USB Gadget driver for Samsung s3c2410 ARM SoC
This patch adds the support for the Usb Device Controller on Samsung
S3C24xx SoCs. This driver passes all tests from testusb (including #13)
and has been tested on S3C2410, S3C24212, and S3C2440 SoCs.
Whitespace updates, minor cleanups by David
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: Herbert Pötzl <herbert@13thfloor.at>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/gadget/s3c2410_udc.h b/drivers/usb/gadget/s3c2410_udc.h
new file mode 100644
index 0000000..9e0bece
--- /dev/null
+++ b/drivers/usb/gadget/s3c2410_udc.h
@@ -0,0 +1,110 @@
+/*
+ * linux/drivers/usb/gadget/s3c2410_udc.h
+ * Samsung on-chip full speed USB device controllers
+ *
+ * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard
+ * Additional cleanups by Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _S3C2410_UDC_H
+#define _S3C2410_UDC_H
+
+struct s3c2410_ep {
+ struct list_head queue;
+ unsigned long last_io; /* jiffies timestamp */
+ struct usb_gadget *gadget;
+ struct s3c2410_udc *dev;
+ const struct usb_endpoint_descriptor *desc;
+ struct usb_ep ep;
+ u8 num;
+
+ unsigned short fifo_size;
+ u8 bEndpointAddress;
+ u8 bmAttributes;
+
+ unsigned halted : 1;
+ unsigned already_seen : 1;
+ unsigned setup_stage : 1;
+};
+
+
+/* Warning : ep0 has a fifo of 16 bytes */
+/* Don't try to set 32 or 64 */
+/* also testusb 14 fails wit 16 but is */
+/* fine with 8 */
+#define EP0_FIFO_SIZE 8
+#define EP_FIFO_SIZE 64
+#define DEFAULT_POWER_STATE 0x00
+
+#define S3C2440_EP_FIFO_SIZE 128
+
+static const char ep0name [] = "ep0";
+
+static const char *const ep_name[] = {
+ ep0name, /* everyone has ep0 */
+ /* s3c2410 four bidirectional bulk endpoints */
+ "ep1-bulk", "ep2-bulk", "ep3-bulk", "ep4-bulk",
+};
+
+#define S3C2410_ENDPOINTS ARRAY_SIZE(ep_name)
+
+struct s3c2410_request {
+ struct list_head queue; /* ep's requests */
+ struct usb_request req;
+};
+
+enum ep0_state {
+ EP0_IDLE,
+ EP0_IN_DATA_PHASE,
+ EP0_OUT_DATA_PHASE,
+ EP0_END_XFER,
+ EP0_STALL,
+};
+
+static const char *ep0states[]= {
+ "EP0_IDLE",
+ "EP0_IN_DATA_PHASE",
+ "EP0_OUT_DATA_PHASE",
+ "EP0_END_XFER",
+ "EP0_STALL",
+};
+
+struct s3c2410_udc {
+ spinlock_t lock;
+
+ struct s3c2410_ep ep[S3C2410_ENDPOINTS];
+ int address;
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ struct s3c2410_request fifo_req;
+ u8 fifo_buf[EP_FIFO_SIZE];
+ u16 devstatus;
+
+ u32 port_status;
+ int ep0state;
+
+ unsigned got_irq : 1;
+
+ unsigned req_std : 1;
+ unsigned req_config : 1;
+ unsigned req_pending : 1;
+ u8 vbus;
+ struct dentry *regs_info;
+};
+
+#endif