| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called COPYING. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| *****************************************************************************/ |
| |
| #ifndef __iwl_fw_file_h__ |
| #define __iwl_fw_file_h__ |
| |
| #include <linux/netdevice.h> |
| #include <linux/nl80211.h> |
| |
| /* v1/v2 uCode file layout */ |
| struct iwl_ucode_header { |
| __le32 ver; /* major/minor/API/serial */ |
| union { |
| struct { |
| __le32 inst_size; /* bytes of runtime code */ |
| __le32 data_size; /* bytes of runtime data */ |
| __le32 init_size; /* bytes of init code */ |
| __le32 init_data_size; /* bytes of init data */ |
| __le32 boot_size; /* bytes of bootstrap code */ |
| u8 data[0]; /* in same order as sizes */ |
| } v1; |
| struct { |
| __le32 build; /* build number */ |
| __le32 inst_size; /* bytes of runtime code */ |
| __le32 data_size; /* bytes of runtime data */ |
| __le32 init_size; /* bytes of init code */ |
| __le32 init_data_size; /* bytes of init data */ |
| __le32 boot_size; /* bytes of bootstrap code */ |
| u8 data[0]; /* in same order as sizes */ |
| } v2; |
| } u; |
| }; |
| |
| /* |
| * new TLV uCode file layout |
| * |
| * The new TLV file format contains TLVs, that each specify |
| * some piece of data. |
| */ |
| |
| enum iwl_ucode_tlv_type { |
| IWL_UCODE_TLV_INVALID = 0, /* unused */ |
| IWL_UCODE_TLV_INST = 1, |
| IWL_UCODE_TLV_DATA = 2, |
| IWL_UCODE_TLV_INIT = 3, |
| IWL_UCODE_TLV_INIT_DATA = 4, |
| IWL_UCODE_TLV_BOOT = 5, |
| IWL_UCODE_TLV_PROBE_MAX_LEN = 6, /* a u32 value */ |
| IWL_UCODE_TLV_PAN = 7, |
| IWL_UCODE_TLV_RUNT_EVTLOG_PTR = 8, |
| IWL_UCODE_TLV_RUNT_EVTLOG_SIZE = 9, |
| IWL_UCODE_TLV_RUNT_ERRLOG_PTR = 10, |
| IWL_UCODE_TLV_INIT_EVTLOG_PTR = 11, |
| IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12, |
| IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13, |
| IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14, |
| IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15, |
| IWL_UCODE_TLV_WOWLAN_INST = 16, |
| IWL_UCODE_TLV_WOWLAN_DATA = 17, |
| IWL_UCODE_TLV_FLAGS = 18, |
| IWL_UCODE_TLV_SEC_RT = 19, |
| IWL_UCODE_TLV_SEC_INIT = 20, |
| IWL_UCODE_TLV_SEC_WOWLAN = 21, |
| IWL_UCODE_TLV_DEF_CALIB = 22, |
| IWL_UCODE_TLV_PHY_SKU = 23, |
| IWL_UCODE_TLV_SECURE_SEC_RT = 24, |
| IWL_UCODE_TLV_SECURE_SEC_INIT = 25, |
| IWL_UCODE_TLV_SECURE_SEC_WOWLAN = 26, |
| IWL_UCODE_TLV_NUM_OF_CPU = 27, |
| IWL_UCODE_TLV_CSCHEME = 28, |
| IWL_UCODE_TLV_API_CHANGES_SET = 29, |
| IWL_UCODE_TLV_ENABLED_CAPABILITIES = 30, |
| IWL_UCODE_TLV_N_SCAN_CHANNELS = 31, |
| IWL_UCODE_TLV_PAGING = 32, |
| IWL_UCODE_TLV_SEC_RT_USNIFFER = 34, |
| IWL_UCODE_TLV_SDIO_ADMA_ADDR = 35, |
| IWL_UCODE_TLV_FW_VERSION = 36, |
| IWL_UCODE_TLV_FW_DBG_DEST = 38, |
| IWL_UCODE_TLV_FW_DBG_CONF = 39, |
| IWL_UCODE_TLV_FW_DBG_TRIGGER = 40, |
| IWL_UCODE_TLV_FW_GSCAN_CAPA = 50, |
| }; |
| |
| struct iwl_ucode_tlv { |
| __le32 type; /* see above */ |
| __le32 length; /* not including type/length fields */ |
| u8 data[0]; |
| }; |
| |
| #define IWL_TLV_UCODE_MAGIC 0x0a4c5749 |
| #define FW_VER_HUMAN_READABLE_SZ 64 |
| |
| struct iwl_tlv_ucode_header { |
| /* |
| * The TLV style ucode header is distinguished from |
| * the v1/v2 style header by first four bytes being |
| * zero, as such is an invalid combination of |
| * major/minor/API/serial versions. |
| */ |
| __le32 zero; |
| __le32 magic; |
| u8 human_readable[FW_VER_HUMAN_READABLE_SZ]; |
| /* major/minor/API/serial or major in new format */ |
| __le32 ver; |
| __le32 build; |
| __le64 ignore; |
| /* |
| * The data contained herein has a TLV layout, |
| * see above for the TLV header and types. |
| * Note that each TLV is padded to a length |
| * that is a multiple of 4 for alignment. |
| */ |
| u8 data[0]; |
| }; |
| |
| /* |
| * ucode TLVs |
| * |
| * ability to get extension for: flags & capabilities from ucode binaries files |
| */ |
| struct iwl_ucode_api { |
| __le32 api_index; |
| __le32 api_flags; |
| } __packed; |
| |
| struct iwl_ucode_capa { |
| __le32 api_index; |
| __le32 api_capa; |
| } __packed; |
| |
| /** |
| * enum iwl_ucode_tlv_flag - ucode API flags |
| * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously |
| * was a separate TLV but moved here to save space. |
| * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID, |
| * treats good CRC threshold as a boolean |
| * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). |
| * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P. |
| * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS |
| * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD |
| * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan |
| * offload profile config command. |
| * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six |
| * (rather than two) IPv6 addresses |
| * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element |
| * from the probe request template. |
| * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version) |
| * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) |
| * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC |
| * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and |
| * P2P client interfaces simultaneously if they are in different bindings. |
| * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and |
| * P2P client interfaces simultaneously if they are in same bindings. |
| * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD |
| * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save |
| * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering. |
| * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients |
| * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS. |
| */ |
| enum iwl_ucode_tlv_flag { |
| IWL_UCODE_TLV_FLAGS_PAN = BIT(0), |
| IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1), |
| IWL_UCODE_TLV_FLAGS_MFP = BIT(2), |
| IWL_UCODE_TLV_FLAGS_P2P = BIT(3), |
| IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4), |
| IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7), |
| IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10), |
| IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12), |
| IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15), |
| IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16), |
| IWL_UCODE_TLV_FLAGS_P2P_PM = BIT(21), |
| IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22), |
| IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM = BIT(23), |
| IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24), |
| IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25), |
| IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26), |
| IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29), |
| IWL_UCODE_TLV_FLAGS_GO_UAPSD = BIT(30), |
| }; |
| |
| typedef unsigned int __bitwise__ iwl_ucode_tlv_api_t; |
| |
| /** |
| * enum iwl_ucode_tlv_api - ucode api |
| * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex |
| * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time |
| * longer than the passive one, which is essential for fragmented scan. |
| * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. |
| * IWL_UCODE_TLV_API_HDC_PHASE_0: ucode supports finer configuration of LTR |
| * @IWL_UCODE_TLV_API_TX_POWER_DEV: new API for tx power. |
| * @IWL_UCODE_TLV_API_WIDE_CMD_HDR: ucode supports wide command header |
| * @IWL_UCODE_TLV_API_SCD_CFG: This firmware can configure the scheduler |
| * through the dedicated host command. |
| * @IWL_UCODE_TLV_API_SINGLE_SCAN_EBS: EBS is supported for single scans too. |
| * @IWL_UCODE_TLV_API_ASYNC_DTM: Async temperature notifications are supported. |
| * @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params |
| * @IWL_UCODE_TLV_API_STATS_V10: uCode supports/uses statistics API version 10 |
| * @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format |
| * @IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY: scan APIs use 8-level priority |
| * instead of 3. |
| * @IWL_UCODE_TLV_API_TX_POWER_CHAIN: TX power API has larger command size |
| * (command version 3) that supports per-chain limits |
| */ |
| enum iwl_ucode_tlv_api { |
| IWL_UCODE_TLV_API_BT_COEX_SPLIT = (__force iwl_ucode_tlv_api_t)3, |
| IWL_UCODE_TLV_API_FRAGMENTED_SCAN = (__force iwl_ucode_tlv_api_t)8, |
| IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = (__force iwl_ucode_tlv_api_t)9, |
| IWL_UCODE_TLV_API_HDC_PHASE_0 = (__force iwl_ucode_tlv_api_t)10, |
| IWL_UCODE_TLV_API_TX_POWER_DEV = (__force iwl_ucode_tlv_api_t)11, |
| IWL_UCODE_TLV_API_WIDE_CMD_HDR = (__force iwl_ucode_tlv_api_t)14, |
| IWL_UCODE_TLV_API_SCD_CFG = (__force iwl_ucode_tlv_api_t)15, |
| IWL_UCODE_TLV_API_SINGLE_SCAN_EBS = (__force iwl_ucode_tlv_api_t)16, |
| IWL_UCODE_TLV_API_ASYNC_DTM = (__force iwl_ucode_tlv_api_t)17, |
| IWL_UCODE_TLV_API_LQ_SS_PARAMS = (__force iwl_ucode_tlv_api_t)18, |
| IWL_UCODE_TLV_API_STATS_V10 = (__force iwl_ucode_tlv_api_t)19, |
| IWL_UCODE_TLV_API_NEW_VERSION = (__force iwl_ucode_tlv_api_t)20, |
| IWL_UCODE_TLV_API_EXT_SCAN_PRIORITY = (__force iwl_ucode_tlv_api_t)24, |
| IWL_UCODE_TLV_API_TX_POWER_CHAIN = (__force iwl_ucode_tlv_api_t)27, |
| }; |
| |
| typedef unsigned int __bitwise__ iwl_ucode_tlv_capa_t; |
| |
| /** |
| * enum iwl_ucode_tlv_capa - ucode capabilities |
| * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3 |
| * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory |
| * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan. |
| * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer |
| * @IWL_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM) |
| * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality |
| * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current |
| * tx power value into TPC Report action frame and Link Measurement Report |
| * action frame |
| * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current |
| * channel in DS parameter set element in probe requests. |
| * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in |
| * probe requests. |
| * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests |
| * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA), |
| * which also implies support for the scheduler configuration command |
| * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching |
| * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command |
| * @IWL_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command |
| * @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload |
| * @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics |
| * @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running |
| * @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different |
| * sources for the MCC. This TLV bit is a future replacement to |
| * IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR |
| * is supported. |
| * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC |
| * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan |
| */ |
| enum iwl_ucode_tlv_capa { |
| IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = (__force iwl_ucode_tlv_capa_t)0, |
| IWL_UCODE_TLV_CAPA_LAR_SUPPORT = (__force iwl_ucode_tlv_capa_t)1, |
| IWL_UCODE_TLV_CAPA_UMAC_SCAN = (__force iwl_ucode_tlv_capa_t)2, |
| IWL_UCODE_TLV_CAPA_BEAMFORMER = (__force iwl_ucode_tlv_capa_t)3, |
| IWL_UCODE_TLV_CAPA_TOF_SUPPORT = (__force iwl_ucode_tlv_capa_t)5, |
| IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = (__force iwl_ucode_tlv_capa_t)6, |
| IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = (__force iwl_ucode_tlv_capa_t)8, |
| IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)9, |
| IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)10, |
| IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = (__force iwl_ucode_tlv_capa_t)11, |
| IWL_UCODE_TLV_CAPA_DQA_SUPPORT = (__force iwl_ucode_tlv_capa_t)12, |
| IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = (__force iwl_ucode_tlv_capa_t)13, |
| IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = (__force iwl_ucode_tlv_capa_t)18, |
| IWL_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT = (__force iwl_ucode_tlv_capa_t)19, |
| IWL_UCODE_TLV_CAPA_CSUM_SUPPORT = (__force iwl_ucode_tlv_capa_t)21, |
| IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS = (__force iwl_ucode_tlv_capa_t)22, |
| IWL_UCODE_TLV_CAPA_BT_COEX_PLCR = (__force iwl_ucode_tlv_capa_t)28, |
| IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = (__force iwl_ucode_tlv_capa_t)29, |
| IWL_UCODE_TLV_CAPA_BT_COEX_RRC = (__force iwl_ucode_tlv_capa_t)30, |
| IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)31, |
| }; |
| |
| /* The default calibrate table size if not specified by firmware file */ |
| #define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 |
| #define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19 |
| #define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253 |
| |
| /* The default max probe length if not specified by the firmware file */ |
| #define IWL_DEFAULT_MAX_PROBE_LENGTH 200 |
| |
| #define IWL_API_MAX_BITS 64 |
| #define IWL_CAPABILITIES_MAX_BITS 64 |
| |
| /* |
| * For 16.0 uCode and above, there is no differentiation between sections, |
| * just an offset to the HW address. |
| */ |
| #define IWL_UCODE_SECTION_MAX 16 |
| #define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC |
| #define PAGING_SEPARATOR_SECTION 0xAAAABBBB |
| |
| /* uCode version contains 4 values: Major/Minor/API/Serial */ |
| #define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) |
| #define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) |
| #define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) |
| #define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) |
| |
| /* |
| * Calibration control struct. |
| * Sent as part of the phy configuration command. |
| * @flow_trigger: bitmap for which calibrations to perform according to |
| * flow triggers. |
| * @event_trigger: bitmap for which calibrations to perform according to |
| * event triggers. |
| */ |
| struct iwl_tlv_calib_ctrl { |
| __le32 flow_trigger; |
| __le32 event_trigger; |
| } __packed; |
| |
| enum iwl_fw_phy_cfg { |
| FW_PHY_CFG_RADIO_TYPE_POS = 0, |
| FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS, |
| FW_PHY_CFG_RADIO_STEP_POS = 2, |
| FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS, |
| FW_PHY_CFG_RADIO_DASH_POS = 4, |
| FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS, |
| FW_PHY_CFG_TX_CHAIN_POS = 16, |
| FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS, |
| FW_PHY_CFG_RX_CHAIN_POS = 20, |
| FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS, |
| }; |
| |
| #define IWL_UCODE_MAX_CS 1 |
| |
| /** |
| * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW. |
| * @cipher: a cipher suite selector |
| * @flags: cipher scheme flags (currently reserved for a future use) |
| * @hdr_len: a size of MPDU security header |
| * @pn_len: a size of PN |
| * @pn_off: an offset of pn from the beginning of the security header |
| * @key_idx_off: an offset of key index byte in the security header |
| * @key_idx_mask: a bit mask of key_idx bits |
| * @key_idx_shift: bit shift needed to get key_idx |
| * @mic_len: mic length in bytes |
| * @hw_cipher: a HW cipher index used in host commands |
| */ |
| struct iwl_fw_cipher_scheme { |
| __le32 cipher; |
| u8 flags; |
| u8 hdr_len; |
| u8 pn_len; |
| u8 pn_off; |
| u8 key_idx_off; |
| u8 key_idx_mask; |
| u8 key_idx_shift; |
| u8 mic_len; |
| u8 hw_cipher; |
| } __packed; |
| |
| enum iwl_fw_dbg_reg_operator { |
| CSR_ASSIGN, |
| CSR_SETBIT, |
| CSR_CLEARBIT, |
| |
| PRPH_ASSIGN, |
| PRPH_SETBIT, |
| PRPH_CLEARBIT, |
| |
| INDIRECT_ASSIGN, |
| INDIRECT_SETBIT, |
| INDIRECT_CLEARBIT, |
| |
| PRPH_BLOCKBIT, |
| }; |
| |
| /** |
| * struct iwl_fw_dbg_reg_op - an operation on a register |
| * |
| * @op: %enum iwl_fw_dbg_reg_operator |
| * @addr: offset of the register |
| * @val: value |
| */ |
| struct iwl_fw_dbg_reg_op { |
| u8 op; |
| u8 reserved[3]; |
| __le32 addr; |
| __le32 val; |
| } __packed; |
| |
| /** |
| * enum iwl_fw_dbg_monitor_mode - available monitor recording modes |
| * |
| * @SMEM_MODE: monitor stores the data in SMEM |
| * @EXTERNAL_MODE: monitor stores the data in allocated DRAM |
| * @MARBH_MODE: monitor stores the data in MARBH buffer |
| * @MIPI_MODE: monitor outputs the data through the MIPI interface |
| */ |
| enum iwl_fw_dbg_monitor_mode { |
| SMEM_MODE = 0, |
| EXTERNAL_MODE = 1, |
| MARBH_MODE = 2, |
| MIPI_MODE = 3, |
| }; |
| |
| /** |
| * struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data |
| * |
| * @version: version of the TLV - currently 0 |
| * @monitor_mode: %enum iwl_fw_dbg_monitor_mode |
| * @size_power: buffer size will be 2^(size_power + 11) |
| * @base_reg: addr of the base addr register (PRPH) |
| * @end_reg: addr of the end addr register (PRPH) |
| * @write_ptr_reg: the addr of the reg of the write pointer |
| * @wrap_count: the addr of the reg of the wrap_count |
| * @base_shift: shift right of the base addr reg |
| * @end_shift: shift right of the end addr reg |
| * @reg_ops: array of registers operations |
| * |
| * This parses IWL_UCODE_TLV_FW_DBG_DEST |
| */ |
| struct iwl_fw_dbg_dest_tlv { |
| u8 version; |
| u8 monitor_mode; |
| u8 size_power; |
| u8 reserved; |
| __le32 base_reg; |
| __le32 end_reg; |
| __le32 write_ptr_reg; |
| __le32 wrap_count; |
| u8 base_shift; |
| u8 end_shift; |
| struct iwl_fw_dbg_reg_op reg_ops[0]; |
| } __packed; |
| |
| struct iwl_fw_dbg_conf_hcmd { |
| u8 id; |
| u8 reserved; |
| __le16 len; |
| u8 data[0]; |
| } __packed; |
| |
| /** |
| * enum iwl_fw_dbg_trigger_mode - triggers functionalities |
| * |
| * @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism |
| * @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data |
| * @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to |
| * collect only monitor data |
| */ |
| enum iwl_fw_dbg_trigger_mode { |
| IWL_FW_DBG_TRIGGER_START = BIT(0), |
| IWL_FW_DBG_TRIGGER_STOP = BIT(1), |
| IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2), |
| }; |
| |
| /** |
| * enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger |
| * @IWL_FW_DBG_CONF_VIF_ANY: any vif type |
| * @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode |
| * @IWL_FW_DBG_CONF_VIF_STATION: BSS mode |
| * @IWL_FW_DBG_CONF_VIF_AP: AP mode |
| * @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode |
| * @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode |
| * @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device |
| */ |
| enum iwl_fw_dbg_trigger_vif_type { |
| IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED, |
| IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC, |
| IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION, |
| IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP, |
| IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT, |
| IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO, |
| IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE, |
| }; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger |
| * @id: %enum iwl_fw_dbg_trigger |
| * @vif_type: %enum iwl_fw_dbg_trigger_vif_type |
| * @stop_conf_ids: bitmap of configurations this trigger relates to. |
| * if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding |
| * to the currently running configuration is set, the data should be |
| * collected. |
| * @stop_delay: how many milliseconds to wait before collecting the data |
| * after the STOP trigger fires. |
| * @mode: %enum iwl_fw_dbg_trigger_mode - can be stop / start of both |
| * @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what |
| * configuration should be applied when the triggers kicks in. |
| * @occurrences: number of occurrences. 0 means the trigger will never fire. |
| */ |
| struct iwl_fw_dbg_trigger_tlv { |
| __le32 id; |
| __le32 vif_type; |
| __le32 stop_conf_ids; |
| __le32 stop_delay; |
| u8 mode; |
| u8 start_conf_id; |
| __le16 occurrences; |
| __le32 reserved[2]; |
| |
| u8 data[0]; |
| } __packed; |
| |
| #define FW_DBG_START_FROM_ALIVE 0 |
| #define FW_DBG_CONF_MAX 32 |
| #define FW_DBG_INVALID 0xff |
| |
| /** |
| * struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons |
| * @stop_consec_missed_bcon: stop recording if threshold is crossed. |
| * @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed. |
| * @start_consec_missed_bcon: start recording if threshold is crossed. |
| * @start_consec_missed_bcon_since_rx: start recording if threshold is crossed. |
| * @reserved1: reserved |
| * @reserved2: reserved |
| */ |
| struct iwl_fw_dbg_trigger_missed_bcon { |
| __le32 stop_consec_missed_bcon; |
| __le32 stop_consec_missed_bcon_since_rx; |
| __le32 reserved2[2]; |
| __le32 start_consec_missed_bcon; |
| __le32 start_consec_missed_bcon_since_rx; |
| __le32 reserved1[2]; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW. |
| * cmds: the list of commands to trigger the collection on |
| */ |
| struct iwl_fw_dbg_trigger_cmd { |
| struct cmd { |
| u8 cmd_id; |
| u8 group_id; |
| } __packed cmds[16]; |
| } __packed; |
| |
| /** |
| * iwl_fw_dbg_trigger_stats - configures trigger for statistics |
| * @stop_offset: the offset of the value to be monitored |
| * @stop_threshold: the threshold above which to collect |
| * @start_offset: the offset of the value to be monitored |
| * @start_threshold: the threshold above which to start recording |
| */ |
| struct iwl_fw_dbg_trigger_stats { |
| __le32 stop_offset; |
| __le32 stop_threshold; |
| __le32 start_offset; |
| __le32 start_threshold; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI |
| * @rssi: RSSI value to trigger at |
| */ |
| struct iwl_fw_dbg_trigger_low_rssi { |
| __le32 rssi; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events |
| * @stop_auth_denied: number of denied authentication to collect |
| * @stop_auth_timeout: number of authentication timeout to collect |
| * @stop_rx_deauth: number of Rx deauth before to collect |
| * @stop_tx_deauth: number of Tx deauth before to collect |
| * @stop_assoc_denied: number of denied association to collect |
| * @stop_assoc_timeout: number of association timeout to collect |
| * @stop_connection_loss: number of connection loss to collect |
| * @start_auth_denied: number of denied authentication to start recording |
| * @start_auth_timeout: number of authentication timeout to start recording |
| * @start_rx_deauth: number of Rx deauth to start recording |
| * @start_tx_deauth: number of Tx deauth to start recording |
| * @start_assoc_denied: number of denied association to start recording |
| * @start_assoc_timeout: number of association timeout to start recording |
| * @start_connection_loss: number of connection loss to start recording |
| */ |
| struct iwl_fw_dbg_trigger_mlme { |
| u8 stop_auth_denied; |
| u8 stop_auth_timeout; |
| u8 stop_rx_deauth; |
| u8 stop_tx_deauth; |
| |
| u8 stop_assoc_denied; |
| u8 stop_assoc_timeout; |
| u8 stop_connection_loss; |
| u8 reserved; |
| |
| u8 start_auth_denied; |
| u8 start_auth_timeout; |
| u8 start_rx_deauth; |
| u8 start_tx_deauth; |
| |
| u8 start_assoc_denied; |
| u8 start_assoc_timeout; |
| u8 start_connection_loss; |
| u8 reserved2; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer |
| * @command_queue: timeout for the command queue in ms |
| * @bss: timeout for the queues of a BSS (except for TDLS queues) in ms |
| * @softap: timeout for the queues of a softAP in ms |
| * @p2p_go: timeout for the queues of a P2P GO in ms |
| * @p2p_client: timeout for the queues of a P2P client in ms |
| * @p2p_device: timeout for the queues of a P2P device in ms |
| * @ibss: timeout for the queues of an IBSS in ms |
| * @tdls: timeout for the queues of a TDLS station in ms |
| */ |
| struct iwl_fw_dbg_trigger_txq_timer { |
| __le32 command_queue; |
| __le32 bss; |
| __le32 softap; |
| __le32 p2p_go; |
| __le32 p2p_client; |
| __le32 p2p_device; |
| __le32 ibss; |
| __le32 tdls; |
| __le32 reserved[4]; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger |
| * time_Events: a list of tuples <id, action_bitmap>. The driver will issue a |
| * trigger each time a time event notification that relates to time event |
| * id with one of the actions in the bitmap is received and |
| * BIT(notif->status) is set in status_bitmap. |
| * |
| */ |
| struct iwl_fw_dbg_trigger_time_event { |
| struct { |
| __le32 id; |
| __le32 action_bitmap; |
| __le32 status_bitmap; |
| } __packed time_events[16]; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger |
| * rx_ba_start: tid bitmap to configure on what tid the trigger should occur |
| * when an Rx BlockAck session is started. |
| * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur |
| * when an Rx BlockAck session is stopped. |
| * tx_ba_start: tid bitmap to configure on what tid the trigger should occur |
| * when a Tx BlockAck session is started. |
| * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur |
| * when a Tx BlockAck session is stopped. |
| * rx_bar: tid bitmap to configure on what tid the trigger should occur |
| * when a BAR is received (for a Tx BlockAck session). |
| * tx_bar: tid bitmap to configure on what tid the trigger should occur |
| * when a BAR is send (for an Rx BlocAck session). |
| * frame_timeout: tid bitmap to configure on what tid the trigger should occur |
| * when a frame times out in the reodering buffer. |
| */ |
| struct iwl_fw_dbg_trigger_ba { |
| __le16 rx_ba_start; |
| __le16 rx_ba_stop; |
| __le16 tx_ba_start; |
| __le16 tx_ba_stop; |
| __le16 rx_bar; |
| __le16 tx_bar; |
| __le16 frame_timeout; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration. |
| * @id: conf id |
| * @usniffer: should the uSniffer image be used |
| * @num_of_hcmds: how many HCMDs to send are present here |
| * @hcmd: a variable length host command to be sent to apply the configuration. |
| * If there is more than one HCMD to send, they will appear one after the |
| * other and be sent in the order that they appear in. |
| * This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to |
| * %FW_DBG_CONF_MAX configuration per run. |
| */ |
| struct iwl_fw_dbg_conf_tlv { |
| u8 id; |
| u8 usniffer; |
| u8 reserved; |
| u8 num_of_hcmds; |
| struct iwl_fw_dbg_conf_hcmd hcmd; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_gscan_capabilities - gscan capabilities supported by FW |
| * @max_scan_cache_size: total space allocated for scan results (in bytes). |
| * @max_scan_buckets: maximum number of channel buckets. |
| * @max_ap_cache_per_scan: maximum number of APs that can be stored per scan. |
| * @max_rssi_sample_size: number of RSSI samples used for averaging RSSI. |
| * @max_scan_reporting_threshold: max possible report threshold. in percentage. |
| * @max_hotlist_aps: maximum number of entries for hotlist APs. |
| * @max_significant_change_aps: maximum number of entries for significant |
| * change APs. |
| * @max_bssid_history_entries: number of BSSID/RSSI entries that the device can |
| * hold. |
| */ |
| struct iwl_fw_gscan_capabilities { |
| __le32 max_scan_cache_size; |
| __le32 max_scan_buckets; |
| __le32 max_ap_cache_per_scan; |
| __le32 max_rssi_sample_size; |
| __le32 max_scan_reporting_threshold; |
| __le32 max_hotlist_aps; |
| __le32 max_significant_change_aps; |
| __le32 max_bssid_history_entries; |
| } __packed; |
| |
| #endif /* __iwl_fw_file_h__ */ |