diff --git a/net/mac80211/mesh_ps.c b/net/mac80211/mesh_ps.c
new file mode 100644
index 0000000..b677962
--- /dev/null
+++ b/net/mac80211/mesh_ps.c
@@ -0,0 +1,585 @@
+/*
+ * Copyright 2012-2013, Marco Porsch <marco.porsch@s2005.tu-chemnitz.de>
+ * Copyright 2012-2013, cozybit Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "mesh.h"
+#include "wme.h"
+
+
+/* mesh PS management */
+
+/**
+ * mps_qos_null_get - create pre-addressed QoS Null frame for mesh powersave
+ */
+static struct sk_buff *mps_qos_null_get(struct sta_info *sta)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_hdr *nullfunc; /* use 4addr header */
+	struct sk_buff *skb;
+	int size = sizeof(*nullfunc);
+	__le16 fc;
+
+	skb = dev_alloc_skb(local->hw.extra_tx_headroom + size + 2);
+	if (!skb)
+		return NULL;
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+
+	nullfunc = (struct ieee80211_hdr *) skb_put(skb, size);
+	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC);
+	ieee80211_fill_mesh_addresses(nullfunc, &fc, sta->sta.addr,
+				      sdata->vif.addr);
+	nullfunc->frame_control = fc;
+	nullfunc->duration_id = 0;
+	/* no address resolution for this frame -> set addr 1 immediately */
+	memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN);
+	memset(skb_put(skb, 2), 0, 2); /* append QoS control field */
+	ieee80211_mps_set_frame_flags(sdata, sta, nullfunc);
+
+	return skb;
+}
+
+/**
+ * mps_qos_null_tx - send a QoS Null to indicate link-specific power mode
+ */
+static void mps_qos_null_tx(struct sta_info *sta)
+{
+	struct sk_buff *skb;
+
+	skb = mps_qos_null_get(sta);
+	if (!skb)
+		return;
+
+	mps_dbg(sta->sdata, "announcing peer-specific power mode to %pM\n",
+		sta->sta.addr);
+
+	/* don't unintentionally start a MPSP */
+	if (!test_sta_flag(sta, WLAN_STA_PS_STA)) {
+		u8 *qc = ieee80211_get_qos_ctl((void *) skb->data);
+
+		qc[0] |= IEEE80211_QOS_CTL_EOSP;
+	}
+
+	ieee80211_tx_skb(sta->sdata, skb);
+}
+
+/**
+ * ieee80211_mps_local_status_update - track status of local link-specific PMs
+ *
+ * @sdata: local mesh subif
+ *
+ * sets the non-peer power mode and triggers the driver PS (re-)configuration
+ */
+void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+	struct sta_info *sta;
+	bool peering = false;
+	int light_sleep_cnt = 0;
+	int deep_sleep_cnt = 0;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) {
+		if (sdata != sta->sdata)
+			continue;
+
+		switch (sta->plink_state) {
+		case NL80211_PLINK_OPN_SNT:
+		case NL80211_PLINK_OPN_RCVD:
+		case NL80211_PLINK_CNF_RCVD:
+			peering = true;
+			break;
+		case NL80211_PLINK_ESTAB:
+			if (sta->local_pm == NL80211_MESH_POWER_LIGHT_SLEEP)
+				light_sleep_cnt++;
+			else if (sta->local_pm == NL80211_MESH_POWER_DEEP_SLEEP)
+				deep_sleep_cnt++;
+			break;
+		default:
+			break;
+		}
+	}
+	rcu_read_unlock();
+
+	/*
+	 * Set non-peer mode to active during peering/scanning/authentication
+	 * (see IEEE802.11-2012 13.14.8.3). The non-peer mesh power mode is
+	 * deep sleep if the local STA is in light or deep sleep towards at
+	 * least one mesh peer (see 13.14.3.1). Otherwise, set it to the
+	 * user-configured default value.
+	 */
+	if (peering) {
+		mps_dbg(sdata, "setting non-peer PM to active for peering\n");
+		ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE;
+	} else if (light_sleep_cnt || deep_sleep_cnt) {
+		mps_dbg(sdata, "setting non-peer PM to deep sleep\n");
+		ifmsh->nonpeer_pm = NL80211_MESH_POWER_DEEP_SLEEP;
+	} else {
+		mps_dbg(sdata, "setting non-peer PM to user value\n");
+		ifmsh->nonpeer_pm = ifmsh->mshcfg.power_mode;
+	}
+
+	ifmsh->ps_peers_light_sleep = light_sleep_cnt;
+	ifmsh->ps_peers_deep_sleep = deep_sleep_cnt;
+}
+
+/**
+ * ieee80211_mps_set_sta_local_pm - set local PM towards a mesh STA
+ *
+ * @sta: mesh STA
+ * @pm: the power mode to set
+ */
+void ieee80211_mps_set_sta_local_pm(struct sta_info *sta,
+				    enum nl80211_mesh_power_mode pm)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+
+	mps_dbg(sdata, "local STA operates in mode %d with %pM\n",
+		pm, sta->sta.addr);
+
+	sta->local_pm = pm;
+
+	/*
+	 * announce peer-specific power mode transition
+	 * (see IEEE802.11-2012 13.14.3.2 and 13.14.3.3)
+	 */
+	if (sta->plink_state == NL80211_PLINK_ESTAB)
+		mps_qos_null_tx(sta);
+
+	ieee80211_mps_local_status_update(sdata);
+}
+
+/**
+ * ieee80211_mps_set_frame_flags - set mesh PS flags in FC (and QoS Control)
+ *
+ * @sdata: local mesh subif
+ * @sta: mesh STA
+ * @hdr: 802.11 frame header
+ *
+ * see IEEE802.11-2012 8.2.4.1.7 and 8.2.4.5.11
+ *
+ * NOTE: sta must be given when an individually-addressed QoS frame header
+ * is handled, for group-addressed and management frames it is not used
+ */
+void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata,
+				   struct sta_info *sta,
+				   struct ieee80211_hdr *hdr)
+{
+	enum nl80211_mesh_power_mode pm;
+	u8 *qc;
+
+	if (WARN_ON(is_unicast_ether_addr(hdr->addr1) &&
+		    ieee80211_is_data_qos(hdr->frame_control) &&
+		    !sta))
+		return;
+
+	if (is_unicast_ether_addr(hdr->addr1) &&
+	    ieee80211_is_data_qos(hdr->frame_control) &&
+	    sta->plink_state == NL80211_PLINK_ESTAB)
+		pm = sta->local_pm;
+	else
+		pm = sdata->u.mesh.nonpeer_pm;
+
+	if (pm == NL80211_MESH_POWER_ACTIVE)
+		hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_PM);
+	else
+		hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
+
+	if (!ieee80211_is_data_qos(hdr->frame_control))
+		return;
+
+	qc = ieee80211_get_qos_ctl(hdr);
+
+	if ((is_unicast_ether_addr(hdr->addr1) &&
+	     pm == NL80211_MESH_POWER_DEEP_SLEEP) ||
+	    (is_multicast_ether_addr(hdr->addr1) &&
+	     sdata->u.mesh.ps_peers_deep_sleep > 0))
+		qc[1] |= (IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8);
+	else
+		qc[1] &= ~(IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8);
+}
+
+/**
+ * ieee80211_mps_sta_status_update - update buffering status of neighbor STA
+ *
+ * @sta: mesh STA
+ *
+ * called after change of peering status or non-peer/peer-specific power mode
+ */
+void ieee80211_mps_sta_status_update(struct sta_info *sta)
+{
+	enum nl80211_mesh_power_mode pm;
+	bool do_buffer;
+
+	/*
+	 * use peer-specific power mode if peering is established and the
+	 * peer's power mode is known
+	 */
+	if (sta->plink_state == NL80211_PLINK_ESTAB &&
+	    sta->peer_pm != NL80211_MESH_POWER_UNKNOWN)
+		pm = sta->peer_pm;
+	else
+		pm = sta->nonpeer_pm;
+
+	do_buffer = (pm != NL80211_MESH_POWER_ACTIVE);
+
+	/* Don't let the same PS state be set twice */
+	if (test_sta_flag(sta, WLAN_STA_PS_STA) == do_buffer)
+		return;
+
+	if (do_buffer) {
+		set_sta_flag(sta, WLAN_STA_PS_STA);
+		atomic_inc(&sta->sdata->u.mesh.ps.num_sta_ps);
+		mps_dbg(sta->sdata, "start PS buffering frames towards %pM\n",
+			sta->sta.addr);
+	} else {
+		ieee80211_sta_ps_deliver_wakeup(sta);
+	}
+
+	/* clear the MPSP flags for non-peers or active STA */
+	if (sta->plink_state != NL80211_PLINK_ESTAB) {
+		clear_sta_flag(sta, WLAN_STA_MPSP_OWNER);
+		clear_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT);
+	} else if (!do_buffer) {
+		clear_sta_flag(sta, WLAN_STA_MPSP_OWNER);
+	}
+}
+
+static void mps_set_sta_peer_pm(struct sta_info *sta,
+				struct ieee80211_hdr *hdr)
+{
+	enum nl80211_mesh_power_mode pm;
+	u8 *qc = ieee80211_get_qos_ctl(hdr);
+
+	/*
+	 * Test Power Management field of frame control (PW) and
+	 * mesh power save level subfield of QoS control field (PSL)
+	 *
+	 * | PM | PSL| Mesh PM |
+	 * +----+----+---------+
+	 * | 0  |Rsrv|  Active |
+	 * | 1  | 0  |  Light  |
+	 * | 1  | 1  |  Deep   |
+	 */
+	if (ieee80211_has_pm(hdr->frame_control)) {
+		if (qc[1] & (IEEE80211_QOS_CTL_MESH_PS_LEVEL >> 8))
+			pm = NL80211_MESH_POWER_DEEP_SLEEP;
+		else
+			pm = NL80211_MESH_POWER_LIGHT_SLEEP;
+	} else {
+		pm = NL80211_MESH_POWER_ACTIVE;
+	}
+
+	if (sta->peer_pm == pm)
+		return;
+
+	mps_dbg(sta->sdata, "STA %pM enters mode %d\n",
+		sta->sta.addr, pm);
+
+	sta->peer_pm = pm;
+
+	ieee80211_mps_sta_status_update(sta);
+}
+
+static void mps_set_sta_nonpeer_pm(struct sta_info *sta,
+				   struct ieee80211_hdr *hdr)
+{
+	enum nl80211_mesh_power_mode pm;
+
+	if (ieee80211_has_pm(hdr->frame_control))
+		pm = NL80211_MESH_POWER_DEEP_SLEEP;
+	else
+		pm = NL80211_MESH_POWER_ACTIVE;
+
+	if (sta->nonpeer_pm == pm)
+		return;
+
+	mps_dbg(sta->sdata, "STA %pM sets non-peer mode to %d\n",
+		sta->sta.addr, pm);
+
+	sta->nonpeer_pm = pm;
+
+	ieee80211_mps_sta_status_update(sta);
+}
+
+/**
+ * ieee80211_mps_rx_h_sta_process - frame receive handler for mesh powersave
+ *
+ * @sta: STA info that transmitted the frame
+ * @hdr: IEEE 802.11 (QoS) Header
+ */
+void ieee80211_mps_rx_h_sta_process(struct sta_info *sta,
+				    struct ieee80211_hdr *hdr)
+{
+	if (is_unicast_ether_addr(hdr->addr1) &&
+	    ieee80211_is_data_qos(hdr->frame_control)) {
+		/*
+		 * individually addressed QoS Data/Null frames contain
+		 * peer link-specific PS mode towards the local STA
+		 */
+		mps_set_sta_peer_pm(sta, hdr);
+
+		/* check for mesh Peer Service Period trigger frames */
+		ieee80211_mpsp_trigger_process(ieee80211_get_qos_ctl(hdr),
+					       sta, false, false);
+	} else {
+		/*
+		 * can only determine non-peer PS mode
+		 * (see IEEE802.11-2012 8.2.4.1.7)
+		 */
+		mps_set_sta_nonpeer_pm(sta, hdr);
+	}
+}
+
+
+/* mesh PS frame release */
+
+static void mpsp_trigger_send(struct sta_info *sta, bool rspi, bool eosp)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct sk_buff *skb;
+	struct ieee80211_hdr *nullfunc;
+	struct ieee80211_tx_info *info;
+	u8 *qc;
+
+	skb = mps_qos_null_get(sta);
+	if (!skb)
+		return;
+
+	nullfunc = (struct ieee80211_hdr *) skb->data;
+	if (!eosp)
+		nullfunc->frame_control |=
+				cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+	/*
+	 * | RSPI | EOSP |  MPSP triggering   |
+	 * +------+------+--------------------+
+	 * |  0   |  0   | local STA is owner |
+	 * |  0   |  1   | no MPSP (MPSP end) |
+	 * |  1   |  0   | both STA are owner |
+	 * |  1   |  1   | peer STA is owner  | see IEEE802.11-2012 13.14.9.2
+	 */
+	qc = ieee80211_get_qos_ctl(nullfunc);
+	if (rspi)
+		qc[1] |= (IEEE80211_QOS_CTL_RSPI >> 8);
+	if (eosp)
+		qc[0] |= IEEE80211_QOS_CTL_EOSP;
+
+	info = IEEE80211_SKB_CB(skb);
+
+	info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER |
+		       IEEE80211_TX_CTL_REQ_TX_STATUS;
+
+	mps_dbg(sdata, "sending MPSP trigger%s%s to %pM\n",
+		rspi ? " RSPI" : "", eosp ? " EOSP" : "", sta->sta.addr);
+
+	ieee80211_tx_skb(sdata, skb);
+}
+
+/**
+ * mpsp_qos_null_append - append QoS Null frame to MPSP skb queue if needed
+ *
+ * To properly end a mesh MPSP the last transmitted frame has to set the EOSP
+ * flag in the QoS Control field. In case the current tailing frame is not a
+ * QoS Data frame, append a QoS Null to carry the flag.
+ */
+static void mpsp_qos_null_append(struct sta_info *sta,
+				 struct sk_buff_head *frames)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct sk_buff *new_skb, *skb = skb_peek_tail(frames);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	struct ieee80211_tx_info *info;
+
+	if (ieee80211_is_data_qos(hdr->frame_control))
+		return;
+
+	new_skb = mps_qos_null_get(sta);
+	if (!new_skb)
+		return;
+
+	mps_dbg(sdata, "appending QoS Null in MPSP towards %pM\n",
+		sta->sta.addr);
+	/*
+	 * This frame has to be transmitted last. Assign lowest priority to
+	 * make sure it cannot pass other frames when releasing multiple ACs.
+	 */
+	new_skb->priority = 1;
+	skb_set_queue_mapping(new_skb, IEEE80211_AC_BK);
+	ieee80211_set_qos_hdr(sdata, new_skb);
+
+	info = IEEE80211_SKB_CB(new_skb);
+	info->control.vif = &sdata->vif;
+	info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
+
+	__skb_queue_tail(frames, new_skb);
+}
+
+/**
+ * mps_frame_deliver - transmit frames during mesh powersave
+ *
+ * @sta: STA info to transmit to
+ * @n_frames: number of frames to transmit. -1 for all
+ */
+static void mps_frame_deliver(struct sta_info *sta, int n_frames)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
+	int ac;
+	struct sk_buff_head frames;
+	struct sk_buff *skb;
+	bool more_data = false;
+
+	skb_queue_head_init(&frames);
+
+	/* collect frame(s) from buffers */
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
+		while (n_frames != 0) {
+			skb = skb_dequeue(&sta->tx_filtered[ac]);
+			if (!skb) {
+				skb = skb_dequeue(
+					&sta->ps_tx_buf[ac]);
+				if (skb)
+					local->total_ps_buffered--;
+			}
+			if (!skb)
+				break;
+			n_frames--;
+			__skb_queue_tail(&frames, skb);
+		}
+
+		if (!skb_queue_empty(&sta->tx_filtered[ac]) ||
+		    !skb_queue_empty(&sta->ps_tx_buf[ac]))
+			more_data = true;
+	}
+
+	/* nothing to send? -> EOSP */
+	if (skb_queue_empty(&frames)) {
+		mpsp_trigger_send(sta, false, true);
+		return;
+	}
+
+	/* in a MPSP make sure the last skb is a QoS Data frame */
+	if (test_sta_flag(sta, WLAN_STA_MPSP_OWNER))
+		mpsp_qos_null_append(sta, &frames);
+
+	mps_dbg(sta->sdata, "sending %d frames to PS STA %pM\n",
+		skb_queue_len(&frames), sta->sta.addr);
+
+	/* prepare collected frames for transmission */
+	skb_queue_walk(&frames, skb) {
+		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+		struct ieee80211_hdr *hdr = (void *) skb->data;
+
+		/*
+		 * Tell TX path to send this frame even though the
+		 * STA may still remain is PS mode after this frame
+		 * exchange.
+		 */
+		info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
+
+		if (more_data || !skb_queue_is_last(&frames, skb))
+			hdr->frame_control |=
+				cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+		else
+			hdr->frame_control &=
+				cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
+
+		if (skb_queue_is_last(&frames, skb) &&
+		    ieee80211_is_data_qos(hdr->frame_control)) {
+			u8 *qoshdr = ieee80211_get_qos_ctl(hdr);
+
+			/* MPSP trigger frame ends service period */
+			*qoshdr |= IEEE80211_QOS_CTL_EOSP;
+			info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+		}
+	}
+
+	ieee80211_add_pending_skbs(local, &frames);
+	sta_info_recalc_tim(sta);
+}
+
+/**
+ * ieee80211_mpsp_trigger_process - track status of mesh Peer Service Periods
+ *
+ * @qc: QoS Control field
+ * @sta: peer to start a MPSP with
+ * @tx: frame was transmitted by the local STA
+ * @acked: frame has been transmitted successfully
+ *
+ * NOTE: active mode STA may only serve as MPSP owner
+ */
+void ieee80211_mpsp_trigger_process(u8 *qc, struct sta_info *sta,
+				    bool tx, bool acked)
+{
+	u8 rspi = qc[1] & (IEEE80211_QOS_CTL_RSPI >> 8);
+	u8 eosp = qc[0] & IEEE80211_QOS_CTL_EOSP;
+
+	if (tx) {
+		if (rspi && acked)
+			set_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT);
+
+		if (eosp)
+			clear_sta_flag(sta, WLAN_STA_MPSP_OWNER);
+		else if (acked &&
+			 test_sta_flag(sta, WLAN_STA_PS_STA) &&
+			 !test_and_set_sta_flag(sta, WLAN_STA_MPSP_OWNER))
+			mps_frame_deliver(sta, -1);
+	} else {
+		if (eosp)
+			clear_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT);
+		else if (sta->local_pm != NL80211_MESH_POWER_ACTIVE)
+			set_sta_flag(sta, WLAN_STA_MPSP_RECIPIENT);
+
+		if (rspi && !test_and_set_sta_flag(sta, WLAN_STA_MPSP_OWNER))
+			mps_frame_deliver(sta, -1);
+	}
+}
+
+/**
+ * ieee80211_mps_frame_release - release buffered frames in response to beacon
+ *
+ * @sta: mesh STA
+ * @elems: beacon IEs
+ *
+ * For peers if we have individually-addressed frames buffered or the peer
+ * indicates buffered frames, send a corresponding MPSP trigger frame. Since
+ * we do not evaluate the awake window duration, QoS Nulls are used as MPSP
+ * trigger frames. If the neighbour STA is not a peer, only send single frames.
+ */
+void ieee80211_mps_frame_release(struct sta_info *sta,
+				 struct ieee802_11_elems *elems)
+{
+	int ac, buffer_local = 0;
+	bool has_buffered = false;
+
+	/* TIM map only for LLID <= IEEE80211_MAX_AID */
+	if (sta->plink_state == NL80211_PLINK_ESTAB)
+		has_buffered = ieee80211_check_tim(elems->tim, elems->tim_len,
+				le16_to_cpu(sta->llid) % IEEE80211_MAX_AID);
+
+	if (has_buffered)
+		mps_dbg(sta->sdata, "%pM indicates buffered frames\n",
+			sta->sta.addr);
+
+	/* only transmit to PS STA with announced, non-zero awake window */
+	if (test_sta_flag(sta, WLAN_STA_PS_STA) &&
+	    (!elems->awake_window || !le16_to_cpu(*elems->awake_window)))
+		return;
+
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
+		buffer_local += skb_queue_len(&sta->ps_tx_buf[ac]) +
+				skb_queue_len(&sta->tx_filtered[ac]);
+
+	if (!has_buffered && !buffer_local)
+		return;
+
+	if (sta->plink_state == NL80211_PLINK_ESTAB)
+		mpsp_trigger_send(sta, has_buffered, !buffer_local);
+	else
+		mps_frame_deliver(sta, 1);
+}