diff --git a/drivers/leds/leds-qpnp-flash-v2.c b/drivers/leds/leds-qpnp-flash-v2.c
index 096ad39..2678a00 100644
--- a/drivers/leds/leds-qpnp-flash-v2.c
+++ b/drivers/leds/leds-qpnp-flash-v2.c
@@ -63,11 +63,13 @@
 #define	FLASH_LED_REG_MITIGATION_SEL(base)	(base + 0x6E)
 #define	FLASH_LED_REG_MITIGATION_SW(base)	(base + 0x6F)
 #define	FLASH_LED_REG_LMH_LEVEL(base)		(base + 0x70)
+#define	FLASH_LED_REG_MULTI_STROBE_CTRL(base)	(base + 0x71)
+#define	FLASH_LED_REG_LPG_INPUT_CTRL(base)	(base + 0x72)
 #define	FLASH_LED_REG_CURRENT_DERATE_EN(base)	(base + 0x76)
 
 #define	FLASH_LED_HDRM_VOL_MASK			GENMASK(7, 4)
 #define	FLASH_LED_CURRENT_MASK			GENMASK(6, 0)
-#define	FLASH_LED_ENABLE_MASK			GENMASK(2, 0)
+#define	FLASH_LED_STROBE_MASK			GENMASK(1, 0)
 #define	FLASH_HW_STROBE_MASK			GENMASK(2, 0)
 #define	FLASH_LED_ISC_WARMUP_DELAY_MASK		GENMASK(1, 0)
 #define	FLASH_LED_CURRENT_DERATE_EN_MASK	GENMASK(2, 0)
@@ -91,6 +93,9 @@
 #define	THERMAL_DERATE_SLOW_SHIFT		4
 #define	THERMAL_DERATE_SLOW_MASK		GENMASK(6, 4)
 #define	THERMAL_DERATE_FAST_MASK		GENMASK(2, 0)
+#define	LED1N2_FLASH_ONCE_ONLY_BIT		BIT(0)
+#define	LED3_FLASH_ONCE_ONLY_BIT		BIT(1)
+#define	LPG_INPUT_SEL_BIT			BIT(0)
 
 #define	VPH_DROOP_DEBOUNCE_US_TO_VAL(val_us)	(val_us / 8)
 #define	VPH_DROOP_HYST_MV_TO_VAL(val_mv)	(val_mv / 25)
@@ -174,6 +179,12 @@
 	LED3,
 };
 
+enum strobe_type {
+	SW_STROBE = 0,
+	HW_STROBE,
+	LPG_STROBE,
+};
+
 /*
  * Configurations for each individual LED
  */
@@ -194,7 +205,8 @@
 	u8				ires;
 	u8				hdrm_val;
 	u8				current_reg_val;
-	u8				trigger;
+	u8				strobe_ctrl;
+	u8				strobe_sel;
 	bool				led_on;
 };
 
@@ -232,6 +244,7 @@
 	int			thermal_thrsh1;
 	int			thermal_thrsh2;
 	int			thermal_thrsh3;
+	int			hw_strobe_option;
 	u32			led1n2_iclamp_low_ma;
 	u32			led1n2_iclamp_mid_ma;
 	u32			led3_iclamp_low_ma;
@@ -246,7 +259,6 @@
 	u8			chgr_mitigation_sel;
 	u8			lmh_level;
 	u8			iled_thrsh_val;
-	u8			hw_strobe_option;
 	bool			hdrm_auto_mode_en;
 	bool			thermal_derate_en;
 	bool			otst_ramp_bkup_en;
@@ -557,6 +569,28 @@
 			return rc;
 	}
 
+	if (led->pdata->hw_strobe_option > 0) {
+		rc = qpnp_flash_led_masked_write(led,
+				FLASH_LED_REG_STROBE_CFG(led->base),
+				FLASH_LED_STROBE_MASK,
+				led->pdata->hw_strobe_option);
+		if (rc < 0)
+			return rc;
+	}
+
+	if (led->fnode[LED3].strobe_sel == LPG_STROBE) {
+		rc = qpnp_flash_led_masked_write(led,
+			FLASH_LED_REG_MULTI_STROBE_CTRL(led->base),
+			LED3_FLASH_ONCE_ONLY_BIT, 0);
+		if (rc < 0)
+			return rc;
+
+		rc = qpnp_flash_led_masked_write(led,
+			FLASH_LED_REG_LPG_INPUT_CTRL(led->base),
+			LPG_INPUT_SEL_BIT, LPG_INPUT_SEL_BIT);
+		if (rc < 0)
+			return rc;
+	}
 	return 0;
 }
 
@@ -981,7 +1015,7 @@
 
 		led->fnode[i].led_on = false;
 
-		if (led->fnode[i].trigger & FLASH_LED_HW_SW_STROBE_SEL_BIT) {
+		if (led->fnode[i].strobe_sel == HW_STROBE) {
 			rc = qpnp_flash_led_hw_strobe_enable(&led->fnode[i],
 					led->pdata->hw_strobe_option, false);
 			if (rc < 0) {
@@ -1035,13 +1069,6 @@
 	if (rc < 0)
 		return rc;
 
-	rc = qpnp_flash_led_masked_write(led,
-					FLASH_LED_REG_STROBE_CFG(led->base),
-					FLASH_LED_ENABLE_MASK,
-					led->pdata->hw_strobe_option);
-	if (rc < 0)
-		return rc;
-
 	val = 0;
 	for (i = 0; i < led->num_fnodes; i++) {
 		if (!led->fnode[i].led_on ||
@@ -1049,13 +1076,13 @@
 			continue;
 
 		addr_offset = led->fnode[i].id;
-		if (led->fnode[i].trigger & FLASH_LED_HW_SW_STROBE_SEL_BIT)
-			mask = FLASH_HW_STROBE_MASK;
-		else
+		if (led->fnode[i].strobe_sel == SW_STROBE)
 			mask = FLASH_LED_HW_SW_STROBE_SEL_BIT;
+		else
+			mask = FLASH_HW_STROBE_MASK;
 		rc = qpnp_flash_led_masked_write(led,
 			FLASH_LED_REG_STROBE_CTRL(led->base + addr_offset),
-			mask, led->fnode[i].trigger);
+			mask, led->fnode[i].strobe_ctrl);
 		if (rc < 0)
 			return rc;
 
@@ -1073,7 +1100,7 @@
 
 		val |= FLASH_LED_ENABLE << led->fnode[i].id;
 
-		if (led->fnode[i].trigger & FLASH_LED_HW_SW_STROBE_SEL_BIT) {
+		if (led->fnode[i].strobe_sel == HW_STROBE) {
 			rc = qpnp_flash_led_hw_strobe_enable(&led->fnode[i],
 					led->pdata->hw_strobe_option, true);
 			if (rc < 0) {
@@ -1365,7 +1392,7 @@
 	const char *temp_string;
 	int rc, min_ma;
 	u32 val;
-	bool strobe_sel = 0, edge_trigger = 0, active_high = 0;
+	bool hw_strobe = 0, edge_trigger = 0, active_high = 0;
 
 	fnode->pdev = led->pdev;
 	fnode->cdev.brightness_set = qpnp_flash_led_brightness_set;
@@ -1484,14 +1511,52 @@
 		return rc;
 	}
 
-	strobe_sel = of_property_read_bool(node, "qcom,hw-strobe-sel");
-	if (strobe_sel) {
+	fnode->strobe_sel = SW_STROBE;
+	rc = of_property_read_u32(node, "qcom,strobe-sel", &val);
+	if (rc < 0) {
+		if (rc != -EINVAL) {
+			pr_err("Unable to read qcom,strobe-sel property\n");
+			return rc;
+		}
+	} else {
+		if (val < SW_STROBE || val > LPG_STROBE) {
+			pr_err("Incorrect strobe selection specified %d\n",
+				val);
+			return -EINVAL;
+		}
+		fnode->strobe_sel = (u8)val;
+	}
+
+	/*
+	 * LPG strobe is allowed only for LED3 and HW strobe option should be
+	 * option 2 or 3.
+	 */
+	if (fnode->strobe_sel == LPG_STROBE) {
+		if (led->pdata->hw_strobe_option ==
+				FLASH_LED_HW_STROBE_OPTION_1) {
+			pr_err("Incorrect strobe option for LPG strobe\n");
+			return -EINVAL;
+		}
+		if (fnode->id != LED3) {
+			pr_err("Incorrect LED chosen for LPG strobe\n");
+			return -EINVAL;
+		}
+	}
+
+	if (fnode->strobe_sel == HW_STROBE) {
 		edge_trigger = of_property_read_bool(node,
 						"qcom,hw-strobe-edge-trigger");
 		active_high = !of_property_read_bool(node,
 						"qcom,hw-strobe-active-low");
+		hw_strobe = 1;
+	} else if (fnode->strobe_sel == LPG_STROBE) {
+		/* LPG strobe requires level trigger and active high */
+		edge_trigger = 0;
+		active_high =  1;
+		hw_strobe = 1;
 	}
-	fnode->trigger = (strobe_sel << 2) | (edge_trigger << 1) | active_high;
+	fnode->strobe_ctrl = (hw_strobe << 2) | (edge_trigger << 1) |
+				active_high;
 
 	rc = led_classdev_register(&led->pdev->dev, &fnode->cdev);
 	if (rc < 0) {
@@ -1507,7 +1572,7 @@
 		fnode->strobe_pinctrl = NULL;
 	}
 
-	if (fnode->trigger & FLASH_LED_HW_SW_STROBE_SEL_BIT) {
+	if (fnode->strobe_sel == HW_STROBE) {
 		if (of_find_property(node, "qcom,hw-strobe-gpio", NULL)) {
 			fnode->hw_strobe_gpio = of_get_named_gpio(node,
 						"qcom,hw-strobe-gpio", 0);
@@ -1887,9 +1952,10 @@
 
 	led->pdata->vph_droop_hysteresis <<= FLASH_LED_VPH_DROOP_HYST_SHIFT;
 
+	led->pdata->hw_strobe_option = -EINVAL;
 	rc = of_property_read_u32(node, "qcom,hw-strobe-option", &val);
 	if (!rc) {
-		led->pdata->hw_strobe_option = (u8)val;
+		led->pdata->hw_strobe_option = val;
 	} else if (rc != -EINVAL) {
 		pr_err("Unable to parse hw strobe option, rc=%d\n", rc);
 		return rc;