rtl8180: add TX queue mapping and support for rtl8187se
This patch adds tx queue mapping for rtl8187se and a long comment
block about their usages.
It adapts the TX function to use that map and it sets properly
the TX descriptor rtl8187se-only fields
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index cce972d..eb86ede 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -85,6 +85,52 @@
{ .center_freq = 2484 },
};
+/* Queues for rtl8187se card
+ *
+ * name | reg | queue
+ * BC | 7 | 6
+ * MG | 1 | 0
+ * HI | 6 | 1
+ * VO | 5 | 2
+ * VI | 4 | 3
+ * BE | 3 | 4
+ * BK | 2 | 5
+ *
+ * The complete map for DMA kick reg using use all queue is:
+ * static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] =
+ * {1, 6, 5, 4, 3, 2, 7};
+ *
+ * .. but.. Because for mac80211 4 queues are enough for QoS we use this
+ *
+ * name | reg | queue
+ * BC | 7 | 4 <- currently not used yet
+ * MG | 1 | x <- Not used
+ * HI | 6 | x <- Not used
+ * VO | 5 | 0 <- used
+ * VI | 4 | 1 <- used
+ * BE | 3 | 2 <- used
+ * BK | 2 | 3 <- used
+ *
+ * Beacon queue could be used, but this is not finished yet.
+ *
+ * I thougth about using the other two queues but I decided not to do this:
+ *
+ * - I'm unsure whether the mac80211 will ever try to use more than 4 queues
+ * by itself.
+ *
+ * - I could route MGMT frames (currently sent over VO queue) to the MGMT
+ * queue but since mac80211 will do not know about it, I will probably gain
+ * some HW priority whenever the VO queue is not empty, but this gain is
+ * limited by the fact that I had to stop the mac80211 queue whenever one of
+ * the VO or MGMT queues is full, stopping also submitting of MGMT frame
+ * to the driver.
+ *
+ * - I don't know how to set in the HW the contention window params for MGMT
+ * and HI-prio queues.
+ */
+
+static const int rtl8187se_queues_map[RTL8187SE_NR_TX_QUEUES] = {5, 4, 3, 2, 7};
+
/* Queues for rtl8180/rtl8185 cards
*
* name | reg | prio
@@ -358,6 +404,8 @@
u8 rc_flags;
u16 plcp_len = 0;
__le16 rts_duration = 0;
+ /* do arithmetic and then convert to le16 */
+ u16 frame_duration = 0;
prio = skb_get_queue_mapping(skb);
ring = &priv->tx_ring[prio];
@@ -369,7 +417,6 @@
kfree_skb(skb);
dev_err(&priv->pdev->dev, "TX DMA mapping error\n");
return;
-
}
tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS |
@@ -405,6 +452,18 @@
plcp_len |= 1 << 15;
}
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ __le16 duration;
+ /* SIFS time (required by HW) is already included by
+ * ieee80211_generic_frame_duration
+ */
+ duration = ieee80211_generic_frame_duration(dev, priv->vif,
+ IEEE80211_BAND_2GHZ, skb->len,
+ ieee80211_get_tx_rate(dev, info));
+
+ frame_duration = priv->ack_time + le16_to_cpu(duration);
+ }
+
spin_lock_irqsave(&priv->lock, flags);
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
@@ -417,10 +476,19 @@
idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
entry = &ring->desc[idx];
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ entry->frame_duration = cpu_to_le16(frame_duration);
+ entry->frame_len_se = cpu_to_le16(skb->len);
+
+ /* tpc polarity */
+ entry->flags3 = cpu_to_le16(1<<4);
+ } else
+ entry->frame_len = cpu_to_le32(skb->len);
+
entry->rts_duration = rts_duration;
entry->plcp_len = cpu_to_le16(plcp_len);
entry->tx_buf = cpu_to_le32(mapping);
- entry->frame_len = cpu_to_le32(skb->len);
+
entry->flags2 = info->control.rates[1].idx >= 0 ?
ieee80211_get_alt_retry_rate(dev, info, 0)->bitrate << 4 : 0;
entry->retry_limit = info->control.rates[0].count;
@@ -442,11 +510,17 @@
spin_unlock_irqrestore(&priv->lock, flags);
- hw_prio = rtl8180_queues_map[prio];
-
- rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ /* just poll: rings are stopped with TPPollStop reg */
+ hw_prio = rtl8187se_queues_map[prio];
+ rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
+ (1 << hw_prio));
+ } else {
+ hw_prio = rtl8180_queues_map[prio];
+ rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING,
(1 << hw_prio) | /* ring to poll */
(1<<1) | (1<<2));/* stopped rings */
+ }
}
void rtl8180_set_anaparam(struct rtl8180_priv *priv, u32 anaparam)
diff --git a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index d866cc6..d64e75d 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
@@ -29,6 +29,14 @@
*/
#define RTL8180_NR_TX_QUEUES 2
+/* rtl8187SE have 6 queues + beacon queues
+ * mac80211 can use 4 QoS data queue, + beacon = 5 tot
+ */
+#define RTL8187SE_NR_TX_QUEUES 5
+
+/* for array static allocation, it is the max of above */
+#define RTL818X_NR_TX_QUEUES 5
+
struct rtl8180_tx_desc {
__le32 flags;
__le16 rts_duration;
@@ -105,7 +113,7 @@
dma_addr_t rx_ring_dma;
unsigned int rx_idx;
struct sk_buff *rx_buf[32];
- struct rtl8180_tx_ring tx_ring[RTL8180_NR_TX_QUEUES];
+ struct rtl8180_tx_ring tx_ring[RTL818X_NR_TX_QUEUES];
struct ieee80211_channel channels[14];
struct ieee80211_rate rates[12];
struct ieee80211_supported_band band;