[PATCH] USB: update for acm in quirks and debug
this adds
better debugging output &
an update of the quirk list
to the acm driver
Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 3670d77..ca90326 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -291,13 +291,13 @@
struct acm_ru *rcv = urb->context;
struct acm *acm = rcv->instance;
int status = urb->status;
- dbg("Entering acm_read_bulk with status %d\n", urb->status);
+ dbg("Entering acm_read_bulk with status %d", urb->status);
if (!ACM_READY(acm))
return;
if (status)
- dev_dbg(&acm->data->dev, "bulk rx status %d\n", status);
+ dev_dbg(&acm->data->dev, "bulk rx status %d", status);
buf = rcv->buffer;
buf->size = urb->actual_length;
@@ -343,7 +343,7 @@
list_del(&buf->list);
spin_unlock(&acm->read_lock);
- dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d\n", buf, buf->size);
+ dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
tty_buffer_request_room(tty, buf->size);
if (!acm->throttle)
@@ -394,7 +394,7 @@
rcv->urb->transfer_dma = buf->dma;
rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
- dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p\n", rcv->urb, rcv, buf);
+ dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p", rcv->urb, rcv, buf);
/* This shouldn't kill the driver as unsuccessful URBs are returned to the
free-urbs-pool and resubmited ASAP */
@@ -413,7 +413,7 @@
{
struct acm *acm = (struct acm *)urb->context;
- dbg("Entering acm_write_bulk with status %d\n", urb->status);
+ dbg("Entering acm_write_bulk with status %d", urb->status);
acm_write_done(acm);
acm_write_start(acm);
@@ -424,7 +424,7 @@
static void acm_softint(void *private)
{
struct acm *acm = private;
- dbg("Entering acm_softint.\n");
+ dbg("Entering acm_softint.");
if (!ACM_READY(acm))
return;
@@ -440,7 +440,7 @@
struct acm *acm;
int rv = -EINVAL;
int i;
- dbg("Entering acm_tty_open.\n");
+ dbg("Entering acm_tty_open.");
mutex_lock(&open_mutex);
@@ -541,7 +541,7 @@
int wbn;
struct acm_wb *wb;
- dbg("Entering acm_tty_write to write %d bytes,\n", count);
+ dbg("Entering acm_tty_write to write %d bytes,", count);
if (!ACM_READY(acm))
return -EINVAL;
@@ -793,7 +793,7 @@
if (!buflen) {
if (intf->cur_altsetting->endpoint->extralen && intf->cur_altsetting->endpoint->extra) {
- dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint\n");
+ dev_dbg(&intf->dev,"Seeking extra descriptors on endpoint");
buflen = intf->cur_altsetting->endpoint->extralen;
buffer = intf->cur_altsetting->endpoint->extra;
} else {
@@ -842,24 +842,24 @@
if (!union_header) {
if (call_interface_num > 0) {
- dev_dbg(&intf->dev,"No union descriptor, using call management descriptor\n");
+ dev_dbg(&intf->dev,"No union descriptor, using call management descriptor");
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num));
control_interface = intf;
} else {
- dev_dbg(&intf->dev,"No union descriptor, giving up\n");
+ dev_dbg(&intf->dev,"No union descriptor, giving up");
return -ENODEV;
}
} else {
control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0);
data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0));
if (!control_interface || !data_interface) {
- dev_dbg(&intf->dev,"no interfaces\n");
+ dev_dbg(&intf->dev,"no interfaces");
return -ENODEV;
}
}
if (data_interface_num != call_interface_num)
- dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.\n");
+ dev_dbg(&intf->dev,"Seperate call control interface. That is not fully supported.");
skip_normal_probe:
@@ -867,7 +867,7 @@
if (data_interface->cur_altsetting->desc.bInterfaceClass != CDC_DATA_INTERFACE_TYPE) {
if (control_interface->cur_altsetting->desc.bInterfaceClass == CDC_DATA_INTERFACE_TYPE) {
struct usb_interface *t;
- dev_dbg(&intf->dev,"Your device has switched interfaces.\n");
+ dev_dbg(&intf->dev,"Your device has switched interfaces.");
t = control_interface;
control_interface = data_interface;
@@ -878,7 +878,7 @@
}
if (usb_interface_claimed(data_interface)) { /* valid in this context */
- dev_dbg(&intf->dev,"The data interface isn't available\n");
+ dev_dbg(&intf->dev,"The data interface isn't available");
return -EBUSY;
}
@@ -895,7 +895,7 @@
if ((epread->bEndpointAddress & USB_DIR_IN) != USB_DIR_IN) {
/* descriptors are swapped */
struct usb_endpoint_descriptor *t;
- dev_dbg(&intf->dev,"The data interface has switched endpoints\n");
+ dev_dbg(&intf->dev,"The data interface has switched endpoints");
t = epread;
epread = epwrite;
@@ -910,7 +910,7 @@
}
if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
- dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
+ dev_dbg(&intf->dev, "out of memory (acm kzalloc)");
goto alloc_fail;
}
@@ -936,26 +936,26 @@
buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
if (!buf) {
- dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n");
+ dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)");
goto alloc_fail2;
}
acm->ctrl_buffer = buf;
if (acm_write_buffers_alloc(acm) < 0) {
- dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n");
+ dev_dbg(&intf->dev, "out of memory (write buffer alloc)");
goto alloc_fail4;
}
acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->ctrlurb) {
- dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n");
+ dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)");
goto alloc_fail5;
}
for (i = 0; i < num_rx_buf; i++) {
struct acm_ru *rcv = &(acm->ru[i]);
if (!(rcv->urb = usb_alloc_urb(0, GFP_KERNEL))) {
- dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)\n");
+ dev_dbg(&intf->dev, "out of memory (read urbs usb_alloc_urb)");
goto alloc_fail7;
}
@@ -966,13 +966,13 @@
struct acm_rb *buf = &(acm->rb[i]);
if (!(buf->base = usb_buffer_alloc(acm->dev, readsize, GFP_KERNEL, &buf->dma))) {
- dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)\n");
+ dev_dbg(&intf->dev, "out of memory (read bufs usb_buffer_alloc)");
goto alloc_fail7;
}
}
acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
if (!acm->writeurb) {
- dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)\n");
+ dev_dbg(&intf->dev, "out of memory (writeurb kmalloc)");
goto alloc_fail7;
}
@@ -1086,6 +1086,9 @@
{ USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */
.driver_info = SINGLE_RX_URB, /* firmware bug */
},
+ { USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
+ .driver_info = SINGLE_RX_URB, /* firmware bug */
+ },
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
USB_CDC_ACM_PROTO_AT_V25TER) },