S2io: Fix IOMMU overflow checking.
- Fix IOMMU overflow checking. As reported by Andi Kleen <ak@linux.intel.com>
removed check for zero dma address.
Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 51a9115..685030b 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -2501,6 +2501,9 @@
/**
* fill_rx_buffers - Allocates the Rx side skbs
* @ring_info: per ring structure
+ * @from_card_up: If this is true, we will map the buffer to get
+ * the dma address for buf0 and buf1 to give it to the card.
+ * Else we will sync the already mapped buffer to give it to the card.
* Description:
* The function allocates Rx side skbs and puts the physical
* address of these buffers into the RxD buffer pointers, so that the NIC
@@ -2518,7 +2521,7 @@
* SUCCESS on success or an appropriate -ve value on failure.
*/
-static int fill_rx_buffers(struct ring_info *ring)
+static int fill_rx_buffers(struct ring_info *ring, int from_card_up)
{
struct sk_buff *skb;
struct RxD_t *rxdp;
@@ -2637,17 +2640,16 @@
skb->data = (void *) (unsigned long)tmp;
skb_reset_tail_pointer(skb);
- /* AK: check is wrong. 0 can be valid dma address */
- if (!(rxdp3->Buffer0_ptr))
+ if (from_card_up) {
rxdp3->Buffer0_ptr =
pci_map_single(ring->pdev, ba->ba_0,
BUF0_LEN, PCI_DMA_FROMDEVICE);
- else
+ if (pci_dma_mapping_error(rxdp3->Buffer0_ptr))
+ goto pci_map_failed;
+ } else
pci_dma_sync_single_for_device(ring->pdev,
(dma_addr_t) rxdp3->Buffer0_ptr,
BUF0_LEN, PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(rxdp3->Buffer0_ptr))
- goto pci_map_failed;
rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
if (ring->rxd_mode == RXD_MODE_3B) {
@@ -2664,21 +2666,22 @@
if (pci_dma_mapping_error(rxdp3->Buffer2_ptr))
goto pci_map_failed;
- /* AK: check is wrong */
- if (!rxdp3->Buffer1_ptr)
+ if (from_card_up) {
rxdp3->Buffer1_ptr =
pci_map_single(ring->pdev,
ba->ba_1, BUF1_LEN,
PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(rxdp3->Buffer1_ptr)) {
- pci_unmap_single
- (ring->pdev,
- (dma_addr_t)(unsigned long)
- skb->data,
- ring->mtu + 4,
- PCI_DMA_FROMDEVICE);
- goto pci_map_failed;
+ if (pci_dma_mapping_error
+ (rxdp3->Buffer1_ptr)) {
+ pci_unmap_single
+ (ring->pdev,
+ (dma_addr_t)(unsigned long)
+ skb->data,
+ ring->mtu + 4,
+ PCI_DMA_FROMDEVICE);
+ goto pci_map_failed;
+ }
}
rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
rxdp->Control_2 |= SET_BUFFER2_SIZE_3
@@ -2813,7 +2816,7 @@
static int s2io_chk_rx_buffers(struct ring_info *ring)
{
- if (fill_rx_buffers(ring) == -ENOMEM) {
+ if (fill_rx_buffers(ring, 0) == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
}
@@ -2944,7 +2947,7 @@
rx_intr_handler(&mac_control->rings[i], 0);
for (i = 0; i < config->rx_ring_num; i++) {
- if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
+ if (fill_rx_buffers(&mac_control->rings[i], 0) == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
DBG_PRINT(INFO_DBG, " in Rx Netpoll!!\n");
break;
@@ -7183,7 +7186,7 @@
for (i = 0; i < config->rx_ring_num; i++) {
mac_control->rings[i].mtu = dev->mtu;
- ret = fill_rx_buffers(&mac_control->rings[i]);
+ ret = fill_rx_buffers(&mac_control->rings[i], 1);
if (ret) {
DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
dev->name);