smc91x: introduce platform data flags V2
This patch introduces struct smc91x_platdata and modifies the driver so
bus width is checked during run time using SMC_nBIT() instead of
SMC_CAN_USE_nBIT.
V2 keeps static configuration lean using SMC_DYNAMIC_BUS_CONFIG.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 92ff9c4..e044b4d 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -34,6 +34,7 @@
#ifndef _SMC91X_H_
#define _SMC91X_H_
+#include <linux/smc91x.h>
/*
* Define your architecture specific bus configuration parameters here.
@@ -481,6 +482,7 @@
#define RPC_LSA_DEFAULT RPC_LED_100_10
#define RPC_LSB_DEFAULT RPC_LED_TX_RX
+#define SMC_DYNAMIC_BUS_CONFIG
#endif
@@ -526,8 +528,19 @@
#endif
void __iomem *base;
void __iomem *datacs;
+
+ struct smc91x_platdata cfg;
};
+#ifdef SMC_DYNAMIC_BUS_CONFIG
+#define SMC_8BIT(p) (((p)->cfg.flags & SMC91X_USE_8BIT) && SMC_CAN_USE_8BIT)
+#define SMC_16BIT(p) (((p)->cfg.flags & SMC91X_USE_16BIT) && SMC_CAN_USE_16BIT)
+#define SMC_32BIT(p) (((p)->cfg.flags & SMC91X_USE_32BIT) && SMC_CAN_USE_32BIT)
+#else
+#define SMC_8BIT(p) SMC_CAN_USE_8BIT
+#define SMC_16BIT(p) SMC_CAN_USE_16BIT
+#define SMC_32BIT(p) SMC_CAN_USE_32BIT
+#endif
#ifdef SMC_USE_PXA_DMA
/*
@@ -1108,41 +1121,41 @@
*
* Enforce it on any 32-bit capable setup for now.
*/
-#define SMC_MUST_ALIGN_WRITE SMC_CAN_USE_32BIT
+#define SMC_MUST_ALIGN_WRITE(lp) SMC_32BIT(lp)
#define SMC_GET_PN(lp) \
- (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, PN_REG(lp))) \
+ (SMC_8BIT(lp) ? (SMC_inb(ioaddr, PN_REG(lp))) \
: (SMC_inw(ioaddr, PN_REG(lp)) & 0xFF))
#define SMC_SET_PN(lp, x) \
do { \
- if (SMC_MUST_ALIGN_WRITE) \
+ if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 0, 2)); \
- else if (SMC_CAN_USE_8BIT) \
+ else if (SMC_8BIT(lp)) \
SMC_outb(x, ioaddr, PN_REG(lp)); \
else \
SMC_outw(x, ioaddr, PN_REG(lp)); \
} while (0)
#define SMC_GET_AR(lp) \
- (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, AR_REG(lp))) \
+ (SMC_8BIT(lp) ? (SMC_inb(ioaddr, AR_REG(lp))) \
: (SMC_inw(ioaddr, PN_REG(lp)) >> 8))
#define SMC_GET_TXFIFO(lp) \
- (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, TXFIFO_REG(lp))) \
+ (SMC_8BIT(lp) ? (SMC_inb(ioaddr, TXFIFO_REG(lp))) \
: (SMC_inw(ioaddr, TXFIFO_REG(lp)) & 0xFF))
#define SMC_GET_RXFIFO(lp) \
- (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, RXFIFO_REG(lp))) \
+ (SMC_8BIT(lp) ? (SMC_inb(ioaddr, RXFIFO_REG(lp))) \
: (SMC_inw(ioaddr, TXFIFO_REG(lp)) >> 8))
#define SMC_GET_INT(lp) \
- (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, INT_REG(lp))) \
+ (SMC_8BIT(lp) ? (SMC_inb(ioaddr, INT_REG(lp))) \
: (SMC_inw(ioaddr, INT_REG(lp)) & 0xFF))
#define SMC_ACK_INT(lp, x) \
do { \
- if (SMC_CAN_USE_8BIT) \
+ if (SMC_8BIT(lp)) \
SMC_outb(x, ioaddr, INT_REG(lp)); \
else { \
unsigned long __flags; \
@@ -1155,12 +1168,12 @@
} while (0)
#define SMC_GET_INT_MASK(lp) \
- (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, IM_REG(lp))) \
+ (SMC_8BIT(lp) ? (SMC_inb(ioaddr, IM_REG(lp))) \
: (SMC_inw(ioaddr, INT_REG(lp)) >> 8))
#define SMC_SET_INT_MASK(lp, x) \
do { \
- if (SMC_CAN_USE_8BIT) \
+ if (SMC_8BIT(lp)) \
SMC_outb(x, ioaddr, IM_REG(lp)); \
else \
SMC_outw((x) << 8, ioaddr, INT_REG(lp)); \
@@ -1170,7 +1183,7 @@
#define SMC_SELECT_BANK(lp, x) \
do { \
- if (SMC_MUST_ALIGN_WRITE) \
+ if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, 12<<SMC_IO_SHIFT); \
else \
SMC_outw(x, ioaddr, BANK_SELECT); \
@@ -1208,7 +1221,7 @@
#define SMC_SET_PTR(lp, x) \
do { \
- if (SMC_MUST_ALIGN_WRITE) \
+ if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 4, 2)); \
else \
SMC_outw(x, ioaddr, PTR_REG(lp)); \
@@ -1226,7 +1239,7 @@
#define SMC_SET_RPC(lp, x) \
do { \
- if (SMC_MUST_ALIGN_WRITE) \
+ if (SMC_MUST_ALIGN_WRITE(lp)) \
SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 8, 0)); \
else \
SMC_outw(x, ioaddr, RPC_REG(lp)); \
@@ -1267,7 +1280,7 @@
#define SMC_PUT_PKT_HDR(lp, status, length) \
do { \
- if (SMC_CAN_USE_32BIT) \
+ if (SMC_32BIT(lp)) \
SMC_outl((status) | (length)<<16, ioaddr, \
DATA_REG(lp)); \
else { \
@@ -1278,7 +1291,7 @@
#define SMC_GET_PKT_HDR(lp, status, length) \
do { \
- if (SMC_CAN_USE_32BIT) { \
+ if (SMC_32BIT(lp)) { \
unsigned int __val = SMC_inl(ioaddr, DATA_REG(lp)); \
(status) = __val & 0xffff; \
(length) = __val >> 16; \
@@ -1290,7 +1303,7 @@
#define SMC_PUSH_DATA(lp, p, l) \
do { \
- if (SMC_CAN_USE_32BIT) { \
+ if (SMC_32BIT(lp)) { \
void *__ptr = (p); \
int __len = (l); \
void __iomem *__ioaddr = ioaddr; \
@@ -1308,15 +1321,15 @@
SMC_outw(*((u16 *)__ptr), ioaddr, \
DATA_REG(lp)); \
} \
- } else if (SMC_CAN_USE_16BIT) \
+ } else if (SMC_16BIT(lp)) \
SMC_outsw(ioaddr, DATA_REG(lp), p, (l) >> 1); \
- else if (SMC_CAN_USE_8BIT) \
+ else if (SMC_8BIT(lp)) \
SMC_outsb(ioaddr, DATA_REG(lp), p, l); \
} while (0)
#define SMC_PULL_DATA(lp, p, l) \
do { \
- if (SMC_CAN_USE_32BIT) { \
+ if (SMC_32BIT(lp)) { \
void *__ptr = (p); \
int __len = (l); \
void __iomem *__ioaddr = ioaddr; \
@@ -1343,9 +1356,9 @@
__ioaddr = lp->datacs; \
__len += 2; \
SMC_insl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \
- } else if (SMC_CAN_USE_16BIT) \
+ } else if (SMC_16BIT(lp)) \
SMC_insw(ioaddr, DATA_REG(lp), p, (l) >> 1); \
- else if (SMC_CAN_USE_8BIT) \
+ else if (SMC_8BIT(lp)) \
SMC_insb(ioaddr, DATA_REG(lp), p, l); \
} while (0)