0000000..c1592e3
--- /dev/null
+++ b/include/uapi/linux/wireless.h
@@ -0,0 +1,1128 @@
+/*
+ * This file define a set of standard wireless extensions
+ *
+ * Version :	22	16.3.07
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ */
+
+#ifndef _UAPI_LINUX_WIRELESS_H
+#define _UAPI_LINUX_WIRELESS_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * Initial APIs (1996 -> onward) :
+ * -----------------------------
+ * Basically, the wireless extensions are for now a set of standard ioctl
+ * call + /proc/net/wireless
+ *
+ * The entry /proc/net/wireless give statistics and information on the
+ * driver.
+ * This is better than having each driver having its entry because
+ * its centralised and we may remove the driver module safely.
+ *
+ * Ioctl are used to configure the driver and issue commands.  This is
+ * better than command line options of insmod because we may want to
+ * change dynamically (while the driver is running) some parameters.
+ *
+ * The ioctl mechanimsm are copied from standard devices ioctl.
+ * We have the list of command plus a structure descibing the
+ * data exchanged...
+ * Note that to add these ioctl, I was obliged to modify :
+ *	# net/core/dev.c (two place + add include)
+ *	# net/ipv4/af_inet.c (one place + add include)
+ *
+ * /proc/net/wireless is a copy of /proc/net/dev.
+ * We have a structure for data passed from the driver to /proc/net/wireless
+ * Too add this, I've modified :
+ *	# net/core/dev.c (two other places)
+ *	# include/linux/netdevice.h (one place)
+ *	# include/linux/proc_fs.h (one place)
+ *
+ * New driver API (2002 -> onward) :
+ * -------------------------------
+ * This file is only concerned with the user space API and common definitions.
+ * The new driver API is defined and documented in :
+ *	# include/net/iw_handler.h
+ *
+ * Note as well that /proc/net/wireless implementation has now moved in :
+ *	# net/core/wireless.c
+ *
+ * Wireless Events (2002 -> onward) :
+ * --------------------------------
+ * Events are defined at the end of this file, and implemented in :
+ *	# net/core/wireless.c
+ *
+ * Other comments :
+ * --------------
+ * Do not add here things that are redundant with other mechanisms
+ * (drivers init, ifconfig, /proc/net/dev, ...) and with are not
+ * wireless specific.
+ *
+ * These wireless extensions are not magic : each driver has to provide
+ * support for them...
+ *
+ * IMPORTANT NOTE : As everything in the kernel, this is very much a
+ * work in progress. Contact me if you have ideas of improvements...
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/types.h>		/* for __u* and __s* typedefs */
+#include <linux/socket.h>		/* for "struct sockaddr" et al	*/
+#include <linux/if.h>			/* for IFNAMSIZ and co... */
+
+/***************************** VERSION *****************************/
+/*
+ * This constant is used to know the availability of the wireless
+ * extensions and to know which version of wireless extensions it is
+ * (there is some stuff that will be added in the future...)
+ * I just plan to increment with each new version.
+ */
+#define WIRELESS_EXT	22
+
+/*
+ * Changes :
+ *
+ * V2 to V3
+ * --------
+ *	Alan Cox start some incompatibles changes. I've integrated a bit more.
+ *	- Encryption renamed to Encode to avoid US regulation problems
+ *	- Frequency changed from float to struct to avoid problems on old 386
+ *
+ * V3 to V4
+ * --------
+ *	- Add sensitivity
+ *
+ * V4 to V5
+ * --------
+ *	- Missing encoding definitions in range
+ *	- Access points stuff
+ *
+ * V5 to V6
+ * --------
+ *	- 802.11 support (ESSID ioctls)
+ *
+ * V6 to V7
+ * --------
+ *	- define IW_ESSID_MAX_SIZE and IW_MAX_AP
+ *
+ * V7 to V8
+ * --------
+ *	- Changed my e-mail address
+ *	- More 802.11 support (nickname, rate, rts, frag)
+ *	- List index in frequencies
+ *
+ * V8 to V9
+ * --------
+ *	- Support for 'mode of operation' (ad-hoc, managed...)
+ *	- Support for unicast and multicast power saving
+ *	- Change encoding to support larger tokens (>64 bits)
+ *	- Updated iw_params (disable, flags) and use it for NWID
+ *	- Extracted iw_point from iwreq for clarity
+ *
+ * V9 to V10
+ * ---------
+ *	- Add PM capability to range structure
+ *	- Add PM modifier : MAX/MIN/RELATIVE
+ *	- Add encoding option : IW_ENCODE_NOKEY
+ *	- Add TxPower ioctls (work like TxRate)
+ *
+ * V10 to V11
+ * ----------
+ *	- Add WE version in range (help backward/forward compatibility)
+ *	- Add retry ioctls (work like PM)
+ *
+ * V11 to V12
+ * ----------
+ *	- Add SIOCSIWSTATS to get /proc/net/wireless programatically
+ *	- Add DEV PRIVATE IOCTL to avoid collisions in SIOCDEVPRIVATE space
+ *	- Add new statistics (frag, retry, beacon)
+ *	- Add average quality (for user space calibration)
+ *
+ * V12 to V13
+ * ----------
+ *	- Document creation of new driver API.
+ *	- Extract union iwreq_data from struct iwreq (for new driver API).
+ *	- Rename SIOCSIWNAME as SIOCSIWCOMMIT
+ *
+ * V13 to V14
+ * ----------
+ *	- Wireless Events support : define struct iw_event
+ *	- Define additional specific event numbers
+ *	- Add "addr" and "param" fields in union iwreq_data
+ *	- AP scanning stuff (SIOCSIWSCAN and friends)
+ *
+ * V14 to V15
+ * ----------
+ *	- Add IW_PRIV_TYPE_ADDR for struct sockaddr private arg
+ *	- Make struct iw_freq signed (both m & e), add explicit padding
+ *	- Add IWEVCUSTOM for driver specific event/scanning token
+ *	- Add IW_MAX_GET_SPY for driver returning a lot of addresses
+ *	- Add IW_TXPOW_RANGE for range of Tx Powers
+ *	- Add IWEVREGISTERED & IWEVEXPIRED events for Access Points
+ *	- Add IW_MODE_MONITOR for passive monitor
+ *
+ * V15 to V16
+ * ----------
+ *	- Increase the number of bitrates in iw_range to 32 (for 802.11g)
+ *	- Increase the number of frequencies in iw_range to 32 (for 802.11b+a)
+ *	- Reshuffle struct iw_range for increases, add filler
+ *	- Increase IW_MAX_AP to 64 for driver returning a lot of addresses
+ *	- Remove IW_MAX_GET_SPY because conflict with enhanced spy support
+ *	- Add SIOCSIWTHRSPY/SIOCGIWTHRSPY and "struct iw_thrspy"
+ *	- Add IW_ENCODE_TEMP and iw_range->encoding_login_index
+ *
+ * V16 to V17
+ * ----------
+ *	- Add flags to frequency -> auto/fixed
+ *	- Document (struct iw_quality *)->updated, add new flags (INVALID)
+ *	- Wireless Event capability in struct iw_range
+ *	- Add support for relative TxPower (yick !)
+ *
+ * V17 to V18 (From Jouni Malinen <j@w1.fi>)
+ * ----------
+ *	- Add support for WPA/WPA2
+ *	- Add extended encoding configuration (SIOCSIWENCODEEXT and
+ *	  SIOCGIWENCODEEXT)
+ *	- Add SIOCSIWGENIE/SIOCGIWGENIE
+ *	- Add SIOCSIWMLME
+ *	- Add SIOCSIWPMKSA
+ *	- Add struct iw_range bit field for supported encoding capabilities
+ *	- Add optional scan request parameters for SIOCSIWSCAN
+ *	- Add SIOCSIWAUTH/SIOCGIWAUTH for setting authentication and WPA
+ *	  related parameters (extensible up to 4096 parameter values)
+ *	- Add wireless events: IWEVGENIE, IWEVMICHAELMICFAILURE,
+ *	  IWEVASSOCREQIE, IWEVASSOCRESPIE, IWEVPMKIDCAND
+ *
+ * V18 to V19
+ * ----------
+ *	- Remove (struct iw_point *)->pointer from events and streams
+ *	- Remove header includes to help user space
+ *	- Increase IW_ENCODING_TOKEN_MAX from 32 to 64
+ *	- Add IW_QUAL_ALL_UPDATED and IW_QUAL_ALL_INVALID macros
+ *	- Add explicit flag to tell stats are in dBm : IW_QUAL_DBM
+ *	- Add IW_IOCTL_IDX() and IW_EVENT_IDX() macros
+ *
+ * V19 to V20
+ * ----------
+ *	- RtNetlink requests support (SET/GET)
+ *
+ * V20 to V21
+ * ----------
+ *	- Remove (struct net_device *)->get_wireless_stats()
+ *	- Change length in ESSID and NICK to strlen() instead of strlen()+1
+ *	- Add IW_RETRY_SHORT/IW_RETRY_LONG retry modifiers
+ *	- Power/Retry relative values no longer * 100000
+ *	- Add explicit flag to tell stats are in 802.11k RCPI : IW_QUAL_RCPI
+ *
+ * V21 to V22
+ * ----------
+ *	- Prevent leaking of kernel space in stream on 64 bits.
+ */
+
+/**************************** CONSTANTS ****************************/
+
+/* -------------------------- IOCTL LIST -------------------------- */
+
+/* Wireless Identification */
+#define SIOCSIWCOMMIT	0x8B00		/* Commit pending changes to driver */
+#define SIOCGIWNAME	0x8B01		/* get name == wireless protocol */
+/* SIOCGIWNAME is used to verify the presence of Wireless Extensions.
+ * Common values : "IEEE 802.11-DS", "IEEE 802.11-FH", "IEEE 802.11b"...
+ * Don't put the name of your driver there, it's useless. */
+
+/* Basic operations */
+#define SIOCSIWNWID	0x8B02		/* set network id (pre-802.11) */
+#define SIOCGIWNWID	0x8B03		/* get network id (the cell) */
+#define SIOCSIWFREQ	0x8B04		/* set channel/frequency (Hz) */
+#define SIOCGIWFREQ	0x8B05		/* get channel/frequency (Hz) */
+#define SIOCSIWMODE	0x8B06		/* set operation mode */
+#define SIOCGIWMODE	0x8B07		/* get operation mode */
+#define SIOCSIWSENS	0x8B08		/* set sensitivity (dBm) */
+#define SIOCGIWSENS	0x8B09		/* get sensitivity (dBm) */
+
+/* Informative stuff */
+#define SIOCSIWRANGE	0x8B0A		/* Unused */
+#define SIOCGIWRANGE	0x8B0B		/* Get range of parameters */
+#define SIOCSIWPRIV	0x8B0C		/* Unused */
+#define SIOCGIWPRIV	0x8B0D		/* get private ioctl interface info */
+#define SIOCSIWSTATS	0x8B0E		/* Unused */
+#define SIOCGIWSTATS	0x8B0F		/* Get /proc/net/wireless stats */
+/* SIOCGIWSTATS is strictly used between user space and the kernel, and
+ * is never passed to the driver (i.e. the driver will never see it). */
+
+/* Spy support (statistics per MAC address - used for Mobile IP support) */
+#define SIOCSIWSPY	0x8B10		/* set spy addresses */
+#define SIOCGIWSPY	0x8B11		/* get spy info (quality of link) */
+#define SIOCSIWTHRSPY	0x8B12		/* set spy threshold (spy event) */
+#define SIOCGIWTHRSPY	0x8B13		/* get spy threshold */
+
+/* Access Point manipulation */
+#define SIOCSIWAP	0x8B14		/* set access point MAC addresses */
+#define SIOCGIWAP	0x8B15		/* get access point MAC addresses */
+#define SIOCGIWAPLIST	0x8B17		/* Deprecated in favor of scanning */
+#define SIOCSIWSCAN	0x8B18		/* trigger scanning (list cells) */
+#define SIOCGIWSCAN	0x8B19		/* get scanning results */
+
+/* 802.11 specific support */
+#define SIOCSIWESSID	0x8B1A		/* set ESSID (network name) */
+#define SIOCGIWESSID	0x8B1B		/* get ESSID */
+#define SIOCSIWNICKN	0x8B1C		/* set node name/nickname */
+#define SIOCGIWNICKN	0x8B1D		/* get node name/nickname */
+/* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit
+ * within the 'iwreq' structure, so we need to use the 'data' member to
+ * point to a string in user space, like it is done for RANGE... */
+
+/* Other parameters useful in 802.11 and some other devices */
+#define SIOCSIWRATE	0x8B20		/* set default bit rate (bps) */
+#define SIOCGIWRATE	0x8B21		/* get default bit rate (bps) */
+#define SIOCSIWRTS	0x8B22		/* set RTS/CTS threshold (bytes) */
+#define SIOCGIWRTS	0x8B23		/* get RTS/CTS threshold (bytes) */
+#define SIOCSIWFRAG	0x8B24		/* set fragmentation thr (bytes) */
+#define SIOCGIWFRAG	0x8B25		/* get fragmentation thr (bytes) */
+#define SIOCSIWTXPOW	0x8B26		/* set transmit power (dBm) */
+#define SIOCGIWTXPOW	0x8B27		/* get transmit power (dBm) */
+#define SIOCSIWRETRY	0x8B28		/* set retry limits and lifetime */
+#define SIOCGIWRETRY	0x8B29		/* get retry limits and lifetime */
+
+/* Encoding stuff (scrambling, hardware security, WEP...) */
+#define SIOCSIWENCODE	0x8B2A		/* set encoding token & mode */
+#define SIOCGIWENCODE	0x8B2B		/* get encoding token & mode */
+/* Power saving stuff (power management, unicast and multicast) */
+#define SIOCSIWPOWER	0x8B2C		/* set Power Management settings */
+#define SIOCGIWPOWER	0x8B2D		/* get Power Management settings */
+
+/* WPA : Generic IEEE 802.11 informatiom element (e.g., for WPA/RSN/WMM).
+ * This ioctl uses struct iw_point and data buffer that includes IE id and len
+ * fields. More than one IE may be included in the request. Setting the generic
+ * IE to empty buffer (len=0) removes the generic IE from the driver. Drivers
+ * are allowed to generate their own WPA/RSN IEs, but in these cases, drivers
+ * are required to report the used IE as a wireless event, e.g., when
+ * associating with an AP. */
+#define SIOCSIWGENIE	0x8B30		/* set generic IE */
+#define SIOCGIWGENIE	0x8B31		/* get generic IE */
+
+/* WPA : IEEE 802.11 MLME requests */
+#define SIOCSIWMLME	0x8B16		/* request MLME operation; uses
+					 * struct iw_mlme */
+/* WPA : Authentication mode parameters */
+#define SIOCSIWAUTH	0x8B32		/* set authentication mode params */
+#define SIOCGIWAUTH	0x8B33		/* get authentication mode params */
+
+/* WPA : Extended version of encoding configuration */
+#define SIOCSIWENCODEEXT 0x8B34		/* set encoding token & mode */
+#define SIOCGIWENCODEEXT 0x8B35		/* get encoding token & mode */
+
+/* WPA2 : PMKSA cache management */
+#define SIOCSIWPMKSA	0x8B36		/* PMKSA cache operation */
+
+/* -------------------- DEV PRIVATE IOCTL LIST -------------------- */
+
+/* These 32 ioctl are wireless device private, for 16 commands.
+ * Each driver is free to use them for whatever purpose it chooses,
+ * however the driver *must* export the description of those ioctls
+ * with SIOCGIWPRIV and *must* use arguments as defined below.
+ * If you don't follow those rules, DaveM is going to hate you (reason :
+ * it make mixed 32/64bit operation impossible).
+ */
+#define SIOCIWFIRSTPRIV	0x8BE0
+#define SIOCIWLASTPRIV	0x8BFF
+/* Previously, we were using SIOCDEVPRIVATE, but we now have our
+ * separate range because of collisions with other tools such as
+ * 'mii-tool'.
+ * We now have 32 commands, so a bit more space ;-).
+ * Also, all 'even' commands are only usable by root and don't return the
+ * content of ifr/iwr to user (but you are not obliged to use the set/get
+ * convention, just use every other two command). More details in iwpriv.c.
+ * And I repeat : you are not forced to use them with iwpriv, but you
+ * must be compliant with it.
+ */
+
+/* ------------------------- IOCTL STUFF ------------------------- */
+
+/* The first and the last (range) */
+#define SIOCIWFIRST	0x8B00
+#define SIOCIWLAST	SIOCIWLASTPRIV		/* 0x8BFF */
+#define IW_IOCTL_IDX(cmd)	((cmd) - SIOCIWFIRST)
+#define IW_HANDLER(id, func)			\
+	[IW_IOCTL_IDX(id)] = func
+
+/* Odd : get (world access), even : set (root access) */
+#define IW_IS_SET(cmd)	(!((cmd) & 0x1))
+#define IW_IS_GET(cmd)	((cmd) & 0x1)
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/* Those are *NOT* ioctls, do not issue request on them !!! */
+/* Most events use the same identifier as ioctl requests */
+
+#define IWEVTXDROP	0x8C00		/* Packet dropped to excessive retry */
+#define IWEVQUAL	0x8C01		/* Quality part of statistics (scan) */
+#define IWEVCUSTOM	0x8C02		/* Driver specific ascii string */
+#define IWEVREGISTERED	0x8C03		/* Discovered a new node (AP mode) */
+#define IWEVEXPIRED	0x8C04		/* Expired a node (AP mode) */
+#define IWEVGENIE	0x8C05		/* Generic IE (WPA, RSN, WMM, ..)
+					 * (scan results); This includes id and
+					 * length fields. One IWEVGENIE may
+					 * contain more than one IE. Scan
+					 * results may contain one or more
+					 * IWEVGENIE events. */
+#define IWEVMICHAELMICFAILURE 0x8C06	/* Michael MIC failure
+					 * (struct iw_michaelmicfailure)
+					 */
+#define IWEVASSOCREQIE	0x8C07		/* IEs used in (Re)Association Request.
+					 * The data includes id and length
+					 * fields and may contain more than one
+					 * IE. This event is required in
+					 * Managed mode if the driver
+					 * generates its own WPA/RSN IE. This
+					 * should be sent just before
+					 * IWEVREGISTERED event for the
+					 * association. */
+#define IWEVASSOCRESPIE	0x8C08		/* IEs used in (Re)Association
+					 * Response. The data includes id and
+					 * length fields and may contain more
+					 * than one IE. This may be sent
+					 * between IWEVASSOCREQIE and
+					 * IWEVREGISTERED events for the
+					 * association. */
+#define IWEVPMKIDCAND	0x8C09		/* PMKID candidate for RSN
+					 * pre-authentication
+					 * (struct iw_pmkid_cand) */
+
+#define IWEVFIRST	0x8C00
+#define IW_EVENT_IDX(cmd)	((cmd) - IWEVFIRST)
+
+/* ------------------------- PRIVATE INFO ------------------------- */
+/*
+ * The following is used with SIOCGIWPRIV. It allow a driver to define
+ * the interface (name, type of data) for its private ioctl.
+ * Privates ioctl are SIOCIWFIRSTPRIV -> SIOCIWLASTPRIV
+ */
+
+#define IW_PRIV_TYPE_MASK	0x7000	/* Type of arguments */
+#define IW_PRIV_TYPE_NONE	0x0000
+#define IW_PRIV_TYPE_BYTE	0x1000	/* Char as number */
+#define IW_PRIV_TYPE_CHAR	0x2000	/* Char as character */
+#define IW_PRIV_TYPE_INT	0x4000	/* 32 bits int */
+#define IW_PRIV_TYPE_FLOAT	0x5000	/* struct iw_freq */
+#define IW_PRIV_TYPE_ADDR	0x6000	/* struct sockaddr */
+
+#define IW_PRIV_SIZE_FIXED	0x0800	/* Variable or fixed number of args */
+
+#define IW_PRIV_SIZE_MASK	0x07FF	/* Max number of those args */
+
+/*
+ * Note : if the number of args is fixed and the size < 16 octets,
+ * instead of passing a pointer we will put args in the iwreq struct...
+ */
+
+/* ----------------------- OTHER CONSTANTS ----------------------- */
+
+/* Maximum frequencies in the range struct */
+#define IW_MAX_FREQUENCIES	32
+/* Note : if you have something like 80 frequencies,
+ * don't increase this constant and don't fill the frequency list.
+ * The user will be able to set by channel anyway... */
+
+/* Maximum bit rates in the range struct */
+#define IW_MAX_BITRATES		32
+
+/* Maximum tx powers in the range struct */
+#define IW_MAX_TXPOWER		8
+/* Note : if you more than 8 TXPowers, just set the max and min or
+ * a few of them in the struct iw_range. */
+
+/* Maximum of address that you may set with SPY */
+#define IW_MAX_SPY		8
+
+/* Maximum of address that you may get in the
+   list of access points in range */
+#define IW_MAX_AP		64
+
+/* Maximum size of the ESSID and NICKN strings */
+#define IW_ESSID_MAX_SIZE	32
+
+/* Modes of operation */
+#define IW_MODE_AUTO	0	/* Let the driver decides */
+#define IW_MODE_ADHOC	1	/* Single cell network */
+#define IW_MODE_INFRA	2	/* Multi cell network, roaming, ... */
+#define IW_MODE_MASTER	3	/* Synchronisation master or Access Point */
+#define IW_MODE_REPEAT	4	/* Wireless Repeater (forwarder) */
+#define IW_MODE_SECOND	5	/* Secondary master/repeater (backup) */
+#define IW_MODE_MONITOR	6	/* Passive monitor (listen only) */
+#define IW_MODE_MESH	7	/* Mesh (IEEE 802.11s) network */
+
+/* Statistics flags (bitmask in updated) */
+#define IW_QUAL_QUAL_UPDATED	0x01	/* Value was updated since last read */
+#define IW_QUAL_LEVEL_UPDATED	0x02
+#define IW_QUAL_NOISE_UPDATED	0x04
+#define IW_QUAL_ALL_UPDATED	0x07
+#define IW_QUAL_DBM		0x08	/* Level + Noise are dBm */
+#define IW_QUAL_QUAL_INVALID	0x10	/* Driver doesn't provide value */
+#define IW_QUAL_LEVEL_INVALID	0x20
+#define IW_QUAL_NOISE_INVALID	0x40
+#define IW_QUAL_RCPI		0x80	/* Level + Noise are 802.11k RCPI */
+#define IW_QUAL_ALL_INVALID	0x70
+
+/* Frequency flags */
+#define IW_FREQ_AUTO		0x00	/* Let the driver decides */
+#define IW_FREQ_FIXED		0x01	/* Force a specific value */
+
+/* Maximum number of size of encoding token available
+ * they are listed in the range structure */
+#define IW_MAX_ENCODING_SIZES	8
+
+/* Maximum size of the encoding token in bytes */
+#define IW_ENCODING_TOKEN_MAX	64	/* 512 bits (for now) */
+
+/* Flags for encoding (along with the token) */
+#define IW_ENCODE_INDEX		0x00FF	/* Token index (if needed) */
+#define IW_ENCODE_FLAGS		0xFF00	/* Flags defined below */
+#define IW_ENCODE_MODE		0xF000	/* Modes defined below */
+#define IW_ENCODE_DISABLED	0x8000	/* Encoding disabled */
+#define IW_ENCODE_ENABLED	0x0000	/* Encoding enabled */
+#define IW_ENCODE_RESTRICTED	0x4000	/* Refuse non-encoded packets */
+#define IW_ENCODE_OPEN		0x2000	/* Accept non-encoded packets */
+#define IW_ENCODE_NOKEY		0x0800  /* Key is write only, so not present */
+#define IW_ENCODE_TEMP		0x0400  /* Temporary key */
+
+/* Power management flags available (along with the value, if any) */
+#define IW_POWER_ON		0x0000	/* No details... */
+#define IW_POWER_TYPE		0xF000	/* Type of parameter */
+#define IW_POWER_PERIOD		0x1000	/* Value is a period/duration of  */
+#define IW_POWER_TIMEOUT	0x2000	/* Value is a timeout (to go asleep) */
+#define IW_POWER_MODE		0x0F00	/* Power Management mode */
+#define IW_POWER_UNICAST_R	0x0100	/* Receive only unicast messages */
+#define IW_POWER_MULTICAST_R	0x0200	/* Receive only multicast messages */
+#define IW_POWER_ALL_R		0x0300	/* Receive all messages though PM */
+#define IW_POWER_FORCE_S	0x0400	/* Force PM procedure for sending unicast */
+#define IW_POWER_REPEATER	0x0800	/* Repeat broadcast messages in PM period */
+#define IW_POWER_MODIFIER	0x000F	/* Modify a parameter */
+#define IW_POWER_MIN		0x0001	/* Value is a minimum  */
+#define IW_POWER_MAX		0x0002	/* Value is a maximum */
+#define IW_POWER_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+
+/* Transmit Power flags available */
+#define IW_TXPOW_TYPE		0x00FF	/* Type of value */
+#define IW_TXPOW_DBM		0x0000	/* Value is in dBm */
+#define IW_TXPOW_MWATT		0x0001	/* Value is in mW */
+#define IW_TXPOW_RELATIVE	0x0002	/* Value is in arbitrary units */
+#define IW_TXPOW_RANGE		0x1000	/* Range of value between min/max */
+
+/* Retry limits and lifetime flags available */
+#define IW_RETRY_ON		0x0000	/* No details... */
+#define IW_RETRY_TYPE		0xF000	/* Type of parameter */
+#define IW_RETRY_LIMIT		0x1000	/* Maximum number of retries*/
+#define IW_RETRY_LIFETIME	0x2000	/* Maximum duration of retries in us */
+#define IW_RETRY_MODIFIER	0x00FF	/* Modify a parameter */
+#define IW_RETRY_MIN		0x0001	/* Value is a minimum  */
+#define IW_RETRY_MAX		0x0002	/* Value is a maximum */
+#define IW_RETRY_RELATIVE	0x0004	/* Value is not in seconds/ms/us */
+#define IW_RETRY_SHORT		0x0010	/* Value is for short packets  */
+#define IW_RETRY_LONG		0x0020	/* Value is for long packets */
+
+/* Scanning request flags */
+#define IW_SCAN_DEFAULT		0x0000	/* Default scan of the driver */
+#define IW_SCAN_ALL_ESSID	0x0001	/* Scan all ESSIDs */
+#define IW_SCAN_THIS_ESSID	0x0002	/* Scan only this ESSID */
+#define IW_SCAN_ALL_FREQ	0x0004	/* Scan all Frequencies */
+#define IW_SCAN_THIS_FREQ	0x0008	/* Scan only this Frequency */
+#define IW_SCAN_ALL_MODE	0x0010	/* Scan all Modes */
+#define IW_SCAN_THIS_MODE	0x0020	/* Scan only this Mode */
+#define IW_SCAN_ALL_RATE	0x0040	/* Scan all Bit-Rates */
+#define IW_SCAN_THIS_RATE	0x0080	/* Scan only this Bit-Rate */
+/* struct iw_scan_req scan_type */
+#define IW_SCAN_TYPE_ACTIVE 0
+#define IW_SCAN_TYPE_PASSIVE 1
+/* Maximum size of returned data */
+#define IW_SCAN_MAX_DATA	4096	/* In bytes */
+
+/* Scan capability flags - in (struct iw_range *)->scan_capa */
+#define IW_SCAN_CAPA_NONE		0x00
+#define IW_SCAN_CAPA_ESSID		0x01
+#define IW_SCAN_CAPA_BSSID		0x02
+#define IW_SCAN_CAPA_CHANNEL	0x04
+#define IW_SCAN_CAPA_MODE		0x08
+#define IW_SCAN_CAPA_RATE		0x10
+#define IW_SCAN_CAPA_TYPE		0x20
+#define IW_SCAN_CAPA_TIME		0x40
+
+/* Max number of char in custom event - use multiple of them if needed */
+#define IW_CUSTOM_MAX		256	/* In bytes */
+
+/* Generic information element */
+#define IW_GENERIC_IE_MAX	1024
+
+/* MLME requests (SIOCSIWMLME / struct iw_mlme) */
+#define IW_MLME_DEAUTH		0
+#define IW_MLME_DISASSOC	1
+#define IW_MLME_AUTH		2
+#define IW_MLME_ASSOC		3
+
+/* SIOCSIWAUTH/SIOCGIWAUTH struct iw_param flags */
+#define IW_AUTH_INDEX		0x0FFF
+#define IW_AUTH_FLAGS		0xF000
+/* SIOCSIWAUTH/SIOCGIWAUTH parameters (0 .. 4095)
+ * (IW_AUTH_INDEX mask in struct iw_param flags; this is the index of the
+ * parameter that is being set/get to; value will be read/written to
+ * struct iw_param value field) */
+#define IW_AUTH_WPA_VERSION		0
+#define IW_AUTH_CIPHER_PAIRWISE		1
+#define IW_AUTH_CIPHER_GROUP		2
+#define IW_AUTH_KEY_MGMT		3
+#define IW_AUTH_TKIP_COUNTERMEASURES	4
+#define IW_AUTH_DROP_UNENCRYPTED	5
+#define IW_AUTH_80211_AUTH_ALG		6
+#define IW_AUTH_WPA_ENABLED		7
+#define IW_AUTH_RX_UNENCRYPTED_EAPOL	8
+#define IW_AUTH_ROAMING_CONTROL		9
+#define IW_AUTH_PRIVACY_INVOKED		10
+#define IW_AUTH_CIPHER_GROUP_MGMT	11
+#define IW_AUTH_MFP			12
+
+/* IW_AUTH_WPA_VERSION values (bit field) */
+#define IW_AUTH_WPA_VERSION_DISABLED	0x00000001
+#define IW_AUTH_WPA_VERSION_WPA		0x00000002
+#define IW_AUTH_WPA_VERSION_WPA2	0x00000004
+
+/* IW_AUTH_PAIRWISE_CIPHER, IW_AUTH_GROUP_CIPHER, and IW_AUTH_CIPHER_GROUP_MGMT
+ * values (bit field) */
+#define IW_AUTH_CIPHER_NONE	0x00000001
+#define IW_AUTH_CIPHER_WEP40	0x00000002
+#define IW_AUTH_CIPHER_TKIP	0x00000004
+#define IW_AUTH_CIPHER_CCMP	0x00000008
+#define IW_AUTH_CIPHER_WEP104	0x00000010
+#define IW_AUTH_CIPHER_AES_CMAC	0x00000020
+
+/* IW_AUTH_KEY_MGMT values (bit field) */
+#define IW_AUTH_KEY_MGMT_802_1X	1
+#define IW_AUTH_KEY_MGMT_PSK	2
+
+/* IW_AUTH_80211_AUTH_ALG values (bit field) */
+#define IW_AUTH_ALG_OPEN_SYSTEM	0x00000001
+#define IW_AUTH_ALG_SHARED_KEY	0x00000002
+#define IW_AUTH_ALG_LEAP	0x00000004
+
+/* IW_AUTH_ROAMING_CONTROL values */
+#define IW_AUTH_ROAMING_ENABLE	0	/* driver/firmware based roaming */
+#define IW_AUTH_ROAMING_DISABLE	1	/* user space program used for roaming
+					 * control */
+
+/* IW_AUTH_MFP (management frame protection) values */
+#define IW_AUTH_MFP_DISABLED	0	/* MFP disabled */
+#define IW_AUTH_MFP_OPTIONAL	1	/* MFP optional */
+#define IW_AUTH_MFP_REQUIRED	2	/* MFP required */
+
+/* SIOCSIWENCODEEXT definitions */
+#define IW_ENCODE_SEQ_MAX_SIZE	8
+/* struct iw_encode_ext ->alg */
+#define IW_ENCODE_ALG_NONE	0
+#define IW_ENCODE_ALG_WEP	1
+#define IW_ENCODE_ALG_TKIP	2
+#define IW_ENCODE_ALG_CCMP	3
+#define IW_ENCODE_ALG_PMK	4
+#define IW_ENCODE_ALG_AES_CMAC	5
+/* struct iw_encode_ext ->ext_flags */
+#define IW_ENCODE_EXT_TX_SEQ_VALID	0x00000001
+#define IW_ENCODE_EXT_RX_SEQ_VALID	0x00000002
+#define IW_ENCODE_EXT_GROUP_KEY		0x00000004
+#define IW_ENCODE_EXT_SET_TX_KEY	0x00000008
+
+/* IWEVMICHAELMICFAILURE : struct iw_michaelmicfailure ->flags */
+#define IW_MICFAILURE_KEY_ID	0x00000003 /* Key ID 0..3 */
+#define IW_MICFAILURE_GROUP	0x00000004
+#define IW_MICFAILURE_PAIRWISE	0x00000008
+#define IW_MICFAILURE_STAKEY	0x00000010
+#define IW_MICFAILURE_COUNT	0x00000060 /* 1 or 2 (0 = count not supported)
+					    */
+
+/* Bit field values for enc_capa in struct iw_range */
+#define IW_ENC_CAPA_WPA		0x00000001
+#define IW_ENC_CAPA_WPA2	0x00000002
+#define IW_ENC_CAPA_CIPHER_TKIP	0x00000004
+#define IW_ENC_CAPA_CIPHER_CCMP	0x00000008
+#define IW_ENC_CAPA_4WAY_HANDSHAKE	0x00000010
+
+/* Event capability macros - in (struct iw_range *)->event_capa
+ * Because we have more than 32 possible events, we use an array of
+ * 32 bit bitmasks. Note : 32 bits = 0x20 = 2^5. */
+#define IW_EVENT_CAPA_BASE(cmd)		((cmd >= SIOCIWFIRSTPRIV) ? \
+					 (cmd - SIOCIWFIRSTPRIV + 0x60) : \
+					 (cmd - SIOCIWFIRST))
+#define IW_EVENT_CAPA_INDEX(cmd)	(IW_EVENT_CAPA_BASE(cmd) >> 5)
+#define IW_EVENT_CAPA_MASK(cmd)		(1 << (IW_EVENT_CAPA_BASE(cmd) & 0x1F))
+/* Event capability constants - event autogenerated by the kernel
+ * This list is valid for most 802.11 devices, customise as needed... */
+#define IW_EVENT_CAPA_K_0	(IW_EVENT_CAPA_MASK(0x8B04) | \
+				 IW_EVENT_CAPA_MASK(0x8B06) | \
+				 IW_EVENT_CAPA_MASK(0x8B1A))
+#define IW_EVENT_CAPA_K_1	(IW_EVENT_CAPA_MASK(0x8B2A))
+/* "Easy" macro to set events in iw_range (less efficient) */
+#define IW_EVENT_CAPA_SET(event_capa, cmd) (event_capa[IW_EVENT_CAPA_INDEX(cmd)] |= IW_EVENT_CAPA_MASK(cmd))
+#define IW_EVENT_CAPA_SET_KERNEL(event_capa) {event_capa[0] |= IW_EVENT_CAPA_K_0; event_capa[1] |= IW_EVENT_CAPA_K_1; }
+
+
+/****************************** TYPES ******************************/
+
+/* --------------------------- SUBTYPES --------------------------- */
+/*
+ *	Generic format for most parameters that fit in an int
+ */
+struct	iw_param
+{
+  __s32		value;		/* The value of the parameter itself */
+  __u8		fixed;		/* Hardware should not use auto select */
+  __u8		disabled;	/* Disable the feature */
+  __u16		flags;		/* Various specifc flags (if any) */
+};
+
+/*
+ *	For all data larger than 16 octets, we need to use a
+ *	pointer to memory allocated in user space.
+ */
+struct	iw_point
+{
+  void __user	*pointer;	/* Pointer to the data  (in user space) */
+  __u16		length;		/* number of fields or size in bytes */
+  __u16		flags;		/* Optional params */
+};
+
+
+/*
+ *	A frequency
+ *	For numbers lower than 10^9, we encode the number in 'm' and
+ *	set 'e' to 0
+ *	For number greater than 10^9, we divide it by the lowest power
+ *	of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
+ *	The power of 10 is in 'e', the result of the division is in 'm'.
+ */
+struct	iw_freq
+{
+	__s32		m;		/* Mantissa */
+	__s16		e;		/* Exponent */
+	__u8		i;		/* List index (when in range struct) */
+	__u8		flags;		/* Flags (fixed/auto) */
+};
+
+/*
+ *	Quality of the link
+ */
+struct	iw_quality
+{
+	__u8		qual;		/* link quality (%retries, SNR,
+					   %missed beacons or better...) */
+	__u8		level;		/* signal level (dBm) */
+	__u8		noise;		/* noise level (dBm) */
+	__u8		updated;	/* Flags to know if updated */
+};
+
+/*
+ *	Packet discarded in the wireless adapter due to
+ *	"wireless" specific problems...
+ *	Note : the list of counter and statistics in net_device_stats
+ *	is already pretty exhaustive, and you should use that first.
+ *	This is only additional stats...
+ */
+struct	iw_discarded
+{
+	__u32		nwid;		/* Rx : Wrong nwid/essid */
+	__u32		code;		/* Rx : Unable to code/decode (WEP) */
+	__u32		fragment;	/* Rx : Can't perform MAC reassembly */
+	__u32		retries;	/* Tx : Max MAC retries num reached */
+	__u32		misc;		/* Others cases */
+};
+
+/*
+ *	Packet/Time period missed in the wireless adapter due to
+ *	"wireless" specific problems...
+ */
+struct	iw_missed
+{
+	__u32		beacon;		/* Missed beacons/superframe */
+};
+
+/*
+ *	Quality range (for spy threshold)
+ */
+struct	iw_thrspy
+{
+	struct sockaddr		addr;		/* Source address (hw/mac) */
+	struct iw_quality	qual;		/* Quality of the link */
+	struct iw_quality	low;		/* Low threshold */
+	struct iw_quality	high;		/* High threshold */
+};
+
+/*
+ *	Optional data for scan request
+ *
+ *	Note: these optional parameters are controlling parameters for the
+ *	scanning behavior, these do not apply to getting scan results
+ *	(SIOCGIWSCAN). Drivers are expected to keep a local BSS table and
+ *	provide a merged results with all BSSes even if the previous scan
+ *	request limited scanning to a subset, e.g., by specifying an SSID.
+ *	Especially, scan results are required to include an entry for the
+ *	current BSS if the driver is in Managed mode and associated with an AP.
+ */
+struct	iw_scan_req
+{
+	__u8		scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
+	__u8		essid_len;
+	__u8		num_channels; /* num entries in channel_list;
+				       * 0 = scan all allowed channels */
+	__u8		flags; /* reserved as padding; use zero, this may
+				* be used in the future for adding flags
+				* to request different scan behavior */
+	struct sockaddr	bssid; /* ff:ff:ff:ff:ff:ff for broadcast BSSID or
+				* individual address of a specific BSS */
+
+	/*
+	 * Use this ESSID if IW_SCAN_THIS_ESSID flag is used instead of using
+	 * the current ESSID. This allows scan requests for specific ESSID
+	 * without having to change the current ESSID and potentially breaking
+	 * the current association.
+	 */
+	__u8		essid[IW_ESSID_MAX_SIZE];
+
+	/*
+	 * Optional parameters for changing the default scanning behavior.
+	 * These are based on the MLME-SCAN.request from IEEE Std 802.11.
+	 * TU is 1.024 ms. If these are set to 0, driver is expected to use
+	 * reasonable default values. min_channel_time defines the time that
+	 * will be used to wait for the first reply on each channel. If no
+	 * replies are received, next channel will be scanned after this. If
+	 * replies are received, total time waited on the channel is defined by
+	 * max_channel_time.
+	 */
+	__u32		min_channel_time; /* in TU */
+	__u32		max_channel_time; /* in TU */
+
+	struct iw_freq	channel_list[IW_MAX_FREQUENCIES];
+};
+
+/* ------------------------- WPA SUPPORT ------------------------- */
+
+/*
+ *	Extended data structure for get/set encoding (this is used with
+ *	SIOCSIWENCODEEXT/SIOCGIWENCODEEXT. struct iw_point and IW_ENCODE_*
+ *	flags are used in the same way as with SIOCSIWENCODE/SIOCGIWENCODE and
+ *	only the data contents changes (key data -> this structure, including
+ *	key data).
+ *
+ *	If the new key is the first group key, it will be set as the default
+ *	TX key. Otherwise, default TX key index is only changed if
+ *	IW_ENCODE_EXT_SET_TX_KEY flag is set.
+ *
+ *	Key will be changed with SIOCSIWENCODEEXT in all cases except for
+ *	special "change TX key index" operation which is indicated by setting
+ *	key_len = 0 and ext_flags |= IW_ENCODE_EXT_SET_TX_KEY.
+ *
+ *	tx_seq/rx_seq are only used when respective
+ *	IW_ENCODE_EXT_{TX,RX}_SEQ_VALID flag is set in ext_flags. Normal
+ *	TKIP/CCMP operation is to set RX seq with SIOCSIWENCODEEXT and start
+ *	TX seq from zero whenever key is changed. SIOCGIWENCODEEXT is normally
+ *	used only by an Authenticator (AP or an IBSS station) to get the
+ *	current TX sequence number. Using TX_SEQ_VALID for SIOCSIWENCODEEXT and
+ *	RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
+ *	debugging/testing.
+ */
+struct	iw_encode_ext
+{
+	__u32		ext_flags; /* IW_ENCODE_EXT_* */
+	__u8		tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+	__u8		rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+	struct sockaddr	addr; /* ff:ff:ff:ff:ff:ff for broadcast/multicast
+			       * (group) keys or unicast address for
+			       * individual keys */
+	__u16		alg; /* IW_ENCODE_ALG_* */
+	__u16		key_len;
+	__u8		key[0];
+};
+
+/* SIOCSIWMLME data */
+struct	iw_mlme
+{
+	__u16		cmd; /* IW_MLME_* */
+	__u16		reason_code;
+	struct sockaddr	addr;
+};
+
+/* SIOCSIWPMKSA data */
+#define IW_PMKSA_ADD		1
+#define IW_PMKSA_REMOVE		2
+#define IW_PMKSA_FLUSH		3
+
+#define IW_PMKID_LEN	16
+
+struct	iw_pmksa
+{
+	__u32		cmd; /* IW_PMKSA_* */
+	struct sockaddr	bssid;
+	__u8		pmkid[IW_PMKID_LEN];
+};
+
+/* IWEVMICHAELMICFAILURE data */
+struct	iw_michaelmicfailure
+{
+	__u32		flags;
+	struct sockaddr	src_addr;
+	__u8		tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
+};
+
+/* IWEVPMKIDCAND data */
+#define IW_PMKID_CAND_PREAUTH	0x00000001 /* RNS pre-authentication enabled */
+struct	iw_pmkid_cand
+{
+	__u32		flags; /* IW_PMKID_CAND_* */
+	__u32		index; /* the smaller the index, the higher the
+				* priority */
+	struct sockaddr	bssid;
+};
+
+/* ------------------------ WIRELESS STATS ------------------------ */
+/*
+ * Wireless statistics (used for /proc/net/wireless)
+ */
+struct	iw_statistics
+{
+	__u16		status;		/* Status
+					 * - device dependent for now */
+
+	struct iw_quality	qual;		/* Quality of the link
+						 * (instant/mean/max) */
+	struct iw_discarded	discard;	/* Packet discarded counts */
+	struct iw_missed	miss;		/* Packet missed counts */
+};
+
+/* ------------------------ IOCTL REQUEST ------------------------ */
+/*
+ * This structure defines the payload of an ioctl, and is used 
+ * below.
+ *
+ * Note that this structure should fit on the memory footprint
+ * of iwreq (which is the same as ifreq), which mean a max size of
+ * 16 octets = 128 bits. Warning, pointers might be 64 bits wide...
+ * You should check this when increasing the structures defined
+ * above in this file...
+ */
+union	iwreq_data
+{
+	/* Config - generic */
+	char		name[IFNAMSIZ];
+	/* Name : used to verify the presence of  wireless extensions.
+	 * Name of the protocol/provider... */
+
+	struct iw_point	essid;		/* Extended network name */
+	struct iw_param	nwid;		/* network id (or domain - the cell) */
+	struct iw_freq	freq;		/* frequency or channel :
+					 * 0-1000 = channel
+					 * > 1000 = frequency in Hz */
+
+	struct iw_param	sens;		/* signal level threshold */
+	struct iw_param	bitrate;	/* default bit rate */
+	struct iw_param	txpower;	/* default transmit power */
+	struct iw_param	rts;		/* RTS threshold threshold */
+	struct iw_param	frag;		/* Fragmentation threshold */
+	__u32		mode;		/* Operation mode */
+	struct iw_param	retry;		/* Retry limits & lifetime */
+
+	struct iw_point	encoding;	/* Encoding stuff : tokens */
+	struct iw_param	power;		/* PM duration/timeout */
+	struct iw_quality qual;		/* Quality part of statistics */
+
+	struct sockaddr	ap_addr;	/* Access point address */
+	struct sockaddr	addr;		/* Destination address (hw/mac) */
+
+	struct iw_param	param;		/* Other small parameters */
+	struct iw_point	data;		/* Other large parameters */
+};
+
+/*
+ * The structure to exchange data for ioctl.
+ * This structure is the same as 'struct ifreq', but (re)defined for
+ * convenience...
+ * Do I need to remind you about structure size (32 octets) ?
+ */
+struct	iwreq 
+{
+	union
+	{
+		char	ifrn_name[IFNAMSIZ];	/* if name, e.g. "eth0" */
+	} ifr_ifrn;
+
+	/* Data part (defined just above) */
+	union	iwreq_data	u;
+};
+
+/* -------------------------- IOCTL DATA -------------------------- */
+/*
+ *	For those ioctl which want to exchange mode data that what could
+ *	fit in the above structure...
+ */
+
+/*
+ *	Range of parameters
+ */
+
+struct	iw_range
+{
+	/* Informative stuff (to choose between different interface) */
+	__u32		throughput;	/* To give an idea... */
+	/* In theory this value should be the maximum benchmarked
+	 * TCP/IP throughput, because with most of these devices the
+	 * bit rate is meaningless (overhead an co) to estimate how
+	 * fast the connection will go and pick the fastest one.
+	 * I suggest people to play with Netperf or any benchmark...
+	 */
+
+	/* NWID (or domain id) */
+	__u32		min_nwid;	/* Minimal NWID we are able to set */
+	__u32		max_nwid;	/* Maximal NWID we are able to set */
+
+	/* Old Frequency (backward compat - moved lower ) */
+	__u16		old_num_channels;
+	__u8		old_num_frequency;
+
+	/* Scan capabilities */
+	__u8		scan_capa; 	/* IW_SCAN_CAPA_* bit field */
+
+	/* Wireless event capability bitmasks */
+	__u32		event_capa[6];
+
+	/* signal level threshold range */
+	__s32		sensitivity;
+
+	/* Quality of link & SNR stuff */
+	/* Quality range (link, level, noise)
+	 * If the quality is absolute, it will be in the range [0 ; max_qual],
+	 * if the quality is dBm, it will be in the range [max_qual ; 0].
+	 * Don't forget that we use 8 bit arithmetics... */
+	struct iw_quality	max_qual;	/* Quality of the link */
+	/* This should contain the average/typical values of the quality
+	 * indicator. This should be the threshold between a "good" and
+	 * a "bad" link (example : monitor going from green to orange).
+	 * Currently, user space apps like quality monitors don't have any
+	 * way to calibrate the measurement. With this, they can split
+	 * the range between 0 and max_qual in different quality level
+	 * (using a geometric subdivision centered on the average).
+	 * I expect that people doing the user space apps will feedback
+	 * us on which value we need to put in each driver... */
+	struct iw_quality	avg_qual;	/* Quality of the link */
+
+	/* Rates */
+	__u8		num_bitrates;	/* Number of entries in the list */
+	__s32		bitrate[IW_MAX_BITRATES];	/* list, in bps */
+
+	/* RTS threshold */
+	__s32		min_rts;	/* Minimal RTS threshold */
+	__s32		max_rts;	/* Maximal RTS threshold */
+
+	/* Frag threshold */
+	__s32		min_frag;	/* Minimal frag threshold */
+	__s32		max_frag;	/* Maximal frag threshold */
+
+	/* Power Management duration & timeout */
+	__s32		min_pmp;	/* Minimal PM period */
+	__s32		max_pmp;	/* Maximal PM period */
+	__s32		min_pmt;	/* Minimal PM timeout */
+	__s32		max_pmt;	/* Maximal PM timeout */
+	__u16		pmp_flags;	/* How to decode max/min PM period */
+	__u16		pmt_flags;	/* How to decode max/min PM timeout */
+	__u16		pm_capa;	/* What PM options are supported */
+
+	/* Encoder stuff */
+	__u16	encoding_size[IW_MAX_ENCODING_SIZES];	/* Different token sizes */
+	__u8	num_encoding_sizes;	/* Number of entry in the list */
+	__u8	max_encoding_tokens;	/* Max number of tokens */
+	/* For drivers that need a "login/passwd" form */
+	__u8	encoding_login_index;	/* token index for login token */
+
+	/* Transmit power */
+	__u16		txpower_capa;	/* What options are supported */
+	__u8		num_txpower;	/* Number of entries in the list */
+	__s32		txpower[IW_MAX_TXPOWER];	/* list, in bps */
+
+	/* Wireless Extension version info */
+	__u8		we_version_compiled;	/* Must be WIRELESS_EXT */
+	__u8		we_version_source;	/* Last update of source */
+
+	/* Retry limits and lifetime */
+	__u16		retry_capa;	/* What retry options are supported */
+	__u16		retry_flags;	/* How to decode max/min retry limit */
+	__u16		r_time_flags;	/* How to decode max/min retry life */
+	__s32		min_retry;	/* Minimal number of retries */
+	__s32		max_retry;	/* Maximal number of retries */
+	__s32		min_r_time;	/* Minimal retry lifetime */
+	__s32		max_r_time;	/* Maximal retry lifetime */
+
+	/* Frequency */
+	__u16		num_channels;	/* Number of channels [0; num - 1] */
+	__u8		num_frequency;	/* Number of entry in the list */
+	struct iw_freq	freq[IW_MAX_FREQUENCIES];	/* list */
+	/* Note : this frequency list doesn't need to fit channel numbers,
+	 * because each entry contain its channel index */
+
+	__u32		enc_capa;	/* IW_ENC_CAPA_* bit field */
+};
+
+/*
+ * Private ioctl interface information
+ */
+ 
+struct	iw_priv_args
+{
+	__u32		cmd;		/* Number of the ioctl to issue */
+	__u16		set_args;	/* Type and number of args */
+	__u16		get_args;	/* Type and number of args */
+	char		name[IFNAMSIZ];	/* Name of the extension */
+};
+
+/* ----------------------- WIRELESS EVENTS ----------------------- */
+/*
+ * Wireless events are carried through the rtnetlink socket to user
+ * space. They are encapsulated in the IFLA_WIRELESS field of
+ * a RTM_NEWLINK message.
+ */
+
+/*
+ * A Wireless Event. Contains basically the same data as the ioctl...
+ */
+struct iw_event
+{
+	__u16		len;			/* Real length of this stuff */
+	__u16		cmd;			/* Wireless IOCTL */
+	union iwreq_data	u;		/* IOCTL fixed payload */
+};
+
+/* Size of the Event prefix (including padding and alignement junk) */
+#define IW_EV_LCP_LEN	(sizeof(struct iw_event) - sizeof(union iwreq_data))
+/* Size of the various events */
+#define IW_EV_CHAR_LEN	(IW_EV_LCP_LEN + IFNAMSIZ)
+#define IW_EV_UINT_LEN	(IW_EV_LCP_LEN + sizeof(__u32))
+#define IW_EV_FREQ_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_LEN	(IW_EV_LCP_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_quality))
+
+/* iw_point events are special. First, the payload (extra data) come at
+ * the end of the event, so they are bigger than IW_EV_POINT_LEN. Second,
+ * we omit the pointer, so start at an offset. */
+#define IW_EV_POINT_OFF (((char *) &(((struct iw_point *) NULL)->length)) - \
+			  (char *) NULL)
+#define IW_EV_POINT_LEN	(IW_EV_LCP_LEN + sizeof(struct iw_point) - \
+			 IW_EV_POINT_OFF)
+
+
+/* Size of the Event prefix when packed in stream */
+#define IW_EV_LCP_PK_LEN	(4)
+/* Size of the various events when packed in stream */
+#define IW_EV_CHAR_PK_LEN	(IW_EV_LCP_PK_LEN + IFNAMSIZ)
+#define IW_EV_UINT_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(__u32))
+#define IW_EV_FREQ_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_freq))
+#define IW_EV_PARAM_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_param))
+#define IW_EV_ADDR_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct sockaddr))
+#define IW_EV_QUAL_PK_LEN	(IW_EV_LCP_PK_LEN + sizeof(struct iw_quality))
+#define IW_EV_POINT_PK_LEN	(IW_EV_LCP_PK_LEN + 4)
+
+#endif /* _UAPI_LINUX_WIRELESS_H */
diff --git a/include/linux/x25.h b/include/uapi/linux/x25.h
similarity index 100%
rename from include/linux/x25.h
rename to include/uapi/linux/x25.h
diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h
new file mode 100644
index 0000000..26607bd
--- /dev/null
+++ b/include/uapi/linux/xattr.h
@@ -0,0 +1,64 @@
+/*
+  File: linux/xattr.h
+
+  Extended attributes handling.
+
+  Copyright (C) 2001 by Andreas Gruenbacher <a.gruenbacher@computer.org>
+  Copyright (c) 2001-2002 Silicon Graphics, Inc.  All Rights Reserved.
+  Copyright (c) 2004 Red Hat, Inc., James Morris <jmorris@redhat.com>
+*/
+#ifndef _UAPI_LINUX_XATTR_H
+#define _UAPI_LINUX_XATTR_H
+
+#define XATTR_CREATE	0x1	/* set value, fail if attr already exists */
+#define XATTR_REPLACE	0x2	/* set value, fail if attr does not exist */
+
+/* Namespaces */
+#define XATTR_OS2_PREFIX "os2."
+#define XATTR_OS2_PREFIX_LEN (sizeof (XATTR_OS2_PREFIX) - 1)
+
+#define XATTR_SECURITY_PREFIX	"security."
+#define XATTR_SECURITY_PREFIX_LEN (sizeof (XATTR_SECURITY_PREFIX) - 1)
+
+#define XATTR_SYSTEM_PREFIX "system."
+#define XATTR_SYSTEM_PREFIX_LEN (sizeof (XATTR_SYSTEM_PREFIX) - 1)
+
+#define XATTR_TRUSTED_PREFIX "trusted."
+#define XATTR_TRUSTED_PREFIX_LEN (sizeof (XATTR_TRUSTED_PREFIX) - 1)
+
+#define XATTR_USER_PREFIX "user."
+#define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1)
+
+/* Security namespace */
+#define XATTR_EVM_SUFFIX "evm"
+#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX
+
+#define XATTR_IMA_SUFFIX "ima"
+#define XATTR_NAME_IMA XATTR_SECURITY_PREFIX XATTR_IMA_SUFFIX
+
+#define XATTR_SELINUX_SUFFIX "selinux"
+#define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX
+
+#define XATTR_SMACK_SUFFIX "SMACK64"
+#define XATTR_SMACK_IPIN "SMACK64IPIN"
+#define XATTR_SMACK_IPOUT "SMACK64IPOUT"
+#define XATTR_SMACK_EXEC "SMACK64EXEC"
+#define XATTR_SMACK_TRANSMUTE "SMACK64TRANSMUTE"
+#define XATTR_SMACK_MMAP "SMACK64MMAP"
+#define XATTR_NAME_SMACK XATTR_SECURITY_PREFIX XATTR_SMACK_SUFFIX
+#define XATTR_NAME_SMACKIPIN	XATTR_SECURITY_PREFIX XATTR_SMACK_IPIN
+#define XATTR_NAME_SMACKIPOUT	XATTR_SECURITY_PREFIX XATTR_SMACK_IPOUT
+#define XATTR_NAME_SMACKEXEC	XATTR_SECURITY_PREFIX XATTR_SMACK_EXEC
+#define XATTR_NAME_SMACKTRANSMUTE XATTR_SECURITY_PREFIX XATTR_SMACK_TRANSMUTE
+#define XATTR_NAME_SMACKMMAP XATTR_SECURITY_PREFIX XATTR_SMACK_MMAP
+
+#define XATTR_CAPS_SUFFIX "capability"
+#define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX
+
+#define XATTR_POSIX_ACL_ACCESS  "posix_acl_access"
+#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS
+#define XATTR_POSIX_ACL_DEFAULT  "posix_acl_default"
+#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT
+
+
+#endif /* _UAPI_LINUX_XATTR_H */
diff --git a/include/linux/xfrm.h b/include/uapi/linux/xfrm.h
similarity index 100%
rename from include/linux/xfrm.h
rename to include/uapi/linux/xfrm.h
diff --git a/include/uapi/xen/Kbuild b/include/uapi/xen/Kbuild
index aafaa5a..61257cb 100644
--- a/include/uapi/xen/Kbuild
+++ b/include/uapi/xen/Kbuild
@@ -1 +1,3 @@
 # UAPI Header export list
+header-y += evtchn.h
+header-y += privcmd.h
diff --git a/include/xen/evtchn.h b/include/uapi/xen/evtchn.h
similarity index 100%
rename from include/xen/evtchn.h
rename to include/uapi/xen/evtchn.h
diff --git a/include/xen/privcmd.h b/include/uapi/xen/privcmd.h
similarity index 100%
rename from include/xen/privcmd.h
rename to include/uapi/xen/privcmd.h
diff --git a/include/xen/Kbuild b/include/xen/Kbuild
index 84ad8f0..e69de29 100644
--- a/include/xen/Kbuild
+++ b/include/xen/Kbuild
@@ -1,2 +0,0 @@
-header-y += evtchn.h
-header-y += privcmd.h
diff --git a/include/xen/interface/hvm/hvm_op.h b/include/xen/interface/hvm/hvm_op.h
index a4827f4..956a046 100644
--- a/include/xen/interface/hvm/hvm_op.h
+++ b/include/xen/interface/hvm/hvm_op.h
@@ -43,4 +43,23 @@
 typedef struct xen_hvm_pagetable_dying xen_hvm_pagetable_dying_t;
 DEFINE_GUEST_HANDLE_STRUCT(xen_hvm_pagetable_dying_t);
  
+enum hvmmem_type_t {
+    HVMMEM_ram_rw,             /* Normal read/write guest RAM */
+    HVMMEM_ram_ro,             /* Read-only; writes are discarded */
+    HVMMEM_mmio_dm,            /* Reads and write go to the device model */
+};
+
+#define HVMOP_get_mem_type    15
+/* Return hvmmem_type_t for the specified pfn. */
+struct xen_hvm_get_mem_type {
+    /* Domain to be queried. */
+    domid_t domid;
+    /* OUT variable. */
+    uint16_t mem_type;
+    uint16_t pad[2]; /* align next field on 8-byte boundary */
+    /* IN variable. */
+    uint64_t pfn;
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_hvm_get_mem_type);
+
 #endif /* __XEN_PUBLIC_HVM_HVM_OP_H__ */
diff --git a/init/Kconfig b/init/Kconfig
index 4c93533..89e4cf6 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -496,6 +496,12 @@
 	  excluded from the global RCU state machine and thus doesn't
 	  to keep the timer tick on for RCU.
 
+	  Unless you want to hack and help the development of the full
+	  tickless feature, you shouldn't enable this option. It adds
+	  unnecessary overhead.
+
+	  If unsure say N
+
 config RCU_USER_QS_FORCE
 	bool "Force userspace extended QS by default"
 	depends on RCU_USER_QS
@@ -504,6 +510,12 @@
 	  test this feature that treats userspace as an extended quiescent
 	  state until we have a real user like a full adaptive nohz option.
 
+	  Unless you want to hack and help the development of the full
+	  tickless feature, you shouldn't enable this option. It adds
+	  unnecessary overhead.
+
+	  If unsure say N
+
 config RCU_FANOUT
 	int "Tree-based hierarchical RCU fanout value"
 	range 2 64 if 64BIT
diff --git a/init/do_mounts.c b/init/do_mounts.c
index d3f0aee..f8a6642 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -353,8 +353,9 @@
 
 void __init mount_block_root(char *name, int flags)
 {
-	char *fs_names = __getname_gfp(GFP_KERNEL
-		| __GFP_NOTRACK_FALSE_POSITIVE);
+	struct page *page = alloc_page(GFP_KERNEL |
+					__GFP_NOTRACK_FALSE_POSITIVE);
+	char *fs_names = page_address(page);
 	char *p;
 #ifdef CONFIG_BLOCK
 	char b[BDEVNAME_SIZE];
@@ -406,7 +407,7 @@
 #endif
 	panic("VFS: Unable to mount root fs on %s", b);
 out:
-	putname(fs_names);
+	put_page(page);
 }
  
 #ifdef CONFIG_ROOT_NFS
diff --git a/init/do_mounts_initrd.c b/init/do_mounts_initrd.c
index 135959a2..5e4ded5 100644
--- a/init/do_mounts_initrd.c
+++ b/init/do_mounts_initrd.c
@@ -16,13 +16,13 @@
 #include <linux/initrd.h>
 #include <linux/sched.h>
 #include <linux/freezer.h>
+#include <linux/kmod.h>
 
 #include "do_mounts.h"
 
 unsigned long initrd_start, initrd_end;
 int initrd_below_start_ok;
 unsigned int real_root_dev;	/* do_proc_dointvec cannot handle kdev_t */
-static int __initdata old_fd, root_fd;
 static int __initdata mount_initrd = 1;
 
 static int __init no_initrd(char *str)
@@ -33,33 +33,29 @@
 
 __setup("noinitrd", no_initrd);
 
-static int __init do_linuxrc(void *_shell)
+static int init_linuxrc(struct subprocess_info *info, struct cred *new)
 {
-	static const char *argv[] = { "linuxrc", NULL, };
-	extern const char *envp_init[];
-	const char *shell = _shell;
-
-	sys_close(old_fd);sys_close(root_fd);
+	sys_unshare(CLONE_FS | CLONE_FILES);
+	/* move initrd over / and chdir/chroot in initrd root */
+	sys_chdir("/root");
+	sys_mount(".", "/", NULL, MS_MOVE, NULL);
+	sys_chroot(".");
 	sys_setsid();
-	return kernel_execve(shell, argv, envp_init);
+	return 0;
 }
 
 static void __init handle_initrd(void)
 {
+	static char *argv[] = { "linuxrc", NULL, };
+	extern char *envp_init[];
 	int error;
-	int pid;
 
 	real_root_dev = new_encode_dev(ROOT_DEV);
 	create_dev("/dev/root.old", Root_RAM0);
 	/* mount initrd on rootfs' /root */
 	mount_block_root("/dev/root.old", root_mountflags & ~MS_RDONLY);
 	sys_mkdir("/old", 0700);
-	root_fd = sys_open("/", 0, 0);
-	old_fd = sys_open("/old", 0, 0);
-	/* move initrd over / and chdir/chroot in initrd root */
-	sys_chdir("/root");
-	sys_mount(".", "/", NULL, MS_MOVE, NULL);
-	sys_chroot(".");
+	sys_chdir("/old");
 
 	/*
 	 * In case that a resume from disk is carried out by linuxrc or one of
@@ -67,27 +63,22 @@
 	 */
 	current->flags |= PF_FREEZER_SKIP;
 
-	pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD);
-	if (pid > 0)
-		while (pid != sys_wait4(-1, NULL, 0, NULL))
-			yield();
+	call_usermodehelper_fns("/linuxrc", argv, envp_init, UMH_WAIT_PROC,
+			init_linuxrc, NULL, NULL);
 
 	current->flags &= ~PF_FREEZER_SKIP;
 
 	/* move initrd to rootfs' /old */
-	sys_fchdir(old_fd);
-	sys_mount("/", ".", NULL, MS_MOVE, NULL);
+	sys_mount("..", ".", NULL, MS_MOVE, NULL);
 	/* switch root and cwd back to / of rootfs */
-	sys_fchdir(root_fd);
-	sys_chroot(".");
-	sys_close(old_fd);
-	sys_close(root_fd);
+	sys_chroot("..");
 
 	if (new_decode_dev(real_root_dev) == Root_RAM0) {
 		sys_chdir("/old");
 		return;
 	}
 
+	sys_chdir("/");
 	ROOT_DEV = new_decode_dev(real_root_dev);
 	mount_root();
 
diff --git a/init/main.c b/init/main.c
index 313360f..9cf77ab 100644
--- a/init/main.c
+++ b/init/main.c
@@ -69,6 +69,7 @@
 #include <linux/slab.h>
 #include <linux/perf_event.h>
 #include <linux/file.h>
+#include <linux/ptrace.h>
 
 #include <asm/io.h>
 #include <asm/bugs.h>
@@ -791,17 +792,17 @@
 		do_one_initcall(*fn);
 }
 
-static void run_init_process(const char *init_filename)
+static int run_init_process(const char *init_filename)
 {
 	argv_init[0] = init_filename;
-	kernel_execve(init_filename, argv_init, envp_init);
+	return kernel_execve(init_filename, argv_init, envp_init);
 }
 
-/* This is a non __init function. Force it to be noinline otherwise gcc
- * makes it inline to init() and it becomes part of init.text section
- */
-static noinline int init_post(void)
+static void __init kernel_init_freeable(void);
+
+static int __ref kernel_init(void *unused)
 {
+	kernel_init_freeable();
 	/* need to finish all async __init code before freeing the memory */
 	async_synchronize_full();
 	free_initmem();
@@ -813,7 +814,8 @@
 	flush_delayed_fput();
 
 	if (ramdisk_execute_command) {
-		run_init_process(ramdisk_execute_command);
+		if (!run_init_process(ramdisk_execute_command))
+			return 0;
 		printk(KERN_WARNING "Failed to execute %s\n",
 				ramdisk_execute_command);
 	}
@@ -825,20 +827,22 @@
 	 * trying to recover a really broken machine.
 	 */
 	if (execute_command) {
-		run_init_process(execute_command);
+		if (!run_init_process(execute_command))
+			return 0;
 		printk(KERN_WARNING "Failed to execute %s.  Attempting "
 					"defaults...\n", execute_command);
 	}
-	run_init_process("/sbin/init");
-	run_init_process("/etc/init");
-	run_init_process("/bin/init");
-	run_init_process("/bin/sh");
+	if (!run_init_process("/sbin/init") ||
+	    !run_init_process("/etc/init") ||
+	    !run_init_process("/bin/init") ||
+	    !run_init_process("/bin/sh"))
+		return 0;
 
 	panic("No init found.  Try passing init= option to kernel. "
 	      "See Linux Documentation/init.txt for guidance.");
 }
 
-static int __init kernel_init(void * unused)
+static void __init kernel_init_freeable(void)
 {
 	/*
 	 * Wait until kthreadd is all set-up.
@@ -893,7 +897,4 @@
 	 * we're essentially up and running. Get rid of the
 	 * initmem segments and start the user-mode stuff..
 	 */
-
-	init_post();
-	return 0;
 }
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 6b97e24..71a3ca1 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -772,7 +772,7 @@
 {
 	struct path path;
 	struct file *filp;
-	char *name;
+	struct filename *name;
 	struct mq_attr attr;
 	int fd, error;
 	struct ipc_namespace *ipc_ns = current->nsproxy->ipc_ns;
@@ -795,7 +795,7 @@
 	ro = mnt_want_write(mnt);	/* we'll drop it in any case */
 	error = 0;
 	mutex_lock(&root->d_inode->i_mutex);
-	path.dentry = lookup_one_len(name, root, strlen(name));
+	path.dentry = lookup_one_len(name->name, root, strlen(name->name));
 	if (IS_ERR(path.dentry)) {
 		error = PTR_ERR(path.dentry);
 		goto out_putfd;
@@ -804,7 +804,7 @@
 
 	if (oflag & O_CREAT) {
 		if (path.dentry->d_inode) {	/* entry already exists */
-			audit_inode(name, path.dentry);
+			audit_inode(name, path.dentry, 0);
 			if (oflag & O_EXCL) {
 				error = -EEXIST;
 				goto out;
@@ -824,7 +824,7 @@
 			error = -ENOENT;
 			goto out;
 		}
-		audit_inode(name, path.dentry);
+		audit_inode(name, path.dentry, 0);
 		filp = do_open(&path, oflag);
 	}
 
@@ -849,7 +849,7 @@
 SYSCALL_DEFINE1(mq_unlink, const char __user *, u_name)
 {
 	int err;
-	char *name;
+	struct filename *name;
 	struct dentry *dentry;
 	struct inode *inode = NULL;
 	struct ipc_namespace *ipc_ns = current->nsproxy->ipc_ns;
@@ -863,7 +863,8 @@
 	if (err)
 		goto out_name;
 	mutex_lock_nested(&mnt->mnt_root->d_inode->i_mutex, I_MUTEX_PARENT);
-	dentry = lookup_one_len(name, mnt->mnt_root, strlen(name));
+	dentry = lookup_one_len(name->name, mnt->mnt_root,
+				strlen(name->name));
 	if (IS_ERR(dentry)) {
 		err = PTR_ERR(dentry);
 		goto out_unlock;
@@ -978,7 +979,7 @@
 		goto out_fput;
 	}
 	info = MQUEUE_I(inode);
-	audit_inode(NULL, f.file->f_path.dentry);
+	audit_inode(NULL, f.file->f_path.dentry, 0);
 
 	if (unlikely(!(f.file->f_mode & FMODE_WRITE))) {
 		ret = -EBADF;
@@ -1094,7 +1095,7 @@
 		goto out_fput;
 	}
 	info = MQUEUE_I(inode);
-	audit_inode(NULL, f.file->f_path.dentry);
+	audit_inode(NULL, f.file->f_path.dentry, 0);
 
 	if (unlikely(!(f.file->f_mode & FMODE_READ))) {
 		ret = -EBADF;
diff --git a/kernel/acct.c b/kernel/acct.c
index 6cd7529..051e071 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -193,7 +193,7 @@
 	}
 }
 
-static int acct_on(char *name)
+static int acct_on(struct filename *pathname)
 {
 	struct file *file;
 	struct vfsmount *mnt;
@@ -201,7 +201,7 @@
 	struct bsd_acct_struct *acct = NULL;
 
 	/* Difference from BSD - they don't do O_APPEND */
-	file = filp_open(name, O_WRONLY|O_APPEND|O_LARGEFILE, 0);
+	file = file_open_name(pathname, O_WRONLY|O_APPEND|O_LARGEFILE, 0);
 	if (IS_ERR(file))
 		return PTR_ERR(file);
 
@@ -260,7 +260,7 @@
 		return -EPERM;
 
 	if (name) {
-		char *tmp = getname(name);
+		struct filename *tmp = getname(name);
 		if (IS_ERR(tmp))
 			return (PTR_ERR(tmp));
 		error = acct_on(tmp);
diff --git a/kernel/audit.h b/kernel/audit.h
index 9eb3d79..d51cba8 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -74,12 +74,15 @@
 	return (ino & (AUDIT_INODE_BUCKETS-1));
 }
 
+/* Indicates that audit should log the full pathname. */
+#define AUDIT_NAME_FULL -1
+
 extern int audit_match_class(int class, unsigned syscall);
 extern int audit_comparator(const u32 left, const u32 op, const u32 right);
 extern int audit_uid_comparator(kuid_t left, u32 op, kuid_t right);
 extern int audit_gid_comparator(kgid_t left, u32 op, kgid_t right);
-extern int audit_compare_dname_path(const char *dname, const char *path,
-				    int *dirlen);
+extern int parent_len(const char *path);
+extern int audit_compare_dname_path(const char *dname, const char *path, int plen);
 extern struct sk_buff *	    audit_make_reply(int pid, int seq, int type,
 					     int done, int multi,
 					     const void *payload, int size);
diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c
index 1c22ec3..9a9ae6e 100644
--- a/kernel/audit_watch.c
+++ b/kernel/audit_watch.c
@@ -265,7 +265,8 @@
 	/* Run all of the watches on this parent looking for the one that
 	 * matches the given dname */
 	list_for_each_entry_safe(owatch, nextw, &parent->watches, wlist) {
-		if (audit_compare_dname_path(dname, owatch->path, NULL))
+		if (audit_compare_dname_path(dname, owatch->path,
+					     AUDIT_NAME_FULL))
 			continue;
 
 		/* If the update involves invalidating rules, do the inode-based
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index c4bcdba..7f19f23 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1298,41 +1298,60 @@
 	}
 }
 
-/* Compare given dentry name with last component in given path,
- * return of 0 indicates a match. */
-int audit_compare_dname_path(const char *dname, const char *path,
-			     int *dirlen)
+/**
+ * parent_len - find the length of the parent portion of a pathname
+ * @path: pathname of which to determine length
+ */
+int parent_len(const char *path)
 {
-	int dlen, plen;
+	int plen;
 	const char *p;
 
-	if (!dname || !path)
-		return 1;
-
-	dlen = strlen(dname);
 	plen = strlen(path);
-	if (plen < dlen)
-		return 1;
+
+	if (plen == 0)
+		return plen;
 
 	/* disregard trailing slashes */
 	p = path + plen - 1;
 	while ((*p == '/') && (p > path))
 		p--;
 
-	/* find last path component */
-	p = p - dlen + 1;
-	if (p < path)
-		return 1;
-	else if (p > path) {
-		if (*--p != '/')
-			return 1;
-		else
-			p++;
-	}
+	/* walk backward until we find the next slash or hit beginning */
+	while ((*p != '/') && (p > path))
+		p--;
 
-	/* return length of path's directory component */
-	if (dirlen)
-		*dirlen = p - path;
+	/* did we find a slash? Then increment to include it in path */
+	if (*p == '/')
+		p++;
+
+	return p - path;
+}
+
+/**
+ * audit_compare_dname_path - compare given dentry name with last component in
+ * 			      given path. Return of 0 indicates a match.
+ * @dname:	dentry name that we're comparing
+ * @path:	full pathname that we're comparing
+ * @parentlen:	length of the parent if known. Passing in AUDIT_NAME_FULL
+ * 		here indicates that we must compute this value.
+ */
+int audit_compare_dname_path(const char *dname, const char *path, int parentlen)
+{
+	int dlen, pathlen;
+	const char *p;
+
+	dlen = strlen(dname);
+	pathlen = strlen(path);
+	if (pathlen < dlen)
+		return 1;
+
+	parentlen = parentlen == AUDIT_NAME_FULL ? parent_len(path) : parentlen;
+	if (pathlen - parentlen != dlen)
+		return 1;
+
+	p = path + parentlen;
+
 	return strncmp(p, dname, dlen);
 }
 
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index f4a7756..2f186ed 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -81,9 +81,6 @@
  * a name dynamically and also add those to the list anchored by names_list. */
 #define AUDIT_NAMES	5
 
-/* Indicates that audit should log the full pathname. */
-#define AUDIT_NAME_FULL -1
-
 /* no execve audit message should be longer than this (userspace limits) */
 #define MAX_EXECVE_AUDIT_LEN 7500
 
@@ -106,27 +103,29 @@
  * we don't let putname() free it (instead we free all of the saved
  * pointers at syscall exit time).
  *
- * Further, in fs/namei.c:path_lookup() we store the inode and device. */
+ * Further, in fs/namei.c:path_lookup() we store the inode and device.
+ */
 struct audit_names {
-	struct list_head list;		/* audit_context->names_list */
-	const char	*name;
-	unsigned long	ino;
-	dev_t		dev;
-	umode_t		mode;
-	kuid_t		uid;
-	kgid_t		gid;
-	dev_t		rdev;
-	u32		osid;
-	struct audit_cap_data fcap;
-	unsigned int	fcap_ver;
-	int		name_len;	/* number of name's characters to log */
-	bool		name_put;	/* call __putname() for this name */
+	struct list_head	list;		/* audit_context->names_list */
+	struct filename	*name;
+	unsigned long		ino;
+	dev_t			dev;
+	umode_t			mode;
+	kuid_t			uid;
+	kgid_t			gid;
+	dev_t			rdev;
+	u32			osid;
+	struct audit_cap_data	 fcap;
+	unsigned int		fcap_ver;
+	int			name_len;	/* number of name's characters to log */
+	unsigned char		type;		/* record type */
+	bool			name_put;	/* call __putname() for this name */
 	/*
 	 * This was an allocated audit_names and not from the array of
 	 * names allocated in the task audit context.  Thus this name
 	 * should be freed on syscall exit
 	 */
-	bool		should_free;
+	bool			should_free;
 };
 
 struct audit_aux_data {
@@ -998,7 +997,7 @@
 		       context->ino_count);
 		list_for_each_entry(n, &context->names_list, list) {
 			printk(KERN_ERR "names[%d] = %p = %s\n", i,
-			       n->name, n->name ?: "(null)");
+			       n->name, n->name->name ?: "(null)");
 		}
 		dump_stack();
 		return;
@@ -1555,7 +1554,7 @@
 		case AUDIT_NAME_FULL:
 			/* log the full path */
 			audit_log_format(ab, " name=");
-			audit_log_untrustedstring(ab, n->name);
+			audit_log_untrustedstring(ab, n->name->name);
 			break;
 		case 0:
 			/* name was specified as a relative path and the
@@ -1565,7 +1564,7 @@
 		default:
 			/* log the name's directory component */
 			audit_log_format(ab, " name=");
-			audit_log_n_untrustedstring(ab, n->name,
+			audit_log_n_untrustedstring(ab, n->name->name,
 						    n->name_len);
 		}
 	} else
@@ -1995,7 +1994,8 @@
 #endif
 }
 
-static struct audit_names *audit_alloc_name(struct audit_context *context)
+static struct audit_names *audit_alloc_name(struct audit_context *context,
+						unsigned char type)
 {
 	struct audit_names *aname;
 
@@ -2010,6 +2010,7 @@
 	}
 
 	aname->ino = (unsigned long)-1;
+	aname->type = type;
 	list_add_tail(&aname->list, &context->names_list);
 
 	context->name_count++;
@@ -2020,13 +2021,36 @@
 }
 
 /**
+ * audit_reusename - fill out filename with info from existing entry
+ * @uptr: userland ptr to pathname
+ *
+ * Search the audit_names list for the current audit context. If there is an
+ * existing entry with a matching "uptr" then return the filename
+ * associated with that audit_name. If not, return NULL.
+ */
+struct filename *
+__audit_reusename(const __user char *uptr)
+{
+	struct audit_context *context = current->audit_context;
+	struct audit_names *n;
+
+	list_for_each_entry(n, &context->names_list, list) {
+		if (!n->name)
+			continue;
+		if (n->name->uptr == uptr)
+			return n->name;
+	}
+	return NULL;
+}
+
+/**
  * audit_getname - add a name to the list
  * @name: name to add
  *
  * Add a name to the list of audit names for this context.
  * Called from fs/namei.c:getname().
  */
-void __audit_getname(const char *name)
+void __audit_getname(struct filename *name)
 {
 	struct audit_context *context = current->audit_context;
 	struct audit_names *n;
@@ -2040,13 +2064,19 @@
 		return;
 	}
 
-	n = audit_alloc_name(context);
+#if AUDIT_DEBUG
+	/* The filename _must_ have a populated ->name */
+	BUG_ON(!name->name);
+#endif
+
+	n = audit_alloc_name(context, AUDIT_TYPE_UNKNOWN);
 	if (!n)
 		return;
 
 	n->name = name;
 	n->name_len = AUDIT_NAME_FULL;
 	n->name_put = true;
+	name->aname = n;
 
 	if (!context->pwd.dentry)
 		get_fs_pwd(current->fs, &context->pwd);
@@ -2059,7 +2089,7 @@
  * then we delay the putname until syscall exit.
  * Called from include/linux/fs.h:putname().
  */
-void audit_putname(const char *name)
+void audit_putname(struct filename *name)
 {
 	struct audit_context *context = current->audit_context;
 
@@ -2074,7 +2104,7 @@
 
 			list_for_each_entry(n, &context->names_list, list)
 				printk(KERN_ERR "name[%d] = %p = %s\n", i,
-				       n->name, n->name ?: "(null)");
+				       n->name, n->name->name ?: "(null)");
 			}
 #endif
 		__putname(name);
@@ -2088,8 +2118,8 @@
 			       " put_count=%d\n",
 			       __FILE__, __LINE__,
 			       context->serial, context->major,
-			       context->in_syscall, name, context->name_count,
-			       context->put_count);
+			       context->in_syscall, name->name,
+			       context->name_count, context->put_count);
 			dump_stack();
 		}
 	}
@@ -2132,13 +2162,13 @@
 }
 
 /**
- * audit_inode - store the inode and device from a lookup
+ * __audit_inode - store the inode and device from a lookup
  * @name: name being audited
  * @dentry: dentry being audited
- *
- * Called from fs/namei.c:path_lookup().
+ * @parent: does this dentry represent the parent?
  */
-void __audit_inode(const char *name, const struct dentry *dentry)
+void __audit_inode(struct filename *name, const struct dentry *dentry,
+		   unsigned int parent)
 {
 	struct audit_context *context = current->audit_context;
 	const struct inode *inode = dentry->d_inode;
@@ -2147,24 +2177,69 @@
 	if (!context->in_syscall)
 		return;
 
-	list_for_each_entry_reverse(n, &context->names_list, list) {
-		if (n->name && (n->name == name))
-			goto out;
+	if (!name)
+		goto out_alloc;
+
+#if AUDIT_DEBUG
+	/* The struct filename _must_ have a populated ->name */
+	BUG_ON(!name->name);
+#endif
+	/*
+	 * If we have a pointer to an audit_names entry already, then we can
+	 * just use it directly if the type is correct.
+	 */
+	n = name->aname;
+	if (n) {
+		if (parent) {
+			if (n->type == AUDIT_TYPE_PARENT ||
+			    n->type == AUDIT_TYPE_UNKNOWN)
+				goto out;
+		} else {
+			if (n->type != AUDIT_TYPE_PARENT)
+				goto out;
+		}
 	}
 
-	/* unable to find the name from a previous getname() */
-	n = audit_alloc_name(context);
+	list_for_each_entry_reverse(n, &context->names_list, list) {
+		/* does the name pointer match? */
+		if (!n->name || n->name->name != name->name)
+			continue;
+
+		/* match the correct record type */
+		if (parent) {
+			if (n->type == AUDIT_TYPE_PARENT ||
+			    n->type == AUDIT_TYPE_UNKNOWN)
+				goto out;
+		} else {
+			if (n->type != AUDIT_TYPE_PARENT)
+				goto out;
+		}
+	}
+
+out_alloc:
+	/* unable to find the name from a previous getname(). Allocate a new
+	 * anonymous entry.
+	 */
+	n = audit_alloc_name(context, AUDIT_TYPE_NORMAL);
 	if (!n)
 		return;
 out:
+	if (parent) {
+		n->name_len = n->name ? parent_len(n->name->name) : AUDIT_NAME_FULL;
+		n->type = AUDIT_TYPE_PARENT;
+	} else {
+		n->name_len = AUDIT_NAME_FULL;
+		n->type = AUDIT_TYPE_NORMAL;
+	}
 	handle_path(dentry);
 	audit_copy_inode(n, dentry, inode);
 }
 
 /**
- * audit_inode_child - collect inode info for created/removed objects
- * @dentry: dentry being audited
+ * __audit_inode_child - collect inode info for created/removed objects
  * @parent: inode of dentry parent
+ * @dentry: dentry being audited
+ * @type:   AUDIT_TYPE_* value that we're looking for
  *
  * For syscalls that create or remove filesystem objects, audit_inode
  * can only collect information for the filesystem object's parent.
@@ -2174,15 +2249,14 @@
  * must be hooked prior, in order to capture the target inode during
  * unsuccessful attempts.
  */
-void __audit_inode_child(const struct dentry *dentry,
-			 const struct inode *parent)
+void __audit_inode_child(const struct inode *parent,
+			 const struct dentry *dentry,
+			 const unsigned char type)
 {
 	struct audit_context *context = current->audit_context;
-	const char *found_parent = NULL, *found_child = NULL;
 	const struct inode *inode = dentry->d_inode;
 	const char *dname = dentry->d_name.name;
-	struct audit_names *n;
-	int dirlen = 0;
+	struct audit_names *n, *found_parent = NULL, *found_child = NULL;
 
 	if (!context->in_syscall)
 		return;
@@ -2190,62 +2264,65 @@
 	if (inode)
 		handle_one(inode);
 
-	/* parent is more likely, look for it first */
+	/* look for a parent entry first */
 	list_for_each_entry(n, &context->names_list, list) {
-		if (!n->name)
+		if (!n->name || n->type != AUDIT_TYPE_PARENT)
 			continue;
 
 		if (n->ino == parent->i_ino &&
-		    !audit_compare_dname_path(dname, n->name, &dirlen)) {
-			n->name_len = dirlen; /* update parent data in place */
-			found_parent = n->name;
-			goto add_names;
+		    !audit_compare_dname_path(dname, n->name->name, n->name_len)) {
+			found_parent = n;
+			break;
 		}
 	}
 
-	/* no matching parent, look for matching child */
+	/* is there a matching child entry? */
 	list_for_each_entry(n, &context->names_list, list) {
-		if (!n->name)
+		/* can only match entries that have a name */
+		if (!n->name || n->type != type)
 			continue;
 
-		/* strcmp() is the more likely scenario */
-		if (!strcmp(dname, n->name) ||
-		     !audit_compare_dname_path(dname, n->name, &dirlen)) {
-			if (inode)
-				audit_copy_inode(n, NULL, inode);
-			else
-				n->ino = (unsigned long)-1;
-			found_child = n->name;
-			goto add_names;
+		/* if we found a parent, make sure this one is a child of it */
+		if (found_parent && (n->name != found_parent->name))
+			continue;
+
+		if (!strcmp(dname, n->name->name) ||
+		    !audit_compare_dname_path(dname, n->name->name,
+						found_parent ?
+						found_parent->name_len :
+						AUDIT_NAME_FULL)) {
+			found_child = n;
+			break;
 		}
 	}
 
-add_names:
 	if (!found_parent) {
-		n = audit_alloc_name(context);
+		/* create a new, "anonymous" parent record */
+		n = audit_alloc_name(context, AUDIT_TYPE_PARENT);
 		if (!n)
 			return;
 		audit_copy_inode(n, NULL, parent);
 	}
 
 	if (!found_child) {
-		n = audit_alloc_name(context);
-		if (!n)
+		found_child = audit_alloc_name(context, type);
+		if (!found_child)
 			return;
 
 		/* Re-use the name belonging to the slot for a matching parent
 		 * directory. All names for this context are relinquished in
 		 * audit_free_names() */
 		if (found_parent) {
-			n->name = found_parent;
-			n->name_len = AUDIT_NAME_FULL;
+			found_child->name = found_parent->name;
+			found_child->name_len = AUDIT_NAME_FULL;
 			/* don't call __putname() */
-			n->name_put = false;
+			found_child->name_put = false;
 		}
-
-		if (inode)
-			audit_copy_inode(n, NULL, inode);
 	}
+	if (inode)
+		audit_copy_inode(found_child, dentry, inode);
+	else
+		found_child->ino = (unsigned long)-1;
 }
 EXPORT_SYMBOL_GPL(__audit_inode_child);
 
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 17e073c..9a61738 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -696,6 +696,22 @@
 	return ret;
 }
 
+/*
+ * GDB places a breakpoint at this function to know dynamically
+ * loaded objects. It's not defined static so that only one instance with this
+ * name exists in the kernel.
+ */
+
+static int module_event(struct notifier_block *self, unsigned long val,
+	void *data)
+{
+	return 0;
+}
+
+static struct notifier_block dbg_module_load_nb = {
+	.notifier_call	= module_event,
+};
+
 int kgdb_nmicallback(int cpu, void *regs)
 {
 #ifdef CONFIG_SMP
@@ -824,6 +840,7 @@
 		kgdb_arch_init();
 		if (!dbg_is_early)
 			kgdb_arch_late();
+		register_module_notifier(&dbg_module_load_nb);
 		register_reboot_notifier(&dbg_reboot_notifier);
 		atomic_notifier_chain_register(&panic_notifier_list,
 					       &kgdb_panic_event_nb);
@@ -847,6 +864,7 @@
 	if (kgdb_io_module_registered) {
 		kgdb_io_module_registered = 0;
 		unregister_reboot_notifier(&dbg_reboot_notifier);
+		unregister_module_notifier(&dbg_module_load_nb);
 		atomic_notifier_chain_unregister(&panic_notifier_list,
 					       &kgdb_panic_event_nb);
 		kgdb_arch_exit();
diff --git a/kernel/debug/kdb/kdb_bt.c b/kernel/debug/kdb/kdb_bt.c
index 07c9bbb..b03e0e8 100644
--- a/kernel/debug/kdb/kdb_bt.c
+++ b/kernel/debug/kdb/kdb_bt.c
@@ -129,6 +129,8 @@
 		}
 		/* Now the inactive tasks */
 		kdb_do_each_thread(g, p) {
+			if (KDB_FLAG(CMD_INTERRUPT))
+				return 0;
 			if (task_curr(p))
 				continue;
 			if (kdb_bt1(p, mask, argcount, btaprompt))
diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 0a69d2a..14ff484 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -552,6 +552,7 @@
 {
 	int diag;
 	int linecount;
+	int colcount;
 	int logging, saved_loglevel = 0;
 	int saved_trap_printk;
 	int got_printf_lock = 0;
@@ -584,6 +585,10 @@
 	if (diag || linecount <= 1)
 		linecount = 24;
 
+	diag = kdbgetintenv("COLUMNS", &colcount);
+	if (diag || colcount <= 1)
+		colcount = 80;
+
 	diag = kdbgetintenv("LOGGING", &logging);
 	if (diag)
 		logging = 0;
@@ -690,7 +695,7 @@
 		gdbstub_msg_write(kdb_buffer, retlen);
 	} else {
 		if (dbg_io_ops && !dbg_io_ops->is_console) {
-			len = strlen(kdb_buffer);
+			len = retlen;
 			cp = kdb_buffer;
 			while (len--) {
 				dbg_io_ops->write_char(*cp);
@@ -709,11 +714,29 @@
 		printk(KERN_INFO "%s", kdb_buffer);
 	}
 
-	if (KDB_STATE(PAGER) && strchr(kdb_buffer, '\n'))
-		kdb_nextline++;
+	if (KDB_STATE(PAGER)) {
+		/*
+		 * Check printed string to decide how to bump the
+		 * kdb_nextline to control when the more prompt should
+		 * show up.
+		 */
+		int got = 0;
+		len = retlen;
+		while (len--) {
+			if (kdb_buffer[len] == '\n') {
+				kdb_nextline++;
+				got = 0;
+			} else if (kdb_buffer[len] == '\r') {
+				got = 0;
+			} else {
+				got++;
+			}
+		}
+		kdb_nextline += got / (colcount + 1);
+	}
 
 	/* check for having reached the LINES number of printed lines */
-	if (kdb_nextline == linecount) {
+	if (kdb_nextline >= linecount) {
 		char buf1[16] = "";
 
 		/* Watch out for recursion here.  Any routine that calls
@@ -765,7 +788,7 @@
 			kdb_grepping_flag = 0;
 			kdb_printf("\n");
 		} else if (buf1[0] == ' ') {
-			kdb_printf("\n");
+			kdb_printf("\r");
 			suspend_grep = 1; /* for this recursion */
 		} else if (buf1[0] == '\n') {
 			kdb_nextline = linecount - 1;
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 1261dc7..4d5f8d5 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -2101,6 +2101,8 @@
 		}
 		if (!lines--)
 			break;
+		if (KDB_FLAG(CMD_INTERRUPT))
+			return 0;
 
 		kdb_printf("%.*s\n", (int)len - 1, buf);
 	}
diff --git a/kernel/events/core.c b/kernel/events/core.c
index cda3ebd..dbccf83 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -372,6 +372,8 @@
 
 	list_for_each_entry_rcu(pmu, &pmus, entry) {
 		cpuctx = this_cpu_ptr(pmu->pmu_cpu_context);
+		if (cpuctx->unique_pmu != pmu)
+			continue; /* ensure we process each cpuctx once */
 
 		/*
 		 * perf_cgroup_events says at least one
@@ -395,9 +397,10 @@
 
 			if (mode & PERF_CGROUP_SWIN) {
 				WARN_ON_ONCE(cpuctx->cgrp);
-				/* set cgrp before ctxsw in to
-				 * allow event_filter_match() to not
-				 * have to pass task around
+				/*
+				 * set cgrp before ctxsw in to allow
+				 * event_filter_match() to not have to pass
+				 * task around
 				 */
 				cpuctx->cgrp = perf_cgroup_from_task(task);
 				cpu_ctx_sched_in(cpuctx, EVENT_ALL, task);
@@ -4412,7 +4415,7 @@
 	rcu_read_lock();
 	list_for_each_entry_rcu(pmu, &pmus, entry) {
 		cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
-		if (cpuctx->active_pmu != pmu)
+		if (cpuctx->unique_pmu != pmu)
 			goto next;
 		perf_event_task_ctx(&cpuctx->ctx, task_event);
 
@@ -4558,7 +4561,7 @@
 	rcu_read_lock();
 	list_for_each_entry_rcu(pmu, &pmus, entry) {
 		cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
-		if (cpuctx->active_pmu != pmu)
+		if (cpuctx->unique_pmu != pmu)
 			goto next;
 		perf_event_comm_ctx(&cpuctx->ctx, comm_event);
 
@@ -4754,7 +4757,7 @@
 	rcu_read_lock();
 	list_for_each_entry_rcu(pmu, &pmus, entry) {
 		cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
-		if (cpuctx->active_pmu != pmu)
+		if (cpuctx->unique_pmu != pmu)
 			goto next;
 		perf_event_mmap_ctx(&cpuctx->ctx, mmap_event,
 					vma->vm_flags & VM_EXEC);
@@ -5855,8 +5858,8 @@
 
 		cpuctx = per_cpu_ptr(pmu->pmu_cpu_context, cpu);
 
-		if (cpuctx->active_pmu == old_pmu)
-			cpuctx->active_pmu = pmu;
+		if (cpuctx->unique_pmu == old_pmu)
+			cpuctx->unique_pmu = pmu;
 	}
 }
 
@@ -5991,7 +5994,7 @@
 		cpuctx->ctx.pmu = pmu;
 		cpuctx->jiffies_interval = 1;
 		INIT_LIST_HEAD(&cpuctx->rotation_list);
-		cpuctx->active_pmu = pmu;
+		cpuctx->unique_pmu = pmu;
 	}
 
 got_cpu_context:
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 6f99aea..1c317e3 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -37,6 +37,7 @@
 #include <linux/notifier.h>
 #include <linux/suspend.h>
 #include <linux/rwsem.h>
+#include <linux/ptrace.h>
 #include <asm/uaccess.h>
 
 #include <trace/events/module.h>
@@ -221,11 +222,13 @@
 	retval = kernel_execve(sub_info->path,
 			       (const char *const *)sub_info->argv,
 			       (const char *const *)sub_info->envp);
+	if (!retval)
+		return 0;
 
 	/* Exec failed? */
 fail:
 	sub_info->retval = retval;
-	return 0;
+	do_exit(0);
 }
 
 static int call_helper(void *data)
@@ -292,7 +295,7 @@
 	}
 
 	umh_complete(sub_info);
-	return 0;
+	do_exit(0);
 }
 
 /* This is run by khelper thread  */
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 146a6fa..29fb60c 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -16,6 +16,7 @@
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/freezer.h>
+#include <linux/ptrace.h>
 #include <trace/events/sched.h>
 
 static DEFINE_SPINLOCK(kthread_create_lock);
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 4fb2376..74df86b 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -74,6 +74,7 @@
 	.orphan_nxttail = &sname##_state.orphan_nxtlist, \
 	.orphan_donetail = &sname##_state.orphan_donelist, \
 	.barrier_mutex = __MUTEX_INITIALIZER(sname##_state.barrier_mutex), \
+	.onoff_mutex = __MUTEX_INITIALIZER(sname##_state.onoff_mutex), \
 	.name = #sname, \
 }
 
@@ -1197,7 +1198,7 @@
 	raw_spin_unlock_irq(&rnp->lock);
 
 	/* Exclude any concurrent CPU-hotplug operations. */
-	get_online_cpus();
+	mutex_lock(&rsp->onoff_mutex);
 
 	/*
 	 * Set the quiescent-state-needed bits in all the rcu_node
@@ -1234,7 +1235,7 @@
 		cond_resched();
 	}
 
-	put_online_cpus();
+	mutex_unlock(&rsp->onoff_mutex);
 	return 1;
 }
 
@@ -1700,6 +1701,7 @@
 	/* Remove the dead CPU from the bitmasks in the rcu_node hierarchy. */
 
 	/* Exclude any attempts to start a new grace period. */
+	mutex_lock(&rsp->onoff_mutex);
 	raw_spin_lock_irqsave(&rsp->onofflock, flags);
 
 	/* Orphan the dead CPU's callbacks, and adopt them if appropriate. */
@@ -1744,6 +1746,7 @@
 	init_callback_list(rdp);
 	/* Disallow further callbacks on this CPU. */
 	rdp->nxttail[RCU_NEXT_TAIL] = NULL;
+	mutex_unlock(&rsp->onoff_mutex);
 }
 
 #else /* #ifdef CONFIG_HOTPLUG_CPU */
@@ -2648,6 +2651,9 @@
 	struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
 	struct rcu_node *rnp = rcu_get_root(rsp);
 
+	/* Exclude new grace periods. */
+	mutex_lock(&rsp->onoff_mutex);
+
 	/* Set up local state, ensuring consistent view of global state. */
 	raw_spin_lock_irqsave(&rnp->lock, flags);
 	rdp->beenonline = 1;	 /* We have now been online. */
@@ -2662,14 +2668,6 @@
 	rcu_prepare_for_idle_init(cpu);
 	raw_spin_unlock(&rnp->lock);		/* irqs remain disabled. */
 
-	/*
-	 * A new grace period might start here.  If so, we won't be part
-	 * of it, but that is OK, as we are currently in a quiescent state.
-	 */
-
-	/* Exclude any attempts to start a new GP on large systems. */
-	raw_spin_lock(&rsp->onofflock);		/* irqs already disabled. */
-
 	/* Add CPU to rcu_node bitmasks. */
 	rnp = rdp->mynode;
 	mask = rdp->grpmask;
@@ -2693,8 +2691,9 @@
 		raw_spin_unlock(&rnp->lock); /* irqs already disabled. */
 		rnp = rnp->parent;
 	} while (rnp != NULL && !(rnp->qsmaskinit & mask));
+	local_irq_restore(flags);
 
-	raw_spin_unlock_irqrestore(&rsp->onofflock, flags);
+	mutex_unlock(&rsp->onoff_mutex);
 }
 
 static void __cpuinit rcu_prepare_cpu(int cpu)
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 5faf05d..a240f03 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -394,11 +394,17 @@
 	struct rcu_head **orphan_donetail;	/* Tail of above. */
 	long qlen_lazy;				/* Number of lazy callbacks. */
 	long qlen;				/* Total number of callbacks. */
+	/* End of fields guarded by onofflock. */
+
+	struct mutex onoff_mutex;		/* Coordinate hotplug & GPs. */
+
 	struct mutex barrier_mutex;		/* Guards barrier fields. */
 	atomic_t barrier_cpu_count;		/* # CPUs waiting on. */
 	struct completion barrier_completion;	/* Wake at barrier end. */
 	unsigned long n_barrier_done;		/* ++ at start and end of */
 						/*  _rcu_barrier(). */
+	/* End of fields guarded by barrier_mutex. */
+
 	unsigned long jiffies_force_qs;		/* Time at which to invoke */
 						/*  force_quiescent_state(). */
 	unsigned long n_force_qs;		/* Number of calls to */
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index bd7c394..2d8927f 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -6122,6 +6122,17 @@
 	 * numbers.
 	 */
 
+	/*
+	 * Here, we should temporarily reset sched_domains_numa_levels to 0.
+	 * If it fails to allocate memory for array sched_domains_numa_masks[][],
+	 * the array will contain less then 'level' members. This could be
+	 * dangerous when we use it to iterate array sched_domains_numa_masks[][]
+	 * in other functions.
+	 *
+	 * We reset it to 'level' at the end of this function.
+	 */
+	sched_domains_numa_levels = 0;
+
 	sched_domains_numa_masks = kzalloc(sizeof(void *) * level, GFP_KERNEL);
 	if (!sched_domains_numa_masks)
 		return;
@@ -6176,11 +6187,68 @@
 	}
 
 	sched_domain_topology = tl;
+
+	sched_domains_numa_levels = level;
+}
+
+static void sched_domains_numa_masks_set(int cpu)
+{
+	int i, j;
+	int node = cpu_to_node(cpu);
+
+	for (i = 0; i < sched_domains_numa_levels; i++) {
+		for (j = 0; j < nr_node_ids; j++) {
+			if (node_distance(j, node) <= sched_domains_numa_distance[i])
+				cpumask_set_cpu(cpu, sched_domains_numa_masks[i][j]);
+		}
+	}
+}
+
+static void sched_domains_numa_masks_clear(int cpu)
+{
+	int i, j;
+	for (i = 0; i < sched_domains_numa_levels; i++) {
+		for (j = 0; j < nr_node_ids; j++)
+			cpumask_clear_cpu(cpu, sched_domains_numa_masks[i][j]);
+	}
+}
+
+/*
+ * Update sched_domains_numa_masks[level][node] array when new cpus
+ * are onlined.
+ */
+static int sched_domains_numa_masks_update(struct notifier_block *nfb,
+					   unsigned long action,
+					   void *hcpu)
+{
+	int cpu = (long)hcpu;
+
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_ONLINE:
+		sched_domains_numa_masks_set(cpu);
+		break;
+
+	case CPU_DEAD:
+		sched_domains_numa_masks_clear(cpu);
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	return NOTIFY_OK;
 }
 #else
 static inline void sched_init_numa(void)
 {
 }
+
+static int sched_domains_numa_masks_update(struct notifier_block *nfb,
+					   unsigned long action,
+					   void *hcpu)
+{
+	return 0;
+}
 #endif /* CONFIG_NUMA */
 
 static int __sdt_alloc(const struct cpumask *cpu_map)
@@ -6629,6 +6697,7 @@
 	mutex_unlock(&sched_domains_mutex);
 	put_online_cpus();
 
+	hotcpu_notifier(sched_domains_numa_masks_update, CPU_PRI_SCHED_ACTIVE);
 	hotcpu_notifier(cpuset_cpu_active, CPU_PRI_CPUSET_ACTIVE);
 	hotcpu_notifier(cpuset_cpu_inactive, CPU_PRI_CPUSET_INACTIVE);
 
diff --git a/kernel/time.c b/kernel/time.c
index ba744cf..d226c6a 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -30,7 +30,7 @@
 #include <linux/export.h>
 #include <linux/timex.h>
 #include <linux/capability.h>
-#include <linux/clocksource.h>
+#include <linux/timekeeper_internal.h>
 #include <linux/errno.h>
 #include <linux/syscalls.h>
 #include <linux/security.h>
diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index fd42bd4..8601f0d 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -16,6 +16,10 @@
 config GENERIC_TIME_VSYSCALL
 	bool
 
+# Timekeeping vsyscall support
+config GENERIC_TIME_VSYSCALL_OLD
+	bool
+
 # ktime_t scalar 64bit nsec representation
 config KTIME_SCALAR
 	bool
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index aa27d39..f11d83b 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -37,7 +37,6 @@
 static struct alarm_base {
 	spinlock_t		lock;
 	struct timerqueue_head	timerqueue;
-	struct hrtimer		timer;
 	ktime_t			(*gettime)(void);
 	clockid_t		base_clockid;
 } alarm_bases[ALARM_NUMTYPE];
@@ -46,6 +45,8 @@
 static ktime_t freezer_delta;
 static DEFINE_SPINLOCK(freezer_delta_lock);
 
+static struct wakeup_source *ws;
+
 #ifdef CONFIG_RTC_CLASS
 /* rtc timer and device for setting alarm wakeups at suspend */
 static struct rtc_timer		rtctimer;
@@ -130,50 +131,35 @@
  * @base: pointer to the base where the timer is being run
  * @alarm: pointer to alarm being enqueued.
  *
- * Adds alarm to a alarm_base timerqueue and if necessary sets
- * an hrtimer to run.
+ * Adds alarm to a alarm_base timerqueue
  *
  * Must hold base->lock when calling.
  */
 static void alarmtimer_enqueue(struct alarm_base *base, struct alarm *alarm)
 {
+	if (alarm->state & ALARMTIMER_STATE_ENQUEUED)
+		timerqueue_del(&base->timerqueue, &alarm->node);
+
 	timerqueue_add(&base->timerqueue, &alarm->node);
 	alarm->state |= ALARMTIMER_STATE_ENQUEUED;
-
-	if (&alarm->node == timerqueue_getnext(&base->timerqueue)) {
-		hrtimer_try_to_cancel(&base->timer);
-		hrtimer_start(&base->timer, alarm->node.expires,
-				HRTIMER_MODE_ABS);
-	}
 }
 
 /**
- * alarmtimer_remove - Removes an alarm timer from an alarm_base timerqueue
+ * alarmtimer_dequeue - Removes an alarm timer from an alarm_base timerqueue
  * @base: pointer to the base where the timer is running
  * @alarm: pointer to alarm being removed
  *
- * Removes alarm to a alarm_base timerqueue and if necessary sets
- * a new timer to run.
+ * Removes alarm to a alarm_base timerqueue
  *
  * Must hold base->lock when calling.
  */
-static void alarmtimer_remove(struct alarm_base *base, struct alarm *alarm)
+static void alarmtimer_dequeue(struct alarm_base *base, struct alarm *alarm)
 {
-	struct timerqueue_node *next = timerqueue_getnext(&base->timerqueue);
-
 	if (!(alarm->state & ALARMTIMER_STATE_ENQUEUED))
 		return;
 
 	timerqueue_del(&base->timerqueue, &alarm->node);
 	alarm->state &= ~ALARMTIMER_STATE_ENQUEUED;
-
-	if (next == &alarm->node) {
-		hrtimer_try_to_cancel(&base->timer);
-		next = timerqueue_getnext(&base->timerqueue);
-		if (!next)
-			return;
-		hrtimer_start(&base->timer, next->expires, HRTIMER_MODE_ABS);
-	}
 }
 
 
@@ -188,42 +174,23 @@
  */
 static enum hrtimer_restart alarmtimer_fired(struct hrtimer *timer)
 {
-	struct alarm_base *base = container_of(timer, struct alarm_base, timer);
-	struct timerqueue_node *next;
+	struct alarm *alarm = container_of(timer, struct alarm, timer);
+	struct alarm_base *base = &alarm_bases[alarm->type];
 	unsigned long flags;
-	ktime_t now;
 	int ret = HRTIMER_NORESTART;
 	int restart = ALARMTIMER_NORESTART;
 
 	spin_lock_irqsave(&base->lock, flags);
-	now = base->gettime();
-	while ((next = timerqueue_getnext(&base->timerqueue))) {
-		struct alarm *alarm;
-		ktime_t expired = next->expires;
+	alarmtimer_dequeue(base, alarm);
+	spin_unlock_irqrestore(&base->lock, flags);
 
-		if (expired.tv64 > now.tv64)
-			break;
+	if (alarm->function)
+		restart = alarm->function(alarm, base->gettime());
 
-		alarm = container_of(next, struct alarm, node);
-
-		timerqueue_del(&base->timerqueue, &alarm->node);
-		alarm->state &= ~ALARMTIMER_STATE_ENQUEUED;
-
-		alarm->state |= ALARMTIMER_STATE_CALLBACK;
-		spin_unlock_irqrestore(&base->lock, flags);
-		if (alarm->function)
-			restart = alarm->function(alarm, now);
-		spin_lock_irqsave(&base->lock, flags);
-		alarm->state &= ~ALARMTIMER_STATE_CALLBACK;
-
-		if (restart != ALARMTIMER_NORESTART) {
-			timerqueue_add(&base->timerqueue, &alarm->node);
-			alarm->state |= ALARMTIMER_STATE_ENQUEUED;
-		}
-	}
-
-	if (next) {
-		hrtimer_set_expires(&base->timer, next->expires);
+	spin_lock_irqsave(&base->lock, flags);
+	if (restart != ALARMTIMER_NORESTART) {
+		hrtimer_set_expires(&alarm->timer, alarm->node.expires);
+		alarmtimer_enqueue(base, alarm);
 		ret = HRTIMER_RESTART;
 	}
 	spin_unlock_irqrestore(&base->lock, flags);
@@ -250,6 +217,7 @@
 	unsigned long flags;
 	struct rtc_device *rtc;
 	int i;
+	int ret;
 
 	spin_lock_irqsave(&freezer_delta_lock, flags);
 	min = freezer_delta;
@@ -279,8 +247,10 @@
 	if (min.tv64 == 0)
 		return 0;
 
-	/* XXX - Should we enforce a minimum sleep time? */
-	WARN_ON(min.tv64 < NSEC_PER_SEC);
+	if (ktime_to_ns(min) < 2 * NSEC_PER_SEC) {
+		__pm_wakeup_event(ws, 2 * MSEC_PER_SEC);
+		return -EBUSY;
+	}
 
 	/* Setup an rtc timer to fire that far in the future */
 	rtc_timer_cancel(rtc, &rtctimer);
@@ -288,9 +258,11 @@
 	now = rtc_tm_to_ktime(tm);
 	now = ktime_add(now, min);
 
-	rtc_timer_start(rtc, &rtctimer, now, ktime_set(0, 0));
-
-	return 0;
+	/* Set alarm, if in the past reject suspend briefly to handle */
+	ret = rtc_timer_start(rtc, &rtctimer, now, ktime_set(0, 0));
+	if (ret < 0)
+		__pm_wakeup_event(ws, MSEC_PER_SEC);
+	return ret;
 }
 #else
 static int alarmtimer_suspend(struct device *dev)
@@ -324,6 +296,9 @@
 		enum alarmtimer_restart (*function)(struct alarm *, ktime_t))
 {
 	timerqueue_init(&alarm->node);
+	hrtimer_init(&alarm->timer, alarm_bases[type].base_clockid,
+			HRTIMER_MODE_ABS);
+	alarm->timer.function = alarmtimer_fired;
 	alarm->function = function;
 	alarm->type = type;
 	alarm->state = ALARMTIMER_STATE_INACTIVE;
@@ -334,17 +309,19 @@
  * @alarm: ptr to alarm to set
  * @start: time to run the alarm
  */
-void alarm_start(struct alarm *alarm, ktime_t start)
+int alarm_start(struct alarm *alarm, ktime_t start)
 {
 	struct alarm_base *base = &alarm_bases[alarm->type];
 	unsigned long flags;
+	int ret;
 
 	spin_lock_irqsave(&base->lock, flags);
-	if (alarmtimer_active(alarm))
-		alarmtimer_remove(base, alarm);
 	alarm->node.expires = start;
 	alarmtimer_enqueue(base, alarm);
+	ret = hrtimer_start(&alarm->timer, alarm->node.expires,
+				HRTIMER_MODE_ABS);
 	spin_unlock_irqrestore(&base->lock, flags);
+	return ret;
 }
 
 /**
@@ -358,18 +335,12 @@
 {
 	struct alarm_base *base = &alarm_bases[alarm->type];
 	unsigned long flags;
-	int ret = -1;
+	int ret;
+
 	spin_lock_irqsave(&base->lock, flags);
-
-	if (alarmtimer_callback_running(alarm))
-		goto out;
-
-	if (alarmtimer_is_queued(alarm)) {
-		alarmtimer_remove(base, alarm);
-		ret = 1;
-	} else
-		ret = 0;
-out:
+	ret = hrtimer_try_to_cancel(&alarm->timer);
+	if (ret >= 0)
+		alarmtimer_dequeue(base, alarm);
 	spin_unlock_irqrestore(&base->lock, flags);
 	return ret;
 }
@@ -802,10 +773,6 @@
 	for (i = 0; i < ALARM_NUMTYPE; i++) {
 		timerqueue_init_head(&alarm_bases[i].timerqueue);
 		spin_lock_init(&alarm_bases[i].lock);
-		hrtimer_init(&alarm_bases[i].timer,
-				alarm_bases[i].base_clockid,
-				HRTIMER_MODE_ABS);
-		alarm_bases[i].timer.function = alarmtimer_fired;
 	}
 
 	error = alarmtimer_rtc_interface_setup();
@@ -821,6 +788,7 @@
 		error = PTR_ERR(pdev);
 		goto out_drv;
 	}
+	ws = wakeup_source_register("alarmtimer");
 	return 0;
 
 out_drv:
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index 46da053..6629bf7 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -37,7 +37,7 @@
  * requested HZ value. It is also not recommended
  * for "tick-less" systems.
  */
-#define NSEC_PER_JIFFY	((u32)((((u64)NSEC_PER_SEC)<<8)/SHIFTED_HZ))
+#define NSEC_PER_JIFFY	((NSEC_PER_SEC+HZ/2)/HZ)
 
 /* Since jiffies uses a simple NSEC_PER_JIFFY multiplier
  * conversion, the .shift value could be zero. However
@@ -95,3 +95,33 @@
 {
 	return &clocksource_jiffies;
 }
+
+struct clocksource refined_jiffies;
+
+int register_refined_jiffies(long cycles_per_second)
+{
+	u64 nsec_per_tick, shift_hz;
+	long cycles_per_tick;
+
+
+
+	refined_jiffies = clocksource_jiffies;
+	refined_jiffies.name = "refined-jiffies";
+	refined_jiffies.rating++;
+
+	/* Calc cycles per tick */
+	cycles_per_tick = (cycles_per_second + HZ/2)/HZ;
+	/* shift_hz stores hz<<8 for extra accuracy */
+	shift_hz = (u64)cycles_per_second << 8;
+	shift_hz += cycles_per_tick/2;
+	do_div(shift_hz, cycles_per_tick);
+	/* Calculate nsec_per_tick using shift_hz */
+	nsec_per_tick = (u64)NSEC_PER_SEC << 8;
+	nsec_per_tick += (u32)shift_hz/2;
+	do_div(nsec_per_tick, (u32)shift_hz);
+
+	refined_jiffies.mult = ((u32)nsec_per_tick) << JIFFIES_SHIFT;
+
+	clocksource_register(&refined_jiffies);
+	return 0;
+}
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index f423bdd0..a402608 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -835,7 +835,7 @@
 		 */
 		if (ts->tick_stopped) {
 			touch_softlockup_watchdog();
-			if (idle_cpu(cpu))
+			if (is_idle_task(current))
 				ts->idle_jiffies++;
 		}
 		update_process_times(user_mode(regs));
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 5ce06a3..e424970 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -8,6 +8,7 @@
  *
  */
 
+#include <linux/timekeeper_internal.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
@@ -21,61 +22,6 @@
 #include <linux/tick.h>
 #include <linux/stop_machine.h>
 
-/* Structure holding internal timekeeping values. */
-struct timekeeper {
-	/* Current clocksource used for timekeeping. */
-	struct clocksource	*clock;
-	/* NTP adjusted clock multiplier */
-	u32			mult;
-	/* The shift value of the current clocksource. */
-	u32			shift;
-	/* Number of clock cycles in one NTP interval. */
-	cycle_t			cycle_interval;
-	/* Number of clock shifted nano seconds in one NTP interval. */
-	u64			xtime_interval;
-	/* shifted nano seconds left over when rounding cycle_interval */
-	s64			xtime_remainder;
-	/* Raw nano seconds accumulated per NTP interval. */
-	u32			raw_interval;
-
-	/* Current CLOCK_REALTIME time in seconds */
-	u64			xtime_sec;
-	/* Clock shifted nano seconds */
-	u64			xtime_nsec;
-
-	/* Difference between accumulated time and NTP time in ntp
-	 * shifted nano seconds. */
-	s64			ntp_error;
-	/* Shift conversion between clock shifted nano seconds and
-	 * ntp shifted nano seconds. */
-	u32			ntp_error_shift;
-
-	/*
-	 * wall_to_monotonic is what we need to add to xtime (or xtime corrected
-	 * for sub jiffie times) to get to monotonic time.  Monotonic is pegged
-	 * at zero at system boot time, so wall_to_monotonic will be negative,
-	 * however, we will ALWAYS keep the tv_nsec part positive so we can use
-	 * the usual normalization.
-	 *
-	 * wall_to_monotonic is moved after resume from suspend for the
-	 * monotonic time not to jump. We need to add total_sleep_time to
-	 * wall_to_monotonic to get the real boot based time offset.
-	 *
-	 * - wall_to_monotonic is no longer the boot time, getboottime must be
-	 * used instead.
-	 */
-	struct timespec		wall_to_monotonic;
-	/* Offset clock monotonic -> clock realtime */
-	ktime_t			offs_real;
-	/* time spent in suspend */
-	struct timespec		total_sleep_time;
-	/* Offset clock monotonic -> clock boottime */
-	ktime_t			offs_boot;
-	/* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */
-	struct timespec		raw_time;
-	/* Seqlock for all timekeeper values */
-	seqlock_t		lock;
-};
 
 static struct timekeeper timekeeper;
 
@@ -96,15 +42,6 @@
 	}
 }
 
-static struct timespec tk_xtime(struct timekeeper *tk)
-{
-	struct timespec ts;
-
-	ts.tv_sec = tk->xtime_sec;
-	ts.tv_nsec = (long)(tk->xtime_nsec >> tk->shift);
-	return ts;
-}
-
 static void tk_set_xtime(struct timekeeper *tk, const struct timespec *ts)
 {
 	tk->xtime_sec = ts->tv_sec;
@@ -246,14 +183,11 @@
 /* must hold write on timekeeper.lock */
 static void timekeeping_update(struct timekeeper *tk, bool clearntp)
 {
-	struct timespec xt;
-
 	if (clearntp) {
 		tk->ntp_error = 0;
 		ntp_clear();
 	}
-	xt = tk_xtime(tk);
-	update_vsyscall(&xt, &tk->wall_to_monotonic, tk->clock, tk->mult);
+	update_vsyscall(tk);
 }
 
 /**
@@ -1113,7 +1047,7 @@
 	accumulate_nsecs_to_secs(tk);
 
 	/* Accumulate raw time */
-	raw_nsecs = tk->raw_interval << shift;
+	raw_nsecs = (u64)tk->raw_interval << shift;
 	raw_nsecs += tk->raw_time.tv_nsec;
 	if (raw_nsecs >= NSEC_PER_SEC) {
 		u64 raw_secs = raw_nsecs;
@@ -1130,6 +1064,33 @@
 	return offset;
 }
 
+#ifdef CONFIG_GENERIC_TIME_VSYSCALL_OLD
+static inline void old_vsyscall_fixup(struct timekeeper *tk)
+{
+	s64 remainder;
+
+	/*
+	* Store only full nanoseconds into xtime_nsec after rounding
+	* it up and add the remainder to the error difference.
+	* XXX - This is necessary to avoid small 1ns inconsistnecies caused
+	* by truncating the remainder in vsyscalls. However, it causes
+	* additional work to be done in timekeeping_adjust(). Once
+	* the vsyscall implementations are converted to use xtime_nsec
+	* (shifted nanoseconds), and CONFIG_GENERIC_TIME_VSYSCALL_OLD
+	* users are removed, this can be killed.
+	*/
+	remainder = tk->xtime_nsec & ((1ULL << tk->shift) - 1);
+	tk->xtime_nsec -= remainder;
+	tk->xtime_nsec += 1ULL << tk->shift;
+	tk->ntp_error += remainder << tk->ntp_error_shift;
+
+}
+#else
+#define old_vsyscall_fixup(tk)
+#endif
+
+
+
 /**
  * update_wall_time - Uses the current clocksource to increment the wall time
  *
@@ -1141,7 +1102,6 @@
 	cycle_t offset;
 	int shift = 0, maxshift;
 	unsigned long flags;
-	s64 remainder;
 
 	write_seqlock_irqsave(&tk->lock, flags);
 
@@ -1183,20 +1143,11 @@
 	/* correct the clock when NTP error is too big */
 	timekeeping_adjust(tk, offset);
 
-
 	/*
-	* Store only full nanoseconds into xtime_nsec after rounding
-	* it up and add the remainder to the error difference.
-	* XXX - This is necessary to avoid small 1ns inconsistnecies caused
-	* by truncating the remainder in vsyscalls. However, it causes
-	* additional work to be done in timekeeping_adjust(). Once
-	* the vsyscall implementations are converted to use xtime_nsec
-	* (shifted nanoseconds), this can be killed.
-	*/
-	remainder = tk->xtime_nsec & ((1ULL << tk->shift) - 1);
-	tk->xtime_nsec -= remainder;
-	tk->xtime_nsec += 1ULL << tk->shift;
-	tk->ntp_error += remainder << tk->ntp_error_shift;
+	 * XXX This can be killed once everyone converts
+	 * to the new update_vsyscall.
+	 */
+	old_vsyscall_fixup(tk);
 
 	/*
 	 * Finally, make sure that after the rounding
diff --git a/kernel/timer.c b/kernel/timer.c
index d5de1b2..367d008 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -63,6 +63,7 @@
 #define TVR_SIZE (1 << TVR_BITS)
 #define TVN_MASK (TVN_SIZE - 1)
 #define TVR_MASK (TVR_SIZE - 1)
+#define MAX_TVAL ((unsigned long)((1ULL << (TVR_BITS + 4*TVN_BITS)) - 1))
 
 struct tvec {
 	struct list_head vec[TVN_SIZE];
@@ -359,11 +360,12 @@
 		vec = base->tv1.vec + (base->timer_jiffies & TVR_MASK);
 	} else {
 		int i;
-		/* If the timeout is larger than 0xffffffff on 64-bit
-		 * architectures then we use the maximum timeout:
+		/* If the timeout is larger than MAX_TVAL (on 64-bit
+		 * architectures or with CONFIG_BASE_SMALL=1) then we
+		 * use the maximum timeout.
 		 */
-		if (idx > 0xffffffffUL) {
-			idx = 0xffffffffUL;
+		if (idx > MAX_TVAL) {
+			idx = MAX_TVAL;
 			expires = idx + base->timer_jiffies;
 		}
 		i = (expires >> (TVR_BITS + 3 * TVN_BITS)) & TVN_MASK;
diff --git a/mm/slab_common.c b/mm/slab_common.c
index 9c21725..069a24e6 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -168,6 +168,7 @@
 		list_del(&s->list);
 
 		if (!__kmem_cache_shutdown(s)) {
+			mutex_unlock(&slab_mutex);
 			if (s->flags & SLAB_DESTROY_BY_RCU)
 				rcu_barrier();
 
@@ -175,12 +176,14 @@
 			kmem_cache_free(kmem_cache, s);
 		} else {
 			list_add(&s->list, &slab_caches);
+			mutex_unlock(&slab_mutex);
 			printk(KERN_ERR "kmem_cache_destroy %s: Slab cache still has objects\n",
 				s->name);
 			dump_stack();
 		}
+	} else {
+		mutex_unlock(&slab_mutex);
 	}
-	mutex_unlock(&slab_mutex);
 	put_online_cpus();
 }
 EXPORT_SYMBOL(kmem_cache_destroy);
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 14e254c..71cd288 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1483,7 +1483,7 @@
 	struct file *swap_file, *victim;
 	struct address_space *mapping;
 	struct inode *inode;
-	char *pathname;
+	struct filename *pathname;
 	int oom_score_adj;
 	int i, type, prev;
 	int err;
@@ -1498,8 +1498,7 @@
 	if (IS_ERR(pathname))
 		goto out;
 
-	victim = filp_open(pathname, O_RDWR|O_LARGEFILE, 0);
-	putname(pathname);
+	victim = file_open_name(pathname, O_RDWR|O_LARGEFILE, 0);
 	err = PTR_ERR(victim);
 	if (IS_ERR(victim))
 		goto out;
@@ -1936,7 +1935,7 @@
 SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
 {
 	struct swap_info_struct *p;
-	char *name;
+	struct filename *name;
 	struct file *swap_file = NULL;
 	struct address_space *mapping;
 	int i;
@@ -1967,7 +1966,7 @@
 		name = NULL;
 		goto bad_swap;
 	}
-	swap_file = filp_open(name, O_RDWR|O_LARGEFILE, 0);
+	swap_file = file_open_name(name, O_RDWR|O_LARGEFILE, 0);
 	if (IS_ERR(swap_file)) {
 		error = PTR_ERR(swap_file);
 		swap_file = NULL;
@@ -2053,7 +2052,7 @@
 
 	printk(KERN_INFO "Adding %uk swap on %s.  "
 			"Priority:%d extents:%d across:%lluk %s%s%s\n",
-		p->pages<<(PAGE_SHIFT-10), name, p->prio,
+		p->pages<<(PAGE_SHIFT-10), name->name, p->prio,
 		nr_extents, (unsigned long long)span<<(PAGE_SHIFT-10),
 		(p->flags & SWP_SOLIDSTATE) ? "SS" : "",
 		(p->flags & SWP_DISCARDABLE) ? "D" : "",
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 9d49ee6..ba033f0 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -591,7 +591,7 @@
 			   atomic_read(&sk->sk_refcnt),
 			   sk_rmem_alloc_get(sk),
 			   sk_wmem_alloc_get(sk),
-			   sock_i_uid(sk),
+			   from_kuid(seq_user_ns(seq), sock_i_uid(sk)),
 			   sock_i_ino(sk),
 			   &src_baswapped,
 			   &dst_baswapped,
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index 68e8f36..fe43bc7 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -265,6 +265,9 @@
 	struct net_device *dev = skb->dev;
 	u32 len;
 
+	if (!pskb_may_pull(skb, sizeof(struct iphdr)))
+		goto inhdr_error;
+
 	iph = ip_hdr(skb);
 	opt = &(IPCB(skb)->opt);
 
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 148e73d..d1dc14c 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -248,8 +248,8 @@
 	int removal_mark;	/* non-zero => the device is marked for
 				 * removal by worker thread */
 
-	int min_pkt_size;	/* = ETH_ZLEN; */
-	int max_pkt_size;	/* = ETH_ZLEN; */
+	int min_pkt_size;
+	int max_pkt_size;
 	int pkt_overhead;	/* overhead for MPLS, VLANs, IPSEC etc */
 	int nfrags;
 	struct page *page;
@@ -449,8 +449,6 @@
 static void pktgen_stop(struct pktgen_thread *t);
 static void pktgen_clear_counters(struct pktgen_dev *pkt_dev);
 
-static unsigned int scan_ip6(const char *s, char ip[16]);
-
 /* Module parameters, defaults. */
 static int pg_count_d __read_mostly = 1000;
 static int pg_delay_d __read_mostly;
@@ -702,8 +700,8 @@
 				&pkt_dev->cur_in6_saddr,
 				&pkt_dev->cur_in6_daddr);
 	} else
-		seq_printf(seq, "     cur_saddr: 0x%x  cur_daddr: 0x%x\n",
-			   pkt_dev->cur_saddr, pkt_dev->cur_daddr);
+		seq_printf(seq, "     cur_saddr: %pI4  cur_daddr: %pI4\n",
+			   &pkt_dev->cur_saddr, &pkt_dev->cur_daddr);
 
 	seq_printf(seq, "     cur_udp_dst: %d  cur_udp_src: %d\n",
 		   pkt_dev->cur_udp_dst, pkt_dev->cur_udp_src);
@@ -1299,7 +1297,7 @@
 			return -EFAULT;
 		buf[len] = 0;
 
-		scan_ip6(buf, pkt_dev->in6_daddr.s6_addr);
+		in6_pton(buf, -1, pkt_dev->in6_daddr.s6_addr, -1, NULL);
 		snprintf(buf, sizeof(buf), "%pI6c", &pkt_dev->in6_daddr);
 
 		pkt_dev->cur_in6_daddr = pkt_dev->in6_daddr;
@@ -1322,7 +1320,7 @@
 			return -EFAULT;
 		buf[len] = 0;
 
-		scan_ip6(buf, pkt_dev->min_in6_daddr.s6_addr);
+		in6_pton(buf, -1, pkt_dev->min_in6_daddr.s6_addr, -1, NULL);
 		snprintf(buf, sizeof(buf), "%pI6c", &pkt_dev->min_in6_daddr);
 
 		pkt_dev->cur_in6_daddr = pkt_dev->min_in6_daddr;
@@ -1344,7 +1342,7 @@
 			return -EFAULT;
 		buf[len] = 0;
 
-		scan_ip6(buf, pkt_dev->max_in6_daddr.s6_addr);
+		in6_pton(buf, -1, pkt_dev->max_in6_daddr.s6_addr, -1, NULL);
 		snprintf(buf, sizeof(buf), "%pI6c", &pkt_dev->max_in6_daddr);
 
 		if (debug)
@@ -1365,7 +1363,7 @@
 			return -EFAULT;
 		buf[len] = 0;
 
-		scan_ip6(buf, pkt_dev->in6_saddr.s6_addr);
+		in6_pton(buf, -1, pkt_dev->in6_saddr.s6_addr, -1, NULL);
 		snprintf(buf, sizeof(buf), "%pI6c", &pkt_dev->in6_saddr);
 
 		pkt_dev->cur_in6_saddr = pkt_dev->in6_saddr;
@@ -2036,19 +2034,17 @@
 	/* Set up Dest MAC */
 	memcpy(&(pkt_dev->hh[0]), pkt_dev->dst_mac, ETH_ALEN);
 
-	/* Set up pkt size */
-	pkt_dev->cur_pkt_size = pkt_dev->min_pkt_size;
-
 	if (pkt_dev->flags & F_IPV6) {
-		/*
-		 * Skip this automatic address setting until locks or functions
-		 * gets exported
-		 */
-
-#ifdef NOTNOW
 		int i, set = 0, err = 1;
 		struct inet6_dev *idev;
 
+		if (pkt_dev->min_pkt_size == 0) {
+			pkt_dev->min_pkt_size = 14 + sizeof(struct ipv6hdr)
+						+ sizeof(struct udphdr)
+						+ sizeof(struct pktgen_hdr)
+						+ pkt_dev->pkt_overhead;
+		}
+
 		for (i = 0; i < IN6_ADDR_HSIZE; i++)
 			if (pkt_dev->cur_in6_saddr.s6_addr[i]) {
 				set = 1;
@@ -2069,9 +2065,8 @@
 				struct inet6_ifaddr *ifp;
 
 				read_lock_bh(&idev->lock);
-				for (ifp = idev->addr_list; ifp;
-				     ifp = ifp->if_next) {
-					if (ifp->scope == IFA_LINK &&
+				list_for_each_entry(ifp, &idev->addr_list, if_list) {
+					if ((ifp->scope & IFA_LINK) &&
 					    !(ifp->flags & IFA_F_TENTATIVE)) {
 						pkt_dev->cur_in6_saddr = ifp->addr;
 						err = 0;
@@ -2084,8 +2079,14 @@
 			if (err)
 				pr_err("ERROR: IPv6 link address not available\n");
 		}
-#endif
 	} else {
+		if (pkt_dev->min_pkt_size == 0) {
+			pkt_dev->min_pkt_size = 14 + sizeof(struct iphdr)
+						+ sizeof(struct udphdr)
+						+ sizeof(struct pktgen_hdr)
+						+ pkt_dev->pkt_overhead;
+		}
+
 		pkt_dev->saddr_min = 0;
 		pkt_dev->saddr_max = 0;
 		if (strlen(pkt_dev->src_min) == 0) {
@@ -2111,6 +2112,10 @@
 		pkt_dev->daddr_max = in_aton(pkt_dev->dst_max);
 	}
 	/* Initialize current values. */
+	pkt_dev->cur_pkt_size = pkt_dev->min_pkt_size;
+	if (pkt_dev->min_pkt_size > pkt_dev->max_pkt_size)
+		pkt_dev->max_pkt_size = pkt_dev->min_pkt_size;
+
 	pkt_dev->cur_dst_mac_offset = 0;
 	pkt_dev->cur_src_mac_offset = 0;
 	pkt_dev->cur_saddr = pkt_dev->saddr_min;
@@ -2758,97 +2763,6 @@
 	return skb;
 }
 
-/*
- * scan_ip6, fmt_ip taken from dietlibc-0.21
- * Author Felix von Leitner <felix-dietlibc@fefe.de>
- *
- * Slightly modified for kernel.
- * Should be candidate for net/ipv4/utils.c
- * --ro
- */
-
-static unsigned int scan_ip6(const char *s, char ip[16])
-{
-	unsigned int i;
-	unsigned int len = 0;
-	unsigned long u;
-	char suffix[16];
-	unsigned int prefixlen = 0;
-	unsigned int suffixlen = 0;
-	__be32 tmp;
-	char *pos;
-
-	for (i = 0; i < 16; i++)
-		ip[i] = 0;
-
-	for (;;) {
-		if (*s == ':') {
-			len++;
-			if (s[1] == ':') {	/* Found "::", skip to part 2 */
-				s += 2;
-				len++;
-				break;
-			}
-			s++;
-		}
-
-		u = simple_strtoul(s, &pos, 16);
-		i = pos - s;
-		if (!i)
-			return 0;
-		if (prefixlen == 12 && s[i] == '.') {
-
-			/* the last 4 bytes may be written as IPv4 address */
-
-			tmp = in_aton(s);
-			memcpy((struct in_addr *)(ip + 12), &tmp, sizeof(tmp));
-			return i + len;
-		}
-		ip[prefixlen++] = (u >> 8);
-		ip[prefixlen++] = (u & 255);
-		s += i;
-		len += i;
-		if (prefixlen == 16)
-			return len;
-	}
-
-/* part 2, after "::" */
-	for (;;) {
-		if (*s == ':') {
-			if (suffixlen == 0)
-				break;
-			s++;
-			len++;
-		} else if (suffixlen != 0)
-			break;
-
-		u = simple_strtol(s, &pos, 16);
-		i = pos - s;
-		if (!i) {
-			if (*s)
-				len--;
-			break;
-		}
-		if (suffixlen + prefixlen <= 12 && s[i] == '.') {
-			tmp = in_aton(s);
-			memcpy((struct in_addr *)(suffix + suffixlen), &tmp,
-			       sizeof(tmp));
-			suffixlen += 4;
-			len += strlen(s);
-			break;
-		}
-		suffix[suffixlen++] = (u >> 8);
-		suffix[suffixlen++] = (u & 255);
-		s += i;
-		len += i;
-		if (prefixlen + suffixlen == 16)
-			break;
-	}
-	for (i = 0; i < suffixlen; i++)
-		ip[16 - suffixlen + i] = suffix[i];
-	return len;
-}
-
 static struct sk_buff *fill_packet_ipv6(struct net_device *odev,
 					struct pktgen_dev *pkt_dev)
 {
@@ -2927,7 +2841,7 @@
 		  sizeof(struct ipv6hdr) - sizeof(struct udphdr) -
 		  pkt_dev->pkt_overhead;
 
-	if (datalen < sizeof(struct pktgen_hdr)) {
+	if (datalen < 0 || datalen < sizeof(struct pktgen_hdr)) {
 		datalen = sizeof(struct pktgen_hdr);
 		net_info_ratelimited("increased datalen to %d\n", datalen);
 	}
@@ -3548,8 +3462,6 @@
 	}
 
 	pkt_dev->removal_mark = 0;
-	pkt_dev->min_pkt_size = ETH_ZLEN;
-	pkt_dev->max_pkt_size = ETH_ZLEN;
 	pkt_dev->nfrags = 0;
 	pkt_dev->delay = pg_delay_d;
 	pkt_dev->count = pg_count_d;
diff --git a/net/core/utils.c b/net/core/utils.c
index f5613d5..e3487e46 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -107,6 +107,18 @@
 	return IN6PTON_UNKNOWN;
 }
 
+/**
+ * in4_pton - convert an IPv4 address from literal to binary representation
+ * @src: the start of the IPv4 address string
+ * @srclen: the length of the string, -1 means strlen(src)
+ * @dst: the binary (u8[4] array) representation of the IPv4 address
+ * @delim: the delimiter of the IPv4 address in @src, -1 means no delimiter
+ * @end: A pointer to the end of the parsed string will be placed here
+ *
+ * Return one on success, return zero when any error occurs
+ * and @end will point to the end of the parsed string.
+ *
+ */
 int in4_pton(const char *src, int srclen,
 	     u8 *dst,
 	     int delim, const char **end)
@@ -161,6 +173,18 @@
 }
 EXPORT_SYMBOL(in4_pton);
 
+/**
+ * in6_pton - convert an IPv6 address from literal to binary representation
+ * @src: the start of the IPv6 address string
+ * @srclen: the length of the string, -1 means strlen(src)
+ * @dst: the binary (u8[16] array) representation of the IPv6 address
+ * @delim: the delimiter of the IPv6 address in @src, -1 means no delimiter
+ * @end: A pointer to the end of the parsed string will be placed here
+ *
+ * Return one on success, return zero when any error occurs
+ * and @end will point to the end of the parsed string.
+ *
+ */
 int in6_pton(const char *src, int srclen,
 	     u8 *dst,
 	     int delim, const char **end)
diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index 978bca4..1831092 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -374,7 +374,7 @@
 
 	memset(&fl4, 0, sizeof(fl4));
 	flowi4_init_output(&fl4, tunnel->parms.link,
-			   htonl(tunnel->parms.i_key), RT_TOS(tos),
+			   be32_to_cpu(tunnel->parms.i_key), RT_TOS(tos),
 			   RT_SCOPE_UNIVERSE,
 			   IPPROTO_IPIP, 0,
 			   dst, tiph->saddr, 0, 0);
@@ -441,7 +441,7 @@
 		struct flowi4 fl4;
 		memset(&fl4, 0, sizeof(fl4));
 		flowi4_init_output(&fl4, tunnel->parms.link,
-				   htonl(tunnel->parms.i_key),
+				   be32_to_cpu(tunnel->parms.i_key),
 				   RT_TOS(iph->tos), RT_SCOPE_UNIVERSE,
 				   IPPROTO_IPIP, 0,
 				   iph->daddr, iph->saddr, 0, 0);
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 1a0da8d..432f4bb 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2220,7 +2220,7 @@
 		goto nla_put_failure;
 
 	if (fl4->flowi4_mark &&
-	    nla_put_be32(skb, RTA_MARK, fl4->flowi4_mark))
+	    nla_put_u32(skb, RTA_MARK, fl4->flowi4_mark))
 		goto nla_put_failure;
 
 	error = rt->dst.error;
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index 9205e49..63d4ecc 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -248,6 +248,8 @@
 	ctxt = rcu_dereference(tcp_fastopen_ctx);
 	if (ctxt)
 		memcpy(user_key, ctxt->key, TCP_FASTOPEN_KEY_LENGTH);
+	else
+		memset(user_key, 0, sizeof(user_key));
 	rcu_read_unlock();
 
 	snprintf(tbl.data, tbl.maxlen, "%08x-%08x-%08x-%08x",
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 75735c9..ef998b0 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -708,10 +708,11 @@
 	arg.csumoffset = offsetof(struct tcphdr, check) / 2;
 	arg.flags = (sk && inet_sk(sk)->transparent) ? IP_REPLY_ARG_NOSRCCHECK : 0;
 	/* When socket is gone, all binding information is lost.
-	 * routing might fail in this case. using iif for oif to
-	 * make sure we can deliver it
+	 * routing might fail in this case. No choice here, if we choose to force
+	 * input interface, we will misroute in case of asymmetric route.
 	 */
-	arg.bound_dev_if = sk ? sk->sk_bound_dev_if : inet_iif(skb);
+	if (sk)
+		arg.bound_dev_if = sk->sk_bound_dev_if;
 
 	net = dev_net(skb_dst(skb)->dev);
 	arg.tos = ip_hdr(skb)->tos;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 49c8903..26175bf 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -877,7 +877,8 @@
 	__tcp_v6_send_check(buff, &fl6.saddr, &fl6.daddr);
 
 	fl6.flowi6_proto = IPPROTO_TCP;
-	fl6.flowi6_oif = inet6_iif(skb);
+	if (ipv6_addr_type(&fl6.daddr) & IPV6_ADDR_LINKLOCAL)
+		fl6.flowi6_oif = inet6_iif(skb);
 	fl6.fl6_dport = t1->dest;
 	fl6.fl6_sport = t1->source;
 	security_skb_classify_flow(skb, flowi6_to_flowi(&fl6));
diff --git a/net/mac80211/mesh_sync.c b/net/mac80211/mesh_sync.c
index accfa00..a16b7b4 100644
--- a/net/mac80211/mesh_sync.c
+++ b/net/mac80211/mesh_sync.c
@@ -56,7 +56,6 @@
 	u64 tsfdelta;
 
 	spin_lock_bh(&ifmsh->sync_offset_lock);
-
 	if (ifmsh->sync_offset_clockdrift_max < beacon_int_fraction) {
 		msync_dbg(sdata, "TBTT : max clockdrift=%lld; adjusting\n",
 			  (long long) ifmsh->sync_offset_clockdrift_max);
@@ -69,11 +68,11 @@
 		tsfdelta = -beacon_int_fraction;
 		ifmsh->sync_offset_clockdrift_max -= beacon_int_fraction;
 	}
+	spin_unlock_bh(&ifmsh->sync_offset_lock);
 
 	tsf = drv_get_tsf(local, sdata);
 	if (tsf != -1ULL)
 		drv_set_tsf(local, sdata, tsf + tsfdelta);
-	spin_unlock_bh(&ifmsh->sync_offset_lock);
 }
 
 static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 2ce8973..3af0cc4 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -34,7 +34,7 @@
 		skb_queue_len(&local->skb_queue_unreliable);
 	while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
 	       (skb = skb_dequeue(&local->skb_queue_unreliable))) {
-		dev_kfree_skb_irq(skb);
+		ieee80211_free_txskb(hw, skb);
 		tmp--;
 		I802_DEBUG_INC(local->tx_status_drop);
 	}
@@ -159,7 +159,7 @@
 			   "dropped TX filtered frame, queue_len=%d PS=%d @%lu\n",
 			   skb_queue_len(&sta->tx_filtered[ac]),
 			   !!test_sta_flag(sta, WLAN_STA_PS_STA), jiffies);
-	dev_kfree_skb(skb);
+	ieee80211_free_txskb(&local->hw, skb);
 }
 
 static void ieee80211_check_pending_bar(struct sta_info *sta, u8 *addr, u8 tid)
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index e0e0d1d..c9bf83f 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -354,7 +354,7 @@
 			total += skb_queue_len(&sta->ps_tx_buf[ac]);
 			if (skb) {
 				purged++;
-				dev_kfree_skb(skb);
+				ieee80211_free_txskb(&local->hw, skb);
 				break;
 			}
 		}
@@ -466,7 +466,7 @@
 			ps_dbg(tx->sdata,
 			       "STA %pM TX buffer for AC %d full - dropping oldest frame\n",
 			       sta->sta.addr, ac);
-			dev_kfree_skb(old);
+			ieee80211_free_txskb(&local->hw, old);
 		} else
 			tx->local->total_ps_buffered++;
 
@@ -1103,7 +1103,7 @@
 		spin_unlock(&tx->sta->lock);
 
 		if (purge_skb)
-			dev_kfree_skb(purge_skb);
+			ieee80211_free_txskb(&tx->local->hw, purge_skb);
 	}
 
 	/* reset session timer */
@@ -1214,7 +1214,7 @@
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 		if (WARN_ON_ONCE(q >= local->hw.queues)) {
 			__skb_unlink(skb, skbs);
-			dev_kfree_skb(skb);
+			ieee80211_free_txskb(&local->hw, skb);
 			continue;
 		}
 #endif
@@ -1356,7 +1356,7 @@
 	if (unlikely(res == TX_DROP)) {
 		I802_DEBUG_INC(tx->local->tx_handlers_drop);
 		if (tx->skb)
-			dev_kfree_skb(tx->skb);
+			ieee80211_free_txskb(&tx->local->hw, tx->skb);
 		else
 			__skb_queue_purge(&tx->skbs);
 		return -1;
@@ -1393,7 +1393,7 @@
 	res_prepare = ieee80211_tx_prepare(sdata, &tx, skb);
 
 	if (unlikely(res_prepare == TX_DROP)) {
-		dev_kfree_skb(skb);
+		ieee80211_free_txskb(&local->hw, skb);
 		goto out;
 	} else if (unlikely(res_prepare == TX_QUEUED)) {
 		goto out;
@@ -1465,7 +1465,7 @@
 	headroom = max_t(int, 0, headroom);
 
 	if (ieee80211_skb_resize(sdata, skb, headroom, may_encrypt)) {
-		dev_kfree_skb(skb);
+		ieee80211_free_txskb(&local->hw, skb);
 		rcu_read_unlock();
 		return;
 	}
@@ -2050,8 +2050,10 @@
 		head_need += IEEE80211_ENCRYPT_HEADROOM;
 		head_need += local->tx_headroom;
 		head_need = max_t(int, 0, head_need);
-		if (ieee80211_skb_resize(sdata, skb, head_need, true))
-			goto fail;
+		if (ieee80211_skb_resize(sdata, skb, head_need, true)) {
+			ieee80211_free_txskb(&local->hw, skb);
+			return NETDEV_TX_OK;
+		}
 	}
 
 	if (encaps_data) {
@@ -2184,7 +2186,7 @@
 			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 			if (WARN_ON(!info->control.vif)) {
-				kfree_skb(skb);
+				ieee80211_free_txskb(&local->hw, skb);
 				continue;
 			}
 
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index bac973a..194d865 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -208,6 +208,35 @@
 	return xcl->xcl_ops->xpo_create(serv, net, sap, len, flags);
 }
 
+/*
+ * svc_xprt_received conditionally queues the transport for processing
+ * by another thread. The caller must hold the XPT_BUSY bit and must
+ * not thereafter touch transport data.
+ *
+ * Note: XPT_DATA only gets cleared when a read-attempt finds no (or
+ * insufficient) data.
+ */
+static void svc_xprt_received(struct svc_xprt *xprt)
+{
+	BUG_ON(!test_bit(XPT_BUSY, &xprt->xpt_flags));
+	/* As soon as we clear busy, the xprt could be closed and
+	 * 'put', so we need a reference to call svc_xprt_enqueue with:
+	 */
+	svc_xprt_get(xprt);
+	clear_bit(XPT_BUSY, &xprt->xpt_flags);
+	svc_xprt_enqueue(xprt);
+	svc_xprt_put(xprt);
+}
+
+void svc_add_new_perm_xprt(struct svc_serv *serv, struct svc_xprt *new)
+{
+	clear_bit(XPT_TEMP, &new->xpt_flags);
+	spin_lock_bh(&serv->sv_lock);
+	list_add(&new->xpt_list, &serv->sv_permsocks);
+	spin_unlock_bh(&serv->sv_lock);
+	svc_xprt_received(new);
+}
+
 int svc_create_xprt(struct svc_serv *serv, const char *xprt_name,
 		    struct net *net, const int family,
 		    const unsigned short port, int flags)
@@ -232,13 +261,8 @@
 			module_put(xcl->xcl_owner);
 			return PTR_ERR(newxprt);
 		}
-
-		clear_bit(XPT_TEMP, &newxprt->xpt_flags);
-		spin_lock_bh(&serv->sv_lock);
-		list_add(&newxprt->xpt_list, &serv->sv_permsocks);
-		spin_unlock_bh(&serv->sv_lock);
+		svc_add_new_perm_xprt(serv, newxprt);
 		newport = svc_xprt_local_port(newxprt);
-		clear_bit(XPT_BUSY, &newxprt->xpt_flags);
 		return newport;
 	}
  err:
@@ -394,27 +418,6 @@
 	return xprt;
 }
 
-/*
- * svc_xprt_received conditionally queues the transport for processing
- * by another thread. The caller must hold the XPT_BUSY bit and must
- * not thereafter touch transport data.
- *
- * Note: XPT_DATA only gets cleared when a read-attempt finds no (or
- * insufficient) data.
- */
-void svc_xprt_received(struct svc_xprt *xprt)
-{
-	BUG_ON(!test_bit(XPT_BUSY, &xprt->xpt_flags));
-	/* As soon as we clear busy, the xprt could be closed and
-	 * 'put', so we need a reference to call svc_xprt_enqueue with:
-	 */
-	svc_xprt_get(xprt);
-	clear_bit(XPT_BUSY, &xprt->xpt_flags);
-	svc_xprt_enqueue(xprt);
-	svc_xprt_put(xprt);
-}
-EXPORT_SYMBOL_GPL(svc_xprt_received);
-
 /**
  * svc_reserve - change the space reserved for the reply to a request.
  * @rqstp:  The request in question
@@ -565,33 +568,12 @@
 	}
 }
 
-/*
- * Receive the next request on any transport.  This code is carefully
- * organised not to touch any cachelines in the shared svc_serv
- * structure, only cachelines in the local svc_pool.
- */
-int svc_recv(struct svc_rqst *rqstp, long timeout)
+int svc_alloc_arg(struct svc_rqst *rqstp)
 {
-	struct svc_xprt		*xprt = NULL;
-	struct svc_serv		*serv = rqstp->rq_server;
-	struct svc_pool		*pool = rqstp->rq_pool;
-	int			len, i;
-	int			pages;
-	struct xdr_buf		*arg;
-	DECLARE_WAITQUEUE(wait, current);
-	long			time_left;
-
-	dprintk("svc: server %p waiting for data (to = %ld)\n",
-		rqstp, timeout);
-
-	if (rqstp->rq_xprt)
-		printk(KERN_ERR
-			"svc_recv: service %p, transport not NULL!\n",
-			 rqstp);
-	if (waitqueue_active(&rqstp->rq_wait))
-		printk(KERN_ERR
-			"svc_recv: service %p, wait queue active!\n",
-			 rqstp);
+	struct svc_serv *serv = rqstp->rq_server;
+	struct xdr_buf *arg;
+	int pages;
+	int i;
 
 	/* now allocate needed pages.  If we get a failure, sleep briefly */
 	pages = (serv->sv_max_mesg + PAGE_SIZE) / PAGE_SIZE;
@@ -621,11 +603,15 @@
 	arg->page_len = (pages-2)*PAGE_SIZE;
 	arg->len = (pages-1)*PAGE_SIZE;
 	arg->tail[0].iov_len = 0;
+	return 0;
+}
 
-	try_to_freeze();
-	cond_resched();
-	if (signalled() || kthread_should_stop())
-		return -EINTR;
+struct svc_xprt *svc_get_next_xprt(struct svc_rqst *rqstp, long timeout)
+{
+	struct svc_xprt *xprt;
+	struct svc_pool		*pool = rqstp->rq_pool;
+	DECLARE_WAITQUEUE(wait, current);
+	long			time_left;
 
 	/* Normally we will wait up to 5 seconds for any required
 	 * cache information to be provided.
@@ -663,7 +649,7 @@
 		if (kthread_should_stop()) {
 			set_current_state(TASK_RUNNING);
 			spin_unlock_bh(&pool->sp_lock);
-			return -EINTR;
+			return ERR_PTR(-EINTR);
 		}
 
 		add_wait_queue(&rqstp->rq_wait, &wait);
@@ -684,48 +670,58 @@
 			spin_unlock_bh(&pool->sp_lock);
 			dprintk("svc: server %p, no data yet\n", rqstp);
 			if (signalled() || kthread_should_stop())
-				return -EINTR;
+				return ERR_PTR(-EINTR);
 			else
-				return -EAGAIN;
+				return ERR_PTR(-EAGAIN);
 		}
 	}
 	spin_unlock_bh(&pool->sp_lock);
+	return xprt;
+}
 
-	len = 0;
+void svc_add_new_temp_xprt(struct svc_serv *serv, struct svc_xprt *newxpt)
+{
+	spin_lock_bh(&serv->sv_lock);
+	set_bit(XPT_TEMP, &newxpt->xpt_flags);
+	list_add(&newxpt->xpt_list, &serv->sv_tempsocks);
+	serv->sv_tmpcnt++;
+	if (serv->sv_temptimer.function == NULL) {
+		/* setup timer to age temp transports */
+		setup_timer(&serv->sv_temptimer, svc_age_temp_xprts,
+			    (unsigned long)serv);
+		mod_timer(&serv->sv_temptimer,
+			  jiffies + svc_conn_age_period * HZ);
+	}
+	spin_unlock_bh(&serv->sv_lock);
+	svc_xprt_received(newxpt);
+}
+
+static int svc_handle_xprt(struct svc_rqst *rqstp, struct svc_xprt *xprt)
+{
+	struct svc_serv *serv = rqstp->rq_server;
+	int len = 0;
+
 	if (test_bit(XPT_CLOSE, &xprt->xpt_flags)) {
 		dprintk("svc_recv: found XPT_CLOSE\n");
 		svc_delete_xprt(xprt);
 		/* Leave XPT_BUSY set on the dead xprt: */
-		goto out;
+		return 0;
 	}
 	if (test_bit(XPT_LISTENER, &xprt->xpt_flags)) {
 		struct svc_xprt *newxpt;
+		/*
+		 * We know this module_get will succeed because the
+		 * listener holds a reference too
+		 */
+		__module_get(xprt->xpt_class->xcl_owner);
+		svc_check_conn_limits(xprt->xpt_server);
 		newxpt = xprt->xpt_ops->xpo_accept(xprt);
-		if (newxpt) {
-			/*
-			 * We know this module_get will succeed because the
-			 * listener holds a reference too
-			 */
-			__module_get(newxpt->xpt_class->xcl_owner);
-			svc_check_conn_limits(xprt->xpt_server);
-			spin_lock_bh(&serv->sv_lock);
-			set_bit(XPT_TEMP, &newxpt->xpt_flags);
-			list_add(&newxpt->xpt_list, &serv->sv_tempsocks);
-			serv->sv_tmpcnt++;
-			if (serv->sv_temptimer.function == NULL) {
-				/* setup timer to age temp transports */
-				setup_timer(&serv->sv_temptimer,
-					    svc_age_temp_xprts,
-					    (unsigned long)serv);
-				mod_timer(&serv->sv_temptimer,
-					  jiffies + svc_conn_age_period * HZ);
-			}
-			spin_unlock_bh(&serv->sv_lock);
-			svc_xprt_received(newxpt);
-		}
+		if (newxpt)
+			svc_add_new_temp_xprt(serv, newxpt);
 	} else if (xprt->xpt_ops->xpo_has_wspace(xprt)) {
+		/* XPT_DATA|XPT_DEFERRED case: */
 		dprintk("svc: server %p, pool %u, transport %p, inuse=%d\n",
-			rqstp, pool->sp_id, xprt,
+			rqstp, rqstp->rq_pool->sp_id, xprt,
 			atomic_read(&xprt->xpt_ref.refcount));
 		rqstp->rq_deferred = svc_deferred_dequeue(xprt);
 		if (rqstp->rq_deferred)
@@ -736,10 +732,51 @@
 		rqstp->rq_reserved = serv->sv_max_mesg;
 		atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved);
 	}
+	/* clear XPT_BUSY: */
 	svc_xprt_received(xprt);
+	return len;
+}
+
+/*
+ * Receive the next request on any transport.  This code is carefully
+ * organised not to touch any cachelines in the shared svc_serv
+ * structure, only cachelines in the local svc_pool.
+ */
+int svc_recv(struct svc_rqst *rqstp, long timeout)
+{
+	struct svc_xprt		*xprt = NULL;
+	struct svc_serv		*serv = rqstp->rq_server;
+	int			len, err;
+
+	dprintk("svc: server %p waiting for data (to = %ld)\n",
+		rqstp, timeout);
+
+	if (rqstp->rq_xprt)
+		printk(KERN_ERR
+			"svc_recv: service %p, transport not NULL!\n",
+			 rqstp);
+	if (waitqueue_active(&rqstp->rq_wait))
+		printk(KERN_ERR
+			"svc_recv: service %p, wait queue active!\n",
+			 rqstp);
+
+	err = svc_alloc_arg(rqstp);
+	if (err)
+		return err;
+
+	try_to_freeze();
+	cond_resched();
+	if (signalled() || kthread_should_stop())
+		return -EINTR;
+
+	xprt = svc_get_next_xprt(rqstp, timeout);
+	if (IS_ERR(xprt))
+		return PTR_ERR(xprt);
+
+	len = svc_handle_xprt(rqstp, xprt);
 
 	/* No data, incomplete (TCP) read, or accept() */
-	if (len == 0 || len == -EAGAIN)
+	if (len <= 0)
 		goto out;
 
 	clear_bit(XPT_OLD, &xprt->xpt_flags);
@@ -917,16 +954,18 @@
 }
 EXPORT_SYMBOL_GPL(svc_close_xprt);
 
-static void svc_close_list(struct list_head *xprt_list, struct net *net)
+static void svc_close_list(struct svc_serv *serv, struct list_head *xprt_list, struct net *net)
 {
 	struct svc_xprt *xprt;
 
+	spin_lock(&serv->sv_lock);
 	list_for_each_entry(xprt, xprt_list, xpt_list) {
 		if (xprt->xpt_net != net)
 			continue;
 		set_bit(XPT_CLOSE, &xprt->xpt_flags);
 		set_bit(XPT_BUSY, &xprt->xpt_flags);
 	}
+	spin_unlock(&serv->sv_lock);
 }
 
 static void svc_clear_pools(struct svc_serv *serv, struct net *net)
@@ -949,24 +988,28 @@
 	}
 }
 
-static void svc_clear_list(struct list_head *xprt_list, struct net *net)
+static void svc_clear_list(struct svc_serv *serv, struct list_head *xprt_list, struct net *net)
 {
 	struct svc_xprt *xprt;
 	struct svc_xprt *tmp;
+	LIST_HEAD(victims);
 
+	spin_lock(&serv->sv_lock);
 	list_for_each_entry_safe(xprt, tmp, xprt_list, xpt_list) {
 		if (xprt->xpt_net != net)
 			continue;
-		svc_delete_xprt(xprt);
+		list_move(&xprt->xpt_list, &victims);
 	}
-	list_for_each_entry(xprt, xprt_list, xpt_list)
-		BUG_ON(xprt->xpt_net == net);
+	spin_unlock(&serv->sv_lock);
+
+	list_for_each_entry_safe(xprt, tmp, &victims, xpt_list)
+		svc_delete_xprt(xprt);
 }
 
 void svc_close_net(struct svc_serv *serv, struct net *net)
 {
-	svc_close_list(&serv->sv_tempsocks, net);
-	svc_close_list(&serv->sv_permsocks, net);
+	svc_close_list(serv, &serv->sv_tempsocks, net);
+	svc_close_list(serv, &serv->sv_permsocks, net);
 
 	svc_clear_pools(serv, net);
 	/*
@@ -974,8 +1017,8 @@
 	 * svc_xprt_enqueue will not add new entries without taking the
 	 * sp_lock and checking XPT_BUSY.
 	 */
-	svc_clear_list(&serv->sv_tempsocks, net);
-	svc_clear_list(&serv->sv_permsocks, net);
+	svc_clear_list(serv, &serv->sv_tempsocks, net);
+	svc_clear_list(serv, &serv->sv_permsocks, net);
 }
 
 /*
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 998aa8c..03827ce 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -59,7 +59,7 @@
 
 
 static struct svc_sock *svc_setup_socket(struct svc_serv *, struct socket *,
-					 int *errp, int flags);
+					 int flags);
 static void		svc_udp_data_ready(struct sock *, int);
 static int		svc_udp_recvfrom(struct svc_rqst *);
 static int		svc_udp_sendto(struct svc_rqst *);
@@ -305,57 +305,6 @@
 	return len;
 }
 
-/**
- * svc_sock_names - construct a list of listener names in a string
- * @serv: pointer to RPC service
- * @buf: pointer to a buffer to fill in with socket names
- * @buflen: size of the buffer to be filled
- * @toclose: pointer to '\0'-terminated C string containing the name
- *		of a listener to be closed
- *
- * Fills in @buf with a '\n'-separated list of names of listener
- * sockets.  If @toclose is not NULL, the socket named by @toclose
- * is closed, and is not included in the output list.
- *
- * Returns positive length of the socket name string, or a negative
- * errno value on error.
- */
-int svc_sock_names(struct svc_serv *serv, char *buf, const size_t buflen,
-		   const char *toclose)
-{
-	struct svc_sock *svsk, *closesk = NULL;
-	int len = 0;
-
-	if (!serv)
-		return 0;
-
-	spin_lock_bh(&serv->sv_lock);
-	list_for_each_entry(svsk, &serv->sv_permsocks, sk_xprt.xpt_list) {
-		int onelen = svc_one_sock_name(svsk, buf + len, buflen - len);
-		if (onelen < 0) {
-			len = onelen;
-			break;
-		}
-		if (toclose && strcmp(toclose, buf + len) == 0) {
-			closesk = svsk;
-			svc_xprt_get(&closesk->sk_xprt);
-		} else
-			len += onelen;
-	}
-	spin_unlock_bh(&serv->sv_lock);
-
-	if (closesk) {
-		/* Should unregister with portmap, but you cannot
-		 * unregister just one protocol...
-		 */
-		svc_close_xprt(&closesk->sk_xprt);
-		svc_xprt_put(&closesk->sk_xprt);
-	} else if (toclose)
-		return -ENOENT;
-	return len;
-}
-EXPORT_SYMBOL_GPL(svc_sock_names);
-
 /*
  * Check input queue length
  */
@@ -598,11 +547,9 @@
 			dprintk("svc: recvfrom returned error %d\n", -err);
 			set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
 		}
-		return -EAGAIN;
+		return 0;
 	}
 	len = svc_addr_len(svc_addr(rqstp));
-	if (len == 0)
-		return -EAFNOSUPPORT;
 	rqstp->rq_addrlen = len;
 	if (skb->tstamp.tv64 == 0) {
 		skb->tstamp = ktime_get_real();
@@ -620,10 +567,7 @@
 	if (!svc_udp_get_dest_address(rqstp, cmh)) {
 		net_warn_ratelimited("svc: received unknown control message %d/%d; dropping RPC reply datagram\n",
 				     cmh->cmsg_level, cmh->cmsg_type);
-out_free:
-		trace_kfree_skb(skb, svc_udp_recvfrom);
-		skb_free_datagram_locked(svsk->sk_sk, skb);
-		return 0;
+		goto out_free;
 	}
 	rqstp->rq_daddrlen = svc_addr_len(svc_daddr(rqstp));
 
@@ -662,6 +606,10 @@
 		serv->sv_stats->netudpcnt++;
 
 	return len;
+out_free:
+	trace_kfree_skb(skb, svc_udp_recvfrom);
+	skb_free_datagram_locked(svsk->sk_sk, skb);
+	return 0;
 }
 
 static int
@@ -900,8 +848,9 @@
 	 */
 	newsock->sk->sk_sndtimeo = HZ*30;
 
-	if (!(newsvsk = svc_setup_socket(serv, newsock, &err,
-				 (SVC_SOCK_ANONYMOUS | SVC_SOCK_TEMPORARY))))
+	newsvsk = svc_setup_socket(serv, newsock,
+				 (SVC_SOCK_ANONYMOUS | SVC_SOCK_TEMPORARY));
+	if (IS_ERR(newsvsk))
 		goto failed;
 	svc_xprt_set_remote(&newsvsk->sk_xprt, sin, slen);
 	err = kernel_getsockname(newsock, sin, &slen);
@@ -1174,13 +1123,13 @@
 	if (len != -EAGAIN)
 		goto err_other;
 	dprintk("RPC: TCP recvfrom got EAGAIN\n");
-	return -EAGAIN;
+	return 0;
 err_other:
 	printk(KERN_NOTICE "%s: recvfrom returned errno %d\n",
 	       svsk->sk_xprt.xpt_server->sv_name, -len);
 	set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
 err_noclose:
-	return -EAGAIN;	/* record not complete */
+	return 0;	/* record not complete */
 }
 
 /*
@@ -1383,29 +1332,29 @@
  */
 static struct svc_sock *svc_setup_socket(struct svc_serv *serv,
 						struct socket *sock,
-						int *errp, int flags)
+						int flags)
 {
 	struct svc_sock	*svsk;
 	struct sock	*inet;
 	int		pmap_register = !(flags & SVC_SOCK_ANONYMOUS);
+	int		err = 0;
 
 	dprintk("svc: svc_setup_socket %p\n", sock);
-	if (!(svsk = kzalloc(sizeof(*svsk), GFP_KERNEL))) {
-		*errp = -ENOMEM;
-		return NULL;
-	}
+	svsk = kzalloc(sizeof(*svsk), GFP_KERNEL);
+	if (!svsk)
+		return ERR_PTR(-ENOMEM);
 
 	inet = sock->sk;
 
 	/* Register socket with portmapper */
-	if (*errp >= 0 && pmap_register)
-		*errp = svc_register(serv, sock_net(sock->sk), inet->sk_family,
+	if (pmap_register)
+		err = svc_register(serv, sock_net(sock->sk), inet->sk_family,
 				     inet->sk_protocol,
 				     ntohs(inet_sk(inet)->inet_sport));
 
-	if (*errp < 0) {
+	if (err < 0) {
 		kfree(svsk);
-		return NULL;
+		return ERR_PTR(err);
 	}
 
 	inet->sk_user_data = svsk;
@@ -1450,42 +1399,38 @@
 	int err = 0;
 	struct socket *so = sockfd_lookup(fd, &err);
 	struct svc_sock *svsk = NULL;
+	struct sockaddr_storage addr;
+	struct sockaddr *sin = (struct sockaddr *)&addr;
+	int salen;
 
 	if (!so)
 		return err;
+	err = -EAFNOSUPPORT;
 	if ((so->sk->sk_family != PF_INET) && (so->sk->sk_family != PF_INET6))
-		err =  -EAFNOSUPPORT;
-	else if (so->sk->sk_protocol != IPPROTO_TCP &&
+		goto out;
+	err =  -EPROTONOSUPPORT;
+	if (so->sk->sk_protocol != IPPROTO_TCP &&
 	    so->sk->sk_protocol != IPPROTO_UDP)
-		err =  -EPROTONOSUPPORT;
-	else if (so->state > SS_UNCONNECTED)
-		err = -EISCONN;
-	else {
-		if (!try_module_get(THIS_MODULE))
-			err = -ENOENT;
-		else
-			svsk = svc_setup_socket(serv, so, &err,
-						SVC_SOCK_DEFAULTS);
-		if (svsk) {
-			struct sockaddr_storage addr;
-			struct sockaddr *sin = (struct sockaddr *)&addr;
-			int salen;
-			if (kernel_getsockname(svsk->sk_sock, sin, &salen) == 0)
-				svc_xprt_set_local(&svsk->sk_xprt, sin, salen);
-			clear_bit(XPT_TEMP, &svsk->sk_xprt.xpt_flags);
-			spin_lock_bh(&serv->sv_lock);
-			list_add(&svsk->sk_xprt.xpt_list, &serv->sv_permsocks);
-			spin_unlock_bh(&serv->sv_lock);
-			svc_xprt_received(&svsk->sk_xprt);
-			err = 0;
-		} else
-			module_put(THIS_MODULE);
+		goto out;
+	err = -EISCONN;
+	if (so->state > SS_UNCONNECTED)
+		goto out;
+	err = -ENOENT;
+	if (!try_module_get(THIS_MODULE))
+		goto out;
+	svsk = svc_setup_socket(serv, so, SVC_SOCK_DEFAULTS);
+	if (IS_ERR(svsk)) {
+		module_put(THIS_MODULE);
+		err = PTR_ERR(svsk);
+		goto out;
 	}
-	if (err) {
-		sockfd_put(so);
-		return err;
-	}
+	if (kernel_getsockname(svsk->sk_sock, sin, &salen) == 0)
+		svc_xprt_set_local(&svsk->sk_xprt, sin, salen);
+	svc_add_new_perm_xprt(serv, &svsk->sk_xprt);
 	return svc_one_sock_name(svsk, name_return, len);
+out:
+	sockfd_put(so);
+	return err;
 }
 EXPORT_SYMBOL_GPL(svc_addsock);
 
@@ -1563,11 +1508,13 @@
 			goto bummer;
 	}
 
-	if ((svsk = svc_setup_socket(serv, sock, &error, flags)) != NULL) {
-		svc_xprt_set_local(&svsk->sk_xprt, newsin, newlen);
-		return (struct svc_xprt *)svsk;
+	svsk = svc_setup_socket(serv, sock, flags);
+	if (IS_ERR(svsk)) {
+		error = PTR_ERR(svsk);
+		goto bummer;
 	}
-
+	svc_xprt_set_local(&svsk->sk_xprt, newsin, newlen);
+	return (struct svc_xprt *)svsk;
 bummer:
 	dprintk("svc: svc_create_socket error = %d\n", -error);
 	sock_release(sock);
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 73b428b..62e4f9b 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -578,10 +578,6 @@
 	list_add_tail(&newxprt->sc_accept_q, &listen_xprt->sc_accept_q);
 	spin_unlock_bh(&listen_xprt->sc_lock);
 
-	/*
-	 * Can't use svc_xprt_received here because we are not on a
-	 * rqstp thread
-	*/
 	set_bit(XPT_CONN, &listen_xprt->sc_xprt.xpt_flags);
 	svc_xprt_enqueue(&listen_xprt->sc_xprt);
 }
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 86258c2..2472645 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -45,6 +45,8 @@
 #
 # Define NO_LIBUNWIND if you do not want libunwind dependency for dwarf
 # backtrace post unwind.
+#
+# Define NO_BACKTRACE if you do not want stack backtrace debug feature
 
 $(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
 	@$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
@@ -185,7 +187,7 @@
 PYTHON_EXT_SRCS := $(shell grep -v ^\# util/python-ext-sources)
 PYTHON_EXT_DEPS := util/python-ext-sources util/setup.py
 
-$(OUTPUT)python/perf.so: $(PYRF_OBJS) $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS)
+$(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS)
 	$(QUIET_GEN)CFLAGS='$(BASIC_CFLAGS)' $(PYTHON_WORD) util/setup.py \
 	  --quiet build_ext; \
 	mkdir -p $(OUTPUT)python && \
@@ -268,6 +270,7 @@
 LIB_H += util/include/linux/poison.h
 LIB_H += util/include/linux/prefetch.h
 LIB_H += util/include/linux/rbtree.h
+LIB_H += util/include/linux/rbtree_augmented.h
 LIB_H += util/include/linux/string.h
 LIB_H += util/include/linux/types.h
 LIB_H += util/include/linux/linkage.h
@@ -446,20 +449,6 @@
 
 PERFLIBS = $(LIB_FILE) $(LIBTRACEEVENT)
 
-# Files needed for the python binding, perf.so
-# pyrf is just an internal name needed for all those wrappers.
-# This has to be in sync with what is in the 'sources' variable in
-# tools/perf/util/setup.py
-
-PYRF_OBJS += $(OUTPUT)util/cpumap.o
-PYRF_OBJS += $(OUTPUT)util/ctype.o
-PYRF_OBJS += $(OUTPUT)util/evlist.o
-PYRF_OBJS += $(OUTPUT)util/evsel.o
-PYRF_OBJS += $(OUTPUT)util/python.o
-PYRF_OBJS += $(OUTPUT)util/thread_map.o
-PYRF_OBJS += $(OUTPUT)util/util.o
-PYRF_OBJS += $(OUTPUT)util/xyarray.o
-
 #
 # Platform specific tweaks
 #
@@ -486,7 +475,13 @@
 		NO_DWARF := 1
 		NO_DEMANGLE := 1
 	endif
-endif
+else
+	FLAGS_DWARF=$(ALL_CFLAGS) -ldw -lelf $(ALL_LDFLAGS) $(EXTLIBS)
+	ifneq ($(call try-cc,$(SOURCE_DWARF),$(FLAGS_DWARF)),y)
+		msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
+		NO_DWARF := 1
+	endif # Dwarf support
+endif # SOURCE_LIBELF
 endif # NO_LIBELF
 
 ifndef NO_LIBUNWIND
@@ -511,8 +506,6 @@
 endif
 
 ifdef NO_LIBELF
-BASIC_CFLAGS += -DNO_LIBELF_SUPPORT
-
 EXTLIBS := $(filter-out -lelf,$(EXTLIBS))
 
 # Remove ELF/DWARF dependent codes
@@ -527,17 +520,12 @@
 LIB_OBJS += $(OUTPUT)util/symbol-minimal.o
 
 else # NO_LIBELF
+BASIC_CFLAGS += -DLIBELF_SUPPORT
 
-ifneq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_COMMON)),y)
-	BASIC_CFLAGS += -DLIBELF_NO_MMAP
+ifeq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_COMMON)),y)
+	BASIC_CFLAGS += -DLIBELF_MMAP
 endif
 
-FLAGS_DWARF=$(ALL_CFLAGS) -ldw -lelf $(ALL_LDFLAGS) $(EXTLIBS)
-ifneq ($(call try-cc,$(SOURCE_DWARF),$(FLAGS_DWARF)),y)
-	msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
-	NO_DWARF := 1
-endif # Dwarf support
-
 ifndef NO_DWARF
 ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
 	msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
@@ -550,38 +538,33 @@
 endif # NO_DWARF
 endif # NO_LIBELF
 
-ifdef NO_LIBUNWIND
-	BASIC_CFLAGS += -DNO_LIBUNWIND_SUPPORT
-else
+ifndef NO_LIBUNWIND
+	BASIC_CFLAGS += -DLIBUNWIND_SUPPORT
 	EXTLIBS += $(LIBUNWIND_LIBS)
 	BASIC_CFLAGS := $(LIBUNWIND_CFLAGS) $(BASIC_CFLAGS)
 	BASIC_LDFLAGS := $(LIBUNWIND_LDFLAGS) $(BASIC_LDFLAGS)
 	LIB_OBJS += $(OUTPUT)util/unwind.o
 endif
 
-ifdef NO_LIBAUDIT
-	BASIC_CFLAGS += -DNO_LIBAUDIT_SUPPORT
-else
+ifndef NO_LIBAUDIT
 	FLAGS_LIBAUDIT = $(ALL_CFLAGS) $(ALL_LDFLAGS) -laudit
 	ifneq ($(call try-cc,$(SOURCE_LIBAUDIT),$(FLAGS_LIBAUDIT)),y)
 		msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev);
-		BASIC_CFLAGS += -DNO_LIBAUDIT_SUPPORT
 	else
+		BASIC_CFLAGS += -DLIBAUDIT_SUPPORT
 		BUILTIN_OBJS += $(OUTPUT)builtin-trace.o
 		EXTLIBS += -laudit
 	endif
 endif
 
-ifdef NO_NEWT
-	BASIC_CFLAGS += -DNO_NEWT_SUPPORT
-else
+ifndef NO_NEWT
 	FLAGS_NEWT=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -lnewt
 	ifneq ($(call try-cc,$(SOURCE_NEWT),$(FLAGS_NEWT)),y)
 		msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev);
-		BASIC_CFLAGS += -DNO_NEWT_SUPPORT
 	else
 		# Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
 		BASIC_CFLAGS += -I/usr/include/slang
+		BASIC_CFLAGS += -DNEWT_SUPPORT
 		EXTLIBS += -lnewt -lslang
 		LIB_OBJS += $(OUTPUT)ui/setup.o
 		LIB_OBJS += $(OUTPUT)ui/browser.o
@@ -603,17 +586,15 @@
 	endif
 endif
 
-ifdef NO_GTK2
-	BASIC_CFLAGS += -DNO_GTK2_SUPPORT
-else
+ifndef NO_GTK2
 	FLAGS_GTK2=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
 	ifneq ($(call try-cc,$(SOURCE_GTK2),$(FLAGS_GTK2)),y)
 		msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev);
-		BASIC_CFLAGS += -DNO_GTK2_SUPPORT
 	else
 		ifeq ($(call try-cc,$(SOURCE_GTK2_INFOBAR),$(FLAGS_GTK2)),y)
 			BASIC_CFLAGS += -DHAVE_GTK_INFO_BAR
 		endif
+		BASIC_CFLAGS += -DGTK2_SUPPORT
 		BASIC_CFLAGS += $(shell pkg-config --cflags gtk+-2.0 2>/dev/null)
 		EXTLIBS += $(shell pkg-config --libs gtk+-2.0 2>/dev/null)
 		LIB_OBJS += $(OUTPUT)ui/gtk/browser.o
@@ -621,7 +602,7 @@
 		LIB_OBJS += $(OUTPUT)ui/gtk/util.o
 		LIB_OBJS += $(OUTPUT)ui/gtk/helpline.o
 		# Make sure that it'd be included only once.
-		ifneq ($(findstring -DNO_NEWT_SUPPORT,$(BASIC_CFLAGS)),)
+		ifeq ($(findstring -DNEWT_SUPPORT,$(BASIC_CFLAGS)),)
 			LIB_OBJS += $(OUTPUT)ui/setup.o
 			LIB_OBJS += $(OUTPUT)ui/util.o
 		endif
@@ -762,23 +743,18 @@
 	ifeq ($(ARCH),x86)
 		LIB_H += arch/x86/include/perf_regs.h
 	endif
-else
-	BASIC_CFLAGS += -DNO_PERF_REGS
+	BASIC_CFLAGS += -DHAVE_PERF_REGS
 endif
 
-ifdef NO_STRLCPY
-	BASIC_CFLAGS += -DNO_STRLCPY
-else
-	ifneq ($(call try-cc,$(SOURCE_STRLCPY),),y)
-		BASIC_CFLAGS += -DNO_STRLCPY
+ifndef NO_STRLCPY
+	ifeq ($(call try-cc,$(SOURCE_STRLCPY),),y)
+		BASIC_CFLAGS += -DHAVE_STRLCPY
 	endif
 endif
 
-ifdef NO_BACKTRACE
-       BASIC_CFLAGS += -DNO_BACKTRACE
-else
-       ifneq ($(call try-cc,$(SOURCE_BACKTRACE),),y)
-               BASIC_CFLAGS += -DNO_BACKTRACE
+ifndef NO_BACKTRACE
+       ifeq ($(call try-cc,$(SOURCE_BACKTRACE),),y)
+               BASIC_CFLAGS += -DBACKTRACE_SUPPORT
        endif
 endif
 
@@ -906,7 +882,7 @@
 	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
 
 $(OUTPUT)util/rbtree.o: ../../lib/rbtree.c $(OUTPUT)PERF-CFLAGS
-	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
+	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -Wno-unused-parameter -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
 
 $(OUTPUT)util/parse-events.o: util/parse-events.c $(OUTPUT)PERF-CFLAGS
 	$(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -Wno-redundant-decls $<
diff --git a/tools/perf/bash_completion b/tools/perf/bash_completion
index 1958fa5..56e6a12 100644
--- a/tools/perf/bash_completion
+++ b/tools/perf/bash_completion
@@ -1,23 +1,59 @@
 # perf completion
 
+function_exists()
+{
+	declare -F $1 > /dev/null
+	return $?
+}
+
+function_exists __ltrim_colon_completions ||
+__ltrim_colon_completions()
+{
+	if [[ "$1" == *:* && "$COMP_WORDBREAKS" == *:* ]]; then
+		# Remove colon-word prefix from COMPREPLY items
+		local colon_word=${1%${1##*:}}
+		local i=${#COMPREPLY[*]}
+		while [[ $((--i)) -ge 0 ]]; do
+			COMPREPLY[$i]=${COMPREPLY[$i]#"$colon_word"}
+		done
+	fi
+}
+
 have perf &&
 _perf()
 {
-	local cur cmd
+	local cur prev cmd
 
 	COMPREPLY=()
-	_get_comp_words_by_ref cur prev
+	if function_exists _get_comp_words_by_ref; then
+		_get_comp_words_by_ref -n : cur prev
+	else
+		cur=$(_get_cword :)
+		prev=${COMP_WORDS[COMP_CWORD-1]}
+	fi
 
 	cmd=${COMP_WORDS[0]}
 
-	# List perf subcommands
+	# List perf subcommands or long options
 	if [ $COMP_CWORD -eq 1 ]; then
-		cmds=$($cmd --list-cmds)
-		COMPREPLY=( $( compgen -W '$cmds' -- "$cur" ) )
+		if [[ $cur == --* ]]; then
+			COMPREPLY=( $( compgen -W '--help --version \
+			--exec-path --html-path --paginate --no-pager \
+			--perf-dir --work-tree --debugfs-dir' -- "$cur" ) )
+		else
+			cmds=$($cmd --list-cmds)
+			COMPREPLY=( $( compgen -W '$cmds' -- "$cur" ) )
+		fi
 	# List possible events for -e option
 	elif [[ $prev == "-e" && "${COMP_WORDS[1]}" == @(record|stat|top) ]]; then
-		cmds=$($cmd list --raw-dump)
-		COMPREPLY=( $( compgen -W '$cmds' -- "$cur" ) )
+		evts=$($cmd list --raw-dump)
+		COMPREPLY=( $( compgen -W '$evts' -- "$cur" ) )
+		__ltrim_colon_completions $cur
+	# List long option names
+	elif [[ $cur == --* ]];  then
+		subcmd=${COMP_WORDS[1]}
+		opts=$($cmd $subcmd --list-opts)
+		COMPREPLY=( $( compgen -W '$opts' -- "$cur" ) )
 	# Fall down to list regular files
 	else
 		_filedir
diff --git a/tools/perf/builtin-buildid-cache.c b/tools/perf/builtin-buildid-cache.c
index 8365455..d37e077 100644
--- a/tools/perf/builtin-buildid-cache.c
+++ b/tools/perf/builtin-buildid-cache.c
@@ -15,22 +15,6 @@
 #include "util/strlist.h"
 #include "util/symbol.h"
 
-static char const *add_name_list_str, *remove_name_list_str;
-
-static const char * const buildid_cache_usage[] = {
-	"perf buildid-cache [<options>]",
-	NULL
-};
-
-static const struct option buildid_cache_options[] = {
-	OPT_STRING('a', "add", &add_name_list_str,
-		   "file list", "file(s) to add"),
-	OPT_STRING('r', "remove", &remove_name_list_str, "file list",
-		    "file(s) to remove"),
-	OPT_INCR('v', "verbose", &verbose, "be more verbose"),
-	OPT_END()
-};
-
 static int build_id_cache__add_file(const char *filename, const char *debugdir)
 {
 	char sbuild_id[BUILD_ID_SIZE * 2 + 1];
@@ -51,8 +35,8 @@
 	return err;
 }
 
-static int build_id_cache__remove_file(const char *filename __maybe_unused,
-				       const char *debugdir __maybe_unused)
+static int build_id_cache__remove_file(const char *filename,
+				       const char *debugdir)
 {
 	u8 build_id[BUILD_ID_SIZE];
 	char sbuild_id[BUILD_ID_SIZE * 2 + 1];
@@ -73,11 +57,34 @@
 	return err;
 }
 
-static int __cmd_buildid_cache(void)
+int cmd_buildid_cache(int argc, const char **argv,
+		      const char *prefix __maybe_unused)
 {
 	struct strlist *list;
 	struct str_node *pos;
 	char debugdir[PATH_MAX];
+	char const *add_name_list_str = NULL,
+		   *remove_name_list_str = NULL;
+	const struct option buildid_cache_options[] = {
+	OPT_STRING('a', "add", &add_name_list_str,
+		   "file list", "file(s) to add"),
+	OPT_STRING('r', "remove", &remove_name_list_str, "file list",
+		    "file(s) to remove"),
+	OPT_INCR('v', "verbose", &verbose, "be more verbose"),
+	OPT_END()
+	};
+	const char * const buildid_cache_usage[] = {
+		"perf buildid-cache [<options>]",
+		NULL
+	};
+
+	argc = parse_options(argc, argv, buildid_cache_options,
+			     buildid_cache_usage, 0);
+
+	if (symbol__init() < 0)
+		return -1;
+
+	setup_pager();
 
 	snprintf(debugdir, sizeof(debugdir), "%s", buildid_dir);
 
@@ -119,16 +126,3 @@
 
 	return 0;
 }
-
-int cmd_buildid_cache(int argc, const char **argv,
-		      const char *prefix __maybe_unused)
-{
-	argc = parse_options(argc, argv, buildid_cache_options,
-			     buildid_cache_usage, 0);
-
-	if (symbol__init() < 0)
-		return -1;
-
-	setup_pager();
-	return __cmd_buildid_cache();
-}
diff --git a/tools/perf/builtin-buildid-list.c b/tools/perf/builtin-buildid-list.c
index 1159fee..a0e94ff 100644
--- a/tools/perf/builtin-buildid-list.c
+++ b/tools/perf/builtin-buildid-list.c
@@ -16,27 +16,6 @@
 #include "util/session.h"
 #include "util/symbol.h"
 
-static const char *input_name;
-static bool force;
-static bool show_kernel;
-static bool with_hits;
-
-static const char * const buildid_list_usage[] = {
-	"perf buildid-list [<options>]",
-	NULL
-};
-
-static const struct option options[] = {
-	OPT_BOOLEAN('H', "with-hits", &with_hits, "Show only DSOs with hits"),
-	OPT_STRING('i', "input", &input_name, "file",
-		    "input file name"),
-	OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
-	OPT_BOOLEAN('k', "kernel", &show_kernel, "Show current kernel build id"),
-	OPT_INCR('v', "verbose", &verbose,
-		    "be more verbose"),
-	OPT_END()
-};
-
 static int sysfs__fprintf_build_id(FILE *fp)
 {
 	u8 kallsyms_build_id[BUILD_ID_SIZE];
@@ -65,7 +44,8 @@
 	return fprintf(fp, "%s\n", sbuild_id);
 }
 
-static int perf_session__list_build_ids(void)
+static int perf_session__list_build_ids(const char *input_name,
+					bool force, bool with_hits)
 {
 	struct perf_session *session;
 
@@ -95,18 +75,31 @@
 	return 0;
 }
 
-static int __cmd_buildid_list(void)
-{
-	if (show_kernel)
-		return sysfs__fprintf_build_id(stdout);
-
-	return perf_session__list_build_ids();
-}
-
 int cmd_buildid_list(int argc, const char **argv,
 		     const char *prefix __maybe_unused)
 {
+	bool show_kernel = false;
+	bool with_hits = false;
+	bool force = false;
+	const char *input_name = NULL;
+	const struct option options[] = {
+	OPT_BOOLEAN('H', "with-hits", &with_hits, "Show only DSOs with hits"),
+	OPT_STRING('i', "input", &input_name, "file", "input file name"),
+	OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
+	OPT_BOOLEAN('k', "kernel", &show_kernel, "Show current kernel build id"),
+	OPT_INCR('v', "verbose", &verbose, "be more verbose"),
+	OPT_END()
+	};
+	const char * const buildid_list_usage[] = {
+		"perf buildid-list [<options>]",
+		NULL
+	};
+
 	argc = parse_options(argc, argv, options, buildid_list_usage, 0);
 	setup_pager();
-	return __cmd_buildid_list();
+
+	if (show_kernel)
+		return sysfs__fprintf_build_id(stdout);
+
+	return perf_session__list_build_ids(input_name, force, with_hits);
 }
diff --git a/tools/perf/builtin-diff.c b/tools/perf/builtin-diff.c
index 761f419..a0b531c 100644
--- a/tools/perf/builtin-diff.c
+++ b/tools/perf/builtin-diff.c
@@ -70,8 +70,8 @@
 	.ordering_requires_timestamps = true,
 };
 
-static void perf_session__insert_hist_entry_by_name(struct rb_root *root,
-						    struct hist_entry *he)
+static void insert_hist_entry_by_name(struct rb_root *root,
+				      struct hist_entry *he)
 {
 	struct rb_node **p = &root->rb_node;
 	struct rb_node *parent = NULL;
@@ -90,7 +90,7 @@
 	rb_insert_color(&he->rb_node, root);
 }
 
-static void hists__resort_entries(struct hists *self)
+static void hists__name_resort(struct hists *self, bool sort)
 {
 	unsigned long position = 1;
 	struct rb_root tmp = RB_ROOT;
@@ -100,12 +100,16 @@
 		struct hist_entry *n = rb_entry(next, struct hist_entry, rb_node);
 
 		next = rb_next(&n->rb_node);
-		rb_erase(&n->rb_node, &self->entries);
 		n->position = position++;
-		perf_session__insert_hist_entry_by_name(&tmp, n);
+
+		if (sort) {
+			rb_erase(&n->rb_node, &self->entries);
+			insert_hist_entry_by_name(&tmp, n);
+		}
 	}
 
-	self->entries = tmp;
+	if (sort)
+		self->entries = tmp;
 }
 
 static struct hist_entry *hists__find_entry(struct hists *self,
@@ -121,7 +125,7 @@
 			n = n->rb_left;
 		else if (cmp > 0)
 			n = n->rb_right;
-		else 
+		else
 			return iter;
 	}
 
@@ -150,6 +154,24 @@
 	return NULL;
 }
 
+static void perf_evlist__resort_hists(struct perf_evlist *evlist, bool name)
+{
+	struct perf_evsel *evsel;
+
+	list_for_each_entry(evsel, &evlist->entries, node) {
+		struct hists *hists = &evsel->hists;
+
+		hists__output_resort(hists);
+
+		/*
+		 * The hists__name_resort only sets possition
+		 * if name is false.
+		 */
+		if (name || ((!name) && show_displacement))
+			hists__name_resort(hists, name);
+	}
+}
+
 static int __cmd_diff(void)
 {
 	int ret, i;
@@ -176,15 +198,8 @@
 	evlist_old = older->evlist;
 	evlist_new = newer->evlist;
 
-	list_for_each_entry(evsel, &evlist_new->entries, node)
-		hists__output_resort(&evsel->hists);
-
-	list_for_each_entry(evsel, &evlist_old->entries, node) {
-		hists__output_resort(&evsel->hists);
-
-		if (show_displacement)
-			hists__resort_entries(&evsel->hists);
-	}
+	perf_evlist__resort_hists(evlist_old, true);
+	perf_evlist__resort_hists(evlist_new, false);
 
 	list_for_each_entry(evsel, &evlist_new->entries, node) {
 		struct perf_evsel *evsel_old;
@@ -199,8 +214,7 @@
 		first = false;
 
 		hists__match(&evsel_old->hists, &evsel->hists);
-		hists__fprintf(&evsel->hists, &evsel_old->hists,
-			       show_displacement, true, 0, 0, stdout);
+		hists__fprintf(&evsel->hists, true, 0, 0, stdout);
 	}
 
 out_delete:
@@ -242,6 +256,21 @@
 	OPT_END()
 };
 
+static void ui_init(void)
+{
+	perf_hpp__init();
+
+	/* No overhead column. */
+	perf_hpp__column_enable(PERF_HPP__OVERHEAD, false);
+
+	/* Display baseline/delta/displacement columns. */
+	perf_hpp__column_enable(PERF_HPP__BASELINE, true);
+	perf_hpp__column_enable(PERF_HPP__DELTA, true);
+
+	if (show_displacement)
+		perf_hpp__column_enable(PERF_HPP__DISPL, true);
+}
+
 int cmd_diff(int argc, const char **argv, const char *prefix __maybe_unused)
 {
 	sort_order = diff__default_sort_order;
@@ -264,7 +293,8 @@
 	if (symbol__init() < 0)
 		return -1;
 
-	perf_hpp__init(true, show_displacement);
+	ui_init();
+
 	setup_sorting(diff_usage, options);
 	setup_pager();
 
diff --git a/tools/perf/builtin-evlist.c b/tools/perf/builtin-evlist.c
index 1fb1641..997afb8 100644
--- a/tools/perf/builtin-evlist.c
+++ b/tools/perf/builtin-evlist.c
@@ -108,23 +108,20 @@
 	return 0;
 }
 
-static const char * const evlist_usage[] = {
-	"perf evlist [<options>]",
-	NULL
-};
-
 int cmd_evlist(int argc, const char **argv, const char *prefix __maybe_unused)
 {
 	struct perf_attr_details details = { .verbose = false, };
 	const char *input_name = NULL;
 	const struct option options[] = {
-		OPT_STRING('i', "input", &input_name, "file",
-			    "Input file name"),
-		OPT_BOOLEAN('F', "freq", &details.freq,
-			    "Show the sample frequency"),
-		OPT_BOOLEAN('v', "verbose", &details.verbose,
-			    "Show all event attr details"),
-		OPT_END()
+	OPT_STRING('i', "input", &input_name, "file", "Input file name"),
+	OPT_BOOLEAN('F', "freq", &details.freq, "Show the sample frequency"),
+	OPT_BOOLEAN('v', "verbose", &details.verbose,
+		    "Show all event attr details"),
+	OPT_END()
+	};
+	const char * const evlist_usage[] = {
+		"perf evlist [<options>]",
+		NULL
 	};
 
 	argc = parse_options(argc, argv, options, evlist_usage, 0);
diff --git a/tools/perf/builtin-help.c b/tools/perf/builtin-help.c
index 25c8b94..411ee56 100644
--- a/tools/perf/builtin-help.c
+++ b/tools/perf/builtin-help.c
@@ -30,23 +30,6 @@
 	HELP_FORMAT_WEB,
 };
 
-static bool show_all = false;
-static enum help_format help_format = HELP_FORMAT_NONE;
-static struct option builtin_help_options[] = {
-	OPT_BOOLEAN('a', "all", &show_all, "print all available commands"),
-	OPT_SET_UINT('m', "man", &help_format, "show man page", HELP_FORMAT_MAN),
-	OPT_SET_UINT('w', "web", &help_format, "show manual in web browser",
-			HELP_FORMAT_WEB),
-	OPT_SET_UINT('i', "info", &help_format, "show info page",
-			HELP_FORMAT_INFO),
-	OPT_END(),
-};
-
-static const char * const builtin_help_usage[] = {
-	"perf help [--all] [--man|--web|--info] [command]",
-	NULL
-};
-
 static enum help_format parse_help_format(const char *format)
 {
 	if (!strcmp(format, "man"))
@@ -258,11 +241,13 @@
 
 static int perf_help_config(const char *var, const char *value, void *cb)
 {
+	enum help_format *help_formatp = cb;
+
 	if (!strcmp(var, "help.format")) {
 		if (!value)
 			return config_error_nonbool(var);
-		help_format = parse_help_format(value);
-		if (help_format == HELP_FORMAT_NONE)
+		*help_formatp = parse_help_format(value);
+		if (*help_formatp == HELP_FORMAT_NONE)
 			return -1;
 		return 0;
 	}
@@ -428,12 +413,27 @@
 
 int cmd_help(int argc, const char **argv, const char *prefix __maybe_unused)
 {
+	bool show_all = false;
+	enum help_format help_format = HELP_FORMAT_NONE;
+	struct option builtin_help_options[] = {
+	OPT_BOOLEAN('a', "all", &show_all, "print all available commands"),
+	OPT_SET_UINT('m', "man", &help_format, "show man page", HELP_FORMAT_MAN),
+	OPT_SET_UINT('w', "web", &help_format, "show manual in web browser",
+			HELP_FORMAT_WEB),
+	OPT_SET_UINT('i', "info", &help_format, "show info page",
+			HELP_FORMAT_INFO),
+	OPT_END(),
+	};
+	const char * const builtin_help_usage[] = {
+		"perf help [--all] [--man|--web|--info] [command]",
+		NULL
+	};
 	const char *alias;
 	int rc = 0;
 
 	load_command_list("perf-", &main_cmds, &other_cmds);
 
-	perf_config(perf_help_config, NULL);
+	perf_config(perf_help_config, &help_format);
 
 	argc = parse_options(argc, argv, builtin_help_options,
 			builtin_help_usage, 0);
diff --git a/tools/perf/builtin-inject.c b/tools/perf/builtin-inject.c
index 1eaa661..4688bea 100644
--- a/tools/perf/builtin-inject.c
+++ b/tools/perf/builtin-inject.c
@@ -14,8 +14,10 @@
 
 #include "util/parse-options.h"
 
-static char		const *input_name = "-";
-static bool		inject_build_ids;
+struct perf_inject {
+	struct perf_tool tool;
+	bool		 build_ids;
+};
 
 static int perf_event__repipe_synth(struct perf_tool *tool __maybe_unused,
 				    union perf_event *event,
@@ -194,7 +196,7 @@
 				 * account this as unresolved.
 				 */
 			} else {
-#ifndef NO_LIBELF_SUPPORT
+#ifdef LIBELF_SUPPORT
 				pr_warning("no symbols found in %s, maybe "
 					   "install a debug package?\n",
 					   al.map->dso->long_name);
@@ -208,22 +210,6 @@
 	return 0;
 }
 
-struct perf_tool perf_inject = {
-	.sample		= perf_event__repipe_sample,
-	.mmap		= perf_event__repipe,
-	.comm		= perf_event__repipe,
-	.fork		= perf_event__repipe,
-	.exit		= perf_event__repipe,
-	.lost		= perf_event__repipe,
-	.read		= perf_event__repipe_sample,
-	.throttle	= perf_event__repipe,
-	.unthrottle	= perf_event__repipe,
-	.attr		= perf_event__repipe_attr,
-	.event_type	= perf_event__repipe_event_type_synth,
-	.tracing_data	= perf_event__repipe_tracing_data_synth,
-	.build_id	= perf_event__repipe_op2_synth,
-};
-
 extern volatile int session_done;
 
 static void sig_handler(int sig __maybe_unused)
@@ -231,56 +217,72 @@
 	session_done = 1;
 }
 
-static int __cmd_inject(void)
+static int __cmd_inject(struct perf_inject *inject)
 {
 	struct perf_session *session;
 	int ret = -EINVAL;
 
 	signal(SIGINT, sig_handler);
 
-	if (inject_build_ids) {
-		perf_inject.sample	 = perf_event__inject_buildid;
-		perf_inject.mmap	 = perf_event__repipe_mmap;
-		perf_inject.fork	 = perf_event__repipe_task;
-		perf_inject.tracing_data = perf_event__repipe_tracing_data;
+	if (inject->build_ids) {
+		inject->tool.sample	  = perf_event__inject_buildid;
+		inject->tool.mmap	  = perf_event__repipe_mmap;
+		inject->tool.fork	  = perf_event__repipe_task;
+		inject->tool.tracing_data = perf_event__repipe_tracing_data;
 	}
 
-	session = perf_session__new(input_name, O_RDONLY, false, true, &perf_inject);
+	session = perf_session__new("-", O_RDONLY, false, true, &inject->tool);
 	if (session == NULL)
 		return -ENOMEM;
 
-	ret = perf_session__process_events(session, &perf_inject);
+	ret = perf_session__process_events(session, &inject->tool);
 
 	perf_session__delete(session);
 
 	return ret;
 }
 
-static const char * const report_usage[] = {
-	"perf inject [<options>]",
-	NULL
-};
-
-static const struct option options[] = {
-	OPT_BOOLEAN('b', "build-ids", &inject_build_ids,
-		    "Inject build-ids into the output stream"),
-	OPT_INCR('v', "verbose", &verbose,
-		 "be more verbose (show build ids, etc)"),
-	OPT_END()
-};
-
 int cmd_inject(int argc, const char **argv, const char *prefix __maybe_unused)
 {
-	argc = parse_options(argc, argv, options, report_usage, 0);
+	struct perf_inject inject = {
+		.tool = {
+			.sample		= perf_event__repipe_sample,
+			.mmap		= perf_event__repipe,
+			.comm		= perf_event__repipe,
+			.fork		= perf_event__repipe,
+			.exit		= perf_event__repipe,
+			.lost		= perf_event__repipe,
+			.read		= perf_event__repipe_sample,
+			.throttle	= perf_event__repipe,
+			.unthrottle	= perf_event__repipe,
+			.attr		= perf_event__repipe_attr,
+			.event_type	= perf_event__repipe_event_type_synth,
+			.tracing_data	= perf_event__repipe_tracing_data_synth,
+			.build_id	= perf_event__repipe_op2_synth,
+		},
+	};
+	const struct option options[] = {
+		OPT_BOOLEAN('b', "build-ids", &inject.build_ids,
+			    "Inject build-ids into the output stream"),
+		OPT_INCR('v', "verbose", &verbose,
+			 "be more verbose (show build ids, etc)"),
+		OPT_END()
+	};
+	const char * const inject_usage[] = {
+		"perf inject [<options>]",
+		NULL
+	};
+
+	argc = parse_options(argc, argv, options, inject_usage, 0);
 
 	/*
 	 * Any (unrecognized) arguments left?
 	 */
 	if (argc)
-		usage_with_options(report_usage, options);
+		usage_with_options(inject_usage, options);
 
 	if (symbol__init() < 0)
 		return -1;
 
-	return __cmd_inject();
+	return __cmd_inject(&inject);
 }
diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c
index bc912c6..14bf82f 100644
--- a/tools/perf/builtin-kmem.c
+++ b/tools/perf/builtin-kmem.c
@@ -21,8 +21,6 @@
 struct alloc_stat;
 typedef int (*sort_fn_t)(struct alloc_stat *, struct alloc_stat *);
 
-static const char		*input_name;
-
 static int			alloc_flag;
 static int			caller_flag;
 
@@ -31,8 +29,6 @@
 
 static bool			raw_ip;
 
-static char			default_sort_order[] = "frag,hit,bytes";
-
 static int			*cpunode_map;
 static int			max_cpu_num;
 
@@ -481,7 +477,7 @@
 	__sort_result(&root_caller_stat, &root_caller_sorted, &caller_sort);
 }
 
-static int __cmd_kmem(void)
+static int __cmd_kmem(const char *input_name)
 {
 	int err = -EINVAL;
 	struct perf_session *session;
@@ -520,11 +516,6 @@
 	return err;
 }
 
-static const char * const kmem_usage[] = {
-	"perf kmem [<options>] {record|stat}",
-	NULL
-};
-
 static int ptr_cmp(struct alloc_stat *l, struct alloc_stat *r)
 {
 	if (l->ptr < r->ptr)
@@ -720,41 +711,17 @@
 	return 0;
 }
 
-static const struct option kmem_options[] = {
-	OPT_STRING('i', "input", &input_name, "file",
-		   "input file name"),
-	OPT_CALLBACK_NOOPT(0, "caller", NULL, NULL,
-			   "show per-callsite statistics",
-			   parse_caller_opt),
-	OPT_CALLBACK_NOOPT(0, "alloc", NULL, NULL,
-			   "show per-allocation statistics",
-			   parse_alloc_opt),
-	OPT_CALLBACK('s', "sort", NULL, "key[,key2...]",
-		     "sort by keys: ptr, call_site, bytes, hit, pingpong, frag",
-		     parse_sort_opt),
-	OPT_CALLBACK('l', "line", NULL, "num",
-		     "show n lines",
-		     parse_line_opt),
-	OPT_BOOLEAN(0, "raw-ip", &raw_ip, "show raw ip instead of symbol"),
-	OPT_END()
-};
-
-static const char *record_args[] = {
-	"record",
-	"-a",
-	"-R",
-	"-f",
-	"-c", "1",
+static int __cmd_record(int argc, const char **argv)
+{
+	const char * const record_args[] = {
+	"record", "-a", "-R", "-f", "-c", "1",
 	"-e", "kmem:kmalloc",
 	"-e", "kmem:kmalloc_node",
 	"-e", "kmem:kfree",
 	"-e", "kmem:kmem_cache_alloc",
 	"-e", "kmem:kmem_cache_alloc_node",
 	"-e", "kmem:kmem_cache_free",
-};
-
-static int __cmd_record(int argc, const char **argv)
-{
+	};
 	unsigned int rec_argc, i, j;
 	const char **rec_argv;
 
@@ -775,6 +742,25 @@
 
 int cmd_kmem(int argc, const char **argv, const char *prefix __maybe_unused)
 {
+	const char * const default_sort_order = "frag,hit,bytes";
+	const char *input_name = NULL;
+	const struct option kmem_options[] = {
+	OPT_STRING('i', "input", &input_name, "file", "input file name"),
+	OPT_CALLBACK_NOOPT(0, "caller", NULL, NULL,
+			   "show per-callsite statistics", parse_caller_opt),
+	OPT_CALLBACK_NOOPT(0, "alloc", NULL, NULL,
+			   "show per-allocation statistics", parse_alloc_opt),
+	OPT_CALLBACK('s', "sort", NULL, "key[,key2...]",
+		     "sort by keys: ptr, call_site, bytes, hit, pingpong, frag",
+		     parse_sort_opt),
+	OPT_CALLBACK('l', "line", NULL, "num", "show n lines", parse_line_opt),
+	OPT_BOOLEAN(0, "raw-ip", &raw_ip, "show raw ip instead of symbol"),
+	OPT_END()
+	};
+	const char * const kmem_usage[] = {
+		"perf kmem [<options>] {record|stat}",
+		NULL
+	};
 	argc = parse_options(argc, argv, kmem_options, kmem_usage, 0);
 
 	if (!argc)
@@ -793,7 +779,7 @@
 		if (list_empty(&alloc_sort))
 			setup_sorting(&alloc_sort, default_sort_order);
 
-		return __cmd_kmem();
+		return __cmd_kmem(input_name);
 	} else
 		usage_with_options(kmem_usage, kmem_options);
 
diff --git a/tools/perf/builtin-kvm.c b/tools/perf/builtin-kvm.c
index a28c9ca..260abc5 100644
--- a/tools/perf/builtin-kvm.c
+++ b/tools/perf/builtin-kvm.c
@@ -32,16 +32,76 @@
 	int info;
 };
 
+struct kvm_event_stats {
+	u64 time;
+	struct stats stats;
+};
+
+struct kvm_event {
+	struct list_head hash_entry;
+	struct rb_node rb;
+
+	struct event_key key;
+
+	struct kvm_event_stats total;
+
+	#define DEFAULT_VCPU_NUM 8
+	int max_vcpu;
+	struct kvm_event_stats *vcpu;
+};
+
+typedef int (*key_cmp_fun)(struct kvm_event*, struct kvm_event*, int);
+
+struct kvm_event_key {
+	const char *name;
+	key_cmp_fun key;
+};
+
+
+struct perf_kvm;
+
 struct kvm_events_ops {
 	bool (*is_begin_event)(struct perf_evsel *evsel,
 			       struct perf_sample *sample,
 			       struct event_key *key);
 	bool (*is_end_event)(struct perf_evsel *evsel,
 			     struct perf_sample *sample, struct event_key *key);
-	void (*decode_key)(struct event_key *key, char decode[20]);
+	void (*decode_key)(struct perf_kvm *kvm, struct event_key *key,
+			   char decode[20]);
 	const char *name;
 };
 
+struct exit_reasons_table {
+	unsigned long exit_code;
+	const char *reason;
+};
+
+#define EVENTS_BITS		12
+#define EVENTS_CACHE_SIZE	(1UL << EVENTS_BITS)
+
+struct perf_kvm {
+	struct perf_tool    tool;
+	struct perf_session *session;
+
+	const char *file_name;
+	const char *report_event;
+	const char *sort_key;
+	int trace_vcpu;
+
+	struct exit_reasons_table *exit_reasons;
+	int exit_reasons_size;
+	const char *exit_reasons_isa;
+
+	struct kvm_events_ops *events_ops;
+	key_cmp_fun compare;
+	struct list_head kvm_events_cache[EVENTS_CACHE_SIZE];
+	u64 total_time;
+	u64 total_count;
+
+	struct rb_root result;
+};
+
+
 static void exit_event_get_key(struct perf_evsel *evsel,
 			       struct perf_sample *sample,
 			       struct event_key *key)
@@ -78,45 +138,35 @@
 	return kvm_entry_event(evsel);
 }
 
-struct exit_reasons_table {
-	unsigned long exit_code;
-	const char *reason;
-};
-
-struct exit_reasons_table vmx_exit_reasons[] = {
+static struct exit_reasons_table vmx_exit_reasons[] = {
 	VMX_EXIT_REASONS
 };
 
-struct exit_reasons_table svm_exit_reasons[] = {
+static struct exit_reasons_table svm_exit_reasons[] = {
 	SVM_EXIT_REASONS
 };
 
-static int cpu_isa;
-
-static const char *get_exit_reason(u64 exit_code)
+static const char *get_exit_reason(struct perf_kvm *kvm, u64 exit_code)
 {
-	int table_size = ARRAY_SIZE(svm_exit_reasons);
-	struct exit_reasons_table *table = svm_exit_reasons;
+	int i = kvm->exit_reasons_size;
+	struct exit_reasons_table *tbl = kvm->exit_reasons;
 
-	if (cpu_isa == 1) {
-		table = vmx_exit_reasons;
-		table_size = ARRAY_SIZE(vmx_exit_reasons);
-	}
-
-	while (table_size--) {
-		if (table->exit_code == exit_code)
-			return table->reason;
-		table++;
+	while (i--) {
+		if (tbl->exit_code == exit_code)
+			return tbl->reason;
+		tbl++;
 	}
 
 	pr_err("unknown kvm exit code:%lld on %s\n",
-		(unsigned long long)exit_code, cpu_isa ? "VMX" : "SVM");
+		(unsigned long long)exit_code, kvm->exit_reasons_isa);
 	return "UNKNOWN";
 }
 
-static void exit_event_decode_key(struct event_key *key, char decode[20])
+static void exit_event_decode_key(struct perf_kvm *kvm,
+				  struct event_key *key,
+				  char decode[20])
 {
-	const char *exit_reason = get_exit_reason(key->key);
+	const char *exit_reason = get_exit_reason(kvm, key->key);
 
 	scnprintf(decode, 20, "%s", exit_reason);
 }
@@ -128,11 +178,11 @@
 	.name = "VM-EXIT"
 };
 
-    /*
-     * For the mmio events, we treat:
-     * the time of MMIO write: kvm_mmio(KVM_TRACE_MMIO_WRITE...) -> kvm_entry
-     * the time of MMIO read: kvm_exit -> kvm_mmio(KVM_TRACE_MMIO_READ...).
-     */
+/*
+ * For the mmio events, we treat:
+ * the time of MMIO write: kvm_mmio(KVM_TRACE_MMIO_WRITE...) -> kvm_entry
+ * the time of MMIO read: kvm_exit -> kvm_mmio(KVM_TRACE_MMIO_READ...).
+ */
 static void mmio_event_get_key(struct perf_evsel *evsel, struct perf_sample *sample,
 			       struct event_key *key)
 {
@@ -178,7 +228,9 @@
 	return false;
 }
 
-static void mmio_event_decode_key(struct event_key *key, char decode[20])
+static void mmio_event_decode_key(struct perf_kvm *kvm __maybe_unused,
+				  struct event_key *key,
+				  char decode[20])
 {
 	scnprintf(decode, 20, "%#lx:%s", (unsigned long)key->key,
 				key->info == KVM_TRACE_MMIO_WRITE ? "W" : "R");
@@ -219,7 +271,9 @@
 	return kvm_entry_event(evsel);
 }
 
-static void ioport_event_decode_key(struct event_key *key, char decode[20])
+static void ioport_event_decode_key(struct perf_kvm *kvm __maybe_unused,
+				    struct event_key *key,
+				    char decode[20])
 {
 	scnprintf(decode, 20, "%#llx:%s", (unsigned long long)key->key,
 				key->info ? "POUT" : "PIN");
@@ -232,64 +286,37 @@
 	.name = "IO Port Access"
 };
 
-static const char *report_event = "vmexit";
-struct kvm_events_ops *events_ops;
-
-static bool register_kvm_events_ops(void)
+static bool register_kvm_events_ops(struct perf_kvm *kvm)
 {
 	bool ret = true;
 
-	if (!strcmp(report_event, "vmexit"))
-		events_ops = &exit_events;
-	else if (!strcmp(report_event, "mmio"))
-		events_ops = &mmio_events;
-	else if (!strcmp(report_event, "ioport"))
-		events_ops = &ioport_events;
+	if (!strcmp(kvm->report_event, "vmexit"))
+		kvm->events_ops = &exit_events;
+	else if (!strcmp(kvm->report_event, "mmio"))
+		kvm->events_ops = &mmio_events;
+	else if (!strcmp(kvm->report_event, "ioport"))
+		kvm->events_ops = &ioport_events;
 	else {
-		pr_err("Unknown report event:%s\n", report_event);
+		pr_err("Unknown report event:%s\n", kvm->report_event);
 		ret = false;
 	}
 
 	return ret;
 }
 
-struct kvm_event_stats {
-	u64 time;
-	struct stats stats;
-};
-
-struct kvm_event {
-	struct list_head hash_entry;
-	struct rb_node rb;
-
-	struct event_key key;
-
-	struct kvm_event_stats total;
-
-	#define DEFAULT_VCPU_NUM 8
-	int max_vcpu;
-	struct kvm_event_stats *vcpu;
-};
-
 struct vcpu_event_record {
 	int vcpu_id;
 	u64 start_time;
 	struct kvm_event *last_event;
 };
 
-#define EVENTS_BITS			12
-#define EVENTS_CACHE_SIZE	(1UL << EVENTS_BITS)
 
-static u64 total_time;
-static u64 total_count;
-static struct list_head kvm_events_cache[EVENTS_CACHE_SIZE];
-
-static void init_kvm_event_record(void)
+static void init_kvm_event_record(struct perf_kvm *kvm)
 {
 	int i;
 
 	for (i = 0; i < (int)EVENTS_CACHE_SIZE; i++)
-		INIT_LIST_HEAD(&kvm_events_cache[i]);
+		INIT_LIST_HEAD(&kvm->kvm_events_cache[i]);
 }
 
 static int kvm_events_hash_fn(u64 key)
@@ -333,14 +360,15 @@
 	return event;
 }
 
-static struct kvm_event *find_create_kvm_event(struct event_key *key)
+static struct kvm_event *find_create_kvm_event(struct perf_kvm *kvm,
+					       struct event_key *key)
 {
 	struct kvm_event *event;
 	struct list_head *head;
 
 	BUG_ON(key->key == INVALID_KEY);
 
-	head = &kvm_events_cache[kvm_events_hash_fn(key->key)];
+	head = &kvm->kvm_events_cache[kvm_events_hash_fn(key->key)];
 	list_for_each_entry(event, head, hash_entry)
 		if (event->key.key == key->key && event->key.info == key->info)
 			return event;
@@ -353,13 +381,14 @@
 	return event;
 }
 
-static bool handle_begin_event(struct vcpu_event_record *vcpu_record,
+static bool handle_begin_event(struct perf_kvm *kvm,
+			       struct vcpu_event_record *vcpu_record,
 			       struct event_key *key, u64 timestamp)
 {
 	struct kvm_event *event = NULL;
 
 	if (key->key != INVALID_KEY)
-		event = find_create_kvm_event(key);
+		event = find_create_kvm_event(kvm, key);
 
 	vcpu_record->last_event = event;
 	vcpu_record->start_time = timestamp;
@@ -396,8 +425,10 @@
 	return true;
 }
 
-static bool handle_end_event(struct vcpu_event_record *vcpu_record,
-			     struct event_key *key, u64 timestamp)
+static bool handle_end_event(struct perf_kvm *kvm,
+			     struct vcpu_event_record *vcpu_record,
+			     struct event_key *key,
+			     u64 timestamp)
 {
 	struct kvm_event *event;
 	u64 time_begin, time_diff;
@@ -419,7 +450,7 @@
 		return true;
 
 	if (!event)
-		event = find_create_kvm_event(key);
+		event = find_create_kvm_event(kvm, key);
 
 	if (!event)
 		return false;
@@ -455,7 +486,9 @@
 	return thread->priv;
 }
 
-static bool handle_kvm_event(struct thread *thread, struct perf_evsel *evsel,
+static bool handle_kvm_event(struct perf_kvm *kvm,
+			     struct thread *thread,
+			     struct perf_evsel *evsel,
 			     struct perf_sample *sample)
 {
 	struct vcpu_event_record *vcpu_record;
@@ -465,22 +498,15 @@
 	if (!vcpu_record)
 		return true;
 
-	if (events_ops->is_begin_event(evsel, sample, &key))
-		return handle_begin_event(vcpu_record, &key, sample->time);
+	if (kvm->events_ops->is_begin_event(evsel, sample, &key))
+		return handle_begin_event(kvm, vcpu_record, &key, sample->time);
 
-	if (events_ops->is_end_event(evsel, sample, &key))
-		return handle_end_event(vcpu_record, &key, sample->time);
+	if (kvm->events_ops->is_end_event(evsel, sample, &key))
+		return handle_end_event(kvm, vcpu_record, &key, sample->time);
 
 	return true;
 }
 
-typedef int (*key_cmp_fun)(struct kvm_event*, struct kvm_event*, int);
-struct kvm_event_key {
-	const char *name;
-	key_cmp_fun key;
-};
-
-static int trace_vcpu = -1;
 #define GET_EVENT_KEY(func, field)					\
 static u64 get_event_ ##func(struct kvm_event *event, int vcpu)		\
 {									\
@@ -515,29 +541,25 @@
 	{ NULL, NULL }
 };
 
-static const char *sort_key = "sample";
-static key_cmp_fun compare;
-
-static bool select_key(void)
+static bool select_key(struct perf_kvm *kvm)
 {
 	int i;
 
 	for (i = 0; keys[i].name; i++) {
-		if (!strcmp(keys[i].name, sort_key)) {
-			compare = keys[i].key;
+		if (!strcmp(keys[i].name, kvm->sort_key)) {
+			kvm->compare = keys[i].key;
 			return true;
 		}
 	}
 
-	pr_err("Unknown compare key:%s\n", sort_key);
+	pr_err("Unknown compare key:%s\n", kvm->sort_key);
 	return false;
 }
 
-static struct rb_root result;
-static void insert_to_result(struct kvm_event *event, key_cmp_fun bigger,
-			     int vcpu)
+static void insert_to_result(struct rb_root *result, struct kvm_event *event,
+			     key_cmp_fun bigger, int vcpu)
 {
-	struct rb_node **rb = &result.rb_node;
+	struct rb_node **rb = &result->rb_node;
 	struct rb_node *parent = NULL;
 	struct kvm_event *p;
 
@@ -552,13 +574,15 @@
 	}
 
 	rb_link_node(&event->rb, parent, rb);
-	rb_insert_color(&event->rb, &result);
+	rb_insert_color(&event->rb, result);
 }
 
-static void update_total_count(struct kvm_event *event, int vcpu)
+static void update_total_count(struct perf_kvm *kvm, struct kvm_event *event)
 {
-	total_count += get_event_count(event, vcpu);
-	total_time += get_event_time(event, vcpu);
+	int vcpu = kvm->trace_vcpu;
+
+	kvm->total_count += get_event_count(event, vcpu);
+	kvm->total_time += get_event_time(event, vcpu);
 }
 
 static bool event_is_valid(struct kvm_event *event, int vcpu)
@@ -566,28 +590,30 @@
 	return !!get_event_count(event, vcpu);
 }
 
-static void sort_result(int vcpu)
+static void sort_result(struct perf_kvm *kvm)
 {
 	unsigned int i;
+	int vcpu = kvm->trace_vcpu;
 	struct kvm_event *event;
 
 	for (i = 0; i < EVENTS_CACHE_SIZE; i++)
-		list_for_each_entry(event, &kvm_events_cache[i], hash_entry)
+		list_for_each_entry(event, &kvm->kvm_events_cache[i], hash_entry)
 			if (event_is_valid(event, vcpu)) {
-				update_total_count(event, vcpu);
-				insert_to_result(event, compare, vcpu);
+				update_total_count(kvm, event);
+				insert_to_result(&kvm->result, event,
+						 kvm->compare, vcpu);
 			}
 }
 
 /* returns left most element of result, and erase it */
-static struct kvm_event *pop_from_result(void)
+static struct kvm_event *pop_from_result(struct rb_root *result)
 {
-	struct rb_node *node = rb_first(&result);
+	struct rb_node *node = rb_first(result);
 
 	if (!node)
 		return NULL;
 
-	rb_erase(node, &result);
+	rb_erase(node, result);
 	return container_of(node, struct kvm_event, rb);
 }
 
@@ -601,14 +627,15 @@
 		pr_info("VCPU %d:\n\n", vcpu);
 }
 
-static void print_result(int vcpu)
+static void print_result(struct perf_kvm *kvm)
 {
 	char decode[20];
 	struct kvm_event *event;
+	int vcpu = kvm->trace_vcpu;
 
 	pr_info("\n\n");
 	print_vcpu_info(vcpu);
-	pr_info("%20s ", events_ops->name);
+	pr_info("%20s ", kvm->events_ops->name);
 	pr_info("%10s ", "Samples");
 	pr_info("%9s ", "Samples%");
 
@@ -616,33 +643,34 @@
 	pr_info("%16s ", "Avg time");
 	pr_info("\n\n");
 
-	while ((event = pop_from_result())) {
+	while ((event = pop_from_result(&kvm->result))) {
 		u64 ecount, etime;
 
 		ecount = get_event_count(event, vcpu);
 		etime = get_event_time(event, vcpu);
 
-		events_ops->decode_key(&event->key, decode);
+		kvm->events_ops->decode_key(kvm, &event->key, decode);
 		pr_info("%20s ", decode);
 		pr_info("%10llu ", (unsigned long long)ecount);
-		pr_info("%8.2f%% ", (double)ecount / total_count * 100);
-		pr_info("%8.2f%% ", (double)etime / total_time * 100);
+		pr_info("%8.2f%% ", (double)ecount / kvm->total_count * 100);
+		pr_info("%8.2f%% ", (double)etime / kvm->total_time * 100);
 		pr_info("%9.2fus ( +-%7.2f%% )", (double)etime / ecount/1e3,
 			kvm_event_rel_stddev(vcpu, event));
 		pr_info("\n");
 	}
 
 	pr_info("\nTotal Samples:%lld, Total events handled time:%.2fus.\n\n",
-		(unsigned long long)total_count, total_time / 1e3);
+		(unsigned long long)kvm->total_count, kvm->total_time / 1e3);
 }
 
-static int process_sample_event(struct perf_tool *tool __maybe_unused,
+static int process_sample_event(struct perf_tool *tool,
 				union perf_event *event,
 				struct perf_sample *sample,
 				struct perf_evsel *evsel,
 				struct machine *machine)
 {
 	struct thread *thread = machine__findnew_thread(machine, sample->tid);
+	struct perf_kvm *kvm = container_of(tool, struct perf_kvm, tool);
 
 	if (thread == NULL) {
 		pr_debug("problem processing %d event, skipping it.\n",
@@ -650,18 +678,12 @@
 		return -1;
 	}
 
-	if (!handle_kvm_event(thread, evsel, sample))
+	if (!handle_kvm_event(kvm, thread, evsel, sample))
 		return -1;
 
 	return 0;
 }
 
-static struct perf_tool eops = {
-	.sample			= process_sample_event,
-	.comm			= perf_event__process_comm,
-	.ordered_samples	= true,
-};
-
 static int get_cpu_isa(struct perf_session *session)
 {
 	char *cpuid = session->header.env.cpuid;
@@ -679,34 +701,43 @@
 	return isa;
 }
 
-static const char *file_name;
-
-static int read_events(void)
+static int read_events(struct perf_kvm *kvm)
 {
-	struct perf_session *kvm_session;
 	int ret;
 
-	kvm_session = perf_session__new(file_name, O_RDONLY, 0, false, &eops);
-	if (!kvm_session) {
+	struct perf_tool eops = {
+		.sample			= process_sample_event,
+		.comm			= perf_event__process_comm,
+		.ordered_samples	= true,
+	};
+
+	kvm->tool = eops;
+	kvm->session = perf_session__new(kvm->file_name, O_RDONLY, 0, false,
+					 &kvm->tool);
+	if (!kvm->session) {
 		pr_err("Initializing perf session failed\n");
 		return -EINVAL;
 	}
 
-	if (!perf_session__has_traces(kvm_session, "kvm record"))
+	if (!perf_session__has_traces(kvm->session, "kvm record"))
 		return -EINVAL;
 
 	/*
 	 * Do not use 'isa' recorded in kvm_exit tracepoint since it is not
 	 * traced in the old kernel.
 	 */
-	ret = get_cpu_isa(kvm_session);
+	ret = get_cpu_isa(kvm->session);
 
 	if (ret < 0)
 		return ret;
 
-	cpu_isa = ret;
+	if (ret == 1) {
+		kvm->exit_reasons = vmx_exit_reasons;
+		kvm->exit_reasons_size = ARRAY_SIZE(vmx_exit_reasons);
+		kvm->exit_reasons_isa = "VMX";
+	}
 
-	return perf_session__process_events(kvm_session, &eops);
+	return perf_session__process_events(kvm->session, &kvm->tool);
 }
 
 static bool verify_vcpu(int vcpu)
@@ -719,28 +750,30 @@
 	return true;
 }
 
-static int kvm_events_report_vcpu(int vcpu)
+static int kvm_events_report_vcpu(struct perf_kvm *kvm)
 {
 	int ret = -EINVAL;
+	int vcpu = kvm->trace_vcpu;
 
 	if (!verify_vcpu(vcpu))
 		goto exit;
 
-	if (!select_key())
+	if (!select_key(kvm))
 		goto exit;
 
-	if (!register_kvm_events_ops())
+	if (!register_kvm_events_ops(kvm))
 		goto exit;
 
-	init_kvm_event_record();
+	init_kvm_event_record(kvm);
 	setup_pager();
 
-	ret = read_events();
+	ret = read_events(kvm);
 	if (ret)
 		goto exit;
 
-	sort_result(vcpu);
-	print_result(vcpu);
+	sort_result(kvm);
+	print_result(kvm);
+
 exit:
 	return ret;
 }
@@ -765,7 +798,7 @@
 		_p;			\
 	})
 
-static int kvm_events_record(int argc, const char **argv)
+static int kvm_events_record(struct perf_kvm *kvm, int argc, const char **argv)
 {
 	unsigned int rec_argc, i, j;
 	const char **rec_argv;
@@ -780,7 +813,7 @@
 		rec_argv[i] = STRDUP_FAIL_EXIT(record_args[i]);
 
 	rec_argv[i++] = STRDUP_FAIL_EXIT("-o");
-	rec_argv[i++] = STRDUP_FAIL_EXIT(file_name);
+	rec_argv[i++] = STRDUP_FAIL_EXIT(kvm->file_name);
 
 	for (j = 1; j < (unsigned int)argc; j++, i++)
 		rec_argv[i] = argv[j];
@@ -788,24 +821,24 @@
 	return cmd_record(i, rec_argv, NULL);
 }
 
-static const char * const kvm_events_report_usage[] = {
-	"perf kvm stat report [<options>]",
-	NULL
-};
-
-static const struct option kvm_events_report_options[] = {
-	OPT_STRING(0, "event", &report_event, "report event",
-		    "event for reporting: vmexit, mmio, ioport"),
-	OPT_INTEGER(0, "vcpu", &trace_vcpu,
-		    "vcpu id to report"),
-	OPT_STRING('k', "key", &sort_key, "sort-key",
-		    "key for sorting: sample(sort by samples number)"
-		    " time (sort by avg time)"),
-	OPT_END()
-};
-
-static int kvm_events_report(int argc, const char **argv)
+static int kvm_events_report(struct perf_kvm *kvm, int argc, const char **argv)
 {
+	const struct option kvm_events_report_options[] = {
+		OPT_STRING(0, "event", &kvm->report_event, "report event",
+			    "event for reporting: vmexit, mmio, ioport"),
+		OPT_INTEGER(0, "vcpu", &kvm->trace_vcpu,
+			    "vcpu id to report"),
+		OPT_STRING('k', "key", &kvm->sort_key, "sort-key",
+			    "key for sorting: sample(sort by samples number)"
+			    " time (sort by avg time)"),
+		OPT_END()
+	};
+
+	const char * const kvm_events_report_usage[] = {
+		"perf kvm stat report [<options>]",
+		NULL
+	};
+
 	symbol__init();
 
 	if (argc) {
@@ -817,7 +850,7 @@
 					   kvm_events_report_options);
 	}
 
-	return kvm_events_report_vcpu(trace_vcpu);
+	return kvm_events_report_vcpu(kvm);
 }
 
 static void print_kvm_stat_usage(void)
@@ -831,7 +864,7 @@
 	printf("\nOtherwise, it is the alias of 'perf stat':\n");
 }
 
-static int kvm_cmd_stat(int argc, const char **argv)
+static int kvm_cmd_stat(struct perf_kvm *kvm, int argc, const char **argv)
 {
 	if (argc == 1) {
 		print_kvm_stat_usage();
@@ -839,44 +872,16 @@
 	}
 
 	if (!strncmp(argv[1], "rec", 3))
-		return kvm_events_record(argc - 1, argv + 1);
+		return kvm_events_record(kvm, argc - 1, argv + 1);
 
 	if (!strncmp(argv[1], "rep", 3))
-		return kvm_events_report(argc - 1 , argv + 1);
+		return kvm_events_report(kvm, argc - 1 , argv + 1);
 
 perf_stat:
 	return cmd_stat(argc, argv, NULL);
 }
 
-static char			name_buffer[256];
-
-static const char * const kvm_usage[] = {
-	"perf kvm [<options>] {top|record|report|diff|buildid-list|stat}",
-	NULL
-};
-
-static const struct option kvm_options[] = {
-	OPT_STRING('i', "input", &file_name, "file",
-		   "Input file name"),
-	OPT_STRING('o', "output", &file_name, "file",
-		   "Output file name"),
-	OPT_BOOLEAN(0, "guest", &perf_guest,
-		    "Collect guest os data"),
-	OPT_BOOLEAN(0, "host", &perf_host,
-		    "Collect host os data"),
-	OPT_STRING(0, "guestmount", &symbol_conf.guestmount, "directory",
-		   "guest mount directory under which every guest os"
-		   " instance has a subdir"),
-	OPT_STRING(0, "guestvmlinux", &symbol_conf.default_guest_vmlinux_name,
-		   "file", "file saving guest os vmlinux"),
-	OPT_STRING(0, "guestkallsyms", &symbol_conf.default_guest_kallsyms,
-		   "file", "file saving guest os /proc/kallsyms"),
-	OPT_STRING(0, "guestmodules", &symbol_conf.default_guest_modules,
-		   "file", "file saving guest os /proc/modules"),
-	OPT_END()
-};
-
-static int __cmd_record(int argc, const char **argv)
+static int __cmd_record(struct perf_kvm *kvm, int argc, const char **argv)
 {
 	int rec_argc, i = 0, j;
 	const char **rec_argv;
@@ -885,7 +890,7 @@
 	rec_argv = calloc(rec_argc + 1, sizeof(char *));
 	rec_argv[i++] = strdup("record");
 	rec_argv[i++] = strdup("-o");
-	rec_argv[i++] = strdup(file_name);
+	rec_argv[i++] = strdup(kvm->file_name);
 	for (j = 1; j < argc; j++, i++)
 		rec_argv[i] = argv[j];
 
@@ -894,7 +899,7 @@
 	return cmd_record(i, rec_argv, NULL);
 }
 
-static int __cmd_report(int argc, const char **argv)
+static int __cmd_report(struct perf_kvm *kvm, int argc, const char **argv)
 {
 	int rec_argc, i = 0, j;
 	const char **rec_argv;
@@ -903,7 +908,7 @@
 	rec_argv = calloc(rec_argc + 1, sizeof(char *));
 	rec_argv[i++] = strdup("report");
 	rec_argv[i++] = strdup("-i");
-	rec_argv[i++] = strdup(file_name);
+	rec_argv[i++] = strdup(kvm->file_name);
 	for (j = 1; j < argc; j++, i++)
 		rec_argv[i] = argv[j];
 
@@ -912,7 +917,7 @@
 	return cmd_report(i, rec_argv, NULL);
 }
 
-static int __cmd_buildid_list(int argc, const char **argv)
+static int __cmd_buildid_list(struct perf_kvm *kvm, int argc, const char **argv)
 {
 	int rec_argc, i = 0, j;
 	const char **rec_argv;
@@ -921,7 +926,7 @@
 	rec_argv = calloc(rec_argc + 1, sizeof(char *));
 	rec_argv[i++] = strdup("buildid-list");
 	rec_argv[i++] = strdup("-i");
-	rec_argv[i++] = strdup(file_name);
+	rec_argv[i++] = strdup(kvm->file_name);
 	for (j = 1; j < argc; j++, i++)
 		rec_argv[i] = argv[j];
 
@@ -932,6 +937,43 @@
 
 int cmd_kvm(int argc, const char **argv, const char *prefix __maybe_unused)
 {
+	struct perf_kvm kvm = {
+		.trace_vcpu	= -1,
+		.report_event	= "vmexit",
+		.sort_key	= "sample",
+
+		.exit_reasons = svm_exit_reasons,
+		.exit_reasons_size = ARRAY_SIZE(svm_exit_reasons),
+		.exit_reasons_isa = "SVM",
+	};
+
+	const struct option kvm_options[] = {
+		OPT_STRING('i', "input", &kvm.file_name, "file",
+			   "Input file name"),
+		OPT_STRING('o', "output", &kvm.file_name, "file",
+			   "Output file name"),
+		OPT_BOOLEAN(0, "guest", &perf_guest,
+			    "Collect guest os data"),
+		OPT_BOOLEAN(0, "host", &perf_host,
+			    "Collect host os data"),
+		OPT_STRING(0, "guestmount", &symbol_conf.guestmount, "directory",
+			   "guest mount directory under which every guest os"
+			   " instance has a subdir"),
+		OPT_STRING(0, "guestvmlinux", &symbol_conf.default_guest_vmlinux_name,
+			   "file", "file saving guest os vmlinux"),
+		OPT_STRING(0, "guestkallsyms", &symbol_conf.default_guest_kallsyms,
+			   "file", "file saving guest os /proc/kallsyms"),
+		OPT_STRING(0, "guestmodules", &symbol_conf.default_guest_modules,
+			   "file", "file saving guest os /proc/modules"),
+		OPT_END()
+	};
+
+
+	const char * const kvm_usage[] = {
+		"perf kvm [<options>] {top|record|report|diff|buildid-list|stat}",
+		NULL
+	};
+
 	perf_host  = 0;
 	perf_guest = 1;
 
@@ -943,28 +985,32 @@
 	if (!perf_host)
 		perf_guest = 1;
 
-	if (!file_name) {
+	if (!kvm.file_name) {
 		if (perf_host && !perf_guest)
-			sprintf(name_buffer, "perf.data.host");
+			kvm.file_name = strdup("perf.data.host");
 		else if (!perf_host && perf_guest)
-			sprintf(name_buffer, "perf.data.guest");
+			kvm.file_name = strdup("perf.data.guest");
 		else
-			sprintf(name_buffer, "perf.data.kvm");
-		file_name = name_buffer;
+			kvm.file_name = strdup("perf.data.kvm");
+
+		if (!kvm.file_name) {
+			pr_err("Failed to allocate memory for filename\n");
+			return -ENOMEM;
+		}
 	}
 
 	if (!strncmp(argv[0], "rec", 3))
-		return __cmd_record(argc, argv);
+		return __cmd_record(&kvm, argc, argv);
 	else if (!strncmp(argv[0], "rep", 3))
-		return __cmd_report(argc, argv);
+		return __cmd_report(&kvm, argc, argv);
 	else if (!strncmp(argv[0], "diff", 4))
 		return cmd_diff(argc, argv, NULL);
 	else if (!strncmp(argv[0], "top", 3))
 		return cmd_top(argc, argv, NULL);
 	else if (!strncmp(argv[0], "buildid-list", 12))
-		return __cmd_buildid_list(argc, argv);
+		return __cmd_buildid_list(&kvm, argc, argv);
 	else if (!strncmp(argv[0], "stat", 4))
-		return kvm_cmd_stat(argc, argv);
+		return kvm_cmd_stat(&kvm, argc, argv);
 	else
 		usage_with_options(kvm_usage, kvm_options);
 
diff --git a/tools/perf/builtin-lock.c b/tools/perf/builtin-lock.c
index 7d6e099..6f5f328 100644
--- a/tools/perf/builtin-lock.c
+++ b/tools/perf/builtin-lock.c
@@ -823,12 +823,6 @@
 	return 0;
 }
 
-static struct perf_tool eops = {
-	.sample			= process_sample_event,
-	.comm			= perf_event__process_comm,
-	.ordered_samples	= true,
-};
-
 static const struct perf_evsel_str_handler lock_tracepoints[] = {
 	{ "lock:lock_acquire",	 perf_evsel__process_lock_acquire,   }, /* CONFIG_LOCKDEP */
 	{ "lock:lock_acquired",	 perf_evsel__process_lock_acquired,  }, /* CONFIG_LOCKDEP, CONFIG_LOCK_STAT */
@@ -838,6 +832,11 @@
 
 static int read_events(void)
 {
+	struct perf_tool eops = {
+		.sample		 = process_sample_event,
+		.comm		 = perf_event__process_comm,
+		.ordered_samples = true,
+	};
 	session = perf_session__new(input_name, O_RDONLY, 0, false, &eops);
 	if (!session) {
 		pr_err("Initializing perf session failed\n");
@@ -878,53 +877,11 @@
 	return 0;
 }
 
-static const char * const report_usage[] = {
-	"perf lock report [<options>]",
-	NULL
-};
-
-static const struct option report_options[] = {
-	OPT_STRING('k', "key", &sort_key, "acquired",
-		    "key for sorting (acquired / contended / wait_total / wait_max / wait_min)"),
-	/* TODO: type */
-	OPT_END()
-};
-
-static const char * const info_usage[] = {
-	"perf lock info [<options>]",
-	NULL
-};
-
-static const struct option info_options[] = {
-	OPT_BOOLEAN('t', "threads", &info_threads,
-		    "dump thread list in perf.data"),
-	OPT_BOOLEAN('m', "map", &info_map,
-		    "map of lock instances (address:name table)"),
-	OPT_END()
-};
-
-static const char * const lock_usage[] = {
-	"perf lock [<options>] {record|report|script|info}",
-	NULL
-};
-
-static const struct option lock_options[] = {
-	OPT_STRING('i', "input", &input_name, "file", "input file name"),
-	OPT_INCR('v', "verbose", &verbose, "be more verbose (show symbol address, etc)"),
-	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace, "dump raw trace in ASCII"),
-	OPT_END()
-};
-
-static const char *record_args[] = {
-	"record",
-	"-R",
-	"-f",
-	"-m", "1024",
-	"-c", "1",
-};
-
 static int __cmd_record(int argc, const char **argv)
 {
+	const char *record_args[] = {
+		"record", "-R", "-f", "-m", "1024", "-c", "1",
+	};
 	unsigned int rec_argc, i, j;
 	const char **rec_argv;
 
@@ -963,6 +920,37 @@
 
 int cmd_lock(int argc, const char **argv, const char *prefix __maybe_unused)
 {
+	const struct option info_options[] = {
+	OPT_BOOLEAN('t', "threads", &info_threads,
+		    "dump thread list in perf.data"),
+	OPT_BOOLEAN('m', "map", &info_map,
+		    "map of lock instances (address:name table)"),
+	OPT_END()
+	};
+	const struct option lock_options[] = {
+	OPT_STRING('i', "input", &input_name, "file", "input file name"),
+	OPT_INCR('v', "verbose", &verbose, "be more verbose (show symbol address, etc)"),
+	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace, "dump raw trace in ASCII"),
+	OPT_END()
+	};
+	const struct option report_options[] = {
+	OPT_STRING('k', "key", &sort_key, "acquired",
+		    "key for sorting (acquired / contended / wait_total / wait_max / wait_min)"),
+	/* TODO: type */
+	OPT_END()
+	};
+	const char * const info_usage[] = {
+		"perf lock info [<options>]",
+		NULL
+	};
+	const char * const lock_usage[] = {
+		"perf lock [<options>] {record|report|script|info}",
+		NULL
+	};
+	const char * const report_usage[] = {
+		"perf lock report [<options>]",
+		NULL
+	};
 	unsigned int i;
 	int rc = 0;
 
diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c
index 118aa89..de38a03 100644
--- a/tools/perf/builtin-probe.c
+++ b/tools/perf/builtin-probe.c
@@ -250,19 +250,20 @@
 	return 0;
 }
 
-static const char * const probe_usage[] = {
-	"perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]",
-	"perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]",
-	"perf probe [<options>] --del '[GROUP:]EVENT' ...",
-	"perf probe --list",
+int cmd_probe(int argc, const char **argv, const char *prefix __maybe_unused)
+{
+	const char * const probe_usage[] = {
+		"perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]",
+		"perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]",
+		"perf probe [<options>] --del '[GROUP:]EVENT' ...",
+		"perf probe --list",
 #ifdef DWARF_SUPPORT
-	"perf probe [<options>] --line 'LINEDESC'",
-	"perf probe [<options>] --vars 'PROBEPOINT'",
+		"perf probe [<options>] --line 'LINEDESC'",
+		"perf probe [<options>] --vars 'PROBEPOINT'",
 #endif
-	NULL
+		NULL
 };
-
-static const struct option options[] = {
+	const struct option options[] = {
 	OPT_INCR('v', "verbose", &verbose,
 		    "be more verbose (show parsed arguments, etc)"),
 	OPT_BOOLEAN('l', "list", &params.list_events,
@@ -325,10 +326,7 @@
 	OPT_CALLBACK('x', "exec", NULL, "executable|path",
 			"target executable name or path", opt_set_target),
 	OPT_END()
-};
-
-int cmd_probe(int argc, const char **argv, const char *prefix __maybe_unused)
-{
+	};
 	int ret;
 
 	argc = parse_options(argc, argv, options, probe_usage,
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index f14cb5f..e9231659 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -31,15 +31,6 @@
 #include <sched.h>
 #include <sys/mman.h>
 
-#define CALLCHAIN_HELP "do call-graph (stack chain/backtrace) recording: "
-
-#ifdef NO_LIBUNWIND_SUPPORT
-static char callchain_help[] = CALLCHAIN_HELP "[fp]";
-#else
-static unsigned long default_stack_dump_size = 8192;
-static char callchain_help[] = CALLCHAIN_HELP "[fp] dwarf";
-#endif
-
 enum write_mode_t {
 	WRITE_FORCE,
 	WRITE_APPEND
@@ -800,7 +791,7 @@
 	return ret;
 }
 
-#ifndef NO_LIBUNWIND_SUPPORT
+#ifdef LIBUNWIND_SUPPORT
 static int get_stack_size(char *str, unsigned long *_size)
 {
 	char *endptr;
@@ -826,7 +817,7 @@
 	       max_size, str);
 	return -1;
 }
-#endif /* !NO_LIBUNWIND_SUPPORT */
+#endif /* LIBUNWIND_SUPPORT */
 
 static int
 parse_callchain_opt(const struct option *opt __maybe_unused, const char *arg,
@@ -865,9 +856,11 @@
 				       "needed for -g fp\n");
 			break;
 
-#ifndef NO_LIBUNWIND_SUPPORT
+#ifdef LIBUNWIND_SUPPORT
 		/* Dwarf style */
 		} else if (!strncmp(name, "dwarf", sizeof("dwarf"))) {
+			const unsigned long default_stack_dump_size = 8192;
+
 			ret = 0;
 			rec->opts.call_graph = CALLCHAIN_DWARF;
 			rec->opts.stack_dump_size = default_stack_dump_size;
@@ -883,7 +876,7 @@
 			if (!ret)
 				pr_debug("callchain: stack dump size %d\n",
 					 rec->opts.stack_dump_size);
-#endif /* !NO_LIBUNWIND_SUPPORT */
+#endif /* LIBUNWIND_SUPPORT */
 		} else {
 			pr_err("callchain: Unknown -g option "
 			       "value: %s\n", arg);
@@ -930,6 +923,14 @@
 	.file_new   = true,
 };
 
+#define CALLCHAIN_HELP "do call-graph (stack chain/backtrace) recording: "
+
+#ifdef LIBUNWIND_SUPPORT
+static const char callchain_help[] = CALLCHAIN_HELP "[fp] dwarf";
+#else
+static const char callchain_help[] = CALLCHAIN_HELP "[fp]";
+#endif
+
 /*
  * XXX Will stay a global variable till we fix builtin-script.c to stop messing
  * with it and switch to use the library functions in perf_evlist that came
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 1da243d..a61725d 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -320,7 +320,7 @@
 		const char *evname = perf_evsel__name(pos);
 
 		hists__fprintf_nr_sample_events(hists, evname, stdout);
-		hists__fprintf(hists, NULL, false, true, 0, 0, stdout);
+		hists__fprintf(hists, true, 0, 0, stdout);
 		fprintf(stdout, "\n\n");
 	}
 
@@ -691,7 +691,7 @@
 		setup_browser(true);
 	else {
 		use_browser = 0;
-		perf_hpp__init(false, false);
+		perf_hpp__init();
 	}
 
 	setup_sorting(report_usage, options);
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index 9b9e32e..3488ead 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -1426,7 +1426,7 @@
 						 struct perf_evsel *evsel,
 						 struct machine *machine)
 {
-	struct thread *thread = machine__findnew_thread(machine, sample->pid);
+	struct thread *thread = machine__findnew_thread(machine, sample->tid);
 	int err = 0;
 
 	if (thread == NULL) {
diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index 1be843a..fb96250 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -24,7 +24,6 @@
 static u64			nr_unordered;
 extern const struct option	record_options[];
 static bool			no_callchain;
-static bool			show_full_info;
 static bool			system_wide;
 static const char		*cpu_list;
 static DECLARE_BITMAP(cpu_bitmap, MAX_NR_CPUS);
@@ -473,8 +472,6 @@
 	return scripting_ops->stop_script();
 }
 
-static const char *input_name;
-
 static int process_sample_event(struct perf_tool *tool __maybe_unused,
 				union perf_event *event,
 				struct perf_sample *sample,
@@ -1156,62 +1153,6 @@
 	return n_args;
 }
 
-static const char * const script_usage[] = {
-	"perf script [<options>]",
-	"perf script [<options>] record <script> [<record-options>] <command>",
-	"perf script [<options>] report <script> [script-args]",
-	"perf script [<options>] <script> [<record-options>] <command>",
-	"perf script [<options>] <top-script> [script-args]",
-	NULL
-};
-
-static const struct option options[] = {
-	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
-		    "dump raw trace in ASCII"),
-	OPT_INCR('v', "verbose", &verbose,
-		    "be more verbose (show symbol address, etc)"),
-	OPT_BOOLEAN('L', "Latency", &latency_format,
-		    "show latency attributes (irqs/preemption disabled, etc)"),
-	OPT_CALLBACK_NOOPT('l', "list", NULL, NULL, "list available scripts",
-			   list_available_scripts),
-	OPT_CALLBACK('s', "script", NULL, "name",
-		     "script file name (lang:script name, script name, or *)",
-		     parse_scriptname),
-	OPT_STRING('g', "gen-script", &generate_script_lang, "lang",
-		   "generate perf-script.xx script in specified language"),
-	OPT_STRING('i', "input", &input_name, "file",
-		    "input file name"),
-	OPT_BOOLEAN('d', "debug-mode", &debug_mode,
-		   "do various checks like samples ordering and lost events"),
-	OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
-		   "file", "vmlinux pathname"),
-	OPT_STRING(0, "kallsyms", &symbol_conf.kallsyms_name,
-		   "file", "kallsyms pathname"),
-	OPT_BOOLEAN('G', "hide-call-graph", &no_callchain,
-		    "When printing symbols do not display call chain"),
-	OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory",
-		    "Look for files with symbols relative to this directory"),
-	OPT_CALLBACK('f', "fields", NULL, "str",
-		     "comma separated output fields prepend with 'type:'. "
-		     "Valid types: hw,sw,trace,raw. "
-		     "Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso,"
-		     "addr,symoff",
-		     parse_output_fields),
-	OPT_BOOLEAN('a', "all-cpus", &system_wide,
-		     "system-wide collection from all CPUs"),
-	OPT_STRING('S', "symbols", &symbol_conf.sym_list_str, "symbol[,symbol...]",
-		   "only consider these symbols"),
-	OPT_STRING('C', "cpu", &cpu_list, "cpu", "list of cpus to profile"),
-	OPT_STRING('c', "comms", &symbol_conf.comm_list_str, "comm[,comm...]",
-		   "only display events for these comms"),
-	OPT_BOOLEAN('I', "show-info", &show_full_info,
-		    "display extended information from perf.data file"),
-	OPT_BOOLEAN('\0', "show-kernel-path", &symbol_conf.show_kernel_path,
-		    "Show the path of [kernel.kallsyms]"),
-
-	OPT_END()
-};
-
 static int have_cmd(int argc, const char **argv)
 {
 	char **__argv = malloc(sizeof(const char *) * argc);
@@ -1233,12 +1174,65 @@
 
 int cmd_script(int argc, const char **argv, const char *prefix __maybe_unused)
 {
+	bool show_full_info = false;
+	const char *input_name = NULL;
 	char *rec_script_path = NULL;
 	char *rep_script_path = NULL;
 	struct perf_session *session;
 	char *script_path = NULL;
 	const char **__argv;
 	int i, j, err;
+	const struct option options[] = {
+	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
+		    "dump raw trace in ASCII"),
+	OPT_INCR('v', "verbose", &verbose,
+		 "be more verbose (show symbol address, etc)"),
+	OPT_BOOLEAN('L', "Latency", &latency_format,
+		    "show latency attributes (irqs/preemption disabled, etc)"),
+	OPT_CALLBACK_NOOPT('l', "list", NULL, NULL, "list available scripts",
+			   list_available_scripts),
+	OPT_CALLBACK('s', "script", NULL, "name",
+		     "script file name (lang:script name, script name, or *)",
+		     parse_scriptname),
+	OPT_STRING('g', "gen-script", &generate_script_lang, "lang",
+		   "generate perf-script.xx script in specified language"),
+	OPT_STRING('i', "input", &input_name, "file", "input file name"),
+	OPT_BOOLEAN('d', "debug-mode", &debug_mode,
+		   "do various checks like samples ordering and lost events"),
+	OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
+		   "file", "vmlinux pathname"),
+	OPT_STRING(0, "kallsyms", &symbol_conf.kallsyms_name,
+		   "file", "kallsyms pathname"),
+	OPT_BOOLEAN('G', "hide-call-graph", &no_callchain,
+		    "When printing symbols do not display call chain"),
+	OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory",
+		    "Look for files with symbols relative to this directory"),
+	OPT_CALLBACK('f', "fields", NULL, "str",
+		     "comma separated output fields prepend with 'type:'. "
+		     "Valid types: hw,sw,trace,raw. "
+		     "Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso,"
+		     "addr,symoff", parse_output_fields),
+	OPT_BOOLEAN('a', "all-cpus", &system_wide,
+		    "system-wide collection from all CPUs"),
+	OPT_STRING('S', "symbols", &symbol_conf.sym_list_str, "symbol[,symbol...]",
+		   "only consider these symbols"),
+	OPT_STRING('C', "cpu", &cpu_list, "cpu", "list of cpus to profile"),
+	OPT_STRING('c', "comms", &symbol_conf.comm_list_str, "comm[,comm...]",
+		   "only display events for these comms"),
+	OPT_BOOLEAN('I', "show-info", &show_full_info,
+		    "display extended information from perf.data file"),
+	OPT_BOOLEAN('\0', "show-kernel-path", &symbol_conf.show_kernel_path,
+		    "Show the path of [kernel.kallsyms]"),
+	OPT_END()
+	};
+	const char * const script_usage[] = {
+		"perf script [<options>]",
+		"perf script [<options>] record <script> [<record-options>] <command>",
+		"perf script [<options>] report <script> [script-args]",
+		"perf script [<options>] <script> [<record-options>] <command>",
+		"perf script [<options>] <top-script> [script-args]",
+		NULL
+	};
 
 	setup_scripting();
 
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index e8cd4d8..93b9011 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -64,122 +64,12 @@
 #define CNTR_NOT_SUPPORTED	"<not supported>"
 #define CNTR_NOT_COUNTED	"<not counted>"
 
-static struct perf_event_attr default_attrs[] = {
-
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK		},
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES	},
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS		},
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS		},
-
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES		},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_STALLED_CYCLES_BACKEND	},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS		},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS	},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES		},
-
-};
-
-/*
- * Detailed stats (-d), covering the L1 and last level data caches:
- */
-static struct perf_event_attr detailed_attrs[] = {
-
-  { .type = PERF_TYPE_HW_CACHE,
-    .config =
-	 PERF_COUNT_HW_CACHE_L1D		<<  0  |
-	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
-	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
-
-  { .type = PERF_TYPE_HW_CACHE,
-    .config =
-	 PERF_COUNT_HW_CACHE_L1D		<<  0  |
-	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
-	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
-
-  { .type = PERF_TYPE_HW_CACHE,
-    .config =
-	 PERF_COUNT_HW_CACHE_LL			<<  0  |
-	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
-	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
-
-  { .type = PERF_TYPE_HW_CACHE,
-    .config =
-	 PERF_COUNT_HW_CACHE_LL			<<  0  |
-	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
-	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
-};
-
-/*
- * Very detailed stats (-d -d), covering the instruction cache and the TLB caches:
- */
-static struct perf_event_attr very_detailed_attrs[] = {
-
-  { .type = PERF_TYPE_HW_CACHE,
-    .config =
-	 PERF_COUNT_HW_CACHE_L1I		<<  0  |
-	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
-	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
-
-  { .type = PERF_TYPE_HW_CACHE,
-    .config =
-	 PERF_COUNT_HW_CACHE_L1I		<<  0  |
-	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
-	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
-
-  { .type = PERF_TYPE_HW_CACHE,
-    .config =
-	 PERF_COUNT_HW_CACHE_DTLB		<<  0  |
-	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
-	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
-
-  { .type = PERF_TYPE_HW_CACHE,
-    .config =
-	 PERF_COUNT_HW_CACHE_DTLB		<<  0  |
-	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
-	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
-
-  { .type = PERF_TYPE_HW_CACHE,
-    .config =
-	 PERF_COUNT_HW_CACHE_ITLB		<<  0  |
-	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
-	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
-
-  { .type = PERF_TYPE_HW_CACHE,
-    .config =
-	 PERF_COUNT_HW_CACHE_ITLB		<<  0  |
-	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
-	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
-
-};
-
-/*
- * Very, very detailed stats (-d -d -d), adding prefetch events:
- */
-static struct perf_event_attr very_very_detailed_attrs[] = {
-
-  { .type = PERF_TYPE_HW_CACHE,
-    .config =
-	 PERF_COUNT_HW_CACHE_L1D		<<  0  |
-	(PERF_COUNT_HW_CACHE_OP_PREFETCH	<<  8) |
-	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
-
-  { .type = PERF_TYPE_HW_CACHE,
-    .config =
-	 PERF_COUNT_HW_CACHE_L1D		<<  0  |
-	(PERF_COUNT_HW_CACHE_OP_PREFETCH	<<  8) |
-	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
-};
-
-
-
 static struct perf_evlist	*evsel_list;
 
 static struct perf_target	target = {
 	.uid	= UINT_MAX,
 };
 
-static int			run_idx				=  0;
 static int			run_count			=  1;
 static bool			no_inherit			= false;
 static bool			scale				=  true;
@@ -187,15 +77,12 @@
 static pid_t			child_pid			= -1;
 static bool			null_run			=  false;
 static int			detailed_run			=  0;
-static bool			sync_run			=  false;
 static bool			big_num				=  true;
 static int			big_num_opt			=  -1;
 static const char		*csv_sep			= NULL;
 static bool			csv_output			= false;
 static bool			group				= false;
-static const char		*output_name			= NULL;
 static FILE			*output				= NULL;
-static int			output_fd;
 
 static volatile int done = 0;
 
@@ -1028,11 +915,6 @@
 	kill(getpid(), signr);
 }
 
-static const char * const stat_usage[] = {
-	"perf stat [<options>] [<command>]",
-	NULL
-};
-
 static int stat__set_big_num(const struct option *opt __maybe_unused,
 			     const char *s __maybe_unused, int unset)
 {
@@ -1040,62 +922,119 @@
 	return 0;
 }
 
-static bool append_file;
-
-static const struct option options[] = {
-	OPT_CALLBACK('e', "event", &evsel_list, "event",
-		     "event selector. use 'perf list' to list available events",
-		     parse_events_option),
-	OPT_CALLBACK(0, "filter", &evsel_list, "filter",
-		     "event filter", parse_filter),
-	OPT_BOOLEAN('i', "no-inherit", &no_inherit,
-		    "child tasks do not inherit counters"),
-	OPT_STRING('p', "pid", &target.pid, "pid",
-		   "stat events on existing process id"),
-	OPT_STRING('t', "tid", &target.tid, "tid",
-		   "stat events on existing thread id"),
-	OPT_BOOLEAN('a', "all-cpus", &target.system_wide,
-		    "system-wide collection from all CPUs"),
-	OPT_BOOLEAN('g', "group", &group,
-		    "put the counters into a counter group"),
-	OPT_BOOLEAN('c', "scale", &scale,
-		    "scale/normalize counters"),
-	OPT_INCR('v', "verbose", &verbose,
-		    "be more verbose (show counter open errors, etc)"),
-	OPT_INTEGER('r', "repeat", &run_count,
-		    "repeat command and print average + stddev (max: 100)"),
-	OPT_BOOLEAN('n', "null", &null_run,
-		    "null run - dont start any counters"),
-	OPT_INCR('d', "detailed", &detailed_run,
-		    "detailed run - start a lot of events"),
-	OPT_BOOLEAN('S', "sync", &sync_run,
-		    "call sync() before starting a run"),
-	OPT_CALLBACK_NOOPT('B', "big-num", NULL, NULL, 
-			   "print large numbers with thousands\' separators",
-			   stat__set_big_num),
-	OPT_STRING('C', "cpu", &target.cpu_list, "cpu",
-		    "list of cpus to monitor in system-wide"),
-	OPT_BOOLEAN('A', "no-aggr", &no_aggr,
-		    "disable CPU count aggregation"),
-	OPT_STRING('x', "field-separator", &csv_sep, "separator",
-		   "print counts with custom separator"),
-	OPT_CALLBACK('G', "cgroup", &evsel_list, "name",
-		     "monitor event in cgroup name only",
-		     parse_cgroups),
-	OPT_STRING('o', "output", &output_name, "file",
-		    "output file name"),
-	OPT_BOOLEAN(0, "append", &append_file, "append to the output file"),
-	OPT_INTEGER(0, "log-fd", &output_fd,
-		    "log output to fd, instead of stderr"),
-	OPT_END()
-};
-
 /*
  * Add default attributes, if there were no attributes specified or
  * if -d/--detailed, -d -d or -d -d -d is used:
  */
 static int add_default_attributes(void)
 {
+	struct perf_event_attr default_attrs[] = {
+
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK		},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES	},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS		},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS		},
+
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES		},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_STALLED_CYCLES_FRONTEND	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_STALLED_CYCLES_BACKEND	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS		},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES		},
+
+};
+
+/*
+ * Detailed stats (-d), covering the L1 and last level data caches:
+ */
+	struct perf_event_attr detailed_attrs[] = {
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_L1D		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_L1D		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_LL			<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_LL			<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
+};
+
+/*
+ * Very detailed stats (-d -d), covering the instruction cache and the TLB caches:
+ */
+	struct perf_event_attr very_detailed_attrs[] = {
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_L1I		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_L1I		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_DTLB		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_DTLB		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_ITLB		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_ITLB		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_READ		<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
+
+};
+
+/*
+ * Very, very detailed stats (-d -d -d), adding prefetch events:
+ */
+	struct perf_event_attr very_very_detailed_attrs[] = {
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_L1D		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_PREFETCH	<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_ACCESS	<< 16)				},
+
+  { .type = PERF_TYPE_HW_CACHE,
+    .config =
+	 PERF_COUNT_HW_CACHE_L1D		<<  0  |
+	(PERF_COUNT_HW_CACHE_OP_PREFETCH	<<  8) |
+	(PERF_COUNT_HW_CACHE_RESULT_MISS	<< 16)				},
+};
+
 	/* Set attrs if no event is selected and !null_run: */
 	if (null_run)
 		return 0;
@@ -1130,8 +1069,59 @@
 
 int cmd_stat(int argc, const char **argv, const char *prefix __maybe_unused)
 {
+	bool append_file = false,
+	     sync_run = false;
+	int output_fd = 0;
+	const char *output_name	= NULL;
+	const struct option options[] = {
+	OPT_CALLBACK('e', "event", &evsel_list, "event",
+		     "event selector. use 'perf list' to list available events",
+		     parse_events_option),
+	OPT_CALLBACK(0, "filter", &evsel_list, "filter",
+		     "event filter", parse_filter),
+	OPT_BOOLEAN('i', "no-inherit", &no_inherit,
+		    "child tasks do not inherit counters"),
+	OPT_STRING('p', "pid", &target.pid, "pid",
+		   "stat events on existing process id"),
+	OPT_STRING('t', "tid", &target.tid, "tid",
+		   "stat events on existing thread id"),
+	OPT_BOOLEAN('a', "all-cpus", &target.system_wide,
+		    "system-wide collection from all CPUs"),
+	OPT_BOOLEAN('g', "group", &group,
+		    "put the counters into a counter group"),
+	OPT_BOOLEAN('c', "scale", &scale, "scale/normalize counters"),
+	OPT_INCR('v', "verbose", &verbose,
+		    "be more verbose (show counter open errors, etc)"),
+	OPT_INTEGER('r', "repeat", &run_count,
+		    "repeat command and print average + stddev (max: 100)"),
+	OPT_BOOLEAN('n', "null", &null_run,
+		    "null run - dont start any counters"),
+	OPT_INCR('d', "detailed", &detailed_run,
+		    "detailed run - start a lot of events"),
+	OPT_BOOLEAN('S', "sync", &sync_run,
+		    "call sync() before starting a run"),
+	OPT_CALLBACK_NOOPT('B', "big-num", NULL, NULL, 
+			   "print large numbers with thousands\' separators",
+			   stat__set_big_num),
+	OPT_STRING('C', "cpu", &target.cpu_list, "cpu",
+		    "list of cpus to monitor in system-wide"),
+	OPT_BOOLEAN('A', "no-aggr", &no_aggr, "disable CPU count aggregation"),
+	OPT_STRING('x', "field-separator", &csv_sep, "separator",
+		   "print counts with custom separator"),
+	OPT_CALLBACK('G', "cgroup", &evsel_list, "name",
+		     "monitor event in cgroup name only", parse_cgroups),
+	OPT_STRING('o', "output", &output_name, "file", "output file name"),
+	OPT_BOOLEAN(0, "append", &append_file, "append to the output file"),
+	OPT_INTEGER(0, "log-fd", &output_fd,
+		    "log output to fd, instead of stderr"),
+	OPT_END()
+	};
+	const char * const stat_usage[] = {
+		"perf stat [<options>] [<command>]",
+		NULL
+	};
 	struct perf_evsel *pos;
-	int status = -ENOMEM;
+	int status = -ENOMEM, run_idx;
 	const char *mode;
 
 	setlocale(LC_ALL, "");
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index b1a8a3b..f251b61 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -38,9 +38,6 @@
 #define PWR_EVENT_EXIT -1
 
 
-static const char	*input_name;
-static const char	*output_name = "output.svg";
-
 static unsigned int	numcpus;
 static u64		min_freq;	/* Lowest CPU frequency seen */
 static u64		max_freq;	/* Highest CPU frequency seen */
@@ -968,16 +965,15 @@
 	svg_close();
 }
 
-static struct perf_tool perf_timechart = {
-	.comm			= process_comm_event,
-	.fork			= process_fork_event,
-	.exit			= process_exit_event,
-	.sample			= process_sample_event,
-	.ordered_samples	= true,
-};
-
-static int __cmd_timechart(void)
+static int __cmd_timechart(const char *input_name, const char *output_name)
 {
+	struct perf_tool perf_timechart = {
+		.comm		 = process_comm_event,
+		.fork		 = process_fork_event,
+		.exit		 = process_exit_event,
+		.sample		 = process_sample_event,
+		.ordered_samples = true,
+	};
 	struct perf_session *session = perf_session__new(input_name, O_RDONLY,
 							 0, false, &perf_timechart);
 	int ret = -EINVAL;
@@ -1005,40 +1001,25 @@
 	return ret;
 }
 
-static const char * const timechart_usage[] = {
-	"perf timechart [<options>] {record}",
-	NULL
-};
-
-#ifdef SUPPORT_OLD_POWER_EVENTS
-static const char * const record_old_args[] = {
-	"record",
-	"-a",
-	"-R",
-	"-f",
-	"-c", "1",
-	"-e", "power:power_start",
-	"-e", "power:power_end",
-	"-e", "power:power_frequency",
-	"-e", "sched:sched_wakeup",
-	"-e", "sched:sched_switch",
-};
-#endif
-
-static const char * const record_new_args[] = {
-	"record",
-	"-a",
-	"-R",
-	"-f",
-	"-c", "1",
-	"-e", "power:cpu_frequency",
-	"-e", "power:cpu_idle",
-	"-e", "sched:sched_wakeup",
-	"-e", "sched:sched_switch",
-};
-
 static int __cmd_record(int argc, const char **argv)
 {
+#ifdef SUPPORT_OLD_POWER_EVENTS
+	const char * const record_old_args[] = {
+		"record", "-a", "-R", "-f", "-c", "1",
+		"-e", "power:power_start",
+		"-e", "power:power_end",
+		"-e", "power:power_frequency",
+		"-e", "sched:sched_wakeup",
+		"-e", "sched:sched_switch",
+	};
+#endif
+	const char * const record_new_args[] = {
+		"record", "-a", "-R", "-f", "-c", "1",
+		"-e", "power:cpu_frequency",
+		"-e", "power:cpu_idle",
+		"-e", "sched:sched_wakeup",
+		"-e", "sched:sched_switch",
+	};
 	unsigned int rec_argc, i, j;
 	const char **rec_argv;
 	const char * const *record_args = record_new_args;
@@ -1077,27 +1058,28 @@
 	return 0;
 }
 
-static const struct option options[] = {
-	OPT_STRING('i', "input", &input_name, "file",
-		    "input file name"),
-	OPT_STRING('o', "output", &output_name, "file",
-		    "output file name"),
-	OPT_INTEGER('w', "width", &svg_page_width,
-		    "page width"),
-	OPT_BOOLEAN('P', "power-only", &power_only,
-		    "output power data only"),
+int cmd_timechart(int argc, const char **argv,
+		  const char *prefix __maybe_unused)
+{
+	const char *input_name;
+	const char *output_name = "output.svg";
+	const struct option options[] = {
+	OPT_STRING('i', "input", &input_name, "file", "input file name"),
+	OPT_STRING('o', "output", &output_name, "file", "output file name"),
+	OPT_INTEGER('w', "width", &svg_page_width, "page width"),
+	OPT_BOOLEAN('P', "power-only", &power_only, "output power data only"),
 	OPT_CALLBACK('p', "process", NULL, "process",
 		      "process selector. Pass a pid or process name.",
 		       parse_process),
 	OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory",
 		    "Look for files with symbols relative to this directory"),
 	OPT_END()
-};
+	};
+	const char * const timechart_usage[] = {
+		"perf timechart [<options>] {record}",
+		NULL
+	};
 
-
-int cmd_timechart(int argc, const char **argv,
-		  const char *prefix __maybe_unused)
-{
 	argc = parse_options(argc, argv, options, timechart_usage,
 			PARSE_OPT_STOP_AT_NON_OPTION);
 
@@ -1110,5 +1092,5 @@
 
 	setup_pager();
 
-	return __cmd_timechart();
+	return __cmd_timechart(input_name, output_name);
 }
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index e434a16..ff6db80 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -316,7 +316,7 @@
 	hists__output_recalc_col_len(&top->sym_evsel->hists,
 				     top->winsize.ws_row - 3);
 	putchar('\n');
-	hists__fprintf(&top->sym_evsel->hists, NULL, false, false,
+	hists__fprintf(&top->sym_evsel->hists, false,
 		       top->winsize.ws_row - 4 - printed, win_width, stdout);
 }
 
@@ -1159,11 +1159,6 @@
 	return 0;
 }
 
-static const char * const top_usage[] = {
-	"perf top [<options>]",
-	NULL
-};
-
 int cmd_top(int argc, const char **argv, const char *prefix __maybe_unused)
 {
 	struct perf_evsel *pos;
@@ -1250,6 +1245,10 @@
 	OPT_STRING('u', "uid", &top.target.uid_str, "user", "user to profile"),
 	OPT_END()
 	};
+	const char * const top_usage[] = {
+		"perf top [<options>]",
+		NULL
+	};
 
 	top.evlist = perf_evlist__new(NULL, NULL);
 	if (top.evlist == NULL)
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 8f113da..dec8ced 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -114,10 +114,85 @@
 	return printed;
 }
 
+typedef int (*tracepoint_handler)(struct trace *trace, struct perf_evsel *evsel,
+				  struct perf_sample *sample);
+
+static struct syscall *trace__syscall_info(struct trace *trace,
+					   struct perf_evsel *evsel,
+					   struct perf_sample *sample)
+{
+	int id = perf_evsel__intval(evsel, sample, "id");
+
+	if (id < 0) {
+		printf("Invalid syscall %d id, skipping...\n", id);
+		return NULL;
+	}
+
+	if ((id > trace->syscalls.max || trace->syscalls.table[id].name == NULL) &&
+	    trace__read_syscall_info(trace, id))
+		goto out_cant_read;
+
+	if ((id > trace->syscalls.max || trace->syscalls.table[id].name == NULL))
+		goto out_cant_read;
+
+	return &trace->syscalls.table[id];
+
+out_cant_read:
+	printf("Problems reading syscall %d information\n", id);
+	return NULL;
+}
+
+static int trace__sys_enter(struct trace *trace, struct perf_evsel *evsel,
+			    struct perf_sample *sample)
+{
+	void *args;
+	struct syscall *sc = trace__syscall_info(trace, evsel, sample);
+
+	if (sc == NULL)
+		return -1;
+
+	args = perf_evsel__rawptr(evsel, sample, "args");
+	if (args == NULL) {
+		printf("Problems reading syscall arguments\n");
+		return -1;
+	}
+
+	printf("%s(", sc->name);
+	syscall__fprintf_args(sc, args, stdout);
+
+	return 0;
+}
+
+static int trace__sys_exit(struct trace *trace, struct perf_evsel *evsel,
+			   struct perf_sample *sample)
+{
+	int ret;
+	struct syscall *sc = trace__syscall_info(trace, evsel, sample);
+
+	if (sc == NULL)
+		return -1;
+
+	ret = perf_evsel__intval(evsel, sample, "ret");
+
+	if (ret < 0 && sc->fmt && sc->fmt->errmsg) {
+		char bf[256];
+		const char *emsg = strerror_r(-ret, bf, sizeof(bf)),
+			   *e = audit_errno_to_name(-ret);
+
+		printf(") = -1 %s %s", e, emsg);
+	} else if (ret == 0 && sc->fmt && sc->fmt->timeout)
+		printf(") = 0 Timeout");
+	else
+		printf(") = %d", ret);
+
+	putchar('\n');
+	return 0;
+}
+
 static int trace__run(struct trace *trace)
 {
 	struct perf_evlist *evlist = perf_evlist__new(NULL, NULL);
-	struct perf_evsel *evsel, *evsel_enter, *evsel_exit;
+	struct perf_evsel *evsel;
 	int err = -1, i, nr_events = 0, before;
 
 	if (evlist == NULL) {
@@ -125,22 +200,12 @@
 		goto out;
 	}
 
-	evsel_enter = perf_evsel__newtp("raw_syscalls", "sys_enter", 0);
-	if (evsel_enter == NULL) {
-		printf("Couldn't read the raw_syscalls:sys_enter tracepoint information!\n");
+	if (perf_evlist__add_newtp(evlist, "raw_syscalls", "sys_enter", trace__sys_enter) ||
+	    perf_evlist__add_newtp(evlist, "raw_syscalls", "sys_exit", trace__sys_exit)) {
+		printf("Couldn't read the raw_syscalls tracepoints information!\n");
 		goto out_delete_evlist;
 	}
 
-	perf_evlist__add(evlist, evsel_enter);
-
-	evsel_exit = perf_evsel__newtp("raw_syscalls", "sys_exit", 1);
-	if (evsel_exit == NULL) {
-		printf("Couldn't read the raw_syscalls:sys_exit tracepoint information!\n");
-		goto out_delete_evlist;
-	}
-
-	perf_evlist__add(evlist, evsel_exit);
-
 	err = perf_evlist__create_maps(evlist, &trace->opts.target);
 	if (err < 0) {
 		printf("Problems parsing the target to trace, check your options!\n");
@@ -170,9 +235,8 @@
 
 		while ((event = perf_evlist__mmap_read(evlist, i)) != NULL) {
 			const u32 type = event->header.type;
-			struct syscall *sc;
+			tracepoint_handler handler;
 			struct perf_sample sample;
-			int id;
 
 			++nr_events;
 
@@ -200,45 +264,11 @@
 				continue;
 			}
 
-			id = perf_evsel__intval(evsel, &sample, "id");
-			if (id < 0) {
-				printf("Invalid syscall %d id, skipping...\n", id);
-				continue;
-			}
-
-			if ((id > trace->syscalls.max || trace->syscalls.table[id].name == NULL) &&
-			    trace__read_syscall_info(trace, id))
-				continue;
-
-			if ((id > trace->syscalls.max || trace->syscalls.table[id].name == NULL))
-				continue;
-
-			sc = &trace->syscalls.table[id];
-
 			if (evlist->threads->map[0] == -1 || evlist->threads->nr > 1)
 				printf("%d ", sample.tid);
 
-			if (evsel == evsel_enter) {
-				void *args = perf_evsel__rawptr(evsel, &sample, "args");
-
-				printf("%s(", sc->name);
-				syscall__fprintf_args(sc, args, stdout);
-			} else if (evsel == evsel_exit) {
-				int ret = perf_evsel__intval(evsel, &sample, "ret");
-
-				if (ret < 0 && sc->fmt && sc->fmt->errmsg) {
-					char bf[256];
-					const char *emsg = strerror_r(-ret, bf, sizeof(bf)),
-						   *e = audit_errno_to_name(-ret);
-
-					printf(") = -1 %s %s", e, emsg);
-				} else if (ret == 0 && sc->fmt && sc->fmt->timeout)
-					printf(") = 0 Timeout");
-				else
-					printf(") = %d", ret);
-
-				putchar('\n');
-			}
+			handler = evsel->handler.func;
+			handler(trace, evsel, &sample);
 		}
 	}
 
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index fc2f770..6d50eb0 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -48,14 +48,14 @@
 	{ "version",	cmd_version,	0 },
 	{ "script",	cmd_script,	0 },
 	{ "sched",	cmd_sched,	0 },
-#ifndef NO_LIBELF_SUPPORT
+#ifdef LIBELF_SUPPORT
 	{ "probe",	cmd_probe,	0 },
 #endif
 	{ "kmem",	cmd_kmem,	0 },
 	{ "lock",	cmd_lock,	0 },
 	{ "kvm",	cmd_kvm,	0 },
 	{ "test",	cmd_test,	0 },
-#ifndef NO_LIBAUDIT_SUPPORT
+#ifdef LIBAUDIT_SUPPORT
 	{ "trace",	cmd_trace,	0 },
 #endif
 	{ "inject",	cmd_inject,	0 },
diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c
index a21f40b..0568536 100644
--- a/tools/perf/ui/browsers/hists.c
+++ b/tools/perf/ui/browsers/hists.c
@@ -569,7 +569,8 @@
 static int hist_browser__hpp_color_ ## _name(struct perf_hpp *hpp,	\
 					     struct hist_entry *he)	\
 {									\
-	double percent = 100.0 * he->_field / hpp->total_period;	\
+	struct hists *hists = he->hists;				\
+	double percent = 100.0 * he->stat._field / hists->stats.total_period; \
 	*(double *)hpp->ptr = percent;					\
 	return scnprintf(hpp->buf, hpp->size, "%6.2f%%", percent);	\
 }
@@ -584,7 +585,7 @@
 
 void hist_browser__init_hpp(void)
 {
-	perf_hpp__init(false, false);
+	perf_hpp__init();
 
 	perf_hpp__format[PERF_HPP__OVERHEAD].color =
 				hist_browser__hpp_color_overhead;
@@ -624,7 +625,6 @@
 		struct perf_hpp hpp = {
 			.buf		= s,
 			.size		= sizeof(s),
-			.total_period	= browser->hists->stats.total_period,
 		};
 
 		ui_browser__gotorc(&browser->b, row, 0);
@@ -982,7 +982,7 @@
 		folded_sign = hist_entry__folded(he);
 
 	hist_entry__sort_snprintf(he, s, sizeof(s), browser->hists);
-	percent = (he->period * 100.0) / browser->hists->stats.total_period;
+	percent = (he->stat.period * 100.0) / browser->hists->stats.total_period;
 
 	if (symbol_conf.use_callchain)
 		printed += fprintf(fp, "%c ", folded_sign);
@@ -990,10 +990,10 @@
 	printed += fprintf(fp, " %5.2f%%", percent);
 
 	if (symbol_conf.show_nr_samples)
-		printed += fprintf(fp, " %11u", he->nr_events);
+		printed += fprintf(fp, " %11u", he->stat.nr_events);
 
 	if (symbol_conf.show_total_period)
-		printed += fprintf(fp, " %12" PRIu64, he->period);
+		printed += fprintf(fp, " %12" PRIu64, he->stat.period);
 
 	printed += fprintf(fp, "%s\n", rtrim(s));
 
diff --git a/tools/perf/ui/gtk/browser.c b/tools/perf/ui/gtk/browser.c
index 7ff99ec..4125c62 100644
--- a/tools/perf/ui/gtk/browser.c
+++ b/tools/perf/ui/gtk/browser.c
@@ -49,7 +49,8 @@
 static int perf_gtk__hpp_color_ ## _name(struct perf_hpp *hpp,			\
 					 struct hist_entry *he)			\
 {										\
-	double percent = 100.0 * he->_field / hpp->total_period;		\
+	struct hists *hists = he->hists;					\
+	double percent = 100.0 * he->stat._field / hists->stats.total_period;	\
 	const char *markup;							\
 	int ret = 0;								\
 										\
@@ -73,7 +74,7 @@
 
 void perf_gtk__init_hpp(void)
 {
-	perf_hpp__init(false, false);
+	perf_hpp__init();
 
 	perf_hpp__format[PERF_HPP__OVERHEAD].color =
 				perf_gtk__hpp_color_overhead;
@@ -102,7 +103,6 @@
 	struct perf_hpp hpp = {
 		.buf		= s,
 		.size		= sizeof(s),
-		.total_period	= hists->stats.total_period,
 	};
 
 	nr_cols = 0;
diff --git a/tools/perf/ui/gtk/util.c b/tools/perf/ui/gtk/util.c
index 8aada5b..ccb046a 100644
--- a/tools/perf/ui/gtk/util.c
+++ b/tools/perf/ui/gtk/util.c
@@ -116,7 +116,7 @@
  * FIXME: Functions below should be implemented properly.
  *        For now, just add stubs for NO_NEWT=1 build.
  */
-#ifdef NO_NEWT_SUPPORT
+#ifndef NEWT_SUPPORT
 void ui_progress__update(u64 curr __maybe_unused, u64 total __maybe_unused,
 			 const char *title __maybe_unused)
 {
diff --git a/tools/perf/ui/helpline.h b/tools/perf/ui/helpline.h
index 2b667ee..baa28a4 100644
--- a/tools/perf/ui/helpline.h
+++ b/tools/perf/ui/helpline.h
@@ -23,25 +23,25 @@
 
 extern char ui_helpline__current[512];
 
-#ifdef NO_NEWT_SUPPORT
+#ifdef NEWT_SUPPORT
+extern char ui_helpline__last_msg[];
+int ui_helpline__show_help(const char *format, va_list ap);
+#else
 static inline int ui_helpline__show_help(const char *format __maybe_unused,
 					 va_list ap __maybe_unused)
 {
 	return 0;
 }
-#else
-extern char ui_helpline__last_msg[];
-int ui_helpline__show_help(const char *format, va_list ap);
-#endif /* NO_NEWT_SUPPORT */
+#endif /* NEWT_SUPPORT */
 
-#ifdef NO_GTK2_SUPPORT
+#ifdef GTK2_SUPPORT
+int perf_gtk__show_helpline(const char *format, va_list ap);
+#else
 static inline int perf_gtk__show_helpline(const char *format __maybe_unused,
 					  va_list ap __maybe_unused)
 {
 	return 0;
 }
-#else
-int perf_gtk__show_helpline(const char *format, va_list ap);
-#endif /* NO_GTK2_SUPPORT */
+#endif /* GTK2_SUPPORT */
 
 #endif /* _PERF_UI_HELPLINE_H_ */
diff --git a/tools/perf/ui/hist.c b/tools/perf/ui/hist.c
index e3f8cd4..f5a1e4f 100644
--- a/tools/perf/ui/hist.c
+++ b/tools/perf/ui/hist.c
@@ -8,9 +8,7 @@
 /* hist period print (hpp) functions */
 static int hpp__header_overhead(struct perf_hpp *hpp)
 {
-	const char *fmt = hpp->ptr ? "Baseline" : "Overhead";
-
-	return scnprintf(hpp->buf, hpp->size, fmt);
+	return scnprintf(hpp->buf, hpp->size, "Overhead");
 }
 
 static int hpp__width_overhead(struct perf_hpp *hpp __maybe_unused)
@@ -20,38 +18,18 @@
 
 static int hpp__color_overhead(struct perf_hpp *hpp, struct hist_entry *he)
 {
-	double percent = 100.0 * he->period / hpp->total_period;
-
-	if (hpp->ptr) {
-		struct hists *old_hists = hpp->ptr;
-		u64 total_period = old_hists->stats.total_period;
-		u64 base_period = he->pair ? he->pair->period : 0;
-
-		if (total_period)
-			percent = 100.0 * base_period / total_period;
-		else
-			percent = 0.0;
-	}
+	struct hists *hists = he->hists;
+	double percent = 100.0 * he->stat.period / hists->stats.total_period;
 
 	return percent_color_snprintf(hpp->buf, hpp->size, " %6.2f%%", percent);
 }
 
 static int hpp__entry_overhead(struct perf_hpp *hpp, struct hist_entry *he)
 {
-	double percent = 100.0 * he->period / hpp->total_period;
+	struct hists *hists = he->hists;
+	double percent = 100.0 * he->stat.period / hists->stats.total_period;
 	const char *fmt = symbol_conf.field_sep ? "%.2f" : " %6.2f%%";
 
-	if (hpp->ptr) {
-		struct hists *old_hists = hpp->ptr;
-		u64 total_period = old_hists->stats.total_period;
-		u64 base_period = he->pair ? he->pair->period : 0;
-
-		if (total_period)
-			percent = 100.0 * base_period / total_period;
-		else
-			percent = 0.0;
-	}
-
 	return scnprintf(hpp->buf, hpp->size, fmt, percent);
 }
 
@@ -69,13 +47,16 @@
 
 static int hpp__color_overhead_sys(struct perf_hpp *hpp, struct hist_entry *he)
 {
-	double percent = 100.0 * he->period_sys / hpp->total_period;
+	struct hists *hists = he->hists;
+	double percent = 100.0 * he->stat.period_sys / hists->stats.total_period;
+
 	return percent_color_snprintf(hpp->buf, hpp->size, "%6.2f%%", percent);
 }
 
 static int hpp__entry_overhead_sys(struct perf_hpp *hpp, struct hist_entry *he)
 {
-	double percent = 100.0 * he->period_sys / hpp->total_period;
+	struct hists *hists = he->hists;
+	double percent = 100.0 * he->stat.period_sys / hists->stats.total_period;
 	const char *fmt = symbol_conf.field_sep ? "%.2f" : "%6.2f%%";
 
 	return scnprintf(hpp->buf, hpp->size, fmt, percent);
@@ -95,13 +76,16 @@
 
 static int hpp__color_overhead_us(struct perf_hpp *hpp, struct hist_entry *he)
 {
-	double percent = 100.0 * he->period_us / hpp->total_period;
+	struct hists *hists = he->hists;
+	double percent = 100.0 * he->stat.period_us / hists->stats.total_period;
+
 	return percent_color_snprintf(hpp->buf, hpp->size, "%6.2f%%", percent);
 }
 
 static int hpp__entry_overhead_us(struct perf_hpp *hpp, struct hist_entry *he)
 {
-	double percent = 100.0 * he->period_us / hpp->total_period;
+	struct hists *hists = he->hists;
+	double percent = 100.0 * he->stat.period_us / hists->stats.total_period;
 	const char *fmt = symbol_conf.field_sep ? "%.2f" : "%6.2f%%";
 
 	return scnprintf(hpp->buf, hpp->size, fmt, percent);
@@ -120,14 +104,17 @@
 static int hpp__color_overhead_guest_sys(struct perf_hpp *hpp,
 					 struct hist_entry *he)
 {
-	double percent = 100.0 * he->period_guest_sys / hpp->total_period;
+	struct hists *hists = he->hists;
+	double percent = 100.0 * he->stat.period_guest_sys / hists->stats.total_period;
+
 	return percent_color_snprintf(hpp->buf, hpp->size, " %6.2f%% ", percent);
 }
 
 static int hpp__entry_overhead_guest_sys(struct perf_hpp *hpp,
 					 struct hist_entry *he)
 {
-	double percent = 100.0 * he->period_guest_sys / hpp->total_period;
+	struct hists *hists = he->hists;
+	double percent = 100.0 * he->stat.period_guest_sys / hists->stats.total_period;
 	const char *fmt = symbol_conf.field_sep ? "%.2f" : " %6.2f%% ";
 
 	return scnprintf(hpp->buf, hpp->size, fmt, percent);
@@ -146,19 +133,63 @@
 static int hpp__color_overhead_guest_us(struct perf_hpp *hpp,
 					struct hist_entry *he)
 {
-	double percent = 100.0 * he->period_guest_us / hpp->total_period;
+	struct hists *hists = he->hists;
+	double percent = 100.0 * he->stat.period_guest_us / hists->stats.total_period;
+
 	return percent_color_snprintf(hpp->buf, hpp->size, " %6.2f%% ", percent);
 }
 
 static int hpp__entry_overhead_guest_us(struct perf_hpp *hpp,
 					struct hist_entry *he)
 {
-	double percent = 100.0 * he->period_guest_us / hpp->total_period;
+	struct hists *hists = he->hists;
+	double percent = 100.0 * he->stat.period_guest_us / hists->stats.total_period;
 	const char *fmt = symbol_conf.field_sep ? "%.2f" : " %6.2f%% ";
 
 	return scnprintf(hpp->buf, hpp->size, fmt, percent);
 }
 
+static int hpp__header_baseline(struct perf_hpp *hpp)
+{
+	return scnprintf(hpp->buf, hpp->size, "Baseline");
+}
+
+static int hpp__width_baseline(struct perf_hpp *hpp __maybe_unused)
+{
+	return 8;
+}
+
+static double baseline_percent(struct hist_entry *he)
+{
+	struct hist_entry *pair = he->pair;
+	struct hists *pair_hists = pair ? pair->hists : NULL;
+	double percent = 0.0;
+
+	if (pair) {
+		u64 total_period = pair_hists->stats.total_period;
+		u64 base_period  = pair->stat.period;
+
+		percent = 100.0 * base_period / total_period;
+	}
+
+	return percent;
+}
+
+static int hpp__color_baseline(struct perf_hpp *hpp, struct hist_entry *he)
+{
+	double percent = baseline_percent(he);
+
+	return percent_color_snprintf(hpp->buf, hpp->size, " %6.2f%%", percent);
+}
+
+static int hpp__entry_baseline(struct perf_hpp *hpp, struct hist_entry *he)
+{
+	double percent = baseline_percent(he);
+	const char *fmt = symbol_conf.field_sep ? "%.2f" : " %6.2f%%";
+
+	return scnprintf(hpp->buf, hpp->size, fmt, percent);
+}
+
 static int hpp__header_samples(struct perf_hpp *hpp)
 {
 	const char *fmt = symbol_conf.field_sep ? "%s" : "%11s";
@@ -175,7 +206,7 @@
 {
 	const char *fmt = symbol_conf.field_sep ? "%" PRIu64 : "%11" PRIu64;
 
-	return scnprintf(hpp->buf, hpp->size, fmt, he->nr_events);
+	return scnprintf(hpp->buf, hpp->size, fmt, he->stat.nr_events);
 }
 
 static int hpp__header_period(struct perf_hpp *hpp)
@@ -194,7 +225,7 @@
 {
 	const char *fmt = symbol_conf.field_sep ? "%" PRIu64 : "%12" PRIu64;
 
-	return scnprintf(hpp->buf, hpp->size, fmt, he->period);
+	return scnprintf(hpp->buf, hpp->size, fmt, he->stat.period);
 }
 
 static int hpp__header_delta(struct perf_hpp *hpp)
@@ -211,20 +242,22 @@
 
 static int hpp__entry_delta(struct perf_hpp *hpp, struct hist_entry *he)
 {
-	struct hists *pair_hists = hpp->ptr;
+	struct hist_entry *pair = he->pair;
+	struct hists *pair_hists = pair ? pair->hists : NULL;
+	struct hists *hists = he->hists;
 	u64 old_total, new_total;
 	double old_percent = 0, new_percent = 0;
 	double diff;
 	const char *fmt = symbol_conf.field_sep ? "%s" : "%7.7s";
 	char buf[32] = " ";
 
-	old_total = pair_hists->stats.total_period;
-	if (old_total > 0 && he->pair)
-		old_percent = 100.0 * he->pair->period / old_total;
+	old_total = pair_hists ? pair_hists->stats.total_period : 0;
+	if (old_total > 0 && pair)
+		old_percent = 100.0 * pair->stat.period / old_total;
 
-	new_total = hpp->total_period;
+	new_total = hists->stats.total_period;
 	if (new_total > 0)
-		new_percent = 100.0 * he->period / new_total;
+		new_percent = 100.0 * he->stat.period / new_total;
 
 	diff = new_percent - old_percent;
 	if (fabs(diff) >= 0.01)
@@ -244,13 +277,15 @@
 }
 
 static int hpp__entry_displ(struct perf_hpp *hpp,
-			    struct hist_entry *he __maybe_unused)
+			    struct hist_entry *he)
 {
+	struct hist_entry *pair = he->pair;
+	long displacement = pair ? pair->position - he->position : 0;
 	const char *fmt = symbol_conf.field_sep ? "%s" : "%6.6s";
 	char buf[32] = " ";
 
-	if (hpp->displacement)
-		scnprintf(buf, sizeof(buf), "%+4ld", hpp->displacement);
+	if (displacement)
+		scnprintf(buf, sizeof(buf), "%+4ld", displacement);
 
 	return scnprintf(hpp->buf, hpp->size, fmt, buf);
 }
@@ -267,6 +302,7 @@
 	.entry	= hpp__entry_ ## _name
 
 struct perf_hpp_fmt perf_hpp__format[] = {
+	{ .cond = false, HPP__COLOR_PRINT_FNS(baseline) },
 	{ .cond = true,  HPP__COLOR_PRINT_FNS(overhead) },
 	{ .cond = false, HPP__COLOR_PRINT_FNS(overhead_sys) },
 	{ .cond = false, HPP__COLOR_PRINT_FNS(overhead_us) },
@@ -281,7 +317,7 @@
 #undef HPP__COLOR_PRINT_FNS
 #undef HPP__PRINT_FNS
 
-void perf_hpp__init(bool need_pair, bool show_displacement)
+void perf_hpp__init(void)
 {
 	if (symbol_conf.show_cpu_utilization) {
 		perf_hpp__format[PERF_HPP__OVERHEAD_SYS].cond = true;
@@ -298,13 +334,12 @@
 
 	if (symbol_conf.show_total_period)
 		perf_hpp__format[PERF_HPP__PERIOD].cond = true;
+}
 
-	if (need_pair) {
-		perf_hpp__format[PERF_HPP__DELTA].cond = true;
-
-		if (show_displacement)
-			perf_hpp__format[PERF_HPP__DISPL].cond = true;
-	}
+void perf_hpp__column_enable(unsigned col, bool enable)
+{
+	BUG_ON(col >= PERF_HPP__MAX_INDEX);
+	perf_hpp__format[col].cond = enable;
 }
 
 static inline void advance_hpp(struct perf_hpp *hpp, int inc)
@@ -319,6 +354,7 @@
 	const char *sep = symbol_conf.field_sep;
 	char *start = hpp->buf;
 	int i, ret;
+	bool first = true;
 
 	if (symbol_conf.exclude_other && !he->parent)
 		return 0;
@@ -327,9 +363,10 @@
 		if (!perf_hpp__format[i].cond)
 			continue;
 
-		if (!sep || i > 0) {
+		if (!sep || !first) {
 			ret = scnprintf(hpp->buf, hpp->size, "%s", sep ?: "  ");
 			advance_hpp(hpp, ret);
+			first = false;
 		}
 
 		if (color && perf_hpp__format[i].color)
diff --git a/tools/perf/ui/setup.c b/tools/perf/ui/setup.c
index bd7d460..ebb4cc1 100644
--- a/tools/perf/ui/setup.c
+++ b/tools/perf/ui/setup.c
@@ -30,7 +30,7 @@
 		if (fallback_to_pager)
 			setup_pager();
 
-		perf_hpp__init(false, false);
+		perf_hpp__init();
 		break;
 	}
 }
diff --git a/tools/perf/ui/stdio/hist.c b/tools/perf/ui/stdio/hist.c
index 882461a..fbd4e32 100644
--- a/tools/perf/ui/stdio/hist.c
+++ b/tools/perf/ui/stdio/hist.c
@@ -271,7 +271,7 @@
 {
 	switch (callchain_param.mode) {
 	case CHAIN_GRAPH_REL:
-		return callchain__fprintf_graph(fp, &he->sorted_chain, he->period,
+		return callchain__fprintf_graph(fp, &he->sorted_chain, he->stat.period,
 						left_margin);
 		break;
 	case CHAIN_GRAPH_ABS:
@@ -292,9 +292,10 @@
 
 static size_t hist_entry__callchain_fprintf(struct hist_entry *he,
 					    struct hists *hists,
-					    u64 total_period, FILE *fp)
+					    FILE *fp)
 {
 	int left_margin = 0;
+	u64 total_period = hists->stats.total_period;
 
 	if (sort__first_dimension == SORT_COMM) {
 		struct sort_entry *se = list_first_entry(&hist_entry__sort_list,
@@ -307,17 +308,13 @@
 }
 
 static int hist_entry__fprintf(struct hist_entry *he, size_t size,
-			       struct hists *hists, struct hists *pair_hists,
-			       long displacement, u64 total_period, FILE *fp)
+			       struct hists *hists, FILE *fp)
 {
 	char bf[512];
 	int ret;
 	struct perf_hpp hpp = {
 		.buf		= bf,
 		.size		= size,
-		.total_period	= total_period,
-		.displacement	= displacement,
-		.ptr		= pair_hists,
 	};
 	bool color = !symbol_conf.field_sep;
 
@@ -330,22 +327,17 @@
 	ret = fprintf(fp, "%s\n", bf);
 
 	if (symbol_conf.use_callchain)
-		ret += hist_entry__callchain_fprintf(he, hists,
-						     total_period, fp);
+		ret += hist_entry__callchain_fprintf(he, hists, fp);
 
 	return ret;
 }
 
-size_t hists__fprintf(struct hists *hists, struct hists *pair,
-		      bool show_displacement, bool show_header, int max_rows,
+size_t hists__fprintf(struct hists *hists, bool show_header, int max_rows,
 		      int max_cols, FILE *fp)
 {
 	struct sort_entry *se;
 	struct rb_node *nd;
 	size_t ret = 0;
-	u64 total_period;
-	unsigned long position = 1;
-	long displacement = 0;
 	unsigned int width;
 	const char *sep = symbol_conf.field_sep;
 	const char *col_width = symbol_conf.col_width_list_str;
@@ -354,8 +346,8 @@
 	struct perf_hpp dummy_hpp = {
 		.buf	= bf,
 		.size	= sizeof(bf),
-		.ptr	= pair,
 	};
+	bool first = true;
 
 	init_rem_hits();
 
@@ -367,8 +359,10 @@
 		if (!perf_hpp__format[idx].cond)
 			continue;
 
-		if (idx)
+		if (!first)
 			fprintf(fp, "%s", sep ?: "  ");
+		else
+			first = false;
 
 		perf_hpp__format[idx].header(&dummy_hpp);
 		fprintf(fp, "%s", bf);
@@ -403,6 +397,8 @@
 	if (sep)
 		goto print_entries;
 
+	first = true;
+
 	fprintf(fp, "# ");
 	for (idx = 0; idx < PERF_HPP__MAX_INDEX; idx++) {
 		unsigned int i;
@@ -410,8 +406,10 @@
 		if (!perf_hpp__format[idx].cond)
 			continue;
 
-		if (idx)
+		if (!first)
 			fprintf(fp, "%s", sep ?: "  ");
+		else
+			first = false;
 
 		width = perf_hpp__format[idx].width(&dummy_hpp);
 		for (i = 0; i < width; i++)
@@ -441,24 +439,13 @@
 		goto out;
 
 print_entries:
-	total_period = hists->stats.total_period;
-
 	for (nd = rb_first(&hists->entries); nd; nd = rb_next(nd)) {
 		struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
 
 		if (h->filtered)
 			continue;
 
-		if (show_displacement) {
-			if (h->pair != NULL)
-				displacement = ((long)h->pair->position -
-					        (long)position);
-			else
-				displacement = 0;
-			++position;
-		}
-		ret += hist_entry__fprintf(h, max_cols, hists, pair, displacement,
-					   total_period, fp);
+		ret += hist_entry__fprintf(h, max_cols, hists, fp);
 
 		if (max_rows && ++nr_rows >= max_rows)
 			goto out;
diff --git a/tools/perf/util/annotate.h b/tools/perf/util/annotate.h
index 9b5b21e..39242dc 100644
--- a/tools/perf/util/annotate.h
+++ b/tools/perf/util/annotate.h
@@ -138,7 +138,10 @@
 			 bool print_lines, bool full_paths, int min_pcnt,
 			 int max_lines);
 
-#ifdef NO_NEWT_SUPPORT
+#ifdef NEWT_SUPPORT
+int symbol__tui_annotate(struct symbol *sym, struct map *map, int evidx,
+			 void(*timer)(void *arg), void *arg, int delay_secs);
+#else
 static inline int symbol__tui_annotate(struct symbol *sym __maybe_unused,
 				       struct map *map __maybe_unused,
 				       int evidx __maybe_unused,
@@ -148,9 +151,6 @@
 {
 	return 0;
 }
-#else
-int symbol__tui_annotate(struct symbol *sym, struct map *map, int evidx,
-			 void(*timer)(void *arg), void *arg, int delay_secs);
 #endif
 
 extern const char	*disassembler_style;
diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h
index ab17694..2bd5137 100644
--- a/tools/perf/util/cache.h
+++ b/tools/perf/util/cache.h
@@ -33,39 +33,41 @@
 
 extern int use_browser;
 
-#if defined(NO_NEWT_SUPPORT) && defined(NO_GTK2_SUPPORT)
+#if defined(NEWT_SUPPORT) || defined(GTK2_SUPPORT)
+void setup_browser(bool fallback_to_pager);
+void exit_browser(bool wait_for_ok);
+
+#ifdef NEWT_SUPPORT
+int ui__init(void);
+void ui__exit(bool wait_for_ok);
+#else
+static inline int ui__init(void)
+{
+	return -1;
+}
+static inline void ui__exit(bool wait_for_ok __maybe_unused) {}
+#endif
+
+#ifdef GTK2_SUPPORT
+int perf_gtk__init(void);
+void perf_gtk__exit(bool wait_for_ok);
+#else
+static inline int perf_gtk__init(void)
+{
+	return -1;
+}
+static inline void perf_gtk__exit(bool wait_for_ok __maybe_unused) {}
+#endif
+
+#else /* NEWT_SUPPORT || GTK2_SUPPORT */
+
 static inline void setup_browser(bool fallback_to_pager)
 {
 	if (fallback_to_pager)
 		setup_pager();
 }
 static inline void exit_browser(bool wait_for_ok __maybe_unused) {}
-#else
-void setup_browser(bool fallback_to_pager);
-void exit_browser(bool wait_for_ok);
-
-#ifdef NO_NEWT_SUPPORT
-static inline int ui__init(void)
-{
-	return -1;
-}
-static inline void ui__exit(bool wait_for_ok __maybe_unused) {}
-#else
-int ui__init(void);
-void ui__exit(bool wait_for_ok);
-#endif
-
-#ifdef NO_GTK2_SUPPORT
-static inline int perf_gtk__init(void)
-{
-	return -1;
-}
-static inline void perf_gtk__exit(bool wait_for_ok __maybe_unused) {}
-#else
-int perf_gtk__init(void);
-void perf_gtk__exit(bool wait_for_ok);
-#endif
-#endif /* NO_NEWT_SUPPORT && NO_GTK2_SUPPORT */
+#endif /* NEWT_SUPPORT || GTK2_SUPPORT */
 
 char *alias_lookup(const char *alias);
 int split_cmdline(char *cmdline, const char ***argv);
@@ -105,7 +107,7 @@
 extern char *perf_pathdup(const char *fmt, ...)
 	__attribute__((format (printf, 1, 2)));
 
-#ifdef NO_STRLCPY
+#ifndef HAVE_STRLCPY
 extern size_t strlcpy(char *dest, const char *src, size_t size);
 #endif
 
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
index 66eb382..03f830b 100644
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -49,7 +49,7 @@
 	return ret;
 }
 
-#if defined(NO_NEWT_SUPPORT) && defined(NO_GTK2_SUPPORT)
+#if !defined(NEWT_SUPPORT) && !defined(GTK2_SUPPORT)
 int ui__warning(const char *format, ...)
 {
 	va_list args;
diff --git a/tools/perf/util/debug.h b/tools/perf/util/debug.h
index bb2e7d1..dec9875 100644
--- a/tools/perf/util/debug.h
+++ b/tools/perf/util/debug.h
@@ -15,7 +15,14 @@
 struct ui_progress;
 struct perf_error_ops;
 
-#if defined(NO_NEWT_SUPPORT) && defined(NO_GTK2_SUPPORT)
+#if defined(NEWT_SUPPORT) || defined(GTK2_SUPPORT)
+
+#include "../ui/progress.h"
+int ui__error(const char *format, ...) __attribute__((format(printf, 1, 2)));
+#include "../ui/util.h"
+
+#else
+
 static inline void ui_progress__update(u64 curr __maybe_unused,
 				       u64 total __maybe_unused,
 				       const char *title __maybe_unused) {}
@@ -34,13 +41,7 @@
 	return 0;
 }
 
-#else /* NO_NEWT_SUPPORT && NO_GTK2_SUPPORT */
-
-#include "../ui/progress.h"
-int ui__error(const char *format, ...) __attribute__((format(printf, 1, 2)));
-#include "../ui/util.h"
-
-#endif /* NO_NEWT_SUPPORT && NO_GTK2_SUPPORT */
+#endif /* NEWT_SUPPORT || GTK2_SUPPORT */
 
 int ui__warning(const char *format, ...) __attribute__((format(printf, 1, 2)));
 int ui__error_paranoid(void);
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index ae89686..186b877 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -154,8 +154,8 @@
 	return -ENOMEM;
 }
 
-int perf_evlist__add_attrs(struct perf_evlist *evlist,
-			   struct perf_event_attr *attrs, size_t nr_attrs)
+static int perf_evlist__add_attrs(struct perf_evlist *evlist,
+				  struct perf_event_attr *attrs, size_t nr_attrs)
 {
 	struct perf_evsel *evsel, *n;
 	LIST_HEAD(head);
@@ -189,60 +189,6 @@
 	return perf_evlist__add_attrs(evlist, attrs, nr_attrs);
 }
 
-static int trace_event__id(const char *evname)
-{
-	char *filename, *colon;
-	int err = -1, fd;
-
-	if (asprintf(&filename, "%s/%s/id", tracing_events_path, evname) < 0)
-		return -1;
-
-	colon = strrchr(filename, ':');
-	if (colon != NULL)
-		*colon = '/';
-
-	fd = open(filename, O_RDONLY);
-	if (fd >= 0) {
-		char id[16];
-		if (read(fd, id, sizeof(id)) > 0)
-			err = atoi(id);
-		close(fd);
-	}
-
-	free(filename);
-	return err;
-}
-
-int perf_evlist__add_tracepoints(struct perf_evlist *evlist,
-				 const char *tracepoints[],
-				 size_t nr_tracepoints)
-{
-	int err;
-	size_t i;
-	struct perf_event_attr *attrs = zalloc(nr_tracepoints * sizeof(*attrs));
-
-	if (attrs == NULL)
-		return -1;
-
-	for (i = 0; i < nr_tracepoints; i++) {
-		err = trace_event__id(tracepoints[i]);
-
-		if (err < 0)
-			goto out_free_attrs;
-
-		attrs[i].type	       = PERF_TYPE_TRACEPOINT;
-		attrs[i].config	       = err;
-	        attrs[i].sample_type   = (PERF_SAMPLE_RAW | PERF_SAMPLE_TIME |
-					  PERF_SAMPLE_CPU | PERF_SAMPLE_PERIOD);
-		attrs[i].sample_period = 1;
-	}
-
-	err = perf_evlist__add_attrs(evlist, attrs, nr_tracepoints);
-out_free_attrs:
-	free(attrs);
-	return err;
-}
-
 struct perf_evsel *
 perf_evlist__find_tracepoint_by_id(struct perf_evlist *evlist, int id)
 {
@@ -257,32 +203,18 @@
 	return NULL;
 }
 
-int perf_evlist__set_tracepoints_handlers(struct perf_evlist *evlist,
-					  const struct perf_evsel_str_handler *assocs,
-					  size_t nr_assocs)
+int perf_evlist__add_newtp(struct perf_evlist *evlist,
+			   const char *sys, const char *name, void *handler)
 {
 	struct perf_evsel *evsel;
-	int err;
-	size_t i;
 
-	for (i = 0; i < nr_assocs; i++) {
-		err = trace_event__id(assocs[i].name);
-		if (err < 0)
-			goto out;
+	evsel = perf_evsel__newtp(sys, name, evlist->nr_entries);
+	if (evsel == NULL)
+		return -1;
 
-		evsel = perf_evlist__find_tracepoint_by_id(evlist, err);
-		if (evsel == NULL)
-			continue;
-
-		err = -EEXIST;
-		if (evsel->handler.func != NULL)
-			goto out;
-		evsel->handler.func = assocs[i].handler;
-	}
-
-	err = 0;
-out:
-	return err;
+	evsel->handler.func = handler;
+	perf_evlist__add(evlist, evsel);
+	return 0;
 }
 
 void perf_evlist__disable(struct perf_evlist *evlist)
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index 3f1fb66..56003f7 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -51,26 +51,14 @@
 
 void perf_evlist__add(struct perf_evlist *evlist, struct perf_evsel *entry);
 int perf_evlist__add_default(struct perf_evlist *evlist);
-int perf_evlist__add_attrs(struct perf_evlist *evlist,
-			   struct perf_event_attr *attrs, size_t nr_attrs);
 int __perf_evlist__add_default_attrs(struct perf_evlist *evlist,
 				     struct perf_event_attr *attrs, size_t nr_attrs);
-int perf_evlist__add_tracepoints(struct perf_evlist *evlist,
-				 const char *tracepoints[], size_t nr_tracepoints);
-int perf_evlist__set_tracepoints_handlers(struct perf_evlist *evlist,
-					  const struct perf_evsel_str_handler *assocs,
-					  size_t nr_assocs);
 
-#define perf_evlist__add_attrs_array(evlist, array) \
-	perf_evlist__add_attrs(evlist, array, ARRAY_SIZE(array))
 #define perf_evlist__add_default_attrs(evlist, array) \
 	__perf_evlist__add_default_attrs(evlist, array, ARRAY_SIZE(array))
 
-#define perf_evlist__add_tracepoints_array(evlist, array) \
-	perf_evlist__add_tracepoints(evlist, array, ARRAY_SIZE(array))
-
-#define perf_evlist__set_tracepoints_handlers_array(evlist, array) \
-	perf_evlist__set_tracepoints_handlers(evlist, array, ARRAY_SIZE(array))
+int perf_evlist__add_newtp(struct perf_evlist *evlist,
+			   const char *sys, const char *name, void *handler);
 
 int perf_evlist__set_filter(struct perf_evlist *evlist, const char *filter);
 
diff --git a/tools/perf/util/generate-cmdlist.sh b/tools/perf/util/generate-cmdlist.sh
index 389590c..3ac3803 100755
--- a/tools/perf/util/generate-cmdlist.sh
+++ b/tools/perf/util/generate-cmdlist.sh
@@ -22,7 +22,7 @@
      }' "Documentation/perf-$cmd.txt"
 done
 
-echo "#ifndef NO_LIBELF_SUPPORT"
+echo "#ifdef LIBELF_SUPPORT"
 sed -n -e 's/^perf-\([^ 	]*\)[ 	].* full.*/\1/p' command-list.txt |
 sort |
 while read cmd
@@ -35,5 +35,5 @@
 	    p
      }' "Documentation/perf-$cmd.txt"
 done
-echo "#endif /* NO_LIBELF_SUPPORT */"
+echo "#endif /* LIBELF_SUPPORT */"
 echo "};"
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 236bc9d..277947a 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -135,31 +135,47 @@
 {
 	switch (cpumode) {
 	case PERF_RECORD_MISC_KERNEL:
-		he->period_sys += period;
+		he->stat.period_sys += period;
 		break;
 	case PERF_RECORD_MISC_USER:
-		he->period_us += period;
+		he->stat.period_us += period;
 		break;
 	case PERF_RECORD_MISC_GUEST_KERNEL:
-		he->period_guest_sys += period;
+		he->stat.period_guest_sys += period;
 		break;
 	case PERF_RECORD_MISC_GUEST_USER:
-		he->period_guest_us += period;
+		he->stat.period_guest_us += period;
 		break;
 	default:
 		break;
 	}
 }
 
+static void he_stat__add_period(struct he_stat *he_stat, u64 period)
+{
+	he_stat->period		+= period;
+	he_stat->nr_events	+= 1;
+}
+
+static void he_stat__add_stat(struct he_stat *dest, struct he_stat *src)
+{
+	dest->period		+= src->period;
+	dest->period_sys	+= src->period_sys;
+	dest->period_us		+= src->period_us;
+	dest->period_guest_sys	+= src->period_guest_sys;
+	dest->period_guest_us	+= src->period_guest_us;
+	dest->nr_events		+= src->nr_events;
+}
+
 static void hist_entry__decay(struct hist_entry *he)
 {
-	he->period = (he->period * 7) / 8;
-	he->nr_events = (he->nr_events * 7) / 8;
+	he->stat.period = (he->stat.period * 7) / 8;
+	he->stat.nr_events = (he->stat.nr_events * 7) / 8;
 }
 
 static bool hists__decay_entry(struct hists *hists, struct hist_entry *he)
 {
-	u64 prev_period = he->period;
+	u64 prev_period = he->stat.period;
 
 	if (prev_period == 0)
 		return true;
@@ -167,9 +183,9 @@
 	hist_entry__decay(he);
 
 	if (!he->filtered)
-		hists->stats.total_period -= prev_period - he->period;
+		hists->stats.total_period -= prev_period - he->stat.period;
 
-	return he->period == 0;
+	return he->stat.period == 0;
 }
 
 static void __hists__decay_entries(struct hists *hists, bool zap_user,
@@ -223,7 +239,7 @@
 
 	if (he != NULL) {
 		*he = *template;
-		he->nr_events = 1;
+
 		if (he->ms.map)
 			he->ms.map->referenced = true;
 		if (symbol_conf.use_callchain)
@@ -238,7 +254,7 @@
 	if (!h->filtered) {
 		hists__calc_col_len(hists, h);
 		++hists->nr_entries;
-		hists->stats.total_period += h->period;
+		hists->stats.total_period += h->stat.period;
 	}
 }
 
@@ -270,8 +286,7 @@
 		cmp = hist_entry__cmp(entry, he);
 
 		if (!cmp) {
-			he->period += period;
-			++he->nr_events;
+			he_stat__add_period(&he->stat, period);
 
 			/* If the map of an existing hist_entry has
 			 * become out-of-date due to an exec() or
@@ -321,10 +336,14 @@
 		.cpu	= al->cpu,
 		.ip	= bi->to.addr,
 		.level	= al->level,
-		.period	= period,
+		.stat = {
+			.period	= period,
+			.nr_events = 1,
+		},
 		.parent = sym_parent,
 		.filtered = symbol__parent_filter(sym_parent),
 		.branch_info = bi,
+		.hists	= self,
 	};
 
 	return add_hist_entry(self, &entry, al, period);
@@ -343,9 +362,13 @@
 		.cpu	= al->cpu,
 		.ip	= al->addr,
 		.level	= al->level,
-		.period	= period,
+		.stat = {
+			.period	= period,
+			.nr_events = 1,
+		},
 		.parent = sym_parent,
 		.filtered = symbol__parent_filter(sym_parent),
+		.hists	= self,
 	};
 
 	return add_hist_entry(self, &entry, al, period);
@@ -410,12 +433,7 @@
 		cmp = hist_entry__collapse(iter, he);
 
 		if (!cmp) {
-			iter->period		+= he->period;
-			iter->period_sys	+= he->period_sys;
-			iter->period_us		+= he->period_us;
-			iter->period_guest_sys	+= he->period_guest_sys;
-			iter->period_guest_us	+= he->period_guest_us;
-			iter->nr_events		+= he->nr_events;
+			he_stat__add_stat(&iter->stat, &he->stat);
 
 			if (symbol_conf.use_callchain) {
 				callchain_cursor_reset(&callchain_cursor);
@@ -518,7 +536,7 @@
 		parent = *p;
 		iter = rb_entry(parent, struct hist_entry, rb_node);
 
-		if (he->period > iter->period)
+		if (he->stat.period > iter->stat.period)
 			p = &(*p)->rb_left;
 		else
 			p = &(*p)->rb_right;
@@ -579,8 +597,8 @@
 	if (h->ms.unfolded)
 		hists->nr_entries += h->nr_rows;
 	h->row_offset = 0;
-	hists->stats.total_period += h->period;
-	hists->stats.nr_events[PERF_RECORD_SAMPLE] += h->nr_events;
+	hists->stats.total_period += h->stat.period;
+	hists->stats.nr_events[PERF_RECORD_SAMPLE] += h->stat.nr_events;
 
 	hists__calc_col_len(hists, h);
 }
diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h
index f011ad4..66cb31f 100644
--- a/tools/perf/util/hist.h
+++ b/tools/perf/util/hist.h
@@ -98,9 +98,8 @@
 void hists__inc_nr_events(struct hists *self, u32 type);
 size_t hists__fprintf_nr_events(struct hists *self, FILE *fp);
 
-size_t hists__fprintf(struct hists *self, struct hists *pair,
-		      bool show_displacement, bool show_header,
-		      int max_rows, int max_cols, FILE *fp);
+size_t hists__fprintf(struct hists *self, bool show_header, int max_rows,
+		      int max_cols, FILE *fp);
 
 int hist_entry__inc_addr_samples(struct hist_entry *self, int evidx, u64 addr);
 int hist_entry__annotate(struct hist_entry *self, size_t privsize);
@@ -118,9 +117,7 @@
 struct perf_hpp {
 	char *buf;
 	size_t size;
-	u64 total_period;
 	const char *sep;
-	long displacement;
 	void *ptr;
 };
 
@@ -135,6 +132,7 @@
 extern struct perf_hpp_fmt perf_hpp__format[];
 
 enum {
+	PERF_HPP__BASELINE,
 	PERF_HPP__OVERHEAD,
 	PERF_HPP__OVERHEAD_SYS,
 	PERF_HPP__OVERHEAD_US,
@@ -148,13 +146,22 @@
 	PERF_HPP__MAX_INDEX
 };
 
-void perf_hpp__init(bool need_pair, bool show_displacement);
+void perf_hpp__init(void);
+void perf_hpp__column_enable(unsigned col, bool enable);
 int hist_entry__period_snprintf(struct perf_hpp *hpp, struct hist_entry *he,
 				bool color);
 
 struct perf_evlist;
 
-#ifdef NO_NEWT_SUPPORT
+#ifdef NEWT_SUPPORT
+#include "../ui/keysyms.h"
+int hist_entry__tui_annotate(struct hist_entry *he, int evidx,
+			     void(*timer)(void *arg), void *arg, int delay_secs);
+
+int perf_evlist__tui_browse_hists(struct perf_evlist *evlist, const char *help,
+				  void(*timer)(void *arg), void *arg,
+				  int refresh);
+#else
 static inline
 int perf_evlist__tui_browse_hists(struct perf_evlist *evlist __maybe_unused,
 				  const char *help __maybe_unused,
@@ -177,17 +184,13 @@
 }
 #define K_LEFT -1
 #define K_RIGHT -2
-#else
-#include "../ui/keysyms.h"
-int hist_entry__tui_annotate(struct hist_entry *he, int evidx,
-			     void(*timer)(void *arg), void *arg, int delay_secs);
-
-int perf_evlist__tui_browse_hists(struct perf_evlist *evlist, const char *help,
-				  void(*timer)(void *arg), void *arg,
-				  int refresh);
 #endif
 
-#ifdef NO_GTK2_SUPPORT
+#ifdef GTK2_SUPPORT
+int perf_evlist__gtk_browse_hists(struct perf_evlist *evlist, const char *help,
+				  void(*timer)(void *arg), void *arg,
+				  int refresh);
+#else
 static inline
 int perf_evlist__gtk_browse_hists(struct perf_evlist *evlist __maybe_unused,
 				  const char *help __maybe_unused,
@@ -197,11 +200,6 @@
 {
 	return 0;
 }
-
-#else
-int perf_evlist__gtk_browse_hists(struct perf_evlist *evlist, const char *help,
-				  void(*timer)(void *arg), void *arg,
-				  int refresh);
 #endif
 
 unsigned int hists__sort_list_width(struct hists *self);
diff --git a/tools/perf/util/include/linux/rbtree_augmented.h b/tools/perf/util/include/linux/rbtree_augmented.h
new file mode 100644
index 0000000..9d6fcdf
--- /dev/null
+++ b/tools/perf/util/include/linux/rbtree_augmented.h
@@ -0,0 +1,2 @@
+#include <stdbool.h>
+#include "../../../../include/linux/rbtree_augmented.h"
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index ead5316..6109fa4 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -162,7 +162,7 @@
 		pr_warning(", continuing without symbols\n");
 		return -1;
 	} else if (nr == 0) {
-#ifndef NO_LIBELF_SUPPORT
+#ifdef LIBELF_SUPPORT
 		const size_t len = strlen(name);
 		const size_t real_len = len - sizeof(DSO__DELETED);
 
diff --git a/tools/perf/util/parse-options.c b/tools/perf/util/parse-options.c
index 443fc11..2bc9e70 100644
--- a/tools/perf/util/parse-options.c
+++ b/tools/perf/util/parse-options.c
@@ -384,6 +384,8 @@
 			return usage_with_options_internal(usagestr, options, 1);
 		if (internal_help && !strcmp(arg + 2, "help"))
 			return parse_options_usage(usagestr, options);
+		if (!strcmp(arg + 2, "list-opts"))
+			return PARSE_OPT_LIST;
 		switch (parse_long_opt(ctx, arg + 2, options)) {
 		case -1:
 			return parse_options_usage(usagestr, options);
@@ -422,6 +424,12 @@
 		exit(129);
 	case PARSE_OPT_DONE:
 		break;
+	case PARSE_OPT_LIST:
+		while (options->type != OPTION_END) {
+			printf("--%s ", options->long_name);
+			options++;
+		}
+		exit(130);
 	default: /* PARSE_OPT_UNKNOWN */
 		if (ctx.argv[0][1] == '-') {
 			error("unknown option `%s'", ctx.argv[0] + 2);
diff --git a/tools/perf/util/parse-options.h b/tools/perf/util/parse-options.h
index abc31a1..7bb5999 100644
--- a/tools/perf/util/parse-options.h
+++ b/tools/perf/util/parse-options.h
@@ -140,6 +140,7 @@
 enum {
 	PARSE_OPT_HELP = -1,
 	PARSE_OPT_DONE,
+	PARSE_OPT_LIST,
 	PARSE_OPT_UNKNOWN,
 };
 
diff --git a/tools/perf/util/path.c b/tools/perf/util/path.c
index bd74977..a8c4954 100644
--- a/tools/perf/util/path.c
+++ b/tools/perf/util/path.c
@@ -22,7 +22,7 @@
 	return ".";
 }
 
-#ifdef NO_STRLCPY
+#ifndef HAVE_STRLCPY
 size_t strlcpy(char *dest, const char *src, size_t size)
 {
 	size_t ret = strlen(src);
diff --git a/tools/perf/util/perf_regs.h b/tools/perf/util/perf_regs.h
index 316dbe7..5a4f2b6f 100644
--- a/tools/perf/util/perf_regs.h
+++ b/tools/perf/util/perf_regs.h
@@ -1,7 +1,7 @@
 #ifndef __PERF_REGS_H
 #define __PERF_REGS_H
 
-#ifndef NO_PERF_REGS
+#ifdef HAVE_PERF_REGS
 #include <perf_regs.h>
 #else
 #define PERF_REGS_MASK	0
@@ -10,5 +10,5 @@
 {
 	return NULL;
 }
-#endif /* NO_PERF_REGS */
+#endif /* HAVE_PERF_REGS */
 #endif /* __PERF_REGS_H */
diff --git a/tools/perf/util/sort.h b/tools/perf/util/sort.h
index 12d6347..5786f32 100644
--- a/tools/perf/util/sort.h
+++ b/tools/perf/util/sort.h
@@ -43,6 +43,15 @@
 extern struct sort_entry sort_sym_to;
 extern enum sort_type sort__first_dimension;
 
+struct he_stat {
+	u64			period;
+	u64			period_sys;
+	u64			period_us;
+	u64			period_guest_sys;
+	u64			period_guest_us;
+	u32			nr_events;
+};
+
 /**
  * struct hist_entry - histogram entry
  *
@@ -52,16 +61,11 @@
 struct hist_entry {
 	struct rb_node		rb_node_in;
 	struct rb_node		rb_node;
-	u64			period;
-	u64			period_sys;
-	u64			period_us;
-	u64			period_guest_sys;
-	u64			period_guest_us;
+	struct he_stat		stat;
 	struct map_symbol	ms;
 	struct thread		*thread;
 	u64			ip;
 	s32			cpu;
-	u32			nr_events;
 
 	/* XXX These two should move to some tree widget lib */
 	u16			row_offset;
@@ -73,12 +77,13 @@
 	u8			filtered;
 	char			*srcline;
 	struct symbol		*parent;
+	unsigned long		position;
 	union {
-		unsigned long	  position;
 		struct hist_entry *pair;
 		struct rb_root	  sorted_chain;
 	};
 	struct branch_info	*branch_info;
+	struct hists		*hists;
 	struct callchain_root	callchain[0];
 };
 
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index b441b07..8b6ef7f 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -12,7 +12,7 @@
 #include <byteswap.h>
 #include <libgen.h>
 
-#ifndef NO_LIBELF_SUPPORT
+#ifdef LIBELF_SUPPORT
 #include <libelf.h>
 #include <gelf.h>
 #include <elf.h>
@@ -46,10 +46,10 @@
  * libelf 0.8.x and earlier do not support ELF_C_READ_MMAP;
  * for newer versions we can use mmap to reduce memory usage:
  */
-#ifdef LIBELF_NO_MMAP
-# define PERF_ELF_C_READ_MMAP ELF_C_READ
-#else
+#ifdef LIBELF_MMAP
 # define PERF_ELF_C_READ_MMAP ELF_C_READ_MMAP
+#else
+# define PERF_ELF_C_READ_MMAP ELF_C_READ
 #endif
 
 #ifndef DMGL_PARAMS
@@ -233,7 +233,7 @@
 	int fd;
 	enum dso_binary_type type;
 
-#ifndef NO_LIBELF_SUPPORT
+#ifdef LIBELF_SUPPORT
 	Elf *elf;
 	GElf_Ehdr ehdr;
 
diff --git a/tools/perf/util/unwind.h b/tools/perf/util/unwind.h
index a78c8b3..cb6bc50 100644
--- a/tools/perf/util/unwind.h
+++ b/tools/perf/util/unwind.h
@@ -13,7 +13,7 @@
 
 typedef int (*unwind_entry_cb_t)(struct unwind_entry *entry, void *arg);
 
-#ifndef NO_LIBUNWIND_SUPPORT
+#ifdef LIBUNWIND_SUPPORT
 int unwind__get_entries(unwind_entry_cb_t cb, void *arg,
 			struct machine *machine,
 			struct thread *thread,
@@ -31,5 +31,5 @@
 {
 	return 0;
 }
-#endif /* NO_LIBUNWIND_SUPPORT */
+#endif /* LIBUNWIND_SUPPORT */
 #endif /* __UNWIND_H */
diff --git a/tools/perf/util/util.c b/tools/perf/util/util.c
index 2055cf3..9966459 100644
--- a/tools/perf/util/util.c
+++ b/tools/perf/util/util.c
@@ -1,7 +1,7 @@
 #include "../perf.h"
 #include "util.h"
 #include <sys/mman.h>
-#ifndef NO_BACKTRACE
+#ifdef BACKTRACE_SUPPORT
 #include <execinfo.h>
 #endif
 #include <stdio.h>
@@ -165,7 +165,7 @@
 }
 
 /* Obtain a backtrace and print it to stdout. */
-#ifndef NO_BACKTRACE
+#ifdef BACKTRACE_SUPPORT
 void dump_stack(void)
 {
 	void *array[16];
diff --git a/tools/power/acpi/acpidump.c b/tools/power/acpi/acpidump.c
index 0777987..a84553a 100644
--- a/tools/power/acpi/acpidump.c
+++ b/tools/power/acpi/acpidump.c
@@ -62,7 +62,6 @@
 #include <unistd.h>
 #include <getopt.h>
 
-#include <sys/types.h>
 #include <dirent.h>
 
 #include <acpi/acconfig.h>
diff --git a/tools/vm/page-types.c b/tools/vm/page-types.c
index f576971..cd1b03e 100644
--- a/tools/vm/page-types.c
+++ b/tools/vm/page-types.c
@@ -34,7 +34,7 @@
 #include <sys/fcntl.h>
 #include <sys/mount.h>
 #include <sys/statfs.h>
-#include "../../include/linux/magic.h"
+#include "../../include/uapi/linux/magic.h"
 #include "../../include/linux/kernel-page-flags.h"