s2io: Use generic MDIO definitions
Compile-tested only.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 1a4979f..80562ea 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -63,6 +63,7 @@
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/mdio.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -3328,9 +3329,9 @@
struct stat_block *stat_info = sp->mac_control.stats_info;
/* Check the communication with the MDIO slave */
- addr = 0x0000;
+ addr = MDIO_CTRL1;
val64 = 0x0;
- val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+ val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
if((val64 == 0xFFFF) || (val64 == 0x0000))
{
DBG_PRINT(ERR_DBG, "ERR: MDIO slave access failed - "
@@ -3338,24 +3339,24 @@
return;
}
- /* Check for the expecte value of 2040 at PMA address 0x0000 */
- if(val64 != 0x2040)
+ /* Check for the expected value of control reg 1 */
+ if(val64 != MDIO_CTRL1_SPEED10G)
{
DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - ");
- DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x2040\n",
- (unsigned long long)val64);
+ DBG_PRINT(ERR_DBG, "Returned: %llx- Expected: 0x%x\n",
+ (unsigned long long)val64, MDIO_CTRL1_SPEED10G);
return;
}
/* Loading the DOM register to MDIO register */
addr = 0xA100;
- s2io_mdio_write(MDIO_MMD_PMA_DEV_ADDR, addr, val16, dev);
- val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+ s2io_mdio_write(MDIO_MMD_PMAPMD, addr, val16, dev);
+ val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
/* Reading the Alarm flags */
addr = 0xA070;
val64 = 0x0;
- val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+ val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
flag = CHECKBIT(val64, 0x7);
type = 1;
@@ -3387,7 +3388,7 @@
/* Reading the Warning flags */
addr = 0xA074;
val64 = 0x0;
- val64 = s2io_mdio_read(MDIO_MMD_PMA_DEV_ADDR, addr, dev);
+ val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
if(CHECKBIT(val64, 0x7))
stat_info->xpak_stat.warn_transceiver_temp_high++;